SAMManagement of remote cellular base stations becoming a problem? SAM is designed to help optimize utilization of expensive infrastructure such as utility power, generators, security including video surveillance and environmental cooling through reducing unnecessary operation by intelligently saving operational appex costs. The SAM unit supplies an end-to-end ip communications channel with the BTS site, through the E1 circuit connected to the BTS site, thus providing a direct LAN/WAN connection to subscriber equipment. Optionally SAM could supply end-to-end communications with the BTS site, through the use of a GSM modem, using a GPRS connection to a SMSC server and alarm messaging following a SMPP protocol. Tel: +27 (0) 11 206 8420 Fax: +27 (0) 11 206 8451 [email protected] www. The Access Control unit can be accessed via internal RS485 port of the E1 controller unit for management purposes.NETWORK MANAGEMENT . A combination of these ports and the interaction of BSC Aircon Control Switch Generator 1 Generator 2 each. The ECS is totally modular and would include all or any one of the modular units.co. single or more timeslots within the e1 circuit feeding the BTS. determines the operation and functionality of the unit. and log access events. which are all user configurable . It uses a 32bit wiegand interface reader to identify.za Electrostatic Filter ALARM POWER timeslots. SAM unit and Access Control unit. Communication to and from DVR Access Control Unit Power Utility Controller Unit Battery Management Controller Unit the BTS is done through a dedicated. within the designated DC Extractor Fan E1 Controller Unit OK RS485 Inala Technologies (Pty) Ltd. E1 Controller is installed intrusively in the E1 circuit that links the BTS with the BSC. Used with a choice of a Fail Secure Claw Lock or Fail Safe Magnetic Claw lock will be energized on a valid access. The Access Control unit is used to manage access to a site. The ECS is consists of an E1 Controller Fail Secure Claw-lock unit. depending on the application it Current Available Credit Low Credit Indication Credit Token Upload Laptop Configuration Access Load Current/Current Probe Battery Voltage Input 1 Battery Voltage Input 2 Entry Reader Exit Button will be used for. The E1 Controller performs a drop and insert function. The E1 communications control unit Generator Management Controller Unit DIAGNOSTIC PORT SAM Main Controller Humity & Room Temp Probe GSM Modem consists of a PCB with multiple network communications options for AC 1 AC 2 E1 Timeslot Optional Reporting SMS Messaging the purpose of remote BTS site asset management from a central management platform. The SAM has E1 Timeslot SMSC Server N/C / N/O Inputs Rectifier N/C Inputs Grooming Mux SMPP Mains/Phase Monitor Fuel Level Tank Lid MSC BTS Radio LAN TCP-IP LAN/WAN N/C NAV Monitor Multiple Auxiliary Alarm Inputs LAN TCP-IP Movement Intrusion Smoke SAM Manager SNMP Alarm Traps Client Terminal Panic NMC |02| N L3 L2 L1 OUT IN L3 OK L2 OK L1 OK 24 General Purpose Alarm inputs and 24 Optocoupler P-N Transistor outputs (for BTS alarm interface) and 7 relays. The SAM unit is used for Environmental monitoring and control and can be accessed via internal RS485 port of the E1 controller unit for management purposes.E1 COMMUNICATIONS ECS is a communication device with the purpose of managing and monitoring the remote cellular BTS sites.co. . co. A combination AC 1 AC 2 Optional Reporting SMS Messaging of these ports and the interaction of each. and log access events. The ITMS consists of a TCP/IP Fail Secure Claw-lock Controller unit. determines the operation and functionality of the unit. TCP/IP interface connection required is a 10 BaseT Full Duplex 64Kbps/64Kbps.NETWORK MANAGEMENT .co.za Electrostatic Filter ALARM POWER DC Extractor Fan The TCP/IP communications control unit consists of a PCB with multiple RS232 communications options for the purpose of remote BTS site asset Generator Management Controller Unit DIAGNOSTIC PORT SAM Main Controller Humity & Room Temp Probe GSM Modem management from a central management platform.ITMS COMMUNICATIONS ITMS is a communication device with the purpose of managing and monitoring the remote cellular BTS sites. The ITMS is totally modular and would include all or any one of the modular units. Optional Backup TCP-IP Controller Unit GSM Modem OK RS485 Inala Technologies (Pty) Ltd. Communication to and from the BTS is DVR Access Control Unit Power Utility Controller Unit Battery Management Controller Unit done through a TCP/IP connection. TCP/IP Controller is installed and connected to a TCP/IP port. SAM unit and Access Control unit. . Rectifier N/C Inputs SMPP Mains/Phase Monitor LAN/WAN N/C Fuel Level Tank Lid N L3 L2 L1 L3 OK L2 OK L1 OK The Access Control unit is used to Movement manage access to a site. Tel: +27 (0) 11 206 8420 Fax: +27 (0) 11 206 8451 systems@inala. Aircon Control Switch Generator 1 Generator 2 The SAM unit is used for Environmental monitoring and control and can be accessed via internal BTS Radio SMSC Server N/C / N/O Inputs RS485 port of the E1 controller unit for management purposes. The Access Control unit can be accessed via internal RS485 port of the E1 controller unit for management purposes.za www. Used with a choice of a Fail Secure Claw NAV Monitor Intrusion Multiple Auxiliary Alarm Inputs LAN TCP-IP Smoke SAM Manager SNMP Alarm Traps Client Terminal Panic NMC |03| OUT IN Lock or Fail Safe Magnetic Claw lock will be energized on a valid access. It uses a 32bit wiegand interface reader to identify. depending on Current Available Credit Low Credit Indication Credit Token Upload Laptop Configuration Access Load Current/Current Probe Battery Voltage Input 1 Battery Voltage Input 2 Entry Reader Exit Button the application it will be used for.inala. The SAM has 24 General Purpose Alarm inputs and 24 Optocoupler P-N Transistor outputs (for BTS alarm interface) and 7 relays. if required. AC 1 AC 2 Optional Reporting SMS Messaging SMS alarm messages are forwarded to the management platform. ! TCP/IP Controller is installed and connected to a TCP/IP port.Communication to and from the BTS is done through a Generator Management Controller Unit DIAGNOSTIC PORT SAM Main Controller Humity & Room Temp Probe GSM Modem dedicated data call or SMS messages. Tel: +27 (0) 11 206 8420 Fax: +27 (0) 11 206 8451 [email protected] NETWORK MANAGEMENT SMS/GPRS COMMUNICATIONS Communication Reporting Options SAM is installed using one of the following communication mediums: ! E1 Controller is installed intrusively Fail Secure Claw-lock in the E1 circuit that links the BTS with the BSC. ! Fuel levels and accurate consumption highlights any fuel anomalies with excessive usage – theft. Aircon Control Switch Generator 1 Generator 2 Alarms could be catogorised in different classes for individual notification. but also multiple technicians.za POWER with the SMSC and management platform using a SMPP message protocol. Communication to and from the BTS is done through a dedicated. single or more timeslots Current Available Credit Low Credit Indication Credit Token Upload Laptop Configuration Access Load Current/Current Probe Battery Voltage Input 1 Battery Voltage Input 2 Entry Reader Exit Button within the e1 circuit feeding the BTS.za www. OK RS485 Electrostatic Filter ALARM ! A GSM modem that links the BTS DC Extractor Fan Inala Technologies (Pty) Ltd.co. Access Control Unit Power Utility Controller Unit Battery Management Controller Unit Communication to and from the BTS is done through a TCP/IP connection. BTS Radio SMSC Server Rectifier N/C / N/O Inputs N/C Inputs Mains/Phase Monitor Tank Lid Features ! Automatically switching to hybrid mode instead of generators N/C Fuel Level SMPP LAN/WAN NAV Monitor Movement Multiple Auxiliary Alarm Inputs LAN TCP-IP Intrusion Smoke SAM Manager SNMP Alarm Traps Client Terminal Panic NMC N L3 L2 L1 OUT IN L3 OK L2 OK L1 OK ! Free Cooling – Run DC Fan instead of Aircons ! Access Control – Staff and contractors ! External Perimeter alarming – means of theft notification.co. ! Generator Monitoring & Control |04| . 485 |05| . such as rectifiers. though secure user groups. management becomes more cost effective # Due to reduction in unnecessary site visits and call-outs it would result in a significant cost saving # Various optional expandable interfaces are available. # Various RS232 serial interface ports for secondary device management. Access control with entry and exit log function. # Real time management through an on-line E1 timeslot connection. # Management platform multi user password protection prevents unauthorized log-on. LAN and RS. with minimum disruption to transmission # # # # # # Continuous updated view of the entire monitored network at all times One or more timeslots. for the purpose of alarm and event management. Benefits # Preventative fault management and immediate reaction to problems.Alarm Biometric Reader Video Camera Network Management Centre E1 Timeslot or LAN / WAN Card Reader Main features: # Near real time management through SMS alarm and event management. including intruder and movement sensor bypass functionality. Generator monitoring and control.232. Perimeter fence monitoring. # Remote or on-site upgrading of SAM operating firmware (re-programmable flash). thus reducing costs # By using a timeslot or multiple timeslots. generators and mains utility meters. by means of the e1 communications controller unit. a secondary GSM path could optionally be used Unit failure results in the E1 circuit being bypassed with no loss to voice traffic The optional LAN port provides LAN/WAN network access from the BTS No need for optional communications infrastructure due to the use of the existing E1 circuits. Remote configuration through GSM data call connection. # Important operating parameters (configuration data) / variables can be modified remotely. # # # # Video surveillance in conjunction with the E1 communications controller unit. such as RS. sub-slots or SA-bits are used for management of the chain of sites Should the primary E1 communications medium fail. SAM COMPARISIONS . South Africa Tel: +27 (0)11 206 8300 • Fax: +27 (0)11 206 8333 • info@inala. 4770 223 784 JOHANNESBURG Inala House. 2004/007308/07 VAT No.The next step Contact us today to see how SAM can contribute to your operational efficiency and sustained wealth creation. 1A Meson Street.co. No. INALA SYSTEMS DIVISION OF INALA TECHNOLOGIES (PTY) LTD Reg.za DURBAN Inala Durban.za STELLENBOSCH Inala Cape.co.Technopark. Durban. Stellenbosch. Randjespark.co. South Africa Tel: +27 (0)21 880 2206 • Fax: +27 (0)21 880 2675 • capeinfo@inala. 557 15th Road.za |06| . Clarence House. 1st Floor. South Africa Tel: +27 (0)83 675 7448 • Fax: 086 677 0273 • durbaninfo@inala. Midrand.za http://www.inala. 9-11 Linden Road. Suite 1.co.