SENTRY RB System Technical Specifications V2

March 24, 2018 | Author: Cristian Popescu | Category: Radio, Transmitter, Antenna (Radio), Microwave, Battery (Electricity)


Comments



Description

SY T N E R SENTRY RB Wireless Intrusion Detection System System Specification SECURITY SOLUTIONS FOR BORDER AND CRITICAL INFRASTRUCTURE PROTECTION 1 Contents 1. 2. 3. 4. 5. Introduction..............................................................................................................................3 Overview ..................................................................................................................................3 Application Areas .....................................................................................................................4 Key Features .............................................................................................................................4 Main Components ....................................................................................................................5 Detection Devices ..................................................................................................5 5.1. 5.1.1. RS-U Multi-Sensor......................................................................................................5 5.1.2. RS-U Tracking Multi-Sensor .......................................................................................6 5.1.3. RS-U v.2.0 Compact Seismic Sensor ..........................................................................9 5.1.4. RS-IK Infra-Red Sensor ...............................................................................................9 5.1.5. RS-L Microwave Sensor ...........................................................................................10 5.2. Autonomous Video Surveillance Sub-System ......................................................12 5.2.1. RS-TV TV Sensor .......................................................................................................12 5.2.2. RS-TP Thermal Imager .............................................................................................13 5.2.3. PTV Portable TV Receiver ........................................................................................15 5.3. Controlling and Receiving Devices .......................................................................16 5.3.1. MPO Portable Operator’s Console ..........................................................................16 5.3.2. “GIS SENTRY RB” Command and Control Software ................................................17 5.3.3. KOPR Control Receiver ............................................................................................18 5.4. Other Equipment .................................................................................................19 5.4.1. TV-BPO TV Control Station ......................................................................................19 5.4.2. TV-R TV Repeater.....................................................................................................19 5.4.3. MR Trunk Repeater .................................................................................................20 5.4.4. KM Cartridge with Twin-cord Microwire .................................................................21 5.4.5. VIP-1026 External Battery .......................................................................................21 5.4.6. VIP-1013 External Battery .......................................................................................22 5.4.7. VIP-1272 External Battery .......................................................................................22 5.4.8. ASh-433 433 MHz Whip Antenna ............................................................................23 5.4.9. AShV-433 433 MHz Long Whip Antenna .................................................................24 5.4.10. KBV-433 433 MHz Cable Antenna ...........................................................................25 5.4.11. AMSh-433 433 MHz Magnetic Base Whip Antenna ................................................26 5.4.12. BSL Liner Interface Box ............................................................................................27 6. Conclusion .............................................................................................................................28 2 or be integrated into other security solutions. Our innovative approach in UGS design enabled us to overcome the limitations and build a system that can be used efficiently not only in defense. etc. SENTRY RB can be used as a standalone system. This whitepaper introduces the SENTRY RB Autonomous Intrusion Detection System. The network consists of two-levels: lower level networks and higher level networks. The SENTRY RB Wireless Intrusion Detection System includes detection devices based on different physical principles of operation (seismic. industry and private security. This system is based on Unattended Ground Sensors (UGS). UGS systems have long been used in defense.). thus enabling transmission of alarm and service data to a practically unlimited distance. Overview SENTRY RB Wireless Intrusion Detection System is a battery operated wireless intrusion intrusion detection system with unrivaled detection and autonomous operation time parameters for use in homeland. including ground radars. but due to various technology limitations had very little application in other areas. Devices installed on the terrain form a mesh network. All components of the system are linked into a radio network. industry and private security. But there are very few good options if the perimeter is many kilometers long and the area you wish to monitor has neither power nor communication infrastructure. while higher level networks are used for linking several lower networks together or for increasing communication range of the whole system. 