NNM - Accedian NID Module Manual v.2012.1

March 27, 2018 | Author: Ketut Widya | Category: Multiprotocol Label Switching, Quality Of Service, Computer Network, Menu (Computing), Provisioning
Share
Report this link


Comments



Description

adNetkaView Network Manager Accedian NID Module Manual Version 2012.1, Mar 2012 Part No. : NNM-D026 221/2 Moo 12 Ramkhamhaeng 166 Rd., Khwang Minburi, Khet Minburi, Bangkok 10510 Tel: 662 978 6805  Fax: 662 978 6909 www.netkasystem.com ©2012 Netka System Co.,Ltd. Netka System Co.,Ltd. NetkaView Network Manager Accedian NID Module - Manual Disclaimers INFORMATION, FIGURES IN THIS DOCUMENT ARE THE PROPERTY OF NETKA SYSTEM CO.,LTD. NONE HAS A RIGHT TO COPY, DISTRIBUTE, TRANSFER, DISCLOSE OR MODIFY ANY PART OF THIS DOCUMENT WITHOUT THE COMPANY’S FORMAL WRITTEN CONSENT. THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATIONS OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKAGE SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR NETKA REPRESENTATIVE FOR A COPY. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. NETKA DISCLAIMS ALL WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL NETKA OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF NETKA OR ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 2 NetkaView Network Manager Accedian NID Module - Manual | Netka System Co.,Ltd. NetkaView Network Manager Accedian NID Module - Manual Table of Content 1.  Overview .....................................................................................................................................8  1.1  About This Manual ..........................................................................................................8  1.2  Product Overview ............................................................................................................8  1.3  Product Features ..............................................................................................................8  Getting Started .........................................................................................................................12  2.1  Prerequisite ....................................................................................................................12  2.2  Log-in to the System ......................................................................................................12  2.3  Welcome Page ................................................................................................................12  2.3.1  Announcement Messages.........................................................................................13  2.3.2  Chat-Window ...........................................................................................................13  2.3.3  Shortcut Menus ........................................................................................................13  2.4  Control Menu .................................................................................................................13  2.5  Site Map ..........................................................................................................................14  2.6  Announcement Message Rotator ..................................................................................15  2.7  Breadcrumb....................................................................................................................16  2.8  Instant Messaging ..........................................................................................................16  2.9  Online Help.....................................................................................................................16  2.10  Data Import Tool ...........................................................................................................17  2.11  Password Change ...........................................................................................................19  2.12  System Log-out...............................................................................................................19  2.13  Grid Feature ...................................................................................................................19  2.14  Report Exporting ...........................................................................................................20  2.15  Diagram Zooming Panel ...............................................................................................21  2.16  Graph Zooming ..............................................................................................................22  2.17  Graph Type Change ......................................................................................................23  Installation ................................................................................................................................24  3.1  For Web & Polling Server.............................................................................................24  3.2  For Web Server ..............................................................................................................25  3.3  For Polling Server ..........................................................................................................27  Provisioning ..............................................................................................................................30  4.1  PAA Test Provisioning ..................................................................................................30  4.1.1  How to open PAA Test Provisioning.......................................................................30  4.1.2  How to configure PAA Test Provisioning ...............................................................30  4.1.3  How to View the PAA Test Provisioning Report ....................................................40  4.2  RFC-2544 Throughput Test Provisioning ...................................................................42  4.2.1  How to open RFC-2544 Test Provisioning ..............................................................42  4.2.2  How to configure RFC-2544 Test Provisioning ......................................................43  4.2.3  How to View the RFC-2544 Test Provisioning Report ...........................................51  Monitoring ................................................................................................................................53  5.1  PAA Status View ............................................................................................................53  5.1.1  How to use PAA Status View ..................................................................................53  5.2  PAA Statistic View .........................................................................................................54  2.  3.  4.  5.  3 NetkaView Network Manager Accedian NID Module - Manual | Netka System Co.,Ltd. NetkaView Network Manager Accedian NID Module - Manual 6.  5.2.1  How to Open PAA Statistic View ...........................................................................54  5.2.2  How to Export PAA Statistic View .........................................................................56  5.2.3  How to Create PAA Statistic View Profile ..............................................................56  5.2.4  How to Edit PAA Statistic View Profile..................................................................57  5.2.5  How to Delete PAA Statistic View Profile ..............................................................57  Report........................................................................................................................................59  6.1  Overview .........................................................................................................................59  6.2  Accedian Report.............................................................................................................59  6.2.1  PAA Statistic Everyday Report ...............................................................................60  6.2.1.1  How to See PAA Statistic Everyday Report ................................................60  6.2.1.2  How to Export PAA Statistic Everyday Report...........................................61  6.2.2  PAA Statistic Matrix Report ....................................................................................61  6.2.2.1  How to See PAA Statistic Matrix Report ....................................................62  6.2.2.2  How to export PAA Statistic Matrix Report ................................................63  6.2.3  PAA Statistic Summary Report ...............................................................................63  6.2.3.1  How to see PAA Statistic Summary Report ................................................66  6.2.3.2  How to export PAA Statistic Summary Report ...........................................67  6.2.4  PAA Reachability Report ........................................................................................67  6.2.4.1  How to see PAA Reachability Report .........................................................68  6.2.4.2  How to export PAA Reachability Report ....................................................69  6.2.5  PAA Response Time Report ....................................................................................69  6.2.5.1  How to see PAA Response Time Report .....................................................70  6.2.5.2  How to export PAA Response Time Report ................................................71  6.2.6  PAA Packet Loss Report .........................................................................................71  6.2.6.1  How to see PAA Packet Loss Report ..........................................................72  6.2.6.2  How to export PAA Packet Loss Report .....................................................73  6.2.7  PAA Latency Report ................................................................................................73  6.2.7.1  How to see PAA Latency Report.................................................................74  6.2.7.2  How to export PAA Latency Report............................................................74  6.2.8  PAA Jitter Report.....................................................................................................75  6.2.8.1  How to see PAA Jitter Report .....................................................................76  6.2.8.2  How to export PAA Jitter Report ................................................................76  6.2.9  PAA Status Summary Report ..................................................................................77  6.2.9.1  How to see PAA Status Summary Report ...................................................78  6.2.9.2  How to export PAA Jitter Report ................................................................79  6.2.10 PAA Status Report ...................................................................................................79  6.2.10.1  How to see PAA Status Report ..................................................................81  6.2.10.2  How to export PAA Status Report.............................................................82  6.2.11 RFC-2544 Throughput Test Report .........................................................................82  6.2.11.1  How to see RFC-2544 Throughput Test Report ........................................83  6.2.11.2  How to export RFC-2544 Throughput Test Report ...................................84  4 NetkaView Network Manager Accedian NID Module - Manual | Netka System Co.,Ltd. .................................... 20  Report Utility Panel .......................................................... 15  Site Map Menu ................ 45  VLAN Header Configuration ....... 43  PAA Test Provisioning – PAA Configuration ................................................ 19  Column Header Grid ................. 22  Graph Type Change .........NetkaView Network Manager Accedian NID Module .................................................................................................... 15  Announcement Message Rotator Button .................................................................... 42  RFC-2544 Throughput Test Provisioning – Start Page ................................ 45  Flow Configuration ............... 48  5 NetkaView Network Manager Accedian NID Module ....................................................... 17  Online Help Button ....................................................................................................................... 19  Grid Scrolling Panel...... 19  Report Page .......................................................................................................................................................... 39  PAA Test Provisioning – Deploy .................................................................................................. 21  Diagram Zooming Panel ....................................................................................................................................................................................... 15  Announcement Message Rotator ............................................................................................................................................................. 31  PAA Test Provisioning – PAA Configuration (Layer-2 PAA)............................................ 