Pioneer VSX-D711 Receiver User Guide

AUDIO/VIDEO MULTI-CHANNELRECEIVER VSX-D711 VSX-D811S Operating Instructions XRB3013A.01.06 1 01.12.12, 4:40 PM Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. IMPORTANT NOTICE H006AEn The serial number for this equipment is located in the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security. XRB3013A.01.06 2 01.12.12, 4:40 PM Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic II” and the double D symbol 2 are trademarks of Dolby Laboratorories. XRB3013A.01.06 3 "DTS", “ES”, and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. 01.12.12, 4:41 PM ............ 35 Using Loudness and Midnight listening ... 25 Operating other Pioneer components ................................... 27 Remote control ................ 32 Stereo/Direct ................ 38 Speaker setting . 24 AC outlet ......................1 channel setting (VSX-D811S only) ................................................................... 36 Playing other sources ........................ 40 Subwoofer setting .... 13 Digital audio coaxial cords/ Optical cables ........................... 43 Coaxial digital input settings ..............6 Making cable connections .....19 To improve FM reception .................................................................6 Loading the batteries ..6 Operating range of remote control unit .............................. 39 Surround back speaker setting (VSX-D811S only) ............................................................................19 AM loop antenna ... 34 Listening to multi-channel playback ...............................................................1 channel components ......................40 LFE attenuator setting .....42 Dual mono setting .................19 To improve AM reception ................ 40 6......................... 19 Antenna snap connectors ........... 40 Crossover frequency setting ... 22 Connecting additional amplifiers (VSX-D811S only) ......... 32 Advanced Surround modes ...........19 Connecting the speakers (VSX-D711) ... 41 Surround speaker distance setting ............. 19 Using external antennas ......06 4 4 Controls and displays Front panel .................12 3 Connecting up Audio/Video cords ........34 Using Stereo/Direct ............ 20 Connecting the speakers (VSX-D811S) ...............................................................................................................41 Front speaker distance setting ..........................................................8 Using the Quick Setup ... 36 Selecting the multi-channel analog inputs ...7 Listening to Surround Sound .........................12..................................................................................................13 Connecting digital components .................... 22 Speaker terminals .................................................................................. 17 Connecting video components ............................................ 6 2 5 minute guide Introduction to home theater ........................................................01...16 Connecting DVD 5................................................................................ 22 Hints on speaker placement .................................41 Center speaker distance setting ...... 18 Connecting antennas .................. 25 XRB3013A...................................................................................... 42 Component video input settings ..........................................12...................................... 13 S-video cables ......... 14 Connecting audio components ....13 Component video cords ...................................35 Using Advanced Surround ................................6 Installing the receiver .......................................................36 Using the tone controls ............... 4:41 PM ..............................18 Connecting to the front panel video terminal ..................................... 42 Surround back channel input setting (VSX-D811S only) . 42 Dynamic range control setting ..............26 Display .......... 19 FM wire antenna ...................................Contents 1 Before you start Checking what’s in the box ..... 43 Optical digital input settings ......... 41 Surround back speaker distance setting (VSX-D811S only) ...............................33 Choosing the input signal ............32 Standard mode .................... 29 5 Playing sources Introduction to Sound Modes .. 37 6 Setting up your receiver Choosing your receiver setup ........ 21 A and B speaker systems .................. 43 01................................ ............ 45 Tuning directly to a station ...... 51 Direct function .................................... 68 Specifications ............................ 52 Confirming preset codes .....................Setting the relative volume level of each channel ................................ 54 Preset Code List ........................ 49 Searching for preset codes .................................................................... 47 8 Making a recording Making an audio or a video recording .................................................. 48 9 Controlling the rest of your system Setting the remote to control other components ............ 51 Clearing all the remote control settings .....46 Naming station presets .........06 5 01. 53 Controls for other components ................................................. 4:41 PM ..................... 50 Erasing one of the remote control button settings (VSX-D811S only) ............. 50 Programming signals from other remote controls (VSX-D811S only) ............56 10 Additional information Troubleshooting ......................... 45 Saving station presets ..... 44 7 Using the tuner Listening to the radio .... 45 Improving FM stereo sound ............................................................ 49 Selecting preset codes directly .......................................12.....................................70 XRB3013A.....12............................ 48 Monitoring your recording ........................01.......................... 47 Listening to station presets ...................................................52 Controls for TVs ... This prevents proper heat dispersal.12. • Dry cell batteries x 2 (AA size IEC R6P) • These operating instructions • Insert the plus and minus sides of the batteries properly according to the marks in the battery case. 4:41 PM .) of space above the receiver. • Remote control Please note the following points: • Do not place objects directly on top of this unit. Operating range of remote control unit The remote control may not work properly if: • There are obstacles between the remote control and the receiver's remote sensor. be sure to leave more than 8 inches (20 cm. shelf. Loading the batteries 30 30 23ft (7m) 6 Dry cell batteries x 2 (AA size IEC R6P) En XRB3013A. • The receiver is located near a device that is emitting infrared rays. Do not use different batteries together.06 6 01. etc.01. • When installing on a rack. Observe the following precautions: • Never use new and old batteries together. Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration).. • The receiver is operated simultaneously with another infrared remote control unit.12. • When disposing of used batteries. If this happens. the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Installing the receiver • Batteries with the same shape may have different voltages.01 Before you start Checking what’s in the box Please check that you've received the following supplied accessories: • AM loop antenna • FM wire antenna Incorrect use of batteries may result in such hazards as leakage and bursting. • Direct sunlight or fluorescent light is shining onto the remote sensor. please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. 5 minute guide 02 Introduction to home theater You are probably used to using stereo equipment to listen to music. 7 En XRB3013A. but may not be used to home theater systems that give you many more options (such as surround sound) when listening to soundtracks. according to your speaker setup. but other possibilities (like listening to a CD with multi-channel surround sound) are explained in Playing sources. DVD-Video has become the basic source material for home theater due to its size. This receiver will automatically decode Dolby Digital.12. making you feel like you're in the middle of the action or concert.07. and ease of use. but also on the source and the sound settings of the receiver. In most cases. starting on page 32.12 7 01. Depending on the DVD. you can have up to seven different audio tracks coming from one disc. This is what creates a surround sound effect and gives you the feeling of ‘being there’. quality. 4:41 PM . The surround sound you get from a home theater system depends not only on the speakers you have set up in your room.12. DTS. you won’t have to make changes for realistic surround sound. Home theater refers to the use of multiple audio tracks to create a surround sound effect. all of them being sent to different speakers in your system. or Dolby Surround DVD-Video discs. 01. In most cases. Video cord DIGITAL IN ASSIGNABLE COAX OPT (DVD/LD) ¥ DIGITAL OUT DVD / LD FRONT VIDEO OUT S IN DIGITAL IN AUX IN D VIN D ANTENNA 5.12. Optical cable Coaxial cable Note: If you hook up using a optical cable. En 8 R PREOUT CENTER 8 XRB3013A. For surround sound. 4:41 PM B .12. Use a video cord to connect your receiver to the TV using the jacks as shown below.12 PR OUT PREOUT TV ( D V D / LD) IN ¥ MONITOR OUT L IN DVD 5. 1 Hook up your DVD player.07.1CH REC INPUT CD-R AM IN / TAPE LOOP FM IN / MD UNBAL 75 Ω ¡¢ 7 8 (T V / S A T ) ¥ OPT This receiver* OPT R SURROUND (CD) ø DIGITAL OUT Y OUT IN Î 3 VCR / DVR MONITOR OUT SUB WOOFER IN TV/ IN SAT IN DVD / IN LD PREOUT CONTROL IN PLAY AUDIO ASSIGNABLE L DVD player OUT PB VIDEO S P E A A K E R S R FRONT PR VIDEO IN Video cord Y PB (T V / SAT) IN ø CENTER L R SURROUND L MONITOR OUT FRONT L SUB WOOFER * The illustration shows the VSXD711.1CH INPUT CENTER SUB W.VIDEO VIDEO TV / SAT DVD / LD FRONT IN 0 (DVD/ LD) ¥ CD VCR / DVR IN STANDBY/ON COAX ASSIGNABLE DVD 5. you should have your system hooked up for surround sound in no time at all. If you hook up using an optical cable. so with the following quick setup guide. you can simply leave the receiver in the default settings.02 5 minute guide Listening to Surround Sound This receiver was designed with the easiest possible setup in mind. but DVD connections for the VSX-D811S are the same. see Optical input setting on page 43 to assign the optical input to DVD. 2 Hook up your TV. Use a video cord to connect the video output on your DVD to the receiver using the jacks shown below. or an optical connection (you don’t need to do both). you should refer to Optical digital input setting on page 43 to assign the optical input to DVD. you’ll want to hook up using a digital connection from the DVD player to the receiver. You can do this with either a coaxial.1CH REC INPUT IN CD-R / TAPE / MD R COMPONENT VIDEO ( T V / SAT) ¥ MONITOR OUT OUT DVD PLAYER 41 S . DIGITAL IN COAX OPT OPT ASSIGNABLE ANTENNA IN AUX IN CD DVD 5.12. and a complete setup is best.12.1CH REC INPUT IN CD-R / TAPE / MD TV/ IN SAT SUB WOOFER DVD / IN LD PREOUT CONTROL IN OUT PLAY R AUDIO ( D V D / LD) IN ¥ L Y FM UNBAL IN 75 ‰ ASSIGNABLE MONITOR OUT MONITOR OUT L S P E A A K E R S R FRONT L Y PB (T V / SAT) IN ø CENTER PR R SURROUND L R FRONT L AC OUTLET PREOUT CENTER B VSX-D711 TV Be sure to complete all connections before connecting this unit to the AC power source.5 minute guide 02 3 Connect your speakers. Simply connect the speakers you have in the manner shown below. 4:41 PM . and eight (also including the subwoofer) for the VSX-D811S). • If you’re not using a subwoofer. but everyone’s home setup will vary. In this case the center speaker shown is unnecessary. INPUT Powered subwoofer 9 En XRB3013A. (DVD/ LD) ¥ S . A complete setup of speakers is shown here (six speakers (including the subwoofer) for the VSXD711.12 9 01.VIDEO VCR / DVR AM LOOP R SURROUND (CD) ø COMPONENT VIDEO ( T V / SAT) ¥ DIGITAL OUT PB PR OUT VIDEO TV / SAT IN DVD / LD FRONT IN VCR / DVR IN OUT IN IN MONITOR OUT DVD 5. Front Speakers L R Surround Speakers SL SR Center Speaker C Use speakers with a nominal impedance of 8 Ω to 16 Ω. The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended. • Use speakers with a nominal impedance of 8 Ω to 16 Ω. Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers. change the front speaker setting (see Speaker setting on page 39) to large • When using the speaker on your TV as the center speaker (C). connect the CENTER PREOUT jack on this unit to the audio input jack on your TV.07.1CH INPUT CENTER SUB W. Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal. 12 10 01.12.1CH REC INPUT IN CD-R / TAPE / MD SUB WOOFER (CD) ø COMPONENT VIDEO (TV / SAT) MONITOR OUT TV/ IN SAT DVD / IN LD CONTROL R AUDIO OUT L VSX-D811S (CD-R/ / TAPE / MD) ø DIGITAL OUT S P E A A K E R S R FRONT PREOUT ASSIGNABLE ( D V D / LD) IN ¥ L L MONITOR OUT Y OUT VCR / DVR IN PREOUT PLAY IN ¥ PB L PR CENTER Y PB (T V / SAT) IN ø PR R SURROUND BACK L R FRONT SURROUND BACK R SURROUND CENTER R SURROUND L R FRONT L AC OUTLET B Subwoofer (passive) INPUT TV Be sure to complete all connections before connecting this unit to the AC power source.12.07. VSX-D811S R SURROUND BACK L 10 En XRB3013A. (DVD/ LD) ¥ S . connect the positive wire to the right channel (+) terminal.02 5 minute guide Front Speakers L R Surround Speakers SL SR Center Speaker C DIGITAL IN COAX OPT Surround back speakers SBL SBR OPT ASSIGNABLE ANTENNA IN AUX IN CD DVD 7. and the negative wire to the left channel (–) terminal. and the negative wire to the left channel (–) terminal (shown at right).1CH INPUT CENTER SUB W. Powered subwoofer VSX-D811S only Surround back speaker (or subwoofer) • If you are using only one surround back speaker. connecting the positive wire to the right channel (+) terminal.VIDEO SURROUND R L VCR / DVR AM LOOP SURROUND L BACK R FM UNBAL IN 75 Ω TV / SAT IN DVD / LD FRONT IN IN VIDEO OUT IN MONITOR OUT DVD 5. • If you select subwoofer (SB SUBWF) in the Surround back speaker setting (see page 40) you can hook up a subwoofer instead of speakers to the surround back speaker terminals. Connect the wires just as above (and as shown at right). 4:41 PM . See Using the Quick Setup on the next page if you’re unsure about the settings. 5 Press QUICK SETUP on the front panel to specify your speaker setup and your room size. Also make sure that DVD/LD is showing in the receiver’s display.12 11 01. and adjust the volume to your liking. 6 Play a DVD. the listening mode must be set to Standard (it should already be set—see page 34 if you need to do this) if you want multi-channel surround sound. Make sure you’ve set the video input on your TV to this receiver.12. Check the manual that came with the TV if you don’t know how to do this.12. indicating that the DVD input is selected.07. you may only get digital 2 channel stereo and analog sound. your subwoofer and the TV.5 minute guide 02 4 Plug in the receiver and switch it on. followed by your DVD player. 4:41 PM . Use the MULTI JOG/INPUT SELECTOR dial to select and ENTER to confirm your selection. press DVD/LD on the remote control to set the receiver to the DVD input. See also Choosing your receiver setup on page 38–43 for more setup options. There are several other sound options you can select. If it isn’t. See pages 32–33 for more on this. 11 En XRB3013A. In this case. Depending on your DVD player or source discs. 10 ft. or Large (see table below). Front Center Surround Surround Sub Speakers Speaker Speakers Back Sp. 9 ft. 2 Press QUICK SETUP. 5 ft. Front M L 12 ft. 12 ft. The receiver automatically makes the necessary settings after you have selected your speaker setup and room size.1 ch 4.0 ch* R R 7.07. Medium.12. choose between Small.1 ch 5.1 ch MASTER VOLUME ADVANCED SURROUND STEREO/ DIRECT SIGNAL SELECT MIDNIGHT/ LOUDNESS SPEAKERS MONITOR TONE 6.0ch 7. 7 ft.1 ch* √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ (1 speaker) (1 speaker) √ (2 speakers) (2 speakers) √ * VSX-D811S only 1 If the receiver is off.1ch 4.1ch* 6.12 12 01. Cycle between the following choices: 3. 3 Use the MULTI JOG/INPUT SELECTOR dial to choose your speaker setup. * VSX-D811S only 6.. Surround 6 ft.12.0 ch* QUICK SETUP UP DOWN 6. 