product catalogue2009 English Autoadapt Autoadapt is a leading global provider of vehicle adaptation solutions for people with reduced or limited mobility. Our products are used by thousands of satisfied customers worldwide. Our long experience of vehicle adaptation has resulted in several innovations, such as the popular Carony vehicle wheelchair system and the Turny seat lift, making the disabled and elderly more independent. Autoadapt’s history began in 1990, when the adaptation company Beram AB was established. In 1996 the company came under new ownership and changed its name to Autoadapt AB. The Autoadapt head office, development and production plant is in Stenkullen, in the south western part of Sweden. The company has a subsidiary in Birmingham, Autoadapt UK Ltd., for the UK market. Today Autoadapt is represented in 45 countries worldwide, with a network of more than 230 Autoadapt dealers. Autoadapt is proud to be a part of the mobility programmes at Fiat and Toyota. Autoadapt is ISO 9001:2000 certified for quality management systems. It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all. 2 Safety tested products Autoadapt’s guiding rule is to offer safety tested products of high quality that comply with current regulations and directives. The pull test rig at Autoadapt. Autoadapt products crash tested at SP (the Technical Research Institute of Sweden). Explanation to the symbols used in this catalogue: CE-marked Crash tested EMC tested (Electro magnetic compatability) 10 000 cycle test Flammability In the Swedish tradition of safety Autoadapt is working actively within Europe to enhance the safety level of car adaptation products. We regard it as our mission to offer the disabled drivers and passengers the same safety conditions as other road-users. As a guidance, you will in this catalogue find symbols representing the different tests that the products have passed. The pull tests made on the products are not stated by a symbol, as these tests are included in the crash test standards. Peter Wahlsten Vice President 3 (CSC) Customer Support Centre Please feel free to contact our Customer Support Centre! We will assist you when placing your orders, provide technical support and guide you to the best product solutions to meet your requirements. The CSC will also assist if you have any complaints and claims for returned goods. For returned goods it is absolutely necessary to always contact the CSC department before sending any goods back to us. CSC Customer Support Centre Opening hours: Monday to Friday 08.00 - 16.30 phone: +46 302 25440 fax: +46 302 25407
[email protected] Marcin Dabrowski Sales/Support Peter Meiner Sales/Support Günther Loos Sales/Support 4 DealerWeb Autoadapt’s DealerWeb delivers up-to-date information around the clock In addition to the Product Catalogue, we are pleased to offer our online service DealerWeb, which gives you instant access to the latest products, marketing material, manuals, installation guides and much more. One useful feature is the selection of a vehicle specific mounting bracket for a product. Finding the correct mounting bracket is only a few clicks away! Using DealerWeb is easy. All you need is an Internet connected computer and your login details. Once logged in, you have access to all available product information as well as the latest news and updates. In our commitment to giving you the very best service and support, we are convinced that you will see the benefits and come to appreciate how using DealerWeb can save your business valuable time. If you haven’t received your DealerWeb log in or need to add log in access for your sub dealers, please contact:
[email protected] 5 6 . .................... 28 Turnout options....................... 54 7 .............................. 8 Carony options............................... 52 Various aids........................................................................ 10 Carony Go ........ 29 Turnin.................... 34 Driving aid options........................................ 32 Driving aids................ 19 Seats...Contents Carony. 22 Turny........................................................................... 40 Wheelchair stowing solutions............................................. 31 Driver Test Station.......................................................................................................................................... 14 Carony Go options.......................................................................... 26 Turnout..................................................... 25 Turny options................................. 15 Carony Drive...................................... 41 Belts.................... 18 Carony Drive options............................................. 49 Wheelchair securements....... 20 Seat options... armrests and push handle. seat with headrest.Carony Seat with armrests and neckrest Push handle The complete Carony Carony carriage (mounted under the seat) Carony rails mounted in the vehicle (available in 3 different lengths. carriage and Carony 475 mm rails (inside the vehicle) installation Carony 12” right side right side left side left side seat BEV seat Recaro L BEV seat Recaro L article no. footrests. see page 10) Wheel unit Carony 12” Complete with wheel unit. 100399 100683 100402 100684 8 . A set of spacers for 3 different fixed heights is included. 101232 101245 101233 101246 Carony Kids This Carony version has an extra short seat (40 cm) to fit a child or a short person. The seat length is extendable with an extra 5 cm. footrests. head support. Complete with wheel unit. armrests. seat with headrest. seat with headrest. body supports. anti-tip device. armrests and push handle. Complete with wheel unit. extendable foot rack and Carony 475 mm rails installation Carony Kids 12” Carony Kids 24” right side left side right side left side seat BEV Kids seat BEV Kids seat BEV Kids seat BEV Kids seat article no. 101243 101244 101423 101422 9 . carriage and Carony rails 475mm (inside the car).Carony Carony 24” Complete with wheel unit. installation Carony Fixed right side right side left side left side seat BEV BEV BEV BEV seat Kids seat seat Kids seat article no. seat with headrest. anti-tip device Swan. footrests. 