TS-SRAN-HW-0108_I5

Technical Support NoteTS-SRAN-HW-0108 FDSW as new factory load for FSMF core module R adio N e tw ork F l exi Mult ir adio BT S LTE F l exi Mult ir adio BT S TD -LTE F l exi Mult ir adio BT S W C DMA F l exi Mult ir adio BT S Singl e R A N F l exi Mult ir adio 10 BTS ED GE This document contains following type of information Informative X Preventive Corrective Additional categorization Urgent Security Release Upgrade X SW Update X Parameterization Information is classified as Internal Public X Customer Specific Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of its products and services. We would like to encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and follow the recommendations for power use and proper disposal of our products and their components. If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia Solutions and Networks for additional information. TS-SRAN-HW-0108 - Page 1/17 © Nokia 2016 Version 5.0 Confidential ....................4 5...............0 Approved version 03-Mar-2016 4.......1 ............................0 Added workaround for FDSW1................2).................1 ..Synchronization at Sync In/Sync Out ports is not available with FDSW..............................0 and 4..................Table of Contents 1.................5 ..........................................12 7........SW updates for FSMF equipped with FDSW1...............................BTS Site manager cannot connect to FSMF equipped with FDSW .............0 BTS Site manager is in use...16 11.................SW update to FL15A/TL15A with FDSW1..1 ..............11 7.............................................. Impact to operations and maintenance .......................5)....3 .........................................Page 2/17 © Nokia 2016 Version 5..10 7......0 equipped FSMF............................................1........................................................... Added workaround for FDSW1................... Compatibility / Dependencies to other products ...........................16 10............. Changes between issues 3.....2 updates (chapter 7.11 7.4 when WN6........................10 7..................................3 2...................................6 ...........................15 9.0 to SBTS16.................. Restrictions / Known issues ..3 .....................5 6. References ... Added restriction 8.............................................4 .......................................................................3 4.6 7..........0 and 2.........0 .................. Keywords.............Autoconnection IP parameters are not migrated to RAT SW after successful SWDL ................................0 Approved version (NSN internal) 26-May-2015 2...........0 1.............. TS-SRAN-HW-0108 .................2 .2 ............................0 Approved version 05-Nov-2015 3.............0 and 3............. Validity................Reuse FSMF in another BTS SW technology ....................16 Contact: Contact your local Nokia Solutions and Networks support Summary of changes: 12-Jan-2015 1....... Introduction.......2 ...................................0 equipped FSMF .... SW Management. Changes between issues 2.......................SW updates for FSMF equipped with FDSW1...0 Document updated for the 2nd release of FDSW1........0 Confidential ............................13 8...............................Provisioning step is failing due to incompatible RF SW ................................SW update to SBTS16............................0...................................... Notes ................................................ Executive Summary ........................... .14 8........................2 with FDSW1.........................................0 to FL15A/TL15A SW updates (chapter 7...............................14 8...........................................SW updates for FSMF equipped with LN4............4 ...............10 7.....................................0 Approved version Changes between issues 1..................0 Document updated for the 1st release of FDSW1.14 8...........3 3......................14 8......................... Ordering FDSW Site Manager SW......... FSMF A. GSM16 Flexi Multiradio BTS Single RAN SRAN16.103 084792A. TL16 Flexi Multiradio BTS WCDMA RU50 EP1.10 Core module information . X X TS-SRAN-HW-0108 . 