5 Use the the MULTI JOG/INPUT SELECTOR dial to choose your room size.02 5 minute guide Using the Quick Setup You can use the Quick Setup to get your system up and running with just a few button presses.0ch* * VSX-D811S only 5. 4.0ch* 5. Use the front panel controls for the steps below.1ch 6 Press ENTER to confirm your setup.0 ch INPUT SELECTOR MULTI JOG ENTER 5. If you want to make more specific settings.0 ch AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m-Û≥.1 ch* MULTI JOG LISTENING MODE VIDEO INPUT FL DIMMER DIGITAL IN S-VIDEO VIDEO L AUDIO 7. Check the table below to find the speaker setup that corresponds with your system.1ch* 4. The display prompts you to select your speaker setup. Center 10 ft. 10 ft. refer to Choosing your receiver setup on pages 38–43. 7 ft. press STANDBY/ ON to turn the power on. Surround Back* 3 ft. The display shows the speaker setup and room size that you have selected. 12 En XRB3013A.0ch 4 Press ENTER.1ch 7.0ch 3. The display prompts you to select your room size.0 ch 3. The STANDBY indicator goes out. S 12 ft. Depending on the distance of your speakers from the listening position. 4:41 PM . Woofer 3. and the yellow plugs to VIDEO. white plugs to L (left).25 13 01.12. Be sure to insert completely. 4:42 PM .Connecting up 03 Before making or changing any connections. interference between the signals is avoided. The color signal of the TV is divided into the luminance (Y) signal and the color (PB and PR) signals and then output. Connect from an S-video jack on the rear of the receiver to an S-video jack on the video component you are hooking up. Audio/Video cords Component video cords Use audio/video cords (not supplied) to connect the audio/video components and a video cord to connect the monitor TV. Use component video cords to get the best possible color reproduction of your video source. Be sure to insert completely. R L VID EO Y PB Green S-video cables Use S-video cables (not supplied) to get clearer picture reproduction than regular video cords.13. switch off the power and disconnect the power cord from the AC outlet. SV IDE O PR Blue Red Digital audio coaxial cords/ Optical cables Commercially available digital audio coaxial cords (standard video cords can also be used) or optical cables (not supplied) are used to connect digital components to this receiver. Be sure to insert completely. In this way.12. Connect red plugs to R (right). Digital audio coaxial cord (or standard video cord) Optical cable 13 En XRB3013A. Connect from the component video jacks on the rear of the receiver to the component video jacks on the video component you are hooking up. See page 18 to connect the front panel optical input on the VSX-D811S. DAT and CD-R) you can make direct digital recordings with this unit.1CH REC INPUT IN CD-R / TAPE / MD MONITOR OUT SUB WOOFER IN TV/ IN SAT DVD / IN LD PREOUT CONTROL IN PLAY R AUDIO OUT L S P E A A K E R S R FRONT L Y PB (T V / SAT) IN ø CENTER PR R SURROUND L R DIGITAL OUTL Satellite tuner FRONT AC OUTLET PREOUT CENTER B DIGITAL OUT COAX CD player DIGITAL OUT COAX DVD player 14 En XRB3013A. the coaxial output from the component to coaxial input on the receiver).1CH INPUT CENTER SUB W.12. 4:42 PM .12. If you connect this to the optical input on a digital recorder (currently these include MD. There is one digital output jack which is marked DIGITAL OUT. You can do this by either coaxial or optical connections (you do not need to do both). The quality of these two types of connections is the same but since some digital components only have one type of digital terminal. The VSX-D711 has three digital inputs on the rear panel (two coaxial inputs and a optical input) and the VSX-D811S has four (two coaxial inputs and two optical inputs). it is a matter of matching like with like (for example. Connect your digital components to the rear panel as shown below. AUX IN (DVD/ LD) ¥ CD IN AM LOOP (CD) S . The arrows indicate the direction of the audio signal. When connecting your equipment. VSX-D711 DIGITAL IN COAX OPT DIGITAL IN OPT CD recorder ASSIGNABLE ANTENNA DVD 5.13.25 14 01.03 Connecting up Connecting digital components The easiest way to hook up this receiver for surround sound is to use a digital input.VIDEO VCR / DVR R SURROUND ø COMPONENT VIDEO ( T V / SAT) ¥ DIGITAL OUT MONITOR OUT MONITOR OUT L Y FM UNBAL IN 75 ‰ ASSIGNABLE PB PR OUT VIDEO TV / SAT IN DVD / LD FRONT IN VCR / DVR IN OUT IN DVD 5. always make sure the power is turned off and the power cord is disconnected from the AC outlet. (DVD/ LD) ¥ S . We also recommend hooking up your digital components to analog audio jacks as well.25 15 01.Connecting up 03 Satellite tuner DIGITAL OUT DIGITAL CD recorder DIGITAL IN OUT VSX-D811S DIGITAL IN COAX OPT OPT ASSIGNABLE ANTENNA IN AUX IN CD DVD 7. See the component's instruction manual if you are unsure about its input and output jacks.12.VIDEO SURROUND R L VCR / DVR AM LOOP SURROUND L BACK R FM UNBAL IN 75 Ω TV / SAT IN DVD / LD FRONT IN IN VIDEO OUT IN DVD 5.1CH REC INPUT IN CD-R / TAPE / MD MONITOR OUT SUB WOOFER (CD) ø COMPONENT VIDEO (TV / SAT) R AUDIO L (CD-R/ / TAPE / MD) ø DIGITAL OUT TV/ IN SAT DVD / IN LD PREOUT OUT S P E A A K E R S R FRONT ASSIGNABLE PREOUT IN ¥ ( D V D / LD) IN L L MONITOR OUT Y OUT VCR / DVR IN CONTROL PLAY IN ¥ MONITOR OUT PB L PR CENTER Y P BB (T V / SAT) IN ø P RR R SURROUND BACK L R FRONT FRONT R SURROUND SURROUND SURROUND SURROUND BACK BACK CD player CENTER DIGITAL OUT CENTER R SURROUND L COAX R FRONT L AC OUTLET B DIGITAL OUT COAX DVD player If you have an LD player. hook up your DVD or LD player directly to an RF demodulator using both the 2 RF output and either a coaxial or optical digital connection. you need to make special connections to ensure you can play 2 RF format LDs on your system.13. 15 En XRB3013A. If this is the case. Make sure the RF demodulator digital in switch is set correctly (optical or coaxial depending on the connection).1CH INPUT CENTER SUB W. 4:42 PM .12. You must also hook up your digital components to analog audio jacks if you want to record to/from digital components (like an MD) to/from analog components. connect your analog audio components (such as a cassette deck) to the jacks.12. When connecting your equipment. OUTPUT DIGIT L R CD player ASSI ANTENNA IN AUX IN CD VCR / DVR AM LOOP FM UNBAL IN 75 ‰ TV / SAT IN DVD / LD FRONT IN SURROUND L IN OUT IN DVD 5. 4:42 PM .12.1CH REC INPUT IN CD-R / TAPE / MD R IN CD-R/Tape/MD Deck R VIDEO REC PLAY L DVD 5. The arrows indicate the direction of the audio signal.13.03 Connecting up Connecting audio components To begin set up. but for components that only play. you need to hook up four plugs to the receiver (a set of stereo inputs and a set of stereo outputs). you only need to hook up one set of stereo plugs. MONI OUT SUB WOOF PREOU PLAY R AUDIO L 16 En XRB3013A. For components you want to record with.1CH INPUT CENTER SUB W. See page 14 for more on digital connections.25 16 01. always make sure the power is turned off and the power cord is disconnected from the AC outlet. • If the component you are connecting (to the VSX-D811S) only has one surround back channel output.1CH REC INPUT IN CD-R / TAPE / MD TV/ IN SAT SUB WOOFER DVD / IN LD PREOUT CONTROL IN OUT PLAY R AUDIO ( D V D / LD) IN ¥ L Y FM UNBAL IN 75 ‰ ASSIGNABLE MONITOR OUT MONITOR OUT L DIGITAL IN COAX R FRONT PB (T V / SAT) IN ø CENTER L PR SUB WOOFER OUTPUT R SURROUND L SURROUND OUTPUT R FRONT R L VIDEO OUTPUT AC OUTLET R B PREOUT CENTER OPT FRONT OUTPUT CENTER OUTPUT L L OPT ASSIGNABLE ANTENNA DVD 7.1 CH (or DVD 7.VIDEO SURROUND R L VCR / DVR AM LOOP SURROUND L BACK R FM UNBAL IN 75 Ω TV / SAT IN DVD / LD FRONT IN IN VIDEO OUT IN DVD 5. The arrows indicate the direction of the signal. (DVD/ LD) ¥ S . When connecting your equipment.1 CH) is selected (see page 37). change the Surround back channel input setting (page 43) to SB 1ch IN. always make sure the power is turned off and the power cord is disconnected from the AC outlet.1 channel analog output jacks VSX-D711 DIGITAL IN COAX OPT OPT ASSIGNABLE ANTENNA IN AUX IN CD DVD 5.25 17 01.1CH INPUT CENTER SUB W.1CH REC INPUT IN CD-R / TAPE / MD MONITOR OUT SUB WOOFER (CD) ø COMPONENT VIDEO (TV / SAT) MONITOR OUT PLAY R AUDIO L (CD-R/ / TAPE / MD) ø DIGITAL OUT TV/ IN SAT DVD / IN LD PREOUT OUT S P E A A K E R S R FRONT PREOUT ASSIGNABLE ( D V D / LD) IN ¥ L SURROUND BACK L MONITOR OUT Y OUT VCR / DVR IN CONTROL IN ¥ PB L PR CENTER Y PB (T V / SAT) IN ø PR R SURROUND BACK L R R SURROUND CENTER SURROUND FRONT OUTPUT OUTPUT SURROUND FRONT FRONT R L R L L R R L SURROUND BACK OUTPUT L SUB WOOFER OUTPUT CENTER OUTPUT VIDEO OUTPUT AC OUTLET B R VSX-D811S DVD/multi-channel decoder with 7.Connecting up 03 Connecting DVD 5.12.13.12.1 channel components If you prefer to use a seperate component for decoding DVDs.1CH INPUT CENTER SUB W. 17 En XRB3013A. 4:42 PM . DVD/multi-channel decoder with 5. you can connect a decoder or a DVD player with multi-channel analog outputs to the multi-channel inputs of this receiver.1 channel analog output jacks • The multi-channel input can only be used when DVD 5. AUX IN (DVD/ LD) ¥ CD IN S .VIDEO VCR / DVR AM LOOP R SURROUND (CD) ø COMPONENT VIDEO ( T V / SAT) ¥ DIGITAL OUT PB PR Y OUT VIDEO TV / SAT IN DVD / LD FRONT IN VCR / DVR IN OUT IN S P E A A K E R S IN MONITOR OUT DVD 5. ) VIDEO INPUT DIGITAL OUT V L R 18 En XRB3013A.13.03 Connecting up Connecting video components Connect your video components to the jacks as shown below. Video deck INPUT OUTPUT DIGITAL IN VIDEO COAX OPT OUTPUT VIDEO VIDEO L L OPT ASSIGNABLE L ANTENNA DVD 5. AUX IN (DVD/ LD) ¥ CD IN S . It is also a good idea to hook up your digital components with analog audio connections (see page 16). The arrows indicate the direction of the signal. There are standard audio/video jacks as well as an S-video jack (the VSX-D811S also has an optical input jack). When connecting your equipment. Hook them up the same way you made the rear panel connections. Make sure they are connected to the video component using the same kind of connection.VIDEO R TV tuner (or Satellite tuner) VCR / DVR AM LOOP R SURROUND ø ( T V / SAT) ¥ DIGITAL OUT ASSIGNABLE R R L PB PR Y OUT VIDEO TV / SAT IN DVD / LD FRONT IN VCR / DVR IN OUT IN IN MONITOR OUT DVD 5. you can hook up using the component video jacks or the S-video jacks (quality descends in this order) on the rear of the receiver instead of the regular video jacks. 4:42 PM . For better quality video.1CH INPUT CENTER SUB W.1CH REC INPUT IN CD-R / TAPE / MD OUTPUT TV/ IN SAT SUB WOOFER DVD / IN LD PREOUT CONTROL IN OUT PLAY R AUDIO ( D V D / LD) IN ¥ MONITOR OUT MONITOR OUT Y FM UNBAL IN 75 ‰ VIDEO (CD) COMPONENT VIDEO L R S P E A A K E R S FRONT L PB (T V / SAT) IN ø CENTER PR R SURROUND L INPUT R FRON PREOUT CENTER VIDEO L DVD or LD player R TV (monitor) Connecting to the front panel video terminal Front video connections are accessed via the front panel input selector as VIDEO. With digital video components (like a DVD player).12. you must use the connections shown on this page for the video signal. always make sure the power is turned off and the power cord is disconnected from the AC outlet. REO/ ECT SIGNAL SELECT MIDNIGHT/ LOUDNESS SPEAKERS MONITOR TONE QUICK SETUP MULTI JOG VIDEO INPUT DIGITAL IN S-VIDEO VIDEO L AUDIO R Video camera (etc. but in order to hear a digital source (like a DVD) you should hook up the audio to a digital input (see page 14).12.25 18 01. then snap the connector shut. To improve reception and sound quality.13. Attach to a wall. For the best possible reception. FM ANTENNA To improve AM reception Connect a 15-18 feet length of vinyl-coated wire to the AM antenna terminal without disconnecting the supplied AM loop antenna. (10mm) Using external antennas AM LOOP ANTENNA To improve FM reception Connect an external FM antenna.12. Twist the exposed wire strands together and insert into the hole. Always make sure that the receiver is switched off and unplugged from the wall outlet before making or changing any connections. FM UNBAL 75Ω FM WIRE ANTENNA 75 Ω coaxial cable FM wire antenna Connect the FM wire antenna and fully extend vertically along a window frame or other suitable area. etc. 4:42 PM . suspend horizontally outdoors. 3/8 in. etc. connect external antennas (see Using external antennas below). Outdoor antenna Indoor antenna (Vinylcoated wire) 15-18 ft. (if desired) and face in the direction that gives the best reception. (5–6m) AM LOOP ANTENNA 19 En XRB3013A.12.25 19 01.Connecting up 03 Connecting antennas Antenna snap connectors Connect the AM loop antenna and the FM wire antenna as shown below. AM loop antenna Assemble the antenna and connect to the receiver. 1CH INPUT CENTER SUB W. 4:42 PM .12.12. If you’re not using a subwoofer. The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended. connect the CENTER PREOUT jack on this unit to the audio input jack on your TV. INPUT Powered subwoofer When using the speaker on your TV as the center speaker (C).1CH REC INPUT IN CD-R / TAPE / MD TV/ IN SAT SUB WOOFER DVD / IN LD PREOUT CONTROL IN OUT PLAY R AUDIO ( D V D / LD) IN ¥ L Y FM UNBAL IN 75 ‰ ASSIGNABLE MONITOR OUT MONITOR OUT L S P E A A K E R S R FRONT L Y PB (T V / SAT) IN ø CENTER PR R SURROUND L R FRONT L AC OUTLET PREOUT CENTER B VSX-D711 TV Be sure to complete all connections before connecting this unit to the AC power source. Front Speakers L R Surround Speakers SL SR Center Speaker C Use speakers with a nominal impedance of 8 Ω to 16 Ω. but everyone’s home setup will vary. Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal.03 Connecting up Connecting the speakers (VSX-D711) A complete setup of six speakers (including the subwoofer) is shown below. In this case the center speaker shown is unnecessary. (DVD/ LD) ¥ S . Simply connect the speakers you have in the manner shown below. and a complete setup is best.13. Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers. 20 En XRB3013A. DIGITAL IN COAX OPT OPT ASSIGNABLE ANTENNA IN AUX IN CD DVD 5. change the front speaker setting (see Speaker setting on page 39) to large.VIDEO VCR / DVR AM LOOP R SURROUND (CD) ø COMPONENT VIDEO ( T V / SAT) ¥ DIGITAL OUT PB PR OUT VIDEO TV / SAT IN DVD / LD FRONT IN VCR / DVR IN OUT IN IN MONITOR OUT DVD 5.25 20 01. 12.13.1CH INPUT CENTER SUB W. but everyone’s home setup will vary. Front Speakers L R Surround Speakers SL SR Center Speaker C DIGITAL IN COAX OPT Surround Back Speakers SBL SBR OPT ASSIGNABLE ANTENNA IN AUX IN CD DVD 7. Use speakers with a nominal impedance of 8 Ω to 16 Ω. change the front speaker setting (see Speaker setting on page 39) to large. The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended.12. If you’re not using a subwoofer.VIDEO SURROUND R L VCR / DVR AM LOOP SURROUND L BACK R FM UNBAL IN 75 Ω TV / SAT IN DVD / LD FRONT IN IN VIDEO OUT IN MONITOR OUT DVD 5. Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal. Powered subwoofer 21 En XRB3013A. (DVD/ LD) ¥ S .Connecting up 03 Connecting the speakers (VSX-D811S) A complete setup of eight speakers (including the subwoofer) is shown below. 4:42 PM . Simply connect the speakers you have in the manner shown below.1CH REC INPUT IN CD-R / TAPE / MD SUB WOOFER (CD) ø COMPONENT VIDEO (TV / SAT) MONITOR OUT TV/ IN SAT DVD / IN LD CONTROL R AUDIO OUT L VSX-D811S (CD-R/ / TAPE / MD) ø DIGITAL OUT S P E A A K E R S R FRONT PREOUT ASSIGNABLE ( D V D / LD) IN ¥ L SURROUND BACK L MONITOR OUT Y OUT VCR / DVR IN PREOUT PLAY IN ¥ PB L PR CENTER Y PB (T V / SAT) IN ø PR R SURROUND BACK L R FRONT R SURROUND CENTER R SURROUND L R FRONT L AC OUTLET B Subwoofer (passive) TV INPUT Be sure to complete all connections before connecting this unit to the AC power source. and a complete setup is best for surround sound. Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers.25 21 01. • If you are using only one surround back speaker. En XRB3013A. and the negative wire to the left channel (–) terminal (see illustration on page 11). Use good quality speaker wire to connect the speakers to the receiver. Hints on speaker placement Speakers are usually designed with a particular placement in mind. but you should also follow the guidelines on placement that the speaker manufacturer provided with your particular speakers to get the most out of them. connect the positive wire to the right channel (+) terminal. Some should be placed near a wall.12. In this case the center speaker shown is unnecessary. we recommend using magnetically shielded speakers to prevent possible interference.) Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. only the front speakers and the subwoofer will be audible. A and B speaker systems The receiver has two speaker systems: A and B. such as discoloration of the picture when the TV is switched on. 22 • When placing speakers near the TV.25 22 01. No sound will come from the center. while others should be placed on stands to sound their best.03 Connecting up • When using the speaker on your TV as the center speaker (C). If any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure. (Refer to speaker manual for details. if you choose just the B system you‘ll only hear the front speakers connected to the B system and multi channel sources will be down-mixed to these two speakers. Similarly. • If you select subwoofer (SB SUBWF) in the Surround back speaker setting (see page 39) you can hook up a subwoofer instead of speakers to the surround back speaker terminals. If you do not have magnetically shielded speakers and notice discoloration of the TV picture. • Place the front left and right speakers at equal distances from the TV. We have provided a few tips on getting the best sound from your speakers (below). 2 Loosen speaker terminal and insert exposed wire.12. A is the main system supporting the full speaker setup. connect the CENTER PREOUT jack on this unit to the audio input jack on your TV. The speaker terminals also accept single banana plugs. move the speakers farther away from the TV.13. 3 Tighten terminal. Speaker terminals 3/8 in. and the negative wire to the left channel (–) terminal (see illustration on page 11). Some are designed to be floorstanding. or surround back speakers. Connect the positive wire to the right channel (+) terminal. surround. (10mm) 1 Twist exposed wire strands together. 4:43 PM . others should be placed away from walls. If you switch on both A and B speaker systems. but multi-channel sources will be down-mixed to the active speakers so no sound will be lost. Connecting up 03 • Place the center speaker above or below the TV so that the sound of the center channel is localized at the TV screen. If you choose to install the center speaker on top of the TV, be sure to secure it with putty, or by other suitable means, to reduce the risk of damage or injury resulting from the speaker falling from the TV in the event of external shocks such as earthquakes. • If possible, place the surround speakers slightly above ear level. 3-D view of speaker set up (VSX-D711) Overhead view of speaker set up (VSX-D811S) Front Left Front Right Center • Try not to place the surround speakers further away from the listening position than the front and center speakers. Doing so can weaken the surround sound effect. • To achieve the best possible surround sound, install your speakers as shown below. Be sure all speakers are installed securely to prevent accidents and improve sound quality. Overhead view of speaker set up (VSX-D711) Front Left Center Subwoofer Surround Left Surround Right Listening Position Surround Back Left Surround Back Right Front Right 3-D view of speaker set up (VSX-D811S) Subwoofer Surround Left Surround Right Listening Position 23 En XRB3013A.13.25 23 01.12.12, 4:43 PM 03 Connecting up Connecting additional amplifiers (VSX-D811S only) This receiver has more than sufficient power for any home use, however it is possible to add additional amplifiers to every channel. Make the connections shown below to add amplifiers to power your speakers. Always make sure that the receiver is switched off and unplugged from the wall outlet before making or changing any connections. The arrows indicate the direction of the audio signal. ANALOG IN L VSX-D811S ANALOG IN OPT DIGITAL IN OPT ASSIGNABLE ANTENNA DVD 7.1CH INPUT CENTER SUB W. AUX IN (TV / SAT) IN ¥ (CD-R/ ø / TAPECD / MD) 1 DIGITAL OUT 2 RY FM UNBAL IN 75 IN IN IN R L L SURROUND BACK L Surround channel amplifier R S - VIDEO MONITORSURROUND OUT R L VCR / DVR AM LOOP PREOUT ASSIGNABLE ( D V D / LD) IN ¥ COMPONENT (DVD/ LD) ¥ VIDEO Front channel amplifier R IN R FRONT S TV / SAT P IN DVD E / LD FRONT A DVD A 5.1CH K REC INPUT IN CD-R E / TAPE / MD R S L PLAY PB LVIDEO SURROUND PLR BACK Y CENTER PB (T V / SAT) IN ø PR R SURROUND BACK L R FRONT R SURROUND CENTER R SURROUND L R FRONT ANALOG IN Surround back channel amplifier ANALOG IN Center channel amplifier L OUT AC OUTLET MONITOR OUT B SUB WOOFER PREOUT AUDIO INPUT Powered subwoofer • To hear sound only from the pre-outs, disconnect any speakers that are connected directly to the receiver. • If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 39) to large. 24 En XRB3013A.13.25 24 01.12.12, 4:43 PM Connecting up 03 AC outlet [switched 100 W (0.8 A) max] Power supplied through this outlet is turned on and off by the receiver's POWER switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A). AC OUTLET SWITCHED 100 W MAX 0.8 A MAX DO NOT CONNECT A MONITOR, TV SET, HEATER, OR SIMILAR APPLIANCE TO THIS UNIT'S AC OUTLET. Do not connect appliances with high power consumption to the AC OUTLET in order to avoid overheating and fire risk. This can also cause the receiver to malfunction. • Make sure no exposed speaker wire is touching the rear panel, this may cause the receiver to turn off automatically. • This unit should be disconnected by removing the power plug from the wall socket when not in regular use (ex. when on vacation). POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement. Operating other Pioneer components By connecting a control cord (optional), you can point the remote controls of other Pioneer components at the receiver’s remote sensor. The remote control signals are received by the remote sensor of this unit, and sent to the other devices via the CONTROL OUT terminal. CONTROL IN OUT CONTROL OUT Receiver Other Pioneer products with Î mark Remote control unit Connect to CONTROL IN terminal of other Pioneer products with Î mark. 25 En XRB3013A.13.25 25 01.12.12, 4:43 PM LISTENING MODE buttons STANDARD (pages 32.31 26 01. 6 MASTER VOLUME 7 PHONES jack Use to connect headphones. 8 STATION (+/–) buttons (pages 46–47) Selects station presets when using the tuner. ADVANCED SURROUND (pages 33. Use it to select options after pressing TONE CONTROL. 34) Press for Standard decoding and to switch between the various Pro Logic II options. When the headphones are connected. 3 Remote sensor Receives the signals from the remote control. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source. there is no sound output from the speakers. INPUT SELECTOR MULTI JOG ENTER STANDBY STANDBY/ON MASTER VOLUME UP DOWN PHONES R 7 6 8 9 STATION TUNING 10 STANDARD ADVANCED SURROUND 11 12 13 14 15 16 STEREO/ DIRECT SIGNAL SELECT MIDNIGHT/ LOUDNESS SPEAKERS MONITOR TONE QUICK SETUP MULTI JOG LISTENING MODE VIDEO INPUT TUNER EDIT CLASS BAND MPX INPUT ATT FL DIMMER MULTI JOG DIGITAL IN S-VIDEO 24 23 22 21 20 19 18 VIDEO L AUDIO R 17 1 STANDBY/ON Switches the receiver between on and standby. STEREO/DIRECT (pages 32.12. 9 TUNING buttons (page 45) Selects the frequency when using the tuner.12. 35) Switches direct playback on or off. 35) Use to switch between the various surround modes. 26 En XRB3013A. 10 4 ENTER 5 MULTI JOG/INPUT SELECTOR dial The MULTI JOG/INPUT SELECTOR dial performs a number of tasks. 2 STANDBY indicator Lights when the receiver is in standby.26. 4:43 PM .04 Controls and Displays Front panel 1 3 2 4 5 AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m-Û≥.. QUICK SETUP or TUNER EDIT. Display 1 2 3 10 11 1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO Lights when AUTO signal select is on 4 12 5 6 13 7 8 9 14 15 SB (VSX-D811S only) Depending on the source.26. which you can then adjust with the MULTI JOG/INPUT SELECTOR dial. 14 MONITOR Press to switch tape monitoring on/off. 12 MIDNIGHT/LOUDNESS (page 36) Use Midnight when listening to movie soundtracks at low volume.Controls and Displays 04 18 11 SIGNAL SELECT (pages 34. DIGITAL Lights when a digital audio signal is detected. 27 En XRB3013A. 16 QUICK SETUP 17 VIDEO INPUT (page 18) DIGITAL IN (VSX-D811S only) (page 18) 23 CLASS (pages 46–47) Switches between the three banks (classes) of station presets. 19 FL DIMMER Use this button to make the fluorescent display (FL) dimmer or brighter. 13 SPEAKERS Use to cycle through the speaker system: A = B = A+B 21 MPX (page 45) Press to receive a radio broadcast in mono. 15 TONE Press this button to access the bass and treble controls. 20 INPUT ATT Use to attenuate (lower) the level of an analog input signal to prevent distortion. this lights when a signal with surround back channel encoding is detected.31 27 01. 48) Use to select an input signal. 37. 4:43 PM .12. 22 BAND (page 45) Switches between AM and FM radio bands. Use Loudness to boost the bass and treble at low volume. 24 TUNER EDIT (pages 46–47) Press to memorize and name a station for recall using the STATION +/– buttons.12. 26. Depending on your level settings for each channel. 28 En XRB3013A. 9 Speaker indicator Shows the speaker system currently in use. this lights to indicate Pro Logic II decoding. ---dB indicates the minimum level. 14 TUNER indicators STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode. balance. 15 Master volume level Shows the overall volume level. and Dolby Surround effects. 2 DTS When the Standard mode of the receiver is on.04 Controls and Displays 2 DIGITAL Lights when a Dolby Digital signal is detected. MONO: Lights when the mono mode is set using the MPX button.12. TUNED: Lights when a broadcast is being received. Advanced surround.12. DTS Lights when a source with DTS audio signals is detected. 10 Character display 11 Neo:6 (VSX-D811S) Lights during NEO:6 processing 12 ADV. and −0 dB indicates the maximum level. this lights to indicate decoding of a Dolby Digital signal. 8 MONITOR Lights when MONITOR is selected (page 48). 4:43 PM . 13 LOUDNESS Lights when LOUDNESS has been selected. This function bypasses all tone.31 28 01. the maximum level can range between –10 dB and –0 dB. ANALOG Lights when an analog signal is detected. SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 5 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. this lights to indicate decoding of a DTS signal. 7 MIDNIGHT Lights during Midnight listening. 3 2 DIGITAL When the Standard mode of the receiver is on. 6 DIRECT Lights when source direct playback is in use. 4 2 PRO LOGIC II When the Standard mode of the receiver is on. EDIT/GUIDE ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU ¡ 4 ¢ 1 TOP MENU REMOTE SETUP INPUT SEL. TEST TONE (page 44) Sounds the test tone when setting up the surround sound of the receiver.ACCESS T. 3 RCV Switches the remote to controls the receiver (used to select the features above the number buttons. INPUT ATT Attenuates (lowers) the level of an analog input signal to prevent distortion (when the overload indicator lights). 4:43 PM . EFFECT +/– buttons (page 35) Adds or subtracts the amount of effect with different advanced listening modes (except 5 or 6 Ch Stereo and Virtual SB).SURR.31 29 01. enter commands for TV or DTV. 29 En XRB3013A. The display flashes when it isn’t possible to use a function. FL. DIMMER). STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE RECEIVER CONTROL TUNE S ETU P ST ST 12 ENTER TUNE 13 CHANNEL MENU TV VOL TV INPUT 9 4 Number buttons/Receiver controls/ ENTER Use the number buttons to directly select a radio frequency (page 45) or the tracks on a CD.12. FL DIMMER Dims or brightens the display.Controls and Displays 04 Remote control 4 DVD TV VCR CD-R TUN CD TVC 1 2 3 TEST TONE INPUT ATT FL DIMMER 4 5 6 CH SELECT LEVEL 8 7 9 EFFECT 0 DTV INFO 6 7 8 DISPLAY/DISC (ENTER) The button’s use depends on the component selected. INPUT ATT. LEVEL +/– (page 44) Adjusts the levels of the surround sound of the receiver. etc.26. It can be used to switch the display between the station preset name and the frequency for the tuner. 2 MULTI CONTROL buttons Press to select control of other components (see Controlling the Rest of Your System on pages 49–52). 1 SOURCE Press to turn on/off other components connected to the receiver. MULTI CONTROL RCV +10 5 10 11 RECEIVER SOURCE 1 2 3 MPX/RETURN DISPLAY DISC ENTER D. (ex. AUDIO SUB TITLE ANGLE STANDARD ADV. and can also be used to select a disc in a multiCD player.12. Also use this button to set up surround sound (pages 38. 44). CH SELECT (page 44) Selects a speaker when setting up the surround sound of the receiver. MASTER VOLUME 14 TV 15 TV CONTROL AV PRE-PROGRAMMED REMOTE CONTROL UNIT Receiver Controls Press the RCV button first to access the functions above the number buttons. DVD. 35) Switches direct playback on or off. MPX/RETURN (page 45) Switches between stereo and mono reception of FM broadcasts. SUBTITLE Displays/changes the subtitles included in multilingual DVD-Video discs. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source. 4:43 PM . DTV ON/OFF Switches a digital TV on/off. ANGLE Switches camera angles on discs with multi-angle scenes. 35) Use to switch between the various surround modes.12. SIGNAL SELECT (pages 34. TOP MENU Displays the disc ‘top’ menu of a DVD. 30 En XRB3013A. Also acts as a stop button for CDs. 7 REMOTE SETUP (pages 49–52) Press this button to set up the remote control to control other components. CLASS (page 46–47) Switches between the three banks (classes) of radio station presets.) are used to control a component after you have selected it using the MULTI CONTROL buttons.04 Controls and Displays 5 Component/Tuner controls The main buttons (3. The tuner/ DTV controls above these buttons can be accessed after you have selected the corresponding MULTI CONTROL button (TUNER or DVD (when connected to DTV)). EDIT/GUIDE (page 46–47) Press to memorize and name a station for recall using the STATION +/– buttons. INPUT SELECT Use to select the input source. 37. ACCESS (page 49) After pressing. STEREO (pages 32. AUDIO Changes the audio language or channel. you can access a radio station directly using the number buttons.12. BAND (page 45) Switches between the tuner AM and FM bands. 34) Press to switch between the various Dolby/ DTS modes ADV. T. If the signal is weak then switching to mono will improve the sound quality. 8 RECEIVER CONTROL buttons STANDARD (pages 32. DTV INFO Use to bring up information screens on a digital TV. depending on the component you’ve selected. (pages 33. 48) Use to select between an input signal. Also displays the guides on a digital TV.26. 6 DVD controls (Press DVD first to access) These controls will also function as DTV controls. DTV MENU Displays menus on a digital TV. or DVDs. 7. SURR. D. tapes.31 30 01. etc. 31 31 01. TV VOLUME +/– Use to adjust the volume on your TV. 10 LED DISPLAY This display flashes when a command is sent from the remote control. MUTE Mutes the sound (or restores the sound if it has been muted).12.12. Also skip tracks backward or forward on CDs. DVDs.Controls and Displays 04 MIDNIGHT/LOUDNESS (page 36) Switches to Midnight or Loudness listening. etc. Also used to control DVD menus/options and for deck 1 of a double cassette deck player. Use the TUNE +/– buttons to find radio frequencies and use ST +/– to find preset stations (page 45–47). 14 MASTER VOLUME +/– Use to set the listening volume. TV Use to turn on/off the power of the TV. 4:43 PM . It also displays TV and DTV menus. 31 En XRB3013A. 9 TV control buttons These buttons can only be used to control your TV. TV INPUT Use select the TV function. 13 CHANNEL +/– Select radio station presets. 12 }]‘’ (TUNE/ST +/–) /ENTER Use the arrow buttons when setting up your surround sound system (see pages 38–43). 11 RECEIVER This switches between standby and on for this receiver.26. 15 MENU button Displays the disc menu of DVD-Video discs. 05 Playing sources Introduction to Sound Modes There are three basic sound options: Stereo/ Direct. refer to the table on the next page. Loudness. The other surround sound options (next column) can add multi-channel sound to regular stereo sources. Standard or Advanced Surround. Most Dolby 1 or Surround software is marked 3. The channel separation and movement of surround effects is comparable to Dolby Digital 5. For more on this. and the sound mode you have selected. you may not get sound from the surround back speakers in your setup.32. With DIRECT. The Neo:6 Music mode plays the stereo source as is through the front left/right speakers. Standard mode The standard mode can be used to decode Dolby Digital.1 channel surround sound and is suitable for music. Pro Logic II Music This mode gives 5. Depending on the source. so may be useful when Pro Logic II Movie/ Music modes don’t give good results. It is less sensitive to the quality of the source material. ambient surround and center sound. In STEREO. and generates a natural. or Dolby Surround sources.12. you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). 