Tweco Welding Catalogue 2001

Arc Welding Products & Accessories® Arc Welding Products and Accessories • • • • • Tweco Spray Master MIG Guns Tweco Gold "Eliminator” Guns Tweco Traditional MIG Guns Tweco Weldskill MIG Guns Special Application Guns, Outfits/Kits and Accessories ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ® Spray Master™ Air-Cooled MIG Guns Arc Welding Products & Accessories SPRAY MASTER™ 250 & 350 AMP AIR-COOLED 80% duty cycle, mixed gases • Heavy-duty contact tip and diffuser for improved performance in high heat applications Rated at 80% duty cycle using Argon/CO2 gases Ergonomic handle design reduces welder’s fatigue Simplified direct rear plug for ease of installation Easy to repair and maintain – only 10 parts Optional locking trigger or dual schedule trigger (350 Amp only) Ideal for use with Argon mixed gas for Spray and Pulse welding applications • • • • • • 250 AMP MIG GUN WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO. 1023-1100 1023-1101 1023-1102 1023-1103 1023-1108 WITH MILLER REAR CONNECTION PART NO. MS210-3545 MS212-3545 MS215-3545 MS220-3545 MS225-3545 WITH EURO-KWIK REAR CONNECTION 1023-1125 1023-1126 1023-1127 1023-1133 WIRE & CABLE SIZE MS210X-3545 MS212X-3545 MS215X-3545 MS225X-3545 .035”-.045” .035”-.045” .035”-.045” .035”-.045” .035”-.045” / / / / / 0,9-1,2mm 0,9-1,2mm 0,9-1,2mm 0,9-1,2mm 0,9-1,2mm Wire Wire Wire Wire Wire 10 12 15 20 25 ft. ft. ft. ft. ft. / / / / / 3M 4M 5M 6M 8M Cable Cable Cable Cable Cable STOCK NO. PART NO. 1023-1110 1023-1111 1023-1112 1023-1113 1023-1118 MS210M-3545 MS212M-3545 MS215M-3545 MS220M-3545 MS225M-3545 WIRE & CABLE SIZE .035”-.045” .035”-.045” .035”-.045” .035”-.045” / / / / 0,9-1,2mm 0,9-1,2mm 0,9-1,2mm 0,9-1,2mm Wire Wire Wire Wire 10 12 15 25 WITH LINCOLN REAR CONNECTION ft. / ft ./ ft. / ft. / 3M 4M 5M 8M Cable Cable Cable Cable N/A 1023-1136 N/A N/A N/A MS212L-3545 N/A N/A 350 AMP MIG GUN WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO. WITH MILLER REAR CONNECTION PART NO. 1036-1610 1036-1613 1036-1615 1036-1631 MS310-116 MS312-116 MS315-116 MS315-116DS 1036-1627 MS315-116LC 1036-1612 1036-1616 MS320-116 MS325-116 WITH EURO-KWIK REAR CONNECTION D-2 WIRE & CABLE SIZE 1036-1618 1036-1621 1036-1623 1036-1628 MS310X-116 MS312X-116 MS315X-116 MS315X-116LC 1036-1620 MS325X-116 .045”-1/16” / 1,2-1,6mm Wire .045”-1/16” / 1,2-1,6mm Wire .045”-1/16” / 1,2-1,6mm Wire .045”-1/16” / 1,2-1,6mm Wire w/ Dual Schedule Trigger .045”-1/16” / 1,2-1,6mm Wire w/ Locking Trigger .045”-1/16” / 1,2-1,6mm Wire .045”-1/16” / 1,2-1,6mm Wire STOCK NO. PART NO. Cable Cable Cable Cable 1036-1635 1036-1638 1036-1640 1036-1633 MS310M-116 MS312M-116 MS315M-116 MS315M-116DS 15 ft. / 5M Cable 1036-1629 MS315M-116LC 20 ft. / 6M Cable 25 ft. / 8M Cable 1036-1637 1036-1642 MS320M-116 MS325M-116 10 12 15 15 ft. ft. ft. ft. / / / / 3M 4M 5M 5M WIRE & CABLE SIZE .045”-1/16” / 1,2-1,6mm .045”-1/16” / 1,2-1,6mm .045”-1/16” / 1,2-1,6mm .045”-1/16” / 1,2-1,6mm w/ Locking Trigger .045”-1/16” / 1,2-1,6mm Wire Wire Wire Wire 10 12 15 15 ft. ft. ft. ft. WITH LINCOLN REAR CONNECTION / / / / 3M 4M 5M 5M Cable Cable Cable Cable Wire 25 ft. / 8M Cable N/A 1036-1646 1036-1647 N/A N/A MS312L-116 MS315L-116 N/A N/A N/A Spray Master™ Air-Cooled MIG Guns ® 450 AMP AIR-COOLED 80% duty cycle, mixed gases • • • • • • • Heavy-duty contact tip and diffuser for improved performance in high heat applications Rated at 80% duty cycle using Argon/CO2 gases Ergonomic handle design reduces welder’s fatigue Simplified direct rear plug for ease of installation Easy to repair and maintain – only 10 parts Optional locking trigger or dual schedule trigger Ideal for use with Argon mixed gas for Spray and Pulse welding applications 450 AMP MIG GUN WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO. WIRE & CABLE SIZE PART NO. 1040-1050 1040-1051 N/A MS410-116 MS412-116 N/A 1040-1052 1040-1095 MS415-116 MS415-116DS 1040-1090 MS415-116LC 1040-1053 MS415-116LM 1040-1059 1040-1058 MS420-116 MS425-116 WITH EURO-KWIK REAR CONNECTION 1040-1075 1040-1076 1040-1077 1040-1091 MS410X-116 MS412X-116 MS415X-116 MS415X-116LC 1040-1078 MS415X-116LM 1040-1083 MS425X-116 .045”-1/16” / 1,2-1,6mm Wire 10 ft. / 3M Cable .045”-1/16” / 1,2-1,6mm Wire 12 ft. / 4M Cable .045”-1/16” / 1,2-1,6mm Wire 12 ft. / 4M Cable w/ Dual Schedule Trigger .045”-1/16” / 1,2-1,6mm Wire 15 ft. / 5M Cable .045”-1/16” / 1,2-1,6mm Wire 15 ft. / 5M Cable w/ Dual Schedule Trigger .045”-1/16” / 1,2-1,6mm Wire 15 ft. / 5M Cable w/ Locking Trigger .045”-1/16” / 1,2-1,6mm Wire 15 ft. / 5M Cable w/ MS64H-60LM Long Conductor Tubes .045”-1/16” / 1,2-1,6mm Wire 20 ft. / 6M Cable .045”-1/16” / 1,2-1,6mm Wire 25 ft. / 8M Cable WITH MILLER REAR CONNECTION STOCK NO. PART NO. 1040-1060 1040-1061 1040-1096 MS410M-116 MS412M-116 MS412M-116DS 1040-1062 1040-1097 MS415M-116 MS415M-116DS 1040-1092 MS415M-116LC 1040-1063 MS415M-116LM 1040-1064 1040-1068 MS420M-116 MS425M-116 WIRE & CABLE SIZE .045”-1/16” / 1,2-1,6mm Wire 10 ft. / 3M Cable .045”-1/16” / 1,2-1,6mm Wire 12 ft. / 4M Cable .045”-1/16” / 1,2-1,6mm Wire 15 ft. / 5M Cable .045”-1/16” / 1,2-1,6mm Wire 15 ft. / 5M Cable w/ Locking Trigger .045”-1/16” / 1,2-1,6mm Wire 15 ft. / 5M Cable w/ MS64H-60LM Long Conductor Tubes .045”-1/16” / 1,2-1,6mm Wire 25 ft. / 8M Cable WITH LINCOLN REAR CONNECTION N/A N/A 1040-1072 N/A N/A N/A MS415L-116 N/A 1040-1073 MS415L-116LM N/A N/A GUARANTEED BEST D-3 Arc Welding Products & Accessories SPRAY MASTER™ ® Eliminator® Style MIG Guns Arc Welding Products & Accessories ELC250 COMPACT ELIMINATOR® 250 AMP AIR-COOLED 60% duty cycle, mixed gases • • • • Front and rear spring strain relief and cable support Compact, ergonomic handle design Durable metal jacketed conductor tube Patented, extended life consumables WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO. PART NO. 1028-1104 1028-1108 1028-1112 1028-1120 ELC210-4045 ELC212-4045 ELC215-4045 ELC225-4045 WITH MILLER REAR CONNECTION WIRE & CABLE SIZE .045”-1,2mm .045”-1,2mm .045”-1,2mm .045”-1,2mm Wire Wire Wire Wire 10 12 15 25 ft./3M ft./4M ft./5M ft./8M WITH EURO-KWIK REAR CONNECTION Cable Cable Cable Cable WIRE & CABLE SIZE STOCK NO. PART NO. 1028-1129 1028-1133 1028-1137 N/A XELC210-4045 XELC212-4045 XELC215-4045 N/A WITH LINCOLN REAR CONNECTION N/A N/A .035”-0,9mm Wire 10 ft./3M Cable .035”-0,9mm Wire 12 ft./4M Cable .035”-0,9mm Wire 15 ft./5M Cable 1028-1178 1028-1182 1028-1186 ELC210L-3035 ELC212L-3035 ELC215L-3035 1028-1154 1028-1158 1028-1162 1028-1166 1028-1170 ELC210M-4045 ELC212M-4045 ELC215M-4045 ELC220M-4045 ELC225M-4045 .045”-1,2mm .045”-1,2mm .045”-1,2mm .045”-1,2mm .045”-1,2mm N/A N/A N/A N/A 1028-1195 N/A N/A N/A N/A ELC225L-4045 Wire Wire Wire Wire Wire 10 12 15 20 25 ft./3M ft./4M ft./5M ft./6M ft./8M Cable Cable Cable Cable Cable ELC350 COMPACT ELIMINATOR® 350 AMP AIR-COOLED 60% duty cycle, mixed gases • • • • Front and rear spring strain relief and cable support Compact, ergonomic handle design Durable metal jacketed conductor tube Patented, extended life consumables WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO. PART NO. 1038-1000 1038-1001 1038-1002 ELC310-3545 ELC312-3545 ELC315-3545 WITH MILLER REAR CONNECTION 1038-1050 1038-1051 1038-1052 ELC310M-3545 ELC312M-3545 ELC315M-3545 WIRE & CABLE SIZE .045”-1,2mm Wire 10 ft./3M Cable .045”-1,2mm Wire 12 ft./4M Cable .045”-1,2mm Wire 15 ft./5M Cable WIRE & CABLE SIZE .045”-1,2mm Wire 10 ft./3M Cable .045”-1,2mm Wire 12 ft./4M Cable .045”-1,2mm Wire 15 ft./5M Cable WITH EURO-KWIK REAR CONNECTION STOCK NO. PART NO. N/A N/A 1038-1027 N/A N/A XELC315-3545 WITH LINCOLN REAR CONNECTION N/A N/A 1038-1077 GUARANTEED BEST D-4 N/A N/A ELC315L-3545 2mm .045”-1.2mm ./3M Cable .2mm ./4M ft./5M ft.045”-1./4M Cable ./8M Cable N/A N/A WIRE & CABLE SIZE 1048-1250 1048-1255 1048-1260 1048-1270 N/A ELC410M-3545 ELC412M-3545 ELC415M-3545 ELC420M-3545 N/A ./3M ft.045”-1./8M Cable Cable Cable Cable Cable 1048-1271 ELC425M-116 1/16”-1.2mm Wire 10 ft. 1048-1200 1048-1205 1048-1210 ELC410-3545 ELC412-3545 ELC415-3545 1048-1216 1048-1221 ELC420-116 ELC425-116 WITH MILLER REAR CONNECTION WIRE & CABLE SIZE WITH EURO-KWIK REAR CONNECTION STOCK NO. PART NO.045”-1. mixed gases • • • • Front and rear spring strain relief and cable support Compact.2mm Wire 12 ft./6M Cable 1/16”-1./5M Cable 1048-1225 1048-1230 1048-1235 XELC410-3545 XELC412-3545 XELC415-3545 1/16”-1./8M Cable WITH LINCOLN REAR CONNECTION 1048-1275 1048-1280 1048-1285 N/A 1048-1295 ELC410L-3545 ELC412L-3545 ELC415L-3545 N/A ELC425L-3545 N/A N/A GUARANTEED BEST D-5 Arc Welding Products & Accessories ELC450 COMPACT ELIMINATOR® .045”-1.Eliminator® Style MIG Guns ® 450 AMP AIR-COOLED 60% duty cycle. PART NO. .045”-1.2mm Wire 15 ft.045”-1.2mm Wire Wire Wire Wire Wire 10 12 15 20 25 ft.6mm Wire 25 ft.2mm . extended life consumables WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO.6mm Wire 20 ft.6mm Wire 25 ft. ergonomic handle design Durable metal jacketed conductor tube Patented.045”-1./6M ft. . mixed gases • • • • Front and rear spring strain relief and cable support Articulating conductor tube Durable metal jacketed conductor tube Patented.6mm Wire 15 ft. mixed gases • • • • Front and rear spring strain relief and cable support Articulating conductor tube Durable metal jacketed conductor tube Patented. GUARANTEED BEST D-6 EL615L-332 . WITH EURO-KWIK REAR CONNECTION STOCK NO./5M Cable . extended life consumables WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO.045”-1. 1068-1107 EL612-116 1/16”-1.6 Mig-Guns are furnished with 5” Radius conductor tubes.2mm Wire 20 ft.6mm Wire 12 ft./8M Cable 1048-1190 N/A 1048-1197 EL415L-3545 N/A EL425L-3545 1048-1163 EL415M-116 1/16”-1./5M Cable 1048-1191 EL415L-116 EL650 STANDARD ELIMINATOR® 650 AMP AIR-COOLED 60% duty cycle.045”-1.2mm Wire 15 ft./6M Cable .4mm Wire 15 ft.Eliminator® Style MIG Guns ® Arc Welding Products & Accessories EL450 STANDARD ELIMINATOR® 450 AMP AIR-COOLED 60% duty cycle./8M Cable N/A N/A EL415-564 5/64”-2.6mm Wire 25 ft./5M Cable WITH LINCOLN REAR CONNECTION 1068-1195 Note: All No.2mm Wire 25 ft. PART NO.2mm Wire 15 ft./5M Cable N/A N/A 1048-1114 WITH MILLER REAR CONNECTION WIRE & CABLE SIZE WITH LINCOLN REAR CONNECTION 1048-1162 1048-1170 N/A EL415M-3545 EL420M-3545 N/A ./5M Cable WITH MILLER REAR CONNECTION 1068-1165 EL615M-332 WIRE & CABLE SIZE 3/32”-2.0mm Wire 15 ft. WIRE & CABLE SIZE PART NO. PART NO./4M Cable 1068-1115 EL615-332 3/32”-2.045”-1.4mm Wire 15 ft.045”-1./5M Cable 1048-1140 XEL415-3545 1048-1112 EL415-3545 1048-1126 EL425-116 1/16”-1. extended life consumables WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) WIRE & CABLE SIZE STOCK NO. 9mm Wire 15 ft.2mm Wire 10 ft./3M Cable 1000-1621 X23-10 X35-10 X35-12 X35-15 X45-10 N/A N/A 1000-1131 1000-1132 1000-1133 35-10 35-12 35-15 ./5M Cable 1000-1631 1000-1632 1000-1633 1000-1141 1000-1142 1000-1143 45-10 45-12 45-15 ./5M Cable 1000-1231 1000-1232 1000-1233 L35-10 L35-12 L35-15 GUARANTEED BEST D-7 .035”-0.035”-0./3M Cable N/A N/A 1000-1211 1000-1213 1000-1215 M35-10 M35-12 M35-15 .9mm Wire 10 ft. PART NO.2mm Wire 15 ft. PART NO.045”-1./3M Cable .6mm Wire 10 ft.6mm Wire 10 ft./3M Cable . 1000-1121 23-10 DESCRIPTION WITH EURO-KWIK REAR CONNECTION STOCK NO.9mm Wire 10 ft./4M Cable .023”-0.9mm Wire 15 ft./5M Cable 1000-1641 N/A N/A WITH MILLER REAR CONNECTION DESCRIPTION WITH LINCOLN REAR CONNECTION 1000-1210 M23-10 .2mm Wire 12 ft.Traditional Style MIG Guns ® Arc Welding Products & Accessories MINI-MIG-GUNS 160 AMP AIR-COOLED 60% duty cycle.035”-0./4M Cable .045”-1./4M Cable . mixed gases • • • Neoprene insulated conductor tube Strain relief and cable support Additional lead wires for convenience and service ease GUN ASSEMBLIES WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO.045”-1.9mm Wire 12 ft. .035”-0.023”-0./3M Cable .035”-0.035”-0.9mm Wire 12 ft. /4M ft.035”-0.9mm Wire 10 ft. 1010-1101 110-23 .035”-0./3M ft.035”-0.045”-1./3M ft.9mm Wire 12 ft. NO.9mm Wire 15 ft. .045”-1.Traditional Style MIG Guns ® Arc Welding Products & Accessories NO.035”-0.035”-0.045”-1.035”-0./5M ft.9mm Wire Wire Wire Wire 10 12 15 20 ft.045”-1.023”-0.2mm ./6M Cable Cable Cable Cable WITH MILLER REAR CONNECTION 1010-1131 1010-1133 1010-1135 M110-3035 M112-3035 M115-3035 STOCK NO./4M Cable . 1 MIG-GUNS 180 AMP AIR-COOLED 60% duty cycle./3M Cable 1010-1111 1010-1112 1010-1113 1010-1114 110-3035 112-3035 115-3035 120-3035 ./6M Cable Cable Cable Cable N/A N/A N/A 1010-1124 N/A N/A N/A 120-4045 ./4M ft.9mm . PART NO.9mm ./5M Cable GUARANTEED BEST D-8 PART NO.6mm Wire 10 ft. N/A N/A N/A N/A 1010-1621 1010-1622 1010-1623 N/A X110-4045 X112-4045 X115-4045 N/A DESCRIPTION .9mm .2mm ./3M Cable .2mm Wire Wire Wire Wire 10 12 15 20 ft.1 MIG-GUN ASSEMBLIES WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) DESCRIPTION WITH EURO-KWIK REAR CONNECTION STOCK NO./5M ft.035”-0.2mm . mixed gases • Neoprene insulated quick-change conductor tubes swivels 360 degrees. 045”-1.2mm Wire 10 ft.2mm Wire 10 ft./3M Cable ./3M Cable ./5M Cable 1020-1611 1020-1612 1020-1613 X210-3035 X212-3035 X215-3035 1020-1121 1020-1122 1020-1123 210-4045 212-4045 215-4045 . 1020-1111 1020-1112 1020-1113 210-3035 212-3035 215-3035 .2 MIG-GUN ASSEMBLIES WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO./4M Cable .9mm Wire 10 ft.9mm Wire 12 ft./5M Cable 1020-1140 1020-1142 1020-1144 L210-3035 L212-3035 L215-3035 1020-1131 1020-1133 1020-1135 M210-4045 M212-4045 M215-4045 .045”-1./3M Cable .035”-0.2mm Wire 15 ft.9mm Wire 12 ft./5M Cable N/A N/A GUARANTEED BEST D-9 Arc Welding Products & Accessories NO.2mm Wire 12 ft.2mm Wire 12 ft.Traditional Style MIG Guns ® 200 AMP AIR-COOLED 60% duty cycle./4M Cable .035”-0./4M Cable .9mm Wire 10 ft.035”-0./4M Cable .2mm Wire 15 ft./3M Cable .045”-1.035”-0./5M Cable 1020-1621 1020-1622 1020-1623 X210-4045 X212-4045 X215-4045 WITH MILLER REAR CONNECTION DESCRIPTION WITH LINCOLN REAR CONNECTION 1020-1130 1020-1132 1020-1134 M210-3035 M212-3035 M215-3035 .045”-1.035”-0.045”-1. PART NO. mixed gases • • Metal jacket conductor tube Enhanced direct plug capabilities NO.9mm Wire 15 ft. 2 MIG-GUNS .035”-0. DESCRIPTION PART NO. WITH EURO-KWIK REAR CONNECTION STOCK NO.045”-1.9mm Wire 15 ft. 0mm Wire 15 ft.045”-1./4M Cable 1/16”-1.2mm Wire 15 ft. PART NO./5M Cable N/A N/A WITH MILLER REAR CONNECTION 1030-1130 1030-1133 1030-1136 DESCRIPTION M310-3545 M312-3545 M315-3545 DESCRIPTION . PART NO.6mm Wire 15 ft.045”-1./5M Cable 1030-1601 1030-1602 1030-1603 X310-3545 X312-3545 X315-3545 310-116 312-116 315-116 1/16”-1.2mm Wire 12 ft.2mm Wire 12 ft./3M Cable . 