32  PAA Test Provisioning – Configuration Job list ................................................................................................................................................... 13  Announcement Message .............................................................................................................................................................................................................................................................................................................................................Manual | Netka System Co.................................................................... 18  Data which will be imported .................................. 21  Zoom...................................................................................................................... 16  Instant Messaging Window ...................................................................................................................................................... 43  Layer-2 Packet Header Configuration ................................ 30  PAA Test Provisioning – PAA Configuration .......................................................................................... 35  Optional PAA Advanced Configuration (Common Parameters) ....................................................................................................... 41  RFC-2544 Test Generator ........................... 32  PAA Test Provisioning – Otional PAA Advanced Configuration ................................ .............................................In Graph ............................................................................................................................................................... 37  PAA Test Provisioning – Generate Config .................................................................................Manual Table of Figures Figure 1  Figure 2  Figure 3  Figure 4  Figure 5  Figure 6  Figure 7  Figure 8  Figure 9  Figure 10  Figure 11  Figure 12  Figure 13  Figure 14  Figure 15  Figure 16  Figure 17  Figure 18  Figure 19  Figure 20  Figure 21  Figure 22  Figure 23  Figure 24  Figure 25  Figure 26  Figure 27  Figure 28  Figure 29  Figure 30  Figure 31  Figure 32  Figure 33  Figure 34  Figure 35  Figure 36  Figure 37  Figure 38  Figure 39  Figure 40  Figure 41  Figure 42  Figure 43  Figure 44  Figure 45  Figure 46  Figure 47  Figure 48  Figure 49  Figure 50  Welcome page ........................ 16  Instant Messaging Button .............................................................................................................................................................................................................................. 34  Otional PAA Advanced Configuration (UDP PAA) ......................................................................................................................................................................................................................... 16  Online Help Window .................................................. 18  Data Import Tool Button......................................................................................... 13  Main Menu of NNM Web ................................................................................................. 16  Breadcrumb Button .......................... 18  Password Change Page ...................... 21  Export Tool ......................................................................................... 44  Layer-3 Packet Header Configuration .................................................................................................................................. 14  Site Map ........................................................ 13  Chat Window ...................................................................................................... 39  PAA Test Provisioning Report .... 46  Create New Regulator Configuration ...................................................... 14  Sub-Menus of a Monitoring Menu .................................................................................................................................................... 17  Data Import Tool .......................................... 23  PAA Test Provisioning Start Page ................................................................... 18  Sample data in Microsoft Excel which will be imported .................................................................................................................................... 22  Zoom-Out Graph ................ 15  Breadcrumb............................................... 41  PAA Test Provisioning – View Detail Configuration .................Ltd....................................................... 33  Optional PAA Advanced Configuration (Layer-2 PAA)...... 32  PAA Test Provisioning – PAA Configuration (UDP PAA) ............................................... ........................................................................................... 68  PAA Response Time Report ................................................................................................................................... 52  PAA Status View .............................. 73  Sample PAA Latency Report ................................. 55  PAA Statistic View – Modifying threshold value .................................... 50  RFC-2544 Test Provisioning Report ........... 72  PAA Latency Report........................... ....................... 56  PAA Statistic View – Edit Profile .................................................................................................... 83  Sample RFC-2544 Throughput Test Report (Summary) ......................................................... 65  Sample PAA Statistic Summary Report .............................................................Ltd...................... 49  RFC-2544 Test Provisioning – Generate Config .................. 55  PAA Statistic View – Graph Page ......................... 60  Sample PAA Statistic Everyday Report ................... 83  Sample RFC-2544 Throughput Test Report – Traffic Flow Detail ..........................................................................................Manual Figure 51  Figure 52  Figure 53  Figure 54  Figure 55  Figure 56  Figure 57  Figure 58  Figure 59  Figure 60  Figure 61  Figure 62  Figure 63  Figure 64  Figure 65  Figure 66  Figure 67  Figure 68  Figure 69  Figure 70  Figure 71  Figure 72  Figure 73  Figure 74  Figure 75  Figure 76  Figure 77  Figure 78  Figure 79  Figure 80  Figure 81  Figure 82  Figure 83  Figure 84  Figure 85  Figure 86  Figure 87  Figure 88  Figure 89  RFC-2544 Test Provisioning – Configuration Job list ................................................................................................................................................................................................................................................................ 78  Sample PAA Status Summary Report ................................................................................................................................................................. 50  RFC-2544 Test Provisioning – Deploy ..................................................................... 55  PAA Statistic View – Summary Page................... 82  RFC-2544 Throughput Test Report (Summary) ....................................................... 80  PAA Status Report (Hourly) .......... 69  Sample PAA Response Time Report .............................................Manual | Netka System Co............................................................................................................................................................................NetkaView Network Manager Accedian NID Module ............ 79  PAA Status Report (Daily) .. 59  PAA Statistic Everyday Report ....................................................... 61  PAA Matrix Report............ 81  Sample PAA Status Report .................. 67  Sample PAA Reachability Report ....................................................................................................................... 62  Sample PAA Statistic Matrix Report . 53  PAA Statistic View – Load Profile Page ........................................................................................................................................................................................... 56  PAA Statistic View – Create Profile... 64  PAA Statistic Summary Report (cont...................................................................................................................................................................................................................................................................................).......................................................................... 52  RFC-2544 Test Provisioning – View Detail Configuration........................................................ 57  Main Report Menu ...................................... 84  6 NetkaView Network Manager Accedian NID Module ...................................................................................................... 71  Sample PAA Packet Loss Report ............................................. 76  PAA Status Summary Report ............................................ 80  PAA Status Report (5 minute) .......................................................................................................................... 63  PAA Statistic Summary Report ..................... 74  PAA Jitter Report .................................................................... 66  PAA Reachability Report ................................................................ 75  Sample PAA Jitter Report..................... 70  PAA Packet Loss Report ................................................................................................................................................................................................................................................................................................................................... 49  PAA Test State Description .............................................................................. 22  Layer-2 PAA Advanced Configuration Parameters Description .................................................Manual Table of Tables Table 1  Table 2  Table 3  Table 4  Table 5  Table 6  Table 7  Table 8  Table 9  Table 10  Table 11  Table 12  Table 13  Table 14  Table 15  Table 16  Table 17  Table 18  Table 19  NetkaView Network Manager Feature .............................. 38  Traffic Generator Layer-2 Packet Header Parameters Description .............. 22  Graph Zooming .... 59  PAA Test State Description ...................... 77  PAA Test Status Description ...............Manual | Netka System Co........... 45  Traffic Generator Layer-3 Header Parameters Description .................................................... 45  Traffic Generator VLAN Header Parameters Description .................................................................................................................................................................................................................... 20  Report Utility Panel Description.................. 36  PAA Advanced Configuration Parameter Description ..................................................................................... 46  Traffic Generator Flow Parameters Description ................................................................................................................... ...................................... 11  Report Utility Panel Description...............................................................Ltd............................................NetkaView Network Manager Accedian NID Module ......................................... 54  PAA Test Status Description ................. 10  NetkaView Network Manager Module Feature ..................................................................................................................................................... 48  Regulator Configuration Description................................................................................................................................................................................. 78  7 NetkaView Network Manager Accedian NID Module ........................ 34  UDP PAA Advanced Configuration Parameter Description ....... 21  Diagram Zooming Panel Description ................. 54  Main Report Menu .................................................................................................................... NetkaView® Network Manager can manage multi-vendor IP devices with SNMP. NetFlow. link performance. Cisco SCE. sFlow. Visio Diagram. IP SLA. For service provider. how to monitor test statistic and how to generate Statistic reports. The manual describes a product overview. All data will be stored in database (RDBMS). access point. geographic (location).Multipage PAA test result real-time monitoring with profile setup PAA test results and reports include:  PAA Statistic Everyday Report  PAA Statistic Matrix Report 8 NetkaView Network Manager Accedian NID Module . Plug-in modules i. Telnet. you can create portal based on your customer links to allow your customer to monitor and export their usage reports by themselves. With powerful web portal which include in the product. Overview 1.3 Product Features Features of NetkaView Network Manager Accedian NID Module (NNMACD) are as follow:   PAA Status View – All PAA state and status monitoring view PAA Statistic View . Working Hour. Accedian.1 About This Manual This user manual provides instructions in using NetkaView Network Manager Accedian NID Module (NNMACD). Cisco ACS module. traffic utilization. you will get additional features with pay as per your demand. product features. NNM provide customer reports including availability.Manual 1. network. switch. QoS. BRAS.NetkaView Network Manager Accedian NID Module . ICMP protocol. You can access to manage your network via web browser from anywhere in client-server mode with centralized management. With many plug-in modules. 