WH2009_WaterHorseCatalog

www.franklin-electric.com TABLE OF CONTENTS Model Number Nomenclature ..........................................2 Submersible Pumps: 4" Standard Capacity Pumps Features & Ordering Information ...............................4 5 gpm ............................................................................8 7 gpm ..........................................................................10 10 gpm ........................................................................12 15 gpm ........................................................................14 20 gpm ........................................................................18 Dimensions ..................................................................22 4" High Capacity Pumps Features & Ordering Information .............................24 30 gpm ........................................................................26 50 gpm ........................................................................28 85 gpm ........................................................................32 6" High Capacity Pumps Features & Ordering Information .............................34 50 gpm ........................................................................36 75 gpm ........................................................................38 100 gpm ......................................................................40 125 gpm ......................................................................42 4" E-Series Environmental Pumps Features.......................................................................44 Thermoplastic Ordering Information .......................45 10 gpm ........................................................................46 20 gpm ........................................................................48 Stainless Steel Ordering Information ........................50 35 gpm ........................................................................52 45 gpm ........................................................................54 60 gpm ........................................................................56 90 gpm ........................................................................58 Submersible Pump Accessories ...................................60 Horizontal Booster Pumps WHB Series...................................................................73 Vertical Booster Pumps V6 Series ......................................................................82 Motors, Drives and Controls: Submersible Motors 4" Submersible Motors ...............................................86 6" Submersible Motors ...............................................97 Controls Control Boxes............................................................107 Protection Pumptec Family .......................................................109 Three-Phase Panel ...................................................111 SubMonitor................................................................113 Accessories ...............................................................114 Drives SubDrive / MonoDrive .............................................115 References: Friction Loss ...................................................................117 Pipe Fittings...................................................................120 Pressure Loss .................................................................121 Pressure Tank Sizing ......................................................123 Reference Tables .........................................................124 Conversions ..................................................................125 Warranty Information: Lost or Damaged Goods ............................................126 Limited Warranty..........................................................127 Non-Submersible Pumps: Shallow Well Jet Pumps WJS Series....................................................................61 Convertible Jet Pumps WJC Series ..................................................................64 Jet Pump Accessories ...................................................66 AQ80 ...........................................................................67 Air Charger Kit ............................................................68 Self-Priming Sprinkler Pumps WSP Series ...................................................................69 End Suction Centrifugal Pumps WCE Series ..................................................................71 For the most up-to-date product information, visit water.franklin-electric.com 5 7 10 10 15 15 20 20 hp Code 25 25 30 30 35 35 40 40 50 50 60 60 75 75 100 100 125 125 150 150 175 175 200 200 Material Codes: CI = Cast Iron P = Plastic S = Stainless Steel 2 .MODEL NUMBER NOMENCLATURE Submersible Series Codes: WA = Water Horse 4" Pump WE = Water Horse Environmental WH = Water Horse Brand Non-Submersible Series Codes: WJS = Shallow Well Jet WJC = Convertible Well WSP = Self-Priming Sprinkler Pump WCE = End Suction Centrifugal WHB = Horizontal Booster WVB = Vertical Booster Horsepower Codes: hp Code 1/3 03 1/2 05 3/4 07 1 1 1.5 15 2 2 3 3 5 5 7 . Plastic. Water Horse. Shallow Well Jet. 3W. 230. 3 hp. S = Stainless Horsepower Series Gallons or Liters per Minute Examples: 45WA1S4-2W230 = 45 gpm.H = Water Horse. 50 Hz Pump End BSPP Threads Jet Pumps: W JC 05 CI Material Horsepower Series Brand Examples: WJC07CI = Water Horse. Water Horse. Cast Iron WJS1CI . PEX = 50 Hz Pump End.5 hp. 460. etc. 3/4 hp. Water Horse E-Series. Stainless Steel / 1. or 3P Pump size P = Plastic. 115. S = Stainless Horsepower Series Gallons or Liters per Minute Examples: 85WA3S4-PE = 45 gpm. Water Horse High Capacity.MODEL NUMBER NOMENCLATURE 4" 5-20 gpm Submersible Pump/Motors: Pump info Motor info 35 WA 15 S 4 . 1 hp.PE PE = Pump End. 1 hp. Stainless Steel / 1 hp.3W 230 Voltage. Convertible Jet. Cast Iron. Stainless Steel. PEXB = 50 Hz BSPP Pump size P = Plastic. 230V. 2W. 230V. 2-wire motor 35WA15SA-3W230 = 35 gpm. 3-wire motor Pump End: Pump info 90 WA 5 S 4 . Pump End 25WE1P4-PEXB = 25 gpm. High Head 3 . 10. 7. NRTL/C CSA 108 UL 778 4 . ■ Built-in removable valve keeps water in your system at all times. premium materials at a competitive price. ■ Available with thermoplastic or stainless steel discharge and motor bracket. ■ Celcon® disk allows for close tolerances for increased performance. 7.5. ■ Thermoplastic impellers and stages for maximum efficiency. Celcon® is a registered trademark of the Celanese Corporation. 10. ■ Sintered stainless steel top bearing to provide years of trouble-free service. 15. 15 and 20 gpm. ■ Powered by Franklin corrosion-resistant submersible motors. consult factory for further details. ■ Stainless steel shaft features high quality.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 5. ■ Stainless steel upthrust washer prevents excessive wear in severe applications. ■ Hex rubber-top bearing has an extra large surface area to assure shaft stability and multiple flow channels to keep small particulates away from bearing surfaces. ■ Removable suction screen prevents debris from clogging impellers and provides full flow performance. and 20 gpm Models Features: ■ 5 performance ranges . ■ Maximum water temperature with proper flow is 120 °F (49 °C). Model No. 2-3 for model number explanation) 1/2 .5 17 230 10WA15P4-2W230 94321025 10WA15P4-3W230 94321050 3/4 8 230 15WA07P4-2W230 94321505 15WA07P4-3W230 94320720 1 10 230 15WA1P4-2W230 94321510 15WA1P4-3W230 94320725 1.5 21 230 7WA15P4-2W230 94320725 7WA15P4-3W230 94320750 1/2 7 115 10WA05P4-2W115 94321005 10WA05P4-3W115 94321030 1/2 7 230 10WA05P4-2W230 94321010 10WA05P4-3W230 94321035 3/4 9 230 10WA07P4-2W230 94321015 10WA07P4-3W230 94321040 1 12 230 10WA1P4-2W230 94321020 10WA1P4-3W230 94321045 1. Order No. Order No. 5 .SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 5-20 gpm Thermoplastic Units Ordering Information (See pgs.5 9 230 20WA15P4-2W230 94322015 20WA15P4-3W230 94322030 Notes: All listed above have 1-1/4" NPT discharge and feature our removable Flomatic™ poppet assembly. 1/2 13 115 5WA05P4-2W115 94320505 5WA05P4-3W115 94320525 1/2 13 230 5WA05P4-2W230 94320510 5WA05P4-3W230 94320530 3/4 18 230 5WA07P4-2W230 94320515 5WA07P4-3W230 94320535 1 21 230 5WA1P4-2W230 94320520 5WA1P4-3W230 94320540 1/2 9 115 7WA05P4-2W115 94320705 7WA05P4-3W115 94320730 1/2 9 230 7WA05P4-2W230 94320710 7WA05P4-3W230 94320735 3/4 12 230 7WA07P4-2W230 94320715 7WA07P4-3W230 94320740v 1 15 230 7WA1P4-2W230 94320720 7WA1P4-3W230 94320745 1.1.5 14 230 15WA15P4-2W230 94321515 15WA15P4-3W230 94320730 3/4 5 230 20WA07P4-2W230 94322005 20WA07P4-3W230 94322020 1 7 230 20WA1P4-2W230 94322010 20WA1P4-3W230 94322025 1.5 HP Single-Phase Units GPM 5 7 10 15 20 2-Wire 3-Wire HP Stages Volts Model No. Order No. Model No. 2-3 for model number explanation) 1/2 . 1/2 13 115 5WA05S4-2W115 94350505 5WA05S4-3W115 94350525 1/2 13 230 5WA05S4-2W230 94350510 5WA05S4-3W230 94350530 3/4 18 230 5WA07S4-2W230 94350515 5WA07S4-3W230 94350535 1 21 230 5WA1S4-2W230 94350520 5WA1S4-3W230 94350540 1/2 9 115 7WA05S4-2W115 94350705 7WA05S4-3W115 94350730 1/2 9 230 7WA05S4-2W230 94350710 7WA05S4-3W230 94350735 3/4 12 230 7WA07S4-2W230 94350715 7WA07S4-3W230 94350740 1 15 230 7WA1S4-2W230 94350720 7WA1S4-3W230 94350745 1.5 21 230 7WA15S4-2W230 94350725 7WA15S4-3W230 94350750 1/2 7 115 10WA05S4-2W115 94351005 10WA05S4-3W115 94351030 1/2 7 230 10WA05S4-2W230 94351010 10WA05S4-3W230 94351035 3/4 9 230 10WA07S4-2W230 94351015 10WA07S4-3W230 94351040 1 12 230 10WA1S4-2W230 94351020 10WA1S4-3W230 94351045 1.5 14 230 15WA15S4-2W230 94351515 15WA15S4-3W230 94351530 3/4 5 230 20WA07S4-2W230 94352005 20WA07S4-3W230 94352020 1 7 230 20WA1S4-2W230 94352010 20WA1S4-3W230 94352025 1.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 5-20 gpm Stainless Steel Units Ordering Information (See pgs. .5 17 230 10WA15S4-2W230 94351025 10WA15S4-3W230 94351050 3/4 8 230 15WA07S4-2W230 94351505 15WA07S4-3W230 94351520 1 10 230 15WA1S4-2W230 94351510 15WA1S4-3W230 94351525 1.5 HP Single-Phase Units GPM 5 7 10 15 20 2-Wire 3-Wire HP Stages Volts Model No.1. Order No.5 9 230 20WA15S4-2W230 94352015 20WA15S4-3W230 94352030 Notes: All listed above have 1-1/4" NPT discharge and feature our removable 6 Flomatic™ poppet assembly. 5 21 7WA15S4-PE 94360720 2 24 7WA2S4-PE 94360725 1/2 7 10WA05S4-PE 94361005 3/4 9 10WA07S4-PE 94361010 1 12 10WA1S4-PE 94361015 1. Order No.1. 2-3 for model number explanation) Stainless Steel 1/2 . 1/2 13 5WA05P4-PE 94330505 3/4 18 5WA07P4-PE 94330510 1 21 5WA1P4-PE 94330515 1/2 9 7WA05P4-PE 94330705 3/4 12 7WA07P4-PE 94330710 1 15 7WA1P4-PE 94330715 1.5 HP Pump Ends GPM 5 HP Stages Model No.5 HP Pump Ends Thermoplastic 1/2 .5 14 15WA15P4-PE 94331515 3/4 5 20WA07P4-PE 94332005 1 7 20WA1P4-PE 94332010 1.5 28 5WA15S4-PE 94360520 1/2 9 7WA05S4-PE 94360705 3/4 12 7WA07S4-PE 94360710 1 15 7WA1S4-PE 94360715 1.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 5-20 gpm Pump Ends Only Ordering Information (See pgs.5 14 15WA15S4-PE 94361515 2 18 10WA2S4-PE 94361520 3 24 10WA3S4-PE 94361525 3/4 5 20WA07S4-PE 94362005 1 7 20WA1S4-PE 94362010 1.5 9 20WA15S4-PE 94362015 2 11 20WA2S4-PE 94362020 3 15 20WA3S4-PE 94362025 5 25 20WA5S4-PE 94362030 7 . Order No.5 17 10WA15P4-PE 94331020 GPM 5 7 7 10 10 15 20 3/4 8 15WA07P4-PE 94331505 1 10 15WA1P4-PE 94331510 1. 1/2 13 5WA05S4-PE 94360505 3/4 18 5WA07S4-PE 94360510 1 21 5WA1S4-PE 94360515 1.5 17 10WA15S4-PE 94361020 2 19 10WA2S4-PE 94361025 3 26 10WA3S4-PE 94361030 3/4 8 15WA07S4-PE 94361505 1 10 15WA1S4-PE 94361510 1.5 21 7WA15P4-PE 94330720 1/2 7 10WA05P4-PE 94331005 3/4 9 10WA07P4-PE 94331010 1 12 10WA1P4-PE 94331015 1.5 9 20WA15P4-PE 94332015 15 20 HP Stages Model No. SUBMERSIBLE PUMPS 4" Standard Capacity Pumps PUMP OPERATING RANGE FEET METERS 5 gpm Performance Curves 260 240 BEST EFFICIENCY RANGE 1.2 2 0.2 6 1.4 7 1.2 GPM 40 100 20 0 0 0 0.5 HP 800 220 700 200 180 1 HP 600 3/4 HP 160 500 140 120 400 1/2 HP 100 300 60 20 FT 80 200 0.8 M3PH .6 4 0.4 3 0.0 8 1 0.0 1.6 8 GPM 1.8 5 1. 9 1.8 1.1 5.1 6. in Feet Shaded Areas Indicate Most Efficient Performance PSI 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 20 30 1/2 40 7.2 5.6 5.4 4.4 4.4 7. or Lift.6 6.5 3.9 6.3 7.0 0 1.7 6.4 7.9 4.1 Shut-off 850 ft HP 22 Notes: 1.2 6.6 4.8 6.3 7. 2.5 5.5 3.7 6.5 6.7 3.7 7.8 1.2 4.9 60 7.9 5.2 2.2 2.8 2.7 6.7 6.3 2.1 5.0 6.9 6.5 6.6 5.7 6.2 6.9 Shut-off 625 ft 20 0 4.9 7.5 3.2 5.7 4.4 3.9 1.4 5.4 30 1 40 50 7.0 1.3 7.9 6.9 4.0 6.5 7.6 6.4 50 60 7.6 3.8 2.3 5.8 4.2 6.8 4.3 6.4 6.7 4.2 6.8 6.9 5.7 Shut-off 390 ft 60 82 61 39 17 7.2 50 7.7 2.4 30 3/4 40 7.1 4.1 4.4 7.6 6.1 7.1 0 20 7.7 5.6 1.3 4.2 80 6.8 7.8 6.2 6.2 7.3 6.6 4.3 5.5 5.1 5.5 50 7.5 7.4 4.2 3.0 3.5 5.7 2.2 7.5 3.7 1.4 245 236 227 219 210 201 193 184 162 141 119 97 76 54 32 11 7.2 3.3 5.4 6.4 7.0 6.1 6.4 5.3 5.6 4.0 Shut-off PSI 160 152 143 134 126 117 108 100 91 0 20 7.4 6.6 6.5 7.0 2.1 5.7 2.9 3.7 2.2 4.7 4.1 3.8 7.6 6.3 7.7 5.0 5.9 6. Gallons per Minute Depth to Pumping Water Level.6 5.1 6.5 Shut-off 540 ft 40 80 7.4 6.1 6.1 20 7.3 6.1 6.7 6.0 4.9 4.0 5.2 6.3 3.1 4.6 7.0 6.2 7.8 7.0 4.5 7.1 3.5 3.3 7.3 5.1 4.4 7.9 Shut-off PSI 225 217 208 199 191 182 173 165 156 147 126 104 82 61 39 17 7.7 60 7.5 4.4 1.0 3.7 3.0 2.2 6.0 3.3 2.6 2.5 3.8 3.4 2.6 5.2 30 7.0 7.0 5.7 4.6 3.2 5.8 4.9 6.5 7.1 80 Shut-off PSI 359 351 342 333 325 316 307 299 7.1 3.9 5.9 6. Performance shown does not include friction loss in the drop pipe. 9 .3 1.2 3.8 5.1 6.5 5.0 4.4 5.9 6.1 4.2 2.7 4.5 6.4 5.3 7.1 5.8 6.5 3.1 3.2 7.0 5.1 6.8 6.6 4.1 5.4 5.9 6.0 5.5 7.2 3.3 7.4 4.5 1.6 4.8 3.0 3.5 6.7 6.6 6.8 5.6 2.S.3 2.3 7.5 60 80 Shut-off PSI 262 253 7.0 1.3 2.1 6.7 2.5 6.9 5.0 6.9 6.7 5.6 40 7.2 290 281 260 238 217 195 173 152 130 108 87 65 43 2.1 5.4 3.7 5.4 7.1 6.4 3.3 6.4 2.0 6.8 5.6 4.4 5.9 7.2 4.9 3.1 2.9 6.0 6. All performance data is based on rated motor nameplate voltage.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 5 gpm Performance Charts Capacities in U.0 4.3 7.7 6.3 4. 2 GPM 60 200 150 40 100 20 0 50 0 0 0.5 M3PH .0 10 11 12 GPM 2.0 6 7 1.5 HP 180 600 550 160 500 140 450 120 400 1 HP 3/4 HP 350 100 300 1/2 HP 10 FT 80 250 0.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps PUMP OPERATING RANGE BEST EFFICIENCY RANGE FEET METERS 7 gpm Performance Curves 2 HP 220 700 200 650 1.0 10 1 2 0.5 8 9 2.5 3 4 5 1. 5 8.1 80 10.4 9.2 113 9. Performance shown does not include friction loss in the drop pipe.1 104 4.7 5.2 4.0 8.1 6.4 152 143 134 126 117 108 87 65 43 22 9.8 8.6 7.1 8.2 6.8 30 1.0 3.3 30 1 60 80 Shut-off PSI 186 178 169 160 32 10 9.0 6.3 5.3 7.8 3.4 7.0 7.7 61 52 43 35 9.0 180 158 136 115 93 60 80 Shut-off PSI 258 249 240 232 223 214 206 197 188 0 2.1 3.6 40 10.7 2.0 9.0 8.8 40 9.3 5.6 7.3 7.9 8.7 7.7 30 1/2 40 9.7 5.4 50 60 6.1 3.0 95 4.7 9.9 8.4 4.5 7.1 10.1 7.8 4.4 8.0 Shut-off PSI 8.3 10.4 8.7 9.0 6.8 3.4 7.0 7.0 3.4 3.0 6.4 6.1 7.9 9.4 9.4 9.5 7. All performance data is based on rated motor nameplate voltage.8 8.2 8.2 5.6 7.0 5.2 7.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 7 gpm Performance Charts Capacities in U.9 9.8 7.2 7.9 7.0 8.9 8.5 7.0 Shut-off 374 ft 40 0 9.0 Shut-off 615 ft PSI 71 50 28 6 30 9 9.8 6.8 60 10.7 6.1 2.0 3.9 3.6 145 136 127 119 110 101 93 54 0 20 9.3 8.0 3.3 4.5 6. in Feet Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 9.2 8.6 9.6 8.S.7 8.0 9.5 2.8 6.1 6.9 30 9.2 6.0 7. or Lift.7 4.4 4.1 50 9.5 8.9 87 78 69 6.1 182 160 139 117 95 Shut-off PSI 303 294 286 277 268 260 251 242 234 225 204 74 52 30 Shut-off 720 ft HP 9 Notes: 1.5 8. Gallons per Minute 20 9.0 8.1 0 20 30 3/4 60 9.5 9.4 5.1 Shut-off 450 ft 20 Depth to Pumping Water Level.5 8.2 8.4 6.8 9.2 7.6 8.2 8.6 6.8 8.9 7.3 5.9 40 50 3.0 6.8 7.9 9.7 7.7 9.4 80 Shut-off PSI 153 13 9.5 6.8 3.9 5.2 80 9.9 9. 2.0 8.9 8.2 5.5 8.9 5.2 8.0 8.5 5.5 6.3 5.8 8.6 8.2 7.6 6.0 8.9 3.3 3.2 84 75 40 50 4. 11 .7 7.8 9.2 7.7 8.8 7.8 9.3 20 9.0 8.8 4.5 50 9.3 0 20 9.8 9.8 9.7 9.3 Shut-off 280 ft 60 9.8 5.5 6. 2 9.8 95 87 Shut-off PSI 12 12.6 10.3 8.2 10.0 61 52 7.5 7.S.2 50 60 12.0 78 7. or Lift.6 13.1 10.4 40 12.5 14 3.2 11.0 12 2.5 10 2.0 16 GPM 3.5 1. in Feet Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 0 14.5 HP 500 1 HP 400 100 20 FT 150 3/4 HP 300 0. Gallons per Minute HP PSI 20 40 60 Depth to Pumping Water Level.1 5.6 9.5 9.4 11.8 8.9 6.0 2 4 6 0.8 3.5 Shut-off 240 ft 20 4.2 5.0 12.9 10.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps Meters 10 gpm Performance Curves and Charts Feet PUMP OPERATING RANGE BEST EFFICIENCY RANGE 300 3 HP 900 250 800 700 2 HP 200 600 1.7 80 8.5 M3PH Capacities in U.2 3.8 69 43 35 26 17 .2 GPM 1/2 HP 200 50 100 0 0 0 0.0 8 1.9 9.2 8.7 30 1/2 13. 5 9.1 13.4 11.0 372 364 355 346 338 329 320 312 303 294 273 251 229 208 186 165 143 121 100 Notes: 1.0 40 13.9 3.4 11.0 5.5 11.8 8.0 48 26 13.9 20 13.3 10.9 12.S.7 12.5 4.1 9. 6.2 8.2 40 13.3 30 13.6 12.7 12.9 11.4 12.7 9.1 11.6 8.3 9.3 12.9 19 13.9 40 13.8 11.4 9.6 8.5 50 13.2 20 13.9 10.9 12.1 8.0 11.4 11.1 10.3 8.2 11.2 9.7 50 60 80 Shut-off PSI 19 13.2 10.5 11.3 6.9 7.8 12.9 4.9 13. All performance data is based on rated motor nameplate voltage.2 12.1 11.6 68 47 25 13.2 8.0 7.0 6.2 Shut-off 560 ft 80 14.3 8.2 12.8 60 80 Shut-off PSI 13.4 4. Performance shown does not include friction loss in the drop pipe.6 10.5 30 12.2 10.2 12.9 11.0 10.2 3.9 5.9 9.8 9.9 12.5 10.6 10.2 7.7 10.0 69 3.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 10 gpm Performance Charts Capacities in U.3 10. 2.1 8.1 9.7 8.4 5.9 13.1 60 80 Shut-off PSI 13.0 10.8 20 3.9 276 268 259 250 242 233 224 216 207 198 177 155 133 112 90 Shut-off PSI 0 6.3 6.3 4.7 12.4 11.1 4. Gallons per Minute PSI 20 40 60 Depth to Pumping Water Level.4 30 1 13.7 30 13.1 3.5 10.7 13.8 8.8 12.0 Shut-off 658 ft 3/4 Shut-off 295 ft 20 13.7 10.6 110 102 93 84 63 41 0 1.6 12.5 7.7 8.9 12.7 11.6 12.3 3.9 6.5 Shut-off 395 ft Shut-off PSI 12.6 234 225 217 208 199 191 182 173 165 156 134 113 91 0 2.6 3.2 9.9 12.8 3.8 119 93 84 110 102 76 67 58 50 41 0 13.1 10.2 12.2 5.7 50 13.3 60 13.6 10.9 13.2 Shut-off 880 ft HP 78 56 35 13 13 .7 162 154 145 136 128 119 8.0 40 13. in Feet Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 0 13.4 9.4 6.5 12.3 7.6 50 13.0 12.2 7.0 40 13.9 9.8 10.1 30 13.6 10.6 12.3 3.0 7.2 10.4 7.1 11.2 9.2 10.1 11.2 6.7 10.4 20 13.5 8.5 11.8 9.9 8.8 11.4 10.0 9.0 7.1 8.6 11. or Lift.7 11.1 6.1 7.0 10.8 50 13.0 6.0 3.2 6.2 5.4 10.8 12.3 60 7.3 12.6 10.2 11.5 12.3 4.5 6.0 80 13.0 8.8 11.1 12. 0 21 4.5 24 5.0 1.5 15 3.5 HP 350 100 300 80 1 HP 250 3/4 HP 200 10 FT 60 150 40 0.5 9 2.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 15 gpm Performance Curves 200 180 BEST EFFICIENCY RANGE FEET METERS PUMP OPERATING RANGE 3 HP 650 600 550 160 2 HP 500 140 120 450 400 1.0 14 3 0.0 GPM M3PH .0 3.5 GPM 100 20 50 0 0 0 0.5 18 4.0 12 2.5 6 1. 15 .SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 15 gpm Performance Charts Capacities in U.S. All performance data is based on rated motor nameplate voltage. or Lift. Performance shown does not include friction loss in the drop pipe. 2. in Feet Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 0 10 19 20 30 20 40 15 14 11 10 18 16 14 18 16 13 10 9 20 18 16 13 17 15 13 7 60 17 15 12 6 70 14 11 80 11 69 61 12 Shut-off 220 ft 3/4 17 17 20 20 50 19 90 100 110 120 130 140 150 160 Shut-off PSI 87 78 52 43 35 26 0 10 20 19 40 20 50 60 1 20 5 10 4 78 69 9 8 15 12 12 8 110 7 6 11 13 90 7 14 16 8 12 10 13 13 15 17 16 15 12 14 18 7 18 17 16 18 12 16 15 19 20 18 18 17 18 70 20 20 19 20 80 100 19 9 Shut-off 280 ft 30 18 120 130 140 150 160 Shut-off PSI 113 104 95 87 61 52 43 35 13 Notes: 1. Gallons per Minute HP PSI 20 40 60 80 Depth to Pumping Water Level. 16 87 66 6 Shut-off 501 ft 20 30 40 2 52 44 22 s . or Lift. 2. in Feet Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 0 19 15 10 17 13 10 20 30 20 40 50 60 19 70 1.5 80 20 19 20 19 15 19 17 13 20 18 17 15 10 20 18 17 15 13 5 18 16 15 13 11 6 19 18 16 15 13 11 17 16 14 13 10 5 9 4 99 91 90 20 19 17 16 14 12 100 19 17 15 14 12 9 8 110 17 15 14 12 120 15 13 11 7 130 13 11 7 140 10 6 150 5 9 Shut-off 369 ft HP 160 Shut-off PSI 151 143 134 125 117 108 82 73 30 8 0 20 18 16 13 10 19 17 15 11 7 20 18 17 14 19 18 16 11 8 50 20 60 70 20 80 90 100 110 20 20 17 14 16 12 8 20 20 19 17 14 19 19 18 16 12 9 20 19 19 18 17 15 20 19 18 18 17 16 13 10 20 19 18 18 17 16 15 20 19 18 17 17 16 15 13 120 20 20 19 18 17 17 16 14 13 10 130 19 19 18 17 16 15 14 12 10 6 140 19 18 17 16 15 14 12 9 150 18 17 16 15 14 12 9 160 15 13 10 7 208 200 191 182 174 165 156 139 130 Shut-off PSI 19 18 148 109 Notes: 1. Performance shown does not include friction loss in the drop pipe. All performance data is based on rated motor nameplate voltage.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 15 gpm Performance Charts Capacities in U. Gallons per Minute PSI 20 40 60 80 Depth to Pumping Water Level.S. 17 .SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 15 gpm Performance Charts Capacities in U.S. or Lift. 2. Performance shown does not include friction loss in the drop pipe. in Feet Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 0 10 19 20 30 19 40 50 19 60 70 3 19 80 14 12 10 18 16 14 18 15 13 10 17 14 15 13 18 17 14 11 18 16 13 6 100 19 17 14 11 7 130 140 150 160 Shut-off PSI 277 19 18 16 13 17 15 12 8 19 19 18 16 13 19 19 18 17 15 12 14 9 178 156 19 18 18 17 16 19 19 18 18 17 16 15 14 13 269 260 251 243 234 225 217 208 199 134 9 16 18 19 12 15 18 19 13 15 18 19 110 16 17 18 90 120 18 113 91 69 8 Shut-off 660 ft HP 48 26 5 Notes: 1. Gallons per Minute PSI 20 40 60 80 Depth to Pumping Water Level. All performance data is based on rated motor nameplate voltage. 