Kisweld Catalog

Searchable - InteractiveProduct Catalog WELDING PRODUCTS Supplier... For The Highest Demands 1 Searchable - Interactive Product Catalog PRODUCTS: Covered Electrodes: Mild Steel High Tensile Low Hydrogen Stainless Steel Tubular Wires: Mild Steel Self-Shielded Metal Cored Stainless Steel Click on SEARCH now or on any page to find any number or word in this document MIG Wires: Or, Mild Steel High Tensile Steel Stainless Steel Click on the text links at right to link directly to the chapter or section you wish to view. TIG Wires: Mild Steel Stainless Steel SUPPORT: Contacts: Customer Services Corporate Addresses Packaging: Covered Electrodes Tubular Wires MIG Wires TIG Wires WELDING PRODUCTS Supplier... For The Highest Demands 2 Please Read Carefully Precautions and Safe Practices WARNING PROTECT YOURSELF AND OTHERS. READ AND UNDERSTAND THIS INFORMATION. FUMES AND GASES can be dangerous to your health. The gas ozone can be irritating if inhaled and can cause delayed lung injury. ARC RAYS can injure eyes and burn skin. ELECTRIC SHOCK can kill. Keep your head out of the fumes. Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases away from your breathing zone and general area. Wear correct eye, ear and body protection. Do not touch live electrical parts. FIRST AID: If exposed to excess welding fumes, remove to fresh air. In case of arc rays, or electrical shock, employ normal first aid techniques and call a physician immediately. Protect yourself and others. Read and understand the manufacturer’s instructions and your employer’s safety practices. See Material Safety Data Sheets (MSDS) for more information about use and disposal. See American National Standard Z49.1, Safety in Welding and Cutting, published by the American Welding Society, 550 N. W. LeJeune Road, Miami, FL 33126, OSHA Safety and Health Standards, CFR 1910 available from the U.S. Government Printing Office, Washington, D.C. 20402 Do not remove this information. For industrial use only. WARNING: These products contain or produce chemicals known to the State of California to cause cancer, birth defects or other reproductive harm (Prop 65) - Do Not Remove, Cover, Or Destroy This Warning - SP PRECAUCIÓN: Los humos y gases de soldadura peuden ser peligrosos para su salud. Utilice ventilación adecuada para alejar los humos del área de respiración. Los rayos del arco peuden danar los ojos y quemar la piel. Utilice los medios adecuados para proteger las manos, ojos, cabeza y cuerpo. Lea y comprenda la Hoja de Datos de Seguiridad del Producto. WELDING PRODUCTS Supplier... For The Highest Demands 3 Luxembourg Tel: +352-26-52-6827/1. BHD.com.com OSAKA Office KISWEL JAPAN LTD. Sungju-dong Changwon. Busan. Fax:+82-51-325-3627 E-mail: busan@kiswel. Chuo-ku. Jalan Keluli 2.com CHANGWON Plant 58-2. Ohdenma-cho. Fax:+81-6-6636-1275 E-mail: younglak@kiswel. Fax:+82-55-285-1655 E-mail: changwon@kiswel. Korea Tel:+82-55-269-7200. Fax: +352-51-50-21224 E-mail: euro@kiswel. Fax: +86-411-751-7783 E-mail: [email protected] Dubai UAE Suite NE411 PO Box 7857 Saif Zone. Sasang-gu. Johor.. Dubai UNITED ARAB EMIRATES LUXEMBOURG Office KISWEL EUROPE BRANCH Krakelshaff. L-3235 Bettembourg.O.co.com BUSAN Plant 721-3. Nihonbashi. Jinma Rd.com Customer Services: 859-371-0070 TOKYO Office KISWEL JAPAN LTD. Osaka. PLO 63. LTD. 2-3-2. 3-Chome. 6F Otori B/D. Namba Naka Naniwa-ku. Japan Tel : +81-3-3669-2490. Dalian E&T Development Zone China Tel: +86-411-751-7780/2. 8-24. 7# Buld. For The Highest Demands 4 . Fax: +86-411-751-7783 E-mail: [email protected] MALAYSIA Plant KISWEL SDN. Fax: +60-7-2515-934 E-mail: marketing@kiswel. Gyeongnam. 81707 Pasir Gudang. KISWEL B/D. Kentucky US 41042 Tel: 859-371-0070. Dalian E&T Development Zone China Tel: +86-411-751-7780/2. P. Fax : +81-3-3669-2494 E-mail: kimsungga@hotmail. Malaysia Tel: +60-7-2515-933.jp DALIAN Office KISWEL CHINA BRANCH. Japan Tel:+81-6-6636-6615. 4-5. Korea Tel:+82-51-317-3131. Tokyo.North America: Worldwide: UNITED STATES Plant KISWEL WELDING PRODUCTS 7950 Dixie Highway Florence.com CHINA Plant KISWEL DALIAN. Fax: 859-371-5210 E-mail: kiswel@kiswelusa.. Box101. 7# Buld. Jinma Rd. 2-3-2.com WELDING PRODUCTS Supplier. Hakjang-dong. ..Covered Electrodes Mild Steel High Tensile Steel Low Hydrogen Steel Stainless Steel WELDING PRODUCTS Supplier. For The Highest Demands 5 . Horizontal and Overhead Flat.0) 160-200 140-170 3/16 (5.916 Y-P (psi) 59.014 % Phosphorus 0.0) 110-150 90-130 5/32 (4. GL.2) 70-110 60-100 1/8 (3. DNV. KR.012 % Y-P (psi) 60.47 % Manganese 0. 1.618 24 % El V-Notch 37 ft/lb @ -20°F Dia inches Amp Flat V&OH El 24 % El 29 % V-Notch 37 ft/lb @ -20°F V-Notch 52 ft/lb @ -20°F Dia inches Length inches Amp Flat Dia inches Packaging Welding Positions Amp Flat V&OH 3/32 (2.10 % Carbon 0.20 % Silicon 0.4) 50-80 40-70 3/32 (2. 2. CWB. Vertical. galvanized steels and casting repairs.8 (300) 50-80 3/32 (2. JIS ABS. Horizontal and Overhead Flat.8 (350) 160 -200 3/16 (5.8 (350) 110-150 5/32 (4. Slightly higher slag volume than E6010 with good bead appearance. Low slag volume results and easy slag removal with good bead appearance.2) 80-120 5/32 (4.8 (350) 80-130 17. Excellent all position general construction electrode designed for use on both DC and AC current. For The Highest Demands WELDING PRODUCTS 6 .7 (400) 130-180 90-140 3/16 (5.519 T-S (psi) 72.7 (400) 160-220 120-190 13. ship building. DNV.45 % Phosphorus 0.0) 15. NK.0) 13.32 % Manganese 0.Available Sizes / Rec. BV.519 T-S (psi) 69. Excellent striking and restriking properties. Welding of steel plates and sheet.37 % Silicon 0.465 Y-P (psi) 62.7 (450) 210-280 - 10# (5 kg) Carton Detailed Packaging Information Flat. Excellent bead appearance without undercut. 3.08 % Carbon 0.0) 13. Parameters Mechanical Properties Weld Metal Composition Characteristics Of Usage Typical Applications Covered Electrodes Mild Steel AWS E6010 KCL-10 AWS E6011 AWS E6013 KCL-11 KR-3000 Used in pressure piping. 1.013 % Sulphur 0.. CWB. 1. tank assembly. meets x-ray requirements. and Overhead ABS.66 % Manganese 0. Excellent slag removal and arc transfer.015 % Phosphorus 0.2) 1/8 (3.07 % Silicon 0. Excellent penetration with good fusion makes this the preferred choice for pipeline welding. LR. LR.4) 11. Produces good mechanical properties. Vertical.015 % Sulphur 0. Excellent operator appeal.8 (350) 60-100 60-90 1/8 (3.366 T-S (psi) 72. Works well with poor fit-up applications. CWB.4) 13. 2. Vertical. 2. 3. JIS. BV. Used for light to medium construction work for all position. LR. piping and ship construction. NK..0) 15. KS Supplier. JIS ABS.012 % Sulphur 0.8 (350) 70-110 1/4 (6.0) Approved Length inches 10# (5 kg) Carton 10# (5 kg) Carton Detailed Packaging Information Detailed Packaging Information 13. Carbon 0. JIS Supplier. Parameters Mechanical Properties Characteristics Of Usage Flat and horizontal fillet welding of ship structures. Designed for high efficiency in single and multiple pass welds. LR.0) 13.8 (300) 100-150 100-150 5/32 (4.8 (350) 140-190 140-190 3/16 (5. structural steels for buildings and general structures.016 % Sulphur 0. self-releasing.672 28 % El V-Notch 52 ft/lb @ 32°F Dia in (mm) 1/8 (3.012 % Approved Welding Positions Packaging Available Sizes / Rec. Quiet and stable arc with good bead appearance and excellent operator appeal.0) 13. For The Highest Demands WELDING PRODUCTS 7 . Carbon 0. NK.6) 13.. BV. DNV. KR..8 (350) 230-270 230-270 10# (5 kg) Carton Detailed Packaging Information Flat and Horizontal Welding Positions ABS. 3. bridges.78 % Phosphorus 0.8 (350) 200-250 200-250 7/32 (5. Weld Metal Composition Typical Applications K-7024 Y-P (psi) 69. CWB.2) Length in (mm) Amp Flat H-Fil 11.Covered Electrodes High Tensile Steel AWS E7024 1. 2. GL.618 T-S (psi) 82.35 % Manganese 0. Easy slag removal.08 % Silicon 0. 4) 13. storage tanks and buildings.06 % Silicon 0.58 % Silicon 0. 2.0) 1/4 (6. storage tanks. CWB.012 % Nickel 0.2) 85-120 1/8 (3.97 % Manganese 1.8 (350) 90-130 13.08 % Phosphorus 0.0) 15. LR ABS. DNV.0) 15.2) 80-110 13. Carbon Y-P (psi) 69. KR. JIS Supplier.31 % Sulphur 0. GL. LR. Excellent usability with direct current applications.8 (350) 70-100 60-90 3/32 (2.8 (350) 60-100 50-80 3/32 (2.7 (400) 160-220 130-180 3/16 (5.4) 13. BV.618 Y-P (psi) 73. For The Highest Demands WELDING PRODUCTS 8 - .07 % Carbon 0.7 (400) 140-190 120-170 3/16 (5.54 % Manganese 0.20 % Welding of 71 ksi class high tensile strength steels of ships.0) 15.Covered Electrodes Low Hydrogen K-8018 Welding of nuclear reactor vessels.672 T-S (psi) 85. KS CWB.572 T-S (psi) 85. NK. LPG storage tanks and similar installations at low temperature.38 % Manganese 1. 