DocumentNumber Title StatusANSI 01 Industrial Wire Cloth - ANSI/AWCI-01-1992 Withdrawn ANSI 5.2 Photography - Density Measurements - Part 2: Geometric Conditions for Transmission Density - ISO 5.2-1991;ANSI/NAPM IT2.19-1994 Withdrawn ANSI 5-3 Photography - Density Measurements - Part 3: Spectral Conditions - Revision and Redesignation of ANSI/ ISO 5-3-1984; ANSI/NAPM IT2.18-1996 Withdrawn ANSI 5-4 Photography - Density Measurements - Part 4: Geometric Conditions for Reflection Density - Revision and Redesignation of ANSI/ ISO 5/4-1983; ANSI PH2.17-1985 Withdrawn VIDEO RECORDING - 1-IN TYPE C RECORDERS AND REPRODUCERS - FREQUENCY RESPONSE AND REFERENCE LEVEL; (REVISION AND REDESIGNATION OF ANSI C98.20M- ANSI 20M Inactive 1979) (SMPTE) ANSI 23M VIDEO RECORDING - 1/2-IN TYPE F HELICAL-SCAN - RECORDS; (REVISION AND REDESIGNATION OF ANSI C98.23M-1980) (SMPTE) (WITHDRAWN) Inactive ANSI 24M VIDEO RECORDING - 1-IN REEL DIMENSIONS (SMPTE) Inactive ANSI 56 MOTION-PICTURE FILM - NOMENCLATURE FOR STUDIOS AND PROCESSING LABORATORIES (SMPTE) Inactive ANSI 59 MOTION-PICTURE FILM (35-MM) - CAMERA APERTURE IMAGES; (REVISION AND REDESIGNATION OF ANSI PH22.59-74) (SMPTE) Inactive ANSI 76 MOTION-PICTURE CAMERAS - 16- AND 8-MM THREADED LENS MOUNTS - DOCUMENT NOT AVAILABLE Inactive ANSI 101 Personnel Protection - Men's Limited-Use and Disposable Protective Coveralls - Size and Labeling Requirements - Revised to ISEA/ANSI 101-1993 Withdrawn ANSI 102 Gas Detector Tube Units - Short Term Type for Toxic Gases and Vapors in Working Environments Withdrawn MOTION-PICTURE FILM (35-MM) - FOUR 150-MIL MAGNETIC AUDIO RECORDS; (REVISION OF ANSI PH22.108-1974) (REVISION AND REDESIGNATED, AND CONSOLIDATED ANSI 108 Inactive TO ANSI/SMPTE 86-1991) MOTION-PICTURE FILM - FILM IMAGE AREA FOR REVIEW ROOM VIEWING - 35- AND 16-MM PRINTS FOR TELEVISION TRANSMISSION; (REVISION AND REDESIGNATION OF ANSI 148 Inactive ANSI PH22.148-1967) (SMPTE) ANSI 168 MOTION-PICTURE FILM (16-MM) - PERFORATED 8-MM TYPE S, (1-4); (REVISION AND REDESIGNATION OF ANSI PH22.168-1973) (SMPTE) Inactive ANSI 171 MOTION-PICTURE FILM (35-MM) - PERFORATED 16-MM, 3R (1-3-0); (REVISION AND REDESIGNATION OF ANSI PH22.171-1980) (SMPTE) Inactive ANSI 179 MOTION-PICTURE FILM (8-MM TYPE S) - PRINTED AREAS - 35-MM FILM PERFORATED 2R AND 5R; (REVISION AND REDESIGNATION OF ANSI PH22.179-1980) (SMPTE) Inactive MOTION-PICTURE FILM (8-MM TYPE S) - PRINTED AREAS - 16MM FILM PERFORATED 8-MM TYPE S (1-3); (REVISION AND REDESIGNATION OF ANSI PH22.181-1973) ANSI 181 Inactive (SMPTE) MOTION-PICTURE FILM (35-MM) - SIX 100-MIL MAGNETIC AUDIO RECORDS; (REVISION OF ANSI PH22.186-1974) (SMPTE) (REVISED, REDESIGNATED, AND CONSOLIDATED ANSI 186 Inactive TO ANSI/SMPTE 86-1991) ANSI 192 MOTION-PICTURE EQUIPMENT - SHIPPING REELS FOR 35-MM PRINTS; (REVISION AND REDESIGNATION OF ANSI PH22.192-1976) (SMPTE) Inactive ANSI 215 MOTION-PICTURE FILM (65-MM) - CAMERA APERTURE IMAGE (SMPTE) Inactive ANSI 218M MOTION-PICTURE FILM (16-MM) - 200-MIL CENTER-POSITION MAGNETIC AUDIO RECORD (SMPTE) Inactive ANSI 220 MOTION-PICTURE AND TELEVISION EQUIPMENT - CAMERA MOUNTING CONNECTIONS - 1/4-INCH- 20 THREAD AND 3/8-INCH- 16 THREAD TRIPOD SCREWS (SMPTE) Inactive ANSI 223M MOTION-PICTURE FILM - SAFETY FILM; (REVISION AND REDESIGNATION OF ANSI PH22.31M-1980) (SMPTE) Inactive ANSI 329 Information Technology - Magnetic Tape Cartridge for Information Interchange 0.50 in (12.65 mm), Serial Serpentine, 208-Track, 85 938 bpi (3383 bpmm) DLT5 Format Withdrawn ANSI 331.1 Information Technology Database Languages - SQLJ - Part 1: SQL Routines Using the Java Programming Language Withdrawn Photography - Determination of Residual Thiosulfate and Other Related Chemicals in Processed Photographic Materials - Methods Using Iodine-Amylose, Methylene ANSI 417 Withdrawn Blue and Silver Sulfide - ISO; ANSI/NAPM IT9.17-1993; Revision and Redesignation of ANSI PH4.8-1985 ANSI 513 Carbides - Application of Carbides for Machining by Chip Removal Designation of the Main Groups of Chip Removal and Groups of Application Withdrawn Audiovisual Systems - 16-mm Sound Film Projectors - Method of Measuring and Reporting Performance - Revision and Redesignation of ANSI PH7.205-1984; ANSI/NAPM ANSI 574-20 Withdrawn IT7.203-1996 ANSI 1230 Photography - Determination of Flash Guide Numbers - ISO; ANSI/NAPM IT3.405-1996 Withdrawn ANSI 1755 Audiovisual Systems - Projector Slides - Dimensions - ISO; ANSI/NAPM IT7.210-1994; Revision and Redesignation of ANSI PH3.43-1977(R1991) Withdrawn ANSI 2240 Photography - Colour Reversal Camera Films - Determination of ISO Speed - ISO; Revision and Redesignation of ANSI PH2.21-1983; ANSI/NAPM IT2.21-1994 Withdrawn ANSI 3029 Photography - 126-Size Cartridges - Dimensions of Cartridge, Film and Backing Paper - Revision and Redesignation of ANSI PH1.40-1984; (ISO) Withdrawn ANSI 4330 Imaging Materials - Photographic Film and Paper - Determination of Curl - ANSI/NAPM IT9.10-1996 Withdrawn ANSI 5593 Rolling Bearings - Vocabulary Withdrawn ANSI 5609 Boring Bars for Indexable Inserts - Dimensions - ISO Withdrawn ANSI 5769 Photography - Processed Films - Method for Determining Lubrication - ISO; Revision and Redesignation of ANSI IT9.4-1988; ANSI/NAPM IT9.4-1992 Withdrawn ANSI 6462 Face Milling Cutters with Indexable Inserts - Dimensions - ISO Withdrawn DocumentNumber Title Status ANSI 6986 Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions Withdrawn ANSI 7187 Photography - Materials for Direct-Positive Colour Print Cameras - Determination of ISO Speed - ISO Withdrawn ANSI 7406 Bore Type Milling Cutters for Indexable Inserts - Designation - ISO 7406-1986 Withdrawn ANSI 7811/1 INFORMATION SYSTEMS - IDENTIFICATION CARDS - RECORDING TECHNIQUE (PART 1: EMBOSSING) Inactive ANSI 7811/2 INFORMATION SYSTEMS - IDENTIFICATION CARDS - RECORDING TECHNIQUE (PART 2: MAGNETIC STRIPE) Inactive ANSI 7811/3 INFORMATION SYSTEMS - IDENTIFICATION CARDS - RECORDING TECHNIQUE (PART 3: LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS) Inactive ANSI 7811-4 Identification Cards - Recording Technique - Part 4: Location of Read-Only Magnetic Tracks - Tracks 1 and 2 - ISO/IEC Withdrawn ANSI 7811/4 INFORMATION SYSTEMS - IDENTIFICATION CARDS - RECORDING TECHNIQUE (PART 4: LOCATION OF READ-ONLY MAGNETIC TRACKS - TRACKS 1 AND 2) Inactive ANSI 7811-5 Identification Cards - Recording Technique - Part 5: Location of Read-Write Magnetic Tracks - Track 3 - ISO/IEC Withdrawn ANSI 7811/5 INFORMATION SYSTEMS - IDENTIFICATION CARDS - RECORDING TECHNIQUE (PART 5: LOCATION OF READ-WRITE MAGNETIC TRACK - TRACK 3) Inactive ANSI 7812 INFORMATION SYSTEMS - IDENTIFICATION CARDS - NUMBERING SYSTEM AND REGISTRATION PROCEDURE FOR ISSUER IDENTIFIERS Inactive ANSI 7848 Shank Type Milling Cutters with Indexable Inserts - Designation - ISO 7848-1986 Withdrawn ANSI 7943-1 Audiovisual Systems - Overhead Projectors Projection Stages - Dimensions - ANSI/NAPM IT7.220-1995 Withdrawn Audiovisual Systems - Overhead Projectors Transparencies and Transparency Frames (Dimensions) - Reaffirmation and Redesignation of ANSI/ISO 7943.2-1987; Refer to ANSI 7943.2 Withdrawn ANSI IT7.212-1989 Audiovisual Systems - Overhead Projectors - Film Rolls, Cores and Winders (Dimensions) - Reaffirmation and Redesignation of ANSI/ISO 7943.3-1987; Refer to ANSI ANSI 7943.3 Withdrawn IT7.217-1989 Information Processing Systems - Open Systems Interconnection - Transport Service Definition - ISO; Revision and Redesignation of ANSI X3.140-1986; Technical ANSI 8072 Withdrawn Corrigendum 1 - 1991; Addendum 1 - 1986 ANSI 8073 Information Processing Systems - Open Systems Interconnection - Oriented Transport - ISO; Revision and Redesignation of ANSI X3.140-1986 Withdrawn ANSI 8211 Information Systems - Specification for a Data Descriptive File for Information Interchange Withdrawn ANSI 8225 Imaging Materials - Ammonia-Processed Diazo Photograghic Film - Specifications for Stability - Revision and Redesignation of ANSI IT9.5-1992; ANSI/NAPM IT9.5-1996 Active ANSI 8326 Information Processing Systems - Open Systems Interconnection - Basic Connection Oriented Session Service Definition Withdrawn Information Processing Systems - Open Systems Interconnection - Basic Connection Oriented Session Protocol Specification - Revision and Redesignation of ANSI X3.153- ANSI 8327 Withdrawn 1987;(ISO 8327-1987) ANSI 8632-2 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 2: Character Encoding - ISO/IEC Withdrawn ANSI 8632-2 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 2: Character Encoding - ISO/IEC Inactive Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 2: Character Encoding Amendment 1: Rules ANSI 8632-2 AM 1 Withdrawn for Profiles - NCITS; Amendment 1 to ANSI/ISO/IEC 8632-2-1992 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of Picture Description Information - Part 2: Character Encoding Amendment 2: ANSI 8632-2 AM 2 Withdrawn Application Structuring Extensions - NCITS; Amendment 2 to ANSI/ISO/IEC 8632-2-1992 ANSI 8776 Imaging Materials - Photographic Film - Determination of Folding Endurance - ISO; ANSI/NAPM IT9.8-1989 Withdrawn Information Technology - Intelligent Peripheral Interface - Part 2: Device Specific Command Set for Magnetic Disk Drives - ISO; Revision and Redesignation of ANSI X3.130- ANSI 9318-2 Withdrawn 1986 Information Technology - Intelligent Peripheral Interface - Part 3: Device Generic Command Set for Magnetic and Optical Disk Drives - (ISO); Revision and Redesignation ANSI 9318-3 Withdrawn of X3.132-1987 Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives - (ISO); (Revision and Redesignation of X3.147- ANSI 9318-4 Withdrawn 1988 ANSI ISO/IEC 9594-8 Information technology Open Systems Interconnection The Directory: Public-key and attribute certificate frameworks - INCITS Adoption Active Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 1: Overview, Profiles, ANSI 9636-1 Withdrawn and Conformance - ISO; Redesignation of ANSI X3.161 Never Published Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 2: Control - ISO; ANSI 9636-2 Withdrawn Redesignation of ANSI X3.161 Never Published Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 3: Output - ISO; ANSI 9636-3 Withdrawn Redesignation of ANSI X3.161 Never Published Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 4: Segments - ISO; ANSI 9636-4 Withdrawn Redesignation of ANSI X3.161 Never Published Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 5: Input and Echoing - ANSI 9636-5 Withdrawn ISO; Redesignation of ANSI X3.161 Never Published Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 6: Raster - ISO; ANSI 9636-6 Withdrawn Redesignation of ANSI X3.161 Never Published ANSI 9718 Imaging Materials - Processed Vesicular Photographic Film - Specifications for Stability - ISO; Refer to ANSI/NAPM IT9.12-1995 Withdrawn ANSI 10157 Photography - Flash Exposure Meter - Requirements - ISO: ANSI/NAPM IT3.303-1994 Withdrawn 38 Basic Elements of an Employer Program to Provide a Safe and Healthful Work Environment . Railings.Now Copyrighted by NSC Active ANSI A10. and Specifications .Copyrighted by ALI/LADDER Active ANSI A15.SAFETY REQUIREMENTS Inactive ANSI A10.1989/ Revised to NSC A10.Measurement of Relative Position of Target Features in Two-Dimensional Space Withdrawn ANSI A15. and Marble Work .Cameras .Performance Test .9A . and Caissons .1-1996 Withdrawn ANSI 10967-1 Information Technology . ANSI/NAPM IT1.DocumentNumber Title Status ANSI 10602 Imaging Materials .Scaffolding .Now Copyrighted by ANSI A10.Safety Requirements .Revised and Redesignated to ANS/NSC A10.Portable Metal . Storage.7 AMERICAN NATIONAL STANDARD FOR MOBILE LADDER STANDS AND MOBILE LADDER STAND PLATFORMS .11 SAFETY NETS USED DURING CONSTRUCTION. This is Now Copyrighted by ALI Active ANSI A14.Now Copyrighted by ASSE/SAF Active ANSI A10.Supplement to ANSI A10.5 ANS for Ladders .4 Safety Requirements for Personnel Hoists and Employee Elevators for Construction and Demolition Operations . Terrazzo.1 Ladders .Copyrighted by ALI/LADDER Withdrawn ANSI A14. AND MARBLE WORK.8 Construction and Demolition Operations .Safety Requirements .14 Withdrawn NSC ANSI A10.20 Construction and Demolition .WORK PLATFORMS SUSPENDED FROM CRANES OR DERRICKS .OCTOBER 1975 (REVISED. CORRECTION .08/2 Automated Vision Components .Dredging . TERRAZZO.3 FIXED LADDERS . Flat Roofs.Concrete and Masonry Work .Personnel and Debris Nets Active ANSI A10.This is Now copyrighted by NSC Inactive ANSI A10. Harnesses.Processed Silver-Gelatin Type Black-and-White Film .Digger Derricks . Film and Backing Paper .17 SAFE OPERATING PRACTICE FOR ASPHALT PAVEMENT CONSTRUCTION (WITHDRAWN) Inactive Construction and Demolition Operations .4 Safety Requirements for Personnel Hoists Inactive ANSI A10.16 Construction and Demolition .ISO/IEC Withdrawn ANSI 11314 Audiovisual Systems .Portable Wood . CORRECTION .Standard AIA Connector Specifications Withdrawn ANSI A15.18 Active Copyrighted by NSC ANSI A10.Now Copyrighted by ALI/Ladder Withdrawn ANSI A14.11 Construction and Demolition Operations .5 SAFETY REQUIREMENTS FOR MATERIAL HOISTS (WITHDRAWN) Inactive ANSI A10.7 Transportation.28 CONSTRUCTION AND DEMOLITION OPERATIONS .6 DEMOLITION OPERATIONS .Safety Requirements .Now Copyrighted by NSC Active ANSI A10. ANSI/NAPM IT9.Now Copyrighted by ALI/Ladder Active ANSI A14. Stairs.10 SAFETY REQUIREMENTS FOR TEMPORARY AND PORTABLE SPACE HEATING DEVICES AND EQUIPMENT USED IN THE CONSTRUCTION INDUSTRY Inactive ANSI A10. REDESIGNATED AND CONSOLIDATED ANSI A12. ANSI/NAPM IT7.Requirements for Safety Belts.Temporary Floor and Wall Openings.1 Active ANSI A14.Safety Requirements .This is now Copyrighted by ALI A14. RAILINGS.22 Rope-Guided and Nonguided Worker's Hoists .Language-Independent Procedure Calling (LIPC) .Ceramic Tile.11 Construction and Demolition Operations .Safety Requirements .Language Independent Arithmetic .SAFETY REQUIREMENTS Inactive ANSI A10.SAFETY REQUIREMENTS Withdrawn ANSI A10.31 Construction and Demolition .This is Now ANSI A10.20-1996 Withdrawn ANSI 13886 Information Technology .Tunnels.Dimensions .Safety Requirements Withdrawn ANSI A10.Personnel and Debris Nets Inactive ANSI A10.Safety Requirements.Portable Reinforced Plastic .ISO.1 Withdrawn INTO ASSE A1264-89) ANSI A14.05/1 Automated Vision Systems .Errata 2001.9 Construction and Demolition Operations .3 CONSTRUCTION AND DEMOLITION .Safety Requirements .SAFETY REQUIREMENTS .ISO/IEC Withdrawn ANSI A10.Safety Requirements .Part 1: Integer and Floating Point Arithmetic .ISO.AIA Monochrome Digital Interface Specifications Withdrawn .Now Copyrighted by NSC.Cameras . REPAIR.SAFETY REQUIREMENTS .POWDER-ACTUATED FASTENING SYSTEMS .JANUARY 1978 Inactive ANSI A10. Shafts. and Lifelines for Construction and Demolition Use .4 ANS REQUIREMENTS FOR JOB MADE WOODEN LADDERS .Now Copyrighted by NSC Active ANSI A10.Safety Requirements .2 Ladders . Definitions.31-1995 Inactive ANSI A10. AND TOEBOARDS. Handling and Use of Commercial Explosives and Blasting Agents .08/3 Automated Vision Components . Lanyards.20 SAFETY REQUIREMENTS FOR CERAMIC TILE.Projectors .Specifications for Stability .9: 1997 Withdrawn ANSI A10. and Toeboards .This is Now Copyrighted by NSC Inactive ANSI A10.ISO.Safety Requirements .Image Size/Projection Distance Calculations . Withdrawn SAFETY REQUIREMENTS FOR FLOOR AND WALL OPENINGS.206-1996 Withdrawn ANSI 13450 Photography . AND DEMOLITION OPERATIONS Inactive Construction and Demolition Operations .110-Size Cartridge.15 Construction and Demolition . (REVISED AND REDESIGNATED TO ANSI/CABO A117.Physical Endurance for Steel Doors and Hardware Reinforcings . Care.1 MANUALLY PROPELLED MOBILE LADDER STANDS AND SCAFFOLDS (TOWERS) (WITHDRAWN) Inactive ANSI A92. and Accessory Applications .PROVIDING ACCESSIBILITY AND USABILITY FOR PHYSICALLY HANDICAPPED PEOPLE.1 Concrete Construction . (REVISED. Unified Abrasives Manufacturers' Associations Active ANSI B11.1 Safety Requirements for the Use.2 BUILDING CODE REQUIREMENTS FOR REINFORCED MASONRY.Surface Temper Etch Active ANSI B7.1 AMERICAN STANDARD BUILDING CODE REQUIREMENTS FOR MASONRY.Standard Practices (Fertilization) .1 Machine Tools .Now Copyrighted by SIA Withdrawn ANSI A92.1 REQUIREMENTS FOR FIXED INDUSTRIAL STAIRS.This is now Copyrighted ANSI A300 PART 3 Active by TCIA ANSI A300 PART 4 Lighting Protection Systems . Shrub and Other Woody Plant Maintenance . and Use Withdrawn ANSI B11. Care.Power Press Brakes .1 Rolling Element Bearings .Revision and Redesignation of ANSI A151. Engine Gearbox.Tree.Forms