Fabrication programSafety Full lift safety valve with spring loading (AIT) EP AP ES CP EP AP ES CP Mod. 496 EN Mod. 495 EN Connection: Flange x Flange Connection: Female thread x Female thread DN1 x DN2: 20x32 to 200x300 FR1 x FR2: 3/4”x1 1/4” and 1”x1 1/2” Material: Cast Iron. PN-16 Material: Cast Iron. PN-16 Nodular iron. PN-40. 350ºC Nodular iron. PN-40. 350ºC Cast steel. PN-40 Cast steel. PN-40 Stainless steel. PN-40 Stainless steel. PN-40 Seal: Metal Seal: Metal The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability entrance to open instantly and totally. to the valve and is characterized by its ability to open Design in accordance with “International Standard ISO instantly and totally. 4126-1 Safety Valves”. Design in accordance with “International Standard ISO 4126-1 Safety Valves”. Depending on version Depending on version -60ºC to +450ºC 0,20 bar to 40,00 bar Steam / Gases / Liquids -60ºC to +450ºC 0,20 bar to 40,00 bar Steam / Gases / Liquids Materials according ASME code section II and ASTM.5 standard.90 psi to 580.2ºF to +842ºF 2. Connections according ASME B1. 486 ASME Mod.1”.1 standard. Safety EP AP ES CP EP AP ES CP Mod. 150 lbs and 300 lbs Stainless steel. 300 lbs Stainless steel.90 psi to 580. Design in accordance with “ASME code section VIII Design in accordance with “ASME code section VIII Div.20.15 psi Steam / Gases / Liquids -20. 150 lbs and 300 lbs Material: Carbon steel. open instantly and totally. 300 lbs Seal: Metal Seal: Metal The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to entrance to the valve and is characterized by its ability to open instantly and totally.2ºF to +842ºF 2. Div. Depending on version Depending on version -20. Connections according ASME/ANSI B16. Materials according ASME code section II and ASTM.15 psi Steam / Gases / Liquids . 485 ASME Connection: Flange x Flange Connection: Female thread NPT x Female thread NPT NPS1 x NPS2: 1”x 2” to 8”x10” FNPT1 x FNPT2: 3/4”x1 1/4” and 1”x1 1/2” Material: Carbon steel. Center to face dimensions according API-526.1”. 4126-1 Safety Valves”. to open instantly and totally.00 bar Steam / Gases / Liquids -60ºC to +450ºC 0. Design in accordance with “International Standard ISO Design in accordance with “International Standard ISO 4126-1 Safety Valves”. PMS-62 bar PN-25/40/63/100/160. 596 EN Mod. PMS-95 bar Stainless steel Stainless steel PN-25/40/63/100/160.00 bar Steam / Gases / Liquids . PMS-62 bar PN-25/40/63/100/160. Depending on version Depending on version -60ºC to +450ºC 0.20 bar to 95.20 bar to 62. Safety Full lift safety valve with spring loading (AIT) EP AP ES CP EP AP ES Mod. 696 EN Connection: Flange x Flange Connection: Flange x Flange DN1 x DN2: 25x32 to 400x500 DN1 x DN2: 25x40 to 300x400 Material: Carbon steel Material: Carbon steel PN-25/40/63/100/160. PMS-95 bar Seal: Metal Seal: Metal The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability to open instantly and totally. 1 standard. Connections according ASME B1. PMS-36 bar Material: Bronze. Design in accordance with “ASME code section VIII Design in accordance with “International Div.90 psi to 522.20. Depending on version Depending on version -60ºC to +200ºC 0. PMS-522.14 psi Steam / Gases / Liquids . PN-40 Stainless steel. Standard ISO 4126-1 Safety Valves”.14 psi Stainless steel. instantly and totally. 300 lbs Seal: PTFE (Teflon) Seal: PTFE (Teflon) Silicone's rubber Silicone's rubber Fluorelastomer (Viton) Fluorelastomer (Viton) The valve works as an automatic pressure The valve works as an automatic pressure releasing releasing regulator activated by the static regulator activated by the static pressure existing at pressure existing at the entrance to the valve the entrance to the valve and is characterized by its and is characterized by its ability to open ability to open instantly and totally. Materials according ASME code section II and ASTM. 695 EN Mod.20 bar to 36. Safety CP EP AP ES AS EP AP ES AS Mod.00 bar Steam / Gases / Liquids -76ºF to +392ºF 2.1”. 685 ASME Connection: Male thread x Female thread Connection: Male thread NPT x Female thread NPT MR1 x FR2: 3/8”x1/2” to 1”x1” MNPT1 x FNPT2: 3/8”x1/2” to 1”x1” Material: Bronze. 1 standard.00 bar Steam / Gases / Liquids -320. Materials according ASME code section II and ASTM.14 psi Stainless steel. PN-40 Stainless steel. 895 EN CRYOGENIC Mod. to open instantly and totally.90 psi to 522. Connections according ASME B1.14 psi Steam / Gases / Liquids .8ºF to +392ºF 2. PMS-36 bar Material: Bronze. PMS-522.20. 885 ASME CRYOGENIC Connection: Male thread x Female thread Connection: Male thread NPT x Female thread NPT MR1 x FR2: 3/8”x1/2” to 1”x1” MNPT1 x FNPT2: 3/8”x1/2” to 1”x1” Material: Bronze. 