Sabs

March 29, 2018 | Author: Robert Nicodemus Pelupessy | Category: Electromagnetic Compatibility, Bearing (Mechanical), Pipe (Fluid Conveyance), Nondestructive Testing, Welding
Share
Report this link


Comments



Description

Standards available in electronic format (PDF) October 2009 SANS Number SANS 1-1:2003 Edition Title 1 Standards for standards Part 1: The development of national standards and other normative documents Standards for standards Part 2: Requirements for the recognition of Standard Development Organizations (SDOs) in South Africa Lead-acid starter batteries SANS 1-2:2007 1 SANS 2:2009 (SABS 2) SANS 4:2008 (SABS 4) SANS 11:2007 (SABS 11) SANS 13:2008 (SABS 13) SANS 14:1994/ISO 49:1994, IDT, Ed. 2 (SABS ISO 49) SANS 15:2008 (SABS 15) SANS 16:2007/ISO/IEC 10116:2006, IDT, Ed. 3 7 3.03 Locks, latches, and associated furniture for doors (Domestic Type) Unplasticized poly(vinyl chloride) (PVC-U) components for external rainwater systems Wax polish, solvent-based, for floors and furniture 1.02 2.03 1 Malleable cast iron fittings threaded to ISO 7-1 2.03 Wax emulsion polish for floors and furniture 2 Information technology - Security techniques Modes of operation for an n-bit block cipher Glass and plastics in furniture SANS 17:2005 1 SANS 18-1:2003/ISO/IEC 10118-1:2000, IDT, Ed. 2 1 Information technology - Security techniques - Hashfunctions Part 1: General Information technology - Security techniques - Hashfunctions Part 2: Hash-functions using an n-bit block cipher Information technology - Security techniques - Hashfunctions Part 3: Dedicated hash-functions Information technology - Security techniques - Hashfunctions Part 4: Hash-functions using modular arithmetic The inspection, testing and examination of mobile cranes Primary zinc SANS 18-2:2003/ISO/IEC 10118-2:2000, IDT, Ed. 2 1 SANS 18-3:2007/ISO/IEC 10118-3:2004, IDT, Ed. 3 2 SANS 18-4:2003/ISO/IEC 10118-4:1998, IDT, Ed. 1 1 SANS 19:2007 1.01 SANS 20:2008 (SABS 20) SANS 21-1:2009/EN 115-1:2008, IDT, Ed. 1 2.01 1 Safety of escalators and moving walks Part 1: Construction and installation Glazed ceramic wall tiles and fittings SANS 22:2005 (SABS 22) SANS 23-4:2003/EN 10223-4:1998, IDT, Ed. 1 2.03 1 Steel wire and wire products for fences Part 4: Steel wire welded mesh fencing Soft solders SANS 24:2008 (SABS 24) 4.01 Page 1 Standards available in electronic format (PDF) October 2009 SANS Number SANS 25:2008 (SABS 25) SANS 26 AND SANS 25:1977 (SABS 26 AND SANS 25) SANS 26:2008 (SABS 26) SANS 27:2008/EN 10202:2001, IDT, Ed. 2 (SABS EN 10202) SANS 28:1986 (SABS 28) SANS 29:2004 (SABS 29) SANS 31:2007/EN 10204:2004, IDT, Ed. 2 (SABS EN 10204) SANS 32:1997/EN 10240:1997, IDT, Ed. 1 (SABS EN 10240) SANS 33:2007 (SABS 1833) SANS 38:2008 (SABS 38) SANS 39:2006/ISO 407:2004, IDT, Ed. 3 (SABS ISO 407) SANS 40:2009 (SABS 40) SANS 42:1965/ISO/R 442:1965, IDT, Ed. 1 (SABS ISO/R 442) SANS 43:2008/ISO 540:2008, IDT, Ed. 4 (SABS ISO 540) SANS 44:2009/ISO 544:2003, IDT, Ed. 3 (SABS ISO 544) SANS 47:2007 (SABS 47) SANS 49:2007 (SABS 49) SANS 50:1998/ISO 562:1998, IDT, Ed. 2 (SABS ISO 562) SANS 51:2008/ISO 580:2005, IDT, Ed. 3 (SABS ISO 580) SANS 52:1981/ISO 622:1981, IDT, Ed. 1 (SABS ISO 622) Edition Title 2.01 Zinc alloy ingots for die-castings 2 Zinc alloy ingots for die-castings and zinc alloy diecastings (SANS 25 and SANS 26 bound together) Zinc alloy die-castings 2.01 2 Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel Metal ties for cavity walls 4 3.01 Articles made of precious metals 2 Metallic products - Types of inspection documents 1 Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants Equipment for use in industrial rope access work 1.02 3.03 Metallic naphthenates for timber preservation 2 Small medical gas cylinders - Pin-index yoke-type valve connections Manually operated medium-vacuum sterilizers (autoclaves) Verification of pendulum impact testing machines for testing steels Hard coal and coke - Determination of ash fusibility 2.03 1 2 2 Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings Coal-tar type disinfectant liquids (black and white) 3.01 3.01 Edible gelatin 1 Hard coal and coke - Determination of volatile matter Plastics piping and ducting systems - Injectionmoulded thermoplastics fittings - Methods for visually assessing the effects of heating Solid mineral fuels - Determination of phosphorus content - Reduced molybdophosphate photometric method 2 1 Page 2 Standards available in electronic format (PDF) October 2009 SANS Number SANS 53:2005/ISO 636:2004, IDT, Ed. 3 (SABS ISO 636) SANS 54:2009/ISO 188:2007, IDT, Ed. 4 Edition Title 2 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and finegrain steels - Classification Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests Coiled wire for automatic baling machines 2 SANS 58:2008 (SABS 58) SANS 61-1:2009/ISO 10245-1:2008, IDT, Ed. 2 2.01 2 Cranes - Limiting and indicating devices Part 1: General Steel pipes Part 1: Pipes suitable for threading and of nominal size not exceeding 150 mm Steel pipes Part 2: Screwed pieces and pipe fittings of nominal size not exceeding 150 mm Blankets SANS 62-1:2003 (SABS 62-1) SANS 62-2:2009 (SABS 62-2) SANS 63:2009 (SABS 63) SANS 68:2003/ISO 10282:2002, IDT, Ed. 2 3.01 3.01 5.04 1 Single-use sterile rubber surgical gloves Specification Framework for setting and implementing national ambient air quality standards Conditioning of textiles and standard temperate atmosphere for determining their physical and mechanical properties Inspection and testing of vehicle hoists SANS 69:2004 1 SANS 70:2004 (SABS SM 70) SANS 71:2004 3 1 SANS 77:2008 (SABS 77) SANS 79:2004 (SABS SM 79) SANS 80:2004 (SABS SM 80) SANS 81:2004 (SABS SM 81) SANS 82:2004 (SABS SM 82) SANS 83:2007 (SABS SM 83) SANS 84:2005 (SABS SM 84) SANS 85:2007 (SABS SM 85) SANS 92:2008 (SABS 92) 3.03 Wooden handles for brooms, hay-forks, and rakes (including general requirements for other wooden handles for tools) Textiles - Mass per unit area of conditioned fabrics 4.01 4 Mass (oven-dry plus conventional allowance) per unit area of textile fabrics, free from non-fibrous material Width of a textile fabric sample 3 3 Width of a textile fabric in a piece or roll 3 Length of a textile fabric sample 4 Length of fabric in a piece or roll 3 Thickness of wool fabrics 5.01 Bituminous roofing felt Page 3 Standards available in electronic format (PDF) October 2009 SANS Number SANS 94-1:2003/EN 1492-1:2000, IDT, Ed. 1 Edition Title 1 Textile slings - Safety Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use Textile slings - Safety Part 2: Roundslings, made of man-made fibres, for general purpose use Batch sampling and acceptance criteria for explosion-protected apparatus (EPA) Electric cables - Impregnated paper-insulated metalsheathed cables for rated voltages 3,3/3,3 kV to 19/33 kV (excluding pressure assisted cables) Ingredient labelling of cosmetic products SANS 94-2:2003/EN 1492-2:2000, IDT, Ed. 1 1 SANS 96:2006 1 SANS 97:2001 (SABS 97) SANS 98:2006 6.01 1 SANS 99:2008 (SABS 99) SANS 101:2009 3 White chalks 1.01 White metal designated WM 6 SANS 102:2009 1.01 White metal designated WM 15 SANS 103:2009 1.01 White metal designated WM 30 SANS 104:2009 1.01 White metal designated WM 40 SANS 105-A01:1994/ISO 105-A01:1994, IDT, Ed. 5 (SABS ISO 105-A01) SANS 105-A02:1993/ISO 105-A02:1993, IDT, Ed. 4 (SABS ISO 105-A02) SANS 105-A03:1993/ISO 105-A03:1993, IDT, Ed. 4 (SABS ISO 105-A03) SANS 105-A08:2003/ISO 105-A08:2001, IDT, Ed. 1 1 Textiles - Tests for colour fastness Part A01: General principles of testing Textiles - Tests for colour fastness Part A02: Grey scale for assessing change in colour Textiles - Tests for colour fastness Part A03: Grey scale for assessing staining Textiles - Tests for colour fastness Part A08: Vocabulary used in colour measurement Textiles - Tests for colour fastness Part B01: Colour fastness to light: Daylight Textiles - Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test Textiles - Tests for colour fastness Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test Textiles - Tests for colour fastness Part B05: Detection and assessment of photochromism Textiles - Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda Textiles - Tests for colour fastness Part D01: Colour fastness to dry cleaning 1 1 1 SANS 105-B01:1994/ISO 105-B01:1994, IDT, Ed. 5 (SABS ISO 105-B01) SANS 105-B02:1994/ISO 105-B02:1994, IDT, Ed. 4 (SABS ISO 105-B02) SANS 105-B04:1994/ISO 105-B04:1994, IDT, Ed. 4 (SABS ISO 105-B04) SANS 105-B05:1993/ISO 105-B05:1993, IDT, Ed. 4 (SABS ISO 105-B05) SANS 105-C10:2007/ISO 105-C10:2006, IDT, Ed. 1 1 1 1 1 1 SANS 105-D01:1993/ISO 105-D01:1993, IDT, Ed. 4 (SABS ISO 105-D01) 1 Page 4 Standards available in electronic format (PDF) October 2009 SANS Number SANS 105-D02:1993/ISO 105-D02:1993, IDT, Ed. 4 (SABS ISO 105-D02) SANS 105-E01:1994/ISO 105-E01:1994, IDT, Ed. 4 (SABS ISO 105-E01) SANS 105-E02:1994/ISO 105-E02:1994, IDT, Ed. 4 (SABS ISO 105-E02) SANS 105-E03:2004/ISO 105-E03:1994, IDT, Ed. 3 Edition Title 1 Textiles - Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents Textiles - Tests for colour fastness Part E01: Colour fastness to water Textiles - Tests for colour fastness Part E02: Colour fastness to sea water Textiles - Tests for colour fastness Part E03: Colour fastness to chlorinated water (swimming-pool water) Textiles - Tests for colour fastness Part E04: Colour fastness to perspiration Textiles - Tests for colour fastness Part E05: Colour fastness to spotting: Acid Textiles - Tests for colour fastness Part E06: Colour fastness to spotting: Alkali Textiles - Tests for colour fastness Part E07: Colour fastness to spotting: Water Textiles - Tests for colour fastness Part F: Standard adjacent fabrics Textiles - Tests for colour fastness Part F01: Specification for wool adjacent fabric Textiles - Tests for colour fastness Part F03: Specification for polyamide adjacent fabric Textiles - Tests for colour fastness Part F04: Specification for polyester adjacent fabric Textiles - Tests for colour fastness Part F05: Specification for acrylic adjacent fabric Textiles - Tests for colour fastness Part F06: Specification for silk adjacent fabric Textiles - Tests for colour fastness Part F07: Specification for secondary acetate adjacent fabric Textiles - Tests for colour fastness Part F10: Specification for adjacent fabric: Multifibre Textiles - Tests for colour fastness Part J01: General principles for measurement of surface colour Textiles - Tests for colour fastness Part J03: Calculation of colour differences Textiles - Tests for colour fastness Part N01: Colour fastness to bleaching: Hypochlorite Textiles - Tests for colour fastness Part X05: Colour fastness to organic solvents Textiles - Tests for colour fastness Part X11: Colour fastness to hot pressing 1 1 1 SANS 105-E04:2009/ISO 105-E04:2008, IDT, Ed. 5 (SABS ISO 105-E04) SANS 105-E05:2008/ISO 105-E05:2006, IDT, Ed. 4 2 2 SANS 105-E06:2008/ISO 105-E06:2006, IDT, Ed. 4 2 SANS 105-E07:2004/ISO 105-E07:1989, IDT, Ed. 3 1 SANS 105-F:1985/ISO 105-F:1985, IDT, Ed. 3 (SABS ISO 105-F) SANS 105-F01:2001/ISO 105-F01:2001, IDT, Ed. 1 (SABS ISO 105-F01) SANS 105-F03:2001/ISO 105-F03:2001, IDT, Ed. 1 (SABS ISO 105-F03) SANS 105-F04:2001/ISO 105-F04:2001, IDT, Ed. 1 (SABS ISO 105-F04) SANS 105-F05:2001/ISO 105-F05:2001, IDT, Ed. 1 (SABS ISO 105-F05) SANS 105-F06:2000/ISO 105-F06:2000, IDT, Ed. 1 (SABS ISO 105-F06) SANS 105-F07:2001/ISO 105-F07:2001, IDT, Ed. 1 (SABS ISO 105-F07) SANS 105-F10:1989/ISO 105-F10:1989, IDT, Ed. 1 (SABS ISO 105-F10) SANS 105-J01:2003/ISO 105-J01:1997, IDT, Ed. 4 1 1 1 1 1 1 1 1 1 SANS 105-J03:2003/ISO 105-J03:1995, IDT, Ed. 1 1 SANS 105-N01:1993/ISO 105-N01:1993, IDT, Ed. 2 (SABS ISO 105-N01) SANS 105-X05:1994/ISO 105-X05:1994, IDT, Ed. 4 (SABS ISO 105-X05) SANS 105-X11:1994/ISO 105-X11:1994, IDT, Ed. 4 (SABS ISO 105-X11) 1 1 1 Page 5 Standards available in electronic format (PDF) October 2009 SANS Number SANS 105-X12:2006/ISO 105-X12:2002, IDT, Ed. 5 (SABS ISO 105-X12) SANS 105-X16:2004/ISO 105-X16:2001, IDT, Ed. 1 Edition Title 3 Textiles - Tests for colour fastness Part X12: Colour fastness to rubbing Textiles - Tests for colour fastness Part X16: Colour fastness to rubbing - Small areas White metal designated WM 66 1 SANS 106:2009 1.01 SANS 107:2009 1.01 White metal designated WM 72 SANS 108:2009 1.01 White metal designated WM 80 SANS 109:2009 1.01 White metal designated WM 84 SANS 110:1973 (SABS 110) SANS 111:2009/ISO 835:2007, IDT, Ed. 1 1 Sealing compounds for the building industry, twocomponent, polysulphide base Laboratory glassware - Graduated pipettes 1 SANS 112:2009/ISO 648:2008, IDT, Ed. 2 (SABS ISO 648) SANS 113:1976/ISO 383:1976, IDT, Ed. 1 (SABS ISO 383) SANS 114:1978/ISO 384:1978, IDT, Ed. 1 (SABS ISO 384) SANS 115:2009/ISO 385:2005, IDT, Ed. 1 2 Laboratory glassware - Single volume pipettes 1 Laboratory glassware - Interchangeable conical ground joints Laboratory glassware - Principles of design and construction of volumetric glassware Laboratory glassware - Burettes 1 1 SANS 116:2007 (SABS 116) SANS 117:1975/ISO 1769:1975, IDT, Ed. 1 (SABS ISO 1769) SANS 120:2009 (SABS 120) SANS 121:2000/ISO 1461:1999, IDT, Ed. 2 (SABS ISO 1461) SANS 122:2007 (SABS 122) SANS 123:1981/ISO 865:1981, IDT, Ed. 1 (SABS ISO 865) SANS 124:2009 2.01 Liquid antiseptics containing substituted phenolics 1 Laboratory glassware - Pipettes - Colour coding 2 Stemming for use in blasting 1.01 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods Pressure-sensitive adhesive tapes for electrical purposes (Metric units) Slots in platens for projection welding machines 1.03 1 1.01 White metal designated WM 90 SANS 125:1997/ISO 925:1997, IDT, Ed. 3 (SABS ISO 925) SANS 126:1989/ISO 924:1989, IDT, Ed. 2 (SABS ISO 924) 1 Solid mineral fuels - Determination of carbonate carbon content - Gravimetric method Coal preparation plant - Principles and conventions for flowsheets 1 Page 6 2 (SABS ISO 140-2) 1 SANS 140-3:1995/ISO 140-3:1995.One-mark volumetric flasks 1 Thermoplastics pipes. IDT. Ed. Ed. verification and application of precision data Acoustics . IDT. 3 (SABS ISO 1171) SANS 132:2009/ISO 1170:2008. Ed. 2 (SABS ISO 140-4) 1 SANS 140-5:1998/ISO 140-5:1998. 1 Edition Title 2 Laboratory glassware .Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor SANS 140-2:1991/ISO 140-2:1991. Ed. IDT.Vocabulary Part 1: Terms relating to coal preparation Metallic coatings . 2 (SABS ISO 1170) SANS 133:1993/ISO 1213-1:1993. IDT. Ed.Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission Acoustics . Ed. IDT. Ed. Ed.01 1.01 Resin cored solders (highly activated) 1 Acoustics .Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium Metallic coatings . 3 (SABS ISO 1458) SANS 137:2009 (SABS 137) SANS 138:2009 (SABS 138) SANS 140-1:1997/ISO 140-1:1997.Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of facade elements and facades Acoustics . 4 (SABS ISO 1042) SANS 130-1:2007/ISO 1167-1:2006. fittings and assemblies for the conveyance of fluids .Determination of ash content SANS 131:1997/ISO 1171:1997. Ed. IDT. IDT. 2 (SABS ISO 140-8) 1 1 Page 7 . 2 (SABS ISO 140-5) 1 SANS 140-7:1998/ISO 140-7:1998.Electrodeposited coatings of nickel Resin cored solders (non-corrosive) 1 2 2 1. IDT. IDT. IDT. Ed. 3 (SABS ISO 140-1) 1 2 Coal and coke .Determination of the resistance to internal pressure Part 1: General method Solid mineral fuels .Calculation of analyses to different bases Solid mineral fuels . Ed.Measurement of sound insulation in buildings and of building elements Part 2: Determination. Ed. IDT. Ed. 2 (SABS ISO 140-7) SANS 140-8:1997/ISO 140-8:1997. IDT.Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms Acoustics . 2 (SABS ISO 1213-1) SANS 135:2008/ISO 1456:2003. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 128:1998/ISO 1042:1998. IDT. IDT.Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors Acoustics .Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements Acoustics . 3 (SABS ISO 1456) SANS 136:2008/ISO 1458:2002. 2 (SABS ISO 140-3) 1 SANS 140-4:1998/ISO 140-4:1998. 01 Electric irons for household or similar use 3. Ed. Ed.03 1 Textile floor coverings . 2 (SABS ISO 1765) SANS 151:2008 (SABS 151) SANS 153:2006 (SABS 153) SANS 154:2005 (SABS 154) SANS 155:1999/ISO 1766:1999.05 Electric room heaters 1 Plastics .01 Lidocaine (lignocaine) hydrochloride and noradrenaline (norepinephrine) injection for dental use Metallic and oxide coatings . cooking tops. IDT. 2 (SABS ISO 1763) SANS 148-1:2007/ISO 148-1:2006. Ed. 4 (SABS ISO 1873-1) 2. 1 2. IDT. Ed. ovens. IDT.02 2. IDT.Determination of number of tufts and/or loops per unit length and per unit area Metallic materials .Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications Page 8 .Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors Acoustics .Charpy pendulum impact test Part 1: Test method Absorbent cotton wool and cotton-and-viscose wool products Machine-made textile floor coverings Determination of thickness Fixed electric storage water heaters 2 1 1 SANS 149:2009 (SABS 149) SANS 150:1986/ISO 1765:1986.08 Electric stoves.02 Narrow elastic fabrics and strip 3. 3 (SABS ISO 1463) SANS 147:1986/ISO 1763:1986.Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field Glass-reinforced polyester (GRP) laminates SANS 140-14:2005/ISO 140-14:2004.Measurement of coating thickness .03 4. IDT.Determination of thickness of pile above the substrate Moulded-case circuit-breakers 3.04 Electrical appliances for heating liquids 3. 3 (SABS ISO 1766) SANS 156:2007 (SABS 156) SANS 158:2003 (SABS 158) SANS 159:2006 (SABS 159) SANS 160:2008 (SABS 160) SANS 161-1:1995/ISO 1873-1:1995. Ed. and similar appliances Electric cooking plates and surface unit heaters 3. Ed.04 1 6.Standards available in electronic format (PDF) October 2009 SANS Number SANS 140-11:2005/ISO 140-11:2005.02 4. 1 1 SANS 141:2006 (SABS 141) SANS 142:2001 (SABS 142) SANS 143:2007 (SABS 143) SANS 144:2008/ISO 1463:2003. Ed.Microscopical method Carpets . IDT. 1 Edition Title 1 Acoustics . IDT. IDT. Ed. grills. nitrite. non-rewirable plugs. Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 4: Dedicated system.Standards available in electronic format (PDF) October 2009 SANS Number SANS 161-2:1997/ISO 1873-2:1997.c. 3 (SABS ISO 1524) 2 2 1 Paints and varnishes . using liquid chromatography of ions Part 1: Method for water with low contamination Water quality . varnishes and printing inks . IDT. 3 (SABS ISO 1513) SANS 175:2006/ISO 1514:2004.c. Ed.Examination and preparation of samples for testing Paints and varnishes . IDT.01 SANS 164-5:2007 1.Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Gas cylinders . nitrate and sulfate ions. Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 5: Twopole. 6 A 250 V a. IDT. Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 2: IEC system. Ed.c.5 A 250 V a. for connection of class II equipment Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 6: Twopole systems.c.Surface-drying test . chloride. 16 A 250 V a. 3 (SABS ISO 10286) SANS 163-1:1992/ISO 10304-1:1992. orthophosphate. 1 (SABS ISO 10304-2) 1 SANS 164-0:2007 1.Terminology 3 1 Water quality .c. IDT. 2 (SABS ISO 1873-2) SANS 162:2008/ISO 10286:2007.Bend test (cylindrical mandrel) Paints.. 16 A 250 V a.01 SANS 164-6:2009 1. 1 (SABS ISO 10304-1) Edition Title 1 Plastics . IDT. bromide. Ed. IDT. 1 (SABS ISO 1517) SANS 177:2004/ISO 1519:2002. 2 (SABS ISO 1519) SANS 178:2006/ISO 1524:2000.Determination of fineness of grind 2 2 Page 9 . for connection of class II equipment Free alkali content and free acid content of light coloured soap products Glassware and equipment for microbiological tests SANS 163-2:1995/ISO 10304-2:1995. Ed.Determination of dissolved fluoride.Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide. 2.. IDT. Ed. nitrate. IDT. Ed. Ed. chloride. Ed.01 SANS 164-4:2007 1.Standard panels for testing 2 1 Paints and varnishes .01 SANS 164-1:2007 (SABS 164-1) SANS 164-2:2006 (SABS 164-2) SANS 164-3:2007 5. nitrite. IDT.c.01 3 1. 16 A 250 V a.Ballotini method Paints and varnishes . with cord.02 SANS 169:2006 (SABS SM 184) SANS 171:2006 (SABS SM 552) SANS 174:1992/ISO 1513:1992. Ed. 16 A 250 V a. 4 (SABS ISO 1514) SANS 176:1973/ISO 1517:1973. Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 3: Conventional system. orthophosphate and sulfate in waste water Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 0: General and safety requirements Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 1: Conventional system. 02 Expanded metal Part 2: Building products 2.01 Primary cells and batteries 3 Thermostats for electric storage water heaters 1.03 2.05 1.02 Conductors for overhead electrical transmission lines Part 1: Copper wires and stranded copper conductors Conductors for overhead electrical transmission lines Part 2: Stranded aluminium conductors Conductors for overhead electrical transmission lines Part 3: Aluminium conductors.01 1 The determination of peeling load of direct moulded footwear Immersion-type heating units for electrical appliances Energy regulators for electric heating units 3.01 3 Pesticides: Foaming of wettable powders and suspension concentrates Page 10 .02 1.02 3.03 Butyl rubber sheet (for waterproofing) 4.01 Cast steel gate valves 1 Pesticides: Biological evaluation of the efficacy of molluscicides Fire dampers 2.01 1.01 Short-link steel chain (medium-tolerance) for lifting purposes Expanded metal Part 1: Sheets and plates 2.01 Mutton cloth 3.01 1. steel reinforced Conductors for overhead electrical transmission lines Part 4: Copper-covered steel wire for telecommunication purposes Conductors for overhead electrical transmission lines Part 5: Zinc-coated steel wires for conductors and stays The production of sorghum beer 1.04 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 179:2007 (SABS 179) SANS 180:2004 (SABS 180) SANS 181:2004 (SABS 181) SANS 182-1:2008 (SABS 182-1) SANS 182-2:2008 (SABS 182-2) SANS 182-3:2003 (SABS 182-3) SANS 182-4:2008 (SABS 182-4) SANS 182-5:2008 (SABS 182-5) SANS 183:2007 (SABS 183) SANS 184:1973 (SABS SM 667) SANS 185:2005 (SABS 185) SANS 186:2003 (SABS 186) SANS 187:2007 (SABS 187) SANS 189:2006 (SABS 189) SANS 190-1:2008 (SABS 190-1) SANS 190-2:2008 (SABS 190-2) SANS 191:2008 (SABS 191) SANS 192:1978 (SABS SM 822) SANS 193:2004 (SABS 193) SANS 194:2006 (SABS SM 826) Edition Title 2. 5 (SABS CISPR 11) SANS 212:2009/CISPR 12:2009. boats. fines content and dust content of aggregates Chloride content of aggregates 2 2 Bactericidal and algaecidal efficacy of swimming pool chemicals Energy efficiency in buildings Part 1: General requirements Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control Energy efficiency in buildings Part 3: The application of the energy efficiency requirements for buildings with artificial ventilation or air conditioning Road vehicles .Radiofrequency disturbance characteristics . 6. and internal combustion engines Radio disturbance characteristics . 2 2 SANS 207:2006 1 SANS 208:2005 1 SANS 211:2009/CISPR 11:2009.02 Sieve analysis. 4.Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max. scientific and medical equipment . IDT.Limits and methods of measurement Vehicles. IDT.) The design and construction of reinforced soils and fills The design and installation of compressed natural gas (CNG) vehicle filling stations Industrial.Standards available in electronic format (PDF) October 2009 SANS Number SANS 195:2006 (SABS SM 827) SANS 196:2007 (SABS 196) SANS 197:2006 (SABS SM 828) SANS 198:2009 (SABS 198) SANS 199:2009 (SABS 199) SANS 200:2008 (SABS 200) SANS 201:2008 (SABS SM 829) SANS 202:2006 (SABS SM 830) SANS 203:2007 (SABS SM 1158) SANS 204-1:2008 Edition Title 2.Radio disturbance characteristics .01 Preparation of test samples of aggregates 4. IDT. Ed.Limits and methods of measurement 1 SANS 204-2:2008 1 SANS 204-3:2008 1 SANS 205:2009/ISO 6118:2006.02 Page 11 .2 (SABS CISPR 13) 3.01 Sampling of aggregates 3 Orthopaedic padding 2. Ed.1 (SABS CISPR 12) 4 4. Ed. 2 2 SANS 206:2009/ISO 6119:2006.02 Functional-control valves and safety valves for domestic hot and cold water supply systems Shut-off valves for refillable liquefied petroleum gas cylinders Copper alloy ingots and castings 2 3.Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (service temperature 70 °C max. Ed.01 SANS 213:2006/CISPR 13:2006. Ed. IDT. IDT.) Road vehicles .03 2.Limits and methods of measurement for the protection of offboard receivers Sound and television broadcast receivers and associated equipment . Product family standard Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and immunity measuring apparatus Measuring apparatus Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus Ancillary equipment . IDT. electric tools and similar apparatus Part 1: Emission Electromagnetic compatibility . Ed. Ed. 7. 1. 2 2 SANS 216-4-2:2004/CISPR 16-4-2:2003.1 2. IDT. Ed. Ed. Ed.Disturbance power Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment . 5. IDT. IDT.Measurement of disturbance power Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity . Ed. electric tools and similar apparatus Part 2: Immunity . Ed. IDT.02 SANS 216-1-2:2007/CISPR 16-1-2:2006. statistics and limit modelling Uncertainty in EMC measurements 1.Radiated disturbances Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus Antenna calibration test sites for 30 MHz to 1 000 MHz Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity .1 (SABS CISPR 14-1) SANS 214-2:2009/CISPR 14-2:2008. IDT.Requirements for household appliances.02 SANS 215:2009/CISPR 15:2009. Ed. 2. IDT. 2 1 SANS 216-4-1:2009/CISPR/TR 16-4-1:2009.Conducted disturbances Specification for radio disturbance and immunity measuring apparatus and methods Part 1-3: Radio disturbance and immunity measuring apparatus Ancillary equipment . 1. Ed.Requirements for household appliances. Ed.2 2. 2 2 SANS 216-1-4:2008/CISPR 16-1-4:2008. 1 1 Page 12 . IDT. IDT.02 SANS 216-1-3:2005/CISPR 16-1-3:2004. 1 1 SANS 216-2-1:2009/CISPR 16-2-1:2008. 1 1 SANS 216-3:2005/CISPR/TR 16-3:2003. IDT. IDT. Ed.01 SANS 216-1-5:2004/CISPR 16-1-5:2003.02 SANS 216-2-3:2007/CISPR 16-2-3:2006.2 1. statistics and limit modelling Uncertainties in standardized EMC tests Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 214-1:2009/CISPR 14-1:2009.01 Electromagnetic compatibility . Ed. IDT.2 (SABS CISPR 14-2) Edition Title 3. IDT.2 1. Ed. 2.2 (SABS CISPR 15) 4.Immunity measurements Specification for radio disturbance and immunity measuring apparatus and methods Part 3: CISPR technical reports Specification for radio disturbance and immunity measuring apparatus and methods Part 4-1: Uncertainties. 2 2 SANS 216-2-4:2004/CISPR 16-2-4:2003. 2 2 SANS 216-2-2:2006/CISPR 16-2-2:2005. IDT.Radiated disturbance measurements Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement of disturbances and immunity . IDT.Conducted disturbance measurements Specification for radio disturbance and immunity measuring apparatus and methods Part 2-2: Methods of measurement of disturbances and immunity . Ed.02 SANS 216-1-1:2008/CISPR 16-1-1:2007. 1. Limits and methods of measurement for the protection of onboard receivers Water taps (metallic bodies) 2 SANS 226:2004 (SABS 226) SANS 227:2007 (SABS 227) SANS 228:2007 (SABS 228) SANS 232:2003 (SABS 232) SANS 235:2008 (SABS 235) SANS 236:2008 (SABS 236) 5. Ed. Ed. statistics and limit modelling Statistics of complaints and a model for the calculation of limits for the protection of radio services Radio interference characteristics of overhead power lines and high-voltage equipment Part 1: Description of phenomena Radio interference characteristics of overhead power lines and high-voltage equipment Part 2: Methods of measurement and procedure for determining limits Radio interference characteristics of overhead power lines and high-voltage equipment Part 3: Code of practice for minimizing the generation of radio noise Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz Dissolved acetylene cylinders SANS 216-4-3:2007/CISPR/TR 16-4-3:2007. Ed.Limits and methods of measurement Vehicles. 1 1 SANS 218-2:2005/CISPR 18-2:1986.04 Burnt clay masonry units 4 Absorbent cotton wool 3. statistics and limit modelling Statistical considerations in the determination of EMC compliance of mass-produced products Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties. 1 (SABS CISPR 24) SANS 225:2008/CISPR 25:2008. IDT.01 2. IDT.01 4. IDT. 2 2 SANS 218-1:2005/CISPR 18-1:1982. IDT. 1 1 SANS 220:2009 (SABS 220) SANS 222:2009/CISPR 22:2008.01 1 Information technology equipment . 1 1 SANS 219:2005/CISPR 19:1983.02 Detergent for industrial dishwashing equipment 3 General purpose pure soap 3 Filled bar soap Page 13 . boats and internal combustion engines Radio disturbance characteristics . IDT. 3 3. IDT. IDT. Ed. IDT.Radio disturbance characteristics . Ed.Limits and methods of measurement Writing equipment . IDT. 6 (SABS CISPR 22) SANS 223:2006 (SABS 223) SANS 224:1997/CISPR 24:1997. 2. 1 1 SANS 218-3:2005/CISPR 18-3:1986. Ed. Ed.1 SANS 216-4-4:2008/CISPR/TR 16-4-4:2007. Ed.Coloured chalks and pastels 3.02 6 Information technology equipment . Ed.Immunity characteristics .Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Specification for radio disturbance and immunity measuring apparatus and methods Part 4-3: Uncertainties. Rubber-tyred machines Steering requirements Earth-moving machinery . 1 2. IDT. IDT. IDT. IDT. Ed.Basic types . Ed. 3 5 1 SANS 254:2003/ISO 5010:1992.Crawler machines Performance requirements and test procedures for braking systems Liquid furniture polish (non-wax emulsion type) SANS 251:2006 (SABS 251) SANS 252:2003/BS 4089:1999. Ed. Ed. IDT.04 Wax stoep polish 1 Earth-moving machinery . IDT.01 Gypsum plasterboard Page 14 . 5 2 SANS 265:2005 (SABS 265) SANS 266:2003 (SABS 266) 3.01 5.01 Drinking water 5 Stainless steel sinks with draining boards (for domestic use) Wax crayons 2 1 Code of practice for fire protection for electronic equipment installations Bituminous damp-proof courses SANS 248:2007 (SABS 248) SANS 250:2003/ISO 10012:2003. Ed. 1 3.Requirements for measurement processes and measuring equipment Long-link and extra-long-link medium tolerance steel chains for general purposes Metallic hose assemblies for liquid petroleum gases and liquefied natural gases Earth-moving machinery . 3 Edition Title 3 Toilet soap 3 Liquid toilet soap 3 Carbolic soap 6. IDT. Ed.Identification and terms and definitions Gummed paper tape (Metric units) SANS 261:2008/ISO 6165:2006. 2 1 SANS 255:2003/ISO 10265:1998. Ed. 1 1 SANS 256:2004 (SABS 256) SANS 257:2008 (SABS 257) SANS 258:2008 (SABS 258) SANS 259:2008/ISO 5006:2006.01 2.Operator's field of view Test method and performance criteria Earth-moving machinery .01 1 Measurement management systems .03 Wax shoe polish 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 237:2008 (SABS 237) SANS 238:2008 (SABS 238) SANS 240:2008 (SABS 240) SANS 241:2006 (SABS 241) SANS 242:2003 (SABS 242) SANS 244:1978 (SABS 244) SANS 246:2004/BS 6266:2002. and combined filters Requirements.Management of polychlorinated biphenyls (PCBs) SANS 290:2007 1 Page 15 . Ed. for generalpurpose water applications . 2 1 SANS 280:2008 (SABS 280) SANS 282:2004 (SABS 82) SANS 284:2004 (SABS 284) SANS 285:1994 (SABS 285) SANS 286-1:1988/ISO 286-1:1988. Ed. manufacture.04 3 Calcium silicate masonry units 1 ISO system of limits and fits Part 1: Bases of tolerances. IDT. deviations and fits ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts Anti-bacterial liquid toilet soap for medical use 1 1. IDT.Filters with breathing hoses. 1 (SABS ISO 286-1) SANS 286-2:1988/ISO 286-2:1988. Ed. IDT. IDT. IDT. Ed. shovels. Ed. marking Paints and varnishes .Scratch test SANS 272:2005/ISO 1403:2005. for generalpurpose water applications . textile-reinforced.06 1. 1 1 SANS 279:2004/ISO 1518:1992. testing. marking Respiratory protective devices . and picks Wooden handles for forks.Specification The design.01 Bending dimensions and scheduling of steel reinforcement for concrete Spades and shovels 2. Ed. mattocks. IDT.Guidelines for quality management in projects Respiratory protective devices . Ed. (Non-mask mounted filters) Particle filters. and spades SANS 268:1975 (SABS 268) SANS 269:2008 (SABS 269) SANS 271:2005/ISO 6224:2005.01 Hole location in fencing posts and droppers 5. testing. gas filters. 1 1 SANS 277:2004/EN 12021:1998. 3 2 2.Requirements. textile-reinforced. maintenance and safe operation of chairlifts in mines Quality management systems . 2 1 SANS 275:2004/EN 12083:1998. IDT. 4 2 SANS 273:2007 1 SANS 274:2004/ISO 10006:2003. IDT.02 2 Thermoplastics hoses. 1 1 SANS 278:2004/EN 12419:1999.Standards available in electronic format (PDF) October 2009 SANS Number SANS 267:2005 Edition Title 1 Technical requirements for telex CPE terminals intended for connection to the public telex network Wooden handles for beater picks. 1 (SABS ISO 286-2) SANS 288:2000 (SABS 288) SANS 289:2008 2.Specification Rubber hoses. IDT.Light duty construction compressed air line breathing apparatus incorporating a full face mask.Compressed air for breathing apparatus Respiratory protective devices . Ed. Ed.02 Labelling requirements for prepackaged products (prepackages) and general requirements for the sale of goods subject to legal metrology control Mineral insulating oils . half mask or quarter mask . 3 3 5.Colony count by inoculation in a nutrient agar culture medium Milk and milk products .Enumeration of culturable microorganisms . Ed.Standard atmospheres for conditioning and testing Wooden handles for hammers SANS 292:1975 (SABS 292) SANS 294:2004 2 1 Construction procurement processes. IDT. Ed. 2 1 Page 16 . ungraduated counter scales subject to legal metrology control Linen threads for footwear SANS 302:2005 1 SANS 303:2005 1 SANS 304:2008 (SABS 304) SANS 305:2007 3. IDT. Ed.01 Mastic asphalt for damp-proof courses and tanking 1 Fences Part 12: Specification for steel palisade fences Non-automatic. IDT. IDT. non-self-indicating or semi-selfindicating. Ed. IDT. Ed.01 Sodium hypochlorite solutions 3 Mastic asphalt for roofing 3.02 Cutback bitumen (Metric units) 3.03 Anionic bitumen road emulsions 1 Storage tank facilities for hazardous chemicals Part 1: Above-ground storage tank facilities for nonflammable chemicals Category L motor vehicles SANS 311:2007 2 SANS 313:2004/ISO 6222:1999.07 2. undenominated beam scales and balances subject to legal metrology control Non-automatic. methods and procedures Calcium hypochlorite SANS 295:2007 (SABS 295) SANS 296:2008 (SABS 296) SANS 297:1975 (SABS 297) SANS 298:2007 (SABS 298) SANS 301-12:2004/BS 1722-12:1999.Guidance on sampling SANS 314:2005/ISO 707:1997. 2 1 Water quality . 3 1 Fire extinguishing installations and equipment on premises Part 4: Specification for carbon dioxide systems Penetration grade bitumens SANS 307:2005 (SABS 307) SANS 308:2009 (SABS 308) SANS 309:2004 (SABS 309) SANS 310-1:2007 3. 2 Edition Title 1 Plastics .Standards available in electronic format (PDF) October 2009 SANS Number SANS 291:2003/ISO 291:1997.01 1 Winged infusion sets (sterile-packed for single use) SANS 306-4:2003/BS 5306-4:2001. MOD. 3 3.Cryogenic liquids and other selected liquid gases in vertical tanks . 2 Edition Title 1 Milk . MOD 1 SANS 320:2008 (SABS 320) SANS 321:2008 (SABS 321) SANS 322:2005 4 4 1 SANS 325:2004/ISO/TR 10017:2003.Determination of nitrogen . IDT.Safety requirements for combustion and fuel-handling systems Fire extinguishing aerosol systems SANS 326:2004/ISO/IEC 20060:2001. is by means of Dual Tone Multi Frequency (DTMF) signalling Stove couplers SANS 333:1996/ISO 333:1996. Ed. 2 (SABS ISO 334) SANS 336:2005/ETSI TBR 21:1998. 1 1 Public Switched Telephone Network (PSTN).Virtual machine specification Over-needle peripheral catheters (sterile-packed for single use) Industrial thermoprocessing equipment .Standards available in electronic format (PDF) October 2009 SANS Number SANS 315:2005/ISO 1211:1999. IDT. Ed.Determination of fat content .Semi-micro Kjeldahl method Solid mineral fuels . 1 1 1 2 SANS 337:2005 1 Page 17 .Gravimetric method (Reference method) Industrial hand protectors (leather and fabric) and leather protective clothing Industrial bitumens SANS 316:2002 (SABS 316) SANS 317:2007 (SABS 317) SANS 318:2005/ISO 1736:2000. if provided.Pressure differential method The production of men's heavy boots. Attachment requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe Coal . Ed.01 2. Attachment requirements for pan-European approval for connection to the analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE supporting the voice telephony service) in which network addressing. Ed.Gravimetric method (Reference method) Measuring systems . Ed. 2 1 Guidance on statistical techniques for SANS 9001:2000 Information technology . IDT. IDT. IDT.Determination of fat content . 4 (SABS ISO 333) SANS 334:1992/ISO 334:1992.05 1 Dried milk and dried milk products . IDT. service type (Goodyear welted) The production of men's boots (Goodyear welted. with stitched or stuck-on outer soles) Fire detection and alarm systems for hospitals SANS 319:2008/OIML R 125:1998.Determination of total sulfur Eschka method Terminal Equipment (TE). IDT. Ed. Ed. Ed. 1 1 SANS 327:2007 1 SANS 329:2008 1 SANS 331:2005 1 SANS 332:2004/ETSI TBR 38:1998.Open Terminal Architecture (OTA) specification . Ed.Dynamic load ratings and rating life Rolling bearings . IDT. IDT. Ed. IDT. 1 1 SANS 356:2005/ISO 492:2002. 1 (SABS ISO 349) SANS 350-1:2005/ISO 1132-1:2000. Ed. 3 2 Conveyor belts . Ed.02 Steel bedside lockers 1 Dynamic measuring devices and systems for cryogenic liquids Woven worsted fabrics SANS 346:2008 (SABS 346) SANS 347:2007 5. NEQ 4.Requirements and test method Picks. IDT. IDT. 1 1 SANS 355:2005/ISO 355:1977.Metric tapered roller bearings Boundary dimensions and series designations Rolling bearings .Static load ratings SANS 350-2:2005/ISO 1132-2:2001. Ed. 2 1 Rolling bearings . beater picks and mattocks SANS 341:2007 (SABS 341) SANS 342:2006 (SABS 342) SANS 343:2004 (SABS 343) SANS 344:2005/OIML R81:1998. sterile packed for singleuse Hard coal . 3 2 SANS 352:2005/ISO 104:2002. IDT. 2 1 SANS 354:2005/ISO 281:1990. Ed. 4 1 SANS 357-17:2005/ISO 683-17:1999. 2 1 Heat-treated steels. IDT. Ed. Ed.Laboratory scale flammability characteristics . 1 1 1 Rolling bearings .Standards available in electronic format (PDF) October 2009 SANS Number SANS 339:2007 Edition Title 1 Sorbents for hydrocarbon-based products SANS 340:2006/ISO 340:2004. 3 1 Rolling bearings . IDT. Ed. IDT. general plan Rolling bearings . IDT.Plummer block housings Boundary dimensions Rolling bearings .01 1 Categorization and conformity assessment criteria for all pressure equipment Safety surgical scalpels.Thrust bearings . Ed.Tolerances Part 2: Measuring and gauging principles and methods Rolling bearings . Ed. IDT.Audibert-Arnu dilatometer test SANS 348:2006 1 SANS 349:1975/ISO 349:1975.Boundary dimensions.Radial internal clearance Page 18 . Ed.Instrument precision bearings SANS 358:2005/ISO 1224:1984. 1 1 SANS 351:2007/ISO 76:2006.Tolerances SANS 353:2005/ISO 113:1999. 1 1 SANS 359:2005/ISO 5753:1991. IDT.Radial bearings . alloy steels and free-cutting steels Part 17: Ball and roller bearing steels Rolling bearings . Ed. IDT.Tolerances Part 1: Terms and definitions Rolling bearings .02 4 Automotive diesel fuel 4. IDT. Ed. Ed. IDT.Assemblies and components Plain bearings . Ed. IDT 1 Standard test methods for selenium in water SANS 379:2005/ASTM D 3697:2002. Ed. 1 2 SANS 364:2005/ISO 6045:1987. IDT. Ed.Needle roller bearing track rollers .Standards available in electronic format (PDF) October 2009 SANS Number SANS 360:2005/ISO 7063:2003. IDT 1 Standard test method for aluminium in water Page 19 . IDT 1 Standard test method for antimony in water SANS 381:2007/ASTM D 857:2002.Aluminium alloy for solid bearings SANS 361:2005/ISO 10317:1992. Ed. IDT 1 Standard test methods for arsenic in water SANS 377:2005/ASTM D 3859:2003.Metallic thin-walled half bearings Determination of the sigma 0. 1 1 Plain bearings . Ed.01 SANS 369-1:2004/BS 7273-1:2000. IDT.01*-limit Aloe raw material SANS 367:2005/ISO 6282:1983. 1 1 SANS 363:2007/ISO 10129:2006.Boundary dimensions and tolerances Rolling bearings . IDT 1 SANS 375:2005/ASTM D 1889:2000. IDT. IDT. IDT.Bearings for derrick goosenecks . 1 1 SANS 368:2008 1.Testing of bearing metals Resistance to corrosion by lubricants under static conditions Shipbuilding and marine structures .Requirements on backings for thickwalled multilayer bearings Plain bearings . 1 1 SANS 365:2005/ISO 6279:1979. 2 Edition Title 1 Rolling bearings . Ed. 2 1 Code of practice for the operation of fire protection measures Part 1: Electrical actuation of gaseous total flooding extinguishing systems Code of practice for the operation of fire protection measures Part 2: Mechanical actuation of gaseous total flooding and local application extinguishing systems Steel mesh reinforced polyethylene (PE) pipes for water supply Steel mesh reinforced polyethylene (PE) pipe fittings for water supply Reprocessing of endoscopes Part 1: Flexible endoscopes and accessories Reprocessing of endoscopes Part 2: Rigid endoscopes. IDT. IDT 1 Standard test method for turbidity of water SANS 376:2005/ASTM D 2972:2003. associated components and accessories Standard test methods for chloride ion in water SANS 369-2:2004/BS 7273-2:1992.Metric tapered roller bearings Designation system Plain bearings . 1 1 SANS 370:2009 1. Ed. 1 1 SANS 366:2005/ISO 6280:1981.01 SANS 371:2005 1 SANS 373-1:2009 2 SANS 373-2:2009 1 SANS 374:2005/ASTM D 512:2004. IDT. Ed.03 1 Non-destructive testing .Determination of forms of sulfur SANS 403:2005/ISO 1018:1975.Ultrasonic inspection Vocabulary Non-destructive testing . IDT.01 Commercial dextrose and liquid glucose 2.Industrial X-ray and gamma-ray radiology .01 Commercial lactose 3.02 Page 20 . Ed.05 Forks and rakes 1 Non-destructive testing . Ed. 2 1 SANS 399:2005 1 SANS 401:2005/ASTM D440:1986. Ed.Ultrasonic inspection Characterization of search unit and sound field Scaffolding Part 3: Specification for prefabricated mobile access and working towers . Ed. 2 1 SANS 395:2004/ISO 5580:1985. IDT. IDT.Alternative design and construction Standard test method of drop shatter test for coal SANS 394:2004/ISO 5579:1998.Radiographic examination of metallic materials by X. IDT 1 Standard test methods for lead in water SANS 385:2006 (SABS 385) SANS 387:2008 (SABS 387) SANS 388:2007 (SABS 388) SANS 389:2007 (SABS 389) SANS 390:2008 (SABS 390) SANS 391:2004/ISO 5576:1997.and gamma-rays . Ed. IDT. 1 4 Fabric linings for footwear 2. IDT 1 Standard test methods for zinc in water SANS 384:2007/ASTM D 3559:2003. Ed.(Implementation of HD 1004) Transportable refillable welded stainless steel cylinders for low pressure gases . IDT 1 SANS 402:2005/ISO 157:1996. Ed.Minimum requirements Non-destructive testing . IDT.Determination of moisture-holding capacity Phosphorus deoxidized non-arsenical copper SANS 404:2009 (SABS 404) 2.Industrial radiographic illuminators .Standards available in electronic format (PDF) October 2009 SANS Number SANS 382:2007/ASTM D 1068:2005. 1 1 SANS 398-3:2005/BS 1139-3:1994. IDT. IDT.Vocabulary Filler rods for braze welding SANS 392:2008 (SABS 392) SANS 393:2004/ISO 5577:2000. IDT Edition Title 1 Standard test methods for iron in water SANS 383:2007/ASTM D 1691:2002. 1 2.Basic rules Non-destructive testing . 2 1 Coal . IDT. 1 1 SANS 396:2004/ISO 10375:1997. 1 1 Hard coal .06 Hammer heads and hand hammers 2. IDT.3:1988.Analysis and testing . MOD 3. IDT.Analysis and testing .10.Determination of arsenic. IDT. 1 2.Determination of trace elements .Higher rank coal ash and coke ash .Vocabulary Part 1: Theory and application Terminology work .01 5 The production of men's shoes (Goodyear welted with stitched or stuck-on outer soles) Hospital nurses' shoes (Goodyear welted construction) Terminology work .Standards available in electronic format (PDF) October 2009 SANS Number SANS 405:2009 (SABS 405) SANS 406:2006/AS 1038. 1 1 SANS 428:2007 1.Analysis and testing .Vocabulary Part 2: Computer applications Fire performance classification of thermal insulated building envelope systems Plain bearings . MOD 1 SANS 416:2007 (SABS 416) SANS 417:2006 (SABS 417) SANS 419:2007 (SABS 419) SANS 420:2007 (SABS 420) SANS 421:2008 (SABS 421) SANS 422:2008 (SABS 422) SANS 427-1:2006/ISO 1087-1:2000.Major and minor elements Wavelength dispersive X-ray fluorescence spectrometric method Coal and coke . Ed.10.3:1999.Major and minor elements Acid digestion/flame atomic absorption spectrometric method Chemical resistant gloves SANS 409:2006/AS 1038.02 1 Coal and coke .Higher rank coal ash and coke ash .01 2.Determination of trace elements . antimony and selenium . coke and fly-ash Determination of eleven trace elements .Hydride generation method Coal and coke . 1 1 SANS 430:2005/ISO 10019:2005.10.14.Analysis and testing .2:2003.0:2002. MOD 1 SANS 412:2006/AS 1038. Ed. Ed. IDT.02 Phosphorus deoxidized arsenical copper 1 Coal and coke .Analysis and testing .01 SANS 429:2005/ISO/TR 6281:1990.Flame atomic absorption spectrometric method Coal and coke .05 3. MOD 1 SANS 414:2006/AS 1038.2:1998.Determination of trace elements .04 Stainless steelware for medical and catering services in institutions E glass fibre chopped strand mat for reinforcement of polyester and other liquid laminating systems Canners' sucrose 2.14. 1 1 Page 21 .Testing under conditions of hydrodynamic and mixed lubrication in test rigs Guidelines Guidelines for the selection of quality management system consultants and use of their services 5 1 SANS 427-2:2006/ISO 1087-2:2000. MOD 1 SANS 411:2006/AS 1038.Analysis and testing .Coal.Guide to the determination of trace elements Austenitic manganese steel castings SANS 407:2008 (SABS 407) SANS 408:2007/AS 1038. Ed. MOD Edition Title 2.10.Determination of boron content ICP-AES method Coal and coke .1:2003.Determination of trace elements . Guidelines for the content.01 1 SANS 451:2008 1 SANS 452:2008 1 SANS 453:2005/ISO 6059:1984. IDT.Mixture of azoles and permethrin White open-wove bandages SANS 443:2006 (SABS 443) SANS 445:2005/ISO 15:1998. guardrail posts and spacer blocks Part 3: Hardwood species Tolerances permitted for the accuracy of measurements of products (including prepackaged products) in terms of legal metrology legislation Lime for chemical and metallurgical purposes 6 1. IDT. 2 Edition Title 2.01 Indelible marking ink for textile fabrics 2 Barrier creams 4. general plan Absorbent gauze (fabric and swabs) and butter muslin The manufacture of soft drinks and soft drink concentrates Water quality .01 Liners and fluting for corrugated board 3.Generation of acceptable and repeatable spirograms Non-reusable and reusable sharps containers SANS 446:2006 (SABS 446) SANS 449:2009 (SABS 449) SANS 450:2005/ISO 6058:1984.01 SANS 459:2008 (SABS 459) 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 431:2007 (SABS 431) SANS 432:2007 (SABS 432) SANS 433:2008 (SABS 433) SANS 434:2008 (SABS 434) SANS 438:2005/ISO 999:1996. Ed. IDT.Radial bearings .Determination of calcium content EDTA titrimetric method Spirometry . guardrail posts and spacer blocks Part 2: Softwood species Wooden poles. droppers. 1 4 4. 1 1 Water quality . Ed.04 2.02 Boiler suits and workwear suits 1 Information and documentation . organization and presentation of indexes Sterilized water for injections SANS 440:2008 (SABS 440) SANS 441:2006 5 1 Timber preservative .04 6.05 Page 22 . droppers. Ed.Boundary dimensions. 2 3 1 Rolling bearings . IDT.EDTA titrimetric method Covered electrodes for the manual arc welding of carbon and carbon manganese steels Corrugated board containers SANS 455:2009 (SABS 455) SANS 456:2009 (SABS 456) SANS 457-2:2008 (SABS 457-2) SANS 457-3:2000 (SABS 457-3) SANS 458:2008 4.02 Wooden poles. Ed.Determination of the sum of calcium and magnesium . Ed. 1 Edition Title 4. 1 1 SANS 468:2007 (SABS SM 468) SANS 469:2006 (SABS 469) SANS 470:2003 (SABS 470) SANS 471:2003/ISO 471:1995.Brake performance and component strength Vehicle lifts SANS 476:2007/ISO 6055:2004. 1 1 SANS 481:2007 (SABS SM 481) SANS 484-1:2009 3 1 Page 23 . IDT. IDT. Ed. IDT. Ed. Ed. IDT.Guidelines for quality plans Electronic taximeters 1 SANS 465:2005/ASTM D4806-04a:2004. Ed.Photometric method (Reference method) Information and documentation . 1 1 SANS 479:2006/ISO 5738:2004.Artificial light and water spray exposure method Conveyor belting . IDT 1 SANS 466:2005/ISO 10005:2005. IDT. 1.Determination of copper content . 2 1 Milk and milk products . humidities and times for conditioning and testing Oriented Strand Boards (OSB) . Ed.1 1. Ed.Performance requirements Industrial trucks .Specification and testing Powered industrial trucks and tractors .Step splicing for multi-ply textilereinforced rubber covered conveyor belting Part 1: Hot-splicing method SANS 480:2006/ISO 11108:1996.01 Breaking strength and extension at break of textile fabrics: narrow strip method using constant rate of traverse Absorbent cotton lint 3 4 Concrete poles for telephone. 3 3. Ed. power and lighting purposes Rubber . IDT. IDT. 2 2 SANS 478:2007/EN 1493:1998.Temperatures. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 460:2009 (SABS 460) SANS 462:2005/ASTM A 974:1997. IDT. Ed. IDT. IDT. 3 1 SANS 477:2009/ISO 6292:2008.01 Code of practice for electricity metering SANS 475:2006 1 Luminaires for interior lighting. 1 1 SANS 473:2006/NRS 071:2004.Archival paper Requirements for permanence and durability Accelerated weathering of textiles .Overhead guards . IDT. 2 1 SANS 467:2005/EN 50148:1995.01 Plain-ended solid drawn copper tubes for potable water Welded wire fabric gabions and gabion mattresses (Metallic-coated or polyvinyl chloride (PVC) coated) Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive sparkignition engine fuel Quality management systems . 1 1 SANS 474:2009/NRS 057:2009.Definitions. classification and specifications Automated meter reading for large power users 1 SANS 472:2006/EN 300:1997. streetlighting and floodlighting . Ed. IDT. Ed. Ed.Gray-King coke test Intelligent Transport Systems .02 Protective and safety gum boots Part 1: Handmade rubber gum boots Protective and safety gum boots Part 2: Moulded rubber gum boots Protective and safety gum boots Part 3: Handmade rubber ankle boots for men Protective and safety gum boots Part 4: Moulded rubber ankle boots for men Steel refuse bins 3 1 1 2. extensible fabric bandages Timber preservative . MOD. nonadhesive.03 4. 1 1 SANS 506:2008 1 Page 24 . attachments and sprockets Hard coal .Step splicing for multi-ply textilereinforced rubber covered conveyor belting Part 2: Cold-splicing method Conveyor belting .Splicing of steel cord reinforced conveyor belting Good Manufacturing Practice in the animal feed industry Disinfectant alcohol-based handrub SANS 485:2009 1 SANS 489:2009 1 SANS 490:2008 1 SANS 491:1996 (SABS 491) SANS 492-1:2002 (SABS 492-1) SANS 492-2:2003 (SABS 492-2) SANS 492-3:1983 (SABS 492-3) SANS 492-4:1983 (SABS 492-4) SANS 493:2009 (SABS 493) SANS 494-1:2008 3 Wooden crutches 2. Ed. 3 1 SANS 501:2008/ISO 501:2003.Determination of caking power . IDT.Alkaline-copper-quaternary type SANS 499:2006/ISO 487:1998.Parameters for unidirectional air interface communication Specification for the elastic properties of flat.Determination of the crucible swelling number Coal . IDT.02 Glazed ceramic sanitaryware 1 Replacement of wheel rims for commercial vehicles and their trailers Steel roller chains.Standards available in electronic format (PDF) October 2009 SANS Number SANS 484-2:2009 Edition Title 1 Conveyor belting . 3 (SABS ISO 501) SANS 502:1982/ISO 502:1982.01 1 Surgical medical devices used for wound closure Part 1: Sterile sutures and ligatures Cotton duck SANS 495:2005 (SABS 495) SANS 497:2006 (SABS 497) SANS 498:2007 3. 2 (SABS ISO 502) SANS 504:2008 2 1 1 SANS 505:2003/BS 7505:1995.Radio-frequency identification of vehicles . Ed. types S and C. Ed. IDT. IDT. IDT. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 507-1:2007/NRS 034-1:2007.04 Immersion heaters for electric storage water heaters 3 Decorative paint for interior use 1 Coke (greater than 20 mm in size) . testing and examination of tower cranes Limes for use in building SANS 523:2007 (SABS 523) SANS 527-1:1993/ISO 527-1:1993.Determination of tensile properties Part 2: Test conditions for moulding and extrusion plastics Codes for the representation of names of languages Part 1: Alpha-2 code Codes for the representation of names of languages Part 2: Alpha-3 code Codes for the representation of names of languages Part 3: Alpha-3 code for comprehensive coverage of languages Codes for the representation of names of languages Part 5: Alpha-3 code for language families and groups Heat-resisting wiring cables 1 1 SANS 528-2:2007/ISO 639-2:1998. 1 2.Guidelines for the provision of electricity distribution networks in residential areas Part 1: Planning and design of distribution networks Concrete retaining blocks SANS 508:2008 1 SANS 509:2007/ISO 509:1996. 1 1 SANS 529:2007 (SABS 529) SANS 531:2007/ISO 4:1997. 1 1 SANS 528-5:2008/ISO 639-5:2006. Ed. 1 3. refrigerants and breathing gases SANS 532:2009 1 Page 25 . 2 1 Road vehicles .Rules for the abbreviation of title words and titles of publications Standard and specifications for industrial. Ed. IDT. Ed. IDT. 1 (SABS ISO 527-2) SANS 528-1:2007/ISO 639-1:2002.04 1 The inspection. Ed. IDT.04 3. 3 3 1 Information and documentation . food and beverage gases. 1 (SABS ISO 527-1) SANS 527-2:1993/ISO 527-2:1993. IDT. 1 1 Pallet trucks .02 1 Plastics . 1 1 SANS 528-3:2008/ISO 639-3:2007. Ed. IDT. Ed. Ed. propellant. IDT. IDT. medical. IDT. 4 Edition Title 1 Electricity distribution .Determination of mechanical strength Hospital beds and cots SANS 521:2009 (SABS 521) SANS 522:2007 3.Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid Retro-reflectors (reflex reflectors) SANS 513:2005 (SABS 513) SANS 514:2009 (SABS 514) SANS 515:2003 (SABS 515) SANS 520:2007/ISO 556:1980.Principal dimensions SANS 510:2007/ISO 6120:1995. Ed. Ed.Determination of tensile properties Part 1: General principles Plastics . Ed. Ed.5 kW Inflatable boats Part 2: Boats with a maximum motor power rating of 4. 1 1 SANS 537:2005 (SABS 537) SANS 540-1:2009 (SABS 540-1) SANS 540-2:2009 (SABS 540-2) SANS 541:2004 (SABS 541) SANS 542:2004 (SABS 542) SANS 543:2004 (SABS 543) SANS 545:2009 (SABS 545) SANS 547:2006/ISO 5173:2000. 1 1 SANS 554:1976/ISO 554:1976.01 1 SANS 553-1:2008/ISO 6185-1:2001.01 Wooden ladders Part 1: General requirements and methods of test Wooden ladders Part 2: Single and extension ladders Wooden ladders Part 3: Trestle and extension trestle ladders Wooden ladders Part 4: Step-ladders. Ed.01 Fibreboard products Part 1: Uncoated fibreboard 4. IDT. IDT.01 4.Whole of vehicle marking Part 1: Microdot systems Oven thermostats for electric stoves SANS 534-1:2008/VESA ABS/002:2008. Ed. platform ladders and shelf ladders Paint-rollers including handle-frames and refills 3. Ed.01 3.07 1 Shower enclosures for domestic purposes SANS 550-1:2003 (SABS 550-1) SANS 550-2:2005 (SABS 550-2) SANS 550-3:2005 (SABS 550-3) SANS 550-4:2005 (SABS 550-4) SANS 552:2003 3. MOD. Ed.Specifications Unused and reclaimed mineral insulating oils for transformers and switchgear SANS 553-2:2008/ISO 6185-2:2001.01 Fibreboard products Part 2: Coated fibreboard 3 Precast concrete paving slabs 4 Concrete roofing tiles 4 Fire hose reels (with semi-rigid hose) 3. 1 3.5 kW to 15 kW inclusive Inflatable boats Part 3: Boats with a maximum motor power rating of 15 kW and greater Standard atmospheres for conditioning and/or testing .04 Wooden doors 1 Destructive tests on welds in metallic materials Bend tests Cationic bitumen road emulsions SANS 548:2003 (SABS 548) SANS 549:2008 1. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Vehicle security . 1 1 Inflatable boats Part 1: Boats with a maximum motor power rating of 4. IDT.01 3. 1 (SABS ISO 554) SANS 555:2007 (SABS 555) 1 5 Page 26 . 1 1 SANS 553-3:2008/ISO 6185-3:2001. IDT. 04 1 Small craft .Limiting and indicating devices Part 2: Mobile cranes Coke .Textile-reinforced types for compressed-air applications . 2 3 Cast iron surface boxes and manhole and inspection covers and frames Vitrified clay sewer pipes and fittings 4. IDT. Ed. Ed.Permanently installed fuel systems and fixed fuel tanks Small craft . 2 1 SANS 562:1956 (SABS 562) SANS 563:2008/ISO 10134:2003. Ed. IDT. 2 2 SANS 567:2007/ISO 567:1995. Ed. Ed. 2 1 1 Small craft .Extra-low-voltage d.Liquefied petroleum gas (LPG) systems SANS 566:2009/ISO 10239:2008. IDT. IDT. Ed. IDT.Electrical systems . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 556-1:2004 Edition Title 1 Low-voltage switchgear Part 1: Circuit-breakers SANS 557:2008/ISO 10087:2006. installations Canned hake (Cape cod) SANS 561:2008/ISO 10133:2000.01 1 Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies Small craft . IDT. IDT.Specification Cranes . 3 1 Page 27 . Ed.01 1 Plastics hoses . 2 1 SANS 569:2007 1 Open-sided passenger vehicles SANS 570:2008 1 Directional stability performance of vehicles in the event of tyre failure Wooden handles for axes SANS 573:2008 (SABS 573) SANS 575:2008/ISO 5774:2006.c.Coding system SANS 558:1973 (SABS 558) SANS 559:2005 (SABS 559) SANS 560:2008/ISO 10088:2001.Lightning-protection systems Rubber insertion sheeting SANS 564:2007 (SABS 564) SANS 565:2003/BS 5651:1989. 3 1 Small craft . Ed. IDT.Determination of bulk density in a small container Small craft .Electrical devices . IDT. 1 1 SANS 579:2005/ISO 579:1999. Ed.Owner's manual SANS 568:2008/ISO 10240:2004.Determination of total moisture SANS 576:2008/ISO 1825:1996. 1 1. Ed.Craft identification . IDT. Ed. Ed. 3 2. 2 1 Coke .Specification Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling . 2 1 SANS 578-2:2008/ISO 10245-2:1994. IDT. and products derived therefrom Resin modified vinyl floor tiles SANS 585:1996 (SABS 585) SANS 585:2009 (SABS 585) SANS 586:2007 (SABS 586) SANS 587:2005 (SABS 587) SANS 588:2008 (SABS 588) SANS 589:2009/ISO 589:2008. 1 1 SANS 605:2007/ISO Guide 33:2000. 2 1 SANS 603:2007/ISO Guide 31:2000.Standards available in electronic format (PDF) October 2009 SANS Number SANS 580:2007 (SABS 580) SANS 581:2007 (SABS 581) SANS 584:2008 Edition Title 1. bound together) Wood preservative mixtures containing 1) high temperature creosote and coal tar or 2) low and medium temperature creosote and coal tar (SANS 592 and SANS 593.01 Sterilized sodium chloride and dextrose intravenous infusion Dynamometer testing for replacement brake lining assemblies and drum brake linings intended for vehicles of category M1. Ed.Contents of certificates and labels Calibration in analytical chemistry and use of certified reference materials Uses of certified reference materials 1 SANS 602:2007/ISO Guide 30:1992. frozen marine molluscs and frozen products derived therefrom The production of frozen fish. Ed. 2 1 Page 28 .01 5 Sterilized compound sodium lactate intravenous infusion (Ringer-lactate solution for injection) Sterilized dextrose intravenous infusion 5 5.02 Chloroprene rubber sheet (for waterproofing) 3. IDT. IDT. Ed.01 2 Canned fish. IDT. Ed. IDT. M2 and N1 Terms and definitions used in connection with reference materials Reference materials . marine molluscs.Determination of total moisture SANS 592 AND SANS 593:1957 (SABS 592 AND SANS 593) 1 Wood preservative mixtures containing 1) high temperature creosote and coal tar or 2) low and medium temperature creosote and coal tar (SANS 592 and SANS 593.02 Semi-flexible vinyl floor tiles 1 Soda-lime granules (with indicator) for use during anaesthesia for carbon dioxide absorption The production of frozen fish. IDT. canned marine molluscs and canned crustaceans and products derived therefrom Woollen overcoating 4 2 Hard coal . 2 1 SANS 604:2007/ISO Guide 32:1997. bound together) Sterilized sodium chloride intravenous infusion SANS 593 AND SANS 592:1957 (SABS 593 AND SANS 592) 1 SANS 595:2009 (SABS 595) SANS 597:2008 (SABS 597) SANS 598:2008 (SABS 598) SANS 599:2009 (SABS 599) SANS 601:2008 5. Ed. 4 2 3 3. 1 2.01 Clay roofing tiles 1. IDT.01 Page 29 .02 Gypsum cove cornice 1 Solid mineral fuels .01 3.Holdings statements . IDT. IDT.02 3. Ed.01 SANS 618:2009/ISO 10324:1997. 3 Edition Title 1 Short-pitch transmission precision roller and bush chains. Ed. testing and analysis Mechanical ball type couplings of diameter exceeding 50 mm Softwood flooring boards SANS 628:2008 1 SANS 629:2009 (SABS 629) SANS 630:2004 (SABS 630) SANS 631:2009 3. Ed. Ed.02 Castors for hospital equipment 2. IDT. 2 (SABS ISO 609) SANS 612:2007/BS 5970:2001. IDT.Vocabulary Part 2: Terms relating to sampling. 3 1 SANS 609:1996/ISO 609:1996.Standards available in electronic format (PDF) October 2009 SANS Number SANS 606:2006/ISO 606:2004.01 SANS 615-3:2009/ISO 10245-3:2008.02 Elastomeric structural glazing and panel gaskets 4 Disinfectants based on quaternary ammonium compounds Wood-wool panels (cement-bonded) 1. IDT. attachments and associated chain sprockets General requirements for the competence of reference material producers Reference materials .Summary level Emulsifiable cutting oil (light duty) SANS 607:2007/ISO Guide 34:2000.Limiting and indicating devices Part 3: Tower cranes Wood-preserving creosote mixtures and coal-tar mixtures Information and documentation . 2 1 SANS 608:2007/ISO Guide 35:2006. Ed. IDT. 1 1 SANS 619:2007 (SABS 619) SANS 621:2005 (SABS 621) SANS 622:2005 (SABS 622) SANS 626-2:2007/ISO 1213-2:1992.General and statistical principles for certification Solid mineral fuels . IDT. Ed. Ed. Ed.Mechanical performance criteria Cranes . 2 1 SANS 616:2008 1.01 Decorative high gloss enamel paints 1 Crocodiles in captivity SANS 632:2007 (SABS 632) SANS 635:2007 (SABS 635) SANS 636:2009 (SABS 636) SANS 637:2008 (SABS 637) 2.High temperature combustion method Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 °C to +870 °C Fenestration products .Determination of carbon and hydrogen . 3 1 1 SANS 613:2009 1. 04 Page 30 .01 Laundry detergent (for use in non-automatic domestic washing machines) Low-foam laundry detergent (for use in automatic and non-automatic domestic washing machines) Carbon paper (Metric units) 3 2. 1 (SABS ISO 647) SANS 648:1980 (SABS 648) SANS 650:2008 (SABS 650) SANS 651:2008 (SABS 651) SANS 652:2007 (SABS 652) SANS 656:2008 Edition Title 3 Food grade salt 3 Detergent-disinfectants based on quaternary ammonium compounds Flexible polyurethane (polyether) foams 2 1.01 Reconstituted flexible polyurethane foams 2.Determination of the yields of tar. water. Ed. adrenaline (epinephrine) and noradrenaline (norepinephrine) injection for dental use Classroom furniture 3. square and rectangular section for furniture Integrating-averaging sound level meters 1. 1 (SABS 638) SANS 639:2009 (SABS 639) SANS 640:2005 (SABS 640) SANS 641:2007 (SABS 641) SANS 642:2007 (SABS 642) SANS 643:2007 (SABS 643) SANS 644:1977 (SABS 644) SANS 647:1974/ISO 647:1974. Ed. IDT.01 Flexible polyurethane (polyester) foams 1. IDT.01 1 Sound level meters SANS 657-1:2005 (SABS 657-1) SANS 657-2:2004 (SABS 657-2) SANS 657-3:2005 (SABS 657-3) SANS 657-4:2004 (SABS 657-4) SANS 658:2008 3. oval.01 Lidocaine (lignocaine) hydrochloride.01 2 1.01 Steel tubes for non-pressure purposes Part 1: Sections for scaffolding.01 Disinfectants based on stabilized inorganic chlorine compounds Boot and shoe sizing and marking (Mondopoint system) Brown coals and lignites . general engineering and structural applications Steel tubes for non-pressure purposes Part 2: Steel tubes for cycles Steel tubes for non-pressure purposes Part 3: Steel tubes for rolls for conveyor belt idlers Steel tubes for non-pressure purposes Part 4: Steel tubes of round.Standards available in electronic format (PDF) October 2009 SANS Number SANS 638:2004/SADC HS 15:2004.01 1 SANS 659:2007 (SABS 659) SANS 660:2009 (SABS 660) 3. gas and coke residue by low temperature distillation Toilet paper 1 1 3 3. 01 Mixtures of copper-chromium-arsenic compounds for timber preservation Steel-reinforced spirally wound PE drainage and sewer pipes Zinc-coated fencing wire 1 SANS 675:2009 (SABS 675) SANS 676:2003 (SABS 676) SANS 677:2003 (SABS 677) SANS 678:2005 (SABS 678) SANS 680:2006 (SABS 680) SANS 681:2007 (SABS 681) SANS 682:2007 (SABS 682) SANS 685:2006 (SABS 685) SANS 687:2008 4 3.04 Screwing taps 5 Cast iron gate valves for waterworks 1 Wedge gate and resilient seal valves for waterworks Part 1: General Wedge gate and resilient seal valves for waterworks Part 2: Wedge gate valves Wedge gate and resilient seal valves for waterworks Part 3: Resilient seal valves Cast iron gate valves for general purposes SANS 664-2:2009 1 SANS 664-3:2009 1 SANS 665:2000 (SABS 665) SANS 665-2:2009 4.03 Reinforced concrete pressure pipes 3.03 Concrete non-pressure pipes 3 Primers for wood 3 Glazing putty for wooden and metal window frames 3.01 1 Wedge gate and resilient seal valves for general purposes Part 2: Wedge gate valves Wedge gate and resilient seal valves for general purposes Part 3: Resilient seal valves Ethanol-gel fuelled appliances SANS 665-3:2009 1 SANS 666:2008 1 SANS 672:2008 (SABS 672) SANS 673:2008 (SABS 673) SANS 674:2008 2.01 Wooden handles for hatchets 3.02 Undercoats for paints 3 Aluminium paint 5 Fibre-cement sheets (flat and profiled) 1 Inspection and testing of non-fixed load-lifting attachments Page 31 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 662:2009 (SABS 662) SANS 664:1999 (SABS 664) SANS 664-1:2009 Edition Title 1. 1 (SABS ISO 693) SANS 699:2009 2.01 Primary aluminium ingots for remelting 1 Printed side upper leather SANS 713:2007 (SABS 713) SANS 714:2009 2.Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation Page 32 . IDT. Ed. Ed. 2 1 Terminology work .Bibliographic references Part 2: Electronic documents or parts thereof Wooden handles for universal type picks SANS 690-2:2007/ISO 690-2:1997.02 Unsaturated polyester (UP) resin systems 1 Lining leather (chrome-tanned syntan-retanned side) SANS 717-1:1996/ISO 717-1:1996. Ed. IDT. IDT.Content. form and structure Information and documentation .01 Acid-cored solders 2. 2 (SABS ISO 717-1) 1 Acoustics .Principles and methods SANS 705:2009 1 Vegetable-tanned harness and bridle leathers SANS 706:2009 1 Leather welting SANS 708:2007 (SABS 708) SANS 709:2007 (SABS 709) SANS 710:2008 (SABS 710) SANS 711:2008 (SABS 711) SANS 712:2009 2.02 Refrigerated farm milk tanks 1. 2 1 Documentation .01 Aluminium cans for milk and cream 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 688:2008 Edition Title 1 Warp-knitted fabric for mosquito netting SANS 690:2007/ISO 690:1987. Ed. IDT. IDT. Ed. 1 1 SANS 692:2008 (SABS 692) SANS 693:1982/ISO 693:1982.Bibliographic references .01 1 Dimensions of seam welding wheel blanks 1 Side upper leather SANS 700:2009 1 Side upper leather (with a smooth corrected grain) SANS 701:2009 1 Cordovan and cordovan-type leathers for orthopaedic use Vegetable-tanned side leather for orthopaedic use SANS 702:2009 1 SANS 704:2004/ISO 704:2000. 2:2005. IDT.03 1 SANS 745-0:2008/AS/NZS 4357. Ed. Ed. Ed. 1 3. IDT.03 1 SANS 729:2008 1 SANS 731-1:2006 (SABS 731-1) SANS 731-2:2006 4 Road markings Part 1: Single-pack solvent-borne paints Road markings Part 2: Single-pack water-borne paints Boxboard (Metric units) 1. instrument. 1 1 Page 33 .03 2. IDT.Series of preferred numbers SANS 738-1:2008/ISO 5815-1:2003. 1 1 SANS 741:2006 (SABS 741) SANS 742:2008/ISO 3:1973. IDT. Ed. 1 1 SANS 740-2:2008/ISO 787-2:1981.02 Cathode copper 1 Coal . 1 1 SANS 745-3:2008/AS/NZS 4357.01 2.0:2005.3:2006. Ed. anaesthetists' dressing) Windows and doors made from rolled mild steel sections Automatic fire detection and alarm systems Part 8: Multi-point aspirated smoke detectors Live aquaculture abalone 3.01 3 2. IDT. IDT. 1 Edition Title 1 Acoustics . Ed. 1 2. Ed. 1 1 Structural laminated veneer lumber Part 0: Specifications Structural laminated veneer lumber Part 1: Method of test for measurement of dimensions and shape Structural laminated veneer lumber Part 2: Determination of structural properties . IDT.01 SANS 733:2008 (SABS 733) SANS 735:2009 (SABS 735) SANS 737:2009/ISO 10329:2009. IDT.Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation Electric welded low carbon steel pipes for aqueous fluids (large bore) The production of infants' and children's shoes (stuck-on and stitch-down construction) Medical trolleys (dressing/medicine. Ed.Determination of biochemical oxygen demand after "n" days (BODn) Part 1: Dilution and seeding method for allylthiourea addition General methods of test for pigments and extenders Part 2: Determination of matter volatile at 105 °C Industrial boots (including safety boots) with directvulcanized soles and heels Preferred numbers . IDT. Ed. IDT. Ed. 2 (SABS ISO 717-2) SANS 719:2008 (SABS 719) SANS 722:1982 (SABS 722) SANS 726:2003 (SABS 726) SANS 727:2003 (SABS 727) SANS 728-8:2009/AS 1603. 1 1 SANS 745-2:2008/AS/NZS 4357.1:2005.8:1996.Standards available in electronic format (PDF) October 2009 SANS Number SANS 717-2:1996/ISO 717-2:1996.Evaluation methods SANS 745-1:2008/AS/NZS 4357.Test methods Structural laminated veneer lumber Part 3: Determination of structural properties .Determination of plastic properties Constant-torque Gieseler plastometer method Water quality . Ed.03 3.01 Copper alloy gate valves . cross-arms and spacers for power distribution.07 Pine poles.03 Overbed tables 3. IDT.03 Road tar binders prepared from Lurgi-gasification crudes Interlock fabric 4.05 3. 1 2. Ed.01 Plumage fillings 1 Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation .02 3.05 Float valves 4.02 1. IDT.Guide Earth leakage protection units Part 1: Fixed earth leakage protection circuit-breakers Earth leakage protection units Part 2: Single-phase. cross-arms and spacers for power distribution and telephone systems Mineral-insulated metal-sheathed air-heating units for appliances Duplicator paper (metric units) 4. portable units Footwear laces SANS 767-1:1982 (SABS 767-1) SANS 767-2:1983 (SABS 767-2) SANS 770:2009 (SABS 770) SANS 776:2005 (SABS 776) SANS 777:2009 (SABS 777) SANS 778:2005 (SABS 778) SANS 779:1972 (SABS 779) 2 2 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 746:1976 (SABS 746) SANS 748:2002 (SABS 748) SANS 749:2003 (SABS 749) SANS 750:2007 (SABS 750) SANS 751:2008 (SABS 751) SANS 752:2007 (SABS 752) SANS 753:2009 (SABS 753) SANS 754:2007 (SABS 754) SANS 755:2006 (SABS 755) SANS 756:2008 (SABS 756) SANS 757:2004 (SABS 757) SANS 759:2008/ISO 1563:1990.03 Patients' trolleys 2 Invalid chairs Page 34 . telephone systems and street lighting Eucalyptus poles.01 5 Burglar-resistant safes 2.Heavy duty 3.05 2.03 Sheet steel furniture 1 Dental alginate impression material SANS 761:2008 (SABS 761) SANS 762:2008/BS 6657:2002. 2 Edition Title 2 Cast-iron pipes and pipe fittings for use above ground in drainage installations Road tar binders prepared from coke oven crudes 3. 02 Wheelbarrows 2.03 Writing equipment .02 Ophthalmic lenses 5.Standards available in electronic format (PDF) October 2009 SANS Number SANS 780:2009 (SABS 780) SANS 784:2008/AS/NZS 1428.4:2002.01 Page 35 .04 Bituminous aluminium paint 4.Tactile indicators SANS 785:2006 (SABS 785) SANS 786:2007 (SABS 786) SANS 787:2005 (SABS 787) SANS 791:2004 (SABS 791) SANS 794:2009 (SABS 794) SANS 795:2007 (SABS 795) SANS 802:2001 (SABS 802) SANS 803:2005 (SABS 803) SANS 804:2008 (SABS 804) SANS 804 TO 807 SET:1970 3.01 2.01 Unplasticized poly(vinyl chloride) (PVC-U) sewer and drain pipes and pipe fittings Aggregates of low density 2.Ballpoint pens 3.02 3.03 Fibre-cement boards 2.01 1 6.02 Clamps for wire ropes 3.SANS 806 and SANS 807 bound together) Unwrought tough pitch coppers: Tough pitch high conductivity copper Unwrought tough pitch coppers: Grade A tough pitch copper Unwrought tough pitch coppers: Grade B tough pitch copper Cable glands for use on flameproof enclosures (Ex d) Industrial body belts 2 SANS 805:1970 (SABS 805) SANS 806:2008 (SABS 806) SANS 807:2008 (SABS 807) SANS 808:1967 (SABS 808) SANS 809:2007 (SABS 809) SANS 813:2008 (SABS 813) SANS 814:2009 (SABS 814) SANS 815-1:2005 (SABS 815-1) 2 2.01 Unwrought tough pitch coppers: Electrolytic tough pitch high conductivity copper Unwrought tough pitch coppers (SANS 804.SANS 805.03 General purpose and aircraft hose clips (Worm-drive Type) Shoulder-ended and groove-ended piping systems Part 1: Shoulder-ended steel pipes. fittings and couplings 1. MOD Edition Title 4 Distribution transformers 1 Design for access and mobility .01 3.02 Flexible vinyl flooring 1. 1 1 SANS 857-2:2007/ISO 857-2:2005. Ed. IDT. IDT.Expression of users' requirements Part 2: Air purity requirements Building construction . 1 1 SANS 831-2:2009/ISO 6242-2:1992. Ed.01 Lime for soil stabilization 3 Hand dishwashing and light duty detergent (liquid) 1 Performance standards in building . 2 1 SANS 857-1:2004/ISO 857-1:1998. Ed. IDT. 1 1 SANS 832:2007/ISO 832:1994. IDT. 1 1 SANS 860:2008/ISO 860:2007.Rules for the abbreviation of bibliographic terms Welding and allied processes .02 Sizes of paper and envelopes 2. IDT.Harmonization of concepts and terms Dentistry . Ed. drainage and low-pressure irrigation Mild steel nails SANS 817:2007 (SABS 817) SANS 819:2006 (SABS 819) SANS 820:2006 (SABS 820) SANS 821:2007 (SABS 821) SANS 822:2007 (SABS 822) SANS 824:2006 (SABS 824) SANS 825:1993 (SABS 825) SANS 829:2009/ISO 6240:1980. couplings and fittings for sewerage.Expression of users' requirements Part 3: Acoustical requirements Information and documentation . Ed.Principles for their preparation and factors to be considered Building construction .03 Stainless steel cutlery Page 36 .01 3.Vocabulary Part 2: Soldering and brazing processes and related terms Terminology work . Ed. fittings and couplings Lidocaine (lignocaine) hydrochloride injection for dental use Fibre-cement pipes.03 3 3. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 815-2:2004 Edition Title 1 Shoulder-ended and groove-ended pipe systems Part 2: Groove-ended steel pipes. 3 1 SANS 862:2009 1 Set-top box decoder for free-to-air digital terrestrial television Ambulance stretchers SANS 865:2008 (SABS 865) SANS 866:2006 (SABS 866) 2. 1 1 SANS 831-3:2009/ISO 6242-3:1992.Vocabulary Part 1: Metal welding processes Welding and allied processes .Bibliographic description and references . 1 3. IDT.Contents and presentation Performance standards in building .01 WC flushing cisterns 1. Ed. IDT. 3 1 SANS 861:2008/ISO 1567:1999.Denture base polymers SANS 830:2009/ISO 6241:1984. Ed. IDT.02 2. 2 kV up to and including 36 kV Woven cotton tapes SANS 877:2007 (SABS 877) SANS 878:2004 (SABS 878) SANS 879:2009/DS 2403:2001. Ed. IDT. for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 1-3: Hazardous locations in underground mines Machines Compression-ignition engine systems and machines powered by such engine systems. for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 4: Nonhazardous locations in underground coal mines Boron timber preservatives SANS 868-1-2:2005 1 SANS 868-1-3:2005 1 SANS 868-4:2005 1.Polyurethane foam for load-bearing applications excluding carpet underlay . Ed. Ed. for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 1-2: Hazardous locations in underground mines Explosion protected engine systems Compression-ignition engine systems and machines powered by such engine systems.Specification Packaged meat products (processed or manufactured) Water quality . 2 2 3 Knitted tubular bandages 1 Cable terminations and live conductors within airfilled enclosures (insulation co-ordination) for rated a.Enumeration of micro-organisms in water samples .01 Ready-mixed concrete 1 Energy management . IDT.Specifications SANS 881:2009 1 Hard coal .01 SANS 871:2009 (SABS 871) SANS 873:2007 (SABS 873) SANS 876:2009/NRS 012:2009.Roga test Flexible cellular polymeric materials . IDT. for use in mines and plants with explosive gas atmospheres or explosive dust atmospheres or both Part 11:Hazardous locations in underground mines .Standards available in electronic format (PDF) October 2009 SANS Number SANS 868-1-1:2005 Edition Title 1 Compression-ignition engine systems and machines powered by such engine systems.Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement Varnish for interior use SANS 883:2009/ISO 5999:2007. voltages from 7. 1 3 4. 1 1 SANS 885:2003 (SABS 885) SANS 886:2009/BS 8496:2007. Ed. IDT. 1 2 1 SANS 887:2005 (SABS 887) SANS 888:2008 (SABS 888) 3 3.Determination of caking power .c.01 Interlining Page 37 .Basic explosion protected engines Compression-ignition engine systems and machines powered by such engine systems. 03 Stainless steel wash-hand basins and wash troughs 2.01 2.01 3.01 3.60:2008.02 Soiled linen carriers 2.02 General purpose detergent (beads.Standards available in electronic format (PDF) October 2009 SANS Number SANS 890-1:2007 (SABS 890-1) SANS 890-2:2006 (SABS 890-2) SANS 891:2006 (SABS 891) SANS 892:2003 (SABS 892) SANS 894:2009/SEE NOTE IN STAGE 55.02 Ballasts for fluorescent lamps Part 1: Ballasts for lamps for operation with starters (class A lamps) Ballasts for fluorescent lamps Part 2: Ballasts for lamps for operation without starters (class B lamps) Reference ballasts for class B fluorescent lamps 3.01 3 Hessian cloth 3 Aluminium alloy corrugated and troughed sheets 2.02 Natural fibre ropes 3 Springspikes for light rails 3 Fishplates for light rails 3 Coach screws for light rails 3 Fishbolts and nuts for light rails 3 Dogspikes for light rails Page 38 .01 Stainless steel sinks for institutional use 3.04 Wheeled bed screens 3 Insecticidal space sprays in pressurized aerosol dispensers Paint and varnish brushes (flat type) 3. 2 SANS 895:2008 (SABS 895) SANS 896:2003 (SABS 896) SANS 897:2008 (SABS 897) SANS 899:1987 (SABS 899) SANS 901:2009 (SABS 901) SANS 902:2007 (SABS 902) SANS 903:1978 (SABS 903) SANS 906:2006 (SABS 906) SANS 907:2009 (SABS 907) SANS 911:2004 (SABS 911) SANS 913:2007 (SABS 913) SANS 914:2007 (SABS 914) SANS 915:2007 (SABS 915) SANS 916:2007 (SABS 916) SANS 917:2007 (SABS 917) Edition Title 1. Ed. granules and powders) Test Specifications for SD and HD Level Integrated Receiver Decoders Gas cylinder trolleys 1 2. IDT. 03 2.02 Orthopaedic tubular knitted fabric 3.01 Emulsion roof paint 2.04 Polished twines 2.07 3 Processed cotton duck (560 g) 2. and maids' school shoes with direct injection-moulded soles and heels Man-made fibre ropes 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 920:2005 (SABS 920) SANS 921:2009 (SABS 921) SANS 924:2003 (SABS 924) SANS 925:2006 (SABS 925) SANS 927:2007 (SABS 927) SANS 928:2009/ISO 10241:1992.02 Unpolished twines 1.02 Spheroidal graphite iron castings 1 Spheriodal graphite iron castings and austenitic spheroidal graphite iron castings Austenitic spheroidal graphite iron castings 1.01 Pitch-impregnated fibre pipes and fittings and jointing Stainless steel stall urinals 3 3.02 1 Austenitic spheroidal graphite iron castings 1.02 Corrugated board containers for the export of citrus fruit Hot-dip (galvanized) zinc coatings on steel wire 2.04 Support and compression bandages Part 1: Woven crêpe bandages Support and compression bandages Part 2: Warpknitted bandages 2 Page 39 . 1 Edition Title 2.01 Precast concrete kerbs. IDT. youths'. edgings and channels 1 International terminology standards . Ed.02 Steel bars for concrete reinforcement 3.01 1.04 Children's.Preparation and layout Plywood and composite board SANS 929:2008 (SABS 929) SANS 930:2006 (SABS 930) SANS 933:2007 (SABS 933) SANS 935:2007 (SABS 935) SANS 936:2008 (SABS 936) SANS 936 AND SANS 937:1969 (SABS 936 AND SANS 937) SANS 937:2008 (SABS 937) SANS 937 AND SANS 936:1969 (SABS 937 AND SANS 936) SANS 938:2003 (SABS 938) SANS 939:2008 (SABS 939) SANS 940:2005 (SABS 940) SANS 942:2009 (SABS 942) SANS 943:2008 (SABS 943) SANS 945-1:2006 (SABS 945-1) SANS 945-2:2002 (SABS 945-2) 2. IDT. Ed.and waterproofing in buildings Storage of firearms and ammunition Part 1: Safes 1.01 3.01 1 SANS 956-2:2009/ISO 20022-2:2007. transformer type) Lidocaine (lignocaine) hydrochloride and adrenaline (epinephrine) injection for dental use Financial services .02 Indoor venetian blinds 2. IDT. 2 1 ARP 956-3:2009/ISO/TS 20022-3:2004. 1 Edition Title 1. 1 1 SANS 957:2009/ISO 6310:2001.01 2 Polyolefin film for damp.UNIversal Financial Industry message scheme Part 1: Overall methodology and format specifications for inputs to and outputs from the ISO 20022 Repository Financial services .UNIversal Financial Industry message scheme Part 3: ISO 20022 modelling guidelines Financial services . 2 1 SANS 960:2005 (SABS SM 960) SANS 962-1:2009 (SABS 962-1) SANS 962-2:2006 (SABS 962-2) SANS 964:2008 (SABS 964) SANS 965:2008 (SABS 965) 4 2.Brake linings .Compressive strain test method Textiles .Standards available in electronic format (PDF) October 2009 SANS Number SANS 947:2007 (SABS 947) SANS 949:2005 (SABS 949) SANS 950:2008 (SABS 950) SANS 951:2007 (SABS 951) SANS 952:1985 (SABS 952) SANS 953-1:2008 (SABS 953-1) SANS 953-2:2003 (SABS 953-2) SANS 954:2004 (SABS 954) SANS 955:2007 (SABS 955) SANS 956-1:2009/ISO 20022-1:2004.02 Strongroom and vault doors 2. Ed. IDT. IDT. IDT.UNIversal Financial Industry message scheme Part 2: Roles and responsibilities of the registration bodies Financial services .Dimensional stability during washing and drying procedures Mechanical fasteners for conveyor belts Part 1: Plate-and-bolt type fasteners Mechanical fasteners for conveyor belts Part 2: Hinged type and plate-and-rivet type fasteners Solas life-jackets 1. Ed. Ed.UNIversal Financial Industry message scheme Part 4: ISO/TS 20022 XML design rules Financial services .UNIversal Financial Industry message scheme Part 5: ISO 20022 reverse engineering Road vehicles .01 Storage of firearms and ammunition Part 2: Strongrooms Metal-arc welding equipment (non-automatic.01 1.01 1.01 3. singleoperator.02 Unplasticized polyvinyl chloride rigid conduit and fittings for use in electrical installations Fire-resistant record protection equipment 3. 1 1 ARP 956-4:2009/ISO/TS 20022-4:2004. Ed. IDT.02 2. Ed. 1 1 ARP 956-5:2009/ISO/TS 20022-5:2004.04 Welded austenitic stainless steel tubes Page 40 . 01 1 2 Textile tolerances 2.02 2.03 2.01 1. sewer and drainage systems Rubber joint rings (non-cellular) Part 2: Joint rings for use in the dairy industry Rubber joint rings (non-cellular) Part 3: Joint rings for use in pressure cookers Prestressed concrete pipes 1.03 3 2.03 High-pressure down-draught steam sterilizers (autoclaves) (with independent steam supply) High-pressure high-vacuum steam sterilizers (autoclaves) Polyester-and-wool uniform fabrics 3. NEQ (SABS 974-1) SANS 974-2:2007 (SABS 974-2) SANS 974-3:2009 (SABS 974-3) SANS 975:1970 (SABS 975) SANS 977:2003 (SABS 977) SANS 981:2009 (SABS 981) SANS 982:2009 (SABS 982) SANS 985:2008 (SABS 985) SANS 986:2006 (SABS 986) SANS 990-1:2008 Edition Title 3.02 Page 41 .04 Components of pressure pipe systems Part 1: Unplasticized poly(vinyl chloride) (PVC-U) pressure pipe systems Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems Unplasticized poly(vinyl chloride) (PVC-U) soil.01 3.03 3.05 2.01 Precast reinforced concrete culverts 1 Business process outsourcing and offshoring operations Part 1: Outbound contact centre operations Business process outsourcing and offshoring operations Part 2: Inbound contact centre operations Business process outsourcing and offshoring operations Part 3: Back-office processing operations Aluminium and aluminium alloy sand castings and gravity die castings Aluminium and aluminium alloy pressure die castings SANS 990-2:2008 1 SANS 990-3:2008 1 SANS 991:2008 (SABS 991) SANS 992:2008 (SABS 992) 2.03 2 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 966-1:2008 (SABS 966-1) SANS 966-2:2008 (SABS 966-2) SANS 967:2004 (SABS 967) SANS 971:2003 (SABS 971) SANS 972-1:2005 (SABS 972-1) SANS 972-2:2004 (SABS 972-2) SANS 974-1:1986/ISO 4633:1983. waste and vent pipes and pipe fittings Fire-retardant textile-reinforced conveyor belting (for use in fiery mines) Signs for street and property identification Part 1: Retro-reflective signs Signs for street and property identification Part 2: Non-retro-reflective signs Rubber joint rings (non-cellular) Part 1: Joint rings for use in water. 01 Bunting 1.Low-voltage cables and flexible earthing straps for motor vehicles Electric cables for motor vehicles .03 Electric light dimmers (Metric units) 1 Coke .03 1.01 Fine china and vitrified tableware for domestic use 2.01 Anodized coatings on aluminium (for architectural applications) Semi-vitreous crockery (domestic ware) 1. and marking of grinding wheels 1. sizes.03 Semi-vitreous crockery (hotel ware) 2. currents and insulation levels for electricity supply Power-operated dispensing devices for flammable liquid fuels 1.04 Electric cables for motor vehicles .Determination of true relative density.01 Fine china and vitrified tableware for non-domestic use Innerspring mattresses 2.03 2.05 1.02 Plastic floats for ball valves 2. 2 (SABS ISO 1014) SANS 1015:2008 (SABS 1015) SANS 1017:2008 (SABS 1017) SANS 1018:2007 (SABS 1018) SANS 1019:2008 (SABS 1019) SANS 1020:2003 (SABS 1020) Edition Title 1 Modular co-ordination in building 2 Chamois leathers 3.Ignition cables for motor vehicles Standard voltages.Standards available in electronic format (PDF) October 2009 SANS Number SANS 993:1972 (SABS 993) SANS 995:1990 (SABS 995) SANS 996:2008 (SABS 996) SANS 998:2006 (SABS 998) SANS 999:2007 (SABS 999) SANS 1001:2004 (SABS 1001) SANS 1002:2006 (SABS 1002) SANS 1003:2006 (SABS 1003) SANS 1004:2006 (SABS 1004) SANS 1005:2009 (SABS 1005) SANS 1006:2007 (SABS 1006) SANS 1008:2007 (SABS 1008) SANS 1010:2007 (SABS 1010) SANS 1011:2007 (SABS 1011) SANS 1012:2006 (SABS 1012) SANS 1014:1985/ISO 1014:1985. apparent relative density and porosity Fire resisting door units for record rooms 1.05 2 Page 42 .02 1.01 Warp-knitted pocketing 3. IDT. Ed.02 Shapes.02 Stainless steelware for domestic and general use 3.01 Car radio receivers 1. 01 Welded steel fabric for reinforcement of concrete 1. 3 Edition Title 3.02 Miniature substations 2 Detergent-disinfectants based on stabilized inorganic chlorine compounds Solid filler wire for the submerged arc welding of mild steel and medium high tensile steel (metric units) Grey iron castings 1. Ed. MOD.01 1 Rubber.03 1.Determination of adhesion to textile fabric Standard transformer bushings SANS 1037:2008 (SABS 1037) SANS 1038:2007 (SABS 1038) SANS 1039:2008 (SABS 1039) SANS 1040:2004 (SABS 1040) SANS 1041:2004 (SABS 1041) SANS 1042:2006 (SABS 1042) SANS 1043:1985 (SABS 1043) SANS 1044:2009 (SABS 1044) SANS 1046:1990/76/756/EEC:1976. MOD.01 Tubular fluorescent lamps for general service 1. IDT. ECE R48:1983.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1021:2007 (SABS 1021) SANS 1022:2009 (SABS 1022) SANS 1024:2006 (SABS 1024) SANS 1026:2008 (SABS 1026) SANS 1027:2008 (SABS 1027) SANS 1028:2008 (SABS 1028) SANS 1029:2008 (SABS 1029) SANS 1032:2001 (SABS 1032) SANS 1033:2003 (SABS 1033) SANS 1034:2008 (SABS 1034) SANS 1036:2004/ISO 36:1999.05 Polymer floor dressings 2 The manufacture of sanitary towels 3 Industrial laundry detergents 3 Motor vehicle safety: Lights and light-signalling devices installed on motor vehicles and trailers Page 43 .01 Cotton eyelet fabric 1.03 2.01 Woodworkers' vices 1. vulcanized or thermoplastic . 82/244/EEC:1982. 83/276/EEC:1983. MOD. 89/278/EEC:1989. MOD. 80/233/EEC:1980.01 Metal roofing tiles 2.01 Water taps (plastic bodies) 2. MOD.03 Wooden ceiling and panelling boards 2.02 Pressure cookers for domestic use 2. MOD (SABS 1046) 1.03 Bench vices for metal work (Metric units) 1.01 Pipe wrenches (Metric units) 2. 84/8/EEC:1984. MOD. couplers and connections 2.01 Ball valves Part 2: Heavy duty valves (not fire-safe) 2. wires. MOD. MOD (SABS SV 1051-1) SANS 1051-2:2006/ECE R13:1980. with modifications) Braking Part 1: General 2. MOD (SABS SV 1051-3) SANS 1051-4:2006/ECE R13:1980. MOD.01 Braking Part 5: Parking brakes: Mechanically locked brake cylinder (lock actuator) type Braking Part 6: Distribution of braking effort and compatibility of vehicles in combination Rear underrun protection devices 1.04 Concrete paving blocks 1. Ed.03 2 Welding consumables . MOD (SABS SV 1051-5) SANS 1051-6:2006/ECE R13:1980.01 1. 1 (SABS 1047) SANS 1051-1:2006/ECE R13:1980. 2 (SABS ISO 1071) SANS 1077:2009 (SABS 1077) Edition Title 2.01 Braking Part 4: Spring brakes 2.01 2. rods and tubular cored electrodes for fusion welding of cast iron .01 Braking Part 2: Response time of braking devices on vehicles fitted with compressed-air braking devices Braking Part 3: Energy sources and reservoirs 2. Ed. Ed. 1. IDT. MOD (SABS SV 1051-2) SANS 1051-3:2006/ECE R13:1980. MOD (SABS SV 1051-6) SANS 1055:2007 (SABS 1055) SANS 1056-1:2008 (SABS 1056-1) SANS 1056-2:2006 (SABS 1056-2) SANS 1056-3:2009 (SABS 1056-3) SANS 1058:2006 (SABS 1058) SANS 1060:2003 (SABS 1060) SANS 1062:1985 (SABS 1062) SANS 1063:2008 (SABS 1063) SANS 1067-1:2005 (SABS 1067-1) SANS 1067-2:2005 (SABS 1067-2) SANS 1068:2008 (SABS 1068) SANS 1071:2005/ISO 1071:2003.Classification Sealing compounds for the building and construction industry.02 Ball valves Part 3: Light duty valves (not fire-safe) 1.02 Wheelchairs (folding type) 1 Pressure and vacuum gauges 3 Earth rods. 78/632/EEC:1978. unlined) 2.01 1.03 Ballvalves Part 1: Fire-safe valves 2.Covered electrodes. MOD (SABS SV 1051-4) SANS 1051-5:2006/ECE R13:1980.01 Copper-based fittings for copper tubes Part 1: Compression fittings Copper-based fittings for copper tubes Part 2: Capillary solder fittings Coats and jackets (protective.02 Motor vehicle safety specification: Interior fittings (passenger cars) (Incorporating EEC Directive 74/60 "Interior fittings of motor vehicles" and the amending EEC Directive 78/632. two-component.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1047:2006/74/60/EEC:1974.02 Page 44 .01 2. polyurethane-base 1.01 2. 82/319/EEC:1982. IDT. 2 (SABS 1109-2) SANS 1110:2008 (SABS 1110) SANS 1111:2008 (SABS 1111) SANS 1112:2008 (SABS 1112) SANS 1113:2006 (SABS 1113) Edition Title 1.Fine aggregates for plaster and mortar National colour standard 2 3. MOD.07 1. Ed. box.03 Glass test tubes 3 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions. tolerances and designation Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges Screwdrivers for slotted-head screws 3 1.02 Aggregates from natural sources .02 Aggregates from natural sources .Strip method using constant rate of load Dimensional changes in textile fabrics caused by immersion in cold water Hardwood furniture timber 4 1.05 1. IDT.01 Breaking strength and extension at break of textile fabrics . and combination wrenches 1.01 Hand-operated.01 Industrial laminated sheets based on phenolic resin 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1080:2002/77/541/EEC:1977. 81/576/EEC:1981. 3 (SABS 1109-1) SANS 1109-2:2005/ISO 7-2:2000.Aggregates for concrete Wall outlet boxes for the enclosure of electrical accessories Flexible poly(vinyl chloride) (PVC) pressure hose 3.01 Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements) Detergent-disinfectants based on iodophors 2 2 Detergent-disinfectants based on phenolics 2. Ed.03 1.01 1. MOD.01 1.05 Coal-burning appliances (reduced smoke emission type) Open-end. square-drive socket wrenches Page 45 . MOD (SABS 1080) SANS 1081:2001 (SABS 1081) SANS 1082:2001 (SABS 1082) SANS 1083:2006 (SABS 1083) SANS 1085:2004 (SABS 1085) SANS 1086:2007 (SABS 1086) SANS 1088:2004 (SABS 1088) SANS 1090:2009 (SABS 1090) SANS 1091:2004 (SABS 1091) SANS 1092:2007 (SABS SM 92) SANS 1097:2005 (SABS SM 97) SANS 1099:2008 (SABS 1099) SANS 1100:2009 (SABS 1100) SANS 1108:2005 (SABS 1108) SANS 1109-1:2005/ISO 7-1:1994.02 Luminaire entries and spigots 2. 02 3.03 School clothing Part 6: Dresses.03 School clothing Part 7: Girls' slacks and skirts 1.04 School clothing Part 13: Athletic wear 2.04 1.03 School clothing Part 12: Tracksuits 1.02 School clothing Part 4: Shirts 3.02 2.01 Pliers and nippers Page 46 .02 3 Retro-reflective number plates for motor vehicles Part 1: Blank plates (aluminium) Retro-reflective number plates for motor vehicles Part 2: Metal Retro-reflective number plates for motor vehicles Part 2: Number plates (aluminium) Retro-reflective number plates for motor vehicles Part 3: Blank plates (plastics) Retro-reflective number plates for motor vehicles Part 4: Number plates (plastics) Retro-reflective number plates for motor vehicles Part 4: Plastics Plastics wrappings for the protection of steel pipelines School clothing Part 1: General requirements for school clothing School clothing Part 2: Blazers 3 5 3 5 3 1.03 School clothing Part 9: Knee-high stockings and ankle socks School clothing Part 10: Jerseys and cardigans 1.04 3.04 School clothing Part 11: Briefs 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1114:2006 (SABS 1114) SANS 1115:2007 (SABS 1115) SANS 1116-1:2008 (SABS 1116-1) SANS 1116-2:2003 (SABS 1116-2) SANS 1116-2:2008 (SABS 1116-2) SANS 1116-3:2008 (SABS 1116-3) SANS 1116-4:2008 (SABS 1116-4) SANS 1116-4:2003 (SABS 1116-4) SANS 1117:2007 (SABS 1117) SANS 1118-1:2003 (SABS 1118-1) SANS 1118-2:2004 (SABS 1118-2) SANS 1118-3:2008 (SABS 1118-3) SANS 1118-4:2008 (SABS 1118-4) SANS 1118-6:2008 (SABS 1118-6) SANS 1118-7:2008 (SABS 1118-7) SANS 1118-9:2008 (SABS 1118-9) SANS 1118-10:2008 (SABS 1118-10) SANS 1118-11:2008 (SABS 1118-11) SANS 1118-12:2008 (SABS 1118-12) SANS 1118-13:2008 (SABS 1118-13) SANS 1120:2008 (SABS 1120) Edition Title 3.03 Industrial boots (including safety boots) with stuckon pre-moulded or direct-injection-moulded soles and heels Cast iron gratings for gullies and stormwater drains 1.03 School clothing Part 3: Trousers and shorts 3. tunics and gyms 3. 04 Fibre reinforcing material for pipe wrapping 2 Rubber.and countersunk-head bolts and nuts SANS 1133:2008/ISO 1133:2005.01 2 Hydraulic trolley jacks 2. Ed.01 1. 4 (SABS ISO 1133) SANS 1142:1979 (SABS 1142) SANS 1143:2008 (SABS 1143) SANS 1144:2007 (SABS 1144) SANS 1145:2007 (SABS 1145) SANS 1147:2001 (SABS 1147) SANS 1148:2008 (SABS 1148) SANS 1150:2007 (SABS 1150) SANS 1151:2005 (SABS 1151) SANS 1152:2008 (SABS 1152) 2 1 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1123:2007 (SABS 1123) SANS 1124-1:1998 (SABS 1124-1) SANS 1124-2:1998 (SABS 1124-2) SANS 1125:2004 (SABS 1125) SANS 1126:2007 (SABS 1126) SANS 1127:2007 (SABS 1127) SANS 1128-1:2008 (SABS 1128-1) SANS 1128-2:2008 (SABS 1128-2) SANS 1129:2008 (SABS 1129) SANS 1130:2008 (SABS 1130) SANS 1132:2009/ISO 132:2005. 4 Edition Title 3.04 1. IDT.01 Wooden safety matches 2.01 Castor and icing sugars for household and confectionery use Leather school bags and school brief-cases 1.01 Pipe flanges 3 Syringes and needles (sterile-packed for single use) Part 1: Injection needles Syringes and needles (sterile-packed for single use) Part 2: Syringes Room air conditioners and heat pumps 3 2. connectors and branch pipe and nozzle connections Steel door frames 2 1.Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics Diesel engines modified for use in hazardous locations (other than in mines) Mushroom.03 Glass-reinforced polyester (GRP) laminated sheets (profiled or flat) Portable rechargeable fire extinguishers Halogenated hydrocarbon type extinguishers Metal-working chisels for hand use 3. IDT.03 Page 47 .Determination of flex cracking and crack growth (De Mattia) Plastics .01 1. vulcanized or thermoplastic .03 2 Mechanical jacks 2 Algaecides for use in freshwater swimming pools 2 Firefighting equipment Part 1: Components of underground and above-ground hydrant systems Firefighting equipment Part 2: Hose couplings. Ed. 03 3.01 1.03 Linear alkylbenzenesulphonic acid 2.01 Bains-marie and hot cupboards 1.02 The production of lined and coated steel pipes using bitumen or coal tar enamel Wet blue chrome-tanned hides 1 1.02 Metal screws for wood 1.01 Nurses' woven uniform fabric (polyester-and-cotton) Page 48 .03 Light gauge welded steel pipes 2.02 Hose for liquefied petroleum gas (LPG) Part 1: Hose used in road and rail transport Hose for liquefied petroleum gas (LPG) Part 2: Hose and tubing for use in LPG vapour phase and LPG-air installations The production of pre-cooked frozen foods containing protein Detergent for domestic dishwashing machines 1.01 General purpose textile-reinforced conveyor belting 2.03 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1156-1:2007 (SABS 1156-1) SANS 1156-2:2007 (SABS 1156-2) SANS 1159:2003 (SABS 1159) SANS 1163:1977 (SABS 1163) SANS 1166:2006 (SABS 1166) SANS 1167:2006 (SABS 1167) SANS 1168:2006 (SABS 1168) SANS 1169:2008 (SABS 1169) SANS 1170:2008 (SABS 1170) SANS 1171:2006 (SABS 1171) SANS 1172:2008 (SABS 1172) SANS 1173:2006 (SABS 1173) SANS 1174:2005 (SABS 1174) SANS 1175:2008 (SABS 1175) SANS 1176:1994 (SABS 1176) SANS 1177:2007 (SABS 1177) SANS 1178:2002 (SABS 1178) SANS 1179:1977 (SABS 1179) SANS 1182:2009 (SABS 1182) SANS 1183:2008 (SABS 1183) Edition Title 1.01 High speed steel slitting saws 2 Self-supporting plastics containers of nominal capacities 5 l to 220 l Terry jacquard articles 2 1.02 2 1 2 Syringes with or without needles for the injection of insulin (sterile-packed for single use) Industrial shoes (including safety shoes) with stuckon pre-moulded or direct-injection-moulded soles and heels Industrial shoes (including safety shoes) with directvulcanized soles and heels Temporary stands 3.04 Files and rasps 2. 01 1 Production of single-use hypodermic needles (sterile-packed) for dental cartridge syringes Malleable iron castings 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1186-1:2008 (SABS 1186-1) SANS 1186-2:2007 (SABS 1186-2) SANS 1186-3:2004 (SABS 1186-3) SANS 1186-4:2008 (SABS 1186-4) SANS 1186-5:2006 (SABS 1186-5) SANS 1187:2008 (SABS 1187) SANS 1188:1978 (SABS 1188) SANS 1190:2009 (SABS 1190) SANS 1191:2005 (SABS 1191) SANS 1192:2005 (SABS 1192) SANS 1193:2008 (SABS 1193) SANS 1194:2006 (SABS 1194) SANS 1195:2008 (SABS 1195) SANS 1196:2009 (SABS 1196) SANS 1198:2005 (SABS 1198) SANS 1199:2007 (SABS 1199) SANS 1200 A:1986 (SABS 1200 A) SANS 1200 AA:1986 (SABS 1200 AA) SANS 1200 AB:1986 (SABS 1200 AB) SANS 1200 AD:1986 (SABS 1200 AD) SANS 1200 AH:1986 (SABS 1200 AH) Edition Title 3.02 1.02 1.03 Symbolic safety signs Part 5: Photoluminescent signs Tanks and ancillary equipment for milk tankers 2.02 1.01 1.02 The production of mageu 3 Standardized specification for civil engineering construction Section A: General Standardized specification for civil engineering construction Section AA: General (small works) Standardized specification for civil engineering construction Section AB: Engineer's office Standardized specification for civil engineering construction Section AD: General (Small dams) Standardized specification for civil engineering construction Section AH: General (structural) 3 3 2 3 Page 49 .03 2 Toughened safety glass for vehicles 2 Nylon tubing for air-brake applications 1.05 Symbolic safety signs Part 1: Standard signs and general requirements Symbolic safety signs Part 2: Self-luminous (radioluminescent) signs Symbolic safety signs Part 3: Internally illuminated signs Symbolic safety signs Part 4: Retro-reflective signs 1.02 Busbars 3 Detergent-disinfectants based on organic halogen compounds (other than iodine compounds) The manufacture of rubber sheeting for rubber lining 2 2.05 High penetration-resistant laminated safety glass for vehicles Laminated safety glass for vehicles 1. subgrade) Standardized specification for civil engineering construction Section DN: Earthworks (railway sidings) Standardized specification for civil engineering construction Section F: Piling Standardized specification for civil engineering construction Section G: Concrete (structural) Standardized specification for civil engineering construction Section GA: Concrete (small works) Standardized specification for civil engineering construction Section GB: Concrete (ordinary buildings) Standardized specification for civil engineering construction Section GE: Precast concrete (structural) Standardized specification for civil engineering construction Section GF: Prestressed concrete Standardized specification for civil engineering construction Section H: Structural steelwork Standardized specification for civil engineering construction Section HA: Structural steelwork (sundry items) Standardized specification for civil engineering construction Section HB: Cladding and sheeting Standardized specification for civil engineering construction Section HC: Corrosion protection of structural steelwork Standardized specification for civil engineering construction Section HE: Structural aluminiumwork Standardized specification for civil engineering construction Section L: Medium-pressure pipe lines 3 3 3 1 3 1 2 1 1 2 1 1 1 3 2 1 1 1 2 Page 50 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 1200 C:1980 (SABS 1200 C) SANS 1200 D:1988 (SABS 1200 D) SANS 1200 DA:1988 (SABS 1200 DA) SANS 1200 DB:1989 (SABS 1200 DB) SANS 1200 DE:1984 (SABS 1200 DE) SANS 1200 DK:1996 (SABS 1200 DK) SANS 1200 DM:1981 (SABS 1200 DM) SANS 1200 DN:1982 (SABS 1200 DN) SANS 1200 F:1983 (SABS 1200 F) SANS 1200 G:1982 (SABS 1200 G) SANS 1200 GA:1982 (SABS 1200 GA) SANS 1200 GB:1984 (SABS 1200 GB) SANS 1200 GE:1984 (SABS 1200 GE) SANS 1200 GF:1984 (SABS 1200 GF) SANS 1200 H:1990 (SABS 1200 H) SANS 1200 HA:1990 (SABS 1200 HA) SANS 1200 HB:1985 (SABS 1200 HB) SANS 1200 HC:1988 (SABS 1200 HC) SANS 1200 HE:1983 (SABS 1200 HE) SANS 1200 L:1983 (SABS 1200 L) Edition Title 1 Standardized specification for civil engineering construction Section C: Site clearance Standardized specification for civil engineering construction Section D: Earthworks Standardized specification for civil engineering construction Section DA: Earthworks (small works) Standardized specification for civil engineering construction Section DB: Earthworks (pipe trenches) Standardized specification for civil engineering construcion Section DE: Small earth dams Standardized specification for civil engineering construction Section DK: Gabions and pitching Standardized specification for civil engineering construction Section DM: Earthworks (roads. 01 Pipe holderbats Page 51 . MOD. MOD.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1200 LB:1983 (SABS 1200 LB) SANS 1200 LC:1981 (SABS 1200 LC) SANS 1200 LD:1982 (SABS 1200 LD) SANS 1200 LE:1982 (SABS 1200 LE) SANS 1200 LF:1983 (SABS 1200 LF) SANS 1200 LG:1983 (SABS 1200 LG) SANS 1200 M:1996 (SABS 1200 M) SANS 1200 ME:1981 (SABS 1200 ME) SANS 1200 MFL:1996 (SABS 1200 MFL) SANS 1200 MF:1981 (SABS 1200 MF) SANS 1200 MG:1996 (SABS 1200 MG) SANS 1200 MH:1996 (SABS 1200 MH) SANS 1200 MJ:1984 (SABS 1200 MJ) SANS 1200 MK:1983 (SABS 1200 MK) SANS 1200 MM:1984 (SABS 1200 MM) SANS 1200 NB:1981 (SABS 1200 NB) SANS 1201:2005 Edition Title 2 Standardized specification for civil engineering construction Section LB: Bedding (pipes) Standardized specification for civil engineering construction Section LC: Cable ducts Standardized specification for civil engineering construction Section LD: Sewers Standardized specification for civil engineering construction Section LE: Stormwater drainage Standardized specification for civil engineering construction Section LF: Erf connections (water) Standardized specification for civil engineering construction Section LG: Pipe jacking Standardized specifications for civil engineering construction Section M: Roads (general) Standardized specification for civil engineering construction Section ME: Subbase Standardized specification for civil engineering construction Section MFL: Base (light pavement structures) Standardized specification for civil engineering construction Section MF: Base Civil engineering construction Section MG: Bituminous surface treatment Civil engineering construction Section MH: Asphalt base and surfacing Standardized specification for civil engineering construction Section MJ: Segmented paving Standardized specification for civil engineering construction Section MK: Kerbing and channelling Standardized specification for civil engineering construction Section MM: Ancillary roadworks Standardized specification for civil engineering construction Section NB: Railway sidings (trackwork) The application of rubber linings to pipes.REV 3:9999.Boundary dimensions and tolerances Braking 1 2 2 1 1 2 1 1 1 2 3 1 1 1 1 1 SANS 1206:2005/ISO 1206:2001. 74/132/EEC:1974. 49 and 69 . MOD. ECE R13. 79/489/EEC:1979.Needle roller bearings. 