for One-Way Concrete Joist Construction Withdrawn ANSI A48. Shrub and Other Woody Plant Maintenance .DocumentNumber Title Status ANSI A21.4 Test Procedure and Acceptance Criteria for . FOR GAS (WITHDRAWN) Inactive ANSI A38. THROUGH 24 IN. Shrub and Other Woody Plant Maintenance .3 Machine Tools .Standard Practices (Support Sytems a.Hydraulic Presses . and Accessory Applications . Care and Protection of Abrasive Wheels .1988) (WITHDRAWN) Inactive ANSI A64.Surface Visual Inspection Active ANSI B3.2 Vehicle-Mounted Elevating and Rotating Aerial Devices . Bracing. Engine Gearbox.Forms for Two-Way Concrete Joist Construction Withdrawn ANSI A58.6 SELF-PROPELLED ELEVATING WORK PLATFORMS. and Use . and Guying) . (REVISED AND REDESIGNATED AS SIA A92.Now Copyrighted by NAA Withdrawn ANSI A300 PART 1 Tree Care Operations .2 Nonmenclature for Insulated Steel Door Systems . Inactive ANSI A92.Copyright is now SDI Active ANSI A300 Tree Care Operations .14 DUCTILE IRON FITTINGS 3 IN.2 Nonmenclature for Insulated Steel Door Systems Inactive ANSI A250. (R 1970) (NBS HANDBOOK 74) (WITHDRAWN) Inactive ANSI A48. (REVISED AND REDESIGNATED AS ASCE 7 .7 SAFETY REQUIREMENTS FOR AIRLINE GROUND SUPPORT VEHICLE-MOUNTED VERTICAL LIFT DEVICES.Now Copyrighted by AMT Withdrawn ANSI B11. Cabling.This is now Copyrighted by TCIA Active ANSI A300 PART 2 Tree Care Operations . Stairs. (R 1970) (NBS 211) (WITHDRAWN) Inactive ANSI A41.Copyright is now SDI Active ANSI A250.Copyright Held By UAMA. Care.3 Rolling Element Bearings .Safety Requirements for Construction.5 BOOM-SUPPORTED ELEVATING WORK PLATFORMS.2 Concrete Construction .6-90) Inactive ANSI A92.1992) 1992) Inactive ANSI A92.1-1987 Inactive ANSI A250.This is now Copyrighted by TCIA Active ANSI A1264. Shrub and Other Woody Plant Maintenance .7-90) Inactive ANSI A108/A118/A136.1 Installation of Ceramic Tile .Mechanical Power Presses . and Accessory Applications .1 Safety Requirements for Workplace Floor and Wall Openings.2 Machine Tools .Tree.Now Copyrighted by TCA Withdrawn BUILDINGS AND FACILITIES .Aircraft Engine.Aircraft Engine.1 MAT-FORMED WOOD PARTICLEBOARD (R 1986) Inactive ANSI A250.Standard Practices . (REVISED AND REDESIGNATED AS SIA A92..2 Rolling Element Bearings .Now Copyrighted by TCIA Active Tree Care Operations . and Railing Systems . REDESIGNATED AND CONSOLIDATED INTO ASSA A1264-89) Inactive ANSI A92.Safety Requirements for Construction. Engine Gearbox.1- ANSI A117.3 MANUALLY PROPELLED ELEVATING WORK PLATFORMS.Now Copyrighted by ASSE/SAF Withdrawn ANSI ACMA/ICPA UEF-1 Estimating Emission Factors from Open Molding Composite Processes Active ANSI AGRSS 001 Automotive Glass – Automotive Glass Replacement Safety Standard Withdrawn ANSI AGRSS 002 Automotive Glass – Automotive Glass Replacement Safety Standard Active ANSI B3.Aircraft Engine.Safety Requirements for Construction.1 Concrete Construction .Tree. and Use Withdrawn .Eddy Current Inspection Active ANSI B3.1 Inactive 1992) ANSI A120.4 Test Procedure and Acceptance Criteria for .5. (SEE SIA/ANSI A92.1 SAFETY REQUIREMENTS FOR POWERED PLATFORMS FOR EXTERIOR BUILDING MAINTENANCE (WITHDRAWN) Inactive ANSI A208.Steel Spirals for Round Reinforced Concrete Columns Withdrawn ANSI A41.Physical Endurance for Steel Doors and Hardware Reinforcings .Tree.Standard Practices .1 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES. Now Copyrighted by AMT Active ANSI B11.Safety Requirements for Construction.Walk-Behind Powered Rotary Tillers and Hand Supported Cultivators .Let-off Equipment for Rubber Hose . or Plate from Coiled Configuration .Safety Requirements for Construction.DocumentNumber Title Status ANSI B11.Safeguarding When Referenced by the Other B11 Machine Tool Safety Standards . Errata .ROLL-BUILDING MACHINES USING FULL-FACE PRESSURE ROLLS . Care. and Use . and Use . and Use Withdrawn ANSI B28.Safety Specifications Active ANSI B71. CARE.2 Specifications for Shapes and Sizes of Grinding Wheels. AND USE Inactive ANSI B11.Revised to ANSI/GWI B74.Operator-Ear Sound Pressure Level . Care. and ANSI B11. and Use Withdrawn ANSI B11. and Use Withdrawn ANSI B28. Tube. Care. Care. Care. Operation.7 Rubber Machinery .2 SAFETY REQUIREMENTS FOR THE CONSTRUCTION.6 Rubber Machinery .10 Rubber Machinery .Single.Drilling.Safety Specifications Active ANSI B71.Takeoff Equipment for Rubber Hose .16 Machine Tools . CARE. and Use . and Use Withdrawn ANSI B28.6 Safety Requirements for Manual Turning Machines with or without Automatic Control . Garden.SHEARS . AND USE OF TIRE-BUILDING MACHINES (WITHDRAWN) Inactive ANSI B28.1 SAFETY SPECIFICATIONS FOR MILLS AND CALENDERS IN THE RUBBER AND PLASTICS INDUSTRIES (R 1972) (WITHDRAWN) Inactive ANSI B28.Manufacturing Systems /Cells . Sheet. and Snow Removal Equipment . Installation. and Use Withdrawn ANSI B11.Safety Requirements for Construction.1 SAFETY SPECIFICATIONS FOR CONTROLS AND SIGNALING DEVICES FOR PRINTING PRESSES (WITHDRAWN) Inactive ANSI B71. Care. and Maintenance Withdrawn ANSI B65.8 Rubber Machinery .Metal Sawing Machines .4 Procedure for Bulk Density of Abrasive Grains.Machinery and Machine Systems for Processing Strip.1 SAFETY SPECIFICATIONS FOR MILLS AND CALENDERS IN THE RUBBER AND PLASTICS INDUSTRIES .11 Machine Tools .This is Now Copyrighted by AMT Withdrawn ANSI B11.Now Copyrighted by UAMA Active .Safety Requirements for Construction.Safety Requirements for Construction. Care. Care.9 Rubber Machinery .Safety Requirements for Construction.5 Powered Lawn. and Use Withdrawn Machine Tools .Now Copyrighted by AMT Active ANSI B11.Reinforcing Machinery for Rubber Hose .Now Copyrighted by UAMA Active ANSI B74.3 Snow Throwers .8 Outdoor Power Equipment .Chippers.SAFETY REQUIREMENTS FOR CONSTRUCTION. and Use Withdrawn ANSI B24.This is Now Copyrighted by RMA Active ANSI B28. AND USE OF TIRE CURING PRESSES AND POSTCURE INFLATORS (WITHDRAWN) Inactive ANSI B28. and Use Withdrawn ANSI B28.15 Machine Tools .8 Machine Tools . and Use of Grinding Machines Withdrawn ANSI B11. Milling.and Multiple-Spindle Automatic Bar and Chucking Machines . CARE.Gear.Measurement and Rating Procedure Withdrawn ANSI B71.3 SAFETY REQUIREMENTS FOR THE CONSTRUCTION. and Use Withdrawn ANSI B11.Safety Requirements Withdrawn ANSI B28.Safety Specifications Active ANSI B71.Safety Requirements for Construction.5 Test for Capillarity of Abrasive Grains . AND USE (WITHDRAWN) Inactive ANSI B28.Safety Requirements for Construction.Pipe.Safety Requirements for Construction.10 Small Off-Road Ground-Supported Outdoor Power Equipment – Gasoline Fuel Systems – Performance Specifications and Test Procedures Active ANSI B74. CARE.5 Machine Tools .and Walk-Behind Chipper/Vacuums .1 Consumer Turf Care Equipment Walk-Behind Mowers and Ride-On Machines with Mowers Safety Specifications Active ANSI B71. Care.4 MACHINE TOOLS . Care.Ironworkers .Endless Belt Building Machines .SAFETY REQUIREMENTS FOR CONSTRUCTION.Now Copyrighted by MPIF Active ANSI B11.Safety Specifications Active ANSI B71. Construction.13 Machine Tools .Safety Specifications Withdrawn ANSI B71.3 Specifications for Shapes and Sizes of Diamond or CBN Abrasive Products . Care. Care.Performance Criteria for the Design.Safety Requirements for Construction. and Shape Bending Machines .20 Machine Tools .5 RUBBER MACHINERY .1 Forging Machinery .Safety Requirements for Construction.Safety Requirements for Construction.Windup Equipment for Rubber Hose . Sizes and Identification of Mounted Wheels . and Use Withdrawn ANSI B11. Care.4 Commercial Turf Care Equipment .18 Machine Tools .4-1992 Inactive ANSI B74.Safety Requirements for Construction. and for Shapes.Metal Powder Compacting Presses .Hydraulic Molding and Curing Presses . Care. Care.Shredder/Baggers.10 Machine Tools .19 Withdrawn Operation ANSI B11.Safety Requirements for Construction. and Use Withdrawn ANSI B28.4 Rubber Machinery .7 Powered Log Splitters .6 Powered Shredder/Grinders. and Boring Machines . Care.9 Safety Requirements for the Construction.Safety Requirements for Construction.Cutting Machines .Now Copyrighted by UAMA Active ANSI B74. Construction.1 Passenger Ropeways . or Buff Plastic Foams-Safety Requirements for the Manufacture.21 Fatigue Proof Test Procedure for Vitrified Grinding Wheels .11 Specifications for Tumbling Chip Abrasives .15-1992) ANSI B74.1 Automotive Lifts .Vertical Clamp Injection Molding Machines (VCIMM) .19-90) Inactive ANSI B74.3 Plastics Machinery .2 for Funiculars .10 Grading of Abrasive Microgrits .Construction. and Use Active ANSI B151.Now Copyrighted by UAMA Active ANSI B74. Pelletizers.Safety Requirements Active ANSI B77.Now Copyrighted by UAMA Active ANSI B74. Care. Care & Use Active ANSI B151.Grinding Wheels.20 Specifications for Grading of Diamond Powder in Sub-Sieve Sizes . and Use Active ANSI B152.1 Automotive Lifts .Safety Requirements Active ANSI B96.14 METHODS OF CHEMICAL ANALYSIS OF ALUMINUM OXIDE ABRASIVE GRAIN AND ABRASIVE CRUDE.Aerial Tramways. and Use Withdrawn ANSI B151.Revision of ANSI/SPI ANSI B151.11-1993 Inactive ANSI B74. Aerial Lifts.1 Packaging Machinery and Packaging-Related Converting Machinery . Care. Care. Care.Safety Requirements for Manufacture. Care. Care. Care.18 Grading of Certain Abrasive Grain on Coated Abrasive Products . Care and Use Active ANSI B151.Granulators.Screen Changers . and Use Withdrawn ANSI B151.16 Checking the Size of Diamond Abrasive Grain .8 Ball Mill Test for Friability of Abrasive Grain .15A . and Use . Polishing and General Industrial Uses . Surface Lifts. and Dicers Used for Size Reduction of Plastics .DocumentNumber Title Status ANSI B74. and Use .26 Plastics Machinery .15 Plastics Machinery . Care. Safety Requirements for Withdrawn ANSI B153.Safety Requirements for the Construction.15 Inactive B74. SUPPLEMENT B74.1 Horizontal Injection Molding Machines – Safety Requirements for Manufacture.19 TEST FOR DETERMINING MAGNETIC CONTENT OF ABRASIVE GRAINS.1 WELDED ALUMINUM-ALLOY STORAGE TANKS Inactive ANSI B151.Machines to Cut.27 Active B151.11 Plastics Machinery .Now Copyrighted by UAMA Active ANSI B77.Now Copyrighted by UAMA Active ANSI B74. Care.Safety Requirements for Construction.Manufacture. and Use Active ANSI B151.Now Copyrighted by UAMA Active ANSI B74. Care. Slit.2 Construction.Injection Blow Molding Machines . Care. and Use .Rivet Setting Equipment .Copyright is now ALI Withdrawn ANSI B154.2 Plastic Film Casting Machinery .Now Copyrighted by UAMA Active ANSI B74.13 Markings for Identifying Grinding Wheels and Other Bonded Abrasives .Safety Requirements for Construction. and Use Withdrawn Plastics Machinery Robots Used with Horizontal and Vertical Injection Molding Machines Safety Requirements for the Integration.Manufacture. and Use Inactive ANSI B153. Care & Use Active ANSI B151. Care.Slit Tape and Monofilament Postextrusion Equipment .12 Specifications for the Size of Abrasive Grain . Care.6 Procedure for Sampling of Abrasive Grains . and Use of Permanent-Mold Casting Machines (Other Than Gray Iron).This is Now Copyrighted by PPMI Active .7 Plastics Machinery .1 Fasteners .Manufacture.22 Design Test for Type 27 Portable Grinding Wheels .17 Test for Bulk Density of Diamond Abrasive Grains Withdrawn ANSI B74.SPI Active ANSI B151.29 Plastics Machinery .5 Plastic Film and Sheet Winding Machinery .Safety Requirements for Manufacture. and Use Withdrawn ANSI B151.Requirements for the Manufacture.Safety Requirements for Manufacture.Dynamic Reaction Injection Molding Machines .6 Plastics Machinery .27-1994 ANSI B151.Manufacture.Now Copyrighted by UAMA Active ANSI B74. (REVISED AND REDESIGNATED TO GWI B74.Construction. (REVISED AND REDESIGNATED AS GWI B74.Revised to ANSI/GWI B74.Now Copyrighted by UAMA Active ANSI B74. and Use . and Use Withdrawn ANSI B151.Now Copyrighted by CFPMI Active ANSI B155. and Use .1987 (REVISED AND REDESIGNATED TO GWI ANSI B74.Safety Requirements for the Manufacture.Safety Requirements for the Construction. and Use Withdrawn ANSI B151.20 Plastic Sheet Production Machinery .21 Plastics Machinery . Care. Care.Plastics Extrusion Machines .4 Plastic Blown Film Machinery . Tows and Conveyors .14-1992) Inactive METHODS OF CHEMICAL ANALYSIS OF SILICON CARBIDE ABRASIVE GRAIN AND ABRASIVE CRUDE.Now Copyrighted by UAMA Active ANSI B74.Now Copyrighted by UAMA Active ANSI B74.28 Plastics Machinery. Care and Use Active ANSI B151. Care.Extrusion Blow Molding Machines . 9 Cutting Tools .Star Drills .This is Now Copyrighted by CCPA Active ANSI B212. OR COMPOSITION HUBS AND CORES . Handheld.This is Now Copyrighted by CCPA Active ANSI B212.10 Cutting Tools .Safety Requirements .Power-Driven Brushing Tools .Metal Chisels .POWER.Powered Chain Saws .1 Hand Tools .9 Hand Tools .This Is Now Copyrighted by CCPA Active ANSI B212.Revision of ANSI B212.7 Hand Tools .Metric Holders for Indexable Inserts Inactive ANSI B212. PLASTIC.2 Power Tools . End Mills.1 Pipe Tools .Nail-Puller Bars .Indexable (Throwaway) Hard-Metal Triangular and Square Inserts for Milling Cutters .Revision and Redesignation of ANSI B173.DocumentNumber Title Status ANSI B157.SAFETY REQUIREMENTS FOR DESIGN. and Use Withdrawn ANSI B173.This is Now Copyrighted by CCPA Active ANSI B212.48-1976 Inactive .8 Hand Tools . This IS Now Copyrighted by CCPA Active ANSI B212.DRIVEN BRUSHING TOOLS CONSTRUCTED WITH WOOD. Care and Use .Safety Requirements Withdrawn ANSI B175.3 Hand Tools .Safety Requirements Withdrawn ANSI B209. Internal-Combustion-Engine-Driven Cut-Off Machines – Safety Requirements .3 Cutting Tools . Scaling and Tinners' Setting Hammers .Safety Requirements Withdrawn ANSI B173.Safety Requirements .Hand-Held and Backpack.Safety Requirements Withdrawn ANSI B173.2 Inactive CARE. and Weighing Systems Withdrawn ANSI B165.Threaded Fasteners Used in the Carbide Tooling Industry .Safety Requirements Active ANSI B175.4 Cutting Tools .Safety Requirements Withdrawn ANSI B212.Revision of ANSI B94.Riveting.7-1980 Withdrawn ANSI B173.Body Repair Hammers and Dolly Blocks .2 Hand Tools .1 Envelope Manufacturing Machinery .2 Printing Ink Vertical Post Mixers .Safety Requirements for Design.Ball Peen Hammers .Safety Requirements Withdrawn ANSI B209.7 CUTTING TOOLS .8 Hand Tools .4 For Outdoor Power Equipment – Portable.Carbide Seats Used with Indexable Inserts for Clamp-Type Holders . Weighing Devices.1 Hand Tools .Carbide Blanks for Tipping Circular Saws .Indexable Inserts .Now Copyrighted by ABMA Withdrawn POWER TOOLS .This is Now Copyrighted by CCPA Active ANSI B212.Safety Requirements Withdrawn ANSI B209.1 Three-Roller Printing Ink Mills .Safety Requirements Withdrawn ANSI B173. ANSI B165.Heavy Striking Tools .Brick Chisels and Brick Sets .Metric Holders for Indexable Inserts .Bricklayers' Hammers and Prospecting Picks .3-1986.8 Cutting Tools .IDENTIFICATION SYSTEM Inactive ANSI B212.INDEXABLE INSERTS .Safety Requirements Withdrawn ANSI B173.Cord-Connected Portable Pipe Threading Machines and Portable Power Drives .Nail Sets .Safety Requirements Withdrawn ANSI B209.6 Hand Tools .Now Copyrighted by NPES Withdrawn ANSI B177.Precision Indexable Insert Cartridges .4 Hand Tools .1 Power Tools .This is Now Copyrighted by CCPA Active ANSI B212.3 Hand Tools .Precision Holders for Indexable Inserts . AND USE (WITHDRAWN) ANSI B169.Safety Requirements Withdrawn ANSI B209.Nail Hammers .Safety Requirements for the Construction.Dimensions .5 Cutting Tools .Carbide Blanks for Twist Drills.5 Hand Tools .Precision Indexable Insert Cartridges .3 Outdoor Power Equipment .Hatchets .2 Hand Tools .Grass Trimmers and Bushcutters .Wood Splitting Wedges .Gasoline.Safety Requirements Inactive ANSI B209.Safety Requirements Withdrawn ANSI B208.This is Now Copyrighted by CCPA Active ANSI B212.10 Cutting Tools .1 Power Tools .Safety Requirements Active ANSI B175. Gasoline-Engine-Powered Blowers Active ANSI B175.: 1990 Active ANSI B177.Safety Requirements Withdrawn ANSI B173.6 Cutting Tools .THREADED FASTENERS USED IN THE CARBIDE TOOLING INDUSTRY Inactive ANSI B212.1 Safety Requirements for Scales.Metal Punches and Drift Pins .5 Cutting Tools .This is Now Copyrighted by CCPA Active ANSI B212.4 CUTTING TOOLS . and Random Rod .2 Cutting Tools . Care.5 Hand Tools .7 Cutting Tools .Safety Requirements Withdrawn ANSI B209.Identification System . Reamers. Now Copyrighted by NEMA.Supplement C37.Now Copyrighted by NEMA. Removed at the request of NEMA Withdrawn ANSI C29. Removed at the request of NEMA Withdrawn ANSI C12.11 INSTRUMENT TRANSFORMERS FOR METERING PURPOSES.Suspension Type .9A . This is Now Copyrighted by CCPA ANSI B212.18 Inch Boring Bars for Indexable Inserts .This is Now Copyrighted by CCPA Active ANSI B212.12.Commonly Used Indexable Inserts .Now Copyrighted by NEMA.Now copyrighted by NEMA Withdrawn .Lithium Primary Batteries .This is Now Copyrighted by CCPA Active ANSI B212.Wet-Process Porcelain and Toughened Glass .Now copyrighted by IEEE Withdrawn ANSI C37.12-1977(R1987).35 SPECIFICATIONS FOR WEATHER-RESISTANT POLYOLEFIN-COVERED WIRE AND CABLE (WITHDRAWN) Inactive ANSI C12.DocumentNumber Title Status ANSI B212.Strain Type .Revision and Redesignation of ANSI B94.1 Indexable Screw-On Inserts with Partly Cylindrical Fixing Holes Commonly Used for Turning .Now Copyrighted by NEMA. Bonded to Indexable Inserts and Other Carriers .Now copyrighted by NEMA Withdrawn ANSI C29.Designation .Now Copyrighted by NEMA.Now Copyrighted by NEMA.Preferred Ratings and Related Required Capabilities . Removed at the request of NEMA Withdrawn ANSI C29.Specifications .5 Thermal Demand Meters . Removed at the request of NEMA Withdrawn ANSI C29.1989 (WITHDRAWN) Inactive ANSI C18.16 Cutting Tools .12 Turning Tools .Now Copyrighted by NEMA.6 MARKING AND ARRANGEMENT OF TERMINALS FOR PHASE-SHIFTING DEVICES USED IN METERING Inactive ANSI C12.Bore-Type Milling Cutters (Inch Series) . Removed at the request of NEMA Withdrawn ANSI C29.Specifications Guide .Designation .Spool Type .7 Wet Process Porcelain Insulators (High Voltage Line Post Type) .Revision and Redesignation of ANSI B94. SUPPLEMENT C18.12 Insulators Composites .6 SCHEDULES OF PREFERRED RATINGS FOR AC HIGH. Post-Type .SEALED RECHARGEABLE NICKEL-CADMIUM CYLINDRICAL BARE CELLS (REVISED TO ANSI C18.This is Now Copyrighted by CCPA Active ANSI C8.Now Copyrighted by NEMA.1989.Now Copyrighted by NEMA.Blanks for Carbide Burs .5 Wet-Process Porcelain Insulators .Designation and Dimensions Inactive ANSI B212. Removed at the request of NEMA Withdrawn ANSI C29. Cap and Pin Type) .Carbide-Tipped Masonry Drills and Blanks for Carbide-Tipped Masonry Drills .This is Now Copyrighted by CCPA Active ANSI B212.Type Milling Cutters (Inch Series) .17 Cutting Tools .1970 (WITHDRAWN) Inactive ANSI C37.Voltage Circuit Breakers Rated on a Symmetrical Current Basis .1 DRY CELLS AND BATTERIES . Removed at the request of NEMA Withdrawn ANSI C29. 