0 20 4.0 25 5.5 HP 1 GPM 250 1 HP 60 200 3/4 HP 150 40 100 20 0 50 0 0 0.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 20 gpm Performance Curves 240 BEST EFFICIENCY RANGE FEET METERS PUMP OPERATING RANGE 800 5 HP 750 220 700 200 650 180 600 550 160 500 3 HP 140 450 120 400 2 HP 350 300 80 10 FT 100 1.0 10 2.0 30 6.0 GPM M3PH .0 15 3.0 18 5 1.0 7. All performance data is based on rated motor nameplate voltage. Gallons per Minute HP PSI 20 40 60 80 0 10 20 30 40 25 50 17 Depth to Pumping Water Level. 2. 19 . Performance shown does not include friction loss in the drop pipe. in Feet Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 27 22 27 21 14 12 26 20 25 19 10 18 7 49 40 15 Shut-off 153 ft 60 70 3/4 80 90 100 110 120 130 140 150 160 Shut-off PSI 58 32 23 14 6 27 23 19 26 23 18 13 11 0 10 20 30 40 22 18 21 17 9 16 40 31 25 20 24 20 16 24 19 15 19 13 50 27 60 70 80 12 Shut-off 212 ft 1 26 25 14 90 100 110 120 130 140 150 160 Shut-off PSI 83 75 66 57 49 23 14 5 Notes: 1. or Lift.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 20 gpm Performance Charts Capacities in U.S. 20 . 2. All performance data is based on rated motor nameplate voltage. Performance shown does not include friction loss in the drop pipe. Gallons per Minute HP PSI 20 40 60 80 Depth to Pumping Water Level.S. or Lift.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 20 gpm Performance Charts Capacities in U. in Feet Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 0 27 25 23 15 27 25 23 20 7 27 25 22 19 16 9 10 20 30 50 60 26 24 22 19 15 26 24 21 18 14 7 14 52 43 26 24 21 18 27 26 23 20 17 13 12 70 25 23 20 17 1 1/2 80 22 19 16 11 9 90 19 15 100 15 8 110 6 Shut-off 280 ft 40 120 130 140 150 160 104 95 87 78 69 61 35 13 27 22 16 26 25 19 10 0 10 20 27 26 24 22 16 27 26 24 22 20 11 27 26 24 22 19 17 12 30 40 50 60 27 70 2 80 27 25 24 21 19 16 25 23 21 19 16 12 11 26 25 23 20 18 15 26 25 22 20 18 15 10 8 90 24 22 20 17 14 100 22 19 17 14 7 13 113 104 110 19 17 120 16 12 130 11 Shut-off 340 ft Shut-off PSI 113 140 150 160 Shut-off PSI 139 130 121 95 87 78 69 61 39 17 Notes: 1. 21 .S.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps 20 gpm Performance Charts Capacities in U. All performance data is based on rated motor nameplate voltage. or Lift. Performance shown does not include friction loss in the drop pipe. 2. in Feet Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 0 10 20 50 27 60 70 3 27 80 27 5 10 26 22 18 20 15 27 26 23 18 11 26 25 21 16 12 27 26 25 23 19 26 24 23 21 16 27 26 24 22 21 19 13 25 24 22 20 19 17 7 26 25 24 22 20 18 16 14 8 110 27 26 25 23 22 20 18 16 13 26 25 23 21 20 18 16 13 7 130 24 23 21 19 18 15 12 140 23 21 19 17 15 11 150 21 19 17 14 10 160 13 8 175 167 158 132 123 184 15 25 120 Shut-off PSI 193 18 20 27 90 100 22 24 27 30 40 26 27 149 141 115 93 71 9 Shut-off 465 ft PSI 50 28 6 0 27 26 24 22 19 15 10 27 25 23 21 17 13 20 27 26 25 22 19 16 10 30 27 25 24 21 18 14 7 26 25 22 20 16 11 8 40 27 50 27 25 24 21 18 14 60 26 25 23 20 16 11 8 70 27 26 24 21 18 14 80 26 25 23 20 17 12 9 90 27 26 24 22 19 15 100 26 25 23 20 17 12 9 110 120 27 130 140 27 150 27 26 24 22 19 15 26 25 23 21 17 13 10 27 27 26 26 24 22 19 15 27 26 26 25 23 21 17 13 10 27 27 26 26 25 25 22 19 16 160 27 26 26 25 25 24 23 22 21 18 14 7 Shut-off PSI 326 317 309 300 291 283 274 265 257 248 226 205 183 161 140 118 96 75 10 Shut-off 772 ft HP 53 32 10 Notes: 1. Gallons per Minute 20 40 60 80 Depth to Pumping Water Level. 26 7 7 10 27 30 39 20 3/4 1 1.64 11.64 11. PMA WT.73 38.64 11.34 21.30 16.51 22.54 21.30 16.64 11.51 10.73 27.64 11.60 22.65 20.07 35.73 14.23 10.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps Dimensional Data Plastic with 2-Wire Motors GPM HP Stages A A A B C PE WT.73 14.51 10.01 17.66 10.74 32.51 10.01 17.10 23.51 22.00 23.5 8 10 14 16.12 18. PMA WT.76 7 7 10 28 31 40 20 3/4 1 1.65 20.60 23.65 19.73 13.49 24.94 28.07 36.00 8 10 11 26 29 33 7 1/2 3/4 1 1.5 9 12 15 21 14.73 37.51 10.64 11.33 6 7 8 27 30 40 C C Plastic with 3-Wire Motors B B Notes: All lengths are in inches All weights are in pounds Maximum diameter with cable guard is 3.73 13.76 30.73 13.64 11.94 28.73 13.17 6 7 8 12 24 28 32 39 15 3/4 1 1.90" 22 GPM HP Stages A B C PE WT.5 9 12 15 21 14.66 10.90 4 7 8 10 24 28 33 42 10 1/2 3/4 1 1.70 9.5 5 7 9 12.73 15.73 15.10 26.64 11. 5 1/2 3/4 1 13 18 21 17.43 26.49 24.5 7 9 12 17 12.81 27.76 30.23 10.79 15.64 11.67 6 7 8 12 24 28 31 38 15 3/4 1 1.05 32.34 21.73 15.00 8 10 10 25 30 34 7 1/2 3/4 1 1.43 26.64 11.5 8 10 14 16.57 9.29 30.05 32.74 30.60 26.5 7 9 12 17 12.10 23.15 34.30 16. 5 1/2 3/4 1 13 18 21 17.73 27.15 34.65 19.79 15.30 16.60 23.57 9.27 9.54 21.38 35.51 10.5 5 7 9 12.27 9.10 22.70 9.83 6 7 8 27 33 39 .73 15.38 34.12 18.29 30.30 4 7 8 10 24 28 33 42 10 1/2 3/4 1 1.00 23.81 27.51 10. 39 35.51 10.44 18.55 36.38 9.26 28.89 22.77 24.64 11.13 5 8 9 11 24 28 33 42 10 1/2 3/4 1 1.pump end only PMA .60 27.53 30.73 15.20 37.48 5 8 9 11 13 24 28 33 42 N/A 10 1/2 3/4 1 1. PMA WT.95 21.10 23.99 7 8 9 13 24 28 31 38 15 3/4 1 1.63 41.75 27.97 20.5 13 18 21 28 17.58 42.5 8 10 14 16.61 31.46 32.56 49.26 28.89 9.03 9.19 23.10 24.51 10.13 26.64 11.11 15.87 43.07 7 8 9 13 15 22 24 28 32 39 N/A N/A 15 3/4 1 1.73 13.03 9.73 15.60 15.5 2 3 7 9 12 17 19 26 13.73 15.SUBMERSIBLE PUMPS 4" Standard Capacity Pumps Dimensional Data Stainless Steel with 2-Wire Motors GPM HP Stages Stainless Steel with 3-Wire Motors A B C PE WT.62 16.33 17.66 21.29 31.98 10.55 10.24 66.49 37. 5 1/2 3/4 1 1.64 11.10 24.60 15.51 10.08 30.06 31.10 27.55 36.64 11.08 8 8 11 28 31 40 20 3/4 1 1.92 9.97 19.60 15.51 10.64 11.46 30.80 8 8 11 13 16 27 30 39 N/A N/A 20 3/4 1 1.04 27.61 31.03 26.10 27.52 9 11 12 14 25 30 34 44 7 1/2 3/4 1 1.98 27.97 20.66 25.33 17.05 39.63 49.73 13.64 11.44 18.05 14.75 27.15 34.64 11.62 16.5 13 18 21 28 17.5 2 3 8 10 13 18 24 16.13 26.10 22.60 15.10 19.02 47.73 13. PMA WT.91 24.5 2 9 12 15 21 24 14.02 9 11 12 14 26 29 33 43 7 1/2 3/4 1 1.08 30.46 32.29 31.04 29.64 11.97 19.39 37.65 7 8 9 27 30 40 GPM HP Stages A B C PE WT.70 34.51 10.5 9 12 15 21 14.51 10.95 21.76 10.05 37.62 16.66 21.66 25.32 24.57 7 8 9 10 12 19 27 33 39 N/A N/A N/A Notes: PE .04 22.73 15.38 10.92 9.70 35.32 24.55 19.73 13.06 32.5 7 9 12 17 13.10 19.91 24.64 11.73 13.73 15.pump and motor assembly 23 . 5 1/2 3/4 1 1.64 11.62 16.05 14.5 2 3 5 5 7 9 11 15 25 13.5 5 7 9 13.11 15.02 45.10 19. ■ Intermediate bearing for increased shaft stability. 24 . shell and shaft coupling. 50.SUBMERSIBLE PUMPS 4" High Capacity Pumps 30. ® ■ High flow impellers and stages are glass-filled Noryl for maximum efficiency. ■ 2" NPT discharge. See page 60. ■ Check valve must be ordered separately. ■ High capacity upthrust assembly for protection during start-up and operation (50 and 85 gpm models). ■ Powered by Franklin’s corrosion-resistant 4" submersible motors. ■ Stainless steel hex pump shaft. Noryl ® is a registered trademark of G. ■ Floating eye and hub seals for improved performance and efficiency.E. and 85 gpm Models Features: ■ Stainless steel discharge head and motor bracket. ■ Ceramic shaft sleeve and rubber discharge bearing eliminates sand wear. 5 8 30WA15S4-PE 92203015 17. 25 .00 35.17 11 13 17 25 50 1.00 25. 1 6 30WA1S4-PE 92203010 15.5 10 4 6 8 13 17 24 50WA15S4-PE 50WA2S4-PE 50WA3S4-PE 50WA5S4-PE 50WA7S4-PE 50WA10S4-PE 92205015 92205020 92205030 92205050 92205075 92205100 15.75 45.00 9 1. Order No.25 61.00 21.56 28.90". Maximum diameter with cable guard is 3.00 52.4" High Capacity Pumps 30-85 gpm Stainless Steel Units Ordering Information (See pgs. Model No.00 14 15 17 21 25 31 85 2 3 5 7. Discharge is 2" NPT.56 43.50 79. Dimensions Pump End Only Wt. All weights are in pounds.00 25.5 10 14 22 34 30WA2S4-PE 30WA3S4-PE 30WA5S4-PE 30WA7S4-PE 92203020 92203030 92203050 92203075 20.56 64.50 10 2 3 5 7. 2-3 for model number explanation) GPM HP Stages 1 .5 10 5 7 12 19 24 85WA2S4-PE 85WA3S4-PE 85WA5S4-PE 85WA7S4-PE 85WA10SA-PE 92208520 92208530 92208550 92208575 92208580 22.25 15 17 21 27 31 30 SUBMERSIBLE PUMPS Notes: All lengths are in inches.5 2 3 5 7.10 HP 4" Pump Ends Ordering Info.50 36. in Feet. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 60 80 44 39 32 26 18 40 33 26 19 34 27 20 28 21 22 11 13 48 39 31 22 13 5 Shut-off 171 ft 0 .5 hp 900 250 800 700 200 5 hp 600 150 500 3 hp 400 100 2 hp 300 50 50 FT 1.5 hp 200 1 hp 2.SUBMERSIBLE PUMPS 4" High Capacity Pumps 30 gpm Performance Curves FEET BEST EFFICIENCY RANGE 60 1200 55 1100 50 350 300 1000 EFFICIENCY % METERS PUMP OPERATING RANGE 45 7.5 GPM 100 0 0 5 0 1 HP PSI 1 0 10 20 30 40 50 60 70 80 20 Shut-off PSI 26 43 37 30 24 14 65 10 15 2 40 43 38 31 25 16 57 3 20 4 25 5 30 6 7 35 40 8 9 45 10 55 GPM 50 11 12 M3PH Depth to Pumping Water Level. or Lift. 5 0 10 20 30 40 50 60 70 80 Shut-off PSI 45 373 45 45 364 45 44 355 45 44 43 347 45 44 43 43 338 45 44 43 43 42 41 316 45 44 43 42 42 41 40 39 295 44 43 42 41 41 40 39 38 37 274 42 41 40 40 39 38 37 36 35 251 40 39 39 38 37 36 35 34 33 230 38 38 37 36 35 34 33 32 31 208 36 36 35 34 33 32 30 29 28 186 34 33 32 31 30 29 28 26 25 165 32 31 30 29 27 25 24 23 21 143 30 29 27 26 24 22 20 18 15 121 27 26 24 22 20 18 15 12 24 22 20 17 14 11 19 17 14 11 13 10 100 78 56 35 Shut-off 980 ft HP Notes: 1. 2. or Lift. 27 . Gallons per Minute Shut-off PSI 0 10 20 30 40 50 60 70 80 2 Shut-off PSI 0 10 20 30 40 50 60 70 80 3 Shut-off PSI 0 10 20 30 40 50 60 70 80 5 Shut-off PSI 44 42 39 35 31 27 116 44 43 40 38 163 45 268 60 80 45 42 38 34 29 24 18 43 39 34 30 25 19 40 35 30 26 20 10 36 31 26 21 12 31 27 22 14 27 23 15 23 16 18 81 72 63 55 46 37 29 20 11 45 42 39 35 31 28 24 107 45 43 39 36 32 28 24 20 99 45 43 40 36 32 29 25 21 14 90 43 40 37 33 29 25 21 15 41 37 33 30 26 22 16 38 34 30 26 22 17 34 31 27 23 18 10 31 27 24 19 11 28 24 20 12 19 11 81 73 64 55 47 38 16 45 44 42 39 37 34 31 28 128 45 44 42 40 37 34 31 28 25 120 44 42 40 37 34 32 29 26 23 111 42 40 38 35 32 29 26 23 19 102 41 38 35 32 29 27 24 20 15 94 38 36 33 30 27 24 21 15 32 29 27 24 20 14 28 23 19 13 18 12 85 63 42 20 45 44 43 42 40 39 37 207 45 44 43 42 40 39 37 36 198 45 44 43 42 41 39 38 36 34 190 43 42 40 39 37 36 34 32 31 168 40 39 37 35 34 32 31 29 27 146 37 35 34 32 30 29 27 25 23 125 45 42 38 33 29 24 17 44 43 41 38 35 154 45 44 259 45 43 41 39 36 33 145 45 44 43 250 45 43 41 39 36 33 30 137 45 44 43 42 242 45 44 43 42 41 233 45 44 44 42 41 40 224 45 45 44 43 41 40 38 216 Shut-off 226 ft 45 41 37 32 28 23 16 89 40 Shut-off 288 ft 20 Shut-off 396 ft 1. Performance shown does not include friction loss in the drop pipe. All performance data is based on rated motor nameplate voltage.SUBMERSIBLE PUMPS 4" High Capacity Pumps 30 gpm Performance Charts Capacities in U. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 33 32 30 28 27 25 22 19 15 103 30 28 26 24 22 19 15 26 24 21 18 14 21 18 13 12 81 60 38 16 Shut-off 638 ft PSI HP PSI 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 7.5 0 10 20 30 40 50 60 70 80 Depth to Pumping Water Level. in Feet.S. SUBMERSIBLE PUMPS 4" High Capacity Pumps PUMP OPERATING RANGE FEET BEST EFFICIENCY RANGE 60 240 10 hp 750 220 55 700 50 200 650 45 180 600 EFFICIENCY % METERS 50 gpm Performance Curves 7.5 hp 550 160 500 140 450 120 400 100 5 hp 350 300 60 40 3 hp 250 200 2 hp 150 1.5 hp 100 20 0 28 25 FT 80 5 GPM 50 0 0 10 0 2 20 4 30 6 40 8 50 10 12 60 14 70 16 80 18 GPM M3PH . in Feet. Performance shown does not include friction loss in the drop pipe.5 0 10 20 30 40 50 60 Depth to Pumping Water Level. 29 . or Lift. 2.SUBMERSIBLE PUMPS 4" High Capacity Pumps 50 gpm Performance Charts Capacities in U. Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 46 35 24 37 25 45 37 28 68 65 61 57 53 48 43 36 28 20 65 62 58 54 49 43 37 30 21 62 59 54 50 44 38 31 23 54 49 43 37 29 21 42 36 28 20 27 115 106 97 76 54 32 Shut-off 265 ft PSI Shut-off 425 ft HP Notes: 1. All performance data is based on rated motor nameplate voltage.S. Gallons per Minute Shut-off PSI 2 Shut-off PSI 3 Shut-off PSI 5 Shut-off PSI 0 10 20 30 40 50 60 0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 80 90 100 40 66 57 42 67 58 44 20 56 47 71 62 51 38 22 76 72 67 61 54 106 71 68 65 61 58 54 175 63 52 40 24 67 73 68 62 55 46 97 72 69 65 62 58 54 49 167 60 69 59 47 24 61 49 28 51 31 34 38 30 21 12 66 56 43 28 57 45 30 47 33 65 54 41 26 58 69 63 56 48 37 89 72 69 66 62 59 55 50 45 158 50 69 64 57 49 39 28 80 69 66 63 59 55 51 45 39 149 Shut-off 149 ft 20 35 18 21 41 32 24 15 70 65 58 50 40 29 66 59 51 42 31 60 52 43 32 20 53 44 34 22 71 63 54 71 68 64 61 57 53 48 42 35 27 123 70 67 63 60 56 51 46 40 33 141 70 67 64 60 56 52 47 41 34 26 132 Shut-off 195 ft 1. SUBMERSIBLE PUMPS SUBMERSIBLE PUMPS 4" High Capacity Pumps 50 gpm Performance Curves Capacities in U. Performance shown does not include friction loss in the drop pipe. in Feet. Shaded Areas Indicate Most Efficient Performance 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 0 10 20 30 40 71 50 60 7. 2. Gallons per Minute PSI Depth to Pumping Water Level.5 72 70 71 68 63 56 48 38 27 68 66 59 52 43 33 22 72 70 68 65 63 56 48 39 28 72 70 67 65 63 60 53 44 34 23 69 67 65 62 60 57 49 40 29 24 71 69 67 64 62 59 56 53 45 35 71 69 66 64 61 59 56 53 49 40 30 68 66 64 61 58 55 52 48 45 36 25 70 70 80 68 66 63 61 58 55 52 48 45 41 31 90 65 63 60 57 54 51 48 44 41 37 26 100 62 60 57 54 51 47 44 40 36 32 20 110 59 57 53 50 47 43 39 35 31 26 21 120 56 53 50 46 43 39 35 30 26 130 52 49 46 42 38 34 30 25 20 140 49 45 41 37 33 29 24 19 150 45 41 37 33 28 24 160 31 26 21 232 223 214 206 197 188 180 171 Shut-off PSI 162 154 132 Notes: 1. 30 110 Shut-off 555 ft HP 89 67 45 . or Lift.S. All performance data is based on rated motor nameplate voltage. or Lift. Gallons per Minute PSI Depth to Pumping Water Level. Shaded Areas Indicate Most Efficient Performance 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 0 10 71 20 30 40 50 60 80 65 61 57 51 45 39 31 67 63 59 54 49 42 35 27 23 72 71 69 66 61 57 52 46 39 31 72 71 69 68 64 59 55 49 43 36 28 24 72 70 69 67 66 62 57 52 46 40 32 72 70 69 67 66 64 60 55 50 43 36 28 72 70 68 67 65 64 62 58 53 47 40 33 24 71 70 68 67 65 64 62 60 55 50 44 37 29 20 71 70 68 66 65 63 62 60 58 53 47 41 33 25 21 70 10 69 90 71 69 68 66 65 63 61 60 58 56 51 44 37 29 100 69 68 66 64 63 61 59 57 56 53 48 41 34 26 22 110 67 66 64 62 61 59 57 55 53 51 45 38 30 120 65 64 62 61 59 57 55 53 51 48 42 34 26 130 64 62 60 58 57 55 52 51 48 45 39 31 22 140 62 60 58 56 54 52 50 48 45 42 35 27 150 60 58 56 54 52 50 47 45 42 39 31 23 160 53 51 48 46 43 41 38 35 31 28 326 317 308 300 291 282 274 265 256 248 226 204 Shut-off PSI 183 161 139 118 22 Shut-off 772 ft HP 96 74 53 Notes: 1.S. 2.SUBMERSIBLE PUMPS 4" High Capacity Pumps 50 gpm Performance Charts Capacities in U. Performance shown does not include friction loss in the drop pipe. All performance data is based on rated motor nameplate voltage. in Feet. 31 . SUBMERSIBLE PUMPS 4" High Capacity Pumps 180 PUMP OPERATING RANGE FEET METERS 85 gpm Performance Curves BEST EFFICIENCY RANGE 600 10 hp 550 160 500 120 450 60 7.5 hp 400 55 350 50 100 300 60 45 5 hp 250 200 3 hp 150 2 hp 40 25 FT 80 100 20 0 32 EFFICIENCY% 140 5 GPM 50 0 0 10 0 2 20 4 30 6 40 8 10 50 12 60 14 70 80 16 18 90 20 100 110 22 24 26 120 130 140 GPM 28 30 32 M3PH . 5 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Shut-off PSI HP PSI 10 0 10 20 30 40 50 60 70 80 Shut-off PSI 60 80 67 45 48 110 84 58 92 64 40 43 35 26 17 9 106 88 69 53 108 90 71 55 30 110 93 74 57 35 96 76 59 39 79 61 43 64 55 46 38 100 98 85 73 62 53 41 115 110 100 87 75 63 54 43 106 113 107 100 92 84 76 68 61 55 48 41 113 108 101 93 85 77 69 62 55 49 42 32 175 167 20 120 117 113 109 105 236 40 121 117 114 110 106 102 227 111 101 89 76 65 55 45 112 103 91 78 66 56 46 30 97 89 115 109 103 95 87 79 71 64 57 51 44 35 114 109 102 94 86 78 70 63 56 50 43 33 158 149 Shut-off 120 ft 40 113 88 61 35 64 46 49 Shut-off 167 ft Shut-off PSI 20 29 20 12 113 104 92 80 68 58 48 33 106 94 81 69 59 49 35 96 83 71 60 51 38 85 72 62 52 40 74 63 53 42 64 55 44 41 80 71 63 54 45 37 15 116 111 105 98 90 81 73 66 59 53 46 38 112 108 99 91 82 74 67 60 53 47 39 107 100 92 83 75 68 61 54 48 40 101 93 85 76 69 61 55 49 41 31 94 86 77 70 62 56 50 42 33 76 68 61 55 49 41 31 60 54 47 40 46 38 132 123 115 106 97 76 54 32 115 110 104 96 88 80 72 65 58 52 45 36 141 Shut-off 285 ft 2 0 10 20 30 40 50 60 Depth to Pumping Water Level.SUBMERSIBLE PUMPS 4" High Capacity Pumps 85 gpm Performance Charts Capacities in U. or Lift. All performance data is based on rated motor nameplate voltage. Performance shown does not include friction loss in the drop pipe. 2. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 Shut-off 425 ft PSI 60 80 100 120 140 160 180 200 240 280 320 360 400 440 480 500 550 600 121 118 114 110 106 102 98 219 122 118 115 111 107 103 99 94 210 122 119 115 111 107 103 99 95 91 201 119 116 112 108 104 100 96 91 87 193 116 112 108 104 100 96 92 87 82 184 113 109 105 101 97 92 88 83 78 175 109 106 101 97 93 88 84 79 74 167 106 102 98 94 89 84 79 74 69 158 99 95 90 86 81 76 70 65 59 141 Notes: 1. in Feet. 91 87 82 77 72 66 60 54 47 123 83 78 73 68 62 56 49 41 33 106 75 69 64 57 51 44 35 26 14 89 65 59 53 46 38 29 18 2 54 48 40 31 21 7 42 34 24 11 35 25 13 11 71 54 37 28 6 Shut-off 565 ft HP 33 .S. Gallons per Minute 3 0 10 20 30 40 50 60 Shut-off PSI 5 0 10 20 30 40 50 60 70 80 90 100 Shut-off PSI 7. ■ One year unconditional warranty against failure from sand locking in abrasive well conditions. ■ Ceramic shaft sleeve and rubber discharge bearing minimizes bearing wear and shaft misalignment without affecting pump efficiency. ■ Stainless steel wear ring and Urethane floating eye seal for improved performance and efficiency. Enabling 5-10 hp units to be mounted to either a 4" or 6" submersible motor. ■ Stainless steel shaft. ■ Fastener kit supplied for both 4" and 6" motors. ■ Glass-filled Noryl® impeller stage assemblies for incredible strength and durability. ■ 3" NPT heavy-duty stainless steel discharge head. 75. shell. Noryl ® is a registered trademark of G.SUBMERSIBLE PUMPS 6" High Capacity Pumps 50.E. 34 . intake screen and cable shield for corrosion resistance and longer life. 100 and 125 gpm Models Features: ■ Heavy-duty stainless steel discharge head and motor bracket. 5 10 15 20 25 3 5 6 9 13 16 125 5 7.19 46. All weights are in pounds. Pump and motor will be individually cartoned and require assembly. Order No.76 36. 94985003 94985004 94985005 94985008 94985011 94985015 13.26 29.94 30 31 32 36 40 46 75WA3S6-PE 75WA5S6-PE 75WA7S6-PE 75WA10S6-PE 75WA15S6-PE 75WA20S6-PE 75WA25S6-PE 94987503 94987505 94987507 94987509 94987513 94987517 94987523 13.5 2 3 5 7.13 23.01 23.5 10 15 20 25 3 5 7 9 13 17 23 4" 4" & 6" 4" & 6" 4" & 6" 6" 6" 6" 100 5 7.76 20.51 15.05 17.13 16. 35 .00 30 32 35 38 43 48 52 4" & 6" 4" & 6" 4" & 6" 6" 6" 6" 100WA5S6-PE 100WA7S6-PE 100WA10S6-PE 100WA15S6-PE 100WA20S6-PE 100WA25S6-PE 94980003 94980005 94980006 94980009 94980013 94980016 14.5".87 46.70 35.49 26.76 21.94 15.94 30 32 34 38 43 47 4" & 6" 4" & 6" 4" & 6" 6" 6" 6" 6" 6" 125WA5S6-PE 125WA7S6-PE 125WA10S6-PE 125WA15S6-PE 125WA20S6-PE 125WA25S6-PE 125WA30S6-PE 125WA40S6-PE 94982502 94982503 94982504 94982507 94982509 94982511 94982513 94982518 12.07 39.51 20.31 34. Maximum diameter with cable guard is 5.51 32.63 26.27 29 30 31 35 38 40 43 48 GPM HP Stages 50 1.5 10 3 4 5 8 11 15 4" 4" 4" 4" & 6" 4" & 6" 4" & 6" 50WA15S6-PE 50WA2S6-PE 50WA3S6-PE 50WA5S6-PE 50WA7S6-PE 50WA10S6-PE 75 3 5 7.SUBMERSIBLE PUMPS 6" High Capacity Pumps Ordering Information (See pgs. 2-3 for model number explanation) 6" Pump Ends Ordering Info.37 27.5 10 15 20 25 30 40 2 3 4 7 9 11 13 18 Notes: All lengths are in inches.54 31. Dimensions Pump End Only WT.62 18.51 16. Motor Fit Model No. Discharge is 3" NPT. 5 GPM 40 100 20 0 0 0 0 36 5 10 2 15 20 4 25 6 30 35 8 40 45 10 50 55 12 60 14 65 70 16 75 80 GPM 3 18 M PH .SUBMERSIBLE PUMPS 6" High Capacity Pumps PUMP OPERATING RANGE FEET BEST EFFICIENCY RANGE 65 260 240 60 10 hp 800 55 220 700 50 600 7.5 hp 45 EFFICIENCY % METERS 50 gpm Performance Curves 200 180 160 500 140 5 hp 120 400 100 300 50 FT 3 hp 80 2 hp 60 200 1.5 hp 2. 37 . in Feet. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 306 298 289 281 70 272 70 68 263 70 68 66 65 242 68 66 64 62 60 220 68 64 62 60 58 56 198 64 60 57 55 53 50 177 59 55 52 50 47 45 155 54 50 47 44 41 38 133 49 44 41 38 34 31 112 43 37 34 30 26 21 90 37 29 25 20 28 19 18 68 47 25 Shut-off 808 ft HP Discharge 3" NPT Notes: 1. or Lift. All performance data is based on rated motor nameplate voltage. Performance shown does not include friction loss in the drop pipe.SUBMERSIBLE PUMPS 6" High Capacity Pumps 50 gpm Performance Charts Capacities in U.S. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 49 42 38 34 28 83 42 33 27 21 32 19 18 61 39 18 Shut-off 591 ft PSI Depth to Pumping Water Level.5 0 20 30 40 50 Depth to Pumping Water Level. or Lift. 2. in Feet. Gallons per Minute 2 0 20 30 40 50 60 Shut-off PSI 3 0 20 30 40 50 Shut-off PSI 5 0 20 30 40 50 60 Shut-off PSI 7.5 68 63 105 70 173 61 38 21 51 25 41 30 58 46 35 51 43 34 25 17 8 63 46 37 23 57 38 25 49 27 31 16 62 53 44 34 17 65 69 54 45 35 20 41 67 60 52 42 32 74 57 48 39 31 22 13 5 66 53 46 38 28 62 61 47 39 30 55 40 31 15 49 33 18 42 21 68 63 57 97 65 59 51 44 79 70 60 52 45 37 71 17 69 64 58 50 88 53 45 36 27 6 66 63 59 54 50 121 70 63 59 55 50 45 112 67 60 56 51 46 41 103 64 56 51 47 42 37 95 55 46 41 36 29 20 73 45 35 28 18 34 16 69 66 62 58 138 69 66 62 58 54 129 51 30 70 68 65 187 70 68 66 63 178 68 66 64 61 169 68 63 60 58 54 148 63 57 54 51 47 126 57 50 47 43 39 104 70 67 164 68 65 155 68 65 61 147 247 HP PSI 10 0 20 30 40 50 60 239 230 221 213 69 204 70 67 195 Shut-off 158 ft 80 68 47 37 16 0 20 30 40 50 Shut-off PSI Shut-off PSI 67 59 51 41 83 60 Shut-off 211 ft Shut-off PSI 66 56 44 33 60 40 Shut-off 263 ft 20 Shut-off 418 ft 1. 