300 lbs Seal: PTFE (Teflon) Seal: PTFE (Teflon) The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability to open instantly and totally. Depending on version Depending on version -196ºC to +200ºC 0. Div. Design in accordance with “International Standard ISO Design in accordance with “ASME code section VIII 4126-1 Safety Valves”.20 bar to 36.1”.Safety Full lift safety valve with spring loading (AIT) EP AP ES AS EP AP ES AS Mod. Safety EP AP ES AS EP AP ES AS EP AP ES AS Mod.088.1 standard. Materials according ASME code section II and Connections according ASME B1.57 psi Gases -60ºC to +200ºC 0.00 bar Gases -76ºF to +392ºF 2. Standard ISO 4126-1 Safety Valves”.1”.1”. 985 ASME Mod. Connections according ISO 2852 standard. PN-16 Seal: PTFE (Teflon) Material: Stainless steel. 694 CLAMP Connection: Male thread x Female thread Connection: Male thread NPT x Connection: Flange clamp x Flange clamp MR1 x FR2: 3/8”x1/2” and 1/2”x1/2” Female thread NPT DN1 x DN2: 10 x15 to 25 x 25 Material: Stainless steel.20 bar to 144. Depending on version Depending on version Depending on version -60ºC to +200ºC 0. instantly and totally. ASTM. Materials according ASME code section II and ASTM. ability to open instantly and totally. Div. 995 EN Mod.20 bar to 16.00 bar Steam / Gases / Liquids . 900 lbs Seal: PTFE (Teflon) Silicone's rubber Seal: PTFE (Teflon) Silicone's rubber Fluorelastomer (Viton) Silicone's rubber Fluorelastomer (Viton) Fluorelastomer (Viton) The valve works as an automatic pressure The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing releasing regulator activated by the static regulator activated by the static pressure existing at regulator activated by the static pressure existing at pressure existing at the entrance to the valve the entrance to the valve and is characterized by its the entrance to the valve and is characterized by its and is characterized by its ability to open ability to open instantly and totally. PN-160 MNPT1 x FNPT2: 3/8”x1/2” and 1/2”x1/2” Material: Stainless steel. Design in accordance with “ASME code section VIII Design in accordance with “ASME code section VIII Design in accordance with “International Div.20.90 psi to 2. -. if conditions so permit. and afterinstantly and totally. and/or to activate the opening with pressure. PN-40 Stainless steel.9% of the set pressure. 350ºC Cast steel. with models VYC Mod. at the first proportional to the pressure increase. Safety Normal safety valve Controlled safety pressure with spring loading (AN) relief System CSPRS EP AP ES CP Mod. Once evacuated and in keeping with a previous adjustment. -. .20 bar to 40. conditions of service demand. 495 and 496. PN-16 Nodular iron. -. repeatability and operational efficiency. 494 EN Mod. to assist with closing pressure. The control safety pressure relief system CSPRS device can be used with any safety valve available in the market and in particular. 486. PN-40 Seal: Metal The valve works as an automatic pressure releasing Controlled safety pressure relief system CSPRS valves are mainly regulator activated by the static pressure existing at the used where conventional direct-loaded spring action valves cannot entrance to the valve and is characterized by its ability to guarantee the opening and closing margins that certain specific open.00 bar Steam / Gases / Liquids valves.Stabilise the functioning in critical applications of one or several -60ºC to +450ºC0 0. 494. Depending on version to once again achieve closure with the desired watertightness.Reduce product losses and minimise them in the case of working with several valves at staggered pressures. -.Increase the operating pressure of the system up to 99.Improve performance. This allows us to: -. 004 Connection: Flange x Flange DN1 x DN2: 25x25 to 200x200 Material: Cast iron. 485. The objective is to help the closure by means of pressure so that the Design in accordance with “International Standard ISO valve remains completely watertight until reaching the set pressure 4126 -1 Safety Valves”.Improve the opening-closure hysteresis. position. PN-40. Depending on version Depending on version -60ºC to +250ºC 0. Safety Normal safety valve with spring loading (AN) AP ES AP ES Mod. PMS-25 bar Carbon steel. at the first proportional to the pressure increase. Design in accordance with “International Standard ISO Design in accordance with “International Standard ISO 4126 -1 Safety Valves”.20 bar to 25. PMS-25 bar Seal: PTFE (Teflon) Cierre: PTFE (Teflon) Silicone's rubber Silicone's rubber Fluorelastomer (Viton) Fluorelastomer (Viton) The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability to open. 296 EN Connection: Male thread x Female thread Connection: Flange x Flange MR1 x FR2: 1/2”x1” to 1 1/4” x 2” DN1 x DN2: 15x25 to 32x50 Material: Bronze. PMS-25 bar Stainless steel. and after instantly and totally. PMS-25 bar Material: Bronze. 