2. Proprietary two-way radio protocol guarantees delivery of alarm messages. As of today the System is securing over 2000 km of State Borders. Introduction The market offers huge variety of electronic and optical systems for perimeter protection and area surveillance. Location of sensors and alarms are displayed on a digital map. infra-red. PTZ cameras and CCTV systems. SENTRY RB is a reliable. 1800 km of pipelines and over 400 km of facilities’ perimeters worldwide. video surveillance devices and command and control devices. 3 . The system has proven its reliability in a wide range of climatic conditions: from permanent frost of Yakutia to scorching heat of North Africa. and the only efficient solution for areas with no power and communication infrastructure.1. simple and flexible solution for perimeter surveillance. Lower level networks are used for detection devices. but also in homeland. microwave. The system can be fully controlled by its handheld and PC-based receivers. where each detection device operates as a repeater. 4 . Wireless communication between all system components: all detection devices function as communication nodes in selfconfiguring mesh network. Can be used as a standalone self-contained System or be integrated into any other existing perimeter surveillance systems on software and hardware levels. Unrivalled detection range for seismic detection devices.3. Key Features Low-power consumption High performance Mesh network Reliability Ergonomics / Easy deployment and maintenance Flexibility Easy Integration Unequalled battery life of detection devices – up to 5 years of autonomous operation. Variety of detection principles making the System flexible and suitable for a wide range of applications. Ability to deploy and remove the detection line on any terrain (including mountains) in literary a few hours due to its light weight. Wireless transmission of information via a two-way secure radio channel to an unlimited distance with a guaranteed delivery of alarm messages. Application Areas The main fields of application of the system are the following:      Border Surveillance Pipeline Security Perimeter Protection Rapidly Deployable Perimeters Critical Infrastructure Security 4. small size and simplicity of installation/maintenance. 1. Any RS-U can be connected to a PC.borne intruder and/or a vehicle by seismic noise they produce. Operation modes  Seismic detection device. For this purpose.5. The detection zone is circular.  Detection radius in seismic mode – up to 100 m for pedestrians. When several RS-Us are installed. connected to the RS-U Sensor. an inbuilt microprocessor starts processing the seismic signal and generates alarm signals only if the seismic pattern is similar to a person’s steps or vehicle movement.  Operates under snow. How it works After the RS-U is connected to the battery.  Tripwire detection device – The detection zone is created by spreading a micro wire from 2 coils. radio exchange routes are set automatically. The connected sensor exchanges data between the radio network and the mapping system. its location must be recorded in the memory of the KOPR Handheld Control Receiver. Only the antenna is left on the surface appearing like a thin wire. The RS-U has a provision for micro wire coils connection. Detection Devices 5. When the RS-U is deployed. 5 .  Repeater.  Communication Unit – Receiver of alarm and system data from other sensors when connected to a PC. The RS-U with the battery is installed underground.1. 30 to 50 cm deep.  Light weight and small size.  Unattended operation on a single battery – up to 5 years. the Handheld Control Receiver is equipped with an inbuilt GPS device. Main Components 5. In real conditions it’s virtually impossible to detect the location of an installed RS-U sensor. RS-U Multi-Sensor The RS-U is designed for detecting a foot. This allows to display the deployed sensors on a digital map and remotely control their settings and modes. 1500 m each. up to 200 m for vehicles.1. does not require seasonal adjustments and regular maintenance.  External device control unit – When detecting an intruder. Features  Concealed installation in any type of ground. the RS-U Sensor actuates any device connected to it for a preset time.  Real time plotting of intruder’s movement trajectory.  Real time measurement of intruder’s speed. vehicle. the RS-U sends a warning message requesting battery replacement. if needed.8 V Approx. group of pedestrians. For operation in Tracking Mode the unit should be equipped with SV External Sensor. the RS-U continues to operate for two more weeks. Features of operation in Tracking Sensor Mode (in addition to features of RS-U Intrusion Multi-Sensor):  Classification of 3 intruder types: single pedestrian. 