15 KV AND LESS Inactive ANSI C18. Removed at the request of NEMA Withdrawn ANSI C29.Apparatus. This is Now Copyrighted by CCPA Active ANSI B212.10 WATTHOUR METERS Inactive ANSI C12.1 Electrical Power Insulators .9 Wet-Process Porcelain Insulators .VOLTAGE CIRCUIT BREAKERS RATED ON A TOTAL CURRENT BASIS (WITHDRAWN) Inactive ANSI C37.Blanks for Carbide Burs .Now copyrighted by NEMA Withdrawn ANSI C29. SUPPLEMENT C37.1A .and Medium-Voltage Types .This is Now Copyrighted by CCPA Active ANSI B212.Now copyrighted by NEMA. Remove at the request of NEMA Withdrawn ANSI C34.AC High.4 Wet-Process Porcelain Insulators .14 Carbide Seats Used With Indexable Inserts for Pin Lock-Type Holders .Tests . Removed at the request of NEMA Withdrawn ANSI C29.06A .06 Withdrawn Now copyrigted by NEMA ANSI C37.Suspension Type .9 TEST CODE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A TOTAL CURRENT BASIS (R 1976).11 Cutting Tools .8 Wet Process Porcelain Insulators (Apparatus.Test Methods .Designation System for Extra Hard Cutting Surfaces.Revision and Redesignation of ANSI B94.11 Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis or a Total Current Basis .6 Wet Process Porcelain Insulators (High Voltage Pin Type) .13-1976 Inactive ANSI B212.15A-1995 Never Published.3 Wet Process Porcelain Insulators .18 for Inch Boring Bars for Indexable Inserts Designation and Dimensions . ANSI C37.This is Now Copyrighted by CCPA Active ANSI B212.SPECIFICATIONS.25-1982. Removed at the request of NEMA Withdrawn ANSI C29.07 Interrupting Capability Factors for Reclosing Service for AC High-Voltage Circit Breakers Withdrawn ANSI C37.16 Cutting Tools .3M Primary Batteries .2M-1991) Inactive ANSI C18. Removed at the request of NEMA Withdrawn ANSI C29.This is Now Copyrighted by CCPA Active Cutting Tools .12 AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis .Indexable Insert Shank.11 Composite Suspension Insulators for Overhead Transmission Lines .2 PRACTICES AND REQUIREMENTS FOR SEMICONDUCTOR POWER RECTIFIERS (R 1973) (WITHDRAWN) Inactive Switchgear .2 BATTERIES .Now Copyrighted by NEMA. Incorporates ANSI ANSI B212.Now Copyrighted by NEMA.2 Insulators .10 Wet Process Porcelain Insulators (Indoor Apparatus Type) .15 Active B212.19 Cutting Tools .Low. COOLED. 240/ 120 Volts. Removed at the request of NEMA Withdrawn GUIDE FOR APPLICATION.DIGITAL MEASURING INSTRUMENTS (WITHDRAWN) Inactive ANSI C39.12. Single-Phase Distribution Transformers with High-Voltage Bushings.Cylindrical. High -Voltage. 167 KVA and Smaller. Low-Voltage.This is Now Copyrighted by IEEE Active ANSI C50. Single-Phase. 34 500 GrdY/19 920 Volts and ANSI C57.13 Rotating Electrical Machinery . Specs.Circuit-Breaker Switchgear Assemblies . High ANSI C57. Removed at the request of NEMA Withdrawn Conformance Test Procedures for Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear .Schedules of Preferred Ratings. Specs.Now copyrighted by NEMA. 34 500 GrdY/19 920 Volts and Below.52 Low-Voltage AC Power Circuit Protectors Used in Enclosures.10 Rotating Electrical Machinery .BALANCING ELECTRICAL MEASURING INSTRUMENTS (R 1972) (WITHDRAWN) Inactive ANSI C39.Low-Voltage AC Power Circuit Breakers Used in Enclosures .Pad-Mounted.26 Withdrawn Voltage.Pad. ERRATUM (WITHDRAWN) Inactive ANSI C39.LINE COMPENSATION (WITHDRAWN) Inactive Transformers . Low-Voltage. SINGLE-PHASE DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS- ANSI C57. for . Bus Supports.45 Distribution Enclosed Single-Pole Air Switches.Now copyrighted by ANSI C50.1992 .Now copyrighted by NEMA. 167 KVA AND SMALLER Transformers .Alternating-Current High -Voltage Power Vacuum Interrupters .Now copyrighted by NEMA.230 kV and Below 833/958 Through 8333/10 417 kVA.Synchronous Machines .121 Switchgear . Removed at the request of Withdrawn NEMA Transformers . Removed at the ANSI C37. Removed at the request of NEMA Withdrawn Switchgear . Revised and Redesignated to ANSI/IEEE C57.Hydrogen-Cooled.23 Inactive HIGH-VOLTAGE.4 AUTOMATIC NULL . Test Procedures for .Now copyrighted by NEMA.12.31 CHARACTERISTICS OF ELECTRICAL AND MECHANICAL INDOOR APPARATUS INSULATORS.7 REQUIREMENTS FOR ELECTRONIC ANALOG VOLTMETERS (WITHDRAWN) Inactive ANSI C50. Removed at the request of NEMA Withdrawn ANSI C37.Conformance Test Procedures .2 SERIES CAPACITORS FOR TRANSMISSION .12. 240/120 Volts. AND ACCESSORIES (R 1974) ANSI C37.44 Distribution Oil Cutouts and Fuse Links.12 Requirements for Salient-Pole Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications .Now Copyrighted by NEMA.Conformance Test Procedures . High- ANSI C57.3 SHOCK TESTING FOR ELECTRICAL INDICATING INSTRUMENTS (WITHDRAWN) Inactive ANSI C39. Removed at the ANSI C37. DISTRIBUTION ENCLOSED SINGLE-POLE AIR ANSI C37. POWER FUSES.Now copyrighted by NEMA.Test Procedures .6 ELECTRICAL INSTRUMENTATION .55 Switchgear . Self-Cooled.This is Now Copyrighted by IEEE Withdrawn ANSI C50.Conformance Testing .Rated Control Voltages and Their Ranges (Addition to Table 1) . OPERATION.DocumentNumber Title Status ANSI C37. LOW-VOLTAGE. 2500 kVA and Smaller .2 DIRECT . SECONDARY FUSES.32 Withdrawn Revised and Redesignated to ANSI/ NEMA C37.UNDERGROUND-TYPE. 240/120 V.12.Safety Requirements for X-Radiation Limits . 167 kVA and Smaller . Removed at the request of ANSI C37.Rotor Synchronous Generators .32-1996 ANSI C37.50 Switchgear .48 Inactive SWITCHES.1 Switchgear .12. for Active ANSI C37.Safety Requirements . 34 500 Grd Y/19 920 Volts and Below.46 High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches . Including Unit Substations Withdrawn Pad-Mounted.Now copyrighted by NEMA.26.January 1990.5 SAFETY REQUIREMENTS FOR ELECTRICAL AND ELECTRONIC MEASURING AND CONTROLLING INSTRUMENTATION.51 Withdrawn request of NEMA ANSI C37.53.Now copyrighted by NEMA Withdrawn ANSI C37. and Switch Accessories .Now copyrighted by NEMA Withdrawn ANSI C50. Self-Cooled. 24 940 GRD Y/14 400 V AND BELOW.1 Electrical Analog Indicating Instruments.33 Switchgear .Now copyrighted by NEMA Withdrawn ANSI C37. Removed at the request of NEMA Withdrawn ANSI C37. and Application Guide - ANSI C37. Compartmental-Type.Now copyrighted by NEMA. Removed at the request of NEMA Withdrawn ANSI C39.Cylindrical.10 Withdrawn Changing.Now copyrighted by NEMA.57 Switchgear .Metal-Enclosed Interrupter Switchgear Assemblies . FUSE DISCONNECTING SWITCHES.66 Requirements for Oil-Filled Capacitor Switches for Alternating-Current Systems Inactive Switchgear .Mounted Compartmental.58 Withdrawn NEMA ANSI C37. Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors. Compartmental-Type.Requirements .Now copyrighted by NEMA.Unit Substations .Corrections .Requirements .Now copyrighted by NEMA. AND MAINTENANCE OF DISTRIBUTION CUTOUTS AND FUSE LINKS.High-Voltage Air Switches . Cylindrical-Rotor Synchronous Generators . and 3750/ 4687 Through 60 000/ 80 000/100 000 kVA with Load Tap Changing .12 Requirements for Salient-Pole Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Inactive ANSI C50.Medium Voltage Metal-Clad Assemblies .Metal-Enclosed Low-Voltage AC Power. Combustion-Gas-Turbine-Driven. Manufacturing Specifications.12.Now copyrighted by NEMA. Requirements for .13-77 Inactive Rotating Electrical Machinery . (R 1976) (REVISED AND REDESIGNATED AS ANSI C29.Requirements .Type.AND DISTRIBUTION .Conformance Test Procedures .High-Voltage Current-Limiting Motor-Starter Fuses .Supersedes ANSI/IEEE C50.Rotor Synchronous Generators .12.13 Rotating Electrical Machinery . SELF.25 Voltage. Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors.47 High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches .15 Withdrawn NEMA ANSI C55.Now copyrighted by NEMA TRANSFORMERS .Now copyrighted by NEMA ANSI C57.85 Withdrawn request of NEMA ANSI C37. and 750/862 Through 60 000/ 80 000/100 000 kVA. Removed at the request of NEMA Withdrawn ANSI C37.21 Withdrawn Below.10-89) Inactive Switchgear High-Voltage Air Switches. Self-Cooled. Requirements for Withdrawn ANSI C39.ACTING ELECTRICAL RECORDING INSTRUMENTS (SWITCHBOARD AND PORTABLE TYPES) (R 1969) (WITHDRAWN) Inactive ANSI C39.13 Conformance Requirements for Liquid-Filled Transformers Used in Unit Installations. Removed at the request of NEMA Withdrawn ANSI C37. Three-Phase Without Load Tap ANSI C57. with High-Voltage 34 500 Volts and Below. Removed at the request of NEMA Sealed Dry-Type Power Transformers.Now copyrighted by NEMA. and Test Code for Current-Limiting ANSI C57. Including Unit Substations.20B .20-1989) Inactive ANSI C78.12.Revision and Consolidation of ANSI C78. G. AND TEST CODE FOR STEP-VOLTAGE AND INDUCTION-VOLTAGE REGULATORS Inactive ANSI C57. 120. Correction June 1982 Ventilated Dry-Type Power Transformers.Now copyrighted by NEMA.51 Withdrawn for .STREET RAILWAY SERVICE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.21 Incandescent Lamps .1995 ANSI C78.Incandescent Lamps .Dimensional and Electrical Characteristics . Low-Voltage 216Y/125 and ANSI C57. TERMINOLOGY.Now copyrighted by NEMA.103 INCANDESCENT LAMPS .Now copyrighted by NEMA Withdrawn Transformers .Now copyrighted by NEMA. 120.96 Inactive TRANSFORMERS Guide for Loading Dry-Type and Oil-Immersed Current-Limiting Reactors Appendix to American Standard Requirements. LOCOMOTIVE.1 Fluorescent Lamps .2 GUIDE FOR THE APPLICATION OF VALVE-TYPE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS.Revision and Consolidation of C78.Now copyrighted by NEMA.Miscellaneous Types .A.15) Inactive GUIDE FOR LOADING DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS APPENDIX TO AMERICAN NATIONAL STANDARD POWER AND DISTRIBUTION ANSI C57. C28.LIMITING REACTORS (R 1971) (WITHDRAWN) Inactive ANSI C57.21a-1996. Removed at the request of NEMA.4 Withdrawn 1997.Revised and Redesignated to ANSI/ NEMA C57.12.Requirements .2 Fluorescent Lamps .99 Withdrawn Reactors.12. SUPPLEMENT C73A . THREE-PHASE. 501 kVA and Larger.12. Single-Phase.100 GENERAL-SERVICE INCANDESCENT LAMPS FOR 120-.Now copyrighted by NEMA.22 Withdrawn C78.12.23 Withdrawn NEMA C78.Dimensional and Electrical Characteristics . C78.20 Electric Lamps .41 Electric Lamps: Guidelines for Low Pressure Sodium Lamps .Pad.223.55 Transformers .208.Incandescent Lamps . C78. Removed at the request of NEMA ANSI C78. Removed at the request of NEMA Withdrawn ANSI C78. Three-Phase.27 Liquid-Filled Distribution Transformers Used in Pad-Mounted Installations. C78.Now copyrighted by IEEE Withdrawn REQUIREMENTS FOR LOAD-TAP-CHANGING TRANSFORMERS 230 000 VOLTS AND BELOW.12.DocumentNumber Title Status ANSI C57.Dimensional and Electrical Characteristics .40-1994 Ventilated Dry-Type Distribution Transformers. C57. with High-Voltage 601 to 34 500 Volts. (REVISED ANSI C57.21-89) Inactive ANSI C78.Now copyrighted by NEMA. Removed at the request of NEMA Withdrawn ANSI C78. 501 kVA and Larger. AND 130-VOLT CIRCUITS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.22-1995 Electric Lamps . and Similar Shapes With E39 Mogul Screw Bases .22-89) Inactive ANSI C78. AND COUNTRY HOME SERVICE 30-34 AND 60-64 VOLTS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.Method of Measurement .Supplement to C73-1973.50 Withdrawn 600 Volts.This is Now Copyrighted by IEEE ANSI C57.Ventilated Dry-Type Network Transformers 2500 kVA and Below. C78. C78. Three-Phase.Supplement C78. CORRECTION .Dry-Type Transformers Used in Unit Installations.21-89) Inactive .20-1995 Withdrawn ANSI C78. Three-Phase. Now copyrighted by NEMA. C78.AND 250-VOLT CIRCUITS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. Removed at the request of NEMA Withdrawn Electric Lamps . Removed at the request of NEMA ANSI C57.107 INCANDESCENT LAMPS . Requirements ANSI C57. AND TEST CODE FOR CURRENT .PROJECTOR AND REFLECTOR SPOT AND FLOOD. AND 130 VOLTS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.20-89 AND C78.25 Electric Lamps .16-1958 ANSI C62.Now copyrighted by NEMA. Low-Voltage 208Y/120 to 4160 Volts.101 GENERAL SERVICE INCANDESCENT LAMPS FOR 230.Lamp-Base Temperature Rise .Mounted Equipment . ANSI C78.22-89) Inactive ANSI C78. and Similar Shapes with E26 Medium Screw Bases .235.A. 1 to 500 kVA.Preheat-Start Types .Self-Supporting.200.12.52 Withdrawn Now copyrighted by NEMA. C78.105.1980 (REVISED AND REDESIGNATED ANSI C73 Inactive AS NEMA WD6-88) ANSI C73A Dimensions of Attachment Plugs and Receptacles for Marine Ship-to-Shore Use for Small Craft .1991.245.10-88) SECONDARY NETWORK TRANSFORMERS .Now copyrighted by NEMA.20-89 AND C78. Requirements for . Low-Voltage 208Y/120 to 4160 Volts.SPOTLIGHT AND FLOODLIGHT SERVICE. Requirements for - ANSI C57.4c-1998.Instant-Start and Cold-Cathode Types . Removed at the request of NEMA Withdrawn ANSI C78. G.3 Fluorescent Lamps . AND 130 VOLTS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. C78.12.20-89 AND C78.15 REQUIREMENTS.Includes Supplement C78.20-89 AND C78.4a- ANSI C78.4e-1999.Conformance Standard .222. C78.VOLTAGE AND INDUCTION.23 . C78. PS. Revised and Redesignated to ANSI/ ANSI C78. Removed at the request of NEMA Withdrawn American National Standard for Fluorescent Lamps .Enclosure Integrity for Coastal Environments .224. C78. Revised and Redesignated to ANSI/ NEMA C78.70 Terminal Markings and Connections for Distribution and Power Transformers .214.106 INFRARED LAMPS FOR 115-125 VOLT SERVICE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.40 Inactive 1994) . 3750/4687 THROUGH 60 000/80 000/100 000 KVA.207.Rapid-Start Types .225.12.101.PAR and R Shapes .12.40- ANSI C57. C78.4d-1998. with High-Voltage 601 to 34 500 Volts. Single-Based Compact Types . 125-.95 GUIDe FOR LOADING OIL-IMMERSED STEP. Removed at the request of NEMA Withdrawn ANSI C78.MAY 1982 Inactive DIMENSIONS OF ATTACHMENT PLUGS AND RECEPTACLES FOR MARINE SHIP-TO-SHORE USE FOR SMALL CRAFT. 125. Revised to ANSI/NEMA C78.Dimensional and Electrical Characteristics . Removed at the request of NEMA Withdrawn ANSI C78.202. 