PMCU_Install_Notes.pdf

63220-060-237C108/2008 Instruction Bulletin PowerLogicTM Meter Configuration Utility Installation Notes (Version 2.0) Use this instruction sheet when you install the PowerLogic Meter Configuration Utility, version 2.0. What’s in the PowerLogic Meter Configuration Utility? The PowerLogic Meter Configuration Utility (PMCU) is a device setup utility application. You will use PMCU to configure the onboard setup of PowerLogic devices over a communications network. With PMCU you can: • • • add RS485 Serial or Modbus TCP communication connections • perform phasor diagram analysis using the Fundamental Phasors Diagnostic table • perform a system communication test to verify communication connection between the computer and the devices in the system • view device, system, and communications diagnostics information using the Activity Log file • create a backup of the PMCU database, which contains communication and device configuration information add devices for onboard configuration set up and configure onboard device settings like CT/PT ratio, system type, demand calculations, I/O setup, onboard data logging, onboard waveform capture, and onboard alarming PMCU includes an optional feature called Viewing Features. See details about Viewing Features activation on page 4 of these installation instructions. With the Viewing Features, you can: • • • • • • view real-time data in quick tables view waveforms view on-board data files view PowerLogic meter configuration reports check device status perform device registry read and write commands By default, PMCU is a standalone application. It uses its own database to store device configuration information and communication information. What PowerLogic Devices Can You Set Up, Configure, and View in PMCU? The standard devices installed with PMCU are the PM500, PM700, PM800, PM9C, CM3000, and CM4000 family of meters. There is an option to install other device types as well. The optional device types, PM600 and CM2000, are found in the POWERLOGIC\PMCU\OptionalInstalls folder. That folder also contains a file called Installing Optional Device Types.txt. See that file for instructions on installing these device types. 1 SP1 Internet Access (recommended) About Microsoft Access Some internet access is recommended for downloading files and Viewing Features activation. SP1 (SP2 also supported) Windows 2000 Professional. contact your local Schneider Electric representative. When Access 2000 Runtime is installed. a version of Access 2000 is used to view PowerLogic Meter Configuration Reports. SP3 (SP4 also supported) Windows 2000 Server/2000 Advanced Server. Access 2000 Runtime is a free application. Access is used to create. If you have any questions or need additional assistance. If Microsoft Access 97 (or any version prior to Access 2000) is installed on the computer.com/downloadlist. If this is not possible. and it is included with the PMCU package (on the PMCU CD.cfm You must follow special steps to install two versions of Microsoft Access on one computer. In PMCU.exe). and saved properly. A . Access Runtime is a version of the Access application that allows database viewing. you can install the Access 2000 Runtime version on the same computer as Access 97. Read this .com downloads area. If.pdf file called "Dual Access Install" is available from the PowerLogic. NOTE: PMCU will not install on a computer that has any version of System Manager Software (SMS) or GFX software. follow the instructions in the message to go to the PowerLogic.6.powerlogic. If all of the prerequisites are not met. Following these steps ensures that the Microsoft Access database files can be opened. used.PowerLogic Meter Configuration Utility Installation Notes Before Installing 63220-060-237C1 08/2008 Ensure that the prerequisites have been met (see table below). contact your local Schneider Electric representative for assistance. PMCU will install on a computer that has ION Enterprise 5. Service Pack 1 or higher. the PMCU install detects it and stops the install. We recommend you upgrade to Access 2000 before you install PMCU.com downloads area: www. PC Monitor Resolution Operating System and Service Pack (SP) 800x600 Windows Vista Business Windows Vista Enterprise Windows Vista Ultimate Windows XP Professional. select Access > setup. you see a message about Microsoft Access 97. you can install and use PMCU. the PMCU install detects it and stops the install. modify. but does not allow database creation or database modification. Microsoft Access is an application that is included in some versions of Microsoft Office. SP3 (SP4 also supported) Windows Server 2003. PMCU Hardware/Software Requirements Feature Minimum Requirements Processor Speed 733 MHz RAM Disk Space 256 MB 600 MB free space to install PMCU An additional 200 MB is recommended for file storage. the install program will notify you and will exit the installation.pdf file for assistance on the subject. If SMS or GFX is installed on the computer. and view databases. when you begin the PMCU install. If no internet access is available. 2 © 2008 Schneider Electric All Rights Reserved . When you download it. To continue with the install. Close all Windows applications on the PMCU computer. click Next. It is recommended that you accept the default C drive. At the Windows log-in screen.exe. When the Welcome screen displays. — Accept the default (C:\POWERLOGIC\PMCU\Install). At the PowerLogic Meter Configuration Utility Extraction screen. Navigate to the PMCUInstall. click Yes. 5. open the folder named PMCUv1. Click Install. 3. The file you will download is called PMCUInstall. click No. the text prints at the default printer. The Ready to Install the Program screen displays. If you want to print a copy of the license text. which can take several minutes. Download the installation file from the PowerLogic website.exe. read the license agreement to be sure you accept its terms.exe. you will need to access it during the installation. 11. The Microsoft SQL Desktop license agreement screen displays. Log on to the local computer with a Windows Administrator account. 9. Remember where you put it.exe file that you downloaded. before you begin the PMCU install. Several progress messages display. © 2008 Schneider Electric All Rights Reserved 3 . 4. 8. Click Install. Click Next. The Select a Drive screen displays. and double-click setup. 6. To continue the installation. Before you continue. The text prints at the computer’s default printer. The System Manager Software License Agreement screen displays. 