295 EN Mod. 4126 -1 Safety Valves”.20 bar to 25. PMS-25 bar Carbon steel. PMS-25 bar Stainless steel. at the first proportional to the pressure increase. and after instantly and totally. to open.00 bar Steam / Gases / Liquids -60ºC to +250ºC 0.00 bar Steam / Gases / Liquids . PN-25 Stainless steel. 4126-1 Safety Valves”. PN-25 Seal: PTFE (Teflon) Seal: PTFE (Teflon) Silicone's rubber Silicone's rubber Fluorelastomer (Viton) Fluorelastomer (Viton) The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability to open proportional to the pressure increase. PN-25 Mixed (Bronze/Brass . steel).20 bar to 25. Design in accordance with “International Standard ISO Design in accordance with “International Standard ISO 4126-1 Safety Valves”. PN-16 Mixed (Bronze/Brass . PN-25 Stainless steel.S. PN-16 Material: Bronze/Brass.00 bar Steam / Gases / Liquids . 096 EN Connection: Male thread x Female thread Connection: Flange x Female thread MR1 x FR2: 1/4”x1/4” to 4”x4” DN1 x FR2: 8x1/4” to 100x4” Material: Bronze/Brass.00 bar Steam / Gases / Liquids -60ºC to +250ºC 0.S. steel).Safety Proportional safety valve with spring loading (AP) AP ES AP ES Mod. Depending on version Depending on version -60ºC to +250ºC 0. 095 EN Mod. to open proportional to the pressure increase.20 bar to 25. Depending on version +540ºC To be agreed Steam / Gases . -50ºC to +150ºC -0. is caused by opening the valve and discharging the expanded fluid at the speed of sound. control valves. 795 EN Mod. carbon dioxide. Safety Vacuum breaker safety valve Vacuum breaker safety valveMulti-stage diffusion silencers Mod. etc.73 psi to -5. one of a vacuum inside pressurised installations or a vacuum inside pressurised installations or the main problems is noise pollution. PN-16 Stainless steel. The noise vessels.05 bar to -0. Depending on version They are used in places such as power. oxygen and other gases. bringing it down to allowable levels. They achieve noise reductions of more than 50 dB without any additional acoustic absorption materials. 150 lbs Male thread NPT Seal: Silicone's rubber Seal: Silicone's rubber Female thread NPT Fluorelastomer (Viton) Fluorelastomer (Viton) SW welding end DN: To be agreed R: To be agreed Material: Carbon steel The valve acts as an automatic regulator of The valve acts as an automatic regulator of During the expansion process for compressible pressure drops and prevents the creation of pressure drops and prevents the creation of substances such as gases. nitrogen. 785 ASME ASME/MNPT ASME/SW …. 150 lbs Female thread GAS Stainless steel.80 psi Gases helium. Depending on version chemical and petrochemical plants to discharge safety valves. vessels.40 bar Gases -58ºF to +302ºF -0. air. steam or air. Silencers are a great way to reduce this noise. caused by discharging the valve. methane. PN-16 Material: Brass.others to be agreed Connection: Male thread x Free admision Connection: Male thread NPT x Free admision Connection: Flange MR1 x 6ØB: 3/8”x6ØB to 1”x6ØB MNPT1 x 6ØB: 3/8”x6ØB to 1”x6ØB Male thread GAS Material: Brass. in pressure lines and equipment that convey compressible substances such as steam.005 EN ASME/ANSI ASME/FNPT Mod. Face-to-face dimmensions in accordance with EN- 558.00 bar Steam / Gases / Liquids -60ºC to +400ºC 40. basic series 49 and 51. 172 EN ASME/ANSI Connection: For placing between flanges Connection: For placing between flanges DN: 15 to100 DN: 125 to 300 Material: Bronze. BS. DN -15 to 100.00 bar Steam / Gases / Liquids . ANSI. PN-40 Seal: Metal Disc check valve with centering ring for placing Disc check valve with centering ring for placing between flanges in accordance with DIN. etc. BS. PN-40 Cast steel. DN -125 to 300. UNE. 558.Check Disc check valve Mod. PN-16 Stainless steel. UNE. etc. PN-16 Cast steel. PN-16 Material: Cast iron. basic series 49. PN-40 Seal: Metal Stainless steel. Face-to-face dimmensions in accordance with EN. between flanges in accordance with DIN. PN-40 Bronze. 170 EN ASME/ANSI Mod. Depending on version Depending on version -60ºC to +400ºC 40. ANSI. PN-250 Seal: Metal Check valve with spring operated piston closure. 041 EN ASME/FNPT ASME/SW Mod. For use in: steam piping. Mod. PN-250 Seal: Metal Stainless steel. Depending on version +400ºC 0. vulcanizing autoclaves.00 bar Steam . tanks and vessels with condensate discharge. laundries. irons.20 bar to 42. 63 bar Cast steel. 