1.0 Confidential .101 A. instructions on how to prevent or how to recover from problem situations. These can be instructions that explain problem situations in the field. SR000913. FL15A. X X X Flexi Multiradio BTS Single RAN .104 identifies the FSMF units are initially loaded with FDSW. 2. VALIDITY Product Product Code Core Module Flexi Multiradio 10 System Module. boot loader 3. SRAN 16. KEYWORDS FSMF. TL15A. RG40. factory load.103 A. WBTS16 Flexi Multiradio 10 BTS EDGE RG30 EP1.104 Flexi Multiradio BTS LTE X X X X Flexi Multiradio BTS TD-LTE X X X X Flexi Multiradio BTS WCDMA .102 A. X X X Flexi Multiradio 10 BTS EDGE . FSMF 472181A. Factory Delivered SW.Purpose This document contains generic information about products.104 Product Release Flexi Multiradio BTS LTE RL70. LTE1474. supporting BTS SW technologies. Basic Multiradio BTS Boot-up.Page 3/17 © Nokia 2016 Version 5. announcements about changes or preliminary information as requirements for new features or releases.2. FL16 Flexi Multiradio BTS TD-LTE RL55. FDSW. . COMPATIBILITY / DEPENDENCIES TO OTHER PRODUCTS Flexi Multiradio System Module FSMF 472181A vs. RAN2924. Product Core Module version Flexi Multiradio 10 System Module. 1.1.2 SW. FSMF versions delivered with FDSW1.0 during Q1/2015. After this. Repaired FSMF version A.104. Some FSMF A. FSMF version A.0 equipped FSMF in use in SRAN16. FDSW can be updated to final RAT SW with any available BTS Site Manager SW version delivered along with BTS SW releases.103 modules delivered from Nokia hubs may still contain older factory SW LN4.0_ENB_1202_781_57. Actual customer deliveries can vary based on the existing A.0 Confidential .104 stocks at the Nokia hubs. including RAN2924 and LTE1474 features. FDSW is technology independent boot-up software. The change is needed since FSMF modules have been delivered out of factories and HWS centers with a RL40 SW version that is phased out by the end of 2014. FSMF production lines and HWS were updated to FDSW1.104 modules are also updated to FDSW1.4.103/A. A workaround is required to take FDSW1. All new FSMF modules labeled as 084792A.103 and A.104 are delivered with preinstalled FDSW.102/A.2 The first fully supported FDSW version for Flexi Multiradio BTS Single RAN is FDSW1. Alternatively.1 has been updated to production lines and HWS during Q4/2015.0 cannot be directly used with SRAN16.102/A. it is recommended to check the supported SW update options in chapter 7.Page 4/17 © Nokia 2016 Version 5. TS-SRAN-HW-0108 . In WCDMA/LTE/TD-LTE/GSM/SRAN case.103 works exactly the same as FSMF A. a FDSW specific Site Manager SW can be ordered. FDSW1. EXECUTIVE SUMMARY New boot loader SW – Factory Delivered SW (FDSW) is introduced to FSMF production. 2 SW. The FSMF needs to be updated to required SW level either locally using BTS manager or remotely using autoconnection without DHCP.1 is delivered to avoid any workarounds when upgrading to FL15A/TL15A.Page 5/17 © Nokia 2016 Version 5. No RF modules or optional subunits are detected if connected to FSMF with FDSW only. FSMF versions delivered with FDSW1. it is possible to make further normal SW upgrades to any of the WCDMA/LTE/TD-LTE/GSM/SRAN BTS SW levels permitted. In case needed dedicated SW build is not available. WCDMA: any RU50 (EP1)) and then SW upgrade to SBTS16.1.0 is used. The update procedure/time required is same as with existing SW upgrades using BTS Site manager. a workaround is needed to first SW upgrade with supported dedicated SW (LTE: Any RL70 build.2 SW. TS-SRAN-HW-0108 . Due to introduction of LTE790 Signed SW.0 Confidential .5.0 cannot be directly used with SRAN16. INTRODUCTION New A. a restriction is valid in FL15A/TL15A SW upgrades and when FSMF with FDSW1. All currently available WCDMA/LTE/TD-LTE/GSM BTS