1. DNV.0) 10# (5 kg) Carton 17.7 (400) 200-250 160-210 3/16 (5.8 (350) 60-90 50-80 1/8 (3. 0.068 T-S (psi) 82.0) 15. Excellent mechanical properties with good crack resistance of deposited weld metal. JIS. bridges. Parameters Typical Applications K-7018N Characteristics Of Usage AWS E8018-G Weld Metal Composition K-7018 AWS E7018-1 Mechanical Properties AWS E7018 Dia in (mm) Length in (mm) Amp Flat V&OH Dia in (mm) Length in (mm) Amp Flat V&OH Dia in (mm) Length in (mm) Amp Flat V&OH 3/32 (2. Welding of 78 ksi class high strength low alloy steel of ships.8 (350) 90-130 13. pressure vessels.572 El 30% El 32 % El 28 % V-Notch 66 ft/lb @ -20°F V-Notch 96 ft/lb @ -51°F V-Notch 110 ft/lb @ -20°F Approved Welding Positions Packaging Available Sizes / Rec. Excellent impact value at -51°F.07 % Carbon 0.8 (350) 90-130 5/32 (4.2) 80-120 1/8 (3.15 % Nickel 0.969 Y-P (psi) 71.7 (400) 150-190 110-160 5/32 (4.57 % Silicon 0..7 (400) 130-180 110-170 5/32 (4. bridges. building. 1.7 (400) 180-230 160-200 1/4 (6.0) 15. LPG tankers.4) 13. Excellent mechanical properties. industrial machinery and mining machinery. 1.7 (450) 180-230 - 10# (5 kg) Carton Detailed Packaging Information Detailed Packaging Information 17.010 % Molybdenum 0.0) 15..7 (450) 250-300 10# (5 kg) Carton Detailed Packaging Information All Welding Positions All Welding Positions All Welding Positions ABS. 4) 13. etc.58 % 0. 1. Vertical. Carbon Silicon Manganese Chromium Nickel Molybdenum Carbon Silicon Manganese Chromium Nickel Molybdenum 0.Excellent operational performance in all positions.931 El 30 % El 23 % V-Notch 66 ft/lb @ -60°F V-Notch 44 ft/lb @ -60°F Dia in (mm) Length in (mm) Amp Flat V&OH Dia in (mm) Length in (mm) Amp Flat V&OH 3/32 (2.7 (450) 250-320 Detailed Packaging Information Flat..7 (400) 190-240 140-170 3/16 (5. 1.49 % 0. 2.2) 80-120 13.86 % 0.5 ksi class high strength low alloy steel of pressure vessels.7 (400) 180-240 140-200 1/4 (6.8 (350) 50-100 40-80 3/32 (2.07 % 0.0) 15.4) 13.0) 15. Good impact value at -60° F. machinery and penstocks. Excellent mechanical properties especially in notch toughness. Welding of low alloy high strength steels having tensile properties of about 107-114 ksi steels such as HY80.7 (450) 250-310 - 10# (5 kg) Carton 17. bridges.10 % 1.10 % 0.8 (350) 90-130 5/32 (4. Vertical.20 % 0. For The Highest Demands WELDING PRODUCTS - 10# (5 kg) Carton Approved Welding Positions Packaging Available Sizes / Rec.08 % 0.0) 15. Meets stringent radiographic standards for welding of alloy steels.175 T-S (psi) 118..8 (350) 90-130 13. Horizontal and Overhead Supplier.0) 17.672 Y-P (psi) 104.0) 15. Horizontal and Overhead Detailed Packaging Information Flat.8 (350) 50-100 40-90 1/8 (3.427 T-S (psi) 97.41 % 1.32 % 1.Low Hydrogen AWS E9018-M AWS E11018-M K-9018M K-11018M Welding of 85.7 (400) 130-180 110-160 3/16 (5.51 % 1. 2.0) 1/4 (6. Parameters Mechanical Properties Weld Metal Composition Characteristics Of Usage Typical Applications Covered Electrodes 9 .7 (400) 140-190 110-160 5/32 (4.32 % Y-P (psi) 82.2) 80-115 1/8 (3. 09 g/m · hr Dia in (mm) 0.50 % 9. GL.4) 11.877.4) 11.0) 13.7935 Call Customer Service For Availability: 1.Call Customer Service For Availability: 1.. Carbon 0.30 % Welding of dissimilar steel and joining work hardenable steels.. KR Supplier. 2.023 T-S (psi) 84. For The Highest Demands WELDING PRODUCTS 10 - .06 % 0. 304 . BV.8 (250) 40-50 35-45 Amp Flat V&OH 80-120 70-90 3/32 (2.2) 13.8 (350) 110-150 5/32 (4.60 % Amp Flat Nickel Dia in (mm) 9.05 % Silicon 0.877.275 T-S (psi) 87.06 % Carbon 0.0) 13.0) 13.8 (350) 140-180 - 10# (5 kg) Carton 13.30 % Length in (mm) 2 Dia in (mm) Length in (mm) 5/64 (2.8 (350) 110-150 90-130 1/8 (3.308).8 (250) 40-50 5/64 (2.7935 Covered Electrodes Stainless Steel KST-308-16 Welding of 18%Cr-8%Ni stainless steel. 2.0) 13.0) 13. 302. Welding of 18%Cr-8%Ni stainless steel (AISI 301.8 (300) 50-80 40-60 5/32 (4.78 % 4. (AISI 301.4) 11. CWB. Parameters Typical Applications KST-308-15 Characteristics Of Usage AWS E308-16 Weld Metal Composition KST-307-15 AWS E308-15 Mechanical Properties AWS E307-15 13.0) 9.8 (350) 110-150 90-130 3/16 (5.60 % Length in (mm) Nickel Amp Flat V&OH 3/32 (2.38 % Silicon 0.50 % Chromium 19.22 % Chromium 20.54 % Manganese 1.8 (350) 10# (5 kg) Carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec.2) 80-110 1/8 (3.8 (350) 10# (5 kg) Carton Detailed Packaging Information All Welding Positions ABS.Good performance without hardening brittleness due to austenitic structure of the deposited weld metal.8 (350) 140 -180 3/16 (5. Good performance without hardening brittleness due to austenitic structure of the deposited weld metal.0) 9.8 (350) 140 -180 5/32 (4. 302. and heat-resisting steels for temperatures up to 662°F. DNV. austenitic manganese steels. Good heat resistance and corrosion resistance.754.122 El 48 % El 38 % El 44 % 40 % HNO3 0.8 (300) 50-80 3/32 (2.78 % Manganese 1. 304 .0) 13. 1.68 % 18. 1. For use on direct current electrode positive only.8 (350) 45-60 9.2) 80-110 70-100 3/16 (5. Carbon Silicon Manganese Chromium Nickel Molybdenum T-S (psi) 94.30 % 0.754. Good heat resistance and corrosion resistance. armor plate.308) 1.8 (300) 55-80 1/8 (3. 0 g/m · hr Dia in (mm) Length in (mm) 2 Amp Flat V&OH 40-50 35-45 5/64 (2. 0. Excellent welding efficiency because of high deposition rate.0) 9.0) 13.0) 9.6 % Nickel 40 % HNO3 Dia in (mm) Chromium 9.473 El 38 % 5 % H2SO4 5.42 % 19.2) 70-90 5/32 (4. Carbon T-S (psi) 79. 1.0) 13.7935 Covered Electrodes Stainless Steel Welding of low carbon 18%Cr-8%Ni stainless steel (AISI (SUS) 304L).8 (350) 140-180 - 13. Parameters Typical Applications KST-308Mo-16 Characteristics Of Usage KST-308L-16 Weld Metal Composition KST-308L-15 AWS E308L-16 Mechanical Properties AWS E308L-15 Detailed Packaging Information All Welding Positions ABS. oil and all foreign matters from the groove prior to welding.2) 70-110 60-90 1/8 (3.36 % 1. 2.5 % 2 Length in (mm) Amp Flat V&OH 5/64 (2.8 (350) 110-150 90-130 5/32 (4. Welds without brittleness due to structure of deposited weld metal. 2.0) 13.771 El 44 % Chromium 20. 302.1 % T-S (psi) 88. 304 .3 % T-S (psi) 79.06 g/m · hr Length in (mm) Amp Flat V&OH 0. Used for welding wrought materials such as Type 316L stainless when increased ferrite is desired. BV.41 % Silicon 0.771 El 44 % 40 % HNO3 Dia in (mm) AWS E308Mo-16 19. TUV Supplier.03 % Carbon 0. LR.8 (300) 55-80 45-60 1/8 (3. Butt and Fillet welding of ASTM CF8M stainless steel castings.8 (250) 9.2) 70-90 1/8 (3. rust.06 g/m · hr 2 0.67 % Manganese 1.22 % Carbon Silicon Manganese Chromium Nickel Molybdenum Welding of low carbon 18%Cr-8%Ni stainless steel..Call Customer Service For Availability: 1. GL. 1.8 (350) 110-150 90-130 5/32 (4.3 % Nickel 0.754.8 (350) 50-80 40-70 3/32 (2.. Remove water. All welds should be cleaned with a clean stainless steel wire brush. (AISI 301.05 % 0.4)) 11.0) 13.4 % 2. (AISI(SUS)304L). 3.78 % Manganese 1. 1.4) 13. Preheating is not necessary in general.8 (250) 40-50 35-45 3/32 (2.8 (350) 90-130 10# (5 kg) Carton Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec.8 (350) 140-180 3/16 (5.8 (350) - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions .877.308. 2. Excellent welding efficiency because of high deposition rate.8 (350) 110-150 90-130 3/16 (5.8 (350) 140-170 - 3/16 (5. Good heat and corrosion resistance.8 % 9. For The Highest Demands WELDING PRODUCTS 11 13.8 (350) 90-130 10# (5 kg) Carton 13. CWB.0) 13.0) 13. 3. Remove water.4) 11.8 (300) 55-80 45-60 3/32 (2. oil and all foreign matters from the groove prior to welding. rust.05 % Silicon 0. 6 % Chromium 24.877. 1. Welding of dissimilar steels such as Cr-Mo steel or carbon steel to stainless steel.36 % Silicon 0.0) 13. clad side of type 304 clad steels.8 (250) Dia in (mm) T-S (psi) 85.0) 9.3 % 40 % HNO3 Dia in (mm) Length in (mm) Amp Flat V&OH 5/64 (2.40 % Manganese 1. clad stainless steel. Welding of dissimilar metal such as carbon steel to stainless steel.754.2) 70-90 1/8 (3.8 (350) 100-150 80-130 3/16 (5. Welding of dissimilar steels such as Cr-Mo steel or carbon steel to stainless steel.36 % Manganese 1.Call Customer Service For Availability: 1.4) 11.771 El 39 % El 44 % AWS E309L-15 Chromium 24.0) 9..0) 13.72 % Silicon 0.877.08 g/m · hr Length in (mm) Amp Flat V&OH Dia in (mm) Length in (mm) Amp Flat V&OH 40-50 35-45 5/64 (2.8 (250) 30-50 25-45 3/32 (2. For The Highest Demands WELDING PRODUCTS 12 13. 