MPG.pdf

Marine Product GuideJANUARY 2011 Table of Contents Twin Disc Marine Product Information . . . . . . . . . . . . . . . . . 3–18 Service Classification Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 19 Important Application Information . . . . . . . . . . . . . . . . . . . . . . 20 Pleasure Craft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21–30 Standard and QuickShift® Marine Transmission Ratings Light Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31–38 Standard and QuickShift® Marine Transmission Ratings Intermediate Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39–50 ENGINEERED TO WORK. REAL HARD. Twin Disc marine products are designed, engineered and built to perform real tasks, really well, in the real world. Sometimes it’s glamorous work; sometimes Standard and QuickShift® Marine Transmission Ratings Medium Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51–60 Standard and QuickShift® Marine Transmission Ratings Continuous Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61–72 Standard and QuickShift® Marine Transmission Ratings Standard and QuickShift Marine Transmission Dimensions . . . . . . . . . . . . . . . . . . . . . 73–78 ® it’s not so pretty. But it’s always necessary. Twin Disc Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81–82 From luxurious pleasure craft to stealthy military vessels to hard working tugs, pushboats, fishing boats, crew boats and supply vessels. Twin Disc products optimize the control of the engine’s horsepower, contributing to the boat’s overall performance, productivity, operating efficiency and cost-effectiveness. Twin Disc marine products propel all kinds of vessels, on all kinds of water, all around the world. NOTHING ELSE COMES CLOSE. It took the vision and determination of acknowledged mechanical innovator and offshore racing enthusiast Howard Arneson to perfect the performance and reliability of surfacepiercing propulsion. It took Twin Disc to further realize the extraordinary capabilities of Arneson Surface Drives for nonracing capabilities — pleasure craft and commercial vessels, as well as military applications. No other marine propulsion system is so adaptable to such a wide range of engine sizes and types. There’s an Arneson model designed specifically to fit virtually every powerplant option, accommodating torque outputs exceeding 30,000 lb-ft. Arneson Surface Drives are the fastest, most efficient, fuel-friendly propulsion systems on the planet. When combined with Twin Disc QuickShift transmissions and EC300 control systems, Arneson surface drives allow you to control your vessel from almost 1 knot to full speed with just a single stroke of the lever. MODEL HORSEPOWER ACCEPTANCE ASD06 ASD08 ASD 10 GASOLINE @ 5200 rpm To 550 To 990 To 1485 DIESEL @ 2400 rpm To 290 To 380 To 565 ASD 11S ASD 14 ASD 15S ASD 15L ASD 16 ASD 18S ASD 18L — To 850 GAS TURBINE To 1400 To 1800 To 2100 To 2400 Contact Twin Disc, Inc. To 10,000 (subject to application) ASD INPUT SHAFT TORQUE LIMITS1 (lbs-ft) 650 1200 2000 3200 4800 8000 11500 13500 16500 21500 30000 NOMINAL SHAFT SIZE (inches) 1.75 2.00 2.50 2.875 3.30 3.50 4.50 4.50 4.50 5.51 6.69 A 135 B 195 B 285 B 415 B 515 B 785 B 1135 A 1500 A 1540 A 1985 A 3200 A 4880 OVERALL EXTERNAL LENGTH (inches) 36 42 53 57 63 71 78 78 87 104 107 THRUST SOCKET DIAMETER (inches) 8 8 10 10 13 15 19 19 20 22.5 24 THRUST SOCKET FLANGE DIAMETER (inches) 8 12 14 14 17 19 21.25 21.25 23 29.5 29.5 TURNING ANGLE (total) 40˚ 40˚ 40˚ 40˚ 40˚ 40˚ 36˚ 36˚ 36˚ 29˚ 29˚ PROPELLER TRIM CONTROL (vertical travel) 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ UNIT WEIGHT (pounds, dry, includes ASD unit, trim and steering cylinders, trim pump, reservoir, mounting hardware and hoses)2 1 Torque ratings shown are nominal and my vary due to vessel characteristics. 3 ASD 12 2 A: Aluminum housings B: Bronze housings 4 Don’t Buy Your Next Boat Without EJS™ The Twin Disc EJS (Express Joystick System) absolutely revolutionizes docking and slow speed maneuvering of diesel powered, conventional shaftline boats. With easy fingertip movements you control direction and speed — instantaneously and intuitively. No lugging. No lurching. No clunking. All thanks to proven QuickShift® transmission and EC300 control technology. The EJS smoothly and simultaneously actuates and controls engines, transmissions and thrusters. You can effortlessly move the boat in any direction and even pivot it on its own axis. Its performance dramatically exceeds any other propulsion system. EJS brings incomparable control and enjoyment to even the most difficult docking situations. Once you try it, you can’t imagine driving your next boat without it. FEATURES ULTIMATE CONTROL IN YOUR HANDS Leading the industry in quality, style and performance, the Twin Disc Power Commander ® electronic control system is designed to interface with all popular electronic engines and transmissions. It is versatile, rugged and easy to install. With literally one finger on one lever, the operator can control the boat’s speed and direction. Multiple drivetrains and multiple control heads can easily be accommodated. And multiple electronic control stations can be placed around the boat. 5 “Push, twist and go” directional maneuvering Proven QuickShift transmission and EC300 control technologies Simultaneously and instantaneously controls engines, transmissions and thrusters During docking, eliminates steering wheel & control lever activities Extremely intuitive responsiveness Ergonomically friendly Remarkably easy to learn 2 EC300SE: Station Expansion option for three additional full control stations. not available for joystick-only stations.EXPRESS JOYSTICK SYSTEM® (EJS™) sample diagram Display4 EC300SE2 EC3001 1 EC300: Standard control system for up to three analog stations or up to eight digital stations and up to eight engine/transmission shaft lines per vessel. 7 EC300SE2 EC3001 Please contact Twin Disc or a Twin Disc authorized distributor for more details. 4 Display option for up to six stations. 3 EC300JS: Express Joystick System option for up to three joystick stations. 8 . RS232. RS485 coms The Twin Disc EC300DP propulsion control package allows instantaneous. Allows up to five control stations Cast aluminum control boxes with cast aluminum bronze levers Express™ ready Advantages Selectable station transfer rules Individual station active indicators Features High thrust rate change competitive with alternative drive packages More than 30x/minute directional reversals Designed for conventional shaft lines Thrust control from 10% of idle engagement to full engine power Individual station neutral indicators Maintain fuel-efficient engine speeds even at low propeller speeds 12 and 24 volt system power compatible Rate of change of thrust direction meets DP2 requirements Enhanced installation. Drivelines can execute directional reversals at variable torque levels more than 30 times per minute to hold station with the full requirements of the DP class. monitoring and maintenance/ service software 9 10 .EC300DP Power Commander Electronic Control System Features Single lever control Upload or keyboard setup Selectable synchronization Trolling valve control option J1939. shockless and virtually constant forward and reverse shifting to keep supply vessels on station as directed by the craft’s dynamic positioning system. 12 . DP1 and DP2 vessels with conventional propellers and up to four (4) engine/ transmission drivelines.Twin Disc DP Interface System (EC300DP) sample diagram Diesel Thruster DP Computer Shipyard Twin Disc TWIN DISC COMMUNICATION MODULES EC300DP EC300DP The Twin Disc EC300DP control system is suitable for DP0. 11 EC300DP Please contact Twin Disc or a Twin Disc authorized distributor for more details. What started with Philip Rolla individually designing and crafting race-winning propellers has grown to become the leader in propeller technology for high-performance pleasure and commercial craft as well as military vessels.72) 60 (82) 85 (189) These values shall be intended as indicative.5 (38) 35 (77) BP 400 400 • 3924 (881) 355 (14) 35 (47) 45 (99) BP 550 550 • 5886 (1322) 400 (15. most efficient propellers in the world. Ask the Twin Disc Technical Department for suggestions on the most suitable configuration.7 (25) 24 (53) BP 300 300 • 2943 (661) 300 (11. 13 14 . manufacture and application.5 (65) 75 (165) BP 600 600 • 5886 (1333) 450 (17.75) 48. Hydraulic Thruster TECHNICAL DATA MODEL Nominal Thrust Kgf • N (lbs) Tunnel I.D. Rolla offers a wide variety of service for every aspect of propeller design. from complete hydrodynamic analysis and engineering capabilities to computational fluid dynamic (CFD) hull analysis to sea trials.83) 18. Rolla stainless steel and NiBrAl propellers range from 16 inches to 10 feet in diameter and are specifically designed for high-performance submerged and Arneson Surface Drive applications.80) 28. Since 1963 the name Rolla has been synonymous with the highest quality. The performances of each thruster depend on several different factors and on the sizing of the hydraulic components.TWIN DISC HYDRAULIC THRUSTERS T ULTIMATE PROPELLER PERFORMANCE. mm (in) Nominal Power kW (hp) Weight kg (lbs) BP 220 220 • 2158 (485) 250 (9. offer much less vibration to the boat and provide all-around smoother running — not to mention the absence of water leaking into the bilge through the stuffing box. along with its attendant coupling.8 liters ­­15 70. cutless bearing. quieter. The SeaProp60 can easily be mounted facing forward or aft. 191 59.PLEASURE KW (HP) Reverse 2800 rpm 3000 rpm 3600 rpm 2. more versatile and simplified engine installation process. 200 317 Ø 209. or strut aft of the engine).38 2. stern tube. With a SeaProp60 saildrive. Sailboat manufacturers and operators alike benefit from this system’s unique but proven design. Also eliminated are the alignment procedures required between the engine and shaft that must be done on the production line.15 2.55 Ø 235 B10x23x29 DIN 5464 39 28 234 Ø 383 405 SeaProp60 can be matched with a variety of fixed or foldable propellers. stuffing box. Gone is the propeller shaft. the sailboat manufacturer will overcome inherent limitations and problems of conventional inboard shaft drive installations with a quicker.50 RATIO Forward 277 18" Max 16 .SAILBOAT HYBRID PROPULSION SYSTEM The SeaProp60 saildrive is a propulsion system for sailboats with engines rated up to 56 kW (75 hp) @ 3600 rpm. and it offers the builder more versatility in engine placement and a smaller ‘footprint’ (no shaft. Because it isn’t constrained by shaft angle or aperture location. 131 120 Experienced sailboat owners recognize saildrives are more efficient.65 SAIL DRIVE SP60 TECHNICAL DATA INPUT RATINGS . whereas the downward angle on a standard shaft means that some of the propeller’s thrust is wasted. and strut. Unlike conventional drivelines.38 34 (46) 36 (50) 44 (60) Max Input Speed: 3800 rpm Dry Weight: 43 kg Oil Quantity: 2. Boat operation will benefit from increased propulsion efficiency with the SeaProp60 saildrive. thrust is parallel to the boat’s waterline.15 43 (59) 46 (63) 55 (75) 2. shaft log. turning generators. 18 . ADVANTAGEs Smooth. Often the MCD is used in conjunction with azimuth thruster. dredges and fire fighting vessels. gradual propeller speed change resulting in improved maneuverability Safer and easier vessel control during slow speed maneuvering and docking Adjustment of propeller speeds below engine speed rating No other marine transmission in the world shifts as fast and smooth as the Twin Disc QuickShift. So you have a steep but smooth power curve. development and operation. SMOOTH SHIFTS conventional transmission. Reducing engine rpm to reduce vessel to 50 rpm or less — allowing you to maneuver at near zero boat speed. QuickShift instantly delivers cushioned torque to the driveline when shifting from neutral to anywhere from full ahead to full reverse. INSTANT POWER TO PROPELLER With its patented. lifting cargo. double-ended ferries. the versatile Twin Disc Marine Control Drive (MCD) has proven its worth in a wide variety of workboat applications. offshore supply vessels. icebreakers. The MCD provides distinct operating advantages for any vessel requiring highly accurate positioning or extreme slow speed maneuverability while splitting main engine power to another operation — driving pumps. It eliminates driveline shock while optimizing power to the driveshaft. an incredible advantage in docking. Not so with QuickShift. It regulates engine Dynamic positioning (DP) capable torque at extremely low speeds to slow the propeller speed down PTO to drive auxiliary equipment is standard Emergency “come home” device per classification requirements 17 FAST. hauling lines. SUPERIOR MANEUVERING CONTROL Divides the power from the main propulsion engine to eliminate the need for auxiliary engines It's difficult for a powerful diesel vessel to go very slowly with a Delivers an instant response when required speed to an acceptable and manageable speed is not possible or Bearing calculated for high universal joint angles at max. whether you go full out or just nudge the throttle. completely internal and integrated clutch actuating system.MARINE CONTROL DRIVE (MCD) With over 30 years of research. And all this happens literally within milliseconds. The MCD represents the best alternative to controllable pitch propellers (CPP). including tugs. power could stall the engine. yet it provides amazing control at near zero vessel speed. sport­-fish charter boats. for product selection assistance. system incompati­bility could result in gear clatter at low speeds. and some inland water tow boats. The responsibility for ensuring that the torsional compatibility of the propulsion system is satisfactory rests with the assembler of the drive and driven equipment. Medium Duty Hour usage of up to 4000 hours/year with up to 80% of operating time at full engine power. Typical applications include planing hull vessels such as fire boats. • Ratings are full power forward or reverse except where specified by “F” (using forward gear train for forward). This rating is also applicable to some bow and stern thruster applications. This duty classification is for usage where some variations in engine speed/power occur as part of normal vessel operation. Continuous Duty For use in continuous operation with little or no variation in engine speed/power settings. Inc. Typical applications include planing hull vessels such as ferries. before and after transmission installation. and others. the driven equipment should be removed and the problem source located and corrected before the engine is started. and also some displacement hull yachts as well as some bow and stern thruster applications. or other applications not conforming to the given service class definitions.e. marine survey societies. At minimum. 