5 hp 400 100 300 5 hp 200 3 hp 50 50 FT 150 5 GPM 100 0 38 0 0 10 0 2 20 4 30 6 40 8 50 10 12 60 14 70 80 16 18 90 20 100 22 110 24 26 120 GPM M3PH .SUBMERSIBLE PUMPS 6" High Capacity Pumps PUMP OPERATING RANGE FEET BEST EFFICIENCY RANGE 70 25 hp 1200 65 350 1100 300 60 1000 55 20 hp 900 250 EFFICIENCY % METERS 75 gpm Performance Curves 50 800 15 hp 700 200 600 10 hp 500 7. All performance data is based on rated motor nameplate voltage.S. or Lift.5 40 50 60 Shut-off PSI 113 205 114 109 196 64 26 44 35 27 18 9 1 105 99 91 81 73 86 116 100 92 82 74 67 77 106 93 84 75 68 56 69 102 85 76 69 58 24 60 96 77 70 61 31 88 71 63 37 51 108 103 99 93 87 124 116 104 99 94 88 81 116 109 100 95 88 82 76 107 108 104 101 97 92 153 112 105 101 98 93 88 144 112 106 102 97 142 114 109 106 187 113 109 254 113 109 107 245 114 110 107 105 237 0 20 30 40 50 60 PSI 114 107 103 98 92 133 115 110 106 103 179 116 111 107 104 100 170 111 107 104 100 96 161 450 500 550 Shut-off 162 ft 77 79 64 43 73 47 41 43 34 25 4 105 96 89 83 76 71 98 101 90 84 77 71 65 90 97 85 78 72 66 59 81 83 71 65 57 43 70 56 40 59 38 16 109 102 98 94 89 84 135 106 99 94 89 84 79 127 98 89 84 78 74 69 105 88 78 73 68 63 55 84 77 67 61 54 42 22 62 54 66 52 39 18 50 40 19 353 345 336 327 114 107 105 103 101 98 206 107 103 100 98 95 91 185 102 97 94 90 87 83 163 97 90 86 82 79 76 142 89 82 78 75 73 70 120 81 75 72 69 66 63 98 74 69 66 62 56 47 77 68 61 55 45 31 60 43 28 41 55 33 12 107 104 102 100 98 96 103 100 98 95 93 90 100 95 92 89 86 83 94 89 86 83 80 77 88 82 79 77 74 72 82 76 74 72 70 67 76 72 69 67 64 61 71 67 64 60 55 47 66 59 54 46 35 58 44 33 115 113 107 106 104 102 101 43 114 110 108 113 110 108 106 104 319 297 275 254 232 210 189 167 145 124 102 80 59 37 15 115 110 107 105 103 228 Shut-off 727 ft 112 263 Shut-off PSI HP 111 106 102 150 89 57 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 0 20 30 15 40 50 60 Shut-off PSI 20 110 103 97 88 103 112 104 98 89 80 95 80 101 73 53 Shut-off 936 ft PSI 98 83 70 40 53 111 105 159 0 20 30 10 40 50 60 Shut-off PSI HP 106 96 81 68 61 60 108 85 72 47 Shut-off 259 ft 0 20 30 5 40 50 60 Shut-off PSI 40 Shut-off 387 ft 20 0 20 30 3 40 50 Shut-off PSI Depth to Pumping Water Level. 2. Performance shown does not include friction loss in the drop pipe. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 Shut-off 493 ft PSI 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 0 20 30 25 40 50 60 Shut-off PSI 114 113 412 116 114 112 111 110 391 116 112 111 109 108 107 369 112 109 108 107 106 105 347 109 107 106 104 103 102 326 107 104 103 101 100 98 304 104 101 100 98 96 94 283 101 98 96 94 92 90 261 97 93 91 89 87 85 239 93 89 87 85 83 80 218 89 84 82 80 78 76 196 84 80 78 75 73 71 174 79 75 73 71 69 66 153 75 70 68 66 63 60 131 70 65 63 60 56 52 109 65 59 56 51 47 41 88 59 51 46 40 33 24 66 50 39 31 23 38 21 19 44 23 1 Shut-off 1202 ft HP Discharge 3" NPT Notes: 1. 39 . in Feet.SUBMERSIBLE PUMPS 6" High Capacity Pumps 75 gpm Performance Charts Capacities in U. Gallons per Minute 0 20 30 7. 5 hp 100 50 FT 300 5 hp 200 50 5 GPM 100 0 0 0 0 40 10 20 5 30 40 10 50 60 70 15 80 90 20 100 110 120 130 140 150 GPM 25 30 M3PH .SUBMERSIBLE PUMPS 6" High Capacity Pumps 100 gpm Performance Curves 70 25 hp 1000 65 900 60 20 hp 250 800 55 700 50 EFFICIENCY % 300 BEST EFFICIENCY RANGE FEET METERS PUMP OPERATING RANGE 200 15 hp 600 150 500 10 hp 400 7. 41 . All performance data is based on rated motor nameplate voltage.5 0 20 30 40 50 60 70 40 45 Shut-off 393 ft Shut-off PSI 20 62 40 19 123 118 113 108 102 95 147 123 112 107 101 94 86 78 126 111 99 93 85 76 66 55 104 98 83 74 64 53 39 82 62 51 37 61 32 82 61 39 17 Shut-off 590 ft 5 0 20 30 40 50 60 70 Depth to Pumping Water Level. in Feet.SUBMERSIBLE PUMPS 6" High Capacity Pumps 100 gpm Performance Charts Capacities in U. Gallons per Minute Shut-off PSI 10 0 20 30 40 50 50 70 Shut-off PSI 15 0 20 30 40 50 60 70 Shut-off PSI HP PSI 20 0 20 30 40 50 60 70 Shut-off PSI 25 Shut-off PSI 125 110 89 64 127 112 92 68 32 115 95 71 38 74 65 57 124 115 130 127 161 247 125 116 106 121 128 120 153 238 126 117 107 96 113 129 121 113 144 229 80 130 98 75 44 119 78 49 104 54 85 62 48 39 31 22 13 121 111 101 88 73 53 87 131 113 102 90 75 56 30 78 123 104 92 77 59 34 115 93 79 62 38 107 82 64 42 79 37 32 127 118 109 97 84 104 129 120 110 99 86 71 95 69 61 52 30 9 131 123 115 107 97 127 132 124 116 108 99 88 118 125 117 109 100 90 78 110 118 110 101 91 79 66 101 127 111 102 92 81 68 52 92 121 104 94 83 70 54 35 84 102 81 67 51 31 79 48 28 130 122 114 105 135 221 130 212 131 126 204 Shut-off 191 ft 60 132 127 122 195 132 128 123 118 186 128 124 119 113 178 129 124 119 114 109 169 Shut-off 320 ft 7. 2. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 132 280 132 128 125 258 0 20 30 40 50 60 70 359 338 131 128 124 121 117 236 131 128 316 127 124 120 117 113 109 215 127 120 116 112 109 105 101 193 119 112 108 104 100 96 91 172 111 104 99 95 90 85 80 150 103 94 89 84 79 72 65 128 94 83 78 71 64 56 47 107 82 70 63 55 45 35 69 53 44 33 52 31 85 63 42 130 128 125 123 294 130 128 125 122 119 117 273 130 124 122 119 116 113 110 251 124 118 116 112 109 106 102 229 118 112 109 105 102 98 94 208 111 105 101 97 94 90 85 186 104 97 93 89 85 80 75 164 96 88 84 79 75 69 64 143 87 79 74 68 63 57 50 121 Shut-off 846 ft PSI 78 68 62 56 49 41 33 99 67 55 48 40 31 53 39 30 37 Shut-off 1030 ft HP Discharge 3" NPT Notes: 1. or Lift.S. Performance shown does not include friction loss in the drop pipe. Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 140 106 62 22 13 4 135 112 79 116 85 51 43 Shut-off 130 ft 0 141 90 122 48 99 64 34 25 17 8 Shut-off 198 ft 0 0 . in Feet.5 hp 200 50 5 hp 5 GPM 100 10 0 PSI 5 0 20 30 40 7. or Lift.SUBMERSIBLE PUMPS 6" High Capacity Pumps PUMP OPERATING RANGE 65 40 hp 1200 60 350 300 1100 55 1000 50 30 hp 900 250 EFFICIENCY % BEST EFFICIENCY RANGE FEET METERS 125 gpm Performance Curves 800 25 hp 700 200 20 hp 600 500 150 15 hp 400 300 10 hp 50 FT 100 7.5 Shut-off PSI 42 30 5 HP Shut-off PSI 20 0 20 30 40 50 60 70 20 126 82 48 147 127 101 60 77 40 50 10 40 60 131 88 94 39 30 150 130 105 67 133 109 73 69 60 60 70 80 15 90 100 110 120 130 140 150 160 170 GPM 20 25 30 35 M3PH Depth to Pumping Water Level. Performance shown does not include friction loss in the drop pipe.S. or Lift. 43 . All performance data is based on rated motor nameplate voltage.SUBMERSIBLE PUMPS 6" High Capacity Pumps 125 gpm Performance Charts Capacities in U. 2. Gallons per Minute 185 252 168 243 234 226 292 283 HP PSI 30 0 20 30 40 50 60 70 71 147 159 53 148 141 150 149 142 133 142 217 208 200 129 88 47 114 54 45 45 36 27 6 145 137 128 117 106 116 135 126 116 104 89 72 94 143 134 125 133 150 191 144 136 126 116 124 145 182 146 140 174 Shut-off 263 ft 62 143 109 84 145 139 132 125 152 275 266 257 249 240 231 210 134 114 101 87 68 44 112 84 65 81 72 51 29 144 138 131 124 117 108 130 143 130 123 115 107 97 85 109 129 114 105 95 83 68 49 87 150 146 141 188 149 145 140 135 130 166 144 140 135 129 123 115 145 113 93 81 65 45 91 62 41 59 65 44 22 143 134 128 121 114 104 94 123 133 120 112 103 92 78 63 101 119 101 90 76 60 42 99 74 57 71 80 58 37 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 270 Shut-off PSI Shut-off PSI 176 137 120 100 69 125 106 79 0 20 30 40 50 60 70 Shut-off PSI 40 149 135 118 97 63 79 139 122 103 74 0 20 30 40 50 60 70 Shut-off PSI 25 148 132 115 93 88 0 20 30 40 50 60 70 Shut-off PSI 20 146 130 112 97 60 Shut-off 467 ft 15 144 128 105 40 Shut-off 601 ft Shut-off PSI 20 Shut-off 734 ft 10 0 20 30 40 50 60 70 Depth to Pumping Water Level. in Feet. Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 150 248 149 145 141 226 149 145 141 136 132 205 144 140 136 132 127 122 183 0 20 30 40 50 60 70 409 387 365 344 322 143 135 131 126 122 116 110 161 149 300 134 126 121 115 109 102 95 140 125 114 108 101 93 84 74 118 113 100 92 83 72 60 47 96 99 81 70 58 45 79 56 43 54 75 53 31 148 145 143 279 150 148 145 142 139 137 257 150 145 142 139 136 133 130 235 144 139 136 133 130 127 123 214 138 132 129 126 123 119 115 192 132 126 122 118 114 110 105 170 Shut-off 873 ft PSI 125 118 114 109 104 98 92 117 1108 103 97 91 84 76 107 96 90 83 75 66 55 95 82 73 64 53 42 80 62 52 40 Shut-off 1194 ft HP Discharge 3" NPT Notes: 1. Both materials are highly resistant to damage by minerals. No built in check valve on high capacity pumps. metals. ■ Hex rubber bearing has extra large surface assuring shaft stability and multiple flow channels keeping particles away from bearing surfaces. 44 .SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps High Head Filtered Effluent Pump Applications: ■ Filtered Effluent Service ■ Aeration ■ Ornamental Fountains and Waterfalls Features: ■ Ideal for effluent pumping applications. 300V. ■ Heavy duty. and other substances typically found in water. ■ Proven hydraulic staging allows close tolerances and increased performance. ■ Carbon phenolic up thrust washer prevents excessive wear in severe applications. 10' SJOOW motor leads. ■ Powered by Franklin Electric submersible motor. ■ Ceramic bearing sleeve has time proven durability for years of reliable service. ■ Removable built in check valve on 10-20 gpm pumps. ■ Stainless steel or thermoplastic discharge and motor bracket are tough and non-corrosive. 2 10WE05P4-2W115 94681005 25 230 2 10WE05P4-2W230 94681010 25 230 2 10WE07P4-2W230 94681015 29 1 230 2 10WE1P4-2W230 94681020 33 1. 10 1/2 3/4 1 1.2 HP Pump Ends GPM HP Volt Wire Model Order No.5 N/A N/A N/A N/A N/A N/A N/A N/A 10WE05P4-PE 10WE07P4-PE 10WE1P4-PE 10WE15P4-PE 94691005 94691010 94691015 94691020 7 8 9 10 20 1/2 3/4 1 1. WT. Order No. Model No. All weights are in pounds. 45 . Maximum diameter across cable guard is 3.90" on all models. 2-3 for model number explanation) 4" Thermoplastic Units GPM 10 20 HP Volt Wire 1/2 115 1/2 3/4 Ordering Info.5 230 2 10WE15P4-2W230 94681025 41 1/2 115 2 20WE05P4-2W115 94682005 24 1/2 230 2 20WE05P4-2W230 94682010 24 3/4 230 2 20WE07P4-2W230 94682015 28 1 230 2 20WE1P4-2W230 94682020 31 1.5 2 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 20WE05P4-PE 20WE07P4-PE 20WE1P4-PE 20WE15P4-PE 20WE2P4-PE 94692005 94692010 94692015 94692020 94692025 6 6 7 8 9 Notes: Discharge is 1-1/4" NPT.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps Thermoplastic Units Ordering Information (See pgs.5 230 2 20WE15P4-2W230 94682025 39 1/2 . WT. SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 200 PUMP OPERATING RANGE FEET METERS 10 gpm Performance Curves BEST EFFICIENCY RANGE 650 1.5 M3PH .5 10 2.5 hp 180 600 550 160 500 140 120 1 hp 450 400 350 3/4 hp 100 300 80 60 1/2 hp 250 200 150 25 FT 40 100 20 0 1 GPM 50 0 0 0.5 4 1.0 16 GPM 3.0 6 8 1.0 46 2 0.0 12 2.5 14 3. in Feet. Performance shown does not include friction loss in the drop pipe. All performance data is based on rated motor nameplate voltage.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 10 gpm Performance Charts Capacities in U.S.5 50 60 70 80 Shut-off PSI 40 60 14 12 11 9 6 3 13 11 9 7 4 12 9 7 4 11 8 5 10 5 6 13 12 11 10 8 6 14 13 12 10 9 6 3 8 14 13 12 11 10 8 5 96 87 79 70 61 53 44 35 27 18 14 13 13 12 11 10 129 14 13 12 11 10 9 8 111 14 13 12 11 10 9 8 6 103 14 12 11 10 9 8 6 4 94 13 11 10 9 8 7 5 12 11 10 8 7 5 12 10 9 7 5 3 11 9 7 6 3 8 5 3 5 14 13 13 12 11 10 9 120 85 77 68 59 38 16 14 13 13 12 11 11 156 14 13 12 12 11 10 9 139 14 13 13 12 11 10 9 8 130 14 13 12 11 10 9 8 8 122 13 12 11 10 9 9 8 7 113 13 11 10 10 9 8 7 6 105 11 9 9 8 7 6 4 9 8 7 5 4 7 5 3 5 14 14 13 12 12 11 10 148 83 61 40 18 14 13 13 12 12 11 11 199 14 13 13 13 12 12 11 10 190 14 13 13 12 12 11 10 10 181 13 12 12 11 10 10 9 9 160 12 11 10 10 9 8 8 7 138 11 10 9 8 8 7 6 5 117 9 8 8 7 6 5 4 3 95 14 13 13 12 11 137 14 14 13 13 182 14 14 259 14 13 13 12 174 14 14 13 251 14 13 13 12 11 165 14 14 13 13 242 14 14 14 13 13 233 14 14 14 13 13 12 225 14 14 14 13 13 12 12 216 14 14 13 13 12 12 11 207 Shut-off 242 ft 20 Shut-off 337 ft 0 20 30 40 1/2 50 60 70 80 Shut-off PSI Depth to Pumping Water Level. 47 . Gallons per Minute 0 20 30 40 3/4 50 60 70 80 Shut-off PSI 0 20 30 40 1 50 60 70 80 Shut-off PSI 0 20 30 40 1. Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 Shut-off 441 ft PSI 8 7 6 5 4 3 7 5 4 5 73 52 30 Shut-off 619 ft HP 8 Notes: 1. 2. or Lift. 5 hp 350 100 300 1 hp 80 250 60 3/4 hp 200 1/2 hp 150 40 10 FT 100 20 1 GPM 50 0 0 0 0.0 25 5.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 140 120 PUMP OPERATING RANGE FEET METERS 20 gpm Performance Curves BEST EFFICIENCY RANGE 2 hp 450 400 1.0 30 6.0 10 2.0 48 5 1.0 7.0 20 4.0 GPM M3PH .0 15 3. Performance shown does not include friction loss in the drop pipe. All performance data is based on rated motor nameplate voltage. Gallons per Minute 3/4 Shut-off PSI 1 Shut-off PSI 1. 2.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 20 gpm Performance Charts Capacities in U.S. Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 Shut-off 368 ft PSI Shut-off 452 ft HP Discharge 3" NPT Notes: 1. or Lift. 49 .5 Shut-off PSI 2 Shut-off PSI 0 20 30 40 50 60 70 80 0 20 30 40 50 60 70 80 0 20 30 40 50 60 80 0 20 30 40 50 60 70 80 57 26 23 20 15 6 74 27 25 23 20 18 100 27 24 151 27 26 187 60 24 21 13 21 15 48 40 26 24 20 16 8 24 21 17 9 65 57 27 25 23 21 18 15 91 27 26 22 142 27 27 25 178 27 26 23 21 18 15 9 83 27 26 25 21 133 27 26 24 170 26 16 22 18 9 31 22 14 5 27 21 18 11 25 18 12 22 13 19 48 39 Shut-off 152 ft 24 20 12 40 15 7 Shut-off 191 ft Shut-off PSI 20 31 22 13 5 26 22 19 17 12 25 20 17 13 23 18 14 20 15 7 18 8 6 26 24 21 19 16 10 24 22 19 16 11 74 65 57 48 40 31 22 1 27 25 23 21 17 116 27 25 23 21 19 15 107 25 24 22 20 18 13 99 27 24 22 20 18 16 9 90 26 22 20 18 16 14 24 21 18 16 14 10 21 17 15 12 6 19 15 12 7 16 9 81 73 55 47 29 27 25 24 23 21 19 18 16 118 27 24 23 21 20 18 16 14 109 24 21 19 18 16 14 10 6 88 21 18 16 13 10 5 17 13 9 12 66 44 23 26 25 23 19 125 27 26 24 23 161 27 26 25 23 22 153 27 26 25 23 22 20 144 27 26 25 24 22 21 19 135 26 25 24 22 21 19 18 127 Shut-off 251 ft 1/2 0 20 30 40 50 60 70 80 Depth to Pumping Water Level. in Feet. Maximum diameter across cable guard is 3.90" on all models.5 HP Single-Phase Units GPM 35 45 60 90 HP Volt Wire Ordering Info. 50 WT. 94683505 94683510 94683515 94683520 94683525 25 94684505 94684510 94684515 94684520 94684525 28 29 44 1/2 115 2 35WE05S4-2W115 1/2 230 2 35WE05S4-2W230 3/4 230 2 35WE07S4-2W230 1 230 2 35WE1S4-2W230 1.5 230 2 35WE15S4-2W230 1/2 115 2 45WE05S4-2W115 1/2 230 2 45WE05S4-2W230 3/4 230 2 45WE07S4-2W230 1 230 2 45WE1S4-2W230 1. Model No.1.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps Stainless Steel Units Ordering Information (See pgs. 25 29 33 39 28 33 36 44 29 33 37 45 . 2-3 for model number explanation) 1/2 . Notes: All weights are in pounds. Order No.5 230 2 45WE15S4-2W230 1 230 2 60WE1S4-2W230 1.5 230 2 60WE15S4-2W230 94686005 94686010 94686015 94686020 94686025 1.5 230 2 90WE15S4-2W230 94689025 1/2 115 2 60WE05S4-2W115 1/2 230 2 60WE05S4-2W230 3/4 230 2 60WE07S4-2W230 Discharge tapping 2" FNPT with no built in check valve. SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps Pump Ends Ordering Information (See pgs. 94693505 94693510 94693515 94693520 94693525 94693530 1/2 35WE05S4-PE 3/4 35WE07S4-PE 1 35WE1S4-PE 1. 2-3 for model number explanation) 1/2 . Model No. 51 .3 HP Pump Ends GPM 35 45 60 90 HP Ordering Info. Notes: All weights are in pounds. Maximum diameter across cable guard is 3.5 45WE15S4-PE 2 45WE2S4-PE 3 45WE3S4-PE 1/2 60WE05S4-PE 3/4 60WE07S4-PE 1 60WE1S4-PE 1. Order No. 7 8 9 10 11 12 94694505 94694510 94694515 94694520 94694525 94694530 10 94696005 94696010 94696015 94696020 94696025 94696030 11 94699020 94699025 94699030 15 11 12 15 16 19 12 13 14 15 17 15 17 Discharge tapping 2" FNPT with no built in check valve.5 35WE15S4-PE 2 35WE2S4-PE 3 35WE3S4-PE 1/2 45WE05S4-PE 3/4 45WE07S4-PE 1 45WE1S4-PE 1.5 60WE15S4-PE 2 60WE2S4-PE 3 60WE3S4-PE 1.90" on all models.5 90WE15S4-PE 2 90WE2S4-PE 3 90WE3S4-PE WT. SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 120 PUMP OPERATING RANGE FEET METERS 35 gpm Performance Curves BEST EFFICIENCY RANGE 3 hp 400 350 100 300 2 hp 80 250 1.5 GPM 20 50 0 0 0 0 52 5 1 10 2 15 3 20 4 25 5 6 30 35 40 7 8 9 45 10 55 GPM 50 11 12 M3PH .5 hp 60 200 1 hp 150 40 100 25 FT 3/4 hp 1/2 hp 2. Performance shown does not include friction loss in the drop pipe. or Lift. All performance data is based on rated motor nameplate voltage. Shaded Areas Indicate Most Efficient Performance 80 100 120 140 160 180 200 250 300 350 400 450 500 550 Shut-off 288 ft PSI Shut-off 396 ft HP Notes: 1.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 35 gpm Performance Charts Capacities in U. Gallons per Minute Shut-off PSI 1 Shut-off PSI 1.5 Shut-off PSI 2 Shut-off PSI 3 Shut-off PSI 0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 29 42 33 24 40 43 37 30 24 14 65 45 41 37 32 28 23 16 89 44 42 38 35 31 27 116 44 43 40 38 163 60 21 12 3 42 35 25 36 27 11 28 14 32 30 11 15 Shut-off 88 ft 40 29 17 Shut-off 113 ft 3/4 0 10 20 30 40 50 38 27 40 23 14 6 44 39 32 26 17 40 33 26 19 34 27 20 28 21 22 11 13 57 48 39 31 22 13 5 45 42 38 33 28 24 17 42 38 34 29 24 18 43 39 34 30 25 19 40 35 30 26 20 10 36 31 26 21 12 31 27 22 13 27 23 15 23 16 81 72 63 55 46 37 29 20 11 45 42 39 36 32 28 24 20 99 45 43 40 36 32 29 25 21 14 90 43 40 37 33 29 25 21 15 41 37 33 30 26 22 16 38 34 30 26 22 17 34 31 27 23 18 10 31 27 24 19 11 28 24 20 12 19 11 81 73 64 55 47 38 16 45 44 42 39 36 34 31 28 128 45 44 42 39 37 34 31 28 26 119 44 42 40 37 34 32 29 26 23 111 42 40 38 35 32 29 26 23 19 102 40 38 35 32 30 27 24 20 15 94 38 36 33 30 27 24 21 15 32 29 27 24 20 14 26 23 19 13 18 12 85 63 42 20 43 38 31 25 16 45 42 39 35 31 28 24 107 45 43 41 38 35 154 45 43 41 38 36 33 145 45 43 41 39 36 33 30 137 Shut-off 171 ft Shut-off PSI 20 18 Shut-off 226 ft 1/2 0 10 20 30 40 50 Depth to Pumping Water Level. 2. 53 . in Feet.S. SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps PUMP OPERATING RANGE FEET METERS 45 gpm Performance Curves BEST EFFICIENCY RANGE 120 110 350 3 hp 100 90 300 80 2 hp 250 70 60 200 1.5 hp 1 hp 50 150 40 30 25 FT 3/4 hp 100 5 GPM 1/2 hp 20 50 10 0 0 0 0 54 10 2 20 4 30 6 40 8 50 10 60 12 14 GPM M3PH . 2. Performance shown does not include friction loss in the drop pipe.5 Shut-off PSI 2 Shut-off PSI 3 Shut-off PSI 0 10 20 30 40 50 0 10 20 30 40 50 60 0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 80 90 100 18 51 40 28 44 49 41 31 17 60 55 49 41 32 22 74 53 48 42 36 99 54 50 46 42 37 32 27 137 60 80 52 42 30 43 32 16 33 18 36 27 18 10 52 43 34 21 45 35 23 37 25 27 51 43 34 25 17 55 50 42 33 23 51 43 34 24 52 44 35 26 46 37 27 16 38 28 18 30 19 65 56 48 39 30 22 13 55 49 44 38 31 23 82 55 50 44 38 32 24 16 73 51 45 39 33 26 17 46 40 34 27 18 41 35 28 19 36 29 21 30 22 65 56 48 39 30 22 56 52 48 44 40 35 30 24 17 53 49 45 40 35 30 25 18 49 45 41 36 31 25 19 46 41 37 32 26 20 42 37 32 27 21 38 33 28 22 15 27 21 103 94 85 77 68 59 38 Shut-off 61 ft 40 9 51 42 32 20 54 49 43 37 30 91 54 51 47 42 38 33 27 21 129 55 51 47 43 38 33 28 22 16 120 55 52 48 44 39 34 29 23 16 111 21 Shut-off 122 ft 3/4 0 10 20 30 40 50 36 40 Shut-off 158 ft Shut-off PSI 20 21 Shut-off 190 ft 1/2 0 10 20 30 40 50 Depth to Pumping Water Level. or Lift. 55 .SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 45 gpm Performance Charts Capacities in U. Gallons per Minute Shut-off PSI 1 Shut-off PSI 1. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 23 Shut-off 250 ft PSI Shut-off 337 ft HP Notes: 1. All performance data is based on rated motor nameplate voltage. in Feet.S. 5 hp 150 40 30 125 1 hp 100 3/4 hp 75 20 12.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps PUMP OPERATING RANGE FEET METERS 60 gpm Performance Curves BEST EFFICIENCY RANGE 90 275 3 hp 80 250 70 60 225 200 2 hp 175 50 1.5 FT 1/2 hp 50 5 GPM 10 25 0 56 0 0 10 0 2 20 4 30 6 40 8 50 10 60 12 14 70 16 80 18 GPM M3PH . 5 Shut-off PSI 2 Shut-off PSI 3 Shut-off PSI 0 10 20 30 40 50 0 10 20 30 40 50 0 10 20 30 40 50 60 0 10 20 30 40 50 60 17 8 62 40 31 68 54 31 41 60 80 Shut-off 59 ft 44 64 43 47 22 14 70 56 35 58 39 42 32 23 15 69 59 47 24 61 49 27 51 31 34 30 21 13 66 56 43 28 57 45 30 47 32 34 21 41 32 24 15 70 64 58 50 41 29 65 59 51 42 31 60 52 43 33 20 53 45 34 22 46 36 24 37 25 72 63 54 46 37 28 Shut-off 92 ft 3/4 0 10 20 30 40 50 40 68 39 66 57 42 67 58 44 20 56 47 39 72 64 53 39 24 65 54 41 26 67 58 50 69 63 56 48 38 89 70 64 57 49 39 28 80 71 62 51 37 22 76 67 61 54 106 68 62 55 46 98 Shut-off 114 ft Shut-off PSI 20 Shut-off 149 ft 1/2 0 10 20 30 40 50 Depth to Pumping Water Level. Performance shown does not include friction loss in the drop pipe. or Lift. Gallons per Minute Shut-off PSI 1 Shut-off PSI 1. 57 . Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 Shut-off 195 ft PSI Shut-off 265 ft HP Notes: 1. in Feet.S.