100872 100905 100889 100906 Carony Fixed (only in combination with Turny) This Carony version can NOT be height adjusted. carriage and Carony 475 and 550 mm rails (inside the vehicle) installation Carony 24” right side right side left side left side seat BEV seat Recaro L BEV seat Recaro L article no. armrests and push handle. footrests. From now on in colour Ruby red. push handle. The BEV seat and the Recaro Specialist L seat.Carony options Carony seat options The manual Carony models (12”. 550 and 475 mm Carony rail options When ordering Carony 12” the 475 mm rails are included. For Carony 24” combined with Turnout.24”) have the option of being combined with either the BEV seat or the Recaro Specialist L. 101868 purpose For all Carony models when combined with Turny. please refer to page 20: Seats. When ordering Carony 24” the 475 and the 550 mm rails are included. If ordered separately. The 600 mm rails are ordered separately 550 mm 600 mm 101867 101866 Carony push handle with spacers for the BEV seat Push handle article no. Carony push handle prepared for the BEV seat and the Recaro seat. length 475 mm article no. Rails (inside the vehicle): 600. NOTE! Ordered separately. Also for Carony 12” with Turnout. 101855 Mounting piece for the Recaro seat 10 . For Carony 24” combined with Turnout in a vehicle with deep thresholds. Carony options Adjustable angle legrest Adjustable angle legrest For people with long legs or for people with problems bending the knees. left 100424 100426 Child legrest Child legrest article no. article no. Calf/leg support 100440 11 . right Adjustable angle legrest. Foot support /heel belt (one piece) 100630 Calf/leg support Calf/ leg support article no. Child legrest (in pairs) 100754 foot support Foot support/heel belt article no. Adjustable angle legrest. but can also be ordered separately. Level raising kit Level raising kit 100700 Puncture free wheels Bear in mind that puncture free wheels add weight to the Carony wheel unit and make it heavier to lift. article no. Only for Carony 12”. Carony carriage 412227 12 . Anti-tip device Anti-tip device 100853 Level raising kit. mounted under the seat 100680 Anti-tip device “Swan” For Carony 12” and 24” (in pairs). 50 mm For raising the level of the Carony rails on the wheel unit. 24” and Kids. puncture free 100438 100697 101278 7x1 (Carony 24” front wheel) Carony carriage The carriage is included when ordering a Carony. puncture free Front wheels 8x2”. Included as standard with the Carony 24”. article no. Front wheel 8x2 and rear wheel 12” Rear wheels 12”. puncture free Front wheels (thin) 7x1”. Carony carriage (mounted under the seat) article no. article no.Carony options Foot rack Foot rack The foot rack is extendable and used for keeping the feet up when swivelling with the seat. article no. It is easily mounted in the Carony carriage. Included as standard with the Carony Kids. Foot rack. Carony docking device Carony docking device 101518 Tilda Tilda enables the seat to be tilted 15º backwards. 101837 101838 101839 on the right side on the left side 13 .Carony options (towards the front) Transport fittings The transport fittings are mounted under the seat of the Carony and are used for fixing the securement if the wheelchair is transported in a vehicle without the Carony system. installation Tilda Tilda Tilda footrest The optional Tilda footrest article no. Tilda will also provide an excellent help to get the feet easily over the threshold when swivelling inside the vehicle. If the optional footrest is used. This product improves the head space when sliding the seat between the Carony wheel unit and the Turnout swivel inside the vehicle. Carony Transport Fittings (in pairs) 101166 Carony docking device Used when lifting a Carony or a Carony Go wheel unit with a Carolift hoist. article no. article no. in three steps. Height under the seat: 24 mm. our power wheelchair in the Carony family . 101527 101528 14 . batteries and a charger. The two joystick versions can be installed on either side in the vehicle. Carony Go Complete including wheel unit with footrests and anti-tip device.can only be retailed by selected Carony Go dealers. 475 mm Carony rails.Carony Go The Carony Go . joystick Carony Go Carony Go right side left side article no. seat with headrest and armrests. The option of having the joystick on the left or on the right hand side is purely for the benefit of suiting left-handed or right-handed wheelchair occupants. The reason for this is that the product requires special knowledge and experience in wheelchairs and a service readiness that meets the needs of power wheelchair occupants. rear and side lights. Carony Go push handle 101519 Carony Go attendance drive Must be used in combination with push handle. Note! Push handle is not included article no. Carony Go attendance drive 101542 Carony Go/Drive lighting-kit Light options include front. This option can only be ordered together with a Carony Go order and is NOT available for After-sale article no. Carony Go Dynamic programming unit 101525 Carony Go Dynamic programming unit Carony Go push handle Carony Go push handle For manual operation of Carony Go. article no.Carony Go options Carony Go/Drive Dynamic programming unit article no. Carony Go lighting-kit 101517 15 . 101520 Carony Go/Drive battery charger Mastervolt mod IVO 24/6 IP 65 article no. 2 pcs.Carony Go options Carony Go/Drive batteries Two 12 V batteries. 