Tyco Fig.110-190 Ball Valves Datasheet

March 26, 2018 | Author: Mahdi Daly | Category: Washer (Hardware), Valve, Screw, Structural Steel, Building Materials
Share
Report this link


Comments



Description

Utility Ball Valve RangeA comprehensive range of Utility Ball Valves to suit a wide range of general industrial applications. Features • The range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections. • 3/4/5-way multi-port designs available. • ISO 5211 top mounting plate available, for easy actuation, on selected models. • Body construction either investment or sand cast according to model. • Carbon steel or stainless steel body materials. • Wide range of pressure ratings available. • Reduced and full bore models. • Locking facilities on all models. • Seat material options available. • Fire safe models available. www.tycovalves-eu.com Application Technical Data The range includes valves ideal for general industrial and service applications including water, oil, gas and chemical processes. Certain models also offer designs suitable for more hazardous services such as fuel and inflammable substances. Sizes (mm) (inch) Pressure ratings DN8 to DN300 : 1/4” - 12” : PN10/16, PN25/40, PN63 ANSI 150/300 End connections Screwed : BSPP, BSPT, NPT Socket & Butt Weld Flanged : ANSI 150/300 PN10/16, PN25/40 Special connections on request Tyco reserves the right to change the contents without notice HDLDS-0009-EN-0503 Utility Ball Valve Range F110 - One-piece body ball valve See page 4 • An economical, investment cast, one-piece body ball valve in stainless steel Size range DN8 (1/4”) to DN50 (2”) - Reduced Bore F120 - Two-piece body ball valve See page 5 • General purpose, 1000 psi (PN63) ball valve, in stainless steel Size range DN8 (1/4”) to DN50 (2”) - Full Bore F130M - Three-way split body ball valve • • • • See page 6/7 With ISO 5211 top mounting plate and fully enclosed bolting Flanged ANSI 150, 300 or DIN PN 10/16, 25/40 L-, T- or LL-port options, 90° operation Carbon steel or stainless steel bodies Size range DN50 (2”) to DN150 (6”) - Full Bore F133M - Three and four-way split body ball valve • • • • • See page 8/10 With ISO 5211 top mounting plate and fully enclosed bolting End connections screwed, socket weld, butt weld or flanged Flanged ANSI 150, 300 or DIN PN 10/16, 25/40 L-, T- or LL-port options, 90° operation Carbon steel or stainless steel bodies Size range DN10 (3/8”) to DN50 (2”) - Full and Reduced Bore F138 - Three way multi-port ball valve • • • • With ISO 5211 top mounting plate Investment stainless steel cast body Screwed ends, NPT, BSPP, BSPT reduced bore L- or T-port options, 90° operation Size range DN8 (1/4”) to DN50 (2”) - Reduced Bore Tyco reserves the right to change the contents without notice page 2 See page 11 Three-piece economical ball valve See page 12 • Three piece.Full Bore F180/F180F .DN8 (1/4”) to DN100 (4”) F180F . butt weld or socket weld • Carbon steel or stainless steel bodies Size range DN8 (1/4”) to DN100 (4”) . butt weld or socket weld Carbon steel or stainless steel bodies F180F Fire safe tested to API 607 Size range F180 .Full Bore and Reduced Bore F190/F190F . screwed.Three-piece ball valve to ISO 5211 See page 13/14 • With ISO 5211 top mounting plate • End connections flanged. carbon steel or stainless steel bodies F190F Fire safe tested to API 607 Size range DN15 (1/2”) to DN300 (12”) . swing-out design • End connections screwed.Three-piece heavy duty ball valve • • • • See page 15/18 With ISO 5211 top mounting plate and fully enclosed bolting End connections screwed.Full Bore Tyco reserves the right to change the contents without notice page 3 . 25/40 Investment casting for 4” and under.Utility Ball Valve Range F150 .Full Bore F170 . butt weld or socket weld • Carbon steel or stainless steel bodies Size range DN8 (1/4”) to DN100 (4”) .DN10 (3/8”) to DN80 (3”) .Split body flanged ball valve • • • • See page 19/23 With ISO 5211 top mounting pad Flanged ANSI 150. 300 or DIN PN10/16. 0 105 52 78.18 3/4" 20 12.0 123 60 100.0 0.0 15.5 1.0 10.Utility Ball Valve Range F110 .30 0.0 19.43 1 1/4" 32 20.0 83 36 44.70 1 1/2" 40 25.0 0.0 16.0 85 42 57.One-piece body ball valves Features Materials of construction No.0 0.5 85 44 60. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 Body Insert Ball Seat Anti-static Stem Handle Stem Packing Thrust Washer Gland Ring Handle Sleeve Handle Washer Stem Nut Locking Device CF8M / 1.0 0.0 72 34 39.0 105 48 71.0 W (kg) 3/8" 10 7.Reduced bore Quantity 1 1 1 2 1 1 1 1 1 1 1 1 1 Dimensions (mm) Size DN Ød G H L B1 1/4" 8 5.0 8.0 17.7 19. one piece body Stainless steel construction only Screwed ends to: BSPP BSPT NPT • Blow-out proof stem • Locking device • Size range DN8 (1/4”) to DN50 (2”) .0 14.4 0.4408 ASTM A351 Gr CF8M ASTM A351 Gr CF8M PTFE A276 Type 316 SUS304 PTFE PTFE SUS304 Vinyl SUS304 SUS304 SUS304 • • • • General purpose 1000psi (PN63) ball valve Investment cast.0 16.0 0.0 17.25 1" 25 16.0 7.0 11.07 PRESSURE IN BAR FE PT PRESSURE IN PSI Pressure/temperature chart TEMPERATURE IN °F (°C) Tyco reserves the right to change the contents without notice page 4 .11 1/2" 15 9.6 19.0 B2 11.0 123 60 83.7 15.7 22.82 2" 50 32. Full bore PRESSURE IN PSI • • • • TEMPERATURE IN °F (°C) Tyco reserves the right to change the contents without notice page 5 .0 195 95 120 22.0 3.0 0.0 0.Two-piece body ball valves Materials of construction Features No.0 0.0 0.36 Pressure/temperature chart FE PT PRESSURE IN BAR • • • • General purpose 1000 psi (PN63).0 168 85 110 20.0 1.0 136 62 75 13.28 1/2" 15 15.24 3/8" 10 11. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Body Ball Seat Body Seal Cap Anti-Static Stem Thrust Washer Stem Packing Gland Nut Stem Washer Stem Nut Handle Handle Sleeve Locking Device CF8M / 1.44 1 1/2" 40 38. investment cast body Stainless steel construction only Screwed end to: BSPP BSPT NPT DIN 3202 M3 face-to-face Adjustable stem packing Locking device Size range DN8 (1/4”) to DN50 (2”) .0 150 65 80 16. ball valve Two piece. CF8M PTFE PTFE CF8M / 1.0 0.2 108 54 60 10.4408 ASTM A351 Gr.44 3/4" 20 20.88 1 1/4" 32 32.0 195 110 140 25.56 1" 25 25.4408 A276 Type 316 PTFE PTFE SUS304 SUS304 SUS304 SUS304 Vinyl SUS304 Quantity 1 1 2 1 1 1 2 1 1 1 1 1 1 1 Dimensions (mm) Size DN Ød G H L B W (kg) 1/4" 8 11.Utility Ball Valve Range F120 .94 2" 50 50.2 108 52 50 10.0 168 80 90 17.0 1. CF8M / ASTM A216 Gr.Three-way split body ball valves Features Materials of construction No.Utility Ball Valve Range F130M .0619 PTFE 50% S.8 25% Carbon Filled PTFE A276 Type 316 50% S. PN25/40. optional LLport for 4 way • Tightness to ISO 5208 Cat. Class 300. please refer to page 7 Ball Port Configuration Side Entry AnglePort (L) Side Entry Double AnglePort (LL) Side Entry Straight Port (S) PN 25/40 ANSI 150 E TF RP Top view ANSI 300 PN 10/16 Side view TEMPERATURE IN °F (°C) Tyco reserves the right to change the contents without notice page 6 PRESSURE IN BAR Side Entry Tee-Port (T) Pressure/temperature chart PRESSURE IN PSI • • • * Quantity . A • Patented “SEALMASTER” stem arrangement • Double stem sealing complies with TA-Luft requirements • Trunnion mounted • Lower operation torque • ISO 5211 mounting plate • Full bore and flanged connection • Anti-static design • Optional ball and body patterns for various flow paths • Valve pressure rating: ANSI Class 150/300 DIN PN 10/16/25/40 2" . PN25/40. Class 300. WCB 1 4 1 4 4 * * 1 1 1 1 1 1 1 Set 1 1 1 1 2 1 1 1 1 1 1* • Four ball seats • Simplicity in replacing valve seats and packing • Investment cast body DN50 (2”) to DN100 (4”) • Sand casting DN150 (6”) • Standard L-port and T-port. Class 300. CF8M RPTFE PTFE A2-70 A2-70/8. 1. PN10/16.0619 CF8M / WCB. PN10/16. All Standards: 28pcs 6" Class 150.4408 / 1. 1. All Standards: 56pcs For No 25 Block cover.S Powder / 50% PTFE SUS316 TFM1600 CF8M / WCB. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Body Cap Ball Ball Seat Body Gasket Bolt Nut Bolt Bushing Anti-Static Stem Lower Thrust Washer Compress Ring Upper Thrust Washer Cover V-Ring Stem Packing Thrust Washer Gland Stop Bolt Cover Seal Belleville Washer Triangle Stopper Lock Saddle Stem Nut Stem Adapter Handle Block Cover CF8M / WCB.S Powder / 50% PTFE SUS304 A2-70 PTFE SUS301 SUS304 SUS304 SUS304 CF8 Steel ASTM A351 Gr. All Standards: 20pcs 4" Class 150.4408 / 1.3" Class 150.0619 ASTM A351 Gr. 1. PN25/40.4408 / 1. PN10/16. 9 25.Utility Ball Valve Range F130M .4 22.6 31.1 23.5 17 17 17 23 M8 M12 M12 M12 M12 Size DN 2" 2 1/2" 3" 4" 6" 50 65 80 100 150 Size DN Ød 50 65 76 100 150 ØB PN ANSI 150 PN PN ANSI ANSI PN PN ANSI ANSI PN PN 150 300 10/16 25/40 ANSI 300 10/16 25/40 150 300 10/16 25/40 150 300 10/16 25/40 127 149 168 200 269.5 19.8 36.6 1.6 1.6 1.6 20 18 20 20 22 20 22 24 24 28 PN ANSI ANSI PN PN ANSI ANSI PN PN ANSI ANSI PN PN 150 300 10/16 25/40 150 300 10/16 25/40 150 300 10/16 25/40 4 4 4 8 8 8 8 8 8 12 18 18 18 18 22 18 18 18 22 26 220 280 285 347 480 220 280 285 347 550 230 290 310 350 480 230 290 310 350 550 120.5 47.0 14.5 190.2 L Tyco reserves the right to change the contents without notice H H1 M 80 97 108 129 215 136.6 T PN N PN ANSI 300 10/16 25/40 50 65 80 100 150 ØD ANSI ANSI 150 2" 2 1/2" 3" 4" 6" ØC ANSI 3 3 3 3 3 152 178 190 229 279.5 162 186 213 280 400 500 500 650 800 page 7 .5 241.4 ØN 4 4 8 8 8 4 8 8 8 8 19 19 19 19 22.5 65.5 41.4 19.5 152.6 1.5 139.3 f 1.9 125 145 160 180 240 125 145 160 190 250 92 105 127 157 216 102 122 138 158 212 102 122 138 162 218 165 190 210 254 317.5 165 185 200 220 285 165 185 200 235 300 15.5 41.0 70 102 102 102 125 9.0 25.Three-way split body ball valves 25 Dimensions (mm) Size DN A B ØP G W 2" 2 1/2" 3" 4" 6" 50 65 80 100 150 23.2 19 22 22 22 22.9 37.9 17.0 22.3 25.4 28. CF8M RPTFE PTFE SUS304 A2-70 50% S. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Body Cap Ball Ball Seat Body Gasket Bolt Washer Bolt Lower Thrust Washer Compress Ring Upper Thrust Washer V-Ring Stem Packing Thrust Washer Anti-Static Stem Gland Belleville Washer Stem Nut Handle Handle Sleeve Rivet Stem Adapter Triangle Stopper Lock Saddle Locking Trigger Fix Plate Stop Bolt CF8M / WCB.S Powder / 50% PTFE A276 Type 316 SUS304 SUS301 SUS304 SUS304 Vinyl SUS304 CF8 SUS304 SUS304 SUS304 SUS304 A2-70 Quantity 1 4 1 4 4 16 16 1 1 1 1 Set 1 1 1 2 1-2 1 1 2 1 1 1 1 1 1 • Four ball seats • Simplicity in replacing valve seats and packing • Investment casting for body and end cap • Optional LL-port for 4 way • Patented “SEALMASTER” stem arrangement • Double stem sealing complies with TA-Luft requirements • Lower operation torque • ISO 5211 mounting plate • Anti-static design • Optional ball & body patterns for various flow paths • Size range. butt weld.Three. socket weld and flanged • Flanged connection in full bore only • 3/8" .4408 / 1. DN10 (3/8”) to DN50 (2”) Full and reduced bore • Valve pressure rating: ANSI Class 150/300 DIN PN 10/16/25/40 • End connections screwed.0619 ASTM A351 Gr.0619 CF8M / WCB.4408 / 1. 1.and four-way split body ball valves Handle for valve Size DN 40 (1 1/2”) Materials of construction Features No.Utility Ball Valve Range F133M . 1.S Powder / 50% PTFE SUS316 TFM1600 PTFE 50% S.1 1/4" For standard handle • 1 1/2" T-handle Ball Port Configuration Side Entry Tee-Port (T) Ball Port Configuration Side Entry AnglePort (L) Side Entry Double AnglePort (LL) Side Entry 3-way A Side Entry Straight Port (S) Top view Top view Side view Side view Tyco reserves the right to change the contents without notice page 8 Side Entry 4-way B . 5 11.0 8.threaded ends Full bore DN 40 (1 1/2”) Reduced bore DN 50 (2”) PRESSURE IN BAR E TF RP PRESSURE IN PSI Pressure/temperature chart TEMPERATURE IN °F (°C) Dimensions (mm) DN Size F 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" R F R 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 15 20 25 32 40 15 20 25 32 40 50 Ød H L M A B G ØP ØF W 12 15 20 25 32 38 63.5 42 42 50 50 70 70 12 12 14 14 16 16 M5 M5 M6 M6 M8 M8 F: Full bore R: Reduced bore Tyco reserves the right to change the contents without notice page 9 .3 8.5 18.Utility Ball Valve Range F133M .5 12 14 14 6.5 126.2 11.5 20.0 17.Three.and four-way split body ball valves .0 23.5 5.5 82 86 98 100 127 90 107 110.5 9.0 9.3 6.5 135 154 115 130 130 165 200 400 12.5 23. 2 11.2 11.2 11.6 1.Three.5 12 14 35 43 51 73 Size DN F G H 1/2" 3/4" 1" 1 1/2" 15 20 25 40 12 14 14 16 6.Utility Ball Valve Range F133M .5 70 79.5 20.8 167.2 14.6 1.5 82.5 82 86 98 127 ØE ANSI PN 150 300 10/40 89 98 108 127 95 117 124 156 95 105 115 150 15 20 25 38 PN ANSI ANSI PN ANSI 150 10/40 150 300 10/40 157.7 16 18 18 18 ANSI 300 10/40 1/2" 3/4" 1" 1 1/2" Ød ANSI 45 58 68 88 L 42 50 50 70 T Tyco reserves the right to change the contents without notice ØP ANSI ANSI PN 150 300 10/40 60.5 20 23.6 2 2 2 3 page 10 ANSI ANSI PN 150 300 10/40 16 16 16 16 16 19 19 22 14 14 14 18 N M W 4 4 4 4 130 130 165 400 M5 M6 M6 M8 .6 1.5 98.flanged ends Size DN 40 (1 1/2”) PRESSURE IN BAR ANSI 300 PN 25/40 E TF RP PRESSURE IN PSI Pressure/Temperature chart ANSI 150 PN 10/16 TEMPERATURE IN °F (°C) Dimensions Size DN A B ØC ANSI 150 ØD PN 15 20 25 40 18 17.5 65 75 85 110 f Øn PN ANSI 300 10/40 1.5 11.5 89 114.8 182 218 11.3 8 8 9.2 14.5 66.9 17.and four-way split body ball valves .3 15. 4408 CF8M / 1. ball valve • Three way multi-port ball valve with L-port or T-port options.0 63.5 15 8.5 9 9 9 11 11 11 11 14 29.5 24.50 TEMPERATURE IN °F (°C) Tyco reserves the right to change the contents without notice page 11 .5 34.0 20.70 2.5 49.67 1.3 58.8 45.8 M6*1.20 1.way multi port ball-valves .4408 RPTFE ASTM A351 Gr. RPTFE seats • Screwed ends to: BSPP BSPT NPT • ISO 5211 top mounting plate • Blow-out proof stem • Size range DN8 (1/4”) to DN50 (2”) Reduced bore Ball Port Configuration Side Entry Tee-Port (T) Side Entry Angle Port (L) No.threaded ends Detail G Materials of construction Features • General purpose 1000 psi (PN63).6 40. CF8M A276 Type 316 PTFE PTFE SUS304 SUS304 SUS304 SUS304 SUS304 Vinyl CF8M / 1.7 29.4408 PTFE PTFE SUS304 A2-70 SUS304 Quantity 1 2 4 1 1 2 1 1 1 1-3 1 1 1 1 1 Set 1 1 1 1 Top view Side view Pressure/Temperature chart PRESSURE IN BAR E TF RP PRESSURE IN PSI Detail K Dimensions (mm) Size DN A 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 8 10 15 20 25 32 40 50 11 11 11 13 19 19 23.8 M5*0. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Body Cap Seat Ball Anti-Static Stem Joint Gasket Thrust Washer Gland Handle Handle Washer Washer Handle Nut Handle Sleeve End Cap Stem Packings End Cap Seal Gland Washer Bolt Locking Device CF8M / 1.1 69 69 75 86 101 118 125 149 58 58 51 71 70 88 100 110 M±3.4 35.0 75.5 42 42 42 50 50 50 70 70 M5*0.8 M5*0.0 11.60 0.25 M8*1.6 34.5 18.60 0.35 5.Utility Ball Valve Range F138 .0 Wt(kg) 124 124 124 168 168 198 194 215 0.4 49.25 Ød±0.40 3.7 16.5 L±0.7 35.0 M6*1.5 15 8. 