32 En XRB3013A. You can identify Dolby Digital software by the marks.1 channel surround sound and is suitable for movies. DTS.1 channel surround sound and is suitable for music. Dolby Digital and DTS multichannel sources are downmixed to stereo. If you switch on Midnight listening. but unmarked software may also incorporate Dolby Surround. Neo:6 Cinema (VSX-D811S only) This mode gives 6. you’ll hear the audio with your surround settings and you can still use the Midnight. you will bypass all effects and surround settings so that the audio remains as close to the source audio signal as possible. the 6. The Neo:6 Cinema mode delivers good channel separation for movie soundtracks. The surround effect is more enveloping than Pro Logic II Movie. It is suitable for movies. and Tone control functions. 4:44 PM . or the Tone controls when DIRECT is selected.1 channel surround sound. Pro Logic II Movie This mode gives 5. Neo:6 Music (VSX-D811S only) This mode gives 6.37 32 01.1 channel surround sound. the receiver automatically switches to STEREO. This mode gives 4. especially those recorded in Dolby Surround.1 channel setting (page 40).12. Choose one of the following to add depth to a 2 channel source: Pro Logic Stereo/Direct When you select STEREO or DIRECT.1. Loudness. 1 channel source. This mode is especially designed to give sound depth to stereo sources. and lets you hear twochannel (stereo) signals as simulated multichannel surround sound. but some modes are also suited for music sources. You can also use with Dolby Digital sources for a wider stereo field than the Standard modes. you may not get sound from the surround back speakers in your setup. Use with Dolby Pro Logic for a stereo surround effect. 6-Channel Stereo (VSX-D811S) This can be selected to give multi-channel sound to a stereo source. 6. Music Simulates the acoustic environment of a large concert hall and is suitable for music or musical sources.1 surround Auto √ √ √ √ Fix √ √ √ √ Dolby Digital/DTS encoded multi-channel sources with stereo surround Auto √ √ √ Dolby Digital/DTS encoded multi-channel sources with mono surround. Most Advanced Surround modes are designed to be used with film soundtracks.1 channel setting (page 40). and is suitable for watching movies. 33 En XRB3013A. setting Standard DTS-ES/Dolby Digital Matrix encoded multi-channel sources with 6. • See the 6.1 ch. This can be selected to give multi-channel sound to a stereo source. Stereo sources Auto Analog 2-channel (stereo) source Auto Type of source Fix Fix Fix √ Advanced Virtual SB Expanded Movie/Music √ 6 Ch. the 6. using all of the speakers in your setup. The Virtual Surround Back effect simulates 7. refer to the table below. Try different settings with various soundtracks to see which you like. Stereo √ √ √ √ √ √ • The checkmark (√) indicates when sound will be output from the surround back speaker(s). using all of the speakers in your setup. and the sound mode you have selected. For more on this.1 channel setting on page 40 to select between AUTO or FIX. Movie 5-Channel Stereo (VSX-D711) Simulates the relaxed environment of a movie theater. Expanded Depending on the source.Playing sources 05 Advanced Surround modes Virtual Surround Back (VIRTL SB) These are designed to be used with multichannel surround sound audio/visual sources (like DVDs and LDs).12.12. 4:44 PM .1 surround channel listening.37 33 01.32. giving the impression that there are two surround back speakers in your system when listening to a 5. 48kHz. ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU ¡ 4 ¢ TOP MENU REMOTE SETUP INPUT SEL. 2 DIGITAL lights when a Dolby Digital signal is input. DISPLAY DISC ENTER DTV INFO TUNE ST S ETU P ST ENTER TUNE CHANNEL 1 Switch on the playback component.05 Playing sources Choosing the input signal • You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. and DTS lights when a DTS signal is input.SURR. The default is AUTO. make the proper digital connections (page 14) and set the signal input to DIGITAL.EDIT/GUIDE AUDIO SUB TITLE ANGLE STANDARD ADV.ACCESS T. DTS. TV VCR CD-R MULTI CONTROL RCV TUN CD TVC 1 2 3 TEST TONE INPUT ATT FL DIMMER 4 5 6 CH SELECT LEVEL 8 7 9 +10 EFFECT DISPLAY DISC ENTER D.ACCESS T.37 34 01. D. Use the MULTI CONTROL buttons on the remote (or MULTI JOG/INPUT SELECTOR dial on the front panel). MPX/RETURN 1 • Press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component. 2 Select the source you want to playback. and 96 kHz) and DTS digital signal formats. set to ANALOG. or Dolby Surround encoded. PCM (32kHz.1ch (VSX-D711) and DVD 7. 4:44 PM . refer to the instruction manual supplied with your DVD player.12. DVD 5. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE Listening to multi-channel playback ¢ RECEIVER SOURCE REMOTE SETUP INPUT SEL.EDIT/GUIDE 0 DTV INFO MPX/RETURN ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU 1 TOP MENU ¡ 4 AUDIO SUB TITLE ANGLE STANDARD ADV. DVD TV VCR CD-R RECEIVER CONTROL MULTI CONTROL TUNE ST S ETU P RCV ST TVC 1 2 3 TEST TONE INPUT ATT FL DIMMER 4 5 ENTER TUNE TUN CD 6 CH SELECT LEVEL 8 7 CHANNEL 9 +10 EFFECT 0 When set to DIGITAL. the proper decoding format will automatically be selected and shows in the display. 34 En XRB3013A. To prevent noise. 44kHz.SURR. For more details. You need to hook up a component to both analog and digital inputs on the rear of the receiver to select between input signals.32. ANALOG and DIGITAL. With other digital signal formats.1 ch/DVD 7.1ch (VSXD811S) will only appear when DVD/LD is selected using the remote or the MULTI JOG/ INPUT SELECTOR dial on the front panel. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE RECEIVER CONTROL Each press switches between AUTO. RECEIVER SOURCE DVD • Some DVD players don’t output DTS signals.1ch. If the source is Dolby Digital. DVD 5. • This receiver can only play back Dolby Digital. 3 Press STANDARD.12. Movie Music Virtual SB 4 Start playback of the component you selected in step 1.Playing sources 05 If you are listening to a two channel source. • Press STEREO (STEREO/DIRECT on the front panel) repeatedly to switch between the two options. (ADVANCED SURROUND) repeatedly to cycle the sound options. Each press changes the display as follows: Refer to page 32 for more details about each mode. The Standard mode cannot be changed. Dolby Pro Logic. each press changes the display as follows: Pro Logic II Movie Pro Logic II Music Pro Logic NEO:6 Music* NEO:6 Cinema* * VSX-D811S only Using Advanced Surround When you select one of the Advanced surround options. Dolby Digital and DTS multichannel sources are downmixed to stereo. Dolby Digital and DTS decoding is done automatically corresponding to the input signal.37 35 01.12.SURR. If you switch on Midnight listening. 35 En XRB3013A. Use Advanced surround to add effects to the surround sound. ** VSX-D811S Refer to page 33 for more details about each surround effect. the receiver automatically switches to STEREO. The Advanced surround effects can be adjusted in the range of 10 to 90 (the default setting is 70) by pressing RCV then pressing EFFECT +/– .32. you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). • Press ADV. The effect level can be set for each Advanced surround mode. See page 32 for more on these modes. 4:44 PM . Loudness. or the Tone controls when DIRECT is selected.12. 5-Stereo*/ 6-Stereo** Expanded * VSX-D711 Using Stereo/Direct When you select STEREO or DIRECT. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE ¢ TUNE ST Depending on what you are listening to.. The effect automatically adjusts according to the volume at which you’re listening. 4:44 PM . 2 Use the MULTI JOG/INPUT SELECTOR dial to change the amount of bass or treble as necessary. 1 Press TONE to select the frequency you want to adjust. N∫m-Û≥.12. QUICK SETUP MULTI JOG VIDEO INPUT AUDIO ¡ AUDIO RECEIVER CONTROL Using the tone controls L T. you may want to adjust the bass or treble using the front panel tone control. INPUT SELECTOR MULTI JOG 2 ENTER MASTER VOLUME UP DOWN Turn on the power of the receiver. VIDEO DISPLAY DISC D.12. 3 Select the source you want to playback.SURR. The Midnight listening feature allows you to hear effective surround sound of movies at low volume levels. Each press switches between BASS and TREBLE. Use the MULTI CONTROL buttons on the remote (or MULTI JOG/INPUT SELECTOR dial on the front panel).ACCESS ¶ TOP MENU REMOTE SETUP S-VIDEO MPX/RETURN ENTER BAND 1 Loudness TONE 9 EFFECT 0 DTV INFO MONITOR 8 +10 Off SPEAKERS LEVEL 7 Midnight TVC FL DIMMER CH SELECT AUDIO/VIDEO MULTI-CHANNEL RECEIVER CD-R MULTI CONTROL RCV R R 4 Start playback of the component you selected in step 1.05 Playing sources Using Loudness and Midnight listening The Loudness listening feature can be used to get good bass and treble from music sources at low volume levels.37 36 01. Each press cycles through the effects as follows: DVD TV VCR TUN CD 1 2 TEST TONE INPUT ATT 4 5 3 6 7 3 8 DTV ON/OFF DTV MENU 4 SUB TITLE ANGLE STANDARD ADV. Playing other sources RECEIVER SOURCE • Press MIDNIGHT/LOUDNESS. Wait about five seconds for your changes to be input automatically.EDIT/GUIDE CLASS INPUT SEL. S ETU P ST ENTER TUNE CHANNEL 1 Turn on the power of the playback component. 36 En XRB3013A.32. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE RECEIVER CONTROL TUNE ST S ETU P ST ENTER TUNE CHANNEL 1 Press DVD or select it with the MULTI JOG/INPUT SELECTOR dial (front panel).EDIT/GUIDE AUDIO SUB TITLE ANGLE STANDARD ADV. only the volume and channel levels can be set. and MIDNIGHT/LOUDNESS buttons.37 37 01. D.1ch/DVD 7. use the SIGNAL SEL (SIGNAL SELECT) button to select a different input signal. as well as the Standard.12.32. RECEIVER SOURCE DVD TV VCR CD-R MULTI CONTROL RCV TUN CD TVC 1 2 3 TEST TONE INPUT ATT FL DIMMER 4 5 6 CH SELECT LEVEL 8 7 9 +10 EFFECT 0 DISPLAY DISC ENTER DTV INFO MPX/RETURN ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU ¡ 4 ¢ 1 TOP MENU REMOTE SETUP INPUT SEL. 2 Press SIGNAL SEL (SIGNAL SELECT) repeatedly to select DVD 5.ACCESS T. To cancel playback from the multi-channel inputs. and Stereo/Direct sound modes. TONE. If you have connected a decoder or a DVD player with multi-channel analog outputs to this receiver (page 17).Playing sources 05 Selecting the multi-channel analog inputs • When playback from the multi-channel inputs is selected. 37 En XRB3013A. 4:44 PM .SURR. Advanced Surround. you can’t use the INPUT ATT. you must select the analog multi-channel inputs for surround sound playback.1ch. • When playback from the multi-channel inputs is selected.12. 44 38 01.06 Setting up the receiver Choosing your receiver setup To ensure the best possible surround sound. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE ¢ RECEIVER CONTROL TUNE ST S ETU P ST ENTER TUNE LFE attenuator setting (page 41) Specify the peak level for the LFE channel.12. ENTER DTV INFO REMOTE SETUP 6. RECEIVER SOURCE RCV 3 Use } or ] to choose the option you want to adjust. following the order below (and on the following pages). Surround back speaker distance setting (VSX-D811S only) (page 42) Specifies the distance from your listening position to your surround back speakers. This is particularly important when using Dolby surround. CHANNEL 1 Press RECEIVER to turn the power on.12. Center speaker distance setting (page 41) Specifies the distance from your listening position to your center speaker. The current setting is shown for each option as you cycle through the display. DVD TV VCR TUN CD 1 2 TEST TONE INPUT ATT 4 5 3 6 LEVEL 8 7 9 EFFECT +10 0 DISPLAY DISC MPX/RETURN ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU INPUT SEL. be sure to complete the following set up operations. Subwoofer setting (page 40) Specify how the subwoofer is used. 38 En XRB3013A. The STANDBY indicator goes out. you’ll have to set the Crossover frequency to 200kHz.EDIT/GUIDE ¡ 4 AUDIO SUB TITLE ANGLE STANDARD ADV.1 channel decoding is used. It will be easiest to adjust each of the settings in turn. Press RCV. Front speaker distance setting (page 41) Specify the distance from your listening position to your front speakers. Refer to the following pages for details on each of the settings. Surround speaker distance setting (page 41) Specify the distance from your listening position to your surround speakers. 2 Crossover frequency setting (page 40) Determine which frequencies will be sent to the subwoofer (or large speakers).SURR. CD-R MULTI CONTROL TOP MENU Speaker setting (page 39) Specify the number and type of speakers you have connected.). You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers. D. 4:46 PM . If you are using the Pioneer S-FCRW220 speaker system.ACCESS T. TVC FL DIMMER CH SELECT 1 Surround back speaker setting (VSXD811S only) (page 40) Specify your surround back speaker/ surround back subwoofer setup.38. etc.1 channel setting (VSX-D811S only) (page 40) Set when 6. You can leave the Speaker setting and the Subwoofer setting in the default settings. 4:46 PM . Component video input setting (page 42) Specify the components to be assigned to the component video inputs (below). The setting is entered automatically. and (asterisk) if no speaker is connected. 6 One of the following configurations should match your setup: FS-CS-SS FL-C -SS FS-CS-S FL-C -SL FS-C -SS FL-CS-S FL-CL-SL FL-CS-SS FL-CL-SS FL-CS-SL FL-CL-S When you’re done. F.12. S for small speakers. 39 En XRB3013A.Setting up the receiver Dynamic range control setting (page 42) Compress the dynamic range of the sound track. and S refer to front. center. press ENTER to exit. set the speaker size to L. • Cycle through the available choices using ’ or ‘ and choose a configuration that matches your speaker setup.44 39 01. • Coaxial digital input 1 setting • Coaxial digital input 2 setting • If the cone size (diameter) of the speaker is larger than 5 inches. Digital input settings (page 43) Specify the components to be assigned to the video and digital inputs (below). 5 Repeat steps 3 and 4 to set other surround modes. • If you’re not using a subwoofer. • Component video 1 input setting 06 Speaker setting • Default setting: S (all speakers) You must let the receiver know how many speakers you have. Dual mono setting (page 42) Isolate one channel when listening to discs with dual mono encoding. and how big they are. we recommend setting the front speakers to L. • Component video 2 input setting Surround back channel input setting (VSX-D811S only) (page 43) Specify the number of surround back inputs you have connected.12. Speaker size is denoted as L for large speakers. • Optical digital input 1 setting • Optical digital input 2 setting (VSX-D811S only) 4 Use ’ or ‘ to adjust the setting.38. and surround speakers respectively. C. In the display. The setting display is automatically exited after 20 seconds of inactivity. The size you choose (large or small) determines how much bass is sent from the receiver to the speakers. With 5. 5. • If you chose SB in Surround back speaker setting (above). Choose (asterisk) if no speaker is connected. 150 Hz or 200 Hz). SB S.1 AUTO.1 channel setting (VSX-D811S only) Crossover frequency setting • Default setting: 6.1 FIX or 6. you will get the bass sounds from the subwoofer even if the front speakers are set to L. Since most smaller speakers can’t handle deep bass tones. • Use ’ or ‘ to select SB L. • If you chose the small front speaker setting. • Use ’ or ‘ to select 6. you can send these sounds to the subwoofer (or if you don’t have a subwoofer. • When you select the plus setting.1 FIX). PLS or OFF.1 encoded material) with 6.12. Use the plus (PLS) setting for extra bass. • Refer to the table on page 33 to see how the 6. or you can choose to listen to other kinds of sources (for example. a surround back channel will be generated. 100Hz 150Hz 200Hz 100 Hz Sends bass frequencies below 100 Hz to the subwoofer (or L speakers).06 Setting up the receiver Surround back speaker setting Subwoofer setting • Default setting: ON (VSX-D811S only) • Default setting: S You must let the receiver know if surround back speaker(s) have been connected.12. 