PERMANENTMAGNET DC MOTORS Standard Products 4301 Kishwaukee Street, P.O. Box 106, Rockford, Illinois 61105-0106 (815) 226-3100 Fax (815) 226-3080 Locations: Rockford, IL Wilmington, MA Ennis, Ireland SCR and PWM Rated Low Voltage Rated Wash Down Duty Explosion Proof MAY, 1999 www.pacsci.com JT91336REV.1 99-5-5M PRINTED IN U.S.A. 6. TRANSPORTATION: Shipments are F. but not limited to acts of God. including. Rugged. the first two are the year and the second two are the week. backed by a 2 year warranty. smaller. Buyer may terminate. Any transportation damages must be claimed by the Buyer and the Buyer must submit a claim to the carrier. and shall not constitute reason for untimely payment. quality products that can be tailored to match their exact needs.. 8. quality construction. damages. or the incorporation of any additional or different terms or conditions by Buyer into a resulting order shall constitute non-acceptance of these Terms and Conditions. including signing and returning to Buyer his acknowledgement copy. lockout. 3. 7. or any part thereof. then outstanding. the full net amount of each invoice is due and payable in cash within thirty (30) days of shipment. fused commutator Long life. or may terminate any order.large wiring compartment for easy termination TERMS AND CONDITIONS Polyester impregnated armature for electrical and mechanical integrity TEFC and TENV configurations Class H insulation Rugged. Schedules beyond 30 days may be rescheduled without penalty. . with the highest level of support. Patented anti-cog magnets for smooth low speed operation. releasing Seller from any obligation or liability hereunder and a proposal for different terms and conditions which shall be termed objected to by Seller unless expressly accepted in writing by an authorized representative of Seller. are subject to change without notice. In addition to Permanent Magnet DC (PMDC) motors. nor shall Seller’s commencement of effort.Explosion Proof and Wash Down Duty NEMA or metric mounting Permanent magnet fields are more efficient. • Before returning for repair. lighter and offer wider speed range than comparable wound field motors 1. in itself. our major product lines include hybrid stepper motors and drives. Acknowledgement of the receipt of any purchase order. PRODUCT WARRANTY: All products are warranted for two years from date of manufacture as determined by the date code on the product label. Such objections. or delays in fulfilling any order caused by conditions beyond Pacific Scientific’s control.B. Does not include brush or commutator wear. or other labor troubles. Termination charges may be up to and including 100% of the price of the products.O. The date code consists of four digits. brushless servomotors and drives. ORDER SCHEDULES: For all standard products. strike. any or all of the order. If Buyer objects to any of Seller’s terms and conditions. shall not constitute acceptance by Seller of any additional or different terms or conditions.00. These differences account for a diverse base of satisfied customers who have very successfully applied these motors in thousands of different applications over the years. authorization (Return Material Authorization Number) must first be received from Customer Service (815-226-3044). worldwide manufacturer of high performance motors and drives. 