45 Ah. always in pairs Carony Go batteries. Calf/leg support 100440 16 . article no. Batteries. When replacing batteries always replace both at the same time! article no. Carony Go Adjustable angle legrest Carony Go Adjustable angle legrest right side left side 101575 101576 Calf/leg support Calf/ leg support article no. Battery charger Carony Go battery charger 101521 Carony Go adjustable angle legrest Carony Go Adjustable angle legrest For people with long legs or for people with problems bending the knees. The docking plate for Carony Go must be ordered separately. DriveLOC Docking plate for Carony Go article no. If the optional footrest is used. Tilda will also provide an excellent help to get the feet easily over the threshold when swivelling inside the vehicle. article no. Carony docking device Carony docking device 101518 17 . in three steps. This product improves the head space when sliding the seat between the Carony wheel unit and the Turnout swivel inside the vehicle. installation Tilda Tilda Tilda footrest The optional Tilda footrest article no. Height under the seat: 24 mm. article no. 101837 101838 101839 on the right side on the left side Emergency release DriveLOC Wheelchair securement. DriveLOC docking plate for Carony Go 101841 Carony docking device Used when lifting a Carony or a Carony Go wheel unit with a Carolift hoist. DriveLOC 101840 DriveLOC docking plate for Carony Go Docking plate to be fixed under the wheelchair in order to adapt it for DriveLOC.Carony Go options Tilda Tilda enables the seat to be tilted 15º backwards. specially designed for Carony Drive or Carony Go. Carony Drive The Carony Drive has the same performance as the Carony Go and uses a control system from Dynamic. Carony Drive Complete including batteries. It is a power wheelchair. charger and a docking plate for the DriveLOC. joystick Carony Drive Carony Drive 52 cm 38 cm article no. only 38 cm and up to 52 cm at the highest. 101851 101852 right side left side The footrest moves forward as the seat is lowered 18 . The Carony Drive can NOT be combined with Turnout or Turny. specially designed to be used when driving a vehicle from the wheelchair. The arm holding the wheelchair control can be lowered and the control can be flipped down and out of the way when seated at the steering wheel. The adjustable seat height is. at lowest position. to provide better seat-comfort and to lower the knees away from the steering wheel. The footrest moves forwards as the seat is lowered. Autoadapt XL Belt Female buckle. When replacing batteries always replace both at the same time! article no. Carony Go/Drive Dynamic programming unit 101525 NEW Autoadapt XL-Belt e17 The Autoadapt XL-Belt is a 3-point belt that is crash tested and classified according to E17. always in pairs Carony Go batteries. article no. flexible.Carony Drive options Emergency release Drive LOC Wheelchair securement. article no. short holder Female buckle. short holder 100162 102122 102123 102124 19 . 2 pcs. long holder Female buckle. specially designed for Carony Drive. Please also refer to DriveLoc in the chapter “Wheelchair securements”. 45 Ah. 101520 Carony Go/Drive battery charger Mastervolt mod IVO 24/6 IP 65 Battery charger article no. Carony Go battery charger 101521 Dynamic programming unit Carony Go/Drive programming unit article no. Batteries. Drive LOC 101840 Carony Go/Drive batteries Two 12 V batteries. body support and armrests are included. Seat width: 440 mm BEV Kids seat Please note that the BEV Kids seat. article no. *The Carony carriage is included with the BEV Kids seat for Carony. if ordered separately.Seats BEV seat Seat length: 470 . article no. neck support. BEV seat BEV seat BEV seat including armrests 100420 100622 Recaro Specialist L Seat length: 485-530 mm. Recaro Specialist L Recaro Specialist L including armrests Recaro Specialist L 100693 100701 BEV Kids seat Seat length: 400-450 mm. Seat width: 440 mm Ergonomic seat.530 mm (adjustable). The BEV Kids seat for Carony (*) also include the carriage and the Carony foot rack. Headrest. BEV Kids seat for Carony * BEV Kids seat for Turnout/Turny 100619 101247 *Foot rack. specially designed for easy individual adaptation using a variety of BEV options. Now upholstered in a new solid grey fabric. included in the BEV Kids seat for Carony. 20 . seat width: 510 mm. article no. should be combined with the Child Leg Supports when used with Carony. The seat also has a pneumatic lumbar support. The Adapty Seat 8 has all the adjustments. 8 adjustments Adapty seat. Adapty Seat 12 has adjustments for sliding back and forth. Seat width: 490 mm Comfortable seat for Turny and Turnout. Note: Not for the Carony! LP seat grey position in vehicle Bruno L P seat. 101869 101871 101870 101872 101875 LP seat beige Adapter kit for installing the Bruno LP seat (TAS-K-25 12) on a Turny Adapty seat Seat length: 500 mm. Seat width: 500 mm (width incl operation panel: 560 mm) Adapty Seat 12 The Adapty Seat is upholstered in a dark grey fabric and equipped with heating in the seat and in the lower part of the backrest. seat height adjustment and individual adjustment of thigh supports (a split front edge of the seat). 101861 101862 101860 101863 Adapty Seat 8 21 .Seats Bruno L P seat Seat length: 490 mm. except for the thigh support. beige Right side Right side article no. 12 adjustments Adapty seat. tilt backwards and tilt forwards. grey Arm rests (pair) grey Bruno L P seat. 12 adjustments Adapty seat. 8 adjustments left side right side left side right side article no. beige Arm rests (pair). position in vehicle Adapty seat. Provides lengthwise adjustment with a travel of 240 mm. Slide rails for BEV seat and Recaro L 100505 Caroslide Powered seat slider. Caroslide 101864 Comfort headrest Head rests colour Comfort headrest for BEV seat Comfort headrest for Recaro L Carony Kids headrest Grey Black Grey article no. 100458 101153 101365 Carony Kids headrest 22 . 100848 100428 100429 101879 101880 Slide rails Slide rails The seat slide rails are mounted on the Turnout for lengthwise adjustment of the seat. Delivered complete with wire harness and toggle switch. Caroslide is prepared for the BEV seat and the Recaro seat. The height is 41 mm. article no.Seat options Armrests right Armrest for BEV seat Armrest for BEV seat Armrest for BEV seat Armrest for Recaro L Armrest for Recaro L X X X left X X X article no. article no. Seat options Head support Head support (neck roll) Gives sidewise support for the head. article no. Side support 100430 Backrest cushion BEV seat cushions article no. article no. Head support 100665 Lumbar support Lumbar support The lumbar support is placed under the backrest cushion or under the seat cushion for support. Backrest cushion Seat cushion 101878 101450 Seat cushion 23 . rubber bladder 100432 Side support Side support The side support is placed behind the backrest cushion or behind the seat cushion for support. article no. It is fixed by a Velcro fastening. Lumbar support. BEV Pressure Relief Seat Cushion. Hard for a person weighing more than 75 kg. Foldable backrest.Seat options BEV Pressure Relief Seat Cushion This seat cushion divides the weight better on the seat and relieves from pressure when seated for a longer period. Medium BEV Pressure Relief Seat Cushion. Hard 101649 101650 Foldable backrest Foldable backrest (adaptation kit) If the BEV seat is installed in a 2-door vehicle the backrest must be easy to fold towards the front and allow access to the backseat. BEV seat 100699 24 . article no. Hardness: Medium for a person weighing less than 75 kg. article no. 101442 101443 101444 101445 The Turny HD and Orbit are delivered without covers and without a mounting bracket. User weight 150 kg. Model Turny Orbit vertical stroke 300 300 395 395 mm mm mm mm installation right side left side right side left side article no. 101446 101447 101448 101449 Turny cover kit Contour Turny cover kit Contour: Grey The Turny HD/Orbit are delivered without covers. The Down/Up movement is powered and operated by a hand-held control. The covers are ordered separately. 