75/524/EEC:1975.04 1. dimension series 48. pipe fittings and vessels Rolling bearings . MOD (SABS 1207) SANS 1209:2008 (SABS 1209) 1. MOD. 3 1 SANS 1207:1998/71/320/EEC:1971. IDT. Ed. 01 Hexagon wrench keys 1. for interior and exterior use Abrasion-resistant polymeric gloves: Lined type 2.03 Polish stripper 1 Ammoniated liquid detergent cleaner 1.01 Single-stage regulators for liquefied petroleum gas (LPG) Page 52 .04 Mechanical cable glands 1.04 Textured wall coatings.01 Fibre-cement pressure pipes and couplings 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1210:2007 (SABS 1210) SANS 1211:2007 (SABS 1211) SANS 1212:2005 (SABS 1212) SANS 1213:2002 (SABS 1213) SANS 1215:2008 (SABS 1215) SANS 1216:2002 (SABS 1216) SANS 1217:2001 (SABS 1217) SANS 1218:2008 (SABS 1218) SANS 1219:2007 (SABS 1219) SANS 1221:2000 (SABS 1221) SANS 1223:2003 (SABS 1223) SANS 1224:2006 (SABS 1224) SANS 1225:1985 (SABS 1225) SANS 1227:2005 (SABS 1227) SANS 1228:2009 (SABS 1228) SANS 1231:1993 (SABS 1231) SANS 1232:1993 (SABS 1232) SANS 1233:1993 (SABS 1233) SANS 1235:2007 (SABS 1235) SANS 1236:2005 (SABS 1236) SANS 1237:2007 (SABS 1237) Edition Title 1.01 Silvered glass mirrors for general use 3.02 1.04 The National Flag 1.03 The production of painted and powder-coated steel pipes Hydraulic oil (anti-wear type) 1.05 1.01 2 The production of half-concentrated Darrow's solution with dextrose for injections The production of sodium bicarbonate injections of various strengths The production of a balanced solution of electrolytes for injection Borehole cylinders 2 2 1. emulsion base.04 Concrete masonry units 2.02 Solvent-emulsion degreasers 1.05 Hand hacksaw blades 2 Detergent skin cleansers 2.02 Adjustable wrenches 2. 01 SANS 1261-3:2008 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1238:2005 (SABS 1238) SANS 1239:2004 (SABS 1239) SANS 1240:2006 (SABS 1240) SANS 1241:2008 (SABS 1241) SANS 1242:2008 (SABS 1242) SANS 1243:2007 (SABS 1243) SANS 1244:1979 (SABS 1244) SANS 1247:2005/ISO 1247:1974. Ed.04 2 Engine cooling system protectors 2.02 Pantihose and knee-highs 3 Pressurized paraffin-fuelled appliances 1 Tubular steel framed chairs and stools 1 Aluminium pigments for paints SANS 1248:1988 (SABS 1248) SANS 1249:2007 (SABS 1249) SANS 1251:2005 (SABS 1251) SANS 1252:2004 (SABS 1252) SANS 1253:2003 (SABS 1253) SANS 1255:2009 (SABS 1255) SANS 1259:2008 (SABS 1259) SANS 1260:2004 (SABS 1260) SANS 1261-1:2008 1. IDT. socket-outlets and couplers for industrial purposes Automatic shut-off flush valves for water closets and urinals Aluminium sulfate for general purposes 2.01 SANS 1263-1:2006 (SABS 1263-1) 3.01 Performance requirements for retail textiles Part 1: Household piece-goods and articles Performance requirements for retail textiles Part 2: Piece-goods for women's and girls' wear Performance requirements for retail textiles Part 3: Piece-goods for men's and boys' wear Safety and security glazing materials for buildings Part 1: Safety performance of glazing materials under human impact SANS 1261-2:2008 2.01 Page 53 .01 Dental casting gold alloys 1. 1 Edition Title 2 Air-conditioning ductwork 2.01 Passive antennas for the reception of VHF and UHF television and VHF sound transmissions Fire-doors and fire-shutters 3 2 Oven cleaner and grease remover 1.01 Devices to prevent the unauthorized use of motor vehicles (anti-theft devices) Knitted uniform fabrics 2.01 2 2.01 Invert bitumen emulsion 2.02 Plugs. 04 1.01 Ventilation brattices and ducting Part 1: Flexible ducting Ventilation brattices and ducting Part 2: Brattices. MOD (SABS 1269) SANS 1270:2007 (SABS 1270) SANS 1271:1999 (SABS 1271) SANS 1272:2007 (SABS 1272) SANS 1273:1979 (SABS 1273) SANS 1274:2005 (SABS 1274) SANS 1275:2006/ISO 1275:1995.01 Page 54 .02 1.01 Flexible polyurethane foam sleeping mats and mattresses Part 1: Mats and mattresses having unsupported polymeric covers Flexible polyurethane foam sleeping mats and mattresses Part 2: Foam mattresses for domestic and hotel use 2. Ed.04 Modified poly(vinyl chloride) (PVC-M) pressure pipe and couplings for cold water services in underground mining Bow-saw frames and blades 1.02 1.01 3 2 Military webbing 1 Fasteners for roof and wall coverings in the form of sheeting Coatings applied by the powder-coating process 2 1 Double-pitch precision roller chains and sprockets for transmission and conveyors Rinse aid for use in dishwashing machines SANS 1281:2004 (SABS 1281) SANS 1283:2008 (SABS 1283) SANS 1284:2007 (SABS 1284) SANS 1285:2007 (SABS 1285) SANS 1287-1:2007 (SABS 1287-1) SANS 1287-2:2007 (SABS 1287-2) SANS 1288:2008 (SABS 1288) SANS 1291-1:2003 (SABS 1291-1) SANS 1291-2:2009 (SABS 1291-2) 1.01 3.02 1. 3 Edition Title 1. IDT.01 3.04 1.01 Safety and security glazing materials for buildings Part 2: Burglar-resistant and vandal-resistant glazing materials Safety and security glazing materials for buildings Part 3: Bullet-resistant glazing materials Waxy oil obtained from the synthol process and from other petroleum sources Ballasts for discharge lamps (excluding tubular fluorescent lamps) Motor vehicle safety: Head restraints (passenger cars) General requirements for woven textile piece-goods and household articles Mepivacaine hydrochloride injection for dental use 1. unsupported Preservative-treated timber 1.03 Woodworking saws for hand use 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1263-2:2007 (SABS 1263-2) SANS 1263-3:2007 (SABS 1263-3) SANS 1265:2009 (SABS 1265) SANS 1266:2007 (SABS 1266) SANS 1269:2002/78/932/EEC:1978.03 2. Ed. IDT.01 Page 55 .Technical delivery conditions Conveyor belt idlers Part 1: Troughed belt conveyor idlers (metallic and non-metallic) for belt speeds of up to 5.0 m/s Conveyor belt idlers Part 2: Link suspended idlers and fixed-form suspended idlers Cotton cellular blankets SANS 1313-1:2002 (SABS 1313-1) SANS 1313-2:1998 (SABS 1313-2) SANS 1316:2007 (SABS 1316) 3. steps and trestles for household use Sealing compounds for the building industry. IDT. onecomponent.01 Toothpaste 1.01 Leather gloves 1. Ed.01 Castors for furniture 2 Precast concrete manhole sections and components 1. 1 1.02 Wrought copper alloys Part 1: Chemical composition of copper-zinc alloys (non-leaded and leaded) Light ladders 1 1 Light ladders Part 2: Portable aluminium ladders. tolerances and designation Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges Domestic solar water heaters SANS 1305:2009 (SABS 1305) SANS 1306-1:2006/ISO 228-1:2000.02 3 2 4 3 Plaster-of-Paris bandages 2 Printed labels for textiles 1.01 1 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1292:2009 (SABS 1292) SANS 1294:2006 (SABS 1294) SANS 1297:2001 (SABS 1297) SANS 1298:2001 (SABS 1298) SANS 1302:2008 (SABS 1302) SANS 1303-1:2008 (SABS 1303-1) SANS 1304:1980 (SABS 1304) SANS 1304-2:2009 Edition Title 1. IDT (SABS 1306-2) SANS 1307:2009 (SABS 1307) SANS 1308:2007 (SABS 1308) SANS 1309:2007 (SABS 1309) SANS 1310:2007 (SABS 1310) SANS 1311:2007 (SABS 1311) SANS 1312:2008/EN 10312:2002. 4 (SABS 1306-1) SANS 1306-2:1990/ISO 228-2:1987.02 Refuse bins of polymeric materials 1.02 Metal clisco windows 1 Welded stainless steel tubes for the conveyance of water and other aqueous liquids .02 Ladies' fashion handbags 1. silicone-rubber-base Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions. chevron signs and abnormal load vehicle signs Retro-reflective and fluorescent warning signs for road vehicles Part 4: Retro-reflective chevron signs Retro-reflective and fluorescent warning signs for road vehicles Part 5: Retro-reflective chevron decals Waterless hand cleaners 2.04 Electrical connectors for towing and towed vehicles (7-pole connectors) Retro-reflective and fluorescent warning signs for road vehicles Part 1: Triangles Retro-reflective and fluorescent warning signs for road vehicles Part 2: Abnormal load vehicle signs Retro-reflective and fluorescent warning signs for road vehicles Part 3: Signs other than triangles.05 2.04 2.03 PVC gum boots Part 1: Injection-moulded gum boots PVC gum boots Part 2: Dip-moulded gum boots with pre-moulded stuck-on outer soles and heels PVC gum boots Part 3: Injection-moulded ankle boots for men Non-metallic waste traps Part 1: Plastics waste traps 1.01 Abrasion-resisting white cast irons 3.02 Non-metallic waste traps Part 2: Rubber waste traps 1.02 1.01 1.02 Sodium lauryl ether sulphate 1.07 1.03 Portable.Cross-linked polyethylene (XLPE) insulated cables for rated voltages 3.02 Electric cables .Standards available in electronic format (PDF) October 2009 SANS Number SANS 1317:1980/ISO 3999:1977.01 1. non-refillable fire extinguishers (general purpose type) Upholstery fabrics 2.03 3. NEQ (SABS 1317) SANS 1319:2009 (SABS 1319) SANS 1320-1:2001 (SABS 1320-1) SANS 1320-2:2001 (SABS 1320-2) SANS 1320-3:2006 (SABS 1320-3) SANS 1321-1:2009 (SABS 1321-1) SANS 1321-2:2007 (SABS 1321-2) SANS 1322:2004 (SABS 1322) SANS 1324:2006 (SABS 1324) SANS 1326:2008 (SABS 1326) SANS 1327:2004 (SABS 1327) SANS 1329-1:2004 (SABS 1329-1) SANS 1329-2:2004 (SABS 1329-2) SANS 1329-3:2007 (SABS 1329-3) SANS 1329-4:2006 (SABS 1329-4) SANS 1329-5:2006 (SABS 1329-5) SANS 1330:1981 (SABS 1330) SANS 1337:1982 (SABS 1337) SANS 1338:2008 (SABS 1338) SANS 1339:2006 (SABS 1339) Edition Title 1 Apparatus for gamma radiography 3 Zinc phosphate primer for steel 1.6 kV to 19/33 kV Page 56 .04 1.8/6.04 1 1 Dental zinc oxide-eugenol impression paste 1. 02 Size designation of clothes Part 5: Headwear 1.02 Size designation of clothes Part 4: Gloves 1.02 1.01 Size designation of clothes Part 6: Men's and boys' underwear.02 Detergent for high-pressure cleaning (hot and steam cleaning) Insecticidal solid fumigants that contain aluminium phosphide (food storage premises) Medium duty solvent detergent 3 2 1. nightwear and shirts Size designation of clothes Part 7: Women's and girls' underwear. foundation garments and shirts Sewing threads 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1341:2003 (SABS 1341) SANS 1343:2009 (SABS 1343) SANS 1344:2009 (SABS 1344) SANS 1348:2005 (SABS 1348) SANS 1349:2006 (SABS 1349) SANS 1350:2005 (SABS 1350) SANS 1351:2007 (SABS 1351) SANS 1354:2008 (SABS 1354) SANS 1356:2006 (SABS 1356) SANS 1357:2008 (SABS 1357) SANS 1360-1:2008 (SABS 1360-1) SANS 1360-2:2008 (SABS 1360-2) SANS 1360-3:2008 (SABS 1360-3) SANS 1360-4:2008 (SABS 1360-4) SANS 1360-5:2008 (SABS 1360-5) SANS 1360-6:2008 (SABS 1360-6) SANS 1360-7:2008 (SABS 1360-7) SANS 1362:2008 (SABS 1362) SANS 1363:1999 (SABS 1363) SANS 1365:2009 (SABS 1365) Edition Title 1. and for furniture and joinery Guardrails for roads (W-section) 1.02 Polyvinyl acetate dispersion adhesives for wood 1.02 1.02 Size designation of clothes Part 1: Men's and boys' outerwear garments Size designation of clothes Part 2: Women's and girls' outerwear garments Size designation of clothes Part 3: Infants' garments 1.04 Screwdrivers for cross-recessed-head screws 2 Fixed electric instantaneous water heaters 1. aminoplastic and one-part polyurethane resin adhesives for the laminating and finger-jointing of timber.01 2.01 Granite surface plates and tables 1.02 Phenolic.08 2 Young people's shoes (stuck-on and stitch-down constructions) Solvent degreasers that contain chlorinated hydrocarbons 3 Page 57 .02 2 Canvas tentage and tarpaulin webbing 1. nightwear. 01 Chain-link fencing and its wire accessories 2.06 Lights for motor vehicles Part 1: Incandescent lamps 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1366:2006 (SABS 1366) SANS 1367-1:2007 (SABS 1367-1) SANS 1367-2:2007 (SABS 1367-2) SANS 1370:2007 (SABS 1370) SANS 1371:2008 (SABS 1371) SANS 1372:1983 (SABS 1372) SANS 1373:2008 (SABS 1373) SANS 1374:2008 (SABS 1374) SANS 1375:2005 (SABS 1375) SANS 1376-1:2008 (SABS 1376-1) SANS 1376-2:2006 (SABS 1376-2) SANS 1376-3:2006 (SABS 1376-3) SANS 1381-1:2007 (SABS 1381-1) SANS 1381-2:2007 (SABS 1381-2) SANS 1381-4:2009 (SABS 1381-4) SANS 1381-6:1994 (SABS 1381-6) SANS 1382-1:2008 (SABS 1382-1) SANS 1382-2:2008 (SABS 1382-2) SANS 1383:2008 (SABS 1383) SANS 1384:2006 (SABS 1384) SANS 1385:2008 (SABS 1385) Edition Title 2.05 Lights for motor vehicles Part 3: Secondary lights 3. sheets and sections) Materials for thermal insulation of buildings Part 6: Cellulose loose fill thermal insulation material Hose Part 1: Men's and women's hose for institutional use Hose Part 2: Commercial and sports hose 1.02 1 1.01 Textile floor coverings (pile construction) 1.04 Lights for motor vehicles Part 2: Headlights 1.01 2 1 2.02 1.01 Steel cord reinforced conveyor belting 2 Horticultural mineral oils for use on agricultural crops Part 1: Base oils Horticultural mineral oils for use on agricultural crops Part 2: Monophase emulsifiable concentrates Fluxes for the submerged arc welding of carbon and carbon manganese steels Ceramic hollow insulators for standard transformer bushings Prefabricated concrete components for fences 2 1.01 Kitchen cupboards: Built-in and free-standing Page 58 .02 1.01 Rigid urethane and isocyanurate foams for use in thermal insulation Plastics containers for parenteral solutions 2 1.01 Materials for thermal insulation of buildings Part 1: Fibre thermal insulation mats Materials for thermal insulation of buildings Part 2: Loose fill thermal insulation material Materials for thermal insulation of buildings Part 4: Reflective foil laminates (rolls.01 Toothbrushes 3.02 1. 02 Steel fencing for private swimming pools 1.01 Wooden scaffold boards 1 Industrial safety helmets SANS 1399:2008 (SABS 1399) 2. Ed. IDT. 1 Edition Title 2 Woven cotton and similar apparel fabrics Parts 1 11.01 Soft-top suitcases 2.01 1. bound together.03 Duvets and pillows Part 1: Plumage filled 1. loose-leaf Woven cotton and similar apparel fabrics Part 1: Basic requirements Woven cotton and similar apparel fabrics Part 2: Polyester-and-cotton workwear fabrics Woven cotton and similar apparel fabrics Part 3: Polyester-and-viscose workwear fabrics Woven cotton and similar apparel fabrics Part 4: Cotton jean and drill fabrics Woven cotton and similar apparel fabrics Part 5: Cotton flannelette fabrics Woven cotton and similar apparel fabrics Part 6: Denim fabrics Woven cotton and similar apparel fabrics Part 7: Jacket linings Woven cotton and similar apparel fabrics Part 8: Cotton dress fabrics Woven cotton and similar apparel fabrics Part 9: Polyester-and-cotton shirt fabrics Woven cotton and similar apparel fabrics Part 10: Pocketing Woven cotton and similar apparel fabrics Part 11: Polyester-and-cellulosic raincoat fabrics Tables 2 2 2 2 2 2 2 2 2 2 2 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1387 (PARTS 1-11):2003 (SABS 1387 (PARTS 1-11)) SANS 1387-1:2003 (SABS 1387-1) SANS 1387-2:2003 (SABS 1387-2) SANS 1387-3:2003 (SABS 1387-3) SANS 1387-4:2003 (SABS 1387-4) SANS 1387-5:2003 (SABS 1387-5) SANS 1387-6:2003 (SABS 1387-6) SANS 1387-7:2003 (SABS 1387-7) SANS 1387-8:2003 (SABS 1387-8) SANS 1387-9:2003 (SABS 1387-9) SANS 1387-10:2003 (SABS 1387-10) SANS 1387-11:2003 (SABS 1387-11) SANS 1389:2009 (SABS 1389) SANS 1390:2005 (SABS 1390) SANS 1392:2002 (SABS 1392) SANS 1394-1:2009 (SABS 1394-1) SANS 1394-2:2003 (SABS 1394-2) SANS 1396:2008 (SABS 1396) SANS 1397:2003/EN 397:1995.02 Duvets and pillows Part 2: Synthetic-fibre filled 2.03 Wood charcoal and charcoal briquettes for household use Page 59 . 01 2. and other terry weave articles Woven cotton and similar household fabrics and articles Part 6: Cotton curtain fabrics Woven cotton and similar household fabrics and articles Part 7: Cotton curtain lining Woven cotton and similar household fabrics and articles Part 8: Bedspread fabrics and bedspreads Woven cotton and similar household fabrics and articles Part 9: Cotton flannelette duster fabric and dusters Woven cotton and similar household fabrics and articles Part 10: Cotton ticking Woven cotton and similar household fabrics and articles Part 11: Featherproof fabrics Woven cotton and similar household fabrics and articles Part 12: Kitchen cloth fabric and kitchen cloths Woven cotton and similar household fabrics and articles Part 13: Cotton huckaback towelling and towels Woven cotton and similar household fabrics and articles Part 14: Cotton table-cloth fabric. handshields.01 2.01 2. face and neck protection against non-ionizing radiation arising during welding and similar operations . loose-leaf Woven cotton and similar household fabrics and articles Part 1: Basic requirements for piece-goods and made-up articles Woven cotton and similar household fabrics and articles Part 2: Winter sheeting.01 2. and table napkins Woven cotton and similar household fabrics and articles Part 15: Cotton dishcloth fabrics and dishcloths Acrylic sanitary ware Part 1: Baths SANS 1401 (PARTS 1-15):2007 (SABS 1401 (PARTS 1-15)) SANS 1401-1:2007 (SABS 1401-1) SANS 1401-2:2007 (SABS 1401-2) SANS 1401-3:2007 (SABS 1401-3) SANS 1401-4:2007 (SABS 1401-4) SANS 1401-5:2007 (SABS 1401-5) SANS 1401-6:2007 (SABS 1401-6) SANS 1401-7:2007 (SABS 1401-7) SANS 1401-8:2007 (SABS 1401-8) SANS 1401-9:2007 (SABS 1401-9) SANS 1401-10:2007 (SABS 1401-10) SANS 1401-11:2007 (SABS 1401-11) SANS 1401-12:2007 (SABS 1401-12) SANS 1401-13:2007 (SABS 1401-13) SANS 1401-14:2007 (SABS 1401-14) SANS 1401-15:2007 (SABS 1401-15) SANS 1402-1:2008 (SABS 1402-1) SANS 1404:2002/BS 2092:1987. goggles and welding spectacles Woven cotton and similar household fabrics and articles Parts 1 . NEQ (SABS 1404) 2. sheets.01 2.01 2.01 2. and pillowcases Woven cotton and similar household fabrics and articles Part 4: Polyester-and-cotton sheeting.01 2.03 Eye protectors for industrial and non-industrial use Page 60 . towels.01 2.01 2. sheets and pillowcases Woven cotton and similar household fabrics and articles Part 3: Cotton sheeting. sheets and pillowcases Woven cotton and similar household fabrics and articles Part 5: Terry towelling.01 2.02 2. bound together.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1400:1993 (SABS 1400) Edition Title 2 Equipment (including oculars) for eye.01 2.15.01 1.01 2.01 2.Welding helmets.01 2. tablecloths. 07 1.01 2.03 Page 61 .02 2.01 2.01 2.01 Anodized coatings on aluminium (for general applications) Mechanical components for tendon based rock support systems Outlet sockets and probes for medical (gas and vacuum) services used in hospitals Materials of insulated electric cables and flexible cords Part 1: Conductors Materials of insulated electric cables and flexible cords Part 2: Polyvinyl chloride (PVC) Materials of insulated electric cables and flexible cords Part 3: Elastomers Materials of insulated electric cables and flexible cords Part 4: Cross-linked polyethylene (XLPE) Materials of insulated electric cables and flexible cords Part 5: Halogen-free.02 1. IDT.Determination of tensile strength and elongation at break Domestic electric laundry treatment machines 2 1.or plastics-coated fabrics .03 1.04 2.02 3.02 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1406:2006 (SABS 1406) SANS 1407:2007 (SABS 1407) SANS 1408:2002 (SABS 1408) SANS 1409:2008 (SABS 1409) SANS 1411-1:2008 (SABS 1411-1) SANS 1411-2:2009 (SABS 1411-2) SANS 1411-3:2006 (SABS 1411-3) SANS 1411-4:2009 (SABS 1411-4) SANS 1411-5:2009 (SABS 1411-5) SANS 1411-6:2008 (SABS 1411-6) SANS 1411-7:2009 (SABS 1411-7) SANS 1415:2009 (SABS 1415) SANS 1416:2005 (SABS 1416) SANS 1418-1:2009 (SABS 1418-1) SANS 1418-2:2009 (SABS 1418-2) SANS 1419:2009 (SABS 1419) SANS 1420:2009 (SABS 1420) SANS 1421:1998/ISO 1421:1998.01 2.01 2. flame-retardant materials Materials of insulated electric cables and flexible cords Part 6: Armour Materials of insulated electric cables and flexible cords Part 7: Polyethylene (PE) Textile floor coverings (needle-punched construction) Alkali-resistant plaster primer (pigmented.01 Performance requirements for textile fabrics of low flammability Part 1: Apparel fabrics Performance requirements for textile fabrics of low flammability Part 2: Curtain and drape fabrics 1. 2 (SABS ISO 1421) SANS 1422:2006 (SABS 1422) SANS 1423-1:2008 (SABS 1423-1) SANS 1423-2:2009 (SABS 1423-2) Edition Title 3 Commercial refrigerated food display cabinets 2. solventtype) Aerial bundled conductor systems Part 1: Cores 2 1. Ed.05 Aerial bundled conductor systems Part 2: Assembled insulated conductor bundles Carpet underlays 2.01 Bed bases (spring upholstered) 1 Rubber. relating to the rear-view mirrors of motor vehicles. 81/577/EECAI & AIII:1981.04 Page 62 . NEQ. MOD. as amended by EEC Directives 79/795. NEQ. NEQ (SABS 1436) SANS 1437:2003 (SABS 1437) SANS 1438-1:1987 (SABS 1438-1) SANS 1438-2:1987 (SABS 1438-2) SANS 1438-3:2005 (SABS 1438-3) SANS 1438-4:1987 (SABS 1438-4) SANS 1438-5:1987 (SABS 1438-5) SANS 1439:2008 (SABS 1439) Edition Title 2 Performance requirements for textile fabrics of low flammability Part 3: Upholstery fabrics Performance requirements for textile fabrics of low flammability Part 4: Bedding fabrics. 85/205 and 88/321. MOD (SABS 1429) SANS 1430:2007 (SABS 1430) SANS 1431:2007 (SABS 1431) SANS 1433-1:2008 (SABS 1433-1) SANS 1433-2:2008 (SABS 1433-2) SANS 1435:2004 (SABS 1435) SANS 1436:1994/71/127/EEC:1971.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1423-3:2004 (SABS 1423-3) SANS 1423-4:2004 (SABS 1423-4) SANS 1423-5:2008 (SABS 1423-5) SANS 1424:2008 (SABS 1424) SANS 1427:2006 (SABS 1427) SANS 1429:1987/74/408/EEC:1974.01 2 1 1 1.02 1. bedcovers and pillows Performance requirements for textile fabrics of low flammability Part 5: Fabrics for use in movable office partitions Filters for use in air-conditioning and general ventilation Conforming bandages 2 1. with modifications) Footwear soling material and footwear sole and heel components of rubber and plastics Helmet light assemblies for miners Part 1: Incandescent lamps Helmet light assemblies for miners Part 2: Lead-acid batteries Helmet light assemblies for miners Part 3: Cables 1.01 Electrical terminals and connectors Part 1: Terminal blocks having screw and screwless terminals Electrical terminals and connectors Part 2: Flat push-on connectors Biocides for use in emulsions of aqueous metal working fluid and aqueous hydraulic fluid The rear-view mirrors of motor vehicles of categories M and N (Incorporating EEC Directive 71/127. 85/205/EEC:1985. 79/795/EEC:1979. NEQ.01 1.04 1 Helmet light assemblies for miners Part 4: Helmet lights (headlights) Helmet light assemblies for miners Part 5: Helmet light assemblies Automotive upholstery fabrics 1 2.01 2 1 Motor vehicle safety: Strength of seats and their anchorages Anchorages for restraining devices in motor vehicles 1.01 1.01 1. 88/321/EEC:1988.08 Weldable structural steels 1. 01 Braking (motor and towed vehicles.01 1.01 2.01 Schoolwear fabrics Part 3: Polyester-and-wool fabrics Schoolwear fabrics Part 4: Polyester-and-viscose fabrics Schoolwear fabrics Part 5: Polyester-and-cotton fabrics Schoolwear fabrics Part 6: Shirting and blouse fabrics Schoolwear fabrics Part 7: Fabrics containing textured yarns Schoolwear fabrics Part 8: Warp-knitted fabrics 2. MOD.01 1.01 Ceramic wall and floor tiles Page 63 .01 Thermal insulation materials for industrial applications Part 2: Metal-mesh-faced mineral fibre mattresses Thermal insulation materials for industrial applications Part 3: Bonded preformed mineral fibre pipe sections Glass rovings 1. MOD (SABS 1440) SANS 1441:2006/75/443/EEC:1975.8. bound together. MOD (SABS 1441) SANS 1442:2008 (SABS 1442) SANS 1443:1987/70/387/EEC:1970.01 Schoolwear fabrics Parts 1 . designed for low speed or for use off public roads) Part 2: Low speed trailers Wax emulsion for coating citrus fruit 2. MOD (SABS 1443) SANS 1444 SET:2008 (SABS 1444 SET) SANS 1444-1:2008 (SABS 1444-1) SANS 1444-2:2008 (SABS 1444-2) SANS 1444-3:2008 (SABS 1444-3) SANS 1444-4:2008 (SABS 1444-4) SANS 1444-5:2008 (SABS 1444-5) SANS 1444-6:2008 (SABS 1444-6) SANS 1444-7:2008 (SABS 1444-7) SANS 1444-8:2008 (SABS 1444-8) SANS 1445-2:2008 (SABS 1445-2) SANS 1445-3:2008 (SABS 1445-3) SANS 1446:2007 (SABS 1446) SANS 1447-1:2007 (SABS 1447-1) SANS 1447-2:2007 (SABS 1447-2) SANS 1448:2006 (SABS 1448) SANS 1449:2008 (SABS 1449) Edition Title 1 Motor vehicle safety: The steering mechanism of motor vehicles (Category M1 only): Behaviour on impact Speedometer equipment on motor vehicles 2 1. ECE R39:1983.01 2.02 2.01 2 2. binder extra Schoolwear fabrics Part 1: Basic requirements 2. loose leaf.03 Roadstuds 1 Motor vehicle safety: Door latches and hinges 2.01 2.01 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1440:1987/74/297/EEC:1974.01 Schoolwear fabrics Part 2: Blazer fabrics 2. designed for low speed or for use off public roads) Part 1: Low speed vehicles Braking (motor and towed vehicles.01 2. 01 1. 1 1 SANS 1464-22:2007 (SABS 1464-22) SANS 1465-1:2008 (SABS 1465-1) SANS 1465-2:2008 (SABS 1465-2) SANS 1465-3:2008 (SABS 1465-3) SANS 1467:2007 (SABS 1467) 1.02 Copper tubes for medical gas and vacuum services 1.01 1.01 1.02 1.01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1451-1:2008 (SABS 1451-1) SANS 1451-2:2008 (SABS 1451-2) SANS 1451-3:2008 (SABS 1451-3) SANS 1452:2005 (SABS 1452) SANS 1453:2008 (SABS 1453) SANS 1456-1:2007 (SABS 1456-1) SANS 1456-2:2007 (SABS 1456-2) SANS 1456-3:2007 (SABS 1456-3) SANS 1456-4:2007 (SABS 1456-4) SANS 1456-5:2007 (SABS 1456-5) SANS 1457:2008 (SABS 1457) SANS 1459:2004 (SABS 1459) SANS 1460:2006 (SABS 1460) SANS 1463-1:2007/EN 1463-1:1997. IDT.03 1.01 Hearing protectors Part 2: Ear-plugs 1.03 1.03 1.02 Collapsible delivery hose for fire fighting purposes Part 1: General requirements and methods of test Collapsible delivery hose for fire fighting purposes Part 2: Percolating fire hose Collapsible delivery hose for fire fighting purposes Part 3: Uncoated non-percolating fire hose Collapsible delivery hose for fire fighting purposes Part 4: Coated non-percolating fire hose Collapsible delivery hose for fire fighting purposes Part 5: Oil-resistant and chemical-resistant fire hose Plastics buttons 1.01 1. 1 Edition Title 1.02 Hearing protectors Part 1: Ear-muffs 1.02 Hearing protectors Part 3: Ear-muffs attached to an industrial safety helmet Overhead projectors 1.Retroreflecting road studs Part 2: Road test performance specifications Safety of luminaires Part 22: Luminaires for emergency lighting Steel castings for general engineering applications Part 1: Carbon and low alloy steel castings Steel castings for general engineering applications Part 2: Wear-resistant carbon and low alloy steel castings Steel castings for general engineering applications Part 3: Corrosion-resistant and heat-resistant steel castings Narrow bandsaw blades SANS 1463-2:2007/EN 1463-2:2000.Retroreflecting road studs Part 1: Initial performance requirements Road marking materials .03 1.04 Laminated timber (glulam) 1 Road marking materials . Ed. Ed. IDT.04 Traffic lights 1.02 Page 64 . Ed.01 1. hydrants and booster connections Fabricated flanged steel pipework 4 1.02 Sound power labelling Part 2: Welding generators 2 Sound power labelling Part 3: Rotating electrical machinery Sound power labelling Part 4: Pneumatic equipment 2 1 Textile floor coverings .02 2 Ladies' shoes. 79/622/EEC:1979.03 Uninterruptible power systems 3.02 SANS 1480:2005 (SABS 1480) SANS 1482:2008 (SABS 1482) SANS 1484:2007 (SABS 1484) SANS 1485:2007 (SABS 1485) 1. MOD.Assessment of changes in appearance Plastics safety glazing materials for motor vehicles 1. with stuck-on outer soles 2 Permitted explosives 1. IDT.02 1. MOD (SABS 1468) Edition Title 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1468:2006/82/953/EEC:1982. flat lasted.01 2 Pneumatic braking system connections between drawing and drawn vehicles Part 1: Contact type couplings Pneumatic braking system connections between drawing and drawn vehicles Part 2: Palm type couplings Pneumatic braking system connections between drawing and drawn vehicles Part 3: The arrangement of connections on vehicles.01 Flexible intermediate bulk containers Page 65 .01 Roll-over protection structures for wheeled agricultural or forestry tractors (static testing)(Incorporating EEC Directive 79/622. using contact type or palm type couplings Single control mixer taps 1. relating to the roll-over protection structures of wheeled agricultural or forestry tractors (static testing). as amended by EEC Directive 82/953.03 The production of reconditioned fire-fighting equipment Part 1: Portable and wheeled (mobile) rechargeable fire extinguishers The production of reconditioned fire-fighting equipment Part 2: Fire hose reels. 1 (SABS EN 1471) SANS 1472:2005 (SABS 1472) SANS 1474:2004 (SABS 1474) SANS 1475-1:2006 (SABS 1475-1) SANS 1475-2:2008 (SABS 1475-2) SANS 1476:2006 (SABS 1476) SANS 1477-1:2008 (SABS 1477-1) SANS 1477-2:2005 (SABS 1477-2) SANS 1477-3:2005 (SABS 1477-3) 1. with modifications) Sound power labelling Part 1: Compressors SANS 1470-1:2008 (SABS 1470-1) SANS 1470-2:2008 (SABS 1470-2) SANS 1470-3:2008 (SABS 1470-3) SANS 1470-4:2008 (SABS 1470-4) SANS 1471:1996/EN 1471:1996.01 1. 03 Ball type couplings and towing brackets for towing caravans and light trailers Part 1: Towing brackets and integrated towing devices Ball type couplings and towing brackets for towing caravans and light trailers Part 2: Coupling balls and ball supports Ball type couplings and towing brackets for towing caravans and light trailers Part 3: Coupling sockets 2.02 2.01 1 2 Portland cement extenders Part 1: Ground granulated blast-furnace slag Portland cement extenders Part 2: Fly ash 2 2.01 Mobile refuse bins 1.02 Domestic electric floor treatment machines Part 1: Vacuum cleaners Domestic electric floor treatment machines Part 2: Floor polishers Flameproof restrained and bolted type plugs and sockets Commercial ammunition 1.01 Portland cement extenders Part 3: Silica fume 2 Men's shoes with stuck-on outer soles Part 1: Flat lasted construction Men's shoes with stuck-on outer soles Part 2: California type construction Men's shoes with stuck-on outer soles Part 3: Moccasin type construction Electroless nickel-phosphorus plated coatings 2 2 1.04 Microwave cooking appliances for domestic use 1 Prestressed concrete lintels 2.04 Wheel flaps fitted to motor vehicles 2 Biocides for use in industrial cooling water 2 Algaecides for use in industrial cooling water 2.03 2.03 Page 66 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 1486-1:2006 (SABS 1486-1) SANS 1486-2:2006 (SABS 1486-2) SANS 1489:2001 (SABS 1489) SANS 1490:1989 (SABS 1490) SANS 1491-1:2005 (SABS 1491-1) SANS 1491-2:2005 (SABS 1491-2) SANS 1491-3:2006 (SABS 1491-3) SANS 1492-1:2008 (SABS 1492-1) SANS 1492-2:2008 (SABS 1492-2) SANS 1492-3:2008 (SABS 1492-3) SANS 1493:2007 (SABS 1493) SANS 1494:2007 (SABS 1494) SANS 1496:2008 (SABS 1496) SANS 1497:2006 (SABS 1497) SANS 1498:2007 (SABS 1498) SANS 1502:2008 (SABS 1502) SANS 1504:1990 (SABS 1504) SANS 1505-1:2007 (SABS 1505-1) SANS 1505-2:2007 (SABS 1505-2) SANS 1505-3:2007 (SABS 1505-3) Edition Title 1.01 1. 1.08 2. testing. approval and maintenance of road vehicles and portable tanks Road signs Part 1: Retro-reflective sheeting material 2.1 1.01 1.8/6. transportable.6 kV to 19/33 kV) cables Fire extinguishing powders 1.01 1 SANS 1516:2005 (SABS 1516) SANS 1517:2005 (SABS 1517) SANS 1518:2008 (SABS 1518) SANS 1519-1:2006 (SABS 1519-1) SANS 1519-2:2004 (SABS 1519-2) SANS 1520-1:2008 (SABS 1520-1) SANS 1520-2:2008 (SABS 1520-2) SANS 1522:2004 (SABS 1522) 3 3 3 2. Ed.01 2.01 Flush valves for WC flushing cisterns 1.02 1.01 Door closers Part 1: Single-action overhead door closers Gas measuring equipment primarily for use in mines Part 1: Battery-operated portable. 1 (SABS 1515-1) SANS 1515-2:2006 Edition Title 1. IEC 61779-2:1998.02 1. Ed.01 1.02 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1507-1:2007 (SABS 1507-1) SANS 1507-2:2007 (SABS 1507-2) SANS 1507-3:2007 (SABS 1507-3) SANS 1507-4:2009 (SABS 1507-4) SANS 1507-5:2009 (SABS 1507-5) SANS 1507-6:2007 (SABS 1507-6) SANS 1508:2007 (SABS 1508) SANS 1509:2008 (SABS 1509) SANS 1510-1:2008 (SABS 1510-1) SANS 1515-1:2006/IEC 61779-1:1998. MOD.02 1.01 Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 1: General Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 2: Wiring cables Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 3: PVC Distribution cables Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 4: XLPE Distribution cables Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 5: Halogen-free distribution cables Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 6: Service cables Expanded polystyrene thermal insulation boards 1. MOD. and vehicle-mounted flammable gas measuring and warning sensor heads and instruments High performance engine lubricating oil for petrol engines (for API Service Category SJ) High performance engine lubricating oil for diesel engines (for API Service Category CH-4) Transport of dangerous goods . construction. flammable gas measuring instruments and warning devices Gas measuring equipment primarily for use in mines Part 2: Fixed.01 Road signs Part 2: Performance requirements for road signs Flexible electric trailing cables for use in mines Part 1: Low-voltage (640/1 100 V and 1 900/3 300 V) cables Flexible electric trailing cables for use in mines Part 2: High-voltage (3.01 Page 67 .Design. 01 Furniture Part 6: High chairs for domestic use 1.04 Resin capsules for use with tendon based support systems Page 68 .01 Furniture Part 7: Children's cots for domestic use 2.02 Furniture Part 3: Storage units 1.01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1523:1990 (SABS 1523) SANS 1524-1:2005 (SABS 1524-1) SANS 1526:2003 (SABS 1526) SANS 1527:1991 (SABS 1527) SANS 1528-1:2008 (SABS 1528-1) SANS 1528-2:2008 (SABS 1528-2) SANS 1528-3:2009 (SABS 1528-3) SANS 1528-4:2008 (SABS 1528-4) SANS 1528-6:2008 (SABS 1528-6) SANS 1528-7:2008 (SABS 1528-7) SANS 1529-1:2006 (SABS 1529-1) SANS 1529-3:2006 (SABS 1529-3) SANS 1529-4:2004 (SABS 1529-4) SANS 1529-9:2008 (SABS 1529-9) Edition Title 1 Sheepskins (for medical use) 4.01 Electricity payment systems Part 1: Prepayment meters Thermoplastics sheeting for use as a geomembrane 2 1 Cash ticket-issuing machines for public transport (not for use with magnetic stripe tickets) Furniture Part 1: Seating 1.01 Furniture Part 4: Bunk beds for domestic use 1.03 Water meters for cold potable water Part 1: Metrological characteristics of mechanical water meters of nominal bore not exceeding 100 mm Water meters for cold potable water Part 3: Physical dimensions Water meters for cold potable water Part 4: Mechanical meters of nominal bore exceeding 100 mm but not exceeding 800 mm Water meters for cold potable water Part 9: Requirements for electronic indicators used with mechanical water meters. tables and computer stands 1. electronic water meters and electronic prepayment water measuring systems Prefabricated panels for thermal insulation Part 1: Panels with two impervious facing sheets Wood-cased pencils and extruded plastics pencils.04 Padlocks 1.01 SANS 1530-1:1991 (SABS 1530-1) SANS 1531:2003 (SABS 1531) SANS 1532:2003 (SABS 1532) SANS 1533:2005 (SABS 1533) SANS 1534:2004 (SABS 1534) 1 2 2 1. with graphite lead and coloured lead Vent valves for drainage installations 1.01 2.01 1.02 Furniture Part 2: Desks. Dimensions and loads Part 3: Commercial vehicle tyres Motor vehicle tyres and rims .03 Safety rules for the construction and installation of lifts Part 1: Electric lifts Safety rules for the construction and installation of lifts Part 2: Hydraulic lifts Safety rules for the construction and installation of lifts Part 3: Lifts for persons with disabilities (stairlifting platforms) Safety rules for the construction and installation of lifts Part 4: Lifts for persons with disabilities (vertical lifting platforms) Safety rules for the construction and installation of lifts Part 5: Electric and hydraulic access.02 1. goods only lifts Safety rules for the construction and installation of lifts Part 6: Rack-and-pinion lifts Safety rules for the construction and installation of lifts Part 7: Electric and hydraulic service lifts (dumb waiters) Safety rules for the construction and installation of lifts Part 9: Lift landing doors .01 Motor vehicle tyres and rims .03 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1535:2007 (SABS 1535) Edition Title 2.03 1.01 Escalators and passenger conveyors 3.01 2.01 Page 69 .01 SANS 1545-7:2007 1 SANS 1545-9:2004 1 SANS 1547:2005 (SABS 1547) SANS 1550-1:2005 (SABS 1550-1) SANS 1550-2:2006 (SABS 1550-2) SANS 1550-3:2006 (SABS 1550-3) SANS 1550-4:2005 (SABS 1550-4) SANS 1550-5:2006 (SABS 1550-5) 1.01 2.01 2.02 1 1.Dimensions and loads Part 4: Motorcycle and scooter tyres Motor vehicle tyres and rims .03 Glass-reinforced polyester-coated steel tanks for the underground storage of hydrocarbons and oxygenated solvents and intended for burial horizontally Plain-woven glass rovings for glass-reinforced plastics laminates Appliances operating on liquefied petroleum gas Safety aspects Men's and women's leather belts SANS 1538:2008 (SABS 1538) SANS 1539:2008 (SABS 1539) SANS 1540:1992 (SABS 1540) SANS 1542:1993 (SABS 1542) SANS 1543:2006 (SABS 1543) SANS 1545-1:2009 (SABS 1545-1) SANS 1545-2:2009 (SABS 1545-2) SANS 1545-3:2006 (SABS 1545-3) SANS 1545-4:2006 (SABS 1545-4) SANS 1545-5:2007 (SABS 1545-5) SANS 1545-6:2006 1.03 1.Dimensions and loads Part 1: General Motor vehicle tyres and rims .02 4.01 1.Dimensions and loads Part 2: Passenger car tyres Motor vehicle tyres and rims .Dimensions and loads Part 5: Off-the-road vehicle tyres 2.01 Safety helmets for pedal cyclists 2.Fire resistance testing Traffic signal controllers 3. 02 1.01 Electric flexible cores.Dimensions and loads Part 7: Industrial vehicle tyres Motor vehicle tyres and rims . MOD. cords and cables with solid extruded dielectric insulation Part 1: General Electric flexible cores.01 2. cords and cables with solid extruded dielectric insulation Part 3: PVC-insulated cores and cables Electric flexible cores.Dimensions and loads Part 10: Rim contours Check valves (flanged and wafer types) Part 1: PN series Check valves (flanged and wafer types) Part 2: Class series PVC-U window and door frames for external use Part 1: PVC-U profiles for window and door frames PVC-U window and door frames for external use Part 2: Windows with frames made from PVC-U profiles Roadworks delineators 2.01 Motor vehicle tyres and rims .01 2 Rewound and refurbished rotating electrical machines Part 1: Low-voltage three-phase induction motors The strength of large passenger vehicle superstructures (roll-over protection) The strength of seats (and their anchorages) of large passenger buses Portable rechargeable fire extinguishers .02 1.02 ISO metric screw threads Part 1: Principles and basic data for general purpose screw threads ISO metric screw threads Part 2: Selected limits of size for general purpose screw threads Sunscreen products 1. 1 (SABS 1563) SANS 1564:2005/ECE R80:1989.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1550-6:2005 (SABS 1550-6) SANS 1550-7:2005 (SABS 1550-7) SANS 1550-10:2006 (SABS 1550-10) SANS 1551-1:2008 (SABS 1551-1) SANS 1551-2:2007 (SABS 1551-2) SANS 1553-1:2007 (SABS 1553-1) SANS 1553-2:2007 (SABS 1553-2) SANS 1555:2008 (SABS 1555) SANS 1556-1:2005 (SABS 1556-1) SANS 1556-2:2005 (SABS 1556-2) SANS 1557:2005 (SABS 1557) SANS 1561-1:2006 (SABS 1561-1) SANS 1563:2005/ECE R66:1988. Ed.01 1. 1 (SABS 1564) SANS 1567:2003 (SABS 1567) SANS 1572:2007 (SABS 1572) SANS 1574-1:2008 Edition Title 2. cords and cables with solid extruded dielectric insulation Part 4: Rubberinsulated cores and cords Electric flexible cores.01 1.01 2.01 1. Ed.CO2 type extinguishers CO2 gas cartridges (steel) 1. MOD.01 2 1. cords and cables with solid extruded dielectric insulation Part 5: Rubberinsulated cores and cables SANS 1574-3:2007 1 SANS 1574-4:2007 1 SANS 1574-5:2007 1 Page 70 .01 1.01 2 1.Dimensions and loads Part 6: Agricultural vehicle tyres Motor vehicle tyres and rims . 03 Durable organic powders for coating of external architectural aluminium Liquid metal polish 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1575:2007 (SABS 1575) SANS 1576:2008 (SABS 1576) SANS 1578:2006 (SABS 1578) SANS 1579:2007 (SABS 1579) SANS 1580:2005 (SABS 1580) SANS 1581:2006 (SABS 1581) SANS 1582-1:2008 (SABS 1582-1) SANS 1582-2:2008 (SABS 1582-2) SANS 1584-1:2008 (SABS 1584-1) SANS 1584-3:2006 (SABS 1584-3) SANS 1585:2008 (SABS 1585) SANS 1586:2007 (SABS 1586) SANS 1587:2007 (SABS 1587) SANS 1588:2006 (SABS 1588) SANS 1589:1994 (SABS 1589) SANS 1592:2005 (SABS 1592) SANS 1593:1994 (SABS 1593) SANS 1594:2007 (SABS 1594) SANS 1595:2003 (SABS 1595) SANS 1596:2007 (SABS 1596) SANS 1597:1994 (SABS 1597) Edition Title 1.01 Shatter-resistant plastics rulers 1 The braking performance of trackless underground mining vehicles .02 1.02 1.04 1.01 1 Page 71 .Load haul dumpers and dump trucks Short-link steel chain (close-tolerance) for lifting appliances Disinfectants based on glutaraldehyde for use on medical instruments Manually operated chain blocks 1.04 Light industrial electric floor treatment machines Part 1: Vacuum cleaners Light industrial electric floor treatment machines Part 2: Floor polishers Television transmissions Part 1: Terrestrial television transmissions Television transmissions Part 3: NICAM transmissions Coated fabrics for shelters and rainwear 1.03 Emulsion paints 1.02 Electric cables . T(8) and V(10) Drop forged eyebolts and eyenuts for lifting purposes Antiseptics based on chlorhexidine gluconate 1.02 Hexagonal steel wire mesh gabions and revet mattresses Erasers made from plasticized PVC 1.01 1.01 Burnt clay paving units 1.01 Protection equipment for the front of motor vehicles 1.01 2 Forged steel lifting hooks for use with steel chains of strength grade M(4). P(5).01 2.02 1 2. S(6).Single core arc welding cable 1.01 1. MF and HF bands Electrodeposited coatings of silver and silver alloys for decorative and protective purposes 1.01 New replacement brake drums for motor vehicles 1 Conveyor chains and their attachments (British series) Bush conveyor chains 1 1. NEQ (SABS 1623) SANS 1624:1995 (SABS 1624) SANS 1625:2006 (SABS 1625) SANS 1626:2007 (SABS 1626) Edition Title 2 Unleaded petrol 1.01 Cranes Part 2: Power-driven mobile cranes 2 Permitted electric detonators 2 Structured wall pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for buried drainage and sewerage systems Electrodeposited coatings of copper and copper alloys Radio transmissions in the VHF band Part 1: Transmission standards for FM sound broadcasting The mechanical requirements for satellite television receiving antennas Paper punches (desk top types) 1. chain wheels and slats for slat conveyors 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1598:2006 (SABS 1598) SANS 1599-1:2006 (SABS 1599-1) SANS 1599-2:2003 (SABS 1599-2) SANS 1600:2007 (SABS 1600) SANS 1601:2007 (SABS 1601) SANS 1602:2007 (SABS 1602) SANS 1609-1:2005 (SABS 1609-1) SANS 1611:2005 (SABS 1611) SANS 1612:2007 (SABS 1612) SANS 1613:2007 (SABS 1613) SANS 1615:1995 (SABS 1615) SANS 1616:1995 (SABS 1616) SANS 1617:1994 (SABS 1617) SANS 1618:2008 (SABS 1618) SANS 1619:2009 (SABS 1619) SANS 1620:1995 (SABS 1620) SANS 1622:2009 (SABS 1622) SANS 1623:1995/BS 4116-4:1992.01 1.02 2 Warp-knitted terry towelling fabric and articles 1.01 Page 72 .04 Cranes Part 1: Cantilever/Slewing jib cranes 1.01 1.02 1 1.Insecticidal deltamethrin for interior use Small power distribution units (ready-boards) for single-phase 230 V service connections Barbed tape security barriers 2.01 Disinfectants based on glutaraldehyde for general use Detergent-disinfectants based on glutaraldehyde 1 1 Chains.02 Amplitude-modulated (AM) broadcast transmissions in the LF.01 Timber preservative .01 1. 02 Reconditioned manually operated chain lever hoists 2 Pneumatically powered chain hoists 1.01 1.02 Lenses for sunglasses and fashion spectacles Safety requirements Portable insulated domestic food containers 1.01 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1627:2007 (SABS 1627) SANS 1628-2:1998/ISO 1628-2:1998.02 Baker's compressed yeast 1.01 Electrodeposited coatings of gold and gold alloys for decorative and protective purposes Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 2: Poly(vinyl chloride) resins Batteries Part 1: General information .01 Page 73 .Definitions. Ed.02 Reconditioned manually operated chain hoists 1.02 Reconditioned pneumatically operated chain hoists 1.03 Automotive carpeting 2 DC-powered (battery-operated) machines for use in hazardous locations in mines Welding of thermoplastics .02 Dried yeast for use in wet sorghum beer brewing 1. abbreviations and symbols Batteries Part 2: Vented-type stationary lead-acid cells and batteries Batteries Part 3: Vented-type prismatic nickelcadmium cells and batteries Manually operated chain lever hoists 1 1.Industrial type 1.05 Battery chargers .Welding rods.01 2.01 1. fillers and solvents Bottled water of subterranean origin 1.01 1 Non-automatic self-indicating and semi-selfindicating weighing instruments Liquid fuel dispensers 1 1. IDT.01 1. 2 (SABS ISO 1628-2) SANS 1632-1:2005 (SABS 1632-1) SANS 1632-2:2005 (SABS 1632-2) SANS 1632-3:2005 (SABS 1632-3) SANS 1636:2007 (SABS 1636) SANS 1637:2008 (SABS 1637) SANS 1638:2008 (SABS 1638) SANS 1639:2008 (SABS 1639) SANS 1640:2008 (SABS 1640) SANS 1642:2007 (SABS 1642) SANS 1643:2007 (SABS 1643) SANS 1644:2007 (SABS 1644) SANS 1645:2009 (SABS 1645) SANS 1649:1995 (SABS 1649) SANS 1650:1995 (SABS 1650) SANS 1652:2008 (SABS 1652) SANS 1653:2008 (SABS 1653) SANS 1654:2009 (SABS 1654) SANS 1655:2004 (SABS 1655) SANS 1657:2009 (SABS 1657) Edition Title 1. 01 SANS 1670:2008 (SABS 1670) SANS 1671-1:2007 (SABS 1671-1) SANS 1671-2:2004 (SABS 1671-2) SANS 1671-3:2004 (SABS 1671-3) SANS 1671-4:2004 (SABS 1671-4) SANS 1671-6:2003 1. bromine or chlorine Disinfectants based on iodophors 1.01 Pasteurized milk 1.01 Fibre-reinforced plastics (FRP) tanks for buried (underground) storage for petroleum products Conveyor belt pulleys Part 1: Pulley types.Machines and equipment Part 4: Hot-gas extrusion welding Welding of thermoplastics . production.02 Verification standards for the verification of massmeasuring instruments. staking and insertion Disinfectants based on organic halogen compounds (other than iodine compounds).01 1 SANS 1673:2001 (SABS 1673) SANS 1674:2007 (SABS 1674) SANS 1675:2001 (SABS 1675) SANS 1678:2001 (SABS 1678) SANS 1679:2001 (SABS 1679) SANS 1697:2007 (SABS 1697) SANS 1698:2007 (SABS 1698) 1 1.01 1.01 Warning lights 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1658:2007 (SABS 1658) SANS 1659:2007 (SABS 1659) SANS 1660:2005 (SABS 1660) SANS 1661:2008 (SABS 1661) SANS 1668:2007 (SABS 1668) SANS 1669-1:2005 Edition Title 2 Ballistic resistance of body armour 1. such as fluorine. construction and dimensions Conveyor belt pulleys Part 2: Lagging 1 SANS 1669-2:2008 1.Machines and equipment Part 6: Ultrasonic welding.02 Page 74 .01 1.01 1.01 Welding of thermoplastics .Machines and equipment Part 3: Hot-gas welding Welding of thermoplastics . including commercial standard masspieces Verification standards for the verification of volumemeasuring instruments.Machines and equipment Part 1: Heated-tool welding Welding of thermoplastics: Machines and equipment Part 2: Electrofusion welding Welding of thermoplastics . including commercial standards of volume 1.02 The manufacture.01 1. processing and treatment of canned meat products Sterilized milk 1.01 Aluminium master alloys for remelting 2 Correction fluids 2 Cord extension sets 1. 1 Edition Title 1 Fasteners Part 1: Terminology and nomenclature Section 1: Bolts. Ed. IDT. Ed. IDT. IDT.Selected sizes for screws. Ed. 2 1 SANS 1700-2-3:2003/ISO 262:1998. 1 (SABS 1700-2-15) SANS 1700-2-16:1996/ISO 2903:1993.Gauges and gauging Fasteners Part 2: Screw threads Section 10: ISO inch screw threads . Ed.Tolerances Limits of sizes for general purpose external and internal screw threads . IDT. 3 (SABS 1700-2-6) 1 2 2 SANS 1700-2-7:2003/ISO 965-3:1998. Ed.Basic dimensions Fasteners Part 2: Screw threads Section 18: ISO general purpose screw threads . IDT. Ed. Ed.Allowances and tolerances Fasteners Part 2: Screw threads Section 13: Tapping screws thread Fasteners Part 2: Screw threads Section 14: ISO metric trapezoidal screw threads . Ed. Ed. Ed. 1 (SABS 1700-1-2) SANS 1700-2-1:2003/ISO 68-1:1998.Tolerances Deviations for constructional screw threads Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads Fasteners Part 2: Screw threads Section 9: ISO general-purpose metric screw threads . 1 (SABS 1700-2-17) SANS 1700-2-18:2003/ISO 68-2:1998.06 to 6 in Fasteners Part 2: Screw threads Section 12: ISO inch screw threads . Ed. IDT. Ed.General plan and selection for screws. IDT. 2 (SABS 1700-2-4) SANS 1700-2-5:2003/ISO 965-1:1998. 1 (SABS 1700-1-1) SANS 1700-1-2:1996/ISO 5408:1983. Ed. IDT. 2 (SABS 1700-2-12) SANS 1700-2-13:2003/ISO 1478:1999. 2 (SABS 1700-2-14) SANS 1700-2-15:1996/ISO 2902:1977. 2 (SABS 1700-2-16) SANS 1700-2-17:1996/ISO 2904:1977. nuts and accessories Fasteners Part 1: Terminology and nomenclature Section 2: Cylindrical screw threads Fasteners Part 2: Screw threads Section 1: ISO general purpose screw threads .Inch screw threads 1 1 SANS 1700-2-2:2003/ISO 261:1998. Ed. Ed. Ed. IDT. 2 (SABS 1700-2-13) SANS 1700-2-14:1996/ISO 2901:1993. IDT. IDT.Medium quality Fasteners Part 2: Screw threads Section 7: ISO general purpose metric screw threads . 2 1 SANS 1700-2-4:1996/ISO 724:1993. IDT. IDT. Ed. 2 (SABS 1700-2-9) SANS 1700-2-10:1996/ISO 263:1973. 3 (SABS 1700-2-7) SANS 1700-2-8:2009/ISO 1501:2009.Basic profile Metric screw threads Fasteners Part 2: Screw threads Section 2: ISO general purpose metric screw threads . 1 (SABS 1700-2-10) SANS 1700-2-12:1996/ISO 5864:1993. Ed. bolts and nuts .Tolerances Fasteners Part 2: Screw threads Section 17: ISO metric trapezoidal screw threads .Tolerances Principles and basic data Fasteners Part 2: Screw threads Section 6: ISO general purpose metric screw threads .General plan Fasteners Part 2: Screw threads Section 16: ISO metric trapezoidal screw threads .Basic profile .Basic profile and maximum material profiles Fasteners Part 2: Screw threads Section 15: ISO metric trapezoidal screw threads . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-1-1:1996/ISO 1891:1979. screws. IDT.Diameter range 0. 3 (SABS 1700-2-5) SANS 1700-2-6:2003/ISO 965-2:1998. 1 (SABS 1700-2-8) SANS 1700-2-9:1996/ISO 1502:1996. IDT. IDT.General plan Fasteners Part 2: Screw threads Section 3: ISO general purpose metric screw threads . IDT. 1 2 2 1 1 1 2 1 1 1 1 1 Page 75 . Ed. bolts and nuts Fasteners Part 2: Screw threads Section 4: ISO general-purpose metric screw threads . IDT.Basic dimensions Fasteners Part 2: Screw threads Section 5: ISO general purpose metric screw threads . Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-2-19:2003/ISO 965-4:1998. Ed. dimensions and designations Section 13: Designation system for fasteners SANS 1700-2-20:2003/ISO 965-5:1998. IDT. IDT. dimensions and designations Section 8: Thread undercuts for external metric ISO threads Fasteners Part 3: Forms. 1 1 SANS 1700-2-21:2004/ISO 5855-1:1999. Ed. Ed. IDT. 2 (SABS 1700-3-2) SANS 1700-3-3:1996/ISO 273:1979. dimensions and designations Section 2: Hexagon products . Ed. Ed. dimensions and designations Section 9: Cross recesses for screws Fasteners Part 3: Forms.MJ threads .Penetration depth of cross recesses Fasteners Part 3: Forms. Ed. IDT.MJ threads .Radii under the head Fasteners Part 3: Forms. IDT. Ed. IDT. 1 (SABS 1700-3-6) 1 SANS 1700-3-7:2003/ISO 4753:1999. 1 Edition Title 1 Fasteners Part 2: Screw threads Section 19: ISO general purpose metric screw threads . IDT. 3 1 SANS 1700-3-1:1996/ISO 225:1983. 2 (SABS 1700-3-4) SANS 1700-3-5:1996/ISO 888:1976. Ed. Ed. IDT. dimensions and designations Section 10: Bolts.Ends of parts with external ISO metric thread Fasteners Part 3: Forms. dimensions and designations Section 1: Bolts. Ed. dimensions and designations Section 4: General purpose bolts and screws .Tolerances Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing Fasteners Part 2: Screw threads Section 20: ISO general purpose metric screw threads .Widths across flats Fasteners Part 3: Forms. IDT. 1 (SABS 1700-3-5) 1 1 1 2 1 SANS 1700-3-6:1996/ISO 3508:1976. 1 (SABS 1700-3-11) SANS 1700-3-12:1996/ISO 7721-2:1990. Ed. screws.Symbols and designations of dimensions Fasteners Part 3: Forms.Tolerances Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing Fasteners Part 2: Screw threads Section 21: Aerospace . Ed.Head configuration and gauging Fasteners Part 3: Forms. IDT. IDT. IDT. Ed. IDT.Limit dimensions for bolts and nuts Fasteners Part 3: Forms. dimensions and designations Section 5: Bolts. IDT. screws and studs Nominal lengths. and thread lengths for general purpose bolts Fasteners Part 3: Forms. dimensions and designations Section 7: Fasteners . dimensions and designations Section 6: Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 Fasteners Part 3: Forms. dimensions and designations Section 3: Clearance holes for bolts and screws Fasteners Part 3: Forms. 3 1 SANS 1700-2-22:2004/ISO 5855-2:1999. dimensions and designations Section 11: Countersunk head screws . dimensions and designations Section 12: Countersunk flat head screws . 1 (SABS 1700-3-13) 2 1 1 1 1 1 1 Page 76 . 2 (SABS 1700-3-1) SANS 1700-3-2:1996/ISO 272:1982. Ed. Ed. 1 (SABS 1700-3-3) SANS 1700-3-4:2003/ISO 885:2000. 2 (SABS 1700-3-7) SANS 1700-3-8:1996/ISO 4755:1983. 1 (SABS 1700-3-9) SANS 1700-3-10:1996/ISO 7378:1983. 1 (SABS 1700-3-8) SANS 1700-3-9:1996/ISO 4757:1983. IDT. Ed. screws and studs Split pin holes and wire holes Fasteners Part 3: Forms. IDT. IDT. 1 (SABS 1700-3-10) SANS 1700-3-11:1996/ISO 7721:1983. Ed. studs and nuts . 1 (SABS 1700-3-12) SANS 1700-3-13:1996/ISO 8991:1986.General requirements Fasteners Part 2: Screw threads Section 22: Aerospace .Metric series . 2 (SABS 1700-5-2) SANS 1700-5-3:2003/ISO 898-5:1998. IDT. Ed. 1 (SABS 1700-5-14) SANS 1700-5-15:2008/ISO 8992:2005. screws. 3 (SABS 1700-4-3) SANS 1700-5-1:2003/ISO 898-1:1999.01 SANS 1700-5-11:2003/ISO 4042:1999. IDT. 2 (SABS 1700-5-15) 1 2 Page 77 . IDT. Ed. IDT. Ed. screws and studs for special requirements Fasteners Part 5: General requirements and mechanical properties Section 14: Bolts.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-4-1:2003/ISO 4759-1:2000. 2 (SABS 1700-5-4) SANS 1700-5-5:2003/ISO 2320:1997. studs and nuts made of non-ferrous metals Fasteners Part 5: General requirements and mechanical properties Section 15: Bolts. studs and nuts Product grades A. IDT. studs and nuts 2 2 SANS 1700-5-2:1996/ISO 898-2:1992.Nuts Fasteners Part 5: General requirements and mechanical properties Section 10: Mechanical properties of corrosion-resistant stainless-steel fasteners .Set screws and similar threaded fasteners not under tensile stresses Fasteners Part 5: General requirements and mechanical properties Section 4: Nuts with specified proof load values .Bolts.Mechanical and performance properties Fasteners Part 5: General requirements and mechanical properties Section 6: Heat-treated steel tapping screws Fasteners Part 5: General requirements and mechanical properties Section 8: Mechanical properties of corrosion-resistant stainless-steel fasteners .Coarse thread Fasteners Part 5: General requirements and mechanical properties Section 3: Mechanical properties of fasteners made of carbon steel and alloy steel . 3 (SABS 1700-5-5) 1 1. IDT. screws and studs Fasteners Part 5: General requirements and mechanical properties Section 2: Nuts with specified proof load values .01 SANS 1700-5-10:2003/ISO 3506-3:1997. Ed.Set screws and similar fasteners not under tensile stress Fasteners Part 5: General requirements and mechanical properties Section 11: Electroplated coatings Fasteners Part 5: General requirements and mechanical properties Section 12: Surface discontinuities . 1 (SABS 1700-5-10) 1. B and C Fasteners Part 4: Tolerances Section 3: Tolerances for fasteners . 2 (SABS 1700-5-3) 1 2 SANS 1700-5-4:1996/ISO 898-6:1994. IDT. screws. screws and studs for general requirements Fasteners Part 5: General requirements and mechanical properties Section 13: Surface discontinuities .Bolts.01 SANS 1700-5-9:2003/ISO 3506-2:1997. Ed.Fine pitch thread Fasteners Part 5: General requirements and mechanical properties Section 5: Prevailing torque type steel hexagon nuts . Ed. 1 (SABS 1700-5-9) 1. 3 (SABS 1700-5-1) Edition Title 2 Fasteners Part 4: Tolerances Section 1: Tolerances for fasteners . Ed. IDT. 2 (SABS 1700-5-11) SANS 1700-5-12:1996/ISO 6157-1:1988. 2 (SABS 1700-4-1) SANS 1700-4-3:2003/ISO 4759-3:2000. Ed. IDT. Ed. 1 (SABS 1700-5-8) 1 1. IDT. IDT. IDT. screws and studs Fasteners Part 5: General requirements and mechanical properties Section 9: Mechanical properties of corrosion-resistant stainless-steel fasteners . screws and nuts .Bolts. Ed. Ed.Product grades A and C Fasteners Part 5: General requirements and mechanical properties Section 1: Mechanical properties of fasteners made of carbon steel and alloy steel .Plain washers for bolts.Bolts. Ed.01 SANS 1700-5-6:1996/ISO 2702:1992. screws. Ed.Bolts. Ed. IDT. Ed. 1 (SABS 1700-5-13) 1 SANS 1700-5-14:1996/ISO 8839:1986. 1 (SABS 1700-5-12) 2 1 SANS 1700-5-13:1996/ISO 6157-3:1988. IDT. IDT. Ed. 2 (SABS 1700-5-6) SANS 1700-5-8:2003/ISO 3506-1:1997. IDT. Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-5-16:2003/ISO 10666:1999. Ed. IDT. IDT. IDT.Product grades A and B Fasteners Part 7: External drive hexagon bolts and screws Section 2: Hexagon head bolts . 1 1 Page 78 . IDT. IDT. Ed. Ed. 1 (SABS 1700-6-3) 2 1 SANS 1700-6-4:1996/ISO 8749:1986.8 and 10.Parallel bearing surface method Fasteners Part 7: External drive hexagon bolts and screws Section 1: Hexagon head bolts . 1 Edition Title 1 Fasteners: Part 5: General requirements and mechanhical properties Section 16: Drilling screws with tapping screw thread . IDT. 1 1 SANS 1700-7-8:2003/ISO 7412:1984. IDT. IDT. 1 (SABS 1700-7-2) 2 1 SANS 1700-7-3:2003/ISO 4016:1999. 1 (SABS 1700-6-5) SANS 1700-6-6:2003/ISO 15330:1999. Ed. Ed.Product grade C Fasteners Part 7: External drive hexagon bolts and screws Section 6: Hexagon flange bolts .Acceptance inspection Fasteners Part 6: Testing and acceptance inspection Section 3: Threaded fasteners .Product grade C . Ed. Ed.Property classes 8. 3 (SABS 1700-7-1) SANS 1700-7-2:1996/ISO 4015:1979. 1 1 SANS 1700-6-2:2003/ISO 3269:2000. Ed. 3 (SABS 1700-7-3) SANS 1700-7-4:2003/ISO 4017:1999. 1 1 1 1 SANS 1700-7-1:2003/ISO 4014:1999.Property classes 8.Reduced shank (shank diameter approximately equal to pitch diameter) Fasteners Part 7: External drive hexagon bolts and screws Section 3: Hexagon head bolts . Ed. Ed. IDT.Product grade B . 1 1 SANS 1700-5-18:2003/ISO 10683:2000. Ed.Small series Fasteners Part 7: External drive hexagon bolts and screws Section 7: Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to SABS ISO 888) . Ed. IDT. IDT.Product grade C .Shear test Fasteners Part 6: Testing and acceptance inspection Section 5: Widening test on nuts Fasteners Part 6: Testing and acceptance inspection Section 6: Fasteners .Nonelectrolytically applied zinc flake coatings Fasteners Part 6: Testing and acceptance inspection Section 2: Fasteners . Ed.Test methods and evaluation of results Fasteners Part 6: Testing and acceptance inspection Section 4: Pins and grooved pins . Ed.Preloading test for the detection of hydrogen embrittlement . IDT. IDT. 3 (SABS 1700-7-5) SANS 1700-7-6:2003/ISO 4162:1990.Product grade C Fasteners Part 7: External drive hexagon bolts and screws Section 4: Hexagon head screws .8 and 10. 1 2 2 2 1 SANS 1700-7-7:2003/ISO 7411:1984. IDT.Product grades A and B Fasteners Part 7: External drive hexagon bolts and screws Section 5: Hexagon head screws . 3 (SABS 1700-6-2) SANS 1700-6-3:1996/ISO 3800:1993. IDT.9 Fasteners Part 7: External drive hexagon bolts and screws Section 8: Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) .Axial load fatigue testing . 1 (SABS 1700-6-4) SANS 1700-6-5:1998/ISO 10484:1997. IDT.Mechanical and functional properties Fasteners Part 5: General requirements and mechanical properties Section 17: Mechanical and performance requirements of case hardened and tempered metric thread rolling screws Fasteners Part 5: General requirements and mechanical properties Section 18: Fasteners . 3 (SABS 1700-7-4) SANS 1700-7-5:2003/ISO 4018:1999. Ed.9 SANS 1700-5-17:2003/ISO 7085:1999. Ed. 1 1 SANS 1700-8-2:1996/ISO 8678:1988. 2 (SABS 1700-10-2) SANS 1700-10-3:1996/ISO 2009:1994. Ed.Product grade A Fasteners Part 11: Countersunk flat head screws(common head style) with type H or type Z cross recess . 1 (SABS 1700-8-2) SANS 1700-9-1:2008/ISO 4762:2004.Product grade A Fasteners Part 7: External drive hexagon bolts and screws Section 12: Hexagon bolts with flange with metric fine pitch thread . IDT. IDT. Ed. IDT. IDT.Grade A Section 3: Steel of property class 8. 1 (SABS 1700-11-3) 1 SANS 1700-11-4:1996/ISO 7047:1994.Product grade A 2 1 SANS 1700-7-12:2003/ISO 15072:1999. IDT. 2 (SABS 1700-11-1) 1 1 1 1 1 SANS 1700-11-2:1996/ISO 7046-1:1994.Product grade A Fasteners Part 10: Slotted head screws . Ed. 2 1 2 1 2 2 2 SANS 1700-10-1:1996/ISO 1207:1992.Section 3: Slotted countersunk flat head screws (common head style) .Product grades A and B Fasteners Part 7: External drive hexagon bolts and screws Section 10 : Hexagon head bolts with metric fine pitch thread . 1 (SABS 1700-9-2) SANS 1700-9-3:2008/ISO 7380:2004. IDT. 3 (SABS 1700-10-3) SANS 1700-10-4:1996/ISO 2010:1994. IDT. Ed. IDT. Ed.Product grade A Section 2: Steel of property class 4.8 Fasteners Part 11: Cross recessed countersunk flat head screws (common head style) . 2 (SABS 1700-7-9) SANS 1700-7-10:2003/ISO 8765:1999.8. 1 Edition Title 2 Fasteners Part 7: External drive hexagon bolts and screws Section 9: Hexagon head screws with metric fine pitch thread . IDT. Ed. IDT. 2 (SABS 1700-9-4) SANS 1700-9-5:2008/ISO 10664:2005. Ed. IDT. Ed.Product grades A and B Fasteners Part 7: External drive hexagon bolts and screws Section 11: Hexagon bolts with flange Small series . Ed. 3 (SABS 1700-10-4) SANS 1700-11-1:1996/ISO 7045:1994. Ed. 2 (SABS 1700-11-4) 1 Page 79 . Ed. IDT.Product grade A Fasteners Part 10: Slotted head screws Section 4: Countersunk slotted raised head screws (common head style) . Ed. Ed. stainless steel and non-ferrous metals Fasteners Part 11: Cross recessed head screws Section 4: Countersunk raised head screws (common head style) with type H or type Z cross recess . 1 (SABS 1700-11-2) 1 SANS 1700-11-3:1996/ISO 7046-2:1990. 4 (SABS 1700-9-1) SANS 1700-9-2:1996/ISO 7379:1983.Product grade A Fasteners Part 10: Slotted head screws Section 2: Slotted pan head screws . IDT. IDT. IDT.Small series . Ed. 3 (SABS 1700-10-1) SANS 1700-10-2:1996/ISO 1580:1994.Grade A Section 1: Pan head screws with type H or type Z cross recess .Product grade A Fasteners Part 11: Cross recessed countersunk flat head screws (common head style) .Product grade B Fasteners Part 9: Hexagon socket head screws Section 1: Hexagon socket head cap screws Fasteners Part 9: Hexagon socket head screws Section 2: Hexagon socket head shoulder screws Fasteners Part 9: Hexagon socket head screws Section 3: Hexagon socket button head screws Fasteners Part 9: Hexagon socket head screws Section 4: Hexagon socket countersunk head screws Fasteners Part 9: Hexagon socket head screws Section 5: Hexalobular internal driving feature for bolts and screws Fasteners Part 10: Slotted head screws Section 1: Slotted cheese head screws . IDT. Ed. IDT. 2 (SABS 1700-7-10) SANS 1700-7-11:2003/ISO 15071:1999.Product grade A Fasteners Part 8: Square neck bolts Section 2: Cup head square neck bolts with small head and short neck .Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-7-9:2003/ISO 8676:1999. Ed. IDT. Ed. 3 (SABS 1700-9-3) SANS 1700-9-4:2008/ISO 10642:2004. Ed. IDT. Ed. Ed. Ed. IDT. Ed. IDT. Ed. IDT. 2 (SABS 1700-12-1) SANS 1700-12-2:2004/ISO 4026:2003. Ed. Ed. Ed. 1 Edition Title 1 Fasteners Part 11: Cross recessed head screws Section 5: Cross recessed cheese head screws Fasteners Part 12: Set screws Section 1: Slotted headless screws with shank Fasteners Part 12: Set screws Section 2: Hexagon socket set screws with flat point Fasteners Part 12: Set screws Section 3: Hexagon socket set screws with cone point Fasteners Part 12: Set screws Section 4: Hexagon socket set screws with dog point Fasteners Part 12: Set screws Section 5: Hexagon socket set screws with cup point Fasteners Part 12: Set screws Section 6: Slotted set screws with flat point Fasteners Part 12: Set screws Section 7: Slotted set screws with cone point Fasteners Part 12: Set screws Section 8: Slotted set screws with long dog point Fasteners Part 12: Set screws Section 9: Slotted set screws with cup point Fasteners Part 13: Tapping screws Section 1: Hexagon head tapping screws Fasteners Part 13: Tapping screws Section 2: Slotted pan head tapping screws Fasteners Part 13: Tapping screws Section 3: Slotted countersunk (flat) head tapping screws (common head style) Fasteners Part 13: Tapping screws Section 4: Slotted raised countersunk (oval) head tapping screws (common head style) Fasteners Part 13: Tapping screws Section 5: Cross recessed pan head tapping screws Fasteners Part 13: Tapping screws Section 6: Cross recessed countersunk (flat) head tapping screws (common head style) Fasteners Part 13: Tapping screws Section 7: Cross recessed raised countersunk (oval) head tapping screws Fasteners Part 13: Tapping screws Section 8: Tapping screw and washer assemblies with plain washers Fasteners Part 13: Tapping screws Section 9: Hexagon washer head drilling screws with tapping screw thread Fasteners Part 13: Tapping screws Section 10: Cross recessed pan head drilling screws with tapping screw thread SANS 1700-12-1:2004/ISO 2342:2003. IDT. IDT. 3 (SABS 1700-12-4) SANS 1700-12-5:2004/ISO 4029:2003. Ed. IDT. IDT. 1 (SABS 1700-13-4) SANS 1700-13-5:1996/ISO 7049:1983. IDT. IDT. 1 (SABS 1700-13-6) SANS 1700-13-7:1996/ISO 7051:1983. Ed. IDT. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-11-5:2003/ISO 7048:1998. 1 (SABS 1700-13-2) SANS 1700-13-3:1996/ISO 1482:1983. IDT. 1 (SABS 1700-13-7) SANS 1700-13-8:2003/ISO 10510:1999. 1 (SABS 1700-13-1) SANS 1700-13-2:1996/ISO 1481:1983. IDT. 1 (SABS 1700-13-3) SANS 1700-13-4:1996/ISO 1483:1983. 1 (SABS 1700-12-7) SANS 1700-12-8:1996/ISO 7435:1983. 1 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 SANS 1700-13-9:2003/ISO 15480:1999. IDT. 1 (SABS 1700-12-6) SANS 1700-12-7:1996/ISO 7434:1983. IDT. IDT. 1 (SABS 1700-12-8) SANS 1700-12-9:1996/ISO 7436:1983. Ed. 1 1 SANS 1700-13-10:2003/ISO 15481:1999. 3 (SABS 1700-12-2) SANS 1700-12-3:2009/ISO 4027:2003. IDT. 3 (SABS 1700-12-3) SANS 1700-12-4:2004/ISO 4028:2003. Ed. Ed. Ed. 1 (SABS 1700-12-9) SANS 1700-13-1:1996/ISO 1479:1983. Ed. 1 (SABS 1700-13-5) SANS 1700-13-6:1996/ISO 7050:1983. IDT. Ed. 3 (SABS 1700-12-5) SANS 1700-12-6:1996/ISO 4766:1983. 1 1 Page 80 . Ed. Ed. Ed. IDT. Product grade B Fasteners Part 14: Hexagon nuts Section 6: Hexagon nuts with flange . style 2 .Product grade B .Product grades A and B Fasteners Part 14: Hexagon nuts Section 3: Hexagon nuts . IDT. style 1. Ed. hot-dip galvanized (oversize tapped) . IDT. 1 1 SANS 1700-14-9:1996/ISO 7413:1984.Property class 10 Fasteners Part 14: Hexagon nuts Section 11: Hexagon nuts for structural bolting. style 1. Ed. Ed. Ed. Ed. style 1 . Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-13-11:2003/ISO 15482:1999. IDT. Ed. 6 and 8 Fasteners Part 14: Hexagon nuts Section 10: Hexagon nuts for structural bolting with large width across flats. 1 (SABS 1700-14-9) 1 SANS 1700-14-10:2003/ISO 7414:1984.Product grades A and B Fasteners Part 14: Section 5: Hexagon thin nuts (unchamfered) . IDT.Property classes 5.Product grades A and B . style 2. with metric fine pitch thread Product grades A and B Fasteners Part 14: Hexagon nuts Section 13: Hexagon nuts. style 1 . Ed. 2 (SABS 1700-15-1) 1 Page 81 . 2 (SABS 1700-14-12) SANS 1700-14-13:2003/ISO 8674:1999. Ed.Coarse thread Fasteners Part 14: Hexagon nuts Section 8: Hexagon nuts for high-strength structural bolting with large width across flats . 2 (SABS 1700-14-2) SANS 1700-14-3:2003/ISO 4034:1999. IDT. IDT. IDT. Ed. 3 (SABS 1700-14-4) SANS 1700-14-5:2003/ISO 4036:1999. 1 1 SANS 1700-14-12:2003/ISO 8673:1999. hot-dip galvanized (oversize tapped) . Ed.Product grade C Fasteners Part 14: Hexagon nuts Section 4: Hexagon thin nuts (chamfered) . IDT. IDT.Product grades A and B Fasteners Part 14: Hexagon nuts Section 15: Hexagon nuts with flange .Fine pitch thread Fasteners Part 15: Prevailing torque type nuts Section 1: Prevailing torque type hexagon nuts (with non-metallic insert). IDT. IDT. 2 (SABS 1700-14-13) SANS 1700-14-14:2003/ISO 8675:1999. IDT. 3 (SABS 1700-14-3) SANS 1700-14-4:2003/ISO 4035:1999. 2 (SABS 1700-14-14) SANS 1700-14-15:2003/ISO 10663:1999. 1 2 2 2 1 SANS 1700-15-1:1998/ISO 7040:1997.Product grades A and B Fasteners Part 14: Hexagon nuts Section 2: Hexagon nuts. 8 and 10 SANS 1700-13-12:2003/ISO 15483:1999. IDT. Ed. IDT.Product grade A Property class 9 Fasteners Part 14: Hexagon nuts Section 12: Hexagon nuts. 3 (SABS 1700-14-1) SANS 1700-14-2:2003/ISO 4033:1999. with metric fine pitch thread Product grades A and B Fasteners Part 14: Hexagon nuts Section 14: Hexagon thin nuts (chamfered) with metric fine pitch thread . IDT.Property classes 5. Ed. Ed. 1 1 SANS 1700-14-1:2003/ISO 4032:1999. 2 2 2 2 2 2 1 SANS 1700-14-8:2003/ISO 4775:1984. Style 2.Product grade B Property classes 8 and 10 Fasteners Part 14: Hexagon nuts Section 9: Hexagon nuts for structural bolting. 1 1 SANS 1700-14-11:2003/ISO 7417:1984. Ed. IDT. Ed. style 1 . Ed. 1 Edition Title 1 Fasteners Part 13: Tapping screws Section 11: Cross recessed countersunk head drilling screws with tapping screw thread Fasteners Part 13: Tapping screws Section 12: Cross recessed raised countersunk head drilling screws with tapping screw thread Fasteners Part 14: Hexagon nuts Section 1: Hexagon nuts. IDT. 2 (SABS 1700-14-5) SANS 1700-14-6:2003/ISO 4161:1999. IDT. IDT.Product grades A and B Fasteners Part 15: Prevailing torque type nuts Section 12: Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread Product grades A and B Fasteners Part 16: Washers Section 1: Plain washers for metric bolts. 1 (SABS 1700-15-9) 1 1 1 1 1 SANS 1700-15-10:1998/ISO 10513:1997. Ed. style 1. style 2 .Product grade C Fasteners Part 16: Washers Section 5: Plain washers .Product grade A Fasteners Part 16: Washers Section 4: Plain washers . 10 and 12 Fasteners Part 15: Prevailing torque type nuts Section 4: Prevailing torque type hexagon nuts with flange (with non-metallic insert) . 2 (SABS 1700-15-6) SANS 1700-15-7:1998/ISO 7720:1997. 2 (SABS 1700-15-7) SANS 1700-15-8:1998/ISO 10511:1997. IDT. IDT. 2 1 SANS 1700-16-3:2003/ISO 7090:2000. IDT.Property classes 5. 1 (SABS 1700-15-11) 1 SANS 1700-15-12:1998/ISO 12126:1997.Property class 9 Fasteners Part 15: Prevailing torque type nuts Section 8: Prevailing torque type hexagon thin nuts (with non-metallic insert) Fasteners Part 15: Prevailing torque type nuts Section 9: Prevailing torque type hexagon nuts (with non-metallic insert). Ed. IDT. IDT. screws and nuts for general purposes . Ed. IDT.Small series . Ed. 2 (SABS 1700-15-3) SANS 1700-15-4:1998/ISO 7043:1997. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-15-2:2007/ISO 7041:2002. 1 (SABS 1700-15-10) 1 SANS 1700-15-11:1998/ISO 12125:1997. style 2. Ed. Ed. style 1 . 8 and 10 Fasteners Part 15: Prevailing torque type nuts Section 10: Prevailing torque type all-metal hexagon nuts. Ed. 1 (SABS 1700-15-12) 1 SANS 1700-16-1:2003/ISO 887:2000. 1 (SABS 1700-16-6) 2 Page 82 . Ed. Ed. Ed.General plan Fasteners Part 16: Washers Section 2: Plain washers . chamfered .Large series . IDT. IDT. IDT. 1 (SABS 1700-15-8) SANS 1700-15-9:1998/ISO 10512:1997. 8 and 10 Fasteners Part 15: Prevailing torque type nuts Section 7: Prevailing torque type all-metal hexagon nuts.Normal series . Ed. style 2 . 3 (SABS 1700-15-2) Edition Title 2 Fasteners Part 15: Prevailing torque type nuts Section 2: Prevailing torque type hexagon nuts (with non-metallic insert).Property classes 5.Product grade A Fasteners Part 16: Washers Section 3: Plain washers. 10 and 12 Fasteners Part 15: Prevailing torque type nuts Section 11: Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread . 2 1 SANS 1700-16-5:2003/ISO 7092:2000.Product grades A and B Fasteners Part 15: Prevailing torque type nuts Section 5: Prevailing torque type all-metal hexagon nuts with flange . IDT. IDT.Normal series . Ed. IDT.Product grades A and B Fasteners Part 15: Prevailing torque type nuts Section 6: Prevailing torque type all-metal hexagon nuts. 2 (SABS 1700-15-4) 1 1 SANS 1700-15-5:1998/ISO 7044:1997. 8.Property classes 8. Ed. IDT. Ed. Ed. 2 1 SANS 1700-16-4:2003/ISO 7091:2000.Property classes 6.Product grade A SANS 1700-15-3:1998/ISO 7042:1997.Product grade A Fasteners Part 16: Washers Section 6: Plain washers . with metric fine pitch thread . with metric fine pitch thread . style 2 . 2 (SABS 1700-15-5) SANS 1700-15-6:1998/ISO 7719:1997. Ed. IDT. IDT.Normal series . 2 1 SANS 1700-16-2:2003/ISO 7089:2000. 2 1 SANS 1700-16-6:2003/ISO 7093-1:2000.Property classes 9 and 12 Fasteners Part 15: Prevailing torque type nuts Section 3: Prevailing torque type all-metal hexagon nuts. 1 (SABS 1700-17-10) SANS 1700-17-11:1998/ISO 8739:1997. 2 (SABS 1700-17-4) SANS 1700-17-5:1996/ISO 2341:1986. Ed.Product grade C Fasteners Part 16: Washers Section 8: Plain washers for high-strength structural bolting. IDT. Ed. IDT. 2 (SABS 1700-16-7) SANS 1700-16-8:2004/ISO 7415:1984. 1 Edition Title 2 Fasteners Part 16: Washers Section 7: Plain washers . Ed. IDT. hardened. IDT. IDT. Ed. unhardened Fasteners Part 17: Pins Section 11: Grooved pins Full-length parallel grooved. 2 (SABS 1700-17-1) SANS 1700-17-2:1998/ISO 2338:1997. normal and large series . Ed. 1 1 SANS 1700-16-15:2003/ISO 10644:1998. of hardened steel and martensitic stainless steel Fasteners Part 17: Pins Section 9: Taper pins with internal thread. Ed. hardened and tempered Fasteners Part 16: Washers Section 9: Plain washers. of unhardened steel and austenitic stainless steel Fasteners Part 17: Pins Section 7: Parallel pins. with pilot Fasteners Part 17: Pins Section 12: Grooved pins Full-length parallel grooved.Washer hardness classes 200 HV and 300 HV Fasteners Part 16: Washers Section 16: Plain washers for tapping screw and washer assemblies Normal and large series .Product grade C Fasteners Part 16: Washers Section 15: Screw and washer assemblies with plain washers . unhardened Fasteners Part 17: Pins Section 10: Taper pins with external thread. with chamfer 1 1 1 1 1 1 1 1 1 1 Page 83 . of hardened steel and martensitic stainless steel (Dowel pins) Fasteners Part 17: Pins Section 8: Parallel pins with internal thread. 2 (SABS 1700-17-6) SANS 1700-17-7:1998/ISO 8734:1997.Product grade A Fasteners Part 16: Washers Section 14: Plain washers . IDT. 2 (SABS 1700-17-2) SANS 1700-17-3:1996/ISO 2339:1986. 2 (SABS 1700-17-12) 1 1 Fasteners Part 17: Pins Section 2: Parallel pins. IDT. 2 (SABS 1700-17-5) SANS 1700-17-6:1998/ISO 8733:1997. Ed. and tempered for high-strength structural bolting Fasteners Part 16: Washers Section 10: Plain washers for clevis pins . IDT. IDT. unhardened Fasteners Part 17: Pins Section 4: Clevis pins without head Fasteners Part 17: Pins Section 5: Clevis pins with head Fasteners Part 17: Pins Section 6: Parallel pins with internal thread. IDT. Ed. 2 (SABS 1700-17-11) SANS 1700-17-12:1998/ISO 8740:1997. 1 1 SANS 1700-16-16:2003/ISO 10669:1999. Ed. Ed. 1 (SABS 1700-16-10) 1 SANS 1700-16-14:2003/ISO 7093-2:2000. 1 1 SANS 1700-16-17:2003/ISO 10673:1998. Ed. IDT. Ed. Ed. IDT. 1 1 SANS 1700-17-1:1998/ISO 1234:1997. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-16-7:2003/ISO 7094:2000. IDT. 2 (SABS 1700-17-8) SANS 1700-17-9:1996/ISO 8736:1986. IDT. IDT. Ed. Ed. IDT. chamfered.Product grade A Fasteners Part 17: Pins Section 1: Split pins 1 SANS 1700-16-9:2004/ISO 7416:1984. Ed.Extra large series . IDT. IDT. Ed. Ed.Small. 2 (SABS 1700-17-3) SANS 1700-17-4:1996/ISO 2340:1986. Ed. of unhardened steel and austenitic stainless steel Fasteners Part 17: Pins Section 3: Taper pins. 1 1 SANS 1700-16-10:1996/ISO 8738:1986. 2 (SABS 1700-17-7) SANS 1700-17-8:1998/ISO 8735:1997. IDT. IDT. 1 (SABS 1700-17-9) SANS 1700-17-10:1996/ISO 8737:1986.Product grade A Fasteners Part 16: Washers Section 17: Plain washers for screw and washer assemblies .Large series . IDT. 2 (SABS 1700-17-20) SANS 1700-17-21:1998/ISO 8750:1997.AIA/St Fasteners Part 18: Rivets Section 5: Closed end blind rivets with break pull mandrel and countersunk head .Coiled. IDT. IDT. 2 (SABS 1700-17-17) SANS 1700-17-18:1998/ISO 8746:1997.Coiled. 2 (SABS 1700-17-21) SANS 1700-17-22:1998/ISO 8751:1997. Ed. Ed. Ed. Ed. IDT. Ed. 2 (SABS 1700-17-13) SANS 1700-17-14:1998/ISO 8742:1997. Ed. 1 (SABS 1700-17-24) SANS 1700-18-1:2003/ISO 1051:1999. IDT. Ed. heavy duty Fasteners Part 17: Pins Section 24: Spring-type straight pins . 2 (SABS 1700-17-19) SANS 1700-17-20:1998/ISO 8748:1997. 2 (SABS 1700-17-15) SANS 1700-17-16:1998/ISO 8744:1997. Ed. IDT. 1 1 Page 84 . 1 1 SANS 1700-18-4:2004/ISO 15973:2000. 1 (SABS 1700-18-1) SANS 1700-18-2:2004/ISO 14588:2000. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-17-13:1998/ISO 8741:1997. Ed. IDT. IDT.Slotted.Coiled. heavy duty Fasteners Part 17: Pins Section 21: Spring-type straight pins . Ed. IDT. Ed.St/St Fasteners Part 18: Rivets Section 8: Open end blind rivets with break pull mandrel and protruding head AIA/St 1 1 1 1 1 1 1 1 1 1 1 2 1 SANS 1700-18-3:2004/ISO 14589:2000. Ed. 2 (SABS 1700-17-16) SANS 1700-17-17:1998/ISO 8745:1997.Slotted. 1 1 SANS 1700-18-5:2004/ISO 15974:2000. 2 (SABS 1700-17-14) SANS 1700-17-15:1998/ISO 8743:1997. IDT. IDT. IDT. 1 1 SANS 1700-18-7:2004/ISO 15976:2002. IDT. Ed. Ed. 1 1 SANS 1700-18-8:2004/ISO 15977:2002. IDT. light duty Fasteners Part 18: Rivets Section 1: Rivet shank diameters Fasteners Part 18: Rivets Section 2: Blind rivets Terminology and definitions Fasteners Part 18: Rivets Section 3: Blind rivets Mechanical testing Fasteners Part 18: Rivets Section 4: Closed end blind rivets with break pull mandrel and protruding head . IDT. Ed.AI/AIA Fasteners Part 18: Rivets Section 7: Closed end blind rivets with break pull mandrel and protruding head . 1 Edition Title 1 Fasteners Part 17: Pins Section 13: Grooved pins Half-length reverse-taper grooved Fasteners Part 17: Pins Section 14: Grooved pins One-third-length centre grooved Fasteners Part 17: Pins Section 15: Grooved pins Half-length centre grooved Fasteners Part 17: Pins Section 16: Grooved pins Full-length taper grooved Fasteners Part 17: Pins Section 17: Grooved pins Half-length taper grooved Fasteners Part 17: Pins Section 18: Grooved pins with round head Fasteners Part 17: Pins Section 19: Grooved pins with countersunk head Fasteners Part 17: Pins Section 20: Spring-type straight pins . IDT. Ed. standard duty Fasteners Part 17: Pins Section 22: Spring-type straight pins . 2 (SABS 1700-17-23) SANS 1700-17-24:1998/ISO 13337:1997. Ed. IDT. IDT. light duty Fasteners Part 17: Pins Section 23: Spring-type straight pins . Ed. IDT. 2 (SABS 1700-17-22) SANS 1700-17-23:1998/ISO 8752:1997.AIA/St Fasteners Part 18: Rivets Section 6: Closed end blind rivets with break pull mandrel and protruding head . IDT. Ed. 2 (SABS 1700-17-18) SANS 1700-17-19:1998/ISO 8747:1997. 1 1 SANS 1700-18-6:2004/ISO 15975:2002. 1 1 SANS 1700-18-16:2004/ISO 16582:2002. Ed. Ed. 1 1 SANS 1700-18-11:2004/ISO 15980:2002.St/St Fasteners Part 18: Rivets Section 12: Open end blind rivets with break pull mandrel and protruding head . 1 1 SANS 1701-2-29:1996/ISO/TR 8646:1985. 1 1 SANS 1700-19-2:2003/ISO 14580:2001. IDT. IDT.NiCu/St or NiCu/SSt Fasteners Part 18: Rivets Section 19: Closed end blind rivets with pull mandrel and protruding head A2/SSt Fasteners Part 19: Hexalobular socket head screws Section 1: Hexalobular socket head cap screws Fasteners Part 19: Hexalobular socket head screws Section 2: Hexalobular socket cheese head screws Fasteners Part 19: Hexalobular socket head screws Section 3: Hexalobular socket pan head screws Fasteners Part 19: Hexalobular socket head screws Section 4: Hexalobular socket raised countersunk head screws Fasteners Part 19: Hexalobular socket head screws Section 5: Hexalobular socket pan head tapping screws Fasteners Part 19: Hexalobular socket head screws Section 6: Hexalobular socket raised countersunk head tapping screws Fasteners Part 19: Hexalobular socket head screws Section 7: Hexalobular socket raised countersunk (oval) head tapping screws Bearings Part 2: Rolling bearings Section 29: Explanatory notes on ISO 281-1:1977 SANS 1700-18-10:2004/ISO 15979:2002. IDT. 1 1 SANS 1700-19-4:2003/ISO 14584:2001.Cu/St or Cu/Br or Cu/SSt Fasteners Part 18: Rivets Section 18: Open end blind rivets with break pull mandrel and protruding head . 1 1 SANS 1700-19-5:2003/ISO 14585:2001. Ed. IDT. 1 1 SANS 1700-18-19:2004/ISO 16585:2002.AIA/AIA Fasteners Part 18: Rivets Section 13: Open end blind rivets with break pull mandrel and countersunk head . 1 1 SANS 1700-18-18:2004/ISO 16584:2002. IDT. Ed. Ed. IDT. Ed. 1 1 SANS 1700-19-7:2003/ISO 14587:2001.St/St Fasteners Part 18: Rivets Section 11: Open end blind rivets with break pull mandrel and countersunk head .AIA/AIA Fasteners Part 18: Rivets Section 14: Open end blind rivets with break pull mandrel and protruding head . 1 1 (SABS 1701-2-29) Page 85 . Ed. Ed. IDT. IDT. IDT.A2/A2 Fasteners Part 18: Rivets Section 16: Open end blind rivets with break pull mandrel and protruding head . IDT.A2/A2 Fasteners Part 18: Rivets Section 15: Open end blind rivets with break pull mandrel and countersunk head .Standards available in electronic format (PDF) October 2009 SANS Number SANS 1700-18-9:2004/ISO 15978:2002. 1 1 SANS 1700-19-1:2003/ISO 14579:2001. Ed.AIA/St Fasteners Part 18: Rivets Section 10: Open end blind rivets with break pull mandrel and protruding head . IDT. Ed. 1 1 SANS 1700-19-6:2003/ISO 14586:2001.Cu/St or Cu/Br or Cu/SSt Fasteners Part 18: Rivets Section 17: Open end blind rivets with break pull mandrel and countersunk head . 1 1 SANS 1700-18-15:2004/ISO 15984:2002. IDT. Ed. Ed. 1 1 SANS 1700-19-3:2003/ISO 14583:2001. Ed. Ed. IDT. IDT. Ed. IDT. Ed. 1 1 SANS 1700-18-14:2004/ISO 15983:2002. 1 1 SANS 1700-18-17:2004/ISO 16583:2002. Ed. IDT. 1 1 SANS 1700-18-13:2004/ISO 15982:2002. IDT. Ed. 1 Edition Title 1 Fasteners Part 18: Rivets Section 9: Open end blind rivets with break pull mandrel and countersunk head . Ed. IDT. IDT. 1 1 SANS 1700-18-12:2004/ISO 15981:2002. IDT. Ed.02 Electric cables . 1 1 SANS 1733:2007 (SABS 1733) 1. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1703:2003 (SABS 1703) SANS 1707-1:2007 Edition Title 1.Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N Part 1: General requirements Safety of industrial trucks . IDT. 1 1 SANS 1726-2:2003/EN 1726-2:2000.8/6.02 3 Gaming equipment Part 2: Limited payout gaming equipment Gaming equipment Part 3: Monitoring and control systems for gaming equipment Gaming equipment Part 4: Wagering record-keeping software Gaming equipment Part 5: Local area and wide area jackpot and progressive jackpot equipment Gaming equipment Part 7: Tokens 2 2 1 SANS 1718-7:2007 (SABS 1718-7) SANS 1718-8:2007 2 1 Gaming equipment Part 8: Roulette wheels SANS 1718-9:2005 (SABS 1718-9) SANS 1718-10:2009 2 Gaming equipment Part 9: Central monitoring system for limited payout machines Gaming equipment Part 10: Server-based gaming systems Safety of industrial trucks .01 SANS 1718-1:2008 (SABS 1718-1) SANS 1718-2:2005 (SABS 1718-2) SANS 1718-3:2003 (SABS 1718-3) SANS 1718-4:2008 (SABS 1718-4) SANS 1718-5:2009 2. IDT.02 Shade netting 1 Sawn eucalyptus timber Part 1: Proof-graded structural timber Sawn eucalyptus timber Part 2: Brandering and battens Water spray fixed systems for fire protection SANS 1707-2:2007 1 SANS 1709:2008/NFPA 15:2007.Self-propelled trucks up to and including 10 000 kg capacity and tractors with a drawbar pull up to and including 20 000 N Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads WC flushing systems (low-flushing capacity) that operate with flushing cisterns 1 SANS 1726-1:2003/EN 1726-1:1998.Shot exploder based Gaming equipment Part 1: Casino equipment 1 SANS 1717-2:2007 (SABS 1717-2) 1. Ed. 11 1 SANS 1713:2004 (SABS 1713) SANS 1717-1:2005 1.6 kV to 19/33 kV The design of detonator initiation systems for use in mining and civil blasting applications Part 1: Electronic initiation systems The design and approval of detonator initiation systems for use in mining and civil blasting applications Part 2: Electric initiation systems .Medium-voltage aerial bundled conductors for voltages from 3.02 Page 86 . 3 Edition Title 1 Cheese and processed cheese products Determination of fat content .01 Continuous pressed laminates (CPLs) 1. gravity feed Intravenous infusion and transfusion equipment (sterile-packed for single use) Part 4: Central venous pressure (CVP) monitoring sets Photoelectric control units for lighting (PECUs) 1 SANS 1775-2:2009 1 SANS 1775-4:2009 1 SANS 1777:2004 (SABS 1777) SANS 1783-1:2007 (SABS 1783-1) 1. IDT.01 1.Tributyltin naphthenatepermethrin Glass-fibre-reinforced thermosetting plastics (GRP) pipes Part 1: Pipes for water supply. fittings and ancilliaries for underground (buried) fire protection services Glass-reinforced polyester (GRP) poles 1. fittings and joint assemblies for the conveyance of hazardous chemical substances in industrial applications Glass-fibre-reinforced thermosetting plastics (GRP) pipes Part 3: Pipes.01 1. gravity feed Intravenous infusion and transfusion equipment (sterile-packed for single use) Part 2: Burette sets.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1735:2005/ISO 1735:2004.03 Petroleum jelly (petrolatum) 1.03 Liquefied petroleum gases 1 Sterile single-use intravenous (IV) infusion sets (administration sets) Intravenous infusion and transfusion equipment (sterile-packed for single use) Part 1: Infusion sets.02 1.01 1. Ed.01 Low pressure welded steel cylinders for fire extinguishers Cementitious grouting capsules for use with tendonbased support systems Timber preservative .01 1 SANS 1748-3:2007 1 SANS 1749:2006 (SABS 1749) SANS 1755:2008 (SABS 1755) SANS 1762:2007 (SABS 1762) SANS 1763:2008 (SABS 1763) SANS 1774:2007 (SABS 1774) SANS 1775:1999 (SABS 1775) SANS 1775-1:2009 1.03 Sawn softwood timber Part 1: General requirements Page 87 .Gravimetric method (Reference method) Safety helmets for cricket players SANS 1736:2007 (SABS 1736) SANS 1737:2008 (SABS 1737) SANS 1739:2008 (SABS 1739) SANS 1745:2003 (SABS 1745) SANS 1746:2008 (SABS 1746) SANS 1748-1:2004 (SABS 1748-1) SANS 1748-2:2005 1.01 1.03 Body-worn escape type breathing apparatus 1.01 Decorative melamine-faced boards 1. sewerage and drainage Glass-fibre-reinforced thermosetting plastics (GRP) pipes Part 2: Pipes. 01 1.01 Watt-hour meters .01 Road traffic law enforcement systems Part 0: General requirements Road traffic law enforcement systems Part 1: Laser speed measuring equipment Road traffic law enforcement systems Part 2: Radar speed measuring equipment Road traffic law enforcement systems Part 3: Distance-over-time speed measuring equipment (fixed distance/variable time) Road traffic law enforcement systems Part 4: Distance-over-time speed measuring equipment (variable distance/variable time) Road traffic law enforcement systems Part 5: Data capturing and recording devices for road traffic law enforcement Application of durable organic powder coatings for architectural aluminium Bottled tomato sauce 1.03 Sawn softwood timber Part 4: Brandering and battens Low power radio broadcast transmissions Part 1: AM transmissions Low power radio broadcast transmissions Part 2: FM transmissions Evidential breath analysers 1.AC electronic meters for active energy Lugs and ferrules for insulated electric cables Part 1: Copper conductors Induction motors Part 1: IEC requirements 1.01 Page 88 .01 1.01 2 1.01 2 2 1.01 1.04 Induction motors Part 2: Low-voltage three-phase standard motors Induction motors Part 3: Low-voltage three-phase intermittently-rated wound-rotor motors Induction motors Part 4: Single-phase induction motors 1. Ed.01 1.01 1. 1 (SABS 1793) SANS 1795-0:2007 (SABS 1795-0) SANS 1795-1:2007 (SABS 1795-1) SANS 1795-2:2007 (SABS 1795-2) SANS 1795-3:2007 (SABS 1795-3) SANS 1795-4:2007 (SABS 1795-4) SANS 1795-5:2007 (SABS 1795-5) SANS 1796:2009 (SABS 1796) SANS 1798:2006 (SABS 1798) SANS 1799:2004 (SABS 1799) SANS 1803-1:2009 (SABS 1803-1) SANS 1804-1:2007 (SABS 1804-1) SANS 1804-2:2007 (SABS 1804-2) SANS 1804-3:2007 (SABS 1804-3) SANS 1804-4:2006 (SABS 1804-4) Edition Title 1.01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 1783-2:2007 (SABS 1783-2) SANS 1783-3:2004 (SABS 1783-3) SANS 1783-4:2007 (SABS 1783-4) SANS 1790-1:2007 (SABS 1790-1) SANS 1790-2:2007 (SABS 1790-2) SANS 1793:2006/OIML R 126:1998.06 Sawn softwood timber Part 2: Stress-graded structural timber and timber for frame wall construction Sawn softwood timber Part 3: Industrial timber 1.01 1. IDT.01 2 2. 02 Page 89 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 1806:2009 (SABS 1806) SANS 1808-2:2005 (SABS 1808-2) SANS 1808-5:2008 (SABS 1808-5) SANS 1808-9:2008 (SABS 1808-9) SANS 1808-10:2005 (SABS 1808-10) SANS 1808-13:2009 (SABS 1808-13) SANS 1808-15:2007 (SABS 1808-15) SANS 1808-16:2008 (SABS 1808-16) SANS 1808-18:2004 (SABS 1808-18) SANS 1808-24:2004 (SABS 1808-24) SANS 1808-30:2004 (SABS 1808-30) SANS 1808-31:2003 (SABS 1808-31) SANS 1808-32:2005 (SABS 1808-32) SANS 1808-35:2004 (SABS 1808-35) SANS 1808-37:2005 (SABS 1808-37) SANS 1808-44:2005 (SABS 1808-44) SANS 1808-45:2005 (SABS 1808-45) SANS 1808-53:2005 (SABS 1808-53) SANS 1808-58:2005 (SABS 1808-58) SANS 1808-66:2005 (SABS 1808-66) Edition Title 1.02 1.02 1.02 1.03 Structural bearings .02 1.01 1.02 1.Bridge bearings .02 1.02 1.02 1. manufacture and installation Water supply and distribution system components Part 2: Metallic compression type pipe couplings Water supply and distribution system components Part 5: Flexible connectors Water supply and distribution system components Part 9: Metering taps and valves (metallic bodies) Water supply and distribution system components Part 10: Copper alloy check valves (spring-loaded) Water supply and distribution system components Part 13: Diaphragm valves Water supply and distribution system components Part 15: Mechanical backflow-prevention devices Water supply and distribution system components Part 16: Drinking fountain taps Water supply and distribution system components Part 18: PVC-U gate valves Water supply and distribution system components Part 24: Gas-operated water heaters Water supply and distribution system components Part 30: Laboratory water taps Water supply and distribution system components Part 31: Automatic control valves Water supply and distribution system components Part 32: Float valves (equilibrium type) Water supply and distribution system components Part 35: Electronically operated taps and valves Water supply and distribution system components Part 37: Single-control mixer taps (plastics) Water supply and distribution system components Part 44: Pipe saddles Water supply and distribution system components Part 45: Pipe repair clamps Water supply and distribution system components Part 53: Drain cocks for hot-water storage containers Water supply and distribution system components Part 58: In-line strainers Water supply and distribution system components Part 66: Demand type water taps 1.02 1.02 1.01 1.01 1.Materials.01 1.02 1.02 1.02 1.01 1. Standards available in electronic format (PDF) October 2009 SANS Number SANS 1808-85:2004 Edition Title 1 Water supply and distribution systems Part 85: Oriented polyvinyl chloride (PVC-O) pressure pipes for underground use Fail-safe underground mine locomotive control systems D.C. supplied luminaires for fluorescent lamps SANS 1809:2003 (SABS 1809) SANS 1814:2007 (SABS 1814) SANS 1815:2006 (SABS 1815) SANS 1816:2005 1.01 1.02 1.01 Servicing, repair and reconditioning of safes, strongroom doors, vault doors and fire-resistant equipment Electricity supply - Quality of supply: Power quality instruments Work on glass for glazing 1 SANS 1817:2008 (SABS 1817) SANS 1819:2006 (SABS 1819) SANS 1820:2006 (SABS 1820) SANS 1822:2008 (SABS 1822) SANS 1823:2007 (SABS 1823) SANS 1824:2003 1.01 1.02 Snatch blocks 1.01 Reconditioned snatch blocks 1.01 Slide fasteners 1.01 Touch and close fasteners 1 Beam trolleys (crawls) SANS 1825:2005 (SABS 1825) SANS 1827:2009 (SABS 1827) SANS 1828:2005 (SABS 1828) SANS 1829:2005 (SABS 1829) SANS 1830:2006 (SABS 1830) SANS 1833:1977/ISO 1833:1977, IDT, Ed. 2 (SABS ISO 1833) SANS 1833-1:2007/ISO 1833-1:2006, IDT, Ed. 1 2 Gas container test stations - General requirements for periodic inspection and testing of portable and transportable refillable gas containers The safety of water treatment chemicals for use in the food industry Cleaning chemicals for use in the food industry 1.03 1.03 2 Lubricants for use in the food industry 1.01 Flexible piping for underground use at service stations and consumer installations Textiles - Binary fibre mixtures - Quantitative chemical analysis Textiles - Quantitative chemical analysis Part 1: General principles of testing Textiles - Quantitative chemical analysis Part 2: Ternary fibre mixtures Textiles - Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone) 1 1 SANS 1833-2:2007/ISO 1833-2:2006, IDT, Ed. 1 1 SANS 1833-3:2007/ISO 1833-3:2006, IDT, Ed. 1 1 Page 90 Standards available in electronic format (PDF) October 2009 SANS Number SANS 1833-4:2007/ISO 1833-4:2006, IDT, Ed. 1 Edition Title 1 Textiles - Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) Textiles - Quantitative chemical analysis Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Textiles - Quantitative chemical analysis Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Textiles - Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Textiles - Quantitative chemical analysis Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Textiles - Quantitative chemical analysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Textiles - Quantitative chemical analysis Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Textiles - Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Textiles - Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) Textiles - Quantitative chemical analysis Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) Textiles - Quantitative chemical analysis Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) Textiles - Quantitative chemical analysis Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Textiles - Quantitative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Textiles - Quantitative chemical analysis Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) Textiles - Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Textiles - Quantitative chemical analysis Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Textiles - Quantitative chemical analysis Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) SANS 1833-5:2007/ISO 1833-5:2006, IDT, Ed. 1 1 SANS 1833-6:2007/ISO 1833-6:2007, IDT, Ed. 1 1 SANS 1833-7:2007/ISO 1833-7:2006, IDT, Ed. 1 1 SANS 1833-8:2007/ISO 1833-8:2006, IDT, Ed. 1 1 SANS 1833-9:2007/ISO 1833-9:2006, IDT, Ed. 1 1 SANS 1833-10:2007/ISO 1833-10:2006, IDT, Ed. 1 1 SANS 1833-11:2007/ISO 1833-11:2006, IDT, Ed. 1 1 SANS 1833-12:2007/ISO 1833-12:2006, IDT, Ed. 1 1 SANS 1833-13:2007/ISO 1833-13:2006, IDT, Ed. 1 1 SANS 1833-14:2007/ISO 1833-14:2006, IDT, Ed. 1 1 SANS 1833-15:2007/ISO 1833-15:2006, IDT, Ed. 1 1 SANS 1833-16:2007/ISO 1833-16:2006, IDT, Ed. 1 1 SANS 1833-17:2007/ISO 1833-17:2006, IDT, Ed. 1 1 SANS 1833-18:2007/ISO 1833-18:2006, IDT, Ed. 1 1 SANS 1833-19:2007/ISO 1833-19:2006, IDT, Ed. 1 1 SANS 1833-21:2007/ISO 1833-21:2006, IDT, Ed. 1 1 Page 91 Standards available in electronic format (PDF) October 2009 SANS Number SANS 1834:2005 (SABS 1834) SANS 1835:2002 (SABS 1835) SANS 1838-1:2007 (SABS 1838-1) Edition Title 1.01 Unsintered polytetrafluoroethylene (PTFE) tapes for engineering applications Ductile iron pipes, fittings, accessories and their joints, for use in high and low pressure systems for potable and foul water Electronic self-indicating road vehicle mass measuring equipment for use by road traffic authorities Part 1: Non-automatic mass measuring equipment for static mass measurement Manufacture of measuring container bottles 1 1.02 SANS 1840:2009 (SABS 1840) SANS 1841:2008 (SABS 1841) SANS 1842:2005 (SABS 1842) SANS 1843:2005 (SABS 1843) SANS 1844:2009 (SABS 1844) SANS 1845:2003 2 2 Control of the quantity of contents in prepacked packages within the prescriptions of legal metrology legislation High performance engine lubricating oil for petrol engines (for API Service Category SL) High performance engine lubricating oil for diesel engines (for API Service Category CI-4) The testing of polypropylene woven fabrics for use in flexible intermediate bulk containers (FIBCs) for nondangerous goods Prefinished sheet metal products for interior and exterior building applications Geyser drip trays 2 2 1.02 1 SANS 1848:2006 (SABS 1848) SANS 1849:2008 (SABS 1849) SANS 1850:2003 1.04 1.01 Butterfly valves for general purposes 1 The design and manufacture of commercial kitchen extraction systems Lubricating grease SANS 1851:2008 (SABS 1851) SANS 1853:2009 (SABS 1853) SANS 1854:2005 (SABS 1854) SANS 1857:2005 (SABS 1857) SANS 1858:2007 (SABS 1858) SANS 1860:2008 (SABS 1860) SANS 1862:2003 (SABS 1862) SANS 1865:2006 (SABS 1865) 1.01 1.01 Disinfectants and detergent-disinfectants for use in the food industry The design and manufacture of trestles 1.01 1.01 Copper alloy gate valves - Light duty 1.01 Oil spill dispersants 1.01 Wool packs for unprocessed wool 1.01 Packaged water other than natural mineral water 1.01 Point-of-use drinking water treatment units Page 92 Standards available in electronic format (PDF) October 2009 SANS Number SANS 1866:2004 Edition Title 1 Surgical face masks SANS 1866:2008 1.01 Surgical face masks SANS 1867:2003 1 Sprayed plastics foams for use in mines SANS 1868:2002 (SABS 1868) SANS 1869:2001 (SABS 1869) SANS 1872:2002 (SABS 1872) SANS 1873:2001 (SABS 1873) SANS 1874:2009/NRS 006:2009, IDT, Ed. 2 (SABS 1874) SANS 1875:2007 (SABS 1875) SANS 1877:2004 1 Gel detergent cleaner (non-abrasive) 1 Chrome-tanned bend outer sole leather 1 Stationery - Marking pens for text highlighting 1 Vegetable-tanned bend outer sole leather 2 Switchgear - Metal-enclosed ring main units for rated a.c. voltages above 1 kV and up to and including 36 kV Edible oils 1.01 1 A standard land-cover classification scheme for remote-sensing applications in South Africa South African spatial metadata standard Part 1: Core metadata profile Precast concrete suspended slabs SANS 1878-1:2005 1 SANS 1879:2004 (SABS 1879) SANS 1882:2003 1.01 1 Polymer concrete surface boxes, manhole and inspection covers, gully gratings and frames Geographic information - Addresses Part 1: Data format of addresses Geographic information - Addresses Part 3: Guidelines for address allocation and updates Holding pens for temporary housing of animals Part 1: Holding pens for wild herbivores at auctions and in quarantine facilities Holding pens for temporary housing of animals Part 2: Vehicles for the transportation of wild herbivores by road to holding pens and other facilities Holding pens for temporary housing of animals Part 3: Vehicles for transportation of wild carnivores by road to holding pens and other facilities AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 36 kV Tissue paper Part 1: General requirements SANS 1883-1:2009 1 SANS 1883-3:2009 1 SANS 1884-1:2004 1 SANS 1884-2:2007 1 SANS 1884-3:2008 1 SANS 1885:2008/NRS 003:2008, IDT, Ed. 1 (SABS 1885) SANS 1887-1:2008 2 1 Page 93 Standards available in electronic format (PDF) October 2009 SANS Number SANS 1887-2:2008 Edition Title 1 Tissue paper Part 2: Toilet paper SANS 1887-3:2008 1 Tissue paper Part 3: Facial tissues SANS 1887-4:2008 1 Tissue paper Part 4: Paper towels SANS 1887-5:2008 1 Tissue paper Part 5: Disposable wiping paper (in rolls) Tissue paper Part 6: Paper dressing (medical) towels Tissue paper Part 7: Paper serviettes SANS 1887-6:2008 1 SANS 1887-7:2008 1 SANS 1887-8:2008 1 Tissue paper Part 8: Paper-towel rolls for centrefeed dispensing devices Tissue paper Part 9: Wrappers for citrus and deciduous fruit Incandescent lamps for traffic signal lights SANS 1887-9:2008 1 SANS 1888:2007 (SABS 1888) SANS 1891-1:2008 (SABS 1891-1) SANS 1900:2004 (SABS 1900) SANS 1903:2007 (SABS 1903) SANS 1905:2007 1.01 1.01 Performance requirements for clothing Part 1: Shirts 1.01 Monoplanar prefabricated timber roof trusses (nailplated) Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests Hydraulic brake and clutch fluid (DOT 3 and DOT 4) 1.01 2 SANS 1906:2009 3 Non-pressure paraffin stoves and heaters SANS 1910:2009 1.02 Portable refillable fire extinguishers SANS 1913:2008 1.02 Kerosene for domestic heating and illuminating SANS 1914-1:2002 1 Targeted construction procurement Part 1: Participation of targeted enterprises Targeted construction procurement Part 2: Participation of targeted partners in joint ventures Targeted construction procurement Part 3: Participation of targeted enterprises and targeted partners in joint ventures Targeted construction procurement Part 4: Participation of targeted enterprises and targeted labour (local resources) SANS 1914-2:2002 1 SANS 1914-3:2002 1 SANS 1914-4:2002 1 Page 94 Standards available in electronic format (PDF) October 2009 SANS Number SANS 1914-5:2002 Edition Title 1 Targeted construction procurement Part 5: Participation of targeted labour Targeted construction procurement Part 6: Participation of targeted enterprises in concession contracts Woven backfill bags and paddock curtains SANS 1914-6:2002 1 SANS 1915:2003 1 SANS 1918:2007 1 Needleless connectors (sterile-packed for single patient use) Mixtures of copper azole compounds for timber preservation Construction and management requirements for works contracts Part 1: General engineering and construction works Construction and management requirements for works contracts Part 2: Accommodation of traffic on public roads occupied by the contractor Construction and management requirements for works contracts Part 3: Structural steelwork Construction and management requirements for works contracts Part 4: Third-party management support in works contracts Construction and management requirements for works contracts Part 5: Earthworks activities which are to be performed by hand Construction and management requirements for works contracts Part 6: HIV/AIDS awareness Acidic cleaners for the cleaning of acid-resistant sanitary ware Scouring compounds SANS 1920:2004 1 SANS 1921-1:2004 1 SANS 1921-2:2004 1 SANS 1921-3:2004 1 SANS 1921-4:2004 1 SANS 1921-5:2004 1 SANS 1921-6:2004 1 SANS 1922:2009 1.02 SANS 1923:2008 1.01 SANS 1924:2007 1 Toilet soaps intended for use in dispensers SANS 1925:2008 1.01 Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value Ambient air quality - Limits for common pollutants SANS 1926:2008 1.01 SANS 1928:1995/ISO 1928:1995, IDT, Ed. 2 (SABS ISO 1928) SANS 1929:2005 1 1.01 SANS 1931:2003 1 Particle board - Highly moisture-resistant exterior type Live working - Portable equipment for earthing or earthing and short-circuiting - National modifications to international requirements SANS 1934:2004 1 Page 95 Standards available in electronic format (PDF) October 2009 SANS Number SANS 1935:2004 Edition Title 1 Automotive biodiesel fuel SANS 1937:2006 1 Cosmetic products .Quantity and marking SANS 1951:2008/ISO 1951:2007. 2 (SABS ISO 1953) SANS 1973-1:2007 1 1 Low-voltage switchgear and controlgear ASSEMBLIES Part 1: Type-tested ASSEMBLIES with stated deviations and a rated short-circuit withstand strength above 10 kA Low-voltage switchgear and controlgear ASSEMBLIES Part 3: Safety of ASSEMBLIES with a rated prospective short-circuit current of up to and including 10 kA Low-voltage switchgear and controlgear ASSEMBLIES Part 7: Requirements for testing under conditions of arcing due to internal fault Low-voltage switchgear and controlgear ASSEMBLIES Part 8: Safety of minimally tested ASSEMBLIES (MTA) with a rated short-circuit current above 10 kA and a rated busbar current of up to and including 1 600 A a. Ed. Ed. IDT. Ed.Size analysis by sieving SANS 1952:2009/ISO 1952:2008. IDT.Determination of extractable metals in dilute hydrochloric acid Hard coal . and d.01 Page 96 . recommendations and information Solid mineral fuels . IDT. 2 1 SANS 1953:1994/ISO 1953:1994. 3 1 Presentation/representation of entries in dictionaries . 1 1 SANS 2001-BE1:2008 1 Construction works Part BE1: Earthworks (general) SANS 2001-BS1:2008 1 Construction works Part BS1: Site clearance SANS 2001-CC1:2007 1 Construction works Part CC1: Concrete works (structural) Construction works Part CC2: Concrete works (minor works) Construction works Part CG1: Installation of glazing in window and door frames Construction works Part CM1: Masonry walling SANS 2001-CC2:2007 1 SANS 2001-CG1:2007 1 SANS 2001-CM1:2007 1 SANS 2001-CS1:2005 1 Construction works Part CS1: Structural steelwork SANS 2001-CT1:2007 1 Construction works Part CT1: Structural timberwork (flooring) Construction works Part CT2: Structural timberwork (roofing) SANS 2001-CT2:2009 1. Conveyor chains. Ed.Requirements. attachments and sprockets SANS 1973-3:2008 1 SANS 1973-7:2008 1 SANS 1973-8:2008 1 SANS 1977:2006/ISO 1977:2000.c. IDT.c. IDT. 5.Determination of single-end breaking force and elongation at break Thermal spraying . 1 (SABS ISO 2143) 1 1 SANS 2177:2008/ISO 2177:2003. IDT.2 2 1 1 1. 3 (SABS ISO 2064) SANS 2076:1999/ISO 2076:1999.02 Page 97 . 4 (SABS ISO 2076) SANS 2081:1986/ISO 2081:1986. Ed. IDT. Ed.Immunity characteristics Limits and methods of measurement 1 1 1 SANS 2108:2005/ISO 2108:2005.Generic names 1 1 2 2 1 1 Metallic coatings . 