XTG-101 UI Setup (eng).pdf

XTG-101 UI SetupUser’s Manual V 0.1 March 31, 2005 1 Xtramus Technologies E-mail: [email protected] Web: http://www.xtramus.com.tw/ Phone: +886-2-8227-6611 Fax: +886-2-8227-6622 Copyright Copyright © 2005 Xtramus Technologies. All Rights Reserved. The information contained in this document is the property of Xtramus Technologies. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, without the prior written permission of Xtramus Technologies. Disclaimer The information contained in this document is subject to change without notice and does not represent a commitment on the part of Xtramus Technologies. The information in this document is believed to be accurate and reliable, however, Xtramus Technologies assumes no responsibility or liability for any errors or inaccuracies that may appear in the document. Trademarks NuStreams-2000™ and NuStreams-600™ are trademarks or registered trademarks of Xtramus Technologies. All other trademarks and registered trademarks are the property of their respective owners. 2 3 . however caused and on any theory of liability. all implied warranties. non-infringement and fitness for a particular purpose. Defective Product under warranty shall be. if any. and the liability to Xtramus Technologies. consequential. repaired or replaced. under normal use and conditions.Warranty Xtramus Technologies warrants to recipient that hardware that it supplies with this document will be free from significant defects in materials and workmanship for a period of twelve (12) months from the date of delivery. or any special. are hereby excluded. direct. To the extent permitted by applicable law. indirect. In no event will Xtramus Technologies be liable for costs of procurement of substitute products or services. including but not limited to implied warranties of merchantability. arising in any way out of the sale and/or license of products or services to recipient even if advised of the possibility of such damages and notwithstanding any failure of essential purpose of any limited remedy. lost profits. at Xtramus Technologies’ discretion. for damages relating to any allegedly defective product shall be limited to the actual price paid by the purchaser for such product. or incidental damages. with or without modification. OR CONSEQUENTIAL DAMAGES (INCLUDING.2004 NetGroup. this list of conditions and the following disclaimer. EXEMPLARY. OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. LOSS OF USE. 4 . OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE. Redistributions of source code must retain the above copyright notice. INCIDENTAL. 3. Redistributions in binary form must reproduce the above copyright notice. Neither the name of the Politecnico di Torino nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. BUT NOT LIMITED TO. SPECIAL. WHETHER IN CONTRACT. Redistribution and use in source and binary forms.WinPcap: the Free Packet Capture Library for Windows Copyright Copyright (c) 1999 . PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES. BUT NOT LIMITED TO. OR PROFITS. INDIRECT. are permitted provided that the following conditions are met: 1. Politecnico di Torino (Italy). INCLUDING. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT. STRICT LIABILITY. this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. DATA. All rights reserved. 2. EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES. ..............................................................................................7.............................................................................. 6 1.....................................1 Configuring the Xtramus IP Sharing ...................................................................1 Step-by-Step Installation: .........3 Getting IP Automatically ....TABLE OF CONTENTS 1........................................................... 12 1................5 Installing the Utilities of Xtramus IP Sharing ....................................................................................7 Description and Configuration of Administration Interface..........5.... Software Installation and Configuration...................................................7...........................2 Connecting to the IP Sharing .............................................. 6 1................ 7 1......... 17 5 .... 6 1......................................................2 Advanced Setup ................6 Administration Interface ............... 7 1......... 6 1.. 7 1................................. 13 1..................................................4 Setting IP Address Manually.........1 Quick Setup.............. 11 1........ 2 Connecting to the IP Sharing One RJ-45 is supplied with the Xtramus IP Sharing. You need a Notebook PC or desktop PC connected to this product directly or through a switching hub and run the UI as a remote configuration terminal. and DNS may be obtained from the Xtramus IP Sharing. this product will act as a router and provide virtual IP address. The configuration of this product is done through an administration interface (UI). the other settings may need changing. Before installing this software. If you want to share a virtual IP or virtual IPs. this product should be turned ON and ready. Further.3 Getting IP Automatically The Xtramus IP Sharing is provided with a DHCP server.1 Configuring the Xtramus IP Sharing The Xtramus IP sharing can be configured to meet various usage conditions. 