101522 101523 101383 101385 Turny cover kit Contour: Beige 25 . User weight 150 kg. These items must be ordered separately. Turny Orbit All movements of Turny Orbit are powered and operated by a hand-held control. Model Turny HD vertical stroke 300 300 395 395 mm mm mm mm installation right side left side right side left side article no. Model Contour cover kit vertical stroke 300 mm 395 mm 300 mm 395 mm colour Grey Grey Beige Beige article no.Turny Turny HD The swivelling movement of Turny HD is manually operated. air bag resistance and installation instructions. Turny measurement tool. Dark grey. or contact our CSC department. article no. hardware and pre-drilled bolt holes. article no. left 101877 102095 26 . flat model In some vehicles where the space for a Turny installation is small it might be necessary to use the flat covers. Ask our Support department for extra air-bag resistance. Model Turny cover kit Flat model vertical stroke 300 mm 300 mm 395 mm 395 mm install. The brackets are coated and delivered with hardware. right side 101463 101464 left side right side 101465 101466 left side (Sample) Vehicle specific mounting brackets Autoadapt supplies vehicle specific mounting brackets for Turny HD/Orbit. Turny Universal Mounting Bracket 101836 Turny measurement tool A tool for measuring where the Turny shall be fitted inside the vehicle. The vehicle specific mounting brackets are delivered with hardware and installation instructions. right Turny measurement tool. Turny Universal Mounting Bracket For vehicles where there is not yet a specific bracket available. article no. For information on what vehicles we have available please consult the Autoadapt DealerWeb to see the latest updates. The bracket is coated and delivered with “legs”.Turny options Turny cover kit. Turny/Turnout Wireless Remote Control 101843 Footrest The footrest is foldable. article no. plug and play for Turny and Turnout. Seat spacers Seat spacers 35 mm 70 mm 101227 100728 27 . article no. Turny footrest Turny footrest 101292 Turny seat spacers 70 mm 35 mm These spacers are placed between Turny and the seat if the seat height needs to be raised. article no. Frequency: 869.85 MHz. It is mounted between the Turny and the seat rails.Turny options Turny/Turnout Wireless Remote Control A key-ring size transmitter and a receiver. The mounting brackets are coated in a dark grey colour. vehicle type Turnout Turnout Turnout Turnout 2 2 4 4 2 2 4 4 (3) (3) (5) (5) door door door door vehicle vehicle vehicle vehicle installation right side left side right side left side article no. 100714 100715 100716 100717 Vehicle specific mounting brackets Please consult the Autoadapt DealerWeb for updated information on what vehicle specific brackets we have available.Turnout Turnout Manually operated swivel base. 100412 100413 100414 100415 Turnout E Powered swivel base. vehicle type Turnout Turnout Turnout Turnout 2E 2E 4E 4E 2 2 4 4 (3) (3) (5) (5) door door door door vehicle vehicle vehicle vehicle installation right side left side right side left side article no. 28 . Hardware and air bag resistance are included as well as mounting instructions and Manufacturer Certificate. article no.85 MHz. plug and play for Turny and Turnout. article no.Turnout options Standard mounting bracket The Standard mounting bracket is an uncoated work piece for further adaptation. This provides extra space by the steering wheel in a driver seat installation. Standard mounting bracket for Turnout 101876 Universal mounting bracket Coated mounting bracket for further adaptation. Frequency: 869. article no. article no. Nuts and bolts included for assembly. Ask our Support department for extra airbag resistance. Delivered with Manufacturer Certificate and Installation instructions. the upper swivel plate turns slightly outwards before the actual swivel movement forward and outwards. (Included in Turnout 4E) article no. Turny/Turnout Wireless Remote Control 101843 Open slewing bracket By using the Open slewing bracket. Universal mounting bracket 101844 Turny/Turnout Wireless Remote Control A key-ring size transmitter and a receiver. or extra space when glove compartment is in the way. Open slewing bracket 101685 Open slewing bracket Slide rails Slide rails The seat slide rails are mounted on the Turnout for lengthwise adjustment of the seat. Slide rails for BEV seat and Recaro L 100505 29 . For left and right side use. article no. Height under the seat: 24 mm. right side version. installation Tilda Tilda Tilda footrest on the right side on the left side article no. Caroslide 101864 Tilda Tilda enables the seat to be tilted 15º backwards. Caroslide is prepared for the BEV seat and the Recaro seat. in three steps. with a Turnout manual.Turnout options Caroslide Powered seat slider. Provides lengthwise adjustment with a travel of 240 mm. If the optional footrest is used. 101837 101838 101839 The optional Tilda footrest 30 . Tilda will also provide an excellent help to get the feet easily over the threshold when swivelling inside the vehicle. left side version. To avoid a conflict between the release levers it is recommended to use a Tilda. The height is 41 mm. This product improves the sitting-comfort and the head space inside the vehicle. and vice versa. 