RadcureCoatingResins_ProductGuide

RADCURE COATING RESINSPRODUCT GUIDE • Energy Curable Resins • Americas www.allnex.com All About Resins FACTS & FIGURES About us d imately Table of Contents Product Families .............................................................................................................................. 4 Product Index .................................................................................................................................. 5 New Products ................................................................................................................................... 6 UCECOAT® Waterborne UV Resins ................................................................................................ 7 EBECRYL® LEO Resins ...................................................................................................................... 9 EBECRYL Urethane Acrylates ....................................................................................................... 10 EBECRYL Polyether/Polyester Acrylates & Diluted Polyesters ............................................... 16 EBECRYL Polymer/Diluent Blends ............................................................................................... 19 EBECRYL Epoxy Acrylates ............................................................................................................. 20 Diluting Acrylates .......................................................................................................................... 24 ADDITOL® & EBECRYL Additives .................................................................................................. 28 ADDITOL & EBECRYL Photoinitiators .......................................................................................... 29 Product Selection Guide .............................................................................................................. 30 Photoinitiator Selection Guide .................................................................................................... 34 Key to the Tables ............................................................................................................................ 35 Contact Us ................................................................................................................................. Back 3 di. Photoinitiators absorb UV light and start the polymerization. Aliphatic types are non-yellowing and can provide outstanding exterior durability Polyester acrylates are used in a wide range of applications including flexographic and lithographic inks and coatings for paper and wood. Some specialty polyester oligomers provide good adhesion to various substrates. Urethane acrylates impart toughness and flexibility. All are co-polymerizable. Polymeric resins in monomer can provide adhesion to difficult substrates with low shrinkage and better film formation.Product Families UCECOAT® Waterborne UV Resins These waterborne resins have low viscosities without the use of diluting acrylates and good physical properties after crosslinking. flow or slip characteristics of coatings. Product types are hydrogen abstraction. tri and higher functional acrylate diluents reduce the viscosity of oligomers and can contribute important physical properties to cured formulations. amine synergists and mixtures. LEO (Low Extractables and Odor) resins are specifically formulated to provide a significant reduction in odor release and potential migration for producing inks and coatings for food and pharmaceutical packaging. EBECRYL® LEO Resins EBECRYL Urethane Acrylates EBECRYL Polyether/Polyester Acrylates & Diluted Polyesters EBECRYL Polymer/Diluent Blends EBECRYL Epoxy Acrylates Diluting Acrylates EBECRYL Additives ADDITOL® & EBECRYL Photoinitiators 4 . Epoxy acrylates are used in formulations requiring superior chemical resistance. Several additives are designed to assist with adhesion or enhance the wetting. hardness and fast cure. Several are tack-free after water evaporation. Mono. 14 14 14 14 14 14 14 6. 11 19 28 19 20 20 20 21 21 21 21 21 21 21 22 22 22 22 22 22 22 23 23 23 15 11 15 11 11 12 29 4. 10 11 19 28 16 16 16 16 17 17 17 20 20 20 17 19 17 17 17 17 18 20 EBECRYL 870 EBECRYL 871 EBECRYL 885 EBECRYL 888 EBECRYL 889 EBECRYL 893 EBECRYL 1258 EBECRYL 1290 EBECRYL 1291 EBECRYL 1300 EBECRYL 1360 EBECRYL 1710 EBECRYL 3200 EBECRYL 3201 EBECRYL 3411 EBECRYL 3415 EBECRYL 3418 EBECRYL 3500 EBECRYL 3600 EBECRYL 3700 EBECRYL 3701 EBECRYL 3701-20T EBECRYL 3702 EBECRYL 3703 EBECRYL 3708 EBECRYL 3720 EBECRYL 3720-HD20 EBECRYL 3720-TM20 EBECRYL 3720-TM40 EBECRYL 3720-TP25 EBECRYL 3720-TP40 EBECRYL 3730-TP20 EBECRYL 4827 EBECRYL 4833 EBECRYL 4849 EBECRYL 4858 EBECRYL 4883 EBECRYL 5129 EBECRYL 7100 EBECRYL 8100 EBECRYL 8110 EBECRYL 8210 EBECRYL 8296 EBECRYL 8301-R EBECRYL 8311 EBECRYL 8402 EBECRYL 8405 18 18 18 18 18 18 11 11 6. 14 9 9 9 9 9 9 9 29 29 29 8 8 7 7 7 7 7 7 8 8 8 24 25 26 25 24 25 26 26 26 27 25 ADDITOL® additives and photoinitiators EBECRYL® energy curable resins UCECOAT ® waterborne UV resins 5 . 10 10 10 10 6.Product Index ADDITOL® DX ADDITOL LX EBECRYL® 40 EBECRYL 53 EBECRYL 80 EBECRYL 81 EBECRYL 83 EBECRYL 110 EBECRYL 113 EBECRYL 114 EBECRYL 130 EBECRYL 140 EBECRYL 150 EBECRYL 152 EBECRYL 154 EBECRYL 168 EBECRYL 170 EBECRYL 180 EBECRYL 220 EBECRYL 230 EBECRYL 242 EBECRYL 246 EBECRYL 264 EBECRYL 265 EBECRYL 270 EBECRYL 271 EBECRYL 284 EBECRYL 303 EBECRYL 350 EBECRYL 411 EBECRYL 436 EBECRYL 438 EBECRYL 450 EBECRYL 452 EBECRYL 524 EBECRYL 571 EBECRYL 600 EBECRYL 605 EBECRYL 608 EBECRYL 657 EBECRYL 745 EBECRYL 809 EBECRYL 810 EBECRYL 811 EBECRYL 812 EBECRYL 830 EBECRYL 860 29 29 27 27 16 16 16 24 24 24 25 27 25 25 16 28 28 27 15 10 10 6. 