3 MIG-GUNS 300 AMP AIR-COOLED 60% duty cycle.045”-1.6mm Wire 10 ft.045”-1./4M Cable .Traditional Style MIG Guns ® Arc Welding Products & Accessories NO./5M Cable 1030-1611 1030-1612 1030-1613 X310-116 X312-116 X315-116 315-564 5/64”-2.3 MIG-GUN ASSEMBLIES WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO.2mm Wire 10 ft./4M Cable ./3M Cable 1/16”-1.045”-1. 1030-1101 1030-1102 1030-1103 310-3545 312-3545 315-3545 1030-1111 1030-1112 1030-1113 1030-1123 WITH EURO-KWIK REAR CONNECTION STOCK NO. mixed gases • • Metal jacket conductor tube Enhanced direct plug capabilities NO. .6mm Wire 12 ft.2mm Wire 10 ft./3M Cable .045”-1.2mm Wire 15 ft./5M Cable WITH LINCOLN REAR CONNECTION 1030-1140 1030-1143 1030-1146 GUARANTEED BEST D-10 L310-3545 L312-3545 L315-3545 . /5M Cable 1040-1141 1040-1144 1040-1147 L410-116 L412-116 L415-116 5/64”-2./3M Cable .6mm Wire 15 ft./5M Cable N/A N/A 1040-1613 N/A N/A X415-116 410-564 412-564 415-564 5/64”-2.045”-1./4M Cable .6mm Wire 12 ft./3M Cable 5/64”-2.2mm Wire 15 ft./5M Cable 1040-1601 1040-1602 1040-1603 X410-3545 X412-3545 X415-3545 410-116 412-116 415-116 1/16”-1.2mm Wire 12 ft./5M Cable 1040-1140 1040-1143 1040-1146 L410-3545 L412-3545 L415-3545 1040-1131 1040-1134 1040-1137 M410-116 M412-116 M415-116 1/16”-1. 4 MIG-GUNS .6mm Wire 10 ft.0mm Wire 15 ft.Traditional Style MIG Guns ® 400 AMP AIR-COOLED 60% duty cycle.0mm Wire 12 ft./4M Cable 1/16”-1. PART NO./3M Cable 1/16”-1.6mm Wire 10 ft.2mm Wire 10 ft.045”-1. mixed gases • • Metal jacket conductor tube Enhanced direct plug capabilities NO./3M Cable 1/16”-1./3M Cable .045”-1.0mm Wire 15 ft.045”-1./5M Cable N/A N/A WITH MILLER REAR CONNECTION DESCRIPTION WITH LINCOLN REAR CONNECTION 1040-1130 1040-1133 1040-1136 M410-3545 M412-3545 M415-3545 ./5M Cable N/A N/A 1040-1138 M415-564 GUARANTEED BEST D-11 Arc Welding Products & Accessories NO. .4 MIG-GUN ASSEMBLIES WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO./4M Cable .2mm Wire 12 ft.045”-1.6mm Wire 15 ft./4M Cable 5/64”-2.6mm Wire 12 ft. PART NO.0mm Wire 10 ft.2mm Wire 10 ft.2mm Wire 15 ft.045”-1. 1040-1101 1040-1102 1040-1103 410-3545 412-3545 415-3545 1040-1111 1040-1112 1040-1113 1040-1121 1040-1122 1040-1123 DESCRIPTION WITH EURO-KWIK REAR CONNECTION STOCK NO./4M Cable 1/16”-1. 045”-1.4mm Wire 15 ft. mixed gases • • Metal jacket conductor tube with high heat insulation Enhanced direct plug capabilities NO.6mm Wire 15 ft. PART NO./3M ft.2mm Wire 15 ft.6mm 1/16”-1./3M Cable 3/32”-2.045”-1./6M ft.4mm Wire 12 ft./5M ft.6mm 1/16”-1.6mm 1/16”-1.2mm Wire Wire Wire Wire Wire 10 12 15 20 25 ft./8M Cable Cable Cable Cable Cable N/A N/A 1050-1613 N/A N/A N/A N/A X515-116 N/A N/A 1050-1131 1050-1132 1050-1133 510-332 512-332 515-332 3/32”-2.6mm Wire 10 ft./4M ft.045”-1.4mm Wire 15 ft. WITH LINCOLN REAR CONNECTION 1050-1172 M515-3545 ./5M Cable N/A N/A 1050-1161 1050-1167 1050-1173 M510-116 M512-116 M515-116 1/16”-1.045”-1./5M ft.6mm Wire 12 ft.5 Mig-Guns are furnished with 5” Radius conductor tubes.6mm 1/16”-1./3M ft. 5 MIG-GUNS 500 AMP AIR-COOLED 60% duty cycle.6mm Wire Wire Wire Wire Wire 10 12 15 20 25 ft./8M Cable Cable Cable Cable Cable N/A N/A 1050-1111 1050-1112 1050-1113 1050-1114 1050-1115 510-116 512-116 515-116 520-116 525-116 1/16”-1./5M Cable N/A N/A 1050-1175 M515-332 3/32”-2.2mm .4mm Wire 10 ft./3M Cable 1/16”-1.5 MIG-GUN ASSEMBLIES WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) DESCRIPTION WITH EURO-KWIK REAR CONNECTION STOCK NO. DESCRIPTION PART NO.2mm ./5M Cable 1050-1642 L515-332 Note: All No.2mm ./4M Cable 1/16”-1./6M ft./4M ft.Traditional Style MIG Guns ® Arc Welding Products & Accessories NO.2mm .045”-1./4M Cable 3/32”-2. 1050-1101 1050-1102 1050-1103 1050-1104 1050-1105 510-3545 512-3545 515-3545 520-3545 525-3545 ./5M Cable N/A N/A WITH MILLER REAR CONNECTION STOCK NO.045”-1. GUARANTEED BEST D-12 . mixed gases • • Metal jacket conductor tube with high heat insulation Enhanced direct plug capabilities NO.6mm Wire 15 ft. 1060-1207 615-116 WITH MILLER REAR CONNECTION DESCRIPTION 1/16”-1.4mm Wire 15 ft. PART NO. 6 MIG-GUNS 600 AMP AIR-COOLED 60% duty cycle. GUARANTEED BEST D-13 ./5M Cable Note: All No.6 MIG-GUN ASSEMBLIES WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO.Traditional Style MIG Guns ® Arc Welding Products & Accessories NO.6mm Wire 15 ft./5M Cable DESCRIPTION STOCK NO./5M Cable 1060-1232 M615-116 1/16”-1.2mm Wire 15 ft.045”-1./5M Cable 1060-1242 M615-332 3/32”-2.6 Mig-Guns are furnished with 5” Radius conductor tubes. 1060-1227 M615-3545 . PART NO. WM150-10-3035 WM150-12-3035 WM150-15-3035 . N/A N/A . mixed gases • • • • Uses standard Tweco consumables.2mm Wire 12 ft./4M Cable ./3M Cable . New ergonomic handle design./3M Cable .035”-0.045”-1./3M Cable . Three wire cable hose standard.035”-0./5M Cable N/A N/A 1027-1082 welding the world since 1936 D-14 N/A N/A WM250L-15-4045 . 1017-1005 1017-1006 1017-1007 DESCRIPTION PART NO. PART NO./4M Cable .035”-0.9mm Wire 15 ft. Standard three wire cable hose.2mm Wire 10 ft.035”-0.2mm Wire 15 ft. PART NO.9mm Wire 10 ft. DESCRIPTION PART NO./4M Cable .9mm Wire 12 ft./5M Cable 250 AMP AIR-COOLED MIG GUNS 60% duty cycle. WITH EURO-KWIK REAR CONNECTION STOCK NO.2mm Wire 10 ft.045”-1. WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO.045”-1.9mm Wire 12 ft. mixed gases • • • • Uses standard Tweco consumables.045”-1. New ergonomic handle design.9mm Wire 15 ft. Fibre insulated conductor tube./3M Cable .035”-0./5M Cable WITH MILLER REAR CONNECTION DESCRIPTION STOCK NO.2mm Wire 12 ft./4M Cable . Traditional Tweco fiber insulated conductor tube.9mm Wire 12 ft.045”-1.2mm Wire 15 ft.035”-0.035”-0./5M Cable 1027-1055 N/A 1027-1057 WM250X-10-4045 N/A WM250X-15-4045 WITH MILLER REAR CONNECTION 1027-1030 1027-1031 1027-1032 WITH LINCOLN REAR CONNECTION WM250M-10-4045 WM250M-12-4045 WM250M-15-4045 .045”-1. WITH TWECO REAR CONNECTION STOCK NO./4M Cable 1027-1051 WM250X-12-3035 1027-1005 1027-1006 1027-1007 WM250-10-4045 WM250-12-4045 WM250-15-4045 .9mm Wire 10 ft. 1017-1030 1017-1031 1017-1032 WM150M-10-3035 WM150M-12-3035 WM150M-15-3035 .Weldskill™ MIG Guns ® TM Arc Welding Products & Accessories SKILL WELD 150 AMP AIR-COOLED MIG Guns 60% duty cycle. 045”-1./5M Cable N/A N/A WITH MILLER REAR CONNECTION DESCRIPTION PART NO.Weldskill™ MIG Guns ® TM 400 AMP AIR-COOLED MIG GUNS 60% duty cycle.6mm Wire 12 ft.6mm Wire 15 ft.2mm Wire 15 ft./4M Cable . PART NO./4M Cable 1/16”-1.045”-1. 1047-1000 1047-1001 N/A WM400-10-3545 WM400-12-3545 N/A .2mm Wire 15 ft./3M Cable .045”-1./5M Cable N/A 1047-1051 1047-1052 N/A WM400X-12-3545 WM400X-15-3545 1047-1006 1047-1007 WM400-12-116 WM400-15-116 1/16”-1.0mm Wire 15 ft. mixed gases • • • • Uses standard Tweco consumables Traditional Tweco fiber insulated conductor tube New ergonomic handle design Three wire cable hose standard WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) DESCRIPTION WITH EURO-KWIK REAR CONNECTION STOCK NO./4M Cable 1/16”-1./3M Cable ./5M Cable N/A N/A 1047-1077 N/A N/A WM400L-15-3545 1047-1031 1047-1032 WM400M-12-116 WM400M-15-116 1/16”-1.2mm Wire 10 ft.2mm Wire 12 ft.6mm Wire 15 ft. STOCK NO.2mm Wire 10 ft.045”-1./4M Cable . WITH LINCOLN REAR CONNECTION 1047-1025 1047-1026 1047-1027 WM400M-10-3545 WM400M-12-3545 WM400M-15-3545 .2mm Wire 12 ft.6mm Wire 12 ft.045”-1.045”-1./5M Cable 1047-1081 1047-1082 WM400L-12-116 WM400L-15-116 welding the world since 1936 D-15 Arc Welding Products & Accessories SKILL WELD ./5M Cable 1047-1056 1047-1057 WM400X-12-116 WM400X-15-116 1047-1012 WM400-15-564 5/64”-2. 1057-1001 WM500-12-3545 1057-1007 N/A 1057-1017 DESCRIPTION WITH EURO-KWIK REAR CONNECTION STOCK NO.0mm Wire 12 ft./4M Cable 1057-1061 WM500X-12-564 WM500-15-332 3/32”-2. PART NO. GUARANTEED BEST D-16 .6mm Wire 15 ft./5M Cable 1057-1057 WM500X-15-116 N/A 5/64”-2.4mm Wire 15 ft.Weldskill™ MIG Guns ® TM Arc Welding Products & Accessories SKILL WELD 500 AMP AIR-COOLED MIG-GUNS 60% duty cycle. PART NO.5 Mig-Guns are furnished with 5” Radius conductor tubes. mixed gases • • • • Uses standard Tweco consumables Traditional Tweco fiber insulated conductor tube New ergonomic handle design Three wire cable hose standard WITH TWECO REAR CONNECTION (REQUIRES ADAPTER PLUG) STOCK NO.0mm Wire 12 ft.2mm Wire 12 ft. ./5M Cable 1057-1092 WM500L-15-332 Note: All No./4M Cable N/A N/A WM500-15-116 1/16”-1./4M Cable N/A N/A N/A N/A 3/32”-2.045”-1./5M Cable N/A N/A 1057-1036 WM500M-12-564 5/64”-2.4mm Wire 15 ft./5M Cable N/A N/A WITH MILLER REAR CONNECTION DESCRIPTION WITH LINCOLN REAR CONNECTION 1057-1032 WM500M-15-116 1/16”-1.6mm Wire 15 ft. 0-1.6mm SW410SF-116 SW412SF-116 SW415SF-116 1044-1190 1044-1191 1044-1192 welding the world since 1936 D-17 Arc Welding Products & Accessories WATER-COOLED SUPRA-MIG-GUNS® . 1/16” – 1. . . Gun Assemblies with 16S Series Contact Tips Complete 450 Amp Water-Cooled MIG Guns With Tweco Rear Connector Plug Complete 450 Amp Water-Cooled MIG Guns With Euro-Kwik Rear Connection Part Number Stock Number Description Part Number Stock Number SW412-3545 SW415-3545 SW410-116 SW412-116 SW415-116 1044-1151 1044-1152 1044-1155 1044-1156 1044-1157 12’/4m Assy.045” – 1. 1/16” – 1.9mm 15’/5m Assy.6mm 15’/5m Assy. .040-.2mm 15’/5m Assy.035-. Provides maximum service and performance for any given type of welding application.040-.0-1. .2mm SW310X-4045 SW312X-4045 SW315X-4045 1033-1115 1033-1116 1033-1117 With Miller Rear Connection Plug With Retractable Spring Pin Rear Connection Part Number Stock Number Description Part Number Stock Number SW310M-4045 SW312M-4045 SW315M-4045 1033-1130 1033-1131 1033-1132 10’/3m Assy.0-1.040-.6mm 12’/4m Assy.045” – 1.045” – 1. Quick connections make maintenance a snap. .0-1.040-.2mm 12’/4m Assy.6mm N/A N/A SW410X-116 SW412X-116 SW415X-116 N/A N/A 1044-1165 1044-1166 1044-1167 With Miller Rear Connection Plug With Retractable Spring Pin Rear Connection Part Number Stock Number Description Part Number Stock Number SW410M-116 SW412M-116 SW415M-116 1044-1180 1044-1181 1044-1182 10’/3m Assy. Gun Assemblies with 14H Series Contact Tips Complete 300 Amp Water-Cooled MIG Guns With Tweco Rear Connector Plug Complete 300 Amp Water-Cooled MIG Guns With Euro-Kwik Rear Connection Part Number Stock Number Description Part Number Stock Number SW310-4045 SW312-4045 SW315-4045 1033-1105 1033-1106 1033-1107 10’/3m Assy. mixed gases • • • Cool running for maximum efficiency and comfort. 1/16” – 1.8-0.8-0.045” – 1. 1/16” – 1.9mm 10’/3m Assy.2mm 15’/5m Assy.Water-Cooled Supra-MIG-Guns® ® 300 AMP 100% duty cycle. .045” – 0.0-1.045” – 1.045” – 0. .0-1.6mm 15’/5m Assy.045” – 1.2mm SW310SF-4045 SW312SF-4045 SW315SF-4045 1033-1140 1033-1141 1033-1142 WATER-COOLED SUPRA-MIG-GUNS® 450 AMP 100% duty cycle. Quick connections make maintenance a snap. mixed gases • • • Cool running for maximum efficiency and comfort. 1/16” – 1. 1/16” – 1. . Provides maximum service and performance for any given type of welding application.035-.040-.6mm 12’/4m Assy.2mm 12’/4m Assy.040-. Eliminator® Spool Gun ® Arc Welding Products & Accessories Tweco’s new 300 Amp Eliminator ® Spool Gun will provide excellent service and ease of operation for your aluminum welding applications. This dynamic Spool Gun runs 300 amps at 60% duty cycle with mixed gases. ESG -1 STOCK NO.030” (0. Tweco’s Spool Gun also features a copper “jumper” liner to assist with arc start when welding aluminum. The Spool Gun’s wire feed range is 900 inches per minute. we think you’ll like the lightweight design of the Eliminator ® Spool Gun. The gun is available with 25’ or 50’ cable lengths.8mm). 300 Amp Air-Cooled Spool Gun COMPLETE GUN ASSEMBLIES 24 Volt Motors (Requires ESG-1 Control Box) PART NO. To ensure smooth wire feed. ESG225-3545 STOCK NO. It weighs 2.6mm) wire. we’ve added self-centering wire guides and drive rolls for . 1028-1295 DESCRIPTION Control Box Control Box • Pre-Purge Gas Control • Post-Purge Gas Control • Run-in Control D-18 .1/16” (1.8 lbs. Most of all.6m Cable ESG250-3545 1027-1361 Gun Assembly with 50' 15m Cable CONTROL BOX (Used to connect Spool Gun to most welding machines) PART NO. (just over one kilo). The Control Box also provides a run in control for arc starting. • Comfortable Handle Design • Outer Spool Tension Control • Uses Long-Life Eliminator® Consumables • Quick Disconnect Conductor Tube • 1800 Conductor Tube Standard with Optional 450 Tube which Swivels 3600 • 1800 Conductor Tubes Available in Standard 4” and Optional 6” Lengths • Conductor Tube has a Copper Jumper Liner to Assist with Arc Start • Tweco’s Eliminator® Spool Gun fits most welding machines with the use of our ESG-1 Control Box The ESG-1 Control Box provides the gas solenoid with pre-and post-purge gas control. 1027-1360 DESCRIPTION Gun Assembly with 25' 7. stainless steel or mild steel. The Eliminator ® Pull Gun utilizes feeder speed control. we’ve added self-centering wire guides and drive rolls for .1/16” (1.8mm). 