125.16 REQUIREMENTS. TERMINOLOGY.103.VOLTAGE REGULATORS (APPENDIX TO C57. Low-Voltage 120 to ANSI C57.30 Inactive AND CONSOLIDATED AS C57.57 Withdrawn 480Y/277 Volts. PS.SUBWAY AND VAULT TYPES (LIQUID IMMERSED) . with High-Voltage 601 to 34 500 Volts.109. Three-Phase.REQUIREMENTS (REVISED AND REDESIGNATED TO ANSI/ NEMA C57. Removed at the request of NEMA Withdrawn ANSI C57.17 REQUIREMENTS FOR ARC FURNACE TRANSFORMERS (R 1971) (WITHDRAWN) Inactive ANSI C57.12.Includes Supp C78.102 INCANDESCENT LAMPS TRAIN.40 Specifications for Mercury Lamps .81 Electric Lamps . *NOT CURRENT DOCUMENT Withdrawn ANSI C78.29 Switchgear and Transformers .22-89) Inactive ANSI C78. Conformance Requirements for Withdrawn ANSI C57.Incandescent Lamps . C78.100. and 15 to 500 kVA. Including Unit Substations .Dimensional and Electrical Characteristics .22-89) Inactive ANSI C78. C78. C78.105 INCANDESCENT LAMPS . Terminology. 234.Now copyrighted by NEMA. C78.Double-Capped Fluorescent Lamps .12.Now copyrighted by NEMA Withdrawn ANSI C78.12. MEDIUM SKIRTED (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.MAXIMUM 4 1/4 INCHES.20-89) ANSI C78.224 PS-40 BULB. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.23-89) Inactive ANSI C78. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.245 INCANDESCENT LAMPS PS-25 BULB. Removed at the request of NEMA Withdrawn ANSI C78.200 S-6 BULB. THREE-CONTACT MOGUL SCREW BASE (R 1969) (WITHDRAWN) Inactive ANSI C78.23-89) Inactive ANSI C78.205 A-17 BULB. MEDIUM SCREW BASE (OVERALL LENGTH .216 A-21 BULB.110 TRAFFIC-SIGNAL INCANDESCENT LAMPS FOR 120-.221 PS-30 BULB.MAXIMUM 8 INCHES. MIN 5-9/16 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI ANSI C78.20-89) Inactive ANSI C78. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. AND 130-VOLT CIRCUITS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI ANSI C78.DocumentNumber Title Status ANSI C78.22-89) Inactive ANSI C78. MOGUL BIPOST BASE (R 1960) (WITHDRAWN) Inactive . MOGUL SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. MEDIUM SCREW BASE (OVERALL LENGTH .225 PS-52 BULB. MEDIUM SCREW BASE (R 1981) (WITHDRAWN) Inactive ANSI C78. MOGUL SCREW BASE (OVERALL LENGTH . MEDIUM SKIRTED SCREW BASE INCANDESCENT LAMPS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.180 Specifications for Fluorescent Lamp Starters .208 T-10 BULB. MINIMUM 7 7/16 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.20-89) Inactive ANSI C78.204 A-15 BULB. INTERMEDIATE SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.Now copyrighted by NEMA. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI ANSI C78.212 INCANDESCENT LAMPS T-8 BULB. MINIMUM 4 1/16 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.MAXIMUM 4 7/16 INCHES. DOUBLE-CONTACT MEDIUM SCREW BASE INCANDESCENT LAMPS (OVERALL LENGTH: 5-15/16 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI ANSI C78.235 G-40 BULB.20- ANSI C78.220 INCANDESCENT LAMPS PS-25 BULB.215 A-21 BULB.23-89) Inactive ANSI C78. MINIMUM 3 9/16 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.20-89) Inactive A23 BULB.211 Inactive 89) ANSI C78.109 INCANDESCENT LAMPS STREET SERIES SERVICE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.22-89) Inactive ANSI C78.20-89) Inactive ANSI C78.21-89) Inactive ANSI C78.20-89) Inactive A-21 BULB.237 R-40 BULB (SOFT GLASS).22-89) Inactive ANSI C78.22-89) Inactive ANSI C78. MINIMUM 6 1/2 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. THREE-CONTACT MOGUL SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.226 INCANDESCENT LAMPS P-25 BULB.20-89) ANSI C78.20-89) Inactive A-19 BULB.MAXIMUM 4 7/16 INCHES. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.22-89) Inactive ANSI C78.213 INCANDESCENT LAMPS PS-25 BULB.22-89) Inactive ANSI C78.MAXIMUM 4 15/16 INCHES. MEDIUM SCREW BASE INCANDESCENT LAMPS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.222 PS-30 BULB.234 G-40 BULB. MEDIUM SCREW BASE (OVERALL LENGTH .227 Inactive C78.MAXIMUM 7 1/16 INCHES. MOGUL SCREW BASE (OVERALL LENGTH .217 Inactive 89) A23 BULB.238 INCANDESCENT LAMPS SCREW BASE PAR-38 BULB. MINIMUM 4 9/16 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.218 Inactive C78. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. CANDELABRA SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO C78.210 Inactive 89 A-19 BULB.20- ANSI C78.20-89) Inactive ANSI C78.20-89) Inactive ANSI C78.20-89) Inactive ANSI C78. MEDIUM SCREW BASE INCANDESCENT LAMPS (OVERALL LENGTH: MAX 6-1/16 INCHES. CANDELABRA SCREW BASE C-7 BULB. MINIMUM 4 1/8 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.207 T-6 1/2 BULB. MEDIUM SCREW BASE (OVERALL LENGTH .20-89) Inactive ANSI C78.21-89) Inactive ANSI C78.20- ANSI C78.MAXIMUM 3 15/16 INCHES. MOGUL SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. MOGUL SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.201 S-11 BULB.23-89) Inactive A-19 BULB. MEDIUM SCREW BASE INCANDESCENT LAMP (OVERALL LENGTH 5 5/16 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.21-89) Inactive ANSI C78. MINIMUM 3 7/8 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI ANSI C78.20-89) Inactive ANSI C78. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. MEDIUM SCREW BASE (OVERALL LENGTH .223 PS-35 BULB.22-89) Inactive ANSI C78.22-89) Inactive ANSI C78. MOGUL SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.206 Inactive 89) ANSI C78. MOGUL SCREW BASE INCANDESCENT LAMP (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.248 INCANDESCENT LAMPS T-64 BULB. MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.203 S-14 BULB.214 INCANDESCENT LAMPS PS-25 BULB. 125-.236 R-40 BULB (SOFT GLASS). MEDIUM SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.219 INCANDESCENT LAMPS G-30 BULB.20- ANSI C78.22-89) Inactive ANSI C78.233 INCANDESCENT LAMPS G-30 BULB.202 S-11 BULB. THREE-CONTACT MEDIUM SCREW BASE (R 1981) Inactive ANSI C78. INTERMEDIATE SCREW BASE (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78. 1377 Electric Lamps .42-1995) Inactive ANSI C78.1342 Electric Lamps . 100-Volt S67 Single-Ended High. for .250.Double Capped Fluorescenet Lamps .385 Methods of Measurement of Glow Lamps .381 Method for the Designation of Glow Lamps .SPECIFICATIONS.42-1995 Withdrawn ANSI C78.1375 Electric Lamps .MINIATURE AND SEALED BEAM INCANDESCENT LAMPS .Includes Supplements C78.21-89) Inactive ANSI C78.WATT. S66 High-Pressure Sodium Lamps .WATT.21-89) Inactive ANSI C78.450-Watt.370-1997 Inactive ANSI C78.1341 Electric Lamps . Removed at the request of NEMA Withdrawn ANSI C78. S62 SINGLE. Removed at the request of NEMA Withdrawn ANSI C78.Now copyrighted by NEMA.Methods of Measuring Characteristics . 100-VOLT S50 SINGLE-ENDED HIGH. M58 Single-Ended Metal-Halide Lamps .1356 Electric Lamps .258 PAR 46 BULB. 52-VOLT. ANSI C78. 52-VOLT S76 HIGH.PRESSURE SODIUM LAMPS (CONSOLIDATED TO ANSI/ NEMA C78.35-WATT.PRESSURE SODIUM LAMPS (CONSOLIDATED TO ANSI/NEMA C78.Physical Characteristics .42-1995) Inactive ANSI C78. Revised to NEMA C78.Now copyrighted by NEMA Withdrawn ANSI C78. MIN 5-7/8 INCHES) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI ANSI C78.370 Method for the Designation of Photo Lamps .255 R-40 BULB (HARD GLASS).310-Watt.254 R-20 BULB MEDIUM SCREW BASE INCANDESCENT LAMP (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.IEC C78.Now copyrighted by NEMA.250-Watt.Specifications .Supplement C78.Single Base Fluorescent Lamps .WATT.1000.1377-1996 Inactive ANSI C78. S52 SINGLE-ENDED HIGH.Revised to NEMA C78.390 ELECTRIC LAMPS . 100-VOLT.Now copyrighted by NEMA.Revised to NEMA C78.1350 ELECTRIC LAMPS .1353 ELECTRIC LAMPS .750-Watt.42-1995) Inactive ANSI C78.261 Specification for Tubular Incandescent Infrared Lamps . M59 Single-Ended Metal-Halide Lamps .50-WATT S68 SINGLE-ENDED HIGH-PRESSURE SODIUM LAMP (CONSOLIDATED TO ANSI/ NEMA C78.21-89) Inactive ANSI C78.376 Chromaticity of Fluorescent Lamps.1195-2001.ENDED HIGH-PRESSURE SODIUM LAMPS (CONSOLIDATED TO ANSI/ NEMA C78.200-Watt. 120-Volt Self-Ballasted Mercury Lamps .42-1995 Withdrawn ANSI C78.21-89) Inactive ANSI C78.Now copyrighted by NEMA.Tubular Tungsten-Halogen Lamps .70-WATT.1378-1996 Inactive .Now copyrighted by NEMA.160-Watt 120-Volt B87 Self-Ballasted Mercury Lamps . Specs.Now copyrighted by NEMA.400. 250-VOLT.42- ANSI C78. M57 Single-Ended Metal-Halide Lamps .WATT.400-Watt.379a-1997.PRESSURE SODIUM LAMPS (CONSOLIDATED TO ANSI /NEMA C78. MEDIUM SCREW BASE INCANDESCENT LAMPS (OVERALL LENGTH: MAX 6-5/16 INCHES.387a-1998.379 Classification of the Beam Patterns of Reflector Lamps .1358A . Removed at the request of NEMA Withdrawn ANSI C78. 230-Volt.Consolidated to ANSI/ NEMA C78.Metal-Halide Lamps . MEDIUM SKIRTED SCREW BASE INCANDESCENT LAMPS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.1359 ELECTRIC LAMPS .1357 Electric Lamps . S51 SINGLE-ENDED HIGH.Now copyrighted by NEMA.21-89) Inactive ANSI C78.387 Withdrawn Removed at the request of NEMA ANSI C78.21-89) Inactive A23 BULB.386 Electric Lamps .42 -1995) Inactive ANSI C78.Now copyrighted by NEMA Withdrawn ANSI C78.Pressure Sodium Lamps . Now copyrighted by NEMA.21-89) Inactive ANSI C78.Consolidated to ANSI/ NEMA C78.150-Watt 100-Volt S56 High-Pressure Sodium Lamp .150.42-1995 Withdrawn ELECTRIC LAMPS .390-1992) Inactive ANSI C78. Removed at the request of NEMA Withdrawn ANSI C78.257 R-40 BULB (HARD GLASS).Safety Specifications .1351 ELECTRIC LAMPS . 100-Volt. 55-VOLT S55 HIGH-PRESSURE SODIUM LAMPS (CONSOLIDATED TO ANSI/ NEMA C78. Removed at the request of NEMA Withdrawn ANSI C78.175-Watt.253 Inactive C78.1375-1996 Inactive ANSI C78.1990 (CONSOLIDATED TO ANSI/NEMA C78.1352 ELECTRIC LAMPS .256 R-40 BULB (HARD GLASS).Mercury Lamps .388 Electric Lamps . Removed at the request of NEMA Withdrawn ANSI C78. S54 SINGLE-ENDED HIGH.WATT.Consolidated to ANSI/ NEMA C78.1360 Electric Lamps . Now copyrighted by NEMA. INCANDESCENT LAMP (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.High-Pressure Sodium Lamps . B75 Self-Ballasted Mercury Lamps .Specifications .1195 Electric Lamps .260 Electric Lamps . MEDIUM SIDE PRONG BASE.1355 ELECTRIC LAMPS . MEDIUM SCREW BASE INCANDESCENT LAMPS (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.42-1995) Inactive ANSI C78. C78.42-1995) Inactive ANSI C78. 55-VOLT.100.1354 ELECTRIC LAMPS . INCANDESCENT LAMP (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.251 R-30 BULB MEDIUM SCREW BASE INCANDESCENT LAMP (CORRECTED 8/7/67) (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.1358 Inactive 1995) ANSI C78.Now copyrighted by NEMA Withdrawn Electric Lamps .1340 Electric Lamps .Methods of Measuring Characteristics .259 PAR-56 BULB MOGUL END PRONG BASE INCANDESCENT LAMP (R 1981) (REVISED AND CONSOLIDATED INTO ANSI C78.Methods of Measuring Characteristics .Revised to NEMA C78.PRESSURE SODIUM LAMPS (CONSOLIDATED TO ANSI/ NEMA C78. SUPPLEMENT C78.Dimensional and Electrical Characteristics . Removed at the request of NEMA Withdrawn ANSI C78.Now copyrighted by NEMA.1378 Electric Lamps .370A-1994. Removed at the request of NEMA Withdrawn ANSI C78.901 Electric Lamps . Removed at the request of NEMA Withdrawn ANSI C78.DocumentNumber Title Status ANSI C78. Now copyrighted by NEMA. Removed at the request of NEMA Withdrawn ANSI C78.See NEMA for Supplement C78.PRESSURE SODIUM LAMPS . MOGUL SCREW BASE.42-1995) Inactive ANSI C78.20-89) ANSI C78.METHOD OF DESIGNATION (REVISED AND REDESIGNATED TO NEMA C78.387b-1998. Projection Lamps .EJL Projection Lamp Withdrawn ANSI C78.Single-Contact Medium Prefocus Base-Down-Type Projection Lamps .70-Watt M85 Metal-Halide Lamps Withdrawn ANSI C78.Now copyrighted by NEMA.1451 . and GU5.Use of Protective Shields with Tungsten-Halogen Lamps .1402 Dimensions for Projection Lamps .Includes Supplement C78.Double-Contact. Removed at the request of NEMA Withdrawn ANSI C78. Base-Down Type . Rim Reference. Removed at the request of NEMA Withdrawn Electric Lamps .3. Tungsten Halogen Lamps with GX5. 36. Removed at the request of NEMA Withdrawn ANSI C78. Now copyrighted by NEMA.1 Rigid Steel Conduit .5 Aluminum Rigid Conduit .Method for Life Testing .1401 Dimensions for Projection Lamps .Now copyrighted by NEMA. Removed at the request of NEMA Withdrawn Electric Lamps .EML Projection Lamp .1418 Electric Lamps .1419 Electric Lamps .1404 Electric Lamps .Now copyrighted by NEMA. Base-Up Type .EMM Projection Lamp . Removed at ANSI C78. Removed at the request of NEMA Withdrawn ANSI C78.Now copyrighted by NEMA.2 RIGID STEEL CONDUIT .1415-1989 and ANSI C78.9 Bases .DNF Projection Lamp .1452 Electric Lamps .6 Intermediate Metal Conduit . Prefocus-Base Projection Lamps .Cautionary Notice .Dimensions .1451 Electric Lamps .1411 Electric Lamps .(ARC) .Incandescent Projection Lamps .Revised/Consolidated to NEMA C78.1460 Withdrawn at the request of NEMA Electric Lamps .1406 Electric Lamps .5 mm LCL.Now copyrighted by NEMA. T6 Bulb.3 Bases - ANSI C78. Now copyrighted by NEMA.1995 Withdrawn ANSI C78. Removed ANSI C78.Single-Ended Tungsten.Specifications . Removed at the request of NEMA Withdrawn .1420 Withdrawn Consolidation Revision of ANSI C78. Removed at the request of NEMA Withdrawn ANSI C78.3.Vocabulary .Now copyrighted by NEMA.Revised/Consolidated to NEMA C78.1. Removed at the request of NEMA ANSI C78.Dimensions and Cantering Systems for Projection Lamps .MR11-2 Withdrawn of NEMA ANSI C79.3 ELECTRICAL METALLIC TUBING . Removed at the request of NEMA Withdrawn ANSI C79. Removed at the request of NEMA Withdrawn ANSI C78. Medium Ring.1415 Electric Lamps .EYB Projection Lamp .Four-Pin.FHS Projection Lamps Withdrawn ANSI C78.Two-Inch (51mm) Dichroic Coated Integral Reflector.5 Base.1434 Withdrawn the request of NEMA ANSI C78. 76.ELH Projection Lamp Inactive ANSI C78.Now copyrighted by NEMA.First Edition. Removed at the request of NEMA Withdrawn ANSI C78.CBA Projection Lamp .Now copyrighted by NEMA.1431-1997 Inactive ANSI C78.Now copyrighted by NEMA.1380 Electric Lamps .Microfilm Projection Lamps .ENG Projection Lamp . Four-Pin.1405 Electric Lamps .Now copyrighted by NEMA. Removed at the request ANSI C78.1431-1997 Inactive ANSI C78.1408 Electric Lamps . 120-Volt Self-Ballasted Mercury Lamps .EXR Projection Lamp Withdrawn ANSI C78.1413 Withdrawn .Now copyrighted by NEMA.Now copyrighted by NEMA.375 Inch (35mm) Integral Reflector Lamps with Front Covers and GU4 or GZ4 Bases .Condenser-Reflector.2 Nomenclature for Molded Glass Flares Intended for Use with Electron Tubes and Electric Lamps Withdrawn ANSI C80.1426 Electric Lamps .DED Projection Lamp Inactive ANSI C78.1381 Electric Lamps .1450 Electric Lamps .EXW Projection Lamp Withdrawn ANSI C78.51 mm (Two-Inch) Integral Reflector Rim Reference Lamps with GX5. Removed at the request of NEMA ANSI C78. Removed at the request of NEMA Withdrawn Electric Lamps .3 Bases ANSI C78.Zinc Coated (GRC) .3-1994) Inactive ANSI C80.1 Nomenclature for Glass Bulbs Intended for Use with Electric Lamps . GY5.Now copyrighted by NEMA. Removed at the request of NEMA Withdrawn ANSI C78.1422 Electric Lamps .Dimensions .ELB Projection Lamp Withdrawn ANSI C78.Now copyrighted by NEMA Withdrawn ANSI C78.1420-1997.DocumentNumber Title Status ANSI C78.1425 Electric Lamps . Removed at the request of NEMA Withdrawn ANSI C80. Removed at the request of NEMA Withdrawn ANSI C78.DDM Projection Lamp Withdrawn ANSI C78. Prefocus.1423 Electric Lamps .1410 Electric Lamps .Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.Halogen Lamps GZ9.1409 Electric Lamps .Now copyrighted by NEMA.ELC Projection Lamp Withdrawn ANSI C78.ZINC COATED (REVISED AND REDESIGNATED TO ANSI /NEMA C80.250-Watt.1424 Electric Lamps .1416 Electric Lamps .1b-1998.1407 Electric Lamps .1412 Electric Lamps . Now copyrighted by NEMA.ENAMELED (WITHDRAWN) Inactive ANSI C80.ENH Projection Lamp .Zinc Coated (IMC) .2 mm MOL with Proximity Reflector .1414 Electric Lamps .Now copyrighted by NEMA.Now copyrighted by NEMA.EXY Projection Lamp Withdrawn Electric Lamps .Now copyrighted by NEMA.Revised and Redesignated to ANSI/NEMA C78. Removed at the request of NEMA Withdrawn ANSI C80. 