043 EN ASME/FNPT ASME/SW Connection: Female thread GAS Connection: Female thread GAS Check Female thread NPT Female thread NPT Socket welding ends SW Socket welding ends SW R: 1/4” to 2” R: 1/2” to 1” Material: Brass. pressure reduction equipment. PMA. etc. PMA. 042 EN ASME/ANSI Mod. Steam traps Steam traps Piston check valve Thermodynamic steam trap 041-042 without filter 043-044 with filter Mod. 179 EN ASME/FNPT ASME/SW Mod.00 bar Steam / Gases / Liquids Seal: Metal For the extraction of steam condensates. multiple plate presses. 044 EN ASME/ANSI Depending on version Connection: Flange x Flange DN: 15 to 25 Material: Stainless steel. 63 bar -60ºC to +400ºC 250. PN-200 Material: Stainless steel. 1 1/2” and 2” ASME/ANSI Material: Cast steel.. PN-40 ASME/FNPT ASME/SW Cast steel. and petrochemical industries. heat exchangers. 343 EN Mod..Steam traps Float and thermostatic steam trap Inverted bucket steam trap Bimetallic steam trap 241 243 244 143 144 Mod. PMS-14 bar Cast steel. 144 EN R: 1/2” to 1”. PMS-14 bar Matériel: Cast iron. etc. MP.. 143 EN Mod. etc. BP. heat pressure steam condensates.. chemical and petrochemical industries. 40 and 50 Cast steel. in the For the extraction of steam condensates. MP.00 bar Steam +450ºC 80. etc. 243 EN Cast steel. BP. AP. PN-40 Mod. PMS-14 bar Seal: Metal Connection: Flange x Flange Mod.00 bar Steam +220ºC 16. Depending on version Depending on version Depending on version +220ºC 14. etc.. with automatic temperature control. in the chemical chemical and petrochemical industries. To extract saturated or super-heated medium or low. PN-16 R: BP 1/2” and 3/4” Seal: Metal Seal: Metal MP 1/2” and 3/4” AP 1/2” to 1” Material: Cast steel. AP.00 bar Steam . etc. PN-100 Seal: Metal Seal: Metal To extract saturated or super-heated low- pressure steam condensates. exchangers. Applicable to: steam piping. plants temperature control. heat exchangers. PN-100 Connection: Female thread GAS Seal: Metal Female thread NPT Socket welding ends SW Mod. 244 EN DN: BP 15 to 25 MP 15 to 25 ASME/ANSI AP 15 to 25 Connection: Flange x Flange Material: Cast steel. 241 EN ASME/FNPT ASME/FNPT ASME/FNPT ASME/SW Connection: Female thread GAS Connexion: Female thread GAS Connection: Female thread GAS Female thread NPT Female thread NPT Female thread NPT R: 1/2” to 1” R: 1/2” to 1” Socket welding ends SW Material: Cast iron. PN-40 Material: Cast steel. PN-40 DN: 15 to 25. plants with automatic Applicable to: steam piping. Applicable in: steam piping. multiple dish presses. Steam traps Thermostatic steam trap Ultrasonic leak detector 443 444 543 Mod. condensates. laundries. Seal: Metal During preventive maintenance. R: 1/2” Ultrasound is directional and localisable. Depending on version Depending on version +220ºC 22. PMS-22 bar we can remove or block the distorting ultrasounds. Leak Detection. irons. 443 EN ASME/FNPT ASME/SW Mod. – In valve seals. 003 Connection: Female thread GAS Material: ABS plastic . safeguarding the environment. Connection: Female thread GAS Female thread NPT Checking for wear on bearings. Solving mechanical problems in general. pressure It meets and exceeds the requirements of ASTM E1002-2005 for reducing equipment. PMS-22 bar Seal: Metal To detect leaks: Mod. etc. saving energy. sterilizers. we should place the stethoscope properly and we will detect. In a noisy environment Material: Stainless steel. condensate discharge. 444 EN ASME/ANSI Connection: For placing between flanges DN: 15 to 25 Material: Stainless steel. time and Applicable to: steam piping. PMS-22 bar Seal: Metal Mod. calenders. vessels with consequently money. audibly and visually. heat exchangers. 543 EN ASME/FNPT – In condensate purgers. vulcanizing autoclaves. cooking pots.Stainless steel Female thread NPT Socket welding ends SW R: 1/4” to 1” Material: Stainless steel. We can take corrective action. the To extract saturated or super-heated medium or low-pressure steam leaks that are affecting us.00 bar Steam 0ºC +220ºC Steam / Gases / Liquids . PN-40 Seal: PTFE (Teflon) Stainless steel. consult our In installations with steam. laundries and dry cleaners’. chemical... etc. vehicles. distilleries. toilets. Suitable for application in: ironing machines. etc. Can be used in packaging plants. the steam can be mixed with cold technical department). 1 Connection: Flange x Flange Connection: Female thread DN: 15 to 25 R: 1/2” Material: Nodular iron. paper and tannery pro- industry. PN-25 Material: Bronze (covered with synthetic rubber. 3/4". textile slaughterhouses. tanks. 1” and 1 1/2” Material: Nodular iron. 513 EN ASME/FNPT Mod. Depending on version Depending on version -60ºC to +230ºC 1.. ducts. the food In the manufacture of food. 253 EN ASME/FNPT Connection: Female thread GAS Female thread NPT Connection: Female thread R: 1/2” to 1” R: 1/2”. etc. PN-40 Seal: Fluorelastomer (Viton) Stainless steel. (For liquids. etc. detergent plants.Reducing Mixing Direct action pressure Steam-water mixing valve reducing valve Mod. cooking vats.40 bar to 17... ovens.50 bar Steam Mod. meat processing plants. 