Renold Conveyor Chains

IndiaCoimbatore Tel: + 61 (0) 3 9262 3333 Fax: + 61 (0) 3 9561 8561 e-mail: [email protected] Tel: +91 - 422 4226800 Fax: +91 - 422 2532358 e-mail: [email protected] also at: Sydney, Brisbane, Adelaide, Perth, Newcastle, Wollongong, Townsville Austria Vienna Tel: + 43 (0) 1 330 3484 Fax: + 43 (0) 1 330 3484-5 e-mail: [email protected] Malaysia Selangor Darul Ehsan Tel: + 60 3-5122 7880 Fax: + 60 3-5122 7881 e-mail: [email protected] Singapore Tel: + 65 6760 2422 Fax: + 65 6760 1507 e-mail: [email protected] Conveyor Chain Australia Melbourne (Victoria) South Africa Benoni (Johannesburg) Tel: + 27 11 747 9500 Fax: + 27 11 747 9505 e-mail: [email protected] also at: Johor Bharu, Ipoh, Penang also at: Richards Bay, Port Elizabeth, Cape Town Netherlands Amsterdam Spain Gavá (Barcelona) Tel: + 31 (0) 20 6146661 Fax: + 31 (0) 20 6146391 e-mail: [email protected] Tel: + 34 93 638 9641 Fax: + 34 93 638 0737 e-mail: [email protected] New Zealand Auckland Switzerland Dübendorf (Zürich) Tel: + 64 9828 5018 Fax: + 64 9828 5019 e-mail: [email protected] Tel: + 41 (0) 44 824 8484 Fax: + 41 (0) 44 824 8411 e-mail: [email protected] Canada Montreal (Quebec) also at: Christchurch also at: Crissier (Lausanne) Tel: + 1 514 367 1764 Fax: + 1 514 367 4993 e-mail: [email protected] Philippines Paranaque City UK Burton upon Trent Tel: + 63 2 829 6086 Fax: + 63 2 826 5211 Tel: + 44 (0) 1283 512940 Fax: + 44 (0) 1283 512628 e-mail: [email protected] also at: Budapest (Hungary), Tel: + 36 30 228 3269 Fax: + 36 1 287 8087 e-mail: [email protected] Belgium Gent Tel: + 32 (0) 9 242 95 50 Fax: + 32 (0) 9 242 95 59 e-mail: [email protected] China Shanghai Tel: + 21 5046 2696 Fax: + 21 5046 2695 e-mail: [email protected] Conveyor chain Poland Tel: + 48 663 842 487 e-mail: [email protected] USA Morristown TN Tel: + 1 800 251 9012 Fax: + 1 423 581 2399 e-mail: [email protected] Czech Republic Zlin Romania Motca Tel: + 420 606 727 811 Fax: + 420 577 240 324 e-mail: [email protected] Tel: + 4 0726 69 56 52 Fax: + 4 0232 76 56 52 e-mail: [email protected] France Seclin Russia Moscow Whilst all reasonable care is taken in compiling the information contained in this brochure, no responsibility is accepted for printing errors. Tel: + 33 (0) 320 16 29 29 Fax: + 33 (0) 320 16 29 00 e-mail: [email protected] Tel: + 7 495 645 2250 Fax: + 7 495 645 2251 e-mail: [email protected] All information contained in this brochure is subject to change after the date of publication. Germany Einbeck Scandinavia Hvidovre (Copenhagen) Tel: + 49 (0) 5562 810 Fax: + 49 (0) 5562 81130 e-mail: [email protected] Tel: + 45 43 45 26 11 Fax: + 45 43 45 65 92 e-mail: [email protected] For other country distributors please consult www.renold.com. © Renold Power Transmission 2010. Ref: REN2 / ENG / 10.10 www.renold.com www.renold.com 2 I Renold Conveyor Chain Catalogue Renold Conveyor Chain Catalogue I 79 Renold Chain Product Range Roller Chain • British, ANSI, API, DIN, ISO and Works Standard Chains • Adapted Chains • Extended Pitch Chains • Hollow Pin Chains • Made to Order, Special Chains • Mini Pitch Chains • • • • • • • Nickel Plated Chains Oilfield Chains Plastic Bush Chains Power and Free Chains Polymer Block Chains Side Bow Chains Stainless Steel Chains Applications • Abattoirs • Air Conditioning • Aircraft - Civil & Military • Bakery Machines • Battery Manufacturing • Brewing • Canning • Carpet Machines • Chart Tables/Marine • Chocolate Manufacturing • Concrete Moulding Equipment • Copying Machines • Dairy Machinery • Drying Machinery • Earth Moving Equipment • Extrusion Machines • Filtration Plants • Food & Drink Manufacture • Glass Manufacture • Health Care Equipment • Hydraulic Components • Ice-Cream Manufacture • In-flight Refueling • Ingot Casting & Scrap Metal Processing • Latex Machinery • Laundry Machinery • Lawnmower Manufacture • Mill Machinery • Mining • MOT Brake Testing Machinery • Nuclear Power • Off Road Vehicles • Oil Industry • Packaging Machines • Paper & Card Making • Paper Shredders • Plastic Machinery • Potato Grading Machinery • Power Generation • Printing Machines • Quarry Plant • Road Making & Plant Machinery • Robotic Systems • Roof Tile Manufacture • Ship's Engines • Silkscreen Machinery • Ski-Lifts • Soot Blowers • Steel Making • Straddle Carriers • Sugar Beet Machines • Sun-Blinds • Telecommunications • Textile Machinery • Timber and Woodworking Machines • Tin Printer Ovens • Tobacco/Cigarette Machinery • Tunnelling Machines • T.V. and Audio Equipment • Tyre Manufacture • Waste Handling • X-Ray Equipment Conveyor Chain • British, ISO and Works Standard Chains • Adapted Chains • Agricultural Chains • Bakery Chains • Deep Link Chains • • • • • Escalator Chains Made to Order, Specials Stainless Steel Chains Sugar Cane Chains Zinc Plated Chains Applications • Abattoirs • Agricultural Machines • Bakery Machines • Bottle Washing Plants • Brick & Tile Machinery OEM • Car Plants • Cement Plants • Chemical Plants • Chicken Process Equipment • Cigarette/Tobacco Machinery • Dust Filters • Egg Sorting Conveyors • Electrical Switchgears • Escalators • Extrusion Machines • Feed Mill Machines • Feed Silo Equipment • Fibreglass Industry • Filtration Plants • Fish Conveyor • Food Sterilisation • Food Processing • Freezing Equipment • Freezing Tunnels • Glass Manufacturing • Grain Conveyor • Harvesting Machines • Ice Cream Machines • Induction Furnaces • Ingot Casting & Scrap Metal Processing Mfr • Latex Machinery • Leisure Rides • Luggage & Parcel Handling • Machine Tools • Mail Sorting • Metal Casting • Mushroom Compost Machinery • Nuclear • Ovens/Provers • Potato Grading Machinery • Potting Machinery • Quarries • Radio Astronomy • Roof Tile Manufacture • Rope Machinery • Saw Mill Equipment • Sewage Plants • Shaker Conveyors • Ski-Lifts • Sluice Gates • Steel Making • Sugar Factories • Swarf Conveyors • Textile Machinery • Timber & Woodworking Machines • Tool Changer • Tunnelling Machines • Tyre Manufacture • Washing & Sterilising Machines • Water Treatment • Wire Belts Lifting Chain • LH(BL), AL, LL and Works Standard Chains Applications • Bottle Washing Plants • Cement Plants • Chemical • Counterbalance Sets • Cranes • Dust/Swarf Conveyors • Elevators • Food Processing • Food Sterilisation • Fork Lift Trucks • Pipe Line Valves/Taps • Printing Machines • Rock Drilling • Straddle Carriers • Sun-Blinds • Tail Lifts Safety warning Health and Safety at work Guidance notes Outer Link: for high speed drives or drives operating in arduous conditions a properly riveted outer link (No 107) must always be used for optimum security, in preference to any other form of chain joint. The use of other connectors and cranked links (No 12 and No 30) must always be restricted to light duty, noncritical applications, in drives where an odd number of pitches is absolutely unavoidable. Wherever possible, drives should have sufficient overall adjustment to ensure the use of an even number of pitches throughout the useful life of the chain. A cranked link joint should only be used as a last resort. In the interests of safety, customers are reminded that when purchasing any technical product for use at work (or otherwise), any additional or up-to-date information and guidance, which it has not been possible to include in the publication, should be obtained by you from your local sales office in relation to the suitability and the safe and proper use of the product. All relevant information and guidance must be passed on by you to the person engaged in, or likely to be affected by or responsible for the use of the product. Whilst all reasonable care in compiling the information contained in this catalogue is taken, no responsibility is accepted for errors. All information contained in this catalogue is subject to change without notice. Chain performance The performance levels and tolerances of our product stated in this catalogue (including without limitation, serviceability, wear life, resistance to fatigue, corrosion protection) have been verified in a programme of testing and quality control in accordance with Renold, independent and/or international standard recommendations. No representations or warranties are given that our product shall meet the stated performance levels or tolerances for any given application outside the performance levels and tolerances for the product’s own specific application and environment. Illustrations - The illustrations used in this catalogue represent the type of product described but the goods supplied may vary in some detail from those illustrated. Specifications - The right is reserved to make modifications to the product to meet manufacturing conditions and/or developments (for example in design or materials). Renold - Product can be supplied by Renold companies or representatives around the world on the standard terms and conditions of sale of the company or representative from which the product is purchased. Copyright - Copyright Renold Power Transmission Limited 2010. All rights reserved. Nothing contained in this publication shall constitute a part of any contract, express or implied. Renold Conveyor Chain Catalogue I3 Table of Contents Section 1 - Conveyor Products and Dimensions Section 2 - Conveyor Sprocket Details Conveyor chain introduction 5-7 3000 lbf, 13000 Newton sprockets 49 BS conveyor chain dimensions 8-9 4500 lbf, 20000 Newton sprockets 50 BS rollers and connecting links 10 6000 lbf, 27000 Newton sprockets 50 11-12 7500 lbf, 33000 Newton sprockets 50 13 12000 lbf, 54000 Newton sprockets 51 14-20 15000 lbf, 67000 Newton sprockets 51 Extra strength conveyor chain Extra strength rollers and connecting links BS attachments BS spigot pins 21 24000 lbf 107000 Newton sprockets 51 BS outboard rollers 22 30000 lbf, 134000 Newton sprockets 51 ISO conveyor chain 23-27 ISO rollers 28 Section 3 - Industrial Applications ISO connecting links 29 and Special Engineered Chain ISO attachments 30-34 Bucket Elevator chain 35-41 Welded Steel chain 42-43 Agricultural chain 44 Agricultural chain attachments 45 Agricultural chain - standard sprockets Examples of some specialist industries that benefit from Renold Conveyor Chain 53-77 46-47 Pitch/Inside width chart This simple guide is designed to help quickly locate your chain in the catalogue. By measuring the pitch and the inside width of the chain, the page number can be found. This chart covers all the popular sizes, for further info please consult Renold. Inside width - dimensions in mm Pitch Inch Pitch mm 1.000 11.70 12.70 15.00 15.90 19.00 19.10 19.81 20.00 22.23 24.00 25.40 28.00 28.60 32.00 37.00 38.10 43.00 48.00 56.00 63.50 66.00 76.20 78.00 8 1.150 44 Inside width 1.375 44 1.500 8 8,11,36 44 1.630 44 44 1.650 44 2.000 Pitch 8,11,36 2.297 44 63 23,39 23,39 2.609 44 80 3.500 23 23,39 23,39 8,11,36 100 23 23,39 125 5.000 23,39 8,36 6.000 8,36 160 35 23 35 35 250 35 23,39 7.000 200 94.456 94.463 95.25 101.60 35 23,39 23,39 23,39 35 35 4 I Renold Conveyor Chain Catalogue Section 1 Conveyor Products & Dimensions • Specially formulated lubricants reduce initial wear. • Correct chain selection is essential for optimum performance. In order to ensure this is translated into product performance. and greatly reduces the possibility of chain seizure in dusty/abrasive environments. Section 1 Renold Ultimate Performance . • Maximum chain strength and resistance to wear are achieved by strict control of the material specification and by using state of the art heat treatment processes. Renold’s experienced design team are always available to freely advise on particular products and applications. • The consistent overall tolerances of Renold chain make it ideal for conveying systems requiring precise alignment on multistrand chain layouts. provide corrosion protection and long storage life. Renold Ultimate Reliability • The key to Renold chain reliability is consistency in design and manufacture. lower friction. Fatigue life is improved by maintaining precise fits and tolerances between the pins. • Breaking loads exceed the minimum international standards.Renold Conveyor Chain Catalogue I5 Conveyor Chain Renold Ultimate Specification Renold Ultimate Performance • The performance of Renold Conveyor Chain is ensured by a programme of continuous testing and quality control of component dimensions. reduced wear and a reduction in noise levels during operation. ensuring effective lubricant penetration to the bearing surfaces. allows space for lubricant penetration. Chain and sprocket life are optimised by the rigid control of pitch accuracy. The Renold specification has taken many years in design and development to achieve the optimum product. bushes and side plates. we strictly control: • • • • • • Materials Heat Treatment Processes Fits Attachment Assembly Lubrication Exact control of bush projection through the chain side plate maintains precise clearances between the chain’s inner and outer links. fits and material properties. Down time in hostile environments is minimised by strict control of inner and outer plate clearances. Bush and roller life are maximised by controlling the concentricity of these components and careful selection and control of the heat treatment process. This feature reduces the risk of wear during operation. resulting in excellent gearing. can be used on certain applications. Bolted attachments should only span the outer link. with a choice of size and material. INTERNATIONAL STANDARDS Conveyor chain. When required. The bearing pin and bush are case-hardened to allow articulation under high pressures. Rollers of the plain or flanged type. thus providing a continuous carrying edge above the roller periphery. In general. This standard has a wide acceptance in the European market. The main standards available are: BRITISH STANDARD . HOLLOW BEARING PIN CHAIN CHAIN ROLLERS Hollow bearing pin type chain affords ready facility for fixing attachments to outer links by bolting through the hollow bearing pins and is suitable for use in all normal conditions. Deep Link chain has sideplates with a greater depth than the normal chain plates. chain without rollers. the use of chain incorporating rollers is recommended.6 I Renold Conveyor Chain Catalogue Conveyor Chain Details Section 1 Conveyor Chain Types Precision conveyor chain. for each strength of conveyor chain. as a bolted attachment spanning the inner link would impair the free articulation of the chain.BS DEEP LINK CHAIN This standard covers chain manufactured to suit the British market and markets where a strong British presence has dominated engineering design and purchasing. The standard is based on the original Renold Conveyor Chain design. the minimum pitch being governed by the need for adequate wheel tooth strength. i. coned bearing pins are employed. inside width and roller diameter as the equivalent hollow bearing pin chain. can be manufactured to a number of different international standards. but bush chain. There is. except in Germany. and to contend with the load carrying pressure and gearing action imparted via the chain rollers. like transmission chain. a range of pitches. are listed for most chain series . while having exactly the same gearing dimensions. like transmission chain. pitch. ISO STANDARD SOLID BEARING PIN CHAIN Chain manufactured to ISO Standard is not interchangeable with BS or DIN Standard Chain. and suitable gaps to clear the bushes must be provided in the wheel teeth. When lateral flexing of the chain is required to negotiate horizontal bend radii. Available in Hollow or Solid Pin versions. is more robust and is recommended for use where arduous conditions may be encountered. consists of a series of journal bearings held in precise relationship to each other by constraining link plates. the maximum pitch being normally dictated by plate and general chain rigidity. i. HOLLOW BEARING PIN CHAIN SOLID BEARING PIN CHAIN DEEP LINK CHAIN CHAIN ROLLERS . Solid bearing pin chain.e.e. Each bearing consists of a bearing pin and bush on which the chain roller revolves.size and material being dependent upon the type of application. The attachments may be bolted up tight or held in the hollow bearing pin in a “free” manner. Chain manufactured to this standard is becoming more