0. the background seismic noise level can be determined in real time mode.8 kg 70×130 mm 5. If the battery level drops to a critical level.1. In this mode. When setting the sensitivity level of the seismic detection device. Parameters Parameter Seismic detection range: pedestrian vehicle Power supply by external battery with nominal voltage Operation time when powered by VIP-1026 External Battery Radio channel frequency Radio channel type Communication range between two RS-U Multi-Sensors under conditions of direct visibility and depending on the type of antenna Detection probability Time between failures IP rating Operating temperature range Weight Dimensions (height×diameter) (excluding projecting parts): Value up to 100 m up to 200 m 10. 5 years 433.9 80 000 h IP68 from -40 °C to +50 °C max. RS-U Multi-Sensor (with tracking option) This version of RS-U Multi-Sensor can be used as point detection or tracking device.6 MHz two-way digital radio channel from 1 to 15 km 0.2−434. This mode allows to quickly define the detection range of the sensor and. 6 .2. adjust the required detection radius. the sensor transmits to the receiver the accumulated seismic noise level data in relative values.Settings adjustment and mode selection is carried out via a radio channel by means of the Handheld Control Receiver or PC based Operator’s Console (PORT). After sending the message. Picture 1.How it works (in Tracking Sensor Mode) The tracking sensors are placed within each other’s detection zones. The overlap of the Sensor’s Detection Zones creates the Tracking Zone. The first crossing point of two bearings marks the beginning of the track. drawing the intruder’s track on the digital map. the system keeps marking new crossing points of the bearings. As the intruder moves on. RS-U Tracking Multi-Sensor application example 1 – Intruder moving alongside the border. Each tracking sensor gets a bearing to the detected intruder and sends it via radio channel to PC-based Command and Control Device running the “GIS SENTRY RB” Command and Control Software. 7 . Parameters Parameter Value Seismic detection range: pedestrian up to 100 m vehicle up to 200 m Power supply by external battery with nominal voltage 10.8 kg Dimensions (length × width × height) 117 x 62 x 58 mm (excluding projecting parts) 8 .6 MHz Radio channel type two-way digital radio channel Communication range between two RS-U Multi-Sensors from 1 to 15 km under conditions of direct visibility and depending on the type of antenna Detection probability 0. 0. 3 years Radio channel frequency 433. The extra information provided by the tracking mode makes the system ideal for narrow state borders and applications requiring information on the target’s speed and direction. As illustrated in the examples above.Picture 2.2−434. RS-U Tracking Multi-Sensor application example 2 – Intruder crossing the border. with the help of the new RS-U Tracking MultiSensors the operator can identify real intrusions (when an intruder crosses the border line) and send patrols out only when it is necessary thus saving costs and patrols.8 V Operation time when powered by VIP-1026 External Battery Approx.9 Time between failures 80 000 h IP rating IP68 Operating temperature range from -40 °C to +50 °C Weight max.  Mobility – can be quickly deployed. but all the features are packed in a much smaller case.2. birds and other interference sources.9 Time between failures 80 000 h IP rating IP68 Operating temperature range from -40 °C to +50 °C Weight 0.1.6 MHz Radio channel type two-way digital radio channel Communication range between two RS-U/2.0 Multi-Sensor The RS-U v. RS-U v. It is intended for shortterm force-protection and area surveillance operations.2−434. It can be deployed both underground and on ground surface.0 is a compact version of RS-U Multi-Sensor.3. To reduce the likelihood of false alarms triggered by animals.).0 Multi-Sensors from 0. tree trunks.25 years Radio channel frequency 433. It is powered by inbuilt rechargeable battery. Parameters Parameter Value Seismic detection range: pedestrian up to 100 m vehicle up to 200 m Power supply inbuilt rechargeable battery Unattended operation time on a single charge over 0.5 kg Dimensions 94 × 86 × 77 mm 5.  Compact size and light weight. detection zone height – up to 2 m. etc. Features  A three-degree-of-freedom bracket allows to install Infra-Red Sensors on any surface (soil humps. How it works The Infra-Red Sensor detects variations of the temperature background in a very narrow elongated zone and generates an alarm signal.  Autonomous operation for up to 3 years.5 to 15 km under conditions of direct visibility and depending on the type of antenna Detection probability 0. and an in-built processing algorithm generates an alarm signal only if certain signals are 9 .4. vehicle – up to 100 m. RS-IK Infra-Red Sensor The RS-IK Infra-Red Sensor is designed for setting up detection lines with a narrow detection zone. Operation time on a single battery charge is at least 3 months.  Detection zone width – up to 3 m.1. variations are registered in two sectors.5. rocks.  Detection zone length: foot-borne intruder – up to 50 m.2. It has the same functionality and operation modes. moved by the wind) in the detection zone to avoid false alarms.0° min. RS-L Microwave Sensor The RS-L Microwave Sensor is designed for detecting a footborne intruder and/or a vehicle by variations in the electromagnetic field. The PRM unit has an inbuilt radio modem to transmit alarm data and control the Microwave Sensor (adjustment and threshold setting).  