25’ or 50’ cable lengths. .6mm) wire. Teflon conduits are standard with the Pull Gun to enhance the quality of your welds. we think you’ll like the lightweight design of the Eliminator ® Pull Gun. To ensure smooth wire feed. EPG225X-3545 1027-1346 DESCRIPTION Gun Assembly with 25' Cable EPG250X-3545 Gun Assembly with 50' Cable 1027-1348 NOTE: Gun Assemblies with Tweco rear connections are shipped with a Miller® and Lincoln® plug. Control Boxes CONTROL BOX (Used to connect Pull Gun to most welding machines) PART NO. 1028-1290 DESCRIPTION Standard Control Box EPG-CR2 1028-1291 Control Box with Pre & Post Purge Gas Control • EPG-CR1 • EPG-CR2 D-19 Arc Welding Products & Accessories Tweco’s new 300 Amp Eliminator ® Pull Gun is available with 15’.32 lbs. We’ve provided repairable cable connections and spring Cablehoz® support to extend the live of your Pull Gun and keep your maintenance down. • Comfortable Handle Design • Uses Long-Life Eliminator ® Consumables • Quick Disconnect Conductor Tube • 180° Conductor Tube Standard with Optional 45° Tube which Swivels 360° • 180° Conductor Tubes Available in 4" and 6" Lengths • Conductor Tube has a Copper Jumper Liner to Assist with Arc Start • Tweco’s Eliminator® Pull Gun fits most welding machines with the use of our EPG-CR1 or EPG-CR2 control box 300 Amp Pull Gun COMPLETE GUN ASSEMBLIES 24 Volt Motors (Requires EPG-CR1 or EPG-CR2 Control Box) TWECO REAR CONNECTION PART NO. STOCK NO. STOCK NO. It weighs 2. EPG215T-3545 1027-1320 DESCRIPTION Gun Assembly with 15' Cable EPG225T-3545 1027-1321 Gun Assembly with 25' Cable EPG250T-3545 1027-1323 Gun Assembly with 50' Cable EURO-KWIK REAR CONNECTION PART NO.Eliminator® Pull Gun ® The Pull Gun runs 300 amps at 60% duty cycle with mixed gases with a wire feed range of 900 inches per minute. too. EPG-CR1 STOCK NO. Most of all.030” (0. (4m) Gun Assy for .045” – 1.0-1.040-. (5m) Gun Assy for .045” – 1. (5m) Gun Assy for 1/16” – 1. (4m) Gun Assy for 1/16” – 1.2mm Wire 12ft.040-.2mm Wire 15ft.040”-.6mm Wire 15ft.2mm Wire 450 Series Smoke Master Guns Complete 450 Amp MIG-Guns with Tweco Connection Part Number S412-116 S415-116 Stock Number 1046-1105 1046-1108 Description 12ft.045” – 1.040-.2mm Wire Complete 250 Amp MIG-Guns with Miller Connection Part Number S210M-4045 S212M-4045 S215M-4045 Stock Number 1026-1105 1026-1106 1026-1107 Description 10ft.6mm Wire 15ft.0-1. mixed gases • • • • Efficiently removes up to 90% of smoke from the welding zone Features Tweco Eliminator® style consumable parts Tough outer jacket made of full length leather for increased flexibility and enhanced cable life Cleaner. more efficient smoke removal 250 Series Compact Smoke Master Guns Complete 250 Amp MIG-Guns with Tweco Connection Part Number S210-4045 S212-4045 S215-4045 Stock Number Description 1026-1100 1026-1101 1026-1102 10ft.2mm Wire 12ft.040”-.0-1.045” – 1.6mm Wire Complete 450 Amp MIG-Guns with Miller Connection Part Number S412M-116 S415M-116 Stock Number 1046-1125 1046-1128 Complete 450 Amp MIG-Guns with Lincoln Connection Description 12ft. (5m) Gun Assy for .0-1.040”-. (5m) Gun Assy for 1/16” – 1.0-1.Smoke Master MIG Guns ® ® Arc Welding Products & Accessories AIR-COOLED SMOKE MASTER® MIG GUNS 250 AND 450 AMP 60% duty cycle.2mm Wire 15ft.045” – 1. (4m) Gun Assy for 1/16” – 1. (4m) Gun Assy for . (3m) Gun Assy for .6mm Wire NOTE: See Tweco’s Smoke Master® Fume Removal System.0-1. (3m) Gun Assy for . D-20 Part Number N/A S415L-116 Stock Number N/A 1046-1138 .045” – 1. Replaceable conduit and four trigger lead wires. Complete Assemblies . ft.4mm) Wire Maximum 350 AMPS Stock Number Model Number 1031-1632 1031-1633 1031-1642 1031-1643 1031-1637 1031-1638 SEFC350-10 SEFC350-15 SEFC350T-10 SEFC350T-15 SEFC350M-10 SEFC350M-15 Description 10 15 10 15 10 15 ft. ft. Standard consumables.3/32" (2. ft. (3m) (5m) (3m) (5m) (3m) (5m) 450A Flux-Cored 450A Flux-Cored 450A Flux-Cored 450A Flux-Cored 450A Flux-Cored 450A Flux-Cored Gun Gun Gun Gun Gun Gun (Lincoln Rear Connection) (Lincoln Rear Connection) (Tweco Rear Connection) (Tweco Rear Connection) (Miller Rear Connection) (Miller Rear Connection) D-21 . ft.1/8" (3.Fluxcored MIG Guns ® Arc Welding Products & Accessories FLUXCORED MIG GUNS 350 & 450 Amp 60% Duty Cycle • • • For use with all gasless wires.2mm) Wire Maximum 450 AMPS Stock Number Model Number 1041-1112 1041-1113 1041-1119 1041-1120 1041-1138 1041-1139 SEFC450-10 SEFC450-15 SEFC450T-10 SEFC450T-15 SEFC450M-10 SEFC450M-15 Description 10 15 10 15 10 15 ft. interchangeable with other leading flux-cored guns. ft. ft. ft. (3m) (5m) (3m) (5m) (3m) (5m) 350A Flux-Cored 350A Flux-Cored 350A Flux-Cored 350A Flux-Cored 350A Flux-Cored 350A Flux-Cored Gun Gun Gun Gun Gun Gun (Lincoln Rear Connection) (Lincoln Rear Connection) (Tweco Rear Connection) (Tweco Rear Connection) (Miller Rear Connection) (Miller Rear Connection) Complete Assemblies . ft. ft. ft. diffuser and nozzle PROFESSIONAL’S CHOICE MIG OUTFITS PART NO. 1028-1386 DESCRIPTION Compact Eliminator MIG Outfit with ELC215M-4045 Gun SKELC215-4045 1028-1385 Compact Eliminator MIG Outfit with ELC215-4045 Gun SKELC415M-3545 1048-1396 Compact Eliminator MIG Outfit with ELC415M-3545 Gun SKELC415-3545 1048-1395 Compact Eliminator MIG Outfit with ELC415-3545 Gun SKM215-4045 1020-1336 Traditional MIG Outfit with M215-4045 Gun SK215-4045 1020-1335 Traditional MIG Outfit with 215-4045 Gun SKM415-3545 SK415-3545 1040-1086 1040-1085 Traditional MIG Outfit with M415-3545 Traditional MIG Outfit with 415-3545 D-22 . Protex Extra coolant • # 2 Weldskill Male Dinse Connector • A starter kit of extra contact tips. 400 Amp Outfits include the following: • Either a Compact Eliminator or Traditional 400 amp 15' MIG gun • Flowmeter with 10' hose • 3/0 Weld Cable with SGC-300 Ground Clamp • 7 oz. 44-116-15 • A starter kit of extra contact tips. SKELC215M-4045 STOCK NO. Protex Extra coolant • # 2 Weldskill Male Dinse Connector • An extra liner. Each gun style is available in either 200 or 400 amp models. Just connect to your welding machine and you're ready to weld! Outfits available in both our Eliminator style MIG guns and Traditional style MIG guns.® Professional’s Choice MIG Outfit Arc Welding Products & Accessories PROFESSIONAL'S CHOICE MIG OUTFITS Now everything a welder needs to get started is included in Tweco's Professional's Choice MIG Outfits. diffuser and nozzle 200/250 Amp Outfits include the following: • Either an Eliminator 250 amp 15' MIG gun or Traditional 200 amp 15' MIG gun • Flowmeter with 10' hose • 1/0 Weld Cable with SGC-300 Ground Clamp • 7 oz. HB23F-10 STOCK NO./3M with Miller® Rear Connection D-23 Arc Welding Products & Accessories MINI-MIG GUN HOBBY KITS ./3M with Thermal Arc® Fabricator® Rear Connection HB23L-10 1000-1102 ./3M with Lincoln® Rear Connection HB35M-10 1000-1101 .6mm Wire 10 ft.023"/0.023"/0. 1000-1105 DESCRIPTION ./3M with Lincoln® Rear Connection HB23M-10 1000-1103 .6mm Wire 10 ft.9mm Wire 10 ft. • • • • Neoprene conductor tubes Strain relief and cable support Additional lead wires for convenience and ease of use Includes rear connection plug for 100 to 180 amp welding machines MINI-MIG GUN HOBBY KITS PART NO.035"/0.6mm Wire 10 ft./3M with Miller® Rear Connection HB35F-10 1000-1106 .9mm Wire 10 ft.035"/0.9mm Wire 10 ft.023"/0.035"/0. (3M) 160 Amp Air-Cooled Mini-MIG Gun kits with rear connections for use with 100-180 amp hobby type welding machines./3M with Thermal Arc® Fabricator® Rear Connection HB35L-10 1000-1100 .Mini-MIG-Gun Hobby Kits ® 10 ft. Part # TMK-350TL (1036-1025) D-24 . Light-weight Guns We’ve packaged two of our hottest selling 15' MIG guns. Tweco’s rugged handles and triggers have a lifetime guarantee.Top Gun MIG Kits ® Arc Welding Products & Accessories INTRODUCING TOP GUN MIG KITS Rugged. 16S-45. • • • • • Tweco®. with the following accessories at no extra charge to you. The heavy duty consumables will give you the performance you need and will last longer than the light-weight consumables. 16S-116 Heavy-duty diffuser: HD54-16 Heavy-duty nozzle: HD24-62 Part # TMK-300 (1030-1125) These light-weight guns are guaranteed to hold up in rugged work environments. Miller® and Lincoln® style rear plugs and control wires 44-116-15 Conduit Three heavy duty 16S contact tips: 16S-35. standard Tweco® # 3 gun and the 350 amp Tuff N Lite gun. PART NO. STOCK NO. STOCK NO. Available with either Gear or Vane pumps. Efficiently removes welding fumes. 50Hz D-25 . Pump by-pass to tank on rotary gear pump keeps pump from overheating. PART NO. STOCK NO. virtually eliminates leakage. Stainless steel construction eliminates coolant contamination due to electrolyte and chemical reactions. DESCRIPTION 4500-1010 TSC-96 120V. 4010-1010 TC900-G 4010-1011 TC900-V 4010-1012 TC900-GX DESCRIPTION Cooler w/Gear Pump 110V-50/60 Hz Cooler w/Vane Pump 110V-50/60 Hz Cooler w/Gear Pump 230V-50/60 Hz Arc Welding Products & Accessories TC 900 WATER COOLER TCV 900 WATER COOLER • • • • • Vertical or horizontal models available. 60Hz 4500-1011 TSC-96X 220V. High efficiency radiator design pulls outside air through radiator Both style pumps are equipped with a bypass to eliminate excessive pump wear. 4010-1035 TCV900-G 4010-1036 TCV900-V DESCRIPTION Cooler w/Gear Pump 110V-50/60 Hz Cooler w/Vane Pump 110V-50/60 Hz TWECO SMOKEMASTER™ Fume Removal System • • • • • Compatible with Tweco Smoke Master® MIG Guns. Stainless steel construction. Molded seamless plastic water tank.Specialty Products & Accessories ® • • • • Designed for MIG guns up to 800 amps and TIG torches up to 500 amps. High efficiency filter. Automatic start-stop function standard. PART NO. Separately air-cooled motor. 2 & 3 N/A EL16T-23 1160-1600 EL16T-30 1160-1601 EL16T-35 1160-1602 EL16T-40 1160-1603 EL16T-45 1160-1604 EL16T-542 1160-1605 EL16T-116 1160-1606 N/A N/A N/A N/A N/A N/A N/A N/A EL16AT-364 1160-1607 EL16AT-116 1160-1608 N/A N/A NO.9mm .6mm .054" 1./METRIC . 4.8mm .082" 2.106" 2.85mm .030" 0.064" 1.08mm EL250.2mm 1/16"AL 1.044" 1.D.66mm .8mm 1/8" 3.2mm 3/64"AL 1. 350.3mm 1/16" 1.6mm 5/64" 2.120" 3.79mm .144" 3.05mm .031" 0.4mm 7/64" 2.045" 1.MIG Welding Consumables ® Arc Welding Products & Accessories ELIMINATOR® STYLE CONTACT TIPS EL16T-35 EL16-35 FOR ELIMINATOR® STYLE AND TRADITIONAL STYLE GUNS EL16-45 ELIMINATOR®STYLE GUNS WIRE SIZE IN. 5 & 6 N/A EL16-30 1160-1610 EL16-35 1160-1611 EL16-40 1160-1612 EL16-45 1160-1613 EL16-52 1160-1615 EL16-116 1160-1616 EL16-564 1160-1618 EL16-332 1160-1619 EL16-764 1160-1620 EL16-18 1160-1621 EL16A-364 1160-1614 EL16A-116 1160-1617 .1 EL11-23 1140-1175 EL11-30 1140-1176 EL11-35 1140-1177 EL11-40 1140-1178 EL11-45 1140-1179 N/A NO.67mm .6mm D-26 TIP I.035" 0.040" 1.65mm . 450 & 600 TAPERED TIP STANDARD TIP EL16T-23 1160-1600 EL16T-30 1160-1601 EL16T-35 1160-1602 EL16T-40 1160-1603 EL16T-45 1160-1604 EL16T-52 1160-1605 EL16T-116 1160-1606 N/A N/A N/A N/A EL16AT-364 1160-1607 N/A N/A EL16-30 1160-1610 EL16-35 1160-1611 EL16-40 1160-1612 EL16-45 1160-1613 EL16-52 1160-1615 EL16-116 1160-1616 EL16-564 1160-1618 EL16-332 1160-1619 EL16-764 1160-1620 EL16-18 1160-1621 EL16A-364 1160-1614 EL16A-116 1160-1617 TRADITIONAL STYLE GUNS MINI & NO. IN.0mm .059" 1.12mm .023" 0.090" 2.038" 0.29mm .97mm .048" 1./METRIC .2mm .37mm .073" 1.0mm 3/32" 2.50mm .22mm .052" 1. 5 Mig-Guns require a 55S style diffuser.082" 2.05mm N/A N/A N/A N/A N/A N/A 15H-764 15HFC-764 1150-1211 1150-1261 16S-764 1160-1111 1/8" 3.038" 0.8mm . TAPERED. & 4 NO.2mm .79mm 11-23 1110-1100 11T-23 1110-1300 14-23 1140-1100 N/A 14T-23 1140-1300 N/A N/A N/A .85mm N/A N/A N/A 14-116 1140-1106 14H-116 1140-1206 14T-116 15H-116 15HFC-116 1140-1306 1150-1206 1150-1256 16S-116 1160-1106 5/64" 2.D.0mm . INCHES/ /METRIC OPTIONAL OPTIONAL STANDARD HEAVY DUTY TAPERED OPTIONAL STANDARD HEAVY DUTY OPTIONAL STANDARD TAPERED RECESS . MINI.0mm . Use 55S-SWL or 55S-HL for 5/32" tip recess. & HEAVY DUTY STYLES TRADITIONAL STYLE 11-23 11H-35 14AH-364 16AS-364 11T-35 16S-35 MS250.6mm .12mm 11-35 11H-35 11T-35 1110-1102 1110-1202 1110-1302 14-35 14H-35 1140-1102 1140-1202 14T-35 15H-35 N/A 1140-1302 1150-1202 16S-35 1160-1102 . 3.22mm 11-40 11H-40 11T-40 1110-1103 1110-1203 1110-1303 14-40 1140-1103 14H-40 1140-1203 14T-40 1140-1303 16S-40 1160-1103 . 2. 6 350A.3mm .67mm N/A N/A N/A N/A N/A N/A 15H-332 15HFC-332 1150-1210 1150-1260 16S-332 1160-1110 7/64" 2.6mm .106" 2.8mm . & NO.9mm .4mm .073" 1.023" 0.2mm .08mm N/A N/A N/A 14AH-116 1140-1214 N/A 15AH-116 15AHFC-116 1150-1214 1150-1264 N/A N/A N/A OPTIONAL 3/8” RECESS MS350/450 & NO.054" 1.044" 1.97mm 11-30 11H-30 11T-30 1110-1101 1110-1201 1110-1301 14-30 1140-1101 N/A 14T-30 1140-1301 N/A N/A N/A .052" 1. NO.064" 1.66mm N/A N/A N/A N/A N/A N/A 15H-18 15HFC-18 1150-1212 1150-1262 16S-18 1160-1112 3/64"AL 1. 1. Use 55S-SW or 55S-H for 3/8 tip recess.031" 0.MIG Welding Consumables ® STANDARD.5 150A & 250A 250A & 400A 500A WELDSKILL STYLE WIRE SIZE INCHES/ METRIC TIP I.600A N/A N/A STANDARD H D TIP 16AS-116 1160-1114 N/A = NOT AVAILABLE ** 16S Tips.65mm N/A N/A N/A 14-52 1140-1105 14H-52 1140-1205 14T-52 15H-52 15HFC-52 1140-1305 1150-1205 1150-1255 16S-52 1160-1105 1/16" 1.29mm N/A N/A N/A 14-564 1140-1109 14H-564 1140-1209 N/A 15H-564 15HFC-564 1150-1209 1150-1259 16S-564 1160-1109 3/32" 2.090" 2.37mm 11-45 11H-45 11T-45 1110-1104 1110-1204 1110-1304 14-45 1140-1104 14H-45 1140-1204 14T-45 15H-45 15HFC-45 1140-1304 1150-1204 1150-1254 16S-45 1160-1104 .120" 3.048" 1.144" 3.030" 0.450A. For tip requirements not shown call Customer Service D-27 Arc Welding Products & Accessories STANDARD CONTACT TIPS FOR TRADITIONAL AND WELDSKILL GUNS .040" 1. See (Diffusers) page 12.6mm .035" 0.50mm N/A 11AH-364 N/A 1110-1213 14A-364 1140-1113 14AH-364 1140-1213 N/A 15AH-364 1150-1213 16AS-364 1160-1113 1/16"AL 1.059" 1.045" 1. When used in No.2mm . 