1. Accounting. NNM is able to manage SNMP-enabled network element including router. Alert & Escalation. This manual consists of the following chapters:       Overview (this chapter) Getting Started Installation Provisioning Monitoring Reports 1. user level. Performance and Security management (FCAPS) for IP network with robust and fast responsiveness.Ltd. SSH. MPLS. IPS. NetFlow. PAA and wireless. you can create many web portals based on VPN. carrier-grade network management software provides Fault. how to provision for testing. Customer. . NBAR.2 Product Overview NetkaView® Network Manager (NNM). OID Monitoring.e. MPLS Traffic Engineering. how to install. Configuration. application usage. Google Map. NBAR. how to access a system.Manual | Netka System Co. NetkaView® Network Manager provide total network management solution which can manage multi-technology including MPLS VPN. IP SLA. DSLAM. Wireless. firewall. QoS.. Manual | Netka System Co.Manual      PAA Statistic Summary Report  PAA Reachability Report  PAA Response Time Report  PAA Packet Loss Report (both directions)  PAA Latency Report (both directions)  PAA Jitter Report (both directions)  PAA Status Summary Report  PAA Status Report Alert via email. . This depends on a system administrator’s policy.Ltd. please contact your system administrator. If you need to use any features which you can not view but appeared in this manual. 9 NetkaView Network Manager Accedian NID Module . sms when PAA test over threshold PAA test provisioning tool RFC-2544 throughput test provisioning tool RFC-2544 throughput test result and report Please be noted that each user may view a different menu.. The following table lists feature of NetkaView Network Manager version 2012.1.NetkaView Network Manager Accedian NID Module . LAN. Error.CDP. Broadcast (pps)    Theme Color Changing    Instant Messaging and News    Online Help. CPU.BDCOM only CE1. Error. %)    Interface Error / Discard Rate (pps)    Interface Unicast / Multicast / Broadcast / Non-Unicast Reate (pps)    Inventory (Product. Memory Utilization  Log Parser / Automated Log Collector and Parser with Scheduler  IP Address and VLAN Allocation  Access Control List Provisioning  Cisco. Extreme only Unliminted User / Unlimited Session / Unlimited GUI Access    Web Portal by User Level (privilege)    Web Portal by Geographic    Web Portal by Network    Multi-Page Traffic/Packet/CPU/Memory Utilization Real-Time Monitoring    Node Round Trip Time / Interface Statistic Real-Time Monitoring    Executive View    Percentile Traffic Report    Multi Admin Level and Privilege    Connection Path    Require LLDP.Extreme only Configuration Deployment / Configuration Restoring    Cisco. Extreme only ARP. Memory. .CDP.Foundry. Discard    TopN Input/Output Unicast (pps).CDP. excel    Historical Data with RDBMS    Sub-Interface and VLAN Performance Report    NE MIB must support Web Access Statistic Report    Report View / Export Statistic Report    Setup (Add/Edit/Delete) Log Report    Customize report by Crystal Report    Configuration Backup / View / Search / Comparison    Cisco. Extreme only Allow VLAN Provisioning  IOS Upgrading  Cisco. End Device)    Require LLDP.FDP.FDP. Multicast (pps). GE. Model. Forwarding. Traffic. Routing Table Report    Require BRIDGE-MIB Connection List (WAN.H3C.Ltd.Extreme. word. add work log & attachment for each event)   Root Cause Analysis   Alert Rule for Incomming Syslog and Trap (alert via email / sms)   Live Graph (CPU. html. Viewer and Report   Event Filtering / Suppression / Correlation / Auto Clearing / Holding / Escalation   Event Template / Action Rule   Event Journal (create trouble ticket. Memory Utilization (%)    TopN Input/Output Traffic (bps. Viewer and Report   Trap Receiver.H3C. Hop Statistic Report    VLAN Access / Trunk Report    Cisco. FE Usage Summary    Cisco. %).Juniper. xml. Extreme only Digital Optical Monitoring (DOM) Statistic (Tx/Rx Power. Breadcumb and Data Import Tool    Automatic Database Rotation / Archiving    Environment Status    Cisco only Temperature Monitoring / Report    Cisco only VLAN Access Port and Trunk Port Provisioning Tool    Cisco only Interface Provisioning Tool (configuring description. Description)    ENTITY-MIB TE. Tx/Rx Loss.NetkaView Network Manager Accedian NID Module . specific OID)  Trend Analysis Report  Auto Report Generator  Combined/Virtual Interface Report  Heat Chart for Traffic.Extreme only Web Ping / Trace Tool    Alarm Threshold for CPU Utilization    Alarm Threshold for Memory Utilization    Alarm Threshold for Interface Utilization. csv.Manual Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 Description SE PE EE Remark Network Topology Map    Support LLDP.Juniper..E1 Usage Summary and CE1 Time-Slot Usage Summary    Cisco only Web Command Line Tool    Cisco.BRIDGE-MIB Ping Statistic.BRIDGE-MIB TopN CPU. Discard    Alarm Threshold for Spiked Traffic    Alert via Email / SMS / Syslog / SNMP Trap    Export to pdf.FDP.Manual | Netka System Co. Temperature)  Cisco only Table 1 NetkaView Network Manager Feature 10 NetkaView Network Manager Accedian NID Module . activate/deactivate port)    Event Summary View   Event View with syslog and trap   Syslog Server. Serial Number. Extreme only Automatic Node / Interface Discovery    Node / Interface Status    Node / Interface Availability    Node CPU / Memory Utilization    Require Enterprise MIB Interface Traffic Rate (bps.BRIDGE-MIB VLAN and Layer 2 Network Diagram    Cisco. HTTP. ICPIF) IP SLA Reaction with SNMP Trap IP SLA Alert Rule (Email / SMS) IP SLA IP SLA Profile and Reports IP SLA IP SLA Network Analysis IP SLA IP SLA Auto Report Generator IP SLA Web-Based OID Provisioning Test Tool OID OID Value Real-Time Monitoring OID OID Value Report with Graph OID OID Value Alet Rule (via Email / SMS / Trap / Syslog) OID OID Profile Setup / Monitoring / Report OID NetFlow Collector / Analyzer / Reporter NetFlow Scalable with distributed collectors and analyzers NetFlow Real Time Traffic / Application / Source / Dest monitoring by interface(s) NetFlow Real Time Traffic / Application / Dest / Domain monitoring by IP or subnet NetFlow Multipage real time monitoring with criteria(s) in your saved profiles NetFlow Various Flow Traffic Reports (Volume.Allied Telesyn. RTT. EnGenius. Reachability) Accedian NID PAA threshold alert (Email / SMS) Accedian NID PAA test provisioning Accedian NID RFC-2544 throughput test provisioning and report Accedian NID Wireless AP Executive View Wireless AP Wireless AP View Wireless AP Wireless AP Reports (associated client.CiscoDSLAM MIB Browser Tool MIB Browser 3rd Party Report 3rd Party Report Web Service northbound interface Web Service Remark Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco. Spiked Threshold) Alert Escalation Working Hour Profile and Reports Working Hour Visio Diagram with actual node / link status. TCP Connect. Extreme only Cisco. Speed. Juniper. DD-WRT only Cisco. Latency. RTT. Latency.Alcatel.Ltd. DD-WRT only Cisco. signal quality. sFlow. Juniper.Siemens.Manual Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 Description Module Web Portal for Customer Customer Customer Link Monitoring & Reports Customer Multi Customer Level and Privilege Customer News Announcement Customer Maintenance Mode Customer MPLS L3 VPN / MPLS TE / VPLS Fault Management MPLS MPLS L3 VPN Provisioning MPLS MPLS Traffic Engineering Tunnel Provisioning MPLS MetroLAN Service Provisioning MPLS MPLS VPN Diagram MPLS MPLS Traffic Engineering Tunnel Path Diagram MPLS VPLS Circuit Path Analysis MPLS Web Portal by VPN (VRF) MPLS Web VRF Command Line Tool / VRF Ping Tool / VRF Trace Tool MPLS Automatic VRF Interface Discovery MPLS CE Fault Management and Troubleshooting Tools MPLS Automatic Class-Map Discovery QoS QoS Rate by Class-Map / QoS Traffic Monitoring QoS QoS Policy Provisioning (Traffic Classification / Policing / Marking) QoS IP SLA Operation Provisioning (UDP. Packet Lost. require NetFlow Table 2 NetkaView Network Manager Module Feature 11 NetkaView Network Manager Accedian NID Module . FTP) IP SLA Multi-Page IP SLA Value Real-Time Monitoring IP SLA IP SLA Reports (Jitter. MOS. application usage) Wireless AP DSLAM Service Provisioning (Zyxel.Manual | Netka System Co. ICMP. Utilization. Extreme only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only Cisco only NetFlow v. Reachability. connected time) Wireless AP Wireless AP Reports (associated client vs traffic volume) Wireless AP Client Accounting Reports (volume. Juniper. bandwidth. rFlow only Require internet access Require internet access work with CSACS software work with CSACS software work with CSACS software work with CSACS software work with Cisco NAT Log work with Cisco SCMS CM work with Cisco SCMS CM work with Cisco CNR Accedian Network only Accedian Network only Accedian Network only Accedian Network only Accedian Network only Cisco. AS Group-to-Country (or vice versa) Traffic Report NetFlow Support NetFlow Traffic Sampling / Packet-Based Flow Sampling NetFlow NBAR Monitor and Report (Volume. Alert Profile Alert Escalation Node Alert Rule (Status. App Report) NetFlow Customer NetFlow Web Portal NetFlow Customer Customer mapping with interface or IP address NetFlow Customer Customer Multipage real time monitoring with criteria(s) in your saved profiles NetFlow Customer Various Flow Reports by App / DSCP / Domain / Country NetFlow Customer Domestic / International Traffic Report NetFlow Customer Unlimited Escalation Level Alert Escalation User Group.9. EnGenius. Utilization Threshold. Speed. DD-WRT only Cisco.Huawei.NetkaView Network Manager Accedian NID Module .5. . utilization and statistics Visio Diagram Google Map Network Diagram Google Map Google Map Profiles Google Map Real-Time Event Monitoring for Authentication / Authorization / Accounting CSACS Real-Time Monitoring for Failed Login / Active Login / Unauthorized Command CSACS Various Authentication / Authorization / Accounting reports CSACS Alert for Failed Login / Unauthorized Command / Prohibited IP address CSACS NAT Logging Reports Cisco NAT Logging Subscribes Usage Monitoring Dashboard Cisco SCE Subscriber Usage and Application Usage Report Cisco SCE DHCP Lease Reports Cisco CNR PAA Statistic Monitoring Accedian NID PAA Reports (Jitter. Utilization.. Packet) NetFlow Various Flow Reports by Source / Dest / App / DSCP / Domain / AS / Country NetFlow AS Group-to-AS Group. Extreme only Cisco. EnGenius only DD-WRT only. Packet Lost Threshold) Alert Escalation Interface Alert Rule (Status. EnGenius. Packet Lost. how to change your password and how to log-out from the system.Manual | Netka System Co. Open web-browser.3 Welcome Page The welcome page features include the followings:  Announcement message box  Chat window  Shortcut to the frequently-used menus 12 NetkaView Network Manager Accedian NID Module . 2. You will be redirected to the intial screen at welcome page if authentication succeeds. There is no need to install any software at customer’s machine.NetkaView Network Manager Accedian NID Module .2 Log-in to the System To log-in to the system.. 2. please make sure that you have the followings:  Username and password to access NNM. 2. Getting Started This chapter will describe how to log-in to the system. Enter url as http://server_ip/nksnms at web-browser. To use NetkaView Network Manager (NNM).Ltd. 2.  A computer or notebook/laptop with web-browser (Internet Explorer or Mozila Firefox). Enter username.1 Prerequisite User.  IP network connectivity to NNM Web-Server. .interface of NetkaView Network Manager (NNM) is a web-interface. please follow this procedure: 1. 3. Please contact the system administrator if you do not have them. 4.Manual 2. password and press ENTER. pop or all users. Only the users with administrative privileges are allowed to announce messages to the recipients in the specific zone. Figure 2 Announcement Message 2..3.NetkaView Network Manager Accedian NID Module . Simply type any message on the text-box and click the button or just press the ENTER key.Manual Figure 1 Welcome page 2.1 Announcement Messages The announcement messages are displayed on the welcome page. region. you can chat with those users who also log-in to a Chat window. Your messages will be immediately displayed on the chat-window of all those users who log-in to NNM at that time. so that you can see announcement messages or news from the administrator.3 Shortcut Menus The shortcut menus allow a user to quickly access the following frequently-used menus:       Admin Config (sub-menus included) Event View Monitoring (sub-menus included) Report Tool 2. The following figure shows the main menu of NNM web which consists of:     Home menu Diagram menu Monitoring menu Report menu Tool menu 13 NetkaView Network Manager Accedian NID Module . .2 Chat-Window When you log-in to NNM. Figure 3 Chat Window 2.Manual | Netka System Co.Ltd.3.4 Control Menu Most NNM control is menu style.3. 