Light weight and small size.1.2−434. Features  The length of the RS-L detection zone of a foot-borne intruder or a vehicle is from 3 to 100 m (200 for RS-L/200 version). time and amplitude characteristics to the signal triggered by a human crossing the beams. How it works After connecting the battery.5 years 433. 2.  The operating life on a single battery is up to3 years.5 kg 157×84×68 mm 5. the Microwave Sensor goes to the standby mode.received. 12 V Up to 3 years Up to 1. 5.5 to 15 km 80 000 h IP65 from -40 °C to +50 °C 0. 50 m min. 10 .8. Parameters Parameter Detection range Observation angle: horizontally vertically Power supply by external battery with voltage Operation time when powered by VIP-1013 External Battery Operation time when powered by VIP-1272 External Battery Radio channel frequency Radio channel type Communication range Time between failures IP rating Operating temperature range Weight Dimensions (length×width×height) (excluding projecting parts) Value min. After the Infra-Red Sensor is installed and activated it needs to be turned along the detection line in such a way that there wouldn’t be any moving objects (for instance. similar in shape. The Microwave Sensor consists of a transmitting (PRD) and receiving (PRM) units between which an electromagnetic field is formed.5.2° 10.6 MHz two-way digital radio channel from 0. The receiving and transmitting units are powered by autonomous power sources. 6 m receiver and transmitter installation Detection zone width depending on distance of up to 3 m receiver and transmitter installation Radio channel frequency 433. point of crossing the zone.2−434.The transmitting and receiving units are located at the opposite ends of the secured area. The receiving unit receives the waves and analyses the received signal. Parameters Parameter Value Power supply by external battery with voltage 12 V Detection zone max. A human or another object crossing the detection zone causes variations in the received signal. length 10 m Detection zone height depending on distance of up to 1. 10 s Operation time when powered by VIP-1013 External Up to 3 years Battery Number of frequency sub-channels 2 Detection probability 0. The amplitude and shape of the variations depend on the height and weight of the person. If the parameters of the variations correspond to the preset ones. length 100 m (200 m for RS-l/200 version) Detection zone min.5 to 5 km between RS-L Microwave Sensor and KOPR Control Receiver depending on the type of antenna Standby mode set-up time max. the receiving unit generates an alarm message. zone relief and the object speed. The transmitting unit sends electromagnetic waves in the direction of the receiving unit. 2500 h IP rating IP54 Operating temperature range from -40 °C to +50 °C Weight max.98 Time between false alarms min.6 MHz Radio channel type two-way digital radio channel Communication range in conditions of direct visibility from 0. 6 kg Dimensions (length×width×height): PRM Receiver Unit 150×120×55 mm PRD Transmitter Unit 150×120×55 mm 11 . the operator needs to see what is happening on the detection line to define the number of intruders. It can be fixed to a tree.     How it works The camera is attached to any landscape elements using a set of mounting rig. PTV Portable TV Receiver and TV-BPO TV Control station. 5.2. All the camera elements are installed in a concealed way. a power transmission tower.1. rocks or natural elevations within the secure area.  Takes no more than 10 minutes for one person to install one camera. Features Operates on one battery for up to 6 months. Since the camera is equipped with a radiomodem. This high-sensitivity camera equipped with infrared backlight enables the operator to detect a camouflaged person moving against the background of vegetation in any time of day (day and night) within the distance of 100 m. Transmits video data via a radio channel. The video sub-system can be installed fast and covertly on the detection line and when triggered by other sensors it can provide the system operator with visual information on the secure area.  Small dimensions and light weight.5. RS-TV TV Sensor This is a battery-operated TV camera capable of transmitting real-time video feed (25 frames/second) via a radio channel. Most of the time video camera is in standby mode and is activated by operator or by signals from sensors received via radio-modem. Autonomous Video Surveillance Sub-System In some cases it is not sufficient just to receive a signal from the sensors. Antenna of the camera should be placed within line-of-sight of receiver antenna or repeater antenna. direction of their movements and see if the intruders are armed. Wireless Battery-operated Video Surveillance Sub-System consists of: RS-TV TV sensors with infrared backlight. For instance the system can be used to video record a fact of an unauthorized pipeline hookup or a state border violation. The rechargeable battery can be placed nearby or buried underground (thus increasing operating life in low temperatures). TV-R TV repeaters. it functions within the System as an independent device that can be controlled 12 . stones. Activated by operator’s command or by a sensor.2. All-weather casing (allows to use it in any climate conditions in temperatures ranging from -40 to +50 °С and humidity of up to 95%). individually. 0. The camera starts transmitting video data for a set period of time and then goes into “standby mode”. darkness. 