Powerwave Antennas 2007

ANTENNA SYSTEMSBroadband • Single • Dual • Triple • Indoor Antennas •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Y O U R PA R T N E R I N C O N C E P T S A N D C O M P E T I T I V E T E C H N O L O G I E S 4168.11.33.00 Single Band Urban Antenna 65° 0.7 m vertical polarized FET Antenna Part Number: 7270.02 Horizontal Beamwidth: 65° Gain: 12.5 dBi / 10.4 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antenna’s characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service Single Band Metro Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 12.5 / 10.4 Linear vertical 50 < 1.3:1 65° 0° 28° >10 > 24 300 <-150 Typical Horizontal and Vertical 7270.02 Patterns 824-896 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc) All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 660x256x50mm (2’2”x10”x2”) 7.6 kg (16.6 lbs) 213 N (47.8 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 770x308x121mm (2’6”x1’x5”) 8.3 kg (18.2 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08048 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ©Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. 4168.11.33.00 Single Band Urban Antenna 65° 1.3 m vertical polarized FET Antenna Part Number: 7271.02 Horizontal Beamwidth: 65° Gain: 15.5 dBi / 13.4 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antenna’s characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service Single Band Metro Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 15.5 / 13.4 Linear vertical 50 < 1.3:1 65° 0° 14° >17 > 24 500 <-150 Typical Horizontal and Vertical 7271.02 Patterns 824-896 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc) All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2“ ) 7 kg (15.4 lbs) 376 N (95.6 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5“ ) 8.5 kg (18.7 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08049 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ©Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. 4168.11.33.00 Single Band Urban Antenna 65° 1.3 m vertical polarized FET Antenna Part Number: 7271.03 Horizontal Beamwidth: 65° Gain: 15 dBi / 12.9 dBd Electrical Downtilt: 5º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antenna’s characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service Powerwave. HxWxD Weight Including Bracket Wind Load. @2x43dBm (dBc) All specifications are subject to change without notice. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08050 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.9 Linear vertical 50 < 1. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.5 kg (18. Contact your Powerwave representative for complete performance data. Powerwave Technologies. co-polar (dB) Maximum input power (W) IM3. Inc. 42 m/s.6 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5“ ) 8.7 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Frontal. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.powerwave. Andrew Place Santa Ana.4 lbs) 376 N (95. Mechanical Specifications Connector Type Connector Position Dimensions. Inc.4:1 65° 0° 14° >15 > 24 500 <-150 Typical Horizontal and Vertical 7271. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2“ ) 7 kg (15. All Rights reserved.Single Band Metro Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 824 – 896 15 / 12. 1801 East St.03 Patterns 824-896 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. Powerwave Technologies. Inc. .com ©Copyright September 2003. 00 Single Band Urban Antenna 65° 1. Made from corrosionresistant aluminum and PVC.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.02 Horizontal Beamwidth: 65° Gain: 17 dBi / 14. whether domestic or commercial.33. lasting service even in the most demanding environments. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . State-of-the-art patch technology allows the antenna’s characteristic flat design. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.3 m vertical polarized FET Antenna Part Number: 7272.11.4168. This makes it an ideal choice for built-up areas. com ©Copyright September 2003. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2“ ) 11kg (24 lbs) 625 N (140 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5“ ) 13kg (29 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc.02 Patterns 824-896 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth Vertical beam squint First upper sidelobe suppression (dB) Front-to-back ratio.4° >18 > 24 500 <-150 Typical Horizontal and Vertical 7272. Andrew Place Santa Ana. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Powerwave.4:1 65° 0° 9. 1801 East St.Single Band Metro Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 17 / 14. . Frontal. 42 m/s. Inc. Mechanical Specifications Connector Type Connector Position Dimensions. Powerwave Technologies. co-polar (dB) Maximum input power (W) IM3. HxWxD Weight Including Bracket Wind Load. All Rights reserved.9 Linear vertical 50 < 1. @2x43dBm (dBc) All specifications are subject to change without notice.powerwave. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08051 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.5° 0. Contact your Powerwave representative for complete performance data. Powerwave Technologies. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 00 Single Band Urban Antenna 65° 1.11.3 m vertical polarized FET Antenna Part Number: 7273.0 dBi / 15. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. whether domestic or commercial. Made from corrosionresistant aluminum and PVC.33. This makes it an ideal choice for built-up areas. State-of-the-art patch technology allows the antenna’s characteristic flat design.4168.02 Horizontal Beamwidth: 65° Gain: 18. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. lasting service even in the most demanding environments. co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3. Contact your Powerwave representative for complete performance data. Inc. Powerwave.powerwave. Frontal. 42 m/s. Powerwave Technologies. All Rights reserved. .Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 824 – 896 18. Andrew Place Santa Ana. @2x43dBm (dBc) All specifications are subject to change without notice.02 Patterns 824-896 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Inc. Mechanical Specifications Connector Type Connector Position Dimensions. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08052 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.9 Linear vertical 50 < 1.3:1 65° 0° 7° >18 0. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2" ) 14kg (31 lbs) 373 N (84 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5" ) 17kg (34.0 / 15. 1801 East St. HxWxD Weight Including Bracket Wind Load.5 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.com ©Copyright September 2003. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. Powerwave Technologies.3° > 24 > -22 500 <-150 Typical Horizontal and Vertical 7273. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. whether domestic or commercial. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . This makes it an ideal choice for built-up areas.4 dBd Electrical Downtilt: 4º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.33. State-of-the-art patch technology allows the antenna’s characteristic flat design.6 m vertical polarized FET Antenna Part Number: 7273.4168. lasting service even in the most demanding environments.03 Horizontal Beamwidth: 65° Gain: 17.5 dBi / 15.11.00 Single Band Urban Antenna 65° 2. Made from corrosionresistant aluminum and PVC. Inc.03 Patterns 824-896 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. @2x43dBm (dBc) All specifications are subject to change without notice. HxWxD Weight Including Bracket Wind Load. Contact your Powerwave representative for complete performance data.4 Linear vertical 50 < 1.com ©Copyright September 2003. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.3:1 65° 4° 7° >17 < 0.3° > 22 > -22 500 <-150 Typical Horizontal and Vertical 7273. Powerwave Technologies.5 / 15. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm ( 8' 6"x10"x2") 14kg (31 lbs) 728 N (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8'10"x1'x5") 17kg (34. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08128 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Andrew Place Santa Ana. 42 m/s. . 1801 East St. Powerwave.powerwave. All Rights reserved. Frontal.5 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 17. Inc. co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3. Powerwave Technologies. Mechanical Specifications Connector Type Connector Position Dimensions. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . State-of-the-art patch technology allows the antenna’s characteristic flat design.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. lasting service even in the most demanding environments.0 dBi / 11. whether domestic or commercial.11.00 Single Band Urban Antenna 90° 1. Made from corrosionresistant aluminum and PVC.3 m vertical polarized FET Antenna Part Number: 7276.4168.33. This makes it an ideal choice for built-up areas.02 Horizontal Beamwidth: 90° Gain: 14. HxWxD Weight Including Bracket Wind Load. All Rights reserved. . Powerwave Technologies.5lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.02 Patterns 824-896 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. co-polar (dB) Maximum input power (W) IM3. Inc. @2x43dBm (dBc) All specifications are subject to change without notice.5kg (16. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.4° > 20 500 <-150 Typical Horizontal and Vertical 7276. Inc.3:1 90° 0° 14. Inc.0 / 11. Contact your Powerwave representative for complete performance data. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x160x55mm (4'4"x6"x2") 6kg (13lbs) 233 N (52 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x216x156mm (4'8"x8"x6") 7. Mechanical Specifications Connector Type Connector Position Dimensions. Powerwave. 42 m/s.9 Linear vertical 50 < 1. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 14.5° >17 < 0. 1801 East St. Frontal.com ©Copyright September 2003.powerwave. Andrew Place Santa Ana. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08129 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 4168. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .0 dBi / 12.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. whether domestic or commercial.02 Horizontal Beamwidth: 90° Gain: 15. This makes it an ideal choice for built-up areas. lasting service even in the most demanding environments.33.11. Made from corrosionresistant aluminum and PVC. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.00 Single Band Urban Antenna 90° 1.9 m vertical polarized FET Antenna Part Number: 7277. State-of-the-art patch technology allows the antenna’s characteristic flat design. 5° >17 < 0. All Rights reserved.powerwave. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1940x160x55mm (6'4"x6"x2") 9kg (20lbs) 342 N (77 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x216x156mm (6‘9"x8"x6") 12kg (26. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. HxWxD Weight Including Bracket Wind Load. Frontal.com ©Copyright September 2003. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. . Powerwave. co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3.02 Patterns 824-896 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Powerwave Technologies. Powerwave Technologies. Contact your Powerwave representative for complete performance data.3° > 21 > -15 500 <-150 Typical Horizontal and Vertical 7277. 1801 East St. Mechanical Specifications Connector Type Connector Position Dimensions.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 15. Inc. @2x43dBm (dBc) All specifications are subject to change without notice.5lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 42 m/s. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08131 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Andrew Place Santa Ana. Inc.0 / 12.9 Linear vertical 50 < 1. Inc.3:1 90° 0° 9. whether domestic or commercial.0 dBi / 13. State-of-the-art patch technology allows the antenna’s characteristic flat design. This makes it an ideal choice for built-up areas. lasting service even in the most demanding environments. Made from corrosionresistant aluminum and PVC. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .6 m vertical polarized FET Antenna Part Number: 7278.02 Horizontal Beamwidth: 90° Gain: 16.4168.00 Single Band Urban Antenna 90° 2.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.33. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.11. com ©Copyright September 2003. @2x43dBm (dBc) All specifications are subject to change without notice.9 Linear vertical 50 < 1. Andrew Place Santa Ana. Inc.3° > 21 > -22 500 <-150 Typical Horizontal and Vertical 7278. Contact your Powerwave representative for complete performance data. co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3. Inc. HxWxD Weight Including Bracket Wind Load.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 16. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Frontal.0 / 13.3:1 90° 0° 7° >17 < 0. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08130 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.02 Patterns 824-896 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. . Powerwave Technologies. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Mechanical Specifications Connector Type Connector Position Dimensions.powerwave. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x160x55mm (8‘6"x6"x2") 11kg (24lbs) 455 N (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (8‘10"x8"x6") 14kg (31lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. 42 m/s. 1801 East St. Powerwave. All Rights reserved. 33. hence the most efficient system performance.01 Horizontal Beamwidth: 65° Gain: 15 dBi / 12. Powerwave has produced a variety of designs that ensure the isolation.00 Single Band X-Urban Antenna 65º 1. As a result of thorough. thus substantially enhancing system benefits. indepth research and testing.11. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio).9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. isolation beam squint and tracking. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance .4168. This design ensures minimized intermodulation products.3 m X-polarized FET Antenna Part Number: 7263. Inc. 42 m/s. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave.4:1 > 30 65° < 0. Inc. Contact your Powerwave representative for complete performance data.01 Patterns All specifications are subject to change without notice.3° >22 >18 500 <-150 Typical Horizontal and Vertical 7263. All Rights reserved. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.5 kg (16. @2x43dBm (dBc) 824 – 896 15 / 12.4” x2” ) 7. co-polar (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3.5 lbs) 419 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (56” x 12” x 5” ) 8. 1801 East St.com ©Copyright September 2003. Powerwave Technologies. Andrew Place Santa Ana.9 Linear slanted ± 45° 50 < 1.5 kg (19 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.Single Band X-Urban Antenna Electrical Specifications 824-896 MHz Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08126 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. . CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (52“ x 10. HxWxD Weight Including Bracket Wind Load. Mechanical Specifications Connector Type Connector Position Dimensions.powerwave. Frontal.5 0° 13° > 14 < 0. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Powerwave Technologies. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio).11. As a result of thorough. isolation beam squint and tracking. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance .9 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. hence the most efficient system performance. indepth research and testing.33.04 Horizontal Beamwidth: 65° Gain: 15 dBi / 12. Powerwave has produced a variety of designs that ensure the isolation. thus substantially enhancing system benefits.00 Single Band X-Urban Antenna 65º 1. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain.3 m X-polarized FET Antenna Part Number: 7263.4168. This design ensures minimized intermodulation products. Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. 42 m/s. Mechanical Specifications Connector Type Connector Position Dimensions.5 6° 13° > 14 < 0.4” x2” ) 7. co-polar (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. Inc.04 Patterns All specifications are subject to change without notice.5 kg (19 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. All Rights reserved.com ©Copyright September 2003. Powerwave Technologies.5 kg (16. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08127 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Inc. Andrew Place Santa Ana.5 lbs) 419 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (56” x 12” x 5” ) 8.4:1 > 30 65° < 0.powerwave. .9 Linear slanted ± 45° 50 < 1. Powerwave Technologies. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (52“ x 10. 1801 East St. HxWxD Weight Including Bracket Wind Load. @2x43dBm (dBc) 824 – 896 15 / 12. Frontal. Powerwave.3° >22 >18 500 <-150 824-896 MHz Typical Horizontal and Vertical 7263. Inc. Contact your Powerwave representative for complete performance data. Made from corrosionresistant aluminum and PVC.33.00 Single Band X-Urban Antenna 65° 1. This makes it an ideal choice for built-up areas.11. lasting service even in the most demanding environments.4168.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® X-Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.02 Horizontal Beamwidth: 65° Gain: 16.9 m X-polarized FET Antenna Part Number: 7281. State-of-the-art patch technology allows the antenna’s characteristic flat design. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .5 dBi / 14. whether domestic or commercial. 5 0° 9° > 15 < 0. Powerwave Technologies. Powerwave Technologies. . co-polar (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1939x256x50mm (6'4"x10"x2") 9kg (20lbs) 547 N (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6'9"x1'x5') 10kg (22lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 1801 East St.3:1 > 30 65° < 0. HxWxD Weight Including Bracket Wind Load. Mechanical Specifications Connector Type Connector Position Dimensions.5 / 14. Inc. Andrew Place Santa Ana.com ©Copyright September 2003. All Rights reserved. Powerwave. Contact your Powerwave representative for complete performance data. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08132 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Inc.powerwave.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 16. Frontal. 42 m/s.4 Linear vertical 50 < 1. @2x43dBm (dBc) 824-896 MHz All specifications are subject to change without notice.3° > 24 > 20 500 <-150 Typical Horizontal and Vertical 7281.02 Patterns Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Horizontal tracking (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Inc. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. lasting service even in the most demanding environments.5 dBi / 14.33.00 Single Band X-Urban Antenna 65° 1.11. This makes it an ideal choice for built-up areas.4168. whether domestic or commercial. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.04 Horizontal Beamwidth: 65° Gain: 16.9 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® X-Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. Made from corrosionresistant aluminum and PVC. State-of-the-art patch technology allows the antenna’s characteristic flat design. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .9 m X-polarized FET Antenna Part Number: 7281. 4 Linear vertical 50 < 1. HxWxD Weight Including Bracket Wind Load. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 / 14. Inc.powerwave. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1939x256x50mm (6'4"x10"x2") 9kg (20lbs) 547 N (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6'9"x1'x5') 10kg (22lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies.3° > 24 > 20 500 <-150 Typical Horizontal and Vertical 7281.com ©Copyright September 2003. @2x43dBm (dBc) All specifications are subject to change without notice.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 824 – 896 16. Frontal. Powerwave Technologies.04 Patterns 824-896 MHz Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Horizontal tracking (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.5 6° 9° > 14 < 0. 42 m/s. Mechanical Specifications Connector Type Connector Position Dimensions. Inc.3:1 > 30 65° < 0. 1801 East St. . co-polar (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. Andrew Place Santa Ana. Contact your Powerwave representative for complete performance data. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08223 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave. All Rights reserved. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . Made from corrosionresistant aluminum and PVC. This makes it an ideal choice for built-up areas.4168.33. lasting service even in the most demanding environments.00 Single Band X-Urban Antenna 65° 0. State-of-the-art patch technology allows the antenna’s characteristic flat design.11. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.5 dBi / 10.4 dBd Electrical Downtilt: 4º Connector Type: 7/16 DIN female 824-896 MHz The Powerwave® X-Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.7 m vertical polarized FET Antenna Part Number: 7282. whether domestic or commercial.03 Horizontal Beamwidth: 65° Gain: 12. 5 4° 25° >9 < 0. co-polar (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3.com ©Copyright September 2003. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 / 10. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 659x256x50mm (2'2"x10"x2") 4kg (9lbs) 5186 N (42 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 750x308x121mm (2'6"x1'x5') 5kg (11lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. All Rights reserved. 42 m/s. 1801 East St. Andrew Place Santa Ana.03 Patterns Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Horizontal tracking (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Contact your Powerwave representative for complete performance data. Powerwave. Frontal. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08142 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. Inc.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) 824 – 896 12. Inc. Mechanical Specifications Connector Type Connector Position Dimensions.powerwave. Inc.4 Linear vertical 50 < 1. Powerwave Technologies. HxWxD Weight Including Bracket Wind Load. @2x43dBm (dBc) 824-896 MHz All specifications are subject to change without notice.3:1 > 30 65° < 0. .3° > 22 > 20 250 <-150 Typical Horizontal and Vertical 7282. 00 Broadband ALP Antenna 40° 1. Key Benefits: • Cutting Edge Network Performance • Reduced Logistic Costs • High Volume Capability . The Powerwave log periodic is manufactured in a highly repeatable process that is so precise that absolutely no tuning is required.00R2A Horizontal Beamwidth: 40° Gain: 17 dBi / 14.9 dBd Electrical Downtilt: 0° Connector Type: DIN The new Powerwave log periodic antennas have a narrower profile than our previous models. we use a robust mechanical design that includes high-strength plates of aircraft quality aluminum used to form an extremely rugged package. In addition. For long life and problem free performance.33.4168. the mechanical strength is independent of the random. which acts only to physically protect and form a weather shield for the elements. We replaced the previous 110 degree log periodic elements with a 90 degree log periodic element.4 m vertical-polarized FET Antenna 806-960 MHz Part Number 7804.11. 1801 East St.6 kg (31 lbs) 859 N ( 193 lbf) 70m/s (156 mph) DC grounded PVC Light Gray 1389x627x394mm (4’7”x2’1”x1’4” ) 17. Mechanical Specifications Connector Type Connector Position Dimensions.9 50 <1.00R2APatterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM. 3rd order.2 lbs) 14.com ©Copyright September 2003. Frontal. Inc. Powerwave Technologies.Broadband ALP Antenna Electrical Specifications Frequency Range (MHz) 806-960 Linear vertical 17 / 14. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 42 m/s Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. @2x43dBm (dBc) All specifications are subject to change without notice. Powerwave.4:1 40° 14° 0° >35 >18 500 <-146 Typical Horizontal and Vertical 7804. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08026 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. HxWxD Weight without Bracket Weight including Bracket Wind Load. .3 kg (38 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. All Rights reserved. Andrew Place Santa Ana. Powerwave Technologies.powerwave. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Back 1320x590x350mm (4’4”x1’11”x1’2” ) 11 kg (23. Contact your Powerwave representative for complete performance data. This makes it an ideal choice for built-up areas.00 Single Band Urban Antenna 65° 0. lasting service even in the most demanding environments. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.11.33.04 Horizontal Beamwidth: 65° Gain: 13 dBi / 10. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .4168. Made from corrosionresistant aluminum and PVC. whether domestic or commercial. State-of-the-art patch technology allows the antenna’s characteristic flat design.7 m vertical polarized FET Antenna Part Number: 7225. Contact your Powerwave representative for complete performance data. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08055 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.com ©Copyright September 2003. 1801 East St. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Frontal. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 660x256x50mm (4’4”x10”x2”) 5kg (11 lbs) 190 m/s (43 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 770x308x121mm (2’6”x1’x5”) 6kg (13 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. @2x43dBm (dBc) All specifications are subject to change without notice.powerwave. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.1 65° 0° 26° >9 > 25 300 <-150 Typical Horizontal and Vertical 7225. co-polar (dB) Maximum input power (W) IM3.04 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. HxWxD Weight Including Bracket Wind Load.3.9 Linear vertical 50 < 1. Powerwave Technologies. Powerwave. Powerwave Technologies.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 13 / 10. All Rights reserved. . 42 m/s. Andrew Place Santa Ana. Mechanical Specifications Connector Type Connector Position Dimensions. This makes it an ideal choice for built-up areas. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .11.5 dBi / 13.00 Single Band Urban Antenna 65° 1.3 m vertical polarized FET Antenna Part Number: 7226.03 Horizontal Beamwidth: 65° Gain: 15.4 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.33. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. whether domestic or commercial. State-of-the-art patch technology allows the antenna’s characteristic flat design.4168. lasting service even in the most demanding environments. Made from corrosionresistant aluminum and PVC. 3. Andrew Place Santa Ana. Contact your Powerwave representative for complete performance data. 42 m/s. Powerwave Technologies.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 15. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08055 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. . Inc.5kg (18 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. HxWxD Weight Including Bracket Wind Load.1 65° 6° 14° >17 > 25 500 <-150 Typical Horizontal and Vertical 7226.powerwave. Powerwave. Frontal. All Rights reserved. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4’4”x10”x2”) 7kg (15 lbs) 373 m/s (84 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4’8”x1’x5”) 8. Mechanical Specifications Connector Type Connector Position Dimensions. @2x43dBm (dBc) All specifications are subject to change without notice. co-polar (dB) Maximum input power (W) IM3.5 / 13. 1801 East St. Inc.4 Linear vertical 50 < 1. Inc.com ©Copyright September 2003.03 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. Powerwave Technologies. 4168.3 m vertical polarized FET Antenna Part Number: 7226.11. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . whether domestic or commercial. Made from corrosionresistant aluminum and PVC.33.04 Horizontal Beamwidth: 65° Gain: 15. State-of-the-art patch technology allows the antenna’s characteristic flat design.00 Single Band Urban Antenna 65° 1.5 dBi / 13. lasting service even in the most demanding environments.4 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas. Powerwave Technologies.powerwave. @2x43dBm (dBc) All specifications are subject to change without notice. 42 m/s.5 / 13. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08056 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 15.5kg (18 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.4 Linear vertical 50 < 1. Inc. Andrew Place Santa Ana. Mechanical Specifications Connector Type Connector Position Dimensions.3. HxWxD Weight Including Bracket Wind Load. 1801 East St. Contact your Powerwave representative for complete performance data.1 65° 0° 14° >17 > 23 500 <-150 Typical Horizontal and Vertical 7226. Inc. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. . All Rights reserved.04 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio.com ©Copyright September 2003. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4’4”x10”x2”) 7kg (15 lbs) 373 m/s (84 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4’8”x1’x5”) 8. Powerwave Technologies. Powerwave. Frontal. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. co-polar (dB) Maximum input power (W) IM3. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.13 Horizontal Beamwidth: 65° Gain: 17.00 Single Band Urban Antenna 65° 1. lasting service even in the most demanding environments.11. Made from corrosionresistant aluminum and PVC.03.4168.9 m vertical polarized FET Antenna Part Number: 7227.0 dBi / 14. whether domestic or commercial. State-of-the-art patch technology allows the antenna’s characteristic flat design.9 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. 7227.33. This makes it an ideal choice for built-up areas. Powerwave.0 / 14.04 Patterns 870-960 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08057 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.1 65° 6° 9° >18 > 24 >-16 500 <-150 Typical Horizontal and Vertical 7227. Mechanical Specifications Connector Type Connector Position Dimensions.com ©Copyright September 2003. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.3. Inc. . co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. Powerwave Technologies.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 870 – 960 17. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1940x256x50mm (6’4”x10”x2”) 11kg (24 lbs) 548 m/s (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6’9”x1’x5”) 13kg (29 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Contact your Powerwave representative for complete performance data. 1801 East St. Inc. Powerwave Technologies. Frontal.powerwave. 42 m/s. All Rights reserved. Inc. HxWxD Weight Including Bracket Wind Load.9 Linear vertical 50 < 1. Andrew Place Santa Ana. @2x43dBm (dBc) All specifications are subject to change without notice. 7227.11. Made from corrosionresistant aluminum and PVC. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .9 m vertical polarized FET Antenna Part Number: 7227.04. lasting service even in the most demanding environments.33. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas.14 Horizontal Beamwidth: 65° Gain: 17. State-of-the-art patch technology allows the antenna’s characteristic flat design.4168.00 Single Band Urban Antenna 65° 1.0 dBi / 14. whether domestic or commercial. Mechanical Specifications Connector Type Connector Position Dimensions. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08057 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Frontal. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1940x256x50mm (6’4”x10”x2”) 11kg (24 lbs) 548 m/s (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6’9”x1’x5”) 13kg (29 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 42 m/s. Powerwave Technologies.3. All Rights reserved. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. Inc.com ©Copyright September 2003. Inc.9 Linear vertical 50 < 1. Inc. Andrew Place Santa Ana.04 Patterns 870-960 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. Powerwave Technologies. HxWxD Weight Including Bracket Wind Load. .0 / 14. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.powerwave. 1801 East St. Powerwave. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.1 65° 0° 9° >17 > 23 >-13 500 <-150 Typical Horizontal and Vertical 7227.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 870 – 960 17. Contact your Powerwave representative for complete performance data. @2x43dBm (dBc) All specifications are subject to change without notice. 4168.00 Single Band Urban Antenna 65° 1.9 dBd Electrical Downtilt: 4º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. whether domestic or commercial. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .0 dBi / 14. 7227.16 Horizontal Beamwidth: 65° Gain: 17. State-of-the-art patch technology allows the antenna’s characteristic flat design.11.33. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.06. This makes it an ideal choice for built-up areas.9 m vertical polarized FET Antenna Part Number: 7227. Made from corrosionresistant aluminum and PVC. lasting service even in the most demanding environments. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. All Rights reserved. 1801 East St.0 / 14. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Andrew Place Santa Ana. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08057 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. HxWxD Weight Including Bracket Wind Load.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 870 – 960 17. Inc.powerwave. . Inc.9 Linear vertical 50 < 1. Powerwave. Mechanical Specifications Connector Type Connector Position Dimensions.1 65° 4° 9° >17 > 23 >-17 500 <-150 Typical Horizontal and Vertical 7227. 42 m/s. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1940x256x50mm (6’4”x10”x2”) 11kg (24 lbs) 548 m/s (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6’9”x1’x5”) 13kg (29 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.04 Patterns 870-960 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. Powerwave Technologies.3.com ©Copyright September 2003. Frontal. Contact your Powerwave representative for complete performance data. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. @2x43dBm (dBc) All specifications are subject to change without notice. Inc. 11. State-of-the-art patch technology allows the antenna’s characteristic flat design. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . Made from corrosionresistant aluminum and PVC.33.6 m vertical polarized FET Antenna Part Number: 7228.4168. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.0 dBi / 15.03.9 dBd Electrical Downtilt: 0º Connector Type: N female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. lasting service even in the most demanding environments. This makes it an ideal choice for built-up areas. 7228.00 Single Band Urban Antenna 65° 2.13 Horizontal Beamwidth: 65° Gain: 18. whether domestic or commercial. 03 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. @2x43dBm (dBc) All specifications are subject to change without notice. Mechanical Specifications Connector Type Connector Position Dimensions. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.5° >19 > 23 >-20 500 <-150 Typical Horizontal and Vertical 7228. . The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 1801 East St. Andrew Place Santa Ana. HxWxD Weight Including Bracket Wind Load.3. All Rights reserved. Powerwave Technologies. 42 m/s.com ©Copyright September 2003.powerwave. Powerwave Technologies.1 65° 0° 6. Inc. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. Frontal. Powerwave.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 18.9 Linear vertical 50 < 1. Contact your Powerwave representative for complete performance data. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08124 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.0 / 15. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 N female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 17kg (379 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. Inc. 11.14 Horizontal Beamwidth: 65° Gain: 18.00 Single Band Urban Antenna 65° 2. lasting service even in the most demanding environments.4168.0 dBi / 15. State-of-the-art patch technology allows the antenna’s characteristic flat design.04.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.33. This makes it an ideal choice for built-up areas. Made from corrosionresistant aluminum and PVC. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.6 m vertical polarized FET Antenna Part Number: 7228. Key Benefits: • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . 7228. whether domestic or commercial. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Contact your Powerwave representative for complete performance data. . @2x43dBm (dBc) All specifications are subject to change without notice. Inc.3.1 65° 0° 6.04 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio.com ©Copyright September 2003. Andrew Place Santa Ana.5° >19 > 23 >-20 500 <-150 Typical Horizontal and Vertical 7228. Mechanical Specifications Connector Type Connector Position Dimensions. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08058 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 1801 East St. Powerwave Technologies. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 18. Inc. HxWxD Weight Including Bracket Wind Load. All Rights reserved. Powerwave Technologies. Frontal. Inc. Powerwave.powerwave.0 / 15. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 17kg (379 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.9 Linear vertical 50 < 1. 42 m/s. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.16 Horizontal Beamwidth: 65° Gain: 18. 7228.11.6 m vertical polarized FET Antenna Part Number: 7228.4168.06. State-of-the-art patch technology allows the antenna’s characteristic flat design. Made from corrosionresistant aluminum and PVC. lasting service even in the most demanding environments. Key Benefits: • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .33.00 Single Band Urban Antenna 65° 2. whether domestic or commercial.0 dBi / 15.9 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas. 9 Linear vertical 50 < 1. 42 m/s. All Rights reserved. Inc. @2x43dBm (dBc) All specifications are subject to change without notice.1 65° 6° 6.06 Patterns 870-960 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. 1801 East St. Andrew Place Santa Ana. Frontal. Powerwave.5° >17 > 25 >-20 500 <-150 Typical Horizontal and Vertical 7228. . Contact your Powerwave representative for complete performance data.3.com ©Copyright September 2003.powerwave. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. Powerwave Technologies. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 17kg (379 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 870 – 960 18. Mechanical Specifications Connector Type Connector Position Dimensions. HxWxD Weight Including Bracket Wind Load. Inc.0 / 15. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08059 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 9 dBd Electrical Downtilt: 2º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. whether domestic or commercial. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.18 Horizontal Beamwidth: 65° Gain: 18.00 Single Band Urban Antenna 65° 2.0 dBi / 15. State-of-the-art patch technology allows the antenna’s characteristic flat design.4168. Made from corrosionresistant aluminum and PVC. Key Benefits: • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .11.08. This makes it an ideal choice for built-up areas.33. lasting service even in the most demanding environments.6 m vertical polarized FET Antenna Part Number: 7228. 