3 (SABS ISO 2177) SANS 2178:1982/ISO 2178:1982. IDT.Definitions and conventions concerning the measurement of thickness Textiles . Ed. IDT. Ed. 2 (SABS ISO 2093) SANS 2106:1982/ISO 2106:1982.Direct counting method Textiles . 2 (SABS ISO 2081) SANS 2082:1986/ISO 2082:1986. Ed. 2 (SABS ISO 2178) SANS 2179:1986/ISO 2179:1986. 3 (SABS ISO 2063) SANS 2064:2008/ISO 2064:1996. 2 (SABS ISO 2135) SANS 2143:1981/ISO 2143:1981.Man-made fibres .Metallic and other inorganic coatings . 2 (SABS ISO 2062) SANS 2063:2008/ISO 2063:2005. 2 (SABS ISO 2106) 1 Textiles . aluminium and their alloys Metallic and other inorganic coatings .Electroplated coatings of cadmium on iron or steel Electroplated coatings of tin .Coulometric method by anodic dissolution Non-magnetic coatings on magnetic substrates Measurement of coating thickness . IDT. Ed. 2 (SABS ISO 2060) SANS 2061:1995/ISO 2061:1995.Yarn from packages .International Standard Book Number (ISBN) Anodizing of aluminium and its alloys . Ed.Determination of linear density (mass per unit length) by the skein method Textiles .Determination of twist in yarns . IDT.Specification and test methods Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxide coatings . IDT. IDT. Ed. Ed.Electroplated coatings of zinc on iron or steel Metallic coatings . Ed. Ed.Gravimetric method Information and documentation . IDT. Ed. IDT.Accelerated test of light fastness of coloured anodic oxide coatings using artificial light Anodizing of aluminium and its alloys .Yarns from packages . 4 1 SANS 2135:1984/ISO 2135:1984.Dye spot test with prior acid treatment Metallic coatings . 2 (SABS ISO 2179) SANS 2200:2005/CISPR 20:2005. IDT. IDT.Magnetic method Electroplated coatings of tin-nickel alloy Specification and test methods Sound and television broadcast receivers and associated equipment .Zinc. Ed. Ed. 2 (SABS ISO 2082) SANS 2093:1986/ISO 2093:1986.Standards available in electronic format (PDF) October 2009 SANS Number SANS 2001-DP1:2008 Edition Title 1 Construction works Part DP1: Earthworks for buried pipelines and prefabricated culverts Construction works Part EM1: Cement plaster SANS 2001-EM1:2007 1 SANS 2060:1994/ISO 2060:1994. Ed. IDT. IDT. IDT. 2 (SABS ISO 2061) SANS 2062:1995/ISO 2062:1993. Ed. Ed.Measurement of coating thickness . IDT.Estimation of loss of absorptive power of anodic oxide coatings after sealing . Specification Continuous tone controlled signalling system (CTCSS) for use in the land mobile services Performance specification Textile fabrics .7) SANS 2220-1-8:2006 (SABS 2220-1.Passive infra-red detectors Electrical security systems Part 1. 2 1. 1.2) SANS 2220-1-3:2006 (SABS 2220-1.Microwave Doppler detectors Electrical security systems Part 1-5: Intruder alarm systems .02 1.Guidelines for storage 1.01 1.01 1. 2 (SABS ISO 2262) SANS 2306:1993/MPT 1306:1993.01 1 SANS 2262:1984/ISO 2262:1984. 1 1 General purpose thimbles for use with steel wire ropes .01 1.5) Edition Title 1.4) SANS 2220-1-5:2007 (SABS 2220-1.01 SANS 2220-1-6:2007/IEC 60839-2-7:1994.6: Intruder alarm systems .01 1. IDT.01 1 (SABS 2220-1. IDT.3) SANS 2220-2-4:2005 (SABS 2220-2.2: Intruder alarm systems: Infra-red beam interruption detectors Electrical security systems Part 1-3: Intruder alarm systems .3) SANS 2220-1-4:2007 (SABS 2220-1.Determination of the recovery from creasing of the horizontally folded specimen by measuring the angle of recovery A signalling standard for trunked private land mobile radio systems 1 1 SANS 2327:1991/MPT 1327:1991.1: Intruder alarm systems . Ed.1) SANS 2220-2-2:2005 (SABS 2220-2. IDT.2) SANS 2220-2-3:2005 (SABS 2220-2.6) SANS 2220-1-7:2006 (SABS 2220-1.01 1.7: Access control systems: Barriers Rubber products .02 Electrical security systems Part 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 2220-1-1:2006 (SABS 2220-1.1) SANS 2220-1-2:2006 (SABS 2220-1. Ed.01 1.02 1. IDT (SABS MPT 1306) SANS 2313:2008/ISO 2313:1972. Ed.6) SANS 2220-2-7:2005 (SABS 2220-2.Ultrasonic Doppler detectors Electrical security systems Part 1-4: Intruder alarm systems .01 1.7: Intruder alarm systems: Power units Electrical security systems Part 1-8: Environmental testing Electrical security systems Part 2-1: Access control systems: General characteristics Electrical security systems Part 2-2: Access control systems: Central processor Electrical security systems Part 2-3: Access control systems: Card readers Electrical security systems Part 2.Passive glass-break detectors for use in buildings Electrical security systems Part 1.01 1. Ed. NEQ.8) SANS 2220-2-1:2005 (SABS 2220-2.5) SANS 2220-2-6:2005 (SABS 2220-2.General requirements Electrical security systems Part 1.4) SANS 2220-2-5:2005 (SABS 2220-2. IDT (SABS MPT 1327) 1 Page 98 .7) SANS 2230:2003/ISO 2230:2002.01 1.4: Access control systems: Reader controllers Electrical security systems Part 2-5: Access control systems: Biometric readers Electrical security systems Part 2-6: Access control systems: Access cards Electrical security systems Part 2. IDT. IDT. Ed. metal recovery and deposition coefficient Steel wire ropes for general purposes .Measurement of coating thickness .Determination of fat content .Physical and mechanical tests Determination of static absorption of water Textile floor coverings . 2 1 SANS 2505:2007/ISO 2505:2005. 2 1 Page 99 . Ed.Test method and parameters SANS 2503:2007/ISO 2503:1998. IDT. 2 1 SANS 2398:2008/ISO 2398:2006. 1 (SABS ISO 2401) SANS 2408:2005/ISO 2408:2004.Standards available in electronic format (PDF) October 2009 SANS Number SANS 2328:2009/ISO 2328:2007. IDT. MOD (SABS MPT 1352) SANS 2361:1982/ISO 2361:1982. 3 Edition Title 2 Fork-lift trucks . Ed.Technical characteristics and testing System interface specification for radio units to be used with commercial trunked networks operating in Band III sub-bands 1 and 2 Radio interface specification for commercial trunked networks operating in Band III.Pressure regulators for gas cylinders used in welding. 5 1 Rubber hoses. Ed.Dee shackles and bow shackles Leather . IDT. 1 2 2 2 1 2 1 SANS 2394:2003/ISO 2394:1998.Determination of the efficiency. IDT. Ed. IDT (SABS MPT 1347) SANS 2352:1991/MPT 1352:1991. Ed.Hook-on type fork arms and fork arm carriages .Range of maximum capacities for basic models General principles on reliability for structures SANS 2330:2007/ISO 2330:2002. IDT. IDT. Ed. Ed.Gravimetric method (Reference method) Gas welding equipment . Ed. 2 (SABS ISO 2361) SANS 2362:1997/MPT 1362:1997. cutting and allied processes up to 300 bar Thermoplastics pipes . Ed.Specification Covered electrodes . IDT. 3 (SABS ISO 2409) SANS 2415:2005/ISO 2415:2004. IDT. IDT. for compressed-air . sub-bands 1 and 2 Test schedule for the approval of radio units to be used with commercial trunked networks operating in Band III subbands 1 and 2 Electrodeposited nickel coatings on magnetic and non-magnetic substrates . Ed. IDT (SABS MPT 1343) SANS 2347:1991/MPT 1347:1991. textile-reinforced. IDT. Ed. 1 1 1 Milk . IDT. Ed. 3 (SABS ISO 2408) SANS 2409:2008/ISO 2409:2007.Mounting dimensions Fork-lift trucks . Ed.Determination of fat content (Routine method) SANS 2450:2005/ISO 2450:1999. 3 1 Cream .Cross-cut test SANS 2401:1972/ISO 2401:1972. IDT. Ed. IDT. 2 1 2 2 2 Forged shackles for general lifting purposes .Vocabulary 1 SANS 2424:1992/ISO 2424:1992.Fork arms .Longitudinal reversion .Minimum requirements Paints and varnishes . IDT. Ed. Ed. 3 (SABS MPT 1362) SANS 2374:2008/ISO 2374:1983. 3 (SABS ISO 2424) SANS 2446:2005/ISO 2446:1976.Magnetic method Installation of mobile radio equipment in land based vehicles Lifting appliances . IDT. 3 (SABS ISO 2415) SANS 2417:2009/ISO 2417:2002. 3 1 SANS 2343:1991/MPT 1343:1991. Physical and mechanical tests Determination of thickness Mechanical vibration and shock . IDT. Ed.Vicat softening temperature Part 1: General test method Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions Welded.Covered electrodes for manual metal arc welding of non-alloy and fine grain steels . IDT. IDT.Classification Steel . brazed and soldered joints . IDT. IDT. 4 1 SANS 2795:2005/ISO 2795:1991. vulcanized .Guidelines for the establishment and development of monolingual thesauri Information and documentation . Ed.Determination of density 1 1 2 1 SANS 2570:2006/ISO 257:2004.Format for information exchange Rubber. Ed. Ed. Ed. Ed. IDT.Evaluation of human exposure to whole-body vibration Part 1: General requirements Information and documentation . 2 Edition Title 1 Thermoplastics pipes and fittings . 4 1 SANS 2808:2008/ISO 2808:2007. 2 3 1 2 1 1 1 SANS 2859-3:2008/ISO 2859-3:2005. Ed. 3 (SABS ISO 2553) SANS 2560:2008/ISO 2560:2002. Ed.Symbolic representation on drawings Welding consumables . 2 1 Page 100 .Conversion of elongation values Part 1: Carbon and low alloy steels Pesticides and other agrochemicals . IDT. 60° and 85° Paints and varnishes .Determination of specular gloss of non-metallic paint films at 20°.International library statistics Plain bearings . IDT. 3 1 SANS 2788:2005/ISO 2788:1986. IDT. Ed. Ed. IDT. IDT. IDT. 3 1 SANS 2589:2009/ISO 2589:2002. Ed. IDT.Sintered bushes . 1 (SABS ISO 2814) SANS 2819:1980/ISO 2819:1980. IDT. 1 (SABS ISO 2811-1) SANS 2813:1994/ISO 2813:1994. Ed. 1 (SABS ISO 2507-1) SANS 2551:1981/ISO 2551:1981. 2 (SABS ISO 2631-1) SANS 2709:2008/ISO 2709:2008. 2 1 SANS 2631-1:1997/ISO 2631-1:1997.Dimensions and tolerances Paints and varnishes . Ed. Ed. Ed. 4 1 1 SANS 2781:2003/ISO 2781:1988. 2 1 Documentation . IDT.Determination of density Part 1: Pyknometer method Paints and varnishes . IDT.Determination of film thickness Paints and varnishes . 4 (SABS ISO 2808) SANS 2811-1:1997/ISO 2811-1:1997. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 2507-1:1995/ISO 2507-1:1995. IDT. Ed. IDT. 2 (SABS ISO 2560) SANS 2566-1:2005/ISO 2566-1:1984. 3 (SABS ISO 2813) SANS 2814:1973/ISO 2814:1973.Principles for the selection of common names Leather . IDT.Review of methods available for testing adhesion Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection Sampling procedures for inspection by attributes Part 3: Skip-lot sampling procedures SANS 2789:2009/ISO 2789:2006. 2 (SABS ISO 2819) SANS 2859-1:2004/ISO 2859-1:1999. IDT. 2 (SABS ISO 2551) SANS 2553:1992/ISO 2553:1992. Ed.Comparison of contrast ratio (hiding power) of paints of the same type and colour Metallic coatings on metallic substrates Electrodeposited and chemically deposited coatings . Ed. Ed. Rolling stock Civil engineering test methods Part PR1: Determination of uncertainty of measurement. civil and electrical infrastructure Railway safety management Part 2-3: Technical requirements for engineering and operational standards . IDT.Track.Antistatic and conductive products for hospital use . vulcanized . IDT. Ed. Ed. vulcanized .Access systems SANS 2859-5:2008/ISO 2859-5:2005. 1 1 SANS 2883:2003/ISO 2883:1980. IDT.Antistatic and conductive products . reproducibility and bias Civil engineering test methods Part GR1: Wet preparation and particle size analysis Civil engineering test methods Part AG1: Particle size analysis of aggregates by sieving Civil engineering test methods Part GR2: Dry preparation and dry particle size analysis of graded materials Civil engineering test methods Part AG2: Determination of the average least dimension of aggregates by direct measurement Civil engineering test methods Part AG3: Determination of the average least dimension of aggregates by computation SANS 3000-2-2:2008 1 SANS 3000-2-3:2008 1 SANS 3001-PR1:2008 1 SANS 3001-GR1:2008 1 SANS 3001-AG1:2009 1 SANS 3001-GR2:2009 1 SANS 3001-AG2:2009 1 SANS 3001-AG3:2009 1 Page 101 . IDT. 4 1 SANS 2867:2008/ISO 2867:2006.Electrical resistance limits Anodizing of aluminium and its alloys . 2 (SABS ISO 2931) SANS 3000-1:2009 1 2 SANS 3000-2-1:2008 1 Railway safety management Part 2-1: Technical requirements for engineering and operational standards . IDT. 1 1 SANS 2859-10:2008/ISO 2859-10:2006. repeatability.Minimum access dimensions Earth-moving machinery . 1 1 SANS 2931:1983/ISO 2931:1983.Electrical resistance limits Rubber. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 2859-4:2008/ISO 2859-4:2002.General Railway safety management Part 2-2: Technical requirements for engineering and operational standards . 1 1 SANS 2860:2003/ISO 2860:1992. Ed.Determination of electrical resistance Rubber. vulcanized . Ed. 2 1 Rubber. Ed. Ed. IDT. Ed. 6 2 SANS 2878:2003/ISO 2878:1987. IDT.Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance Railway safety management Part 1: General SANS 2882:2003/ISO 2882:1979.Antistatic and conductive products for industrial use . Ed. Ed. IDT. 2 Edition Title 1 Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes Earth-moving machinery . IDT. Ed. IDT. 3 1 SANS 3074:2003/ISO 3074:1975.Dental zinc oxide/eugenol cements and zinc oxide/non-eugenol cements Plastics piping systems . IDT. 1 1 SANS 3189-1:1985/ISO 3189-1:1985.Penetrant testing and magnetic particle testing . coarse sand ratio. plastic limit.Round-the-clock method Codes for the representation of names of countries and their subdivisions Part 1: Country codes Codes for the representation of names of countries and their subdivisions Part 2: Country subdivision code Codes for the representation of names of countries and their subdivisions Part 3: Code for formerly used names of countries Sockets for wire ropes for general purposes Part 1: General characteristics and conditions of acceptance SANS 3077:2008/ISO 3077:2001.Determination of resistance to external blows . IDT. plasticity index and linear shrinkage Civil engineering test methods Part GR11: Determination of the liquid limit with the two-point method Civil engineering test methods Part GR12: Determination of the flow curve liquid limit Civil engineering test methods Part GR20: Determination of the moisture content by ovendrying Non-calibrated round steel link lifting chain and chain slings .Determination of pH of aqueous extract SANS 3001-PR5:2009 1 SANS 3001-PR10:2009 1 SANS 3001-GR10:2008 1 SANS 3001-GR11:2008 1 SANS 3001-GR12:2008 1 SANS 3001-GR20:2008 1 SANS 3056:1986/ISO 3056:1986. Ed. IDT. DAT and DT). Ed. 3 1 SANS 3096:2005/ISO 3096:1996.Needle rollers . IDT. grading modulus and fineness modulus Civil engineering test methods Part PR10: Checking. Ed. 2 1 SANS 3107:2008/ISO 3107:2004.Dimensions and tolerances Dentistry .Viewing conditions Textiles . Ed.Plastics components Determination of dimensions Thermoplastics pipes . IDT. 1 1 Wool . Ed. IDT. 1 (SABS ISO 3127) SANS 3166-1:2007/ISO 3166-1:2006. IDT. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 3001-AG4:2009 Edition Title 1 Civil engineering test methods Part AG4: Determination of the flakiness index of coarse aggregate Civil engineering test methods Part PR5: Computation of soil-mortar percentages. fine-tolerance hoist chain Rolling bearings . Ed.Grade T (types T. 2 1 1 SANS 3071:2007/ISO 3071:2005. Ed. IDT. handling. Ed. Ed.Determination of dichloromethane-soluble matter in combed sliver Short-link chain for lifting purposes . 3 1 SANS 3126:2008/ISO 3126:2005. 2 1 SANS 3166-3:2005/ISO 3166-3:1999. 2 (SABS ISO 3056) SANS 3059:2004/ISO 3059:2001. 1 (SABS ISO 3189-1) 1 Page 102 . 2 (SABS ISO 3126) SANS 3127:1994/ISO 3127:1994. Ed. Ed. IDT. maintenance and verification of test sieves Civil engineering test methods Part GR10: Determination of the one-point liquid limit. 2 2 1 1 SANS 3166-2:2008/ISO 3166-2:2007. Ed.Use and maintenance Non-destructive testing . IDT. 3 1 SANS 3452-1:2009/ISO 3452-1:2008. Ed. Ed. IDT. IDT.Comparison of two means in the case of paired observations Rubber . Ed.Laboratory tests and performance requirements Earth-moving machinery . IDT. 2 (SABS ISO 3452-2) 2 Page 103 . Ed. 1 1 SANS 3452-2:2009/ISO 3452-2:2006. Ed. IDT. IDT.International standard serial number (ISSN) Statistical interpretation of data . 3 (SABS ISO 3270) SANS 3297:2009/ISO 3297:2007. Ed.Determination of percentage volume of non-volatile matter by measuring the density of a dried coating Paints. 4 1 1 SANS 3301:2004/ISO 3301:1975. Ed. Ed. 1 (SABS ISO 3189-2) SANS 3189-3:1985/ISO 3189-3:1985. IDT.Systems and performance requirements and test procedures Non-destructive testing . Ed.Penetrant testing Part 2: Testing of penetrant materials 1 1 SANS 3228:2005/ISO 3228:1993. IDT. Ed. IDT. Ed. 4 (SABS ISO 3310-2) SANS 3387:2003/ISO 3387:1994.Braking systems of rubber-tyred machines . Ed. 2 1 1 1 SANS 3448:2008/ISO 3448:1992. Ed. 5 2 SANS 3450:2003/ISO 3450:1996. IDT. 3 1 SANS 3233:1998/ISO 3233:1998.Cast and pressed housings for insert bearings Paints and varnishes . varnishes and plastics . 2 (SABS ISO 3210) Edition Title 1 Sockets for wire ropes for general purposes Part 2: Special requirements for sockets produced by forging or machined from the solid Sockets for wire ropes for general purposes Part 3: Special requirements for sockets produced by casting Anodizing of aluminium and its alloys . Ed.ISO viscosity classification Earth-moving machinery . IDT. IDT. IDT.Tolerances for products Part 2: Geometrical tolerances Test sieves . 1 1 SANS 3310-1:2000/ISO 3310-1:2000. IDT. 3 (SABS ISO 3251) SANS 3253:2004/ISO 3253:1998. IDT. IDT.Technical requirements and testing Part 2: Test sieves of perforated metal plate Rubber . Ed.Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution Rolling bearings . Ed. Ed.Determination of crystallization effects by hardness measurements Industrial liquid lubricants . IDT. IDT. 2 1 SANS 3449:2008/ISO 3449:2005.Determination of non-volatile-matter content Gas welding equipment .Falling-object protective structures . Ed. IDT. 1 (SABS ISO 3189-3) SANS 3210:1983/ISO 3210:1983.Tolerances for products Part 1: Dimensional tolerances Rubber .Hose connections for equipment for welding. 2 1 2 1 SANS 3270:1984/ISO 3270:1984. Ed.Technical requirements and testing Part 1: Test sieves of metal wire cloth Test sieves . Ed. cutting and allied processes Paints and varnishes and their raw materials Temperatures and humidities for conditioning and testing Information and documentation .Penetrant testing Part 1: General principles Non-destructive testing .Standards available in electronic format (PDF) October 2009 SANS Number SANS 3189-2:1985/ISO 3189-2:1985. 1 1 SANS 3302-1:2003/ISO 3302-1:1996. 1 1 SANS 3302-2:2003/ISO 3302-2:1998. 3 (SABS ISO 3233) SANS 3251:2007/ISO 3251:2003. 4 (SABS ISO 3310-1) SANS 3310-2:1999/ISO 3310-2:1999. IDT. IDT.Measurement of coating thickness . Ed. Ed. Ed. aluminium-zinc alloys and zinc-aluminium alloys Test methods Animal and vegetable fats and oils .Covered electrodes for manual metal arc welding of creep-resisting steels Classification Welding consumables . 3 (SABS ISO 3741) SANS 3743-1:1994/ISO 3743-1:1994. IDT.X-ray spectrometric methods Heavy-duty cranked-link transmission chains 1 2 SANS 3497:2008/ISO 3497:2000. IDT. 4 Edition Title 1 Non-destructive testing . IDT. 2 2 1 SANS 3534-1:2007/ISO 3534-1:2006. Ed. Ed. IDT. 1 (SABS ISO 3452-4) SANS 3471:2009/ISO 3471:2008. IDT.Penetrant testing Part 4: Equipment Earth-moving machinery . IDT.Determination of saponification value Paints and varnishes . IDT.Vocabulary and symbols Part 1: General statistical terms and terms used in probability Statistics .Measurement of thickness . 1 (SABS ISO 3452-3) SANS 3452-4:1998/ISO 3452-4:1998.Precision methods for reverberation rooms Acoustics . IDT. 3 (SABS ISO 3574) SANS 3575:2008/ISO 3575:2005.Specification and test methods Acoustics . Ed. Ed. Ed. IDT. 2 (SABS ISO 3581) SANS 3613:2008/ISO 3613:2000. 2 (SABS ISO 3613) SANS 3657:2003/ISO 3657:2002. 1 (SABS ISO 3696) SANS 3741:1999/ISO 3741:1999. movable sources in reverberant fields Part 1: Comparison method for hard-walled test rooms SANS 3534-2:2007/ISO 3534-2:2006.Determination of sound power levels of noise sources using sound pressure .Standards available in electronic format (PDF) October 2009 SANS Number SANS 3452-3:1998/ISO 3452-3:1998. Ed. 2 2 SANS 3534-3:2004/ISO 3534-3:1999. IDT.Thin-walled half bearings with or without flange . Ed. IDT.Vocabulary and symbols Part 3: Design of experiments Metallic and non-metallic coatings . IDT. Ed.Covered electrodes for manual metal arc welding of stainless and heatresisting steels . IDT. Ed. cadmium. 2 (SABS ISO 3580) SANS 3581:2008/ISO 3581:2003. Ed. IDT.Beta backscatter method Plain bearings . IDT.Classification Chromate conversion coatings on zinc.Laboratory tests and performance requirements Metallic coatings . 2 (SABS ISO 3543) SANS 3548:2005/ISO 3548:1999. IDT.Roll-over protective structures . 3 (SABS ISO 3575) SANS 3580:2006/ISO 3580:2004. 3 2 2 2 2 2 1 SANS 3668:1998/ISO 3668:1998.Determination of sound power levels of noise sources . Ed. 2 (SABS ISO 3497) SANS 3512:2006/ISO 3512:1992. Ed. 2 2 1 SANS 3574:2003/ISO 3574:1999.Penetrant testing Part 3: Reference test blocks Non-destructive testing . Ed. IDT. IDT. Ed. Ed. Ed. design features and methods of test Cold-reduced carbon steel sheet of commercial and drawing qualities Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities Welding consumables .Engineering methods for small. 2 (SABS ISO 3668) SANS 3696:1987/ISO 3696:1987. IDT.Vocabulary and symbols Part 2: Applied statistics Statistics . 1 (SABS ISO 3743-1) 1 1 1 1 Page 104 .Visual comparison of the colour of paints Water for analytical laboratory use . Ed. 2 1 SANS 3543:2008/ISO 3543:2000. 2 2 Statistics .Tolerances. IDT. 4 (SABS ISO 3759) SANS 3779:1983/ISO 3779:1983. Ed. IDT. IDT. 1 (SABS ISO 3743-2) Edition Title 1 Acoustics . 3 (SABS ISO 3882) SANS 3892:2000/ISO 3892:2000.International standard recording code (ISRC) SANS 3744:1994/ISO 3744:1994. 2 2 SANS 3834-4:2006/ISO 3834-4:2005. IDT. 2 (SABS ISO 3795) SANS 3821:2004/ISO 3821:1998. IDT.Test methods Information and documentation .Vehicle identification number (VIN) Content and structure Road vehicles . 2 2 SANS 3834-5:2006/ISO 3834-5:2005. 2 (SABS ISO 3780) SANS 3795:1989/ISO 3795:1989. Ed.Preparation. Ed. 2 2 SANS 3834-2:2006/ISO 3834-2:2005. Ed. marking and measuring of fabric specimens and garments in tests for determination of dimensional change Road vehicles . Ed. IDT. Ed. 2 (SABS ISO 3744) 1 SANS 3746:1995/ISO 3746:1995. 2 2 SANS 3834-3:2006/ISO 3834-3:2005.Review of methods of measurement of thickness Conversion coatings on metallic materials Determination of coating mass per unit area Gravimetric methods Road vehicles . Ed. IDT. 1 1 SANS 3834-6:2009/ISO/TR 3834-6:2007. Ed.Determination of burning behaviour of interior materials Gas welding equipment .World manufacturer identifier (WMI) code Road vehicles. cutting and allied processes Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2. IDT. 1 1 SANS 3882:2008/ISO 3882:2003. 2 (SABS ISO 3892) SANS 3894:2007/ISO 3894:2005.Rubber hoses for welding.Engineering methods for small. 3 2 2 1 SANS 3901:2009/ISO 3901:2001. Ed. IDT. IDT.Wheels/rims for commercial vehicles . 2 (SABS ISO 3746) 1 SANS 3759:2008/ISO 3759:2007.Standards available in electronic format (PDF) October 2009 SANS Number SANS 3743-2:1994/ISO 3743-2:1994. Ed. Ed.Determination of sound power levels of noise sources using sound pressure .Survey method using an enveloping measurement surface over a reflecting plane Textiles . IDT. 2 1 Page 105 . ISO 3834-3 or ISO 3834-4 Quality requirements for fusion welding of metallic materials Part 6: Guidelines on implementing ISO 3834 Metallic and other inorganic coatings . movable sources in reverberant fields Part 2: Methods for special reverberation test rooms Acoustics .Determination of sound power levels of noise sources using sound pressure . Ed. 3 2 1 1 1 1 SANS 3834-1:2006/ISO 3834-1:2005. Ed. IDT. 3 (SABS ISO 3779) SANS 3780:1983/ISO 3780:1983. IDT. IDT. Ed. Ed.Determination of sound power levels of noise sources using sound pressure . Ed. Ed. IDT. IDT.Engineering method in an essentially free field over a reflecting plane Acoustics . IDT. and tractors and machinery for agriculture and forestry . Ed. IDT. IDT. Ed. Ed. IDT. IDT. 2 (SABS ISO 4065) SANS 4074:2003/ISO 4074:2002.Nomenclature of processes and reference numbers Thermoplastics pipes . Ed. 3 (SABS ISO 4063) SANS 4065:1996/ISO 4065:1996. tests and requirements Destructive tests on welds in metallic materials Transverse tensile test Codes for the representation of currencies and funds Cranes and lifting appliances . 1 1 SANS 3996:2007/ISO 3996:1995. 1 1 SANS 3951-2:2008/ISO 3951-2:2006. Ed. IDT. 2 1 1 SANS 4047:1977/ISO 4047:1977. Ed. 1 1 SANS 3951-5:2008/ISO 3951-5:2006. IDT. 2 Edition Title 1 Dentistry . IDT.Classification . Ed. Ed. Ed.Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid Road vehicles . 1 1 2 1 1 SANS 4091:2005/ISO 4091:2003.Universal wall thickness table Natural latex rubber condoms . IDT. 2 1 SANS 4301-2:2002/ISO 4301-2:1985. IDT. Ed. IDT.Connectors for the electrical connection of towing and towed vehicles Definitions. IDT. Ed.Classification Part 1: General Lifting appliances . Ed. 1 1 Page 106 . Ed. IDT. IDT. IDT.Part 2: Mobile cranes Cranes . Ed.Part 3: Tower cranes SANS 3951-1:2008/ISO 3951-1:2005.Vehicle identification number (VIN) Location and attachment Methods for determination of fibre length by comb sorter diagram Leather .Designation system for teeth and areas of the oral cavity Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-bylot inspection for a single quality characteristic and a single AQL Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) Road vehicles . IDT. 1 1 SANS 4301-3:2002/ISO 4301-3:1993. 2 (SABS ISO 4030) SANS 4044:2007/BS 4044:1989. Ed. Ed. 3 1 SANS 4030:1983/ISO 4030:1983.Classification . 1 1 SANS 3951-3:2008/ISO 3951-3:2007. 1 (SABS ISO 4047) SANS 4063:2005/ISO 4063:1998.Standards available in electronic format (PDF) October 2009 SANS Number SANS 3950:2008/ISO 3950:1995. 3 (SABS ISO 4091) SANS 4136:2004/ISO 4136:2001. IDT. IDT.Requirements and test methods Road vehicles . 7 2 2 1 SANS 4301-1:2002/ISO 4301-1:1986. Ed. Ed.Determination of sulphated total ash and sulphated water-insoluble ash Welding and allied processes . IDT. 2 (SABS ISO 4136) SANS 4217:2009/ISO 4217:2008. IDT. Ed. Ed. 1 1 Cranes other than mobile and floating cranes General requirements for stability Mobile cranes . 2 1 SANS 4381:2005/ISO 4381:2000.Classification Part 5: Overhead travelling and portal bridge cranes Cranes . IDT 1 1 SANS 4378-1:2005/ISO 4378-1:1997.Minimum requirements 1 Leaf-chains. 1 (SABS ISO 4301-5) SANS 4302:2002/ISO 4302:1981. Ed. IDT.Vocabulary Part 3: Tower cranes SANS 4308-1:2005/ISO 4308-1:2003.Coefficient of utilization Cranes .Test code and procedures 1 SANS 4309:2005/ISO 4309:2004.Wire ropes . bearing materials and their properties Plain bearings . weak acid dissociable cyanide. IDT. 1 1 SANS 4378-3:2005/ISO 4378-3:1983. IDT. IDT. IDT. Ed. IDT.Terms. definitions and classification Part 2: Friction and wear Plain bearings . 4 2 Steel wire ropes for lifts . maintenance. 2 (SABS ISO 4348) SANS 4374:2007/ASTM D 4374:2006. installation. 2 1 Page 107 . 1 2 Cranes and lifting appliances . Ed.Selection of wire ropes Part 2: Mobile cranes .Selection of wire ropes Part 1: General Cranes and lifting appliances . IDT. Ed.Copper alloy bushes SANS 4348:1983/ISO 4348:1983. Ed.Wind load assessment 1 SANS 4304:2008/ISO 4304:1987.Determination of stability SANS 4305:2007/ISO 4305:1991. 3 (SABS ISO 4308-1) SANS 4308-2:2007/ISO 4308-2:1988. IDT. Ed. IDT. 2 1 SANS 4378-2:2005/ISO 4378-2:1983. Ed. measuring forces and tensile strengths Flat-top chains and associated chain wheels for conveyors Standard test methods for cyanides in water Automated methods for total cyanide. IDT. Ed. Ed. Ed.Terms. 1 Edition Title 1 Cranes . 3 1 Cranes . Ed. and thiocyanate Plain bearings .Lead and tin casting alloys for multilayer plain bearings Plain bearings . 2 (SABS ISO 4344) SANS 4347:2006/ISO 4347:2004. IDT. IDT. Ed. IDT. IDT.Copper alloys Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings Plain bearings . examination and discard Cranes . 2 1 SANS 4306-3:2007/ISO 4306-3:2003. 3 (SABS ISO 4309) SANS 4310:2002/ISO 4310:1981. definitions and classification Part 3: Lubrication Plain bearings . 3 1 Plain bearings . 1 1 SANS 4379:2005/ISO 4379:1993. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 4301-5:1991/ISO 4301-5:1991.Terms. Ed.Copper alloys Part 2: Wrought copper alloys for solid plain bearings SANS 4382-1:2005/ISO 4382-1:1991. Ed.Dimensions. IDT. IDT.Care. definitions and classification Part 1: Design. IDT. Ed. clevises and sheaves . 1 2 1 SANS 4344:2005/ISO 4344:2004. 2 1 SANS 4382-2:2005/ISO 4382-2:1991. Ed. IDT. Ed. Ed. IDT. Ed. Ed. IDT. 1 1 SANS 4427-5:2008/ISO 4427-5:2007. Ed. 1 (SABS ISO 4522-1) SANS 4522-2:1985/ISO 4522-2:1985.Polyethylene (PE) pipes and fittings for water supply .Profilometric method Electrodeposited metallic coatings and related finishes . IDT.Polyethylene (PE) pipes and fittings for water supply .Part 1: General Plastics piping systems . IDT. IDT.Metallic multilayer plain bearings Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2mm Plain bearings . IDT. Ed. 1 1 SANS 4386-3:2005/ISO 4386-3:1992. Ed. 2 (SABS ISO 4516) SANS 4518:1980/ISO 4518:1980. IDT. 1 1 SANS 4386-1:2005/ISO 4386-1:1992. Ed.Part 5: Fitness for purpose of the system Buried polyethylene (PE) pipes for the supply of gaseous fuels .Compression testing of metallic bearing materials Plain bearings . IDT.Hardness testing of bearing metals Part 2: Solid materials Plain bearings . Ed. IDT. IDT. 1 (SABS ISO 4427) SANS 4427-1:2008/ISO 4427-1:2007. IDT. 2 1 SANS 4384-2:2005/ISO 4384-2:1982. 3 (SABS ISO 4437) SANS 4516:2008/ISO 4516:2002. 1 1 SANS 4427:1996/ISO 4427:1996. 1 (SABS ISO 4522-2) 2 2 1 1 1 1 1 1 Page 108 . 1 (SABS ISO 4521) SANS 4522-1:1985/ISO 4522-1:1985. 1 1 SANS 4385:2005/ISO 4385:1981. Ed. IDT.Part 2: Pipes Plastics piping systems . IDT.Specifications Metallic and other inorganic coatings .Metallic multilayer plain bearings Part 3: Non-destructive penetrant testing Polyethylene (PE) pipes for water supply Specifications Plastics piping systems .Hardness testing of bearing metals Part 1: Compound materials Plain bearings . 1 (SABS ISO 4519) SANS 4520:1981/ISO 4520:1981.Standards available in electronic format (PDF) October 2009 SANS Number SANS 4383:2005/ISO 4383:2000. 1 1 1 SANS 4427-2:2008/ISO 4427-2:2007.Metallic multilayer plain bearings Part 1: Non-destructive ultrasonic testing of bond Plain bearings .Measurement of coating thickness . Ed. Ed. IDT. Ed.Multilayer materials for thin-walled plain bearings Plain bearings . IDT. IDT. 1 (SABS ISO 4518) SANS 4519:1980/ISO 4519:1980.Part 3: Fittings Plastics piping systems . IDT. IDT.Metric series . 3 Edition Title 1 Plain bearings . Ed. Ed. Ed.Polyethylene (PE) pipes and fittings for water supply . Ed. Ed.Electrodeposited silver and silver alloy coatings for engineering purposes Metallic coatings .Sampling procedures for inspection by attributes Chromate conversion coatings on electroplated zinc and cadmium coatings Metallic coatings . 1 1 SANS 4427-3:2008/ISO 4427-3:2007. 2 1 SANS 4386-2:2005/ISO 4386-2:1982. IDT.Vickers and Knoop microhardness tests Metallic coatings .Polyethylene (PE) pipes and fittings for water supply .Test methods for electrodeposited silver and silver alloy coatings Part 2: Adhesion tests SANS 4384-1:2005/ISO 4384-1:2000. IDT. 1 (SABS ISO 4520) SANS 4521:1985/ISO 4521:1985. Ed. Ed. 1 1 SANS 4437:2008/ISO 4437:2007.Test methods for electrodeposited silver and silver alloy coatings Part 1: Determination of coating thickness Metallic coatings . Ed. Ed. Electroplated coatings of nickel plus chromium on plastics materials Metallic coatings . IDT. IDT.Thioacetamide corrosion test (TAA test) Metallic and other non-organic coatings . 2 1 SANS 4624:2008/ISO 4624:2002. Ed.Test methods for electrodeposited gold and gold alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests Metallic coatings . 1 (SABS ISO 4524-5) SANS 4524-6:1988/ISO 4524-6:1988.Sheets made from thermosetting resins Part 2: Determination of properties Plastics . IDT. Ed. IDT. IDT.Determination of average thickness of a sample.Propeller shaft ends and bosses with 1:10 taper High-pressure decorative laminates . IDT. 2 Edition Title 1 Metallic coatings . 1 (SABS ISO 4524-3) SANS 4524-4:1985/ISO 4524-4:1985.Test methods for electrodeposited gold and gold alloy coatings Part 6: Determination of the presence of residual salts Metallic coatings .Corrodkote corrosion test (CORR test) Small craft with inboard engine . IDT. Ed.Electroplated coatings of nickel for engineering purposes Metallic coatings . 1 (SABS ISO 4524-6) SANS 4525:2007/ISO 4525:2003. IDT (SABS ISO 4586-1) SANS 4586-2:1997/ISO 4586-2:1997. 1 (SABS ISO 4522-3) SANS 4523:1985/ISO 4523:1985.Film and sheeting . Ed. Ed.Pull-off test for adhesion 1 1 2 1 1 1 1 2 2 1 1 1 SANS 4586-1:1995/ISO 4586-1:1995.Test methods for electrodeposited gold and gold alloy coatings Part 3: Electrographic tests for porosity Metallic coatings . 4 (SABS ISO 4586-2) SANS 4591:2003/ISO 4591:1992. IDT. IDT.Test methods for electrodeposited gold and gold alloy coatings Part 4: Determination of gold content Metallic coatings . 1 (SABS ISO 4523) SANS 4524-1:1985/ISO 4524-1:1985.Test methods for electrodeposited silver and silver alloy coatings Part 3: Determination of the presence of residual salts Metallic coatings . Ed.Electrodeposited gold and gold alloy coatings for engineering purposes Metallic coatings . by gravimetric techniques (gravimetric thickness) Plastics . 1 (SABS ISO 4541) SANS 4566:2008/ISO 4566:1992. IDT. IDT. IDT. 2 (SABS ISO 4524-2) SANS 4524-3:1985/ISO 4524-3:1985. 2 1 Page 109 . IDT. 2 (SABS ISO 4525) SANS 4526:2007/ISO 4526:2004. IDT. Ed. Ed. Ed. and average thickness and yield of a roll.Determination of thickness by mechanical scanning Paints and varnishes .Test methods for electrodeposited gold and gold alloy coatings Part 1: Determination of coating thickness Metallic coatings . IDT. IDT. Ed. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 4522-3:1988/ISO 4522-3:1988. 2 (SABS ISO 4526) SANS 4538:1978/ISO 4538:1978. Ed. Ed. 2 1 1 1 SANS 4593:2003/ISO 4593:1993. IDT. 1 (SABS ISO 4524-4) SANS 4524-5:1985/ISO 4524-5:1985.Sheets made from thermosetting resins Part 1: Classification and specifications High-pressure decorative laminates . Ed. Ed.Film and sheeting . 1 (SABS ISO 4524-1) SANS 4524-2:2007/ISO 4524-2:2000.Test methods for electrodeposited gold and gold alloy coatings Part 5: Adhesion tests Metallic coatings . 1 (SABS ISO 4538) SANS 4541:1978/ISO 4541:1978. Ed. IDT.Specification for materials Rubber. vulcanized . Ed. IDT. and of intensity of uniform changes in appearance Part 6: Assessment of degree of chalking by tape method Rubber seals . 3 1 SANS 4664:2003/ISO 4664:1998. Ed.Vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum device Rubber. 1 (SABS ISO 4751) 1 Page 110 . 2 1 SANS 4663:2003/ISO 4663:1986.Determination of dynamic behaviour of vulcanizates at low frequencies . Ed. 3 (SABS ISO 4628-1) Edition Title 2 Paints and varnishes . 1 1 SANS 4649:2003/ISO 4649:2002. 2 (SABS ISO 4628-4) 2 SANS 4628-5:2004/ISO 4628-5:2003. IDT. Ed.Evaluation of degradation of coatings .Torsion pendulum method Rubber . and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking Paints and varnishes .Guide to the determination of dynamic properties Gas cylinders . IDT.Preparation of samples and test pieces Part 2: Chemical tests Rubber .Hoses. 2 (SABS ISO 4628-6) 2 SANS 4633:2008/ISO 4633:2002. Ed. Ed. IDT. IDT. IDT.Evaluation of degradation of coatings . Ed. IDT.Evaluation of degradation of coatings .Designation of quantity and size of defects. IDT.Designation of quantity and size of defects. 2 (SABS ISO 4628-2) 2 SANS 4628-3:2004/ISO 4628-3:2003. and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering Paints and varnishes . 2 (SABS ISO 4628-3) 2 SANS 4628-4:2004/ISO 4628-4:2003. IDT. 3 1 SANS 4635:2004/ISO 4635:1982. Ed. IDT. for firefighting service Rubber . 2 2 SANS 4751:1984/ISO 4751:1984. IDT. IDT. IDT. IDT.Designation of quantity and size of defects.Refillable welded steel cylinders Test pressure 60 bar and below Copper and copper alloys . Ed. and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting Paints and varnishes . and of intensity of uniform changes in appearance Part 5: Assessment of degree of flaking Paints and varnishes . Ed. Ed. Ed. 1 1 SANS 4642:2007/ISO 4642:1978.Designation of quantity and size of defects. and of intensity of uniform changes in appearance Part 1: General introduction and designation system Paints and varnishes .Standards available in electronic format (PDF) October 2009 SANS Number SANS 4628-1:2004/ISO 4628-1:2003.Designation of quantity and size of defects. Ed. 3 1 SANS 4706:2009/ISO 4706:2008.Evaluation of degradation of coatings .Evaluation of degradation of coatings .Specification for material Rubber products . Ed. non-collapsible. IDT. drainage and sewerage pipelines . vulcanized . 2 (SABS ISO 4628-5) 2 SANS 4628-6:2007/ISO 4628-6:2007. 1 1 SANS 4662:2003/ISO 4662:1986. 2 1 SANS 4661-2:2003/ISO 4661-2:1987.Determination of tin content . Ed. Ed.Preformed compression seals for use between concrete motorway paving sections .Spectrometric method SANS 4628-2:2004/ISO 4628-2:2003.Joint rings for water supply.Designation of quantity and size of defects.Determination of rebound resilience of vulcanizates Rubber .Evaluation of degradation of coatings . IDT. 1 (SABS ISO 4778) SANS 4787:1984/ISO 4787:1984. 3 1 1 2 Knitting . Ed. 1 (SABS ISO 4788) SANS 4788:2009/ISO 4788:2005.Determination of tuft withdrawal force 1 1 2 2 2 SANS 4832:2007/ISO 4832:2006. IDT. 1 (SABS ISO/TR 4918) SANS 4919:1978/ISO 4919:1978. Ed. criteria of compliance of a batch with sterility requirements Sterility of liquids SANS 4930:2009/ISO 4930:2006. Ed. 2 (SABS ISO 4788) SANS 4800:1998/ISO 4800:1998.Grades M(4).Graduated measuring cylinders Laboratory glassware . IDT. IDT. IDT.Vibration of buildings . Ed.Colony-count technique at 30 °C Mechanical vibration and shock . Ed.) Road vehicles . IDT. Ed. Ed. 2 (SABS ISO 4800) SANS 4831:2007/ISO 4831:2006. IDT. Ed. 3 (SABS ISO 4831) Edition Title 1 Chain slings of welded construction . IDT. IDT. IDT. Ed.Determination of wear Castor chair test Carpets . Ed.Vocabulary 2 Road vehicles .Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 °C max.Volumetric glassware Methods for use and testing of capacity Laboratory glassware . Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 4778:1981/ISO 4778:1981.Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps Textile floor coverings . IDT. 1 (SABS ISO 4787) SANS 4788:1980/ISO 4788:1980.Guidelines for the measurement of vibrations and evaluation of their effects on buildings Plastics . IDT. Ed. IDT. 2 (SABS ISO 4921) SANS 4928:2009/ISO 4928:2006. 1 (SABS ISO 4866) SANS 4892-2:2008/ISO 4892-2:2006.Basic concepts .Graduated measuring cylinders Laboratory glassware .) Continuous hot-dip zinc-coated carbon steel sheet of structural quality Sterility testing: sampling. 3 (SABS ISO 4833) SANS 4866:1990/ISO 4866:1990. 3 (SABS ISO 4832) SANS 4833:2007/ISO 4833:2003.Most probable number technique Microbiology of feed and animal feeding stuffs Horizontal method for the enumeration of coliforms Colony-count technique Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of microorganisms . Ed. IDT.Separating funnels and dropping funnels Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of coliforms .Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (Service temperature 120 °C max. Ed. S(6) and T(8) Laboratory glassware . IDT. Ed. Ed. 2 2 2 1 1 SANS 4918:1990/ISO/TR 4918:1990. IDT. 1 (SABS ISO 4919) SANS 4921:2000/ISO 4921:2000. 4 (SABS ISO 4998) SANS 5001:1971 (SABS SM 1) SANS 5002:1987 (SABS SM 2) SANS 5003:1987 (SABS SM 3) 2 2 3 3 Sterility of solid materials Page 111 . 2 2 SANS 4998:2007/ISO 4998:2005. limit test 3 Dextrose content of solutions 3 Visible suspended matter and sediment in pharmaceutical products Paints and varnishes .Projection microscope method Brown coals and lignites . Ed.Spraying properties of paints 3.01 4 3 1 Industrial trucks . IDT. 1 3 Sodium chloride and total chloride content of solutions Heavy metals in pharmaceutical solutions.Determination of true relative density and apparent relative density Hard coal . Ed. 1 Edition Title 3 Sterility of antibiotics and preparations containing antibiotics Pyrogenicity of pharmaceutical products (derived from BP 1988) Extractable volume of a pharmaceutical product in a container Limit of alkalinity of glass containers for pharmaceutical products Water quality . IDT. Ed. IDT.Determination of pH 4 4 3 5 SANS 5012:1987 (SABS SM 12) SANS 5014:1987 (SABS SM 14) SANS 5016:1975 (SABS SM 16) SANS 5018:1975 (SABS SM 18) SANS 5019:1975 (SABS SM 19) SANS 5030:2006 (SABS SM 30) SANS 5037:2003 (SABS SM 37) SANS 5044:2005 (SABS SM 44) SANS 5057:2007/ISO 5057:1993. Ed.Preparation of laboratory test samples and test specimens for chemical testing 1 SANS 5074:1994/ISO 5074:1994.Application by applicator blade Paints and varnishes .Panels for testing: Fibrecement panels Paints and varnishes . IDT. 1 3 3 Anticoagulant acid citrate dextrose solution. 1 (SABS ISO 5089) 1 1 Page 112 . limit test 3 2 Arsenic in pharmaceutical products.Inspection and repair of fork arms in service on fork-lift trucks Potassium chloride content of solutions SANS 5063:1975 (SABS SM 63) SANS 5064:1975 (SABS SM 64) SANS 5067:1975 (SABS SM 67) SANS 5071:2007 (SABS SM 71) SANS 5072:2005/ISO 5072:1997. Ed. 2 (SABS ISO 5074) SANS 5089:1977/ISO 5089:1977. identification of Citric acid content of pharmaceutical products 2 3 Fibre diameter of textile fibres .Determination of Hardgrove grindability index Textiles . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5004:1987 (SABS SM 4) SANS 5006:1992 (SABS SM 6) SANS 5009:1987 (SABS SM 9) SANS 5010:1975 (SABS SM 10) SANS 5011:2005/ISO 10523:1994. 1 (SABS ISO 5151) SANS 5153:2003 (SABS SM 153) Edition Title 4 Bow and skewness in woven textile fabrics 3 Water resistance of textile fabrics: Hydrostatic head test Water resistance .Determination of through-dry state and through-dry time Non-ducted air conditioners and heat pumps Testing and rating for performance Paints and varnishes .01 3 3 Paints and varnishes .Sanding properties of paint films Paints and varnishes .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5091:2007 (SABS SM 91) SANS 5099:2005 (SABS SM 99) SANS 5100:2005 (SABS SM 100) SANS 5101:2004 (SABS SM 101) SANS 5102:2004 (SABS SM 102) SANS 5113:2005 (SABS SM 113) SANS 5114:2006 (SABS SM 114) SANS 5115:2005 (SABS SM 115) SANS 5117:2005 (SABS SM 117) SANS 5123:2005 (SABS SM 123) SANS 5125:2007 (SABS SM 125) SANS 5126:2008 (SABS SM 126) SANS 5127:2006 (SABS SM 127) SANS 5136:2005 (SABS SM 136) SANS 5137:2005 (SABS SM 137) SANS 5142:2005 (SABS SM 142) SANS 5146:2005 (SABS SM 146) SANS 5148:2003 (SABS SM 148) SANS 5151:1994/ISO 5151:1994.Resistance to impact of paint films Paints and varnishes . Ed.Formulae used in statistical analysis 4 2 3 Paints and varnishes .Resistance to sheen development of paint films Paints and varnishes . 0° luminous directional reflectance of surface coatings and pigments Paints and varnishes .Determination of viscosity by means of an efflux cup Viscosity of binders for paints 3.Daylight 45°.Determination of viscosity by means of a Stormer viscometer 3 3 3 3 4 1 4 Page 113 .Water-repellency of fabrics permeable to air (Bundesmann test) Water resistance of textile fabrics: drop penetration test Water resistance of textile fabrics: short period cone test Non-fibrous material content of wool 3 3 3 4 5 Non-fibrous material content of textiles (method using starch-digesting enzymes) Fluidity of cotton and certain cellulosic man-made fibres in cuprammonium solution (modified method) Textiles .Apparent water absorption of paint films Paints and varnishes .General appearance of oils and clear varnishes Paints and varnishes . IDT. 01 1. Ed. male taper 1:10 Part 1: Conical fixing. taper 1:10 Resistance spot welding . IDT. 1 (SABS ISO 5184) SANS 5185:2006 (SABS SM 185) SANS 5186:2006 (SABS SM 186) SANS 5187:2006 (SABS SM 187) SANS 5188:2006 (SABS SM 188) SANS 5189:2004 (SABS SM 189) SANS 5190:2004 (SABS SM 190) SANS 5197:2007 (SABS SM 197) SANS 5201:2005 (SABS SM 201) SANS 5203:2004 (SABS SM 203) SANS 5207:2004 (SABS SM 207) Edition Title 2 Household refrigerating appliances .01 2 Stretched width of mutton cloth 1 Welding . IDT.Iron content Page 114 .01 Water .Materials for resistance welding electrodes and ancillary equipment Resistance welding equipment . IDT.01 Water . Ed. Ed.Electrode adaptors.Frozen food storage cabinets and food freezers .Turbidity 3.Determination of resistance to cold water Paints and varnishes .Determination of washability (brush method) Textile fabrics: tearing strength of selvedges 4 2. IDT.01 3 Paints and varnishes .01 Water .01 Water insoluble matter content of soap products 3 Water . 2 (SABS ISO 5183-1) SANS 5183-2:2008/ISO 5183-2:2000. male taper 1:10 Part 2: Parallel shank fixing for end-thrust electrodes Straight resistance spot welding electrodes 2 2 1 2 Total alkali content of soap powders or chips 2 Alkaline salt content of scouring compounds 2 Fatty matter content of soap products 2 Unsaponified plus unsaponifiable matter content of soap products Alcohol-insoluble matter content of soap products 2.Temperature stability 3. IDT. Ed.Cadmium content 3. 2 (SABS ISO 5155) SANS 5160:2007 (SABS SM 160) SANS 5167:2005 (SABS SM 167) SANS 5175:2003 (SABS SM 175) SANS 5176:2007 (SABS SM 176) SANS 5178:2006 (SABS SM 178) SANS 5182:1991/ISO 5182:1991. 2 (SABS ISO 5183-2) SANS 5184:1979/ISO 5184:1979.Characteristics and test methods Paints and varnishes .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5155:1995/ISO 5155:1995. Ed.Copper content 3.Electrode adaptors. 2 (SABS ISO 5182) SANS 5183-1:2008/ISO 5183-1:1998. 03 Microbiological analysis of water .Dissolved solids content 3.Free and saline ammonia content 2 Water .Oxygen absorption 4.Albuminoid ammonia content 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5208:2004 (SABS SM 208) SANS 5209:2005 (SABS SM 209) SANS 5210:2006 (SABS SM 210) SANS 5213:2005 (SABS SM 213) SANS 5214:2005 (SABS SM 214) SANS 5217:2007 (SABS SM 217) SANS 5218:2007 (SABS SM 218) SANS 5220:2005 (SABS SM 220) SANS 5221:2007 (SABS SM 221) SANS 5222:2004 (SABS SM 222) SANS 5223:2006 (SABS SM 223) SANS 5224:2006 (SABS SM 224) SANS 5225:2006 (SABS SM 225) SANS 5226:2006 (SABS SM 226) SANS 5228:2006 (SABS SM 228) SANS 5230:2006 (SABS SM 230) SANS 5231:2005 (SABS SM 231) SANS 5232:2006 (SABS SM 232) SANS 5233:2007 (SABS SM 233) SANS 5235:2008 (SABS SM 235) SANS 5236:2009 (SABS SM 236) Edition Title 3.01 Water .01 4 3 Pesticides .01 Water .Biological evaluation of the efficacy of mists and fogs Standard test method for the determination of the diastatic power of malts prepared from sorghum including bird-proof varieties.General test methods Identification of rosin in fatty matter 1.Manganese content 2.Nitrate and nitrite content 2.02 Water . and from millet Bacteriostatic efficacy of water miscible liquids 2 2 Page 115 .02 Water .01 2 Rosin content of fatty matter in soaps 2 Chloride content of soap products (potentiometric method) Carbolic acid content of carbolic soap 2 2 Volatile matter content of scouring compounds 2 Titre of fatty matter in soaps 2 Fineness of water-insoluble matter of scouring compounds Soap powder or soap chips .02 Water .01 Water .Determination of fineness Abrasive number of scouring compounds 2.01 Water .Zinc content 3.Lead content 3. 01 4 Water resistance of textile fabrics: Variable head test Threads per centimetre in narrow woven textile fabrics Turns per metre of final folding twist and twist variation of textile yarns 3 3 Page 116 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5237:2005 (SABS SM 237) SANS 5247:2007 (SABS SM 247) SANS 5249:2006 (SABS SM 249) SANS 5250:2006 (SABS SM 250) SANS 5251:2006 (SABS SM 251) SANS 5252:2006 (SABS SM 252) SANS 5254:2003 (SABS SM 254) SANS 5255:2003 (SABS SM 255) SANS 5256:2005 (SABS SM 256) SANS 5257:2005 (SABS SM 257) SANS 5258:2004 (SABS SM 258) SANS 5259:2005 (SABS SM 259) SANS 5260:2004 (SABS SM 260) SANS 5261:2009 (SABS SM 261) SANS 5262:2006 (SABS SM 262) SANS 5263:2005 (SABS SM 263) SANS 5264:2006 (SABS SM 264) SANS 5265:2007 (SABS SM 265) SANS 5266:2005 (SABS SM 266) SANS 5267:2005 (SABS SM 267) SANS 5270:2004 (SABS SM 270) Edition Title 2 Chlorine retention of fabrics: reduction in breaking strength method Textiles .Determination of loop strength Bactericidal efficacy of anti-bacterial liquid toilet soap Snarling twist in textile yarns 3.Yarns from packages .01 3 5 Water absorption rate of textile fabrics 4 Pile-to-ground length ratio of warp yarns in textile fabrics with uncut pile Air permeability of textile fabrics 3.Nep count of cotton wool 4 2 Determination of the absorbency rate of absorbent cotton wool Water-soluble matter content of textiles 3 2 Effect of heat on absorbent cotton wool 2 Determination of the presence of oxidizing substances in surgical dressings Determination of the presence of alkalinity in surgical dressings Determination of the presence of acidity in surgical dressings Presence of dyes in absorbent cotton wool 2 2 3 4 Ash content of textile surgical dressings 3 Buoyancy of fibre fillers for life jackets 5 Test for buoyancy of life-jackets 3 Textiles . 01 Breaking strength of seams in textiles 3 Skein strength and tenacity. and linear density of spun textile yarns on packages Tear resistance of textile felts 3 3 Mass per unit length of conditioned textile fabrics Page 117 .Rearing and handling of the skin and hide beetle (Dermestes maculatus de Geer) Length of textile shoe laces 3 2 Number of interlacing threads in a braid 3 Mass per 100 m of textile shoe laces 3 Plaits per centimetre in a textile braid 3 Colour-bleeding (in water) of textile shoe laces 3 Abrasion resistance of textile shoe laces (without core) and similar articles Feathers and down .Scouring test 3 3.Rearing and handling of the Mediterranean flour moth (Ephestia kuehniella Zeller) Water repellency of textile fabrics (Spray test) 4 3 Splitting resistance of textile felts 3 Pesticides .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5272:2007 (SABS SM 272) SANS 5274:2006 (SABS SM 274) SANS 5275:2004 (SABS SM 275) SANS 5276:2005 (SABS SM 276) SANS 5277:2009 (SABS SM 277) SANS 5278:2005 (SABS SM 278) SANS 5299:2008 (SABS SM 299) SANS 5300:2005 (SABS SM 300) SANS 5301:2005 (SABS SM 301) SANS 5302:2009 (SABS SM 302) SANS 5311:2006 (SABS SM 311) SANS 5312:2005 (SABS SM 312) SANS 5313:2005 (SABS SM 313) SANS 5314:2005 (SABS SM 314) SANS 5315:2004 (SABS SM 315) SANS 5316:2005 (SABS SM 316) SANS 5322:2005 (SABS SM 322) SANS 5323:2008 (SABS SM 323) SANS 5326:2007 (SABS SM 326) SANS 5328:2005 (SABS SM 328) SANS 5330:2005 (SABS SM 330) Edition Title 3 Non-fibrous material content of textiles Hydrochloric acid method Alkali-solubility of flax materials 3 4 Wales and courses per unit length in knitted textile fabrics (counting glass method) Non-fibrous material content of textiles (physical separation method) Resistance to attack by Chaetomium globosum 3 4 4 Sewing stitches per unit length 3 Pesticides . detection 3 Flex cracking of coated textile fabrics 3 Degree of blocking of coated textile fabrics 3 Water absorption of plastics filler foam for life jackets Tensile strength and extension at break: modified (dumb-bell) strip method Accelerated aging of coated textile fabrics 3.01 3.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5334:2008 (SABS SM 334) SANS 5369:2005 (SABS SM 369) SANS 5370:2005 (SABS SM 370) SANS 5385:2005 (SABS SM 385) SANS 5386:1987 (SABS SM 386) SANS 5411:2005 (SABS SM 411) SANS 5412:2005 (SABS SM 412) SANS 5413:2006 (SABS SM 413) SANS 5414:2007 (SABS SM 414) SANS 5415:2005 (SABS SM 415) SANS 5417:2005 (SABS SM 417) SANS 5418:2005 (SABS SM 418) SANS 5419:2009 (SABS SM 419) SANS 5420:2007 (SABS SM 420) SANS 5421:2007 (SABS SM 421) SANS 5422:2007 (SABS SM 422) SANS 5448:2006 (SABS SM 448) SANS 5449:2005 (SABS SM 449) SANS 5450:2007 (SABS SM 450) SANS 5451:2004 (SABS SM 451) SANS 5452:2005 (SABS SM 452) Edition Title 5 Pesticides .Biological evaluation of insecticidal sprays on compost (laboratory test) Effect of heat on appearance and texture of textile fabrics Dimensional changes of made-up textile articles 3 3 3 3.Evaluation of rodentproofness of building materials and constructions Gripping strength of tags on textile shoe laces 3 3.01 3 3 Density of foamed plastic fillers for life jackets 3 Dimensional changes of textile fabrics during steam pressing Pesticides .)) Dimensions of hosiery 3 3 Dimensional changes of hosiery during relaxation 3 Mass per unit area of conditioned knitted textiles 3 Potassium in solutions.Rearing and handling of the common housefly (Musca domestica (L.01 Slip resistance of textile shoe laces and similar articles Pesticides .01 Colour fastness of buttons to washing 3 Colour fastness of buttons to dry cleaning 2 Method of obtaining test samples of cleaning waste Page 118 . Standards available in electronic format (PDF) October 2009 SANS Number SANS 5457:1977 (SABS SM 457) SANS 5458:2008 (SABS SM 458) SANS 5459:2008 (SABS SM 459) SANS 5460:2008 (SABS SM 460) SANS 5461:2008 (SABS SM 461) SANS 5462:2008 (SABS SM 462) SANS 5464:2005 (SABS SM 464) SANS 5469:2009 (SABS SM 469) SANS 5471:2006 (SABS SM 471) SANS 5472:2009 (SABS SM 472) SANS 5483:2006/ISO 1833:1977.)) Pesticides .Wet hiding power (brush-out method) Soil burial 4 4 4 4 4 4 2 2.)) Paints and varnishes .)) Pesticides .01 Ball burst strength of textile fabrics 3 Burning test on cable dielectric and outer coverings 3.Rearing and handling of the granary weevil (Sitophilus granarius (L. MOD (SABS SM 483) SANS 5484:2009 (SABS SM 484) SANS 5486:2007 (SABS SM 486) SANS 5488:2005 (SABS SM 488) SANS 5492:2007 (SABS SM 492) SANS 5493:2008 (SABS SM 493) SANS 5502:2009 (SABS SM 502) SANS 5506:2008 (SABS SM 506) SANS 5509:2009 (SABS SM 509) SANS 5511:2008 (SABS SM 511) SANS 5513:2007 (SABS SM 513) Edition Title 3 Pesticides: Rearing and handling of the American cockroach (Periplaneta Americana (L.01 Pesticides .01 Tear resistance of rubber cable sheathing 2.01 Bactericidal efficacy of disinfectants: Kelsey Sykes test (modified) Oil resistance of vehicle ignition cables 3 3 Dripping test on braided and impregnated heatresistant cables Page 119 .)) Pesticides .Rearing and handling of the rice weevil (Sitophilus oryzae (L.)) Pesticides .Biological evaluation of the resistance of materials to termite attack Resistance to fungal attack by Aspergillus niger 2 2 Non-fibrous material content of textiles (petroleum ether and water extraction method) Resistance to fungal attack by mixed fungi 3 3 Seam slippage 2 Width of ribbons and other narrow fabrics 3 Runnage of twines 4.Rearing and handling of the confused flour beetle (Tribolium confusum (Duv.Rearing and handling of the German cockroach (Blatella germanica (L.)) Pesticides .Rearing and handling of the yellow fever mosquito (Aedes aegypti (L. Insecticidal oil-based space sprays in low-pressurized dispensers . IDT.Insecticidal oil-based space sprays in low-pressurized dispensers .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5514:2007 (SABS SM 514) SANS 5515:2007 (SABS SM 515) SANS 5516:2007 (SABS SM 516) SANS 5526:2007 (SABS SM 526) SANS 5529:2007 (SABS SM 529) SANS 5537:2005/ISO 5537:2004.Insecticidal oil-based space sprays in low-pressurized dispensers: Determination of internal pressure of filled dispensers Pesticides: Insecticidal oil-based space sprays in low-pressurized dispensers: Determination of delivery rate Pesticides . transverse and edgewise) on copper strip or sheet Pigment volume concentration of paints with a nonaqueous solvent base Determination of selenium in copper 3 1 3 Pesticides . tube.Insecticidal oil-based space sprays in low-pressurized dispensers . sheet. bar.Determination of moisture content (Reference method) Dimensions of aluminium and copper strip. rod. 1 Edition Title 3 Flexibility of braided and impregnated heat-resistant cables Flexing test on flexible cords 3 4 Kink resistance of circular flexible cords 3 Dielectric resistance of electric cables 3 Power frequency electrical puncture test on ignition cables Dried milk . channel and angle Sterility of syringes and needles 1 SANS 5544:2008 (SABS SM 544) SANS 5548:1987 (SABS SM 548) SANS 5550:1993 (SABS SM 550) SANS 5553:2008 (SABS SM 553) SANS 5557:2009 (SABS SM 557) SANS 5560:2005 (SABS SM 560) SANS 5566:1968 (SABS SM 566) SANS 5568:2003 (SABS SM 568) SANS 5569:2003 (SABS SM 569) SANS 5570:2007 (SABS SM 570) SANS 5571:2007 (SABS SM 571) SANS 5572:2007 (SABS SM 572) SANS 5573:1970 (SABS SM 573) SANS 5574:1970 (SABS SM 574) 3 3 2 Potency of antibiotics .Determination of crazing effect on organic glass (polyacrylate sheet) Pesticides: insecticidal oil-based space sprays in low-pressurized dispensers: determination of staining effect on painted surfaces Pesticides: Insecticidal oil-based space sprays in low-pressurized dispensers: determination of staining effect on multifibre test fabric 3 3 3 3 2 2 Page 120 .Microbiological agar diffusion method of assay (two-point technique) Media and reagents for microbiological tests 2 3 Bending tests (longitudinal.Determination of the combustibility (closed drum test) Pesticides .Determination of nonvolatile content Pesticides . Ed. Biological evaluation of the efficacy of insecticidal water-based and oil-based space sprays in low pressurized dispensers Pesticides . elastomeric material and other footwear materials) Determination of water content in leather 3 2 3 Leather .Testing of valves of filled insecticidal low-pressurized dispensers for clogging Pesticides .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5575:2007 (SABS SM 575) SANS 5576:2003 (SABS SM 576) SANS 5583:2004 (SABS SM 583) SANS 5584:1970 (SABS SM 584) SANS 5585:2003 (SABS SM 585) SANS 5591:1975 (SABS SM 591) SANS 5602:2006 (SABS SM 602) SANS 5607:2005 (SABS SM 607) SANS 5614:2009 (SABS SM 614) SANS 5615:1968 (SABS SM 615) SANS 5616:2001 (SABS SM 616) SANS 5617:2001 (SABS SM 617) SANS 5618:2001 (SABS SM 618) SANS 5619:2001 (SABS SM 619) SANS 5620:1972 (SABS SM 620) SANS 5621:2009 (SABS SM 621) SANS 5624:1972 (SABS SM 624) SANS 5625:1990 (SABS SM 625) SANS 5626:1992 (SABS SM 626) SANS 5627:1972 (SABS SM 627) SANS 5628:1972 (SABS SM 628) Edition Title 2 Pesticides .01 1 Preparation of samples and extracts used in testing plastics for medical use Water-soluble size content of woven textile fabrics 2 3 Creepage (of woven textile fabrics) 3 Resistance to growth of Trichophyton interdigitale 1 Method for the sampling of leather and other footwear materials Preparation of samples (leather.pH value and difference figure of an aqueous extract Determination of magnesium sulphate content of leather by complexometric titration Determination of perspiration resistance of lining leather 2 2 Page 121 .Matter extractable by petroleum ether 3 Determination of water-soluble matter content in leather Determination of sulphated ash content of watersolubles in leather Determination of total ash content of leather 2 3 2 Determination of hide substance of leather 2 Leather .Biological evaluation of the contact efficacy of liquid residual insecticides Field trials of agricultural crops for pesticide residue analysis Pesticides: Sieving of wettable powders 4 3 1 2.Determination of chromic oxide content 3 Leather and footwear components . footwear upper and lining materials .Flex endurance Identification of organic retanned matter in chrome retanned leather Determination of density of elastomeric material 3 2 2 2 Determination of hardness of elastomeric material Page 122 .Determination of apparent density Determination of resistance to grain cracking of leather Determination of dynamic waterproofness of sole leather Determination of wet stitch tear strength (leather. (b) percentage elongation caused by a specified force.Impact resistance 2 1 2 2 3 3 2 Determination of bond strength of rib attachment (stuck-on rib inner soles) Leather. (c) percentage elongation at break of leather Determination of tearing strength 3 1 Determination of dynamic waterproofness of upper leather Determination of two-dimensional extension of leather Determination of flex resistance (leather fibreboard and cellulose fibreboard inner soles) Determination of wet and dry bursting strengths of stiffeners Determination of water absorption of inner soles and inner-sole material Accumulated impact strength of toe-puff materials and the degree of softening of toe-puffs Safety footwear . fibreboard) Determination of wet compressibility of leather and fibreboards Shrinkage temperature of leather 1 1 1 2 3 2 Determination of (a) tensile strength. leatherboard.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5629:1993 (SABS SM 629) SANS 5630:1968 (SABS SM 630) SANS 5632:1968 (SABS SM 632) SANS 5633:1968 (SABS SM 633) SANS 5634:1972 (SABS SM 634) SANS 5635:1990 (SABS SM 635) SANS 5636:1972 (SABS SM 636) SANS 5637:2000 (SABS SM 637) SANS 5638:1968 (SABS SM 638) SANS 5639:1972 (SABS SM 639) SANS 5640:1968 (SABS SM 640) SANS 5641:1972 (SABS SM 641) SANS 5642:1972 (SABS SM 642) SANS 5644:1988 (SABS SM 644) SANS 5645:1994 (SABS SM 645) SANS 5646:1972 (SABS SM 646) SANS 5647:1993 (SABS SM 647) SANS 5648:1972 (SABS SM 648) SANS 5649:1972 (SABS SM 649) SANS 5650:1972 (SABS SM 650) Edition Title 3 Leather and fibreboard . 2 (SABS ISO 5667-1) SANS 5667-2:1991/ISO 5667-2:1991. IDT. 3 (SABS ISO 5667-3) SANS 5667-4:1987/ISO 5667-4:1987. Ed.Sampling Part 2: Guidance on sampling techniques Water quality .Abrasion resistance of elastomeric material Resistance to creep of adhesive bonds 1 1 1 1 2 2 2 Footwear .Sampling Part 3: Guidance on the preservation and handling of water samples Water quality . elongation at break. natural and man-made Water quality .Sampling Part 4: Guidance on sampling from lakes. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5651:1989 (SABS SM 651) SANS 5652:1972 (SABS SM 652) SANS 5653:1972 (SABS SM 653) SANS 5654:1972 (SABS SM 654) SANS 5655:1972 (SABS SM 655) SANS 5656:1972 (SABS SM 656) SANS 5660:1968 (SABS SM 660) SANS 5661:1968 (SABS SM 661) SANS 5662:1973 (SABS SM 662) SANS 5663:1973 (SABS SM 663) SANS 5664:1994 (SABS SM 664) SANS 5665:2005 (SABS SM 665) SANS 5666:1994 (SABS SM 666) SANS 5667-1:2008/ISO 5667-1:2006. and tensile stress at specified elongation of elastomeric material (footwear) Determination of split tear strength of elastomeric material Determination of heat shrinkage of elastomeric material Determination of compression set of elastomeric material Determination of flammability of elastomeric material 2 2 2 2 2 Determination of swelling of elastomeric material in swelling liquids Determination of adhesion of outer soles to upper material (stuck-on) Determination of adhesion of upper leather to direct moulded rubber soling material Determination of peeling load (outer soles to canvas uppers) on canvas shoes Determination of adhesion between foxing and canvas uppers in canvas shoes Footwear materials . 2 (SABS ISO 5667-2) SANS 5667-3:2006/ISO 5667-3:2003. Ed.Sampling Part 10: Guidance on sampling of waste waters 1 2 1 2 2 1 Page 123 . 1 Edition Title 2 Tensile strength.Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques Water quality . Ed. IDT. Ed. 1 (SABS ISO 5667-4) SANS 5667-5:2006/ISO 5667-5:2006. IDT. IDT. 2 (SABS ISO 5667-5) SANS 5667-6:2006/ISO 5667-6:2005. 2 (SABS ISO 5667-6) SANS 5667-10:2007/ISO 5667-10:1992. IDT. Ed.Sampling Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems Water quality .Cut growth resistance 2 Water quality . IDT.Soling material .Sampling Part 6: Guidance on sampling of rivers and streams Water quality . IDT. Sampling Part 18: Guidance on sampling of groundwater at contaminated sites Measurement of set in lasting of leather with the dome plasticity apparatus Measurement of distension and strength of grain of leather by the ball burst test Leather and footwear materials .Water vapour permeability Efficacy of algaecides 1 SANS 5667-14:2007/ISO 5667-14:1998.01 2.Biological evaluation of knock-down and killing properties of liquid and aerosol formulations Pesticides . 1 (SABS ISO 5667-15) SANS 5667-18:2007/ISO 5667-18:2001. 1 1 1 2 2.01 Determination of shade depth class 2 Pesticides . IDT (SABS ISO 5667-11) SANS 5667-13:2007/ISO 5667-13:1997. 1 1 Page 124 . IDT.Biological evaluation of the efficacy of insecticide dusting powders Pesticides . IDT. 1 Edition Title 1 Water quality .Biological evaluation of the properties of solid fly baits Pesticides .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5667-11:1993/ISO 5667-11:1993.Sampling Part 14: Guidance on quality assurance of environmental water sampling and handling Water quality .Aromatic plus heterocyclic fraction content and naphthenic plus paraffinic fraction content of insecticidal petroleum base oils Pesticides . Ed. 1 1 1 SANS 5668:1973 (SABS SM 668) SANS 5669:1973 (SABS SM 669) SANS 5670:1994 (SABS SM 670) SANS 5682:2006 (SABS SM 682) SANS 5683:2006 (SABS SM 683) SANS 5686:2007 (SABS SM 686) SANS 5687:2007 (SABS SM 687) SANS 5689:2002 (SABS SM 689) SANS 5690:2003 (SABS SM 690) SANS 5693:2007 (SABS SM 693) SANS 5694:2007 (SABS SM 694) SANS 5695:1978 (SABS SM 695) SANS 5696:1978 (SABS SM 696) SANS 5725-1:2009/ISO 5725-1:1994.Biological testing of the efficacy of rodenticides Pesticides: Biological evaluation of the efficacy of mosquito repellants Pesticides: Biological evaluation of the efficacy of residual sprays against skin and hide beetles Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method 2 3 3 3 3 2 2 1 SANS 5725-2:2009/ISO 5725-2:1994. IDT. IDT.Oil content and emulsifier content of emulsifiable concentrates of insecticidal petroleum oils Pesticides .Sampling Part 11: Guidance on sampling of groundwaters Water quality .Sampling Part 13: Guidance on sampling of sludges from sewage and water treatment works Water quality . Ed.Sampling Part 15: Guidance on preservation and handling of sludge and sediment samples Water quality . 1 1 SANS 5667-15:1999/ISO 5667-15:1999. IDT. Ed. Ed. Ed. IDT. Ed. IDT. Ed. IDT. 2 1 SANS 5766:2005 (SABS SM 766) SANS 5768:2004 (SABS SM 768) 2 2 SANS 5770:2004 (SABS SM 770) 2 SANS 5771:2005 (SABS SM 771) 2 Page 125 . 1 1 SANS 5725-5:2009/ISO 5725-5:1998. Ed. Ed. 1 1 SANS 5725-6:2009/ISO 5725-6:1994.Test for the assessment of cleanliness of blast-cleaned steel surfaces . 1 Edition Title 1 Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values Seaming properties of woven textile fabrics SANS 5725-4:2009/ISO 5725-4:1994. 1 1 SANS 5726:2007 (SABS SM 726) SANS 5730:2009 (SABS SM 730) SANS 5732:1971 (SABS SM 732) SANS 5748:2006 (SABS SM 748) SANS 5754:2007 (SABS SM 754) SANS 5761:2008 (SABS SM 761) SANS 5762:2008 (SABS SM 762) SANS 5763:2006 (SABS SM 763) 3 2 Antibacterial efficacy of solid and semi-solid antiseptics Tin content of tin and lead alloys 1 2 Specific surface of cement 2 Autoclave expansion of cement 2 Examination for the presence of viable spores of mesophilic Clostridium organisms in foods Examination for the presence of viable Bacillus anthracis in foods Efficacy of cleaning plant.Test for the assessment of cleanliness of blast-cleaned steel surfaces .Photo-electric reflectance measurement Preparation of steel substrates before the application of paints and related products . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5725-3:2009/ISO 5725-3:1994.Test for the assessment of cleanliness of blast-cleaned steel surfaces .Determination of freezing point . IDT.Freedom from certain soluble salts Preparation of steel substrates before the application of paints and related products . Ed. Ed. equipment and utensils: swab technique Milk . IDT.Thermistor cryoscope method (Reference method) Measurement of girth and length extended dimensions of pantyhose Preparation of steel substrates before the application of paints and related products .Detection of residual millscale 2 2 SANS 5764:2005/ISO 5764 IDF 108:2002. and plates 2 Resistance of saucers and plates to chipping 2 Resistance of crockery to crazing 2 Resistance of crockery to thermal shock 2 Water absorption of crockery 2 Resistance of crockery decoration to detergents and alkalis Metal release from glazed crockery (plain or decorated).Surface roughness characteristics of blast-cleaned steel surfaces . test conditions. saucers.01 3. test equipment.Profile of blast-cleaned surfaces determined by a micrometer profile gauge Preparation of steel substrates before the application of paints and related products .Profile of blast-cleaned surfaces determined by metallographic section Redeposition index of laundry detergents SANS 5775:2004 (SABS SM 775) 2 SANS 5778:2008 (SABS SM 778) SANS 5779:2008 (SABS SM 779) SANS 5780:2008 (SABS SM 780) SANS 5781:2006 (SABS SM 781) SANS 5788:2008 (SABS SM 788) SANS 5789:2008 (SABS SM 789) SANS 5790:2008 (SABS SM 790) SANS 5791:2008 (SABS SM 791) SANS 5792:2008 (SABS SM 792) SANS 5793:2008 (SABS SM 793) SANS 5794:2008 (SABS SM 794) SANS 5796:2008 (SABS SM 796) SANS 5797:2008 (SABS SM 797) SANS 5806:2006 (SABS SM 806) SANS 5807:1979 (SABS SM 807) SANS 5808:2003 (SABS SM 808) SANS 5809:2008 (SABS SM 809) 3.Surface roughness characteristics of blast-cleaned steel surfaces .) 1.01 Fluorescent whitening agent content of laundry detergents Chemical damage to cotton fibres by laundry detergents Water-insoluble matter content of laundry detergents Diameter of circular crockery 3 3 2 2 Capacity of cups 2 Impact strength of cups. and acid resistance of decoration Foam height of laundry detergents 3 3 1 Pesticides: Test rooms.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5772:2004 (SABS SM 772) Edition Title 2 Preparation of steel substrates before the application of paints and related products .01 2 Page 126 . and test insects and their handling Pesticides: General conditions and equipment for the rearing and handling of test insects Pesticides .Rearing and handling of the tobacco beetle (Lasioderma serricorne Fabr. 2 (SABS ISO 5828) SANS 5829:1984/ISO 5829:1984. IDT.Rearing and handling of the dried-fruit moth (Ephestia cautella Walker) Resistance spot welding electrode caps 1 1 Spot welding equipment .Dimensions and characteristics Resistance spot welding . IDT.) Timber-based board products .01 Soluble deleterious impurities in fine aggregates (limit test) Estimation of the effect of fine aggregate on the water requirement of concrete Effect of fine and coarse aggregate on the shrinkage and expansion of cement: aggregate mixes (mortar prism method) Low density materials content of aggregates 2.Transformers General specifications applicable to all transformers Spot welding . female taper 1:10 Resistance spot welding . Ed. IDT.Rearing and handling of the silver fish (Lepisma saccharina L.01 2. 1 (SABS ISO 5827) SANS 5828:2004/ISO 5828:2001.Rearing and handling of the Pharaoh's ant (Monomorium pharaonis (L.01 Detection of sugar in fine aggregates 2. Ed.Male electrode caps 1 1 2 Presence of chlorides in aggregates 2 Organic impurities in fine aggregates (limit test) 2. Ed. IDT. 1 (SABS ISO 5829) SANS 5830:1984/ISO 5830:1984. Ed.Squareness 2 2 2.)) Pesticides . IDT. Ed. Ed.Electrode adaptors.01 2 Pesticides .02 2. 1 (SABS ISO 5821) SANS 5822:1988/ISO 5822:1988. Ed. 1 (SABS ISO 5830) SANS 5831:2006 (SABS SM 831) SANS 5832:2006 (SABS SM 832) SANS 5833:2006 (SABS SM 833) SANS 5834:2006 (SABS SM 834) SANS 5835:2006 (SABS SM 835) SANS 5836:2007 (SABS SM 836) SANS 5837:2008 (SABS SM 837) Edition Title 2 Pesticides .Secondary connecting cables with terminals connected to water-cooled lugs .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5811:2009 (SABS SM 811) SANS 5812:2008 (SABS SM 812) SANS 5815:2009 (SABS SM 815) SANS 5817:2004 (SABS SM 817) SANS 5819:2009 (SABS SM 819) SANS 5821:1979/ISO 5821:1979. IDT. 2 (SABS ISO 5822) SANS 5823:1978 (SABS SM 823) SANS 5826:2004/ISO 5826:1999.Taper plug gauges and taper ring gauges Pesticides: Biological evaluation of the efficacy of insecticides used on compost Resistance welding equipment .Electrode back-ups and clamps 1 2 1 2 Resistance welding equipment .) Pesticides . 2 (SABS ISO 5826) SANS 5827:1983/ISO 5827:1983. IDT.02 Page 127 .Rearing and handling of the lesser grain borer (Rhizopertha dominica F. 02 2.01 FACT value (10% fines aggregate crushing value) of coarse aggregates Water absorption of aggregates 2.02 Polished-stone value of aggregates 2.02 2.01 Aggregate crushing value of coarse aggregates 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5838:2006 (SABS SM 838) SANS 5839:2008 (SABS SM 839) SANS 5840:2008 (SABS SM 840) SANS 5841:2008 (SABS SM 841) SANS 5842:2006 (SABS SM 842) SANS 5843:2008 (SABS SM 843) SANS 5844:2006 (SABS SM 844) SANS 5845:2006 (SABS SM 845) SANS 5846:2006 (SABS SM 846) SANS 5847:2008 (SABS SM 847) SANS 5848:2008 (SABS SM 848) SANS 5849:2008 (SABS SM 849) SANS 5850-1:1998 (SABS SM 850-1) SANS 5850-2:2008 (SABS SM 850-2) SANS 5851:2002 (SABS SM 851) SANS 5852:2008 (SABS SM 852) SANS 5853:2008 (SABS SM 853) SANS 5854:2006 (SABS SM 854) SANS 5855:2008 (SABS SM 855) SANS 5856:2006 (SABS SM 856) SANS 5858:2007 (SABS SM 858) Edition Title 2 Sand equivalent value of fine aggregates 2.02 Total water-soluble salts content of fines in aggregates Sulfates content of fines in aggregates Part 1: Water-soluble sulfates in fines in aggregates Sulfates content of fines in aggregates Part 2: Acidsoluble sulfates in fines in aggregates Liquid limit of fines in aggregates for base-courses 2 1.01 Bulk densities and voids content of aggregates 2 Abrasion resistance of coarse aggregates (Los Angeles machine method) Flakiness index of coarse aggregates 2.Biological evaluation of mosquito larvicides in artificially created mosquito breeding places Page 128 .02 2.03 1.01 2 Plastic limit and plasticity index of fines in aggregates for base-courses Linear shrinkage of fines in aggregates for basecourses pH Value of fines in aggregates for base-courses 2 2 2 Free water content of aggregates 2 Bulking of fine aggregates 2 Pesticides .01 Particle and relative densities of aggregates 2.02 Soundness of aggregates (magnesium sulfate method) Shell content of fine aggregate 2. Vebe test Concrete tests . tolerances and uses of cast test specimens Concrete tests .Flexural strength of hardened concrete Concrete tests .Consistence of freshly mixed concrete . and testing for compressive strength of cores taken from hardened concrete Preparation of samples of vulcanized rubbers for testing Conditioning of vulcanized rubbers 2.Consistence of freshly mixed concrete .01 2 2 2 2 Accelerated aging of vulcanized rubbers (Air-oven method) Hardness of vulcanized rubbers of hardness 30-95 IRH degrees Compression set of vulcanized rubbers under constant deflection Tear strength of vulcanized rubbers 2 2 2 2 Water absorption of vulcanized rubbers 2 Ozone resistance of vulcanized rubbers (RAPRAHampden method) Electrical resistance of vulcanized rubbers 2 Page 129 .Consistence of freshly mixed concrete .01 2.Consistence of freshly mixed concrete .01 Concrete tests .01 2.Biological efficacy of soil insecticides 1.01 2.Compacting factor and compaction index Concrete tests .01 Concrete tests .Dimensions.01 2. preparation.01 2.The drilling.Mixing fresh concrete in the laboratory Concrete tests .Standards available in electronic format (PDF) October 2009 SANS Number SANS 5859:2003 (SABS SM 859) SANS 5860:2006 (SABS SM 860) SANS 5861-1:2006 (SABS SM 861-1) SANS 5861-2:2006 (SABS SM 861-2) SANS 5861-3:2006 (SABS SM 861-3) SANS 5862-1:2006 (SABS SM 862-1) SANS 5862-2:2006 (SABS SM 862-2) SANS 5862-3:2006 (SABS SM 862-3) SANS 5862-4:2006 (SABS SM 862-4) SANS 5863:2006 (SABS SM 863) SANS 5864:2006 (SABS SM 864) SANS 5865:1994 (SABS SM 865) SANS 5867:2008 (SABS SM 867) SANS 5868:2008 (SABS SM 868) SANS 5869:2008 (SABS SM 869) SANS 5870:2008 (SABS SM 870) SANS 5872:2008 (SABS SM 872) SANS 5873:2008 (SABS SM 873) SANS 5875:2008 (SABS SM 875) SANS 5876:2008 (SABS SM 876) SANS 5880:2008 (SABS SM 880) Edition Title 3 Pesticides .Flow test Concrete tests .Sampling of freshly mixed concrete 2.Making and curing of test specimens Concrete tests .01 2.01 2.Slump test Concrete tests .Compressive strength of hardened concrete Concrete tests . determining their subjects. flexural and compression types (constant rate of traverse) . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5883:2008 (SABS SM 883) SANS 5884:1977 (SABS SM 884) SANS 5885:1977 (SABS SM 885) SANS 5886:1979 (SABS SM 886) SANS 5889:2007 (SABS SM 889) SANS 5891:2003 (SABS SM 891) SANS 5893:2003/ISO 5893:2002. IDT.Tensile. IDT. IDT. Ed.Flammability of aerosols (flame projection test) Rubber and plastics test equipment .Micrographic method for assessing the distribution of carbides using reference photomicrographs Acid gas evolved during combustion of cable materials Pesticides: Organoleptic evaluation of the taste of pesticide-treated grain Determination of wet split tear strength of inner sole and runner materials (other than leather) Documentation .Potentiometric titration method Tool steels and bearing steels .Specification Pyrometric cone equivalent (refractoriness) of refractory bricks and materials Creep of refractory bricks in compression 2 1 SANS 5908:1979 (SABS SM 908) SANS 5910:1979 (SABS SM 910) SANS 5924:2009 (SABS SM 924) SANS 5925:2007 (SABS SM 925) SANS 5941:2009 (SABS SM 941) SANS 5943:2005/ISO 5943:2004.Biological evaluation of materials containing insecticide(s) having a fumigant action Pesticides .Guidelines for the establishment and development of multilingual thesauri Non-fibrous material content of textiles (alkali hydrolysis method) SANS 5949:2005/ISO 5949:1983. 1 1 SANS 5965:2006 (SABS SM 965) 2 Page 130 . 3 Edition Title 2 Resistance of vulcanized rubbers to swelling (volumetric method) Scuff damage by impact on leather 1 1 Assessment of scuff damage to leather (viewing box method) Degree of haemolysis in buffered systems 1 2 Pesticides . Ed. IDT. 1 1 SANS 5956:2007 (SABS SM 956) SANS 5957:1978 (SABS SM 957) SANS 5962:1982 (SABS SM 962) SANS 5963:2006/ISO 5963:1985. 1 3 1 1 1 SANS 5964:2005/ISO 5964:1985. 3 1 1 2 Moisture content of coal samples intended for general analysis (vacuum-oven method) Moisture content of coal samples intended for general analysis (air-oven method) Carbon dioxide content of coal (titrimetric method) 2 2 1 Cheese and processed cheese products Determination of chloride content . and selecting indexing terms Documentation . Ed.Methods for examining documents. Ed. Ed. 01 Moisture content of timber (electric moisture-meter method) Depth of penetration of preservative and detection and depth of sapwood in timber Retention of preservative in timber (sample method) 2.01 Average adhesive bond quality of plywood and composite boards (knife test) Heat-cool stability of wax polishes 2 2 Penetration of wax (paste) polishes 2 Performance of wax polishes 2 Softening point of the non-volatile matter of wax polishes Wax polishes .01 Copper detection in timber Page 131 .01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 5966:2007 (SABS SM 966) SANS 5967:2008 (SABS SM 967) SANS 5969:2004 (SABS SM 969) SANS 5970:2004 (SABS SM 970) SANS 5973:2009 (SABS SM 973) SANS 5976:2005 (SABS SM 976) SANS 5977:2008 (SABS SM 977) SANS 5978:2008 (SABS SM 978) SANS 5980:2007 (SABS SM 980) SANS 5981:2008 (SABS SM 981) SANS 5982:2006 (SABS SM 982) SANS 5983:2008 (SABS SM 983) SANS 5984:2004 (SABS SM 984) SANS 5985:2004 (SABS SM 985) SANS 5986:2004 (SABS SM 986) SANS 5987:2007 (SABS SM 987) SANS 5988:2004 (SABS SM 988) SANS 5989:2004 (SABS SM 989) SANS 5990:2004 (SABS SM 990) SANS 5991:2004 (SABS SM 991) SANS 5992:2004 (SABS SM 992) Edition Title 3.01 1.01 1.01 Flatness of wooden board products 1.01 Retention of preservative in timber (weighbridge method) Water repellency (short-term) of preservative-treated timber Guidelines for the spray-testing of timber specimens 1.01 Removable non-fibrous material content of textiles (scouring method) Retention of preservative in timber (volume method) 2.01 Edge straightness of wooden board products 1.01 1.01 1.Non-volatile matter content and the ash content of non-volatile matter Water content of solvent-based wax polishes 3 2 3 Preparation of test specimens for moisture content determination in timber and timber products Moisture content of timber and timber products (oven dry method) Moisture content of timber (extraction method) 2.01 1.01 1. Standards available in electronic format (PDF) October 2009 SANS Number SANS 5993:2004 (SABS SM 993) SANS 5994:2004 (SABS SM 994) SANS 5996:2004 (SABS SM 996) SANS 5997:2004 (SABS SM 997) SANS 5999:2004 (SABS SM 999) SANS 6000:2004 (SABS SM 1000) SANS 6001:2004 (SABS SM 1001) SANS 6002:2004 (SABS SM 1002) SANS 6004:2005 (SABS SM 1004) SANS 6005:2005 (SABS SM 1005) SANS 6007:2006 (SABS SM 1007) SANS 6008:2005 (SABS SM 1008) SANS 6009:2005 (SABS SM 1009) SANS 6011:2009 (SABS SM 1011) SANS 6012:2004 (SABS SM 1012) SANS 6013:2004 (SABS SM 1013) SANS 6015:2004 (SABS SM 1015) SANS 6016:2005 (SABS SM 1016) SANS 6018:2005 (SABS SM 1018) SANS 6019:2004 (SABS SM 1019) SANS 6025:1984 (SABS SM 1025) Edition Title 1.01 1.01 Zinc detection in timber 1.01 Heartwood detection in timber of the Pinus species 1.01 Arsenic detection in timber 1.01 Heartwood detection in timber of the Eucalyptus species Colour fastness of textile curtaining to water-wicking 2 2 Colour fastness of textile floor coverings to shampooing Mass of total pile yarn per unit area of tufted textile floor coverings Mass per unit area of effective pile above the substrate of textile floor coverings Balance of twist of textile threads 2 2 2 3 Assessment of the tendency of apparel fabrics to snag (mace tester method) Abrasion resistance of textile fabrics (Martindale test) Cutting and marking of test specimens of particle boards Thickness swelling and water absorption of fibreboards on immersion in water Dimensional and mass stability of particle boards with varying humidity Modulus of elasticity and modulus of rupture in static bending of fibreboards Transverse tensile (internal bond) strength of woodbased panels Screw-holding strength of wood-based panels 3 1.01 1.01 Tin detection in timber 1.01 Chromium detection in timber 1.01 Surface bond strength of particle boards 1 Vinyl chloride monomer content of polyvinyl chloride plastics for medical use Page 132 .01 1.02 1.01 1.01 1. 01 pH Value of wood adhesives 1. Ed.Block shear test Resistance to delamination of wood adhesive bonds 1.01 2 2 2 1.01 Standard laminated wood unit for testing wood adhesives Accelerated degradation of adhesive bonds in wood 1.01 2. NEQ.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6026:2005 (SABS SM 1026) SANS 6027:2007 (SABS SM 1027) SANS 6028:2007 (SABS SM 1028) SANS 6029:2005 (SABS SM 1029) SANS 6030:2005 (SABS SM 1030) SANS 6031:2005 (SABS SM 1031) SANS 6032:2005 (SABS SM 1032) SANS 6033:2006 (SABS SM 1033) SANS 6034:2005 (SABS SM 1034) SANS 6035:2005 (SABS SM 1035) SANS 6036:2005 (SABS SM 1036) SANS 6037:2005 (SABS SM 1037) SANS 6038:2005 (SABS SM 1038) SANS 6039:2005 (SABS SM 1039) SANS 6040:2005 (SABS SM 1040) SANS 6041:2008/ISO 2115:1996.01 2 Wood failure percentage in an adhesive joint 1.01 Total solids content (non-volatile matter) of wood adhesives Insoluble matter content of wood adhesives 1.01 Gap-joint test pieces for testing wood adhesives 1. wood adhesive dispersions Resistance of aqueous wood adhesive dispersions to freezing and thawing Breaking strength in tension of wood adhesive bonds in close-joint and gap-joint test pieces Shear strength in compression of wood adhesive bonds .01 Apparent dynamic viscosity of wood adhesives 1.01 Ash content of wood adhesives 1.01 Detection of thermoplasticity in wood adhesives: Creep test Page 133 .01 1. 3 (SABS SM 1041) SANS 6042:2005 (SABS SM 1042) SANS 6043:2005 (SABS SM 1043) SANS 6044:2006 (SABS SM 1044) SANS 6045:2007 (SABS SM 1045) SANS 6046:2005 (SABS SM 1046) Edition Title 2 Dry-cleaning pretreatment of textile fabrics 2 Calibration of the BCIRA X-type viscometer 2 Fluidity of cotton and certain cellulosic man-made fibres in cuprammonium solution (basic method) Close-joint test pieces for testing wood adhesives 2 1.01 White point temperature (MFFT) of aqueous.01 Amylaceous and proteinaceous matter detection in wood adhesives Pot life of reactive liquid wood adhesives 1. outer sole and heel materials) Ether-soluble matter content (PVC upper.Chromium content 2 Water .Sodium content 2 Water .01 Water .Dissolved oxygen content 2.Oil and grease content 2 Water . and coke residue from coal by low temperature distillation Total ash content (PVC upper.Mercury content 2 Analysis of plumage fillings (hand-sorting method) 3.01 Water .Suspended solids content 2.Orthophosphate content 2 Water . water.Chemical oxygen demand 2.Sulfide content 2 Water .Standards available in electronic format (PDF) October 2009 SANS Number SANS 6047:2007 (SABS SM 1047) SANS 6048:2005 (SABS SM 1048) SANS 6049:2004 (SABS SM 1049) SANS 6050:2004 (SABS SM 1050) SANS 6051:2007 (SABS SM 1051) SANS 6053:2007 (SABS SM 1053) SANS 6054:2004 (SABS SM 1054) SANS 6055:2006 (SABS SM 1055) SANS 6056:2007 (SABS SM 1056) SANS 6059:2005 (SABS SM 1059) SANS 6060:2005 (SABS SM 1060) SANS 6061:2007 (SABS SM 1061) Edition Title 2 Water .01 CCA salts equivalent mass concentration of aqueous solutions that contain mixtures of copperchromium-arsenic compounds used for timber preservation Coking properties of coal (Ruhr dilatometer test) SANS 6072:2009 (SABS SM 1072) SANS 6073:1984 (SABS SM 1073) SANS 6075:1983 (SABS SM 1075) SANS 6076:1983 (SABS SM 1076) SANS 6077:2006 (SABS SM 1077) SANS 6080:1994 (SABS SM 1080) SANS 6081:2008 (SABS SM 1081) SANS 6082:2008 (SABS SM 1082) 2 1 Yields of tar. outer sole and heel materials) Fire test for valves and other assemblies used in fire-hazardous situations Leather and other footwear materials .Resistance to to-and-fro rubbing Cleaning efficiency of low-foam laundry detergents 1 1 2 2 3 3 Cleaning efficiency of high-foam laundry detergents Page 134 .Boron content 2.01 Water . gas.01 Water . Initial drying shrinkage and wetting expansion of concrete Stock remedies .Stripping rate of cattle tickicides in spray races Stock remedies .Standards available in electronic format (PDF) October 2009 SANS Number SANS 6083:2004 (SABS SM 1083) SANS 6084:2004 (SABS SM 1084) SANS 6085:2006 (SABS SM 1085) SANS 6094:2009 (SABS SM 1094) SANS 6095:2009 (SABS SM 1095) SANS 6096:2009 (SABS SM 1096) SANS 6097:2009 (SABS SM 1097) SANS 6098:2009 (SABS SM 1098) SANS 6100:2007 (SABS SM 1100) SANS 6101:2007 (SABS SM 1101) SANS 6103:2007 (SABS SM 1103) SANS 6104:2007 (SABS SM 1104) SANS 6105:2007 (SABS SM 1105) SANS 6106:2005 (SABS SM 1106) SANS 6107:2005 (SABS SM 1107) SANS 6109:1988 (SABS SM 1109) SANS 6110:1988 (SABS SM 1110) SANS 6111:1988 (SABS SM 1111) SANS 6112:1988 (SABS SM 1112) SANS 6113:1988 (SABS SM 1113) Edition Title 1.Performance of supporting cores under mechanical and thermal stresses Adherence of dielectric to conductor of supporting cores of aerial bundled conductors Linear density of yarns in weft-knitted fabrics 2 2.Stability of cattle tickicides in plunge-dipping tanks Aerial bundled conductors .Efficacy of chemicals against adult ticks Stock remedies .Efficacy confirmation of tickicides on cattle Stock remedies .02 2 2 2 2 2 3 2 2 2 Stitch length of weft-knitted fabrics 2 Surface burning properties of textile fabric with a raised fibre surface Wales and courses per unit length in knitted textile fabrics (graduated rule method) Wales and courses per unit length in knitted textile fabrics (Traversing thread counter method) Volume of gas in a cartridge 2 2 1 1 Accumulated impact strength of ladies' shoe heels of height greater than 25 mm Accumulated impact strength of steel shanks 1 1 Bending modulus of steel shanks for footwear 1 Resilience of steel shanks for footwear Page 135 .01 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes Colour fastness of textiles to light: Mercury vapour lamp method Concrete tests .Efficacy of chemicals against tick larvae Stock remedies . Most probable number (MPN) technique Fatigue bending of granulated cork bottom filler for footwear 1 Page 136 .01 Resistance of wooden doors to soft body impact 1.01 Wooden doors .Determination of resistance to weathering Dimensional changes and skewness of textile fabrics on exposure to heat Pull-off strength of ladies' shoe heels 2 1 1 Wet stitch tear strength of leather welting 2 Enumeration of sulfate-reducing bacteria .Standards available in electronic format (PDF) October 2009 SANS Number SANS 6114:2007 (SABS SM 1114) SANS 6115:2007 (SABS SM 1115) SANS 6116:2005 (SABS SM 1116) SANS 6117:1988 (SABS SM 1117) SANS 6118:1988 (SABS SM 1118) SANS 6119:1988 (SABS SM 1119) SANS 6120:2005 (SABS SM 1120) SANS 6121:2004 (SABS SM 1121) SANS 6122:2008 (SABS SM 1122) Edition Title 2 Resistance to actinic degradation of woven curtain and drape fabrics Resistance to actinic degradation of knitted curtain and drape fabrics Resistance of textile fabrics to pilling and fuzzing (Random tumble method) Moisture stability of insole boards and shank boards for footwear Spigot holding strength of ladies' plastics moulded heel top-pieces The water-soluble chloride content of material for thermal insulation Wales and courses per unit length in knitted textile fabrics (fixed aperture method) Bond quality of laminated timber products (Glulam) Chisel test Qualification testing of solid structural timber and laminated structural timber (glulam) for verifying timber grading systems in accordance to a given standard Wooden doors .01 1.Determination of stiffness 2 2 1 1 1 2 1.Determination of resistance to torsion Resistance of wooden doors to hard body impact 1.01 SANS 6123:2004 (SABS SM 1123) SANS 6124:2004 (SABS SM 1124) SANS 6125:2004 (SABS SM 1125) SANS 6126:2004 (SABS SM 1126) SANS 6128:2004 (SABS SM 1128) SANS 6129:2004 (SABS SM 1129) SANS 6130:2006 (SABS SM 1130) SANS 6131:1988 (SABS SM 1131) SANS 6132:1989 (SABS SM 1132) SANS 6133:2007 (SABS SM 1133) SANS 6134:1989 (SABS SM 1134) 2.01 2.01 Resistance of wooden doors to slamming 2.01 2.Class 2 .02 Wooden doors . used with cement. IDT. Ed. MOD (SABS SM 1138) SANS 6141:2007 (SABS SM 1141) SANS 6142:2006 (SABS SM 1142) SANS 6146:2006 (SABS SM 1146) SANS 6147:2006 (SABS SM 1147) SANS 6148:2006 (SABS SM 1148) SANS 6149:2006 (SABS SM 1149) SANS 6150:2006 (SABS SM 1150) SANS 6151:2005 (SABS SM 1151) SANS 6152:1989 (SABS SM 1152) SANS 6154:2006 (SABS SM 1154) SANS 6155:2006 (SABS SM 1155) SANS 6156:2006 (SABS SM 1156) SANS 6157:2007 (SABS SM 1157) SANS 6158:2007/ISO 6158:2004. on the reduction of expansion caused by alkali-silica reaction (accelerated mortar prism method) Water requirement of portland cement extenders 2 2 2 2 Fineness of cement extenders (45 µm sieve method) Metallic coatings .Standards available in electronic format (PDF) October 2009 SANS Number SANS 6135:1989 (SABS SM 1135) SANS 6136:2003 (SABS SM 1136) SANS 6138:2007/IEC 60332-1:1979.01 2 Non-recoverable extension of textile floor coverings as imposed by mechanical action Water-vapour transfer through a textile fabric 2 Page 137 .Single vertical insulated cable or cord Permitted explosives: Gallery test 2 2 2 2 Permitted explosives: Continuity of detonation 2 Permitted explosives: Water resistance 2 Permitted explosives: Gap sensitivity 2 Permitted explosives: Low temperature sensitivity 2 Permitted explosives: Density 2 Verification of compression testing machines for concrete: Calibration of load scale Free water content of Portland cement extenders 2 1 Available alkali content of portland cement extenders Glass content of granulated metallurgical slag (transmitted-light microscopy method) Effect of extenders.Electrodeposited coatings of chromium for engineering purposes Electrical resistance of floors 2 1. 2 (SABS ISO 6158) SANS 6160:2005 (SABS SM 1160) SANS 6161:2005 (SABS SM 1161) SANS 6163:2006 (SABS SM 1163) Edition Title 1 Heat insulation of granulated cork bottom filler for footwear Pesticides .Biological evaluation of materials that release an insecticide upon heating Resistance of cables and cords to flame propagation . moderate static loading Corrugated fibre board .Cobalt content 1.Determination of resistance to staining Coated fibreboard .Class 1 .Determination of resistance to steam Wooden doors .01 2.Aluminium content 1.01 Fibreboard .01 1.01 Slippage resistance of yarns at standard seams in fabrics Page 138 .Determination of lateral nail-holding strength Coated fibreboard .01 1.Determination of density 1.01 3 Textile floor coverings .01 Fibreboard .Sieving of tablets and pellets 1.01 Water .01 Water .01 1.Preparation of test specimens 1.01 Fibreboard .Nickel content 1.01 Water .Determination of linear expansion as a result of water absorption Insulation board .Assessment of fire rating 1.Determination of bitumen content 1.01 1.01 1.Pretreatment for metal analysis 1.Loss of thickness after brief.Determination of ply adhesion Corrugated fibre board .Measurement of dimensions of test specimens Fibreboard .01 1.Determination of thickness 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6164:2009 (SABS SM 1164) SANS 6168:2004 (SABS SM 1168) SANS 6169:2005 (SABS SM 1169) SANS 6170:2005 (SABS SM 1170) SANS 6171:2004 (SABS SM 1171) SANS 6172:2003 (SABS SM 1172) SANS 6173:2004 (SABS SM 1173) SANS 6174:2004 (SABS SM 1174) SANS 6175:2004 (SABS SM 1175) SANS 6176:2004 (SABS SM 1176) SANS 6177:2004 (SABS SM 1177) SANS 6178:2004 (SABS SM 1178) SANS 6179:2004 (SABS SM 1179) SANS 6180:2004 (SABS SM 1180) SANS 6181:2004 (SABS SM 1181) SANS 6182:2004 (SABS SM 1182) SANS 6183:2006 (SABS SM 1183) SANS 6188:2005 (SABS SM 1188) SANS 6192:2006 (SABS SM 1192) SANS 6193:2006 (SABS SM 1193) SANS 6194:2007 (SABS SM 1194) Edition Title 1.01 Fibreboard .02 Fire extinguishers .01 1.Determination of resistance to weathering Pesticides .01 Determination of lead (inorganic and tetra-alkyl) in workplace air by atomic absorption spectrophotometry Water .Determination of resistance of coating to scraping Coated fibreboard .01 1. Compression resistance 1 Footwear .Water vapour coefficient 1 Footwear materials .Corrosion resistance (metallic components) Page 139 .02 1 Footwear .Electrical resistance properties 1 Safety footwear .Standards available in electronic format (PDF) October 2009 SANS Number SANS 6195:2006 (SABS SM 1195) SANS 6196:2006 (SABS SM 1196) SANS 6204:2007 (SABS SM 1204) SANS 6205:2007 (SABS SM 1205) SANS 6206:2007 (SABS SM 1206) SANS 6207:2007 (SABS SM 1207) SANS 6208:2007 (SABS SM 1208) SANS 6210:2009 (SABS SM 1210) SANS 6211-1:2003 Edition Title 1.01 Examination for the presence of viable Shigella organisms in foods Examination for the presence of viable pathogenic Vibrio organisms in foods Heat resistance of cables and flexible cords 1.Outsole bond strength 1 Footwear materials .Penetration resistance 1 Footwear .01 2 2 Extensibility test for extensible leads 2 Wear resistance of braided and unkinkable cords 2 Bending test for highly flexible cords such as tinsel cords Extension test for extensible leads 2 2 Domestic solar water heaters .Water vapour absorption 1 Footwear .Mechanical qualification tests Domestic solar water heaters Part 1: Thermal performance using an outdoor test method Domestic solar water heaters Part 2: Thermal performance using an indoor test method Abrasion resistance of footwear materials (Martindale) Adhesion in peel of sealant 1 SANS 6211-2:2003 1 SANS 6215:1993 (SABS SM 1215) SANS 6216:1993 (SABS SM 1216) SANS 6219:2007 (SABS SM 1219) SANS 6223:2008 (SABS SM 1223) SANS 6224:1994 (SABS SM 1224) SANS 6225:1994 (SABS SM 1225) SANS 6226:1994 (SABS SM 1226) SANS 6227:1994 (SABS SM 1227) SANS 6228:1994 (SABS SM 1228) SANS 6229:1994 (SABS SM 1229) SANS 6230:1994 (SABS SM 1230) 1 1 2 Permitted electric detonators: Incendivity (Gallery test) The Izod impact test for metallic materials 1. Standards available in electronic format (PDF) October 2009 SANS Number SANS 6231:1994 (SABS SM 1231) SANS 6232:1994 (SABS SM 1232) SANS 6234:2006 (SABS SM 1234) SANS 6235:1994 (SABS SM 1235) SANS 6236:1994 (SABS SM 1236) SANS 6237:1994 (SABS SM 1237) SANS 6238:2007 (SABS SM 1238) SANS 6239:2006 (SABS SM 1239) SANS 6240:2008 (SABS SM 1240) SANS 6241:2006 (SABS SM 1241) SANS 6242:2008 (SABS SM 1242) SANS 6243:2008 (SABS SM 1243) SANS 6244:2006 (SABS SM 1244) SANS 6245:2006 (SABS SM 1245) SANS 6246:2006 (SABS SM 1246) SANS 6248:2007 (SABS SM 1248) SANS 6250:2006 (SABS SM 1250) SANS 6251:2006 (SABS SM 1251) SANS 6252:2006 (SABS SM 1252) SANS 6253:2006 (SABS SM 1253) Edition Title 1 Footwear materials .Elastomeric material .Absorption and desorption of water Safety footwear .01 Particle size distribution of material of diameter smaller than 75 µm in fine aggregate (hydrometer method) Acid insolubility of aggregates 1.02 2 Paints and varnishes .Density of hardened concrete 1.Determination of traffic wear index Concrete tests .Density of compacted freshly mixed concrete Concrete tests .Tensile splitting strength of concrete 1.01 1.01 1.Hot contact resistance 1 1.02 Electric conductivity of fine aggregate 1.01 Page 140 .01 1 1 1 Footwear . respectively.Soling material .Inserts .01 Retention of boron in timber (analytical method) 2 Aggregate impact value of coarse aggregate 1.Penetration-resistant inserts Flexing resistance Pesticides .Penetration resistance 1.Spontaneous ignition properties of solid fumigants Footwear .01 1.02 1. in fine aggregate (pipette method) Potential reactivity of aggregates with alkalis (accelerated mortar prism method) Treton impact value of aggregates 1.Pressure method Concrete tests .02 1.Resistance to fuel oil Footwear .Air content of freshly mixed concrete .02 Deleterious clay content of the fines in aggregate (methylene blue adsorption indicator test) Particles of diameter not exceeding 20 µm and not exceeding 5 µm and smaller.01 Concrete tests . 01 1.01 1 SANS 6278:2007 (SABS SM 1278) SANS 6279:2003 (SABS SM 1279) SANS 6280:2003 (SABS SM 1280) SANS 6281-1:2007 (SABS SM 1281-1) SANS 6281-2:2007 (SABS SM 1281-2) SANS 6281-3:2007 (SABS SM 1281-3) 2.Determination of residue on sieve Paints and varnishes .Application by dipping 1. washability and cleanability of coatings Paints and varnishes .01 2 2 2 Test methods for impregnated paper-insulated electric cables Part 1: Tests on insulating and semiconducting paper Test methods for impregnated paper-insulated electric cables Part 2: Tests on metallic sheaths Test methods for impregnated paper-insulated electric cables Part 3: Tests on finished cable 2 2 Page 141 .Initial drying shrinkage and wetting expansion of mortar Mortar tests .01 1.01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6254:2006 (SABS SM 1254) SANS 6255:2006 (SABS SM 1255) SANS 6257:2007 (SABS SM 1257) SANS 6258:2003 (SABS SM 1258) SANS 6259:2003 (SABS SM 1259) SANS 6260:2007 (SABS SM 1260) SANS 6261:2008 (SABS SM 1261) SANS 6262:1995/ISO 8243:1991.Determination of wet-scrub resistance.Test methods for welded joints Paints and varnishes .01 Microbiological examination of canned meat and fish products Paints and varnishes .Compressive strength of mortar 1. Ed.01 Mortar tests . 1 Edition Title 1.Calcium and magnesium content . NEQ (SABS SM 1262) SANS 6265:2006 (SABS SM 1265) SANS 6266:2009 (SABS SM 1266) SANS 6267:2007 (SABS SM 1267) SANS 6268:2007 (SABS SM 1268) SANS 6269:2005 (SABS SM 1269) SANS 6270-1:2004/ISO 6270-1:1998.Determination of brush and roller application properties Paints and varnishes .Determination of skid resistance Paints and varnishes .Atomic absorption spectrometric method Virucidal efficacy of disinfectants and detergentdisinfectants using bacteriophages as indicator organisms Enumeration of lipolytic and oxidative organisms in foodstuffs Microbiological examination of foodstuffs in retort pouches Welding of thermoplastics .02 Water .Sampling 2 2 2 3 1 1.01 2.Determination of coefficient of retro-reflected luminance by means of a portable retro-reflectometer Cigarettes . IDT.Determination of resistance to humidity Part 1: Continuous condensation Boric acid equivalent mass concentration of aqueous solutions that contain borate timber preservatives Paints and varnishes . 1 (SABS SM 1283) SANS 6284-1:2007 (SABS SM 1284-1) SANS 6284-2:2007 (SABS SM 1284-2) SANS 6284-3:2007 (SABS SM 1284-3) SANS 6284-4:2007 (SABS SM 1284-4) SANS 6284-5:2007 (SABS SM 1284-5) SANS 6286:2007 (SABS SM 1286) SANS 6289:2007 (SABS SM 1289) SANS 6291:2008 (SABS SM 1291) SANS 6292:2006 (SABS SM 1292) SANS 6293:2006 (SABS SM 1293) SANS 6294:2006 (SABS SM 1294) SANS 6295:2006 (SABS SM 1295) SANS 6296:2006 (SABS SM 1296) SANS 6297:2006 (SABS SM 1297) Edition Title 2 Test methods for impregnated paper-insulated electric cables Part 4: Tests after installation Test methods for bare conductors and conductors of insulated electric cables Part 1: Conductor resistance 2 2 Test methods for bare conductors and conductors of insulated electric cables Part 2: Quality of metallic coatings Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests Test methods for armouring of insulated electric cables 2 2 2 Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 1: Tests on XLPE insulation Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 2: Tests on extruded semi-conducting screens Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 3: Tests on finished cable Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 4: Tests after installation Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 5: Ageing tests Test methods for sheathing of insulated electric cables Impulse voltage tests on cable and accessories of rated voltage up to and including 132 kV Partial discharge measurements on power cables 2 2 2 2 2 2 2 1. 1.01 1. Ed. IEC 60245-2:1994. NEQ. TELKOM 268AD:9999.Free water content of slaked lime Page 142 .Available lime content 1. IEC 60227-2:1997. NEQ (SABS SM 1282-1) SANS 6282-2:2007 (SABS SM 1282-2) SANS 6282-3:2007 (SABS SM 1282-3) SANS 6283:2007/IEC 60055-1:1997.Sample preparation and reagents Lime tests .01 Lime tests . 2.Carbon dioxide content 1. NEQ.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6281-4:2007 (SABS SM 1281-4) SANS 6282-1:2007/IEC 60055-1:1997.Magnesium oxide content 1.Chemical analysis . NEQ. NEQ. NEQ.01 Lime tests . IEC 60189-1:1986.01 Lime tests . NEQ. IEC 60502:1994.01 Lime tests . IEC 60502-2:1998. 5. NEQ. Ed.01 Lime tests . NEQ. Ed. Ed. IEC 60502-1:1998.Calcium oxide content 1. 1. 02 1.01 1.01 Depth of penetration of borate preservatives in timber Lime tests . IDT.01 Lime tests .01 Lime tests .Assessment of static electrical propensity .Pat soundness 1.01 Lime tests .Sulfur trioxide content 1.Autoclave expansion 1.Sample preparation Lime tests . IDT.Shear test procedure for disc brake pad and drum brake shoe assemblies Water quality .01 1 SANS 6318:2003 1 SANS 6319:2003 1 SANS 6320:2003 1 SANS 6321:2009 1 SANS 6340:2004/ISO 6340:1995.Isothermal slaking and preparation of quicklime Lime tests . 2 Edition Title 1.Determination of cleaning efficiency .General expansion 1.Fineness 1.Walking test Page 143 .Method of test for apparel fabrics Determination of the microbial inhibition of cosmetic soap bars and liquid hand and body washes Water quality . IDT.Plasticity 1.Detection of Salmonella species SANS 6315:2003 1 SANS 6316:2007 (SABS SM 1316) SANS 6317:2003 1.Brake linings .Loss on ignition 1.Determination of the effect on painted surfaces Textiles . Ed. 1 1 SANS 6356:2004/ISO 6356:2000.Solar UV protective properties . Ed.01 Sulfate content of water (turbidimetric method) 1 Road vehicles .Flat rectangular test plates Detergents and cleaning agents .Corrosiveness to steel and aluminium Methods of chemical analysis of meat and fish products Detergents and cleaning agents .Physical properties . 1 1 Textile floor coverings .01 Lime tests .01 Lime tests . Ed.01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6298:2006 (SABS SM 1298) SANS 6299:2006 (SABS SM 1299) SANS 6300:2006 (SABS SM 1300) SANS 6301:2006 (SABS SM 1301) SANS 6302:2006 (SABS SM 1302) SANS 6303:2004 (SABS SM 1303) SANS 6305:2006 (SABS SM 1305) SANS 6306:2003 (SABS SM 1306) SANS 6307:2006 (SABS SM 1307) SANS 6308:2006 (SABS SM 1308) SANS 6310:2005 (SABS SM 1310) SANS 6312:2009/ISO 6312:2001.Detection and enumeration of Vibrio cholerae Detergents and cleaning agents .01 Lime tests . Ed.K.H.T) Metallic materials . 1 3 3 3 1 SANS 6508-1:2003/ISO 6508-1:1999.Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) Part 2: Method by membrane filtration Rubber. Ed.Bridge bearings .Vickers hardness test Part 1: Test method Metallic materials .F.N. IDT.Vickers hardness test Part 3: Calibration of reference blocks Metallic materials . IDT. Ed.Enumeration of Escherichia coli .Colony-count technique at 44 °C using membranes Gas cylinders . 2 (SABS ISO 6504-3) SANS 6506-1:2003/ISO 6506-1:1999. IDT. Ed. 2 (SABS ISO 6406) SANS 6439:2006/ISO 6439:1990. 1 1 SANS 6461-2:2003/ISO 6461-2:1986. Ed. Ed. 1 1 SANS 6508-3:2003/ISO 6508-3:1999.C.Brinell hardness test Part 1: Test method Metalic materials .Brinell hardness test Part 4: Table of hardness values Metallic materials .F.4Aminoantipyrine spectrometric methods after distillation Rubber products .B. 2 (SABS ISO 6391) SANS 6406:2006/ISO 6406:2005.B. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6391:1997/ISO 6391:1997.Vickers hardness test Part 2: Verification and calibration of testing machines Metallic materials .G. IDT.N. Ed.Determination of dezincification resistance of brass 2 1 SANS 6446:2005/ISO 6446:1994. IDT. Ed. Ed. 1 (SABS ISO 6509) 1 Page 144 . Ed.Brinell hardness test Part 3: Calibration of reference blocks Metallic materials . Ed. IDT. Ed. Ed.Determination of crystallization effects under compression Paints and varnishes . Ed. 3 (SABS ISO 6507-1) SANS 6507-2:2006/ISO 6507-2:2005.D.Brinell hardness test Part 2: Verification and calibration of testing machines Metallic materials .Rockwell hardness test Part 3: Calibration of reference blocks (scales A. IDT. 1 2 1 SANS 6506-2:2003/ISO 6506-2:1999.E.Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) Part 1: Method by enrichment in a liquid medium Water quality . IDT. 1 1 SANS 6507-1:2006/ISO 6507-1:2005. 1 1 SANS 6508-2:2003/ISO 6508-2:1999. 1 1 SANS 6461-1:2003/ISO 6461-1:1986.G.H.K.C. IDT. Ed.K.Rockwell hardness test Part 2: Verification and calibration of testing machines (scales A. IDT. IDT.T) Corrosion of metals and alloys . Ed.E. 1 1 SANS 6471:2003/ISO 6471:1994.H. IDT.C.Specification for rubber materials Water quality .Determination of hiding power Part 3: Determination of contrast ratio of lightcoloured paints at a fixed spreading rate Metallic materials . IDT. 1 1 SANS 6509:1981/ISO 6509:1981. Ed.Seamless steel gas cylinders Periodic inspection and testing Water quality . vulcanized .F. Ed. IDT.B.E. IDT. 1 1 SANS 6506-3:2003/ISO 6506-3:1999. Ed. IDT.D. IDT. 2 1 SANS 6504-3:2007/ISO 6504-3:2006.Rockwell hardness test Part 1: Test method (scales A. 3 (SABS ISO 6507-2) SANS 6507-3:2006/ISO 6507-3:2005. IDT.Vickers hardness test Part 4: Tables of hardness values Metallic materials . Ed.N.D.T) Metallic materials . 3 (SABS ISO 6507-3) SANS 6507-4:2008/ISO 6507-4:2005. 1 1 SANS 6506-4:2008/ISO 6506-4:2005. 2 Edition Title 1 Meat and meat products .Determination of phenol index .G. Determination of phosphorus Ammonium molybdate spectrometric method Page 145 . IDT. Ed. 2 2 1 SANS 6878:2006/ISO 6878:2004. 1 1 SANS 6579:2003/ISO 6579:2002. Ed. Ed. IDT. IDT. Ed. Ed. Ed. 4 (SABS ISO 6579) SANS 6581:1980/ISO 6581:1980. Ed. Ed. 1 1 SANS 6703-2:2005/ISO 6703-2:1984.Determination of total solids content (Reference method) Water quality . definitions and classification Arc welding and cutting .Mobile and self-propelled machinery . IDT. IDT. IDT. 1 1 SANS 6526:2005/ISO 6526:1983. Ed.Spigot series SANS 6520-2:2004/ISO 6520-2:2001. Ed.Nonconsumable tungsten electrodes .Features and tolerances Microbiology of food and animal feeding stuffs Horizontal method for the detection of Salmonella spp. 1 Edition Title 1 Welding and allied processes .Performance requirements and tests Thermoplastic polymers for plain bearings Classification and designation Water quality . 1 (SABS ISO 6777) SANS 6814:2003/ISO 6814:2000. IDT. Anodizing of aluminium and its alloys Determination of the fastness to ultra-violet light of coloured anodic oxide coatings Information Technology .Pressed bimetallic half thrust washers . 1 1 SANS 6524:2005/ISO 6524:1992.Terms. IDT.Classification Dental gypsum products SANS 6691:2005/ISO 6691:2000. Ed. Ed. IDT. 2 2 Earth-moving machinery . Ed. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6520-1:2005/ISO 6520-1:1998.Classification of geometric imperfections in metallic materials Part 2: Welding with pressure Plain bearings . 2 1 1 SANS 6848:2007/ISO 6848:2004. 2 1 SANS 6683:2008/ISO 6683:2005. IDT. IDT. IDT. 1 1 SANS 6777:1984/ISO 6777:1984.Determination of cyanide Part 1: Determination of total cyanide Water quality .Determination of cyanide Part 2: Determination of easily liberatable cyanide Milk. Ed. 2 1 SANS 6525:2005/ISO 6525:1983. Ed. 1 (SABS ISO 6581) SANS 6592:2003/ISO/IEC 6592:2000. 2 (SABS ISO 6878) 2 Water quality .Determination of nitrite . IDT. IDT. cream and evaporated milk . 1 1 SANS 6731:2005/ISO 6731:1989. 2 1 SANS 6703-1:2005/ISO 6703-1:1984.Thin-walled half-bearings Checking of peripheral length Plain bearings . 1 2 1 1 SANS 6594:2008/ISO 6594:2006. 2 (SABS ISO 6848) SANS 6873:2008/ISO 6873:1998. IDT. IDT. Ed. IDT.Dimensions and tolerances Plain bearings .Ring type thrust washers made from strip . Ed.Guidelines for the documentation of computer-based application systems Cast iron drainage pipes and fittings . IDT.Seat belts and seat belt anchorages .Classification of geometric imperfections in metallic materials Part 1: Fusion welding Welding and allied processes . IDT.Molecular absorption spectrometric method Machinery for forestry . initial suspension and decimal dilutions for microbiological examination Part 3: Specific rules for the preparation of fish and fishery products Microbiology of food and animal feeding stuffs Preparation of test samples. 2 (SABS ISO 6892) SANS 6938:1984/ISO 6938:1984. Ed. Ed. 1 1 SANS 6887-3:2004/ISO 6887-3:2003. Ed. IDT. Ed.Burning behaviour . Ed. 1 (SABS ISO 6887-1) Edition Title 1 Microbiology of food and animal feeding stuffs Preparation of test samples.Joints made with mechanical fasteners . 2 1 1 Page 146 .Burning behaviour . 1 1 SANS 6887-4:2004/ISO 6887-4:2003. Ed. Ed. 1 (SABS ISO 6888-2) 1 SANS 6888-3:2005/ISO 6888-3:2003. Ed. attachments and sprockets SANS 6887-2:2004/ISO 6887-2:2003. 1 (SABS ISO 6891) SANS 6892:1998/ISO 6892:1998.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6887-1:1999/ISO 6887-1:1999. Ed.Working positions . IDT. 2 (SABS ISO 6940) SANS 6941:2004/ISO 6941:2003. IDT. initial suspension and decimal dilutions for microbiological examination Part 4: Specific rules for the preparation of products other than milk and milk products. Ed. Ed.Determination of ease of ignition of vertically oriented specimens Textile fabrics . Ed. 2 (SABS ISO 6941) SANS 6946:2007/ISO 6946:1996. IDT. IDT. 1 (SABS ISO 6888-1) 1 SANS 6888-2:1999/ISO 6888-2:1999. IDT.General principles for the determination of strength and deformation characteristics Metallic materials . IDT. initial suspension and decimal dilutions for microbiological examination Part 1: General rules for the preparation of the initial suspension and decimal dilutions Microbiology of food and animal feeding stuffs Preparation of test samples. 1 (SABS ISO 6938) SANS 6940:2005/ISO 6940:2004. 1 1 2 1 2 2 1 SANS 6947:1990/ISO 6947:1990.Measurement of flame spread properties of vertically oriented specimens Building components and building elements Thermal resistance and thermal transmittance Calculation method Welds .Natural fibres . Ed.Definitions of angles of slope and rotation Cranked-link drag chains of welded construction. meat and meat products. 1 1 SANS 6888-1:1999/ISO 6888-1:1999. IDT. 1 1 SANS 6891:1983/ISO 6891:1983. IDT. initial suspension and decimal dilutions for microbiological examination Part 2: Specific rules for the preparation of meat and meat products Microbiology of food and animal feeding stuffs Preparation of test samples. Ed. and fish and fishery products Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 1: Technique using Baird-Parker agar medium Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 2: Technique using rabbit plasma fibrinogen agar medium Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (staphylococcus aureus and other species) Part 3: Detection and MPN technique for low numbers Timber structures .Tensile testing at ambient temperature Textiles . IDT. IDT. IDT. IDT. Ed. IDT. 2 (SABS ISO 6947) SANS 6971:2006/ISO 6971:2002.Generic names and definitions Textile fabrics . IDT. 1 (SABS ISO 7211-3) SANS 7211-4:1984/ISO 7211-4:1984. IDT. 2 1 Metallic and other non-organic coatings . IDT. Ed.Construction . IDT.Construction .Methods of analysis Part 5: Determination of linear density of yarn removed from fabric Microbiology of food and animal feeding stuffs General requirements and guidance for microbiological examinations Fire detection and alarm systems Part 16: Sound system control and indicating equipment Fire detection and alarm systems Part 19: Design.Woven fabrics . IDT. Ed.Methods of analysis Part 3: Determination of crimp of yarn in fabric Textiles .Methods of analysis Part 2: Determination of number of threads per unit length Textiles . Ed. high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels . Ed. Ed. Ed.Specifications Graphical symbols . IDT. Ed.Woven fabrics . Ed.Foam concentrates Part 2: Specification for medium and high expansion foam concentrates for top application to waterimmiscible liquids Fire extinguishing media . 1 1 SANS 6988:1985/ISO 6988:1985. 1 1 Information technology . 1 (SABS ISO 7211-2) SANS 7211-3:1984/ISO 7211-3:1984.Testing of the tribological behaviour of bearing materials Part 2: Testing of polymerbased bearing materials Fire extinguishing media .Security techniques Check character systems Plain bearings . IDT.Methods of analysis Part 4: Determination of twist in yarn removed from fabric Textiles . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 6972:2006/ISO 6972:2002.Construction .Sulfur dioxide test with general condensation of moisture Buried. Ed. Ed.Construction . IDT.Terms. Ed. 2 Edition Title 1 Cranked-link mill chains of welded construction. 1 1 SANS 7203-1:2007/ISO 7203-1:1995. Ed. commissioning and service of sound systems for emergency purposes Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of presumptive Escherichia coli . IDT.Foam concentrates Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids Textiles . 1 1 SANS 7203-3:2007/ISO 7203-3:1999.Most probable number technique SANS 7146:2005/ISO 7146:1993. IDT. IDT. IDT. Ed.Foam concentrates Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids Fire extinguishing media . Ed. IDT. 1 1 SANS 7211-2:1984/ISO 7211-2:1984. 1 1 SANS 7203-2:2007/ISO 7203-2:1995.Public information symbols 1 SANS 7001:2008/ISO 7001:2007. Ed. IDT. 3 1 SANS 7064:2009/ISO/IEC 7064:2003. IDT. characteristics and causes of damage and changes in appearance Plain bearings . Ed.Woven fabrics . 1 1 1 1 1 2 1 SANS 7240-19:2008/ISO 7240-19:2007. installation. attachments and sprockets Drop-forged rivetless chains for conveyors SANS 6973:2006/ISO 6973:1986. 1 1 SANS 7148-2:2005/ISO 7148-2:1999.Woven fabrics . 3 (SABS ISO 7218) SANS 7240-16:2008/ISO 7240-16:2007. Ed. 1 (SABS ISO 7211-4) SANS 7211-5:1984/ISO 7211-5:1984. IDT. 3 (SABS ISO 7251) 2 Page 147 . Ed. IDT. 1 (SABS ISO 6988) SANS 6993:2004/ISO 6993:2001. IDT. IDT. 1 (SABS ISO 7211-5) SANS 7218:2008/ISO 7218:2007. Ed. 1 1 SANS 7251:2005/ISO 7251:2005. 2 (SABS ISO 7253) SANS 7284:1993/ISO 7284:1993. IDT.Ndiethyl-1.Graphic symbols Part 1: General SANS 7296-3:2007/ISO 7296-3:2006. Ed.Ndiethyl-1. IDT.Determination of free chlorine and total chlorine Part 3: Iodometric titration method for the determination of total chlorine Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems Methods for the petrographic analysis of bituminous coal and anthracite Part 1: Vocabulary Methods for the petrographic analysis of bituminous coal and anthracite Part 2: Method of preparing coal samples Methods for the petrographic analysis of bituminous coal and anthracite Part 3: Method of determining maceral group composition Methods for the petrographic analysis of bituminous coal and anthracite Part 5: Method of determining microscopically the reflectance of vitrinite Metallic materials . IDT. Ed.Determination of resistance to neutral salt spray (fog) Resistance welding equipment .Technical characteristics and acceptance documents Household refrigerating appliances . 2 (SABS ISO 7404-1) SANS 7404-2:1985/ISO 7404-2:1985. 1 (SABS ISO 7404-2) SANS 7404-3:1994/ISO 7404-3:1994. IDT. IDT (SABS BS 7491-3) 1 1 Page 148 . 2 1 SANS 7404-1:1994/ISO 7404-1:1994.4-phenylenediamine. IDT. 1 2 1 SANS 7393-2:2005/ISO 7393-2:1985. Ed. 1 1 SANS 7393-3:2005/ISO 7393-3:1990.Bend test SANS 7371:1995/ISO 7371:1995.Graphical symbols Part 3: Tower cranes SANS 7363:2002/ISO 7363:1986. 1 1 1 1 1 1 SANS 7439:2009/ISO 7439:2002.Determination of free chlorine and total chlorine Part 1: Titrimetric method using N. 1 1 Cranes and lifting appliances . Ed.Refrigerators with or without low-temperature compartment Characteristics and test methods Water quality . Ed. IDT. Ed. 2 (SABS ISO 7284) Edition Title 2 Paints and varnishes . 2 (SABS ISO 7371) SANS 7393-1:2005/ISO 7393-1:1985. Ed. IDT.Determination of free chlorine and total chlorine Part 2: Colorimetric method using N. IDT. Ed. 2 1 SANS 7396-2:2008/ISO 7396-2:2007. IDT. Ed. Ed. Ed. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 7253:1996/ISO 7253:1996. 2 (SABS ISO 7404-3) SANS 7404-5:1994/ISO 7404-5:1994. IDT. tests Glass fibre reinforced plastics cisterns for cold-water storage Part 2: Specification for one-piece cisterns of nominal capacity from 500 l to 25 000 l Glass fibre reinforced plastics cisterns for cold water storage Part 3: Specification for sectional tanks SANS 7491-2:1992/BS 7491-2:1992. as used in the automobile industry Graphical symbols for resistance welding equipment 1 SANS 7286:1986/ISO 7286:1986. IDT. 1 (SABS ISO 7286) SANS 7296-1:2007/ISO 7296-1:1991. Ed. 2 1 Copper-bearing intra-uterine contraceptive devices Requirements. Ed. 1 1 Cranes . Ed.Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding.4-phenylenediamine Water quality . 1 1 1 Cranes . IDT. IDT. IDT. Ed. 2 (SABS ISO 7404-5) SANS 7438:2003/ISO 7438:1985. IDT. IDT (SABS BS 7491-2) SANS 7491-3:1994/BS 7491-3:1994. IDT. for routine control purposes Water quality . IDT. 3 (SABS ISO/IEC 7810) 2 Identification cards . Ed. 1 (SABS ISO 7593) SANS 7619:2003/ISO 7619:1997. IDT. IDT.Determination of indentation hardness Part 2: IRHD pocket meter method Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Chlorinated poly(vinyl chloride) (PVC-C) Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Acrylonitrile-butadiene-styrene (ABS) Paints and varnishes .Wrapping test SANS 7810:2004/ISO/IEC 7810:2003.Colorimetry Part 2: Colour measurement Paints and varnishes .Controls .Controls . Ed. 1 1 SANS 7675:2004/ISO 7675:2003. Ed. IDT. 1 1 SANS 7801:2003/ISO 7801:1984. 1 (SABS ISO 7724-1) SANS 7724-2:1984/ISO 7724-2:1984. 1 (SABS ISO 7724-2) SANS 7724-3:1984/ISO 7724-3:1984. vulcanized or thermoplastic .Sheet and strip 3 mm thick or less . 1 1 SANS 7752-3:2007/ISO 7752-3:1993. Ed. 2 1 SANS 7724-1:1984/ISO 7724-1:1984.Determination of compression stress-strain properties Lifting appliances . IDT.Layout and characteristics Part 2: Basic arrangement and requirements for mobile cranes Cranes . 1 (SABS ISO 7592) SANS 7593:1986/ISO 7593:1986.Layout and characteristics . IDT.Reverse bend test Metallic materials . vulcanized or thermoplastic . Ed. IDT. 2 1 SANS 7682:2006/ISO 7682:2003. IDT. Ed.Colorimetry Part 1: Principles 1 1 1 1 SANS 7619-2:2009/ISO 7619-2:2004. 2 Edition Title 1 Wire rope slings for general purposes Characteristics and specifications Electroplated coatings of tin-lead alloys Specification and test methods Calibrated round steel link lifting chains .Controls .Controls . Ed.Reverse bend test 1 1 SANS 7752-1:2007/ISO 7752-1:1983. Ed. IDT. 1 1 Metallic materials . Ed.Part 5: Overhead travelling cranes and portal bridge cranes Metallic materials .Wire . 1 1 SANS 7752-2:2007/ISO 7752-2:1985.Colorimetry Part 3: Calculation of colour differences Rubber.Physical characteristics Page 149 . IDT. 1 1 SANS 7799:2003/ISO 7799:1985. IDT. 1 1 SANS 7802:2003/ISO 7802:1983. Ed. Ed. IDT. IDT. 1 (SABS ISO 7587) SANS 7592:1983/ISO 7592:1983. IDT. Ed. 1 (SABS ISO 7531) SANS 7587:1986/ISO 7587:1986.Grade T(8) Rubber . 1 1 SANS 7752-5:2002/ISO 7752-5:1985.Guidelines to proper use and maintenance Chain slings assembled by methods other than welding . IDT. Ed.Layout and characteristics Part 1: General principles Lifting appliances . IDT. IDT. Ed. 1 1 1 Paints and varnishes . 1 (SABS ISO 7724-3) SANS 7743:2003/ISO 7743:1989.Wire . Ed. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 7531:1987/ISO 7531:1987. Ed. IDT.Determination of indentation hardness by means of pocket hardness meters Rubber. IDT. Ed. Ed. Ed.Layout and characteristics Part 3: Tower cranes Lifting appliances . Ed. Integrated circuit cards .Integrated circuit cards Part 11: Personal verification through biometric methods SANS 7811-1:2004/ISO/IEC 7811-1:2002. Ed. IDT. Ed.High coercivity Identification cards . 3 2 (SABS ISO/IEC 7811-2) SANS 7811-6:2009/ISO/IEC 7811-6:2008. Ed. Ed. IDT. Ed.Integrated circuit cards Part 2: Cards with contacts . 1 1 (SABS ISO/IEC 7816-10) SANS 7816-11:2005/ISO/IEC 7816-11:2004. 2 2 (SABS ISO/IEC 7816-3) SANS 7816-3:2009/ISO/IEC 7816-3:2006. IDT. IDT.Integrated circuit cards Part 6: Interindustry data elements for interchange Identification cards . 2 2 (SABS ISO/IEC 7816-8) SANS 7816-9:2005/ISO/IEC 7816-9:2004.Recording technique Part 6: Magnetic stripe . Ed.Integrated circuit(s) cards with contacts Part 7: Interindustry commands for Structured Card Query Language (SCQL) Identification cards . IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Identification cards .Identification cards Integrated circuit(s) cards with contacts Part 3: Electronic signals and transmission protocols Identification cards . Ed. IDT.Recording technique Part 1: Embossing Identification cards . IDT. IDT. 1 1 (SABS ISO/IEC 7816-1) SANS 7816-2:2009/ISO/IEC 7816-2:2007. IDT. IDT. Ed. 1 1 Page 150 . 6 (SABS ISO/IEC 7813) 3 SANS 7816-1:1998/ISO/IEC 7816-1:1998. 2 1 SANS 7816-10:1999/ISO/IEC 7816-10:1999. 1 1 SANS 7812-1:2008/ISO/IEC 7812-1:2006.Integrated circuit cards Part 8: Commands for security operations Identification cards . IDT. Ed. IDT. IDT. Ed.Part 3: Cards with contacts .Identification cards Financial transaction cards Identification cards . 3 3 (SABS ISO/IEC 7812-2) SANS 7813:2007/ISO/IEC 7813:2006. Ed. IDT.Identification of issuers Part 2: Application and registration procedures Information technology . 3 3 (SABS ISO/IEC 7812-1) SANS 7812-2:2008/ISO/IEC 7812-2:2007.Identification of issuers Part 1: Numbering system Identification cards . IDT. 2 2 (SABS ISO/IEC 7816-4) SANS 7816-5:2005/ISO/IEC 7816-5:2004. IDT. security and commands for interchange Identification cards . Ed. 3 3 (SABS ISO/IEC 7811-6) SANS 7811-9:2009/ISO/IEC 7811-9:2008. Ed. IDT.Integrated circuit cards Part 9: Commands for card management Identification cards .Electrical interface and transmission protocols Identification cards . Ed.Recording technique Part 2: Tactile identifier mark Identification cards .Low coercivity Identification cards . 2 2 (SABS ISO/IEC 7816-6) SANS 7816-7:1999/ISO/IEC 7816-7:1999.Integrated circuit cards Part 5: Registration of application providers Identification cards .Integrated circuit cards Part 4: Organization. Ed. IDT. 1 1 (SABS ISO/IEC 7816-7) SANS 7816-8:2005/ISO/IEC 7816-8:2004. 3 2 (SABS ISO/IEC 7811-1) SANS 7811-2:2004/ISO/IEC 7811-2:2001.Integrated circuit(s) cards with contacts Part 1: Physical characteristics Identification cards .Dimensions and location of the contacts Information technology . Ed. Ed. 2 2 (SABS ISO/IEC 7816-5) SANS 7816-6:2005/ISO/IEC 7816-6:2004.Recording technique Part 2: Magnetic stripe . Ed.Integrated circuit(s) cards with contacts Part 10: Electronic signals and answer to reset for synchronous cards Identification cards . 3 3 (SABS ISO/IEC 7816-3) SANS 7816-4:2005/ISO/IEC 7816-4:2005. IDT. Ed. 2 2 (SABS ISO/IEC 7816-2) SANS 7816-3:1997/ISO/IEC 7816-3:1997. IDT. 2 1 SANS 7899-2:2004/ISO 7899-2:2000. Ed.Refillable seamless aluminium alloy gas cylinders .Colony-count technique at 30 °C Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of Clostridium perfringens .Detection and enumeration of intestinal enterococci Part 1: Miniaturized method (Most Probable Number) for surface and waste water Water quality .Examination and determination of colour Water quality .USB electrical interface and operating procedures Identification cards .Integrated circuit cards Part 15: Cryptographic information application Small craft . IDT. 1 1 Plain bearings . Ed. Ed. Ed. IDT. 3 1 SANS 7866:1999/ISO 7866:1999.Integrated circuit cards Part 13: Commands for application management in a multiapplication environment Identification cards . 1 2 1 1 Page 151 .Determination of surfactants Part 1: Determination of anionic surfactants by measurement of the methylene blue index (MBAS) Water quality . Ed. Ed. Ed. Ed. 1 1 Gas cylinders . Ed. IDT. Ed.Colony-count technique Microbiology . IDT. IDT. Ed.Fire-resistant fuel hoses SANS 7816-12:2007/ISO/IEC 7816-12:2005. construction and testing Control charts Part 1: General guidelines 1 SANS 7875-1:2006/ISO 7875-1:1996. IDT. Ed.Determination of electrical conductivity Water quality . IDT. IDT. IDT. 2 1 SANS 7904-1:2006/ISO 7904-1:1995. 3 (SABS ISO 7937) SANS 7954:1987/ISO 7954:1987. Ed.Detection and enumeration of intestinal enterococci Part 2: Membrane filtration method Plain bearings . 3 1 Insulation caps and bushes for resistance welding equipment Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of presumptive Bacillus cereus . 2 1 Water quality .Design.Reusable natural and silicone rubber contraceptive diaphragms Requirements and tests 2 SANS 7937:2007/ISO 7937:2004. Ed. 1 (SABS ISO 7931) SANS 7932:2005/ISO 7932:2004. IDT. 1 1 SANS 7904-2:2006/ISO 7904-2:1995.Symbols Part 1: Basic symbols SANS 7887:2005/ISO 7887:1994. 1 1 SANS 7899-1:2004/ISO 7899-1:1998. 1 (SABS ISO 7954) SANS 8009:2007/ISO 8009:2004. IDT. 2 1 SANS 7888:2005/ISO 7888:1985. IDT. 1 1 SANS 7840:2008/ISO 7840:2004. IDT. 1 (SABS ISO 7866) SANS 7870-1:2008/ISO 7870-1:2007.Colony count technique at 25 °C Mechanical contraceptives .Integrated circuit cards Part 12: Cards with contacts . IDT. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Identification cards . Ed.Symbols Part 2: Applications SANS 7931:1985/ISO 7931:1985. Ed. 1 1 SANS 7816-13:2007/ISO/IEC 7816-13:2007. 1 1 SANS 7816-15:2005/ISO/IEC 7816-15:2004. IDT. IDT. Ed.General guidance for enumeration of yeasts and moulds . 1 (SABS ISO 8187) SANS 8191-1:1987/ISO 8191-1:1987. Ed. Ed. IDT. IDT. 2 1 Small craft . Ed. Ed. 2 1 1 1 Household refrigerating appliances . 1 1 SANS 8087:2008/ISO 8087:1985.Mineral wool mats for ventilated roof spaces Part 1: Specification for applications with restricted ventilation Water quality . IDT.Laboratory tests and performance requirements Machinery for forestry .Characteristics and test methods Furniture . IDT.Assessment of ignitability of upholstered furniture Part 2: Ignition source: match-flame equivalent Water quality . 2 2 SANS 8084:2003/ISO 8084:2003. 1 (SABS ISO 8230) SANS 8232:1988/ISO 8232:1988. IDT.Roll-over protective structures . IDT.Laboratory tests and performance requirements Mobile cranes . 1 1 SANS 8099:2008/ISO 8099:2000. 1 1 1 Gas welding equipment . 1 (SABS ISO 8229) SANS 8230:1997/ISO 8230:1997.Laboratory tests and performance requirements Machinery for forestry . Ed.Audible emergency evacuation signal 1 1 2 SANS 8201:1987/ISO 8201:1987. Ed. Ed.Drum and sheave sizes SANS 8083:2008/ISO 8083:2006. 1 (SABS ISO 8191-1) SANS 8191-2:1988/ISO 8191-2:1988. 1 2 1 Safety of toys Part 3: Migration of certain elements 1 Thermal insulation . cutting and allied processes Operations and baths relating to dry-cleaning machines . IDT. Ed. 2 (SABS ISO 8124-2) SANS 8124-3:1997/ISO 8124-3:1997. 1 (SABS ISO 8201) SANS 8207:2004/ISO 8207:1996. Ed. Ed.Operator protective structures . IDT. IDT.Specification for hose assemblies for equipment for welding. IDT. Ed. IDT. Ed. IDT. Ed. Ed. Ed. IDT. 1 (SABS ISO 8124-3) SANS 8144-1:2006/ISO 8144-1:1995.Determination of selected monovalent phenols Part 2: Method by derivatization and gas chromatography Projections for resistance welding SANS 8165-2:1999/ISO 8165-2:1999.Falling-object protective structures (FOPS) .Assessment of the ignitability of upholstered furniture Part 1: Ignition source: smouldering cigarette Furniture . IDT. Ed. IDT. IDT.Defining and checking of machine characteristics SANS 8229:1991/ISO 8229:1991. 1 (SABS ISO 8165-2) SANS 8167:1989/ISO 8167:1989. Ed.General guidance on the enumeration of micro-organisms by culture Acoustics . 2 2 Safety of toys Part 1: Safety aspects related to mechanical and physical properties Safety of toys Part 2: Flammability SANS 8124-2:2008/ISO 8124-2:2007. 1 (SABS ISO 8191-2) SANS 8199:2006/ISO 8199:2005. IDT.Toilet waste retention systems SANS 8124-1:2009/ISO 8124-1:2009. 1 (SABS ISO 8167) SANS 8187:1991/ISO 8187:1991. Ed. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 8082:2003/ISO 8082:2003. IDT. 1 (SABS ISO 8232) 1 1 1 Page 152 . IDT. 2 Edition Title 1 Self-propelled machinery for forestry .Refrigeratorfreezers .Vocabulary Safety requirements for dry-cleaning machines using perchloroethylene Closed-circuit dry-cleaning machines . IDT. Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment . IDT.Audiometric test methods Part 3: Speech audiometry Milk and milk products .Electrode holders Part 3: Parallel shank fixing for end thrust Rolling bearings . Ed. Ed. 1 (SABS ISO 8297) 1 1 SANS 8314:2005/ISO 8314:1987.Vocabulary 1 1 SANS 8261:2005/ISO 8261 IDF 122:2001.Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function Water quality . Ed. IDT. 1 (SABS ISO 8264) SANS 8297:1994/ISO 8297:1994.Audiometric test methods Part 1: Basic pure tone air and bone conduction threshold audiometry Acoustics .Electrode holders Part 2: Morse taper fixing Resistance spot welding . 2 1 SANS 8491:2003/ISO 8491:1998.Tube (in full section) . IDT. 2 1 1 1 Metallic coatings . Ed. IDT.Flange dimensions Water quality . 1 (SABS ISO 8253-1) SANS 8253-2:1992/ISO 8253-2:1992. initial suspensions and decimal dilutions for microbiological examination Hard coal . Ed. IDT.Engineering method Shipbuilding and marine structures .Determination of content of polar compounds Resistance spot welding . Ed. IDT. Ed. IDT. Ed. 1 (SABS ISO 8430-3) SANS 8443:2005/ISO 8443:1999.Audiometric test methods Part 2: Sound field audiometry with pure tone and narrow-band test signals Acoustics . Ed. Ed. 1 (SABS ISO 8253-2) SANS 8253-3:1996/ISO 8253-3:1996.Radial ball bearings with flanged outer ring . IDT.Bend test Page 153 . IDT. 2 (SABS33) SANS 8466-1:2002/ISO 8466-1:1990. Ed. IDT. IDT. Ed.Trunnion pieces for span bearings and lead block bearings Injection containers for injectables and accessories Part 1: Injection vials made of glass tubing Knitted fabrics . Ed. Ed. Ed. 1 (SABS ISO 8430-1) SANS 8430-2:1988/ISO 8430-2:1988. Ed.Electrode holders Part 1: Taper fixing 1:10 Resistance spot welding . 1 (SABS ISO 8362-1) SANS 8388:1998/ISO 8388:1998. 1 1 1 1 1 1 SANS 8466-2:2002/ISO 8466-2:2001. 1 1 SANS 8362-1:1989/ISO 8362-1:1989.Review of methods of measurement of ductility Animal and vegetable fats and oils . IDT.General guidance for the preparation of test samples.Calibration and evaluation of analytical methods and estimation of performance characteristics Part 2: Calibration strategy for nonlinear second-order calibration functions Small craft . Ed. 2 1 SANS 8469:2008/ISO 8469:2006. IDT. 1 (SABS ISO 8430-2) SANS 8430-3:1988/ISO 8430-3:1988. 2 1 SANS 8264:1989/ISO 8264:1989.Non-fire-resistant fuel hoses 1 SANS 8430-1:1988/ISO 8430-1:1988. IDT. 1 (SABS ISO 8388) SANS 8401:1986/ISO 8401:1986.Standards available in electronic format (PDF) October 2009 SANS Number SANS 8253-1:1989/ISO 8253-1:1989. Ed.Determination of the swelling properties using a dilatometer Acoustics . Ed. 1 (SABS ISO 8253-3) Edition Title 1 Acoustics . 1 (SABS ISO 8401) SANS 8420:2003/ISO 8420:2002. 2 1 Metallic materials .Types . IDT. IDT. IDT. IDT. IDT. IDT. 2 (SABS ISO 8499) SANS 8501-3:2008/ISO 8501-3:2006. IDT.Tube . 2 1 Woven fabrics .Flattening test SANS 8493:2003/ISO 8493:1998. 2 1 SANS 8502-5:2008/ISO 8502-5:1998. 2 1 Metallic materials .Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on cleaned surfaces Preparation of steel substrates before application of paint and related products .Drift-expanding test SANS 8494:2003/ISO 8494:1998. Ed.Description of defects .Visual assessment of surface cleanliness Part 3: Preparation grades of welds. 2 1 Metallic materials .Ring-expanding test SANS 8496:2003/ISO 8496:1998.Flanging test SANS 8495:2003/ISO 8495:1998. Ed. Ed. 1 1 SANS 8502-2:2008/ISO 8502-2:2005. Ed. 2 (SABS ISO 8528-6) 2 2 2 2 2 2 Page 154 .Ring tensile test SANS 8498:1990/ISO 8498:1990.Tube . ratings and performance Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets Reciprocating internal combustion engine driven alternating current generating sets Part 4: Controlgear and switchgear Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods SANS 8502-3:2008/ISO 8502-3:1992.Tests for the assessment of surface cleanliness Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application. Ed. Ed. Ed. IDT.Vocabulary 2 Knitted fabrics . 2 (SABS ISO 8528-4) SANS 8528-5:2008/ISO 8528-5:2005.Standards available in electronic format (PDF) October 2009 SANS Number SANS 8492:2003/ISO 8492:1998. Ed. Ed. IDT. IDT. 2 (SABS ISO 8528-3) SANS 8528-4:2008/ISO 8528-4:2005. edges and other areas with surface imperfections Preparation of steel substrates before application of paint and related products . Ed.Description of defects . Ed. Ed. Ed. 1 (SABS ISO 8498) SANS 8499:2004/ISO 8499:2003. IDT. 2 1 Metallic materials . IDT. IDT. Ed. 2 Edition Title 1 Metallic materials . IDT. Ed.Tests for the assessment of surface cleanliness Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) Preparation of steel substrates before application of paint and related products .Tube . IDT. 2 (SABS ISO 8528-1) SANS 8528-2:2008/ISO 8528-2:2005. IDT. Ed. IDT. 2 (SABS ISO 8528-2) SANS 8528-3:2008/ISO 8528-3:2005.Tube . IDT. IDT. IDT. 1 1 SANS 8528-1:2008/ISO 8528-1:2005. IDT.Vocabulary 1 Preparation of steel substrates before application of paints and related products . 2 1 Metallic materials . IDT. 2 (SABS ISO 8528-5) SANS 8528-6:2008/ISO 8528-6:2005. Ed.Tube . Ed.Cabins Part 3: Tower cranes SANS 8566-4:2008/ISO 8566-4:1998. 1 (SABS ISO 8662-3) SANS 8662-4:1994/ISO 8662-4:1994. IDT. Ed. IDT. IDT. 1 1 Page 155 .Cabins Part 4: Jib cranes SANS 8566-5:2002/ISO 8566-5:1992. Ed. 3 2 SANS 8662-1:1988/ISO 8662-1:1988. IDT. 1 1 SANS 8528-10:2006/ISO 8528-10:1998.Cabins Part 5: Overhead travelling and portal bridge cranes Data elements and interchange formats Information interchange . IDT. 1 Edition Title 1 Reciprocating internal combustion engine driven alternating current generating sets Part 7: Technical declarations for specification and design Reciprocating internal combustion engine driven alternating current generating sets Part 8: Requirements and tests for low-power generating sets Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations Reciprocating internal combustion engine driven alternating current generating sets Part 10: Measurement of airborne noise by the enveloping surface method Reciprocating internal combustion engine driven alternating current generating sets Part 12: Emergency power supply to safety services Forged steel lifting components for use with grade T(8) chain Textile floor coverings .Measurement of vibrations at the handle Part 6: Impact drills SANS 8601:2009/ISO 8601:2004. IDT. Ed. 1 1 Cranes . IDT. IDT. 1 (SABS ISO 8662-4) SANS 8662-5:2003/ISO 8662-5:1992. Ed. IDT. IDT. Ed. Ed. 1 1 Cranes . IDT. Ed. 1 1 SANS 8528-12:2006/ISO 8528-12:1997. Ed. 1 1 Cranes . Ed. Ed. Ed. Ed. 1 (SABS ISO 8662-2) SANS 8662-3:1992/ISO 8662-3:1992. 1 1 1 1 SANS 8566-2:2007/ISO 8566-2:1995.Measurement of vibrations at the handle Part 3: Rock drills and rotary hammers Hand-held portable power tools . IDT. Ed. IDT. Ed. IDT. Ed.Cabins Part 1: General 1 SANS 8528-9:2006/ISO 8528-9:1995. 1 1 SANS 8539:1986/ISO 8539:1986.Measurement of vibrations at the handle Part 1: General Hand-held portable power tools . 1 (SABS ISO 8528-7) SANS 8528-8:2006/ISO 8528-8:1995. IDT. IDT.Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers Hand-held portable power tools . 1 (SABS ISO 8662-1) SANS 8662-2:1992/ISO 8662-2:1992. IDT.Measurement of vibrations at the handle Part 4: Grinders Hand-held portable power tools . Ed. 1 (SABS ISO 8539) SANS 8543:1998/ISO 8543:1998. IDT. IDT.Measurement of vibrations at the handle Part 5: Pavement breakers and hammers for construction work Hand-held portable power tools .Representation of dates and times Hand-held portable power tools . 1 1 1 1 1 1 SANS 8662-6:2003/ISO 8662-6:1994.Standards available in electronic format (PDF) October 2009 SANS Number SANS 8528-7:1994/ISO 8528-7:1994. 1 1 Cranes .Methods for determination of mass Cranes . 2 (SABS ISO 8543) SANS 8566-1:2002/ISO 8566-1:1992. Ed. Ed.Cabins Part 2: Mobile cranes SANS 8566-3:2007/ISO 8566-3:1992. IDT.Screwdrivers for cross-recessed head screws Part 1: Driver tips Assembly tools for screws and nuts .Measurement of vibrations at the handle Part 10: Nibblers and shears Hand-held portable power tools . IDT. 1 1 SANS 8662-12:2003/ISO 8662-12:1997. 2 1 SANS 8773:2007/ISO 8773:2006. Ed. 3 1 SANS 8764-2:2009/ISO 8764-2:2004. 1 1 SANS 8662-11:2003/ISO 8662-11:1999.Measurement of vibrations at the handle Part 11: Fastener driving tools Hand-held portable power tools .1 encoding rules: Specification of Basic Encoding Rules (BER). IDT. IDT.Power measurements and declarations Small craft . IDT. 1 1 SANS 8764-1:2009/ISO 8764-1:2004. IDT.Measurement of vibrations at the handle Part 7: Wrenches. Ed. 3 1 Page 156 . Ed. 1 1 SANS 8662-14:2003/ISO 8662-14:1996. IDT. lengths of blades and marking of hand-operated screwdrivers Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Information technology . 1 1 SANS 8686-5:2003/ISO 8686-5:1992. IDT. Ed. Ed.Design principles for loads and load combinations Part 5: Overhead travelling and portal bridge cranes Assembly tools for screws and nuts . Ed. Ed. IDT. IDT.Design principles for loads and load combinations Part 3: Tower cranes Cranes . 1 1 SANS 8662-13:2003/ISO 8662-13:1997. IDT. IDT. Ed. 1 1 SANS 8662-10:2003/ISO 8662-10:1998.Measurement of vibrations at the handle Part 9: Rammers Hand-held portable power tools . screwdrivers and nut runners with impact. impulse or ratchet action Hand-held portable power tools . orbital and random orbital sanders Hand-held portable power tools . Ed. 1 1 SANS 8686-1:2009/ISO 8686-1:1989.Marine propulsion reciprocating internal combustion engines . IDT. Ed. Ed. 2 1 SANS 8770:2008/ISO 8770:2003.Screwdrivers for cross-recessed head screws Part 2: General requirements. IDT.Measurement of vibrations at the handle Part 13: Die grinders Hand-held portable power tools . 2 2 SANS 8825-1:2007/ISO/IEC 8825-1:2002. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 8662-7:2003/ISO 8662-7:1997. 1 1 Cranes . Ed.Measurement of vibrations at the handle Part 8: Polishers and rotary. Ed. Ed. 1 Edition Title 1 Hand-held portable power tools .ASN. 1 1 SANS 8662-9:2003/ISO 8662-9:1996.Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers Small craft . Ed. IDT. Ed.Design principles for loads and load combinations Part 1: General Cranes . IDT.Principal data SANS 8662-8:2003/ISO 8662-8:1997. 1 1 SANS 8665:2008/ISO 8665:2006. Ed. Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) SANS 8686-3:2007/ISO 8686-3:1998. 3 1 SANS 8666:2008/ISO 8666:2002.Measurement of vibrations at the handle Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action Hand-held portable power tools . IDT. Ed. Classification of thermal cuts Geometrical product specification and quality tolerances 2 Page 157 . Ed.1 encoding rules: Specification of Encoding Control Notation (ECN) Information technology .Steering gear . Ed. 3 (SABS ISO 9000) SANS 9001:2008/ISO 9001:2008.Cable and pulley systems Small craft . 2 (SABS ISO 9004) SANS 9013:2006/ISO 9013:2002. IDT. Ed.Determination of nitrogen content . 1 1 SANS 8833:1989/ISO 8833:1989. 1 SANS 8968-5:2006/ISO 8968-5 IDF 20-5:2001. 1 1 SANS 8826-1:2005/ISO 8826-1:1989. 1 1 SANS 8847:2008/ISO 8847:2004. 2 1 SANS 8848:2008/ISO 8848:1990.ASN.Determination of nitrogen content Part 1: Kjeldahl method Milk . IDT. Ed. Ed.1 encoding rules: Mapping W3C XML schema definitions into ASN. IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology .1 encoding rules: Specification of Packed Encoding Rules (PER) Information technology .Protection against ignition of surrounding flammable gases Small craft . 1 (SABS ISO 8914) SANS 8968-1:2006/ISO 8968-1 IDF 20-1:2001. 1 1 1 Small craft with inboard engine . 1 SANS 9000:2005/ISO 9000:2005. Ed.Requirements SANS 8914:1990/ISO 8914:1990.Fundamentals and vocabulary Quality management systems . IDT.1 encoding rules: XML Encoding Rules (XER) Information technology . IDT (SABS ISO 8833) SANS 8845:2008/ISO 8845:1994. IDT. IDT.ASN. 1 SANS 8968-4:2006/ISO 8968-4 IDF 20-4:2001. Ed.Test methods SANS 8825-2:2007/ISO/IEC 8825-2:2002. Ed. Ed.Guidelines for performance improvements Thermal cutting .Determination of nitrogen content Part 2: Block-digestion method (Macro method) Milk . IDT. Ed. 1 1 SANS 8825-5:2007/ISO/IEC 8825-5:2004.1 Technical drawings . Ed. 3 1 SANS 8825-3:2007/ISO/IEC 8825-3:2002. 4 (SABS ISO 9001) SANS 9004:2000/ISO 9004:2000. 2 (SABS ISO 9013) 1 1 1 1 1 3 4 2 Quality management systems . IDT. 1 SANS 8968-2:2006/ISO 8968-2 IDF 20-2:2001. Ed. IDT.Propeller shaft ends and bosses with 1:16 taper Small craft .Part 5: Determination of protein-nitrogen content Quality management systems .Remote steering systems SANS 8846:2008/ISO 8846:1990. Ed. IDT. Ed. IDT. IDT. IDT. 1 1 SANS 8849:2008/ISO 8849:2003. IDT.General guidance for the detection of Vibrio parahaemolyticus Milk .Rolling bearings Part 1: General simplified representation Magnetite for use in coal preparation .Electrical devices . 2 1 Small craft .Determination of nitrogen content Part 4: Determination of non-protein-nitrogen content Milk . Ed. Ed. Ed. IDT.ASN.Electrically operated direct-current bilge pumps Microbiology . IDT. IDT. Ed. Ed. IDT.ASN. IDT. 1 1 SANS 8825-4:2007/ISO/IEC 8825-4:2002. 1 (SABS ISO 9177-2) SANS 9177-3:2009/ISO 9177-3:1994. Ed.Classification and diameters 1 1 SANS 9180:2009/ISO 9180:1988. IDT. 1 (SABS ISO 9177-1) SANS 9177-2:1989/ISO 9177-2:1989. Ed.Fire protection Part 2: Craft with a hull length of over 15 m Small craft . IDT. Ed.Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation Gas tightness of equipment for gas welding and allied processes Small craft . IDT. Ed. 1 1 SANS 9097:2008/ISO 9097:1991.Fire protection Part 1: Craft with a hull length of up to and including 15 m Small craft . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 9048:1987/ISO 9048:1987. IDT. Ed. Ed. Ed. 1 1 1 1 1 1 1 Mechanical pencils Part 1: Classification. Ed. IDT. 1 (SABS ISO 9090) SANS 9093-1:2008/ISO 9093-1:1994. IDT. IDT.Seacocks and through-hull fittings Part 2: Non-metallic Small craft . Ed. IDT. 1 SANS 9126-3:2004/ISO/IEC TR 9126-3:2003. Ed. Ed.Product quality Part 4: Quality in use metrics Information processing systems .Definition and classification SANS 9126-1:2003/ISO/IEC 9126-1:2001. IDT. 1 (SABS ISO 9147) SANS 9177-1:1989/ISO 9177-1:1989. Ed. IDT. Ed. Ed.Product quality Part 1: Quality model Software engineering . 1 1 SANS 9094-1:2008/ISO 9094-1:2003.Bending strengths of HB leads Black leads for wood-cased pencils . 1 1 SANS 9117:1990/ISO 9117:1990.Product quality Part 2: External metrics Software engineering . 1 1 SANS 9126-2:2004/ISO/IEC TR 9126-2:2003. IDT. 1 (SABS ISO 9127) SANS 9147:1987/ISO 9147:1987. Ed.Product quality Part 3: Internal metrics Software engineering . 1 SANS 9126-4:2004/ISO/IEC TR 9126-4:2004.Seacocks and through-hull fittings Part 1: Metallic Small craft . Ed. 1 (SABS ISO 9117) 1 Paints and varnishes .Electric fans 1 SANS 9090:1989/ISO 9090:1989. 1 (SABS ISO 9048) SANS 9080:2004/ISO 9080:2003. IDT. IDT. IDT. performance requirements and testing Mechanical pencils Part 2: Black leads Classification and dimensions Mechanical pencils Part 3: Black leads . IDT. Ed.User documentation and cover information for consumer software packages Pig-irons . Ed. IDT. IDT. 1 1 Page 158 .Jointing products Determination of extrudability of sealants using standardized apparatus Plastics piping and ducting systems .Method of test Software engineering . 1 1 SANS 9094-2:2008/ISO 9094-2:2002. 1 Edition Title 1 Building construction . IDT. dimensions. 1 SANS 9127:1988/ISO 9127:1988. 1 1 1 SANS 9093-2:2008/ISO 9093-2:2002. Ed.Determination of through-dry state and through-dry time . 1 1 SANS 9374-3:2007/ISO 9374-3:2002.Classification and requirements Part 1: Classification.Detection and enumeration of Escherichia coli and coliform bacteria Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. 1 1 Cranes . Ed. Ed. Ed.Seals for dynamic application Part 1: General simplified representation Corrosion tests in artificial atmospheres .Silver nitrate titration with chromate indicator (Mohr's method) Water quality . IDT. Ed. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 9187-1:2007/ISO 9187-1:2006. IDT. IDT.Insulated pins for use in electrode back-ups Resistance spot welding equipment .Determination of precision for test method standards Information technology . orders. thermotolerant coliform organisms and presumptive Escherichia coli Part 2: Multiple tube (most probable number) method Water quality . 3 Edition Title 1 Injection equipment for medical use Part 1: Ampoules for injectables Technical drawings . IDT. drawing and structural qualities Cranes and related equipment .Information to be provided for enquiries.Salt spray tests Information and documentation . 2 (SABS ISO 9227) SANS 9230:2009/ISO 9230:2007. 2 (SABS ISO/IEC TR 9294) SANS 9297:2007 2 1 SANS 9308-1:2004/ISO 9308-1:2000. Ed. 3 (SABS ISO 9364) SANS 9373:2007/ISO 9373:1989. Ed. IDT. 1 1 SANS 9227:2007/ISO 9227:2006. IDT. 1 1 SANS 9294:2007/ISO/IEC TR 9294:2005. Ed. 1 (SABS ISO 9312) SANS 9313:1989/ISO 9313:1989. Ed.Accuracy requirements for measuring parameters during testing Cranes .Cooling tubes SANS 9222-1:2006/ISO 9222-1:1989. Ed. IDT. Ed. IDT. labelling and packaging SANS 9408:1999/ISO 9408:1999. 1 1 1 2 Continuous hot-dip aluminium/zinc-coated steel sheet of commercial. 2 2 1 SANS 9272:2003/ISO/TR 9272:1986.Detection and enumeration of Escherichia coli and coliform bacteria Part 1: Membrane filtration method Water quality .Guidelines for the management of software documentation Water quality .Information to be provided Part 1: General 1 SANS 9374-1:2002/ISO 9374-1:1989. 1 1 SANS 9308-3:2004/ISO 9308-3:1998.Determination of price indexes for print and electronic media purchased by libraries Rubber and rubber products . offers and supply Part 3: Tower cranes Water quality . IDT. 2 (SABS ISO 9408) 1 SANS 9454-1:1990/ISO 9454-1:1990. IDT. Ed. IDT. 1 (SABS ISO 9313) SANS 9364:2007/ISO 9364:2006.Determination of chloride . 1 1 SANS 9312:1990/ISO 9312:1990. IDT. IDT. Ed. Ed. 1 (SABS ISO 9454-1) 1 Page 159 . Ed. Ed. IDT. 2 1 SANS 9308-2:2004/ISO 9308-2:1990.Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer Soft soldering fluxes . Ed. IDT. coli in surface and waste water Resistance welding equipment . Ed.Detection and enumeration of coliform organisms. Ed.Test methods Part 9: Determination of ammonia content Soft soldering fluxes . 1 (SABS ISO 9455-10) SANS 9455-11:1991/ISO 9455-11:1991. IDT. IDT.Classification and requirements Part 2: Performance requirements Soft soldering fluxes . Ed.Test methods Part 12: Steel tube corrosion test Soft soldering fluxes . IDT. IDT. 1 (SABS ISO 9455-16) SANS 9455-17:2009/ISO 9455-17:2002.Test methods Part 15: Copper corrosion test Soft soldering fluxes . gravimetric method Soft soldering fluxes . IDT.Test methods Part 11: Solubility of flux residues Soft soldering fluxes . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 9454-2:1998/ISO 9454-2:1998. 1 (SABS ISO 9614-1) 1 1 2 1 Page 160 .Test methods Part 2: Determination of non-volatile matter.Fusion welding Part 1: Steels Qualification test of welders . Ed. IDT.Test methods Part 14: Assessment of tackiness of flux residues Soft soldering fluxes . Ed.Test methods Part 1: Determination of non-volatile matter. Ed. 2 (SABS ISO 9606-2) SANS 9614-1:1993/ISO 9614-1:1993.Test methods Part 3: Determination of acid value. IDT. 1 (SABS ISO 9455-15) SANS 9455-16:1998/ISO 9455-16:1998. IDT.Test methods Part 6: Determination and detection of halide (excluding fluoride) content Soft soldering fluxes . Ed. IDT. Ed. 1 (SABS ISO 9455-8) SANS 9455-9:1993/ISO 9455-9:1993. IDT. Ed. 1 (SABS ISO 9455-14) SANS 9455-15:1996/ISO 9455-15:1996. 1 (SABS ISO 9455-2) SANS 9455-3:1992/ISO 9455-3:1992. Ed. Ed. Ed. 1 (SABS ISO 9455-5) SANS 9455-6:1995/ISO 9455-6:1995. IDT. wetting balance method Soft soldering fluxes . Ed. cutting and allied processes Approval testing of welders . IDT.Test methods Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues Materials for equipment used in gas welding. 1 (SABS ISO 9455-3) SANS 9455-5:1992/ISO 9455-5:1992.Test methods Part 13: Determination of flux splattering Soft soldering fluxes . 1 Edition Title 1 Soft soldering fluxes . 1 (SABS ISO 9606-1) SANS 9606-2:2006/ISO 9606-2:2004. IDT. Ed.Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SANS 9539:1988/ISO 9539:1988. 1 (SABS ISO 9455-12) SANS 9455-13:1996/ISO 9455-13:1996. IDT.Test methods Part 5: Copper mirror test Soft soldering fluxes .Test methods Part 10: Flux efficacy tests. IDT.Test methods Part 8: Determination of zinc content Soft soldering fluxes . Ed. IDT. 1 (SABS ISO 9455-6) SANS 9455-8:1991/ISO 9455-8:1991. 1 (SABS ISO 9455-9) SANS 9455-10:1998/ISO 9455-10:1998. Ed. IDT.Fusion welding Part 2: Aluminium and aluminium alloys Acoustics . Ed. 1 (SABS ISO 9455-11) SANS 9455-12:1992/ISO 9455-12:1992. IDT.Test methods Part 16: Flux efficacy tests. Ed. 1 (SABS ISO 9454-2) SANS 9455-1:1990/ISO 9455-1:1990. 1 (SABS ISO 9455-1) SANS 9455-2:1993/ISO 9455-2:1993. potentiometric and visual titration methods Soft soldering fluxes . ebulliometric method Soft soldering fluxes . Ed. IDT. Ed. solder spread method Soft soldering fluxes . Ed. 1 (SABS ISO 9455-13) SANS 9455-14:1991/ISO 9455-14:1991. 1 (SABS ISO 9539) SANS 9606-1:1994/ISO 9606-1:1994. 1 Edition Title 1 Acoustics . 2 1 SANS 9798-2:2003/ISO/IEC 9798-2:1999. 1 1 SANS 9707:2009/ISO 9707:2008. IDT. IDT. 1 1 SANS 9692-2:2009/ISO 9692-2:1998. IDT. 2 2 SANS 9692-1:2007/ISO 9692-1:2003.Recommendations for joint preparation Part 4: Clad steels Information and documentation . IDT.Joint preparation Part 2: Submerged arc welding of steels Welding and allied processes . Ed. 1 1 SANS 9628:2007/ISO 9628:2006. IDT.Recommendations for joint preparation Part 1: Manual metal-arc welding. IDT.Security techniques Digital signature schemes giving message recovery Part 2: Integer factorization based mechanisms Information technology . 1 (SABS ISO 9614-2) SANS 9614-3:2005/ISO 9614-3:2002. IDT. 1 1 SANS 9692-3:2009/ISO 9692-3:2000.Security techniques Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher Information technology . IDT.Insert bearings and eccentric locking collars .Security techniques . IDT. IDT.Recommendations for joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys Welding and allied processes .Guidance on the operation of midinfrared instruments Rolling bearings . IDT. Ed.Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning Acoustics . Ed. 1 2 1 SANS 9796-2:2007/ISO/IEC 9796-2:2002. Ed. Ed. Ed. IDT. Ed.Requirements for permanence Information and documentation . IDT. 2 1 Page 161 .Determination of milkfat. 1 1 SANS 9706:2006/ISO 9706:1994. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 9614-2:1996/ISO 9614-2:1996. 2 1 SANS 9712:2009/ISO 9712:2005. IDT. IDT.Entity authentication Part 2: Mechanisms using symmetric encipherment algorithms Information technology . gas welding. newspapers. 2 1 SANS 9796-3:2007/ISO/IEC 9796-3:2006.Remote steering systems for single outboard motors of 15 kW to 40 kW power Information technology . 1 1 SANS 9798-1:2003/ISO/IEC 9798-1:1997. 3 (SABS ISO 9712) SANS 9775:2008/ISO 9775:1990.Security techniques . IDT. Ed.Entity authentication Part 1: General Information technology . Ed. gas-shielded metal-arc welding.Qualification and certification of personnel Small craft .Paper for documents . TIG welding and beam welding of steels Welding and allied processes . Ed. 1 1 SANS 9692-4:2009/ISO 9692-4:2003.Entity authentication Part 3: Mechanisms using digital signature techniques 1 SANS 9622:2005/ISO 9622:1999. Ed. Ed. 1 1 SANS 9797-2:2003/ISO/IEC 9797-2:2002. Ed. Ed. Ed.Security techniques . periodicals and electronic publications Non-destructive testing . Ed. Ed. IDT. protein and lactose content . Ed. 2 1 SANS 9797-1:2003/ISO/IEC 9797-1:1999.Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning Whole milk .Security techniques Digital signature schemes giving message recovery Part 3: Discrete logarithm based mechanisms Information technology . 2 1 SANS 9798-3:2003/ISO/IEC 9798-3:1998.Statistics on the production and distribution of books.Security techniques Message Authentication Codes (MACs) Part 2: Mechanisms using a dedicated hash-function Information technology .Boundary dimensions and tolerances Welding and allied processes . IDT. Ed. Ed. Ed. IDT. Ed. 1 (SABS ISO 9809-2) 1 SANS 9809-3:2000/ISO 9809-3:2000. 1 1 Cranes .Sampling of pulverized coal conveyed by gases in direct fired coal systems Products in fibre-reinforced cement . 1 1 SANS 9926-3:2007/ISO 9926-3:2005.Entity authentication Part 5: Mechanisms using zeroknowledge techniques Information technology . IDT. Ed. construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa Gas cylinders .Crane driving manual Part 1: General SANS 9931:1991/ISO 9931:1991.Effect of dry heat on fabrics under low pressure Part 1: Procedure for dry-heat treatment of fabrics Textiles . IDT. IDT. Ed.Long corrugated or asymmetrical section sheets and fittings for roofing and cladding Non-destructive testing .Refillable seamless steel gas cylinders . 1 1 Page 162 .Refillable seamless steel gas cylinders .Effect of dry heat on fabrics under low pressure Part 2: Determination of dimensional change in fabrics exposed to dry heat Cranes . IDT.Entity authentication Part 4: Mechanisms using a cryptographic check function Information technology .Refillable seamless steel gas cylinders .Security techniques . 1 1 SANS 9926-1:2006/ISO 9926-1:1990. Ed. Ed.Training of drivers Part 3: Tower cranes SANS 9928-1:2006/ISO 9928-1:1990.Design. IDT.Magnetic particle testing Part 1: General principles Cranes . IDT. IDT. Ed. Ed. IDT.Test method Thermoplastics pipes for the transport of fluids Determination of pendulum impact strength by the Charpy method Part 1: General test method Thermoplastics pipes for the transport of fluids Determination of pendulum impact strength by the Charpy method Part 2: Test conditions for pipes of various materials Textiles . 2 (SABS ISO 9852) SANS 9854-1:1994/ISO 9854-1:1994.Design.Training of drivers Part 1: General SANS 9798-4:2003/ISO/IEC 9798-4:1999. 1 (SABS ISO 9854-1) SANS 9854-2:1994/ISO 9854-2:1994. 1 (SABS ISO 9854-2) 1 2 1 1 SANS 9866-1:2003/ISO 9866-1:1991.Information labels Part 3: Tower cranes 1 1 SANS 9942-3:2007/ISO 9942-3:1999. Ed. 1 1 SANS 9866-2:2003/ISO 9866-2:1991. 2 2 SANS 9798-6:2007/ISO/IEC 9798-6:2005.Security techniques . construction and testing Part 3: Normalized steel cylinders Unplasticized poly(vinyl chloride) (PVC-U) pipes Dichloromethane resistance at specified temperature (DCMT) . IDT. Ed. Ed. 1 1 SANS 9809-1:1999/ISO 9809-1:1999. IDT. Ed. 1 1 Cranes . 1 (SABS ISO 9931) SANS 9933:1995/ISO 9933:1995. 2 1 SANS 9798-5:2006/ISO/IEC 9798-5:2004. IDT. IDT. IDT. construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa Gas cylinders . IDT.Security techniques . Ed. Ed. 1 (SABS ISO 9933) SANS 9934-1:2004/ISO 9934-1:2001. 1 1 Coal . IDT.Design. Ed. IDT. IDT. 1 (SABS ISO 9809-3) SANS 9852:2008/ISO 9852:2007. Ed. 1 (SABS ISO 9809-1) 1 SANS 9809-2:2000/ISO 9809-2:2000.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology . Ed.Entity authentication Part 6: Mechanisms using manual data transfer Gas cylinders . data elements and structures Lighters . 1 1 SANS 10002:2005/ISO 10002:2004. Ed.Customer satisfaction Guidelines for dispute resolution external to organizations Terms and definitions for textiles and textile merchandise The preservative treatment of timber SANS 10001:2008/ISO 10001:2007. 1 1 SANS 10003:2008/ISO 10003:2007. IDT. Ed.01 4 4 3 2 1 SANS 10015:1999/ISO 10015:1999.Messages between the integrated circuit card and the card accepting device Part 2: Functions. manufacture.Basic design. IDT.Guidelines for training 1 SANS 10011:2007 (SABS 011) SANS 10012:2004 (SABS 012) SANS 10013-1:2006/ECE R24:1986. use and maintenance The waterproofing of buildings (including dampproofing and vapour barrier installation) 3. Ed. Ed.01 Colour marking and identification of medical gas cylinders and anaesthetic apparatus Quality management systems . 1 4. ISO 1585:1982.Customer satisfaction Guidelines for codes of conduct for organizations Quality management . Ed. IDT. IDT. IDT. 1 (SABS ISO 10015) SANS 10019:2008 (SABS 019) SANS 10021:2006 (SABS 021) 1 6 Transportable containers for compressed. IDT.Customer satisfaction Guidelines for complaints handling in organizations Quality management . dissolved and liquefied gases .Safety specification SANS 9994:2008/ISO 9994:2005. NEQ (SABS 013-1) SANS 10013-2:2006 (SABS 013-2) SANS 10013-3:2006/ECE R24:1986. NEQ (SABS 013-3) SANS 10014:2006/ISO 10014:2006. Ed. 1 1 SANS 10004:2005 (SABS 04) SANS 10005:2006 (SABS 05) SANS 10006:2006 (SABS 06) SANS 10007:2004/ISO 10007:2003. IDT. 2 4 7. 1 (SABS ISO 9992-2) Edition Title 1 Financial transaction cards . Ed. textile articles and clothing The use of light metals in hazardous locations at mines The determination of performance (at net power) of internal combustion engines Part 1: Road vehicle internal combustion engines at sea level The determination of performance (at net power) of internal combustion engines Part 2: Compression ignition engines at altitude The determination of performance (at net power) of internal combustion engines Part 3: Agricultural vehicle internal combustion engines at sea level Quality management .Guidelines for realizing financial and economic benefits Quality management . NEQ.02 Page 163 . IDT.01 3. 4 (SABS ISO 9994) SANS 9998:2004/ISO 9998:1991.Guidelines for configuration management Care-labelling of textile piece-goods. Ed.Practices for evaluating and controlling microbiological colony count media used in water quality tests Quality management .Standards available in electronic format (PDF) October 2009 SANS Number SANS 9992-2:1998/ISO 9992-2:1998. Ed. IDT. messages (commands and responses). 1 3 1 Water quality . Standards available in electronic format (PDF) October 2009 SANS Number SANS 10034-1:2009/ISO 34-1:2004, IDT, Ed. 2 Edition Title 2 Rubber, vulcanized or thermoplastic - Determination of tear strength Part 1: Trouser, angle and crescent test pieces Rubber, vulcanized or thermoplastic - Determination of tear strength Part 2: Small (Delft) test pieces Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties The installation of wood and laminate flooring SANS 10034-2:2009/ISO 34-2:2007, IDT, Ed. 2 2 SANS 10037:2009/ISO 37:2005, IDT, Ed. 4 2 SANS 10043:2009 (SABS 043) SANS 10044-1:2004 (SABS 044-1) SANS 10044-2:2004 (SABS 044-2) SANS 10047:2007 (SABS 047) SANS 10048:2009/ISO 48:2007, IDT, Ed. 4 4.01 3 Welding Part 1: Glossary of terms 3 Welding Part 2: Symbols 5.01 The testing of motor vehicles for roadworthiness 2 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) Food hygiene management SANS 10049:2001 (SABS 049) SANS 10052:2007 (SABS 052) SANS 10055-1:2003 3 1.02 The construction of strongrooms 1 ISO 9001: 2000 Process auditing Part 1: Concepts and application ISO 9001:2000 Process auditing Part 2: ISO 9001 Process capability model and compliance indicators ISO 9001: 2000 Process auditing Part 3: Generic process performance model and work products ISO 9001: 2000 Process auditing Part 4: Process performance model and work products for information technology The installation of communal and single antenna systems for the reception of television and sound broadcast transmissions Part 1: VHF and UHF television and VHF sound antenna systems The installation of communal and single antenna systems for the reception of television and sound broadcast transmissions Part 2: Satellite antenna systems Fixing of concrete interlocking roofing tiles SANS 10055-2:2003 1 SANS 10055-3:2003 1 SANS 10055-4:2003 1 SANS 10061-1:2008 (SABS 061-1) 3.03 SANS 10061-2:2008 (SABS 061-2) 1.01 SANS 10062:2003 (SABS 062) SANS 10064:2005 (SABS 064) SANS 10066:2007 (SABS 066) 2.02 3 The preparation of steel surfaces for coating 3 Application of thermal process control to low-acid fish canning factories Page 164 Standards available in electronic format (PDF) October 2009 SANS Number SANS 10070:2007 (SABS 070) SANS 10073:1974 (SABS 073) SANS 10076-1:2004 (SABS 076-1) SANS 10076-2:2004 (SABS 076-2) SANS 10076-3:2004 (SABS 076-3) SANS 10076-4:2004 (SABS 076-4) SANS 10076-5:2004 (SABS 076-5) SANS 10076-6:2004 (SABS 076-6) SANS 10076-7:2004 (SABS 076-7) SANS 10079:2008 (SABS 079) SANS 10080:2009 (SABS 080) SANS 10082:2007 (SABS 082) SANS 10083:2004 (SABS 083) SANS 10085-1:2004 Edition Title 3.02 The installation of resilient thermoplastic and similar flexible floor covering materials The safe application of masonry-type facings to buildings The assessment of defects in textile piece-goods and made-up articles Part 1: Defects in woven piece-goods (cellulosic and cellulosic blends) The assessment of defects in textile piece-goods and made-up articles Part 2: Defects in woven terry towelling The assessment of defects in textile piece-goods and made-up articles Part 3: Defects in woven ducks The assessment of defects in textile piece-goods and made-up articles Part 4: Defects in knitted piece-goods The assessment of defects in textile piece-goods and made-up articles Part 5: Defects in woven woollen and worsted piece-goods The assessment of defects in textile piece-goods and made-up articles Part 6: Defects in woven filament piece-goods The assessment of defects in textile piece-goods and made-up articles Part 7: Defects in household articles The use, care and protection of grinding wheels 2 4 2 2 2 2 2 2 2.01 2.02 The rodentproofing of buildings 4 Timber frame buildings 5 The measurement and assessment of occupational noise for hearing conservation purposes The design, erection, use and inspection of access scaffolding Part 1: Steel access scaffolding The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines The installation, inspection and maintenance of equipment used in explosive atmospheres Part 2: Electrical apparatus installed underground in mines The installation, inspection and maintenance of equipment used in explosive atmospheres Part 3: Repair and overhaul of apparatus used in explosive atmospheres The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 1: Liquefied petroleum gas installations involving gas storage containers of individual water capacity not exceeding 500 L and a combined water capacity not exceeding 3 000 L per installation 1.01 SANS 10086-1:2003 (SABS 086-1) SANS 10086-2:2006 3.03 1 SANS 10086-3:2001 (SABS 086-3) 1.01 SANS 10087-1:2008 (SABS 087-1) 5 Page 165 Standards available in electronic format (PDF) October 2009 SANS Number SANS 10087-2:1977 (SABS 087-2) Edition Title 2 The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 2: Installations in mobile units and small non-permanent buildings The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 3: Liquefied petroleum gas installations involving storage vessels of individual water capacity exceeding 500 L The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 4: Transportation of LPG in bulk by road The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 6: The application of liquefied petroleum and compressed natural gases as engine fuels for internal combustion engines The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 7: Storage and filling premises for refillable liquefied petroleum gas (LPG) containers of gas capacity not exceeding 9 kg and the storage of individual gas containers not exceeding 48 kg. The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations Part 8: The fuelling of fork lift trucks and other LP gas operated vehicles The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 10: Mobile filling stations for refillable liquefied petroleum gas (LPG) containers of capacity not exceeding 9 kg The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations The petroleum industry - Part 2: Electrical and other installations in the distribution and marketing sector The petroleum industry Part 3: The installation of underground storage tanks, pumps/dispensers and pipework at service stations and consumer installations Community protection against fire SANS 10087-3:2008 (SABS 087-3) 4 SANS 10087-4:1979 (SABS 087-4) 2 SANS 10087-6:2006 (SABS 087-6) 4.01 SANS 10087-7:2007 (SABS 087-7) 3 SANS 10087-8:1976 (SABS 087-8) 1 SANS 10087-10:2006 (SABS 087-10) 1.01 SANS 10089-1:2008 (SABS 089-1) SANS 10089-2:2007 (SABS 089-2) SANS 10089-3:1999 (SABS 089-3) 4.03 3 3 SANS 10090:2003 (SABS 090) SANS 10091:2009 (SABS 091) SANS 10092:2004 (SABS 092) SANS 10094:2005 (SABS 094) SANS 10096:2008 (SABS 096) 3 2.03 The safe working of power-driven woodworking machinery Caravan parks 3 4 The use of high-strength friction-grip bolts 2.04 The manufacture of finger-jointed structural timber Page 166 Standards available in electronic format (PDF) October 2009 SANS Number SANS 10098-1:2007 (SABS 098-1) SANS 10098-2:2005 (SABS 098-2) SANS 10100-1:2000 (SABS 0100-1) SANS 10100-2:1992 (SABS 0100-2) SANS 10101:2008 (SABS 0101) SANS 10102-1:2005 (SABS 0102-1) SANS 10102-2:1987 (SABS 0102-2) SANS 10103:2008 (SABS 0103) SANS 10104:1991 (SABS 0104) SANS 10105-1:2005 (SABS 0105-1) SANS 10105-2:2005 (SABS 0105-2) SANS 10106:2006 (SABS 0106) SANS 10107:1996 (SABS 0107) SANS 10108:2005 (SABS 0108) SANS 10109-1:2009 (SABS 0109-1) SANS 10109-2:2004 (SABS 0109-2) SANS 10111-1:1993 (SABS 0111-1) SANS 10111-2-1:2007/ISO 1101:2004, IDT, Ed. 2 (SABS 0111-2-1) Edition Title 3.03 Public lighting Part 1: The lighting of public thoroughfares Public lighting Part 2: The lighting of certain specific areas of streets and highways The structural use of concrete Part 1: Design 2 2.02 2 The structural use of concrete Part 2: Materials and execution of work Standard nomenclature for stitches, seams, and stitchings The selection of pipes for buried pipelines Part 1: General provisions Selection of pipes for buried pipelines Part 2: Rigid pipes The measurement and rating of environmental noise with respect to annoyance and to speech communication Handrailing and balustrading (safety aspects) 1.01 2.01 2 6 2 3 The use and control of fire-fighting equipment Part 1: Portable and wheeled (mobile) fire extinguishers The use and control of fire-fighting equipment Part 2: Fire hose reels, hydrants and booster connections The installation, maintenance, repair and replacement of domestic solar water heating systems The design and installation of ceramic tiling 3 3 2 5 The classification of hazardous locations and the selection of apparatus for use in such locations Concrete floors Part 1: Bases to concrete floors 3 3 Concrete floors Part 2: Finishes to concrete floors 3.01 Engineering drawing Part 1: General principles 2 Engineering drawing Part 2: Geometrical tolerancing Section 1: Tolerancing of form, orientation, location and run-out - Generalities, definitions, symbols, indications on drawings Engineering drawing Part 2: Geometrical tolerancing Section 2: Datums and datum-systems for geometrical tolerances SANS 10111-2-2:1993/ISO 5459:1981, IDT, Ed. 1 (SABS 0111-2-2) 1 Page 167 Standards available in electronic format (PDF) October 2009 SANS Number SANS 10111-2-3:2008/ISO 2692:2006, IDT, Ed. 2 (SABS 0111-2-3) Edition Title 2 Geometrical product specifications (GPS) Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) Geometrical Product Specifications (GPS) Geometrical tolerancing - Positional tolerancing Engineering drawing Part 2: Geometrical tolerancing Section 5: Fundamental tolerancing principle Engineering drawing Part 3: Guidelines for the interpretation and verification methods of geometrical tolerancing The installation of polyethylene and poly(vinyl chloride)(PVC-U and PVC-M) pipes Interior lighting Part 1: Artificial lighting of interiors SANS 10111-2-4:2005/ISO 5458:1998, IDT, Ed. 2 (SABS 0111-2-4) SANS 10111-2-5:1993/ISO 8015:1985, IDT, Ed. 1 (SABS 0111-2-5) 2 1 SANS 10111-3:1993/ISO/TR 5460:1985, MOD, Ed. 1 1 (SABS 0111-3) SANS 10112:2003 (SABS 0112) SANS 10114-1:2005 (SABS 0114-1) SANS 10114-2:2009 (SABS 0114-2) SANS 10117:2008 (SABS 0117) SANS 10118:2009 (SABS 0118) SANS 10119:2001 (SABS 0119) SANS 10120-1:1986 (SABS 0120-1) SANS 10120-2 INTRO:1986 (SABS 0120-2 INTRO) 3 2.01 2.02 3 2.01 1.02 Interior lighting Part 2: Emergency lighting Calculation and prediction of aircraft noise around airports for land use purposes The aerial application of pesticides 3 Reduction of explosion hazards presented by electrical equipment - Segregation, ventilation and pressurization Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 1: Format and contents Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification, Introduction Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section A: General Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AA: General (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AB: Engineer's office Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AD: General (small dams) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AH: General (structural) 3 SANS 10120-2 A:1986 (SABS 0120-2 A) 2 SANS 10120-2 AA:1986 (SABS 0120-2 AA) 3 SANS 10120-2 AB:1986 (SABS 0120-2 AB) 2 SANS 10120-2 AD:1986 (SABS 0120-2 AD) 2 SANS 10120-2 AH:1986 (SABS 0120-2 AH) 3 Page 168 Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-2 C:1982 (SABS 0120-2 C) Edition Title 2 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section C: Site clearance Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section D: Earthworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DA: Earthworks (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DB: Earthworks (pipe trenches) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DE: Small earth dams Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DK: Gabions and pitching Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DM: Earthworks (roads, subgrade) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DN: Earthworks (railway sidings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section F: Piling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section G: Concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GA: Concrete (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GB: Concrete (ordinary buildings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GE: Precast concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GF: Prestressed concrete SANS 10120-2 D:1982 (SABS 0120-2 D) 2 SANS 10120-2 DA:1982 (SABS 0120-2 DA) 2 SANS 10120-2 DB:1982 (SABS 0120-2 DB) 2 SANS 10120-2 DE:1984 (SABS 0120-2 DE) 1 SANS 10120-2 DK:1996 (SABS 0120-2 DK) 2 SANS 10120-2 DM:1981 (SABS 0120-2 DM) 1 SANS 10120-2 DN:1982 (SABS 0120-2 DN) 2 SANS 10120-2 F:1983 (SABS 0120-2 F) 1 SANS 10120-2 G:1982 (SABS 0120-2 G) 2 SANS 10120-2 GA:1982 (SABS 0120-2 GA) 2 SANS 10120-2 GB:1984 (SABS 0120-2 GB) 1 SANS 10120-2 GE:1984 (SABS 0120-2 GE) 1 SANS 10120-2 GF:1984 (SABS 0120-2 GF) 1 Page 169 Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-2 H:1990 (SABS 0120-2 H) Edition Title 3 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification H: Structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification HA: Structural steelwork (sundry items) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HB: Cladding and sheeting Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HC: Corrosion protection of structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HE: Structural aluminiumwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section L: Medium-pressure pipelines Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LB: Bedding (pipes) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LC: Cable ducts Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LD: Sewers Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LE: Stormwater drainage Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LF: Erf connections (water) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section LG: Pipe jacking Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section M: Roads (general) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section ME: Subbase SANS 10120-2 HA:1990 (SABS 0120-2 HA) 2 SANS 10120-2 HB:1985 (SABS 0120-2 HB) 1 SANS 10120-2 HC:1988 (SABS 0120-2 HC) 1 SANS 10120-2 HE:1983 (SABS 0120-2 HE) 1 SANS 10120-2 L:1983 (SABS 0120-2 L) 2 SANS 10120-2 LB:1983 (SABS 0120-2 LB) 2 SANS 10120-2 LC:1981 (SABS 0120-2 LC) 1 SANS 10120-2 LD:1982 (SABS 0120-2 LD) 2 SANS 10120-2 LE:1982 (SABS 0120-2 LE) 2 SANS 10120-2 LF:1983 (SABS 0120-2 LF) 1 SANS 10120-2 LG:1983 (SABS 0120-2 LG) 1 SANS 10120-2 M:1996 (SABS 0120-2 M) 2 SANS 10120-2 ME:1981 (SABS 0120-2 ME) 1 Page 170 . Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-2 MF:1981 (SABS 0120-2 MF) Edition Title 1 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MF: Base Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MFL: Base (light pavement structures) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MG: Bituminous surface treatment Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MH: Asphalt base and surfacing Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MJ: Segmented paving Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MK: Kerbing and channeling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MM: Ancillary roadworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section NB: Railway sidings (trackwork) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design. Introduction Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section A: General Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AA: General (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AB: Engineer's office Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AD: General (small dams) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AH: General (structural) SANS 10120-2 MFL:1996 (SABS 0120-2 MFL) 1 SANS 10120-2 MG:1996 (SABS 0120-2 MG) 2 SANS 10120-2 MH:1996 (SABS 0120-2 MH) 2 SANS 10120-2 MJ:1984 (SABS 0120-2 MJ) 1 SANS 10120-2 MK:1983 (SABS 0120-2 MK) 1 SANS 10120-2 MM:1984 (SABS 0120-2 MM) 1 SANS 10120-2 NB:1981 (SABS 0120-2 NB) 1 SANS 10120-3 INTRO:1986 (SABS 0120-3 INTRO) 3 SANS 10120-3 A:1986 (SABS 0120-3 A) 3 SANS 10120-3 AA:1982 (SABS 0120-3 AA) 2 SANS 10120-3 AB:1986 (SABS 0120-3 AB) 3 SANS 10120-3 AD:1986 (SABS 0120-3 AD) 2 SANS 10120-3 AH:1983 (SABS 0120-3 AH) 2 Page 171 . subgrade) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DN: Earthworks (railway sidings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section F: Piling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section G: Concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GA: Concrete (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GB: Concrete (ordinary buildings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GE: Precast concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GF: Prestressed concrete SANS 10120-3 D:1982 (SABS 0120-3 D) 2 SANS 10120-3 DA:1982 (SABS 0120-3 DA) 2 SANS 10120-3 DB:1982 (SABS 0120-3 DB) 2 SANS 10120-3 DE:1984 (SABS 0120-3 DE) 1 SANS 10120-3 DK:1996 (SABS 0120-3 DK) 2 SANS 10120-3 DM:1981 (SABS 0120-3 DM) 1 SANS 10120-3 DN:1982 (SABS 0120-3 DN) 2 SANS 10120-3 F:1983 (SABS 0120-3 F) 1 SANS 10120-3 G:1982 (SABS 0120-3 G) 2 SANS 10120-3 GA:1982 (SABS 0120-3 GA) 2 SANS 10120-3 GB:1984 (SABS 0120-3 GB) 1 SANS 10120-3 GE:1984 (SABS 0120-3 GE) 1 SANS 10120-3 GF:1984 (SABS 0120-3 GF) 1 Page 172 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-3 C:1982 (SABS 0120-3 C) Edition Title 2 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section C: Site clearance Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section D: Earthworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DA: Earthworks (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DB: Earthworks (pipe trenches) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DE: Small earth dams Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DK: Gabions and pitching Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DM: Earthworks (roads. Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-3 H:1990 (SABS 0120-3 H) Edition Title 3 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section H: Structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HA: Structural steelwork (sundry items) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HB: Cladding and sheeting Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HC: Corrosion protection of structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HE: Structural aluminiumwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section L: Medium-pressure pipelines Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LB: Bedding (pipes) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LC: Cable ducts Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LD: Sewers Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LE: Stormwater drainage Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LF: Erf connections (water) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section LG: Pipe jacking Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section M: Roads (general) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section ME: Subbase SANS 10120-3 HA:1990 (SABS 0120-3 HA) 2 SANS 10120-3 HB:1985 (SABS 0120-3 HB) 1 SANS 10120-3 HC:1988 (SABS 0120-3 HC) 1 SANS 10120-3 HE:1983 (SABS 0120-3 HE) 1 SANS 10120-3 L:1983 (SABS 0120-3 L) 2 SANS 10120-3 LB:1983 (SABS 0120-3 LB) 2 SANS 10120-3 LC:1981 (SABS 0120-3 LC) 1 SANS 10120-3 LD:1982 (SABS 0120-3 LD) 2 SANS 10120-3 LE:1982 (SABS 0120-3 LE) 2 SANS 10120-3 LF:1983 (SABS 0120-3 LF) 1 SANS 10120-3 LG:1983 (SABS 0120-3 LG) 1 SANS 10120-3 M:1996 (SABS 0120-3 M) 2 SANS 10120-3 ME:1981 (SABS 0120-3 ME) 1 Page 173 . Introduction Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section A: General Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AA: General (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AB: Engineer's office Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AD: General (small dams) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AH: General (structural) SANS 10120-3 MFL:1996 (SABS 0120-3 MFL) 1 SANS 10120-3 MG:1996 (SABS 0120-3 MG) 2 SANS 10120-3 MH:1996 (SABS 0120-3 MH) 2 SANS 10120-3 MJ:1984 (SABS 0120-3 MJ) 1 SANS 10120-3 MK:1983 (SABS 0120-3 MK) 1 SANS 10120-3 MM:1984 (SABS 0120-3 MM) 1 SANS 10120-3 NB:1981 (SABS 0120-3 NB) 1 SANS 10120-4 INTRO:1986 (SABS 0120-4 INTRO) 3 SANS 10120-4 A:1986 (SABS 0120-4 A) 3 SANS 10120-4 AA:1982 (SABS 0120-4 AA) 2 SANS 10120-4 AB:1982 (SABS 0120-4 AB) 2 SANS 10120-4 AD:1984 (SABS 0120-4 AD) 1 SANS 10120-4 AH:1983 (SABS 0120-4 AH) 2 Page 174 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-3 MF:1981 (SABS 0120-3 MF) Edition Title 1 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MF: Base Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MFL: Base (light pavement structures) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MG: Bituminous surface treatment Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MH: Asphalt base and surfacing Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MJ: Segmented paving Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MK: Kerbing and channeling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MM: Ancillary roadworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section NB: Railway sidings (trackwork) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities. Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-4 C:1982 (SABS 0120-4 C) Edition Title 2 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section C: Site clearance Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section D: Earthworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DA: Earthworks (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DB: Earthworks (pipe trenches) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DE: Small earth dams Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DK: Gabions and pitching Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DM: Earthworks (roads. subgrade) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DN: Earthworks (railway sidings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section F: Piling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section G: Concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GA: Concrete (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GB: Concrete (ordinary buildings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GE: Precast concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section GF: Prestressed concrete SANS 10120-4 D:1982 (SABS 0120-4 D) 2 SANS 10120-4 DA:1982 (SABS 0120-4 DA) 2 SANS 10120-4 DB:1982 (SABS 0120-4 DB) 2 SANS 10120-4 DE:1984 (SABS 0120-4 DE) 1 SANS 10120-4 DK:1984 (SABS 0120-4 DK) 1 SANS 10120-4 DM:1981 (SABS 0120-4 DM) 1 SANS 10120-4 DN:1982 (SABS 0120-4 DN) 2 SANS 10120-4 F:1983 (SABS 0120-4 F) 1 SANS 10120-4 G:1982 (SABS 0120-4 G) 2 SANS 10120-4 GA:1982 (SABS 0120-4 GA) 2 SANS 10120-4 GB:1984 (SABS 0120-4 GB) 1 SANS 10120-4 GE:1984 (SABS 0120-4 GE) 1 SANS 10120-4 GF:1984 (SABS 0120-4 GF) 1 Page 175 . Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-4 H:1990 (SABS 0120-4 H) Edition Title 3 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section H: Structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HA: Structural steelwork (sundry items) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HB: Cladding and sheeting Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HC: Corrosion protection of structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HE: Structural alumuniumwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section L: Medium-pressure pipelines Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LB: Bedding (pipes) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LC: Cable ducts Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LD: Sewers Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LE: Stormwater drainage Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LF: Erf connections (water) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section LG: Pipe jacking Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section M: Roads (general) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section ME: Subbase SANS 10120-4 HA:1990 (SABS 0120-4 HA) 2 SANS 10120-4 HB:1985 (SABS 0120-4 HB) 1 SANS 10120-4 HC:1988 (SABS 0120-4 HC) 1 SANS 10120-4 HE:1983 (SABS 0120-4 HE) 1 SANS 10120-4 L:1983 (SABS 0120-4 L) 2 SANS 10120-4 LB:1983 (SABS 0120-4 LB) 2 SANS 10120-4 LC:1981 (SABS 0120-4 LC) 1 SANS 10120-4 LD:1982 (SABS 0120-4 LD) 2 SANS 10120-4 LE:1982 (SABS 0120-4 LE) 2 SANS 10120-4 LF:1983 (SABS 0120-4 LF) 1 SANS 10120-4 LG:1983 (SABS 0120-4 LG) 1 SANS 10120-4 M:1996 (SABS 0120-4 M) 2 SANS 10120-4 ME:1981 (SABS 0120-4 ME) 1 Page 176 . Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-4 MF:1981 (SABS 0120-4 MF) Edition Title 1 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MF: Base Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedules of quantities Section MFL: Base (light pavement structures) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MG: Bituminous surface treatment Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MH: Asphalt base and surfacing Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MJ: Segmented paving Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MK: Kerbing and channelling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MM: Ancillary roadworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section NB: Railway sidings (trackwork) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration. Introduction Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section A: General Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AA: General (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AB: Engineer's office Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AD: General (small dams) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AH: General (structural) SANS 10120-4 MFL:1996 (SABS 0120-4 MFL) 1 SANS 10120-4 MG:1981 (SABS 0120-4 MG) 1 SANS 10120-4 MH:1981 (SABS 0120-4 MH) 1 SANS 10120-4 MJ:1984 (SABS 0120-4 MJ) 1 SANS 10120-4 MK:1983 (SABS 0120-4 MK) 1 SANS 10120-4 MM:1984 (SABS 0120-4 MM) 1 SANS 10120-4 NB:1981 (SABS 0120-4 NB) 1 SANS 10120-5 INTRO:1986 (SABS 0120-5 INTRO) 3 SANS 10120-5 A:1986 (SABS 0120-5 A) 3 SANS 10120-5 AA:1982 (SABS 0120-5 AA) 2 SANS 10120-5 AB:1986 (SABS 0120-5 AB) 3 SANS 10120-5 AD:1986 (SABS 0120-5 AD) 2 SANS 10120-5 AH:1983 (SABS 0120-5 AH) 2 Page 177 . subgrade) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DN: Earthworks (railway sidings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section F: Piling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section G: Concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GA: Concrete (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GB: Concrete (ordinary buildings) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GE: Precast concrete (structural) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GF: Prestressed concrete SANS 10120-5 D:1982 (SABS 0120-5 D) 2 SANS 10120-5 DA:1982 (SABS 0120-5 DA) 2 SANS 10120-5 DB:1982 (SABS 0120-5 DB) 2 SANS 10120-5 DE:1984 (SABS 0120-5 DE) 1 SANS 10120-5 DK:1996 (SABS 0120-5 DK) 2 SANS 10120-5 DM:1981 (SABS 0120-5 DM) 1 SANS 10120-5 DN:1982 (SABS 0120-5 DN) 2 SANS 10120-5 F:1983 (SABS 0120-5 F) 1 SANS 10120-5 G:1982 (SABS 0120-5 G) 2 SANS 10120-5 GA:1982 (SABS 0120-5 GA) 2 SANS 10120-5 GB:1984 (SABS 0120-5 GB) 1 SANS 10120-5 GE:1984 (SABS 0120-5 GE) 1 SANS 10120-5 GF:1984 (SABS 0120-5 GF) 1 Page 178 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-5 C:1982 (SABS 0120-5 C) Edition Title 2 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section C: Site clearance Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section D: Earthworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DA: Earthworks (small works) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DB: Earthworks (pipe trenches) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DE: Small earth dams Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DK: Gabions and pitching Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DM: Earthworks (roads. Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-5 H:1990 (SABS 0120-5 H) Edition Title 3 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section H: Structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HA: Structural steelwork (sundry items) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HB: Cladding and sheeting Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HC: Corrosion protection of structural steelwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HE: Structural aluminiumwork Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section L: Medium-pressure pipelines Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LB: Bedding (pipes) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LC: Cable ducts Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LD: Sewers Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LE: Stormwater drainage Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LF: Erf connections (water) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section LG: Pipe jacking Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section M: Roads (general) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section ME: Subbase SANS 10120-5 HA:1990 (SABS 0120-5 HA) 2 SANS 10120-5 HB:1985 (SABS 0120-5 HB) 1 SANS 10120-5 HC:1988 (SABS 0120-5 HC) 1 SANS 10120-5 HE:1983 (SABS 0120-5 HE) 1 SANS 10120-5 L:1983 (SABS 0120-5 L) 2 SANS 10120-5 LB:1983 (SABS 0120-5 LB) 2 SANS 10120-5 LC:1981 (SABS 0120-5 LC) 1 SANS 10120-5 LD:1982 (SABS 0120-5 LD) 2 SANS 10120-5 LE:1982 (SABS 0120-5 LE) 2 SANS 10120-5 LF:1983 (SABS 0120-5 LF) 1 SANS 10120-5 LG:1983 (SABS 0120-5 LG) 1 SANS 10120-5 M:1996 (SABS 0120-5 M) 1 SANS 10120-5 ME:1981 (SABS 0120-5 ME) 1 Page 179 . 02 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10120-5 MF:1981 (SABS 0120-5 MF) Edition Title 1 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MF: Base Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MFL: Base (light pavement structures) Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MG: Bituminous surface treatment Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MH: Asphalt base and surfacing Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MJ: Segmented paving Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MK: Kerbing and channelling Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MM: Ancillary roadworks Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section NB: Railway sidings (trackwork) Cathodic protection of buried and submerged structures The control of undesirable static electricity SANS 10120-5 MFL:1996 (SABS 0120-5 MFL) 1 SANS 10120-5 MG:1996 (SABS 0120-5 MG) 2 SANS 10120-5 MH:1996 (SABS 0120-5 MH) 2 SANS 10120-5 MJ:1984 (SABS 0120-5 MJ) 1 SANS 10120-5 MK:1983 (SABS 0120-5 MK) 1 SANS 10120-5 MM:1984 (SABS 0120-5 MM) 1 SANS 10120-5 NB:1981 (SABS 0120-5 NB) 1 SANS 10121:1977 (SABS 0121) SANS 10123:2001 (SABS 0123) SANS 10124:2006 (SABS 0124) SANS 10125:2009 (SABS 0125) SANS 10129:2006 (SABS 0129) SANS 10131:2004 1 1.01 1 Above-ground storage tanks for petroleum products SANS 10132:2009 (SABS 0132) SANS 10133:1977 (SABS 0133) SANS 10134:2008 (SABS 0134) 2.01 3.02 Page 180 .02 The installation and operation of refrigerated milk tanks The application of pesticides in food-handling.01 The application of soil insecticides for the protection of buildings The installation of flexible membrane linings in earth embankment reservoirs Plastics tape wrapping of steel pipelines 1. and catering establishments The safeness of private swimming pools 1 1. foodprocessing. 01 Refrigerating systems including plants associated with air-conditioning systems The installation and operation of cable cranes and aerial rope-ways The mechanical stress grading of softwood timber (flexural method) The labelling and marking of textiles and household textile articles Calibration of pure-tone audiometers Part 1: Air conduction 1.01 1.02 Page 181 .03 Identification colour marking Part 2: Identification of hazards and equipment in work situations Identification colour markings Part 3: Contents of pipelines Identification colour marking Part 4: Contents of taps and valves in laboratories Identification colour marking Part 5: Coding of containers for carrying lubricants and associated fluids The processing.c.01 2. and up to and including 3 000 kW installed capacity Building drawing practice 3 1.01 Fire detection and alarm systems for buildings System design.02 Concrete masonry construction 3 Laundry processes and management 4.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10136:2007 (SABS 0136) SANS 10137:2002 (SABS 0137) SANS 10139:2007/BS 5839-1:2002. installation and servicing Identification colour marking Part 1: General 2.03 1 SANS 10154-1:2004 (SABS 0154-1) 1.02 3. not exceeding 22 kV a.01 The cleaning and disinfecting of dairy equipment and soft-serve dispensing units The installation of glazing in buildings 3.06 1 SANS 10143:1980 (SABS 0143) SANS 10144:1995 (SABS 0144) SANS 10145:2000 (SABS 0145) SANS 10146:2008 (SABS 0146) SANS 10147:2009 (SABS 0147) SANS 10148:2003 (SABS 0148) SANS 10149:2008 (SABS 0149) SANS 10153:2006 1 2 Detailing of steel reinforcement for concrete 1.01 3.01 1. Ed. testing and storage of silver-gelatin microfilm for archival purposes The wiring of premises Part 1: Low-voltage installations The wiring of premises Part 2: Medium-voltage installations above 1 kV a.c.02 2. 1 (SABS 0139) SANS 10140-1:2008 (SABS 0140-1) SANS 10140-2:2008 (SABS 0140-2) SANS 10140-3:2003 (SABS 0140-3) SANS 10140-4:2006 (SABS 0140-4) SANS 10140-5:2007 (SABS 0140-5) SANS 10141:2007 (SABS 0141) SANS 10142-1:2008 (SABS 0142-1) SANS 10142-2:2009 Edition Title 2. MOD. MOD.03 1.01 1 1. testing and balancing of airconditioning ductwork Fire testing of materials.01 SANS 10169:2004 (SABS 0169) SANS 10170:2004 (SABS 0170) SANS 10173:2003 (SABS 0173) SANS 10177-1:2005 (SABS 0177-1) 1.01 The handling of chilled and frozen foods 2 The general procedures and loadings to be adopted in the design of buildings The design of foundations for buildings 1 2 The structural use of steel Part 1: Limit-state design of hot-rolled steelwork The structural use of steel Part 2: Limit-states design of cold-formed steelwork Structural use of steel Part 4: The design of coldformed stainless steel structural members The structural use of timber Part 1: Limit-states design The structural use of timber Part 2: Allowable stress design The structural use of masonry Part 1: Unreinforced masonry walling The structural use of masonry Part 2: Structural design and requirements for reinforced and prestressed masonry The overhaul of diesel fuel injection equipment 1 1 2. NEQ (SABS 0162-2) SANS 10162-4:1997 (SABS 0162-4) SANS 10163-1:2003 (SABS 0163-1) SANS 10163-2:2001 (SABS 0163-2) SANS 10164-1:1980 (SABS 0164-1) SANS 10164-2:2008 (SABS 0164-2) SANS 10166:1984 (SABS 0166) SANS 10167:2004 (SABS 0167) SANS 10168:2002/77/541/EEC:1977. 82/319/EEC:1982.02 Calibration of pure-tone audiometers Part 2: Bone conduction Accuracy in buildings 1. components and elements used in buildings Part 1: General introduction to the methods of test 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10154-2:2004 (SABS 0154-2) SANS 10155:2009 (SABS 0155) SANS 10156:2007 (SABS 0156) SANS 10160:1989 (SABS 0160) SANS 10161:1980 (SABS 0161) SANS 10162-1:2005 (SABS 0162-1) SANS 10162-2:1993/CAN/CSA S136-M89:1989.01 Page 182 .02 1 1. MOD.02 2 The installation.02 1.01 1. with modifications) Determining the performance of audible warning devices (hooters) after installation in a motor vehicle The cleaning and maintenance of floors 1. 81/576/EEC:1981. MOD (SABS 0168) Edition Title 1. and the amending EEC Directives 81/576 and 82/319.01 The quality evaluation of fusion welded joints in steel structures The installation of restraining devices (safety belts) in motor vehicles (Incorporating part of EEC Directive 77/541 'Safety belts and restraint systems of motor vehicles'. components and elements used in buildings Part 6: Non-combustibility at 300 °C of electrical insulation materials Fire testing of materials. components and elements used in buildings Part 8: Surface burning characteristics of building materials Fire testing of materials.02 1.02 1. components and elements used in buildings Part 2: Fire resistance test for building elements Fire-testing of materials.03 1.02 1.01 SANS 10177-11:2007 1.06 2. components and elements used in buildings Part 11: Large-scale fire performance evaluation of building envelope thermal insulation systems (with or without sprinklers) The measurement of noise emitted by road vehicles when stationary The measurement and assessment of acoustic environments for audiometric tests The terminology and classification of adhesives for wood Definitions for and measurement of body dimensions The installation of textile floor coverings 1. components and elements used in buildings Part 10: Surface burning characteristics of building materials using the inverted channel tunnel test Fire testing of materials.01 3. components and elements used in buildings Part 7: Fire test for fire-check properties of building elements Fire testing of materials.01 Load securement on vehicles Part 1: General requirements Load securement on vehicles Part 2: General freight SANS 10187-2:2006 1 SANS 10187-3:2006 1 Load securement on vehicles Part 3: Metal loads SANS 10187-4:2006 1 Load securement on vehicles Part 4: Timber and sugar cane Page 183 .01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10177-2:2005 (SABS 0177-2) SANS 10177-3:2005 (SABS 0177-3) SANS 10177-4:2005 (SABS 0177-4) SANS 10177-5:2007 (SABS 0177-5) SANS 10177-6:2005 (SABS 0177-6) SANS 10177-7:2005 (SABS 0177-7) SANS 10177-8:2006 Edition Title 1.01 1. components and elements used in buildings Part 3: Surface fire index of finishing materials Fire testing of materials. components and elements used in buildings Part 4: Surface fire index of floor coverings Fire testing of materials.01 1 SANS 10177-9:2006 1 SANS 10177-10:2007 1. components and elements used in buildings Part 5: Non-combustibility at 750 °C of building materials Fire testing of materials.01 Fire testing of materials. components and elements used in buildings Part 9: Small-scale burning characteristics of building materials: ignition. flame spread and heat contribution Fire testing of materials.02 1.01 SANS 10181:2003 (SABS 0181) SANS 10182:2006 (SABS 0182) SANS 10183:2000 (SABS 0183) SANS 10184:2008 (SABS 0184) SANS 10186:2009 (SABS 0186) SANS 10187-1:2009 1. IDT.01 1 SANS 10198-10:1988 (SABS 0198-10) 1 Page 184 .General provisions The selection. Ed. 2 (SABS 0191) SANS 10196:2007/ISO 3745:2003.3 kV The selection.Precision methods for anechoic and hemi-anechoic rooms The selection. handling and installation of electric power cables of rating not exceeding 33 kV Part 10: Jointing and termination of paper-insulated cables 2 2 2 2 2 2 SANS 10198-6:2004 (SABS 0198-6) SANS 10198-7:2004 (SABS 0198-7) SANS 10198-8:2007 (SABS 0198-8) SANS 10198-9:1988 (SABS 0198-9) 2 2 2.Determination of sound power levels of noise sources .Guidelines for the use of basic standards Acoustics . handling and installation of electric power cables of rating not exceeding 33 kV Part 3: Earthing systems . handling and installation of electric power cables of rating not exceeding 33 kV Part 4: Current ratings The selection. handling and installation of electric power cables of rating not exceeding 33 kV Part 7: Safety precautions The selection. 2 (SABS 0196) SANS 10198-1:2004 (SABS 0198-1) SANS 10198-2:2004 (SABS 0198-2) SANS 10198-3:2004 (SABS 0198-3) SANS 10198-4:2005 (SABS 0198-4) SANS 10198-5:2004 (SABS 0198-5) 2.01 Standard methods of garment measurement 2 Acoustics . handling and installation of electric power cables of rating not exceeding 33 kV Part 1: Definitions and statutory requirements The selection.Determination of sound power levels of noise sources using sound pressure . handling and installation of electric power cables of rating not exceeding 33 kV Part 2: Selection of cable type and methods of installation The selection. handling and installation of electric power cables of rating not exceeding 33 kV Part 8: Cable laying and installation The selection.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10187-5:2006 Edition Title 1 Load securement on vehicles Part 5: Loose bulk loads Load securement on vehicles Part 6: Containers SANS 10187-6:2006 1 SANS 10187-7:2006 1 Load securement on vehicles Part 7: Abnormal loads Load securement on vehicles Part 8: Dangerous goods Load securement on vehicles Part 9: Glass sheeting SANS 10187-8:2006 1 SANS 10187-9:2006 1 SANS 10188:2008 (SABS 0188) SANS 10191:2007/ISO 3740:2000. handling and installation of electric power cables of rating not exceeding 33 kV Part 6: Transportation and storage The selection. Ed. handling and installation of electric power cables of rating not exceeding 33 kV Part 9: Jointing and termination of extruded solid dielectricinsulated cables up to 3. IDT. handling and installation of electric power cables of rating not exceeding 33 kV Part 5: Determination of thermal and electrical resistivity of soil The selection. storage and disposal of pesticides 2.02 The measurement of noise inside motor vehicles 3 The installation and safe use of ethylene oxide (EO) sterilizers in healthcare facilities and in industry Evaluation of vehicle test stations 4. commissioning and fault location The selection. IDT.01 The measurement of noise emitted by motor vehicles in motion The handling.01 1. 1 (SABS ISO 10202-1) SANS 10204:2006 (SABS 0204) SANS 10205:2007 (SABS 0205) SANS 10206:2007 (SABS 0206) SANS 10208-1:2005 (SABS 0208-1) SANS 10208-2:2007 (SABS 0208-2) SANS 10208-3:2001 (SABS 0208-3) SANS 10208-4:2001 (SABS 0208-4) SANS 10209:2003 (SABS 0209) SANS 10210:2004 (SABS 0210) SANS 10211:2008 (SABS 0211) SANS 10213:2008 (SABS 0213) SANS 10216:2007 (SABS 0216) SANS 10217:2008 (SABS 0217) 1 1 2 2 1 Neutral earthing in medium voltage industrial power systems Financial transaction cards .Security architecture of financial transaction systems using integrated circuit cards Part 1: Card life cycle The application of fumigants 1 2.01 The heat treatment of ground-engaging parts for farming implements Page 185 . handling and installation of electric power cables of rating not exceeding 33 kV Part 11: Jointing and termination of screened polymericinsulated cables The selection.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10198-11:1988 (SABS 0198-11) Edition Title 1 The selection.01 1. handling and installation of electric power cables of rating not exceeding 33 kV Part 13: Testing. Ed.03 2. handling and installation of electric power cables of rating not exceeding 33 kV Part 12: Installation of earthing system The selection. handling and installation of electric power cables of rating not exceeding 33 kV Part 14: Installation of aerial bundled conductor (ABC) cables The design and installation of earth electrodes SANS 10198-12:1988 (SABS 0198-12) SANS 10198-13:1988 (SABS 0198-13) SANS 10198-14:1996 (SABS 0198-14) SANS 10199:2004 (SABS 0199) SANS 10200:1985 (SABS 0200) SANS 10202-1:1991/ISO 10202-1:1991.02 1.01 3 Design of structures for the mining industry Part 1: Headgear structures Design of structures for the mining industry Part 2: Sinking stages Design of structures for the mining industry Part 3: Conveyances Design of structures for the mining industry Part 4: Shaft system structures The design and construction of private swimming pools Calculating and predicting road traffic noise 3 2 1 1. Testing. commissioning and hand-over requirements Electrical security installations Part 5-1-5: CCTV installations .Installation.01 Electrical security installations Part 2: Access control 3 Electrical security installations Part 3: Electric security fences (non-lethal) Electrical security installations Part 5-1-1: CCTV installations .02 Electrical security installations Part 1: General 1.01 SANS 10222-5-1-4:2003 1 SANS 10222-5-1-5:2003 1 Page 186 .CCTV surveillance systems for use in security applications .System design requirements Electrical security installations Part 5-1-3: CCTV installations .CCTV surveillance systems for use in security applications . fuel consumption and lubricating oil consumption The determination of performance (at net power) of industrial internal combustion engines Part 2: Test methods The determination of performance (at net power) of industrial internal combustion engines Part 3: Test measurements The determination of performance (at net power) of industrial internal combustion engines Part 4: Speed governing The determination of performance (at net power) of industrial internal combustion engines Part 5: Torsional vibrations The determination of performance (at net power) of industrial internal combustion engines Part 6: Overspeed protection The selection.CCTV surveillance systems for use in security applications . use and maintenance of respiratory protective equipment The testing of geotextiles 1.01 2 SANS 10219-2:2006 (SABS 0219-2) SANS 10219-3:2006 (SABS 0219-3) SANS 10219-4:2006 (SABS 0219-4) SANS 10219-5:2006 (SABS 0219-5) SANS 10219-6:2006 (SABS 0219-6) SANS 10220:2003 (SABS 0220) SANS 10221:2007 (SABS 0221) SANS 10222-1:2007 (SABS 0222-1) SANS 10222-2:2007 (SABS 0222-2) SANS 10222-3:2006 (SABS 0222-3) SANS 10222-5-1-1:2007 (SABS 0222-5-1-1) SANS 10222-5-1-2:2007 (SABS 0222-5-1-2) SANS 10222-5-1-3:2007 (SABS 0222-5-1-3) 2 2 2 2 2 1.CCTV surveillance systems for use in security applications .02 1. planning and implementation requirements Electrical security installations Part 5-1-4: CCTV installations .Standards available in electronic format (PDF) October 2009 SANS Number SANS 10218-1:2004 (SABS 0218-1) SANS 10218-2:2004 (SABS 0218-2) SANS 10219-1:2006 (SABS 0219-1) Edition Title 2.Maintenance requirements 1.01 1.02 Acoustical properties of buildings Part 1: Grading criteria for the airborne sound insulation properties of buildings Acoustical properties of buildings Part 2: The assessment of building plans and buildings with respect to their acoustical properties The determination of performance (at net power) of industrial internal combustion engines Part 1: Standard reference conditions and declarations of power.01 1.01 1.CCTV surveillance systems for use in security applications .Operational requirements Electrical security installations Part 5-1-2: CCTV installations . Packaging and large packaging for road and rail transport Part 1: Packaging Transport of dangerous goods . Ed. MOD.Operational requirements for road vehicles Transport of dangerous goods .01 SANS 10233:2008 (SABS 0233) SANS 10234 SUPPLEMENT:2008 3 1 SANS 10234:2008 1. Ed.Health and safety Hygienic practices on commercial fishing vessels 1 2.01 The installation of replacement auto glass in motor vehicles by the direct glazing method Page 187 . NEQ.Application guidelines Non-flammable medical gas pipeline systems 1 1 The design and construction of lighting masts 2. 1 (SABS 0222-5-2) SANS 10224:1990/ISO 7396:1987. 1 (SABS 0224) SANS 10225:1991 (SABS 0225) SANS 10226:2009 (SABS 0226) SANS 10227:2007 (SABS 0227) SANS 10228:2006 (SABS 0228) SANS 10229-1:2005 Edition Title 1.Emergency information systems Part 1: Emergency information system for road transport Transport of dangerous goods .01 1 Roof and side cladding 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10222-5-2:2007/BS EN 50132-7:1997. post-installation tests and maintenance of microbiological safety cabinets Criteria for the operation of inspection authorities performing inspection in terms of the Pressure Equipment Regulations The identification and classification of dangerous goods for transport Transport of dangerous goods .Packaging and large packaging for road and rail transport Part 2: Large packaging Transport of dangerous goods .01 Electrical security installations Part 5-2: CCTV installations .03 Welding and thermal cutting processes .01 SANS 10235:2007 (SABS 0235) SANS 10237:1991 (SABS 0237) SANS 10238:2005 (SABS 0238) SANS 10239:1992 (SABS 0239) SANS 10240:2005 (SABS 0240) 2.Intermediate bulk containers for road and rail transport List of classification and labelling of chemicals in accordance with the Globally Harmonized System (GHS) Globally Harmonized System of classification and labelling of chemicals (GHS) Fibre-content labelling of textiles and textile products 2 4 1 SANS 10229-2:2007 1 SANS 10231:2006 (SABS 0231) SANS 10232-1:2007 (SABS 0232-1) SANS 10232-3:2007 (SABS 0232-3) SANS 10232-4:2007 3 3 3 1.Emergency information systems Part 3: Emergency response guides Transport of dangerous goods .Emergency information systems Part 4: Transport emergency card Transport of dangerous goods .01 The installation. 02 Tachograph centres .Non-ferrous metallic coatings on steel wire Part 1: General principles Steel wire and wire products . nitrogen and argon at consumer sites Page 188 . 1 Edition Title 1. IDT.Part 1: Management of healthcare risk waste from a healthcare facility Masonry walling SANS 10249:2009 (SABS 0249) SANS 10250:2006 1. including facilities for the installation of onboard computers The rewinding and refurbishing of rotating electrical machines Part 1: Low-voltage three-phase induction motors The manufacture and erection of timber trusses 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10241:2008 (SABS 0241) SANS 10242-1:1999 (SABS 0242-1) SANS 10243:2004 (SABS 0243) SANS 10244-1:2003/EN 10244-1:2001. safety and environmental guidelines for the construction and operation of timber treatment plants Brake drum reconditioning 2. Ed. Ed.Installation and repair facilities. replacement and repair of fixed electric storage water heating systems Health.04 3 1 Steel wire and wire products . IDT.02 Industrial gas pipelines Part 1: Distribution of oxygen.01 The cleaning of textile upholstered furniture 2 Management of healthcare waste 1 Management of healthcare waste .01 1 Automotive air-conditioning system fitment and repair centres Water supply and drainage for buildings Part 1: Water supply installations for buildings Water supply and drainage for buildings Part 2: Drainage installations for buildings Brake service workshops SANS 10252-1:2004 (SABS 0252-1) SANS 10252-2:1993 (SABS 0252-2) SANS 10253:2005 (SABS 0253) SANS 10254:2004 (SABS 0254) SANS 10255:2009 (SABS 0255) SANS 10256:2005 (SABS 0256) SANS 10257:2004 (SABS 0257) SANS 10260-1:2004 (SABS 0260-1) 2 1 1. 1 1 SANS 10245:2008 (SABS 0245) SANS 10246:1993 (SABS 0246) SANS 10247:2009 (SABS 0247) SANS 10248:2004 (SABS 0248) SANS 10248-1:2008 1.02 The reconditioning of valves for use with pipelines 1.Non-ferrous metallic coatings on steel wire Part 2: Zinc and zinc alloy coatings The maintenance of textile floor coverings SANS 10244-2:2003/EN 10244-2:2001.01 1 Accessibility of buildings to disabled persons 1.02 3 The installation.01 1.01 1. maintenance. 