Vt10 Hardware Installation Guide101 Gps Gsm External

WondeX VT 10Hardware Quick Installation Guide Version: 1.01 Date: 7/29/2008 Copyright ©Wonde Proud Technology 2007. damages for loss of business profits. The documentation is provided for testing. Subject to change without notice at any time. or utilization of the content and communication format as well as giving to other without authorization are prohibited. edition of this document. even if Wonde Proud has been advised of the possibility of such damages. punitive or other damages including without limitation. General Notes: All materials contained on this documentation is protected by the copyright law and may not be reproduced. evaluation. The customers using or reselling the product in such application do so at their own risk and agree to full indemnify Wonde Proud for any damages resulting from illegal use or resale. integration and product information purpose and it may contain deficiencies or inadequacies information of products. 2 of 7 . indirect. transmitted. incidental. dissemination. Copyright Reproduction. published or broadcasted without the prior obtaining authorization of Wonde Proud Technology. 2007. loss of business information or other pecuniary loss that arising out the use of or inability to use the documentation or product. All rights are reserved. Offenders will be held liable for payment of damages. direct.WONDE PROUD TECHNOLOGY. Wonde Proud or its supplier will not be liable for any consequential. This product is not intended for use in life support appliance. devices or systems where a malfunction of the product can reasonably be expected to result personal injury. Copyright © Wonde Proud Technology. business interruption. All right are reserved. ......6 6..............5 4.....................7 7........................................................ Install the Cable: ..............7 Copyright © Wonde Proud Technology.............. All rights are reserved....................................................5 4......................................... Introduction of Hardware:................................................. Mount the Device.............4 2...........................................................4 3...........................................................................................................................................................................................................6 5........................................... 2007............................................................. Insert the backup battery .............................................................WONDE PROUD TECHNOLOGY................................................... LED Indicators:.........................................2 Connect “USB” Cable:........... Insert the SIM Card:. About Wonde Proud Technology: .....................................................................................5 4.............. Table of Content 1.............................1 Power/Input/Output Cable: ........................................................................................................ 3 of 7 .... 1. Unscrew the back cover of device and pull out the lid by sliding lock to the right side. e. Insert the SIM Card: Please follow the steps below to insert the SIM Card correctly. Uplift the battery (if the battery is connected to the device) c. Unlock the SIM card slot by sliding the holder toward the “OPEN” direction. f. Place the SIM card into the SIM card holder. a. d. put back the battery and screw the back cover of the device. Please ensure the SIM card is well placed in the holder and well contacted. 4 of 7 . All rights are reserved. Then. the device might not detect the SIM card successfully. Lock the SIM card slot by sliding the holder toward the “LOCK” direction. b. Copyright © Wonde Proud Technology. 2007. Introduction of Hardware: Front Panel: GSM Antenna GPS Antenna Rear Panel: Mini USB Connector Power/Input/Output Connector Function Key 2. otherwise.WONDE PROUD TECHNOLOGY. 3. positive/negative digital inputs. put the cover of the device back and screw it well. b.8V) Negative triggered ( Io=160mA. c. Install the Cable: 4. 2007.1 Power/Input/Output Cable: This connector includes power.WONDE PROUD TECHNOLOGY. and negative digital outputs. a. 4. Connect the cable to the socket in the corner and place the battery well. Then. Unscrew the back cover of device and pull out the lid by sliding lock to the right side. Ipeak: 320mA) Corresponding Cable color Description/Specification DC 0~30V 4 5 6 7 8 9 10 Input 2 Input 3 Input 4 Output 1 Output 2 Output 3 Output 4 Copyright © Wonde Proud Technology. Ipeak: 320mA) Negative triggered ( Io=160mA. All rights are reserved. 5 of 7 . Definition 1 2 3 Power Ground Input 1 Positive triggered (above 5V as the trigger condition) ** Used for power sleeping mode activation/deactivation Positive triggered (above 5V as the trigger condition) Negative triggered (below 0. Ipeak: 320mA) Negative triggered ( Io=160mA.8V) Negative triggered (below 0. The pin assignment is following: Pin Assignment: PIN. Ipeak: 320mA) Negative triggered ( Io=160mA. Insert the backup battery Please follow the steps below to insert the backup battery correctly. 2007. Copyright © Wonde Proud Technology. Then. 5. All rights are reserved.WONDE PROUD TECHNOLOGY. Please inlet the holding metal bars to the two sides of the device body. Corresponding physically scheme of the Power/Input/Output connector: Power (+) Ground (-) Input 1 (white) (Positive) Input 2(Gray) (Positive) Input 3 (green) (Negative) Input 4 (Purple) (Negative) Output 1(Yellow) (Negative) Output 2(orange) (Negative) Output 2(Brown) (Negative) Output 2(Blue) (Negative) 4.2 Connect “USB” Cable: USB Cable can be used for the unit configuration. screw the metal bars onto a flat place. All input and output ports might not be working properly if the main power is NOT connected. 6 of 7 . b. Mount the Device Please refer to the following: a. No. Wonde Proud Technology provides advanced solution for GPS related solutions including the various GPS components.Sec.Shin Tai Wu Rd.1 second on / 3 seconds off Extinguishment 1 second on / 1 seconds off Solid on Status Not Ready or Searching GSM signal Registered to GSM network successfully GPS off GPS not fixed GPS fixed 7. About Wonde Proud Technology: WondeX VT10 device is manufactured by Wonde Proud Technology.1. 2007.O. Wonde Proud Technology Web site: Tel: Fax: Address: http://www. 6. Taiwan.6 second on/ 0.C Copyright © Wonde Proud Technology.. All rights are reserved.com +886-2-26968498 +886-2-26968499 4F.wondeproud. Sijhih city.100. Please contact us at the phone and fax number list below or visit our website for further product information. Automatic Vehicle Location (AVL) device (data logger & real time tracking devices). 7 of 7 . R.6 second off 0.WONDE PROUD TECHNOLOGY. LED Indicators: Indicators GSM (Red) GPS (Green) Blinking Behavior 0. Taipei county 22102.