101019 101020 Standard mounting bracket The Standard mounting bracket is an uncoated work piece for further adaptation. article no. Ask CSC department for extra air-bag resistance.Turnin Turnin seat swivel Turnin swivels the seat inwards and makes transfer between wheelchair and car seat inside the vehicle possible. Nuts and bolts included for assembly. article no. Maximum 95° swivel. Standard mounting bracket for Turnout NOTE! This product is NOT CE-marked! 101876 Universal mounting bracket Coated mounting bracket for further adaptation. Universal mounting bracket 101844 31 . installation Turnin Turnin right side left side article no. Delivered with Manufacturer Certificate and Installation instructions. Turnin is powered and operated via a hand-held control. The Drive Test Station consists of: A cockpit on wheels with removable swivel seat unit. right and left foot pedals. pedals with quick release left foot accelerator. left and right hand controls. Electronics. Note: Laptop not included! article no. Load Sensor. turning the steering wheel with different steering knobs to find what combination fits your client best. The DTS allows you to test and compare the clients strength and reaction in using a right and left hand control.Driver Test Station DTS Driver Test Station NEW Our new Autoadapt Driver Test Station is an evaluator tool. used to determine a customer’s strength. The DTS is extremely flexible and allows the test person to perform the test either by transferring to the swivel seat or from the clients wheelchair. No additional power except for a laptop is needed. Driver Test Station RHD Driver Test Station LHD 102055 102083 32 . PC Software and calibrator. a torque adjustable steering wheel with six different kind of steering wheel knobs. The Test Station does not produce a pass/failed result but provides the evaluator with true facts in making these decisions. mobility and reaction time. right foot strength.Driver Test Station The DTS software showing the start page with the different test items: Right hand strength. left hand strength. The seat has a swivel feature for easy entry. For wheelchair occupants: DTS with the wheels and the seat floor unit removed. The wheelchair can be secured to the wheelchair anchorage at the front. left foot strength and also the ability to react. For walking or transferring individuals: DTS with the seat floor unit mounted. 33 . Driving aids Carospeed Classic The Carospeed Classic hand control for accelerator and brake is equipped with Hill-holder and set function for cruise control. 100730 100729 100840 100839 34 . set function for cruise control and a multiple selector for the primary electrical functions. 100271 100368 100841 100842 Carospeed Classic E Carospeed Classic E The Carospeed Classic E hand control for accelerator and brake is equipped with Hill-holder. Carospeed Classic knob Carospeed Carospeed Carospeed Carospeed Classic Classic Classic Classic black wood/black black wood/black type of vehicle LHD LHD RHD RHD article no. knob Carospeed Carospeed Carospeed Carospeed Classic Classic Classic Classic E E E E black wood/black black wood/black type of vehicle LHD LHD RHD RHD article no. 100990 100992 Carospeed Classic T Carospeed Classic T 2 models 2 models LHD RHD Carospeed TE The Carospeed Classic TE is delivered with a choice of two different T-grip handles. The hand control is equipped with Hill-holder. 100991 100993 Carospeed Classic Indicator The Carospeed Classic Indicator is equipped with Hill-holder. set function for cruise control and a multiple selector for the primary electrical functions. Carospeed Classic TE T-grip handle type of vehicle Carospeed Classic TE Carospeed Classic TE 2 models 2 models LHD RHD article no. T-grip handle type of vehicle Carospeed Classic T article no. knob Carospeed Classic Indicator Carospeed Classic Indicator black black type of vehicle article no. LHD RHD 101280 101283 Carospeed Classic Indicator 35 . set function for cruise control and a toggle switch for the turn right and the turn left indicators.Driving aids Carospeed Classic T The Carospeed Classic T is delivered with a choice of two different T-grip handles. The hand control is equipped with Hill-holder and set function for cruise control. Menox wire pack for installation is also included. operated with left hand. type of vehicle Carospeed Menox Standard article no. Carospeed Menox Stripped The stripped version of the hand control has the same features as the Menox Standard. The box also provides ability to add interval.K. NEW The Multifunction switches installed inside the handle. 102013 102014 Carospeed Menox Standard Carospeed Menox Standard* * LHD RHD For right side in the vehicle (U. The kit includes a set of switches and a wire harness. Carospeed Menox Gas Holder 102024 36 . as well as for activating the horn.K. Menox wire pack for installation is also included. The Menox Gas Holder keeps the gas in place mechanically (by magnets). The hand control is delivered with a grey handle and the slim designed plastic hard cover in black. Carospeed Menox Stripped NEW type of vehicle Carospeed Menox Stripped Carospeed Menox Stripped* * LHD RHD article no. headlights. article no.Driving aids Carospeed Menox Standard NEW A floor mounted hand control for accelerator and brake with a switch for the Hill-holder and the set function for cruise control.). automatic stop and hazard to the electrical functions. Choose your own design among the wide range of optional tops and covers. Please add a wire pack for standing pedals. but is delivered without the top of the handle and without the cover for the lever. Features: Indicators. Please add a wire pack for standing pedals. 102064 102065 For right side in the vehicle (U. Does not interfere with the ability to brake. operated with left hand.). 