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 60 gpm Performance Charts Capacities in U. 2. All performance data is based on rated motor nameplate voltage. SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps PUMP OPERATING RANGE FEET METERS 90 gpm Performance Curves BEST EFFICIENCY RANGE 60 180 3 hp 50 160 140 40 2 hp 120 30 100 1.5 hp 80 20 10 FT 60 40 10 10 GPM 20 0 0 0 0 58 20 2 4 40 6 8 10 60 12 14 80 16 18 100 20 22 GPM 120 24 26 28 30 M3PH . Gallons per Minute Shut-off PSI 2 0 10 20 30 40 50 Shut-off PSI 3 Shut-off PSI 0 10 20 30 40 50 20 40 60 80 69 38 43 94 61 99 65 32 32 24 15 6 112 88 61 34 91 65 39 68 43 47 109 84 58 44 35 26 18 9 96 77 59 38 79 61 42 64 45 106 88 69 52 64 110 93 74 57 34 48 108 91 72 54 30 55 46 38 29 20 12 Shut-off 95 ft 1. 2. 59 . or Lift. Shaded Areas Indicate Most Efficient Performance 100 120 140 160 180 200 250 300 350 400 450 500 550 Shut-off 121 ft PSI Shut-off 167 ft HP Notes: 1. All performance data is based on rated motor nameplate voltage. in Feet.SUBMERSIBLE PUMPS 4" E-Series Environmental Pumps 90 gpm Performance Charts Capacities in U.5 0 10 20 30 40 50 Depth to Pumping Water Level. Performance shown does not include friction loss in the drop pipe.S. SUBMERSIBLE PUMPS Submersible Pump Accessories Ordering Information Check Valves Reducer Bushing Poppet P t T-Handle Poppet Wrench Check Valves - Silicone Bronze Description Flomatic™ 4221LEB Inlet Outlet Case Qty. Order No. Wt. 1-1/4" MNPT 1" FNPT 36 91980631 1.25 Flomatic™ 4242LEB 1-1/4" MNPT 1-1/4" FNPT 36 91980649 1.75 Check Valves - Stainless Steel Description Flomatic™ 4221LSS2 Inlet Outlet Case Qty. Order No. Wt. 1-1/4" MNPT 1" FNPT 49 91985317 1.4 Flomatic™ 4242SS2 1-1/4" MNPT 1-1/4" FNPT 49 91985309 1.5 Description Inlet Outlet Carton Qty. Order No. Wt. Simmons #658SB 2" MNPT 2" FNPT 1 91982157 3.5 Simmons #660SB 3" MNPT 3" FNPT 1 91981266 10 Simmons #661SB 4" MNPT 4" FNPT 1 91980334 21 Description Order No. Wt. Flomatic™ Poppet with Removable Ring (Patent Pending) 91985259R 0.1 T-Handle Poppet Wrench 23498207 1 Check Valves - Ductile Iron Flomatic™ Poppet with Removable Ring (Patent Pending) Reducer Bushing Description Inlet Outlet PSI Rating Order No. Wt. White PVC Bushing 1-1/4" MNPT 1" FNPT 200 PSI 31031008R 0.2 Notes: Flomatic™ is a trademark of the Danfoss Corporation. All weights are in pounds. 60 NON-SUBMERSIBLE PUMPS WJS Series Shallow Well Jet Pumps Features: ■ Cast iron casing and seal plate ensures durability and long life. ■ Precision engineered thermoplastic impeller, diffuser, nozzle and venturi. NRTL/C CSA108 UL778 ■ A.O. Smith higher than standard Nema service factor dual compartment motors. 1¼" NPT Suction Priming Plug ½" NPT ■ Dual voltage (115/230) stainless steel motor shaft, dual ball bearing. I ■ Dual adjustment pressure switch preset at 30-50 psi for today’s modern living conditions. Gauge Tapping ¼" NPT ■ Mechanical seal ensures years of leak free operation. ■ Fully serviceable with two year over the counter warranty. G ■ Clean out plug to easily unclog nozzle. H ■ Pressure gauge included on all models. Nozzle Cleanout ¼" NPT F E Air Volume Control Tapping ¼" NPT D 1" NPT Discharge Drain Plug ¼" NPT A C B Dimensional Data Series HP A B C D E F G H I WJS05CI 1/2 9-3/8 17-5/16 3 6 9 4-55/64 8-29/32 4 3.5 WJS07CI 3/4 9-3/8 17-5/16 3 6 9 4-55/64 8-29/32 4 3.5 WJS1CI 1 9-3/8 17-5/16 3 6 9 4-55/64 8-29/32 4 3.5 WJS05CI-H 1/2 9-3/8 17-5/16 3 6 9 4-55/64 8-29/32 4 3.5 Notes: All lengths are in inches. All weights are in pounds. H = High Head 61 NON-SUBMERSIBLE PUMPS WJS Series Ordering Information (See pgs. 2-3 for model number explanation) Model HP Discharge/Suction Voltage WJS05CI WJS07CI WJS1CI WJS05CI-H 1/2 3/4 1 1/2 1” x 1-1/4” 1” x 1-1/4” 1” x 1-1/4” 1” x 1-1/4” 115/230 115/230 115/230 115/230 Pump Unit Order No. 91360005 91360007 91360010 91361005 Wt. 36 37 38 36 Performance Charts HPZ 1/2 3/4 1 1/2 High Pressure Total Suction Lift Ft. Discharge Pressure - PSI 35 40 20 25 30 5 12.8 12.5 12.3 12.1 11.2 9.5 6.9 4.3 2.0 - - - - 64.2 10 11.5 11.3 11.0 10.8 10.4 8.5 6.0 3.4 1.0 - - - - 62.0 60 65 70 75 80 15 9.8 9.7 9.6 9.5 9.4 7.3 4.7 2.2 - - - - - 59.9 20 8.3 8.1 7.8 7.7 7.6 5.7 3.5 1.0 - - - - - 57.7 25 5.6 5.55 5.5 5.4 5.3 4.1 2.3 0.2 - - - - - 55.5 5 16.2 16.0 15.8 15.6 15.4 12.1 8.7 5.7 2.9 - - - - 65.0 10 14.3 14.0 13.7 13.5 13.2 10.6 7.6 4.6 1.6 - - - - 62.8 15 12.1 11.7 11.3 11.0 10.6 9.3 6.3 3.2 0.2 - - - - 60.6 20 9.9 9.6 9.3 9.0 8.7 7.8 4.8 1.9 - - - - - 58.5 25 7.2 7.1 7.0 6.9 6.8 6.7 3.5 0.6 - - - - - 56.3 5 24.8 24.7 23.2 19.8 16.5 13.1 9.5 6.3 3.4 0.5 - - - 66.2 10 21.5 21.2 20.1 18.4 15.2 11.5 7.9 4.9 2.4 - - - - 64.2 15 18.1 17.8 17.4 16.7 13.8 10.3 6.9 4.0 1.3 - - - - 62.1 20 14.4 14.3 14.2 14.6 12.3 9.0 5.3 2.3 0.2 - - - - 60.1 25 10.5 10.5 10.4 10.3 8.8 7.0 4.2 1.3 - - - - - 57.2 5 8.8 8.9 8.6 8.4 8.3 8.1 7.4 6.0 4.7 3.4 2.2 1.2 0.15 80.6 10 7.8 7.7 7.55 7.4 7.25 7.2 6.6 5.4 4.15 2.8 1.8 0.7 - 78.5 15 6.5 6.4 6.3 6.2 6.1 6.0 5.3 4.8 3.6 2.3 1.3 0.3 - 76.3 20 5.3 5.2 5.1 4.9 4.8 4.7 4.6 4.1 2.9 1.7 0.7 - - 74.1 25 3.7 3.65 3.6 3.55 3.5 3.5 3.45 2.4 2.3 1.3 0.3 - - 71.9 Notes: All lengths are in inches. All weights are in pounds. 62 45 50 55 Gallons per minute Shut-off Pressure PSI NON-SUBMERSIBLE PUMPS WJS Series METERS FEET Performance Curves 60 200 180 50 160 140 40 120 30 100 80 1/2 hp High Head 20 60 3/4 hp 1 hp 1/2 hp 40 10 20 0 0 0 0 10 2 20 4 GPM 30 6 8 M3PH 63 . 3 WJC1CI 1 5.1 - - 91370002 7 Wt.NON-SUBMERSIBLE PUMPS WJC Series Convertible Jet Pumps Features: ■ Cast iron casing and seal plate ensures durability and long life. Model HP Discharge/ Suction Voltage WJC05CI-C WJC07CI-C WJC1CI-C WJC05 INJ KIT WJC07/1 INJ KIT 1/2 1” x 1-1/4” 115/230 91370005 36 3/4 1” x 1-1/4” 115/230 91370007 37 1 1” x 1-1/4” 115/230 91370010 38 1/2 - - 91370001 7 3/4 . Smith higher than standard Nema service factor dual compartment motors.38 20. ■ Clean out plug to easily unclog nozzle. diffuser. 2-3 for model number explanation) 64 Pump Unit Order No. nozzle and venturi. ■ Dual voltage (115/230) stainless steel motor shaft.0 4.58 9.78 9.38 19. . US LR 80980 ■ Dual adjustment pressure switch preset at 30-50 psi for today’s modern living conditions.O.0 4. ■ Pressure gauge included on all models.58 9. dual ball bearing.0 10. ■ Precision engineered thermoplastic impeller. Ordering Information (See pgs.0 10. G E A E B Dimensional Data Series HP A B C D E WJC05CI 1/2 5.38 18.0 10.0 4. ■ Mechanical seal ensures years of leak free operation. CSA ENC 3 COF CSA 3 C ■ A.3 WJC07CI 3/4 5.3 Notes: Dimensions will vary according to motor manufacturer. 5 3.7 7.0 90 - 4.0 3.4 5.0 1.1 8.6 4.5 1/2 Deep Shallow 3/4 Deep Shallow 1 Deep 25 30 35 40 45 55 60 Shut-off Pressure PSI 7.7 13.1 11.1 6.1 4.2 1.5 6.8 4.8 7.1 13.0 9.1 3.7 3.5 12.5 50 Gallons per minute 20 - 10.7 7.4 20 - 11.7 7.7 4.2 5.6 1.3 2.6 11.4 8.2 Shallow 15 8.8 8.6 5.6 6.8 2.2 12.9 10.9 1.5 - 60.9 4.4 3.7 5.5 8.0 50 - 7.4 5.0 66.1 71.5 14.0 7.9 4.6 87.5 3.8 6.9 85.2 62.0 50 - 6.5 16.4 6.4 2.0 4.8 10.7 Notes: All lengths are in inches.4 3.3 6.NON-SUBMERSIBLE PUMPS WJC Series Performance Charts Discharge Pressure .1 71.6 8.8 4.2 2.7 4.7 9.3 5.7 16.7 4.7 4.7 9.8 4.0 3.0 5 20.8 7.8 0.0 50 - 8.6 14.8 5. 65 . All weights are in pounds.4 - 59.9 7.0 15 12.0 9.0 3.3 14.2 7.5 1.6 2.0 5.8 5.1 8.8 2.1 19.5 2.0 10.4 7.5 9.8 3.2 3.3 3.7 8.9 11.8 13.5 5.0 80 - 4.6 1.3 66.0 90 - 4.7 25 7.4 2.8 10.9 17.7 1.0 62.2 6.0 5 18.0 0.0 3.7 7.5 1.1 8.5 5.2 17.4 1.6 71.1 3.3 25 4.1 20 - 12.3 12.7 25 9. 20 5 11.4 2.8 4.3 72.3 73.9 7.9 74.8 1.0 0.1 5.9 1.4 7.0 15 14.0 86.7 6.4 4.9 6.2 1.4 3.6 1.2 20.3 3.1 1.4 12.5 7.9 8.9 67.2 4.9 19.PSI HP Configuration Total Suction Lift Ft.7 12.7 - - 56.5 76. 1-1/4” F x 1-1/4” M 91980680 4 Horizontal Check Valve Description Global Series Furnas Pro Series 4-in-1 Foot Valve Pressure Switches PSI Setting Order No. Wt. 9193-4018 1 External Control Valve 9198-2538 2 Notes: All weights are in pounds.NON-SUBMERSIBLE PUMPS Jet Pump Accessories Ordering Information (See pgs.1-1/2” 21339 1 Cast Iron Horizontal Check Valve. Wt.m. 0 . 1/4” b. 3/4” .100 psi. 4-in-1 Foot Valve. Furnas Pressure Switch 66 Global Pressure Switch Pressure Gauge . 20/40 PRSW2040 1 30/50 PRSW3050 1 40/60 PRSW4060 1 20/40 69ES1AZ2040 1 30/50 69ES1AZ3050 1 40/60 69ES1AZ4060 1 Pressure Gauge. 2-3 for model number explanation) Accessory Description Order No. Poppet Type Bronze. eliminating short cycling. eliminating the annoying pressure fluctuations common with pump/tank systems. 67 . Provides constant pressure at each specific flow rate delivered by the pump. Consult your dealer for assistance with your particular application. Wt. AQ80 None 1” 1” 1” 80 psi 91987321 2 Notes: All weights are in pounds. AquaGenies may be connected in parallel to handle each 20 gpm increment.) Ordering Information (See pgs. the major cause of motor wear and failure. 2-3 for model number explanation) Model Preset Outlet Pressure Inlet Outlet Tank Connection Max. Maximum operating pressure: 80 psi. Inlet Pressure Order No.NON-SUBMERSIBLE PUMPS AQ80 Jet Pump Accessories Features: ■ Constant pressure at flow rates of 1/2 gpm or higher. ■ Pump runs continuously while service is needed. Your installation may be slightly different but the application is basically the same.) A pressure tank is recommended for optimum performance. ■ Retrofit to any existing pump and pressure tank system. (If installed with a submersible pump that develops more than 80 psi at the inlet of the AQ80. For flow rates above 20 gpm. Components of Jet Pump Installation Shown left is an example of a shallow well application for your jet pump with the constant pressure valve. (Pressure will be slightly different for each flow rate. WATER SUPPLY AQ80 Works at any flow rate above 1/2 gpm. ■ Handles flow rates up to 20 gpm. use a pressure regulator to protect the AquaGenie from excessive pressure. 3/8" polyethylene tubing and male connector. Air Charger 106594901 2 Notes: All weights are in pounds.NON-SUBMERSIBLE PUMPS Air Charger Kit Jet Pump Accessories Features: ■ Specifically designed to prevent water-logging typically associated with a conventional galvanized pressure tank. ■ Automatically maintains a proper balance of air and water volume in the tank. thus extending motor life and reducing power consumption. adapter nut. ■ Eliminates need for other costly equipment. 2-3 for model number explanation) Model Ordering No. ■ Eliminates frequent starts and stops. ■ Eliminates tank draining normally required with water-logged tanks. Ordering Information (See pgs. reducer bushing. Wt. 68 . ■ Unit consists of air charger. 88 1 11. ■ Precision molded glass-filled thermoplastic impeller.59” Dimensional Data 2. and long life.5" 115/230 91380020 76 WSP2CI-H 2 2" x 1. Extra smooth for high efficiency and durability.63” Ordering Information (See pgs. ■ Industry proven single phase motors are dual voltage.84” HP A 3/4 10.5" 115/230 91380015 72 WSP2CI 2 2" x 1.03” 4. quiet operation. Notes: All lengths are in inches.5" 115/230 91380007 64 WSP1CI 1 2" x 1.5 12. 2-3 for model number explanation) Model HP Suction x Discharge Voltage WSP07CI 3/4 2" x 1. 2. NRTL/C CSA108 UL778 ■ Glass-filled thermoplastic replaceable diffuser can be serviced easily and inexpensively to maintain pump efficiency.69” 10. All weights are in pounds. Wt.NON-SUBMERSIBLE PUMPS WSP Series Self-Priming Sprinkler Pumps Features: ■ Reliable standard 5/8" rotating mechanical shaft seal.65 7. ■ 2" NPT suction.00” ■ Built-in drain plug for easy winterizing and servicing.95” 2. ■ Rugged pump case constructed with heavy-duty cast iron ensures optimum durability. ■ Integral priming plug to facilitate rapid priming. 1. 9.59” 2.5" 115/230 91380010 66 WSP15CI 1-1/2 2" x 1.88 1. set to run with either 115 or 230 V incoming power.5" NPT discharge.63” 2. 69 .5" 115/230 91381020 76 Pump Unit Order No.63 2 12. 10 5 5 5 5 63 72 90 97 52 62 80 90 5 97 90 Notes: All lengths are in inches. 70 4 40 14 80 16 18 40 Shut-Off Pressure PSI 40 46 64 74 12 20 40 47 45 46 47 48 74 47 48 100 20 22 GPM 24 M3PH .5 hp 80 1 hp 20 60 3/4 hp 40 10 20 0 0 0 0 Model 3/4 1 1.5 2 2 20 2 6 8 60 10 12 Discharge Pressure .NON-SUBMERSIBLE PUMPS WSP Series 40 FEET METERS Performance Curves and Charts 120 30 2 hp 100 1.PSI 20 30 Gallons per Minute Suction Lift Ft. All weights are in pounds.NON-SUBMERSIBLE PUMPS WCE Series End Suction Centrifugal Pumps Features: ■ Standard Buna with carbon ceramic mechanical seal. Wt. ■ Heavy duty cast gray iron.5 WCE2CI 2 1-1/4" x 1" 1.5 2 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1. NRTL/C CSA108 UL778 Noryl ® is a registered trademark of G.5" x 1-1/4" Voltage Pump Unit Order No. single-phase square flange drip-proof motor for easy service and reliability. 71 . (NPT) A B C D E F G H 1/2 3/4 1 1. 115/230 91390010 37 115/230 91390015 42 115/230 91390020 46 Notes: All lengths are in inches. ■ Enclosed glass filled Noryl® impeller with reinforced SS hub.5" 1" 1" 1" 1" 1-1/4" 13-3/4" 14-5/64" 15-37/64" 15-29/32" 15-53/64" 2-5/8" 2-5/8" 2-5/8" 2-5/8" 2-7/8" 5-17/32" 5-17/32" 5-17/32" 5-17/32" 5-7/8" 4" 4" 4" 4" 4-23/32" 3-11/16" 3-11/16" 3-11/16" 3-11/16" 4-1/8" 4-29/32" 4-29/32" 4-29/32" 4-29/32" 6-5/16" 8-29/32" 8-29/32" 8-29/32" 8-29/32" 10-25/32" 4" 4" 4" 4" 4-15/32" Ordering Information Suction x Discharge HP WCE05CI 1/2 115/230 91390005 31 WCE07CI 3/4 115/230 91390007 32 WCE1CI 1 WCE15CI 1. E SUCTION D DISCHARGE F G H 7/16” 15/16” 3” MOUNT SURFACE 4. (NPT) Disch. ■ Shaft flinger combined with large drain hole in adapter prevents moisture from damaging bearings. Model No. thick wall. ■ Ports for air bleeding when priming for draining to prevent frost damage. ■ 3600 RPM.88” B C 3” A Dimensional Data HP Suct.E. NON-SUBMERSIBLE PUMPS WCE Series 45 FEET METERS Performance Curves and Charts 140 40 2 hp 120 1.5 1-1/4" x 1" 67 65 63 59 54 49 39 24 - 2 1.5" x 1-1/4" 104 97 92 88 81 75 66 48 15 Notes: All lengths are in inches. 72 4 40 .5 hp 1 hp 30 100 3/4 hp 80 1/2 hp 20 60 40 10 20 0 0 0 0 20 2 HP Suction x Discharge 6 8 60 10 20 30 40 12 14 80 16 100 18 20 Capacities GPM Total Head in Ft 50 60 70 22 80 GPM 24 M3PH 100 120 1/2 1-1/4" x 1" 46 38 32 24 115 - - - - 3/4 1-1/4" x 1" 55 52 47 38 32 25 15 - - 1 1-1/4" x 1" 60 57 54 49 44 39 32 12 - 1. ■ Filtration . set to run with either 115V or 230V incoming power. such as Celcon® for impellers. flow rates from 5 to 25 gpm.NON-SUBMERSIBLE PUMPS WHB Series Horizontal Booster Pumps Cast Iron Features: ■ Designed for boosting water pressure from a variety of sources including municipal and private water systems. Viton ® is a registered trademark of Dupont Dow Elastomers.984) Tri-Seal floating stage system. and temperatures up to 120 °F (49 °C). ■ Stainless steel motor bracket with a rugged support foot for horizontal or vertical mounting. ■ The booster pump is built by Franklin Electric’s Patented (U. and 300 Series stainless steel for the hub. Celcon ® is a registered trademark of the Celanese Corporation. They are not rated for outdoor installations. ■ General purpose pumping. simplifying installation and maintenance. Patent 7.S. longevity. ■ Evaporative cooling system/misters.O. ■ Cast iron motor bracket with a rugged support foot for horizontal or vertical mounting.stainless steel WHB. ■ Poultry houses. ■ Assembled with the highest quality materials of construction. for maximum efficiency. while 3 hp are 230V.O. ■ Shut-off pressures up to 270 PSI. ● ● Viton ® mechanical seal 1/3 through 3 hp high service factor A. Stainless Steel Features: Include all of the Cast Iron features above plus: ■ Stainless steel models industrial applications: CSA ENC 3 COF CSA 3 C US LR 80980 Notes: 3 hp WHB pumps are for indoor installations only. ■ Spray cooling equipment. ■ Easily serviced through a back pull-out design. ■ Lawn and crop irrigation. and a handle for portability of the unit. ■ Industry proven square flange motors from A.290. and performance. and a handle for portability of the unit. ■ Reverse osmosis . Smith motors. which leaves all plumbing and the pump undisturbed in their original location. ■ Stainless steel discharge head on all models.stainless steel WHB. ■ Pressure washing buildings and floors. Smith. Applications: ■ Boosting water pressure from either city mains or private water systems. eye seals.E. Noryl ® is a registered trademark of G. Noryl® for the diffusers. ■ 1-1/4” suction and 1” discharge are the same across the entire line. 73 . shaft and shell. ■ 1/2 through 2 hp motors are dual voltage. ■ Water circulation. 5 2 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 115/230 10WHBT05C4 10WHBT07C4 10WHBT1C4 10WHBT15C4 10WHBT2C4 95911005 95911010 95911015 95911020 95911025 35 39 42 48 55 15 3/4 1 1. Wt. 5WHBT03S4 5WHBT05S4 5WHBT07S4 5WHBT1S4 95900505 95900510 95900515 95900520 33 37 41 46 115/230 115/230 115/230 115/230 7WHBT05S4 7WHBT07S4 7WHBT1S4 7WHBT15S4 95900710 95900715 95900720 95900725 37 40 46 53 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 115/230 10WHBT05S4 10WHBT07S4 10WHBT1S4 10WHBT15S4 10WHBT2S4 95901010 95901015 95901020 95901025 95901030 37 39 45 52 56 3/4 1 1. 25WHBT1S4 25WHBT15S4 25WHBT2S4 25WHBT3S4 95902520 95902525 95902530 95902535 44 48 54 66 Model No. Order No.NON-SUBMERSIBLE PUMPS WHB Series Ordering Information (See pgs. Cast Iron 74 GPM HP Suction x Discharge Voltage Order No. .5 2 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 15WHBT07S4 15WHBT1S4 15WHBT15S4 15WHBT2S4 95901515 95901520 95901525 95901530 39 44 49 55 3/4 1 1.5 2 3 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 230 25WHBT1C4 95912515 41 25WHBT15C4 95912520 46 25WHBT2C4 95912525 51 25WHBT3C4 95912535 69 Notes: All weights are in pounds. 2-3 for model number explanation) Stainless Steel (With Viton® mechincal seal and high service factor A.5 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 7WHBT05C4 7WHBT07C4 7WHBT1C4 7WHBT15C4 95910705 95910710 95910715 95910720 36 40 43 48 10 1/2 3/4 1 1.5 1-1/4" x 1" 115/230 25 2 1-1/4" x 1" 115/230 3 1-1/4" x 1" 230 Viton ® is a registered trademark of Dupont Dow Elastomers.5 2 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 15WHBT07C4 15WHBT1C4 15WHBT15C4 15WHBT2C4 95911510 95911515 95911520 95911525 39 41 47 52 20 3/4 1 1. Wt. Smith motor) GPM HP Suction x Discharge Voltage 5 1/3 1/2 3/4 1 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 7 1/2 3/4 1 1.5 2 3 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 230 20WHBT07C4 20WHBT1C4 20WHBT15C4 20WHBT2C4 20WHBT3C4 95912010 95912015 95912020 95912025 95912035 39 41 47 54 70 25 1 1. 5 1/2 3/4 1 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 5WHBT05C4 5WHBT07C4 5WHBT1C4 95910505 95910510 95910515 36 40 43 7 1/2 3/4 1 1.zO.5 2 3 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 115/230 115/230 115/230 115/230 230 20WHBT07S4 20WHBT1S4 20WHBT15S4 20WHBT2S4 20WHBT3S4 95902015 95902020 95902025 95902030 95902035 39 44 51 55 67 1 1-1/4" x 1" 115/230 1.5 2 15 20 Model No.5 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 1-1/4" x 1" 10 1/2 3/4 1 1. 2 1.0 6 1.4 7 1.6 4 0.8 Stainless Steel Models 5 1.4 3 0.6 8 GPM 1.2 2 0.8 M3PH Cast Iron Models 75 .NON-SUBMERSIBLE PUMPS WHB Series PUMP OPERATING RANGE FEET METERS 5 gpm Performance Curves BEST EFFICIENCY RANGE 700 200 180 5WHBT1S4 (1 hp) 600 160 500 5WHBT07S4 (3/4 hp) 5WHBT1C4 (1 hp) 140 120 400 5WHBT05S4 (1/2 hp) 5WHBT07C4 (3/4 hp) 100 300 5WHBT03S4 (1/3 hp) 5WHBT05C4 (1/2 hp) 50 FT 80 60 200 0.5 GPM 40 100 20 0 0 0 1 0 0. 0 Stainless Steel Models 76 6 7 1.NON-SUBMERSIBLE PUMPS WHB Series 240 PUMP OPERATING RANGE FEET METERS 7 gpm Performance Curves BEST EFFICIENCY RANGE 800 7WHBT15S4 (1.5 GPM 40 100 20 0 0 0 0 1 2 0.0 Cast Iron Models 10 11 GPM M3PH .5 hp) 220 700 200 180 600 7WHBT1S4 (1 hp) 7WHBT15C4 (1.5 hp) 160 500 140 120 7WHBT07S4 (3/4 hp) 7WHBT1C4 (1 hp) 400 7WHBT05S4 (1/2 hp) 7WHBT07C4 (3/4 hp) 100 300 80 60 50 FT 7WHBT05C4 (1/2 hp) 200 0.5 3 4 5 1.5 8 9 2. 5 hp) 400 100 10WHBT07S4 (3/4 hp) 10WHBT1C4 (1 hp) 300 60 50 FT 80 10WHBT05S4 (1/2 hp) 10WHBT07C4 (3/4 hp) 200 1 GPM 10WHBT05C4 (1/2 hp) 40 100 20 0 0 0 2 0 0.0 12 2.0 16 GPM 3.5 Stainless Steel Models 10 2.5 M3PH Cast Iron Models 77 .5 hp) 10WHBT2C4 (2 hp) 160 500 140 120 10WHBT1S4 (1 hp) 10WHBT15C4 (1.NON-SUBMERSIBLE PUMPS WHB Series 240 PUMP OPERATING RANGE FEET METERS 10 gpm Performance Curves BEST EFFICIENCY RANGE 800 220 700 10WHBT2S4 (2 hp) 200 180 600 10WHBT15S4 (1.5 14 3.0 6 8 1.5 4 1. 5 hp) 300 80 60 50 FT 15WHBT07S4 (3/4 hp) 15WHBT1C4 (1 hp) 200 1 GPM 15WHBT07C4 (3/4) 40 100 20 0 0 0 0 2 4 1.0 6 8 10 12 2.0 Cast Iron Models 20 22 GPM 5.5 hp) 15WHBT2C4 (2 hp) 140 120 400 100 15WHBT1S4 (1 hp) 15WHBT15C4 (1.0 M3PH .0 16 18 4.NON-SUBMERSIBLE PUMPS WHB Series PUMP OPERATING RANGE FEET METERS 15 gpm Performance Curves BEST EFFICIENCY RANGE 700 200 180 15WHBT2S4 (2 hp) 600 160 500 15WHBT15S4 (1.0 Stainless Steel Models 78 14 3. 5 GPM 40 20WHBT07C4 (3/4 hp) 100 20 0 0 0 0 5 1 10 2 15 3 Stainless Steel Models 20 4 25 5 30 6 7 GPM M3PH Cast Iron Models 79 .5 hp) 60 200 20WHBT07S4 (3/4 hp) 20WHBT1C4 (1 hp) 2.NON-SUBMERSIBLE PUMPS WHB Series 180 PUMP OPERATING RANGE FEET METERS 20 gpm Performance Curves BEST EFFICIENCY RANGE 600 20WHBT3S4 (3 hp) 20WHBT3C4 (3 hp) 160 500 140 20WHBT2S4 (2 hp) 120 400 20WHBT15S4 (1.5 hp) 20WHBT2C4 (2 hp) 100 300 80 50 FT 20WHBT1S4 (1 hp) 20WHBT15C4 (1. NON-SUBMERSIBLE PUMPS WHB Series PUMP OPERATING RANGE FEET METERS 25 gpm Performance Curves BEST EFFICIENCY RANGE 500 140 120 25WHBT3S4 (3 hp) 25WHBT3C4 (3 hp) 400 25WHBT2S4 (2 hp) 100 25WHBT15S4 (1.5 GPM 40 100 20 0 0 0 0 5 10 2 15 20 4 Stainless Steel Models 80 25 30 6 Cast Iron Models 35 40 GPM 8 M3PH .5 hp) 25WHBT2C4 (2 hp) 300 80 25WHBT1S4 (1 hp) 25WHBT15C 4 (1.5 hp) 200 50 FT 60 25WHBT1C4 (1 hp) 2. 