1.8 (350) - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions .06 % Carbon 0. The deposited weld metal contains optmized levels of ferrite to resist weld metal cracking. clad side of type 304 clad steels.7935 Covered Electrodes Stainless Steel Welding of 22%Cr-12%Ni stainless steel and heat-resisting castings.4) 11.572 El 38 % 2 0.8 (300) 55-80 45-60 3/32 (2.6 % Nickel 13.2) 70-90 1/8 (3.4) 11.8 (350) 110-150 90-130 5/32 (4.8 (250) 40-50 35-45 5/64 (2.2) 80-110 70-90 5/32 (4..7935 Call Customer Service For Availability: 1.8 (350) 140-180 - 3/16 (5.754.0) 13. 1.3 % Nickel 12. Carbon T-S (psi) 88.473 T-S (psi) 79.0) 9.8 (300) 55-80 45-60 3/32 (2.3 % Nickel 13.83 % Manganese 1.92 % Welding of 22%Cr-12%Ni stainless steel and heat-resisting castings.0) 13.8 (350) 140-180 13.0) 13.8 (350) 140-170 - 3/16 (5. 2. Good heat resistance and corrosion resistance.8 (350) 90-130 10# (5 kg) Carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec.5 % Chromium 23. 0.0) 13. Welding of 22%Cr-12%Ni steel and heat-resisting castings.05 % Carbon 0. Parameters Typical Applications KST-309L-15 Characteristics Of Usage KST-309-16 Weld Metal Composition KST-309-15 AWS E309-16 Mechanical Properties AWS E309-15 Supplier. The deposited weld metal contains optmized levels of ferrite to resist weld metal cracking. 2.Good heat resistance and corrosion resistance.The deposited weld metal contains optmized levels of ferrite to resist weld metal cracking.8 (350) 110-150 90-130 5/32 (4.8 (300) 50-80 40-60 1/8 (3.03 % Silicon 0.8 (350) 80-110 10# (5 kg) Carton 13. 0) 13. Excellent crack resistance especially in the welding of dissimilar steels such as stainless steel to carbon steel. Build-up welding of Cr-Mo steel or carbon steel.8 (300) 50-70 40-60 3/32 (2..7 % Nickel 12.8 (250) Packaging Welding Positions T-S (psi) 91.8 (350) 140-180 3/16 (5. 1.0) 13. 2.0) 13.06 % 0.84 % 22.4 % 2.47 % 23.Call Customer Service For Availability: 1. Parameters Typical Applications KST-309Mo-15 KST-309Mo-16 Characteristics Of Usage AWS E309Mo-16 Weld Metal Composition KST-309L-16 AWS E309Mo-15 Mechanical Properties AWS E309L-16 Chromium 23.4) 11. Excellent crack resistance especially in the welding of dissimilar steels such as stainless steel to carbon steel.754. For The Highest Demands WELDING PRODUCTS 13 .8 (350) 140-170 13.374 El 5 % H2SO4 36 % Dia in (mm) 2 5.4) 11.8 (350) 100-140 90-130 5/32 (4. 0.8 (300) 50-80 40-60 1/8 (3.6 % 40 % HNO3 Dia in (mm) 2 0.0) 13.71 % Manganese 1.771 El 44 % Available Sizes / Rec.0) 13. 1.374 El 5 % H2SO4 34 % Dia in (mm) 2 5.8 (300) 60-80 50-60 3/32 (2. Carbon T-S (psi) 79. 1.2) 80-100 70-90 1/8 (3.4) 11.8 (350) 80-110 - - - 10# (5 kg) Carton 10# (5 kg) Carton Detailed Packaging Information All Welding Positions 13.877. The deposited weld metal has optimal ferrite levels to resist weld metal cracking. Welding of AISI(SUS)316 clad steel or dissimilar steels..06 % 0. CWB 10# (5 kg) Carton Detailed Packaging Information All Welding Positions DNV Supplier.0) 13.2) 70-90 1/8 (3.3 % T-S (psi) 91. Welding of AISI(SUS)316 clad steel or dissimilar steels.0) 9.78 % 1. 2.8 (350) 110-150 90-130 3/16 (5.4 % 13.2 % 12.06 g/m · hr Length in (mm) Amp F/H-Fil V&OH 5/64 (2. Product also has excellent resistance to corrosion and intergranular attack.5 g/m · hr Length in (mm) Amp Flat V&OH 30-50 25-45 3/32 (2.8 (350) Detailed Packaging Information All Welding Positions ABS.34 % Carbon Silicon Manganese Chromium Nickel Molybdenum Carbon Silicon Manganese Chromium Nickel Molybdenum Welding of 22%Cr-12%Ni steel and heat-resisting castings.35 % 1.8 (350) 140-180 Approved 0. clad stainless steel.03 % Silicon 0.2 % 12.7935 Covered Electrodes Stainless Steel Build-up welding of Cr-Mo steel or carbon steel. Welding of dissimilar metal such as carbon steel to stainless steel.8 (350) 80-110 5/32 (4. Product intended for use with direct current only.8 (350) 110-140 90-130 3/16 (5.2) 70-90 5/32 (4.4 % 2.5 g/m · hr Length in (mm) Amp Flat V&OH 0. 180 - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions All Welding Positions KR CWB Supplier. SCS 18 and clad side of 18%Cr-8%Ni stainless clad steels.1 % 2.8 % Nickel 40 % HNO3 Dia in (mm) Length in (mm) Amp Flat V&OH 5/64 (2. 2.4 % Chromium 25.8 (350) 10# (5 kg) Carton Detailed Packaging Information All Welding Positions .2) 70-90 5/32 (4.40 % Silicon 0.8 (250) AWS E312-16 Dia in (mm) 29.30 % Build-up welding of AISI(SUS)316 clad steel or dissimilar steels.76 % 1.8 (350) 140 -180 13.03 % 0.1 % 8.0) 9..6 % Chromium Nickel 20.4) 11.8 (300) 55-80 45-60 3/32 (2. Parameters Typical Applications KST-312-16 Characteristics Of Usage KST-309MoL-16 KST-310-16 Weld Metal Composition AWS E310-16 Mechanical Properties AWS E309MoL-16 0.5 % T-S (psi) 111.8 (350) 80-110 5/32 (4.08 % Silicon 0.8 (250) 30-50 25-45 3/32 (2.572 T-S (psi) 85.4) 11.8 (300) 40-80 35-75 3/32 (2.8 (350) 110-140 90-130 3/16 (5.0) 13.0) 13.86 % Manganese 1.8 (350) 140 .572 El 41 % El 40 % Approved Welding Positions Packaging Available Sizes / Rec. For The Highest Demands WELDING PRODUCTS 14 - - 10# (5 kg) Carton Detailed Packaging Information 13.0) 13. 1.0) 13.8 (350) 110-140 80-120 3/16 (5.45 % Manganese 1. Joint welding and hardfacing of stainless steel and heat-resisting steels.0) 13.Covered Electrodes Stainless Steel Welding of AISI(SUS) 3105.2 % 13. Carbon Silicon Manganese Chromium Nickel Molybdenum T-S (psi) 85.11 % Carbon 0. Carbon 0.0) 13.8 (350) 100-140 90-130 5/32 (4.08 g/m · hr Length in (mm) Amp Flat V&OH Dia in (mm) Length in (mm) F Amp V&OH 30-55 25-45 5/64 (2. Good mechanical property and heat resistance of the deposited weld metal.0) 9. 1. The deposited weld metal has optimized austenitic structure.679 El 24 % 2 0.4) 11. Welding of 29%Cr-9%Ni type cast steels and difficult-to-weld steels.2) 70-90 1/8 (3. Excellent crack resistance especially in the welding of dissimilar steels such as stainless steel to carbon steel..8 (350) 90-120 13.8 (300) 50-80 40-60 1/8 (3.78 % 23. Improved crack resistance due to high quantity of ferrite in the deposited weld metal.8 (350) 140 -180 3/16 (5.2) 70-110 70-90 1/8 (3. 1. 2) 70-90 1/8 (3.8 (350) 140 -170 - 10# (5 kg) Carton - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec.4) 11.6 g/m · hr Length in (mm) Amp 0.754.2 % 11.672 El 5 % H2SO4 41 % Dia in (mm) AWS E316L-15 2 4.06 % 0.5 % 2. austenitic stainless steels which are required and places where heat treatment after welding is impossible.8 (350) 110-150 90-130 3/16 (5. Good crack resistance and usability.0) 13.5 % 2.8 (350) 110-150 90-130 5/32 (4. 1.0 g/m · hr Length in (mm) F Amp V&OH 40-50 35-45 5/64 (2.8 (300) 50-80 45-60 3/32 (2.8 (350) 110-140 90-130 5/32 (4.Call Customer Service For Availability: 1.. Carbon Silicon Manganese Chromium Nickel Molybdenum T-S (psi) 84.0) 9.2) 80-100 70-90 13. 2.7935 Covered Electrodes Stainless Steel Welding of 18%Cr-12%Ni-Mo stainless steels (AIS1316).18 % 18.40 % 1.0) 13. Carbon Silicon Manganese Chromium Nickel Molybdenum Carbon Silicon Manganese Chromium Nickel Molybdenum Welding of 18%Cr-12%Ni-Mo stainless steel (AISI(SUS) 316).0) 13.0) 13.8 (250) 40-50 35-45 5/64 (2.2) 70-90 1/8 (3.7935 Call Customer Service For Availability: 1.3 % T-S (psi) 82.9 % 11.06 g/m · hr Length in (mm) F 5/64 (2. BV..877.18 % 18.0) 9.4) 11. phosphoric acid and acetic acid.122 El 5 % H2SO4 41 % Dia in (mm) 0. 2.3 % T-S (psi) 85.877.572 El 5 % H2SO4 39 % F V&OH Dia in (mm) 2 5. Excellent corrosion resistance against sulphurous acid. Better resistance to intergranular corrosion than the E316 grade.8 (300) 55-70 45-60 1/8 (3.3 % 12.0) 13.3 % 2 0. phosphoric acid and acetic acid.0) 13.39 % 1.06 % 0.8 (250) Amp V&OH 0. Parameters Typical Applications KST-316L-15 Characteristics Of Usage KST-316-16 Weld Metal Composition KST-316-15 AWS E316-16 Mechanical Properties AWS E316-15 Detailed Packaging Information All Welding Positions ABS.03 % 0.8 (300) 50-70 40-60 3/32 (2. Excellent corrosion resistance against sulphurous acid.754. CWB. Especially suitable for flat and horizontal fillet welding. 1. Welding of low carbon 18%Cr-12%Ni-Mo stainless steels. Welding of dissimilar steels.4 % 2. GL Supplier.8 (350) 140 -170 3/16 (5.8 (350) 80-120 13.4) 11. 1.8 (350) 140 -180 3/16 (5. Welding of dissimilar steels.0) 9.8 (350) 80-120 13.8 (350) 5/32 (4.73 % 1. Especially suitable for flat and horizontal fillet welding. 2.8 (250) 40-50 35-45 3/32 (2.21 % 19. For The Highest Demands WELDING PRODUCTS 15 - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions . 75 % 1. Reduced susceptibility of pitting.3 % 3. austenitic stainless steels which are required and places where heat treatment after welding is impossible.2 % T-S (psi) 84. 2.8 (250) Amp V&OH 0.5 % 12.0) 13.6 g/m · hr Length in (mm) Amp 0.8 (350) 110-150 90-130 3/16 (5. LR. Welding of dissimilar steels such as carbon steel to stainless steels.8 (350) 110-140 90-130 5/32 (4.8 (250) 40-50 35-45 5/64 (2. 