9. be construed as acceptance of an order containing additional or different terms and conditions. Value and performance. High overcurrent capacity and dynamic braking without demag Conduit box (gasketed) . in the judgment of the Seller. low inertia servomotors and DC-powered generators. More than 40 standard models from 1/4 to 3 HP. war.HOW TO ORDER • WARRANTY • TERMS PERMANENT MAGNET DC MOTORS Welcome to Pacific Scientific. if any. shipping point. the financial credit of Buyer at any time does not justify continuance of production or shipment of any product(s) on the payment terms herein specified. 2. MINIMUM BILLING: Minimum Billing will be $50. PAYMENT TERMS: Subject to approval of Buyer’s credit. TERMINATION: By written notice given at any time prior to delivery. boycott. Seller may require full or partial payment prior to completion of production or shipment. government regulations. • Call your nearest Pacific Scientific PMDC Distributor to order standard products or for application assistance. If. No payment discounts are offered. They are prepared for the purpose of furnishing general information and are not quotations or offers to sell on the part of the company. Pacific Scientific is committed to providing our customers with high performance. or delays of Pacific Scientific’s subcontractors or suppliers in furnishing materials or supplies due to one or more of the foregoing clauses. shipping schedules for the next 30 day period are firm and cannot be rescheduled.. OFFER AND ACCEPTANCE: These Terms and Conditions constitute Seller’s offer to Buyer and acceptance by Buyer and any resulting sale is expressly limited to and conditioned upon Seller’s terms and conditions as set forth below. flood. Buyer will be liable for all costs incurred by Seller in performance of the order which is canceled on the actual date of receipt of the written notice of termination. for his convenience. PRICES: Published prices and discount schedules. a leader in high performance motor technology Permanent Magnet DC Motors Pacific Scientific Why have numerous industries depended on Pacific Scientific Permanent Magnet (PMDC) motors for over 30 years? Pacific Scientific is an 80-year old. HOW TO ORDER • Refer to the separate Pacific Scientific Authorized Distributor List or call Pacific Scientific Motor Products Division at (815) 226-3100 for your nearest Distributor. 4. riot. WARRANTY POLICY/RETURN AUTHORIZATION • Warranted 2 years after date of product date code on motor. Look under the nameplate and discover the Pacific Scientific differences. such objections must be expressly stated and brought to the attention of Seller in a written document which is separate from any purchase order or other printed form of Buyer. DELAYS: Pacific Scientific Co. • Contact your Pacific Scientific PMDC Distributor for complete Warranty and Limitation of Liability policy. and minor in advertent administrative errors contained in an invoice are subject to correction 5. constant force brush springs with field replaceable brushes Large sealed bearings are standard Environmentally protected models . shall not be liable for any defaults. HOW TO ORDER • WARRANTY • TERMS PERMANENT MAGNET DC MOTORS Welcome to Pacific Scientific. Value and performance. Termination charges may be up to and including 100% of the price of the products. These differences account for a diverse