15M BASIC SYSTEM PARAMETERS FOR 1-IN TYPE B HELICAL.Methods of Measurement .Now copyrighted by NEMA Withdrawn ANSI C93. Removed at the request of NEMA Withdrawn ANSI C84. Removed at the request of NEMA Withdrawn ANSI C81.9 Withdrawn Now copyrighted by NEMA.2 REQUIREMENTS FOR POWER .6 Reference Ballasts for High-Intensity-Discharge Lamps . Supplement C82.1988 (REVISED AND REDESIGNATED ANSI C82.61 Electrical Lamp Bases .Now copyrighted by NEMA.DocumentNumber Title Status ANSI C81. Now copyrighted by NEMA. Removed at the request of NEMA ANSI C82.21M DIMENSIONS AND LOCATION OF RECORDS FOR 3/4-IN TYPE E HELICAL-SCAN VIDEO TAPE CASSETTE RECORDING (REVISED AND REDESIGNATED AS SMPTE 21M-86) Inactive ANSI C98. Removed at the request of NEMA Withdrawn ANSI C82.Now copyrighted by NEMA. Removed at the request of NEMA Withdrawn ANSI C82.3 Power-Line Carrier Line Traps.LINE COUPLING CAPACITOR VOLTAGE TRANSFORMERS.1 LOW-VOLTAGE CARTRIDGE FUSES 600 VOLTS OR LESS (R 1978) (WITHDRAWN) Inactive ANSI C98.1 Electric Connectors .16M DIMENSIONS AND LOCATION OF RECORDS FOR 1-IN TYPE B HELICAL-SCAN VIDEO TAPE RECORDING (REVISED AND REDESIGNATED AS SMPTE 16M-87) Inactive FREQUENCY RESPONSE AND OPERATING LEVEL OF RECORDERS AND REPRODUCERS FOR AUDIO RECORDS FOR 1-IN TYPE B HELICAL-SCAN VIDEO TAPE RECORDING ANSI C98.Incandescent Filament Lamp Transformers .2.Now Copyrighted by NEMA.14 DIMENSIONS OF PLASTIC REELS FOR 1/2-INCH (12. Removed at the request of NEMA Withdrawn ANSI C135.4 Power Systems .Constant-Current (Series) Supply Type .1B .1 Inactive 1990.63 Gauges for Electric Lamp Bases and Lampholders . ANSI/NEMA C82.9b-1998.PRECISION LABORATORY POTENTIOMETERS (WITHDRAWN) Inactive ANSI C100.7 MM) VIDEO MAGNETIC TAPE (R 1981) (REVISED AND REDESIGNATED AS ANSI/SMPTE 14-88) Inactive ANSI C98. Removed at the request of NEMA Withdrawn ANSI C82.Requirements .1-1995 Withdrawn ANSI C92.1A .1 Galvanized Steel Bolts and Nuts for Overhead Line Construction . Removed at the request of NEMA Withdrawn American National Standard for High-Intensity Discharge and Low-Pressure Sodium Lamps.1 Galvanized Steel Bolts and Nuts for Overhead Line Construction Inactive ANSI C135.1 Power Systems .5 Reference Ballasts . (REVISED AND REDESIGNATED TO ANSI/UL C101-1992) Inactive ANSI C119.1 DECADE TRANSFORMER DIVIDERS (VOLTAGE TYPE) (WITHDRAWN) Inactive ANSI C100.Specifications . Supplement C82.7 Mercury Lamp Transformers . SUPPLEMENT C82.62 Lampholders for Electric Lamps . CORRECTION .Now copyrighted by NEMA.Now copyrighted by NEMA Withdrawn ANSI C93.2 HIGH .Voltage Ratings (60 Hertz) .1 LEAKAGE CURRENT FOR APPLIANCES.1991. ANSI C82.Now copyrighted by NEMA.Insulation Coordination Withdrawn ANSI C92.1-1997 ANSI C82.1991.Now copyrighted by NEMA.1 Electric Power Systems and Equipment .12-1999.ANSI/NEMA C84.1 DIMENSIONS OF 2-IN VIDEO MAGNETIC RECORDING TAPE Inactive ANSI C98.Method of Measurement of Fluorescent Lamp Balasts . Removed at the request of NEMA Withdrawn BALLASTS FOR HIGH-INTENSITY-DISCHARGE AND LOW-PRESSURE SODIUM LAMPS (MULTIPLE-SUPPLY TYPE).High-Intensity-Discharge and Low-Pressure Sodium Lamps .Now copyrighted by NEMA.4-1992) ANSI C82.Now copyrighted by NEMA.3 Reference Ballasts for Fluorescent Lamps .Copyright is now IEEE Active .4 AC-DC TRANSFER INSTRUMENTS AND CONVERTERS (WITHDRAWN) Inactive ANSI C100.12 Lamp Ballasts . Requirements for .2.1C - ANSI C82.Replacement for Tables 6 and 7 and 5. Removed at the request of NEMA Withdrawn ANSI C82.2 For Lamp Ballasts .Sealed Insulated Underground Connector Systems Rated 600 Volts .Now copyrighted by NEMA.6 STANDARD CELLS (WITHDRAWN) Withdrawn ANSI C101.1 Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT) .SCAN VIDEO TAPE RECORDING (REVISED AND REDESIGNATED AS SMPTE 15M-87) Inactive ANSI C98.Definitions .4 Inactive TO ANSI/ NEMA C82.23M Inactive AS ANSI/SMPTE 23M-86) ANSI C100.Now copyrighted by NEMA. Supplement C82.4A .Power-Line Carrier Line-Tuning Equipment Withdrawn ANSI C97.8 Lamp Transformers . Removed at the request of NEMA Withdrawn Ballasts for Fluorescent Lamps .5 DECADE RESISTIVE VOLTAGE DIVIDERS (DIRECT CURRENT TYPE) (WITHDRAWN) Inactive ANSI C100.Constant-Current (Series) Supply Type .22M DIMENSIONS OF VIDEO CASSETTE FOR 3/4-IN TYPE E HELICAL-SCAN VIDEO TAPE RECORDING (REVISED AND REDESIGNATED AS SMPTE 22M-86) Inactive DIMENSIONS AND LOCATION OF RECORDS AND BASIC ELECTRICAL PARAMETERS FOR 1/2-IN TYPE F HELICAL-SCAN VIDEO TAPE RECORDING (REVISED AND REDESIGNATED ANSI C98.SEPTEMBER 1977 (WITHDRAWN) Inactive ANSI C93.2 PREFERRED VOLTAGE RATINGS FOR ALTERNATING-CURRENT ELECTRICAL SYSTEMS AND EQUIPMENT OPERATING AT VOLTAGES ABOVE 230 KILOVOLTS NOMINAL Inactive ANSI C93.Revised to NEMA C82.First Edition. Removed at the request of NEMA Withdrawn ANSI C81. Ballasts and Transformers .Includes Supplement C82.17M Inactive (REVISED AND REDESIGNATED AS SMPTE 17M-87) ANSI C98.Fluorescent Adapters . IEEE C136-1994.22 Zinc-Coated Ferrous Pole-Top Insulator Pins with Lead Threads for Overhead Line Construction Inactive ANSI C135.Fiber-Reinforced Plastic (FRP) Lighting Poles . Inactive ANSI C135.Series Sockets and Series.EYE ANCHOR RODS AND NUTS FOR OVERHEAD LINE CONSTRUCTION.Zinc-Coated Ferrous Insulator Clevises Inactive ANSI C135.Internal Labeling of Luminaires Withdrawn .Copyright is now IEEE Active ANSI C136.Enclosed Post Top-Mounted Luminaires Withdrawn ANSI C136.Copyright is now IEEE Active Roadway Lighting Equipment .Copyright is now IEEE Active ANSI C135.Guide for Selection .Copyright is now IEEE Active ANSI C135.14 Roadway Lighting Equipment .15 Roadway Lighting .Copyright is now IEEE Active ANSI C135.22 Roadway Lighting Equipment .IEEE C136-1994 Inactive ANSI C136.Copyright is now IEEE Active ANSI C135.Vertical Tenons Used with Post-Top-Mounted Luminaires Inactive ANSI C136.21 Roadway Lighting .18 Roadway Lighting .1 Roadway Lighting . (IEEE C136-1994).30 Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction Inactive ANSI C135.Revised and ANSI C136.Guide for Selection .Vertical Tenons Used with Post-Top-Mounted Luminaires .Copyright is now IEEE Active ANSI C135.33 Galvanized Ferrous Crossarm Gains for Overhead Line Construction .14 Staples with Rolled or Slash Points for Overhead Line Construction Withdrawn ANSI C135.IEEE C136-1994 Withdrawn ANSI C136.Zinc-Coated Ferrous Insulator Clevises .Luminaire Attachments .1 Roadway Lighting .or Vertical-Burning High-Intensity-Discharge Lamps . Inactive ANSI C135.JULY 1980 Inactive ANSI C135.33 Galvanized Ferrous Crossarm Gains for Overhead Line Construction Inactive ANSI C135.5 GALVANIZED FERROUS EYENUTS AND EYELETS FOR OVERHEAD LINE CONSTRUCTION.High-Mast Luminaires for Horizontal.or Vertical-Burning High-Intensity-Discharge Lamps Inactive ANSI C136.3 Roadway Lighting Equipment .10-1996 ANSI C136.Copyright is now IEEE Active ANSI C135.Revised and Redesignated to Draft IEEE C136.20 Roadway Lighting Equipment .Metal Brackets for Wood Poles Withdrawn ANSI C136.35 Zinc-Coated Ferrous Cable Racks and Cable Rack Hooks for Underground Line Construction Inactive ANSI C136.22 Zinc-Coated Ferrous Pole-Top Insulator Pins with Lead Threads for Overhead Line Construction .6 Zinc-Coated Ferrous Crossarm Braces for Overhead Line Construction .3-1995 Withdrawn ANSI C136.Socket Receptacles .20 Roadway Lighting Equipment .4 GALVANIZED FERROUS EYEBOLTS AND NUTS FOR OVERHEAD LINE CONSTRUCTION. CORRECTION .High.Fiber-Reinforced Plastic (FRP) Lighting Poles .Field Identification .IEEE C136-1994 Inactive ANSI C136.Socket Support Assemblies for Metal Heads .Filament Lamps .2 THREADED GALVANIZED FERROUS STRAND .18 Roadway Lighting .Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge Lamps .Locking-Type Photocontrol Devices and Mating Receptacles .9 Roadway Lighting Equipment .Copyright is now IEEE Active ANSI C136.Physical and Electrical Interchangeability and Testing .High-Mast Luminaires for Horizontal. (REVISED AND RESESIGNATED TO ANSI/IEEE C136.31 Zinc-Coated Ferrous Single and Double Upset Spool Insulator Bolts for Overhead Line Construction .IEEE C136-1994). Revised and Redesignated to ANSI/ IEEE C136.IEEE C136-1994 Withdrawn ANSI C136.11-1995) Inactive ANSI C136.20 Line Construction .Mechanical Interchangeability .Filament Lamps .30 Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction .MULTIPLE SOCKETS.4-1995 Withdrawn ANSI C136.17 Galvanized Ferrous Bolt-Type Insulator Pins with Lead Threads for Overhead Line Construction Inactive ANSI C135.21 Roadway Lighting .Intensity-Discharge and Low-Pressure Sodium Lamps in Luminaries .DocumentNumber Title Status ANSI C135.13 Roadway Lighting .9 Roadway Lighting Equipment .Mechanical Interchangeability Inactive ANSI C136.4 Roadway Lighting Equipment .11 ROADWAY LIGHTING EQUIPMENT .Socket Support Assemblies for Metal Heads .6 Zinc-Coated Ferrous Crossarm Braces for Overhead Line Construction Inactive ANSI C135.31 Zinc-Coated Ferrous Single and Double Upset Spool Insulator Bolts for Overhead Line Construction Inactive ANSI C135.16 Roadway Lighting .Copyright is now IEEE Active ANSI C136.Copyright is now IEEE Active ANSI C136.10 Withdrawn Redesignated to IEEE C136.20 Line Construction .Copyright is now IEEE Active ANSI C135.35 Zinc-Coated Ferrous Cable Racks and Cable Rack Hooks for Underground Line Construction . AND SEMITRAILERS OPERATED ON PUBLIC HIGHWAYS (WITHDRAWN) Inactive STATION REQUIREMENTS FOR INSPECTION OF MOTOR VEHICLES.20-1967 Active ANSI INCITS 21 Rectangular Holes in Twelve-Row Punched Cards Active ANSI INCITS 21 Rectangular Holes in Twelve-Row Punched Cards .1 INSPECTION PROCEDURES FOR MOTOR VEHICLES.Data Format for Information Interchange Withdrawn ANSI IICRC S520 Standard and Reference Guide for Professional Mold Remediation .Replaces ANSI X3.31-1988 ANSI INCITS 34 Interchange Rolls of Perforated Tape for Information Interchange .27-1987 Active ANSI INCITS 29 Properties of Unpunched Oiled Paper Perforator Tape .Internal Labeling of Luminaires .4 TRAINING OF MOTOR VEHICLE INSPECTORS FOR PASSENGER CARS AND LIGHT TRUCKS (WITHDRAWN) Inactive ANSI EIMA 99-A Exterior Insulation and Finish Systems (EIFS) Active ANSI I3A IT4. NRZI) . TRAILERS. and Outlaying and Associated Areas of the United States for Information Interchange - ANSI INCITS 38 Active formerly ANSI X3.formerly ANSI X3.DocumentNumber Title Status ANSI C136.30-1997 Active Information Systems . NRZI) . HEAVY TRUCKS.Replaces ANSI X3.21-1967 Inactive ANSI INCITS 22 Information Systems .Intrinsic Function Module for COBOL .File Structure and Labeling of Magnetic Tapes for Information Interchange .Replaces ANSI X3.Programming Language APT: Processor Input Language and System-Neutral CLFILE Active Information Systems .Coded Character Sets . STATION REQUIREMENTS FOR ANSI D7.129 For Photography . AND SEMITRAILERS IN STATIONS OWNED AND OPERATED BY REGULATORY AUTHORITY ANSI D7.1D Inactive SEPTEMBER 1984.Replaces ANSI X3.2 Inactive (WITHDRAWN) INSPECTION OF MOTOR VEHICLES.Specifications for p-Aminophenol Hydrochloride Active ANSI ICPA SS-1 Performance Standard for Solid Surface Materials Active ANSI ICST 1 Information Systems . TRAILERS.Replaces ANSI X3.14-1983 Active ANSI INCITS 17 Character Set for Optical Character Recognition (OCR-A) .Replaces ANSI X3. AND LIGHT TRUCKS (WITHDRAWN) Inactive ANSI D18.Photographic Processing Solutions .Structure for the Identification of the Counties and County Equivalents of the United States and Its Outlying and Associated Areas for ANSI INCITS 31 Active Information Interchange .WHEEL VEHICLES) (WITHDRAWN) Inactive ANSI D15.11-1990 Active ANSI INCITS 14 Information Systems . Supplement B: 1993 Active ANSI INCITS 27 Information Systems . AND TRUCK TRAILERS (WITHDRAWN) Inactive ANSI D18.Replaces ANSI X3.4-1986.1 METHOD OF RECORDING AND MEASURING MOTOR VEHICLE FLEET ACCIDENT EXPERIENCE AND PASSENGER ACCIDENT EXPERIENCE (WITHDRAWN) Inactive ANSI D18.Processing Chemicals .22 Roadway Lighting Equipment .17-1981 Active ANSI INCITS 18 One-Inch Perforated Paper Tape for Information Interchange . AND SEMITRAILERS IN STATIONS APPOINTED AND LICENSED BY REGULATORY AUTHORITY.19-1974 Active ANSI INCITS 20 Take-Up Reels for One-Inch Perforated Tape for Information Interchange . the District of Columbia.36 Photography (Processing) .Fingerprint Identification .MARCH 1986 ANSI D7.Replaces ANSI X3.Programming Language .29-1971 Active ANSI INCITS 30 Information Technology .DECEMBER 1983.Representation of Date for Information Interchange .7-Bit American National Standard Code for Information Interchange (7-Bit ASCII) .Replaces ANSI X3.38-1988 .Data Format for the Interchange of Fingerprint Information .AND THREE .Replaces ANSI X3.DECEMBER 1979.22-1983 Active ANSI INCITS 23 Information Systems . FIPS PUB 1-2 Active ANSI INCITS 11 General Purpose Paper Cards for Information Processing . RECREATIONAL VEHICLES. REVISION 3 - ANSI D6.Codes Identification of the States.3 TRAINING OF AUTOMOBILE BODY REPAIRMEN AND AUTOMOBILE PAINTERS (WITHDRAWN) Inactive ANSI D18.IEEE C136-1994 Inactive ANSI CATALOG ANSI Approved Standards Active ANSI CSL 1 Information Systems .34:1972 Active ANSI INCITS 37 Information Technology . Supplement A: 1989.4 INSPECTION PROCEDURES FOR SCHOOL BUSES (WITHDRAWN) Inactive ANSI D7.Second Edition Active ANSI INCITS 4 Information Sysytems .23-1985.118-1974 Active ANSI INCITS 19 Eleven-Sixteenths Inch Perforated Paper Tape for Information Interchange .Replaces ANSI X3.2 TRAINING OF AUTOMOTIVE MECHANICS FOR BUSES.Recorded Magnetic Tape for Information Interchange (200 CPI.Replaces ANSI X3. REVISION 2 .pH Calibration and Measurement Withdrawn ANSI I3A IT4.1 TRAINING OF AUTOMOTIVE MECHANICS FOR PASSENGER CARS.5 INSPECTION REQUIREMENTS FOR MOTORCYCLES (TWO . TRAILERS.Revision of ANSI/NBS-ICST 1-1986 Withdrawn MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES FOR STREETS AND HIGHWAYS.Replaces ANSI X3.Codes . REVISION 4 .3 Inactive (WITHDRAWN) ANSI D7. REVISION 1 .Replaces ANSI X3.Recorded Magnetic Tape for Information Interchange (800 CPI. Replaces X3.Replaces ANSI X3.ANSI Sponsorship Procedures .Replaces ANSI X3.39-1986 Active ANSI INCITS 40 Information Systems .61-1986 Active ANSI INCITS 62 Information Technology .Data Encryption Algorithm .Replaces ANSI X3.30 mm).250 Inch (6.formerly ANSI X3.89-1981 Active ANSI INCITS 91M Information Systems .Codes .30 mm).Unrecorded Magnetic Tape Minicassette for Information Interchange.62 Active ANSI INCITS 72 Parallel Recorded Magnetic Tape Cartridge for Information Interchange.Storage Module Interfaces . Physical.formerly ANSI X3.93M Active ANSI INCITS 94 Information Systems . Physical.Replaces X3.(6250 CPI. PE.Replaces X3.formerly ANSI X3.92-1981 Withdrawn ANSI INCITS 93M Optical Character Recognition (OCR) Character Positioning .Formerly ANSI X3. Primary County Divisions.Replaces X3.86 Active ANSI INCITS 88 Computer Program Abstracts . Physical. and Magnetic Requirements .Replaces X3.53-1976 Active ANSI INCITS 54 Information Systems .103-1983 Active ANSI INCITS 105 Information Systems .May 24.150 in) .Replaces ANSI X3.85-1981 Active ANSI INCITS 86 Optical Character Recognition (OCR) Inks .74 Active ANSI INCITS 76 Unformatted Single-Disk Cartridge (Top Loading.91M-1987 Withdrawn ANSI INCITS 92 Data Encryption Algorithm . General.Guidelines for OCR Print Quality .83 Active ANSI INCITS 85 1/2-Inch Magnetic Tape Interchange Using a Self-Loading Cartridge .ISO 6160: 1979 Inactive ANSI INCITS 53 Programming Language PL/I .56-1986 ANSI INCITS 58 Unrecorded Eleven-Disk Pack .formerly ANSI X3. Coplanar 3.DocumentNumber Title Status ANSI INCITS 39 Information Systems .Replaces X3. Supplement A 1991 ANSI INCITS 103 Information Systems . and Other Locational Entities ANSI INCITS 47 Withdrawn of the United States and its Outlaying and Associated Areas for Information Interchange ANSI INCITS 48 Information Systems .55- ANSI INCITS 55 Active 1992 Information Systems . 1600 bpi (63 bpmm). Phase Encoded) .Programming Language .Unrecorded Magnetic Tape Cartridge for Information Interchange . General. FIPS PUB 90 Active Information Systems . Group-Coded Recording) .Replaces X3.Replaces X3.ISO Registration According to ISO 2375 .48-1986 Active ANSI INCITS 49 Character Set for Optical Charater Recognition (OCR-B) .49-1975.formerly ANSI X3.96-1983 Active ANSI INCITS 99 Information Systems .Unrecorded Magnetic Tape for Information Interchange (9-Track 800 CPI.40-1993 Active ANSI INCITS 42 Representation of Numeric Values in Character Strings for Information Interchange Withdrawn ANSI INCITS 45 Information Systems .formerly ANSI X3.Interface between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) for Operation with Packet-Switched Data ANSI INCITS 100 Active Networks (PSDN).4 Track. 4 Track.0. 200 tpi). 1600 bpi (63 bpmm). Customary.Representation of Geographic Point Locations for Information Interchange .Formerly ANSI X3.Replaces ANSI X3. 0. and Magnetic Requirements) .Amendment 1 .52-1976. 2200 bpi.Optical Character Recognition (OCR) .formerly ANSI X3.88 Withdrawn ANSI INCITS 89 Unrecorded Single-Disk. SI. 200 tpi.Replaces X3.94-1985 Active ANSI INCITS 96 Information Systems .Recorded Magnetic Tape for Information Interchange .formerly ANSI X3.Optical Character Recognition (OCR). Department of Defense Active ANSI X3. and Magnetic Requirements . and Other Units to be Used in SYstems with Limited Character Sets . Replaces X3. FIPS PUB 33-1 Active ANSI INCITS 46 Unrecorded Magnetic Six-Disk Pack (General.General. General.Representations for U.Paper Sizes .formerly ANSI X3. Phase Encoded .PANCM .53 Programming Language PL/I . NRZI.Replaces X3. by Dedicated Circuit . 