90° operation • Investment cast body • Stainless steel body.Three.0 52.5 15 7.4 35.0 M8*1.5 B ØC D E F ØP N 6 12 6 12 6 12 6 15 7.8 H±3.0 38.0 11.7 29.0 32.0 12.0 25.0 M6*1. 0 81.4408 / 1.4409 Pressure/Temperature chart Buttweld end /4"(DN8) .5 76.0 60 60 75 78 85 104 120 130 165 182 230 52 52 57 59 71 78 91 91 131 140 175 108 108 108 132 153 153 195 195 265 265 285 14.80 11.0 42.0 50.0 22.5 34.4 77.0 90.3 34. BSPT.0 97.0 115.76 1.7 66. 1.20 22.1 18.58 0.4408 / 1.0619 A276 Type 316 SUS304 PTFE PTFE SUS304 SUS304 SUS304 Vinyl SUS304 Quantity 1 2 2 1 4-6 4-6 4-6 2* 1 1 1 1 1 1 1 1 1 • General purpose 1000 psi (PN63) / 600 psi (PN40).0 63.8 48.0 22.30 3.0619 PTFE PTFE ASTM A351 Gr.9 61. 1.6 60.11/2"(DN40) 1 Dimensions (mm) DN Ød L H M ØN2 ØN3 ØM3 Wt(kg) 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 8 10 15 20 25 32 40 50 65 80 100 11.1 21.15 2.7 16. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Body Body Seat Body Gasket Ball Bolt Nut Bolt Washer Bolt Cap Anti-Static Stem Handle Washer Stem Packing Thrust Washer Gland Nut Stem Nut Handle Handle Sleeve Locking Device CF8M / WCB.5 0.0 18. swing out design • Investment casting for body and end cap • End connections screwed.5 18.38 0.4 12.0 107.0 25. butt weld and socket weld • Blow-out proof stem • Locking device • Size range DN8 (1/4”) to DN100 (4”) Full bore * Stainless steel welded connectors are CF3M/1. CF8M A2-70 SUS304 A2-70 CF8M / WCB.4 92.0 119.0 20. ball valve • Three piece.7 15.4 27.6 12.38 0. NPT Tyco reserves the right to change the contents without notice 2"(DN50) .2 35.Utility Ball Valve Range F150 .Three-piece economical ball valves Materials of construction Features No.0 78.5 41.0 32.2 52.7 48.7 27.10 2.0 38.0 42.0 27.40 7.4"(DN100) FE PT Size page 12 PRESSURE IN BAR Socket Weld end PRESSURE IN PSI Threaded end .7 9.50 TEMPERATURE IN °F (°C) ØN1: BSPP. 4408 / 1.Utility Ball Valve Range F170 .S Powder / 50% PTFE SUS316 TFM1600 A2-70 SUS304 SUS304 CF8 / Steel Vinyl SUS304 A2-70 SUS304 CF8 Quantity 1 2* 1 4-6 4-6 2 2 1 1 Set 1 1 2 1 1 1 1 1 1 1 2 1 1 2 4-12 1 1 * Stainless steel welded connectors are CF3M/1. • Seat material options • Antistatic design • Tightness to EN 12266-1.4"(DN100) FE PT PRESSURE IN BAR 1 PRESSURE IN PSI 23 No. CF8M A2-70 SUS304 / S45C PTFE PTFE A276 Type 316 PTFE 50% S. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Body Cap Ball Bolt Bolt Washer Body Gasket Ball Seat Anti-Static Stem V-Ring Stem Packing Thrust Washer Gland Belleville Washer Locking Trigger Fix Plate Lower Stem Seal Compress Ring Upper Stem Seal Stop Bolt Lock Saddle Stem Nut Handle Handle Sleeve Rivet Bolt Nut Triangle Stopper Handle Adapter CF8M / WCB. 1.0619 ASTM A351 Gr.S Powder / 50% PTFE SUS304 SUS301 / WCB1075 SUS304 SUS304 50% S. screwed. rate A Pressure/Temperature chart /4"(DN8) .0619 CF8M / WCB.Three-piece ball valves to ISO 5211 21 20 19 14 18 13 12 22 17 11 16 10 15 9 8 1 7 6 3 24 4 5 2 Sizes DN8-DN80 (1/4”-3”) Features Handle for valve Size DN 100 (4”) Materials of construction • Three-piece swing out design • ISO 5211 top mounting plate • End connections flanged.4409 TEMPERATURE IN °F (°C) Tyco reserves the right to change the contents without notice page 13 .4408 / 1. butt weld or socket weld • Carbon steel or stainless steel bodies • Size range DN15 (1/2”) to DN100 (4”) Full bore • Double stem sealing arrangement • Primary level with patented SEALMASTER™.11/2"(DN40) 2"(DN50) . 1. 8 28.0 17.2 97.0 70.1 90.0 8.0 N/A N/A 4.0 2.90 14.0 123.0 4.0 15.0 6.0 24.60 ØN1: BSPP.0 42.5 9.8 1.0 115.0 18.0 20.24 3.Three-piece ball valves to ISO 5211 T Threaded end Socket weld Butt weld Flange end (PN25/40 F1) Dimensions (mm) Wt(kg) Size DN A B G ØP ØF W Threaded 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 8 10 15 20 25 32 40 50 65 80 100 12.0 18.0 36.0 160.40 1.0 102.5 66.0 18.0 8.04 3.0 165.70 8.0 24.0 26.1 33.0 14.8 13.0 N/A N/A 14.0 9.25 7.0 310.9 85.15 10.0 110.0 165.6 35.0 235.6 12.0 18.62 23.0 160.08 4.8 21.5 12.0 14.6 1.0 124.2 16 16 19 19 29 M5 M5 M5 M5 M6 M6 M8 M8 M10 M10 M10 SW.0 6.0 200.0 75.0 125.0 20.0 12.4 20.8 42.0 0.0 4.90 3.0 5.0 50.0 88.8 1.6 12.9 193.0 50.0 140.0 65.0 122.3 8.0 200.4 24.5 21.0 350.44 0.4 135.0 N/A N/A 16.0 86.44 0.0 83.0 4.0 115.6 61.7 9.9 52.0 290.0 150.8 0.5 68.0 22.0 173.0 200.0 102.9 9.0 150.0 18.96 110.5 17.2 115.7 15.0 42.15 16.0 2.0 102.0 9.44 0.6 48.0 68.3 6.0 70.0 182.0 145.8 1.0 6.0 36.0 500.0 N/A N/A 45.0 1.8 2.0 N/A N/A 65.5 15.1 22 PN25/40 Size DN Ød M H L1 L2 Q t1 T ØU ØX ØY ØZ ØN2 ØN3 Flange 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 4" 8 10 15 20 25 32 40 50 65 80 100 11.5 20.3 13. BSPT.0 9.0 48.0 185.0 138.7 11.0 29.0 162.95 1.90 6.7 27.8 65.9 7.0 135.0 91.0 18.0 32.4 N/A N/A 130.0 28.0 25.3 N/A N/A 2.9 102.0 4.8 0.0 221.0 65.0 230.1 77.0 105.0 18.0 250. NPT N/A = Not Available Tyco reserves the right to change the contents without notice page 14 .80 35.0 200.3 12.0 142.0 170.0 85.1 11.5 71.0 17.0 102.0 18.0 5.0 14.0 135.0 7.0 8.0 42.5 15.0 135.0 58.0 42.0 102.0 180.0 50.0 165. BW 0.0 100.0 160.2 76.1 40.0 250.2 11.0 4.0 22.5 65.Utility Ball Valve Range F170 .0 38.0 18.2 17.0 N/A N/A 95.0 190.0 8.0 96.9 77.0 78.0 24. rate A • Seat material options • Optional castings per AD/WO/TRD-100 are available • Size range DN8 (1/4”) to DN100 (4”) Full and reduced bore Materials of construction PRESSURE IN PSI Features TEMPERATURE IN °F (°C) Reduced Bore Sizes page 15 . 