2mm tip recess) (Spray Master) D-28 EL54-SW .7MM 5/8”/15.2mm tip recess) Optional (Slip-On Type) (tip flush) HD24 SERIES NOZZLES (Slip-On Type) MS450 (1/8” / 3.2mm tip recess) EL54-SW N/A N/A EL24I-62H 1260-1631 EL24I-75H 1260-1632 (CT Type) (1/8" / 3.1MM BORE BORE BORE BORE EL22 SERIES NOZZLES EL250 (Slip-On Type) (STANDARD) (1/8" / 3.2mm recess) EL54CT-SW EL24CT-37 1260-1650 EL24CT-50 1260-1651 EL24CT-62 1260-1652 EL24CT-75 1260-1653 Optional (CT Type) (tip flush) EL54CT-SW N/A N/A EL24CT-62F 1260-1667 N/A Optional (CT Type) (tip protruded) EL54CT-SW N/A EL24CT-50P 1260-1701 EL24CT-62P 1260-1702 N/A Optional (CT Type) (1/4" 6.2mm tip recess) EL54CT-SW N/A N/A EL24CT-62H 1260-1657 EL24CT-75H 1260-1658 HD52-11 HD22-37 1220-1305 HD22-50 1220-1306 HD22-62 1220-1307 N/A HD52-11 HD22-37F 1220-1310 HD22-50F 1220-1311 HD22-62F 1220-1312 N/A HD54-16 N/A HD24L-50 1240-1200 HD24L-62 1240-1201 HD24L-75 1240-1202 Optional (Slip-On Type) (tip flush) HD54-16 N/A HD24L-50F 1240-1204 HD24L-62F 1240-1205 HD24L-75F 1240-1206 Optional (Slip-On Type) Heavy Duty (1/8” / 3.9MM 3/4”/19.2mm tip recess) HD54-16 N/A HD24-50 1240-1240 HD24-62 1240-1241 HD24-75 1240-1242 Optional (Slip-On Type) Heavy Duty (tip flush) HD54-16 N/A HD24-50F 1240-1235 HD24-62F 1240-1236 HD24-75F 1240-1237 HD22 SERIES NOZZLES MS250 (Slip-On Type) (Spray Master) (1/8” / 3.MIG Welding Consumables ® Arc Welding Products & Accessories ELIMINATOR® STYLE NOZZLES FOR USE ON ELIMINATOR® STYLE GUNS ONLY EL22I-50 GUN MODEL NOZZLE STYLE FITS DIFFUSER EL22CT-50 3/8”/9.2mm recessed) EL54CT-SW N/A N/A EL24CT-62R 1260-1682 N/A Optional (CT Type) Heavy Duty (1/8" / 3.5MM 1/2”/12.2mm tip recess) (STANDARD & (Optional for No.2mm tip recess) EL450 (STANDARD) Optional (Slip-On Type) (tip flush) EL54-SW N/A N/A EL24I-62F 1260-1618 N/A Optional (Slip-On) Heavy Duty (1/8" / 3.2mm tip recess) (Optional for No. 3 Gun) EL52 EL22I-37 1260-1601 EL22I-50 1260-1602 EL22I-62 1260-1603 EL22I-75 1260-1604 Optional (Slip-On Type) (tip flush) EL52 N/A EL22I-50F 1260-1612 EL22I-62F 1260-1613 N/A Optional (Slip-On Type) (tip protruded) EL52 N/A EL22I-50P 1260-1686 EL22I-62P 1260-1687 N/A EL52CT & EL52CT-16 EL22CT-37 1260-1625 EL22CT-50 1260-1626 EL22CT-62 1260-1627 EL22CT-75 1260-1628 Optional (CT Type) (tip flush) EL52CT & EL52CT-16 N/A EL22CT-50F 1260-1636 EL22CT-62F 1260-1637 N/A Optional (CT Type) (tip protruded) EL52CT & EL52CT-16 N/A EL22CT-50P 1260-1691 EL22CT-62P 1260-1692 EL22CT-75P 1260-1693 Optional (CT Type) (Heavy Duty) EL52CT & EL52CT-16 N/A N/A EL22CT-62H 1260-1629 N/A EL24I-37 1260-1606 EL24I-50 1260-1607 EL24I-62 1260-1608 EL24I-75 1260-1609 EL350 & MS350 (CT Type) (1/8" / 3. 2 Gun) Spray Master) EL24 SERIES NOZZLES (Slip-On Type) (1/8" / 3. 2mm OPTIONAL NOZZLES & INSULATORS FOR ELIMINATOR STYLE GUNS GUN MODEL NOZZLE STYLE EL22I-62FAS FITS DIFFUSER 3/8"/9.9MM BORE 3/4"/19.5MM BORE 5/8”/15.0mm to 1/8”/3.1MM BORE EL54-SW EL54-H N/A N/A N/A EL24I-75FAS 1260-1610 ARC SPOT NOZZLES EL450 & EL600 Flat Arc Spot COARSE THREAD NOZZLE AND INSULATOR 24CT SERIES EL450 & EL600 (Coarse Thread) (1/8” tip recess) EL54CT-SW EL54CT-H 24CT-37-S 1240-1404 24CT-50-S 1240-1414 24CT-62-S 1240-1424 24CT-75-S 1240-1434 (Coarse Thread) (tip flush) N/A N/A 24CT-50-F 1240-1412 24CT-62-F 1240-1422 N/A (Coarse Thread) (1/2” tip recess) “ “ N/A 24CT-62-R 1240-1423 24CT-75-R 1240-1433 N/A 26CT-62 1260-1420 26CT-75 1260-1430 The above nozzles require the following insulator. 3/4’/19. 5/8’/15.MIG Welding Consumables ® FOR ELIMINATOR STYLE GUNS CONTINUED GUN MODEL NOZZLE STYLE FITS BORE DIFFUSER 3/8”/9.7mm bore nozzle.9mm bore nozzle. 5/8’/15.9mm bore nozzle.035/0.1mm bore nozzle for wire sizes 5/64”/2.9mm to 1/16/1.1MM 7/8"/22MM BORE BORE BORE EL26 SERIES NOZZLES No.6mm. 6 (STANDARD)* *EL250 *EL350 *EL450 *EL600 *EL600 furnished furnished furnished furnished furnished Self insulated (3/16” / 19mm tip recess) standard standard standard standard standard with with with with with EL54CT-SW EL54CT-H N/A EL26CT-62 1260-1730 EL26CT-75 1260-1731 N/A 1/2”/12.7MM BORE 5/8"/15.9MM 3/4”/19.5MM BORE 1/2"/12. EL34CT 1340-1430 26CT SERIES EL600 (Coarse Thread) (1/8” tip recess) EL54CT-SW EL54CT-H The above nozzles require the following insulator. N/A EL36CT 1360-1405 D-29 Arc Welding Products & Accessories ELIMINATOR® STYLE NOZZLES .9mm bore nozzle for wire sizes . 5/8’/15. 5MM BORE EL21-50 1/2"/12. 3 EL24 SERIES NOZZLES ELIMINATOR EL450 AND TRADITIONAL NO.7MM 5/8"/15. 6 D-30 Self insulated (3/16" tip recess) EL54CT-SW EL54CT-H N/A EL26CT-62 1260-1730 3/4”/19. 1 (STANDARD CT Type (1/8" tip recess) EL51 EL21-37 1230-1025 EL21-50 1230-1026 EL21-62 1230-1027 N/A (Slip-On Type) (1/8” tip recess) EL52 (Optional for No. 2 ELIMINATOR EL 350 AND TRADITIONAL No.1MM BORE BORE BORE Mini (STANDARD) CT Type (tip flush) EL50 N/A EL21-50F 1230-1031 N/A N/A No.9MM BORE EL26 SERIES NOZZLES TRADITIONAL NO.9MM 3/4"/19. 5 5/8”/15.MIG Welding Consumables ® Arc Welding Products & Accessories ELIMINATOR® STYLE NOZZLES & NOZZLE INSULATORS EL22CT FOR ELIMINATOR® AND TRADITIONAL STYLE GUNS GUN MODEL NOZZLE STYLE EL21 SERIES NOZZLES FITS DIFFUSER 3/8"/9. 4 TRADITIONAL NO. 3 Gun) EL22I-37 1260-1601 EL22I-50 1260-1602 EL22I-62 1260-1603 EL22I-75 1260-1604 Optional (Slip-On Type) (tip flush) EL52 N/A EL22I-50F 1260-1612 EL22I-62F 1260-1613 N/A Optional (Slip-On Type) (tip protruded) EL52 N/A EL22I-50P 1260-1686 EL22I-62P 1260-1687 N/A (CT Type) (1/8" tip recess) (Optional for No. 2 Gun) EL52CT EL22CT-37 1260-1625 EL22CT-50 1260-1626 EL22CT-62 1260-1627 EL22CT-75 1260-1628 Optional (CT Type) (tip flush) EL52CT EL22CT-37F 1260-1635 EL22CT-50F 1260-1636 EL22CT-62F 1260-1637 EL22CT-75F 1260-1638 Optional (CT Type) (tip protruded) EL52CT N/A EL22CT-50P 1260-1691 EL22CT-62P 1260-1692 N/A Optional (CT Type) (Heavy Duty) EL52CT N/A N/A EL22CT-62H 1260-1629 N/A (CT Type) (1/8”recess) EL54CT-SW EL54CT-H EL24CT-37 1260-1650 EL24CT-50 1260-1651 Optional (CT Type) (tip flush) EL54CT-SW EL54CT-H EL24CT-50F 1260-1666 Optional (CT Type) (tip protruded) EL54CT-SW EL54CT-H EL24CT-37F 1260-1665 N/A EL24CT-62 1260-1652 EL24CT-62F 1260-1667 EL24CT-50P 1260-1701 EL24CT-62P EL24CT-75P 1260-1703 1260-1702 Optional (CT Type) (1/4” recessed) EL54CT-SW EL54CT-H EL24CT-37R 1260-1680 EL24CT-50R 1260-1681 EL24CT-62R EL24CT-75R 1260-1682 1260-1683 Optional (CT Type) EL54CT-SW Heavy Duty (1/8" tip recessed) EL54CT-H N/A N/A EL24CT-75H 1260-1658 Optional (Slip-On Type) (1/8" tip recess) EL54-SW EL54-SW EL24I-37 1260-1606 EL24I-50 1260-1607 EL24CT-62H 1260-1657 EL24I-62 1260-1608 Optional (Slip-On Type) (tip flush) EL54-SW EL54-SW EL24I-37F 1260-1616 EL24I-50F 1260-1617 EL24I-62F 1260-1618 Optional (Slip-On Type) (1/4" tip recess) EL54-SW EL54-SW EL24I-50R 1260-1676 EL24I-62R 1260-1677 Optional (Slip-On Type) Heavy Duty(1/8" tip recess) EL54-SW EL54-SW EL24I-37R 1260-1675 N/A EL24I-75F 1260-1619 EL24I-75R 1260-1678 N/A EL24I-62H 1260-1631 EL24I-75H 1260-1632 Optional(Slip-On Type) Heavy Duty (tip flush) EL54-SW EL54-SW N/A N/A EL24I-62HF 1260-1641 EL24I-75HF 1260-1642 EL22 SERIES NOZZLES ELIMINATOR EL250 AND TRADITIONAL No.1MM BORE EL26CT-75 1260-1731 EL24CT-75 1260-1653 EL24CT-75F 1260-1668 EL24I-75 1260-1609 7/8”/22MM BORE EL26CT-87 1260-1732 . 5EL. 5EL.7MM BORE 5/8"/15.MIG Welding Consumables ® FOR TRADITIONAL STYLE GUNS EL22I-62FAS GUN MODEL NOZZLE STYLE FITS DIFFUSER 3/8"/9. N/A EL36CT 1360-1405 D-31 Arc Welding Products & Accessories OPTIONAL ELIMINATOR® STYLE NOZZLES .5MM BORE 1/2"/12. 5EL. & 6EL Flat Arc Spot EL54I-SW EL54I-H N/A N/A N/A EL24I-75FAS 1260-1610 MS350 Spray Master Flat Arc Spot EL52CT-16 N/A N/A EL22I-62FAS N/A COARSE THREAD NOZZLE AND INSULATOR 24CT SERIES No.9MM BORE 3/4"/19. 4EL. EL34CT 1340-1430 26CT SERIES No. 4EL. & 6EL (Coarse Thread) (1/8” tip recess) EL54CT-SW EL54CT-H 24CT-37-S 1240-1404 24CT-50-S 1240-1414 24CT-62-S 1240-1424 24CT-75-S 1240-1434 (Coarse Thread) (tip flush) “ “ N/A 24CT-50-F 1240-1412 24CT-62-F 1240-1422 N/A (Coarse Thread) (1/2” tip recess) “ “ N/A N/A 24CT-62-R 1240-1423 24CT-75-R 1240-1433 N/A 26CT-62 1260-1420 26CT-75 1260-1430 The above nozzles require the following insulator when used with the EL consumable.1MM BORE ARC SPOT NOZZLES No. & 6EL (Coarse Thread) (1/8” tip recess) EL54CT-SW EL54CT-H The above nozzles require the following insulator when used with the EL consumable. 4EL. 5MM BORE 1/2”/12. 150 (1/8” tip recess) 21T-37 22T-37-SS 22-62 23-62-F 23-62 23T-37 3/8”/9.2 WELDSKILL NO.MIG Welding Consumables ® Arc Welding Products & Accessories STANDARD NOZZLES & NOZZLE INSULATORS FOR TRADITIONAL AND WELDSKILL™ STYLE GUNS GUN MODEL NOZZLE STYLE 21 SERIES Mini-Mig-Gun (Self-Insulated) TRADITIONAL (tip flush) INSULATOR “ “ TRADITIONAL (Standard) (Self-Insulated) N/A No.9MM BORE 3/4”/19. 1 (1/8” tip recess) WELDSKILL Optional (Tapered) (Self-Insulated) “ “ NO.7MM BORE 5/8”/15. 250 Optional (Short-Stop) (1/8” tip recess) 32 1320-1100 N/A 22-50 1220-1110 22-62 1220-1120 N/A “ “ 22-37-SS 1220-1301 22-50-SS 1220-1111 22-62-SS 1220-1121 N/A “ “ 22T-37-SS 1220-1522 N/A N/A N/A N/A 23-37 1230-1100 23-50 1230-1110 23-62 1230-1120 23-75 1230-1130 Optional (Self-Insulated) (tip flush) “ “ 23-37-F 1230-1102 23-50-F 1230-1112 23-62-F 1230-1122 23-75-F 1230-1132 Optional (Heavy Duty) (Self-Insulated) (1/8” tip recess) “ “ N/A 23H-50 1230-1210 23H-62 1230-1220 23H-75 1230-1230 Optional (Heavy Duty) (Self-Insulated) (tip flush) “ “ N/A N/A 23H-62-F 1230-1222 N/A Optional (Tapered) (tip flush) 23 SERIES TRADITIONAL (Self-Insulated) No. 3 (1/8” tip recess) Use genuine Tweco parts and consumables to protect the quality of your welds and the life of your gun! D-32 .1MM BORE 21-37-F 1210-1102 21-50-F 1210-1112 21-62-F 1210-1122 N/A 21-37 1210-1100 21-50 1210-1110 21-62 1210-1120 N/A 21T-37 1210-1300 N/A N/A N/A 21T-37-F 1210-1302 (tip flush) 22 SERIES TRADITIONAL (Adjustable) (recess to projection) No. 9MM BORE BORE 3/4”/19.5MM BORE N/A 5/8”/15.5MM BORE 1/2”/12.1MM BORE 7/8”/22MM BORE 26 SERIES TRADITIONAL (Self-Insulated) No.7MM 5/8”/15.MIG Welding Consumables ® FOR TRADITIONAL AND WELDSKILL™ STYLE GUNS GUN MODEL NOZZLE STYLE INSULATOR 24A-62-SS 24A-50 24AH-62 24AT-37-SS 24CT-62-F 25I-75 3/8”/9. 5 (1/8” tip recess) WELDSKILL 500 AMP Optional (Self-Insulated) 1/8” tip recess N/A GUN MODEL NOZZLE STYLE INSULATOR N/A 3/8”/9. 6 1/8” tip recess Optional (Coarse Thread) (1/8” tip recess) N/A N/A N/A N/A 26I-62 1260-1120 26I-75 1260-1130 26I-87 1260-1140 36CT N/A 26CT-62 1260-1420 26CT-75 1260-1430 N/A D-33 Arc Welding Products & Accessories STANDARD NOZZLES & NOZZLE INSULATORS .1MM BORE 24 SERIES 34A 1340-1100 N/A 24A-50 1240-1110 24A-62 1240-1120 24A-75 1240-1130 Optional (Short Stop) (1/8” tip recess) “ “ 24A-37-SS 1240-1101 24A-50-SS 1240-1111 24A-62-SS 1240-1121 24A-75-SS 1240-1131 Optional (SS Tapered) (1/8” tip recess) “ “ 24AT-37-SS 1240-1301 N/A N/A N/A Optional (Heavy Duty) (adjustable) “ “ N/A 24AH-50 1240-1210 24AH-62 1240-1220 24AH-75 1240-1230 Optional (Heavy Duty) (short stop) “ “ N/A 24AH-50-SS 1240-1211 24AH-62-SS 1240-1221 24AH-75-SS 1240-1231 Optional (Coarse Thread) (1/8” tip recess) 34CT 1340-1400 24CT-37-S 1240-1404 24CT-50-S 1240-1414 24CT-62-S 1240-1424 24CT-75-S 1240-1434 Optional (Coarse Thread) (tip flush) “ “ N/A 24CT-50-F 1240-1412 24CT-62-F 1240-1422 N/A Optional (Coarse Thread) (1/2” tip recess) “ “ N/A N/A 24CT-62-R 1240-1423 24CT-75-R 1240-1433 35CT 1350-1400 N/A 25CT-50 1250-1410 25CT-62 1250-1420 25CT-75 1250-1430 25CT-62-F 1250-1421 25I-62 1250-1120 25CT-75-F 1250-1431 25I-75 1250-1130 TRADITIONAL (Adjustable) (recess to projection) No.9MM BORE 3/4”/19. 4 WELDSKILL 400 AMP 25 SERIES TRADITIONAL (Coarse Thread) No. 1 150 AMP NO.5 500 AMP . 3 21-62-FAS 1210-1520 (5/8" Bore) 22-62-FAS 1220-1520 (5/8" Bore) 23-75-FAS 1230-1530 (3/4" Bore) NO.4 400 AMP 24A-62-FAS 1240-1520 (5/8" Bore) 25CT-125-FAS 1250-1560 (1-1/4" Bore) 24A-75-FAS 1240-1530 (3/4" Bore) 25CT-162-FAS 1250-1570 (1-5/8" Bore) 24A-100-FAS 1240-1550 (1" Bore) D-34 NO.MIG Welding Consumables ® Arc Welding Products & Accessories OPTIONAL ARC SPOT . 2 250 AMP NO.NOZZLES FOR TRADITIONAL AND 25CT-125-FAS 21-62-FAS WELDSKILL™ STYLE GUNS TRADITIONAL GUNS WELDSKILL GUNS Flat Arc Spot MINI & NO. 2 35-50 1500-1100 (Standard) 51 1510-1101 (Standard) 52 1520-1101 (Standard) 35-50A 1500-1101 (use with AL Wire) 51-23 1510-1100 (use with . 45-116. 3 & 4 54P 1540-1103 (Standard) NO.023 Wire) 55SW NO. contact Tweco Customer Service for additional information. 500 55SW 1550-1101 (Note:1) 55S-SW 1550-1110 (Note:1) 55S-SWL 1550-1120 (Note:1) 52-23 1520-1100 (Use w/.023 wire) 55 1550-1100 (Note: 2) (Use w/16S tip = 3/8 tip recess) (Note: 5) Use w/16S tips = 1/8 tip recess) (Note:5) 52FN 1520-1102 (use w/No. D-35 Arc Welding Products & Accessories ELIMINATOR® STYLE DIFFUSERS . 45H-764. 45N-116 Note: 3 = 45H-332. 5 & 6 Mig-Guns must be used with conduits as follows: Note: 1 = 45-3545. 2 & 3 EL51 1510-1105 (Standard) EL52 1560-1110 (SLIP ON NOZZLE) EL51-23 1510-1106 (use with . 45H-764. Note: 5 = 16S contact tips are optional. 45N-3545 Note: 2 = 45-564. 45H-18 Note: 4 = All Note 2 & 3 conduits. 45H-18 DIFFUSERS FOR TRADITIONAL STYLE GUNS 51 MINI 52 NO. 3 & 4 nozzles) (Use with 16S tips = 3/8 tip recess) 55S-H 1550-1111 (Note:4) Diffusers for No. 45N-116 Note: 3 = 45H-332. 45-116. 4. 1 EL 52-1 (O-RING) 1560-1108 EL54CT-SW EL 54-H NO. & 6 EL54-SW 1560-1114 (SLIP-ON NOZZLE) (NOTE: 1) EL54CT-SW 1560-1116 (CT NOZZLE) (NOTE: 1) EL54-H 1560-1115 (SLIP ON NOZZLE) (NOTE: 2) EL54CT-H 1560-1117 (CT NOZZLE) (NOTE: 2) EL 54-1 (O-RING) 1560-1118 EL 54-1 (O-RING) 1560-1118 Diffusers for No. 400 54A 1540-1100 (Standard NO. 1 NO. 45H-332. 150 WM51 1510-1110 (Standard) NO. 45N-3545 Note: 2 = 45-564. 5 & 6 Mig-Guns must be used with conduits as follows: Note: 1 = 45-3545.MIG Welding Consumables ® FOR ELIMINATOR OR TRADITIONAL STYLE GUNS MINI-MIG-GUN NO. 5 Mig-Guns must be used with conduits as follows: Note: 1 = 45-3545. 5 NO. 45H-18 Note: 4 = All Note 2 & 3 conduits. 45-116. 250 52 1520-1101 (Standard) NO.023 Wire) EL52CT 1560-1109 (CT NOZZLE) EL 52-1 (O-RING) 1560-1108 EL 52-1 (O-RING) 1560-1108 NO.023 Wire) 55 1550-1100 (Note:2) 55H 1550-1102 (Note:3) (Use with 16S tips = 1/8 tip recess) 55S-HL 1550-1121 56S-H 1560-1101 52FN 1520-1102 (use with No. 45N-116. 45H-764. 3 & 4 nozzle) 55H 1550-1102 (Note:3) 55S-H 1550-1111 (Note:4) 55S-HL 1550-1121 (Note:4) Diffusers for No. DIFFUSERS FOR WELDSKILL STYLE GUNS NO. 45N-3545 Note: 2 = 45-564. 