8-way Multi Function Relay box 102057 Carospeed Menox Gas Holder Option for vehicles without cruise control. article no. speed. wipers and washer Carospeed Menox Multi Function Add an 8-way Multifunction Relay box for the primary electrical functions. This article is only needed for some vehicles with LHD as it is included as standard in RHD hand controls. Grey 102066 102019 102018 102017 102016 Black Black Steel Steel Carbon Wood Carbon Wood Carospeed Menox leather-look covers The Leather look cover kit includes covers for the brake shaft. The kit also includes a stocking to protect the hill-holder mechanism. the lever. Grey article no. Hard cover article no.Driving aids Carospeed Menox wire pack For hand control installation with standing gas pedal. Carospeed Menox wire pack 102026 Carospeed Menox tops for the handle Choose a design that blends smartly into the vehicle interior. the handle attachment piece and the hill-holder housing at the base. article no. Black hard cover 102067 37 . Black Light grey Grey Black Light grey Grey Beige 102020 102021 102022 102023 Beige Carospeed Menox hard cover The slim designed cover is made of injection moulded black plastic. article no. Wood Carbon Steel Black 102032 102033 102034 102035 50 mm: article no. Grey 102054 Steering device. no. Ergo article no. model Low Low Flat handle that can be used with the palm of the hand. article no. article no. model M-Standard Uses the same handle as the Carospeed Menox hand control.Driving aids Adapter Adapter for steering device article no. model Round 40 mm: art.pin steering device The 2. 2-pin 3-pin 102058 102059 38 . model Ergo Oval shaped ergonomic design. Adapter 102145 NEW Steering device. 102040 102041 102042 102043 Round 50 mm Steering device. article no.and 3-pin steering devices can easily be reshaped to fit the hand. Wood Carbon Steel Black 102028 102029 102030 102031 Round 40 mm Steering device. Wood Carbon Steel Black 102036 102037 102038 102039 M--Sandard 2.and 3. Hinge kit for original gas pedal is included. The unit has a quick release for easy removal. automatic gear box (2 pedals) Menox Stamp pedal. article no. Provided with a hinge for lowering and folding up. Left Foot Accelerator pedal. flip-up model The hinged left foot pedal transfers the force to the accelerator by a high quality Teflon coated wire. article no.Driving aids Ministamp pedal extension Pedal extension of 3 . quick release model The floor mounted unit has a pedal guard for the original accelerator pedal and a quick release for easy removal.10“) with foot platform.9 cm (1” . Menox Stamp pedal. flip-up model 102044 NEW Left Foot Accelerator. manual gear box (3 pedals) 102047 102048 NEW Stamp pedal extension Pedal extension of 10 . article no. article no.30 cm (4” . manual gear box (3 pedals) 102049 102050 NEW Left Foot Accelerator. article no. Menox Ministamp. quick release model 102045 NEW Pedal Guard Pedal guard with quick release for easy removal.3“). automatic gear box (2-pedals) Menox Ministamp. Left Foot Accelerator pedal. NEW Pedal Guard 102046 39 . Hedeforsväg PHONE: +46 en 6. Stroke maximum 50 mm. article no.autoada 29 pt.558 20 FAX: +46 (0)302 Sweden oadapt. 40 mm NOTE! This product is NOT CE marked! 100533 100762 Art. mounted inside or under the vehicle.. 443 61 (0)302 Stenkullen.. The mounting brackets are coated in a dark grey and all hardware is included as well as mounting instructions. No: 101194 RHD Art. Please consult the Autoadapt DealerWeb for updated information on what vehicle specific brackets we have available.se .com Carospeed mounting bracket for Volvo V70 Carospeed mounting bracket work piece This mounting bracket work piece has to be adapted for each specific vehicle. Carobrake pulls the original parking brake wire of the vehicle. Delivered uncoated. The mounting bracket fits both the Carospeed Classic and the Carospeed Menox hand controls Carospeed mounting bracket work piece article no. 40 mm tube. No: 416 446 Carospeed vehicle specific mounting brackets Vehicle year from 01 Vol vo V70 LHD Art. 1 Autoadapt AB. Wire length 700 mm. The handle is made of soft black plastic foam. E-MAIL: contact@aut. Carospeed universal mounting bracket 100748 40 . No: 101195 The specific mounting brackets fit both the Carospeed Classic and the Carospeed Menox hand controls.and 35 mm tube Parking Brake Release.. 35 mm Parking Brake Release. Carobrake 700 101845 Parking Brake Release The Parking Brake Release is available in two pipe dimensions: tube diameters 35 mm and 40 mm.Driving aid options Carobrake IP66 Carobrake pulls the parking brake with a power of up to 170 kg via an actuator.558 WEB: www.. article no. . Wheelchair stowing solutions Carolift docking devices The Carolift docking devices are ordered separately. 101147 Claw and T-bar For folded manual wheelchairs placed horizontal Max 25 kg. 101148 101149 Claw and T-bar For power chairs/scooters without the seat. Pulley Can only be used with Carolift 90 or 140. Max 90 kg. C-arm and T-bar For power chairs/scooters with seat. Choose a docking device suitable for the type of wheelchair that shall be used. 100621 101666 101667 101518 Clamping claw For folded manual wheelchairs placed vertical. 101150 41 . 101666 (90 kg) and 101667 (140 kg) Carony docking device Specially designed for Carony wheel units. Max 180 kg. The loop For manual wheelchairs. Lift capacity 25 Kg. Max 25 kg. ..... thus placing the wheelchair in a centered position inside the vehicle...... maximum.... maximum... 795 B = From cc pillar to lift belt...... minimum..Wheelchair stowing solutions 2-point lift belt For all types of wheelchairs up to 90 kg............................... minimum...... The hoist is delivered with a universal mounting base.......... 1380 mm mm mm mm mm mm 42 . Carolift 40 B 101663 A D C A = From cc pillar to lift belt.......... article no.............. bypass wide bumpers or to be picked up from the pavement beside the vehicle. 101151 4-point lift belt For all types of wheelchairs up to 180 kg. 530 C = From hoist arm bottom edge to vehicle floor. The docking device is ordered separately. This feature enables the wheelchair to pass through narrow door openings.. making it easier to fold down and lift up the hoist. NEW: Now with gas spring. Manual rotation and powered lifting/lowering.............. The hoist arm is bendable both ways... 875 Total height.. 755 D = Total height................... 655 Length of lift belt........ which is operated by a switch on top of the hoist....... 