7228. 9 Linear vertical 50 < 1. 1801 East St. Andrew Place Santa Ana. . 42 m/s. @2x43dBm (dBc) All specifications are subject to change without notice.3. Inc.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 18.com ©Copyright September 2003.1 65° 2° 6. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 17kg (379 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08060 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave. Mechanical Specifications Connector Type Connector Position Dimensions.5° >17 > 25 >-20 500 <-150 Typical Horizontal and Vertical 7228. Frontal. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.powerwave. All Rights reserved.0 / 15. HxWxD Weight Including Bracket Wind Load. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Inc.08 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio. Powerwave Technologies. Contact your Powerwave representative for complete performance data. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. 33.4168. Made from corrosionresistant aluminum and PVC. lasting service even in the most demanding environments. State-of-the-art patch technology allows the antenna’s characteristic flat design. whether domestic or commercial.0 dBi / 9.7 m vertical polarized FET Antenna Part Number: 7230.04 Horizontal Beamwidth: 90° Gain: 12. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.00 Single Band Urban Antenna 90° 0. This makes it an ideal choice for built-up areas. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.11. Andrew Place Santa Ana. Inc.3. Inc. @2x43dBm (dBc) All specifications are subject to change without notice. 42 m/s.1 90° 0° 27° >12 <0. Mechanical Specifications Connector Type Connector Position Dimensions. co-polar (dB) Maximum input power (W) IM3. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.9 Linear vertical 50 < 1. Inc. .powerwave. HxWxD Weight Including Bracket Wind Load.5kg (12 lbs) 123 m/s (28 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 805x216x156mm (2’8”x9’x6”) 6.com ©Copyright September 2003.0 / 9. Frontal.5kg (14. Contact your Powerwave representative for complete performance data. All Rights reserved. Powerwave.04 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Powerwave Technologies. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 12. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 695x160x55mm (2’3”x6”x2”) 5. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08061 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies.3 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.4 > 20 300 <-150 Typical Horizontal and Vertical 7230. 1801 East St. lasting service even in the most demanding environments.4168. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .00 Single Band Urban Antenna 90° 1.3 m vertical polarized FET Antenna Part Number: 7231. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. Made from corrosionresistant aluminum and PVC.0 dBi / 11.11.04 Horizontal Beamwidth: 90° Gain: 14. State-of-the-art patch technology allows the antenna’s characteristic flat design. whether domestic or commercial.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas.33. Powerwave Technologies.5° > 20 500 <-150 Typical Horizontal and Vertical 7231. . CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x160x55mm (4’4”x6”x2”) 7.1 90° 0° 14° >15 <0. Frontal.04 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. @2x43dBm (dBc) All specifications are subject to change without notice. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08062 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.0 / 11. Powerwave.com ©Copyright September 2003.9 Linear vertical 50 < 1. Powerwave Technologies. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.5kg (16. Andrew Place Santa Ana. 1801 East St. Mechanical Specifications Connector Type Connector Position Dimensions. Inc. Contact your Powerwave representative for complete performance data.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 14. co-polar (dB) Maximum input power (W) IM3.3.5 lbs) 233 m/s (52 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x216x156mm (4’8”x9’x6”) 9kg (20 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.powerwave. 42 m/s. HxWxD Weight Including Bracket Wind Load. Inc. All Rights reserved. This makes it an ideal choice for built-up areas. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .9 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. whether domestic or commercial. lasting service even in the most demanding environments.00 Single Band Urban Antenna 90° 1.33. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. Made from corrosionresistant aluminum and PVC.4168.0 dBi / 11. State-of-the-art patch technology allows the antenna’s characteristic flat design.06 Horizontal Beamwidth: 90° Gain: 14.3 m vertical polarized FET Antenna Part Number: 7231.11. Powerwave.powerwave. Contact your Powerwave representative for complete performance data.06 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.5° > 20 500 <-150 Typical Horizontal and Vertical 7231. Inc. .5 lbs) 233 m/s (52 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x216x156mm (4’8”x9’x6”) 9kg (20 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies. All Rights reserved. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08063 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 42 m/s. co-polar (dB) Maximum input power (W) IM3. Frontal.3. Andrew Place Santa Ana. 1801 East St.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 14. HxWxD Weight Including Bracket Wind Load.com ©Copyright September 2003.1 90° 6° 14° >17 <0. Powerwave Technologies.9 Linear vertical 50 < 1.5kg (16. Inc. @2x43dBm (dBc) All specifications are subject to change without notice.0 / 11. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x160x55mm (4’4”x6”x2”) 7. Inc. Mechanical Specifications Connector Type Connector Position Dimensions. 9 m vertical polarized FET Antenna Part Number: 7232.4168.04.11. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.00 Single Band Urban Antenna 90° 1. Made from corrosionresistant aluminum and PVC. whether domestic or commercial.9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.0 dBi / 12. 7232.33. lasting service even in the most demanding environments. State-of-the-art patch technology allows the antenna’s characteristic flat design. This makes it an ideal choice for built-up areas.14 Horizontal Beamwidth: 90° Gain: 15. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . 1 90° 0° 9° >15 <0.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 15.powerwave.5° > 20 >-15 500 <-150 Typical Horizontal and Vertical 7232. 42 m/s. Powerwave. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. HxWxD Weight Including Bracket Wind Load. Frontal. . Powerwave Technologies.0 / 12. Mechanical Specifications Connector Type Connector Position Dimensions. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08064 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Inc. 1801 East St. Powerwave Technologies. Inc.04 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. All Rights reserved. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3.3. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1940x160x55mm (6’4”x6”x2”) 10kg (22 lbs) 342 m/s (77 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x216x156mm (6’9”x9’x6”) 12kg (26. @2x43dBm (dBc) All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Andrew Place Santa Ana.com ©Copyright September 2003.9 Linear vertical 50 < 1. 4168. Made from corrosionresistant aluminum and PVC. whether domestic or commercial.07. This makes it an ideal choice for built-up areas.0 dBi / 12.11.9 m vertical polarized FET Antenna Part Number: 7232.9 dBd Electrical Downtilt: 4º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. State-of-the-art patch technology allows the antenna’s characteristic flat design. 7232.00 Single Band Urban Antenna 90° 1. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .17 Horizontal Beamwidth: 90° Gain: 15.33. lasting service even in the most demanding environments. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. 1 90° 4° 9° >15 <0. Mechanical Specifications Connector Type Connector Position Dimensions. co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3. HxWxD Weight Including Bracket Wind Load. Inc.07 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Contact your Powerwave representative for complete performance data. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 1801 East St. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Powerwave. 42 m/s. @2x43dBm (dBc) All specifications are subject to change without notice. Powerwave Technologies. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 1940x160x55mm (6’4”x6”x2”) 10kg (22 lbs) 342 m/s (77 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x216x156mm (6’9”x9’x6”) 12kg (26.0 / 12.3.5 lbs) D031-08065 Rev A Corporate Headquarters Powerwave Technologies. .powerwave.5° > 20 >-15 500 <-150 Typical Horizontal and Vertical 7232. Andrew Place Santa Ana. Powerwave Technologies. Inc. All Rights reserved.9 Linear vertical 50 < 1.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Frontal. Inc.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 15. This makes it an ideal choice for built-up areas. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable.14 Horizontal Beamwidth: 90° Gain: 16.4168. Key Benefits: • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service .33.04.4 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.11. Made from corrosionresistant aluminum and PVC. State-of-the-art patch technology allows the antenna’s characteristic flat design.00 Single Band Urban Antenna 90° 2.5 dBi / 14. 7233. whether domestic or commercial.6 m vertical polarized FET Antenna Part Number: 7233. lasting service even in the most demanding environments. 3° > 20 500 <-150 Typical Horizontal and Vertical 7233.5 lbs) 455 m/s (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (8’10”x9’x6”) 15kg (33 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x160x55mm (8’6”x6”x2”) 12kg (26. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.3. co-polar (dB) Maximum input power (W) IM3.com ©Copyright September 2003. Powerwave Technologies. Powerwave Technologies. .4 Linear vertical 50 < 1.04 Patterns 870-960 MHz Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Andrew Place Santa Ana. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Contact your Powerwave representative for complete performance data. Frontal. HxWxD Weight Including Bracket Wind Load.5 / 14.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) 870 – 960 16. 1801 East St. Inc. 42 m/s. @2x43dBm (dBc) All specifications are subject to change without notice. Powerwave.1 90° 0° 6. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08066 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. All Rights reserved. Inc.5° >17 <0. Mechanical Specifications Connector Type Connector Position Dimensions.powerwave. lasting service even in the most demanding environments.33.5 dBi / 14.00 Single Band Urban Antenna 90° 2.16 Horizontal Beamwidth: 90° Gain: 16.6 m vertical polarized FET Antenna Part Number: 7233.4168.11.4 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design.06. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service . whether domestic or commercial. its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable. This makes it an ideal choice for built-up areas. Made from corrosionresistant aluminum and PVC. 7233. State-of-the-art patch technology allows the antenna’s characteristic flat design. Powerwave Technologies. Powerwave. @2x43dBm (dBc) All specifications are subject to change without notice.06 Patterns 870-960 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Inc. Inc.5° >17 <0.com ©Copyright September 2003. 1801 East St. All Rights reserved.1 90° 6° 6. Andrew Place Santa Ana. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x160x55mm (8’6”x6”x2”) 12kg (26. Frontal. .3° > 20 500 <-150 Typical Horizontal and Vertical 7233.4 Linear vertical 50 < 1. Mechanical Specifications Connector Type Connector Position Dimensions. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc.5 / 14. 42 m/s. Powerwave Technologies. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. HxWxD Weight Including Bracket Wind Load.3. Contact your Powerwave representative for complete performance data.powerwave.5 lbs) 455 m/s (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (8’10”x9’x6”) 15kg (33 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 870 – 960 16. co-polar (dB) Maximum input power (W) IM3. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08067 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 4168.11.33.00 Single Band Urban Antenna 90° 2.6 m vertical polarized FET Antenna Part Number: 7233.08, 7233.18 Horizontal Beamwidth: 90° Gain: 16.5 dBi / 14.4 dBd Electrical Downtilt: 2º Connector Type: 7/16 DIN female 870-960 MHz The Powerwave® Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antenna’s characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments. Key Benefits • Market Leading Performance • Vertical Polarization • Light Weight • Reliable Lasting Service Single Band Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) 870 – 960 16.5 / 14.4 Linear vertical 50 < 1.3.1 90° 2° 6.5° >17 <0.3° > 20 500 <-150 Typical Horizontal and Vertical 7233.08 Patterns 870-960 MHz Polarization Nominal Impedance (Ohm) VSWR Horizontal –3 dB beamwidth Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc) All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x160x55mm (8’6”x6”x2”) 12kg (26.5 lbs) 455 m/s (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (8’10”x9’x6”) 15kg (33 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-8068 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ©Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Broadband Antenna 65° 1.4 m x-polarized MET Antenna Part Number: 7471.00 Horizontal Beamwidth: 65o Gain: 14.5dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. Key Benefits: • Market Leading Performance • Reliable Design • Light Weight Broadband Antenna Electrical Specifications Frequency band (MHz) Gain, ± 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs, 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, ±60° (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) < -25 >25 >24 >10 <-150 400 800 300 600 QUALITY AND RELIABILITY 806-896 14.2 Dual linear ±45° 50 1.5:1 30 70±4° <2.0 2° to 12° 14.9±1° > 19,18,17 @2,7,12° MET 1° 880-960 14.7 COVERAGE AND CAPACITY 806-960 MHz 67±4° TECHNOLOGY LEADERSHIP 13.8±0.8° > 19,18,17 @2,7,12° MET < -25 >27 >25 >10 NETWORK OPTIMIZATION All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 Weight With Brackets Weight Without Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 1408x280x125mm (4‘9"x11“x5”) 435 N (98 lbf) 15.8 kg (35 lbs) 12.18 kg (27 lbs) 70 m/s (156mph) DC grounded GRP Light Gray 1550x355x255mm (61"x1’2"x10") 19.9 kg (44lbs) D031-08184 Rev A Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Broadband Antenna 65° 2.0 m x-polarized MET Antenna 806-960 MHz Part Number: 7472.00 Horizontal Beamwidth: 65o Gain: 16.5dBi Electrical Downtilt: Adjustable Connector Type: 7/16 female The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. Key Benefits • Excellent broad- and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light, slim and robust design Broadband Antenna Electrical Specifications Frequency band (MHz) Gain, ± 0.5 (dBi) Polarization 806-896 16.0 Dual linear ±45° 50 1.4:1 30 65±5° <2.0 0° to 7.5° 9.5±0.6° > 20,17,15 @0,4,7° MET 0.5° < -18 >30 >25 >11 <-150 400 800 300 600 QUALITY AND RELIABILITY 880-960 16.5 COVERAGE AND CAPACITY 806-960 MHz Nominal Impedance (Ohm) VSWR , 806-960MHz Isolation between inputs, 806-960MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, ±60° (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 65±5° TECHNOLOGY LEADERSHIP 9±0.5° > 20,17,15 @0,4,7° MET < -18 >30 >25 >11 NETWORK OPTIMIZATION All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 Weight With Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size 7/16 DIN female Bottom 2033x280x125mm (6‘8"x11“x5”) 828 N (141 lbf) 18 kg (39,7 lbs) 70m/s (156mph) DC grounded GRP Light Gray 2175x355x255mm (7‘2"x1’2"x10") D031-08185 Rev A Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. 6 m x-polarized MET Antenna 806-960 MHz Part Number: 7473. isolation and cross polarization discrimination.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. slim and robust design . typical of Powerwave antennas. The design ensures the highest possible diversity gain.Broadband Antenna 65° 2. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. Key Benefits • Excellent broad. making this an excellent choice for optimal cell planning. ensures maximum efficiency as well as stable pattern over the entire frequency range. Its slim design and sophisticated electrical performance.00 Horizontal Beamwidth: 65o Gain: 18dBi Electrical Downtilt: Adjustable Connector Type: 7/16 female The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. Special attention has been paid to ensure antenna pattern peak performance. This design relies on leading-edge patch technology fed via a micro strip PCB network. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Inc.3° < -18 >30 >25 >11 <-150 300 600 QUALITY AND RELIABILITY 806-896 17. 806-960MHz Isolation between inputs.3±0. 150 m/s Cd=1 (N) Weight With Brackets Survival Wind Speed (m/s) Lightning Protection Radome Material Radome Color Packing Size 7/16 DIN female Bottom 2580x280x125mm (8‘6"x11“x5”) 868 (195 lbf) 21 kg (46.2. Andrew Place Santa Ana.15 @0.Horizontal plane. ± 0. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4:1 30 65±5° <2. Powerwave Technologies. Mechanical Specifications Connector Type Connector Position Dimensions.0±0.17. ±60° (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. 2Tx@43dBm (dBc) Power Handling. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.0 COVERAGE AND CAPACITY 806-960 MHz 65±5° TECHNOLOGY LEADERSHIP 7. Frontal.4° > 20.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.0 0° to 5. Contact factory for complete performance data.powerwave. HxWxD Wind Load.4° > 20.15 @0.5° MET 0. Average per input (W) Power Handling.3 lbs) 70 (156mph) DC grounded GRP Light Gray 2725x355x255mm (8‘11"x1’2"x10") D031-08186 Rev A Corporate Headquarters Powerwave Technologies.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR .5° MET < -18 >30 >25 >11 NETWORK OPTIMIZATION All specifications are subject to change without notice. Powerwave Technologies.5 Dual linear ±45° 50 1.5° 880-960 18.Broadband Antenna Electrical Specifications Frequency band (MHz) Gain.2. 1801 East St. Average total (W) 400 800 7. 806-960MHz (dB) Horizontal -3 dB beamwidth Tracking. Inc. All Rights reserved. .17. Powerwave. 4 m x-polarized FET Antenna Part Number: 7476. isolation and cross polarization discrimination.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. This design relies on leading-edge patch technology fed via a micro strip PCB network. Key Benefits • Excellent broad. typical of Powerwave antennas. Its slim design and sophisticated electrical performance.33. The design ensures the highest possible diversity gain. slim and robust design . Special attention has been paid to ensure antenna pattern peak performance.00 Low Broadband Antenna 650 1.4168. making this an excellent choice for optimal cell planning.9dBd Electrical Downtilt: 0° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations.11. ensures maximum efficiency as well as stable pattern over the entire frequency range.00 Horizontal Beamwidth: Gain: 15dBi / 12. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. Powerwave. ± 0.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain.8° > 19 806-896 14.8±0. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs. Inc. Powerwave Technologies. Frontal. Andrew Place Santa Ana. Contact your Powerwave representative for complete performance data. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.9±1° > 19 1° < -25 >30 >25 >12 Typical Horizontal and Vertical 7476. HxWxD Weight with Brackets Wind Load.00 Patterns 66±4° <1. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression.9 806-960 MHz All specifications are subject to change without notice. Inc. 1801 East St.powerwave.0 0° 13. Inc. @2x43dBm (dBc) Power Handling.com 2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 401 N (90 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.7/12. Average total (W) < -25 >30 >25 >12 <-150 400 800 300 600 14. Mechanical Specifications Connector Type Connector Position Dimensions. . The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4:1 30 64±4° 880-960 15. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08163 Rev A ©Copyright September 2003. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Average per input (W) Power Handling.Horizontal plane. Powerwave Technologies.0/12.6 Dual slant ±45° 50 1. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking. All Rights reserved. 00 Low Broadband Antenna 650 1. Key Benefits • Excellent broad. The design ensures the highest possible diversity gain.33.9dBd Electrical Downtilt: 2° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations.11. slim and robust design . ensures maximum efficiency as well as stable pattern over the entire frequency range. Special attention has been paid to ensure antenna pattern peak performance. making this an excellent choice for optimal cell planning. This design relies on leading-edge patch technology fed via a micro strip PCB network. Its slim design and sophisticated electrical performance.4168. isolation and cross polarization discrimination.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.4 m x-polarized FET Antenna Part Number: 7476. typical of Powerwave antennas.02 Horizontal Beamwidth: Gain: 15dBi / 12. Andrew Place Santa Ana. HxWxD Weight with Brackets Wind Load. .02 Patterns 66±4° <1. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression.powerwave.0/12. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08164 Rev A ©Copyright September 2003. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. Powerwave.6 Dual slant ±45° 50 1. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.8±0. Powerwave Technologies.9 806-960 MHz All specifications are subject to change without notice.0 2° 13.4:1 30 64±4° 880-960 15. Powerwave Technologies. @2x43dBm (dBc) Power Handling. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. All Rights reserved.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs. Contact your Powerwave representative for complete performance data. Frontal. ± 0.com 2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 401N (90 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Average per input (W) Power Handling.9±1° > 19.7/12. 1° < -25 >30 >25 >12 Typical Horizontal and Vertical 7476. Inc. Inc.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. 1801 East St. Average total (W) < -25 >30 >25 >12 <-150 400 800 300 600 14. Mechanical Specifications Connector Type Connector Position Dimensions.8° > 19 806-896 14.Horizontal plane. 33. This design relies on leading-edge patch technology fed via a micro strip PCB network. ensures maximum efficiency as well as stable pattern over the entire frequency range.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. Its slim design and sophisticated electrical performance.06 Horizontal Beamwidth: Gain: 15dBi / 12.9dBd Electrical Downtilt: 6° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. isolation and cross polarization discrimination.4168.4 m x-polarized FET Antenna Part Number: 7476. typical of Powerwave antennas. Key Benefits • Excellent broad. The design ensures the highest possible diversity gain. Special attention has been paid to ensure antenna pattern peak performance.00 Low Broadband Antenna 650 1. making this an excellent choice for optimal cell planning. slim and robust design .11. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. ± 0.8±0. Mechanical Specifications Connector Type Connector Position Dimensions.8° > 19 806-896 14.powerwave.7/12.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs. Andrew Place Santa Ana. Average total (W) < -25 >30 >25 >12 <-150 400 800 300 600 14.4:1 30 64±4° 880-960 15.com 2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 401N (90 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.6 Dual slant ±45° 50 1. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking. . Inc. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.06 Patterns 66±4° <1. 1° < -25 >30 >25 >12 Typical Horizontal and Vertical 7476. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.9 806-960 MHz All specifications are subject to change without notice. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave. Powerwave Technologies. All Rights reserved. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Powerwave Technologies. 1801 East St.0/12.0 6° 13. Frontal. Average per input (W) Power Handling.Horizontal plane. Inc. Inc. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08165 Rev A ©Copyright September 2003.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain. @2x43dBm (dBc) Power Handling. HxWxD Weight with Brackets Wind Load.9±1° > 19. Contact your Powerwave representative for complete performance data. and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. This design relies on leading-edge patch technology fed via a micro strip PCB network. typical of Powerwave antennas.00 Horizontal Beamwidth: Gain: 16. slim and robust design . ensures maximum efficiency as well as stable pattern over the entire frequency range. isolation and cross polarization discrimination.33. Special attention has been paid to ensure antenna pattern peak performance. Its slim design and sophisticated electrical performance.00 Low Broadband Antenna 650 2.4dBd Electrical Downtilt: 0° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations.11. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. The design ensures the highest possible diversity gain. Key Benefits • Excellent broad. making this an excellent choice for optimal cell planning.4168.0 m x-polarized FET Antenna Part Number: 7477.5dBi / 14. 1801 East St. Powerwave. 0.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain. Frontal. @2x43dBm (dBc) Power Handling. Powerwave Technologies.5/14. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. .com ©Copyright September 2003. Average per input (W) Power Handling. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3.4 806-960 MHz All specifications are subject to change without notice. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression.9 Dual slant ±45° 50 1.Horizontal plane. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking. HxWxD Weight with Brackets Wind Load. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08166 Rev A Corporate Headquarters Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. All Rights reserved.6° > 20. Inc.00 Patterns 66±4° <1.0/13. Contact your Powerwave representative for complete performance data.0 0° 9±0. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2033x280x125mm (6‘8"x11“x5”) 18 kg (39. Powerwave Technologies.4:1 30 64±4° 880-960 16.5±0. Andrew Place Santa Ana. Mechanical Specifications Connector Type Connector Position Dimensions.7 lbs) 628 N (141 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2175x355x255mm (7‘2"x1’2"x10") Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5° < -18 >30 >25 >12 Typical Horizontal and Vertical 7477. Inc.5° > 20 806-896 16.powerwave. ± 0. Average total (W) < -18 >30 >25 >12 <-150 400 800 300 600 9.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 00 Low Broadband Antenna 650 2. making this an excellent choice for optimal cell planning.4dBd Electrical Downtilt: 2° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations.0 m x-polarized FET Antenna Part Number: 7477. isolation and cross polarization discrimination.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. slim and robust design . The design ensures the highest possible diversity gain. Special attention has been paid to ensure antenna pattern peak performance.02 Horizontal Beamwidth: Gain: 16. This design relies on leading-edge patch technology fed via a micro strip PCB network. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. typical of Powerwave antennas. Key Benefits • Excellent broad.33.4168.5dBi / 14.11. ensures maximum efficiency as well as stable pattern over the entire frequency range. Its slim design and sophisticated electrical performance. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. Andrew Place Santa Ana. Inc. HxWxD Weight with Brackets Wind Load. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.4:1 30 64±4° 880-960 16.02 Patterns 66±4° <2.4 806-960 MHz All specifications are subject to change without notice. Powerwave Technologies. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs.5° > 20 806-896 16. .6° > 20. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08167 Rev A Corporate Headquarters Powerwave Technologies.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain.9 Dual slant ±45° 50 1. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 0. Inc. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2033x280x125mm (6‘8"x11“x5”) 18 kg (39. Inc. Average total (W) < -18 >30 >25 >12 <-150 400 800 300 600 9. 1801 East St. Powerwave.com ©Copyright September 2003.powerwave.Horizontal plane.5° < -18 >30 >25 >12 Typical Horizontal and Vertical 7477. @2x43dBm (dBc) Power Handling. Average per input (W) Power Handling. All Rights reserved. Powerwave Technologies.0/13. Mechanical Specifications Connector Type Connector Position Dimensions. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking. Frontal.7 lbs) 628N (141 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2175x355x255mm (7‘2"x1’2"x10") Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5/14. Contact your Powerwave representative for complete performance data.5±0.0 2° 9±0. ± 0. 4168.4dBd Electrical Downtilt: 6° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. ensures maximum efficiency as well as stable pattern over the entire frequency range.0 m x-polarized FET Antenna Part Number: 7477.5dBi / 14.11. This design relies on leading-edge patch technology fed via a micro strip PCB network. slim and robust design .00 Low Broadband Antenna 650 2. Its slim design and sophisticated electrical performance. typical of Powerwave antennas. Special attention has been paid to ensure antenna pattern peak performance. making this an excellent choice for optimal cell planning. The design ensures the highest possible diversity gain.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light.33. Key Benefits • Excellent broad. isolation and cross polarization discrimination. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.06 Horizontal Beamwidth: Gain: 16. Horizontal plane.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain.5° < -18 >30 >25 >12 Typical Horizontal and Vertical 7477.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs.0/13. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Andrew Place Santa Ana.4:1 30 64±4° 806-960 MHz All specifications are subject to change without notice.5/14.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. HxWxD Weight with Brackets Wind Load. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking. Contact your Powerwave representative for complete performance data. Powerwave Technologies. Frontal. All Rights reserved. 1801 East St.4 Dual slant ±45° 50 1.6° > 20. ± 0. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression. @2x43dBm (dBc) Power Handling. Inc. Inc. Average per input (W) Power Handling.9 16. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. . 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2033x280x125mm (6‘8"x11“x5”) 18 kg (39. Powerwave.7 lbs) 628N (141 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2175x355x255mm (7‘2"x1’2"x10") D031-08168 Rev A Corporate Headquarters Powerwave Technologies. 0. Powerwave Technologies.06 Patterns 66±4° <1. Average total (W) < -18 >30 >25 >12 <-150 400 800 300 600 9. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.0 6° 9±0. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3.5±0.5° > 20 806-896 880-960 16. Mechanical Specifications Connector Type Connector Position Dimensions. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Inc. making this an excellent choice for optimal cell planning.9dBd Electrical Downtilt: 0° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain.11. Key Benefits • Excellent broad.00 Horizontal Beamwidth: Gain: 18dBi / 15.33.00 Low Broadband Antenna 650 2. isolation and cross polarization discrimination. ensures maximum efficiency as well as stable pattern over the entire frequency range. slim and robust design .and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light.6 m x-polarized FET Antenna Part Number: 7478. Special attention has been paid to ensure antenna pattern peak performance. Its slim design and sophisticated electrical performance. This design relies on leading-edge patch technology fed via a micro strip PCB network. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. typical of Powerwave antennas.4168. Contact your Powerwave representative for complete performance data.4° > 20 806-896 17. ± 0. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08169 Rev A Corporate Headquarters Powerwave Technologies.4:1 30 64±4° 880-960 18/15.4° > 20. Mechanical Specifications Connector Type Connector Position Dimensions. HxWxD Weight with Brackets Wind Load. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2580x280x125mm (8‘6"x11“x5”) 21 kg (46. Andrew Place Santa Ana. 1801 East St.3±0. @2x43dBm (dBc) Power Handling.com ©Copyright September 2003. Powerwave.4 Dual slant ±45° 50 1.0 0° 7. Powerwave Technologies. 0. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs.powerwave.0±0.3 lbs) 796N (179 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2725x355x255mm (8‘11"x1’2"x10") Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.9 806-960 MHz All specifications are subject to change without notice.5/15. Average total (W) < -18 >30 >25 >12 <-150 400 800 300 600 7. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.00 Patterns 66±4° <1. Inc. Powerwave Technologies. . total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. Frontal. Inc.Horizontal plane. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression. Average per input (W) Power Handling. All Rights reserved.3° < -18 >30 >25 >12 Typical Horizontal and Vertical 7478. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. The design ensures the highest possible diversity gain.11.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light.02 Horizontal Beamwidth: Gain: 18dBi / 15. Special attention has been paid to ensure antenna pattern peak performance. slim and robust design . isolation and cross polarization discrimination.33.9dBd Electrical Downtilt: 2° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. ensures maximum efficiency as well as stable pattern over the entire frequency range.4168.6 m x-polarized FET Antenna Part Number: 7478.00 Low Broadband Antenna 650 2. This design relies on leading-edge patch technology fed via a micro strip PCB network. Its slim design and sophisticated electrical performance. making this an excellent choice for optimal cell planning. Key Benefits • Excellent broad. typical of Powerwave antennas. .0±0.com ©Copyright September 2003. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08170 Rev A Corporate Headquarters Powerwave Technologies.3° < -18 >30 >25 >12 Typical Horizontal and Vertical 7478. Powerwave Technologies. Inc.4 Dual slant ±45° 50 1. Average total (W) < -18 >30 >25 >12 <-150 400 800 300 600 7. Inc. ±60° (dB) Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression.4:1 30 64±4° 880-960 18/15.3 lbs) 796N (179 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2725x355x255mm (8‘11"x1’2"x10") Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.3±0. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking.0 2° 7.5/15.02 Patterns 66±4° <1. Mechanical Specifications Connector Type Connector Position Dimensions.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs. Andrew Place Santa Ana. 1801 East St. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. Powerwave.4° > 20 806-896 17. Contact your Powerwave representative for complete performance data.Horizontal plane.powerwave. All Rights reserved. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2580x280x125mm (8‘6"x11“x5”) 21 kg (46. HxWxD Weight with Brackets Wind Load. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain.9 806-960 MHz All specifications are subject to change without notice. Average per input (W) Power Handling. 0. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. ± 0. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Powerwave Technologies. Frontal.4° > 20. @2x43dBm (dBc) Power Handling. 06 Horizontal Beamwidth: Gain: 18dBi / 15. Key Benefits • Excellent broad. isolation and cross polarization discrimination. making this an excellent choice for optimal cell planning. Special attention has been paid to ensure antenna pattern peak performance.00 Low Broadband Antenna 650 2. typical of Powerwave antennas. This design relies on leading-edge patch technology fed via a micro strip PCB network. Its slim design and sophisticated electrical performance.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light.33. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect. The design ensures the highest possible diversity gain.9dBd Electrical Downtilt: 6° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations.4168. slim and robust design .6 m x-polarized FET Antenna Part Number: 7478.11. ensures maximum efficiency as well as stable pattern over the entire frequency range. ± 0.4° > 20 806-896 17. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking.3° < -18 >30 >25 >12 <-150 400 800 300 600 < -18 >30 >25 >12 Typical Horizontal and Vertical 7478. Powerwave. Inc.0 6° 7.3±0. 0. Inc.com ©Copyright September 2003. Frontal. Average total (W) All specifications are subject to change without notice. 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2580x280x125mm (8‘6"x11“x5”) 21 kg (46.3 lbs) 796N (179 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2725x355x255mm (8‘11"x1’2"x10") Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. All Rights reserved. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3.4° > 20. Mechanical Specifications Connector Type Connector Position Dimensions.5/15.Low Broadband Antenna Electrical Specifications Frequency band (MHz) Gain. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Powerwave Technologies.5 (dBi) / (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4:1 30 64±4° 880-960 18/15. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 1801 East St.9 806-960 MHz Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression. .Horizontal plane. Contact factory for complete performance data.powerwave. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08171 Rev A Corporate Headquarters Powerwave Technologies. HxWxD Weight with Brackets Wind Load. ±60° (dB) 66±4° <1. Average per input (W) Power Handling.06 Patterns 7. Inc. Andrew Place Santa Ana.0±0. @2x43dBm (dBc) Power Handling.4 Dual slant ±45° 50 1. isolation and cross polarization discrimination.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN female The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. making this an excellent choice for optimal cell planning. Special attention has been paid to ensure antenna pattern peak performance.00 Horizontal Beamwidth: 90° Gain: 13.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. Choose the optional MET function that allows you to field-adjust the electrical tilt from 0° to the first null at horizon (16°) for optimum roll-off effect.Broadband Antenna 90° 1. slim and robust design . ensures maximum efficiency as well as stable pattern over the entire frequency range. Key Benefits • Excellent broad. typical of Powerwave antennas. The design ensures the highest possible diversity gain. Its slim design and sophisticated electrical performance.3 m x-polarized MET Antenna 806 – 960 MHz Part Number: 7481. This design relies on leading-edge patch technology fed via a micro strip PCB network. Mechanical Specifications Connector Type Connector Position Dimensions. CA 92705 USA 2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 476 N (107 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies. Powerwave. 