•iUser Manual TS-BT35A08 Charging 1.5mm stereo audio output. Playing music 1. •Operation: up to 8 hours. •Use with home stereos/speakers. •Support A2DP stereo profile. If this is your first time you use the device. A full charge will provide up to 8 hours of play time. •3. •Class2. To enter pairing mode.Technology Data •Bluetooth version: Support Bluetooth V3. The music receiver's LED light will glow red during charging. FCC. The devices should now recognize each other and pair.). Connect the other end to the USB input of your PC. LED lights beneath the button indicate device connection and charging status. connect the small end to the mini -USB input of the music receiver. car stereos. can connect microphone and support phone calling through Bluetooth dongle. laptop or USB power converter. Using the supplied audio cable and adaptors. •Sleep mode for energy conservation. Using the supplied USB cable. •Certificated BQB.0. headphones(etc. range33’(10m). 3. 2. please pair the device first 1. connect the music . The LED on the music receiver will slowly flash blue after successful pairing. •Support handsfree. 2. press and hold the on/off button for 5 seconds until both red and blue LEDs flash. 3. Touch and hold one button to power on and it will automatically search for a compatible transmitter. No any code to enter if connect with Apple and Android devices. CE. Search for the music receiver on your mobile phone or compatible transmitter. When charging is finished. the red LED will turn off. telephone access to the speakerphone comes MIC. 3. you can cut into the call status. and than press the key to open to answer a voice call. Default your phone using Bluetooth microphone. B. or compatible source) is turn on and paired with the music receiver and that the devices are no more than 33’ (10m) apart. 4. the phone cuts into the state before automatically. Note: If you can not hear the music. Check and make sure the volume is not turn down or muted. 2. Make sure your stereo system is set to AUX input or whichever input is the corresponding input to the music receiver. The blue LED on the music receiver will flash slowly. 2. A. indicating a connection. Hands-free 1. Model phone. 4. Phone calls. receiver to the auxiliary (AUX) input your home or car stereo. Make sure the transmitter (Mini jack. . the Bluetooth device will shut down. Press “Play” and the music will be sent wireless to the music receiver. After the completion of the call. Disconnect after one minute. 3.
Report "User Manual Bluetooth Audio Receiver Ts-bt35a08"