19 20 . low load factor usage planing hull vessels where typical full engine throttle operation is less than 10% of total time. tow/tug boats and ocean going vessels. Marine transmissions for use in long range pleasure cruisers. Please consult Twin Disc when use of nonstandard flywheels are contemplated. • Ratings are shown in SAE horsepower (HP). • Ratings apply to right hand engines (i. and patrol/customs boats. Light Duty Relatively low hour usage (less than 1500 hours/year) where full throttle operation is 2 hours out of 12. unless otherwise indicated. independent consultants.. Intermediate Duty Hour usage of up to 2000 hours/year (for models MG-5114 and smaller) and up to 3000 hours/year (for models larger than MG-5114) with 50% of the operating time at full engine rating. fishing boats. • Marine transmission input couplings provided by Twin Disc are configured to interface with engine flywheels which conform to SAE J620 standards. Typical vessels include mid-water trawlers. It is necessary that the engine crankshaft end-play be measured before the driven equipment is installed and rechecked after the driven equipment is installed. counter-clockwise flywheel rotation when viewing rear of engine). • Consult factory for ratings applicable to gasoline engines. gas turbines. • The given data is subject to modifications/corrections without prior notice. Note: Some revenue-producing applications such as Planing Hull Bristol Bay Gillnetter do qualify under Pleasure Craft rating definition. please contact Twin Disc. IMPORTANT APPLICATION INFORMATION • Transmission ratings are based on use of the transmission in a torsionally compatible system utilizing a suitable input torsional coupling.SERVICE CLASSIFICATION DEFINITIONS Pleasure Craft Up to 500 hours/year. • Ratings are for diesel engines at the indicated speeds. IMPORTANT NOTICE Disregarding propulsion system torsional compatibility could cause damage to components in the drive train resulting in loss of mobility. ferries. Twin Disc is prepared to assist in finding solutions to potential torsional problems that relate to the equipment of Twin Disc Incorporated’s supply. The balance of operation at 80% of full engine throttle or less. • Use certified print for installation. The endplay measurements. Engine crankshaft endplay measurement is considered mandatory. Torsional vibration analysis can be made by the engine builder. If not the same. For unusual or unique applications. should be the same. crew/supply boats. • Transmission ratings should equal or exceed the engine’s published ratings for the given application. • Final marine transmission selections are to be confirmed prior to issuance of the purchase order. • Most of the transmissions listed herein are to be mounted directly on the SAE flywheel housing of the engine. sportfish charter boats/patrol boats do not qualify for Pleasure Craft Service. Typical vessels include fishing trawlers. some crew boats. 53. 1.72. 1.48. 2.47. 3 SPEC.94 1.08. 3 SPEC. 2.43 Important – See rating definitions. #3 1. 1.014.14. BW MG-5011 A* PX-9999 3. #3 MG-5050 RV* PX-8760 — MG-5061 SC* PX-11650/-A 1.07.43 1.26.54. 1. 2.28. and torsional compatibility notices on pages 19 and 20. 4. 1.00 1. #3 MG-5061 V* PX-8735 — MG-5062 V* PX-11660/A MGX-5065 SC PX-12410 MGX-5065 A PX-12370 MG-5065 SC PX-11480 MG-5065 A PX-11165 1.78 1. 2.72.40 2. 1.50 1. 2. 1. 1. Ratings shown are in SAE Horsepower (HP).47. 4. 2.53. 4. 2. 3 SPEC. 4. 2.09 2.77. 1. 1. 2.47.51 1. 1.71. BW MG-5011 IV* PX-10290 3.43 1.28. #3 MG-5050 A* PX-12730 1.60 1. 1.00 1.19.06 2.04 2.00 2. 5 MG-5012 SC IT1013079B01 3. 1. 2. 1. 4.12. BW MG-5050 SC* PX-12700 1.54.50.45 2.04 2.40 1. 2. 1.47 1.72. 2.43 1. application information.08.52 2.72.00 2.08.00 2.45 3.45 2. 2.47 1. 4.80. 1. BW MG-5020 SC IT1013049B01 3. 1.04 2. 3.00. 2. BW MG-5005 A IT345ATD0001 3. 2. 3. 2. Metric Horsepower equals SAE times 1.26.13. 1. 2. 2. 2. BW MG-5011 SC* PX-10270 3. 1.08 2. 1. 1.04 2. 1. #3 1. 4. 1. 4.09 2.26.00 2. #3 MG-5061 A* PX-11640/-A 1. 1.26.90 2.26. 1. 1.54 2.12.04 2. 1. 2.54.55 2.50 2. @ 3200 RPM 26 (35) 26 (35) 23 (31) 56 (75) 50 (67) 40 (54) 33 (44) 110 (148) 93 (125) 70 (94) 171 (229) 148 (198) 131 (176) 114 (153) 251 (337) 201 (270) 171 (229) 160 (215) 140 (188) 298 (400) 201 (270) @ 2800 RPM 186 (250) 168 (225) 186 (250) 168 (225) 186 (250) 168 (225) 272 (365) 261 (350) 231 (310) 272 (365) 239 (320) 272 (365) 239 (320) 354 (463) 321 (430) 298 (400) 354 (463) 321 (430) 354 (463) 321 (430) 354 (475) 321 (430) 474 (636) 448 (601) 474 (636) 448 (601) 474 (636) 448 (601) 474 (636) 448 (601) Maximum Speed (rpm) Dry Weight kg (lb) 4500 9 (20) 5000 14 (31) 4500 25 (55) 4500 53 (117) 4000 75 (165) 4500 36 (79) 4000 54 (119) 4400 49 (109) 4400 49 (109) 4400 77 (170) 3300 86 (189) 3300 80 (176) 3300 73 (160) 3300 98 (215) 3300 95 (210) 3300 86 (190) 3300 142 (312) 3200 111 (244) 3200 111 (244) 3200 111 (244) 3200 111 (244) 22 .51 1.26.15.00 2.PLEASURE CRAFT RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS ® 21 Model Drawing Number SAE Housing MG-340 IT101317501 5. 1.80. 1.39 1. 2.08.50. @ 2300 RPM 26 (35) 21 (28) 17 (23) 40 (54) 36 (48) 29 (39) 24 (32) 83 (111) 67 (90) 50 (67) 123 (165) 106 (142) 94 (126) 82 (110) 181 (242) 145 (194) 123 (165) 115 (154) 100 (134) 214 (287) 144 (193) @ 2300 RPM 164 (220) 145 (195) 164 (220) 145 (195) 164 (220) 145 (195) 226 (303) 226 (303) 200 (268) 226 (303) 200 (268) 226 (303) 200 (268) 283 (380) 263 (353) 245 (329) 283 (380) 263 (353) 283 (380) 263 (353) 283 (380) 263 (353) 393 (527) 368 (493) 393 (527) 368 (493) 393 (527) 368 (493) 393 (527) 368 (493) KILOWATTS (HORSEPOWER) @ 2800 RPM 26 (35) 26 (35) 21 (28) 50 (67) 44 (59) 35 (47) 29 (39) 101 (136) 82 (110) 60 (81) 149 (200) 129 (173) 115 (154) 100 (134) 220 (295) 176 (236) 150 (201) 140 (188) 123 (165) 261 (350) 176 (236) @ 2500 RPM 177 (237) 157 (210) 177 (237) 157 (210) 177 (237) 157 (210) 245 (329) 233 (312) 213 (286) 245 (329) 219 (294) 245 (329) 219 (294) 308 (413) 286 (384) 266 (357) 308 (413) 286 (384) 308 (413) 286 (384) 313 (420) 286 (384) 425 (570) 400 (536) 425 (570) 400 (536) 425 (570) 400 (536) 425 (570) 400 (536) * Consult Twin Disc for gasoline engine ratings. 4 SPEC.53. BW MG-5055 A IT101316101 3.43 3. 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.27.75.50 1.47 1.11.04 2. 2.04 2. 3 SPEC. #3 Ratios 1. 1.00 2. 2. #3 1.75.44 1.13.47. 1.52. #3 1.44.83 1.00 2. BW MG-5025 A IT1013170 3.83 2. 2. 2.04 2. 3 SPEC.60 1.50. 4 SPEC. 1. BW MG-360 IT101318505 5. 3 SPEC. 1.50.23. 3 SPEC. 1. 1.53 2.06.77. 2.72. 2. 1.46 2. 1.88 1.88 @ 2300 RPM 423 (567) 380 (510) 373 (500) 423 (567) 380 (510) 373 (500) KILOWATTS (HORSEPOWER) @ 2500 RPM 455 (610) 410 (550) 403 (540) 455 (610) 410 (550) 403 (540) @ 2800 RPM 503 (675) 453 (607) 434 (582) 503 (675) 453 (607) 434 (582) 1.27. 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.05 2.33.77.53 2. 2.49.99. 2.53 2. 1. 1. 1.81.46 392 (526) 423 (567) 468 (628) 3500 150 (330) 1.22. 1. 1. 1.47. 1. #3 MG-5082 SC PX-11250-A 1. 1.77. 2 MG-5095 A PX-11495 1. 3 SPEC. 2.28.06. 1.45. 2.88 Maximum Speed (rpm) Dry Weight kg (lb) 3500 122 (268) 3500 122 (268) 468 (628) 3500 150 (330) 410 (550) 453 (607) 3000 122 (268) 423 (567) 380 (510) 373 (500) 423 (567) 380 (510) 373 (500) 455 (610) 410 (550) 403 (540) 455 (610) 410 (550) 403 (540) 503 (675) 453 (607) 434 (582) 503 (675) 453 (607) 434 (582) 3500 122 (268) 3500 122 (268) 1. 1. 2. 1. 1. #3 1.04 2.88 1.77.53 2.88 1.04 2. 1. 1.014.88 1. 1. #3 MGX-5075 IV PX-12630 MG-5075 SC PX-11876 MG-5075 SC PX-10680/-A 1.16 380 (510) 1. 1. 1. 1. Ratings shown are in SAE Horsepower (HP). 2.77.49. 1.48 1.48 1.81.77. 3 SPEC. 1.52. 1.00.22.53.27. 1. #3 1. 2 MG-5091 SC PX-10016 1. 1. 2.04 2.45.30.52. 2. and torsional compatibility notices on pages 19 and 20. 1. 1.33.47. 2.43 1. 3 SPEC.03.06. #3 MG-5075 A PX-10700/-A 1.71. 2. 1.53. 1. 3 SPEC. application information. #3 MGX-5075 A PX-12610 1. 1. Metric Horsepower equals SAE times 1.71. 2.06.06.81.53.46 2.PLEASURE CRAFT RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 23 Model Drawing Number SAE Housing MGX-5075 SC PX-12620 1.47.53 2.05 2. 2 MGX-5095 RV PX-12550 — MG-5095 SC PX-11535 1.80.05 2. 1. 2.05 2. 0.88 1. 1. 1.33.28.81. 2.43 1.72 2. 2.05 2.96 2.52. 1. 2. 1. 2 MGX-5086 SC PX-12600 1. 2.45 2. 24 . 1. 2 MGX-5095 A PX-12360 1.77. 3 SPEC. 3 SPEC.95 1.22.01.92. 1. 1. 1.72.33 1.06.95 1. 2. 2.77.48 1. 1.28. 3 SPEC. 2.22.06. 1. 1. 2 MGX-5086 A PX-12290 1.04 2.17.22.33.88 1. 3 SPEC. 1. 2 MG-5082 A PX-11040-B 1. 1. 1. 2. 1.03.30.53.05.53 2. 2 MG-5095 RV PX-11600 — 1. 1. #3 MG-5085 A PX-9360-B/-C 1.33. 2. 1.06.53.46 392 (526) 423 (567) 0.28. 1.05 2. 1.52. 2 MG-5090 A PX-10015 1.33. 1. 1.53.53 2. 2. 1. 1.96 2.76 1.48 @ 2100 RPM 416 (558) 374 (502) 343 (460) 416 (558) 374 (502) 343 (460) 490 (657) 462 (620) 428 (574) 490 (657) 462 (620) 428 (574) 490 (657) 462 (620) 428 (574) 490 (657) 462 (620) 428 (574) 480 (643) 433 (580) 409 (548) 484 (649) 433 (580) 544 (730) 510 (684) 560 (751) 521 (699) 560 (751) 521 (699) 544 (730) 510 (684) 560 (751) 521 (699) 560 (751) 521 (699) @ 2300 RPM 433 (580) 410 (550) 365 (490) 433 (580) 410 (550) 365 (490) 522 (700) 492 (660) 447 (600) 530 (710) 492 (660) 447 (600) 522 (700) 492 (660) 447 (600) 530 (710) 492 (660) 447 (600) 522 (700) 474 (635) 447 (600) 530 (710) 474 (635) 597 (800) 560 (751) 597 (800) 560 (751) 597 (800) 560 (751) 597 (800) 560 (751) 597 (800) 560 (751) 597 (800) 560 (751) @ 2500 RPM 459 (615) 445 (597) 388 (520) 459 (615) 445 (597) 388 (520) 543 (728) 521 (699) 465 (624) 543 (728) 521 (699) 465 (624) 543 (728) 521 (699) 465 (624) 543 (728) 521 (699) 465 (624) 539 (723) 500 (670) 470 (630) 539 (723) 500 (670) 634 (850) 608 (815) 634 (850) 599 (803) 634 (850) 599 (803) 634 (850) 608 (815) 634 (850) 599 (803) 634 (850) 599 (803) 3200 120 (265) 3200 123 (270) 3200 135 (298) 3200 135 (298) 3200 135 (298) 3200 135 (298) 3000 220 (485) 3000 216 (475) 3000 190 (419) 3000 185 (407) 3000 178 (392) 3000 190 (419) 3000 185 (407) 3000 178 (392) Ratios Important – See rating definitions. #3 MG-5085 SC PX-9260-B/-C 1.42.33.05.53. 3 SPEC. 2. 2 MGX-5095 SC PX-12480 1.05 2. 2.73. 1.15. 1.04 2.22.95 1.33.53.53 2. 2.05 2.00. 1. 1.71.99. 2.15. 1. 1. #3 MG-5075 IV PX-11530-A 1.04 2. 0 MGX-5145 A PX-12420 1.48.74.03. 1.50 1.59 4.02.20.53. 2 MG-5114 RV PX-9830-A — MG-5114 IV PX-11920 1.73.97 2.05.50 1.28.23. 1. 1.10.96 2.86 1.75.04.90 1.75. and torsional compatibility notices on pages 19 and 20. 4.52 1. 1. 1. 0 MGX-5145 RV PX-12530 — MG-5145 SC PX-10885 1. 1.79. 1.48. 1. 1.92 2.97 2.00 3.28. 1. 1.90 1.23. 1.52 1. 2.17­ 4. 1.75. 1.93:1 3000 for others Dry Weight kg (lb) 203 (447) 3000 270 (595) 3000 360 (793) 701 (940) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2800 for 0. 2. 1.04.74. 1.80. 1. 1.92 2. 0 MGX-5135 A PX-12380 1. 1.74.16. 2.PLEASURE CRAFT RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 25 Model Drawing Number SAE Housing MGX-5114 SC PX-12490 1 MGX-5114 SC-HD PX-12860 1 MGX-5114 DC PX-12170 1 MGX-5114 A 1024390 1.00 1.80. 2. 1.43.20.50.28. 1.92 2. MG-5114 A PX-11915 1.79.03.00 2.59 4. 1. 2. 1. 2. 1.26.57 1.28.33. 2 MGX-5135 SC PX-12450 1.50 1. 2.50.75.75.04. 2. 1.96 2.57 2.93. 1. 1.25.57 0. 4.25.00 2.50 1.50 1.48. 1. application information. 1. 1. Metric Horsepower equals SAE times 1. 1. 1.02. 2. 1.54 3.014. 1. 1. 1.48. 1.52.57 2.86 1.04.48. 0 MG-5135 A PX-11380 1. 1.75.05. 1.03. 1.75. 1.54 3.75.04 2.96 2. 1. 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.20.52 1.75. 1. 3.20. 1. 2.48. 1.04.96 2.04.33. 1. 1. 1. 1. 2. 1.48. 1.50 Important – See rating definitions.03.16. 1. 1.96 2. 2.52. 1.00 3.48.52­ 1.25.48.79.03.12.00 2.04. 2 MG-5114 SC PX-9785-B 1 MG-5114 DC PX-10250-A PX-12195(FS) 1 Ind. 1.26. 3.04 2. 1. 2. 1.12.73.75. 1. 1. 1. 0 MG-5135 RV PX-11945 — MGX-5145 SC PX-12460 1.48. 1. 2.93.50.20. Ratings shown are in SAE Horsepower (HP).50 1. 1. 1.16.79. 0 MGX-5135 RV PX-12520 — MG-5135 SC PX-11590 1. 1. 1. 0 MG-5145 RV PX-10880 — Ratios 0.50 1. 2 MGX-5114 RV PX-11850 — MGX-5114 IV PX-12510 1.25. 0 MG-5145 A PX-10830 1.00 2. 1.53. 1.03.17 4.20.53. 1.16.10. 1. 2.50 1. 1.53.54 3.50 1.26.43. @ 2100 RPM 619 (830) 528 (708) 619 (830) 528 (708) 619 (830) 579 (776) 567 (760) KILOWATTS (HORSEPOWER) @ 2300 RPM 673 (900) 578 (775) 673 (900) 578 (775) 673 (900) 634 (850) 604 (810) @ 2500 RPM 716 (960) 629 (843) 716 (960) 629 (843) 701 (940) 679 (911) 634 (850) 619 (830) 673 (900) Maximum Speed (rpm) 2800 for 0.93:1 3000 for others 203 (447) 3000 368 (810) 619 (830) 673 (900) 701 (940) 619 (830) 599 (803) 619 (830) 528 (708) 619 (830) 579 (776) 567 (760) 673 (900) 649 (870) 673 (900) 578 (775) 673 (900) 634 (850) 604 (810) 701 (940) 677 (908) 716 (960) 629 (843) 701 (940) 679 (911) 634 (850) 619 (830) 673 (900) 701 (940) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2800 284 (625) 2800 280 (617) 2800 258 (568) 2800 284 (625) 2800 280 (617) 2800 258 (568) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 619 (830) 673 (900) 701 (940) 619 (830) 599 (803) @ 2100 RPM 817 (1096) 734 (984) 668 (896) 817 (1096) 734 (984) 817 (1096) 734 (984) 817 (1096) 734 (984) 668 (896) 817 (1096) 734 (984) 817 (1096) 734 (984) 949 (1273) 841 (1128) 949 (1273) 878 (1177) 949 (1273) 878 (1177) 949 (1273) 841 (1128) 949 (1273) 878 (1177) 949 (1273) 878 (1177) 673 (900) 649 (870) @ 2300 RPM 895 (1200) 820 (1100) 746 (1000) 895 (1200) 820 (1100) 895 (1200) 820 (1100) 895 (1200) 820 (1100) 746 (1000) 895 (1200) 820 (1100) 895 (1200) 820 (1100) 1007 (1350) 916 (1228) 1007 (1350) 956 (1282) 1007 (1350) 956 (1282) 1007 (1350) 916 (1228) 1007 (1350) 956 (1282) 1007 (1350) 956 (1282) 701 (940) 677 (908) @ 2450 RPM 954 (1279) 873 (1170) 794 (1065) 954 (1279) 873 (1170) 954 (1279) 873 (1170) 954 (1279) 873 (1170) 794 (1065) 954 (1279) 873 (1170) 954 (1279) 873 (1170) 1050 (1408) 963 (1291) 1050 (1408) 1004 (1346) 1050 (1408) 1004 (1346) 1050 (1408) 963 (1291) 1050 (1408) 1004 (1346) 1050 (1408) 1004 (1346) 26 .48.48.92 2. 1.26.96 2. 1. 2. 92 3. @ 2100 RPM 1070 (1435) 875 (1173) 1070 (1435) 931 (1248) 1070 (1435) 931 (1248) 886 (1188) 742 (995) 886 (1188) 742 (995) 1029 (1380) 984 (1320) 1007 (1350) 715 (959) 1007 (1350) 715 (959) 1335 (1790) 1226 (1644) 1070 (1435) 1326 (1778) 1295 (1737) 1226 (1644) 1056 (1416) 1295 (1737) 1226 (1644) 1056 (1416) 1295 (1737) 1226 (1644) 1056 (1416) 1319 (1769) 1225 (1643) 1103 (1479) 987 (1324) 1430 (1918) 1430 (1918) 1342 (1800) 1430 (1918) 1373 (1841) 1430 (1918) 1373 (1841) KILOWATTS (HORSEPOWER) @ 2300 RPM 1142 (1531) 952 (1277) 1142 (1531) 1014 (1360) 1142 (1531) 1014 (1360) 969 (1300) 800 (1073) 969 (1300) 800 (1073) 1104 (1480) 1081 (1450) 1104 (1480) 782 (1050) 1104 (1480) 782 (1050) 1462 (1961) 1343 (1801) 1172 (1572) 1452 (1947) 1418 (1902) 1343 (1801) 1156 (1550) 1418 (1902) 1343 (1801) 1156 (1550) 1418 (1902) 1343 (1801) 1156 (1550) 1445 (1938) 1342 (1800) 1208 (1620) 1081 (1450) 1566 (2100) 1566 (2100) 1470 (1971) 1566 (2100) 1504 (2017) 1566 (2100) 1504 (2017) @ 2450 RPM 1195 (1603) 1001 (1342) 1195 (1603) 1065 (1428) 1195 (1603) 1065 (1428) 1019 (1366) 841 (1128) 1019 (1366) 841 (1128) 1104 (1480) 1081 (1450) 1104 (1480) 782 (1050) 1104 (1480) 782 (1050) 1557 (2088) 1399 (1876) 1249 (1674) 1518 (2036) 1510 (2024) 1431 (1919) 1232 (1652) 1510 (2024) 1431 (1919) 1232 (1652) 1510 (2024) 1431 (1919) 1232 (1652) 1539 (2064) 1430 (1918) 1287 (1726) 1152 (1545) 1668 (2237) 1668 (2237) 1556 (2087) 1668 (2237) 1602 (2148) 1668 (2237) 1602 (2148) 1430 (1918) 1566 (2100) 1602 (2148) 1534 (2057) 1680 (2253) 1790 (2400) 1864 (2500) 1864 (2500) 1891 (2536) 1526 (2046) 2028 (2720) 2028 (2720) 1891(2536) 1653 (2217) — 2147 (2879) 2001 (2682) 1748 (2343) Maximum Speed (rpm) Dry Weight kg (lb) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2750 (2500 at 1.68. 