1. 1.0619 CF8M / WCB.0619 ASTM A351 Gr. CF8M A2-70 SUS304 / S45C RPTFE PTFE A276 Type 316 PTFE 50% S. screwed.Three-piece heavy duty ball valves 21 20 22 23 14 19 18 13 12 17 11 16 15 10 9 7 8 6 3 2 4 1 24 5 Handle for valve Size DN 100 (4”) Sizes DN8-DN80 (1/4”-3”) No.S Powder / 50% PTFE SUS316 TFM1600 A2-70 SUS304 SUS304 CF8 / Steel Vinyl SUS304 A2-70 SUS304 ASTM A351 Gr. butt weld and socket weld • Carbon steel and stainless steel bodies • Tightness to EN 12266-1. CF8 Quantity 1 2* 1 4-6 4-6 2 2 1 1 Set 1 1 2 1 1 1 1 1 1 1 2 1 1 2 4-12 1 1 * Stainless steel welded connectors are CF 3M/1. three piece ball valve • Patented “SEALMASTER” stem arrangement • Double stem sealing complies with TA-Luft requirements • ISO 5211 top mounting plate • Blow out proof stem and antistatic design • Fully enclosed bolting for sizes up to DN40 full bore • End connections.S Powder / 50% PTFE SUS304 SUS301 / 1075 SUS304 SUS304 50% S.Utility Ball Valve Range F180 . Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Body Cap Ball Bolt Bolt Washer Ball Seat Body Gasket Anti-Static Stem V-Ring Stem Packing Thrust Washer Gland Belleville Washer Locking Trigger Fix Plate Lower Stem Seal Compress Ring Upper Stem Seal Stop Bolt Lock Saddle Stem Nut Handle Handle Sleeve Rivet Bolt Nut Triangle Stopper Handle Adapter CF8M / WCB.4408 / 1.4408 / 1.4409 Pressure/Temperature charts 1 1/4 "(DN32) ~ 2"(DN50) 2 1/2"(DN65) ~ 3"(DN80) 3"(DN80R) ~ 4"(DN100R) E E TF TF Tyco reserves the right to change the contents without notice 1 1/2"(DN40R) ~ 2 1/2"(DN65R) RP RP TEMPERATURE IN °F (°C) Full Bore Sizes /2"(DN15R) ~ 1 1/4"(DN32R) PRESSURE IN BAR 1 /4"(DN8) ~ 1"(DN25) PRESSURE IN PSI 1 PRESSURE IN BAR • Heavy duty. 0 21.2 21.0 17.65 1.0 193.0 80.6 96.2 W M5 M5 M5 M6 M6 M6 M8 M10 M10 M 115 135 135 165 165 200 200 250 250 t1 0.0 23.5 70.6 60.1 54.0 1.85 1.12 125 6.6 N/A 1.0 36.7 9.82 88 1.9 260 90.1 50.6 5.5 1.6 2.2 22.2 81.9 9.0 6.2 11.1 2.0 ØP 36 36 42 42 50 50 70 70 102 102 ØF W 7.48 173 15.9 54.6 66.0 31.6 0.5 B G 5.5 0.4 N/A N/A 14.0 108.5 16.0 16.65 1.0 42.2 34.6 1.0 20.4 22.7 G 5.2 32.2 71.5 ØN1: BSPP.5 41.42 98 2.0 12.4 89.2 104 101.65 1. BSPT.5 236.6 9.5 0.2 71.0 20.5 1.4 27.0 20.0 22.1 77.7 17.7 17.5 1.0 9.8 140.0 17.2 13.5 38. NPT N/A = Not Available Tyco reserves the right to change the contents without notice ØN3 page 16 136 22.44 .6 96.9 189 61.0 9.02 101 2.0 151 34.7 25.0 14.7 18.2 M M5 M5 M5 M5 M6 M6 M8 M8 M10 M10 t1 115 115 135 135 165 165 200 200 250 250 t2 0.5 22.62 66 0.5 2.65 N/A N/A N/A N/A 2.0 14.2 32.7 27.8 2.6 1.82 4.0 14.0 9.1 105.0 25.2 43.0 117.5 17.0 9.1 H ØR NW 66.0 8.64 L2 L4 ØN2 ØN1: BSPP.0 25.6 109.1 52 50.0 24.0 8.89 9.1 17.5 0.4 57.5 N/A N/A 66 0.8 Wt(kg) RJT 18 12.0 61.32 5.4 57.9 81.4 34.5 38.8 70 63.5 77.8 2.5 0.0 108.7 11.5 N/A N/A 129.7 11.8 65.63 0.5 9.0 ØP 36 42 42 50 50 70 70 102 102 ØF 7.8 38.6 71.3 6.5 1.6 5S 10S N/A N/A 1.6 5.65 1.0 6.5 41.0 2.0 1.55 1.1 182 49.9 7.5 0.0 6.6 71.1 90. NPT N/A = Not Available Reduced Bore Dimensions (mm) Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" DN 15 20 25 32 40 50 65 80 100 Ød 12.4 34 N/A 40 38.0 174.1 N/A N/A 21.0 12.2 25.0 17.60 84 0.76 117 4.0 31.3 9.8 22.0 16.5 66 82 86 98 100 116 125 162.6 1.9 223.5 B 5.0 12.0 41.7 48.4 240.0 49.1 41.0 27.5 20.0 23.3 49.5 85 76.0 1.2 16.0 A 12.Utility Ball Valve Range F180 .7 15.0 28 25.1 70.5 1.2 11.7 18.9 9.6 36.0 25.65 1.5 23.5 0.48 2.63 15. BSPT.2 10.0 9.7 22 19.6 163 43.1 290 115.6 1.5 23.2 25.Three-piece heavy duty ball valves Side view Full bore: DN10 (3/8”) Reduced bore: DN15 (1/2”) Threaded end Socket weld Butt weld Side view Full bore: DN50-DN80 (2”-3”) Reduced bore: DN65-DN100 (2 1/2”-4”) Side view Full bore: DN15-DN40 (1/2”-1 1/2”) Reduced bore: DN20-DN50 (3/4”-2”) SCH#5(FP)/ SCH#10(FP) NW(RP)/ RJT(RP) Full Bore Dimensions (mm) Size 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" DN 8 10 15 20 25 32 40 50 65 80 Ød 11.3 230.0 8.0 142.6 109 117 129 142 174 193 21.4 16.8 38.5 1.8 65.2 16.8 N/A N/A L1 L2 L3 ØN2 ØN3 ØN4 H Wt(kg) 66.2 12.5 0.0 1.8 170.3 42.1 2.3 49.2 27.00 164 9.2 22.0 1.2 259.65 1.3 12.3 42.5 20.7 9.6 t3 L1 NW RJT 1.3 8.08 2.0 A 12.0 2.0 80.1 2.5 1.4 89.0 20.5 0.0 129.8 133 27.7 15.5 0.0 5.7 12.1 50.5 14.5 24.0 22.5 0. 