base of satisfied customers who have very successfully applied these motors in thousands of different applications over the years.B. No payment discounts are offered. or any part thereof. boycott. shipping point. High overcurrent capacity and dynamic braking without demag Conduit box (gasketed) . with the highest level of support. If. lockout. war. any or all of the order. low inertia servomotors and DC-powered generators. the first two are the year and the second two are the week. backed by a 2 year warranty. but not limited to acts of God. HOW TO ORDER • Refer to the separate Pacific Scientific Authorized Distributor List or call Pacific Scientific Motor Products Division at (815) 226-3100 for your nearest Distributor. Buyer will be liable for all costs incurred by Seller in performance of the order which is canceled on the actual date of receipt of the written notice of termination. 4. be construed as acceptance of an order containing additional or different terms and conditions. or other labor troubles. • Before returning for repair. More than 40 standard models from 1/4 to 3 HP. such objections must be expressly stated and brought to the attention of Seller in a written document which is separate from any purchase order or other printed form of Buyer. Seller may require full or partial payment prior to completion of production or shipment. Acknowledgement of the receipt of any purchase order. DELAYS: Pacific Scientific Co. Rugged. • Contact your Pacific Scientific PMDC Distributor for complete Warranty and Limitation of Liability policy. The date code consists of four digits. TRANSPORTATION: Shipments are F. and minor in advertent administrative errors contained in an invoice are subject to correction 5. smaller. Pacific Scientific is committed to providing our customers with high performance. ORDER SCHEDULES: For all standard products. fused commutator Long life. PAYMENT TERMS: Subject to approval of Buyer’s credit. authorization (Return Material Authorization Number) must first be received from Customer Service (815-226-3044). nor shall Seller’s commencement of effort. 8. government regulations. then outstanding. PRICES: Published prices and discount schedules. a leader in high performance motor technology Permanent Magnet DC Motors Pacific Scientific Why have numerous industries depended on Pacific Scientific Permanent Magnet (PMDC) motors for over 30 years? Pacific Scientific is an 80-year old. MINIMUM BILLING: Minimum Billing will be $50. Does not include brush or commutator wear. or may terminate any order.Explosion Proof and Wash Down Duty NEMA or metric mounting Permanent magnet fields are more efficient. quality construction. constant force brush springs with field replaceable brushes Large sealed bearings are standard Environmentally protected models . Any transportation damages must be claimed by the Buyer and the Buyer must submit a claim to the carrier. Look under the nameplate and discover the Pacific Scientific differences. flood. shipping schedules for the next 30 day period are firm and cannot be rescheduled. shall not constitute acceptance by Seller of any additional or different terms or conditions.. strike. Schedules beyond 30 days may be rescheduled without penalty. Patented anti-cog magnets for smooth low speed operation. TERMINATION: By written notice given at any time prior