5 Site Map Site map lists all menus which reside in NetkaView Network Manager. 2. . if you need to use additional features. NNM will redirect you to the page that you selected. Please contact the system administrator. You can click each menu in site map to redirect to page that you want.NetkaView Network Manager Accedian NID Module . you will see the sub-menus. You can search page that want to go by input word in search text box and click Find button or click Find Next button to search next menu. The following figure shows the sub-menus of a Monitoring menu.Ltd.. Figure 5 Sub-Menus of a Monitoring Menu When you select each menu.Manual  Config menu  Admin menu  Log-out Figure 4 Main Menu of NNM Web Please be noted that you may not see some menus due to the system administrator’s policy. 14 NetkaView Network Manager Accedian NID Module .Manual | Netka System Co. When you move the pointer mouse to place above each menu. Ltd. just click at main menu bar.. place mouse at Home menu then click Site Map. Figure 9 Announcement Message Rotator Button 15 NetkaView Network Manager Accedian NID Module .NetkaView Network Manager Accedian NID Module . Figure 7 Site Map Menu 2.6 Announcement Message Rotator The announcement message rotator will be displayed under main menu bar to display message which administrator want to announce to users.Manual | Netka System Co. . Figure 8 Announcement Message Rotator To turn on or turn off announcement message rotator.Manual Figure 6 Site Map To open site map. The following figure show online help for Traffic Veiw. Figure 11 Breadcrumb Button 2. . NNM will display breadcrumb under main menu bar.Manual | Netka System Co.9 Online Help When you have any doubt on each page of NNM.NetkaView Network Manager Accedian NID Module . Figure 12 Instant Messaging Window To enable instant messaging window.Manual 2.7 Breadcrumb Breadcrumb is navigation aid which allows users to keep track of their locations in NNM.8 Instant Messaging NNM provide instant messaging to allow users can communicate each other in real-time. Figure 13 Instant Messaging Button 2.Ltd.. just click at main menu bar. you can see online help. 16 NetkaView Network Manager Accedian NID Module . just click at main menu bar. Figure 10 Breadcrumb To turn on or turn off breadcrumb. Manual Figure 14 Online Help Window To turn on online help. The following show sample Data Import Tool for zone data. just click at main menu bar. .Ltd.Manual | Netka System Co.10 Data Import Tool Data Import Tool help administrator to import data into NetkaView Network Manager. 17 NetkaView Network Manager Accedian NID Module .xls file extension and then import into NNM. Figure 15 Online Help Button 2.NetkaView Network Manager Accedian NID Module . You have to prepare data in Microsoft Excel version 97 – 2003 with .. Manual Figure 16 Data Import Tool To open Data Import Tool.xls file extension. . 3. Then save as Microsoft Exel version 97 – 2003 with . 5. Data will be imported and saved in NetkaView Network Manager. Figure 19 Data which will be imported 4. Field name must be in first row of Excel file. Click Browse button and select the file. at main menu Figure 17 Data Import Tool Button To import data into NetkaView Network Manager.NetkaView Network Manager Accedian NID Module .. please follow procedure below: 1. 18 NetkaView Network Manager Accedian NID Module . Change sheet name matching with Excel file and click Load button.Ltd.Manual | Netka System Co. go to page that you want to import data and click bar. Figure 18 Sample data in Microsoft Excel which will be imported 2. Prepare data in Microsoft Excel which you have to fulfil all fields which appear in Data Import Tool. Review data which will be imported and click Import button if correct. Figure 21 Column Header Grid The scrolling page in the Grid can be controlled from the grid scrolling panel as the figure shown below. Re-enter your new password in the confirmation box. Figure 22 Grid Scrolling Panel Item Description 19 NetkaView Network Manager Accedian NID Module . Click Change Password. Click Admin from the main menu. 2. Click Figure 20 Password Change Page 2.. . 3.Manual | Netka System Co. To change your password. 4. The first click will sort ascending. Enter your old password.NetkaView Network Manager Accedian NID Module .Manual 2. Enter your new password. please follow this procedure: 1.11 Password Change For a security reason. just click Logout from the main menu.13 Grid Feature A Grid (Table) appearing on the web-page can sort data by clicking at the column header. 6.Ltd.12 System Log-out To log-out from the system. 5. button. The second click will sort descending. 2. you should immediately change your password after the first log-in. the page will display a report with Crystal Report Utility Panel as the figure shown below. Go to previous page.NetkaView Network Manager Accedian NID Module . . Figure 23 Report Page 20 NetkaView Network Manager Accedian NID Module . Go to any page. Go to last page. When you click at the export report.14 Report Exporting NetkaView Network Manager uses Crystal Report as a report engine.Manual | Netka System Co..Ltd. Table 3 Report Utility Panel Description 2. Go to next page.Manual Go to first page. 15 Diagram Zooming Panel A diagram zooming panel is able to zoom in. Click this button if you want to export report as pdf.Manual | Netka System Co. you can select the format you need at the bottom of the report page and then click at the Export box . csv. and provide 100% view or a fit page. Figure 25 Export Tool 2. xml or html.Manual When a report is generated. you will see a report utility panel at the top of the report page as the figure shown below. MS Excel or MS Word.Ltd. Sub Report List Search Zoom Table 4 Report Utility Panel Description If you need to export the report in the form of Excel. Page scrolling pane. .. zoom out. Figure 24 Report Utility Panel The Report Utility Panel contains utilities as described below: Item Description Export button. Figure 26 Diagram Zooming Panel Item Description Zoom In 21 NetkaView Network Manager Accedian NID Module . Print button.NetkaView Network Manager Accedian NID Module . and zoom out by the below procedure. Graph Zooming 22 NetkaView Network Manager Accedian NID Module .NetkaView Network Manager Accedian NID Module ..Manual | Netka System Co. Click at left bottom corner of graph. Figure 27 Zoom. .Ltd. You can zoom in.In Graph Figure 28 Zoom-Out Graph To do Zoom In Zoom Out Table 6 Procedure Draw rectangle on graph area that you want to zoom in.Manual Zoom Out 100% View Fit Page Table 5 Diagram Zooming Panel Description 2.16 Graph Zooming The graph you see in NNM can be zoomed in to view the lowest data point. Manual 2. Click at the background graph. 2.17 Graph Type Change The graph types you see in NNM can be changed as area.NetkaView Network Manager Accedian NID Module . Select the graph type you need. 3.. Place mouse at the Chart Type.Ltd. Figure 29 Graph Type Change 23 NetkaView Network Manager Accedian NID Module .Manual | Netka System Co. . line. or bar. Please follow the procedure below to change the graph type: 1. pie. 6.exe. Click Install.1 For Web & Polling Server If Web & Polling Server runs on same server. Run NNM 2012. Click Accept to continue install or Don’t accept if decline. Select setup type as Complete. 3. Now NNM ready to install Accedian NID module into server. 1.. Review License Agreement. . 5. 2.NetkaView Network Manager Accedian NID Module .Ltd. please follow this procedure for installation.Manual 3. Installation 3.1 Accedian NID Module. Click Next.Manual | Netka System Co. 4. 7. Input your information for username and your organization. 24 NetkaView Network Manager Accedian NID Module . Insert NNM installation disk into server. Click Next at Welcome screen. Tick to enable RFC-2544 Test if require. Type polling period for RFC2544 Test.1 At Windows Account Panel. . 1. i.3 Click Add Tasks. After NNM completely copied file into server. Input domain name if have. 25 NetkaView Network Manager Accedian NID Module . Click Next at Welcome screen.1 Accedian NID Module. Input Windows username and password. NNM Task Scheduler Adder will be launched.Ltd.Manual 8.NetkaView Network Manager Accedian NID Module .exe. Leave blank if server use Workgroup. 8. ii. 2. 3. Run NNM 2012.Manual | Netka System Co. i.2 At Polling Period Panel. Tick to enable PAA Testif require.2 For Web Server Please follow this procedure for installation. 8. ii.. Type polling period for PAA Test. 3. 8. Insert NNM installation disk into Web Server. .Manual 4. 6. Click Accept to continue install or Don’t accept if decline. 7. Input your information for username and your organization. Click Next 26 NetkaView Network Manager Accedian NID Module .NetkaView Network Manager Accedian NID Module . 5. Review License Agreement. Click Next. Select setup type as Custom..Manual | Netka System Co.Ltd. Disable NNM_AccedianNID_Polling feature. 1 Accedian NID Module. Now NNM ready to install Accedian NID module into server. Close It. Insert NNM installation disk into Polling Server. . 9.Ltd. NNM Task Scheduler Adder will be launched. 27 NetkaView Network Manager Accedian NID Module . 2.3 For Polling Server Please follow this procedure for installation. Click Install. 1..Manual 8.Manual | Netka System Co. Run NNM 2012. Click Next at Welcome screen. After NNM completely copied file into server. 3.NetkaView Network Manager Accedian NID Module .exe. 3. 5. Review License Agreement. Click Next. Select setup type as Custom.Manual 4. Click Next 28 NetkaView Network Manager Accedian NID Module . . Click Accept to continue install or Don’t accept if decline.Manual | Netka System Co.. 7.Ltd. Disable NNM_AccedianNID_Web feature.NetkaView Network Manager Accedian NID Module . Input your information for username and your organization. 6. 3 Click Add Tasks. i.1 At Windows Account Panel. 9. Click Install.Manual | Netka System Co. NNM Task Scheduler Adder will be launched.2 At Polling Period Panel. 9. Type polling period for PAA Test. ii. ii. Input Windows username and password. Tick to enable PAA Testif require.NetkaView Network Manager Accedian NID Module . Type polling period for RFC2544 Test. 9. Leave blank if server use Workgroup. Input domain name if have. Tick to enable RFC-2544 Test if require.. 29 NetkaView Network Manager Accedian NID Module . . After NNM completely copied file into server. i. 9.Manual 8.Ltd. Now NNM ready to install Accedian NID module into server. Click Config from the main menu.Manual | Netka System Co..1 PAA Test Provisioning The Performance Assurance Agent™ (PAA™) is a hardware assisted active measurement function on Accedian NID device that computes layer 2 or 3 (IPv4 UDP) network delay (latency). Figure 30 PAA Test Provisioning Start Page 4. please follow this procedure: 30 NetkaView Network Manager Accedian NID Module . delay variation (jitter). The PAA Test Provisioning also supports scheduled testing. 2. You can provisioning PAA test to the source NID and the target NID at once without having to configure on each NID individually.1.Manual 4.1. packet loss and continuity check. please follow this procedure: 1.Ltd.1 How to open PAA Test Provisioning To open PAA Test Provisioning. .NetkaView Network Manager Accedian NID Module . Provisioning NNM Accedian NID module provides two provisioning tools:   PAA Test Provisioning RFC-2544 Throughput Test Provisioning 4. The PAA Test Provisioning tool including PAA configuration for both Bi-Direction and 1-way (Source-Sink) PAA tests. Click Accedian  PAA  PAA Test Provisioning.2 How to configure PAA Test Provisioning To configure PAA Test Provisioning. 4. Manual | Netka System Co.Ltd. Click Next button. d. Source – The source NIDs’ name.1 How to open PAA Test Provisioning. Operation mode – Specifies one of the following: i. Click Accedian  PAA  PAA Test Provisioning as described in item 4.1. Destination – The destination NIDs’ name. . Minimum value: 61 Layer-2 maximum value: 1500 UDP maximum value: 1472 Enable PAA probe – Select to enable PAA probe 31 NetkaView Network Manager Accedian NID Module . IP. Source-Sink – a source probe generates (Source) PAA samples and the destination probe collects them (Sink) Bi-Dir – both source and destination probe generates and collects PAA samples Sampling Period (msec) – Time between issues of PAA samples g. The size does not include protocol headers (VLAN tag. UDP. e.Manual 1. UDP – Select this option if you want to operates PAA test using UDP. At the first tab following: . c. Packet Size – Size of PAA samples. ii. ii.NetkaView Network Manager Accedian NID Module . Type – Select one of the following: i. enter the PAA Configuration parameters as Figure 31 PAA Test Provisioning – PAA Configuration a. Name – Name of the PAA Test/probe.. 2.    h. b. Layer-2 – Select Layer-2 if you want to test Layer 2 PAA. Ethernet) or the four CRC bytes. f. 3. b.. Click Add to Configuration button. please refer to NNM Administrator’s Guide for instructions how to add network devices to NNM. If you have not already done so.Manual | Netka System Co.Manual 4.Ltd. default is 8793 Source IP Address – The source IP Address automatically updated to the IP address of the source NID Destination UDP Port – Destination UDP port. 6. Source Port – The source port of the source NID Source MAC Address – The source MAC Address automatically updated to the MAC Address of the specified source port Destination Port – The destination port of the destination NID Destination MAC Address – The destination MAC Address automatically updated to the MAC Address of the specified destination port c. b. Repeat step 3 – 6 to add another PAA tests. 