1. the power of IP sharing must be turned ON and the indicator lamps of WAN and LAN must be bright in ready state. 6 . Before using the IP sharing. When you finish the configuration.XTG-101 UI Setup User’s Manual 1. 1. the correct IP address. you may check the basic settings to guarantee that it will work in your environment. gateway. Some of the factory default settings may suit your usage. Note: When you connect this product to the WAN port of your ADSL/Cable modem. plug one end of the cable into the WAN port of this product and the other one into the Ethernet port of your ADSL or Cable modem. however. so the easy method is to set your PC to get its IP address automatically and reboot your computer. Software Installation and Configuration 1. Auto crossover function is designed into this product so you can use a straight-through or crossover Ethernet cable. Note: When your PC is rebooted. be sure to connect to the LAN port. Please connect one of the ends of RJ-45 to the LAN RJ-45 socket of this product and the other one to a network port of your computer host. 1 Step-by-Step Installation: 1.0 (same as the settings of this product) Default Gateway: 192.255.xxx (xxx can be any number between 2 and 254 that is not used by any device. For example: IP Address: 192.255.0 If you set your computer’s IP address manually.68.168.4 Setting IP Address Manually If you want to set your IP address manually. the utilities cannot automatically run and you may double click setup.) 1.1 (stands for this product) Preferred DNS Server: (You are allowed to input values at will.5.168. (If your system’s AUTO RUN function cannot work.1.exe if AUTO RUN function cannot work.1. Insert a companion CD attached with the Xtramus IP Sharing into your CD-ROM drive. (Double click setup. 1. the address must be on the same segment.5 Installing the Utilities of Xtramus IP Sharing Follow these steps below to install the utilities on your PC. you should know the following default settings of the Xtramus IP Sharing: IP Address: 192.1 (Default) Subnet Mask: 255.1.255.exe in a folder of the companion CD.255.) Subnet Mask: 255.) 7 .XTG-101 UI Setup User’s Manual 1.) Note: IP address cannot be same as default gateway. and the utilities will appear. Installing the Utilities (1) Insert the companion CD and the utilities will automatically run. XTG-101 UI Setup User’s Manual (2) Click “Next”. 8 . (4) Input a user name and organization as information and click “Next”. (5) A default destination folder and user information appear. Click “Install”. (3) After reading and accepting the License Agreement. Click “Next. (2) After reading and accepting the License Agreement.) 2.XTG-101 UI Setup User’s Manual (6) The XTG-101 software installation is finished. Click “Next. Click “Finish”. a WinPcap 3. Installing WinPcap (1) After installation of the software. (3) Read Readme information and Click “Next. a shortcut of ”xtg101 Setup” will appear on desktop. Click “Next”.1 beta3 InstallShield wizard appears immediately. 9 . (After installation. reboot your PC. Step 1: Click “Start”. Click “xtg101setup”.XTG-101 UI Setup User’s Manual (4) After installation. Step 4. Configuring the IP Sharing Executing XTG-101 Setup If there is any firewall function enabled in your PC. 3. 2. After clicking the execution file. you will see a menu as follows: 4. You must connect the WAN port of the Xtramus IP Sharing to your ADSL or Cable modem using a network cable. Step 3. a window will appear to ask you a password to enter the administration interface. Step 2: Select “Program Files”. Find “Xtramus”. Please double click the setup icon on desktop or follow the steps shown below to run the tool on your Windows operating system. When your PC is rebooted. Default Password: admin 10 . (Recommnded) Note: 1. Inputting the IP Sharing’s IP Address and Password When you run the tool. the power of IP sharing must be turned ON in ready state. please disable the function before executing XTG-101 Setup. However. If you forget the password. (If your computer’s IP address is the on the same subnet as the Xtramus IP Sharing (192.） 3. 11 . in consideration of safety. If you click ay other option. you will be directed to the page you clicked and lose your new settings! Setting Your Own Password You are given a default password.168. Input a password (admin (default)). The gateway address is not required to change.) The IP address can be any number from 2 to 254 that is not used by any device. Input the IP Sharing’s address (192. you will not connect to Internet.1). 2.x). Very Important: After entering data on any page. 1 2 3 4 Note: If you cannot find the Xtramus IP Sharing due to a problem in the IP settings.1. Select a network interface card (NIC). you will see the administration interface (also named “UI”) as shown below.XTG-101 UI Setup User’s Manual 1. 1.6 Administration Interface After successfully logging in. click “Reset” on the interface to recover to the default settings. remember to click the “Apply” button to save the settings.1. 