60” 20.63” 13.69” 31.99” 22.0 7 8 11 15 18 10.07” 14.38” 11.45” 25.88” 12.18” 12.27” 13.31” 19.09” 17.54” 23.00” 11.98” 17.0 3.31” 21.59” 21.0 6 8 10 13 11.50 1.62” 39.0 3.88” 12.00” 13.96” 19.97” 30.69” 26.69” 26.12” 25.90” 24.00” 11.60” 23.00” 11.31” 24.60” 31.63” 13.63” 13.5 2.12” 10 1/2 3/4 1 1.5 2.07” 14.17” 14.84” 81 .0 3.96” 19.00” 11.0 4 5 7 10 15 10.88” 12.63” 14.31” 15.11” 23.5 2.38” 11.17” 36.24” 22.14” 17.38” 11.00” 11.94” 36.67” 14.63” 10.00” 11.87” 16.29” 25 1 1.52” 28.63” 14.88” 12.38” 11.17” 26.63” 12.5 8 10 14 19 10.69” 21.62” 36.04 Dimensional Data B 9.31” 24.99” 23.09” 17.00” 11.5 2.63” 12.98” 10 1/2 3/4 1 1.63” 10.87” 28.24” 23.54” 19.69” 21.02” 24.27” 14.59” 22.60” 7 1/2 3/4 1 1.35” 24.00” 11.98” 18.49” 15.63” 12.38” 11.5 2.63” 10.65” 24.52” 28.17” 26.66” 23.17” 32.5 6 8 10 14 9.97” 30.31” 19.0 5 7 10 12 15 11.98” 29.11” 24.86” 31.54 4.22” 20 3/4 1 1.63” 12.57” 33.63” 13.94” 7 1/2 3/4 1 1.88” 12.00” 11.64” 13.88” 12.87” 16.06” 39.12” 35.31” 15.66” 26.64” 15.5 2.04 A C 3.57” 33.63” 13.86” 31.0 5 6 8 12 10.30” 24.84” GPM HP Stage A B C 5 1/2 3/4 1 9 12 15 10.19” 32.5 2.94” 15 3/4 1 1.18” 15.43” 26.65” 15 3/4 1 1.NON-SUBMERSIBLE PUMPS WHB Series 6.98” 17.88” 12.99” 26.98” 29.62” 35.94” 20 3/4 1 1.18” 13.77 6.63” 12.5 2.38” 11.06” 25.38” 11.38” 11.0 5 7 8 11 15 9.98” 18.0 6 8 12 15 11.19” 32.45” 25.18” 12.0 4 6 8 13 11.27 3.14” 17.00” 11.75 Cast Iron Stainless Steel GPM HP Stage A B C 5 1/2 3/4 1 7 9 12 9.96” 31.0 3.87” 28.22” 23.64” 26.88” 15.17” 14.29” 25 1 1.02” 24.63” 12.88” 12.88” 12.88” 12. 88 27.88 14.75 32.94 10. ■ High flow impellers and stages are glass-filled Noryl® for added durability and strength. Noryl ® is a registered trademark of G. 82 .43 N/A 23.18 19.81 N/A 39. ■ Tie-rod construction for easy disassembly and service to impeller stack. ■ Stainless steel shell. The 50WVB is available in 1. Features: ■ Heavy-duty cast iron discharge housing and motor bracket for long life. ■ Top access to mechanical seal for easy replacement of seal without disturbing the plumbing or disassembling the pump.75 30. ■ Standard thrust motors which are available through normal distribution channels.94 14.56 12.75 19.64 32.5 hp models.51 16. ■ Unique design allowing rotation of either suction or discharge in 90 degree increments for optimum installation flexibility.5 hp models.20 19. ■ Maximum water temperature is 120 °F (49 °C).5 A B C 1-Phase 3-Phase 1-Phase 3-Phase 1-Phase 3-Phase 10.64 N/A 17.18 19.05 19.06 14.24 1-Phase 3-Phase 1-Phase 3-Phase 1-Phase 3-Phase 10.18 14.95 14.94 10.13 18. ■ Maximum operating pressure is 150 psi.5 hp through 7.75 19.56 18.05 25.5 2 3 5 7.43 38.30 N/A 46.18 14.04 26.66 28.95 30. C B A 2” NPT SUCTION 2-13/16” 9-3/16” 7-11/16” 50 GPM HP 1. 2” NPT DISCHARGE ■ 2" NPT suction x 2" NPT discharge.51 27. The 75WVB is available in 3 hp through 7.32 N/A 23.92 N/A 30.43 25.5 A B C Notes: Shaft turns counterclockwise if viewed from above motor. shaft coupling and pump shaft for increased durability.94 16. Designed with premium hydraulics for reliability and excellent performance.32 38.E.44 12.70 26.75 75 GPM BASE FOOTPRINT 19/32” HP 3 5 7.NON-SUBMERSIBLE PUMPS V6 Series High Pressure Vertical Booster Pumps The Water Horse V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required.13 28. NON-SUBMERSIBLE PUMPS V6 Series Ordering Information (See pgs. 2-3 for model number explanation) GPM 50 WVB Vertical Booster Pumps with Open Drip Proof Motors Single-phase Three-phase - 208-230/460V Model No. Order No. Wt. Model No. Order No. Wt. 1.5 50WVB15C6 91333915 100 50WVB15C6-T 91334913 103 2 50WVB2C6 91333923 105 50WVB2C6-T 91333964 108 3 50WVB3C6 91333931 109 50WVB3C6-T 91333972 112 5 50WVB5C6 91334301 208 50WVB5C6-T 91334327 188 50WVB7C6-T 91334293 225 HP 7.5 75 Not Available in Single-Phase 3 75WVB3C6 91334244 106 75WVB3C6-T 91334251 108 5 75WVB5C6 91334350 208 75WVB5C6-T 91334368 182 75WVB7C6-T 91334269 222 7.5 Not Available in Single-Phase Notes: Single-phase 1/3 - 2 hp motors rated 115/230 V. Single-phase 3-5 hp motor rated 230V. Three-phase motors rated 208-230/460V. 1.5 - 7.5 HP V6 Series Booster Pump Ends GPM 50 75 HP Pump Ends Only Model No. Order No. WVB Booster Pump - 575V Wt. Three-phase - 575V Model No. Order No. Wt. 1.5 50WVB15C6-PE 91334053 65 50WVB15C6-T5 91339019 103 2 50WVB2C6-PE 91334061 72 50WVB2C6-T5 91339020 108 3 50WVB3C6-PE 91334079 74 50WVB3C6-T5 91339021 112 5 50WVB5C6-PE 91334335 89 50WVB5C6-T5 91339034 188 7.5 50WVB7C6-PE 91334343 95 50WVB7C6-T5 91339035 225 3 75WVB3C6-PE 91334277 70 75WVB3C6-T5 91339036 108 5 75WVB5C6-PE 91334376 75 75WVB5C6-T5 91339037 182 7.5 75WVB7C6-PE 91334285 84 75WVB7C6-T5 91339038 222 Notes: All weights are in pounds. 83 NON-SUBMERSIBLE PUMPS V6 Series 250 7.5 hp 550 60 50 40 225 500 200 450 175 TOTAL HEAD - FEET 400 150 PSI EFFICIENCY % 50 gpm Performance Curves and Charts 125 100 5 hp 350 300 250 3 hp 200 75 2 hp 150 100 25 50 0 0 30 20 10 0 20 10 30 40 50 60 70 NPSHR 1.5 hp 50 0 80 CAPACITY - GALLONS PER MINUTE HP 1.5 2 3 5 7.5 Discharge Pressure at Pump with No Lift (Capacities in Gallons per Minute) 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 82 70 56 34 80 72 62 50 35 78 72 65 57 47 35 18 79 75 71 67 63 60 54 48 42 35 25 10 79 77 74 71 68 65 62 59 55 46 69 95 165 51 47 Notes: 1. Total discharge pressure of 1.5 thru 7.5 hp. V6 Series units should not exceed 150 psi. 2. Total discharge pressure of 75VB6P50 units should not exceed 400 psi. 84 Max Pres. (PSI) 43 38 31 25 17 238 NON-SUBMERSIBLE PUMPS V6 Series 60 7.5 hp 350 150 50 40 325 EFFICIENCY % 75 gpm Performance Curves and Charts 300 125 275 PSI 100 75 TOTAL HEAD - FEET 250 5 hp 225 200 175 150 125 3 hp 50 100 75 50 25 20 0 10 0 NPSHR 25 0 0 10 20 30 40 50 60 70 80 90 100 110 CAPACITY - GALLONS PER MINUTE HP 3 5 7.5 20 Discharge Pressure at Pump with No Lift (Capacities in Gallons per Minute) 30 35 40 50 60 70 80 90 100 110 120 130 100 82 70 50 108 104 140 Max Pres. (PSI) 48 94 86 76 58 20 106 100 94 88 93 82 76 66 56 20 143 Notes: 1. Total discharge pressure of V6 Series units should not exceed 150 psi. 85 25 kW 1 ⁄2 hp 0.75 1. 115 115 230 230 115 230 60 60 60 60 60 60 1.50 244 507 09--S WATER WELL 220 230 230 50 60 60 1. DRIVES AND CONTROLS 4" Submersible Motors 2-wire Models Description HP (kW) 1 ⁄3 hp 0. Please contact customer service for availability.75 115 115 220 230 230 115 230 60 60 50 60 60 60 60 1.00 1.MOTORS.60 1.40 244 508 23--S WATER WELL 220 230 230 50 60 60 1.00 1.40 244 558 12--S 244 508 12--S 244 508 90--S POLLUTION RECOVERY 230 60 1. available in any quantity.1 kW Motor Model Volts WATER WELL 3 Lead in motor WATER WELL 2-WIRE 2-WIRE 2-WIRE POLLUTION RECOVERY YES YES YES YES YES YES YES 244 502 01--S 244 502 90--S 244 503 01--S 244 503 90--S 244 502 09--S 244 503 09--S 244 504 01--S 244 504 90--S 244 555 01--S 244 505 01--S 244 505 90--S 244 504 09--S 244 505 09--S 244 557 01--S 244 507 01--S 244 507 90--S 244 309 23--S 1.00 1.50 POLLUTION RECOVERY 230 60 1. Pallet packs available but not shown. 3.30 244 359 12--S 244 309 12--S 244 309 90--S 230 60 1.75 kW 1. 86 Stock Status Downward Thrust Rating YES YES 300 LBS (1500 N) YES YES 300 LBS (1500 N) YES 300 LBS (1500 N) YES 650 LBS (3000 N) YES 650 LBS (3000 N) .75 1. Pack Designation: --S = Single Pack.F. All 3 hp motors are single-packed.00 1.37 kW W/PH Construction HZ S.50 1. Contact factory for lead time for non-stocked items.75 1.30 1.60 220 230 230 50 60 60 1.75 1.5 hp 1.60 1.75 1.60 1.30 2-WIRE POLLUTION RECOVERY WATER WELL 2-WIRE POLLUTION RECOVERY ⁄4 hp 0.60 1.40 1.60 1.55 kW 1 hp 0. 2. 60 1.40 1.37 kW WATER WELL 3-WIRE POLLUTION RECOVERY ⁄4 hp WATER WELL 3 0.00 1.75 1.30 POLLUTION RECOVERY 230 60 1.55 kW 1 hp 0.00 1. DRIVES AND CONTROLS 4" Submersible Motors 3-wire Models Description HP (KW) 1 ⁄3 hp 0.30 SERIES 600M 230 60 1.25 230 60 1.00 1.2 kW 3-WIRE 3-WIRE 3-WIRE 3-WIRE 3-WIRE POLLUTION RECOVERY Volts HZ S.40 POLLUTION RECOVERY 230 60 1.75 1.40 WATER WELL 220 230 230 50 60 60 1.50 230 60 1.00 1.00 1.1 kW 2 hp 1.15 YES 224 352 25 224 302 25 224 302 26 230 60 1.15 YES 224 302 0620 YES YES YES YES 300 LBS (1500 N) 300 LBS (1500 N) YES YES 300 LBS (1500 N) YES YES 650 LBS (3000 N) YES YES 230 YES YES YES 220 230 230 Downward Thrust Rating YES YES YES 650 LBS (3000 N) YES YES YES YES 650 LBS (3000 N) YES 282 352 81 282 302 81 282 302 81 YES YES 900 LBS (4000 N) YES 87 .30 WATER WELL 220 230 230 50 60 60 1.50 1.5 hp 1.60 1.5 kW 3 hp 2.00 1.75 1.F.25 YES 224 301 0610 50 60 60 1.75 115 115 220 230 230 115 230 60 60 50 60 60 60 60 1.MOTORS.40 SERIES 600M 230 60 1.60 1.50 WATER WELL 220 230 230 50 60 60 1. 115 115 220 230 230 115 230 60 60 50 60 60 60 60 1.25 POLLUTION RECOVERY SERIES 600M WATER WELL SERIES 600M Lead in motor YES YES YES YES YES Motor Model Control Stock Box Model Status 214 502 44--S 214 502 90--S 214 553 41--S 214 503 44--S 214 503 90--S 214 502 49--S 214 503 49--S 280 102 49 280 102 49 280 353 01 280 103 49 280 103 49 280 102 49 280 103 49 214 504 44--S 214 504 90--S 214 555 41--S 214 505 44--S 214 505 90--S 214 504 49--S 214 505 49--S 280 104 49 280 104 49 280 355 01 280 105 49 280 105 49 280 104 49 280 105 49 214 557 41--S 214 507 44--S 214 507 90--S 280 357 01 280 107 49 280 107 49 214 507 49--S 280 107 49 YES 214 507 0600 YES 214 558 19--S 214 508 12--S 214 508 90--S 280 358 01 280 108 49 280 108 49 214 508 23--S 280 108 49 214 508 0610 YES 224 350 19--S 224 300 19--S 224 300 92--S 282 350 81 282 300 81 282 300 81 224 300 23--S 282 300 81 224 300 0610 YES 224 351 19--S 224 301 19--S 224 301 92--S 282 351 81 282 301 81 282 301 81 224 301 23--S 282 301 81 60 1.60 1.15 1.75 1.00 1.25 kW W/ PH Construction WATER WELL 3-WIRE POLLUTION RECOVERY 1 ⁄2 hp 0.75 kW 1.30 1.25 1.50 SERIES 600M 230 60 1.60 1.60 220 230 230 50 60 60 1.75 1. 00 1.F.60 1. Pallet packs available but not shown. 200 200 220 230 230 380/415 460 460 200 230 460 60 60 50 60 60 50 60 60 60 60 60 1.60 1.50 1.40 460 60 1.00 1.MOTORS. 88 YES 300 LBS (1500 N) YES YES YES YES YES 650 LBS (3000 N) .40 1.40 1. All 3 hp motors are single-packed.40 1.40 1.60 1. 2.60 200 200 220 230 230 380/415 460 460 200 230 460 230 460 60 60 50 60 60 50 60 60 60 60 60 60 60 1.50 1. Please contact customer service for availability. available in any quantity. 3.00 1. Pack Designation: --S = Single Pack.50 1.40 1.55 kW 3-PHASE POLLUTION RECOVERY SERIES 600M WATER WELL 1 hp 0.37 kW W/PH Construction WATER WELL 3-PHASE POLLUTION RECOVERY WATER WELL ⁄4 hp 3 0.40 Lead in Motor YES YES YES YES YES YES YES YES Model Stock Status Downward Thrust Rating 234 501 41--S 234 501 92--S 234 551 41--S 234 511 41--S 234 511 92--S 234 561 31--S 234 521 31--S 234 521 94--S 234 501 49--S 234 511 49--S 234 521 49--S YES 300 LBS (1500 N) 234 502 41--S 234 502 92--S 234 552 41--S 234 512 41--S 234 512 92--S 234 562 31--S 234 522 31--S 234 522 94--S 234 502 49--S 234 512 49--S 234 522 49--S 234 512 0600 234 522 0600 YES 234 503 19--S 234 503 92--S 234 553 41--S 234 513 19--S 234 513 92--S 234 563 31--S 234 523 16--S 234 523 94--S 234 503 23--S 234 513 23--S 234 523 23--S 234 513 0610 YES 234 523 0610 YES YES YES 1.60 1.00 1.60 1.50 200 200 220 230 230 380/415 460 460 200 230 460 230 60 60 50 60 60 50 60 60 60 60 60 60 1.40 1.50 1.60 1. DRIVES AND CONTROLS 4" Submersible Motors Three-Phase Models Description HP (KW) 1 ⁄2 hp 0.00 1.50 1.00 1.40 1.75 kW 3-PHASE POLLUTION RECOVERY SERIES 600M Votls HZ S.50 1.50 1.50 1.40 1.50 1. Contact factory for lead time for non-stocked items.60 1.60 1.40 1.50 1. 15/1.15 1.15 1. DRIVES AND CONTROLS 4" Submersible Motors Three-Phase Models Description HP (KW) W/PH Construction WATER WELL 1.15/1.25 575 60 1.25 1.30/1.25 200 60 1.00 234 315 23--S 234 325 23--S 234 315 0610 234 325 0610 200 200 220 230 230 380 380 460/380 460/380 575 575 230 460/380 60 60 50 60 60 60 60 60/50 60/50 60 60 60 60 1.00 1.15 1.2 kW WATER WELL 3-PHASE SERIES 600M Lead in Motor Model Votls HZ S. Please contact customer service for availability.15 1.30 1.00 1. 2.30 1.F.00 1.25 234 305 23--S 230 460/380 230 460/380 60 60/50 60 60 1.00 1.30/1.30 1.25 1.00 1.00 1. Pack Designation: --S = Single Pack. Pallet packs available but not shown.30 1.00 1.MOTORS.00 200 200 220 230 230 460/380 460/380 575 60 60 50 60 60 60/50 60/50 60 1.1 kW 3-PHASE POLLUTION RECOVERY SERIES 600M WATER WELL 2 hp 1.25 1.15 1.15 1.30/1.25 1.25 1.30 1.25/1.00 YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES 234 504 19--S 234 504 92--S 234 554 19--S 234 514 19--S 234 514 92--S 234 524 16--S 234 524 94--S 234 534 16--S 234 534 94--S 234 504 23--S 234 514 23--S 234 524 23--S 234 514 0610 234 524 0610 234 305 16--S 234 305 92--S 234 355 19--S 234 315 16--S 234 315 92--S 234 325 16--S 234 325 94--S 234 335 16--S 234 335 94--S 234 306 25--S 234 306 26--S 234 356 25--S 234 316 25--S 234 316 26--S 234 346 25--S 234 346 26--S 234 326 25--S 234 326 26--S 234 336 25--S 234 336 26--S 234 316 0620 234 326 0620 Stock Status Downward Thrust Rating YES YES YES 650 LBS (3000 N) YES YES YES YES YES YES YES 650 LBS (3000 N) YES YES YES YES YES 900 LBS (4000 N) YES YES 1.30/1. available in any quantity. 200 200 220 230 230 460/380 460/380 575 575 200 230 460/380 230 460/380 60 60 50 60 60 60/50 60/50 60 60 60 60 60/50 60 60 1.15 1.30 1.25/1.15 1.25/1.15 1. All 3 hp motors are single-packed. Contact factory for lead time for non-stocked items.25 1.25/1.00 1. 3. 89 .30 1.15/1.30 1.00 1.00 1.00 1.5 hp 1.30 1.5 kW 3-PHASE POLLUTION RECOVERY SERIES 600M 3 hp 2. 5 .2 0.3 0.3 .1.5 .37 .1.25 .3 .MOTORS. DRIVES AND CONTROLS 4" Submersible Motors Super Stainless Models 4" Super Stainless Motor Specifications Hz Ph Hp Range kW Range Poles RPM Max.1.2 0. Tefzel ® is a registered trademark of E.5 2 2875 86 °F/30 °C Continuous* * 3 hp motors require 0.25 .5 .2 2 2875 86 °F/30 °C Continuous* 4" Pollution Recovery Motor Specifications Hz Ph Hp Range kW Range Poles RPM Max. Duty Rating 60 2-Wire 0.3 .3 .25 ft/sec fl ow past motor.2 2 2875 86 °F/30 °C Continuous* 60 Three-Phase 0. 90 .1.2 2 3450 86 °F/30 °C Continuous* 50 Three-Phase 0. 4" Construction Materials Construction Type Pollution Recovery Component Standard Water Well Castings 304 SS over Iron 304 SS over Iron Stator Shell 301 SS 301 SS Shaft Extension 17-4 SS or 303 SS 303 SS Fasteners 305 SS or 302 SS 316 SS Seal Cover Acetal Tefzel ® Seal Nitrile Rubber Lip Viton ® Diaphragm Nitrile Rubber Viton ® Slinger Nitrile Rubber Viton ® Lead Wire (or Cable) XLPE Lead not furnished with motor Lead Potting Epoxy Lead not furnished with motor Lead Jam Nut 303 SS Lead not furnished with motor Specifications subject to change without notice.37 .5 0.2.5 0.5 2 3450 86 °F/30 °C Continuous* 50 Three-Phase 0.1.2.2.25 . Ambient Temp.1.1.5 0.2 0.37 .1 2 2875 86 °F/30 °C Continuous 60 3-Wire 0.25 .2 0. Ambient Temp.3 0.3 0.5 .1.1. Duty Rating 60 2-Wire 0. du Pont Nemours and Company.2.5 .5 .37 .3 .1 2 3450 86 °F/30 °C Continuous 50 2-Wire 0.5 2 2875 86 °F/30 °C Continuous* 60 Three-Phase 0.1. Viton ® is a registered trademark of DuPont Dow Elastomers.1 2 3450 86 °F/30 °C Continuous 50 2-Wire 0. Contact Franklin Electric if current material types are required for bid specifications.3 .25 .I.37 .25 .37 .1 2 2875 86 °F/30 °C Continuous 60 3-Wire 0.1.1.5 0.5 2 3450 86 °F/30 °C Continuous* 50 3-Wire 0.3 0.2 2 3450 86 °F/30 °C Continuous* 50 3-Wire 0. 30/1.30 1.25 1.00 1.F.25 1.30 1.1 kW 316 SS WATER WELL 2 hp 1.25/1.00 1. 1P 3P 3P 3P 3P 1P 3P 3P 3P 3P 230 200 230 460/380 575 230 200 230 460/380 575 60 60 60 60/50 60 60 60 60 60/50 60 1.25 1.30 1P 3P 3P 3P 3P 1P 1P 3P 3P 3P 3P 1P 3P 3P 230 200 230 460/380 575 230 230 200 230 460/380 575 230 230 460/380 60 60 60 60/50 60 60 60 60 60 60/50 60 60 60 60/50 1.30 1.15 1.25 1.30 1.00 1.25 1.30 1.MOTORS.30/1.5 kW SAND FIGHTER 316 SS OIL STRIPPER PH Volts HZ S.25/1.30 1.25 1.25 1.25/1.25 1. DRIVES AND CONTROLS 4" Submersible Motors High Thrust Models Description HP (KW) Construction WATER WELL 1.00 Lead in Motor YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES Model Stock Status Downward Thrust Rating 224 300 8600 234 504 8600 234 514 8600 234 524 8600 234 534 8600 224 300 8502 234 504 8502 234 514 8502 234 524 8502 234 534 8502 1500 LBS (6500 N) 224 301 8602 234 305 8600 234 315 8600 234 325 8600 234 335 8600 224 301 8802 224 301 8502 234 305 8502 234 315 8502 234 325 8502 234 335 8502 224 301 8702 234 315 8702 234 325 8702 1500 LBS (6500 N) 91 .25 1.00 1.25 1.30 1.5 hp 1. 00 1.15/1.15/1.MOTORS.15 1.15 1.15 1.15 1.15 1.15 1.00 460/415-380 60/50 1. 1P 1P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 220 230 230 200 200 220 230 230 380 380 460/380 460/380 575 575 200 230 460/380 575 380 230 200 230 50 60 60 60 60 50 60 60 60 60 60/50 60/50 60 60 60 60 60/50 60 60 60 60 60 1.00 YES 234 326 8802 60 60 60 60 60 60 60 60 60/50 60 60 60 60/50 1.00 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 3P 460/380 60/50 3P 3P 1P 3P 3P 1P 3P 3P 3P 3P 1P 3P 3P 575 380 230 230 460/380 230 200 230 460/380 575 230 230 460/380 3P 3P Lead in Motor Model YES YES YES YES YES YES YES YES YES 224 352 8600 224 302 8600 224 302 8602 234 306 8600 234 306 8602 234 356 8600 234 316 8600 234 316 8602 234 346 8600 234 346 8602 234 326 8600 234 326 8602 234 336 8600 234 336 8602 234 306 8902 234 316 8902 234 326 8902 234 336 8902 234 346 8902 224 302 8802 234 306 8802 234 316 8802 1.00 1.15/1.15 1.15/1.2 kW SAND FIGHTER SERIES 600M 316 SS OIL STRIPPER 4 hp 3 kW 92 WATER WELL PH Votls HZ S.15/1.15/1.15 1.15 1.15/1.15 1.15/1.00 YES YES YES YES YES 234 395 8600 YES 234 395 8602 Stock Status Downward Thrust Rating YES 1500 LBS (6500 N) YES YES YES YES YES 1500 LBS (6500 N) .15 1. DRIVES AND CONTROLS 4" Submersible Motors High Thrust Models Description HP (KW) Construction WATER WELL 3 hp COALBED METHANE 2.15 1.00 YES YES YES YES YES YES YES YES YES YES YES YES YES 234 336 8802 234 346 8802 224 302 0630 234 316 0630 234 326 0630 224 302 8502 234 306 8502 234 316 8502 234 326 8502 234 336 8502 224 302 8702 234 316 8702 234 326 8702 460/415-380 60/50 1.15/1.00 1.15 1.15 1.00 1.00 1.15 1.15 1.15 1.15 1.15 1.F.00 1. 15 1.15 1.00 1.00 1.5 hp 4 kW WATER WELL Lead in Motor Model PH Votls HZ S.00 1.15/1. DRIVES AND CONTROLS 4" Submersible Motors High Thrust Models Description HP (KW) Construction WATER WELL 5 hp COALBED METHANE 3.00 3P 460/380 60/50 1.MOTORS.15/1.15 1.15/1.F.7 kW SAND FIGHTER SERIES 600M 316 SS OIL STRIPPER 5.15 1.15 1.15 1.15/1.15 1.15 YES 234 317 0630 39 1P 3P 3P 3P 3P 1P 3P 3P 460/380 230 200 230 460/380 575 230 230 460/380 60 60 60 60 60/50 60 60 60 60/50 1.00 YES YES YES YES YES 234 397 8600 YES 234 397 8602 Stock Status Downward Thrust Rating YES YES YES YES YES YES YES YES YES 1500 LBS (6500 N) YES YES YES YES 1500 LBS (6500 N) 93 .00 1.15 1.15 1.00 1.15/1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15/1.15/1.00 YES YES YES YES YES YES YES YES YES 234 327 0630 224 303 8502 234 307 8502 234 317 8502 234 327 8502 234 337 8502 224 303 8702 234 317 8702 234 327 8702 3P 460/380 60/50 1.15 1.15 YES YES YES YES YES YES YES YES YES YES YES YES YES 224 353 8600 224 303 8600 224 303 8602 234 307 8600 234 307 8602 234 357 8600 234 317 8600 234 317 8602 234 347 8600 234 347 8602 234 327 8600 234 327 8602 234 337 8600 234 337 8602 234 307 8902 234 317 8902 234 327 8902 234 337 8902 234 347 8902 224 303 8802 234 307 8802 234 317 8802 234 327 8802 234 337 8802 234 347 8802 224 303 0630 3P 230 60 1.00 1. 1P 1P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 1P 220 230 230 200 200 220 230 230 380 380 460/380 460/380 575 575 200 230 460/380 575 380 230 200 230 460/380 575 380 230 50 60 60 60 60 50 60 60 60 60 60/50 60/50 60 60 60 60 60/50 60 60 60 60 60 60/50 60 60 60 1.15 1.15/1.15 1.00 1.15 1.00 1.15 1.15 1.15/1. 15/1.15/1.00 1.15 1. DRIVES AND CONTROLS 4" Submersible Motors High Thrust Models Description HP (KW) Construction WATER WELL 7.00 1.15/1.15 1.15 1.15/1.15 1.5 kW COALBED METHANE SAND FIGHTER 94 Lead in Motor Model PH Volts HZ S.15 1.00 1.15 YES YES YES YES YES YES YES YES YES 234 549 8602 234 595 8602 234 598 8602 234 549 8904 234 595 8904 234 598 8904 234 549 8802 234 595 8802 234 598 8802 YES YES YES YES Stock Status Downward Thrust Rating YES YES YES YES YES YES 1500 LBS (6500 N) YES YES YES YES YES YES 1500 LBS (6500 N) .F.15 1.15 1.15 1.15 1.00 YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES 234 308 8600 234 308 8602 234 358 8600 234 318 8600 234 318 8602 234 348 8600 234 348 8602 234 328 8600 234 328 8602 234 338 8600 234 338 8602 234 308 8904 234 318 8904 234 328 8904 234 338 8904 234 348 8904 234 308 8802 234 318 8802 234 328 8802 234 338 8802 234 348 8802 234 308 8502 234 318 8502 234 328 8502 234 338 8502 234 318 8702 234 328 8702 3P 3P 3P 3P 3P 3P 3P 3P 3P 380 460/380 575 380 460/380 575 380 460/380 575 60 60/50 60 60 60/50 60 60 60/50 60 1.00 1.15 1.15 1.15/1.15 1.00 1.15/1.MOTORS.15 1.15 1.5 kW COALBED METHANE SAND FIGHTER 316 SS OIL STRIPPER WATER WELL 10 hp 7.15/1.15 1.15 1.15 1.00 1.15/1.15 1. 