514 EN ASME/ANSI Watergun Pl. autoclaves. heat exchangers.) Cast steel. water to obtain instant hot water in the most economical way. machinery. steam For cleaning floors. filters. hospitals.. PN-40 Depending on version Seal: Metal +187ºC 0.. PN-16 Cast steel. PN-25 Material: Bronze. PN-40 Seal: Metal For steam and gases.. chemical laboratories.35 to 10.00 bar Steam / Gases / Liquids +82ºC 28. drying cylinders.00 bar Liquids .. dairies. Female thread. M10 Seal: Silicone's rubber Ø200 & Ø300. 150 EN ASME/ANSI Mod. internal).00 bar Liquids -60ºC to +200ºC Liquids . M4 Male thread NPT Ø90. Female thread. Female thread. (With or without Epoxi coating) Mod. Dowel Ø4. M6. M10 Seal: Silicone's rubber Ø150x60.5 mm. internal) Ø200x80 & Ø250x95. Sliding (Ø6 mm. Depending on version Depending on version -60ºC to +200ºC 16. PN-16 Ø110 & Ø150. M10 Ø300x115 & Ø350x130. Sliding (Ø8 mm. Male thread. Sliding (Ø18 mm. Female thread. Female thread. M12 To control the level of liquids in tanks. Sliding (Ø4 mm. Female thread. M10 R: 3/8” to 2 1/2” Ø105. (With or without Epoxi coating) Spherical: Ø60. etc. internal) Material: Stainless steel. M12 Cylindrical: Ø40x50. 151 EN ASME/MNPT Ø60x120. 152 Connection: Flange Material: Stainless steel Reducing-Mixng DN: 15 to 65 Flat: Material: Stainless steel. Female thread. deposits. Float-Buoys Float-Buoys Float valve Buoys Mod. Female thread. internal) Ø60x120. PN-16 Ø150x60. M4 Ø40x50. Connection: Male thread GAS Ø60. CL300 Material: Brass.Instrumentation Siphon tube. ensure that the pressure gauge is activated by water condensation and not by steam. If working with steam. B40 R: 1/4” to 2” Stainless steel. heating and steam systems. For pressure gauges Needle valve Mod. etc. 147 EN ASME/FNPT ASME/SW Connection: Male thread GAS Connection: Female thread GAS Male thread NPT Female thread NPT R: 1/4” to 1/2” Socket welding ends SW Material: Cast steel. gases and steam. PN-250 Sleeve and nuts Seal: Metal Connection: Female thread GAS Female thread NPT R: 1/4” to 1/2” Material: Brass Stainless steel Prevents breakdowns and misalignments in pressure For liquids. Isolates the pressure gauge from extreme temperatures by creating thermal isolation space. PN-200 Cast steel.00 bar Steam/Gases/Liquids . pneumatic. which cause malfunctioning pressure gauges. For use in hydraulic. 011 EN ASME/MNPT Mod. Depending on version Depending on version -60ºC to +400ºC 51.70 bar Steam/Gases/Liquids -60ºC to +400ºC 250. PN-250 Stainless steel. Absorbs abrupt pressure changes or water hammer chemical and food industries. gauges. -Notably slow down thermic transmission. the metal plate and soldering cord. remains of electrodes. the water supply must be suitably treated. carbonic acid. 260 EN Instrumentation Connection: Flange x Flange Connection: Flange x Flange DN: 25 to 50 DN: 20 to 50 Material: Cast steel. This of electrodes. -Produce thermic voltages. If these salts are not eliminated. 460 EN ASME/ANSI Mod. remains tubes. -Notably slow down thermic transmission. carbonic acid. etc. causing cracks in the metal plate and soldering cord. which are The water in the boiler contains salts. oxygen. high maintenance costs. causing high maintenance costs. causing -Destroy the metal plate of the boiler.00 bar Steam/Liquids . etc. the To prevent these lime deposits forming. bubbles and foam are formed when the density of the water increased. oxygen. meaning an unnecessary and excessive meaning an unnecessary and excessive consumption of fuel. bubbles and foam are salts are not eliminated.00 bar Steam/Liquids +250ºC 40. Bleeding Bleeding for steam boilers Blowdown valve for bleeding dirt and sludge For steam boilers Mod. which are built up by the continuous evaporation. together with particles of dirt. formed when the density of the water increased. If these built up by the continuous evaporation. PN-40 Material: Cast steel. This leads to a high level of rust which may: leads to a high level of rust which may: -Destroy the metal plate of the boiler. To prevent these lime deposits forming. with the result that certain salts are changed producing result that certain salts are changed producing impurities which form sludge and encrusted impurities which form sludge and encrusted deposits which then adhere to the sides or the deposits which then adhere to the sides or the bottom of the boiler and to the combustion bottom of the boiler and to the combustion tubes. together with particles of dirt. Depending