Product Catalog Thf

Product Catalogue 2012www.outokumpu.com OSTP OSTP 1345-EN-GB:3. RCB2, 1082, Sweden. November 2011. Information given in this catalogue may be subject to alterations without notice. Care has been taken to ensure that the contents of this publication are accurate but Outokumpu and its affiliated companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for or descriptions of the end use or application of products or methods of working are for information only and Outokumpu and its affiliated companies accept no liability in respect thereof. Before using products supplied or manufactured by the company the customer should satisfy himself of their suitability. OSTP – Outokumpu Stainless Tubular Products Threaded Fittings Product Catalogue 2012 Integrated CAD-support ­feature! Click on any OT-No on the following pages for quick and easy online CADsupport! This feature needs Internet access. Table of contents Outokumpu . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 OSTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Threaded Fittings 8 Couplings OT 1310–1317 . . . . . . . . . . . . . . . . . . . . . 15 Union-L, OT 3330 . . . . . . . . . . . . . . . . . . . . . 18 Bite-ring couplings OT 1321–1326 . . . . . . . . . . . . . . . . . . . . . 19 Sockets OT 2010–2030, OT 4020–4080 . . . . . . . . 22 Nipples OT 2060–2120, OT 2280 . . . . . . . . . . . . . 25 Plugs OT 2350–2380 . . . . . . . . . . . . . . . . . . . . . 30 Caps OT 2310–2320 . . . . . . . . . . . . . . . . . . . . . 31 Nuts OT 2160–2170 . . . . . . . . . . . . . . . . . . . . . 32 Hose fittings OT 1400–1460 . . . . . . . . . . . . . . . . . . . . . 33 Tees, elbows and bends OT 2210–2260 . . . . . . . . . . . . . . . . . . . . . 35 Socket welding fittings OT 1318–2221 . . . . . . . . . . . . . . . . . . . . . 37 Miscellaneous  Tubular terminology, designations and abbreviations . . . . . . . . . . . . 40 Stainless steel grades . . . . . . . . . . . . . . . . . . . . 41 Mechanical and physical properties . . . . . . . . 42 Material selection and design . . . . . . . . . . . . . 43 Certifications and approvals . . . . . . . . . . . . . . . 45 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3 Outokumpu 4 We are dedicated to helping our customers gain a competitive advantage by supplying a wide range of products such as plate. coil. We activate your ideas. Outokumpu Oyj. Our vision is to be the undisputed number one in stainless. stainless steel equipment. What makes Outokumpu special is total customer focus – all the way from R&D to delivery. You have the idea! We offer the world´s best stainless steel. of which around 95% was generated outside Finland. as well as catering and household – use our products. tailor blanks. The parent company. has been listed on the Helsinki stock exchange since 1988. electronics and information technology. construction and electrical industries. technical know-how and support. Group headquarters are located in Espoo. tubular products as well as technical support.23 billion. The stainless tubes and fittings operations are organized under the joint-venture between Outokumpu and Tubinoxia: OSTP – Outokumpu Stainless Tubular Products. Finland. with success based on operational excellence. bar. 5 . In 2010. technologies and services worldwide.Outokumpu Outokumpu in brief Outokumpu is an international stainless steel company. Outokumpu operates in some 30 countries and employs 6 700 people. Customers in a wide range of industries – from the process industry and industrial machinery to the building. transportation. the Group’s sales were EUR 4. OSTP 6 . OSTP provides clients with world-class knowledge and experience in welded stainless steel Tubes and Fittings. OSTP is a joint-venture between Outokumpu Group and Tubinoxia. dimensions and surface finishes through our worldwide network of sales offices and service centres. Finland 7 . The group offers the broadest range of stainless steel products on the market. Thousands of articles are manufactured from tubes and bars with ultra-modern CIM steered CNC-machines to the industries' highest quality demands. OSTP is today Europe’s largest manufacturer within its branch. Estonia Tuusula. Together with our mills in Tuusula and Tallinn. Threaded fittings of stainless steel have for more than 70 years been manufactured in our main mill in Molkom. Sweden Tallinn. We can supply a wide variety of grades. cost efficient production lines. Molkom. Sweden. With a network of distributors in more than 40 countries and modern.OSTP Operational excellence OSTP focus on providing world class stainless steel process pipe and butt-welded fittings. sockets. Technical information • • • • Benefit: Threaded fittings are produced from tubes and bars for highest quality. Application: Anywhere you need a reliable and safe tube connection. This allows the use of these products in applications according to category IV in the PED Directive. All manufactured products are approved by a Notified Body to the European Pressure equipment PED 97/23/EC and by TÜV certified to AD 2000 Merkblatt W0.are also available from stock with NPT threads.R 1½” ISO 7/2 deals with the inspection of these threads. taper external according to ISO 7/1 - male threads. double nipples and welding nipples .G1½”B Wider class of tolerance G…B = Parallel external ISO 228/2 deals with the inspection of these threads. taper internal according to ISO 7/1 NPT threads Fittings with NPT threads (American Standard National Pipe Thread) are available upon request. Threads Whitworth threads Threaded fittings have Whitworth pipe threads (BSP) as standard: - male threads. Material: See each data sheet for steel grades. G = Parallel internal ISO 228/1 . An extensive stock programme together with Outokumpu Stainless distribution network secures a high ­availability and fast delivery service for any application.G1½”A Tighter class of tolerance ISO 228/1 . Pipe threads where pressure-tight joints are not made on the threads. However. Other steel grades upon request. 8 . parallel internal according to ISO 228/1 - female threads. All products with the design pressure in the tables are calculated according to EN 13480-3.Threaded Fittings Threaded fittings The base is a comprehensive QS according to EN ISO 9001:2001. ISO 7/1 . ­certain items . Symbols for threads Pipe threads and their symbols Threaded Fittings Pipe threads where pressure-tight joints are made on the threads.Rc 1½” R = Taper external ISO 7/1 .Rp 1½” Rp = Parallel internal Rc = Taper internal ISO 7/1 . parallel external according to ISO 228/1 - female threads.G1½” One tolerance class only G…A = Parallel external ISO 228/1 . Calculations: EN 13480 Metallic industrial piping has been used for design pressure calculations. pumps. and hydraulics and pneumatics. chemical engineering.200° .+260 °C. Temperature area: . salt solutions and food. Temperature area: ca . aliphatic and aromatic hydrocarbons and various heavy inflammable fluids (exception: Acetone). vacuum pumps. Main applications: General engineering. Temperature area: . Resistant to oils. food and medical industry. Nitril: Resistant to mineral and vegetable oils and fats.+205 °C. Threaded Fittings Teflon (PTFE): Universal chemical resistance in high and low temperatures. Only for low mechanical stress. PTFE is only attacked by liquid alkalic metals as well as by some fluorine compounds at elevated temperatures and pressures. alkalics. chlorinated solvents.+100 °C. alcohols.40° . Main applications: Chemical equipment. high temperature hydraulics and pneumatics.Threaded Fittings Gaskets in our Unions O-ring and flat sealing Viton: High temperature resistance combined with greater chemical resistance than nitril.30° . 