2.08 % 18.0) 13..0) 9.8 (350) 110-150 90-130 5/32 (4.. BV. Good weldability and performance.8 (300) 55-90 45-60 3/32 (2.2) 70-90 1/8 (3. Carbon Silicon Manganese Chromium Nickel Molybdenum T-S (psi) 78. CWB.20 % 18.4 % 3.8 (300) 50-70 40-60 3/32 (2.8 (350) 80-120 13. TUV Supplier.320 El 5 % H2SO4 43% Approved Welding Positions Packaging Available Sizes / Rec. Optimum ferrite in the austenitic structure helps resist weld metal cracking.2) 80-110 70-90 13. Welding of low carbon 18%Cr-12%Ni-3%Mo which requires excellent corrosion resistance to sulfuric acid and solutions containing these salts.03 % 0.0) 13.2) 70-90 1/8 (3.06 % 0.122 El 42% 5 % H2SO4 Dia in (mm) AWS E317L-1 6 2 4. 1. KR. GL.03 % 0.0) 13.24 % 18.0) 9.Covered Electrodes Stainless Steel Welding of AISI(SUS)317.6 % 12. 1.3 % T-S (psi) 81. Parameters Typical Applications KST-317L-16 Characteristics Of Usage KST-317-16 Weld Metal Composition KST-316L-16 AWS E317L-16 Mechanical Properties AWS E316L-16 Dia in (mm) 0.3 % 2 5.72 % 1.8 (350) 5/32 (4.4) 11.170 3/16 (5.5 % 2. Better resistance to intergranular corrosion than the E316 grade.74 % 1.8 (350) 140 -180 - 10# (5 kg) Carton - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions ABS.0 g/m · hr F V&OH Dia in (mm) Length in (mm) 2 F Amp V&OH 40-50 35-45 5/64 (2.0) 13. Carbon Silicon Manganese Chromium Nickel Molybdenum Carbon Silicon Manganese Chromium Nickel Molybdenum Welding of low carbon 18%Cr-12%Ni-Mo stainless steels.4 % 12.8 (350) 80-110 13. Reduced susceptibility of pitting.8 (350) 140 -180 3/16 (5.8 (300) 55-80 40-60 1/8 (3.221 El 44% 5 % H2SO4 4. 1. 2.0) 9. For The Highest Demands WELDING PRODUCTS 16 - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions .0) 13. Good weldability and performance.4) 11.8 (350) 140.4) 11.8 (250) 40-60 35-45 3/32 (2.0 g/m · hr Length in (mm) F 5/64 (2. 8 (350) - 10# (5 kg) Carton Detailed Packaging Information All Welding Positions .374 El 36 % 40 % HNO3 Amp AWS E347L-16 0.9 % 9.76 % 1. Welding of low carbon AISI(SUS)304L.4) 11. 2.42 % 1.0) 9.6 % 2 0.8 (350) 140-180 13. 347 stainless steel and the place where heat treatment after welding is not possible.8 (250) 3/32 (2.8 (250) Length in (mm) Approved Welding Positions Packaging Available Sizes / Rec.8 (350) 110-140 90-130 3/16 (5.8 % 0. Carbon Silicon Manganese Chromium Nickel Molybdenum T-S (psi) 91..374 El 38 % 40 % HNO3 Dia in (mm) 0. Carbon Silicon Manganese Chromium Nickel Molybdenum Carbon Silicon Manganese Chromium Nickel Niobium Welding of AISI 318.8 (350) 140-180 - 3/16 (5.68 % 19.0) 13.06 % 0.8 (300) 50-70 60-90 1/8 (3.08 g/m · hr V&OH Dia in (mm) 40-60 35-45 45-60 3/32 (2.2) 88.5 % 0.8 (300) 50-80 1/8 (3.8 (350) 140 -170 - Detailed Packaging Information All Welding Positions Length in (mm) 2 F 10# (5 kg) Carton Detailed Packaging Information 0. Highly resistant to intergranular corrosion due to the addition of Nb.2) 5/32 (4.2) 80-110 70-90 90-130 5/32 (4.98 % 19. 316L stainless steel. 321.03 % 0.7 % T-S (psi) F 5/64 (2.0) 9.0) 13. Excellent intergranular corrosion resistance.32 % 18.5 % 11.. 1.0) 13. The deposited weld metal is highly resistant to pitting and general types of corrosion.08 g/m · hr Length in (mm) T-S (psi) 91.4) 11.08 g/m · hr F V&OH Dia in (mm) 40-60 35-45 5/64 (2. 347 stainless steel and the place where heat treatment after welding is not possible.05 % 0.9 % 2. 316.8 (350) 70-110 All Welding Positions Supplier.8 (350) 120-150 90-130 5/32 (4.46 % 1.8 (350) 100-150 3/16 (5. Excellent intergranular corrosion resistance.0) 13.8 (350) 80-110 10# (5 kg) Carton Amp 13. For The Highest Demands WELDING PRODUCTS 17 Amp V&OH 5/64 (2.8 (300) 55-80 45-60 65-90 1/8 (3. 1.0) 13. Parameters Typical Applications KST-347-16 Characteristics Of Usage KST-318-16 AWS E347-16 Weld Metal Composition E318-16 Mechanical Properties AWS 13.4 % 9.0) 13. 1.0) 9.3 % 2 0.8 (250) 40-60 35-45 45-60 3/32 (2.473 El 36 % 40 % HNO3 0.4) 11.Covered Electrodes Stainless Steel KST-347L-16 Welding of AISI(SUS)304L. 321. - 10# (5 (5 kg)kg) Carton 10# Carton 10# (5 (5 kg)kg) Carton 10# Carton Detailed Packaging Information Detailed Packaging Information AllAll Welding Positions Welding Positions Detailed Packaging Information Detailed Packaging Information AllAll Welding Positions Welding Positions Approved Welding Positions Packaging Available Sizes / Rec. 2. Welding of ofAISI(SUS)403.1 AWS AWSE430-16 E430-16 Chromium Chromium 17.8 13. 405 1.8 13.8 (350)110-140 110-14090-130 90-130 3/16 (5.00.0) (350) 5/32 (4.4)11.4) (300) 3/32 (2.221 T-S (psi) T-S (psi) 76.0)13.0) (350) 3/16 (5.8 (350)80-110 80-110 70-90 70-90 1/81/8 (3.8 (350)80-100 80-100 70-90 70-90 5/32 (4.07 %% 0. 1.0) (350) 3/16 (5.870 76..8 13. Preheat at at 212-392°F and postheat Preheat 212-392°F and postheat treat at 1292-1472°F due to treat at 1292-1472°F due to self-hardening. 2.2) 13.4 %% 17.76 %% 0. Parameters Mechanical Properties Weld Metal Composition Characteristics Of Usage Typical Applications Covered CoveredElectrodes Electrodes Supplier. For The Highest Demands WELDING PRODUCTS 18 . 1.4) (300) 3/32 (2. 1. Welding of of 17%Cr stainless steel.8 (350)140-170 140-170 .0) (350) 5/32 (4.2) (350) (3.8 11.8 13.0)13.4)11.70 Silicon Silicon 0.2) (350) (3.- 3/16 (5. resistance required.8 13.8 (350)110-150 110-15090-130 90-130 5/32 (4.8 (350)150-180 150-180 .Stainless Steel Stainless Steel AWS AWSE410-16 E410-16 KST-410-16 KST-410-16 KST-430-16 KST-430-16 Welding of of 13%Cr steel and surfacing of of Welding 13%Cr steel and surfacing thethe part cavitation or or corrosion partwhere where cavitation corrosion resistance is is required.870 El El 2424 %% El El 3131 %% PWHT PWHT 1346 °F°F x 1x hr S·R 1346 1 hr S·R PWHT PWHT 1400°F x 1x hr S·R 1400°F 1 hr S·R Dia Length Dia Length in in (mm) (mm) (mm) in in (mm) Amp Amp V&OH FF V&OH Dia Length Dia Length in in (mm) (mm) (mm) in in (mm) Amp Amp FF V&OH V&OH 3/32 (2.221 81.8 (300)55-70 55-70 45-60 45-60 1/81/8 (3.40 Chromium Chromium 12.2) 13. Welding 17%Cr stainless steel.70 %% 0. 405 Welding AISI(SUS)403.40 %% 0.07 Silicon Silicon 0. Preheat at at 392-572°F and postheat Preheat 392-572°F and postheat treat at 1292-1472°F. Carbon Carbon 0.. Excellent oxidation corrosion and Excellent oxidation corrosion and abrasion resistance of the deposited weld abrasion resistance of the deposited weld metal.4 T-S (psi) T-S (psi) 81.0 8% 8% Carbon Carbon 0.0)13.8 (300)60-90 60-90 45-60 45-60 3/32 (2.1 %% 12. metal. self-hardening.76 Manganese Manganese 0. treat at 1292-1472°F.42 %% 0.8 11.42 Manganese Manganese 0.0)13.8 13. Tubular Wires Mild Steel Self-Shielded Metal Cored Stainless Steel WELDING PRODUCTS Supplier... For The Highest Demands 19 . 000 T-S (psi) 82.045 (1. offshore structures.000 El 25 % T-S (psi) El El 28 % F V-notch 100 ft/lb @ -22 F H-Fil Dia in (mm) Approved Welding Positions Packaging Available Sizes / Rec.013 % o V-notch 48 ft/lb @ -4 F Amp H-Fil F 140-340 200-460 140-340 200-460 Dia in (mm) Ar+20%CO2 0. 3.016 % 0. 2. 1. 100%CO2 or Ar+20-25%CO2 shielding gas should be used.450 120 .045 (1. 3.2) 120 . SG Carbon Silicon Manganese Phosphorus Sulphur SG Carbon Silicon Manganese Phosphorus Sulphur Typical Applications Characteristics Of Usage 1.30 % 0.014 % 0.50 % 1.068 Y-P (psi) 68. good bead appearance.4) CO2 0.04 % 0. Mechanical Properties AWS E70T-1C/1M.000 psi tensile steel with outstanding mechanical properties. Efficient due to higher deposition rates.013 % o Amp F H-Fil . smooth welding arc with low spatter levels. For The Highest Demands WELDING PRODUCTS Detailed Packaging Information .672 79. Titania type of flux cored wire for flat and horizontal position welding.34 % 1.. 2.013 % 29 % o 50ft/lb @ -22 Amp F . 9C/9M V-notch Dia in (mm) .Tubular Wires Mild Steel AWS E70T-1 K-70T AWS E70T-5M K-70TB K-70ST Designed for welding of 71 ksi high tensile steel with only Ar/C02 mixtures. Excellent deposition rate.4) Detailed Packaging Information Flat and Horizontal Detailed Packaging Information Flat and Horizontal Flat and Horizontal ABS. Parameters Designed for welding of 71 ksi high tensile steel with outstanding mechanical properties. 1.0) CO2 0.045 (1. shipbuilding. KS Supplier.Flux cored wire designed for flat and horizontal position welding.45 % 0. K-70ST is designed for welding of 70. Use with 100% CO2 or Ar+20-25%CO2 .300 1/16 (1.49 % 1.6) 200 . Use Ar+20-25%CO2 shielding gas.320 Y-P (psi) 71. Typical application is general fabrication where the risk of hydrogen-induced cracking is to be avoided. 3. Weld Metal Composition SG Carbon Silicon Manganese Phosphorus Sulphur Y-P (psi) 78.6) 5/64 (2. 4. bridges and general fabrications.03 % 0.015 % 0. 4.4) 160-380 180-360 1/16 (1. Arc characteristics are smooth and stable. steel fabrication and construction industries.BV. Typical applications include machinery.052 (1..6) 180-420 220-400 3/32 (2.2) 140-300 160-300 .04 % 0.771 T-S (psi) 80.36 % 0. 