10 12 12 12 12 12 13 13 EBECRYL 8411 EBECRYL 8412 EBECRYL 8413 EBECRYL 8414 EBECRYL 8465 EBECRYL 8501 EBECRYL 8602 EBECRYL 8701 EBECRYL 8702 EBECRYL 8800-20R EBECRYL 8804 EBECRYL 8807 EBECRYL 8808 EBECRYL 8810 EBECRYL LEO 10501 EBECRYL LEO 10502 EBECRYL LEO 10551 EBECRYL LEO 10552 EBECRYL LEO 10553 EBECRYL LEO 10601 EBECRYL LEO 10801 EBECRYL P104 EBECRYL P115 EBECRYL P39 UCECOAT® 6558 UCECOAT 6569 UCECOAT 7200 UCECOAT 7571 UCECOAT 7655 UCECOAT 7674 UCECOAT 7689 UCECOAT 7699 UCECOAT 7710 UCECOAT 7890 UCECOAT 7891 ß-CEA DPGDA DPHA HDDA IBOA NPG(PO) 2DA ODA-N PETIA TMPEOTA TMPTA TPGDA 13 13 13 13 13 13 6. and resistance to yellowing. toughness and flexibility. heavy metals (1). EBECRYL 1291 EBECRYL 3418 EBECRYL 8100 Aliphatic Urethane Tetraacrylate Developed to provide energy cured coatings with an easy to clean surface. heavy metals (1). exterior durability. or the European Standard on Safety of Toys EN 71 Part 3 : 1994 + A1:2000 + A1/AC:2000 + AC:2002. Diluted 20% by weight with hydroxypropyl methacrylate Aliphatic Urethane Hexaacrylate No intentionally added tin. Key Features & Performance • Regulation friendly for tin.N. Exhibits excellent abrasion resistance. Aliphatic Urethane Diacrylate No intentionally added tin. and quinones • Excellent scratch and abrasion resistance • High gloss • High surface hardness • Non-yellowing • • • • • • • • • • • • • Excellent UV/EB cure response High flexibility Good chemical resistance High gloss Toughness Excellent adhesion to most types of wood and many plastics Outstanding cleanability with long lasting effect High gloss Excellent surface hardness Excellent chemical resistance Resistant to permanent markers (Sharpie ® test) Good adhesion Non-yellowing EBECRYL 271 EBECRYL 1258 Aliphatic Urethane Triacrylate No intentionally added tin. heavy metals. and adhesion with resistance to yellowing. and quinones • Good flexibility • Good adhesion • Non-yellowing • Exterior durability • Abrasion resistance • Regulation friendly for tin. and resistance to yellowing. EBECRYL 8602 Nine Functional Aliphatic Urethane Acrylate Exhibits significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylates without compromising scratch and abrasion resistance. or quinones. and quinones • Excellent abrasion resistance and stain resistance • Good flexibility and toughness • Good adhesion • Non-yellowing • Regulation friendly for tin. or quinones. easy removal of fingerprints. abrasion resistance. heavy metals (1). chemical resistance. Outstanding hardness. • Regulation friendly for tin. adhesion. 6 .New Products NEW PRODUCTS Product EBECRYL® 246 Description Aliphatic Urethane Diacrylate No intentionally added tin. or quinones. and resistance to yellowing. Combines abrasion resistance. heavy metals. heavy metals. Exhibits good flexibility. heavy metals. toughness. adhesion and superior chemical and scratch resistance. Modified Epoxy Acrylate Demonstrates high flexibility. heavy metals (1). and quinones • Good abrasion resistance • Excellent flexibility • Exceptional toughness • Non-yellowing cure response EBECRYL 8810 (1) As defined by C. the ASTM Standard Consumer Safety Specification on Toy Safety F 963 (ASTM F 963-08). and quinones • Excellent surface hardness and chemical resistance • Excellent weatherability compared to traditional hardcoats • High gloss • Low haze after abrasion resistance • Regulation friendly for tin. gloss. scratch and abrasion resistance.O. Does not contain intentionally added organic tin compounds. heavy metals (1). or quinones.E. Exhibits high contact angles and gloss. dust and particulates from the surface of the coating. Aliphatic Urethane Diacrylate No intentionally added tin. oils. and are resistance to yellowing. Excellent abrasion resistance. toughness and flexibility. and quinones • Good abrasion resistance • Excellent flexibility • Exceptional toughness • Non-yellowing • Regulation friendly for tin. heavy metals (1) or quinones. heavy metals.G’s Toxic in Packaging Legislation. or quinones. heavy metals. flexibility. % pH 7 .7 97 <0 UCECOAT 7689 Translucent to white liquid 117 35 7.02 1. cP at 25°C Product • Key Features & Performance UCECOAT 7200 Waterborne Aliphatic Urethane Acrylate • High solids (65%) • Exceptional hardness. scratch and stain resistance • High gloss • High reactivity • High chemical resistance • Robust adhesion on plastic substrates (ABS. °C ― Description UCECOAT 7571 Translucent to white liquid 69 35 7.7 500 MFFT.10 1.4 42 0 UCECOAT 7699 Translucent liquid 32 35 7. easy to formulate White emulsion 464 65 3.UCECOAT® Waterborne UV Resins Waterborne UV Dispersions Typical Properties (1) Particle size.6 64 <0 UCECOAT 7674 Translucent to white liquid 38 39 6.0 Appearance Solids Content. PC) • Solvent-free Acrylated Polyurethane Dispersion • Low viscosity • Physically drying before UV cure • Excellent adhesion • Good stain & chemical resistance • Balanced hardness and flexibility • Optimized colloidal stability Acrylated Polyurethane Dispersion • Low viscosity • Physically drying before UV cure • Superior hardness and scratch resistance • Excellent stain & chemical resistance • Excellent reactivity in clear and pigmented coatings • Optimized colloidal stability Acrylated Polyurethane Dispersion • Low viscosity • Outstanding wetting of wood • Excellent adhesion & appearance • Excellent stain & chemical resistance • Optimized colloidal stability Acrylated Polyurethane Dispersion • Low viscosity • Physically drying before UV cure • Excellent exterior durability • High flexibility • Good chemical resistance Acrylated Polyurethane Dispersion • Low viscosity • Physically drying before UV cure • Very high reactivity in clear and pigmented systems • Excellent stability • Good compatibility.3 83 6 (1) Not a specification Density.0 1.5 58 <0 UCECOAT 7655 Translucent to white liquid 47 35 7. g/ml at 25°C 1. nm Viscosity.05 1.00 1. Granuler Description ― UCECOAT 6569 Clear liquid 8566 (60°C) 95 1 (1) Not a specification 8 Density. g/ml at 25°C 1. °C ― Description UCECOAT 7890 Translucent to white liquid 11 34 7.UCECOAT® Waterborne UV Resins Waterborne UV Dispersions Typical Properties (1) Particle size.05 Viscosity.8 111 MFFT. % Density. nm Product • Key Features & Performance UCECOAT 7710 Waterborne Aliphatic Urethane Acrylate • High gloss • Excellent mirror effect without polishing • Good stain and solvent resistance • High hardness & scratch resistance Acrylated Polyurethane Dispersion • Specifically developed for UV curable field applied wood and VCT floor coatings • Good foam control • Excellent wetting of matting agents.10 Viscosity. pigments. cP at 25°C Appearance Solids Content. % pH .1 <150 <0 UCECOAT 7891 Translucent to white liquid 20 31 7.10 1.09 1.05 1. g/ml at 25°C 1.3 <150 <0 Waterborne UV Solutions Typical Properties (1) Product • Key Features & Performance UCECOAT 6558 Aliphatic Urethane Acrylate Solution • Moderate viscosity • Good adhesion • Excellent flexibility • Resistance to yellowing • Good aspect or appearance Aliphatic Urethane Acrylate Solution • High viscosity • Light color • Good adhesion and transparency • Excellent flexibility • Resistance to yellowing Clear to clouded liquid 2990 (25°C) 50 Color. and substrates • Floor coatings with uniform matting • Physically drying before UV cure Acrylated Polyurethane Dispersion • Excellent appearance in matte coatings • Superior stability of matte formulations • Excellent solvent and chemical resistance • Physically drying before UV cure • Matte appearance without matting agents Translucent bluish to white liquid 81 44 6. cP at 25°C Appearance Solids Content. 