9 . glycols. water. Main applications: In high and low temperature environments. gases. Threaded Fittings Threaded Fittings Couplings OT 1310 inside/inside conical sealing Couplings OT 1311 weld/weld conical sealing Couplings OT 1312 outside/inside conical sealing PAGE 15 PAGE 15 PAGE 16 Couplings OT 1313 inside/inside flat gasket PTFE Couplings OT 1314 outside/inside flat gasket PTFE Couplings OT 1315 weld/weld flat gasket PTFE PAGE 16 PAGE 16 PAGE 17 Couplings OT 1316 inside/inside O-ring Couplings OT 1317 outside/inside O-ring Union-L OT 3330 weld/weld O-ring PAGE 17 PAGE 17 PAGE 18 Bite-ring couplings OT 1321 Bite-ring couplings OT 1323 Bite-ring couplings OT 1322 PAGE 19 PAGE 19 PAGE 20 10 . Threaded Fittings Bite-ring couplings OT 1325 Bite-ring couplings OT 1326 PAGE 21 PAGE 21 PAGE 21 Sockets OT 2010 Reducing sockets OT 2020 Half sockets OT 2030 PAGE 22 PAGE 22 PAGE 23 Long sockets OT 4020 Welding sockets OT 4040 Welding sockets one side threaded OT 4080 PAGE 23 PAGE 24 PAGE 24 Nipples OT 2060 Hexagonal nipples OT 2070 Welding nipples OT 2080 PAGE 25 PAGE 25 PAGE 26 Threaded Fittings Bite-ring couplings OT 1324 11 . Threaded Fittings Threaded Fittings Reducing nipples OT 2090 Barrel nipples OT 2100 Bushings OT 2110 PAGE 27 PAGE 27 PAGE 28 Reducing socket .nipples OT 2120 Long screws OT 2280 Plugs OT 2350 PAGE 29 PAGE 29 PAGE 30 Plugs OT 2360 Plugs OT 2370 Plugs OT 2380 PAGE 30 PAGE 30 PAGE 31 Hexagonal caps OT 2310 Round caps OT 2320 Round nuts OT 2160 PAGE 31 PAGE 32 PAGE 32 12 . Threaded Fittings Claw couplings OT 1400 Hose nipples OT 1410 PAGE 33 PAGE 33 PAGE 33 Hose nipples OT 1420 Hose nipples OT 1430 Hose nipples OT 1440 PAGE 34 PAGE 34 PAGE 34 Double hose nipples OT 1460 Tees OT 2210 Elbows OT 2220 PAGE 35 PAGE 35 PAGE 35 Bends 45° OT 2250 Bends 90° OT 2260 Couplings socket welding OT 1318 PAGE 36 PAGE 36 PAGE 37 Threaded Fittings Hexagonal nuts OT 2170 13 . Threaded Fittings Sockets socket welding OT 2011 Nipples socket welding OT 2082 Tees socket welding OT 2211 PAGE 37 PAGE 38 PAGE 38 Elbows socket welding OT 2221 PAGE 39 Threaded Fittings 14 . 0 30.0 71.7 14.0 2.0 25.4 6.7 34.21 1.0 71.0 15.0 26. Conical sealing For more information and pressure tables.11 0. Conical sealing DN Dim.0 3.0 89.0 10.4404 10.0 44.0 26.86 1.4 6.4 6.0 18.0 2.0 58.0 24 30 38 43 50 60 67 73 87 110 128 Design pressure Weight Mpa kg/pce 10.0 10.0 35.0 42.7 2.62 Dim.18 0.0 10.0 Article code BSP-threaded EN 1.21 1.0 16.4 6.0 42.69 0.0 2.2 34.0 2.18 0.7 38 40 40 44 44 47 53 53 57 57 57 63 63 69 74 80 83 2.3 25.0 89.4404 11-1131-01 11-1131-02 11-1131-03 11-1131-04 11-1131-05 11-1131-06 11-1131-07 11-1131-08 11-1131-09 11-1131-10 11-1131-11 11-1131-51 11-1131-52 11-1131-53 11-1131-54 11-1131-55 11-1131-56 11-1131-57 11-1131-58 11-1131-59 _ _ Design pressure Mpa Weight kg/pce Article code EN 1.4/36.26 1.0 102.2 2.Threaded Fittings OT 1310 Couplings.0/71.0 29.0 3.0 38.0 10.5 2.56 0.4 44.5/40. L 6 8 10 15 20 25 32 40 50 65 80 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 32 38 41 46 50 56 62 64 67 70 75 L1 ISO 228/1 12 12 14 17 20 23 25 26 28 29 31 L2 ISO 228/1 D D1 NW 10.0 48.06 0.0/34.0 2.0 2.0 28.0 21. Inside/Inside.0 60. Weld/Weld.7/27.0 3.3 2.4 6.0 52.0 10.0 44.7 2. see www.23 0.3 51.3/55.0 10.5 3.0 10.3 77.0 20.0 33.0 89.0/20.0 29.35 0.0 102.0 18.5 2.7 34.4 44.0 38.0 54.0 2.3 77.com/ostp 15 .91 2.0 24.3 25.0 10.59 0.73 0.65 0.2 2.0 51.4 6.06 0. L T T1 D D1 NW 14.5 24.0 38.5 26.4 6.5 88.0 24 38 38 43 43 50 60 60 60 68 68 74 74 88 88 110 128 Threaded Fittings OT 1311 Couplings.9 30.0 10.0 13.0 18.0/30.0 2.5 48.0 25.0 30.4 6.0 10.0 26.0 54.0/14.51 0.4 6.0 35.0/10.0 18.3 2.7 3.0 10.0 6.0 14.0 4.5 88.4 6.27 0.3/16.85 11-7131-01 11-7131-02 11-7131-03 11-7131-04 11-7131-05 11-7131-06 11-7131-07 11-7131-08 11-7131-09 11-7131-10 11-7131-11 11-7131-12 11-7131-13 11-7131-14 11-7131-15 11-7131-16 11-7131-17 0.0/50.7 2.0 21.0/25.0 2.0 21.0 52.0 2.87 0.0 60.0 58.3 51.0 3.84 2.0 6.4 4.0 44.4 0.24 0.18 0.0 54.0 60.0/47.5 3.0 77.0 22.7 3.0 14.0 15.3 2.4404 Article code NPT-threaded EN 1.0 33.9/23.3 2.86 1.7 2.5 48.9 30.0 33.48 0.34 0.0 42.0 2.0 2.outokumpu.0 10.0/81.3/43.0 20.7 2.5 24. 0 11.26 11-5131-05 1” 69 20 20 38.13 11-3131-04 20 3/4” 47 17 17 31.58 11-3131-08 2” 72 27 2 1/2” 80 31 80 3” 80 31 L 50 65 2 32 40 27 66.4 1. Flat gasket PTFE L1 ISO 228/1 6 1/8” 32 12 8 1/4” 32 12 10 3/8” 38 14 15 1/2” 41 16 L2 ISO 228/1 D D1 NW R-131.0 74 6.07 11-2131-01 11-2131-51 1/4” 47.4 0.0 0.0 38 10.0 30.67 11-2131-06 11-2131-56 32 1 1/4” 81.0 3.0 110 4.4 0.4404 Article code NPT-threaded EN 1.0 18 28.0 0.0 38.0 65.11 11-5131-03 17 16 24.5 49.08 11-3131-09 31 98.0 17.0 88 6.0 0.0 76.09 11-2131-08 11-2131-58 2” 87.2 003-11-06 DN Dim.0 0.90 11-2131-07 11-2131-57 40 1 1/2” 84.0 128 4.4404 12 17.0 102. Inside/Inside.0 27 10. L Design pressure Weight Article code Mpa kg/pce EN 1.0 43 10.0 65.0 22 25.12 11-2131-02 11-2131-52 10 3/8” 53.0 24 10.4404 17.SLDDRW DN Dim. Outside/Inside.0 19.5 24.0 24 10.0 38.0 128 4.43 11-3131-07 1 1/2” 63 23 23 54.29 11-2131-04 11-2131-54 20 3/4” 66.SLDDRW Rev.0 5.4404 1/8” 40.0 71..92 11-5131-02 14 20.0 20 22.5 7.08 11-3131-01 12 17.0 68 6.4 0.0 54.40 11-3131-10 31 98.57 11-5131-10 80 3” 101 30 31 98.0 50 10.0 50 10.0 50 10.outokumpu.5 60 10.0 98.09 11-3131-03 16 24. Flat gasket PTFE L2 ISO 228/1 D d NW Article code BSP-threaded EN 1.0 98.73 11-5131-08 50 2” 87 23 27 66.0 60 6.0 31.0 0.0 110 4. Outside/Inside.5 30 10.0 25 28.17 11-5131-04 63 18 17 31.4 1.0 19.0 0.5 30 10.07 11-3131-02 14 20.5 11.5 66.0 0.39 11-5131-06 32 1 1/4” 74 21 22 47.0 14 14.0 20.0 52.4 1.0 75.1 6 8 24.5 14.0 68 6.4 1.5 30 10.0 88.21 11-3131-05 25 1” 53 20 20 38.5 36 10. L L1 ISO 7/1 6 1/8” 42 12 8 1/4” 42 12 10 3/8” 49 14 15 1/2” 56 20 3/4” 25 003-10-30 R-131 U.5 49.0 27 10.0 2. see www.0 2.42 11-2131-11 _ 2 50 65 L OT 1313 Couplings.0 0.30 11-5131-09 65 2 1/2” 101 30 31 98.0 73 6.2 R Threaded Fittings OT 1312 Couplings.0 23 26.com/ostp 16 Design pressure Weight Mpa kg/pce .0 60 10.20 11-2131-03 11-2131-53 29.0 0.5 58.0 38.0 24.5 9 10.0 33 30.0 12 13.0 38 10.0 125 4.0 0.0 0.SLDDR W Threaded Fittings OT 1314 Couplings.42 11-2131-05 11-2131-55 25 1” 74.30 11-3131-06 1 1/4” 58 22 22 47.5 43 10.0 2.0 14.0 128 4.0 7.0 0.0 15.0 87 6.4 0. Conical sealing L1 ISO 7/1 L2 ISO 228/1 D d NW -131U.0 3.0 44.0 0.0 21 24.0 17.0 67 6.0 3.0 0.0 0.91 11-5131-11 2 12 For more information and pressure tables. L Design pressure Weight Mpa kg/pce Article code BSP-threaded EN 1.0 5.53 11-2131-09 11-2131-59 2 1/2” 97.0 0.0 17 16.32 11-2131-10 _ 80 3” 109.0 0.0 Rev.0 0.45 11-3131-11 DN Dim.0 31.59 11-5131-07 40 1 1/2” 80 22 23 54.5 20.0 35.4 0.0 15 1/2” 62.0 24.0 43 10.09 11-5131-01 12 17.5 88 6.0 47. 0 10.0 16.5 24.3 25.0 33.0 26.4 6.0 10.0 33.0 66.0 10.3 2.4 6.5 31.0 21.0 66.30 0.0 2.13 0.4404 10.4 6.0 54.3 2.43 0.57 0.0 52.0 10.4 6.0 52.0 38.0 6.0 48.7 14.0 10.3 51.SLDDRW Dim.0 23.7 2.0 18.0 20.4 0.0 54. Outside/Inside.0 42.2 2.1 2 14/10 18/14 21.22 0.21 0.7 2.0 10.0 10.4 44.com/ostp 17 .0 27 30 36 43 50 60 68 88 Design pressure Weight Article code Mpa kg/pce EN 1.0 54.0 63.5/40 48.7 34.4 44. Inside/Inside.5 22.0 Rev.50 0.0 10.7 2.09 0.3/43 51/47 54/50 60.62 0.4 6.5 2.3/55 R-131S.0 10.9 30.7 34.3 2.08 11-4131-02 11-4131-03 11-4131-04 11-4131-05 11-4131-06 11-4131-07 11-4131-08 11-4131-09 Threaded Fittings 32 38 41 47 53 58 63 72 2 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” L2 ISO 228/1 D D1 NW L 8 10 15 20 25 32 40 50 L1 ISO 228/1 Rev.0 60.0 10. Weld/Weld.0 2.2 34/30 38/34 42.3 25.7 2.0 37.0 47.22 0.07 0.0 19.5 30.4 6.0 2. L OT 1317 Couplings.38 0.3 51.5 2.0 66.5 3.0 14.5 7.5 24.0 54.08 0. O-ring 12.32 0.08 0.SLDDR W DN Dim.0 27.0 3.0 69.47 1.0 12.0 58.0 63.0 47.0 38.4 6.0 2.5 11.0 54.0 2.2 2.29 11-6131-02 11-6131-03 11-6131-04 11-6131-05 11-6131-06 11-6131-07 11-6131-08 11-6131-09 For more information and pressure tables.35 0.SLDDRW 00310-30 DN Dim.0 10.0 2.3 L 32.0 20.0 49.08 Article code EN 1.0 20.0 38.0 58.outokumpu.4 6.0 26.4/36 44.0 10.0 6.52 0.5 27 30 36 43 50 60 68 88 Design pressure Weight Article code Mpa kg/pce EN 1. see www.0 23.0 14.42 0.0 10.72 1.15 0.0 18.3 2.0 17.7/27.0 47.0 60.5 2.17 0.0 6.0 17.0 48.5 48.0 14.10 0. L 12 14 16 17 20 23 23 27 17.0 38.5 48. L T T1 D D1 NW 14.0 16.4404 11-8131-01 11-8131-02 11-8131-03 11-8131-04 11-8131-05 11-8131-06 11-8131-08 11-8131-07 11-8131-09 11-8131-10 11-8131-11 11-8131-12 11-8131-13 11-8131-14 11-8131-15 003-10-30 OT 1316 Couplings.07 0.9 30.0 21.5 19.0 58.4 6.29 0.4404 10.0 10.5 24.0 10.0 42.4 0.0 2.5 31.24 0.5 22.0 2.0 38.L Threaded Fittings OT 1315 Couplings.0 27.0 3.0 38.0 10.0 2.0 2.3/16 25/20 26.0 2.7 2.0 63.0 17.5 48.26 0. Flat gasket PTFE 2.3 27 30 36 43 43 43 50 50 60 60 60 68 68 68 88 Design pressure Mpa Weight kg/pce 10.0 2.0 24.4 6.9/23 30/25 33.0 40.4 0. 2 R-131O . O-ring 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 42 49 56 63 69 74 80 87 12 14 17 18 20 21 22 23 L2 ISO 228/1 D d NW 2 8 10 15 20 25 32 40 50 L1 ISO 7/1 R-131 UO.5 31.57 1.5 17. 3 80.3 30.3 26.0 160.0 22.0 170.0 x 2.85 1.3 x 4.0 133.0 88.0 10.0 100.0 x 4.0 220.60 1.0 125.0 114.0 2.0 x 2.6 129.0 4.0 134.0 81.7 x 2.0 10.0 255.0 x 2.0 205.3 154.9 48.4 x 2.52 0.0 159.0 160.5 37.0 4.0 x 4.10 1.0 141.0 34.0 109.5 x 2.24 0. Weld/Weld.0 51.0 4.1 84.6 54.3 129.0 205.0 x 4.0 x 2. see www.6 0.0 58.com/ostp 18 10.outokumpu.90 11.7 x 3.0 x 2.5 150.1 125.00 3.1 x 3.19 0.0 10.7 43.0 49.1 Design pressure Weight Mpa kg/pce Article code Teflon EN 1.0 x 2.3 76.35 0.4404 Article code Nitril EN 1.0 54.0 x 2.0 89.0 10.0 28.50 2.40 2.0 114.5 40 40 50 50 50 60 60 60 60 60 60 60 60 60 70 70 70 70 70 70 70 70 80 80 26.10 7.37 0.4 46.6 44.2 54.Threaded Fittings OT 3330 Union-L.6 154.9 84.70 2.0 4.1 50.0 4.5 2.66 0.2 38.0 108.5 219.4404 14-504-310 14-504-320 14-504-330 14-504-340 14-504-350 14-504-360 14-504-370 14-504-380 14-504-390 14-504-400 14-504-410 14-504-420 14-504-430 14-504-440 14-504-450 14-504-460 14-504-470 14-504-480 14-504-490 14-504-500 14-504-510 14-504-520 14-504-530 14-504-540 14-503-310 14-503-320 14-503-330 14-503-340 14-503-350 14-503-360 14-503-370 14-503-380 14-503-390 14-503-400 14-503-410 14-503-420 14-503-430 14-503-440 14-503-450 14-503-460 14-503-470 14-503-480 14-503-490 14-503-500 14-503-510 14-503-520 14-503-530 14-503-540 .0 211.6 255.0 60.0 10.9 31.9 x 3.3 x 3.1 x 2.0 104.7 100.3 x 2.10 1.0 107.30 2.0 132.5 2.5 1.00 1.0 x 2.5 70.0 57.6 104. mm L D d 26.9 60.9 x 2.0 4.60 3.2 42.0 10.0 x 2.0 139.70 7.6 1. O-ring Dim.5 168.0 10.63 0.6 42.20 0.0 4.20 3.0 Threaded Fittings For more information and pressure tables.0 10.5 2.9 76.6 1.9 250.0 4.0 33.3 x 2.3 200.0 150. 