4:46 PM . the large (L) speakers in your system) instead of the speakers set to small (S) in your setup. SB or SB SUBWF.1 channel setting affects sound output from the surround back speakers. • Use ’ or ‘ to specify the crossover frequency for your small speakers (100 Hz.1 channel setting and shows in the display.44 40 01. and how big they are.38.1 encoded sources. If you have connected a surround back subwoofer.1 FIX • Default setting: 100 Hz You can have the receiver automatically switch to Dolby Digital or DTS-ES decoding for 6. We recommend setting this to 200 Hz if your S speakers are smaller bookshelf-type speakers. you can’t set the 6. 40 En XRB3013A. Choose the point at which you want the frequency routed to the subwoofer (or L speakers).1 format for which it was originally encoded. you should select the surround back subwoofer setting (SB SUBWF) from the options.1 encoded sources (6. • Use ’ or ‘ to select subwoofer ON. You can choose whether the subwoofer is used or not.1 AUTO). Crossover frequency is the point where the receiver divides the high and low sounds (the frequencies) between the speakers. 6. SUBWF ON is automatically set and locked. The size you choose (large or small) determines how much bass is sent from the receiver to the speakers.1 encoding (6. but the material may sound better in the 5. 41 En XRB3013A. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers. • Use ’ or ‘ to set the distance of the center speaker from the main listening position (within a 30 foot range). set the center speaker distance setting to delay the sound from the center speaker so that the sound from the front and center speakers will be heard at the same time. • Use ’ or ‘ to set the attenuation level (0 dB.12. The center speaker is normally placed directly in the front of the listening room and closer to the listening position than the front speakers. center. ( 06 Center speaker distance setting • Default setting: 10 ft. When S is selected in the speaker setting. and surround) are set to L. the crossover frequency can’t be set because there are no S speakers appears in the display). To prevent this. you should set the distance of the surround speakers accurately to hear sounds coming from both front and surround speakers at the same time.44 41 01. 4:46 PM . 0 dB 10 dB ∞ (displays ) When ∞ is selected ( appears in the display). LFE attenuator setting • Default setting: 0 dB Dolby Digital and DTS audio sources include ultra-low bass tones. the center speaker distance can’t be set.12. Sets the distance from the front speakers to the listening position. the surround speaker distance can’t be set. 10 dB or dB(∞)). Surround speaker distance setting • Default setting: 10 ft.Setting up the receiver 150 Hz Sends bass frequencies below 150 Hz to the subwoofer (or L speakers). LFE is not available. 200 Hz Sends bass frequencies below 200 Hz to the subwoofer (or L speakers).38. If all speakers (front. Like the center speaker. Front speaker distance setting • Default setting: 10 ft. • Use ’ or ‘ to set the distance of the surround speakers from the main listening position (within a 30 foot range). When C is selected in the speaker setting. • Use ’ or ‘ to set the distance of the front speakers from the main listening position (within a 30 foot range). This means that the sound from the center speaker will be heard before the front speakers. you can compress the dynamic range. the surround back speaker distance can’t be set. In the L ch 1. so that low level sounds can be heard more easily (sounding relatively louder) yet louder sounds won’t be too overbearing. R ch 2 setting. VCR or OFF). you should set the distance of the surround speakers accurately to hear sounds coming from both front and surround speakers at the same time. • Use ’ or ‘ to set the distance of the surround speakers from the main listening position (within a 30 foot range).06 Setting up the receiver Surround back speaker distance setting Dual mono setting (VSX-D811S only) The dual mono setting can only be used when listening to Dolby Digital discs with dual mono encoding. you will hear the channel you have selected through both front speakers.12. When SB is selected in the surround speaker setting. VCR or OFF). Like the center speaker. With this setting you can choose which channel in the dual mono setting you want to listen to. • Default setting: ch1 If Dolby Digital mode is switched on. • Use ’ or ‘ to cycle through the possible dual mono settings. • Press ’ or ‘ to set the dynamic range control (OFF. With Dolby Digital mode off. or if you don’t have a center speaker. With this setting. 42 En XRB3013A.44 42 01. MAX. set to MAX for maximum dynamic range compression. 1 Use ’ or ‘ to assign the component video 1 input (DVD. • When the volume level is increased. you will hear the channel you have selected (either ch1 or ch2) through your center speaker. TV. Component video 2: • Default settings: DVD • Default setting: TV 2 Use ’ or ‘ to assign the component video 2 input (DVD.38. but are sometimes used when it is necessary to have one language on one channel and a different language on the other. Dynamic range control setting • Default setting: OFF Dynamic range is the difference between the loudest and softest sounds in any given signal. L ch 1. the left front speaker will play channel 1 and the right front speaker will play channel 2. • Dynamic range control is effective only when a Dolby Digital signal is being played back. set to OFF. 4:46 PM .12. • Default setting: 10 ft. These discs are not widely used. or MID). Component video 1: • When listening at low volumes. TV.R ch 2 ch2 ch1 Component video input settings Here you tell the receiver what components you have hooked up to the component video jacks on the back of the receiver. TV.44 43 01. • Use ’ or ‘ to select SB 2ch IN or SB 1ch IN. Optical digital 2 (VSX-D811S only): • Default setting: CDR/TAPE/MD Coaxial digital input settings Here you tell the receiver what components you have hooked up to the coaxial DIGITAL IN jacks 1 and 2 on the back of the receiver. 06 Optical digital input settings Here you tell the receiver what components you have hooked up to the optical DIGITAL IN jack(s) on the back of the receiver. Coaxial digital 2: • Default setting: CD 2 Use ’ or ‘ to assign the coaxial digital 2 input (DVD. After you assign a component to a digital jack. a DVD player) the receiver automatically changes to the digital input setting and DIGITAL shows in the display. otherwise leave it set to SB 2ch IN. TV. 4:46 PM . 1 Use ’ or ‘ to assign the coaxial digital 1 input (DVD. whenever you select that component. CD. whenever you select that component. If this is the case. CD-R. VCR or OFF). TV. select SB 1ch IN. (for example. CD-R.12. VCR or OFF). CD. CD. CD. (for example.38. a DVD player) the receiver automatically changes to the digital input setting and DIGITAL shows in the display. VCR or OFF). After you assign a component to a digital jack. 43 En XRB3013A.Setting up the receiver Surround back channel input setting (VSX-D811S only) • Default setting: SB 2ch IN You only have to make this setting if you are using a seperate component for decoding DVDs. TV. Optical digital 1: • Default settings: TV/SAT 1 Use ’ or ‘ to assign the optical digital 1 input (DVD. Coaxial digital 1: • Default settings: DVD/LD 2 Use ’ or ‘ to assign the optical digital 2 input (DVD. and the component has only one surround back channel output. CD-R. CD-R.12. VCR or OFF). 3 Press MASTER VOLUME +/– to adjust the volume to an appropriate level. DVD TV VCR TUN CD 1 2 TEST TONE INPUT ATT 4 5 3 6 LEVEL 8 7 Press RCV. press TEST TONE to turn off the test tone. The channel level range is ± 10 dB.44 44 01. • Since the subwoofer transmits an ultralow frequency its sound may seem quieter than it actually is. You can set seperate levels for each surround mode.12. The speaker volume can be adjusted without outputting the test tone by pressing CH SELECT and then using LEVEL +/–. 5 When you’re done. ¡ 4 AUDIO SUB TITLE ANGLE STANDARD ADV.SURR. The test tone is output in the following order (depending on the speaker setting): MPX/RETURN DISPLAY DISC ENTER D. please refer to Speaker setting on page 39 to make sure you have correctly specified your speaker setup. TVC FL DIMMER CH SELECT 1 CD-R MULTI CONTROL RCV 9 +10 EFFECT 0 DTV INFO 2 Press TEST TONE to output the test tone. you should set the relative channel levels from the main listening position.06 Setting up the receiver Setting the relative volume level of each channel • Default setting: 0db RECEIVER SOURCE For best surround sound playback.to adjust the speaker levels in turn. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE ¢ RECEIVER CONTROL TUNE FL C FR S ETU P ST ST ENTER SR TUNE CHANNEL SW SB* SL MENU TV VOL TV INPUT *VSX-D811S only MASTER VOLUME TV TV CONTROL AV PRE-PROGRAMMED REMOTE CONTROL UNIT If you don’t hear a test tone from one of your speakers. • Test tone is only output in Standard modes.EDIT/GUIDE ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU 1 TOP MENU REMOTE SETUP INPUT SEL. 4:46 PM . 4 Use LEVEL +/.12. You should hear the test tone at the same volume from each speaker when seated in the main listening position.ACCESS T.38. 44 En XRB3013A. Each press switches the band between FM and AM. There are three ways to do this: Automatic tuning To search for stations in the currently selected band. 3 3 Tune to a station. Once you are tuned to a station you can memorize the frequency for recall later—see Saving station presets on the next page for more on how to do this. The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. Repeat to search for other stations.12. 2 Use the BAND button to change the band (FM or AM). This should improve the sound quality and allow you to enjoy the broadcast.00 (FM).12.ACCESS T. You can also use the MULTI JOG/INPUT SELECTOR dial on the front panel. 1 Press the TUN button on the remote control to select the tuner.48 45 01. you'll already know the frequency of the station you want to listen to. press and hold TUNE +/– Press D. stopping when it has found one. 0. if necessary. 4:48 PM .45. press TUNE +/–. to tune to 106. In this case. press the MPX(/RETURN) button to switch the receiver into mono reception mode. press 1. 4 Use the number buttons to enter the frequency of the radio station. 6. Each press switches the band between FM and AM. see Tuning directly to a station below.EDIT/GUIDE ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU 1 TOP MENU REMOTE SETUP INPUT SEL. TUNE ST S ETU P ST ENTER TUNE CHANNEL 1 Press the TUN button on the remote control to select the tuner. ¡ 4 AUDIO SUB TITLE ANGLE STANDARD ADV. 0. TVC 3 CH SELECT DTV INFO High speed tuning Press and hold TUNE +/– for high speed tuning. You can also use the MULTI JOG/INPUT SELECTOR dial on the front panel. you can simply enter the frequency directly using the number buttons on the remote control. If you already know the frequency of the station you want. 0. 45 En XRB3013A. The receiver will start searching for the next station. DVD TV VCR Improving FM stereo sound CD-R MULTI CONTROL TUN CD 1 2 TEST TONE INPUT ATT 4 5 FL DIMMER 6 LEVEL 8 7 9 +10 EFFECT 0 MPX/RETURN DISPLAY DISC ENTER D.Using the tuner 07 Listening to the radio for about a second.ACCESS (Direct Access). RECEIVER SOURCE RCV Manual tuning To change the frequency one step at a time. If the TUNED or STEREO indicators don't light when tuning to an FM station because the signal is weak.SURR. 2 Use the BAND button to change the band (FM or AM). STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE ¢ Tuning directly to a station RECEIVER CONTROL Sometimes. Release the button at the frequency you want. if necessary. For example. 12. Use the front panel controls to store station presets. 4 Press ENTER. MEMORY. See Listening to the radio (previous page) for more on this.45. RCV TUN CD TVC 1 2 3 TEST TONE INPUT ATT FL DIMMER 4 5 6 CH SELECT LEVEL 8 7 9 EFFECT +10 0 Saving station presets AUDIO/VIDEO MULTI-CHANNEL RECEIVER N∫m-Û≥. it's convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. 2 Press T. After pressing ENTER. ENTER SIGNAL SELECT MPX/RETURN 1 If you often listen to a particular radio station.ACCESS twice to cancel the frequency and start over. or classes. stored in three banks. When saving an FM frequency. This saves the effort of manually tuning in each time.SURR. 4:48 PM .EDIT (TUNER EDIT).. INPUT SELECTOR MULTI JOG MASTER VOLUME MIDNIGHT/ LOUDNESS MONITOR SPEAKERS TONE ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU ¡ 4 ¢ TOP MENU REMOTE SETUP INPUT SEL.12. DISPLAY DISC ENTER DTV INFO QUICK SETUP UP DOWN MULTI JOG VIDEO INPUT STEREO DIGITAL IN S-VIDEO VIDEO L AUDIO R A- R STATION TUNING STANDARD ADVANCED SURROUND STEREO/ DIRECT SIGNAL SELECT MIDNIGHT/ LOUDNESS SPEAKERS MONITOR TONE QUICK SETUP MULTI JOG LISTENING MODE VIDEO INPUT TUNER EDIT CLASS BAND MPX INPUT ATT FL DIMMER MULTI JOG S-VIDEO VIDEO L AUDIO R TUNED SP A 99. The display shows ST. B and C) of 10 stations each. You can also use the the MULTI JOG/INPUT SELECTOR dial (front panel) to select a station preset. the MPX setting (see previous page) is also stored. then a blinking memory class. press D. 46 En XRB3013A. D. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE RECEIVER CONTROL TUNE ST S ETU P ST ENTER TUNE CHANNEL 1 Tune to a station you want to memorize.00 RECEIVER SOURCE DVD TV VCR CD-R MULTI CONTROL If you make a mistake halfway through.07 Using the tuner STEREO FM TUNED SP A 106. the preset class and number stop blinking and the receiver stores the station. This unit can memorize up to 30 stations.48 46 01.EDIT/GUIDE AUDIO SUB TITLE ANGLE STANDARD ADV.ACCESS T.50 3 Press CLASS to select one of the three classes then press ST +/– (STATION +/–) to select the station preset you want. (A. 1 Press TUN (remote) or use the MULTI JOG/INPUT SELECTOR dial on the front panel to select the tuner. a space is input. 47 En XRB3013A. See Listening to station presets (this page) for how to do this. Having stored up to 30 stations (see previous page).buttons (remote) to select characters. • The name is stored when ENTER is pressed after choosing the fourth character. • If the receiver is left disconnected from the AC power outlet for an extended period. 3 Press ST +/– (STATION +/–) to select the station preset you want. you can press DISPLAY when listening to a station to switch the display between the name and the frequency. you can name your station presets.Using the tuner 07 Naming station presets Listening to station presets For easier identification. 1 Choose the station preset you want to name. To erase a station name.45. 2 Press T.12. the station memories will be lost and will have to be reprogrammed. Press repeatedly to cycle through classes A. Names can be up to four characters long. • Use the MULTI JOG/INPUT SELECTOR dial (front panel) or the ST +/. • Press ENTER to confirm a character. If no character is input. 3 Input the name you want.12. B and C.48 47 01. NAME. preset stations can be easily recalled. Once you have named a station preset. The display shows ST. simply repeat steps 1-3 and input four spaces instead of a name. 2 Press CLASS to select the class in which the station is stored.EDIT (TUNER EDIT). 4:48 PM . then a blinking cursor at the first character position. 3 Prepare the source you want to record. RECEIVER SOURCE DVD TV VCR TUN CD 1 2 TEST TONE INPUT ATT 4 5 TVC 3 FL DIMMER 6 CH SELECT If you want to record a video source. video. and surround effects have no effect on the recorded signal. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE ¢ RECEIVER CONTROL TUNE ST S ETU P ST ENTER TUNE CHANNEL The receiver's volume. into the recording device and set the recording levels. Most video recorders set the audio recording level 48 En XRB3013A. then start playback of the source component. so make sure the components you are recording to/from are hooked up in the same way (see pages 13– 19 for more on connections). treble.12.12. 1 Select the source you want to record. Insert a blank tape. or from an audio or video source connected to the receiver (such as a CD player or TV). tone (bass.SURR. load the CD. • Press the MONITOR button to switch between the recorded signal and the original source signal. MD.08 Making Recordings Making an audio or a video recording automatically—check the component’s instruction manual if you’re unsure. 4:48 PM . you also need use the same type of connection for the source as for the recorder. balance. For example. you can’t record a component hooked up to S-video jacks with a recorder hooked up to the component video outputs (see page 18 for more on video connections). Press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component (see page 34 for more on this). 