SWAGWLOK LAP FLANGE.pdf

www.swagelok.com F lan g e Ad apters ■ Threadless, weldless transition from flanged piping systems to tubing systems ■ Flange types meet ASME, DIN, EN, and JIS standards ■ One-piece integrally machined forged body ■ Available with Swagelok® tube fitting end connections up to 50 mm and 2 in. are available upon request. and JIS standards ■ Range of flange sizes and pressure classes ■ Full range of sealing faces including flat face. and tongue-and-groove ■ 316 stainless steel material standard. MS‑06‑62. . Cleaning and Packaging All Swagelok flange adapters are cleaned in accordance with Swagelok Standard Cleaning and Packaging (SC-10). Regulatory Compliance Stainless flange adapters with EN. ■ Metric and fractional Swagelok tube adapter fittings from 6 to 50 mm and 1/4 to 2 in. and over 25 mm stainless steel fittings use stainless steel ferrules with PFA coating.  Applications above 450°F (232°C) require silver-plated front ferrules and uncoated back ferrules. optional materials Wrench flats include alloy 20. and ANSI flanges have been shown through type-test approval TÜ/TÜV A/AR 278-03 to comply with the European Pressure Equipment Directive (PED) and the leakage requirement of TA-LUFT 2002.5 ■ Nominal flange sizes from NPS 1/2 to 2 in. alloy 400. raised face. One-piece forged body Flange Materials Material 316 stainless steel➀ Alloy 20 Alloy 400 Alloy 600 Alloy C-276 ➀  Over 1 in. Flange Connections ■ ASME B16. To order fittings with silver-plated ferrules and uncoated back ferrules. and alloy C-276 ■ Wrench flats for ease of tube fitting assembly ■ Gaugeability on initial installation using Swagelok gap inspection gauges End Connections ■ Metric and fractional Swagelok tube fittings from Sealing face 3 to 50 mm and 1/16 to 2 in. RTJ. According to the PED. EN. Example: SS-6M0-F25M-40-C -BM ASTM Specification A182 B462 B564 such as API and ISO. flange adapters are classified as piping components and may not bear the CE-marking. ■ Pressure class ratings from 150 to 2500 ■ DIN EN 1092-1 ■ Nominal flange sizes from DN 15 to 50 ■ Pressure class ratings from PN 40 to 320 ■ EN 1092-1 ■ Nominal flange sizes from DN 15 to 50 ■ Pressure class ratings from PN 40 to 100 ■ JIS B2220 ■ Nominal flange sizes from DN 15 to 50 ■ Pressure class ratings from 10 to 63K ■ Flange adapters to meet additional standards. DIN. add -BM to the ordering number.2 Flange Adapters Features ■ Flange types meet ASME. alloy 600. DIN (up to PN 160). 3 87.19 0.7 144.38 1.1 263.50 1.4 147.12 4.2 25.50 4.00 0.5-2003.2 1500 248.4 7.33 2.0 208.4 29.50 1.7 249.2 56.75 3.6 149.2 40.62 0.00 4.3 166.9 240.7 2.66 E 0.7 91.25 6.09 1.3 29.8 28.5 5.4 6.79 1.2 41. Working Pressures by Classes.2 240.2 64.2 14.0 84. in.6 211.00 6. 1/4 3/8 E J B ANSI Flange Ordering Number NPS Class Raised Face Flange 1/2 1/2 1/2 1 2 1 1 2 2 150 150 300 SS-400-F8-150 SS-600-F8-300 SS-810-F8-150 SS-810-F16-150 SS-810-F32-150 SS-1210-F16-150 SS-1610-F16-150 SS-2400-F32-150 SS-3200-F32-150 Dimensions.8 63.8 13.62 2.2. Table 2-2.0 192.38 2.1 42.0 71.7 59.0 900 148.2 143.40 4.98 2.3 38.8 297.3 47.64 J 2.88 1.50 3.7 28.7 12. bar Temperature °C –29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 ASME Class 150 19.1 10.9 351.4 151.2 145.75 1/2 3/4 1 1 1/2 2 Pressure-Temperature Ratings Ratings are taken from ASME B16.34 1.96 1.97 2.6 88.3 57.2 400 66.0 89.3 126.9 158.7 400.75 3. flat H Tube OD in.3 242.5 86.61 1.81 1 1/4 1 3/8 2 1/8 2 3/4 0.9 29. A 1.38 3.4 16.3 8.6 115. ANSI Flanges D A F.9 30.2 and Table F2-2.1 94.6 44.4 39.66 0.5 4.25 4.2 38.9 58.23 1.3 51.58 1.25 6. psig Temperature °F –20 to 100 200 300 400 500 600 650 700 