2. 2.46.55. 0. 1.33. MGX-6599 A 7-40263 1.09.43 1.33. 0 Ind. Weights are approximate and include flywheel housing adapter and flexible input coupling.51–2. 1020675 0.51–2.55.28. 1. application information. 0 Ind.47 2.96 2.51. 0 MGX-5147 A PX-12430-A 1. 1. 2.72. 1.03.73 1.014.28.09. 1.04.21 1. 1.50 1.48. 1. 1. 1.72.03.73 2. MGX-6620 SC 7-40337 0 Ind. 0 Ind. 1.44 2.30.88. 1. 2.19 2.17:1) 2750 (2500 at 1.88.75.21 1. 1. 2. 2. 0 Ind. 2. 2. 1.74. 1.92 3. 0.34.17.32. 2. 1. 1. 0 MGX-5147 RV PX-12540-A MG-5202 SC 1016103-C MG-5203 SC 1016249-A MG-5204 SC 1016250-B MG-6449 A 7-37423 MG-6449 RV 7-37431-A — MGX-6598 DC 7-40379 1. 1.33.74. 2.50 1. 2.76.03.17:1) 587 (1292) 409 (900) 409 (900) 2500 344 (757) 2500 325 (716) 2500 580 (1278) 2500 492 (1084) 2500 488 (1075) 2500 468 (1031) 2500 794 (1747) 2500 575 (1267) 2500 580 (1278) 2500 510 (1123) 2300 (1.47–3.76.48 1.73 1.17.50 1.48. 2. 1. and torsional compatibility notices on pages 19 and 20.44 2.24 2. 00 Ind. 1.07. 1.07. 00 Ind.37 2.81. 1.48.42 2. 1. 1. 1. 1. 2. 2.97.45 2. 1. Ratings shown are in SAE Horsepower (HP). 2.48. 0 Ind. 1. 1. 2. 2.03. 2. 0 Ind.21 Important – See rating definitions. 1.24 2.48. 2. 1. 2.17.48 2.75. 1. MGX-6620 RV 7-40316 — MGX-6650 SC 1002046 MGX-6690 SC 1020674 MGX-6848 SC 27 — 1. 3.30. MGX-6599 RV 7-40336 — MG-6600 DC 7-36712-A 0 Ind. 4. 2. 2.34.93.03. 3. 2.80 3.03.48 1.42 2. 1. 2.93 4.33.57.93.92 3.37) 2500 (2.47.37) 2500 (2.58.93 3.76. 2.33.80 1. 2.51.51–2. 3.66 1.75. 3.03.73. 0 Ind.03.95 1.20.82 1.81.11 4. 00 Ratios 1. 2. MGX-6620 A 7-40264 0 Ind.47.72 5.51. 2.21) 2300 (1. 4. 2.48.48 1.51.26. 1.37) 2500 (2. 1. 2.53.88. 1.15. MGX-6599 SC 7-40384 1.26.48 2.96 2.05 1. 1. 2.07. 1.50.53.21 6. 2. 2. 2.03.21) 1001 (2205) 1001 (2205) 1001 (2205) 28 .72 1.17:1) 2750 (2500 at 1.47–3.PLEASURE CRAFT RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number SAE Housing MGX-5147 SC PX-12470-A 1. 2.96 2.74.21) 2300 (1.51. 2. 1.53. 1.37 2.48 3. 2. Metric Horsepower equals SAE times 1.73.53. 1.51.03. 2. 1.51.44 2.37 2.95 2.47–3. 18.16. 2. 1. 2. application information.52.07.48. @ 1600 RPM 1693 (2270) 1648 (2210) 1466 (1966) 1364 (1829) 1693 (2270) 1682 (2256) 1642 (2202) 1693 (2270) 1682 (2256) 1642 (2202) 2176 (2918) 2091 (2804) 2176 (2918) 2074 (2781) 2176 (2918) 2074 (2781) KILOWATTS (HORSEPOWER) @ 1800 RPM 1905 (2555) 1854 (2486) 1649 (2211) 1534 (2057) 1905 (2555) 1892 (2537) 1847 (2477) 1905 (2555) 1892 (2537) 1847 (2477) 2448 (3283) 2353 (3155) 2448 (3283) 2333 (3129) 2448 (3283) 2333 (3129) @ 2100 RPM 2222 (2980) 2163 (2900) 1924 (2580) 1790 (2400) 2222 (2980) 2207 (2960) 2155 (2890) 2222 (2980) 2207 (2960) 2155 (2890) 2856 (3830) 2745 (3681) 2856 (3830) 2722 (3650) 2856 (3830) 2722 (3650) Maximum Speed (rpm) Dry Weight kg (lb) 2100 1192 (2628) 2100 909 (2000) 2100 909 (2000) 2100 1050 (2310) 2100 1105 (2431) 2100 1105 (2431) 30 .93 1.25 3.43 1.93 1. 0 00 MG-6984 A 7-37028 P-71093 P-71094 Ind. 2.014.96 1.06. MG-61242 RV 7-37049 — Ratios 1. 2.29. Ratings shown are in SAE Horsepower (HP).48.92 3.97. 2.50 2. 2.44 2. MG-61242 A 7-37046 Ind.93 1.44 2.97. 2. 2.52 2. 2.08. 1. Weights are approximate and include flywheel housing adapter and flexible input coupling. 1.07.79 2. Metric Horsepower equals SAE times 1.50 2. 0 00 MG-6984 RV 7-37042 — MG-61242 SC 7-37017 Ind. 2. 2.42.54. 1.PLEASURE CRAFT RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 29 Model Drawing Number SAE Housing MG-6984 SC 7-37008 7-37481 P-71034-B Ind. and torsional compatibility notices on pages 19 and 20.93 Important – See rating definitions.47 2.42.79 2. 77. 1. 1.28.47.49.22. 1.06 2.04 2. 1. 2.33.22.72.43 @ 2100 RPM 389 (522) 348 (467) 321 (430) 389 (522) 355 (476) 321 (430) @ 2300 RPM 404 (542) 383 (514) 342 (459) 404 (542) 383 (514) 342 (459) @ 2500 RPM 429 (575) 416 (558) 362 (485) 429 (575) 416 (558) 362 (485) 3200 120 (265) 3200 123 (270) Important – See rating definitions. Metric Horsepower equals SAE times 1. 1.50 1. 1. 2. #3 MG-5075 IV PX-11530 1. 1. #3 1. * Consult Twin Disc for gasoline engine ratings. 2. #3 MG-5075 A PX-10700/-A 1.00 1. 2. 2.47 1. 2.80. 2.54. 2. 2.00. 1.13. 1. 2.28.47. 3 SPEC.26.53. 1. 2. 1. 1.75 2. 2.76 1.05 2. #3 MGX-5075 IV PX-12630 MG-5075 SC PX-11876 MG-5075 SC PX-10680/-A 1. BW MG-5011 IV* PX-10290 3. 3 SPEC. 2. 1.51 1.06.30. #3 MG-5061 A* PX-11640/-A 1. 1. 2. 1. 2.19. 3. 2. #3 1.04 2. 1.06.51 1. 1.07.53. 1. #3 MG-5050 A* PX-12730 1. 1.77.47 1. 1.75 2.72.44 1.88 @ 2300 RPM 153 (205) 136 (182) 153 (205) 136 (182) 153 (205) 136 (182) 211 (283) 211 (283) 187 (251) 211 (283) 187 (251) 211 (283) 187 (251) 265 (355) 246 (330) 229 (307) 257 (345) 246 (330) 257 (345) 246 (330) 265 (355) 246 (330) 376 (504) 351 (471) 376 (504) 351 (471) 376 (504) 351 (471) 376 (504) 351 (471) 368 (493) 355 (476) 348 (467) 368 (493) 355 (476) 348 (467) 1. 3 SPEC. 1.54. 4. 3 SPEC.53. 1. 1.39 1. 3 SPEC. 1. 1. 1. and torsional compatibility notices on pages 19 and 20.43 1. 1.05 2. 1. 1.80. 2. #3 1. 3 SPEC. 1.08. Ratings shown are in SAE Horsepower (HP). 1. 1.22.50.08.00. 3 SPEC. 4 SPEC.72. 2.83 2. 1. 1.92. 2.11. 1.04 2. 1.26. #3 MG-5050 RV* PX-8760 — MG-5061 SC* PX-11650/-A 1. #3 MGX-5075 A PX-12610 1. 2. 1. 1.01.33.88 1. 1. 2. 2.04 2.13.72.00 1.15. 2. 2.26. 1. 32 .49.00.47. 1.06.47. BW MG-5050 SC* PX-12700 1. 2.04 2.04 2. 2.77. 1.53 2.14. 3 SPEC.54. 3 SPEC. 1. 1. 4. 2.99. 1. 1. 1.53. #3 1. 1.47. 1.96 2.88 Maximum Speed (rpm) Dry Weight kg (lb) 4400 49 (109) 4400 49 (109) 4400 77 (170) 3300 86 (189) 3300 80 (176) 3300 73 (160) 3300 98 (215) 3300 95 (210) 3300 86 (190) 3300 142 (312) 3200 111 (244) 3200 111 (244) 3200 111 (244) 3200 111 (244) 3500 122 (268) 3500 122 (268) 423 (567) 3500 150 (330) 383 (514) 423 (567) 3000 122 (268) 368 (493) 355 (476) 348 (467) 368 (493) 355 (476) 348 (467) 390 (523) 383 (514) 375 (503) 390 (523) 383 (514) 375 (503) 433 (581) 423 (567) 406 (544) 433 (581) 423 (567) 406 (544) 3500 122 (268) 3500 122 (268) 1.44.12.72. 1. 1.014. 2. #3 1.53.06. 3 SPEC.33 1.90 2.27.30. 1.43 1.48.22. #3 1. 1. 3 SPEC. 3. 2. #3 MG-5061 V* PX-8735 — MG-5062 V* PX-11660/-A MGX-5065 SC PX-12410 MGX-5065 A PX-12370 MG-5065 SC PX-11480 MG-5065 A PX-11165 MGX-5075 SC PX-12620 1. 1.00 2. 2. 1.53 2.80.42. 4.50 1. 1.72. application information.26.12.03.53 2.22. 2. #3 MG-5085 A PX-9360-B/-C 1. 3 SPEC. 2. 1.23. 1.53 2.77.50. 2.45 3. 1. 3 SPEC.16 355 (476) 1.04 2.43 3.08. 3 SPEC.26. 2.53.77. #3 MG-5085 SC PX-9260-B/-C 1. 1.22. 1. 1. 0. 1. #3 Ratios KILOWATTS (HORSEPOWER) @ 2500 RPM @ 2800 RPM 165 (221) 174 (233) 146 (196) 157 (211) 165 (221) 174 (233) 146 (196) 157 (211) 165 (221) 174 (233) 146 (196) 157 (211) 228 (306) 254 (341) 216 (290) 223 (299) 198 (266) 216 (290) 228 (306) 254 (341) 204 (274) 223 (299) 228 (306) 254 (341) 204 (274) 223 (299) 288 (386) 323 (433) 268 (360) 300 (402) 248 (333) 279 (374) 281 (377) 313 (420) 268 (360) 300 (402) 281 (377) 313 (420) 268 (360) 300 (402) 292 (392) 331 (444) 268 (360) 300 (402) 407 (546) 453 (607) 381 (511) 428 (574) 407 (546) 453 (607) 381 (511) 428 (574) 407 (546) 453 (607) 381 (511) 428 (574) 407 (546) 453 (607) 381 (511) 428 (574) 390 (523) 433 (581) 383 (514) 423 (567) 375 (503) 406 (544) 390 (523) 433 (581) 383 (514) 423 (567) 375 (503) 406 (544) 1. 3 SPEC.88 1. #3 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.43 1.05 2. 1. 3 SPEC.71.33.46 355 (476) 383 (514) 423 (567) 3500 150 (330) 1. BW MG-5011 A* PX-9999 3.26.03.50. 1.05.LIGHT DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS ® 31 Model Drawing Number SAE Housing MG-5011 SC* PX-10270 3.99. 2.72 2. 2.00 2.08.43 1.33.05 2. 4 SPEC.46 355 (476) 383 (514) 0. 1. 2. 1.04 2.05. Ratings shown are in SAE Horsepower (HP).77.05. 1.04.54 3. 1. 2 MG-5095 RV PX-11600 — MGX-5114 SC PX-12490 1 MGX-5114 SC-HD PX-12860 1 MGX-5114 DC PX-12170 1 MGX-5114 A 1024390 1.53 2. 1. 1.54 3.33.52. 2. 2.52.95 1.46 2.59 4.81. 1. 1.00 3.81. 2.06. 1. 1. 4. 1.48.53. 1.23.96 2. 1. 1.80. 2. and torsional compatibility notices on pages 19 and 20.12.03.50 1. 2. 2.54 3.71. 1.74.04.93:1 3000 for others 203 (447) 3000 368 (810) 580 (777) 629 (843) 656 (880) 3000 206 (455) 580 (777) 629 (843) 656 (880) 3000 198 (435) 580 (777) 560 (751) 629 (843) 607 (814) 656 (880) 632 (848) 3000 270 (595) 34 .03. 2. 2.15.17.59 4.00.77. 4. application information. 2 MG-5114 RV PX-9830-A — MG-5114 IV 33 PX-11920 1.52. 1.92 2.57 Important – See rating definitions. 1.75.47.03. 1.05. 1. 2 MG-5082 A PX-11040-B 1. 1. 2 MG-5114 SC PX-9785-B 1 MG-5114 DC PX-10250-A PX-12195(FS) 1 Ind.43.95 1. 1.45. 1.33.92 2. 2.50.03.53. 1. 1.48 1.15.80. 1.53 2. 1.53.75.75. 1.12. 2. MG-5114 A PX-11915 1. 1. 1.86 1. 1. 2. 1. 1.27. 1.50 1. 1. 1.74 2.77.88 1. 2 MGX-5086 A PX-12290 1.52. 1. 1.48. 2.48. 2. 2 MGX-5095 SC PX-12480 1.05. 1.47. 2. 1. 1.88 1. 1.88 1.86 1. 1. 2.28.04 2.92 2. 2 MGX-5095 RV PX-12550 — MG-5095 SC PX-11535 1.45.52.28. 2.04 2. 2 MGX-5095 A PX-12360 1. 1. 1. 1.02. 1.52.97 2.93. 1.28. 2. 2.00 3. Metric Horsepower equals SAE times 1.00.45 2. 1. 3.06.53. 2 MGX-5086 SC PX-12600 1. 1.17 4. 1. 1.48.46 2. 2 MG-5090 A PX-10015 1. 1. 1.48 1.04 2. 1. 2.81.04. 2.06. 1.97 2.95 1. 1.50 1.28. 1. 2.53 2. 2 MG-5095 A PX-11495 1.23.04.43 1.05.05.93:1 3000 for others 203 (447) 3000 270 (595) 3000 360 (793) 655 (878) 3000 206 (455) 629 (843) 655 (878) 3000 198 (435) 580 (777) 560 (751) 579 (776) 494 (662) 579 (776) 542 (727) 530 (711) 629 (843) 607 (814) 629 (843) 540 (724) 629 (843) 591 (793) 565 (758) 655 (878) 632 (848) 669 (897) 588 (789) 656 (880) 634 (850) 575 (771) 3000 270 (595) 2800 at .05.04.33.81.48 0.43.50.75. 2 MGX-5114 RV PX-11850 — MGX-5114 IV PX-12510 1. @ 2100 RPM 432 (579) 400 (536) 432 (579) 400 (536) 432 (579) 400 (536) 432 (579) 400 (536) 429 (575) 404 (542) 382 (512) 429 (575) 404 (542) 525 (704) 481 (645) 525 (704) 485 (650) 525 (704) 485 (650) 525 (704) 481 (645) 525 (704) 485 (650) 525 (704) 485 (650) 579 (776) 579 (776) 494 (662) 579 (776) 494 (662) 580 (777) 541 (725) 530 (711) KILOWATTS (HORSEPOWER) @ 2300 RPM 460 (617) 418 (560) 460 (617) 418 (560) 460 (617) 418 (560) 460 (617) 418 (560) 471 (632) 442 (593) 418 (561) 471 (632) 442 (593) 560 (751) 522 (700) 560 (751) 522 (700) 560 (751) 522 (700) 560 (751) 522 (700) 560 (751) 522 (700) 560 (751) 522 (700) 629 (843) 629 (843) 540 (724) 629 (843) 540 (724) 629 (843) 629 (843) 540 (724) @ 2500 RPM 487 (653) 434 (582) 487 (653) 434 (582) 487 (653) 434 (582) 487 (653) 434 (582) 495 (664) 467 (626) 439 (589) 494 (662) 434 (626) 593 (795) 554 (743) 594 (797) 558 (748) 594 (797) 558 (748) 593 (795) 554 (743) 594 (797) 558 (748) 594 (797) 558 (748) 669 (897) 669 (897) 588 (789) 669 (897) 588 (789) 655 (878) 634 (850) 576 (772) 580 (777) 629 (843) 580 (777) Maximum Speed (rpm) Dry Weight kg (lb) 3200 135 (298) 3200 135 (298) 3200 135 (298) 3200 135 (298) 3000 220 (485) 3000 216 (475) 3000 190 (419) 3000 185 (407) 3000 178 (392) 3000 190 (419) 3000 185 (407) 3000 178 (392) 2800 at .53 2.20.50. 1. Weights are approximate and include flywheel housing adapter and flexible input coupling. 1.LIGHT DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number SAE Housing MG-5082 SC PX-11250-A 1.71. 1. 2. 1.77. 2.33.04. 2 Ratios 1.02.20.73.20.04 2. 1.014.00 1.04.88 1.28.04 2.57 0.48 1.92 2. 2. 1.27. 1.50 1.06.20.74.28. 1.93. 2 MG-5091 SC PX-10016 1.17 4. 2. 3. 2.71. 1. 1. 2. 1. 0 MGX-5145 RV PX-12530 — MG-5145 SC PX-10885 1. 1. 1.53.52 1. MG-6449 RV 7-37431-A — MGX-6598 DC 7-40379 1.92 3. 2.52 1. 1. 0 MG-5145 RV PX-10880 — MGX-5147 SC PX-12470-A 1.26. 1.04 2.50 1. 1. 2.76.53.75. MGX-6599 SC 7-40384 1. 1.48.07 2.03.73. 1. 1.33.10.48. 1. 1.014. 1. 1. 1.45 2. 1.96 2.74 1. application information. 0 Ind.48 1. 0 MG-5135 RV PX-11945 — MGX-5145 SC PX-12460 1. 1.50 1.48.57. 1. 1. 2.92 3.53.93 4.97.20. 1.48.20. 1.16. 2.26.75.48.48.44 2.90 1.57 2. 1.03 3.48 3.96 2.73 2.17.82 Important – See rating definitions.17. 0 MGX-5147 RV PX-12540-A — MG-5202 SC 1016103-C MG-5203 SC 1016249-A MG-5204 SC 1016250-B MG-6449 A 7-37423 1. 3. 1. 0 MGX-5135 A PX-12380 1.53. 1.48.44 2.75.51.33.00 2. 1.73 2.96 2. 1. 1.96 2.53.04 2.03.79. 1. 2.53. 1.57 2. 1. 0 MGX-5145 A PX-12420 1. 2. 1.48 1.50 1. Metric Horsepower equals SAE times 1.92 3.52 1. 1.16.33. 1.30. 1. 1. 1. 1.26. 1.48.26.LIGHT DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 35 Model Drawing Number SAE Housing MGX-5135 SC PX-12450 1. 0 Ind.00 2.46.50. 1.28. 1.26. 0 MG-5145 A PX-10830 1.48. and torsional compatibility notices on pages 19 and 20.75.90 1.10. 1. Ratios 1.50 1. 1. 0 Ind. 2. 2.96 2. 1.76.16. Weights are approximate and include flywheel housing adapter and flexible input coupling. 2.50 1. 1. 1.48. 1.96 2. 1.03.50 1. 0 MG-5135 A PX-11380 1.25.95 2. 1.48 1. 1. 2.04.73.79.00 2.95 1. 1. 1.16.52 1.07.48. 2.07 2.75.20.17.51.48. 1. 1.33. 1.25. 0 Ind.75. 1. 1. 1.50 1. 1. 1.33. 2.28. 1.96 2.96 2.48.53.03. 0 MGX-5135 RV PX-12520 — MG-5135 SC PX-11590 1. Ratings shown are in SAE Horsepower (HP).03.96 2.43 1.26.25.66.50 1.79.00 2. 1. 1. 1. 1.75.75. 1. 1. 1.33.76. 0 Ind. 2.48. 0 Ind.19 2.25.75. @ 2100 RPM 704 (944) 663 (889) 622 (834) 704 (944) 663 (889) 704 (944) 663 (889) 704 (944) 663 (889) 622 (834) 704 (944) 663 (889) 704 (944) 663 (889) 808 (1084) 759 (1018) 808 (1084) 759 (1018) 808 (1084) 759 (1018) 808 (1084) 759 (1018) 808 (1084) 759 (1018) 808 (1084) 759 (1018) 918 (1231) 828 (1110) 918 (1231) 828 (1110) 918 (1231) 828 (1110) @ 1800 RPM 742 (995) 641 (860) 742 (995) 641 (860) 742 (995) 647 (868) 840 (1126) 795 (1067) 711 (953) 545 (731) 840 (1126) 795 (1067) 711 (953) 545 (731) 1000 (1341) 1000 (1341) 952 (1277) 862 (1156) 1010 (1354) 1001 (1342) 920 (1234) 821 (1101) KILOWATTS (HORSEPOWER) @ 2300 RPM 746 (1000) 716 (960) 671 (900) 746 (1000) 716 (960) 746 (1000) 716 (960) 746 (1000) 716 (960) 671 (900) 746 (1000) 716 (960) 746 (1000) 716 (960) 857 (1150) 820 (1100) 857 (1150) 820 (1100) 857 (1150) 820 (1100) 857 (1150) 820 (1100) 857 (1150) 820 (1100) 857 (1150) 820 (1100) 974 (1306) 895 (1200) 974 (1306) 895 (1200) 974 (1306) 895 (1200) @ 2100 RPM 852 (1142) 731 (980) 852 (1142) 731 (980) 865 (1160) 764 (1025) 978 (1312) 912 (1223) 805 (1080) 635 (852) 978 (1312) 912 (1223) 805 (1080) 635 (852) 1167 (1565) 1155 (1549) 1060 (1421) 990 (1328) 1178 (1580) 1167 (1565) 1073 (1439) 955 (1281) @ 2500 RPM 788 (1057) 768 (1030) 720 (966) 788 (1057) 768 (1030) 788 (1057) 768 (1030) 788 (1057) 768 (1030) 720 (966) 788 (1057) 768 (1030) 788 (1057) 768 (1030) 906 (1215) 881 (1181) 906 (1215) 881 (1181) 906 (1215) 881 (1181) 906 (1215) 881 (1181) 906 (1215) 881 (1181) 906 (1215) 881 (1181) 1028 (1379) 961 (1289) 1028 (1379) 961 (1289) 1028 (1379) 961 (1289) @ 2300 RPM 924 (1239) 789 (1059) 924 (1239) 789 (1059) 979 (1313) 837 (1122) 1072 (1437) 974 (1306) 861 (1154) 696 (933) 1072 (1437) 974 (1306) 861 (1154) 696 (933) 1278 (1714) 1241 (1664) 1131 (1517) 1055 (1415) 1244 (1668) 1234 (1655) 1164 (1561) 1042 (1397) Maximum Speed (rpm) Dry Weight kg (lb) 2800 284 (625) 2800 280 (617) 2800 258 (568) 2800 284 (625) 2800 280 (617) 2800 258 (568) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2750 587 (1292) 2750 409 (900) 2750 409 (900) 2500 344 (757) 2500 325 (716) 2500 580 (1278) 2500 492 (1084) 36 . 