01 2.Welding processes Part 3: Hot-gas welding Welding of thermoplastics .Testing and approval of welders 1. operation and inspection of manriding belt conveyors in mines Homologation of motor vehicle models 1.01 SANS 10264-1:2009 (SABS 0264-1) SANS 10264-2:2009 (SABS 0264-2) SANS 10264-3:2009 (SABS 0264-3) SANS 10265:1999 (SABS 0265) SANS 10266:2007 (SABS 0266) SANS 10267:2006 (SABS 0267) SANS 10268-1:2009 (SABS 0268-1) SANS 10268-2:2004 (SABS 0268-2) SANS 10268-3:2005 (SABS 0268-3) SANS 10268-4:2004 (SABS 0268-4) SANS 10268-5:2004 (SABS 0268-5) SANS 10268-6:2003 2 2 2 1 2 3.01 1 SANS 10263-2:2008 1 SANS 10263-5:2009 1.03 Page 189 . staking and insertion Welding of thermoplastics .Welding processes Part 10: Weld defects Welding of thermoplastics .01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10260-2:2004 (SABS 0260-2) SANS 10260-3:2004 (SABS 0260-3) SANS 10260-4:2004 (SABS 0260-4) SANS 10262-1:2006 (SABS 0262-1) SANS 10263-0:2009 Edition Title 1.01 1 SANS 10268-10:2009 (SABS 0268-10) SANS 10269:2009 (SABS 0269) 1.Welding processes Part 4: Hot-gas extrusion welding Welding of thermoplastics .Welding processes Part 1: Heated-tool welding Welding of thermoplastics .01 1.01 1.03 Welding of thermoplastics .Welding processes Part 6: Ultrasonic welding.Welding processes Part 2: Electrofusion welding Welding of thermoplastics .01 Industrial gas pipelines Part 2: Distribution of hydrogen at consumer sites Industrial gas pipelines Part 3: Distribution of acetylene at consumer sites Industrial gas pipelines Part 4: Distribution of carbon dioxide at consumer sites Radio sites Part 1: Technical performance (narrowband analog mobile radio services) The warehousing of dangerous goods Part 0: General requirements The warehousing of dangerous goods Part 2: The storage and handling of gas cylinders The warehousing of dangerous goods Part 5: The storage and handling of oxidizing substances Disaster management Part 1: Terminology and implementation Disaster management Part 2: All-risk emergency operation planning Disaster management Part 3: Hazard-specific response planning The classification and labelling of dangerous substances and preparations for sale and handling The safe use.01 1.Welding processes Part 5: Solvent welding Welding of thermoplastics .01 1.03 1. Determination of tensile strain hardening exponent Motor vehicle radiator reconditioning workshops SANS 10276:2005 (SABS 0276) SANS 10278:2005 (SABS 0278) SANS 10279:2005 (SABS 0279) SANS 10280:2001 (SABS 0280) SANS 10280-1:2008/NRS 041-1:2008. 3 1. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10270:2004 (SABS 0270) SANS 10274:2005 (SABS 0274) SANS 10275:2003/ISO 10275:1993. reference sound levels and permissible sound levels of stationary road vehicles Maintenance of helmet light assemblies 1 SANS 10281:2003 (SABS 0281) SANS 10282:1997 (SABS 0282) SANS 10284:2006/ISO 284:2003. Ed. 1 Edition Title 1.Electrical conductivity Specification and test method Rolling bearings.Approval of welding procedures and welds The refurbishing of diesel engines 1. 1 1 SANS 10286:1998 (SABS 0286) SANS 10287:2000 (SABS 0287) SANS 10289:2008/ISO 10289:1999. recirculating ball. IDT.01 1 2 Conveyor belts .01 The rebuilding of automotive gearboxes 1. IDT.01 1 Condition assessment of steel wire ropes on mine winders The performance.01 Overhead power lines for conditions prevailing in South Africa Overhead power lines for conditions prevailing in South Africa Part 1: Safety Engine speed (S values).Sheet and strip .01 Welding of thermoplastics . linear motion. 1 1 1 Automatic sprinkler installations for fire-fighting purposes Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates . operation. sleeve type .Rating of test specimens and manufactured articles subjected to corrosion tests Earthing of low-voltage (LV) distribution systems 1 SANS 10292:2001 (SABS 0292) SANS 10293:1996 (SABS 0293) SANS 10294:2000 (SABS 0294) SANS 10295-1:2003 1.Metric series Mine residue SANS 10285:2005/ISO 10285:1992. IDT.01 The remanufacture of petrol engines 1. Ed. testing and maintenance of drum winders relating to rope safety Suspended access equipment Part 1: Permanently suspended access equipment Suspended access equipment Part 2: Temporary suspended platforms (TSPs) 1 1 SANS 10295-2:2005 1 Page 190 .01 1 Metallic materials . Ed. 1 1. Ed.01 1. IDT. IDT. construction and drilling of boreholes Development.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10296:2008 (SABS 0296) SANS 10297:2006 (SABS 0297) SANS 10298:2009 (SABS 0298) SANS 10299-0:2003 Edition Title 2 Hand signals used with cranes and with lifting and suspended equipment The reconditioning of external LPG cylinder valves 1.02 SANS 10299-7:2003 1 SANS 10299-8:2003 1 SANS 10299-9:2003 1 SANS 10302:2008 (SABS 0302) SANS 10304-1:2008 (SABS 0304-1) SANS 10304-2:2002 1. maintenance and management of groundwater resources Part 4: Test-pumping of water boreholes Development.01 1. maintenance and management of groundwater resources Part 9: The decommissioning of water boreholes Tail lifts.01 1.01 1.02 SANS 10299-6:2009 (SABS 0299-6) 1.01 Painting of buildings Part 4: Painting of walls. maintenance and management of groundwater resources Part 2: The design. maintenance and management of groundwater resources Part 6: The installation and commissioning of pumping equipment for production boreholes Development. maintenance and management of groundwater resources Part 8: The management of water boreholes Development.01 1. maintenance and management of groundwater resources Part 7: The rehabilitation of water boreholes Development. mobile lifts and ramps associated with vehicles The classification of pesticides and stock remedies for sale and handling in South Africa Part 1: The classification of pesticides The classification of pesticides and stock remedies for sale and handling in South Africa Part 2: The classification of stock remedies Painting of buildings Part 1: Paint and paint selection Painting of buildings Part 2: Paint application and defects Painting of buildings Part 3: Paint types 1 SANS 10299-1:2003 (SABS 0299-1) SANS 10299-2:2003 1. maintenance and management of groundwater resources Part 0: Glossary of terms Development. maintenance and management of groundwater resources Part 5: The design.02 Indirect small to medium-sized gas chlorination systems for the disinfection of water Development. selection and performance of pumping equipment for production boreholes Development. ceilings and cladding Page 191 .01 1 SANS 10299-4:2003 (SABS 0299-4) SANS 10299-5:2003 (SABS 0299-5) 1.01 1 SANS 10305-1:2005 (SABS 0305-1) SANS 10305-2:2005 (SABS 0305-2) SANS 10305-3:2005 (SABS 0305-3) SANS 10305-4:2005 (SABS 0305-4) 1. maintenance and management of groundwater resources Part 1: The location and siting of water boreholes Development.01 1.01 1. 01 Painting of buildings Part 5: Painting of roofs and steel structures Painting of buildings Part 6: Painting of wood 1.Support documentation and training The manufacture and reconditioning of replacement brake lining assemblies Protection against lightning .01 3 1.01 1.Vehicle-mounted loading equipment Instructions for the use of consumer products Electrical appliances The registration of manufacturers.01 1.01 3 Methods for environmental noise impact assessments The design and construction of sectional steel tanks for storage of liquids at or above ground level Requirements for a Hazard Analysis and Critical Control Point (HACCP) system Translocation of certain species of wild herbivore 1.01 1. O and L motor vehicles and agricultural tractors South African guide to the systematic evaluation of coal resources and coal reserves Surface finishing of architectural aluminium 1.01 1 The management of potable water in distribution systems Cranes. importers and builders of categories M.01 1 1.Physical damage to structures and life hazard Aircraft ground support .01 Industrial rope access Part 1: Worksite procedures Page 192 .01 1.Shot exploder based Structural bearings . N.02 1.01 1 SANS 10322:2005 (SABS 0322) SANS 10324:2007 (SABS 0324) SANS 10325-1:2007 (SABS 0325-1) SANS 10325-2:2007 (SABS 0325-2) SANS 10326:2008 (SABS 0326) SANS 10328:2008 (SABS 0328) SANS 10329:2004 (SABS 0329) SANS 10330:2007 (SABS 0330) SANS 10331:2000 (SABS 0331) SANS 10333-1:2006 (SABS 0333-1) 2 1.The design of bridge bearings 1. lifting and suspended equipment .01 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10305-5:2005 (SABS 0305-5) SANS 10305-6:2005 (SABS 0305-6) SANS 10306:1999 (SABS 0306) SANS 10307:2006 (SABS 0307) SANS 10310:2005 (SABS 0310) SANS 10313:2008 (SABS 0313) SANS 10316:2009 (SABS 0316) SANS 10317:2004 (SABS 0317) SANS 10319:2006 (SABS 0319) SANS 10320:2004 Edition Title 1.01 Inspection and supplemental treatment of treated wood utility poles The safe application of detonator systems for use in mining and civil blasting applications Part 1: Electronic detonator systems The safe application of detonator systems for use in mining and civil blasting applications Part 2: Electric detonator systems . Ed.01 1 Page 193 . maintenance and safe use of overhead monorail transport systems for underground use Homologation of respiratory equipment 1.01 1 Avoidance of hazards underground in collieries due to lightning Fibre-reinforced plastics (FRP) composites Glossary of technical terms Small arms shooting ranges 1 SANS 10353:2003 1 SANS 10354:2007 (SABS 0354) SANS 10356:2005 (SABS 0356) SANS 10357:2004 (SABS 0357) SANS 10359-1:2002/ISO 10359-1:1992.01 2 Underground rail trackwork in mines 1.01 1. 1 1 SANS 10360:2006 (SABS 0360) SANS 10361:2000/ISO 10361:2000.01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10333-2:2006 (SABS 0333-2) SANS 10333-3:2006 (SABS 0333-3) SANS 10335:1999 (SABS 0335) SANS 10338:2009 (SABS 0338) SANS 10339:2006 (SABS 0339) SANS 10340-1:2006 (SABS 0340-1) SANS 10340-2:2006 Edition Title 1.General guidelines Verification of non-automatic electronic selfindicating road vehicle mass measuring equipment for use by road traffic authorities Complaints handling 1 SANS 10341:2009 (SABS 0341) SANS 10343:2003 (SABS 0343) SANS 10346:2007 (SABS 0346) SANS 10347:2002 (SABS 0347) SANS 10349:2004 1.02 1.02 1 SANS 10359-2:2005/ISO 10359-2:1994. IDT. IDT. escalators and passenger conveyors Textile floor coverings .Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers 1.Determination of fluoride Part 2: Determination of inorganically bound total fluoride after digestion and distillation The maintenance and repair of electric and hydraulic powered lifts.01 Industrial rope access Part 2: Training and certification procedures Industrial rope access Part 3: Inspection. Ed.01 Installation of telecommunication cables Part 1: Fibre optic cable in buildings Installation of telecommunication cables Part 2: Outdoor fibre optic cables Installation and maintenance of bearings . Ed. 1 (SABS ISO/TR 10361) 1.01 1 1.Determination of fluoride Part 1: Electrochemical probe method for potable and lightly polluted water Water quality . 1 2 The safe application of underground railway driven and non-driven wheel sets The repair of heavy-duty tubeless and multi-piece steel wheels for off-road vehicles The calculation of sound propagation by the Concawe method Water quality . IDT. certification and management procedures for equipment The installation. Ed. Ed. Ed. IDT.01 1.01 Transport of low-hazard goods in bulk .01 1 SANS 10379:2005 1 SANS 10380:2003 1 Procedures for sampling vegetation according to scale Railway carriages for transporting persons with special needs Part 1: Commuter carriages Railway carriages for transporting persons with special needs Part 2: Long-distance carriages SANS 10383-1:2003 1 SANS 10383-2:2006 1 Page 194 . IDT. IDT. testing and examination of overhead cranes Pressure vessels for human occupancy Part 1: Hyperbaric chambers (therapeutic) General requirements for the competence of verification laboratories in terms of the Trade Metrology Act Zoo and aquarium practice SANS 10377-1:2006 (SABS 0377-1) SANS 10378:2005 1.01 1 SANS 10372:2003 1 Automotive fitment centres SANS 10373-1:2007/ISO/IEC 10373-1:2006. 1 1 SANS 10373-5:2007/ISO/IEC 10373-5:2006.Test methods . 2 2 SANS 10373-3:2004/ISO/IEC 10373-3:2001.Emergency information for road vehicles Non-destructive examination and testing of steel wire rope Road vehicles designed or adapted for use by or transporting persons with disabilities Terms and definitions for clothing 1. Ed. Ed. 2 2 SANS 10375:2006 1 Identification cards . 1 1 SANS 10373-7:2009/ISO/IEC 10373-7:2008. IDT.Test methods Part 1: General characteristics Identification cards . Ed. 2 2 SANS 10373-2:2007/ISO/IEC 10373-2:2006.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10366:2009 Edition Title 2 Health and safety at events . 2 2 SANS 10373-6:2004/ISO/IEC 10373-6:2001.Requirements SANS 10368:2007 (SABS 0368) SANS 10369:2007 (SABS 0369) SANS 10370:2008 (SABS 0370) SANS 10371:2005 1.Part 5: Optical memory cards Identification cards .Test methods Part 2: Cards with magnetic stripes Identification cards . IDT.Test methods Part 3: Integrated circuit(s) cards with contacts and related interface devices Identification cards . IDT.Test methods Part 6: Proximity cards Identification cards .Test methods .Part 7: Vicinity cards The inspection. handling and transportation of non-genetically modified unprocessed agricultural products Requirements for the implementation of an identity preservation system (IP system) Part 2: IP system for the processing and manufacturing industry Requirements for the implementation of an identity preservation system (IP system) Part 3: Sampling and testing protocols The care and use of animals for scientific purposes SANS 10385-2:2007 1 SANS 10385-3:2007 1 SANS 10386:2008 1 SANS 10388:2008 1 The inspection.01 SANS 10407:2006 1. Ed. 1 1 Exterior lighting Part 3: Guide on the limitation of the effects of obtrusive light from outdoor lighting installations The welfare of wild animals transported by sea SANS 10391:2004 1 SANS 10393:2008 1 Hair care products .01 Page 195 .Operational and design requirements and emergency preparedness Transport of dangerous goods . IDT.Requirements for bus operators The application of the National Building Regulations SANS 10397:2003 1 SANS 10399:2003 1 SANS 10400:1990 (SABS 0400) SANS 10403:2003 2 1 Formatting and compilation of construction procurement documents The design and safe use of underground mine rolling stock Transport of dangerous goods by rail .General requirements SANS 10396:2003 1 Implementing preferential construction procurement policies using targeted procurement procedures Environmental considerations for the planning and management of telecommunication structures Quality management systems .The reprocessing of previously certified packaging Thatched roof construction SANS 10404:2007 2 SANS 10405:2009 1 SANS 10406:2007 1. examination and testing of lift trucks SANS 10389-1:2003 1 Exterior lighting Part 1: Artificial lighting of exterior areas for work and safety Exterior lighting Part 2: Exterior security lighting SANS 10389-2:2007 1.01 SANS 10389-3:2004/CIE 150:2003. storage.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10385-1:2005 Edition Title 1 Requirements for the implementation of an identity preservation system (IP system) Part 1: IP system for the production. Contactless integrated circuit(s) cards Part 2: Dimensions and location of coupling areas Identification cards . 1 1 SANS 10594:2007/ISO 10594:2006. Ed. feeders and folders Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses Plastics piping systems for hot and cold water installations . IDT. Ed. 1 1 SANS 10592:2008/ISO 10592:1994. Ed. Ed. 1 1 SANS 10536-3:2004/ISO/IEC 10536-3:1996. 1 1 SANS 10566:2006/ISO 10566:1994. IDT.Hydraulic steering systems SANS 10460:2006/ISO 10460:2005. 2 2 SANS 10472-1:1997/ISO 10472-1:1997. 1 (SABS ISO 10472-5) SANS 10472-6:1997/ISO 10472-6:1997. IDT. IDT. IDT. IDT. Ed. 1 (SABS ISO 10472-6) SANS 10508:2008/ISO 10508:2006. 1 (SABS ISO 10472-4) SANS 10472-5:1997/ISO 10472-5:1997. 2 1 Building materials and products . Ed. 1 (SABS ISO 10472-1) SANS 10472-2:1997/ISO 10472-2:1997. IDT. Ed. IDT.Guidance for classification and design Identification cards . IDT. IDT. Ed. 1 1 Page 196 . Ed. 2 2 SANS 10461:2006/ISO 10461:2005. IDT. IDT. IDT.Welded carbon-steel gas cylinders Periodic inspection and testing Gas cylinders .Seamless aluminium-alloy gas cylinders . Ed. 1 (SABS ISO 10472-3) SANS 10472-4:1997/ISO 10472-4:1997. Ed.Close-coupled cards Part 1: Physical characteristics Identification cards . Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10408:2005 Edition Title 1 Repairs to tyres for motor vehicles SANS 10409:2005 1 Design. Ed. 1 (SABS ISO 10472-2) SANS 10472-3:1997/ISO 10472-3:1997. IDT. Ed. 2 (SABS ISO 10508) 1 1 1 1 1 1 2 SANS 10536-1:2000/ISO/IEC 10536-1:2000.Procedures for determining declared and design thermal values Gas cylinders .Periodic inspection and testing Gas cylinders . 2 1 Micrographics . 2 2 SANS 10462:2006/ISO 10462:2005. IDT. IDT. Ed.Periodic inspection and maintenance Safety requirements for industrial laundry machinery Part 1: Common requirements Safety requirements for industrial laundry machinery Part 2: Washing machines and washer-extractors Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines Safety requirements for industrial laundry machinery Part 4: Air dryers Safety requirements for industrial laundry machinery Part 5: Flatwork ironers. 2 2 (SABS ISO/IEC 10536-1) SANS 10536-2:2004/ISO/IEC 10536-2:1995. IDT. IDT. Ed.Test target for checking performance Explanatory notes on SANS 351 SANS 10657:2005/ISO/TR 10657:1991.Contactless integrated circuit(s) cards . Ed. selection and installation of geomembranes SANS 10456:2007/ISO 10456:1999.Determination of aluminium Spectrometric method using pyrocatechol violet Small craft .Rotary camera systems .Contactless integrated circuit(s) cards Part 3: Electronic signals and reset procedures Water quality . Ed.Transportable cylinders for dissolved acetylene . Ed.Open distributed processing .Detection and enumeration of bacteriophages Part 2: Enumeration of somatic coliphages Water quality . 1 1 SANS 10815-2:2009/ISO 815-2:2008. Ed. Ed. 1 1 1 SANS 10965:1998/ISO 10965:1998. Ed. 1 1 1 Coal preparation plant .Determination of compression set Part 2: At low temperatures Guidelines for the selection of roller chain drives SANS 10815:2003/ISO 815:1991. 1 1 SANS 10746-1:2003/ISO/IEC 10746-1:1998. 1 Edition Title 1 Water quality .Open distributed processing .Detection and enumeration of bacteriophages Part 1: Enumeration of F-specific RNA bacteriophages Water quality . Ed. 1 1 Cranes . IDT.Determination of compression set at ambient. Ed. Ed. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10705-1:2002/ISO 10705-1:1995.Determination of electrical resistance Earth-moving machinery . IDT. IDT. Ed. IDT.Reference model: Architectural semantics Coal sizing equipment . Ed. IDT. 1 (SABS ISO 10752) SANS 10753:2005/ISO 10753:1994. Ed. 1 (SABS ISO 10843) SANS 10957:2009/ISO 10957:1993. Ed. 1 1 SANS 10746-2:2003/ISO/IEC 10746-2:1996. IDT. Ed. 1 1 SANS 10705-4:2005/ISO 10705-4:2001.Assessment of the liability to breakdown in water of materials associated with coal seams Rubber. Ed.Reference model: Architecture Information technology .Open distributed processing .Performance evaluation SANS 10705-2:2002/ISO 10705-2:2000. vulcanized or thermoplastic . 1 1 SANS 10823:2007/ISO 10823:2004. IDT. 1 1 SANS 10746-3:2003/ISO/IEC 10746-3:1996.Operator's controls SANS 10843:1997/ISO 10843:1997. Ed. IDT. Ed.Determination of compression set Part 1: At ambient or elevated temperatures Rubber. IDT.Open distributed processing . IDT.Requirements for mechanisms Part 3: Tower cranes Page 197 . IDT. elevated or low temperatures Rubber. IDT. Ed.Detection and enumeration of bacteriophages Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis Information technology . Ed. MOD. Ed. 1 1 SANS 10746-4:2003/ISO/IEC 10746-4:1998. IDT. IDT. 1 (SABS ISO 10965) SANS 10968:2008/ISO 10968:2004. 1 1 SANS 10752:1994/ISO 10752:1994. vulcanized or thermoplastic .Reference model: Overview Information technology .International standard music number (ISMN) Textile floor coverings . 1 1 Textile floor coverings .Reference model: Foundations Information technology .Methods for the description and physical measurement of single impulses or series of impulses Information and documentation . 2 1 2 SANS 10972-3:2007/ISO 10972-3:2003. IDT.Non-destructive measurement of pile thickness above the backing WRONZ gauge method Acoustics . vulcanized or thermoplastic . IDT. 2 1 SANS 10834:2003/ISO 10834:1992. IDT. 2 1 SANS 10815-1:2009/ISO 815-1:2008. 1 1 SANS 11105:2008/ISO 11105:1997. 1 1 SANS 11137-2:2007/ISO 11137-2:2006. IDT. 2 Edition Title 1 Cranes . Ed. validation and routine control of a sterilization process for medical devices Sterilization of health care products . 1 1 SANS 11137-1:2007/ISO 11137-1:2006. IDT. IDT. 1 1 1 SANS 11043-1:2004/ISO 1043-1:2001. IDT.Radiation Part 2: Establishing the sterilization dose 1 SANS 11135-1:2008/ISO 11135-1:2007. 2 1 SANS 10993-5:2003/ISO 10993-5:1999.Ventilation of petrol engine and/or petrol tank compartments Washing pretreatment of textile fabrics SANS 10993-3:2004/ISO 10993-3:2003. 2 1 SANS 10993-4:2004/ISO 10993-4:2002. Ed.Design.Symbols and abbreviated terms Part 2: Fillers and reinforcing materials Water quality . IDT. Ed. Ed. IDT.Ethylene oxide Part 1: Requirements for development. Ed. IDT. Ed. IDT. 2 1 SANS 11083:2005/ISO 11083:1994.Standards available in electronic format (PDF) October 2009 SANS Number SANS 10973:1995/ISO 10973:1995. carcinogenicity and reproductive toxicity Biological evaluation of medical devices Part 4: Selection of tests for interactions with blood Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity Biological evaluation of medical devices Part 10: Tests for irritation and delayed-type hypersensitivity Biological evaluation of medical devices Part 11: Tests for systemic toxicity Safety data sheet for chemical products Part 1: Content and order of sections Prefilled syringes Part 1: Glass cylinders for dental local anaesthetic cartridges Plastics . Ed. IDT. IDT. 1 1 Page 198 . IDT. 2 2 SANS 11014-1:1994/ISO 11014-1:1994. Ed. IDT.Refillable seamless steel tubes of water capacity between 150 l and 3 000 l . 3 1 SANS 11043-2:2004/ISO 1043-2:2000. 2 1 SANS 11108:2008 (SABS SM 1108) SANS 11120:1999/ISO 11120:1999. 2 1 SANS 10993-11:2008/ISO 10993-11:2006. Ed. validation and routine control of a sterilization process for medical devices Sterilization of health care products . IDT. Ed. 1 (SABS ISO 11014-1) SANS 11040-1:2007/ISO 11040-1:1992.Spare parts manual 1 Biological evaluation of medical devices Part 1: Evaluation and testing Biological evaluation of medical devices Part 3: Test for genotoxicity.Determination of chromium (VI) Spectrometric method using 1. IDT. IDT. 1 3 1 Gas cylinders . IDT.Radiation Part 1: Requirements for development.Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics Plastics . 2 1 SANS 10993-10:2004/ISO 10993-10:2002. IDT. Ed. Ed. Ed. Ed. Ed. Ed. Ed.5-diphenylcarbazide Small craft . 1 (SABS ISO 10973) SANS 10993-1:2003/ISO 10993-1:1997. construction and testing Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 2: Practical guidelines on performance testing of culture media Sterilization of health care products . IDT. 1 (SABS ISO 11120) SANS 11133-2:2004/ISO/TS 11133-2:2003. Ed. 2 (SABS ISO 11138-1) SANS 11138-2:2007/ISO 11138-2:2006. IDT. 1 (SABS ISO 11200) 1 SANS 11201:1995/ISO 11201:1995.Biological indicators Part 2: Biological indicators for ethylene oxide sterilization processes Sterilization of health care products .Measurement of emission sound pressure levels at a work station and at other specified positions .Radiation Part 3: Guidance on dosimetric aspects Sterilization of health care products . IDT. IDT. 2 (SABS ISO 11138-3) SANS 11166:2006 (SABS SM 1166) SANS 11167:2005 (SABS SM 1167) SANS 11169:2003/ISO 11169:1993.Noise emitted by machinery and equipment . Ed.Noise emitted by machinery and equipment .Measurement of emission sound pressure levels at a work station and at other specified positions . Ed. 1 2 2 2 2. 2 (SABS ISO 11138-2) SANS 11138-3:2007/ISO 11138-3:2006.Biological indicators Part 1: General requirements Sterilization of health care products . 1 (SABS ISO 11201) 1 SANS 11202:1995/ISO 11202:1995. Ed. performance test methods and criteria for brake systems Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution Acoustics . Ed. 1 (SABS ISO 11210) SANS 11285:2005/ISO 11285:2004. IDT. 1 (SABS ISO 11203) 1 SANS 11204:1995/ISO 11204:1995. Ed. IDT.04 3 1 SANS 11193-1:2004/ISO 11193-1:2002. Ed.Measurement of emission sound pressure levels at a work station and at other specified positions . IDT. IDT.Method requiring environmental corrections Determination of platinum in platinum jewellery alloys . 1 1 1 SANS 11290-1:1996/ISO 11290-1:1996. IDT.Colour fastness to domestic washing procedures Textiles . IDT. IDT. IDT.Gravimetric method after precipitation of diammonium hexachloroplatinate Milk . Ed. Ed.Wheeled special machines Vocabulary.Dimensional stability during domestic washing and drying procedures Machinery for forestry .Noise emitted by machinery and equipment . 1 (SABS ISO 11204) 1 SANS 11210:1995/ISO 11210:1995. IDT.Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level Acoustics . Ed. Ed. 1 1 SANS 11200:1995/ISO 11200:1995.Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions Acoustics .Survey method in situ Acoustics .Determination of lactulose content . Ed.Noise emitted by machinery and equipment . 1 (SABS ISO 11202) 1 SANS 11203:1995/ISO 11203:1995. 1 (SABS ISO 11290-1) 1 Page 199 .Noise emitted by machinery and equipment .Biological indicators Part 3: Biological indicators for moist heat sterilization processes Textiles . IDT. Ed.Engineering method in an essentially free field over a reflecting plane Acoustics . Ed.Enzymatic method Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of Listeria monocytogenes Part 1: Detection method SANS 11138-1:2007/ISO 11138-1:2006. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 11137-3:2007/ISO 11137-3:2006. 1 Edition Title 1 Sterilization of health care products . IDT. 1 1 SANS 11378-2:2001/ISO 11378-2:2001.Thermal neutron radiographic testing . vulcanized or thermoplastic . Ed. 1 (SABS ISO 11540) SANS 11547:2008/ISO 11547:1994. 1 (SABS ISO 11290-2) Edition Title 1 Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of Listeria monocytogenes Part 2: Enumeration method Rubber . 1 1 SANS 11490:1995/ISO 11490:1995.Start-in-gear protection 1 1 SANS 11431-3:2003/ISO 1431-3:2000. IDT. IDT. IDT.Floor soiling . 3 2 Determination of gold in gold jewellery alloys Cupellation method (fire assay) Determination of silver in silver jewellery alloys Volumetric (potentiometric) method using potassium bromide Rubber. Ed.Estimation of life-time and maximum temperature of use from an Arrhenius plot Textile floor coverings . 3 (SABS ISO 11446) 3 SANS 11462-1:2009/ISO 11462-1:2001.General principles and basic rules Caps for writing and marking instruments intended for use by children up to 14 years of age . IDT. IDT.Determination of low temperature stiffening (Gehman test) Road vehicles . IDT. 1 1 SANS 11540:1993/ISO 11540:1993. Ed. Ed.Test site setup and soiling evaluation Textile floor coverings . Ed. IDT. Ed.Safety requirements Small craft . Ed. 2 (SABS ISO 11426) SANS 11427:1993/ISO 11427:1993.Resistance to ozone cracking Part 1: Static strain test Rubber. 1 1 1 Page 200 . 1 1 1 SANS 11407:2009/ISO 1407:1992. Ed. IDT.Tracked special machines Performance criteria for brake systems Non-destructive testing . Ed. 1 1 SANS 11346:2003/ISO 11346:1997. 1 1 SANS 11377:2003/ISO 11377:1997. vulcanized or thermoplastic . IDT. IDT. Ed. 1 1 1 SANS 11537:2004/ISO 11537:1998. 2 2 SANS 11426:2008/ISO 11426:1997.Resistance to ozone cracking Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers Rubber. Ed. IDT.Determination of solvent extract SANS 11345:2003/ISO 11345:1997. 3 1 SANS 11446:2005/ISO 11446:2004. IDT.Laboratory cleaning procedure using spray extraction Rubber . IDT. 1 (SABS ISO 11427) SANS 11431-1:2003/ISO 1431-1:1989.13-pole connectors for vehicles with 12 V nominal supply voltage Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC Determination of palladium in palladium jewellery alloys . Ed. vulcanized or thermoplastic .Standards available in electronic format (PDF) October 2009 SANS Number SANS 11290-2:1998/ISO 11290-2:1998. Ed.Assessment of carbon black dispersion Rapid comparative methods Rubber. IDT. IDT. Ed.Connectors for the electrical connection of towing and towed vehicles . IDT. 1 (SABS ISO 11490) SANS 11512:2003/ISO 11512:1995. IDT. vulcanized or thermoplastic . Ed. IDT. 1 1 SANS 11432:2003/ISO 1432:1988. 1 (SABS ISO 11378-2) SANS 11379:2003/ISO 11379:1997. Ed. Ed.Laboratory soiling tests Part 2: Drum test Textile floor coverings . Ed.Gravimetric determination with dimethylglyoxime Machinery for forestry . Ed. Standards available in electronic format (PDF) October 2009 SANS Number SANS 11564:2004/EN 1564:1997. Ed. 1 1 SANS 11660-3:2009/ISO 11660-3:2008. 1 1 SANS 11660-1:2009/ISO 11660-1:2008.Presentation of rated capacity charts SANS 11648-2:2005/ISO 11648-2:2001. Ed. Ed. Ed.Access. guards and restraints Part 2: Mobile cranes Cranes . Ed. IDT.Icon symbols and functions Part 3: Pointer icons Small craft.Experimental determination of crane performance Part 1: Tipping loads and radii Page 201 .User system interfaces and symbols . Ed. Ed. IDT. Ed. IDT. sterile barrier systems and packaging systems Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming.Test for adhesion of finish SANS 11648-1:2005/ISO 11648-1:2003. Ed. 1 1 SANS 11630:2007/ISO 11630:1997. guards and restraints Part 3: Tower cranes Mobile cranes . Ed.Austempered ductile cast irons SANS 11581-1:2000/ISO/IEC 11581-1:2000. 1 1 SANS 11644:2009/ISO 11644:1993. IDT. Ed. 2 1 SANS 11623:2006/ISO 11623:2002. Ed. 1 1 Mobile cranes . 1 1 SANS 11607-1:2007/ISO 11607-1:2006. 1 1 SANS 11620:2009/ISO 11620:2008. IDT. 2 2 SANS 11661:2007/ISO 11661:1998. 1 1 Statistical aspects of sampling from bulk materials Part 1: General principles Statistical aspects of sampling from bulk materials Part 2: Sampling of particulate materials Cranes . IDT. IDT. engine-driven . Ed. Ed. 1 Edition Title 1 Founding . Ed. 1 1 SANS 11662-1:2007/ISO 11662-1:1995. 1 1 (SABS ISO/IEC 11581-1) SANS 11581-3:2000/ISO/IEC 11581-3:2000. sealing and assembly processes Information and documentation . IDT. guards and restraints Part 1: General Cranes .Performance and construction Packaging for terminally sterilized medical devices Part 1: Requirements for materials. Ed.Measurement of wheel alignment SANS 11592:2008/ISO 11592:2001. IDT.Icon symbols and functions Part 1: Icons General Information technology .Field of vision from helm position Small craft less than 8 m length of hull Determination of maximum propulsion power rating Wheeled fire extinguishers . IDT.Access. IDT. 2 2 SANS 11660-2:2007/ISO 11660-2:1994. 1 1 SANS 11601:2005/ISO 11601:1999. IDT.Measurement of the mass of a crane and its components Cranes . IDT. 1 1 (SABS ISO/IEC 11581-3) SANS 11591:2008/ISO 11591:2000. Ed. 1 1 Information technology . 1 1 SANS 11629:2007/ISO 11629:2004.Periodic inspection and testing of composite gas cylinders Cranes . Ed. IDT.Access.Library performance indicators Transportable gas cylinders . 1 1 Leather . IDT. IDT. IDT. Ed. IDT. 1 1 SANS 11607-2:2007/ISO 11607-2:2006. Ed.User system interfaces and symbols . IDT. MOD. Ed. 1 1 SANS 11770-2:2008/ISO/IEC 11770-2:2008. IDT. IDT. 2 2 Information technology . IDT. IDT. 1 1 SANS 11732:2006/ISO 11732:2005.Pedestal plain bearings Part 2: Side flange bearings Plain bearings . 1 1 SANS 11688-1:1995/ISO/TR 11688-1:1995.Security techniques .Industrial radiographic films Part 2: Control of film processing by means of reference values Solid mineral fuels . 1 1 SANS 11687-3:2005/ISO 11687-3:1995.Standards available in electronic format (PDF) October 2009 SANS Number SANS 11687-1:2005/ISO 11687-1:1995. 1 1 SANS 11731:2008/ISO 11731:1998. Ed.Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts Water quality . IDT.Security techniques .Recommended practice for the design of low-noise machinery and equipment Part 1: Planning Acoustics . Ed. IDT. Ed.Determination of total fluorine in coal. IDT.Method by flow analysis (CFA and FIA) and spectrometric detection Classification of coals SANS 11687-2:2005/ISO 11687-2:1995. Ed. 1 2 1 SANS 11770-1:2004/ISO/IEC 11770-1:1996. Ed. Ed.Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms Non-destructive testing . Ed.Key management Part 1: Framework Information Technology . 1 (SABS ISO/TR 11690-3) SANS 11699-1:2005/ISO 11699-1:1998.Determination of moisture in the general analysis test sample by drying in nitrogen Solid mineral fuels . 1 (SABS ISO/TR 11688-1) SANS 11688-2:1998/ISO/TR 11688-2:1998. 1 1 SANS 11722:2005/ISO 11722:1999. Ed.Pedestal plain bearings Part 1: Pillow blocks Plain bearings .Pedestal plain bearings Part 3: Centre flange bearings Acoustics . Ed. Ed. coke and fly ash Water quality . Ed.Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies Acoustics . 1 1 1 1 1 1 1 SANS 11699-2:2005/ISO 11699-2:1998. 1 (SABS ISO/TR 11688-2) SANS 11690-1:1996/ISO 11690-1:1996. IDT.Industrial radiographic films Part 1: Classification of film systems for industrial radiography Non-destructive testing . IDT. 1 (SABS ISO 11690-2) SANS 11690-3:1997/ISO/TR 11690-3:1997. IDT.Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design Acoustics . IDT. IDT. Ed.Detection and enumeration of Legionella Water quality . 1 Edition Title 1 Plain bearings . Ed. IDT. Ed. IDT. IDT. 2 (SABS ISO 11732) SANS 11760:2007/ISO 11760:2005. Ed.Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures Acoustics . IDT. 1 (SABS ISO 11690-1) SANS 11690-2:1996/ISO 11690-2:1996. Ed. IDT. 1 1 SANS 11724:2007/ISO 11724:2004. IDT.Key management Part 2: Mechanisms using symmetric techniques Page 202 . 1 1 SANS 11731-2:2009/ISO 11731-2:2004.Hard coal . Ed.Determination of ammonium nitrogen . Measurement of resistivity Textile floor coverings .01 (SABS ISO/IEC 11801) SANS 11812:2008/ISO 11812:2001. Ed. vulcanized .Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology . Ed. Ed.Self-propelled machinery Safety requirements Conducting and dissipative rubbers. 2 1 SANS 11853:2003/ISO 1853:1998. IDT.Determination of fat content . IDT. Ed. IDT. 1 (SABS ISO 11857) SANS 11870:2005/ISO 11870:2000. IDT. Ed.Determination of resistance to delamination Milk and milk products . 1 1 SANS 11843-5:2009/ISO 11843-5:2008. 2 (SABS ISO 11885) SANS 11890-1:2004/ISO 11890-1:2000. printing and copying on paper Requirements and test methods Information and documentation .Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) Paints and varnishes . Ed. 2. 1 1 SANS 11801:2008/ISO/IEC 11801:2008.Key management Part 3: Mechanisms using asymmetric techniques Information technology . Ed. IDT. 4 1 SANS 11843-1:2009/ISO 11843-1:1997. Ed. 1 1 SANS 11770-4:2007/ISO/IEC 11770-4:2006. Ed. IDT. IDT. 1 1 Capability of detection Part 2: Methodology in the linear calibration case Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value Capability of detection Part 5: Methodology in the linear and non-linear calibration cases Machinery for forestry . IDT. IDT. 1 2 1 Page 203 . Ed.Determination of volatile organic compound (VOC) content Part 1: Difference method SANS 11843-3:2009/ISO 11843-3:2003. 1 1 1 SANS 11885:2008/ISO 11885:2007. 3 1 SANS 11820:2008/ISO 1182:2002. IDT.Generic cabling for customer premises Small craft . Ed. 1 SANS 11798:2006/ISO 11798:1999. Ed.Document storage requirements for archive and library materials Information technology .Permanence and durability of writing. 1 1 SANS 11817:2003/ISO 1817:1999.Security techniques . IDT. IDT. IDT. IDT.Key management Part 4: Mechanisms based on weak secrets Information and documentation . Ed.1 2. Ed. Ed.General guidance on the use of butyrometric methods Water quality . IDT.Watertight cockpits and quick-draining cockpits Rubber. 1 1 SANS 11843-4:2009/ISO 11843-4:2003. IDT. Ed.Security techniques . IDT. Ed. 1 1 SANS 11850:2003/ISO 11850:2003. Ed. IDT. Ed. 2 1 SANS 11857:1999/ISO 11857:1999. 1 1 1 SANS 11799:2005/ISO 11799:2003.Determination of the effect of liquids Reaction to fire tests for building products . 1 1 SANS 11843-2:2009/ISO 11843-2:2000.Noncombustibility test Capability of detection Part 1: Terms and definitions SANS 11770-3:2004/ISO/IEC 11770-3:1999. vulcanized or thermoplastic . IDT. Ed.Chamfer dimensions for outer ring nonthrust side Road vehicles . 1 1 SANS 12044:2006/ISO 12044:1995. IDT.Guide pillar mountings SANS 11903:2006/ISO 11903:1996. IDT. Ed. Ed. 2 (SABS EN 12173) SANS 12174:2007/EN 12174:2006.Single-row angular contact ball bearings . IDT. Ed. IDT. 1 2 2 2 1 Page 204 . Ed. Ed.Vocabulary 1 SANS 12004:1997/ISO 12004:1997.15-pole connector for vehicles with 24 V nominal supply voltage Plastics piping systems . IDT. Ed. IDT. Ed. 1 Edition Title 1 Paints and varnishes . IDT.Sodium hexafluorosilicate Chemicals used for treatment of water intended for human consumption . 1 1 SANS 12170:2004/ISO 12170:1996.Forms design optimization for electronic image management Rolling bearings . Ed.Media error monitoring and reporting techniques for verification of stored data on optical digital data disks Gas welding equipment . types.Lubrication holes. IDT.Hexafluorosilicic acid Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet SANS 12142:2006/ISO 12142:2001. IDT.Availability .Thermoplastic hoses for welding and allied processes Chemicals used for treatment of water intended for human consumption . 1 1 Thermoplastics pipes for the conveyance of fluids Dimensions and tolerances Part 1: Metric series Cranes . 2 (SABS ISO 12098) 2 SANS 12107:2003/EN 12107:1997. flanges and thrust collars Electronic imaging . designation and their application to bearing bushes Plain bearings Part 1: Fits 1 SANS 12043:2006/ISO 12043:1995.Sodium fluoride Chemicals used for treatment of water intended for human consumption . Ed. Ed.Connectors for the electrical connection of towing and towed vehicles . 2 1 Metallic materials . Ed. 1 (SABS ISO 11922-1) SANS 11994:2008/ISO 11994:1997.Dimensions. 1 (SABS ISO 12004) SANS 12029:2007/ISO/TS 12029:2007.Chamfer dimensions for loose rib and non-rib sides Rolling bearings . Ed. 2 (SABS EN 12174) SANS 12175:2007/EN 12175:2006. 1 1 SANS 12129-2:2006/ISO 12129-2:1995. IDT.Determination of volatile organic compound (VOC) content Part 2: Gaschromatographic method Tools for pressing .Single-row cylindrical roller bearings .Injection-moulded thermoplastics fittings. IDT. Ed. 1 1 SANS 11922-1:1997/ISO 11922-1:1997. Ed. Ed.Guidelines for the determination of forming-limit diagrams Electronic imaging . 1 1 SANS 12173:2007/EN 12173:2005.Standards available in electronic format (PDF) October 2009 SANS Number SANS 11890-2:2004/ISO 11890-2:2000. Ed. 1 1 SANS 12098:2005/ISO 12098:2004. 2 (SABS EN 12175) SANS 12199:2008/ISO 12199:2000. 1 1 SANS 12128:2006/ISO 12128:2001. IDT.Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components Plain bearings . grooves and pockets . 2 1 SANS 12129-1:2006/ISO 12129-1:1995. IDT. valves and ancillary equipment . IDT. Ed. 1 1 Plain bearings Part 2: Tolerances on form and position and surface roughness for shafts. Ed. IDT. IDT. IDT. IDT. IDT. IDT.Hull construction and scantlings Part 1: Materials: Thermosetting resins. 1 1 SANS 12240-2:2006/ISO 12240-2:1998. Ed.Hull construction and scantlings Part 3: Materials: Steel.Thermoplastics pipes and fittings for hot and cold water . IDT.Requirements for copy paper for dry toner imaging processes Plastics piping systems .Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6m Spherical plain bearings Part 1: Radial spherical plain bearings Spherical plain bearings Part 2: Angular contact radial spherical plain bearings Spherical plain bearings Part 3: Thrust spherical plain bearings Spherical plain bearings Part 4: Spherical plain bearing rod ends Mountaineering equipment . Ed. Ed. IDT. IDT. Ed. Ed. 1 1 SANS 12216:2008/ISO 12216:2002. Ed. IDT. 1 (SABS EN 12293) 1 Page 205 .Windows. 1 (SABS EN 12277) SANS 12281:2005/EN 12281:2002. hatches. Ed. other materials Small craft . 1 1 SANS 12240-1:2005/ISO 12240-1:1998. Ed. 1 1 1 SANS 12293:1999/EN 12293:1999. aluminium alloys. 1 1 SANS 12277:1998/EN 12277:1998. IDT. IDT. portlights. reference laminate Small craft . IDT. Ed.Hull construction and scantlings Part 6: Structural arrangements and details Small craft .Standards available in electronic format (PDF) October 2009 SANS Number SANS 12200:2008/ISO 12200:1999. embedded materials Small craft . Ed. Ed. Ed.Strength and watertightness requirements Small craft . 1 1 SANS 12240-3:2005/ISO 12240-3:1998. IDT. 1 Edition Title 1 Computer applications in terminology . Ed. 1 1 SANS 12215-4:2008/ISO 12215-4:2002. wood. IDT. 1 1 SANS 12215-5:2009/ISO 12215-5:2008. IDT.Hull construction and scantlings Part 2: Materials: Core materials for sandwich construction. Ed. design stresses. IDT. Ed.Harnesses . 1 2 1 SANS 12215-2:2008/ISO 12215-2:2002. IDT.Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 m Small craft . 1 1 SANS 12217-2:2008/ISO 12217-2:2002. IDT.Test method for the resistance of mounted assemblies to temperature cycling SANS 12207:2008/ISO/IEC 12207:2008. IDT.Machinereadable terminology interchange format (MARTIF) Negotiated interchange Systems and software engineering .Safety requirements and test methods Printing and business paper . 1 1 SANS 12215-6:2009/ISO 12215-6:2008. 1 1 SANS 12240-4:2005/ISO 12240-4:1998. 1 1 SANS 12215-3:2008/ISO 12215-3:2002.Hull construction and scantlings Part 5: Design pressures for monohulls. Ed. IDT.Software life cycle processes Small craft . IDT. IDT. glass-fibre reinforcement. Ed. scantlings determination Small craft .Hull construction and scantlings Part 4: Workshop and manufacturing Small craft . 2 (SABS ISO/IEC 12207) SANS 12215-1:2008/ISO 12215-1:2000. IDT. deadlights and doors . Ed. 1 1 SANS 12217-3:2008/ISO 12217-3:2002.Stability and buoyancy assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m Small craft . 1 1 SANS 12217-1:2008/ISO 12217-1:2002. Ed. 1 1 SANS 12402-7:2007/ISO 12402-7:2006. performance level 275 .Safety requirements and test methods Personal flotation devices Part 1: Lifejackets for seagoing ships . 1 1 SANS 12353:2008/EN 12353:2006. IDT.Quality control techniques and inspection of geometrical and material quality characteristics Plain bearings . 1 1 SANS 12402-2:2007/ISO 12402-2:2006. applications and testing Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal. sporicidal and fungicidal activity Small craft . Ed. Ed. 1 1 SANS 12402-1:2007/ISO 12402-1:2005. Ed. performance level 150 .Safety requirements Personal flotation devices Part 3: Lifejackets.Safety requirements Personal flotation devices Part 5: Buoyancy aids (level 50) .Safety requirements Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids . Ed. IDT. 1 1 SANS 12402-8:2007/ISO 12402-8:2006. IDT. Ed. 1 1 SANS 12308:2005/ISO 12308:1994. Ed. IDT. IDT.Performance criteria for microbiological safety cabinets SANS 12469:2002/EN 12469:2000. 1 1 SANS 12402-3:2007/ISO 12402-3:2006. IDT. Ed. Ed.Test method for leaktightness under vacuum Plastics piping systems . IDT. IDT. mycobactericidal. Ed.Deck safety harness and safety line for use on recreational craft . Ed. Ed.Statistical process control (SPC) Plain bearings . Ed. 1 1 SANS 12306:2005/ISO 12306:1994. IDT. IDT. 1 1 SANS 12402-6:2007/ISO 12402-6:2006.Test method for resistance of joints to pressure cycling Plain bearings .Safety requirements Personal flotation devices Part 2: Lifejackets. 1 1 SANS 12402-9:2007/ISO 12402-9:2006. Ed. 2 (SABS EN 12353) 2 SANS 12401:2008/ISO 12401:2004. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 12294:1999/EN 12294:1999. IDT. IDT. Ed. Ed.Sample types Definitions. 1 1 SANS 12307-1:2006/ISO 12307-1:1994. IDT. IDT.Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes Plain bearings . 1 (SABS EN 12295) SANS 12301:2005/ISO 12301:1992. 1 1 SANS 12402-5:2007/ISO 12402-5:2006. Ed.Safety requirements Personal flotation devices Part 4: Lifejackets. Ed. performance level 100 . IDT.Safety requirements and test methods Personal flotation devices Part 8: Accessories Safety requirements and test methods Personal flotation devices Part 9: Test methods 1 1 SANS 12302:2005/ISO 12302:1993.Wrapped bushes Part 1: Checking the outside diameter Plain bearings . IDT. IDT. 1 1 Page 206 . Ed. IDT. 1 (SABS EN 12294) SANS 12295:1999/EN 12295:1999.Quality characteristics .Thermoplastics pipes and associated fittings for hot and cold water . 1 1 SANS 12402-10:2007/ISO 12402-10:2006.Systems for hot and cold water . 1 1 SANS 12402-4:2007/ISO 12402-4:2006.Safety requirements and additional test methods Personal flotation devices Part 7: Materials and components . Ed.Quality assurance . 1 Edition Title 1 Plastics piping systems . 1 1 Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices Biotechnology . Ed. 1 1 SANS 12902:2007/ISO/TS 12902:2001.Test target for the black-andwhite scanning of office documents Part 2: Method of use Non-destructive testing . Ed.Data categories Electronic imaging . Ed. 1 1 SANS 12710:2003/ISO 12710:2002.Determination of beam L/D ratio Drawing and writing instruments .Vocabulary Non-destructive testing .Maintenance manual Part 1: General SANS 12480-1:2006/ISO 12480-1:1997. Ed. 1 1 SANS 12716:2004/ISO 12716:2001. Ed. IDT. 1 1 Page 207 . 1 1 SANS 12756:2009/ISO 12756:1998. Ed. Ed.Health and safety practices in occupational settings relevant to nanotechnologies Solid mineral fuels .Vocabulary Nanotechnologies . 1 1 Cranes . Ed.Safe use Part 1: General SANS 12480-3:2007/ISO 12480-3:2005. 1 1 SANS 12620:2008/ISO 12620:1999. signalling and marking lights. IDT. Ed. Ed. 1 1 Cranes . IDT. Ed. 2 2 SANS 12615:2008/ISO 12615:2004. 1 1 SANS 12653-1:2006/ISO 12653-1:2000. IDT. IDT. hydrogen and nitrogen .Reference blocks and test procedures for the characterization of contact search unit beam profiles Non-destructive testing . IDT. Ed. 1 1 SANS 12721:2004/ISO 12721:2000. 1 1 SANS 12885:2009/ISO/TR 12885:2008. Ed. 1 1 Computer applications in terminology .Stability requirements SANS 12488-1:2007/ISO 12488-1:2005.Tolerances for wheels and travel and traversing tracks Part 1: General Earth-moving machinery . Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 12478-1:2006/ISO 12478-1:1997. IDT. IDT. IDT. 1 Edition Title 1 Cranes . 1 1 Cranes .Acoustic emission inspection . IDT. Ed.Condition monitoring Part 1: General SANS 12485:2007/ISO 12485:1998.Ultrasonic inspection Evaluating electronic characteristics of ultrasonic test instruments Ultrasonic non-destructive testing . IDT. IDT. IDT. IDT. 1 1 Tower cranes . 1 1 SANS 12715:2004/ISO 12715:1999.Lighting.Test target for the black-andwhite scanning of office documents Part 1: Characteristics Electronic imaging . 1 1 SANS 12616:2004/ISO 12616:2002. Ed.Instrumental methods SANS 12653-2:2006/ISO 12653-2:2000. IDT. and reflex-reflector devices Bibliographic references and source identifiers for terminology work Translation-oriented terminography SANS 12509:2008/ISO 12509:2004. Ed. IDT. IDT.Ball point pens and roller ball pens . Ed. Ed. Ed. 1 1 Electronic imaging .Determination of total carbon.Vocabulary SANS 12651:2005/ISO 12651:1999.Thermal neutron radiographic testing . IDT. IDT.Safe use Part 3: Tower cranes SANS 12482-1:2008/ISO 12482-1:1995. Ed. 1 1 Cranes . IDT. IDT. characteristics and marking Cranes . 1 (SABS ISO 12944-6) SANS 12944-7:1998/ISO 12944-7:1998. IDT.Power assisted filtering devices incorporating full face masks. IDT. 1 (SABS ISO 12944-3) SANS 12944-4:1998/ISO 12944-4:1998.Alternating current installations Sensory analysis .Standards available in electronic format (PDF) October 2009 SANS Number SANS 12941:1998/EN 12941:1998. IDT. 1 (SABS ISO 12944-1) SANS 12944-2:1998/ISO 12944-2:1998. testing. half masks or quarter masks . 1 (SABS ISO 12944-8) 1 1 1 1 1 1 1 1 SANS 12951:2004/ISO 12951:1999. IDT. IDT. IDT. Ed. Ed. Ed.Security techniques Management of information and communications technology security Part 1: Concepts and models for information and communications technology security management 1 SANS 12944-1:1998/ISO 12944-1:1998.Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods Paints and varnishes . 1 (SABS ISO 12944-4) SANS 12944-5:1998/ISO 12944-5:1998. IDT. Ed. IDT. Ed.Corrosion protection of steel structures by protective paint systems Part 3: Design considerations Paints and varnishes .Powered filtering devices incorporating a helmet or a hood Requirements. Ed. 1 1 Page 208 .Corrosion protection of steel structures by protective paint systems Part 7: Execution and supervision of paint work Paints and varnishes . IDT. 1 (SABS ISO 12944-5) SANS 12944-6:1998/ISO 12944-6:1998. IDT. Ed.Corrosion protection of steel structures by protective paint systems Part 4: Types of surface and surface preparation Paints and varnishes . Ed. IDT. IDT. Ed. Ed. Ed.Definitions. Ed. classification. testing.Electrical systems . 1 (SABS ISO 12944-7) SANS 12944-8:1998/ISO 12944-8:1998. IDT. 1 1 SANS 13006:2003/ISO 13006:1998. Ed.Corrosion protection of steel structures by protective paint systems Part 2: Classification of environments Paints and varnishes . 1 1 SANS 13335-1:2005/ISO/IEC 13335-1:2004. IDT.Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems Paints and varnishes . 1 (SABS EN 12941) SANS 12942:1998/EN 12942:1998. Ed. 1 1 SANS 13202:2007/ISO 13202:2003. 1 1 SANS 13297:2008/ISO 13297:2000.Measurement of velocity and time parameters Chains.Corrosion protection of steel structures by protective paint systems Part 1: General introduction Paints and varnishes .Determination of mass loss using the Lisson test Ceramic tiles . Ed. marking Paints and varnishes .Corrosion protection of steel structures by protective paint systems Part 8: Development of specifications for new work and maintenance Textile floor coverings . IDT.List of equivalent terms Ducted air-conditioners and air-to-air heat pumps Testing and rating for performance Small craft . Ed. Ed.Methods for assessing modifications to the flavour of foodstuffs due to packaging Information technology . Ed.Requirements. marking Respiratory protective devices . sprockets and accessories . 1 (SABS ISO 12944-2) SANS 12944-3:1998/ISO 12944-3:1998. 1 1 SANS 13253:2003/ISO 13253:1995. IDT. 1 1 SANS 13203:2007/ISO 13203:2005. 2 1 SANS 13302:2008/ISO 13302:2003. IDT. 1 (SABS EN 12942) Edition Title 1 Respiratory protective devices . Generic coding of moving pictures and associated audio information: Systems SANS 13746:2000/ISO 13746:2000. Ed. 1 Ed.Quality management systems Requirements for regulatory purposes Statistical methods for use in proficiency testing by interlaboratory comparisons Single side loading fork-lift trucks Part 1: Stability tests Single side loading fork-lift trucks Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above Small craft .Guidelines for installation and use on stairs Plastics pipes for the conveyance of fluids under pressure . Ed. Ed. 2 1 SANS 13591:2008/ISO 13591:1997. 1 SANS 13335-4:2002/ISO/IEC TR 13335-4:2000. Ed.Construction and system installation requirements Small craft .Packaged reciprocating gas compressors Textile floor coverings . 1 SANS 13342:2008/ISO 13342:1995. 1 1 Petroleum and natural gas industries . Ed. Ed. IDT. 1 SANS 13335-5:2002/ISO/IEC TR 13335-5:2001. Ed.Backfire flame control for petrol engines SANS 13335-3:2002/ISO/IEC TR 13335-3:1998. IDT. IDT. Ed. Ed. IDT. Ed. 2 1 1 SANS 13528:2009/ISO 13528:2005. IDT.Guidelines for the management of IT security Part 3: Techniques for the management of IT Security Information technology . 2 1 1 SANS 13474:2005/ISO/TS 13474:2003.Calculation method for cumulative damage Information technology .Guidelines for the management of IT security Part 4: Selection of safeguards Information technology . Ed. IDT. Ed.Static thrust measurement for outboard motors Water quality . Ed. 3 3 (SABS ISO/IEC 13818-1) Page 209 . IDT. 1 1 SANS 13563-1:2007/ISO 13563-1:2001. IDT. IDT. IDT. 1 Ed. Ed. IDT. IDT. 1 (SABS ISO 13395) SANS 13425:2005/ISO/TR 13425:2003. Ed.Portable fuel systems for outboard motors Small craft . 1 1 SANS 13563-2:2007/ISO 13563-2:2001. 1 (SABS ISO 13475-1) SANS 13485:2004/ISO 13485:2003.Guidelines for the management of IT security Part 5: Management guidance on network security Small craft . 1 Ed. IDT.Personal watercraft . IDT. 1 (SABS ISO 13760) 1 1 SANS 13818-1:2008/ISO/IEC 13818-1:2007.Miner's rule . 1 1 SANS 13395:1996/ISO 13395:1996. IDT.Impulse sound propagation for environmental noise assessment Acoustics . IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology . Ed. IDT.Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection Guidelines for the selection of statistical methods in standardization and specification Acoustics . 1 (SABS ISO 13746) SANS 13760:1998/ISO 13760:1998. 1 1 SANS 13590:2008/ISO 13590:2003. 1 1 SANS 13631:2003/ISO 13631:2002. 1 1 SANS 13592:2008/ISO 13592:1998. 1 1 SANS 13475-1:1999/ISO 13475-1:1999. IDT. IDT.Stationary audible warning devices used outdoors Part 1: Field measurements for determination of sound emission quantities Medical devices . 1 1 SANS 13937-4:2007/ISO 13937-4:2000. IDT. IDT. Ed. IDT. 1 1 Textiles .Security techniques . 1 1 1 1 1 1 1 1 1 1 SANS 13934-1:1999/ISO 13934-1:1999. Ed.Tensile properties of fabrics Part 2: Determination of maximum force using the grab method Textiles .Guidance on validation of microbiological methods IT security techniques .Mechanical sampling Part 8: Methods of testing for bias Small craft .Sampling from stationary lots Hard coal and coke . Ed. Ed. Ed. Ed. Ed. IDT.Mechanical sampling Part 3: Coal .Mechanical sampling Part 6: Coke . 1 (SABS ISO 13909-3) SANS 13909-4:2002/ISO 13909-4:2001. 1 1 Page 210 .Security techniques . Ed. IDT.Tear properties of fabrics Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) 1 SANS 13937-3:2007/ISO 13937-3:2000. IDT. IDT.Sampling from moving streams Hard coal and coke .Mechanical sampling Part 1: General introduction Hard coal and coke . 1 (SABS ISO 13909-4) SANS 13909-5:2001/ISO 13909-5:2001. 1 (SABS ISO 13934-1) SANS 13934-2:2008/ISO 13934-2:1999. 1 (SABS ISO 13909-1) SANS 13909-2:2001/ISO 13909-2:2001.Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles .Nonrepudiation Part 3: Mechanisms using asymmetric techniques Hard coal and coke . Ed. 1 1 SANS 13888-3:2004/ISO/IEC 13888-3:1997. IDT.Mechanical sampling Part 4: Coal . Ed. sample preparation and testing Hard coal and coke . IDT. IDT. 1 (SABS ISO 13909-7) SANS 13909-8:2001/ISO 13909-8:2001. 1 2 SANS 13888-2:2004/ISO/IEC 13888-2:1998. IDT. 1 1 SANS 13888-1:2005/ISO/IEC 13888-1:2004. Ed.Preparation of test samples Hard coal and coke . Ed.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology . Ed. IDT.Generic coding of moving pictures and associated audio information Part 3: Audio Water quality . IDT. IDT.Nonrepudiation Part 2: Mechanisms using symmetric techniques Information technology .Mechanical sampling Part 7: Methods for determining the precision of sampling. IDT.Steering gear . 1 (SABS ISO 13909-5) SANS 13909-6:2001/ISO 13909-6:2001. Ed. Ed.Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method Textiles .Non-repudiation Part 1: General Information technology .Preparation of test samples Hard coal and coke . 2 2 (SABS ISO/IEC 13818-3) SANS 13843:2004/ISO/TR 13843:2000. 2 2 (SABS ISO/IEC 13818-2) SANS 13818-3:1998/ISO/IEC 13818-3:1998.Geared link systems SANS 13818-2:2003/ISO/IEC 13818-2:2000.Mechanical sampling Part 2: Coal .Sampling from moving streams Hard coal and coke .Mechanical sampling Part 5: Coke . IDT. IDT. 1 (SABS ISO 13909-2) SANS 13909-3:2002/ISO 13909-3:2001. IDT. Ed. 1 1 SANS 13909-1:2001/ISO 13909-1:2001. 1 (SABS ISO 13909-6) SANS 13909-7:2001/ISO 13909-7:2001. Ed. Ed. Ed. IDT. 1 (SABS ISO 13909-8) SANS 13929:2008/ISO 13929:2001.Generic coding of moving pictures and associated audio information: Video Information technology . Principles and procedures Environmental management . IDT.Examples of application of ISO 14041 to goal and scope definition and inventory analysis Environmental management . Ed. IDT. IDT.Requirements and guidelines Environmental management .Life cycle assessment .Goal and scope definition and inventory analysis Environmental management . Ed. IDT. Ed. 1 1 SANS 14050:2009/ISO 14050:2009. Ed. Ed. IDT. 1 (SABS ISO 14024) SANS 14025:2006/ISO 14025:2006. Ed. 1 Edition Title 1 Textiles . IDT. Ed.Type I environmental labelling .General guidelines on principles. IDT. IDT. 1 3 1 Environmental management . 1 (SABS ISO 14042) SANS 14043:2000/ISO 14043:2000. 2 (SABS ISO 14040) SANS 14041:1998/ISO 14041:1998.Integrating environmental aspects into product design and development Page 211 . 3 (SABS ISO 14050) SANS 14062:2005/ISO/TR 14062:2002. Ed.Environmental performance evaluation .Principles and procedures Environmental labels and declarations .Determination of ozone in ambient air Ultraviolet photometric method Environmental management systems Requirements with guidance for use Environmental management systems .Type III environmental declarations . Ed. 1 (SABS ISO 14041) SANS 14042:2000/ISO 14042:2000. 2 (SABS ISO 14001) SANS 14004:2005/ISO 14004:2004.Standards available in electronic format (PDF) October 2009 SANS Number SANS 13938-1:1999/ISO 13938-1:1999. IDT.Environmental assessment of sites and organizations (EASO) Environmental labels and declarations . IDT. Ed.Life cycle assessment . Ed.General principles Environmental labels and declarations . 1 2 1 1 1 SANS 14031:1999/ISO 14031:1999. 1 1 SANS 14048:2003/ISO/TS 14048:2002.Life cycle assessment .Life cycle interpretation Environmental management . 1 (SABS ISO 14043) SANS 14044:2006/ISO 14044:2006. 1 1 SANS 14049:2003/ISO/TR 14049:2000. IDT.Guidelines Environmental management . 1 (SABS ISO 13938-1) SANS 13964:2004/ISO 13964:1998.Data documentation format Environmental management . 2 (SABS ISO 14020) SANS 14021:1999/ISO 14021:1999. Ed.Selfdeclared environmental claims (Type II environmental labelling) Environmental labels and declarations . IDT.Life cycle assessment . IDT. 1 (SABS ISO 14031) SANS 14040:2006/ISO 14040:2006. Ed.Life cycle impact assessment . Ed. IDT.Life cycle assessment .Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Air quality . IDT. Ed.Vocabulary 1 SANS 14001:2005/ISO 14001:2004. IDT. IDT. Ed. 1 2 2 1 SANS 14020:2003/ISO 14020:2000.Examples of application of SANS 14042 Environmental management . systems and support techniques Environmental management . Ed. Ed.Life cycle assessment .Life cycle assessment .Life cycle impact assessment Environmental management . 2 (SABS ISO 14004) SANS 14015:2003/ISO 14015:2001.Principles and framework Environmental management . Ed. 1 1 2 1 1 1 1 SANS 14047:2005/ISO/TR 14047:2003. IDT. IDT. 1 (SABS ISO 14021) SANS 14024:1999/ISO 14024:1999. IDT. Ed. monitoring and reporting of greenhouse gas emission. IDT.Software measurement Functional size measurement Part 6: Guide for use of ISO/IEC 14143 series and related international standards Safety of machinery . IDT. Ed. 1 1 SANS 14143-3:2004/ISO/IEC TR 14143-3:2003. 1 (SABS ISO 14180) SANS 14227:2008/ISO 14227:2001.Software measurement Functional size measurement Part 1: Definition of concepts Information Technology . 1 1 SANS 14064-3:2006/ISO 14064-3:2006.Environmental communication . IDT. IDT. Ed. IDT. IDT.Guidelines and examples Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals Greenhouse gases Part 2: Specification with guidance at the project level for quantification. IDT. IDT. Ed. IDT. 1 1 SANS 14180:1998/ISO 14180:1998. Ed.Software measurement Functional size measurement Part 5: Determination of functional domains for use with functional size measurement Information technology . IDT.Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar Information technology . IDT. 1 1 SANS 14159:2006/ISO 14159:2002.Software measurement Functional size measurement Part 4: Reference model Information technology . IDT. reductions or removal enhancements Greenhouse gases Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions Greenhouse gases . Ed. IDT. 1 1 SANS 14102:2009/ISO/IEC 14102:2008.Hygiene requirements for the design of machinery Solid mineral fuels .Guideline for the evaluation and selection of CASE tools Gas welding equipment . IDT. Ed. Ed. 2 2 (SABS ISO/IEC 14143-1) SANS 14143-2:2003/ISO/IEC 14143-2:2002. Ed. 1 1 SANS 14065:2007/ISO 14065:2007.Software measurement Functional size measurement Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998 Information technology .Magnetic compasses SANS 14064-1:2006/ISO 14064-1:2006. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 14063:2006/ISO 14063:2006.Software measurement Functional size measurement Part 3: Verification of functional size measurement methods Information Technology .Guidance on the sampling of coal seams Small craft . IDT. IDT. IDT. 1 SANS 14143-6:2009/ISO/IEC 14143-6:2006. Ed. 1 1 SANS 14064-2:2006/ISO 14064-2:2006. 1 SANS 14143-5:2004/ISO/IEC TR 14143-5:2004. 1 1 1 SANS 14236:2003/ISO 14236:2000. Ed. 1 2 1 SANS 14143-1:2008/ISO/IEC 14143-1:2007. 1 1 Plastics pipes and fittings . 1 Ed. Ed. 1 Ed. 1 SANS 14143-4:2003/ISO/IEC TR 14143-4:2002.Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems Page 212 . 1 Ed. Ed. 1 Edition Title 1 Environmental management . Ed. 2 (SABS ISO/IEC 14102) SANS 14113:2004/ISO 14113:1997.Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition Information technology . 1 1 SANS 14471:2009/ISO/IEC TR 14471:2007. serials and other paper documents for archive and library use Methods and materials Identification cards . Ed. Ed. Ed.Proximity cards Part 3: Initialization and anticollision Identification cards . IDT.Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels .Physical properties and system design Part 1: General requirements Gaseous fire-extinguishing systems . Ed. 2 (SABS ISO 14520-8) 2 2 Page 213 . 1 2 Gaseous fire-extinguishing systems . IDT.Proximity cards Part 2: Radio frequency power and signal interface Identification cards . 1 1 SANS 14516:2003/ISO/IEC TR 14516:2002.Measurement of airborne sound emitted by powered recreational craft Small craft . 1 1 SANS 14520-1:2008/ISO 14520-1:2006. IDT. 1 1 (SABS ISO/IEC 14443-1) SANS 14443-2:2004/ISO/IEC 14443-2:2001. IDT. 1 Edition Title 1 Welding consumables . 1 1 SANS 14509-1:2009/ISO 14509-1:2008. 1 1 SANS 14443-4:2004/ISO/IEC 14443-4:2001. IDT. IDT. IDT. 1 1 SANS 14443-1:2000/ISO/IEC 14443-1:2000.Security techniques Guidelines for the use and management of Trusted Third Party services Cranes . 2 (SABS ISO 14520-1) SANS 14520-2:2008/ISO 14520-2:2006.Proximity cards Part 1: Physical characteristics Identification cards . 2 2 (SABS ISO/IEC TR 14471) SANS 14509:2008/ISO 14509:2000. Ed. 2 (SABS ISO 14520-2) SANS 14520-5:2008/ISO 14520-5:2006.Physical properties and system design Part 5: FK-5-1-12 extinguishant Gaseous fire-extinguishing systems . IDT.Contactless integrated circuit(s) cards . 1 1 Water quality . 1 1 SANS 14443-3:2004/ISO/IEC 14443-3:2001. IDT. IDT. Ed. Ed. IDT.Determination of total cyanide and free cyanide by continuous flow analysis Information and documentation . IDT.Requirements for test loads SANS 14416:2005/ISO 14416:2003.Airborne sound emitted by powered recreational craft Part 1: Pass-by measurement procedures Information technology . 2 (SABS ISO 14520-6) SANS 14520-8:2008/ISO 14520-8:2006. 1 1 SANS 14403:2002/ISO 14403:2002. IDT. IDT. Ed.Physical properties and system design Part 8: HFC 125 extinguishant 2 1 SANS 14520-6:2008/ISO 14520-6:2006. Ed.Contactless integrated circuit(s) cards . IDT.Physical properties and system design Part 6: HCFC blend A extinguishant Gaseous fire-extinguishing systems . Ed. IDT.Requirements for binding of books. 1 1 SANS 14518:2008/ISO 14518:2005. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 14341:2009/ISO 14341:2002.Proximity cards Part 4: Transmission protocol Information technology . Ed.Classification Dentistry . IDT.Contactless integrated circuit(s) cards . Ed. periodicals. IDT.Physical properties and system design Part 2: CF3I extinguishant Gaseous fire-extinguishing systems .Duplicating material SANS 14356:2008/ISO 14356:2003.Software engineering Guidelines for the adoption of CASE tools Small craft . Ed. Ed. Ed. Ed.Contactless integrated circuit(s) cards . 2 (SABS ISO 14520-9) Edition Title 2 Gaseous fire-extinguishing systems . IDT. 1 1 Page 214 . 2 2 (SABS ISO 14520-15) SANS 14557:2007/ISO 14557:2002. Ed. Ed.Product evaluation Part 3: Process for developers Software engineering . 1 1 1 SANS 14644-4:2003/ISO 14644-4:2001. IDT. Ed. 2 2 (SABS ISO 14520-12) SANS 14520-13:2008/ISO 14520-13:2005. IDT. Ed. IDT.Physical properties and system design Part 13: IG-100 extinguishant Gaseous fire-extinguishing systems . 2 2 (SABS ISO 14520-14) SANS 14520-15:2008/ISO 14520-15:2005.Product evaluation Part 4: Process for acquirers Information technology . Ed. Ed. IDT. IDT. Ed. Ed. Ed. 2 2 (SABS ISO 14520-11) SANS 14520-12:2008/ISO 14520-12:2005. Ed. 1 1 (SABS ISO/IEC 14598-1) SANS 14598-2:2003/ISO/IEC 14598-2:2000. IDT. Ed. 1 1 SANS 14560:2009/ISO 14560:2004.Physical properties and system design Part 12: IG-01 extinguishant Gaseous fire-extinguishing systems . IDT.Physical properties and system design Part 11: HFC 236fa extinguishant Gaseous fire-extinguishing systems .Physical properties and system design Part 10: HFC 23 extinguishant Gaseous fire-extinguishing systems . IDT. Ed. 1 1 SANS 14644-1:1999/ISO 14644-1:1999. IDT. construction and start-up SANS 14520-10:2008/ISO 14520-10:2005. IDT. IDT. Ed.Physical properties and system design Part 14: IG-55 extinguishant Gaseous fire-extinguishing systems .Standards available in electronic format (PDF) October 2009 SANS Number SANS 14520-9:2008/ISO 14520-9:2006.Software product evaluation Part 1: General overview Software engineering . IDT. 1 (SABS ISO 14644-1) SANS 14644-2:2003/ISO 14644-2:2000. IDT. Ed.Physical properties and system design Part 9: HFC 227ea extinguishant Gaseous fire-extinguishing systems . IDT. 1 1 SANS 14598-1:1999/ISO/IEC 14598-1:1999. 2 2 (SABS ISO 14520-10) SANS 14520-11:2008/ISO 14520-11:2005. IDT. Ed.Product evaluation Part 2: Planning and management Software engineering . IDT. 1 1 SANS 14598-3:2003/ISO/IEC 14598-3:2000.Product evaluation Part 6: Documentation of evaluation modules Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness Cleanrooms and associated controlled environments Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 Cleanrooms and associated controlled environments Part 4: Design. Ed. Ed.Rubber and plastics suction hoses and hose assemblies Acceptance sampling procedures by attributes Specified quality levels in nonconfirming items per million Information technology .Software product evaluation Part 5: Process for evaluators Software engineering . 1 1 SANS 14598-4:2003/ISO/IEC 14598-4:1999. 1 1 SANS 14598-5:1998/ISO/IEC 14598-5:1998. 2 2 (SABS ISO 14520-13) SANS 14520-14:2008/ISO 14520-14:2005.Physical properties and system design Part 15: IG-541 extinguishant Fire-fighting hoses . IDT. Ed. 1 1 (SABS ISO/IEC 14598-5) SANS 14598-6:2003/ISO/IEC 14598-6:2001. Glassreinforced plastics (GRP) piping Part 1: Vocabulary. Ed. Ed.Test procedures for user and fixed equipment Part 2: Conformance test for the onboard unit application interface SANS 14907-1:2007/ISO/TS 14907-1:2005. IDT. IDT. IDT.Security techniques Digital signatures with appendix Part 1: General Information technology . Ed. IDT.Electronic fee collection . 1 (SABS ISO 14713) SANS 14756:2003/ISO/IEC 14756:1999. IDT. Ed. IDT. symbols. IDT. Ed. Ed.Software Life Cycle Processes . Ed.Glassreinforced plastics (GRP) piping Part 4: Fabrication. Ed.Security techniques Digital signatures with appendix Part 2: Identitybased mechanisms Information technology .Standards available in electronic format (PDF) October 2009 SANS Number SANS 14692-1:2009/ISO 14692-1:2002.Maintenance Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet Lifts (elevators). Ed.Glassreinforced plastics (GRP) piping Part 2: Qualification and manufacture Petroleum and natural gas industries . IDT. IDT.Zinc and aluminium coatings Guidelines Information technology . Ed. IDT. IDT.A categorization of software mock up and prototype models and their use Software Engineering . Ed.Measurement and rating of performance of computer-based software systems Software engineering . 1 1 SANS 14713:1999/ISO 14713:1999. Ed. IDT. 1 1 1 SANS 14759:2003/ISO/IEC TR 14759:1999. Ed. IDT. Ed. 1 1 SANS 14692-3:2009/ISO 14692-3:2002. 1 1 SANS 14906:2009/ISO 14906:2004. 2 (SABS ISO 14788) SANS 14798:2009/ISO 14798:2009.Electronic fee collection .Risk assessment and reduction methodology Transport information and control systems Requirements for an ITS/TICS central Data Registry and ITS/TICS Data Dictionaries Information technology . Ed. IDT.Electronic fee collection . 1 1 SANS 14888-3:2007/ISO/IEC 14888-3:2006. 2 2 SANS 14895:2008/ISO 14895:2000. 1 2 3 SANS 14817:2007/ISO 14817:2002. 2 2 SANS 14788:2007/ISO 14788:2005.Test procedures for user and fixed equipment Part 1: Description of test procedures Road transport and traffic telematics . IDT. 1 1 SANS 14692-4:2009/ISO 14692-4:2002.Application interface definition for dedicated short-range communication Road transport and traffic telematics . IDT. Ed. Ed. 1 1 SANS 14764:2009/ISO/IEC 14764:2006.Mock up and prototype .Glassreinforced plastics (GRP) piping Part 3: System design Petroleum and natural gas industries .Security techniques Digital signatures with appendix Part 3: Discrete logarithm based mechanisms Small craft . 1 SANS 14907-2:2007/ISO/TS 14907-2:2006. IDT. 1 1 SANS 14888-1:2009/ISO/IEC 14888-1:2008.Liquid-fuelled galley stoves SANS 14692-2:2009/ISO 14692-2:2002. 1 1 Road transport and traffic telematics . Ed. 1 Edition Title 1 Petroleum and natural gas industries . installation and operation Protection against corrosion of iron and steel in structures . escalators and moving walks . IDT. 1 1 1 Page 215 . 2 2 SANS 14888-2:2003/ISO/IEC 14888-2:1999. applications and materials Petroleum and natural gas industries . Ed. IDT. IDT. Ed. 2 2 SANS 15005:2007/ISO 15005:2002. IDT. Ed. 1 1 Coal flow properties Part 1: Bin flow SANS 15127:2005/ISO 5127:2001.Strong points Small craft . 1 1 Small craft . Ed.Determination of total mercury content of coal SANS 15188:2009/ISO 15188:2001.Ergonomic aspects of transport information and control systems . IDT. Ed.Dialogue management principles and compliance procedures Road vehicles . IDT.Quality management systems Guidance on the application of ISO 13485:2003 Medical devices . Ed. IDT. 1 1 Medical devices . 1 Edition Title 1 Small craft . 1 1 SANS 15189:2009/ISO 15189:2007. Ed. IDT. IDT. Ed.Symbols to be used with medical device labels. 1 1 SANS 15026:1998/ISO/IEC 15026:1998. 1 1 1 SANS 15084:2008/ISO 15084:2003. IDT. 1 1 Page 216 . IDT.Bilge-pumping systems SANS 14971:2008/ISO 14971:2007. Ed. Ed.Builder's plate SANS 14946:2008/ISO 14946:2001.Ergonomic aspects of transport information and control systems . Ed. mooring and towing . 1 (SABS ISO/IEC 15026) SANS 15083:2008/ISO 15083:2003. IDT. IDT. IDT. 1 1 SANS 15006:2007/ISO 15006:2004. Ed. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 14945:2009/ISO 14945:2004. IDT. IDT.Colony-count technique at 30 °C Medical devices .Maximum load capacity SANS 14969:2006/ISO/TR 14969:2004.Man-overboard prevention and recovery SANS 15085:2008/ISO 15085:2003. Ed. Ed. IDT.Specifications and compliance procedures for in-vehicle auditory presentation Road vehicles . 1 (SABS ISO 15214) 1 SANS 15223:2006/ISO 15223:2000.Particular requirements for quality and competence Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of mesophilic lactic acid bacteria .System and software integrity levels Small craft . Ed. 1 1 Information and documentation .Ergonomic aspects of transport information and control systems . 1 1 SANS 15117-1:2006/ISO 15117-1:2004. Ed. 1 1 SANS 15008:2007/ISO 15008:2003. Ed. labelling and information to be supplied Solid mineral fuels . IDT. 2 2 SANS 15214:1998/ISO 15214:1998. 1 1 Guidelines on the application of ISO 9001:2000 for the food and drink industry Project management guidelines for terminology standardization Medical laboratories . Ed.Specifications and compliance procedures for in-vehicle visual presentation Information technology .Vocabulary SANS 15161:2003/ISO 15161:2001. 2 1 SANS 15237:2004/ISO 15237:2003.Anchoring. IDT. 1 1 Small craft .Application of risk management to medical devices Road vehicles . IDT.Bar code verifier conformance specifications Part 1: Linear symbols Information technology . IDT.Bar code print quality test specification .Security techniques Evaluation criteria for IT security Part 1: Introduction and general model Information technology . IDT.Automatic identification and data capture techniques . 1 1 SANS 15416:2005/ISO/IEC 15416:2000.Determination of total cadmium content of coal Solid mineral fuels . 3 3 SANS 15415:2009/ISO/IEC 15415:2004. Ed.Automatic identification and data capture techniques .Data Carrier Identifiers (including Symbology Identifiers) Information technology .Guide for ISO/IEC 12207 (Software Life Cycle Processes) Systems and software engineering .Security techniques Evaluation criteria for IT security Part 2: Security functional requirements Information technology . Ed.Code 128 bar code symbology specification Information technology .Security techniques Evaluation criteria for IT security Part 3: Security assurance components Information technology . Ed.Evaluation of the measurement performance of on-line analysers Information technology .Systems life cycle processes Systems and software engineering . IDT. 2 2 SANS 15418:1999/ISO/IEC 15418:1999.Linear symbols Information technology . IDT.Two. 2 2 SANS 15408-2:2007/ISO/IEC 15408-2:2005.Bar code verifier conformance specification Part 2: Two-dimensional symbols SANS 15239:2006/ISO 15239:2005. Ed. Ed. 1 1 (SABS ISO/IEC TR 15271) SANS 15288:2008/ISO/IEC 15288:2008. Ed. 1 (SABS ISO/IEC 15418) SANS 15420:2005/ISO/IEC 15420:2000. IDT.Automatic identification and data capture techniques . Ed. IDT. Ed. 1 1 SANS 15423:2005/ISO/IEC 15423:2004. IDT. Ed.EAN/UPC Information technology . IDT.Bar code print quality test specification .EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance Information technology .Bar code symbology specification . Ed. Ed. IDT. Ed. IDT. Ed. IDT. 1 1 1 SANS 15421:2005/ISO/IEC 15421:2000. Ed. IDT.Bar code master test specifications Information technology . 1 Edition Title 1 Solid mineral fuels . IDT.Automatic identification and data capture techniques . 1 1 SANS 15417:2008/ISO/IEC 15417:2007. Ed.Automatic identification and data capture techniques . 1 1 SANS 15408-1:2007/ISO/IEC 15408-1:2005. IDT. 2 2 SANS 15408-3:2009/ISO/IEC 15408-3:2008. 2 2 SANS 15426-1:2005/ISO/IEC 15426-1:2000. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 15238:2004/ISO 15238:2003. IDT.dimensional symbols Information technology . 1 1 Page 217 . Ed.Automatic identification and data capture techniques . IDT. 2 2 SANS 15289:2007/ISO/IEC 15289:2006.Automatic identification and data capture techniques . 1 1 SANS 15426-2:2008/ISO/IEC 15426-2:2005. 1 1 SANS 15424:2009/ISO/IEC 15424:2008.Automatic identification and data capture techniques .Bar code scanner and decoder performance testing Information technology . 1 1 SANS 15271:1998/ISO/IEC TR 15271:1998.Content of systems and software life cycle process information products (Documentation) Information technology .Automatic identification and data capture techniques . IDT. Ed. IDT.Unique identifiers Part 1: Unique identifiers for transport units Information technology . IDT.Security techniques .Automatic identification and data capture techniques . IDT.Security techniques .Thin flexible cards Part 3: Test methods Information technology . IDT. 1 1 Information technology .A framework for IT security assurance Part 2: Assurance methods Information technology . 1 1 SANS 15459-1:2008/ISO/IEC 15459-1:2006.Thin flexible cards Part 2: Magnetic recording techniques Identification cards .Syntax for high-capacity ADC media Information technology .Unique identifiers Part 2: Registration procedures Information technology .Thin flexible cards Part 1: Physical characteristics Identification cards . Ed. 1 SANS 15443-3:2009/ISO/IEC TR 15443-3:2007. Ed. IDT. Ed. Ed. 1 SANS 15446:2005/ISO/IEC TR 15446:2004.PDF417 bar code symbology specification Cranes . 1 1 SANS 15459-6:2009/ISO/IEC 15459-6:2007. IDT.Records management Part 1: General Page 218 . 1 Ed. 1 1 SANS 15457-3:2004/ISO/IEC 15457-3:2002. Ed.A framework for IT security assurance Part 3: Analysis of assurance methods Information technology . 1 Ed. 1 1 SANS 15457-1:2009/ISO/IEC 15457-1:2008. IDT. 1 SANS 15443-2:2006/ISO/IEC TR 15443-2:2005. IDT.Security techniques . Ed. 2 2 SANS 15457-2:2004/ISO/IEC 15457-2:2001.Unique identifiers Part 3: Common rules for unique identifiers Information technology .Security techniques . Ed.Guide for the production of Protection Profiles and Security Targets Identification cards .Unique identifiers Part 4: Individual items Information technology . IDT. 1 1 SANS 15443-1:2006/ISO/IEC TR 15443-1:2005.Unique identifiers Part 6: Unique identifier for product groupings Information and documentation . 1 2 SANS 15459-3:2009/ISO/IEC 15459-3:2006. IDT. IDT. IDT. Ed. IDT.Unique identifiers Part 5: Unique identifier for returnable transport items (RTIs) Information technology . IDT. 1 1 SANS 15459-4:2009/ISO/IEC 15459-4:2008.Standards available in electronic format (PDF) October 2009 SANS Number SANS 15434:2008/ISO/IEC 15434:2006. Ed. Ed. IDT. 1 Ed. 1 2 SANS 15459-2:2008/ISO/IEC 15459-2:2006. 1 1 SANS 15489-1:2004/ISO 15489-1:2001. 2 1 SANS 15442:2007/ISO 15442:2005. IDT.Automatic identification and data capture techniques .Safety requirements for loader cranes SANS 15438:2008/ISO/IEC 15438:2006. Ed. Ed. 1 2 SANS 15459-5:2009/ISO/IEC 15459-5:2007. 3 Edition Title 1 Information technology . Ed. Ed.A framework for IT security assurance Part 1: Overview and framework Information technology . IDT. Ed. 2 1 (SABS ISO/IEC TR 15504-1) SANS 15504-2:2004/ISO/IEC 15504-2:2003. IDT. Ed. varnishes and raw materials for paints and varnishes . slingers. 1 1 SANS 15609-1:2007/ISO 15609-1:2004. IDT.Metric series Information technology . 2 1 SANS 15504-4:2004/ISO/IEC 15504-4:2004. Ed.Process assessment Part 4: Guidance on use for process improvement and process capability determination Information technology . 1 SANS 15494:2005/ISO 15494:2003.General rules Specification and qualification of welding procedures for metallic materials .Welding procedure specification Part 1: Arc welding SANS 15587-2:2002/ISO 15587-2:2002. 1 1 SANS 15584:2008/ISO 15584:2001. Ed.Cathodic protection of pipeline transportation systems Part 1: On-land pipelines Petroleum and natural gas industries .Sampling Small craft .Digestion for the determination of selected elements in water Part 2: Nitric acid digestion Petroleum and natural gas industries . 1 1 SANS 15528:2003/ISO 15528:2000.Specifications for components and the system .International Standard Identifier for Libraries and Related Organizations (ISIL) Cranes . IDT.Records management Part 2: Guidelines Plastics piping systems for industrial applications Polybutene (PB). IDT. IDT. Ed. IDT. Ed. IDT. IDT. 1 1 Page 219 . Ed.Process assessment Part 1: Concepts and vocabulary Information technology . IDT.Process assessment Part 5: An exemplar process assessment model Information and documentation . Ed. IDT. 1 1 SANS 15587-1:2002/ISO 15587-1:2002. 1 1 SANS 15513:2008/ISO 15513:2000. 1 1 SANS 15607:2007/ISO 15607:2003. 2 1 SANS 15511:2005/ISO 15511:2003. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 15489-2:2004/ISO/TR 15489-2:2001.Determination of caking index 1 SANS 15504-1:2005/ISO/IEC 15504-1:2004. 2 1 SANS 15504-5:2008/ISO/IEC 15504-5:2006. IDT.Competency requirements for crane drivers (operators). Ed.Cathodic protection of pipeline transportation systems Part 2: Offshore pipelines Specification and qualification of welding procedures for metallic materials .Process assessment Part 2: Performing an assessment Information technology . polyethylene (PE) and polypropylene (PP) . IDT. 1 1 SANS 15589-2:2009/ISO 15589-2:2004. 1 Edition Title 1 Information and documentation .Enginemounted fuel and electrical components Hard coal . 2 1 SANS 15504-3:2004/ISO/IEC 15504-3:2004. Ed. IDT. Ed. IDT. Ed. IDT.Digestion for the determination of selected elements in water Part 1: Aqua regia digestion Water quality . Ed.Process assessment Part 3: Guidance on performing an assessment Information technology . Ed. IDT. signallers and assessors Paints. 1 1 SANS 15589-1:2009/ISO 15589-1:2003. IDT. 1 1 Water quality . Ed. Ed.Inboard petrol engines . Ed. 1 1 SANS 15585:2007/ISO 15585:2006. Standards available in electronic format (PDF) October 2009 SANS Number SANS 15609-2:2009/ISO 15609-2:2001, IDT, Ed. 1 Edition Title 1 Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 2: Gas welding Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 3: Electron beam welding Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 5: Resistance welding Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 2: Arc welding of aluminium and its alloys Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 3: Fusion welding of non-alloyed and low-alloyed cast irons Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 4: Finishing welding of aluminium castings Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 5: Arc welding of titanium, zirconium and their alloys Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 6: Arc and gas welding of copper and its alloys Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 7: Overlay welding Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 8: Welding of tubes to tube-plate joints Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 10: Hyperbaric dry welding Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 11: Electron and laser beam welding Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 12: Spot, seam and projection welding Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 13: Resistance butt and flash welding Road transport and traffic telematics - Dedicated short range communication (DSRC) - DSRC application layer Butter - Determination of salt content Potentiometric method Small craft - Remote steering systems for inboard mini jet boats SANS 15609-3:2009/ISO 15609-3:2004, IDT, Ed. 1 1 SANS 15609-5:2009/ISO 15609-5:2004, IDT, Ed. 1 1 SANS 15614-1:2007/ISO 15614-1:2004, IDT, Ed. 1 1 SANS 15614-2:2007/ISO 15614-2:2005, IDT, Ed. 1 1 SANS 15614-3:2009/ISO 15614-3:2008, IDT, Ed. 1 1 SANS 15614-4:2008/ISO 15614-4:2005, IDT, Ed. 1 1 SANS 15614-5:2008/ISO 15614-5:2004, IDT, Ed. 1 1 SANS 15614-6:2008/ISO 15614-6:2006, IDT, Ed. 1 1 SANS 15614-7:2008/ISO 15614-7:2007, IDT, Ed. 1 1 SANS 15614-8:2008/ISO 15614-8:2002, IDT, Ed. 1 1 SANS 15614-10:2008/ISO 15614-10:2005, IDT, Ed. 1 1 SANS 15614-11:2008/ISO 15614-11:2002, IDT, Ed. 1 1 SANS 15614-12:2008/ISO 15614-12:2004, IDT, Ed. 1 1 SANS 15614-13:2008/ISO 15614-13:2005, IDT, Ed. 1 1 SANS 15628:2009/ISO 15628:2007, IDT, Ed. 1 1 SANS 15648:2005/ISO 15648:2004, IDT, Ed. 1 1 SANS 15652:2008/ISO 15652:2003, IDT, Ed. 1 1 Page 220 Standards available in electronic format (PDF) October 2009 SANS Number SANS 15654:2006/ISO 15654:2004, IDT, Ed. 1 Edition Title 1 Fatigue test method for transmission precision roller chains Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 1: Physical characteristics Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 2: Air interface and initialization Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 3: Anticollision and transmission protocol Cranes - List of equivalent terms SANS 15682:2002/ISO 15682:2000, IDT, Ed. 1 1 SANS 15693-1:2004/ISO/IEC 15693-1:2000, IDT, Ed. 1 1 SANS 15693-2:2004/ISO/IEC 15693-2:2000, IDT, Ed. 1 1 SANS 15693-3:2004/ISO/IEC 15693-3:2001, IDT, Ed. 1 1 SANS 15696:2008/ISO/TS 15696:2000, IDT, Ed. 1 1 SANS 15706:2005/ISO 15706:2002, IDT, Ed. 1 1 Information and documentation - International Standard Audiovisual Number (ISAN) Information and documentation - International Standard Musical Work Code (ISWC) Non-destructive testing - Radiation methods Computed tomography Part 1: Principles Non-destructive testing - Radiation methods Computed tomography Part 2: Examination practices Bi-directional and multi-directional fork-lift trucks Stability tests Electronic imaging - Information stored electronically - Recommendations for trustworthiness and reliability Information technology - Security techniques Security information objects for access control Dentistry - Casting and baseplate waxes SANS 15707:2005/ISO 15707:2001, IDT, Ed. 1 1 SANS 15708-1:2005/ISO 15708-1:2002, IDT, Ed. 1 1 SANS 15708-2:2005/ISO 15708-2:2002, IDT, Ed. 1 1 SANS 15794:2007/ISO 15794:2001, IDT, Ed. 1 1 SANS 15801:2005/ISO/TR 15801:2004, IDT, Ed. 1 1 SANS 15816:2006/ISO/IEC 15816:2002, IDT, Ed. 1 1 SANS 15854:2008/ISO 15854:2005, IDT, Ed. 1 1 SANS 15870:2007/ISO 15870:2000, IDT, Ed. 1 1 Powered industrial trucks - Safety signs and hazard pictorials - General principles Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 1: General Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 2: Pipes Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 3: Fittings Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 5: Fitness for purpose of the system SANS 15874-1:2004/ISO 15874-1:2003, IDT, Ed. 1 1 SANS 15874-2:2004/ISO 15874-2:2003, IDT, Ed. 1 1 SANS 15874-3:2004/ISO 15874-3:2003, IDT, Ed. 1 1 SANS 15874-5:2004/ISO 15874-5:2003, IDT, Ed. 1 1 Page 221 Standards available in electronic format (PDF) October 2009 SANS Number SANS 15875-1:2004/ISO 15875-1:2003, IDT, Ed. 1 Edition Title 2 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 1: General Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 2: Pipes Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 3: Fittings Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 5: Fitness for purpose of the system Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 1: General Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 2: Pipes Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 3: Fittings Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 5: Fitness for purpose of the system Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 1: General Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 2: Pipes Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 3: Fittings Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride)(PVCC) Part 5: Fitness for purpose of the system Washer-disinfectors Part 1: General requirements, terms and definitions and tests Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc Washer-disinfectors Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes Information technology - Software user documentation process Information and documentation - Codes for the representation of names of scripts Systems and software engineering - Measurement process Information Technology - Software engineering environment services SANS 15875-2:2004/ISO 15875-2:2003, IDT, Ed. 1 2 SANS 15875-3:2004/ISO 15875-3:2003, IDT, Ed. 1 2 SANS 15875-5:2004/ISO 15875-5:2003, IDT, Ed. 1 2 SANS 15876-1:2005/ISO 15876-1:2003, IDT, Ed. 1 1 SANS 15876-2:2005/ISO 15876-2:2003, IDT, Ed. 1 1 SANS 15876-3:2005/ISO 15876-3:2003, IDT, Ed. 1 1 SANS 15876-5:2005/ISO 15876-5:2003, IDT, Ed. 1 1 SANS 15877-1:2005/ISO 15877-1:2003, IDT, Ed. 1 1 SANS 15877-2:2005/ISO 15877-2:2003, IDT, Ed. 1 1 SANS 15877-3:2005/ISO 15877-3:2003, IDT, Ed. 1 1 SANS 15877-5:2005/ISO 15877-5:2003, IDT, Ed. 1 1 SANS 15883-1:2008/ISO 15883-1:2006, IDT, Ed. 1 1 SANS 15883-2:2008/ISO 15883-2:2006, IDT, Ed. 1 1 SANS 15883-4:2008/ISO 15883-4:2008, IDT, Ed. 1 1 SANS 15910:2003/ISO/IEC 15910:1999, IDT, Ed. 1 1 SANS 15924:2005/ISO 15924:2004, IDT, Ed. 1 1 SANS 15939:2009/ISO/IEC 15939:2007, IDT, Ed. 2 2 SANS 15940:2009/ISO/IEC 15940:2006, IDT, Ed. 1 1 Page 222 Standards available in electronic format (PDF) October 2009 SANS Number SANS 15945:2002/ISO/IEC 15945:2002, IDT, Ed. 1 Edition Title 1 Information technology - Security techniques Specification of TTP services to support the application of digital signatures Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 1: General Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 2: Digital signatures Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 3: Key establishment Information technology - Security techniques Cryptographic techniques based on elliptic curves Part 4: Digital signatures giving message recovery Information technology - Security techniques - IT intrusion detection framework Information technology - Radio frequency identification for item management - Unique identification for RF tags HIV and AIDS management systems - General requirements Information technology - Automatic identification and data capture techniques - Data Matrix bar code symbology specification Rubber condoms for clinical trials - Measurement of physical properties Rubber condoms - Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms Methods for the calibration of vibration and shock transducers Part 1: Basic concepts Methods for the calibration of vibration and shock transducers Part 11: Primary vibration calibration by laser interferometry Methods for the calibration of vibration and shock transducers Part 13: Primary shock calibration using laser interferometry Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer Systems and software engineering - Life cycle processes - Risk management Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength Industrial valves - Ball valves of thermoplastics materials SANS 15946-1:2009/ISO/IEC 15946-1:2008, IDT, Ed. 2 SANS 15946-2:2007/ISO/IEC 15946-2:2002, IDT, Ed. 1 SANS 15946-3:2007/ISO/IEC 15946-3:2002, IDT, Ed. 1 SANS 15946-4:2007/ISO/IEC 15946-4:2004, IDT, Ed. 1 2 1 1 1 SANS 15947:2003/ISO/IEC TR 15947:2002, IDT, Ed. 1 1 SANS 15963:2008/ISO/IEC 15963:2004, IDT, Ed. 1 1 SANS 16001:2007/AMS 16001:2003, MOD 1 SANS 16022:2008/ISO/IEC 16022:2006, IDT, Ed. 2 1 SANS 16037:2003/ISO 16037:2002, IDT, Ed. 1 1 SANS 16038:2006/ISO 16038:2005, IDT, Ed. 1 1 SANS 16063-1:2008/ISO 16063-1:1998, IDT, Ed. 1 1 SANS 16063-11:2008/ISO 16063-11:1999, IDT, Ed. 1 1 SANS 16063-13:2008/ISO 16063-13:2001, IDT, Ed. 1 1 SANS 16063-21:2008/ISO 16063-21:2003, IDT, Ed. 1 1 SANS 16063-22:2008/ISO 16063-22:2005, IDT, Ed. 1 1 SANS 16085:2007/ISO/IEC 16085:2006, IDT, Ed. 2 1 SANS 16133:2003/ISO 6133:1998, IDT, Ed. 2 1 SANS 16135:2009/ISO 16135:2006, IDT, Ed. 1 1 Page 223 Standards available in electronic format (PDF) October 2009 SANS Number SANS 16147:2008/ISO 16147:2002, IDT, Ed. 1 Edition Title 1 Small craft - Inboard diesel engines - Enginemounted fuel and electrical components Technical aids for persons with disability Environmental control systems for daily living Statistical interpretation of data Part 6: Determination of statistical tolerance intervals Software engineering - Guide for the application of ISO/IEC 12207 to project management Mobile elevating work platforms - Design calculations, safety requirements and test methods Information technology - Automatic identification and data capture techniques - Code 39 bar code symbology specification Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications Water quality - Determination of mercury - Methods involving enrichment by amalgamation Computer applications in terminology Terminological markup framework Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of betaglucuronidase-positive Escherichia coli Part 3: Most probable number technique using 5-bromo-4-chloro3-indolyl-beta-D-glucuronide Microbiology of food and animal feeding stuffs Horizontal method for the detection of Escherichia coli O157 Earth-moving machinery - Recyclability and recoverability - Terminology and calculation method Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations Conformity assessment - Vocabulary and general principles General criteria for the operation of various types of bodies performing inspection Conformity assessment - Requirements for bodies providing audit and certification of management systems Conformity assessment - General requirements for bodies operating certification of persons General requirements for the competence of testing and calibration laboratories SANS 16201:2009/ISO 16201:2006, IDT, Ed. 1 1 SANS 16269-6:2006/ISO 16269-6:2005, IDT, Ed. 1 1 SANS 16326:2003/ISO/IEC TR 16326:1999, IDT, Ed. 1 1 SANS 16368:2007/ISO 16368:2003, IDT, Ed. 1 1 SANS 16388:2008/ISO/IEC 16388:2007, IDT, Ed. 2 1 SANS 16390:2008/ISO/IEC 16390:2007, IDT, Ed. 2 (SABS ISO/IEC 16390) SANS 16422:2007/ISO 16422:2006, IDT, Ed. 1 2 1 SANS 16590:2000/ISO 16590:2000, IDT, Ed. 1 (SABS ISO 16590) SANS 16642:2006/ISO 16642:2003, IDT, Ed. 1 1 1 SANS 16649-3:2008/ISO/TS 16649-3:2005, IDT, Ed. 1 1 SANS 16654:2003/ISO 16654:2001, IDT, Ed. 1 1 SANS 16714:2009/ISO 16714:2008, IDT, Ed. 1 1 SANS 16949:2009/ISO/TS 16949:2009, IDT, Ed. 3 (SABS ISO/TS 16949) 3 SANS 17000:2005/ISO/IEC 17000:2004, IDT, Ed. 1 1 SANS 17020:1998/ISO/IEC 17020:1998, IDT, Ed. 1 (SABS ISO/IEC 17020) SANS 17021:2006/ISO/IEC 17021:2006, IDT, Ed. 1 1 1 SANS 17024:2005/ISO/IEC 17024:2003, IDT, Ed. 1 1 SANS 17025:2005/ISO/IEC 17025:2005, IDT, Ed. 2 (SABS ISO/IEC 17025) 2 Page 224 Standards available in electronic format (PDF) October 2009 SANS Number SANS 17040:2005/ISO/IEC 17040:2005, IDT, Ed. 1 Edition Title 1 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies Health informatics - Public key infrastructure Part 1: Framework and overview Health informatics - Public key infrastructure Part 2: Certificate profile Health informatics - Public key infrastructure Part 3: Policy management of certification authority Health Informatics - Controlled health terminology Structure and high-level indicators Leather - Physical and mechanical tests Determination of water vapour absorption Leather - Physical and mechanical tests Determination of softness Coal - Proximate analysis SANS 17090-1:2003/ISO/TS 17090-1:2002, IDT, Ed. 1 SANS 17090-2:2003/ISO/TS 17090-2:2002, IDT, Ed. 1 SANS 17090-3:2003/ISO/TS 17090-3:2002, IDT, Ed. 1 SANS 17117:2003/ISO/TS 17117:2002, IDT, Ed. 1 1 1 1 1 SANS 17229:2009/ISO 17229:2002, IDT, Ed. 1 1 SANS 17235:2009/ISO 17235:2002, IDT, Ed. 1 1 SANS 17246:2006/ISO 17246:2005, IDT, Ed. 1 1 SANS 17247:2006/ISO 17247:2005, IDT, Ed. 1 1 Coal - Ultimate analysis SANS 17381:2008/ISO 17381:2003, IDT, Ed. 1 1 Water quality - Selection and application of ready-touse test kit methods in water analysis Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection Sterilization of medical devices - Information to be provided by the manufacturer for the processing of resterilizable medical devices Sterilization of health care products - Moist heat Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices Information technology - Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized Information technology - Radio frequency identification for item management Part 2: Parameters for air interface communications below 135 kHz Information technology - Radio frequency identification for item management Part 3: Parameters for air interface communications at 13,56 MHz Information technology - Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz SANS 17495:2002/ISO 17495:2001, IDT, Ed. 1 1 SANS 17664:2007/ISO 17664:2004, IDT, Ed. 1 1 SANS 17665-1:2007/ISO 17665-1:2006, IDT, Ed. 1 1 SANS 18000-1:2009/ISO/IEC 18000-1:2008, IDT, Ed. 2 2 SANS 18000-2:2006/ISO/IEC 18000-2:2004, IDT, Ed. 1 1 SANS 18000-3:2009/ISO/IEC 18000-3:2008, IDT, Ed. 2 2 SANS 18000-4:2009/ISO/IEC 18000-4:2008, IDT, Ed. 2 2 Page 225 Personal identification ISO-compliant driving licence Part 1: Physical characteristics and basic data set Information technology . 1 1 SANS 18028-3:2009/ISO/IEC 18028-3:2005.Security techniques . IDT. Ed.Personal identification ISO-compliant driving licence Part 2: Machinereadable technologies Information technology . IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology . IDT.Security techniques Random bit generation Information technology .IT network security Part 3: Securing communications between networks using security gateways Information technology . Ed. IDT. Ed.Security techniques . Ed. Ed. 1 1 SANS 18004:2008/ISO/IEC 18004:2006. IDT.Security techniques . 1 1 SANS 18028-4:2009/ISO/IEC 18028-4:2005.Personal identification ISO-compliant driving licence Part 3: Access control.Guidelines for the design and preparation of user documentation for application software Information technology . Ed. 2 2 SANS 18014-2:2004/ISO/IEC 18014-2:2002. 2 1 SANS 18013-1:2007/ISO/IEC 18013-1:2005. Ed. IDT.Security techniques . IDT.Security techniques .Automatic identification and data capture techniques .IT network security Part 1: Network security management Information technology .IT network security Part 5: Securing communications across networks using virtual private networks Information technology . 1 1 SANS 18019:2004/ISO/IEC 18019:2004.Timestamping services Part 3: Mechanisms producing linked tokens Software and system engineering . Ed.Time stamping services Part 2: Mechanisms producing independent tokens Information technology .Radio frequency identification for item management Part 6: Parameters for air interface communications at 860 MHz to 960 MHz Information technology . authentication and integrity validation Information technology .Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz Information technology . 1 1 SANS 18014-1:2009/ISO/IEC 18014-1:2008.Security techniques .Security techniques . IDT. Ed. Ed. IDT. IDT. Ed. Ed. Ed. 1 1 SANS 18032:2007/ISO/IEC 18032:2005. 1 1 Page 226 . IDT. Ed.Time stamping services Part 1: Framework Information technology . Ed. 1 1 SANS 18013-3:2009/ISO/IEC 18013-3:2009. IDT.QR Code 2005 bar code symbology specification Information technology . Ed. IDT. 1 1 SANS 18031:2007/ISO/IEC 18031:2005.Security techniques . 1 1 SANS 18000-7:2008/ISO/IEC 18000-7:2008. 1 1 SANS 18028-1:2009/ISO/IEC 18028-1:2006.Radio frequency identification for item management . IDT. 1 1 SANS 18014-3:2004/ISO/IEC 18014-3:2004. IDT. IDT. 1 2 SANS 18001:2008/ISO/IEC TR 18001:2004. IDT. Ed.IT network security Part 4: Securing remote access Information technology .Prime number generation SANS 18000-6:2006/ISO/IEC 18000-6:2004.Application requirements profiles Information technology . 1 1 SANS 18013-2:2008/ISO/IEC 18013-2:2008. 1 1 SANS 18028-5:2009/ISO/IEC 18028-5:2006. 1 1 SANS 18234-2:2007/ISO/TS 18234-2:2006. Ed. 1 SANS 18047-4:2006/ISO/IEC TR 18047-4:2004. Ed. Semantics and Framing Structure (SSF) Traffic and Travel Information (TTI) . IDT.45 GHz Traffic and Travel Information (TTI) .TTI via Transport Protocol Expert Group (TPEG) datastreams Part 2: Syntax.Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2. IDT. 1 1 SANS 18234-3:2007/ISO/TS 18234-3:2006. 1 SANS 18033-4:2007/ISO/IEC 18033-4:2005. 1 1 SANS 18045:2007/ISO/IEC 18045:2005.Radio frequency identification device performance test methods Part 3: Test methods for tag performance Information technology . IDT. 1 Ed.TTI via Transport Protocol Expert Group (TPEG) datastreams Part 4: Road Traffic Message (RTM) application Traffic and Travel Information (TTI) . IDT. IDT.Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz Information technology . 1 SANS 18043:2009/ISO/IEC 18043:2006.Security techniques Encryption algorithms Part 1: General Information technology . IDT. 1 1 SANS 18047-2:2008/ISO/IEC TR 18047-2:2006. IDT.TTI via Transport Protocol Expert Group (TPEG) datastreams Part 3: Service and Network Information (SNI) application Traffic and Travel Information (TTI) . Ed.Security techniques Encryption algorithms Part 4: Stream ciphers Information technology . Ed. IDT. IDT. IDT. Ed.Security techniques Information security incident management Information technology . Ed. Ed. 1 1 SANS 18234-4:2007/ISO/TS 18234-4:2006. numbering and versions Traffic and Travel Information (TTI) .Security techniques Encryption algorithms Part 3: Block ciphers Information technology . IDT. 1 1 SANS 18234-6:2007/ISO/TS 18234-6:2006. Ed. IDT. 1 Edition Title 1 Information technology . 1 SANS 18033-3:2007/ISO/IEC 18033-3:2005.Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13. Ed.TTI via Transport Protocol Expert Group (TPEG) datastreams Part 1: Introduction. 1 Ed. Ed. Ed. 1 Ed.Security techniques Encryption algorithms Part 2: Asymmetric ciphers Information technology .Standards available in electronic format (PDF) October 2009 SANS Number SANS 18033-1:2007/ISO/IEC 18033-1:2005. IDT. IDT. 1 1 Page 227 . deployment and operations of intrusion detection systems Information technology .56 MHz Information technology . 1 SANS 18033-2:2007/ISO/IEC 18033-2:2006. IDT.TTI via Transport Protocol Expert Group (TPEG) datastreams Part 6: Location referencing applications 1 1 1 1 SANS 18044:2008/ISO/IEC TR 18044:2004. 1 SANS 18234-1:2007/ISO/TS 18234-1:2006. Ed.Security techniques Selection. Ed. 1 SANS 18047-3:2006/ISO/IEC TR 18047-3:2004. 1 1 SANS 18046-3:2008/ISO/IEC 18046-3:2007. IDT.Security techniques Methodology for IT security evaluation Information technology . Standards available in electronic format (PDF) October 2009 SANS Number SANS 18283:2007/ISO 18283:2006. Ed. Ed. IDT. Ed. 1 1 Geographic information . 1 1 Geographic information . Ed. IDT. 2 2 SANS 19112:2004/ISO 19112:2003. 1 1 Health informatics . Ed. 1 Edition Title 1 Hard coal and coke . 1 1 SANS 19092:2009/ISO 19092:2008. inspection. IDT. 1 1 SANS 18893:2007/ISO 18893:2004. IDT. Ed.Requirements for an electronic health record architecture Cosmetics . IDT. Ed.Spatial referencing by coordinates Geographic information . 1 1 SANS 18878:2007/ISO 18878:2004. Ed. IDT. IDT.Reference model SANS 19103:2006/ISO/TS 19103:2005. Ed. maintenance and operation Document management . 1 1 Geographic information . Ed.4 (PDF/A-1) Guidelines for quality and/or environmental management systems auditing Financial services . IDT.Detection of specified and non-specified microorganisms Microbiology of food and animal feeding stuffs Horizontal methods for sampling techniques from surfaces using contact plates and swabs Health informatics . IDT. IDT. Ed. 1 1 SANS 19111:2009/ISO 19111:2007. 1 1 Page 228 .Biometrics .Safety principles. IDT.Methodology for feature cataloguing Geographic information . IDT. IDT.Temporal schema SANS 19109:2006/ISO 19109:2005. Ed. IDT. Ed. 1 1 Geographic information . Ed.Security framework SANS 18415:2009/ISO 18415:2007.Microbiology .Clinical analyser interfaces to laboratory information systems .Spatial referencing by geographic identifiers SANS 19110:2005/ISO 19110:2005. 1 1 SANS 18812:2003/ISO 18812:2003.Spatial schema SANS 19108:2003/ISO 19108:2002. 1 1 Geographic information .Conceptual schema language Geographic information . IDT. 1 1 SANS 19005-1:2006/ISO 19005-1:2005. Ed. 1 1 SANS 19011:2003/ISO 19011:2002. Ed.Manual sampling SANS 18308:2007/ISO/TS 18308:2004. IDT. IDT. 1 1 SANS 19106:2004/ISO 19106:2004. Ed. IDT. 1 1 SANS 18593:2004/ISO 18593:2004. Ed.Operator (driver) training Mobile elevating work platforms .Rules for application schema Geographic information .Conformance and testing SANS 19105:2003/ISO 19105:2000. Ed. Ed.Profiles SANS 19107:2003/ISO 19107:2003. 1 1 SANS 19101:2003/ISO 19101:2002. IDT. IDT.Use profiles Mobile elevating work platforms . 1 1 Geographic information .Electronic document file format for long-term preservation Part 1: Use of PDF 1. 1 1 Geographic information . IDT.Quality evaluation procedures Geographic information . 1 1 SANS 19141:2009/ISO/IEC 19141:2008.Procedures for item registration Geographic information . Ed. 1 1 SANS 19127:2006/ISO/TS 19127:2005. IDT. IDT. Ed.Quality principles SANS 19114:2004/ISO 19114:2003. IDT. Ed.Guide to the Software Engineering Body of Knowledge (SWEBOK) SANS 19123:2006/ISO 19123:2005. IDT. Ed.Location-based services Tracking and navigation Geographic information . IDT. 1 1 Page 229 . 1 1 Geographic information . 1 1 SANS 19133:2006/ISO 19133:2005. Ed. Ed. 1 1 Geographic information .Geodetic codes and parameters Geographic information .Functional standards SANS 19121:2000/ISO/TR 19121:2000. Ed. 1 1 SANS 19752:2007/ISO/IEC 19752:2004. Ed. Ed. 1 1 SANS 19579:2007/ISO 19579:2006. 1 1 Geographic information .Simple feature access Part 1: Common architecture Geographic information .Encoding SANS 19119:2005/ISO 19119:2005. 1 Edition Title 1 Geographic information .Determination of sulfur by IR spectrometry Information technology .Simple feature access Part 2: SQL option Geographic information .Portrayal SANS 19118:2006/ISO 19118:2005. IDT. IDT. IDT.Imagery and gridded data 1 Geographic information/Geomatics . Ed. IDT.Positioning services SANS 19117:2006/ISO 19117:2005. 1 1 SANS 19759:2007/ISO/IEC TR 19759:2005.Services SANS 19120:2003/ISO/TR 19120:2001. 