Site manager versions supporting FSMF can be used to connect and download desired WCDMA/LTE/TD-LTE/GSM/SRAN target BTS SW. Then the FSMF is able to detect the connected hardware.104 FSMF’s are delivered with ‘No RAT specific’ BTS SW that is technology independent boot loader SW called FDSW. A workaround is available to avoid permanent FSMF failure. This fix is the driver for FDSW1. contact your local Nokia Support. FDSW1. FDSW specific BTS Site Manager is available in NOLS may also be used for SW download to desired target BTS SW. Once the FSMF is updated from FDSW to any of the BTS SW. Does new procedure require more time. Currently it takes about 30 minutes for a complete integration via PnP (Field engineer starts a SW Upgrade to the target SW load locally from his PC.0 Confidential . rollback to FDSW can be executed. Is it possible to change target SW load from WCDMA to LTE after FDSW boot loader procedure was running? Or is this only possible via repair center? Can we roll back to FDSW from RAT SW? BTS RAT SW change RAT SW change can be done directly to target SW. The configuration files used at NetAct are the same and the auto-connection process is very similar to RAT specific one. See further details in chapter 7. FDSW can be downloaded on top of RAT SW when required (except on top of GSM RAT SW).0: BTSSiteEM-FDSW10-0_017_00  For FDSW1. when the desired SW activation failed? FDSW SW management functionality is the same as in standard FSMF supporting RAT SW. For example. GSM and SRAN. TD-LTE.1: BTSSiteEM-FDSW10-0_020_00 2. He then starts PnP. IMPACT TO OPERATIONS AND MAINTENANCE The following chapter is containing information about how to approach with FSMF core module version A. since the whole SW package must be downloaded via O&M? Currently the FDSW FSMF supports both scenarios:  Complete integration using FDSW with download of SW via OAM channel. In case FDSW is still available in FSMF as passive SW package. WCDMA. In addition. so only the SCF file is downloaded using PnP. instead the use of RFSToolv3 – Restore Factory Settings tool is required.6. controlled SW fallback is executed and FDSW is taken into use. BTS SW RAT change is available between LTE. 1. FDSW is not required as an interim SW download step. 4. What happens in case of SW fallback i.Page 6/17 © Nokia 2016 Version 5. Other RAT SW cannot be downloaded on top of GSM BTS SW with BTS Site manager. Is it possible to change target SW load from GSM to LTE/WCDMA after FDSW boot loader procedure was running? Or is this only possible via repair center? Can we roll back to FDSW from RAT SW? RAT SW change from FDSW to GSM is supported. The Customer (respectively the tools they are using) is not at all prepared to provide the site configuration files for site integration via SON PnP when the new boot loader is used. In case of failure during SW activation phase. when FSMF running WCDMA RU40 a direct SW update to TD-LTE RL45 can be performed.e.104 deployment. FDSW deliverables in NOLS CARE – Software Supply Tool – Software Catalog – Radio Network – Base Stations – FDSW Site Manager  For FDSW1.  Manual upgrade of SW from FDSW to RAT and PnP integration from RAT SW 5. 3. TS-SRAN-HW-0108 . See further details in chapter 6. FSMF core module serial number is displayed for site specific installation purposes FDSW does not detect any optional FSMF subunits/ RF modules/antenna line devices.10x FSMF running FDSW. FDSW includes ‘DHCP less Autoconnection’ FDSW and FDSW specific BTS Site manager provides Autoconnection functionality without a need of DHCP routines. SW upgrade to RAT specific BTS SW is mandatory step. This is called ‘incompatible’ view in terms of BTS Hardware display.0/FDSW1. Current WCDMA BTS Site manager versions cannot be used to update SW in FSMF equipped with FDSW? Any BTS Site manager supporting FSMF core module can be used to update RAT SW on top of FDSW. How BTS site HW modules are displayed in BTS Site manager when FDSW1. 