1. 2. 2.79.50 1. 2. 0 MGX-5147 A PX-12430-A 1. LIGHT DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 37 Model Drawing Number SAE Housing MGX-6599 A 7-40263 1.73 1. MG-540. 2. 2. 4. 2. 2.03. MGX-6599 RV 7-40336 — MG-6600 DC 7-36712-A 0 Ind. MGX-516 DC.93 1. MGX-5321. 00 Ind.73. Ratings shown are in SAE Horsepower (HP). 3.80 1. 1.51-2.93 1.88. Weights are approximate and include flywheel housing adapter and flexible input coupling.37 2. 2. 2.03) 2500 (2. Ratios 1. MGX-5170 DC. MG-520-1HP.44 2. 2.93 Important – See rating definitions.03.47. MGX-6620 SC 7-40337 0 Ind.93. 0 Ind. 0.52.51. 1.11 4. 1. 2. 2. MGX-5600 and other deep ratio units not listed.03 2.30. 2.07 2. 1. 2.79 2.74. 38 . 2. 2. 2.03. 2.72 5.29.88.24 2.37) 2500 (2.51.18. Metric Horsepower equals SAE times 1. 2. 1.21) 2300 (1. 0 00 MG-6984 RV 7-37042 — MG-61242 SC 7-37017 Ind.21 1.28. MGX-6620 RV 7-40316 — MGX-6650 SC 1002046 MGX-6690 SC 1020674 MGX-6848 SC 1020675 0.47 2. @ 1800 RPM 1092 (1464) 935 (1254) 896 (1202) 1092 (1464) 935 (1254) 896 (1202) 1009 (1353) 926 (1242) 818 (1097) 722 (968) 1109 (1487) 1109 (1487) 1109 (1487) 1080 (1448) 1106 (1483) 1105 (1482) 1106 (1483) 1105 (1482) KILOWATTS (HORSEPOWER) @ 2100 RPM 1221 (1637) 1091 (1463) 1045 (1401) 1221 (1637) 1091 (1463) 1045 (1401) 1177 (1578) 1080 (1448) 953 (1278) 843 (1129) 1294 (1735) 1294 (1735) 1294 (1735) 1255 (1683) 1294 (1735) 1248 (1674) 1294 (1735) 1248 (1674) @ 2300 RPM 1301 (1745) 1195 (1602) 1144 (1534) 1301 (1745) 1195 (1602) 1144 (1534) 1289 (1728) 1182 (1585) 1044 (1400) 923 (1237) 1338 (1794) 1417 (1900) 1417 (1900) 1338 (1794) 1417 (1900) 1330 (1784) 1417 (1900) 1330 (1784) 1225 (1643) 1417 (1900) 1464 (1963) 1225 (1643) 1417 (1900) 1464 (1963) 1591 (2134) 1483 (1989) 1297 (1739) @ 1600 RPM 1614 (2164) 1528 (2049) 1269 (1702) 1180 (1582) 1602 (2148) 1552 (2081) 1536 (2060) 1512 (2028) 1602 (2148) 1552 (2081) 1536 (2060) 1512 (2028) 2064 (2768) 2207 (2691) 1950 (2615) 2090 (2803) 2207 (2691) 1950 (2615) 2090 (2803) 2207 (2691) 1950 (2615) 1828 (2451) 1699 (2278) 1485 (1991) @ 1800 RPM 1816 (2435) 1719 (2305) 1427 (1914) 1328 (1781) 1802 (2416) 1746 (2341) 1728 (2317) 1701 (2281) 1802 (2416) 1746 (2341) 1728 (2317) 1701 (2281) 2322 (3114) 2258 (3028) 2193 (2941) 2351 (3153) 2258 (3028) 2193 (2941) 2351 (3153) 2258 (3028) 2193 (2941) 1985 (2662) 1841 (2469) 1609 (2158) @ 2100 RPM 2119 (2842) 2006 (2690) 1665 (2233) 1549 (2077) 2102 (2819) 2037 (2732) 2016 (2703) 1984 (2661) 2102 (2819) 2037 (2732) 2016 (2703) 1984 (2661) 2709 (3633) 2634 (3532) 2559 (3432) 2743 (3678) 2634 (3532) 2559 (3432) 2743 (3678) 2634 (3532) 2559 (3432) Maximum Speed (rpm) Dry Weight kg (lb) 2500 488 (1075) 2500 468 (1031) 2500 794 (1747) 2500 575 (1267) 2500 580 (1278) 2500 510 (1123) 2300 (1.53. 2.09.21) 1001 (2205) 2100 1192 (2628) 2100 909 (2000) 2100 909 (2000) 2100 1050 (2310) 2100 1105 (2431) 2100 1105 (2431) Consult Twin Disc on light duty ratings for models MG-514C SC/DC.51.014.44 2. 1. 4. 2.47-3.72.50 2.47 2. 3.06.42 2.24 2.21) 1001 (2205) 1001 (2205) 2300 (1.42.09.25 3.58.74. 1.51. 2.48 2.79 2. 2.34.93 1.28. 1.55.42. 0 00 MG-6984 A 7-37028 P-71093 P-71094 Ind. 1. 2.97 2. 2.72 1.37 2.93. 1.97 2. MG-61242 A 7-37046 Ind. MGX-5222 DC.34.51-2. 1.68. 1. 00 Ind.42 2.93 3.47-3.21 1.43 1.05 1. 00 Ind. 2.51. 1. MGX-6620 A 7-40264 0 Ind.48.07 2. 1.37) 2500 (2.32.15 1.03. and torsional compatibility notices on pages 19 and 20. 2. MGX-5225 DC.22 6.44 2.52 2.48.51-2. MG-6984 SC 7-37008 7-37481 P-71034-B Ind.08 2.47-3.16.03.80 3.47.50 2.72.73 1.88.92 3. application information. 1.55. 2. 2.54. MG-61242 RV 7-37049 — 0. 2.96 1.48 2.33.21 1. 3. 2. 1.08. 2.52 4. Weights are approximate and include flywheel housing adapter and flexible input coupling. 2. #3 1. 1. 4.45 3. 2.50 157 (211) 187 (251) 1.43 1. 3 1.52 2. BW MG-5011 A PX-9999 3.53. 2.28.47 201 (270) 239 (320) 261 (350) 3300 95 (210) 1. 1. 1.00 2.06 2. 1.72.72.08 2. 1.47. 2. BW MG-5055 A IT101316101 3. BW MG-360 IT101318505 5.97 2.51 1.53.83.45 2. BW MG-5020 SC IT1013049B01 3.08. 2. BW 1.51 201 (270) 239 (320) 261 (350) 3300 142 (312) 1. BW MG-5010 DC PX-9400 3.04. #3 1. 4.00 2. 2. 2. 1.26. #3 1.60 3. 1. 40 .00. 3 SPEC. BW MG-5011 IV PX-10290 MG-5050 SC PX-12700 MG-5050 A PX-12730 MG-5050 RV PX-8760 XA7022-A XA7048-A MG-506-1 39 MG-5061 SC PX-11650/-A MG-5061 A PX-11640/-A MG-5061 V PX-8735 MG-5062 V PX-11660/-A MGX-5065 SC PX-12410 MGX-5065 A PX-12370 MG-5065 SC PX-11480 MG-5065 A PX-11165 3.11.55 2. 4. 2. #3 1.12.47 201 (270) 239 (320) 261 (350) 3300 95 (210) 1.00. BW MG-5025 A IT1013170 3. 2.04 2. 2. 1. 4. 1. 1. 3 SPEC. #3 — 1. 4.53.39 1.44.08. 1. 2.45 2. 1. 2.75. 2.27.14. 2. 3. 1. 4 SPEC.43 279 (374) 254 (341) 279 (374) 254 (341) 279 (374) 254 (341) 279 (374) 254 (341) 329 (441) 302 (405) 329 (441) 302 (405) 329 (441) 302 (405) 329 (441) 302 (405) 367 (492) 338 (453) 367 (492) 338 (453) 367 (492) 338 (453) 367 (492) 338 (453) 3200 111 (244) 3200 111 (244) 3200 111 (244) 3200 111 (244) Ratios Important – See rating definitions.26. 1. 5 MG-5012 SC IT1013079B01 3.00 3.50.40 2.04 2. 4.54. 2.014. 3 SPEC.54.26.71. 1.50. #3 1. 3 1. 1.50. 1. 2. 4.50. 2. 3 SPEC.77.43.50 2. 2. 3 SPEC. 1.09 2.72. 1.90 2.00 @ 2100 RPM 24 (32) 17 (23) 13 (17) 31 (42) 28 (38) 23 (31) 19 (26) 47 (63) 35 (47) 93 (124) 81 (108) 72 (96) 62 (84) 134 (179) 107 (144) 93 (124) 81 (109) 69 (93) 147 (197) 99 (135) 87 (117) 77 (103) 67 (90) 112 (150) 92 (124) 112 (150) 103 (138) 112 (150) 92 (124) 157 (211) 142 (190) KILOWATTS (HORSEPOWER) @ 2500 RPM 26 (35) 20 (27) 15 (20) 36 (48) 33 (44) 29 (39) 22 (30) 56 (75) 41 (55) 110 (148) 96 (129) 85 (115) 74 (100) 159 (214) 128 (171) 110 (148) 97 (130) 82 (110) 175 (235) 118 (160) 104 (140) 92 (123) 80 (107) 123 (165) 112 (150) 123 (165) 112 (150) 123 (165) 112 (150) 187 (251) 170 (228) @ 2800 RPM 26 (35) 23 (31) 18 (24) 41 (55) 37 (50) 31 (42) 25 (34) 63 (85) 47 (63) 124 (166) 108 (144) 96 (128) 83 (111) 178 (239) 143 (192) 124 (166) 108 (145) 92 (123) 196 (263) 132 (179) 112 (150) 103 (138) 89 (120) 127 (170) 119 (160) 127 (170) 123 (165) 127 (170) 119 (160) 209 (280) 194 (260) 1.78 1.00. 1.04 2. 2. 4. #3 1. 2.04.09. 1. 2.00 2.96 157 (211) 121 (162) 121 (162) 1.15.40 1. 2.80. 1. 1.28. 2. #3 1.94 1.13.07.60 1. 2.50. 2.19. #3 — 1. 4 SPEC. 1.26.47. 1.44 1. 1.52.48. 1. application information. Metric Horsepower equals SAE times 1.13.83 1.23. and torsional compatibility notices on pages 19 and 20.47 1. 2.47.00 Maximum Speed (rpm) Dry Weight kg (lb) 4500 9 (20) 5000 14 (31) 4500 25 (55) 4500 53 (117) 4000 75 (165) 4500 36 (79) 4000 54 (119) 4000 75 (165) 4400 49 (109) 4400 49 (109) 4400 77 (170) 3300 86 (189) 209 (280) 3300 80 (176) 187 (251) 144 (193) 144 (193) 209 (280) 160 (215) 160 (215) 3300 3000 3000 73 (160) 100 (220) 102 (224) 201 (270) 239 (320) 261 (350) 3300 98 (215) 1.04 2.50 1.09 2. 2.47.04 2. Ratings shown are in SAE Horsepower (HP). 1.00. 2.26.50. 2.75.00 1.00 2. 2.INTERMEDIATE DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS ® Model Drawing Number SAE Housing MG-340 IT101317501 5. 2.80. 1. 4. 2. BW MG-5011 SC PX-10270 3.72.26. 1.54.04.43 1.08. 3.12.54. 2. BW MG-5005 A IT345ATD0001 3. 1. 2. 3 SPEC. 1.43 1. 1. 1. 3 SPEC. 1. 1. 2.96 2. 1.22. 1. #3 MG-5075 A PX-10700/-A 1.33 1. 2.06.05.88 1.46 2.88 1. 2.88 1. 1.72.30.17. 2. 1.22.47. 1. 2.05 2. 1. 2 MGX-5095 SC PX-12480 1. 1.05 2.50 5. 3 SPEC.53. 1.46 268 (360) 298 (400) 313 (420) 3500 150 (330) 3000 122 (268) 3500 122 (268) 3500 122 (268) 3500 150 (330) 3000* 259 (572) 3000* 323 (712) 3200 120 (265) 3200 123 (270) 3200 135 (298) 3200 135 (298) 3200 135 (298) 3200 135 (298) 3000 220 (485) 3000 297 (655) 3000 216 (475) 3000 190 (419) 3000 185 (407) 3000 178 (392) 0. 1. 2.53 2.53. 2. #3 MG-5075 IV PX-11530 1. 1.33.53. #3 1.06.28. and torsional compatibility notices on pages 19 and 20. 3 SPEC. 2 MGX-5086 A PX-12290 1. 1.83.53. 2.33 3. 1.22. 1.95 1.30.47.16 268 (360) 298 (400) 313 (420) 1. 2 MGX-5095 A PX-12360 1. 1. 3 SPEC. 1. 0.92.48 Important – See rating definitions. 1.46 268 (360) 298 (400) 313 (420) 1. 3 SPEC.05.05 2. 1. 2 MG-5082 A PX-11040-B 1. 4. 2. 1.03.82 4. 2.43 1. 2. 1. 2 MG-509 41 1.05. 1.33.33.01.27.45.99. 1.05. 1. 2. 2.45.06.71.77. 1. 2.99. 2 MGX-5086 SC PX-12600 1.88 1.95 3.96 2.53 2. 2.81. 1.53 2.88 1.42.22.33. 2. 1.73. #3 1. 3 SPEC.06.014. 1.77.72.45. 1. 1.33. 1.50 4. 3 SPEC.53.06. 2.53.88 @ 2100 RPM 283 (380) 268 (360) 261 (350) 283 (380) 268 (360) 261 (350) 1.00 2.04 2.53 2.28. 1. 2. Metric Horsepower equals SAE times 1.04 2. 2.52. 1.53.77.77.53 2. 2. #3 1. 2.45.04 2. 3 SPEC. application information.52. 1. 1. 1. Ratings shown are in SAE Horsepower (HP). 2 X-9835 1. 1.33. 1.71.04 2.80.53 2.05. #3 MG-5085 SC PX-9260-B/-C MG-5085 A PX-9360-B/-C MG-5082 SC PX-11250-A 1. 2.53.49.53 2. 2 MGX-5095 RV PX-12550 — Ratios KILOWATTS (HORSEPOWER) @ 2500 RPM @ 2800 RPM 310 (416) 324 (434) 298 (400) 313 (420) 287 (385) 306 (410) 310 (416) 324 (434) 298 (400) 313 (420) 287 (385) 306 (410) Maximum Speed (rpm) Dry Weight kg (lb) 3500 122 (268) 3500 122 (268) 1. 1.22.03. 1.39 3. 42 . 1. 2 MG-5091 SC PX-10016 1 MG-5091 DC 1002155 1 MG-5090 A PX-10015 1.06. #3 MGX-5075 IV PX-12630 MG-5075 SC PX-11876 MG-5075 SC PX-10680/-A 1. 1.00. 1.43 235 (315) 235 (315) 216 (290) 165 (220) 235 (315) 180 (242) 287 (385) 268 (360) 287 (385) 268 (360) 351 (471) 340 (456) 351 (471) 340 (456) 351 (471) 340 (456) 351 (471) 340 (456) 354 (475) 336 (450) 268 (360) 321 (431) 298 (400) 251 (336) 343 (460) 321 (430) @ 1800 RPM 368 (493) 332 (445) 367 (492) 336 (451) 367 (492) 336 (451) 273 (366)* 273 (366)* 244 (327)* 190 (255)* 279 (374)* 213 (285)* 332 (445) 302 (405) 332 (445) 302 (405) 396 (531) 384 (515) 396 (531) 384 (515) 396 (531) 384 (515) 396 (531) 384 (515) 403 (540) 374 (501) 309 (415) 377 (506) 350 (470) 298 (400) 365 (490) 343 (460) @ 2100 RPM 410 (550) 380 (510) 410 (550) 380 (510) 410 (550) 380 (510) 300 (400)* 300 (400)* 265 (355)* 210 (280)* 311 (417)* 235 (315)* 365 (490) 328 (440) 365 (490) 328 (440) 428 (574) 415 (557) 428 (574) 415 (557) 428 (574) 415 (557) 428 (574) 415 (557) 425 (570) 403 (540) 346 (464) 420 (563) 384 (515) 334 (448) 382 (512) 359 (481) @ 2300 RPM 438 (587) 412 (552) 438 (587) 409 (548) 438 (587) 409 (548) 1. 2. 2. 1.06. 2. 1.05 2.77.53 2.77.81.33. 1.72. 1. 1.49. 3 SPEC.88 1.15. 2. 1.48 1.77. #3 X-9816-F 1.INTERMEDIATE DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number SAE Housing \MGX-5075 SC PX-12620 1. 2. 1.05 1. 2.33. #3 MGX-5075 A PX-12610 1.95 1.05.95 3. 1. * SAE-14" A6911 driving ring has a 2150 rpm maximum speed. 1. 1. 1. 1. 1. 1. 1.06.76. 2. 3 SPEC. 2.88 283 (380) 268 (360) 261 (350) 283 (380) 268 (360) 261 (350) 310 (416) 298 (400) 287 (385) 310 (416) 298 (400) 287 (385) 324 (434) 313 (420) 306 (410) 324 (434) 313 (420) 306 (410) 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.22.77.48 2. 2. 74. 1. 1.20.04 2.04.02.48.04 2. 1. 2 MGX-5114 RV PX-11850 — MGX-5114 IV PX-12510 1.54 3.54 3.00.00. 6. 1.57 2. 1.00 3. 1.014.23.02.16.25.86 1. 1.93:1 3000 for others 203 (447) 3000 270 (595) 3000 368 (810) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2800 284 (625) 2800 2800 280 (617) 258 (568) 2800 284 (625) 2800 2800 280 (617) 258 (568) 2500 524 (1155) 2500 658 (1450) 44 . 2 MG-5095 A PX-11495 1. 1. application information.54 3.50 1.52.50 1. 2.92.81.50.53. 1. Metric Horsepower equals SAE times 1.04 2. 5.48.16.04 2.00 1.13. 1. 1.04 2.10.59 4.INTERMEDIATE DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 43 Model Drawing Number SAE Housing MG-5095 SC PX-11535 1.95 1.50.80. 1.92.04 2.03. 2.28. 1. 2. 0 MG-5135 A MG-5135 RV PX-11380 PX-11945 MG-514C SC X-9784-C 1.52 1. 2.93. 3.20.20.86 1.50 1. 2. 1.48.48.04 2. 1. 1.93. 1.04 2. 0 — MG-5135 SC PX-11590 1.97 2. 1.52. 0 (14" only) MG-514C DC X-9786-C 1. 1. 2.52.20.73.00.57 0.51. 2. 1.27. 2 MG-5114 RV PX-9830-A — MG-5114 IV PX-11920 1.93:1 3000 for others 203 (447) 3000 270 (595) 3000 360 (793) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2800 at .48.48 1. MG-5114 A PX-11915 1. 2.00. 3.52 1. 2. Ratings shown are in SAE Horsepower (HP). 2. 1. 2 MG-5095 RV PX-11600 — MGX-5114 SC PX-12490 1 MGX-5114 SC-HD PX-12860 1 MGX-5114 DC PX-12170 1 MGX-5114 A 1024390 1.50 4.50. 2. 1.12.46 2.79.00 1. 4. 2.00 3.00 @ 1800 RPM 368 (493) 332 (445) 367 (492) 336 (451) 367 (492) 336 (451) 448 (601) 410 (550) 380 (510) 448 (601) 410 (550) 380 (510) 431 (580) 388 (520) 375 (503) 404 (542) 351 (471) 404 (542) 351 (471) 404 (542) 351 (471) 448 (601) 410 (550) 380 (510) 448 (601) 410 (550) 380 (510) 431 (578) 388 (520) 375 (503) 404 (542) 351 (471) 404 (542) 351 (471) 404 (542) 351 (471) 529 (709) 493 (661) 529 (709) 529 (709) 529 (709) 493 (661) 529 (709) 529 (709) 326 (437) 288 (386) F326 (437) R307 (412) 283 (380) KILOWATTS (HORSEPOWER) @ 2100 RPM 410 (550) 380 (510) 410 (550) 380 (510) 410 (550) 380 (510) 504 (676) 466 (625) 451 (605) 504 (676) 466 (625) 451 (605) 504 (676) 448 (601) 429 (575) 466 (625) 400 (536) 466 (625) 400 (536) 466 (625) 400 (536) 504 (676) 466 (625) 451 (605) 504 (676) 466 (625) 451 (605) 504 (676) 448 (601) 429 (575) 466 (625) 400 (536) 466 (625) 400 (536) 466 (625) 400 (536) 560 (751) 522 (700) 560 (751) 560 (751) 560 (751) 522 (700) 560 (751) 560 (751) 380 (510) 336 (450) F380 (510) R358 (480) 330 (442) @ 2300 RPM 438 (587) 412 (552) 438 (587) 409 (548) 438 (587) 409 (548) 552 (740) 500 (671) 492 (660) 552 (740) 500 (671) 492 (660) 537 (720) 477 (640) 463 (621) 504 (676) 433 (581) 504 (676) 433 (581) 504 (676) 433 (581) 552 (740) 507 (680) 492 (660) 552 (740) 507 (680) 492 (660) 537 (720) 477 (640) 463 (621) 504 (676) 433 (581) 504 (676) 433 (581) 504 (676) 433 (581) 600 (805) 560 (751) 600 (805) 600 (805) 600 (805) 560 (751) 600 (805) 600 (805) 418 (560) 365 (490) F418 (560) R378 (507) 359 (481) Maximum Speed (rpm) Dry Weight kg (lb) 3000 190 (419) 3000 185 (407) 3000 178 (392) 2800 at .28.52 1.79.28.53.92.10. 1.50 1.54 3.80.17 4. 1. 2. 0 — 1.50. 2. 3. 1.25. 2. 1.74. 1. 1. 1.73.50. 1.57 2.15. 2. 2 MG-5114 SC PX-9785-B 1 MG-5114 SC-HD PX-11962 1 MG-5114 DC PX-10250-A PX-12195(FS) 1 Ind. 1. 1. 2. 1. 2.53.00.79.57 1.03.92. 1.48 0.12.43. 4. 1. 1. 2. 1.00.74. and torsional compatibility notices on pages 19 and 20.04 2.75. 2. 1.28. 1.28. Weights are approximate and include flywheel housing adapter and flexible input coupling.59 4.48. 0 MGX-5135 A MGX-5135 RV PX-12380 PX-12520 1.05. 4. 2.47. 1. 1.52 1.00 3.53. 1. 1.81.03. 1.97 2.90 1.04 2.04. 1.03. 1.71. 1. 1.74.25. 1. 1. 0 (14" only) Ratios 1. 1.90 1.50. 1. 1.17 4. 1.23. 1. 1.79.52. 1. 2.16. 2. 1.16 Important – See rating definitions. 2.28. 2.75. 2.43.75. 2 MGX-5135 SC PX-12450 1.25. 1.75.16.05. 1.50 1. 1. 5.96 2.04. 5. 4.50 1. 1. 1. 1.57.75.96. 1. 4.00 3. 5.20.04 4.03.17:1) 2750 (2500 at 1. 1. 1.96 2.95 6.50 4.17:1) 4.53. 0 MGX-5145 A PX-12420 1. 5.17:1) 2750 (2500 at 1.26 3.92 3. 1.48.50.48. 