1 (SABS ISO/TR 19121) SANS 19122:2005/ISO/TR 19122:2004. IDT.Schema for coverage geometry and functions Geographic information . IDT. Ed.Schema for moving features Solid mineral fuels . 1 1 SANS 19125-1:2005/ISO 19125-1:2004. Ed.Qualification and certification of personnel Geographic information . Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 19113:2003/ISO 19113:2002. IDT. Ed. Ed. IDT. 1 1 Geographic information . 1 1 Geographic information . Ed. Ed. IDT. Ed. IDT. IDT. 1 1 Geographic information . IDT. Ed. IDT. 1 1 SANS 19125-2:2005/ISO 19125-2:2004.Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components Software Engineering . 1 1 SANS 19135:2006/ISO 19135:2005. 1 1 SANS 19116:2004/ISO 19116:2004. IDT. Ed.Metadata SANS 19115:2003/ISO 19115:2003. Harmonized vocabulary Part 4: General terms relating to radio communications Information technology . 1 2 SANS 19762-3:2009/ISO/IEC 19762-3:2008.A guide for the application of ISO/IEC 15288 (System life cycle processes) Software engineering . IDT. Ed. 1 1 SANS 19790:2009/ISO/IEC 19790:2006. IDT. 1 1 SANS 19794-2:2007/ISO/IEC 19794-2:2005. Ed.Harmonized vocabulary Part 1: General terms relating to AIDC Information technology . IDT. Ed. 1 1 SANS 19794-1:2007/ISO/IEC 19794-1:2006.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Systems engineering . Ed. 1 1 SANS 19784-1:2007/ISO/IEC 19784-1:2006. 1 2 SANS 19762-4:2009/ISO/IEC 19762-4:2008. IDT. Ed. Ed. IDT. 1 1 SANS 19791:2007/ISO/IEC TR 19791:2006. IDT.Biometric data interchange formats Part 2: Finger minutiae data Information technology . IDT.Automatic identification and data capture (AIDC) techniques . Ed.Automatic identification and data capture (AIDC) techniques . IDT. Ed. Ed.Biometric data interchange formats Part 4: Finger image data Information technology .Automatic identification and data capture (AIDC) techniques . IDT. Ed. 1 1 SANS 19785-3:2008/ISO/IEC 19785-3:2007. 1 1 SANS 19794-4:2007/ISO/IEC 19794-4:2005. IDT.Biometric data interchange formats Part 5: Face image data SANS 19760:2004/ISO/IEC TR 19760:2003. 1 1 SANS 19762-1:2009/ISO/IEC 19762-1:2008. 1 2 SANS 19762-2:2009/ISO/IEC 19762-2:2008.Harmonized vocabulary Part 3: Radio frequency identification (RFID) Information technology . Ed. 1 1 SANS 19794-5:2007/ISO/IEC 19794-5:2005.Common Biometric Exchange Formats Framework Part 1: Data element specification Information Technology .Effects of gloss and low substrate opacity on reading of bar code symbols Information technology . Ed. Ed. 1 1 SANS 19785-1:2007/ISO/IEC 19785-1:2006.A functional size measurement method Information technology . 1 1 SANS 19782:2008/ISO/IEC TR 19782:2006.Automatic identification and data capture (AIDC) techniques . 1 1 SANS 19761:2003/ISO/IEC 19761:2003. Ed. Ed. 1 1 Page 230 .COSMIC-FFP .Biometric data interchange formats Part 1: Framework Information technology . IDT. Ed.Security techniques Security requirements for cryptographic modules Information technology .Common biometric exchange formats framework Part 3: Patron format specifications Information technology . IDT.Harmonized vocabulary Part 2: Optically readable media (ORM) Information technology .Biometric application programming interface Part 1: BioAPI specification Information technology .Automatic identification and data capture (AIDC) techniques .Security techniques Security assessment of operational systems Information technology . 1 1 SANS 19762-5:2009/ISO/IEC 19762-5:2008. IDT.Harmonized vocabulary Part 5: Locating systems Information technology . IDT.Automatic identification and data capture techniques . IDT. IDT. Ed. IDT. IDT. IDT. IDT. 1 1 SANS 19795-3:2009/ISO/IEC TR 19795-3:2007. Ed. Ed. IDT. Ed. Ed. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology . 4 (SABS ECE R 3) SANS 20004:1997/ECE R4:1997. stop-lamps and endoutline marker lamps for power-driven vehicles and their trailers SANS 20003:2005/ECE R3:2005. 4 (SABS ECE R 5) 1 SANS 20006:2003/ECE R6:2001. Rev 4 (SABS ECE R 7) 2 3 Page 231 .Quality management. IDT. IDT.Biometric performance testing and reporting Part 2: Testing methodologies for technology and scenario evaluation Information technology .Service management Part 2: Code of practice Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam and/or a driving beam and equipped with filament lamps of categories R2 and/or HS1 Uniform provisions concerning the approval of retroreflective devices for power-driven vehicles and their trailers Uniform provisions concerning the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers Uniform provisions concerning the approval of power-driven vehicle's sealed-beam headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers Uniform provisions concerning the approval of front and rear position (side) lamps. IDT. assurance and metrics Part 1: General approach Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components Cranes . Ed. Ed. IDT. IDT. 5 (SABS ECE R 1) 1 Information technology . Ed. IDT. Ed. 4 (SABS ECE R 6) SANS 20007:2007/ECE R7:2006. Ed. 1 Ed. 1 1 SANS 19798:2007/ISO/IEC 19798:2006. IDT.Biometric performance testing and reporting Part 3: Modality .Specific testing Information technology . Ed. Ed.Safety code on mobile cranes SANS 19794-6:2007/ISO/IEC 19794-6:2005. 1 SANS 19795-4:2009/ISO/IEC 19795-4:2008. 1 1 SANS 19795-1:2007/ISO/IEC 19795-1:2006. 1 1 SANS 20000-1:2006/ISO/IEC 20000-1:2005. 1 1 SANS 20001:1992/ECE R1:1992.Biometric data interchange formats Part 6: Iris image data Information technology .Biometric performance testing and reporting Part 1: Principles and framework Information technology . 1 1 SANS 19961:2007/ISO/TR 19961:2005. 1 1 SANS 20000-2:2006/ISO/IEC 20000-2:2005. Ed. 1 1 SANS 19795-2:2007/ISO/IEC 19795-2:2007. Ed.Learning. IDT. education and training . IDT. Ed.Service management Part 1: Specification Information technology . IDT.Biometric performance testing and reporting Part 4: Interoperability performance testing Information technology . 2 (SABS ECE R 4) 2 1 SANS 20005:1992/ECE R5:1992. Ed. 1 1 SANS 19796-1:2006/ISO/IEC 19796-1:2005. restraint systems. HIR2 and/or H11) Uniform provisions concerning the approval of category L2. IDT. Ed. their anchorages and any head restraints Uniform provisions concerning the approval of power-driven vehicle front fog lamps Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H4 lamps) Uniform provisions concerning the approval of vehicles with regard to their interior fittings Uniform provisions concerning the approval of protective helmets and of their visors for drivers and passengers of motor cycles and mopeds Uniform provisions concerning the approval of reversing lamps for power-driven vehicles and their trailers Uniform provisions for the approval of advancewarning triangles Uniform provisions for the approval of audible warning devices and of motor vehicles with regard to their audible signals SANS 20009:2007/ECE R9:1997. Ed. Ed. IDT. 3 (SABS ECE R 12) 1 1 SANS 20013:2009/ECE R13:2008. Ed. Rev 4 2 SANS 20019:2008/ECE R19:2006. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 20008:2004/ECE R8:2002. IDT. IDT. HB4. IDT. 2 (SABS ECE R 27) SANS 20028:1972/ECE R28:1972. 6 (SABS ECE R 13) 3 SANS 20013-H:2009/ECE R13-H:2008. Rev 2 1 SANS 20014:2006/ECE R14:2006. Rev 1 (SABS ECE R 11) SANS 20012:1994/ECE R12:1994. Ed. Rev 4 (SABS ECE R 19) SANS 20020:2008/ECE R20:2006. H2. IDT. N and O with regard to braking Uniform provisions concerning the approval of passenger cars with regard to braking Uniform provisions concerning the approval of vehicles with regard to safety-belt anchorages. H9. Ed. IDT (SABS ECE R 21) SANS 20022:2005/ECE R22:2002. IDT. IDT. Ed. IDT. Ed. isofix anchorages systems and isofix top tether anchorages Uniform provisions concerning the approval of I. H3. Ed. Ed. H8. Rev 3 (SABS ECE R 20) 2 2 SANS 20021:1993/ECE R21:1993. child restraint systems and isofix child restraint systems for occupants of power-driven vehicles II. 5 (SABS ECE R 22) SANS 20023:2007/ECE R23:2003. Rev 2 1 SANS 20011:1981/ECE R11:1981. Ed. IDT. child restraint systems and isofix child restraint systems Uniform provisions concerning the approval of vehicles with regard to the seats. Ed. Ed. Ed. Ed. IDT. HB3. Vehicles equipped with safety-belts. Rev 2 1 SANS 20010:2007/ECE R10:1997. restraint systems. Rev 4 (SABS ECE R 14) 2 SANS 20016:2006/ECE R16:2005. Rev 2 (SABS ECE R 23) SANS 20027:1998/ECE R27:1998. Safety-belts. IDT. 5 (SABS ECE R 8) Edition Title 2 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H1. L4 and L5 vehicles with regard to noise Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility Uniform provisions concerning the approval of vehicles with regard to door latches and door retention components Uniform provisions concerning the approval of vehicles with regard to the protection of the driver against the steering mechanism in the event of impact Uniform provisions concerning the approval of vehicles of categories M. H7. 1 (SABS ECE R 28) 1 2 2 1 1 Page 232 . IDT. Rev 5 (SABS ECE R 16) 2 SANS 20017:2004/ECE R17:2002. IDT. IDT. HIR1. Rev 2 (SABS ECE R 46) SANS 20047:2004/ECE R47:1981. Rev 4 (SABS ECE R 37) SANS 20039:2003/ECE R39:2003. Ed. Rev 2 1 Page 233 . IDT. Ed. Ed. Ed. Rev 5 (SABS ECE R 48) SANS 20049:2009/ECE R49:2008. Ed. Ed. IDT. Rev 2 Edition Title 1 Pneumatic tyres for passenger cars and their trailers SANS 20031:1992/ECE R31:1992. Ed. Ed. 3 1 SANS 20053:2005/ECE R53:2002. and the emission of gaseous pollutants from positive-ignition engines fuelled with natural gas or liquefied petroleum gas for use in vehicles Uniform provisions concerning the approval of front position lamps. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 20030:2007/ECE R30:1999. stop lamps. Ed. IDT. rear position lamps. Ed. 2 1 SANS 20043:2005/ECE R43:2004. IDT. IDT. IDT. Ed. Rev 1 (SABS ECE R 50) 2 SANS 20052:2004/ECE R52:2003. IDT. IDT. Ed. Rev 1 1 SANS 20054:2007/ECE R54:2004. IDT. IDT. 3 (SABS ECE R 43) SANS 20044:1998/ECE R44:1998. IDT. 3 1 SANS 20037:2007/ECE R37:2005. Rev 4 3 2 SANS 20050:2007/ECE R50:2004. IDT. IDT. 1 2 1 2 1 SANS 20048:2009/ECE R48:2008. IDT. direction indicators and rear-registration-plate illuminating devices for vehicles of category L Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction Uniform provisions concerning the approval of category L3 vehicles with regard to the installation of lighting and light-signalling devices Pneumatic tyres for commercial vehicles and their trailers SANS 20036:2004/ECE R36:2002. Ed. 2 3 1 SANS 20040:2005/ECE R40:1979. Ed. 2 (SABS ECE R 31) 1 Uniform provisions concerning the approval of power-driven vehicle's sealed-beam headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both Uniform provisions concerning the approval of large passenger vehicles with regard to their general construction Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power-driven vehicles and of their trailers Uniform provisions concerning the approval of vehicles with regard to the speedometer equipment including its installation Uniform provisions concerning the approval of motorcycles equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine Uniform provisions concerning the approval of motor cycles with regard to noise Uniform provisions concerning the approval of safety glazing materials and their installation on vehicles Uniform provisions concerning the approval of restraining devices for child occupants of powerdriven vehicles ("child restraint system") Uniform provisions concerning the approval of devices for indirect vision and of motor vehicles with regard to the installation of these devices Uniform provisions concerning the approval of mopeds equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices Uniform provisions concerning the measures to be taken against the emission of gaseous and particulate pollutants from compression-ignition engines for use in vehicles. IDT. Ed. Ed. 1 1 SANS 20041:2004/ECE R41:1994. Ed. 1 (SABS ECE R 44) SANS 20046:2006/ECE R46:2005. IDT. tell-tales and indicators Uniform provisions concerning the approval of power-driven vehicles with handlebars with regard to their protection against unauthorized use Uniform provisions concerning the approval of twowheeled mopeds with regard to noise Temporary-use spare wheels/tyres SANS 20056:1989/ECE R56:1989. IDT. IDT. IDT. Ed. IDT. 1 1 SANS 20062:2007/ECE R62:1984. trailers and semi-trailers with regard to their lateral protection Uniform provisions concerning the approval of category L1 vehicles with regard to the installation of lighting and light-signalling devices Uniform provisions concerning the approval of pneumatic tyres for motor cycles and mopeds Uniform provisions concerning the approval of headlamps for mopeds emitting a driving beam and a passing beam SANS 20067:2006/ECE R67:2006. Ed. Ed. 1 (SABS ECE R 76) 1 Page 234 . approval of specific equipment of motor vehicles using liquefied petroleum gases in their propulsion system. Ed. IDT. IDT. Ed. II. IDT. IDT. Ed. Ed. 1 (SABS ECE R 69) SANS 20070:1987/ECE R70:1987. 1 1 SANS 20064:2007/ECE R64:1985. Ed. 2 (SABS ECE R 57) SANS 20059:2007/ECE R59:1983. Ed. 1 1 1 1 SANS 20060:2007/ECE R60:1984. Rev 2 2 SANS 20069:1987/ECE R69:1987. 2 Edition Title 1 Uniform provisions concerning the approval of mechanical coupling components of combinations of vehicles Uniform provisions concerning the approval of headlamps for mopeds and vehicles treated as such Uniform provisions concerning the approval of headlamps for motor cycles and vehicles treated as such Uniform provisions concerning the approval of replacement silencing systems Uniform provisions concerning the approval of twowheeled motor cycles and mopeds with regard to driver-operated controls including the identification of controls.Standards available in electronic format (PDF) October 2009 SANS Number SANS 20055:2003/ECE R55:2001. 1 1 SANS 20063:2004/ECE R63:1985. IDT. Ed. IDT. 2 (SABS ECE R 74) SANS 20075:2004/ECE R75:1997. Ed. Ed. 1 (SABS ECE R 70) SANS 20072:1988/ECE R72:1988. 1 1 SANS 20065:2007/ECE R65:2005. IDT. Rev 2 (SABS ECE R 73) SANS 20074:2000/ECE R74:2000. 1 (SABS ECE R 72) 1 1 1 SANS 20073:1988/ECE R73:1988. Ed. Ed. 2 1 1 1 SANS 20076:1988/ECE R76:1988. Rev 1 1 Uniform provisions concerning the approval of special warning lamps for power-driven vehicles and their trailers Uniform provisions concerning I. Ed. IDT. IDT. IDT. Ed. 2 (SABS ECE R 56) SANS 20057:1995/ECE R57:1995. Ed. IDT. approval of a vehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsion system with regard to the installation of such equipment Uniform provisions concerning the approval of rear marking plates for slow-moving vehicles (by construction) and their trailers Uniform provisions concerning the approval of rear marking plates for heavy and long vehicles Uniform provisions concerning the approval of motor cycle headlamps emitting an asymmetrical passing beam and a driving beam and equipped with halogen filament lamps (HS1) Uniform provisions concerning the approval of goods vehicles. IDT. 1 1 SANS 20089:2006/ECE R89:1993. Ed. 1 (SABS ECE R 80) 1 SANS 20081:1989/ECE R81:1989. 1 (SABS ECE R 81) 1 SANS 20082:1989/ECE R82:1989. Ed. Ed. 2 2 SANS 20098:2007/ECE R98:2005. 1 (SABS ECE R 82) SANS 20083:2007/ECE R83:2005. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 20078:2008/ECE R78:2007. Ed. 1 1 2 1 SANS 20086:1993/ECE R86:1993. Ed. 1 1 SANS 20090:2008/ECE R90:2001. Rev 3 (SABS ECE R 83) SANS 20084:2004/ECE R84:1991. 2 3 SANS 20091:2007/ECE R91:2003. Ed. IDT. IDT. 2 1 1 SANS 20088:2007/ECE R88:1993. IDT. IDT. Rev 1 2 1 SANS 20096:2009/ECE R96:2006. Rev 1 Edition Title 2 Uniform provisions concerning the approval of vehicles of categories L1. IDT. with regard to the installation of rear-view mirrors on handlebars Uniform provisions concerning the approval of moped headlamps equipped with filament halogen lamps (HS2 lamps) Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements Uniform provisions concerning the approval of passenger cars equipped with an internal combustion engine with regard to the measurement of fuel consumption Uniform provisions concerning the approval of agricultural or forestry tractors with regard to the installation of lighting and light-signalling devices Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles Uniform prescriptions for approval of: I Vehicles with regard to limitation of their maximum speed or their adjustable speed limitation function II Vehicles with regard to the installation of a speed limiting device (SLD) or adjustable speed limitation device (ASLD) of an approved type III Speed limitation devices (SLD) and adjustable speed limitation device (ASLD) Replacement brake lining assemblies and drum brake linings for power-driven vehicles and their trailers Uniform provisions concerning the approval of sidemarker lamps for motor vehicles and their trailers Uniform provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a frontal collision Uniform provisions concerning the approval of compression ignition (C. L2. Ed. Ed. MOD. Ed. Ed. Ed. Ed. IDT. Ed. IDT. Rev 1 (SABS ECE R 98) SANS 20099:2002/ECE R99:2001. Ed. L3. Ed. L4 and L5 with regard to braking Uniform provisions concerning the approval of seats of large passenger vehicles and of these vehicles with regard to the strength of the seats and their anchorages Uniform provisions concerning the approval of rearview mirrors and of two-wheeled power-driven vehicles with or without side car. IDT. Rev 1 (SABS ECE R 91) SANS 20094:2009/ECE R94:2007. 1 (SABS ECE R 86) SANS 20087:2005/ECE R87:2003. IDT. IDT. IDT. IDT.I. IDT.) engines to be installed in agricultural and forestry tractors and in non-road mobile machinery with regard to the emissions of pollutants by the engine Uniform provisions concerning the approval of motor vehicle headlamps equipped with gas-discharge light sources Uniform provisions concerning the approval of gasdischarge light sources for use in approved gasdischarge lamp units of power-driven vehicles SANS 20080:1989/ECE R80:1989. 2 (SABS ECE R 99) 2 2 Page 235 . IDT. 1 (SABS ECE R 104) SANS 20107:2006/ECE R107:2004. Ed. and of categories M1 and N1 vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range Uniform provisions concerning the approval of retroreflective markings for vehicles of category M. or powered by a hybrid electric power train with regard to the measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range. IDT. Ed.Sheet and strip . IDT. IDT.Test methods for footwear Personal protective equipment . 1 1 SANS 20252:2006/ISO 20252:2006. 1 1 SANS 20112:2003/ECE R112:2001. Ed.Safety footwear SANS 20104:1998/ECE R104:1998. Rev 1 1 2 SANS 20108:1998/ECE R108:1998. Ed. IDT. IDT. Ed. 1 1 SANS 20482:2004/ISO 20482:2003. II. 1 1 Page 236 . 1 1 SANS 20345:2008/ISO 20345:2004. N and O Uniform provisions concerning the approval of category M2 or M3 vehicles with regard to their general construction Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers Uniform provisions concerning the approval of: I.Electronic health record Definition. 1 1 Metallic materials . 1 1 SANS 20712-1:2008/ISO 20712-1:2008. IDT. Ed. Ed.Vocabulary and service requirements Personal protective equipment . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 20101:2006/ECE R101:2005. Ed. Vehicles with regard to the installation of specific components of an approved type for the use of compressed natural gas (CNG) in their propulsion system Uniform provisions concerning the approval of tank vehicles of categories N and O with regard to rollover stability Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps Uniform provisions concerning the approval of cornering lamps for power-driven vehicles Uniform provisions concerning the approval of wheels for passenger cars and their trailers Market. 1 1 SANS 20119:2008/ECE R119:2005. Ed. Ed. Ed. 1 1 SANS 20344:2008/ISO 20344:2004.Erichsen cupping test Health informatics . IDT. Ed. 1 1 1 1 SANS 20111:2004/ECE R111:2001. IDT. Ed. Ed. Specific components of motor vehicles using compressed natural gas (CNG) in their propulsion system. 1 1 SANS 20124:2007/ECE R124:2007. Ed. 1 (SABS ECE R 109) SANS 20110:2003/ECE R110:2001. IDT. IDT. Rev 2 Edition Title 1 Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only. IDT. scope and context Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas SANS 20514:2007/ISO/TR 20514:2005. IDT. 1 (SABS ECE R 108) SANS 20109:1998/ECE R109:1998. IDT. opinion and social research . IDT. Ed. IDT. Ed.Structuredwall piping systems of unplasticized poly(vinyl chloride) (PVC-U). Ed.Microbiology .A reference ontology for the interchange of cultural heritage information Plastics piping systems for non-pressure underground drainage and sewerage . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 20807:2004/ISO 20807:2004. Ed. IDT. IDT.Test methods for stiffeners and toepuffs Mechanical characteristics Hard coal . IDT. IDT. 1 1 SANS 21149:2008/ISO 21149:2006. Ed.Counting practices manual Multilayer piping systems for hot and cold water installations inside buildings Part 1: General Multilayer piping systems for hot and cold water installations inside buildings Part 2: Pipes Multilayer piping systems for hot and cold water installations inside buildings Part 3: Fittings Multilayer piping systems for hot and cold water installations inside buildings Part 5: Fitness for purpose of the system Information and documentation . Ed. Ed. IDT. IDT. IDT.International Standard Text Code (ISTC) Information and documentation .General instructions for microbiological examination Cosmetics . 1 1 SANS 21148:2008/ISO 21148:2005.Microbiology . IDT. 1 1 1 SANS 20904:2007/ISO 20904:2006.Enumeration and detection of aerobic mesophilic bacteria SANS 20926:2004/ISO/IEC 20926:2003.Determination of dust/moisture relationship for coal Software engineering . Type A Plastics piping systems for non-pressure underground drainage and sewerage . Ed.Sampling of slurries SANS 20825:1993 (SABS 20825) SANS 20864:2009/ISO 20864:2004. Ed.1 Unadjusted functional size measurement method . 1 1 SANS 20905:2006/ISO 20905:2004. 1 Edition Title 1 Non-destructive testing . 1 1 SANS 21138-1:2008/ISO 21138-1:2007.IFPUG 4. 1 1 SANS 21127:2009/ISO 21127:2006. IDT.Structuredwall piping systems of unplasticized poly(vinyl chloride) (PVC-U). Type B Cosmetics . 1 1 SANS 21003-3:2008/ISO 21003-3:2007. Ed. Ed. 1 1 Coal preparation .Qualification of personnel for limited applications of non-destructive testing Environmentally acceptable hand dishwashing and light duty detergent (liquid) Footwear . polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface. 1 1 SANS 21138-2:2008/ISO 21138-2:2007. 1 1 SANS 21003-1:2008/ISO 21003-1:2007. IDT. 1 1 SANS 21003-5:2008/ISO 21003-5:2007. Ed. 1 1 SANS 21138-3:2008/ISO 21138-3:2007. 1 1 Page 237 . Ed. IDT. IDT. polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with nonsmooth external surface. 1 1 SANS 21047:2009/ISO 21047:2009. Ed. fittings and system Plastics piping systems for non-pressure underground drainage and sewerage . IDT. Ed. Ed. IDT. IDT. 1 1 SANS 21003-2:2008/ISO 21003-2:2007.Structuredwall piping systems of unplasticized poly(vinyl chloride) (PVC-U). polypropylene (PP) and polyethylene (PE) Part 1: Material specifications and performance criteria for pipes. Ed. Capability Maturity Model (SSE-CMM) Food safety management systems . IDT. 1 1 SANS 21572:2005/ISO 21572:2004.Overview and guidance Practical guidelines for socioterminology SANS 22134:2008/ISO 22134:2007.Guidance on the application of ISO 22000:2005 Traceability in the feed and food chain .Requirements for bodies providing audit and certification of food safety management systems Food safety management systems . IDT. 1 1 Terminology products and services . 1 1 SANS 22004:2006/ISO/TS 22004:2005. Ed. 1 1 SANS 21827:2005/ISO/IEC 21827:2002. Ed. Ed. IDT. Ed. Ed.Systems security engineering . IDT. Ed. Ed. IDT. 1 1 SANS 21747:2008/ISO 21747:2006. Ed. IDT. IDT. Ed. 1 1 SANS 22000:2005/ISO 22000:2005. 1 1 SANS 22005:2009/ISO 22005:2007.General principles and basic requirements for system design and implementation Dentistry . Ed. IDT. Ed. 1 1 SANS 22128:2009/ISO 22128:2008. IDT. 1 1 SANS 22003:2007/ISO/TS 22003:2007.Methods for the detection of genetically modified organisms and derived products .Methods of analysis for the detection of genetically modified organisms and derived products . IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 21183-1:2006/ISO 21183-1:2005. IDT. Ed. IDT. 1 1 Public key infrastructure for financial services Practices and policy framework Hard coal and coke . Ed. IDT. 1 1 SANS 21188:2006/ISO 21188:2006. 1 1 SANS 21487:2009/ISO 21487:2006. Ed. Ed.Artificial teeth for dental prostheses SANS 21398:2007/ISO 21398:2007.Nucleic acid extraction Foodstuffs .Guidance to the inspection of mechanical sampling systems Small craft . 1 Edition Title 1 Light conveyor belts Part 1: Principal characteristics and applications Light conveyor belts Part 2: List of equivalent terms SANS 21183-2:2006/ISO 21183-2:2005. Ed. 1 1 SANS 21567:2005/ISO 21567:2004. IDT. Ed. IDT. IDT. IDT. 1 1 Page 238 . 1 1 SANS 21571:2006/ISO 21571:2005.Protein based methods Statistical methods .Requirements for any organization in the food chain Food safety management systems .Process performance and capability statistics for measured quality characteristics Information technology . 1 1 SANS 21528-1:2005/ISO 21528-1:2004. Ed. IDT. 1 1 SANS 21528-2:2005/ISO 21528-2:2004. Ed. 1 1 SANS 22112:2008/ISO 22112:2005.Permanently installed petrol and diesel fuel tanks Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 1: Detection and enumeration by MPN technique with pre-enrichment Microbiology of food and animal feeding stuffs Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 2: Colonycount method Microbiology of food and animal feeding stuffs Horizontal method for the detection of Shigella spp Foodstuffs . Ed.Privacy impact assessment SANS 22307:2008/ISO 22307:2008.Requirements for personal financial planners Financial services . Ed. 1 1 SANS 22514-3:2009/ISO 22514-3:2008.Records management processes . Ed. Ed. Ed. Ed. 1 SANS 22674:2008/ISO 22674:2006. Ed. Ed. IDT. Ed.Microbiology . IDT. IDT. IDT. Ed.General procedures for preparing and conditioning test pieces for physical test methods Elastomeric seals . IDT. 1 1 SANS 22775:2009/ISO 22775:2004. 1 1 SANS 23081-1:2006/ISO 23081-1:2006. IDT.Thermoplastic elastomers Cranes . Ed. IDT.Polyethylene of raised temperature resistance (PE-RT) Part 1: General Plastics piping systems for hot and cold water installations . 1 1 SANS 23814:2009/ISO 23814:2009. 1 1 Information and documentation . IDT. 1 1 SANS 22411:2009/ISO/TR 22411:2008. IDT.Test methods for accessories: Metallic accessories . 1 Edition Title 1 Personal financial planning . 1 1 SANS 22310:2006/ISO 22310:2006. IDT. Ed. 1 1 1 SANS 22718:2009/ISO 22718:2006.Corrosion resistance Document management . Ed. IDT. Ed. IDT. IDT. IDT. Ed.Electronic content/document management (CDM) data interchange format Information and documentation . 1 1 SANS 22391-2:2008/ISO 22391-2:2007. IDT. 1 2 SANS 23529:2006/ISO 23529:2004. IDT. IDT.Detection of Staphylococcus aureus Footwear . 1 1 SANS 22938:2009/ISO 22938:2008.Requirements for materials for pipe joint seals used in water and drainage applications .Polyethylene of raised temperature resistance (PE-RT) Part 3: Fittings Plastics piping systems for hot and cold water installations . Ed.Polyethylene of raised temperature resistance (PE-RT) Part 5: Fitness for purpose of the system Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures Dentistry . 1 1 SANS 22514-4:2008/ISO/TR 22514-4:2007. 1 1 SANS 23711:2008/ISO 23711:2003.Polyethylene of raised temperature resistance (PE-RT) Part 2: Pipes Plastics piping systems for hot and cold water installations . 1 1 Page 239 .Guidelines for standards drafters for stating records management requirements in standards Plastics piping systems for hot and cold water installations .Metallic materials for fixed and removable restorations and appliances Cosmetics .Competency requirements for crane inspectors SANS 22391-1:2008/ISO 22391-1:2007. 1 1 SANS 22391-3:2008/ISO 22391-3:2007.Metadata for records Part 1: Principles Rubber . Ed. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 22222:2006/ISO 22222:2005. 1 1 SANS 22391-5:2008/ISO 22391-5:2007. NESMA functional size measurement method version 2.Method of specifying image reproduction of colour devices by digital and analog test charts Information technology . 1 1 Document management .Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components Information technology .Additional requirements for automated functions on trucks Industrial trucks .Radio frequency identification for item management . 1 1 SANS 24710:2008/ISO/IEC TR 24710:2005.Conformance testing for the biometric application programming interface (BioAPI) Part 1: Methods and procedures Information technology .1 . 1 1 Document management . 2 1 SANS 24713-1:2009/ISO/IEC 24713-1:2008. 1 1 SANS 24570:2005/ISO/IEC 24570:2005. IDT. 1 Edition Title 1 Cranes . Ed. 1 1 SANS 24709-2:2007/ISO/IEC 24709-2:2007. 1 1 SANS 24711:2008/ISO/IEC 24711:2007. IDT.Definitions and counting guidelines for the application of Function Point Analysis Language resource management . Ed. 1 1 SANS 24709-1:2007/ISO/IEC 24709-1:2007.Dimensions for reels used for 16 mm and 35 mm microfilm Software engineering . 1 1 SANS 24705:2007/ISO/IEC TR 24705:2005.6 (PDF/E-1) Intelligent transport systems .Office machines . Ed. 1 1 SANS 24517-1:2008/ISO 24517-1:2008.Mercury and alloys for dental amalgam SANS 24014-1:2007/ISO 24014-1:2007. IDT. Ed. Ed.Training of slingers and signallers SANS 23868:2008/ISO 23868:2008. Ed.Specifications and test methods for operator restraint systems Part 1: Lap-type seat belts Dentistry . IDT. IDT. IDT. IDT. IDT.Engineering document format using PDF Part 1: Use of PDF 1. 1 1 SANS 24234:2008/ISO 24234:2004. IDT.Biometric profiles for interoperability and data interchange Part 2: Physical access control for employees at airports SANS 24535:2007 1 SANS 24537:2007/ISO 24537:2007. Ed.Framework for electronic registration and identification of vehicles using passive radio frequency identification (RFID) Micrographics . Ed. 1 1 SANS 24613:2009/ISO 24613:2008. Ed.Monitoring and verification of information stored on 130 mm optical media Public transport . Ed.Lexical markup framework (LMF) Information technology . IDT. Ed. 1 1 SANS 24135-1:2007/ISO 24135-1:2006. IDT.Interoperable fare management system Part 1: Architecture Industrial trucks . 1 1 Page 240 . Ed. 1 1 SANS 24713-2:2009/ISO/IEC 24713-2:2008.Machines for colour image reproduction . IDT.Conformance testing for the biometric application programming interface (BioAPI) Part 2: Test assertions for biometric service providers Information technology . IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 23853:2006/ISO 23853:2004. Ed. IDT. Ed. IDT. IDT. Ed.Biometric profiles for interoperability and data interchange Part 1: Overview of biometric systems and biometric profiles Information technology . IDT. 1 1 SANS 24134:2007/ISO 24134:2006. Ed. Ed. 1 1 SANS 25012:2009/ISO/IEC 25012:2008. Ed. IDT. IDT.Jurisdictional and societal considerations for commercial applications Part 1: General guidance Information technology . 1 1 Page 241 .Software product quality requirements and evaluation (SQuaRE) . 1 1 SANS 25001:2008/ISO/IEC 25001:2007. 1 1 SANS 24778:2008/ISO/IEC 24778:2008. Ed. 1 1 SANS 24729-1:2009/ISO/IEC TR 24729-1:2008. IDT. 1 Ed.Automatic identification and data capture techniques . 1 1 SANS 24728:2008/ISO/IEC 24728:2006.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Information technology .Data quality model Software engineering . IDT.Biometrics tutorial SANS 24714-1:2009/ISO/IEC TR 24714-1:2008. 1 1 Software engineering . IDT.Security techniques Guidelines for information and communications technology disaster recovery services Software engineering . IDT. Ed.Guidelines for process description Information technology . Ed.Aztec Code bar code sympology specification Software Engineering . IDT. IDT.MicroPDF417 bar code symbology specification Information technology .Life cycle management . IDT. Ed. Ed. 1 SANS 24729-2:2009/ISO/IEC TR 24729-2:2008.Multimodal and other multibiometric fusion Information technology .Guide to SQuaRE Software engineering .Planning and management Software engineering .Software product quality requirements and evaluation (SQuaRE) .Implementation guidelines Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C Information technology . 1 Ed. 1 1 SANS 24722:2007/ISO/IEC TR 24722:2007. Ed. 1 1 SANS 24730-2:2008/ISO/IEC 24730-2:2006. 1 1 SANS 24741:2009/ISO/IEC TR 24741:2007. IDT. IDT.Real-time locating systems (RTLS) Part 1: Application program interface (API) Information technology . Ed.Implementation guidelines Part 2: Recycling and RFID tags Information technology .Biometrics .Radio frequency identification for item management .Automatic identification and data capture techniques . 1 SANS 24720:2009/ISO/IEC TR 24720:2008. 1 1 SANS 24774:2008/ISO/IEC TR 24774:2007.Real-time locating systems (RTLS) Part 2: 2. IDT. 1 1 SANS 24744:2008/ISO/IEC 24744:2007.Biometrics . 1 1 SANS 24773:2009/ISO/IEC 24773:2008.Automatic identification and data capture techniques . 1 Ed. Ed. Ed. 1 1 SANS 25020:2008/ISO/IEC 25020:2007.Software product Quality Requirements and Evaluation (SQuaRE) Measurement reference model and guide SANS 24762:2008/ISO/IEC 24762:2008. IDT.Software product Quality Requirements and Evaluation (SQuaRE) .Comparison framework Software and systems engineering . IDT. Ed.Radio frequency identification for item management . IDT. 1 SANS 24730-1:2008/ISO/IEC 24730-1:2006. 1 1 SANS 25000:2007/ISO/IEC 25000:2005. Ed. IDT. Ed.Certification of software engineering professionals .4 GHz air interface protocol Information technology .Metamodel for development methodologies Information technology . IDT.Guidelines for direct part marking (DPM) Information technology . Ed. IDT. Ed. Ed. 1 1 SANS 25051:2007/ISO/IEC 25051:2006.Requirements for designers and developers of user documentation Systems engineering .Jib cranes . use and maintenance requirements and recommendations Exhibitions. IDT. manufacturing. 1 1 1 SANS 27668-2:2009/ISO 27668-2:2009. IDT. IDT.Security techniques . IDT. IDT. Ed. 1 1 SANS 27001:2006/ISO/IEC 27001:2005. 1 1 SANS 27011:2009/ISO/IEC FDIS 27011:2008. IDT. Ed. Ed. IDT.Security techniques Information security management systems Requirements Information technology . Ed. IDT. 1 1 SANS 26300:2008/ISO/IEC 26300:2006. fairs and conventions Part 2: Measurement procedures for statistical purposes Information technology . shows. IDT. Ed. IDT. design and performance Information technology .International standards for design.Sector-specific quality management systems Requirements for product and service supply organizations SANS 27687:2008/ISO/TS 27687:2008. Ed. fairs and conventions Part 1: Vocabulary Exhibitions.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Software engineering .Nanoparticle.Software product Quality Requirements and Evaluation (SQuaRE) . 1 1 SANS 29001:2009/ISO/TS 29001:2007. 1 1 SANS 25639-1:2009/ISO 25639-1:2008. 1 1 SANS 28003:2008/ISO 28003:2007.Userapplied labels for syringes containing drugs used during anaesthesia .Code of practice for information security management Information technology . Ed.Quality measure elements Software engineering . shows.Information security management guidelines for telecommunications Gel ink ball pens and refills Part 1: General use SANS 25021:2008/ISO/IEC TR 25021:2007. 1 1 SANS 26514:2009/ISO/IEC 26514:2008. 1 1 SANS 26825:2009/ISO 26825:2008. 1 1 SANS 27002:2008/ISO/IEC 27002:2005. 1 1 SANS 25030:2008/ISO/IEC 25030:2007. IDT. Ed. Ed.Quality requirements Software engineering . nanofibre and nanoplate Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management systems Petroleum. Ed. 2 2 Page 242 . 1 SANS 27668-1:2009/ISO 27668-1:2009. 1 1 Gel ink ball pens and refills Part 2: Documentary use (DOC) Nanotechnologies . 1 1 SANS 25639-2:2009/ISO 25639-2:2008. IDT.Open Document Format for Office Applications (OpenDocument) v1. IDT. 1 1 SANS 26702:2008/ISO/IEC 26702:2007. IDT. Ed. Ed. 1 1 SANS 25599:2008/ISO/TR 25599:2005. Ed.Software product quality requirements and evaluation (SQuaRE) Requirements for quality of Commercial Off-TheShelf (COTS) software product and instructions for testing Cranes . Ed. IDT.Terminology and definitions for nano-objects . IDT.Application and management of the systems engineering process Anaesthetic and respiratory equipment . Ed.Software product Quality Requirements and Evaluation (SQuaRE) . petrochemical and natural gas industries . Ed. Ed. IDT.Colours.0 Systems and software engineering . IDT. 1 1 SANS 50028-1:2004/EN 10028-1:2000. IDT. IDT. 1 1 SANS 50025-6:2009/EN 10025-6:2004. 2 (SABS EN 54-7) 2 1 1 1 2 2 Page 243 . Ed. 1 1 SANS 50025-2:2009/EN 10025-2:2004. IDT. Ed. IDT. 1 1 SANS 38500:2009/ISO/IEC 38500:2008. Ed. knowledge. Ed. Ed. 2 1 SANS 50028-7:2005/EN 10028-7:2000. Ed. MOD. IDT. IDT. IDT.TermBase eXchange (TBX) Document management . IDT. Ed. IDT. Ed. 2 (SABS EN 54-1) SANS 50054-2:1997/EN 54-2:1997. Ed. Ed. IDT. IDT (SABS EN 54-2) SANS 50054-3:2001/EN 54-3:2001. 1 (SABS EN 54-4) SANS 50054-5:2000/EN 54-5:2000. 1 1 SANS 50025-3:2009/EN 10025-3:2004. 1 1 Systems and software engineering . 1 1 SANS 50025-4:2009/EN 10025-4:2004. 2 (SABS EN 54-5) SANS 50054-7:2000/EN 54-7:2000.FiSMA 1. Ed. transmitted light or ionization SANS 50025-1:2009/EN 10025-1:2004. IDT.7 Corporate governance of information technology SANS 30042:2009/ISO 30042:2008.Portable document format Part 1: PDF 1. IDT. Ed. Ed. 1 1 SANS 42010:2008/ISO/IEC 42010:2007. 1 1 SANS 50054-1:2009/EN 54-1:1996. IDT. 1 Edition Title 1 Information technology . IDT. 1 (SABS EN 54-3) SANS 50054-4:1997/EN 54-4:1997. IDT. 1 1 SANS 32000-1:2008/ISO 32000-1:2008. IDT. and content .1 functional size measurement method Systems to manage terminology. Ed.Software and systems engineering .Point detectors using scattered light. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 29881:2009/ISO/IEC 29881:2008.Point detectors Fire detection and fire alarm systems Part 7: Smoke detectors . Ed. 1 1 SANS 50025-5:2009/EN 10025-5:2004.Recommended practice for architectural description and softwareintensive systems Hot rolled products of structural steels Part 1: General technical delivery conditions Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels Hot rolled products of structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition Flat products made of steels for pressure purposes Part 1: General requirements Flat products made of steels for pressure purposes Part 7: Stainless steels Fire detection and fire alarm systems Part 1: Introduction Fire detection and fire alarm systems Part 2: Control and indicating equipment Fire detection and fire alarm systems Part 3: Fire alarm devices .Sounders Fire detection and fire alarm systems Part 4: Power supply equipment Fire detection and fire alarm systems Part 5: Heat detectors . IDT. Ed. quality control Respiratory protective devices . Ed. 1 1 SANS 50081-72:2005/EN 81-72:2003. testing.Standards available in electronic format (PDF) October 2009 SANS Number SANS 50054-11:2001/EN 54-11:2001. Ed. 1 (SABS EN 54-11) SANS 50060:1989/EN 50060:1989. IDT. Ed. half mask or mouthpiece assembly .Particular applications for passenger and goods lifts Part 70: Accessibility to lifts for persons including persons with disability Safety rules for the construction and installation of lifts . testing.Fresh air hose breathing apparatus for use with full face mask.Half masks and quarter masks . IDT (SABS EN 138) 1 1 2 1 Respiratory protective devices . IDT (SABS EN 137) SANS 50138:1994/EN 138:1994. 2 (SABS EN 124) SANS 50132:1998/EN 132:1998. IDT. 2 (SABS EN 140) SANS 50141:2003/EN 141:2000. IDT. Ed. IDT. IDT. IDT. IDT. Ed.Self-contained open-circuit compressed air breathing apparatus Requirements. IDT. type testing. marking Respiratory protective devices . 1 1 SANS 50116:2007/EN 116:1997. 2 (SABS EN 141) 1 2 Page 244 .Determination of cold filter plugging point Gully tops and manhole tops for vehicular and pedestrian areas . 3 (SABS EN 132) SANS 50133:2003/EN 133:2001. IDT. marking Respiratory protective devices . testing. Ed.List of equivalent terms Respiratory protective devices .Requirements. marking.Gas filters and combined filters . 1 1 1 SANS 50081-70:2004/EN 81-70:2003.Classification 1 1 SANS 50081-2:1998/EN 81-2:1998. Ed. IDT (SABS EN 134) SANS 50135:1998/EN 135:1998. marking 1 1 1 1 SANS 50140:1998/EN 140:1998. marking Respiratory protective devices . IDT.Requirements.Full face masks Requirements.Requirements. marking Respiratory protective devices . Ed. 3 (SABS EN 133) SANS 50134:1998/EN 134:1998.Definitions of terms and pictograms Respiratory protective devices .Particular applications for passenger and goods lifts Part 72: Fire fighters lifts Safety rules for the construction and installation of lifts . Ed. Ed. IDT. IDT (SABS EN 50060) SANS 50081-1:2004/EN 81-1:1998. testing. Ed. IDT. 3 (SABS EN 135) SANS 50136:1998/EN 136:1998. 1 1 SANS 50081-80:2005/EN 81-80:2003. IDT. Ed. Ed. IDT. IDT.Nomenclature of components Respiratory protective devices . testing. 1 (SABS EN 136) SANS 50137:1993/EN 137:1993. Ed. Ed. 1 1 SANS 50124:1994/EN 124:1994. 2 (SABS EN 81-2) SANS 50081-3:2005/EN 81-3:2000.Existing lifts Part 80: Rules for the improvement of safety of existing passenger and goods lifts Diesel and domestic heating fuels .Design requirements. 2 Edition Title 1 Fire detection and fire alarm systems Part 11: Manual call points Power sources for manual arc welding with limited duty Safety rules for the construction and installation of lifts Part 1: Electric lifts Safety rules for the construction and installation of lifts Part 2: Hydraulic lifts Safety rules for the construction and installation of lifts Part 3: Electric and hydraulic service lifts Safety rules for the construction and installation of lifts . marking Respiratory protective devices .Requirements. marking Personal eye-protection .Self-contained closed-circuit compressed oxygen breathing apparatus for special use . Ed.Mouthpiece assemblies .Filtering half masks to protect against particles . Ed. MOD (SABS EN 196-6) SANS 50196-7:2009/EN 196-7:2007. 2 (SABS EN 196-5) SANS 50196-6:1989/EN 196-6:1989.Gas cylinder valves Part 1: Thread connections for insert connector Respiratory protective devices . marking Respiratory protective devices . Ed. 2 (SABS EN 148-2) SANS 50148-3:2003/EN 148-3:1999. 2 (SABS EN 148-1) SANS 50148-2:2003/EN 148-2:1999. IDT. IDT. 2 (SABS EN 196-7) SANS 50197-1:2000/EN 197-1:2000.Threads for facepieces Part 3: Thread connection M 45 x 3 Respiratory protective devices .Transmittance requirements and recommended utilisation Methods of testing cement Part 1: Determination of strength Methods of testing cement Part 2: Chemical analysis of cement Methods of testing cement Part 3: Determination of setting times and soundness Methods of testing cement Part 4: Quantitative determination of constituents Methods of testing cement Part 5: Pozzolanicity test for pozzolanic cement Methods of testing cement Part 6: Determination of fineness Methods of testing cement Part 7: Methods of taking and preparing samples of cement Cement Part 1: Composition. testing. 2 (SABS EN 196-3) SANS 50196-4:1993/ENV 196-4:1993. testing. Ed. Ed. 2 (SABS EN 142) SANS 50143:2003/EN 143:2000. Ed. 1 (SABS EN 197-1) SANS 50197-2:2000/EN 197-2:2000. Ed.Safety requirements. marking Respiratory protective devices . Ed. IDT. testing. Ed.Compressed oxygen or compressed oxygen-nitrogen type Requirements.Requirements. IDT. 2 (SABS EN 149) SANS 50169:1992/EN 169:1992. Ed.Particle filters Requirements. 2 (SABS EN 196-1) SANS 50196-2:2006/EN 196-2:2005. 1 (SABS EN 197-2) 2 2 2 2 1 2 2 2 1 2 1 2 1 1 Page 245 .Threads for facepieces Part 1: Standard thread connection Respiratory protective devices . IDT. IDT. 2 (SABS EN 143) SANS 50144-1:2003/EN 144-1:2000. IDT (SABS EN 145-2) 1 SANS 50148-1:2003/EN 148-1:1999. IDT.Self-contained closed-circuit breathing apparatus . IDT (SABS EN 169) SANS 50196-1:2006/EN 196-1:2005. IDT. testing. IDT. Ed. IDT. Ed. 2 (SABS EN 148-3) SANS 50149:2003/EN 149:2001. 2 (SABS EN 144-1) SANS 50144-2:1998/EN 144-2:1998.Outlet connections Respiratory protective devices . MOD. Ed. specifications and conformity criteria for common cements Cement Part 2: Conformity evaluation 2 2 1 1 SANS 50145-2:1992/EN 145-2:1992. IDT (SABS EN 144-2) SANS 50145:1997/EN 145:1997.Gas cylinder valves .Filters for welding and related techniques . marking Respiratory protective devices . Ed.Threads for facepieces Part 2: Centre thread connection Respiratory protective devices . 2 (SABS EN 145) Edition Title 2 Respiratory protective devices . Ed. IDT. IDT. IDT. IDT. testing. 2 (SABS EN 196-2) SANS 50196-3:2006/EN 196-3:2005.Standards available in electronic format (PDF) October 2009 SANS Number SANS 50142:2003/EN 142:2002. MOD (SABS ENV 196-4) SANS 50196-5:2009/EN 196-5:2005. Open-circuit self-contained compressed air diving apparatus . 1 (SABS EN 286-4) 1 SANS 50295-1:1991/EN 295-1:1991. Ed. marking Simple unfired pressure vessels designed to contain air or nitrogen Part 1: Pressure vessels for general purposes Simple unfired pressure vessels designed to contain air or nitrogen Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers Simple unfired pressure vessels designed to contain air or nitrogen Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock Simple unfired pressure vessels designed to contain air or nitrogen Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 1: Requirements Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 2: Quality control and sampling Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 3: Test methods Particleboards . IDT. IDT.Requirements. testing. testing. IDT (SABS EN 198) SANS 50250:2003/EN 250:2000. IDT (SABS EN 269) SANS 50270:1994/EN 270:1994. Ed. IDT. IDT (SABS EN 270) SANS 50286-1:1998/EN 286-1:1998. 2 (SABS EN 286-1) SANS 50286-2:1992/EN 286-2:1992. 1 (SABS 50352-1) SANS 50352-2:2008/EN 352-2:1993.Compressed air line breathing apparatus incorporating a hood Requirements. 1 1 1 1 1 SANS 50341:1992/EN 341:1992. IDT. IDT. Ed. IDT.Safety requirements and testing Part 3: Ear-muffs attached to an industrial safety helmet Hearing protectors .Safety requirements and testing Part 2: Ear-plugs Hearing protectors . 1 (SABS 50352-2) SANS 50352-3:2008/EN 352-3:1996. Ed. IDT (SABS EN 295-1) SANS 50295-2:1991/EN 295-2:1991.01 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 50198:1987/EN 198:1987. MOD. 1 1 Page 246 . IDT (SABS EN 295-3) SANS 50312:2007/EN 312:2003.Safety requirements and testing Part 6: Ear-muffs with electrical audio input 1. 1 (SABS EN 286-3) 1 SANS 50286-4:1994/EN 286-4:1994.Safety requirements and testing Part 1: Ear-muffs Hearing protectors . MOD. Ed. 1 (SABS EN 286-2) Edition Title 1 Specification for finished baths for domestic purposes made of acrylic material Respiratory equipment . IDT. IDT (SABS EN 295-2) SANS 50295-3:1991/EN 295-3:1991. 1 (SABS 50352-3) SANS 50352-5:2005/EN 352-5:2002.01 1. Ed. Ed.Descender devices Hearing protectors . IDT. Ed. 1 1 Personal protective equipment against falls from a height . Ed.Powered fresh air hose breathing apparatus incorporating a hood Requirements. 1 (SABS EN 341) SANS 50352-1:2008/EN 352-1:1993.Specifications 2 1 1 1 1 SANS 50286-3:1994/EN 286-3:1994. 2 (SABS EN 250) SANS 50269:1994/EN 269:1994.01 1 SANS 50352-6:2005/EN 352-6:2002. Ed. Ed. MOD. marking Respiratory protective devices .Safety requirements and testing Part 5: Active noise reduction ear-muffs Hearing protectors . marking Respiratory protective devices . IDT. Ed. testing. Ed. Ed. marking Protective clothing for users of hand-held chain saws Part 1: Test rig for testing resistance to cutting by a chain saw Protective clothing for users of hand-held chain saws Part 2: Test methods for leg protectors Protective clothing for users of hand-held chain saws Part 5: Requirements for leg protectors Respiratory protective devices . IDT. 2 (SABS EN 362) SANS 50363:2003/EN 363:2002. 1 Edition Title 1 Hearing protectors . IDT. 2 (SABS EN 353-2) SANS 50354:2003/EN 354:2002. Ed. IDT. marking Respiratory protective devices . repair. IDT. IDT. Ed. 2 (SABS EN 363) SANS 50364:1992/EN 364:1992. 2 (SABS EN 361) SANS 50362:2008/EN 362:2004. 1 (SABS EN 381-2) SANS 50381-5:1995/EN 381-5:1995. marking and packaging Respiratory protective devices .Retractable type fall arresters Personal protective equipment against falls from a height .Safety requirements and testing Part 7: Level-dependent ear-plugs Personal protective equipment against falls from a height . Ed. 1 (SABS EN 381-5) SANS 50402:2006/EN 402:2003. testing. IDT. Ed.Requirements. 2 (SABS EN 365) 2 2 2 2 1 2 SANS 50371:1992/EN 371:1992. IDT. Ed. 2 (SABS EN 355) SANS 50358:2008/EN 358:1999. 2 (SABS EN 353-1) SANS 50353-2:2003/EN 353-2:2002.Requirements.Guided type fall arresters including a rigid anchor line Personal protective equipment against falls from a height . IDT.Guided type fall arresters including a flexible anchor line Personal protective equipment against falls from a height .AX gas filters and combined filters against low boiling organic compounds . Ed.SX gas filters and combined filters against specific named compounds . IDT.Lanyards Personal protective equipment against falls from a height .Test methods Personal protective equipment against falls from a height .Standards available in electronic format (PDF) October 2009 SANS Number SANS 50352-7:2005/EN 352-7:2002. periodic examination.Connectors Personal protective equipment against falls from a height . Ed. IDT. 1 (SABS EN 381-1) SANS 50381-2:1995/EN 381-2:1995.Belts for work positioning and restraint and work positioning lanyards Personal protective equipment against falls from a height . testing. IDT.Energy absorbers Personal protective equipment for work positioning and prevention of falls from a height .Full body harnesses Personal protective equipment against falls from a height .General requirements for instructions for use. Ed. 2 (SABS EN 402) 1 1 1 1 1 2 Page 247 . IDT (SABS EN 372) SANS 50381-1:1993/EN 381-1:1993. marking SANS 50353-1:2003/EN 353-1:2002. IDT (SABS EN 371) SANS 50372:1992/EN 372:1992. IDT. 2 (SABS EN 354) SANS 50355:2003/EN 355:2002. 2 (SABS EN 358) 2 2 2 2 2 SANS 50360:2003/EN 360:2002. IDT (SABS EN 364) SANS 50365:2008/EN 365:2004. IDT. IDT. testing. maintenance. Ed. Ed. 2 (SABS EN 360) SANS 50361:2003/EN 361:2002. Ed. Ed.Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape . Ed.Fall arrest systems Personal protective equipment against falls from a height .Requirements. IDT. 2 (SABS EN 403) SANS 50404:2007/EN 404:2005. IDT. 2 (SABS EN 572-5) SANS 50575:1995/EN 575:1995. specifications and conformity criteria Masonry cement Part 2: Test methods 2 2 2 SANS 50413-2:2006/EN 413-2:2005.Requirements and test methods Mountaineering equipment . IDT. IDT. 2 2 1 Helmets for fire fighting in buildings and other structures Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes Hearing protectors .Valved filtering half masks to protect against gases or gases and particles . Ed. Ed. Ed. 1 (SABS EN 575) 2 1 2 1 1 2 2 2 2 2 1 Page 248 . IDT. 1 1 SANS 50458:2008/EN 458:2004. IDT. fittings. care and maintenance . Ed. 2 (SABS EN 405) SANS 50413-1:2004/EN 413-1:2004. IDT.Master alloys produced by melting .Filter self-rescuer from carbon monoxide with mouthpiece assembly Respiratory protective devices .Basic soda lime silicate glass products Part 2: Float glass Glass in building .Standards available in electronic format (PDF) October 2009 SANS Number SANS 50403:2007/EN 403:2004. Ed. Ed. testing. 2 (SABS EN 413-2) SANS 50443:2008/EN 443:2008. IDT. IDT. Ed.Basic soda lime silicate glass products Part 4: Drawn sheet glass Glass in building . IDT. IDT. Ed. 2 (SABS EN 404) SANS 50405:2003/EN 405:2001. 2 (SABS EN 572-1) SANS 50572-2:2006/EN 572-2:2004. IDT. use. 2 (SABS EN 564) SANS 50565:2008/EN 565:2006.Safety requirements and test methods Glass in building .Basic soda lime silicate glass products Part 5: Patterned glass Aluminium and aluminium alloys . accessories and their joints for water pipelines . IDT. 2 2 1 SANS 50545:2003/EN 545:2002. Ed.Tape . IDT. marking Respiratory protective devices for self-rescue . IDT.Safety requirements and test methods Mountaineering equipment .Specifications SANS 50444:2009/EN 50444:2008. 2 (SABS EN 572-3) SANS 50572-4:2006/EN 572-4:2004. Ed.Requirements. 2 (SABS EN 572-2) SANS 50572-3:2006/EN 572-3:2004. 2 (SABS EN 566) SANS 50567:1997/EN 567:1997. Ed.Basic soda lime silicate glass products Part 3: Polished wire glass Glass in building . 2 (SABS EN 572-4) SANS 50572-5:2006/EN 572-5:2004.Basic soda lime silicate glass products Part 1: Definitions and general physical and mechanical properties Glass in building . Ed.Safety requirements and test methods Mountaineering equipment . Ed. IDT. 2 (SABS EN 458) SANS 50471:2006/EN 471:2003. Ed. IDT.Slings . Ed.Rope clamps . 2 (SABS EN 567) SANS 50572-1:2006/EN 572-1:2004.Recommendations for selection. Ed. Ed.Safety requirements and test methods Mountaineering equipment . 2 (SABS EN 565) SANS 50566:1997/EN 566:1997. testing. marking Masonry cement Part 1: Composition. IDT. Ed. IDT.Guidance document High-visibility warning clothing for professional use Test methods and requirements Ductile iron pipes. Ed. IDT. 1 Edition Title 2 Respiratory protective devices for self-rescue Filtering devices with hood for escape from fire Requirements. IDT. 2 (SABS EN 545) SANS 50564:1997/EN 564:1997.Accessory cord . Ed. Determination of tensile adhesive strength Ductile iron pipes.Terminology. classification 1 1 1 2 2 1 Elastomeric seals . Ed. Ed. Ed. 1 (SABS EN 818-6) 1 SANS 50858-1:2002/EN 858-1:2002. Ed.Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber Thermoplastics piping systems . Ed. IDT. tube and profiles Part 7: Seamless tubes. Ed.Test method for leaktightness under internal pressure of assemblies subjected to bending Gas welding equipment . 1 (SABS EN 858-1) 1 Page 249 . 2 1 SANS 50795:1996/EN 795:1996. IDT. IDT. performance and testing. Ed. Ed. Ed. IDT. IDT. IDT. tolerances on dimensions and form Specification for masonry units Part 4: Autoclaved aerated concrete masonry units Protection against falls from a height . Ed.Safety devices Part 1: Incorporating a flame (flashback) arrestor Plastics piping and ducting systems Thermoplastics pipes .Standards available in electronic format (PDF) October 2009 SANS Number SANS 50576:2008/EN 576:2003. IDT.Mechanical joints between fittings and polyolefin pressure pipes . IDT. 1 (SABS EN 795) SANS 50813:1997/EN 813:1997.Safety Part 6: Chain slings . IDT. IDT. 1 (SABS EN 712) Edition Title 2 Aluminium and aluminium alloys . IDT.Test method for resistance to pull-out under constant longitudinal force Plastics piping systems . accessories and their joints for sewerage application .Unalloyed aluminium ingots for remelting . IDT. 2 (SABS EN 601) SANS 50657:2009/EN 657:2005. 1 (SABS EN 813) SANS 50818-4:2007/EN 818-4:1996.Requirements and test methods Aluminium and aluminium alloys . IDT. IDT (SABS EN 582) SANS 50598:1994/EN 598:1994.Sit harnesses Short link chain for lifting purposes . 2 (SABS EN 657) SANS 50681-1:1996/EN 681-1:1996.Specifications Plastics piping systems . Ed.Extruded rod/bar. 1 (SABS EN 598) SANS 50601:2008/EN 601:2004.Anchor devices . IDT.Extruded rod/bar. marking and quality control 1 SANS 50713:1993/EN 713:1993. IDT.Requirements and testing Personal protective equipment for prevention of falls from a height . Ed. oil and petrol) Part 1: Principles of product design.Determination of the longitudinal reversion Aluminium and aluminium alloys .Safety Part 4: Chain slings . IDT. fittings. 1 1 SANS 50771-4:2007/EN 771-4:2003. Ed. Ed. Ed. 2 (SABS EN 576) SANS 50578:1993/EN 578:1993. Ed. 1 1 1 SANS 50755-7:2005/EN 755-7:1998.Castings Chemical composition of castings for use in contact with food Thermal spraying . 2 (SABS EN 681-1) SANS 50712:1993/EN 712:1993. 1 (SABS EN 578) SANS 50582:1993/EN 582:1993. IDT. IDT. 1 1 1 1 SANS 50818-6:2000/EN 818-6:2000. 1 (SABS EN 713) 1 SANS 50730-1:2004/EN 730-1:2002. 1 1 SANS 50743:1994/EN 743:1994. 1 (SABS EN 743) SANS 50755-2:2005/EN 755-2:1997. Ed.End-load bearing mechanical joints between pressure pipes and fittings .Plastics pipes and fittings Determination of the opacity Thermal spraying . Ed.Specification for information for use and maintenance to be provided by the manufacturer Separator systems for light liquids (e.g.Grade 8 Short link chain for lifting purposes . tube and profiles Part 2: Mechanical properties Aluminium and aluminium alloys . Ed.Requirements and test methods Chemicals used for treatment of water intended for human consumption .Standards available in electronic format (PDF) October 2009 SANS Number SANS 50858-2:2003/EN 858-2:2003. 1 1 SANS 50878:2008/EN 878:2004. Ed.Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches. 1 1 SANS 50868-3:2003/EN 868-3:1999. 1 1 SANS 50868-7:2003/EN 868-7:1999. 1 1 SANS 50868-6:2003/EN 868-6:1999. Ed.Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 3: Paper for use in the manufacture of paper bags (specified in SANS 50868-4/EN 868-4) and in the manufacture of pouches and reels (specified in SANS 50868-5/EN 868-5) . Ed. 2 1 SANS 50881:2007/EN 881:2004. Ed. Ed. Ed. IDT. Ed. 1 1 SANS 50868-8:2003/EN 868-8:1999. reels and lids . IDT. 1 1 SANS 50868-5:2003/EN 868-5:1999. Ed. Ed. 1 1 SANS 50868-9:2003/EN 868-9:2000. aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric) Chemicals used for treatment of water intended for human consumption .Sodium aluminate Chemicals used for treatment of water intended for human consumption . IDT. 1 1 SANS 50868-4:2003/EN 868-4:1999.Aluminium chloride (monomeric).Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches.Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 .g. IDT. 2 1 SANS 50883:2007/EN 883:2004. 1 Edition Title 1 Separator systems for light liquids (e. reels and lids .Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 4: Paper bags . IDT. IDT.Aluminium sulfate Chemicals used for treatment of water intended for human consumption . installation. IDT. 1 1 SANS 50868-10:2003/EN 868-10:2000.Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate SANS 50868-2:2003/EN 868-2:1999. Ed. IDT. Ed. 2 1 Page 250 . IDT.Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation . Ed. 2 1 SANS 50882:2008/EN 882:2004. IDT. IDT. IDT. IDT. IDT. oil and petrol) Part 2: Selection of nominal size. Ed. operation and maintenance Packaging materials and systems for medical devices which are to be sterilized Part 2: Sterilization wrap .Requirements and test methods Packaging materials and systems for medical devices which are to be sterilized Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction . Ed. Ed.Materials.Hydrogen peroxide Chemicals used for treatment of water intended for human consumption . Ed.Chlorine Chemicals used for treatment of water intended for human consumption . 2 1 SANS 50937:2007/EN 937:1999. Ed.Sodium hydroxide Chemicals used for treatment of water intended for human consumption . 2 1 1 1 SANS 50936:2008/EN 936:2006. 1 1 Page 251 . Ed. IDT. 2 1 SANS 50891:2008/EN 891:2004. Ed. 1 (SABS EN 901) SANS 50902:1999/EN 902:1999. IDT. IDT. IDT. 2 (SABS EN 892) SANS 50896:2007/EN 896:2005.Dynamic mountaineering ropes . IDT. IDT. 2 1 SANS 50887:2008/EN 887:2004. 2 1 SANS 50899:2008/EN 899:2003. Ed. 2 Edition Title 1 Chemicals used for treatment of water intended for human consumption .Carbon dioxide Chemicals used for treatment of water intended for human consumption . IDT. IDT. 1 (SABS EN 938) SANS 50994:2003/EN 994:1995. 2 1 SANS 50901:1999/EN 901:1999. 2 1 SANS 50892:2007/EN 892:2004.Safety requirements and test methods Chemicals used for treatment of water intended for human consumption .Sulfuric acid Chemicals used for treatment of water intended for human consumption . IDT.Iron (III) sulfate liquid Chemicals used for treatment of water intended for human consumption . IDT.Iron (III) chloride Chemicals used for treatment of water intended for human consumption . IDT. Ed. IDT.Sodium carbonate Chemicals used for treatment of water intended for human consumption .Iron (II) sulfate Chemicals used for treatment of water intended for human consumption . Ed. IDT. Ed. 1 1 SANS 50938:1999/EN 938:1999.Standards available in electronic format (PDF) October 2009 SANS Number SANS 50885:2007/EN 885:2004. 2 1 SANS 50898:2007/EN 898:2005. IDT. Ed. 2 1 SANS 50889:2008/EN 889:2004. safety and performance requirements SANS 50886:2007/EN 886:2004. Ed.Poyaluminium hydroxide silicate sulfate Chemicals used for treatment of water intended for human consumption .Determination of the side length. 1 1 1 SANS 51004:2009/EN 1004:2004. dimensions.Sodium chlorite Textile floor coverings . 2 1 SANS 50890:2008/EN 890:2004.Sodium hydrogen carbonate Chemicals used for treatment of water intended for human consumption . Ed. IDT. Ed. squareness and straightness of tiles Mobile access and working towers made of prefabricated elements . Ed. IDT. 2 1 SANS 50888:2008/EN 888:2004.Aluminium iron (lll) chloride (monomeric) and aluminium iron (lll) chloride hydroxide (monomeric) Chemicals used for treatment of water intended for human consumption . IDT. IDT. Ed. Ed. 2 2 1 SANS 50897:2007/EN 897:2005.Iron (III) chloride sulfate Mountaineering equipment . Ed. Ed. Ed. IDT.Sodium hypochlorite Chemicals used for treatment of water intended for human consumption .Aluminium iron (III) sulfate Chemicals used for treatment of water intended for human consumption .Poyaluminium chloride hydroxide silicate Chemicals used for treatment of water intended for human consumption . IDT. 1 (SABS EN 902) SANS 50935:2008/EN 935:2004. design loads. Analytical methods Road restraint systems Part 2: Performance classes. including water recovered from processes in the concrete industry. quality control Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 2: System S .Test methods .Dimensions Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 3: System X .Ozone Chemicals used for treatment of water intended for human consumption . Ed. testing.Acceptance inspection of thermal spraying equipment Thermal spraying . IDT (SABS EN 1395) SANS 51395-1:2009/EN 1395-1:2007. 2 1 SANS 51124-3:2008/EN 1124-3:1999. Ed. Ed. testing and assessing the suitability of water. 2 (SABS EN 1146) 2 SANS 51209:2007/EN 1209:2003. and institutional areas . Ed. IDT. Ed. domestic. Ed. IDT.Test method and requirements (phase 2. testing.Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food.Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape . 1 2 2 1 1 SANS 51124-2:2008/EN 1124-2:2007. IDT. 1 1 SANS 51395:1996/EN 1395:1996. Ed. 1 Edition Title 1 Mixing water for concrete . Ed. marking Chemicals used for treatment of water intended for human consumption . 2 (SABS EN 1021-1) SANS 51021-2:2006/EN 1021-2:2006. IDT.Assessment of the ignitability of upholstered furniture Part 1: Ignition source smouldering cigarette Furniture .Requirements. IDT. 1 1 SANS 51124-4:2008/EN 1124-4:2005.Dimensions Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 4: Components for vacuum drainage systems and for drainage systems on ships Respiratory protective devices . IDT. IDT. IDT. 1 1 SANS 51146:2006/EN 1146:2005. 2 (SABS EN 1021-2) SANS 51075:1999/EN 1075:1999. IDT.Joints made with punched metal plate fasteners Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 1: Requirements. IDT.Aluminium-based coagulants .Powders . IDT. IDT. IDT.Specification for sampling. 1 1 1 Page 252 . industrial. 1 (SABS EN 1075) SANS 51124-1:2008/EN 1124-1:1999. Ed. 1 1 SANS 51317-2:2009/EN 1317-2:1998. 1 2 1 SANS 51278:2008/EN 1278:1998. 2 1 SANS 51274:2009/EN 1274:2004. 2 (SABS EN 1274) SANS 51276:2006/EN 1276:1997. as mixing water for concrete Furniture . IDT. impact test acceptance criteria and test methods for safety barriers Thermal spraying . technical supply conditions Chemical disinfectants and antiseptics . Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 51008:2006/EN 1008:2002. IDT. 1 1 SANS 51302:2007/EN 1302:1999. Ed.Sodium silicate Thermal spraying . Ed. Ed. Ed.Acceptance inspection of thermal spraying equipment Part 1: General requirements SANS 51021-1:2006/EN 1021-1:2006. Ed.Assessment of the ignitability of upholstered furniture Part 2: Ignition source match flame equivalent Timber structures .Composition. step 1) Chemicals used for treatment of water intended for human consumption . Ed. Ed. IDT (SABS EN 1616) SANS 51650:2006/EN 1650:1997. Ed.Polyamines Chemicals used for treatment of water intended for human consumption .Test method and requirements (phase 2. 2 (SABS EN 1780-1) 2 Page 253 . IDT.Anionic and non-ionic polyacrylamides Chemicals used for treatment of water intended for human consumption . IDT. antiskid aggregates and mixtures of the two Road marking materials . IDT. IDT.Castings Chemical composition and mechanical properties Non-destructive testing of welds . 1 (SABS EN 1424) SANS 51600:1997/EN 1600:1997. 1 1 SANS 51395-6:2009/EN 1395-6:2007. IDT. IDT. Ed. IDT. Ed. 1 1 SANS 51410:2007/EN 1410:1998. 1 1 SANS 51423:1997/EN 1423:1997.Acceptance inspection of thermal spraying equipment Part 6: Manipulator systems Thermal spraying . 1 (SABS EN 1676) SANS 51706:1998/EN 1706:1998.Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food. 1 (SABS EN 1706) SANS 51714:2005/EN 1714:1997. 1 Edition Title 1 Thermal spraying .Acceptance inspection of thermal spraying equipment Part 3: Arc spraying Thermal spraying .Drop on materials . step 1) Aluminium and aluminium alloys . Ed. 1 1 SANS 51409:2007/EN 1409:1998. IDT. Ed. Ed. IDT. 1 1 1 1 SANS 51780-1:2008/EN 1780-1:2002. Ed.Glass beads. Ed.Cationic polyacrylamides Road marking materials . Ed. 1 1 SANS 51395-4:2009/EN 1395-4:2007. 1 1 SANS 51395-5:2009/EN 1395-5:2007. Ed. 1 (SABS EN 1600) SANS 51616:1997/EN 1616:1997. Ed.Acceptance inspection of thermal spraying equipment Part 4: Plasma spraying Thermal spraying .Acceptance inspection of thermal spraying equipment Part 7: Powder feed systems Chemicals used for treatment of water intended for human consumption . IDT. 1 1 SANS 51407:2007/EN 1407:1998.Classification Sterile urethral catheters for single use 1 1 Chemical disinfectants and antiseptics . industrial. IDT. master alloys and castings Part 1: Numerical designation system SANS 51676:1996/EN 1676:1996. IDT.Acceptance inspection of thermal spraying equipment Part 2: Flame spraying including HVOF Thermal spraying .Premix glass beads SANS 51395-3:2009/EN 1395-3:2007. IDT.Alloyed ingots for remelting . Ed.Acceptance inspection of thermal spraying equipment Part 5: Plasma spraying in chambers Thermal spraying . IDT. IDT (SABS EN 1423) SANS 51424:1997/EN 1424:1997. Ed.Specifications Aluminium and aluminium alloys . Ed. domestic. IDT. Ed.Designation of alloyed aluminium ingots for remelting. 1 1 SANS 51395-7:2009/EN 1395-7:2007. and institutional areas .Ultrasonic testing of welded joints Aluminium and aluminium alloys . 1 1 1 1 Welding consumables .Standards available in electronic format (PDF) October 2009 SANS Number SANS 51395-2:2009/EN 1395-2:2007. IDT.Covered electrodes for manual metal arc welding of stainless and heat resisting steels . marking Personal protective equipment for the prevention of falls from a height . IDT. Ed.Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only . Ed.Design calculations. 2 1 SANS 52485:2007/EN 12485:2001. 1 (SABS EN 1891) SANS 52094-1:2009/EN 12094-1:2003. IDT. stability criteria.Calcium carbonite. Ed. IDT. IDT. master alloys and castings Part 2: Chemical symbol based designation system Aluminium and aluminium alloys .Designation of alloyed aluminium ingots for remelting. testing.Components for gas extinguishing systems Part 4: Requirements and test methods for container valve assemblies and their actuators Chemicals used for treatment of water intended for human consumption .Standards available in electronic format (PDF) October 2009 SANS Number SANS 51780-2:2008/EN 1780-2:2002. IDT. marking Respiratory protective devices . Ed. 1 1 1 SANS 52094-2:2009/EN 12094-2:2003. Ed.Ammonia solution Load restraint assemblies on road vehicles . 1 1 SANS 51891:1998/EN 1891:1998.Requirements. 1 1 SANS 52122:2007/EN 12122:2005. Ed. IDT. 1 1 SANS 52094-4:2009/EN 12094-4:2004. IDT. Ed.Components for gas extinguishing systems Part 3: Requirements and test methods for manual triggering and stop devices Fixed firefighting systems .Designation of alloyed aluminium ingots for remelting. Ed.Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood Requirements. master alloys and castings Part 3: Writing rules for chemical composition Safety requirements on suspended access equipment .Safety Part 2: Web lashing made from man-made fibres Load restraint assemblies on road vehicles . Ed.Copper sulfate Chemicals used for treatment of water intended for human consumption .Safety Part 3: Lashing chains Load restraint assemblies on road vehicles .Test methods Small wastewater treatment systems for up to 50 PT Part 1: Prefabricated septic tanks SANS 51780-3:2008/EN 1780-3:2002. IDT. 2 1 SANS 52195-2:2007/EN 12195-2:2000. highcalcium lime and half-burnt dolomite . 1 1 SANS 52195-3:2007/EN 12195-3:2001. 2 (SABS EN 1780-2) Edition Title 2 Aluminium and aluminium alloys . IDT. IDT. Ed. IDT. Ed. construction .Components for gas extinguishing systems Part 2: Requirements and test methods for non-electrical automatic control and delay devices Fixed firefighting systems . IDT.Safety Part 4: Lashing steel wire ropes Chemicals used for treatment of water intended for human consumption . 1 1 SANS 52386:2007/EN 12386:2005.Low stretch kernmantel ropes Fixed firefighting systems . 1 (SABS EN 1808) SANS 51827:2004/EN 1827:1999. Ed. IDT. Ed. IDT. IDT. 1 1 SANS 52094-3:2009/EN 12094-3:2003. 1 1 1 SANS 51835:2004/EN 1835:1999. IDT. Ed. 1 1 SANS 52566-1:2004/EN 12566-1:2000. Ed. Ed. 2 (SABS EN 1780-3) 2 SANS 51808:1999/EN 1808:1999. testing.Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices Fixed firefighting systems . Ed. 1 1 SANS 52195-4:2007/EN 12195-4:2003.Tests Respiratory protective devices . 1 1 Page 254 . IDT. 1 1 SANS 53121-4:2009/EN 13121-4:2005. 1 1 SANS 52915-2:2008/EN 12915-2:2003. 1 1 SANS 52932:2008/EN 12932:2000.Determination of contamination in middle distillates Chemicals used for treatment of water intended for human consumption . IDT.Potassium permanganate Raised access floors SANS 52671:2007/EN 12671:2000.Public transport . IDT.Inorganic supporting and filtering materials . IDT. Ed. IDT.Chemicals for emergency use . Ed. Ed. installation and maintenance SANS 52876:2008/EN 12876:2000. 1 1 SANS 52933:2008/EN 12933:2000. Ed. IDT. IDT. 1 1 SANS 52896:2008/EN 12896:2006.Trichloroisocyanuric acid GRP tanks and vessels for use above ground Part 1: Raw materials .Chemicals for emergency use . IDT. Ed. Ed. 1 1 SANS 53121-3:2009/EN 13121-3:2008. IDT. Ed. IDT. IDT.Oxygen Road transport and traffic telematics . IDT. 1 1 SANS 53121-2:2009/EN 13121-2:2003.Silica sand and silica gravel Products used for the treatment of water intended for human consumption . anhydrous Chemicals used for treatment of water intended for human consumption . dihydrate Chemicals used for treatment of water intended for human consumption .Inorganic supporting and filtering materials . Ed. IDT. IDT. IDT. 1 Edition Title 1 Liquid petroleum products . 1 1 SANS 52825:2009/EN 12825:2001. IDT. Ed. Ed. Ed.Granular activated carbon Part 2: Reactivated granular activated carbon Chemicals used for treatment of water intended for human consumption .Powdered activated carbon Products used for treatment of water intended for human consumption .Definitions Products used for treatment of water intended for human consumption .Methods of test Products used for treatment of water intended for human consumption .Sodium dichloroisocyanurate.Chemicals for emergency use . IDT. 1 1 SANS 52931:2008/EN 12931:2000. IDT. 2 1 SANS 52903:2007/EN 12903:2003.Sodium dichloroisocyanurate. Ed.Specification conditions and acceptance conditions GRP tanks and vessels for use above ground Part 2: Composite materials . 1 1 SANS 52902:2007/EN 12902:2004.Chlorine dioxide Chemicals used for treatment of water intended for human consumption . Ed. Ed. Ed. 2 1 SANS 52904:2007/EN 12904:2005. 1 1 SANS 53121-1:2009/EN 13121-1:2003. 1 1 SANS 52672:2007/EN 12672:2000. Ed.Reference data model Products used for treatment of water intended for human consumption . Ed. 2 1 SANS 52915-1:2008/EN 12915-1:2003.Standards available in electronic format (PDF) October 2009 SANS Number SANS 52662:2007/EN 12662:1998. 1 1 Ductile iron fittings for PVC-U or PE piping systems Requirements and test methods Chemicals used for treatment of water intended for human consumption . Ed. 1 1 SANS 52901:2007/EN 12901:1999. Ed. 1 1 Page 255 .Granular activated carbon Part 1: Virgin granular activated carbon Products used for the treatment of water intended for human consumption . IDT. 1 1 SANS 52842:2007/EN 12842:2000. IDT. Ed. IDT.Chemical resistance GRP tanks and vessels for use above ground Part 3: Design and workmanship GRP tanks and vessels for use above ground Part 4: Delivery. Road vehicle scheduling and control systems Part 4: General application rules for CANopen transmission buses Public transport . 1 1 SANS 53763-2:2008/EN 13763-2:2002.Road vehicle scheduling and control systems Part 1: WORLDFIP definition and application rules for onboard data transmission Public transport . 1 1 Road Transport and Traffic Telmatics (RTTT) Dedicated short-range communication . Ed. IDT. IDT. 1 1 SANS 53149-2:2009/EN 13149-2:2004. IDT. Ed. Ed. Ed. Ed. step 1) Products used for treatment of water intended for human consumption . Ed. Ed. IDT. Ed. IDT. 1 1 SANS 53754:2008/EN 13754:2003. IDT. IDT. Ed.Test method and requirements (phase 2.Road vehicle scheduling and control systems Part 6: CAN message content Specification for glass fibre reinforced cisterns of one-piece and sectional construction.Road vehicle scheduling and control systems Part 5: CANopen cabling specifications Public transport . IDT. industrial. IDT. 1 1 SANS 53280:2009/EN 13280:2001. IDT.Detonators and relays Part 1: Requirements Explosives for civil uses . 1 1 SANS 53631-14:2006/EN 13631-14:2003. Ed. IDT. Ed. of cold water Maintenance terminology SANS 53138-2:2009/EN 13138-2:2007.Profiles for RTTT applications Cathodic protection measurement techniques SANS 53509:2009/EN 13509:2003. 1 Edition Title 1 Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for buoyant aids to be worn Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held Buoyant aids for swimming instruction Part 3: Safety requirements and test methods for swim seats to be worn Public transport . Ed. for the storage. Ed. Ed. 2 2 SANS 53138-3:2009/EN 13138-3:2007. 1 1 SANS 53149-6:2008/CEN/TS 13149-6:2005.Bentonite Explosives for civil uses . 1 1 Explosives for civil uses . above ground. 1 1 SANS 53763-1:2008/EN 13763-1:2004. 1 1 SANS 53149-5:2009/EN 13149-5:2004. IDT. IDT. Ed. and institutional areas . IDT. IDT. 1 1 Page 256 .Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food. 1 1 SANS 53149-3:2009/CEN/TS 13149-3:2007.Detonators and relays Part 2: Determination of thermal stability SANS 53704:2006/EN 13704:2002.Road vehicle scheduling and control systems Part 3: WorldFIP message content Public transport . Ed.High explosives Part 14: Determination of velocity of detonation Chemical disinfectants . IDT. 1 1 SANS 53372:2009/EN 13372:2004. 1 1 SANS 53306:2008/EN 13306:2001. IDT. 2 2 SANS 53149-1:2009/EN 13149-1:2004. Ed. IDT. 1 1 SANS 53149-4:2009/EN 13149-4:2004.Road vehicle scheduling and control systems Part 2: WORLDFIP cabling specifications Public transport . domestic.Standards available in electronic format (PDF) October 2009 SANS Number SANS 53138-1:2007/EN 13138-1:2003. Ed. IDT.Detonators and relays Part 20: Determination of total electrical resistance of electric detonators Explosives for civil uses .Detonators and relays Part 8: Determination of the resistance to vibration of plain detonators Explosives for civil uses . IDT.Detonators and relays Part 6: Determination of resistance to cracking in low temperatures of leading wires Explosives for civil uses . 1 Edition Title 1 Explosives for civil uses . IDT. Ed. methods and requirements for devices and accessories for reliable and safe function of detonators and relays SANS 53763-4:2008/EN 13763-4:2003. IDT. IDT. Ed. Ed. 1 1 SANS 53763-6:2008/EN 13763-6:2003. 1 1 Page 257 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 53763-3:2008/EN 13763-3:2002. 1 1 SANS 53763-24:2008/EN 13763-24:2002. IDT. IDT. Ed. 1 1 SANS 53763-8:2008/EN 13763-8:2003.Detonators and relays Part 15: Determination of equivalent initiating capability Explosives for civil uses . connections. IDT. Ed. Ed.Detonators and relays Part 16: Determination of delay accuracy Explosives for civil uses . 1 1 SANS 53763-18:2006/EN 13763-18:2003.Detonators and relays Part 17: Determination of no-fire current of electric detonators Explosives for civil uses . 1 1 SANS 53763-19:2008/EN 13763-19:2003. IDT. 1 1 SANS 53763-17:2006/EN 13763-17:2003. Ed. Ed.Detonators and relays Part 12: Determination of resistance to hydrostatic pressure Explosives for civil uses . 1 1 SANS 53763-11:2008/EN 13763-11:2003.Detonators and relays Part 3: Determination of sensitiveness to impact Explosives for civil uses . 1 1 SANS 53763-15:2008/EN 13763-15:2004.Detonators and relays Part 7: Determination of the mechanical strength of leading wires. shock tubes. Ed. Ed. Ed. IDT.Detonators and relays Part 24: Determination of the electrical non-conductivity of shock tube Explosives for civil uses . IDT. 1 1 SANS 53763-26:2008/EN 13763-26:2004. crimps and closures Explosives for civil uses . 1 1 SANS 53763-20:2006/EN 13763-20:2003. 1 1 SANS 53763-21:2008/EN 13763-21:2003.Detonators and relays Part 4: Determination of resistance to abrasion of leading wires and shock tubes Explosives for civil uses . IDT. Ed.Detonators and relays Part 26: Definitions. IDT. 1 1 SANS 53763-7:2008/EN 13763-7:2003. Ed. Ed. Ed. Ed. IDT. Ed.Detonators and relays Part 5: Determination of resistance to cutting damage of leading wires and shock tubes Explosives for civil uses . 1 1 SANS 53763-16:2006/EN 13763-16:2003.Detonators and relays Part 19: Determination of firing impulse of electric detonators Explosives for civil uses .Detonators and relays Part 11: Determination of resistance to damage by dropping of detonators and relays Explosives for civil uses .Detonators and relays Part 13: Determination of resistance of electric detonators to electrostatic discharge Explosives for civil uses . IDT.Detonators and relays Part 21: Determination of flash-over voltage of electric detonators Explosives for civil uses .Detonators and relays Part 18: Determination of series firing current of electric detonators Explosives for civil uses . 1 1 SANS 53763-13:2006/EN 13763-13:2004. 1 1 SANS 53763-5:2008/EN 13763-5:2003. Ed. 1 1 SANS 53763-12:2006/EN 13763-12:2003. IDT. IDT. IDT. 1 1 SANS 54387:2007/EN 14387:2004. design. 1 1 SANS 54110:2007/EN 14110:2003.Determination of ester and linolenic acid methyl ester contents Fat and oil derivatives . Ed. 1 1 SANS 54107:2007/EN 14107:2003.Determination of acid value Fat and oil derivatives . Ed. 1 1 SANS 54593-1:2006/EN 14593-1:2005.Fatty Acid Methyl Esters (FAME) . IDT. 1 1 SANS 54106:2007/EN 14106:2003. IDT.Fatty Acid Methyl Esters (FAME) . Ed. testing.Fatty Acid Methyl Esters (FAME) . IDT. 1 1 Page 258 . IDT. IDT. Ed. IDT.Fatty Acid Methyl Esters (FAME) . Ed.Determination of methanol content Fat and oil derivatives . IDT.Determination of free and total glycerol and mono-. 1 1 Filament-wound FRP pressure vessels . 1 1 SANS 53923:2009/EN 53923:2005.Non-interactive dynamic passenger information on ground Fat and oil derivatives . IDT. marking Respiratory protective devices . 1 1 SANS 54112:2007/EN 14112:2003.Fatty Acid Methyl Esters (FAME) . Ed. Ed. Ed.Determination of oxidation stability (accelerated oxidation test) Respiratory protective devices . Ed. Ed.Requirements. IDT. di-.Determination of iodine value Fat and oil derivatives .Detonators and relays Part 27: Definitions.Determination of potassium content by atomic absorption spectrometry Fat and oil derivatives .Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry Fat and oil derivatives . Ed. marking SANS 53998:2008/ENV 13998:2001. 1 1 SANS 54109:2007/EN 14109:2003. IDT. methods and requirements for electronic initiation systems Respiratory protective devices . 1 1 SANS 54103:2007/EN 14103:2003. Ed.Fatty Acid Methyl Esters (FAME) . IDT. IDT.Compressed air line breathing apparatus with demand valve Part 1: Apparatus with a full face mask .Fatty Acid Methyl Esters (FAME) . 1 1 SANS 54111:2007/EN 14111:2003. manufacturing and testing Road transport and traffic telematics .Fatty Acid Methyl Esters (FAME) . IDT. Ed. testing. Ed. Ed. 1 1 SANS 54108:2007/EN 14108:2003. testing.Public transport . IDT.Specification Explosives for civil uses Part 1: Terminology 1 SANS 53811:2006/EN 13811:2003.Gas filter(s) and combined filter(s) . IDT. Ed. 1 Edition Title 1 Explosives for civil uses .Requirements. triglyceride content (Reference method) Fat and oil derivatives . 1 1 SANS 53857-1:2008/EN 13857-1:2003. IDT. 1 SANS 53794:2007/EN 13794:2002.Determination of free glycerol content Fat and oil derivatives . 1 1 SANS 54104:2007/EN 14104:2003.Determination of sodium content by atomic absorption spectrometry Fat and oil derivatives . IDT.Fatty Acid Methyl Esters (FAME) .Fatty Acid Methyl Esters (FAME) . Ed. 1 1 SANS 54105:2007/EN 14105:2003. Ed.Zinc diffusion coatings on ferrous products .Self-contained closed-circuit breathing apparatus for escape Requirements.Materials.Standards available in electronic format (PDF) October 2009 SANS Number SANS 53763-27:2008/CEN/TS 13763-27:2003. IDT. marking Sherardizing . 1 1 SANS 54821-3:2008/CEN/TS 14821-3:2003. 1 Edition Title 1 Respiratory protective devices . Ed. 3 (SABS IEC 60034-2) 1 Page 259 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 54593-2:2006/EN 14593-2:2005. IDT.Electronic fee collection . 1 1 SANS 54821-8:2008/CEN/TS 14821-8:2003. Ed. IDT. marking Respiratory protective devices . IDT. IDT. IDT. Ed. Ed. Ed. 1 1 SANS 54821-2:2008/CEN/TS 14821-2:2003.Service interface for real-time information relating to public transport operations Part 2: Communications infrastructure Public transport . 11 3 SANS 60034-2:1972/IEC 60034-2:1972. IDT.Service interface for real-time information relating to public transport operations Part 1: Context and framework Public transport . 1 1 SANS 55509:2009/EN 15509:2007.TTI messages via cellular networks Part 7: Performance requirements for onboard positioning Traffic and Travel Information (TTI) . IDT. 1 1 SANS 55531-1:2008/CEN/TS 15531-1:2007.TTI messages via cellular networks Part 2: Numbering and ADP message header Traffic and Travel Information (TTI) .Visible variable passenger information devices inside the vehicle Road transport and traffic telematics .Continuous flow compressed air line breathing apparatus Requirements. Ed. Ed. Ed. Ed. Ed. 1 1 SANS 54821-7:2008/CEN/TS 14821-7:2003.TTI messages via cellular networks Part 3: Basic information elements Traffic and Travel Information (TTI) .TTI messages via cellular networks Part 8: GSM-specific parameters Public transport . IDT. IDT. 1 1 SANS 60034-1:2006/IEC 60034-1:2004. IDT. IDT.TTI messages via cellular networks Part 6: External services Traffic and Travel Information (TTI) . IDT. Ed. testing. Ed. Ed.Interoperability application profile for DSRC Public transport . 1 1 SANS 54821-6:2008/CEN/TS 14821-6:2003. Ed. 1 1 SANS 54821-4:2008/CEN/TS 14821-4:2003. Ed. 1 1 SANS 54821-1:2008/CEN/TS 14821-1:2003.TTI messages via cellular networks Part 5: Internal services Traffic and Travel Information (TTI) . IDT. testing. IDT. 1 1 SANS 55531-3:2008/CEN/TS 15531-3:2007.Compressed air line breathing apparatus with demand valve Part 2: Apparatus with a half mask at positive pressure Requirements. IDT. marking Traffic and Travel Information (TTI) . IDT. IDT.Service interface for real-time information relating to public transport operations Part 3: Functional service interfaces Rotating electrical machines Part 1: Rating and performance Rotating electrical machines Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) SANS 54594:2006/EN 14594:2005. Ed. 1 1 SANS 55504:2009/CEN/TS 15504:2007. 1 1 SANS 54821-5:2008/CEN/TS 14821-5:2003. 1 1 SANS 55531-2:2008/CEN/TS 15531-2:2007.Road vehicles .TTI messages via cellular networks Part 4: Service-independent protocols Traffic and Travel Information (TTI) .TTI messages via cellular networks Part 1: General specifications Traffic and Travel Information (TTI) . Ed. Ed. Ed. IDT. Ed. IDT. 2 2 (SABS IEC 60034-11) SANS 60034-12:2008/IEC 60034-12:2007.1 (SABS IEC 60034-7) SANS 60034-8:2007/IEC 60034-8:2007. mounting arrangements and terminal box position (IM Code) Rotating electrical machines Part 8: Terminal markings and direction of rotation Rotating electrical machines Part 9: Noise limits SANS 60034-2-1:2008/IEC 60034-2-1:2007. 1 (SABS IEC 60034-16-1) SANS 60034-16-2:1991/IEC 60034-16-2:1991. IDT. 3 (SABS IEC 60034-8) SANS 60034-9:2007/IEC 60034-9:2007.Measurement. Ed. IDT. IDT. 4.1 (SABS IEC 60034-12) SANS 60034-14:2007/IEC 60034-14:2007. IDT. IDT. Ed. 1 (SABS IEC 60034-16-2) SANS 60034-16-3:1996/IEC 60034-16-3:1996. Ed. Ed. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) Rotating electrical machines Part 2A: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) First supplement: Measurement of losses by the calorimetric method Rotating electrical machines Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines Rotating electrical machines Part 4: Methods for determining synchronous machine quantities from tests Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) . IDT.01 1 1. Ed. Ed. 6 (SABS IEC 60034-3) SANS 60034-4:2009/IEC 60034-4:2008. 1 (SABS IEC 60034-2A) 1 SANS 60034-3:2008/IEC 60034-3:2007. Ed. IDT. 4. IDT.1 (SABS IEC 60034-9) 3 2 2.01 SANS 60034-15:1995/IEC 60034-15:1995.01 3 3. Ed. 2. evaluation and limits of vibration severity Rotating electrical machines Part 15: Impulse voltage withstand levels of rotating a. IDT. IDT.c. Ed. 1 (SABS IEC 60034-16-3) SANS 60034-17:2006/IEC TS 60034-17:2006. machines with form-wound stator coils Rotating electrical machines Part 16: Excitation systems for synchronous machines Chapter 1: Definitions Rotating electrical machines Part 16: Excitation systems for synchronous machines Chapter 2: Models for power system studies Rotating electrical machines Part 16: Excitation systems for synchronous machines Section 3: Dynamic performance Rotating electrical machines Part 17: Cage induction motors when fed from converters . Ed.01 Rotating electrical machines Part 11: Thermal protection Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher . Ed. Ed. IDT.Classification Rotating electrical machines Part 6: Methods of cooling (IC Code) Rotating electrical machines Part 7: Classification of types of construction. 2. 1 1 SANS 60034-2A:1974/IEC 60034-2A:1974. 2 (SABS IEC 60034-6) SANS 60034-7:2001/IEC 60034-7:2001. 3 (SABS IEC 60034-4) SANS 60034-5:2007/IEC 60034-5:2006. 3.1 (SABS IEC 60034-5) SANS 60034-6:1991/IEC 60034-6:1991.01 SANS 60034-11:2005/IEC 60034-11:2004. IDT. 2 2 (SABS IEC 60034-15) SANS 60034-16-1:1991/IEC 60034-16-1:1991.Application guide 3.1 (SABS IEC 60034-14) 2. 4 (SABS IEC 60034-17) 1 1 1 4 Page 260 . Ed. IDT. IDT. Ed. 2 (SABS IEC 60034-18-22) SANS 60034-18-31:1992/IEC 60034-18-31:1992. 1 1 SANS 60034-18-42:2009/IEC/TS 60034-18-42:2008.c motors specifically designed for converter supply Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of threephase cage induction motors 1 2 1 SANS 60034-18-32:1995/IEC 60034-18-32:1995. Ed. IDT.Classification of changes and insulation component substitutions Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 31: Test procedures for form-wound windings . IDT.Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 32: Test procedures for form-wound windings . 1 (SABS IEC 60034-18-1) SANS 60034-18-21:1992/IEC 60034-18-21:1992. IDT.Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 33: Test procedures for form-wound windings . 1 (SABS IEC 60034-18-33) 1 SANS 60034-18-34:2006/IEC 60034-18-34:2000. 1 (SABS IEC 60034-18-21) SANS 60034-18-22:2000/IEC 60034-18-22:2000.Multifactor functional evaluation . machines on conventional and rectifier-fed supplies Rotating electrical machines Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets Rotating electrical machines Part 23: Specification for the refurbishing of rotating electrical machines Rotating electrical machines Part 25: Guide for the design and performance of a. Ed. Ed. IDT. IDT. IDT. 1 1 (SABS IEC 60034-22) SANS 60034-23:2003/IEC TS 60034-23:2003. IDT. Ed. Ed. 1 (SABS IEC 60034-18-32) 1 SANS 60034-18-33:1995/IEC 60034-18-33:1995. IDT. 1 SANS 60034-25:2007/IEC TS 60034-25:2007. IDT. 1 1 SANS 60034-19:1995/IEC 60034-19:1995. 2 1 2 SANS 60034-26:2006/IEC 60034-26:2006. Ed. IDT. 1 2 Page 261 . IDT. Ed. IDT. IDT. Ed.Test procedures for form-wound windings . Ed.Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15 kV Rotating electrical machines Part 18-34: Functional evaluation of insulation systems .Thermal evaluation and classification Rotating electrical machines Part 18-22: Functional evaluation of insulation systems . IDT. Ed.c. 1 1 SANS 60034-18-41:2009/IEC/TS 60034-18-41:2006. Ed.Test procedures for wire-wound windings .Evaluation of thermomechanical endurance of insulation systems Rotating electrical machines Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters Rotating electrical machines Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters Rotating electrical machines Part 19: Specific test methods for d. 1 1 (SABS IEC 60034-19) SANS 60034-22:1996/IEC 60034-22:1996.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60034-18-1:1992/IEC 60034-18-1:1992. Ed. 1 (SABS IEC 60034-18-31) Edition Title 1 Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 1: General guidelines Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 21: Test procedures for wire-wound windings . Ed. IDT. Ed. IDT. Ed. 7. IDT. video and similar electronic apparatus Safety requirements Dimensions and output series for rotating electrical machines Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 Dimensions and output series for rotating electrical machines Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360 1 SANS 60044-5:2005/IEC 60044-5:2004. IDT. Ed. IDT. IDT. IDT. IDT. Ed.4 1. Ed. Ed.01 1 1 Page 262 .02 Instrument transformers Part 2: Inductive voltage transformers Instrument transformers Part 3: Combined transformers Instrument transformers Part 5: Capacitor voltage transformers Instrument transformers Part 6: Requirements for protective current transformers for transient performance Instrument transformers Part 7: Electronic voltage transformers Instrument transformers Part 8: Electronic current transformers International electrotechnical vocabulary Chapter 441: Switchgear.04 SANS 60065:2008/IEC 60065:2005. 1 (SABS IEC 60072-2) 3. 1 1 1 SANS 60050-441:1984/IEC 60050441:1984. Ed. IDT. cageinduction motors (IE-code) Instrument transformers Part 1: Current transformers SANS 60034-28:2007/IEC 60034-28:2007. IDT. Ed. 1 2 (SABS IEC 60050-441) SANS 60060-1:1989/IEC 60060-1:1989.2 (SABS IEC 60044-2) SANS 60044-3:2004/IEC 60044-3:2002. Ed. 1.02 1. IDT. three-phase.1 (SABS IEC 60065) SANS 60072-1:1991/IEC 60072-1:1991. 1 (SABS IEC 60044-7) SANS 60044-8:2004/IEC 60044-8:2002. Ed. 2 (SABS IEC 60060-2) SANS 60060-3:2006/IEC 60060-3:2006. 1 1 SANS 60044-7:1999/IEC 60044-7:1999.Performance requirements Audio. 1 1 1 1 SANS 60064:2007/IEC 60064:2007. IDT. 1 1 SANS 60044-1:2003/IEC 60044-1:2003. Ed. IDT. IDT.Indirect testing to determine temperature rise Rotating electrical machines Part 30: Efficiency classes of single-speed. 1 1 SANS 60034-29:2008/IEC 60034-29:2008.2 (SABS IEC 60044-1) SANS 60044-2:2003/IEC 60044-2:2003. 6. IDT. 1 1 SANS 60044-6:2004/IEC 60044-6:1992. 1. IDT. Ed. Ed. IDT. 2 1. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60034-27:2007/IEC TS 60034-27:2006. Ed. 1 1 SANS 60034-30:2009/IEC 60034-30:2008. controlgear and fuses High-voltage test techniques Part 1: General definitions and test requirements High-voltage test techniques Part 2: Measuring systems High-voltage test techniques Part 3: Definitions and requirements for on-site testing Tungsten filament lamps for domestic and similar general lighting purposes . 1 Edition Title 1 Rotating electrical machines Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines Rotating electrical machines Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors Rotating electrical machines Part 29: Equivalent loading and superposition techniques . 2 (SABS IEC 60060-1) SANS 60060-2:1994/IEC 60060-2:1994. Ed. IDT. Ed. 6 (SABS IEC 60072-1) SANS 60072-2:1990/IEC 60072-2:1990. Ed. Ed. IDT. Ed. IDT. Ed. Ed. IDT. Ed. 1 1 SANS 60076-14:2009/IEC/TS 60076-14:2009. IDT. Ed. Ed. IDT.Application guide Power transformers Part 11: Dry-type transformers SANS 60076-11:2005/IEC 60076-11:2004. IDT. 2 (SABS IEC 60076-2) SANS 60076-3:2000/IEC 60076-3:2000. Ed. IDT. 2 2 SANS 60076-15:2008/IEC 60076-15:2008. Ed.General requirements Electrical apparatus for explosive gas atmospheres Part 1: Flameproof enclosures "d" Electrical apparatus for explosive gas atmospheres Part 1: Flameproof enclosures "d" . IDT. 2 (SABS IEC 60076-3) SANS 60076-4:2004/IEC 60076-4:2002. 5 (SABS IEC 60079-0) SANS 60079-1:2004/IEC 60079-1:2003. 1 1 SANS 60076-12:2009/IEC 60076-12:2008.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60072-3:1994/IEC 60072-3:1994. 1 1 Power transformers Part 12: Loading guide for drytype power transformers Power transformers Part 13: Self-protected liquidfilled transformers Power transformers Part 14: Design and application of liquid-immersed power transformers using hightemperature insulation materials Power transformers Part 15: Gas-filled power transformers Explosive atmospheres Part 0: Equipment . Ed.Power transformers and reactors Power transformers Part 5: Ability to withstand short circuit Power transformers Part 6: Reactors 1 SANS 60076-5:2006/IEC 60076-5:2006. 1 Edition Title 1 Dimensions and output series for rotating electrical machines Part 3: Small built-in motors . 1 1 Power transformers Part 10: Determination of sound levels Power transformers Part 10-1: Determination of sound levels . IDT.Method of test for ascertainment of maximum experimental safe gap Explosive atmospheres Part 2: Equipment protection by pressurized enclosures <<p>> SANS 60076-13:2006/IEC 60076-13:2006. 1 1 SANS 60079-2:2007/IEC 60079-2:2007. Ed. 5 (SABS IEC 60079-1) 4 3 SANS 60079-1-1:2004/IEC 60079-1-1:2002. Ed. Ed. IDT. IDT. Ed. IDT. IDT. 3 (SABS IEC 60076-5) SANS 60076-6:2008/IEC 60076-6:2007. IDT.Application guide SANS 60076-8:1997/IEC 60076-8:1997. Ed. Ed. Ed. Ed. IDT. 1 1 (SABS IEC 60076-10) SANS 60076-10-1:2008/IEC 60076-10-1:2005.1 (SABS IEC 60076-1) SANS 60076-2:1993/IEC 60076-2:1993. IDT. IDT.Flange numbers BF10 to BF50 Power transformers Part 1: General 1. Ed. 1 1 Power transformers Part 7: Loading guide for oilimmersed power transformers Power transformers . 2. 5 (SABS IEC 60079-2) 3 Page 263 . 1 (SABS IEC 60072-3) SANS 60076-1:2008/IEC 60076-1:2000. Ed. IDT. IDT. 1 (SABS IEC 60076-8) 1 SANS 60076-10:2001/IEC 60076-10:2001. 1 3 1 SANS 60076-7:2006/IEC 60076-7:2005. Ed. IDT. 1 1 SANS 60079-0:2009/IEC 60079-0:2007. IDT. dielectric tests and external clearances in air Power transformers Part 4: Guide to the lightning impulse and switching impulse testing .01 1 Power transformers Part 2: Temperature rise 2 Power transformers Part 3: Insulation levels. 1 1 (SABS IEC 60079-20) SANS 60079-25:2003/IEC 60079-25:2003. IDT. Ed. 3 3 (SABS IEC 60079-18) SANS 60079-19:2007/IEC 60079-19:2006. Ed. IDT. 4 3 (SABS IEC 60079-10) SANS 60079-11:2007/IEC 60079-11:2006. Ed. test and marking of type of protection "n" electrical apparatus Electrical apparatus for explosive gas atmospheres Part 16: Artificial ventilation for the protection of analyzer(s) houses Explosive atmospheres Part 17: Electrical installations inspection and maintenance Explosive atmospheres Part 18: Equipment protection by encapsulation "m" Explosive atmospheres Part 19: Equipment repair. 1 1 SANS 60079-26:2007/IEC 60079-26:2006. Ed. 1 1 (SABS IEC 60079-13) SANS 60079-14:2009/IEC 60079-14:2007. IDT. 2 2 SANS 60079-27:2009/IEC 60079-27:2008. IDT. 1 1 (SABS IEC 60079-12) SANS 60079-13:1982/IEC 60079-13:1982. 3 3 (SABS IEC 60079-15) SANS 60079-16:1990/IEC 60079-16:1990. 3 (SABS IEC 60079-6) SANS 60079-7:2007/IEC 60079-7:2006. 3 (SABS IEC 60079-5) SANS 60079-6:2009/IEC 60079-6:2007. IDT. 5 3 (SABS IEC 60079-11) SANS 60079-12:1978/IEC 60079-12:1978. Ed. IDT. IDT. Ed. IDT. IDT. Ed. 4 4 (SABS IEC 60079-17) SANS 60079-18:2009/IEC 60079-18:2009. Ed. IDT. 2 2 (SABS IEC 60079-19) SANS 60079-20:1996/IEC 60079-20:1996.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60079-4:1975/IEC 60079-4:1975. IDT. Ed. overhaul and reclamation Electrical apparatus for explosive gas atmospheres Part 20: Data for flammable gases and vapours relating to the use of electrical apparatus Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga Explosive atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation 3 3 3 SANS 60079-10:2005/IEC 60079-10:2002. 1 1 (SABS IEC 60079-16) SANS 60079-17:2009/IEC 60079-17:2007. Ed. Ed. Ed. IDT. 4 (SABS IEC 60079-7) Edition Title 1 Electrical apparatus for explosive gas atmospheres Part 4: Method of test for ignition temperature Explosive atmospheres Part 5: Equipment protection by powder filling "q" Explosive atmospheres Part 6: Equipment protection by oil-immersion "o" Explosive atmospheres Part 7: Equipment protection by increased safety "e" Electrical apparatus for explosive gas atmospheres Part 10: Classification of hazardous areas Explosive atmospheres Part 11: Equipment protection by intrinsic safety "i" Electrical apparatus for explosive gas atmospheres Part 12: Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents Electrical apparatus for explosive gas atmospheres Part 13: Construction and use of rooms or buildings protected by pressurization Explosive atmospheres Part 14: Electrical installations design. 4 4 (SABS IEC 60079-14) SANS 60079-15:2006/IEC 60079-15:2005. Ed. 2 (SABS IEC 60079-4) SANS 60079-5:2009/IEC 60079-5:2007. 2 2 SANS 60079-28:2009/IEC 60079-28:2006. IDT. IDT. Ed. 1 1 Page 264 . IDT. Ed. IDT. Ed. Ed. IDT. selection and erection Electrical apparatus for explosive gas atmospheres Part 15: Construction. IDT. Ed. Ed. IDT. Ed. Ed. IDT. Ed. IDT. IDT. IDT. IDT. 3. Ed. 60099-6.Measurements at radio and video frequencies Methods of measurement on receivers for television broadcast transmissions Part 2: Audio channels General methods and methods for monophonic channels 3 1 2 1. 3 (SABS IEC 60107-1) 1 SANS 60107-2:1997/IEC 60107-2:1997. 5. IDT.2 (SABS IEC 60099-4) SANS 60099-5:2007/IEC 60099-5:2000. 1 1 SANS 60081:2006/IEC 60081:2005. 1 2.Application guide for design. Ed. 1 Edition Title 1 Explosive atmospheres Part 30-1: Electrical resistance trace heating .01 2. 2 (SABS IEC 60086-5) SANS 60095-1:2007/IEC 60095-1:2006. 60099-4. Ed. Ed. IDT.01 1 SANS 60099-7:2005/IEC/PAS 60099-7:2004. Ed. 61643-311. 61643-12. 3 (SABS IEC 60086-4) SANS 60086-5:2005/IEC 60086-5:2005. 2 (SABS IEC/ISO 60086-3) SANS 60086-4:2008/IEC 60086-4:2007. systems Surge arresters Part 5: Selection and application recommendations Surge arresters Part 6: Surge arresters containing both series and parallel gapped structures .Standards available in electronic format (PDF) October 2009 SANS Number SANS 60079-30-1:2007/IEC 60079-30-1:2007. IDT. Ed. IDT. Ed.1 (SABS IEC 60099-1) SANS 60099-4:2009/IEC 60099-4:2009. 2. Ed.03 4 5 Primary batteries Part 2: Physical and electrical specifications Primary batteries Part 3: Watch batteries 2 3 Primary batteries Part 4: Safety of lithium batteries 2 Primary batteries Part 5: Safety of batteries with aqueous electrolyte Lead-acid starter batteries Part 1: General requirements and methods of test Lead-acid starter batteries Part 2: Dimensions of batteries and dimensions and marking of terminals Lead-acid starter batteries Part 4: Dimensions of batteries for heavy vehicles Surge arresters Part 1: Non-linear resistor type gapped surge arresters for a. 11 (SABS IEC 60086-2) SANS 60086-3:2005/IEC 60086-3:2004. Ed. Ed. Ed. Ed.Rated 52 kV and less Surge arresters Part 7: Glossary of terms and definitions from IEC publications 60099-1. IDT.3 (SABS IEC 60081) SANS 60086-1:2007/IEC 60086-1:2006. Ed. 3 (SABS IEC 60095-2) SANS 60095-4:2008/IEC 60095-4:2008. 1. Ed.General and testing requirements Explosive atmospheres Part 30-2: Electrical resistance trace heating . 1 1 SANS 60107-1:1997/IEC 60107-1:1997. IDT. IDT. IDT.c.c systems Surge arresters Part 4: Metal-oxide surge arresters without gaps for a. 61643-321.Performance specifications Primary batteries Part 1: General 1 SANS 60079-31:2009/IEC 60079-31:2008. IDT. installation and maintenance Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" Double-capped fluorescent lamps . 61643-21. 2 (SABS IEC 60095-4) SANS 60099-1:1999/IEC 60099-1:1999.1 (SABS IEC 60099-5) SANS 60099-6:2005/IEC 60099-6:2002. IDT. 10 (SABS IEC 60086-1) SANS 60086-2:2007/IEC 60086-2:2006. Ed. 61643-331 and 61643-341 Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations . 61643-1. IDT.02 1. IDT. 7 (SABS IEC 60095-1) SANS 60095-2:1984/IEC 60095-2:1984. IDT. 1 SANS 60079-30-2:2007/IEC 60079-30-2:2007. 2 (SABS IEC 60107-2) 1 Page 265 . Ed. IDT. c. IDT. IDT. IDT. Ed. Ed.General requirements and line commutated convertors Part 1-1: Specification of basic requirements Semiconductor convertors . 1 (SABS IEC 60211) SANS 60227-1:2006/IEC 60227-1:1998. 5 (SABS IEC 60137) 1 1 2 SANS 60146-1-1:1991/IEC 60146-1-1:1991. IDT.0 1 2 3. 1 1 (SABS IEC 60204-11) SANS 60204-32:2009/IEC 60204-32:2008. Ed. Ed. Ed.02 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 1: General requirements Page 266 .02 Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 V High-pressure mercury vapour lamps . IDT. 3 (SABS IEC 60120) SANS 60136:1986/IEC 60136:1986.Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V a. IDT. 3 (SABS IEC 60192) SANS 60204-1:2009/IEC 60204-1:2009.Electrical equipment of machines Part 1: General requirements Safety of machinery . 1.General requirements and line commutated convertors Part 1-2: Application guide Semiconductor convertors . IDT.2 (SABS IEC 60168) SANS 60188:2001/IEC 60188:2001.c and not exceeding 36 kV Safety of machinery .Performance specifications Low-pressure sodium vapour lamps . IDT. Ed. Ed. 4. Ed. IDT. IDT. 2 (SABS IEC 60146-2) SANS 60146-6:1992/IEC 60146-6:1992. Ed. Ed.c or 1 500 V d. Ed. IDT. Ed.General requirements and line commutated convertors Part 1-3: Transformers and reactors Semiconductor converters Part 2: Self-commutated semiconductor converters including direct d. Ed. 3 (SABS IEC 60188) SANS 60192:2001/IEC 60192:2001. IDT. Class l. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60107-5:1999/IEC 60107-5:1999. Ed. Ed. Ed.1 (SABS IEC 60204-1) 1. IDT.01 SANS 60204-11:2000/IEC 60204-11:2000.1 (SABS IEC 60107-5) Edition Title 1. converters Semiconductor convertors Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses Glow-starters for fluorescent lamps SANS 60120:1984/IEC 60120:1984.Electrical equipment of machines Part 32: Requirements for hoisting machines Maximum demand indicators. 5. IDT. 1 3 (SABS IEC 60146-1-3) SANS 60146-2:1999/IEC 60146-2:1999. 2 (SABS IEC 60136) SANS 60137:2004/IEC 60137:2003.2 1 1. IDT. 1 3 (SABS IEC 60146-1-1) SANS 60146-1-2:1991/IEC 60146-1-2:1991. IDT.01 Recommended methods of measurements on receivers for television broadcast transmissions Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system Dimensions of ball and socket couplings of string insulator units Dimensions of brushes and brush-holders for electrical machinery Insulated bushings for alternating voltages above 1 000 V Semiconductor convertors . 4 1 2 1 SANS 60168:2001/IEC 60168:2001. 2. Ed. 1 (SABS IEC 60146-6) SANS 60155:2007/IEC 60155:1993. 1 3 (SABS IEC 60146-1-2) SANS 60146-1-3:1991/IEC 60146-1-3:1991. IDT. 2 1 SANS 60211:1966/IEC 60211:1966.Performance specifications Safety of machinery . Ed. IDT.Guide for installation and operation AC motor capacitors Part 2: Motor start capacitors 1 SANS 60254-2:2008/IEC 60254-2:2008. IDT.1 (SABS IEC 60309-1) SANS 60309-2:2006/IEC 60309-2:2005.Safety requirements . Ed. Ed. IDT. 1 4. Ed. socket-outlets and couplers for industrial purposes Part 1: General requirements Plugs. Ed. 3 (SABS IEC 60269-3) 2 SANS 60269-4:2009/IEC 60269-4:2009.Examples of standardized systems of fuses A to F Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices High-voltage test techniques . 4 (SABS IEC 60305) 3 1 1 3 2 High-voltage fuses Part 2: Expulsion fuses 2 Insulators for overhead lines with a nominal voltage above 1 000 V . Ed.1 (SABS IEC 60309-2) 3.1 Edition Title 1. 8. Ed. IDT. Ed. Ed. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60227-2:2006/IEC 60227-2:2003. IDT. systems . Ed. 5 (SABS IEC 60269-4) SANS 60270:2000/IEC 60270:2000. 1 (SABS IEC 60252-1) SANS 60252-2:2004/IEC 60252-2:2003. 6 (SABS IEC 60282-1) SANS 60282-2:2008/IEC 60282-2:2008. IDT. IDT. 3 (SABS IEC 60270) SANS 60273:1990/IEC 60273:1990. IDT. Ed. IDT. Ed.02 SANS 60238:2009/IEC 60238:2008. Ed. 4 (SABS IEC 60254-2) SANS 60265-1:1998/IEC 60265-1:1998.01 Page 267 . Ed. 4 (SABS IEC 60269-1) SANS 60269-2:2007/IEC 60269-2:2006. IDT. 3 (SABS IEC 60273) SANS 60282-1:2006/IEC 60282-1:2005. 3 (SABS IEC 60265-1) SANS 60265-2:1988/IEC 60265-2:1988.01 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 2: Test methods Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) Edison screw lampholders SANS 60227-5:2006/IEC 60227-5:2003. 2. Ed.2 1.Partial discharge measurements Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1 000 V High-voltage fuses Part 1: Current-limiting fuses SANS 60269-3:2007/IEC 60269-3:2006. 1 (SABS IEC 60265-2) SANS 60269-1:2007/IEC 60269-1:2006. IDT.Ceramic or glass insulator units for a. testing and rating . IDT. IDT. socket-outlets and couplers for industrial purposes Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories SANS 60309-1:2006/IEC 60309-1:2005. IDT.1 (SABS IEC 60238) SANS 60252-1:2001/IEC 60252-1:2001. 4. Ed. 4. 2.01 1 AC motor capacitors Part 1: General . IDT.01 3. 3 (SABS IEC 60269-2) 3 Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells High-voltage switches Part 1: Switches for rated voltages above 1 kV and less than 52 kV High-voltage switches Part 2: High-voltage switches for rated voltages of 52 kV and above Low-voltage fuses Part 1: General requirements 2 1 3 2 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) Examples of standardized systems of fuses A to I Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) . Ed. IDT. Ed.Performance. Ed.Characteristics of insulator units of the cap and pin type Plugs. IDT.c. 3 (SABS IEC 60282-2) SANS 60305:1995/IEC 60305:1995. Ed. 2 (SABS IEC 60317-4) SANS 60317-8:2007/IEC 60317-8:1997. 2. Ed.01 1. Ed. class 180 Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire. IDT.6/1. 1.Enamelled round copper wire Specifications for particular types of winding wires Part 0-2: General requirements . 3. Ed. 2 1 (SABS IEC 60317-12) SANS 60317-13:1997/IEC 60317-13:1997. Ed. Ed. 3.2 (SABS IEC 60317-8) SANS 60317-12:1990/IEC 60317-12:1990. IDT. Ed. IDT. 1 1 Page 268 .Methods for measuring performance Specifications for particular types of winding wires Part 0-1: General requirements . 1 Edition Title 1 Plugs. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60309-4:2006/IEC 60309-4:2006. 1 3 SANS 60317-4:2007/IEC 60317-4:2000.02 1. IDT. Ed. IDT. Ed. IDT. class 130 Specifications for particular types of winding wires Part 8: Polyesterimide enamelled round copper wire. IDT.Enamelled round aluminium wire Specifications for particular types of winding wires Part 4: Solderable polyurethane enamelled round copper wires. IDT. class 220 Appliance couplers for household and similar general purposes Part 1: General requirements Appliance couplers for household and similar general purposes Part 2-1: Sewing machine couplers Appliance couplers for household and similar general purposes Part 2-3: Appliance couplers with a degree of protection higher than IPX0 Tests for electric cables under fire conditions Circuit integrity Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0. class 120 Specifications for particular types of winding wires Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire. 1. Ed.0 kV tested in a metal enclosure SANS 60311:2003/IEC 60311:2002. 4 (SABS IEC 60311) 3 SANS 60317-0-1:2006/IEC 60317-0-1:2005.Enamelled rectangular copper wire Specifications for particular types of winding wires Part 0-3: General requirements . Ed. class 200 Specifications for particular types of winding wires Part 100: Enamelled round copper wire.0 kV and with an overall diameter not exceeding 20 mm Tests for electric cables under fire conditions Circuit integrity Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0.01 SANS 60320-2-1:2000/IEC 60320-2-1:2000. Ed. 1 1 SANS 60331-2:2009/IEC 60331-2:2009. 2. MOD.02 2.2 (SABS IEC 60317-0-1) SANS 60317-0-2:2009/IEC 60317-0-2:2005. Ed. 1 3. IDT.02 2.6/1.1 (SABS IEC 60320-1) 3.02 SANS 60317-100:2003/IEC 60317-7:1997. 1 2 (SABS IEC 60320-2-1) SANS 60320-2-3:2005/IEC 60320-2-3:2005. Ed. IDT.6/1. 1 1 SANS 60331-3:2009/IEC 60331-3:2009. Ed. IDT.1 (SABS IEC 60320-2-3) SANS 60331-1:2009/IEC 60331-1:2009.2 (SABS IEC 60317-13) 1. IDT. 2. IDT.0 kV and with an overall diameter exceeding 20 mm Tests for electric cables under fire conditions Circuit integrity Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0. IDT.2 SANS 60317-0-3:2008/IEC 60317-0-3:2008. socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without interlock Electric irons for household or similar use .2 SANS 60320-1:2008/IEC 60320-1:2007. Ed.02 1. IDT. IDT. 1 1 SANS 60332-1-2:2005/IEC 60332-1-2:2004. 1 1 SANS 60332-2-2:2005/IEC 60332-2-2:2004. Ed. IDT.1 (SABS IEC 60332-3-10) SANS 60332-3-21:2000/IEC 60332-3-21:2000. Ed.1 (SABS IEC 60332-3-22) SANS 60332-3-23:2009/IEC 60332-3-23:2009. Ed.6/1. IDT. Ed. 1 1 SANS 60332-3-10:2009/IEC 60332-3-10:2009.Circuit integrity Part 31: Procedures and requirements for fire with shock . Ed. 1 1 SANS 60332-2-1:2005/IEC 60332-2-1:2004. 1 1 SANS 60332-1-3:2005/IEC 60332-1-3:2004.1 (SABS IEC 60332-3-23) 1. 1. Ed. IDT.Optical fibre cables Test for electric cables under fire conditions . IDT. 1 1 SANS 60331-21:1999/IEC 60331-21:1999. IDT. 1 1 (SABS IEC 60331-21) SANS 60331-23:1999/IEC 60331-23:1999. IDT. IDT. 1. Ed. Ed.Cables of rated voltage up to and including 0.Procedure for diffusion flame Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables Apparatus Tests on electric cables under fire conditions Part 321: Test for vertical flame spread of verticallymounted bunched wires or cables .6/1 kV Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable Apparatus Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable Procedure for determination of flaming droplets/particles Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable . Ed. 1 1 (SABS IEC 60331-25) SANS 60331-31:2003/IEC 60331-31:2002.01 1 1. 1. IDT. IDT. Ed. Ed. IDT.Cables of rated voltage up to and including 0. IDT.0 kV Tests for electric cables under fire conditions Circuit integrity Part 23: Procedures and requirements . Ed. 1 1 (SABS IEC 60331-23) SANS 60331-25:1999/IEC 60331-25:1999. Ed. 1.Category A F/R Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables Category A Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables Category B SANS 60331-12:2003/IEC 60331-12:2002. Ed.01 Page 269 .Standards available in electronic format (PDF) October 2009 SANS Number SANS 60331-11:2009/IEC 60331-11:2009.Fire with shock at a temperature of at least 830 degrees C Tests for electric cables under fire conditions Circuit integrity Part 21: Procedures and requirements . IDT.Apparatus Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable . IDT.Electric data cables Tests for electric cables under fire conditions Circuit integrity Part 25: Procedures and requirements .01 1.Fire alone at a flame temperature of at least 750 °C Tests for electric cables under fire conditions Circuit integrity Part 12: Apparatus . 1 (SABS IEC 60332-3-21) SANS 60332-3-22:2009/IEC 60332-3-22:2009.01 Tests for electric cables under fire conditions Circuit integrity Part 11: Apparatus . Ed.1 (SABS IEC 60331-11) Edition Title 1. 1 1 SANS 60332-1-1:2005/IEC 60332-1-1:2004. IDT. IDT.01 5.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60332-3-24:2009/IEC 60332-3-24:2009.01 5.02 4.1 (SABS IEC 60335-2-14) 2.1 (SABS IEC 60335-2-12) SANS 60335-2-13:2008/IEC 60335-2-13:2008. 4.Safety Part 2-13: Particular requirements for deep fat fryers. IDT.1 (SABS IEC 60335-2-2) SANS 60335-2-3:2006/IEC 60335-2-3:2005.Safety Part 2-14: Particular requirements for kitchen machines 1. IDT. Ed.1 (SABS IEC 60335-2-11) SANS 60335-2-12:2003/IEC 60335-2-12:2002. 6. toasters and similar portable cooking appliances Household and similar electrical appliances . IDT. Ed. Ed. IDT. ovens and similar appliances Household and similar electrical appliances .1 (SABS IEC 60332-3-24) SANS 60332-3-25:2009/IEC 60332-3-25:2009. 3 6 (SABS IEC 60335-2-4) SANS 60335-2-5:2009/IEC 60335-2-5:2008. IDT. Ed.Safety Part 2-7: Particular requirements for washing machines Household and similar electrical appliances . IDT. IDT. hobs.1 (SABS IEC 60335-2-8) SANS 60335-2-9:2004/IEC 60335-2-9:2004. Ed.01 Page 270 . Ed.01 5. Ed.02 SANS 60335-2-2:2005/IEC 60335-2-2:2004. Ed. IDT.01 Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables Category C Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables Category D Household and similar electrical appliances .01 3. Ed. IDT. 2.Safety Part 2-8: Particular requirements for shavers.02 5. 1.01 2. IDT.02 5.Safety Part 2-3: Particular requirements for electric irons Household and similar electrical appliances . hair clippers and similar appliances Household and similar electrical appliances . Ed.2 (SABS IEC 60335-2-5) SANS 60335-2-6:2008/IEC 60335-2-6:2008.1 (SABS IEC 60332-3-25) SANS 60335-1:2007/IEC 60335-1:2006.Safety Part 2-11: Particular requirements for tumble dryers Household and similar electrical appliances .Safety Part 1: General requirements Household and similar electrical appliances . 5. Ed. 5.2 (SABS IEC 60335-1) Edition Title 1.2 (SABS IEC 60335-2-6) SANS 60335-2-7:2009/IEC 60335-2-7:2008. 3.Safety Part 2-12: Particular requirements for warming plates and similar appliances Household and similar electrical appliances . 5. Ed.01 2. 3. 3.1 (SABS IEC 60335-2-3) SANS 60335-2-4:2009/IEC 60335-2-4:2008. IDT. 1. IDT. Ed.Safety Part 2-5: Particular requirements for dishwashers Household and similar electrical appliances .01 5. IDT.2 (SABS IEC 60335-2-13) SANS 60335-2-14:2009/IEC 60335-2-14:2008. frying pans and similar appliances Household and similar electrical appliances .Safety Part 2-9: Particular requirements for grills. Ed.Safety Part 2-4: Particular requirements for spin extractors Household and similar electrical appliances .Safety Part 2-12: Particular requirements for warming plates and similar appliances Household and similar electrical appliances . IDT.Safety Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines Household and similar electrical appliances . 5 7 (SABS IEC 60335-2-7) SANS 60335-2-8:2009/IEC 60335-2-8:2005. 3.Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances Household and similar electrical appliances . Ed.Safety Part 2-6: Particular requirements for stationary cooking ranges. 2.1 (SABS IEC 60335-2-9) SANS 60335-2-10:2009/IEC 60335-2-10:2008. IDT. Ed. IDT. 5.01 2 2.1 (SABS IEC 60335-2-10) SANS 60335-2-11:2003/IEC 60335-2-11:2003. 5 (SABS IEC 60335-2-12) SANS 60335-2-12:2009/IEC 60335-2-12:2008. Ed. Standards available in electronic format (PDF) October 2009 SANS Number SANS 60335-2-15:2009/IEC 60335-2-15:2005, IDT, Ed. 5.1 (SABS IEC 60335-2-15) SANS 60335-2-16:2003/IEC 60335-2-16:2002, IDT, Ed. 5 (SABS IEC 60335-2-16) SANS 60335-2-17:2008/IEC 60335-2-17:2006, IDT, Ed. 2.1 (SABS IEC 60335-2-17) SANS 60335-2-21:2000/IEC 60335-2-21:1997, MOD (SABS 60335-2-21) SANS 60335-2-23:2008/IEC 60335-2-23:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-23) SANS 60335-2-24:2003/IEC 60335-2-24:2002, IDT, Ed. 6 (SABS IEC 60335-2-24) SANS 60335-2-25:2006/IEC 60335-2-25:2005, IDT, Ed. 5.1 (SABS IEC 60335-2-25) SANS 60335-2-26:2009/IEC 60335-2-26:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-26) SANS 60335-2-27:2007/IEC 60335-2-27:2007, IDT, Ed. 4.2 (SABS IEC 60335-2-27) SANS 60335-2-28:2009/IEC 60335-2-28:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-28) SANS 60335-2-29:2005/IEC 60335-2-29:2004, IDT, Ed. 4.1 (SABS IEC 60335-2-29) SANS 60335-2-30:2008/IEC 60335-2-30:2004, IDT, Ed. 4.2 (SABS IEC 60335-2-30) SANS 60335-2-31:2009/IEC 60335-2-31:2009, IDT, Ed. 4.2 (SABS IEC 60335-2-31) SANS 60335-2-32:2008/IEC 60335-2-32:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-32) SANS 60335-2-34:2004/IEC 60335-2-34:2002, IDT, Ed. 4 (SABS IEC 60335-2-34) SANS 60335-2-35:2007/IEC 60335-2-35:2003, IDT, Ed. 4.1 (SABS IEC 60335-2-35) SANS 60335-2-36:2006/IEC 60335-2-36:2005, IDT, Ed. 5.1 (SABS IEC 60335-2-36) Edition Title 3.01 Household and similar electrical appliances - Safety Part 2-15: Particular requirements for appliances for heating liquids Household and similar electrical appliances - Safety Part 2-16: Particular requirements for food waste disposers Household and similar electrical appliances - Safety Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances Safety of household and similar electrical appliances Part 2-21: Particular requirements for storage water heaters Household and similar electrical appliances - Safety Part 2-23: Particular requirements for appliances for skin or hair care Household and similar electrical appliances - Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers Household and similar electrical appliances - Safety Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks Household and similar electrical appliances - Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Household and similar electrical appliances - Safety Part 2-28: Particular requirements for sewing machines Household and similar electrical appliances - Safety Part 2-29: Particular requirements for battery chargers Household and similar electrical appliances - Safety Part 2-30: Particular requirements for room heaters Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors Household and similar electrical appliances - Safety Part 2-32: Particular requirements for massage appliances Household and similar electrical appliances - Safety Part 2-34: Particular requirements for motorcompressors Household and similar electrical appliances - Safety Part 2-35: Particular requirements for instantaneous water heaters Household and similar electrical appliances - Safety Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements 3 2.01 1 3.01 4 3.01 3.01 3.02 3.01 3.01 3.02 3.02 3.01 4 3.01 4.01 Page 271 Standards available in electronic format (PDF) October 2009 SANS Number SANS 60335-2-37:2009/IEC 60335-2-37:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-37) SANS 60335-2-38:2009/IEC 60335-2-38:2008, IDT, Ed. 5.1 (SABS IEC 60335-2-38) SANS 60335-2-39:2009/IEC 60335-2-39:2008, IDT, Ed. 5.2 (SABS IEC 60335-2-39) SANS 60335-2-40:2006/IEC 60335-2-40:2005, IDT, Ed. 4.2 (SABS IEC 60335-2-40) SANS 60335-2-41:2004/IEC 60335-2-41:2004, IDT, Ed. 3.1 (SABS IEC 60335-2-41) SANS 60335-2-42:2003/IEC 60335-2-42:2002, IDT, Ed. 5 (SABS IEC 60335-2-42) SANS 60335-2-43:2009/IEC 60335-2-43:2008, IDT, Ed. 3.2 (SABS IEC 60335-2-43) SANS 60335-2-44:2009/IEC 60335-2-44:2009, IDT, Ed. 3.1 (SABS IEC 60335-2-44) SANS 60335-2-45:2003/IEC 60335-2-45:2002, IDT, Ed. 3 (SABS IEC 60335-2-45) SANS 60335-2-47:2003/IEC 60335-2-47:2002, IDT, Ed. 4 (SABS IEC 60335-2-47) SANS 60335-2-48:2009/IEC 60335-2-48:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-48) SANS 60335-2-49:2009/IEC 60335-2-49:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-49) SANS 60335-2-50:2008/IEC 60335-2-50:2008, IDT, Ed. 4.1 (SABS IEC 60335-2-50) SANS 60335-2-51:2009/IEC 60335-2-51:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-51) SANS 60335-2-52:2009/IEC 60335-2-52:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-52) SANS 60335-2-53:2007/IEC 60335-2-53:2007, IDT, Ed. 3.1 (SABS IEC 60335-2-53) Edition Title 3.01 Household and similar electrical appliances - Safety Part 2-37: Particular requirements for commercial electric deep fat fryers Household and similar electrical appliances - Safety Part 2-38: Particular requirements for commercial electric griddles and griddle grills Household and similar electrical appliances - Safety Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans Household and similar electrical appliances - Safety Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps Household and similar electrical appliances - Safety Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens Household and similar electrical appliances - Safety Part 2-43: Particular requirements for clothes dryers and towel rails Household and similar electrical appliances - Safety Part 2-44: Particular requirements for ironers Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and similar appliances Household and similar electrical appliances - Safety Part 2-47: Particular requirements for commercial electric boiling pans Household and similar electrical appliances - Safety Part 2-48: Particular requirements for commercial electric grillers and toasters Household and similar electrical appliances - Safety Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm Household and similar electrical appliances - Safety Part 2-50: Particular requirements for commercial electric bains-marie Household and similar electrical appliances - Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations Household and similar electrical appliances - Safety Part 2-52: Particular requirements for oral hygiene appliances Household and similar electrical appliances - Safety Part 2-53: Particular requirements for sauna heating appliances 4.01 4.02 3.02 3.01 4 3.02 3.01 3 4 4.01 4.01 4.01 3.01 3.01 3.01 Page 272 Standards available in electronic format (PDF) October 2009 SANS Number SANS 60335-2-53:2003/IEC 60335-2-53:2002, IDT, Ed. 3 (SABS IEC 60335-2-53) SANS 60335-2-54:2009/IEC 60335-2-54:2008, IDT, Ed. 4 (SABS IEC 60335-2-54) SANS 60335-2-55:2009/IEC 60335-2-55:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-55) SANS 60335-2-56:2009/IEC 60335-2-56:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-56) SANS 60335-2-58:2009/IEC 60335-2-58:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-58) SANS 60335-2-59:2003/IEC 60335-2-59:2002, IDT, Ed. 3 (SABS IEC 60335-2-59) SANS 60335-2-60:2009/IEC 60335-2-60:2008, IDT, Ed. 3.2 (SABS IEC 60335-2-60) SANS 60335-2-61:2007/IEC 60335-2-61:2005, IDT, Ed. 2.1 (SABS IEC 60335-2-61) SANS 60335-2-62:2008/IEC 60335-2-62:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-62) SANS 60335-2-64:2008/IEC 60335-2-64:2008, IDT, Ed. 3.1 (SABS IEC 60335-2-64) SANS 60335-2-65:2009/IEC 60335-2-65:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-65) SANS 60335-2-66:2009/IEC 60335-2-66:2009, IDT, Ed. 2.1 (SABS IEC 60335-2-66) SANS 60335-2-67:2003/IEC 60335-2-67:2002, IDT, Ed. 3 (SABS IEC 60335-2-67) SANS 60335-2-68:2007/IEC 60335-2-68:2007, IDT, Ed. 3.2 (SABS IEC 60335-2-68) SANS 60335-2-69:2008/IEC 60335-2-69:2008, IDT, Ed. 3.2 (SABS IEC 60335-2-69) SANS 60335-2-70:2007/IEC 60335-2-70:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-70) Edition Title 3 Household and similar electrical appliances - Safety Part 2-53: Particular requirements for sauna heating appliances Household and similar electrical appliances - Safety Part 2-54: Particular requirements for surfacecleaning appliances for household use employing liquids or steam Household and similar electrical appliances - Safety Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances Household and similar electrical appliances - Safety Part 2-58: Particular requirements for commercial electric dishwashing machines Household and similar electrical appliances - Safety Part 2-59: Particular requirements for insect killers Household and similar electrical appliances - Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool spas Household and similar electrical appliances - Safety Part 2-61: Particular requirements for thermalstorage room heaters Household and similar electrical appliances - Safety Part 2-62: Particular requirements for commercial electric rinsing sinks Household and similar electrical appliances - Safety Part 2-64: Particular requirements for commercial electric kitchen machines Household and similar electrical appliances - Safety Part 2-65: Particular requirements for air-cleaning appliances Household and similar electrical appliances - Safety Part 2-66: Particular requirements for water-bed heaters Household and similar electrical appliances - Safety Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use Household and similar electrical appliances - Safety Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use Household and similar electrical appliances - Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use Household and similar electrical appliances - Safety Part 2-70: Particular requirements for milking machines 4 3.01 3.01 3.01 3 3.02 2.01 3.01 3.01 2.01 2.01 3 3.02 3.02 2.01 Page 273 Standards available in electronic format (PDF) October 2009 SANS Number SANS 60335-2-71:2007/IEC 60335-2-71:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-71) SANS 60335-2-72:2003/IEC 60335-2-72:2002, IDT, Ed. 2 (SABS IEC 60335-2-72) SANS 60335-2-73:2003/IEC 60335-2-73:2002, IDT, Ed. 2 (SABS IEC 60335-2-73) SANS 60335-2-74:2003/IEC 60335-2-74:2002, IDT, Ed. 2 (SABS IEC 60335-2-74) SANS 60335-2-75:2009/IEC 60335-2-75:2009, IDT, Ed. 2.2 (SABS IEC 60335-2-75) SANS 60335-2-76:2006/IEC 60335-2-76:2006, IDT, Ed. 2.1 (SABS IEC 60335-2-76) SANS 60335-2-77:2006/IEC 60335-2-77:1996, MOD (SABS 60335-2-77) SANS 60335-2-78:2003/IEC 60335-2-78:2002, IDT, Ed. 2 (SABS IEC 60335-2-78) SANS 60335-2-79:2008/IEC 60335-2-79:2007, IDT, Ed. 2.2 (SABS IEC 60335-2-79) SANS 60335-2-80:2009/IEC 60335-2-80:2008, IDT, Ed. 2.2 (SABS IEC 60335-2-80) SANS 60335-2-81:2007/IEC 60335-2-81:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-81) SANS 60335-2-82:2009/IEC 60335-2-82:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-82) SANS 60335-2-83:2009/IEC 60335-2-83:2008, IDT, Ed. 1.1 SANS 60335-2-84:2009/IEC 60335-2-84:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-84) SANS 60335-2-85:2009/IEC 60335-2-85:2008, IDT, Ed. 2.1 (SABS IEC 60335-2-85) SANS 60335-2-86:2003/IEC 60335-2-86:2002, IDT, Ed. 2 (SABS IEC 60335-2-86) SANS 60335-2-87:2008/IEC 60335-2-87:2007, IDT, Ed. 2.1 (SABS IEC 60335-2-87) Edition Title 2.01 Household and similar electrical appliances - Safety Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals Household and similar electrical appliances - Safety Part 2-72: Particular requirements for automatic machines for floor treatment for commercial and industrial use Household and similar electrical appliances - Safety Part 2-73: Particular requirements for fixed immersion heaters Household and similar electrical appliances - Safety Part 2-74: Particular requirements for portable immersion heaters Household and similar electrical appliances - Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines Household and similar electrical appliances - Safety Part 2-76: Particular requirements for electric fence energizers Safety of household and similar electrical appliances Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers Household and similar electrical appliances - Safety Part 2-78: Particular requirements for outdoor barbecues Household and similar electrical appliances - Safety Part 2-79: Particular requirements for high pressure cleaners and steam cleaners Household and similar electrical appliances - Safety Part 2-80: Particular requirements for fans Household and similar electrical appliances - Safety Part 2-81: Particular requirements for foot warmers and heating mats Household and similar electrical appliances - Safety Part 2-82: Particular requirements for amusement machines and personal service machines Household and similar electrical appliances - Safety Part 2-83: Particular requirements for heated gullies for roof drainage Household and similar electrical appliances - Safety Part 2-84: Particular requirements for toilets Household and similar electrical appliances - Safety Part 2-85: Particular requirements for fabric steamers Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical animal-stunning equipment 2 2 2 2.02 2.01 1.01 2 2.02 2.02 2.01 2.01 1.01 2.01 2.01 2 2.01 Page 274 Standards available in electronic format (PDF) October 2009 SANS Number SANS 60335-2-88:2003/IEC 60335-2-88:2002, IDT, Ed. 2 (SABS IEC 60335-2-88) SANS 60335-2-89:2007/IEC 60335-2-89:2007, IDT, Ed. 1.2 Edition Title 2 Household and similar electrical appliances - Safety Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or airconditioning systems Household and similar electrical appliances - Safety Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor Household and similar electrical appliances - Safety Part 2-90: Particular requirements for commercial microwave ovens Household and similar electrical appliances - Safety Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers Household and similar electrical appliances - Safety Part 2-92: Particular requirements for pedestriancontrolled mains-operated lawn scarifiers and aerators Household and similar electrical appliances - Safety Part 2-94: Particular requirements for scissors type grass shears Household and similar electrical appliances - Safety Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use Household and similar electrical appliances - Safety Part 2-96: Particular requirements for flexible sheet heating elements for room heating Household and similar electrical appliances - Safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment Household and similar electrical appliances - Safety Part 2-98: Particular requirements for humidifiers Household and similar electrical appliances - Safety Part 2-99: Particular requirements for commercial electric hoods Household and similar electrical appliances - Safety Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums Household and similar electrical appliances - Safety Part 2-101: Particular requirements for vaporizers Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections Household and similar electrical appliances - Safety Part 2-103: Particular requirements for drives for gates, doors and windows 1.02 SANS 60335-2-90:2004/IEC 60335-2-90:2003, IDT, Ed. 2.1 (SABS IEC 60335-2-90) SANS 60335-2-91:2008/IEC 60335-2-91:2008, IDT, Ed. 3 (SABS IEC 60335-2-91) SANS 60335-2-92:2003/IEC 60335-2-92:2002, IDT, Ed. 2 (SABS IEC 60335-2-92) SANS 60335-2-94:2008/IEC 60335-2-94:2008, IDT, Ed. 3 (SABS IEC 60335-2-94) SANS 60335-2-95:2006/IEC 60335-2-95:2005, IDT, Ed. 2.1 (SABS IEC 60335-2-95) SANS 60335-2-96:2009/IEC 60335-2-96:2008, IDT, Ed. 1.2 SANS 60335-2-97:2009/IEC 60335-2-97:2009, IDT, Ed. 2.2 (SABS IEC 60335-2-97) SANS 60335-2-98:2005/IEC 60335-2-98:2005, IDT, Ed. 2.1 (SABS IEC 60335-2-98) SANS 60335-2-99:2003/IEC 60335-2-99:2003, IDT, Ed. 1 SANS 60335-2-100:2003/IEC 60335-2-100:2002, IDT, Ed. 1 2.01 3 2 3 2.01 1.02 2.02 2.01 1 1 SANS 60335-2-101:2009/IEC 60335-2-101:2008, IDT, Ed. 1.1 SANS 60335-2-102:2009/IEC 60335-2-102:2008, IDT, Ed. 1.1 1.01 1.01 SANS 60335-2-103:2003/IEC 60335-2-103:2002, IDT, Ed. 1 1 Page 275 Standards available in electronic format (PDF) October 2009 SANS Number SANS 60335-2-104:2003/IEC 60335-2-104:2003, IDT, Ed. 1 Edition Title 1 Household and similar electrical appliances - Safety Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower cabinets Household and similar electrical appliances - Safety Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance Locking devices for ball and socket couplings of string insulator units - Dimensions and tests Insulators for overhead lines with a nominal voltage above 1 000 V Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria Insulators for overhead lines with a nominal voltage above 1 000 V Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria Fixed capacitors for use in electronic equipment Part 1: Generic specification Fixed capacitors for use in electronic equipment Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors Fixed capacitors for use in electronic equipment Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ Fixed capacitors for use in electronic equipment Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (Mn02) and non-solid electrolyte Fixed capacitors for use in electronic equipment Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. capacitors Fixed capacitors for use in electronic equipment Part 6-1: Blank detail specification: Fixed metallized polycarbonate film dielectric d.c. capacitors Assessment level E Fixed capacitors for use in electronic equipment Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D Lampholders for tubular fluorescent lamps and starterholders SANS 60335-2-105:2008/IEC 60335-2-105:2008, IDT, Ed. 1.1 SANS 60335-2-106:2007/IEC 60335-2-106:2007, IDT, Ed. 1 1.01 1 SANS 60350:2006/IEC 60350:2005, IDT, Ed. 2.1 (SABS IEC 60350) SANS 60372:1984/IEC 60372:1984, IDT, Ed. 3 (SABS IEC 60372) SANS 60383-1:1993/IEC 60383-1:1993, IDT, Ed. 4 (SABS IEC 60383-1) 1.01 1 1 SANS 60383-2:1993/IEC 60383-2:1993, IDT, Ed. 1 (SABS IEC 60383-2) 1 SANS 60384-1:1999/IEC 60384-1:1999, IDT, Ed. 3 (SABS IEC 60384-1) SANS 60384-2:2007/IEC 60384-2:2005, IDT, Ed. 3 (SABS IEC 60384-2) 2 2 SANS 60384-2-1:2007/IEC 60384-2-1:2005, IDT, Ed. 2 2 (SABS IEC 60384-2-1) SANS 60384-4:2007/IEC 60384-4:2007, IDT, Ed. 4 (SABS IEC 60384-4) 2 SANS 60384-6:2007/IEC 60384-6:2005, IDT, Ed. 3 (SABS IEC 60384-6) 2 SANS 60384-6-1:2007/IEC 60384-6-1:2005, IDT, Ed. 2 2 (SABS IEC 60384-6-1) SANS 60384-14:2007/IEC 60384-14:2005, IDT, Ed. 3 2 (SABS IEC 60384-14) SANS 60384-14-1:2007/IEC 60384-14-1:2005, IDT, Ed. 2 (SABS IEC 60384-14-1) 2 SANS 60400:2008/IEC 60400:2008, IDT, Ed. 7 (SABS IEC 60400) 4 Page 276 01 1. IDT. Ed.Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Incandescent lamps .1 (SABS IEC 60432-2) SANS 60432-3:2005/IEC 60432-3:2005.1 (SABS IEC 60432-1) SANS 60432-2:2006/IEC 60432-2:2005.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60423:2008/IEC 60423:2007. Ed. 4. 1.01 1. Ed. IDT. Ed. 1. Ed. 2 (SABS IEC 60471) SANS 60478-4:1976/IEC 60478-4:1976. IDT. 1 SANS 60479-3:1998/IEC 60479-3:1998. IDT. 2 (SABS IEC 60439-5) SANS 60456:2007/IEC 60456:2003.Distribution boards Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS) Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies for power distribution in public networks Clothes washing machines for household use Methods for measuring the performance High-voltage alternating current contactors and contactor-based motor-starters Dimensions of clevis and tongue couplings of string insulator units Stabilized power supplies. Ed. IDT. Ed. 4 (SABS IEC 60456) SANS 60470:2008/IEC 60470:2000. IDT.02 SANS 60439-4:2005/IEC 60439-4:2004.Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes Incandescent lamps .01 2. IDT. Ed.1 (SABS IEC 60439-2) SANS 60439-3:2007/IEC 60439-3:2001. IDT.Outside diameters of conduits for electrical installations and threads for conduits and fittings Incandescent lamps . Ed. 3 (SABS IEC 60479-2) SANS 60479-4:2005/IEC TR 60479-4:2004.1 (SABS IEC 60439-1) SANS 60439-2:2006/IEC 60439-2:2005. 2 (SABS IEC 60470) SANS 60471:1977/IEC 60471:1977.c. 4 (SABS IEC 60479-1) SANS 60479-2:2007/IEC TS 60479-2:2007.1 Edition Title 2 Conduit systems for cable management . 1 (SABS IEC 60478-4) SANS 60479-1:2006/IEC TS 60479-1:2005. IDT. Ed.01 SANS 60439-1:2004/IEC 60439-1:2004. Ed. 2. d. 1 (SABS IEC 60479-3) SANS 60496:1975/IEC 60496:1975. 3. 1 (SABS IEC 60496) 2 2 2 2 1 1 2 2 1 1 1 Page 277 . output Part 4: Tests other than radio-frequency interference Effects of current on human beings and livestock Part 1: General aspects Effects of current on human beings and livestock Part 2: Special aspects Effects of current on human beings and livestock Part 4: Effects of lightning strokes on human beings and livestock Effects of current on human beings and livestock Part 3: Effects of currents passing through the body of livestock Methods for measuring the performance of electric warming plates for household and similar purposes 1.01 1. Ed. IDT. IDT. IDT. 2. Ed.2 (SABS IEC 60439-3) 3. IDT.Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle) Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies Low-voltage switchgear and controlgear assemblies Part 2: Particular requirements for busbar trunking systems (busways) Low-voltage switchgear and controlgear assemblies Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use . IDT. Ed. Ed. Ed. Ed. IDT. 2 (SABS IEC 60439-4) SANS 60439-5:2006/IEC 60439-5:2006. IDT. 3 (SABS IEC 60423) SANS 60432-1:2006/IEC 60432-1:2005. IDT. IDT. Ed. 1 2. IDT. IDT. Ed. 1 2 (SABS IEC 60598-2-5) SANS 60598-2-6:1994/IEC 60598-2-6:1994. Ed. IDT. Ed. IDT. 1.01 1 2 5 Luminaires Part 1: General requirements and tests SANS 60598-2-1:1979/IEC 60598-2-1:1979. Ed. Ed. Ed. 1 (SABS IEC 60530) SANS 60570:2003/IEC 60570:2003. Ed. Ed. 2 3 (SABS IEC 60598-2-3) SANS 60598-2-4:1997/IEC 60598-2-4:1997. 2 (SABS IEC 60502-4) Edition Title 2 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1. Ed. IDT. 1 1 (SABS IEC 60598-2-1) SANS 60598-2-2:1997/IEC 60598-2-2:1997. 2 (SABS IEC 60598-2-10) SANS 60598-2-11:2006/IEC 60598-2-11:2005.1 (SABS IEC 60529) SANS 60530:1975/IEC 60530:1975. 1 2 Luminaires Part 2: Particular requirements Section 1: Fixed general purpose luminaires Luminaires Part 2: Particular requirements Section 2: Recessed luminaires Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting Luminaires Part 2: Particular requirements Section 4: Portable general purpose luminaires Luminaires Part 2-5: Particular requirements Floodlights Luminaires Part 2: Particular requirements Section 6: Luminaires with built-in transformers or convertors for filament lamps Luminaires Part 2: Particular requirements Section 7: Portable luminaires for garden use Luminaires Part 2-8: Particular requirements Handlamps Luminaires Part 2: Particular requirements Section 9: Photo and film luminaires (non-professional) Luminaires Part 2-10: Particular requirements Portable luminaires for children Luminaires Part 2-11: Particular requirements Aquarium luminaires 1 Page 278 . IDT. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60502-4:2006/IEC 60502-4:2005. IDT.2 (SABS IEC 60598-2-8) SANS 60598-2-9:1987/IEC 60598-2-9:1987. 4 (SABS IEC 60570) SANS 60598-1:2009/IEC 60598-1:2008. Ed. 1 (SABS IEC 60514) SANS 60529:2001/IEC 60529:2001. Ed. IDT.02 2. 1 1 (SABS IEC 60598-2-7) SANS 60598-2-8:2008/IEC 60598-2-8:2007. IDT. 2.2 kV) up to 30 kV (Um = 36 kV) Acceptance inspection of Class 2 alternating-current watthour meters Degrees of protection provided by enclosures (IP Code) Methods for measuring the performance of electric kettles and jugs for household and similar use Electrical supply track systems for luminaires SANS 60514:1975/IEC 60514:1975.1 (SABS IEC 60598-2-2) SANS 60598-2-3:2003/IEC 60598-2-3:2002. 1 2 (SABS IEC 60598-2-9) SANS 60598-2-10:2003/IEC 60598-2-10:2003. IDT. Ed. IDT. IDT. IDT. Ed. IDT. 1 2 (SABS IEC 60598-2-6) SANS 60598-2-7:1982/IEC 60598-2-7:1982. Ed. Ed.2 kV) up to 30 kV (Um = 36 kV) Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7. IDT. IDT. Ed. 1 2 (SABS IEC 60598-2-4) SANS 60598-2-5:1998/IEC 60598-2-5:1998. 7 (SABS IEC 60598-1) 1 1. 2 (SABS IEC 60598-2-18) SANS 60598-2-19:1981/IEC 60598-2-19:1981.2 (SABS IEC 60598-2-20) SANS 60598-2-23:2001/IEC 60598-2-23:2001. Ed. Ed. 1 (SABS IEC 60598-2-17) SANS 60598-2-18:1993/IEC 60598-2-18:1993. Ed. Ed. IDT. 1 5 SANS 60601-2-19:2009/IEC 60601-2-19:2009. 2 SANS 60601-2-20:2009/IEC 60601-2-20:2009.01 2. Ed. 3 (SABS IEC 60601-1) Edition Title 1 Luminaires Part 2-12: Particular requirements Mains socket-outlet mounted nightlights Luminaires Part 2-13: Particular requirements Ground recessed luminaires Luminaires Part 2: Particular requirements Section 17: Luminaires for stage lighting. Ed. IDT.1 (SABS IEC 60598-2-23) SANS 60598-2-24:1997/IEC 60598-2-24:1997. television. Ed. 1 1 SANS 60601-2-2:2009/IEC 60601-2-2:2009. 1 (SABS IEC 60598-2-24) SANS 60598-2-25:1994/IEC 60598-2-25:1994. IDT. IDT.Collateral standard: Electromagnetic compatibility . Ed. 2. 1.02 1. IDT. Ed. IDT. IDT.01 1 1 2 SANS 60601-1-2:2005/IEC 60601-1-2:2004. 2 1 1 1 Page 279 . IDT. IDT. Ed. 2 SANS 60601-2-21:2009/IEC 60601-2-21:2009. IDT. IDT. 1 (SABS IEC 60598-2-19) SANS 60598-2-20:2003/IEC 60598-2-20:2002.Collateral Standard: Requirements for the development of physiologic closed-loop controllers Medical electrical equipment Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators Medical electrical equipment Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators Medical electrical equipment Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers 1 1 1 1 1. IDT. film and photographic studios (outdoor and indoor) Luminaires Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications Luminaires Part 2: Particular requirements Section 19: Air-handling luminaires (safety requirements) Luminaires Part 2-20: Particular requirements Lighting chains Luminaires Part 2-23: Particular requirements Extra low voltage lighting systems for filament lamps Luminaires Part 2: Particular requirements Section 24: Luminaires with limited surface temperatures Luminaires Part 2-25: Particular requirements Luminaires for use in clinical areas of hospitals and health care buildings Medical electrical equipment Part 1: General requirements for basic safety and essential performance Medical electrical equipment Part 1-2: General requirements for safety . 1 (SABS IEC 60598-2-25) SANS 60601-1:2007/IEC 60601-1:2005. IDT. Ed.1 (SABS IEC 60601-1-2) SANS 60601-1-10:2009/IEC 60601-1-10:2007. IDT. Ed. Ed. 1 SANS 60598-2-13:2007/IEC 60598-2-13:2006. Ed. Ed. IDT. IDT. 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60598-2-12:2006/IEC 60598-2-12:2006. 1 SANS 60598-2-17:1984/IEC 60598-2-17:1984. Ed.Requirements and tests Medical electrical equipment Part 1-10: General requirements for basic safety and essential performance . 1 1 (SABS IEC 60614-2-3) SANS 60614-2-4:1985/IEC 60614-2-4:1985. IDT. Ed. IDT. Ed.01 4. Ed.02 1 1 1. 1 1 SANS 60670-1:2003/IEC 60670-1:2002.1 (SABS IEC 60669-2-1) SANS 60669-2-2:2007/IEC 60669-2-2:2006. Ed. Ed. IDT. IDT. IDT. Ed. 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60614-1:1994/IEC 60614-1:1994. IDT. Ed. Ed. IDT. IDT. IDT. 1 1 (SABS IEC 60614-2-1) SANS 60614-2-2:1980/IEC 60614-2-2:1980. 1 1 (SABS IEC 60614-2-4) SANS 60614-2-5:1992/IEC 60614-2-5:1992. 2 3 (SABS IEC 60669-2-3) SANS 60669-2-4:2005/IEC 60669-2-4:2004. IDT. IDT. 1 1 (SABS IEC 60614-2-7) SANS 60623:2001/IEC 60623:2001. IDT. 3. Ed. IDT. Ed. 2 3 (SABS IEC 60669-2-2) SANS 60669-2-3:2007/IEC 60669-2-3:2006.Vented nickel-cadmium prismatic rechargeable single cells Insulators .2 (SABS IEC 60669-1) 2.10 (SABS IEC 60662) SANS 60669-1:2007/IEC 60669-1:2007. IDT. Ed. IDT. 2 (SABS IEC 60614-1) Edition Title 1 Conduits for electrical installations . 3. IDT. Ed. Ed. Ed.Specification Part 1: General requirements Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 1: Metal conduits Specification for conduits for electrical installations Part 2: Particular specification for conduits Section 2: Rigid plain conduits of insulating materials Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 3: Pliable conduits of insulating material Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 4: Pliable self-recovering conduits of insulating materials Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 5: Flexible conduits Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 6: Pliable conduits of metal or composite materials Conduits for electrical installations .Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV High-pressure sodium vapour lamps SANS 60614-2-1:1982/IEC 60614-2-1:1982. 1 1 (SABS IEC 60614-2-5) SANS 60614-2-6:1992/IEC 60614-2-6:1992.1 Switches for household and similar fixed-electrical installations Part 1: General requirements Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches Switches for household and similar fixed electrical installations Part 2-2: Particular requirements Electromagnetic remote-control switches (RCS) Switches for household and similar fixed electrical installations Part 2-3: Particular requirements Time-delay switches (TDS) Switches for household and similar fixed electrical installations Part 2-4: Particular requirements Isolating switches Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements SANS 60669-2-1:2009/IEC 60669-2-1:2009. 1 1 (SABS IEC 60614-2-2) SANS 60614-2-3:1990/IEC 60614-2-3:1990. Ed. Ed. IDT. 2 (SABS IEC 60660) SANS 60662:2003/IEC 60662:2002.Specification Part 2: Particular specifications for conduits Section 7: Rigid non-threadable conduits of aluminium alloy Secondary cells and batteries containing alkaline or other non-acid electrolytes . 1 1 Page 280 . Ed. 1 1 (SABS IEC 60614-2-6) SANS 60614-2-7:1995/IEC 60614-2-7:1995. 4 (SABS IEC 60623) SANS 60660:1999/IEC 60660:1999. 1.2 (SABS IEC 60705) SANS 60720:1981/IEC 60720:1981.01 2. IDT.1 SANS 60705:2006/IEC 60705:2006. Ed.2 (SABS IEC 60730-1) 2. Ed. 1.2 SANS 60730-2-6:2007/IEC 60730-2-6:2007. IDT. Ed. Ed.1 (SABS IEC 60675) SANS 60694:2003/IEC 60694:2002. IDT. IDT. IDT. 1 (SABS IEC 60720) SANS 60728-2:2005/IEC 60728-2:2002. 2. IDT.50 W horizontal and vertical flame test methods Household microwave ovens .Methods for measuring performance Characteristics of line post insulators SANS 60670-21:2005/IEC 60670-21:2004. Ed. Ed.02 1. IDT. Ed. 1 1 SANS 60670-22:2003/IEC 60670-22:2003.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 21: Particular requirements for boxes and enclosures with provision for suspension means Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular requirements for connecting boxes and enclosures Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular requirements for floor boxes and enclosures Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular requirements for enclosures for housing protective devices and similar power consuming devices Household electric direct-acting room heaters Methods for measuring performance Common specifications for high-voltage switchgear and controlgear standards Fire hazard testing Part 11-10: Test flames . Ed. IDT. Ed. IDT. Ed. Ed. 2. IDT.01 2. 1 1 SANS 60675:2006/IEC 60675:1998.02 SANS 60730-2-2:2007/IEC 60730-2-2:2005. 1 2 Page 281 . 1 2 SANS 60730-2-4:2007/IEC 60730-2-4:2006.02 3. 1 1.1 SANS 60730-2-3:2007/IEC 60730-2-3:2006. 1 1 SANS 60670-23:2006/IEC 60670-23:2006. Ed. Ed. IDT. IDT. 3. 1 1 SANS 60670-24:2006/IEC 60670-24:2005.01 2. Ed. 3. Ed. Ed.02 1 1 Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment Automatic electrical controls for household and similar use Part 1: General requirements Automatic electrical controls for household and similar use Part 2-2: Particular requirements for thermal motor protectors Automatic electrical controls for household and similar use Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps Automatic electrical controls for household and similar use Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type Automatic electrical controls for household and similar use Part 2-5: Particular requirements for automatic electrical burner control systems Automatic electrical controls for household and similar use Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements SANS 60730-1:2007/IEC 60730-1:2007. 1. IDT. IDT. IDT. 1 2 SANS 60730-2-5:2009/IEC 60730-2-5:2008. IDT.2 (SABS IEC 60694) SANS 60695-11-10:2004/IEC 60695-11-10:2003. 2 1. 2 2 SANS 60730-2-8:2003/IEC 60730-2-8:2003. 1. IDT.2 SANS 60730-2-15:2008/IEC 60730-2-15:2008. IDT. IDT. Ed. IDT.2 (SABS IEC 60745-1) 2 3. IDT. including mechanical requirements Automatic electrical controls for household and similar use Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls. IDT. IDT. water flow and water level sensing controls Automatic electrical controls for household and similar use Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications Automatic electrical controls for household and similar use Part 2-17: Particular requirements for electrically operated gas valves. 2 2 (SABS IEC 60745-2-1) Page 282 . Ed. IDT.2 1. IDT.Safety Part 1: General requirements Hand-held motor-operated electric tools . Ed. Ed.02 2 SANS 60730-2-16:2007/IEC 60730-2-16:2001. Ed. Ed.Performance Hard water for testing Hand-held motor-operated electric tools .02 SANS 60734:2006/IEC 60734:2001.02 SANS 60730-2-17:2008/IEC 60730-2-17:2007. 1.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Automatic electrical controls for household and similar use Part 2-7: Particular requirements for timers and time switches Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water valves. 2 3 (SABS IEC 60730-2-9) SANS 60730-2-10:2007/IEC 60730-2-10:2006. IDT. IDT.2 1. Ed. 3 (SABS IEC 60734) SANS 60745-1:2004/IEC 60745-1:2003.01 2.1 SANS 60730-2-9:2008/IEC 60730-2-9:2008. 1. including mechanical requirements Household electrical appliances . 1. Ed. Ed.02 SANS 60745-2-1:2004/IEC 60745-2-1:2003. 2 SANS 60730-2-14:2008/IEC 60730-2-14:2008. 2 1 2 1 1 1. Ed. including mechanical requirements Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oil valves. 2 (SABS IEC 60730-2-11) SANS 60730-2-12:2007/IEC 60730-2-12:2005. 2 SANS 60730-2-13:2007/IEC 60730-2-13:2006.Safety Part 2-1: Particular requirements for drills and impact drills SANS 60730-2-7:2008/IEC 60730-2-7:2008. 3.02 SANS 60730-2-18:2007/IEC 60730-2-18:1997. IDT. 1 1 SANS 60730-2-19:2008/IEC 60730-2-19:2007. 2 SANS 60730-2-11:2007/IEC 60730-2-11:2006. Ed. IDT. Ed. 1. Ed. Ed. IDT. including mechanical requirements Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls Automatic electrical controls for household and similar use Part 2-10: Particular requirements for motor-starting relays Automatic electrical controls for household and similar use Part 2-11: Particular requirements for energy regulators Automatic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door locks Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing controls Automatic electrical controls for household and similar use Part 2-14: Particular requirements for electric actuators Automatic electrical controls for household and similar use Part 2-15: Particular requirements for automatic electrical air flow. Ed. IDT. Ed. IDT. Ed. 2 2 (SABS IEC 60745-2-4) SANS 60745-2-5:2003/IEC 60745-2-5:2003. Ed. 2 2 (SABS IEC 60745-2-8) SANS 60745-2-9:2009/IEC 60745-2-9:2008.Safety Part 2-12: Particular requirements for concrete vibrators Hand-held motor-operated electric tools . IDT. 2. Ed. Ed. Ed. Ed.01 2.1 (SABS IEC 60745-2-2) SANS 60745-2-3:2007/IEC 60745-2-3:2006.Safety Part 2-6: Particular requirements for hammers Safety of hand-held motor-operated electric tools Part 2-7: Particular requirements for spray guns for non-flammable liquids Hand-held motor-operated electric tools . 2 (SABS IEC 60745-2-12) SANS 60745-2-13:2007/IEC 60745-2-13:2006. IDT. IDT.01 1 Page 283 .Safety Part 2-16: Particular requirements for tackers Hand-held motor-operated electric tools . Ed. 2 (SABS IEC 60745-2-17) SANS 60745-2-18:2008/IEC 60745-2-18:2008. IDT.Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Hand-held motor-operated electric tools .Safety Part 2-9: Particular requirements for tappers Hand-held motor-operated electric tools . 2 (SABS IEC 60745-2-14) SANS 60745-2-15:2007/IEC 60745-2-15:2006. IDT. Ed.Safety Part 2-13: Particular requirements for chain saws Hand-held motor-operated electric tools . 3 3 (SABS IEC 60745-2-5) SANS 60745-2-6:2007/IEC 60745-2-6:2006. 2 2 (SABS IEC 60745-2-3) SANS 60745-2-4:2007/IEC 60745-2-4:2006.1 (SABS IEC 60745-2-9) SANS 60745-2-11:2003/IEC 60745-2-11:2003. 1 1 (SABS IEC 60745-2-7) SANS 60745-2-8:2003/IEC 60745-2-8:2003. IDT. Ed.Safety Part 2-19: Particular requirements for jointers SANS 60745-2-2:2008/IEC 60745-2-2:2008. Ed. Ed. Ed. IDT. 2.Safety Part 2-14: Particular requirements for planers Hand-held motor-operated electric tools . 2 (SABS IEC 60745-2-16) SANS 60745-2-17:2003/IEC 60745-2-17:2003.Safety Part 2-2: Particular requirements for screwdrivers and impact wrenches Hand-held motor-operated electric tools .01 2. Ed. IDT. 2 (SABS IEC 60745-2-11) SANS 60745-2-12:2003/IEC 60745-2-12:2003. 2. 2 (SABS IEC 60745-2-15) SANS 60745-2-16:2008/IEC 60745-2-16:2008. IDT. Ed.Safety Part 2-4: Particular requirements for sanders and polishers other than disk type Hand-held motor-operated electric tools .1 (SABS IEC 60745-2-6) SANS 60745-2-7:1989/IEC 60745-2-7:1989. 1 2 2 2 2 2 2 2 1. polishers and disk-type sanders Hand-held motor-operated electric tools . IDT. IDT. IDT.1 SANS 60745-2-19:2006/IEC 60745-2-19:2005. IDT.Safety Part 2-18: Particular requirements for strapping tools Hand-held motor-operated electric tools . IDT. Ed.Safety Part 2-17: Particular requirements for routers and trimmers Hand-held motor-operated electric tools . Ed.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Hand-held motor-operated electric tools . IDT.01 2. 2 (SABS IEC 60745-2-13) SANS 60745-2-14:2003/IEC 60745-2-14:2003.Safety Part 2-15: Particular requirements for hedge trimmers Hand-held motor-operated electric tools .Safety Part 2-8: Particular requirements for shears and nibblers Hand-held motor-operated electric tools . 1.Safety Part 2-5: Particular requirements for circular saws Hand-held motor-operated electric tools . IDT. IDT.Safety Part 2-3: Particular requirements for grinders. Ed. IDT.Length measurement Optical fibres Part 1-30: Measurement methods and test procedures . Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60745-2-20:2009/IEC 60745-2-20:2008. Ed. Ed. 1 (SABS IEC 60793-1-21) SANS 60793-1-22:2001/IEC 60793-1-22:2001. Ed. Ed. IDT. IDT. 2 (SABS IEC 60793-1-42) 1 1 1 1 1 1 1 2 1 2 2 Page 284 . 1 (SABS IEC 60793-1-31) SANS 60793-1-32:2001/IEC 60793-1-32:2001. 3 3 (SABS IEC 60793-1-1) SANS 60793-1-20:2002/IEC 60793-1-20:2001. 1 (SABS IEC 60793-1-40) SANS 60793-1-41:2006/IEC 60793-1-41:2003. IDT. IDT. Ed. 1 (SABS IEC 60793-1-33) SANS 60793-1-34:2006/IEC 60793-1-34:2006.Coating geometry Optical fibres Part 1-22: Measurement methods and test procedures . Ed. IDT.Fibre curl Optical fibres Part 1-40: Measurement methods and test procedures . Ed. 1 SANS 60793-1-21:2001/IEC 60793-1-21:2001.01 Hand-held motor-operated electric tools . Ed. IDT. Ed. IDT. Ed. IDT.Fibre proof test Optical fibres Part 1-31: Measurement methods and test procedures . 1. 2 (SABS IEC 60793-1-41) SANS 60793-1-42:2008/IEC 60793-1-42:2007. Ed.Safety Part 2-21: Particular requirements for drain cleaners Industrial platinum resistance thermometer sensors 1 1 1 Test on gases evolved during combustion of materials from cables Part 1: Determination of the amount of halogen acid gas Test on gases evolved during combustion of materials from cables Part 2: Determination of degree of acidity of gases by measuring pH and conductivity Optical fibres Part 1-1: Measurement methods and test procedures . Ed. IDT. IDT. Ed. 1 (SABS IEC 60793-1-32) SANS 60793-1-33:2001/IEC 60793-1-33:2001. Ed.Attenuation Optical fibres Part 1-41: Measurement methods and test procedures . 1 (SABS IEC 60751) SANS 60754-1:1994/IEC 60754-1:1994.General and guidance Optical fibres Part 1-20: Measurement methods and test procedures . IDT. IDT. 1 (SABS IEC 60754-2) Edition Title 1.Chromatic dispersion 1 SANS 60793-1-1:2008/IEC 60793-1-1:2008. 1 (SABS IEC 60793-1-22) SANS 60793-1-30:2001/IEC 60793-1-30:2001. 2 (SABS IEC 60793-1-34) SANS 60793-1-40:2001/IEC 60793-1-40:2001. IDT. IDT. Ed. 2 (SABS IEC 60754-1) SANS 60754-2:1991/IEC 60754-2:1991.Stress corrosion susceptibility Optical fibres Part 1-34: Measurement methods and test procedures .Tensile strength Optical fibres Part 1-32: Measurement methods and test procedures .Coating strippability Optical fibres Part 1-33: Measurement methods and test procedures . IDT. 1 (SABS IEC 60793-1-30) SANS 60793-1-31:2001/IEC 60793-1-31:2001.Safety Part 2-20: Particular requirements for band saws Hand-held motor-operated electric tools . IDT.1 SANS 60745-2-21:2003/IEC 60745-2-21:2002. 1 SANS 60751:1983/IEC 60751:1983.Fibre geometry Optical fibres Part 1-21: Measurement methods and test procedures .Bandwidth Optical fibres Part 1-42: Measurement methods and test procedures . Ed. Mode field diameter Optical fibres Part 1-46: Measurement methods and test procedures . IDT. Ed. IDT. IDT. Ed. IDT. IDT. IDT.Change of temperature Optical fibres Part 1-53: Measurement methods and test procedures . IDT. IDT.Polarization mode dispersion Optical fibres Part 1-49: Measurement methods and test procedures . Ed. 2 SANS 60793-2-40:2006/IEC 60793-2-40:2006. IDT. IDT. 1 (SABS IEC 60793-1-50) SANS 60793-1-51:2001/IEC 60793-1-51:2001. IDT. 2 SANS 60793-1-50:2001/IEC 60793-1-50:2001. 1 (SABS IEC 60793-1-52) SANS 60793-1-53:2001/IEC 60793-1-53:2001.Differential mode delay Optical fibres Part 1-50: Measurement methods and test procedures . 1 (SABS IEC 60793-1-53) SANS 60793-1-54:2004/IEC 60793-1-54:2003. Ed. 1 (SABS IEC 60793-1-43) SANS 60793-1-44:2001/IEC 60793-1-44:2001.Damp heat (steady state) Optical fibres Part 1-51: Measurement methods and test procedures . 1 SANS 60793-2:2008/IEC 60793-2:2007.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60793-1-43:2001/IEC 60793-1-43:2001. IDT. Ed. IDT. Ed. Ed.Macrobending loss Optical fibres Part 1-48: Measurement methods and test procedures . IDT. Ed. Ed. IDT.Numerical aperture Optical fibres Part 1-44: Measurement methods and test procedures . 3 SANS 60793-2-20:2008/IEC 60793-2-20:2007. 1 (SABS IEC 60793-1-45) SANS 60793-1-46:2001/IEC 60793-1-46:2001.Dry heat Optical fibres Part 1-52: Measurement methods and test procedures . Ed.Cut-off wavelength Optical fibres Part 1-45: Measurement methods and test procedures . 2 SANS 60793-1-49:2006/IEC 60793-1-49:2006.Gamma irradiation Optical fibres Part 2: Product specifications General Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres Optical fibres Part 2-20: Product specifications Sectional specification for category A2 multimode fibres Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres Optical fibres Part 2-40: Product specifications Sectional specification for category A4 multimode fibres 1 1 1 2 2 2 1 1 1 1 1 4 3 2 2 2 Page 285 . Ed. 2 Edition Title 1 Optical fibres Part 1-43: Measurement methods and test procedures . 2 (SABS IEC 60793-1-47) SANS 60793-1-48:2007/IEC 60793-1-48:2007. 6 (SABS IEC 60793-2) SANS 60793-2-10:2008/IEC 60793-2-10:2007. IDT. Ed. Ed.Water immersion Optical fibres Part 1-54: Measurement methods and test procedures . Ed. Ed. 1 (SABS IEC 60793-1-46) SANS 60793-1-47:2007/IEC 60793-1-47:2006. 1 (SABS IEC 60793-1-51) SANS 60793-1-52:2001/IEC 60793-1-52:2001. 1 (SABS IEC 60793-1-44) SANS 60793-1-45:2001/IEC 60793-1-45:2001. Ed.Monitoring of changes in optical transmittance Optical fibres Part 1-47: Measurement methods and test procedures . IDT. Ed. 2 SANS 60793-2-30:2008/IEC 60793-2-30:2007. 1 SANS 60794-2-11:2006/IEC 60794-2-11:2005. Ed. IDT. IDT. Ed. Ed. 2 SANS 60794-2-21:2006/IEC 60794-2-21:2005. Ed. Ed. 3 (SABS IEC 60794-3) SANS 60794-3-10:2009/IEC 60794-3-10:2009. 2 2 (SABS IEC 60794-1-2) SANS 60794-2-10:2006/IEC 60794-2-10:2003. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60793-2-50:2008/IEC 60793-2-50:2008. Ed. Ed. 1 SANS 60794-2-30:2009/IEC 60794-2-30:2008. IDT. Ed. 1 SANS 60794-2-40:2006/IEC 60794-2-40:2003. IDT. IDT. 1 SANS 60794-3-12:2006/IEC 60794-3-12:2005. 3 Edition Title 3 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres Optical fibre cables Part 1-1: Generic specification General Optical fibre cables Part 1-2: Generic specification Basic optical cable test procedures Optical fibre cables Part 2-10: Indoor cables . 1 3 1 1 2 1 2 1 1 1 2 2 1 1 SANS 60794-3-20:2003/IEC 60794-3-20:2002. IDT. IDT. 2 SANS 60794-3-11:2008/IEC 60794-3-11:2007. Ed. IDT.Family specification for simplex and duplex cables Optical fibre cables Part 2-11: Indoor cables Detailed specification for simplex and duplex cables for use in premises cabling Optical fibre cables Part 2-20: Indoor cables . IDT. directly buried and lashed aerial optical telecommunication cables Optical fibre cables Part 3-11: Outdoor cables Detailed specification for duct and directly buried single-mode optical fibre telecommunication cables Optical fibre cables Part 3-12: Outdoor cables Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling Optical fibre cables Part 3-20: Outdoor cables Family specification for optical self-supporting aerial telecommunication cables SANS 60794-1-1:2001/IEC 60794-1-1:2001. IDT. Ed.Sectional specification Optical fibre cables Part 3: Sectional specification Outdoor cables Optical fibre cables Part 3-10: Outdoor cables Family specification for duct. IDT. IDT. 3 (SABS IEC 60794-2) SANS 60794-3:2001/IEC 60794-3:2001. 2 2 (SABS IEC 60794-1-1) SANS 60794-1-2:2003/IEC 60794-1-2:2003. IDT. Ed. Ed. Ed. IDT. 1 1 Page 286 .Family specification for simplex and duplex cables with buffered A4 fibres Optical fibre cables Part 2-50: Indoor cables . 1 SANS 60794-2-20:2009/IEC 60794-2-20:2008. 1 SANS 60794-2:2003/IEC 60794-2:2002.Family specification for multi-fibre optical distribution cables Optical fibre cables Part 2-21: Indoor cables Detailed specification for multi-fibre optical distribution cables for use in premises cabling Optical fibre cables Part 2-30: Indoor cables . Ed. Ed.Family specification for simplex and duplex cables for use in terminated cable assemblies Optical fibre cables Part 2: Indoor cables . IDT. 1 SANS 60794-2-50:2008/IEC 60794-2-50:2008. IDT. IDT.Family specification for ribbon cables Optical fibre cables Part 2-31: Indoor cables Detailed specification for optical fibre ribbon cables for use in premises cabling Optical fibre cables Part 2-40: Indoor cables . 2 SANS 60794-2-31:2006/IEC 60794-2-31:2005. Ed. 1 1 SANS 60794-5:2007/IEC 60794-5:2006.Loss of mass test Thermal stability test Insulating and sheathing materials of electric and optical cables . IDT.Cord sets and interconnection cord sets Common test methods for insulating and sheathing materials of electric cables and optical cables Part 1-1: Methods for general application . IDT.Tests for resistance to cracking Common test methods for insulating and sheathing materials of electric cables Part 3-2: Methods specific to PVC compounds . 1 1 (SABS IEC 60811-1-4) SANS 60811-2-1:2003/IEC 60811-2-1:2001. Ed. IDT. Ed.Methods for determining the density . Ed. 2 1 SANS 60811-1-1:2001/IEC 60811-1-1:2001. IDT. 1 Edition Title 1 Optical fibre cables Part 3-21: Outdoor cables Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines Optical fibre cables Part 5: Sectional specification Microduct cabling for installation by blowing Electrical accessories . Ed.01 2. IDT. hot set and mineral oil immersion tests Common test methods for insulating and sheathing materials of electric cables Part 3: Methods specific to PVC compounds Section 1 .Assessment of carbon black dispersion in polyethylene using a microscope SANS 60794-4:2004/IEC 60794-4:2003.01 2.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60794-3-21:2006/IEC 60794-3-21:2005.Test at low temperature Common test methods for insulating and sheathing materials of electric and optical cables Part 2-1: Methods specific to elastomeric compounds . IDT. IDT. Ed. 2 2 (SABS IEC 60811-4-1) Page 287 .Pressure test at high temperature . 1 1 (SABS IEC 60811-1-2) SANS 60811-1-3:2001/IEC 60811-1-3:2001. Ed. IDT. 2.Tests for determining the mechanical properties Common test methods for insulating and sheathing materials of electric and optical cables Part 1: Methods for general application Section 2: Thermal ageing methods Common test methods for insulating and sheathing materials of electric and optical cables Part 1-3: General application . IDT.1 (SABS IEC 60811-2-1) SANS 60811-3-1:1985/IEC 60811-3-1:1985. 1 1 (SABS IEC 60811-3-2) SANS 60811-4-1:2004/IEC 60811-4-1:2004.Measurement of the melt flow index Carbon black and/or mineral filler content measurement in polyethylene by direct combustion Measurement of carbon black content by thermogravimetric analysis (TGA) . 1 1 SANS 60799:2007/IEC 60799:1998. Ed.01 2.Common test methods Part 4-1: Methods specific to polyethylene and polypropylene compounds .Resistance to environmental stress cracking . IDT.Shrinkage test Common test methods for insulating and sheathing materials of electric and optical cables Part 1-4: Methods for general application . 2.Water absorption tests . Ed. Ed. 1. Ed.1 (SABS IEC 60811-1-3) SANS 60811-1-4:1985/IEC 60811-1-4:1985. Ed. IDT.Ozone resistance. 1 1 (SABS IEC 60811-3-1) SANS 60811-3-2:1985/IEC 60811-3-2:1985.1 (SABS IEC 60811-1-1) SANS 60811-1-2:1985/IEC 60811-1-2:1985.Measurement of thickness and overall dimensions . Ed. IDT. 1 1 SANS 60839-1-3:2007/IEC 60839-1-3:1988. 2 2 (SABS IEC 60811-4-2) SANS 60811-5-1:2004/IEC 60811-5-1:2004. Ed.General Alarm systems Part 2: Requirements for intruder alarm systems Section 7: Passive glass-break detectors for use in buildings Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) .1 (SABS IEC 60811-5-1) SANS 60815-1:2009/IEC/TS 60815-1:2008.Permittivity at 23 °C . systems Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 3: Polymer insulators for a. systems Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working Miscellaneous lampholders Part 1: General requirements and tests Miscellaneous lampholders Part 2-2: Particular requirements .DC resistivity at 23 °C and 100 °C Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 1: Definitions. IDT. 3 1 Page 288 . IDT. Ed. IDT.Lower temperature brittleness Total acid number . test methods and performance criteria Alarm systems Part 1: General requirements Section Three: Environmental testing Alarm systems Part 2: Requirements for intruder alarm systems Section Two: Requirements for detectors . Ed.c. IDT. IDT.Common test methods Part 5-1: Methods specific to filling compounds . Ed. Ed.Test method for copper-catalyzed oxidative degradation Insulating and sheathing materials of electric and optical cables . Ed. 1 1 1 SANS 60838-1:2008/IEC 60838-1:2008.1 1. Ed.Test methods and requirements SANS 60811-4-2:2004/IEC 60811-4-2:2004. IDT. 1 1 SANS 60815-2:2009/IEC/TS 60815-2:2008.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Insulating and sheathing materials of electric and optical cables .Connectors for LED-modules Alarm systems Part 1: General requirements Section One: General Alarm systems Part 1: General requirements Section Two: Power units.01 SANS 60838-2-2:2006/IEC 60838-2-2:2006. 1 1 SANS 60839-2-2:2007/IEC 60839-2-2:1987. IDT.Absence of corrosive components .Tensile strength and elongation at break after conditioning at elevated temperature Wrapping test after conditioning at elevated temperature .Measurement of mass increase .Long-term stability test . Ed. Ed. 1 SANS 60832:2006/IEC 60832:1988. information and general principles Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 2: Ceramic and glass insulators for a. IDT. 4.01 1. 1. IDT. IDT.Wrapping test after thermal ageing in air . 1 1 SANS 60839-1-2:2007/IEC 60839-1-2:1987.Common test methods Part 4-2: Methods specific to polyethylene and polypropylene compounds . Ed. 1 1 SANS 60839-1-1:2007/IEC 60839-1-1:1988. IDT. Ed. 1 1 (SABS IEC 60839-2-7) SANS 60840:2006/IEC 60840:2004. IDT. 1 1 SANS 60839-2-7:1994/IEC 60839-2-7:1994. Ed. IDT. Ed. IDT. Ed.c.Drop-point Separation of oil . 1 1 SANS 60815-3:2009/IEC/TS 60815-3:2008. Ed.01 2. IDT. IDT. 2 2 (SABS IEC 60874-1-1) SANS 60874-14-1:1997/IEC 60874-14-1:1997.02 1 1 SANS 60864-2:1997/IEC 60864-2:1997. 2 (SABS IEC 60851-6) SANS 60864-1:1986/IEC 60864-1:1986.02 1.Calculation of effects Part 2: Examples of calculation Fibre optic attenuators Part 1: Generic specification 1.Test methods Part 5: Electrical properties Winding wires . 1 (SABS IEC 60874-19-2) SANS 60884-1:2006/IEC 60884-1:2006. Ed.01 Page 289 .01 Winding wires .1 (SABS IEC 60851-2) SANS 60851-3:2004/IEC 60851-3:1997.Detail specification Plugs and socket-outlets for household and similar purposes Part 1: General requirements Plugs and socket-outlets for household and similar purposes Part 2-2: Particular requirements for socket-outlets for appliances SANS 60874-1-1:2007/IEC 60874-1-1:2006. Ed. IDT. IDT. 2 (SABS IEC 60851-1) SANS 60851-2:2004/IEC 60851-2:1997. IDT. Ed. Ed. IDT.2 (SABS IEC 60851-5) SANS 60851-6:1996/IEC 60851-6:1996.1 (SABS IEC 60884-1) SANS 60884-2-2:2007/IEC 60884-2-2:2006. 2. Ed. Ed. IDT. 1 (SABS IEC 60864-1) Edition Title 1 Winding wires . IDT. 1 (SABS IEC 60864-2) 1 SANS 60865-1:2006/IEC 60865-1:1993. Ed. 2 2 (SABS IEC 60884-2-2) 1 1 1 2. 2. IDT. 3 (SABS IEC 60869-1) SANS 60874-1:2007/IEC 60874-1:2006. Ed.Test methods Part 1: General 1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60851-1:1996/IEC 60851-1:1996. 2 1 SANS 60865-2:2008/IEC/TR 60865-2:1994. Ed. IDT.Calculation of effects Part 1: Definitions and calculation methods Short-circuit currents . A1b Connectors for optical fibres and cables Part 14-2: Detail specification for fibre optic connector type SCPC tuned terminated to single-mode fibre type B1 Connectors for optical fibres and cables Part 19-2: Fibre optic adaptor (duplex) type SC for single-mode fibre connectors . Ed. Ed. IDT. IDT. 1 (SABS IEC 60874-14-2) SANS 60874-19-2:1999/IEC 60874-19-2:1999. IDT. IDT.Test methods Part 3: Mechanical properties Winding wires .Test methods Part 4: Chemical properties Winding wires . IDT. Ed. 1 SANS 60869-1:1999/IEC 60869-1:1999. IDT. Ed. Ed. IDT (SABS IEC 60851-4) SANS 60851-5:2004/IEC 60851-5:2004. 3. 1 (SABS IEC 60874-14-1) SANS 60874-14-2:1997/IEC 60874-14-2:1997. 3.Test methods Part 2: Determination of dimensions Winding wires .Test methods Part 6: Thermal properties Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment Part 1: Interface standards for systems using dedicated interconnections Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment Part 2: Interface standards for systems using data bus type interconnections Short-circuit currents . Ed. 5 (SABS IEC 60874-1) 1 1 3 Connectors for optical fibres and cables Part 1: Generic specification Connectors for optical fibres and cables Part 1-1: Blank detail specification Connectors for optical fibres and cables Part 14-1: Detail specification for fibre optic connector type SCPC standard terminated to multimode fibre type A1a. IDT.1 (SABS IEC 60851-3) SANS 60851-4:2006/IEC 60851-4:2005. Ed. 04 2 1 IEC system of plugs and socket-outlets for household and similar purposes Part 3: SELV plugs and socket-outlets. Ed. Ed. Ed.Gloves of insulating material SANS 60884-2-3:2007/IEC 60884-2-3:2006. Ed. Single-capped fluorescent lamps .Performance requirements AC-supplied electronic ballasts for tubular fluorescent lamps . 2 1 SANS 60901:2008/IEC 60901:2008. Ed. IDT. 24 V. Ed. 1. IDT.c Ballasts for tubular fluorescent lamps .General requirements and methods of test Stationary lead-acid batteries Part 21: Valve regulated types . IDT.01 1.Starting devices (other than glow starters) .1 (SABS IEC 60923) SANS 60925:2001/IEC 60925:2001.1 (SABS IEC 60921) SANS 60923:2007/IEC 60923:2006. 3. 3 (SABS IEC 60929) SANS 60934:2007/IEC 60934:2007. Ed. Ed. 2 (SABS IEC 60939-1) 2. Ed. 2 (SABS IEC 60903) SANS 60906-3:1994/IEC 60906-3:1994. IDT. IDT. Ed. 1 1 SANS 60896-22:2004/IEC 60896-22:2004. 12 V. IDT.Methods of test Stationary lead-acid batteries Part 22: Valve regulated types . IDT.Performance requirements DC supplied electronic ballasts for tubular fluorescent lamps . 1 1 SANS 60896-21:2004/IEC 60896-21:2004. 2 2 (SABS IEC 60884-2-3) SANS 60884-2-4:2008/IEC 60884-2-4:2007.Requirements Live working . IDT. and 1 500 V d. a.c. IDT.c and d.2 (SABS IEC 60925) SANS 60927:2007/IEC 60927:2007. Ed. 3 3 (SABS IEC 60884-2-4) SANS 60884-2-5:1995/IEC 60884-2-5:1995.Performance requirements Auxiliaries for lamps .Performance specifications Live working .Ballasts for discharge lamps (excluding tubular fluorescent lamps) .Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Plugs and socket-outlets for household and similar purposes Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirements for plugs and socket-outlets for SELV Plugs and socket-outlets for household and similar purposes Part 2-5: Particular requirements for adaptors Plugs and socket-outlets for household and similar purposes Part 2: Particular requirements for switched socket-outlets with interlock for fixed electrical installations A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear Stationary lead-acid batteries Part 11: Vented types . IDT. IDT.Hand tools for use up to 1 000 V a.Performance requirements Circuit-breakers for equipment (CBE) SANS 60921:2006/IEC 60921:2006. 48 V. 2.4 (SABS IEC 60901) SANS 60903:2005/IEC 60903:2002. 1 (SABS IEC 60906-3) 2. Ed.c. 2. IDT. Ed. IDT. 1 1 SANS 60900:2006/IEC 60900:2004. 16 A 6 V.Performance requirements Auxiliaries for lamps . 3 (SABS IEC 60927) SANS 60929:2006/IEC 60929:2006. IDT. Ed. Ed. 1 1 SANS 60896-11:2003/IEC 60896-11:2002. IDT. Ed. 1 1 (SABS IEC 60884-2-5) SANS 60884-2-6:1997/IEC 60884-2-6:1997.1 (SABS IEC 60934) SANS 60939-1:2007/IEC 60939-1:2005.01 2 Passive filter units for electromagnetic interference suppression Part 1: Generic specification Page 290 . IDT. IDT.01 3. IDT. Ed. 3.02 3 3 2. IDT. Ed. 1 1 (SABS IEC 60884-2-6) SANS 60890:2007/IEC 60890:1987. Ed. Ed. IDT. Ed.1 (SABS IEC 60947-5-5) SANS 60947-5-6:1999/IEC 60947-5-6:1999.Sound calibrators 5 Low-voltage switchgear and controlgear Part 1: General rules Low-voltage switchgear and controlgear Part 2: Circuit-breakers Low-voltage switchgear and controlgear Part 3: Switches.02 2. 2 2 (SABS IEC 60947-6-1) Page 291 . Ed. 4 Edition Title 2 Electroacoustics . 3 (SABS IEC 60942) SANS 60947-1:2008/IEC 60947-1:2007. 1. 5 (SABS IEC 60947-1) SANS 60947-2:2007/IEC 60947-2:2006. IDT. semiconductor controllers and contactors for non-motor loads Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements Proximity switches Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements Requirements for proximity devices with defined behaviour under fault conditions (PDF) Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements Method of assessing the performance of low-energy contacts .2 (SABS IEC 60947-4-2) SANS 60947-4-3:2007/IEC 60947-4-3:2007. 1 1 SANS 60947-5-8:2007/IEC 60947-5-8:2006. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 60942:2003/IEC 60942:2003. IDT. Ed. IDT.01 1.Special tests Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function Low-voltage switchgear and controlgear Part 5-6: Control circuit devices and switching elements . 1 1 (SABS IEC 60947-5-6) SANS 60947-5-7:2003/IEC 60947-5-7:2003. IDT. Ed. 2.Transfer switching equipment 4 SANS 60947-3:2009/IEC 60947-3:2008. Ed. IDT. Ed.01 1.DC interface for proximity sensors and switching amplifiers (NAMUR) Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements Three position enabling switches Low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements Flow rate switches Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment . Ed. 3 3 (SABS IEC 60947-5-1) SANS 60947-5-2:2008/IEC 60947-5-2:2007. Ed.Electromechanical contactors and motor-starters Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters .A. 2. disconnectors. IDT.01 2. 1 1 SANS 60947-6-1:2006/IEC 60947-6-1:2005.1 (SABS IEC 60947-5-3) SANS 60947-5-4:2003/IEC 60947-5-4:2002. Ed. IDT. Ed.1 (SABS IEC 60947-4-1) SANS 60947-4-2:2007/IEC 60947-4-2:2007. IDT. 1. 1. 1 1 SANS 60947-5-9:2007/IEC 60947-5-9:2006. IDT.AC semiconductor motor controllers and starters Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters . IDT. Ed. IDT.1 (SABS IEC 60947-4-3) SANS 60947-5-1:2005/IEC 60947-5-1:2003. IDT. Ed. Ed. 3 3 (SABS IEC 60947-5-2) SANS 60947-5-3:2005/IEC 60947-5-3:2005. IDT.01 1. IDT. IDT.C. 3 (SABS IEC 60947-3) 3 SANS 60947-4-1:2004/IEC 60947-4-1:2002. IDT. 2 2 (SABS IEC 60947-5-4) SANS 60947-5-5:2005/IEC 60947-5-5:2005. switch-disconnectors and fuse-combination units Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters . Ed. Ed. IDT. Ed. IDT. 1.2 1. 2 (SABS IEC 60974-7) 2 SANS 60974-11:2005/IEC 60974-11:2004. IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment . 2 2 (SABS IEC 60974-11) SANS 60974-12:2007/IEC 60974-12:2005. 2 2 (SABS IEC 60974-12) SANS 60998-1:2006/IEC 60998-1:2002. 1.01 1 SANS 60974-3:2009/IEC 60974-3:2007. Ed. 2 1 SANS 60974-5:2009/IEC 60974-5:2007.Safety requirements for fuse terminal blocks Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines Information technology equipment . 2 1 Arc welding equipment Part 11: Electrode holders Arc welding equipment Part 12: Coupling devices for welding cables Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements Connecting devices for low-voltage circuits for household and similar purposes Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units Connecting devices for low-voltage circuits for household and similar purposes Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units SANS 60998-2-1:2006/IEC 60998-2-1:2002. 1 1 SANS 60968:2006/IEC 60968:1999. IDT.Control and protective switching devices (or equipment) (CPS) Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment . Ed. IDT. IDT. 2 1 SANS 60974-6:2009/IEC 60974-6:2003. Ed. 2. IDT. 2. 3 3 (SABS IEC 60947-7-1) SANS 60947-7-2:2009/IEC 60947-7-2:2009. 1 2 Page 292 .1 (SABS IEC 60974-1) SANS 60974-2:2009/IEC 60974-2:2007. Ed. Ed.1 (SABS IEC 60947-6-2) SANS 60947-7-1:2009/IEC 60947-7-1:2009. IDT. Ed. Ed. IDT. IDT.Safety Part 1: General requirements Self-ballasted lamps for general lighting services Safety requirements Arc welding equipment Part 1: Welding power sources Arc welding equipment Part 2: Liquid cooling systems Arc welding equipment Part 3: Arc striking and stabilizing devices Arc welding equipment Part 5: Wire feeders SANS 60947-6-2:2007/IEC 60947-6-2:2007. 1 1 Arc welding equipment Part 6: Limited duty manual metal arc welding power sources Arc welding equipment Part 7: Torches SANS 60974-7:2006/IEC 60974-7:2005. Ed. Ed. 2 1.Terminal blocks for copper conductors Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment . IDT.Protective conductor terminal blocks for copper conductors Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment . Ed.01 SANS 60950-1:2003/IEC 60950-1:2001. Ed.02 SANS 60974-1:2003/IEC 60974-1:2000. Ed. IDT. Ed. Ed. Ed. Ed. Ed.1 1. IDT. 3 3 (SABS IEC 60947-7-2) SANS 60947-7-3:2009/IEC 60947-7-3:2009. 1 2 SANS 60998-2-2:2006/IEC 60998-2-2:2002. IDT. IDT. 2 2 SANS 60947-8:2007/IEC 60947-8:2006. IDT. IDT. IDT.01 2. IDT. Ed. IDT. Ed. IDT. Ed. 1 1 (SABS IEC 61000-2-5) SANS 61000-2-6:1995/IEC 61000-2-6:1995. 1 1 Page 293 . Ed.Radiated disturbance .Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Connecting devices for low-voltage circuits for household and similar purposes Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units Connecting devices for low-voltage circuits for household and similar purposes Part 2-4: Particular requirements for twist-on connecting devices Electromagnetic compatibility (EMC) Part 1: General Section 1: Application and interpretation of fundamental definitions and terms Electromagnetic compatibility (EMC) Part 1-2: General . Ed. IDT. IDT.Basic EMC publication Electromagnetic compatibility (EMC) Part 2-10: Environment . 1 1 (SABS IEC 61000-2-6) SANS 61000-2-7:1998/IEC 61000-2-7:1998. Ed. Ed. 1 1 SANS 61000-2-2:2002/IEC 61000-2-2:2002. 1 1 SANS 61000-2-1:2006/IEC 61000-2-1:1990. IDT. Ed. Ed.Description of HEMP environment Conducted disturbance SANS 60998-2-3:2006/IEC 60998-2-3:2002. 1 2 SANS 61000-2-5:1995/IEC 61000-2-5:1995. IDT. 2 2 SANS 61000-1-3:2006/IEC/TR 61000-1-3:2002.Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena Electromagnetic compatibility (EMC) Part 1-3: General .Compatibility levels for low-frequency conducted disturbances and signalling in public lowvoltage power supply systems Electromagnetic compatibility (EMC) Part 2: Environment Section 3: Description of the environment . IDT.Radiated and non-network-frequencyrelated conducted phenomena Electromagnetic compatibility (EMC) Part 2-4: Environment .Compatibility levels in industrial plants for low-frequency conducted disturbances Electromagnetic compatibility (EMC) Part 2: Environment Section 5: Classification of electromagnetic environments .Electromagnetic environment for lowfrequency conducted disturbances and signalling in public power supply systems Electromagnetic compatibility (EMC) Part 2-2: Environment . Ed. IDT. IDT. 1 1 SANS 61000-2-4:2003/IEC 61000-2-4:2002. IDT. 1 2 SANS 61000-1-1:1992/IEC 61000-1-1:1992. 2 2 (SABS IEC 61000-2-2) SANS 61000-2-3:2007/IEC 61000-2-3:1992. IDT.The effects of high-altitude EMP (HEMP) on civil equipment and systems Electromagnetic compatibility (EMC) Part 1-5: General .Basic EMC publication Electromagnetic compatibility (EMC) Part 2: Environment Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances Electromagnetic compatibility (EMC) Part 2: Environment Section 7: Low frequency magnetic fields in various environments Electromagnetic compatibility (EMC) Part 2: Environment Section 9: Description of HEMP environment . 1 1 (SABS IEC 61000-1-1) SANS 61000-1-2:2009/IEC TS 61000-1-2:2008. Ed. Ed. 1 2 SANS 60998-2-4:2006/IEC 60998-2-4:2004. 1 1 SANS 61000-2-10:2007/IEC 61000-2-10:1998. Ed. IDT. 1 1 (SABS IEC 61000-2-7) SANS 61000-2-9:2007/IEC 61000-2-9:1996. Ed. IDT. IDT. Ed.High power electromagnetic (HPEM) effects on civil systems Electromagnetic compatibility (EMC) Part 2: Environment Section 1: Description of the environment . 1 1 SANS 61000-1-5:2006/IEC 61000-1-5:2004. Ed. Ed. Ed.General guide on harmonics and interharmonics measurements and instrumentation. radio-frequency. 3 3 (SABS IEC 61000-4-1) SANS 61000-4-2:2009/IEC 61000-4-2:2008. Ed. 1 1 SANS 61000-4-1:2007/IEC 61000-4-1:2006. induced by radio-frequency fields Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques . 2 2 SANS 61000-3-11:2003/IEC 61000-3-11:2000. IDT. Ed. 3.High-power electromagnetic (HPEM) environments .Limitation of voltage changes. 1 SANS 61000-2-12:2005/IEC 61000-2-12:2003. Ed.Electrical fast transient/burst immunity test Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques . 2 2 (SABS IEC 61000-3-3) SANS 61000-3-4:1998/IEC 61000-3-4:1998. IDT. IDT. IDT. voltage fluctuations and flicker in public low-voltage supply systems . 2 2 (SABS IEC 61000-4-5) SANS 61000-4-6:2009/IEC 61000-4-6:2008.Classification of HEMP environments Electromagnetic compatibility (EMC) Part 2-12: Environment .1 (SABS IEC 61000-4-3) SANS 61000-4-4:2004/IEC 61000-4-4:2004.01 3.Surge immunity test Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques .Limitation of emission of harmonic currents in lowvoltage power supply systems for equipment with rated current greater than 16 A Electromagnetic compatibility (EMC) Part 3-5: Limits . IDT. Ed. Ed. Ed. electromagnetic field immunity test Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques . IDT. Ed. Ed.Limitation of voltage fluctuations and flicker in lowvoltage power supply systems for equipment with rated current greater than 75 A Electromagnetic compatibility (EMC) Part 3-11: Limits . 2 2 (SABS IEC 61000-4-4) SANS 61000-4-5:2006/IEC 61000-4-5:2005.Limitation of voltage changes. IDT. for power supply systems and equipment connected thereto 1 SANS 61000-2-13:2007/IEC 61000-2-13:2005. IDT. Ed. 2 2 (SABS IEC 61000-4-7) Page 294 .Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems Electromagnetic compatibility (EMC) Part 2-13: Environment . 3. IDT.Overview of IEC 61000-4 series Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques .02 3.Limits for harmonic current emissions (equipment input current <= 16 A per phase) Electromagnetic compatibility (EMC) Part 3-3: Limits .Radiated and conducted Electromagnetic compatibility (EMC) Part 3-2: Limits . IDT. 1 1 SANS 61000-3-2:2009/IEC 61000-3-2:2009. IDT.2 (SABS IEC 61000-3-2) SANS 61000-3-3:2009/IEC 61000-3-3:2008.Equipment with rated current <= 75 A and subject to conditional connection Electromagnetic compatibility (EMC) Part 4-1: Testing and measurement techniques . 2 2 (SABS IEC 61000-4-2) SANS 61000-4-3:2008/IEC 61000-4-3:2008. IDT. Ed. IDT. IDT. IDT. for equipment with rated current <= 16 A per phase and not subject to conditional connection Electromagnetic compatibility (EMC) Part 3-4: Limits .Electrostatic discharge immunity test Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques . 1 Edition Title 1 Electromagnetic compatibility (EMC) Part 2-11: Environment . voltage fluctuations and flicker in public low-voltage supply systems.Radiated.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61000-2-11:2006/IEC 61000-2-11:1999. 1 1 (SABS IEC 61000-3-4) SANS 61000-3-5:2009/IEC/TS 61000-3-5:2009. Ed. 3 3 (SABS IEC 61000-4-6) SANS 61000-4-7:2003/IEC 61000-4-7:2002.Immunity to conducted disturbances. Ed. IDT.1 1 1.1 1.Damped oscillatory magnetic field immunity test Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques .Voltage dips.Test for immunity to conducted. 1. Ed.Basic EMC publication Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques .Pulse magnetic field immunity test Electromagnetic compatibility (EMC) Part 4-10: Testing and measurement techniques .1 1.Unbalance.01 1 SANS 61000-4-12:2007/IEC 61000-4-12:2006. IDT.2 1. IDT. IDT.02 SANS 61000-4-29:2005/IEC 61000-4-29:2000.1 SANS 61000-4-9:2003/IEC 61000-4-9:2001. 1 1. 2 (SABS IEC 61000-4-12) SANS 61000-4-13:2009/IEC 61000-4-13:2009.02 SANS 61000-4-16:2005/IEC 61000-4-16:2002.1 SANS 61000-4-10:2003/IEC 61000-4-10:2001.1 2 1.1 SANS 61000-4-11:2005/IEC 61000-4-11:2004. IDT. 1. Ed.Variation of power frequency. 1.02 1.Ripple on d.Ring wave immunity test Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques .01 SANS 61000-4-24:2006/IEC 61000-4-24:1997. 1 SANS 61000-4-27:2009/IEC 61000-4-27:2009. IDT. Ed. IDT.Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques . IDT. common mode disturbances in the frequency range 0 Hz to 150 kHz Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques . Ed.Power frequency magnetic field immunity test Electromagnetic compatibility (EMC) Part 4-9: Testing and measurement techniques . immunity test for equipment with input current not exceeding 16 A per phase Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques .c. input power port immunity test Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques . Ed.Harmonics and interharmonics including mains signalling at a.2 1. 1. Ed. Ed. 1.01 1. short interruptions and voltage variations on d.Voltage dips.01 SANS 61000-4-28:2009/IEC 61000-4-28:2009.c. immunity test for equipment with input current not exceeding 16 A per phase Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques . Ed. 1. 1. Ed. Ed. IDT.Emission and immunity testing in transverse electromagnetic (TEM) waveguides Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 24: Test methods for protective devices for HEMP conducted disturbance .c. IDT. IDT.01 1. Ed. low frequency immunity tests Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques .2 (SABS IEC 61000-4-17) SANS 61000-4-20:2007/IEC 61000-4-20:2007. short interruptions and voltage variations immunity tests Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques . input power port immunity tests SANS 61000-4-8:2003/IEC 61000-4-8:2001. power port. IDT. IDT. Ed.01 SANS 61000-4-14:2009/IEC 61000-4-14:2009.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques . IDT. 1. IDT.01 SANS 61000-4-17:2009/IEC 61000-4-17:2009. 1 1 Page 295 . Ed. 1. Ed. 1. 1 1 SANS 61000-4-25:2006/IEC 61000-4-25:2001.HEMP immunity test methods for equipment and systems Electromagnetic compatibility (EMC) Part 4-27: Testing and measurement techniques . Ed. IDT.Power quality measurement methods Electromagnetic compatibility (EMC) Part 5: Installation and mitigation guidelines Section 1: General considerations . 1 1 (SABS IEC 61000-5-2) SANS 61000-5-3:2008/IEC TR 61000-5-3:1999. Ed. 2 2 SANS 61000-6-6:2006/IEC 61000-6-6:2003. Ed. IDT. IDT. 1 SANS 61000-5-4:2008/IEC/TR 61000-5-4:1996. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61000-4-30:2009/IEC 61000-4-30:2008. 1 1 SANS 61000-5-2:1997/IEC 61000-5-2:1997. Ed. Ed. IDT. 1 1 SANS 61000-6-5:2009/IEC TS 61000-6-5:2001.Immunity for residential. Ed. Ed.2 (SABS IEC 61008-1) SANS 61010-031:2003/IEC 61010-031:2002. 2 Edition Title 2 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques . IDT. Ed. 1 1 1 SANS 61000-5-5:2008/IEC 61000-5-5:1996. IDT. IDT. control and laboratory use Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test Safety requirements for electrical equipment for measurement. Ed.02 1 SANS 61010-1:2004/IEC 61010-1:2001.Emission standard for industrial environments Electromagnetic compatibility (EMC) Part 6-6: Generic standards . and laboratory use Part 1: General requirements Safety requirements for electrical equipment for measurement. IDT. Ed.Basic EMC publication Electromagnetic compatibility (EMC) Part 5: Installation and mitigation guidelines Section 5: Specification of protective devices for HEMP conducted disturbance . IDT. IDT. Ed. Ed. commercial and light-industrial environments Electromagnetic compatibility (EMC) Part 6-2: Generic standards . IDT. 1 1 SANS 61000-6-1:2005/IEC 61000-6-1:2005. 2 (SABS IEC 61010-1) SANS 61010-2-010:2007/IEC 61010-2-010:2005. 1 2. control. IDT.Specifications for protective devices against HEMP radiated disturbance .HEMP protection concepts Electromagnetic compatibility (EMC) Part 5: Installation and mitigation guidelines Section 4: Immunity to HEMP . 1 1 SANS 61008-1:2006/IEC 61008-1:2006. Ed. 1 2 SANS 61000-6-3:2007/IEC 61000-6-3:2006. Ed. IDT. control and laboratory use Part 2010: Particular requirements for laboratory equipment for the heating of materials SANS 61000-5-1:2006/IEC 61000-5-1:1996.Basic EMC publication Electromagnetic compatibility (EMC) Part 5: Installation and mitigation guidelines Section 2: Earthing and cabling Electromagnetic compatibility (EMC) Part 5-3: Installation and mitigation guidelines . 2.Emission standard for residential. 2 2 (SABS CISPR/IEC 61000-6-3) SANS 61000-6-4:2006/IEC 61000-6-4:2006. IDT. 2 (SABS IEC 61010-2-010) 2 2 Page 296 .HEMP immunity for indoor equipment Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) Part 1: General rules Safety requirements for electrical equipment for measurement.Immunity for industrial environments Electromagnetic compatibility (EMC) Part 6-3: Generic standards .Basic EMC publication Electromagnetic compatibility (EMC) Part 6-5: Generic standards . 2 2 (SABS IEC 61000-6-1) SANS 61000-6-2:2005/IEC 61000-6-2:2005. Ed. commercial and light-industrial environments Electromagnetic compatibility (EMC) Part 6-4: Generic standards . IDT.Immunity for power station and substation environments Electromagnetic compatibility (EMC) Part 6-1: Generic standards . Ed. control and laboratory use Part 2020: Particular requirements for laboratory centrifuges Safety requirements for electrical equipment for measurement. IDT. and laboratory use Part 2031: Particular requirements for hand-held probe assemblies for electrical measurement and test Safety requirements for electrical equipment for measurement. 1 1 (SABS IEC 61029-2-2) SANS 61029-2-3:1993/IEC 61029-2-3:1993. IDT. Ed. 2 1 SANS 61010-2-081:2005/IEC 61010-2-081:2001. IDT. IDT. Ed. Ed. 1 (SABS IEC 61029-2-10) 1 Page 297 . Ed. IDT. 1 1 (SABS IEC 61029-2-7) SANS 61029-2-8:1995/IEC 61029-2-8:1995. Ed. control and laboratory use Part 2081: Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes Safety requirements for electrical equipment for measurement. Ed. 1 1 (SABS IEC 61029-2-4) SANS 61029-2-5:1993/IEC 61029-2-5:1993. IDT. Ed. Ed. and laboratory use Part 2032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement Safety requirements for electrical equipment for measurement. Ed. 1 1 SANS 61010-2-101:2003/IEC 61010-2-101:2002. IDT. IDT. IDT. IDT. IDT. Ed. 1 1 (SABS IEC 61029-2-8) SANS 61029-2-9:1995/IEC 61029-2-9:1995. 2 (SABS IEC 61010-2-020) Edition Title 2 Safety requirements for electrical equipment for measurement. 1 1 (SABS IEC 61029-2-1) SANS 61029-2-2:1993/IEC 61029-2-2:1993. IDT 1 (SABS IEC 61010-2-031) SANS 61010-2-032:2003/IEC 61010-2-032:2002. control. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61010-2-020:2007/IEC 61010-2-020:2006. control and laboratory use Part 2101: Particular requirements for in vitro diagnostic (IVD) medical equipment Safety of transportable motor-operated electric tools Part 1: General requirements Safety of transportable motor-operated electric tools Part 2-1: Particular requirements for circular saws Safety of transportable motor-operated electric tools Part 2-2: Particular requirements for radial arm saws Safety of transportable motor-operated electric tools Part 2-3: Particular requirements for planers and thicknessers Safety of transportable motor-operated electric tools Part 2-4: Particular requirements for bench grinders Safety of transportable motor-operated electric tools Part 2-5: Particular requirements for band saws Safety of transportable motor-operated electric tools Part 2-6: Particular requirements for diamond drills with water supply Safety of transportable motor-operated electric tools Part 2-7: Particular requirements for diamond saws with water supply Safety of transportable motor-operated electric tools Part 2-8: Particular requirements for single spindle vertical moulders Safety of transportable motor-operated electric tools Part 2: Particular requirements for mitre saws Safety of transportable motor-operated electric tools Part 2-10: Particular requirements for cutting-off grinders SANS 61010-2-031:1993/IEC 61010-2-031:1993. 1 1 (SABS IEC 61029-2-5) SANS 61029-2-6:1993/IEC 61029-2-6:1993. Ed. 1 1 (SABS IEC 61029-2-3) SANS 61029-2-4:1993/IEC 61029-2-4:1993. IDT. Ed. 1 (SABS IEC 61029-1) 1 SANS 61029-2-1:1993/IEC 61029-2-1:1993. IDT. IDT. 1 1 SANS 61029-1:1990/IEC 61029-1:1990. control. 1 1 (SABS IEC 61029-2-9) SANS 61029-2-10:1998/IEC 61029-2-10:1998. Ed. 1 1 (SABS IEC 61029-2-6) SANS 61029-2-7:1993/IEC 61029-2-7:1993. IDT. Ed. 2 1 2 2 DC or AC supplied electronic step-down convertors for filament lamps .Capacitors for use in tubular fluorescent and other discharge lamp circuits General and safety requirements Capacitors for use in tubular fluorescent and other discharge lamp circuits . 1 (SABS IEC 61049) SANS 61056-1:2003/IEC 61056-1:2002. Ed. 1 1 (SABS IEC 61058-2-1) Page 298 . IDT.02 SANS 61058-2-1:1992/IEC 61058-2-1:1992. 1 1 SANS 61057:2009/IEC 61057:1991.Performance requirements General purpose lead-acid batteries (valve-regulated types) Part 1: General requirements. IDT. Ed. Ed. 1 1 SANS 61058-1:2009/IEC 61058-1:2008. Ed. IDT. Ed. 3 (SABS IEC 61034-2) SANS 61035-1:1990/IEC 61035-1:1990. IDT. 2 1 SANS 61056-3:2003/IEC 61056-3:1991. Ed. Ed. 2 (SABS IEC 61044) SANS 61047:2005/IEC 61047:2004. IDT. functional characteristics . Ed. 1 1 (SABS IEC 61035-2-2) SANS 61035-2-3:1993/IEC 61035-2-3:1993. 1 1 (SABS IEC 61035-2-4) SANS 61044:2004/IEC TR 61044:2002. IDT. Ed. Ed. Ed. IDT. IDT. 1 1 (SABS IEC 61035-2-1) SANS 61035-2-2:1993/IEC 61035-2-2:1993. 2 (SABS IEC 61047) SANS 61048:2006/IEC 61048:2006. IDT. 2 (SABS IEC 61048) SANS 61049:1991/IEC 61049:1991.Performance requirements Auxiliaries for lamps . IDT. 1 (SABS IEC 61035-1) Edition Title 1 Safety of transportable motor-operated electric tools Part 2-11: Particular requirements for mitre-bench saws Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements Specification for conduit fittings for electrical installations Part 1: General requirements Specification for conduit fittings for electrical installations Part 2: Particular specifications Section 1: Metal conduit fittings Specification for conduit fittings for electrical installations Part 2: Particular specifications Section 2: Conduit fittings of insulating material Specification for conduit fittings for electrical installations Part 2: Particular specifications Section 3: Fittings for flexible conduits of metal. 1 1 (SABS IEC 61035-2-3) SANS 61035-2-4:1995/IEC 61035-2-4:1995. IDT. Ed. Ed. Ed. 3. 3 (SABS IEC 61034-1) SANS 61034-2:2006/IEC 61034-2:2005. IDT. IDT. IDT.Methods of test General purpose lead-acid batteries (valve-regulated types) Part 2: Dimensions. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61029-2-11:2004/IEC 61029-2-11:2001. IDT. IDT. IDT. insulating or composite materials and for pliable conduits of metal or composite materials Specification for conduit fittings for electrical installations Part 2: Particular specifications Section 4: Conduit fittings of aluminium alloy Opportunity charging of lead-acid traction batteries 3 3 1 SANS 61035-2-1:1993/IEC 61035-2-1:1993. terminals and marking Portable lead-acid cells and batteries (valveregulated types) Part 3: Safety recommendations for use in electric appliances Aerial devices with insulating boom used for live working Switches for appliances Part 1: General requirements Switches for appliances Part 2-1: Particular requirements for cord switches 2 1 SANS 61056-2:2003/IEC 61056-2:2002. 1 SANS 61034-1:2006/IEC 61034-1:2005. IDT. Ed.2 (SABS IEC 61058-1) 3. Ed. Ed. Ed.1 (SABS IEC 61058-2-4) SANS 61058-2-5:1994/IEC 61058-2-5:1994. Ed. 2 2 Page 299 . IDT. Ed. IDT. IDT. IDT. Ed. 1 1 (SABS IEC 61058-2-5) SANS 61073-1:2009/IEC 61073-1:2009.Composite suspension and tension insulators for a. 1 (SABS IEC 61089) SANS 61094-1:2009/IEC 61094-1:2000. Ed. 1 1 (SABS IEC 61084-2-1) SANS 61084-2-2:2003/IEC 61084-2-2:2003. Ed. IDT. IDT. Ed. IDT. systems with a nominal voltage greater than 1 000 V Definitions.c. IDT. 4 (SABS IEC 61073-1) 2 SANS 61084-1:1991/IEC 61084-1:1991. Ed. 1 1 SANS 61148:2005/IEC 61148:1992. IDT. Ed.Sectional specification SANS 61058-2-4:2004/IEC 61058-2-4:2003. 1 1 SANS 61094-6:2009/IEC 61094-6:2004. Ed. IDT. IDT. 1 1 SANS 61084-2-4:1996/IEC 61084-2-4:1996. Ed. 2 1 1 SANS 61094-2:2009/IEC 61094-2:2009. IDT. IDT. 1. 2 1 SANS 61094-5:2009/IEC 61094-5:2001. 1 (SABS IEC 61084-1) 1 SANS 61084-2-1:1996/IEC 61084-2-1:1996. Ed. 1 1 (SABS IEC 61084-2-4) SANS 61089:1991/IEC 61089:1991. Ed.01 1. IDT. 3 2 SANS 61156-2:2007/IEC 61156-2:2003. Ed. Ed. 1 1 SANS 61109:2008/IEC 61109:2008. Ed. 1 1 SANS 61156-1:2007/IEC 61156-1:2007.Measurement microphones Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison Measurement microphones Part 6: Electrostatic actuators for determination of frequency response Insulators for overhead lines .Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic specification Cable trunking and ducting systems for electrical installations Part 1: General requirements Cable trunking and ducting systems for electrical installations Part 2: Particular requirements Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings Cable trunking and ducting systems for electrical installations Part 2-2: Particular requirements Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations Cable trunking and ducting systems for electrical installations Part 2: Particular requirements Section 4: Service poles Round wire concentric lay overhead electrical stranded conductors Measurement microphones Part 1: Specifications for laboratory standard microphones Electroacoustics . 2 (SABS IEC 61109) 2 SANS 61117:2006/IEC 61117:1992. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Switches for appliances Part 2-4: Particular requirements for independently mounted switches Switches for appliances Part 2-5: Particular requirements for change-over selectors Fibre optic interconnecting devices and passive components . test methods and acceptance criteria A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) Terminal markings for valve device stacks and assemblies and for power convertor equipment Multicore and symmetrical pair/quad cables for digital communications Part 1: General specification Multicore and symmetrical pair/quad cables for digital communications Part 2: Horizontal floor wiring . IDT. Ed. 1 1 Page 300 . Ed. Ed. IDT. Ed. IDT. Ed. d. Ed.Portable equipment for earthing or earthing and short-circuiting Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) Part 1: Test methods and requirements Electrical apparatus for use in the presence of combustible dust Part 0: General requirements Electrical apparatus for use in the presence of combustible dust Part 1: Protection by enclosures "tD" Electrical apparatus for use in the presence of combustible dust Part 2: Test methods Section 1: Methods for determining the minimum ignition temperatures of dust Electrical apparatus for use in the presence of combustible dust Part 2: Test methods Section 2: Method for determining the electrical resistivity of dust in layers Electrical apparatus for use in the presence of combustible dust Part 2: Test methods Section 3: Method for determining minimum ignition energy of dust/air mixtures Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection "pD" Electrical apparatus for use in the presence of combustible dust Part 10: Classification of areas where combustible dusts are or may be present Electrical apparatus for use in the presence of combustible dust Part 11: Protection by intrinsic safety "iD" 2 1. Ed. 1 1 (SABS IEC 61241-2-3) SANS 61241-4:2001/IEC 61241-4:2001.c. Ed. Ed. 3 (SABS IEC 61184) SANS 61195:1999/IEC 61195:1999.01 1 1 1 SANS 61211:2005/IEC 61211:2004. output Performance characteristics Low-voltage power supplies.c. IDT. IDT. IDT. Ed. output Part 6: Requirements for low-voltage power supplies of assessed performance Low-voltage power supplies. 1 1 SANS 61241-2-1:1994/IEC 61241-2-1:1994. d. IDT. IDT. output Part 7: Safety requirements Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V Impulse puncture testing in air Live working .Safety specifications Low-voltage power supply devices. Ed. IDT. output Part 3: Electromagnetic compatibility (EMC) Low-voltage power supplies. 1 1 (SABS IEC 61241-2-1) SANS 61241-2-2:1993/IEC 61241-2-2:1993. 1 2 2 2 1 SANS 61241-1:2005/IEC 61241-1:2004. 1. IDT. Ed. IDT. d. 2 (SABS IEC 61230) SANS 61238-1:2003/IEC 61238-1:2003. 1 (SABS IEC 61204-3) SANS 61204-6:2000/IEC 61204-6:2000. Ed. Ed. Ed. Ed. IDT. 2 (SABS IEC 61199) SANS 61204:2007/IEC 61204:2001. IDT. 3 Edition Title 3 Multicore and symmetrical pair/quad cables for digital communications Part 3: Work area cable Sectional specification Bayonet lampholders SANS 61184:2009/IEC 61184:2008. 1 (SABS IEC 61204-6) SANS 61204-7:2008/IEC 61204-7:2006.c. 2 (SABS IEC 61211) SANS 61230:2009/IEC 61230:2008. 1 1 (SABS IEC 61241-2-2) SANS 61241-2-3:1994/IEC 61241-2-3:1994. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61156-3:2009/IEC 61156-3:2008. Ed. IDT. Ed. IDT. IDT.Safety specifications Single-capped fluorescent lamps . IDT. IDT. 1 1 SANS 61241-11:2007/IEC 61241-11:2005.1 (SABS IEC 61204) SANS 61204-3:2000/IEC 61204-3:2000. d. 2 (SABS IEC 61195) SANS 61199:1999/IEC 61199:1999. Ed. 2 (SABS IEC 61238-1) SANS 61241-0:2005/IEC 61241-0:2004. Ed. 1 3 2 Double-capped fluorescent lamps . IDT. 1 (SABS IEC 61241-4) 1 SANS 61241-10:2005/IEC 61241-10:2004.c. Optical eye pattern. IDT. 1 SANS 61284:1997/IEC 61284:1997.Test methods Part 3: Noise figure parameters Optical amplifiers . 1 1 SANS 61243-1:2007/IEC 61243-1:2003. IDT. 1 1 SANS 61241-17:2006/IEC 61241-17:2005. 1 (SABS IEC 61243-5) 2 1. 2 2 SANS 61291-1:2007/IEC 61291-1:2006. IDT. Ed. waveform and extinction ratio measurement Fibre optic communication subsystems Part 1: Generic specification Fibre optic communication system design guides Part 1: Single-mode digital and analogue systems Fibre optic communication system design guides Part 3: Calculation of link polarization mode dispersion Fibre optic communication system design guides Part 5: Accommodation and compensation of dispersion Overhead lines .Voltage detectors Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.Voltage detectors Part 3: Two-pole low-voltage type Live working . 1 (SABS IEC TR 61282-1) SANS 61282-3:2007/IEC TR 61282-3:2006.c. IDT. 1 1 (SABS IEC 61280-2-1) SANS 61280-2-2:2006/IEC 61280-2-2:2005. 2 2 (SABS IEC 61280-2-2) SANS 61281-1:1999/IEC 61281-1:1999.Receiver sensitivity and overload measurement Fibre optic communication subsystem test procedures Part 2-2: Digital systems . IDT. IDT. 2 SANS 61282-5:2003/IEC/TR 61282-5:2002. 2 (SABS IEC 61284) SANS 61290-3:2009/IEC 61290-3:2008. 1 1 (SABS IEC 61280-1-3) SANS 61280-2-1:1998/IEC 61280-2-1:1998. IDT. Ed. IDT. IDT. IDT.Requirements and tests for fittings SANS 61241-14:2005/IEC 61241-14:2004. Live working . 2 1 Page 301 . Ed. IDT. Ed.c. 2 2 1 1 2 1 1 Optical amplifiers . IDT. IDT.Central wavelength and spectral width measurement Fibre optic communication subsystem basic test procedures Part 2-1: Test procedures for digital systems . IDT. Ed. IDT. Ed. Ed. Ed.2 (SABS IEC 61243-2) SANS 61243-3:1998/IEC 61243-3:1998. IDT. Ed. Ed. Ed. IDT. Ed. IDT. Ed. Ed.02 1 1 SANS 61280-1-3:1998/IEC 61280-1-3:1998. 1 (SABS IEC 61281-1) SANS 61282-1:2000/IEC/TR 61282-1:2000.Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a. Ed. Ed. 1.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Electrical apparatus for use in the presence of combustible dust Part 14: Selection and installation Electrical apparatus for use in the presence of combustible dust Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) Electrical apparatus for use in the presence of combustible dust Part 18: Protection by encapsulation "mD" Live working .Voltage detectors Part 5: Voltage detecting systems (VDS) Fibre optic communication subsystem basic test procedures Part 1-3: Test procedures for general communication subsystems . 1 1 SANS 61241-18:2005/IEC 61241-18:2004. Ed. 1 (SABS IEC 61243-3) SANS 61243-5:1997/IEC 61243-5:1997.Test methods Part 5-1: Reflectance parameters . Ed.Optical spectrum analyzer method Optical amplifiers Part 1: Generic specification SANS 61290-5-1:2007/IEC 61290-5-1:2006. 2 (SABS IEC 61243-1) SANS 61243-2:2003/IEC 61243-2:2002. Live working . control and laboratory use . IDT. IDT. Ed. IDT. IDT. measuring and monitoring equipment used in low-voltage distribution systems Electrical equipment for measurement. control and laboratory use .Basic test and measurement procedures Part 3-39: Examinations and measurements . 1 1 SANS 61347-1:2007/IEC 61347-1:2007. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61291-2:2007/IEC 61291-2:2007. operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications Electrical equipment for measurement. IDT. 2 2 (SABS IEC 61300-3-6) SANS 61300-3-34:2009/IEC 61300-3-34:2009. 2 (SABS IEC 61291-2) SANS 61300-2-40:2000/IEC 61300-2-40:2000.Screen testing of attenuation of single-mode tuned angled optical connectors Fibre optic interconnecting devices and passive components .Basic test and measurement procedures Part 3-6: Examinations and measurements . Ed.Return loss Fibre optic interconnecting devices and passive components .Basic test and measurement procedures Part 2-40: Tests . 1 1 SANS 61326-2-2:2009/IEC 61326-2-2:2005. control and laboratory use . 1 SANS 61315:2006/IEC 61315:2005. 1 1 SANS 61326-2-1:2009/IEC 61326-2-1:2005. 3 (SABS IEC 61300-3-34) 3 SANS 61300-3-39:1997/IEC 61300-3-39:1997. Ed. IDT. IDT.EMC requirements Part 2-3: Particular requirements .01 1.Attenuation of random mated connectors Fibre optic interconnecting devices and passive components . Ed. Ed. IDT. 2 1 1 SANS 61326:2003/IEC 61326:2002. 2 (SABS IEC 61347-1) 2 SANS 61347-2-1:2006/IEC 61347-2-1:2006. Ed. Ed.Test configuration. 1 (SABS IEC 61300-2-40) Edition Title 2 Optical amplifiers Part 2: Digital applications Performance specification template Fibre optic interconnecting devices and passive components . IDT. Ed.1 (SABS IEC 61347-2-1) Page 302 . Ed.EMC requirements Part 1: General requirements Electrical equipment for measurement. 1 1 Electrical equipment for measurement. IDT. operational conditions and performance criteria for transducers with integrated or remote signal conditioning Lamp controlgear Part 1: General and safety requirements Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters) SANS 61326-1:2007/IEC 61326-1:2005. operational conditions and performance criteria for portable test. Ed.Test configurations. control and laboratory use . IDT. Ed.Basic test and measurement procedures Part 3-34: Examinations and measurements . IDT. IDT.Test configurations. IDT. 1 1 SANS 61326-2-3:2009/IEC 61326-2-3:2006. control and laboratory use . Ed.EMC requirements Part 2-1: Particular requirements . 1.PC optical connector reference plug selection Protection against lightning electromagnetic impulse Part 3: Requirements of surge protective devices (SPDs) Calibration of fibre-optic power meters 1 SANS 61300-3-6:2004/IEC 61300-3-6:2003. 1 (SABS IEC 61300-3-39) 1 SANS 61312-3:2006/IEC TS 61312-3:2000.EMC requirements Part 2-2: Particular requirements .EMC requirements Electrical equipment for measurement. Ed. 1 (SABS IEC 61378-1) SANS 61378-3:2007/IEC 61378-3:2006. IDT. 1 1 (SABS IEC 61347-2-5) SANS 61347-2-6:2000/IEC 61347-2-6:2000. 1 1 SANS 61386-22:2003/IEC 61386-22:2002. IDT. Ed. Ed. Ed. Ed. IDT. 1 SANS 61358:1996/IEC 61358:1996. Ed. IDT.Rigid conduit systems Conduit systems for cable management Part 22: Particular requirements . Ed.Flexible conduit systems SANS 61386-21:2003/IEC 61386-21:2002. supplied electronic ballasts for fluorescent lamps Lamp controlgear Part 2-4: Particular requirements for d.c. Ed. Ed. Ed. Ed. 2 2 (SABS IEC 61347-2-7) SANS 61347-2-8:2007/IEC 61347-2-8:2006.c supplied electronic ballasts for general lighting Lamp controlgear Part 2-5: Particular requirements for d.c. IDT.c.c. IDT. Ed.c. 1. IDT. or a. IDT. 1 1 (SABS IEC 61347-2-6) SANS 61347-2-7:2007/IEC 61347-2-7:2006. Ed. supplied electronic controlgear for LED modules Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) Convertor transformers Part 1: Transformers for industrial applications Converter transformers Part 3: Application guide SANS 61347-2-2:2006/IEC 61347-2-2:2006. Ed. supplied electronic step-down convertors for filament lamps Lamp controlgear Part 2-3: Particular requirements for a. 1 (SABS IEC 61358) SANS 61378-1:1997/IEC 61378-1:1997. IDT.1 (SABS IEC 61347-2-8) SANS 61347-2-9:2004/IEC 61347-2-9:2003.2 (SABS IEC 61347-2-2) SANS 61347-2-3:2005/IEC 61347-2-3:2004. 