5 EBECRYL LEO 10553 3.08 Viscosity.12 1. Gardner (Pt-Co) Molecular weight.12 1.4 EBECRYL LEO 10551 2. g/mol 470 750 500 1000 780 500 1500 Functionality Product Description • Key Features & Performance EBECRYL LEO 10501 EBECRYL LEO 10502 Trifunctional Diluting Acrylate • High cure response • Good flexibility Polymeric Tetrafunctional Acrylate • High cure response • Low viscosity • Good flexibility • High gloss Amine Modified Polyether Acrylate • Very high cure response • Low viscosity • Good flexibility • High gloss Amine Modified Polyether Acrylate • Very high cure response • Good flexibility • High gloss Amine Modified Polymeric Tetrafunctional Acrylate • Partially based on renewable resources • Good pigment wetting • Good reactivity • Excellent printability Modified Epoxy Acrylate • Very high cure response • Excellent solvent resistance • High gloss • Good pigment wetting Hexafunctional polyester acrylate • High reactivity • Very good pigment wetting • Very good lithographic behavior in UV offset inks 3 70 (25°C) 0.14 1. g/ml at 25°C 1. mg KOH/g 9 .15 1.4 0.5 71 (25°C) — — 0.4 213 (25°C) — — 0. cP Acid Value .3 EBECRYL LEO 10552 3.4 EBECRYL LEO 10801 6 49684 (25°C) 10 — dark (1) Not a specification Density. % Color.10 1.9 — 0.03 0.5 545 (25°C) — — 0.3 — (49) 4 160 (25°C) 1.3 EBECRYL LEO 10601 2 200000 (25°C) 1774 (60°C) 0.EBECRYL® LEO Resins LEO Resins Typical Properties (1) Epoxy content.09 1. and quinones • Good abrasion resistance • Excellent flexibility • Exceptional toughness Aliphatic Urethane Triacrylate • Toughness • Very good abrasion resistance • Good stain resistance • Flexible Aliphatic Urethane Triacrylate • Toughness • Very good abrasion resistance • Good stain resistance • Flexible Aliphatic Urethane Diacrylate • Good flexibility • Relatively soft • Adhesion Aliphatic Urethane Diacrylate • Regulation friendly for tin.10 1. and quinones • Good flexibility • Good adhesion • Exterior durability • Abrasion resistance 2 — 44014 (25°C) 3.4 4200 37 EBECRYL 265 3 TPGDA 25% 36486 (25°C) 1530 (60°C) 0.3 4500 44 EBECRYL 270 2 TPGDA <10% 132500 (25°C) 3084 (60°C) 0.13 1. % Functionality Tensile Strength. cP . °C 46 54 42 38 -27 19 • Key Features & Performance Diluting Acrylate Product Description EBECRYL 242 2 IBOA 30% 21093 (25°C) 1850 (60°C) 0. psi EBECRYL 230 Aliphatic Urethane Diacrylate • High molecular weight • Soft • Very flexible • Low Tg Aliphatic Urethane Diacrylate • Excellent flexibility • Good adhesion to metal • Good corrosion resistance Aliphatic Urethane Diacrylate • Regulation friendly for tin.2 4045 186 EBECRYL 246 2 — 8830000 (25°C) 60900 (60°C) 0.4 8375 62 EBECRYL 264 3 HDDA 15% 47384 (25°C) 1850 (60°C) 0. heavy metals. heavy metals. Gardner (Pt-Co) Tensile Elongation.2 1200 87 EBECRYL 271 2 — 150000 (25°C) 3894 (60°C) (47) 2020 54 (1) Not a specification 10 Density.12 1.08 1.150 (60°C) (16) 150 83 -55 Tg.04 Viscosity.09 1. g/ml at 25°C 1.EBECRYL® Urethane Acrylates Aliphatic Urethane Acrylates Typical Properties (1) Color.10 1. 2 5900 58 Tg. % Functionality Tensile Strength.5 EBECRYL 4883 2 TPGDA 15% 161000 (25°C) 4904 (60°C) 0.14 1. heavy metals.08 1.11 1. heavy metals. Gardner (Pt-Co) Tensile Elongation.EBECRYL® Urethane Acrylates Aliphatic Urethane Acrylates Typical Properties (1) Color.18 1. g/ml at 25°C 1.16 1.3 2900 83 (1) Not a specification Density.2 6700 2 EBECRYL 1291 6 — 101000 (25°C) 1910 (60°C) 0.2 1070 1 EBECRYL 4833 2 N-vinyl-2pyrrolidone 10% 110000 (25°C) 2817 (60°C) 0.19 1. psi EBECRYL 284 Aliphatic Urethane Diacrylate • Excellent exterior durability • Tough • Flexible Aliphatic Urethane Triacrylate • Regulation friendly for tin. and quinones • Excellent abrasion resistance and stain resistance • Good flexibility and toughness • Good adhesion • Non-yellowing Aliphatic Urethane Hexaacrylate • Good reactivity • Excellent hardness • Outstanding scratch resistance Aliphatic Urethane Hexaacrylate • Regulation friendly for tin.4 7800 120 EBECRYL 4858 2 — 7170 (25°C) 0. °C 50 79 — 80 47 54 4 • Key Features & Performance Diluting Acrylate Product Description EBECRYL 1258 3 HPMA 20% 206000 (25°C) 7390 (60°C) (15) 4590 41 EBECRYL 1290 6 — 85000 (25°C) 2040 (60°C) 0. cP 11 .10 Viscosity.4 5700 3. chemical and impact resistance • Flexibility • Toughness • Exterior durability Aliphatic Urethane Diacrylate • Good flexibility • Abrasion resistance • Exterior durability • Adhesion 2 HDDA 12% 64250 (25°C) 2270 (60°C) 0. and quinones • Excellent scratch and abrasion resistance • High gloss • High surface hardness • Non-yellowing Aliphatic Urethane Diacrylate • Good adhesion to various plastics • Very tough and flexible • Exterior durability Aliphatic Urethane Diacrylate • Low intrinsic viscosity • Abrasion. highly flexible coatings • Compatible with various polyurethane and acrylic beads.18 — — 1. psi EBECRYL 5129 Aliphatic Urethane Hexaacrylate • Fast cure response • Scratch and abrasion resistance • Improved flexibility • Chemical resistance Aliphatic Urethane Tetraacrylate • Outstanding cleanability with long lasting effect • High gloss • Excellent surface hardness • Excellent chemical resistance • Resistant to permanent markers Aliphatic Urethane Acrylate • Easy-to-clean fingerprint without smudge.EBECRYL® Urethane Acrylates Aliphatic Urethane Acrylates Typical Properties (1) Color. g/ml at 25°C 1. % Functionality Tensile Strength. Gardner (Pt-Co) Tensile Elongation.12 1. cP .7 5200 2 (1) Not a specification 12 Density.3 9100 4 Tg.18 1. • Unique long lasting E2C surface effect.2 7750 3 EBECRYL 8311 — — 16932 (25°C) 0. • Resistance to permanent oil markers & inks Aliphatic Urethane Acrylate • Dual functionality.5°C) 0.3 6400 2 EBECRYL 8296 3 — 2474 (60°C) (17) 275 18 EBECRYL 8301-R 6 — 24600 (25°C) 251 (65.38 Viscosity. • Outstanding resistance to mechanical wear. reactive with NCO • Primary hydroxyl groups • Good scratch and abrasion resistance • Excellent reactivity Aliphatic Urethane Acrylate for Haptic Coatings • Soft.5 — 3746 (25°C) 0. • Oil and water repellent – low surface energy. °C 30 — — 68 -1 — — • Key Features & Performance Diluting Acrylate Product Description EBECRYL 8100 4 TMPTA 25% 784 (25°C) 2 5000 2 EBECRYL 8110 — TMPTA ~22% 1687 (25°C) — — — EBECRYL 8210 3.16 1. additives and fillers • Waxy solid at 25°C Aliphatic Urethane Hexaacrylate • Good reactivity • Excellent hardness • Outstanding scratch resistance • Exterior durability Aliphatic Urethane Nanocomposite • Good compatibility and stability • Excellent abrasion resistance • Excellent exterior durability • Low haze development • Good chemical resistance 6 — 15780 (25°C) 733 (60°C) 0. 