32 NetkaView Network Manager Accedian NID Module . You can modify or delete PAA Test configuration list by clicking at each row within the configuration list. d. After finish editing. click at changes. enter the following required parameters: Figure 33 PAA Test Provisioning – PAA Configuration (UDP PAA) a. enter the following required parameters: Figure 32 PAA Test Provisioning – PAA Configuration (Layer-2 PAA) a. 8. If you select Layer-2 PAA Test. or at to update Figure 34 PAA Test Provisioning – Configuration Job list The Accedian NIDs are required to be added to NNM before you can start the Provisioning tool. 5. . Source UDP Port – Source UDP port. default is 8793 Destination IP Address – The destination IP Address automatically updated to the IP address of the destination NID c. If you select UDP PAA Test. 7.NetkaView Network Manager Accedian NID Module . d. Provisioning Tool will show the list of NIDs’ name which is matches the character(s) you typed. 9. If you don’t know the NIDs’ name. 33 NetkaView Network Manager Accedian NID Module . the Provisioning Tool will shows the list of available NID’s name. The Advanced Configuration is optional.Ltd. .NetkaView Network Manager Accedian NID Module . you can click Next button to proceed to the next tab if you do not need to configure advanced configuration options.”. just enter “.Manual | Netka System Co. Click Next button to proceed to the next tab .Manual Textboxes within the Provisioning Tool supports auto-seggestion feature.. the list of available tests will show in drop-down list. Select PAA tetst which you want to configure Advanced Configuration options. Figure 35 PAA Test Provisioning – Otional PAA Advanced Configuration 10. You can type any character(s) which contains in Accedian NIDs’ name already in NNM. If there are PAA tests. 11. Layer-2 PAA packets are encapsulated into the specified VLAN ID First VLAN priority bits. Applies only when VLAN 1 ID is enabled First VLAN ethertype: C-VLAN or S-VLAN Encapsulate Layer-2 PAA packets into a VLAN-in-VLAN.. Applies only when VLAN 2 ID is enabled Description VLAN 2 encapsulation VLAN 2 ID. VLAN 2 represents the outer VLAN. tab do not completely loaded. When enabled. Layer-2 PAA packets are encapsulated into a second VLAN.Ltd. That port should also be set up to perform EVC fault propogation for this parameter to take effect Propogate on port Table 7 Layer-2 PAA Advanced Configuration Parameters Description 34 NetkaView Network Manager Accedian NID Module . VLAN 1 Priority VLAN 1 Type Encapsulate Layer-2 PAA packets into a VLAN First VLAN ID. enter the required parameters for Advanced Configuration options for Layer-2 PAA are as following: Figure 36 Optional PAA Advanced Configuration (Layer-2 PAA) The following table show detail description of the Layer-2 PAA advanced configuration parameters: Parameter VLAN Parameters VLAN 1 encapsulation VLAN 1 ID.NetkaView Network Manager Accedian NID Module . If you select Layer-2 PAA. When enabled. EVC client port to which the MEP status should be propogated.Manual If the PAA tests you added in the you can click Load PAA button to refresh PAA tests list. . Applies only when VLAN 2 ID is enabled Second VLAN ethertype: C-VLAN or S-VLAN. VLAN 2 Priority VLAN 2 Type EVC fault propogation Enable fault propogation Use this PAA probe’s status in fault propogation. The port configuration Fault propogation must be enabled and set to One-way EVC mode to propogate the fault to the opposite port. Applies only when VLAN 1 ID is enabled Second VLAN ID.Manual | Netka System Co. Applies only when VLAN 1 ID is enabled Second VLAN priority bits. This period needs to be a multiple of the One-way reference period.Ltd. This can be used to associate a priority value for the second VLAN. enter the required parameters for Advanced Configuration options for UDP PAA are as following: Figure 37 Otional PAA Advanced Configuration (UDP PAA) The following table show detail description of the UDP PAA advanced configuration parameters: Parameter UDP Parameters DiffServ codepoint (DSCP) Explicit congestion notification (ECN) DSCP class selector. Range: 0-7 Second VLAN priority bits. . ECN value. This parameter is valid only if the One-way Join Period is not 0. Six (6) bits. This can be used to associate a priority value for the first VLAN.Manual | Netka System Co. simulating ECN in the customer network. This can be used to associate an ECN value to the PAA packets.. Reference period (msec) Possible values (in msec):  0 (default): No IGMP measurement 35 NetkaView Network Manager Accedian NID Module . The ECN bits are the last two bits of the IP ToS field.Manual 12.NetkaView Network Manager Accedian NID Module . If you select UDP PAA. Range: 0-7 Description VLAN 1 Priority VLAN 2 Priority IGMP (These parameters are valid only for a UDP sink probe configured with a multicast destination address) The reference period for IGMP measurements. Range: 0-3 First VLAN priority bits. Manual  Minimum: One-way reference period * 10  Maximum: One-way reference period * 9000 If not 0. Possible values (in msec):  0 (default): No IGMP measurement  Minimum: 100 msec  Maximum: (One-way reference period) – (One-way join period) The maximum consecutive leave delay samples allowed greater than the maximum leave delay before incrementing the Leave delay Nbr threshold exceeded. IGMP join and leave delay measurements are performed for this period during which one-way and packet loss samples are collected. no join and leave measurements  Minimum: 10 * sampling period  Maximum: One-way reference period – (5 * sampling period) The maximum join delay objective.NetkaView Network Manager Accedian NID Module . Possible values (in samples):  Minimum: 1  Maximum: (One-way join period) / (Sampling period) The maximum join average delay. Possible values (in msec):  Minimum: 100 msec  Maximum: (One-way reference period) – (One-way join period) One-way joined period (msec) Maximum join delay (msec) Join delay threshold (sample) Join average delay threshold (msec) Maximum leave delay (msec) Leave delay threshold (sample) Leave delay average threshold (msec) Table 8 UDP PAA Advanced Configuration Parameter Description 36 NetkaView Network Manager Accedian NID Module .Manual | Netka System Co. .Ltd. This value should represent how long to collect measurements before issuing an IGMP leave for each period. Possible values (in msec):  Minimum: 100 msec  Maximum: One-way join period The maximum consecutive join delay samples allowed greater than the maximum join delay before incrementing the Join delay Nbr threshold exceeded. Possible values (in samples):  Minimum: 1  Maximum: (One-way reference period – One-way join period) / (Sampling period) The maximum leave average delay.. Possible values (in msec):  0 (default): Constant. Possible values (in msec):  Minimum: 100 msec  Maximum: One-way join period The maximum leave delay objective. NetkaView Network Manager Accedian NID Module . . omitting the local identifier or specifying 0 means to allocate any free local identifier Remote peer identifier for the probe. When 0 specified. the remote peer identifier is discovered dynamically based on the name in the association phase Peer Index Continuity Packet loss reference period (msec) Packet loss threshold (%) Continuity check threshold One-way Reference period (msec) Reference period (in ms) for the continuity measurements. Enter common advanced configuration options (same for both Layer-2 and UDP PAA Test) as following: Figure 38 Optional PAA Advanced Configuration (Common Parameters) Parameter Local and Peer Index Local Index Description Local identifier for the probe. This value needs to be at least 10 times the value of the Sampling period One-way delay allowed for each sample in the Reference period.Manual | Netka System Co. When you add a PAA instance.Manual 13. It is used in conjunction with the Delay threshold (sample) to trigger the alarm PAA_OW_DELAY_ALERT Number of consecutive samples exceeding the Maximum delay that are allowed before declaring the one-way delay alarm for this Reference 37 NetkaView Network Manager Accedian NID Module .Ltd.. This value needs to be at least 10 times the value of the Sampling period Threshold in (%) at which an Excessive packet loss (EPL) alarm is declared Number of consecutive sampling periods without receipt of peer samples before declaring a Continuity loss alarm Maximum delay (msec) Delay threshold (sample) Reference period (in ms) for the one-way measurements. Exceeding the threshold triggers the alarm PAA_TW_AVG_DELAY_ALERT Maximum two-way delay variation threshold to monitor during a test period. click Generate Config button. 38 NetkaView Network Manager Accedian NID Module . the average is calculated from samples taken during the last 10 ms.Manual period Average delay threshold (msec) Maximum delay variation (msec) Delay variation threshold (sample) Average delay variation threshold (msec) Two-way Reference period (msec) Reference period (in ms) for the two-way measurements. Click Add to Configuration button.. It is used in conjunction with the Delay threshold (sample) to trigger the alarm PAA_TW_DELAY_ALERT Number of consecutive samples exceeding the Maximum delay that are allowed before declaring the two-way delay alarm for this Reference period Average two-way delay is calculated for the samples during the reference period. for a reference period of 10 ms. Exceeding the threshold triggers the alarm PAA_OW_AVG_DV_ALERT Maximum delay (msec) Delay threshold (sample) Average delay threshold (msec) Maximum delay variation (msec) Delay variation threshold (sample) Average delay variation threshold (msec) Table 9 PAA Advanced Configuration Parameter Description 14. Exceeding the threshold triggers the alarm PAA_TW_AVG_DV_ALERT Average one-way delay is calculated for the samples during the reference period. Repeat step 10–14 to add Advanced Configuration options to another PAA tests if required. For example.Manual | Netka System Co. 16. 15. .NetkaView Network Manager Accedian NID Module . It is used in conjunction with the Delay variation threshold (sample) to trigger the alarm PAA_TW_DV_ALERT Number of consecutive samples exceeding the Maximum delay variation that are allowed before declaring the two-way delay variation alarm for this Reference period Average two-way delay variation is calculated for the samples during the reference period.Ltd. At tab . Exceeding the threshold triggers the alarm PAA_OW_AVG_DELAY_ALERT Maximum one-way delay variation threshold to monitor during a test period. The system will generates configuration commands to be sending to source and destination NIDs. It is used in conjunction with the Delay variation threshold (sample) to trigger the alarm PAA_OW_DV_ALERT Number of consecutive samples exceeding the Maximum delay variation that are allowed before declaring the one-way delay variation alarm for this Reference period Average one-way delay variation is calculated for the samples during the reference period. This value needs to be at least 10 times the value of the Sampling period Two-way delay allowed for each sample in the Reference period. NetkaView Network Manager Accedian NID Module . . 18.Manual Figure 39 PAA Test Provisioning – Generate Config 17. Select Schedule Date & Time as following: a.Manual | Netka System Co. Click Next button to continue to tab .Ltd. Figure 40 PAA Test Provisioning – Deploy 19. You can review and modify any command lines in the configlet text box if required. Run Now – deploy PAA Tests immediately 39 NetkaView Network Manager Accedian NID Module .. By Region – Enter same username and password of multiple NIDs within each Region if its have common credentials d. Created Date. Click Deploy button to start PAA Tests configuration deployment. (Option) Type any word to search into the search box. .Ltd. 3. By Node – Enter username and password of each NIDs individually b. 4. Results and Description. User. Click Config from the main menu. Schedule Date – Select date and time to deploy configuration End date – Select this option if you want to specify schedule to end PAA tests. By POP – Enter same username and password of multiple NIDs within each POP if its have common credentials c. Click Accedian  PAA  PAA Provisioning Report. By Zone – Enter same username and password of multiple NIDs within each Zone if its have common credentials 21. End Date. Click Query button. select Input Credential as following: a. 20. Select User.. Node. Configuration.Manual b.Manual | Netka System Co. 2.3 How to View the PAA Test Provisioning Report The PAA Test Provisioning Report contains Test ID. 4. Sub-ID.1. Deploy Start Date. PAA name. Authentication Authorization section.NetkaView Network Manager Accedian NID Module . To view the PAA Tests Provisioning reports please follow this procedure: 1. 40 NetkaView Network Manager Accedian NID Module . 