4.03. 1.48.48 1. 1.00 7. 2.96 2. 4.03.03. 1.06. 1. 1.00 7.75. 0 Ind.03. Metric Horsepower equals SAE times 1. 2.26. 1.57. 1. 2.SAE #00 is used with 21” rubber block drive. 4.48.33.18 7. and torsional compatibility notices on pages 19 and 20.60 5.06. 2.03. 2. 2.75.75.96 2.96 2.75.10.17 6.48 1. 1.05 6.96 2. 0 Ind. 1. 0 MG-5145 RV PX-10880 — MGX-5147 SC PX-12470-A 1. 0 MGX-5147 RV PX-12540-A — MGX-516 DC 1023380 (14" only) 1.55.00. 0 Ind. 6. 1. 1.20.17.26.33. 1.46.75.03.42 1. 4.17. 4. 1. 1.58.48.53.26.75.53.49.47 630 (845) * The max.33.96 2.03.50 1.39 1044 (1400) 893 (1198) @ 1600 RPM 986 (1322) 902 (1210) 832 (1116) 986 (1322) 886 (1188) 832 (1116) 700 (939) 667 (894) 1163 (1560) 1022 (1371) @ 1800 RPM 1055 (1415)* 1005 (1348)* 931 (1248)* 1055 (1415)* 988 (1325)* 931 (1248)* 779 (1045)* 742 (995)* 1178 (1580) 1108 (1486) @ 2100 RPM — 1156 (1550)* 1040 (1395)* — 1119 (1501)* 1040 (1395)* 895 (1200)* 850 (1140)* 2400 1754 (3864) 1900* 2100* 2400* 1900* 2100* 2400* 2400* 2400* 2105 (4640) 0 00. 6.50 1.52 5.48. 0 MG-5145 A PX-10830 1. 1. 1.96 6. 1.33. 6.92 3. 1.33. 1. 1. application information.59.75. 3. 1. 1. 1. 2.20.48 @ 1800 RPM 698 (936) 587 (787) 698 (936) 587 (787) 698 (936) 587 (787) 698 (936) 587 (787) 698 (936) 587 (787) 698 (936) 587 (787) 753 (1010) 615 (825) 753 (1010) 615 (825) 753 (1010) 615 (825) 530 (711) 518 (695) 494 (662) 484 (649) 468 (628) 419 (562) 537 (720) 467 (626) 718 (963) 667 (894) 623 (835) KILOWATTS (HORSEPOWER) @ 2100 RPM @ 2300 RPM 746 (1000) 836 (1121) 671 (900) 726 (974) 746 (1000) 836 (1121) 671 (900) 726 (974) 746 (1000) 836 (1121) 671 (900) 726 (974) 746 (1000) 836 (1121) 671 (900) 726 (974) 746 (1000) 836 (1121) 671 (900) 726 (974) 746 (1000) 836 (1121) 671 (900) 726 (974) 806 (1081) 903 (1211) 702 (941) 760 (1019) 806 (1081) 903 (1211) 702 (941) 760 (1019) 806 (1081) 903 (1211) 702 (941) 760 (1019) 573 (768) 594 (797) 549 (736) 569 (763) 521 (699) 540 (724) 510 (684) 526 (705) 492 (660) 508 (681) 470 (630) 498 (668) 578 (775) 578 (775) 545 (731) 561 (752) 837 (1122) 917 (1230) 764 (1025) 828 (1110) 714 (957) 774 (1038) Maximum Speed (rpm) Dry Weight kg (lb) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 717 (1580) 2500 850 (1872) 2500 1559 (3436) 720 (966) 778 (1043) 630 (845) 720 (966) 778 (1043) 727 (975) 630 (845) 858 (1151) 720 (966) 969 (1299) 781 (1047) 2750 (2500 at 1. 1.48.50 1.014. 5.03. 1. 2.17. 6. 1. 1.50 1. Ratios 1.53. 1. 2.59.50 3. 0 MGX-5145 RV PX-12530 — MG-5145 SC PX-10885 1. Ind.06 3.48.48.95 4.50 1.35.91 4. 1.26.96 2. 1.42.10 727 (975) 858 (1151) 869 (1165) 2500 1046 (2304) 3. Ratings shown are in SAE Horsepower (HP). 1. 1. 4.93. 0 MGX-5147 A PX-12430-A 1.48. 00 Ind. 1. 0 Ind.33. 1.48. 0 MGX-5170 DC 1023382 1.11 7.96 2. 2.48. 5.50 1. 5. 6. 1.04.12.92 3.10. Important – See rating definitions. 587 (1292) 409 (900) 409 (900) 46 .INTERMEDIATE DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number SAE Housing MGX-5145 SC PX-12460 1. 1.26.90 3.33. 1.20. 5. 6. 2. 0. 1.76. 0 MG-520-1HP XA-7255-B 0 MG-5202 SC 1016103-C MG-5203 SC 1016249-A MG-5204 SC 1016250-B MGX-5222 DC 1022822-A MGX-5225 DC 1022825-A MGX-5321 DC 1022203-B MG-540 (with rubber block drive) 45 X-9882-C 1. Weights are approximate and include flywheel housing adapter and flexible input coupling. 1. 0 Ind. 1.75.54.76. input speed is 1650 rpm if MG-540 .76.96 630 (845) 720 (966) 778 (1043) 2500 1046 (2304) 4. 07. 5.50. MG-6449 A 7-37423 1. MGX-6620 SC 7-40337 0 Ind.73 Important – See rating definitions.07 2. 3.30.55.96. 4. 1.44 6.60 5.58.32 2.45 2.74.55. 1.48 3.04 1. 4.03.42 2.74.05 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.44 2. MG-5506 00D005604 0. 1. 1.04 5. Metric Horsepower equals SAE times 1. MG-6449 RV 7-37431-A — MGX-6598 DC 7-40379 1.51.03 4. 1. 1.28.53.95 2. 2.63. Ind.73 2.00 7.48 2. 1. 1. 1.93. application information.73 2. MGX-6620 A 7-40264 0 Ind. 2. 2. 5.51.09 2.73 2. MGX-6620 RV 7-40316 — Ratios 1.03. MGX-6599 SC 7-40384 1. 2.04 2.80 3.21 6.19. 1. @ 1600 RPM 1049 (1407) 893 (1198) 1049 (1407) 1038 (1392) 867 (1163) 766 (1027) 718 (963) 1323 (1774) 1197 (1605) 1602 (2148) 1602 (2148) 1598 (2143) 1353 (1814) @ 1800 RPM 769 (1031) 639 (857) 555 (744) 496 (665) 769 (1031) 639 (857) 555 (744) 496 (665) 882 (1183) 849 (1139) 774 (1038) 722 (968) 862 (1156) 844 (1132) 728 (976) 890 (1193) 841 (1128) 815 (1093) 890 (1193) 841 (1128) 815 (1093) 819 (1098) 819 (1098) 777 (1042) 693 (929) 617 (828) 1047 (1404) 1025 (1375) 1019 (1366) 987 (1324) 915 (1227) 1103 (1479) 1028 (1379) 910 (1220) 1103 (1479) 1028 (1379) 910 (1220) KILOWATTS (HORSEPOWER) @ 1800 RPM 1180 (1582) 1011 (1356) 1180 (1582) 1168 (1566) 975 (1307) 861 (1155) 808 (1084) 1489 (1998) 1347 (1806) 1805 (2421) 1805 (2421) 1760 (2360) 1502 (2014) @ 2100 RPM 897 (1203) 746 (1000) 647 (868) 577 (774) 897 (1203) 746 (1000) 647 (868) 577 (774) 1000 (1341) 945 (1267) 861 (1155) 804 (1078) 960 (1287) 940 (1261) 811 (1088) 992 (1330) 937 (1257) 908 (1218) 992 (1330) 937 (1257) 908 (1218) 955 (1281) 955 (1281) 906 (1215) 809 (1085) 719 (964) 1166 (1564) 1142 (1531) 1136 (1523) 1100 (1475) 1019 (1366) 1234 (1655) 1145 (1535) 1014 (1360) 1234 (1655) 1145 (1535) 1014 (1360) @ 2100 RPM — 1193 (1600) — 1362 (1826) 1138 (1526) 1005 (1348) 943 (1265) — — 2105 (2823) 2095 (2809) 1770 (2374) 1717 (2302) @ 2300 RPM 958 (1285) 794 (1065) 692 (928) 617 (828) 958 (1285) 794 (1065) 692 (928) 617 (828) 1067 (1431) 1008 (1352) 918 (1231) 857 (1149) 1023 (1372) 1002 (1344) 864 (1159) 1057 (1417) 999 (1340) 967 (1297) 1057 (1417) 999 (1340) 967 (1297) 1046 (1403) 1018 (1365) 966 (1295) 886 (1188) 788 (1057) 1191 (1597) 1184 (1588) 1184 (1588) 1172 (1572) 1086 (1456) 1315 (1763) 1220 (1636) 1080 (1448) 1315 (1763) 1220 (1636) 1080 (1448) Maximum Speed (rpm) 1900 2400 1900 2100 2400 2400 2400 Dry Weight kg (lb) 2105 (4640) 2000 2200 (4846) 2100 3132 (6890) 2500 344 (757) 2500 325 (716) 2500 580 (1278) 2500 492 (1084) 2500 488 (1075) 2500 468 (1031) 2500 794 (1747) 2500 575 (1267) 2500 580 (1278) 2500 510 (1123) 48 .18 7.72 1.26 3.43 1.72. 2.15. 1.76 6.97.44 2.03 3.51. 2. 4.51. 2.55.00 2.09 2.72 5. 4.11 4. 2. 2.24 2.66.74.91 4.10. Ratings shown are in SAE Horsepower (HP).51.30 4.03 2.46.82 1.17 6. 1. 1.47 4.24 2. 3.73 1.INTERMEDIATE DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model 47 Drawing Number SAE Housing MG-540 (with flexible coupling) X-9882-C 0 00.34.95 1.014. MGX-6599 A 7-40263 1. 0 Ind.07 2. 1. 1.48 2.98. 2. 0 Ind.28. 0 Ind. 2. 4.68. 3.90.03. MGX-5600 1022780 0.42 2.80 1.93 4. 2.72. 2.33. 00 Ind. and torsional compatibility notices on pages 19 and 20. 00 Ind. 0 Ind. MGX-6599 RV 7-40336 — MG-6600 DC 7-36712-A 0 Ind.53.44 2. 1.34. 00 Ind.21 1.52.93 1.37) 2500 (2.88. 1.21) 1001 (2205) 2300 (1.97.06. Maximum Speed (rpm) 2300 (1. 2.03) 2500 (2. 1.03. application information.48.51–2.25 3.21 1. 0 00 MG-6984 RV 7-37042 — MG-61242 SC 7-37017 Ind. 3.51.29. Weights are approximate and include flywheel housing adapter and flexible input coupling.79 2. 00 Ind.51. Ratings shown are in SAE Horsepower (HP). 2.97.07 2. MG-61242 A 7-37046 Ind. 2. 2. 2.47–3.54.18. 2. 2.96 1. 00 Ind.21) 1001 (2205) 2100 1192 (2628) 2100 909 (2000) 2100 909 (2000) 2100 1050 (2310) 2100 1105 (2431) 2100 1105 (2431) 50 . MG-61242 RV 7-37049 — MG-6984 SC MG-6984 A 49 SAE Housing 0.51–2. and torsional compatibility notices on pages 19 and 20.88. 1. 2.03.50. 2.93 1504 (2017) 1462 (1961) 1692 (2269) 1645 (2206) 1974 (2647) 1919 (2573) 1. 1.07 2. 2. 2.79 2.47. 7-37008 7-37481 P-71034-B 7-37028 P-71093 P-71094 Ind.47 2.93.44. 0 00 Ind.93 1504 (2017) 1462 (1961) 2001 (2683) 1960 (2628) 1949 (2614) 2078 (2787) 1949 (2614) 2078 (2787) 1949 (2614) 1692 (2269) 1645 (2206) 2251 (3019) 2205 (2957) 2193 (2941) 2338 (3135) 2193 (2941) 2338 (3135) 2193 (2941) 1974 (2647) 1919 (2573) 2626 (3521) 2571 (3448) 2559 (3432) 2728 (3658) 2559 (3432) 2728 (3658) 2559 (3432) Important – See rating definitions.37.014.INTERMEDIATE DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number MGX-6650 SC 1002046 MGX-6690 SC 1020674 0.51–2. 2.58.92 3. 2. 2. 2. 2.16.42. MGX-6848 SC 1020675 0.44. 2.08 2.47 2.88. 2. Ratios 1. 2.93 1. 1.42. 2. 2.93 3. 1.37) 2500 (2. 1.52.48.21) Dry Weight kg (lb) 1001 (2205) 2300 (1.21 @ 1800 RPM KILOWATTS (HORSEPOWER) @ 2100 RPM @ 2300 RPM 1069 (1434) 1268 (1700) 1386 (1859) 1.51.43 1201 (1611) 1201 (1611) 1201 (1611) 1342 (1800) 1269 (1702) @ 1600 RPM 1470 (1971) 1244 (1668) 1000 (1341) 1380 (1851) 1318 (1767) 1280 (1716) 1566 (2100) 1453 (1948) @ 1800 RPM 1654 (2218) 1399 (1876) 1125 (1509) 1438 (1928) 1386 (1859) 1386 (1859) 1715 (2300) 1575 (2112) @ 2100 RPM 1929 (2587) 1632 (2189) 1313 (1761) 1.47–3.50. 2.47–3. 2.93 3.47. Metric Horsepower equals SAE times 1.03.37 2. 3 SPEC.53. #3 MG-5085 SC PX-9260-B/-C MG-5085 A PX-9360-B/-C MG-5082 SC PX-11250-A 1. 3 SPEC. 2. 2. 2. 2. 1. 1. 2.30. 1. 1.88 1. 2. 2.72.28. 3 SPEC. 2.04 2.53.11. Ratings shown are in SAE Horsepower (HP).12. 2.48. 2.33.05 2.53.44 1. 1. 3. #3 1.05 2.26. 1.99.53. 1. 2.04. #3 — 1.77. BW MG-5011 A PX-9999 3.51 1.00 2.06. 2. 2. 3 SPEC.75.83.53.26. 3 SPEC.05 2. 4. 2. 1. 2. 2.05.05.05.50. 1.49. 2.06. 2. 1.77.50 1. #3 1. 2.47 115 (154) 135 (181) 126 (169) 135 (181) 126 (169) 135 (181) 126 (169) 1.08. 1. 2 1.22.77. 1. Metric Horsepower equals SAE times 1. 3 SPEC. 1.MEDIUM DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS ® 51 Model Drawing Number SAE Housing MG-5011 SC PX-10270 3. 3 SPEC. 1. 1.07. 2. 3 SPEC. 1. 1.06.88 1. 4. 1. 3 SPEC. 2.05. 1.75. 1.71. 2 MGX-5086 A PX-12290 1. 1. 1.47 1. 1. and torsional compatibility notices on pages 19 and 20.80.26.00 1. 1. 1.22.88 1.88 250 (335) 225 (302) 250 (335) 217 (291) 301 (404) 273 (366) 301 (404) 273 (366) 301 (404) 273 (366) 301 (404) 273 (366) 279 (375) 254 (341) 279 (375) 248 (333) 336 (451) 313 (420) 336 (451) 313 (420) 336 (451) 313 (420) 336 (451) 313 (420) 295 (396) 271 (363) 295 (396) 268 (360) 350 (469) 331 (444) 350 (469) 331 (444) 350 (469) 331 (444) 350 (469) 331 (444) Important – See rating definitions. 1. #3 1. 2. 1. 1.06. #3 1. #3 1.53 2. 2.26.47.72.42.27. 1.03.50.00 2.33. 2.53. #3 1. 1.43 3.33 1. #3 1.00 2.53. 1.77. 2 MGX-5086 SC PX-12600 1. #3 1.99. 2.88 1. 52 .51 Maximum Speed (rpm) Dry Weight kg (lb) 4400 49 (109) 4400 49 (109) 4400 77 (170) 3300 86 (189) 140 (188) 3300 80 (176) 128 (172) 157 (211) 147 (197) 157 (211) 147 (197) 157 (211) 147 (197) 140 (188) 171 (229) 160 (215) 171 (229) 160 (215) 171 (229) 160 (215) 3300 73 (160) 3300 98 (215) 3300 95 (210) 3300 95 (210) 135 (181) 157 (211) 171 (229) 3300 142 (312) 1.43 1. Weights are approximate and include flywheel housing adapter and flexible input coupling. 2.05 2. 1. 1.06.30. 1.72.06.06.77.72.50. 1.08.72. 1.04 2.80. 2. 2. 1. 1.44. 3 SPEC.39 1.47.33.88 1. #3 1.26. 2.33. 1.96 2. #3 1.22. 2.77. 3 SPEC. 1. #3 1.50 115 (154) 128 (172) 1.53. BW MG-5011 IV PX-10290 MG-5050 SC PX-12700 MG-5050 A PX-12730 MG-5050 RV PX-8760 MG-5061 SC PX-11650/-A MG-5061 A PX-11640/-A MG-5061 V PX-8735 MG-5062 V PX-11660/-A MGX-5065 SC PX-12410 MGX-5065 A PX-12370 MG-5065 SC PX-11480 MG-5065 A PX-11165 MGX-5075 SC PX-12620 MGX-5075 A PX-12610 MGX-5075 IV PX-12630 MG-5075 SC PX-10680/-A MG-5075 A PX-10700/-A MG-5075 IV PX-11530 3. 2.12. 2. 1.15. 1. 1. 1. 1. 2 MG-5082 A PX-11040-B 1.04 2. 2.33. 1. 2.19. 2.47.00.06. BW 1. 3. 3 SPEC. 1.53. 1.23. 2. 1.54.77. 2. #3 1. 1.43 1.26.53 2. 2. 1. 1.04 2.13. 1. 2. application information. 1. 2. 1. 2. 1.77.45 3.88 1. 1. 4 SPEC.46 205 (275) 230 (308) 246 (330) 3500 150 (330) 205 (275) 230 (308) 246 (330) 3500 122 (268) 205 (275) 230 (308) 246 (330) 3500 122 (268) 3500 150 (330) 3200 120 (265) 3200 123 (270) 3200 135 (298) 3200 135 (298) 3200 135 (298) 3200 135 (298) Ratios 1. 2.53 2.08. 2. 3 SPEC.72. 2. 4 SPEC. 1. 1. 1. 1.53. 2. 1. 1.22.014.04.88 227 (304) 208 (279) 227 (304) 208 (279) 227 (304) 208 (279) 227 (304) 208 (279) 262 (351) 243 (326) 262 (351) 243 (326) 262 (351) 243 (326) 262 (351) 243 (326) 285 (382) 266 (357) 285 (382) 266 (357) 285 (382) 266 (357) 285 (382) 266 (357) 3200 111 (244) 3200 111 (244) 3200 111 (244) 3200 111 (244) 205 (275) 230 (308) 246 (330) 3500 122 (268) 205 (275) 230 (308) 246 (330) 3500 122 (268) 1. 1.33.53.53.53.00 @ 1800 RPM 74 (99) 57 (77) 74 (99) 66 (89) 74 (99) 57 (77) 115 (154) 102 (137) KILOWATTS (HORSEPOWER) @ 2100 RPM 82 (110) 74 (99) 82 (110) 74 (99) 82 (110) 66 (89) 128 (172) 119 (160) @ 2300 RPM 90 (121) 82 (110) 90 (121) 82 (110) 90 (121) 74 (99) 140 (188) 133 (178) 1. 1. 2.03. 2. #3 1. 1. 2. 1. #3 1.33.04 2.54. 1.47.05. 1.43 1.06 2.53. 2.22. 1. 1. 2.13.53 2.00. 3 SPEC.22.05.72. 4.49.47.77. 2. 2. 2. 3 SPEC.43 1.33.43 1. 1. 1. #3 — 1. 2.76.14.08.28.90 2. 1. 1. 1. 1.46 205 (275) 230 (308) 246 (330) 1.54. 1.04. 1. 2 MG-5114 RV PX-9830-A — MG-5114 IV PX-11920 1.04 2.50. 4.45. 1.12.04 2. 54 . 1.28. 1.48. 1. 1.93.81. 0 (14" only) MG-514C DC X-9786-C 1. 2.00 3.75. 5.47. 4.52.71. 1.59.03.52. 1. 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.57 1.86 361 (484) 419 (562) 437 (586) 1. 2 MG-5091 DC 1002155 1. 1.93:1 3000 for others 203 (447) 3000 270 (595) 3000 360 (793) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2800 at . 1.00 1.95 1.81. 1.52.48 1. 4.04 2. 1. and torsional compatibility notices on pages 19 and 20.48. 2 MG-5114 SC PX-9785-B 1 MG-5114 SC-HD PX-11962 1 MG-5114 DC PX-10250-A PX-12195(FS) 1 Ind.MEDIUM DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 53 Model Drawing Number SAE Housing MG-5091 SC PX-10016 1.04.04.15.75. 1.48.03. 4.12.04 2.52. 2. 2. 2 MGX-5114 RV PX-11850 — MGX-5114 IV PX-12510 1. 1.20. 1. 1.04.04 357 (479) 338 (453) 357 (479) 338 (453) 357 (479) 338 (453) 328 (440)* 306 (410) 283 (380) 298 (400) 272 (365) 407 (546) 385 (516) 407 (546) 385 (516) 407 (546) 385 (516) 358 (480)* 336 (450) 313 (420) 334 (448) 309 (415) 440 (590) 417 (559) 440 (590) 417 (559) 440 (590) 417 (559) 377 (505)* 354 (475) 332 (445) 358 (480) 347 (465) Important – See rating definitions. 1. 1.00.50. 1. 2 MGX-5095 SC PX-12480 1.02. application information.57 0.04 2.92.92. 1. 2. 1.52. 1.05. 3.52.73.50. 1. 1. 2. 2.92.20.05.05 1.54 3.50 4. 2.02. 2. 1.74 2. 1. 1.04.48.71.74 2.81.23. 1. 2.75.45. 1. 1. 1.43. 2. 1.17. 2.03. 1.86 @ 1800 RPM 274 (368) 265 (355) 219 (293) 262 (351) 210 (281) 267 (358) 250 (335) 336 (451) 319 (428) 319 (428) 319 (428) 336 (451) 319 (428) KILOWATTS (HORSEPOWER) @ 2100 RPM @ 2300 RPM 317 (425) 347 (465) 308 (413) 330 (443) 254 (340) 274 (368) 303 (406) 330 (443) 245 (328) 268 (359) 309 (415) 321 (430) 291 (390) 302 (405) 374 (502) 399 (535) 360 (483) 385 (516) 358 (480) 385 (516) 358 (480) 385 (516) 374 (502) 399 (535) 360 (483) 385 (516) Dry Weight kg (lb) 3000 220 (485) 3000 297 (655) 3000 216 (475) 3000 190 (419) 3000 3000 185 (407) 178 (392) 3000 190 (419) 319 (428) 358 (480) 385 (516) 3000 185 (407) 319 (428) 394 (528) 394 (528) 361 (484) 394 (528) 394 (528) 361 (484) 358 (480) 451 (605) 451 (605) 410 (550) 451 (605) 451 (605) 410 (550) 385 (516) 489 (656) 489 (656) 443 (595) 489 (656) 489 (656) 443 (595) 3000 178 (392) 2800 at .17.50 5.33 3.04. 2.04.28. 2.47.48 1.97 2.28. 