4. low spatter levels. Good fracture toughness at low temperatures with low susceptibility to cracking. Soft.2) 1/16 (1. 2.GL. For flat and horizontal position welding.300 200 . It is most suitable for fillet welding of inorganic zinc-primer coated steels often used in the machinery. Provides smooth arc.450 3/32 (2. LR JIS. DNV. DNV. good impact strength at low temperatures. For The Highest Demands WELDING PRODUCTS .012 % o 68 ft/lb @ -22 F CO2 0.013 % 0.Tubular Wires Mild Steel AWS E70T-1C/1M. KS ABS. LR ABS.6) 180-420 220-400 Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information Dia in (mm) F Amp H V Dia in (mm) F Amp H-Fil V Flat and Horizontal Flat.. Ar+20-25%CO2 should be used. shipbuilding.052 (1.037 % 0. 2.2) 140-300 160-300 .59 % 1.2) 120-300 120-300 120-220 . shipbuilding.6) 200-450 200-400 180-220 1/16 (1. Horizontal. Mechanical Properties K-71TM V-notch CO2 0.6) 200-450 200-450 180-240 1/16 (1. 4. 1.56 % 1. KS Supplier.420 Y-P (psi) 72. It provides soft. bridges and general fabrications. 3. DNV. better bead appearance.014 % o Dia in (mm) F Amp H-Fil . smooth welding arc with less spatter levels. JIS. RINA. BV.045 (1. bridges and general fabrications. 2. GL. 2. 4.2) 120-300 120-300 120-220 . bridges and general fabrication.. JIS. Parameters Designed for welding of 70.4) 160-380 180-360 1/16 (1. Vertical. Efficient welding with deposition rates.35 % 0. KR. offshore structures. less spatter levels. SG Carbon Silicon Manganese Phosphorus SG Carbon Silicon Manganese Phosphorus Sulphur Typical Applications Characteristics Of Usage 1. 3. Vertical. For semi-automatic.44 % 0.38 % 1. 4. Typical applications include machinery. CCS. Better CVN toughness at lower temp.03 % 0.045 (1.420 El 28 % El 28 % El 28 % V-notch 59 ft/lb @ -4 F Approved Welding Positions Packaging Available Sizes / Rec. Titanic type for all-position welding. 100%C02 shielding gas should be used. Overhead and Vertical Down ABS.519 T-S (psi) 84.000 psi tensile steel with outstanding mechanical properties. KR. TUV. Titania type for all-position welding. Low fume generation.015 % 0. DNV. 3. Weld Metal Composition SG Carbon Silicon Manganese Phosphorus Sulphur Y-P (psi) 73.03 % 0. 9C/9M KX-200H AWS E71T-1/-1M K-71TLF AWS E71T-1M Formulated for welding of 71 ksi high tensile steel with outstanding mechanical properties. Designed for flat and horizontal position welding.and multiple pass welding. Designed for welding of 71 ksi high tensile steel with only Ar/C02 mixtures.60 % 0.013 % 0. LR. RINA. offshore structures. Good porosity resistance and used for fillet welding of inorganic zinc-primer coated steels. single. TUV.672 T-S (psi) 75. shipbuilding. Overhead and Vertical Down Flat.000 T-S (psi) 82. automatic. offshore structures.000 Y-P (psi) 75. LR.045 (1. NK. Typical applications include machinery. 1. Typical applications include machinery. GL. BV. Horizontal. Stable arc.010 % Sulphur V-notch o 59 ft/lb @ -4 F Ar+20 % CO2 0. 4.6) 180-400 200-360 180-260 1/16 (1.012 % o 74 ft/lb @ -22 F Amp H CO2 0.12 % 0. Section IX.20 % 0. offshore structures.000 Y-P (psi) 78.9) .6) 180-400 200-360 180-260 V Detailed Packaging Information All Positions F Detailed Packaging Information All Positions Supplier. Parameters Typical Applications K-71TP Characteristics Of Usage K-71T Plus Weld Metal Composition AWS E71T-1C/1M. Titania type for all-position welding.9) 100-240 120-220 120-160 . and low spatter. 9C/9M . 1..000 psi tensile strength steels. 2. good weld soundness.000 T-S (psi) 83.43 % 1.000 T-S (psi) 83. 3.035 (. It provides excellent feedability and soft welding arc.045 (1.011 % 0.2) 120-300 140-260 160-240 . It has easy slag removal. as well as less spatter generation.015 % 0. shipbuilding. 12C/12M Mechanical Properties AWS E71T-1C/1M. Ar+20-25%CO2 gases should be used.000 psi tensile steel for use with both CO 2 or Ar/CO2 gas properties.011 % Sulphur o Dia in (mm) Amp H Dia in (mm) F .2) 120-300 140-260 160-240 1/16 (1.000 El 28 % El 28 % V-notch 74 ft/lb @ -22 F V-notch CO2 0. Provides low fume generation and has good toughness at low temperatures.40 % 1.. 1. Provides improved impact toughness and lower Mn content reqired in ASME Boiler and Pressure Vessel Code. For The Highest Demands WELDING PRODUCTS V 100-240 120-220 120-160 Approved Welding Positions Packaging Available Sizes / Rec. It can be used in a variety of applications including shipbuilding.Tubular Wires Mild Steel This wire is designed for low temp. SG Carbon Silicon Manganese Phosphorus Formulated for welding of 70.03 % 0. pressure vessels. This is a titania type flux cored wire for all position welding.025 % 0. Typical applications include machinery. For 70. 3. bridges and the construction industries.035 (. impact properties. 2.045 (1. SG Carbon Silicon Manganese Phosphorus Sulphur Y-P (psi) 77. bridges and general fabrication. Wire is for all position welding of single and multiple pass fabrications.2) 80-200 1/16 (1.2 % Y-P (psi) 72. It is designed for on site general fabrication and structural work requiring no impact properties.045 (1. Weld Metal Composition K-NGS11 Supplier. Parameters Mechanical Properties Self-shielded flux cored wire for lap and fillet welds of mild and medium tensile steels not exceeding 74 ksi. 3.10 % 0. tanks. farm equipment. Carbon Silicon Manganese Phosphorus Sulphur Aluminum 0. Welding arc is smooth and stable. building fabrication..016 % 0.Tubular Wires Self Shielded AWS E71T-11 Typical Applications Characteristics Of Usage 1.519 T-S (psi) 76.006 % 1.870 El 23 % Dia in (mm) Amp F . ornamental iron.6) 160-270 5/64 (2..55 % 0.0) 180-280 Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec. For The Highest Demands WELDING PRODUCTS 24 . Suitable for prefab. 2. 4.Designed for use with DCEN. repairs and general fabrication.10 % 0. 618 Y-P (psi) 73.969 Y-P (psi) 76.6 mm) x 33# (15 kg) spool Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information Flat and Horizontal * Can be used in all position welding when using appropriate pulsed welding equipment Flat and Horizontal * Can be used in all position welding when using appropriate pulsed welding equipment Flat and Horizontal * Can be used in all position welding when using appropriate pulsed welding equipment ABS. 3.03 % 0. JIS. Intended for semi-automatic. KR. For flat and horizontal position welding.052 (1. offshore structures.877. GL.7935 Tubular Wires Metal Cored KX-706M Typical applications include machinery. LR.54 % 1.50 % 0. RINA (80%Ar + 20%CO2 TUV) ABS. Parameters Typical Applications KX-100 Characteristics Of Usage AWS E70C-6M Weld Metal Composition KX-70CM AWS E70C-3C Mechanical Properties AWS E70C-3M Ar+20 % CO2 0.60 % 1. GL. Good CVN toughness at low temp. SG Carbon Silicon Manganese Phosphorus Sulphur SG Carbon Silicon Manganese Phosphorus Sulphur Designed for welding of 71 ksi high tensile steel with only Ar/C02 mixtures.55 % 0. KS. automatic. It is especially suitable for fillet welding and has a high tolerance to primer. Deposition can be higher than solid wires.* 2. BV.045 (1.40 % 1.4) 180-420 220-380 1/16 (1.* 2. 4.870 T-S (psi) 78.473 El 29 % El 29 % El 27 % V-notch 41 ft/lb @ -4 F Approved Welding Positions Packaging Available Sizes / Rec. It is especially suitable for fillet welding and has a high tolerance to primer.045 (1. JIS. single and multiple pass welding.2) 160-350 180-360 .754..011 % o 44 ft/lb @ -4 F V-notch Dia in (mm) Amp F/H-Fil Ar+20 % CO2 0. Can have higher productivity compared to solid wires.6) 180-360 280-450 Dia in (mm) Amp F H .2) 160-340 180-350 . Higher tolerance to rust/ mill scale compared to E70C-3 grade. RINA.60 % 0. BV.2) 140-340 . For The Highest Demands WELDING PRODUCTS 25 . GL.04 % 0.4) 160-380 180-360 1/16 (1. 3. 4. SG Carbon Silicon Manganese Phosphorus Y-P (psi) 69.2 mm) x 33# (15 kg) spool 1/16” (1. DNV. 1. 1.045 (1.320 T-S (psi) 79.6) 240-450 280-450 1/16 (1. For flat and horizontal position welding.771 T-S (psi) 88.. 1. single/multiple pass welding. Multiple pass welding can be performed without removing slag.