5.6 55SW 1550-1101 (Note:1) 55S-SW 1550-1110 (Note:1) 55S-SWL 1550-1120 (Note:1) 56-SW 1560-110 52-23 1520-1100 (use with . MIG Welding Consumables ® Arc Welding Products & Accessories HEAVY DUTY DIFFUSERS FOR SPRAY MASTER STYLE GUNS 250 AMP HD52-11 1520-1130 D-36 EL 52CT-16 350 AMP EL52CT-16 1560-1107 450 AMP HD54-16 1540-1136 . Guns Only) MS64H-45 1640-1318 (Standard on 25ft. Guns Only) ELIMINATOR® STYLE CONDUCTOR TUBES FOR ELIMINATOR® GUNS ONLY EL600 DEGREE/BEND ELC250 & ELC350 ELC450 & EL450 3” (76MM) RADIUS 45° EL63J-45 1630-1136 EL64J-45 1640-1136 EL66J-45 1660-1206 60° (Standard) EL63J-60 1630-1137 EL64J-60 1640-1137 EL66J-60 1660-1208 Front Insulator (Jacketed Tubes Only) 63ELJ-3 1630-1120 64ELJ-3 1640-1115 66ELJ-3 1660-1835 CONDUCTOR TUBES (OPTIONAL LOCKING NON-ARTICULATING BALL) FOR ELIMINATOR® STYLE GUNS ONLY DEGREE/BEND ELC450 & EL450 60° EL64JL-60 1640-1147 D-37 .MIG Welding Consumables ® Arc Welding Products & Accessories CONDUCTOR TUBES FOR SPRAY MASTER™ MIG GUNS ONLY MS63-60S MS250 & MS350 MS450 MS63-60S 1630-1196 MS64H-60 1640-1319 MS63-45S 1630-1195 (Standard on 25ft. 4 NO.MIG Welding Consumables ® Arc Welding Products & Accessories ELIMINATOR® CONDUCTOR TUBES FOR ELIMINATOR GUNS DEGREE/BEND MINI NO. 5 & 6 5” RADIUS 45° 35-60-45 1600-1101 61-45 1610-1101 N/A N/A N/A N/A 60° (Standard) 35-60-60 1600-1102 61-60 1610-1102 62ELJ-60 1620-1306 63ELJ-60 1630-1116 64ELJ-60 1640-1117 N/A Insulation (Replacement) 35-70 2000-2070 71 2010-2071 64ELJ-3 1640-1115 66ELJ-3 1660-1835 Front Insulator (Jacketed Tubes Only) D-38 N/A 63ELJ-3 1630-1120 . 3 NO. 1 64 ELJ-80 NO. 2 NO. 5 65-4EX Extension 45° 1650-1301 Extension 60° 65-6EX 1650-1302 Extension 80° 65-8EX 1650-1303 NO. 3 & 4 60° For use with Aluminum Wire Flexible Conductor Tube 35-60A-60 1600-1002 35-60-F 1600-1140 Extension 4” 180° Extension 6” 180° Extension 8” 180 64A-4EX 1640-1301 64A-6EX 1640-1302 64A-8EX 1640-1303 NO. Conduits must be replaced When installing conductor tube extensions. 4 NO. 6 5" RADIUS 62J-45 1620-1300 63J-45 1630-1110 64J-45 1640-1105 65J-45 1650-1110 66J-45 1660-1825 62J-60 1620-1301 63J-60 1630-1111 64J-60 1640-1106 65J-60 1650-1111 N/A OPTIONAL STANDARD CONDUCTOR TUBES FOR TRADITIONAL STYLE GUNS MINI-MIG-GUN CONDUCTOR TUBE EXTENSIONS NO. 1 35-60-45 1600-1101 61-45 1610-1101 60° (Standard) 35-60-60 1600-1102 61-60 1610-1102 45° NO. 5 5" RADIUS NO. 3 NO. 2 35-60-60 64A-4EX 61-60 64J-60 64EX-45 65-4EX NO. D-39 Arc Welding Products & Accessories Arc Welding Products & Accessories STANDARD CONDUCTOR TUBES .MIG Welding Consumables ® FOR TRADITIONAL STYLE GUNS DEGREE/BEND MINI NO. 3 & 4 64EX-45 1640-1311 64EX-60 1640-1312 N/A NO. 5 65EX-45 1650-1311 65EX-60 1650-1312 N/A Note: Extensions are designed to fit standard conductor tubes. 400 NO. 400 64EX-45 1640-1311 64EX-60 1640-1312 N/A No. D-40 . 150 NO. 500 65EX-45 1650-1311 65EX-60 1650-1312 N/A Note: Extensions are designed to fit standard conductor tubes.MIG Welding Consumables ® Arc Welding Products & Accessories CONDUCTOR TUBES FOR WELDSKILL STYLE GUNS STANDARD DEGREE/BEND NO. 400 No. 500 5” (127mm) Radius 45° WM150-45 1610-1111 62A-45 1620-1101 64A-45 1640-1101 60° (Standard) WM150-60 1610-1112 62A-60 1620-1102 64A-60 1640-1102 65-45 1650-1101 65-60 1650-1102 OPTIONAL CONDUCTOR TUBE EXTENSIONS No. 500 Extension 4” 180° 64A-4EX 1640-1301 65-4EX 1650-1301 Extension 45° Extension 6” 180° 64A-6EX 1640-1302 64A-8EX 1640-1303 65-6EX 1650-1302 65-8EX 1650-1303 Extension 60° Extension 8” 180° Extension 80° No. 250 NO. Conduits must be replaced when installing conductor tube extensions. 0.8 .035 .9mm 35-40-15 1400-1133 35-40-20 1400-1134 42-3035-15 1420-1113 42-3035-25 1420-1115 N/A N/A N/A N/A .035 AL 35TF-40-10** N/A 0.0 .6mm N/A N/A N/A N/A ** Aluminum wire liners Not recommended for lengths over 10ft.5 X-GUNS) 250/350/400/450 15 ft/5M 25 ft/7.3 .0mm N/A N/A N/A N/A 44-564-15 1440-1123 44-564-25 1440-1125 45-564-15 1450-1123 45-564-25 1450-1125 3/32 2.2mm N/A N/A N/A N/A 44-3545-15 44-3545-25 45-3545-15 1440-1103 1440-1105 1450-1103 45-3545-25 1450-1105 . 1 & 2 (ALL MODELS) 150/250 WELDSKILL WIRE SIZE 15 ft/5M 20 ft/6M 15 ft/5M 25 ft/7.0.6M EL250.6M EL600 NO..6M .2mm N/A N/A N/A N/A N/A 45H-18-15 1450-1153 N/A .1. NO.2mm 1400-1041 42N-3545-15 N/A 1420-1003 44N-3545-15 N/A 1440-1003 45N-3545-15 1450-1003 N/A N/A 44N-116-15 N/A 1440-1012 45N-116-15 1450-1013 N/A 1/16 AL 1. TRADITIONAL.045 0.9 ..040 .023 0.045 1.0 ./3M.040 .MIG Welding Consumables ® (ELIMINATOR®.1.9mm 1400-1031 42N-3545-15 1420-1003 N/A 44N-3545-15 N/A 1440-1003 45N-3545-15 1450-1003 N/A .052 .035 0..1..2mm 45-40-15 1400-1143 45-40-20 1400-1144 42-4045-15 1420-1123 42-4045-25 1420-1125 N/A N/A N/A N/A . 3 & 4 (ALL MODELS & NO.1.8mm N/A N/A N/A N/A N/A N/A 45H-764-15 1450-1143 N/A 1/8 3. 350 & 450 MS350. NO.030 . MS450. SPRAY MASTER AND WELDSKILL™ STYLES) 42-3035-15 ELIMINATOR EL250 PROFESSIONAL MINI-MIG-GUN (ALL MODELS) MS250. 5 & 6 (ALL EXCEPT X-GUNS) 500 15 ft/5M 25 ft/7. D-41 Arc Welding Products & Accessories Arc Welding Products & Accessories WIRE CONDUITS FOR ALL GUNS .8 .1/16 1.4mm N/A N/A N/A N/A N/A N/A 45H-332-15 1450-1133 N/A 7/64 2.6mm N/A N/A N/A N/A 44-116-15 1440-1113 44-116-25 1440-1115 45-116-15 1450-1113 45-116-25 1450-1115 5/64 2.030 .3/64 AL 45TF-40-10** N/A 1.6mm 23-40-15 1400-1123 N/A 42-23-15 1420-1103 N/A N/A N/A N/A N/A . . Robotic MIG Torches & Accessories Quick Tube Robotic Torch Arc Welding Products & Accessories ® . Remember: • QTR designates “Quick Tube Robotic Air-Cooled ” • QTRW designates “Quick Tube Robotic Water-Cooled ” • QTRW-A designates “Quick Tube Robotic Water / Air-Cooled ” NOTE: All the Assemblies in Sections 1 and 2 come with QTR-1. All torches are shipped with 1/16” conduit. Be sure you order the one that fits your feeder. Assemble Your Robotic MIG Torch To Meet Your Specific Needs! D-44 .6MS Standard Tweco Mounting Sleeve as part of the assembly.QTR™ QUICK TUBE ROBOTICS TORCHES & ACCESSORIES Arc Welding Products & Accessories ORDERING INSTRUCTIONS { STEP 1 Choose the appropriate Body & Cable Assembly Refer to Section 1 for Air-Cooled or Section 2 for Water-Cooled models. { Pick the correct Quick Tube STEP 2 Refer to Section 3 to choose the correct Conductor Tube to match the need in your application. Please note there are several rear connector plugs available. Torch Body With 7 ft. Torch Body With 10 ft. Torch Body With 6 ft. Cable Assy. (Stock No. Cable Assy. Torch Body With 9 ft. Cable Assy. (Stock No. (Stock No. Torch Body With 8 ft.)1 QTR-400 (3041-1225) QTR-403 (3041-1226) QTR-404 (3041-1227) QTR-405 (3041-1228) QTR-406 (3041-1229) QTR-407 (3041-1233) QTR-408 (3041-1230) QTR-409 (3041-1234) QTR-410 (3041-1231) – – W/ Tweco #6 Rear Plug Model No. Torch Body With 4 ft. Cable Assy.) N/A W/Panasonic Rear Plug Model No. Torch Body With 3 ft.) N/A W/ Lincoln Rear Plug Model No.) N/A W/ Euro-Kwik Rear Plug Model No.) N/A QTR-603 (3041-1641) QTR-604 (3041-1642) QTR-605 (3041-1643) QTR-606 (3041-1644) N/A QTR-403M (3041-1236) QTR-404M (3041-1237) QTR-405M (3041-1238) QTR-406M (3041-1239) QTR-407M (3041-1243) QTR-408M (3041-1240) N/A N/A N/A N/A QTR-404X (3041-1632) N/A QTR-404L (3041-1727) QTR-405L (3041-1728) QTR-406L (3041-1729) QTR-407L (3041-1730) QTR-408L (3041-1731) QTR-409L (3041-1732) QTR-410L (3041-1733) QTR-412L (3041-1734) QTR-404P (3041-1742) QTR-405P (3041-1743) QTR-406P (3041-1744) QTR-407P (3041-1745) QTR-408P (3041-1746) N/A QTR-608 (3041-1645) N/A QTR-610 (3041-1646) N/A QTR-410M (3041-1241) QTR-412M (3041-1242) N/A N/A N/A N/A QTR-410X (3041-1636) QTR-412X (3041-1637) QTR-410P (3041-1748) N/A May require #4 Adapter Kit May require #6 Adapter Kit Eliminate use of adapter kits which allows direct connection to your feeder. Cable Assy. Torch Body With 5 ft. (Stock No.)2 N/A W/ Miller Rear Plug Model No. Torch Body With 12 ft. (Stock No. Cable Assy. Cable Assy. 1 2 W/ Tweco #4 Rear Plug Model No. Cable Assy.QTR-400 & QTR-600 SERIES AIR-COOLED BODY & CABLE ASSEMBLIES Description Torch Body Without Cable Assy. Cable Assy. (Stock No. D-45 Arc Welding Products & Accessories 600 AMP AIR-COOLED BODY & CABLE ASSEMBLIES SECTION 1 (STEP 1) . D-46 . Torch Body With 6 ft. Torch Body With 3 ft. (Stock No. Cable Assy. Cable Assy.) QTRW-600M (3044-1340) QTRW-603M (3044-1341) QTRW-604M (3044-1342) QTRW-605M (3044-1343) QTRW-606M (3044-1344) N/A With Euro-Kwik Rear Plug Model No. Both models are equipped with a bypass to eliminate excessive pump water.) N/A QTRW-608L (3044-1019) QTRW-609L (3044-1009) N/A N/A QTRW-609P (3044-1738) N/A N/A N/A N/A QTRW-604P (3044-1728) QTRW-605P (3044-1729) QTRW-606P (3044-1730) N/A Requires #6 Adapter Kit WATER COOLERS Tweco® offers two models of stainless steel Water Coolers for use with QTRW and QTRW-A Water-Cooled Torches. Cable Assy. Torch Body With 4 ft.Arc Welding Products & Accessories 600 AMP WATER-COOLED BODY & CABLE ASSEMBLIES SECTION 2 (STEP 1) QTRW-600 SERIES WATER-COOLED BODY & CABLE ASSEMBLIES Description Torch Body Without Cable Assy. Torch Body With 12 ft.) QTRW-600L (3044-1010) QTRW-603L (3044-1011) QTRW-604L (3044-1016) QTRW-605L (3044-1017) QTRW-606L (3044-1018) N/A With Panasonic Rear Plug Model No. Torch Body With 9 ft. Torch Body With 7 ft. Torch Body With 10 ft. Cable Assy. (Stock No. Torch Body With 5 ft. Both Water Cooler models are available with gear pumps or vane pumps.) N/A QTRW-608M (3044-1345) N/A QTRW-608X (3044-1745) N/A QTRW-610M (3044-1346) QTRW-612M (3044-1347) QTRW-610X (3044-1746) QTRW-612X (3044-1747) QTRW-603X (3044-1741) QTRW-604X (3044-1742) QTRW-605X (3044-1743) QTRW-606X (3044-1744) N/A With Lincoln Rear Plug Model No. Torch Body With 8 ft.)1 QTRW-600 (3044-1040) QTRW-603 (3044-1041) QTRW-604 (3044-1042) QTRW-605 (3044-1043) QTRW-606 (3044-1044) QTRW-607 (3044-1048) QTRW-608 (3044-1045) QTRW-609 (3044-1049) QTRW-610 (3044-1046) QTRW-612 (3044-1047) With Miller Rear Plug Model No. (Stock No. 1 WIth Tweco #6 Rear Plug Model No. Cable Assy. Model number TC900 is used for horizontal installations and TCV900 may be used for both horizontal and vertical installations. All coolant passes through the radiator for more efficient cooling. Cable Assy. Cable Assy. Cable Assy. (Stock No. (Stock No. Cable Assy. QTRW-A 400/600 SERIES WATER/AIR-COOLED BODY & CABLE ASSEMBLIES QTRW-A 400 With Euro-Kwik Rear Plug Model No. QTRWA-403X (3044-1675) QTRWA-404X (3044-1676) QTRWA-405X (3044-1677) QTRWA-406X (3044-1678) QTRWA-407X (3044-1683) QTRWA-408X (3044-1679) QTRWA-410X (3044-1680) QTRWA-412X (3044-1681) N/A QTRWA-404M-IBS (3044-1833) N/A N/A N/A N/A N/A N/A N/A N/A N/A QTRWA-410M-IBS (3044-1838) N/A N/A Description Torch Body With 3 ft. Cable Assy. Torch Body With 4 ft. Cable Assy. Torch Body With 5 ft. Cable Assy. Torch Body With 6 ft. Cable Assy. Torch Body With 7 ft. Cable Assy. Torch Body With 8 ft. Cable Assy. Torch Body With 10 ft. Cable Assy. Torch Body With 12 ft. Cable Assy. Torch Body With 3 ft. Cable Assy. with inch switch Torch Body Wi.th 4 ft. Cable Assy. with inch switch Torch Body With 5 ft. Cable Assy. with inch switch Torch Body With 6 ft. Cable Assy. with inch switch Torch Body With 7 ft. Cable Assy. with inch switch Torch Body With 8 ft. Cable Assy. with inch switch Torch Body With 10 ft. Cable Assy. with inch switch Torch Body With 12 ft. Cable Assy. with inch switch 1 QTRW-A 600 WIth Tweco #6 Miller, and Lincoln Rear Plug1 QTRWA-403 (3044-1642) QTRWA-404 (3044-1643) QTRWA-405 (3044-1644) QTRWA-406 (3044-1645) QTRWA-407 (3044-1649) QTRWA-408 (3044-1646) QTRWA-410 (3044-1647) QTRWA-412 (3044-1048) N/A N/A WIth Tweco #6 Miller, and Lincoln Rear Plug1 QTRWA-603 (3044-1650) QTRWA-604 (3044-1651) QTRWA-605 (3044-1652) QTRWA-606 (3044-1653) QTRWA-607 (3044-1657) QTRWA-608 (3044-1654) QTRWA-610 (3044-1655) QTRWA-612 (3044-1656) QTRWA-603-IS (3044-1850) QTRWA-604-IS (3044-1851) QTRWA-605-IS (3044-1852) QTRWA-606-IS (3044-1853) QTRWA-607-IS (3044-1854) QTRWA-608-IS (3044-1855) QTRWA-610-IS (3044-1856) QTRWA-612-IS (3044-1857) With Euro-Kwik Rear Plug Model No. QTRWA-603X (3044-1665) QTRWA-604X (3044-1666) QTRWA-605X (3044-1667) QTRWA-606X (3044-1853) QTRWA-607X (3044-1669) QTRWA-608X (3044-1670) QTRWA-610X (3044-1671) QTRWA-612X (3044-1672) QTRWA-603X-IS (3044-1875) QTRWA-604X-IS (3044-1876) QTRWA-605X-IS (3044-1877) QTRWA-606X-IS (3044-1878) QTRWA-607X-IS (3044-1879) QTRWA-608X-IS (3044-1880) QTRWA-610X-IS (3044-1881) QTRWA-612X-IS (3044-1882) Other plugs are available and may require the use of adapter kits. #4 rear plugs available for use with 44 series conduit. QTRW-A Torches & Cable Assemblies Water-Cooled Torches with Air-Cooled Cable Assemblies • Available in 400 & 600 amp models • Allows for a tighter connection and better current control. No more water leaks. • Air-cooled cable assemblies are more flexible than water-cooled cable assemblies. • Less wear and tear on water coolers and torches. • Most 400 amp and 600 amp torches ship with three # 6 rear plugs: Tweco, Miller, and Lincoln. Other plugs available with adapter kits. Some models available with Euro-Kwik rear plugs. • 45 series liners are standard. # 4 rear plug available for use with 44 series liners. • Some models available with inch switch/Smartac • Torches are shipped without consumables. D-47 Arc Welding Products & Accessories 400/600 AMP WATER/AIR-COOLED BODY & CABLE ASSEMBLIES SECTION 2 (STEP 1) AIR-COOLED CONDUCTOR TUBES SECTION 3 (STEP 2) Arc Welding Products & Accessories QTR-66 SERIES AIR-COOLED CONDUCTOR TUBES The dimensions shown above are typical for the air-cooled conductor tube assemblies. 600 AMPERE AIR-COOLED CONDUCTOR TUBES 18˚ 22˚ 45˚ 60˚ 180˚ 22˚L 45˚L 180˚L PART NO. QTR66-18 QTR66-22 QTR66-45 QTR66-60 QTR66-180 QTR66-22L QTR66-45L QTR66-180L STOCK NO. 1686-1840 1686-1841 1686-1842 1686-1843 1686-1844 1686-1845 1686-1847 1686-1846 NOTE: All conductor tube assemblies are shipped without consumable parts to allow you to order the diffuser, nozzle and contact tip style that best suits your job. D-48 WATER-COOLED CONDUCTOR TUBES SECTION 3 (STEP 2) The dimensions shown above are typical for the water-cooled conductor tube assemblies. 