popular and is used extensively in the Scandinavian region. the normal maximum pitch can be exceeded by the use of strengthening bushes between the link plates. Outboard rollers have two principal advantages. Consult Renold Chain for details.Renold Conveyor Chain Catalogue I7 Standard attachments are parts fitted to a base chain to adapt it for a particular purpose as a conveying medium. Other attachments (according to type) are fixed to the chain plates by projection or fillet welding.Welded Spigot Pin through Hollow Bearing Pin F2 .Integral K1 . Normally they have one or two holes (L2 preferred).Integral LO . etc. CONSULT RENOLD CHAIN.Welded L Attachments are integral with the chain outer plates. The holes in the inner plates are countersunk on the inside face to prevent the bolt heads fouling the sprocket teeth. Standard attachments are described below: F Attachments Outer or Inner Links Section 1 Standard Attachments Spigot Pins F1 . they can be replaced easily without recourse to chain replacement. Outboard Rollers For use on Hollow Bearing Pin Chain Single holing is primarily for use with spigot pins and is required on both sides of the chain. K Attachments Outer or Inner Links Spigot Pin through Link Plates F Attachments provide a flat surface at right angles to the chain plate. Attachments may form an integral part of the link plate or may be built into the chain as a replacement of the normal link.Integral Double Holed Link Plate K3 . can be supplied hard.Integral Single Holed Link Plate L2 . Double holing is provided for the assembly of special attachments on one or both sides of the chain. one side of the chain. buckets etc. Extended Bearing Pins K Attachments provide a platform parallel to the chain line and bearing pin axis. to either one or both sides of the chain. Spigot pins may be assembled either through hollow bearing pins or link plates and are secured by a nut and spring washer. but wherever possible. They are particularly useful when attachments prevent the gearing rollers running on support tracks on the return run or where the roller loading is high. Standard Sprockets A modified rim section is required when G or inverted F2 attachments are fitted to inner links. FOR ATTACHMENT SIZES AND ATTACHMENTS OTHER THAN THOSE SHOWN. L Attachments Holed Link Plates K1 . to the chain. scrapers. They are used for securing pushers. solid or drilled and are similar to the spigot pin arrangement. standard attachments used on our preferred range of chains shown earlier will give price and delivery advantages. as direct load carriers they enable the chain rollers to be used solely for gearing purposes and in the event of outboard roller wear. • The figure stands for the number of holes within each attachment type. scraper bars. Extended bearing pins. . They are used for securing slats. but for use on scraper applications they can be supplied without holes and with various box widths (LO Type).Welded • The letter stands for the attachment type. soft.Welded K2 . Special attachments can be manufactured. 8 1.8 25.0 18.1 11.0 45.1 38. Technical Details (mm) Breaking Load B.0 26.3 3.8 2.2 12.9 127.4 32.0 19.1 43.0 59.1 43.0 80.5 - 10.8 23.0 61.9 29.8 90000 400000 8S400 6.5 14.7 15.1 8.0 88.0 32.0 45.1 30000 45000 60000 134000 200000 267000 5S134 6S200 7S267 3.0 26.9 31.8 I Renold Conveyor Chain Catalogue Standard Conveyor Chain Section 1 BS 4116 Part 4 Deep link Hollow bearing pins Chain Ref.0 - 5.5 5.4 228.1 20.4 38.2 38.6 7.0 6.0 18.0 26.8 457.2 33.6 7.0 59.8 3.0 4.5 5.0 152.4 94.4 38. and spare links.1 7.22.0 82.0 17.0 19.0 12.8 38.7 14.8 5. see pages 9 and 10.4 32.1 38.0 46.5 2.9 8.0 32.4 304. .9 31.0 51.8 57.8 76.8 5.0 63.0 25.0 - 5.1 23.5 9.0 16.0 9.8 The dimensions listed will not vary with pitch size for each given breaking load.5 6.6 38.0 19.1 8.0 18.6 - 11.4 38.5 1.0 38.6 10.1 7.9 127.7 34.0 12.2 457.2 152.6 18.8 114.0 3.1 11.0 23.0 24.0 9.0 18.9 29.0 1. rollers.1 24000 36000 107000 160000 5H107 6H160 3.3 29.1 - 38.1 18.0 152.5 51.5 5.0 79.8 457.5 2.0 19.0 25.1 66.0 19.8 3.4 38.0 35.0 304.4 38.1 50.3 152.8 3.0 22.6 8.1 - 25.0 88.8 3.2 38.1 25.4 228.1 26.6 6.4 609.0 1.4 15.0 23.8 3.0 13.0 60.1 16.0 21.1 50.8 A A A A B C D E F G H1 H2 J K L Solid Bearing Pin 3000 7500 15000 13000 33000 67000 1S013 3S033 4S067 1.0 24.7 34.0 61.0 1.1 13.2 33.8 34.6 36.S Series Ref lb/f (Newtons) MIN MIN Solid bearing pins Deep link Pitch Inch Pitch Inch Pitch mm Pitch mm Bush Diam Hollow Bearing Pin Bore Diam Inside Width Inner Inside Width Outer Pin Diam Pin Length Plate Height Height Width Width Outer Inner Head MIN MAX MIN MAX MIN MIN MIN MIN MAX MAX A A A A B C D E F G H1 H2 J K L MAX Hollow Bearing Pin 4500 6000 12000 20000 27000 54000 2H020 3H027 4H054 1.7 15.1 25.1 38.6 12.0 61. For the details of individual pitch sizes.6 7.0 25.0 6.0 59. For attachments see pages 14 .5 44.0 22.4 15. 27000 Newtons Breaking Load .Hollow Pin 2.0 152.15 1.45 3.22 5.14 7500 lbf.Solid Pin 5.46 4.0 2.33 1.96 6.Solid Pin 1.2 105203/12 105243/12 105283/12 105303/12 105323/12 105363/12 105483/12 105603/12 105723/12 24.29 12000 lbf.38 21.28 7.64 6.15 21.43 AVAILABLE ON REQUEST 90000 lbf.2 228.30 6.39 4.28 1.0 457.89 4.3 140048/12 140068/56 140088/56 140108/56 140128/56 140148/56 140168/56 140188/56 1.98 20.27 3.2 609.0 152.0 457.0 2.46 1.52 AVAILABLE ON REQUEST 60000 lbf.22 1.0 6.15 5.5 203.5 2.0 152.45 13.0 7.4 177. 200000 Newtons Breaking Load .88 2. 13000 Newtons Breaking Load .62 6.0 4.83 16.0 152. amend the roller suffix for identification purposes when ordering .31 9.59 7.52 1.0 3.0 4.37 6.6 304.8 381.0 152.0 2.8 145162/12** 145202/12 145242/12** 145282/12 145322/12 145362/12 145482/12 14.0 6.19 2.3 127.27 11.4 177.0 8.8 76.93 6.86 13.95 3. consult Conveyor Chain Designer Guide 16.0 12.8 190.65 4.90 7.57 5.60 11.54 3.0 9.0 152.0 1.4 145060/03* 145080/12** 145100/12 145120/12** 145140/12 145160/12** 145180/12 145200/12 145240/12* 3.6 304.0 7.87 20.36 3.9 101.0 152.0 4.4 177.94 3.62 2. 400000 Newtons Breaking Load .08 10.0 8.4 177.30 4.5 5.0 15.18 38.0 9.0 12.0 15.97 4.0 15.21 107081/03 107121/12 107141/12 107161/12 107181/12 107201/12 107241/12 107281/12 107321/12 107361/12 6.3 127.Hollow Pin 5. 107000 Newtons Breaking Load .1 50.8 105162/12** 105202/12 105242/12** 105282/12 105322/12 105362/12 105482/12 12.8 63.0 18.5 4.36 20.26 12.4 177.0 152.18 19.0 6.Hollow Pin 1.5 Pitch Inch 101.Solid Pin 6000 lbf.40 11.5 8.01 Section 1 BS4116 Part 4 .6 127.15 18. For Roller Selection procedure.5 2. Where alternative rollers are required.0 152.8 63.14 167162/12 167202/12 167242/12 167282/12 167322/12 167362/12 167482/12 36000 lbf.8 76.2 228.85 6.8 203.52 4.18 20.0 12.67 2.42 10.0 457.5 8.0 24.89 3.0 2. 54000 Newtons Breaking Load .27 4.4 105060/03* 105080/12** 105100/12 105120/12** 105140/12 105160/12** 105180/12 105200/12 105240/12** 2.0 9.5 3.5 5.8 63.09 23.16 8.50 5.92 8.0 12.9 101.6 304.0 3.91 9.6 304. ** Preferred sizes of chain with standard sprockets and attachments available.2 228.5 4.8 203.2 88.42 9.0 5.2 228.90 7.19 AVAILABLE ON REQUEST This table indicates standard roller chain configurations.5 3.8 203.02 4.70 1.78 17.28 5.0 3.5 2.0 4.6 114.03 1.0 8. 67000 Newtons Breaking Load .9 101.52 15.10 15000 lbf.0 9.14 3.8 63.see page 10.5 5.4 177.65 1.0 6.0 38.50 6.0 4.17 14.97 22.0 18.0 18.68 17.49 3.0 6.2 145203/12 145243/12 145283/12 145303/12 145323/12 145363/12 145483/12 145603/12 145723/12 27.31 8.19 13.2 88.80 5.0 3.Renold Conveyor Chain Catalogue I9 Standard and Deep Link Chain Pitch Inch Pitch mm Roller Chain No Standard Mass Roller Chain No Deep link kg/m Mass 25.37 1.74 11.18 12. 160000 Newtons Breaking Load .40 18.0 15.13 2.00 1.Hollow Pin 4500 lbf.79 12.0 4.0 8.46 1.0 7.0 127.Solid Pin 1.0 9.77 1.0 18.6 304.60 4.80 2.47 13.34 14.52 30000 lbf.0 3.1 50.58 13.4 38.49 3.2 228.18 10.0 6.0 7.96 18.5 4.Solid Pin 7.23 6. Roller Chain No Deep link kg/m 4.34 24.5 203.9 101.66 16.57 2.2 228.0 127.Solid Pin 2.0 NOT AVAILABLE 107060/03 107080/12 107100/12 107120/12 107140/12 107160/12 107180/12 107200/12 107240/12 Mass Mass kg/m 101.0 50.0 7.86 AVAILABLE ON REQUEST 45000 lbf.0 9.0 6.25 7.65 107162/12 107202/12 107242/12 107282/12 107322/12 107362/12 107482/12 14.24 4.5 76.80 5.5 3.5 76.64 19.71 3.46 8.6 105081/03* 105121/12** 105141/12 105161/12** 105181/12 105201/12 105241/12** 105281/12 105321/12 105361/12 5.8 190.50 7.1 50.8 381.6 114.5 5.22 12.3 127.0 12.39 2.3 127.43 6.0 Pitch mm kg/m 3000 lbf.8 381.0 3.04 14.0 12. 33000 Newtons Breaking Load .5 2.97 2.95 38.0 5.63 3.8 203. 20000 Newtons Breaking Load .6 145247/12 145367/12 145487/12 145607/12 145727/12 145967/12 29. 134000 Newtons Breaking Load .50 3.2 88.2 88.8 203.5 76.4 177.4 228.6 145081/03* 145121/12** 145141/12 145161/12** 145181/12 145201/12 145241/12** 145281/12 145321/12 145361/12 6.06 1.91 11. 267000 Newtons Breaking Load .83 3.33 6.58 2.71 2.2 198028** 198030** 198033** 198039** 2.34 167048/12 167068/56 167088/56 167108/56 167128/56 167148/56 167168/56 167188/56 1.95 6.62 4.63 16.2 228.6 304.0 8.86 10.03 5.6 127.10 3.5 4.8 381.0 6.6 114.5 3.Solid Pin 6.6 114.0 9.0 7.Hollow Pin 1.5 4.91 5.0 7.90 4.0 7.6 114.54 5.9 101.0 50.50 18.72 5.00 0.47 2.21 10.0 3.0 Roller Chain No Standard 24000 lbf.44 167081/03 167121/12 167141/12 167161/12 167181/12 167201/12 167241/12 167271/12 167321/12 167361/12 * Bush chain only.0 7.1 50.5 76.0 152.66 9.0 9.28 1.42 167060/03 167080/12 167100/12 167120/12 167140/12 167160/12 167180/12 167200/12 167240/12 4.56 3.35 5.2 145245/12 145285/12 145325/12 145365/12 145485/12 145605/12 145725/12 23.0 457.2 88. 0 41.4 25.0 5.0 30.3 22.6 127.0 127.5 39.5 88.1 /21 /22 /21 /22 /21 /22 /22 /22 /22 Flanged 38.0 47.1 38.0 152.4 152.0 11.0 11.8 36.0 68.7 114. Plain roller Flanged roller Rollers Solid Pin Hollow Pin lbf Newtons lbf Newtons Standard roller breaking load 27000 54000 107000 160000 - 6000 12000 24000 36000 - Pitch mm MIN MIN Tread Diam Roller Width Rollers Available Standard plain 3000 7500 15000 30000 45000 60000 90000 13000 33000 67000 134000 200000 267000 400000 Large roller 4500 36000 - Pitch Inch 1.4 127.6 228.0 - 13.2 101.0 36.0 5.7 88.5 3.0 127.1 31.0 17.0 - 13.4 50.0 19.0 2.9 41.8 36.0 36.4 36.8 36.8 - 13.0 23.8 24.5 6.9 88.4 152.7 88.0 6.8 - 11.0 8.8 - 11.8 /12 /12 /12 /12 /12 /12 /12 2.0 41.5 8.9 88.0 127.8 M2 P2 W 127.0 22.0 28.0 17.0 19.0 152.3 114.6 /62 /62 /62 Roller selection details .4 165.8 76.8 36.0 4.4 152.0 Pitch mm MIN MIN Diam Tread Diam Flange Width M1 P1 W 31.8 24.8 47.6 66.8 47.2 203.10 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 Rollers and Connecting Links Rollers /12 STANDARD ROLLER (/12 Case Hardened Steel) /21 STANDARD FLANGED ROLLERS (Mild Steel) /52 & /56 LARGE ROLLERS (/52 Case Hardened Steel.8 M2 W 25.9 11.0 9.0 47.3 60.3 14.5 4.3 18.0 30.0 30.4 36. Connecting links R RENOLD A B No 107 Riveting link one side no 58 Soft circlip link no 11 Spring clip link both sides no 69 Link with self locking nuts Chain Breaking Load lbf 4500 6000 12000 24000 36000 - Newtons 20000 27000 54000 107000 160000 - Dimensions A & B are maximum sizes.0 23.0 40.4 3000 45000 60000 90000 13000 200000 267000 400000 1.2 /56 /52 /52 /52 9.8 Roller Available Standard flanged M1 W 12.0 8.0 19.0 40.0 6.0 62.see page 73.0 127.9 88.6 228.8 36. No 58 Chain Centre to No 107 Solid Pin Hollow Pin lbf 3000 7500 15000 30000 45000 60000 90000 Newtons 13000 33000 67000 134000 200000 267000 400000 No 11 Chain Centre to No 69 Chain Centre to Hollow Pin Both Solid Pin Both Plain Side Fastener Side Plain Side Fastener Side Plain Side Fastener Side A&B A&B A B A B A B 12.0 3.0 56.0 23.4 11.0 25.8 36.8 36.3 114.0 .5 1.1 203.0 228.0 9.0 127.0 17.3 152.0 46.0 25.0 6.9 114. /56 Sintered Hardened) /22 STANDARD FLANGED ROLLERS (Case Hardened Steel) /62 LARGE FLANGED ROLLERS (Case Hardened Steel) /41/42 FLUSH GEARING ROLLERS (available on request).5 Plain 20000 160000 - Pitch Inch 63.2 203.4 14.8 36.3 85.9 88.0 36.6 66. 22.0 9.1 29.0 22.0 25.6 304.1 15.0 3.0 26.8 3. .1 50.0 12. Each chain is the same dimensionally as its normal counterpart.7 The dimensions listed will not vary with pitch size for each given breaking load. Contact our technical sales staff for selection and applicational details. see pages 12 and 13.0 25.4 32.8 88. Extra strength chains are based on the standard chain shown on page 8. HOLLOW PIN SOLID PIN This chain is used extensively in the conveying of animal feed and bulk food stuffs such as grain.8 18.0 19.4 228.8 88.4 32.8 18.8 3.4 38.2 10.1 50.1 7.6 304.4 25.0 46. this extra strength chain is more suitable for conveyor applications selected on ultimate tensile strength (breaking load).5 43.0 23.0 60. rollers.0 3. maize.0 14.0 12.9 38.0 57.1 51.Renold Conveyor Chain Catalogue I 11 Extra Strength Standard Conveyor Chain Section 1 BS 4116 Part 4 Product Description To complement our standard range of British Standard Conveyor Chain.2 20.0 5.0 38.5 6.0 25.0 5.6 33.0 3.5 2.0 19.1 4.0 38.0 9.4 38.1 15. Such systems are sometimes slow moving with little or no shock loading.5 6.0 25.1 15.1 4. and spare links. For attachments see pages 14 .0 14. wheat and raw food mixtures.9 152. Technical Details (mm) Breaking Load lb/f (Newtons) MIN MIN Pitch Inch Pitch Inch Pitch mm Pitch mm Bush Diam Hollow Bearing Pin Inside Width Bore Diam Width Outer Inner Pin Diam Pin Length MIN MAX MIN MAX MIN MIN MIN MIN MAX MAX Plate Height Width Width Outer Head Inner MAX Hollow Bearing Pin .0 23.0 26.1 29.6 33. for example an extra strength 24000 lbs chain has basically the same dimensions as a normal 12000 lbs series chain.0 19.2 - 15.8 5. Chain Ref.8 5. Most of these applications use scraper type conveyor systems that normally have long centre distances between sprockets.4 228.9 36.5 43.5 2.1 13. For the details of individual pitch sizes.0 19.Extra Strength 12000 24000 48000 54000 107000 213500 A A A A B C D E F G H1 J K L 1.0 3.0 22.4 25.5 44.1 7.7 Solid Bearing Pin .Extra Strength 15000 30000 60000 67000 134000 267000 A A A A B C D E F G H1 J K L 1.1 51.9 152. 2 228.Hollow Pin (Extra strength version of 6000 lbf series) 1.3 127.6 127.0 38.9 101.0 4.39 4.2 88.0 Mass 6.0 8.8 76.58 2.5 76.4 177.12 I Renold Conveyor Chain Catalogue Extra Strength Conveyor Chain Section 1 Standard Range .19 2.Hollow Pin (Extra strength version of 24000 lbf series) 15000 lbf.91 5. ** Preferred sizes of chain.80 2.57 5.Solid Pin (Extra strength version of 7500 lbf series) 1.8 76.5 5. Pitch Inch Pitch mm Roller Chain No Extra Strength Mass Pitch Inch Pitch mm Roller Chain No Extra Strength kg/m 12000 lbf.0 60000 lbf.4 177.31 9.5 5.03 5.0 6.47 2.0 3.93 6.23 6.0 3.21 10.2 88.95 3. with standard sprockets and attachments available.3 127.0 9.95 6.0 4.9 101.0 7.Solid Pin (Extra strength version of 30000 lbf series) 24000 lbf.8 63.0 152.71 2.Solid Pin (Extra strength version of 15000 lbf series) 2.8 203.8 63. consult Conveyor Chain Designer Guide. 107000 Newtons Breaking Load .1 50.9 101.2 88.3 127.5 5.9 101.30 4.67 2.8 203. For Roller Selection procedure. 54000 Newtons Breaking Load .0 8.0 12.27 50.18 10.44 .5 76.0 3.0 152.3 127.0 152.22 12.49 3.see page 13.6 102081/03 102121/12** 102141/12 102161/12** 102181/12 102201/12 102241/12** 102281/12 102321/12 102361/12 3.6 127.0 152.0 8.0 4.39 2.88 2.5 4.28 7.8 203.0 7.40 11.5 3.0 152.54 3.97 2.94 3.0 7.0 6.4 162060/03 162080/12** 162100/12 162120/12** 162140/12 162160/12** 162180/12 162200/12 162240/12** 2. Where alternative rollers are required.66 9. amend the roller suffix for identification purposes when ordering .5 4.65 4.21 30000 lbf.0 3.9 101.0 2.0 4.0 5.5 2.Hollow Pin (Extra strength version of 12000 lbf series) 2.6 114.0 6.2 228.5 5. 67000 Newtons Breaking Load .6 162081/03 162121/12** 162141/12 162161/12** 162181/12 162201/12 162241/12** 162281/12 162321/12 162361/12 * Bush chain only.0 8.4 177.6 304.0 12.20 12.74 11.8 203.0 88.5 3.0 9.0 3.6 204.4 102060/03* 102080/12** 102100/12 102120/12** 102140/12 102160/12** 102180/12 102200/12 102240/12** 38.72 5.5 4.43 6.16 8.8 162142/12 162162/12** 162202/12 162242/12** 162282/12 162322/12 162362/12 162482/12 9.9 101. 267000 Newtons Breaking Load .0 kg/m 48000 lbf. 2135000 Newtons Breaking Load .5 2.S.89 4.6 114.5 4.0 9.0 3.92 8.6 114.5 4.6 114. 88.2 88.4 177.0 5.50 7.2 228.0 6.57 2.35 5.65 3.14 This table indicates standard roller chain configurations.0 7.0 6.62 6.2 228.5 4.50 3.90 14.0 6.42 50.60 4.24 4.1 50. 