1600 bpi (63 bpmm).81 mm (0.250 Inch (6.58-1977 Active ANSI INCITS 61 Information Systems .54-1986 Active Information Systems . Phase Encoded . 2200 BPI).Replaces X3.Magnetic Tape Cassettes for Information Interchange . or between Two DTEs. and Magnetic Requirements . Physical.Paper Used in OCR Systems .76-1981 Active ANSI INCITS 82 One-Sided Single-Density Unformatted 5. FIPS PUB 32 Active ANSI INCITS 50 Information Systems .Replaces X3.46-1974 Active Information Systems . Phase Encoded . Double-Density Cartridge (Front Loading. Physical.Continuous Business Forms (Single-Part) . GCR) .99-1983.Data Link Encryption Withdrawn ANSI INCITS 106 Information Systems .100-1989. 0.Replaces ANSI INCITS 56 Active X3.3. 1600 CPI.Recorded Magnetic Tape for Information Interchange (1600 CPI.Programming Language .30 mm).50-1986 Withdrawn ANSI INCITS 52 Unrecorded Single-Disk Cartidge (Front Loading.Recorded Magnetic Tape Cartridge for Information Interchange .formerly ANSI X3. and 6250 CPI.S.81 -mm (0.Character Set for Handprinting .150-in) Tape at 32 bpmm (800 bpi).250 Inch (6. and Magnetic Requirements .25-Inch Flexible Disk Cartridge (for 3979-BPR Use) Active ANSI INCITS 83 Information Technology .Modes of Operation Withdrawn . 4400 bpi). 1999.72-1981 Active ANSI INCITS 73 Single-Sided Unformatted Flexible Disk Cartridge (for 6631-BPR Use) Active ANSI INCITS 74 Information Systems .45-1982. Phase Encoded .Structure and Data Requirements for the Idenification of Named Populated Places.PL/I General-Purpose Subset . Programming Language .Character and Line Spacing .Computer Graphics .American National Standard Dictionary of Information Technology (ANSDIT) Active .25-inch (130-mm).124.Graphical Kernel System (GKS) Ada Binding .Replaces ANSI X3.Replaces ANSI X3.General.3-tpmm (135-tpi).150-1987 Active ANSI INCITS 151 Office Machines and Supplies .Token Ring Physical Layer Protocol (PHY) .4-Track.Graphical Kernel System (GKS) Pascal Binding .157-1987 Active Information Systems .Alphanumeric Machines .Replaces ANSI X3. Physical. Amendment 1: 1999 ANSI INCITS 139 Information Systems .250 Inch (6.Computer Graphics .8-tpmm).Recorded Magnetic Tape Cassette for Information Interchange . Double-Density. 96-tpi (3.139-1987 Active ANSI INCITS 145 Information Systems .1989 Active Information Systems . 5.Contact Start-Stop Storage Disk .Replaces ANSI X3.25-Inch (130-mm). Unformatted.3-1989 Active Information Systems .Replaces ANSI X3.Replaces ANSI X3.Specification .Serial Recorded Magnetic Tape Cartridge for Information Interchange .136-1986 Information Technology .81 mm (0.General.25-Inch (130-mm).268-in (210-mm) Outer Diameter and 3.8 tpmm).Replaces ANSI X3.Printable/Image Areas .Replaces ANSI X3.3-tpmm (135-tpi).115- ANSI INCITS 115 Active 1984 Information Systems .119-1984 Information Systems .Replaces ANSI X3.Replaces ANSI X3.Token Ring Media Access Control (MAC) . 96-tpi (3.Noncarbonized.Includes ANSI INCITS 124.575-in) Inner ANSI INCITS 163 Active Diameter .Codes .Graphical Kernel System (GKS) FORTRAN Binding .Full BASIC . Physical and ANSI INCITS 137 Active Magnetic Requirements .151-1987 Active ANSI INCITS 154 Office Machines and Supplies .Fiber Distributed Data Interface (FDDI) . High-Density.Recorded Magnetic Tape Cartridge for Information Interchange .112-1984 ANSI INCITS 113 Information Systems .Replaces ANSI X3.2-1988 Active ANSI INCITS 124.Unrecorded Magnetic Tape Cassette for Information Interchange.135.Replaces ANSI X3.5-mm) Inner Diameter - ANSI INCITS 120 Active Replaces ANSI X3. 6400 bpi (252 bpmm). 394 ftpmm (10 000 ftpi) .Two-Sided. Unformatted.120-1984 Information Systems .DIBOL .Replaces ANSI X3.171-1989 ANSI INCITS 172 Information Technology .Identification of Hydrologic Units .158-1987 Information Systems – Two-Sided.Token Ring Physical Layer Medium Dependent (PMD) .165-1992 Active ANSI INCITS 166 Information Systems .Replaces ANSI X3.General.Character and Line Spacing .Programming Languages . ANSI INCITS 126 Active Physical.1-1985.Replaces ANSI X3.Part 10: Object Language Bindings (SQL/OLB) .Replaces ANSI X3.Graphical Kernel System (GKS) Functional Description .Unformatted 80-Megabyte Trident Pack for Use at 370 tpi and 6000 bpi .SQL .30 mm).9-tpmm).and Two-Sided. Includes Technical Corrigendum 1: 1995(R2000) Information Systems .Replaces ANSI X3.Location of Imprinted Information .937-in (100-mm) Inner Diameter - ANSI INCITS 119 Active Replaces ANSI X3. 0.151-1987 Active ANSI INCITS 152 Office Machines and Supplies .164-1990 ANSI INCITS 165 Information Systems . ANSI INCITS 162 Active and Magnetic Requirements . 0.Computer Graphics .General.125-1985 Information Systems .149-186 Active ANSI INCITS 150 Office Machines and Supplies .General. Replaces ANSI X3. and Magnetic Requirements . and ANSI INCITS 125 Active Magnetic Requirements . Unformatted.111-1986 Active Information Systems .163-1988 Information Systems . Double-Density. Unformatted. Serial.Replaces ANSI X3. 90-mm (3. 8000 bpi (315 bpmm). 90-mm (3. 48-tpi. Double-Density. Inverted Modified ANSI INCITS 116 Active Frequency Modulation Encoded . Group Code Recording . Disk Cartridge .874-in (200-mm) Outer Diameter and 2.124-1985 Active ANSI INCITS 124. and Business Forms .124.124.95 840 Flux Transitions per Track 7.30 mm).158 361 Flux Transitions per Track 8.5 in).Optical Character Recognition (OCR) .Fibre Data Distributed Interface (FDDI) . 5.Replaces ANSI X3. Flexible Disk Cartridge for 7958 bpr Use .DocumentNumber Title Status ANSI INCITS 111 Information Systems .One. Supplement A . 48-tpi (1.Contact Start-Stop Metallic Film Storage Disk .Replaces ANSI X3. Data Processing Equipment.162-1988(R1999).Keyboard Arrangement .2 Information Systems . and Magnetic Requirements for 13 ANSI INCITS 121 Active 262 ftpr Two-Headed Application . Flexible Disk Cartridge for 13 262 ftpr Use – General. Phase Encoded .Database Languages .154-1988 Active ANSI INCITS 157 Information Systems . and Business Forms .148-1988 Active ANSI INCITS 149 Financial Services .145-1986 Active ANSI INCITS 148 Information Systems . Flexible Disk Cartridge for 7958 bpr Use .General.Contact Start-Stop Storage Disk .Replaces ANSI X3.Fiber Distributed Data Interface (FDDI) . Physical.Computer Graphics .One.500-in (63.126-1986 ANSI INCITS 131 Information Systems .Replaces ANSI X3.and Two-Sided. High-Density.Replaces ANSI X3.4 and 9 Track.Replaces ANSI X3.166:1900 Active Information Systems .or Two-Sided.Replaces ANSI X3.118-1984(R1990) Active Information Systems .83 333 Flux Transitions Per Track 130-mm (5.3 Information Systems .118-in) Outer Diameter and 40-mm (1. 5.Small Computer System Interface-2 Active ANSI INCITS 135 Information Technology .General.Replaces ANSI X3. Flexible Disk Cartridge for 15 916 bpr Use .10-1998 Withdrawn Information Systems . ANSI INCITS 112 Active and Magnetic Requirements . 5.PIN Pad . Data Processing Equipment. and Magnetic Requirements .Magnetic Storage Disks with 14-Inch (356-mm) Diameter and Low Surface Friction (160 000 Flux Transitions per Track.Two-Sided. 0.Replaces ANSI X3. Single-Ply Adding Machine Paper Rolls .1 Information Systems .Recorded Magnetic Tape for Information Interchange 3200 cpi (126 cpmm).Matrix Character Sets for OCR-MA . Flexible.81 mm). Group Code Recording - ANSI INCITS 158 Active Replaces ANSI X3.5-in) 5.135-1992 Active ANSI INCITS 135.150 in) Tape.116-1986 ANSI INCITS 117 Information Systems .Physical and Magnetic ANSI INCITS 164 Active Interchangeability Requirements .4 Track.Replaces ANSI X3.250 Inch (6. 3.139-1988.Replaces ANSI X3. 8000 bpi (315 bpmm) Streaming ANSI INCITS 136 Active Mode.1-1985 Active ANSI INCITS 124.Text and Facsimile Communication Equipment . ANSI INCITS 171 Active and Magnetic Requirements . 8-Inch (200-mm). Unformatted. Physical. Physical. Physical. Unformatted.113-1987.117-1984 Active ANSI INCITS 118 Personal Identification Number .150 inch (3.Replaces ANSI X3.Financial Transaction Card Formsets . 480 tpi) .10 Information Technology .121-1984 ANSI INCITS 124 Information Systems .Business Machines.Replaces ANSI X3.One.Database Language SQL . Flexible Disk Cartridge for 7958 bpr Use .Business Machines. Physical.Replaces ANSI X3. 20-Track.Replaces ANSI X3.Replaces ANSI X3.Mechanical. 10 000-12 500 ftpi (394-492 ftpmm) Coercivity 550 ANSI INCITS 235 Active Oersteds (44 000 Amperes/Meter) (Types 6150. 6525.183-1991 Active ANSI INCITS 184 Information Systems .222-1997 Active Information Technology .250 in (6.35 mm).Replaces ANSI NCITS 210-1998 Active ANSI INCITS 211 Information Systems .198-1992 Withdrawn ANSI INCITS 199 Information Systems .Unrecorded Magnetic Tape Cartridge for Information Interchange .Replaces ANSI X3. 10 000-14 700 ftpi (394-579 ftpmm) Coercivity 550 ANSI INCITS 249 Active Oersteds (44 000 Amperes/Meter) (Types 2000.Recorded Magnetic Tape Mini-Cartridge for Information Interchange .83 333 Flux Transitions per Track 9.Recorded Magnetic Tape for Longitudinal Recording of Instrumentation Data .DocumentNumber Title Status ANSI INCITS 175 Information Technology . 2060.0.Unrecorded Magnetic Tape and Cartridge for Information Interchange .130-mm Rewritable Optical Disk Data Storage Cartridges with Continuous Composite Servo (CCS) - ANSI INCITS 234 Active Replaces ANSI X3.150-in) Digital Data Storage (DDS) Recorded Format) - ANSI INCITS 203 Active Replaces ANSI X3. and Signalling Protocol Specification (HIPPI-PH) .199-1991 Active Information Systems .214-1992 Active Information Systems .Replaces ANSI X3. 2120) .130 mm Write-Once Sampled-Servo RZ Selectable-Pitch Optical Disk Cartridge - ANSI INCITS 191 Withdrawn Replaces ANSI X3.Alphanumeric Machines . 10 000 bpi (394 bpmm) and 28- ANSI INCITS 227 Active Track.65 mm).Replaces ANSI X3.5-mm (3.Guideline .Replaces ANSI X3.Contact Start-Stop Metallic Thin-Film Storage Disk .Digital Information Interchange 130-mm Optical Disk Cartridges of the Write-Once.Replaces ANSI X3. 0.Replaces ANSI ANSI INCITS 248 Active X3. 6250.Transfer Syntax Description Notation (TSDN) Withdrawn ANSI INCITS 209 Information Systems .Supplement to Packet-Switched Signaling System between Public Networks Providing Data Transmission Services (NUI Utility Extensions and ANSI INCITS 178 Active Format Constraints) .Recorded Magnetic Tape for Information Interchange 1.197-1991 ANSI INCITS 198 Programming Language .Fiber Distributed Data Interface (FDDI) .356-mm WORM Optical Disc Cartridge (Parts 1 and 2) .Replaces ANSI X3.7 Encoding and LDC .Interchange .Extended .Bar Code Print Quality .Replaces ANSI X3.Physical Layer Protocol (PHY-2) .356-mm Optical Disk Cartridge (Write-Once) .Test Methods for Media Characteristics .25 Network Interworking Withdrawn Information Technology . Group ANSI INCITS 204 Active Code Recording .203-1992 Information Systems .179-1990 ANSI INCITS 182 Information Systems .251:1995 .Replaces ANSI X3.Recorded Optical Media Unit for Digital Information Interchange .High-Performance Parallel Interface .Helical-Scan Digital Computer Tape Cartridge for Information Interchange (3.204-1992 Information Systems . 6080.Fiber-Distributed Data Interface (FDDI) Single-Mode Fiber Physical Layer Medium Dependant (SMF-PMD) .25 in (6.Replaces ANSI X3.High-Performance Parallel Interface .Replaces ANSI X3.184-1993 Active ANSI INCITS 186 Information Systems .740-in) Outer Diameter and 25-mm (0.81-mm (0.Replaces ANSI X3.Supplement A: 1991.220-1992 ANSI INCITS 222 Information Technology .Replaces ANSI X3.81-mm (0.130-mm Write-Once Optical Disk Cartridge Using Sampled Servo and 4/15 Encoding .235-1995 ANSI INCITS 240 Information Technology .187-1990 ANSI X3. Amendment 2: 1999 Active ANSI INCITS 231 Information Systems . Serial Serpentine.130-mm Rewritable Optical Disk Cartridge for Information Interchange .212-1992 Active ANSI INCITS 214 Information Systems .Optical Character Recognition (OCR) . Amendment 1: 1996 (R2001).Replaces ANSI X3.249:1995 Information Technology . MFM Encoded .250-inch (6.35 mm). 10000 ftpi (394 ftpmm) .Serial. for Information Interchange (3. Replaces ANSI X3. Using the Magneto. 22-Track.Replaces ANSI X3.81-mm (0.186-1992 Active ANSI INCITS 187 Information Systems .Fibre Distributed Data Interface (FDDI) . 0.Matrix Character Sets for OCR-MB .Unrecorded Optical Media Unit for Digital Information Interchange .Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (PHY ATS) .150-in) Data/DAT Recorded Format) .0.187-1990 Active Information Systems . Read Multiple (WORM) Type.182-1990 Active ANSI INCITS 183 Information Systems .130-mm Write-Once Optical Disk Cartridge Using Continuous Servo RLL 2.35-mm) 10 000 bpi (394 bpmm) Streaming Mode.25 in (6.150-in) Data/DAT-DC Recorded Format) Withdrawn Information Systems .Replaces ANSI X3.190 Information Technology .Helical-Scan Digital Computer Tape Cartridge for Information Interchange (3.19-mm Type ID-1 Recorded Instrumentation . 6 667 ftpi (262 ftpmm) ANSI INCITS 197 Active and 48-Track.25 Data Transfer Phase (DTP) Procedures for Operation with Frame Relay .27-mm (0.234-1993 Information Technology .Replaces ANSI X3.Fiber Distributed Data Interface (FDDI) . 6081) .Replaces ANSI X3.Text and Office Systems . 6037) .Replaces ANSI X3.191-1991 Information Systems .050-in) Thickness .0.Replaces ANSI X3.Replaces ANSI X3.207-1991 Active ANSI INCITS 208 Information Technology .35 mm).Domestic Public/Private X.5 and 18 Track.230-1994.200- ANSI INCITS 200 Withdrawn 1992 Information Systems .Interface between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) for Terminals Operating in the Packet Mode and ANSI INCITS 189 Active Accessing a Packet-Switched Public Data Network Through Switched Access .227-1996 ANSI INCITS 228 Information Systems . Electrical.Fibre Channel .Conformance Testing for Standard Generalized Markup Language (SGML) Systems Inactive Information Systems .Digital Cassette Tape Format Active Information Systems .Alternate Keyboard Arrangement .Hybrid Ring Control (HRC) .211-1992 Withdrawn ANSI INCITS 212 Information Systems .Replaces ANSI X3.Fortran .Unrecorded Magnetic Tape Cartridge for Information Interchange .209-1992 Active ANSI INCITS 210 Information Systems .Replaces ANSI X3.205- ANSI INCITS 205 Active 1992 ANSI INCITS 207 Office Machines and Supplies .231-1994 Active ANSI INCITS 233 Information Systems .Framing Protocol (HIPPI-FP) .228-1993 Active ANSI INCITS 230 Information Technology .High-Performance Parallel Interface . 14 700 bpi (579 bpmm).Helical-Scan Digital Computer Tape Cartridge.Test Methods for Media Characteristics .248-1996 Information Technology . 2080.25 in (6.Optical ANSI INCITS 220 Active Effect .X.Unrecorded Magnetic Tape Mini-Cartridge for Information Interchange .Physical and Signaling Interface (FC-PH) .1/2 inch (12.Physical Switch Control (HIPPI-SC) .Replaces ANSI X3.984-in) ANSI INCITS 179 Active Inner Diameter and 1.35 mm).Replaces ANSI X3. 20 000 ftpi (787 ftpmm) Coercivity 550 Oersteds (44 000 ANSI INCITS 251 Active Amperes/Meter) (Types 6320.178 Information Systems .Replaces ANSI X3. DocumentNumber Title Status ANSI INCITS 253 Information Technology .286-1997 Active ANSI INCITS 287 Information Technology .Fabric Generic Requirements (FC-FG) .SCSI-3 Interlocked Protocol (SIP) Withdrawn ANSI INCITS 293 Information Technology .Replaces ANSI X3.Fibre Channel .SCSI-2 Protocol (SSA-S2P) .Fibre Channel . 