1.S Powder / 50% PTFE SUS316 Grafoil A2-70 SUS304 SUS304 CF8 Vinyl SUS304 Quantity 1 2* 1 8-12 8-12 2 2 1 1 Set 1 1 2 1 1 1 1 1 1 1 2 1 1 2 * Stainless steel welded connectors are CF 3M/1. butt weld and socket weld • Secondary metal to metal seating surface • Fire tested to API 607 4th edition up to DN80 (3”) • Optional castings per AD/WO/TRD-100 are available • Size range DN10 (3/8”) to DN80 (3”) Full and reduced bore • Carbon steel and stainless steel bodies • Tightness to EN 12266-1.4409 Pressure/Temperature charts 1 1/4 "(DN32) ~ 2"(DN50) 2 1/2"(DN65) ~ 3"(DN80) E E Tyco reserves the right to change the contents without notice 3"(DN80R) ~ 4"(DN100R) TF TF Full Bore Sizes 1 1/2"(DN40R) ~ 2 1/2"(DN65R) RP RP TEMPERATURE IN °F (°C) /2"(DN15R) ~ 1 1/4"(DN32R) PRESSURE IN BAR 1 /4"(DN8) ~ 1"(DN25) PRESSURE IN PSI 1 PRESSURE IN BAR • Heavy duty fire tested three piece ball valve • Patented “SEALMASTER” stem arrangement • Double stem sealing complies with TA-Luft requirements • Blow-out proof stem and anti-static design • ISO 5211 mounting plate • End connections.4408 / 1.Three-piece fire tested ball valves No. Part Name Material 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Body Cap Ball Bolt Bolt Washer Ball Seat Body Gasket Anti-Static Stem Stem Packing Thrust Washer Gland Belleville Washer Locking Trigger Fix Plate Lower Stem Seal Compress Ring Upper Stem Seal Stop Bolt Lock Saddle Stem Nut Handle Handle Sleeve Rivet CF8M / WCB.B8 / A193 Gr.Utility Ball Valve Range F180F .S Powder / 50% PTFE SUS304 SUS301 / WCB1075 SUS304 SUS304 50% S.B7 SUS304 RPTFE Grafoil A276 Type 316 Grafoil 50% S. CF8M A193 Gr. 1.0619 CF8M / WCB.4408 / 1. screwed.0619 ASTM A351 Gr. rate A Materials of construction PRESSURE IN PSI Features TEMPERATURE IN °F (°C) Reduced Bore Sizes page 17 . 3 8 8 9.04 6.0 1.6 109 117 129 142 174 193 21.0 1.4 27.2 13.1 0.4 57.72 4.0 80.5 0.4 27.8 22.5 41.40 1.2 71. NPT N/A = Not Available Tyco reserves the right to change the contents without notice page 18 .0 22.2 11.5 1.7 5 6.0 31.8 22.6 71.0 20.5 5.7 9.7 15.5 115 135 135 165 165 200 200 250 250 17.96 2.5 16.9 81.7 18.2 25.2 11.3 6.6 96.7 5 6.9 9.5 70.7 11.1 77.1 77.6 0.88 1.0 12.0 49.0 31.56 N/A N/A ØN1: BSPP.6 9 9 12 12 14 14 24.1 41.0 20.5 1.5 23.6 36.0 1.0 25. BSPT.0 23.7 11.0 25.6 9 9 12 12 14 14 24.7 18.5 17 17 36 42 42 50 50 70 70 102 102 7.2 71.8 38.3 49.0 108.5 0.8 65.2 43.5 20.1 90.5 70.2 M5 M5 M5 M6 M6 M8 M8 M10 66 84 88 98 101 117 125 165 66.0 20.2 16.1 0.0 27. NPT N/A = Not Available Reduced Bore Dimensions (mm) Size DN Ød A B G ØP ØF W H L1 L2 M ØN2 ØN3 t 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 15 20 25 32 40 50 65 80 12.9 81.0 17.9 54.5 41.3 8 8 9.0 16.1 41.3 42.0 49.1 90.5 22.6 36.9 9.0 23.0 20.5 9.Utility Ball Valve Range F180F .3 42.6 71.2 22.8 65. BSPT.3 49.Three-piece fire tested ball valves Side view Full bore: DN10 (3/8”) Reduced bore: DN15 (1/2”) Side view Full bore: DN50-DN80 (2”-3”) Reduced bore: DN65-DN80 (2 1/2”-3”) Side view Full bore: DN15-DN40 (1/2”-1 1/2”) Reduced bore: DN20-DN50 (3/4”-2”) Full Bore Dimensions (mm) Size DN Ød A B G ØP ØF W H L1 L2 M ØN2 ØN3 t Wt(kg) 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 10 15 20 25 32 40 50 65 80 12.0 27.6 109 117 129 142 174 21.5 0.62 0.0 22.2 16.0 61.6 96.5 0.5 38.2 32.9 54.2 16.4 89.0 115 135 135 165 165 200 200 250 22.2 M5 M5 M5 M6 M6 M8 M8 M10 M10 66 84 88 98 101 117 125 165 174 66.5 23.5 20.4 34.6 ØN1: BSPP.4 57.0 61.2 32.7 15.2 25.7 25.5 0.0 1.5 0.0 12.5 0.4 34.4 89.7 9.2 43.5 0.0 16.5 17 36 42 42 50 50 70 70 102 7.0 17.5 0.8 38.5 5.1 50.3 6.5 9.1 50. 12”) Materials of construction No.4408/1.S Powder / 50% PTFE SUS316 TFM1600 PTFE 50% S.2H 50% S. the body & cap material will be 1. Tyco reserves the right to change the contents without notice page 19 .8 / A193 Gr.12”) Handle for valve Features • Two piece.B7+A194 Gr.Utility Ball Valve Range F190 . rate A (2 1/2” . split body ball valve with flanged ends • Carbon steel or stainless steel bodies • Double stem sealing complies with TA-Luft requirements • Patented “SEALMASTER” stem arrangement • Blow-out proof stem • ISO 5211 mounting plate • Anti-static design • Valve pressure rating: ANSI Class 150/300 DIN PN 10/16/25/40 • Locking device • Various seat material options • Investment cast body (DN15 to DN100) • Sand cast body (DN125 to DN300) • Optional castings per AD/WO/TRD-100 are available • Size range DN15 (1/2”) to DN300 (12”) Full bore • Tight shut-off to EN 12266-1. CF8M / ASTM A216 Gr. WCB ASTM A351 Gr. CF8M A276 Type 316 PTFE PTFE A193 Gr.0619.B8+A194 Gr. CF8M / ASTM A216 Gr.DN300 (2 1/2” . Part Name Material 1* 2* 3 4 5 6 7 7a Body Cap Ball Anti-Static Stem Ball Seat Body Seal Flange Bolt (1/2”-2”) Flange Stud & Nut (2 1/2”-12”) Lower Stem Seal Compress Ring Upper Stem Seal V-Ring Stem Packing Thrust Washer Gland Belleville Washer Lock Saddle Stem Nut Stop Bolt Handle (1/2”-2”) Triangle Stopper (2 1/2”-12”) Handle Adapter (2 1/2”-12”) Handle (2 1/2”-12”) Locking Trigger Fix Plate Handle Sleeve Rivet ASTM A351 Gr.S Powder / 50% PTFE SUS304 SUS301 / 1075 SUS304 SUS304 A2-70 CF8 SUS304 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Quantity 1 1 1 1 2 1 4 6-20 1 1 1 1 Set 