on version Depending on version +250ºC 40. with the water supply must be suitably treated. causing cracks in -Produce thermic voltages. PN-40 Seal: Metal Seal: Metal The water in the boiler contains salts. consumption of fuel. Damage caused by erosion and perforation. To prevent these lime deposits forming. PN-40 Seal: Metal Seal: Metal Programmable control for automatic bleeding of dirt and sludge. entailing the of rust which may: following high costs: -Destroy the metal plate of the boiler. meaning an . causing high maintenance . sulphates. MP-1 and MP-2 Connection: Air inlet 1/8” Control and discharge tube Ø6/4 mm. product losses. . remains of The continuous bleeding process prevents: electrodes. (Sand.00 bar Steam/Liquids . the combustion tubes. And reduces: -Notably slow down thermic transmission. which are built up by the The continuous desalting valve is used to empty an adjustable continuous evaporation. etc.etc. .Indirect: Stoppages.etc. -Produce thermic voltages. 260-A EN Mod.). organic matter. clay. Voltage: 220 V. carbonic acid. nitrates.. be suitably treated. bubbles quantity of water from the steam boiler. soldering cord.Direct: Replacement or repair of materials. (Calcium.A. with the result that certain salts are changed chlorides. and magnesium salts. oxygen.Foam formation caused by excessive saline concentration.Incrustations and sediments caused by precipitation of calcium unnecessary and excessive consumption of fuel. rock which then adhere to the sides or the bottom of the boiler and to residues. . . . the water supply must magnesium.Solid materials in suspension.00 bar Steam/Liquids +300ºC 40. together with particles of dirt. metal residues. producing impurities which form sludge and encrusted deposits . costs. sodium. If these salts are not eliminated. causing cracks in the metal plate and ... iron. with its corresponding drag. which obstruct thermic transmission and which cause unnecessary and excessive fuel consumption. This leads to a high level .Organic matter and mineral salts in solution. Depending on version Depending on version +250ºC 40. ±10% 50/60 Hz. potassium.C. removing: and foam are formed when the density of the water increased. The water in the boiler contains salts.Bleeding for steam boilers Blowdown valve Continuous desalting valve for automatic bleeding dirt and For steam boilers sludge For steam boilers 260-A MP-2 MP-1 260-A Mod. 560 EN ASME/ANSI Connection: Flange x Flange Connection: Flange x Flange DN: 20 to 50 DN: 15 to 25 Material: Cast steel.).Danger of boiler explosion. bicarbonate ions. PN-40 Material: Cast steel.. ...etc. RD-1 Voltage: 220 V. ARD-1 Refrigeration circuit..). rock residues. with its corresponding and bring them down to between 24 ÷ 26°C.. 560 and 560- .Indirect: Stoppages. ±10% 50/60 Hz. metal residues. Bleeding Automatic continuous desalting valve Samples water-cooler For steam boilers For steam boilers EC-1 560-A RD-1 ARD-1 Mod.560-A EN ASME/ANSI Mod. 999 de 1/2” with simple joint plug The conductivity electrode EC-1. iron. nitrates. . Direct sampling is incorrect: .Foam formation caused by excessive saline concentration. ±10% 50/60 Hz.Danger of boiler explosion. Servomotor voltage: 220 V.A.. (Calcium. . As the matter. comparison and control ensures minimum water loss and thus gives considerate energy savings.00 bar Steam/Liquids +340ºC 140. dirt and desalting valve with servomotor allow the automatic desalting process of boiler water sludge in a steam boiler requires regular analysis of the which eliminates: water in order to verify that its parameters are within the .00 bar Steam/Liquids . . .C. magnesium. ideal levels af salinity and alkalinity demanded by law.etc. below the The continuous bleeding process prevents: minimum level. (Sand.C.. sulphates.560 DRM-1 EN ASME/FNPT Connection: Flange x Flange Connection: Sampling circuit: Tube Ø6/8mm. Sampling circuit. . drag.A. sodium. clay.Incrustations and sediments caused by precipitation of calcium and magnesium salts.etc. DN: 15 to 25 Refrigeration circuit: Female thread 1/2” Material: Cast steel. desalting valve to the Samples water-cooled DRM-1. the collection level is ideal and does not . PN-40 Blowoff valve: Mod.Direct: Replacement or repair of materials. Depending on version Depending on version +300ºC 40..etc. entailing the following high costs: interfere with the control and level regulation devices. potassium. chlorides.There is an obvious physical risk involved. . This combination of measuring. All the Continuous desalting valve (Mod. and falsify results. And reduces: .Solid materials in suspension.). The basic premise for conducting analyses correctly is which obstruct thermic transmission