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 200 200 220 230 230 380 380 460/380 460/380 575 575 200 230 460/380 575 380 200 230 460/380 575 380 200 230 460/380 575 230 460/380 60 60 50 60 60 60 60 60/50 60/50 60 60 60 60 60/50 60 60 60 60 60/50 60 60 60 60 60/50 60 60 60/50 1.5 hp 5.15 1.15 1.00 1.15 1.15 1.15 1.15 1.00 1.15 1.15/1.00 1. Painted Cast Iron 301 SS Low Carbon Steel 17-4 SS 300 Series SS Acetal Nitrile Rubber Lip Nitrile Rubber 316 SS 316 SS Gray Iron Nitrile Rubber 303 SS 303 SS Over Iron. 95 .7 2 2875 86 °F/30 °C Continuous at 0.25 ft/sec fl ow past motor 50 1 1.25 ft/sec fl ow past motor Note: Not all ratings available in all construction options.7.MOTORS.5 2 3450 86 °F/30 °C Continuous at 0. Duty Rating 60 1 1. factory-installed in 60 Hz and dual frequency rated water well motors.25 ft/sec fl ow past motor 50 3 1.5 1. Consult catalog for additional leads. Painted Cast Iron 301 SS Low Carbon Steel 17-4 SS 300 series SS Sintered Bronze Sand Fighter™ SiC/ SiC Mech Seal Nitrile Rubber 316 SS 316 SS Gray Iron Nitrile Rubber 301 SS Low Carbon Steel 17-4 SS 300 series SS Sintered Bronze Sand Fighter SiC/ SiC Mech Seal Nitrile Rubber 316 SS 316 SS 304 SS Nitrile Rubber XLPE* XLPE* XLPE* Epoxy Epoxy Epoxy 316 SS 316 SS 316 SS Delrin & Polyester Delrin & Polyester Delrin & Polyester Bottom Castings Stator Shell Stator Ends Shaft Extension Fasteners Seal Cover Seal Diaphragm Diaphragm Cup Diaphragm Spring Diaphragm Cover Slinger Lead Wire (or Cable) Lead Potting Lead Screws/ Clamp Filter Sand Fighter™ 303 SS 303 SS Over Iron.10 1.7 2 3450 86 °F/30 °C Continuous at 0.5 1. Contact Franklin Electric if current material types are required for bid specifications.5 .1 . Ambient Temp. Specifications subject to change without notice.25 ft/sec fl ow past motor 60 3 1.5 . DRIVES AND CONTROLS 4" Submersible Motors High Thrust Models 4" High Thrust Motor Specifications Hz Ph Hp Range kW Range Poles RPM Max.7.10 1. Painted Cast Iron Construction Type Component Chemical (316 STNLS) Oil Stripper Top Casting Bottom Casting Stator Shell Stator Ends Shaft Extension Fasteners Seal Cover Seal Diaphragm Diaphragm Cup Diaphragm Spring Diaphragm Cover Slinger Lead Wire (or Cable) Lead Potting Lead Screws/Clamp Filter 316 SS 316 SS 316 SS 316 SS 17-4 SS 316 SS 316 SS Sand Fighter SiC Mech Seal Nitrile Rubber 316 SS 316 SS 316 SS Nitrile Rubber XLPE* Epoxy 316 SS 316 SS Plug 316 SS 316 SS 316 SS 316 SS 17-4 SS 316 SS 316 SS Sand Fighter Viton ® Viton ® 316 SS 316 SS 316 SS Viton ® XLPE* Epoxy 316 SS 316 SS Plug * Removable type.3.1 .1 . Viton ® is a registered trademark of DuPont Dow Elastomers.3.5 .1 .5 2 2875 86 °F/30 °C Continuous at 0.5 . 4" High Thrust Construction Materials Component Standard Water Well Construction Type Coalbed Methane Top Castings 303 SS 303 SS Over Iron. MOTOR WARRANTY IS VOID if Franklin-supplied leads are not used.2 INDIVIDUAL XLPE 303 SS 100 in 2.5 INDIVIDUAL XLPE 303 SS 48 in 1. 2.2 AWG 14 YES 152 553 905 2. 1.0 AWG 14 NO 152 255 904 INDIVIDUAL NITRILE* 316 SS 30 ft 9.MOTORS.5 AWG 14 NO 152 255 902 INDIVIDUAL NITRILE* 316 SS 160 in 4.5 AWG 14 YES 152 553 906 M Wire Size INDIVIDUAL NITRILE* 316 SS 150 ft 45.2 AWG 14 YES 152 570 901 INDIV/DBL CONN XLPE 316 SS 100 in 2.2 INDIVIDUAL NITRILE* 316 SS 100 in 2.5 AWG 14 NO 152 255 910 IN / FT Grounded Model AWG 14 NO 152 328 905 AWG 14 NO 152 328 906 AWG 14 YES 152 552 905 AWG 14 YES 152 552 906 1.5 INDIVIDUAL XLPE 316 SS 48 in INDIVIDUAL XLPE 316 SS 100 in INDIVIDUAL NITRILE* 316 SS 48 in 1. 96 .5 AWG 14 YES 152 570 902 * Nitrile material not for use in potable water.2 AWG 14 NO 152 255 901 INDIVIDUAL NITRILE* 316 SS 100 in 2.1 AWG 14 NO 152 255 906 INDIVIDUAL NITRILE* 316 SS 50 ft 15. Refer to Franklin Application Installation Maintenance (AIM) Manual for accurate cable sizing.2 AWG 14 NO 152 255 907 INDIVIDUAL NITRILE* 316 SS 100 ft 30. DRIVES AND CONTROLS 4" Submersible Motors Leads & Cables Red Black Black Black Bushing Outer Sleeve Yellow Black Black Yellow Yellow Red Red Green Wire 2W 3W Green Lead Length Construction Material Jam Nut Material INDIVIDUAL NITRILE* 316 SS 48 in 1.7 AWG 14 NO 152 255 912 INDIV/DBL CONN XLPE 316 SS 48 in 1. 00 1.15 1. # Leads Wire Size (AWG) Model PH Volts HZ Subtrol Heat Sensor 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 230 200-208 220 220 230 230 380 380 415 460/380-415 60 60 50 50 60 60 60 60 50 60/50 Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available 1.00 1.15 1. DRIVES AND CONTROLS 6" Submersible Motors Standard Models Description HP (KW) Construction WATER WELL 5 hp 3.15 1.00 1.00 1.15/1.15 1.15 3 #10 w/GND 236 660 81 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 380 415 460/380-415 460/380-415 575 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 60 50 60/50 60/50 60 60 60 50 50 60 60 60 60 50 60/50 60/50 60 YES YES YES YES YES Not Available YES YES YES YES YES YES YES YES YES YES YES 1.MOTORS.F.15 1.00 1.00 1.15 1.15 1.00 1.15 1.00 1.00 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND 226 110 90 236 650 90 236 680 90 236 670 90 236 600 90 236 720 90 236 660 90 236 780 90 236 690 90 236 610 90 3P 460/380-415 60/50 Not Available 1.7 kW SAND FIGHTER 316 SS S.15 1.00 1.15 3 3 3 3 6-90 ° 3 6-90 ° #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND 236 620 90 226 110 80 236 650 81 236 680 81 236 670 81 236 600 81 236 720 81 3P 380 60 YES 1.15/1.15 1.15 1.15 1.15 1.00 1.15/1.15 1.15 1.15/1.15 6-90 ° 3 3 6-90 ° 3 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND 236 780 81 236 690 81 236 610 81 236 710 81 236 620 81 226 110 39 236 650 40 236 680 40 236 670 40 236 600 40 236 720 40 236 660 40 236 780 40 236 690 40 236 610 40 236 710 40 236 620 40 Stock Status YES YES YES YES YES YES YES YES YES YES YES 97 .15 1.00 6-90 ° #10 w/GND 236 710 90 3P 1P 3P 3P 3P 3P 3P 575 230 200-208 220 220 230 230 60 60 60 50 50 60 60 Not Available Not Available YES YES YES YES YES 1.15/1.15 1.15 1.15/1.15 1.00 1.00 1. 15 1.00 1.15/1.15 1.15/1.00 1.00 1.15 1.15 1.00 1.15 1.15 1.15/1.00 1.15 1. 1.00 1.15 1.15 1.00 1.00 1.15 1.00 1.15 1.5 kW SAND FIGHTER 316 SS 98 PH Volts HZ 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 60 60 50 50 60 60 60 60 50 60/50 60/50 60 60 60 50 50 60 60 60 60 50 60/50 60/50 60 60 60 50 50 60 60 60 60 50 60/50 60/50 60 Description Subtrol Heat Sensor Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available YES YES YES YES YES YES YES YES YES YES YES Not Available YES YES YES YES YES YES YES YES YES YES YES S.15 1.15/1.15/1.15 1.00 1.5 hp 5.15 1.00 1.15 1.00 1.15 1.00 1.15 # Wire Size Leads (AWG) 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND Model 226 111 90 236 651 90 236 681 90 236 671 90 236 601 90 236 721 90 236 661 90 236 781 90 236 691 90 236 611 90 236 711 90 236 621 90 226 111 80 236 651 81 236 681 81 236 671 81 236 601 81 236 721 81 236 661 81 236 781 81 236 691 81 236 611 81 236 711 81 236 621 81 226 111 39 236 651 40 236 681 40 236 671 40 236 601 40 236 721 40 236 661 40 236 781 40 236 691 81 236 611 40 236 711 40 236 621 40 Stock Status YES YES YES YES YES YES YES YES YES YES YES YES YES .15 1.15 1.MOTORS. DRIVES AND CONTROLS 6" Submersible Motors Standard Models HP (KW) Construction WATER WELL 7.15 1.00 1.00 1.15/1.15 1.F. MOTORS, DRIVES AND CONTROLS 6" Submersible Motors Standard Models HP (KW) Description Construction WATER WELL 10 hp SAND FIGHTER 7.5 kW 316 SS PH Volts HZ Subtrol Heat Sensor S.F. # Leads Wire Size (AWG) Model 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 60 60 50 50 60 60 60 60 50 60/50 60/50 60 60 60 50 50 60 60 60 60 50 60/50 60/50 60 60 60 50 50 60 60 60 60 50 60/50 60/50 60 Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available YES YES YES YES YES YES YES YES YES YES YES Not Available YES YES YES YES YES YES YES YES YES YES YES 1.15 1.15 1.00 1.00 1.15 1.15 1.15 1.15 1.00 1.15/1.00 1.15/1.00 1.15 1.15 1.15 1.00 1.00 1.15 1.15 1.15 1.15 1.00 1.15/1.00 1.15/1.00 1.15 1.15 1.15 1.00 1.00 1.15 1.15 1.15 1.15 1.00 1.15/1.00 1.15/1.00 1.15 3 3 3 6-90 ° 3 6-90° 3 6-90 ° 3 3 6-90 ° 3 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND 226 112 90 236 652 90 236 682 90 236 672 90 236 602 90 236 722 90 236 662 90 236 782 90 236 692 90 236 612 90 236 712 90 236 622 90 226 112 80 236 652 81 236 682 81 236 672 81 236 602 81 236 722 81 236 662 81 236 782 81 236 692 81 236 612 81 236 712 81 236 622 81 226 112 39 236 652 40 236 682 40 236 672 40 236 602 40 236 722 40 236 662 40 236 782 40 236 692 40 236 612 40 236 712 40 236 622 40 Stock Status YES YES YES YES YES YES YES YES YES YES YES YES YES 99 MOTORS, DRIVES AND CONTROLS 6" Submersible Motors Standard Models HP (KW) Description Construction WATER WELL 15 hp 11 kW SAND FIGHTER 316 SS 100 PH Volts HZ Subtrol Heat Sensor 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 1P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 230 200-208 220 220 230 230 380 380 415 460/380-415 460/380-415 575 60 60 50 50 60 60 60 60 50 60/50 60/50 60 60 60 50 50 60 60 60 60 50 60/50 60/50 60 60 60 50 50 60 60 60 60 50 60/50 60/50 60 Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available Not Available YES YES YES YES YES YES YES YES YES YES YES Not Available YES YES YES YES YES YES YES YES YES YES YES S.F. # Leads Wire Size (AWG) Model 1.15 1.15 1.00 1.00 1.15 1.15 1.15 1.15 1.00 1.15/1.00 1.15/1.00 1.15 1.15 1.15 1.00 1.00 1.15 1.15 1.15 1.15 1.00 1.15/1.00 1.15/1.00 1.15 1.15 1.15 1.00 1.00 1.15 1.15 1.15 1.15 1.00 1.15/1.00 1.15/1.00 1.15 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 3 3 3 6-90 ° 3 6-90 ° 3 6-90 ° 3 3 6-90 ° 3 #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND #10 w/GND 226 113 90 236 653 90 236 683 90 236 673 90 236 603 90 236 723 90 236 663 90 236 783 90 236 693 90 236 613 90 236 713 90 236 623 90 226 113 80 236 653 81 236 683 81 236 673 81 236 603 81 236 723 81 236 663 81 236 783 81 236 693 81 236 613 81 236 713 81 236 623 81 226 113 39 236 653 40 236 683 40 236 673 40 236 603 40 236 723 40 236 663 40 236 783 40 236 693 40 236 613 40 236 713 40 236 623 40 Stock Status YES YES YES YES YES YES YES YES YES YES YES YES YES YES MOTORS, DRIVES AND CONTROLS 6" Submersible Motors Standard Models HP (KW) Construction WATER WELL 20 hp 15 kW SAND FIGHTER 316 SS Description Subtrol S.F. Heat Sensor Model Stock Status #8 w/GND 236 654 90 YES 3 #8 w/GND 236 684 90 6-90 ° #10 w/GND 236 674 90 3 #8 w/GND 236 604 90 1.15 6-90 ° #10 w/GND 236 724 90 1.15 3 #10 w/GND 236 664 90 Not Available 1.15 6-90 ° #10 w/GND 236 784 90 Not Available 1.00 3 #10 w/GND 236 694 90 Not Available 1.15/1.00 3 #10 w/GND 236 614 90 YES 60/50 Not Available 1.15/1.00 6-90 ° #10 w/GND 236 714 90 YES PH Volts HZ 3P 200-208 60 Not Available 1.15 3P 220 50 Not Available 1.00 3P 220 60 Not Available 1.15 3P 230 60 Not Available 1.15 3P 230 60 Not Available 3P 380 60 Not Available 3P 380 60 3P 415 50 3P 460/380-415 60/50 3P 460/380-415 # Wire Size Leads (AWG) 3 YES YES 3P 575 60 Not Available 1.15 3 #10 w/GND 236 624 90 3P 200-208 60 YES 1.15 3 #8 w/GND 236 654 81 3P 220 50 YES 1.00 3 #8 w/GND 236 684 81 3P 220 50 YES 1.00 6-90 ° #10 w/GND 236 674 81 3P 230 60 YES 1.15 3 #8 w/GND 236 604 81 YES 3P 230 60 YES 1.15 6-90 ° #10 w/GND 236 724 81 YES 3P 380 60 YES 1.15 3 #10 w/GND 236 664 81 3P 380 60 YES 1.15 6-90 ° #10 w/GND 236 784 81 3P 415 50 YES 1.00 3 #10 w/GND 236 694 81 3P 460/380-415 60/50 YES 1.15/1.00 3 #10 w/GND 236 614 81 3P 460/380-415 60/50 YES 1.15/1.00 6-90 ° #10 w/GND 236 714 81 3P 575 60 YES 1.15 3 #10 w/GND 236 624 81 3P 200-208 60 YES 1.15 3 #8 w/GND 236 654 40 3P 220 50 YES 1.00 3 #8 w/GND 236 684 40 3P 220 50 YES 1.00 6-90 ° #10 w/GND 236 674 40 3P 230 60 YES 1.15 3 #8 w/GND 236 604 40 3P 230 60 YES 1.15 6-90 ° #10 w/GND 236 724 40 3P 380 60 YES 1.15 3 #10 w/GND 236 664 40 3P 380 60 YES 1.15 6-90 ° #10 w/GND 236 784 40 3P 415 50 YES 1.00 3 #10 w/GND 236 694 40 3P 460/380-415 60/50 YES 1.15/1.00 3 #10 w/GND 236 614 40 3P 460/380-415 60/50 YES 1.15/1.00 6-90 ° #10 w/GND 236 714 40 3P 575 60 YES 1.15 3 #10 w/GND 236 624 40 YES YES YES YES YES 101 00 3 #10 w/GND 236 615 40 3P 460/380-415 60/50 YES 1.00 6-90 ° #10 w/GND 236 715 40 3P 575 60 YES 1.15 3 #10 w/GND 236 625 40 YES YES YES YES .15 3 #8 w/GND 236 605 40 3P 230 60 YES 1.15 3 #8 w/GND 236 655 40 3P 220 50 YES 1.15 3 #10 w/GND 236 665 90 3P 380 60 Not Available 1.15 3 #10 w/GND 3P 200-208 60 YES 1.00 3 #8 w/GND 236 685 90 3P 220 50 Not Available 1.00 3 #10 w/GND 236 615 81 3P 460/380-415 60/50 YES 1.15 6-90 ° #10 w/GND 236 785 81 3P 415 50 YES 1.00 3 #8 w/GND 236 685 40 3P 220 50 YES 1.15 3 #8 w/GND 236 605 81 YES 3P 230 60 YES 1.00 6-90 ° #10 w/GND 236 715 90 YES 236 625 90 3P 575 60 Not Available 1.00 3 #10 w/GND 236 695 81 3P 460/380-415 60/50 YES 1.00 3 #10 w/GND 236 615 90 YES 3P 460/380-415 60/50 Not Available 1.00 3 #10 w/GND 236 695 40 3P 460/380-415 60/50 YES 1.15 6-90 ° #10 w/GND 236 725 90 3P 380 60 Not Available 1.F.15 3 #10 w/GND 236 665 81 3P 380 60 YES 1.15/1.15/1.15 3 #8 w/GND 236 605 90 3P 230 60 Not Available 1. DRIVES AND CONTROLS 6" Submersible Motors Standard Models Description HP (KW) Construction WATER WELL 25 hp SAND FIGHTER 18. # Leads Wire Size (AWG) Model Stock Status YES HZ Subtrol Heat Sensor 200-208 60 Not Available 1.00 3 #8 w/GND 236 685 81 3P 220 50 YES 1.15 3 #8 w/GND 236 655 90 220 50 Not Available 1.00 6-90° #10 w/GND 236 675 40 3P 230 60 YES 1.00 6-90 ° #10 w/GND 236 675 81 3P 230 60 YES 1.5 kW 316 SS 102 S.00 6-90 ° #10 w/GND 236 675 90 3P 230 60 Not Available 1.MOTORS.15/1.15 3 #10 w/GND 236 625 81 3P 200-208 60 YES 1.15 6-90 ° #10 w/GND 236 725 81 YES 3P 380 60 YES 1.15 3 #10 w/GND 236 665 40 3P 380 60 YES 1.00 6-90 ° #10 w/GND 236 715 81 3P 575 60 YES 1.15/1.00 236 695 90 PH Volts 3P 3P YES YES 3P 415 50 3 #10 w/GND 3P 460/380-415 60/50 Not Available 1.15 3 #8 w/GND 236 655 81 3P 220 50 YES 1.15 6-90 ° #10 w/GND 236 785 40 3P 415 50 YES 1.15/1.15 6-90 ° #10 w/GND 236 785 90 Not Available 1.15 6-90 ° #10 w/GND 236 725 40 3P 380 60 YES 1.15/1. 15 6-90 ° #10 w/GND 236 726 81 YES 3P 380 60 YES 1.00 6-90 ° #10 w/GND 236 716 40 3P 575 60 YES 1.15/1.15 3 #10 w/GND 236 626 40 YES YES YES YES 103 .00 6-90 ° #10 w/GND 236 716 81 3P 575 60 YES 1. DRIVES AND CONTROLS 6" Submersible Motors Standard Models HP (KW) Construction WATER WELL 30 hp 22 kW SAND FIGHTER 316 SS HZ Description Subtrol Heat S.00 3 #10 w/GND 236 696 81 3P 460/380-415 60/50 YES 1.15/1.15/1.15 3 #10 w/GND 236 666 81 3P 380 60 YES 1.15 6-90 ° #10 w/GND 236 726 40 3P 380 60 YES 1.15 3 #10 w/GND 236 626 81 3P 200-208 60 YES 1.00 3 3P 220 50 Not Available 1.00 6-90 ° #10 w/GND 236 676 90 3P 230 60 Not Available 1.00 6-90 ° #10 w/GND 236 716 90 YES 236 626 90 3P 575 60 Not Available 1.15 6-90 ° #10 w/GND 236 726 90 3P 380 60 Not Available 1.15/1. Sensor Model Stock Status #8 w/GND 236 656 90 YES #8 w/GND 236 686 90 # Wire Size Leads (AWG) PH Volts 3P 200-208 60 Not Available 1.15 3 #10 w/GND 236 666 90 3P 380 60 Not Available 1.15/1.15 3 #8 w/GND 236 656 40 3P 220 50 YES 1.15 3 #10 w/GND 3P 200-208 60 YES 1.00 6-90 ° #10 w/GND 236 676 40 3P 230 60 YES 1.00 3 #8 w/GND 236 686 81 3P 220 50 YES 1.15/1.00 3 #8 w/GND 236 686 40 3P 220 50 YES 1.00 3 #10 w/GND 236 696 40 3P 460/380-415 60/50 YES 1.15 3 #10 w/GND 236 666 40 3P 380 60 YES 1.15 6-90 ° #10 w/GND 236 786 40 3P 415 50 YES 1.00 6-90 ° #10 w/GND 236 676 81 3P 230 60 YES 1.F.15 6-90 ° #10 w/GND 236 786 90 236 696 90 YES YES 3P 415 50 Not Available 1.15 6-90 ° #10 w/GND 236 786 81 3P 415 50 YES 1.15 3 #8 w/GND 236 656 81 3P 220 50 YES 1.00 3 #10 w/GND 236 616 40 3P 460/380-415 60/50 YES 1.00 3 #10 w/GND 236 616 81 3P 460/380-415 60/50 YES 1.15 3 #8 w/GND 236 606 90 3P 230 60 Not Available 1.00 3 #10 w/GND 236 616 90 YES 3P 460/380-415 60/50 Not Available 1.15 3 #8 w/GND 236 606 81 YES 3P 230 60 YES 1.MOTORS.00 3 #10 w/GND 3P 460/380-415 60/50 Not Available 1.15 3 #8 w/GND 236 606 40 3P 230 60 YES 1.15 3 3P 220 50 Not Available 1. 15/1.15/1.15/1.15 1.15/1.15 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 #8 w/GND #10 w/GND #8 w/GND #8 w/GND #10 w/GND #8 w/GND #8 w/GND #10 w/GND #8 w/GND #8 w/GND #10 w/GND #8 w/GND #8 w/GND #10 w/GND #8 w/GND #8 w/GND #10 w/GND #8 w/GND 236 667 90 236 787 90 236 697 90 236 617 90 236 717 90 236 627 90 236 667 81 236 787 81 236 697 81 236 617 81 236 717 81 236 627 81 236 667 40 236 787 40 236 697 40 236 617 40 236 717 40 236 627 40 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 380 380 415 460/380-415 460/380-415 575 380 380 415 460/380-415 460/380-415 575 60 60 50 60/50 60/50 60 60 60 50 60/50 60/50 60 YES YES YES YES YES YES YES YES YES YES YES YES 1.00 1.00 1.15/1.15 1.15/1.15 1.15/1.00 1.15/1.15/1.00 1.15 1.00 1.00 1.00 1.00 1.00 1.15 1.F.00 1.00 1.15/1.MOTORS.15 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND 276 668 60 276 788 60 276 698 60 276 618 60 276 718 60 276 628 60 276 668 40 276 788 40 276 698 40 276 618 40 276 718 40 276 628 40 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 380 380 415 460/380-415 460/380-415 575 380 380 415 460/380-415 460/380-415 575 60 60 50 60/50 60/50 60 60 60 50 60/50 60/50 60 YES YES YES YES YES YES YES YES YES YES YES YES 1. Sensor Model Volts HZ 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P 380 380 415 460/380-415 460/380-415 575 380 380 415 460/380-415 460/380-415 575 380 380 415 460/380-415 460/380-415 575 60 60 50 60/50 60/50 60 60 60 50 60/50 60/50 60 60 60 50 60/50 60/50 60 Not Available Not Available Not Available Not Available Not Available Not Available YES YES YES YES YES YES YES YES YES YES YES YES 1.00 1. 2. 104 # Wire Size Leads (AWG) PH Stock Status YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES .15 1.15 1.15 1.15 1. All models listed above include factory-installed leads (13 ft).15 1. 3. Models designated above as Sand Fighter™ are water well construction.15 1.00 1.00 1. DRIVES AND CONTROLS 6" Submersible Motors Standard Models HP (KW) Construction WATER WELL 40 hp 30 kW SAND FIGHTER 316 SS WATER WELL WITH SAND FIGHTER SEAL 50 hp 30 kW 316 SS WATER WELL WITH SAND FIGHTER SEAL 60 hp 45 kW 316 SS Description Subtrol Heat S.15 1.00 1.00 1.00 1.15/1.15 1.15 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 3 6-90 ° 3 #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND #8 w/GND 276 669 60 276 789 60 276 699 60 276 619 60 276 719 60 276 629 60 276 669 40 276 789 40 276 699 40 276 619 40 276 719 40 276 629 40 1.00 1.15/1.15 1.00 1. All 316 SS and Ni-Resist models are equipped with Sand Fighter sealing system.15/1.15/1.15 1.15 1.15 1.00 1.15 1.00 1. 15 5 .7 .5 ft/sec fl ow past motor Continuous at 0. DRIVES AND CONTROLS 6" Submersible Motors Standard Models Standard 6" Motor Specifications HZ PH HP Range kW Range Poles RPM Max. Ambient Temp.11 2 2 3450 2875 86 °F/30 °C 86 °F/30 °C Continuous at 0.MOTORS.7 . 105 . Viton ® is a registered trademark of DuPont Dow Elastomers.15 3.5 ft/sec fl ow past motor 6" Construction Materials Construction Type Component Standard Water Well Sand Fighter™ Corrosion Resistant (316 SS) UL Insulation Class Rating Motor Ambient Temperature Rating Class F 86 °F/30 °C (5-40 hp) 122 °F/50 °C (50-60 hp) FE Standard (5-40 hp) FE Hi-Temp (50-60 hp) Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well FES91 Per Standard Water Well Per Standard Water Well Epoxy Coated Gray Iron No (5-40 hp) Yes (50-60 hp) 300 SS Series Carbon Steel 300 SS Series (5-30 hp) 17-4 SS (40-60 hp) Bronze 300 SS Series Carbon Ceramic Seal (5-40 hp) Sand Fighter™ Seal System (50-60 hp) Nitrile (5-40 hp) Viton ® (50-60 hp) Nitrile (5-40 hp) Viton ® (50-60 hp) 300 SS Series 300 SS Series Nitrile (5-40 hp) Viton ® (50-60 hp) XLPE Epoxy Brass 3500 lbs (5-30 hp) 6000 lbs (40-60 hp) Ground Wire In Power Lead Connector Per Standard Water Well 316 SS Yes Yes Per Standard Water Well Per Standard Water Well 316 SS 316 SS Per Standard Water Well 17-4 SS Per Standard Water Well Per Standard Water Well 316 SS 316 SS Sand Fighter Seal System Sand Fighter Seal System Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well 316 SS 25-6 MO SS Per Standard Water Well Nitrile Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well 316 SS Per Standard Water Well Per Standard Water Well Per Standard Water Well Per Standard Water Well Stator Resin Type Motor Fill Solution (Water Soluble/Non-Toxic) Top End Bell & Thrust Housing On Winding SubTrol™ heat sensor Stator Shell Stator Ends Shaft Extension Bushing Bushing Retainer Shaft Mechanical Seal Mechanical Seal Rubber Components Diaphragm Material Diaphragm Plate Diaphragm Spring Shaft Slinger Lead Wire Lead Potting Lead Jam Nut Thrust Bearing Rating (86 °F/30 °C) Method Of Connecting System Ground To Motor Specifications subject to change without notice. Contact Franklin Electric if current material types are required for bid specifications. Duty Rating 60 50 1 1 5 .11 3. Contact Franklin Electric if current material types are required for bid specifications.7-22 kW FT M Wire Size (AWG) Brass 13 4 #8 3 w/GND 152 671 901 305 517 901 Brass 26 8 #8 3 w/GND 152 671 902 305 517 902 316 SS 13 4 #8 3 w/GND 152 671 951 305 517 951 316 SS 26 8 #8 3 w/GND 152 671 952 305 517 952 316 SS 50 15 #10 3 w/GND 152 672 955 305 518 955 316 SS 75 23 #10 3 w/GND 152 672 957 305 518 957 316 SS 100 30 #10 3 w/GND 152 672 960 305 518 960 316 SS 125 38 #10 3 w/GND 152 672 962 305 518 962 316 SS 150 45 #10 3 w/GND 152 672 965 305 518 965 316 SS 50 15 #8 3 w/GND 152 671 955 305 517 955 316 SS 75 23 #8 3 w/GND 152 671 957 305 517 957 316 SS 100 30 #8 3 w/GND 152 671 960 305 517 960 316 SS 125 38 #8 3 w/GND 152 671 962 305 517 962 316 SS 150 45 #8 3 w/GND 152 671 965 305 517 965 Jam Nut Material Lead Length Power Wires FE Part Number Replacement Kit Number Notes: 1. 106 . abrasion. 2. Consult factory for price and availability. and oxidizing chemicals. 4. Special-cut lengths may be available at an additional charge.MOTORS. Replacement leads are available in 25 ft. Refer to Franklin Application Installation Maintenance (AIM) Manual for accurate cable sizing. Fits FE Motor Rating All 6" Ratings 5-30 hp 3. increments up to 150 ft. 3. Standard XLPE 125 °C Lead Excellent resistance to ozone. Nitrile cable uses lead sleeve 1” longer than standard. MOTOR WARRANTY IS VOID if Franklin-supplied leads are not used. heat. DRIVES AND CONTROLS 6” Submersible Motors Leads 374 bushing with raised circular sealing tab Sleeve with tape 3 power conductors or 3 power conductors with ground 6" Lead Construction Material Component Material Wire Sleeve Potting Jam Nut XLPE 125 °C Brass or 316 SS Epoxy Brass or 316 SS Specifications subject to change without notice. 