* 2. BV. automatic.014 % 0. JIS.04 % 0. CWB (Ar + 2-20%CO2) Supplier.014 % 0. DNV. 3. Wire is a metal type of flux cored wire for flat and horizontal position welding.014 % 0.6) 200-460 . Good penetration with excellent wetting characteristics. Designed for welding of 71 ksi high tensile steel with only Ar/C02 mixtures. shipbuilding. KS.013 % o F/H-Fil Amp V .Call Customer Service For Availability: 1. KS.100%C02 shielding gas should be used. NK ABS.052 (1. LR. bridges and general fabrications.013 % Sulphur o 41 ft/lb @ -4 F V-notch Dia in (mm) CO2 0.045” (1. LR. Multiple pass welding can be performed without removing slag. DNV. 4. Semi-automatic. It is especially suitable for fillet welding and has a high tolerance to primer. bridges and fabrication. Provides excellent feedability and good penentration.000 psi tensile steel with only Ar/CO2 gas mixtures.. Slag content generation is same as a solid wire and is a multiple pass wire that can be used without removing slag. Can be used semi-automatically.000 El 27 % V-notch 60 ft/lb @ -22 F Dia in (mm) Ar+20 % CO2 0. automatically.Tubular Wires Metal Cored AWS E70C-6M Typical Applications Characteristics Of Usage 1.4) 160-380 180-360 1/16 (1. . shipbuilding. high resistance to porosity.04 % 0.and multiple pass.014 % 0. offshore structures. 3. For The Highest Demands WELDING PRODUCTS . Mechanical Properties KX-706M Plus Supplier. 2.. good wetting action and low hydrogen. single. Parameters KX-706M Plus is designed for welding of 70.Typical applications include machinery.045 (1. Weld Metal Composition SG Carbon Silicon Manganese Phosphorus Sulphur Y-P (psi) 73.2) 140-300 160-300 .000 T-S (psi) 83.45 % 0.45 % 1.6) 180-400 220-380 Detailed Packaging Information Flat and Horizontal Approved Welding Positions Packaging Available Sizes / Rec.052 (1.013 % o Amp F H . BV.59" .5 % Ar+20 % CO2 0. 304LN.045” (1. JIS.5 % 10. Characteristics Of Usage 1.87 % 19.. It is designed for operation primarily in the flat position and for welding horizontal fillet welds. BV. KR. 3.Titania type flux core with self detaching slag with a spray-like transfer. CWB.98" 160-260 .045” (1. Can be used with both 100% CO2 and 80%Ar+20%CO2.Call Customer Service For Availability: 1.Titania type flux core with self detaching slag with a spray-like transfer. Horizontal Fillet and Groove Welds JIS ABS.754.5 % 10.3 % SG CO2 T-S (psi) 84..2 mm) x 33# (15 kg) spool 1/16” (1.2) .79" 100-220 .60 % 1. NK.045 (1. KR.3 % 10. 304L.98" . 2.122 88. high efficiency with optimized ferrite for good resistance to crack susceptibiity..59" . ASTM A157 Gr.6) . Low spatter.374 38 % 36 % El Electrode Extension Amp Dia in (mm) .55 % 19.4 % Ar+20 % CO2 0.045 (1.7935 Tubular Wires K-308LT K-308T Typical Applications Designed for MAG welding of low carbon 18%Cr-8%Ni stainless steel and used to join 301. B8C or D) K-308T is formulated for MAG welding of 18%Cr-8%Ni stainless steels.6) . For The Highest Demands WELDING PRODUCTS 27 . C9.70 % 1. Horizontal Fillets and Groove Welds Flat. Designed for MAG welding of low carbon 18%Cr-8%Ni stainless steels. It is designed for operation primarily in the flat position and for welding horizontal fillet welds.59" . Low spatter.03 % 0. 1.877.80 % 20.473 38 % 36 % CO2 Ar+20 % CO2 82.79" 100-220 160-260 1/16 (1. high efficiency with optimized ferrite for good resistance to crack susceptibiity. Can be used with both 100% CO2 and 80%Ar+20%CO2.6) T-S (psi) El Dia in (mm) .52 % 1.8 % 10.. Overhead.39" . 3.Titania type flux core with self detaching slag with a spray-like transfer..6 mm) x 33# (15 kg) spool Detailed Packaging Information SG T-S (psi) CO2 0.2 % Nickel CO2 0. NK Supplier. 2.79" 100-220 .5 % AWS E308T0-1/-4 Ar+20 % CO2 0.03 % 0. 1. 304 and 308 stainless steel. Weld Metal Composition SG Carbon Silicon Manganese Chromium Nickel SG Carbon Silicon Manganese Chromium SG Carbon Silicon Manganese Chromium SG Approved Welding Positions Packaging Available Sizes / Rec.90 % 19. high efficiency with optimized ferrite for good resistance to crack susceptibiity..62 % 1.045” (1. TUV.05 % 0.672 88. Vertical Down Flat.2) 1/16 (1..7 % 10.03 % 0.03 % 0.2 mm) x 33# (15 kg) spool 1/16” (1. A320 Gr.56 % 19. JIS (80%Ar + 20%CO2 : CWB.04 % 0. Horizontal.2 mm) x 33# (15 kg) spool 1/16” (1.045 (1. 2.5 % Nickel CO2 Ar+20 % CO2 89.923 91. Parameters K-308LT0 AWS E308LT1-1/-4 Mechanical Properties Stainless Steel AWS E308LT0-1 / -4 CO2 0.98" 160-260 1/16 (1. DNV.39" . (AISI 304..5 % 10. TUV) ABS. 302.6 mm) x 33# (15 kg) spool Detailed Packaging Information Ar+20 % CO2 .70 % 20. 3.473 38 % 35 % El Electrode Extension Amp Dia in (mm) Electrode Extension Amp .75 % 1. Low spatter. Can be used with both 100% CO2 and 80%Ar+20%CO2.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.39" .2) .79 % 1. 6) .80 % 1.03 % 0.2) . Ar+20 % CO2 0.3 % CO2 Ar+20 % CO2 79.754.4 % Ar+2 % CO2 T-S (psi) 81. Designed for low carbon 22%Cr-12%Ni stainless steels. JIS WELDING PRODUCTS CO2 0.59” . Dissimilar joint welds.6) ..3 % SG Carbon Silicon Manganese Chromium Nickel SG Carbon Silicon Manganese Chromium Nickel CO2 Ar+20 % CO2 SG 91. bellows.79” 140-220 1/16 (1.374 92. For The Highest Demands 28 Ar+20 % CO2 0. lt is suitable for automotive exhaust fabricators such as front pipe. 3.39” .1 % . Not intended for use above 750°F.6) .045 (1..2) .045” (1. Increased Cr and Ni levels provide good resistance to cracking. SG Carbon Silicon Manganese Chromium Nickel SG Approved Welding Positions Packaging Available Sizes / Rec. Designed for welding most mild steels to austenitic stainless alloys 2..59” .045 (1. 1. Vertical and Overhead KR.60 % 1.6 % 13.045” (1.2 mm) x 33# (15 kg) spool 1/16” (1. Increased Cr and Ni provides improved resistence to cracking 3.2 mm) x 33# (15 kg) spool 1/16” (1. 1. Horizontal Fillets and Groove Welds JIS SG T-S (psi) Supplier.221 El 40 % Dia in (mm) Electrode Extension Amp .2 % 13. Dissimilar joint welds.48 % 1.03 % 0.40 % 23.023 38 % 40 % El Dia in (mm) Electrode Extension Amp .65 % 1.0 % 13.03 % 0. Horizontal Fillets and Groove Welds AWS E309LT1-1/-4 Ar+2 % CO2 0.55 % 24. Cladding for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N. flange...92 % 23.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.79” 100-220 1/16 (1.2 % T-S (psi) 40 % El Dia in (mm) Electrode Extension Amp . 436.7935 Tubular Wires Stainless Steel Designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels. (AISI 409.60 % 24.2) .8 % 13.. Designed for welding most mild steels to austenitic stainless alloys 2.045 (1.045” (1. Parameters Typical Applications K-309LT1 Characteristics Of Usage K-309LMT Weld Metal Composition K-309LT0 AWS EC309L Mechanical Properties AWS E309LT0-1 /-4 CO2 0.. 1.877.Call Customer Service For Availability: 1.9 % 12.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.824 38 % Designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. 2.Cladding for corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to finegrained steel S500N. Not recommended for use above 750°F.98” 160-260 .98” 180-260 . Increased Cr and Ni provides improved resistence to cracking 3.57 % 23.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.59” .98” 160-260 .2 mm) x 33# (15 kg) spool 1/16” (1. Not intended for use above 750°F.771 87..79” 100-220 1/16 (1.39” .39” .03 % 0.72 % 1.03 % 0. Designed for use on most carbon steels to type 304 stainless steels. cladding and dissimilar joint welds). 754..59” .7935 CO2 0.473 35 % 36 % El SG Carbon Silicon Manganese Chromium Nickel CO2 0.6 mm) x 33# (15 kg) spool Detailed Packaging Information Dia in (mm) Electrode Extension Amp .54 % 1.045 (1. forging dies. Horizontal Fillets and Groove Welds Flat. Excellent usability with stable arc.2) .2) 100-240A 100-240A 140-200 1/16 (1.2) .39” . steels with reduced weldability and buffer layers prior to hardfacing (rolls.0 % 2. 2.. superior heat resistance and corrosion resistance.83 % 1.03 % 0. LR.2 mm) x 33# (15 kg) spool 1/16” (1. JIS JIS Supplier.7 % CO2 97. Dissimilar joint welds.7 % 13.754.045” (1. 3.6) .2 mm) x 33# (15 kg) spool 1/16” (1.Call Customer Service For Availability: 1. Cladding for the first layer of corrosion resistant weld claddings on ferriticperlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N. Characteristics Of Usage 1.877. Overhead. better bead appearance. 2. SG Carbon Silicon Manganese Chromium Nickel Molybdenum SG Carbon Silicon Manganese Chromium Nickel SG Approved Welding Positions Packaging Available Sizes / Rec.78 % 1. BV.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat. It is used for joining dissimilar steels.79” 100-220 . Higher tensile strength when compared to conventional K-309LT wire. Provide better weldability with superior heat resistance and corrosion resistance.05 % 0. 1.45 % 23. Horizontal.58 % 1. DNV. For Mo-alloyed claddings the product is necessary for the first layer.6 mm) x 33# (15 kg) spool Detailed Packaging Information Dia in (mm) F Amp H V . Formulated for MAG welding of 22%Cr-12%Ni stainless steels. Overhead.0 % SG T-S (psi) AWS E312T1-1 Ar+20%CO2 0. Vertical Down KR.04 % 0.045 (1.39” .98” 160-260 1/16 (1. less spatter levels..045” (1.59” . 