550% elongation at break • Good milling properties • High gloss • Off-white opaque appearance Aliphatic Urethane Acrylate • Designed for thermoformable UV flexo inks • Very flexible.10 1.8 4200 28 (1) Not a specification Density.2 3726 50 EBECRYL 8501 3 IBOA 15% 36400 (25°C) 1400 (60°C) 0. % Functionality Tensile Strength.2 1100 150 EBECRYL 8465 3 — 1850 (60°C) 0.3 1170 320 EBECRYL 8412 3 DPGDA 15% 27400 (25°C) 1050 (60°C) 0.2 3350 50 Tg.04 1.EBECRYL® Urethane Acrylates Aliphatic Urethane Acrylates Typical Properties (1) Tensile Elongation.14 1. 150% elongation at break • Medium viscosity • Good ink rheology • Good pigment wetting properties • Good reactivity Aliphatic Urethane Acrylate • Excellent exterior durability • Excellent toughness • Low color Aliphatic Urethane Acrylate • Automotive refinish and general metal • Excellent surface cure with low intensity UV • Good wetting of inert and reactive fillers • Excellent adhesion to automotive substrates • Good flexibility and toughness • Low shrinkage upon cure 2 — 14830 (25°C) 507 (60°C) 0.4 3700 18 EBECRYL 8413 2 IBOA 33% 32544 (60°C) — 2200 550 EBECRYL 8414 2 40% 29400 (25°C) 0.10 1. g/ml at 25°C 1. psi EBECRYL 8402 Aliphatic Urethane Diacrylate • Relatively low viscosity • Good adhesion • Outstanding exterior durability Aliphatic Urethane Tetraacrylate • Outstanding exterior durability • Excellent abrasion resistance • Good flexibility Aliphatic Urethane Diacrylate • Outstanding extensibility and flexibility • Useful in screen inks • Good abrasion resistance • Good exterior durability Aliphatic Urethane Acrylate • Automotive refinish and general metal • Excellent surface cure with low intensity UV • Excellent adhesion to automotive substrates • Good flexibility and toughness • Low shrinkage upon cure Aliphatic Urethane Acrylate • Designed for thermoformable UV ink applications • Excellent flexibility.10 Viscosity.2 4000 29 EBECRYL 8411 2 IBOA 20% 149500 (25°C) 7779 (60°C) 0.13 1.13 1.12 1. °C 14 30 -18 — — — 36 • Key Features & Performance Color. cP 13 . Gardner Diluting Acrylate Product Description EBECRYL 8405 4 HDDA 20% 85000 (25°C) 4428 (60°C) 0. cP .2 3400 45 EBECRYL 8804 2 0. g/ml at 25°C 1.18 1. psi EBECRYL 8602 Aliphatic Urethane Acrylate • Regulation friendly for tin.05 1. °C 75 28 59 24 32 58 54 • Key Features & Performance Color. and quinones • Excellent surface hardness and chemical resistance • Excellent weatherability compared to traditional hardcoats • High gloss • Low haze after abrasion resistance Aliphatic Urethane Triacrylate • Excellent abrasion resistance • Good adhesion • Excellent exterior durability • High Tg • Good chemical resistance Aliphatic Urethane Hexaacrylate • Good toughness • Excellent abrasion and stain resistance • Impact resistance • Non-yellowing • Good exterior durability Aliphatic Urethane Acrylate • Abrasion resistance • Toughness • Exterior durability Aliphatic Urethane Diacrylate • Extremely tough • Flexible • Abrasion resistance Aliphatic Urethane Diacrylate • Very good surface reactivity • Good flexibility • Tough • Useful for UV LED.5 TPGDA 20% EOEOEA 8% — 44588 (25°C) 1722 (65. UVA and low intensity UV cure Aliphatic Urethane Diacrylate • Excellent exterior durability • Extremely tough • Undiluted for formulating latitude • Recommended for screen inks and coatings Aliphatic Urethane Diacrylate • Regulation friendly for tin. % Functionality Tensile Strength.3 3279 48 (1) Not a specification 14 Density.16 Viscosity.01 1. and quinones • Extremely tough • Flexible • Abrasion resistance 9 — 86000 (25°C) 3068 (60°C) (32) 5400 1 Tg. heavy metals. heavy metals.EBECRYL® Urethane Acrylates Aliphatic Urethane Acrylates Typical Properties (1) Tensile Elongation.1 5250 63 EBECRYL 8810 2 — 4000000 (25°C) 30340 (60°C) 0.13 1. Gardner (Pt-Co) Diluting Acrylate Product Description EBECRYL 8701 3 — 420000 (25°C) 5440 (60°C) 0.2 1950 54 EBECRYL 8808 2 — 1544000 (25°C) 14950 (60°C) 0.5°C) 3200000 (25°C) 14649 (65.1 7800 4 EBECRYL 8702 6 — 364000 (25°C) 5800 (60°C) 0.4 3000 103 EBECRYL 8807 2 — 258600 (25°C) 7476 (60°C) 0.14 1.16 1.13 1.5°C) 0.4 4700 10 EBECRYL 8800-20R 2. % Functionality Tensile Strength.6 2700 51 (1) Not a specification Density. Gardner Diluting Acrylate Product Description EBECRYL 4827 2 238000 (25°C) 4241 (60°C) 0. °C 49 -6 29 • Key Features & Performance Color.EBECRYL® Urethane Acrylates Aromatic Urethane Acrylates Typical Properties (1) Tensile Elongation.22 1.14 Viscosity.10 1. psi EBECRYL 220 Aromatic Urethane Hexaacrylate • High reactivity • Outstanding hardness • Excellent scratch resistance • Chemical resistance Aromatic Urethane Diacrylate • Flexibility • Impact resistance • Adhesion Aromatic Urethane Diacrylate • Very good abrasion resistance • Toughness • Flexibility 6 28485 (25°C) 660 (60°C) 0.3 8000 3 Tg. g/ml at 25°C 1. cP 15 .2 900 78 EBECRYL 4849 2 HDDA 15% 74170 (25°C) 3435 (60°C) 0. psi EBECRYL 80 Amine Modified Polyether Tetraacrylate • Outstanding reactivity • Moderate viscosity • High gloss • Good chemical resistance Amine Modified Polyether Acrylate • Good reactivity • Very low viscosity • High gloss Amine Modified Polyether Tetraacrylate • Very good reactivity • Low viscosity • High gloss • Chemical resistance Functionalized Nanocomposite Acrylate • Good compatibility and stability • Low viscosity • Excellent reactivity • Outstanding hardness • Low haze development after abrasion Modified Polyester Acrylate • Developed for flexographic narrow web and rotary screen applications • Excellent adhesion to various unprimed filmic substrates • Good cure response • Enhanced cold water resistance Diluted Chlorinated Polyester • 40% TMPTA • Good adhesion • Fast UV cure response • Good lithographic behavior Diluted Chlorinated Polyester • 40% OTA-480 • Good adhesion • Fast UV cure response • Good lithographic behavior Fatty Acid Modified Polyester Hexaacrylate • Good pigment wetting • Good reactivity • Good lithographic behavior 4 2822 (25°C) (53) ― 6800 7 Tg.EBECRYL® Polyether/Polyester Acrylates & Diluted Polyesters Polyether/Polyester Acrylates & Diluted Polyesters Typical Properties (1) Tensile Elongation.26 1. Gardner (Pt-Co) Product Description EBECRYL 81 2.4 2300 1 EBECRYL 438 3 85600 (25°C) 1499 (60°C) 1.04 1. °C 50 -18 6 ― 30 54 37 17 • Key Features & Performance Color. cP Acid Value.08 1.5 ― 2000 13 EBECRYL 154 3 2177 (25°C) ― ― 4000 1 EBECRYL 411 2 1312 (25°C) 6.5 92 (25°C) 0.20 1.7 ― 508 54 EBECRYL 436 3 100000 (25°C) 1503 (60°C) 1.5 ― 790 8 EBECRYL 83 3 515 (25°C) 0.08 1. g/ml at 25°C 1.2 19. % Functionality Tensile Strength.0 19.12 Viscosity.8 4300 4 (1) Not a specification 16 Density.28 1.11 1.4 2800 5 EBECRYL 450 6 8278 (25°C) 420 (60°C) ― 11. mg KOH/g . 