75 .0.7 NEMA 3R.MOTORS.25 . IP23 5 AWG 10 No Standard (S) 60 1 .1 0.15 1.11 NEMA 3R.1 0. eliminating the need for external line contactors.0. STANDARD & DELUXE – These control boxes are designed for use with Franklin 3-wire single-phase submersible motors from 1 through 15 hp. Deluxe boxes (only) contain magnetic line contactors carefully matched to the motor rating. DRIVES AND CONTROLS Submersible Motor Control Boxes QD.75 .1 0.3. IP23 5 AWG 2 No CSA Certified Deluxe (D) 60 2 .5 . IP23 5 AWG 10 No UL listed for US and Canada Quick Disconnect (QD) 50 1/3 .5 0.5 NEMA 3R. IP23 5 AWG 2 No Standard (S) 50 1. or other pilot devices. Standard and Deluxe Control Boxes Applications: QUICK DISCONNECT (QD) & CAPACITOR RUN CONTROL (CRC) – These control boxes are designed for use with Franklin 3-wire single-phase submersible motors through 1 hp.75 NEMA 3R.7.0.75 NEMA 3R.10 0.25 .37 . IP23 5 AWG 00 Yes UL listed for US and Canada UL listed for US and Canada UL listed for US and Canada 107 . IP23 6 AWG 2 Yes UL listed for US and Canada Extra Large Deluxe (D-XL) 60 15 11 NEMA 3R. IP23 5 AWG 10 No CSA Certified Capacitor Run Control (CRC) 60 1/2 .5 .75 NEMA 3R. Recommended for water systems that use pressure switches. level switches. Basic Features – Standard & Deluxe Boxes Basic Features – All Boxes Suitable for outdoor mounting ■ Heavy duty box-type terminals accept up to AWG #2 wire ■ Capacitor Start / Capacitor Run design (except QD boxes) ■ External access to overload resets ■ Multiple-size knockouts ■ UL Listed for US and Canada (60 Hz models) ■ User-friendly connection diagrams ■ Easy access to grounding lugs ■ Single-Phase Control Box Specifications Box Type HP KW HZ Range Range Terminal Block Enclosure Terminals Max Wire Mag Contactor Agency Approvals Quick Disconnect (QD) 60 1/3 . 5 kW) 1P 230 60 S 282 201 9210 YES 1P 230 60 D 282 201 9310 YES 10 hp (7.5 hp (1.1 kW) 2 hp (1.37 kW) 1 ⁄4 hp (0.75 kW) 1.2 kW) 5 hp (3.5 kW) 3 hp (2.5 hp (5.MOTORS.7 kW) Q = Quick Disconnect Control Box CRC = Capacitor Run Control Box S = Standard Control Box D = Deluxe Control Box D-XL = Extra Large Deluxe Control Box 108 .55 kW) 3 1 hp (0.25 kW) Description PH Volts HZ Type Model Stock Status YES 1P 115 60 Q 280 102 4915 1P 220 50 Q 280 353 0115 1P 230 60 Q 280 103 4915 YES 1P 115 60 Q 280 104 4915 YES 1P 220 50 Q 280 355 0115 YES 1P 230 60 Q 280 105 4915 YES 1P 230 60 CRC 282 405 5015 YES 1P 220 50 Q 280 357 0115 YES 1P 230 60 Q 280 107 4915 YES 1P 230 60 CRC 282 407 5015 YES 1P 220 50 Q 280 358 0115 YES 1P 230 60 Q 280 108 4915 YES 1P 230 60 CRC 282 408 5015 YES 1P 220 50 S 282 350 8110 YES 1P 230 60 S 282 300 8110 YES 1P 220 50 S 282 351 8110 YES 1P 230 60 S 282 301 8110 YES 1P 230 60 D 282 301 8310 YES 1P 220 50 S 282 352 8110 YES 1P 230 60 S 282 302 8110 YES 1P 230 60 D 282 302 8310 YES 1P 220 50 S 282 253 9010 YES 1P 230 60 S 282 113 8110 YES 1P 230 60 D 282 113 9310 YES 7.5 kW) 1P 230 60 S 282 202 9230 YES 1P 230 60 D 282 202 9330 YES 15 hp (11 kW) 1P 230 60 D 282 203 9330 YES 1P 230 60 D-XL 282 203 9621 /2 hp (0. Standard & Deluxe Control Boxes HP (KW) 1 ⁄3 hp (0. DRIVES AND CONTROLS Submersible Motor Control Boxes QD. Push button Snap Shot™ calibration makes Pumptec-Plus simple to install and an effective troubleshooting tool.MOTORS. Pumptec interrupts power to the motor whenever the load drops quickly or below a preset level. 3-wire motor when related fault conditions are detected. and abnormal line voltage conditions. QD Pumptec is designed to easily plug into any Franklin QD Relay Control Box. Pumptec IR Pumptec is a microcomputer-based device that monitors motor load and power line conditions to provide protection against dry well conditions. QD Pumptec easily plugs into 3-wire Franklin QD Control Boxes with no additional wiring or tools required. DRIVES AND CONTROLS Submersible Motor Protection Pumptec Family Pumptec Single-Phase Protection Devices Applications These protection devices are designed to protect Franklin Electric single-phase motors from the various conditions listed below. QD Pumptec Pumptec IR Pumptec-Plus ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rapid Cycling ■ ■ Water Logged Tank ■ ■ ■ ■ Air or Gas Locked Pump (Cavitation) Broken Shaft or Coupling Clogged Well Screen Drop in Water Level Faulty Check Valve High Voltage Low Voltage Low Yield Wells Worn Pump Parts ■ ■ ■ ■ QD Pumptec Exclusively designed for Franklin QD Relay Control Boxes. Pumptec-Plus The Pumptec-Plus solid state pump protection system is designed for 1/2 to 5 hp single-phase submersible pump motors. Indicator lights provide complete system status. Pumptec-Plus protects against a variety of fault conditions. waterlogged tanks. QD Pumptec is a solid state sensing device that monitors motor load and incoming power to automatically shut off a Franklin single-phase. Run and fault lights make diagnosis quick and easy. 109 . 99" 2.84" 3.5.25 QD Pumptec <1 <0.25 Pumptec IR Front 2.1.25 x 8.5.25 .0 0.5.7 220 50 Adjustable (1-240 Minutes or Manual) UL/cUL Listed QD Pumptec 1/3 .37 .0.MOTORS.1 8.25 Pumptec-Plus 7 3.25 x 2.50" (H) 8.5 0.25 .375 x 2.3.1.3.0 0.7 230 60 Adjustable (1-240 Minutes or Manual) UL/cUL Listed Pumptec-Plus 1/2 .31" Side 5.25 x 6.0 230 60 580 007 0600 YES QD Pumptec Single-Phase Protection Devices Shipping Weight Product Pumptec W/IR Control LBS KG Motor Carton Size (in inches) 3 1.84" 110 Side 9.60" Pumptec-Plus 1.875 x 3.81" Side 10.1.25 x 11.3 5.1 115/230 60/50 Adjustable (2-120 Minutes) UL/cUL Listed Pumptec-Plus 1/2 .03" 1.06" 8.37 . DRIVES AND CONTROLS Submersible Motor Protection Pumptec Family Single-Phase Electronic Protection Device Specifications HP Range KW Range Volts HZ Reset Time Agency Approvals Pumptec w/IR Control 1/3 .0 230 60 580 006 0100 YES 1P 1/2 .29" .75 230 60 Adjustable (2-240 Minutes) UL/cUL Listed Product Models Description Product Pumptec w/IR Control Pumptec-Plus QD Pumptec Model Stock Status PH HP Volts HZ 1P 1/3 .05 4.0 0.0 220 50 580 006 0500 YES 1P 1/3 .1.1.19" (W) 4.41" (D) 2.5.5 115/230 60/50 580 002 0600 YES 1P 1/2 . MOTORS. so there’s no need to spend time wrestling with wires. With a Franklin three-phase control panel. 111 . Drives & Controls Catalog. DRIVES AND CONTROLS Submersible Motor Protection Three-Phase Control Panel Three-Phase Panel Applications Franklin’s heavy duty three-phase panels are optimized for water and irrigation applications. you can be sure that your system is set-up according to Franklin’s recommendations. Franklin Electric three-phase control panels are available from 3 to 200 hp. in ratings from 200 to 575 Volts. and adding components is easy. Basic Features ■ UL approved. see the Franklin Electric Motors. The spacious layout makes installation and maintenance simple and easy. heavy-duty NEMA 3R enclosure ■ Class R fusible disconnect ■ Service entrance rated ■ Lightning arrestor ■ Motor logic or Franklin SubMonitor protected ■ NEMA contactor ■ Door wind hinge ■ Pilot device and alarm terminal block ■ H-O-A switch ■ Manual push-to-start switch ■ Easy hook-up Notes: For three-phase panel accessories. MOTORS. DRIVES AND CONTROLS Submersible Motor Protection Three-Phase Control Panel HP Description Volts MOTOR LOGIC 3 SUBMONITOR MOTOR LOGIC 5 SUBMONITOR MOTOR LOGIC 7.5 SUBMONITOR MOTOR LOGIC 10 SUBMONITOR MOTOR LOGIC 15 SUBMONITOR MOTOR LOGIC 20 SUBMONITOR Model WT 200 HZ Amps 60 6-18 281 101 2203 56 230 60 6-18 281 101 3303 56 460 60 3-9 281 101 4402 56 575 60 3-9 281 101 5502 56 200 60 ALL 281 101 2200 59 230 60 ALL 281 101 3300 59 460 60 ALL 281 101 4400 59 575 60 ALL 281 101 5500 200 60 9-27 230 60 460 60 HP MOTOR LOGIC 25 Model WT 200 HZ Amps 60 30-90 281 206 2208 145 230 60 30-90 281 206 3308 145 460 60 15-45 281 104 4406 60 575 60 15-45 281 104 5506 60 200 60 ALL 281 206 2200 148 230 60 ALL 281 206 3300 148 460 60 ALL 281 104 4400 63 59 575 60 ALL 281 104 5500 63 281 101 2204 56 200 60 45-135 281 207 2209 147 9-27 281 104 3304 56 230 60 45-135 281 207 3309 147 3-9 281 101 4402 56 460 60 30-90 281 104 4407 145 575 60 3-9 281 101 5502 56 200 60 ALL 281 101 2200 59 230 60 ALL 281 101 3300 59 460 60 ALL 281 101 4400 59 575 60 ALL 281 101 5500 59 200 60 15-45 281 104 2206 60 230 60 15-45 281 104 3306 60 460 60 6-18 281 101 4403 56 575 60 6-18 281 101 5503 56 200 60 ALL 281 104 2200 63 230 60 ALL 281 104 3300 63 460 60 ALL 281 101 4400 59 575 60 ALL 281 101 5500 59 200 60 15-45 281 104 2206 60 230 60 15-45 281 104 3306 60 460 60 9-27 281 101 4404 56 575 60 6-18 281 101 5503 56 200 60 ALL 281 104 2200 63 230 60 ALL 281 104 3300 63 460 60 ALL 281 101 4400 59 575 60 ALL 281 101 5500 59 200 60 45-135 281 204 2208 147 230 60 30-90 281 204 3308 145 460 60 15-45 281 104 4406 60 575 60 15-45 281 104 5506 60 200 60 ALL 281 204 2200 150 230 60 ALL 281 204 3300 148 460 60 ALL 281 103 4400 63 575 60 ALL 281 104 5500 59 200 60 30-90 281 205 2208 145 230 60 30-90 281 205 3308 145 460 60 15-45 281 104 4406 60 575 60 15-45 281 104 5506 60 200 60 ALL 281 205 2200 148 230 60 ALL 281 205 3300 148 460 60 ALL 281 103 4400 63 575 60 ALL 281 104 5500 59 SUBMONITOR MOTOR LOGIC 575 60 30-90 281 204 5507 145 200 60 ALL 281 207 2200 151 SUBMONITOR 230 60 ALL 281 207 3300 151 460 60 ALL 281 106 4400 148 575 60 ALL 281 204 5500 148 MOTOR LOGIC 460 60 30-90 281 205 4408 145 575 60 30-90 281 204 5507 145 SUBMONITOR 460 60 ALL 281 205 4400 148 575 60 ALL 281 204 5500 148 MOTOR LOGIC 460 60 30-90 281 206 4408 145 575 60 30-90 281 205 5508 145 SUBMONITOR 460 60 ALL 281 206 4400 148 30 40 50 60 75 100 125 150 175 200 112 Description Volts 575 60 ALL 281 205 5500 148 460 60 45-135 281 207 4409 147 575 60 45-135 281 307 5510 147 SUBMONITOR 460 60 ALL 281 207 4400 150 575 60 ALL 281 307 5500 150 MOTOR LOGIC 460 60 45-135 281 207 4409 147 575 60 45-135 281 307 5510 147 SUBMONITOR 460 60 ALL 281 207 4400 150 575 60 ALL 281 307 5500 150 MOTOR LOGIC 460 60 90-270 281 308 4411 390 575 60 45-135 281 307 5510 147 SUBMONITOR 460 60 ALL 281 308 4400 393 575 60 ALL 281 307 5500 150 MOTOR LOGIC 460 60 90-270 281 309 4411 390 575 60 90-270 281 309 5511 390 SUBMONITOR 460 60 ALL 281 309 4400 393 575 60 ALL 281 309 5500 393 MOTOR LOGIC 460 60 90-270 281 310 4412 390 575 60 90-270 281 309 5511 390 SUBMONITOR 460 60 ALL 281 310 4400 393 575 60 ALL 281 309 5500 393 MOTOR LOGIC 460 60 90-270 2813104412 390 575 60 90-270 2813105512 390 SUBMONITOR 460 60 ALL 2813104400 393 575 60 ALL 2813105500 393 MOTOR LOGIC 460 60 18-540 2813114413 660 575 60 90-270 2813105512 390 SUBMONITOR 460 60 ALL 2813114400 663 575 60 ALL 2813105500 393 MOTOR LOGIC . .. 3 seconds Control Circuit Rating ............. 4......................75 in x 11... and pump run-time information easily accessed through display head ■ Detachable NEMA 3R display unit easily mounted on panel door ■ Fault messages in easily understandable text ■ Rated for 190 to 600 Volts ■ Turn-and-push adjustment knob ■ No need for additional turns around the CT or to add external CTs ■ Base unit can operate independent of detachable head ■ Password protection option ■ UL and cUL listed ■ DIN rail mounting option Three-Phase Electronic Protection Device Specifications Input Voltage .1...920 in....................... Under/Overvoltage.............5 lbs/1...........Three-Phase Motor Protection Applications SubMonitor is designed to protect three-phase pumps by monitoring current........... #12 to #18 AWG Tighten to ............ Protects Against ■ Under/Overload ■ Under/Overvoltage ■ Current Unbalance ■ Overheated Motor (Subtrol-equipped) ■ False Start (Chattering) ■ Phase Reversal Features ■ Quick.....................5 in-lbs Weight (SubMonitor)... 60/50 Hz Motor Service Factor Amps....75 in (19... (23 mm) Trip Response Motor Under/Overload.....1 Amp AC.2 cm x 17........................ voltage and motor temperature* using three integrated current transformers...5 kg Agency Approval ......... up to 600V Signal Circuit Rating ..........................................7 cm x 29.. DRIVES AND CONTROLS Submersible Motor Protection SubMonitor ......... UL and cUL listed * For motors equipped with a Subtrol heat sensor 113 .. 5 to 350 Amps Maximum Conductor Size Through Sensors Max Diameter ............................5 Amp AC..5 kg Carton Size (Std....... Unbalance . up to 250V Wiring Terminals Wire Gauge ...... Unit) ......................... setting changes............. 190 – 600 VAC Frequency .. 3. Unit) .3 lbs/1...MOTORS....1 cm) Shipping Weight (Std... Overheat..... A face mounted digital display provides real-time current and voltage readings for all three legs and allows the user to set up the SubMonitor quickly and easily............ 3.5 in x 6.. menu-driven set-up ■ ■ Digital display shows voltage and current on all three legs at once Stored fault... 0..7... 3” 7” 8” 8” Display ■ Real-time display of voltage and current for each leg. DRIVES AND CONTROLS Submersible Motor Protection Three-Phase Control Panel .Accessories Models Dimensions and Weights Product Description Max Amps PH Volts Range HZ Model Stock Status SubMonitor Standard 3 5 .MOTORS. ■ Easy menu-driven setup and adjustment of monitoring parameters.35” 5.7” 3” 4” 4. SubMonitor Acces Accessory D3 Data Download Tool D3 is a service tool that provides the capability to download data from SubMonitor and transfer that data to a PC.3 1.350 190 .5 x 6.600 60/50 586 000 5100 YES Display Only N/A N/A N/A N/A 225 190 902 YES Base Only N/A N/A N/A N/A 225 210 902 YES Shipping Weight LBS KG 3.75 x 11.600 60/50 586 000 5000 YES SubMonitor Premium* 3 5 .75 * Includes lightning arrestor and 3-year warranty on SubMonitor and Subtrol-equipped motor Front Base Unit Top Base Unit Detachable Display Unit 5.5 Motor Carton Size (in inches) 7.350 190 . Includes: D3 unit ■ 585 001 1100 114 ■ Transfer software ■ USB cable . MOTORS.All Controllers ■ Constant water pressure with a wide range of settings (25 to 80 psi) ■ NEMA 4 (Outdoor) and NEMA 1 (Indoor) Enclosures ■ Easy installation ■ Soft start feature prevents water hammer and increases motor life ■ Works with small pressure tanks or existing larger tanks ■ Smart Reset ® technology allows well recovery before restarting the pump ■ Single-phase input power with three-phase motor performance (SubDrive models) ■ Excellent radio frequency interference shielding ■ UL and cUL listed ■ Built-in Diagnostics and Protection ● ● ● ● ● ● ● Surge protection Underload Undervoltage Locked pump Open circuit Short circuit Overheated controller 115 . Features . DRIVES AND CONTROLS Constant Pressure Drives SubDrive/MonoDrive Applications Franklin Electric’s constant pressure controllers use state-of-the-art technology to provide constant water pressure through variable speed control of submersible water well pumps. 84 Weight (N4) 24.5 x 36.95 kg) 28.7 A (¾ hp).5 hp (Selectable) 1.5 hp). (N1) 587 020 3110 (Enclosure*) (N4) 587 020 3114 Input (From Power Source) 190-260 V Voltage 1-Phase Frequency 60/50 Hz 5.91 lbs 35.94 kg) 15. 230 VAC (3-Phase) 3 hp.32 lbs (12. ¾. (RMS) 9.80 kg) 17.5 or 2 hp (Selectable) 1. N4 = NEMA 4 (Outdoors) .9 cm Size 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 17 ⁄2 x 16 ⁄8 x 11 ⁄8” 17 ⁄2 x 16 ⁄8 x 11 ⁄8” 17 ⁄2 x 16 ⁄8 x 11 ⁄8” 17 ⁄2 x 16 ⁄8 x 11 ⁄8” 197 ⁄8 x 171 ⁄2 x 141 ⁄4” (H x W x D) (N4) 17 ⁄2 x 16 ⁄8 x 11 ⁄8” 44.0 A (½ hp).5 hp).15 lbs (15. 2 or 3 hp (Selectable) 3 or 5 hp (Selectable) 1. ¾ or 1 hp.6 x 28.14 lbs (10. 230 VAC (3-Phase) External External For Use With: Pump Rating Motor Rating ½.6 A (¾ hp).5 x 41. SubDrive150 and SubDrive300 ■ ■ ■ Works with a standard three-phase Franklin Electric submersible motor NEMA 4 & NEMA 1 enclosure Three-phase performance with single-phase input ● High starting torque ● More effi cient ● Smooth running Constant Pressure Controls Specifications MonoDrive Model No.9 A 8.5 x 41.5 x 44.4 x 22.9 cm 41.5 x 41.95 kg) kg) 161 ⁄2 x 12 3 ⁄8 x 9” 161 ⁄2 x 12 3 ⁄8 x 9” 161 ⁄2 x 12 3 ⁄8 x 9” 161 ⁄2 x 12 3 ⁄8 x 9” 17.9 cm 41.9 cm 50.0 A (1 hp) MonoDriveXT SubDrive75 SubDrive100 SubDrive150 SubDrive300 587 020 4110 587 020 4114 587 020 3380 587 020 3384 587 020 4100 587 020 4104 587 020 4150 587 020 4154 N/A 587 020 6300 190-260 V 1-Phase 60/50 Hz 190-260 V 1-Phase 60/50 Hz 190-260 V 1-Phase 60/50 Hz 190-260 V 1-Phase 60/50 Hz 60/50 Hz 13 A (1.28 lbs (9.8 A ¾.92 kg) (14.5 or 2 hp.5 or 2 hp (Selectable) 1.94 kg) Controller 28.72 kg) 21.4 x 22.80 kg) 17.6 x 28.84 35. 16 A (2 hp) 11 A 19 A 23 A 36 A 1 (Constant) 1 (Constant) 1 (Constant) 1 (Constant) 1 (Constant) 190-260 V 1-Phase Variable/1-Phase Variable/3-Phase Variable/3-Phase Variable/3-Phase Variable/3-Phase Variable Variable Variable Variable Variable (30-60 Hz) (30-80 Hz) (30-80 Hz) (30-80 Hz) (30-80 Hz) 10 A (1. (RMS) 11 A (1 hp) Power Factor 1 (Constant) Output (To Motor) Voltage Variable/1-Phase Variable Frequency (30-60 Hz) 4.9 cm 41. Max Amps 6.6 x 28. ¾ or 1 hp (Selectable) ½.94 kg) kg) 161 ⁄2 x 12 3 ⁄8 x 9” N/A (N1) Carton 41. Max Amps 8. 12 A (2 hp) 5.23 lbs (8.32 lbs (12.65 kg) 21.65 kg) N/A 30.MOTORS.9 x 31. 230 VAC (3-Phase) 5 hp.9 x 31.7 A (½ hp).14 lbs (10.95 lbs ( (N4) (14. 230 VAC (1-Phase) Pressure Sensor External External External External (Included) (N1) 15.72 kg) 21.84 kg) 24.9 x 31.00 lbs (6.6 x 28. MonoDriveXT (1.65 kg) 19. and 1 hp).9 cm 44. DRIVES AND CONTROLS Constant Pressure Drives SubDrive/MonoDrive Features — MonoDrive and MonoDriveXT ■ ■ ■ ■ ■ Selectable hp rating: MonoDrive (½. 1 or 1.09 lbs 40.6 x 28.02 kg) (15.9 cm 44.92 kg) (15.91 lbs 35.4 x 22.02 kg) (15.5 x 41.9 cm 44.4 x 22.09 lbs 30.00 lbs (6.5.50 lbs (7.23 lbs (8. 3-wire Features — SubDrive75. SubDrive100.92 kg) 18.2 cm Shipping Weight 116 (N1) 19.50 lbs (7.28 lbs (9.5 hp.50 lbs (7.28 lbs (9.32 lbs (12.9 x 31.9 x 31.09 lbs 35.9 cm 44. 230 VAC (3-Phase) 2 hp.4 x 22.5 and 2 hp) Easy installation – remove the 3-wire control box and install the MonoDrive Can retrofit existing systems – no need to pull the pump NEMA 4 & NEMA 1 enclosure Single-phase.9 A 17.1 A 10.94 kg) N/A 28. 230 VAC (1-Phase) 1. 1.57 kg) *N1 = NEMA 1 (Indoors).9 cm 41.5 x 41. 33 7.30 8./s) Loss (ft.73 0.37 4.25 5.34 0.44 6.73 1.03 0.01 1.91 5.43 2.74 0.13 4.23 0.06 4.71 4.56 0.76 12.80 4.51 0.04 3.26 3.23 2.06 0.34 62./s) Loss (ft./s) Loss (ft.25 0.21 5.45 11.01 26.80 0.36 14.53 2.01 0.33 0.33 12.49 6.00 1.95 2.21 7.57 4.78 0.74 2.01 0.40 3.65 5.43 9.11 0.09 1.54 7.81 58.26 1.07 1.68 0.84 0.91 3.50 7.46 4.16 8.05 0.16 6.07 1.15 20.20 0.01 1.44 2.04 0.59 2.83 5.14 8.64 13.25 15.50 0.48 6.68 16.36 1.12 0.48 2.38 0.98 0.73 7.36 4.93 7.77 0.17 1.42 8.68 0.72 6.74 4.51 19.68 0.18 2.06 0.99 58.64 2.12 14.17 0.21 1.86 109.12 2.23 2.39 0.01 1.71 14.68 25.21 13.75 0.74 14.76 0.03 0.52 3.98 42.63 3.89 4.03 19.03 0.96 2.92 12.54 0.65 3.42 1.76 22.59 1.50 4.82 1.12 0.59 13.28 0.43 19.38 1.70 5.83 1.83 29.15 18.35 7.45 9.68 8./s) Loss (ft.29 0.61 87.84 3.46 16.47 5.98 2.20 1.30 2.23 0.65 0.57 8.04 0.35 0.25 0.66 10.19 0.40 2.64 1.93 1.90 10.53 15.02 5.25 69.57 13.89 2.18 0.45 5.06 0.68 0.86 55.42 0.50 2.39 0.38 0.68 7.09 1./s) Loss (ft.57 29.72 4.02 0.28 0.78 5.87 13.05 0.27 0.34 36.52 3.61 0.27 1./s) 1.09 1.59 12.23 0.64 1.29 24.54 2.54 0.89 1.24 0.45 6.75 9.30 1.95 3.00 12.61 0.78 0.57 68.34 0.67 0.47 8.16 9.35 23.44 21.19 10.36 3.87 0.12 2.70 8.64 1.17 1.17 0.14 0.19 5.03 4.79 3.68 3.92 1.70 6" Pipe 0.44 0.79 51.55 16.23 0.19 4.38 0.50 0.36 0.26 1.53 0.04 0.45 0.40 3.88 2.08 5.06 1.08 0.54 2.28 2.59 10.81 1.94 6.84 0.78 2.49 4.22 0.67 0.29 66.02 0.24 0.00 0.97 3.63 1.01 0.07 7.26 0.09 6.28 0.03 0.86 35.12 3.87 0.14 0.87 6.03 0.36 11.92 0.14 16.82 2.00 0.81 5.24 7.51 9.32 6.74 1.50 5.30 0. 117 .03 0.45 6.09 2.08 0.67 1.23 2.04 0.24 11.40 1.13 2.59 0.71 4.78 6.01 0.36 1. Calculated using Williams and Hazen formula using C = 150.49 13.89 16.29 43.15 4.49 0.70 11.18 0.26 37.36 4.03 0.98 1.69 107./s) Loss (ft.85 2.20 4.98 1.60 12.09 1.27 2.27 11.05 1.45 0.35 6.39 11.50 1.75 1.05 0.15 1.51 0.00 6.16 0.97 3.23 0.00 2.52 4.33 0.13 5.REFERENCES Friction Loss PVC Schedule 80 IPS Plastic Pipe in Feet per 100 feet of pipe Pipe Size GPM 1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 26 28 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 125 150 175 1/2" 3/4" 1” 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel Loss (ft.54 2.60 0.04 0.14 0.18 15.76 0.72 5.12 8.29 8.72 12.37 2.08 49.13 0./s) Loss (ft.86 0.41 0.59 15.53 0.01 4.43 0.39 2.75 0.93 10.04 0.26 5.33 0.89 1.23 7.92 7.11 5.27 7.83 0.16 2.90 3.87 8.63 0.24 6.18 0.83 3.88 0.49 7.26 34.91 1.07 3.07 0.12 Notes: Suction Velocities should not exceed 8 feet per second.92 9.34 1.61 4.73 0.23 5.77 6.51 1.54 0.64 3.61 2.75 24.17 41.50 1.43 0.71 40.19 10.30 0.10 0.89 27.58 0.39 1.12 0.45 1.23 0.18 1.86 6.51 2.09 0.00 4.52 1.05 0.25 0.09 1.91 1.07 0.05 0.54 0.78 0.80 4.80 0.06 0./s) Loss (ft.10 0.88 17.94 0.05 0.89 1.31 17.28 3.37 2.07 0.62 10.89 31.62 0.27 3.27 132.80 35.67 0.81 10.53 1.97 1.21 1.07 2.99 4.81 10.81 50.69 71.67 1.20 0.32 18.02 0.00 3.82 1.00 2.72 31.08 1.14 11.16 0.74 1.85 10.82 13.22 9.88 3.50 0.01 0.52 51.45 1.17 2.11 0.82 1.70 1.80 2.55 7.63 41.11 0.40 0.25 0.97 2.44 0.66 0.33 13.50 0.76 8.85 8.67 2.62 45.74 14.96 12.31 88.41 1.20 1.06 9.15 0.08 0.48 0.89 7.16 3.43 56.50 0.46 1.61 4.30 4.85 9.52 0.22 0.03 8.97 2.65 2.85 0. 