6 months black and white.2. or heat-permeable barriers. which allows to establish fact of pedestrian presence in monitored area.2. which allows to identify pedestrian personality based on his/her appearance) TV camera observation angle: horizontally vertically Power supply by external battery with voltage Time of continuous operation without enabling searchlight Time of continuous operation when enabling searchlight Continuous operation time in standby mode Sensor type Sensor diagonal. 12 h min. After the activation signal is received from an inbuilt modem.2−434. count number of people or determine position of a raised hand) Identification range (distance. 6 h min.0° 12. RS-TP Thermal Imager RS-TP Thermal Imager is a battery operated thermal camera that detects body heat of intruders through smoke.6 MHz two-way digital radio channel 2. The image of the area within the detection zone of RS-TP is transmitted to receiving equipment via radio channel. 13 . It’s possible to set which radio sensors will activate the camera and for how long it should run when activated.4 GHz one-way channel. inch Time between failures Radio channel frequency Radio channel type Video channel frequency Communication range IP rating Operating temperature range Weight: TV camera TV transmitter Dimensions (length×width×height) (excluding projecting parts): TV camera TV transmitter Value min. 100 m min. 1. the camera processor activates the camera and video data channel.7 kg 170×130×60 mm 140×90×55 mm 5. Parameters Parameter Detection range (distance.0 kg max.5° 12 V min. The camera uses a 2.5 80 000 h 433.414−2.5 to 3 km IP67 from -40 °C to +50 °C max. 20 m 20.468 GHz from 0. CCD 0. Activated by operator’s command or by a sensor. Antenna of the camera should be placed within line-of-sight of receiver antenna or repeater antenna.  Small dimensions and light weight. stones. After the activation signal is received from an inbuilt modem. 12 h min.6 MHz two-way digital radio channel 2. All the camera elements are installed in a concealed way.  Takes no more than 10 minutes for one person to install one camera. it functions within the System as an independent device that can be controlled individually.468 GHz from 0. Since the camera is equipped with a radiomodem.5 to 3 km IP67 from -40 °C to +50 °C 14 . group of people. The camera starts transmitting video data for a set period of time and then goes into “standby mode”.0° min. Transmits video data via a radio channel. Parameters Parameter Detection range for pedestrian. a power transmission tower.     How it works The camera is attached to any landscape elements using a set of mounting rig. It can be fixed to a tree. vehicle. 23.Features Operates on one battery for up to 6 months. 200 m min. rocks or natural elevations within the secure area.414−2. The camera uses a 2. 6 months 80 000 h 12 V 433.4 GHz one-way channel. the camera processor activates the camera and video data channel. It’s possible to set which radio sensors will activate the camera and for how long it should run when activated.2−434. Most of the time video camera is in standby mode and is activated by operator or by signals from sensors received via radio-modem. 17. All-weather casing (allows to use it in any climate conditions in temperatures ranging from -40 to +50 °C and humidity of up to 95%).0° min. animal Observation angle: horizontally vertically Continuous operation time Continuous operation time in standby mode Time between failures Power supply by external battery with voltage Radio channel frequency Radio channel type Video channel frequency Communication range between RS-TP and video receiver depending on the type of antenna IP rating Operating temperature range Value min. The rechargeable battery can be placed nearby or buried underground (thus increasing operating life in low temperatures). when deployment of the operator’s console is impossible.3.Weight Dimensions (length×width×height) (excluding projecting parts): thermal imaging camera thermal imaging transmitter max.6 kg 220×89×73 mm 140×90×55 mm 5. when performing special tasks or monitoring surveillance targets (paths.2 h from 0. PTV Portable TV Receiver The PTV Portable TV Receiver is a component part of the video control sub-system and is designated to receive the video signal via a radio channel from RS-TV TV cameras and generating the image on a monitor.7 V up to 2. 2.1 to 5 km 80 000 h IP53 from -10 °C to +50 °C max.). Parameters Parameter Rated voltage of built-in rechargeable battery Continuous operation time (under normal climatic conditions) Video signal receiving range in conditions of direct visibility depending on the type of antenna Time between failures IP rating Operating temperature range Weight Dimensions (length×width×height) (excluding antenna) Value 3. pipeline tapping. For example.2. etc.9 kg 220×110×50 mm 15 . How it works The PTV Portable TV Receiver is adapted to operation under field conditions and serves for checking and adjusting the video control sub-system during its deployment on the terrain. The PTV Portable TV Receiver is designed to receive video in the process of its deployment in the terrain. 0. Features  Designed to display installed sensors on an electronic area map and control their operational parameters.  Monitoring operational integrity and battery condition of installed sensors every minute.  Logging alarm messages in text and graphic form and recording video clips from video surveillance sub-system.414−2.  