4.168. Click “OK”. push and hold the “Restore” button over five seconds to restore factory default settings. it is recommended that you set your own password. If your ISP does. and then select a NIC.1. domain name is given as a rule.168.1. you may use “DOS prompt” to input “ipconfig/all” and then you will find 12-digit HEX numerals (00-1122-aa-bb-cc).255.) If your OS is Windows ME.251 12 .2 to 192. click “Start” → click “Run” and input “winipcfg”. 2000.0 DHCP Server Function: enabled IP Address Configured to PC: any of the addresses extended from 192.168.201 Given by ISP Subnet Mask Ex.1. 255.254 DNS Address Ex. a physical address of the NIC. you may confirm to your ISP the configured host (or a Host Name and domain names for broadband network service. Domain Name Ex.66.1 Subnet Mask: 255.66.81. (Do not select PPP adapter card.255.255. or XP.81.168.0 Address Gateway Address Ex.com (given by ISP) DSL Dynamic Mode PPPoE Account (given by ISP) Password (given by ISP) Static Mode (Addresses Given by ISP) Name IP Address Global Address Ex.81. if ISP asks one of the blank. please follow the instructions below to find your NIC’s MAC address. The blanks are Given by ISP) generally not filled.: . 203.XTG-101 UI Setup User’s Manual 1. CATV Dynamic Mode NIC Address At the time of installation. Alternatively.254 (total 253 addresses) WAN Port If you enable the DHCP Client function. Information Provided by ISP Before configuring the device. The defaults are as follows: LAN Port IP Address: 192.255. ISP (Internet Service Provider) may automatically complete the global port system configuration.66.7 Description and Configuration of Administration Interface Factory Default Settings Addresses of LAN and WAN Ports The parameters of LAN are factory defaults. you should gather the information as follows for your reference. and then click “Enter”. If your OS is Windows 98 or 95. click “Start” → click “Run” and input “command”. 203. 203. some ISPs may ask you to connect to Cable or DSL network interface card for registration of MAC address.mycompany. Device / PC Name For recognition. you can access to Internet. Back: back to last page Apply: click this button to complete all the settings.7. Broadcast Storm: When a large number of broadcast packets are sent. Start IP: You can set up the DHCP server in the blank of LAN configuration. some ISPs may ask some information for identification. a first address configured in the list. If you enable the option. a last address configured in the list. you will enter a main menu soon. Dynamic IP Setup: ISP give a dynamic IP to access Internet. When you get the address. However. Three setup items are provided on Quick Setup. network traffic jam will occur so as affect the bandwidth. (The IP Sharing is provided with a DHCP server for the LAN PC to get IP automatically. You can use this mode to get a dynamic IP address the DHCP from ISP. For example.255.) The option is enabled as default.1. There are two major setup items on the main menu. If you enable this function. the broadcast packet flow can be controlled for smooth network traffic. End IP: You can set up the DHCP server in the blank of LAN configuration.1 (default) Subnet Mask: 255. you do not input any data on this page.0 (default) LAN MAC Address: (a MAC Address of LAN) DHCP Server Address: If you disable the option. “Quick Setup” and “Advanced Setup”. 1.1 Quick Setup This item provides a user-friendly setup procedure and users follow only several steps to complete the work. DHCP will automatically distribute any IP address to your PC.168. LAN Address: 192. device / PC name and IP domain name will be identified. and thus each PC is not required to record and set its IP address.XTG-101 UI Setup User’s Manual Configuration of Administration Interface After successfully logging in. 13 . Please fill the required data to complete the setup. Generally. DHCP will not automatically distribute any IP address to your PC so that each PC is asked to assign a fixed IP address. shown as follows.255. Net Mask: 255. Net Mask. Address Setting IP Address: only a fixed IP. Back: back to last page Next: go to next page.255. If you enable this function. so you can select one of them and input it in the related blank. Gateway IP. Broadcast Storm: When a large number of broadcast packets are sent. It is important that ISP may give more than one IP address. comprising: IP Address. you must fill data given by your ISP. IP Configuration 14 . If you select this mode. network traffic jam will occur so as affect the bandwidth. if not.XTG-101 UI Setup User’s Manual Static IP Setup If you use this mode. the packets sent from WAN will have Tag-VID. the packets sent from WAN will not have Tag-VID. you must input an IP address given by ISP. the broadcast packet flow can be controlled for smooth network traffic. and DNS IP.255 Gateway IP: (given by your ISP) DNS IP: (given by your ISP) Flow Control: to control packet flow for smooth network traffic WAN Packet Tag-aware: to allow the packets sent from WAN to be attached with TagVID (Virtual IDentifier) If you enable this option.255. Thus. you may not enter some websites. Password: (given by ISP) The Characters you input in length cannot be more than 20 characters. If you enable this function. Confirm: input the password again for confirmation.255.168. Auto Connection / Disconnection: When the time of actions goes beyond the time set.0 (default) LAN MAC Address: (a MAC Address of LAN) DHCP Server Address: If you disable the option. PPPoE gives dial-up tool to save your time in running the PC program.1.) Reducing the packet length helps you to enter a specific website or speed up packet transmission. PPPoE Configuration If you use this mode. the broadcast packet flow can be controlled for smooth network traffic.255.1 (default) Subnet Mask: 255. network traffic jam will occur so as affect the bandwidth. 