300 AMPERE WATER-COOLED CONDUCTOR TUBES PART NO. STOCK NO. 18˚ 22˚ QTRW63-18 QTRW63-22 1636-1125 1636-1126 22˚L 45˚ QTRW63-22L QTRW63-45 1636-1127 1636-1128 45˚L 60˚ 180˚ 180˚L QTRW63-45L QTRW63-60 QTRW63-180 QTRW63-180L 1636-1129 1636-1130 1636-1131 1636-1132 NOTE: All conductor tube assemblies are shipped without consumable parts to allow you to order the diffuser, nozzle and contact tip style that best suits your job. D-49 Arc Welding Products & Accessories QTRW-63 SERIES WATER-COOLED CONDUCTOR TUBES WATER-COOLED CONDUCTOR TUBES SECTION 3 (STEP 2) Arc Welding Products & Accessories QTRW-64 & QTRW-66 SERIES WATER-COOLED CONDUCTOR TUBES The dimensions shown above are typical for the water-cooled conductor tube assemblies. 400 AMPERE WATER-COOLED CONDUCTOR TUBES 18˚ PART NO. QTRW64-18 STOCK NO. 1646-1700 22˚ 45˚ QTRW64-22 QTRW64-45 1646-1701 1646-1702 60˚ 180˚ 22˚L QTRW64-60 QTRW64-180 QTRW64-22L 1646-1703 1646-1704 1646-1705 45˚L 180˚L QTRW64-45L QTRW64-180L 1646-1707 1646-1706 600 AMPERE WATER-COOLED CONDUCTOR TUBES 18˚ PART NO. QTRW66-18 STOCK NO. 1663-1700 22˚ 45˚ QTRW66-22 QTRW66-45 1663-1701 1663-1702 60˚ 180˚ 22˚L QTRW66-60 QTRW66-180 QTRW66-22L 1663-1703 1663-1704 1663-1705 45˚L 180˚L QTRW66-45L QTRW66-180L 1663-1707 1663-1706 NOTE: All conductor tube assemblies are shipped without consumable parts to allow you to order the diffuser, nozzle and contact tip style that best suits your job. D-50 4MS 2086-2626 Motoman Mount Sleeve 2.89” (48mm) QTR-AVMS 2086-2628 1.0” (50.73” (44mm) QTR-1.3mm) QTR-1.415” (36mm) QTR-1.5mm) QTR-1.75” (44. D-51 .0MS 2086-2627 ABB Laser Mount Sleeve 1. Mounting sleeves can be removed easily by unscrewing 3 alignment screws.6MSR 2086-2631 Binzel Mount Sleeve 1.TORCH MOUNTING SLEEVES SECTION 4 (STEP 3) Arc Welding Products & Accessories QTR SERIES TORCH MOUNTING SLEEVES Description Diameter Model No.625” (41. 1.73DMS 2086-2630 Standard Tweco Mount Sleeve General Mount Sleeve Dinse Mount Sleeve Assure positive alignment with Tweco’s Mounting Sleeves. Alignment screws are screwed into mounting sleeve through insulating case and are seated into insulated pocket within the torch body.8mm) QTR-2. Stock No.75MS 2086-2629 1. 8mm N/A N/A N/A N/A 45H-764-15 1450-1143 1/8“ 3.6mm 44-116-8 1440-1318 44-116-15 1440-1113 5/64“ 2. .0mm N/A N/A N/A N/A 45-564-15 1450-1123 3/32“ 2.045 0.2mm N/A N/A 44N-3545-15 1440-1003 400 Series Water & 600 Series AIR-COOLED & WATER-COOLED WIRE 1 FOOT LONG 8 FEET LONG 15 FEET LONG Inches Millimeters Part No. Stock No.WIRE CONDUITS Arc Welding Products & Accessories 44-3545-15 44N-3545-15 45-3545-15 400 Series AIR-COOLED – ALL EURO-KWIK GUNS WIRE 8 FEET LONG 15 FEET LONG Inches Millimeters Part No.9mm/1.045 0.6mm 45N-116-1 1450-1371 N/A N/A 45N-3545-15 1450-1003 45N-116-15 Use genuine Tweco® parts and consumables to protect the quality of your welds and the life of your torch. Part No.0mm N/A N/A 44-564-15 1440-1123 3/64“ AL 1.035/.6mm N/A N/A 45-116-8 1450-1318 45-116-15 1450-1113 5/64“ 2. Stock No. Part No.2mm 44-3545-8 1440-1308 44-3545-15 1440-1103 1/16“ 1. D-52 1450-1013 . Stock No. Stock No.2mm N/A N/A N/A N/A 45-18-15 1450-1153 3/64“ AL 1.9mm/1.035/. Stock No. Part No.4mm 45H-332-1 1450-1331 N/A N/A 45H-332-15 1450-1133 7/64“ 2.2mm N/A N/A N/A N/A 1/16“ AL 1.2mm N/A N/A 45-3545-8 1450-1308 45-3545-15 1450-1103 1/16“ 1. . 7mm .6mm 1.2mm 1/16” 1.035” .040” 1. Wire Size EL11-35 1140-1177 EL11-40 1140-1178 EL11-45 1140-1179 .062” 1.035” 0.1mm .035” 0.2mm 1/16” 1.9mm STANDARD COPPER CONTACT TIPS Wire Size Part No.6mm .048” 1. .2mm . D-53 Arc Welding Products & Accessories 16RZT-45 .3mm 1. Part No.045” .2mm 1. Stock No. .3mm 1/16” . Part No.3mm 1.040” .073” 16RZ-116 1160-1184 1.041” EL16RZ-35 1160-1730 1.045” .3mm .21mm .0mm 1.054” EL16RZ-45C 1160-1735 1.046” 16RZT-40 1160-1191 1.1mm .068” 16RZT-116-68 1160-1196 1.045” .6mm EL11 Series Tips are for use with QTRW63 Conductor Tubes and are available in standard copper tips only.2mm 1.054” 16RZT-45C 1160-1195 1. . Part No.6mm 1.054” EL16RZT-45C 1160-1710 1.9mm CHROME ZIRCONIUM TAPERED CONTACT TIPS Part No.0mm 1.041” EL16RZT-35 1160-1705 1.046” 16RZ-40 1160-1181 1.068” EL16RZT-116-68 1160-1711 1. . Stock No.3mm .4mm .0mm . Part No.041” 16RZT-35 1160-1189 1.045” .6mm Tip ID.9mm Wire Size .2mm 1. Stock No.073” 16RZT-116 1160-1194 1.9mm .5mm .2mm 1.052” 1.2mm .051” 14RZ-45 1140-1432 1.054” 14RZ-45C 1140-1435 1.062” .2mm 1/16” 1.058” EL16RZ-52 1160-1733 1.068” 16RZ-116-68 1160-1186 1.5mm .052” 1.4mm .1mm .073” 1.9mm Use genuine Tweco parts and consumables to protect the quality of your welds and the life of your torch.052” 1.040” 1.7mm .045” 1.7mm .5mm . .045” 1.1mm .046” EL16RZ-40 1160-1731 1.058” 16RZT-52 1160-1193 1.044” 0.4mm .CONTACT TIPS 14RZ-45 EL16RZ-45 CHROME ZIRCONIUM CONTACT TIPS Wire Size .054” 16RZ-45C 1160-1185 1.062” 1.34mm Wire Size Tip ID.041” 14RZ-35 1140-1430 0.6mm 1.035” .058” 16RZ-52 1160-1183 1.3mm .046” EL16RZT-40 1160-1706 1.3mm .4mm .045” 1.2mm .058” 14RZ-52 1140-1433 1.040” .4mm .1mm .9mm 1.5mm .2mm .4mm . Stock No.051” EL16RZT-45 1160-1707 1.9mm . Stock No.6mm .051” EL16RZ-45 1160-1732 1.0mm .2mm .045” 1.045” 1.045” .046” 14RZ-40 1140-1431 1.7mm .045” 1.058” EL16RZT-52 1160-1708 1.052” .068” EL16RZ-116-68 1160-1736 1.051” 16RZT-45 1160-1192 1.11mm .040” 1.0mm .7mm .035” 0. .9mm 1.9mm 1.041” 16RZ-35 1160-1180 0.0mm 1.9mm . Tip ID.073” EL16RZT-116 1160-1709 1.9mm EL16RZ-116 1160-1734 Wire Size Tip ID.6mm 1.2mm .062” 1.6mm .5mm .040” . Stock No.3mm 1/16” .4mm .035” .052” .054” 1.2mm 1.6mm Tip ID.068” 14RZ-116-68 1140-1436 1.073” 14RZ-116 1140-1434 1.051” 16RZ-45 1160-1182 1. Tip ID.2mm .062” .2mm . Stock No. Use this diffuser with 14RZ Series Contact Tips. Part No. Part No. Use genuine Tweco parts and consumables to protect the quality of your welds and the life of your torch.DIFFUSERS Arc Welding Products & Accessories QTREL54-SW QTR56-SW WC53-EL QTRW56-SW AIR-COOLED TORCHES AIR-COOLED TORCHES Part No. Stock No. Stock No. EL51 1510-1105 WC53-EL 1525-1140 WC56-EL-SW 1560-1146 QTRW542 1544-1125 WC56-EL-H 1560-1147 QTRW54-16 1544-1126 QTRW56-SW1 1564-1125 QTRW56-H 1564-1126 1 1 2 Use this diffuser with 16RZ Series Contact Tips. D-54 . QTREL54-SW 1564-1130 QTREL54-H 1564-1131 QTR56-SW 1560-1125 QTR56-H1 1560-1126 1 WATER-COOLED TORCHES 300 AMP WATERCOOLED TORCHES 400 AMP WATERCOOLED TORCHES 600 AMP WATERCOOLED TORCHES Part No. Stock No. RWC24-37 1240-1330 RWC24-37F 1240-1340 RWC24-37P 1240-1335 Part No. REL24-62F Stock No. Stock No. Part No.7mm” REL24CT-50 Stock No. “9. D-55 Arc Welding Products & Accessories RWC24-50 .1mm” REL24CT-75 1240-1305 Part No.9mm” REL24CT-62 “19. 1240-1307 RWC24-75 1240-1333 RWC26-75 1264-1432 REL24CT-75F 1240-1317 RWC24-75F 1240-1343 RWC26-75F 1264-1442 REL24CT-75P 1240-1312 RWC24-75P 1240-1338 RWC26-75P 1264-1437 NOZZLE SUFFIXES F = Flush to 1/16” Contact Tip Recess P = 5/32” Contact Tip Protrusion None = 1/8” to 5/32” Contact Tip Recess Use genuine Tweco parts and consumables to protect the quality of your welds and the life of your torch. Stock No.5mm” “12. REL21-50 1210-1311 RWC24-50 1240-1331 RWC26-50 1264-1430 REL24CT-50F 1240-1315 REL21-50F 1210-1316 RWC24-50F 1240-1341 RWC26-50F 1264-1440 REL24CT-50P 1240-1310 REL21-50P 1210-1321 RWC24-50P 1240-1336 RWC26-50P 1264-1435 1240-1306 RWC24-62 1240-1332 RWC26-62 1264-1431 REL24CT-62F 1240-1316 RWC24-62F 1240-1342 RWC26-62F 1264-1441 REL24CT-62P 1240-1311 RWC24-62P 1240-1337 RWC26-62P 1264-1436 “15.NOZZLES REL24-75 RWC26-75 300 AMP 400 AMP 600 AMP WATER-COOLED WATER-COOLED WATER-COOLED TORCHES TORCHES TORCHES AIR-COOLED TORCHES Bore Size 3/8” 1/2” 5/8” 3/4” Part No. 41” 315mm 12.25” 243mm 9.90” 226mm 10.55” 319mm 13. (Contains RDM-L-ACC-1) RDM Adj.24” 260mm 11.57” 243mm N/A 8.51” 368mm 13. 100mm (Contain RDM-L-ACC-2) RDM Torch Mount Assy.97” 329mm 11.16” 385mm N/A 12. Kit #2 4 5 D-56 RDM-L-ACC-1 3500-1142 RDM-L-ACC-2 3500-1141 .16” 258mm 9.37” 213mm 9.92” 328mm 14.25” 243mm 12.12” 359mm N/A 13. Mount Acc. Part No.50” 342mm 11.03” 306mm 12. Description 1 RDM-L-1 3500-1102 RDM-XL-1 3500-1101 2 RDM-L-63 RDM-L-72 RDM-L-100 3500-1110 3500-1111 3500-1112 3 RDM-L-2 3500-1339 RDM Shaft Mount (Contains RDM-L-ACC-1) RDM Shaft Mount (Long/Universal) RDM Pivot Arm Assy. QTRW64/66-180 QTR. 63mm RDM Pivot Arm Assy. Mount Acc.43” 341mm 14.93” 252mm 11.00” 229mm 9. Conductor Tube “A” “B” “C” RDM-AL-63 3500-1136 QTRW64-180 QTRW64-22 N/A 8. 72mm RDM Pivot Arm Assy.19” 335mm 12.78” 375mm 15.44” 341mm 14. QTRW64/66-180L STANDARD MEDIUM RDM-2000-S 3500-1155 RDM-2000-M 3500-1156 HEAVY DUTY RDM-2000-H 3500-1157 ADJUSTABLE MOUNTING ARMS Part No/ Stock No. Stock No.96” 253mm 8.67” 398mm QTRW64-45 RDM-AL-72 3500-1137 QTRW64-180 QTRW64-22 QTRW64-45 RDM-AL-100 3500-1138 QTRW64-180 QTRW64-22 QTRW64-45 ARM FOR 5 AXES ROBOT RDM-A-90 3500-1182 Bracket to connect to 5 axes Miller ® robot RDM ADJUSTABLE LINK ARM PARTS Ref.40” 315mm 13.2000 SERIES ROBOTIC DEFLECTION MOUNTS Arc Welding Products & Accessories RDM 2000-M/S RDM 2000-M/S Part No/ Stock No.93” 328mm 14.91” 328mm 14. Kit #1 RDM Adj.87” 251mm 11.72” 348mm 12.61” 346mm N/A 12.00” 304mm 13.27” 362mm 15.37” 238mm 9.00” 356mm 12.90” 226mm 9.43” 214mm 10.90” 328mm 12.47” 291mm 13.94” 328mm 13.12” 283mm N/A 12.25” 243mm 12. No. QTRW64/66-45 8. RDM-A-180 3500-1132 RDM-A-180L 3500-1135 RDM-A-22 3500-1130 RDM-A-22L 3500-1129 RDM-A-22LW 3500-1122 RDM-A-45 3500-1131 RDM-A-45L 3500-1134 Conductor Tube “A” “B” “C” QTR.43” 341mm QTR. QTRW64/66-45L QTRW64/66-22 QTR66-22 QTRW64/66-22L QTR. 2000 SERIES ROBOTIC DEFLECTION MOUNTS Arc Welding Products & Accessories RDM 2000-ME/SE RDM 2000-ME/SE European Style STANDARD MEDIUM RDM-2000-SE 3500-1151 RDM-2000-ME 3500-1150 MOUNTING LINK ARMS Mounting Arm Part No. Torch Angle RDM-2000-63 3500-1161 180° N/A 22° 254mm 45° 309mm 180° N/A 22° 282mm 45° 318mm 180° 258mm 22° 331mm 45° 346mm RDM-2000-72 3500-1162 RDM-2000-100 3500-1163 Torch Length N/A = Not Applicable Tweco’s RDM assemblies provide an emergency stop (E-stop) switch to robot in the event of a collision. Stock No. D-57 . 5MM 4/M5 Bolts RDM-AP-24 3500-1181 MOTOMAN K5.5 ANGLE)] 3500-1147 ABB IRB 240/10. IRB 1500. K10. ARC MATE-20/S/12 40MM 4/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. MR-1000 MRH.5 ANGLE)] 3500-1147 CLOOS R/56 R/76 R/R106 RDM-AP-21 RDM-AP-22 RDM-AP-23 3500-1178 3500-1179 3500-1180 ESAB 1500. VR 006. Stock No.5 ANGLE)] 3500-1147 FANUC ARC MATE-JR.5MM 4/M5 Bolts RDM-AP-16 3500-1120 HITACHI 5430 MR 6060./S-10.5 ANGLE)] 3500-1147 D-58 3500-1141 3500-1146 3500-1141 .5 ANGLE)] 3500-1147 FANUC ARC MATE-100/S6. K150. DR 500.2000 SERIES RDM ADAPTER PLATES Arc Welding Products & Accessories RDM 2000-M/S Robot Manufacturer Robot Type Mounting Diameter Part No. DR 4200 40MM 4/M6 Bolts 3500-1147 DR 3000 32MM 6/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. IRB 2000. ABB IRB 6. MRK5 32MM 6/M6 Bolts 32MM 6/M5Bolts RDM-AP-7 RDM-AP-15 3500-1146 3500-1119 MOTOMAN SV-3 31. IRB 240L 40MM 4/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. AW10A. ARC MATE-JR. VR 16 50MM 4/M5 Bolts RDM-AP-12 3500-1116 REIS RV6. SR. AW5C. VR 005.5 ANGLE)] RDM-AP-7 PANASONIC AW5A. S/5 50MM 4/M6 Bolts RDM-AP-4 3500-1143 FANUC LR MATE-100 1 31.. ARC MATE-120.5 ANGLE)] 3500-1147 MILLER MR-5.. KR3015 50MM 4/M6 Bolts RDM-AP-17 3500-1123 MILLER MRV-6. SUPER K 40MM 4/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. 2000 40MM 4/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. MRV-2000. MR 6100 50MM 4/M6 Bolts 40MM 4/M6 Bolts RDM-AP-4 RDM-AP-6 3500-1143 3500-1145 3500-1141 3500-1141 3500-1141 IGM IGM KAWASAKI JS6 & SJ10 40MM 4/M6 Bolts Not Applicable RDM-AP-6 3500-1145 KUKA KR6. MRV-2300 40MM 4/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. VR 006L. AW6A. AW6AL. IRB 2400. VR 008.5 ANGLE)] 3500-1147 MOTOMAN ALL L SERIES 52MM 4/M5 Bolts RDM-AP-9 3500-1148 3500-1141 3500-1141 MULTI-PURPOSE MULTI-PURPOSE ADAPTER PLATE RDM-AP-ADJ 3500-1183 NACHI SC15 7603 48MM 4/M6 Bolts 52MM 4/M6 Bolts RDM-AP-11 RDM-AP-10 3500-1115 3500-1149 OTC DIAHEN DR 4000. IRB 240/16 50MM 6/M6 Bolts RDM-AP-19 3500-1176 3500-1141 ADAPTABLE ADAPTABLE BLANK PLATE RDM-AP-1 3500-1140 ASEA ALL 40MM 4/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. IRB 1400. RV6L 50MM 4/M6 Bolts RDM-AP-17 3500-1123 REIS RV-16. K6. RH30-16 80MM 6/M5 Bolts RDM-AP-20 3500-1177 STAUBLI RX90 40MM 4/M6 Bolts RDM-AP-8 [OR OPTIONAL RDM-AP-2 (22. SK SERIES. • Pnematic Drive Exhaust (PDE) System blows air through vent holes on incline housing which helps prevent slag build-up in shaft area. • Easy to program. STOCK NO. • Reamer Blade (QRC™-100). • Dual stage pneumatic clamping device ensures positive. 