156 0.363 222.315 0.554 33.945 1.148 5.813 33.215 125.023 0.563 0.097 4.652 10.087 0.069 0.025 5.093 48.358 98.140 163.965 290.765 9.025 0.354 41.148 11.157 0.009 0.525 14.016 16.946 1.053 7.105 0.304 19.793 6.626 10.011 0.290 4.375 46.396 3.738 14.252 4.475 17.577 16.647 3.712 4.852 124.346 0.021 84.274 24.742 2.023 4.791 101.649 177.099 7.943 431.112 98.151 8.968 8.765 34.726 14.644 0.422 162.003 3.853 85.241 0.261 1.482 0.412 0.989 6.971 15.997 113.535 42.432 3.450 23.610 4.094 3.789 272.778 4.701 180.026 0.425 7.503 10.782 3.801 1.033 1.039 145.448 18.734 1.631 1.045 2.168 214.558 6.286 0.334 17.017 0.935 5.168 4.244 16.929 4.103 1.076 4.025 9.203 0.460 1.065 0.009 9.860 4.644 0.364 2.597 2.934 5.433 0.325 0.279 6.142 357.61 Vel Vel Vel Vel Vel Vel Vel Vel Vel Vel Friction Head Friction Head Friction Head Friction Head Friction Head (ft/sec) (ft/sec) (ft/sec) (ft/sec) (ft/sec) (ft) (ft) (ft) (ft) (ft) 2.681 0.885 30.281 0.817 149.735 101.049 10.889 0.395 0.003 0.255 4.099 209.577 5.128 255.543 3.487 22.487 3.364 14.852 759.880 8.234 1.874 79.685 .483 0.633 40.413 4.798 12.165 0.064 7.006 0.455 15.733 2.863 38.407 3.362 0.454 7.951 1.654 85.371 0.287 1.904 324.670 13.259 61.647 29.867 10.602 1.103 1.456 0.516 3.214 13.411 4.891 2.504 4.649 26.811 193.495 12.319 40.395 14.288 6.250 2.829 10.072 0.861 4.228 10.335 18.553 168.183 14.140 19.561 1.622 13.103 0.986 27.019 0.901 4.139 0.184 56.087 0.618 0.309 3.918 219.894 59.481 2.534 1.211 4.197 5.232 0.390 1.218 3.691 192.056 2.435 6.679 1.249 7.171 2.857 0.319 46.819 18.221 6.820 12.048 13.049 0.985 239. 118 0.828 7.158 0.276 0.281 9.090 0.360 2.170 0.043 0.595 25.041 15.019 0.789 3.628 25.639 0.381 8.619 6.467 3.266 1.283 44.001 0.476 2.701 24.410 35.REFERENCES Friction Loss Water in Feet per 100 feet of Steel Pipe GPM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 36 38 40 42 44 46 48 50 55 60 65 70 75 80 85 90 95 100 110 120 130 140 150 Pipe Size 1/2" Pipe Size 3/4" Pipe Size 1" Pipe Size 1-1/4" Pipe Size 1-1/2" Actual size 0.630 0.035 0.711 9.006 0.363 5.259 0.127 3.144 1.698 31.215 0.762 53.857 139.056 27.838 14.349 19.037 1.258 0.016 6.082 15.378 0.236 13.308 0.446 0.829 11.869 199.203 1.204 0.175 0.943 15.675 278.151 8.817 0.574 2.391 8.532 4.021 3.244 11.058 0.008 3.378 21.423 9.018 0.263 2.207 0.796 8.315 0.337 4.023 10.827 0.277 0.521 0.643 16.083 4.201 1.313 14.440 1.448 1.561 0.671 28.002 0.657 11.134 31.137 0.824 Actual size 1.021 0.006 0.568 5.550 7.112 0.489 11.479 7.433 103.093 3.975 167.887 73.193 2.298 12.679 2.261 37.145 2.107 14.909 9.296 10.214 0.592 16.039 0.681 0.233 19.837 2.831 0.970 3.826 5.031 0.728 5.495 2.792 6.404 0.121 0.788 2.331 21.417 22.173 0.258 9.086 14.500 0.976 3.191 113.159 12.097 2.962 10.339 1.789 3.355 6.671 5.856 2.548 0.615 12.559 11.719 4.429 0.003 0.607 13.869 18.332 0.374 2.732 0.587 14.890 145.267 37.109 1.167 5.521 2.580 9.091 3.181 10.418 1.280 178.849 15.076 17.740 27.303 0.054 0.380 409.151 3.183 0.561 129.304 6.259 275.030 32.028 20.788 0.564 7.769 70.189 9.123 0.889 24.538 8.032 11.846 17.063 0.000 0.517 112.142 36.352 57.843 123.673 5.090 0.738 137.141 0.220 7.076 0.803 4.360 0.039 0.383 50.263 207.805 2.842 29.305 20.453 20.271 5.168 150.622 Actual size 0.222 0.688 4.463 60.396 64.931 2.073 1.281 308.047 2.618 7.952 68.087 6.567 0.206 2.725 11.747 122.241 617.934 7.447 0.769 6.394 10.507 198.088 17.034 0.358 5.827 22.157 0.655 17.856 80.682 7.864 7.031 2.641 60.566 0.764 6.524 7.879 12.753 19.223 5.051 0.268 0.404 1.074 0.362 34.813 5.133 1.810 0.645 220.653 10.576 1.994 3.566 8.485 1.561 20.645 26.439 15.004 16.317 1.241 242.569 9.856 1.773 0.112 152.708 15.031 31.006 6.793 5.347 0.716 1.163 2.241 3.965 1.332 53.928 3.327 89.599 2.077 0.927 1.002 0.766 11.125 0.823 2.961 77.261 0.556 54.899 0.447 9.061 68.033 12.470 2.955 465.014 0.723 3.043 5.333 5.911 20.898 72.484 3.940 6.870 13.742 1.015 16.691 76.047 0.206 23.140 0.966 1.821 8.154 0.574 3.114 1.596 1.049 Actual size 1.130 25.147 375.846 Notes: Suction Velocities should not exceed 8 feet per second.557 0.420 231.420 0.928 2.570 4.160 18.112 3.577 5.722 8.731 5.200 1.419 0.840 262.376 316.261 1.137 11.634 13.082 21.782 15.652 0.056 0.891 2.502 1.027 552.335 7.754 0.442 182.249 490.311 6.849 1.873 28.384 1.099 0.227 2.293 7.619 0.559 6.161 0.624 0.431 12.169 12.438 9.152 3.776 3.858 1.759 17.187 0.167 8.147 4.190 834.388 7.38 Actual size 1.747 0.513 90.641 16.455 4.809 22.648 1.668 9.601 0.060 52.341 3.723 2.168 1.435 94.453 19.505 4.415 6.046 0.940 4.997 45.860 686.001 0.694 0.049 2.456 10.513 1.101 4.626 1.427 3.063 23.625 3.473 0.838 0. 067 0.251 0.183 0.321 0.131 8.331 3.080 0.724 2.012 0.018 0.367 22.015 0.020 0. 119 .083 2.861 0.260 0.067 Actual size 2.103 0.250 0.042 0.042 0.002 0.051 0.785 0.165 0.164 0.642 6.598 10.055 0.018 0.454 0.737 0.325 0.105 0.783 5.955 13.224 0.014 0.708 0.148 0.704 0.007 0.669 11.574 0.044 0.103 1.487 0.012 0.546 0.328 0.368 Notes: Suction Velocities should not exceed 8 feet per second.516 0.563 1.910 1.130 5.292 0.840 6.981 3.005 1.910 1.052 1.914 3.006 0.363 1.094 0.686 4.779 0.493 1.090 0.128 1.698 0.006 0.310 1.200 0.148 0.071 0.012 0.237 0.999 30.184 0.807 0.215 1.032 0.026 0.034 0.002 0.911 0.017 0.387 2.151 0.349 0.156 50.272 2.158 0.010 0.003 0.721 2.370 0.174 7.435 1.699 7.828 2.239 0.014 0.180 1.020 0.162 0.183 27.917 1.070 1.430 0.592 4.906 4.002 0.072 1.711 9.172 1.041 0.604 2.681 0.376 2.004 0.383 0.630 0.110 3.083 3.241 0.804 0.304 1.041 0.732 4.617 0.233 1.487 0.105 2.066 0.302 1.694 0.714 0.565 0.412 2.746 0.868 0.948 3.005 1.277 0.519 0.018 0.063 0.013 0.072 20.968 15.021 4.051 0.093 0.469 Actual size 3.296 0.357 0.001 0.947 2.236 0.393 0.148 1.391 2.016 0.477 0.317 7.103 0.015 0.811 0.562 1.024 0.422 0.785 1.248 1.402 0.038 1.447 0.416 65.941 0.368 1.738 0.599 0.200 2.421 1.574 0.021 0.009 2.264 0.244 1.821 3.005 0.001 1.955 2.736 1.904 0.217 3.104 0.025 2.224 0.252 3.182 0.081 0.800 0.099 4.578 9.009 0.210 0.175 6.229 0.603 0.208 5.644 1.082 0.304 0.609 9.112 0.301 0.908 8.680 2.789 36.278 2.720 0.121 0.478 0.101 0.004 0.400 4.042 1.327 8.001 0.017 0.422 1.504 0.205 0.212 0.731 7.206 1.201 0.853 0.722 1.548 Vel Vel Head Vel Vel Head Vel Vel Head Vel Vel Head Friction Friction Friction Friction (ft/sec) (ft) (ft/sec) (ft) (ft/sec) (ft) (ft/sec) (ft) 0.175 11.670 0.529 10.164 0.009 0.001 0.527 0.034 1.678 2.546 2.696 7.487 2.070 1.541 2.062 0.020 0.865 2.211 0.399 0.356 4.195 0.825 0.051 0.255 3.407 1.006 0.293 0.697 0.008 0.169 0.011 0.083 0.844 0.089 0.711 1.118 0.913 2.256 0.826 0.571 0.000 0.007 0.114 3.469 0.004 0.404 2.170 2.495 0.998 1.507 5.019 0.089 0.793 12.031 0.088 9.021 0.701 7.943 2.612 4.001 0.646 2.175 4.733 43.434 2.010 0.004 0.047 0.021 2.030 2.003 0.120 0.436 13.351 3.148 1.208 0.032 0.708 4.957 1.018 4.845 1.075 0.938 1.876 0.386 0.921 3.391 0.407 0.123 4.113 0.572 1.187 0.071 0.558 1.047 0.010 2.005 0.059 0.356 0.541 1.905 18.814 2.052 0.036 0.REFERENCES Friction Loss GPM 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 36 38 40 42 44 46 48 50 55 60 65 70 75 80 85 90 95 100 110 120 130 140 150 Pipe Size 2" Pipe Size 2-1/2" Pipe Size 3" Pipe Size 3-1/2" Actual size 2.001 0.659 0.696 6.626 1.001 0.923 0.026 0.295 0.689 3.144 4.826 4.031 0.691 5.171 0.168 1.765 0.025 0.135 0.038 0.026 5.038 3.029 0.809 1.007 0.218 0.069 0.446 0.009 0.259 1.434 0.124 0.635 3.168 0.601 2.040 0.996 2.570 3.058 0.395 1.781 0.751 0.020 0.608 0.123 0.069 0.542 0.057 0.021 0.017 0.139 1.059 0.028 1.335 0.823 1.007 0.273 0.550 0.287 0.308 7.044 0.033 0.371 8.433 0.002 0.146 0.096 0.985 1.002 0.261 5.871 0.273 1.474 1.356 0.047 0.427 0.123 0.596 2.870 3.008 0.063 0.073 0.035 0.105 0.476 1.444 3.085 1.616 0.014 0.286 0.061 3.002 0.974 1.134 0.472 3.611 0.531 1.865 15.566 10.109 2.128 0.051 0.227 0.245 3.075 0.001 0.485 0.486 0.428 1.076 0.002 0.041 8.653 8.003 0.023 0.392 14.510 0.377 6.298 1.312 3.651 3.909 0.835 3.339 1.740 6.001 0.008 0.001 0.340 0.340 1.209 4.536 0.003 0.335 0.174 0.001 0.470 1.455 0.033 0.078 3.034 0.679 0.658 0.026 0.405 9.570 0.112 0.028 0.025 0.222 2.009 0.050 0.601 0.143 0.523 11.649 0.479 0.552 0.052 0.013 0.592 4.876 1.219 4.135 0.022 0.012 0.024 0.023 0.063 0.296 2.083 3.217 0.955 0.177 21.251 0.030 0.076 6.742 1.543 4.198 0.787 25.734 0.346 0.354 0.025 0.037 0.157 1.007 0.868 0.004 0.818 1.152 1.389 1.651 0.321 0.227 1.342 0.608 1.301 0.675 1.081 24.490 1.612 8.003 0.435 0.268 0.161 2.009 0.584 0.788 3.363 2.057 0.336 3.284 1.031 6.372 0.028 0.144 2.012 0.340 4.607 0.286 5.774 2.472 18.286 1.995 1.512 0.260 0.158 1.068 Actual size 3.005 0.035 5.052 57.642 6.774 5.197 0.046 0.218 6.038 0.642 5.758 2.120 0.649 1.148 1.366 6.269 0.079 0.001 0.118 0.759 1.564 0.133 0.007 0.014 0.016 0.382 10.521 0.005 0.161 0.583 2.191 0.623 1.011 0.052 0.048 2.750 2.191 2.004 0.092 0.228 0.146 0.188 0.479 12.863 1.150 0.328 2.089 0.389 0.296 0.275 0.331 27.347 0.037 0.422 0.670 0.894 4.361 5. 8 4.47 0.6 2 2.5 4.8 9 11 14 17 19 22 24 27 33 Friction losses in terms of equivalent lengths of standard pipe Gate Valve Open Globe Valve Open Angle Valve Open 0.77 1 1.7 3.2 2.7 3.5 3 3.8 3.95 1.3 5.5 5.4 12 15 18 22 28 33 42 50 58 61 70 83 3.1 9.5 10 13 15 18 21 24 27 31 37 Swing Check Valve 4 5 7 9 11 13 16 20 26 33 39 .1 8.4 2.1 6 7 7.5 11 12 14 16 1.6 0.6 6.5 2.8 5 6.9 3.7 2.REFERENCES Pipe Fittings Pipe Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4-1/2" 5" 6" Pipe Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4-1/2" 5" 6" 120 Friction losses in terms of equivalent lengths of standard pipe Standard 90 ° Elbow Long Radius Elbow 45 ° Elbow Tee 1.4 5 5.35 0.6 2.7 4.4 4.5 8.5 6.2 1.2 5.5 16 22 27 37 44 57 66 85 99 110 130 140 160 Return Bend 8.8 7.4 1.9 11 0.3 1.9 8.1 1.7 2 2.4 1.8 0.3 2.1 7. 5 0.9 1.3 0.9 4.30 .2 1.4 0.7 0.24 3/4" .6 0.6 1.02 .5 2.24 .7 1.5 1.8 2.5 1.8 0.8 1.02 .2 2.5 1.02 .5 0.3 0.3 0.18 .04 .28 .0 3.15 .43 .10 .6 3.11 .02 .02 .03 .5 0.4 3.67 Pressure Loss (PSI) Valve Size 1-1/4" 1-1/2" 2" .1 4.7 2.05 .3 1.5 0.8 0.5 0.05 .3 0.5 3.02 .8 0.07 .17 .6 0.06 .5 0.1 1.11 .2 1.7 3.2 3.01 .01 .2 2.5 0.9 4.01 .5 2.0 1.3 1.54 .02 .2 .1 2.13 .5 0.02 .0 1.8 0.7 0.4 0.10 .04 .08 .40 2-1/2" 3" .4 2.7 4.4 2.03 121 .4 0.03 .3 0.2 1.7 0.9 1.8 0.5 1.5 4.9 1.8 Pressure Loss (PSI) Valve Size 3/4" 1" 1-1/4" 1-1/2" 0.16 .6 0.REFERENCES Pressure Loss Swing Check Valves Flow GPM 2 3 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 1/2" 0.03 .01 .2 1.07 .07 4" .43 .4 Bronze Gate Valves Flow GPM 1 2 5 8 10 15 20 30 40 50 60 80 100 120 140 160 1/2" .1 1.6 0.7 0.3 4.4 1.31 1" .0 3.01 .7 0.0 1.6 3.9 1.30 .07 .6 0.9 3.6 4" 0.2 1.4 3.01 .5 0.6 4.21 .0 2.06 .85 .9 1.14 .7 0.6 0.9 0.6 0.0 2.9 3.0 2.03 .15 .4 0.22 .04 .4 0.8 2.05 .1 1.7 2.0 Flow GPM 2" 46 48 50 55 60 65 70 75 80 90 100 120 140 Pressure Loss (PSI) Valve Size 1-1/4" 1-1/2" 2" 2-1/2" 3" 2.06 .62 .05 1. 7 0.6 1.0 1.2 1.8 8.0 2.9 5.4 3.2 0.6 4.4 4.6 11.8 2.0 Pressure Loss Normal Size 1-1/2" 0.8 13.6 1.4 1.1 0.5 2.1 4.3 12.AWWA Standard Flow GPM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 65 70 75 80 90 100 110 120 130 140 150 122 5/8" 3/4" 0.7 0.2 2.0 3.4 15.4 2.4 0.8 6.2 2.3 1.6 0.0 1.9 4.9 1.8 9.8 0.3 9.6 0.3 3.9 3.3 0.6 1.1 0.4 1.8 1.7 3.2 0.3 5.3 4.7 3.4 1.4 0.3 1.9 1.2 7.1 17.1 20.7 6.8 0.3 13.4 5.5 11.0 6.4 1.5 1.2 0.5 2.0 13.2 1.2 2.REFERENCES Pressure Loss Water Meters .0 1.3 1.3 1.0 2" 3" 4" 0.0 1.7 4.1 2.7 4.8 11.9 7.4 0.0 0.2 4.1 6.2 3.0 1.0 3.7 12.9 2.1 0.5 5.7 0.4 10.2 1.2 8.9 15.5 0.1 3.2 5.8 2.5 11.2 8.7 0.0 1.9 2.0 1" 0.6 1.7 0.8 .5 0.8 3.8 1.2 13.6 2.9 1.6 3.6 1.3 6.5 4.9 6.1 1.0 15.6 0.6 0.3 1.7 7.6 10.0 2.3 0.1 1.1 7.2 1.5 0.9 4.7 9.6 5.3 0.0 4.8 16.7 1.3 3.6 3.3 9.0 15.5 7.5 1.7 12.3 2.9 1.9 9.1 2.2 6.8 2.8 0.6 5. Bladder or Diaphragm Tank Design B .Plain Steel Tank Design 123 .Minimum tank volumes for proper system life Pump Capacity Minimum Drawdown GPH GPM Gallons A 20-40 B C 240 300 360 420 480 540 600 660 720 780 840 900 960 1020 1080 1140 1200 1260 1320 1380 1440 1500 1560 1620 1680 1740 1800 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 4 5 6 7 8 9 10 12 13 15 17 19 20 23 25 27 30 33 36 38 41 44 47 50 53 57 60 10 15 15 20 20 25 30 35 35 40 45 50 55 6 70 75 80 90 100 105 110 120 130 135 145 155 165 15 15 20 20 25 25 30 35 40 45 50 55 55 65 70 75 85 90 100 105 115 120 130 140 145 160 165 25 30 40 45 50 60 65 80 85 100 110 125 160 150 160 175 195 215 235 345 365 385 305 325 345 370 390 Total Tank Volume (Gallons) Switch Setting (PSI) 30-50 A B C 15 15 20 35 35 30 30 40 40 50 55 60 65 75 80 85 95 105 115 125 135 140 150 160 170 185 195 15 20 20 25 25 30 35 40 45 50 55 65 65 75 85 90 100 110 120 125 135 145 155 165 175 185 195 40 50 60 70 80 90 100 120 130 150 170 190 200 230 250 270 300 330 360 380 410 440 470 500 530 570 600 A 40-60 B C 15 20 20 25 30 35 40 45 50 55 65 70 75 85 95 100 110 125 135 140 155 165 175 185 200 215 225 15 20 25 30 30 35 40 45 50 60 65 75 75 90 95 105 115 125 135 145 155 165 180 190 200 215 225 55 70 85 100 110 125 140 165 180 210 235 265 280 320 350 375 415 460 500 530 570 610 655 700 735 790 835 Notes: A .REFERENCES Pressure Tank Sizing Pressure Tank Selection Chart .Floating Wafer Tank Design C . 9 10.697 Properties of Water Atmospheric Pressure at Various Elevations Altitude Feet Above Sea Level Pounds per Square Inch (PSI) Atmospheric Pressure Feet of Water Inches of Mercury Sea Level 500 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 14.947 0.6 31.4 4.7 15.91 5.75 12.2 21.57 14.6 23.3 29.2 29.52 5.4 30.89 5.8 11.82 16.78 7.REFERENCES Reference Tables Equivalent Values of Pressure Inches of Mercury Feet of Water PSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 29.5 10.73 14.65 6.67 8.61 2.94 3.31 9.2 11.9 13.84 8.6 26.2 12.96 18.09 19.4 20.23 13.8 26.8 33.28 11.8 11.2 23.75 22.8 17.3 12.1 25.9 24 23.26 29. of Water (ºF) Pressure (ft Water) 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 212 0.2 28.39 5.73 13.13 2.59 0.3 10.52 31.95 2.35 21.26 3.6 124 Temp.4 30.93 3.78 24.14 6.7 14.84 1.15 26.4 14.8 24.35 7.9 29.7 13.65 32.2 27.6 32.8 33.3 32.6 34 .87 6.37 6.1 33.22 20.44 2.2 13.3 21.1 22.98 1.04 10.86 7.91 4.42 3.8 10.91 9.39 4.4 28.929 1.3 10.8 27.82 9.17 11.47 1.49 0.22 14.1 24.88 26 27.19 2.33 8.17 1.7 12.1 26.58 10.25 12.8 25.45 13. 885 1.85 227 454 15.NV.85 Gallons Per Minute 9 Gallons Per Minute 11. per minute Ft.137 0.7 34 10.746 33000 550 1. lbs.KS.48 0.NE.22 125 .831 325. Acre Foot Acre Foot per Day Acre Inch per Hour Liter per Second Miner’s Inch (ID. per second H.028 43560 325829 3630 27100 Gallons Cubic Feet of Water Kilograms To Convert From Fahrenheit Celsius Horsepower To Kilowatts Ft. H. Kilowatts To Convert From Inches Meters Miles Rods Multiply By To Convert From 3. Cubic Meters/Hr.402 0.UT.28 5280 16.P.063 227. Cubic Meters/Hr. Length To Centimeters Feet Feet Feet Weight To Pounds Pounds Pounds Temperature To Celsius Fahrenheit Multiply By 0.132 3. lbs. in./minute Multiply By Liters/Sec.227 0.000 US gal.ND.SD. Gallons Per Minute Gallons Gallons Per Minute Gallons Per Minute Gallons Per Minute 0.341 Multiply By 2.WA) Miner’s Inch (AZ. Cubic Feet/Sec.002 500 4. NM.P.35 H. Cubic Feet/Sec.33 62.54 3.785 231 0.OR) Head To Feet Inches of Mercury PSI Meters Inches of Mercury Feet of Water Feet PSI PSI Feet of Water Meters of Water Volume To Liters Cubic Inches Cubic Feet Cubic Meters Gallons Gallons Gallons Cubic Meters Cubic Feet Gallons Cubic Feet Gallons Capacity To Multiply By To Convert From 2.278 448.31 2.1 0.REFERENCES Conversions To Convert From PSI PSI Feet Feet Feet Inches of Mercury Meters Kilograms per sq.305 0.P.28 14. Pounds Per Hour Gallons Per Minute Liters/Sec.264 42 7.2 Multiply By 5/9 X (oF-32) 9/5 X (oC + 32) 1.35 2. Liters/Hr.000.433 0.22 14.MT./day = 695 US gal. H.5 Multiply By 8.004 0.CA.04 0.P. ATM ATM ATM To Convert From Gallons Gallons Gallons Gallons Liters Barrel (Oil) Cubic Feet Cubic Feet Acre Foot Acre Foot Acre Inch Acre Inch To Convert From Gallons Per Minute Gallons Per Minute Gallons Per Minute Gallons Per Minute Gallons Per Minute Cubic Meters/Hr. It is also important that you do not discard the shipping carton or container. FOR INFORMATION OR ASSISTANCE CONTACT: Customer Service Department 800. The carrier’s agent will make an inspection and usually will grant a concealed damage notation. you do so at your own risk and expense.com 126 .REFERENCES Lost or Damaged Goods IMPORTANT Every carrier used by Franklin Electric. by UPS unless customer agrees to take full responsibility. If cartons. thoroughly inspect each shipment immediately upon arrival. Due to frequent damage of heavy UPS shipments. notify the carrier at once and request an inspection. does not ship orders over 75 lbs. Inc. A concealed damage report should be made within ten (10) days of delivery of the shipment. is required to verify and sign for the condition of and the number of pieces that are released to them for delivery. Claims for short or damaged material must be filed in writing with the carrier immediately after delivery. Please. Failure to do this could negate any opportunity you have to file a claim. If you give the carrier a clear receipt for the goods that have been damaged in transit.269. packages. it is important that you notify the driver and insist on a notation of the loss or damage across the face of the freight bill.franklin-electric. Franklin Electric. or crates are received in short or damaged condition. When you sign the Bill of Lading.0063 www. but we are not responsible for collection of claims or replacement of material (shortage or damage) if not noted on the Bill of Lading at the time of delivery. Inc. you legally assume responsibility of the shipment being delivered. We are willing to assist you to collect claims for loss or damage. Our control and responsibility for any shipment ceases when the carrier signs the Bill of Lading. If concealed loss or damage is discovered. The Company shall IN NO EVENT be responsible or liable for the cost of field labor or other charges incurred by any customer in removing and/or affixing any product. the Company will repair or replace to the buyer any portion of this product which proves defective due to materials or workmanship of the Company. THIS WARRANTY DOES NOT APPLY TO products damaged by acts of God. Subject to the terms and conditions listed below. This warranty gives you specific legal rights. 127 . Seller’s and the Company’s only obligation. the representatives or any other parties. THE WARRANTY AND REMEDY DESCRIBED IN THIS LIMITED WARRANTY IS AN EXCLUSIVE WARRANTY AND REMEDY AND IS IN LIEU OF ANY OTHER WARRANTY OR REMEDY. The Company will consider products for warranty for 12 months from the date of installation or for 24 months from the date of manufacture. INCIDENTAL OR CONSEQUENTIAL (INCLUDING. and you may also have other rights which vary from state to state and country to country. OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS). shall not be relied upon by the buyer. the Company. alteration. 3. Before using. AND THE BUYER AGREES THAT NO OTHER REMEDY SHALL BE AVAILABLE TO IT. the user shall determine the suitability of the product for his intended use. or 4. shall be the replacement and/or repair by the Company of the product as described above. DISCLAIMER: Any oral statements about the product made by the seller. ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT. misapplication. Some states and countries do not allow the exclusion or limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages. part or component thereof. or components. Product was not installed in accordance with applicable codes. THIS WARRANTY WILL IMMEDIATELY VOID if any of the following conditions are found: 1. normal maintenance services and the parts used in connection with such service. normal wear and tear. LOSS OR DAMAGE. The Company shall have the sole right to choose whether to repair or replace defective equipment. Product is used for purposes other than those for which it was designed and manufactured. Inc. The Company has the right to inspect any product returned under warranty to confirm that the product contains a defect in material or workmanship. so the above exclusion or limitations may not apply to you. INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS. Product was damaged as a result of negligence. maintenance or storage. and user assumes all risk and liability whatsoever in connection therewith. or any other conditions beyond the control of the Company. INJURY TO PERSON OR PROPERTY. nor to an excess of recommended maximums as set forth in the product instructions. and are not part of the contract for sale. whichever occurs first. The buyer should return the product to the place of purchase for warranty consideration. BUT NOT LIMITED TO. accident. 2. The Company reserves the right to change or improve its products or any portions thereof without being obligated to provide such change or improvement to previously sold products.WARRANTY INFORMATION Limited Warranty THIS WARRANTY SETS FORTH THE COMPANY’S SOLE OBLIGATION AND PURCHASER’S EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCT Franklin Electric Company. NEITHER SELLER NOR THE COMPANY SHALL BE LIABLE FOR ANY INJURY. INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ordinances and good trade practices. DIRECT. parts. abuse. and buyer’s only remedy. operation. EXPRESS OR IMPLIED. do not constitute warranties. improper installation. tampering. WHICH OTHER WARRANTIES AND REMEDIES ARE HEREBY EXPRESSLY EXCLUDED. including lightning. LOST SALES. TO THE EXTENT EITHER APPLIES TO A PRODUCT SHALL BE LIMITED IN DURATION TO THE PERIODS OF THE EXPRESSED WARRANTIES GIVEN ABOVE. Product was not installed by a Franklin Certified Contractor. and its subsidiaries (hereafter “the Company”) warrants that the products accompanied by this warranty are free from defects in material or workmanship of the Company. NOTES 128 . . 824. IN 46714 PH: 260.2900 FAX: 260.franklin-electric. Spring St.400 E.824.com MH2009 08/09 . • Bluffton.2909 www.