0 4000 1 EBECRYL 812 3.5 6000 6 EBECRYL 811 3 90000 (25°C) 2003 (60°C) ― 5.09 1.14 1.EBECRYL® Polyether/Polyester Acrylates & Diluted Polyesters Polyether/Polyester Acrylates & Diluted Polyesters Typical Properties (1) Tensile Elongation.6 7.0 ― ― Tg. PET-G. °C ― ― 44 33 54 31 70 72 • Key Features & Performance Color.5 12.4 3500 18 EBECRYL 810 4 453 (25°C) 0. cP Acid Value.03 1. % Functionality Tensile Strength.4 5.6 4300 23 EBECRYL 809 3.22 1.14 1.5 36000 (25°C) 1276 (60°C) 0.14 Viscosity.14 1. Gardner (Pt-Co) Product Description EBECRYL 524 2 61234 (25°C) 2000 (60°C) (45) 33.1 1160 20 EBECRYL 657 4 103500 (25°C) 3585 (60°C) ― 12. SBS and PLA • Excellent shrink properties • Shrink and contour without discoloration • Excellent wrinkle resistance • 40% DPGDA Polyester Tetraacrylate • Good pigment wetting • Excellent lithographic behavior • Good anti-misting properties Modified Polyester Acrylate • Moderate viscosity • Good flexibility • Surface hardness • Toughness Polyester Tetraacrylate • Low viscosity • Hardness • Chemical resistance • Adhesion Lithographic Ink Varnish • Wet or dry offset for plastic substrates • Very low misting • Excellent water balance Polyester Acrylate • Pigment grind vehicle for flexo inks • Outstanding color development • Good adhesion to plastics and papers 4 769 (25°C) ― 7. g/ml at 25°C 1. psi EBECRYL 452 Polyester Tetraacrylate • Excellent pigment wetting properties • Low viscosity • Good cure response Diluted Acidic Polyester • 30% HDDA • Good adhesion • Moderate flexibility Diluted Acidic Polyester • Developed for heat shrink sleeve inks • Excellent adhesion to shrink PVC. mg KOH/g 17 .5 8 5700 2 (1) Not a specification Density.11 1.5 9320 (25°C) 340 (60°C) 1.9 1000 30 EBECRYL 571 2 9232 (25°C) 0. Gardner Product Description EBECRYL 870 6 43070 (25°C) 2340 (60°C) ― 11.7 (1) Not a specification 18 Density.18 1.19 1.4 ― 1422 2. and scratch resistance.11 Viscosity. °C 60 41 23 21 ― ― ― • Key Features & Performance Color.0 11165 4 Tg. • Good chemical and solvent resistance • High gloss 6 49300 (25°C) 990 (65°C) 0.EBECRYL® Polyether/Polyester Acrylates & Diluted Polyesters Polyether/Polyester Acrylates & Diluted Polyesters Typical Properties (1) Tensile Elongation. mg KOH/g .6 508 44 EBECRYL 888 3.5 3400 (25°C) 3 ― ― ― EBECRYL 889 4 32300 (25°C) 3 ― ― ― EBECRYL 893 3.3 4500 5 EBECRYL 871 6 47450 (25°C) 5.1 1.3 7.07 1.3 22. hardness. % Functionality Tensile Strength.3 5100 4 EBECRYL 885 3 35963 (25°C) 0.08 1. psi EBECRYL 830 Polyester Hexaacrylate • Hardness • Abrasion/scratch resistance • Chemical resistance Fatty Acid Modified Polyester Hexaacrylate • Rheology suited for lithographic inks • Good pigment wetting • High reactivity • Good solvent resistance Lithographic Ink Varnish • Excellent pigment wetting • Good water balance • Good reactivity • Low misting • Excellent printability Polyester Triacrylate • Excellent abrasion resistance • High flexibility • Good reactivity • Moderate viscosity Polyester Acrylate • Excellent adhesion • Excellent ink receptivity • High flexibility • Low viscosity Polyester Tetraacrylate • Designed for energy curable publication inks • Adhesion to super-calendered paper • Lower ink tack & misting • High gloss & excellent printability Modified Polyester Acrylate • For UV curable field applied floor coatings • Resistant to yellowing upon cure and aging • Low viscosity • Fast cure • Adhesion. g/ml at 25°C 1.5 7. cP Acid Value.5 580 (25°C) 0.19 1. 5 1900 52 EBECRYL 1300 1 IBOA 70% 0.1 — — EBECRYL 1710 2 HDDA 60% 24480 (25°C) 2300 (60°C) 0.5 6400 4 (1) Not a specification Density. Gardner Diluting Acrylate Product Description EBECRYL 745 2 HDDA 23% TPGDA 23% 22479 (25°C) 1900 (60°C) 9858 (25°C) 1. non-blocking systems • Good temperature resistance • Low shrinkage (1.2 — — Tg.EBECRYL® Polymer/Diluent Blends Polymer/Diluent Blends Typical Properties (1) Tensile Elongation.07 Viscosity.05 1. cP 19 .03 1. % Functionality Tensile Strength. °C — 30 — 82 • Key Features & Performance Color.10 1. psi EBECRYL 303 Diluted Hydrocarbon Polymer • Light color • Low viscosity • Improved adhesion • Good exterior durability Diluted Acrylic Polymer • Excellent substrate adhesion • Intercoat adhesion • Flexibility Diluted Acrylic Polymer • Themoformability • Tack-free state after cure.2%) • Excellent intercoat adhesion • Good adhesion to a variety of untreated plastics Diluted Acrylic Polymer • Improved adhesion • Film formation • Exterior durability 2 HDDA 45% 577 (25°C) 0. g/ml at 25°C 1. 0 1.03 1.5 8.A Epoxy Diacrylate • EBECRYL 600 with 25% OTA-480 • Reduced viscosity • Easier handling Epoxidized Soya Oil Tetraacrylate • Good flow and leveling • Pigment wetting • Adhesion Low Viscosity Epoxy Acrylate • Handling ease • Flexibility • Pigment wetting Aliphatic/Aromatic Epoxy Acrylate • Low viscosity • Flexibility • Outstanding wetting and flow Fatty Acid Modified Epoxy Diacrylate • Flow and leveling • Pigment wetting • Low viscosity • Flexibility 2 600000 (25°C) 3543 (60°C) 0.7 2300 20 EBECRYL 3411 2 40100 (25°C) 807 (60°C) 4.17 1. °C 67 92 83 13 48 8 52 • Key Features & Performance Color.9 8300 7 EBECRYL 608 2 26043 (25°C) 655 (60°C) 0.15 1. Gardner Product Description EBECRYL 605 2 7617 (25°C) 248 (60°C) 0. % Functionality Tensile Strength.10 1. psi EBECRYL 600 Bisphenol.5 1.3 1000 20 EBECRYL 3200 1.1 13900 7 Tg.6 0.3 11900 6 EBECRYL 3201 1.1 7100 9 (1) Not a specification 20 Density. g/ml at 25°C 1.6 2235 (25°C) 1.5 0.5 0.EBECRYL® Epoxy Acrylates Epoxy Acrylates Typical Properties (1) Tensile Elongation. mg KOH/g .13 Viscosity.A Epoxy Diacrylate • High reactivity • Low color • High gloss • Excellent solvent resistance Bisphenol.9 3597 (25°C) 2.17 1.5 1.7 8700 6 EBECRYL 860 4 26518 (25°C) 990 (60°C) 6.A Epoxy Diacrylate • EBECRYL 600 with 25% TPGDA • Reduced viscosity • Easier handling Bisphenol.13 1. cP Acid Value. 