5 45.09 0.Threaded Fittings OT 1321 Bite-ring couplings Dim.0 14 17 19 19 22 27 27 27 32 32 32 36 36 36 38 Design pressure Mpa Weight kg/pce Article code EN 1.2 21.0 12.4 18.0 11.3 23 25 6.2 12 14 15 16 17 17.2 14.0 12.1 10.2 15.5 10.21 0.2 16.07 0.20 0.0 11.2 14.com/ostp 19 .21 0.2 25.4408 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.3 23 25 39 40 42 42 43 46 46 46 51 51 54 55 55 55 63 10.28 0.5 13.2 17.0 12.0 11.2 5 6 8 8 10 12 12 12 15 15 15 18 19 19 22 14 17 19 19 22 27 27 27 32 32 32 36 36 36 38 Design pressure Mpa 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Weight kg/pce 0.09 0. see www.2 18 20 21.0 12.0 13. L L1 L2 d d1 NW 6 8 10 10.0 11.28 0.4 18.1 8.55 11-1323-02 11-1323-03 11-1323-04 11-1323-05 11-1323-06 11-1323-07 11-1323-08 11-1323-09 11-1323-10 11-1323-11 11-1323-12 11-1323-13 11-1323-14 11-1323-15 11-1323-16 Threaded Fittings OT 1323 Bite-ring couplings For more information and pressure tables.21 0.2 17.44 0.07 0.0 27.0 11.outokumpu.44 0.21 0.5 51.8 14.2 20.0 12.2 18 20 21.2 10.5 51.2 16.0 42.32 0.09 0.0 11.3 14.0 12.5 42.06 0. d d1 H L1 L NW 6 8 10 10.33 0.32 0.1 10.15 0.3 14.30 Article code EN 1.5 51.4 12.1 8.5 30.0 12.0 13.3 15.2 21.2 12 14 15 16 17 17.05 0.8 14.0 11.4404 11-1321-02 11-1321-03 11-1321-04 11-1321-05 11-1321-06 11-1321-07 11-1321-08 11-1321-09 11-1321-10 11-1321-11 11-1321-12 11-1321-13 11-1321-14 11-1321-15 11-1321-16 Dim.26 0.5 23.0 11.0 42.5 23.0 28.15 0.2 25.2 17.2 17.5 13.5 56.5 10.2 20.04 0.0 24 25 27 27 28 30 30 30 31 31 31 35 35 35 36 6.21 0.0 45.5 33.4 12.14 0.2 10.5 30.06 0.2 5 6 8 8 10 12 12 12 15 15 15 18 19 19 22 20 21 22 22 24 30 30 30 32 32 32 35 35 35 38 10.0 12.44 0.0 12.11 0.5 45.0 12. 0 10.5 15.18 0.05 0.2 18.12 0.0 35.4 17.1 8.5 11.0 33.0 14.0 39.16 0.12 0.15 0.2 17.0 11.2 15.2 15.5 27.5 29.5 13.04 0.1 10.5 13.3 12.5 11.outokumpu.2 x 3/4” 18 x 1/2” 18 x 3/8” 20 x 1/2” 20 x 3/4” 21. see www.0 37.08 0.5 13.5 11.0 35.0 12.5 33.0 11.2 10.5 15.0 11.0 12.20 0.0 37.5 23.0 39.2 20.19 0.0 10.2 x 1/4” 10.5 10.5 35.4404 11-1322-03 11-1322-04 11-1322-05 11-1322-31 11-1322-06 11-1322-32 11-1322-07 11-1322-08 11-1322-09 11-1322-10 11-1322-11 11-1322-12 11-1322-13 11-1322-14 11-1322-15 11-1322-16 11-1322-34 11-1322-17 11-1322-18 11-1322-19 11-1322-20 11-1322-21 11-1322-22 11-1322-30 11-1322-33 11-1322-23 11-1322-24 11-1322-25 11-1322-26 .5 27.5 13.2 17.5 15.1 6.0 12.2 14 14 14 14 17 17 19 19 19 19 22 22 22 27 27 27 27 32 32 32 32 32 32 32 36 36 36 36 38 Design pressure Mpa Weight kg/pce 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.5 15.4 18.5 11.5 15.0 11.2 21.5 13.19 0.5 13.0 33.5 11.06 0.1 6.0 5 5 5 5 6 6 6 7 8 7 8 7 10 5 10 12 19 10 12 12 12 14 15 15 19 14 15 10 15 Threaded Fittings For more information and pressure tables.2 20.1 6.0 35.8 10.5 11.5 13.18 0.2 12.2 16.5 15.0 30.5 7.5 11.0 30.15 0.0 11.12 0.5 11.0 13.2 14.0 31.5 11.04 0.08 0.5 33.2 12.0 39.5 11.5 13.0 39.5 11.1 8.2 17.09 0.5 23.0 35.5 10.05 0.0 37.2 10.21 Article code EN 1.com/ostp 20 6.0 12.5 13.3 x 3/4” 23 x 3/4” 25 x 3/4” 31 35 35 37 37 38 38 38 38 38 39 40 41 44 42 44 45 44 45 47 45 47 45 43 47 49 49 49 49 10.2 15.07 0.5 31.5 11.13 0.06 0.0 12.Threaded Fittings OT 1322 Bite-ring couplings L2 Dim.0 12. L L1 ISO 7/1 L3 d d1 NW 6 x 1/8” 6 x 1/4” 6 x 3/8” 6 x 1/2” 8 x 1/4” 8 x 3/8” 10 x 1/4” 10 x 3/8” 10.04 0.0 37.0 30.15 0.0 30.5 11.0 29.5 15.0 14.2 x 1/2” 17.5 25.2 x 3/8” 12 x 1/4” 12 x 3/8” 12 x 1/2” 14 x 1/2” 15 x 3/8” 15 x 1/2” 15 x 3/4” 16 x 1/2” 17 x 1/2” 17 x 3/4” 17.2 12.5 13.0 12.8 13.15 0.0 12.2 10.06 0.05 0.0 11.17 0.0 11.5 11.0 35. 09 11-1325-07 12 x 1/2” 41.5 32.5 14.0 22 10 0.10 11-1326-07 12 x 1/2” 48 11.0 17 10 0.3 12 27 10 0.2 82 12.0 12.2 8 27.0 27.0 41 64 17.53 11-1324-13 21.0 9 10.3 90 14.0 10.0 22 10 0.5 11.10 11-1325-08 14 x 1/2” 47.0 22 10 0.0 14.0 9 10.4 22 38 10 0.0 6.1 5 24.4 8 19 10 0.0 6.04 11-1325-01 6 x 1/4” 31. L L1 ISO 7/1 d d1 H NW Design pressure Mpa Weight kg/pce Article code EN 1.0 27.4 15 32 10 0.1 6 26.0 9 14.0 45 70 21.09 11-1326-06 12 x 3/8” 48 11.09 11-1324-03 10 60 11.11 11-1326-08 For more information and pressure tables.05 11-1325-03 8 x 3/8” 34.0 27 10 0.07 11-1325-05 12 x 1/4” 41.5 10.5 27 40 6.3 8 27.0 14 10 0.5 10.5 19 10 0. L L1 H L2 d d1 NW Design pressure Mpa Weight kg/pce Article code EN 1.09 11-1325-06 12 x 3/8” 41.2 60 11.3 10 32.3 5 14 10 0.5 19 10 0.0 30 44 10.3 8 32.0 37 60 16.7 19 36 10 0.22 11-1324-07 15 74 12.5 14.39 11-1324-12 20 90 13.12 11-1324-05 12 64 11.0 9 12.0 41 64 17.05 11-1326-01 6 x 1/4” 40 10.50 11-1324-15 25 96 14.0 30.5 28. see www.5 11.5 41 64 18.2 10 32.0 14 10 0.0 12.0 12.0 12.5 10.4408 6 x 1/8” 31.0 9 14.5 19 10 0.5 32.1 5 24.07 11-1326-03 10 x 1/4” 44 11.0 14 10 0.5 19 10 0.4 19 36 10 0.3 45 70 23.5 9 8.0 17.0 22 10 0.0 17.0 9 12.2 8 32.3 8 25.0 17 10 0.12 11-1324-04 10.5 11.3 10 22 10 0.0 30 44 10.0 17.Threaded Fittings OT 1324 Bite-ring couplings Dim.4 15 32 10 0.0 22 10 0.0 37 60 14.5 11.20 11-1325-09 Threaded Fittings L3 Dim.4 15 32 10 0.5 10.2 10 32.0 29 42 8.5 32.07 11-1325-04 10 x 3/8” 36.47 11-1324-16 OT 1325 Bite-ring couplings Design pressure Weight Mpa kg/pce Article code EN 1.2 5 24.0 14.5 11.0 8.outokumpu.0 36.08 11-1325-10 10 x 1/4” 36.0 10.0 30.0 32 48 12.3 10 32.com/ostp 21 .3 12 35.4 8 19 10 0.3 8 27.3 12 27 10 0.3 12 27 10 0.27 11-1324-08 16 74 12.0 12 16.0 37 60 15.26 11-1324-09 17 82 12.0 14.0 30.8 45 70 20.4 18 36 10 0.06 11-1324-02 8 58 10.0 48 76 25.1 6 26.5 19 10 0.07 11-1326-02 8 x 1/4” 42 10.41 11-1324-11 18 82 11.13 11-1324-06 14 74 12.04 11-1325-02 8 x 1/4” 33.0 12 14.0 14 10 0.0 22 10 0.08 11-1326-05 12 x 1/4” 48 11.4408 6 x 1/8” 40 10.51 11-1324-14 23 90 13.5 6 8.3 6 17 10 0.2 5 24. L L1 L2 ISO 7/1 d d1 H NW OT 1326 Bite-ring couplings L2 Dim.4408 6 54 10.41 11-1324-10 17.08 11-1326-04 10 x 3/8” 44 11.2 8 27. 0 0.14 0.5 27.02 0.0 19.5 49. L ISO 228-1 D D1 Threaded Fittings 8x6 10 x 8 15 x 8 15 x 10 20 x 10 20 x 15 25 x 15 25 x 20 32 x 15 32 x 20 32 x 25 40 x 20 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 50 80 x 50 80 x 65 1/4”x 1/8” 3/8”x 1/4” 1/2”x 1/4” 1/2”x 3/8” 3/4”x 3/8” 3/4”x 1/2” 1”x 1/2” 1”x 3/4” 1 1/4”x 1/2” 1 1/4”x 3/4” 1 1/4”x 1” 1 1/2”x 3/4” 1 1/2”x 1” 1 1/2”x 1 1/4” 2”x 1” 2”x 1 1/4” 2”x 1 1/2” 2 1/2”x 2” 3”x 2” 3”x 2 1/2” 27 30 36 36 39 39 45 45 52 50 50 55 55 55 65 65 65 74 78 80 12 12 16 16 17 17 20 20 22 22 22 22 22 22 27 27 27 32 35 35 18.0 10.3 54.0 4.0 95.5 39.0 10.4 6.7 54.0 10.0 28.0 23.5 69.04 0.4 6.0 4.0 125.5 84.0 19.5 39.0 17 25 26 34 36 43 48 48 56 65 71 85 Design pressure Weight Mpa kg/pce 10.com/ostp 22 Design pressure Weight Mpa kg/pce 10.4 27.4 6.03 0.0 10.0 10.4 6.8 40.81 1.4 6.58 0.0 10.4404 Article code NPT-threaded EN 1.08 0.outokumpu.5 39.7 54.5 26.5 21.5 99.40 0.0 99.5 39.4404 11-0202-01 11-0202-02 11-0202-03 11-0202-04 11-0202-05 11-0202-06 11-0202-07 11-0202-08 11-0202-19 11-0202-09 11-0202-10 11-0202-11 11-0202-12 11-0202-13 11-0202-14 11-0202-15 11-0202-16 11-0202-17 11-0202-20 11-0202-18 11-0202-51 11-0202-52 11-0202-53 11-0202-54 11-0202-55 11-0202-56 11-0202-57 11-0202-58 11-0202-59 11-0202-60 11-0202-61 11-0202-62 11-0202-63 11-0202-64 11-0202-65 11-0202-66 - .0 28.5 55.68 0.29 0.80 Article code BSP-threaded EN 1.4 6.4 6.0 0.07 0.25 Article code BSP-threaded EN 1.5 69.Threaded Fittings OT 2010 Sockets L DN Dim. D ISO 228/1 6 8 10 15 20 25 32 40 50 65 80 100 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 14.5 14.11 0.0 6.5 69.31 0.53 0.0 10.0 10.0 32.0 10.3 82.0 6.97 1.8 21.0 48.10 1.03 0.0 4.4404 Article code NPT-threaded EN 1.27 0.31 0.35 0.27 0.4 4.4 4.5 69.04 0.5 39.52 0.5 84.18 0.5 49.5 54.08 0.5 49.5 49.0 4.10 0.4 6.21 0.5 32.4 6.5 31.0 10.0 10.5 28.0 For more information and pressure tables.5 49.15 0.5 32.09 0.5 66.24 0.0 32.0 10.7 69.0 23.0 18.5 32. see www.4 6.4404 11-0201-01 11-0201-02 11-0201-03 11-0201-04 11-0201-05 11-0201-06 11-0201-07 11-0201-08 11-0201-09 11-0201-10 11-0201-11 11-0201-12 11-0201-51 11-0201-52 11-0201-53 11-0201-54 11-0201-55 11-0201-56 11-0201-57 11-0201-58 11-0201-59 - OT 2020 Reducing sockets L1 DN Dim. 3 26.6 55.0 30.03 0. see www.0 10.6 32.0 14.08 0.8 39.10 0.0 4.02 0.5 