120 Volt PART NO. PART NO. secure clamping on nozzle. five clamp blocks and programming tools included with unit.5” cylinder) is a solid block with universal arm. QRC-2000 3500-1201 D-59 . May be used in a continuous or robotic controlled operation with one output signal. • Two-Stage Cam Plate (2. and Can Be Replaced Easily • May Be Mounted on Tweco’s New Accessory Stand (QRS-1) For the ultimate wire cutting system. QWT-120 3500-1300 QRC™-2000 NOZZLE CLEANING STATION • Rotary Impact Drive (RID) System. check out Tweco®’s new ON-THE-FLY Wire Cutting Station. STOCK NO. • Uses only half the air consumption of other cleaning stations. • Use the QRC-2000 with Tweco® Robotics® QRM-1 Anti-Spatter Mist Applicator. • Total storke inside nozzle 2”. Our Wire Cutting Station will reduce cycle time. It is easy to interface the Mist Applicator with the QRC-2000 and it will improve the efficiency of your welding operation.Robotic Accessories Arc Welding Products & Accessories QWT-120 WIRE CUTTING STATION • Maximize Use of Valuable Robotic Cell Space • On-The-Fly Wire Cutting Station • Won’t Increase Cycle Time Like Stationary Cutting Stations • Continuous or Robotic Controlled Operation With One Output Signal • Cutters Are Reversible for Twice the Life. STOCK NO. 5 GALLON/19L 53-015-500 55 GALLON/208L DRUM 53-018-500 .Robotic Accessories Arc Welding Products & Accessories QRM-1 ANTI-SPATTER MIST APPLICATORS • Maximize Use of Valuable Robotic Cell Space • Prevents Spatter Buildup • Reduces Downtime • Allows MIG Torch to Maintain More Consistent Weld Quality • Spray Pulsing Adjustable from 4 to 200 Pulses Per Minute • Pulse Volume Adjustment to Ensure Complete Coverage • Adjustable Air Purge to Assist in Cleaning • Used With Internal Air Blast • Maximum Amperage Draw 500mA • Available With or Without 24 Volt Solenoid • One Pint Anti-Spatter Storage Reservoir Standard Tweco® has developed an innovative method which helps MIG Torches maintain more consistent weld quality. Protex® Extra contains no fluorocarbons or chlorinated solvents. D-60 CONTAINER SIZE PART NO. DESCRIPTION Mist Applicator with Solenoid PART NO. QRM-1 3500-1203 PROTEX EXTRA ANTI-SPATTER Safe and non-flammable. nontoxic and non-flammable. Try our new Anti-Spatter Mist Applicator which will prevent spatter buildup. Water based Protex® Extra is environmentally safe. STOCK NO. 1 ● PART NO. QRP-IN 3500-1340 2 ● QRP-IN TCP PARTS BREAKDOWN ITEM DESCRIPTION PART NO. 1 16S Sleeve QRP-16S 3500-1341 2 EL16 Sleeve QRP-EL16 3500-1342 3 14H Sleeve QRP-14H 3500-1343 4 Protective Cover for Shaft QRP-1 3500-1344 D-61 Arc Welding Products & Accessories QRS-1 ACCESSORY STAND . This will ensure torch alignment so you can avoid poor quality welds and lost production time. STOCK NO. The kit includes alignment sleeves for all Tweco contact tips. STOCK NO. QRS-1 3500-1330 QRP-IN TCP CHECK TOOL KIT 4 ● • Ensures Torch Alignment • Reduces Downtime by Quickly Checking TCP • Kit Includes Three (3) Sleeves to Accommodate All Tweco® Contact Tips and a Protective Cover for the Shaft • Designed to Mount on Tweco’s New Accessory Stand (QRS-1) 3 ● Tweco®’s New Check Tool allows you to quickly check TCP.Robotic Accessories • Maximize Use of Valuable Robotic Cell Space • Rugged Welded Steel Frame • Allows for Quick and Easy Installation of Tweco®’s Robotic Accessories: • Nozzle Cleaning Station • Anti-Spatter Mist Applicator • Wire Cutting Station • TCP Check Tool PART NO. QCT-1 3500-1325 . STOCK NO.Robotic Accessories Arc Welding Products & Accessories QCT-1 CONDUCTOR TUBE ALIGNMENT FIXTURE • Maximize Use of Valuable Robotic Cell Space • Minimizes Downtime by Verifying Conductor Tube Alignments • Capable of Checking Alignment of Eight (8) Conductor Tube Bend Angles • Adjustable Alignment Block to Accommodate a Variety of Conductor Tube Lengths • Tweco Also Offers a Companion TCP Check Tool (QRP-IN) D-62 PART NO. Slice Exothermic Cutting Systems .Arc Welding Products & Accessories Air-Carbon Arc Gouging Torches & Equipment. 05m) cable 7’ (2.05m) cable 7’ (2. 360° swivel cable assembly. K3000. 01-082-000 61-082-000 61-082-001 70-084-207 70-084-210 K3000 Torch Only Torch & 7’ (2. the smallest torch is designed for metal removal jobs in such places as repair shops.m) cable Catalog No. K4000 K4000 is made for heavy-duty metal removal applications such as weld preparations in pressure vessel shops and shipyards. K3000. and K4000 torches feature: • • • • • Natural 15° angle in the torch. Reduced torch and cable weight.1m) cable Torch & 10” (3. Ordering Information Torch Description Torch Only Torch & 7’ (2. K5 is an angle arc torch that accepts 5/8” carbon electrodes. construction.1m) cable Torch & 10’ (3. K3000 is a medium-duty torch built for repair and maintenance jobs in areas such as mining. For applications where the Tri-Arc foundry torch is too large and the K-4000 is too light.05M) cable only 01-046-000 61-046-000 61-046-001 70-088-107 70-088-110 D-64 Ordering Information Torch Description Torch Only K5 Torch & 7’ (2.1m) cable K4000 Torch & 10’ (3. K2000.05M) cable only 01-065-000 61-065-000 61-065-001 70-088-107 70-088-110 K2000 Torch Only Torch & 7’ (2.05M) cable only Catalog No. farms and ranches. K2000.1m) cable only 10’ (3. body shops and sheet metal shops. and all types of metal fabrication. Rugged construction.1m) cable Torch & 10’ (3.1m) cable only 10’ (3.Air-Carbon Arc Gouging Torches Arc Welding Products & Accessories ANGLE-ARC® Arc Gouging Torches K2000.1m) cable only 10’ (3. Positive-grip handle.05m) cable 7’ (2. 01-104-002 61-104-005 61-104-006 . 13M) Cable 61-062-009 6106-2014 K-3 Torch Assembly with 10 ft. 1/4”. Cable (3M) 61-062-015 6106-2015 H-3 with 70-083-907 Swivel Cable Assy. 3/16”. lever and handle are made of high impact. (3M) Cable 61-062-010 6106-2015 DESCRIPTION PART NO. The insulators. pierce or flush away any kind of metal. 5/32”.. heat resistant materials for rugged service and low maintenance. 5/16” and 3/8” Arcair Copperclad Electrodes and is offered with either a 7 ft. 1/4”. tank shops and shipyards use the general purpose K-3 for plate edge preparation. 5/32”. Standard cable length is 7 ft. STOCK NO. length available.Air-Carbon Arc Gouging Torches Arc Welding Products & Accessories MODEL K-3 TORCH Steel fabricators. 3/16”. 360° swivel cable. Air flow is controlled by an “on-off” valve in the torch handle. paper mills and other industrial plants for equipment maintenance and repair. steel mills. cut. 7 ft. The torch head rotates for instant positioning of the electrode to any desired angle. (2. Cable (2. 5/16” and 3/8” Arcair Copperclad carbon electrodes. 10 ft.13M) 61-062-014 6106-2014 H-3 with 70-088-910 Standard Concentric Cable 10 ft. K-3 Torch Assembly with 7 ft. The K-3 offers a straight handle torch design with Arcair quality and reliability. DESCRIPTION PART NO.13M) 61-062-016 6106-2016 H-3 with 70-088-910 Swivel Cable Assy. bevel. The metal parts are specially selected for the best electrical efficiency and long life. Popular with railroads. back gouging welds and the removal of defective welds. gouge. D-65 .. this reliable design offers optimum air flow and all components are extremely rugged to handle even the most abusive work situations. with a maximum 10 ft. or 10 ft. H-3 with 70-083-907 Standard Concentric Cable 7 ft. STOCK NO. It accepts 1/8”. The H-3 can us 1/8”. Cable (3M) 61-062-017 6106-2017 MODEL H-3 TORCH Model H-3 is a general purpose Arcair torch which will groove. Cable (2. uniformity and productivity in automated gouging of steels and other metals with the air carbon-arc process. compares them with pre-set standards. . Economical J-groove and U-groove edge preparations.635mm). where it is used to prepare uniform “U” or “J” grooves. The N-6000 system measures minute variations in the arc voltage or amperage.025” (0. Usage of the N-6000 System has expanded to a wide variety of new and unique jobs.Automated Metal Removal System Arc Welding Products & Accessories ARCAIR N-6000 Automated Metal Removal System • • • • Gouging that is five times faster than with hand held torch. D-66 Groove depth is maintained within a tolerance ±0. The N-6000 System is ideally suited for metal fabrication. Automatic grooves that require less grinding than manually made grooves. Gouges more accurately and consistently. particularly in weld joint preparation. and takes immediate action through its feedback control maintaining the precise arc gap for optimum gouging. The System is also used extensively for backgouging of seams and for removing defective welds and cracks. The Arcair-Matic® N-6000 Metal-Removal System is designed to provide the best levels of control. Superior metal removal rate. improving the oper3/8 x 12 20-063-003 3/8 x 14 24-062-003 1/2 x 14 24-082-003 ating characteristics. Cool operation. Uniform diameter.Air-Carbon Arc Electrodes • • • • • Excellent arc stability. Clean machine-like grooves or cuts. cooler. 5/8 x 14 3/4 x 14 3/8 x 17 1/2 x 17 5/8 x 17 3/4 x 17 1 x 17 24-102-003 24-122-003 24-064-003 24-084-003 24-104-003 24-124-003 24-164-003 DC COPPERCLAD FLAT ELECTRODES Specially designed for Electrode Size Catalog close tolerance metal (inches) Number removal. 5/32 x 12 Used on applications 3/16 x 12 where copper is consid1/4 x 12 ered detrimental. 5/16 x 12 Electrode Size (inches) 1/8 x 12 5/32 x 12 3/16 x 12 1/4 x 12 5/16 x 12 3/8 x 12 1/2 x 14 Catalog Number 22-023-003 22-983-003 22-033-003 22-043-003 22-053-003 22-063-003 22-082-003 AC POINTED COPPER CLAD ELECTRODES DC JETROD® COPPERCLAD JOINTED ELECTRODES Eliminates stub loss and provides continuous electrode feed for semi-automatic and automatic Arcair torches. operation and helps maintain electrode diameter at the point of the arc. ELECTRODE TYPES DC COPPERCLAD POINTED ELECTRODES DC PLAIN GOUGING ELECTRODES A standard all purpose gouging electrode. Controlled copper coating improves conductivity providing more efficient. repairing or making dies. Electrode Size Catalog Rare earth material is 3/16 x 12 20-033-003 (inches) Number 1/4 x 12 20-043-003 5/16 x 14 24-052-003 added to stabilize the arc. 3/8 x 5/32 x 12 35-099-03 Excellent for removing 5/8 x 3/16 x 12 35-033-003 weld crowns. D-67 Arc Welding Products & Accessories ARCAIR® GOUGING ELECTRODES . removing welded dogs and scarfing billets. 3/8 x 12 1/2 x 12 5/8 x 12 Catalog Number 21-983-003 21-033-003 21-043-003 21-053-003 21-063-003 21-083-003 21-103-003 Electrode Size Catalog Designed for use with (inches) Number AC power supplies. Electrode Size General purpose elec(inches) trodes without the copper coating. Machined at each end to provide male and female fittings. eliminating the expense and inconvenience of keeping a complete line of single torches.Air-Carbon Arc Gouging Torches Arc Welding Products & Accessories TRI-ARC® TORCH Three Torches in One Tri-Arc® torch is designed for foundry applications. long) 74-143-610 7414-3610 D-68 . A heavy duty all purpose torch which includes three interchangeable heads to suit the operation requirements. DESCRIPTION PART NO. STOCK NO. cable assembly 74-143-607. Tri-Arc Torch without Heads 62-991-417 6299-1417 Tri-Arc Defect Removal Torch 62-991-418 6299-1418 Tri-Arc 1/2” Padwashing Torch 62-991-419 6299-1419 Tri-Arc 5/8” Padwashing Torch 62-991-420 6299-1420 Tri-Arc 3/4” Padwashing Torch 62-991-421 6299-1421 Tri-Arc 1/2” General Purpose Torch 62-991-422 6299-1422 Tri-Arc 5/8” General Purpose Torch 62-991-423 6299-1423 Tri-Arc 3/4” General Purpose Torch 62-991-424 6299-1424 Tri-Arc Torch without Cable and Heads 02-991-411 0299-1411 Swivel Cable STR Thread (10 ft. All torches come standard with 7 ft. Maintenance is simpler and smaller stock of replacement parts is required. As with the Utility Pack. non-metallic or composite material. The industrial cart is capable of carrying a 9 in/(229mm) diameter cylinder. Included in the Battery Unit is a 12-Volt rechargeable SLICE® Battery Box Assembly. The package has the basic items needed to do a cutting job packed in a rugged tool box. The Industrial SLICE® Pack includes SLICE® torch and striker assemblies with 10 ft/3. striker and rods. D-69 . 63-991-003 The SLICE® Battery Unit Pack comes in a rugged metal tool box. Just supply oxygen and an ignition source and you are ready to cut. SLICE® BATTERY PACK Catalog No.05m oxygen hose and power cables.SLICE® Exothermic Cutting Systems Arc Welding Products & Accessories SLICE® UTILITY PACK Catalog No. 63-991-026 The SLICE® Utility Pack permits you to use the exothermic cutting process to cut virtually any metallic. you get all the basic items needed to do a cutting job such as torch. SLICE® INDUSTRIAL PACK Catalog No. 63-991-021 The Industrial SLICE® Pack provided the versatility of exothermic cutting and accommodates a larger oxygen cylinder to extend your cutting time. 63-991-032 The SLICE Cordless Striker Pack uses two small lead-acid batteries to supply a current surge sufficient enough to ignite both the 1/4” and 3/8” bare SLICE Cutting Rods. striker. Catalog No. Flux Coated Uncoated Catalog No. This model is well suited to the emergency type cutting situations where seconds count. SLICE EXOTHERMIC CUTTING RODS SLICE exothermic cutting rods are designed specifically for use with SLICE cutting systems. With this unit you get the torch. 1/4” x 22” (7 x 559mm) 25 pieces 100 pieces 42-049-002 42-049-003 43-049-002 43-049-003 N/A 43-049-005 42-049-005 43-049-007 N/A 43-049-009 1/4” x 44” (7 x 1118mm) 25 pieces 3/8” x 18” (10 x 457mm) 50 pieces 3/8” x 36” (10 x 914mm) 25 pieces D-70 . 63-991-002 The SLICE Complete Pack comes in an aluminum carrying case with everything needed to quickly complete an exothermic cutting job. rods.SLICE™ Exothermic Cutting Systems Arc Welding Products & Accessories SLICE® CORDLESS STRIKER PACK Catalog No. 6” collet extension and shield. 12-volt battery with charger. Available in 120 volt AC only. regulator and an empty 55 cubic foot oxygen bottle. SLICE® COMPLETE PACK Catalog No. Manual Welding Accessories • • • • • Electrode Holders Ground Clamps Cable Connectors Solder Lugs Hammer-On Lugs Arc Welding Products & Accessories ® . Manual Welding Products ® Arc Welding Products & Accessories TWECOTONG® ELECTRODE HOLDERS TWECOTONG ELECTRODE HOLDERS feature reversible top and bottom "SUPER-MEL" Insulators. protected springs.Depth 2" 1" . Ball-point cable connection is also featured.Depth 31⁄2" 11⁄2" . STOCK NUMBER 9110-1101 9110-1102 9110-1103 9110-1104 9110-1105 9110-1106 STOCK NUMBER 9120-1000 MODEL NUMBER A-532 A-316 A-732 A-14 A-14-HD A-38-HD MODEL NUMBER 4TT AMPERAGE CAPACITY 200 250 300 350 400 500 BODY ALLOY ELECTRODE CAPACITY 98% Copper 98% Copper 98% Copper 98% Copper 98% Copper 98% Copper DESCRIPTION thru 5/32" thru 3/16" thru 7/32" thru 1/4" thru 1/4" thru 3/8" CABLE CONN CAPACITY METRIC LENGTH 81⁄2" 91⁄4" 10" 11" 12" 131⁄4" 216mm 235mm 254mm 279mm 305mm 336mm Ball-Point thru 2/0 Ball-Point thru 2/0 Ball-Point thru 2/0 Ball-Point thru 4/0 Double Ball-Point thru 4/0 Double Ball-Point thru 4/0 AMPERAGE CAPACITY ELECTRODE CAPACITY CABLE CONN CAPACITY 400 1/16" thru 1/4" thru 3/0 TWECO-TITE Holder ENGLISH LENGTH ENGLISH LENGTH 9" METRIC LENGTH 229mm TWECO GROUND CLAMPS STOCK NUMBER MODEL NUMBER AMPERAGE CAPACITY JAW OPENING CABLE CONN CAPACITY ENGLISH LENGTH METRIC LENGTH 9205-1120 9205-1130 9205-1150 9205-1230 9205-1250 9205-1320 9205-1330 9205-1350 GC-200 GC-300 GC-500 SGC-300 SGC-500 FGC-200 FGC-300 FGC-500 200 300 500 300 500 200 300 500 1" . Efficient 6-position jaw patterns and fully insulated.Depth 4" 2" .Depth 13⁄4" 5 ⁄8" .Depth 3" 11⁄2" .Depth 13⁄4" 2" .Dept 31⁄4" Ball-Point thru 1/0 Ball-Point thru 3/0 Ball-Point thru 4/0 1 ⁄2” Stud Connection 1 ⁄2” Stud Connection Ball-Point thru 4/0 Ball-Point thru 4/0 Ball-Point thru 4/0 6" 81⁄2" 10" 9" 9" 5" 71⁄4" 91⁄4" 157mm 216mm 254mm 228mm 228mm 127mm 184mm 234mm D-72 .Depth 51⁄4" 2" . 