Exchange of text messages between KOPR Handheld Control Receivers within radio transmission range. 5.5.6 MHz two-way digital radio channel 2.468 GHz IP65 from -40 °C to +50 °C max.3.  Representing alarms by sound and light signals. 12 kg 560×390×240 mm 650×465×468 mm 16 .3. MPO Portable Operator’s Console The MPO Portable Operator’s Console is a laptop computer integrated into a rugged carrying case with network communication devices and uninterruptable power supply. and enables the operator to control the network. Controlling and Receiving Devices Used for receiving and displaying alarm and service information from the system’s devices. The PORT Operator’s Console is a portable (notebook) or desktop computer with the Windows operating system and specialized Mapping System software. 24 hours 433. Parameters Parameter Unattended continuous operation time from fully charged built-in battery Radio channel frequency Radio channel type Video channel frequency IP rating (in the lid is closed and locked) Operating temperature range Weight Dimensions (length×width×height): in travelling position in operating position Value min. The “GIS SENTRY RB” Command and Control software displays the location and operational condition of sensors and other elements on an electronic map or area plan. It may be the computer supplied as part of the system or the one already available to you.1.2−434. The "GIS SENTRY RB" software controls operation of sensors. Ethernet or RS232 interfaces can be used for transceiver connection. “GIS SENTRY RB” interface displaying RS-U Multi-Sensors deployed over a pipeline. A command and control software is designed to process messages sent by network technical devices. The software is able to operate with unlimited number of networks. control receivers and other devices operating in data-exchange network via synchronous protocol. which is why it is possible to provide monitoring over several areas using only one MPO Portable Operator's Console. Features  Designed to display installed sensors on an electronic area map and control their operational parameters. changes in color and configuration of displayed icons. 17 . text messages. display technical devices status. Coordinates of sensors are referenced to a graphical layout or map of monitored area to provide visualization of alarm information and perform analysis of alarm situation.5.  Monitoring operational integrity and battery condition of installed sensors.3. The "GIS SENTRY RB” software provides operation of a PC (a part of the Operator’s Console delivery set) within the data exchange network via radio channel by connecting a transceiver (a RS-U Multi-Sensor or a TV-BPO TV Control Station) to a PC. A MOXA server can be used to establish an interface between Ethernet and RS232. Picture 3. video image) of alarm situations within the monitored area. control technical devices operating modes and notify the Operator (by sound signals. “GIS SENTRY RB” Command and Control Software "GIS SENTRY RB" Command and Control Software (hereinafter "GIS SENTRY RB") is a Command and Control Software for Wireless Intrusion Detection System.2. locate sensors and monitor their status. and is capable of sending and receiving short text messages within the network. Allows measuring seismic noise level and changing RS-U sensitivity level when it works as a seismic detection device. KOPR Control Receiver is used for setting smaller temporary perimeters (up to 10 devices).  Allows locating devices on site (using inbuilt GPS receiver and a digital compass). display and store alarm signals of detection devices. as well as to monitor and control the radio network. Representing alarms by sound and light signals. Allows controlling radio sensors’ mode.2−434.  Logging alarm messages in text and graphic form and recording video clips from video surveillance system. 0. KOPR can work as network node or as network controller. Allows monitoring every network element.65 kg Dimensions (length×width×height) 210×95×45 mm (excluding antenna) 18 .7 V Continuous operation time (without enabling GPS-receiver min. 72 h and electronic compass) Radio channel frequency 433.6 MHz Radio channel type two-way digital radio channel Communication range in conditions of direct visibility min.     Parameters Parameter Value Rated voltage of built-in rechargeable battery 3.3.  Exchange of text messages between KOPR Handheld Control Receivers within radio transmission range. Features Receives alarm signals from one radio network (including up to 40 devices). It is equipped with a digital compass and a GPS-receiver. 5. KOPR Control Receiver is required for installation and start-up of the system’s devices and it can serve as a receiving and controlling device in field conditions. KOPR Control Receiver It is used to receive.3.  Keeps in its memory GPS coordinates of devices’ locations. 500 m depending on the type of antenna Time between failures 80 000 h IP rating IP53 Operating temperature range from -10 °C to +50 °C Weight: max. 1. Other Equipment 5. Parameters Parameter Power supply by external battery with voltage Radio channel frequency Radio channel type Video channel frequency IP rating: BTS Network TV Unit BVA External Antenna Unit Operating temperature range: BTS Network TV Unit BVA External Antenna Unit Weight: BTS Network TV Unit BVA External Antenna Unit Dimensions (length×width×height): BTS Network TV Unit BVA External Antenna Unit BVA External Antenna Unit BTS Network TV Unit Value 12 V 433. 