7. How does this impact site integration? SW upgrade to RAT specific BTS SW is mandatory step. 6. FDSW specific BTS site manager or WCDMA BTS Site manager can used to connect with FSMF and download desired WCDMA target SW. In BTS Site manager. How long does it take to download the whole SW package remotely? Time required is the same as downloading the normal RAT SW. no HW modules are displayed in BTS Hardware view. No change in duration. a message of ‘Factory Delivery Software connected’ is displayed. How SW can be loaded to WCDMA BTS? FDSW is equipped with FDSW specific BTS Site Manager. if no SON deployment is used for the integration.0 Confidential . TS-SRAN-HW-0108 . Similarly. FDSW specific BTS Site manager provides ‘DHCP less Autoconnection’. when FDSW is active in BTS. 9. After first SW update to RAT specific SW. 10. Now SW update for RF modules is required.1 is active? When BTS Site manager connection is established to A. In WCDMA. RF modules/optional sub-units/antenna line devices connected are displayed. The deployment of RAT SW without having respective RAT features for ‘DHCP less Autoconnection’ is enabled. BTS Site Manager starts into ‘incompatible mode’.Page 7/17 © Nokia 2016 Version 5. 8. manual commissioning steps can be performed. In WCDMA/LTE/TD-LTE case. If RAT SW supports ‘Rollback’ option. 17. A. How optional sub-modules FBBA/FBBC are handled by the FDSW? Optional sub-modules are handled and update accordingly when target RAT SW is activated. A direct SW download shall be performed to target SW. Is licensing information available with FDSW specific BTS Site Manager? SW update to RAT SW is required to enable full visibility to licensing identification. Is FSMF unit identification available with FDSW specific BTS Site Manager? FSMF core module serial number is displayed. What is the way to inform the customer related to the changes? How should the customer be informed and did we have already experience from other projects? Information is available from LTE specific FDSW1. 21. 15. What about spare part handling. 16.0_ENB_1202_781_57.104. it is recommended to check the supported SW upgrade options in chapter 7. WCDMA or GSM? Nokia repair center – HWS will be updated during Q4/2015 to provide replacement units to carry FDSW1. 14. 11. To support the SW download. This TSN is updated accordingly after all matters affecting to customer communication have been identified. 20. 19. What will happen if we get such FSMF HW back from the repair center – is FSMF delivery SW being set as LTE. RAT SW is requesting the download of software files for those RAT specific RF modules from NetAct. 12.0 pilot.0 Confidential . 18. What is exactly the change between previously delivered FSMF’s and the newest one? Reason is FDSW factory delivery SW. To reach software consistency in the BTS site. FSME or FSIH? FDSW is used only with FSMF factory delivered / replacement units. SW update to RAT SW is required to enable full visibility to FSMF unit identification.1. See chapter 6. How RFM/RRH modules are handled by the FDSW? RAT specific hardware units are to be detected by RAT SW after the SW activation to RAT SW.104 is “FFF” (form-fit-functionality) compliant with existing FSMF modules. Re-commissioning is executed after RAT specific BTS SW is activated on FSMF unit 13. Is FDSW available with other Flexi Multiradio System Modules. Has FSMF equipped with FDSW a specific labeling/identification? New FSMF core module equipped with FDSW is labeled as 084792A. TS-SRAN-HW-0108 . Is there a possibility to reset unit back to FDSW only if wrong SW by accidently updated (LTE or WCDMA)? FDSW is required as an interim SW update step. What about saved configuration files and exchange/replacement of the FSMF core module. a step back to FDSW can be done. 22.103 modules delivered from Nokia hubs may still contain older factory SW LN4. the NetAct must be configured to support the SW download on request of the BTS. can previously saved configuration be reloaded to FSMF delivered with FDSW? RAT specific BTS Configuration files (SCF) remains unchanged. means if customer orders new spare part? Does the spare part come with original SW or with FDSW only? Some FSMF A.Page 8/17 © Nokia 2016 Version 5. 