and which cause unnecessary and excessive fuel to bring the samples from the tap of the Continuous consumption.Organic matter and mineral salts in solution. PMS-32 bar Electrode connection collector Connection: Flange DN: 20 Material: Cast steel.. PN-40 Seal: Metal Material: Stainless steel. water is extracted continuously 30 ÷ 50 mm. PMS-10 bar Without assembly cupboard. . product losses. organic A) are provided with taps for obtaining samples. PMS-140 bar Desalting controller With assembly cupboard. the desalting controller RD-1 and the continuous Efficient monitoring of the purging of salts. bicarbonate ions.Damage caused by erosion and perforation.Losses by expansion increase the density of the water . Conductivity electrode EC1 Connection: Male thread R: 1” Material: PTFE (Teflon)- Stainless steel. Brass. Connection: Male thread GAS Viewer (CM): F =Front.8 x. processes.Automatic level controller Sliding buoy type automatic Buoy type automatic level controller level controller I F D 290 291 262 CC CM SC Mod.00 bar Liquids -60ºC to +300ºC 16. etc. regulation and signalling of the level of liquids in: wells. preheaters. I =Left Male thread NPT Blowoff valve: Mod. tanks.291 EN ASME/MNPT Distance between centres of flanges: 190 or 250 mm. PMS-19 bar Standard level fluctuation: 3. Maximum level fluctuation: 30. 290 EN/ASME Mod. 291 and 076 . Connection (SC): Flange with 4 screws M.4 Voltage: 220 V. Buoy: Ø60x120 sliding Maximum nº of switches: 1 This device guarantees automatic.000 mm. Buoy: Ø60x120 Maximum nº of switches: 10 Mod. 290. regulation This device guarantees automatic. cisterns. 999 1/2” with simple joint plug R: 2 1/2” Material: Stainless steel . PN-16 Maximum nº of switches: 1 Stainless steel. D =Right. Connection: Flange Material: Stainless steel DN: 25 Standard level fluctuation: 495 mm.A. safe and reliable control.. etc..000 mm.00 bar Steam/Liquids Mod. safe and reliable control. PN-16 (SC) Standard level fluctuation: 120 mm. pressurised vessels. and signalling of the level of liquids in: steam boilers. Depending on version Depending on version -60ºC to +150ºC 19. 16x40 Buoy: Ø150x60 sliding Material: Cast iron. 076 EN/ASME Connection: Bracket with 2 screws M. 262 EN/ASME Connection: M.C To be meant for Mod. TRD-604 (24/72 hours) and EN-12953 Part 6 (24 hours). 999 1/2” with simple joint plug This device guarantees a safe and reliable control. Material: PTFE (Teflon)- Stainless steel. EAC-1 Minimum level Connection: Male thread R: 1” safety electrode.500 mm. processes. regulation and electronic This device. Blowoff valve: Mod. RAC-2. Level electrode. Applicable to steam boilers in accordance with TRD-602. 176 EN ASME/MNPT Mod. ensures the signalling of the level of electrically conducting liquids in: steam and hot continuous control and display of the level. feedwater and alarm for: steam and hot water boilers. RAC-3 Automatic level controller Voltage: 220 V. etc. RS-1 Voltage: 220 V. pre-heaters. RN-1 Modulating level controller. 999 1/2” with simple joint plug Blowoff valve: Mod. Depending on version Depending on version +238ºC 32. PN-40 Material: Cast steel. condensates tanks. autoclaves.A. Electrode based electronic Modulating electrode based electronic level controller level controller For steam boilers For steam boilers Mod. etc. ES-1 Material: PTFE (Teflon)- Connection: Male thread Stainless steel. PN-40 Maximum nº of electrodes: 1 or 3 Maximum nº of electrodes: 1 or 3 Distance between centres of flanges: 190 or 250 mm. PMS-32 bar R: 1” Measuring standard length: 300 to 1. Distance between centres of flanges: 190 ó 250 mm. when combined with a motorised valve.C. EN-1 Modulating level electrode. PMS-32 bar Measuring standard length: 700 mm Electrode connection colector Electrode connection colector Connection: Flange Connection: Flange DN: 25 DN: 25 Material: Cast steel.C. safety controller. pressure vessels.A. with a high and low level water boilers. pressured vessels. ±10% 50/60 Hz. 276 EN ASME/MNPT Level controller. autoclaves. ±10% 50/60 Hz. processing.00 bar Steam/Liquids .00 bar Steam/Liquids +238ºC 32. condensation and feedwater tanks. preheaters. Minimum level RAC-1. in standards and industry guarantees in general.265 EN ASME/FNPT ASME/SW Mod. ensuring that there are no steam leaks. food and more. Also for checking processes. +300ºC 40. PN-40 175x25 175x30 Mod. PN-40 Graphite (Joints) Stainless steel. with the cost this would entail.366 EN ASME/ANSI 200x30 250x30 Connection: Flange x Flange DN: 15 to 200 Material: Borosilicate Material: Cast steel. particular. PN-16.00 bar Steam/Gases/Liquids . it enables verification of correct operation of the condensate conditions. direction and