YHD-101 Manual

March 25, 2018 | Author: Pruessada Deeying | Category: Personal Computers, Usb, Device Driver, Hdmi, Installation (Computer Programs)


Comments



Description

HongKong Yi Hao Da Co.,ltd Attn :James Email: [email protected] Skype: jamesluis1162 Manual YHD-101 1. Catalog Packing list 2.Equipment introduction 3.Device connection and setup 4.Drivers and software installation 5.Software settings and features 6.Print operation process 7.Pay attention to matters and daily maintenance .一.Packing list Product name Quantity KLD-LCD1260 light curing 3D printer 1 Taiwan HDMI HD line 1 pcs USB data line 1 pcs power line 1 pcs The power adapter 1 pcs Please do not hesitate to contact me if you received the goods and miss some parts . Equipment introduction .2. Connect the USB line.3.Device connection and setting 1. 3.Extract "drivers" and "Creation_Workshop_54" compressed packets to any folder 2. decompression decompression next to wait for the driver installation is complete.Drive installation: ( win8 win10 win7 system or no cut version of the system will automatically install the driver) Open the control panel to open the device manager to find other devices (see below). Please do not power on after the power plug is plugged in. Drivers and software installation 1. select update driver.Insert the power adapter into the printer. sleep mode.The computer power saving mode. the computer will add a monitor.Insert the USB line and HDMI line. 2. after decompression can be opened to use 3. select browse to find the driver to find the computer software "drivers" folder. the right mouse button. set the following methods: Open control panel → Screen resolution → To find the "multi monitor" selection of extended display→ Display selection screen 2→Resolution is set to 2560*1440→ apply 4.“Creation_Workshop_54”Control software. the HDMI line to the computer. Drive follows installation steps are as . screen saver mode all off! 4. re installation. can refer to the driver installation tutorial.Note: if you can not install the driver. many system components are removed. because the copycat system after slimming treatment. . resulting in the driver installation problems. as long as not genuine system will have some of this kind of situation. 5.Software setup and use A)first shown setthe device appiy B)software slice parameter introduction and setting port as . (the first layer of curing time is longer. etc.5-2) 6 platform lifting height (full size printing model proposed 4-5MM small model 1-2MM. the stronger the light penetration.05MM thickness. improve the smoothness of the model surface (generally set 1. the proposed set 0. and the use of the first layer of long time exposure of the number of layers.1 layer thickness. uplift is not enough. printing speed and precision are more ideal. the resin can not fully flow into the middle of the model. 7 platform uplift rate (the proposed set of 30-80. follow up according to personal experience. Set the range of 0. fell too fast may cause crushing model of small parts) 10 slice X axis mirror 11 slice Y mirror image (such as the model of the direction of the model can be set up) Note: for the first time. the more tight the base) 4 first layer number.1 (the smaller the thickness of the higher accuracy. such as the model of the large print. resulting in printing failure). transparent resin will appear over curing. make the corresponding adjustment (software package to set good parameters) C) software button introduction .0250. the proposed use of the default parameters. the speed is too fast a small part may be directly pulled bad) The rate of decline of 8 Platform (recommended to set the 80-150. but the printing time will be longer) 2 single exposure time. the proposed use of the 3 layer The 5 type fidelity value. it is recommended to use the default parameters to print.) 3 first exposure time. it is recommended to set the value of 8000-1300MS (the longer the single layer. support stl.) 11: mobile model (it is best not to move. rotation. such as moving. delete and other operations) 10: model information (such as model size. the button becomes gray 4: port connection button 5: slice button (press slice to the chip will automatically close the window. STL 3: connection button. one percent) 14: model rotation . you can choose the model tree in the model you want to edit.ojb. zoom. the output format CWS (this file can only be controlled software identification). etc. serious will be the whole groove resin curing. and damage the LCD core components) 9: model tree (such as import multiple models. do not press cancel) 6: start printing (note must be sliced after the printing) 7: suspension of printing (not recommended) 8: stop printing (please in the platform and the next move in the "suspension". can be added to support the model to save to the computer. narrowing the set of ninety-nine percent.1: open the file. volume. otherwise the light will always bright. connected to the printer.amf and other formats 2: save the file. because the move will eat a lot of computer memory) 12: model mirror image 13: model of the percentage of scaling (such as the set of 101% then model volume increased by one percent. that is. and the LCD panel will project model. cleaning the surface with a paper towel to clean the surface of residual alcohol. Import the model that needs to be printed. HDMI line and computer connection. if the model is too large. follow-up can continue to add material Platform back to the origin Press the print. . after cutting the model. the device can begin to work After the completion of the model printing. and then slice Check the trough and the platform. the platform will be clean and then loaded with a knife into the machine tool The model can be used for alcohol cleaning. if you find that you must clean out. etc. whether there are residues. added to the half of the trough can be. the utility model can be used to cut the model. otherwise it will damage the LCD panel Into the resin. large particles of dust. the power cord into the printer and boot Press the connection button and connect the printer to the computer.15: settings view 6.Print operation flow USB. after cleaning. If the equipment within 2 days without the use of materials. please pull the floating window to the central computer screen If the printing process. and then print 8 machine printing process. please back to the storage tank 7 after a long time. do not use sharp articles scraping shovel. so as not to damage the material groove from the film 5 print platform must be cleaned up. filter material. you can press the power button. if there is the installation of anti-virus software. 6.. please use the filter net. please do not operate the computer. If the printed model is defective. please pour out the material in the trough and check if there is any residue at the bottom of the feed chute. the emergence of an emergency.7.Matters needing attention and daily maintenance Please keep away from children in the use of equipment Please do not place the equipment in the environment without sunlight. in order to ensure the stability of the computer Do not move the mouse screen out of the printing process. (remember to unplug the USB line after power cut) Thank you for your support! . to print. can be loaded into the device. power outages. If there is a curing resin in the trough.
Copyright © 2024 DOKUMEN.SITE Inc.