0.1.6 MHz two-way digital radio channel 2.2.2−434.4. TV-R TV Repeater operating modes  standby mode – TV-R is on-line and is ready for video signal receipt and retransmission. TV-BPO Control Station consists of two units connected by means of MBK Interconnecting Cable.  active mode – TV-R receives and retransmits video signal via high-frequency radio channel at receiving triggering command either from Operator's request or from sensors.15 kg max.414−2.5.4. BVA External Antenna Unit is a sealed device installed next to 2.468 GHz IP54 IP67 from 0 °C to +40 °C from -40 °C to +50 °C max.4.4) by means of AMU Antenna Mounting Mast. convert it into a digital format and transmit it to a PC. 19 .4 GHz Base Circular Antenna (ABK2. BTS Network TV Unit is a desktop device installed next to a PC.55 kg 250×215×80 mm 130×90×55 mm 5. TV-BPO TV Control Station TV-BPO Control Station is designed to receive video signal via radio channel. TV-R TV Repeater TV-R TV Repeater is a small-sized device powered by external battery designed to retransmit video signal via radio channel. 4 kg Dimensions (length×width×height) 245×160×70 mm (excluding projecting parts) 5.3. 1 year 1013 External Battery Radio channel frequency 433. MR Trunk Repeater MR Trunk Repeater is designed to provide connection with low-level network devices and to repeat messages to high-level network devices.2 to 434. 2.5 kg Dimensions (length×width×height) (excluding projecting parts) 140×60×40 mm 20 .468 GHz IP rating IP67 Operating temperature range from -40 °C to +50 °C Weight max.Parameters Parameter Value Power supply by external battery with voltage 12 V Communication range of radio channel for receipt and from 0.4. MR Trunk Repeater functions are as follows:  automatic organization of high-level network. 6 months Transmission frequency from 2.6 MHz Radio channel type two-way digital radio channel Range of communication between two min.6 MHz Radio channel type two-way digital radio channel Continuous operation time in active mode min.2−434. 10 h Continuous operation time in standby mode min.414 to 2.  transmission of Operator control commands to low-level networks. 0.7 to 3 km retransmission of video signal in conditions of direct visibility irrespective of antenna type Radio channel frequency from 433.  receipt and transmission of alarm data from low-level network devices to Operator's workstation. 5 km MR Trunk Repeaters in conditions of direct visibility when using 433 MHz Cable Antenna Time between failures 80 000 h IP rating IP68 Operating temperature range from -40 °C to +50 °C Weight max. Parameters Parameter Value Power supply by external battery with voltage 10 V Duration of unattended operation when powered by VIPmin. 3 kg 175×90×150 mm 22 .015 A Operating temperature range Weight Dimensions (length×width×height) (excluding projecting parts) Cable length Value LSH 20 from 10.12 Ah from -40 °C to +50 °C max.4.8 kg 126×76×48 mm 650 mm 5.8 to 11. 0.3 A Capacity at discharge current of 0.5 to 13.6 V min. Parameters Parameter Internal battery type Output voltage Voltage at load current of 0. 200 charge-discharge cycles from -40 °C to +50 °C 3. 5 A·h min. 10 V min.4.7.5. VIP-1272 External Battery VIP-1272 External Battery is a rechargeable lead-acid battery used for supplying DC power to network devices.6. 12 V min.8 V min. VIP-1013 External Battery VIP-1013 External Battery is a lithium battery used for supplying DC power to network devices. Parameters Parameter Output voltage Voltage at load current of 1 A Capacity at discharge current of 1 A Average lifetime Operating temperature range Weight Dimensions (length×width×height) (excluding projecting parts) Value from 12. 4.6. 12 V min.3 kg 175×90×150 mm 22 .5. 5 A·h min. 0. 10 V min. 200 charge-discharge cycles from -40 °C to +50 °C 3. Parameters Parameter Internal battery type Output voltage Voltage at load current of 0.8 V min. VIP-1272 External Battery VIP-1272 External Battery is a rechargeable lead-acid battery used for supplying DC power to network devices.6 V min.8 kg 126×76×48 mm 650 mm 5.12 Ah from -40 °C to +50 °C max. Parameters Parameter Output voltage Voltage at load current of 1 A Capacity at discharge current of 1 A Average lifetime Operating temperature range Weight Dimensions (length×width×height) (excluding projecting parts) Value from 12.3 A Capacity at discharge current of 0. VIP-1013 External Battery VIP-1013 External Battery is a lithium battery used for supplying DC power to network devices.015 A Operating temperature range Weight Dimensions (length×width×height) (excluding projecting parts) Cable length Value LSH 20 from 10.8 to 11.4.5 to 13.7. 0.5. range of communication can decrease if antenna is covered with snow of more than 10 cm. ASh-433 433 MHz Whip Antenna ASh-433 433 MHz Whip Antenna is designed to provide wireless data exchange between sensors. camouflageable antenna with a cruciform-shaped antenna counterpoise. It is a standard antenna to be used with RS-U sensor. SWR = 1.25 kg 500 mm 350 mm Radiation pattern when antenna is installed above in the vertical plane when antenna is ground.5 km from minus 40 °C to plus 50 °C IP68 max.3.4.0) Frequency range Horizontal radiation pattern Antenna gain Connector Range of communication between two sensors when using ASh-433* Operating temperature range IP rating Weight Dimensions (excluding cable) Height Diagonal of the basement Value 15 MHz 410 – 450 MHz circular pattern 4 dBi TL4521-58 (TNC 7406A) up to 1. 