to delivery. the full net amount of each invoice is due and payable in cash within thirty (30) days of shipment. quality products that can be tailored to match their exact needs.. releasing Seller from any obligation or liability hereunder and a proposal for different terms and conditions which shall be termed objected to by Seller unless expressly accepted in writing by an authorized representative of Seller. • Call your nearest Pacific Scientific PMDC Distributor to order standard products or for application assistance. if any. are subject to change without notice. OFFER AND ACCEPTANCE: These Terms and Conditions constitute Seller’s offer to Buyer and acceptance by Buyer and any resulting sale is expressly limited to and conditioned upon Seller’s terms and conditions as set forth below. . for his convenience. Buyer may terminate. including signing and returning to Buyer his acknowledgement copy.O. damages. In addition to Permanent Magnet DC (PMDC) motors. including. in the judgment of the Seller. or delays of Pacific Scientific’s subcontractors or suppliers in furnishing materials or supplies due to one or more of the foregoing clauses. brushless servomotors and drives. PRODUCT WARRANTY: All products are warranted for two years from date of manufacture as determined by the date code on the product label. 3. They are prepared for the purpose of furnishing general information and are not quotations or offers to sell on the part of the company. in itself. and shall not constitute reason for untimely payment. 2.00. Such objections. or delays in fulfilling any order caused by conditions beyond Pacific Scientific’s control. riot. or the incorporation of any additional or different terms or conditions by Buyer into a resulting order shall constitute non-acceptance of these Terms and Conditions.large wiring compartment for easy termination TERMS AND CONDITIONS Polyester impregnated armature for electrical and mechanical integrity TEFC and TENV configurations Class H insulation Rugged. 9. the financial credit of Buyer at any time does not justify continuance of production or shipment of any product(s) on the payment terms herein specified. 6. shall not be liable for any defaults. 7. worldwide manufacturer of high performance motors and drives. our major product lines include hybrid stepper motors and drives. WARRANTY POLICY/RETURN AUTHORIZATION • Warranted 2 years after date of product date code on motor. lighter and offer wider speed range than comparable wound field motors 1. If Buyer objects to any of Seller’s terms and conditions. 3/4 1/4 .3/4 90 180 6 6 Low Voltage Rated • NEMA Standards 1/4 . we’ll design one that will.PERMANENT MAGNET DC MOTORS . PMDC Motors 1 . Our application engineers routinely make electrical and/or mechanical modifications to optimize motors for individual requirements.3 90 180 2-3 2-3 SCR Rated • Wash Down Duty 1/4 . Contact your nearest Pacific Scientific PMDC Distributor.SELECTION GUIDE HP Voltage (DC) Page SCR Rated • NEMA Standards 1/8 .2 90 180 4-5 4-5 SCR Rated • Explosion Proof 1/4 .1 1/2 .1 1/4 .1/2 1/4 .1 12 24 7 7 Tachometer Adapter Kits 8 How to Order • Warranty • Terms 9 Modification Capabilities— Custom Motors If the standard motors in this catalog do not meet the needs of your specific application. 0 108. All TEFC motors accept tachometer adapter kits.0 81.1750 RPM NEMA C face with removable base (except 1.13 12. 