5. Deployed Date. icon for each row. click the Configuration window will be displayed..Manual Figure 41 PAA Test Provisioning Report 6.Manual | Netka System Co. To view the detail configuration. The Show Figure 42 PAA Test Provisioning – View Detail Configuration 41 NetkaView Network Manager Accedian NID Module .NetkaView Network Manager Accedian NID Module . .Ltd. Figure 43 RFC-2544 Test Generator You can use the traffic generator to generate one or two flows of testing traffic.1731 implementations allow the CIR / EIR of an EVC to be verified without disrupting customer traffic. Each flow describes the characteristics of the test traffic. .2.1 How to open RFC-2544 Test Provisioning To open RFC-2544 Test Provisioning. such as traffic type and bit rate. Each flow can be set up for:  Layer-2.Ltd. Click Accedian  RFC-2544  RFC-2544 Throughput Test Provisioning. Click Config from the main menu. You can set up the traffic generator to send one or two traffic flows. Layer-3 traffic  VLAN or VLAN-in-VLAN encapsulation of test traffic  Different traffic types and payload patterns The RFC-2544 Test Provisioning tool including RFC-2544 Throughput Test configuration for both Out-of-Service and In-service tests.NetkaView Network Manager Accedian NID Module . VLAN and patterns configuration options. each with a different traffic type.. 42 NetkaView Network Manager Accedian NID Module . 2.Manual 4.Manual | Netka System Co. please follow this procedure: 1.2 RFC-2544 Throughput Test Provisioning RFC-2544 is an advanced traffic generator and analysis test that allow you to perform fully automated and documented turn-up tests. 4. The RFC-2544 Throughput Test Provisioning tool also supports scheduled testing. Traffic generator can be configured to an out-ofservice or in-service where the in-service means the NIDs’ hardware-based Y. The generator also gives results for each flow. You can provisioning RFC-2544 Throughput Test to the generator NID and the monitor NID at once without having to configure on each NID individually. . Click Next button.Manual | Netka System Co.2.Manual Figure 44 RFC-2544 Throughput Test Provisioning – Start Page 4. Click Accedian  RFC-2544  RFC-2544 Throughput Test Provisioning as described in item 4.NetkaView Network Manager Accedian NID Module .Ltd.2.2 How to configure RFC-2544 Test Provisioning To configure RFC-2544 Test Provisioning. 2. please follow this procedure: 1.1 How to open RFC-2544 Test Provisioning. . Figure 45 PAA Test Provisioning – PAA Configuration 43 NetkaView Network Manager Accedian NID Module . d.1731 LBM frames with Accedian ethertype. Refer to ITUT Y. enter the following: a. 4. Automatically updated to the MAC Address of the specified Generator port The destination MAC Address to be send traffic flow(s) to. For Layer-2 traffic only. . Terminal – The RFC-2544 test is terminated at the monitor unit.1731 (Range: 0–7) MAC Address Monitor Y.Y. c. Monitor mode – Select one of the following: i. Layer-3 – IP/UDP packets to perform a test across the multi-layered network.Manual | Netka System Co. Monitor – The target NID to monitor RFC-2544 test traffic.. Layer-2 – Y.Ltd. enter the following required packet header configuration parameters: Figure 46 Layer-2 Packet Header Configuration Parameter Description Packet Header Parameters (Layer 2) MAC Address Generator The source MAC Address. Monitor Port – The target NIDs’ incoming port on which to receive the flow(s) and monitor statistic. IP multicast – IP multicast packets to test multiple receiving points.1731 opcode frames to be used only with “MAC-Address swap” based loopback devices. Layer-2 Accedian – special Y. ii. Bypass – The RFC-2544 test measurements are performed but the traffic follows the rules configured in the Policies for this specific traffic type. f. The monitor NID will also monitor on this MAC address.1731 LBM frames. b. Type – Select one of the following: i. iii. At the first tab .Manual 3. ii. Layer-2 Accedian . Generator Port – The source NIDs’ outgoing port on which to send the flow(s). iv. Generator – The source NID to generate RFC-2544 test traffic. v. Automatically updated to the MAC Address of the specified Monitor port Maintenance Entity Group level. If you select Layer-2 Accedian and Layer-2 Generic Test.1731 MEG level 44 NetkaView Network Manager Accedian NID Module .NetkaView Network Manager Accedian NID Module . e. Manual | Netka System Co. If you select Layer-3 or IP Multicast Test. For IP multicast traffic only Source UDP port number used to generate the UDP packet IP address of the remote unit Destination UDP port number used to generate the UDP packet DiffServ Code Point to set in the generated packets (0 – 63) Explicit Congestion Notification value (0 – 3) The IPv4 time to live value (0 – 255) Table 11 Traffic Generator Layer-3 Header Parameters Description 6. enter the following VLAN header configuration parameters if required: Figure 48 VLAN Header Configuration Parameter Description 45 NetkaView Network Manager Accedian NID Module .NetkaView Network Manager Accedian NID Module .Ltd.Manual Table 10 Traffic Generator Layer-2 Packet Header Parameters Description 5.. enter the following required packet header configuration parameters: Figure 47 Layer-3 Packet Header Configuration Parameter Description Packet Header Parameters (Layer 3 & Multicast) IP Address Generator Generator UDP Port IP Address Monitor Monitor UDP Port DSCP ECN TTL The source IP address used for the IP header. . (Optional) For all test types. Flow Type Regulator 46 NetkaView Network Manager Accedian NID Module . When enabled. Applies only when VLAN 2 header is enabled.. . VLAN1 must be enabled to use 2 VLAN headers Second VLAN ID. Enter the following flow configuration parameters: Figure 49 Flow Configuration Parameter Description First flow profile settings and Second flow profile settings Flow Select first or second flow configuration Type of flow testing being done is:  Out-of-service: two-way loopback using the full link bandwidth or  In-service: to generate traffic without affecting customer traffic The regulator is used for In-Service test only. The choices are: S-VLAN and C-VLAN First VLAN canonical format indicator (CFI) Encapsulates all packets with 2 VLAN headers (Q in Q).NetkaView Network Manager Accedian NID Module . Select an existing regulator from the list or create new. The choices are: S-VLAN and C-VLAN Second VLAN canonical format indicator (CFI) Table 12 Traffic Generator VLAN Header Parameters Description 7. this field has no effect. when Out-of-service flow type is selected.Manual | Netka System Co. all test packets are encapsulated into the specified VLAN ID First VLAN priority bits First VLAN Ethernet type.Manual Packet Header Parameters (All Test Types) VLAN 1 header VLAN 1 ID VLAN 1 Priority VLAN 1 Type VLAN 1 CFI VLAN 2 header VLAN 2 ID VLAN 2 Priority VLAN 2 Type VLAN 2 CFI Enable to encapsulates all packets with 1 VLAN header First VLAN ID. all test packets are encapsulated into the second specified VLAN ID Second VLAN priority bits Second VLAN Ethernet type. Applies only when VLAN 1 header is enabled. When enabled.Ltd. NetkaView Network Manager Accedian NID Module - Manual Flow Name Flow Description Name assigned to the flow. For reference in the Results section. A description to identify the flow and its characteristics. For reference in the Results section. Type of traffic may be one of the following: Constant: To send packets at a specific bit rate (Kbps). You need to specify the Bit rate. Burst: To send a predefined number of packets at every period. You need to specify the Packets per burst. For Constant traffic type, specify the bit rate (in Kbps). Traffic Type Supported values are:  0 to < 12.5 Mbps (steps of 0.125 Mbps)  > 13 Mbps to 1 Gbps (steps of 1 Mbps) For Burst traffic type, specify the number of packets to send per period (Packets per burst) and the period (in ms) between each burst of packets (Inter-burst gap). You must select a bit rate that does not exceed the capacity of the outgoing port used for that test. Failure to do so will result in inaccurate results Packet sizes may be fixed or random. For fixed packet size, specify the packet size. Packet size For random packet size only, specify the Minimum and the Maximum packet sizes. The size of test packets varies randomly between the minimum and maximum values. Note that you may need to modify your port MTU sizes to accommodate your selection. May be a fixed-data, incremental or random pattern in the payload part of the transmitted frames. For a fixed payload pattern, specify the 32 bit value, e.g. 0x12345678 For a random payload pattern, select one of the pre-configured patterns. Payload pattern For an incremental payload pattern, select the increment factor of bytes for byte-by-byte increments or words (2 bytes) for word-by-word increments Duration type may be one of the following: Duration type Continuous: Stops only when the user manually stops the test. 47 NetkaView Network Manager Accedian NID Module - Manual | Netka System Co.,Ltd. NetkaView Network Manager Accedian NID Module - Manual Seconds: Stops after a specified number of seconds (Duration (secs)). Bytes: Stops after sending a specified number of bytes (Duration (bytes)). Packets: Stops after sending a specified number of packets (Duration (packets)) Table 13 Traffic Generator Flow Parameters Description 8. (Optional) If you select an In-Service flow type, either select a regulator from the list or create a new regulator by entering the following parameters: Figure 50 Create New Regulator Configuration Parameter Description Regulator Configuration Parameters Traffic Regulator Name Name identifying the regulator The average rate (in Kbps) up to which the network delivers frames and meets the performance objectives defined by the CoS Service Attribute. Traffic that is declared green and that conforms to CIR or CBS is allowed to pass through the Policer without rate limitation. Green traffic in excess of this maximum is declared yellow by the regulator and is submitted to EIR regulation. Range: 0 to maximum port speed (steps of 125 Kbps) The maximum number of kilobytes available for a burst of frames that are sent at the UNI speed and that remain CIR-conformant. The burst size must be greater than the port Maximum Transfer Unit (MTU). Range: 2 to 2015 KB The maximum average rate in Kbps of frames up to which the network may deliver Service Frames but without any performance objectives. Yellow traffic in excess of this maximum is declared red by the regulator Committed Information Rate (Kbps) Committed Burst Size (KB) Excess Information Rate (Kbps) 48 NetkaView Network Manager Accedian NID Module - Manual | Netka System Co.,Ltd. NetkaView Network Manager Accedian NID Module - Manual and is dropped. Range: 0 to maximum port speed (steps of 125 Kbps) The maximum number of kilobytes available for a burst of frames that are sent at the UNI speed and that remain EIR-conformant. The burst size must be greater than the port MTU Range: 2 to 2015 KB Indicates whether the color-aware or color-blind property is employed by the Bandwidth Profile.  color-aware: Pre-determined level of Bandwidth Profile compliance for each Frame is taken into account when determining the level of compliance  color-blind: All incoming traffic enters the traffic regulator initially green The way in which the regulator processes yellow traffic.  False: Yellow data is limited by the setting of the Excess Information Rate  True: Yellow data is limited by the setting of the Committed Information Rate plus the Excess Information Rate Excess Burst Size (KB) Color mode Coupling flag Table 14 Regulator Configuration Description 9. Click Add to Configuration button. 10. Repeat step 3 – 9 to add another tests. You can add up to two flows per device (Flow 1 and Flow 2). 11. You can modify or delete RFC-2544 Test configuration list by clicking at at each row within the configuration list. After finish editing, click at to update changes. or Figure 51 RFC-2544 Test Provisioning – Configuration Job list 12. Click Next button to proceed to the next tab , click Generate Config button. The system will generates configuration commands to be sending to the generator and monitor NIDs. 49 NetkaView Network Manager Accedian NID Module - Manual | Netka System Co.,Ltd. NetkaView Network Manager Accedian NID Module - Manual Figure 52 RFC-2544 Test Provisioning – Generate Config 13. You can review and modify any command lines in the configlet text box if required. 14. Click Next button to continue to tab . Figure 53 RFC-2544 Test Provisioning – Deploy 15. Select Schedule Date & Time as following: a. Run Now – deploy RFC-2544 Tests immediately b. Schedule Date – Select date and time to deploy configuration 50 NetkaView Network Manager Accedian NID Module - Manual | Netka System Co.,Ltd. 3 How to View the RFC-2544 Test Provisioning Report The RFC-2544 Test Provisioning Report contains Test ID. 4. By Zone – Enter same username and password of multiple NIDs within each Zone if its have common credentials 17.2.NetkaView Network Manager Accedian NID Module . Click Deploy button to start RFC-2544 Tests configuration deployment. By Node – Enter username and password of each NIDs individually b. Results and Description.Manual 16. 5. 4. 51 NetkaView Network Manager Accedian NID Module . 3. End Date. By (Username). Authentication Authorization section. Configuration. Select User.Manual | Netka System Co. (Option) Type any word to search into the search box. Click Accedian  RFC-2544  RFC-2544 Provisioning Report. Sub-ID. To view the RFC-2544 Tests Provisioning reports please follow this procedure: 1. 