10 1.5 0.18 Viscosity.8 ― 4067 15 EBECRYL 3500 2 60000 (25°C) 1184 (60°C) 2.5 2.A Epoxy Diacrylate • High reactivity • Excellent solvent resistance • High gloss Modified Bisphenol.7 11400 7 EBECRYL 3701-20T 2 89500 (25°C) 925 (65.5 17500 (25°C) 1250 (60°C) 0.0 2.A Epoxy Diacrylate • Improved flexibility • Toughness • Increased adhesion • High reactivity Modified Bisphenol.5°C) 1.5°C) 2. % Functionality Tensile Strength.5 0. °C 68 ― 35 59 65 52 62 • Key Features & Performance Color.12 1.7 1.18 1.5 6500 43 EBECRYL 3600 2 232000 (25°C) 1334 (65.EBECRYL® Epoxy Acrylates Epoxy Acrylates Typical Properties (1) Tensile Elongation.3 14200 7 (1) Not a specification Density.2 12000 5 EBECRYL 3701 2 1600000 (25°C) 3996 (65. psi EBECRYL 3415 Modified Epoxy Diacrylate • Adhesion to plastic substrates • Good pigment milling properties • Very useful in screen inks • 40% HDDA Modified Epoxy Diacrylate • Excellent UV/EB cure response • High flexibility • Good chemical resistance • High gloss • Toughness • Excellent adhesion to most types of wood and many plastics Modified Epoxy Diacrylate • Increased toughness • Moderate viscosity • Chemical resistance • High gloss Amine Modified Epoxy Diacrylate • Exceptional reactivity • Hardness • High gloss • Chemical resistance Bisphenol. Gardner Product Description EBECRYL 3418 2 17845 (25°C) 540 (60°C) 0. cP Acid Value.1 6800 3 Tg.18 1.5 2. mg KOH/g 21 .A Epoxy Diacrylate • EBECRYL 3701 with 20% TMPTA • Reduced viscosity • Easier handling 1.1 12300 8 EBECRYL 3700 2 800000 (25°C) 2317 (65.5°C) 3. g/ml at 25°C 1.17 1.5°C) 2.19 1. 5 1.5 5900 47 EBECRYL 3708 2 190000 (25°C) 3475 (60°C) 1.14 1.0 2.5°C) 2. cP Acid Value. °C 56 57 21 67 91 101 80 • Key Features & Performance Color.5°C) 4.5 0. psi EBECRYL 3702 Fatty Acid Modified Epoxy Diacrylate • Flow and leveling • Pigment wetting • Increased flexibility Amine Modified Epoxy Diacrylate • Exceptional reactivity • Increased flexibility • High gloss • Improved adhesion Modified Bisphenol.8 8300 4 (1) Not a specification 22 Density.5 0. Gardner Product Description EBECRYL 3703 2 320000 (25°C) 2117 (65.16 1.A Epoxy Diacrylate • EBECRYL 3720 with 40% TMPTA • Reduced viscosity • Easier handling 2 495000 (25°C) 2249 (65.A Epoxy Diacrylate • Standard epoxy diacrylate • Light color • High reactivity • Solvent resistance • High gloss Bisphenol.0 1.18 1.7 1094 110 EBECRYL 3720 2 750000 (25°C) 1960 (65.5°C) 0.5 1.A Epoxy Diacrylate • Very good flexibility • Impact resistance • Good reactivity Bisphenol.6 11000 8 EBECRYL 3720-HD20 2 8203 (25°C) 320 (60°C) 0. mg KOH/g .17 1.A Epoxy Diacrylate • EBECRYL 3720 with 20% TMPTA • Reduced viscosity • Easier handling Bisphenol.14 1.5 0.A Epoxy Diacrylate • EBECRYL 3720 with 20% HDDA • Reduced viscosity • Easier handling Bisphenol.18 1.0 9400 6 EBECRYL 3720-TM40 2 7085 (25°C) 235 (60°C) 0.7 9900 7 EBECRYL 3720-TM20 2 44000 (25°C) 759 (60°C) 0.1 9500 10 Tg.EBECRYL® Epoxy Acrylates Epoxy Acrylates Typical Properties (1) Tensile Elongation. g/ml at 25°C 1. % Functionality Tensile Strength.15 Viscosity. EBECRYL® Epoxy Acrylates Epoxy Acrylates Typical Properties (1) Tensile Elongation. cP Acid Value.7 9800 4 Tg. g/ml at 25°C 1.A Epoxy Diacrylate • EBECRYL 3720 with 25% TPGDA • Reduced viscosity • Easier handling Bisphenol.5 0. °C 96 80 99 • Key Features & Performance Color.A Epoxy Diacrylate • Improved wetting • Chemical resistance • High gloss • 20% TPGDA 2 10962 (25°C) 315 (60°C) 0. Gardner Product Description EBECRYL 3720-TP40 2 2050 (25°C) 100 (60°C) 0. mg KOH/g 23 .15 Viscosity.A Epoxy Diacrylate • EBECRYL 3720 with 40% TPGDA • Reduced viscosity • Easier handling Modified Bisphenol.14 1. psi EBECRYL 3720-TP25 Bisphenol.5 0. % Functionality Tensile Strength.6 7400 3 EBECRYL 3730-TP20 2 35500 (25°C) 686 (60°C) 1.2 0.3 9800 3 (1) Not a specification Density.14 1. Pt-Co (Gardner) Monofunctional • Key Features & Performance β-CEA average n = 1 ß-Carboxyethyl Acrylate • Predominately acrylic acid dimer • Acrylate and carboxylic acid functionality • Adhesion promoter for glass. % . mg KOH/g 365 (0.2 0. low Tg • Hydrophobic 2.01) 0.5 7 0.5) ― 0.03 ― ODA-N Octyl acrylate Octyl/Decyl Acrylate • Excellent diluency • Flexibility. metal.88 1.5 Residual Solvent.5 11 0.12 0. g/ml at 25°C 1.10 Water.Diluting Acrylates Diluting Acrylates Typical Properties (1) Color.7) ― ― EBECRYL 114 10 24 ― ― (1) Not a specification 24 Density.4 0.97 1.81 ― Acid Value. paper Isobornyl Acrylate • High purity. low color • Flexibility without softening • Increased Tg 73 35 0.0) (0.018 Decyl acrylate EBECRYL® 110 Oxyethylated Phenol Acrylate • Reduced odor • Good diluency 22 (0.006 n~2 EBECRYL 113 Aliphatic Acrylate • Low odor • Good pigment wetting • Good reactivity • Increased flexibility • Improved adhesion 2-Phenoxyethyl Acrylate • Low viscosity • Good diluency • Improved adhesion • Beneficial in screen inks 120 (0.97 0.03 0.21 0. % Viscosity cP at 25°C Product Description IBOA 9. 13 Acid Value. Pt-Co (Gardner) Difunctional • Key Features & Performance DPGDA Dipropylene Glycol Diacrylate • Good diluency • Improved flexibility.3 8 0.16 0.003 EBECRYL 152 Letdown Vehicle for UV Inkjet • For piezo inkjet head systems • Produces low viscosity inks • Low odor • Low color • High reactivity • Good adhesion to treated plastics and coated papers 21 (0.4) ― ― (1) Not a specification Density.08 0.5 2.6-Hexanediol Diacrylate • Good weatherability • Excellent diluency • Adhesion Neopentyl Glycol Propoxylate(2) Diacrylate • Increased flexibility • Lower surface tension • Improved adhesion n+m~2 9.2 36 0. g/ml at 25°C 1. % Viscosity cP at 25°C Product Description HDDA 6. % 25 .14 1.03 0.11 0.003 TPGDA Tripropylene Glycol Diacrylate • Branched alkyl polyether backbone • Combines flexibility.01 1.06 1.05 NPG(PO)2DA 15.03 1.007 1.Diluting Acrylates Diluting Acrylates Typical Properties (1) Color.04 0.5) ― ― EBECRYL 150 1347 (0.5) ― 0.8 11 0.7 ― Residual Solvent.09 1.07 Water. moisture resistance. low viscosity and good reactivity without causing brittleness Tricyclodecanediol Diacrylate • Good adhesion • Low volumetric shrinkage • Good hardness • Increase barrier properties Bisphenol-A Ethoxylate Diacrylate • High reactivity • Hardness • Chemical resistance n+m~4 11.14 0. adhesion • Reactivity 1.03 EBECRYL® 130 171 (0.07 0. mg KOH/g 0.9 48 0.2 0. 02 0.10 Water. TMPTA 1044 30 ― 0.010 O O O x O O z O y O x + y + z ~ 3. Pt-Co (Gardner) Tri & Higher Functional • Key Features & Performance DPHA Acrylated Dipentaerythritol • Increased crosslinking • High reactivity • Excellent hardness.Diluting Acrylates Diluting Acrylates Typical Properties (1) Color.03) 0.007 TMPEOTA 70 40 0. hardness.01 x+y+z~3 (1) Not a specification 26 Density. g/ml at 25°C 1.acrylate ester ratio ~ 1 to 1 • Liquid at normal ambient temperature • High reactivity • Very good hardness. % Viscosity cP at 25°C Product Description OTA-480 O O Propoxylated Glycerol Triacrylate • Good reactivity • Crosslinking.8 0. chemical resistance without brittleness • Pigment wetting 88 42 0. mg KOH/g (0.5 PETIA Pentaerythritol Tri-Tetraacrylate • Tetra. scratch resistance • Pendant hydroxyl functionality Trimethylolpropane Ethoxy Triacrylate • Good diluency • High UV reactivity • Increased flexibility vs.16 6. scratch resistance • Chemical resistance • Pendant hydroxyl functionality • Mixture of penta.08 1.014 Acid Value.18 1. % .16 0.to Tri.1 Residual Solvent.8) ― 0.and hexaacrylate 17093 (0.17 10. % (ppm) Tri & Higher Functional • Key Features & Performance TMPTA Trimethylolpropane Triacrylate • Increases crosslinking • Imparts hardness • Chemical resistance • Good reactivity 115 35 0.5 (1) Not a specification Density.03 0.08 1. % 27 .002 0. mg KOH/g Water.08 Color.15 1.3 EBECRYL® 140 Ditrimethyolpropane Tetraacrylate • High crosslinking • Increased hardness • Good chemical resistance • Improved abrasion/scratch resistance 979 85 ― 0. scratch resistance • Pendant hydroxyl functionality 603 29 0. Pt-Co (Gardner) Product Description Viscosity cP at 25°C Acid Value.Diluting Acrylates Diluting Acrylates Typical Properties (1) Residual Solvent.01 0.6) ― 0.2 x + y + z ~ 3.18 1.acrylate ester ratio ~2 to 1 • Crystallizes at normal ambient temperature • High reactivity • Excellent hardness.002 1.02 (2) 0.64 EBECRYL 40 Polyether Tetraacrylate • Good reactivity • Hardness without brittleness • Chemical resistance • Improved abrasion/scratch resistance Propoxylated Glycerol Triacrylate • Purified version of OTA-480 • Lower residual odor • Reduced residual acrylic acid • Reduced residual solvent 148 (0.4 EBECRYL 53 94 43 0.to Tri.008 5.1 EBECRYL 180 Pentaerythritol Tri-Tetraacrylate • Tetra.01 0. g/ml at 25°C 1.10 1. g/ml at 25°C 1.ADDITOL® & EBECRYL® Additives Additives Typical Properties (1) Color.5 (1) Not a specification 28 Density.4 17.11 . non-migratory Silicone Hexaacrylate • COF reduction. increased slip • Improved substrate wetting • Non-migratory • Particularly effective in EB 2 288 7.5 282 Acid Value 288 2.05 1.29 1.5 EBECRYL 1360 6 1327 6. Wetting EBECRYL 350 Silicone Diacrylate • COF reduction. increased slip • Improved substrate wetting • Copolymerizable.0 Viscosity cP at 25°C Product Description EBECRYL 170 2 3245 3 Flow.33 1. Gardner Functionality • Key Features & Performance Adhesion Promoters EBECRYL 168 Acidic Methacrylate • Excellent adhesion promotion on metal • Increased compatibility compared to EBECRYL 170 Acidic Acrylate • Excellent adhesion promotion on metal • Increased reactivity compared to EBECRYL 168 2 1466 0. Leveling. 10 1.8 Viscosity. mg KOH/g ― ― ― ― ― 1.4 ― 223 EBECRYL 7100 1202 0.19 29 . cP at 25°C Product Description EBECRYL P115 22 0.ADDITOL® & EBECRYL® Photoinitiators Photoinitiators Typical Properties (1) Color. litho and screen inks Liquid Photoinitiator • Effective in white inks at 5-10% levels • Photobleaches • Also useful in yellow inks • Useful in flexo. g/ml at 25°C 1. litho and screen inks • Pourable liquid 64 10 <25 ― ADDITOL LX 182 6 <25 ― Hydrogen Abstraction EBECRYL P39 Acrylated Benzophenone Derivative • UV coatings and inks with very low residual odor • Low vapor pressure and volatility • Contains 25% EBECRYL LEO 10501 9300 5 ― ― (1) Not a specification Density.01 0. Gardner Melting Point.99 1.10 1.10 1.7 ― 300 Acid Value.8 ― 400 Mixtures ADDITOL DX Liquid Photoinitiator • Effective in colored inks at 5-10% levels • Pourable liquid • Useful in flexo. °C Weight per Amine • Key Features & Performance Amine Synergists EBECRYL P104 Acrylated Amine • Improved stability • Reduced odor • Decreased moisture sensitivity Copolymerizable Amine • Improved stability • Reduced odor • Decreased moisture sensitivity Acrylated Amine • Improved stability • Reduced odor • Decreased moisture sensitivity • Adhesion 10 0. The number of bullets in each performance property column represents a relative ranking for that product within its product family. Better performance is indicated by more bullets. To compare the performance of products from different product families. UV/EB Reactivity Weatherability Chemical Resistance Moisture Resistance Abrasion Resistance Epoxy Acrylates EBECRYL® 600 EBECRYL 605 EBECRYL 608 EBECRYL 860 EBECRYL 3200 EBECRYL 3201 EBECRYL 3411 EBECRYL 3415 EBECRYL 3418 EBECRYL 3500 EBECRYL 3600 EBECRYL 3700 EBECRYL 3701 EBECRYL 3701-20T EBECRYL 3702 EBECRYL 3703 EBECRYL 3708 EBECRYL 3720 EBECRYL 3720-HD20 EBECRYL 3720-TM20 EBECRYL 3720-TM40 EBECRYL 3720-TP25 EBECRYL 3720-TP40 EBECRYL 3730-TP20 5                         3                         3                         4                         Flexibility Hardness Adhesion Viscosity Resins 2                         1                         5                         3                         2                                                 30 Scratch Resistance 3 . The higher numeral indicates increased performance for that family. multiply the number of bullets by the numeral.Product Selection Guide Selection Guide . increased performance equals lower viscosity.Resins and Diluting Acrylates The following table provides a comparison of select performance properties for the resin and diluent products. Each product family is assigned a relative ranking for each performance property represented by the numeral just below the column heading. For example. Note: For the performance category of viscosity. comparing the reactivity of the of the epoxy acrylate EBECRYL 3700 (••••) x 5 = 20) to that of the aliphatic urethane acrylate EBECRYL 1290 (••••• x 3 = 15) indicates that EBECRYL 3700 has the superior reactivity. Product Selection Guide Weatherability Chemical Resistance Moisture Resistance Abrasion Resistance Aliphatic Urethane Acrylates EBECRYL® 230 EBECRYL 242 EBECRYL 246 EBECRYL 264 EBECRYL 265 EBECRYL 270 EBECRYL 271 EBECRYL 284 EBECRYL 1258 EBECRYL 1290 EBECRYL 1291 EBECRYL 4833 EBECRYL 4858 EBECRYL 4883 EBECRYL 5129 EBECRYL 8100 EBECRYL 8110 EBECRYL 8210 EBECRYL 8296 EBECRYL 8301-R EBECRYL 8311 EBECRYL 8402 EBECRYL 8405 EBECRYL 8411 EBECRYL 8412 EBECRYL 8413 EBECRYL 8414 EBECRYL 8465 EBECRYL 8501 EBECRYL 8602 EBECRYL 8701 EBECRYL 8702 EBECRYL 8800 EBECRYL 8800-20R EBECRYL 8804 EBECRYL 8807 EBECRYL 8808 EBECRYL 8810 3                                       3    Viscosity Resins 2                                       2    3                                       3    4                                       3    5                                       5    5                                       2    2                                       3    4                                       4    5                                       5                                 5    Aromatic Urethane Acrylates EBECRYL 220 EBECRYL 4827 EBECRYL 4849 Scratch Resistance 5          UV/EB Reactivity Flexibility Hardness Adhesion 31 . Product Selection Guide UV/EB Reactivity Weatherability Chemical Resistance Moisture Resistance Abrasion Resistance Polyether/ Polyester Acrylates & Diluted Polyesters EBECRYL® 80 EBECRYL 81 EBECRYL 