Navtech eCharts EFB for iOSUser Manual Release 15.1 May 2015 Help Version: 1.3 www.navtech.aero The information in this document is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Navtech Inc. Copyright 2015 Navtech Inc. All rights reserved. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Navtech Inc. All trademarks mentioned in this manual are the properties of their respective owners. Navtech Inc. 295 Hagey Blvd., Suite 200, Waterloo, Ontario, Canada N2L 6R5 Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. ii Table of Contents About the User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Style Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Navtech eCharts EFB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .7 eCharts EFB for iOS Requirements . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .7 Installation Instructions . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .7 Chart Revision Box . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 10 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 View/change settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Start Navtech eCharts EFB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. . . . . . . . . . . . . . 14 Menu Button Features . . . . . . . . . . . . . . . . . . . . .. . .. . . . . . . . . . . . . . 15 Quick Navigation Toolbar . . . . . . . . . . . . . . . . . . .. . .. . . . . . . . . . . . . . 15 Turn Off the Quick Navigation Toolbar . . . . . . .. . .. . . . . . . . . . . . . . 16 Defining Your Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Route Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Specify Departure, Alternate and Arrival Aerodrome . . . . . . . . . . . . . . . . . 18 DEP Change Resets Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Consulting Terminal Charts . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 19 View Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 19 Adjust a Chart Screen . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 19 Menu Button . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 19 Chart Details . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 20 Default Charts . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 20 Assign a Chart . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 20 Assign a Chart to a User Tile . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 22 Charts Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 23 View Reference Documents . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . 23 Consulting the Enroute Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Adjust the Enroute Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Double Tap To Access Map Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Layer Tool Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. iii . . 29 Remove an Item from the Clipboard . . . . . .. . . .. . . . . . . . . . . . . 30 Document Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Clipboard . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 27 Document Viewer . . . Select Charts from the Enroute Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv . . . . . . . . 30 Folder Structure . . . . . . . . . . . . . . . . . . .. . . . . . . 29 Add an Item to the Clipboard . . . . . . . . . . . . . . . 29 Display a Clipboard Item . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 30 Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. . . . . . . . . . . . . . . . Graphics are used to provide examples and highlight functionality.About the User Manual This document describes the installation and functionality of Navtech eCharts EFB for iOS. Style Conventions Bold text is used for screen and button names. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. Note Important information is provided in the notes section. 5 . the Enroute screen. and default chart settings for Navtech eCharts EFB.Navtech eCharts EFB Navtech eCharts EFB is a chart and document viewing application for iOS devices. your custom documents and port pages. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. The selection of aerodrome charts available for display with Navtech eCharts EFB is determined by your chart subscription. Navtech eCharts EFB is comprised of the Route screen. 6 . Clipboard and the Document Viewer. the Chart screens. The following chapters describe each of the screens. Aerodrome charts update Packages generated by your chart administrator contain chart updates. • iPad 2 or higher • 6 GB storage free • iOS8 or higher • WiFi access Installation Instructions Contact your system administrator to determine the location and security requirements of the App Store or installation web page. 2 Locate Navtech eCharts in the list of applications and tap to enter settings. For first-time installation.Installation This section describes system requirements and how to install eCharts EFB on your device. 7 . This dialog lists the available revisions. there should be only one revision. Installation may take several minutes depending on your Internet connection. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. To install Navtech eCharts EFB for iOS: 1 Locate and install the Navtech eCharts EFB for iOS app. navigate to iPad Settings. See Chart Revision Box on page 10 for more details. eCharts EFB for iOS Requirements This section lists the minimum requirements to install Navtech eCharts EFB for iOS. 3 When the application is installed. 4 Specify the following information provided by your account manager or system administrator: • Username • Password • Server Name • Company • Subscription • Device Name 5 Exit Settings and open Navtech Charts on the iPad. Consult your Navtech Account Manager for information required to connect to the chart service once installation is complete. 6 Tap the Chart Revision box at the bottom of the Route screen (A) to access the download dialog. Figure 1: tap the chart revision box to begin the download Note You can also tap the chart revision box to view the current status of data loaded on the iPad. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. 7 Tap Download to install the data and charts. 8 . Figure 2: revision download Once the download begins you can watch its progress on the screen. Figure 3: downloading a revision Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. 9 . Do not exit the app until the download is complete. See image downloading a revision on page 9. Note An update interrupted by Internet connection problems will resume automatically when you reconnect. You can tap on the box to download a new revision or view a list of revisions on the iPad. the Active Chart Revision text is light blue while the Current and Next Chart Revision text is white. view the Installation Instructions on page 7 for more information.8 Tap outside the dialog box to dismiss the Navtech Charts Data Download dialog. Current Chart Revision: indicates the chart revision that is currently effective (based on the device time and date settings of the iPad) and is required to safely operate using Navtech eCharts EFB. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. If the active chart revision loaded matches the current chart revision. Tap on the revision box on the Route screen to open the dialog and select the Current Data tab (A). Next Chart Revision: indicates the chart revision that will become effective after the current chart revision. Active Chart Revision: indicates the chart revision that is currently deployed and available in the departure. provided the application has not been closed using the upward swipe. Figure 4: current data You can view the list of revisions loaded on the iPad. Chart Revision Box The Chart Revision box (see the image tap the chart revision box to begin the download on page 8) displays the current status of the revision. alternate and arrival workspaces. 10 . 11 . Figure 6: active revision not matching with current revision Also.Figure 5: active revision matching with current revision If the active revision does not match the current revision. Figure 7: active revision not matching with current revision Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. you will see a message (shown below) stating that the active does not match the current revision on the arrival. while the active revision does not match the current revision. departure and alternate workspaces as well as the document and clipboard workspaces. the Active Chart Revision text is light blue while the Current Chart Revision text is red and the Next Chart Revision text is white. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. This section describes these settings in more detail. 12 . View/change settings Figure 8: iPad .Settings There are multiple defaults once Navtech eCharts has been installed. Default to Night Mode .Navtech eCharts EFB is automatically set to night mode.Navtech Charts Setting screen To view/change settings: 1 Tap Navtech Charts (A) > App Settings 2 Move slider to the left to disable a feature (C). shown right. The image. shows the list of settings with the feature state set to on. turn off/on Not for Operational Use watermark on all charts. SeeLayer Tool Bar on page 26 for more information on the Layer Toolbar. For more info see Operational Use (Charts) . This will change the options on the menu button. On confirmation Navtech eCharts loads aerodromes and tile chart assignments as they were when last accessed. Start Navtech eCharts EFB To start Navtech eCharts EFB: 1 Tap the Navtech Charts icon on the home screen.turn off/on the Quick Access Toolbar. Toggle Map Layers .prevents the iPad from entering sleep mode when the Navtech eCharts app is on screen.turn off/on the Layer Toolbar on the Enroute map. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. Figure 9: Navtech eCharts icon Navtech eCharts EFB opens at the Route screen and asks whether to restore the previous session. Display Status Bar . 13 . This does not override general iPad settings.Disable Device Sleep . Otherwise aerodromes and charts are cleared.turn off/on iPad status bar at top of screen. Show Quick Navigation Toolbar . The menu options vary depending on the screen and if you have the Quick Navigation Tool Bar turned on. 14 . If there are more items than can be shown in the visible menu. Figure 10: menu button Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. It is always present at the bottom right. you can scroll through the list by swiping vertically.Menu Button The Menu button is a key method for interacting with and navigating through the application. Aerodrome Info. Arrival/Departure/Alternate. • Direct links to Supplement Chart Information: Bulletins.Menu Button Features The menu can include: • Links to other screens: Route (main). Invert (day/night). Country RAR. 15 . • Custom documents are added by your chart administrator. if present. • Links to custom documents appear in this menu. • Chart viewing and manipulation tools: Rotate. Clipboard. Quick Navigation Toolbar Figure 11: Quick Navigation Toolbar Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. a link is available from all Navtech eCharts EFB screens. See Settings on page 12 for information on how to turn features on or off. • Link to the Document Viewer. These documents and information are available through the Quick Navigation toolbar. supplement chart information along with the rotate and invert buttons are unavailable from the Menu button. Note If you turn on the Quick Navigation toolbar the buttons to some custom documents. Enroute. Figure 12: touch Exit to return to the previous screen Turn Off the Quick Navigation Toolbar You can turn off the toolbar from the Settings screen. Bulletins (BUL) and Aerodrome Information (ADI) pages. 16 .The Quick Navigation toolbar is located in the lower-left corner of the screen. The letters on the toolbar are grayed out (A) if there are not any pages associated with the chart. Turning off/on the Quick Navigation toolbar affects the Menu button options. Select Exit at the bottom to return to the previous screen. AFB. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. The Clipboard is always accessible. See Settings on page 12 for instructions on how to turn features on and off. It is available from any chart screen. BUL and ADI are not available from the Menu button when you have the Quick Navigation toolbar turned on. Airfield Brief (AFB). It gives you one touch access to view the Clipboard. Defining Your Route The Route screen is the first screen you see when you access Navtech eCharts EFB. 17 . Route Screen The Route diagram (A) reflects a typical work flow. Figure 13: Route screen Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. The Menu button (C) gives access to the Document viewer. You can specify your DEP (departure) and ARR (arrival) aerodromes and access their associated chart screens for quick access to specific charts. Chart screen buttons are enabled when you enter a valid aerodrome code. The Version and Revision Information (B) at the bottom of the page provides information about the current data and the expected date of the next update. It also resets the Document Viewer and the Enroute screen state (except for the last known map position). or ARR (arrival) button.Specify Departure. You must confirm the departure Aerodrome change before you can specify the runway for the entry. The Enroute button is always active. Alternate and Arrival Aerodrome To specify an aerodrome (AD). Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. The on-screen keyboard is modified to speed up the entry of aerodrome and runway codes. Entering a valid aerodrome code activates the button that accesses that chart screen. ALTN (alternate). The on-screen keyboard pops up automatically when you tap an entry field (A). DEP Change Resets Application Changing the departure Aerodrome (DEP) changes the assigned charts and documents. It resets both the ARR and the ALTN codes and clears their associated charts. It provides access to the Enroute map. Only keys that are valid for the next character of the field are enabled. tap the field below the DEP (departure). Partially entered codes trigger the display of shortcut buttons for aerodromes (B) or runway (C) codes that fit the partial entry. 18 . see Assign a Chart to a User Tile on page 22. the tile assignments and viewing options are recalled. Pan If the chart is enlarged (zoom). tile assignments and per-chart viewing options are saved for the duration of the flight. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. 19 . or ALTN button to access a chart from the Route screen. Menu Button The menu button provides options to adjust a chart screen for viewing conditions. To assign a tile. These documents and information are available through the Quick Navigation toolbar.Consulting Terminal Charts This section describes how to view charts in Chart screens. Zoom. Charts screens feature a chart viewer. • Departure displays the DEP chart screen. if you change back to ARR-CYYZ. Adjust a Chart Screen For ARR and ALTN.pinch your fingers together to zoom in or apart to zoom out on the map or chart. Note that ALTN-CYYZ is independent of ARR-CYYZ. you assign tiles and modify the viewing options for ARR-CYYZ charts and then change the aerodrome to ARR-CYVR. Tap menu>Invert. View Charts Tap the DEP. • Enroute displays the Enroute map. Note If you turn on the Quick Navigation toolbar the buttons to some custom documents. Rotating a zoomed map resets the chart to best fit view. See Quick Navigation Toolbar on page 15 for more information on the toolbar. Invert toggles between day viewing and night viewing color schemes. • Alternate displays the ALT chart screen. Grey tiles have no charts assigned. supplement chart information along with the rotate and invert buttons are unavailable from the Menu button. For example. To change from the current screen. ARR. • Route displays the Route screen (entry screen). See Settings on page 12 for information on how to turn features on or off. • Arrival displays the ARR chart screen. tap the menu button and tap the Navtech eCharts EFB screen you want. and the menu button. a tile ribbon with five tiles where charts can be assigned for quick access. Chart screens display charts and supporting information for the specific aerodrome entered on the Route screen. touch and drag the chart to reposition it on the screen. Rotate 90L / Rotate 90R (or arrow button on the toolbar) rotates the chart 90 degrees in the selected direction. Tile categories determine which charts are available for assignment to a tile. SID.Chart Details Displayed charts include an explicit “With Effectivity From” date (WEF). you assign tiles and modify the viewing options for ARR-CYYZ charts and then change the aerodrome to ARR-CYVR. Note that ALTN-CYYZ is independent of ARR-CYYZ. DEP preset categories are: ARPT. Assign a Chart For ARR and ALTN. the chart’s implicit effective date is Monday midnight UTC of its revision week. STAR. the tile assignments and viewing options are recalled. APPR ARR/ALTN preset categories are: ARPT. Default Charts Your chart administrator specifies default charts for an aerodrome. tile assignments and per-chart viewing options are saved for the duration of the flight. 20 . For example. Default charts defined by your chart administrator for the route identified on the Route screen are initially assigned the Chart screen ribbon tiles. Preset categories cannot be changed. You can assign a different chart. if you change back to ARR-CYYZ. APPR Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. If a chart does not have a WEF date. then tap it again to see a popup of available charts. Note Not all types of charts are available for all aerodromes. SID charts are not published for all aerodromes by the civil aviation authorities. to view more buttons.Figure 14: Assign a chart to a SID tile To assign a Chart: 1 Tap the tile (A) you want to change to give focus. 3 Tap the chart (B) you want to assign to the tile. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. 21 ... For example. tap More. 2 If the list exceeds the space available. This functionality becomes disabled when a chart is locked. 