3rd order. Andrew Place Santa Ana. Inc.Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 . HxWxD Weight with Brackets Wind Load. 1801 East St. 2Tx@43dBm (dBc) All specifications are subject to change without notice. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08183 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. All Rights reserved. Inc. 42 m/s mph Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. . co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM.4:1 > 30 90° 15° 2° to 12° >27 >18 600 -150 Typical Horizontal and Vertical 7481.00 Patterns 806-960 MHz Polarization Gain (dBi) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio.powerwave. Contact your Powerwave representative for complete performance data. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc.com ©Copyright March 2005. Powerwave Technologies.5 50 < 1.960 Dual linear ± 45° 13. Frontal. slim and robust design . ensures maximum efficiency as well as stable pattern over the entire frequency range.Broadband Antenna 90° 2. Special attention has been paid to ensure antenna pattern peak performance. typical of Powerwave antennas.0 m x-polarized MET Antenna 806 – 960 MHz Part Number: 7482. Its slim design and sophisticated electrical performance. Key Benefits • Excellent broad. Choose the optional MET function that allows you to field-adjust the electrical tilt from 0° to the first null at horizon (10°) for optimum roll-off effect. making this an excellent choice for optimal cell planning. This design relies on leading-edge patch technology fed via a micro strip PCB network. isolation and cross polarization discrimination.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. The design ensures the highest possible diversity gain.00 Horizontal Beamwidth: 90o Gain: 15dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN female The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. HxWxD Weight With Brackets Wind Load.5° >27 >18 600 -150 Typical Horizontal and Vertical 7482. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 2Tx@43dBm (dBi) 806 . 3rd order. Andrew Place Santa Ana.4:1 > 30 90° 10° 0° to 7. Powerwave Technologies.Broadband Antenna Electrical Specifications (Preliminary) 806-960 MHz Frequency Range (MHz) Polarization Gain (dBi) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio.com ©Copyright March 2005. CA 92705 USA 2 x 7/16 DIN female Bottom 2000x280x125mm (6‘7"x11"x5") 15 kg (33 lbs) 476 N (107 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2225mmx355mmx255mm (7‘4"x14"x10") 16 kg (35 lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave. 100 mph (44. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM. Inc. Contact factory for complete performance data.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Frontal. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08187 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. . Powerwave Technologies.powerwave.960 Dual linear ± 45° 15 50 < 1.00 Patterns All specifications are subject to change without notice. Inc. 1801 East St. All Rights reserved. Inc. Mechanical Specifications Connector Type Connector Position Dimensions. 00 Horizontal Beamwidth: 90o Gain: 16. ensures maximum efficiency as well as stable pattern over the entire frequency range.Low Broadband Antenna 90° 2. making this an excellent choice for optimal cell planning. Special attention has been paid to ensure antenna pattern peak performance.6 m x-polarized MET Antenna 806-960 MHz Part Number: 7483.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. This design relies on leading-edge patch technology fed via a micro strip PCB network. slim and robust design . Choose the optional MET function that allows you to field-adjust the electrical tilt from 0° to the first null at horizon (7°) for optimum roll-off effect.5dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN female The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. Key Benefits • Excellent broad. isolation and cross polarization discrimination. The design ensures the highest possible diversity gain. typical of Powerwave antennas. Its slim design and sophisticated electrical performance. Frontal. Powerwave Technologies. 1801 East St. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08188 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Mechanical Specifications Connector Type Connector Position Dimensions. Inc. CA 92705 USA 2 x 7/16 DIN female Bottom 2630x280x125mm (8‘8"x11"x5") 20. Contact your Powerwave representative for complete performance data.5 lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.00 Patterns QUALITY AND RELIABILITY NETWORK OPTIMIZATION TECHNOLOGY LEADERSHIP COVERAGE AND CAPACITY 806-960 MHz Polarization Gain (dBi) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio. All Rights reserved.5 50 < 1. 100 Mph(44.Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 . Powerwave.3 lbs) 476 N (107 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2830x355x255mm (9‘4"x1’2"x10") 21.4:1 > 30 90° 7° 0° to 5. . 2Tx@43dBm (dBc) All specifications are subject to change without notice.5° >30 >18 600 <-150 Typical Horizontal and Vertical 7483.960 Dual linear ± 45° 16.com ©Copyright March 2005. Inc. 3rd order.6 kg (45. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM.6 kg (47.powerwave. HxWxD Weight With Brackets Wind Load. Inc. Andrew Place Santa Ana. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. 11. making this an excellent choice for optimal cell planning.00 Horizontal Beamwidth: 90o Gain: 13. Special attention has been paid to ensure antenna pattern peak performance.4168. typical of Powerwave antennas. Key Benefits • Excellent broad.00 Low Broadband Antenna 900 1.4 m x-polarized FET Antenna Part Number: 7486. This design relies on leading-edge patch technology fed via a micro strip PCB network. The design ensures the highest possible diversity gain.5dBi / 11.4dBd Electrical Downtilt: 00 Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. ensures maximum efficiency as well as stable pattern over the entire frequency range.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. Its slim design and sophisticated electrical performance.33. isolation and cross polarization discrimination. slim and robust design . Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 . Powerwave Technologies. All Rights reserved.4 50 < 1. Frontal. Mechanical Specifications Connector Type Connector Position Dimensions. CA 92705 USA 2 x 7/16 DIN female Bottom 1330x280x125mm (8‘8"x11"x5") 14 kg 411 N (92 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 1530x355x255mm (9‘4"x1’2"x10") 15 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Andrew Place Santa Ana. 3rd order. Powerwave. Contact your Powerwave representative for complete performance data.5 / 11. . 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.powerwave.com ©Copyright September 2003. Inc.00 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio. Powerwave Technologies. HxWxD Weight Brackets Wind Load. 1801 East St. Inc. Inc. @2x43dBm (dBc) All specifications are subject to change without notice. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08172 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.4:1 > 30 90° 16° 0° >30 >20 600 <-150 Typical Horizontal and Vertical 7486. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM.960 Dual slant ± 45° 13. isolation and cross polarization discrimination.00 Low Broadband Antenna 900 1.33. Key Benefits • Excellent broad. typical of Powerwave antennas. ensures maximum efficiency as well as stable pattern over the entire frequency range.4 m x-polarized FET Antenna Part Number: 7486. The design ensures the highest possible diversity gain.5dBi / 11.02 Horizontal Beamwidth: 90o Gain: 13. slim and robust design .11. Its slim design and sophisticated electrical performance.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. making this an excellent choice for optimal cell planning.4dBd Electrical Downtilt: 20 Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. This design relies on leading-edge patch technology fed via a micro strip PCB network.4168. Special attention has been paid to ensure antenna pattern peak performance. 3rd order.5 / 11. All Rights reserved. Contact your Powerwave representative for complete performance data. . Powerwave.com ©Copyright September 2003. Powerwave Technologies.960 Dual slant ± 45° 13. 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08173 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Andrew Place Santa Ana. CA 92705 USA 2 x 7/16 DIN female Bottom 1330x280x125mm (8‘8"x11"x5") 14 kg 411 N (92 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 1530x355x255mm (9‘4"x1’2"x10") 15 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 1801 East St. Frontal.02 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio. Inc. Inc. HxWxD Weight Brackets Wind Load. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM.4 50 < 1. Inc.powerwave. Powerwave Technologies.Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 . Mechanical Specifications Connector Type Connector Position Dimensions.4:1 > 30 90° 15° 2° >30 >20 600 <-150 Typical Horizontal and Vertical 7486. @2x43dBm (dBc) All specifications are subject to change without notice. and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. Its slim design and sophisticated electrical performance. Special attention has been paid to ensure antenna pattern peak performance.00 Low Broadband Antenna 900 1. Key Benefits • Excellent broad.33. making this an excellent choice for optimal cell planning. slim and robust design . typical of Powerwave antennas. The design ensures the highest possible diversity gain.06 Horizontal Beamwidth: 90o Gain: 13. ensures maximum efficiency as well as stable pattern over the entire frequency range. isolation and cross polarization discrimination. This design relies on leading-edge patch technology fed via a micro strip PCB network.4 m x-polarized FET Antenna Part Number: 7486.4dBd Electrical Downtilt: 60 Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations.5dBi / 11.4168.11. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.960 Dual slant ± 45° 13. Mechanical Specifications Connector Type Connector Position Dimensions. All Rights reserved.5 / 11.4:1 > 30 90° 16° 6° >30 >20 600 <-150 Typical Horizontal and Vertical 7487.powerwave. Powerwave Technologies. Powerwave. 3rd order. Inc. HxWxD Weight Brackets Wind Load. Inc. CA 92705 USA 2 x 7/16 DIN female Bottom 1330x280x125mm (8‘8"x11"x5") 14 kg 411 N (92 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 1530x355x255mm (9‘4"x1’2"x10") 15 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.06 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio. . 1801 East St. 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Inc. Andrew Place Santa Ana. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM.Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 . Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08174 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.4 50 < 1. Contact your Powerwave representative for complete performance data. Frontal. @2x43dBm (dBc) All specifications are subject to change without notice.com ©Copyright September 2003. Powerwave Technologies. 0 m x-polarized FET Antenna Part Number: 7487. isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance.00 Low Broadband Antenna 900 2. This design relies on leading-edge patch technology fed via a micro strip PCB network. The design ensures the highest possible diversity gain.00 Horizontal Beamwidth: 90o Gain: 15dBi / 12.11. typical of Powerwave antennas.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. slim and robust design .9dBd Electrical Downtilt: 00 Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. Key Benefits • Excellent broad.4168. Special attention has been paid to ensure antenna pattern peak performance. ensures maximum efficiency as well as stable pattern over the entire frequency range.33. making this an excellent choice for optimal cell planning. Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 - 960 Dual slant ± 45° 15 / 12.9 50 < 1.4:1 > 30 90° 10° 0° >30 >21 600 <-150 Typical Horizontal and Vertical 7487.00 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc) All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA 2 x 7/16 DIN female Bottom 2080x280x125mm (8‘8"x11"x5") 16 kg 642 N (144 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2280x355x255mm (9‘4"x1’2"x10") 17 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08175 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ©Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. 4168.11.33.00 Low Broadband Antenna 900 2.0 m x-polarized FET Antenna Part Number: 7487.02 Horizontal Beamwidth: 90° Gain: 15dBi / 12.9dBd Electrical Downtilt: 2° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Key Benefits • Excellent broad- and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light, slim and robust design Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 - 960 Dual slant ± 45° 15 / 12.9 50 < 1.4:1 > 30 90° 10° 2° >30 >21 600 <-150 Typical Horizontal and Vertical 7487.02 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc) All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA 2 x 7/16 DIN female Bottom 2080x280x125mm (8‘8"x11"x5") 16 kg 642 N (144 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2280x355x255mm (9‘4"x1’2"x10") 17 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08176 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ©Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. 4168.11.33.00 Low Broadband Antenna 900 2.0 m x-polarized FET Antenna Part Number: 7487.06 Horizontal Beamwidth: 90o Gain: 15dBi / 12.9dBd Electrical Downtilt: 60 Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Key Benefits • Excellent broad- and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light, slim and robust design Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 - 960 Dual slant ± 45° 15 / 12.9 50 < 1.4:1 > 30 90° 10° 6° >30 >21 600 <-150 Typical Horizontal and Vertical 7487.06 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc) All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA 2 x 7/16 DIN female Bottom 2080x280x125mm (8‘8"x11"x5") 16 kg 642 N (144 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2280x355x255mm (9‘4"x1’2"x10") 17 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08177 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ©Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. 4168.11.33.00 Low Broadband Antenna 900 2.6 m x-polarized FET Antenna Part Number: 7488.00 Horizontal Beamwidth: 90o Gain: 16.5dBi / 14.4dBd Electrical Downtilt: 0° Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Key Benefits • Excellent broad- and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light, slim and robust design 5 / 14. Inc. Powerwave Technologies. Mechanical Specifications Connector Type Connector Position Dimensions. 1801 East St. 3rd order.com ©Copyright September 2003. Frontal.Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 . Powerwave Technologies.00 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio.powerwave.4:1 > 30 90° 8° 0° >30 >20 600 <-150 Typical Horizontal and Vertical 7488. CA 92705 USA 2 x 7/16 DIN female Bottom 2600x280x125mm (8‘8"x11"x5") 19 kg 636 N (143 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2800x355x255mm (9‘4"x1’2"x10") 20 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave. 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Contact your Powerwave representative for complete performance data. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. HxWxD Weight Brackets Wind Load. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08178 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. . All Rights reserved. @2x43dBm (dBc) All specifications are subject to change without notice. Inc. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM.960 Dual slant ± 45° 16.4 50 < 1. Andrew Place Santa Ana. Its slim design and sophisticated electrical performance.5dBi / 14.00 Low Broadband Antenna 900 2.4168. The design ensures the highest possible diversity gain.6 m x-polarized FET Antenna Part Number: 7488.4dBd Electrical Downtilt: 20 Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations. ensures maximum efficiency as well as stable pattern over the entire frequency range. typical of Powerwave antennas.33.02 Horizontal Beamwidth: 90o Gain: 16. This design relies on leading-edge patch technology fed via a micro strip PCB network.and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. Key Benefits • Excellent broad. isolation and cross polarization discrimination. slim and robust design . making this an excellent choice for optimal cell planning. Special attention has been paid to ensure antenna pattern peak performance.11. @2x43dBm (dBc) All specifications are subject to change without notice.02 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio.powerwave. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM.4 50 < 1. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08179 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.960 Dual slant ± 45° 16. Mechanical Specifications Connector Type Connector Position Dimensions. HxWxD Weight Brackets Wind Load. All Rights reserved.Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 .4:1 > 30 90° 8° 2° >30 >20 600 <-150 Typical Horizontal and Vertical 7488. Andrew Place Santa Ana. CA 92705 USA 2 x 7/16 DIN female Bottom 2600x280x125mm (8‘8"x11"x5") 19 kg 636 N (143 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2800x355x255mm (9‘4"x1’2"x10") 20 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 1801 East St. Powerwave Technologies. Inc. 3rd order.5 / 14. . Inc. Inc.com ©Copyright September 2003. Frontal. Contact your Powerwave representative for complete performance data. and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. isolation and cross polarization discrimination. The design ensures the highest possible diversity gain.4168.33. ensures maximum efficiency as well as stable pattern over the entire frequency range.4dBd Electrical Downtilt: 60 Connector Type: 7/16 DIN female 806-960 MHz The Powerwave broadband dual polarized antenna is designed with a slant ±45° configuration having equal signal strengths on both polarizations.11. Key Benefits • Excellent broad.5dBi / 14. This design relies on leading-edge patch technology fed via a micro strip PCB network. Its slim design and sophisticated electrical performance. Special attention has been paid to ensure antenna pattern peak performance.6 m x-polarized FET Antenna Part Number: 7488. slim and robust design .00 Low Broadband Antenna 900 2. making this an excellent choice for optimal cell planning.06 Horizontal Beamwidth: 90o Gain: 16. typical of Powerwave antennas. powerwave. 1801 East St.4 50 < 1. Inc. co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM. All Rights reserved. Powerwave. Mechanical Specifications Connector Type Connector Position Dimensions.Low Broadband Antenna Electrical Specifications Frequency Range (MHz) 806 . Inc. Andrew Place Santa Ana. 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Powerwave Technologies. Inc.5 / 14. Frontal. @2x43dBm (dBc) All specifications are subject to change without notice.com ©Copyright September 2003. Contact your Powerwave representative for complete performance data. CA 92705 USA 2 x 7/16 DIN female Bottom 2600x280x125mm (8‘8"x11"x5") 19 kg 636 N (143 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2800x355x255mm (9‘4"x1’2"x10") 20 kg Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.960 Dual slant ± 45° 16. . Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08180 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 3rd order.4:1 > 30 90° 7° 6° >30 >20 600 <-150 Typical Horizontal and Vertical 7488. HxWxD Weight Brackets Wind Load.06 Patterns 806-960 MHz Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio. Powerwave Technologies. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio).4168. thus substantially enhancing system benefits. indepth research and testing.00 Single Band X-Urban Antenna 65º 0.4 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna.03 Horizontal Beamwidth: 65° Gain: 12.33. Powerwave® has produced a variety of designs that ensure the isolation. isolation beam squint and tracking.11. This design ensures minimized intermodulation products. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance . hence the most efficient system performance.7 m X-polarized FET Antenna Part Number: 7216. As a result of thorough.5 dBi / 10. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain. The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. . co-polar (dB) Front-to-back ratio.com ©Copyright September 2003. Inc. Inc. HxWxD Weight Including Bracket Wind Load. 42 m/s. Andrew Place Santa Ana. Mechanical Specifications Connector Type Connector Position Dimensions.1 > 30 65° <1 0° 26 ° > 10 < 0. Contact your Powerwave representative for complete performance data. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. All Rights reserved. Inc. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 660x256x50mm (2'2"x10"x2") 4 kg (8. 1801 East St. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08069 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking.powerwave. Powerwave Technologies.8 lbs) 190N (57 lbf) 55m/s (123 mph) DC grounded PVC Light gray 770x308x121mm (2'6"x1"x5") 5.3. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Frontal.5 / 10.4 Linear slanted 50° < 1.03 Patterns All specifications are subject to change without notice. @2x43dBm (dBc) 880 – 960 12. Powerwave. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.3° >24 >20 >20 250 <-150 880-960 MHz Typical Horizontal and Vertical 7216. Powerwave Technologies.5kg (12 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain.3 m X-polarized FET Antenna Part Number: 7217.11.33.0 dBi / 12. The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage. hence the most efficient system performance.03 Horizontal Beamwidth: 65° Gain: 15. isolation beam squint and tracking.00 Single Band X-Urban Antenna 65º 1. Powerwave® has produced a variety of designs that ensure the isolation. thus substantially enhancing system benefits. As a result of thorough.4168. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio). This design ensures minimized intermodulation products. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance . indepth research and testing.9 dBd Electrical Downtilt: 7º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Inc.com ©Copyright September 2003.9 Linear slanted ± 45° 50 < 1. All Rights reserved. @2x43dBm (dBc) 880 – 960 15. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. 1801 East St. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. . Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.3° >24 >20 >19 500 <-150 Typical Horizontal and Vertical 7217. Contact your Powerwave representative for complete performance data. Inc. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4’4”x10”x2”) 8. Powerwave Technologies. 42 m/s.powerwave.03 Patterns 880-960 MHz All specifications are subject to change without notice.0 / 12. Mechanical Specifications Connector Type Connector Position Dimensions. Powerwave Technologies.3.5kg (18. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08070 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.1 > 30 65° <1 7° 13° > 14 < 0.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. HxWxD Weight Including Bracket Wind Load. Andrew Place Santa Ana.7 lbs) 1320 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4’8”x1’x5”) 10kg (22 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Frontal. co-polar (dB) Front-to-back ratio. 33.5 dBi / 13.00 Single Band X-Urban Antenna 65º 1. hence the most efficient system performance.3 m X-polarized FET Antenna Part Number: 7217. isolation beam squint and tracking.4 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain. indepth research and testing. Powerwave® has produced a variety of designs that ensure the isolation. The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage.04 Horizontal Beamwidth: 65° Gain: 15.11. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio).4168. This design ensures minimized intermodulation products. As a result of thorough. thus substantially enhancing system benefits. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance . 04 Patterns 880-960 MHz All specifications are subject to change without notice. @2x43dBm (dBc) 880 – 960 15. Inc. Inc. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.5kg (18.4 Linear slanted ± 45° 50 < 1. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.5 / 13.com ©Copyright September 2003. HxWxD Weight Including Bracket Wind Load. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08071 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. Contact your Powerwave representative for complete performance data.3° >24 >20 >19 500 <-150 Typical Horizontal and Vertical 7217. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3.powerwave. 42 m/s. All Rights reserved. Inc. Powerwave. Mechanical Specifications Connector Type Connector Position Dimensions.3. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4’4”x10”x2”) 8. Frontal. Andrew Place Santa Ana.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking.1 > 30 65° <1 0° 13° > 14 < 0.7 lbs) 1320 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4’8”x1’x5”) 10kg (22 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. . co-polar (dB) Front-to-back ratio. 1801 East St. Powerwave Technologies. The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance .00 Single Band X-Urban Antenna 65º 1. thus substantially enhancing system benefits. isolation beam squint and tracking. indepth research and testing.33. Powerwave® has produced a variety of designs that ensure the isolation.4 dBd Electrical Downtilt: 9º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. hence the most efficient system performance.11 Horizontal Beamwidth: 65° Gain: 14.4168.01. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio).11. This design ensures minimized intermodulation products. As a result of thorough.5 dBi / 12.3 m X-polarized FET Antenna Part Number: 7217. 7217. Inc. Inc. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1320x256x50mm (4’4”x10”x2”) 8. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08072 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave. Mechanical Specifications Connector Type Connector Position Dimensions.3.1 > 30 65° <1 9° 13° > 14 < 0.5 / 12. @2x43dBm (dBc) 880 – 960 14.4 Linear slanted ± 45° 50 < 1. .com ©Copyright September 2003. All Rights reserved.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. Contact your Powerwave representative for complete performance data.3° >23 >19 >19 500 <-150 Typical Horizontal and Vertical 7217. Inc.5kg (18. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.11 Patterns 880-960 MHz All specifications are subject to change without notice. 1801 East St.powerwave. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3.7 lbs) 1320 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4’8”x1’x5”) 10kg (22 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. co-polar (dB) Front-to-back ratio. Frontal. Powerwave Technologies. HxWxD Weight Including Bracket Wind Load. Powerwave Technologies. 42 m/s. Andrew Place Santa Ana. 4168. As a result of thorough.13 Horizontal Beamwidth: 65° Gain: 17.03.00 Single Band X-Urban Antenna 65° 2. thus substantially enhancing system benefits. hence the most efficient system performance. Powerwave® has produced a variety of designs that ensure the isolation. The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage.33.6 m X-polarized FET Antenna Part Number: 7218.5 dBi / 15. isolation beam squint and tracking.4 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio). indepth research and testing. This design ensures minimized intermodulation products.11. 7218. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance . Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. Powerwave Technologies.5° >18 <0. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 18kg (39.powerwave.5 / 15. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Inc. All Rights reserved. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Frontal.3. HxWxD Weight Including Bracket Wind Load. Mechanical Specifications Connector Type Connector Position Dimensions.com ©Copyright September 2003. Powerwave.5° >24 >20 >18 500 <-150 Typical Horizontal and Vertical 7218. co-polar (dB) Front-to-back ratio. Inc. . Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08077 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 42 m/s.4 Linear slanted ± 45° 50 < 1. 1801 East St.13 Patterns 880-960 MHz All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.7 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.1 > 30 65° <1 6° 6. Powerwave Technologies. @2x43dBm (dBc) 880 – 960 17. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. Inc. Andrew Place Santa Ana. 14 Horizontal Beamwidth: 65° Gain: 17. This design ensures minimized intermodulation products.5 dBi / 15.11. Powerwave has produced a variety of designs that ensure the isolation. indepth research and testing. isolation beam squint and tracking.6 m X-polarized FET Antenna Part Number: 7218. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage.33. As a result of thorough.4168. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain. thus substantially enhancing system benefits.04. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance . hence the most efficient system performance.4 dBd Electrical Downtilt: 4º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna.00 Single Band X-Urban Antenna 65° 2. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio). 7218. 5° >24 >20 >17 500 <-150 Typical Horizontal and Vertical 7218. Powerwave.14 Patterns 880-960 MHz All specifications are subject to change without notice. HxWxD Weight Including Bracket Wind Load. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. All Rights reserved. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 18kg (39.4 Linear slanted ± 45° 50 < 1.1 > 30 65° <1 4° 6. 1801 East St. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. Contact your Powerwave representative for complete performance data.5 / 15. Frontal. Inc.powerwave. Mechanical Specifications Connector Type Connector Position Dimensions. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08078 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.5° >18 <0. Powerwave Technologies. . 42 m/s.com ©Copyright September 2003. Inc. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. Inc. co-polar (dB) Front-to-back ratio. Powerwave Technologies. @2x43dBm (dBc) 880 – 960 17. Andrew Place Santa Ana.3.7 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. 33.6 m X-polarized FET Antenna Part Number: 7218. hence the most efficient system performance.00 Single Band X-Urban Antenna 65° 2. isolation beam squint and tracking. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance .9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Powerwave® has produced a variety of designs that ensure the isolation. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain.15 Horizontal Beamwidth: 65° Gain: 18. As a result of thorough.0 dBi / 15. thus substantially enhancing system benefits.05. This design ensures minimized intermodulation products.11. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio). The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage.4168. indepth research and testing. 7218. 1 > 30 65° <1 0° 6. Powerwave Technologies.15 Patterns 880-960 MHz All specifications are subject to change without notice. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking.7 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. .powerwave. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.0 / 15. co-polar (dB) Front-to-back ratio. Frontal. 1801 East St. HxWxD Weight Including Bracket Wind Load. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 18kg (39. Mechanical Specifications Connector Type Connector Position Dimensions. Contact your Powerwave representative for complete performance data. Inc. 42 m/s.5° >18 <0. Inc. @2x43dBm (dBc) 880 – 960 18.3. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08079 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. All Rights reserved. Inc.3° >24 >20 >18 500 <-150 Typical Horizontal and Vertical 7218.9 Linear slanted ± 45° 50 < 1.com ©Copyright September 2003. Powerwave. Andrew Place Santa Ana. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. thus substantially enhancing system benefits.11.0 dBi / 15. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance . isolation beam squint and tracking. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain.00 Single Band X-Urban Antenna 65° 2. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio). hence the most efficient system performance.6 m X-polarized FET Antenna Part Number: 7218. 7218. Powerwave® has produced a variety of designs that ensure the isolation. indepth research and testing. The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough.09. This design ensures minimized intermodulation products.33.4168.9 dBd Electrical Downtilt: 2º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna.19 Horizontal Beamwidth: 65° Gain: 18. 3. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3.5° >18 <0. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08080 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. @2x43dBm (dBc) 880 – 960 18. Mechanical Specifications Connector Type Connector Position Dimensions. co-polar (dB) Front-to-back ratio.7 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.9 Linear slanted ± 45° 50 < 1. 1801 East St. All Rights reserved. Powerwave. Inc. Powerwave Technologies. 42 m/s.4° >24 >20 >18 500 <-150 Typical Horizontal and Vertical 7218.19 Patterns 880-960 MHz All specifications are subject to change without notice.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. HxWxD Weight Including Bracket Wind Load.com ©Copyright September 2003. Contact your Powerwave representative for complete performance data. Inc. Andrew Place Santa Ana. Inc. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.powerwave. . CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 2580x256x50mm (8’6”x10”x2”) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8’10”x1’x5”) 18kg (39.0 / 15. Frontal. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.1 > 30 65° <1 2° 6. 5 dBi / 14.03.00 Single Band X-Urban Antenna 65º 1.11. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio).4 dBd Electrical Downtilt: 6º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna.33.9 m X-polarized FET Antenna Part Number: 7255. hence the most efficient system performance. As a result of thorough. 7255. indepth research and testing. The Powerwave® polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage. Powerwave® has produced a variety of designs that ensure the isolation. isolation beam squint and tracking. thus substantially enhancing system benefits.4168.13 Horizontal Beamwidth: 65° Gain: 16. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance . This design ensures minimized intermodulation products. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain. co-polar (dB) Front-to-back ratio. 42 m/s.4 Linear slanted ± 45° 50 < 1. Powerwave Technologies.5 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio. HxWxD Weight Including Bracket Wind Load. Andrew Place Santa Ana. Contact your Powerwave representative for complete performance data. 1801 East St.4:1 > 30 65° <1 6° 9° > 15 < 0. Inc. All Rights reserved.03 Patterns 880-960 MHz All specifications are subject to change without notice.powerwave. @2x43dBm (dBc) 880 – 960 16.5 / 14. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1940x256x50mm (6’4”x10”x2”) 9kg (20 lbs) 550 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6’9”x1’x5”) 12kg (26. Inc.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. Mechanical Specifications Connector Type Connector Position Dimensions. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.com ©Copyright September 2003. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08081 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3. Frontal. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. .3° >24 >20 >20 500 <-150 Typical Horizontal and Vertical 7255. 7255. isolation beam squint and tracking. hence the most efficient system performance. As a result of thorough.4168. This design ensures minimized intermodulation products. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio).9 dBd Electrical Downtilt: 0º Connector Type: 7/16 DIN female 880-960 MHz The Powerwave® X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Powerwave has produced a variety of designs that ensure the isolation. Key Benefits • Dual Polarization • Market Leading Performance • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance .9 m X-polarized FET Antenna Part Number: 7255.33. thus substantially enhancing system benefits. indepth research and testing.14 Horizontal Beamwidth: 65° Gain: 17 dBi / 14. cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain.00 Single Band X-Urban Antenna 65º 1. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45° to provide the independently fading signals needed for achieving top-quality coverage.11.04. 3° >24 >20 >20 500 <-150 Typical Horizontal and Vertical 7255. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc.04 Patterns 880-960 MHz All specifications are subject to change without notice. @2x43dBm (dBc) 880 – 960 17 / 14. . CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female Bottom 1940x256x50mm (6’4”x10”x2”) 9kg (20 lbs) 550 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6’9”x1’x5”) 12kg (26. Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies. Inc. HxWxD Weight Including Bracket Wind Load. co-polar (dB) Front-to-back ratio.3 <1 0° 9° > 17 < 0. Mechanical Specifications Connector Type Connector Position Dimensions. Andrew Place Santa Ana. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08082 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave.5 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 1801 East St. Frontal. Powerwave Technologies.powerwave. Contact your Powerwave representative for complete performance data. 42 m/s.com ©Copyright September 2003.Single Band X-Urban Antenna Electrical Specifications Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal –3 dB beamwidth Tracking. total power (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3.9 Linear slanted ± 45° 50 < 1. All Rights reserved. Powerwave Technologies. Inc. Horizontal plane (dB) Electrical downtilt Vertical –3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio.4:1 > 30 65° +/. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.5 dBi Electrical Downtilt: 0° Connector Type: 7/16 DIN 1710-2170 MHz The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology. This design ensures the highest possible cross-polar discrimination value.00 Horizontal Beamwidth: 65° Gain: 15.7 m x-polarized FET Antenna Part Number 7700.High Broadband Antenna 65° 0. Typical Horizontal and Vertical 7700. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. which provides high isolation performance and a wide VSWR bandwidth.00 Patterns . 8 COVERAGE AND CAPACITY 1710-2170 MHz Nominal Impedance (Ohms) VSWR Isolation betw een inputs.5mm (2’4”x7”x4” ) 7. ± 0. Powerwave. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.1° NETWORK OPTIMIZATION Mechanical Specifications Connector Type Dimensions.3 kg (16 lbs) 35 lbf (156N) 70m/s (156 mph) DC Grounded ASA Light Gray (RAL 7035 on all visible plastic parts) 880x200x200mm (2'11"x8"x8“ ) 8.2kg (18 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.3:1 >30 67±3° 66±2° <1. 