22.21 0.13 0.03 0.3 48.6 66.3 54.8 39.06 0.0 26.13 0.18 0.06 0.4 6.0 10.30 0.29 0.45 11-0203-01 11-0203-02 11-0203-03 11-0203-04 11-0203-05 11-0203-06 11-0203-07 11-0203-08 11-0203-09 11-0203-10 11-0203-11 OT 4020 Long sockets No stock standard 8 1/4” 10 3/8” 15 1/2” 20 3/4” 25 1” 32 1 1/4” 40 1 1/2” 50 2” 2 1/8” -402.01 0.5 21.com/ostp 23 .0 15.outokumpu.30 0.Threaded Fittings OT 2030 Half sockets L DN Dim.0 48.3 26.07 0.3 48.1 6 8 10 15 20 25 32 40 50 65 80 10.07 0.13 0.5 26.33 0.47 0.3 26.58 Article code BSP-threaded EN 1.20 0.0 6.5 21.0 10.0 18.01 0.0 95.6 32.04 0.8 39.6 32.5 66.04 0.6 39.8 48.0 10.19 0.5 40.0 18.5 18.25 0.03 0.5 32.5 21.27 0.09 0.8 39.4 6. ISO 228/1 D R 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” Rev.18 0.4 4. D ISO 228/1 kg/pce Note! Minimum quantity offer on request For more information and pressure tables.0 14.3 26.0 10.SLDDRW 6 003-10-29 14.15 0.42 0.18 0.3 32.5 21.24 0.37 0.0 Design pressure Mpa Weight kg/pce Article code EN 1.5 34.15 0.5 26.3 55.06 0.12 0.33 0.09 0.3 82.6 32.5 21.6 55.5 21.4404 19-0402-01 19-0402-21 19-0402-51 19-0402-02 19-0402-52 19-0402-23 19-0402-03 19-0402-53 19-0402-33 19-0402-63 19-0402-24 19-0402-54 19-0402-04 19-0402-34 19-0402-64 19-0402-44 19-0402-55 19-0402-25 19-0402-35 19-0402-05 19-0402-65 19-0402-45 19-0402-56 19-0402-36 19-0402-66 19-0402-06 19-0402-46 19-0402-37 19-0402-67 19-0402-07 19-0402-38 19-0402-68 19-0402-08 19-0402-49 Threaded Fittings L Weight DN Dim.3 26.0 17.0 19.0 0.0 10.3 34 50 60 50 60 50 52 60 70 80 50 60 68 70 80 96 60 50 70 72 80 96 60 70 80 86 96 70 80 96 70 80 96 96 0.12 0.36 0.4404 10.10 0.0 22.6 32.0 12.0 14. com/ostp 24 11 11 11 12 12 12 12 15 15 15 15 15 15 17 17 17 17 17 17 20 20 20 20 20 22 22 22 22 26 26 31 34 0.0 80.0 Note! Minimum quantity offer on request For more information and pressure tables.5 2 8 10 15 20 25 32 40 50 -404.8 39.3 Weight kg/pce Article code EN 1.0 120.15 0.5 21.32 0.0 16.0 95.0 25.35 0.17 0.25 0.9 33.43 0.3 60. L 5 5 6 6 6 6 8 8 18.6 32.0 120.3 26.5 20.0 115.outokumpu.6 32.0 55.0 120.4 48.0 110.0 100.0 115.0 2.SLDDRW DN Dim.03 0.0 80.16 0.0 200.0 100.6 55.02 0.66 0.6 32.09 0.6 Note! Minimum quantity offer on request OT 4080 Welding sockets one side threaded No stock standard Threaded Fittings 8 1/4” 10 3/8” 15 1/2” 20 3/4” 25 1” 32 1 1/4” 40 1 1/2” 50 2” 65 80 2 1/2” 3” 18.0 120.02 0.21 0.3 66.58 0.0 100.6 32.0 120.5 21.0 120.0 120.0 17.0 48.31 0.34 0.0 120.5 18.6 66.0 2.5 26.0 200.19 19-0404-02 19-0404-03 19-0404-04 19-0404-05 19-0404-06 19-0404-07 19-0404-08 19-0404-09 2.14 0.3 26.0 100.0 150.8 39.0 150.0 200.0 13.10 1.3 26.16 0.7 42.40 Article code BSP-threaded EN 1.11 0.0 100.43 0.0 13.28 0.6 2.22 0.0 003-10-31 L1 Weight DN Dim.0 80.48 0.0 100.8 39.68 1.3 32.6 32. see www.0 100.5 21.46 0.0 32.6 2.13 0.5 18.5 22.75 0.8 39.3 26.0 80.0 150.2 21.3 48.0 65.6 2.60 0.06 0.0 2.8 48.55 0.0 100.38 0.6 39.3 26.5 21.0 80.13 0.24 0.78 0.17 0.3 82.3 26.0 120.4404 19-0408-02 19-0408-22 19-0408-72 19-0408-03 19-0408-33 19-0408-43 19-0408-73 19-0408-04 19-0408-24 19-0408-44 19-0408-54 19-0408-64 19-0408-74 19-0408-05 19-0408-35 19-0408-45 19-0408-55 19-0408-65 19-0408-75 19-0408-06 19-0408-26 19-0408-46 19-0408-56 19-0408-76 19-0408-07 19-0408-27 19-0408-08 19-0408-28 19-0408-09 19-0408-29 19-0408-10 19-0408-11 .4404 0.82 0.0 22.3 55.58 0.0 21.0 2.5 17. D L ISO 228/1 kg/pce 110.R Threaded Fittings OT 4040 Welding sockets No stock standard 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 21 23 27 28 31 34 36 40 L1 ISO 228-1 L2 D D1 T 12.0 39.5 26. 0 16.9 53.0 21.5 5.7 27.5 7.0 10.5 15.4 6.5 15.63 0.9 Design pressure Mpa Weight kg/pce Article code EN 1.0 41.5 85.2 8.4 4.0 10.4 6.03 0.0 65.4 6.6 16.0 10.5 34.5 19.8 30.13 0.0 0.21 0.5 19.08 0.com/ostp 25 .5 34.SLDDRW L1 L2 DN Dim.8 30.05 0.0 10. see www.SLDDRW Rev.5 76.4404 11-0207-51 11-0207-52 11-0207-53 11-0207-54 11-0207-55 11-0207-56 11-0207-57 11-0207-58 11-0207-59 - 003-10-25 Threaded Fittings 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 2 6 8 10 15 20 25 32 40 50 65 80 100 003-11-06 -207.0 10.0 11.5 25.26 0.3 36.3 33.5 32.02 0.0 4.1 68.0 29. ISO 228/1 d 16 18 22 25 30 35 38 38 45 55 60 6.01 0.02 0.0 4. L ISO 7/1 ISO 7/1 d NW For more information and pressure tables.0 6.0 100.02 Article code BSP-threaded EN 1.0 16.5 25.0 28.0 36.0 38.03 0.5 11.5 10.0 4.0 10.0 0.0 24.02 0.06 0.4 4.09 0.0 19.43 0.5 11.0 11.outokumpu.0 46.07 0.0 76.4 6.0 54.9 12.01 0.5 21.0 10.0 50.24 0.0 21.14 0.01 0.0 94.0 12 14 19 22 30 36 46 50 65 80 90 126 Design pressure Weight Mpa kg/pce 10.5 21.0 65.0 10.4404 10.0 14.30 11-0206-01 11-0206-02 11-0206-03 11-0206-04 11-0206-05 11-0206-06 11-0206-07 11-0206-08 11-0206-09 11-0206-10 11-0206-11 OT 2070 Hexagonal nipples 21.9 80.5 54.0 7.0 6.1 21.0 7.1 L DN Dim.83 2.0 10.0 10.R Threaded Fittings OT 2060 Nipples 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 2 R 6 8 10 15 20 25 32 40 50 65 80 -206.3 33.0 41.4404 11-0207-01 11-0207-02 11-0207-03 11-0207-04 11-0207-05 11-0207-06 11-0207-07 11-0207-08 11-0207-09 11-0207-10 11-0207-11 11-0207-12 Article code NPT-threaded EN 1. 0 50.5 20.9 33.3 Rev.2 3.12 0.6 4.0 0.46 0.6 3.08 0.32 0. L D 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 30 30 35 35 35 40 2 8 10 15 20 25 32 40 50 -208 z.3 26.4571 DN Dim.21 0.0 6.3 26.15 0.2 21.08 0.0 12.5 17.14 0.2 3.0 4.0 12.0 10.0 4.0 14.outokumpu.0 24.0 41.0 35.5 6.7 42.0 14.0 14.4404 Article code NPT-threaded EN 1.02 0.5 32.5 32.2 13.3 2.3 2.03 0.2 3.0 10.0 11.0 6.5 11.0 14.2 3.06 0.0 14.9 114.02 0.0 16.3 60.03 0.4 6.1 88.6 3.Threaded Fittings OT 2071 Hexagonal nipples (parallel thread) No stock standard DN Dim.0 2.0 10.84 Article code BSP-threaded EN 1.31 Article code EN 1.5 6.0 46.4404 11-0208-01 11-0208-02 11-0208-03 11-0208-04 11-0208-05 11-0208-06 11-0208-07 11-0208-08 11-0208-09 11-0208-10 11-0208-11 11-0208-12 11-0208-51 11-0208-52 11-0208-53 11-0208-54 11-0208-55 11-0208-56 11-0208-57 11-0208-58 11-0208-59 - R Also available as stock standard in 1.4404 0.0 11.4 48.02 0.3 60.3 Note! Minimum quantity offer on request For more information and pressure tables.5 11.4 6. see www.1 6 8 10 15 20 25 32 40 50 65 80 100 6 9 9 12 13 15 17 17 22 24 27 33 Design pressure Weight Mpa kg/pce 2.0 10.01 0.2 3.6 Weight kg/pce Article code EN 1.0 4.15 19-0208-02 19-0208-03 19-0208-04 19-0208-05 19-0208-06 19-0208-07 19-0208-08 19-0208-09 .5 17. SLDDRW Threaded Fittings OT 2081 Welding nipples (parallel thread) No stock standard L1 ISO 228/1 T 13.0 10. L 8 10 15 20 25 32 40 50 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” L1 ISO 228/1 20.23 0.0 7. L D ISO 7/1 T 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 30 30 30 35 40 40 50 50 55 60 65 90 10.0 32.3 2.0 16.05 0.0 38.2 21.4 4.01 0.com/ostp 26 14 15 19 20 24 25 26 28 2.23 0.0 41.6 2.0 L2 ISO 228/1 d NW 6.0 17 22 27 32 41 50 55 65 Weight kg/pce 0.03 0.9 33.4404 19-0207-02 19-0207-03 19-0207-04 19-0207-05 19-0207-06 19-0207-07 19-0207-08 19-0207-09 Note! Minimum quantity offer on request OT 2080 Welding nipples L1 DN Dim.02 0.07 0.04 0.6 3.7 42.3 2.4 48.6 2.5 10.2 3.0 10.08 0.05 0.0 19.3 76. 4 48.5 15.4404 Article code NPT-threaded EN 1.6 3.82 1.0 15.2 3.5 11.0 63.5 16.2 13.7 42.5 33.0 14.3 33.25 0.0 62.0 31.07 0.0 49.03 0.0 5.0 14 19 19 22 22 22 30 30 30 36 36 36 36 46 46 46 50 50 50 65 65 65 80 80 90 90 50 0.0 63.13 0.0 7.5 16.6 2.26 0.4404 11-0209-01 11-0209-02 11-0209-03 11-0209-04 11-0209-05 11-0209-06 11-0209-07 11-0209-08 11-0209-09 11-0209-10 11-0209-11 11-0209-12 11-0209-13 11-0209-14 11-0209-15 11-0209-16 11-0209-17 11-0209-18 11-0209-19 11-0209-20 11-0209-21 11-0209-22 11-0209-23 11-0209-24 11-0209-25 11-0209-26 11-0209-27 11-0209-51 11-0209-52 11-0209-53 11-0209-54 11-0209-55 11-0209-56 11-0209-57 11-0209-58 11-0209-59 11-0209-60 11-0209-61 11-0209-62 11-0209-63 11-0209-64 11-0209-65 11-0209-66 11-0209-67 11-0209-68 11-0209-69 11-0209-70 11-0209-71 11-0209-72 - R 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 40 40 40 60 60 60 80 80 100 100 120 150 6 9 9 12 13 15 17 17 22 24 27 33 2 6 8 10 15 20 25 32 40 50 65 80 100 -210.5 21.0 37.0 38.0 19.3 26.5 16.0 7.0 75.8 25.5 37.0 11.0 14.0 19.3 30.76 1.0 52.0 16.0 38.30 Article code BSP-threaded EN 1.0 49.0 33.0 24.5 25.0 21.0 38.5 14.9 33.29 Article code BSP-threaded EN 1.0 11.07 0.0 19.0 11.0 11.3 2.5 11.5 25.0 40.0 2.03 0.0 78.9 114.8 30.0 63.21 0.5 10.5 52.4571 27 0 .0 11.0 19.11 0.5 15.6 4.24 0.0 10.4404 Article code NPT-threaded EN 1.0 63.0 40.0 75.5 15.5 31.42 0.0 21.SLDDRW L1 L2 DN Dim.5 5.5 Rev.3 For more information and pressure tables.5 40.0 24.0 49.0 48.04 0.1 88.0 25.0 14.0 24.0 19.4404 11-0210-01 11-0210-02 11-0210-03 11-0210-04 11-0210-05 11-0210-06 11-0210-07 11-0210-08 11-0210-09 11-0210-10 11-0210-11 11-0210-12 11-0210-51 11-0210-52 11-0210-53 11-0210-54 11-0210-55 11-0210-56 11-0210-57 11-0210-58 11-0210-59 - Threaded Fittings OT 2100 Barrel nipples Also available as stock standard in 1.0 24.8 25.0 19.0 49.93 0.05 0.5 21.5 24.08 0.0 49.5 21.5 21.2 3.0 49.0 7.0 16.0 14.5 7. L ISO 7/1 ISO 7/1 d d1 NW kg/pce 1/4”x 1/8” 3/8”x 1/8” 3/8”x 1/4” 1/2”x 1/8” 1/2”x 1/4” 1/2”x 3/8” 3/4”x 1/4” 3/4”x 3/8” 3/4”x 1/2” 1”x 1/4” 1”x 3/8” 1”x 1/2” 1”x 3/4” 1 1/4”x 1/2” 1 1/4”x 3/4” 1 1/4”x 1” 1 1/2”x 1/2” 1 1/2”x 1” 1 1/2”x 1 1/4” 2”x 1” 2”x 1 1/4” 2”x 1 1/2” 2 1/2”x 3/4” 2 1/2”x 2” 3”x 2” 3”x 2 1/2” 1 1/2”x 3/4” 25.5 19.0 14.4 4 4 4 0.5 7.5 44.0 59.0 33.0 73.0 Design pressure Weight Mpa kg/pce 10 10 10 10 10 10 6.53 0.5 21.5 11.0 7.03 0.02 0.0 45.29 0.0 19.0 15.07 0.0 21.5 10.0 19.3 2.0 30.0 14.0 19.08 0.5 21.2 21.3 60.48 0.0 7.1 8x6 10 x 6 10 x 8 15 x 6 15 x 8 15 x 10 20 x 8 20 x 10 20 x 15 25 x 8 25 x 10 25 x 15 25 x 20 32 x 15 32 x 20 32 x 25 40 x 15 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 20 65 x 50 80 x 50 80 x 65 40 x 20 11.09 0.2 3.05 0.12 0.50 0.4 6.5 31.5 19.0 38.0 19.0 19.0 16.20 0.28 0.74 0.0 49.02 0.4 6.3 16.5 10.0 7. see www.50 0.5 15.0 54.02 0.0 31.0 62.5 24.0 4.0 82.5 29. L ISO 7/1 ISO 7/1 D T 6 9 9 12 13 15 17 17 22 24 27 33 10.30 0.5 21.outokumpu.8 30.Threaded Fittings OT 2090 Reducing nipples L1 L2 Weight DN Dim.5 24.0 38.5 31.6 3.5 17.8 25.5 10.com/ostp 2.5 19.0 5.13 0.5 11.12 0.3 76.5 48.0 15. 09 0.5 16.5 27.5 32.5 24.0 11.5 32.com/ostp 28 Design pressure Weight Mpa kg/pce 10.52 0.0 10.05 0.5 003-10-27 1/4”x 1/8” 3/8”x 1/8” 3/8”x 1/4” 1/2”x 1/8” 1/2”x 1/4” 1/2”x 3/8” 3/4”x 1/4” 3/4”x 3/8” 3/4”x 1/2” 1”x 1/4” 1”x 3/8” 1”x 1/2” 1”x 3/4” 1 1/4”x 1/2” 1 1/4”x 3/4” 1 1/4”x 1” 1 1/2”x 1/2” 1 1/2”x 3/4” 1 1/2”x 1” 1 1/2”x 1 1/4” 2”x 1” 2”x 1 1/4” 2”x 1 1/2” 2 1/2”x 2” 3”x 2” 3”x 2 1/2” 2 8x6 10 x 6 10 x 8 15 x 6 15 x 8 15 x 10 20 x 8 20 x 10 20 x 15 25 x 8 25 x 10 25 x 15 25 x 20 32 x 15 32 x 20 32 x 25 40 x 15 40 x 20 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 50 80 x 50 80 x 65 -211.54 1.5 19.0 19.0 10.0 32.4 4.4 6.5 51.74 Article code BSP-threaded EN 1.5 32.03 0.5 32.4 6.36 0.0 10.0 19.26 0.0 10.outokumpu.5 21. ISO 228/1 ISO 7/1 NW 11.5 32.0 10.15 0.0 33.02 0.0 16.0 27.4 6.5 14 19 19 22 22 22 30 30 30 36 36 36 36 46 46 46 50 50 50 50 65 65 65 80 90 90 Threaded Fittings For more information and pressure tables.0 10.5 21.0 15.05 0.0 4.SLDDRW L L1 DN Dim.0 27.35 0.15 0.R Threaded Fittings OT 2110 Bushings 17.0 4.4 6.24 0.0 40.0 17.0 10.0 10.4404 11-0211-01 11-0211-02 11-0211-03 11-0211-04 11-0211-05 11-0211-06 11-0211-07 11-0211-08 11-0211-09 11-0211-10 11-0211-11 11-0211-12 11-0211-13 11-0211-26 11-0211-14 11-0211-15 11-0211-16 11-0211-17 11-0211-18 11-0211-19 11-0211-20 11-0211-21 11-0211-22 11-0211-23 11-0211-24 11-0211-25 11-0211-51 11-0211-52 11-0211-53 11-0211-54 11-0211-55 11-0211-56 11-0211-57 11-0211-58 11-0211-59 11-0211-60 11-0211-61 11-0211-62 11-0211-63 11-0211-64 11-0211-65 11-0211-66 11-0211-67 11-0211-68 11-0211-69 11-0211-70 11-0211-71 11-0211-72 - .0 10.07 0.0 10.12 0.5 32.4 6.0 51.5 21.5 21.0 10.0 21.0 30.5 15.4404 Article code NPT-threaded EN 1.02 0.0 15.5 21.12 0.4 6.40 0.5 26.4 6.5 24.0 0.0 10.5 21.5 17.0 21.4 6.0 46.5 16.0 26.0 27.68 0.0 6.0 24.5 40. see www.13 0.19 0.07 0.30 0.0 21.02 0.0 19.5 11.5 33.5 21.4 6.0 40.0 26.04 0. 6 3.0 14.0 10.5 54.0 26.0 0.58 1.0 38.0 32.0 5.26 0.22 0.0 2. L L1 L2 DN Dim.4 48.outokumpu.12 0.0 52.5 32.0 4.3 60.com/ostp 003-10-31 29 .9 2.6 2.0 20.0 32.5 22.0 30.0 40.88 0.0 25.2 3.5 38.04 0.0 50.0 50.47 0.1 88.0 29.5 69.0 6 6 9 9 9 9 12 9 12 13 9 13 15 13 15 17 15 17 17 17 17 22 22 24 L3 ISO 228/1 D d 20.5 37.0 37.03 0.5 38.5 27.5 33.5 29.3 2.0 19.5 39.5 99.0 10. L ISO 7/1 ISO 228/1 D T 75 80 100 100 120 140 150 150 170 180 200 6 9 9 12 13 15 17 17 22 24 27 2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” -228.R Threaded Fittings OT 2120 Reducing sockets .08 0.0 15.0 37.0 65.3 76.11 0.0 26.5 42.27 0.62 0.0 56.0 34.13 0.5 14.0 68.0 28.5 28.24 0.5 27.5 33.45 0.5 17.0 22.0 10.5 39.5 18.0 68.0 30.13 0.0 52.45 0.5 38.5 69.7 42.0 32.5 23.nipples No stock standard 28. see www.60 0.89 19-0212-01 19-0212-24 19-0212-02 19-0212-03 19-0212-04 19-0212-05 19-0212-06 19-0212-07 19-0212-08 19-0212-09 19-0212-10 19-0212-11 19-0212-12 19-0212-13 19-0212-14 19-0212-15 19-0212-16 19-0212-17 19-0212-18 19-0212-19 19-0212-20 19-0212-21 19-0212-22 19-0212-23 R Note! Minimum quantity offer on request 003-10-31 Rev.0 35.0 60.65 11-0228-01 11-0228-02 11-0228-03 11-0228-04 11-0228-05 11-0228-06 11-0228-07 11-0228-08 11-0228-09 11-0228-10 11-0228-11 Threaded Fittings OT 2280 Long screws For more information and pressure tables.0 19.5 17.22 0.5 84.5 19.5 21.5 69.5 33.0 14.0 32.67 0.0 24.5 49.4 4.5 5.4 6.4 6.08 0.5 34.79 1.0 17.0 28.4404 0.5 54.04 0.0 37.26 0.0 50.5 34.5 36.0 48.5 54.0 7.5 33.9 33.5 21.3 26.0 21.5 19.0 14.10 0.6 4.0 23.5 31.0 Design pressure Mpa Weight kg/pce Article code EN 1.62 0.08 1.0 6.05 0.1 1/4”x 1/8” 3/8”x 1/8” 3/8”x 1/4” 1/2”x 1/4” 1/2”x 3/8” 3/4”x 3/8” 3/4”x 1/2” 1”x 3/8” 1”x 1/2” 1”x 3/4” 1 1/4”x 1/2” 1 1/4”x 3/4” 1 1/4”x 1” 1 1/2”x 3/4” 1 1/2”x 1” 1 1/2”x 1 1/4” 2”x 1” 2”x 1 1/4” 2”x 1 1/2” 2 1/2”x 1 1/4” 2 1/2”x 1 1/2” 2 1/2”x 2” 3”x 2” 3”x 2 1/2” 2 8x6 10 x 6 10 x 8 15 x 8 15 x 10 20 x 10 20 x 15 25 x 10 25 x 15 25 x 20 32 x 15 32 x 20 32 x 25 40 x 20 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 32 65 x 40 65 x 50 80 x 50 80 x 65 L1 L2 ISO 7/1 -212.5 99.5 30.0 19.0 58.25 0.5 84.5 10.5 22.0 35.5 39.0 14.0 32.5 84.2 21.SLDDRW 6 8 10 15 20 25 32 40 50 65 80 32 35 40 50 55 60 70 70 81 92 101 10.0 60.5 49.0 10.5 29.11 0.0 65.0 38.2 13.5 34.5 7.0 10.4404 10.14 0.0 42.0 24.3 2.0 42.17 0.0 Weight kg/pce Article code EN 1.0 32.0 16.5 49.SLDDRW DN Dim.6 3.0 28.46 0.0 15.0 10.2 3.0 10.0 48.2 3.0 31.5 24.0 56.0 54.0 45. 0 11.22 11-0236-01 11-0236-02 11-0236-03 11-0236-04 11-0236-05 11-0236-06 0.01 0.0 20.0 21.0 11. L ISO 228/1 D NW 25 32 40 50 65 80 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 27 33 35 36 42 42 003-10-28 Threaded Fittings OT 2370 Plugs (parallel thread) 14.90 1.0 10.0 88. L ISO 228/1 NW 6 8 10 15 20 25 Article code BSP-threaded EN 1.4404 11-0237-06 11-0237-07  11-0237-08 11-0237-09 11-0237-10 11-0237-11 .SLDDRW L1 DN Dim.0 70.0 100.0 6.4 6.0 19.0 14.0 10.0 6.0 0.0 15.02 0.5 33.05 0.1 6 8 10 15 20 25 32 40 50 65 80 -235.5 13 14 19 22 30 36 46 50 65 80 90 2 R 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” Rev.36 0.12 0.4404 10 10 10 10 10 10 0.0 25.0 10.0 39.0 10.0 11.4 4.19 0.4 4.0 4.11 0.8 18.0 14 19 22 27 32 41 2 L1 DN Dim.64 2.5 21.4 6.4 6.02 0.01 0.65 Article code EN 1.SLDDRW L1 DN Dim.com/ostp 30 20 22 25 30 40 45 Design pressure Mpa Weight kg/pce 10.07 0.0 15.0 18.42 0.0 16.5 30. see www.0 4.0 10.0 25.03 0.5 59.0 1/8” 1/4” 3/8” 1/2” 3/4” 1” 13 16 17 22 24 28 -236.4 6.5 21.66 1.15 0. L ISO 7/1 NW 10.0 For more information and pressure tables.5 25.04 0.0 10.4404 Article code NPT-threaded EN 1.5 49.23 1.48 0.outokumpu.32 003-10-28 OT 2360 Plugs (parallel thread) Design pressure Weight Mpa kg/pce 7.30 0.R Threaded Fittings OT 2350 Plugs 14 17 17 21 24 27 32 33 38 45 48 8.4404 11-0235-01 11-0235-02 11-0235-03 11-0235-04 11-0235-05 11-0235-06 11-0235-07 11-0235-08 11-0235-09 11-0235-10 11-0235-11 11-0235-51 11-0235-52 11-0235-53 11-0235-54 11-0235-55 11-0235-56 11-0235-57 11-0235-58 11-0235-59 - Design pressure Mpa Weight kg/pce Article code EN 1. see www.69 1.0 33.0 4.0 10.0 4.29 0.0 10.5 25.0 0.0 4.0 6.01 0.4404 11-0238-01 11-0238-02 11-0238-03 11-0238-04 11-0238-05 11-0238-06 11-0238-07 11-0238-08 11-0238-09 11-0238-10 11-0238-11 9.0 10.4404 10.39 0.SLDDRW L1 DN Dim.17 1. L ISO 228/1 NW 6 8 10 15 20 25 32 40 50 65 80 100 Design pressure Mpa 003-10-29 OT 2310 Hexagonal caps R 16 18 20 22 27 32 36 37 43 46 50 2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” Rev.04 0.0 38.4 4.0 10.0 10.1 6 8 10 15 20 25 32 40 50 65 80 -238.0 23.4 6. L ISO 7/1 NW For more information and pressure tables.5 20.0 6.0 25.02 0.0 0.01 0.4 6.SLDDRW L1 DN Dim.0 38.86 1.4 6.11 0.52 0.06 0.5 28.25 0.5 14.4 6.0 10.5 18.74 Design pressure Mpa Weight kg/pce Article code EN 1.24 0.0 10.01 0.4 4.16 0.0 10.0 10.03 0.03 0.09 0.com/ostp 31 .5 13.08 0.74 11-0231-01 11-0231-02 11-0231-03 11-0231-04 11-0231-05 11-0231-06 11-0231-07 11-0231-08 11-0231-09 11-0231-10 11-0231-11 11-0231-12 Article code EN 1.0 14 19 22 27 32 41 50 55 70 85 95 126 003-10-28 Threaded Fittings 13 17 18 22 24 28 30 31 35 40 45 45 2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” -231.outokumpu.R Threaded Fittings OT 2380 Plugs 6 9 9 12 13 15 17 17 22 24 27 7 9 10 11 16 19 22 22 27 32 36 Weight kg/pce 10.0 10.74 0. 