101152 Carolift 40 Lift capacity 40 kg...... designed to fit in a sedan vehicle.5 cm .82cm 43 . Carolift ASL 325 101626 The ASL-325 taken apart: A= Total height over vehicle floor: 94. there are two pieces that can be placed anywhere inside the vehicle. The hoist is mainly intended for a power wheelchair or scooter with removed seat. The hoist is delivered with a mounting base. Manual rotation and powered lifting/lowering which is operated by controls on top of the hoist. The docking device is ordered separately. The heaviest weighs about 6 kg. article no.Wheelchair stowing solutions Carolift ASL 325 Lift capacity 82 kg. Carolift ASL 325 is a take-apart hoist. Taken apart.105 cm C B A B= From upper visual end of lift belt to vehicle floor: 81cm .92cm C= From lift belt to pillar: 62cm . article no.Wheelchair stowing solutions Carolift 90 Lift capacity 90 kg. Suitable for station wagons. The docking device is ordered separately.4 cm C= Min: 84 cm. B= 87 cm. Carolift VSL 900 101633 A= Min: 103 cm. Max: 149 cm B= Min: 134. The hoist is delivered with a universal mounting base. minivans or full-size vans. The hoist has powered functions for lifting/lowering and swivelling out and in. All movements are powered. C= Max 138 cm folded D= Max 59 cm Carolift VSL 900 Lift capacity 91 kg. The docking device is ordered separately. Height and length adjusted by cutting. Length adjusted by cutting. Max: 152. Height adjusted by cutting. Max: 115 cm 44 . The hoist slides along the vehicle floor via rails and loads the wheelchair/scooter through the vehicle side entry. article no. Carolift 90 100297 A= 108 cm including mounting base.5 cm. Suitable for station wagons. left Universal mounting base Specific mounting base 101873 101874 101889 refer to DealerWeb A 60cm . Carolift 140 101018 A= 105 cm including mounting base. 45 .99cm D 54cm Lift belt at maximum A: 110cm Lift belt at minimum A: 141cm *Drill an extra hole and cut. The length of hoist arm is adjusted by cutting. The hoist is height adjusted by cutting (down to 74 cm).83cm B 86cm (76*) .104cm C 81cm . Height and length adjusted by cutting. right Carolift VSL 570.Wheelchair stowing solutions Carolift 140 Lift capacity 140 kg. Carolift VSL 570. The hoist has powered functions for lifting/lowering and swivelling out and in.5 cm. C= Max 134 cm folded D= Max 62 cm Carolift VSL 570 Lift capacity 181 kg. The Carolift 570 has an off-set arm and differs from the Carolift 6000 by the manual rotation. The hoist is delivered with a universal mounting base. article no. For MPV vehicles and minivans. The docking device is ordered separately article no. minivans or full-size vans. B= 82. The docking device is ordered separately. The lifting/lowering is powered. 104cm 81cm (71*) . (for narrow door openings or wide bumpers) Universal mounting base Specific mounting base 101889 refer to DealerWeb 6000 6900 A 60cm . Installation Carolift Carolift Carolift Carolift 6000 6000 6900 6900 right side left side (UK) right side left side (UK) article no. The rotation limit can be adjusted 360˚.98cm C 81cm . Carolift 6000 The docking device is ordered separately. **Including 20 cm telescoping extension. 101629 101630 101631 101632 Carolift 6900 has a 20 cm retractable hoist head. and so is the angle and length of the hoist head.83cm** B 86cm (76*) . The off-set hoist arm allows the mobility device to be picked up from the side of the vehicle.88cm D 54cm 53 cm Lift belt at maximum A: 110cm Lift belt at minimum A: 141cm *Drill an extra hole and cut. This feature also enables installations in Estate wagons with sloping rear doors. The rotation.99cm 71cm .83cm 63cm .Wheelchair stowing solutions Carolift 6000 and 6900 Lift capacity 181 kg. 46 . Both hoists have a fold-down hoist head. lifting and lowering are powered. The height is adjustable. The 6900 has a 20 cm retractable hoist head. Inside edge of door sill to middle seats. For information on the vehicle specific mounting kits available please consult the Autoadapt DealerWeb for the latest updates. F 33 cm max. E 114 cm min. The platform can also take 3-axis wheelchairs. Included in the Joey Lift order are: securement belts (as shown in the Joey lift picture to the left). B 112 cm min. Inside edge of door sill to outside edge of bumper. The Joey Hardwire is mounted in the third row seat pockets. 47 . Lifting Capacity: 159 kg A 102 cm min. Floor ceiling and/or height of cargo opening for Joey tower only. D 69 cm max. Floor of van to ground. when available. Platform size 69 cm x 112 cm. article no. Sill height. Joey Hardwire Retractable belts 3 retractable belts and under seat docking bar. Between wheel housings and/or width of cargo opening for the Joey platform only (if less. C 5 cm max. transport fittings to be mounted under the seat. Additional clearence may be required for scooter/ wheelchair.Wheelchair stowing solutions Joey Hardwire Lift capacity 159 kg. Overall Length: 115 cm Overall width: 112 cm Overall height: 97 cm Unit weight: 75 kg Platform Size: 69 cm x 112 cm Max. 101854 101488 101678 Universal mounting kit Joey Option: Retractable belts. Please note that these belts add a couple of cm between Joey and the rear door. platform can be cut). and in the centre fixing point by the threshold. .127 cm Height (B):. 47 cm Height opened (C):................................................................ 2 ..........Wheelchair stowing solutions Roof Spider Roof Spider picks up the folded manual wheelchair from both sides of the vehicle..5 cm B) 114 cm C) 120 cm D) Height from x up to the lid: 35 cm Length (A):........................................... article no................................................ 120 cm Weight:...............5 mA Power consumption with lid opened: 60 mA Power consumption in operation:......Automatic fuse 10 A A C C B A D D B 48 ... measured from the roof rack..... Roof Spider weighs 54 kg and has a low profile of 47 cm. Roof Spider 101512 A) From lifting device to lock box: 82......12 A Fuse:.12 V Power consumption with lid closed: 4................ 25 kg Voltage:........................ 54 kg Maximum load:.......................................... 110 cm Maximum vertical travel from bottom of roof box (D)................... 230 cm Width:................... Medium and Large Careva Combination Kit The Careva Combination Kit is a complete package. Please check with our Customer Support Centre if you have special requirements. The belt system comprises a Spinal Belt which is fastened vertically over the backrest. The Spinal Belt is available in a wide or a narrow version (depending on body size). Please note that the Careva system does not replace the vehicle safety belt! The Combination Kit is available in sizes Small. 