1 1 Page 303 .Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Lamp controlgear Part 2-2: Particular requirements for d. IDT. 2 (SABS IEC 61386-1) 2 Conduit systems for cable management Part 1: General requirements Conduit systems for cable management Part 21: Particular requirements . IDT. IDT. Ed. 1 1 1 1 1 1 1 SANS 61386-1:2008/IEC 61386-1:2008. IDT. 1 (SABS IEC 61347-2-11) SANS 61347-2-13:2007/IEC 61347-2-13:2006. IDT. IDT.Pliable conduit systems Conduit systems for cable management Part 23: Particular requirements .c supplied electronic ballasts for aircraft lighting Lamp controlgear Part 2-7: Particular requirements for d.1 (SABS IEC 61347-2-3) SANS 61347-2-4:2000/IEC 61347-2-4:2000. 1.01 1.1 (SABS IEC 61347-2-9) SANS 61347-2-10:2000/IEC 61347-2-10:2000. Ed. 1 (SABS IEC 61347-2-10) SANS 61347-2-11:2001/IEC 61347-2-11:2001.01 1. Ed. IDT.02 1.c supplied electronic ballasts for public transport lighting Lamp controlgear Part 2-6: Particular requirements for d. 1 1 SANS 61386-23:2003/IEC 61386-23:2002. 1. Ed. 1 1 (SABS IEC 61347-2-4) SANS 61347-2-5:2000/IEC 61347-2-5:2000. 1.c supplied electronic ballasts for emergency lighting Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps Lamp controlgear Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for highfrequency operation of cold start tubular discharge lamps (neon tubes) Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires Lamp controlgear Part 2-13: Particular requirements for d. IDT. IDT. or a.01 1. Test methods for checking the performance of devices designed for reducing explosion hazards . 2 (SABS IEC 61427) SANS 61429:1995/IEC 61429:1995. Ed.Conduit systems buried underground Secondary cells and batteries for photovoltaic energy systems (PVES) .AC power arc tests Live working . 1 1 SANS 61540:2007/IEC 61540:1999. IDT.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Conduit systems for cable management Part 24: Particular requirements . acceptance criteria and design recommendations Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V Part 1: Standard strength classes and end fittings Insulators for overhead lines . 1 1 SANS 61442:2006/IEC 61442:2005. test methods.Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V Definitions. IDT.Guide to equipment manufacturers and users Low-voltage switchgear and controlgear assemblies Part 1: General rules Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7. IDT. Ed. 1 (SABS IEC 61462) 2 2 SANS 61466-1:1997/IEC 61466-1:1997. Ed. IDT. 1. Ed.01 Page 304 .Portable phase comparators for use on voltages from 1 kV to 36 kV a. IDT. 1 1 SANS 61427:2005/IEC 61427:2005. Ed. Ed. 1 (SABS IEC 61467) SANS 61481:2005/IEC 61481:2004. IDT. Ed. 1. IDT. IDT.2 kV) up to 30 kV (Um = 36 kV) Composite hollow insulators . IDT. Live working .2 (SABS IEC 61481) 1 2 1. Ed. Ed. Ed. Ed. 1 1 Powertrack systems Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation Installation couplers intended for permanent connection in fixed installations Electrical accessories . IDT.Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods . 1 1 1 SANS 61439-2:2009/IEC 61439-2:2009.Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) SANS 61535:2009/IEC 61535:2009. IDT.Insulator strings and sets for lines with a nominal voltage greater than 1 000 V . IDT. Ed. IDT. 1 (SABS IEC 61430) 2 1 1 SANS 61438:1996/IEC 61438:1996.1 1. IDT.c. 1 (SABS IEC 61515) SANS 61534-1:2007/IEC 61534-1:2003.Lead-acid starter batteries Possible safety and health hazards in the use of alkaline secondary cells and batteries . IDT.Method 1: Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing Mineral insulated thermocouple cables and thermocouples Powertrack systems Part 1: General requirements SANS 61386-24:2005/IEC 61386-24:2004. IDT. 1 (SABS IEC 61429) SANS 61430:1997/IEC 61430:1997.02 SANS 61482-1-1:2009/IEC 61482-1-1:2009.General requirements and methods of test Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 Secondary cells and batteries . 1 (SABS IEC 61438) SANS 61439-1:2009/IEC 61439-1:2009. IDT. Ed. Ed. Ed. Ed. 1 1 1 SANS 61534-22:2009/IEC 61534-22:2009. 1 (SABS IEC 61466-1) SANS 61467:2009/IEC 61467:2008. 1 1 SANS 61515:1995/IEC 61515:1995. 2 (SABS IEC 61442) SANS 61462:2007/IEC 61462:2007. Ed. Ed. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61543:2007/IEC 61543:1995. 1 (SABS IEC 61547) SANS 61549:2005/IEC 61549:2005. IDT. Ed. 2 2 (SABS IEC 61558-2-4) SANS 61558-2-5:1997/IEC 61558-2-5:1997. Ed. power supply units and similar products Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps Safety of power transformers. 2 2 (SABS IEC 61558-2-2) SANS 61558-2-3:1999/IEC 61558-2-3:1999. 2 (SABS IEC 61558-2-13) 1 2 Page 305 . Ed. reactors. reactors. 1 1 (SABS IEC 61558-2-8) SANS 61558-2-9:2003/IEC 61558-2-9:2002. power supplies. power supplies. reactors and similar products Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers Safety of power transformers. Ed. IDT. 1 1 (SABS IEC 61558-2-3) SANS 61558-2-4:2009/IEC 61558-2-4:2009. reactors. Ed. power supplies. power supply units and similar Part 2-5: Particular requirements for shaver transformers and shaver supply units Safety of transformers. reactors and similar products Part 1: General requirements and tests Safety of power transformers. IDT. Ed. IDT. IDT. Ed. power supply units and similar devices Part 2-12: Particular requirements for constant voltage transformers Safety of transformers. IDT. 1 (SABS IEC 61558-2-12) SANS 61558-2-13:2009/IEC 61558-2-13:2009. IDT. Ed. power supply units and similar devices Part 2-3: Particular requirements for ignition transformers for gas and oil burners Safety of transformers.1 1 1. Ed. IDT. 1 1 SANS 61558-2-12:2001/IEC 61558-2-12:2001. 2 2 (SABS IEC 61558-2-6) SANS 61558-2-7:2007/IEC 61558-2-7:2007.EMC immunity requirements Miscellaneous lamps SANS 61547:1995/IEC 61547:1995. power supply units and similar products for supply voltages up to 1 100 V Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers SANS 61558-2-1:2007/IEC 61558-2-1:2007. 2 2 (SABS IEC 61558-2-7) SANS 61558-2-8:1998/IEC 61558-2-8:1998. power supply units and similar Part 2-8: Particular requirements for bell and chime transformers Safety of power transformers. Ed. reactors and similar products Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications Safety of power transformers. Ed. Ed. power supplies. Ed. power supply units and similar products for supply voltages up to 1 100 V Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers Safety of power transformers. 2 (SABS IEC 61558-1) 2 Safety of power transformers. IDT. reactors and similar products Part 2-7: Particular requirements and tests for transformers and power supplies for toys Safety of small power transformers. IDT. 1 1 (SABS IEC 61558-2-5) SANS 61558-2-6:2009/IEC 61558-2-6:2009. IDT. Ed. 2 2 (SABS IEC 61558-2-1) SANS 61558-2-2:2007/IEC 61558-2-2:2007. Ed. 1 Edition Title 1 Residual current-operated protective devices (RCDs) for household and similar use Electromagnetic compatibility Equipment for general lighting purposes . IDT.01 SANS 61558-1:2006/IEC 61558-1:2005. IDT. power supply units and similar products for supply voltages up to 1 100 V Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers Safety of power transformers. IDT. 2. Ed. 1 1 SANS 61643-311:2004/IEC 61643-311:2001. 2 (SABS IEC 61643-1) 2 SANS 61643-12:2009/IEC 61643-12:2008. IDT. IDT. IDT. IDT.Guide for testing under conditions of arcing due to internal fault Low-voltage surge protective devices Part 1: Surge protective devices connected to low-voltage power distribution systems . 2 2 SANS 61643-21:2009/IEC 61643-21:2009. power supply units and similar devices Part 2-20: Particular requirements for small reactors Safety of power transformers.Selection and application principles Components for low-voltage surge protective devices Part 311: Specification for gas discharge tubes (GDT) Components for low-voltage surge protective devices Part 321: Specification for avalanche breakdown diode (ABD) Components for low-voltage surge protective devices Part 341: Specification for thyristor surge suppressors (TSS) Electroacoustics . IDT.Performance requirements and testing methods Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks . Ed. power supply units and similar devices Part 2-23: Particular requirements for transformers for construction sites Enclosed low-voltage switchgear and controlgear assemblies . IDT. IDT. IDT. IDT. Ed. Ed. Ed. 1 (SABS IEC 61558-2-23) SANS 61641:2008/IEC/TR 61641:2008. power supply units and similar devices Part 2-19: Particular requirements for perturbation attenuation transformers Safety of power transformers. 1 (SABS IEC 61558-2-20) SANS 61558-2-23:2000/IEC 61558-2-23:2000. 2 Edition Title 1 Safety of power transformers.Sound level meters Part 3: Periodic tests Calibration of fibre optic chromatic dispersion test sets 1 1 1 1 1 SANS 61643-1:2006/IEC 61643-1:2005. 1 SANS 61672-1:2003/IEC 61672-1:2002. IDT. 1 1 SANS 61744:2006/IEC 61744:2005. 1 SANS 61643-341:2004/IEC 61643-341:2001. 1. Ed. Ed. IDT. power supply units and similar Part 2-17: Particular requirements for transformers for switch mode power supplies Safety of power transformers. Ed. 1 (SABS IEC 61558-2-19) SANS 61558-2-20:2000/IEC 61558-2-20:2000.Selection and application principles Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks . power supply units and similar Part 2-15: Particular requirements for isolating transformers for the supply of medical locations Safety of power transformers. Ed. IDT. 1 1 SANS 61672-3:2007/IEC 61672-3:2006.1 1. 1 SANS 61643-321:2004/IEC 61643-321:2001. IDT. Ed. Ed. Ed.Sound level meters Part 2: Pattern evaluation tests Electroacoustics .Standards available in electronic format (PDF) October 2009 SANS Number SANS 61558-2-15:1999/IEC 61558-2-15:1999. Ed. IDT. IDT.01 SANS 61643-22:2005/IEC 61643-22:2004. IDT. 2 2 Page 306 . Ed. Ed.Sound level meters Part 1: Specifications Electroacoustics . 1 (SABS IEC 61558-2-15) SANS 61558-2-17:1997/IEC 61558-2-17:1997.Requirements and tests Low-voltage surge protective devices Part 12: Surge protective devices connected to low-voltage power distribution systems . Ed. 1 (SABS IEC 61558-2-17) SANS 61558-2-19:2000/IEC 61558-2-19:2000. IDT. 1 1 1 1 1 SANS 61672-2:2003/IEC 61672-2:2003. Ed. Rating specifications for low voltage adjustable frequency a. power drive systems Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods Adjustable speed electrical power drive systems Part 4: General requirements .Interface definition Adjustable speed electrical power drive systems Part 7-201: Generic interface and use of profiles for power drive systems . IDT. 1 1 (SABS IEC 61753-2-1) SANS 61754-4:2002/IEC 61754-4:2002.Rating specifications for a. 1.2 (SABS IEC 61754-4) SANS 61754-13:2006/IEC 61754-13:2006. IDT. IDT. IDT. 1. 1 1 SANS 61800-6:2005/IEC/TR 61800-6:2003. IDT.Uncontrolled environment Fibre optic connector interfaces Part 4: Type SC connector family Fibre optic connector interfaces Part 13: Type FCPC connector Fibre optic connector interfaces Part 18: Type MTRJ connector family Fibre optic connector interfaces Part 20: Type LC connector family Electric appliances connected to the water mains Avoidance of backsiphonage and failure of hosesets Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection. IDT. thermal and energy Adjustable speed electrical power drive systems Part 5-2: Safety requirements . Ed. Ed. 2 2 (SABS IEC 61754-13) SANS 61754-18:2002/IEC 61754-18:2001. Ed. IDT.c. 2 Edition Title 2 Calibration of optical time-domain reflectometers (OTDR) Fibre optic interconnecting devices and passive components performance standard Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U . Ed.c. IDT. IDT. Ed. and not exceeding 35 kV Adjustable speed electrical power drive systems Part 5-1: Safety requirements . IDT. 1 1 Page 307 . 1 1 SANS 61800-7-201:2008/IEC 61800-7-201:2007. IDT.Rating specifications for low voltage adjustable speed d. IDT. Ed. 2 (SABS IEC 61800-3) SANS 61800-4:2005/IEC 61800-4:2002. Ed.1 1 1. Ed. power drive systems above 1 000 V a. power drive systems Adjustable speed electrical power drive systems Part 2: General requirements . Ed. installation.Electrical. use and maintenance of apparatus for the detection and measurement of flammable gases Adjustable speed electrical power drive systems Part 1: General requirements . 1 2 1 SANS 61800-5-1:2008/IEC 61800-5-1:2007. 1 1 1. Ed. 1 1 SANS 61800-7-1:2008/IEC 61800-7-1:2007. IDT. Ed.Functional Adjustable speed electrical power drive systems Part 6: Guide for determination of types of load duty and corresponding current ratings Adjustable speed electrical power drive systems Part 7-1: Generic interface and use of profiles for power drive systems .c. 1 (SABS IEC 61800-2) 1 SANS 61800-3:2005/IEC 61800-3:2004.02 SANS 61754-20:2002/IEC/PAS 61754-20:2001. Ed. 1 (SABS IEC 61800-1) 1 SANS 61800-2:1998/IEC 61800-2:1998. Ed. 1 (SABS IEC 61779-6) 1 SANS 61800-1:1997/IEC 61800-1:1997. IDT. Ed. IDT. Ed.c.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61746:2005/IEC 61746:2005. 1 SANS 61770:2004/IEC 61770:2004. 2 2 SANS 61800-5-2:2008/IEC 61800-5-2:2007. IDT. Ed.Profile type 1 specification SANS 61753-2-1:2000/IEC 61753-2-1:2000. Ed.01 SANS 61779-6:1999/IEC 61779-6:1999. IDT. Ed. 1 SANS 61800-7-204:2008/IEC 61800-7-204:2007.Profile type 3 specification Adjustable speed electrical power drive systems Part 7-204: Generic interface and use of profiles for power drive systems . Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61800-7-202:2008/IEC 61800-7-202:2007.Profile type 2 specification Adjustable speed electrical power drive systems Part 7-203: Generic interface and use of profiles for power drive systems . 2 2 SANS 61958:2000/IEC 61958:2000.Safety requirements Insulators for overhead lines .Voltage presence indicating systems Secondary cells and batteries containing alkaline or other non-acid electrolytes . Ed. 1 Edition Title 1 Adjustable speed electrical power drive systems Part 7-202: Generic interface and use of profiles for power drive systems . 1 1 SANS 61800-7-303:2008/IEC 61800-7-303:2007. systems with a nominal voltage greater than 1 000 V . Ed.Definitions. Ed. IDT.Mapping of profile type 1 to network technologies Adjustable speed electrical power drive systems Part 7-302: Generic interface and use of profiles for power drive systems . IDT. Ed. 1 1 Fibre optic graphical symbology SANS 61931:2004/IEC/TR 61931:1998. IDT. 1 (SABS IEC 61958) SANS 61959:2005/IEC 61959:2004. IDT. Ed. Ed. IDT. IDT. 1 1 Fibre optic . 1 1 SANS 61800-7-304:2008/IEC 61800-7-304:2007.Secondary lithium cells and batteries for portable applications Secondary batteries for the propulsion of electric road vehicles Part 1: Test parameters SANS 61939:2004/IEC 61939:2000. IDT.Tables for hand-held circular saws with a maximum saw-blade diameter of 315 mm . IDT. IDT. Ed. Ed.C. 1 SANS 61800-7-301:2008/IEC 61800-7-301:2007. test methods and acceptance criteria High-voltage prefabricated switchgear and controlgear assemblies .Composite line post insulators for A.c. IDT. Ed.Profile type 4 specification Adjustable speed electrical power drive systems Part 7-301: Generic interface and use of profiles for power drive systems . 1 1 1 SANS 61960:2005/IEC 61960:2003.Mechanical tests for sealed portable secondary cells and batteries Secondary cells and batteries containing alkaline or other non-acid electrolytes . IDT. Ed. Part 1: Common rules Saw tables for use as saw benches .Mapping of profile type 2 to network technologies Adjustable speed electrical power drive systems Part 7-303: Generic interface and use of profiles for power drive systems . IDT. 1 1 SANS 61914:2009/IEC 61914:2009. 1 1 Power installations exceeding 1 kV a. IDT. 1 1 SANS 61930:2004/IEC/TR 61930:1998. Ed. 1 1 Page 308 .Mapping of profile type 4 to network technologies Cable cleats for electrical installations 1 1 1 SANS 61800-7-302:2008/IEC 61800-7-302:2007. IDT. IDT. 1 1 SANS 61982-1:2008/IEC 61982-1:2006. 1 1 SANS 61952:2008/IEC 61952:2008. Ed.Terminology SANS 61936-1:2008/IEC 61936-1:2002. IDT. IDT. 1 SANS 61800-7-203:2008/IEC 61800-7-203:2007. Ed. Ed. Ed.Mapping of profile type 3 to network technologies Adjustable speed electrical power drive systems Part 7-304: Generic interface and use of profiles for power drive systems . Ed. 1 (SABS IEC TS 62033) SANS 62034:2008/IEC 62034:2006.01 1 SANS 62040-2:2007/IEC 62040-2:2005. Ed.Glossary of terms Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM Electricity metering equipment (a. Ed.) . IDT. 2 (SABS IEC 62040-2) SANS 62040-3:1999/IEC 62040-3:1999. 1 1.General requirements. 1 1 SANS 62053-11:2003/IEC 62053-11:2003. 1 Edition Title 1 Secondary batteries for the propulsion of electric road vehicles Part 2: Dynamic discharge performance test and dynamic endurance test Secondary batteries for the propulsion of electric road vehicles Part 3: Performance and life testing (traffic compatible. IDT. IDT. Ed.) . tests and test conditions Part 11: Metering equipment Electricity metering equipment (a. IDT. IDT. tariff and load control . Ed.1 (SABS IEC 62035) SANS 62040-1:2008/IEC 62040-1:2008. 1 1 Electricity metering .Particular requirements Part 11: Electromechanical meters for active energy (classes 0.c. IDT. 1 1 SANS 62053-23:2003/IEC 62053-23:2003. 1 1 SANS 62053-52:2006/IEC 62053-52:2005.Data exchange for meter reading.5 S) Electricity metering equipment (a. Ed. Ed. urban use vehicles) Devices for the connection of luminaires for household and similar purposes Part 1: General requirements Reliability of fibre optic interconnecting devices and passive components Part 1: Introductory guide and definitions LED modules for general lighting .c. 1 (SABS IEC 62040-3) SANS 62051:1999/IEC 62051:1999.Particular requirements Part 21: Static meters for active energy (classes 1 and 2) Electricity metering equipment (a. Ed. MOD. IDT. Ed. 1 (SABS IEC 61982-3) SANS 61995-1:2006/IEC 61995-1:2005. 1 1 1 Automatic test systems for battery powered emergency escape lighting Discharge lamps (excluding fluorescent lamps) Safety specifications Uninterruptible power systems (UPS) Part 1: General and safety requirements for UPS Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements Uninterruptible power systems (UPS) Part 3: Method of specifying the performance and test requirements Electricity metering .2 S and 0. IDT. IDT.c) . Ed. Ed. IDT. IDT. IDT.c. 1 1 Page 309 . Ed. 1 (SABS IEC 62051) 2 1 1 SANS 62051-1:2005/IEC TR 62051-1:2004. 1 1 SANS 62031:2008/IEC 62031:2008. 1 1 SANS 62053-21:2003/IEC 62053-21:2003.Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3) Electricity metering equipment (AC) . 1 1 SANS 62053-22:2003/IEC 62053-22:2003.Glossary of terms SANS 62035:2003/IEC 62035:2003.) . Ed.Safety specifications Attenuation uniformity in optical fibres SANS 61982-3:2001/IEC 61982-3:2001. Ed. Ed.Particular requirements Part 22: Static meters for active energy (classes 0. 1. 1 1 SANS 62033:2000/IEC/TS 62033:2000. IDT. Ed. 1 and 2) Electricity metering equipment (a.5.Particular requirements Part 52: Symbols SANS 62052-11:2003/IEC 62052-11:2003. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 61982-2:2003/IEC 61982-2:2002. Ed. IDT. IDT. Ed. IDT.) . 1 1 1 SANS 62005-1:2002/IEC 62005-1:2001. Ed.c. and for batteries made from them. 2 (SABS IEC 62104) SANS 62105:1999/IEC 62105:1999. 1.Payment systems Part 31: Particular requirements . Ed.Payment systems Part 52: Standard transfer specification (STS) .Payment systems Part 51: Standard transfer specification (STS) .Physical layer protocol for one-way numeric and magnetic card token carriers Electricity metering . tariff and load control Part 21: Direct local data exchange Secondary cells and batteries . Ed.Specification of the receiver data interface (RDI) Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87. 1 1 SANS 62086-2:2003/IEC 62086-2:2001. Ed. Ed. 1 1 SANS 62099:2002/IEC 62099:2001. 1 1 Secondary cells and batteries containing alkaline or other non-acid electrolytes . Ed. IDT. IDT. 1 1 SANS 62103:2005/IEC 62103:2003.Safety 1 1.01 SANS 62129:2008/IEC 62129:2006. 1 1 SANS 62086-1:2003/IEC 62086-1:2001. 1 1 SANS 62060:2002/IEC/TR 62060:2001.User guide Guidance on the measurement of wettability of insulator surfaces Electrical apparatus for explosive gas atmospheres Electrical resistance trace heating Part 1: General and testing requirements Electrical apparatus for explosive gas atmospheres Electrical resistance trace heating Part 2: Application for design.Safety requirements for portable sealed secondary cells. Ed. IDT. IDT. 1 (SABS IEC 62106) SANS 62115:2005/IEC 62115:2004.Payment systems Part 21: Framework for standardization Electricity metering . IDT. Ed.Generic specification Electronic equipment for use in power installations SANS 62055-21:2006/IEC 62055-21:2005. IDT. IDT. IDT. Ed.Monitoring of lead acid stationary batteries . 1 1 Page 310 .Payment systems Part 41: Standard transfer specification (STS) . Ed. IDT. IDT. IDT.0 MHz Electric toys .Application layer protocol for one-way token carrier systems Electricity metering . Ed. Ed. IDT. Ed. for use in portable applications Safety of equipment electrically connected to a telecommunication network SANS 62151:2003/IEC 62151:2000. Ed. Ed. IDT. 1 1 SANS 62056-21:2003/IEC 62056-21:2002. 1 (SABS IEC 62105) SANS 62106:2000/IEC 62106:2000. 1 1 SANS 62055-51:2007/IEC 62055-51:2007. IDT.Data exchange for meter reading.Static payment meters for active energy (classes 1 and 2) Electricity metering . Ed. IDT. Ed.Physical layer protocol for a two-way virtual token carrier for direct local connection Electricity metering .1 2 Characteristics of DAB receivers 1 Digital audio broadcast system . installation and maintenance Fibre optic wavelength switches . Ed. 1 1 SANS 62104:2003/IEC 62104:2003.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title Electricity metering . 1 1 SANS 62073:2006/IEC TS 62073:2003. Ed. IDT. 1 1 SANS 62055-52:2009/IEC 62055-52:2008. 1 1 SANS 62055-41:2007/IEC 62055-41:2007. IDT. IDT. 1 1 Calibration of optical spectrum analyzers SANS 62133:2005/IEC 62133:2002. Ed.5 to 108. IDT. 1 1 SANS 62055-31:2006/IEC 62055-31:2005. IDT.Methods for calculating the current density and internal electric field induced in the human body Part 2-1: Exposure to magnetic fields . Ed. IDT. 1 2 1 Page 311 . IDT.Measurement methods Microbending sensitivity Exposure to electric or magnetic fields in the low and intermediate frequency range . Ed. 1 1 SANS 62217:2006/IEC 62217:2005. 1 1 SANS 62271-3:2007/IEC 62271-3:2006. 1 1 SANS 62226-1:2006/IEC 62226-1:2004.Telescopic sticks and telescopic measuring sticks Empty enclosures for low-voltage switchgear and controlgear assemblies. 1 1 SANS 62208:2005/IEC 62208:2002. 2 (SABS IEC 62271-100) SANS 62271-101:2007/IEC 62271-101:2006. and procedures Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) Polymeric insulators for indoor and outdoor use with a nominal voltage >1000 V . IDT. IDT.c. 1 1 SANS 62231:2006/IEC 62231:2006. IDT. IDT. Ed.Spark-test method SANS 62193:2006/IEC 62193:2003.Human models. Ed. IDT. 1 1 Composite station post insulators for substations with a.Methods for calculating the current density and internal electric field induced in the human body Part 1: General Exposure to electric or magnetic fields in the low and intermediate frequency range . test methods and acceptance criteria Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Secondary cells and batteries containing alkaline or other non-acid electrolytes .Standards available in electronic format (PDF) October 2009 SANS Number SANS 62155:2003/IEC 62155:2003. IDT. IDT. 1 1 SANS 62226-2-1:2006/IEC 62226-2-1:2004. 1 1 SANS 62271-100:2009/IEC 62271-100:2008. IDT. IDT. Ed. Ed. Ed. Ed. test methods and acceptance criteria Optical fibres . Ed. 1 1 SANS 62209-1:2006/IEC 62209-1:2005. Ed. 1 1 SANS 62259:2005/IEC 62259:2003. Ed.2D models Electric cables . Ed. voltages greater than 1000 V up to 245 kV Definitions. 1 1 SANS 62262:2004/IEC 62262:2002. IDT.Nickel-cadmium prismatic secondary single cells with partial gas recombination Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) High-voltage switchgear and controlgear Part 1: Common specifications High-voltage switchgear and controlgear Part 3: Digital interfaces based on IEC 61850 High-voltage switchgear and controlgear Part 100: Alternating-current circuit-breakers High-voltage switchgear and controlgear Part 101: Synthetic testing SANS 62233:2006/IEC 62233:2005. Ed. instrumentation. IDT.General definitions. Ed. Ed. 1 1 SANS 62271-1:2008/IEC 62271-1:2007. 1 1 SANS 62230:2007/IEC 62230:2006. Ed. Ed.General requirements Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices . 1 1 SANS 62221:2002/IEC/TR 62221:2001. IDT. IDT. IDT. 1 Edition Title 1 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V Live working . IDT. IDT. Ed. and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV High-voltage switchgear and controlgear Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1kV and up to and including 52 kV High-voltage switchgear and controlgear Part 202: High-voltage/low-voltage prefabricated substation High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV High-voltage switchgear and controlgear Part 205: Compact switchgear assemblies for rated voltages above 52 kV High-voltage switchgear and controlgear Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV . IDT. Ed. Ed. Ed. IDT. IDT. 1 Page 312 . IDT.Fluidfilled and extruded insulation cables .5 kV and above High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches High-voltage switchgear and controlgear Part 110: Inductive load switching High-voltage switchgear and controlgear Part 111: Overhead. Ed. pad-mounted. 1 1 1 1 1 1 SANS 62271-300:2007/IEC TR 62271-300:2006. Ed. IDT.Fluid-filled and dry-type cable-terminations High-voltage switchgear and controlgear Part 300: Seismic qualification of alternating current circuitbreakers 1 1 1 1 SANS 62271-109:2009/IEC 62271-109:2008. 1 Edition Title 1 High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches High-voltage switchgear and controlgear Part 104: Alternating current switches for rated voltages of 52 kV and above High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72. 1 SANS 62271-203:2004/IEC 62271-203:2003. Ed. IDT. Ed. Ed. 1 SANS 62271-207:2007/IEC 62271-207:2007. Ed. 1 SANS 62271-205:2008/IEC 62271-205:2008. IDT. Ed. 1 SANS 62271-209:2007/IEC 62271-209:2007. 1 SANS 62271-108:2007/IEC 62271-108:2005. IDT. 1 SANS 62271-104:2009/IEC 62271-104:2009. Ed. IDT. 1 2 2 1 SANS 62271-200:2004/IEC 62271-200:2003. IDT. 1 SANS 62271-105:2003/IEC 62271-105:2002. 1 1 SANS 62271-201:2007/IEC 62271-201:2006. dry vault. 1 1 SANS 62271-202:2007/IEC 62271-202:2006. 2 SANS 62271-111:2007/IEC 62271-111:2005. IDT. IDT. 1 Ed. 1 SANS 62271-107:2006/IEC 62271-107:2005. 2 SANS 62271-110:2009/IEC 62271-110:2009. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 62271-102:2003/IEC 62271-102:2001. Ed. Ed. IDT. 2 SANS 62282-3-3:2008/IEC 62282-3-3:2007. IDT. 2 1 SANS 62335:2009/IEC 62335:2008. 2 Ed. IDT. IDT. Ed. 1 1 1 SANS 62305-3:2007/IEC 62305-3:2006. IDT. IDT. Ed. IDT. Ed. 1 1 SANS 62311:2008/IEC 62311:2007.300 GHz) Guidance for the interpretation of OTDR backscattering traces Circuit breakers . IDT. 1 (SANS 62305-3) SANS 62305-4:2007/IEC 62305-4:2006. Ed.Installation Protection against lightning Part 1: General principles Protection against lightning Part 2: Risk management Protection against lightning Part 3: Physical damage to structures and life hazard Protection against lightning Part 4: Electrical and electronic systems within structures Static transfer systems (STS) Part 1: General and safety requirements Static transfer systems (STS) Part 2: Electromagnetic compatibility (EMC) requirements Static transfer systems (STS) Part 3: Method for specifying performance and test requirements Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz . 1 1 SANS 62384:2008/IEC 62384:2006. 1 1 SANS 62316:2007/IEC TR 62316:2007. IDT. 1 1 SANS 62305-1:2007/IEC 62305-1:2006. 1 Ed. Ed. Ed. 1 Ed. 1 (SANS 62305-1) SANS 62305-2:2007/IEC 62305-2:2006. Ed. IDT. Ed. 1 1 SANS 62310-2:2006/IEC 62310-2:2006. IDT. 1 SANS 62271-308:2007/IEC 62271-308:2002. 1 1 SANS 62271-310:2008/IEC/TR 62271-310:2008. IDT. Ed. Ed.Switched protective earth portable residual current devices for class I and battery powered vehicle applications Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V DC or AC supplied electronic control gear for LED modules . 1 1 SANS 62552:2008/IEC 62552:2007. 1 1 Page 313 . Ed. IDT. IDT.Characteristics and test methods SANS 62271-301:2005/IEC/TR 62271-301:2004.Performance requirements Household refrigerating appliances . Ed. Ed. 1 1 1 SANS 62310-1:2005/IEC 62310-1:2005. IDT. 1 SANS 62271-304:2008/IEC/TS 62271-304:2008. 1 1 SANS 62371:2008/IEC/TS 62371:2008. IDT. 1 1 SANS 62310-3:2008/IEC 62310-3:2008. IDT. Ed.Standards available in electronic format (PDF) October 2009 SANS Number Edition Title High-voltage switchgear and controlgear Part 301: Dimensional standardisation of terminals High-voltage switchgear and controlgear Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions High-voltage switchgear and controlgear Part 308: Guide for asymmetrical short-circuit breaking test duty T100a High-voltage switchgear and controlgear Part 310: Electrical endurance testing for circuit-breakers above a rated voltage of 52 kV Fuel cell technologies Part 3-3: Stationary fuel cell power systems . Ed. IDT. IDT. Classification of the electromagnetic environment conditions for equipment in telecommunication networks Access network xDSL transmission filters Part 1: ADSL splitters for European deployment Sub-part 1: Generic specification of the low pass part of DSL over POTS splitters including dedicated annexes for specific xDSL variants Access network xDSL transmission filters Part 1: ADSL splitters for European deployment Sub-part 2: Specification of the high pass part of ADSL/POTS splitters Access network xDSL transmission filters Part 1: ADSL splitters for European deployment Sub-part 3: Specification of ADSL/ISDN splitters Access network xDSL transmission filters Part 1: ADSL splitters for European deployment Sub-part 4: Specification of ADSL over "ISDN or POTS" universal splitters Access network xDSL transmission filters Part 1: ADSL splitters for European deployment Sub-part 5: Specification for ADSL over POTS distributed filters Broadband Radio Access Networks (BRAN).1 1 SANS 101952-1-3:2006/ETSI TS 101952-1-3:2002. IDT.1. Ed. Advisory Notes to Standards Harmonizing Terminal Interface Part 2: Generally applicable Advisory Notes. Data Link Control (DLC) layer Broadband Radio Access Networks (BRAN). IDT. IDT. Sub-part 1: Modification to sending spectral density requirements SANS 100013:2003/ISO/TR 10013:2001. 1 Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 90003:2004/ISO/IEC 90003:2004. V1. V1. Ed.3.2.1. V1. IDT.2. IDT. IDT. Ed. V1. V1. IDT.1 1 SANS 101952-1-2:2006/ETSI TS 101952-1-2:2002. Ed. IDT.1 1 SANS 101952-1-1:2006/ETSI TS 101952-1-1:2004. Ed. Ed. Ed. Ed.3.2 SANS 102210:2006/ETSI TS 102210:2005.Basic and general concepts and associated terms (VIM) Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT.Guidelines for the application of ISO 9001:2000 to computer software Guidelines for quality management system documentation Electromagnetic compatibility and Radio spectrum Matters (ERM).1.2 SANS 102178:2006/ETSI TS 102178:2006. V1. Analogue Access to Public Telephone Network. V1. V1. 1 1 (SABS ETSI TR 100053) SANS 100098-3:2009/ISO/IEC Guide 98-3:2008. IDT. IDT. HIPERMAN.1. System profiles Access and Terminals (AT). IDT. V1. Radio site engineering for radio equipment and systems in the mobile service Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) International vocabulary of metrology . Ed. IDT. HiperMAN.1 1 1 1 1 1 Page 314 . Ed. Ed. 1 3 SANS 101651:2005/ETSI TR 101651:1999. HiperMAN. IDT.1 SANS 101952-1-4:2006/ETSI TS 101952-1-4:2002. V1.1. 1 1 SANS 100053:1998/ETSI TR 100 053:1998. Ed.1 SANS 103000-2-1:2005/ETSI TR 103000-2-1:2002. Ed. 1 Edition Title 1 Software engineering . 1 SANS 100099:2008/ISO/IEC Guide 99:2007.1 1 1 SANS 101952-1-5:2006/ETSI TS 101952-1-5:2003. Ed.1 SANS 102177:2006/ETSI TS 102177:2006.1. Physical (PHY) layer Broadband Radio Access Networks (BRAN). Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector. Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications Public Switched Telephone Network (PSTN). Land mobile service. Advisory Notes to Standards harmonizing terminal interface Part 4: Information arising from CEC decisions. Specific requirements for terminals Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 103000-4-1:2005/ETSI TR 103000-4-1:2003. Land Mobile Service. IDT.1 2 1 1 SANS 201729:2005/ETSI ES 201729:2000.1 SANS 201187:2005/ETSI ES 201187:1999. 2-wire analogue voice band switched interfaces.1 SANS 201468:2004/ETSI ES 201468:2002. IDT.1 Edition Title 1 Access and Terminals (AT). Sub-part 1: General loop steady state requirements Electromagnetic compatibility and Radio spectrum Matters (ERM).2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM) . V1. V1. V1.1 1 SANS 300103:1990/ETS 300103:1990. V1. Support of CCITT Recommendation X. Ed. IDT.2 of the R&TTE Directive Integrated Services Digital Network (ISDN). IDT. Ed. Analogue Access to Public Network.5. Radio equipment with an internal or external RF connector intended primarily for analogue speech Part 1: Technical characteristics and methods of measurement Electromagnetic compatibility and Radio spectrum Matters (ERM).1 1 SANS 300086-2:2005/ETSI EN 300086-2:2001. IDT. IDT (SABS ETS 300103) 1 SANS 300113-1:2005/ETSI EN 300113-1:2003. Radio equipment with an internal or external RF connector intended primarily for analogue speech Part 2: Harmonized EN covering essential requirements under article 3. Part 2: Harmonized EN covering essential requirements under article 3. V1. Ed. V1.1. Ed. Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector. IDT. V1.5.3. IDT. IDT. Radio site engineering for radio equipment and systems 2-wire analogue voice band interfaces.21. Synchronous and asynchronous terminal adaption functions Electromagnetic compatibility and Radio spectrum Matters (ERM).2. X. Ed.1. Ed.2. Loop Disconnect (LD) dialling specific requirements Electromagnetic compatibility and Radio spectrum Matters (ERM). Ed. Land mobile service.1 1 SANS 300127:1999/EN 300127:1999. Ed.Radiated emission testing of physically large telecommunication systems SANS 200053:2006/ETSI EG 200053:2004. Part 1: Technical characteristics and methods of measurement Electromagnetic compatibility and Radio spectrum Matters (ERM).20 bis based Data Terminal Equipments (DTEs) by an ISDN. Ed.1 1 SANS 300113-2:2005/ETSI EN 300113-2:2003. V1. Land Mobile Service.1. V1.1.21 bis and X. Timed break recall (register recall). IDT (SABS EN 300127) 1 Page 315 .1 1 SANS 300086-1:2005/ETSI EN 300086-1:2001. V1. Parameters for radio systems for the transmission of digital signals operating at 32 GHz and 38 GHz Fixed Radio Systems. Ed. Common Interface (CI) Part 1: Overview Digital Enhanced Cordless Telecommunications (DECT). V2.1 1 SANS 300234:2005/ETSI EN 300234:2001.3. Ed.1 SANS 300197:2005/ETSI EN 300197:2002. Point-to-point equipment. IDT. V2. Ed. IDT. Ed.1 1 1 1 1 2 SANS 300220-3:2005/ETSI EN 300220-3:2000. Short Range Devices (SRD).2. IDT. IDT. Power supply interface at the input to telecommunications equipment Part 2: Operated by direct current (dc) Environmental Engineering (EE).1. 1 1 SANS 300132-2:2004/ETSI EN 300132-2:2003. V1. IDT.5. V1. High capacity digital radio systems carrying 1 x STM-1 signals and operating in frequency bands with about 30 MHz channel spacing and alternated arrangements SANS 300132-1:2004/ETS 300132-1:1996.3. On-site paging service Part 2: Harmonized EN under article 3. Power supply interface at the input to telecommunications equipment Part 3: Operated by rectified current source. Ed.1 SANS 300220-1:2006/ETSI EN 300220-1:2006. Ed. Point-to-point equipment. 2 Edition Title 1 Radio Equipment and Systems (RES).1 SANS 300198:2005/ETSI EN 300198:2002.1 MHz to 868. Common Interface (CI) Part 2: Physical Layer (PHL) Fixed Radio Systems. V1. Short Range Devices (SRD).9. V1. V1. alternating current source or direct current source up to 400 V Digital Enhanced Cordless Telecommunications (DECT). IDT. Ed. Part 3: Harmonized EN covering essential requirements under article 3. Part 1: Technical characteristics and test methods Electromagnetic compatibility and Radio spectrum Matters (ERM). Power supply interface at the input to telecommunications equipment Part 1: Operated by alternating current (ac) derived from direct current (dc) sources Environmental Engineering (EE). V1. On-site paging service Part 1: Technical and functional characteristics. Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW. Ed. IDT. IDT. IDT.9. V1.1.1 1 1 SANS 300175-1:2005/ETSI EN 300175-1:2005. Point-to-point equipment.1 1 SANS 300224-2:2005/ETSI EN 300224-2:2001. Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW.1 SANS 300175-2:2005/ETSI EN 300175-2:2005.2 SANS 300132-3:2004/ETSI EN 300132-3:2003. Ed.6. IDT.2 1 Page 316 . Ed. IDT. V1. Parameters for radio systems for the transmission of digital signals operating at 23 GHz Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT. including public access services Equipment Engineering (EE).2 of the R&TTE Directive Fixed Radio Systems. Ed.1 MHz. Common air interface specification to be used for the interworking between cordless telephone apparatus in the frequency band 864.1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 300131:2006/I-ETS 300131:1994.1 1 SANS 300224-1:2005/ETSI EN 300224-1:2001. IDT. Ed. Ed.1. including test methods Electromagnetic compatibility and Radio spectrum Matters (ERM).2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM). 5.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM).4 GHz ISM band and using wide band modulation techniques. ElectroMagnetic Compatibility (EMC) requirements Radio Broadcasting Systems. IDT.3. V1. portable and fixed receivers Digital Video Broadcasting (DVB). IDT. Digital Audio Broadcasting (DAB) to mobile. Framing structure. Short Range Devices (SRD). Telecommunication network equipment.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM). Ed. IDT. Land Mobile Service. IDT.2. V1. V1. Ed.1 Edition Title 1.5 MHz Fixed Radio Systems. Ed. IDT.2. IDT. Part 2: Harmonized EN under article 3. Ed.3 SANS 300421:2007/ETS 300421:1997.3.1. IDT.1. channel coding and modulation for 11/12 GHz satellite services Electromagnetic compatibility and Radio spectrum Matters (ERM). Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz. Parameters for radio system for the transmission of digital signals operating in the frequency range 24. IDT. IDT. Ed.1 2 SANS 300339:1998/EN 300339:1998. Short Range Devices (SRD). Wideband transmission systems. Point-to-point equipment.4.Standards available in electronic format (PDF) October 2009 SANS Number SANS 300249:2007 (SABS 300249) SANS 300296-2:2004/ETSI EN 300296-2:2001. Ed. Ed. Wireless microphones in the 25 MHz to 3 GHz frequency range Part 1: Technical characteristics and test methods Digital Video Broadcasting (DVB). Ed. IDT. Framing structure. Harmonized EN covering essential requirements under article 3. V1. V1. IDT (SABS EN 300339) 1 SANS 300386:2006/ETSI EN 300386:2005.3.50 GHz 1 SANS 300328:2007/ETSI EN 300328:2006. Ed. V1.1 2 1 SANS 300431:2005/ETSI EN 300431:2002.7.3 (SABS ETSI EN 300386) SANS 300401:2005/ETSI EN 300401:2001.General ElectroMagnetic Compatibility (EMC) for radio communications equipment Electromagnetic compatibility and Radio spectrum Matters (ERM).2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM) . Parameters for radio systems for the transmission of STM-1 digital signals operating in the 18 GHz frequency band with channel spacing of 55 MHz and 27.1 1 Page 317 . television receive-only equipment used in the broadcasting satellite service Electromagnetic compatibility and Radio spectrum Matters (ERM).1 2 SANS 300330-2:2006/ETSI EN 300330-2:2006. IDT. V1. V1. Point-to-point equipment. Part 1: Technical characteristics and test methods Electromagnetic compatibility and Radio spectrum Matters (ERM).2 3 1 2 1 SANS 300429:2003/EN 300429:1998. V1. Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz. V1. Ed.4. Data transmission equipment operating in the 2.01 Satellite earth stations. channel coding and modulation for cable systems Fixed Radio Systems.1 2 SANS 300330-1:2006/ETSI EN 300330-1:2006.50 GHz to 29.2 (SABS ETS 300421) SANS 300422-1:2006/ETSI EN 300422-1:2000.1 (SABS ETS 300429) SANS 300430:2005/ETSI EN 300430:2002. Radio equipment using integral antennas intended primarily for analogue speech Part 2: Harmonized EN covering essential requirements under article 3. Ed. V1. 1 2 2 2 1 1 SANS 300636:2005/ETSI EN 300636:2001.2. Ed. V1. Short range devices. V1.1 (SABS ETS 300468) SANS 300472:2007/ETS 300472:2003. V1.3. Point-to-point equipment. HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1. V1.4 GHz frequency band Fixed Radio Systems. Time Division Multiple Access (TDMA). IDT.3. IDT.1. Ed.1 SANS 300744:2005/ETSI EN 300744:2004. V1. Ed. Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5. Radio equipment to be used in the 1 GHz to 40 GHz frequency range Part 1: Technical characteristics and test methods Digital Video Broadcasting (DVB) . Ed. IDT.1 1 1 Digital Video Broadcasting (DVB). Ed. Conformance testing specification Part 1: Radio type approval and Radio Frequency (RF) conformance test specification Fixed Radio Systems. V1.1 1 SANS 300674-1:2006/ETSI EN 300674-1:2004. Framing structure.1 SANS 300786:2005/ETSI EN 300786:2001. IDT.6 GHz Fixed Radio Systems.Standards available in electronic format (PDF) October 2009 SANS Number SANS 300440-1:2006/ETSI EN 300440-1:2001. channel coding and modulation for digital terrestrial television Fixed Radio Systems. Ed. IDT. Specification for conveying ITU-R System B Teletext in DVB bitstreams Digital Video Broadcasting (DVB). Sub-STM-1 digital radio systems operating in the 13 GHz. IDT. Point-to-point equipment. Ed. V1. 1 1 SANS 301021:2005/ETSI EN 301021:2003. Ed.2 (SABS ETS 300473) SANS 300630:2005/ETSI EN 300630:2001. V1. IDT.3.2.1 GHz to 2. V1.1 1 Page 318 . Sub-STM-1 digital radio systems operating in the 13 GHz. IDT.8 GHz Industrial. Low capacity point-to-point digital radio systems operating in the 1.5. V1. IDT.1 (SABS ETS 300472) SANS 300473:2007/ETS 300473:1997.7. IDT. IDT. Ed. Scientific and Medical (ISM) band Part 1: General characteristics and test methods for Road Side Units (RSU) and On-Board Units (OBU) Enhanced Teletext specification SANS 300468:2007/ETS 300468:2006. Point-to-multipoint equipment. Road Transport and Traffic Telematics (RTTT).3. 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar and 14 MHz cross-polar channel spacing Electromagnetic compatibility and Radio spectrum Matters (ERM).1 Edition Title 1 Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT. IDT. Ed.Specification for Service Information (SI) in DVB systems Digital Video Broadcasting (DVB). Low and medium capacity point-to-point digital radio systems operating in the frequency range 2.6. Ed. Ed. Point-tomultipoint digital radio systems in frequency bands in the range 1 GHz to 3 GHz Fixed Radio Systems. V1.1 SANS 300633:2005/ETSI EN 300633:2001. Ed. Point-tomultipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz 1 SANS 300836-1:2006/ETS 300836-1:1998. Time Division Multiple Access (TDMA). Ed. V1. Satellite Master Antenna Television (SMATV) distribution systems Fixed Radio Systems. Point-to-point equipment. V1.1 1 SANS 300639:2005/ETSI EN 300639:2001.3.3. IDT. Point-to-point equipment.3. Point-to-multipoint equipment.1 1 SANS 300706:2007/ETSI EN 300706:2003. 15 GHz and 18 GHz frequency bands with about 14 MHz co-polar channel spacing Broadband Radio Access Networks (BRAN). V1.2 1 SANS 301216:2005/ETSI EN 301216:2001.3. IDT.25 GHz to 29. Transmit-only. V1.3.1 2 Page 319 . Cordless audio devices in the range 25 MHz to 2 000 MHz Part 1: Technical characteristics and test methods Digital Enhanced Cordless Telecommunications (DECT). Ed. Transmit-only. IDT. Ed. Ed.2.1 Edition Title 1 Electromagnetic compatibility and Radio spectrum Matters (ERM).Standards available in electronic format (PDF) October 2009 SANS Number SANS 301091-2:2008/ETSI EN 301091-2:2004.2. Point-to-multipoint equipment. V1. Plesiochronous Digital Hierarchy (PDH).1.1 1 SANS 301213-1:2005/ETSI EN 301213-1:2002.1 1 SANS 301428:2008/ETSI EN 301428:2006.2 of the R&TTE Directive SANS 301127:2005/ETSI EN 301127:2002.3.5. IDT. Ed. Road Transport and Traffic Telematics (RTTT). V 1.1 1 SANS 301277:2005/ETSI EN 301277:2001. Harmonized EN for Very Small Aperture Terminal (VSAT). V1. IDT. V1. Short Range Devices.2 of the R&TTE Directive. High capacity digital radio systems transmitting STM-4 or 4 x STM-1 in a 40 MHz radio frequency channel using Co-Channel Dual Polarized (CCDP) operation Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT.2 of the R&TTE directive Satellite Earth Stations and Systems (SES). IDT. Ed. IDT.1.2. Point-to-point equipment. IDT. IDT. Point-to-multipoint digital radio systems in frequency bands in the range 24. Generic radio Satellite Earth Stations and Systems (SES).1 1 SANS 301357-1:2006/ETSI EN 301357-1:2006. Ed. V1. IDT. Radar equipment operating in the 76 GHz to 77 GHz range. transmit-and-receive. Harmonized EN for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11-12/13-14 GHz frequency bands covering essential requirements under article 3. Ed.2. Low and medium capacity and STM-O digital radio system operating in the frequency bands in the range 3 GHz to 11 GHz Fixed Radio Systems. Part 2: Harmonized EN covering essential requirements of article 3. Low and medium capacity digital radio systems operating in the 13 GHz. Ed. High capacity digital radio systems carrying SDH signals (up to 2 x STM-1) in frequency bands with about 30 MHz channel spacing and using co-polar arrangements or Co-Channel Dual Polarized (CCDP) operation Fixed Radio Systems. Ed. V1. transmit/receive or receiveonly satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.3. Point-to-point equipment. receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering essential requirements under article 3. 15 GHz and 18 GHz frequency bands Fixed Radio Systems. Ed. Ed.1 1 SANS 301443:2008/ETSI EN 301443:2006. Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering essential requirements under article 3. IDT.2 of the R&TTE directive Satellite Earth Stations and Systems (SES).5 GHz using different access methods Part 1: Basic parameters Fixed Radio Systems.1 1 SANS 301128:2005/ETSI EN 301128:2001.1 1 SANS 301406:2005/ETSI EN 301406:2003. V1. V1. Harmonized EN for Very Small Aperture Terminal (VSAT).1 2 SANS 301430:2005/ETSI EN 301430:2000. Point-to-point equipment. Point-to-point equipment.2 of the R&TTE Directive Fixed Radio Systems. Plesiochronous Digital Hierarchy (PDH). V1. IDT. IDT. IDT. Ed. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 4: Specific conditions for fixed radio links and ancillary equipment and services Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 2: Specific conditions for radio paging equipment Electromagnetic compatibility and Radio spectrum Matters (ERM). V1. Ed. V1. V1.3.1 (SABS ETSI EN 301489-7) 3 SANS 301489-8:2005/ETSI EN 301489-8:2002. V1.3. IDT. V1.3. Ed.2.1 1 SANS 301489-6:2005/ETSI EN 301489-6:2002.2. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 8: Specific conditions for GSM base stations Electromagnetic compatibility and Radio spectrum Matters (ERM). High capacity fixed radio systems carrying SDH signals (2 x STM-1) in frequency bands with 40 MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation Electromagnetic compatibility and Radio spectrum Matters (ERM) . Ed.2. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and nonspeech) Electromagnetic compatibility and Radio spectrum Matters (ERM). similar Radio Frequency (RF) audio link equipment.1 1 Page 320 .6. Ed.1 (SABS ETSI EN 301489-2) SANS 301489-3:2005/ETSI EN 301489-3:2002. IDT. V1. IDT. V1. Ed. IDT. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) Electromagnetic compatibility and Radio spectrum Matters (ERM).4. Point-to-point equipment. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment Electromagnetic compatibility and Radio spectrum Matters (ERM). V1. Ed.1 (SABS ETSI EN 301489-3) 2 2 2 SANS 301489-4:2005/ETSI EN 301489-4:2002. cordless audio and in-ear monitoring devices Electromagnetic compatibility and Radio spectrum Matters (ERM).3. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 11: Specific conditions for terrestrial sound broadcasting service transmitters SANS 301489-1:2005/ETSI EN 301489-1:2005.1 (SABS ETSI EN 301489-8) SANS 301489-9:2003/ETSI EN 301489-9:2002. IDT. IDT. V1.1 (SABS ETSI EN 301489-1) SANS 301489-2:2005/ETSI EN 301489-2:2002.1 2 1 SANS 301489-11:2004/ETSI EN 301489-11:2002. V1.1 (SABS ETSI EN 301489-4) 2 SANS 301489-5:2003/ETSI EN 301489-5:2002.1 (SABS ETSI EN 301489-6) 2 SANS 301489-7:2006/ETSI EN 301489-7:2005. Ed. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 301461:2005/ETSI EN 301461:2002. Ed. V1.3.ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 1: Common technical requirements Electromagnetic compatibility and Radio spectrum Matters (ERM). Ed.3.1 Edition Title 1 Fixed Radio Systems. IDT. Electromagnetic compatibility (EMC) standard for radio equipment and services Part 9: Specific conditions for wireless microphones. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 15: Specific conditions for commercially available amateur radio equipment Electromagnetic compatibility and Radio spectrum Matters (ERM). Ed.2. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 14: Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters Electromagnetic compatibility and Radio spectrum Matters (ERM).1 1 SANS 301489-24:2006/ETSI EN 301489-24:2005. IDT. V1. Ed.3. Ed.3. V1.1 1 SANS 301489-19:2004/ETSI EN 301489-19:2002. IDT. Ed.2. IDT. repeater and ancillary equipment Electromagnetic compatibility and Radio spectrum Matters (ERM).1 (SABS ETSI EN 301489-17) 2 SANS 301489-18:2003/ETSI EN 301489-18:2002.1 2 Page 321 .4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment Electromagnetic compatibility and Radio spectrum Matters (ERM). Ed. IDT. Ed. V1. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment Electromagnetic compatibility and Radio spectrum Matters (ERM).2. V1. V1. V1. V1. IDT. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment Electromagnetic compatibility and Radio spectrum Matters (ERM).1 (SABS ETSI EN 301489-12) Edition Title 2 Electromagnetic compatibility and Radio Spectrum Matters (ERM). IDT. IDT. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 17: Specific conditions for 2. Ed. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1.1 1 SANS 301489-22:2005/ETSI EN 301489-22:2003. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS) Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment SANS 301489-14:2004/ETSI EN 301489-14:2003.1 1 SANS 301489-17:2005/ETSI EN 301489-17:2002. V1. Ed. IDT.2. ElectroMagnetic compatibility (EMC) standard for radio equipment and services Part 12: Specific conditions for Very Small Aperture Terminal.1 1 SANS 301489-20:2004/ETSI EN 301489-20:2002.2. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) radio. Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) Electromagnetic compatibility and Radio spectrum Matters (ERM).2. Ed.3. IDT.5 GHz band providing data communications Electromagnetic compatibility and Radio spectrum Matters (ERM). Ed.1 1 SANS 301489-15:2004/ETSI EN 301489-15:2002. V1. IDT.2.1 1 SANS 301489-23:2005/ETSI EN 301489-23:2002. V1.Standards available in electronic format (PDF) October 2009 SANS Number SANS 301489-12:2005/ETSI EN 301489-12:2003. Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3. High capacity digital radio systems carrying STM-4 in two 40 MHz channels or 2 x STM-1 in a 40 MHz channel with alternate channel arrangement Fixed Radio Systems. Ed. ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 25: Specific conditions for CDMA 1x spread spectrum Mobile Stations and ancillary equipment Electromagnetic compatibility and Radio spectrum Matters (ERM). V2.2.2 Release 1999) Global System for Mobile communications (GSM). V1. IDT.2 Edition Title 2 Electromagnetic compatibility and Radio spectrum Matters (ERM). Point-to-point equipments and antennas. Ed. Ed.1 1 SANS 301753:2005/ETSI EN 301753:2003.2. V2. V1. Ed.Standards available in electronic format (PDF) October 2009 SANS Number SANS 301489-25:2006/ETSI EN 301489-25:2005. IDT. IDT. Generic harmonized standard for multipoint digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the 1999/5/EC Directive Fixed Radio Systems. 5 GHz high performance RLAN. Point-to-point equipment. Ed. Ed. IDT. V 9. Base Stations (BS). ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 26: Specific conditions for CDMA 1x spread spectrum Base Stations. Ed.2 of the Directive 1999/5/EC Electromagnetic compatibility and Radio Spectrum Matters (ERM). Generic harmonized standard for Point-toPoint digital fixed radio systems and antennas covering the essential requirements under article 3.2. Ed.1 1 Page 322 .1 1 SANS 301843-2:2005/ETSI EN 301843-2:2004. V2.1. V 8. IDT. V1.21 version 8.1 1 SANS 301908-1:2006/ETSI EN 301908-1:2003. covering essential requirements of article 3. V1. Multipoint equipment and antennas. Ed.1.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM). Harmonized EN for CT2 cordless telephone equipment covering essential requirements under article 3.2 1 SANS 301502:2005/ETSI EN 301502:2001. V1.2. Ed. IDT. IDT. V1.1 1 SANS 301797:2005/ETSI EN 301797:2000.3. introduction and common requirements.1 1 SANS 301893:2006/ETSI EN 301893:2005. ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services.2 of the R&TTE directive Electromagnetic compatibility and Radio spectrum Matters (ERM).1. IDT. Part 1: Common technical requirements Electromagnetic compatibility and Radio spectrum Matters (ERM).0.2 of the R&TTE Directive SANS 301489-26:2005/ETSI EN 301489-26:2005. repeaters and ancillary equipment Harmonized EN for Global System for Mobile communications (GSM).2 1 SANS 301669:2005/ETSI EN 301669:2001.1 1 SANS 301843-1:2005/ETSI EN 301843-1:2004. ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services Part 2: Specific conditions for VHF radiotelephone transmitters and receivers Broadband Radio Access Networks (BRAN). IDT. IDT. V1.3.2 of the R&TTE directive (GSM 13. Base Station and Repeater equipment covering essential requirements under article 3.2. Harmonized EN covering essential requirements of article 3.2. Ed. IDT.2 1 SANS 301511:2005/ETSI EN 301511:2003.1 1 SANS 301751:2005/ETSI EN 301751:2002. IDT. Ed. Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 1: Harmonized EN for IMT2000.3.2 of the R&TTE directive (1999/5/EC) Fixed Radio Systems. 2. Ed. Ed. Base Stations (BS). V1. IDT. Base Stations (BS). Ed. Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 6: Harmonized EN for IMT2000. Ed. CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3. Ed. V2.1 1 Page 323 . Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 7: Harmonized EN for IMT2000. Base Stations (BS). Ed.1 1 SANS 301908-5:2006/ETSI EN 301908-5:2003.1 1 SANS 301908-4:2006/ETSI EN 301908-4:2003. CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential requirements of article 3.1 Edition Title 1 Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT. CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3. V2.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM).2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM). CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.1 1 SANS 301908-9:2006/ETSI EN 301908-9:2002. V2. Base Stations (BS). Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 4: Harmonized EN for IMT2000.2. TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2.1. IDT.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM).1 1 SANS 301908-7:2006/ETSI EN 301908-7:2005.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM). Ed. Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 9: Harmonized EN for IMT2000. IDT. IDT.Standards available in electronic format (PDF) October 2009 SANS Number SANS 301908-2:2006/ETSI EN 301908-2:2003. Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 2: Harmonized EN for IMT2000. Base Stations (BS). V1.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM).2. V2.2.2 1 SANS 301908-8:2006/ETSI EN 301908-8:2002. CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3. CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM). IDT. TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2. V2.1. Base Stations (BS) Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 8: Harmonized EN for IMT2000. V2. IDT.2 of the R&TTE Directive SANS 301908-3:2006/ETSI EN 301908-3:2003.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM).1 1 SANS 301908-6:2006/ETSI EN 301908-6:2003. Base Stations (BS). IDT. Ed. Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 3: Harmonized EN for IMT2000. Base Stations (BS). Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 5: Harmonized EN for IMT2000. IDT.2 of the R&TTE Directive Part 1: Voice plus Data (V+D) Terrestrial Trunked Radio (TETRA). IDT. IDT.2 1 SANS 303035-1:2004/ETSI EN 303035-1:2001.1 1 SANS 302326-2:2008/ETSI EN 302326-2:2006. CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3. IDT.2 of R&TTE Directive for equipment operating in frequency bands where no frequency co-ordination is applied Fixed Radio Systems. Characteristics and requirements for point-to-point equipment and antennas Part 4-2: Harmonized EN covering essential requirements of Article 3. IDT.3 1 SANS 302217-4-2:2008/ETSI EN 302217-4-2:2006. Ed. Ed. IDT. Ed.2 of R&TTE Directive for antennas Fixed Radio Systems. IDT.1 1 SANS 303035-2:2004/ETSI EN 303035-2:2003.2 1 SANS 302326-3:2008/ETSI EN 302326-3:2006. FDMA/TDMA (DECT) covering essential requirements of article 3.2.1.2 of R&TTE Directive for digital systems operating in frequency bands where frequency co-ordination is applied Fixed Radio Systems. V1. V1.1 1 SANS 302217-2-2:2008/ETSI EN 302217-2-2:2004.1. V1.2 of the R&TTE Directive for Multipoint Radio Antennas Terrestrial Trunked Radio (TETRA). Harmonized EN for TETRA equipment covering essential requirements under article 3. V1. Ed. Ed. V2.2.2 of the R&TTE Directive for Digital Multipoint Radio Equipment Fixed Radio Systems. IDT. Base Stations (BS). Multipoint Equipment and Antennas Part 3: Harmonized EN covering the essential requirements of article 3.1.2. Ed. V1. Characteristics and requirements for point-to-point equipment and antennas Part 2-2: Harmonized EN covering essential requirements of Article 3. V1. V2.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM). maintenance and use of motor vehicle tyres and rims (incorporating TREDCO guidelines) Rules for the structure and drafting of national standards SANS 301908-11:2006/ETSI EN 301908-11:2004.01 Page 324 . Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 10: Harmonized EN for IMT2000. Ed.2 of the R&TTE Directive Part 2: Direct Mode Operation (DMO) The international metric system (SI).1.3 1 SANS 302217-3:2008/ETSI EN 302217-3:2005.2 1 M 33 A:1992 (M 33 A) ARP 006:1991 (ARP 006) ARP 007:1992 (ARP 007) ARP 013:2006 (ARP 013) 2 1 2 3. IDT.3.Standards available in electronic format (PDF) October 2009 SANS Number SANS 301908-10:2006/ETSI EN 301908-10:2003. Harmonized EN for TETRA equipment covering essential requirements under article 3. Multipoint Equipment and Antennas Part 2: Harmonized EN covering the essential requirements of article 3. Characteristics and requirements for point-to-point equipment and antennas Part 3: Harmonized EN covering essential requirements of Article 3. Ed. Base Stations (BS). Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 11: Harmonized EN for IMT2000.2 of the R&TTE Directive Fixed Radio Systems.1 Edition Title 1 Electromagnetic compatibility and Radio spectrum Matters (ERM).1. Guide to the use of the SI in South Africa A guide to health hazards and personal protection in the paint industry The care. V1. Ed. 1 1 ARP 062-5:2006/IEC/TS 62257-5:2005. IDT. IDT. IDT.03 1 1 1 ARP 041:1997 (ARP 041) ARP 051:2002 (ARP 051) ARP 056:2007 (ARP 056) ARP 060:2004 1 1 Steel wire rope end connections 1. 1 1 ARP 062-2:2005/IEC/TS 62257-2:2004. Ed. 1 2 1 The application of SABS 0259 with respect to the accreditation of non-destructive testing facilities for technical competence Guidelines for the installation and maintenance of street lighting Environmental guidelines for industrial wood preservation The use of reinforcement cover devices for reinforced concrete Packaging . IDT.Standards available in electronic format (PDF) October 2009 SANS Number ARP 14:2008/ISO/IEC Guide 14:2003. Ed. 1 1 Page 325 . Ed. Ed. IDT. IDT. IDT. 1 1 ARP 062-4:2006/IEC/TS 62257-4:2005.Recommendations for addressing consumer needs Barcoding for South African steel industry products 2.01 Low-smoke solid fuel (LSSF) for household use 1 Guidance on the use and application of hot-dip galvanized steel piping for the transportation of potable water in South Africa Procurement guide for large cage and wound-rotor induction motors of medium voltage Recommendations for small renewable energy and hybrid systems for rural electrification Part 1: General introduction to rural electrification Recommendations for small renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification systems Recommendations for small renewable energy and hybrid systems for rural electrification Part 3: Project development and management Recommendations for small renewable energy and hybrid systems for rural electrification Part 4: System selection and design Recommendations for small renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical hazards Recommendations for small renewable energy and hybrid systems for rural electrification Part 6: Acceptance. Ed. Ed. 1 1 ARP 062-7-1:2008/IEC/TS 62257-7-1:2006. 1 1 ARP 062-3:2006/IEC/TS 62257-3:2004. Ed. Ed. 2 Edition Title 1 Purchase information on goods and services intended for consumers Methodology for the development of standards ARP 015:1998/ISO/IEC Directives Part 2:1992. 1 1 ARP 062-6:2006/IEC/TS 62257-6:2005. IDT. IDT. NEQ (ARP 015) ARP 027:1993 (ARP 027) ARP 035:2007 (ARP 035) ARP 039:1997 (ARP 039) ARP 040:1998 (ARP 040) ARP 41:2008/ISO/IEC Guide 41:2003.Photovoltaic arrays ARP 061:2006 1 ARP 062-1:2005/IEC/TS 62257-1:2003. Ed. operation. maintenance and replacement Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-1: Generators . Selection of Photovoltaic Individual Electrification Systems (PV-IES) Recommendations for small renewable energy and hybrid systems for rural electrification Part 12-1: Selection of self-ballasted lamps (CFL) for rural electrification systems and recommendations for household lighting equipment Quality management systems . Ed. Ed. 1 ARP 062-9-4:2008/IEC/TS 62257-9-4:2006. IDT. IDT. Ed. IDT. Ed. 1 1 Content Delivery and Rights Management: Functional requirements for identifiers and descriptors for use in the music. 1 1 ARP 062-9-1:2009/IEC/TS 62257-9-1:2008. IDT.Goods ARP 067-1:2007 1 ARP 067-2:2008 1 Page 326 . IDT. video.Guidelines for the application of SANS 9001:2000 in local government Graphical symbols . sound recording and publishing industries Road transport management systems Part 1: Operator requirements .Selection of generator sets for rural electrification systems Recommendations for small renewable energy and hybrid systems for rural electrification Part 7: Generators Recommendations for small renewable energy and hybrid systems for rural electrification Part 8-1: Selection of batteries and battery management systems for stand-alone electrification systems Specific case of automotive flooded lead-acid batteries available in developing countries Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-1: Micropower systems Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-3: Integrated system . 1 1 ARP 065:2007 1 ARP 066:2006/ISO/TR 21449:2004. 1 1 ARP 063:2005/IWA 4:2005.Goods Road transport management systems Part 2: Consignor requirements . IDT.Selection of portable PV lanterns for rural electrification projects Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-6: Integrated system .User interface Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-4: Integrated system . Ed.Safety way guidance systems (SWGS) Test and fitment centres for airbags ARP 062-7:2008/IEC/TS 62257-7:2008. Ed. Ed. 1 ARP 062-9-5:2007/IEC/TS 62257-9-5:2007. Ed. 1 1 ARP 062-8-1:2007/IEC/TS 62257-8-1:2007. IDT.Standards available in electronic format (PDF) October 2009 SANS Number ARP 062-7-3:2008/IEC 62257-7-3:2008. IDT.Safety signs . 1 1 ARP 062-12-1:2008/IEC/TS 62257-12-1:2007. 1 1 ARP 064:2005/ISO 16069:2004. IDT. IDT. 1 ARP 062-9-2:2008/IEC/TS 62257-9-2:2006. Ed. 1 Edition Title 1 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set . Ed. Ed. Ed. IDT. IDT. 1 1 1 1 1 1 ARP 062-9-6:2009/IEC/TS 62257-9-6:2008.User installation Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-5: Integrated system . 1 ARP 062-9-3:2008/IEC/TS 62257-9-3:2006. IDT. Ed. film. Guidance for selection of document image compression methods Micrographics . IDT. correction or amendment of records on microforms Electronic imaging .Guidelines for the application of ISO 9001:2000 in education Regulatory requirements for explosion-protected apparatus Energy management .Guidelines for their inclusion in standards Ethanol gel fuel for cooking and other gel burning appliances Guide for addressing environmental issues in product standards Standardization and related activities . IDT. IDT. deletion. IDT. 1 1 ARP 076:2006/ISO/TR 14105:2001. IDT. IDT. IDT 1 ARP 071:2005/ISO/IEC Guide 71:2001. Ed. 1 1 ARP 077:2006/ISO/TR 18492:2005.Standards available in electronic format (PDF) October 2009 SANS Number ARP 067-3:2008 Edition Title 1 Road transport management systems Part 3: Consignee requirements . Ed.General vocabulary ARP 448:2007 1 ARP 720:2008/ISO Guide 64:2008. 1 1 ARP 76:2008/ISO/IEC Guide 76:2008. Ed.Inspection of silver-gelatin microforms for evidence of deterioration Electronic imaging . Ed. IDT.Vocabulary . Ed. 8 1 Page 327 .Expungement.Guidelines for use in standards Guidelines for standards developers to address the needs of older persons and persons with disabilities Micrographics . 1 1 ARP 073:2006/ISO/TS 12033:2001. IDT. 1 1. Ed. Ed. Ed. IDT.Human and organizational issues for successful Electronic Image Management (EIM) implementation Long-term preservation of electronic documentbased information Guidelines for the preparation of maintenance contracts Quality management systems . Ed. IDT. Ed. IDT. IDT. Ed. 1 1 ARP 075:2006/ISO/TR 12654:1997. IDT.01 1 ARP 0150:2008/ISO/IEC Guide 50:2002.Guidance on energy management Safety aspects . 1 1 ARP 074:2006/ISO/TR 12036:2000. 2 1 ARP 763:2008/ISO/IEC Guide 2:2004. 2 1 Safety aspects . IDT. Ed. Ed. 1 1 ARP 072:2006/ISO/TR 12031:2000. on WORM optical disk Development of service standards Recommendations for addressing consumer issues Electronic imaging .Guidelines for child safety ARP 068:2007 1 ARP 070:2007/ISO/IEC Guide 73:2002. Ed. 2 1 ARP 0151:2008/ISO/IEC Guide 51:1999. 1 1 ARP 078:2009 1 ARP 082:2008/IWA 2:2007. 1 1 ARP 0108:2007 (ARP 0108) ARP 136:2009/DS/INF 136:2001.Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence.Goods Inspection and non-destructive testing of previouslyinstalled OEM airbag inflator modules in motor vehicles Risk management . IDT.Rigging screws for stainless steel wire rope . 2 1 ARP 11071-2:2008/ISO/TR 11071-2:2006. Ed. 2 1 ARP 13425:2007/ISO/TR 13425:2006. IDT. Ed. 1 1 ARP 23081-2:2008/ISO/TS 23081-2:2007. Ed.Metadata for records Part 2: Conceptual and implementation issues Guidelines for using UML notation in terminology work Effects of current on human beings and livestock Part 5: Touch voltage threshold values for physiological effects Policy and guide for standardization and coordination of purchases Laminated timber for furniture ARP 7812:2005/ISO/IEC 7812-2:2000.Guideline for incident preparedness and operational continuity management Information and documentation . 1 Edition Title 1 Guidelines for information security risk management 1 Small craft . Ed. Ed. Ed. Ed. 3 1 ARP 14799-1:2008/ISO/TR 14799-1:2005. IDT. Ed. Ed. Ed. Ed. connection pins and eye-holes South African national scheme for Issuer Identification Numbers (IIN) and Application Identification numbers (AID) Comparison of worldwide lift safety standards Part 1: Electric lifts (elevators) Comparison of worldwide lift safety standards Part 2: Hydraulic lifts (elevators) Guidelines for the selection of statistical methods in standardization and specification Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and comments Lifts.Records management processes . 1 1 ARP 14799-2:2008/ISO/TR 14799-2:2005. Ed. IDT. 1 1 ARP 60479-5:2008/IEC/TR 60479-5:2007. 2. IDT. 1 1 ARP 22399:2008/ISO/PAS 22399:2007. IDT. IDT. 1 1 ARP 24156:2009/ISO/TR 24156:2008. IDT. IDT. 2 (ARP 7812) 1 ARP 11071-1:2008/ISO/TR 11071-1:2004. 1 1 CKS 0:1987 (CKS 0) CKS 5:1981 (CKS 5) CKS 8:1977 (CKS 8) CKS 9:1994 (CKS 9) CKS 23:1966 (CKS 23) 3 2 2 Melamine tableware 3 Envelopes 1 Rigid uncovered paperboard boxes Page 328 . IDT. Ed. 2 (ARP 4360) ARP 4558:2008/ISO/TR 4558:1985. IDT. 1 1 ARP 16764:2008/ISO/TR 16764:2003. Ed. IDT. ISO/IEC 7812-1:2000.Principal dimensions for forks. NEQ. NEQ. Ed. IDT.Standards available in electronic format (PDF) October 2009 SANS Number ARP 4360:2003/AS/NZS 4360:1999. escalators and passenger conveyors Comparison of worldwide safety standards on electromagnetic interference/electromagnetic compatibility Comparison of worldwide safety standards on lifts for firefighters Societal security . 1 1 ARP 16765:2008/ISO/TR 16765:2003. Standards available in electronic format (PDF) October 2009 SANS Number CKS 24:1982 (CKS 24) CKS 28:1973 (CKS 28) CKS 30:1985 (CKS 30) CKS 31:1972 (CKS 31) CKS 33:1976 (CKS 33) CKS 36:2004 (CKS 36) CKS 61:1987 (CKS 61) CKS 62:1970 (CKS 62) CKS 67:1987 (CKS 67) CKS 81:1971 (CKS 81) CKS 82:1973 (CKS 82) CKS 85:2002 (CKS 85) CKS 93:1967 (CKS 93) CKS 94:1967 (CKS 94) CKS 97:1984 (CKS 97) CKS 112:1972 (CKS 112) CKS 119:1976 (CKS 119) CKS 121:1980 (CKS 121) CKS 129:1985 (CKS 129) CKS 135:1984 (CKS 135) CKS 136:1981 (CKS 136) Edition Title 3 Corrugated board containers 2 Packs for textile goods 4 Non-insulated stainless steel food containers (for solid food. single folding beds. standards. and droppers for strained wire fences Aggregate for rapid gravity filters (Metric units) 2. liquid food and water) Insulated stainless steel food containers 2 2 Plastics book covers 4 Chalk writing boards for schools 3 Men's service type shoes (Goodyear welded with stuck-on and stitched outer soles) Cleaning benzine 2 2 Paper bags 2 Galvanized mild steel hot water cylinders 2 Steel posts. and double decker bunks Colours for textiles 5 2 Paper-cutting scissors for school use 3 Wrapping paper Page 329 .01 1 Zinc coated steel buckets 1 Tinned steel milk buckets 2 Paper-cutting scissors for office use 2 Metal crutches for adults 2 Bell tents 3 Steel single divans. stays. with tubular frames (for farm and domestic use) Total back-extension harness 2 2 Drinking mugs (stainless steel) 2.02 Meat extract 1.02 Mosquito nets (single-bed size) 1.02 Bowl stands 2 Non-metallic sanitary pails 2.Standards available in electronic format (PDF) October 2009 SANS Number CKS 137:1971 (CKS 137) CKS 138:2009 (CKS 138) CKS 139:2009 (CKS 139) CKS 140:2009 (CKS 140) CKS 141:1978 (CKS 141) CKS 142:1989 (CKS 142) CKS 143:1972 (CKS 143) CKS 146:1972 (CKS 146) CKS 155:1972 (CKS 155) CKS 156:1972 (CKS 156) CKS 157:2009 (CKS 157) CKS 160:1971 (CKS 160) CKS 161:2002 (CKS 161) CKS 163:2009 (CKS 163) CKS 167:1971 (CKS 167) CKS 168:1972 (CKS 168) CKS 174:1969 (CKS 174) CKS 177:1969 (CKS 177) CKS 178:1985 (CKS 178) CKS 179:2009 (CKS 179) CKS 181:1993 (CKS 181) Edition Title 2 Punch cards 1.02 Mustard powder 2 Paper serviettes 2 Adjustable spanners 1 8-ml Containers for freeze-dried vaccines 1 Rubber bands 3 Plastics interscrews 3.02 Custard powder 1.02 Baking powder 3 Light fuel oil 4 Heavy fuel oil 2 Coated fabrics 2 Gates. steel.01 Drip stands (for saline solutions and other fluids) 3 Drug/poison cabinets Page 330 . 01 Shorts 2 Printed.02 Examination couches Page 331 . hip-roof type 1 Hospital bed sheeting (rubber-proofed) 2 Rubber bungs 1 Autoclave indicator tape 1 Envelopes for X-ray films 1 Barriers for bridges (traffic and pedestrian) 1 Cut steel wire shot 1 Swab racks 1. side upper leather 2 Medicine spoon (plastics) 1 Sodium metasilicate pentahydrate.Standards available in electronic format (PDF) October 2009 SANS Number CKS 183:1969 (CKS 183) CKS 188:2002 (CKS 188) CKS 190:1973 (CKS 190) CKS 209:1977 (CKS 209) CKS 214:1970 (CKS 214) CKS 215:1970 (CKS 215) CKS 216:1970 (CKS 216) CKS 218:1970 (CKS 218) CKS 221:1974 (CKS 221) CKS 224:1970 (CKS 224) CKS 225:1970 (CKS 225) CKS 230:1970 (CKS 230) CKS 231:1970 (CKS 231) CKS 232:1970 (CKS 232) CKS 237:2009 (CKS 237) CKS 238:1980 (CKS 238) CKS 239:1970 (CKS 239) CKS 240:1978 (CKS 240) CKS 241:1985 (CKS 241) CKS 242:2009 (CKS 242) CKS 243:2009 (CKS 243) Edition Title 1 Inflatable splints (polyvinyl chloride) 3.01 Tea trolleys 1. technical 1 Power kerosene 1 Tents.02 Bassinets (cribs) with stands 2 Weighing scales for patients (doctor's type) 1 Commodes (wheel chair type) 2 Baby weighing scales (counter design) 2 Mayo's tables 1. 02 Women's workwear 2.02 Extension rods for hospital beds 2 Lifting poles for patients 1 Rubber hot water bottles 1 Dispensers for paper towels 1 Fish protein concentrate for human consumption 1.02 Soup powder and gravy powder 2 Diaries 1 WC Seats 1 Foundry sand 2.01 Jelly crystals 1.01 Umbilical cord fasteners 1 Clinical thermometers Page 332 .02 Magou powder (fortified) 2.Standards available in electronic format (PDF) October 2009 SANS Number CKS 245:1999 (CKS 245) CKS 250:1970 (CKS 250) CKS 251:1970 (CKS 251) CKS 253:1977 (CKS 253) CKS 259:1970 (CKS 259) CKS 260:1970 (CKS 260) CKS 261:2009 (CKS 261) CKS 263:2009 (CKS 263) CKS 265:2009 (CKS 265) CKS 266:1991 (CKS 266) CKS 282:1971 (CKS 282) CKS 285:1971 (CKS 285) CKS 286:1971 (CKS 286) CKS 289:2007 (CKS 289) CKS 290:2008 (CKS 290) CKS 301:1981 (CKS 301) CKS 302:1971 (CKS 302) CKS 305:1971 (CKS 305) CKS 311:2004 (CKS 311) CKS 312:2009 (CKS 312) CKS 317:1972 (CKS 317) Edition Title 2 Masking tape 1 General requirements for brushware 1 High speed steel tool bits 2 Waste-paper baskets for office use 1 Staples for office use 1 Paper clips 1.02 Clamps for hospital beds 1. 01 2 Plastics refuse bags (disposable) 1.02 Guard rails for hospital beds 2 Non-automated sphygmomanometers.01 Mortuary trolleys 1 Steel wool 1 Burglar-resisting bars for steel frames of ventilating type windows Peanut butter 2.02 Orthopaedic traction-pieces and hangers 1 Punch tape 1.01 Leg and body cradles 1 Rubber waterstops 1 Flexible polyvinyl chloride waterstops Page 333 .02 Recovery beds (X-ray type) 1. aneroid and mercury Oil filter elements (full flow design) 1 1 Lever arch files for stationery 1 Springback binders for stationery 1 Adjustable steel shelving 1 Adjustable wooden shelving 1.Standards available in electronic format (PDF) October 2009 SANS Number CKS 319:1972 (CKS 319) CKS 324:1972 (CKS 324) CKS 330:1993 (CKS 330) CKS 336:2008 (CKS 336) CKS 337:1972 (CKS 337) CKS 338:1972 (CKS 338) CKS 339:2009 (CKS 339) CKS 340:1979 (CKS 340) CKS 343:2009 (CKS 343) CKS 348:1972 (CKS 348) CKS 350:2009 (CKS 350) CKS 352:2002 (CKS 352) CKS 367:1973 (CKS 367) CKS 368:1973 (CKS 368) CKS 369:1973 (CKS 369) CKS 370:1973 (CKS 370) CKS 371:1973 (CKS 371) CKS 373:2009 (CKS 373) CKS 374:2009 (CKS 374) CKS 388:1973 (CKS 388) CKS 389:1973 (CKS 389) Edition Title 1 Base fabrics (suitable for coating) 1 Coated abrasives 2 Elastic mesh tubular bandages 2. 01 Protein.01 Elastic-sided chelsea boots (Goodyear welted construction) (Metric units) Firemen's top boots 1. mineral (PVM) supplementary food mixture Disinfectant for use in urinals and toilets 2 1 Vulcanized rubber products 1. vitamin. heels.01 Medical forceps (other than tooth-extracting forceps) 1 Desks 1.01 1 Adjustable glass-louvred windows 1 Boxboard filing boxes 2 Typing stencils for duplicating machines 2 Coffins and caskets 1 Physical properties of moulded rubber and plastics soles.Standards available in electronic format (PDF) October 2009 SANS Number CKS 390:2009 (CKS 390) CKS 404:1974 (CKS 404) CKS 408:1974 (CKS 408) CKS 411:2001 (CKS 411) CKS 412:2001 (CKS 412) CKS 413:1974 (CKS 413) CKS 427:1974 (CKS 427) CKS 431:1979 (CKS 431) CKS 440:1993 (CKS 440) CKS 446:1978 (CKS 446) CKS 447:2009 (CKS 447) CKS 449:1976 (CKS 449) CKS 451:1976 (CKS 451) CKS 456:2009 (CKS 456) CKS 457:1976 (CKS 457) CKS 458:2008 (CKS 458) CKS 459:1982 (CKS 459) CKS 461:1976 (CKS 461) CKS 462:2009 (CKS 462) CKS 463:1995 (CKS 463) CKS 464:1993 (CKS 464) Edition Title 2.02 Orthopaedic beds 1 Camp folding beds 1 Electrically-heated incubators for infants 1.02 Orthopaedic flannelette bandages 3 Non-body-worn urinary drainage bags 3 Nonwoven surgical dressings Page 334 . and heel top-pieces High-low beds 2.01 1 Plastics (polyolefin) containers for general use in hospitals Anti-intruder fences 1 1. and gymnastics) Fire extinguishing agent: aqueous-film-forming-foam concentrate Industrial safety spectacles for general use 1 1 1 Unproofed core-spun ducks 1 Processed core-spun ducks 1 Mobile medicine (utility drug) cabinet 1 Plastics nursery planting bags Page 335 .01 Medical scissors 1 Side upper leather (with a smooth corrected grain) 1. medau.01 Grain sorghum malt 1 Duplicator paper (groundwood grade) 1 Laminated softwood sleepers and crossing timbers 1 Vertical plan-filing cabinets 3 Field dress material (polyester-and-cotton) 1 EPDM-styrene rubber sheet (for waterproofing) 1 Laminated softwood floorboards for freight container flooring Recommended yarn linear densities (cotton industry) Coal tar fuels 1 1 1.01 Leather medicine balls 1 Rubber and plastics sports balls (medicine.01 Tooth-extracting forceps 1.Standards available in electronic format (PDF) October 2009 SANS Number CKS 467:1976 (CKS 467) CKS 468:2009 (CKS 468) CKS 469:2009 (CKS 469) CKS 471:1976 (CKS 471) CKS 479:2007 (CKS 479) CKS 482:1977 (CKS 482) CKS 484:1977 (CKS 484) CKS 487:1977 (CKS 487) CKS 488:2008 (CKS 488) CKS 489:1977 (CKS 489) CKS 490:1978 (CKS 490) CKS 500:1978 (CKS 500) CKS 503:1978 (CKS 503) CKS 516:2002 (CKS 516) CKS 517:1978 (CKS 517) CKS 532:1979 (CKS 532) CKS 552:1980 (CKS 552) CKS 553:1980 (CKS 553) CKS 554:1980 (CKS 554) CKS 556:1981 (CKS 556) CKS 559:1981 (CKS 559) Edition Title 1 Steel office pins 1. 01 Target repair stickers.02 Polypropylene grain bags 2.01 Footstools for hospital use 1.Standards available in electronic format (PDF) October 2009 SANS Number CKS 562:1982 (CKS 562) CKS 583:1983 (CKS 583) CKS 587:1983 (CKS 587) CKS 596:1998 (CKS 596) CKS 605:1987 (CKS 605) CKS 609:2004 (CKS 609) CKS 610:1986 (CKS 610) CKS 611:1987 (CKS 611) CKS 612:1987 (CKS 612) CKS 613:2009 (CKS 613) CKS 615:1991 (CKS 615) CKS 617:2009 (CKS 617) CKS 618:2009 (CKS 618) CKS 622:1990 (CKS 622) CKS 624:1991 (CKS 624) CKS 627:1987 (CKS 627) CKS 629:2002 (CKS 629) CKS 630:2009 (CKS 630) CKS 632:2001 (CKS 632) CKS 633:2008 (CKS 633) CKS 635:2009 (CKS 635) Edition Title 1 Mosquito netting 1 Special requirements for resin-treated cellulosic fabrics Trichloroisocyanurate tablets 1 2 Scholastic stationery 1 Pressure regulators for medical gases 1.01 Bed tilting devices 1 Foam mattresses for hospitals 1.03 Adjustable ward beds Page 336 .01 Textured soya protein foodstuffs 1.01 Worcestershire sauce 1 Paper rolls for teleprinters 2 Anaesthetic machines 1 Fusible interlinings 1. salad cream and salad dressing 1. self-adhesive type 1 Bond paper 1 Paper for letterpress printing 1 Paper for offset lithographic printing 2.02 Mayonnaise.03 Processed and low-flammable polyester canvas 1. cottage. disposable diapers 1 Non-woven cleaning wipes 1 Fanfold Stationery 1 Film carbon 1 Office staplers 1 Carbonless copy paper 1 DDT wettable powder for malaria vector control 1.01 Dehydrated vegetables 1 Facsimile paper 1 Elasticated.01 Disposable non-woven laminated surgical fabrics 1 Portable steam sterilizers for unwrapped instruments and utensils Disposable spun-laced surgical fabric 1 1 NRS definitions Part 2: Electricity pricing NRS 001:2004 (NRS 001) NRS 002:2000 (NRS 002) NRS 003-2:1996 (NRS 003-2) 2 Code of practice for the drafting and presentation of specifications Graphical symbols for electrical diagrams 2 1.c.01 Metal-clad switchgear . voltages above 1 kV and up to and including 24 kV Part 2: Standardized panels Page 337 .01 Orthopaedic cord 1 Elasticated tubular bandages 1 Transparency films for use in photocopiers 1.Standards available in electronic format (PDF) October 2009 SANS Number CKS 637:1992 (CKS 637) CKS 638:2001 (CKS 638) CKS 641:1993 (CKS 641) CKS 643:1993 (CKS 643) CKS 646:2009 (CKS 646) CKS 647:1996 (CKS 647) CKS 648:2002 (CKS 648) CKS 649:1999 (CKS 649) CKS 653:1998 (CKS 653) CKS 668:1987 (CKS 668) CKS 672:1988 (CKS 672) CKS 673:1989 (CKS 673) CKS 675:1990 (CKS 675) CKS 676:2005 (CKS 676) CKS 677:1990 (CKS 677) CKS 679:2002 (CKS 679) NRS 000-2:2009 Edition Title 1 Tents (Hip-roof. bow and bell types) 1.For rated a. Token encoding and data encryption and decryption Electricity sales systems Part 6: Interface standards Section 8: Standard transfer specification/Disposable magnetic token technology .Credit dispensing unit Electrical sales systems Part 6: Interface standards Section 4: Data transfer by physical media .Standards available in electronic format (PDF) October 2009 SANS Number NRS 009-2-1:1998 (NRS 009-2-1) NRS 009-2-2:1995 (NRS 009-2-2) NRS 009-2-3:1998 (NRS 009-2-3) NRS 009-2-4:1997 (NRS 009-2-4) NRS 009-2-5:1997 (NRS 009-2-5) NRS 009-3:2001 (NRS 009-3) NRS 009-4:2005 (NRS 009-4) NRS 009-5:1998 (NRS 009-5) NRS 009-6-1:1997 (NRS 009-6-1) NRS 009-6-3:1997 (NRS 009-6-3) NRS 009-6-4:1998 (NRS 009-6-4) NRS 009-6-6:2002 (NRS 009-6-6) Edition Title 1 Electricity sales systems Part 2: Functional and performance requirements Section 1: System master stations Electricity sales systems Part 2: Functional and performance requirements Section 2: Credit dispensing units Electricity sales systems Part 2: Functional and performance requirements Section 3: Security module Electricity sales systems Part 2: Functional and performance requirements Section 4: Standard token translators Electricity sales systems Part 2: Functional and performance requirements Section 5: Error handling Electrical sales systems Part 3: Database format 1 1 1 1 1.Categories of token and transaction data fields Electricity sales systems Part 6: Interface standards Section 7: Standard transfer specification/ Credit dispensing unit .Section 1: Credit dispensing unit .01 1 Electricity sales systems Part 4: National prepayment electricity meter cards Electricity sales systems Part 5: Testing of subsystems Electricity sales systems Part 6: Interface standards .Electricity dispenser .Token encoding format and physical token definition Electricity sales systems Part 6: Interface standards Section 9: Standard transfer specification/Numeric token technology .Token encoding format and physical token definition Electricity sales systems Part 7: Standard transfer specification/ The management of cryptographic keys Electricity sales sytems Part 8: The management of secure modules Pilot cables 1 1 1 1 1.01 NRS 009-6-7:2002 (NRS 009-6-7) 2.Credit dispensing unit Electricity sales systems Part 6: Interface standards Section 6: Standard transfer specification/Credit dispensing unit .Electricity dispenser .Standard token translator interface Electricity sales systems Part 6: Interface standards Section 3: System master station .02 NRS 009-6-8:1997 (NRS 009-6-8) 1 NRS 009-6-9:1997 (NRS 009-6-9) 1 NRS 009-7:1999 (NRS 009-7) NRS 009-8:2005 (NRS 009-8) NRS 011:2001 (NRS 011) 1 1 2 Page 338 .System master station . Preferred requirements for applications in their organizations by the dc and standby equipment representative user group Diesel alternator sets Part 2: Mobile or trailermounted diesel alternator sets .Preferred requirements for applications in their organizations by the DC and standby equipment representative user group Cable lugs and ferrules for copper and aluminium conductors Current transformers for rated a.01 Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 1: Strain and suspension fittings for self-supporting conductors Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 2: Strain and suspension fittings for insulated neutral supporting conductors Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 3: Strain and suspension fittings for bare neutral supporting conductors Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 4: Strain and suspension fittings for aerial service cables Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 5: Current-carrying connectors and joints Electricity distribution .Guidelines for the application design.01 3 1 NRS 024-2:1994 (NRS 024-2) 1 NRS 028:1993/IEC 61238-1:1993.Inductive voltage transformers for rated a. planning and construction of medium voltage overhead power lines up to and including 22 kV.Pole-mounted types For overhead single-phase a.c.c.Stays and associated components Diesel alternator sets Part 1: Diesel alternator sets for fixed installations .6 kV up to and including 145 kV for indoor and outdoor applications Alternating current disconnectors and earthing switches (up to 145 kV) Service distribution boxes . voltages from 3.Standards available in electronic format (PDF) October 2009 SANS Number NRS 013:2007 (NRS 013) NRS 018-1:2002 (NRS 018-1) Edition Title 3 Medium-voltage cables 1. voltages from 3. NEQ (NRS 028) NRS 029:2002 (NRS 029) NRS 030:2001 (NRS 030) 1 3 2 NRS 031:2008 (NRS 031) NRS 032:2001 (NRS 032) NRS 033:1996 (NRS 033) 3 2 1 Page 339 .c.Cable ties for use with low voltage aerial bundled conductors Electricity distribution . service connections at 230 V Electricity distribution .6 kV up to and including 420 kV (maximum voltage for equipment) Electricity distribution . using wooden pole structures and bare conductors NRS 018-2:1995 (NRS 018-2) 1 NRS 018-3:1995 (NRS 018-3) 1 NRS 018-4:1996 (NRS 018-4) 1 NRS 018-5:1996 (NRS 018-5) NRS 020:2002 (NRS 020) NRS 022:2008 (NRS 022) NRS 024-1:1994 (NRS 024-1) 1 2. equipment and conditions relating to the generation.Polemounted types . 2 (NRS 035-1) 2 NRS 035-2:2002/PIESA 002-2:2002.Guidelines for the provision of electrical distribution networks in residential areas Part 3: Overhead distribution in very low. 2 (NRS 035-2) NRS 036-1:2002 (NRS 036-1) 2 2 NRS 036-2:2004 (NRS 036-2) 2 NRS 036-3:2004 (NRS 036-3) NRS 037-1:2006 (NRS 037-1) NRS 037-3:2005 (NRS 037-3) NRS 038-1:2007 (NRS 038-1) NRS 038-2:2007 (NRS 038-2) NRS 039-1:2008 (NRS 039-1) NRS 039-2:2008 (NRS 039-2) NRS 040-1:1999 (NRS 040-1) 2 2 1 2 2 2 2 1. Ed.Guidelines for the provision of electrical distribution networks in residential areas Part 1: Planning and design of distribution systems Electricity distribution .01 Page 340 . transmission and distribution of electricity 3.Standards available in electronic format (PDF) October 2009 SANS Number NRS 034-0:2001 (NRS 034-0) NRS 034-1:2001 (NRS 034-1) NRS 034-2-3:1997 (NRS 034-2-3) Edition Title 1. NEQ. Ed.c.c. gapless metal-oxide surge arresters High-voltage operating regulations Part 1: Definitions . low and moderate consumption areas.For nominal a.Preferred definitions for systems. voltages up to and including 33 kV Outdoor distribution cut-outs Part 2: Expulsion fuselinks .Concrete poles Part 1: Concrete poles for LV and MV overhead distribution systems Electricity distribution .c.Guidelines for the provision of electrical distribution networks in residential areas Part 0: Definitions Electricity distribution .For nominal a.Pole-mounted types Part 3: Sectionalizers for nominal a.Concrete poles Part 2: Concrete poles for lighting applications Surge arresters for use in distribution systems Part 1: Guide for the application of gapless metal-oxide surge arresters Surge arresters for use in distribution systems Part 2: Distribution class.Pole mounted types Part 2: Auto-reclosers that have programmable protection features and local control for nominal a.02 Electricity distribution . voltages up to and including 33 kV Auto-reclosers and sectionalizers .03 1 NRS 034-3:1999 (NRS 034-3) 2 NRS 035-1:2002/PIESA 002-1:2002.Pole mounted types Part 1: Auto-reclosers with local and remote control capabilities for nominal a. including rural areas and informal settlements Outdoor distribution cut-outs Part 1: Drop-out fuselink assemblies or solid-link assemblies . voltages up to 33 kV Auto-reclosers and sectionalizers . NEQ. voltages up to 33 kV Telecontrol protocol Part 1: Telecontrol protocol for stand-alone remote terminal units Telecontrol protocol Part 3: Intercontrol centre communications protocol Electricity distribution .Guidelines for the provision of electrical distribution networks in residential areas Part 2-3: Preferred methods and materials for the installation of overhead power lines Electricity distribution . voltages of up to 33 kV Auto-reclosers and sectionalizers .c.c. compatibility levels.Quality of supply Part 2: Voltage characteristics. or the extension or modification of such existing works and facilities Electricity distribution .01 3 1.Quality of supply Part 4: Application practices for licencees Electricity supply .01 2 1 NRS 046:2002 (NRS 046) NRS 047-1:2005 (NRS 047-1) NRS 047-2:2001 (NRS 047-2) NRS 048-2:2007 (NRS 048-2) NRS 048-4:2009 (NRS 048-4) NRS 048-6:2009 1.Recommended model regulations relating to power systems for operating. transmission and distribution of electricity High-voltage operating regulations Part 3: Model regulations .Pole-mounted type for rated A.Colour coding for wall-mounted operating diagrams and electronic displays relating to the generation.02 3 2 1 NRS 048-8:2009 1 NRS 049:2008 (NRS 049) NRS 051:1999 (NRS 051) NRS 052-1:1999 (NRS 052-1) 1 1 1 Page 341 .Quality of service Part 2: Reporting guidelines Electricity supply . for the transmission and distribution of electricity High-voltage operating regulations Part 5: Standard procedure and terminology for the issuing of operating instructions High-voltage operating instructions Part 6: Code of practice for earthing Guide for the protection of electronic equipment against damaging transients Joint use of structures for power and telecommunication lines Working procedures and standards in respect of the installation of new electrical works and telecommunication facilities.C.Quality of service Part 1: Minimum standards Electricity supply .Standards available in electronic format (PDF) October 2009 SANS Number NRS 040-2:2000 (NRS 040-2) Edition Title 2 High-voltage operating regulations Part 2: Voltage colour coding for diagrammatic displays in control rooms .Quality of supply Part 6: Measurement and reporting of medium-voltage network interruption performance Electricity supply .Load-break switchdisconnectors . voltages above 1 kV and up to and including 36 kV Electricity supply . limits and assessment methods Electricity supply . access control and supervision of systems that exceed 1 000 V.Quality of supply Part 8: Measurement and reporting of extra high voltage (EHV) and high voltage (HV) network interruption performance Advanced Metering Infrastructure (AMI) for residential and commercial customers Suspension and strain fittings for insulated neutral supporting conductors used in medium-voltage aerial bundled conductor systems Photovoltaic systems for use in individual homes Part 1: Standard requirements applicable to individual homes remote from the electricity grid NRS 040-3:2002 (NRS 040-3) 2 NRS 040-5:2008 1 NRS 040-6:2009 1 NRS 042:2004 (NRS 042) NRS 043:2005 (NRS 043) NRS 044:2002 (NRS 044) 1. Meter kiosks and distribution kiosks Part 2: Specification for groundmounted.8/6.Meter kiosks and distribution kiosks Part 1: Low-voltage non-steel meter kiosks for use in underground networks Service distribution boxes . low-voltage distribution kiosks Recommendations to minimize problems associated with the theft of transformer neutral and neutral earthing copper conductors Code of practice for clearances for electrical systems with rated voltages up to and including 145 kV.01 2 1 1 1 1 1 Electricity distribution . for the safety of persons Specification for overhead ground wire with optical fibre Part 1: Product specification Specification for overhead ground wire with optical fibre Part 2: Installation guidelines Guidelines for the exchange of spatial information in the Electricity Supply Industry Medium-voltage insulators 1 1.Standards available in electronic format (PDF) October 2009 SANS Number NRS 052-2-1:1999 (NRS 052-2-1) NRS 052-2-2:1999 (NRS 052-2-2) NRS 052-2-3:1999 (NRS 052-2-3) NRS 052-2-4:1999 (NRS 052-2-4) NRS 052-2-5:1999 (NRS 052-2-5) NRS 053:2008 (NRS 053) NRS 054:2002 (NRS 054) NRS 055:2007 (NRS 055) NRS 056-1:2005 (NRS 056-1) NRS 056-2:2004 (NRS 056-2) NRS 059:2002 (NRS 059) NRS 060:2005 (NRS 060) NRS 061-1:2002 (NRS 061-1) NRS 061-2:2004 (NRS 061-2) NRS 064:2005 (NRS 064) NRS 066:2002 (NRS 066) NRS 068:2002 (NRS 068) NRS 069:2004 Edition Title 1 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 1: Test procedures for photovoltaic modules Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 2: Test procedures for batteries Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 3: Test procedures for regulators Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 4: Test procedures for inverters Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 5: Test procedures for luminaires Accessories for medium-voltage power cables (3.6 kV to 19/33 kV) Power transformers 1 1 1 1 2 1 2 Code of practice for revenue protection 1 Service distribution boxes .Cable earth fault indicator 1 Code of practice for the recovery of capital costs for distribution network assets Quality of service standard for non-grid electricity customers Overhead line fault path indicators NRS 070:2004 (NRS 070) NRS 072:2003 (NRS 072) 1 1 Page 342 . cross-arms and spacer blocks NRS 074-1:2005 (NRS 074-1) NRS 075:2004 (NRS 075) NRS 076:2005 (NRS 076) NRS 077:2005 (NRS 077) NRS 078-1:2004 (NRS 078-1) NRS 078-2:2005 (NRS 078-2) NRS 079-1:2004 (NRS 079-1) NRS 080:2004 (NRS 080) NRS 081:2005 (NRS 081) NRS 082:2004 (NRS 082) NRS 083-1:2007 2 Low-voltage (600/1 000 V) cable systems for underground electrical distribution Part 1: Cables Mechanical torque shear connectors 1 1 Earthing of distribution substations with nominal voltages up to and including 132 kV XLPE-insulated cables and accessories for systems with nominal voltages of 44 kV. 66 kV. 88 kV and 132 kV Long-span all-dielectric self-supporting fibre optic cables Part 1: Product specification Long-span all-dielectric self-supporting fibre optic cables Part 2: Installation guidelines Mineral insulating oils (uninhibited) Part 1: Purchase. management. maintenance and testing Quantifying and reporting of energy losses in electricity distribution networks Single-mode non-dispersion shifted optical fibres 1 1 1 1 1 1 1 Recommended maintenance policy for electricity networks Code of practice for the application of electromagnetic compatibility (EMC) standards and guidelines in electricity utility networks Part 1: Equipment standards Guidelines for the management of SF6 (sulfur hexafluoride) for use in electrical equipment Duct and direct-buried underground fibre-optic cable Part 1: Product specification Maintenance of electricity networks Part 5: Street lighting and high masts Section 1: Maintenance of street lighting and high masts Asset management of electricity infrastructure Part 1: Minimum requirements for asset management in the South African Electricity Distribution Industry Electricity metering .Standards available in electronic format (PDF) October 2009 SANS Number NRS 073:2008 Edition Title 1 Wood poles.Ancillary specifications Part 1: The sealing of electricity meters Guidelines for the installation and safe use of portable generators on utilities' networks NRS definitions Part 1: Compilation of NRS and other definitions used in the Electricity Supply Industry 1 NRS 087:2008 1 NRS 088-1:2007 1 NRS 089-5-1:2009 1 NRS 093-1:2009 1 NRS 096-1:2007 1 NRS 098:2009 1 NRS 000-1:2008 1 Page 343 . Metal-enclosed ring main units for rated A.C. Ed. 1. voltages up to and including 33 kV Outdoor distribution cut-outs Part 2: Expulsion fuselinks.c.C.Stays and associated components Switchgear .01 (PIESA 1010) PIESA 1012:2004/NRS 012:2002.Polemounted types. For nominal a. Ed. voltages above 1 kV and up to and including 24 kV Metal-clad switchgear for rated A.c.01 (PIESA 1009) PIESA 1010:2005/SANS 1885:2004. voltages up to and including 33 kV Low-voltage (600/1 000 V) cable systems for underground electrical distribution Part 1: Cables Low-voltage (600/1 000 V) cable systems for underground electrical distribution Part 2: Accessories Low-voltage (600/1 000 V) cable systems for underground electrical distribution Part 2: Code of practice Wood poles. cross-arms and spacer blocks PIESA 002-2:2002 1 PIESA 003-1:2001 1 PIESA 003-2:2002 1 PIESA 003-3:2002 1 PIESA 1001:2004 (PIESA 1001) PIESA 1004-1:2004 (PIESA 1004-1) PIESA 1004-2:2004 (PIESA 1004-2) PIESA 1004-3:2005 (PIESA 1004-3) PIESA 1006:2004 (PIESA 1006) PIESA 1007:2004 (PIESA 1007) PIESA 1009:2005/SANS 1874:2005. MOD.2 kV and up to and including 36 kV Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 2: Strain and suspension fittings for insulated neutral supporting conductors Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 3: Strain and suspension fittings for bare neutral support conductors Fittings and connectors for low voltage overhead power lines using aerial bundled conductors Part 4: Strain and suspension fittings for aerial service cables Fittings and connectors for low voltage overhead power lines using aerial bundled conductors Part 5: Current-carrying connectors and joints 1 1 1 1 1 1 1 PIESA 1018-2:2004 (PIESA 1018-2) 1 PIESA 1018-3:2004 (PIESA 1018-3) 1 PIESA 1018-4:2004 (PIESA 1018-4) 1 PIESA 1018-5:2004 (PIESA 1018-5) 1 Page 344 .c. Ed. MOD. MOD. voltages above 1 kV and up to and including 36 kV . 1 (PIESA 1012) 2 1 Low voltage (600/1 000 V) cable systems for overhead electrical distribution Part 1: Cables Low voltage (600/1 000 V) cable systems for overhead electrical distribution Part 2: Accessories Low voltage (600/1 000 V) cable systems for overhead electrical distribution Part 3: Application guide Distribution transformers of size up to and including 500 kVA and operating at nominal voltages not exceeding 33 kV Electricity distribution . For nominal a. voltages of 7.Standards available in electronic format (PDF) October 2009 SANS Number PIESA 002-1:2000 Edition Title 1 Outdoor distribution cut-outs Part 1: Drop-out fuselink assemblies or solid-link assemblies . 1.General requirements and methods of test Cable terminations and live conductors within airinsulated enclosures (insulation co-ordination) for rated a. c. canned marine molluscs and canned crustaceans Safety helmets for motor cyclists 2 3 Frozen fish. limits and assessment methods Split-concentric single-phase aerial service cable for domestic service connections with separate neutral and earth conductors Corrosion protection of new mild steel fabricated equipment Electricity payment systems . processing and treatment of canned meat products Frozen rock lobster and frozen lobster products derived therefrom Smoked snoek 3 3 1 7 Compulsory specification for motor vehicles of category M1 Compulsory specification for motor vehicles of category M2 and M3 5 Page 345 .Voltage characteristics.Quality of supply . production.Pole-mounted types for overhead single-phase a. socket-outlets and socket-outlet adaptors 3 Lampholders 3 Appliance couplers 2 Hydraulic brake and clutch fluid 3 The manufacture.Cable ties for use with lowvoltage aerial bundled conductors Service distribution boxes .Prepayment passive units Manually operated switches for fixed installations 1 1 PIESA 1063:2005 (PIESA 1063) PIESA 1102:2004 (PIESA 1102) PIESA 1106:2006 1 1 1 VC 8003:1998 (VC 8003) VC 8006:1995 (VC 8006) VC 8008:1998 (VC 8008) VC 8011:1999 (VC 8011) VC 8012:1998 (VC 8012) VC 8013:1975 (VC 8013) VC 8014:2004 (VC 8014) VC 8016:1984 (VC 8016) VC 8017:2003 (VC 8017) VC 8019:2004 (VC 8019) VC 8020:2003 (VC 8020) VC 8021:1974 (VC 8021) VC 8022:2008 (VC 8022) VC 8023:2005 (VC 8023) 2 3 Safety of flexible cords for electrical appliances 2 Plugs. processing and treatment of canned fish. production. compatibility levels. frozen marine molluscs and frozen products derived therefrom The manufacture.Standards available in electronic format (PDF) October 2009 SANS Number PIESA 1020:2004 (PIESA 1020) PIESA 1032:2004 (PIESA 1032) PIESA 1048:2008 Edition Title 1 Electricity distribution . service connections at 230 V Electricity supply . Standards available in electronic format (PDF) October 2009 SANS Number VC 8024:2008 (VC 8024) VC 8025:2005 (VC 8025) VC 8026:2004 (VC 8026) VC 8027:2008 (VC 8027) VC 8028:1976 (VC 8028) VC 8029:2005 (VC 8029) VC 8031:1987 (VC 8031) VC 8032:2009 (VC 8032) VC 8033:2003/ECE R44:1998. MOD. langoustines and crabs 2 Personal flotation aids 3 Child restraints for use in motor vehicles 1 Coal-burning stoves and heaters for use in a dwelling Earth leakage protection units 1 3 Circuit-breakers 1 The safety of starters for tubular fluorescent lamps 2 Microbiological safety cabinets (Classes I. II and III) 2 Incandescent lamps 1 Replacement incandescent lamps for motor vehicles 1 Replacement headlights for motor vehicles 1 Replacement secondary lights for motor vehicles 1 Replacement safety glass for use in road vehicles 1 Manually operated switches for appliances 2 Replacement brake lining assemblies for road vehicles Page 346 . Ed. 2 (VC 8033) VC 8034:1982 (VC 8034) VC 8035:1987 (VC 8035) VC 8036:2006 (VC 8036) VC 8039:1989 (VC 8039) VC 8041:2001 (VC 8041) VC 8043:2005 (VC 8043) VC 8048:1996 (VC 8048) VC 8049:1997 (VC 8049) VC 8050:1996 (VC 8050) VC 8051:1995 (VC 8051) VC 8052:1998 (VC 8052) VC 8053:2001 (VC 8053) Edition Title 6 Compulsory specification for motor vehicles of category N1 Compulsory specification for motor vehicles of category N2 and N3 Category O1 and O2 vehicles (caravans and light trailers) Compulsory specification for vehicles of category O3 and O4 Firearms for civil use 5 4 5 1 3 Cord sets and cord extension sets 1 Frozen shrimps (prawns). Standards available in electronic format (PDF) October 2009 SANS Number VC 8054:1999 (VC 8054) VC 8055:2009 (VC 8055) VC 8056:2001 (VC 8056) VC 8057:2004 (VC 8057) VC 8059:2001 (VC 8059) VC 8062:1998 (VC 8062) VC 8065:2002 (VC 8065) VC 8072:2003 (VC 8072) VC 8073:2003 (VC 8073) VC 8075:2003 (VC 8075) VC 8076:2002 (VC 8076) VC 8077:2003 (VC 8077) VC 8078:2003 (VC 8078) VC 8079:2003 (VC 8079) VC 8080:2005 (VC 8080) Edition Title 1 Disinfectants and detergent-disinfectants 2 Electrical and electronic apparatus 2 Compulsory specification for pneumatic tyres for passenger cars and trailers Agricultural tractors 2 2 Compulsory specification for pneumatic tyres for commercial vehicles and their trailers Retro-reflective number plates for motor vehicles 1 1 Ball type couplings and towing brackets for towing caravans and light trailers Compulsory specification for respirators 1 1 Breathing apparatus 2 Compulsory specification for the safety of electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Compulsory specification for the safety of lighters 1 1 Safety of medium-voltage electric cables 1 Compulsory specification for material for contour marking on motor vehicles Compulsory specification for the control of gaming devices and related apparatus Replacement elastomeric cups and seals for hydraulic brake actuating cylinders for use in motor vehicles using non-petroleum base hydraulic brake fluid (service temperature 70 °C to 150 °C max) Compulsory specification for plastic carrier bags and flat bags Compulsory specification for cement 1 1 VC 8087:2003 (VC 8087) VC 9085:2007 1 1 VC 9087:2009 Compulsory specification for lamp controlgear VC 9088:2004 (VC 9088) VC 9089:2006 1 Compulsory specification for small arms shooting ranges Compulsory specification for non-pressure paraffin stoves and heaters 1 Page 347 . Standards available in electronic format (PDF) October 2009 SANS Number VC 9090:2009 Edition Title 1 Compulsory specification for swimming aids VC 9101:2009 1 Preservative treatment of timber US-ERGB:2008 1 US Emergency Response Guide Book Page 348 .
Copyright © 2024 DOKUMEN.SITE Inc.