83 EBECRYL 154 EBECRYL 411 EBECRYL 436 EBECRYL 438 EBECRYL 450 EBECRYL 452 EBECRYL 524 EBECRYL 571 EBECRYL 657 EBECRYL 809 EBECRYL 810 EBECRYL 811 EBECRYL 812 EBECRYL 830 EBECRYL 870 EBECRYL 871 EBECRYL 885 EBECRYL 888 EBECRYL 889 EBECRYL 893 4 5 3 3 Flexibility Hardness Adhesion Viscosity Resins 2 3 3 2 3                        2                            1                            5                            2                            3                            4                            2                            4                            2                         1     Acrylic Acrylates EBECRYL 303 EBECRYL 745 EBECRYL 1300 EBECRYL 1710 32 Scratch Resistance 4    . Product Selection Guide UV/EB Reactivity Weatherability Chemical Resistance Moisture Resistance Abrasion Resistance Diluting Acrylates Monofunctional β-CEA IBOA ODA-N EBECRYL® 110 EBECRYL 113 EBECRYL 114 2 5 4 1 Flexibility Hardness Adhesion Viscosity Diluting Acrylates 5 3 2 3 2       3       4       3       3       2       4       2       3       3      3 Diluting Acrylates Difunctional DPGDA HDDA NPG(PO) 2DA TPGDA EBECRYL 130 EBECRYL 150 EBECRYL 152        4        3        2        5        1        3        4        3        3        4 Diluting Acrylates Trifunctional & Higher DPHA OTA-480 PETIA TMPEOTA TMPTA EBECRYL 140 EBECRYL 180 EBECRYL 40 EBECRYL 53                                                                                           Scratch Resistance 1  33 . reduced odor. especially lighter colored inks Inks and coatings requiring low residual odor. reduced odor.Plastics/Metal Clear . Improved stability. litho and screen inks. increased adhesion ADDITOL LX Liquid photoinitiator blend C C X EBECRYL® P39 Polymeric Photoinitiator X X EBECRYL P104 EBECRYL P115 Acrylated amine synergist Copolymerizable amine synergist Acrylated amine synergist C C C C C C X X C C EBECRYL 7100 C C C X C X = highly recommended  C = used in combination 34 . Use in place of benzophenone. litho and screen inks.Wood Over Print Varnish ADDITOL DX Liquid photoinitiator blend C C X Non Yellowing Photoinitiator Description Clear . reduced odor. increased reactivity Improved stability. low viscosity Improved stability. especially darker colored inks X Effective in flexo.Wood Synergist needed X Remarks Inks Effective in flexo.Photoinitiator Selection Guide Pigmented .Plastics/Metal Pigmented . Measured on the UV cured homopolymer of the product. Theoretical number of acrylate double bonds per molecule. reported in microns. expressed in percent. or iodine scales. measured on the UV cured homopolymer of the product. ©2013 Allnex Group. unregistered or pending trademarks of Allnex Belgium SA or its directly or indirectly affiliated Allnex Group companies.range from light yellow to red defined by the chromaticities of glass standards numbered from 1 for the lightest to 18 for the darkest. expressed in grams per milliliter. For colors registering 1 or less on the Iodine scale.128 = % acrylic acid acid value x 0. The temperature at which a continuous film is formed after the evaporation of volatile materials from a dispersion or emulsion. All Rights Reserved. The mean size of the particles in dispersion. Average molecular weight per amine group. • Pt-Co . ™ or * are registered. The information contained herein represents Allnex's best knowledge thereon without constituting any express or implied guarantee or warranty of any kind (including. • Iodine . The amount. Glass transition temperature in °C of the UV cured homopolymer of the product as measured by dynamic mechanical analysis (DMA). The information relating to the products is given for information purposes only. but not limited to. Also known as elastic modulus. the Platinum-Cobalt Units are applicable. ranging from 1 for the lightest color to 500 for the darkest. Average elongation (strain) at break expressed as the percent change in the gauge length. The calculated weight based on the theoretical chemical composition. Disclaimer: Allnex Group companies (“Allnex”) decline any liability with respect to the use made by anyone of the information contained herein.Key to the Tables Key Word Description Expressed in mg KOH per gram. 35 . No guarantee or warranty is provided that the product and/or information is adapted for any specific use. The user should perform its own tests to determine the suitability for a particular purpose. Mass per unit of volume at 25°C. Nothing contained herein shall be construed as conferring any license or right under any patent or other intellectual property rights of Allnex or of any third party. cP = mPa•s. Note: acid value x 0. acid value is reported as weight % acrylic acid. the force required to elongate a material and calculated from the ratio of stress to strain. of the non-volatile material remaining from a solution or dispersion when heated at a specified time and temperature. performance or result and that product and/or information do not infringe any Allnex and/or third party intellectual property rights. pH increases with alkalinity and decreases with acidity over a range of 0-14. Pt-Co (APHA). It is indicative of the stiffness or rigidity of a material. regarding the accuracy. For some materials. The measure of the acidity or alkalinity of an aqueous product. ranging from 0 at the light end of the scale to 500 at the darkest. • Gardner . The final choice of use of a product and/or information as well as the investigation of any possible violation of intellectual property rights of Allnex and/or third parties remains the sole responsibility of the user.1497 = % methacrylic acid Average values in Gardner.ranges from yellow to brown defined by specified dilutions of an iodine solution. Average stress in pounds per square inch at break. Minimum film formation temperature. measured on the UV cured homopolymer of the product. Acid Value Color Density Elongation Functionality MFFT Molecular weight Particle size pH Solids Tensile Strength Tg Viscosity Weight per Amine Young’s Modulus All About Resins Notice: Trademarks indicated with the ®. Numerically equal to 7 for neutral. Viscosity in centipoise (cP) or poise (P) measured at 25°C and at the sales specification temperature if other than 25°C.defined by specified dilutions of a platinum-cobalt stock solution. the completeness or relevance of the data set out herein). GA 30080 USA www.allnex.AFRICA ASIA AUSTRALIA EUROPE NORTH AMERICA SOUTH AMERICA Allnex Global Operational Headquarters Square Marie Curie 11 1070 Anderlecht – Brussels BELGIUM Allnex Americas Region Headquarters 1950 Lake Park Drive Smyrna.com RAD-0003-EN-AM-0813 .