5.8 102142/03 102162/12** 102202/12 102242/12** 102282/12 102322/12 102362/12 102482/12 8.0 2. 134000 Newtons Breaking Load .46 8.0 9.91 9.B.90 4.0 3.0 152.13 2. Small rollers .3 22.0 /12 /12 /12 2.available on request.0 25.0 23. CONNECTING LINKS R No 107 RIVETING LINK ONE SIDE No 58 SOFT CIRCLIP LINK No 69 LINK WITH NUTS Chain Breaking Load lbf 12000* 24000* 45000* Newtons 54000 107000 213500 No 58 Chain Centre to No 107 Solid Pin Hollow Pin lbf 15000* 30000* 60000* Dimensions A & B are maximum sizes.0 17.5 4.9 114. For standard versions of these chains see page 8.8 76.8 24.6 66.0 36.0 19.6 Pitch Inch Pitch mm MIN MIN Diam Tread Diam Flange Width M1 P1 W 31. /42 Case Hardened Steel) PLAIN ROLLER FLANGED ROLLER Rollers Solid Pin Hollow Pin lbf Newtons lbf Newtons Standard roller breaking load 12000 24000 48000 54000 107000 213500 Pitch Inch Pitch mm MIN MIN Tread Diam Roller Width Rollers Available Standard plain 15000 30000 60000 67000 84000 200000 2.0 46.0 30.0 23.7 14. Newtons 67000 134000 267000 No 11 Chain Centre to No 69 Chain Centre to Hollow Pin Both Solid Pin Both Plain Side Fastener Side Plain Side Fastener Side Plain Side Fastener Side A&B A&B A B A B A B 18.3 85.5 88.0 - 22.3 60.0 30. consult Conveyor Chain Designer Guide.0 50.5 3.8 47.I 13 Renold Conveyor Chain Catalogue Extra Strength Conveyor Chain Section 1 Rollers and Connecting Links /21 STANDARD ROLLERS (Mild Steel) /12 STANDARD ROLLER (/12 Case Hardened Steel) /22 STANDARD ROLLERS (Case Hardened Steel) /41 & /42 FLUSH GEARING ROLLERS (/41 Mild Steel.8 47.8 24.5 63.6 66.7 41.3 /21 /22 /21 /22 /21 /22 For Roller Selection procedure.0 23.0 .0 17.0 28.0 30.2 101.0 - - - 19.7 14.0 Roller Available Standard flanged M1 W 31.0 3.0 4.5 19. 5 114.8 K3 K3 K3 76.8 89.6 K2 K2 152.4 15.2 31.2 101.2 - 13.2 9.5 10.2 43.2 31.1 50.2 101.027 6000 /7500 19.8 31.4 25.0 152.5 0.1 / 3.9 / 7.1 50.420 .5 10.018 0.2 101.3 15.6 38.14 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 BS K Attachments (Integral) Technical Details (mm) Breaking Load Platform Height Transverse Pitch Width Over Attachment Inner/Outer Attachment Thickness Attachment Type Attachment Minimum Outer Pitch Attachment Minimum Inner Pitch Centre Hole Dia Outer Holes Dia Attachment Hole Pitch Platform Length lbf Mass (kg/Att) Conveyor chain .045 0.5 44.077 0.5 44.2 106 / 115 3.6 152.0 0.7 13.BS K attachments (integral) A B C D E F H I J K 3000 16.2 101.018 0.8 146.009 0.240 24000/30000 38.8 K3 K3 K3 K3 76.2 12.141 12000/15000 31.127 0.5 10.310 0.6 152.2 56.172 0.7 31.0 0.8 76.6 101.8 88.6 127.1 / 5.0 198 / 198 8.2 9.2 9.4 19.4 101.0 76.9 74.127 0.0 44.4 203.6 127.5 9.2 152.0 108.4 203.318 36000/45000 50.6 152.172 0.5 70.8 K1 K3 K3 K3 38.8 / 3.5 89.7 10.4 7.0 152.2 57.5 0.4 76.1 K1 K2 K3 101.7 13.4 76.5 10.8 / 1.6 9.2 9.0 63.5 10.8 57.8 57.3 12.4 25.2 7.6 152.2 101.7 13.0 56.2 9.0 125.4 10.2 101.8 57.0 130 / 136 5.0 0.0 114.109 0.2 9.6 101.5 66 / 70 1.5 63.2 63.5 31.4 13.0 107.4 7.0 146 / 157 7.8 76.2 22.4 25. 907 36000 / 45000 / 60000 50.5 76.0 44.6 228.0 56.685 0.2 228.9 122 / 133 5.193 0.4 177.0 127.2 31.7 44.0 0.0 152.2 - 7.2 12.7 - 10.0 0.0 0.104 0.5 88.9 101.4 152.8 152.9 88.2 12.6 10.2 101.1 70.5 76.6 15.299 0.6 304.8 57.7 13.2 106 / 116 4.2 88.9 88.2 8.0 152.270 1.0 56.Renold Conveyor Chain Catalogue I 15 Conveyor Chain Section 1 BS K Attachments (Welded) Technical Details (mm) Breaking Load Platform Height Transverse Pitch lbf Width Over Attachment Inner/Outer Attachment Thickness Attachment Type Attachment Minimum Outer Pitch Attachment Minimum Inner Pitch Centre Hole Dia Outer Holes Dia Attachment Hole Pitch Platform Length MAX Mass (kg/Att) Conveyor chain .2 228.4 88.581 0.4 152.059 0.8 16.299 0.2 228.9 165.0 168.3 - 12.2 50.0 38.0 202 / 200 8.0 229.0 K1 K2 K2 K2 K2 152.710 .0 127.5 0.5 63.2 12.8 146.3 63.4 177.0 89.3 152.0 K1 K1 K2 K2 K2 76.581 0.8 63.810 2.289 0.6 304.027 0.0 10.0 108.6 228.193 0.8 88.449 0.0 1.1 89.2 88.050 1.6 10.6 127.2 8.0 84.5 229 / 252 10.4 177.7 38.2 19.7 19.6 228.0 112.5 10.059 0.4 56.7 13.5 88.104 0.0 127.8 63.068 6000 / 7500 19.4 203.8 203.0 171.054 0.5 31.2 12.0 127.9 35.8 76.0 108.8 19.9 114.6 228.4 203.119 0.7 19.6 152.9 165.0 84.0 56.0 146 / 159 6.0 56.0 76.0 K1 K1 K2 K2 38.4 19.2 9.2 88.581 0.6 101.0 K1 K2 K2 K2 K2 K2 127.5 10.930 1.0 70.BS K attachments (welded) A B C D E F H I J K 3000 16.9 88.8 50.1 50.028 0.6 - 9.0 K1 K1 K1 K2 K2 50.4 7.8 57.0 152.7 13.6 101.5 44.8 13.6 304.7 - 19.443 24000 / 30000 38.8 57.0 28.6 304.9 133.2 31.0 84.4 22.0 56.6 127.1 76.0 152.9 114.0 38.8 203.0 229.050 1.905 90000 57.0 K1 K2 K2 K2 228.2 25.8 228.2 69.5 68 / 72 3.9 - 13.0 0.163 12000 / 15000 31.7 13.2 228. 8 69.8 44.9 108.954 0.2 82.1 57.2 88.0 106.435 0.2 10.0 10.16 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 BS F1 Attachments (Welded) Technical Details (mm) Breaking Load Pitch Inner Plate Pitch Outer Plate MIN MIN Transverse Pitch Attachment Hole Size Width Over Attachment Outer Plate Width Over Attachment Inner Plate Attachment Thickness Attachment Face Height Total Height of Attachment Attachment Hole Distance From Chain Centreline lbf Mass (kg) Conveyor chain .7 165.5 7.0 146.9 0.0 4.4 133.4 A B C (Max) D (Max) E F G H 44.5 56.950 1.9 101.0 116.0 202.0 252.0 8.7 19.0 229.530 .0 25.5 90.3 133.5 63.0 68.0 152.0 133.0 202.7 72.5 12.4 63.0 171.0 146.082 0.0 108.0 152.0 84.0 90.5 63.1 190.0 19.4 31.5 63.4 152.0 152.6 139.7 13.0 6.0 159.5 38.4 51.0 8.054 0.1 165.0 200.4 9.163 0.0 5.0 88.BS F1 attachments (welded) 3000 6000 / 7500 12000 / 15000 24000 / 30000 36000 / 45000 60000 90000 50.0 200.6 114.5 44.0 3.0 146.0 32.2 13.0 122.5 76.0 26. 0 152.0 252.0 84.5 76.0 8.8 57.2 88.0 152.7 13.0 5.0 8.068 0.0 106.BS F2 attachments (welded) 3000 6000 / 7500 12000 / 15000 24000 / 30000 36000 / 45000 60000 90000 50.270 1.9 108.9 101.231 0.2 13.6 139.4 9.0 68.0 152.2 10.9 88.0 6.0 200.9 88.9 0.580 1.0 200.Renold Conveyor Chain Catalogue I 17 Conveyor Chain Section 1 BS F2 Attachments (Welded) Technical Details (mm) Breaking Load Pitch Inner Plate Pitch Outer Plate MIN MIN Transverse Pitch Attachment Hole Size Width Over Attachment Outer Plate Width Over Attachment Inner Plate Attachment Thickness Attachment Face Height Pitch of Attachment Holes lbf Mass (kg) Conveyor chain .0 146.0 202.0 122.7 72.8 69.270 1.9 88.4 133.7 19.0 4.0 146.0 108.5 12.7 165.5 38.0 133.4 152.104 0.6 114.0 3.0 202.0 146.0 25.0 10.3 133.0 171.1 165.2 69.810 .1 190.5 7.4 31.0 116.0 159.2 82.5 56.4 I J K (Max) L (Max) M N O 44.1 57.0 44.0 229. 4 127.0 133.4 25.8 57.8 25.0 16.8 - 0.0 9.4 203.6 100.0 123.1 3.0 16.4 67.010 0.479 * Alternative width available.8 - 0.1 35.6 48.2 9.0 127.2 122.0 350.2 101.1 38.8 1.0 86.4 74.2 249.0 1.041 12000 / 15000 L0 L0 L0 L0 L0 L1 L2 73.0 7.8 3.101 0.4 111.18 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 BS L Attachments (Integral) Technical Details (mm) Breaking Load Type Transverse Pitch Pitch of Attachment Holes Attachment Face Length Width Over Attachment Outer Attachment Hole Diameter Total Height of Attachment Attachment Thickness Distance of Pitch point to Attachment Face Box Width* lbf Mass (kg) Conveyor chain .4 18.0 0.0 - 51.6 10.4 203.9 58.073 24000 / 30000 L0 - - 128.3 61.8 3.0 0.9 199.0 28.4 25.025 0.0 7.8 3.045 0.0 76.4 25.2 254.4 25.007 0.4 7.6 42.8 1.2 25.8 1.5 10.4 24.2 31.4 25.4 41.1 38.8 19.016 0.8 3.8 3.8 16.8 3.111 0.1 38.1 38.9 21.0 - 61.5 57.0 18.4 25.4 41.8 25.130 0.4 25.0 18.8 3.051 0.4 25.1 38.4 25.5 300.0 19.8 1.0 18.0 44.BS L attachments (integral) A B C D E F G H 3000 L0 L0 L0 L0 L1 L2 41.8 3.071 0.1 38.4 - 0.0 18.3 123.0 152.091 0.0 150.0 5.0 16.4 25.4 3.160 0.0 350.0 152.0 19. .6 127.0 299.8 137.479 60000 L0 - - 135.0 16.0 18.0 152.8 3.4 19.8 148.267 36000 / 45000 L0 - - 135.058 0.0 304.5 38.5 148.4 73.2 254.8 3.0 19.2 330.009 6000 / 7500 L0 L0 L0 L0 L0 L1 L2 58.3 107.4 25.0 19.4 54.1 66.0 304.6 42.0 7.8 3.8 48.6 108.013 0.5 301.7 250.4 25.8 3.2 82.4 198. Please enquire.4 36.0 19.041 0.6 125.0 - 61.8 106.2 330.8 1.0 320.2 99.0 0.007 0.0 147.0 16.072 0.7 41.0 19. 8 17.5 222.3 241.1 63.8 90000 279. .5 11.8 60000 241.3 127.50 22.8 44.3 190.6 34.3 317.5 82.9 9.8 20.will be increased pro rata for other types.8 108.6 152.9 60.6 114.9 17.50 19.20 6.4 279.7 30.4 127.1 101.4 171.8 76.5 11.7 16.8 36000/45000 241.9 9.5 11.8 17.7 9.35 13.0 38.3 241.8 20.8 50.8 24000/30000 - - 190.8 20.5 228.6 114.65 - - - - 6000 7500 - 95.5 228.5 82.3 298.8 20.5 Breaking Load lbf Hole Diameter Pitch* lbf MIN One hole Two holes * Based on small plain roller .8 20.8 17.5 44.8 50.0 139.7 14.5 190.8 228.8 17.20 29.8 17.9 9.3 82.5 8.9 9.50 22.3 8.3 14.9 9.7 177.7 12000/15000 - - 133.8 20.2 16.3 95.5 11.7 16.5 11.5 30.5 11.9 9.0 177.6 152.4 190.6 139.9 60.6 101.4 330.9 9.8 25.9 17.5 20.6 304.9 95.0 152.3 101.6 304.3 190.3 - 9.8 17.Renold Conveyor Chain Catalogue I 19 Conveyor Chain Section 1 BS Attachments Holes in Link Plates Technical Details (mm) Pitch Bush Chain Pitch Small Roller Pitch Large Roller Attachment Hole Pitch Hole Diameter Cone Diameter MIN MIN MIN P P P D P A B C 3000 50.5 11.0 184.6 9.4 190.4 34.6 108.3 317.5 11.5 20.9 9.5 30.8 17. 0 70. Extensions are case .0 55.2 28.0 41.0 Breaking Load Extension Diameter Mass 11.0 23.3 25.0 0.0 16.0 30.hardened or can remain soft to suit customers requirements.20 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 BS Extended Bearing Pins Technical Details (mm) Centre Distance To rivet End Centre Distance To pin End Extension Length A B C D 3000 7500 15000 30000 45000 60000 90000 11.2 70.B Extended bearing pins are an integral part of the chain assembly and cannot be removed without dismantling the chain .522 0.0 35.2 113.4 38.0 107.0 44.0 70.0 38.020 0.2 40.620 lbf BS Extended bearing pins N.0 35.5 57. .2 107.059 0.286 0.0 19.522 0. Extended bearing pins can be specified at any pitch point of the chain.0 65.0 47.0 84.132 0.0 22.6 35. 0 71.0 19.6 - 48.490 .1 16.560 36000 45000 70.8 58.0 38.0 70.7 83.2 29.1 - 16.0 0.0 113.0 - 70.0 35.0 - 57.0 1.8 64.560 0.5 - 19.5 107.0 - 36.8 0.4 11.200 0.900 90000 - - - - 70.6 45.2 56.200 24000 30000 57.5 107.0 29.2 57.8 31.6 28.0 - 109.0 - 38.0 56.3 64.1 38.0 34.30 - 66.3 - 44.112 0.5 19.3 34.Renold Conveyor Chain Catalogue I 21 Conveyor Chain Section 1 BS Spigot Pins Technical Details (mm) Breaking Load Extended Length Extension Diameter Centre Distance To nut End Centre Distance To Pin End Extended Length Extension Diameter Centre Distance To nut End Centre Distance To pin End lbf Mass (kg) Spigot pins-Through hollow pin type 1 Spigot pins-Mid pitch on outer link type 2 A B C D E F G H 3000 - - - - 25.0 31.900 0.8 - 61.0 0.8 83.0 - 31.2 28.0 31.2 - 28.0 0.0 16.0 17.0 0.5 44.0 107.0 - 31.900 60000 - - - - 70.8 0.8 58.3 - 57.5 58.0 - 85.036 6000 7500 38.7 45.112 12000 15000 44. 5 33.0 50.3 0.73 290 24000 66.00 171.9 1.9 68.26 165 12000 50.80 88.0 86.94 545 36000 94.8 0.22 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 BS Outboard Rollers Technical Details (mm) Breaking Load Distance Between Outboard Rollers Distance Over Outboard Rollers Centre Distance To nut End Centre Distance To bolt End Roller Diameter lbf Mass Roller Load Per Pitch Point (kg) (kg) BS Outboard rollers A B C D E 6000 44.5 113.74 725 Ball bearing outboard rollers Bolted through hollow bearing pins .00 118.1 4.6 75.7 69.5 57.0 92.6 46.45 75.0 55.5 106. 5 35.3 32.5 15.4 54.0 80.0 4.0 70.0 60.0 80.8 22.0 114.0 70.1 64.3 8.1 M450 M630 M900 450000 630000 900000 200 250 250 800 1000 1000 42. Stainless and zinc plated chains are available to order.0 8.0 12.0 41. Hollow Bearing Pin Bore Diam.7 18. .5 4.0 10.0 10.0 82.0 5.6 70.0 35.0 8.0 120.0 28.0 50.0 45.4 45.0 M160 M224 M315 160000 224000 315000 100 125 160 500 630 630 25.0 44.2 24.0 35.0 38.34.29.0 10.7 Dimensions listed above will not vary with pitch size in each given breaking load.0 120.5 3. Inside Width Inner Inside Width Outer Pin Diam.0 15.0 5.0 28.0 66.0 6.0 4.5 - 20.0 33.0 65.5 46.8 97.7 60.0 83.0 17.0 25.0 153.5 41.6 84.0 6.0 60.0 30.5 40.0 16.0 50.0 5.0 27.0 12.0 32.0 - 37.4 MC112 MC224 112000 224000 100 160 315 500 29.0 8.Renold Conveyor Chain Catalogue I 23 Conveyor Chain HOLLOW BEARING PINS Chain Chain No DEEP LINK Section 1 ISO 1977 Specification DEEP LINK SOLID BEARING PINS Technical Details (mm) Breaking Load Pitch Pitch Bush Diam.0 36. For the details of individual pitch sizes.3 20.0 52.6 60.0 19.0 22.0 36.0 90.0 45.0 100.0 32.8 Solid Bearing Pin A A B C D E F G H1 H2 J K L M40 40000 63 250 12.0 14.0 43.5 10.0 - 56.0 - 24.0 45.0 14.0 18.0 21.0 65.0 6.0 40.0 M56 M80 M112 56000 80000 112000 63 80 80 250 315 400 15. see pages 24 .0 32.3 39. and spare links.0 60.0 7. Pin Length MIN MAX MAX MIN MIN MIN MAX MAX Plate Height Plate Height Plate Width Outer Plate Width Inner Head (Newtons) MIN MAX Hollow Bearing Pin A A B C D E F G H1 H2 J K L MC56 56000 80 250 21.0 4.0 43.0 21.0 6.0 48.5 60.0 8.0 72.0 29.0 30.0 43.0 97.0 113.0 133.0 14.3 37.0 30.0 16.0 54. rollers.5 3. For attachments see pages 30 .0 63.6 30.7 15.0 47.0 31.2 23.0 78.0 25.0 33.5 20.0 50.0 6. 20 48.90 6.30 6.29 2.27 26.50 3.32 3.80 13.00 5.45 18.60 5.94 9.30 MC56 Hollow Pin 80 100 125 160 200 250 MC56B80 MC56B100 MC56B125 MC56B160 MC56B200 MC56B250 3.50 8.60 39.80 M450B200 M450B250 M450B315 M450B400 M450B500 M450B630 M450B800 23.62 8.64 27.76 1.90 22.70 15.56 17.80 5. (Bush) MC112 Hollow Pin M56 Solid Pin 63 80 100 125 160 200 250 Pitch mm M112B80 M112B100 M112B125 M112B160 M112B200 M112B250 M112B315 M112B400 6.50 2.51 4.10 7.15 25.30 5.98 8.40 2.20 2.32 M900B250 M900B315 M900B400 M900B500 M900B630 M900B800 M900B1000 53.08 M224B125 M224B160 M224B200 M224B250 M224B315 M224B400 M224B500 M224B630 12.42 M160B100 M160B125 M160B160 M160B200 M160B250 M160B315 M160B400 M160B500 9.15 2.69 M80B80 M80B100 M80B125 M80B160 M80B200 M80B250 M80B315 4.12 20.25 35.30 11.50 41.11 1.40 6.97 1.28 32.70 1.20 16.38 3.38 3.65 19.13 3.10 10.63 M56B63 M56B80 M56B100 M56B125 M56B160 M56B200 M56B250 3.20 12.57 3.20 44.20 M112 Solid Pin 80 100 125 160 200 250 315 400 kg/m 100 125 160 200 250 315 MC112B100 MC112B125 MC112B160 MC112B200 MC112B250 MC112B315 7.77 9.20 9.90 160 200 250 315 400 500 MC224B160 MC224B200 MC224B250 MC224B315 MC224B400 MC224B500 12.96 6.83 3.60 14.80 M315 Solid Pin 160 200 250 315 400 500 630 M450 Solid Pin 200 250 315 400 500 630 800 M630 Solid Pin * Add an F to the end of the part number if a product with flatted round parts (Pin and Bush) is required.86 1.80 M160 Solid Pin 100 125 160 200 250 315 400 500 M224 Solid Pin 125 160 200 250 315 400 500 630 MC224 Hollow Pin M80 Solid Pin 80 100 125 160 200 250 315 Chain No.83 17.45 10.30 28.22 M630B250 M630B315 M630B400 M630B500 M630B630 M630B800 M630B1000 35.10 3.80 7.37 4.80 8.63 4.20 37.90 2.30 6.60 8.57 6.68 5.70 2. (Bush) kg/m M40 Solid Pin 63 80 100 125 160 200 250 M40B63 M40B80 M40B100 M40B125 M40B160 M40B200 M40B250 2.24 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 ISO Standard – Bush Pitch mm Chain No.67 3.70 13.43 4.15 M315B160 M315B200 M315B250 M315B315 M315B400 M315B500 M315B630 19.53 30.50 7.81 2. 250 315 400 500 630 800 1000 M900 Solid Pin 250 315 400 500 630 800 1000 .95 2.60 6.30 8. 70 13.40 28. (Small) MC112 Hollow Pin M56 Solid Pin 63 80 100 125 160 200 250 Pitch mm M112S80 M112S100 M112S125 M112S160 M112S200 M112S250 M112S315 M112S400 7.86 9.95 19.70 M56S63 M56S80 M56S100 M56S125 M56S160 M56S200 M56S250 3.58 3.13 M315S160 M315S200 M315S250 M315S315 M315S400 M315S500 M315S630 21.80 50.25 26.00 5.22 11.78 1.20 2.80 3.12 42.37 5.00 36.28 10.00 M160 Solid Pin 100 125 160 200 250 315 400 500 M224 Solid Pin 125 160 200 250 315 400 500 630 MC224 Hollow Pin M80 Solid Pin 80 100 125 160 200 250 315 Chain No.59 2.97 M630S250 M630S315 M630S400 M630S500 M630S630 M630S800 M630S1000 38.20 6.92 6.38 5.80 5.40 9.80 25.70 2.90 24.90 4.40 MC56 Hollow Pin 80 100 125 160 200 250 MC56S80 MC56S100 MC56S125 MC56S160 MC56S200 MC56S250 4.40 11.65 9.40 16.35 7.24 38.05 12.90 15.34 8.50 30.20 3. 