4 Prepare the recorder. loudness). ¡ 4 AUDIO SUB TITLE ANGLE STANDARD ADV. Refer to the instructions that came with the recorder if you are unsure how to do this. video etc. Monitoring your recording You can listen to (monitor) the recording as it's being made using the MONITOR button on the front panel (a cassette deck would have to have a record monitor function). 2 Select the input signal (if necessary). Use the MULTI CONTROL buttons on the remote (or MULTI JOG/INPUT SELECTOR dial on the front panel). 5 Start recording.45. Tune to the radio station.48 48 01. Keep in mind you can’t make a digital recording from an analog source or vice-versa. You can make an audio or a video recording from the built-in tuner. DVD etc.EDIT/GUIDE ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU 1 TOP MENU REMOTE SETUP INPUT SEL.ACCESS T. CD-R MULTI CONTROL RCV LEVEL 8 7 9 +10 EFFECT 0 DTV INFO MPX/RETURN DISPLAY DISC ENTER D. ACCESS T.Controlling the rest of your system Setting the remote to control other components 09 Selecting preset codes directly There are several ways to set your remote to control the other components in your system.12. Tape deck or MD player TV or Cable TV tuner FM/AM tuner You can do this directly.SURR. two second blink once you have entered a valid code. or by searching through different preset codes until you find the right one. • If you assign a preset code for the TUNER button. If you can’t find a preset code that matches the component you want to control.12. Reset the remote to the built-in tuner by entering the preset code 7008. D. 3 Use the number buttons to enter the 4 digit preset code (see pages 56–67) The LED blinks for half a second after you input each digit and shows a long.49. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE RECEIVER CONTROL TUNE ST S ETU P ST ENTER TUNE CHANNEL 1 Press and hold REMOTE SETUP for three seconds. 2 Press the MULTI CONTROL button for the component you want to control. The buttons can be set to control the following components: RECEIVER SOURCE DVD TV VCR CD-R MULTI CONTROL RCV TUN CD 1 2 TEST TONE INPUT ATT 4 5 TVC 3 FL DIMMER 6 CH SELECT LEVEL 8 7 9 EFFECT +10 0 Button Controllable Components MPX/RETURN ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU ¡ 4 1 TOP MENU DVD: TV: VCR: CD: CD-R: TVC: TUN: DVD or LD player TV or Satellite tuner VCR or Digital Video Recorder CD player CD Recorder. you won’t be able to control the built-in tuner of this receiver using the remote. The easiest way to do this is to assign the component’s manufacturer preset code (listed on pages 56–67) to one of the MULTI CONTROL buttons on the remote control. You can cancel or exit any of the steps by pressing and holding MUTE for three seconds. If the LED blinks three times it means an invalid code has been input or an error has occurred. 4 Repeat steps 1 through 3 for the other components you want to control. you can still teach the remote individual commands from another remote control (page 50). The LED lights steadily for two seconds.EDIT/GUIDE ¢ SUB TITLE ANGLE STANDARD ADV.67 49 01. DISPLAY DISC ENTER DTV INFO AUDIO REMOTE SETUP INPUT SEL. 4:48 PM . 49 En XRB3013A. 12. go to the next step.D. 7 Press and hold ENTER for three seconds to save the preset code. RECEIVER SOURCE DVD TV VCR TUN CD 1 2 TEST TONE INPUT ATT 4 5 TVC 3 6 LEVEL 8 9 EFFECT +10 0 DTV INFO MPX/RETURN DISPLAY DISC ENTER D. 3 Prepare the remote to learn the remote control signal from the component. VCR. when you see the component you want to control respond (by turning on or off).ACCESS T. you just scan through the last 10 codes until you find the right one. 2 Press and hold REMOTE SETUP for three seconds. start it playing. otherwise repeat this step. A batch of 10 codes is transmitted and the LED blinks during transmission. S ETU P ST ENTER TUNE CHANNEL 1 Switch on the component you want to control.SURR. 3 Press the MULTI CONTROL button for the component you want to control. Programming signals from other remote controls (VSX-D811S only) If the preset code for your component is not available.67 50 01. If the component is some kind of player (CD player. or the available preset codes do not operate correctly. 50 En XRB3013A. STEREO SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE TOP MENU REMOTE SETUP INPUT SEL. 4 Press and hold REMOTE SETUP for three seconds. RECEIVER CONTROL TUNE ST You can also verify you have the correct code by adjusting the volume.EDIT/GUIDE ¶ 7 3 8 BAND CLASS DTV ON/OFF DTV MENU 1 ¡ 4 ¢ AUDIO SUB TITLE ANGLE STANDARD ADV. To exit or cancel press and hold the REMOTE SETUP key for three seconds. If the component responds. FL DIMMER CH SELECT 7 6 Use ’ and ‘ to scan through the last 10 codes transmitted to identify the correct code. The LED lights steadily for two seconds. 1 Press REMOTE SETUP and hold for three seconds. 7.). etc. The LED lights steadily for two seconds. The remote transmits batches of 10 codes. etc. Stop when you see the component stop or switch off. The LCD display on the remote shows the I. CD-R MULTI CONTROL RCV 5 Switch the component back on or restart playback. by stopping or switching off.12. 2 Press the MULTI CONTROL button for the component you want to control. Press and hold the RECEIVER button for two seconds.09 Controlling the rest of your system Searching for preset codes Another way of entering preset codes is to use the search feature. 4:48 PM .49. you can program signals from the remote control of another component. This can also be used to program additional operations (buttons not covered in the presets) after assigning a preset code. The LED lights steadily to indicate the remote is ready accept a signal. pressing 3. 7. the LED on this receiver’s remote will go out and then light steadily. The LED lights steadily for two seconds. TV VOL +/-. 7. 2 Press the MULTI CONTROL button relating to the button setting to be erased. etc.2 inches MIDNIGHT 4 Point the two remote controls towards each other about 1-2 inches apart then press the button that will be doing the learning on this receiver’s remote control (for example 3. If this happens. until you see the the LED light steadily. • Some commands from other remote controls cannot be learned. and TV INPUT) can only be learned after selecting TV or TVC. 6 Press and hold the REMOTE SETUP button for three seconds to store the operation(s). Erasing one of the remote control button settings (VSX-D811S only) This erases one of the buttons you have programmed and restores the button to the factory default.12. 5 Press the corresponding button on the other remote control that is sending (teaching) the signal to this receiver’s remote control (for example 3. These include: RECEIVER . Press the RECEIVER button twice quickly. 4:49 PM .ACCESS 0 MPX/RETURN 10 DTV INFO TUN EFFECT 5 8 VCR 2 5.Controlling the rest of your system MASTER VOLUME TV MENU TVFUNC CHANNEL AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT TUNE TV CONTROL VOLUME 8 ¢ ST ENTER TUNE ST GUIDE MUTING FUNCTION DTV MENU SETUP FL DIMMER LOUDNESS 6 9 TEST TONE SIGNAL SELECT CH LEVEL DSP 2 /DTS CH SELECT 3 3 4 ¡ DTV ON/OFF 7 CLASS ¶ BAND 1 TVC ATT CD-R DISC ENTER RECEIVER D.67 51 01. 6 Press and hold the REMOTE SETUP button for two seconds to exit.1 / 7. 5 Repeat step 4 to erase other buttons. 1 Press REMOTE SETUP and hold for three seconds. REMOTE SETUP and the MULTI CONTROL. To program additional operations for the current component repeat steps 4 and 5. If for some reason the operation hasn’t been learned the LED will blink for three seconds and then light steadily. The LED lights steadily for three seconds and then goes off.). Clearing all the remote control settings • Certain buttons represent operations that cannot be learned from other remote controls. 1 Press REMOTE SETUP and hold for three seconds.1 TV CD 4 7 MULTI CONTROL 1 DVD SOURCE RCV 1 . keep pressing the (teaching) button as you vary the distance between the two remotes. You can clear all presets and restore the factory default settings.12. 51 En XRB3013A. To program operations for another component exit and repeat steps 1 through 5. The LED flashes rapidly. The LED blinks to indicate the remote is ready to erase the button setting. The LED lights steadily for two seconds. 4 Press and hold the button to be erased for three seconds. 3 Prepare the remote to erase the button setting. 09 • TV CONTROL buttons (TV . If the operation has been learned successfully. but in most cases the remotes just need to be moved closer together or farther apart. RECEIVER CONTROL and MASTER VOLUME buttons.).49. etc. for example 1329. 2 Press the MULTI CONTROL button of the component for which you want to check the preset code.) Confirming preset codes Use this feature to check which preset code is assigned to a MULTI CONTROL button. etc. any component you select (using the MULTI CONTROL buttons ) will be selected by both the receiver and the remote control. The LED lights steadily for two seconds.12. use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player. Each digit will be represented by a series of blinks on the remote’s LED—3 blinks to represent the digit “3”. using your receiver to playback a different component. (If the LED blinks three times. then you made a mistake with the code—try re-entering it. 4:49 PM . 52 En XRB3013A. 2 Press the MULTI CONTROL button for the component you want to control.12. then there was a mistake with the code—repeat steps 1-4. (If the LED blinks three times. This could let you. (“0” is represented by 10 blinks) When direct function is on. 3 Press and hold ENTER for two seconds. you can operate the remote control without affecting the receiver. Direct function • Default setting: ON You can use the direct function feature to control one component using the remote control while at the same time. 3 Use the number buttons to enter either 9990 (direct on) or 9995 (direct off).) You can’t use direct function for TV INPUT. 1 Press REMOTE SETUP and hold for three seconds. The LED will light for two seconds to indicate that it’s been correctly set.49. Each preset code consists of four digits. The LED lights for two seconds to indicate that the settings have been restored to the factory presets. 1 Press REMOTE SETUP and hold for three seconds.09 Controlling the rest of your system 2 Press any MULTI CONTROL button then use the number buttons to enter 0123. The LED lights steadily for two seconds.67 52 01. for example. When you turn direct function off. DTV 4 Switches DTV on or off.12.) TV CHANNEL +/– Selects channels. DTV ANGLE Use to choose the YELLOW commands on a DTV menu.12. Button (s) TV Function Components Switches the DTV on or off. DTV TOP MENU Use to choose the BLUE commands on a DTV menu. Cable TV/Satellite TV/TV/ DTV SOURCE Press to switch the component assigned to the TVC button on or off. Cable TV/Satellite TV/TV/ DTV +10 button Use to add a decimal point when selecting a specific TV channel. Use the MULTI CONTROL buttons to select the component. 53 En XRB3013A. Cable TV/Satellite TV/TV TV INPUT Switches the TV input. DTV 8 Use as the GUIDE button for navigating DTV ¶ Press to get information on DTV programs.Controlling the rest of your system 09 Controls for TVs This remote control can control components after entering the proper codes or teaching the receiver the commands (see pages 56–67). DTV Switches the TV or CATV between standby and on. Cable TV/TV 3 Use to switch DTV audio tracks DTV 7 Use to select closed captioning with DTV. DTV SUB TITLE Use to choose the RED commands on a DTV menu. (Not possible with all models.49. DTV ¢ Press to display the DTV menu. Cable TV/Satellite TV/TV/ DTV TV VOL +/– Adjust the TV volume. DTV Number Buttons Use to select a specific TV channel. DTV AUDIO Use to choose the GREEN commands on a DTV menu. TV 1 Use to clear a TV channel selected using the number buttons. 4:49 PM . DTV ¡ Selects between screen formats for widescreen TVs. DTV ENTER/ DISPLAY/ DISC Cable TV/Satellite TV/TV Use to enter a channel.67 53 01. Cassette deck 8 Pause playback or recording. CD/MD/CD-R/VCR/DVD/LD/ DVR player/Cassette deck 4 Press to return to the start of the current track.09 Controlling the rest of your system Button (s) MENU Function Components Select different menus from the DTV functions. CD/MD/CD-R/VCR/DVD/LD/ DVR player/Cassette deck 3 Start playback. Cable TV/Satellite TV/TV }]’‘ & Select or adjust and navigate items on the menu screen.12. Controls for other components This remote control can control these components after entering the proper codes or teaching the receiver the commands (see pages 56–67). Repeated presses skips to the start of previous tracks. CD/MD/CD-R/VCR/DVD/LD/ DVR player/Cassette deck 54 En XRB3013A. ENTER ENTER brings up the DTV menus. Cassette deck Press to advance to the start of the next track. DTV Press to select or adjust and navigate items on the menu screen. For satellite DTV TV use this button to exit the menu screen. Button (s) Function Components SOURCE Press to switch the component between standby and on. CD/MD/CD-R/DVD/LD player Go back channels (channel –). VCR ¢ Play the forward side of the tape on a reversible deck. Thus if you only have one TV to hook up to this system assign it to the TVC MULTI CONTROL button.67 54 01. The four TV CONTROL buttons on the remote control are dedicated to control the TV assigned to the TVC button.49. Repeated presses skips to the start of following tracks. VCR/DVR Play the reverse side of the tape on a reversible deck. EFFECT +/– Cable TV/Satellite TV/TV/ DTV For TV and cable TV use this button to immediately enter Cable TV/Satellite TV/TV/ a new channel (CHANNEL ENTER function). CD/MD/CD-R/LD player Go forward channels (channel +). assign the main TV to the TVC button. If you have two TVs.12. Use the MULTI CONTROL buttons to select the component. 5:24 PM . DTV Select the menu screen. CD-R/Cassette deck }/] Fast rewinds/fast forwards the tape. CD/MD/CD-R/VCR/LD player Use the number buttons to navigate the on-screen display. CD/MD/CD-R/VCR/DVD/LD/ DVR player/Cassette deck ¶ Starts recording. (For example.49. pressing this when the disc is already stopped will cause the disc tray to open). ENTER DVD/DVR Player CHANNEL Selects channels. CD-R/Cassette deck ‘ Stops the tape. CD-R/Cassette deck ENTER Starts playback. DVD/DVR player ’ Pauses the tape. DVD/DVR player +10 button Selects tracks higher than 10. (DISPLAY/ Ejects the disc.) CD/MD/CD-R/VCR/LD player ENTER Multiple CD player Chooses the disc. CD-R/Cassette deck }]’‘ & Navigates DVD menu/options. DVD/DVR Player 55 En XRB3013A. VCR/DVD/DVR Player +/– CD/MD/CD-R/Cassette deck Selects tracks. DVD/DVR Player ANGLE Switches camera angles on discs with multi-angle scenes. CD/MD/CD-R/VCR/DVD/LD/ DVR player/Cassette deck 1 Hold down for fast reverse playback.12. DVD/DVR player Changes sides of the LD.67 55 01. press +10 then 3 to select track 13. MD player DISC) Use as the ENTER button. this button must be pressed twice to take effect (the second press must be within 10 seconds of the first). 4:49 PM . DVD/DVR Player AUDIO Changes the audio language or channel. LD player MENU Displays menus concerning the current DVD or DVR you are using. DVD/DVR Player SUBTITLE Displays/changes the subtitles on multilingual DVDs. TOP MENU Displays the disc ‘top’ menu of a DVD.12. CD/MD/CD-R/VCR/DVD/LD/ DVR player/Cassette deck 7 Stops playback (on some models. To prevent accidental recording. VCR Displays the setup screen for DVD/DVR players. VCR/DVR player Number buttons Directly access tracks on a program source.Controlling the rest of your system Button (s) Function 09 Components ¡ Hold down for fast forward playback. 1074 1080. 1115 1001. 1050. 1105 1006. 1092 1066. 1017. 1076. 1073 1116 1006. 1050. 1070. 1099. 1063. 1019. 1118 1036. 1055. 1046. 1056. 1054. 1103. 1017. 1034. 1050 1017 1079 1080 1090 1086 1079 1090 1095 1064 1046. 1087.12. 1064. 1079 1040 1013. 1087. 1011. 1016. 1042. 1067. 1079. 1075. 1028. 1121. 1103 1095 1004. 1020. 1115 1008. 1053. 1108 1061 1064 AMPLIVISION AMPRO AMSTRAD ANITECH AOC ARCAM ASBERG ASUKA ATLANTIC AUDIOSONIC AUDIOVOX AUTOVOX BANG & OLUFSEN BASIC LINE BAYSONIC BAUR BEKO BELCOR BELL & HOWELL BEON BINATONE BLUE SKY BLUE STAR BONDSTEC BOOTS BPL BSR BRADFORD BRANDT BRITANNIA BROCKWOOD BROKSONIC BTC BUSH CANDLE CARNIVALE CARREFOUR CARVER CASCADE CATHAY CENTURY CENTURION CELEBRITY CCE CGE CIMLINE 1079 1126 1006. 