4 6.26 0.4 4.0 003-11-18 Threaded Fittings For more information and pressure tables.5 39.1 6 8 10 15 20 25 32 40 50 65 80 -232.5 84.5 100.0 48.com/ostp 32 Weight kg/pce Article code EN 1.05 0.01 0.0 57. L ISO 228/1 D Design pressure Mpa 10.5 14.outokumpu. see www.5 21.5 66.5 30.22 0.02 0.0 10.0 10.0 L DN Dim.4 4.3 82.13 11-0232-01 11-0232-02 11-0232-03 11-0232-04 11-0232-05 11-0232-06 11-0232-07 11-0232-08 11-0232-09 11-0232-10 11-0232-11 Weight kg/pce Article code EN 1.5 38.0 4.03 0.0 21.0 10.0 25.4404 0.0 33.0 34.03 0.0 10.03 0.0 .4404 10.48 0.28 0.5 23.4 6.5 18.4 6.0 10.05 0.02 0.5 32.0 18.75 1.02 0.0 10.0 6.SLDDRW L1 DN Dim.5 27.0 0.0 4.10 0.5 40.4 6. ISO 228/1 D 6 8 10 15 20 25 32 40 50 65 80 Design pressure Mpa 003-10-28 OT 2160 Round nuts R 13 17 18 22 24 28 31 31 37 42 46 2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” Rev.SLDDRW 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 14.0 69.5 25.3 54.R Threaded Fittings OT 2320 Round caps 9.15 0.5 26.35 11-0216-01 11-0216-02 11-0216-03 11-0216-04 11-0216-05 11-0216-06 11-0216-07 11-0216-08 11-0216-09 11-0216-10 11-0216-11 14.11 0.04 0.0 2 9 10 10 12 13 15 17 18 19 23 25 -216.0 19.0 10.14 0.0 95.5 50.0 10.09 0.0 10.0 18.0 10.5 13.0 6. 01 0.0 6.40 11-0140-03 11-0140-04 11-0140-05 Design pressure Mpa Weight kg/pce Article code EN 1.2 3.4 4.4 6.05 0.8 26.0 6.0 10.3 26.4 48.7 42.0 10.0 60.5 8 10 15 Design pressure Mpa Weight kg/pce Article code EN 1.3 2.0 2.2 48.33 0.19 0.2 3.0 4.0 10.15 0.0 10.2 21.04 0.6 20.40 0.05 0.9 33.0 10.10 0.Threaded Fittings OT 2170 Hexagonal nuts L DN Dim.4 0.4 6.0 10.com/ostp 33 .02 0.4408 10 10 10 0.3 17.0 10.7 33.4404 10.5 17.37 0.0 10.2 3.03 0.13 0. L L1 D D1 T 8 10 15 20 25 32 40 50 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 70 70 70 70 70 70 100 100 32 32 32 32 32 32 32 32 13.3 2.4 6. see www.0 20.6 Threaded Fittings OT 1410 Hose nipples For more information and pressure tables.48 11-0217-01 11-0217-22 11-0217-23 11-0217-24 11-0217-25 11-0217-26 11-0217-07 11-0217-08 11-0217-09 11-0217-10 11-0217-11 OT 1400 Claw couplings L1 DN Dim.47 11-0141-02 11-0141-03 11-0141-04 11-0141-05 11-0141-06 11-0141-07 11-0141-08 11-0141-09 DN Dim.0 10.3 60.3 13.outokumpu.07 0.04 0.22 0.4404 10.5 14.6 2.4 6.08 0.13 0.0 0. L ISO7/1 L2 D d 10 15 20 3/8” 1/2” 3/4” 109 109 109 15 15 15 20 20 30 10.38 0.4 42.6 3. ISO 228/1 NW 6 8 10 15 20 25 32 40 50 65 80 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 7 8 9 9 10 11 13 13 14 16 19 17 22 27 32 36 46 55 60 75 95 105 Design pressure Mpa Weight kg/pce Article code EN 1. 14 0.0 47.0 2 For more information and pressure tables.0 10.5 30.0 14.43 0. L L1 D D1 D2 d 25 25 25 25 25 35 35 50 11.4 6.0 50.0 6.07 0.4 OT 1430 Hose nipples 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 32 34 40 40 40 61 61 83 R 8 10 15 20 25 32 40 50 Rev.4 42.4 0.0 35.0 10.5 15.5 25.0 18.0 23.0 10.0 10.0 25.5 33.0 44.16 0.Threaded Fittings OT 1420 Hose nipples 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 70 70 70 70 70 70 100 100 R 8 10 15 20 25 32 40 50 Rev.0 38.0 4.12 0.5 11.0 21.10 0.3 26.02 0.7 42.0 2.0 40.78 11-0144-01 11-0144-02 11-0144-03 11-0144-04 11-0144-05 11-0144-06 11-0144-07 11-0144-08 11-0144-09 10.0 10.5 17.0 10.01 0.2-143.4404 0.0 10.0 40.5 20.0 32.5 4. see www.5 20.06 0.SLDDRW DN Dim. L L1 ISO 7/1 D d NW 6 8 10 15 20 25 32 40 50 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 36 40 42 48 56 65 75 78 96 -144.0 10.0 11.2 3.2 3.4404 10.0 10.2 L2 DN Dim.35 0.0 55.0 10.4 0.3 60.0 32.0 20.5 20.0 13.0 16.0 6.3 2.0 21.9 33.04 0.4 6.7 33.0 16.0 10.0 42.0 26.0 10.01 0.0 10.8 26.29 0.6 Design pressure Mpa Weight kg/pce Article code EN 1.05 0.com/ostp 34 3.0 32.05 0.4 48.0 40.17 0.0 10.SLDDR W11-06 003- Threaded Fittings OT 1440 Hose nipples 17.5 13.0 38.0 2 L2 DN Dim.2 3.4 6.3 13.2 48.02 0. L L1 ISO 7/1 D D1 T 32 32 32 32 32 32 32 32 9 9 12 13 15 17 17 22 13.5 25.0 25.5 23.0 10.3 2.0 6.17 0.0 60.5 8.03 0.0 10.6 2.41 11-0142-02 11-0142-03 11-0142-04 11-0142-05 11-0142-06 11-0142-07 11-0142-08 11-0142-09 Design pressure Mpa Weight kg/pce Article code EN 1.4 6.35 11-0143-02 11-0143-03 11-0143-04 11-0143-05 11-0143-06 11-0143-07 11-0143-08 11-0143-09 Design pressure Mpa Weight kg/pce Article code EN 1.5 7.0 12.5 19.0 25.0 14 14 19 22 30 36 46 50 65 .4404 10.6 3.5 7.0 17.0 7.0 23.0 39.08 0.0 41.0 30.04 0.0 51.4 6.0 42.5 10.0 25.0 10.8 6.02 0.0 6.0 15.0 14.0 20.0 18.5 21.outokumpu.4 6.2 21. 37 0.26 0.0 98.91 1.0 60.0 150.08 0.5 76.0 33.0 17.0 50.15 0.5 21.0 0.3 40.4 6. H ISO228/1 D 14.outokumpu.0 84.37 11-0221-01 11-0221-02 11-0221-03 11-0221-04 11-0221-05 11-0221-06 11-0221-07 11-0221-08 11-0221-09 11-0221-10 11-0221-11 11-0221-51 11-0221-52 11-0221-53 11-0221-54 11-0221-55 11-0221-56 11-0221-57 11-0221-58 11-0221-59 – – Design pressure Weight Mpa kg/pce Article code BSP-threaded EN 1. see www.4408 11-0222-01 11-0222-02 11-0222-03 11-0222-04 11-0222-05 11-0222-06 11-0222-07 11-0222-08 11-0222-09 11-0222-10 11-0222-11 11-0222-51 11-0222-52 11-0222-53 11-0222-54 11-0222-55 11-0222-56 11-0222-57 11-0222-58 11-0222-59 – – 10.0 51.0 10.0 Design pressure Weight Mpa kg/pce Article Code BSP-threaded EN 1.61 0.4 48.57 2.0 10.0 10.4 6.0 56.0 40.29 0.SLDDRW L1 DN Dim. L ISO228/1 H D 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 19 21 25 28 34 38 45 50 58 75 85 12 13 15 16 18 20 22 24 27 30 34 2 6 8 10 15 20 25 32 40 50 65 80 -222.2 48.9 33.4 6.5 21.1 8 10 15 20 25 32 40 50 32 32 32 32 32 32 32 32 13.0 6.03 0.0 160.6 3.3 17.4 4.06 0.0 100.17 0.6 68.0 57.0 4.1 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 2 6 8 10 15 20 25 32 40 50 65 80 -221.0 10.7 42.6 Weight kg/pce Article code EN 1.0 Rev.4404 0.SLDDRW L1 DN Dim.03 0.4408 Article Code NPT-threaded EN 1.16 0.0 20.04 0.28 Threaded Fittings OT 2210 Tees For more information and pressure tables.0 10.3 2.4 42.4 6.13 0.0 2.8 84.4 4.11 0.0 10.5 17.2 3.0 42.0 98.6 2.8 26.2 3.52 0.6 67.46 0.com/ostp 35 .37 19-0146-02 19-0146-03 19-0146-04 19-0146-05 19-0146-06 19-0146-07 19-0146-08 19-0146-09 19 21 25 28 34 38 45 50 58 75 80 14.08 0.04 0.0 51.0 10.7 33.3 Rev.0 003-10-28 OT 2220 Elbows 12 13 15 16 18 20 22 24 27 30 34 R 38.0 4.0 67.0 6.04 0.06 0.4408 Article code NPT-threaded EN 1.3 26.6 27.0 10.Threaded Fittings OT 1460 Double hose nipples DN D L L1 D1 T 70 70 70 70 70 70 70 70 R 13.0 116.88 3.0 10.26 0.18 1.6 27.0 33.0 10.05 0.2 3.0 90.0 17.3 2.0 10.3 60.95 1.2 21.4408 0.0 57. D T H ISO 7/1 Radius 6 8 10 15 20 25 32 40 50 65 80 50 60 70 80 100 120 140 160 190 240 290 9 11 12 15 16 19 21 21 25 30 33 003-11-06 Threaded Fittings For more information and pressure tables.0 10.0 175.4 6.3 76.0 6.35 0.5 107.14 0.5 35.15 0.1 88.5 28.3 60.5 92.22 0.0 10.2 21.2 3.3 2.0 6.5 17.0 57. see www.0 2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” -226.4 6.2 13.36 0. D T H ISO7/1 Radius 9 11 12 15 16 19 21 21 25 30 33 27.2 3.61 0.0 2.6 4.3 76.0 4.3 26.4 6.0 10.7 42.29 5.0 R 10.3 60.0 10.outokumpu.6 4.0 10.09 0.7 42.93 1.6 3.9 2.0 10.27 2.2 3.0 0.3 2.2 6 8 10 15 20 25 32 40 50 65 80 -225.3 26.6 3.2 3.10 0.4 4.2 13.9 33.2 21.4 48.0 45.R Threaded Fittings OT 2250 Bends 45° 2.05 0.SLDDRW L DN Dim.0 10.1 88.18 1.3 2.9 2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” Rev.0 2.com/ostp 36 Weight kg/pce Article code EN 1.SLDDRW L DN Dim.0 10.27 4.94 1.6 2.4 48.2 3.91 11-0226-01 11-0226-02 11-0226-03 11-0226-04 11-0226-05 11-0226-06 11-0226-07 11-0226-08 11-0226-09 11-0226-10 11-0226-11 003-11-06 OT 2260 Bends 90° 45 50 60 65 85 100 115 135 160 200 240 Design pressure Mpa 30 30 40 45 55 70 90 100 120 150 180 10.05 0.95 3.3 2.9 33.5 135.5 72.0 205.4404 10.07 3.6 2.00 11-0225-01 11-0225-02 11-0225-03 11-0225-04 11-0225-05 11-0225-06 11-0225-07 11-0225-08 11-0225-09 11-0225-10 11-0225-11 Design pressure Mpa Weight kg/pce Article code EN 1.4 6.0 4.4 4.0 10.6 3.23 0.2 3.0 10.4404 0.0 .63 0.5 17.0 10.6 3. 0-17.60 60.0 12.0 10.4 3.outokumpu.0 10.3 76.0 52.3 42.9 28.0 10.8 14.4 43.0 10.5 10.3 60.12 0.7 12.70 0.8 3.5 40.8 76.0 16.5 20.50 27.0-17.0 10.17 1.70 43.0 39.0 10.4 6.0 16.2 20.32 0.70 35.5 16.9 28.4 6.4404 10.25 42.7 12.7 12.8 60. L L1 D d T 10.0 3.5 88.0 71.6 2.5 4.7 12.0-10.20 0.1 3.0 16. see www.0 18.5 18.0-10.0 35.33 0.01 0.4 6.7 12.0 10.3 48.0 42.07 0.1 25 25 26 26 26 30 30 35 35 38 38 38 38 38 47 47 8.0 10.0 35.0 33.3 60.4 Weight kg/pce 0.14 0.0 0.2 12.4 6.0 21.0 10.0 10.0 21.0 10.5 24.0 8.0 10.1 32 38 38 41 46 46 50 50 56 56 62 62 64 67 73 8.55 0.3 76.24 0.0 10.10 14.0 10.0 10.0 33.0 12.3 26.70 76.0 44.4 6.0 10.0 13.0 10.05 0.3 17.0 19.0 10.7 16.0 10.7 35.8 4.4 3.3 57.0 30.0 10.0 12.3 48.0 45.1 Design pressure Mpa 24 30 30 38 43 43 50 50 60 60 68 68 74 88 110 10.0 10.0 42.0 17.0 15.85 1.7 12.0 6.7 16.4404 12-0131-01 12-0131-02 12-0131-03 12-0131-04 12-0131-05 12-0131-06 12-0131-07 12-0131-08 12-0131-09 12-0131-10 12-0131-11 12-0131-12 12-0131-13 12-0131-14 12-0131-15 Dim.5 66.12 0.30 12.0 10.8 4.0 48.7 12.0 29.0 10.2 20.2 4.0 17.7 12.3 26.7 12.4 6.0 48.7 12.3 34.7 35.0 44.10 17.0 10.40 Article code EN 1.0 10.2 72.0 40.5 26.3 13.03 0.0 35.7 12.0 Design pressure Mpa Weight kg/pce Article code EN 1.3 12.0 58.4 6.0 10.7 4.07 0.20 21.0 10.7 12.34 0.0 10.7 12.7 12.0 29.0 10.4 6.02 0.0 40.0 48.69 0.4 6.5 20.5 32.7 43.06 0.0 6.30 48.25 33.5 21.5 26.4 3.com/ostp 37 .11 0.5 14.5 32.3 82.7 12.30 12-0201-01 12-0201-02 12-0201-03 12-0201-04 12-0201-05 12-0201-07 12-0201-08 12-0201-09 12-0201-10 12-0201-11 12-0201-12 12-0201-13 12-0201-14 12-0201-15 12-0201-16 12-0201-17 Threaded Fittings OT 2011 Sockets socket welding For more information and pressure tables.10 0.7 12.0 12.0 13.3 3.10 0.3 54.7 5.4 43.0 14.6 27.2 12.8 4.4 4.0 18.40 20.03 0.53 0.0 32.4 6.03 0.3 21. L L1 L2 D d d1 NW 10.0 10.0 10.1 3.0 8.50 8.0 10.0 25.0 52.10 28.7 12.7 16.7 12.3 24.2 28.0 15.06 0.0 20.24 0.Threaded Fittings OT 1318 Couplings socket welding Dim.17 0.0 10. 