250 315 400 500 630 800 1000 M900 Solid Pin 250 315 400 500 630 800 1000 Section 1 ISO Standard – Small Roller .16 18.51 13.97 M160S100 M160S125 M160S160 M160S200 M160S250 M160S315 M160S400 M160S500 11.15 2.00 1.65 4.52 22.60 4.45 6.90 2.Renold Conveyor Chain Catalogue I 25 Conveyor Chain Pitch mm Chain No.00 8.40 M112 Solid Pin 80 100 125 160 200 250 315 400 kg/m 100 125 160 200 250 315 MC112S100 MC112S125 MC112S160 MC112S200 MC112S250 MC112S315 9.75 4.20 10.35 7.00 9.66 27.78 17.16 3. (Small) kg/m M40 Solid Pin 63 80 100 125 160 200 250 M40S63 M40S80 M40S100 M40S125 M40S160 M40S200 M40S250 2.07 3.90 10.44 3.76 18.00 M80S80 M80S100 M80S125 M80S160 M80S200 M80S250 M80S315 5.46 4.77 3.87 6.78 7.90 8.50 8.98 3.70 14.20 M900S250 M900S315 M900S400 M900S500 M900S630 M900S800 M900S1000 55.55 20.87 1.00 4.50 3.34 2.50 2.90 40.48 46.60 8.32 32.45 4.45 160 200 250 315 400 500 MC224S160 MC224S200 MC224S250 MC224S315 MC224S400 MC224S500 15.64 M224S125 M224S160 M224S200 M224S250 M224S315 M224S400 M224S500 M224S630 14.45 M315 Solid Pin 160 200 250 315 400 500 630 M450 Solid Pin 200 250 315 400 500 630 800 M630 Solid Pin * Add an F to the end of the part number if a product with flatted round parts (Pin and Bush) is required.90 13.31 6.30 M450S200 M450S250 M450S315 M450S400 M450S500 M450S630 M450S800 26. 00 17.05 35.30 19.50 14.32 M900F315 M900F400 M900F500 M900F630 M900F800 M900F1000 88.70 M315F200 M315F250 M315F315 M315F400 M315F500 M315F630 31.34 25.10 6.40 3.80 59.28 28.05 7.10 M160 Solid Pin 100 125 160 200 250 315 400 500 M224 Solid Pin 125 160 200 250 315 400 500 630 MC224 Hollow Pin M80 Solid Pin 80 100 125 160 200 250 315 Chain No.95 7.89 4.88 8.45 7.90 9.00 19.18 14.28 61.67 31.70 13.40 5.60 3.58 9.56 41.00 23.10 M224F160 M224F200 M224F250 M224F315 M224F400 M224F500 M224F630 22. (Flanged) MC112 Hollow Pin M56 Solid Pin 63 80 100 125 160 200 250 Pitch mm M112F100 M112F125 M112F160 M112F200 M112F250 M112F315 M112F400 12. (Flanged) kg/m M40 Solid Pin 63 80 100 125 160 200 250 M40F63 M40F80 M40F100 M40F125 M40F160 M40F200 M40F250 4.30 5.80 8. 250 315 400 500 630 800 1000 M900 Solid Pin 250 315 400 500 630 800 1000 .84 11.41 76.80 4.70 11.20 M450F200 M450F250 M450F315 M450F400 M450F500 M450F630 M450F800 47.74 8.02 25.00 2.36 3.40 M315 Solid Pin 160 200 250 315 400 500 630 M450 Solid Pin 200 250 315 400 500 630 800 M630 Solid Pin * Add an F to the end of the part number if a product with flatted round parts (Pin and Bush) is required.26 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 ISO Standard – Flanged Roller Pitch mm Chain No.10 52.85 160 200 250 315 400 500 MC224F160 MC224F200 MC224F250 MC224F315 MC224F400 MC224F500 22.57 3.54 6.30 9.57 5.87 19.85 13.40 34.10 11.00 27.12 8.55 37.64 41.84 17.78 10.08 12.22 MC56 Hollow Pin 80 100 125 160 200 250 MC56F80 MC56F100 MC56F125 MC56F160 MC56F200 MC56F250 7.20 13.90 3.95 3.20 M56F80 M56F100 M56F125 M56F160 M56F200 M56F250 6.00 48.15 M160F125 M160F160 M160F200 M160F250 M160F315 M160F400 M160F500 16.30 6.20 4.22 3.75 46.52 M112 Solid Pin 80 100 125 160 200 250 315 400 kg/m 100 125 160 200 250 315 MC112F100 MC112F125 MC112F160 MC112F200 MC112F250 MC112F315 16.60 21.20 53.93 M80F80 M80F100 M80F125 M80F160 M80F200 M80F250 M80F315 9.10 16.00 11.65 2.65 14.30 10.63 4.40 2.00 66.00 4.48 5.13 M630F250 M630F315 M630F400 M630F500 M630F630 M630F800 M630F1000 71.25 10. 24 11.32 2.22 3.55 6.96 9.75 18.70 M450P200 M450P250 M450P315 M450P400 M450P500 M450P630 M450P800 44.32 4.12 12. (Plain) kg/m M40 Solid Pin 63 80 100 125 160 200 250 M40P63 M40P80 M40P100 M40P125 M40P160 M40P200 M40P250 4.65 16.45 11.80 24.38 9.40 52.73 29.00 25.67 M160 Solid Pin 125 160 200 250 315 400 500 M224 Solid Pin 160 200 250 315 400 500 630 MC224 Hollow Pin 160 200 250 315 400 500 MC224P160 MC224P200 MC224P250 MC224P315 MC224P400 MC224P500 21.18 5.60 7.90 5.65 8.00 31.17 14.88 2.33 8.35 3.37 22.62 M80P80 M80P100 M80P125 M80P160 M80P200 M80P250 M80P315 9.73 M160P125 M160P160 M160P200 M160P250 M160P315 M160P400 M160P500 15.84 12.20 37.65 10.50 13.60 56.06 MC56 Hollow Pin 80 100 125 160 200 250 MC56P80 MC56P100 MC56P125 MC56P160 MC56P200 MC56P250 6.75 26.80 6.98 5.43 3.50 15.26 7.14 M56P80 M56P100 M56P125 M56P160 M56P200 M56P250 5.20 16.83 M224P160 M224P200 M224P250 M224P315 M224P400 M224P500 M224P630 20.50 38.80 4.80 4.70 3.43 20.30 9.60 M900P315 M900P400 M900P500 M900P630 M900P800 M900P1000 83.Renold Conveyor Chain Catalogue I 27 Conveyor Chain Pitch mm Chain No.68 5.00 18.48 7.95 6.00 41.24 34.00 46. 250 315 400 500 630 800 1000 M900 Solid Pin 315 400 500 630 800 1000 Section 1 ISO Standard – Plain Roller . (Plain) kg/m MC112 Hollow Pin M56 Solid Pin 80 100 125 160 200 250 Pitch mm M112P100 M112P125 M112P160 M112P200 M112P250 M112P315 M112P400 11.48 7.25 2.70 3.78 4.80 8.36 M80 Solid Pin 80 100 125 160 200 250 315 M112 Solid Pin 100 125 160 200 250 315 400 Chain No.40 22.00 63.60 33.53 4.67 100 125 160 200 250 315 MC112P100 MC112P125 MC112P160 MC112P200 MC112P250 MC112P315 14.98 3.00 17.50 11.90 12.47 46.33 72.37 M630P250 M630P315 M630P400 M630P500 M630P630 M630P800 M630P1000 60.50 10.80 M315 Solid Pin 200 250 315 400 500 630 M450 Solid Pin 200 250 315 400 500 630 800 M630 Solid Pin * Add an F to the end of the part number if a product with flatted round parts (Pin and Bush) is required.46 13.21 M315P200 M315P250 M315P315 M315P400 M315P500 M315P630 29.56 2.67 51.33 3.80 10. 0 170.0 42.0 42.0 19.0 55.0 23. Roller Width Plain Tread Diam.0 M W M1 W M1 P W 18.0 140.0 100.0 19.0 70.0 60.0 60.0 42. .0 36.0 27.0 140.0 23. Roller Width M W M1 W M1 P W 30.0 60.0 120.0 47.0 36.0 30.0 120.0 85.0 50.0 23.0 50.0 50.0 76.0 31. consult Conveyor Chain Designer Guide.28 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 ISO Rollers PLAIN ROLLER SMALL ROLLER Chain Ref Chain No FLANGED ROLLER Technical Details (mm) Breaking Load Small Tread Diam.0 42.0 23.0 60.0 60.0 85.0 70.0 23.0 76.0 65.0 60.0 42.0 27.0 42.0 65.0 25.0 100.0 42.0 170.0 85.0 27.0 36.0 19.0 50.0 70.0 120.0 31.0 50.0 85.0 140.0 76.0 31.0 47.0 47.0 50.0 36.0 42.0 31.0 36.0 120.0 42.0 100.0 (Newtons) Hollow Bearing Pin Rollers MC56 MC112 MC224 56000 112000 224000 Solid Bearing Pin Rollers M40 M56 M80 M112 M160 M224 M315 M450 M630 M900 40000 56000 80000 112000 160000 224000 315000 450000 630000 900000 For Roller Selection procedure.0 36.0 55. Roller Width Flanged Tread Diam.0 85.0 100.0 42.0 170.0 70.0 23.0 55.0 210.0 65.0 42.0 100.0 21.0 70.0 31.0 70. Flange Diam.0 31. 0 79.5 Hollow Bearing Pin Rollers .4 36.2 22.4 36.4 36.4 38.2 41.9 76.2 41.7 48.1 38.4 56.6 41.2 33.2 23.1 20.9 76.3 31.9 44.2 23.4 58.6 41.2 23.connecting links MC56 MC112 MC224 56000 112000 224000 Solid Bearing Pin Rollers .1 27.3 31.7 48.2 22.1 93.6 65.2 41.9 31.6 41.3 31.4 56.2 29.1 20.9 31.1 24.2 29.1 27.7 48.9 31.6 65.9 76.6 70.7 50.6 65.1 27.connecting links M40 M56 M80 M112 M160 M224 M315 M450 M630 M900 40000 56000 80000 112000 160000 224000 315000 450000 630000 900000 .Renold Conveyor Chain Catalogue I 29 Conveyor Chain Section 1 ISO Connecting Links Chain Ref No 107 No 58A RIVETING LINK SPLIT PIN LINK Technical Details (mm) Chain No Breaking Load Newtons No 107 Chain Plain Side Centre to Fastener Side No 58A# Chain Chain Side Centre to Fastener Side A B A B 22.9 A B A B 20.6 51.4 56. 07 0.0 18.0 11.0 100 190 300 50 150 240 350 1.0 11.0 50 100 155 35 85 135 190 0. Outer Holes Diam.0 14.85 M450 450000 75 180 228 / 255 10.0 K1 K2 K2 K2 160 200 250 315 160 200 250 315 18.0 14.40 2.0 11.0 18.0 11.30 0.70 4.20 0.0 - 24.0 14.60 1.0 11.0 25 50 85 25 50 75 110 0.40 3.25 0.45 0.0 85 155 240 40 125 195 280 0.0 14.0 24.0 24.0 65 125 190 40 105 165 230 0.50 9.0 14.70 5.0 20 40 65 20 40 60 85 0.85 1.0 K1 K2 K3 K3 125 200 250 315 125 200 250 315 18.0 K1 K2 K3 K3 100 160 200 250 100 160 200 250 14.0 14.80 .0 30.0 - 18.0 50 85 125 25 75 110 150 0.0 9.0 9.80 1.0 K1 K3 K3 K3 80 125 160 200 80 125 160 200 11.0 14.0 - 30.Solid Pin Type Section 1 ISO K Attachments Chain Ref Chain No Technical Details (mm) Breaking Load Platform Height Transverse Pitch Width Over Attachment Inner/Outer Attachment Thickness Inner/Outer Attachment Type Attachment Minimum Outer Pitch Attachment Minimum Inner Pitch Centre Hole Diam.0 18.40 1. Hole Pitch Platform Length (Newtons) Mass (kg/Att) MAX Solid Bearing Pin A B C D E F H I J K M40 40000 25 70 101 / 110 3.0 14.95 M224 224000 55 140 206 /224 8.04 0.11 0.0 11.04 0.0 9.20 1.0 18.0 18.0 K1 K2 K2 K2 250 315 400 500 250 315 400 500 30.5 K1 K2 K3 K3 63 80 100 125 63 80 100 125 9.0 K1 K2 K3 K3 80 125 160 200 80 125 160 200 14.50 M900 900000 110 280 358 / 393 15.15 M56 56000 30 88 116 / 126 5.10 0.0 65 155 240 60 125 215 300 1.50 0.30 3.0 30.0 18.0 11.50 0.0 50 85 145 30 80 115 175 0.0 9.80 7.0 - 18.0 K1 K2 K3 K3 63 100 125 160 63 100 125 160 11.07 0.65 M315 315000 65 160 216 / 240 10.0 18.0 9.0 11.0 14.0 11.0 18.75 M160 160000 45 124 178 / 193 6.15 M80 80000 35 96 132 / 135 5.50 M630 630000 90 230 302 / 333 12.0 11.0 K1 K2 K2 K2 250 315 400 500 250 315 400 500 24.0 14.65 0.30 I Renold Conveyor Chain Catalogue Conveyor Chain .60 7.0 K1 K2 K2 K2 200 250 315 400 200 250 315 400 18.0 18.0 11.0 35 65 100 30 65 95 130 0.37 0.50 M112 112000 40 110 150 / 164 6.20 0.35 0.11 0. 90 MC224 224000 65 140 206 / 220 8.35 1.85 1.0 K2 K2 K2 125 160 200 125 160 200 11 11 11 50 85 125 75 110 150 0.25 0.0 K2 K2 K2 160 200 250 160 200 250 14 14 14 50 85 145 80 115 175 0.50 MC112 112000 45 110 171 / 186 6.60 0.45 0. Hole Pitch Platform Length (Newtons) Mass (kg/Att) MAX Hollow Bearing Pin A B C (max) D E F I J K MC56 56000 35 88 126 / 137 5.36 0.90 .0 K2 K2 K2 200 250 315 200 250 315 18 18 18 50 100 155 85 135 190 0.Hollow Pin Type Section 1 ISO K Attachments (Welded) Chain Ref Chain No Technical Details (mm) Breaking Load Platform Height Transverse Pitch Width Over Attachment Inner/Outer Attachment Thickness Inner/Outer Attachment Type Attachment Minimum Outer Pitch Attachment Minimum Inner Pitch Outer Holes Diam.Renold Conveyor Chain Catalogue I 31 Conveyor Chain . 0 85.0 200.0 358.0 50.0 100.0 14.078 MC224 M315 M450 M630 M900 244000 315000 450000 630000 900000 200.0 6.0 315.0 125.0 126.0 80.0 0.0 20.0 216.0 0.0 100.0 186.204 0.0 11.0 80.0 220.0 171.0 178.0 137.0 206.0 228.0 75.283 2.0 200.283 M80 M112 MC112 M160 M224 80000 112000 112000 160000 224000 100.0 50.0 5.0 24.0 333.0 132.0 125.0 140.617 .0 35.0 315.0 110.32 I Renold Conveyor Chain Catalogue Conveyor Chain Section 1 ISO F Attachments (Welded) Chain Ref Chain No Technical Details (mm) Breaking Load Minimum Pitch Inner Plate Minimum Pitch Outer Plate Transverse Pitch Attachment Hole Size Width Over Att Outer Plate Width Over Att Inner Plate Attachment Thickness Attachment Face Height Pitch of Attachment (Newtons) Mass Holes Kg ISO F Attachments (Welded) I J K L M N O M40 M56 MC56 40000 56000 56000 80.0 206.0 3.0 6.0 100.0 88.0 193.0 160.0 100.283 0.0 135.0 105.0 250.0 88.0 65.0 125.0 6.0 160.0 9.0 125.0 101.0 180.0 50.085 0.0 200.0 50.324 0.0 65.0 10.0 5.0 224.0 25.0 18.0 230.629 8.0 164.0 125.0 160.0 11.629 1.0 11.0 8.0 200.0 14.0 12.0 96.0 250.0 110.0 125.0 140.0 10.0 18.0 116.0 125.0 18.0 280.0 40.0 125.0 110.0 80.0 302.0 8.0 75.0 0.0 18.0 100.0 85.0 15.0 240.0 124.0 150.0 200.0 126.0 30.0 50.5 5.0 65.0 50.0 70.0 14.0 100.906 3.873 1.0 393.0 50.873 0.0 150.0 255.0 85. 157 M160 M224 M315 160000 224000 315000 L0 L0 L0 113.0 300.0 40.254 0.0 275.0 35.676 * Alternative width available.75 230.0 80.645 M450 M630 450000 630000 L0 L0 173.0 0.0 230.0 450.0 380.0 12.0 0.0 200.0 250.0 50.0 50.0 25.5 30.0 60.0 70.50 430.0 30.0 6.0 255.Renold Conveyor Chain Catalogue I 33 Conveyor Chain Section 1 ISO L Attachments (Integral) Chain Ref Chain No Technical Details (mm) Breaking Load Type Attachment Face Length Width Over Attachment Outer Total Height of Attachment Attachment Thickness Distance of Pitch point to Attachment Face Box Width* (Newtons) lbf Mass (kg) ISO L Attachments (Integral) C D F G H M40 40000 L0 75.0 8.0 10.0 30. .0 60.0 30.0 330.75 134.124 0.0 14.85 180.0 5.0 35.0 40.054 M56 M80 M112 56000 80000 11200 L0 L0 L0 98.70 154.0 1.0 3.0 250.089 0.0 70.65 280.0 350.0 450.0 400.364 0.35 95.0 4.0 30.0 7.60 166.0 100. Please enquire.0 0.0 430.30 104.027 1. 0 125.0 18.0 30.0 M56 MC56 M80 M112 56000 56000 80000 112000 100.0 400.0 15.0 M315 M450 M630 M900 315000 450000 630000 900000 200.0 125.0 200.will be increased pro rata for other types.0 11.0 250.0 MC112 M160 M224 MC224 112000 160000 224000 224000 125.0 250.0 100. Technical Details (mm) Breaking Load Pitch Bush Chain Two Holes Technical Details (mm) Pitch Hole Diameter Pitch* Attachment Hole Hole Diameter (Newtons) MIN MIN One hole Two holes P D P A B M40 40000 100.0 11.0 125.0 80.0 45.0 160.0 200.0 100.0 21.0 250.0 15.0 160.34 I Renold Conveyor Chain Catalogue Conveyor Chain .0 100.0 100.0 315.0 18.0 14.0 9.0 200.0 30. .0 15.0 100.0 63.0 18.0 11.0 24.0 11.0 11.0 500.0 14.0 63.0 315.0 200.0 14.0 18.0 160.0 36.0 160.0 11.Holes in Link Plates Section 1 ISO Attachments Technical Details Chain Ref Chain No.0 125.0 160.0 315.0 21.0 315.0 160.0 21.0 80.0 80.0 25.0 200.0 160.0 * Based on small plain roller . 463 101.300 114.001 88.0 76. of holes Ultimate Strength (Newtons) Bucket Elevator Chain 6956-PB 6867-R 6866-R 6869-R 6969-R 6864-R 6874 6875-R P B E D C G A1 A2 B1 C1 D1 E1 F1 6.0 7.700 12.200 82.600 241.500 60.600 101.875 15.800 228.375 76. Chain Chain No Section 1 Elevator Chain Technical Details (mm) Pitch Inside Width Plate Thickness Plate Height Roller Diam Pin Diam Type of Attachment No.325 60.200 79.900 69.500 60.100 177.250 12. and in these cases we suggest Renold Applications Engineers are consulted before a chain is specified.200 101.600 44.200 76.600 95.475 17.201 330. Where chains are to be used in abrasive and/or corrosive conditions then special heavy duty chains can be produced.450 44.400 25.0 6.250 95.475 17.475 17.475 17.625 63.325 69.0 6.700 12.475 17.325 76.201 342.850 69.400 31.888 355.201 330.200 63.001 381.250 95.750 31.0 7.600 184.300 139.700 88.801 160.250 47. The details of the design of each of these types of elevator can be found in the Designer Guide section.200 76.850 95.875 15.288 17.600 228.0 6.456 94. a few examples of which are shown on the following pages.450 60.500 25.325 63. chains that have been derived from the standard range of products are more than adequate.600 101.600 228.338 330.875 15.850 63.300 228.463 94.875 76. materials.Renold Conveyor Chain Catalogue I 35 Chain is fitted with fillet welded K attachments for the dynamic discharge (centrifugal) elevator and G attachments for positive discharge elevator. It is sometimes necessary to modify the design.750 38.0 6.701 381. or heat treatment of chain when certain aggressive materials are handled.500 94.201 242.750 44.900 114. Renold has been used successfully in elevator applications for many years and it has been found by experience that for most applications.300 101.100 31.0 7.238 381.001 381. are all that is required to produce a hard wearing and long lasting chain.200 76.600 114.450 38.901 330.463 14.700 139.200 17.475 K-24-4 holes K-44-8 holes K-2-4 holes K-44-8 holes K-44-8 holes K-443-10 holes K-443/K-44-10 holes K-443/K-44-10 holes 71174 62278 77402 97865 133452 97865 169039 133452 .550 76.150 304.700 139.001 393.601 249.700 15.875 15. The inclusion of fillet welded K attachments to provide extra attachment strength and smaller than standard gearing rollers to reduce weight. 8 23.0 6.0 38.4 38.0 19.0 66.2 38.0 9.0 61.5 5.0 80.0 25.4 38.9 31.0 26. Series Ref Technical Details (mm) Breaking Load Breaking Load lbf (Newtons) Pitch Inch Pitch Inch Pitch mm Pitch mm Bush Dia Inside Width Inner Inside Width Outer Pin Diam Pin Length MIN MAX MIN MAX MAX MIN MIN MAX MAX Plate Height Width Outer Width Inner Head MAX BS Elevator Chain.0 19.1 8.8 457.4 152.4 38.0 6.3 14. Stainless steel and zinc plated chains are available to order.1 7.S.0 25.0 18.0 6.9 13.0 22.1 29.4 228.0 18.0 46.9 8.1 38.8 88.1 51.8 The dimensions listed will not vary with pitch size for each given breaking load.5 2.0 61.1 38.0 24.1 7.2 609.4 152.8 35.0 60.0 15.0 3.8 3.8 5.1 38.5 3.0 12.8 5. .0 94.0 59.7 34.0 63.4 32.2 457.0 152.0 59.6 7.1 38.6 304.Solid Bearing Pin 3S033 4S067 5S134 6S200 7S267 8S400 7500 15000 30000 45000 60000 90000 33000 67000 134000 200000 267000 400000 A A A A B D E F G H1 J K L 1.6 33.1 15.36 I Renold Conveyor Chain Catalogue Elevator Chain Section 1 BS 4116 Part 4 Chain B.1 25.8 34.0 23.5 43.9 127.0 3. For mass of chains see page 9.0 82.6 10.1 50.6 18.0 29. 