1 1 2 1-2 1 1 1 1 CF8 (2 1/2”-5”) / FCD 450 (6”-12”) 1 Steel SUS304 SUS304 Vinyl SUS304 1 1 1 1 2 * For DIN valves. WCB ASTM A351 Gr.B8 / A193 Gr.B7 A193 Gr.Split body flanged ball valves Size DN65 . S Powder / 50% PTFE 1 SUS304 1 SUS301 / 1075 2 SUS304 1-2 SUS304 1 A2-70 1 CF8 1 SUS304 1 CF8 (2 1/2”-5”) / FCD 450 (6”-12”) 1 Steel SUS304 SUS304 Vinyl SUS304 1 1 1 1 2 * For DIN valves.4408/1.B7 4 A193 Gr. split body ball valve • Flexible graphite body.B7+A194 Gr.2H 6-20 50% S. rate A . WCB 1 ASTM A351 Gr. CF8M / ASTM A216 Gr. 1* 2* 3 4 5 6 Part Name Body Cap Ball Anti-Static Stem Ball Seat Body Seal 7 7a Flange Bolt (1/2”-2”) Flange Stud & Nut (2 1/2”-12”) Lower Stem Seal Compress Ring Upper Stem Seal Stem Packing Thrust Washer Gland Belleville Washer Lock Saddle Stem Nut Stop Bolt Handle (1/2”-2”) Triangle Stopper (2 1/2”-12”) Handle Adapter (2 1/2”-12”) Handle (2 1/2”-12”) Locking Trigger Fix Plate Handle Sleeve Rivet 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Features Material Quantity ASTM A351 Gr.DN300 (2 1/2” . WCB 1 ASTM A351 Gr. Tyco reserves the right to change the contents without notice page 20 • Double stem sealing complies with TA-Luft requirements • Blow-out proof stem • ISO 5211 mounting plate • Anti-static design • Valve pressure rating: ANSI Class 150/300 DIN PN 10/16/25/40 • Two piece.12”) Materials of construction No.Split body flanged ball valves (2 1/2” . the body & cap material will be 1.B8 / A193 Gr.Utility Ball Valve Range F190F .0619.8 / A193 Gr. seal and stem packing for Hi-temp resistance • Secondary metal to metal seating surface • Fire tested to API 607 4th edition up to 12” (DN300) • Optional castings per AD/WO/TRD-100 are available • Size range DN15 (1/2”) to DN300 (12”) Full bore • Tight shut-off to EN 12266-1.S Powder / 50% PTFE 1 SUS316 1 Grafoil 1 Grafoil 1 Set 50% S.12”) Handle for valve Size DN65 . CF8M 1 A276 Type 316 1 PTFE 2 SS316 Spiral Wound Grafoil (1/2”-4”) + 1 Grafoil (5”-12”) A193 Gr. CF8M / ASTM A216 Gr.B8+A194 Gr. 5 36.7 11.0 17.5 65.0 17.5 41.0 1100 # # 38.4 19.0 22.DN100 (1/2” .0 36.0 23.0 23.0 17.5 53.0 226.DN200 (5” .5 47.0 82.5 41.0 51.0 14.3 6.0 263.5 65.5 20.0 135.0 50.0 495.8”) Sizes DN250 .0 119.0 M5 M5 M6 M6 M8 M8 M10 M10 M10 M10 M12 M12 M16 M16 135.0 800.0 50.0 65.7 9.0 20.0 101.0 495.0 165.0 305.0 25.0 11.0 34.0 40.0 86.0 22.0 172.5 23.0 200.0 82.0 12.6 28.0 17.4”) Sizes DN125 .0 98.6 34.0 16.5 40.Split body flanged ball valves Sizes DN15-DN200 (1/2”-8”) Solid Ball Sizes DN250-DN300 (10”-12”) Cored Cavity Sizes DN15 .2 11.0 102.5 55.5 74.0 165.3 28.0 203.0 281.0 30.0 122.0 42 42 50 50 70 70 102 102 102 102 125 125 140 140 9.0 23.0 595.0 128.0 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 125 125 125 125 170 N/A N/A N/A N/A N/A N/A N/A N/A N/A 447 474 510 570 728 N/A = Not Available Tyco reserves the right to change the contents without notice page 21 .DN300 (10” .0 14.5 17.0 9.5 12.0 30.0 6.2 16.0 200.0 167.2 11.0 82.0 140.3 8.0 8.0 317.0 162.5 9.3 22.12”) Sizes DN125-DN300 (5”-12”) Gear operated Dimensions (mm) Size DN A ØP ØF G B W M H h1 D E 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8" 10" 12" 15 20 25 32 40 50 65 80 100 125 150 200 250 300 18.5 90.9 25.0 197.Utility Ball Valve Range F190/190F .5 42.0 595. 5 520.20 3.0 16.5 127.5 82.0 178.6 1.5 120.0 127.5 647.4 28.7 4 4 4 4 4 4 4 8 8 8 8 12 12 4 4 4 4 8 8 8 8 8 12 12 16 16 11.9 23.9 17.4 28.0 190.2 25.3 450.0 152.20 50 60 78 92 124 124 164 164 270 270 N/A N/A 2.8 89.6 393.4 361.4 25.4 482.6 Wt(kg) 150# 300# 1.40 9.6 1.0 156.7 22.4 16.2 22.80 8.0 73.6 140.6 1.3 47.6 1.5 19.0 22.0 203.9 269.30 21.4 609.2 11.0 19.0 216.0 100.0 16.40 21.2 387.6 1.20 19.08 4.0 300.7 457.5 215.0 444.00 43.6 1.0 40.0 149.0 22.4 342.0 234.00 37.6 31.50 24.0 127.82 2.0 210.0 165.6 1.Utility Ball Valve Range F190/190F .9 241.6 108.2 533.6 30.0 381.4 501.0 105.0 117.2 22.76 16.3 15.4 317.00 18.0 186.0 79.8 ØC ØD Ød 35.0 229.2 14.2 31.2 25.0 165.7 108.90 34.0 279.0 22.72 31.5 89.2 11.0 50.5 229.7 568.34 27.42 6.72 71 100 172 291 423 #: 10” & 12”w / Gear operator DIN PN10/16/25/40 Dimensions (mm) DN Size DN15 DN20 DN25 DN32 DN40 DN50 DN65 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/ 2 " DN80 3" DN100 4" DN125 5" DN150 6" DN200 8" DN250 10" DN300 12" PN 10/16/25/40 10/16/25/40 10/16/25/40 10/16/25/40 10/16/25/40 10/16/25/40 10/16 25/40 10/16 25/40 10/16 25/40 10/16 25/40 10/16 25/40 10 16 25 40 10 16 10 16 ØB L *L N T 65 75 85 100 110 125 145 45 58 68 78 88 102 122 95 105 115 140 150 165 185 115 120 125 130 140 150 170 130 150 160 180 200 230 290 160 138 200 180 310 4 4 4 4 4 4 4 8 8 180 190 210 220 240 250 295 295 310 320 350 355 400 410 158 162 188 220 235 250 270 285 300 340 340 360 375 395 405 445 460 190 350 8 325 400 8 350 480 8 400 600 450 730 8 12 12 12 12 16 18 18 18 18 20 18 22 20 24 20 24 22 26 22 28 24 24 30 34 26 500 850 12 28 212 218 268 268 278 285 320 320 370 378 Øn 14 14 14 18 18 18 18 15 20 25 32 40 50 