2.6) . such as 304 to mild steel or low alloy steels.7 % 13.98” 160-260 1/16(1.045” (1. Typical applications are for welding of dissimilar steels.6) 160-260A 160-380A 180-240 . Horizontal.00 % 30.7935 Call Customer Service For Availability: 1.. JIS ABS. Parameters K-309MoLT AWS E309T0-1/-4 Weld Metal Composition Stainless Steel AWS E309LMoT1-1 Mechanical Properties Tubular Wires Call Customer Service For Availability: 1.877. hotwork tools and dies for plastics). NK.7935 K-309T K-312T Typical Applications Designed for low carbon 22%Cr 12%Ni-Mo.2 % 9. Formulated for MAG welding of 30%Cr-9%Ni stainless steels.5 % 13. KR.5 % CO2 SG 110.572 88. 1.93 % 23.229 T-S (psi) 25 % El Electrode Extension Amp . For The Highest Demands WELDING PRODUCTS 29 .30 % 23..045 (1.175 T-S (psi) 32 % El Dia in (mm) CO2 0.04 % 0. Designed primarily for flat and horizontal welding applications. Better weldability.79” 100-220 .2 mm) x 33# (15 kg) spool 1/16” (1.754.. Vertical Down Flat.Good resistance to stress corrosion attack and reduced scaling at temperatures up to 2100 °F.877.4 % CO2 Ar+20 % CO2 85. 98” 160-260 .4 % 12.045” (1.122 88.473 38 % 37 % Electrode Extension Amp .2 mm) x 33# (15 kg) spool 1/16” (1. NK. For The Highest Demands WELDING PRODUCTS 30 .3 % 12.6 % 11.. Addition of Mo resists pitting corrosion typically brought on by sulphuric and sulphurous acids 2.79” 100-240 1/16 (1. JIS (80%Ar + 20%C02 : CWB.42 % SG CO2 Ar+20 % CO2 87.4 % 12.20 % 18. DNV. KR. Low spatter.023 89.6 mm) x 33# (15 kg) spool Detailed Packaging Information SG T-S (psi) El Dia in (mm) CO2 0... Weldability is excellent with lower crack susceptibility..6 mm) x 33# (15 kg) spool Detailed Packaging Information CO2 0.98” 160-260 . Designed for welding type 316L stainless.7 % 11.82 % 18. Weldability is excellent with lower crack susceptibility. KR.2) . easy slag removal and good weld soundness. Parameters Typical Applications K-316T Characteristics Of Usage K-316LT1 Weld Metal Composition K-316LT0 AWS E316LTI -1 /-4 Mechanical Properties AWS E316LTO-1/-4 T-S (psi) El Dia in (mm) Ar+20 % CO2 0.2 mm) x 33# (15 kg) spool 1/16” (1.39” .5 % CO2 Ar+20 % CO2 84.04 % 0.4 % 2.39” . Horizontal Fillets and Groove Welds JIS ABS.754. CWB.03 % 0. RINA..877.47 % 18.923 40 % 38 % Electrode Extension Amp . 316Ti. Low carbon content gives good resistance to most types of corrosion of the weld metal (AISI 316L.60 % 1.03 % 0. 316Cb) Formulated for MAG welding of 18%Cr-12%Ni-2%Mo stainless steels where increased resistance to pitting corrosion is required (AISI 316. 1.045” (1. Horizontal.. Low carbon content which gives good resistance to most types of corrosion of the weld metal.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat. Overhead.59” .5 % 2.59” ..59” . Vertical Down Flat.Designed for applications where pitting corrosion is evident as found in pulp and paper mills 2.045 (1. TUV. Horizontal Fillets and Groove Welds Flat. SG Carbon Silicon Manganese Chromium Nickel Molybdenum SG Carbon Silicon Manganese Chromium Nickel Molybdenum Designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel.76 % 1.85 % 18.2 % 2.045 (1. 2.98” 160-260 . Increased creep resistance at elevated temperature.75 % 1.8 % 2.Call Customer Service For Availability: 1.771 89. SG Carbon Silicon Manganese Chromium Nickel Molybdenum CO2 0.6) .62 % 19.6) .8 % SG T-S (psi) El Dia in (mm) AWS E316T0-1 / -4 Ar+20 % CO2 0.39” .4 % 2.70 % 1.79” 100-240 1/16 (1.58 % 19.2) . 316L) 1.03 % 0.045 (1.923 39 % 38 % Approved Welding Positions Packaging Available Sizes / Rec.7935 Tubular Wires Stainless Steel Designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steels.6) . 1..03 % 0.2 mm) x 33# (15 kg) spool 1/16” (1. BV. TUV) ABS.5 % Ar+20 % CO2 0. JIS Supplier.79” 100-220 1/16 (1.2 % 12.5 % CO2 Ar+20 % CO2 79.65 % 1.045” (1.2) .0 % 2.05 % 0.50 % Electrode Extension Amp .65 % 1. 8 % Ar+20 % CO2 0. Overhead. 1. Weldability is excellent with lower crack susceptibility. Nb improves resistance to intergranular corrosion of the weld metal..877.49 % 1. Vertical Down ABS. UNS 531803.7935 CO2 0. JIS Supplier.1 % 9. Vertical Down .67 % 23. Formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless steels. (AISI 347.351 119.5 % 0. (ASTM A185 Gr..03 % 0.366 T-S (psi) 98.2 mm) x 33# (15 kg) spool 1/16” (1.045 (1.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat. Parameters K-317LT AWS E2209T1-1 /-4 Weld Metal Composition Stainless Steel AWS E317LT1-1 Mechanical Properties Tubular Wires Call Customer Service For Availability: 1.59” . Overhead. JIS ABS.03 % 0.05 % 0.6 % 2. Self-detaching slag.045” (1.79” 100-240 1/16 (1. 317LN.6 mm) x 33# (15 kg) spool Detailed Packaging Information Dia in (mm) Amp F H V .2) 100-240 100-240 120-200 1/16 (1. Horizontal. A320 Gr.7 % 3.39” .316LN.63 % 1. Applications are chemical plant and shipbuilding as well as nuclear plant industries.65 % 1. Horizontal. 1..03 % 0. Horizontal.2) .Call Customer Service For Availability: 1.754.7935 Call Customer Service For Availability: 1. JIS 329.8 % 13..11) Formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels. easy slag removal and good weld soundness.25 % 18. SG Carbon Silicon Manganese Chromium Nickel Molybdenum SG Carbon Silicon Manganese Chromium Nickel Molybdenum SG Approved Welding Positions Packaging Available Sizes / Rec. DIN 1. Lower crack susceptibility. 321.75 % 19. 317L. C9. Excellent in pitting corrosion resistance and stress corrosion cracking resistance.2 mm) x 33# (15 kg) spool 1/16” (1. UNS S31726).626 El 33 % El 27 % 27 % El 34 % Dia in (mm) Electrode Extension Amp .473 T-S (psi) 118. Higher levels of Mo for increased corrosion-resistance. Overhead. (AISI 316L.62 % 1.045 (1.83 % 23.5 % CO2 AWS E347T1-1 CO2 0.6) 160-260 160-260 160-220 . shipbuilding as well as nuclear plant industries. 2. 3.51.877. The principal area of application is process and chemical plant.3 % 9.2 mm) x 33# (15 kg) spool 1/16” (1. 3.2) .6) . A157 Gr. For The Highest Demands WELDING PRODUCTS 31 Dia in (mm) Electrode Extension Amp .98” 160-260 1/16 (1.754.59” . B8C or D) Characteristics Of Usage 1.7935 K-329T K-347T Typical Applications Designed for MAG welding of low carbon 19%Cr-13%Ni-3%Mo stainless steels.5 % 10. Wire has low spatter.045” (1.79” 100-240 .045” (1.045 (1. Produces a weld with easy slag removal and minimal spatter.5 % 2.. excellent weldability and increased creep resistance at elevated temperature. ASTM A296. 2.98” 160-260 .54 % CO2 T-S (psi) 88.39” . 2.754.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.8 % SG Carbon Silicon Manganese Chromium Nickel Niobium CO2 Ar+20 % CO2 SG SG CO2 0.6) .. Vertical Down Flat.877.4462. spray-like arc transfer. 2) . Designed for MAG welding of martensite stainless alloys of the 13%Cr types.6) . Horizontal Dia in (mm) Electrode Extension .59” -.045 (1.1 % 0. Parameters Developed to meet the needs of the automotive exhaust fabricators that desired a metal cored wire.05 % 0.. It is used for surfacing of sealing faces of valves for gas.59” -.20 % 0. Horizontal ABS 13.877.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat. Designed for high speed welding of ferritic steels with low spatter and good bead appearance.. 1.. 1382°Fx1hr.2 mm) x 33# (15 kg) spool 1/16” (1.754.045” (1.045 (1. Horizontal CO2 Ar+20 % CO2 76.2 mm) x 33# (15 kg) spool 1/16” (1.2 mm) x 33# (15 kg) spool 1/16” (1.0 % Dia in (mm) Electrode Extension Amp .7935 Tubular Wires Call Customer Service For Availability: 1.6) . 1..672 24 % 22 % 1382°Fx1hr.98” 180-270 .6) .98” .4 % 1. For The Highest Demands WELDING PRODUCTS 32 Amp .60 % 11.754.03 % 0.79” Amp 160-240 1/16 (1.6 mm) x 33# (15 kg) spool Detailed Packaging Information JIS Supplier.55 % 0.39” . Designed also for high speed automotive applications where good bead appearance and tolerance to joint fit-up variations is desirable.2) . 2. It excels in the pulsed GMAW mode.045 (1. Designed primarily for welding of martinsitic alloys such as the 13 % chrome types 2.771 T-S (psi) 20 % El CO2 Ar+20 % CO2 Carbon 0.47 % 0.79” Flat.07 % 0.59” -.7 % SG Carbon Silicon Manganese Chromium Titanium Ar+2 % O2 0.221 T-S (psi) 20 % El 79.045” (1. It excels in the pulsed GMAW mode.2) . Consult material manufacturer for proper procedures.50 % 0.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.69 % Chromium 13.0 % SG SG Ar+2 % O2 SG Ar+2 % O2 SG Approved Welding Positions Packaging Available Sizes / Rec. Preheat is recommended..98” .870 82.2 % . water and steam piping system at service temperatures up to 842°F.877.07 % Silicon 0.79” 180-260 1/16 (1. Typical Applications Characteristics Of Usage 1. Y-S (psi) El PWHT Dia in (mm) Electrode Extension 100-240 1/16 (1.39” . Weld Metal Composition SG Carbon Silicon Manganese Chromium Titanium Ar+2 % O2 0.Call Customer Service For Availability: 1.45 % 12.32 % Manganese 0.39” .045” (1.7935 Stainless Steel AWS EC409 K-409Ti AWS EC409 K-409TiC AWS E410T0-1/-4 Developed to meet the needs of the automotive exhaust fabricators that desired a metal cored wire. Can out perform solid wires and be more tolerant of joint variations with use of proper procedures. Mechanical Properties K-410T 81. water and steam valves. Horizontal Fillets and Groove Welds Ar+2 % O2 0. 