5 88.5 10.4 177.0 145/159 6 K2 K2 K2 K2 K2 127.7 - 10.3 152.0 76.1 70 112 152 229 0.0 152.104 0.6 228.1 89 89 152 229 1.193 0.8 88.4 177.5 - 19.8 228.4 101.2 9.163 15000 67000 31.8 - 13.3 76.8 57.8 203.5 31.050 1.6 - 12.2 69.2 31.0 182/200 8 K2 K2 K2 K2 152.9 56 56 84 127 0.905 90000 400000 57.6 127.0 146.2 228.9 165.8 152.5 10.0 152.2 28 56 56 84 0.0 108.2 102/118 4 K1 K1 K2 K2 63.8 57.4 56 84 108 127 168 0.2 12.8 57.7 13.9 133.8 13.2 228.289 0.9 88.4 203.0 10.581 0.6 304.193 0.5 44.9 88.2 228.104 0.9 114.449 0.810 2.581 0.2 88.7 38.050 1.6 304.2 228.6 228.6 127.6 101.7 13.9 88.8 203.6 152.299 0.Renold Conveyor Chain Catalogue I 37 Elevator Chain Section 1 BS K Attachments Technical Details (mm) Breaking Load Breaking Load lbf (Newtons) Platform Height Transverse Pitch Width Over Attachment Inner/Outer Attachment Thickness Inner/Outer Attachment Type Attachment Minimum Outer Pitch Attachment Minimum Inner Pitch Centre Hole Diam Outer Holes Diam Attachment Hole Pitch Platform Length Mass (kg/Att) BS K Attachments (Welded) A B C D E F H I J K 7500 33000 19.5 10.9 114.6 304.2 31.5 19.930 1.4 177.6 - 9.9 165.6 101.6 304.6 228.2 88.2 12.1 76.9 125/136 5 K1 K2 K2 K2 88.2 12.710 .0 171.2 12.054 0.220 1.907 45000 60000 200000 267000 51.5 19.685 0.2 101.443 30000 134000 38.6 228.7 13.5 229/252 10 K1 K2 K2 K2 228.4 203.8 19.5 88. E C K B D G H J A F L Technical Details (mm) Breaking Load Breaking Load lbf (Newtons) Pitch Hole* Diam Horizontal Centres Vertical Centres Flat at top of Attachment Overall Width Chain Plate Depth Overall Depth Pin Projection Plate Thickness Face to Chain Centre Line Mass Each kg BS G2 Attachments (Internal) 7.3 127.55 B D A G Technical Details (mm) Breaking Load Breaking Load lbf (Newtons) Pitch Hole Diam Horizontal Centres Vertical Centres Attachment Width Attachment Depth Projection from chain plate Projection from chain centre Attachment Thickness Mass each kg BS G2 Attachments (Welded) 7.35 9.90 57.0 44.45 0.80 50.61 143.10 31.08 5.91 1.000 45.15 107.41 .10 38.87 13.08 7.0 127.3 114.10 50.10 50.76 16.78 24.000 A B C D E F G H J K L 76.2 101.3 127.30 3.80 1.80 76.35 6.85 57.000 67.35 9.6 152.7 152.35 6.76 16.19 0.96 60.75 4.67 26.69 12.19 0.20 0.50 3.6 152.9 114.80 76.20 88.12 0.4 101.80 3.40 38.50 50.75 38.23 38.75 6.15 57.95 88.75 63.3 114.6 152.2 304.15 57.60 139.16 0.41 130.30 12.34 * Alternatively.40 152.32 20.34 37.000 30.80 63.80 3.87 22.000 200.500 33.80 3.0 44.99 17.40 25.90 88.2 203.94 1.50 0.60 101.75 63.80 3. square holes can be provided Wheels to have shroud removed on one side.30 13.16 31.81 181.05 3.15 57.2 76.29 3.10 38.000 30.76 20.20 76.55 101.000 15.75 31.2 304.0 127.80 4.000 134.13 24.15 57.32 26.69 10.6 101.55 101.80 3.80 60.85 69.10 269.4 203.85 57.35 9.78 17.6 139.94 0.10 14.30 13.92 0.10 31. modifications to design and dimensions can be made to suit customer’s own requirements.67 37.2 203.80 5.60 16.6 152.69 12.15 76.29 0.70 152.15 107.91 1.10 38.000 200.20 88.55 82.69 10.2 101.4 203.000 A B C D E F G H J 76.3 127.13 26.000 134.99 14.500 33.13 24. modifications to design and dimensions can be made to suit customer’s own requirements.95 88.4 165.35 10.9 114.80 25.50 50.96 82.6 114.45 69.29 2.35 7.24 0.20 370.1 165.45 69.8 9.6 114.000 67.60 7.80 3.55 82.30 12.38 I Renold Conveyor Chain Catalogue Elevator Chain Section 1 G2 Attachments Produced to order.4 152.23 1.05 3.20 76.90 57.67 0.28 259.0 82.40 25.0 105.12 0.35 10. E H C F 0.99 14.3 127.31 208.85 69.1 1.20 101.000 15.10 38.87 22.91 2. J Produced to order.75 31.30 12.55 82.2 101.8 9.23 38.51 194.4 152.40 165.000 45.30 3.35 9.19 0.55 82.4 101.80 50.80 50.15 76. 0 12.0 30.0 14.0 153.0 60.0 44.0 16.0 60.0 80.0 73.2 23.0 35.1 64.0 33.0 12. For mass of chains see page 24.0 113.0 38.0 21.0 28.0 7.0 28.0 14.Solid Bearing Pin A A B D E F G H1 J K L M40 40000 63 250 12.0 97.1977.8 97.0 21.0 30.0 6.5 3.0 70.0 15.0 4.0 12.0 32.0 37.6 70.0 82.7 18.4 45.5 55.0 25.0 48. .0 18.0 35.0 120.0 M56 M80 M112 56000 80000 112000 63 80 80 250 315 400 15.0 78.0 56.3 39.0 63.0 50.0 46.7 Dimensions listed above will not vary with pitch size in each given breaking load.0 M160 M224 M315 160000 224000 315000 100 125 160 500 630 630 25.Renold Conveyor Chain Catalogue I 39 Elevator Chain Section 1 ISO . RENOLD A E B D RENOLD C Technical Details (mm) Breaking Load Pitch Pitch Roller Dia Inside Width Inner Inside Width Outer Pin Dia Pin Length MIN MAX MAX MIN MIN MAX MAX Plate Height Width Outer Width Inner Head (Newtons) MIN MAX ISO Elevator Chain .0 29.5 84.0 40.0 8.0 114. DIN8167.5 60.0 6.0 25.0 4.1 M450 M630 M900 450000 630000 900000 200 250 250 800 1000 1000 42.5 30. BS4116 D RENOLD Chain No RENOLD A C Chain Ref.0 66.5 10.3 6.0 10.0 43.0 16.0 3.5 20.0 24.0 50.0 8.0 17.4 54.0 5.0 5.0 36.0 36.0 100.0 133.0 10.5 41.5 15.5 20. Stainless and zinc plated chains are available to order.0 43.0 7.0 52. 11 0.50 M900 900000 110 280 358/393 15.15 M80 80000 35 96 135/147 5.0 K1 K2 K3 K3 80 125 160 200 80 125 160 200 14 14 14 14 14 14 35 65 100 30 65 95 130 0.04 0.30 0.25 0.75 M160 160000 45 124 178/195 6.45 0.60 1.0 K1 K2 K2 K2 250 315 400 500 250 315 400 500 30 - 30 30 30 65 155 240 60 125 215 300 1.80 7.40 1.20 1.35 0.0 K1 K2 K2 K2 250 315 400 500 250 315 400 500 24 - 24 24 24 100 190 300 50 150 240 350 1.70 5.5 K1 K2 K3 K3 63 80 100 125 63 80 100 125 9 9 9 9 9 9 20 40 65 20 40 60 85 0.10 0.0 K1 K2 K3 K3 100 160 200 250 100 160 200 250 14 14 14 14 14 14 50 85 145 30 80 115 175 0.04 0. Chain No Technical Details (mm) Breaking Load Platform Height Transverse Pitch Width Over Attachment Inner/Outer Attachment Thickness Inner/Outer Attachment Type Attachment Minimum Outer Pitch Attachment Minimum Inner Pitch Centre Hole Diam Outer Holes Diam Attachment Hole Pitch Platform Length (Newtons) Mass (kg/Att) ISO K Attachments (Welded) A B C D E F H I J K M40 40000 25 70 104/112 3.60 7.50 9.20 0.40 3.85 M450 450000 75 180 228/255 10.40 2.65 M315 315000 65 160 216/240 10.50 0.0 K1 K2 K3 K3 63 100 125 160 63 100 125 160 11 11 11 11 11 11 25 50 85 25 50 75 110 0.85 1.15 M56 56000 30 88 119/129 5.50 0.40 I Renold Conveyor Chain Catalogue Elevator Chain Section 1 ISO K Attachments Chain Ref.50 M112 112000 40 110 151/165 6.30 3.95 M224 224000 55 140 206/224 8.11 0.65 0.37 0.07 0.0 K1 K3 K3 K3 80 125 160 200 80 125 160 200 11 11 11 11 11 11 11 50 85 125 25 75 110 150 0.0 K1 K2 K2 K2 200 250 315 400 200 250 315 400 18 - 18 18 18 85 155 240 40 125 195 280 0.50 M630 630000 90 230 302/333 12.20 0.0 K1 K2 K3 K3 125 200 250 315 125 200 250 315 18 18 18 18 18 18 65 125 190 40 105 165 230 0.70 4.80 .07 0.0 K1 K2 K2 K2 160 200 250 315 160 200 250 315 18 - 18 18 18 50 100 155 35 85 135 190 0.80 1. Renold Conveyor Chain Catalogue I 41 Elevator Chain Heavy duty elevator chain .711kn breaking load for positive discharge elevator Section 1 Heavy Duty Elevator Chain .378kn breaking load for dynamic discharge elevator Heavy duty elevator chain . 875 12.100 38.225 25.760 4.988 34.275 41.900 62.200 76.670 153.251 7.200 153.275 41.600 101.911 27.400 25.713 82.150 57.000 6.050 6.575 28.911 4.994 40.725 85.000 6.450 44.700 28.125 117.875 9.225 44.275 41.569 56.855 23.084 40.575 31. Steels of medium carbon grades are used for pin and plates and may be heat treated to produce greater strength and wear resistance.525 9.550 88.550 82.800 50.200 85.497 22.353 20.744 56.400 28.241 20.204 12.275 44.275 41.200 103.116 38.275 41.000 6.525 9.275 41.897 63.275 41.700 9.400 152.500 63. automated machine welding and assembly of the bushes to side plates ensures high quality and dimensional control.515 29.150 41.855 24.600 103.625 57.050 19.356 51.744 62.450 76.025 73.750 36.075 3.050 6.578 56.606 55.450 44.150 57.000 4.081 40.050 19.275 73.575 28.670 103.800 57.105 152.100 38.442 13.700 15.925 22.788 76.800 50.105 101.350 14.275 41.500 63.475 57.200 111.125 111.025 73.800 50.269 78.744 49.100 38.566 80.050 6.050 6.225 22.670 153.700 12.606 49.216 74.050 12.105 78.000 6.700 12.225 26.225 22.100 38.350 6.875 15.700 12.753 56.022 29.700 12.075 3.075 6.920 22.081 89.438 71.400 152.050 22.575 69.275 47.700 14.275 41.219 80.275 41.400 25.750 31.963 80.800 63.670 153.670 2.670 153.050 19.600 101.972 9.500 59.251 6.353 12.753 56.500 63.575 28.500 63.150 63.700 12.050 19.694 50.219 80.475 117.025 41.674 12.600 153.200 76.525 9.450 44.706 62.920 24.700 12.875 15.025 73.513 41.674 9.022 12.097 9.925 34.025 73.275 41.475 117.670 153.219 74.750 31.850 69.288 19.275 41.050 6.475 76.575 31.119 76.800 50.200 103.200 153.050 19.991 51.525 12.956 74.075 4.288 28. Accurate punching of the plate.063 4.275 41.050 3.269 66.525 9.525 9.550 92.959 55.744 63.063 6.100 38.641 49.350 9. Technical Details (mm) Chain No Pitch mm Pitch inch Mass Average Ultimate Strength kg/m (Newtons) Pin Diameter Sprocket Thickness Plate Thickness Plate Height Bush Diameter CL to Pin Head CL to Pin End Outside Width at Inner Plate MAX Permaweld W W-78 W-78P W-82 W-82P W-82XHD W-106 W-106P W-106HD W-110 W-110P W-111 W-111P W-124 W-124P W-124HD W-124HDP W-132 W-132P W-132HD W-132HDP W-134 W-134P WS-150 WS-150P WS-157 WS-157P W-182 WS-784 WS-784P WS-855PB P P 66.972 12.42 I Renold Conveyor Chain Catalogue Welded Steel Chain Section 1 Type W Permaweld chains are normally of cranked link construction.400 152.988 26.900 101.907 56.131 63.050 6.525 12. Chain Ref.000 4.116 36.925 31.750 41.609 49.050 6.700 12.500 71.063 6.609 2.575 63.075 50.050 19.050 4.575 28.525 9.200 76.575 28.400 25.500 63.100 28.204 9.525 6.288 14.450 77.450 36.241 19.900 88.275 41.000 4.525 9.500 38.534 106762 133452 115658 155694 204626 164591 260231 222420 204626 266904 204626 266904 204626 266904 373665 400356 373665 444840 467082 533808 458185 498221 373665 444840 556050 622776 204626 106762 133452 667260 A D E F H J K B 12.750 31.442 7.466 36.975 42. Bushes are of carburizing grades of carbon steel which may be case hardened.575 28.670 78.725 71.606 56.050 19.100 38. thus eliminating unnecessary wear due to pin movement.259 43.400 152.081 43.438 71.025 69.150 50.713 .275 41.119 36.713 82.350 6.350 6.275 41.744 74.050 19.925 34.063 4.497 19.400 120.700 12.100 38.200 111.609 3.400 25.500 22.403 40.575 28.750 38.670 153.125 117. The pins have a press fit into the side plates.275 73.515 23.513 36.900 120.350 6.800 50.075 92.575 19.353 4.800 112.700 15.800 50.744 56.800 50.850 28.100 38.134 59.050 19.760 4.497 38.100 50.450 34.994 56.850 6.400 25.400 25.000 6.706 62.204 12.000 4.125 111.625 47.100 38.225 22.105 78.400 25.256 53.506 45.550 82.750 31. 050 19.057 90.881 154.4 152.526 263.0 8.385 154.400 161.800 113.2 203.526 263.4 203.450 27.255 31.939 26.2 203.369 156.0 8.2 203. Bushes are of carburizing grade steels which are case hardened on the heat treated chains.250 222.894 83.010 202. The bushes are shaped to provide maximum conveying capacity.013 181.851 323.225 22.0 76.244 147.763 181.525 9.225 22.800 50.225 22.850 136.576 282.100 38.0 8.050 19.469 194.050 19.903 113.851 330.382 154.201 222.100 44. Accurately punched holes and assembly procedures ensure dimensional control.2 203.351 323.463 196.047 121.201 .100 38.525 263.2 203.363 188.382 202.2 76.369 156.526 358.0 3.576 282.450 50.869 150.201 330.250 222.0 127.478 11.525 9.074 13.2 203.771 25.700 12.700 12. The flexibility of welded construction provides a wider range of attachment links than is normally offered for similar cast chains.400 25.478 15.2 203.600 228. Pins and side plates are made of medium carbon steels.119 188.0 3.525 136.700 12.800 50.700 12.771 22.544 20.544 13.925 104.0 5.985 20.Renold Conveyor Chain Catalogue I 43 Welded Steel Chain Section 1 Type WD Type WD Permaweld drag chains are furnished with heat treated pins and formed steel bushes.800 50.013 150.351 260.113 121.2 203.2 76.250 282.980 31.800 50.741 83.385 154.525 9.744 147.100 38.769 181.363 156.525 9.2 76.0 8.600 228.576 282.758 11. Technical Details (mm) Chain No Pitch mm Pitch inch Mass Average Ultimate Strength kg/m (Newtons) Pin Diameter Sprocket Thickness Plate Thickness Plate Height CL to Pin Head CL to Pin End Outside Width at Inner Plate MAX Permaweld WD WD-102 WD-102P WD-104 WD-104P WD-110 WD-110P WD-112 WD-112P WD-116 WD-116P WD-120 WD-120P WD-122 WD-122P WD-480 WD-480P WD-480HP WD-480XHD WD-480XDHP P P 127.050 19.0 8.576 9.776 260.775 228.201 330.2 5.250 222.800 50.050 22.525 9.525 9.241 147.0 6.2 203.0 8. Chain Ref.0 8.0 8.758 16.600 228.600 330.700 12.050 19.525 9.851 323.700 12. shock resistance.255 226868 266904 226868 266904 226868 266904 226868 266904 226868 306940 311388 400356 311388 400356 311388 400356 449288 378114 542705 A D E F J K X 19.525 9.850 196.351 260.875 15.074 16.241 147.100 38.0 8.985 26.866 194.225 22.0 3.763 188.925 161.113 194.007 156.244 194.050 19.050 19.400 25.939 22.351 260.225 25.0 8.525 9.776 358.100 38.2 152. toughness and higher yield strength in bending than many comparable cast and other welded links.019 150.800 50.800 50.885 90.013 150.0 6.0 15.875 38.050 19.113 188.450 25.050 19.576 282.100 38. Precise press fits of the pins in the side plates and single flats milled on the pin ends prevent unnecessary wear due to pin movement.800 50.700 15.525 12.0 3.0 8.2 203.100 38.225 22.526 263.119 188.775 104.450 44. 70 34.0 .60 19.20 26. Chain Number Technical Details (mm) Pitch Inch Inside Width Roller Dia Pin Dia Over Pin Plate Height Breaking Load kN ISO 487 Chain S32 S42 S45 S52 S55 S62 S77 S88 CA550 P A C D F G 1.10 18.20 19.10 38.44 I Renold Conveyor Chain Catalogue Agricultural Chain Range Section 1 ISO 487 Chain Ref.30 17.70 4.19 26.80 19.74 5.74 5.63 1.3 32.40 22.20 15.50 1.63 15.74 8.01 5.63 1.30 17.65 2.23 22.80 17.40 14.10 38.1 45.92 8.375 1.10 22.9 34.297 2.15 1.23 28.609 1.00 13.9 32.80 36.20 17.50 19.30 22.47 7.10 40.90 16.9 32.81 11.60 43.30 17.27 15.90 19.0 42.7 56.30 38.23 25.23 22.1 56.30 All chains are electroless nickel plated 20.74 5.20 50.30 26.92 7. 5 11.4 11.1 49.6 76.0 74.8 55.0 38.8 54.8 54. Section 1 K Attachment and M Attachment M ATTACHMENT Technical Details (mm) Chain No Transverse Pitch Overall Width Platform Height Hole Width Hole Length B A H E F 42.8 24.0 11.0 101.0 77.0 11.4 20.3 43.4 17.0 74.5 8.0 58.6 36.9 54.7 6.2 74.6 19.3 8.9 11.0 M Attachments S32 S42 S45 S52 S55 S62 S77 S88 .5 8.0 60.35 8.5 10.5 K Attachments S32 S42 S45 S52 S55 S62 S77 S88 CA550 Chain Ref.4 8.5 14.0 11.5 8.5 14.5 8.5 8.8 22.3 8.0 54.5 8.5 8.5 10.5 10.Renold Conveyor Chain Catalogue I 45 Agricultural Chain Range K ATTACHMENT Chain Ref.1 12.3 8.4 11.1 19.1 30.0 11. Technical Details (mm) Chain No Attachment Height Hole Centre Hole Width Hole Length B A E F 26.5 11.0 71.5 8.3 8.8 20.6 30.0 31.8 12.8 11.2 96.3 8.0 119.4 11.3 23.6 14.0 95.0 66.7 11.7 6.5 8.0 34.5 10.3 8.5 6. When keyways are requested.0 41.44 5.0 41.5 2.99 5.39 135.30 207.67 5.0 32.39 94.D.44 6.0 31. No.19 364.0 41.0 41. Sprockets can be modified on request.59 94 103 113 122 140 149 159 177 261 288 325 19 19 19 24 24 24 38 38 38 38 45 45 45 45 50 50 50 64 70 70 70 76 76 76 76 89 89 89 41 41 41 41 41 41 41 41 51 51 51 38 38 38 38 38 38 38 38 44 44 44 31.98 13.08 5.47 1.0 41.09 448.5 41.51 103. Sprockets for other sizes of chain .29 3.95 3.15 A C Dc D D E Fc F H 281093* 281094* 281096* 281099 281102 281108 281110 281112 121.27 140.0 41.5 41.98 10.38 2.73 168.36 1.40 123.0 31.44 5.0 32.85 131.0 31.0 31.62 396.26 195.0 32.5 41. S32 9 10 11 12 14 15 16 18 27 30 34 A C Dc D D E Fc F H 85.34 219.0 41.0 41.0 31.0 41.99 5.14 238.46 I Renold Conveyor Chain Catalogue Agricultural Chain Section 1 Standard Sprockets Chain Ref.61 4.0 41.23 147.5 48.54 4.41 328.22 159.72 134 147 173 212 252 370 409 462 19 19 24 24 24 24 24 28 28 28 50 50 50 60 60 65 65 70 89 89 89 102 102 108 108 121 54 54 54 57 57 64 64 70 51 51 51 51 51 57 57 64 41.22 251.97 199.59 2.0 2. large sprockets are faced both sides of the boss .68 112.89 14. .44 A C Dc D D E Fc F H 281123* 281124* 281125* 281126* 281127* 281128* 281129* 281130 281131 281132 281138 281140 281142 111.C.84 3.49 149. S52 9 10 11 12 13 14 15 16 17 18 27 30 34 For Chain No.49 412. Top Diam Bore Stock Cast Bore Machined Bore Machined MIN MAX Boss Diam Boss Length Cast Boss Length Machined Chain CL from Boss Face when Machined Weight (Cast Bore) kg For Chain No. P.21 171. of Teeth Technical Details (mm) Part No .90 9.49 2.38 2.0 31.13 1.61 279.0 41. S45 9 10 12 15 18 27 30 34 * Small solid sprockets.0 41.93 125 136 148 161 172 184 197 209 220 233 341 378 426 19 19 19 24 24 24 24 24 24 28 28 28 48 50 50 50 50 60 60 60 60 60 65 65 70 83 89 89 89 89 102 102 102 102 102 108 108 121 54 54 54 54 54 54 54 57 57 57 64 64 64 51 51 51 51 51 51 51 51 51 51 57 57 57 41.0 1.22 183.43 356.0 31.15 2.0 41.small solid sprockets are faced on boss side only.07 9.08 4.63 4.45 316.99 159.51 281063* 281064* 281065* 281066* 281068* 281069* 281070* 281072 281078 281080 281082 For Chain No.0 41.details on request.0 41. Other sprockets available on request.58 9.06 133.29 4. 