3 The list is automatically replaced by the list of available charts for the selected category. To assign a chart to a user tile: 1 Tap the User (A) tile you want to change to display a list of available categories. Note Only categories that have charts for the specified Aerodrome are included in the list. Note Swipe left or right to navigate through the available charts in a category.Assign a Chart to a User Tile Figure 15: Assign a chart to a user tile Assign a chart to a user tile. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. 22 . 2 Tap the category of chart (B) you want to assign to the tile. 4 Tap the chart (C) you want to assign to the tile. The lock button allows you to lock the current view of a chart or document. ARR. It is always located in the left side of the screen. The first button allows you to toggle between day and night mode.Charts Toolbar Figure 16: Charts tool bar The Charts tool bar is visible when viewing Arrival. Aerodrome info. Country RAR. 23 . Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. and ALTN chart screens. When selected the icon turns blue and the plus turns to a minus (A). The paperclip button is unavailable for non-chart PDFs. The next two icons allow you to rotate the chart or document right or left. See Clipboard on page 29 more information. When locked. The paperclip button allows you to add the chart to clipboard for quick access. or bulletins can be viewed for the current aerodrome by selecting them from the menu at the bottom right or the Quick Navigation toolbar. View Reference Documents DEP. icon turns blue (A) and the rotate icons are disabled along with zoom and pan functionality. Alternate and Departure charts and when viewing documents. Tap the lock button a second time to release the current view. and AUTO) are defined by your chart administrator. tapping an aerodrome asks whether you want to load that aerodrome in an ALTN chart screen. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. From any other Navtech eCharts EFB screen. DETAIL controls what information is layered onto the Enroute map.Consulting the Enroute Map The Enroute map allows you to review the flight plan and identify alternate ADs. Alternate ADs are limited to those available in the terminal chart subscription. Figure 17: Enroute Map ERA controls the display of alternates. MAX. Adjust the Enroute Map SCALE controls the width of the map displayed in nautical miles (NM). 24 . The widths assigned to the NORM an WIDE options are defined by your chart administrator. tap menu > Enroute to view the Enroute map. COM controls the display of radio communication frequencies in the bottom right corner (A). • POS highlights (A) all the alternates that appear on the visible portion of the map. The detail profiles (MIN. tap the Enroute button. From the Route screen. When in POS. • OFF turns off the highlighting and you can’t load the aerodrome in the chart screen. pinch your fingers together to zoom in or apart to zoom out on the map. Figure 18: Map screen Tap the list item you want more information about to: • Tap an item on the list to display more information. A box around the selected item appears to indicate it has been selected (A) and the area is highlighted on the map (B). • An information panel in the top right corner is displayed with details about the highlighted item (C) When you are done reviewing information about map features at the tapped location. PAN mode displays the Enroute map using True North orientation. Double Tap To Access Map Data Double tap a map feature to display a popup list of features at the tapped location. tap anywhere outside of the popup list to close the information panel and the list. Zoom.MAP Pan allows panning at the pilot’s discretion (PAN). 25 . Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. Tap the tile for the option you want to change and select from the popup list. 26 .Layer Tool Bar Figure 19: Map Layer Tool bar The Layer tool bar at the top of the map allows you to control map details by turning layers on and off. The tiles for the Enroute map provide additional options for viewing the map. Gray text with a black background indicates that button is inactive and the layer cannot be turned off or on. The buttons have 3 states: Figure 20: layer tool bar button states White text with a black background indicates that the layer is on. See for more information. White text with a gray background indicates that the layer is off. The zoom level and Detail tile (see below for a description) control what buttons are available in the Layer tool bar. You can remove the tool bar in the application settings. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. Select No to return to the map. You can only view charts in your subscription.Select Charts from the Enroute Map Figure 21: subscription chart on the map Tap on an aerodrome (A) on the map to view its charts in the chart viewer. 27 . Charts in your subscription are highlighted blue on the map. Tap Yes (B) on the prompt to confirm that you want to view the charts. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. • Tap the menu button or swipe left from the left bezel to return to the folder structure when in the Document Viewer. Note Select Clipboard beside Document Viewer at the top of the folder structure to access the Clipboard. If you leave the Document Viewer and return during the same session. you will return to the same location in the Document Viewer.Document Viewer Figure 22: iOS document viewer • Tap a folder to display the folder contents. 28 . Swipe left or right to navigate the pages of the chosen folder. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. See image on the previous page. • Your position in the documents folder is held in the folder structure. Note the filename at the top of the screen. • Tap Exit to exit the Document Viewer and return to the last displayed chart. • Tap a document to display it. The clipboard contents are cleared when Navtech eCharts resets. To display a clipboard item: 1 Tap the Menu button in the lower right corner of the Enroute screen or any chart screen and select Clipboard. or a DEP. 29 . see See Clipboard on page 29. The Clipboard is also accessible through the Document Viewer. ARR. and ALTN (alternate) chart screens. in addition to the DEP (departure). for example when you change the DEP airport. Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. 2 A list panel opens on the left side of the screen. Add an Item to the Clipboard Figure 23: paperclip minus button A blue paperclip with a . To add an item to the Clipboard: 1 Display the chart you want to add in either the Document Viewer. 6 To view another item. 5 To view a clipboard item. and you can organize the clipboard to suit your workflow. ARR (arrival).Clipboard The Navtech eCharts clipboard provides another way to organize a subset of charts for quick access. ARR. 3 Tap Clipboard to view the clipboard contents. 3 Tap the clipboard icon on the left. You can add any displayed chart to the clipboard either from the Document Viewer or from one of the chart screens. or a DEP. Display a Clipboard Item The clipboard can hold an unlimited number of charts pertaining to the current flight.sign indicates the item is already on the clipboard Figure 24: paperclip plus button A paperclip with a + sign indicates the item is not on the clipboard. see Document Viewer on page 28 for more information on the Document viewer. tap the item on the list. or ALTN chart screen. tap the list icon at the bottom left to display the clipboard contents and make another selection. The list panel has two modes at the top: Document Viewer and Clipboard. or ALTN chart screen. 2 Display the chart you want to add in either the Document Viewer. 4 To add charts to the clipboard. 30 . Document Viewer If you are currently viewing the document: 1 Tap the Paperclip . 3 Tap Done (D) when complete to return to the clipboard.Remove an Item from the Clipboard There are two ways to remove an item clipboard depending on where you are currently viewing the Chart / Document or if you are in the folder structure. Figure 25: clipboard screen 1 2 Tap the minus icon (C) beside the chart name and then tap Delete. The icon changes to the Paperclip + (plus) button to indicate that the document has been removed from the Clipboard Folder Structure If you are currently in the document structure: 1 Tap Clipboard (A) beside Document Viewer at the top of the screen.(minus) button on tool bar.Tap Edit (B). Figure 26: clipboard screen 2 Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc. .....20 layer tool bar ...............17 Clipboard ...........19 rotate ...................................29 adjust enroute map ...................................................24 system requirements ..7 com ................................................................................................................................................................................................20 adjust enroute map ....................................................................................................................................................25 charts menu button ................................................7 consulting a chart ........................29 select a chart ........17 view charts .........................................................................................24 introduction to Navtech eCharts EFB .................19 charts tool bar ...........................................25 settings .............................................5 com system requirements adjust enroute map ...........5 era access map data .......................22 default charts .........24 invert ..........................28 adjust enroute map ......24 iOS .......................................................................................19 assign ........24 user tile D assign chart ..........................19 era ...............................................................................................24 display item .............................................29 S clipboard scale add item ...............................28 map ...........6 detail ....29 I adjust a chart screen ...............................................................7 zoom ........................................19 detail view reference documents ..................................25 adjust enroute map .......................30 style conventions ..........19 U consulting the enroute map ...........................................................19 default ..............................18 remove item ................24 iOS .................................28 Navtech eCharts EFB User Manual Copyright 2015 Navtech Inc................................20 V define your route ..................................23 remove and item from the clipboard ...23 tool bar iOS .................................................................25 iOS .......................................................................20 reference documents rotate ... 31 .....................................12 scale .....24 iOS .......24 Z display a clipboard item ...........................23 adjust enroute map ..................................................................29 zoom document viewer .....20 P assign chart to a user tile ......................26 assign chart to a user tile ................................................................................................................................................................................23 route screen .............................A E about the user manual ...........................................19 view ...............................................25 L assign a chart ....................................................................................................24 add an item to the clipboard ....19 adjust screen .....30 view ..............................................................19 installation adjust enroute map ......22 position ....................20 R details ............22 M C map chart details ..........