2Tx@43dBm (dBc) IM7. 2110-2170 15. HxWxD Weight with Brackets Wind Load. Inc. Inc.8±0. .6 Dual linear ±45° 50 1.7m/s) Cd=1 Survival Wind Speed (mph) Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.1 1850-1990 15. Andrew Place Santa Ana. All Rights reserved. 100 mph(44. typical >-18 >30 >26 >17 >17 <-153 >19 >15 <-153 <-160 250 500 >19 >11 QUALITY AND RELIABILITY TECHNOLOGY LEADERSHIP 1900-2025.8° 0° 13. 824-960MHz (dB) Horizontal -3 dB beamw idth Tracking.6° >19 0.3dB Beam w idth Sidelobe suppression. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female 709x167x89.com ©Copyright March 2005.6° >-20 . Frontal. ±60° (dB) Electrical dow ntilt Vertical .powerwave. Average per input (W) Pow er Handling.High Broadband Antenna Electrical Specifications Electrical Specifications Frequency band (MHz) Gain. Average total (W) All specifications are subject to change without notice. 2Tx@43dBm (dBc) Pow er Handling. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08189 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.8±1. Inc.0 14. 64±3° 12.7±0. 1801 East St. Contact factory for complete performance data.5 (dBi) Polarization 1710-1880 15. Powerwave Technologies.Horizontal plane. total pow er (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3. which provides high isolation performance and a wide VSWR bandwidth. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.06 Patterns . This design ensures the highest possible cross-polar discrimination value.5 dBi Electrical Downtilt: 6° Connector Type: 7/16 DIN 1710-2170 MHz The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.06 Horizontal Beamwidth: 65° Gain: 15. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.7 m x-polarized FET Antenna Part Number 7700. Typical Horizontal and Vertical 7700.High Broadband Antenna 65° 0. 8° >17 0.powerwave.6 >-26 . Inc. Andrew Place Santa Ana. Average total (W) 64±3° 12. Contact your Powerwave representative for complete performance data. ± 0. 100 mph(44. 2110-2170 15.7±0.3:1 67±3° >30 65±3° <1.1° NETWORK OPTIMIZATION All specifications are subject to change without notice. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08190 Rev. Powerwave Technologies. 1801 East St.5 (dBi) 1710-1880 15.1 1850-1990 15. HxWxD Weight with Brackets Wind Load. ±60° (dB) Electrical dow ntilt Vertical -3dB Beam w idth Sidelobe suppression. total pow er (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3. typical >-20 >30 >26 >17 >17 <-153 >19 >15 <-153 <-160 250 500 >19 >11 QUALITY AND RELIABILITY TECHNOLOGY LEADERSHIP 1900-2025.8±1. Frontal.com ©Copyright March 2005. Average per input (W) Pow er Handling.High Broadband Antenna Electrical Specifications Electrical Specifications Frequency band (MHz) Gain.3 kg (16 lbs) 35 lbf (156N) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 880x200x200mm (2'11"x8"x8“ ) 8.8 COVERAGE AND CAPACITY 1710-2170 MHz Polarization Nominal Impedance (Ohm) VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking. Inc.A Corporate Headquarters Powerwave Technologies. Powerwave Technologies.Horizontal plane. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.8±0.2kg (18 lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. . Vertical 1 st upper (dB) Vertical beam squint First null-f ill (dB) Front-to-back ratio (dB) Front-to-back ratio.8° 6° 13.5mm (2’4”x7”x4” ) 7. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 2Tx@43dBm (dBc) Pow er Handling.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female 709x167x89.6 Dual linear ±45° 50 1. Powerwave.0 14. All Rights reserved. Mechanical Specifications Connector Type Dimensions. 2Tx@43dBm (dBc) IM7. which provides high isolation performance and a wide VSWR bandwidth. Typical Horizontal and Vertical 7701.00 Horizontal Beamwidth: 65° Gain: 18 dBi Electrical Downtilt: 0° Connector Type: 7/16 DIN 1710-2170 MHz The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.3 m x-polarized FET Antenna Part Number 7701.High Broadband Antenna 65° 1.00 Patterns . This design ensures the highest possible cross-polar discrimination value. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. 3:1 67±3° >30 66±2° <1. Contact factory for complete performance data.0 7.1 kg (22 lbs) 70 lbf (310N) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 1480x200x200mm (4'10"x8"x8“ ) 11kg (24. Vertical 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Powerwave Technologies. ± 0. typical >-18 >30 >27 >17 >17 <-153 >19 >14 <-150 <-160 250 500 >20 >11 QUALITY AND RELIABILITY 1900-2025. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female 1309x167x89. All Rights reserved.Horizontal plane. Andrew Place Santa Ana.5 (dBi) Polarization Nominal Impedance (Ohm) 1710-1880 17. Frontal. Average total (W) 64±3° TECHNOLOGY LEADERSHIP 6.2 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5° >-20 . 2Tx@43dBm (dBc) Pow er Handling. 100 mph(44. Inc.powerwave. Powerwave Technologies. Inc. Mechanical Specifications Connector Type Dimensions. total pow er (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3.3° >20 0.7±0. 1801 East St.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.com ©Copyright March 2005. ±60° (dB) Electrical dow ntilt Vertical -3dB Beam w idth Sidelobe suppression.5mm (4’4”x7”x4” ) 10.4±0.4° 0° 6.3 COVERAGE AND CAPACITY 1710-2170 MHz VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking.5 1850-1990 18 Dual linear ±45° 50 1. Powerwave. . Average per input (W) Pow er Handling. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.2±0. 2Tx@43dBm (dBc) IM7. Inc.High Broadband Antenna ElectricalSpecifications Electrical Specifications Frequency band (MHz) Gain. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08191 RevA Tel: 714-466-1000 Fax: 714-466-5800 www.5° NETWORK OPTIMIZATION All specifications are subject to change without notice. HxWxD Weight With Brackets Wind Load.2110-2170 18. 02 Patterns .High Broadband Antenna 65° 1.3 m x-polarized FET Antenna Part Number 7701. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.02 Horizontal Beamwidth: 65° Gain: 18 dBi Electrical Downtilt: 2° Connector Type:7/16 DIN 1710-2170 MHz The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology. Typical Horizontal and Vertical 7701. which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. 2Tx@43dBm (dBc) Pow er Handling.0 7. Average total (W) All specifications are subject to change without notice. Andrew Place Santa Ana.5 1850-1990 18 Dual linear ±45° 50 1.com ©Copyright March 2005.powerwave.3° >19 0.High Broadband Antenna Electrical Specifications Frequency band (MHz) Gain.4° 2° 6. Powerwave Technologies. Powerwave Technologies.5° >-22 .5 (dBi) Polarization Nominal Impedance (Ohms) 1710-1880 17. All Rights reserved. Inc. 1801 East St. 2Tx@43dBm (dBc) IM7. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08192 Rev A Corporate Headquarters Powerwave Technologies. Inc. 64±3° TECHNOLOGY LEADERSHIP 6. HxWxD Weight with Brackets Wind Load.3 COVERAGE AND CAPACITY 1710-2170 MHz VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking. ± 0. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.5mm (4’4”x7”x4” ) 10. Powerwave.7±0. 100 Mph Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female 1309x167x89.3:1 >30 67±3° 66±2° <1. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. typical >-18 >30 >26 >17 >17 <-153 >19 >14 <-150 <-160 250 500 >20 >11 QUALITY AND RELIABILITY 1900-2025.2±0. . CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. total pow er (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3. Average per input (W) Pow er Handling. Contact your Powerwave representative for complete performance data.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC Grounded ASA Light Gray RAL 7035 on all visible plastic parts 1480x200x200mm (4'10"x8"x8“ ) 11kg (24. ±60° (dB) Electrical dow ntilt Vertical -3dB Beam w idth Sidelobe suppression. Frontal.Horizontal plane.4±0.2 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5° NETWORK OPTIMIZATION Mechanical Specifications Connector Type Dimensions.2110-2170 18. Inc. High Broadband Antenna 65° 1. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.3 m x-polarized FET Antenna 1710-2170 MHz Part Number 7701. which provides high isolation performance and a wide VSWR bandwidth.06 Horizontal Beamwidth: 65o Gain: 18dBi Electrical Downtilt: 6o Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.06 Patterns . Typical Horizontal and Vertical 7701. This design ensures the highest possible cross-polar discrimination value. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. All Rights reserved. ±60° (dB) Electrical dow ntilt Vertical -3dB Beam w idth Sidelobe suppression. total pow er (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3.3:1 >30 65±3° 1900-2025. ± 0. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.7±0.2 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.0 6° 6. 2Tx @43dBm (dBc) IM7.High Broadband Antenna Electrical Specifications Frequency band (MHz) Gain.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.2±0. 100 mph(44. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 1850-1990 18 Dual linear ±45° 50 1. Contact factory for complete performance data.5° NETWORK OPTIMIZATION All specifications are subject to change without notice. Powerwave Technologies. HxWxD Weight With Brackets Wind Load. Frontal.5° >-26 . Mechanical Specifications Connector Type Dimensions. . ty pical >-20 >29 >25 >19 >14 <-153 <-160 >20 >11 QUALITY AND RELIABILITY 1710-1880 17. Powerwave Technologies. Powerwave. Av erage per input (W) Pow er Handling.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 1480x200x200mm (4'10"x8"x8“ ) 11kg (24.3° >18 0.5mm (4’4”x7”x4” ) 10.4° 67±3° <1. 1801 East St.5 (dBi) Polarization Nominal Impedance (Ohms) VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking. Inc. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female 1309x167x89. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08193 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www. 2Tx @43dBm (dBc) Pow er Handling.4±0.Horizontal plane. Av erage total (W) 250 500 >17 >17 <-153 7.com ©Copyright March 2005.powerwave.2110-2170 18.3 COVERAGE AND CAPACITY 1710-2170 MHz TECHNOLOGY 64±3°LEADERSHIP 6. Andrew Place Santa Ana. Inc. Inc. which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.x0 Horizontal Beamwidth: 65o Gain: 15.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN 1710-2170 MHz The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.7 m x-polarized MET Antenna Part Number 7720. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.High Broadband Antenna 65° 0.00 Patterns . Typical Horizontal and Vertical 7720. This design ensures the highest possible cross-polar discrimination value. 6 COVERAGE AND CAPACITY 1710-2170 MHz 64±3° TECHNOLOGY LEADERSHIP 12. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08194 Rev A Corporate Headquarters Powerwave Technologies.15. Mechanical Specifications Connector Type Dimensions.12.1°±0. 7720.com ©Copyright March 2005. . 1801 East St.3 kg (16 lbs) 35 lbf (156 N) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 2’11”x8”x8” (880x200x200mm) 8.2kg (18 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. Powerwave Technologies.40 .top 709x167x89.bottom. 2Tx@43dBm (dBc) Pow er Handling. Average total (W) 250 500 >15 >15 <-153 14.8.3 Dual linear ±45° 50 1.16° MET >18 >13 All specifications are subject to change without notice.5 0° to 16° 13.5 (dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation betw een inputs(dB) Horizontal -3 dB beamw idth Tracking. Contact your Powerwave representative for complete performance data.powerwave.00 .5° >-29 .4.Horizontal plane. 7720. Powerwave. total pow er (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3.2110-2170 15.9° NETWORK OPTIMIZATION >17.16. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. ±60° (dB) Electrical dow ntilt range (adjustable) Vertical -3dB Beam w idth Sidelobe suppression.5°±0. All Rights reserved.4:1 >30 65±3° <1. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. HxWxD Weight with Brackets Wind Load. 2Tx@43dBm (dBc) IM7. typical >-25 >30 >25 >18 >15 <-153 <-160 QUALITY AND RELIABILITY 1900-2025. Andrew Place Santa Ana.8° 67±4° 1710-1880 15 1850-1990 15. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.15 @ 0. @100 mph(44.16. Average per input (W) Pow er Handling. Inc.7m/s) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female.5mm (2’4”x7”x4”) 7. Frontal. Powerwave Technologies. ± 0.High Broadband Antenna Electrical Specifications Specifications Frequency band (MHz) Gain. Inc.5° 0.5°±0. x0 Horizontal Beamwidth: 65° Gain: 18 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperturecoupled patch technology. and is Remote Electrical Tilt (RET) upgradeable. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beamwidth over the frequency band.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. slim and robust design . This design ensures the highest possible cross-polar discrimination value.11.33. which provides high isolation performance and a wide VSWR bandwidth. Powerwave broadband antennas come with Manually adjustable Electrical Tilt (MET) which offers operators flexibility in turning of tilt angles. as well as a high front-to-back ratio. as well as logistical advantages.3 m x-polarized MET Antenna 1710-2170 MHz Part Number: 7721. Key Benefits • Excellent broad.00 High Broadband Antenna 65° 1.4168. 7721.2. Average Total (W) IM3. Inc.6 ± 0. total power (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) Power Handling. typical >-18 >30 >27 >19 >14 250 500 <-153 <-153 < -160 >20 >12 6.bottom. Inc.6. Inc. Powerwave Technologies.0 0 ° to 8 ° 6. All Rights reserved. 2Tx@43dBm (dBc) IM7.14 @ 0.5mm (4’4”x7”x4”) 10. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 100 mph(44.4° 67 ± 3° 1710-1880 17.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal -3 dB Beam width Tracking. vertical 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.00 Patterns All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.3 ± 0.2 lbs) Do31-08195 Rev A Corporate Headquarters Powerwave Technologies. HxWxD Weight with Brackets Wind Load.5 1850-1990 18 Dual linear ±45° 50 1. 2Tx@43dBm (dBc) >17 >18 7 ± 0. ± 0.8° MET 64 ± 3° 1900-2025. Powerwave. Andrew Place Santa Ana.6° >18.5° >-24 .16. ±60° (dB) Electrical downtilt range (adjustable) Vertical -3dB Beam width Sidelobe suppression. Mechanical Specifications Connector Type Dimensions.High Broadband Antenna 1710-2170 MHz Electrical Specifications Frequency band (MHz) Gain.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC grounded ASA Light Gray (RAL 7035 on all visible plastic parts) 1480x200x200mm (4'10"x8"x8") 11kg (24.18.00 .4:1 30 66 ± 2° <1.top 1309x167x89.4° 0.16. 1801 East St.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female. Frontal. 7721.4.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies.40 . Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.horizontal plane. . Average Per Input (W) Power Handling.3 Typical Horizontal and Vertical 7721. 2110-2170 18. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.powerwave. 11.33. and is Remote Electrical Tilt (RET) upgradeable.10 Horizontal Beamwidth: 65° Gain: 18 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperturecoupled patch technology.4168. This design ensures the highest possible cross-polar discrimination value. slim and robust design . which provides high isolation performance and a wide VSWR bandwidth.00 High Broadband Antenna 65° 1. as well as logistical advantages. Powerwave broadband antennas come with Manually adjustable Electrical Tilt (MET) which offers operators flexibility in turning of tilt angles. as well as a high front-to-back ratio. Key Benefits • Excellent broad. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beamwidth over the frequency band.3 m x-polarized MET Antenna 1710-2170 MHz Part Number: 7721.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. 4° 67 ± 3° 1710-1880 17.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female 1309x167x89. Mechanical Specifications Connector Type Dimensions.3 Typical Horizontal and Vertical 7721. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Contact your Powerwave representative for complete performance data. HxWxD Weight with Brackets Wind Load.powerwave.0 2 ° to 10 ° 6. 1801 East St.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC grounded ASA Light Gray (RAL 7035 on all visible plastic parts) 1480x200x200mm (4'10"x8"x8") 11kg (24.3 ± 0.10° MET 64 ± 3° 1900-2025.4:1 30 66 ± 2° <1.High Broadband Antenna 1710-2170 MHz Electrical Specifications Frequency band (MHz) Gain. 100 mph(44.4. Inc. Powerwave. ± 0. 2Tx@43dBm (dBc) >17 >18 7 ± 0. Inc.8.16.horizontal plane.4° 0. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5mm (4’4”x7”x4”) 10. 2110-2170 18. Average Total (W) IM3. ±60° (dB) Electrical downtilt range (adjustable) Vertical -3dB Beam width Sidelobe suppression.6° >18. typical >-18 >30 >27 >19 >14 250 500 <-153 <-153 < -160 >20 >12 6. Average Per Input (W) Power Handling.10 Patterns All specifications are subject to change without notice.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. . total power (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) Power Handling.16.5° >-24 . vertical 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.14.13 @ 2. Powerwave Technologies.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal -3 dB Beam width Tracking. All Rights reserved. 2Tx@43dBm (dBc) IM7. Powerwave Technologies. Inc. Frontal.2 lbs) D031-08196 Rev A Corporate Headquarters Powerwave Technologies.6.5 1850-1990 18 Dual linear ±45° 50 1.6 ± 0. Andrew Place Santa Ana. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005. which provides high isolation performance and a wide VSWR bandwidth.4168.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light.x0 Horizontal Beamwidth: 65° Gain: 19. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.33.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology. This design ensures the highest possible cross-polar discrimination value.00 High Broadband Antenna 65° 2.11.0 m x-polarized MET Antenna 1710-2170 MHz Part Number: 7722. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. slim and robust design . Key Benefits • Excellent broad. .top 1934x167x89.7 lbs ) 412 N (92.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.2.16. HxWxD Weight Including Brackets Wind Load. Inc.18. 100 mph Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Mounting 7/16 DIN female.High Broadband Antenna 1710-2170 MHz Electrical Specifications Frequency band (MHz) Gain.0 0° to 5.16. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5mm (6’4”x6.5° 65 ± 3° Typical Horizontal and Vertical 7722. <-153 >18 >20 4.3.1. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.2 1900-2025. total power (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) Power Handling.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal -3 dB beamwidth Tracking. All Rights reserved.00 Patterns Mechanical Specifications Connector Type Dimensions.4.4° >-20 .5”) 12. Average per input (W) Power Handling.5° 4.40 . 7722. typical >-16 >30 >27 >20 >17 250 500 <-153 < -160 >21 >12 4. Powerwave. Panning Mechanism D031-08197 Rev A Corporate Headquarters Powerwave Technologies.4:1 >30 66 ± 2° <1.18.Horizontal plane. Inc.3° 67 ± 3° 1710-1880 19 1850-1990 19.14 @ 0.2° 0. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.6”x3.6 kg (27. 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. 2Tx@43dBm All specifications are subject to change without notice.7 ± 0. 2110-2170 19.7 Dual slant ±45° 50 1. Andrew Place Santa Ana.3° >18. 7722.00 . ± 0. Powerwave Technologies.4 ± 0. 1801 East St.6 lbf) 70m/s (156 mph) DC Grounded ASA Grey (RAL 7035 on all visible plastic part) 2105x200x200mm (6'11"x8"x8") Pole Clamps. Average total (W) IM3. 2Tx@43dBm IM7. ±60° (dB) Electrical downtilt range (adjustable) Vertical -3 dB Beam width Sidelobe suppression. Inc.2° ± 0.bottom. Powerwave Technologies. Frontal. Contact your Powerwave representative for complete performance data. x0 Horizontal Beamwidth: 90° Gain: 13. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. This design ensures the highest possible cross-polar discrimination value. Typical Horizontal and Vertical 7735. which provides high isolation performance and a wide VSWR bandwidth.7 m x-polarized MET Antenna Part Number 7735.High Broadband Antenna 90° 0.00 Patterns . Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN 1710-2170 MHz The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology. 5 (dBi) Polarization Nominal Impedance (Ohms) 1710-1880 13. Contact your Powerwave representative for complete performance data.1 kg (20 lbs) Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.bottom.7 COVERAGE AND CAPACITY 1710-2170 MHz VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking. Average per input (W) Pow er Handling.14@ 0. 2Tx@43dBm (dBc) IM7.5 1850-1990 13. Inc.powerwave. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 D031-08198 Rev A Tel: 714-466-1000 Fax: 714-466-5800 www.7°±1° 0° to 16° 13.com ©Copyright March 2005.2°±1° NETWORK OPTIMIZATION >18.High Broadband Antenna Electrical Specifications Specifications Frequency band (MHz) Gain.16° MET >12 >10 All specifications are subject to change without notice.17. Powerwave Technologies. 4.16.15. Powerwave. 8.2 kg (18 lbs) 70 m/s (156 mph) DC grounded PVC Light Gray 880x200x200mm (2’11”x8”x8” ) 9. 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Inc. Inc. 7735. Powerwave Technologies. total pow er (dB) Cross-polar discrimination (XPD) 0°(dB) Cross-polar discrimination ±60° (dB) IM3.5 Dual linear ±45° 50 1.2110-2170 13. 1801 East St. .4°±1° 0. ± 0. 7735.top Bottom 709x167x89mm (2’4”x7”x4” ) 35 lbf (156 N) 8. Hxwxd Wind Load.0 14. Andrew Place Santa Ana. Frontal.40 .Horizontal plane. Average total (W) 87±4° TECHNOLOGY LEADERSHIP 12. All Rights reserved. typical >-18 >25 >23 >13 >10 -153 >13 >10 -153 -160 250 500 QUALITY AND RELIABILITY 1900-2025.4:1 >30 86±3° 86±3° <1. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 7/16 DIN female. 100 mph Cd=1 Weight With Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight Corporate Headquarters Powerwave Technologies.00 .8° >-24 . 2Tx@43dBm (dBc) Pow er Handling. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. ±60° (dB) Electrical dow ntilt range (adjustable) Vertical -3dB Beam w idth Sidelobe suppression. 12 . Mechanical Specifications Connector Type Connector Position Dimensions. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. slim and robust design .x0 Horizontal Beamwidth: 90° Gain: 16. which provides high isolation performance and a wide VSWR bandwidth.3 m x-polarized MET Antenna 1710 .and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light.00 High Broadband Antenna 90° 1.4168.33.2170 MHz Part Number: 7740.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology. This design ensures the highest possible cross-polar discrimination value.11. Key Benefits • Excellent broad. 2.3 ± 0.14 @ 0. total power (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.6”x3. Frontal. 2Tx@43dBm (dBc) IM7. 100 mph Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female. .3“x8”x8”) 13kg (28.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.15.00 Patterns All specifications are subject to change without notice. All Rights reserved. Average total (W) >14 >10 <-153 1710-1880 16. Inc. Powerwave Technologies.5”) 356 N (80 lbf) < 1° 70m/s (156 mph) DC grounded PVC Light Gray 1480x200x200mm (58.3 1850-1990 16. typical >-18 >29 >23 >13 >10 <-153 < -160 250 500 >12 >10 1900-2025.4° >-24 . ±60° (dB) Electrical downtilt range (adjustable) Vertical Beam width -3dB Sidelobe suppression.6.15. Average per input (W) Power Handling.6 lbs) D031-08199 Rev A Corporate Headquarters Powerwave Technologies.40 . Mechanical Specifications Connector Type Connector Position Dimensions.5 Typical Horizontal and Vertical 7740. ± 0.0 0° to 8° 7.top Bottom 1309x167x89mm (51.8° MET 0.00 .5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs.bottom.5° 6. 2Tx@43dBm (dBc) Power Handling.4.8° >18. Inc.1 ± 0. 1801 East St. 7740. Inc.powerwave. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking.17. 2110-2170 16. Powerwave.5 Dual linear ±45° 50 1.5“x6. HxWxD Wind Load. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005. Andrew Place Santa Ana.5° 6.High Broadband Antenna 1710-2170 MHz Electrical Specifications Frequency band (MHz) Gain.Horizontal plane. 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Powerwave Technologies.6 ± 0. Contact your Powerwave representative for complete performance data.4:1 30 86 ± 3° <1. 7740. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.33.8 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology. Key Benefits • Excellent broad.11.00 High Broadband Antenna 90° 2. slim and robust design . while ensuring the highest possible crosspolar discrimination value.0 m x-polarized MET Antenna 1710-2170 MHz Part Number: 7745.x0 Horizontal Beamwidth: 90° Gain: 17.4168. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for flexibility of tilt angles.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. which provides high isolation performance and a wide VSWR bandwidth. 16.5° 1900-2025.4° 4.6”x3.0 0° to 5. Powerwave Technologies.14 @ 0. Inc.18. HxWxD Wind Load. Inc.3.8 kg (34.2. 1801 East St. Powerwave.4:1 >30 86 ± 3° <1.00 . ± 0.16. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5") 412 N (92.8 lbs) D031-08200 Rev A Corporate Headquarters Powerwave Technologies.6 lbf) < 1° 70m/s (156 mph) DC grounded PVC Light Gray 2105x200x200mm (6'11"x8"x8") 15.2 ± 0.7 Dual linear ±45° 50 1. ±60° (dB) Electrical downtilt range (adjustable) Vertical Beam width -3dB Sidelobe suppression.3° >-24 . Powerwave Technologies.High Broadband Antenna Electrical Specifications 1710-2170 MHz Frequency band (MHz) Gain.4. All Rights reserved. Average total (W) 1710-1880 17. Inc. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.5° MET 0.5 1850-1990 17.bottom. 100 mph Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female. typical >-18 >29 >23 >14 >13 >12 >10 >10 >10 <-153 <-153 < -160 250 500 Typical Horizontal and Vertical 7745.9 4. Andrew Place Santa Ana. Frontal. 7745.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Average per input (W) Power Handling. Contact your Powerwave representative for complete performance data.powerwave. 2Tx@43dBm (dBc) IM7. 7745. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.7 ± 0. total power (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ±60° (dB) IM3.Horizontal plane. .00 Patterns All specifications are subject to change without notice. 2110-2170 17. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 ± 0.top Bottom 1934x167x89mm (6'4"x6. 2Tx@43dBm (dBc) Power Handling.3° >18. 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking.14.40 . Mechanical Specifications Connector Type Connector Position Dimensions.4° 4.1.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs. 3 m xx-polarized MET Antenna 1710-2170 MHz Part Number: 7760.x0 Horizontal Beamwidth: 65° Gain: 18 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.33. Key Benefits • Excellent broad. slim and robust design . This design ensures the highest possible cross-polar discrimination value.00 Dual High Broadband Antenna 65° 1. which provides high isolation performance and a wide VSWR bandwidth.11.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light.4168. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. 00 . Mechanical Specifications Connector Type Connector Position Dimensions. 6. 18. 7th order. Powerwave Technologies. Inc.8 ± 0. Andrew Place Santa Ana. 42 m/s Cd=1 (N) Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4x 7/16 DIN female.powerwave.6° 0° to 8° < 0.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. co-polar (dB) First upper sidelobe suppression (dB) First null below horizon (dB) Power Handling. 1801 East St. ±0. Average Per Input (W) Power Handling.5° > 28 > 28 > 22. HxWxD Wind load. Contact your Powerwave representative for complete performance data. 2Tx@43dBm (dBc) 2 x 1710 . The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.2 ± 0. All Rights reserved.0 > 16 > 18 > 20 > 16 > 13 > 10 7.1 ± 0. RX Isolation between inputs (dB) Horizontal -3 dB beamwidth Horizontal tracking (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ± 60° (dB) Vertical -3 dB beamwidth Electrical downtilt Vertical beam squint Front-to-back ratio. Powerwave. Powerwave Technologies.00 Patterns QUALITY AND RELIABILITY All specifications are subject to change without notice. frontal.bottom. 7760. 4. Average Total (W) IM.5 18 18.4° 6. 8° edt > -24 (typical >-18) 250 1000 < -153 < -160 COVERAGE AND CAPACITY TECHNOLOGY LEADERSHIP NETWORK OPTIMIZATION Typical Horizontal and Vertical 7760.Dual High Broadband Antenna 1710-2170 MHz Electrical Specifications Frequency Range (MHz) Frequency Band (MHz) Gain. 7760. . 2110 – 2170 17. 2. 3rd order.top Bottom 1320x343x100mm (4'4"x1’2“x4”) 499 N (112 lbf) < 1° 70m/s (156 mph) DC grounded ASA Light Gray 1480x400x200mm (4'10"x1’4"x8") 20 kg (44 lbs) D031-08204 Rev A Corporate Headquarters Powerwave Technologies.4° 6. Inc.4:1 > 30 67° ± 4° 65° ± 4° 63° ± 4° < 2. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Inc.5 Dual linear ±45° 50 < 1. 20. 14 @ 0. 16.5(dBi) Polarization Nominal impedance (Ohm) VSWR. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.2170 1710 – 1880 1850 – 1990 1900 – 2025.40 . 2Tx@43dBm (dBc) IM. total power (dB) Front-to-back ratio. 0 m xx-polarized MET Antenna 1710-2170 MHz Part Number: 7765. which provides high isolation performance and a wide VSWR bandwidth.11.00 Dual High Broadband Antenna 65° 2. Key Benefits • Excellent broad.x0 Horizontal Beamwidth: 65° Gain: 19.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology. slim and robust design . Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.4168.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light.33. 8 19. ±0. Average Total (W) 1000 IM.5° Front-to-back ratio. Powerwave Technologies. co-polar (dB) > 28 First upper sidelobe suppression (dB) > 22. 7th order.5° Vertical beam squint < 0.4° 4. .2170 1850 – 1990 1900 – 2025.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.40 .bottom. Inc. Inc. 2110 – 2170 19.7 COVERAGE AND CAPACITY Gain. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 20. All Rights reserved. HxWxD Wind load.2 ± 0. Contact your Powerwave representative for complete performance data.Dual High Broadband Antenna 1710-2170 MHz Electrical Specifications Frequency Range (MHz) Frequency Band (MHz) 1710 – 1880 2 x 1710 . Average Per Input (W) 250 Power Handling. 14 @ 0. 15.4° 4. 18. total power (dB) > 28 Front-to-back ratio. 1. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4 ± 0.00 Patterns QUALITY AND RELIABILITY Mechanical Specifications Connector Type Connector Position Dimensions. Powerwave. 42 m/s Cd=1 (N) Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4x 7/16 DIN female. 2. 1801 East St.0 Cross-polar discrimination (XPD) 0° (dB) > 16 > 18 > 20 Cross-polar discrimination ± 60° (dB) > 16 > 13 > 10 Vertical -3 dB beamwidth 4. frontal. 7765.5(dBi) 18. 5° edt First null below horizon (dB) > -22 (typical >-18) Power Handling.powerwave.4:1 Isolation between inputs (dB) > 30 Horizontal -3 dB beamwidth 67° ± 4° 65° ± 4° 63° ± 4° Horizontal tracking (dB) < 2.7 ± 0. 2Tx@43dBm (dBc) < -153 IM. RX < 1. 2Tx@43dBm (dBc) < -160 All specifications are subject to change without notice. 3rd order.2 Polarization Dual linear ±45° Nominal impedance (Ohm) 50 VSWR.6° Electrical downtilt 0° to 5. 16.00 . 7765. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.top Bottom 1934x343x100mm (6'4"x1’2“x4”) 868 N (195 lbf ) < 1° 70m/s (156 mph) DC grounded ASA Light Gray 2105x400x200mm (6'11"x1’4"x8") 24 kg (55 lbs) D031-08206 Rev A Corporate Headquarters Powerwave Technologies. 3. Andrew Place Santa Ana. TECHNOLOGY LEADERSHIP NETWORK OPTIMIZATION Typical Horizontal and Vertical 7765. 4. Powerwave Technologies. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.x0 Horizontal Beamwidth: 90o Gain: 16.4168.3 m xx-polarized MET Antenna 1710-2170 MHz Part Number: 7762.33. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. which provides high isolation performance and a wide VSWR bandwidth.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.11. slim and robust design . Key Benefits • Excellent broad. This design ensures the highest possible cross-polar discrimination value.00 Dual High Broadband Antenna 90° 1.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4:1 > 30 89° ± 9° 93° ± 5° 90° ± 7° < 2. .00 . 6. Andrew Place Santa Ana.5 (dBi) Polarization Nominal impedance (Ohm) VSWR. co-polar (dB) Front-to-back ratio. 2Txa@43 dBc 1710 – 1880 16.5° 6. 2Txa@43 dBc IM. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.0 ± 0. 14 @ 0. Mechanical Specifications Connector Type Connector Position Dimensions.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies.bottom. HxWxD Wind Load.3 2 x 1710 .2170 1850 – 1990 1900 – 2025 2110 – 2170 16. 7762. 42m/s Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4 X 7/16 DIN female.Dual High Broadband Antenna 1710-2170 MHz Electrical Specifications Frequency Range Frequency Band (MHz) Gain.5 Dual linear ±45° 50 < 1. Powerwave Technologies.40 . 1801 East St.powerwave. 4.00 Patterns All specifications are subject to change without notice. 7762. Average Per Input (W) Power Handling. 8° EDT -25 (typical >-18) 250 1000 < -153 < -160 Typical Horizontal and Vertical 7762. 2. Inc.top Bottom 1320x343x100mm (4’4”x1’2”x4”) 499N (112 lbf) < 1° 70m/s (156 mph) DC grounded ASA Light Gray 1480x400x200mm (4'10"x1’4"x8") 22 kg (49 lbs) D031-08205 Rev A Corporate Headquarters Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.0 > 16 > 16 > 16 >8 >8 >8 7. 7th order. RX Isolation between inputs (dB) Horizontal -3 dB beamwidth Horizontal tracking (dB) Cross-polar discrimination (XPD) 0° (dB) Cross-polar discrimination ± 60° (dB) Vertical -3 dB beamwidth Electrical downtilt Vertical beam squint Front-to-back ratio.5° > 27 dB > 23 dB > 22.7 ± 0. Inc.7 16. Averge Total (W) IM. 18. 16.9° 0° to 8° < 0. total power (dB) First upper sidelobe suppression (dB) First null below horizon (dB) Power Handling. ± 0. Inc. Contact your Powerwave representative for complete performance data. 3rd order.5° 6.3 ± 0. All Rights reserved. Frontal. 20. Powerwave. 0 m x-polarized MET Antenna 1710-2170 MHz Part Number: 7766. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.33.x0 Horizontal Beamwidth: 90° Gain: 18 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.11. This design ensures the highest possible cross-polar discrimination value. Key Benefits • Excellent broad.4168.00 Dual High Broadband Antenna 90° 2. slim and robust design . Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light. which provides high isolation performance and a wide VSWR bandwidth. total power (dB) > 23 dB First upper sidelobe suppression (dB) > 22. 3. 16. Inc. Typical Horizontal and Vertical 7766.5° Vertical beam squint < 0. 2.Dual High Broadband Antenna Electrical Specifications Frequency Range Frequency Band (MHz) 1710 – 1880 2 x 1710 .8 Polarization Dual linear ±45° Nominal impedance (Ohm) 50 VSWR. Powerwave.00 . Frontal. 2Txa@43 dBc < -153 IM. 7766. Powerwave Technologies. Powerwave Technologies.4 ± 0. Averge Total (W) 1000 IM.5° 4. 7th order.5 (dBi) 17.5° 4. 20.2 ± 0. 1.top Bottom 1934x343x100mm (6’4”x1’2”x4”) 868N (195 lbf) < 1° 70m/s (156 mph) DC grounded ASA Light Gray 2105x400x200mm (6'11"x1’4"x8") 26 kg (57 lbs) D031-08207 Rev A Corporate Headquarters Powerwave Technologies. 18. Inc. All Rights reserved.0 Cross-polar discrimination (XPD) 0° (dB) > 16 > 16 > 16 Cross-polar discrimination ± 60° (dB) >8 >8 >8 Vertical -3 dB beamwidth 4. 15. RX < 1. 7766. . Contact your Powerwave representative for complete performance data.4:1 Isolation between inputs (dB) > 30 Horizontal -3 dB beamwidth 89° ± 9° 93° ± 5° 90° ± 7° Horizontal tracking (dB) < 2. 14 @ 0. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.40 . 3rd order. Average Per Input (W) 250 Power Handling.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 5° EDT First null below horizon (dB) > -25 (typical >-18) Power Handling.4 17. 2Txa@43 dBc < -160 All specifications are subject to change without notice.6 17. 42m/s Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4 X 7/16 DIN female. co-polar (dB) > 27 dB Front-to-back ratio.7 ± 0.5° Front-to-back ratio.2170 1850 – 1990 1710-2170 MHz 1900 – 2025 2110 – 2170 Gain.powerwave. Inc. ± 0. 4. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. HxWxD Wind Load.00 Patterns Mechanical Specifications Connector Type Connector Position Dimensions. 1801 East St.9° Electrical downtilt 0° to 5.bottom. Andrew Place Santa Ana. while generating less loss and ensuring higher gain. with no need for diplex filters. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands.4168.5 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7329.9 dBd) Electrical Downtilt: 0 ° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics.00 Horizontal Beamwidth: 65° Gain: 15. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. The ALXC is available in a number of variants. This technique minimizes intermodular distortion.11. Its outer radome is made of glass-fiber reinforced polyester (GRP).00 ALXC Dualband Antenna 65° 1. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance . Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.33.4/12. for each set of beamwidths. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients.5/15 dBi ( 13. maximum efficiency. All Rights reserved. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Sidelobe suppression.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (5’4”x1’2”x10”) 13.4/12.00 Patterns 925 MHz All specifications are subject to change without notice. Inc.5:1 >30 65° +/-5 0° 13/13° >13 / 15 >-20 >26 >22 >11 >-150 300 600 Typical Horizontal and Vertical 7329. 1801 East St.5/15. total power (dB) Cross-polar discrimination (dB) IM3. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (4’9”x11”x5”) 10. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies.ALXC Dual Band Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. 13.5 (dBi. Powerwave.0. Andrew Place Santa Ana.powerwave. . Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. 2Tx@43dBm (dBc) Power Handling. HxWxD Weight with Brackets Wind Load. Powerwave Technologies.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Average total (W) 870-960 / 1710-1880 15. Inc.9 Dual linear slanted 50 <1. ± 0. Contact your Powerwave representative for complete performance data. Average per input (W) Power Handling.00 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions. Frontal. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Typical Horizontal and Vertical 7329.5kg (30 lbs) D031-08143 Rev A Corporate Headquarters Powerwave Technologies. 5/15 dBi ( 13. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients.4/12.5 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7329.33. while generating less loss and ensuring higher gain.06 Horizontal Beamwidth: 65° Gain: 15. The ALXC is available in a number of variants.11.9 dBd) Electrical Downtilt: 6 ° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics.4168. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. for each set of beamwidths. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands. This technique minimizes intermodular distortion. with no need for diplex filters.00 ALXC Dualband Antenna 65° 1. maximum efficiency. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance . Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs. Its outer radome is made of glass-fiber reinforced polyester (GRP). Frontal. 1801 East St. Andrew Place Santa Ana. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Sidelobe suppression. ± 0. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave. total power (dB) Cross-polar discrimination (dB) IM3. Average per input (W) Power Handling. Average total (W) 870-960 / 1710-1880 15. .8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (5’4”x1’2”x10”) 13. Powerwave Technologies. Contact your Powerwave representative for complete performance data.5 (dBi.5/15.9 Dual linear slanted 50 <1. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 13. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (4’9”x11”x5”) 10.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Typical Horizontal and Vertical 7329. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.5:1 >30 65° +/-5 6° 13/13° >13 / 15 >-20 >26 >22 >11 >-150 300 600 Typical Horizontal and Vertical 7329.00 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions.5kg (30 lbs) D031-08143 Rev A Corporate Headquarters Powerwave Technologies. Inc. 2Tx@43dBm (dBc) Power Handling. All Rights reserved.ALXC Dual Band Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. Inc. HxWxD Weight with Brackets Wind Load.0. Powerwave Technologies.4/12.00 Patterns 925 MHz All specifications are subject to change without notice. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies.4/15.5 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7330. for each set of beamwidths.00 ALXC Dualband Antenna 65° 1.11. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients.33. while generating less loss and ensuring higher gain. Its outer radome is made of glass-fiber reinforced polyester (GRP). maximum efficiency. with no need for diplex filters. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .00 Electrical Downtilt: 0 ° Horizontal Beamwidth: 65° Gain: 15.5/17.4168. This technique minimizes intermodular distortion. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands. The ALXC is available in a number of variants.4 dBd) Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.5 dBi (13. Andrew Place Santa Ana. Average per input (W) Power Handling.4 Dual linear slanted 50 <1. Frontal. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.powerwave. ± 0. 1801 East St. total power (dB) IM3.4/15. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Average total (W) 870-960 / 1710-1880 15.5/17. Contact your Powerwave representative for complete performance data.00 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions. All Rights reserved. . 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (4’9”x11”x5”) 10.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5:1 >30 <2 >11 65° +/-5 0° 13/7° <0. Powerwave Technologies. Powerwave Technologies. HxWxD Weight with Brackets Wind Load.00 Patterns 925 MHz All specifications are subject to change without notice. Inc. 2Tx@43dBm (dBc) Power Handling. Typical Horizontal and Vertical 7330.5 (dBi.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (5’4”x1’2”x10”) 13.5.ALXC Dualband Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. Inc. 13.5kg (30 lbs) D031-08144 Rev A Corporate Headquarters Powerwave Technologies. Powerwave. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5° >16 >-20/-18 >26 >22 >-150 300 600 Typical Horizontal and Vertical 7330. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 5 dBi /13. maximum efficiency.4/15. Its outer radome is made of glass-fiber reinforced polyester (GRP). while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies.33. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .00 Dual Band ALXC Antenna 65° 1. while generating less loss and ensuring higher gain. with no need for diplex filters. The ALXC is available in a number of variants.5 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7330. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. for each set of beamwidths.4 dBd Electrical Downtilt: 2 ° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.02 Horizontal Beamwidth: 65° Gain: 15.4168.11. This technique minimizes intermodular distortion. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands.5/17. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. ± 0. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (4’9”x11”x5”) 10. Powerwave. HxWxD Weight with Brackets Wind Load.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5kg (30 lbs) D031-08145 Rev A Corporate Headquarters Powerwave Technologies. Contact your Powerwave representative for complete performance data. Average per input (W) Power Handling.5/17.4/15. Powerwave Technologies. .5:1 >30 <2 >11 65° +/-5 2° 13/7° <0. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Frontal.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (5’4”x1’2”x10”) 13. 1801 East St. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. 2Tx@43dBm (dBc) Power Handling. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Average total (W) 870-960 / 1710-1880 15. 13. Inc.5 (dBi. Powerwave Technologies.Dual Band ALXC Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain.powerwave. All Rights reserved. total power (dB) IM3.5. Inc. Inc.4 Dual linear slanted 50 <1. Typical Horizontal and Vertical 7330.02 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions.5° >16 >-20/-18 >26 >22 >-150 300 600 Typical Horizontal and Vertical 7330. Andrew Place Santa Ana. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression.02 Patterns 925 MHz All specifications are subject to change without notice. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .4 dBd Electrical Downtilt: 4 ° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics.33. for each set of beamwidths. The ALXC is available in a number of variants. This technique minimizes intermodular distortion.4/15. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands.4168. while generating less loss and ensuring higher gain.11. Its outer radome is made of glass-fiber reinforced polyester (GRP).00 Dual Band ALXC Antenna 65° 1. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies.5 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7330. with no need for diplex filters.04 Horizontal Beamwidth: 65° Gain: 15.5/17. maximum efficiency.5 dBi / 13. 4/15.04 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5° >16 >-20/-18 >26 >22 >-150 300 600 Typical Horizontal and Vertical 7330.5:1 >30 <2 >11 65° +/-5 4° 13/7° <0. 2Tx@43dBm (dBc) Power Handling. 13.5/17.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (5’4”x1’2”x10”) 13.5kg (30 lbs) D)31-08146 Rev A Corporate Headquarters Powerwave Technologies.4 Dual linear slanted 50 <1. Powerwave Technologies. Contact your Powerwave representative for complete performance data. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 (dBi. HxWxD Weight with Brackets Wind Load. Powerwave. Frontal. Typical Horizontal and Vertical 7330. All Rights reserved. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (4’9”x11”x5”) 10.5. . Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Inc. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.ALXC Dualband Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain.powerwave. ± 0. total power (dB) IM3. Inc. Average per input (W) Power Handling. Average total (W) 870-960 / 1710-1880 15. Andrew Place Santa Ana.04 Patterns 925 MHz All specifications are subject to change without notice. Powerwave Technologies. Inc. 1801 East St. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 11.4 dBd Connector Type: 7/16 DIN female 870-960/1710-1880MHz The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands.4168. with no need for diplex filters.5 m X-polarized FET Antenna Part Number: 7330.5 dBi / 13. for each set of beamwidths.06 Electrical Downtilt: 6 ° Horizontal Beamwidth: 65° Gain: 15. This technique minimizes intermodular distortion. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .33. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies.00 Dual Band ALXC Antenna 65° 1. Its outer radome is made of glass-fiber reinforced polyester (GRP). Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.5/17. while generating less loss and ensuring higher gain. The ALXC is available in a number of variants.4/15. maximum efficiency. 5/17.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (5’4”x1’2”x10”) 13. Typical Horizontal and Vertical 7330. Inc. .4/15. Powerwave Technologies. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5° >16 >-20/-18 >26 >22 >-150 300 600 Typical Horizontal and Vertical 7330. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. 1801 East St.5 (dBi.4 Dual linear slanted 50 <1. 2Tx@43dBm (dBc) Power Handling.5:1 >30 <2 >11 65° +/-5 6° 13/7° <0. 13. All Rights reserved. Inc.06 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (4’9”x11”x5”) 10. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5kg (30 lbs) D031-08147 Rev A Corporate Headquarters Powerwave Technologies. Contact your Powerwave representative for complete performance data. ± 0. Powerwave. total power (dB) IM3. Average per input (W) Power Handling. Frontal.powerwave. HxWxD Weight with Brackets Wind Load.Dual Band ALXC Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. Andrew Place Santa Ana. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.5. Inc.06 Patterns 925 MHz All specifications are subject to change without notice. Average total (W) 870-960 / 1710-1880 15.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression. Powerwave Technologies. Its outer radome is made of glass-fiber reinforced polyester (GRP).9 dBd Electrical Downtilt: 0 ° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics.00 Dual Band ALXC Antenna 65° 2.11. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance . while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies.5/16 dBi / 14.33. maximum efficiency. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands. with no need for diplex filters. for each set of beamwidths. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients.0 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7331.4168. This technique minimizes intermodular distortion. while generating less loss and ensuring higher gain. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.4/13.00 Horizontal Beamwidth: 65° Gain: 16. The ALXC is available in a number of variants. 4/13.5kg (36. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (6’6”x11”x5”) 13. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.5 (dBi. Inc. Average per input (W) Power Handling. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (7’1”x1’2”x10”) 16. HxWxD Weight with Brackets Wind Load. Powerwave Technologies. Andrew Place Santa Ana. Average total (W) 870-960 / 1710-1880 16. Inc.00 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions.5/16 14. Inc. . 2Tx@43dBm (dBc) Power Handling.00 Patterns 925 MHz All specifications are subject to change without notice.9 Dual linear slanted 50 <1.5:1 >30 <2 >11 65° +/-5 0° 9°/9° <0. Powerwave.5° >16 >-22/-22 >25 >21 >-150 300 600 Typical Horizontal and Vertical 7331. 1801 East St. Contact your Powerwave representative for complete performance data.4 lbs) D031-08148 Rev A Corporate Headquarters Powerwave Technologies. Typical Horizontal and Vertical 7331. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. total power (dB) IM3.powerwave. All Rights reserved. ± 0. Powerwave Technologies. Frontal.Dual Band ALXC Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. while generating less loss and ensuring higher gain. The ALXC is available in a number of variants. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs. maximum efficiency.4/13.02 Horizontal Beamwidth: 65° Gain: 16. with no need for diplex filters.11.00 Dual Band ALXC Antenna 65° 2. Its outer radome is made of glass-fiber reinforced polyester (GRP). Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .33. for each set of beamwidths. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies.9 dBd Electrical Downtilt: 2° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics.5/16 dBi / 14. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. This technique minimizes intermodular distortion.0 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7331. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands.4168. 4 lbs) D031-08149 Rev A Corporate Headquarters Powerwave Technologies. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (6’6”x11”x5”) 13. Powerwave Technologies. Contact your Powerwave representative for complete performance data. Frontal. Inc. ± 0. Typical Horizontal and Vertical 7331.5° >16 >-22/-22 >25 >21 >-150 300 600 Typical Horizontal and Vertical 7331. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.02 Patterns 925 MHz All specifications are subject to change without notice.9 Dual linear slanted 50 <1.5 (dBi.5/16 14.powerwave. Inc.5kg (36. 1801 East St. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Powerwave. 2Tx@43dBm (dBc) Power Handling.5:1 >30 <2 >11 65° +/-5 2° 9°/9° <0.4/13. All Rights reserved. Powerwave Technologies.02 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions. .com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.Dual Band ALXC Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression. Average total (W) 870-960 / 1710-1880 16.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (7’1”x1’2”x10”) 16. Average per input (W) Power Handling. total power (dB) IM3. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. HxWxD Weight with Brackets Wind Load. Inc. Andrew Place Santa Ana. This technique minimizes intermodular distortion. The ALXC is available in a number of variants.4168. for each set of beamwidths.33. maximum efficiency. ALXC radiating elements are based on a patented dual band function that allowed designing an antenna matched for two or several frequency bands. with no need for diplex filters. while generating less loss and ensuring higher gain. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .04 Horizontal Beamwidth: 65° Gain: 16.00 Dual Band ALXC Antenna 65° 2. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies.5/16 dBi / 14.9 dBd Electrical Downtilt: 4° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dual band 900/1800 MHz antenna with outstanding performance characteristics.4/13. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dual band concept as an outstanding technique for enhancing system performance and cutting costs. Its outer radome is made of glassfiber reinforced polyester (GRP).0 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7331.11. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Typical Horizontal and Vertical 7331.5° >16 >-22/-22 >25 >21 >-150 300 600 Typical Horizontal and Vertical 7331.Dual Band ALXC Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. total power (dB) IM3. All Rights reserved. Inc. Andrew Place Santa Ana.powerwave. 1801 East St. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio.5:1 >30 <2 >11 65° +/-5 4° 9°/9° <0. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (6’6”x11”x5”) 13. ± 0.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (7’1”x1’2”x10”) 16.04 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions. Average total (W) 870-960 / 1710-1880 16. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5/16 14. Powerwave Technologies.5kg (36. Contact your Powerwave representative for complete performance data. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression. Frontal. . Inc.9 Dual linear slanted 50 <1.5 (dBi.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.4/13. Average per input (W) Power Handling. Powerwave Technologies.04 Patterns 925 MHz All specifications are subject to change without notice. HxWxD Weight with Brackets Wind Load. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4 lbs) D031-08150 Rev A Corporate Headquarters Powerwave Technologies. Inc. Powerwave. 2Tx@43dBm (dBc) Power Handling. This technique minimizes intermodular distortion. with no need for diplex filters. while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. for each set of beamwidths. The ALXC is available in a number of variants.00 Dual Band ALXC Antenna 65° 2.5/16 dBi/14. to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. maximum efficiency.4/13. Key Benefits • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .33. Its outer radome is made of glassfiber reinforced polyester (GRP). Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dual band concept as an outstanding technique for enhancing system performance and cutting costs.0 m X-polarized FET Antenna 870-960/1710-1880MHz Part Number: 7331. ALXC radiating elements are based on a patented dual band function that allowed designing an antenna matched for two or several frequency bands. while generating less loss and ensuring higher gain.9 dBd Electrical Downtilt: 6° Connector Type: 7/16 DIN female The Powerwave® ALXC is a dual-polarized dual band 900/1800 MHz antenna with outstanding performance characteristics.4168.06 Horizontal Beamwidth: 65° Gain: 16.11. total power (dB) IM3. 2Tx@43dBm (dBc) Power Handling. Inc. 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (6’6”x11”x5”) 13. Powerwave Technologies.5 (dBi.5/16 14.06 Patterns 925 MHz All specifications are subject to change without notice. Inc. . Frontal. Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Contact your Powerwave representative for complete performance data. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression. Powerwave.5kg (36.4 lbs) D031-08151 Rev A Corporate Headquarters Powerwave Technologies. HxWxD Weight with Brackets Wind Load. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5° >16 >-22/-22 >25 >21 >-150 300 600 Typical Horizontal and Vertical 7331. Average total (W) 870-960 / 1710-1880 16. 1801 East St.5:1 >30 <2 >11 65° +/-5 6° 9°/9° <0.06 Patterns 1805 MHz Mechanical Specifications Connector Type Dimensions.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Average per input (W) Power Handling.Dual Band ALXC Antenna 870-960/1710-1880 MHz Electrical Specifications Frequency band (MHz) Gain. ± 0.powerwave. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Inc.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (7’1”x1’2”x10”) 16. Andrew Place Santa Ana.4/13. All Rights reserved.9 Dual linear slanted 50 <1. Typical Horizontal and Vertical 7331. 00 Dual Broadband Antenna 65° 1.x0 Horizontal Beamwidth: 650 Electrical Downtilt: Adjustable Gain: 14. Available with Powerwave’s pre-mounted RET solution and upgradeable in field.1/15.4 dBd Connector Type: 7/16 DIN female 824-960/1710-2170 MHz The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology.2/17. This design ensures the highest possible cross-polar discrimination value. Key Benefits • Excellent broad. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles.4 m X-polarized MET Antenna Part Number: 7750.33.11. slim and robust design .and multi-band capabilities • Polarization purity maximizes diversity gain • Excellent pattern performance and high gain over frequency • Guaranteed passive intermodulation performance • Light. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.5 dBi/12. which provides high isolation performance and a wide VSWR bandwidth.4168. 8° <-25 >27 >24 <-153 <-160 250 500 1710-2170 17. 8° MET 0.8 kg (35 lbs) 435N (98 lbf) 70m/s (156 mph) DC grounded GRP Grey (RAL 7035 on all visible plastic part) Pre-mounted Standard Brackets 1550mm x 355mm x 255mm (61”x14”x10”) D031-08201 Rev A Corporate Headquarters Powerwave Technologies. 7750.18. Horizontal plane. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Contact factory for complete performance data.15. ±60° (dB) Tracking.1 Dual linear ±45° 50 1. 6. @2x43dBm (dBc) Average IM7. Frontal.5:1 1. All Rights reserved.40 . 6. ± 0. 1801 East St. Powerwave. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.16.0 0° to 8° 6.5dB (dBi)/(dBd) Polarization Nominal Impedance (Ohm) VSWR VSWR Isolation between inputs (dB) Isolation between inputs (dB) Inter band isolation (dB) Horizontal -3 dB beamwidth Tracking.00 . 2Tx@43dBm (dBc) Power Handling. Typical 1900 MHz Horizontal and Vertical Mechanical Specifications Connector Type Connector Position Dimensions. 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 7/16 DIN female.15. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. 2.10.16. . ±60° (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression.12° MET 1. Inc.5:1 30 30 40 69 ± 6° <1. 8. Average total (W) 824-960 14. 4.top Bottom 1408mm x 280mm x 125mm (4’7”x11”x5”) 15.powerwave.5/15. Inc.14 x=0.4 Typical 800 MHz Horizontal and Vertical 300 600 All specifications are subject to change without notice. 4.bottom. total power (dB) IM3. Average per input (W) Power Handling.0° > 18. 7750. Horizontal plane.3 ± 2.16.6 ± 1° > 18.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. HxWxD Weight Including Brackets Wind Load.17.2/12. Powerwave Technologies. @2x43dBm (dBc) IM3.Dual Broadband Antenna 824-960/1710-2170 MHz Electrical Specifications Frequency band (MHz) Gain. Andrew Place Santa Ana.0 2° to 12° 14.15 x=2.5° <-25 >27 >24 <-153 63 ± 7° <2. Key Benefits • Excellent broad.Dual Broadband Antenna 65° 2. The phase shifter technology.x0 Horizontal Beamwidth: 65° Gain: 15. Four connector ports allow separate tilts on each frequency band and ensure the use of diversity concepts.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN female The Powerwave dual band dual polarized broadband antenna has individual adjustable electrical downtilt per band. slim and robust design . which provides high isolation performance and a wide VSWR bandwidth.9/17. minimizes intermodulation distortion and maximizes efficiency. The antennas have superior radiation patterns due to a unique reflector design which provides a very small variation of the –3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light.0 m X-polarized MET Antenna 824-960/1710-2170 MHz Part Number: 7752.45° dual polarization system provides the independent fading signals needed for achieving top-quality coverage via diversity concepts. The slant +/. The Powerwave Broadband antenna design is based on a patented stacked aperture-coupled patch technology. based on a patented sliding dielectric. 1710-2170MHz. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 2Tx@43dBm (dBc) < -153 Average IM7.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.00 Patterns Mechanical Specifications Connector Type Connector Position Dimensions.8° First null-fill (dB) < -25 < -25 Front-to-back ratio (dB) >27 >27 Front-to-back ratio.top Bottom 2033mm x 280mm x 125mm (6’7” x 11”x 5”) 19.Horizontal plane.8° 0.40 . Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.00 . ±60° (dB) Electrical downtilt range (adjustable) 2° to 9° 0° to 8° 9. Contact your Powerwave representative for complete performance data. Average total (W) 600 500 Typical 800 MHz Horizontal and Vertical 7752.bottom.5 Polarization Dual linear ±45° Nominal Impedance (OHM) 50 VSWR. 4. Powerwave Technologies. 2Tx@43dBm (dBc) < -153 Average IM3.2 ± 1. Powerwave. Inc. Vertical 1 st upper (dB) > 17.16. Average per input (W) 300 250 Power Handling.Horizontal plane. ± 0. 8° MET x=0. total power (dB) >24 >24 Average IM3.00 Patterns All specifications are subject to change without notice.5 (dBi) 15.7kg (44lbs) 16kg (35lbs) 628N (141lbf) 70m/s (156mph) DC grounded GRP Light Gray 2175mm x 355mm x 255mm (7‘4"x14"x10") D031-08202 Rev A Corporate Headquarters Powerwave Technologies. 7752. 824-960MHz 1. Frontal. . 6.5:1 VSWR. 8° MET Vertical beam squint 0. 4. 1801 East St. Inc. 1710-2170MHz 1. HxWxD Weight Including Brackets Weigh Excluding Brackets Wind Load.13 dB x=2.powerwave. MHz (dB) 40 Horizontal -3 dB beamwidth 69 ± 6° 63 ± 7 ° Tracking. All Rights reserved. Andrew Place Santa Ana.0 Tracking.5:1 Isolation between inputs.6 ±1. Typical 1900 MHz Horizontal and Vertical 7752. 824-960MHz (dB) 30 Isolation between inputs. 1710-2170MHz (dB) 30 Inter band isolation. ±60° (dB) <1. 2Tx@43dBm (dBc) < -160 Power Handling.15.15.0° 6. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005. 2. Inc. 7752.0 <2.9 17. 6. 824-960MHz. 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size 7/16 DIN female.16.14 > 17.0° Vertical -3 dB beamwidth Sidelobe suppression.14.Dual Broadband Antenna 824-960/1710-2170 MHz Electrical Specifications Frequency band (MHz) 824-960 1710-2170 Gain. which provides high isolation performance and a wide VSWR bandwidth.11. The phase shifter technology.4168.00 Dual Broadband Antenna 65° 2.x0 Horizontal Beamwidth: 65o Gain: 17. The Powerwave Broadband antenna design is based on a patented stacked aperture-coupled patch technology. Key Benefits • Excellent broad. minimizes intermodulation distortion and maximizes efficiency. Four connector ports allow separate tilts on each frequency band and ensure the use of diversity concepts.5dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN female The Powerwave dual band dual polarized broadband antenna has individual adjustable electrical downtilt per band. slim and robust design .5/ 17. based on a patented sliding dielectric. The slant +/. The antennas have superior radiation patterns due to a unique reflector design which provides a very small variation of the –3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.45° dual polarization system provides the independent fading signals needed for achieving top-quality coverage via diversity concepts.6 m X-polarized MET Antenna 824-960/1710-2170 MHz Part Number: 7755.and multi-band capabilities • Polarization purity makes good diversity gain • Excellent pattern performance and high gain over frequency • High passive intermodulation performance • Light.33. ±60° Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression.powerwave. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.Horizontal plane.5 Typical Horizontal and Vertical 7755. 1710-2170MHz.8° < -25 >30 >25 >11 -153 -160 250 500 1710-2170 17. HxWxD Wind Load.Dual Broadband Antenna 824-960 / 1710-2170 MHz Electrical Specifications Frequency band (MHz) Gain. ± 0. Inc. 824-960MHz (dB) Isolation between inputs. All Rights reserved. Average total (W) 824-960 17. Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio. Powerwave Technologies.0dB 2° to 8° 6° > 17 @2° MET 0. 1710-2170MHz Isolation between inputs. 824-960MHz.8° < -25 > 28 >25 >11 -150 65° <1. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5:1 1.5 Dual linear ±45° 50 1. 1801 East St.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR. 2Tx@43dBm (dB) Average IM7. Inc. Typical Horizontal and Vertical 7755. 100 mph Cd=1 (N) Weight With Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female. Powerwave Technologies. . 7755.top Bottom 2630x280x125mm (8‘8"x11“x5”) 868N (195 lbf) 19.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.6 kg (43 lbs) 70m/s (156 mph) DC grounded PVC Light Gray 2830x355x255mm (9‘4"x1’2"x10") 23. 1710-2170MHz (dB) Inter band isolation. 7755. Andrew Place Santa Ana.Horizontal plane. Powerwave.bottom. Frontal. 2Tx@43dBm (dB) Average IM3. total power (dB) Cross-polar discrimination (XPD) ±60° (dB) Average IM3.00 850 MHz Band Patterns 300 600 All specifications are subject to change without notice. 2Tx@43dBm (dB) Power Handling.00 .40 .3 kg (52 lbs) D031-08203 Rev A Corporate Headquarters Powerwave Technologies. ±60° Tracking. MHz (dB) Horizontal -3 dB beamwidth Tracking.5dB 0° to 8° 6° > 17 @2° MET 0. 824-960MHz VSWR. Inc. Average per input (W) Power Handling. Contact your Powerwave representative for complete performance data.5:1 30 30 38 65° <2. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.00 1900 MHz Band Patterns Mechanical Specifications Connector Type Connector Position Dimensions. [email protected] (27) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (61"x1'2"x10") Light Grey 21. Please contact your Powerwave representative for complete performance data.00. without brackets.16. 824 .5 (47.4 Dual linear ±45° MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions. frontal/lateral/rear side 42 m/s Cd=1.4.16.Dual Broadband Antennas 7770.00A DBB90 Broadband Cross Polarized ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width.5.4 Dual linear ±45° 50 <1.5/13.6 (39) 12. m/s (mph) Survival wind speed.6 (N) 7/16 DIN Female Bottom 1408x280x125mm Pre-mounted heavy duty brackets 17. 15. -3 dB (°) Electrical down tilt (°) Side lobe suppression.2170 MHz 73 . 7454. kg (lbs) Weight. average total (W) <2. 7033. vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking. horizontal plane ±60° (dB) First null fill (dB) Vertical beam squint (°) Front to back ratio (dB) Front to back ratio.00.5/13.4.4m (4'7") 1710-2170 1850-1990 15. -3 dB (°) Vertical beam width.5 >25 >25 15 >10 NA 30 90 15 824-896 PRELIMINARY 824-960 880-960 13.4) 7020.17x@0. mm (ft) Radome colour Shipping weight.8° 30 90 9. total power (dB) Cross polar discrimination (XPD) 0° (dB) Cross polar discrimination (XPD) ±60° (dB) Far field coupling IM3.17.00 7256. with [email protected]/11.5:1 90 15 0 to 10 >18.4. m/s (mph) Lightning protection Radome material Packet size. kg (lbs) RET Brackets *All specifications subject to change without notice.5/13.00.4 TILT: MET LENGTH: 1.960 MHz 1710 [email protected] >25 >25 15 >10 NA <-153 <-160 250 600 <2.4 POLARIZATION: X-Pol FREQUENCY (MHz): 824-960.5/11.0 <-25 0.com/antennapatterns.16. 2210.17x@0. 1710-2170 HORIZONTAL BEAM WIDTH (°): 90 GAIN (dBi/dBd): 13. HxWxD.5/13.8° 30 90 7 1710-1880 15.5 >25 >25 15 >10 NA >18. kg (lbs) Wind load. 7031.5/11.0 <-25 0. mm (ft) Mounting Weight.00.4 13.5 1900-2170 15. average per input (W) Power handling.4. ANTENNA PATTERNS* For detailed patterns visit www.5 >25 >25 15 >10 NA >18. 7032.0 <-25 0.10° 30 >18.10° 40 <2.5.5 >25 >25 15 >10 NA <-153 NA 300 600 <2.8° 30 40 <2.17. 2xTx@43dBm (dBc) IM7.0 <-25 0.powerwave. HxWxD.asp.4 50 <1.10 Maximum operational wind speed.5:1 90 7 0 to 8 >18.0 <-25 0. 2xTx@43dBm (dBc) Power handling. m/s (mph) Lightning protection Radome material Packet size.0m (6'6") 1710-2170 1850-1990 16/13.00.960 MHz 1710 . 2xTx@43dBm (dBc) Power handling.00. Please contact your Powerwave representative for complete performance data.5) 7020.8° 30 >[email protected]. ANTENNA PATTERNS* For detailed patterns visit www.0 <-25 0.com/antennapatterns.00. without brackets.9 0 to 7 >17.16.4.0 <-25 0.0 <-25 0. 2210. mm (ft) Radome colour Shipping weight.8° 30 90 7 1710-1880 16/13.8° 30 40 <2.0 <-25 0.8° 30 90 7 1900-2170 16/13.16.powerwave.4. total power (dB) Cross polar discrimination (XPD) 0° (dB) Cross polar discrimination (XPD) ±60° (dB) Far field coupling IM3. 1710-2170 HORIZONTAL BEAM WIDTH (°): 90 GAIN (dBi/dBd): 15/12.14. vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) [email protected] (44) 16. 2xTx@43dBm (dBc) IM7.14.00 7256.9 TILT: MET LENGTH: 2.5 >25 >25 15 >10 NA >17.5 824-896 15/12.9 Dual linear ±45° MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions. -3 dB (°) Electrical down tilt (°) Side lobe suppression. 7031. HxWxD. horizontal plane ±60° (dB) First null fill (dB) Vertical beam squint (°) Front to back ratio (dB) Front to back ratio.14. average per input (W) Power handling.9 Dual linear ±45° 50 <1. 7032.5:1 90 8. average total (W) <2.5 >25 >25 15 >10 NA >15.0 (35) 1375 42 (93) 55 (123) DC grounded GRP 2175x355x255 (7'2"x14"x10") Light Grey 27 (59.10 Maximum operational wind speed. frontal/lateral/rear side 42 m/s Cd=1.5 >25 >25 15 >10 NA 30 90 9.00A DBB90 Broadband Cross Polarized ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width. 824 .5:1 90 7 0 to 8 >15.8° 40 <[email protected]@0.00. with brackets.00.asp. kg (lbs) RET Brackets *All specifications subject to change without notice. 7033. m/s (mph) Survival wind speed.4. 7454.2170 MHz 74 .5 >25 >25 15 >10 NA <-153 <-160 250 500 <2.9 POLARIZATION: X-Pol FREQUENCY (MHz): 824-960. kg (lbs) Weight. mm (ft) Mounting Weight. 16/13.13x@0. -3 dB (°) Vertical beam width.0 <-25 0.5 >25 >25 15 >10 NA <-153 NA 300 600 <2. HxWxD.Dual Broadband Antennas 7772.6 (N) 4 x 7/16 DIN Female Bottom 2033x280x125mm Pre-mounted heavy duty brackets 19.9 50 <1. kg (lbs) Wind load.9 PRELIMINARY 824-960 880-960 15/12. 5 >25 >25 15 >10 NA <-150 NA 300 600 <2.3. horizontal plane ±60° (dB) First null fill (dB) Vertical beam squint (°) Front to back ratio (dB) Front to back ratio.16.9 Dual linear ±45° MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions.13x@0. 2210.5 >25 >25 15 >10 NA >16.0 <-25 0.0 <-25 0. 7032.4.6° 30 >16.6 (N) 4 x 7/16 DIN Female Bottom 2658x280x125mm Pre-mounted heavy duty brackets 25.9.15x@0. 824 . ANTENNA PATTERNS* For detailed patterns visit www.1 (55) 19.6) 7020.15.3.2170 MHz 75 . with brackets.8° 30 40 <2.00A DBB90 Broadband Cross Polarized ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width.6m (8'6") 1710-2170 1850-1990 16/13. 2xTx@43dBm (dBc) IM7.0 <-25 0.5:1 90 7 0 to 8 >16. 16/13.5 ([email protected]:1 90 7 0 to 6 >17.8° 30 90 7 1710-1880 16/13.9 Dual linear ±45° 50 <1. kg (lbs) Wind load.15.10 7256. 7454. 7031.6 (43) 1797 42 (93) 55 (123) DC grounded GRP 2800x355x255 (9'2"x1'2"x10") Light Grey 32.9 POLARIZATION: X-Pol FREQUENCY (MHz): 824-960.9 PRELIMINARY 824-960 880-960 16/13. Please contact your Powerwave representative for complete performance data. -3 dB (°) Electrical down tilt (°) Side lobe suppression.9 50 <1. HxWxD. -3 dB (°) Vertical beam width.9 TILT: MET LENGTH: 2.com/antennapatterns. without brackets. mm (ft) Radome colour Shipping weight.00.8° 30 90 7 1900-2170 16/13.5 >25 >25 15 >10 NA <-150 <-160 250 500 <2. m/s (mph) Lightning protection Radome material Packet size. vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking. average total (W) <2.00. 7033.4.6° 40 <2.10 Maximum operational wind speed.00.960 MHz 1710 .00. kg (lbs) Weight. HxWxD.5 >25 >25 15 >10 NA 30 90 7 824-896 16/13. 2xTx@43dBm (dBc) Power handling. m/s (mph) Survival wind speed.powerwave.0 <-25 0.16.Dual Broadband Antennas 7775.15. kg (lbs) RET Brackets *All specifications subject to change without notice.5 >25 >25 15 >10 NA >17. total power (dB) Cross polar discrimination (XPD) 0° (dB) Cross polar discrimination (XPD) ±60° (dB) Far field coupling [email protected]. frontal/lateral/rear side 42 m/s Cd=1. average per input (W) Power handling.00. mm (ft) Mounting Weight.asp.13x@0. 1710-2170 HORIZONTAL BEAM WIDTH (°): 90 GAIN (dBi/dBd): 16/13.0 <-25 0. Triple Broadband Antenna 65° 1. Cd=1.4 m XXX-polarized MET Antenna 824-960/2x1710-2170 MHz Part Number: 7780. Mechanical Specifications Connector type (6 pcs) Connector position Dimensions. 150 km/h. excluding brackets 3.00 Horizontal Beamwidth: 65o Gain: 14. frontal. these antennas include the Powerwave patented Manually-adjustable Electrical Tilt (MET) function. HxWxD Weight. Finally.5kg Wind load.and UMTS 2100 MHzbands.5 / 14. The Powerwave Triband antenna design is based on a patented stacked aperturecoupled patch technology for GSM 900-. such as space and installation issues as well as those of co-siting in demanding radio environments. GSM1800.8 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 female The triple band solution from Powerwave offers a flexible antenna option for operators seeking excellent RF-performance as well as fast and successful rollout of their next-generation networks. Designed to overcome UMTS deployment challenges. the advanced reflector and element structure in combination with a superior feeding network minimizes the weight and maximizes the overall performance of the antenna. (N) Operating wind speed (m/s) Survival wind speed (m/s) Weatherproofing Radome material Radome colour Packing size HxWxD (mm) Shipping weight including bracket kit Mounting 7/16 female Bottom 1400 x 280 x 125mm ( 4' 7''x 11"x 5") 15kg ( 33lbs ) 428 55 70 According to T1102 GRP RAL 7035 on all visible plastic parts 1650 x 355 x 200mm ( 5' 5"x1' 2"x 8") 20kg (44lbs) Pre-mounted standard brackets . which offers operators flexibility in tuning antenna systems as well as logistical advantages. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.0dB 38 65° ± 5° 62° ± 5° 1900-2170 14.5:1 1. 14 X=0. 2Tx@43dBm (dBm) (dBc) Power Handling.powerwave. 880-960 MHz. 1710-1880 MHz Isolation between inputs (dB). Horizontal plane. 12° MET >10 1° >30 >25 >11 -153 300 600 250 500 -160 250 500 All specifications are subject to change without notice. Horizontal plane. 824-960 MHz VSWR. All Rights reserved.5:1 30 30 >30 >30 68° ± 5° <2. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.5:1 1710-1880 14. Total Power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. . 12° MET >10 1° >30 >25 >10 2° to12° 14°±2° >17. 16. 2Tx@43dBm (dBm) (dBc) IM3. 4. Horizontal plane. 8. Powerwave Technologies.5 dual linear ±45° 50 1.Triple Broadband Antenna 824-960/2x1710-2170 MHz Electrical Specifications Frequency band.4 dual linear ±45° 50 1. 4. 14 X=0. 15. 15. 15. Inc. Vertical 1stupper (dB) Side lobe suppression. 1710-1880 MHz VSWR. Andrew Place Santa Ana. ±60° Tracking. 824-896 MHz. Horizontal plane. Powerwave. Average per input (W) Power Handling. ±60° Electrical down tilt range (adjustable) Vertical Beam width -3dB MHz Side lobe suppression. Inc.5(dBi) Polarization Nominal impedance (W) VSWR. 824-960 MHz Isolation between inputs (dB). 900MHz 1800MHz 2100MHz D031-08210 Rev A Corporate Headquarters Powerwave Technologies. 1900-2025 MHz. 8. 1801 East St. Powerwave Technologies. Contact your Powerwave representative for complete performance data. 4. 1710-1880 MHz. ±60° Tracking. 8. ±60° Tracking. 1900-2025 MHz Isolation between inputs (dB). all bands (dB) Horizontal -3dB beam width Tracking. 16. 1900-2025MHz VSWR. Average total (W) 824-960 14.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Horizontal plane. Vertical Upper (dB) Vertical beam squint Front-to-back Ratio (dB) Front-to-back Ratio. 2110-2170MHz Isolation between inputs (dB). 2110-2170 MHz Inter band isolation. 2Tx@43dBm (dBm) (dBc) IM7.5:1 1. 14 X= 2. ±60° Tracking.8 dual linear ±45° 50 <1.5dB 0° to12° 13°±1° >17. 16. MHz Gain ± 0.0dB <2. Inc.5dB <1. 2110-2170 MHz. 12° MET >10 1° >28 >25 >11 -153 0° to12° 14°±1° >17.5dB <1. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. (N) Operating Wind Speed (M/s) Survival Wind Speed (M/s) Lightning Protection Weatherproofing Radome Material Radome Color Packing Size Hxwxd (Mm) Shipping Weight Including Bracket Kit Mounting 7/16 DIN female Bottom 2033 x 280 x 125mm ( 7' 1''x 11"x 5") 18kg ( 40lbs ) 21. Designed to overcome UMTS deployment challenges. Finally. these antennas include the Powerwave patented Manually-adjustable Electrical Tilt (MET) function.5kg (51 lbs) Pre-mounted standard brackets . GSM 900-. HxWxD Weight. Mechanical Specifications Connector Type (6 Pcs) Connector Position Dimensions. The Powerwave Triband antenna design is based on a patented stacked aperturecoupled patch technology for cellular 800.00 Horizontal Beamwidth: 65° Gain: 16. GSM1800. PCS 1900 and UMTS 2100 MHz-bands. such as space and installation issues as well as those of co-siting in demanding radio environments.0 m XXX-polarized MET Antenna 824-960/2x1710-2170 MHz Part Number: 7782.8 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN female The triple band solution from Powerwave offers a flexible antenna option for operators seeking excellent RF-performance as well as fast and successful rollout of their next-generation networks. the advanced reflector and element structure in combination with a superior feeding network minimizes the weight and maximizes the overall performance of the antenna.5kg Wind Load. Excluding Brackets 3. Frontal.5kg (47 lbs with brackets) 628 55 (123 mph) 70 (156 mph) DC-grounded According to T1102 GRP RAL 7035 on all visible plastic parts 2175x355x255 23. Cd=1.Triple Band Antenna 65° 2.5 / 16. 150 km/h. which offers operators flexibility in tuning antenna systems as well as logistical advantages. Inc. 2110-2170 MHz. Contact your Powerwave representative for complete performance data. 1900-2025 MHz.8° > 30 > 27 > 10 QUALITY AND RELIABILITY 300 600 250 500 < -160 250 500 All specifications are subject to change without notice. Vertical Upper (dB) Vertical beam squint Front-to-back Ratio (dB) Front-to-back Ratio.1850-1990 16. Inc. 2Tx@43dBm (dBc) Power Handling.5dB < 2.5dB 2° to 9° 9° ± 1° >17.5 dual linear ±45° 50 1. Horizontal plane. Inc.0dB 0° to 10° 9° ±1° > 18.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 2110-2170MHz Isolation between inputs (dB). Vertical 1st upper (dB) Side lobe suppression.0dB < 1. ±60° Tracking.5 dual linear ±45° 50 1. 824-896 MHz. Powerwave. 1710-1880 MHz. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005. 1710-1880 MHz VSWR. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. all bands (dB) Horizontal -3dB beam width Tracking. 1710-1880 MHz Isolation between inputs (dB). 1900-2025MHz VSWR.5dBi Polarization Nominal impedance (Ohm) VSWR.5:1 1. 13 @ 2. MHz Gain ± 0. Andrew Place Santa Ana. 1900-2025 MHz Isolation between inputs (dB).0dB > 34 65° 64° NETWORK OPTIMIZATION TECHNOLOGY LEADERSHIP 1990-2025. 