180 VOLT .6 0. and Baldor tachometers are easily mounted to the adapter.5 9.13 10.0 54.0 6.8 1.0 81.2 0.0 62.2 No.4 3.5 14.3 2. 1/8 SR3616-8290-7-56BC-CU FGS2430 1/4 SR3624-8291-7-56BC-CU FGS2431 1/3 SR3632-8292-7-56BC-CU FGS2432 1/2 SR3642-4822-7-56BC-CU FGS2434 1/2 SRF3632-5227-84-5-56BC-CU* FGS2748 3/4 SRF3650-4823-84-5-56BC-CU* FGS2749 1.7 0.0 7. Class 421101.0 27.6 2.0 6.9 40.1 6. Conforms to EN60034-1 and EN60034-5 **Stamped steel.6 3.13 10. Class 421101.5 2.0 54.1 HP. UL Recognized (UL 1004.3 5.1 8.2 29. UL Recognized (UL 1004.25 13.5 7. 1/4 1/2 1/2 3/4 1. Servo-Tek.25 13.2 7.0 34.7 3.2 8.8 5.9 12.0 74. All TEFC motors accept tachometer adapter kits.2 4. Servo-Tek.4 7.0 36. User supplied GE.75 18 27 21 23 29 64 75 87 YP00508 YP00508 YP00508 YP00508 YP00508 YP00435 YP00490 YP00501 .5 4. See facing page and page 11.3 9.8 8.5 1.8 15.2 35. File E61960) and CSA Certified (CSA Standard C22.0 26.0 40.10 10.0 7.0 36.0 78.0 1.10 11.0 54. 100.9 3.5 2.3 HP.0 27. File LR43477). 90 VOLT .0 9.0 27.2 No.9 4.8 16.0 72.5 5.0 18.8 3. welded base.2 4.0 3. User supplied GE. and Baldor tachometers are easily mounted to the adapter.7 3.1 42.25 14 18 21 27 22 30 30 YP00507 YP00507 YP00507 YP00507 YP00507 YP00507 YP00507 *CE marked.9 9.0 5.0 41.8 0.0 28.2 1 1 2 2 2 3 4 5 9.6 1.0 18.8 12.3 3.4 5.9 1.0 18.0 18.4 1 1 1 1 2 2 2 8. Class H insulation. See facing page and page 11.0 78.2 4.SCR RATED NEMA STANDARDS 1/8 .10 13.8 19.0 71. Class H insulation.7 5. Conforms to EN60034-1 and EN60034-5 1/4 .0 SR3624-1032-7-56BC-CU SR3642-4982-7-56BC-CU SRF3632-5265-84-5-56BC-CU* SRF3736-4983-84-5-56BC-CU* SRF3752-4984-84-5-56BC-CU* SRF5348-4485-84-5-45BC-CU* SRF5360-4985-84-5-82BC-CU* SRF5570-4986-84-5-82BC-CU* FGS2658 56C TENV FGS2438 56C TENV FGS2735 56C TEFC FGS2750 56C TEFC FGS2752 56C TEFC FGS2753 145TC** TEFC FGS2754 145TC/182 TEFC FGS2755 145TC/182 TEFC 1.13 9.6 8.00 16.4 2. File E61960) and CSA Certified (CSA Standard C22.5 2.5 28.5 4.0 26.0 3.6 3.8 9.4 9.0 SRF3756-4996-84-5-56BC-CU* FGS2751 56C 56C 56C 56C 56C 56C 56C TENV TENV TENV TENV TEFC TEFC TEFC 1.2 7.13 12.5 HP— welded base**).0 12.6 13.1750 RPM NEMA C face with removable base.6 7.3 5.9 4.0 4. File LR43477).6 6.3 0.9 8.6 *CE marked.50 19.25 16.2 9.0 4. not removable 2 PMDC Motors 4. 100. 500 -. EQUALLY SPACED ON A Ø 5.875 B.63 Ø 6.C.75 6.0005 4X .8750 –.12 AIR FLOW Ø 6.50 .0 Ø 4.0000 -.00 5.50 .63MAX.75 PMDC Motors 3 .41 2. 2.53 4.50 .00 AIRFLOW 6.00 6.188 X 1.0000 Ø .53 2. 2.00 .88 4.50 4X .2 3.003 3.06 .06 1.41 4.34 Ø .34 5.97 +.5 4X 3/8-16 UNC-2B .75 3.50 2.875 B.16 MAX.38 TEFC AIR FLOW 4X . Ø 6.63 MIN.50 6.003 3. 4.188 X 1.16 MAX.06 1.000 Ø 4.50 .C.875 B.63 2.6250 +.31 Ø 4.88 .41 4.75 6.003 NA 3.88 6. 2.00 AIRFLOW 2X BRUSH ACCESS COVER 2.00 4.34 3.188 x 1.88 2.2 FGZ9056 or FGZ9059 +.6250 +.5 TEFC 4.50 4X Ø .003 4.38 KEY 4X 3/8-16 UNC-2B .188 X 1.19 4.75 2X BRUSH ACCESS COVER TEFC 4X.50 4.75 5.875 CONDUIT OPENING 4.97 FGZ9055 or FGZ9058 +.63 .31 LENGTH 4. .38 TENV TERMINAL COVER Ø .000 -.12 2.0000 Ø . 11) 4X 3/8-16 UNC-2B THRU EQUALLY SPACED ON A Ø 5.00 4.12 LENGTH 4.25 HOOK (REMOVABLE) 4.88 . 4X 3/8-16 UNC-2B THRU EQUALLY SPACED ON A Ø 5.500 -.000 Ø 4.188 x 1.0005 4X. 2.38 KEY KNOCKOUT HOLES Ø.75 CONDUIT BOX 2X BRUSH ACCESS COVER +. LENGTH 5. EQUALLY SPACED ON A 5.C.19 2.SCR RATED NEMA STANDARDS Configurations Dimensions (inches) 1. Tachometer Adapter Kits (see p.003 Ø 8.50 5.50 Ø 4.88 6. 