1 is identified in the FSMF delivery box? A sticker indicating ‘FDSW inside’ is attached to delivery box.Page 9/17 © Nokia 2016 Version 5.tool be used with FDSW and other BTS SW RAT’s? RAT SW shall be updated on top of FDSW1.tool.0 is identified from FSMF serial number? Modules with starting S/N’s shown below have been initially delivered with FDSW1.0 with PnP / BTS Site manager. L1152205810 K9152820013 F7152526061 F4153700675 EA153052014 NK153000003 27. Is the FDSW build available as BTS site manager downloadable SW release in NOLS? Only BTS Site manager is available in NOLS to give access to FDSW specific functionality.0 Confidential . Can Restore Factory Settings .0/FDSW1. How FDSW1. 26. RAT SW can be updated on top of FDSW1. 25.1 with Restore Factory Settings .0. 23. TY1542xxxxxxx F41548xxxxxxx F71542xxxxxxx TS-SRAN-HW-0108 .1 is identified in the FSMF serial number? Modules starting from serial number shown below have been delivered with FDSW1. How FDSW1. 24. How FDSW1.1. 0_ENB_1407_555_05 and later Note: Do not use FDSW1. The SW releases displayed have been verified during tests.0 LN7. With FDSW1.2 / 7. Solution FSMF equipped with FDSW1. *) There is restriction with FL15A/TL15A/SBTS16.0_RP_FD1405_310_00) is made to provide a direct SW upgrade path to target BTS SW.0_RP_ FL15A_ENB_0107_000684_000000 or FD1405_310_00 FL15A 0. SW MANAGEMENT 7.Page 10/17 © Nokia 2016 Version 5. See chapter 7. SW update can be performed with FDSW / RAT SW specific BTS site manager .0 cannot be updated to FL15A/TL15A P8 directly due to restriction in feature LTE790 Signed SW. Workaround The following workaround (1-2-3) is required to avoid permanent FSMF failure. TS-SRAN-HW-0108 .0.2 in SW update that will permanently damage FSMF with FDSW1.5 for workaround.0_ENB_1407_556_48 and later TL15A_ENB_0000_000595_000045 For example: FDSW1.0 equipped FSMF FSMF with FDSW1.0 is used.3.0 Factory Delivered Software FDSW1. LTE790 restriction is valid.  Direct SW Update from FDSW1.0 Confidential .1 can be updated directly to FL15A/TL15A P8 and later.0_ENB_1311_613_00 and later FL15A_ENB_0107_001193_000007 Any RL70 load FDSW1. 1) Factory SW 2) Intermediate SW 3) Target SW Any RL60 load FL15A P8 LN6.1 SW updates for FSMF equipped with FDSW1.1 a direct SW update to signed SW is supported.  Direct SW Update from FDSW1.1  FL15A.0  RL70 1.0 to TL15A P8 is not possible. Restriction In case factory build FDSW1.0PD (P7) FL15A_ENB_0107_000548_000056 older FL15A load RL55 MP1 and later TL15A P8 LNT5. 7.0 to FL15A P8 is not possible. Refer to chapter 7.7.2 SW update to FL15A/TL15A with FDSW1.0 (FDSW1. 0 1.0 1.0_ENB_1407_556_48 and later TL15A_ENB_0000_000595_000045 For example: LN4.2 (LN4.4 SW updates for FSMF equipped with LN4.0 1.0_ENB_1202_781_57) cannot be updated to FL15A/TL15A P8 directly due to restriction in feature LTE790 Signed SW.  Direct SW Update from FDSW1. SW update can be performed with FDSW / RAT SW specific BTS site manager. Restriction In case factory build LN4.2 Note: Do not use LN4.0 1. The SW releases displayed have been verified during tests. LTE790 restriction is valid.0 1.1 (FDSW1. TS-SRAN-HW-0108 .2  RL55 MP1  TL15A.0_ENB_1311_613_00 and later FL15A_ENB_0107_001193_000007 LN4.2 as well to other RAT SW’s.3 SW updates for FSMF equipped with FDSW1. Workaround The following workaround (1-2-3) is required to avoid permanent FSMF failure.7.2 FSMF with LN4.0_ENB_1202_ FL15A_ENB_0107_000684_000000 or 781_57 older FL15A load RL55 MP1 and later TL15A P8 LNT5. 1) Factory SW 2) Intermediate SW 3) Target SW Any RL60 load FL15A P8 LN6.Page 11/17 © Nokia 2016 Version 5. 7.1 Factory Delivered Software FDSW1.0_RP_FD1405_317_00) is made to provide a direct SW upgrade path to target BTS SW in FL15A/TL15A/SBTS16.0 to FL15A P8 is not possible.0 Confidential .  Direct SW Update from FDSW1.2 is used.0 to TL15A P8 is not possible. 2 o n w a r d s with FDSW1.0 equipped FSMF FSMF with FDSW1. 