15 @ 0. 2110-2170 16. Horizontal plane. ±60° Tracking. 850MHz & 900MHz 1800MHz & 1900MHz 2100MHz D031-08211 Rev A Corporate Headquarters Powerwave Technologies.5:1 > 30 > 30 > 30 > 30 67° < 1. ±60° Electrical down tilt range (adjustable) Vertical Beam width -3dB MHz Side lobe suppression. 824-960 MHz Isolation between inputs (dB). 1801 East St. 824-960 MHz VSWR. 2110-2170 MHz Inter band isolation. 2Tx@43dBm (dBc) IM3. 880-960 MHz.Triple Band Antenna 824-960/2x1710-2170 MHz Electrical Specifications Frequency Band.8 dual linear ±45° COVERAGE AND CAPACITY 50 < 1. Powerwave Technologies. Horizontal plane. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. . Horizontal plane.13 @ 0. All Rights reserved.powerwave. Powerwave Technologies.9° MET > 11 < 0. Horizontal plane. ±60° Tracking. Average per input (W) Power Handling. Total Power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3.8° > 30 > 27 > 10 < -153 < 1. 10° MET > 10 < 0. 2Tx@43dBm (dBc) IM7.8° > 30 > 27 > 11 < -153 0° to10° 10° ±1° >15 . Average total (W) 824-960 16.5:1 1710-1880. ±60° Tracking.10° MET > 12 < 0.5:1 1. which offers operators flexibility in tuning antenna systems as well as logistical advantages. HxWxD Weight.00 Horizontal Beamwidth: 65° Gain: 17.6 m XXX-polarized MET Antenna 824-960/2x1710-2170 MHz Part Number: 7785.4 / 17. Frontal.5 lbs with brackets) 820 55m/s (123 mph) 70m/s (156 mph) DC-grounded According to T1102 GRP RAL 7035 on all visible plastic parts 2790 x 355 x 200mm ( 9' 2"x1' 2"x 8") 29kg (64lbs) Pre-mounted standard brackets . the advanced reflector and element structure in combination with a superior feeding network minimizes the weight and maximizes the overall performance of the antenna. (N) Operating Wind Speed Survival Wind Speed Lightning Protection Weatherproofing Radome Material Radome Color Packing Size Hxwxd (Mm) Shipping Weight Including Bracket Kit Mounting 7/16 DIN female Bottom 2650 x 280 x 125mm ( 8' 8''x 11"x 5") 24kg ( 53lbs ) 27.5kg (60. Excluding Brackets 3.5kg Wind Load. Designed to overcome UMTS deployment challenges. GSM 900-. GSM1800. Finally. 150 km/h.Triple Broadband Antenna 65° 2. these antennas include the Powerwave patented Manually-adjustable Electrical Tilt (MET) function. Cd=1. The Powerwave Triband antenna design is based on a patented stacked aperturecoupled patch technology for cellular 800.5 dBi Electrical Downtilt: Adjustable Connector Type: 7/16 DIN female The triple band solution from Powerwave offers a flexible antenna option for operators seeking excellent RF-performance as well as fast and successful rollout of their next-generation networks. Mechanical Specifications Connector Type (6 Pcs) Connector Position Dimensions. such as space and installation issues as well as those of co-siting in demanding radio environments. PCS 1900 and UMTS 2100 MHz-bands. 1710-1880 MHz. Contact your Powerwave representative for complete performance data. Horizontal plane. 2Tx@43dBm (dBm) (dBc) IM3. 1900-2025MHz VSWR.1850-1990 17.5:1 1710-1880. all bands (dB) Horizontal -3dB beam width Tracking. All Rights reserved. 1900-2025 MHz.5dB 0° to 8° 6° >17 @ 0 ° MET >10 0. Andrew Place Santa Ana. 824-960 MHz Isolation between inputs (dB). 1710-1880 MHz Isolation between inputs (dB). Horizontal plane.5 >30 >25 >10 2° to 8° 7° >17 @ 2 ° MET >10 0. Powerwave Technologies. Powerwave Technologies. Powerwave.5 dual linear ±45° 50 COVERAGE AND CAPACITY <1. 1801 East St. 2110-2170 MHz. Average per input (W) Power Handling.5dB <1.4 dual linear ±45° 50 1. 850MHz & 900MHz 1800MHz & 1900MHz 2100MHz D031-08212 Rev A Corporate Headquarters Powerwave Technologies. ±60° Tracking.Triple Broadband Antenna 824-960/2x1710-2170 MHz Electrical Specifications Frequency Band.powerwave. Inc. 2Tx@43dBm (dBm) (dBc) IM7. Horizontal plane.0dB <2. . CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 824-896 MHz. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005.5dBi Polarization Nominal impedance (Ohms) VSWR. Horizontal plane. ±60° Tracking. Vertical 1st upper (dB) Side lobe suppression. 824-960 MHz VSWR.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Vertical Upper (dB) Vertical beam squint Front-to-back Ratio (dB) Front-to-back Ratio.5:1 1. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 >30 >25 >11 -153 300 600 250 500 -160 250 500 QUALITY AND RELIABILITY All specifications are subject to change without notice.0dB 38 65° 62° NETWORK OPTIMIZATION TECHNOLOGY LEADERSHIP 1990-2170 17. 1710-1880 MHz VSWR.2 dual linear ±45° 50 1. Inc. Horizontal plane. 2Tx@43dBm (dBm) (dBc) Power Handling. Total Power (dB) Cross-polar discrimination (XPD) ±60° (dB) IM3. MHz Gain ± 0. ±60° Tracking. ±60° Tracking. Average total (W) 824-960 17.5:1 1.5:1 30 30 >30 >30 65° <2. ±60° Electrical down tilt range (adjustable) Vertical Beam width -3dB MHz Side lobe suppression. 880-960 MHz.5dB <1. 2110-2170MHz Isolation between inputs (dB). 1900-2025 MHz Isolation between inputs (dB). Inc.5 >25 >20 >11 -153 0° to 8° 7° >17 @ 0° MET >10 0. 2110-2170 MHz Inter band isolation. well-controlled radiation patterns throughout the system’ s entire frequency band.11. Key Benefits: • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .33. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds.4168.00 Omni Antenna 360º 3.00 The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. The cabling inside the tube combines with sophisticated.33.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360º Gain: 11 dBi / 8. compact technology to ensure stable.11.9 dBd Electrical Downtilt: 0o Connector Type: 7/16 DIN female 872-960 MHz Part Number: 4168. HxWxD Wind Load. Powerwave Technologies.00 Patterns All specifications are subject to change without notice.5° <-146 872-960 MHz Typical Horizontal and Vertical 4168. Inc.11. .00 REV.powerwave. Andrew Place Santa Ana.com ©Copyright September 2003. Frontal. Inc.Omni Antenna Electrical Specifications Frequency band (MHz) Gain. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.33. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PN7722. 2Tx@43dBm (dBc) 872-960 11 8. All Rights reserved. Inc.3dB Beamwidth Vertical beam squint IM3. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 0. Powerwave Technologies.9 Linear vertical 50 <1. 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (9‘10"x3") 300N 70 m/s (156 mph) < 1° DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs) Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. ± 0.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical . Powerwave.2 Corporate Headquarters Powerwave Technologies.4:1 360° 0° 6. Contact your Powerwave representative for complete performance data. 1801 East St. Mechanical Specifications Connector Type Connector Position Dimensions. Key Benefits: • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance .33. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. compact technology to ensure stable.33.4168.11.11.00 Omni Antenna 360º 3. The cabling inside the tube combines with sophisticated.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360º Gain: 11 dBi / 8.02 The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. well-controlled radiation patterns throughout the system’ s entire frequency band.9 dBd Electrical Downtilt: 2o Connector Type: 7/16 DIN female 872-960 MHz Part Number: 4168. Inc.powerwave.5° <-146 872-960 MHz Typical Horizontal and Vertical 4168.00 REV 2 Corporate Headquarters Powerwave Technologies. Powerwave Technologies. 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (9‘10"x3") 300N 70 m/s (156 mph) < 1° DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs) PN7722. Contact your Powerwave representative for complete performance data.9 Linear vertical 50 <1. All Rights reserved. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. ± 0.3dB Beamwidth Vertical beam squint IM3. Frontal.11. Inc. 2Tx@43dBm (dBc) 872-960 11 8.33. 1801 East St.02 Patterns All specifications are subject to change without notice. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4:1 360° 2° 6. .com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Andrew Place Santa Ana.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical . HxWxD Wind Load. Mechanical Specifications Connector Type Connector Position Dimensions. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.5 0. Inc. Powerwave Technologies. Powerwave.Omni Antenna Electrical Specifications Frequency band (MHz) Gain. 9 dBd Electrical Downtilt: 3o Connector Type: 7/16 DIN female 872-960 MHz Part Number: 4168. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds.33.11.33.4168.03 The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. The cabling inside the tube combines with sophisticated.11.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360º Gain: 11 dBi / 8. Key Benefits: • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance . well-controlled radiation patterns throughout the system’ s entire frequency band.00 Omni Antenna 360º 3. compact technology to ensure stable. 9 Linear vertical 50 <1.33.00 REV. .11.4:1 360° 3° 6. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.3dB Beamwidth Vertical beam squint IM3. HxWxD Wind Load.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc.5° <-146 872-960 MHz Typical Horizontal and Vertical 4168. 2Tx@43dBm (dBc) 872-960 11 8.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical . Inc. Andrew Place Santa Ana. 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (9‘10"x3") 300N 70 m/s (156 mph) < 1° DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs) PN7722. All Rights reserved. ± 0. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. 1801 East St. Inc. Mechanical Specifications Connector Type Connector Position Dimensions. Contact your Powerwave representative for complete performance data. Powerwave.Omni Antenna Electrical Specifications Frequency band (MHz) Gain.03 Patterns All specifications are subject to change without notice. 2 Corporate Headquarters Powerwave Technologies.powerwave. Powerwave Technologies.5 0. Frontal. Powerwave Technologies. 33. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. The cabling inside the tube combines with sophisticated.06 Patterns .11.0 m vertical-polarized FET Antenna Part Number 4168.06 Horizontal Beamwidth: 360° Gain: 11 dBi Electrical Downtilt: 6° Connector Type: DIN 900 MHz Powerwave Technologies’ Omni directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube.900 MHz Omni Antenna 360° 3. well-controlled radiation patterns throughout the system’ s entire frequency band. compact technology to ensure stable.11. 900 MHz Omni Antenna Typical Horizontal and Vertical 4168.33. powerwave.33. HxWxD Wind Load. Contact factory for complete performance data. 1801 East St.5° 500 < -146 NETWORK OPTIMIZATION TECHNOLOGY LEADERSHIP COVERAGE AND CAPACITY 900 MHz Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Vertical beam squint Maximum input power (W) IM. ± 0.5° 6° 0. . Radiation patterns are typical for the antenna.11. Corporate Headquarters Powerwave Technologies. Powerwave Technologies. Inc.5 (dBi) Nominal Impedance (Ohm) VSWR 872-960 Linear vertical 11 50 <1. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PN 4168.06 REV. 42 m/s Cd=1 (N) Survival Wind Speed WindDdeflection 35 m/s LightningPprotection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (9‘10"x3") 300 70 m/s (156 mph) < 1° DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs) Comments: Gain is typical within frequency band. Powerwave Technologies.1 Tel: 714-466-1000 Fax: 714-466-5800 www. Antenna is delivered with brackets pre-mounted* Radome color is NCS 2502-B (RAL 7035). Inc. Inc.4:1 360° 6. Shipping weight including tilt brackets. 2Tx@43 dBm (dBc) All specifications are subject to change without notice.com ©Copyright February 2003. 3rd order. Powerwave. QUALITY AND RELIABILITY Mechanical Specifications Connector Type Connector Position Dimensions. Andrew Place Santa Ana. Frontal. All Rights reserved. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.900 MHz Omni Antenna Electrical Specifications Frequency Range (MHz) Polarization Gain. 33.52 The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube.11.00 Omni Antenna 360º 3.4168. well-controlled radiation patterns throughout the system’ s entire frequency band. The cabling inside the tube combines with sophisticated.33. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. Key Benefits: • High gain performance • Light and slim design • Robust and reliable • Pre-mounted brackets • Guaranteed passive intermodulation performance . compact technology to ensure stable.9 dBd Electrical Downtilt: 2° upside down Connector Type: 7/16 DIN female 872-960 MHz Part Number: 4168.11.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360º Gain: 11 dBi / 8. Omni Antenna Electrical Specifications Frequency band (MHz) Gain. Frontal. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Contact your Powerwave representative for complete performance data. Inc.5 0.52 Patterns All specifications are subject to change without notice. All Rights reserved. 1801 East St.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical .33.3dB Beamwidth Vertical beam squint IM3.4:1 360° 2° upside down 6. ± 0. 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (9‘10"x3") 300N 70 m/s (156 mph) < 1° DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs) D031-08111 Rev A Corporate Headquarters Powerwave Technologies.5° <-146 872-960 MHz Typical Horizontal and Vertical 4168. 2Tx@43dBm (dBc) 872-960 11 8.11. Powerwave.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies.9 Linear vertical 50 <1. Inc. Mechanical Specifications Connector Type Connector Position Dimensions. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Andrew Place Santa Ana. HxWxD Wind Load. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. . Easy-to-install multiband antennas from Powerwave are deployed in numerous wireless networks worldwide.00 Horizontal Beamwidth: 360° Gain: 3 dBi/ 0. Using fewer antennas of discreetly functional design beats using numerous antennas of provocative size and appearance especially with today’s aesthetic concerns.00 Multi-band Indoor Antenna Omni Vertical polarized Antenna 800-2500 MHz Part Number: 7336. today. All have endured extensive field trials in close collaboration with cell planners and other communications providers to ensure Powerwave multi-band antennas perform to expectations.33.4168. Key Benefits: • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance .9 dBd Electrical Downtilt: 0° Connector Type: N female Powerwave multi-band solutions provide substantial savings in overall cost because they require less equipment and maintenance and shorter installation times while offering lower site costs. Considering multi-band network potential. what you’re really doing is preparing for the future.11. Powerwave.5:1 360° 70° 0° <-150 40 Typical Horizontal 7336. Contact your Powerwave representative for complete performance data.44lbs) White 210 x 200 x 115mm (8"x8"x5") 0.9 Vertical 50 <1. Powerwave Technologies.5”) 185 mm (7”) 0. ± 0.Multi-band Indoor Antenna Electrical Specifications 800-2500 MHz Frequency band (MHz) Gain. .8lbs) D031-08158 Rev A Corporate Headquarters Powerwave Technologies. All Rights reserved.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5 (dBi/dBd) Polarization Nominal Impedance (Ohm) VSWR Beam width: Ceiling Mounted Beam width: Wall Mounted Electrical downtilt IM3.powerwave. Andrew Place Santa Ana. Inc. 1801 East St. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Inc. Inc. Mechanical Specifications Connector Type Depth Diameter/Width (mm) Weight Radome Color Packing Size Shipping weight N female 65 mm (2. Average total (W) 800-2500 3/0.36 kg (0. 2Tx@43dBm (dBc) Power Handling.00 Pattern All specifications are subject to change without notice. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.2 kg (0. 33. Using fewer antennas of discreetly functional design beats using numerous antennas of provocative size and appearance especially with today’s aesthetic concerns. Key Benefits: • Light and slim design • Robust and reliable • Guaranteed passive intermodulation performance .00 Multi-band Indoor Antenna Vertical polarized Antenna 800-2500 MHz Part Number: 7336. All have endured extensive field trials in close collaboration with cell planners and other communications providers to ensure Powerwave multi-band antennas perform to expectations. today.9 dBd Electrical Downtilt: 0° Connector Type: N female Powerwave multi-band solutions provide substantial savings in overall cost because they require less equipment and maintenance and shorter installation times while offering lower site costs. Easy-to-install multiband antennas from Powerwave are deployed in numerous wireless networks worldwide.10 Horizontal Beamwidth: 90°/70° Gain: 6/9 dBi/ 3. what you’re really doing is preparing for the future.9/6. Considering multi-band network potential.11.4168. powerwave. 1801 East St. Contact your Powerwave representative for complete performance data.9 - 800-2500 1710-2100 <1.5:1 6/3. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Inc.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave. Inc.2 kg (2.10 Pattern All specifications are subject to change without notice.9 90° 890-960 <1. .8:1 9/6. Powerwave Technologies. ± 0. Inc.2lbs) White 240 x 280 x 45 mm (9"x11"x2") 1. Mechanical Specifications Connector Type Dimensions (LxWxD) Weight Radome Color Packing Size Shipping weight N female 210 x 180 x 42 mm (8"x7"x2") 1. Powerwave Technologies.9:1 9/6. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. All Rights reserved.9 70° 0° Vertical 50 50 <-150 65° 2100-2500 <1.9 - Typical Horizontal and Vertical 7336.6lbs) D031-08159 Rev A Corporate Headquarters Powerwave Technologies. Andrew Place Santa Ana.5 (dBi/dBd) Beam width: Ceiling Mounted Beam width: Wall Mounted Electrical downtilt Polarization Power Handling.9:1 6/3. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.Multi-band Indoor Antenna Electrical Specifications 800-2500 MHz Frequency band (MHz) Frequency range (MHz) VSWR Gain. 2Tx@43dBm (dBc) 90° 806-890 <1. Average total (W) Nominal Impedance (Ohm) IM3.0 kg (2. The unit has dual RS-485 connectors for easy daisy chaining without the need for an external splitter. Key Benefits: • • • • Field upgradeable with installed MET antennas Optional factory pre-mounting on MET antennas Integrated RS-485 splitter for easy daisy chaining Field proven vented design Single Band Module .Single Band RET Module Single Band Remote Controlled Electrical Down-Tilt (RET) RET Technology Part Number: 7010. The unit can be mounted on site on an antenna that is already in place or can be delivered already mounted on a Powerwave antenna. the stepping motor moves the positioning rod up or down to achieve the desired antenna tilt angle. Upon command from the MCU.00 Easy configuration AISG Compatible Outdoor Usage The Single Band RET Unit is part of the Powerwave RET Technology and consists of a stepping motor that can be connected to the positioning rod used for adjusting the electrical down tilt of Powerwave MET antennas. Single Band RET Module RET Technology Technical Specifications Product Number Power supply Current consumption Start up surge Current draw during Antenna tilting 7010.00 +9 to+30V < 1mC < 500 mA at Vin <10V < 400 mA at Vin <19V < 250 mA at Vin >19V < 100 mA at Vin <19V < 50 mA at Vin >19V 9.6 kbps, 38.4kbps <± 0.8 mm 1 kg < 62 X 78 X 216 IEC 60130-9 (Ed. 3.0) M6 screw -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG. >500.000 hrs. IP65 ETSI 300 019 QUALITY AND RELIABILITY All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. NETWORK OPTIMIZATION COVERAGE AND CAPACITY TECHNOLOGY LEADERSHIP All other operational states AISG Data Rate Rod positioning accuracy Weight Dimensions (W,L,H) (mm) Connectors AISG output/ input Protection Ground Operation temperature range Type Approvals MTBF Ingress protection Environmental The Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system. Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN7010.XX Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Dual Band RET Module Dual Band Remote Controlled Electrical Down-Tilt (RET) RET Technology Part Number: 7020.00 Easy configuration AISG Compatible Outdoor Usage The Dual Band RET Unit is part of the Powerwave RET Technology and consists of a stepping motor that can be connected to the positioning rod used for adjusting the electrical down tilt of Powerwave MET antennas. Upon command from the MCU, the stepping motor moves the positioning rod up or down to achieve the desired antenna tilt angle. The unit has dual RS-485 connectors for easy daisy chaining without the need for an external splitter. The unit can be mounted on site on an antenna that is already in place or can be delivered already mounted on a Powerwave antenna. Key Benefits: • • • • • Field upgradeable with installed MET antennas Optional factory pre-mounting on MET antennas Integrated RS-485 splitter for easy daisy chaining Field proven vented design Fully integrated dual RET motor housing Dual Band Module Dual Band RET Module RET Technology Technical Specifications Product Number Power supply Current consumption Start up surge Current draw during Antenna tilting 7020.00 +9 to30V < 1mC < 500 mA at Vin <10V < 400 mA at Vin <19V < 250 mA at Vin >19V < 100 mA at Vin <19V < 50 mA at Vin >19V 9.6 kbps, 38.4kbps <± 0.3mm 1 kg < 125 X 213 X 62 (excl mounting screws) IEC 60130-9 (Ed. 3.0) M6 screw -40 to +65C Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >500.000 hrs. IP55 ETSI 300 019 QUALITY AND RELIABILITY All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. NETWORK OPTIMIZATION COVERAGE AND CAPACITY TECHNOLOGY LEADERSHIP All other operational states AISG Data Rate Rod positioning accuracy Weight Dimensions (W,L,H) (mm) Connectors AISG output/ input Protection Ground Operation temperature range Type Approvals MTBF Ingress protection Environmental Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system. D031-08234 Rev A Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Triple Band RET Module Triple Band Remote Controlled Electrical Down-Tilt (RET) RET Technology Part Number: 7030.00 Easy configuration AISG Compatible Outdoor Usage The Triple Band RET Unit is part of the Powerwave RET Technology and consists of a stepping motor that can be connected to the positioning rod used for adjusting the electrical down tilt of Powerwave MET antennas. Upon command from the MCU, the stepping motor moves the positioning rod up or down to achieve the desired antenna tilt angle. The unit has dual RS-485 connectors for easy daisy chaining without the need for an external splitter. The unit can be mounted on site on an antenna that is already in place or can be delivered already mounted on a Powerwave antenna. Key Benefits: • • • • • Field upgradeable with installed MET antennas Optional factory pre-mounting on MET antennas Integrated RS-485 splitter for easy daisy chaining Field proven vented design Fully integrated triple RET motor housing Triple Band Module Triple Band RET Module RET Technology Technical Specifications Product Number Power supply Current consumption Start up surge Current draw during Antenna tilting 7030.00 +9 to30V < 1mC < 500 mA at Vin <10V < 400 mA at Vin <19V < 250 mA at Vin >19V < 100 mA at Vin <19V < 50 mA at Vin >19V 9.6 kbps, 38.4kbps <± 0.3mm 1 kg < 125 X 213 X 62 (excl mounting screws) IEC 60130-9 (Ed. 3.0) M6 screw -40 to +65C Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. > 500.000 hrs. IP55 ETSI 300 019 NETWORK OPTIMIZATION COVERAGE AND CAPACITY TECHNOLOGY LEADERSHIP All other operational states AISG Data Rate Rod positioning accuracy Weight Dimensions (W,L,H) (mm) Connectors AISG output/ input Protection Ground Operation temperature range Type Approvals MTBF Ingress protection Environmental QUALITY AND RELIABILITY All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system. Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN0000000-00 Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. REMOTE ELECTRICAL TILT 7011.00 Single Band E-RET ELECTRICAL SPECIFICATIONS* Product Number Standard Power supply Power consumption during tilting Power consumption idle Data protocol Rod positioning accuracy Operation temperature range MTBF 7011.00 Ericsson +12 to +30V <10 W <1.5 W ISO/IEC 8482 and 1056-ASC/RET interface <+/-0.3 mm -40 to +65° C >1500.000 hrs. MECHANICAL SPECIFICATIONS* Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connectors output / input Ingress protection Environmental 1 kg <62 x 78 x 216 M6 screw DIN 45 326 IP65 ETSI 300 019 *All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. RET SYSTEM* Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system. 215 00 Ericsson +12 to +30V <10 W <1. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system. 216 .00 Single Band E-RET for Multiband Antennas ELECTRICAL SPECIFICATIONS* Product Number Standard Power supply Power consumption during tilting Power consumption idle Data protocol Rod positioning accuracy Operation temperature range MTBF 7031.3 mm -40 to +65° C >1500. Please contact your Powerwave representative for complete performance data. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus.REMOTE ELECTRICAL TILT 7031.H) (mm) Connector Protection Ground Connectors output / input Ingress protection Environmental 1 kg <125 x 213 x 62 (excluding mounting screws) M6 screw DIN 45 326 IP65 ETSI 300 019 *All specifications subject to change without notice.L. flexibility and efficiency in remote control of towermounted telecommunication equipment. MECHANICAL SPECIFICATIONS* Weight Dimensions (W.5 W ISO/IEC 8482 and 1056-ASC/RET interface <+/-0. RET SYSTEM* Powerwave RET system is designed to meet the high requirements for reliability.000 hrs. supervises and provides DC power to the RET System via a common bus.xx AISG Compatible WEB Server SNMP Agent The MCU is a part of the Powerwave Remote Control Electrical Down-Tilt (RET) System and controls. Electrical tilting of antennas and setting of TMA gain can be performed from a remote location such as the NOC (Network Operating Centre) using web or SNMP interface. and one port for connection to a site LAN • One RS-232 port for serial communication • Eight alarm input ports for surveillance of external equipment Master Control Unit • Two configurable external alarm output ports for connection to base station • Integrated SNMP agent • Compatible with Powerwave NWM for advanced network management .Master Control Unit The Master Control Unit (MCU) controls and supervises the Powerwave RET System RET Technology Part Number: 7070. Key benefits: • User friendly interface for configuration and tuning of Antenna Line Devices • Remote or local configurable via web interface (embedded element manager) • Two Ethernet ports: one local port for connection to a computer. Local management at the base station is also possible by connecting a computer directly to the MCU. The MCU is fully compatible with the generic Powerwave network management platform NetWay ManagerTM (NWM) for advanced network management with features such as fleet software download. 4 kbps < 2.48 A 54 mC during <10 ms 5 ±1 V 5 ± 2mA 30 V DC 0. Inc. CA 92705 USA PN7070. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.Master Control Unit RET Technology Specifications Product Number Power supply DC / Current consumption AC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors Local alarm ports (IN port) Output voltage at open Output current at closed Local control ports (Out ports.30 (24 V) 7070. Height 44mm. Depth 207mm CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. flexibility and efficiency in remote control of tower mounted telecommunication equipment. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2005.50 (-48V) AC / 24V / -48V -48V /< 2. Andrew Place Santa Ana. Inc. >250. 38.7 / 1. Powerwave Technologies. Inc. 3. . Powerwave.5 kg Width 19” rack. 1801 East St. 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions Connectors DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental 7070.powerwave. Corporate Headquarters Powerwave Technologies.5 A 9. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. Powerwave Technologies. Please RELIABILITY contact your Powerwave Representative for complete performance data.0A +24 V DC 1.5A 115/230 VAC 1. Powerwave RET system is designed to meet the high requirements for reliability.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.10 (AC) 7070. -5C to 60C ETSI 300 019 * Weather-protected locations* COVERAGE AND CAPACITY TECHNOLOGY LEADERSHIP NETWORK OPTIMIZATION All specifications subject to AND QUALITY change without notice.000 hrs. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.XX Tel: 714-466-1000 Fax: 714-466-5800 www.6 kbps. All Rights reserved.16 A 3. 00 ANT 7060.Current Injector Layer One Converter CILOC for communication and DC supply over the RF feeder to the ALDs RET Technology Part Number: 7060. The CILOC is used for transferring DC supply and data signals to the ALDs. The external DC supply and RS-485 signals on the CILOC unit are applied through a multi-pole connector. The DC supply and RS-485 signal interface is implemented in accordance to the AISG specification.10 BTS AISG Compatible Outdoor Usage The CILOC is part of the Powerwave RET System and makes it possible to connect antenna line devices (ALDs) to a Master Control Unit by using the RF feeder. Key Benefits: • Easy configuration and tuning of new equipment • Power control and cell breathing by varying antenna coverage footprints • Fine tuning of soft handover situation during live operation Current Injector Layer 1 Converter . 2 dB >20 dB >20dB <-116 dBm Average (RMS) 55 dBm Peak (pulse duration < 0.powerwave. >500. Inc. . Inc. All Rights reserved. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.4 kbps < 750 g < 48 X 92 X 80 DIN 7/16 female/male IEC 60130-9 (Ed. Powerwave Technologies.000 hrs.0) M8 screw -40 to +65C Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. Inc. CA 92705 USA PN0000000-00 Tel: 714-466-1000 Fax: 714-466-5800 www.3 A 9.6 kbps. Corporate Headquarters Powerwave Technologies.38.10 (BTS) 806-960 MHz and 1710-2180 MHZ <0.00 (ANT) 7060. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus.RET Technology Current Injector Layer One Converter Technical Specifications Product Number Frequency range Insertion Loss Return Loss ANT port Return Loss BTS port Passive intermodulation at 2X43dBm Power handling Power supply Current consumption Current handling AISG data rate Weight Dimensions (W. 3. flexibility and efficiency in remote control of tower mounted telecommunication equipment. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies. 1801 East St.L. Andrew Place Santa Ana. IP65 ETSI 300 019 All specifications subject to change without notice. Please contact your QUALITY AND RELIABILITY Powerwave Representative for complete performance data.1ms) 68 dBm +9 to+31V < 50 mA ≤ 1. COVERAGE AND CAPACITY TECHNOLOGY LEADERSHIP NETWORK OPTIMIZATION The Powerwave RET system is designed to meet the high requirements for reliability. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2005. Powerwave.H) (mm) RF connectors AISG output Protection Ground Operation temperature range Type Approvals MTBF Ingress protection Environmental 7060. thereby guaranteeing long.2 dB The Powerwave® Diplex Filter DCT is available both as a single and double unit. TMA system and Antenna. one port for 1800/1900/2100 MHz systems and a common port.<0. cost effective solution for coverage enhancement and increased quality in mobile communication networks. reliable. The Powerwave TMA product line offers an easy to install. Each diplexer has one port for 800/900 MHz systems. Different DC path options are available in order to support single or dual band TMA solutions.Diplex Filter Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with DC Transparency 800 – 2100 MHz Part Number: LGP219nn Frequency Range: 824-960 MHz 1710 – 2170 MHZ Return Loss: >20 dB Insertion Loss: <0. The Diplex Filter enables TMA systems to be implemented into the antenna line by allowing DC to be fed through the diplexer on the RF cable. The unit can be used both at the BTS end for combining frequency bands to a common port and at the Antenna end for splitting the frequency bands to separate antennas. the size and weight of the Diplex Filter is reduced considerably. CW and Peak Power • Negligible Transmit Band Loss • High Experienced MTBF • DC Transparency Diplex Filter . Key Benefits: • Superior Power Handling Capability. CW and peak power.1 dB . maintenance free service in all environmental conditions. It is designed for outdoor use and intended for co-location of base stations to enable sharing of the feeder. as well as low loss. The unit comprises of high Q band-pass filters. A patented mechanical design is utilized where all circuits are integrated within the filter body. The Powerwave unique design ensures superior power handling capability. By this. DC traps and lightning protection circuits. A vented enclosure design is employed to prevent the affects of condensation. 1 dB >20 dB >52 dB 400W average. Corporate Headquarters Powerwave Technologies.3 liter (single unit) Off white (NCS 1502-R) DIN 7/16 female. fed via the RF cable According to IEC 61312-1 Size-W x H x D (without mounting plate) Weight (single unit) Volume Color Connectors Mounting kit for poles Temperature range MTBF 824-960 MHz <0. Hose clamps in stainless steel -40 °C to +65 °C (-40°F to +149°F) 10 million hours 1710-2100 port Common port Lightning protection Mechanical data Environmental data Approvals and tests Safety EN 609 50. Powerwave.1600 kW peak power -110 dBm (-153dBc) (two 43 dBm carriers in the Tx band) 1710-2170 MHz <0. Inc. max. Inc.powerwave. Powerwave Technologies.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 ©Copyright Sept. ETL Ingress protection. Andrew Place Santa Ana. . Frequency range Insertion loss* Return loss Rejection (824-960 MHz) Max power 1800 MHz Max power 1900 MHZ Intermodulation products.3 x 3.0 in) single unit <2. Contact your Powerwave representative for complete performance data.Diplex Filter with DC Transparency 800 – 2100 MHz Technical Specifications 824-960 port Frequency range Insertion loss* Return loss Rejection (1710-1990 MHz) Max power 800 AMPS Max power 900 MHZ Intermodulation products. All Rights reserved.2 dB >20 dB >52 dB 200 W average. 2 A 3 kA 10/350 µs. 10 kW peak power 200 W average. 1600 kW peak power 200 W average. 5 kW peak power -110 dBm (-153dBc) (two 43 dBm carriers in the Tx band) <31 V. center pin (any port)-shield 112 x 158 x 74 mm (4. max. IP65 EN 60 529 Environmental ETS 300 019 EMC ETS 300 342-3 *Typical. the Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. CA 92705 USA PN LGP219nn Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. Inc. UL 1950. TMA supply voltage.4 x 6. 2004.5 kg (single unit) 1. 1801 East St. All specifications are subject to change without notice. 2 / <0. Key Benefits: • • • • • Compact Design Inbuilt DC Bypass Excellent Power Handling Negligible RF Loss Lightning Protected 900/1800 MHz Diplexer for UMTS Co-Location with DC Transparency Configurable .900/1800 Diplexer UMTS Co-Location Diplexer 900/1800 MHz for UMTS Co-Location with DC Transparency Configurable Part Number: LGP144nn Frequency Range: 880-960 MHz / 1710-1880 MHz Return Loss: >20 Insertion Loss: <0. Each diplexer has one 880-960 port and one 1710-1880 port as well as a common port. This unit is intended for indoor or outdoor installation. The Powerwave® Diplexer is available both as a single and double unit.25 / <0. The filter has configurable DC transparency and integrated lightning protection on all ports to make it easy using TMAs in the antenna system. Rejection between the GSM and UMTS systems is provided to suppress wide band noise and spurious signals between the systems.4 900/1800 MHz The Powerwave® Diplexer 900/1800 with UMTS rejection is used to combine GSM 900 and GSM 1800 signals to a common feeder. 2 >20 >55 >64 >44 >80 W (>49) >320 W (>55) -153 1710-1880 <0. Powerwave Technologies. Contact your Powerwave representative for complete performance data. IP 65 DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C >10 Million Hours On all ports.4 dB in Tx >20 >63 >64 >44 >80 W (>49) >320 W (>55) -153 900/1800 MHz All specifications are subject to change without notice. Inc.6 lbs) Off White (NCS 1502-R) Aluminum. Powerwave Technologies. even DC isolated EN 60 950 EN 60 529 ETS 300 019 Corporate Headquarters Powerwave Technologies.powerwave. WxHxD (without mounting plate) Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Lightning Protection Safety Ingress Protection Environmental 136 x166 x63mm (5.5 x 6. Andrew Place Santa Ana.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.25 dB in Rx.51 in) <3 kg (6. <0. Powerwave. All Rights reserved. 1801 East St. Inc. . The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. CA 92705 USA PNLGP144nn Tel: 714-466-1000 Fax: 714-466-5800 www. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.5 x 2.900/1800 Diplexer UMTS Co-Location Electrical Specifications 880-960 Port Frequency range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection GSM 1800 (dB) Rejection UMTS UL (dB) Rejection UMTS DL (dB) Average Power Handling (dBm) Peak Power Handling (dBm) IM 2Tx@43dBm (dBc) 1710-1880 Port Frequency range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection GSM 1800 (dB) Rejection UMTS UL (dB) Rejection UMTS DL (dB) Average Power Handling (dBm) Peak Power Handling (dBm) IM 2Tx@43dBm (dBc) 880-960 <0. Mechanical Specifications Size. Inc. Rejection between the GSM and UMTS systems is provided to suppress wide band noise and spurious signals between the systems. maintenance free service in all environmental conditions. This unit is intended for indoor or outdoor installations. The diplexer has a configurable DC path to provide both DC and modulated subcarrier communication to TMA and RET systems over the feeder cable. Powerwave vented enclosure design is deployed to prevent the effect of condensation thereby guaranteeing long reliable.1800/2100 Diplexer Diplexer for 1800/2100 with Configurable DC Transparency Part Number: LGP145nn Frequency Range: 1710-1880 MHz / 1920-2170 MHz Low Insertion Loss 1800/2100 The Powerwave® Diplexer 1800/2100 is to be used for combining GSM 1800 and UMTS 2100 signals to a common feeder. Key Benefits: • Compact Design • Inbuilt DC Transparency and Subcarrier Support for Data Communication • Negligible Transmit Band Loss • Lightning Protected on All Ports • Full Band 1800/UMTS Diplexer . 0. 2Tx@43dBm (dBc) 1920-2170 0. Full Band (MHz) Insertion Loss (dB) Return Loss Rejection 1800 UL Rejection 1800 DL Average Power Handling Peak Power IM.9 lbs) Off White (NCS 1502-R) Aluminum. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Contact your Powerwave representative for complete performance data.1800/2100 Diplexer Electrical Specifications 1800 Ports Frequency Range. Inc. 0.3 in Rx. WxHxD (without mounting plate) Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Safety Ingress Protection IP 65 Environmental 180 x 162 x 61mm (7. Andrew Place Santa Ana. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4 in) 3. Full Band (MHz) Insertion Loss (dB) Return Loss (dB) Rejection UMTS UL Rejection UMTS DL Average Power Handling Peak Power IM. Mechanical Specifications Size.3 x 2. Powerwave. .6 in Tx >18 >74 >59 >240 W (>53.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5 in Rx.1 x 6.6 kg (7. Inc. Powerwave Technologies.powerwave. 1801 East St.3 in Tx >18 >60 >60 >80 W (>49 dBm) >1600 W (>62 dBm) <-161 All specifications are subject to change without notice. All Rights reserved. 2Tx@43dBm (dBc) 1710-1880 0. CA 92705 USA PNLGP145nn Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. Inc.8 dBm) >1440 W (>61 dBm) <-161 1800/2100 MHz UMTS Ports Frequency Range. IP 65 DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C 10 Million Hours EN 60 950 EN 60 529 ETS 300 019 Corporate Headquarters Powerwave Technologies. The unit can be used both at the BTS end for combining frequency bands to a common port and at the antenna end for splitting the frequency bands to separate antennas. It is designed for outdoor use and intended for co-siting of base stations to enable sharing of feeder. The filter has configurable DC transparency and integrated lightning protection on all ports to make it easy using TMAs in the antenna system.5 Powerwave® offers a variety of multiband filters for installation in 3G networks. 