4X.875B.63 .63 4 X Ø . FGZ9055 or FGZ9058 +.16 MAX.16 MAX.875 CONDUIT OPENING 2.50 8.0005 4X.94 4.0005 .38 KEY 6.88 LENGTH .88 +.50 2X BRUSH ACCESS COVER TEFC FGZ9054 or FGZ9060 4.000 Ø 4.500 1.94 7.8750 -.62 AND Ø.09 +.75 2. 2.875 CONDUIT OPENING 2.23 +.0005 4X .38 KEY 3.50 5.16 MAX.41 7.0000 -.62 4X 3/816UNC-2B .50 LENGTH 4.000 4.88 2.88 6.C.88 2.8750 –.06 .50 8.50 .C.0000 . 6.500 –.38 KEY 2.875 B. EQUALLY SPACED ON A Ø 5.56 MIN.500 –.63 4X.75 2X BRUSH ACCESS COVER 4X Ø. Ø 6.62 4X Ø .88 Ø 5.50 3. 51 0. Bakery Industry Sanitation Standards Committee (BISSC) certified per BISSC Standard 29 (Authorization No.8 39.0 3. UL Recognized (UL 1004.30 18.0 27. Bakery Industry Sanitation Standards Committee (BISSC) certified per BISSC Standard 29 (Authorization No. 1/2 1 1.77 6.72 0.0 67.59 2.0 67.2 9.05 4.5 HP— welded base*).61 4.0 STF3648-5268-61-56BC STF5332-3748-61-56BC STF5356-3749-61-45BC STF5372-3750-61-82BC FGS2738 56C FGS2389 56C* FGS2390 145TC* FGS2342 145TC/182 TENV TENV TENV TENV 2.0 37.3 18.30 16.26.1 9. welded base.1 7. Class H insulation.0 126.38 3.0 54.0 6.61 4.0 72.WASH DOWN DUTY 1/4 .90 *Stamped steel. File E61960).1 HP.90 7. 180 VOLT .5 2.20 6. not removable 1/2 .5 Waterproof designation and IP65.30 22 26 41 41 YP00494 YP00494 YP00494 YP00464 *Stamped steel.7 22. 1/4 1/2 3/4 1 STF3624-4976-61-56BC STF3640-4977-61-56BC STF3758-5150-61-56BC STF5332-3747-61-56BC FGS2419 FGS2420 FGS2757 FGS1751 56C 56C 56C 56C* TENV TENV TENV TENV 2. Comply with NEMA MG1-1.20 13.20 12.0 & 1. 301).4 4.98 2.40 1.00 7. welded base.3 19.3 8.4 29.00 1 1 2 3 11.0 54.20 15.9 5. not removable 4 PMDC Motors 3.4 9. Comply with NEMA MG11.80 13.1750 RPM NEMA C face with removable base (except 1.0 18.0 36. Class H insulation.0 36. 301).2 HP.60 32.5 Waterproof designation and IP65.30 27 41 65 84 YP00492 YP00464 YP00464 YP00464 . UL Recognized (UL 1004.80 1 3 4 5 11.1750 RPM NEMA C face with removable base (except 1 HP— welded base*).00 11.0 70.3 9.11 0. File E61960).05 3.95 0.50 8.89 4.SCR RATED NEMA STANDARDS .0 36. 90 VOLT .26.6 7.30 8.0 8.0 93.4 22. 6.003 TENV 7.68 4X 3/8-16 UNC-2B . .0000 Ø . 7.38 KEY 1.500 –.50 4X 3/8-16 UNC-2B . .06 1.59 2X 2.19 .88 HOLE FOR POWER LEADWIRES.73 WIRING COVER 1/2-14 NPT 2X 3.5 MIN.88 .50 LENGTH 4.875 B.16 MAX.5 MIN.875 B.34 3.62 +.500 –. Ø 6.75 4X .003 3.68 .88 2.12 1.500 –.75 2X BRUSH ACCESS Ø .73 WIRING COVER 1/2-14 NPT .00 4.88 4.188 X 1.50 4X .0 TENV 3.06 1.09 +.34 3.00 4.0005 4.53 .38 KEY 6.16 MAX.08 4.500 –.0 3.6250 –. EQUALLY SPACED ON A Ø 5.19 6. Ø 6.16 MAX.C.50 8.6250 –. Ø 6.38 KEY +.50 LENGTH 5.50 3.500 –.5 .06 1.08 4.000 Ø 4.19 Ø .81 WIRING COVER +.19 2.003 2X 3.C.0005 4X .56 MAXIMUM EQUALLY SPACED ON A Ø 5. .188 x 1.88 +. EQUALLY SPACED ON A Ø 5.38 KEY .0005 4X .38 TENV +.53 .73 WIRING COVER 1/2-14 NPT +.19 .75 4X .75 4X Ø .00 2X BRUSH ACCESS 6.8750 –.C.0000 Ø .0000 Ø .63 5.000 Ø 4.19 2.188 X 1.C.09 +.68 4X 3/8-16 UNC-2B .88 HOLE FOR POWER LEADWIRES.188 X 1.50 .5 .41 3.25 Ø 4.53 .000 Ø 4.50 LENGTH 2. CUSTOMER TO SEAL TO PREVENT ENTRANCE OF LIQUID 4X .WASH DOWN DUTY Configurations Dimensions (inches) 1.875 B. 6.75 PMDC Motors 5 .38 KEY 1.50 .88 .88 2.34 3.000 Ø 4.0005 4X.16 MAX.56 MINIMUM EQUALLY SPACED ON A Ø 5.88 6. 