1.45.00 357 (479) 338 (453) 357 (479) 338 (453) 357 (479) 338 (453) 394 (528) 394 (528) 361 (484) 394 (528) 394 (528) 361 (484) 407 (546) 385 (516) 407 (546) 385 (516) 407 (546) 385 (516) 451 (605) 451 (605) 410 (550) 451 (605) 451 (605) 410 (550) 440 (590) 417 (559) 440 (590) 417 (559) 440 (590) 417 (559) 489 (656) 489 (656) 443 (595) 489 (656) 489 (656) 443 (595) 3. 2.46 2. Ratings shown are in SAE Horsepower (HP). 4. 1. 2 — MG-5095 SC PX-11535 1. 2.82.50 1. 4. 4.28.43 1. 1.54 3.54 3. 1. 2.93.00 1.80.17.03. 1. 2 MG-514C SC X-9784-C 1.27.20.51.50.50. 1.97 2.46 2. 2 MG-5095 A PX-11495 1.04.43.13.00.50 1.92.20. 1.50 3.15.50 1. 1.74 2. 2 MG-5090 A PX-10015 1. 1.74 2. 2.96 2.23. 1.014. 2 MG-5095 RV PX-11600 — MGX-5114 SC PX-12490 1 MGX-5114 SC-HD PX-12860 1 MGX-5114 DC PX-12170 1 MGX-5114 A 1024390 1.16 6.81. 2. 1. 1.28. 2.80. 1.95 3. 1.50 1.00 3.00.93:1 3000 for others 203 (447) 3000 270 (595) 3000 368 (810) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2500 524 (1155) 2500 658 (1450) 361 (484) 419 (562) 437 (586) 1. Metric Horsepower equals SAE times 1. 4 (14" only) Ratios 1. 3. 2 MGX-5095 A MGX-5095 RV PX-12360 PX-12550 1. 1. 2.54 3. 2.95 1.04. 4. 1. 1.27.59.28. 2.75.71. Maximum Speed (rpm) * Requires 230 PSI coontrol pressure. 2. 1.48 1. 2. MG-5114 A PX-11915 1.48 0. 17. 1. 0 — MG-5135 SC PX-11590 1.50 1. 2.35.33.52 1.96 2. 2.00. 6. 1.76. 4. 3.03.57 2.33. 1. 4.16.50 3. 2. 0 (14" only) MGX-5170 DC 1023382 1. 0 MGX-5147 RV PX-12540-A — MGX-516 DC 1023380 1.25. 1.20. Weights are approximate and include flywheel housing adapter and flexible input coupling.75. 6. 2.48.10.48. 2. 56 .50 1.42. 1. 0 Ind. 1. 1.96 2.79. 1. 2. 1. 1.53.96 2.48.17:1) 409 (900) 540 (724) 600 (805) 678 (909) 2500 1046 (2304) 2500 1046 (2304) 2400 1754 (3864) 1900* 2100* 2400* 1900* 2100* 2400* 2400* 2400* 2019 (4450) 2105 (4640) 4. 0 MG-5145 A PX-10830 1. 4.90 1.60 5.75. 2.75. 1. 1.26 3. 0 — MGX-5145 SC PX-12460 1.50 1.95 4. 2. 4.53. 1.96 @ 1600 RPM 447 (599) 413 (554) 447 (599) 447 (599) 447 (599) 413 (554) 447 (599) 447 (599) 553 (742) 473 (634) 553 (742) 473 (634) 553 (742) 473 (634) 553 (742) 473 (634) 553 (742) 473 (634) 553 (742) 473 (634) 623 (835) 500 (671) 623 (835) 500 (671) 623 (835) 500 (671) 397 (532) 365 (489) 475 (637) 415 (557) 609 (817) 580 (778) 542 (727) KILOWATTS (HORSEPOWER) @ 1800 RPM @ 2100 RPM 485 (650) 542 (727) 448 (601) 500 (671) 485 (650) 542 (727) 485 (650) 542 (727) 485 (650) 542 (727) 448 (601) 500 (671) 485 (650) 542 (727) 485 (650) 542 (727) 596 (800) 637 (854) 522 (700) 597 (801) 596 (800) 637 (854) 522 (700) 597 (801) 596 (800) 637 (854) 522 (700) 597 (801) 596 (800) 637 (854) 522 (700) 597 (801) 596 (800) 637 (854) 522 (700) 597 (801) 596 (800) 637 (854) 522 (700) 597 (801) 671 (900) 714 (957) 552 (740) 631 (846) 671 (900) 714 (957) 552 (740) 631 (846) 671 (900) 714 (957) 552 (740) 631 (846) 447 (600) 465 (624) 406 (544) 425 (570) 537 (720) 578 (775) 459 (615) 499 (669) 685 (919) 799 (1071) 645 (865) 739 (991) 603 (809) 691 (927) Dry Weight kg (lb) 2800 284 (625) 2800 2800 280 (617) 258 (568) 2800 284 (625) 2800 2800 280 (617) 258 (568) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 717 (1580) 2500 850 (1872) 2500 1559 (3436) 540 (724) 600 (805) 678 (909) 2500 587 (1292) 540 (724) 600 (805) 678 (909) 2500 409 (900) 633 (849) 540 (724) 716 (960) 600 (805) 797 (1069) 678 (909) 2750 (2500 at 1.52 1.96 2. 1. 1.96 2.92 3. 0 MGX-5145 RV PX-12530 — MG-5145 SC PX-10885 1.10. 4.25.04. 5. 1.48 1.73. 1.00 3. 1. 6.48. 2. 1.04.55. 0 MGX-5135 A MGX-5135 RV PX-12380 PX-12520 1. 2.54.07. 2. 1. 3. 1. 5.57 2. 1.48 4. 0 MGX-5145 A PX-12420 1.53.49. 1.73. 1. 0 MG-520-1HP XA-7255-B 0 MG-5202 SC 1016103-C MG-5203 SC 1016249-A MG-5204 SC 1016250-B MGX-5222 DC 1022822-A MGX-5225 DC 1022825-A MGX-5321 DC MG-540 (with rubber block drive) 55 1022203-B X-9882-C 1. 2.53.91 4. 1.50.00. 1. 4.33. 6. 1. 1. Maximum Speed (rpm) * The max. 0 MGX-5147 A PX-12430-A 1. 1.SAE #00 is used with 21” rubber block drive. 5. 1.04. 4.10.79.53.03. application information. 0 Ind. input speed is 1650 rpm if MG-540 .53.96 2.52 1. 1.48. 2.96 6. 1. Ratios 1.48.26. 1.06. 2.16.33.50 1. 1. 1. 3. 0 00.48 1.04. 2. 4.25. 5. 2. 2.20.014. 0 MG-5135 A MG-5135 RV PX-11380 PX-11945 1.46 5. 1. 1.50 1.76.75. 1.33.26.42 1.16.48.04. 1.92. 1.16.00.28. 1.76.00. 1. 6.33.75. 1. 1.18 7. Ratings shown are in SAE Horsepower (HP). 0 Ind. 0 Ind.10. 4.47 928 (1244) 865 (1160) 776 (1041) 746 (1000) 666 (893) 597 (800) 732 (982) 662 (888) 636 (853) 519 (696) 492 (660) 1044 (1400) 956 (1282) 863 (1157) 924 (1239) 855 (1147) 776 (1041) 917 (1230) 847 (1136) 820 (1100) 681 (913) 651 (873) 1069 (1434) 1035 (1388) 967 (1297) 999 (1340)* 950 (1274)* 866 (1161)* 990 (1328)* 941 (1262)* 913 (1224)* 762 (1022)* 740 (992)* Important – See rating definitions. 5. 1.79. 1. 1. 1.MEDIUM DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number SAE Housing MGX-5135 SC PX-12450 1.03 2.50.48.48. 3.48.03 2.17.59.53. 1. 1.03.92.90 1. 1.03.48. 2.96.52 1. 1.26.48.50 1.59.53. 1.00 7.75.03.96 2.26. 2.48. 2.79.39 1. and torsional compatibility notices on pages 19 and 20.48.03. 1. Ind.52.20. Metric Horsepower equals SAE times 1. 1. 4. 2.00 7.11 7.03. 1.50 1.17 6. 0 Ind.06.26.50 1. 5. 1.96 2. 5. 1. 1.75.05 6.57.28.57. 5.75.33.12.20. 1. 1. 6. 1. 0 MG-5145 RV PX-10880 — MGX-5147 SC PX-12470-A 1.90 3. 1.10 644 (864) 727 (975) 787 (1055) 3. 1.93. 1.25.17. 1.95 6.58.00. 00 Ind.96 2. 0.75. 28.03. 5. MG-6449 RV 7-37431-A — MGX-6598 DC 7-40379 1.44 6. 1.04 5.46.60 5.44 2.58. 2.55.51.18 7.93.95 1.45 2.03.55. Ratings shown are in SAE Horsepower (HP).96. MGX-6599 SC 7-40384 1. 00 Ind.90 3.55. 00 Ind. 4. 4.014.07 2. and torsional compatibility notices on pages 19 and 20.42 2. 0 Ind.73 1. 1.15. MG-6449 A 7-37423 1.07.03 3. 4.44 2. 2. 0 Ind.82 1.72.51.98.73 2. 2. 2.95 2.MEDIUM DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model 57 Drawing Number SAE Housing MG-540 (with flexible coupling) X-9882-C 0 00. 2.47 4.74.74. MGX-6620 RV 7-40316 — Ratios 1.33. 1. 3. 1. iMGX-6620 SC 7-40337 0 Ind.00 7. 1. application information.42 2.51.51.19.34. 1. 1.05 1.80 3. 2. 1.68. 1.66. @ 1200 RPM 787 (1055) 869 (1165) 648 (869) 787 (1055) 774 (1038) 644 (864) 571 (766) 535 (717) 960 (1287) 869 (1165) 1230 (1649) 1200 (1609) 1016 (1362) @ 1600 RPM 680 (912) 565 (758) 494 (662) 435 (583) 680 (912) 565 (758) 494 (662) 435 (583) 759 (1018) 717 (961) 653 (876) 609 (817) 713 (956) 713 (956) 615 (825) 754 (1011) 711 (953) 654 (877) 754 (1011) 711 (953) 654 (877) 884 (1185) 861 (1155) 834 (1118) 773 (1037) 884 (1185) 861 (1155) 834 (1118) 773 (1037) 926 (1242) 868 (1164) 769 (1031) 926 (1242) 868 (1164) 769 (1031) KILOWATTS (HORSEPOWER) @ 1600 RPM 1049 (1407) 1034 (1387) 864 (1159) 1049 (1407) 1032 (1384) 859 (1152) 762 (1022) 715 (959) 1281 (1718) 1159 (1554) 1598 (2143) 1566 (2100) 1309 (1755) @ 1800 RPM 741 (994) 617 (827) 537 (720) 489 (656) 741 (994) 617 (827) 537 (720) 489 (656) 824 (1105) 779 (1045) 710 (952) 662 (888) 774 (1038) 774 (1038) 668 (896) 820 (1100) 772 (1035) 709 (951) 820 (1100) 772 (1035) 709 (951) 960 (1287) 935 (1254) 906 (1215) 839 (1125) 960 (1287) 935 (1254) 906 (1215) 839 (1125) 1021 (1369) 943 (1265) 835 (1120) 1021 (1369) 943 (1265) 835 (1120) @ 1800 RPM 1180 (1582) 1163 (1560) 972 (1303) 1180 (1582) 1161 (1557) 966 (1295) 857 (1149) 804 (1078) 1441 (1932) 1304 (1749) 1760 (2360) 1737 (2329) 1451 (1946) @ 2100 RPM 833 (1117) 695 (932) 602 (807) 570 (764) 833 (1117) 695 (932) 602 (807) 570 (764) 918 (1231) 868 (1164) 790 (1059) 737 (988) 862 (1156) 862 (1156) 744 (998) 910 (1220) 860 (1153) 790 (1059) 910 (1220) 860 (1153) 790 (1059) 998 (1338) 998 (1338) 998 (1338) 935 (1254) 998 (1338) 998 (1338) 998 (1338) 935 (1254) 1132 (1518) 1050 (1408) 930 (1247) 1132 (1518) 1050 (1408) 930 (1247) Maximum Speed (rpm) 1900 2100 2400 1900 2100 2400 2400 2400 Dry Weight kg (lb) 2019 (4450) 2105 (4640) 2000 2200 (4846) 2100 3132 (6890) 2500 344 (757) 2500 325 (716) 2500 580 (1278) 2500 492 (1084) 2500 488 (1075) 2500 468 (1031) 2500 575 (1267) 2500 794 (1747) 2500 580 (1278) 2500 510 (1123) 58 .74. 1.30.97.53. MG-5506 00D005604 0.09 2.26 3. 2. Weights are approximate and include flywheel housing adapter and flexible input coupling.03.07 2. 1.04 1. 2.28.73 2. MGX-6620 A 7-40264 0 Ind.51. 1. 2. MGX-6599 RV 7-40336 — MG-6600 DC 7-36712-A 0 Ind.72 5.72 1.93 4.72.43 1.32 2. 2. 4.24 2. 2. 0 Ind.30.63. 1.91 4.34. Ind. 2. 2.11 4. 4.00 2. 5.73 Important – See rating definitions.03.17 6.09 2. 4.53.50.80 1.22 6. 2.48 3. MGX-6599 A 7-40263 1.48 2. 1. 4.76 6. Metric Horsepower equals SAE times 1.04 2. 3.24 2. 0 Ind.48 2.73 2.10. 1. 1. MGX-5600 1022780 0.03.44 2. 44 2.45.97. Metric Horsepower equals SAE times 1.21) 1001 (2205) 2300 (1.21 @ 1600 RPM KILOWATTS (HORSEPOWER) @ 1800 RPM @ 2100 RPM Maximum Speed (rpm) Dry Weight kg (lb) 2300 (1.42.03) 2500 (2.51–2. 2.54.93 923 (1238) 887 (1189) 1230 (1649) 1182 (1585) 1384 (1856) 1330 (1784) 2100 909 (2000) 00 Ind.18. 1. 2. MGX-61500 SC-HL** MGX-61500 SC-HR** 1023610 1023611 Ind.84.98. application information.37. all ratios. 1. 2.03.MEDIUM DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number MGX-6650 SC 1002046 MGX-6690 SC 1020674 0. 2. 2.51.47–3. 2. 2. 1. 2.42.58. 2.97 1560 (2092) 2080 (2789) 2340 (3138) 2100 2200 (4846) MG-61242 SC 7-37017 Ind.52.88.03. 00 Ind. 2. 2. 2.21 1. 3.41 1315 (1763) 1268 (1700) 1315 (1763) 1263 (1694) 1315 (1763) 1263 (1694) 1560 (2092) 1333 (1788) 1754 (2352) 1691 (2268) 1754 (2352) 1685 (2260) 1754 (2352) 1685 (2260) 2080 (2789) 1778 (2384) 1973 (2646) 1902 (2551) 1973 (2646) 1896 (2543) 1973 (2646) 1896 (2543) 2340 (3138) 2000 (2682) 2100 1050 (2310) 2100 1105 (2431) 2100 1105 (2431) 2100 1920 (4230) 1. 2. 3. 2.29. 1.25 3.06. 2. 2.21) 1001 (2205) 2100 1192 (2628) 928 (1244) 1044 (1400) 1174 (1574) 1. 3.47–3. 2.47.07. 2.45.43 1054 (1413) 1034 (1387) 1018 (1365) 1187 (1592) 1187 (1592) 1103 (1479) @ 1200 RPM 902 (1210) 818 (1097) 616 (826) 1174 (1574) 1144 (1534) 1119 (1501) 1342 (1800) 1342 (1800) 1226 (1644) @ 1600 RPM 1203 (1613) 1090 (1462) 821 (1101) 1277 (1712) 1209 (1621) 1194 (1601) 1566 (2100) 1518 (2036) 1404 (1883) @ 1800 RPM 1353 (1814) 1227 (1645) 924 (1239) 1. 1.44 2. 1. 2.96 1. 2. and torsional compatibility notices on pages 19 and 20.93 3. 0 00 Ind.93 923 (1238) 887 (1189) 1230 (1649) 1182 (1585) 1384 (1856) 1330 (1784) 2100 909 (2000) — 1. 1. MGX-6848 SC 1020675 0. 2. 60 .51. 0 00 7-37042 1024420 MG-6984 SC MG-6984 A MG-6984 RV MGX-61000 SC * SAE Housing 0. 2.93 1.03.47 2. 2.37) 2500 (2. 2.98. MG-61242 RV 7-37049 — MGX-61500 SC * 1024500 Ind. 2. Ratings shown are in SAE Horsepower (HP).18. 2.50.50.16. 2. 2.47–3. 59 Ratios Important – See rating definitions.51–2.08. ** Consult Twin Disc for availability and technical details to the horizontal offset transmissions MGX-61500 SC-HL and MGX-61500 SC-HR. 2.21 1. 1.88.92 3.93 1.07.03. MG-61242 A 7-37046 Ind.21) 1001 (2205) 2300 (1.47 2.014. 1. 2. 7-37008 7-37481 P-71034-B 7-37028 P-71093 P-71094 Ind.51. 00 Ind. 3.48.47 2.72.93.97 3.22. * Consult Twin Disc for availability of MGX-61000 SC and MGX-61500 SC. 1.88.93 3.84. Weights are approximate and include flywheel housing adapter and flexible input coupling. 00 Ind.79 2.51–2.52.37) 2500 (2.54.03. 2.37 2.79 2.39 1119 (1500) 1491 (2000) 1678 (2250) 2100 1780 (3920) 1.48.97. 44.00 2.50 1. BW MG-5010 DC PX-9400 3. 2. and torsional compatibility notices on pages 19 and 20. 1.75.53. 2.72.51 1. 2. 1. 2.43 3. 2.52 2.54. 1. 4.04 2. BW MG-5055 A IT101316101 3. BW MG-360 IT101318505 5.04. #3 — 1.50. BW MG-5011 IV PX-10290 MG-5050 SC PX-12700 MG-5050 A PX-12730 MG-5050 RV PX-8760 XA-7022-A XA-7048-A MG-506-1 61 MG-5061 SC PX-11650/-A MG-5061 A PX-11640/-A MG-5061 V PX-8735 MG-5062 V PX-11660/-A MGX-5065 SC PX-12410 MGX-5065 A PX-12370 MG-5065 SC PX-11480 MG-5065 A PX-11165 3. 4. #3 1.13.26. 2. 4.50 2. #3 1.54.00 2. 2. 2.23. 2.07. 1.50. 2. Weights are approximate and include flywheel housing adapter and flexible input coupling. 2.14.00 @ 1800 RPM 18 (24) 13 (17) 9 (12) 23 (31) 21 (28) 17 (23) 14 (19) 35 (47) 26 (35) 74 (99) 64 (86) 58 (77) 50 (67) 104 (139) 83 (111) 72 (96) 59 (79) 52 (70) 105 (141) 60 (82) 70 (94) 61 (82) 55 (74) 67 (90) 52 (70) 67 (90) 60 (80) 67 (90) 52 (70) 104 (139) 93 (125) KILOWATTS (HORSEPOWER) @ 2100 RPM 21 (28) 15 (20) 11 (15) 26 (35) 24 (32) 20 (27) 16 (22) 41 (55) 30 (40) 86 (115) 75 (100) 67 (90) 58 (78) 121 (162) 97 (130) 84 (112) 69 (93) 61 (82) 123 (165) 70 (95) 82 (110) 72 (96) 65 (87) 75 (101) 60 (80) 75 (101) 67 (90) 75 (101) 60 (80) 116 (156) 108 (145) @ 2300 RPM 23 (31) 16 (21) 12 (16) 29 (39) 26 (35) 21 (28) 17 (23) 45 (60) 33 (44) 94 (126) 82 (110) 74 (99) 64 (86) 133 (178) 106 (142) 92 (123) 75 (101) 67 (90) 135 (181) 77 (103) 93 (125) 82 (110) 74 (100) 82 (110) 67 (90) 82 (110) 75 (101) 82 (110) 67 (90) 127 (170) 121 (162) 1.90 2.47 1.43 1. application information.00 2.11.06 2. 2. 1. 1.83. 3 SPEC.CONTINUOUS DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS ® Model Drawing Number SAE Housing MG-340 IT101317501 5.43 1. 1.96 1.26. 1.97 2.44 1.13.04. BW MG-5020 SC IT1013049B01 3. 1.55 2.26. 2. 3 SPEC.50.47 104 (139) 94 (126) 94 (126) 123 (165) 115 (154) 123 (165) 115 (154) 123 (165) 115 (154) 1.08. 1.00 1.47. 2. 4.43 Ratios Important – See rating definitions. #3 1.80.26.00 2.50.00. BW MG-5005 A IT345ATD0001 3. 1. 4. 2.51 1. 4 SPEC.04 2. 4.45 2.53. 2. 5 MG-5012 SC IT1013079B01 3.47. 1. 1.04 2. 2. 1.54. 2.08.72.04.45 3. 1. Maximum Speed (rpm) Dry Weight kg (lb) 4500 9 (20) 5000 14 (31) 4500 25 (55) 4500 53 (117) 4000 75 (165) 4500 36 (79) 4000 54 (119) 4000 75 (165) 4400 49 (109) 4400 49 (109) 4400 77 (170) 3300 86 (189) 127 (170) 3300 80 (176) 116 (156) 104 (140) 104 (140) 142 (190) 133 (178) 142 (190) 133 (178) 142 (190) 133 (178) 127 (170) 110 (147) 110 (147) 155 (208) 145 (194) 155 (208) 145 (194) 155 (208) 145 (194) 3300 3000 3000 73 (160) 100 (220) 102 (224) 3300 98 (215) 3300 95 (210) 3300 95 (210) 123 (165) 142 (190) 155 (208) 3300 142 (312) 216 (290) 199 (267) 216 (290) 199 (267) 216 (290) 199 (267) 216 (290) 199 (267) 250 (335) 232 (311) 250 (335) 232 (311) 250 (335) 232 (311) 250 (335) 232 (311) 272 (365) 254 (341) 272 (365) 254 (341) 272 (365) 254 (341 272 (365) 254 (341) 3200 111 (244) 3200 111 (244) 3200 111 (244) 3200 111 (244) 62 .04 2. 2. 4.50 104 (139) 116 (156) 1.09.47. 4. 2. 3 1. 1. 2.08.12.27. 1.47. 1. 3.53.28. 1. 2. 2. 1. 2.52. 3 SPEC. 1. 1.08 2.15. 3 SPEC.83 1. 1.00 1.72.60 3. 2. Ratings shown are in SAE Horsepower (HP). 1.78 1.50. 2. 1. 3.40 2. 3 SPEC.04 2.47 1. Metric Horsepower equals SAE times 1. 2. 1. 1.00 3. #3 1. 1.08.71. 1. 2.09 2. BW MG-5011 A PX-9999 3.94 1.80.00 2.26.50.014. 2. #3 — 1.60 1. 1. 1.00. BW 1.19.54.45 2. 1.09 2.52 4. #3 1.75.43 1. 2. 2.48. 2. BW MG-5025 A IT1013170 3. 4 SPEC.26.39 1.77. BW MG-5011 SC PX-10270 3. #3 1.40 1.72. 3 SPEC.28. 1.00 2. 2. 1. 3 SPEC. 2. 1. 3 1.12. 4. 1. 1. #3 1. 77. 3 SPEC.22.06. 1.33 3.46 1.53 2. #3 1.06. 1. 3 SPEC. 1.28. 1. 2. 1. 2.06. 2. 2. 1.53.33. 2.88 Important – See rating definitions. 1.88 1. 2. 1. 2.05 2.45. 1. 1.06. 2.53. 1.72. 1. 1. 2.45.33. 1. 1. 2. 1. and torsional compatibility notices on pages 19 and 20. #3 1. 1. 2. 1. 