750 800 850 900 950 1000 ASME Class 150 275 235 215 195 170 140 125 110 95 80 65 50 35 20 300 720 620 560 515 480 450 440 435 425 420 420 415 385 365 400 960 825 745 685 635 600 590 580 570 565 555 555 515 485 600 1440 1240 1120 1025 955 900 885 870 855 845 835 830 775 725 900 2160 1860 1680 1540 1435 1355 1325 1305 1280 1265 1255 1245 1160 1090 1500 3600 3095 2795 2570 2390 2255 2210 2170 2135 2110 2090 2075 1930 1820 2500 6000 5160 4660 4280 3980 3760 3680 3620 3560 3520 3480 3460 3220 3030 Working Pressures by Classes.4 300 49.4 31.1 154.0 245.90 0.6 48.75 4.5 50.2 84.0 18.38 3.11 B 3.2 278.90 2.3 96.5 178.8 39.9 144.60 0.41 13/16 D 0.9 38.7 33.6 33.2 9.12 3.3 66.9 235.0 100.6 30.8 58.4 86.4 600 99.2 61.7 57.5 35.5 38.2 37.28 F 13/16 13/16 H 1.78 1.4 252.5 257.8 1.7 75.9 .69 1.1 28.5 2500 413.32 1.6 320.5 107.8 60.6 3.9 92.4 238. Pressure ratings for fittings with a flange end connection and another end connection are determined by the connection with the lower pressure rating.3 56.Flange Adapters 3 Ordering Information and Dimensions Dimensions are for reference only and are subject to change.4 140.5 42.9 125.90 2.4 77.12 4. 8 62.8 33.5 50.01 4.1 21.5 50.28 13/16 0.2 32 35 55 70 22.1 21.1 21.37 1.74 B D 0.66 0.54 4.4 31.5 20 D 15.4 31.91 2.8 9. Pressure Class PN 40 D A F.62 1 1/4 1.0 115 115 165 165 24.8 53.8 24.4 45.5 55.7 43.0 90.5 20 D 15.43 2.0 115 115 165 165 24.5 SS-18M0-F15A-10K-RF 48.83 1.8 F 20 H 40.4 40.10 95.0 70.4 65.0 115 165 95.7 66.8 62.2 41.72 70.7 43.7 51.5 SS-25M0-F25A-10K-RF 61.3 49.0 65.92 6.3 51.0 85.3 38.7 66.41 F H 1.81 2 3/4 2. flat H Tube OD mm 6 12 DIN Flange Size DN 25 15 25 50 15 25 25 50 50 Ordering Number Raised Face Flange SS-6M0-F25M-40-C SS-12M0-F15M-40-C SS-12M0-F25M-40-C SS-12M0-F50M-40-C SS-18M0-F15M-40-C SS-18M0-F25M-40-C SS-25M0-F25M-40-C SS-38M0-F50M-40-C SS-50M0-F50M-40-C Dimensions mm A 47.3 51.0 125 3.0 85.8 20 32 35 36.4 48.0 125 65.5 48.0 .0 15.2 41.0 85.1 38.3 E 0.0 15.96 1.8 64.0 90. flat H Tube OD 1/4 3/8 1/2 3/4 1 2 12 18 25 JIS Flange Size DN Ordering Number Raised Face Flange SS-400-F15A-10K-RF Dimensions A 1.4 45. mm SS-12M0-F15A-10K-RF 46.0 25 50 15 15 25 Dimensions.51 0.0 65. in.5 15.5 48.23 2.40 4.3 49.72 1. DIN Flanges.88 1 3/8 1.19 0.60 0.66 22.0 85.7 45.8 3.90 0.4 40.0 90.3 J 85.3 E 4.8 53.8 F 20 H 40.4 103 B 115 95.0 115 165 95.7 45.8 33.2 32 35 55 70 22. flat H Tube OD mm 6 EN Flange Size DN 25 15 25 50 15 25 25 50 50 Ordering Number Raised Face Flange SS-6M0-F25E-40-B1 SS-12M0-F15E-40-B1 SS-12M0-F25E-40-B1 SS-12M0-F50E-40-B1 SS-18M0-F15E-40-B1 SS-18M0-F25E-40-B1 SS-25M0-F25E-40-B1 SS-38M0-F50E-40-B1 SS-50M0-F50E-40-B1 Dimensions mm A 47.0 125 125 E J B 12 18 25 38 50 JIS Flanges.0 85.4 103 B 115 95. Pressure Class 10K D A F.54 9.92 1.3 J 85.1 38.4 65.8 64.0 125 65.7 51.8 9.Flange Adapters 4 Ordering Information and Dimensions Dimensions are for reference only and are subject to change.0 95.66 1.3 E 4.0 85.0 125 125 E J B 18 25 38 50 EN Flanges. Pressure Class PN 40 D A F.4 31.5 55.76 J Dimensions. E J B 15 SS-600-F15A-10K-RF SS-810-F15A-10K-RF SS-1210-F15A-10K-RF SS-1610-F25A-10K-RF SS-3200-F50A-10K-RF 0. 40 . Build a special-order flange adapter by combining the designators in the sequence shown below. and over 25 mm tube adapter fittings are furnished with nuts and preswaged ferrules. select an ordering number from the tables on page 3 and 4. 