23 . maximum gain of 5 dBi installed on: ground surface metal surface *communication range is specified for conditions of direct visibility and normal magnetic environment.8. Parameters Parameter Bandwidth (SWR=2. The ASh-433 is a demountable. The antenna can be used without the basement (the basement is detachable).0) *communication range is specified for conditions of direct visibility and normal magnetic environment .9. Parameters Parameter Bandwidth (SWR=1. The AShV-433 is a demountable antenna with an inductance coil which can be easily camouflaged. 24 . where a long communication distance is required.3 kg 800 mm 350 mm The AShV-433 can be installed on any kind of surface or above ground. Radiation pattern in the vertical plane when installing the when installing antenna on metal antenna on ground surface (SWR = 1. 0.5) Frequency range Horizontal radiation pattern Antenna gain Connector Range of communication between two sensors when using AShV-433* Operating temperature range IP rating Weight Dimensions (excluding cable) Height Diagonal of the basement Value 25 MHz 410 – 450 MHz circular pattern 4 dBi TL4521-58 (TNC 7406A) up to 5 km from minus 40 °C to plus 50 °C IP68 max. AShV-433 433 MHz Long Whip Antenna AShV-433 433 MHz Long Whip Antenna is designed to provide wireless data exchange between sensors deployed in area without tall trees.5.4.5) surface (SWR = 1. The KBV-433 can be easily camouflaged.5 to 3 m.15 kg 700 mm 35 mm Radiation pattern In the vertical plane when lifting the antenna above the ground *communication range is specified for conditions of direct visibility and normal magnetic environment.10. The KBV-433 is installed on a tree or a support. KBV-433 433 MHz Cable Antenna KBV-433 433 MHz Cable Antenna is designed to provide wireless data exchange between sensors and used along with the sensors which are operated in repeaters mode. 25 . 0.5.5) Frequency range Horizontal radiation pattern Antenna gain Connector Range of communication between two sensors when using KBV-433* Operating temperature range IP rating Weight Dimensions (excluding cable) Height Width Value 25 MHz 410 – 450 MHz circular pattern 5 dBi TL4521-58 (TNC 7406A) up to 10 km from minus 40 °C to plus 50 °C IP68 max. Optimum altitude of the antenna installation is from 2.4. Parameters Parameter Bandwidth (SWR=1. 1.4.1 kg 755 mm 80 mm or 125 mm Dependence of SWR on frequency in the vertical plane when antenna is SWR < 1. AMSh-433 433 MHz Magnetic Base Whip Antenna The AMSh-433 433 MHz Magnetic Base Whip Antenna is designed to provide wireless data exchange between sensors. The AMSh-433 is installed on a metallic surface (e.5 within frequency interval from 427 to 440 MHz installed on metal surface *communication range is specified for conditions of direct visibility and normal magnetic environment.0) Frequency range Horizontal radiation pattern Antenna gain Connector Range of communication between two sensors when AMSh-433 and ASh-433 are used* Operating temperature range IP rating Weight Dimensions (excluding cable) Height Diagonal of the basement (2 variants of execution) Radiation pattern Value 20 MHz 410 – 450 MHz circular pattern 5 dBi TL4521-58 (TNC 7406A) up to 4 km from minus 40 °C to plus 50 °C IP68 max.5. car roof). 26 .11. Parameters Parameter Bandwidth (SWR=2.g. The AMSh-433 is a twosection whip (1/4 + 5/8 wave) on a magnetic basement. These minor components may be supplied with the system depending on the requirements. provided these modifications and additions improve and enhance the system’s performance. packaging.4. spare parts. BSL is designed to receive data from sensors and to transmit alarm data to remote Control Station via cable communication lines.5.16 Radio channel frequency 433. 0. etc. BSL Liner Interface Box BSL Linear Interface Box consists of three units: BUR Relay Control Unit and BKR Switching Relay Unit (from 1 up to 5 units). other antennas.2−434. BSL versions: 8-way BSL-08: BUR+BKR (1 pc) 16-way BSL-16: BUR+BKR (2 pcs) 24-way BSL-24: BUR+BKR (3 pcs) 32-way BSL-32: BUR+BKR (4 pcs) 40-way BSL-40: BUR+BKR (5 pcs) Parameters Parameter Value Communication range in conditions of direct visibility from 0.55 kg BKR Switching Relay Unit max. 27 . The manufacturer reserves the right to modify any of the components of the system and add new components. 0.6 MHz Radio channel type two-way digital radio channel IP rating IP53 Operating temperature range from -40 °C to +50 °C Weight: BUR Relay Control Unit max.5 to 5 km depending on the type of antenna Number of sensors assigned to one relay unit max.12.5 kg Dimensions (length×width×height): BUR Relay Control Unit 126×73×68 mm BKR Switching Relay Unit 131×84×52 mm IMPORTANT! All the above components constitute the main part of the Radiobarrier System. supplementary software. such as connecting cables. The system may also include other minor components. Simplicity of installation and operation allows avoiding design stage in most projects. It's truly mobile and autonomous architecture makes it the best surveillance solution for use in mountainous areas and areas with no access to power. or communication infrastructure. Conclusion SENTRY RB System is a unique and cost efficient solution for surveillance of extended perimeters and remote areas. saving money and time. 28 .6.
Copyright © 2024 DOKUMEN.SITE Inc.