condition of liquid in a section of piping. It helps detect blockages in valves. filters and other line equipment. in any type of industry: chemical. traps.365 EN ASME/FNPT ASME/SW 100x15 100x25 Connection: Female thread GAS 125x20 Female thread NPT Socket welding ends SW 125x30 R: 1/2” to 2” 150x25 Material: Cast steel. The quality of the sight glass satisfies the most demanding safety It also enables observation of a product's viscosity. PN-40 63x15 Stainless steel. Level indicators Window Sight glasses Window sight glasses Transparency round glasses For window sight glasses Model 265 Model 365 Model 366 Mod. petrochemical. among others. its colour in the different phases of its production process. in special thermal and chemical In particular. turbidity and. 006 Connection: Female thread GAS Female thread NPT Type: Transparency 45x10 Socket welding ends SW R: 1/2” to 1” 63x10 Material: Cast steel.00 bar Steam/Gases/Liquids Depending on version -60ºC to +280ºC 40. steam and condensates. pharmaceutical. PN-40 150x30 Stainless steel. PN-40 80x12 80x20 Mod. including those under pressure. Depending on version Applicable to: piping conveying liquids. PN-40 To verify the flow. For visual checking of the level of liquids in all types of vessel. Depending on version Depending on version -60ºC to +400ºC 40. receivers. cisterns. PN-16 Cast steel. reservoirs. liquid ones.. gases and steam.166-ER EN ASME/ANSI Mod. PN-16 Material: Cast steel. PN-40 Stainless steel. gases and steam. PN-40 Material: Cast steel. . PN-40 Seal: Metal Seal: Metal Blowoff valve: Mod. PN-40 Cast steel. A multiple-slot polyprismatic viewer allows the level to be A multiple-slot polyprismatic viewer allows the level to be optically read. 999 3/8” with simple joint plug For use in boilers. PN-40 Stainless steel.. to control the level of liquids.166-EC EN ASME/ANSI Round-dowel level indicator box Square-dowel level indicator box Connection: Round-dowel Ø 20 mm.00 bar Steam/Gases/Liquids -60ºC to +400ºC 40.etc.. PN-40 Stainless steel. control the level of liquids.. receivers. Sight glasses Round-dowel level indicator Square-dowel level indicator Mod. 999 3/8” with simple joint plug Mod.. cisterns. | Box nº: 0 to X Box nº: 0 to X Material: Cast steel. 666 EN ASME/ANSI Mod. PN-16.. clearly differentiating liquid and gas phases from liquid ones. PN-40 Blowoff valve: Mod. reservoirs. . 466 EN ASME/ANSI Level gauges Level gauges Connection: Flange Connection: Flange Level indicators DN: 20 and 25 DN: 20 and 25 Material: Cast steel.etc. to For use in boilers. PN-16. Connection: Square-dowel ¨18 mm.00 bar Steam/Gases/Liquids . PN-40 Stainless steel. clearly differentiating liquid and gas phases from optically read. 00 bar Steam/Gases/Liquids +600ºC 392. Also. 066-PM Type: Reflection: A 5 prisms 0 to IX Type: A I to X B 5 prisms 0 to IX B/H I to X H 5 prisms 0 to IX Material: Natural muscovite mica Transparency: A V to IX B V to IX H V to IX Material: Borosilicate Klingerit cardboard type (Joint) Graphite (Joint) For visual checking of the level of liquids in all types of In combination with transparent glasses the life of these is vessel. 066 Mod. and chemical conditions. petrochemical plants.. Depending on version Depending on version +243ºC 100. in special thermal increased when working at high pressures and temperatures. solutions. sugar refining plants. pressure vessels. boiler water. they are protected from erosion. hydrofluoric acids. caustic products. viscous or corrosive media.. which results from The quality of the sight glass satisfies the most demanding the effects of the corrosive chemical components. Also for checking processes. hot and concentrated phosphoric acids. alkaline safety standards and industry guarantees in general.. sodium and potassium hydroxides and other contaminating. Applicable in level indicators for electrical generation plants. fertilizers..00 bar Steam/Gases/Liquids . paper mills. thermal power plants.Level indicators Window Sight glasses Reflection and transparency glasses Mica shield For level indicator box For level indicator box Mod. steam. etc. including those under pressure. petroleum refineries. PN-25 Seal: PTFE (Teflon)-Metal Connection: Male thread x Female thread R: 3/8” and 1/2” Material: Stainless steel.00 bar Steam/Gases/Liquids . Sight glasses Blowoff valve Mod. 999 EN Connection: Female thread Level indicators R: 3/8” and 1/2” Material: Brass. PMS-56 bar Seal: PTFE (Teflon)-Metal Simple plug Connection: Male thread x Tube Ø 12/10 and Ø 15/13 mm. R: 3/8” and 1/2” Material: Cast steel Stainless steel Sleeve Connection: Male thread R: 3/8” and 1/2” Material: Cast steel Depending on version -60ºC to +260ºC 56. 89220/15 .