13. place PMCUInstall.63220-060-237C1 08/2008 PowerLogic Meter Configuration Utility Installation Notes Install PMCU Using a Dedicated Windows Administrator Account The person who installs the PMCU must be logged on to the computer as a Windows Administrator on the local computer. To terminate the installation. choose the location where you want to install PMCU: — Browse to the preferred location. Installation Instructions Follow these steps to install PMCU: 1. Create this Administrator account. Double-click PMCUInstall. 7. If you want to print a copy of the license text. When the Machine Reboot Required message displays. click Yes. Navigate to the location you chose. Select the drive on which both PMCU and SQL will be installed. click OK. click Print. Read and follow all of the instructions in these Installation Notes. 10. if it does not already exist. 2. 12. log in with a Windows Administrator password.exe anywhere on the PMCU computer. click Print. Enter the user ID and password that was provided to you. Activate Viewing Features: Check this box only when you are activating your software. 4 © 2008 Schneider Electric All Rights Reserved . If you still need to install it. To activate this feature. Company/Country: Type your company name. Backing Up the Database Before you uninstall PMCU. you should first back up the system database. Click Submit to send the activation request and/or feedback. After the main PMCU window displays. leave this box unchecked. E-mail Address: Type your e-mail address. click Start > Programs > POWERLOGIC > Activate Viewing & Feedback. you must have logged on to PMCU with the “master/master” login/password. thus. If you are sending feedback only. if you want to keep the older file. Activating the Viewing Features If you do not have internet access. Follow these steps to back up the PMCU system database: 1. The Viewing Features option requires separate activation. please be sure that you have installed SQL Service Pack 3. This is the address that will receive instructions for activating the Viewing Features. You will be contacted by return e-mail or by your local Schneider Electric representative with information about your activation request. The message “The backup succeeded” displays. select your country from the pull-down list. The information you enter will enable us to improve the PMCU product. 2.bak) overwrites the previous file. Each backup file (SMS_System_Data. Launching and Using PMCU To launch PMCU. click Yes. System backup files are written to the Backup folder in the main PMCU folder (default: C:\POWERLOGIC\PMCU\Backup). Enter the following information: First Name/Last Name: Type the name of the person who will receive the confirmation e-mail and activation information. Feedback: This is an optional field. click Help > PMCU Help. you will need to contact your local Schneider Electric representative for help in completing activation.PowerLogic Meter Configuration Utility Installation Notes 63220-060-237C1 08/2008 SQL Service Pack 3 Installation The SQL Desktop Engine (MSDE 2000) installation includes the components for SQL Service Pack 3. you can begin to use the PMCU features. In response to the prompt asking if you want to continue. rename or move it before running the backup procedure. click Tools > System Backup. NOTE: To set up and configure devices. The file SMS_System_Data. click Start > Programs > POWERLOGIC > Meter Configuration Utility. Type any comment or suggestion concerning PMCU and/or the Viewing Features. You will be asked to log on to the application. If you have already installed SQL. For help using PMCU. You may visit this website as often as needed to submit comments or suggestions.bak appears in the PMCU > Backup folder. see the Microsoft website for the download. A Registration and Feedback form screen displays. With PMCU running. you must log in with a Windows Administrator password. 3. At the Machine Reboot Required screen. 4. Shut down the PMCU application. At the Windows login screen. click No. Click Remove. 5. repeat steps 1 through 4. © 2008 Schneider Electric All Rights Reserved 5 .63220-060-237C1 08/2008 Restoring the Database PowerLogic Meter Configuration Utility Installation Notes To restore a backed up system database.log appears in the Bin folder. When a message displays telling you that the reinstall was successful. Click Next. locate and double-click the file RestoreDB. In the Bin folder. 7. Click Yes at the warning message. highlight PMCU. Click the Change or Remove Programs button if it is not already selected. From the list of currently installed programs. 4. The file RestoreDB. check the Uninstall PowerLogic Meter Configuration Utility radio button. A message displays telling you that the restore process succeeded. When you are ready to uninstall PMCU. Click Change. Back up the database. In response to the prompt asking if you want to continue. Reinstalling and Uninstalling PMCU NOTE: Never reinstall or uninstall MSDE. Doing so could destroy the data in your database. click Yes. From the list of currently installed programs. follow these steps: 1. you must remove both the PMCU and MSDE applications before you install SMS PE. 2. Go to Add or Remove Programs in the Control Panel. following instructions in the PMCU help file. If you need to back up the PMCU database. click OK. Several messages display while the PMCU files are being reinstalled. click OK. do the following: 1. click OK. Several messages display while the PMCU files are being uninstalled. do the following: 1. 6. click OK. To reinstall the PMCU and its components. you must log in with a Windows Administrator password. Shut down the PMCU application. Click Next. At the Machine Reboot Required screen. When the Setup Type screen displays. Go to Add or Remove Programs in the Control Panel. 2. Click the Change or Remove Programs button if it is not already selected. To uninstall PMCU and its components. highlight PMCU. When the Setup Type screen displays. 5. 3. NOTE: A message displays. check the Reinstall PowerLogic Meter Configuration Utility radio button. 3. If you install SMS PE on a computer that has PMCU installed.exe (default location: C:\POWERLOGIC\PMCU\Bin). telling you all PMCU files will be removed from the computer. At the message that says the PMCU uninstall was successful. Close the PMCU application. At the Windows login screen. 2. SquareD. and maintained only by qualified personnel.PowerLogic Meter Configuration Utility Installation Notes Instruction Bulletin Square D / Schneider Electric 295 Tech Park Dr. © 2008 Schneider Electric All Rights Reserved . No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. TN 37086 USA 1-888-SquareD (1-888-778-2733) www. Suite 100 Lavergne.com 63220-060-237C1 08/2008 Electrical equipment should be installed. serviced. operated.