2 MG-5095 RV PX-11600 — @ 1800 RPM KILOWATTS (HORSEPOWER) @ 2100 RPM @ 2300 RPM Maximum Speed (rpm) Dry Weight kg (lb) 186 (249) 209 (280) 224 (300) 3500 122 (268) 186 (249) 209 (280) 224 (300) 3500 122 (268) 186 (249) 209 (280) 224 (300) 3500 150 (330) 186 (249) 209 (280) 224 (300) 3500 122 (268) 186 (249) 209 (280) 224 (300) 3500 122 (268) 1.43 1.00.88 1.22.15.95 3.53.33.05 2. 2. 1.46 186 (249) 209 (280) 224 (300) 3500 150 (330) 1. 3 SPEC.77. 1. 1.72. 2.95 1. application information.88 1. 1.33.81. 1.05.77. 1.52.33 1. 2.47.77.00 2. 2. 2. 2 MG-5091 DC 1002155 1. #3 1.03.81. 2. 1. 1.71. 2 MG-5082 A PX-11040-B 1.28. 1.30. 1. 1. 1.53 2.53.53. 2 MG-5095 A PX-11495 1.27.05 2.88 1.77. 1. 2. Metric Horsepower equals SAE times 1.73.81. 3 SPEC.33.22.96.03. 2.47. 2 MG-5090 A PX-10015 1. 1.77. #3 1.49.95 1.42. 1.04 2.95 3.22. 1. 2.28. 2.48 175 (235) 170 (228) 170 (228) 128 (170) 175 (235) 134 (180) 227 (304) 205 (275) 227 (304) 205 (275) 204 (273) 194 (260) 186 (250) 148 (198) 204 (273) 157 (210) 254 (340) 231 (310) 254 (340) 231 (310) 224 (300)* 213 (285)* 205 (275)* 160 (215)* 224 (300)* 172 (230)* 265 (355) 243 (326) 265 (355) 243 (326) 3000* 259 (572) 3000* 323 (712) 3200 120 (265) 3200 123 (270) 262 (351) 292 (392) 310 (416) 3200 135 (298) 262 (351) 292 (392) 310 (416) 3200 135 (298) 262 (351) 292 (392) 310 (416) 3200 135 (298) 3200 135 (298) 3000 220 (485) Ratios 1.88 1. 3 SPEC.53.45.52.99.06.04 2. 1.30.33. 2. 1. 1. 1.22. 1.53. 2 MGX-5095 A PX-12360 1.33.81.05.53. 2.06.46 2.05.71. 2 1.82. 1. 3 SPEC. 2 MGX-5095 RV PX-12550 — MG-5095 SC PX-11535 1.88 1.53. 2.96 2.72.71.05.43 1. #3 1.04 2.00. #3 X-9816-F 1.95 1.014.53. #3 MG-5085 SC PX-9260-B/-C MG-5085 A PX-9360-B/-C MG-5082 SC PX-11250-A 1. 1.50 4. 1. 1. 2 X-9835 1.05. 1.49.04.53 2. 2. 2. 1. 1. 1.48 1.27.05 1.45. 1.99. 64 . 1. 1. 1. 1.53. 2. 2.53. 2. 1.28. 3 SPEC. 2. 4.15. 2.05.47. Weights are approximate and include flywheel housing adapter and flexible input coupling. 1. 3 SPEC.76.46 2.50 5.77.04 2. #3 1. 2 MGX-5086 SC PX-12600 1.06.06. 2. 2. 1.83. 2. 2. 2 MGX-5086 A PX-12290 1. 2. 2. Ratings shown are in SAE Horsepower (HP). 2.88 1.22. 1.48 2. 1.05 2. 2 MG-5091 SC PX-10016 1.CONTINUOUS DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number MGX-5075 SC PX-12620 MGX-5075 A PX-12610 MGX-5075 IV PX-12630 MG-5075 SC PX-10680/-A MG-5075 A PX-10700/-A MG-5075 IV PX-11530 MG-509 63 SAE Housing 1. 1.52. 1.48 1.39 3.53 2. 4. 2. 1. 1.17.77. 2.52. 262 (351) 292 (392) 310 (416) 242 (325) 205 (275) 242 (325) 205 (275) 239 (320) 280 (375) 239 (320) 280 (375) 239 (320) 276 (370) 306 (410) 261 (350) 306 (410) 261 (350) 287 (385) 3000 297 (655) 3000 216 (475) 298 (400) 335 (449) 360 (483) 3000 190 (419) 298 (400) 335 (449) 360 (483) 3000 185 (407) 298 (400) 335 (449) 360 (483) 3000 178 (392) 298 (400) 335 (449) 360 (483) 3000 190 (419) 298 (400) 335 (449) 360 (483) 3000 185 (407) 298 (400) 335 (449) 360 (483) 3000 178 (392) * A6911 driving ring has 2150 rpm maximum speed. 2 MGX-5095 SC PX-12480 1.48 1.33.04 2. 48. 4.96 2.52 1.75.50. 1.52. 3. 1. 2. 1. 4. 1.00. 1. 1.00 @ 1800 RPM 358 (480) 358 (480) 328 (440) 358 (480) 328 (440) 347 (465) 347 (465) 321 (430) 347 (465) 321 (430) 347 (465) 321 (430) 358 (480) 328 (440) 358 (480) 328 (440) 3. 2.04 2. 1. 2.75.50 1. 1.97 2. 0 MG-5145 RV PX-10880 — Ratios KILOWATTS (HORSEPOWER) @ 2100 RPM @ 2300 RPM 410 (550) 444 (595) 410 (550) 444 (595) 373 (500) 403 (540) 410 (550) 444 (595) 373 (500) 403 (540) 403 (540) 421 (565) 387 (519) 418 (561) 366 (491) 396 (531) 387 (519) 418 (561) 366 (491) 396 (531) 387 (519) 418 (561) 366 (491) 396 (531) 410 (550) 444 (595) 373 (500) 403 (540) 410 (550) 444 (595) 373 (500) 403 (540) 0. 1.02. 1.43.04 2.00 1.13. 0 MGX-5135 RV PX-12520 — MG-5135 SC PX-11590 1.50 1. 2 MGX-5114 RV PX-11850 — MGX-5114 IV PX-12510 1.28.48. 1.12. 2.26. 1. 2.50 1. 1.59. 0 MGX-5135 A PX-12380 1. 1.53. 1. 1. 1.20. 4. 1.96 2.28.50 1. 1.79.03.53. 5. 1.92. 1.20.96 2.92.10.48. 2.86 347 (465) 403 (540) 421 (565) 1.74. 1.16 6.04 2.00 2. 2.16.17.73. 1. 1.12.79. 1.50.20.75. 2 MG-5114 RV PX-9830-A — MG-5114 IV PX-11920 1. 1.74.00.75.03. MG-5114 A PX-11915 1.50 254 (340) 242 (325) 410 (550) 376 (504) 283 (380) 272 (365) 445 (597) 408 (547) 313 (420) 302 (405) 497 (666) 456 (611) 410 (550) 445 (597) 410 (550) Important – See rating definitions.75. 1.CONTINUOUS DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 65 Model Drawing Number SAE Housing MGX-5114 SC PX-12490 1 MGX-5114 SC-HD PX-12860 1 MGX-5114 DC PX-12170 1 MGX-5114 A 1024390 1.33. 1.50. 1. 1.16.03.23.48.52 1.26.03.53.48. 0 MGX-5145 A PX-12420 1. 2. 1. 1. 0 MG-5135 A PX-11380 1. 1. 1.54 3. 0 MGX-5145 RV PX-12530 — MG-5145 SC PX-10885 1.54 3. 2. Maximum Speed (rpm) Dry Weight kg (lb) 2800 at .20. 2. 1.90 1.74 2.25.48.50. 1. 3. application information. 2. 1.50 1.20.73.54 3.48.93:1 3000 for others 203 (447) 3000 270 (595) 3000 360 (793) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2800 at .50 1.50.33.54 3. 1. 2.16.59. 2.53.48.05.75.57 347 (465) 321 (430) 347 (465) 321 (430) 347 (465) 321 (430) @ 1600 RPM 387 (519) 366 (491) 387 (519) 366 (491) 387 (519) 366 (491) @ 1800 RPM 418 (561) 396 (531) 418 (561) 396 (531) 418 (561) 396 (531) @ 2100 RPM 1.43.00 2. 1. 2.03. 0 MG-5135 RV PX-11945 — 1. 1. and torsional compatibility notices on pages 19 and 20.92. 1. 1.50 254 (340) 283 (380) 313 (420) 4.80. 1. 1.04. 2.90 1. 1. 1. 1.93.014. 1.10.79.80. Ratings shown are in SAE Horsepower (HP).48.03.04. Metric Horsepower equals SAE times 1. 1. 1.02.75.86 1. 1.75.74.00 2.20.57 0.51.75.23. 2.50 1.04.50 1.52. 2.50 1.25. 1.00 2. 1. 1. 0 MG-5145 A PX-10830 1. 2. 1. 1 Ind. 1.25. 1. 1. 0 (14" only) 1. 1. 2.57 2. 4.48.04.96 2. 1. 1. 0 (14" only) MGX-5145 SC PX-12460 1.26. 4. 1. 4. 1.17. 2 MG-514C SC X-9784-C MG-514C DC X-9786-C MGX-5135 SC PX-12450 1.48. 1. 3.04 2. 1. 1. 3.05.04. 1. 4.96 2. 1. 2.97 2.93:1 3000 for others 203 (447) 3000 270 (595) 3000 368 (810) 3000 206 (455) 3000 198 (435) 3000 270 (595) 2500 524 (1155) 2500 658 (1450) 2800 284 (625) 497 (666) 2800 280 (617) 445 (597) 497 (666) 2800 258 (568) 410 (550) 376 (504) 445 (597) 408 (547) 497 (666) 456 (611) 2800 284 (625) 410 (550) 445 (597) 497 (666) 2800 280 (617) 410 (550) 445 (597) 497 (666) 2800 258 (568) 510 (684) 438 (587) 510 (684) 438 (587) 510 (684) 438 (587) 510 (684) 438 (587) 510 (684) 438 (587) 510 (684) 438 (587) 552 (740) 485 (650) 552 (740) 485 (650) 552 (740) 485 (650) 552 (740) 485 (650) 552 (740) 485 (650) 552 (740) 485 (650) 596 (799) 555 (744) 596 (799) 555 (744) 596 (799) 555 (744) 596 (799) 555 (744) 596 (799) 555 (744) 596 (799) 555 (744) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 325 (716) 2500 333 (734) 2500 295 (650) 66 .25. 1. 1.48.00 1.16. 1. 2.93.75.52 1. Weights are approximate and include flywheel housing adapter and flexible input coupling.96 2. 1.26.00 1.92. 2 MG-5114 SC PX-9785-B 1 MG-5114 SC-HD PX-11962 MG-5114 DC PX-10250-A PX-12195(FS) 1 Ind.28.00 3.79. 1.57 2.52 1. 1.28.50.04. 1.96 6. 5. 4. MG-540 (with flexible coupling) X-9882-C 0 00. 3. Weights are approximate and include flywheel housing adapter and flexible input coupling. 0 MGX-5147 RV PX-12540-A — MGX-516 DC 1023380 1. 1. application information. 2.93.53. 1.60 5. Ind. 2. MG-540 (with rubber block drive) X-9882-C 0 00.33. 1.20. 0 Ind.51. 4. 6.58.17. 1.95 6.96.00 7.04. Ratings shown are in SAE Horsepower (HP). 1. 6. 00D005604 0.48.75.96 2. 5. 2. MGX-5600DR 1022781 Ind. 5.39 882 (1183) 861 (1155) 737 (988) @ 1200 RPM 708 (949) 638 (856) 559 (750) 682 (915) 638 (856) 638 (856) 496 (665) 466 (625) 787 (1055) 776 (1041) 648 (869) 787 (1055) 774 (1038) 644 (864) 571 (766) 535 (717) 937 (1257) 848 (1137) 1230 (1649) 1200 (1609) 985 (1321) 1151 (1543) 1038 (1392) 964 (1293) 845 (1133) 982 (1317) 955 (1281) 812 (1089) @ 1600 RPM 865 (1160) 809 (1085) 721 (967) 844 (1132) 809 (1085) 809 (1085) 663 (889) 647 (868) 1049 (1407) 1034 (1387) 864 (1159) 1049 (1407) 1032 (1384) 859 (1152) 762 (1022) 715 (959) 1249 (1675) 1130 (1515) 1575 (2112) 1566 (2100) 1271 (1704) 1564 (2097) 1458 (1955) 1352 (1813) 1088 (1459) 1000 (1341) 968 (1298) 905 (1214) @ 1800 RPM 943 (1265)* 895 (1200)* 802 (1075)* 925 (1240)* 895 (1200)* 895 (1200)* 746 (1000)* 738 (990)* 1180 (1582) 1163 (1560) 972 (1303) 1180 (1582) 1161 (1557) 966 (1295) 895 (1200) 804 (1078) 1406 (1885) 1279 (1715) 1760 (2360) 1737 (2329) 1410 (1891) 1760 (2360) 1641 (2201) 1566 (2100) 1207 (1619) 2400 1754 (3864) 1. 2.03.04 5.03.26 3.02 6. 2.53. 4. 2. 5. 0 MGX-5147 A PX-12430-A 1. Ind.55.47 1. 5. 0 (14" only) MGX-5170 DC 1023382 1. 1.50.75.47 4. 1. and torsional compatibility notices on pages 19 and 20.91 4.CONTINUOUS DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Model Drawing Number SAE Housing MGX-5147 SC PX-12470-A 1.57. 1. 1. 1.20.76. 2.48.42. 00 Ind.48. 4. 6.05 6. Metric Horsepower equals SAE times 1.17.60 5.76 6.10 633 (849) 716 (960) 735 (986) 2500 1046 (2304) 3. 2.92 3.17 6. 1. 6.50 1. 4. 4.26 3. 4.03. 1.75.90 3.03.48 1.06.33.17:1) 409 (900) 4. 1.20.59.00 3. 00 Ind. 3. 1.96 540 (724) 600 (805) 678 (909) 2500 1046 (2304) 4. 6. input speed is 1650 rpm if MG-540 . * The max.50. 0 Ind.12. 1.33.44 6.00 7. 1900* 2100* 2400* 1900* 2100* 2400* 2400* 2400* 1900 2100 2400 1900 2100 2400 2400 2400 2019 (4450) 2105 (4640) 2019 (4450) 2105 (4640) 2000 2200 (4846) 2100 3132 (6890) 2100 3475 (7654) 68 .93.03.06.96 2.56 7.00 7.03.49.18 7. 4.33.96 2. 1.58.10.48. 6.01 7.04.07.91 4.46 5. 1.17. 0 Ind.33.48. 5.92 3.SAE #00 is used with 21” rubber block drive. 2.35.22 Important – See rating definitions.92 3.17 6. 5.11 7. 1.26. 3. 1.55.48 1.57.54.95 4.00 2. 4. 4.52.98.50 1. 0 Ind. 2.03.48 @ 1600 RPM 565 (758) 481 (645) 565 (758) 481 (645) 565 (758) 481 (645) 397 (532) 365 (489) 448 (601) 408 (547) 567 (760) 567 (760) 537 (720) KILOWATTS (HORSEPOWER) @ 1800 RPM @ 2100 RPM 612 (821) 660 (885) 537 (720) 615 (825) 612 (821) 660 (885) 537 (720) 615 (825) 612 (821) 660 (885) 537 (720) 615 (825) 447 (600) 465 (624) 406 (544) 425 (570) 507 (680) 541 (725) 459 (615) 478 (641) 639 (857) 745 (999) 638 (856) 730 (979) 597 (801) 684 (917) Maximum Speed (rpm) Dry Weight kg (lb) 2500 325 (716) 2500 333 (734) 2500 295 (650) 2500 717 (1580) 2500 850 (1872) 2500 1559 (3436) 540 (724) 600 (805) 678 (909) 2500 587 (1292) 540 (724) 600 (805) 678 (909) 2500 409 (900) 633 (849) 540 (724) 716 (960) 600 (805) 797 (1069) 678 (909) 2750 (2500 at 1.04 4. 6. 2. 1.00. 0 Ind. 1. 00 Ind. 5.03. 2. 4. 5.42 1.48. 2. 1.53.63.59.96.53. 1.90 3. MGX-5600 1022780 0.76. 1. 1. Ratios 1. 2.53.18 7.50 3. MG-5506 67 1. 5.03. 4. 0 MG-520-1HP XA-7255-B 0 MG-5202 SC 1016103-C MG-5203 SC 1016249-A MG-5204 SC 1016250-B MGX-5222 DC 1022822-A MGX-5225 DC 1022825-A MGX-5321 DC 1022203-B 0.014.04. 4.76. 4.42 2.48 3. 00 Ind.51.88.30.73 2.51. MGX-6599 A 7-40263 1.15.07. 0 Ind.03) 2500 (2. 2.51.37) 2500 (2.22 6.82 1.34. 00 Ind. @ 1200 RPM KILOWATTS (HORSEPOWER) @ 1600 RPM @ 1800 RPM Maximum Speed (rpm) Dry Weight kg (lb) 1548 (2076) 2064 (2768) 2322 (3114) 1800 3000 (6608) 1548 (2076) 2064 (2768) 2322 (3114) 1800 3800 (8370) 1548 (2076) 2064 (2768) 2322 (3114) 1800 4500 (9912) 1500 (2012) @ 1600 RPM 640 (858) 529 (709) 462 (620) 413 (554) 640 (858) 529 (709) 462 (620) 413 (554) 710 (952) 670 (898) 611 (819) 570 (764) 685 (919) 670 (898) 575 (771) 706 (947) 668 (896) 644 (864) 706 (947) 668 (896) 644 (864) 637 (854) 623 (835) 534 (716) 473 (634) 827 (1109) 810 (1086) 805 (1080) 780 (1046) 723 (970) 875 (1173) 767 (1029) 719 (964) 875 (1173) 767 (1029) 719 (964) 2000 (2682) @ 1800 RPM 695 (932) 574 (770) 502 (673) 448 (601) 695 (932) 574 (770) 502 (673) 448 (601) 771 (1034) 729 (978) 664 (890) 619 (830) 744 (998) 728 (976) 624 (837) 767 (1029) 728 (976) 699 (937) 767 (1029) 728 (976) 699 (937) 716 (960) 701 (940) 600 (805) 532 (713) 898 (1204) 879 (1179) 874 (1172) 847 (1136) 785 (1053) 950 (1274) 833 (1117) 780 (1046) 950 (1274) 833 (1117) 780 (1046) 2250 (3017) @ 2100 RPM 778 (1043) 642 (861) 562 (754) 501 (672) 778 (1043) 642 (861) 562 (754) 501 (672) 858 (1151) 811 (1088) 739 (991) 690 (925) 828 (1110) 806 (1081) 696 (933) 851 (1141) 804 (1078) 779 (1045) 851 (1141) 804 (1078) 779 (1045) 835 (1120) 818 (1097) 699 (937) 621 (833) 934 (1252) 934 (1252) 934 (1252) 934 (1252) 875 (1173) 1059 (1420) 928 (1244) 869 (1165) 1059 (1420) 928 (1244) 869 (1165) 1800 TBA (TBA) 2500 344 (757) 2500 325 (716) 2500 580 (1278) 2500 492 (1084) 2500 488 (1075) 2500 468 (1031) 2500 794 (1747) 2500 575 (1267) 2500 580 (1278) 2500 510 (1123) 911 (1222) 1025 (1375) 1098 (1472) 2300 (1.50. 5.24 2. 4. 6. MGN-1816 V PPD007098 Ind. 2.51. 2. MGN-1817 V PPD007099 Ind. MGX-6599 RV 7-40336 — MG-6600 DC 7-36712-A 0 Ind.47–3.47–3.62.88 1.03.56.72.29 3. 1.73 1.85 5.51. 1.014. 7. 2. 1.00 4. MGN-1819 V PLN005679 Ind.43. 0 Ind.00. 2. 4.47. 2. 2. Metric Horsepower equals SAE times 1.CONTINUOUS DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® 69 Model Drawing Number SAE Housing MGN-1814 V PPD007097 Ind.66. MGX-6848 SC 1020675 0. 4.51.37.21 1.73 2. Ratios 2.61 6.07 2.33. 1.28. MGX-6620 RV 7-40316 — MGX-6650 SC 1002046 0.19.72 1. MGX-6620 A 7-40264 0 Ind. Ratings shown are in SAE Horsepower (HP).21) 1001 (2205) 1017 (1364) 977 (1310) 943 (1265) 1111 (1490) 1074 (1440) 1129 (1514) 1069 (1434) 1028 (1379) 1250 (1676) 1194 (1601) 1195 (1602) 1130 (1515) 1098 (1472) 1420 (1904) 1350 (1810) 2300 (1. 2.55. 2.48 2.68. 1.93 4.09 2.03 3. MGX-6690 SC 1020674 0. MGX-6599 SC 7-40384 1. 00 Ind.88.43 1.03 2.03. 2.51–2.34.03. Weights are approximate and include flywheel housing adapter and flexible input coupling.32 2. 2.21) 1001 (2205) 2300 (1.11 4.04.45 2. 3.00. MG-6449 A 7-37423 1.42 2. 3.53.47 2.51–2.53.51–2.03.74.55.22.80 3.93 3.72.37) 2500 (2.73 2. 1.47.05 1.24 2.30.44 2. 3.72 5.95 2.07 2. 3. 2.97.95 1.37 2. 2.58.93. application information.47–3.03. 1. 0 Ind. and torsional compatibility notices on pages 19 and 20. 1. MGX-6620 SC 7-40337 0 Ind.21 1. 6. 1.48 2.44 2.33. 2. 1. 2.44 2. 1.80 1. 1. 2. 1. 1. 2.74 1.73 1.21) 1001 (2205) 70 .88. 2.46. MG-6449 RV 7-37431-A — MGX-6598 DC 7-40379 1. 2.59 8. 1. 0 Ind. 2. 2. 1.09 2.51.93 3.74.88 7.28.21 Important – See rating definitions. 1. 1. 52 2.96 1.52. 0 00 MG-61242 SC 7-37017 Ind. 2.014.42.93 905 (1214) 867 (1163) 1206 (1617) 1157 (1552) 1356 (1818) 1301 (1745) 1.16.92 3. Maximum Speed (rpm) Dry Weight kg (lb) 2100 1192 (2628) 2100 909 (2000) 2100 1050 (2310) 2100 1105 (2431) 72 . 1. 1.48.07 2. 2.79 2.44 2.08.93 1250 (1676) 1173 (1573) 1239 (1661) 1189 (1594) 1173 (1573) 1667 (2235) 1512 (2028) 1651 (2214) 1585 (2125) 1565 (2099) 1875 (2514) 1760 (2360) 1858 (2492) 1782 (2390) 1760 (2360) Important – See rating definitions. and torsional compatibility notices on pages 19 and 20. Ratings shown are in SAE Horsepower (HP). 2. 2. 2. application information.97. 2. 2. 2.18. Weights are approximate and include flywheel housing adapter and flexible input coupling.43 @ 1200 RPM 884 (1185) 800 (1073) 602 (807) 1.54.50.47.06. 0 00 Ind.CONTINUOUS DUTY RATINGS FOR STANDARD & QUICKSHIFT MARINE TRANSMISSIONS (Continued) ® Drawing Number 7-37008 7-37481 P-71034-B 7-37028 P-71093 P-71094 SAE Housing Ind. 2. Metric Horsepower equals SAE times 1. Model MG-6984 SC MG-6984 A 71 Ratios KILOWATTS (HORSEPOWER) @ 1600 RPM @ 1800 RPM 1178 (1580) 1326 (1778) 1066 (1430) 1200 (1609) 802 (1075) 903 (1211) 1.29. 