65 2 2 2 3 3 3 3 18 80 3 18 22 18 26 22 26 22 22 26 30 22 26 22 26 100 3 125 3 150 3 200 3 250 3 300 4 # 10” & 12”w / Gear operator L Dimensions to ISO 5752 Series 27 (DIN 3202 F4/F5) *L Dimensions to ISO 5752 Series 1 (DIN 3202 F1) Tyco reserves the right to change the contents without notice page 22 Wt (kg) F1 F4/F5 2.25 4.6 31.9 17.0 15.50 17.4 28.5 178.5 139.0 22.0 127.0 19.9 431.12 3.10 7.0 65.0 216.6 95.1 23.3 298.70 11.5 20.0 241.0 168.92 32.0 25.5 152.42 3.0 19.0 19.0 Ød f f 1.0 324.0 165.0 16.0 200.0 22.9 25.8 34.60 16.0 22.6 50.0 157.04 5.00 28.6 1.0 19.0 20.18 5.0 254.6 1.0 270.0 305.0 190.36 15.24 4.46 3.0 403.2 15.0 19.Split body flanged ball valves ANSI 150 / 300 Dimensions (mm) Size 1/2" 3/4" 1" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8" 10" 12" DN 15 20 25 40 50 65 80 100 125 150 200 250 300 ØB ØD L N T Øn ØC 150 300 150 300 150 300 150 300 150 300 150 300 60.0 51.0 381.5 381.6 1.0 92.9 36.8 14.22 21.0 19.6 1.5 190.62 7.3 25.6 41.0 125.0 43.0 76.0 117.5 98.9 330.0 150.8 16.9 406.0 200.42 48 57 73 82 98 98 148 148 203 203 233 233 .0 114.48 8.90 49 75 128 215 254 2.0 190.0 190.0 152.0 283.8 66.0 98.0 124.0 279.0 355.5 70.0 250.0 254.2 22.94 10.6 1.00 19. 12”) Class 150 Body rating PRESSURE IN BAR PRESSURE IN PSI Class 300 Body rating T = PTFE C = 25% Carbon filled PTFE R = RPTFE S = 50% SS filled PTFE U = UHMWPE Use Class 150 body rating also for DIN PN10/16 Use Class 300 body rating also for DIN PN25/40 TEMPERATURE IN °F (°C) Tyco reserves the right to change the contents without notice page 23 .DN100 (3” .6”) Class 300 Bo dy rating Class 150 Body rating PRESSURE IN PSI PRESSURE IN BAR PRESSURE IN PSI Class 300 Bo dy rating Class 150 Body rating PRESSURE IN BAR PRESSURE IN PSI Class 150 Body rating PRESSURE IN BAR Class 300 Bo dy rating Class 300 Bo dy rating TEMPERATURE IN °F (°C) TEMPERATURE IN °F (°C) DN200 .Split body flanged ball valves DN15 .DN150 (5” .DN300 (8” .DN65 (1” .2 1/2”) PRESSURE IN PSI PRESSURE IN BAR Class 150 Body rating TEMPERATURE IN °F (°C) TEMPERATURE IN °F (°C) DN80 .3/4”) DN25 .DN20 (1/2” .4”) DN125 .Utility Ball Valve Range F190/190F . SS F 120 .SS F 150 .CS F 180 . Every Tyco Ball Valve is a stalwart barrier against Fugitive Emissions. On top of this arrangement are multiple layers of V-Ring stem packing ②. Explanation of SEALMASTER™ The live loaded SEALMASTER is a combination of 3 components. When tightened.8µm (150 Grit) to reduce seals friction to a minimum.CS F 190F .SS F 180F . It has been specially designed and constructed to prevent line fluid permeation and resultant leakage. material from upper and lower thrust seal extrude between stem and body enclosures. 133M.CS F 170 .SS .SS . components bed in and keep seal performance constant with usage.SS . which provides a primary sealing. (A) a cup and cone PFA/TFE upper thrust seal. • Constant sealing force transmitted to stem (see arrow) and making the stem primary sealing “positive”.CS F 133M . The high performance of Tyco Ball Valves is mainly due to unique SEALMASTER™ ➀ stem seal arrangement. the live loaded stem pulls up and compressing the stem thrust seals.SS . 190 ! Notes 1 SEALMASTER™ 2 V-Ring stem packing 3 Belleville washers  Our extremely high cycle stem sealing design is accomplished by double sealing system.6) for pressure and high vacuum. As rotation continues. (See 1 . this acts as secondary sealing.SS . pressure and temperature fluctuations.CS DN8 1/4” DN10 3/8” DN15 1/2” DN20 3/4” DN25 1” DN32 1 1/4” DN40 1 1/2” DN50 2” • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • SS = Stainless Steel • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • DN65 2 1/2” DN80 3” DN100 4” • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • DN125 5” DN150 6” DN200 8” DN250 10” DN300 12” • • • • • • • • • • • • • • • • • • • • • • CS = Carbon Steel Patented SEALMASTER™ Stem Seal Arrangement . (B) a cup and cone sintered SS316 center load ring and (C) a flat SS/TFE lower thrust seal.Utility Ball Valve Range Availability matrix The following chart indicates models available by size Model F 110 . The surfaces between the bottom of lower thrust seal and top of stem flange are smooth and all rotation occurs between these two surfaces leaving the stem thrust seal “static” to create the best possible seal. " A  B C 1 View 2 View 3 View 4 View 5 View ! 6 View Main features of SEALMASTER™-patented stem seal arrangement • “Multiple” sealings up to 6 areas (see 1 . As this happens.SS F 130M . 180.CS F 138 . 170. • Standard stem finish better than Ra 0.CS F 190 .SS . • Excellent wear resistance on lower thrust seal (50% SS filled PTFE). Tyco reserves the right to change the contents without notice page 24 # $ .Available for Figures 130M.6). A set of Belleville washers ③ automatically and constantly compresses the seals to adjust for wear. • Encapsulated “static” sealing achieved on upper thrust seal.SS .
Copyright © 2024 DOKUMEN.SITE Inc.