2 buckles) Spinal Belt (5 grooves. Small Combination Kit (3 .14 years) Large Combination Kit (14 . The postural belt is then installed in the grooves of the Spinal Belt. is installed. article no. Spinal Belt (5 grooves.adult) 101670 101671 101672 The Careva Spinal Belt The Spinal Belt is fastened vertically over the backrest and contains five grooves. article no. 2 buckles for S = 3-7 years) 100955 101374 49 .Belts The Careva postural belt system Careva postural belts are very helpful for people who need extra support when seated in a vehicle seat or in a wheelchair. which consists of the Spinal Belt with five grooves in which a Pelvic T-belt. in which the postural belts are mounted. combined with a Shoulder Harness.7 years) Medium Combination Kit (7 . point postural belts The webbing of the belts measures 40 mm article no.. 4-point belt 6-point belt 100422 100423 50 . The belt is originally designed as a backseat belt and is B e4 certified. front fastening (S) Pelvic T-belt. 100968 100587 100969 NEW 2-point belt The 2-point belt is fastened in the seat of a wheelchair to serve as a postural belt.Belts The Careva Thoracic Belt The Careva Thoracic Belt is fitted in the upper groove of the Spinal Belt to support the upper body. front fastening (L) 20 cm 30 cm 40 cm crotch of T-belt 50 cm 65 cm 80 cm article no.10 cm 100958 = 100 cm +/. article no. 2-point belt 100425 4. Measure around the chest to determine the size of the Thoracic Belt 100959 = 80 cm +/.and 6.and so on Thoracic Thoracic Thoracic Thoracic Belt Belt Belt Belt 80 cm long 100 cm long 120 cm long 135 cm long 100959 100958 100957 100590 The Careva Pelvic T-belt The Careva Pelvic T-belt is fitted in the Spinal Belt and prevents the lower body to slide forward in the seat. Pelvic T-belt with front fastening padded part Pelvic T-belt. article no.. front fastening (M) Pelvic T-belt.10 cm . article no. Seatbelt grip 100786 51 . long holder Female buckle. Suitable for drivers who need a more stable position in the seat. flexible. article no. The CG-lock is originally design for racing drivers. Belt deflection Belt deflection 100681 Release handle CG-lock The CG-lock is fastened to the seatbelt buckle. short holder 100162 102122 102123 102124 Belt deflection The belt deflection keeps the diagonal belt correctly positioned over the shoulder of a short person. Autoadapt XL Belt Female buckle.Belts NEW Autoadapt XL-Belt e17 The Autoadapt XL-Belt is a 3-point belt that is crash tested and classified according to E17. for the purpose of locking the pelvic (horizontal) part of the seatbelt tightly to the hips. article no. CG-lock 102156 The CG-lock NEW Seatbelt grip NEW The seatbelt grip makes it easier to reach the seatbelt buckle by the B-pillar. article no. short holder Female buckle. The Carosafe is designed to be easily adjusted for different types of power wheelchairs. Carosafe II universal wheelchair lock 101846 Emergency release DriveLOC Wheelchair securement. with a minimum of sway. DriveLOC 101840 DriveLOC/UniLOC docking plates DriveLOC/UniLOC Universal Docking plate Docking plate to be fixed under the wheelchair in order to adapt it for DriveLOC. (Not needed for the Carony Drive) article no. (UniLOC should be fastened in 4 anchor points with reinforcement washers under the vehicle floor) NEW UniLOC UniLOC Installation kit article no. 101686 102130 52 . article no. Emergency release.Wheelchair securements Emergency release Carosafe II universal wheelchair lock Carosafe II is powered and keeps the wheelchair steady. Emergency release. The UniLOC has been tested with a 140 Kg power wheelchair in a 20G Dynamic test. article no. switch button and a light indicating locked and unlocked position. DriveLOC can also be used for some other power wheelchairs if the universal docking plate is used. It has also been tested according to ISO 10542-1. delivered with wire harness. DriveLOC/UniLOC Universal docking plate (for an unspecified power wheelchair) 101881 101841 DriveLOC Docking plate for Carony Go DriveLOC docking plate for Carony Go UniLOC UniLOC is a universal wheelchair lock. specially designed for the Carony Drive (or the Carony Go). UniLOC is equipped with emergency release. It is very suitable for people who drive the vehicle while seated in a wheelchair. Transport securement 100004 53 . As emergency back-up there is a metal wire to pull for unlocking it. article no. The securement is electrically operated.Wheelchair securements Transport securement for wheelchairs The transport securement is only designed for securing just the wheelchair and not for a wheelchair with occupant. article no. the Joey.85 MHz. The Hatch can still be manually opened. The Universal Wireless Remote Control (see page 46) is available as option. Frequency: 869. suitably placed close to the driver. The cylinder stroke length is 600 mm. the vehicle door or other 2-way electrical products. for products such as the Pneumatic Hatch Opener. The Pneumatic Hatch Opener is delivered complete with a universal bracket for fitting it into the vehicle.Various aids Pneumatic Hatch Opener The Pneumatic Hatch Opener is operated by a switch. which is integrated into the pneumatic system. article no. Universal Wireless Remote Control 101865 54 . Pneumatic Hatch Opener Hatch Lock Opener Safety switch (to interact in combination with a ramp) 101683 101684 102060 Pneumatic Hatch Opener The Hatch Lock Opener as option Universal Wireless Remote Control A key-ring size transmitter and a 2-way receiver. For vehicles without an electric hatch lock you can order the Hatch Lock Opener. 55 . se www. Autoadapt reserves the right for alterations without previous notice.fr www. edition 3 Art.uk Autoadapt´s Mission is to be a leading global provider of vehicle adaptation solutions for persons with reduced or limited mobility.de www.autoadapt.autoadapt.Art.co.se Autoadapt AB Åkerivägen 7.autoadapt. No: 420069 Autoadapt Customer Support Centre Tel: +46 302 25440 Fax: +46 302 25407 E-mail:
[email protected]: 420069. Illustrations.com www.se www.autoadapt. © 2009 Autoadapt AB . descriptions and specifications in this catalogue are based on current product information.autoadapt. S-443 61 Stenkullen Sweden Tel: +46 302 254 00 Fax: +46 302 25407 E-mail: contact@autoadapt.