2.16 MAX.19 .9 . .8750 –.12 1.50 2X 2.0000 Ø .34 2X BRUSH ACCESS 6.9 .31 Ø 4.003 TENV 7.31 5.68 4X 3/8-16 UNC-2B .88 4.C.56 MAXIMUM EQUALLY SPACED ON Ø A 5.875 B. Ø 6.50 LENGTH 4X 3/8-16 UNC-2B .00 3.188 X 1.50 4X .41 7.68 .875 B. Ø 6.0 4.0005 2.SCR RATED NEMA STANDARDS .6250 –.88 5.003 3. .38 TENV 2X BRUSH ACCESS 4X .88 .68 +.92 .0000 Ø .50 2X BRUSH ACCESS 5.25 WIRING COVER +. POWER TERMINALS INSIDE THIS COVER 2.88 6.50 LENGTH POWER TERMINALS INSIDE THIS COVER 2.19 2X 3.92 .000 Ø 4. CUSTOMER TO SEAL TO PREVENT ENTRANCE OF LIQUID 6. 06 4.000 –.1750 RPM 1/3 3/4 EP3624-2757-7-56BC-CU EP3648-4952-7-56BC-CU Configurations FGE0245 FGE0244 Dimensions (inches) 1.0 9.22 1 1 10.8 1 1 1 1 10.38 14. Class 428801 (File LR43478).0 .03 0.0 10.5 6.3/4 HP. Class 1 (Groups C and D). 6.0 71. CSA Listed Components per CSA Standard C22.5 TENV 6 PMDC Motors 4X3/8-16UNC-2B .38 4X.2 12.6250 –. 2.38 19 YP00386 56C 56C TENV TENV 13. File E56538).6 3.10 4. UL Listed (UL674.0 34.20 17.0 6.3/4 HP.66 . 3/4-14 NPT 1. Class H insulation.0 8.18 1 10. 90 VOLT . meet Division 1 and 2.0 23 27 30 36 YP00507 YP00507 YP00507 YP00507 FGE0261 FGE0262 FGE0263 56C 56C 56C TENV TENV TENV 1.88 4.0 38.EXPLOSION PROOF 1/4 .0 MIN.1750 RPM NEMA C face with removable base.38 KEY 45˙ POWER LEAD GROUND LEAD WHITE GREEN POWER LEAD THERMOSTAT BLACK LEADS RED 6.02 .38 14. 1/4 1/3 1/2 3/4 EP3624-1434-7-56BC-CU EP3632-1435-7-56BC-CU EP3640-1436-7-56BC-CU EP3758-5151-7-56BC-CU FGE0212 FGE0242 FGE0213 FGE0248 56C 56C 56C 56C TENV TENV TENV TENV 2.52 .0 52.02 1.0 27.7 7.1 3.0 87.0 113.4 28.24 4. 145.38 12.3/4 HP.7 11.42 LENGTH .0 4.0 18.76 1.62 MIN EQUALLY SPACED ON A 5. 12 VOLT .19 .94 4.38 23 30 34 YP00508 YP00508 YP00508 FGE0243 56C TENV 28.6 5. 180 VOLT .56 2X BRUSH ACCESS PLUG +.4 8.5 4.16 .003 .0 12. 24 VOLT .0 n/a .10 8.0 18.88 6.875 B.16 MAX.40 1 1 1 10.SCR RATED NEMA STANDARDS .0 12.3 9.00 3.34 4.10 10.C. 4. Class II (Groups F and G) and Class III.06 Ø 6.1 .74 4.50 .0 27.04 3.1750 RPM 1/4 1/2 3/4 EP3624-5269-7-56BC-CU EP3644-5214-7-56BC-CU EP3752-5215-7-56BC-CU 1/3 HP.75 HEX SOCKET 3.0 7.80 24.0 n/a n/a 1.3 2.0 27.1750 RPM 1/3 EP3620-1954-7-56BC-CU 1/3 .0 6.2 No.3 3.38 24 33 YP00357 YP00386 1/4 .63 1.0005 4X .15 2.188 X 1.07 3.10 8.0 5.500 +.50 4.5 .38 13.38 12.4 51.0 26.00 4.0000 Ø .63 3.38 11. . TACHOMETER ADAPTER KITS Use to simply monitor motor speed with a readout or through control electronics to very accurately maintain the motor's set speed throughout a wide speed range. 3/4 HP TEFC motor with Servo-Tek tachometer installed.120” dia. See their specifications for voltage gradients. 8 PMDC Motors . 1.5 HP TEFC motor with GE tachometer installed. User supplied GE. shafts (rather than . Servo-Tek. SA-7103A and SA-7360-F-1(7 V/KRPM). Order Servo-Tek Adapter Kit Model Number Notes FGZ9054 FGZ9057 FGZ9058 FGZ9059 Servo-Tek models SA-757A. Kits include parts and instructions for easy mounting.) can also be mounted using Servo-Tek coupling ST-9502-1. Models with . and Baldor tachometers are easily mounted to the adapter.187” dia. Order GE or Baldor Adapter Kit Model Number FGZ9055 FGZ9056 FGZ9060 GE model 5PY or Baldor model BTG. MA Ennis.1 99-5-5M PRINTED IN U. 1999 www.pacsci. IL Wilmington. Illinois 61105-0106 (815) 226-3100 Fax (815) 226-3080 Locations: Rockford. Ireland SCR and PWM Rated Low Voltage Rated Wash Down Duty Explosion Proof MAY.S.com JT91336REV. Box 106. .O. Rockford. P.A.PERMANENT MAGNET DC MOTORS Standard Products 4301 Kishwaukee Street.