5 46.0 46.64 148.03 7.05 .0 46.70 14.26 7.details on request.29 4.0 46.I 47 Renold Conveyor Chain Catalogue Agricultural Chain Section 1 Standard Sprockets Chain Ref.D. of Teeth Technical Details (mm) Part No .58 7.01 400.34 201. Sprockets for other sizes of chain .16 12.06 19.35 361.0 46.0 46. S62 9 10 11 12 13 14 15 16 17 18 27 30 34 281153* 281154* 281155* 281156* 281157* 281158* 281159 281160 281161 281162 281168 281170 281172 A C Dc D D E Fc F H 122.99 5.0 * Small solid sprockets.31 4.71 8.09 241. Other sprockets available on request. large sprockets are faced both sides of the boss . No.0 46.small solid sprockets are faced on boss side only.0 46.57 214.77 161.44 6.53 135. 3.93 175.13 188.0 46. P.12 6.C. Sprockets can be modified on request.0 46.0 46. Top Diam Bore Stock Cast Bore Machined Bore Machined Boss Diam Boss Length Cast Boss Length Machined Chain from Boss Face when Machined Weight (Cast Bore) L C kg MIN MAX For Chain No. When keyways are requested.23 135 149 162 175 188 201 215 228 241 254 374 414 467 19 19 19 19 24 24 24 24 24 24 24 28 28 28 50 60 60 60 60 65 65 65 65 65 70 70 75 89 102 102 102 102 108 108 108 108 108 121 121 133 60 60 60 60 60 60 64 64 64 64 70 70 76 57 57 57 57 57 57 57 57 57 57 64 64 70 46.94 454.5 53.83 228. 48 I Renold Conveyor Chain Catalogue Section 2 Conveyor Sprocket Details . 27 199.5 9. CL of Tooth to End Face* Distance Through* Weight Approx kg 12.0 1. Shroud Diam. 13000 Newtons Breaking Load Sprocket Ref.74 196.51 392. MIN MAX Boss Diam.5 38 45 45 51 51 51 A C G J D D E H F 99.8 3.5 9.5 9.7 7.1 2.11 294.8 3. Shroud Width Bore Diam.56 105 157 142 207 208 306 274 404 156 150 250 212 345 19 19 19 19 19 16 16 24 24 24 24 24 24 32 38 38 45 45 45 45 50 57 76 76 89 89 89 89 102 9.5 9.9 25.22 132. Bore Diam. * After machine facing the boss.0 12.41 109 157 142 207 208 305 156 150 250 19 19 19 16 16 24 24 24 24 32 38 38 45 45 45 57 76 76 89 89 89 9.0 76.1mm Diameter Roller 1.5 9.57 147.9 2.2 4.5 9.8 3. of Teeth Renold Part No.4mm Diameter Roller 1.0 50. Boss and Distance Through dimensions may vary.9 3.22 132.5 38.5 9.5 9.27 199.0 50.9 3.1 2.57 147.5 38 45 45 51 51 51 51 64 0.0 101.2 8 12 8 12 8 12 208121# 208125# 208212# 208216# 208391# 208395# A C G J D D E H F 99.5 9.0 76.5 9.5 9.7 7.5 38.Renold Conveyor Chain Catalogue I 49 Standard Conveyor Sprockets Section 2 To Suit BS4116 Part 4 3000 lbf. 0.11 294.41 265.6 8 12 8 12 8 12 8 12 208151## 208155## 208241## 208245## 208422## 208426## 208501## 208505## # Sprockets with cut teeth ## sprockets with cast teeth.74 196.2 . PCD Top Diam.8 3.5 9.9 2. Pitch Inch Technical Details (mm) Pitch mm No. please call to discuss your requirements.9 7.0 1. 20000 Newtons Breaking Load Sprocket Ref.5 12.78 392.6 13.2 4. PCD Top Diam.5 38 45 45 51 51 51 0.22 132.5 12.4 8 12 8 10 12 8 10 12 8 12 200121## 200125## 200302## 200304## 200306## 200392## 200394## 200396## 200571## 200575## A C G J D D E H F 132.3 5.50 I Renold Conveyor Chain Catalogue Standard Conveyor Sprockets Section 2 To Suit BS4116 Part 4 4500 lbf. Bore Diam.7 7.74 196.5 9.0 8. of Teeth Renold Part No. Boss and Distance Through dimensions may vary.6 6.58 294.8 3. kg 2. CL of Tooth to End Face* Distance Through* Weight Approx MIN MAX 6000 lbf.11 294.0 1. of Teeth Renold Part No.5 12.0 101. Shroud Diam.5 12.5 9.5 12.0 50.2 . Pitch Inch Technical Details (mm) Pitch mm No.9 2.27 199.5 9.5 12.5 9. Boss Diam.0 50. Pitch Inch Technical Details (mm) Pitch mm No.8 3.5 12.2 8 12 8 12 8 12 208151## 208155## 208241## 208245## 208422## 208426## A C G J D D E H F 99.8 3.9 3. 27000 Newtons and 7500 lbf.0 76.5 9.5 12.11 246.56 398.9 Shroud Width Bore Diam.4mm Diameter Roller 1.57 147.5 51 51 51 64 64 64 64 70 70 76 ## Sprockets with cast teeth. Bore Diam.7 34. CL of Tooth to End Face* Distance Through* Weight Approx kg 25.41 105 157 142 207 208 306 156 150 250 19 19 19 16 16 24 24 24 24 32 38 38 45 45 45 57 76 76 89 89 89 9.4 8. PCD Top Diam.1 2.8 16.74 196.41 265.0 76. please call to discuss your requirements.6 10.25 588.5 12.1 19.5 38. * After machine facing the boss. 33000 Newtons Breaking Load Sprocket Ref.51 328. Shroud Diam. Shroud Width Bore Diam.27 199. MIN MAX Boss Diam.4 5. 2.0 152.82 144 212 215 264 314 281 347 411 414 608 193 243 204 272 338 326 527 25 25 25 25 25 25 25 24 24 24 28 28 35 35 38 38 38 38 50 50 65 65 65 65 70 70 75 76 102 102 114 114 114 114 127 127 133 12. CL of Tooth to End Face* Distance Through* Weight Approx MIN MAX 24000 lbf.0 76.4 15.11 294. PCD Top Diam.6 31.25 588.4 8 12 8 12 8 12 201211## 201215## 201301## 201305## 201481## 201485## A C G J D D E H F 199. Boss Diam. Bore Diam.82 218 318 286 415 418 612 230 192 325 314 514 32 32 32 32 32 38 38 38 48 48 48 70 75 70 80 80 90 114 133 127 140 140 165 16 16 16 16 16 16 70 76 70 76 76 89 8.0 101.6 6.2 21.82 290 420 423 617 312 301 502 38 38 38 48 55 55 60 85 95 95 110 152 165 165 196 19 19 19 19 83 95 95 130 ## Sprockets with cast teeth. MIN MAX Boss Diam. of Teeth Renold Part No.4 8 12 8 12 202121## 202125## 202301## 202305## A C G J D D E H F 265. Shroud Diam.Renold Conveyor Chain Catalogue I 51 Standard Conveyor Sprockets Section 2 To Suit BS4116 Part 4 12000 lbf.0 .3 Shroud Width Bore Diam.9 20.5 41. of Teeth Renold Part No. 134000 Newtons Breaking Load Sprocket Ref. Boss and Distance Through dimensions may vary. kg 4. PCD Top Diam.51 392. Pitch Inch Technical Details (mm) Pitch mm No.2 63.56 398.0 10.0 101. * After machine facing the boss. Pitch Inch Technical Details (mm) Pitch mm No.6 6. Bore Diam.41 265. CL of Tooth to End Face* Distance Through* Weight Approx kg 3.51 392. Shroud Diam.0 152. please call to discuss your requirements. Shroud Width Bore Diam.25 588.56 398. 54000 Newtons and 15000 lbf. 107000 Newtons and 30000 lbf.2 4.3 32.0 152. 16. 67000 Newtons Breaking Load Sprocket Ref. 52 I Renold Conveyor Chain Catalogue Section 3 Industrial Applications & Special Engineered Chain Renold Conveyor Chain Catalogue I 53 Automotive Manufacturing Industry Section 3 Final Assembly Conveyor Water Test Station Conveyor Renold currently manufacture a range of chains that have been tailored for the specific needs of the automative manufacturing industry. The chains used range from the British Standard and ISO Standards, adapted standard chains and in some cases chains specifically designed for particular applications. The special environments range from assembly conveyors - some incorporating assembly jigs to water test and oven chains for the drying of body coatings. 54 I Renold Conveyor Chain Catalogue Automotive Manufacturing Industry Section 3 Assembly or Drying Oven Conveyor Assembly or Drying Oven Conveyor 19.05 WCC-5 76.2 152.4 PITCH 25.44 44.45 WCC-5B TOP ROLLER VERSION 152.4 PITCH 80.77 36.93 67.46 7.94 50.8 Dia 63.5 7.94 17.46 Dia 43.84 7.94 7.94 33.02 63.5 Dia Renold Conveyor Chain Catalogue I 55 Special Double Strand Conveyor Chain is designed to give an enhanced chain life in the hot and dusty conditions of a Cement Clinker. Flow Chart - Cement Works Section 3 Cement Industry from a 60 ton dumper truck.e. The chains used are either to ISO or German DIN standards.56 I Renold Conveyor Chain Catalogue Cement Industry Raw Material Reclaim Conveyors These are situated in the raw material store. rail dia. have to be of extremely robust construction. often abrasive in character. which is usually a belt conveyor. Apron Feeder Conveyors These conveyors are usually situated under hoppers. Because of the arduous duty these chains are usually quite high breaking load (i. Section 3 The reclaimer conveyor is usually a twin strand scraper conveyor with the bottom strand used to scrape the raw material from the pile to a collection point. and are used to control feed material from the hopper for process i. The raw material stores are either circular buildings around which the material is piled.e. Max. and in large pieces up to 5 tons. 500 KN +). Usually a layer of material is left on the conveyor so that when a further load is dropped. . In these circumstances all components. particularly the chains. The conveyor consists of two or more strands of solid bearing pin chain bolted to heavy cast or fabricated apron slats. Material can be loaded into the bunker from an appreciable height straight onto the conveyor. Apron feeders are frequently called on to handle heavy bulk material in large pieces. Clay/Limestone Store showing stacker and reclaimer. Their function is to move the raw material to a distribution conveyor. or long rectangular areas down which piles of material are kept. to a crusher. the original material acts as a cushion for the conveyor. They are driven at a very slow speed intermittently to ensure regulation of material flow. such as limestone rock. i. 88m.e. capacity 43000 tonnes. With over 40 years' experience of supplying the industry. bus terminals and ferry ports are conveying an ever increasing number of people. Specific customer requirements for factory lubrication. For specific design details on new or existing applications. BS 5750/ISO 9002 approved Supplier to major European escalator manufacturers Stores Type Chain Proven performance Technical innovation and product development Applicational back-up Worldwide distribution . The introduction of large shopping malls. Section 3 Renold has manufactured and supplied several hundred thousand metres of escalator chain to manufacturers and end users of this precision product. Renold is recognised as one of the world's leading manufacturers of escalator chain.Renold Conveyor Chain Catalogue I 57 Escalator Chain Chain Life Product Range The extensive Renold step chain product range covers low rise stores types. also available to both British or American standards. train stations. Shown here are some examples of Renold step chains. Packaging Whether for on-site replacement or factory assembly. fitted as original equipment on many escalators. heat treatment and maximum bearing surfaces is used to produce a durable and reliable chain for most operating environments. metro links. resulting in a longer chain life. Reduced maintenance options are available for some of these chains. Renold step chain is designed for extended trouble-free life to meet the demands of the industry. both grease and oil. Computer controlled matching and pairing ensures better gearing. with the chains clearly identified in paired handling lengths ready for installation. Step Pitch Accuracy Renold escalator step chains are manufactured to exact specifications. Renold transmission chains. product quality monitored to ISO9002 / BS5750 standards and statistical process control (SPC). lower friction. Renold escalator chains have been designed using advanced CAD techniques to meet these new demands. Chain Performance Product Development The optimum combination of materials. Transmission Chain With safety factors that meet or exceed the standard. reduced wear and low levels of noise. can be included in the chain specification. contact our technical sales staff. all step chains can be packaged to allow for special storage or unusual transport arrangements. ever larger office blocks and leisure complexes set new standards for the escalator manufacturer with reduced opportunities for maintenance. Heavy Duty Chain Lubrication All step chains are lubricated and protected against corrosion. ready for assembly into new or existing escalators. Escalators in airports. medium to high rise public service escalators and moving walkways. • Cleaner environment because of reduced free grease lubrication.WHOLE LIFE COST BENEFIT . RENOLUBE The Renolube polymer bush and bearing pin assembly. as one of the world's leading manufacturers of escalator chains. Renold is recognised. Environment and Safety The elimination of copious amounts of lubricating oils and grease creates a cleaner and safer environment. has been formulated to ensure maximum lifetime operation. • Stable and predictable wear rates are a particular feature of Renolube when compared to conventionally greased chains which are prone to random failure. Economy Renolube offers a fully cost effective solution when replacing grease lubrication systems by considerably reducing expensive maintenance and life cycle costs. REDUCED MAINTENANCE . with over 40 years' experience. TYPICAL WEAR/LIFE Endurance Renolube Escalator Chain in the public service environment has proven to be extremely wear resistant. in conjunction with a specially designed bearing pin. The Renolube composite polymer bush. thereby reducing fire risk. Installation of the Renolube Escalator Chain provides lifetime confidence with a chain design life of over 40 years.58 I Renold Conveyor Chain Catalogue Renolube . The principle advantages are:- • Substantially lower life cycle costs with development and field tests indicating a life in excess of 40 years.Escalator Step Chain Section 3 Renolube Escalator Chain has been developed as a result of extensive prototype testing in arduous applications to exceed the industry's ever increasing demand for lower service costs and longer lifetime operation. • Significantly lower service costs in that periodic grease lubrication is not required. Precise pitch control ensures excellent gearing with chain wheels resulting in improved performance. Robust bush with keyed feature to prevent distortion during assembly ensuring excellent concentricity. . Substantial diameter rollers coupled with a large bush diameter to reduce bearing pressure and improve wear performance. Special Design Features Section 3 Correct chain selection is essential for optimum performance. Large diameter deep case hardened bearing pin with softened ends and all round riveting for additional security. The Renold large pin diameter increases the bearing area thus reducing bearing pressure and prolonging chain life. New material specification for increased strength with significant increase in chain breaking load. Bush projection designed to reduce friction between the inner and outer plates and maintain clearances during operation allowing efficient lubricant penetration. Optimum heat treatment processes on pin. Renold’s experienced sales.Renold Conveyor Chain Catalogue I 59 Palm Oil Industry Renold . bush and roller for greater wear resistance. When reliability is paramount. choose Renold.ultimate design Renold have enhanced the specifications of its new range of chain to surpass the increasing demands of today and tomorrow. production and design staff are always available to advise on particular products and applications. Tightly controlled plate production methods resulting in the optimum interference fits for increased fatigue resistance. 