2.. Deployed Date. By Region – Enter same username and password of multiple NIDs within each Region if its have common credentials d. RFC-2544 Info. Deploy Start Date. Click Query button. Click Config from the main menu. By POP – Enter same username and password of multiple NIDs within each POP if its have common credentials c. Created Date. select Input Credential as following: a.Ltd. . Node. icon for each row.Ltd.NetkaView Network Manager Accedian NID Module .Manual | Netka System Co.Manual Figure 54 RFC-2544 Test Provisioning Report 6. The Show Figure 55 RFC-2544 Test Provisioning – View Detail Configuration 52 NetkaView Network Manager Accedian NID Module . click the Configuration window will be displayed. . To view the detail configuration.. Place a pointer mouse over Monitoring  Accedian View at the main menu. jitterSD chart. Region. Click PAA Status View.1 How to use PAA Status View To open PAA Status View. You can filter to show PAA test by zone. at Detail column. please follow this procedure. 1. reachability chart.Manual 5.NetkaView Network Manager Accedian NID Module . You can drill down to see PAA test state and status history. just click To view PAA test statistic report for last 3 days.Ltd.1 PAA Status View PAA Status View will display latest PAA test state and status for all PAA tests in your network. latencyDS chart. packetlossDS chart. at Statistic column.. Also. jitterDS chart from PAA Status View. 3. 2. 4. region. PoP.). Monitoring 5. packetlossSD chart. latencySD chart. Network and Source NID that want to view. PAA Status View page will automatically refresh at the predefined period (default is 5 min. [Option] Select Zone. To view PAA test state and status history.Manual | Netka System Co. .1. Click Show button. just clicek State Disabled Associating Associated Running Idle Locked IS Locked OOS Description Disabled by configuration Enabled looking for peer Enabled peer found Running one time measurement Idle after one time measurment completed Locked traffic in service Locked OOS 53 NetkaView Network Manager Accedian NID Module . Figure 56 PAA Status View 5. pop or NID. you can view PAA test statistic report including round trip time chart. reachability. destination.Manual | Netka System Co.). reachability.NetkaView Network Manager Accedian NID Module . Click PAA Statistic View. PAA Statistic View page will automatically refresh at the predefined period (default is 5 min.1 How to Open PAA Statistic View To open PAA Statistic View.2. operation id. packet loss.) The first page in PAA Statistic View show summary results for all operations in the selected profile. If your profile has more than 6 graphs.Ltd. 54 NetkaView Network Manager Accedian NID Module . etc. 5. You will see PAA Statistic View – Load Profile. Place a pointer mouse over Monitoring  Accedian View at the main menu. please follow this procedure. 1. 2. source.Manual Table 15 PAA Test State Description Status Code CC EPL OD OAD ODV OAV TD TAD TDV TAV Description Continuity Check Excessive Packet Loss One-way Delay One-way Average Dela One-way Delay Variation One-way Average Delay Variation Two-way Delay Two-way Average Delay Two-way Delay Variation Two-way Average Delay Variation Table 16 PAA Test Status Description 5.).2 PAA Statistic View PAA Statistic View will display the multipage real time monitoring for different PAA test performance metrics including response time (RTT). The following pages can show detailed graph of each operation. PAA Statistic View will automatically rotate to each tab according to your set-up of predefined interval value (default is 20 second. view (response time.. jitter of selected PAA test operations with your selectable criterias (e. Each PAA Statistic View tab can show up to 6 graphs. latency.g. . then PAA Statistic View will automatically create the new tab. 4. [Option] Change threshold value for each PAA test operation type. Select the profile which you want to monitor a graph. Figure 58 PAA Statistic View – Modifying threshold value 7. You will see PAA Statistic View. Figure 59 PAA Statistic View – Summary Page 55 NetkaView Network Manager Accedian NID Module . The threshold line will show on each corresponding graph type when IP SLA profile is loaded. If you have never created your PAA Statistic View profile.Ltd. [Option] Change tab rotate interval if desired. Please see item 5.Manual Figure 57 PAA Statistic View – Load Profile Page 3.Manual | Netka System Co. 5.NetkaView Network Manager Accedian NID Module . .3 How to Create PAA Statistic View Profile..2. Click Load Profile button. please create profile first. 6. 3.NetkaView Network Manager Accedian NID Module .2. 2.Ltd. Place mouse pointer over Monitoring  Accedian View at the main menu. Select the tab which you want to export.2.3 How to Create PAA Statistic View Profile To create PAA Statistic View profile. please follow this procedure. 1. 4.. please follow procedure explained in item Error! Reference source not found. . 2.2 How to Export PAA Statistic View To export the PAA Statistic View that you select. Click New Profile button. 5. Click Export button. Figure 61 PAA Statistic View – Create Profile 56 NetkaView Network Manager Accedian NID Module . Error! Reference source not found.Manual | Netka System Co. 3. 1. To export the report as a file.. Click PAA Statistic View. please follow this procedure. Report will be displayed.Manual Figure 60 PAA Statistic View – Graph Page 5. Repeat steps 6-8 to add the other PAA test operations. Enter the profile name. 4. 2. . 6. change interval if you need. 8. [Option] Tick the shared checkbox if you want to share this profile to other users. Latency DS. Click PAA Statistic View. Select the profile which you want to edit.5 How to Delete PAA Statistic View Profile To delete PAA Statistic View profile. 5.2. 4. Select the Profile you want to delete. Reachabilily. Jitter DS. Figure 62 PAA Statistic View – Edit Profile 5. 7.2. 2.4 How to Edit PAA Statistic View Profile To edit PAA Statistic View profile. please follow this procedure. Packet Loss SD. Click Add to Table button.Manual 4. 5.2. 9.Manual | Netka System Co. Click Update Profile button.NetkaView Network Manager Accedian NID Module . Destination. Click Edit Profile button. Click Edit Profile. 57 NetkaView Network Manager Accedian NID Module . 1. Add a new graph as the procedure in Section 5. 8. Latency SD. 6. Select Source. Click PAA Statistic View. Click Save Profile button. please follow this procedure. Click Delete link from the table to delete graph. View (Response Time. Place mouse pointer over Monitoring  Accedian View at the main menu. change interval.. Place mouse pointer over Monitoring  Accedian View at the main menu.3. 3. 5. Change the profile name. 3.Ltd. Jitter SD. 1. 9. 7. [Option] Tick shared checkbox if you want to share this profile to other users. Packet Loss DS). Operation ID. Ltd. . Click Delete Profile button.Manual 5.NetkaView Network Manager Accedian NID Module .Manual | Netka System Co. 58 NetkaView Network Manager Accedian NID Module .. 59 NetkaView Network Manager Accedian NID Module . The following list shows all Accedian reports under Accedian Report menu. When you place a mouse over Report at the main menu. 2. This menu contains reports from VPN view.1 Overview NetkaView Network Manager (NNM) contains a lot of reports. . PAA Statistic Everyday Report PAA Statistic Matrix Report PAA Statistic Summary Report PAA Reachability Report PAA Response Time Report PAA Packet Loss Report PAA Latency Report PAA Jitter Report PAA Status Summary Report PAA Status Report RFC-2544 Throughput Test Report You may not see some reports if you have no privilege. 7. 3. interface for report filtering. The reports contain grids or graphs.Manual 6. 9. 1. Customer report requires Customer Module. interface + description for report filtering. This menu contains reports from customer view. Figure 63 Main Report Menu Sub Report Menu Overall Report Description This menu contains reports from network view. site for report filtering. 11. Report input will use node. They can be exported to pdf. Please ask your system administrator if you need to view missing reports. Customer Report Customer VRF Report Table 17 Main Report Menu 6. 10. 4.. three sub-report menus will be expanded. Report 6. 6.Manual | Netka System Co. Report input will use VRF. 5. Customer VRF Report requires MPLS Module. MS Excel or MS Word.NetkaView Network Manager Accedian NID Module . Report input will use customer name.2 Accedian Report The Accedian Report menu is under the Overall Report menu.Ltd. 8. the report will generate summary graphs of every day within that month. packet loss. 7. 8.Manual | Netka System Co.1.2. Select Month.Ltd. Select View (Minimum/Average/Maximum). PAA Operation. 2. latency or jitter) of a selected PAA Test operation. You can modify the threshold value in the threshold box if required. Figure 64 PAA Statistic Everyday Report 6. 4. 5.NetkaView Network Manager Accedian NID Module .Manual 6. If the selected Source and Destination have multiple PAA operations. The default threshold values are show in below figure: 9.1 1.2. reachability. 3. You can select month that you want to see a report. you can select an operation from the drop-down list. You can also specify threshold and baseline for PAA value to display in the report if required. Select any PAA value from the list:  Response time  Reachability  Packet loss  Latency  Jitter. How to See PAA Statistic Everyday Report Place a pointer mouse at Report and click Overall Report. Click Show Report button. Place a pointer mouse at Accedian Report.. 60 NetkaView Network Manager Accedian NID Module . 6. . (Option) Select Threshold or Baseline options to draw in the graph. Destination NID.1 PAA Statistic Everyday Report PAA Statistic Everyday (Summary by Day) Report contains summary graph of PAA results (response time. Select Source. Click PAA Everyday. and jitter result available for the PAA operation.2 How to Export PAA Statistic Everyday Report To export the PAA Statistic Everyday report that you select.2. latency. if value lower than threshold value it will show in green background but if it higher than the threshold value the background will be red except reachability is opposite.1. 3. latency and jitter also show both Source-to-Destination (SD) and Destination-to-Source (DS). the report will generate summary matrix from start date to end date. You can select start date and end date that you want to view a report. The report will be displayed. Packet loss.2.2.NetkaView Network Manager Accedian NID Module . To export a report as a file.Manual Figure 65 Sample PAA Statistic Everyday Report 6. 61 NetkaView Network Manager Accedian NID Module . reachability.. 2. packet loss.1 PAA Statistic Everyday Report. please follow the procedure explained in item 2. 6. The result will compare with its threshold value.2 PAA Statistic Matrix Report PAA Statistic Matrix Report shows the RTT (round-trip time).14 Report Exporting. You can also specify threshold for PAA value to display in the report if required. Follow the procedure explain in item 6.Ltd. . please follow this procedure: 1.Manual | Netka System Co. 1 1. The default threshold values are show in below figure: 6. Place a pointer mouse at Accedian Report. Click Query button. Click PAA Matrix.Manual Figure 66 PAA Matrix Report 6. 2.NetkaView Network Manager Accedian NID Module . (Option) Select Threshold to draw in the graph. How to See PAA Statistic Matrix Report Place a pointer mouse at Report and click Overall Report. 3.2. You can modify the threshold value in the threshold box if required. .2. Select Start and End date. 4.. 5.Ltd.Manual | Netka System Co. 62 NetkaView Network Manager Accedian NID Module . 2. please follow this procedure: 1. The report will be displayed. 3. PAA Statistic Summary Report shows result in both graph and grid.2. type.Manual | Netka System Co. Reachability. destination.2. . operation number. 2. 63 NetkaView Network Manager Accedian NID Module . Jitter Destination-Source. You can select source.2. Follow the procedure explain in item 6.NetkaView Network Manager Accedian NID Module . 6..3 PAA Statistic Summary Report PAA Statistic Summary Report show graph that include Response Time.Manual Figure 67 Sample PAA Statistic Matrix Report 6.2 How to export PAA Statistic Matrix Report To export the PAA Statistic Matrix report that you select. Latency Destination-Source within the same page. please follow the procedure explained in item 2. start date and end date to see report.Ltd. Latency Source-Destination.2 PAA Statistic Matrix Report. Packet Loss.14 Report Exporting. Jitter Source-Destination. To export a report as a file. ..NetkaView Network Manager Accedian NID Module .Manual | Netka System Co.Ltd.Manual Figure 68 PAA Statistic Summary Report 64 NetkaView Network Manager Accedian NID Module . NetkaView Network Manager Accedian NID Module .. .Ltd.Manual | Netka System Co.) 65 NetkaView Network Manager Accedian NID Module .Manual Figure 69 PAA Statistic Summary Report (cont. Select PAA Operation name. Select Destination.Manual | Netka System Co. . 2. Place a pointer mouse at Accedian Report.3.Manual 6. Select Source. 9.2. Click Graph It button.Ltd. 3. 8. 6.1 1. Select Start and End Date.. Click PAA Summary. Figure 70 Sample PAA Statistic Summary Report 66 NetkaView Network Manager Accedian NID Module . How to see PAA Statistic Summary Report Place a pointer mouse at Report and click Overall Report.NetkaView Network Manager Accedian NID Module . 4. 5. Select Type. 7. 4 PAA Reachability Report PAA Reachability Report shows PAA operation up time in percent (%).2. 2. PAA Reachability Report shows result in both grid and graph.Ltd. .3 PAA Statistic Summary Report. 