1066. 1080 1064 1007. 1092. 1013. 1029.67 56 01. 1098. 1046 1040. 1103. 1039. 1019. 1017. 1062. 1118. 1046. 1026. 1011. 1052. 1071. 1051. 1085 1005.09 Controlling the rest of your system Preset Code List You can only set these codes for the buttons that assigned to the respective components. 1078 1006. 1013 1078. 1091 1011. 1017. 1114 1002. 1007. 1041. 1122 1006. 1017. 1097 1016. 1058 1006 1017 1075 1017 1001 1017 1034. 1112 1080 1006. 1075. 1006. 1017. 1089 1006 1063. 1086. 1075. 1082. 1124 1015. 1062. 1104. TV Manufacturer PHILIPS SONY PANASONIC TOSHIBA TELEFUNKEN SHARP SAMSUNG FERGUSON MITSUBISHI GOLDSTAR BLAUPUNKT RADIOLA JVC DAEWOO ORION SIEMENS ADMIRAL ADYSON AIKO AKAI AKURA ACURA ALARON ALBA ALLORGAN ANAM 56 ANAM NATIONAL AMBASSADOR AMERICA ACTION TV TVC Code 1008. 1114. 4:49 PM . 1036. 1095. 1011. 1095. 1065. 1104 1013. 1080. 1079 1036 1080 1073 1017. 1026. 1064. 1019. 1075. 1115 1041. 1072 1078 1011 1083. 1054. 1029. 1033. 1055. 1108 1054. 1068. 1110 . So. 1040. 1104. 1090. 1045. 1024. 1115 1102 1011 1009. 1119 1017. 1075. 1062. 1102 1005. 1016 1023. 1036 1011. for example. 1089. 1083. 1038. 1017. 1046. 1038. 1112 1014. 1068.12. 1087. 1049. 1097 1006 En XRB3013A. 1065. 1025. 1031. 1017. 1026 1013 1016 1025. 1103. 1027. 1013. 1084. 1071. 1079. 1016. 1124 1006. 1041. 1017 1016. 1030. 1080. 1026. 1027. 1016. 1017.49. 1069. 1112 1017. 1110. 1016. the TV codes can only be set to the TV or TVC button. 1090. 1102 FLINT 1111 FORMENTI 1017. 1118. 1018. 1044 FISHER 1050. 1080 DANSAI 1017 DAYTRON 1006. 1013. 1083. 1064. 1011. 1079. 1072. 1109 1032. 1063. 1064. 1019. 1080 GIBRALTER 1010. 1017. 1018. 1104 GORENJE 1102 GPM 1080 GRAETZ 1055 GRANADA 1017. 1131 CYBERTRON 1080 CXC 1064 DAINICHI 1077. 1098 HARLEY DAVIDSON 1063 HARVARD 1029. 1129. 1068. 1062. 1064. 1131 GEC 1017. 1048. 4:49 PM . 1036.12. 1055. 1110. 1062. 1090 ICE 1079. 1031 DWIN 1125. 1038. 1097 HUANYU 1078. 1086. 1120 EXPERT 1073 FIDELITY 1078 FINLANDIA 1074 FINLUX 1017. 1075 GENEXXA 1055. 1127 ECE 1017 ELBE 1088 ELECTROBAND 1001 ELIN 1017 ELITE 1080. 1032 . 1075. 1011. 1090. 1078 CONTINENTAL EDISON 1069. 1075 CROWN 1006. 1112. 1063. 1110 CITIZEN 1013. 1089 ISUKAI 1080 ITS 1103 ITT 1055 57 En XRB3013A. 1043 1079. 1017. 1017. 1096. 1055. 1073 1059. 1111 HITACHI 1014. 1017 DUAL TEC 1079 DUMONT 1010. 1031. 1019. 1086. 1050. 1022. 1036. 1102 CONTEC 1006. 1114 INTERVISION 1017. 1103 ICES 1080 IMPERIAL 1034. 1064 HALLMARK 1062 HANSEATIC 1017. 1106 CRYSTAL 1109 CS ELECTRONICS 1078 CTC 1086 CURTIS MATHES 1009. 1011 DECCA 1017. 1113. 1079. 1100 GRADIENTE 1024. 1086. 1040 CLARIVOX 1017 CLATRONIC 1036. 1096 FUTURETECH 1064 GE 1012. 1090. 1080 HISAWA 1090. 1057. 1064 HARMAN/KARDON 1025 HCM 1006. 1089. 1104 HYPSON 1017. 1064. 1069. 1044.67 57 01. 1041. 1102. 1017 ETRON 1006. 1105 HINARI 1006. 1015. 1102. 1026. 1110. 1025. 1016. 1066. 1047. 1021.49. 1086. 1075. 1027. 1016. 1032. 1032. 1079 GELOSO 1006. 1095. 1026. 1114 CONCERTO 1026 CONDOR 1098. 1089. 1079. 1022. 1041. 1020. 1026. 1020. 1023. 1070. 1029. 1074. 1089. 1038. 1023. 1089. 1103. 1115 GRUNPY 1063. 1070. 1046. 1129. 1050. 1063. 1106 INDIANA 1017 INFINITY 1025 INGELEN 1055 INNO HIT 1032 INNOVA 1017 INTEQ 1010 INTERBUY 1029 INTERFUNK 1017.12. 1032 DE GRAAF 1074 DENON 1047 DIXI 1006. 1079. 1098 FORTRESS 1041 09 FRONTECH FUJITSU FUNAI 1055. 1032. 1081. 1058 GRANDIN 1090 GRUNDIG 1031. 1047. 1119 ENVISION 1013 ERRES 1008. 1074. 1072 CRAIG 1054 CROSLEY 1025. 1098 ELTA 1006 EMERSON 1011. 1019. 1027. 1016. 1036. 1034. 1102 CME 1007. 1019. 1013 GOODMANS 1016. 1061. 1072.Controlling the rest of your system CINERAL 1040. 1026. 1015. 1075. 1094 1036 1041 1011. 1066. 1031. 1078 NAD NEC NECKERMANN NEI NETSAT NICAMAGIC NIKKAI NIKKO NOBLIKO NORDMENDE NTC OCEANIC ONWA OPTIMUS OPTONICA OSAKI OSO OSUME OTTO OTTO VERSAND PALLADIUM PANAMA PATHE MARCONI PATHE CINEMA PAUSA PENNEY PERDIO PHAPSODY PHASE PHILCO PHONOLA PILOT PORTLAND PRISM PROFEX PROLINE PROSOCAN PROTECH PROTON PULSAR PYE QUASAR QUELLE QUESTA R-LINE 1051. 1078. 1032. 1077 1064 1050. 1098 1006 1003. 1032. 1017. 1109 1062. 1113 1010.12. 1032. 1079. 1131 1098 1078 1014 1011. 1078. 1080. 1017. 1062 1006. 1027. 1109 1017 1078 1014. 1049. 1114 1009 1073 1026 1022. 1016. 1056 1014. 1062 1010.67 58 01. 1091 1040 1055.12.49. 1051. 1072 1075. 1070. 1086 1036. 1013. 1075. 1075. 1036. 1026. 1040 1023 1006. 1049. 1095. 1103 1087 1020 1008. 1064. 1063 1043. 1078. 1087. 1038. 1026. 1105 1080 1014. 1115 1016 1017 En XRB3013A. 1038. 1026. 1016. 1075. 1079. 1062. 1011. 1089. 1016. 1052 1007. 1093. 1106 1079. 1071. 1080. 1095 1026 1017 1014 1035. 1062 1011. 1019. 1078 1055. 1013 1078 1114 1017 1006 1013. 1025 1017 1006. 1079. 1025. 1025. 1106. 1019. 1050. 1073 1078 1064 1017 1088 1011. 1047. 1051. 1016. 1089. 1064 1017. 1112 1075 1011. 1092. 1019. 1115 1105 1012 1078. 1032. 1019 1011. 1098 1013. 1040. 1022. 1027. 1057. 1017. 1023 1031. 1115 1017. 1079. 1034. 1089 1069. 1091. 1087 1007. 1019. 1074. 1114. 1062. 1043. 1037 1099 1022 1006. 1013. 1080. 1078. 1057. 1017 1047.09 Controlling the rest of your system JBL JCB KAISUI KAMP KAPSCH KAWASHO KEC KENDO KNEISSEL KENWOOD KINGSLEY KONIG KORPEL KOYODA KTV LEYCO LG LIESENK&TTER LLOYTRON LOEWE LOGIK LUMA LUXMAN LXI M ELECTRONIC MAGNAVOX MAGNADYNE MAGNAFON MAJESTIC MANESTH MARANTZ MARK MATSUI MATSUSHITA MCMICHAEL MEDIATOR MEGATRON MEMOREX METZ MGA MIDLAND MINERVA MINOKA MINUTZ MIVAR MOTION MOTOROLA MTC 58 MULTITECH 1025 1001 1006. 1062 1006. 1058 1017. 1017. 1025. 1044. 1023. 1079. 1104 1013. 4:49 PM . 1009. 1017 1011. 1062 1036. 1015. 1112 1008. 1098. 1032. 1114 1007. 1017. 1013. 1087 1041. 1017. 1075 1009 1079. 1022. 1115 1102. 1043. 1034. 1084. 1011 1008 1023. 1029. 1066. 1070. 1114 1006. 1097. 1089. 1056. 1086. 1013. 1069. 1012. 1043. 1075. 1043 1046. 1026. 1055. 1090. 1017. 1089 1013. 1079. 1089. 1036. 1013. 1013. 1086. 1050. 1046. 1075. 1026. 1091 1084 1006. 1095 1007 1055. 1062 VISION 1098 VOXSON 1055 WALTHAM 1079 WATSON 1017. 1073. 1089. 1086 1098 1023. 1020. 1038. 1089. 1046. 1067. 1106 1059 1006. 1075. 1117 1035.49. 1098 WATT RADIO 1043 WARDS 1009. 1098 TEXET 1078. 1080 THOMSON 1046. 1025. 1017 1055. 1087 VIDEOSAT 1086 VIDEOTECHNIC 1079 VIDIKRON 1025 VIDTECH 1011. 1050. 1102 VECTOR RESEARCH 1013 VESTEL 1017 VICTOR 1016. 1130. 1019 1019 1078 1110 1112 1016. 1129. 1128. 1041. 1083 1022. 1059. 1062. 1072. 1098 ULTRA 1067 ULTRAVOX 1043 UNIVERSUM 1017. 1088 1064 1051 1015 1011 1095 1011. 1056. 1019. 1089 1043. 1080 1064 1055. 1131. 1016. 1079 1079. 1072. 1036. 1063 1016. 1070. 1069. 1064 59 09 SOUNDWAVE SQUAREVIEW STANDARD STARLITE STERN SUNKAI SUPERTECH SUPREME SUSUMU SYLVANIA SYMPHONIC SYSLINE TANDY TASHIKO TEC TECHNEMA TECHNICS TECHNOL ACE TECHWOOD TEKNIKA 1017. 1040. 1100 1008. 1074. 1019. 1096. 1017. 1069. 1079. 1073. 1011. 1063. 1048. 1075 1013. 1056. 1017. 1055. 1044. 1114 TMK 1026. 1026. 1061. 1032. 1074. 1089. 1064. 1050. 1086. 1080 1016. 4:49 PM 59 En . 1088 1095. 1011. 1026 1009. 1075 1043. 1121 1063 1023.12. 1026. 1034. 1080. 1049. 1052. 1039. 1132 1011. 1053. 1055. 1018. 1032. 1032. 1055 1074 1006. 1096. 1063 WEGA 1016 01. 1023. 1099 1078 1001 1080 1013. 1043. 1087. 1025 1059 1017 1032. 1079. 1050. 1062 TOMASHI 1090 TOTEVISION 1019 TRIUMPH 1085 TUTUNG 1017. 1063.12. 1079. 1024. 1075. 1013.Controlling the rest of your system RANK ARENA RBM RCA REALISTIC REX REVOX ROADSTAR RUNCO SABA SACCS SAISHO SALORA SAMBERS SAMPO SAMSUX SANDRA SANSEI SANSUI SANYO SBR SCHNEIDER SCIMITSU SCOTCH SCOTT SEARS SEG SEI SEI-SINUDYNE SELECO SEMIVOX SEMP SENTRA SHOGUN SHORAI SSS SIAREM SINDYNE SIGNATURE SILVER SKY SKY-WORTH SOLAVOX SONITRON SONOKO SONOLOR SONTEC SOUNDESIGN XRB3013A. 1013. 1073. 1075. 1025. 1025. 1077 1017 1062. 1041. 1026. 1063. 1065. 1073. 1062. 1095. 1013. 1064 TELEAVIA 1072 TELEMEISTER 1098 TELETECH 1006 TELETON 1016. 1095 1009 1016 1017 1017 1014. 1012. 1079 TENSAI 1080. 1064 1043. 1079 UHER 1073. 1103 1011 1062 1011. 1109 1055 1036. 1088. 1089 1017 1006. 1062. 1091 THORN 1015.67 1016 1031 1011. 1020 1017. 1051. 1022. 1062. 1027. 1106 1010. 1064 1055. 1070. 1080. 1123. 5054 FANTASIA 5051 FISHER 5024. 5025. 5207. 5062 KRELL 5021 LINN 5021 LUXMAN 5036 LXI 5038 MAGNAVOX 5021.12.49. 5026 MATSUI 5021 MCS 5004 MEMOREX 5022 MERIDIAN 5021 MICROMEGA 5021 MISSION 5021 MITSUBISHI 5014. 5051 NSM 5021 En XRB3013A. 5057.5202. 1112. 1046. 5026. 5040. 5041. 5025 GARRARD 5044. 5020. 5020 MTC 5045 NAD 5001 NAIM 5021 NIKKO 5024. 5008. 1118. 5017. 1057.5407 5403 5404 5406 5405 5408 LD PLAYER Manufacturer AKAI BBK CYRUS DENON DISCO VISION FUNAI HITACHI HONG DENG IDALL KEBAO MARANTZ MITSUBISHI NAD PANASONIC PHILIPS RADIOLA ROWA SALORA SEGA SHARP SHINCO SMC SONY SUPER TELEFUNKEN TOSHIBA PIONEER DVD Code 5222 5224 5207 5202 5201 5217 5201 5213 5219 5215 5203.67 60 CD-R 01. 1079. 5205 5202 5202 5210 5203. 1107. 5206. 5032 ANAM 5041 ARCAM 5021 AUDIOLAB 5021 AUDIOMECA 5021 AUDIO TON 5021 BESTAR 5022 BURMESTER 5045 CALIFORNIA AUDIO LABS 5004 CARVER 5021. 5046 JVC 5011 KENWOOD 5003. 5046 CONDOR 5018.09 Controlling the rest of your system WHITE WESTINGHOUSE 1017. 5208 5214 60 CD CD PLAYER CD Manufacturer Code AIWA 5016. 1091. 5022 CURTIS MATHES 5004 CYRUS 5021 DENON 5002. 1055. 1112 PIONEER 1018. 1078. 5060 DKK 5001 DUAL 5031 DYNAMIC BASS 5025 EMERSON 5038 EROICA 5053. 5021 AKAI 5014. 5006. 5216 5218 5215 5202 5223 5201. 5056.12. 5023 HITACHI 5005 INKEL 5015. 1119 YAMAHA 1011. 5021. 5045 GENEXXA 5005. 5209 5207 5212 5203 5201 5221 5211 5220 5204. 1060. 5051 GRUNDIG 5021 HARMAN/KARDON 5021. 1040. 1124 MD PLAYER Manufacturer SONY KENWOOD SHARP ONKYO ORION DENON PIONEER CD-R Code 5401 5402. 1109 ZANUSSI 1073 ZENITH 1009. 1010. 1098. 4:49 PM . 5038 MARANTZ 5004. 1101. 5029. 1013 YOKO 1017. 5009. 5038 GOLDSTAR 5043. 5025. 5046. 5030. 5019. 5005. 5058 5015. 6007. 6024. 5031 5001. 5026. 5010. 5033. 6008. 6019. 6022. 5318 5313 5316 5314 61 En XRB3013A. 6019 6001. 5013. 6009 6021. 5038. 5045 5004.67 61 01. 5055 5022 5022 5021 5021 5021 5004. 5322 5307 5311. 5026. 5063 TAPE DECK Manufacturer ADC AIWA AKAI ANAM ARCAM CARVER DENON DUAL CD-R Code 6013 6002. 6026. 6016 6035 6005 6002. 5045. 6033 6038 6023 6002 6027. 6018 6015. 5048. 5021 5005. 5050 5019 5045 5024. 6031 6003.Controlling the rest of your system ONKYO OPTIMUS ORION PANASONIC PARASOUND PHILIPS PMG POPPY PROTON QED QUAD QUASAR RCA REALISTIC REVOX ROTEL SAE SANSUI SANYO SCHNEIDER SCOTT SEARS SHARP SHERWOOD SONY SOUDESIGN TASCAM TEAC TECHNICS THORENS TOSHIBA UNIVERSUM YAMAHA YORX VICTOR WARDS PIONEER 5012. 5025. 6030 6001 6006. 5038.12. 5052. 5048 5061 5004. 5035. 6021 6023 6002 6028 6040 6002 6038 6002 6028 6019 6036 6012. 5038 5025. 6030. 4:49 PM . 5027. 5042. 6011. 5059 5001. 5028 5047 5011 5010. 6014 6003 6027. 5044. 5008. 6025 6013 6034 6029 6002 6002 6008. 5026. 6009 6016 6020 6035 6029 6010. 6032 6001.12. DVD PLAYER Manufacturer TOSHIBA SONY PANASONIC KENWOOD JVC SAMSUNG AKAI HARMAN/KARDON DVD Code 5302 5306 5301. 6017. 6039 6037 CD 09 DYNAMIC BASS EROICA FISHER GARRARD GOLDSTAR GRUNDIG HARMON/KARDON INKEL JVC KENWOOD KYOCERA LOTTE LUXMAN MAGNAVOX MARANTZ MEMOREX MITSUBISHI NAKAMICHI NIKKO OLYMPUS ONKYO OPTIMUS PANASONIC PHILIPS RCA RENAISSANCE REVOX SAMSUNG SANSUI SANYO SHARP SONIC SONY TEAC TECHNICS THORENS VICTOR WARDS YAMAHA PIONEER 6028 6041 6028 6036 6036 6002 6002. 5026. 5045 5021 5021. 5038 5025. 5039 5018 5038 5038 5008.49. 5037 5021 5049 5021 5007. 6004. 5034. 5045 5021 5021. 5037 5045 5021. 6028 6005. 7046 7017.12. 7059 7009.09 Controlling the rest of your system MAGNAVOX MITSUBISHI ONKYO PROSCAN RCA SHARP THETA DIGITAL TECHNICS THOMSON YAMAHA PHILIPS ZENITH PIONEER 5302 5303 5302. 7058 7040 PHONOTREND QUASAR RCA RENAISSANCE REVOX ROADSTAR SABA SAISHO SAMSUNG SANSUI SANYO SCHNEIDER SHARP SHERWOOD SOUNDESIGN SONY TAE KWANG TEAC TECHNICS TELEFUNKEN THORENS 7005 7037 7042 7059 7028 7032. 7062. 7055. 7040 7009 7007. 7036. 7062. 7044. 7045. 7042 7043 7018 7027 7042 7027 7010 7027. 7052 7013. 7031. 5312. 7035 7004. 5308 5302. 7048 7059 7042 7055. 7029 7050 7004. 5317. 7056. 7059 7008 7032 7001. 7059 7020 7004 7037 7018. 7041. 7017. 7055 7028 7042 7017 7038 7049 7015. 7051. 7025. 5309 5302. 7051 7038. 5315 5305. 7024. 7059 7004. 7041 7018. 7059 7032. 7066 7037. 5321 5322 AMPLIFIER Manufacturer AUDIOLAB DENON GRUNDIG MARANTZ MICROMEGA PHILIPS PIONEER REVOX TANDBERG THORENS YAMAHA EROICA FANTASIA FERGUSON FINE ARTS FISHER GARRARD GOLDSTAR GOODMANS GP AUDIO GRUNDIG HARMAN/KARDON INKEL JBL JVC KENWOOD TUN LOTTE LUXMAN MAGNAVOX MARANTZ MCINTOSH MCS MCSILVER MICROMEGE NIKKO OPTIMUS ONKYO PALLADIUM PANASONIC PHILIPS Code 8005 8002 8005 8005 8005 8005 8004 8005 8003 8005 8001. 8006 MISC AUDIO TUN Manufacturer Code JERROLD 8201. 7027 7010. 7039 7021 7030. 7048. 7042 7003. 7063. 4:49 PM . 7037. 7042. 7057. 7046 7018. 7026. 7030.12. 7054. 7018. 7034. 7059 En XRB3013A. 5319 5304 5304 5320 5312 5301 5310 5301. 7042. 7061.49. 7065 7018.67 62 01. 7065 7019. 7055. 7053. 7059 7038 7004 7006. 7060 7034 7010. 7034. 7055. 8203 STARCOM 8201 SCIENTIFIC ATLANTA 8202 62 RECEIVERS TUN Manufacturer ADC AIWA AKAI ANAM ARCAM AUDIOLAB CAPETRONIC CARVER CURTIS DAEWOO DENON DUAL Code 7042 7012. 7024. 7064 7011. 7023. 7049. 7035 7010 7027 7033 7018. 7055. 2024. 2046. 2060. 2015 2008. 2023. 2017.12. 2046. 2041. 2035. 2037 FRONTECH 2011 FUJI 2015 63 En XRB3013A. 2072 2011 2059 2015 2001. 2052 FISHER 2025. 2063. 2042. 2021. 2064. 2070. 2038. 2042. 2078 2025. 2050. 2056. 2070. 2034. 2035. 7022. 2057 2021. 2059. 2035. 2021. 2042 CYBERNEX 2057 CYRUS 2035 DAEWOO 2011. 2049. 2062. 2029. 2072 2034 2011. 2074. 2074 2001. 7047. 2059. 2054.49. 2074. 2022. 2010. 2039. 2005. 2055. 7014. 2040. 2083 ESC 2057. 2057 2027. 2040. 2037 FINLUX 2001. 2014. 2054. 2059. 2052. 2034. 2068 2017. 2075 2021.Controlling the rest of your system UHER VICTOR WARDS YAMAHA PIONEER 7027. 2034. 2087 2034 2017. 2005. 2023. 2052 2001 2059 2001. 2054. 2082. 2064. 2067. 7042. 2052. 7008. 2032. 2059 CLATRONIC 2011 COLT 2034 COMBITECH 2072 CONDOR 2011 CRAIG 2017. 2033.12. 2059 CURTIS MATHES 2015. 2069. 7050 7007 7002. 2087 2021. 2013. 2080 2003. 4:49 PM . 2078. 7017 7002. 2034. 2014. 2007. 2050. 2048. 2048. 2052. 2030. 2027. 2051. 7006. 2075 2015. 2059. 2054. 2074 2023. 2035. 2035. 2045 2027. 2078 BUSH 2034. 2036. 2063 2001. 2023. 2059 FIDELITY 2001 FINLANDIA 2035. 2055. 7042. 2037. 2058 CROWN 2011. 2010. 2004. 2073 2002. 7008 7016. 2039 BASIC LINE 2011. 2004. 2037. 2026. 2035 DE GRAAF 2022. 2025. 2042. 2033. 2065 2003. 2059 CGE 2001 CIMLINE 2034 CINERAL 2059 CITIZEN 2017. 2024. 2037. 2071. 2038. 2021. 2072.67 63 01. 2072 CALIX 2017 CANON 2015 CAPEHART 2011 CARVER 2035 CATRON 2011 CCE 2034. 7052 VCR Manufacturer PHILIPS PANASONIC THOMSON SONY JVC GRUNDIG AKAI HITACHI TOSHIBA MITSUBISHI SHARP ORION SANYO FERGUSON BLAUPUNKT NOKIA ADMIRAL ADVENTURA AIKO AIWA AKIBA ALBA AMBASSADOR AMERICA ACTION AMERICAN HIGH AMSTRAD ANAM ANAM NATIONAL ANITECH ASA ASHA ASUKA AUDIOVOX VCR Code 2015. 2052. 2065 BRANDT ELECTRONIC 2021 BROKSONIC 2002. 2064. 2026. 2052. 2046. 2083 DANSAI 2034 DAYTRON 2011 DECCA 2001. 2034. 2059. 2016. 2057 2021. 2035. 2012. 2059 BEAUMARK 2057 BELL & HOWELL 2037 BRANDT 2047. 2037 DYNATECH 2001 ELBE 2018 ELCATECH 2034 ELECTROHOME 2017 ELECTROPHONIC 2017 EMEREX 2012 EMERSON 2001. 2057. 2034. 2059. 7050. 2024. 2043. 2053. 2017. 2043 DENON 2022 DUAL 2021 DUMONT 2001. 2035 2057 2017 2017 09 BAIRD 2001. 2021. 2057. 2009. 2002. 2026. 2075 2025. 2084 2042. 2037 FIRSTLINE 2017. 2022. 2054. 2017. 2034 OTTO VERSAND 2035 PALLADIUM 2005. 2038 LXI 2017 M ELECTRONIC 2001 MAGNASONIC 2059 MAGNAVOX 2001. 2052 KENWOOD 2018. 2057. 2070 OLYMPUS 2015. 2088 OSAKI 2001. 2033 KLH 2034 KODAK 2015. 2034 MURPHY 2001 NAD 2031 NATIONAL 2054 NEC 2018. 2010. 2059. 2042. 2021. 2027. 2017. 2015. 2074 OCEANIC 2001. 2025. 2088 MEMPHIS 2034 METZ 2003. 2051 LOEWE 2004.12. 2034. 2077. 2057 PERDIO 2001 PHILCO 2015. 2028 GOLDHAND 2034 GOLDSTAR 2017. 2087. 2057 LUXOR 2023. 2037. 2034. 2057 GEC 2035 GENERAL 2011. 2018. 2064. 2057 MGN TECHNOLOGY 2057 MINCRVA 2048 MINERVA 2005. 2020. 2035 HARLEY DAVIDSON 2001 HARWOOD 2034 HCM 2034 HEADQUARTER 2025 HINARI 2004. 2078 PHONOLA 2035 PILOT 2017 PORTLAND 2011 PROFEX 2066 PROFITRONIC 2057 PROLINE 2001 PROSCAN 2032 64 En XRB3013A. 2042. 2081 GRAETZ 2005. 2037. 2057 MULTITECH 2001. 2034 PATHE MARCONI 2021 PATHE CINEMA 2016 PENTAX 2022 PENNY 2015. 2017 KORPEL 2034 LAYCO 2034 LENCO 2059 LG 2079 LLOYD’S 2001. 2048 MINOLTA 2022 MOTOROLA 2015. 2034 MARANTZ 2003. 2087. 2075 GO VIDEO 2077. 2055 MEI 2015 MELECTRONIC 2018 MEMOREX 2001. 2017. 2025.67 64 01. 2008 GRANDIN 2001. 4:49 PM . 2021. 2026. 2037 NECKERMANN 2035 NESCO 2034 NIKKO 2017 NIKON 2014 NOBLEX 2057 NOKIA 2021. 2017. 2038. 