08 0.5 76.0 100.1 3.02 0.0 10.0 10.0 90.3 12. L L1 D d d1 H 10.0 33.5 3.88 1.13 0.7 12.0 10.0 24.3 60.0 21.5 21.4 6.0 17.1 17.03 0.0 17. see www.7 12.59 0.5 21.9 28. L ISO 7/1 L2 D d T DN 1/8” 1/4” 1/4” 3/8” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1” 1” 1 1/4” 1 1/4” 1 1/2” 2” 30 30 30 30 35 35 40 40 40 40 40 40 50 50 50 50 6 9 9 9 12 12 13 13 13 15 15 15 17 17 17 22 Rev.7 12.0 50.7 12.0 13.7 12.5 16.0-17.7 15.30 53.0 2 Threaded Fittings 10.23 0.4 0.5 35.0-10.0 10.3 19 21 21 21 25 28 28 34 34 38 38 45 45 50 58 .2 4.0 76.0 42.4 24.0 10.0 10.25 35.0 10.Threaded Fittings OT 2082 Nipples socket welding L1 Dim.0 10.6 11.8 6.0 56.5 003-10-25 For more information and pressure tables.7 12.0 12.2 21.35 0.0 10.0 40.05 0.4 56.0 10.0 67.0 10.7 10.4404 10.5 2.0 40.0 8.0 90.5 17.06 0.2 12.4 20.0 5.7 11.05 0.0 33.6 11.7 43.0 35.0 56.31 0.10 15.0 33.20 25.0 10.7 12.0 42.0 10.0 57.06 0.0 27.0 6.4 6.0 42.25 38.0 51.0 10.15 0.7 12.0 68.4 6.7 38.com/ostp 38 8.7 12.2 13.0 42.0 10.3 63.0 48.07 0.8 3.0 10.4408 10.10 14.4 48.06 0.0 51.35 0.0 10.0 2.0 10.7 45.02 0.0 10.0 116.6 60.4 30.0 10.0 6.4 6.0 19.outokumpu.20 28.0 10.3 -221.0 10.0 10.8 3.2 28.5 3.20 21.13 0.16 0.1 6 8 8 10 15 15 20 20 20 25 25 25 32 32 40 50 8.0 35.40 20.4 6.0 10.21 0.1 13.7 12.4 0.5 26.20 10.0 12.2 21.0 10.2 19.4 43.3 26.20 17.6 14.0 10.7 35.2 6.0 10.7 14.0 10.3 4.5 27.0 10.30 0.25 30.3 3.5 67.7 12.0 10.4 6.0 10.62 0.13 0.2 38.7 12.5 17.6 15.18 12-0221-01 12-0221-02 12-0221-03 12-0221-04 12-0221-05 12-0221-06 12-0221-07 12-0221-08 12-0221-09 12-0221-10 12-0221-11 12-0221-12 12-0221-13 12-0221-14 12-0221-15 I Design pressure Mpa OT 2211 Tees socket welding 38.3 42.5 6.7 44.0 17.01 0.5 26.30 2.07 0.25 43.0 42.5 Weight kg/pce Article code EN 1.0 8.0 33.4 6.7 12.25 0.SLDDRW Dim.3 34.37 12-0208-01 12-0208-02 12-0208-03 12-0208-04 12-0208-05 12-0208-06 12-0208-07 12-0208-08 12-0208-09 12-0208-10 12-0208-11 12-0208-12 12-0208-13 12-0208-14 12-0208-15 12-0208-16 Design pressure Mpa Weight kg/pce Article code EN 1.02 0.50 23.3 48.2 30.0 3.06 0.5 14.0 10.7 12.30 12.2 20.6 27.5 26. 0 17.4 20.0 51.02 0.89 Article code EN 1.3 42. L D d d1 H 10.outokumpu.5 21.4 6.04 0.0 57.9 28.7 38.1 17.6 11.0 40.5 17.7 12.4 30.2 20.06 0.7 12.2 38.3 12.0 10.0 51.0 19.com/ostp 39 .4408 12-0222-01 12-0222-02 12-0222-03 12-0222-04 12-0222-05 12-0222-06 12-0222-07 12-0222-08 12-0222-09 12-0222-10 12-0222-11 12-0222-12 12-0222-13 12-0222-14 12-0222-15 Threaded Fittings 10.0 40.2 30.0 17.45 0.12 0.0 10.0 6.0 10.5 8.0 27.2 28.3 26.19 0.2 12.0-17.2 21.7 12.0 48.0 21.46 0.4 56.7 43.6 14.4 6.7 14.2 19.0 10.5 27.0 68.0 10.0 10.3 48.0 10.53 0.0 12.0-10.Threaded Fittings OT 2221 Elbows socket welding Dim.7 12.0 10.3 60.3 34.0 10.04 0.0 13.7 12.17 0.0 24.4 6.0 33.6 11.0 33.03 0.0 42.6 60.29 0.4 6.0 35.0 10.0 33.4 43.0 10.29 0.7 35.5 17.3 19 21 21 21 25 28 28 34 34 38 38 45 45 50 58 Weight kg/pce 10.14 0.7 44.0 10.1 13.7 11.7 12.4 24.7 12.0 10.5 14. see www.0 10.6 27.0 10.4 0.3 Design pressure Mpa For more information and pressure tables.0 10.6 15. For more information and pressure tables. designations and abbreviations Miscellaneous AISI ANSI API ASME ASTM AV BCW BE BS BWG CCT CPT DIN DN DNV DR/L EN EFW ERW ET (= EC) GTAW HF HT IGC-test ID ISO JIS LBW LNG LPG NB NF NHT NP NPS NS NDT OD PAW PE PED PN QA R/L RN-78 RSEW-HF SAW Sch SEP SEW SIS SSG SW SWG TIG TÜV UNS UP Vd TÜVWb WIG W. 97/23/EC American Iron and Steel Institute American National Standard Institute American Petroleum Institute American Society for Mechanical Engineers American Society for Testing and Materials Arbetsmiljöverket Bead Cold Worked Bevelled Ends British Standard Birmingham Wire Gauge Critical Crevice Temperature Critical Pitting Temperature Deutsche Institut für Normen Nominell Diameter. see www.-Nr.outokumpu. Stahl Eisen Prüfblatt Stahl Eisen Werkstoffblatt Swedish Standard Institute Standard Solutions Group Seam Welding British Standard Wire Gauge Tungsten Inert Gas Technische Überwachungs-Verein Unified Numbering System = SAW = Submerged Arc Welding Vereinigung der TÜV-Werkstoffblatt Wolfram Inert Gas (German TIG) Werkstoffnummer Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment.Tubular terminology.com/ostp 40 . Nenn Weite Det Norske Veritas Double Random Lengths (12 m) Europa Norm Electric Fusion Welding Electric Resistance Welding (HF) Eddy Current Gas Tungsten Arc Welding (same as TIG and WIG) High Frequency welding Heat Treated Intergranular Corrosion test Inside Diameter International Standardization Organization Japanese Standard Laser Beam Welding Liquefied Natural Gas Liquefied Petroleum Gas Nominal Bore Norme Francaise Not Heat Treated Nominal Pressure Nominal Pipe Size Norsk Standard Non Destructive Testing Outside Diameter Plasma Arc Welding Plain Ends Pressure Equipment Directive Pressure Number Quality Assurance Random Lengths (6 m) Rörledningsnormer -78 High frequency resistance seam welding (same as HF) Submerged Arc Welding The "Schedule" designation tells you how thick the wall is for any size of pipe with the higher schedule numbers meaning a thicker wall. 06 0.04 0.0 0.6 0. Cu - 1.0 3.0 - - 0.0 2.0 10.0 2.4833 1.4833 1.06 0.5 17.4432 1.06 2562 1.0 18.4845 C Cr Typical Ni Si N SS 0.5 12.5 11.02 22.4307 1.5 16.4878 1.0 Minimum Ni Mo 8.5 13.02 0.4003 ASTM C S40977 0.05 0.02 Cr 17.com/ostp 41 Miscellaneous Ferritic grade .0 - - - - 2.4539 254 SMO® 1.4435) 1.4818 1.4306 1.5 10.4662 S82441 0.17 0.1 0.10 2327 1.5 3.3 25.4571 (1.0 22.4438 ANSI/ISO/Metric ISO ANSI/ISO/Metric ISO/Metric ISO/Metric The compositions comply with EN.4003 For more information and pressure tables.4301 (1.1 9.0 2.5 16.4462 S32205 0.27 2328 - Austenitic 904L 1.0 18.4306) 1.02 23.0 4.4436) (1.Stainless steel grades Standard grades Outokumpu 4301 4307 4541 4306 4401 4404 4571 4436 4432 4435 4438 EN ASTM Typical C 1.04 0.4547 S31254 0. Wet corrosion resistant grades Outokumpu EN ASTM C Cr S32101 0.4362 S32304 0.0 7.4401 1.4541 1.5 2.4652 S32654 0.0 25.0 10.3 18.0 17.0 18.02 0. see www.4404) 1.4306 (1.0 18.4571 1.0 22.17 2377 1.02 0.05 0.0 10.4435 1.04 0.0 7.20 2378 - 654 SMO® 1.3 0.04 0.6 1.01 20.8 0.4401) (1.4948 1.4436 1.5 8.0 20. For other types of tube and pipe the availability is more limited and each inquiry will be evaluated individually.01 0.5 0.3 0.4835 1.3 9.50 3 Mn. which not always comply exactly with the old national standards.08 0.02 Typical Cr 11.0 12.04 0.4438 (304) 304L 321 304L 316 316L 316Ti 316 316L 316L 317L 0.4435 1.4162 5.4948 1.02 0.0 8.0 Others Ti Ti SS Stock standard Pipe/Fittings DIN 2333 (2352) 2337 2352 (2347) (2348) 2350 2343 2343 2353 2367 1.05 18.4462 2507 1.5 16.3 0.0 12.4878 1.03 21.0 4.02 25.0 6.7 3.6 20.3 0.4301 1.3 1.outokumpu.04 0.01 20.0 9.04 0.5 16.4362 LDX 2404™ 1.4404 1.5 Typical Ni Mo 1.0 16.5 2.0 10.0 4.4539 N08904 0.0 5. Outokumpu 4003 EN 1.04 2333 2337 2372 2368 - - 2361 ASTM 304H 321 S30415 S30815 - 309S 310S DIN 1.4410 S32750 0.5 Mn Stockpipe - Duralite™ ANSI ANSI Heat and creep resistant grades Outokumpu 4948 4878 153 MA™ 253 MA® 4828 4833 4845 EN 1.4828 1.5 10.1 17.4828 1. that is insignificant for the corrosion resistance.0 - - 1. Old SS and DIN-designations within brackets specifies a slightly higher Ni-content.02 0.01 24.02 24.22 N Other SS DIN Duplex LDX 2101® 2304 1.4845 These grades are available as heat exchanger tubes in minimum quantities.6 2.27 3 Mn 2205 1.4541 1.09 0.05 0.15 0.1 0.5 21.0 Mo Ti No DIN - - - 1. 