128-Track.295-1996 Active ANSI INCITS 296 Information Technology .Fibre Distributed Data Interface (FDDI) .Serial Storage Architecture .Physical and Signalling Interface-2 (FC-PH-2) .Fibre Channel .293-1996 Active ANSI INCITS 294 Information Technology .Replaces ANSI X3.65 mm).Replaces ANSI X3.289-1996 Active ANSI INCITS 290 Information Technology .278-1997 Active ANSI INCITS 279 Information Technology .Data Compression Algorithm .Serial Storage Architecture .297-1997 Withdrawn .SCSI-3 Controller Commands (SCC) Withdrawn ANSI INCITS 277 Information Technology .Transport Layer 1 (SSA-TL1) .258-1997 Active ANSI INCITS 259 Information Technology .Replaces ANSI X3.272-1996 Withdrawn ANSI INCITS 273 Information Technology .Fibre Distributed Data Interface (FDDI) .Serial Storage Architecture .Station Management-2 .Replaces ANSI X3.294-1996 Active ANSI INCITS 295 Information Technology .Replaces ANSI X3.Programming Language REXX .280-1996 Active Information Technology .Encapsulation of Frames of the Fibre Channel Physical and Signaling Interface (FC-PH Encapsulation) ANSI INCITS 283 Withdrawn (HIPPI-FC) .290-1997 Withdrawn ANSI INCITS 291 Information Technology .Single-Byte Command Code Sets Connection (SBCON) Architecture .Health Care Identification Cards Active ANSI INCITS 285 Information Technology Metamodel for the Management of Shareable Data .264-1996 Active ANSI INCITS 268 Information Technology .Station Management-2 Common Services (SMT-2-CS) .263:1995 Active ANSI INCITS 264 Information Technology .Replaces ANSI X3.Fibre Channel .270-1996 Active ANSI INCITS 271 Information Technology .Amendment 1 .Replaces ANSI X3.Fault Isolation .Fibre Distributed Data Interface (FDDI) .291-1997 Withdrawn ANSI INCITS 292 Information Technology .274-1996.Replaces ANSI X3.Mapping to HIPPI-FP (FC-FP) .Physical Layer Repeater Protocol (PHY-REP) .254-1994 Active ANSI INCITS 256 Information Technology .Replaces ANSI X3.Replaces ANSI X3.Link Encapsulation (FC-LE) Withdrawn ANSI INCITS 288 Information Technology .748 in) Type D-1 .Replaces ANSI X3.Replaces ANSI X3. 62 500 bpi (2 460 bpmm) DLT3 Format - ANSI INCITS 282 Active Replaces ANSI X3.Replaces ANSI X3.Replaces ANSI INCITS 262 Active ANSI X3.Replaces ANSI X3.Arbitrated Loop (FC-AL) .Identification Cards .SCSI-3 Architecture Model .Token Ring Twisted Pair Physical Layer Medium Dependent (TP-PMD) .2 (FC-GS-2) .Information Characterization Withdrawn ANSI INCITS 276 Information Technology .262:1995 ANSI INCITS 263 Information Technology .Magnetic Tape Cartridge for Information Interchange 0.Replaces ANSI X3.Replaces ANSI X3.257-1997 Active ANSI INCITS 258 Information Technology .Packet Services (SMT-2-PS) .283-1996 ANSI INCITS 284 Information Technology .Fibre Channel .Fibre Distributed Data Interface (FDDI) .Device Generic Command Set for Magnetic and Optical Disk Drives . Serial Serpentine.259-1997 Active Information Technology Fiber Distributed Data Interface (FDDI) .Intelligent Peripheral Interface .Adaptive Lossless Data Compression (ALDC) Algorithm for Information Interchange .Conformance Test Protocol Implementation Conformance Statement Proforma (CT-PICS) .Fibre Channel .SCSI-3 Parallel Interface .CASE Tool Integration Messages .Replaces ANSI X3.Unrecorded Helical-Scan Digital Computer Tape Cassette for Information Interchange 19 mm (0.Replaces ANSI X3.Generic Services .Fibre Distributed Data Interface (FDDI) .AT Attachment Interface with Extensions (ATA-2) Withdrawn ANSI INCITS 280 Information Technology . Amendment 1: 2000 Active ANSI INCITS 275 Information Technology .50 in (12.1998 Withdrawn ANSI INCITS 254 Information Technology .SCSI-3 Serial Bus Protocol (SBP) Withdrawn ANSI INCITS 269 Information Technology Fibre Channel Protocol for SCSI .Station Management-2 -Isochronous Services (SMT-2-IS) .Abstract Test Suite for FDDI Station Management Conformance Testing (FDDI SMT ATS) .296-1997 Active ANSI INCITS 297 Information Technology .Physical Layer 1 (SSA-PH1) .Fibre Channel .Single-Byte Command Code Sets Mapping Protocol (FC-SB) Withdrawn ANSI INCITS 272 Information Technology .Radio Frequency Identification (RFID) Active ANSI INCITS 257 Information Technology .Replaces ANSI NCITS 288-1999 Active ANSI INCITS 289 Information Technology .Replaces ANSI X3.273-1997 Active ANSI INCITS 274 Information Technology .SCSI-3 Fast-20 Withdrawn ANSI INCITS 278 Information Technology .Replaces ANSI X3.Replaces ANSI X3.Replaces ANSI X3.Replaces ANSI X3.High-Performance Parallel Interface .269-1996 Active ANSI INCITS 270 Information Technology .282-1996 Information Technology .285-1998 Withdrawn ANSI INCITS 286 Information Technology . 303-1998 Active ANSI INCITS 304 Information Technology .1394 to AT Attachment .Low-Cost 10-km Optical 1063-MBaud Interface (100-SM-LC-L) .Replaces ANSI X3.Unrecorded.Replaces ANSI X3.Magnetic Tape Cartridge for Information Interchange 0.SCSI-3 Enclosure Services (SES) Command Set .2 (MMC-2) .50 in (12. Serial Serpentine 128-Track.Replaces ANSI NCITS 305-1998.Serial Bus Protocol 2 (SBP-2) .Replaces ANSI NCITS 325-1998 Active ANSI INCITS 326 Information Technology . Parallel Serpentine 12.High-Performance Parallel Interface .Part 2: SQL Types Using the Java TM Programming Language .AT Attachment with Packet Interface Extension .6400 Mbit/s Physical Layer (HIPPI-6400-PH) .326-1999 Withdrawn ANSI INCITS 328 Information Technology .SCSI-3 Primary Commands (SPC) .SQLJ . 3400 bpmm (86 360 bpi) Run Length ANSI INCITS 311 Active Limited Recording ANSI INCITS 312 Information Technology .Serial Storage Architecture .Replaces ANSI NCITS 309-1997 Active ANSI INCITS 310 Information Technology .301-1997 Withdrawn ANSI INCITS 302 Information Technology .Replaces ANSI X3.SCSI-3 Multimedia Commands .Programming Languages .Replaces ANSI NCITS 330-2000.Database Languages .Physical Layer 2 (SSA-PH2) .Replaces ANSI NCITS 319-1998 Active ANSI INCITS 320 Information Technology .2-2000 Withdrawn ANSI INCITS 332 AMD 2 Information Technology – Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 2 Active ANSI INCITS 332 AMD 1 Information Technology .Serial Specification (HIPPI-Serial) .Fibre Channel Switch Fabric (FC-SW) .Replaces ANSI NCITS 318-1998 Active ANSI INCITS 319 Information Technology .2 Information Technology . 208-Track.Representation of Time for Information Interchange Active Information Technology .AT Attachment-3 Interface (ATA-3) .65 mm). Serial Serpentine.Serial Storage Architecture .SCSI Multimedia Commands .65 mm (1/2 in).Mapping to Asynchronous Transfer Mode (HIPPI-ATM) .Replaces ANSI NCITS 321-1998 Withdrawn ANSI INCITS 322 Information Technology .SCSI-3 Protocol (SSA-S3P) .Replaces ANSI X3.Replaces ANSI NCITS 334-2000 .65 mm).Database Languages . 2550 ftpmm (64 770 ANSI INCITS 315 Active ftpi) ANSI INCITS 316 Information Technology .DocumentNumber Title Status ANSI INCITS 298 Information Technology .SQLJ .(ATA/ATAPI-4) Active ANSI INCITS 318 Information Technology .Spatial Data Transfer Standard (SDTS) . Parallel Serpentine.Transport Layer 2 (SSA-TL2) .50 in (12.Replaces ANSI NCITS 320-1998 Active ANSI INCITS 321 Information Technology .Replaces ANSI X3.299-1997 Withdrawn ANSI INCITS 300 Information Technology .Replaces ANSI X3. Amendment 1 November 6.50 in (12.SCSI-3 Medium Changer Commands (SMC) .Replaces ANSI X3.Magnetic Tape and Cartridge for Information Interchange .Replaces ANSI X3.Replaces ANSI NCITS 331.Replaces ANSI X3.Replaces NCITS 331. 62 500 bpi (2 460 bpmm) DLT 3-XT ANSI INCITS 334 Active Format .Tailgate . Amendment 1: 2000 Active ANSI INCITS 306 Information Technology .302-1998 Active ANSI INCITS 303 Information Technology . 2003 Active ANSI INCITS 331.1-1999 Withdrawn ANSI INCITS 331.Replaces ANSI NCITS 307-1997 Active ANSI INCITS 308 Information Technology . Amendment 1:2001 Active ANSI INCITS 324 Information Technology .High-Performance Parallel Interface .Magnetic Tape Cartridge for Information Interchange 0. 81 600 bpi (3212 bpmm) DTL4 Format Active ANSI INCITS 314 Information Technology . 128-Track.300-1997 Active ANSI INCITS 301 Information Technology .Fibre Channel Arbitrated Loop (FC-AL-2) Active ANSI INCITS 333 Information Technology .1 Information Technology .Replaces ANSI NCITS 314-1998 Active Information Technology .Replaces ANSI NCITS 323-1998.19 mm DD-2 Helical Scan Digital Computer Tape Cassette for Information Interchange .Part 1: SQL Routines Using the Java Programming Language .Smalltalk .298-1997 Withdrawn ANSI INCITS 299 Information Technology .Replaces ANSI NCITS 308-1997 Active ANSI INCITS 309 Information Technology .Magnetic Tape Cartridge for Information Interchange.Reduced Block Commands (RBC) .Replaces ANSI NCITS 333-2000 Active Information Technology .304-1997 Withdrawn ANSI INCITS 305 Information Technology . 85 938 bpi (3383 bpmm) DLT5 Format - ANSI INCITS 329 Active Replaces NCITS 329-2000 ANSI INCITS 330 Information Technology .65 mm).SCSI Controller Commands-2 (SCC-2) . Serial Serpentine. 128-Track.High Performance Parallel Interface .SCSI-3 Block Commands (SBC) .High-Performance Parallel Interface .Fibre Channel .6400 Mbit/s Physical Switch Control (HIPPI-6400-SC) .Magnetic Tape Format for Information Interchange 128-Track.Serial Storage Architecture .65 mm (1/2 in).Fibre Channel Physical and Signalling Interface-3 (FC-PH-3) .Card Durability Test Methods Active ANSI INCITS 323 Information Technology . 12.Replaces ANSI NCITS 316-1998 Withdrawn ANSI INCITS 317 Information Technology .Replaces ANSI NCITS 306-1998 Active ANSI INCITS 307 Information Technology . 0.Replaces ANSI NCITS 324-1999 Withdrawn ANSI INCITS 325 Information Technology .Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 1 Active ANSI INCITS 332 Information Technology .SCSI Parallel Interface-2 (SPI-2) .328-2000 Active Information Technology . Fibre Channel .2 (SAM-2) Active ANSI INCITS 367 Information Technology .10 Gigabit (10GFC) Active ANSI INCITS 364 Information Technology . 208-Track.Replaces ANSI NCITS 344-2001 Active Information Technology .Fibre Channel .Replaces ANSI NCITS 342-2001 Withdrawn ANSI INCITS 343 Information Technology .BIOS Enhanced Disk Drive Servies -2 Withdrawn ANSI INCITS 364 AMD 1 Information Technology . Second Version (FCP-2) Active ANSI INCITS 351 Information Technology .Replaces ANSI NCITS 349-2001 Withdrawn ANSI INCITS 350 Information Technology .Common Industry Format for Usability Test Reports .Generic Services .Replaces ANSI NCITS 336-2000 Active ANSI INCITS 337 Information Technology .Adapter) Active .BIOS Enhanced Disk Drive Services .SCSI Signal Modeling-2 (SSM-2) Active ANSI INCITS 370 AMD 1 Information Technology – ATA/ATAPI Host Adapters (ATA .3 (MMC-3) .Scheduled Transfer .Replaces ANSI NCITS 346-2001 Active ANSI INCITS 347 Information Technology .Reliable Transport Profile (ST-RTP) .ITI Active ANSI INCITS 362 SCSI Parallel Interface-4 (SPI-4) Withdrawn ANSI INCITS 363 Information Technology .SCSI Parallel Interface-5 (SPI-5) Active ANSI INCITS 368 Information Technology . Serial Serpentine.Fibre Channel .5 (ATA/ATAPI-5) .Very Long Length Optical Interface (SM-LL-V) .AT Attachment with Packet Interface .SCSI-3 Stream Commands (SSC) .65 mm for Recorded Instrumentation Digital Cassette Tape Format .SCSI Primary Commands .Replaces ANSI NCITS 343-2001 Withdrawn ANSI INCITS 344 Information Technology . 0.Fibre Channel .The BioAPI Specification Active ANSI INCITS 359 for Information Technology .Fibre Channel .Virtual Interface Architecture Mapping Protocol (FC-VI) Active ANSI INCITS 358 AMD 1 Information Technology – BioAPI Specification – Amendment 1: Support for Biometric Fusion Active ANSI INCITS 358 Information Technology .4 mm (1 in) Type DCRsi Recorded Instrumentation .formerly ANSI NCITS 351-2001 Active ANSI INCITS 352 Information Technology Fibre Channel Physical Interfaces (FC-PI) Withdrawn ANSI INCITS 354 Information Technology .Role Based Access Control Active ANSI INCITS 360 Information Technology .formerly ANSI NCITS 355-2001 Active ANSI INCITS 356 Fibre Channel Audio Video (FC-AV) Active ANSI INCITS 357 Information Technology .Replaces ANSI NCITS 347-2001 Withdrawn ANSI INCITS 348 Information Technology .65 mm).SCSI RDMA Protocol (SRP) Active ANSI INCITS 366 Information Technology .Fibre Channel Backbone (FC-BB) .Replaces ANSI NCITS 341-200 Active ANSI INCITS 342 Information Technology .Switch Fabric .Magnetic Tape Cartridge for Information Interchange.Protected Area Run Time Interface Extension Services (PARTIES) .Digital Cartridge Tape Format .2 (SPC-2) .2 (FC-SW-2) .DocumentNumber Title Status ANSI INCITS 335 Information Technology .Fibre Channel .SCSI Multimedia Commands .10 Gigabit (10GFC) Active ANSI INCITS 365 Information Technology .Replaces NCITS 337-2000 Active ANSI INCITS 338 for Information Technology High-Performance Parallel Interface 6400 Mbit/s Optical Specification (HIPPI-6400-OPT) Active ANSI INCITS 339 Information Technology .Fibre Channel Protocol for SCSI.Fibre Channel .fomerly ANSI NCITS 354:2001 Withdrawn ANSI INCITS 355 Information Technology .Single-Byte Command Code Sets Mapping Protocol-2 (FC-SB-2) .25.3(FC-GS-3) .Replaces ANSI NCITS 340 Active ANSI INCITS 341 Information Technology .6 (ATA/ATAPI-6) . 98214 bpi (3866 bpmm) DLT6 Format - ANSI INCITS 345 Active Replaces ANSI NCITS 345-2001 ANSI INCITS 346 Information Technology .Scheduled Transfer Protocol (ST) .SCSI Architecture Model .6 (ATA/ATAPI-6) Active ANSI INCITS 361 Information Technology – AT Attachment with Packet Interface .Replaces ANSI NCITS 335-2000 Active ANSI INCITS 336 Information Technology .ITI Active ANSI INCITS 361 ERTA Information Technology – AT Attachment with Packet Interface .Helical-Scan Digital Tape Cassette 12.Replaces ANSI NCITS 348-2001 Withdrawn ANSI INCITS 349 Information Technology .Replaces NCITS 339-2000 Withdrawn ANSI INCITS 340 Information Technology .Parallel Interface Performance (PIP) Active ANSI INCITS 369 Information Technology .SCSI Parallel Interface-3 (SPI-3) .50 in (12. Face Recognition Format for Data Interchange Active ANSI INCITS 386 for Information Technology .3 (FC-SB-3) Active ANSI INCITS 375 Information Technology Serial Bus Protocol (SBP-3) Active ANSI INCITS 376 for Information Technology Serial Attached SCSI (SAS) Withdrawn ANSI INCITS 377 Information Technology .Protocol to Facilitate Operation of Information and Electronic Products through Remote and Alternative Interfaces and Intelligent Agent - ANSI INCITS 391 Active Presentation Template Information technology .Generic Services-4 (FC-GS-4) Active ANSI INCITS 388 Information Technology – Storage Management Active for Information Technology Protocol to Facilitate Operation of Information and Electronic Products through Remote and Alternative Interfaces and Intelligent Agents ANSI INCITS 389 Active Universal Remote Console for Information Technology Protocol to Facilitate Operation of Information and Electronic Products through Remote and Alternative Interfaces and Intelligent Agents ANSI INCITS 390 Active User Interface Socket Description Information technology .7 Volume 3 .Signature/Sign Data Active ANSI INCITS 396 for Information Technology Hand Geometry Interchange Format Withdrawn for Information Technology AT Attachment with Packet Interface .Parallel Transport Protocols and Physical Interconnect (ATA/ATAPI-7 V2) Active ANSI INCITS 397 V3 AMD 1 Information Technology – AT Attachment with Packet Interface Extensions 7 – Amendment 1 (ATA/ATAPI-7/AM1) Active ANSI INCITS 397 V3 for Information Technology AT Attachment with Packet Interface .ATA/ATAPI Host Adapters Standard (ATA .Serial Transport Protocols and Physical Interconnect (ATA/ATAPI-7 V3) Active ANSI INCITS 398 Information Technology Common Biometric Exchange Formats Framework (CBEFF) Active .Fibre Channel .Application Profile for Interoperability. Data Interchange and Data Integrity of Biometric-Based Personal Identification for Border ANSI INCITS 394 Active Management ANSI INCITS 395 Information Technology .Register Delivered Command Set. Logical Register Set (ATA/ATAPI-7 V1) Active ANSI INCITS 397 V2 AMD 1 Information Technology – AT Attachment with Packet Interface Extensions 7 – Amendment 1 (ATA/ATAPI-7/AM1) Active ANSI INCITS 397 V2 for Information Technology AT Attachment with Packet Interface .1 for Information Technology Real Time Locating Systems (RTLS) Part 1: 2.Protocol to Facilitate Operation of Information and Electronic Products through Remote and Alternative Interfaces and Intelligent Agent - ANSI INCITS 392 Active Target Description Information Technology .Adapter) Active ANSI INCITS 371.7 Volume 1 .Finger Image-Based Data Interchange Format Active ANSI INCITS 382 for Information Technology SCSI Media Changer Commands-2 (SMC-2) Active ANSI INCITS 383 Information Technology – Biometric Profile – Interoperability and Data Interchange – Biometrics-Based Verification and Identification of Transportation Workers Active ANSI INCITS 384 Information Technology .3 (FC-SW-3) Active ANSI INCITS 385 Information Technology .SCSI Stream Commands -2 (SSC-2) Active ANSI INCITS 381 Information Technology .Fibre Channel HBA API (FC-HBA) Active ANSI INCITS 387 for Information Technology Fibre Channel . Logical Register Set (ATA/ATAPI-7 V1) .DocumentNumber Title Status ANSI INCITS 370 Information Technology .Serial Transport Protocols and Physical Interconnect (ATA/ATAPI-7 V3) ANSI INCITS 397 V1 AMD 1 Information Technology – AT Attachment with Packet Interface Extensions 7 – Amendment 1 (ATA/ATAPI-7/AM1) Active ANSI INCITS 397 