1) Factory SW 2) Intermediate SW 3) Target SW Any RL70 load FDSW1.2_ENB_0000_000082_000107 FD1405_310_00 Any WN9.0  RL70 1. Restriction In case factory build FDSW1.1_0000_374_83 and later For example: FDSW1. Solution FSMF equipped with FDSW1.5 SW update to SBTS16.2 directly due to restriction in feature SR000913 SBTS Signed SW.1 load and later WN9.Page 12/17 © Nokia 2016 Version 5.1 can be updated directly to SBTS16.2.0_RP_ SBTS16.2 onwards is not possible. With FDSW1.2 FDSW1. SR000913 restriction is valid.1  SBTS16.0_ENB_1407_555_05 and later SBTS16.3. TS-SRAN-HW-0108 .1 a direct SW update to signed SW is supported.0 is used.7.0 LN7.0 cannot be updated to SBTS16. Refer to chapter 7.  Direct SW Update from FDSW1.0 to SBTS16. Workaround The following workaround (1-2-3) is required to avoid permanent FSMF failure.0 Confidential .2 and later. Some limitations exist between different RAT SW’s which are indicated below with corresponding workarounds. Additional details for recommended SW upgrade options are available in the following documents:  RAT SW specific Release Upgrade Instructions .0 to FL15A/TL15A/SBTS16. 2) Utilize Restore Factory Setting -tool to update FSMF from GSM to other RAT SW 3) Utilize Restore Factory Setting -tool to update FSMF from SRAN to other RAT SW.g.2 SW update.1.Restore Factory Settings TS-SRAN-HW-0108 .2G BTS First Installation Software  TS-SRAN-HW-0080 .0 Confidential . 4) Use 2G BTS First Installation Software to update FDSW to GSM. LTE and then apply 2G BTS First Installation Software.Summary of Corrections and Enhancements  Release Upgrade Instruction -document in Flexi Multiradio 10 BTS EDGE release documentation.Page 13/17 © Nokia 2016 Version 5.7. refer to chapter 7. 5) Utilize Restore Factory settings –tool to update FSMF first to e. 1) Restriction in direct FDSW1.6 Reuse FSMF in another BTS SW technology Reuse FSMF in other BTS SW technologies This is general concept for FSMF BTS SW RAT changes. Page 14/17 © Nokia 2016 Version 5.1 Provisioning step is failing due to incompatible RF SW Problem exists in BTS SW older than RL60MP1/RL45 MP2 and when RF SW is different than inside BTS SW. Autoconnection process is starting all again after RAT SW is on eNB. After successful SW download. 8. Workaround Update FSMF to RAT SW. The incomplete “SW activation” scenario can take place after SW download/activation requests to eNB. For example if they are running factory SW that is different to the target SW.0 Confidential . target SW detects SW inconsistency with RF modules. Due to detected SW inconsistency. problem doesn’t exist. If DHCP is used. NetAct does not respond as eNB SW is marked as “active” yet. However. which is concluded to failed provisioning step. the eNB requests SW download from NetAct.2 Autoconnection IP parameters are not migrated to RAT SW after successful SWDL Problem exists in BTS SW older than RL60 MP2/RL45 MP2. plus timer expiry (20min). TS-SRAN-HW-0108 . plus SW upload only.3 Synchronization at Sync In/Sync Out ports is not available with FDSW. When using older BTS SW’s. After SW activation. FDSW will download target SW to system module only. RESTRICTIONS / KNOWN ISSUES 8.8. 8. FSMF running FDSW cannot generate or forward synchronization. manually entered autoconnection parameters are missed. Workaround Enter parameters manually in autoconnection dialogue. Workaround Manually reset auto configuration status and trigger again. eNB will repeat SW request towards NetAct after 30min. when RAT SW is activated. 2) Alternatively. Workaround 1) Uninstall WN6. After selecting ‘Update SW’.0 and all other version can stay). TS-SRAN-HW-0108 .0 BTS Site manager is launched in use.Page 15/17 © Nokia 2016 Version 5.0 BTS Site manager. connection procedure is stopped to ‘Reading Data’. install FDSW BTS Site manager (WN6. This will allow to use other installed BTS Site manager versions supporting FSMF.4 BTS Site manager cannot connect to FSMF equipped with FDSW When WN6.0 BTS Site manager is installed and no FD SW is installed.8.0 Confidential . the incompatible view is displayed and WN6. RU50 and RU50 EP1.9.0 Confidential . REFERENCES LTE Radio