6. To export a report as a file.. Figure 71 PAA Reachability Report 67 NetkaView Network Manager Accedian NID Module .Manual 6.2. The report will be displayed.NetkaView Network Manager Accedian NID Module .Manual | Netka System Co.2.2 How to export PAA Statistic Summary Report To export the PAA Statistic Summary report that you select. Follow the procedure explain in item 6. 3. The operation up time can be considered as reachability since PAA is the continuous process that sends statistics of operation (success or failure) in a matter of minute. please follow this procedure: 1. please follow the procedure explained in item 2.3.14 Report Exporting. Select PAA Operation name. Place a pointer mouse at Accedian Report. 8. 9.Manual | Netka System Co. 4.NetkaView Network Manager Accedian NID Module .. Click Graph It button.Ltd. Select Start and End Date. Figure 72 Sample PAA Reachability Report 68 NetkaView Network Manager Accedian NID Module . 7. 6.2. 2. Select Source. Click PAA Reachability (%). Select Type.1 1.Manual 6. . 5. Select Destination. 3.4. How to see PAA Reachability Report Place a pointer mouse at Report and click Overall Report. NetkaView Network Manager Accedian NID Module .5 PAA Response Time Report PAA Response Time Report is the essential of PAA operation.4 PAA Reachability Report. PAA Response Time Report shows result in both graph and grid.. please follow this procedure: 1.14 Report Exporting.Manual 6. Figure 73 PAA Response Time Report 69 NetkaView Network Manager Accedian NID Module . Follow the procedure explain in item 6.Ltd. 3. The report will be displayed.2. To export a report as a file. .Manual | Netka System Co. 2.4.2. please follow the procedure explained in item 2. 6.2. The reponse time is measured in microsecond.2 How to export PAA Reachability Report To export the PAA Reachability Report that you select. PAA operation provides the response time that measure the round trip time that packet will come back to the source probe. 9. 2. Click PAA Response Time.. Select Type. How to see PAA Response Time Report Place a pointer mouse at Report and click Overall Report. 8. 3. Place a pointer mouse at Accedian Report.Manual | Netka System Co. 5. 4.1 1. Select Source. Select Destination. 7. 6. Click Graph It button.5.Manual 6. Select PAA Operation name.2. Select Start and End Date. Figure 74 Sample PAA Response Time Report 70 NetkaView Network Manager Accedian NID Module .NetkaView Network Manager Accedian NID Module . .Ltd. 2 How to export PAA Response Time Report To export the PAA Response Time report that you select. 3.Ltd.2. ..2. It provides both Source-to-Destination (SD) and Destination-to-Source (DS) Packet Loss. Figure 75 PAA Packet Loss Report 71 NetkaView Network Manager Accedian NID Module .Manual | Netka System Co. please follow this procedure: 1. 6.NetkaView Network Manager Accedian NID Module .5. Follow the procedure explain in item 6.14 Report Exporting.Manual 6. please follow the procedure explained in item 2. To export a report as a file.6 PAA Packet Loss Report PAA Packet Loss Report shows the number of lost packets that occur during operation.2. 2. The report will be displayed.5 PAA Response Time Report. PAA Packet Loss Report shows result in both graph and grid. Figure 76 Sample PAA Packet Loss Report 72 NetkaView Network Manager Accedian NID Module .Manual 6.NetkaView Network Manager Accedian NID Module . Place a pointer mouse at Accedian Report.. 4. Select PAA Operation name. Click PAA Packet Loss. 8.2. Select Destination. How to see PAA Packet Loss Report Place a pointer mouse at Report and click Overall Report. Click Graph It button. 7.6. Select Source. 9.Manual | Netka System Co. Select Type. 5. Select Start and End Date (date with green label means that there’s provisioning data in range). . 6.Ltd. 2. 3.1 1. 2.14 Report Exporting.2. To export a report as a file. please follow the procedure explained in item 2.6 PAA Packet Loss Report. please follow this procedure: 1.Manual 6. 2.2.Manual | Netka System Co.7 PAA Latency Report PAA Latency Report shows packet delay variation between source and destination that occur during the test. . 3. Follow the procedure explain in item 6. PAA Latency Report shows result in both graph and grid. The report will be displayed.2 How to export PAA Packet Loss Report To export the PAA Packet Loss Report that you select. It provides both Source-to-Destination (SD) and Destination-to-Source (DS) Latency.NetkaView Network Manager Accedian NID Module . Figure 77 PAA Latency Report 73 NetkaView Network Manager Accedian NID Module .6.Ltd.. 6. 74 NetkaView Network Manager Accedian NID Module .14 Report Exporting. The report will be displayed.Ltd.2. 7. Follow the procedure explain in item 6.7. Figure 78 Sample PAA Latency Report 6. To export a report as a file. 3.Manual 6.7 PAA Latency Report.. Select Destination.7.2.2. please follow the procedure explained in item 2. Select PAA Operation name. Select Start and End Date (date with green label means that there’s provisioning data in range) Click Graph It button. Click PAA Latency. 2. Select Type. Place a pointer mouse at Accedian Report.2 How to export PAA Latency Report To export the PAA Latency Report that you select. Select Source. please follow this procedure: 1.1 1. 3.Manual | Netka System Co. . 2. 9. 6.NetkaView Network Manager Accedian NID Module . 5. 4. How to see PAA Latency Report Place a pointer mouse at Report and click Overall Report. 8. a positive jitter value indicates that the packets arrived greater than 10 ms apart. If the packets arrive 12 ms apart.Manual 6. But if there are delays in the network (like queuing. the destination should be receiving them 10 ms apart. When multiple packets are sent consecutively from source to destination.2. positive jitter values are undesirable. for example. arriving through alternate routes. and a jitter value of 0 is ideal. For delay-sensitive networks like VoIP..8 PAA Jitter Report Jitter means inter-packet delay variance. . PAA Jitter Report shows result in both graph and grid. and if the network is behaving ideally.Manual | Netka System Co.Ltd. 10 ms apart. and so on) the arrival delay between packets might be greater than or less than 10 ms. then negative jitter is 2 ms. It provides both Source-to-Destination (SD) and Destination-to-Source (DS) Jitter.NetkaView Network Manager Accedian NID Module . then positive jitter is 2 ms. Using this example. PAA Jitter Report shows inter-packet delay variance between source and destination that occur during the test. if the packets arrive 8 ms apart. Figure 79 PAA Jitter Report 75 NetkaView Network Manager Accedian NID Module . Select Start and End Date.NetkaView Network Manager Accedian NID Module .8.2.2. Select Source. 4.1 1.2. 8. Follow the procedure explain in item 6. Place a pointer mouse at Accedian Report. Select Type.8. 3. Click Graph It button.Ltd.Manual 6. please follow this procedure: 1. Select PAA Operation name.2 How to export PAA Jitter Report To export the PAA Jitter Report that you select.Manual | Netka System Co. Select Destination. Click PAA Jitter.8 76 NetkaView Network Manager Accedian NID Module . 2. 7. Figure 80 Sample PAA Jitter Report 6. 5. 9. 6. . How to see PAA Jitter Report Place a pointer mouse at Report and click Overall Report.. 14 Report Exporting. 3. Last Week) Start date and end date Month PAA Status Summary Report will show you source probe. The report will be displayed. 4. State Disabled Associating Associated Running Idle Locked IS Locked OOS Description Disabled by configuration Enabled looking for peer Enabled peer found Running one time measurement Idle after one time measurment completed Locked traffic in service Locked OOS Table 18 PAA Test State Description Status Code CC EPL OD OAD ODV Description Continuity Check Excessive Packet Loss One-way Delay One-way Average Dela One-way Delay Variation 77 NetkaView Network Manager Accedian NID Module . please follow the procedure explained in item 2.    Period (Latest.2. TD. TAD.9 PAA Status Summary Report PAA Status Summary Report shows the state and status of PAA probes. TAV of selected time condition. OD. latest status including CC. OAV. latest state of selected time condition. PAA Jitter Report.. you can drill down to see PAA state and status detail in 5 minute detail. destination.Manual | Netka System Co. From PAA Status Sumary Report. OAD. PAA probe name (Operation). EPL. ODV. Last Hour.NetkaView Network Manager Accedian NID Module . You can select to view state and status according to time condition below. The following tables show possible value and description for PAA probe state and status. . Last 24 Hour.Ltd.Manual 2. TDV. To export a report as a file. 6. Last Week) ii. Click PAA Status Summary.1 1. 4.NetkaView Network Manager Accedian NID Module . Select time condition. i.Manual | Netka System Co. Start date and end date iii. 3. 5. 78 NetkaView Network Manager Accedian NID Module .. . Month Click Show Report button. 6.9. Last 24 Hour. Period (Latest.Ltd. Last Hour.2. How to see PAA Status Summary Report Place a pointer mouse at Report and click Overall Report. Select Source. Place a pointer mouse at Accedian Report. 2.Manual OAV TD TAD TDV TAV One-way Average Delay Variation Two-way Delay Two-way Average Delay Two-way Delay Variation Two-way Average Delay Variation Table 19 PAA Test Status Description Figure 81 PAA Status Summary Report 6. For possible value and description for PAA probe state. Follow the procedure explain in item 6. TD. start date and end date. The report will be displayed. latest status including CC. OAV. destination. OAD. TAV of selected time condition.. please follow this procedure: 1.Manual | Netka System Co. PAA probe name (Operation).NetkaView Network Manager Accedian NID Module .Ltd.9 PAA Status Summary Report.2. ODV.Manual Figure 82 Sample PAA Status Summary Report 6. To export a report as a file.14 Report Exporting. . 2. 6.10 PAA Status Report PAA Status Report shows the state and status of PAA probes.9. TDV.2. PAA type. You can select to view state and status according to source probe. 3. please see in Table 18 PAA Test State Description.2. EPL. For possible value and description for PAA probe status. PAA probe name (Operation).2 How to export PAA Jitter Report To export the PAA Jitter Report that you select. TAD. 79 NetkaView Network Manager Accedian NID Module . PAA Status Report will show you source probe. please follow the procedure explained in item 2. OD. destination. please see in Table 19 PAA Test Status Description. latest state of selected time condition. Manual | Netka System Co.Manual Figure 83 PAA Status Report (Daily) Figure 84 PAA Status Report (Hourly) 80 NetkaView Network Manager Accedian NID Module .Ltd.. .NetkaView Network Manager Accedian NID Module . Select Start and End Date. 81 NetkaView Network Manager Accedian NID Module .Manual | Netka System Co. If end date and start date is 3-8 days interval.10.2. Select PAA Operation name. Click Query button.. If end date and start date is more than 8 days interval. 7. 5. How to see PAA Status Report Place a pointer mouse at Report and click Overall Report. Select Source. Place a pointer mouse at Accedian Report. 4. i.1 1. report will show hourly data. . If end date and start date is 1-2 days interval. 2. iii. 8. ii.Ltd. report will show 5 minute data.NetkaView Network Manager Accedian NID Module .Manual Figure 85 PAA Status Report (5 minute) 6. 3. Click PAA Status. Select Type. 6. Select Destination. report will show daily data. 9. please follow the procedure explained in item 2.10. Generator Node. RFC-2544 Throughput Test Report shows summary results in grid. Flow traffic. 6. . 3. 82 NetkaView Network Manager Accedian NID Module . Stop Date.10 PAA Status Report.Manual | Netka System Co.2 How to export PAA Status Report To export the PAA Status Report that you select. To export a report as a file. Delay and Jitter for each flow. 2. Follow the procedure explain in item 6.Ltd. Generator Description. Start Time. Flow destination.Manual Figure 86 Sample PAA Status Report 6.2.NetkaView Network Manager Accedian NID Module . The summary report contains Flow 1 and Flow 2 Statistic. Start Date. The report will be displayed.2.11 RFC-2544 Throughput Test Report RFC-2544 Throughput Test Report shows the summary report of RFC-2544 throughput test you have provisioned in NNM. please follow this procedure: 1. Flow state.2. The detail report for each flow show results in both graph and grid.14 Report Exporting.. Stop Time. Transmit and Receive rate. Manual Figure 87 RFC-2544 Throughput Test Report (Summary) 6. 3. Click RFC-2544 Throughput Test. Click Query button. 5.Manual | Netka System Co.. Figure 88 Sample RFC-2544 Throughput Test Report – Traffic Flow Detail 83 NetkaView Network Manager Accedian NID Module .2. 4.NetkaView Network Manager Accedian NID Module .1 1. 2. Select Destination. Select Source. 7. 8.Ltd. Click on the to view detail report of each flow. Select Start and End Date. .11. How to see RFC-2544 Throughput Test Report Place a pointer mouse at Report and click Overall Report. Place a pointer mouse at Accedian Report. 6. 2. To export a report as a file.11. 3. please follow this procedure: 1. please follow the procedure explained in item 2.2. 2. Follow the procedure explain in item 6.NetkaView Network Manager Accedian NID Module .14 Report Exporting. The report will be displayed.11 RFC-2544 Throughput Test Report.2 How to export RFC-2544 Throughput Test Report To export the RFC-2544 Throughput Test Report that you select. 84 NetkaView Network Manager Accedian NID Module .Manual Figure 89 Sample RFC-2544 Throughput Test Report (Summary) 6.Manual | Netka System Co.. .Ltd.
Copyright © 2024 DOKUMEN.SITE Inc.