1.25 3. MG-61242 A 7-37046 Ind. 22 (133) 4.09 (256) 5.59 (421) 18.70 (373) 0.97 (405) 15.21 (107) 4.00 (127) 5.30 (185) F1 R S (sump) in (mm) 2.00 (178) 7.00 (254) 10.50 (89) 3.39 (162) 3.84 (123) 7.00 (178) C S F A degree — — 8 — — 8 10 — — 10 15 — 10 10 — — — 7 7 15 — 7 — 7 — 7 15 — — 7 15 — 7 — 7 — 7 — — — — 7 L R Weight lb (kg) 20 (9) 31 (14) 55 (25) 117 (53) 165 (75) 79 (36) 119 (54) 165 (75) 109 (49) 104 (47) 170 (77) 189 (86) 176 (80) 160 (73) 220 (100) 227 (103) 215 (98) 210 (95) 190 (86) 312 (142) 244 (111) 244 (111) 244 (111) 244 (111) 268 (122) 268 (122) 330 (150) 268 (122) 268 (122) 268 (122) 330 (150) 298 (135) 298 (135) 265 (120) 270 (123) 298 (135) 298 (135) 572 (259) 712 (323) 485 (220) 655 (297) 475 (215) 74 .50 (165) 7.40 (213) 8.00 (178) 3.49 (241) 7.12 (282) 7.85 (149) 9.42 (265) 13.81 (71) 16.78 (325) 12.62 (194) 2.06 (78) 10.53 (318) 2.12 (181) 7.00 (254) 10.59 (218) 7.11 (358) 13.60 (193) 6.40 (213) 10.80 (249) 8.70 (373) 0.05 (128) F (length) in (mm) 7.82 (173) 9.56 (167) 4.75 (171) 6.00 (254) 10.21 (107) 3.91 (48) 14.81 (71) 14.97 (101) 5.61 (168) 7.52 (140) coax (0) coax (0) 5.12 (282) 10.00 (254) 10.50 (165) 6.75 (171) 6.15 (156) 6.59 (15) 0.17 (131) 3.09 (459) 17.50 (165) 10.00 (178) 5.00 (152) 6.00 (254) 10.13 (207) 7.96 (126) 6.16 (156) 6.66 (93) 6.00 (254) 10.DIMENSIONS AND WEIGHTS FOR TWIN DISC MARINE TRANSMISSIONS A Vertical Offset B Vertical Offset Downangle C A S F Model MG-340 MG-360 MG-5005 A MG-5012 SC MG-5020 SC MG-5025 A MG-5055 A MG-5010 DC MG-5011 SC MG-5011 A MG-5011 IV MG-5050 SC MG-5050 A MG-5050 RV MG-506-1 MG-506-1 MG-5061 SC MG-5061 A MG-5061 V MG-5062 V MGX-5065 SC MGX-5065 A MG-5065 SC MG-5065 A MGX-5075 SC MGX-5075 A MGX-5075 IV MG-5075 SC MG-5075 SC MG-5075 A MG-5075 IV MG-5082 SC MG-5082 A MG-5085 SC MG-5085 A MGX-5086 SC MGX-5086 A MG-509 MG-509 MG-5091 SC MG-5091 DC MG-5090 A 73 A C C F1 R Assembly Configuration IT40TD0002 IT60TD0002 IT345ATD0001 IT93TD0001 IT170TD0001 IT485ATD0001 IT880ATD0002 PX-9400 PX-10270 PX-9999 PX-10290 PX-12700 PX-12730 PX-8760 XA-7022-A XA-7048-A PX-11650/-A PX-11640/-A PX-8735 PX-11660/-A PX-12410 PX-12370 PX-11480 PX-11165 PX-12620 PX-12610 PX-12630 PX-11876 PX-10680/-A PX-10700/-A PX-11530 PX-11250-A PX-11040-B PX-9260-B/-C PX-9360-B/-C PX-12600 PX-12290 X-9816-F X-9835 PX-10016 1002155 PX-10015 A A B A A B B A A B D A B C A A A B C D A B A B A B D A A B D A B A B A B A A A A B Dimensions may vary with housing adapter or output flange.50 (165) 7.24 (413) 15.30 (338) 12.00 (254) 10.12 (181) 6.24 (413) 15.59 (15) 1.00 (178) 5.13 (207) 8.80 (350) 2.61 (168) 7.85 (149) 7.25 (260) 11.00 (254) 10. F1 R (mounting pad) in (mm) 2.59 (15) 1.15 (156) 6.53 (267) 12.00 (178) 7.93 (100) 7.49 (241) 6.18 (335) 12.00 (254) 10.30 (338) 12.00 (254) 6.75 (146) 5.00 (254) 10.00 (254) 10.51 (267) 9.82 (224) 10.66 (68) 3.84 (123) 5.11 (358) 13.11 (358) 14.82 (173) 9.94 (176) 11.00 (254) 10.12 (181) 7.63 (270) 10.17 (182) 9.22 (158) 9.85 (149) 5.60 (193) 6.60 (193) 6.62 (397) 17.00 (178) 7.80 (350) 2.13 (257) — — — — 10.00 (254) 10.52 (140) 5.59 (15) 2.91 (48) 14.84 (123) 4.00 (178) 3. Dry weights are approximate and vary by input and ratio.71 (69) 12.00 (254) 10.25 (260) 11.67 (373) 14.14 (258) 10.03 (255) 10.16 (156) 6.00 (254) 10.97 (329) 13.40 (213) 8.93 (100) 7.35 (110) 5.00 (254) 10.00 (254) 10.69 (373) 16.68 (93) 7.00 (152) 6.75 (171) 4.07 (434) F F1 (length) in (mm) — — — — — — — — — — 9.13 (207) 8.50 (165) 6.50 (165) 10.59 (15) 2.69 (119) 3.50 (165) 6.00 (178) 7.92 (125) 5. L C (offset) in (mm) A S S L D Integral V-Drive C Remote V-Drive 2.61 (244) — — 10.12 (54) 6.00 (254) 10.60 (193) 7.03 (331) 6.37 (111) 4.00 (254) 10.69 (170) 0.97 (405) 14.94 (354) — — — 13.75 (171) 8.66 (144) 5.00 (254) 10.69 (170) 6.79 (71) 4.25 (260) 11.10 (104) 4.28 (134) 5.75 (146) 13.84 (123) 7.85 (149) 5.12 (54) 6.25 (108) 6.12 (282) 6.68 (93) 3.38 (441) 16.10 (79) 4.00 (178) 7.46 (63) 3.00 (254) 10.65 (245) 8.00 (127) 5.12 (181) 8.40 (240) 6.00 (254) 10.90 (201) 7.50 (165) 6.95 (75) — — 6.25 (184) 6.00 (254) 10.43 (87) 4.00 (254) 10.69 (170) 0.00 (102) 13.00 (254) 10.40 (213) 8.25 (133) 4.56 (83) 3.19 (81) 4.22 (133) 4.00 (254) 10.10 (307) 3.92 (328) — — — — — — 13.12 (282) 10.53 (268) 10. Specifications are subject to change without notice.94 (354) — — — — — — — — — — — L R L (mounting pad) in (mm) — — — 6.18 (132) 4.00 (254) 10.95 (177) 5.90 (201) 4.00 (152) 6.25 (260) Use certified drawings for installation.60 (244) 5.65 (118) 10.97 (329) 14.10 (155) 6.00 (127) 5. 43 (265) 10.43 (265) 10.00 (279) 7.01 (305) 14.43 (265) 10.77 (324) 7.77 (147) 21.00 (203) 16.23 (361) F (length) in (mm) 17.09 (231) 9.00 (279) 11.01 (305) 12.01 (305) 12.43 (265) 10.DIMENSIONS AND WEIGHTS FOR TWIN DISC MARINE TRANSMISSIONS A Vertical Offset B Vertical Offset Downangle C A S F Model MGX-5095 SC MGX-5095 A MGX-5095 RV MG-5095 SC MG-5095 A MG-5095 RV MGX-5114 SC MGX-5114 SC-HD MGX-5114 DC MGX-5114 A MGX-5114 RV MGX-5114 IV MG-5114 SC MG-5114 SC-HD MG-5114 DC MG-5114 A MG-5114 RV MG-5114 IV MG-514C SC MG-514C DC MGX-5135 SC MGX-5135 A MGX-5135 RV MG-5135 SC MG-5135 A MG-5135 RV MGX-5145 SC MGX-5145 A MGX-5145 RV MG-5145 SC MG-5145 A MG-5145 RV MGX-5147 SC MGX-5147 A MGX-5147 RV MGX-516 DC MGX-5170 DC 75 A C C F1 R Assembly Configuration PX-12480 PX-12360 PX-12550 PX-11535 PX-11495 PX-11600 PX-12490 PX-12860 PX-12170 1024390 PX-11850 PX-12510 PX-9785-B PX-11962 PX-10250-A PX-11915 PX-9830-A PX-11920 X-9784-C X-9786-C PX-12450 PX-12380 PX-12520 PX-11590 PX-11380 PX-11945 PX-12460 PX-12420 PX-12530 PX-10885 PX-10830 PX-10880 PX-12470-A PX-12430-A PX-12540-A 1023380 1023382 A B C A B C A A A B C D A A A B C D A A A B C A B C A B C A B C A B C A A Dimensions may vary with housing adapter or output flange.05 (535) 20.25 (286) 8.69 (449) 19.26 (413) 9.75 (375) 14.00 (279) 11.00 (356) 15.47 (190) 7. Specifications are subject to change without notice.00 (203) 8.12 (206) 10.43 (62) 19.00 (203) 8.01 (305) 12.04 (179) 6.43 (62) 19.13 (156) 6.00 (432) 17.40 (264) 10.29 (338) 15.01 (305) 12.54 (141) 6.48 (190) 6.12 (206) 10.01 (305) 12.40 (264) 8.00 (381) Use certified drawings for installation.01 (305) 12.33 (161) 6.40 (264) 8.40 (264) 10.00 (279) 11.06 (459) — — 18.48 (190) 7.77 (248) 12.01 (305) 12.01 (305) 12.48 (190) 7. L C (offset) in (mm) A S S L D Integral V-Drive C Remote V-Drive 7.01 (305) 14.25 (133) 5.00 (483) 19.26 (489) — — — — 22.80 (479) 2.51 (496) 22.00 (279) 7.14 (156) 5.90 (277) 8.01 (305) 12.01 (305) 12.43 (265) 10.77 (147) 21. Dry weights are approximate and vary by input and ratio.47 (190) 10.33 (516) 5.25 (286) 11.01 (305) 12.26 (413) 7.13 (156) 7.00 (279) 11.69 (449) 19.75 (324) 14.30 (133) 5.14 (156) 5.00 (483) 19.40 (264) 13.87 (200) 9.55 (116) 21.50 (191) 11.01 (305) 12.24 (387) — — — — 17.09 (231) 7.01 (305) 12.00 (432) 3.77 (147) 20.55 (573) F F1 (length) in (mm) — — 15.01 (305) 12.43 (265) 10.28 (160) 7.06 (459) — — 18.26 (489) — — — — 17.01 (305) 12.40 (264) 10.01 (305) 12.90 (277) 8.00 (356) 12.43 (265) 10.00 (203) 11.28 (160) 7.75 (146) 6.09 (231) 8.00 (381) C S F A degree — 7 7 — 7 7 — — — 7 7 14 — — — 7 7 14 — — — 10 10 — 10 10 — 10 10 — 10 10 — 10 10 — — L R Weight lb (kg) 419 (190) 407 (185) 392 (178) 419 (190) 407 (185) 392 (178) 447 (203) 595 (270) 793 (360­) 455 (206) 435 (198) 595 (270) 447 (203) 595 (270) 800 (364) 455 (206) 435 (198) 595 (270) 1155 (524) 1450 (658) 625 (284) 617 (280) 568 (258) 625 (284) 617 (280) 568 (258) 716 (325) 734 (333) 650 (295) 716 (325) 734 (333) 650 (295) 716 (325) 734 (333) 650 (295) 1580 (717) 1670 (759) 76 .00 (432) 17.00 (483) 19.12 (206) 10.50 (191) 11.25 (286) 11.03 (483) 18.91 (582) — — 18.50 (191) 11.01 (305) 12.13 (156) 7.54 (141) 5.33 (161) 6.43 (265) 10.00 (279) 11.43 (189) 7.47 (190) 10.00 (356) 12.00 (279) 11.54 (141) 5.06 (535) 20.13 (156) 6.33 (516) 5.33 (161) 9.13 (156) 6.13 (80) 19.04 (179) 6.01 (305) 12.01 (305) 12.01 (305) 12.48 (190) 6.01 (305) 12.00 (203) 8.33 (516) 5.00 (483) 19.01 (305) 12.33 (161) 9.01 (305) 12.01 (305) 12.01 (305) 12.59 (523) 22.24 (387) — — 15.00 (279) 11.32 (237) 13.50 (292) 12.06 (459) — — L R L (mounting pad) in (mm) 10.00 (203) 11.48 (520) 4.15 (385) F1 R S (sump) in (mm) 6.43 (265) 11.00 (203) 16.43 (189) 7.28 (160) 6.87 (200) 9.47 (190) 7.12 (54) 2.00 (356) 15.29 (338) 7.01 (305) 12.50 (191) 14.13 (156) 12.01 (305) 12.54 (141) 6.05 (535) 20.43 (189) 7.05 (535) 20.43 (265) 10.25 (133) 5.04 (179) 6.55 (116) 21.80 (479) 2.91 (582) — — 22.09 (231) 9.48 (520) 4.00 (279) 11.43 (265) 10.00 (432) 3.28 (160) 6.03 (483) 18.77 (324) 14.50 (292) 7. F1 R (mounting pad) in (mm) 10.43 (189) 7.25 (286) 8.01 (305) 12.13 (80) 17.43 (265) 7.14 (562) 21.00 (203) 8.06 (535) 20.30 (135) 5.12 (54) 2.75 (146) 9.85 (250) 5.85 (250) 5. 31 (592) 22.50 (267) 16.00 (406) 16.75 (400) 15.17 (360) 12.60 (574) 6.44 (316) 12.70 (297) 14.29 (490) 19.26 (540) 19.47 (926) 39.73 (425) 21.39 (340) 13.52 (445) 17.75 (375) 14.39 (340) 13.52 (445) 19.96 (380) 13.01 (305) 14.34 (288) 40.39 (340) 13.20 (691) 26.32 (516) — — — 20.83 (275) 10.17 (360) 13.75 (375) 16.52 (445) 17.21 (310) 12.75 (222) 8.69 (500) 18.01 (305) 12.12 (1400) 20.40 (950) 12.39 (340) 13.32 (440) 16.06 (154) 30.26 (540) 21.87 (784) 27.43 (595) 25.46 (850) 4.48 (698) 25.39 (340) 17.13 (384) 15.52 (445) 18.63 (1032) 22.88 (276) 12.86 (784) — — — 32.08 (637) 29.23 (361) F (length) in (mm) 30. F1 R (mounting pad) in (mm) 16.69 (500) 19.83 (275) 9.32 (440) 16.13 (765) 27.70 (297) 11.29 (490) 21.93 (684) 11.29 (236) 6.70 (653) 5.45 (595) 23.81 (300) 11.25 (184) 7.00 (406) 20.69 (500) 18.67 (525) 20.39 (340) 17.72 (603) 23.69 (500) 19.26 (540) 26.20 (310) 8.15 (385) F1 R S (sump) in (mm) 16.12 (1400) 55.85 (225) 16.17 (995) 41.71 (780) 10.50 (800) 37.13 (384) 16.08 (510) 20.32 (440) 17.30 (287) 8.44 (316) 12.04 (382) 14.81 (300) 11.23 (463) 15.67 (525) 20.38 (670) 30.52 (445) 19.21 (310) 12.12 (1400) 55.04 (382) 15.DIMENSIONS AND WEIGHTS FOR TWIN DISC MARINE TRANSMISSIONS A Vertical Offset B Vertical Offset Downangle C A S F Model MG-520-1HP MG-5202 SC MG-5203 SC MG-5204 SC MGX-5222 DC MGX-5225 DC MGX-5321 DC MG-540 MG-5506 MGX-5600 MGX-5600 DR MGN-1814 V MGN-1816 V MGN-1817 V MGN-1819 V MG-6449 A MG-6449 RV MGX-6598 DC MGX-6599 SC MGX-6599 A­ MGX-6599 RV MG-6600 DC MGX-6620 SC MGX-6620 A MGX-6620 RV MGX-6650 SC MGX-6690 SC MGX-6848 SC MG-6984 SC MG-6984 A MG-6984 RV MGX-61000 SC MG-61242 SC MG-61242 A MG-61242 RV MGX-61500 SC MGX-5170 DC 77 A C C F1 R Assembly Configuration XA-7255-B 1016103-C 1016249-A 1016250-B 1022822 1022825 1022203-B X-9882-C 00D005604 1022780 1022781 DDP007097 DDP007098 DDP007099 PLN005679 7-37423 7-37431-A 7-40379 7-40384 7-40263 7-40336 7-36712-A 7-40337 7-40264 7-40316 1002046 1020674 1020675 7-37008 7-37028 7-37042 1024420 7-37017 7-37046 7-37049 1022390 1023382 A A A A A A A A A A A A A A A B C A A B C A A B C A A A A B C A A B C A A Dimensions may vary with housing adapter or output flange.39 (340) 17.69 (500) 22.35 (771) 11.83 (758) 36.80 (757) 30.39 (340) 13.39 (340) 13.32 (440) 17.49 (241) 9.25 (235) 12.25 (159) 6.75 (400) 17.29 (490) 19.50 (216) 14.00 (381) C S F A degree — — — — — — — — — — — — — — — 10 10 — — 10 10 — — 10 10 — — — — 10 10 — — 10 10 — — L R Weight lb (kg) 3436 (1560) 1275 (580) 900 (409) 900 (409) 2304 (1046) 2304 (1046) 3864 (1754) 4450 (2019) 4846 (2200) 6890 (3132) 7000 (3175) 6608 (3000) 8370 (3800) 9912 (4500) TBA (TBA) 757 (344) 782 (355) 1278 (580) 1084 (492) 1075 (488) 1031 (468) 1747(794) 1267 (575) 1278 (580) 1123 (510) 2205 (1001) 2205 (1001) 2205 (1001) 2628 (1192) 1991 (905) 2002 (910) 1780 (3920) 2310 (1050) 2431 (1105) 2475 (1125) 1920 (4230) 1670 (759) 78 .83 (580) 27.13 (765) 30.00 (406) 16.76 (375) 13.44 (418) 9.96 (380) 9.21 (310) 15.00 (406) 17.32 (440) 17.62 (600) 29.17 (360) 13.40 (950) 12.52 (445) 17.43 (595) 23.76 (375) 13.32 (440) 17.08 (993) 29.75 (375) 14.21 (310) 12.13 (765) 30.32 (440) 8.92 (125) 6.00 (381) Use certified drawings for installation.06 (129) 30.29 (490) 21. Dry weights are approximate and vary by input and ratio.56 (700) 29.11 (460) 15.63 (1286) 55.50 (800) 37.08 (205) 19.00 (406) 14.50 (267) 10.12 (1400) 55.75 (248) 15.25 (235) 7. L C (offset) in (mm) A S S L D Integral V-Drive C Remote V-Drive 16.77 (426) 13.39 (340) 14.69 (500) 19.53 (750) 31.81 (300) 11.39 (340) 13. Specifications are subject to change without notice.52 (445) 17.32 (440) 17.00 (406) 20.32 (161) 23.75 (222) 8.00 (406) 17.23 (463) 15.56 (827) — — R L (mounting pad) in (mm) 16.49 (241) 15.01 (305) 12.63 (524) — — — 23.83 (529) 6.25 (159) 14.55 (420) 8.63 (397) 14.25 (184) 11.75 (248) 9.50 (267) 10.66 (220) 11.32 (440) 17.01 (305) 14.67 (525) 27.75 (222) 15.74 (603) — — — — — 30.17 (309) 9.08 (637) 25.75 (248) 9.52 (445) 17.69 (500) 19.44 (164) 10.65 (550) 8.67 (525) 23.39 (340) 14.00 (406) 10.02 (1042) 50.50 (216) 8.82 (300) 39.55 (573) F L F1 (length) in (mm) — — — — — — — — — — — — — — — — 20.56 (700) 33.17 (360) 9.86 (784) 23.39 (340) 13.45 (342) 19.08 (510) 20.53 (750) 31. NOTES 79 NOTES Drawing S A E Drawing S A E 80 . com.com 82 . 54 B-1400 Nivelles Belgium Telephone: +32 (0) 67 887 211 Telefax: +32 (0) 67 887 333 E-mail: [email protected]@twindisc.O. Building C. 405-3.com Twin Disc (Pacific) Pty Ltd Queensland Head Office 40 Telford Street Virginia QLD 4014 Australia Telephone: +61 (7) 3265-1200 Cell: +61 (7) 3865-1371 E-mail: [email protected] Rolla SP Propellers SA Via Roncaglia 6 P. Hai Zhu Dist. Shartex Plaza 88 Zunyi Road (S) Shanghai. Kita-ku Saitama-shi.bcs@twindisc. wisconsin 53403 USA telephone: +1 (262) 638-4000 telefax: +1 (262) 638-4480 Twin Disc International SA Chaussée de Namur. Inc. Ltd.sh. 6883 Switzerland Phone: + 41 (0) 91 695 2000 Telefax: + 41 (0) 91 695 2001 E-mail: [email protected] P. Shanghai Representative Office 2108. Guangzhou China 510315 Telephone: +86 (20) 3435 0927 Telefax: +86 (20) 3439 1441 E-mail: jason.au 81 Guangzhou Representative Office Room 908. Saitama-ken.com Twin Disc.com Twin Disc SRL Via S. [email protected]@twindisc. INCORPORATED 1328 racine street racine.com Twin Disc (Far East) Ltd 10.com Twin Disc. 200336 China Telephone: +86 (21) 6427 3212 +86 (21) 6209 7626 Telefax: +86 (21) 6209 7629 E-mail: tdchina@online. Salani 1 50050 Limite Sull’Arno (FI) Italy Phone: +39 0571 979111 Telefax: +39 0571 979143 E-Mail: info. Xi Gang Road (M). Latin America Office Psj Los Centinelas 125-9C Las Casuarinas-Surco Lima 33 Peru Telephone: +1 (305) 434-7801 Telephone: +51 1 652 4433 Telefax: +51 1 652 4434 Cell: +51 1 9 9167 4400 E-mail: eberhardt. Fifth Lok Yang Road Jurong 629 761 Singapore Telephone: +65 62670800 Telefax: +65 62642080 E-mail: emily.brisbane@twindisc. 11 Yiying Street. Matteo Della Decima (BO) Italy Telephone: +39 051 6819711 Telefax: +39 051 6824234 6825814 E-mail: info.ch Twin Disc Japan Twin Disc Nico Co. Yoshinocho 1-chome. Box 109 Novazzano.cn Twin Disc SRL Via E.com. 331-0811 Japan Phone: +81 (48) 652-8069 Telefax: +81 (48) 665-6695 E-Mail: info@tdnico. Cristoforo 131 40017 S.TWIN DISC. TWINDISC. Incorporated Racine.A. united states of america • australia • belgium france • italy • singapore • switzerland Bulletin 319-A-MPG 5M–1/11 Printed in the USA BulletinWWW.S.COM 319-DD-MCT 5M–1/11 Printed in the USA . U.Twin Disc. Wisconsin.