1800 MHz and UMTS with DC Transparency 900/1800/2100 MHz Part Number: LGP141nn Frequency Range: 880-960 MHz / 1710-1880 MHz / 1920-2170 MHz Return Loss: >20 dB Insertion Loss: <0. 1800 MHz and UMTS with DC Transparency . The filters enable re-use of existing feeders in order to reduce cost of new installations and simplifies the process of getting necessary site permissions for the new installations.Triplexer Fullband Triplex Filter for 900.3 / <0.2 / <0. TMA system and antenna. Key Benefits: • Compact Design • Inbuilt DC Transparency and Subcarrier Support • Superior Power Handling • Negligible Transmit Band Loss • Lightning Protected • Full Band Triplex Filter for 900. Powerwave Technologies.7 x 9. Powerwave.3 dB in Tx >20 dB >80 W (>-49 dBm) >1600 W (>62 dBm) <-116 dBm @2Tx43 dBm in Tx-band >6400 W (>68 dBm) >50 dB 1800 Port UMTS Port Common Port Isolation Between Ports All specifications are subject to change without notice. Inc. All Rights reserved.Triplexer Fullband 900/1800/2100 MHz Technical Specifications Product number 900 Port LGP141nn Frequency range. IP 65 (Option IP 68) DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C >10 Million Hours EN 60 950. Andrew Place Santa Ana. Inc.6 dB in Tx >20 >200 W (>53 dBm) >1600 W (>62 dBm) <-116 dBm @2x43 dBm Tx-band 1920-2170 <0. full band (MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm) Intermodulation Products.0 x 2. . Mechanical Specifications Size. 1801 East St. Full Band (MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm) Intermoducation Products. Max Frequency Range. ETL EN 60 529 ETS 300 019 Corporate Headquarters Powerwave Technologies.3 dB in Rx. WxHxD (without mounting plate) Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Safety Ingress Protection. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. IP 65 Environmental 169 x 228 x 68mm (6. <0. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.7 in) <3.5 lbs) Off White (NCS 1502-R) Aluminum. Contact your Powerwave representative for complete performance data.full band (MHz) Insertion loss (dB) Return loss (dB) Average Power Handling Peak Power Intermodulation Products.5 dB in Rx. CA 92705 USA PNLGP141nn Tel: 714-466-1000 Fax: 714-466-5800 www. UL 60 950. <0. Max Frequency range. Inc.0 kg (6.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Max Peak Power Rejection Between Ports (except common) 880-960 <0. Powerwave Technologies.powerwave.2 >20 >200 W (>53) >1600 W (>62) <-116 dBm @2x43 dBm in Tx-band 1710-1880 <0. The duplexed design enables external installation on Rx/Tx systems.Co-Location Filter 900 Co-Location Filter GSM900 890-960 MHz Part Number: LGP195nn Frequency Range: 890-915 MHz / 896-915 MHz Return Loss: >18 dB Insertion Loss: <1. The unit comes in three different versions depending on carrier allocations.5dB The Powerwave® Co-location filter for GSM900 provides attenuation of 800MHz transmitters in order not to degrade the GSM900 uplink. Key Benefits: • Compact Design • Excellent Power Handling • Duplexed Design for Rx/Tx Co-Location Filter 900 MHz .5dB/ <1.0 / <0. Inc. Mechanical Specifications Size.0 >18 935-960 941-960 <0.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5 >18 >+53 >+62 >30 >37 >30 -153 Transmit Rejection: -01: 869-889 (MHz) -02: 869-888 (MHz) -03: 869-895 (MHz) 2Tx@43dBm (dBc) Intermodulation All specifications are subject to change without notice.Co-Location Filter 900 Electrical Specifications 890-915 MHz Receive Frequency Range -01 & -02 (MHz) Frequency Range -03 (MHz) Insertion Loss -01 & -03 (dB) Insertion Loss -02 (dB) Return Loss (dB) Frequency Range. Powerwave Technologies. CA 92705 USA PNLGP195nn Tel: 714-466-1000 Fax: 714-466-5800 www. All Rights reserved.powerwave.8 kg (<8. WxHxD Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Ingress Protection 169 x 228 x 68 mm (6. Powerwave. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.4 lbs) Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel -5 C to +55 C >10 Million Hours IP44 o o Corporate Headquarters Powerwave Technologies.7 in) <3.5 <1. Andrew Place Santa Ana. Contact your Powerwave representative for complete performance data.7 x 9. Inc.0 x 2. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. .01 & -02 (MHz) Frequency Range -03 (MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm) 890-915 896-915 <1. 1801 East St. Inc. The filter. transparent to DC and subcarrier. UMTS Rejection with DC Transparency .900/1800 MHz Band Pass Filter Band Pass Filter 900/1800 MHz.2 / <0. The filter can be used when GSM900 and GSM1800 share the same feeder or for either system alone. Key Benefits: • Compact Design • Inbuilt DC Transparency and Subcarrier Support • Negligible RF Loss • Lightning Protected Band Pass Filter 900/1800 MHz. UMTS Rejection with DC Transparency Part Number: LGP164nn Frequency Range: 880-960 / 1710-1880 Return Loss: <18 Insertion Loss: <0. enables use of TMA and RET in the antenna system. The primary use of the filter is in applications where UMTS is co-located with GSM.5 900/1800 MHz The Powerwave® Band Pass Filter for 900 and 1800 MHz with UMTS rejection is used to suppress wide band noise and spurious signals from GSM systems into the UMTS receiver band. . CA 92705 USA PNLGP164nn Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. Inc.1 lbs) Off White (NCS 1502-R) Aluminum. Inc.0 x 3. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Powerwave Technologies. 1801 East St.4 kg (3. Andrew Place Santa Ana. Mechanical Specifications Size.powerwave.0 x 2.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.0 in) <1.2 <0. IP 65 DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C >10 Million Hours EN 60 950 EN 60 529 ETS 300 019 Corporate Headquarters Powerwave Technologies. Inc. Contact your Powerwave representative for complete performance data. WxHxD Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Safety Ingress Protection Environmental 255 x 75 x 50mm (10. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5 >18 >60 >80 W (>49) >320 W (>55) -161 All specifications are subject to change without notice.900/1800 Band Pass Filter Electrical Specifications 900/1800 MHz Frequency Range (MHz) Insertion Loss (800-960 MHz) (dB) Insertion Loss (1710-1880 MHz) (dB) Return Loss (dB) Rejection UMTS (dB) Average Power Handling (dBm) Peak Power (dBm) IM 2Tx@43dBm (dBc) 880-960 / 1710-1880 <0. All Rights reserved. Powerwave. supervision. The vented enclosure design is employed to prevent the effect of condensation. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable. especially when the frequency bands are scattered. Appropriate for new rollouts by optimizing coverage with a reduced number of BTSs or as an upgrade to existing BTSs for enhancing the existing coverage. compact and lightweight TMA solution. The unit comprises of high Q band-pass filters.900 MHz Tower Mounted Amplifier Tower Mounted Amplifier. thereby guaranteeing long. Full Band TMA facilitates simplified logistics. Dual Duplex 900 MHz Part Number: LGP 104nn Low Tx Insertion Loss Low Rx Noise Figure Full Band 900 MHz The Powerwave® TMA-DD 900 is a full band Tower Mounted Amplifier (TMA) to be installed near the antenna. These TMAs offer an easy to install. The deployment of the TMA System will provide enhanced coverage and improved up-link signal quality. dual balanced low noise amplifiers with circuits for active bias. reliable. maintenance-free service in all environmental conditions. Key Benefits: • • • • • • Improved Network Quality Increased Coverage State of the Art Performance Excellent Power Handling Low Tx Loss Exceptional Reliability TMA-DD 900 MHz . maintenance free. alarms and lightning protection circuit. cost effective solution for coverage enhancement and increased quality in mobile communication networks. Inc. Contact your Powerwave representative for complete performance data. -40 °C to +65 °C (-40 °F to +149 °F) >1 million hours EN 60 950 EN 60 529 ETS 300 019 ETS 300 342-3 D031-08214 Rev A Corporate Headquarters Powerwave Technologies. 1801 East St. Andrew Place Santa Ana.7 >+25 935-960 0. All Rights reserved.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. full band (25 MHz) Nominal gain (dB) Return Loss (dB) Noise figure* (dB) Output 3rd order Intercept Point (OIP3)* dBm Frequency range. . Inc.3 x 11. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.35 >18 <-159 1.0 in) <5. Mounting kit for pole and wall is included.900 MHz Tower Mounted Amplifier Technical Specifications Product Number Up-link LGP104nn Frequency range. Powerwave Technologies. Powerwave.5 W per LNA Down-link Intermodulation Alarm Functionality Power Consumption 900 MHz * Typical All specifications subject to change without notice. Inc. IP 65 Environmental EMC 109 x 284 x 127 mm (4.powerwave.full band (25 MHz) Insertion loss* (dB) Return loss (dB) 2 Tx@x43 dBm (dBc) Two levels.individually supervised LNAs @12 VDC 890-915 12 >16 <1. Powerwave Technologies.6 kg (12.2 x 5. Mechanical Specifications Size. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.3 lbs) Off white (NCS 1502-R) Aluminum DIN 7/16 female.W x H x D (without mounting plate) Weight Color Housing RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection. maintenance-free service in all environmental conditions. cost effective solution for coverage enhancement and increased quality in mobile communication networks. dual balanced low noise amplifiers with circuits for active bias.900 MHz Tower Mounted Amplifier Dual Duplex GSM 900 MHz Extended Band GSM 900 MHz Part Number: LGP 166nn Up-link: 887-915 MHz Down-link: 932-960 MHz Gain: 12 dB Noise Figure: < 1. Extended Band TMA facilitates simplified logistics. TMA System will provide enhanced coverage and improved up-link signal quality.7 dB The Powerwave® TMA-DD GSM 900 is a extended band Tower Mounted Amplifier (TMA) to be installed near the antenna. especially when the frequency bands are scattered. The vented enclosure design is employed to prevent the effect of condensation. The unit comprises of high Q band-pass filters. GPRS and EDGE network it will increase capacity and coverage as well as extend the battery life time for the handsets. compact and lightweight TMA solution. Appropriate for new rollouts by optimizing coverage with a reduced number of BTSs or as an upgrade to existing BTSs for enhancing the existing coverage. thereby guaranteeing long. alarms and lightning protection circuit. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable. reliable. supervision. Deployed in a GSM. maintenance free. Key Benefits: • • • • • • • Improved Network Quality Increased Coverage Compact Design State of the Art Performance Excellent Power Handling Low Tx Loss Exceptional Reliability . These TMAs offer an easy to install. com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.7 > +23 932-960 < 0. -40 ° to +65 ° (-40 ° to +149 ° C C F F) >1 million hours EN 60 950 EN 60 529 ETS 300 019 ETS 300 342-3 Corporate Headquarters Powerwave Technologies. .Tower Mounted Amplifier Technical Specifications GSM 900 MHz Product Number Up-link LGP166nn Frequency range. IP 65 Environmental EMC 169 x 228 x 66 mm (6. CA 92705 USA PNLGP104nn Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave. Mechanical Specifications Size.individually supervised LNAs @12 VDC 887-915 12 > 20 < 1. Contact your Powerwave representative for complete performance data.full band (28 MHz) Insertion loss* (dB) Return loss* (dB) 2 Tx@x43 dBm (dBc) Two levels. Extended band (28 MHz) Nominal gain (dB) Return loss* (dB) Noise figure* (dB) Output 3rd order Intercept Point* (dBm) Frequency range. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003. Inc.2 W per LNA Down-link Intermodulation Alarm Functionality Power Consumption * Typical All specifications subject to change without notice.W x H x D (without mounting plate) Weight Color Housing RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection. All Rights reserved. Mounting kit for pole and wall is included. Inc.7 kg (12.7 > 20 <-158 1. Inc.3 lbs) Off white (NCS 1502-R) Aluminum DIN 7/16 female.6 x 9 x 2.6 in) 5. Andrew Place Santa Ana.powerwave. Powerwave Technologies. 1801 East St. The unit comprises of high Q band-pass filters. The vented enclosure design is employed to prevent the effect of condensation. cost effective solution for coverage enhancement and increased quality in mobile communication networks. TMA System will provide enhanced coverage and improved up-link signal quality. dual balanced low noise amplifiers with circuits for active bias. especially when the frequency bands are scattered. maintenance-free service in all environmental conditions. GPRS and EDGE network it will increase capacity and coverage as well as extend the battery life time for the handsets. reliable. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable. Key Benefits: • • • • • • • Improved Network Quality Increased Coverage Compact Design State of the Art Performance Excellent Power Handling Low Tx Loss Exceptional Reliability .900 MHz Tower Mounted Amplifier Dual Duplex EGSM 900 MHz Full Band EGSM 900 MHz Part Number: LGP 192nn Up-link: 880-915 MHz Down-link: 925-960 MHz Gain: 12 dB Noise Figure: < 1. Appropriate for new rollouts by optimizing coverage with a reduced number of BTSs or as an upgrade to existing BTSs for enhancing the existing coverage.7 dB The Powerwave® TMA-DD EGSM 900 is a full band Tower Mounted Amplifier (TMA) to be installed near the antenna. Full Band TMA facilitates simplified logistics. alarms and lightning protection circuit. supervision. These TMAs offer an easy to install. Deployed in a GSM. thereby guaranteeing long. maintenance free. compact and lightweight TMA solution. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright September 2003.individually supervised LNAs @12 VDC 880-915 12 > 20 < 1.3 lbs) Off white (NCS 1502-R) Aluminum DIN 7/16 female.powerwave.5 in) 5. 1801 East St.2 W per LNA Down-link Intermodulation Alarm Functionality Power Consumption * Typical All specifications subject to change without notice.7 kg (12. Inc. Powerwave. All Rights reserved. CA 92705 USA PNLGP104nn Tel: 714-466-1000 Fax: 714-466-5800 www.full band (35 MHz) Insertion loss* (dB) Return loss* (dB) 2 Tx@x43 dBm (dBc) Two levels.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.7 > +23 925-960 < 0.Tower Mounted Amplifier EGSM 900 MHz Technical Specifications Product Number Up-link LGP192nn Frequency range. Inc.7 x 3. full band (35 MHz) Nominal gain (dB) Return loss* (dB) Noise figure* (dB) Output 3rd order Intercept Point* (dBm) Frequency range.6 x 10. -40 ° to +65 ° (-40 ° to +149 ° C C F F) >1 million hours EN 60 950 EN 60 529 ETS 300 019 ETS 300 342-3 Corporate Headquarters Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.7 > 20 <-158 1. Contact your Powerwave representative for complete performance data. Powerwave Technologies.W x H x D (without mounting plate) Weight Color Housing RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection. Mechanical Specifications Size. Mounting kit for pole and wall is included. . Andrew Place Santa Ana. IP 65 Environmental EMC 169 x 272 x 89 mm (6. Powerwave Technologies. supervision. Deployed in a GSM.5 dB 1800 MHz The Powerwave® Twin TMA-DD 1800 consists of two full band Tower Mounted Amplifiers (TMA) to be installed near the antenna.Twin Tower Mounted Amplifier Twin Dual Duplex 1800 MHz Full Band Part Number: LGP 185nn Up-link: 1710-1785 MHz Down-link: 1805-1880 MHz Gain: 12 dB Noise Figure: 1. The Powerwave® unique field proven reliability secures a long maintenance free service in all environmental conditions. The unit comprises of high Q band-pass filters. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable. compact and lightweight TMA solution. Full Band TMA facilitates simplified logistics. dual balanced low noise amplifiers with circuits for active bias. especially when the frequency bands are scattered. alarms and lightning protection circuit. two TMAs in One Unit • Full Band Design for Scattered Blocks of Frequencies • Low Noise Figure for Increased Coverage and Improved Network Quality • Low Tx Insertion Loss • Exceptional Reliability . The Twin contains TMAs for both main and diversity paths and fits perfectly with cross-pole antennas. EDGE.9 litres it is extremely small and compact. Key Benefits: • World Leading Compact Design. With a volume of only 2. CDMA or WCDMA (CDMA 2000 or UMTS) network it will increase capacity and coverage as well as extend the battery life time for the handsets. individually supervised LNAs @12 VDC 1. full band (75 MHz) 1710-1880 MHz Nominal gain (dB) 12 Noise figure* (dB) 1.W x H x D (without mounting plate) 169 x 272.9 lbs) Colour Off white (NCS 1502-R) Housing Aluminium RF-connectors DIN 7/16 female. 1801 East St.1 ©Copyright September 2003.7 x 2. Contact your Powerwave representative for complete performance data.7 in) Weight <4. D031-08219 Rev A Corporate Headquarters Powerwave Technologies.1 Down-link Intermodulation Alarm functionality Power consumption Mechanical data 1800 MHz Environmental data Approvals and tests Optional AISG compatibility * Typical All specifications subject to change without notice. .com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. . Andrew Place Santa Ana. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies. Powerwave Technologies. Inc.7 mm (6.5 x 67.Twin Tower Mounted Amplifier Technical Specifications Product number Up-link LGP185nn Frequency range.4 Return loss (dB) >18 @ 2 x 43 dBm Tx carriers In receive band <-116 dBm. Temperature range -40 °C to +65 °C MTBF >1 million hours Safety EN 60 950 Ingress protection.5 Output 3rd order Intercept Point* (dBm) +26 Bypass functionality Optional Frequency range.full band (75 MHz) 1805-1880 MHz Insertion loss* (dB) 0.7 x 10.5 kg (9. IP 65 EN 60 529 Environmental ETS 300 019 EMC ETS 301 489 AISG 1. referred to Antenna port Two levels. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 Rev 0. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Mounting kit Mounting kit for pole and wall is included. Inc. All Rights reserved.5 W per LNA Size. Inc.powerwave. Powerwave. alarms and lightning protection circuit. The Twin contains TMAs for both the main and diversity branch and fits perfectly with cross-pole antennas. compact and lightweight TMA solution The Powerwave unique field proven reliability secures a long maintenance-free service in all environmental conditions Key Benefits: • World Leading Compact Design. Deployed in a 2100 network it will increase capacity and coverage as well as extend battery-life for handsets.Micro Twin™ TMA Micro Twin™ Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band Part Number: LGP215nn Up-link: 1920-1980 MHz Down-link: 2110-2170 MHz Gain: 12 dB. dual balanced low noise amplifiers with circuits for active bias.4 liters. especially when the frequency bands are scattered.4 dB 2100 MHz D031-08222 Rev A The new Powerwave Micro Twin™ 2100 is less than half the size than present conventional designs. The Micro Twin™ is AISG compatible with automatic current alarm fall back to support installations with current alarm supervision. fixed or 23-32 dB variable gain Noise Figure: 1. supervision. it is extremely small and compact. two TMAs in One Unit • Low Noise Figure for Increased Coverage and Improved Network Quality • Low Tx Insertion Loss • Exceptional Reliability • Compatible With Most Node B Systems • AISG Compatible Micro Twin™ Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band . With a volume of only 1. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable. It consists of two full band Tower Mounted Amplifiers (TMA) in one housing to be installed near the antenna. Full Band TMA facilitates simplified logistics. The unit comprises of high Q band-pass filters. 4 +25 <2.Micro Twin™ TMA Technical Specifications Product number Up-link LGP215nn Frequency range. Inc. IP 65 and IP 67 Environmental EMC 154 x 192 x 50 mm (6. Inc. Inc.5 kg (7. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.W x H x D (without mounting plate) Weight Color RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection. full band (60 MHz) Nominal gain (dB) Noise figure* (dB) Output 3rd order Intercept Point (dBm)* Bypass loss* (dB) Frequency range.7 lbs) Off white (NCS 1502-R) DIN 7/16 female. 1801 East St.5 W per LNA Down-link 2100 MHz Intermodulation Alarm functionality Power consumption Powerwave is an active member of the 3GPP and Antenna interface Standard Group *Typical All specifications are subject to change without notice.0 in) <3.0 dB (12 dB variant) 2110-2170 MHz 0.powerwave. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright March 2005. -40 °C to +65 °C >1 million hours (over 100 years) EN 60 950 EN 60 529 ETS 300 019 ETSI 125 113 D031-08222 Rev A Corporate Headquarters Powerwave Technologies. Mechanical Specifications Size. All Rights reserved. Andrew Place Santa Ana. Powerwave. fixed or 23-32 dB variable gain 1.3 dB >20 dB <-125 dBm. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Mounting kit for pole and wall is included.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. referred to Antenna port 1.0 x 7. Powerwave Technologies.5 x 2. Contact your Powerwave representative for complete performance data. Powerwave Technologies. .full band (60 MHz) Insertion loss* Return loss @ 2 x 43 dBm Tx carriers In receive band AISG Compatible @12 VDC 1920-1980 MHz 12 dB. A Pg 1 of 2 . and convey alarm conditions from.1dB The Powerwave® CIN ID is a Current Injector for indoor use. The unit features advanced lightning protection circuits acting as surge protection for the BTS. a Tower Mounted Amplifier via the coaxial feeder cable. The CIN is to be mounted indoor close to the base station antenna ports and provides the ability to apply DC power to. Standard connector gender configuration is male to the BTS port and female to the antenna port. Key Benefits: • • • • • Broadband design Negligible insertion loss Integrated lightning protection Robust design AISG/3GPP compatible D031-08407 Rev.Current Injector Broadband Indoor Current Injector Part Number: LGP233nn Frequency Range: 806-960 and 1710-2170 MHz Return Loss: >20dB Insertion Loss: <0. DC supply cables are available in standard lengths with various connectors according to requirements. The broadband design covers 800/900/1800/1900/2100 MHz frequency bands. This eliminates the need for traditional lightning arresters in the BTS. A version with reversed gender configuration is also available. It also supports AISG/3GPP data communication. 32 kg (0. Contact your Powerwave representative for complete performance data. Andrew Place Santa Ana.powerwave. ETL EN 605 29 ETS 300 019 IEC 61312-1 o o o o All specifications are subject to change without notice. Mechanical Specifications Size. Inc.5 A <-116 dBm (<-159) -5 C to +55 C (23 F to +131 F) >1 000 000 hours (over 100 years) EN 609 50. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2006. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. All Rights reserved. IP54 Environmental Lightning Protection *Typical LGP233nn 806-960 and 1710-2170 >20 <0.1 1. max Intermodulation: @ 2 x 43 dBm TX Carriers (dBc) Temperature range MTBF Safety Ingress Protection. W x H x D (incl.4 x 1.6 x 2. Powerwave Technologies.0 inch) 0. Inc. Powerwave.71 lbs) Silver plating Zink Alloy DIN 7/16 female and male SMB male Product numbers LGP23301 LGP23302 Pg 2 of 2 BTS/NodeB Connector Male Female ANT Connector Female Male D031-08407 Rev.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. UL 609 50.Current Injector Broadband 806-960\1710-2170 MHz Electrical Specifications Product number Frequency range (MHz) Return Loss (dB) Insertion Loss* (dB) DC Current. A Corporate Headquarters Powerwave Technologies. Inc. . 7/16 connectors) Weight Color Housing RF-connectors DC Supply Connector 87 x 41 x 51 mm (3. Powerwave Technologies. 1801 East St. Standard connector gender configuration is male to the BTS port and female to the antenna port.1 dB The Powerwave® CIN OD is a Current Injector for outdoor use. The broadband design covers 800/900/1800/1900/2100 MHz frequency bands. It also supports AISG / 3GPP data communication.Current Injector Broadband Outdoor Current Injector Part Number: LGP213nn Frequency Range: 806-960 and 1710-2170 MHz Return Loss: >20 dB Insertion Loss: <0. DC supply cables are available in standard lengths with various connectors according to requirements. A version with reversed gender configuration is also available. a Tower Mounted Amplifier via the coaxial feeder cable. A Pg 1 of 2 . Key Benefits: • • • • • Broadband design Negligible Insertion Loss Integrated Lightning Protection Robust Design AISG/3GPP compatible D031-08406 Rev. This eliminates the need for traditional lightning arresters in the BTS. The Current Injector provides the ability to apply DC power to. and convey alarm conditions from. The unit features advanced lightning protection circuits acting as surge protection for the BTS. Current Injector Broadband 806-960/1710-2170 MHz Electrical Specifications Product Number Frequency range, 2 variants (MHz) Return Loss (dB) Insertion Loss* (dB) DC Current, max Intermodulation: @ 2x 43 dBm Tx carriers (dBc) Temperature range MTBF Safety Ingress protection, IP 68 Environmental Lightning Protection LGP213nn 806 - 960MHz and 1710-2170 >20 < 0.1 1.5 A <-116 dBm (<-159) -40 C to +65 C (-40 F to +149 F) >1 000 000 hours EN 609 50, UL 60950, ETL EN 60 529 ETS 300 019 IEC 61312-1 o o o o *Typical All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. Mechanical Specifications Size, W x H x D (incl. 7/16 connectors) Weight Color Housing RF-connectors DC-connector 87 x 41 x 51 mm (3.4 x 1.6 x 2.0 in) 0.32 kg (0.71 lbs) Off-white, NCS 1502R Aluminum DIN 7/16 female and male SMA female Product number LGP21301 LGP21302 Pg 2 of 2 BTS/NodeB Connector Male Female ANT Connector Female Male D031-08406 Rev. A Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Power Distribution Unit (PDU) PDU Lite™ – Indoor Part Number: LGP121nn Input Current: Max 1A Output Current: Max 375 mA/port Input Voltage: 20-60 V DC, positive or negative PDU Lite The Powerwave Power Distribution Unit (PDU Lite) is intended for indoor use and supplies power to the Tower Mounted Amplifier (TMA) via the Current Injectors. The PDU Lite is a truly modular unit, each module supplying two TMAs. This unit enables TMA installations to be carried out on a per sector basis and can be easily combined to provide solutions for all common site configurations. PDU Lite is available as a stand alone unit or as a 1 to 3 module 19” panel and has isolated input and output ports that can cater to both positive and negative DC supplies. Key Benefits: • Operates regardless of +24 or - 48 VDC • Compact design for cramped BTS cabinets • Easy upgrade for BTS expansion Power Distribution Unit Power Distribution Unit Electrical Specifications Input Voltage Input Current, Max Input Protection and Polarity No. of TMA Output Ports Output Voltage 20-60 V DC, positive or negative 1A Automatic Polarity Agile 2 12 V DC +/- 1 V 375 mA/port Automatic short-circuit protection, auto recovery Low Current/High Current Open Circuit/Short Circuit Sum Alarm Output Port Relay Normally Open and Normally Closed PDU Lite Output Current, Max Output Protection Alarm Functionality All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data. Mechanical Specifications Size, WxHxD Weight Housing Input Voltage Connector Output Connector Alarm Output Connector Output Voltage Indicator Output Port Current Indicator, One Per Port Temperature Range Humidity MTBF Rack Mounting Kit: Housing Weight No. of Modules Dimensions, 19” Safety Environmental EMC 100 x 20 x 60 mm (3.9 x 0.8 x 2.4 in) 120g (0.3 lbs) Aluminum 3 Pole Connector, Molex 2 x 3 Pole Connector, Molex 3 Pole Connector, Molex Green when OK Green when OK o o o o -40 C to +65 C (-40 F to +149 F) 5-95% RH non condensing >1 000 000 hours (over 100 years) Aluminum 300 g 1.3 1U x 70 mm (1.75 x 2.8 in) EN 60 950, UL 1950 ETS 300 019 ETS 300 342-3 Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN LGP121nn Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Clean Site Solution TM Single Sector Single Sector Multi Band Solutions Antenna / TMA / RET Simpler Logistics Easier Installation Lower Noise Figure 0.3 to 0.5 dB less TX loss As a part of Powerwave's CleanSite solutions the Single sector offers a flexible way of integrating products from Powerwave's extensive range of antenna system products in one single radome. The Single sector solution offers maximum sector coverage with minimum visual impact. The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. High-volume production in several countries ensures a rapid delivery. Our products provide design and installation flexibility that answers any needs, such as enabling co-siting of networks and systems, dealing with space and zoning issues limiting the appearance and location of new installations. Key Benefits: • • • • • • • • Multi sector coverage Simplified Site Acquisition Less Visual Impact “Zoning” Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance Preliminary –to be changed without further notice Clean SiteTM Single sector Solution Antenna system numbering PPPP.QRS.TUVX.YZ R PPPP Q RS T U V X YZ part number antenna Tilt variant Concept RET Functionality RET SW # of TMAs per sector # of combined filter bands per sector Variant # M S 1 2 3 1 2 3 0 F U C T D 0 U 0 1 2 3 4 5 6 X 0 2 3 E Description Monopole 1 sector Monopole 2 sector Monopole 3 sector Intellimast 1 sector Intellimast 2 sector Intellimast 3 sector Standard antenna No bracket Standard antenna Fixed bracket Standard antenna Connector up Standard antenna Combined F&U Standard antenna Tilt bracket Standard antenna Combined T&U Single sector Clean Site Description No RET AISG SW Ericsson Siemens 3GPP AISG/Ericsson AISG/Siemens Description No Filters 2 diplexers per sector 2 triplexers per sector Empty Filter box incl Q 0 1-9 Description Standard tilt range Shifted tilt variants I Single sector S C T 0 1 2 3 A B C V 0 1 2 E Description No RET 1 RET controlled band 2 RET controlled bands 3 RET controlled bands i-RET (male connector) i-RET (male+female connector) i-RET (male+male) Description No TMA 1 TMA per sector 2 TMA per sector Empty TMA box incl By integrating our products together, a large number of values are added: • • • • • One Clean Site product instead of several products (Antenna, TMA, RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits. This gives a faster time to market and less administrative cost. One Clean Site product to order and install gives simpler logistics and easier installations. Elimination of feeders between TMA and Antenna gives 0.3 to 0.5 dB lower Noise Figure and 0.3 to 0.5 dB less TX loss. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity. This gives an improved quality of service and increased traffic, higher revenue. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. Powerwave Clean Site gives less investment cost and increased revenue. PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Preliminary –to be changed without further notice Clean Site Single System Solution TM Single System Multi-band Solutions Antenna / TMA / RET Simpler Logistics Easier Installations Lower Noise Figure 0.3 to 0.5 dB Less TX Loss Clean Site The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. High-volume production in several countries ensures a rapid delivery. Our products provide design and installation flexibility that answers any needs, such as enabling co-siting of networks and systems, dealing with space and zoning issues limiting the appearance and location of new installations. Key Benefits: • • • • • • • Simplified Site Acquisition Less Visual Impact “Zoning” Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance D031-08278 Rev A Pg. 1 of 2 Clean SiteTM Single System Solution Example Clean Site By integrating our products together. One Clean Site product to order and install gives simpler logistics and easier installations. Powerwave. RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits. 1801 East St. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. Inc. • • • • Pg. Clean Site Single system configured with Antenna (18dBi) + TMA (variable gain 24-32db) +RE . Elimination of feeders between TMA and Antenna gives 0. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity.5 dB less TX loss. Powerwave Clean Site gives less investment cost and increased revenue. All Rights reserved. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003.5 dB lower Noise Figure and 0. higher revenue. Andrew Place Santa Ana. Inc.3 to 0.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.3 to 0. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. This gives an improved quality of service and increased traffic. Powerwave Technologies. Powerwave Technologies. This gives a faster time to market and less administrative cost. a large number of values are added: • One Clean Site product instead of several products (Antenna. TMA. Inc.powerwave. 2 of 2 D031-08278 Rev A Corporate Headquarters Powerwave Technologies. 5 dB less TX loss Clean Site The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. dealing with space and zoning issues limiting the appearance and location of new installations. Key Benefits: • • • • • • • Simplified Site Acquisition Less Visual Impact “Zoning” Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance D031-08277 Rev A Pg. High-volume production in several countries ensures a rapid delivery. 1 of 2 . such as enabling co-siting of networks and systems.Clean Site Dual System Solution TM Dual System Multi Band Solutions Antenna / TMA / RET Simpler Logistics Easier Installation lower Noise Figure 0. Our products provide design and installation flexibility that answers any needs.3 to 0. 5 dB less TX loss. 2 of 2 D031-08277 Rev A Corporate Headquarters Powerwave Technologies. 1801 East St. Powerwave Clean Site gives less investment cost and increased revenue. This gives a faster time to market and less administrative cost. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5/18 17. a large number of values are added: • • • • • One Clean Site product instead of several products (Antenna. Pg.5/16. Inc.5/18 15. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity.5i-A-D UXCM-1710-2170-90-18i-A-D UXCM-1710-2170-90-16. Powerwave Technologies. Powerwave Technologies.5/18 Gain 12 23-32 (variable) 12 24 12 24 Clean Site Filter Description TMD 800-900/1800-2100 TMD 800-900/1800-2100 TMD 800-900/1800-2100 TMD 800-900/1800-2100 TMD 1800/UMTS SH TMD 1800/UMTS SL TMD 1800/UMTS D TMD 1800/UMTS X X D SH SL Frequency Band DC path 824-960/1710-2170 No DC path 824-960/1710-2170 824-960/1710-2170 824-960/1710-2170 1710-2170 824-960/1710-2170 824-960 1710-1880/1920-2170 1920-2170 1710-1880/1920-2170 1710-1880 1710-1880/1920-2170 1710-1880/1920-2170 1710-1880/1920-2170 No DC path Number 7020. Inc.00 7762. RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits.00 7766.5/18i-A-D AXCM-824-960/1710-2170-65-18/18i-A-D TMA 2100 2100 1900 1900 1800 1800 Description MHz 12dB Gain MHz VG (23-32) dB Gain MHz 12 dB Gain MHz 24 dB Gain MHz 12 dB Gain MHz 24 dB Gain HBW 65/65 65/65 90/90 90/90 67/65 67/65 67/65 Frequency Band 1920-2170 1920-2170 1850-1990 1850-1990 1710-1880 1710-1880 Gain 18/18 19. Elimination of feeders between TMA and Antenna gives 0. Powerwave.5 18/18 16. One Clean Site product to order and install gives simpler logistics and easier installations. TMA. Clean Site Dual system configured with: Dual band antenna (2x18dBI)+ 2xTMA (12dB) + 2xRET (AISG) . Andrew Place Santa Ana.5i-A-D AXCM-824-960/1710-2170-65-15/18i-A-D AXCM-824-960/1710-2170-65-16.00 RET Description Dual system unit Voltage Range 9-30 V By integrating our products together.Clean SiteTM Dual System Solution Example Part Number 7760. All Rights reserved.5/19.00 7752.00 7750. Inc. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. This gives an improved quality of service and increased traffic.00 7765.00 7755.powerwave.5 14. higher revenue.00 Number 16720 16721 18607 18608 18507 18508 t Number 21901 21902 21903 21904 23201 23202 23203 23204 Antenna Description UXCM-1710-2170-65-18i-A-D UXCM-1710-2170-65-19.5 dB lower Noise Figure and 0.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.3 to 0.3 to 0. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. 2/17. ±0. Powerwave Technologies.0C0. 150 km/h (N) Color 824-960/1710-2170 14.powerwave. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight. All Rights reserved.00 1390 275 229 16 428 RAL 7035 850 MHz & 900MHz 1800 MHz & 1900 MHz PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Inc.5 < 1.Dual Band Single sector antenna Product Number Number of sectors 7750.6°±1° 2 °-10°/0°-8° <-110dBm 7750. unconfigured (kg) Wind Load. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Inc. Inc. Frontal.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5:1 >30 69°±6°/63°±7° 14.0000. Powerwave Technologies. Preliminary –to be changed without further notice . Powerwave. 1801 East St.3°±2°/6.00 1 Single sector Electrical performance Frequency Band (MHz) Gain.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. Andrew Place Santa Ana. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Preliminary –to be changed without further notice . Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Andrew Place Santa Ana.2°±1°/6.00 2020 275 229 20 628 RAL 7035 850 MHz & 900MHz 1800 MHz & 1900 MHz PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies.powerwave.6°±1° 2 °-9°/0°-8° <-110dBm 7752. Inc.9/17. Inc.00 1 Single sector Electrical performance Frequency Band (MHz) Gain. Powerwave. Powerwave Technologies.0000. 150 km/h (N) Color 824-960/1710-2170 15. All Rights reserved.5:1 >30 69°±6°/63°±7° 9.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. ±0. Inc. Frontal. unconfigured (kg) Wind Load. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. 1801 East St.Dual Band Single sector antenna Product Number Number of sectors 7752.0C0.5 < 1. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight. 5:1 >30 69°±6°/63°±7° 9.0C0. Frontal. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. unconfigured (kg) Wind Load. ±0.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation.9/17. Powerwave Technologies. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight.powerwave.5 < 1. Inc. 1801 East St.00 2645 275 229 24 820 RAL 7035 850 MHz & 900MHz 1800 MHz & 1900 MHz PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Inc.Dual Band Single sector antenna Product Number Number of sectors 7755. All Rights reserved. Powerwave. Powerwave Technologies.2°±1°/6. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Preliminary –to be changed without further notice . 150 km/h (N) Color 824-960/1710-2170 15.0000.00 1 Single sector Electrical performance Frequency Band (MHz) Gain.6°±1° 2 °-9°/0°-8° <-110dBm 7755.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Andrew Place Santa Ana. Inc. High-volume production in several countries ensures a rapid delivery. such as enabling co-siting of networks and systems. dealing with space and zoning issues limiting the appearance and location of new installations. Key Benefits: • • • • • • • Simplified Site Acquisition Less Visual Impact “Zoning” Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance D031-08279 Rev A Pg. 1 of 2 .5 dB less TX loss Clean Site The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space.Clean Site Triple System Solution TM Triple Band Multi Band Solutions Antenna / TMA / RET Simpler Logistics Easier Installation lower Noise Figure 0.3 to 0. Our products provide design and installation flexibility that answers any needs. a large number of values are added: • • • • • One Clean Site product instead of several products (Antenna. TMA. RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits.00 Antenna Description ALXT-824-960/2x1710-2170-15i-A-D ALXT-824-960/2x1710-2170-17i-A-D ALXT-824-960/2x1710-2170-18i-A-D HBW 69/65/62 69/65/62 69/65/62 Gain 14.00 RET Description Triple system unit Voltage Range 9-30 V By integrating our products together. This gives an improved quality of service and increased traffic. Powerwave Clean Site gives less investment cost and increased revenue. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 2 of 2 D031-08279 Rev A Corporate Headquarters Powerwave Technologies. Powerwave Technologies. Inc.powerwave.5/15.5 Clean Site TMA Part Number 16720 16721 18607 18608 18507 18508 Filter Part Number 21901 21902 21903 21904 23201 23202 23203 23204 14108 14109 14110 TMA Description 2100 MHz 12dB Gain 2100 MHz VG (23-32) dB Gain 1900 MHz 12 dB Gain 1900 MHz 24 dB Gain 1800 MHz 12 dB Gain 1800 MHz 24 dB Gain Filter Description TMD 800-900/1800-2100 X TMD 800-900/1800-2100 D TMD 800-900/1800-2100 SH TMD 800-900/1800-2100 SL TMD 1800/UMTS SH TMD 1800/UMTS SL TMD 1800/UMTS D TMD 1800/UMTS X TMT UMTS/900/1800 SMH TMT UMTS/900/1800 SSH TMT UMTS/900/1800 SLH Frequency Band 1920-2170 1920-2170 1850-1990 1850-1990 1710-1880 1710-1880 Gain 12 23-32 (variable) 12 24 12 24 Frequency Band DC path 824-960/1710-2170 No DC path 824-960/1710-2170 824-960/1710-2170 824-960/1710-2170 1710-2170 824-960/1710-2170 824-960 1710-1880/1920-2170 1920-2170 1710-1880/1920-2170 1710-1880 1710-1880/1920-2170 1710-1880/1920-2170 1710-1880/1920-2170 No DC path 824-960/1710-1880/1920-2170 1710-1880 824-960/1710-1880/1920-2170 1920-2170 824-960/1710-1880/1920-2170 824-960 RET Part Number 7030. One Clean Site product to order and install gives simpler logistics and easier installations.Clean SiteTM Triple System Solution Example Antenna Part Number 7780. Clean Site Triple Band system configured with TB Antenna (15dBi) + TMA UMTS (12dB) + TB RET (AISG) + 2xTPX filter . All Rights reserved. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity. 1801 East St. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai.00 7782. Pg. This gives a faster time to market and less administrative cost.5/17/17 17/17.5/15/15 16. Inc. Powerwave. Andrew Place Santa Ana. Inc. higher revenue.5 dB less TX loss. Powerwave Technologies.00 7785.3 to 0. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections.3 to 0.5 dB lower Noise Figure and 0. Elimination of feeders between TMA and Antenna gives 0. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 5:1 >30 68°±5°/65°±5°/ 62°±5° 14°±2°/14.0000.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.powerwave.°±1°/ 13°±1° 2 °-12°/0°-12°/ 0 °-12° <-110dBm 7780.8 < 1. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. Inc. 150 km/h (N) Color 824-960/1710-2170/1710-2170 14. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Andrew Place Santa Ana. unconfigured (kg) Wind Load.00 1 Single sector Electrical performance Frequency Band (MHz) Gain.4/14. Powerwave.Triple Band Single sector antenna Product Number Number of sectors 7780.5/14.00 1390 275 229 18. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Preliminary –to be changed without further notice . 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight. All Rights reserved. ±0.0C0. Powerwave Technologies. Inc. 1801 East St.5 428 RAL 7035 850 MHz & 900MHz 1800 MHz & 1900 MHz 2100MHz PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Frontal. Powerwave Technologies. 5:1 >30 67°/65°/ 64° 9°±1°/10°±1°/ 9°±1° 2 °-9°/0°-10°/ 0 °-10° <-110dBm 7782.5/16. Inc. unconfigured (kg) Wind Load.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. Inc. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight.00 2020 275 229 21. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003.0C0. All Rights reserved.8 < 1.5 628 RAL 7035 850MHz & 900MHz 1800MHz & 1900MHz 2100MHz PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Powerwave Technologies. Preliminary –to be changed without further notice . Andrew Place Santa Ana. 1801 East St. 150 km/h (N) Color 824-960/1710-2170/1710-2170 16.powerwave.5/16. Inc. Frontal.00 1 Single sector Electrical performance Frequency Band (MHz) Gain. ±0.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.0000. Powerwave.Triple Band Single sector antenna Product Number Number of sectors 7782. 5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. unconfigured (kg) Wind Load. All Rights reserved. Frontal. Inc.5 < 1. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight. 1801 East St.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. Andrew Place Santa Ana. ±0. Powerwave Technologies.Triple Band Single sector antenna Product Number Number of sectors 7785.00 2645 275 229 27.5:1 >30 65°/65°/ 62° 7°/7°/6° 2 °-8°/0°-8°/ 0 °-8° <-110dBm 7785. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave.4/17.5 820 RAL 7035 850MHz & 900MHz 1800MHz & 1900MHz 2100MHz PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies.2/17.powerwave. Inc. Preliminary –to be changed without further notice .0C0.0000.00 1 Single sector Electrical performance Frequency Band (MHz) Gain. 150 km/h (N) Color 824-960/1710-2170/1710-2170 17. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. High-volume production in several countries ensures a rapid delivery. The MonoPole solution offers maximum sector coverage with minimum visual impact.5 dB less TX loss MonoPole As a part of Powerwaves CleanSite solutions the MonoPole offers a flexible way of integrating multi sector solutions in one single radome. such as enabling co-siting of networks and systems.Clean Site MonoPole Solution TM MonoPole Multi Band Solutions Antenna / TMA / RET Simpler Logistics Easier Installation Lower Noise Figure 0. The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. dealing with space and zoning issues limiting the appearance and location of new installations. MonoPole is the mounting solution to use when more than one sector is covered from a single location.3 to 0. Key Benefits: • • • • • • • • Multi sector coverage Simplified Site Acquisition Less Visual Impact “Zoning” Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance Preliminary –to be changed without further notice . Our products provide design and installation flexibility that answers any needs. Clean SiteTM MonoPole Solution Antenna system numbering PPPP. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Preliminary –to be changed without further notice . Powerwave Technologies. PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies.3 to 0. Powerwave Clean Site gives less investment cost and increased revenue. All Rights reserved. a large number of values are added: • • • • • One Clean Site product instead of several products (Antenna. This gives a faster time to market and less administrative cost.5 dB less TX loss. Powerwave. One Clean Site product to order and install gives simpler logistics and easier installations. 1801 East St.TUVX.QRS. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. Inc.3 to 0.5 dB lower Noise Figure and 0.powerwave.YZ R Basic config Integration config M PPPP Q RS part number antenna Tilt variant Concept RET Functionality RET SW # of TMAs per sector # of combined filter bands per sector Variant # S 1 2 3 1 2 3 0 F U C T D 0 U 0 1 2 3 4 5 6 X 0 2 3 E Description Monopole 1 sector Monopole 2 sector Monopole 3 sector Intellimast 1 sector Intellimast 2 sector Intellimast 3 sector Standard antenna No bracket Standard antenna Fixed bracket Standard antenna Connector up Standard antenna Combined F&U Standard antenna Tilt bracket Standard antenna Combined T&U Single sector Clean Site Description No RET AISG SW Ericsson Siemens 3GPP AISG/Ericsson AISG/Siemens Description No Filters 2 diplexers per sector 2 triplexers per sector Empty Filter box incl Q 0 1-9 Description Standard tilt range Shifted tilt variants I MonoPole T U V X YZ S C T 0 1 2 3 A B C V 0 1 2 E Description No RET 1 RET controlled band 2 RET controlled bands 3 RET controlled bands i-RET (male connector) i-RET (male+female connector) i-RET (male+male) Description No TMA 1 TMA per sector 2 TMA per sector Empty TMA box incl By integrating our products together. This gives an improved quality of service and increased traffic.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity. Elimination of feeders between TMA and Antenna gives 0. Andrew Place Santa Ana. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. TMA. Powerwave Technologies. Inc. RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits. Inc. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. higher revenue. 6° 0°-8° <-110dBm 7721. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @ 40m/s (N) Color 7721. Inc.powerwave. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003.00 data sheet Space for TMAs included in design Accessories for Monopole Ø340 ACS50 Base ACS51 Platform ACS04 Cable inlet ACS05 Roof adapter ACS52 1m Extension ACS54 Hinge kit ACS55 Lightning pole ACS56 Cable kit ACS57 TMA installation bracket PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies.00 3 +/-15 degrees 1710-2170 18 < 1.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation.6°±0. Preliminary –to be changed without further notice .00 MonoPole 2215 340 53 1200 @ 60 feet RAL 7035 For additional antenna data. check the 7721. Powerwave. ±0. Inc. All Rights reserved. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 1801 East St. Powerwave Technologies. Powerwave Technologies. Andrew Place Santa Ana.0M3. Inc.Trisector 1800/UMTS Single Broad Band MonoPole antenna Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.0000.5:1 >30 65°±5° 6. 1M3.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. ±0. 1801 East St. Inc. Powerwave Technologies. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @ 40m/s (N) Color 7721.powerwave. Preliminary –to be changed without further notice .0000.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation.02 MonoPole 2215 340 53 1200 @ 60 feet RAL 7035 For additional antenna data. check the 7721. Inc. Powerwave. All Rights reserved. Andrew Place Santa Ana.Trisector 1800/UMTS Single Broad Band MonoPole antenna Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies.02 data sheet Space for TMAs included indesign Accessories for Monopole Ø340 ACS50 Base ACS51 Platform ACS04 Cable inlet ACS05 Roof adapter ACS52 1m Extension ACS54 Hinge kit ACS55 Lightning pole ACS56 Cable kit ACS57 TMA installation bracket PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies.00 3 +/-15 degrees 1710-2170 18 < 1. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003.6°±0. Inc.6° 2°-10° <-110dBm 7721.5:1 >30 65°±5° 6. 1801 East St.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.powerwave. ±0.6°±0. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @ 40m/s (N) Color 7721. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Preliminary –to be changed without further notice .06 MonoPole 2215 340 53 1200 @ 60 feet RAL 7035 For additional antenna data.5:1 >30 65°±5° 6. Inc. Powerwave Technologies.6° 6°-14° <-110dBm 7721. please check the 7721. All Rights reserved.3M3. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003.0000. Powerwave.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. Andrew Place Santa Ana.06 data sheet Space for TMAs included in design Accessories for Monopole Ø340 ACS50 Base ACS51 Platform ACS04 Cable inlet ACS05 Roof adapter ACS52 1m Extension ACS54 Hinge kit ACS55 Lightning pole ACS56 Cable kit ACS57 TMA installation bracket PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Inc.00 3 +/-15 degrees 1710-2170 18 < 1.Trisector 1800/UMTS Single Broad Band MonoPole antenna Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain. 0. Powerwave Technologies. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.1 ACS07.3 ACS07. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. triple band Cable kit.com Corporate Headquarters Powerwave Technologies. Andrew Place Santa Ana.00 1850 500 100 1130 @ 60 feet RAL 7035 Accessories Extension tube. Preliminary –to be changed without further notice .com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5 < 1.3°±2°/6. 2 boxes+antenna Cable kit.00 3 +/-15 degrees in 5deg steps MonoPole 824-960/1710-2170 14. All Rights reserved.0000. dual band Cable kit.5m Cable inlet Roof adapter Lightning Pole Door kit.6°±1° 2 °-10°/0°-8° <-110dBm 7750.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. 2m Wire sustaining ring TMA/Filter mounting tube.0M3.powerwave. Ant-TMA Cable fixation plate ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.4 ACS10 ACS11 ACS12 ACS20 Interface drawing: antenna_interface. ±0. 1801 East St.Trisector 900/UMTS Dual Broad Band MonoPole Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain. Powerwave Technologies. Antenna Door kit.5:1 >30 69°±6°/63°±7° 14. Inc.powerwave.2/17. Inc. Powerwave.2 ACS07. 1 box Door kit. Inc. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @ 40m/s (N) Color 77500.dxf www. 1 box+antenna Door kit. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PNCleanSiteTripleSystem ©Copyright February 2003. 2 ACS07. Inc. 2m Wire sustaining ring TMA/Filter mounting tube. Andrew Place Santa Ana. Inc. 2 boxes+antenna Cable kit.Trisector 900/UMTS Dual Broad Band MonoPole Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain.powerwave.3 ACS07. Powerwave Technologies.4 ACS10 ACS11 ACS12 ACS20 Interface drawing: antenna_interface. Powerwave Technologies. ±0.dxf www. Inc.6°±1° 2 °-9°/0°-8° <-110dBm 7752.1 ACS07.0M3. 1 box+antenna Door kit.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.5m Cable inlet Roof adapter Lightning Pole Door kit. dual band Cable kit.00 2500 500 125 1530 @ 60 feet RAL 7035 Accessories Extension tube.9/17. All Rights reserved. Preliminary –to be changed without further notice . CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 0.0000. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PNCleanSiteTripleSystem ©Copyright February 2003.powerwave. 1801 East St. Antenna Door kit.2°±1°/6.5:1 >30 69°±6°/63°±7° 9. Ant-TMA Cable fixation plate ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07. triple band Cable kit. Powerwave. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @40m/s (N) Color 7752.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation.00 3 +/-15 degrees in 5deg steps MonoPole 824-960/1710-2170 15.5 < 1.com Corporate Headquarters Powerwave Technologies. 1 box Door kit. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Preliminary –to be changed without further notice .9/17. Antenna Door kit.2 ACS07. 2m Wire sustaining ring TMA/Filter mounting tube.5 < 1.powerwave.dxf www.3 ACS07.1 ACS07.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. 0.com Corporate Headquarters Powerwave Technologies. Ant-TMA Cable fixation plate ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.00 3100 500 150 1900 @ 60 feet RAL 7035 Accessories Extension tube.powerwave.Trisector 900/UMTS Dual Broad Band MonoPole Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain. Inc. Powerwave Technologies.0000. Inc.0M3. ±0.5:1 >30 69°±6°/63°±7° 9. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PNCleanSiteTripleSystem ©Copyright February 2003.00 3 +/-15 degrees in 5deg steps MonoPole 824-960/1710-2170 15.6°±1° 2 °-9°/0°-8° <-110dBm 7755. Inc.4 ACS10 ACS11 ACS12 ACS20 Interface drawing: antenna_interface. 1 box+antenna Door kit. 1801 East St. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Andrew Place Santa Ana. 2 boxes+antenna Cable kit. 1 box Door kit.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @40m/s /(N) Color 7755.5m Cable inlet Roof adapter Lightning Pole Door kit. Powerwave. triple band Cable kit. dual band Cable kit.2°±1°/6. Powerwave Technologies. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. All Rights reserved. 0. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.00 3 +/-15 degrees in 5deg steps MonoPole 824-960/1710-2170/1710-2170 14. Powerwave Technologies.5m Cable inlet Roof adapter Lightning Pole Door kit.4/14.00 1850 500 105 1130 @ 60 feet RAL 7035 Accessories Extension tube. Inc. 2 boxes+antenna Cable kit.0M3.8 < 1. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @40m/s (N) Color 7780. Inc.5:1 >30 68°±5°/65°±5°/ 62°±5° 14°±2°/14. ±0. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PNCleanSiteTripleSystem ©Copyright February 2003.4 ACS10 ACS11 ACS12 ACS20 Interface drawing: antenna_interface.°±1°/ 13°±1° 2 °-12°/0°-12°/ 0 °-12° <-110dBm 7780. Andrew Place Santa Ana.dxf www.1 ACS07.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. 2m Wire sustaining ring TMA/Filter mounting tube.2 ACS07.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.5/14.Trisector 900/1800/UMTS Triple Broad Band MonoPole Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain. 1801 East St. Preliminary –to be changed without further notice . Antenna Door kit. triple band Cable kit.powerwave. 1 box Door kit. 1 box+antenna Door kit. Inc.com Corporate Headquarters Powerwave Technologies. All Rights reserved. dual band Cable kit. Powerwave. Ant-TMA Cable fixation plate ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.0000.3 ACS07. Inc. 0.0M3. Antenna Door kit.0000. Powerwave Technologies. 2 boxes+antenna Cable kit.4 ACS10 ACS11 ACS12 ACS20 Interface drawing: antenna_interface.8 < 1. 2m Wire sustaining ring TMA/Filter mounting tube.5m Cable inlet Roof adapter Lightning Pole Door kit. 1 box+antenna Door kit.com Corporate Headquarters Powerwave Technologies. Inc.5/16. Andrew Place Santa Ana. 1801 East St.Trisector 900/1800/UMTS Triple Broad Band MonoPole Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain. 1 box Door kit. triple band Cable kit. All Rights reserved.00 3 +/-15 degrees in 5deg steps MonoPole 824-960/1710-2170/1710-2170 16.dxf www. Powerwave Technologies. Ant-TMA Cable fixation plate ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.2 ACS07. Inc. Preliminary –to be changed without further notice . CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.5/16. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PNCleanSiteTripleSystem ©Copyright February 2003. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @40m/s (N) Color 7782. Powerwave.1 ACS07.powerwave.3 ACS07.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.powerwave.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.00 2500 500 130 1530 @ 60 feet RAL 7035 Accessories Extension tube. ±0.5:1 >30 67°/65°/ 64° 9°±1°/10°±1°/ 9°±1° 2 °-9°/0°-10°/ 0 °-10° <-110dBm 7782. dual band Cable kit. com Corporate Headquarters Powerwave Technologies. 1 box Door kit. dual band Cable kit.3 ACS07.powerwave. 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Wind load @40m/s (N) Color 7785. 1 box+antenna Door kit.dxf www. All Rights reserved. Antenna Door kit. Preliminary –to be changed without further notice .4 ACS10 ACS11 ACS12 ACS20 Interface drawing: antenna_interface. Andrew Place Santa Ana.00 3 +/-15 degrees in 5deg steps MonoPole 824-960/1710-2170/1710-2170 17.5 < 1.5:1 >30 65°/65°/ 62° 7°/7°/6° 2 °-8°/0°-8°/ 0 °-8° <-110dBm 7785. Inc.0M3.00 3100 500 155 1900 @ 60 feet RAL 7035 Accessories Extension tube. Ant-TMA Cable fixation plate ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation.powerwave. Powerwave.4/17.2/17.1 ACS07. Inc. triple band Cable kit. Powerwave Technologies. 2 boxes+antenna Cable kit. Powerwave Technologies. Inc. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.5m Cable inlet Roof adapter Lightning Pole Door kit. ±0.2 ACS07. 1801 East St. 0.0000. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 PNCleanSiteTripleSystem ©Copyright February 2003.Trisector 900/1800/UMTS Triple Broad Band MonoPole Product Number Number of sectors Azimuth variation Electrical performance Frequency Band (MHz) Gain.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. 2m Wire sustaining ring TMA/Filter mounting tube. Powerwave Technologies.powerwave. Andrew Place Santa Ana. 1801 East St. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.Base for MonoPole Product Number Supports MonoPole with Ø340 Support up to 5200 mm build height Maximum roof slope 10º ACS50 MonoPole Physical Dimensions Height (mm) Side length (mm) Weight (kg) Color 754 3540 1200 Metal Free standing base MonoPole installations on roof tops. Inc. Powerwave Technologies. Preliminary –to be changed without further notice . PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Inc. Powerwave. All Rights reserved.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies. Inc. Preliminary –to be changed without further notice .powerwave.Platform for MonoPole Product Number Supports MonoPole with Ø340 Support up to 4000m total height Physical Dimensions Height (mm) Side length (mm) Weight (kg) Color ACS51 MonoPole 2500 Metal . Powerwave Technologies.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Andrew Place Santa Ana. Inc. All Rights reserved. 1801 East St. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. Powerwave. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Cable inlet Product Number Supports MonoPole with Ø340 and Ø500 Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Color ACS04 MonoPole 190 496 23 Metal PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Powerwave Technologies. Powerwave Technologies. Andrew Place Santa Ana. Preliminary –to be changed without further notice .com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. All Rights reserved. Inc.powerwave. Powerwave. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. 1801 East St. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Inc. Inc. Inc.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies. Powerwave.Roof Adapter Product Number ACS05 Physical Dimensions Height (mm) Diameter (mm) Weight (kg) 170 550 37 Metal MonoPole Color PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Andrew Place Santa Ana. All Rights reserved. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Preliminary –to be changed without further notice . 1801 East St. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Inc. 1801 East St.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Inc.1m Extension Product Number Supports MonoPole with Ø340 Height of steps (mm) Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Color 250 ACS52 MonoPole 1000 340 31 RAL 7035 Extension tube with built in ladder Doors as cover of internal structure PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Inc. Powerwave Technologies. Powerwave Technologies. Preliminary –to be changed without further notice .powerwave. All Rights reserved. Andrew Place Santa Ana. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Inc. Powerwave Technologies.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.powerwave. Inc. All Rights reserved. Andrew Place Santa Ana. 1801 East St. Powerwave Technologies. Preliminary –to be changed without further notice . CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Can be used during installation for simplified raise of MonoPole. Inc. Powerwave.Hinge kit Product Number Supports MonoPole with Ø340 ACS54 MonoPole Physical Dimensions Weight (kg) Color RAL 7035 Removable hinge kit for MonoPole installations. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Andrew Place Santa Ana.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.powerwave. Preliminary –to be changed without further notice . 1801 East St. Inc. Inc. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Powerwave Technologies. Powerwave Technologies.Adapter plate Product Number Supports MonoPole with Ø340 Thickness (mm) Diameter (mm) 12 496 ACS55 MonoPole PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Powerwave. Inc. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. All Rights reserved. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. Inc. All Rights reserved. Powerwave Technologies.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.Cable kit Product Number Supports MonoPole with Ø340 No. Powerwave Technologies. Preliminary –to be changed without further notice . Inc. 1801 East St. Inc.powerwave. Andrew Place Santa Ana. Powerwave. of cables Cable type Length (mm) 6 ½” ACS56 MonoPole Cable kit interconnect between Antennas and TMAs PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai.TMA installation bracket kit Product Number Supports MonoPole with Ø340 ACS57 MonoPole No. Inc. 1801 East St. Powerwave. of brackets Weight (kg) Width (mm) Height (mm) Width (mm) Mounting hard ware for TMAs included 3 145 410 2 PNCleanSiteTripleSystem Corporate Headquarters Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright February 2003. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Inc. Powerwave Technologies. All Rights reserved. Powerwave Technologies. Inc. Preliminary –to be changed without further notice .powerwave. Andrew Place Santa Ana. 0x 7182.x0A 7225.5 meter with three brackets use 7456.0x 7216.0x Key Benefits: • Robust and reliable design • Accessory products available • Easy to install • Pre mounted on antennas D031-08419 Rev.00 Family HBB Urban Xurban Metro AL antennas Part Number 7720.xx/7183.0x/7228.x0/7722.0x/7231.33.x0/7735.xx/7198.9 lbs All Powerwave antennas shorter than 1.xx/7195.0x/7281.00.xx/7221. A Pg.0x/7218.xx 7337.0x/7226.00A Antenna length: < 1. For a reference list of accessory products see mechanical specification on page 2.xx/7194.xx/ 7200.0x/7255.0x/72320x/7233.5 meter/5 feet Weight: 3.6 kg/7.0x/ 7276.0x/ 7277.11.xx/7184.0x/7338.0x/7227.0x/7339.0x/7263.4168.0x/7282. Below is a list outlining which antennas come with pre-mounted tilt brackets.0x/ 7275.0x/7230.0x/ 7270.00 Antenna Brackets Tilt Bracket Kit Part Number: 7456. 7456.x0/7721.xx/7185.0x/ 7272.1 of 2 .x0A/7745.0x/ 7271.0x/7217.5 meter (5 feet)* shall be installed with Powerwave tilt bracket.x0A/7740.0x/ 7278.xx/7199. *Urban antennas longer than 1.0x/ 7273. 3m All brackets fulfill the requirements stated in the standards below.6 kg/ 7. 35°C.0 25.11/ Big Pole Clamp 7458. Powerwave Technologies. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 Tel: 714-466-1000 Fax: 714-466-5800 www. HxWxD HxWxD Shipping Weight Tilt range Pole dimension Accessory product s 4.4 Ø 8. Antennas are tested together with their corresponding brackets.0 30. 48h.0 15.0 5. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.0 10. D031-08419 Rev. on bracket 0.00 / Flush wall. Andrew Place Santa Ana.8 lbs See diagram 25-125mm Panning Kit 2201.7m 1. Inc.0 0.0 kg/ 8. pole clamp 7455.0 20.4 Ø 8. test Ka. A Pg. 5% salt.4 45 24 Tilt angles for different antenna lengths Packing Size.4 36 29 40-400 Upper Tilt Bracket Top view 160 136 Ø 25-125 200 15 245 All dimensions are in millimeters Mechanical Specifications Dimensions. Inc.com ©Copyright 2006.0 36 29 Lower Tilt Bracket 70 Ø 10. 1801 East St. Powerwave.powerwave. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies.9 lbs Galvanized st eel. Inc.0 35. st ainless screws & nut s Tilt angle 40.Antenna Brackets 70 35 26 Ø 10. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11. All Rights reserved. 2 of 2 Corporate Headquarters Powerwave Technologies. . HxWxD Weight Mat erial See drawing 3.00 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Index No. xx 748x.4168.xx 7218.00 Antenna Brackets Heavy Duty Tilt Bracket Kit Part Number: 7256.xx.x0 7804.1 lbs All Powerwave antennas larger than 1.xx 777x.xx 776x.0x/7333.xx.0x/7330. product number 7256.0x/7334.xx/7144.x0/7850.90 are shipped with pre-mounted brackets.11.5 meters (5 feet) shall be installed with a Powerwave heavy-duty bracket.xx. Key Benefits: • • • • Robust and reliable design Accessory products available Easy to install Pre mounted on antennas D031-08416 Rev.5 meter/5 feet Weight: 5. Please refer to list Family below for antennas that have with pre-mounted heavy duty brackets.00 Antenna length: ≥ 1.xx.5 kg/12.0x All antennas except .00/7824. 1 of 2 .xx.1x 7840.0x/7332.00.33. Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas Part Number 747x.xx 775x.00 7143.x0/7329.xx 778x. A Pg.xx.0x/ 7331.00/7834.xx/7145.00/7838.1x 7227. 5 82-440 Upper Tilt Bracket 49 40 Top view 243 186 143. 1801 East St. 35°C. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. HxWxD HxWxD Shipping Weight Tilt range Pole dimension Panning range Accessory product s 5.3m 2. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. 200 Ø 25-125 . 5% salt. Powerwave Technologies. A Pg.5 90 70 Ø 10. 2 of 2 Corporate Headquarters Powerwave Technologies.powerwave. Inc.0m 2. Inc. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11.5kg/ 12.0 10. D031-08416 Rev.0 1 2 3 4 5 6 7 8 9 1011121314151617181920212223242526 Index No. Powerwave.00 brackets 20. 48h. Antennas are tested together with their corresponding brackets.10 All brackets fulfill the requirements stated in the standards below. Andrew Place Santa Ana.com ©Copyright February 2006.1lbs Galvanized st eel. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 Tel: 714-466-1000 Fax: 714-466-5800 www.Antenna Brackets 90 70 49 Ø 10.0 5. HxWxD Weight Mat erial See drawing 5. Inc. st ainless screws & nut s 29 82 Tilt angles for different antenna lengths with 7256.0 0. Powerwave Technologies. All Rights reserved.6m Packing Size. test Ka.9kg/ 13 lbs See diagram 25-125mm N/ A Heavy Dut y Bracket Panning Kit 2210.0 Tilt angle 15.5 49 40 Lower Tilt Bracket Note: All dimensions are in millimeters Mechanical Specifications Dimensions. on bracket 1. 0x/ 7277.0x/ 7273.xx/7221.0x/7231.xx/7194. Family HBB Urban Xurban Metro AL antennas Part Number 7720.0x/7255.xx/7195.xx/7184.x0A 7225.0x Key Benefits: • Robust and reliable design • Easy to install D031-08520 Rev.x0/7721.0x/ 7276.0x/7228. A Pg.5 meter/5 feet Weight: 9.00 Antenna Brackets Large pole mounting adapter Part Number: 7458.0x/7339.x0/7722.0x/ 7272.xx/ 7200.0x/7218.0x/7217.5 meter/5 feet.0x/72320x/7233.0x/7226.0x/7282.x0A/7745.33.xx/7185.0x 7216.11.0x/7263.0x/7227.0x/7281.4168.0x/ 7271.0x/7338.00 Antennas length: < 1.0x/ 7270.5 kg/20.0x 7182.xx/7199. see table below.xx/7183.xx/7198.0x/7230.xx 7337.x0A/7740.9 lbs Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.0x/ 7275.x0/7735. 1 of 2 .0x/ 7278. Inc. HxWxD 200x200x20 (mm) Shipping Weight Pole dimension Accessory pr oduct s 10 kg/ 22 lbs Max Ø 215 / mm78. 5% salt.9 lbs Galvanized st eel. 35°C. st ainless scr ews & nut s All brackets fulfill the requirements stated in the standards below. HxWxD Weight Mat erial See drawing 9.5" To be used wit h ant enna t ilt bracket s 7456.5 Note: All dimensions are in millimeters Mechanical Specifications Dimensions. 1801 East St.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. A Pg. 2 of 2 Corporate Headquarters Powerwave Technologies. Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11.Antenna Brackets 300 205 1 44 76 72 O 1 8 O 1 4 Tilt bracket not included in kit M Ø21 ax 5 345 306 320. . Andrew Place Santa Ana. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2006. Inc. All Rights reserved. test Ka. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. 48h. Inc.00A D031-08520 Rev. Packing Size. Powerwave. Antennas are tested together with their corresponding brackets.5 kg/ 20.powerwave. Powerwave Technologies. included on antennas . Antennas shorter than 1.5” Weight: 1.00 Triple Mount Bracket is compatible with all directional Powerwave panel antennas up to 370 mm/14. The Model 7454. with or without mechanical tilt. Antennas may be used with their standard mounting hardware.5m/5 feet can use the full tilt range of the 7456.00 Antenna width: < 370 mm/14.00A antenna tilt bracket. Key Features/Benefits: • • • • • • • • D031-08417 Rev.3 lbs The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation.5” width.00A. 7456.5 kg/3. 1 of 2 Compatible with several antenna models Rugged design and construction Visually appealing Precise alignment of sector boundaries Easy to install Any length antenna Perfect for stealth installations Can be used with standard tilt brackets.Antenna Brackets Triple Mount Bracket Part Number: 7454. offering unparalleled versatility. The Triple Mount Bracket permits independent mechanical and electrical tilting of each sector. A Pg. 1801 East St. Only antennas < 1. BBR (last edition 1999) • Swedish design rules. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.0 0. BSK (last edition 99) • Handbook for snow and wind loadings.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Index No. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 Corporate Headquarters Powerwave Technologies.7m 1. 2 of 2 Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies.powerwave.8 kg/1 lbs 5 Steel See diagram.0 25. All Rights reserved. BSV (last edition 97:2) D031-08417 Rev.5 m/ 5 feet 75-1 4 mm 1 N/A Can be used with antenna tilt brackets 7456.0 35. Powerwave Technologies. . Inc. Inc.00A Tilt angle 40. Andrew Place Santa Ana.5 For poles Ø 75-114 Top view X Side view 110 83 Max width for tube dim: Ø 75 mm = X max 300 mm Ø 114 mm = X max 370 mm Ø9 12 64 71 19 Tilt angles for different antenna lengths Mechanical Specifications Dimensions.com ©Copyright 2006.Antenna Brackets 115 71 64 Ø9 19.0 30. BKR (last edition 1999) • Handbook for steel structures.0 15. HxWxD Weight Material Tilt range Pole dimension Panning range Accessory products See drawing 6.0 20.3m The design and the design calculations are based on Swedish Standards as follows: • Swedish building rules. on bracket 0. A Pg.0 10. Powerwave Technologies. Inc.0 5. 0x/7282.x0/7735.xx/7195.0x/ 7270.00 Antenna Brackets Wall and Panning Kit Part Number: 2201.0x/72320x/7233.11.0x 7216.33.0x/ 7277.xx/7194.5 meter/5 feet Weight: 0.xx/7185.xx/7183.0x Key Benefits: • Robust and reliable design • Easy to install • Easy to operate D031-08414 Rev.0x/ 7275.xx/7198.0x/ 7271.0x/7281.11 Antenna length: < 1. Below is a list outlining which antennas which can use this wall and panning kit.5 meter (5 feet) can be installed with the Powerwave wall and panning kit.0x/7217.0x/7338.11.0x/ 7276.0x/ 7278.4168.x0/7722. Family HBB Urban Xurban Metro AL antennas Part Number 7720.xx/7199.7 lbs All Powerwave antennas shorter than 1.0x/7339.x0/7721.0x/7227.0x/7263.x0A 7225.xx 7337.0x/7231.3 kg/0. A Pg 1 of 2 .0x/7228.0x/7218.0x/7255.0x 7182.xx/ 7200. 2201.0x/7226.x0A/7740.0x/ 7272.x0A/7745.xx/7221.xx/7184.0x/ 7273.0x/7230. Andrew Place Santa Ana. HxWxD Weight Mat er ial See dr awing 0.7 lbs Galvanized st eel. A Pg 2 of 2 Corporate Headquarters Powerwave Technologies. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. All Rights reserved.0 20. 48h. HxWxD 200x200x20 (mm) Shipping Weight Tilt r ange Pole dimension Panning range Accessory pr oduct s 0.0 5.0 Packing Size.com ©Copyright 2006. Powerwave. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies. ° 45 55 35 25 15 5° 55 Tilt angles for different antenna lengths 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Index No.7m 1.0 0.1 00 ° Note: All dimensions are in millimeters Mechanical Specifications Dimensions.00A All brackets fulfill the requirements stated in the standards below.3 kg/ 0. st ainless screws & nut s Tilt angle 40.7 lbs See diagram N/ A 5. Inc. 35°C. Powerwave Technologies.3 kg/ 0. 1801 East St.3m .0 10.powerwave.0 15. Inc. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 Tel: 714-466-1000 Fax: 714-466-5800 www. Antennas are tested together with their corresponding brackets. D031-08414 Rev.0 25. 5% salt.0 35. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11.55° To be used wit h ant enna t ilt br acket s 7456. Inc. test Ka.Antenna Brackets 5-5 5 A pprox.0 30. on bracket 0. 10.x0 777x.0x All antennas except . Below is a list outlining which antennas must use the 2210.11.00/7824.xx.2 lbs All Powerwave antennas with heavy duty bracket 7256.xx 748x.00 7143.xx/7144.0x/7333.00 Antenna Brackets Wall and Panning Kit Part Number: 2210.90 are shipped with pre-mounted brackets.1x 7227.0 kg/2.xx 776x.xx.0x/ 7331.4168.xx.xx 7218.x0/7329.x0/7850.10 Antenna length: ≥ 1.5 meter/5 feet Weight: 1.x0 778x.0x/7334.00/7838.xx. 2210.00 can be installed with Powerwave wall and panning kit.x0 775x.xx/7145.0x/7330.0x/7332.xx. A Pg.33. 1 of 2 .00/7834. Key Benefits: • Robust and reliable design • Easy to install • Easy to operate D031-08415 Rev.1x 7840.10 wall and panning kit.x0 7804. Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas Part Number 747x.xx. A Pg.2lbs Galvanized st eel.0 5.0 10.0 1 2 3 4 5 6 7 8 9 1011121314151617181920212223242526 Index No. CA 92705 USA Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. .0 Tilt angle 15.0 0. Powerwave.com ©Copyright 2006. HxWxD Weight Mat er ial See drawing 1. Inc. 135 1055° 50 Note: All dimensions are in millimeters Mechanical Specifications Dimensions. 1801 East St. Inc. Andrew Place Santa Ana.0 kg/ 2.2 lbs See diagram 10-55° To be used wit h ant enna t ilt bracket s 7256. All Rights reserved. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11. 5% salt. Powerwave Technologies.Antenna Brackets Approx. st ainless scr ews & nut s Tilt angles for different antenna lengths with 7256. test Ka.00 brackets 20. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 Tel: 714-466-1000 Fax: 714-466-5800 www. on bracket 1. Inc.3m 2. 35°C. HxWxD 200x200x20 (mm) Shipping Weight Tilt r ange Panning range Accessory product s 1kg/ 2. 2 of 2 Corporate Headquarters Powerwave Technologies.6m Packing Size. D031-08415 Rev.0m 2.00 All brackets fulfill the requirements stated in the standards below. 48h.powerwave. Antennas are tested together with their corresponding brackets. Powerwave Technologies. x0A/7740.5 meter/5 feet Weight: 0.11. see table below.xx/7195.9 lbs Powerwave hose clamp is to be used with Powerwave antennas shorter than 1.x0/7735.0x/7339.0x/ 7273.0x/ 7272. 1 of 2 .0x/ 7276.0x/7281.33.x0/7722.0x/ 7271.xx/7185.0x/ 7270.0x/7282.0x/7255.0x 7216.xx 7337.0x/ 7275.0x/7231.0x/7217. Family HBB Urban Xurban Metro AL antennas Part Number 7720.xx/7198.x0/7721.xx/ 7200.x0A/7745.0x/7227.0x/7226.0x/ 7277.0x/7218.x0A 7225.xx/7221.0x 7182.5 meter / 5 feet.0x/ 7278.xx/7184.0x/7230. A Pg.4168.0x/72320x/7233.xx/7194.xx/7183.0x/7228.0x/7263.00 Antenna Brackets Flush wall/pole hose clamp Part Number: 7455.0x/7338.0x Key Benefits: • Robust and reliable design • Easy to install D031-08418 Rev.xx/7199.4 kg/0.00 Antenna length: < 1. Antennas are tested together with their corresponding brackets. HxWxD Weight Mat er ial See dr awing 0. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11.5 Ø 8. Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860 ©Copyright 2006.5 70 3 Note: All dimensions are in millimeters Mechanical Specifications Dimensions.9 lbs Galvanized st eel. 2 of 2 Corporate Headquarters Powerwave Technologies. A Pg.9" N/ A To be used wit h ant enna t ilt br acket s 7456. Powerwave Technologies.4 kg/ 0.00A D031-08418 Rev. 1801 East St. CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www. Inc.57". Andrew Place Santa Ana. Inc.powerwave.com Main European Office Antennvägen 6 SE-187 80 Täby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai. Powerwave Technologies.3. st ainless screws & nut s Packing Size. 35°C. Powerwave. test Ka. 5% salt. 48h.Antenna Brackets 104 45 10.4 kg/ 0. The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies. All Rights reserved. . 70 All brackets fulfill the requirements stated in the standards below. HxWxD 200x200x20 (mm) Shipping Weight Tilt r ange Pole dimension Panning r ange Accessory pr oduct s 0. Inc.9 lbs N/ A 40-100 mm/ 1. 13 7228.00 7486.02 7273.07 7233.03 4168.02 7271.16 7228.00 7336.04 7231.x0 7735.xx 7060.00 7060.18 7230.03 7272.11 7218.x0 7752.02 7271.00 7477.x0 7760.x0 7740.4168 Product Index Antennas RET 7488.00 7804.04 7331.15 7218.10 Filters 9215.00 7331.06 7228.00 7701.00 7020.33.01 7263.33.00 7030.03 7226.04 7227.10 7471.11.x0 7766.00 7700.02 7278.03 7217.14 7218.06 7477.06 7478.x0 7765.01 LGP141nn LGP144nn LGP145nn LGP164nn LGP195nn LGP219nn 4168.02 TMA LGP104nn LGP121nn LGP132nn LGP136nn LGP138nn LGP167nn LGP185nn LGP166nn LGP192nn LGP215nn Clean Site Single System Dual System Triple System .03 7217.x0 7750.04 7282.11.x0 7762.06 7232.02 7331.02 4168.06 7336.02 7486.52 7216.06 7700.00 7478.00 7476.06 7701.14 7233.00 7488.00 7329.19 7226.x0 7745.02 7273.00 7782.04 7263.00 4168.00 7473.06 4168.13 7218.06 7481.06 7720.33.11.04 7232.02 7281.02 7277.06 7330.x0 7755.00 7070.02 7281.03 7227.03 7329.00 7472.04 7270.00R2A 7010.00 7785.16 7233.14 7228.11.00 7483.00 7486.06 7488.06 7487.10 7722.00 7330.04 7330.33.02 7478.04 7231.04 7227.33.06 7331.x0 7780.00 7487.03 7255.02 7330.18 7255.02 7487.00 7482.x0 7721.x0 7721.00 7476.04 7217.02 7476.02 7701.02 7477.03 7276.11.