637 x 1. except steel grades 1.5 15 153 MA™ 1.4845 310S 210 250 500 35 80 18 7 3 18.4362 S32304 2205 1. Design pressure at 250 °C is then 0.Mechanical and physical properties The stresses are valid for welded tubes and fittings made from welded tubes or hot rolled plate.0 Mpa.4571 1.4162.0 Rm Rm Design N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 * N/mm2 20 °C 240 230 215 225 225 235 245 250 210 650 640 100 °C 211 191 181 199 199 208 218 235 170 590 590 150 °C 191 172 158 181 181 196 206 220 153 560 570 200 °C 177 157 145 167 167 186 196 205 135 540 550 627 540 Miscellaneous 250 °C 167 145 137 157 157 177 186 190 125 300 °C 156 135 127 145 145 167 175 175 115 350 °C 150 129 121 139 139 161 169 165 - 400 °C 144 125 116 135 135 156 164 155 105 450 °C 141 122 112 130 130 152 160 145 500 °C 139 120 109 128 128 149 158 140 550 °C 137 120 108 127 127 147 157 135 Sample: OT 100 Process pipe ISO dimension 457 x 3.4307 304L 200 240 500 45 200 147 118 89 240 181 147 116 17 15 4306 1.0 Rp 1.outokumpu. The figures in the table refer to EN 10217-7.4162. Proof strength at elevated temperatures in the solution annealed condition.000h 2 2 N/mm N/mm 600°C 700°C 800°C 900°C 600°C 700°C 800°C 900°C 20-800°C 4878 1.2 Rp1.4438 317L 220 260 520 40 220 175 155 125 260 205 185 155 16 14 LDX 2101® 1. Steel Grade 1. For pressure purpose PMA is used.0 20-100°C 20°C 20°C 100°C 200°C 400°C 20°C 100°C 200°C 400°C x10-6/°C W/m°C 4301 1.6 MPa.4547 S31254 300 340 650 40 300 230 190 160 340 270 225 190 16.0 Rp 1.4571 316Ti 4436 1. EN 10253-4. Designations Outokumpu EN ASTM Coefficient Thermal Strength at high temperatures of linear conduct.2 Rp1.6 = 1.4404 316L 220 260 520 45 220 166 137 108 260 199 167 135 16 15 210 440 30 170 135 105 170 135 105 15. NOTE! For steel grade EN 1. *) 1.4436 316 220 260 530 40 220 177 147 115 260 211 177 144 16 15 4432 1. EN 1.4541 321 200 240 500 40 200 176 157 125 240 208 186 156 17 15 4307 1.4432 1.0 Rp 1.4436 1.4818 S30415 290 330 600 40 80 26 9 3 88 35 14 5 19 15 253 MA® 1.outokumpu.0 in steelgrade EN 1.4307 according to EN 10217-7.4462 S32205 460 640 25 -40 460 360 315 13 15 2507 1.5 14 430 460 750 40 15 11 654 SMO® 430 350 315 295 470 390 355 330 EN–Rm 100.com/ostp www. expansion EN min values N/mm2 Rp0.0 100.4306 304L 200 240 500 45 200 147 118 89 240 181 147 116 17 15 4401 1. Design pressure at 20 °C is 1.0 Rp 1. For more information and pressure tables.0 Rm N/mm2 N/mm2 N/mm2 % °C* 1.0 Rp 1.4162 (LDX 2101®) is not yet included in any EN standard.4162 S32101 450 650 30 -40 450 380 330 13 15 480 680 25 -40 480 385 325 13 15 400 630 25 -40 400 330 280 13 15 LDX 2404™ 2304 Strength at 20°C EN min values A5 Rp0.4539 1.4541 1.4408 316 4571 1.8 220 260 520 40 220 185 167 135 260 213 196 164 16 15 4408 1.4462 T Rp 1.4408 and 1.4301 1.4307 1.4301 304 210 250 520 45 210 157 127 98 250 191 157 125 16 15 4541 1. Please contact our R&D or application engineers for more information.000h EN–Rp1. LDX 2101®.com 42 .8 15.0 Rp 1.4162 1.4878 321 190 230 500 40 65 22 10 19 15 4845 1.0 Rp 1. see www.4435 316L 220 260 520 45 220 165 137 108 260 200 165 135 16 15 4438 1.4401 316 220 260 520 45 220 177 147 115 260 211 177 144 16 15 4404 1.0 Rp 1.4408 1.4410 S32750 530 730 20 -40 530 450 400 13 15 904L 1.4462 (2205) the figures are expressed in Rm.4432 316L 220 260 520 45 220 165 137 108 260 200 165 135 16 15 4435 1.4835 S30815 310 350 650 40 80 26 11 6 88 35 15 8 19 15 * Min allowable temperature.4539 N08904 220 260 520 35 220 205 175 125 260 235 205 155 16 12 254 SMO® 1.4404 1. 0 6. minimum quantities etc.6 25 LDX 2101® 21. standards. and its effect on corrosion resistance is 16 times that of Cr.5Mo 17.1 23 Cr-Ni-2. 254 SMO® 2507 Cr-Ni Cr-Ni-Mo 20 400 1000 14500 35000 30 350 750 11500 28000 40 300 600 9500 22000 50 200 450 7500 18000 43 Miscellaneous 904 L 2205 Temp.0 1.0 2.27 33 2205 22. The next step is to investigate the ­ ­availability of the specified product forms.0 4.0 0.22 26 2304 23. Nitrogen (N) is also added in the modern developed stainless steels. Outokumpu Cr Mo N PRE Cr-Ni 18. formability.3 0. pH = 6-8. dimensions. O2= 4-8 ppm. Other factors are cost for material and construction.5 0.1 0.10 26 LDX 2404™ 24. For decreasing pH-values below 7 the risk for corrosion increase. expected lifetime and approvals.0 2. PRE = %Cr+3.27 43 254 SMO® 20.Material selection and design Selection of a stainless steel grade Stainless steels are used mainly due to their corrosion resistance.06 35 2507 25. °C .3 0.3 times higher effect than Cr. With increasing amounts of Cr the ­corrosion resistance increases.0 3. There are several aspects to consider at material selection before the choice finally can be decided. in order to prevent pitting and crevice corrosion.0 4. A number calculated from the Pitting Resistance Equivalent PRE indicates the pitting corrosion resistance of an alloy. but also thanks to their excellent mechanical properties.and iron oxides that forms spontaneously in contact with oxidants.1 0.6 0. but also the availability for future construction or maintenance.3 0.20 43 Factors influencing the corrosivity The risk for corrosion attack on stainless steels in waters increases when following parameters ­increase.17 35 904L 20.0 – 18 Cr-Ni-Mo 17.0 0. weldability and appearance. when the order is placed. Molybdenum (Mo) is an alloy that is added because it has a 3.3x%Mo+16x%N. chlorination <1 ppm. Earlier experience is an important factor in order to put together a group of candidate materials. Corrosion resistance Stainless steels are resistant thanks to the invisible passive layer consisting of chromium. • Temperature °C • Chloride content ppm Cl ¯ • Oxygen content ppm O2 • Chlorination ppm ClO2 • pH-value Recommended maximum chloride contents (ppm or mg/l) at different temperatures and normal conditions. ”Tools” and ”Pressure Calculation”.1 or B31.outokumpu.5 . and in many other countries ASME B31. Using pipe systems with thinner walls and/or grades with higher strength makes significant weight and cost savings. The stainless surface is corrosion resistant and durable. The user is however free to select the dimension standard and grade. Calculation of loss of pressure due to friction Stainless steels are not sensitive for high water velocity.04 for standard pipe products.com. Miscellaneous 44 .4 for a 90° elbow and for a tee to 0.20.Material selection and design Stainless steel grades for different waters at ambient temperatures Drinking water: 4307. Tools for calculating loss of pressure is available at www. Pipe systems designed with Metric Tru-Bore® and/or ISO are lighter compared to pipe systems designed with ANSI dimensions.com. LDX 2101® Brackish water: 2205 Deaerated seawater: 2205 Fresh seawater. as substitute for the Austenitic standard grades. 2507 Desalination SWRO: 254 SMO®. The friction coefficient can be set to 0. Pressure calculation tool is available at www.3 are used.004 for hygienic tubes with a higher surface finish. In most European countries the Pressure Equipment Directive 97/23/EC is mandatory.outokumpu. select ”Products”. more cost saving is possible. and down to 0. 2507 Design of dimension and grade Pipe systems have to be designed according to the valid safety and design regulation. LDX 2101® Polluted water: 4432.3. Water speeds exceeding 20 m/sec are not a problem. select ”Products”. offshore: 254 SMO®.0. 4404. for fittings the friction coefficient can be set to 0. By using thin walled pipe made from any of the high strength Duplex stainless steels. ”Tools” and ”Pressure Drop Calculation”. and will remain the same through the years. V. Occupational Health and Safety Management System. . 45 Miscellaneous • OSTP is approved by most of the common notified bodies. • Our Quality Systems are certified in accordance with the EN ISO 9001.Certifications and approvals Our main certifications and approvals OSTP is proud of its reputation as a reliable supplier and a manufacturer of high quality products. These are our main certifications: • We deliver according to PED 97/23/EC and have a quality system for the manufacturing of pressure equipment components and for manufacturing components. In addition to satisfied customers. OHSAS 18001. Environmental Management System Standard. the proof of this can be seen in our quality certifications. • OSTP is certified according to AD2000-W0 approved by TÜV Nord e. Quality Management System Standard and EN ISO 14001. com/contacts Miscellaneous 46 .Contacts OSTP E-mail: stainless.com Website: www. Sweden Telephone: +46 (0)226 810 00 Fax: +46 (0)8 208 481 Addresses available on: www.outokumpu.outokumpu.com Head office: SE-103 27 Stockholm.info@outokumpu. . Suggestions for or descriptions of the end use or application of products or methods of working are for information only and Outokumpu and its affiliated companies accept no liability in respect thereof.Product Catalogue 2012 www. 1082. Sweden. Care has been taken to ensure that the contents of this publication are accurate but Outokumpu and its affiliated companies do not accept responsibility for errors or for information that is found to be misleading.com OSTP OSTP 1345-EN-GB:3. November 2011. RCB2. Information given in this catalogue may be subject to alterations without notice.outokumpu. Before using products supplied or manufactured by the company the customer should satisfy himself of their suitability. OSTP – Outokumpu Stainless Tubular Products Threaded Fittings Product Catalogue 2012 .