Access. Path: NOLS – CARE – Software Supply Tool – Software Catalog – Radio Network – Base Stations – FDSW Site Manager 10. Operating Documentation. Issue 02 WCDMA RAN. TD-LTE15A. Issue 02' TS-SRAN-HW-0108 . When this SW is ordered. Rel. 473494A (NOLS delivery) . FDD-LTE15A. Rel.Page 16/17 © Nokia 2016 Version 5. possible future updates will be delivered automatically without additional order.2. GSM 16. Operating Documentation. Operating Documentation. Issue 07 Single RAN. Issue 02 LTE Radio Access. Operating Documentation. NOTES None 11. Operating Documentation. Rel. ORDERING FDSW SITE MANAGER SW FDSW specific BTS Site Manager SW need to be ordered to make it visible to customers in NOLS. Pre-release. The ordering codes for FDSW Site Manager SW are . Rel. 473495A (DVD delivery) Having placed the order the FDSW Site Manager SW is downloadable in NOLS. SRAN 16. Issue 01' GSM/EDGE BSS. Rel. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.0 Confidential . NO WARRANTY OF ANY KIND. This document and its contents are provided as a convenience to You. You may not use this document in any manner and You are obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof. REVENUE. NON-INFRINGEMENT. BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT. and only as specified herein. and they are mentioned for identification purposes only. capacity. IS MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. Nokia is a registered trademark of Nokia Corporation. INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES. Copyright © 2016 Nokia Solutions and Networks. or if that Agreement has expired or has been terminated. ACCURACY. The document has been prepared to be used by professional and properly trained personnel. This document is Nokia Solutions and Networks’ proprietary and confidential information. and You assume full responsibility when using it. No part of this document may be used. IN NO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BE LIABLE FOR ANY DAMAGES. Any information or statements concerning the suitability. and it may not be used except for the purposes defined in the agreement between You and Nokia Solutions and Networks (“Agreement”) under which this document is distributed. copied. EITHER EXPRESS OR IMPLIED. BUSINESS INTERRUPTION. Nokia Solutions and Networks has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions. INDIRECT. Nokia Solutions and Networks does not warrant that the use of the software in the Product will be uninterrupted or error-free. TITLE. and Nokia Solutions and Networks reserves the right to change any such information and statements without notice. Nokia Solutions and Networks' total liability for any errors in the document is strictly limited to the correction of such error(s). TS-SRAN-HW-0108 . All rights reserved.Disclaimer The information in this document applies solely to the hardware/software product (“Product”) specified herein. INCLUDING BUT NOT LIMITED TO SPECIAL. If you have not entered into an Agreement applicable to the Product. Other product names mentioned in this document may be trademarks of their respective owners. RELIABILITY. EVEN IN THE CASE OF ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. and Nokia Solutions and Networks will correct errors that You identify in this document. INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY. modified or transmitted in any form or means without the prior written permission of Nokia Solutions and Networks. Nokia Solutions and Networks welcome Your comments as part of the process of continuous development and improvement of the documentation. reproduced. which may not be distributed or disclosed to any third parties without the prior written consent of Nokia Solutions and Networks. But. This document is intended for use by Nokia Solutions and Networks' customers (“You”) only.Page 17/17 © Nokia 2016 Version 5. SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT. DIRECT. fitness for purpose or performance of the Product are given solely on an “as is” and “as available” basis in this document.