1. 1 4. 3/0 1/0.461" 17/32" 17/32" 21/32" 50 . 1 or 1/0 cable. TWECOLUGS® . The MBP/MPC connectors are equipped with stainless steel screws to resist corrosion in a hostile environment. 2 ea Female 1 ea Male/Female Pkg.D. 1 4. are available. 2. 2 ea Female 4. Both connectors may be used interchangeably and are interchangeable with older Tweco MBP Connectors STOCK NUMBER MODEL NUMBER The Whip Cable Connector is used when down sizing cable to an electrode holder.559" . 2 ea Male Pkg.660" . MPC and MBP/MPC.238" 125 100 200 D-73 Arc Welding Products & Accessories TWECO CABLE CONNECTORS . 2.289" . 2 ea Female 1 ea Male/Female Pkg. 2 male connector with cable hole sized to fit 4. Both the 21-MPC and the 2-1-MBP/MPC will fit any No. 2 ea Male Pkg. 3/0 3/0 or 4/0 3/0 or 4/0 3/0 or 4/0 1 ea Male/Female Pkg. 2/0. 1/0 Pkg. 1 1/0. 2/0. 2 ea. Both connectors are equipped with heat and oil resistant covers.zinc plated type cable & cover screws 9425-1100 1-MPC Complete Single Ball-Point 9425-1110 1-MPC-1 Male Half Single Ball-Point 9425-1120 1-MPC-2 Female Half Single Ball-Point 9425-1200 2-MPC Complete Single Ball-Point 9425-1210 2-MPC-1 Male Half Single Ball-Point 9425-1220 2-MPC-2 Female Half Single Ball-Point 9425-1400 4-MPC Complete Double Ball-Point 9425-1410 4-MPC-1 Male Half Double Ball-Point 9425-1420 4-MPC-2 Female Half Double Ball-Point 9425-1140 2-1-MPC Whip Single Ball-Point CABLE CAPACITY STANDARD PACKAGE 4. 3/0 1/0. SOLDER SOCKET STD PKG 50 25 25 T-62 T-120 T-3040 T-40HD 6 thru 2150 1 thru 2/0 3/0 & 4/0 4/0 Heavy-Duty 17/32" 225 250 325 . 2 ea Male Pkg. 4 female connector. The MPC connectors are furnished with zinc plated cover and ball-point cable screws. 2. 2.347" . 2. 2/0.Manual Welding Products ® Two styles of cable connectors. It is a No. 2 or No.CRIMP OR SOLDER TYPE (use Tweco “Lug-Set”) STOCK NUMBER 9520-1104 9520-1105 9520-1107 9520-1109 POWER CABLE LUGS 9520-1101 9520-1102 9520-1103 MODEL NUMBER WELDING CABLE SIZE AMP RATING SIZE OF STUD HOLE I. TYPE CABLE CONNECTION MPC SERIES POSITIVE-CAM Mechanical Connection .776" T-810 T-68 T-46 8 thru 10 6 thru 870 4 thru 690 50 21/64" 21/64" 13/64" . 0mm 350 Die Cast Brass thru 4/0 10”/253mm WH400 9110-1130 1/4”/6. DESCRIPTION WHT-400 9120-1010 400A Weldskill Holder . MODEL NUMBER STOCK NUMBER ELECTRODE CAPACITY AMP RATING BODY ALLOY CABLE CAPACITY LENGTH IN.5mm 300 Die Cast Brass thru 2/0 10”/253mm WH350T 9110-1139 1/4”/6.0mm 400 98% Copper thru 4/0 10”/253mm WELDSKILL™ “HOLD-TITE” ELECTRODE HOLDERS D-74 PART NO. 300A.0mm 200 Die Cast Brass thru 2/0 8 1/4”/209mm WH250 9110-1127 3/16”/5.0mm 250 Die Cast Brass thru 2/0 10”/253mm WH300T 9110-1138 7/32”/5.0mm 200 Die Cast Brass thru 2/0 8 1/4”/209mm WH250T 9110-1137 3/16”/5. 300T. 350A and 400A Tong-type electode holder options: 200T.0mm 250 Die Cast Brass thru 2/0 10”/253mm WH300 9110-1128 7/32”/5.0mm 400 98% Copper thru 4/0 10”/253mm WH200T 9110-1136 5/32”/4.0mm 350 Die Cast Brass thru 4/0 10”/253mm WH400T 9110-1140 1/4”/6.Manual Welding Products ® Arc Welding Products & Accessories WELDSKILL™ ELECTRODE HOLDERS • • • Available in five amper options: 200A.5mm 300 Die Cast Brass thru 2/0 10”/253mm WH350 9110-1129 1/4”/6. STOCK NO. 250A. 250T. 350T and 400T “Ball-Point” cable connectors for best conductivity./MM WH200 9110-1126 5/32”/4. 1mm WELDSKILL™ STEEL GROUND CLAMPS • • Quality Lug-type cable connections for optimum reliability 200A.4mm 3”/76. 500A 180 AMP CLAMP 300 AMP CLAMP 500 AMP CLAMP Part No: WSGC-180 Part No: WSGC-300 Part No: WSGC-500 STOCK NO: 9205-1200 STOCK NO: 9205-1201 STOCK NO: 9205-1202 WELDSKILL™ HAMMER-ON LUGS Part Number WS-3040H WS-120H Stock Number 9520-1128 3040 Hammer Lug 3/0 through 4/0 250 17/32” .660” 9520-1127 120 Hammer Lug 1 through 2/0 225 17/32” .D.8mm 1/4”/133.347” D-75 Arc Welding Products & Accessories WELDSKILL™ COPPER GROUND CLAMPS .9mm 9205-1211 300 1 1/2”/38.4mm thru 4/0 9 1/2”/241. 500A MODEL NUMBER STOCK NUMBER WGC200 9205-1210 WGC300 WGC500 AMP RATING JAW OPENING JAW DEPTH CABLE CAPACITY LENGTH IN.4mm 9205-1212 500 2”/50.1mm thru 1/0 5 3/4”/145.559” Description Welding Cable Size AMP Rating Size of Stud Hole I.6mm thru 3/0 7 1/2”/190.1mm 4”/101.Manual Welding Products ® • • Quality Lug-type cable connections for optimum reliability 200A. 300A. 300A./MM 200 1”/25.461” WS-46H 9520-1126 46 Hammer Lug 4 through 6 90 21/64” . Solder Socket WS-62H 9520-1125 62 Hammer Lug 6 through 2 150 17/32” . 1 1 2 2 2-WPC Complete Set 2-WPC-P Male Half 2-WPC-R Female Half 9425-1225 9425-1226 9425-1227 1/0. 3/0 1 2 2 WDC-75 Complete Set WDC-75-P Male Half WDC-75-R Female Half 9425-1435 9425-1436 9425-1437 3/0 or 4/0 3/0 or 4/0 3/0 or 4/0 1 2 2 Panel Receptacles to fit (Dinse Style) Male Connectors WDP-25 (Fits WDC-25-P) 9580-1129 4. 3/0 1/0. 2/0. 3/0 1/0. 2/0. 3/0 1 2 2 4-WPC Complete Set 4-WPC-P Male Half 4-WPC-R Female Half 9425-1425 9425-1426 9425-1427 3/0 or 4/0 3/0 or 4/0 3/0 or 4/0 1 2 2 WELDSKILL (DINSE STYLE) CABLE CONNECTORS PART NUMBER STOCK NUMBER CABLE CAPACITY STANDARD PACKAGE WDC-25 Complete Set WDC-25-P Male Half WDC-25-R Female Half 9425-1445 9425-1446 9425-1447 4. 2. 2. 3/0 1/0. 2. 1 4. 2. 2. 1 4. 1 1 2 2 WDC-50 Complete Set WDC-50-P Male Half WDC-50-R Female Half 9425-1430 9425-1431 9425-1432 1/0. 1 4. 1 1 WDP-50 (Fits WDC-50-P & WDC-75-P) 9580-1130 1/0. 2/0. 2. 1 4. 2/0.4/0 1 D-76 . 2.Manual Welding Products ® Arc Welding Products & Accessories WELDSKILL™ CABLE CONNECTORS WELDSKILL POSITIVE-CAM MECHANICAL CABLE CONNECTORS PART NUMBER STOCK NUMBER CABLE CAPACITY STANDARD PACKAGE 1-WPC Complete Set 1-WPC-P Male Half 1-WPC-R Female Half 9425-1125 9425-1126 9425-1127 4. . 3/0 1/0. 2/0. 2/0. All stainless interior tub sealed so moisture does not seep into insulation. Temperature control can be set at 100°F to 300°F. container. / Stock No.150C Element: 1 ea. New high tech insulation allows oven to heat 25% faster and holds the heat 25% longer than competitive ovens. Cabinet: Stainless Steel Illuminated Power Indicator Dimensions: 23" x 9" x 11" Shipping Weight: 30 lbs. TRB50 / 9900-1160 Electrode Capacity: 50 lbs. / 22. of loose rods or 50 lb.7Kg Volts: 120 Thermostat: Adjustable Temperature Range: 150F-300F/60C . Energy efficient heating element heats rods quicker and with less electricity than other competitor ovens.6 Kg D-77 . TRB50 Part No. Tool box construction makes unit easy to carry and open. Holds 50 lbs. / 13. 150 watt arc element for even heat distribution.Manual Welding Products ® Arc Welding Products & Accessories ROD OVEN TRB50 (110V) • • • • • • • Only all-stainless steel rod oven in welding industry. . Arc Welding Products & Accessories Chemicals & Underwater Products . fluorocarbons or silicones. Protex Clear not only protects surfaces from spatter. PROTEX ORIGINAL ANTI-SPATTER CONTAINER SIZE PART NUMBER 1 Gallon/3. build-up on MIG gun nozzles and contact tips.8L (case of 4) 5 Gallon/19L 55 Gallon/208L Drum PART NUMBER CONTAINER SIZE PART NUMBER 53-007-500 53-024-500 53-014-500 53-015-500 53-018-500 1 Gallon/3./207ML (case of 12) 24 oz/710ML (case of 12) 1 gallon/3. PROTEX PLUS ANTI-SPATTER CONTAINER SIZE 16 oz. When the nozzle of the MIG gun is warm.Metalworking Chemicals Arc Welding Products & Accessories PROTEX® ORIGINAL Arcair’s original anti-spatter compound formula is still your first choice for all heavy-duty high heat applications. you are ready to gouge or weld in one minute or less. slag and scale but dries to a clear tough finish. Protex Clear will provide a barrier that works for months to shield work surfaces and fixtures from oxides and rust.8L (case of 4) 5 Gallon/19L 55 Gallon/208L Drum 53-011-000 53-015-000 53-018-000 PROTEX® EXTRA PROTEX® CLEAR With Protex Extra anti-spatter from Arcair./473ML Can (case of 12) D-80 PART NUMBER 57-021-106 PROTEX TIP-DIP ANTI-SPATTER CONTAINER SIZE PART NUMBER 16 oz. simply dip into the gel. PROTEX EXTRA ANTI-SPATTER PROTEX CLEAR ANTI-SPATTER CONTAINER SIZE 7 oz./454GR Jar (case of 12) 57-021-105 .8L (case of 4) 5 Gallon/19L 55 Gallon/208L Drum 53-014-201 53-015-201 53-018-201 PROTEX® PLUS PROTEX® TIP-DIP Protex Plus is an aerosol anti-spatter that contains no Protex Tip-Dip gel provides protection from spatter chlorinated solvents. Because of its latex base. The arc stabilizing base material used in Protex Original allows it to withstand temperatures of approximately 1600°F. Safe and non-flammable. This can be as much as ten times faster than ordinary non-toxic anti-spatters. 8L (case of 4) 57-014-000 PROTEX ZINC RICH COLD GALVANIZING CONTAINER SIZE PART NUMBER 16 oz. dirt and grime from aluminum and aluminum alloys with Protex Alclean aluminum cleaner./473ML Can (case of 12) 57-031-002 D-81 Arc Welding Products & Accessories PROTEX® ALCLEAN .Metalworking Chemicals PROTEX® ZINC RICH Quickly clean oxides. Protex Zinc Rich Cold Galvanizing compound uses the “sacrificial anode” principal to provide corrosion protection for the base metal. In most cases. The zinc content in Zinc Rich sacrifices itself to any metal higher (nobler) than zinc in the periodic table of elements such as iron. PROTEX ALCLEAN ALUMINUM CLEANER Container Size Part Number 1 Quart/946ML (case of 12) 57-021-200 1 Gallon/3. the mild acid in Protex Alclean takes only minutes to work. 8 mm) diameter welding electrodes. • May be converted to an underwater welding torch by simply changing collets.5 lbs.04 kg) with cable. • Designed to gouge or cut steel. (1.24 cm) Weight: 3.66 kg) • Lightweight.05 m) heavy-duty cable. durable and easy to use electrode holder. • Underwater cutting and welding torch with a one piece body construction. (2.05 m) cable which can be disconnected from the torch. • Fully insulated electrically for safety in normal operation. (3. 14-050-128 Catalog No. 5/32” (4. (2. 14-050-124 14-050-126 ARCWATER® II Combination Torch Length: 9-3/4” (24. Description Arcwater II Torch (5/16” collet chucks) SEA-STINGER® II UNDERWATER ELECTRODE HOLDER Length: 6” (15. • Accepts 1/8” (3. • Oxygen free to eliminating the risk of hydrogen gas pocket explosions. (3.2 cm) Weight: 4. stainless steel and other metals.2 mm).0 mm) and 3/16” (4. Description Sea Torch Complete (5/16” collet chucks) Sea Torch Complete (3/8” collet chucks) Catalog No. • Replaceable cable and internal changes to extend service life.Underwater Cutting & Welding Arc Welding Products & Accessories SEA TORCH® COMBINATION TORCH Length: 8-3/4” (22.5 kg) with cable Equipped with 10 ft.77 cm) Weight: 5.5 lbs.65 lbs. Description Sea-Stinger II Holder D-82 Catalog No. • Bright orange for high visibility to the diver. Equipped with 10 ft. 14-050-127 . 42-059-008 (White) Diameter: Outside 5/16” (8 mm) Bore Hole . barnacles and other sea growth. 42-024-002 42-984-004 42-034-007 CURRENT AMPERES 150-180 170-210 190-230 BURN OFF TIME (SEC) 12” (305 mm) 40-46 44-56 59-66 SEA-JET® CUTTING ELECTRODES Catalog No. especially made for the Arcwater process. 5/32 (4.113” (3 mm) Length: 14” (355.5 mm) Length: 18” (458 mm) Burns most materials encountered in underwater cutting jobs. SEA DRAGON™ CUTTING RODS Catalog No.5 mm) Length: 18” (458 mm) Underwater exothermic Sea Jet cutting electrodes will burn ferrous and melt non-ferrous materials such as concrete.8 mm) Length: 14” 355.0 mm) 3/16” (4.9 mm) Length: 9” (228.6 mm) 18” (458 mm) For structural fabrication and repairs requiring underwater wet welding. 42-066-006 (Red) Diameter: 3/8” (9. SEA-CUT® I CUTTING ELECTRODES Catalog No.0 3/16 4.Underwater Cutting & Welding Arc Welding Products & Accessories SEA-WELD® WELDING ELECTRODES Catalog No. TUFF COTE® CUTTING ELECTRODES Catalog No.8 CATALOG NO. ELECTRODE SIZE INCH MM 1/8 3.2 mm). then waterproofed. 42-059-007 (Blue) Diameter: Outside 5/16” (8 mm) Bore Hole . 42-075-005 (Orange) Diameter: 3/8” (9. 42-059-006 (White) Diameter: 5/16” (7. ARCWATER® GOUGING ELECTRODES Catalog No.6 mm) Tubular steel design used for oxygen-arc cutting.6 mm) Coated with an arc stabilizing flux coating. see below (Yellow) Diameters: 1/8” (3.113” (3 mm) Length: 14” (355. Waterproofed with a white coating.2 5/32 4. rock.6 mm) Copper coated carbon/graphite electrodes. D-83 . Ontario. Bhd. Box 12250 • Wichita. CUSTOMER SERVICE: P. Australia Ph: (61) 3-9474-7400 Fax: (61) 3-9474-7510 Thermadyne do Brasil Rio de Janeiro. England Ph: (44) 1257-261755 Fax: (44) 1257-224800 Thermadyne Asia Sdn. Ontario Canada Ph: (1) 905-827-1111 Fax: (1) 905-827-3648 Thermadyne UK Chorley.com Printed in U.A. 2001 www..WORLD HEADQUARTERS: 101 S. 64-2100 (2/01) © Tweco Products Inc. O. United Arab Emirates Ph: (971) 4-332-9060 Fax: (971) 4-332-5484 Thermadyne de Mexico Mexico City.tweco. Mexico Ph: (52) 5696-7407 Fax: (52) 5696-7757 Thermadyne Japan Osaka. Italy Ph: (39) 039-204-991 Fax: (39) 039-204-9922 Form No. Brazil Ph: (55) 21-485-8859 Fax: (55) 21-485-8735 Thermadyne Middle East Dubai.S.S. Kuala Lumpur. Louis. Japan Ph: (81) 6-4809-8411 Fax: (81) 6-4809-8412 Thermadyne Europe Milan. Hanley Road • St. KS 67277 800-231-9353 • FAX 800-633-9513 International Offices International Customer Service Oakville. Malaysia Ph: (603) 6092-2988 Fax: (603) 6092-1085 Cigweld Australia Melbourne. . MO 63105 • 314-721-5573 • FAX 314-746-2161 U. Canada Ph: (1) 905-827-9777 Fax: (1) 905-827-9797 Thermadyne Canada Oakville.