50 1.6 47.00 2.00 1.22 11.00 38.6 152.91 13.50 2.7 66.625 2.75 2.75 1.91 Premier Extra Chain Ref.0 25.75 1.00 1.0 0. Roller Dia Breaking Load Pitch inch mm A A lbf Newtons Inside Width Plate Depth Hollow Pin Bore Dia Pin/Bush Bearing Area sq inch sq mm Mass kg/m inch mm inch mm inch mm inch mm B B C C D D E E Solid Bearing Pin X62161 4.00 38.4 101.6 152.0 25.625 3.7 1.875 1.4 24000 50000 107000 222000 2.875 2.2 20.50 1.625 47.1 23.6 152.7 88.4 25.0 6.15 Hollow Bearing Pin S05161 4.75 603 603 1128 1128 6.79 0.4 25.74 10.43 5.6 66.1 38.8 50.4 152.1 50.2 20.00 1.22 11.7 0.00 1.00 2.875 1.4 152.4 18000 18000 32000 32000 50000 80000 80000 142000 142000 222000 1.1 20.18 Premier Chain Ref.75 603 603 1128 1128 6.875 2.50 2.75 2.79 20.94 0.50 19.8 - - 0.00 1.875 2.1 0.4 26000 26000 50000 50000 116000 116000 222000 222000 1.1 1.0 E45242 6.91 12.4 101.18 Hollow Bearing Pin E05161 4.1 50.8 0.75 1.00 2.4 1. Breaking Load Pitch inch mm lbf Newtons A Roller Dia Inside Width Plate Depth Hollow Pin Bore Dia Pin/Bush Bearing Area sq inch sq mm Mass kg/m inch mm inch mm inch mm inch mm B B C C D D E E A Solid Bearing Pin E45161 4.0 X02242 6.0 X62241 6.6 152.0 X62242 6.8 50.88 603 603 1128 1128 1856 6.00 50.625 66.1 0.875 1.50 2.0 19.875 2.75 0.6 101.0 X62162 4.0 101.94 1.0 19. inch Roller Dia Breaking Load Pitch mm lbf Newtons A Inside Width Plate Depth Hollow Pin Bore Dia Pin/Bush Bearing Area sq inch sq mm Mass kg/m inch mm inch mm inch mm inch mm B B C C D D E E A Solid Bearing Pin S45161 4.91 For standard range of K attachments see page 14.7 66.50 1.4 1.00 1.75 1.4 17000 36000 36000 76000 160000 160000 1.7 66.00 38.00 2.875 2.8 0.0 S05242 6.75 1.6 47.0 19.00 19.24 14.00 25.75 1128 1128 12.0 25.75 1.0 25.9 0.24 14.4 101.0 101.4 38.74 10.8 61.00 19.0 101.4 25.50 19.625 2.4 30000 30000 60000 60000 134000 134000 267000 267000 1.60 I Renold Conveyor Chain Catalogue Palm Oil Industry HOLLOW BEARING PINS SOLID BEARING PINS D RENOLD D RENOLD RENOLD A A E B RENOLD C C Standard Section 3 Chain Ref.94 0.625 2.94 1.1 38.18 Hollow Bearing Pin X02161 4.75 1.0 S45241 4.7 0.4 38.00 2.6 152.9 0.1 38.4 25.6 101.24 14.1 50.4 2.7 88.18 24.6 66.91 12.00 2.4 25.79 13.8 50.88 603 1128 1128 1856 5.94 1.4 25.6 152.1 20.0 E45162 4.8 50.40 38.94 0.75 1.75 0.50 2.6 152.52 0.4 15000 26000 26000 44000 67000 116000 116000 196000 1.79 0.0 25.0 S45162 S45242 6.8 61.0 E05162 4.7 0.625 2.94 1.91 22.75 603 1128 1128 5.79 0.0 S05162 4.7 66.75 1.8 - - 0.50 47.6 66.75 0.6 152.0 101.1 1.7 66.6 66.1 50.52 0.500 47.1 50.1 1.22 11.8 50.00 19.625 3.79 0.7 66.74 10.94 1.40 38.0 E45241 6.00 1.0 E05242 6.00 2.625 47.6 152.4 1.75 1.43 5.1 20.8 50.0 S05243 6.6 66.625 47.0 101. .43 5.75 1.00 1.50 2.0 - - 0.00 2.625 2.0 S45243 6.625 2.6 47.0 101. 200. breaking load conveyor chains.Renold Conveyor Chain Catalogue I 61 Section 3 Steel Industry Tube Manufacture Raw Material Processing • • • PRODUCT No. A bucket elevator type bush chain 7.300mm can be accommodated. Two strands of conveyor chain fitted with combination cradle and pusher attachments are used. • Earlier in the system a similar chain handles the tubes as they pass through the bore grinding process.0" pitch. Headed pin design to enable detachability flatted pins and bushes for security. A conveyor for delivering spun cast iron pipes after normalising bore grinding and inspecting.0" pitch. • Tube bore sizes from 80 . . 45. 179936 • Conveys raw material. • 6.000 lbf.000 lbf breaking load integral K3 attachment plates. 30. Special pusher attachment plates at suitable spacings to push steel sections along skidder bars or plates. • Chain equipped with flanged outboard rollers both sides at every pitch to run in channel support rails. Transfer Chain for Steel Mill Use • • • CHAIN NO: 179 701/90 PITCH: 12.000 lbf breaking load bush chain fitted with large diameter plain outboard rollers on alternate sides.0 IN BREAKING LOAD: 90.000 LBF (400000 N) . 178289 • Steel coils on skids are handled on a twin strand system moving on the outboard rollers at twice the speed of chain. Base chain 3" pitch.62 I Renold Conveyor Chain Catalogue Steel Industry Section 3 Coil Handling • • PRODUCT NO. Renold have supplied large volumes of 3/4" pitch standard transmission chain for sugar beet harvesting machine OEMs following intensive field trials. Chain for this industry are specially engineered to suit the conveyor application within each manufacturing process. Renold manufacture a wide range of special conveyor chains for this industry. When visiting a sugar beet plant. A typical sugar beet processing plant is shown above.Renold Conveyor Chain Catalogue I 63 Sugar Beet Industry Section 3 Technical Data Chains for the Sugar Beet Industry Product Description The sugar beet industry. . washing and diffuser processes within a sugar beet plant. like the more widely known sugar cane industry. The pitch size is normally in millimetres and the chains incorporate a number of different attachments. Our technical staff can help with the identification or advise on the interchangeability of a Renold chain within a sugar plant. uses many different chains in the manufacture of crystallised sugar used in most households around the world. Due to the arduous nature of the application they are changed after every season. Within these areas there are around eight different conveyor chains currently in use and these are detailed later. fixing holes and special pins. drives of different sizes are also found driving these conveyors. Chain is found in reception. 64 I Renold Conveyor Chain Catalogue Sugar Beet Industry Section 3 Beet Conveyor Reception area: An inclined conveyor which carries the beet from the beet slab to the beet washer. . Rock Catcher Washing area: This chain is used to carry away stones removed during the washing of the sugar beet. The chain is an integral component within conveyor. Scalding Tub Diffuser area Sugar Beet Diffuser Diffuser area: Used on a continuous sugar beet diffuser. Two chains run in parallel connected by perforated steel slats forming a continuous apron.Renold Conveyor Chain Catalogue I 65 Sugar Beet Industry Diffuser area: These chains are fitted with rakes and run in inclined conveyors. Section 3 Cossette Conveyor . scraping the beet pulp to the scalding tub. Feed Conveyor Diffusion area: This chain carries beet pulp to the drying kilns. removes this trash from the water and the washer. Hydro Trash Catcher Washing area: This chain is used to convey the beet through a washer. . fitted with rakes.66 I Renold Conveyor Chain Catalogue Sugar Beet Industry Section 3 Trash Catcher Washing area: Within the washer a water flume carries away grass washed from the sugar beet. The chain. This chain is interchangeable in all respects with corresponding products supplied to the Cane Sugar Industry by other established manufacturers.53 13.2 111.2 R.2 111.05 9. R. Distance from pitch point mm. attack the chain by corrosion and abrasion. mm.85 28. Hole centres mm. A B C D E F G H J K L Approx. Grease gun lubrication through the chain pin is available on request and heat treated stainless steel pins.87 38.9063 623000 152.58 19.83 10. Roller dia.87 38.13 41. Hole transverse centres mm. Plate thickness mm.9060 312000 152. Breaking loads range from 31.05 9. in that juice and chopped cane.4 38.3 R.85 31.13 44.31 13.4 38.13 41. bushes and rollers can be supplied.28 24.85 28.58 19. Attachment hole dia.2 111. The cane is fed onto the conveyor which is usually sized to match the mill roller width and operates as a corrugated overlapping slat conveyor. Bush dia.4 38. heat treatment and design have been developed to ensure optimum chain life and maximum value for modest cost. Platform height mm. mass (weight) kg/m.45 27.1796 445000 152.1 76. The chopping of the cane on these conveyors can cause problems. Two or three strands of chain are normal in such conveyors with the corrugated slats bolted on to the K attachments with angle cleats at intervals to prevent cane slippage. mm.4 38.1 76.13 41. Metric Average breaking load Newtons Pitch mm. As the originators of the bush roller chain in 1879 and being the first company to incorporate these features for cane carrier applications during the 1920's.000-140.800 kgf to 63.1 76.87 38.1 69.75 22.000 lbf).1 69.Renold Conveyor Chain Catalogue I 67 Sugar Cane Industry Cane Carrier Chains Product Description Cane Carrier Chain is used in the second operation within a sugar mill. mm. Renold Chain No. we are uniquely placed to offer the finest products for carrying cane from the yard to the first mill.7 R. Materials.9061 379000 152.75 23.1 69.2 111.500 kgf (70.87 38.53 13. together with contamination from sand etc.53 13.23 9.28 25. mm. It is estimated that this range covers up to 80% of main and auxiliary carriers worldwide.1 76.20 31. Width between inner plates mm.28 26. Connecting pin dia.5 . Section 3 Technical Data The advantage Renold has over all other competitors is experience.1 76. fulcrum bolt and flight complete .1.12 88.9063# 623000 152.70 18. Flight hole centre to chain centre mm. All the chain components are replaceable. Although two standard roller sizes are available.60 63.30 50.55 114. The lug and flight attachments are spaced according to individual requirements.25 57. They are available with straight plates.80 12. mm.12 89.55 114.2 Weight of lug. STYLE B.80 111.30 50.9060 312000 152. or cranked plates.90 82.80 12. This residue is used as a fuel for the sugar mill boilers to make steam to drive turbines producing the mill's electricity.68 I Renold Conveyor Chain Catalogue Sugar Cane Industry Technical Data STYLE A STYLE B Section 3 Average breaking loads and dimensions A to F inclusive are common with Cane Carrier Chains:.08 57. Renold Chain No. Using the same round components as the cane carrier range.4 95.15 111.55 114. R. EXCEPT R.90 82. (3.15 111.) # STYLE A ONLY .9063 which is produced in STYLE A only. a separate return conveyor will have been installed. A M N O P R S T U Approx. other diameters are available on request.70 20. these chains provide the capacity to meet the majority of bagasse conveying requirements. Plate depth mm. Flight depth (nominal) mm. Flight width (nominal) mm.4 100.30 50.7 R. Additionally. The Bagasse conveyors are usually of a scraper construction carrying away the bagasse directly to the boiler input chutes or into a separate bagasse store. Bagasse Carrier Chain Product Description Bagasse (the residue of milled cane) has a small amount of sugar left in it.55 114. Metric Average Breaking Load Newtons Pitch mm.70 16.50 111. Flight face from pitch point mm.80 12.70 16. contains approximately 50% moisture and is a substance that will easily burn.7 R. Flight hole vertical centres mm.0lb.80 12. If not.36kg.See page 125. stainless pins.90 82.9061 379000 152. mass (weight) plain chain kg/m. Bolt dia.4 95. Connecting pin length mm.12 88.66 82.12 88. STYLE A.30 50.25 50. In some cases the conveyor will also double up as a bagasse return conveyor.1796 445000 152. bushes and rollers can be supplied.2 R.4 101. For extremely arduous duty the tooth flanks should be flame hardened. 2 Fig. segments of teeth can be replaced one at a time without having to disconnect or remove the chain. Considerable expense can be saved in sprocket replacement time. These are made in two half sections and the mating faces machined to allow accurate assembly with the shaft in place. 2. In this case it is necessary to remove the complete shaft to be able to remove the sprockets. Fig. . should be of such proportions and strength that sprocket alignment remains unimpaired under load. thus considerable expense and downtime can be saved. Sprockets can be manufactured from good quality cast iron or fabricated steel. 1 d = Pitch circle diameter da = Top diameter db = Boss diameter de = Bore diameter dg = Shroud diameter bf1 = Shroud width bf2 = Face to sprocket centreline bf3 = Distance through boss Note: Please consult Renold for details on standard sprockets or designs to meet individual requirements. Table 1 gives a guide to the material required. Shafts. This type of sprocket is particularly useful on multi-strand conveyors where long throughshafts are used. Shaft sizes should be selected taking into account combined bending and torsional moments. then sprockets may be of the split type. whether they are through shafts or of the stub type.4% Fabricated Fabricated Carbon Steel with Steel Steel Steel hardenedteeth The vast majority of sprockets in use are of the one piece cast iron or fabricated steel design and are usually parallel or taper keyed to a through shaft. For arduous duty. it may be necessary to use steel sprockets having a 0.4% Carbon Cast Iron or Cast Iron or 0. There are other materials which may be specified for particular requirements. but also to guide and support it in its intended path.4% carbon content. With this type of sprocket. Table 1 Normal Conditions Moderate Shock Loading Heavy Shock Loading Abrasion. Section 3 General Description Sprocket dimensions Salient sprocket dimensions are shown in fig. Stainless steel for example is used in high temperature or corrosive conditions. Sprockets with removable tooth segments are particularly useful where sprocket tooth wear is much more rapid than chain wear. No Shock Loading Abrasion and Heavy Shock Loading Cast Iron 0.Renold Conveyor Chain Catalogue I 69 Sugar Industry Conveyor Sprocket Details Sugar Industry Sprockets The normal function of a chain sprocket is not only to drive or be driven by the chain. If quick detachability is necessary without dismantling shafts or bearings. Chain Product No: 171649. Replaces WH124 4. Solid pin.04” pitch 85. Description: 4. Bush chain.000 lbf (380 KN).063” pitch Welded Bush Chain.70 I Renold Conveyor Chain Catalogue Theme Park Section 3 Renold Roller Coaster Chain Chain Product No: 171123. Description: 4. Description: 4. Chain Product No: 197740. Description: 4. Roller chain. Bush chain. Replaces WH126 4. Chain Product No: 171360.063” pitch Welded Bush Chain.063” pitch 100. .000 lbf (446 KN) Solid pin.063” pitch 100.000 lbf (446 KN) Solid pin.76” pitch 100.000 lbf (446 KN) Solid pin. Service plus special lubricant. Please consult Renold for other special engineered designs. Bush chain. Description: 6" pitch 125000 lbf (550 KN) Solid Pin. Description: 4" pitch 15000 lbf (67000 N) Solid Bearing Pin Chain with K3 attachments one side every outer. Description: 6" pitch 90000 lbf (400000 N) with K2 attachments one side every outer. Chain Product No: 178388. Bush chain. Bush chain. Chain Product No: 171749. Zinc plated throughout plus a special lubricant. Chain Product No: 179840. Zinc plated throughout plus a special lubricant. Zinc plated plus special lubricant. Chain Product No: 179362. Description: 6" pitch 45000 lbf (200000 N) Solid Bearing Pin Chain with K2 attachments one side every outer. Bush chain. Renold has developed corrosion resistance treatments for water ride applications giving increased service life and reducing maintenance costs. . No attachments. To protect chain like the one seen above. Zinc plated throughout plus a special lubricant. Bush chain. Description: 4" pitch 30000 lbf (134000 N) Solid Bearing Pin Chain with K2 attachments one side every outer.Renold Conveyor Chain Catalogue I 71 Theme Park Section 3 Renold Water Ride Chain Chain Product No: 176499. Hydro . or abrasive such as sludge collector tanks. Several specifications of chain are available including special alloy chain. stainless steel chain and special engineered chain. such as primary settlement tanks.72 I Renold Conveyor Chain Catalogue Section 3 Water Treatment Chain Renold manufacture a wide range of Water Treatment Chain for use in sewage and industrial waste water treatment plants. Renold has been developed to withstand the hostile environments associated with the water industry. Typical applications are in environments which are corrosive. . 200 85. resulting in excellent gearing.675 157.250 76. Non-Metallic Chain F B J D Q R K L M P O N H A Renold Chain No.232 95. reduced wear and a reduction in noise levels during operation.163 139.725 14.288 66.288 114.350 . Mass kg/m A B C D E H S T JCCNCS 720S F22-6 2. Attachment No.2000 85. Maximum chain strength and resistance to wear are achieved by strict control of the material specification and by using state of the art heat treatment processes. Product No: 797000.Renold Conveyor Chain Catalogue I 73 Water Treatment Chain Scraper Chain for Primary Settlement Tank Renold chain fitted to primary settlement tanks is designed to operate fully immersed with the minimum of attention and lubrication.725 14.350 JCCNCS 720S F22-8 2.700 6. • Chain: 179 701/90 • Pitch: 381mm • Breaking load: 160kN Chain and sprocket life are optimised by the rigid control of pitch accuracy. Galvanised Plates with Stainless Steel round parts and Cast Iron rollers Section 3 • Fresh Water Screening Chain These chains run as pairs and drive mesh screens acting as filters to remove river and sewage debris.084 95.025 139.300 200. lower friction.700 6.250 76. As well as the lumber industry. but like all chains. If you require further information.00 (0. stackers and transfer conveyors. These chains are used as an integral part of lumber conveyors for such applications as board ovens.74) 28. • Rollers designed to cope with this hostile application.22 6. trimmer saws.266) 4. petroleum based oil.22) 8.56 5.94) 60. unscramblers. plaster and fibre board manufacture. sorters.57) 53.30 (1.00 (0.00 (0. Renold standard specification includes: Chains should be protected against dirt/moisture and be lubricated with good quality.85 (2.74 I Renold Conveyor Chain Catalogue Lumber industry 81X-81XH Lumber Chain Product Description Lubrication Part Number: Renold 81X series chains have identical gearing dimensions and will run on the same sprocket within a given application. Specialist advice should be sought for each application to ensure that the lubricant used does not degrade or contaminate the timber product carried. Both chains are designed with maximum chain life as the prime objective.266) 32. need regular relubrication during their working life. Technical Data DIMENSIONS mm (INCHES) J K CP G K J Chain Number Renold Chain Number Pin Length (max) Con Pin Length (max) G CP H K J 81X 81XH 81XHH 171306 171312 171770 49.60 (0. • All chains are pre-lubricated to enhance initial chain life and or protection whilst in storage.37) 65. • A material with excellent weldable properties. The 81XH and 81XHH chains are used on heavy duty conveyor applications where space is limited.18 (2.25 (2.60 (1.157) 5.00 (0. the standard method of fixing attachments within the industry. • Very accurate pitch control that lowers friction resulting in reduced wear. Renold chains are pre-lubricated before despatch.15 (1.315) Height Link Plates Thickness (Inner) Thickness (Outer) Minimum Breaking Load kN Minimum Breaking Load (lbf) Number of Links (3.55) 69. The chain has excellent conveying properties suitable for other hostile applications such as quarrying or the manufacture of concrete products. • Heat-treated side plates for increased wear and fatigue life.00 (0.65 (2.11) 64.15 (1.315) 4. veneer dryers. 