V1 for Information Technology AT Attachment with Packet Interface .Biometric Data Interchange Formats .Switch Fabric .Finger Minutiae Format for Data Interchange Active ANSI INCITS 379 Information Technology Iris Image Interchange Format Withdrawn ANSI INCITS 380 For Information Technology .3 for Information Technology Real Time Locating Systems (RTLS) Part 3: Application Programming Interface Active ANSI INCITS 372 for Information Technology Fibre Channel Backbone (FC-BB-2) Withdrawn ANSI INCITS 373 for Information Technology Fibre Channel Framing and Signaling (FC-FS) Active ANSI INCITS 374 AMD 1 Information Technology – Fibre Channel – Single-Byte Command Code Sets-3 – Amendment 1 (FC-SB-3/AM1) Active ANSI INCITS 374 Information Technology Fibre Channel Single-Byte Command Code Sets Mapping Protocol .Finger Pattern Data Interchange Format Active ANSI INCITS 378 Information Technology .Volume 3 .Register Delivered Command Set.Protocol to Facilitate Operation of Information and Electronic Products through Remote and Alternative Interfaces and Intelligent Agents - ANSI INCITS 393 Active Resource Description for Information Technology .2 for Information Technology Real Time Locating Systems (RTLS) Part 2: 433-MHz Air Interface Protocol Withdrawn ANSI INCITS 371.4-GHz Air Interface Protocol Active ANSI INCITS 371.7 Volume 2 .Volume 2 - ANSI INCITS 397 SET Active Parallel Transport Protocols and Physical Interconnect (ATA/ATAPI-7 V2) .7 Volume 1 . Proximity Integrated Circuit Card (PICC) Active ANSI INCITS 411 iSCSI Management API Active ANSI INCITS 412 for Information Technology – SNIA Multipath Management API Specification Active ANSI INCITS 413 for Information Technology – RapidIOTM Interconnect Specification Active ANSI INCITS 414 For Information Technology .1 Biometric Performance Testing and Reporting Part 1: Principles and Framework Active ANSI INCITS 409.1 (SAS-1.Commands (ADC) Active ANSI INCITS 404 For Information Technology – Fibre Channel – Physical Interfaces-2 (FC-PI-2) Active ANSI INCITS 405 SCSI Block Commands .Storage Management Host Bus Adapter Application Programming Interface (SM-HBA) Active ANSI INCITS 429 Conformance Testing Methodology for ANSI INCITS 358-2002.4 for Information Technology – Biometric Performance Testing and Reporting – Part 4: Operational Testing Methodologies Active ANSI INCITS 410 for Information Technology – Identification Cards – Limited Use (LU).2 Biometric Performance Testing and Reporting Part 2: Technology Testing and Reporting Active ANSI INCITS 409.1) Active ANSI INCITS 418 For Information Technology – Fibre Channel – Switch Fabric.3 (EDD-3) Active ANSI INCITS 408 for Information Technology SCSI Primary Commands . Finger Minutiae Format for Data Interchange Information Technology – Conformance Testing Methodology – Part 3: Conformance Testing Methodology for ANSI INCITS 377-2004.2 (SBC-2) Active ANSI INCITS 406 Automation/Drive Interface Transport Protocol (ADT) Active ANSI INCITS 407 for Information Technology BIOS Enhanced Disk Drive Services .4 (FC-SW-4) Active ANSI INCITS 419 Information Technology – Fibre Channel – Backbone .Fibre Channel – Backbone . Third Version (FCP-3) Active ANSI INCITS 417 for Information Technology – Serial Attached SCSI . Finger Pattern Data ANSI INCITS 423.3 (FC-BB-3) Active ANSI INCITS 415 For Information Technology – Homeland Security Mapping Standard – Point Symbology for Emergency Management Active ANSI INCITS 416 For Information Technology – Fibre Channel Protocol for SCSI.5 (FC-GS-5) Active ANSI INCITS 428 Information technology .2 Active Methodology for ANSI INCITS 378-2004. BioAPI Specification Active ANSI INCITS 430 Information Technology – SCSI Multi-Media Commands .4 (MMC-4) Active ANSI INCITS 402 for Information Technology SCSI Architecture Model .DocumentNumber Title Status ANSI INCITS 399 for Information Technology Fibre Channel Switch API (FC-SWAPI) Active ANSI INCITS 400 for Information Technology SCSI Object-Based Storage Device Commands (OSD) Active ANSI INCITS 401 Information Technology SCSI Multimedia Commands .3 (SAM-3) Active ANSI INCITS 403 for Information Technology Automation/Drive Interface .3 (SPC-3) Active ANSI INCITS 409.1.3 Active Interchange Format ANSI INCITS 424 AMD 1 for Information Technology – Fibre Channel – Framing and Signaling-2 (FC-FS-2) Active ANSI INCITS 424 for Information Technology – Fibre Channel – Framing and Signaling-2 (FC-FS-2) Active ANSI INCITS 426 Information Technology – Fibre Channel – Security Protocols (FC-SP) Active ANSI INCITS 427 Information Technology – Fibre Channel – Generic Services .3 Biometric Performance Testing and Reporting Part 3: Scenario Testing and Reporting Active ANSI INCITS 409.4 (FC-BB-4) Active ANSI INCITS 421 For Information Technology – Biometric Profile – Interoperability and Data Interchange – DoD Implementations Active ANSI INCITS 422 Information Technology – Application Profile for Commercial Biometric Physical Access Control Active Information Technology – Conformance Testing Methodology Standard for Biometric Data Interchange Format Standards – Part 1: Generalized Conformance Testing ANSI INCITS 423.5 (MMC-5) Active ANSI INCITS 431 Information Technology – SCSI/ATA Translation (SAT) Active ANSI INCITS 432 Fabric Application Interface Standard (FAIS) Active .1 Active Methodology Information Technology – Conformance Testing Methodology Standard for Biometric Data Interchange Format Standards – Part 2: Conformance Testing ANSI INCITS 423. Fibre Channel – Link Services (FC-LS) Active ANSI INCITS 434 Information Technology – Tenprint Capture using BioAPI Active ANSI INCITS 435 Information Technology – Fibre Channel – BaseT (FC-BaseT) Active ANSI INCITS 437 Information Technology – Fibre Channel – SATA Tunneling Protocol (FC-SATA) Active ANSI INCITS 438 Information Technology – Server Management Command Line Protocol (SM CLP) Specification Active ANSI INCITS 439 Information Technology – Fusion Information Format for Data Interchange Active ANSI INCITS 443 Fibre Channel – Storage Network Ping (SNPing) Active ANSI INCITS 441 Information Technology – Automation/Drive Interface Commands .Metadata) Active ANSI INCITS/ISO 962 Information on processing .Part 03: Equipment technology Active ANSI INCITS/ISO 2382-10 Data processing .Vocabulary Section 10 : Operating techniques and facilities Active ANSI INCITS/ISO 2382-12 Information processing systems .Implementation of the 7-bit coded character set and its 7-bit and 8-bit extensions on 9-track 12.Shapes and dimensions of the printed image Active ANSI INCITS/ISO 1073-2 Alphanumeric character sets for optical recognition .5 in) magnetic tape Active ANSI INCITS/ISO 1073-1 Alphanumeric character sets for optical recognition .Vocabulary .Part II : Character set OCR-B .Arabic 7-bit coded character set for information interchange Active ANSI INCITS/ISO 9282-1 Information processing .Shapes and dimensions of the printed image Active ANSI INCITS/ISO 1831 Printing specifications for optical character recognition Active ANSI INCITS/ISO 2033 Information processing .Part 12 : Peripheral equipment Active ANSI INCITS/ISO 3275 Information processing .Part I : Character set OCR-A .Adopted by INCITS Active ANSI INCITS/ISO 19125-2 Geographic information — Simple feature access— Part 2: SQL option Active ANSI INCITS/ISO 19134 Geographic information — Location-based services — Multimodal routing and navigation Active .Implementation of the 7-bit coded character set and its 7-bit and 8-bit extensions on 3. and the Waters of the Same to the Limit of the Twelve-Mile Statutory Zone ANSI INCITS 447 Information Technology – SCSI Architecture Model .Coding of machine readable characters (MICR and OCR) Active ANSI INCITS/ISO 2382-2 Data processing . Program and System Flowcharts. and Freely Associated Areas.Vocabulary .8-bit single-byte coded graphic character sets . ANSI INCITS 446 Active Outlying Areas.4 SAM-4 Active ANSI INCITS 448 Information Technology – SCSI Enclosure Services .Vocabulary . Territories.Coded representation of pictures .Adopted by INCITS Active ANSI INCITS/ISO 19117 Geographic information — Portrayal .2 (SES-2) Active ANSI INCITS 449 Information Technology – Fabric Application Interface Standard (FAIS-2) Active ANSI INCITS 450 Information Technology – Fibre Channel – Physical Interface-4 (FC-PI-4) Active ANSI INCITS 451 Information Technology – AT Attachment-8 – ATA/ATAPI Architecture Model (ATA8-AAM) Active ANSI INCITS 453 Information Technology – North American Profile of ISO 19115:2003 – Geographic Information – Metadata (NAP .DocumentNumber Title Status ANSI INCITS 433 Information Technology . Program Network Charts and System Resources Charts Active ANSI INCITS/ISO 6586 Data processing .81 mm magnetic tape cassette for data interchange Active ANSI INCITS/ISO 4873 Information Processing .Section 02 : Arithmetic and logic operations Active ANSI INCITS/ISO 2382-3 Information processing systems .Adopted by INCITS Active ANSI INCITS/ISO 19119 AMD 1 Geographic information — Services — AMENDMENT 1 Active ANSI INCITS/ISO 19125-1 Geographic information — Simple feature access — Part 1: Common architecture .7 mm (0.2 (ADC-2) Active Information Technology – Identifying Attributes for Named Physical and Cultural Geographic Features (Except Roads and Highways) of the United States.Implementation of the IS0 7-bit and 8-bit coded character sets on punched cards Active ANSI INCITS/ISO 6709 Standard representation of geographic point location by coordinates Active ANSI INCITS/ISO 8859-7 information processing .Part 7 : Latin/Greek alphabet Active ANSI INCITS/ISO 9036 Information processing .Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment Active ANSI INCITS/ISO 19116 Geographic information — Positioning services .Bit Code for Information Interchange Structure and Rules for Implementation Active ANSI INCITS/ISO 5807 Information Processing .Documentation Symbols and Conventions for Data. Part 13: Commands for application management in a multi-application environment Active ANSI INCITS/ISO/IEC 7816-15 Identification cards .8-bit single-byte coded graphic character sets .Part 1: Identification of organization identification schemes Active ANSI INCITS/ISO/IEC 6523-2 Information technology .Schema for moving features Active ANSI INCITS/ISO/IEC 646 Information technology .IS0 7-bit coded character set for information interchange Active ANSI INCITS/ISO/IEC 1989 CORR 2 Information technology — Programming languages — COBOL Technical Corrigendum 2 Active ANSI INCITS/ISO/IEC 1989 CORR 1 Information technology — Programming languages — COBOL Technical Corrigendum 1 Active ANSI INCITS/ISO/IEC 1989 Information technology Programming languages COBOL .Vocabulary .Adopted by INCITS Active ANSI INCITS/ISO/IEC 2022 Information technology .Part 4: Organization of data Active ANSI INCITS/ISO/IEC 2382-5 Information technology .Magnetic stripes on savingsbooks Active ANSI INCITS/ISO/IEC 8859-1 Information technology .Part 10: Latin alphabet No.&bit single-byte coded graphic character sets .Part 12: Cards with contacts .Part 2: Registration of organization identification schemes Active ANSI INCITS/ISO/IEC 7064 Information technology Security techniques Check character systems . 10 Active ANSI INCITS/ISO/IEC 9075-1 Information technology— Database languages — SQL — Part 1: Framework (SQL/Framework) Active ANSI INCITS/ISO/IEC 9075-2 Information technology — Database languages — SQL — Part 2: Foundation (SQL/Foundation) Active .High coercivity .USB electrical interface and operating procedures Active ANSI INCITS/ISO/IEC 7816-13 Identification cards .Part 1: Physical characteristics .Recording technique .Part 4: Latin alphabet No. 6 Active ANSI INCITS/ISO/IEC 8859-11 Information technology — 8-bit single-byte coded graphic character sets — Part 11: Latin/Thai alphabet Active ANSI INCITS/ISO/IEC 8859-13 Information technology — 8-bit single-byte coded graphic character sets — Part 13: Latin alphabet No.Structure for the identification of organizations and organization parts .Registration of repertoires of graphic characters from ISO/IEC 10367 Active ANSI INCITS/ISO/IEC 7810 Identification Cards – Physical Characteristics Active ANSI INCITS/ISO/IEC 7811-1 Identification cards Recording technique Part 1: Embossing Active ANSI INCITS/ISO/IEC 7811-6 AMD 1 Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity — Amendment 1: Ui6 criteria and test method Active ANSI ISO/IEC 7811-6 Identification cards .Structure for the identification of organizations and organization parts .Vocabulary .Integrated circuit cards . 8 (Celtic) Active ANSI INCITS/ISO/IEC 8859-15 Information technology — 8-bit single-byte coded graphic character sets — Part 15: Latin alphabet No.Adopted by INCITS Active ANSI INCITS/ISO/IEC 7350 Information technology .Integrated circuit cards with contacts .Vocabulary .Integrated circuit(s) cards with contacts . 1 Active ANSI INCITS/ISO/IEC 8859-4 Information technology .DocumentNumber Title Status ANSI INCITS/ISO 19141 Geographic information . 5 Active ANSI INCITS/ISO/IEC 8859-10 Information technology .Integrated circuit cards . high density Active ANSI INCITS/ISO/IEC 7816-1 AMD 1 Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics — Amendment 1: Maximum height of the IC contact surface Active ANSI ISO/IEC 7816-1 Identification cards .Part 6: Magnetic stripe .Vocabulary . 4 Active ANSI INCITS/ISO/IEC 8859-9 Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No.Adopted by INCITS Active ANSI INCITS/ISO/IEC 7811-7 Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity.Part 1: Latin alphabet No.Part 5: Representation of data Active ANSI INCITS/ISO/IEC 2382-9 Information technology . 7 Active ANSI INCITS/ISO/IEC 8859-14 Information technology — 8-bit single-byte coded graphic character sets — Part 14: Latin alphabet No. 9 Active ANSI INCITS/ISO/IEC 8859-16 Information technology — 8-bit single-byte coded graphic character sets — Part 16: Latin alphabet No.Adopted by INCITS Active ANSI INCITS/ISO/IEC 7816-11 Identification cards — Integrated circuit cards — Part 11: Personal verfication through biometric methods Active ANSI INCITS/ISO/IEC 7816-12 Identification cards .Character code structure and extension techniques Active ANSI INCITS/ISO/IEC 2375 Information technology Procedure for registration of escape sequences and coded character sets Active ANSI INCITS/ISO/IEC 2382-1 Information technology .8-bit single-byte coded graphic character sets .Part 9: Data communication Active ANSI INCITS/ISO/IEC 6523-1 Information technology .Part 15: Cryptographic information application Active ANSI INCITS/ISO/IEC 8484 Information technology .Part 1: Fundamental terms Active ANSI INCITS/ISO/IEC 2382-4 Information technology . Part 2: Procedure for registration Active ANSI INCITS ISO/IEC 9293 Information Technology .Database languages .SQL .Part 10: Object Language Bindings (SQL/OLB) Active ANSI INCITS/ISO/IEC 9075-11 Information technology — Database languages — SQL — Part 11: Information and Definition Schemas (SQL/Schemata) Active ANSI INCITS/ISO/IEC 9075-13 Information technology .Picture coding methods .SQL .DocumentNumber Title Status ANSI INCITS/ISO/IEC 9075-3 Information technology — Database languages — SQL — Part 3: Call-Level Interface (SQL/CLI) Active ANSI INCITS/ISO/IEC 9075-4 Information technology — Database languages — SQL — Part 4: Persistent Stored Modules (SQL/PSM) Active ANSI INCITS/ISO/IEC 9075-9 Information technology — Database languages — SQL — Part 9: Management of External Data (SQL/MED) Active ANSI INCITS/ISO/IEC 9075-10 Information technology .Adopted by INCITS Active Information Processing Systems – Computer Graphics – Programmer’ s Hierarchical Interactive Graphics System (PHIGS) Language Bindings – Part 1: FORTRAN - ANSI INCITS/ISO/IEC 9593-1 Active Adopted by INCITS ANSI INCITS/ISO/IEC 9593-4 AMD 2 Information technology — Computer graphics — Programmers Hierarchical Interactive Graphics System (PHIGS) language bindings — Part 4: C' AMENDMENT 2 Active .Picture coding methods .Part 1: Identification Active ANSI INCITS/ISO/IEC 9281-2 Information technology .Volume and File Structure of Disk Cartridges for Information Interchange .Database languages .Part 13: SQL Routines and Types Using the Java TM Programming Language (SQL/JRT) Active ANSI INCITS/ISO/IEC 9075-14 Information technology — Database languages — SQL — Part 14: XML-Related Specifications (SQL/XML) Active ANSI INCITS/ISO/IEC 9281-1 Information technology .