Technical InformationProduct designation: ISO designation: Release date: 09/28/1999 Validation date: 1/21/2011 Thermoplex ALN 1001/00 LUBCON - Synthetic Gear Flow Grease Thermoplex ALN 1001/00 is synthetic gear flow grease for high temperatures based on synthetic hydrocarbons with a partly synthetic special thickener with high metal affinity. Quality features - high thermal and oxidation stability - high load factor - excellent wear protection - high service life and wide temperature range - optimum lubricating properties at low friction values Thermoplex ALN 1001/00 is generally used in rolling and sliding gears, in gears of electric tools, machine tools, actuating drives, needle bearings. TECHNICAL DATA acc. Standard DIN/ISO – Metric Units Color light beige Structure pasty Odor weak Base oil US – Standard Units PAO / Special Al-complex Base oil viscosity at 40°C (104°F) at 100°C (220°F) Density at 20°C (68°F) DIN EN ISO 3104 2 100 mm /s 466.5 SUS 2 DIN EN ISO 3104 14 mm /s 74 SUS 3 DIN 51 757 0.88 g/cm Worked penetration DIN 51 804 400 - 430 mm/10 Consistency class DIN 51 818 00 Dropping point DIN ISO 2176 200 C Boiling point 300 C Dynamic viscosity (cP) 390 F 570 F 1600 Temperature range -40 C to 150 C Mechanical load acc. To four ball apparatus (N) DIN 51 359 T 2 2600 Ignition temperature Flash point DIN ISO 2592 FZG-Test, Scuffling load stage A2, 76/50 -40 F to 302 F 300 C 570 F 200 C 390 F > 12 Original Packing 400 ml (14 oz) cartridge, 1 kg (2.2 lbs) can, 25 kg (55 lbs) pail, 180 kg (55 gal) drum ® LUBCON Turmo Lubrication, Inc. 5460 33 Street SE Grand Rapids, MI 49512 USA Tel: 616-575-6034 Fax: 616-575-6062 Toll Free: US & CAN 877-887-6658 Email: [email protected] Internet: www.lubconusa.com rd 1999): Avoid the contamination of soil and water. 12. Water Pollution Class WGK 1: Slightly water endangering (Classification according to German VwVwS from May. Use pumps or call the fire-brigade. Remove the patient to fresh air. polyurea. Former versions of this safety data sheet are no longer valid. See a physician* if necessary. Handling and store If the grease is exposed to high temperatures. carbon dioxide. Flush with plenty of water for at least 15 minutes. Aquatic toxicity: 1 (= German water hazard classification) 16.com Internet: www.0 Physical and chemical properties Hand protection: Respiratory protection: Eye protection: Not necessary in normal use. Collect the released product and the used absorbent materials in suitable containers for disposal (see sect. 17 02 99 D1 for wood. 6.0 Regulatory information No regulation and classification according to EEC directives necessary. See a physician* if the eye irritation remains.0 not classified not classified not classified not classified not assigned not assigned ® LUBCON Turmo Lubrication.N.2 LUBRICANT CONSULT GMBH Company of origin Gutenbergstraße 13 identification 63477 Maintal GERMANY 2. Avoid breathing the vapors above the decomposition temperature. LAGA. the vapor can involve toxic compounds (carbon monoxide). All data refer to the product in the delivering condition. 5460 33 Street SE Grand Rapids. In the case of misuse at temperatures above the decomposition temperature harmful vapors may arise from the product. If grease has penetrated skin by force (in case of misuse of a grease press): See a physician* immediately. cleaning rags and protection clothes contaminated with grease or oil. strong acids. 4. Thermoplex ALN 1001/00 Skin contact: Tel. 542 09 for solid materials contaminated with grease or oil. Avoid contact with fire and sparks. strong alkalics.0 11.Waste code number (Germany): 542 02 for waste lubricants. The company is not responsible for damages caused by the use of the product in applications for which it was not intended or for conditions of use outside its control.com rd .0 Exposure control / Personal protection *Show the physician this safety data sheet. foams. sand or other inert materials). Physical state: Color: Odor: Dropping point: Boiling point: Density Viscosity (basic oil): pasty light beige weak >200 C (>390 F) >300 C (>570 F) 3 0.0 Composition Combination of synthetic hydrocarbons.lubconusa.0 Store in cool and dry areas.1 Product name 1.88 g/cm 100 mm2 / s 2 14 mm / s insoluble not determined >200 C (>390 F) >300 C (>570 F) lower: 0. 3. Materials to avoid contact: strong oxidizing agents (liquid oxygen).0 Eye contact: First aid measures Ingestion: Inhalation: 5.0 Hazards identification The product when properly handled is not dangerous for the human health. Disposal considerations Destroy the waste product by incineration according to local laws and regulations. MI 49512 USA Tel: 616-575-6034 Fax: 616-575-6062 Toll Free: US & CAN 877-887-6658 Email: inquiry@lubconusa. When often handling the product wear rubber gloves Not necessary in normal use. Avoid the uncontrolled discharge in sewage systems. Ecotoxicological information Use the product according to the good working practices avoiding polluting the environment. It is given in good faith and based on the best knowledge and experience of the company at the date of issuing. glass and plastics containing grease or oil (for example: residuals of grease in plastic tubes). No labeling with hazard symbols.0 Fire fighting measures Suitable extinguishing media: dry chemicals. Do not smoke while handling released liquids. Thermoplex ALN 1001/00 has no known effects of chronic toxicity or carcinogenesis (Based on data from components). In the case of fire. Harmful effects are expected only in case of misuse especially in case of thermal decomposition. good ventilation in the working areas is commendable. Use a respirator to protect from vapors. Keeping quality in original drums for the storage conditions mentioned above: minimum 5 years.-number: Packaging group: 15. Do not use water. 7. measures Do not eat.6 Vol-% Solubility in water: pH-value: Flash point: Ignition temperature: Explosion limits: 10. in surface and underground waters. 9.0 13. Do not induce vomiting.Material Safety Data Sheet – MSDS acc.0 Accidental release measures Absorb small amounts on inert material.0 DIN ISO 2176 at 20 C (68 F) DIN 51 757 at 40 °C (100 F) DIN EN ISO 3104 at 100 °C (212 F) DIN EN ISO 2592 upper: 6. 13). 8. if necessary.0 Further Information The information given in this safety data sheet is for safety purpose only. Inc. Avoid the contact of sparks and flames. 14.5 Vol-% (for oil mist) Thermal decomposition: > 200 C (>390 F) Hazardous decomposition products: No decomposition under normal storage and handling conditions. 2001/58 EEC 1. Hold back large amounts of liquids by embankment (mound of earth. Wear safety glasses. drink and smoke in working areas. if necessary.Waste code number (European Community): 12 01 12 for used waxes and greases 15 02 99 D1 for used absorbent and filter materials.: +49 6109/7650-0 FAX: +49 6109/7650-51 Wash with water and soap. oral: LD50 > 3000 mg/kg (rat) 3 limit value for mist oil: 5 mg/m Toxicological information Thermoplex ALN 1001/00 when properly handled is not dangerous for human health. Not necessary in normal use. Remove contaminated clothing. Stability and reactivity Experimental toxicological data. EWC. powder. aluminum-soap and additives.0 Transport information The product is not dangerous for transportation Road transportation: (ADR) Rail transportation: (RID) Sea transportation: IMDG / IMO Air transportation: ICAO / IATA U.