171306 (81X) 171312 (81XH) 171770 (81XHH) Application: Section 3 These roller chains are specially designed for the rugged and hostile environment found in the lumber industry.65 (2.157) 8.86 . these chains can now be found in such applications as grainhandling. non-detergent.05 m) Average Chain Weight kg/m 107 196 205 (24000) (44000) (46000) 46 46 46 3.315) 8.125) 32. please consult your local Renold representative or consult the Installation and Maintenance section. Bucket conveyor or elevator Box scraper conveyor • Chains selected to suit each application.8mm • Breaking load: 285kN. • Chains selected to suit each application. carries car bodies through assembly and paint spray lines. These have buckets fixed to one or two strands of chain. With a single chain. Overhead chain fitted with outboard rollers typically used in the packaging industry. Bi-planar chain Cranked link bakery chain • Chain: 171 044 • Pitch: 280mm • Breaking load: 96kN. The chains scrape the floor of the box and return on guide rails at the top of the box. Matched in pairs. Carrying bulk non-abrasive materials. all round parts coated in manganese phosphate for conveying bread through provers. Such elevators are suitable for handling lumpy. these conveyors feature a closed box. Zinc plated bi-planar chain used to carry carcasses through a slaughter house. • Chain: 171260/90 • Pitch: 177. The buckets are so shaped that when passing over the headwheel. Section 3 Abattoir chain . horizontally or up a small incline.Renold Conveyor Chain Catalogue I 75 Special Engineered Chain Car conveyor chain • Chain: 176 493 • Pitch: 254mm • Breaking load: 67kN. With two strands of chain. friable or abrasive materials. Feeding of the elevator is achieved by a loading leg or chute. • Chain: 795 034 • Pitch: 152. the back of each bucket acts as a chute for the material discharged from the following bucket. Deep link chain fitted with Nylatron wear pads. scraper flights of integral malleable steel or in the form of L attachments protrude on each side to span the box. the scraper flight is carried between strands.4mm • Breaking load: 160kN. ovens and coolers. are often staybars or angles bolted across a pair of chains. These chains cradle newly spun concrete pipes through curing ovens. releasing them onto the ride. Used to convey rigid packages or unit loads having an even base by pushing them over a fixed bedplate. as shown. . New design of cranked link chain for roller coaster rides. Alternatively.cranked link chain • Chains selected to suit each application. Commonly known as gull wing chain. The pushers. Generally used to convey paper or linoleum between manufacturing processes when the material must hang for drying without touching. • Chains selected to suit each application. These conveyors operate horizontally or on inclines up to 40°. positioned above the bedplate and spaced at appropriate intervals. loose crossbars may be used. Its heavy duty characteristics allow it to cope with the arduous operating conditions encountered in aluminium processing.2mm pitch • Breaking load 667kN. Steel slabs are carried across the chains. The bars which support the material may be fixed staybars or rollers which are free to rotate. • 199232/90 • 190 mm pitch • Breaking load 712kN. • 588 506 • 103. Pusher conveyor Pipe curing conveyor chain Pulls carriages up incline. Seven chains running parallel. • 600mm pitch • Breaking load 3924kN.76 I Renold Conveyor Chain Catalogue Special Engineered Chain Section 3 Festoon conveyor Roller coaster ride . Cranked link conveyor chain Slab conveyor chain • Chains selected to suit each application. the centre of gravity of the tray and load must be below the spigot pin to eliminate risk of tipping. Slats may incorporate upturned ends or may run between skirt boards to prevent spillage. A pair of chains fitted with spigot pins allows the trays to pivot freely. by F or L attachments. Trough scrapers Steriliser chain • Chains selected to suit each application. Trough scraper conveyors are designed to move bulk materials along a trough by means of scraper plates fixed at intervals between a pair of conveyor chains.8 mm pitch • Breaking load 400kN. • 179701/90 • 304. Swing tray elevators are suitable for elevating any type of package.Renold Conveyor Chain Catalogue I 77 Swing tray elevator Steel apron / overlapping slats • Chains selected to suit each application. Chains are matched to run in pairs within canned food steriliser systems. Bulk materials are fed into the elevator boot and pick-up is by the buckets scooping or dredging. The material is normally fed into the trough by a gravity feed and discharged through an opening in the floor of the trough. Pusher attachments drives steel sections in steel mills.9mm pitch • Breaking load 178kN. Spaced bucket elevator Transfer chain • Chains selected to suit each application. A continuous slat conveyor with a series of flat or formed steel slats carried between a pair of conveyor chains on K attachments. loading and unloading can be automatic. • Chains selected to suit each application. By fitting finger-type trays. Discharge of material relies on the speed of the bucket around the headwheel to impart a centrifugal force to the material so that it is thrown clear of the preceding bucket. • 171 320/90 • 88. Buckets are fixed at intervals to one or more chains. This type of conveyor may be used on inclines. box or sack. Section 3 Special Engineered Chain . 78 I Renold Conveyor Chain Catalogue Section 3 Notes . Civil & Military • Bakery Machines • Battery Manufacturing • Brewing • Canning • Carpet Machines • Chart Tables/Marine • Chocolate Manufacturing • Concrete Moulding Equipment • Copying Machines • Dairy Machinery • Drying Machinery • Earth Moving Equipment • Extrusion Machines • Filtration Plants • Food & Drink Manufacture • Glass Manufacture • Health Care Equipment • Hydraulic Components • Ice-Cream Manufacture • In-flight Refueling • Ingot Casting & Scrap Metal Processing • Latex Machinery • Laundry Machinery • Lawnmower Manufacture • Mill Machinery • Mining • MOT Brake Testing Machinery • Nuclear Power • Off Road Vehicles • Oil Industry • Packaging Machines • Paper & Card Making • Paper Shredders • Plastic Machinery • Potato Grading Machinery • Power Generation • Printing Machines • Quarry Plant • Road Making & Plant Machinery • Robotic Systems • Roof Tile Manufacture • Ship's Engines • Silkscreen Machinery • Ski-Lifts • Soot Blowers • Steel Making • Straddle Carriers • Sugar Beet Machines • Sun-Blinds • Telecommunications • Textile Machinery • Timber and Woodworking Machines • Tin Printer Ovens • Tobacco/Cigarette Machinery • Tunnelling Machines • T. Specifications . . Illustrations . A cranked link joint should only be used as a last resort. express or implied.V. Copyright . API. The use of other connectors and cranked links (No 12 and No 30) must always be restricted to light duty. Wherever possible. and Audio Equipment • Tyre Manufacture • Waste Handling • X-Ray Equipment Conveyor Chain • British. AL. DIN. No representations or warranties are given that our product shall meet the stated performance levels or tolerances for any given application outside the performance levels and tolerances for the product’s own specific application and environment. customers are reminded that when purchasing any technical product for use at work (or otherwise). in preference to any other form of chain joint. All relevant information and guidance must be passed on by you to the person engaged in. or likely to be affected by or responsible for the use of the product.2 I Renold Conveyor Chain Catalogue Renold Conveyor Chain Catalogue I 79 Renold Chain Product Range Roller Chain • British.Copyright Renold Power Transmission Limited 2010.The illustrations used in this catalogue represent the type of product described but the goods supplied may vary in some detail from those illustrated. serviceability. Whilst all reasonable care in compiling the information contained in this catalogue is taken. ANSI. should be obtained by you from your local sales office in relation to the suitability and the safe and proper use of the product.Product can be supplied by Renold companies or representatives around the world on the standard terms and conditions of sale of the company or representative from which the product is purchased. Nothing contained in this publication shall constitute a part of any contract. resistance to fatigue. LL and Works Standard Chains Applications • Bottle Washing Plants • Cement Plants • Chemical • Counterbalance Sets • Cranes • Dust/Swarf Conveyors • Elevators • Food Processing • Food Sterilisation • Fork Lift Trucks • Pipe Line Valves/Taps • Printing Machines • Rock Drilling • Straddle Carriers • Sun-Blinds • Tail Lifts Safety warning Health and Safety at work Guidance notes Outer Link: for high speed drives or drives operating in arduous conditions a properly riveted outer link (No 107) must always be used for optimum security. no responsibility is accepted for errors. Chain performance The performance levels and tolerances of our product stated in this catalogue (including without limitation. in drives where an odd number of pitches is absolutely unavoidable. All rights reserved. ISO and Works Standard Chains • Adapted Chains • Extended Pitch Chains • Hollow Pin Chains • Made to Order. Specials Stainless Steel Chains Sugar Cane Chains Zinc Plated Chains Applications • Abattoirs • Agricultural Machines • Bakery Machines • Bottle Washing Plants • Brick & Tile Machinery OEM • Car Plants • Cement Plants • Chemical Plants • Chicken Process Equipment • Cigarette/Tobacco Machinery • Dust Filters • Egg Sorting Conveyors • Electrical Switchgears • Escalators • Extrusion Machines • Feed Mill Machines • Feed Silo Equipment • Fibreglass Industry • Filtration Plants • Fish Conveyor • Food Sterilisation • Food Processing • Freezing Equipment • Freezing Tunnels • Glass Manufacturing • Grain Conveyor • Harvesting Machines • Ice Cream Machines • Induction Furnaces • Ingot Casting & Scrap Metal Processing Mfr • Latex Machinery • Leisure Rides • Luggage & Parcel Handling • Machine Tools • Mail Sorting • Metal Casting • Mushroom Compost Machinery • Nuclear • Ovens/Provers • Potato Grading Machinery • Potting Machinery • Quarries • Radio Astronomy • Roof Tile Manufacture • Rope Machinery • Saw Mill Equipment • Sewage Plants • Shaker Conveyors • Ski-Lifts • Sluice Gates • Steel Making • Sugar Factories • Swarf Conveyors • Textile Machinery • Timber & Woodworking Machines • Tool Changer • Tunnelling Machines • Tyre Manufacture • Washing & Sterilising Machines • Water Treatment • Wire Belts Lifting Chain • LH(BL). Special Chains • Mini Pitch Chains • • • • • • • Nickel Plated Chains Oilfield Chains Plastic Bush Chains Power and Free Chains Polymer Block Chains Side Bow Chains Stainless Steel Chains Applications • Abattoirs • Air Conditioning • Aircraft . drives should have sufficient overall adjustment to ensure the use of an even number of pitches throughout the useful life of the chain. wear life. independent and/or international standard recommendations. Renold . All information contained in this catalogue is subject to change without notice.The right is reserved to make modifications to the product to meet manufacturing conditions and/or developments (for example in design or materials). which it has not been possible to include in the publication. In the interests of safety. any additional or up-to-date information and guidance. ISO and Works Standard Chains • Adapted Chains • Agricultural Chains • Bakery Chains • Deep Link Chains • • • • • Escalator Chains Made to Order. corrosion protection) have been verified in a programme of testing and quality control in accordance with Renold. noncritical applications. [email protected] Tel: + 45 43 45 26 11 Fax: + 45 43 45 65 92 e-mail: [email protected]. Wollongong. Adelaide. Tel: + 33 (0) 320 16 29 29 Fax: + 33 (0) 320 16 29 00 e-mail: [email protected] Tel: + 34 93 638 9641 Fax: + 34 93 638 0737 e-mail: [email protected] Philippines Paranaque City UK Burton upon Trent Tel: + 63 2 829 6086 Fax: + 63 2 826 5211 Tel: + 44 (0) 1283 512940 Fax: + 44 (0) 1283 512628 e-mail: ukchain@renold. no responsibility is accepted for printing errors.uk France Seclin Russia Moscow Whilst all reasonable care is taken in compiling the information contained in this brochure. [email protected] . © Renold Power Transmission 2010. Townsville Austria Vienna Tel: + 43 (0) 1 330 3484 Fax: + 43 (0) 1 330 3484-5 e-mail: [email protected] also at: Budapest (Hungary). Newcastle.India Coimbatore Tel: + 61 (0) 3 9262 3333 Fax: + 61 (0) 3 9561 8561 e-mail: [email protected] Conveyor chain Poland Tel: + 48 663 842 487 e-mail: info@renold. Tel: + 36 30 228 3269 Fax: + 36 1 287 8087 e-mail: peter. Brisbane.com New Zealand Auckland Switzerland Dübendorf (Zürich) Tel: + 64 9828 5018 Fax: + 64 9828 5019 e-mail: [email protected] www.be China Shanghai Tel: + 21 5046 2696 Fax: + 21 5046 2695 e-mail: [email protected] Belgium Gent Tel: + 32 (0) 9 242 95 50 Fax: + 32 (0) 9 242 95 59 e-mail: [email protected] 4226800 Fax: +91 .za also at: Johor Bharu.com www.com Singapore Tel: + 65 6760 2422 Fax: + 65 6760 1507 e-mail: [email protected] also at: Sydney.t-online. Germany Einbeck Scandinavia Hvidovre (Copenhagen) Tel: + 49 (0) 5562 810 Fax: + 49 (0) 5562 81130 e-mail: [email protected] Malaysia Selangor Darul Ehsan Tel: + 60 3-5122 7880 Fax: + 60 3-5122 7881 e-mail: [email protected] All information contained in this brochure is subject to change after the date of [email protected]. Cape Town Netherlands Amsterdam Spain Gavá (Barcelona) Tel: + 31 (0) 20 6146661 Fax: + 31 (0) 20 6146391 e-mail: [email protected] For other country distributors please consult www. Ref: REN2 / ENG / 10.renold.nz Tel: + 41 (0) 44 824 8484 Fax: + 41 (0) 44 824 8411 e-mail: [email protected] USA Morristown TN Tel: + 1 800 251 9012 Fax: + 1 423 581 2399 e-mail: [email protected] Tel: + 4 0726 69 56 52 Fax: + 4 0232 76 56 52 e-mail: renold. Perth.com Tel: + 7 495 645 2250 Fax: + 7 495 645 2251 e-mail: info@renold. Port Elizabeth.422 2532358 e-mail: [email protected] Canada Montreal (Quebec) also at: Christchurch also at: Crissier (Lausanne) Tel: + 1 514 367 1764 Fax: + 1 514 367 4993 e-mail: [email protected] Tel: +91 . Penang also at: Richards Bay.sg Conveyor Chain Australia Melbourne (Victoria) South Africa Benoni (Johannesburg) Tel: + 27 11 747 9500 Fax: + 27 11 747 9505 e-mail: [email protected] Czech Republic Zlin Romania Motca Tel: + 420 606 727 811 Fax: + 420 577 240 324 e-mail: jaroslav.