15 . (The IP Sharing is provided with a DHCP server for the LAN PC to get IP automatically. the IP Sharing will use PPPoE to connect to Internet. a last address configured in the list. DHCP will automatically distribute any IP address to your PC. If you enable the option. when a networking instruction is given again.XTG-101 UI Setup User’s Manual LAN IP Address: 192. MTU: input data for a proper MTU (1492 is a default/maximum. Broadcast Storm: When a large number of broadcast packets are sent. the product will disconnect. the product will connect soon. DHCP will not automatically distribute any IP address to your PC so that each PC is asked to assign a fixed IP address. The maximum transmission unit (MTU) function changes the maximum packet length depending on your request for excellent processing performance. it will save your money in visiting Internet. Back: back to last page Apply: click this button to complete all the settings. Account Account: a user name (account) given by ISP The Characters you input in length cannot be more than 20 characters.)) The option is enabled as default. and thus each PC is not required to record and set its IP address. a first address configured in the list. End IP: You can set up the DHCP server in the blank of LAN configuration. Start IP: You can set up the DHCP server in the blank of LAN configuration. However. if you input wrong data. ) (The option is enabled as default.168. If you enable the option. (The IP Sharing is provided with a DHCP server for the LAN PC to get IP automatically. If you want to keep the network constantly connected. End IP: You can set up the DHCP server in the blank of LAN configuration. a last address configured in the list.1. (If you select ADSL time accounting system.255. Back: back to last page Apply: click this button to complete all the settings.0 (default) LAN MAC Address: (a MAC Address of LAN) DHCP Server Address: If you disable the option. Broadcast Storm: When a large number of broadcast packets are sent. you may set an automatic disconnection time to save your money.) Start IP: You can set up the DHCP server in the blank of LAN configuration. 16 . and thus each PC is not required to record and set its IP address.XTG-101 UI Setup User’s Manual Disconnect: to allow you to set an automatic disconnection time after the network leaves unused. If you enable this function.255. you do not select “Enable”. IP Configuration LAN IP Address: 192. Flow Control: to control packet flow for smooth network traffic Back: back to last page Next: go to next page. DHCP will not automatically distribute any IP address to your PC so that each PC is asked to assign a fixed IP address. a first address configured in the list. the broadcast packet flow can be controlled for smooth network traffic. network traffic jam will occur so as affect the bandwidth.) The factory default setting is 30 minutes and you can input any numerals from 0 to 60 in the blank of Disconnect Time. DHCP will automatically distribute any IP address to your PC.1 (default) Subnet Mask: 255. the packets sent from WAN will have Tag-VID. 17 . System Status If you want to know the network connection status. you can click “Advanced Setup” or “Status” at the left side of the interface. If you enable this function. Flow Control: to control packet flow for smooth network traffic WAN Packet Tag-aware: to allow the packets sent from WAN to be attached with TagVID (Virtual IDentifier) If you enable this option. the packets sent from WAN will not have Tag-VID. Apply: click this button to complete all the settings. Port Forwarding and the like. Refresh: recover to all the defaults. Virtual Server. network traffic jam will occur so as affect the bandwidth.7.2 Advanced Setup A further setup items are provided. the broadcast packet flow can be controlled for smooth network traffic.XTG-101 UI Setup User’s Manual 1. if not. System Status Information Area LAN: (See “Quick Setup”) WAN Configuration DHCP Configuration WAN MAC Address: a MAC Address of WAN Broadcast Storm: When a large number of broadcast packets are sent. such as Fire Wall. XTG-101 UI Setup User’s Manual Static IP Configuration If you use this mode. if not. the packets sent from WAN will not have Tag-VID. 18 . If you enable this function. you must input an IP address given by ISP. so you can select one of them and input it in the related blank. Net Mask. Address Setting IP Address: only a fixed IP If you select this mode. comprising: IP Address. the packets sent from WAN will have Tag-VID. you must fill data given by your ISP.255. Net Mask: 255. It is important that ISP may give more than one IP address. network traffic jam will occur so as affect the bandwidth. the broadcast packet flow can be controlled for smooth network traffic. Apply: click this button