8-MTA = 8 mm 8-TA = 1/2 in. EN. Special-Order Flange Adapters For standard stainless steel flange adapters. To order fittings with silver-plated ferrules and uncoated back ferrules.C Flange Material SS = 316 stainless steel➀ C20 = Alloy 20 M = Alloy 400 INC = Alloy 600 HC = Alloy C-276 use stainless steel ferrules with PFA coating. Pressure Class ANSI 150 = 150 900 = 900 300 = 300 1500 = 1500 600 = 600 2500 = 2500 DIN 40 = PN 40 160 = PN 160 63 = PN 63 250 = PN 250 100 = PN 100 320 = PN 320 EN 40 = PN 40 63 = PN 63 100 = PN 100 JIS 10K = 10 kg/cm2 30K = 30 kg/cm2 16K = 16 kg/cm2 40K = 40 kg/cm2 20K = 20 kg/cm2 63K = 63 kg/cm2 Flange Standard A = JIS E = EN M = DIN N o designator = ANSI Nominal Flange Size Fractional (ANSI) Metric (DIN. 3M0 = 3 mm 200 = 1/8 in. F25 = DN 25 F24 = NPS 1 1/2 in. SS . and over 25 mm stainless steel fittings End Connection Size Swagelok Tube Fitting Fractional Metric 100 = 1/16 in. F15 = DN 15 F12 = NPS 3/4 in. contact your authorized Swagelok sales and service representative for more information.6M0 . 22M0 = 22 mm 3200 = 2 in. 10M0 = 10 mm 810 = 1/2 in. 6M0 = 6 mm 400 = 1/4 in. 20M0 = 20 mm 2400 = 1 1/2 in. and tongue-and-groove. 6-MTA = 6 mm 6-TA = 3/8 in. including flat face. F50 = DN 50 F32 = NPS 2 in.F25 M . JIS) F8 = NPS 1/2 in. RTJ. 10-MTA = 10 mm 12-TA = 3/4 in. add -BM to the ordering number. 12M0 = 12 mm 1210 = 3/4 in. F20 = DN 20 F16 = NPS 1 in. 25M0 = 25 mm 28M0 = 28 mm 32M0 = 32 mm 38M0 = 38 mm 50M0 = 50 mm Swagelok Tube Adapter➀ Fractional Metric 4-TA = 1/4 in. 18-MTA = 18 mm 24-TA = 1 1/2 in.5 Flange Adapters Ordering Information. 18M0 = 18 mm 1610 = 1 in. 8M0 = 8 mm 600 = 3/8 in. 22-MTA = 22 mm 25-MTA = 25 mm 28-MTA = 28 mm 32-MTA = 32 mm 38-MTA = 38 mm 50-MTA = 50 mm ➀  Over 1 in.  Applications above 450°F (232°C) require silverplated front ferrules and uncoated back ferrules. Example: SS-6M0-F25M-40-C -BM ➀  Over 1 in. Sealing Face (Raised Face Standard) ANSI (no designator) DIN C See DIN EN 1092-1 for D surface finish details E EN B1 See EN 1092-1 for B2 surface finish details JIS RF For other sealing faces. 20-MTA = 20 mm 32-TA = 2 in. 12-MTA = 12 mm 16-TA = 1 in. . Example: SS-6M0-F25M-40-CBT Tube Fitting Lap Joint Stubs Stainless steel lap joint connectors are available for use with 1/2 in.4 µm) SS-10M0-1-0005 Swagelok Tube Fittings See the Swagelok Gaugeable Tube Fittings and Adapter Fittings catalog. Warranty Information Swagelok products are backed by The Swagelok Limited Lifetime Warranty. Safe Product Selection When selecting a product. the total system design must be considered to ensure safe. To order. material compatibility. R5 MS-02-200 . Select an ordering number.. Tubing Data See Swagelok Tubing Data. Function. Tube Benders See the Swagelok Tubing Tools and Accessories catalog. Swagelok—TM Swagelok Company © 2003–2011 Swagelok Company Printed in U. and maintenance are the responsibilities of the system designer and user. for more information on tubing data. Tube Sealing Surface OD Finish (Ra) 3/8 in. Tubing Products Swagelok also offers a wide variety of tubing products. For a copy. lap joint pipe flange adapters.S. adequate ratings. 10 mm Ordering Number 125 to 250 µin. MS‑01‑107.A. Caution: Do not mix or interchange parts with those of other manufacturers. GLI August 2011. for more information. visit swagelok. for more information. proper installation.com or contact your authorized Swagelok representative. trouble-free performance. Contact your authorized Swagelok representative for details.Options Bored-Through Flange Adapters for Thermocouples and Dip Tubes Swagelok bored-through flange adapters with Swagelok tube fitting ends accommodate thermocouples or dip tubes. operation. MS‑01‑179. MS‑01‑140.2 to 6. add BT to the ordering number. SS-600-1-0151 (3. for more information. Multihead Hydraulic Swaging Unit See the Swagelok Gaugeable Tube Fittings and Adapter Fittings catalog. MS‑01‑140.