2085.09 Controlling the rest of your system FUNAI 2001 GARRARD 2001 GE 2015. 2018.49. 2062. 2079 GOODMANS 2001. 2038. 2019. 2017. 2035 MARTA 2017 MATSUI 2004. 2027 MTC 2001. 2027. 2057 NORDMENDE 2021. 2027. 2072 MATSUSHITA 2015. 2057 GRANADA 2025. 2021 OKANO 2063. 2065. 2086. 2052. 2015. 2037. 2017. 2048. 2022. 2057. 2061. 2025. 2053. 2019. 2052. 2021. 2037. 2005. 2052. 2035 MAGNIN 2057 MANESTH 2024. 2016. 2032. 2059 KENDO 2038. 2070. 2020. 2017. 2036. 2037. 2015. 2021. 2042. 2034 HANSEATIC 2017 HARMAN/KARDON 2018. 2018. 2069 MGA 2023.12. 2057. 2037 GRADIENTE 2001. 2033. 2072 HI-Q 2026 HUGHES NETWORK SYSTEMS 2022 HYPSON 2034 IMPERIAL 2001 INGERSOL 2004 INTERFUNK 2035 ITT 2005. 2035. 2037. 2031. 2021. 2055. 2035 LOGIK 2004. 2025. 2027. 2034. 2017. 2054 OPTIMUS 2017. 2005. 2074 ITV 2017. 2005. 2059 JENSEN 2021 KAISUI 2034 KEC 2017. 2066 2004. 2017. 2026. 2024 VIDEOSONIC 2057 WARDS 2001. 2054 2001. 2024. 2017. 4038. 2007. 2057 2001. 2058. 2027 2001. 2087 2035 2001. 2042. 2021 2011 2015. 2044. 2057. 2020 VICTOR 2008. 2026. 4019. 2057 2017. 2052. 2015. 2015.12. 2048. 2078 2024. 2021. 2035. 2065. 2037 2057. 2017. 2050. 2052. 4025. 2035 SILVA SINGER SINUDYNE SOLAVOX SONOLOR SONTEC STS SUNKAI 2034 2019 2035 2025 2025 2015. 2006. 2058. 2017. 2036. 2037 2021. 2061. 2037 2057 2004 2003. 4037. 2074 2034 2001. 2025. 2038. 2052 2023. 4039. 2023. 2035.12. 2064. 2074 2004. 2005. 2038 2019. 2034 2004. 2022. 2064. 2025. 2035 2001. 2034. 2035 2021 2024 2011 2034. 2021. 2005. 2015. 2032. 2010 2037. 2077 2072 2035 2001. 2035. 2027. 2074 2075 2014 2017. 4042 4013.Controlling the rest of your system PROTEC PULSAR PYE QUARTER QUARTZ QUASAR QUELLE RADIO SHACK RADIOLA RADIX RANDEX RCA REALISTIC REX RFT RICOH ROADSTAR RUNCO SABA SAISHO SALORA SANKY SANSUI SAMSUNG SAVILLE SBR SCHAUB LORENZ SCHNEIDER SCOTT SEARS SEG SEI SELECO SEMP SENTRA SHINTOM SHOGUN SHORAI SIEMENS 2017. 2021. 2057. 2022. 2037 2051. 2033. 2019. 2034. 2066 2001 2016. 2059 XR-1000 2001 XR-1001 2015 XR-1002 2034 YAMAHA 2018 YAMISHI 2034 YOKAN 2034 YOKO 2011. 2028 2021 2021. 2015. 2030. 2027. 2057.67 65 01. 2046 2001. 2016. 2034. 2033 VIDEO CONCEPTS 2020. 4030. 2025. 2027. 2049. 4:49 PM . 2047. 2056 SATELLITE TUNER Manufacturer ABSAT AST ALBA ALDES AMSTRAD ANKARO ANTTRON TV TVC Code 4006 4027 4029. 2026. 2078 PIONEER 2031. 2035 2023. 2048 2017 2024. 2021.49. 4034 65 En XRB3013A. 2057 ZENITH 2001. 2042. 4044 4009. 2021. 2059 2019 2021. 2085 2035 2017 2017 2015. 2035 2011 2025 2017 2022 2070 09 SUNSTAR SUNTRONIC SYLVANIA SYMHONIC TASHIKO TATUNG TEAC TEC TECHNICS TEKNIKA TELEAVIA TELEFUNKEN TENOSAL TENSAI THOMAS THORN TMK TOTEVISION TOWADA UHER UNITECH UNIVERSUM 2001 2001 2001. 2022. 2010. 2057 2066 2057 2057 2001. 4034. 4052 4019 4003. 2033. 2067 VECTOR 2024 VECTOR RESEARCH 2018. 2040. 2037 2001. 4016. 2015. 2076. 2038. 2057 WHITE WESTINGHOUSE 2052. 2014. 2032. 2035 2001 2001 2001. 4043 BRAIN WAVE 4022 BRITISH SKY BROADCASTING 4058 BUSH 4002 CNT 4045 CAMBRIDGE 4024 CANAL SATELLITE 4059 CANAL+ 4059 CHANNEL MASTER 4029 COMLINK 4019 CONNEXIONS 4031 CROWN 4015 CYRUS 4011 D-BOX 4054 DDC 4029 DNT 4011. 4046 BT 4053 BEKO 4010 BEST 4030 BLAUPUNKT 4008 BOCA 4015.12. 4064 4011. 4049 4037. 4010. 4037. 4059 4061 4037 4019 4029. 4020. 4019.67 66 01. 4045 AVALON 4031 AXIS 4030. 4041 KREISELMEYER KYOSTAR LA SAT LENCO LENNOX LUPUS LUXOR MANHATTAN MARANTZ MASPRO MATSUI MEDIASAT MEDIAMARKT MINERVA MORGAN’S NAVEX NEUHAUS NEUSAT NEWHAUS NIKKO NOKIA NORDMENDE ORBITECH OXFORD PACE PALLADIUM PALSAT PANDA PHILIPS PHONOTREND PIONEER PLANET PROMAX PROSAT QUADRAL RADIOLA RADIX RFT SAT SABA SABRE SAGEM SALORA SATCOM SATEC SATMASTER SATPARTNER SCHWAIGER SEEMANN 4008 4034 4043.49.09 66 Controlling the rest of your system ARMSTRONG 4015 ASTRA 4005 ASTRO 4008. 4032. 4039. 4031 ECHOSTAR 4031. 4014. 4040. 4054. 4045 4034 4050 4030 4005. 4050 4011 4004. 4019 4027. 4045 4037 4056 4005 4026. 4048 HINARI 4009 HIRSCHMANN 4008. 4013. 4040. 4024. 4049 HITACHI 4037 HOUSTON 4053 HUTH 4013. 4035. 4048. 4045 4009. 4059 4019. 4049. 4045. 4006. 4055.12. 4031. 4037 FRACARRO 4061 FREECOM 4034 FUBE 4030. 4023 FIDELITY 4016 FINLUX 4005. 4023. 4048 4059 4015 4048 4015. 4034 G-SAT 4009 GALAXIS 4019. 4046 En XRB3013A. 4011. 4061 EMANON 4034 FTE HUMAX 4060 FERGUSON 4002. 4039. 4011. 4:49 PM . 4041 4031. 4008. 4034. 4010. 4058 4048 4039 4037 4007. 4023 4024. 4057. 4037. 4051 4009 4026 4022. 4037. 4050 4021. 4032. 4032. 4036. 4009. 4009. 4060 GENERAL INSTRUMENT 4012 GOLD BOX 4059 GOODING 4048 GOODMANS 4010 GRUNDIG 4008. 4038 4023. 4043 4022 4039 4057 4013 4028 4005. 4026 ITT 4005 INVIDEO 4061 INTERVISION 4050 JVC 4048 JOHANSSON 4022 KATHREIN 4004. 4044 4011 4031. 4063 4029 4039 4024 4002. 4015. 4065 4065 4033. 3021 SEAWOO 3045 STARCOM 3002. 3007. 3006. 3049 SCIENTIFIC ATLANTA 3003. 3013 3001 3001 LG ALPS MEMOREX MNET NOW OAK PACIFIC PANASONIC PARAGON PULSAR PVP STEREO VISUAL MATRIX 3002 PIONEER 3010. 4034 4008 4019. 3028 3041 3009 3039 3001. 4037 4001. 3008. 3019. 3046 3044 3001 3009. 4037 4006. 3012 CABLETIME 3016. 3048 TOSHIBA 3001 UNITED CABLE 3002 VIDEOWAY 3017 VISICABLE+ 3033 WESTMINSTER 3012 WOLSEY GENE 3037 ZENITH 3001.12. 4053 4027 4040 4022 4008. 4044. 4052 4051 4037. 4039 4026 4034 4015. 3031. 3004. 4049 4011 4034 4027 4022 4008. 3025. 4059 4026. 3004. 3036 QUASAR 3001 RADIO SHACK 3007 REMBRANDT 3004 RUNCO 3001 SAMSUNG 3014.67 67 01. 3034 67 En XRB3013A.12. 3018. 3005. 4027. 3014. 3006. 3029 CONTEC 3009 CLYDE 3011 CRYPTOVISION 3038 DAEHAN 3043 DAERYUNG 3003 DECSAT 3027 EVERQUESST 3007 FILMNET 3028 FRANCE TELECOM 3030 GEC 3011 GEMINI 3007 GENERAL INSTRUMENT 3004. 3047 GRUNDIG 3035 HITACHI 3004 3007 3002. 3040 SATBOX 3024 SIGNAL 3007 SIGNATURE 3004 STS 3015 SALORA 3026 SCIENTIFIC 3003.49. 3008 ANDOVER 3037 BELL & HOWELL 3006 BIRGMINGHAM CABLE COMMUNICATION 3020 BRITISH TELECOM 3002. 3003. 4045. 3007 STARGATE 3007 STARQUEST 3007 TAIHAN 3043 TELESERVICE 3022 TELE+1 3028 TUDI 3023 TUSA 3007 TOCOM 3005 TONGKOOK 3042. 4018 4062 4043 4056 4023.Controlling the rest of your system SEG SIEMENS SKYMASTER SONY STRONG SUNSTAR TPS TANTEC TECHNISAT TECHNILAND TELEFUNKEN TELEKA TELESAT THOMSON TONNA TRIAD TRIASAT UNITOR UNIVERSUM VENTANA VORTEC VTECH WINERSAT WISI XSAT XCOM MULTIMEDIA ZEHNDER 4030. 3031. 4031. 3020. 4:49 PM . 3046 GOLDSTAR 3014. 4047 CABLE TV TV 09 JASCO JERROLD TVC Manufacturer Code ABC 3002. 4051 4017. 3032. 3020. • Fully extend the FM wire antenna. Broadcast stations cannot be selected automatically. • Press the MONITOR button to turn monitoring off. • Adjust the MASTER VOLUME. No sound is output when a function is selected. • Tune in the correct frequency. Investigate the other components and electrical appliances being used.74 68 01. • Place the antenna farther away from the equipment causing the noise. • Connect the power plug to the wall outlet. • Make sure the component is connected correctly (refer to pages 14–19). • Make sure there are no loose strands of speaker wire touching the rear panel. ask your nearest Pioneer authorized service center or your dealer to carry out repair work. • Connect an additional internal or external AM antenna (refer to page 19). No image is output when a function is selected. • Connect an outdoor antenna (refer to page 19). • Connect the antenna (refer to page 19). • Disconnect the power plug from the outlet. 5:13 PM . position for best reception. • Select the correct component (use the MULTI JOG/INPUT SELECTOR dial or the MULTI CONTROL buttons on the remote). Sometimes the trouble may lie in another component. • Press MUTE on the remote control to turn muting off. • Adjust the direction and position for best reception.10 Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. • Make sure the component is connected correctly (refer to pages pages 14–19). check the points below. and insert again. If the trouble cannot be rectified even after exercising the checks listed below. Considerable noise in radio broadcasts.12. This could cause the receiver to shut off automatically. Problem Remedy The power does not turn on. • Route 2 RF and digital cables away from the antenna terminals and wires. If you think that there is something wrong with this component. and secure to a wall.68.12. • Connect an outdoor FM antenna (refer to page 19). 68 En XRB3013A. • Turn off the equipment causing the noise or move it away from the receiver. 69 En XRB3013A.74 69 01. 30° of the remote sensor on the front panel (refer to page 6). or to the neutral position. but not from LD or DVD player. • Refer to Surround back speaker setting on page 40 to check the surround back speaker settings. • Move the cassette deck further from your receiver. • Avoid exposing the remote sensor on the front panel to direct light.1 channel setting and the sound mode are set for surround back sound. (refer to page 34). • Replace the batteries (refer to page 6). • Set the SIGNAL SELECT to AUTO. If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. • Refer to Setting the relative volume level of each channel on page 44 to check the speaker levels. • Refer to Speaker setting on page 39 to check the speaker settings. • Remove the obstacle or operate from another position. • Press FL DIMMER on the remote control repeatedly to return to the default.12. Can’t operate the remote control. Noise during playback of a cassette deck. • Refer to the table on page 33 to make sure the 6.Additional information 10 Problem Remedy No sound from surround or center speakers. • Set the digital volume level of the player to full. during playback. Sound is produced from other components. noise is output. • Make digital connections (refer to page 14) and set the SIGNAL SELECT to DIGITAL (refer to page 34). The display is dark or off.68. • Refer to the instruction manual supplied with the DVD player. • Connect the speakers properly (refer to page 19–21). No sound from surround back speakers. 5:13 PM . DIGITAL or ANALOG according to the type of connections made. until the noise disappears. When a search is performed by • This is not a malfunction. but be sure to turn the volume a DTS compatible CD player down to prevent the output of loud noise from your speakers. • Set the digital input settings correctly (refer to page 43).12. No sound is output or a noise is output when software with DTS is played back. • Operate within 23 feet ( 7 m). ...... 1 Vp-p/75 Ω Continuous average power output of 100 watts* per channel.000 Hz with no more than 0...0 %.... 5 Hz to 7 MHz +0 – 3 dB Signal-to-Noise Ratio ....2 dB Stereo: 38...0 %..............5 MHz to 108 MHz Usable Sensitivity . DVD/LD.. Loop antenna Signal-to Noise Ratio [EIA... CD-R/TAPE/MD....3 µV/ 75 Ω) 50 dB Quieting Sensitivity . ± 6 dB (100 Hz) TREBLE ... ± 6 dB (10 kHz) LOUDNESS .......................12...............0 %........ 96 dB Output (Level/Impedance) VCR/DVR ............... VCR/DVR............. 100 W per channel (1kHz.................10 Additional information Specifications Video Section Amplifier Section Input (Sensitivity/Impedance) VCR/DVR............... at 1 W (1 kHz)] CD....... A network) CD.......2 dBf............... min..................................12...........2 %** total harmonic distortion (front)....... 1...... 1................ 1 Vp-p/75 Ω Frequency Response VCR/DVR.. CD-R/TAPE/MD................... 100 W per channel (1kHz....... short circuited. 50 dB Antenna . 1. 55 dB FM Tuner Section Frequency Range .. 1........................... IHF (1.... CD-R/TAPE/MD. 530 kHz to 1.............. 40 dB (1 kHz) Frequency Response .. 100 W (1kHz........ 25 dB Signal-to-Noise Ratio ............................ 75 Ω unbalanced AM Tuner Section Frequency Range ........................ VCR/DVR................. 200 mV/47 kΩ Frequency Response CD.......... 350 µV/m Selectivity . TV/SAT ........... TV/SAT ..... TV/SAT ..................6 dBf Signal-to-Noise Ratio ... Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion ........ CD-R/TAPE/MD......................... Mono: 20..........68.. 8 Ω) * VSX-D811S only Input (Sensitivity/Impedance) CD...... 200 mV/2..................700 kHz Sensitivity (IHF.....................5 % (1 kHz) Alternate Channel Selectivity .. DVD/LD.................... DVD/LD...... from 20 Hz to 20.................. VCR/DVR.........74 70 01.............................................. 5 Hz to 100... Loop antenna) ...... TV/SAT ............... VCR/DVR.. CD-R/TAPE/ MD REC ......... TV/SAT ..... 100 W per channel (1kHz... 55 dB Cross Talk ...................................... 8 Ω) Center .......... 8 Ω) Surround .........2 kΩ Tone Control BASS .. DVD/LD........ at 8 ohms................ Continuous Power Output Front .0 %................. Stereo: 0.............. 87. DVD/LD....... Mono:13. 79 dB 70 En XRB3013A......... 5:13 PM .......... 60 dB (400 kHz) Stereo Separation ................... +9 dB/+9 dB (100 Hz/10 kHz) Signal-to-Noise Ratio (IHF........ 8 Ω) Surround Back* ........................ DVD/LD.000 Hz +0 – 3 dB Output (Level/Impedance) VCR/DVR REC............................. TV/SAT ] MONITOR ..... 30 Hz to 15 kHz (±1 dB) Antenna Input (DIN) ... ...2 lb) Furnished Parts AM loop antenna .............. 10. (SWITCHED) Dimensions ....... AC 120 V.................. 300W..........................................0 kg (19...............12... 2 Remote control ......................... 1 Specifications and the design are subject to possible modifications without notice........................................... * Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers......................... ** Measured by Audio Spectrum Analyzer........12................ 420 (W) x 158 (H) x 401 (D) mm (16-9/16 (W) x 6-4/16 (H) x 15-6/16 (D) in............ 100 W MAX............................... 1 Dry cell batteries (AA size IEC R6P) ....................... 1 W AC Outlet .......................Additional information 10 Miscellaneous Power Requirements .............. due to improvements............ 340 VA VSX-D811S . 5:13 PM .......................5 kg (23..........................................8 lb) VSX-D811S .. 9....... 60Hz Power Consumption VSX-D711 ......) Weight (without package) VSX-D711 .......... 71 En XRB3013A... 420 VA In Standby ...... 1 FM wire antenna ................ 260W......74 71 01.............68... 1 Operating instructions . we want you listening for a lifetime. One that lets the sound come through loud and clear without annoying blaring or distortion-and. sewing machine Vacuum cleaner. hair dryer.Additional information NI C IND U S SO CIAT N •A EST 1924 • EIA RIES ELECT O ST R 10 IO We Want You LISTENING For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. So what sounds “normal” can actually be loud and harmful to your hearing.68. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. Decibel Level 30 40 50 60 70 80 Example Quiet library. Over time your hearing “comfort level” adapts to higher volumes of sound. most importantly. pneumatic drill Rock band concert in front of speakers. We Want You Listening For A Lifetime Used wisely. Since hearing damage from loud noise is often undetectable until it is too late. thunderclap Gunshot blast. your new sound equipment will provide a lifetime of fun and enjoyment. alarm clock at two feet. normal conversation. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. To establish a safe level: • Start your volume control at a low setting. This list of sound levels is included for your protection. garbage disposals. bedroom away from traffic Light traffic. motorcycle. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. soft whispers Living room. noisy restaurant Average city traffic. this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. quiet office Air conditioner at 20 feet.74 72 01. After all. without affecting your sensitive hearing. THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE 90 100 120 140 180 Subway. truck traffic. We Want You IO LISTENING For A Lifetime 72 En XRB3013A. • Slowly increase the sound until you can hear it comfortably and clearly. Sound can be deceiving. and without distortion. chain saw. jet plane Rocket launching pad NI C IND U SO CIAT • •A S EST 1924 N EIA RIES ELECT O ST R Information courtesy of the Deafness Research Foundation. Once you have established a comfortable sound level: • Set the dial and leave it there. 5:13 PM . refrigerator.12. lawn mower Garbage truck. Taking a minute to do this now will help to prevent hearing damage or loss in the future.12. 12.Additional information 10 73 En XRB3013A.68.74 73 01. 5:13 PM .12. 68.12.10 Additional information 74 En XRB3013A. 5:13 PM .74 74 01.12. 12. 5:13 PM .12.68.74 75 01.Additional information 10 75 En XRB3013A.