to complete all the settings.255 Gateway IP: (given by your ISP) DNS IP: (given by your ISP) Flow Control: to control packet flow for smooth network traffic WAN Packet Tag-aware: to allow the packets sent from WAN to be attached with TagVID (Virtual IDentifier) If you enable this option. Gateway IP. and DNS IP. Refresh: recover to all the defaults. Broadcast Storm: When a large number of broadcast packets are sent.255. However. if you input wrong data. you do not select “Enable”.XTG-101 UI Setup User’s Manual PPPoE Configuration If you use this mode. it will save your money in visiting Internet. Flow Control: to control packet flow for smooth network traffic Refresh: recover to all the defaults. Account Account: a user name (account) given by ISP The Characters you input in length cannot be more than 20 characters. (If you select ADSL time accounting system. Password: (given by ISP) The Characters you input in length cannot be more than 20 characters. the product will connect soon. Apply: click this button to complete all the settings. Thus. 19 . The maximum transmission unit (MTU) function changes the maximum packet length depending on your request for excellent processing performance. the product will disconnect. Auto Connection / Disconnection: When the time of actions goes beyond the time set. you may not enter some websites. PPPoE gives dial-up tool to save your time in running the PC program. Confirm: input the password again for confirmation.) The factory default setting is 30 minutes and you can input any numerals from 0 to 60 in the blank of Disconnect Time. MTU: input data for a proper MTU (1492 is a default/maximum. the IP Sharing will use PPPoE to connect to Internet. Disconnect: to allow you to set an automatic disconnection time after the network leaves unused. If you want to keep the network constantly connected. you may set an automatic disconnection time to save your money. when a networking instruction is given again.) Reducing the packet length helps you to enter a specific website or speed up packet transmission. XTG-101 UI Setup User’s Manual Firewall Configuration Filter IP The function allows you to block packets with specific source IP addresses from WAN. you must be cautious when using this function. Drop MAC: When this function is enabled. NAT Configuration 20 . packets can be sent from WAN. However. you can use this useful function. Apply: click this button to complete all the settings. DMZ DMZ allows you to open a PC on Internet so that all the packets streamed into are resent to the PC you configured. Enable Forwarding Multicast: When this function is enabled. Other Setting Enable Filtering Ping Packet: When this function is enabled. You can fill data in IP Address and select “Enable” to use this function. specific MAC address packets can be dropped. Refresh: recover to all the defaults. When you run some applications and do not know which port you can use. ping packets can be filtered. You can determine to enable this function for IP address and mask. Protocol: Communication protocol types are shown in the blank. If a destination communication port for packets received is exactly the connection port. Click “Apply” to save your new password. Virtual servers can be added with port number. Virtual Server: IP Sharing has a virtual server function. FTP(21). the IP Sharing will let the user pass and allocate it to the virtual server.XTG-101 UI Setup User’s Manual Port Forwarding: This function allows you enable specific TCP or UDP or both of the two to communicate with a PC or PCs connected to this product. IP Address: a destination IP address to re-send the packets you requested Port: to allow you to input a communication port number. (See details below. a virtual server can be set according to some specific port numbers of server in common use. you will see a prompt menu and you can determine the reset or not on this prompt menu. E-Mail server. If this function is enabled. When you click this item. You can enter any available characters between 5-16 characters long but cannot leave a space between the characters. you can reset the IP Sharing to its factory settings.) Note: The password is case sensitive. the received packets will be re-sent to an IP address specified in LAN IP. into your own password. “admin”. When an internal user want to enter the internal server (such as Web server. Refresh: recover to all the defaults. such as WEB(80). and Telnet(23). and News server). Change Password On this page. 21 . Pass Through IP Address: This function allows packets with IP address you set to pass through from WAN. you can change the default password. FTP server. Apply: click this button to complete all the settings. Reset You can use “Reset” in “Advanced Setup” to recover to the factory default settings. If you forget the Xtramus IP Sharing’s password. You can select a language you want. English.com Web: http://www.com. Traditional Chinese. Click this button to exit.tw/ Phone: +886-2-8227-6611 Fax: +886-2-8227-6622 22 .XTG-101 UI Setup User’s Manual If you want to exit from this administration interface. Xtramus Technologies E-mail: [email protected]. You can select a language you want. and Simplified Chinese. This tool provides 3 language interfaces. click the leftward “Exit” button.