430Ti. (AISI 403.6) . Horizontal Fillets and Groove Welds Flat. 4.03 % 0.183 Y-P (psi) 68. KR. bellows. 2. Provides higher corrosion resistance. 420.754.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.6 mm) x 33# (15 kg) spool Detailed Packaging Information SG Carbon Silicon Manganese Chromium Molybdenum Titanium Ar+2 % O2 0. SCS6. water and steam valves. 4.754.59” .. ASTM CAI 5M..2 mm) x 33# (15 kg) spool 1/16” (1. 430Ti. For The Highest Demands WELDING PRODUCTS 33 . Horizontal Fillets and Groove Welds JIS ABS. Produces a moderately soft arc and low spatter generation.2 % 4.045” (1. etc. CA6NM) 1.23 % 0. 2. (AISI 430. It is suitable for automotive exhaust fabricators such as front pipe.1 % 0. 3.6) .0 % Dia in (mm) Electrode Extension Approved Welding Positions Packaging Available Sizes / Rec.63 % 17..35 % 0. Mo component improves good crack resistance and heat resistance.045 (1. SG Carbon Silicon Manganese Chromium Nickel Designed for MAG welding of soft martensite stainless alloysof the 13%Cr-4%Ni-Mo types.7935 Call Customer Service For Availability: 1.2) . Parameters Typical Applications K-436T Characteristics Of Usage K-430T Weld Metal Composition K-410NiMoT AWS EC430 Mechanical Properties AWS E410NiMoT0-4 Amp F H 120-220 120-240 .1 % 0. dissimilar steels) (AISI 409. flange. bellows. For high speed welding.595 T-S (psi) 69.893 Y-P (psi) 52. Produces a moderately soft arc and low spatter generation. flange. DNV.36 % 12.183 El 25 % El 23 % PWHT - Ar+20 % CO2 0. 2. SG Carbon Silicon Manganese Chromium Nickel Molybdenum SG Ar+20 % CO2 SG Ar+2 % O2 SG Ar+2 % O2 T-S (psi) 126. ASTM A1761) Designed for MAG welding of stainless steels of the 17%Cr-1 Mo-Ti types..2) 1/16 (1. Suitable for automotive exhaust fabricators such as front pipe.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat.877.39” . CVN toughness and crack resistance. LR. PWHT Dia in (mm) Amp .7 % 1112°F x 1hr.045” (1. JIS SCS3. 431.79” 100-240 . 431.2 % 1. For flat and horizontal position welding. 3. GL.045” (1.5 % Dia in (mm) Amp F H 120-220 120-240 .49 % 16. etc. (AISI 430.045 (1.02 % 0. Suitable for surfacing of sealing faces of gas.5 % 1.877. 405.939 El 25 % T-S (psi) 77.79” 180-280 1/16 (1.04 % 0.61 % 0. 436) 1.7935 Tubular Wires Stainless Steel Designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. 1.2 mm) x 33# (15 kg) spool 1/16” (1.2 mm) x 33# (15 kg) spool 1/16” (1. Features very good ductility.Call Customer Service For Availability: 1. heat resistance due to high alloy designs. NK Supplier. 410. For high speed welding. BV. Suitable for surfacing of sealing faces of gas. 3 % SG Ar+2 % O2 Y-P (psi) 69.6) . SG Carbon Silicon Manganese Chromium Ar+2 % O2 0.664 22 % El Dia in (mm) Electrode Extension Amp Volt . Produces moderately soft arc and low spatter levels. 3. Parameters Mechanical Properties Weld Metal Composition Characteristics Of Usage Typical Applications K-439T Supplier.98” 160-260 23-30 .59” .2) .. bellows.03 % 0.Tubular Wires Stainless Steel Designed for MAG welding of stainless steels of the 18%Cr-1%Ti types.908 T-S (psi) 72. Deposition rate can be higher than solid wires with proper welding procedures.6 mm) x 33# (15 kg) spool Detailed Packaging Information Flat. It is suitable for automotive exhaust fabricators such as front pipe.045 (1.2 mm) x 33# (15 kg) spool 1/16” (1. flange. (AISI 430.33 % 0.8 % Nickel 0. 431) 1. Horizontal Fillets and Groove Welds Approved Welding Positions Packaging Available Sizes / Rec.045” (1. 2. 430Ti...79” 100-240 20-28 1/16 (1..39” . Maintains high tensile strength in high temperature atmosphere. For The Highest Demands WELDING PRODUCTS 34 .64 % 17. MIG Wires Mild Steel High Tensile Steel Stainless Steel WELDING PRODUCTS Supplier... For The Highest Demands 35 . ABS.9) (1. JIS. GL.6) 30 % Amp F 50-200 70-250 100-350 140-400 200-550 V&OH 50-120 50-150 50-180 100-250 120-300 Detailed Packaging Information All position with proper equipment and procedures.7935 MIG Wires Call Customer Service For Availability: 1.7935 KC-25M KC-26 Typical Applications Used in virtually all areas of steel construction from automotive to pressure vessel shops. Weld Metal Composition Carbon 0.035 . transportation bridges.4) 1/16 (1.07 % Carbon 0. railcar and shipbuilding.2) (1. 1. LR.011 % Sulphur 0.4201 78.366 AWS ER70S-G Ar+20 % C02 SG Ar+20 % C02 SG 63. Can be used in all positions with pulse equipment. KS Supplier. Suitable for high speed welding of steel sheet by short circuiting transfer in all positions.06 % Silicon 0.8) .754.. Parameters KC-25C AWS ER70S-3 Mechanical Properties Mild Steel AWS ER70S-3 CO2 Y-P (psi) 62.53 % Phosphorus 0. railcar and shipbuilding.040 .877.122 CO2 Ar+20 % C02 T-S (psi) 75. Can be used in all positions with pulse equipment.045 (1.040 (1.20 % Manganese 1. 2. CWB.035 (0. 3.4) (1. NK. transportation bridges. Characteristics Of Usage 1.2) (1. 2.9) .4) (1.8) (0. KS Dia in (mm) . Used in virtually all areas of steel construction from automotive to pressure vessel shops. NK.030 (0.80 % Manganese 1. KR.2) . DNV.015 % Phosphorus 0.011 % Sulphur 0.07 % Carbon 0..320 T-S (psi) 78. KR. railcar and shipbuilding.221 El 33 % 30 % El 30 % El 29 % V-notch 66 ft/lb @ 0 °F 74 ft/lb @ 0° F V-notch 74 ft/lb @ 0 °F V-notch 81 ft/lb @ 0 °F 89 ft/lb @ 0 °F Dia in (mm) F . transportation bridges.030 . 1. Applicable to mixture gas(Ar+20% C02).817 Y-P (psi) 63.045 . 3.817 Y-P (psi) 71. Wide range of operability depending on applications and procedures. JIS.068 75.0) (1.0) . buildings.010 % SG Approved Welding Positions Packaging Available Sizes / Rec.0) (1.030 .877.320 T-S (psi) 81.052 (1. Stable arc and low spatter loss.8) (0.040 . Stable arc and low spatter loss.014 % Sulphur 0. 2.045 . buildings.035 . DNV. Wide range of operability depending on applications and procedures. Amp F (0.67 % Silicon 0. Suitable for high speed welding of thick plates. ABS.754.052 1/16 (0. LR.20 % Manganese 1. BV.420 84.Call Customer Service For Availability: 1. Stable arc and low spatter loss.052 1/16 Detailed Packaging Information All position with proper equipment and procedures.6) Amp 50-120 50-140 80-250 100 -350 140-400 200-450 V&OH Dia in (mm) 50-100 50-120 60-150 70-200 100-250 120-300 .6) 50-200 70-250 100-350 140-400 200-550 Detailed Packaging Information All position with proper equipment and procedures.015 % Phosphorus 0.67 % Silicon 0. For The Highest Demands WELDING PRODUCTS 36 . buildings.9) (1. Used in virtually all areas of steel construction from automotive to pressure vessel shops. 07 % 0.7935 MIG Wires Mild Steel Butt and Fillet welding of vehicles.771 88. JIS ABS.8) (0. JIS.2) (1.6) Amp V&OH 50-200 70-250 100-350 140-400 50-120 50-150 50-180 100-250 200-550 120-300 Detailed Packaging Information All position with proper equipment and procedures.4) (1.068 79.473 El 31 % El 30 % 28 % El V-notch 118 ft/lb @ 0 °F V-notch 52 ft/lb @ -20 °F 52 ft/lb @ -20 °F V-notch 59 ft/lb @ -20 °F 37 ft/lb @ -20 °F Dia in (mm) .6) 26 % Amp F 50-200 70-250 100-350 140-400 200-550 V&OH 50-120 50-150 50-180 100-250 - Detailed Packaging Information All position with proper equipment and procedures.9) (1.8) (0.035 . 2. Arc is very stable and can be used for welding steels which have a rusty or scaling surface oxide(AI.07 % 0.07 % Carbon 0.9) (1. machinery and bridges in all positions. ships.. Zr). KR. particularly in pipe welding root passes in Mig or Tig . 1.18 % Manganese 1.771 84. .030 .045 .9) (1.2) (1.0) (1. bridges. Excellent for all position welding.754. low spatter loss and less slag formation. LR.045 . NK. Excellent bead appearance when used with argon Co2 gas shielding.53 % Phosphorus 0.07 % Silicon 0. ships.052 1/16 (0.877.040 . machinery and bridges. 2. Weld bead wets out with good surface tension to support open root welds.86 % Manganese 1.030 .0) (1. DNV.068 T-S (psi) Approved Welding Positions Packaging Available Sizes / Rec. machinery and shipbuilding.040 . DNV. KS Supplier.6) Amp F V&OH 100-350 50-180 140-400 100-250 200-550 120-300 Detailed Packaging Information CO2 0. All position with proper equipment and procedures.08 % 0. 1.040 .267 69.618 Y-P (psi) 71.754. 1. For The Highest Demands WELDING PRODUCTS 37 CO2 Ar+20 % C02 29 % Dia in (mm) .014% Phosphorus 0. NK.8) (0.54 % 1.877. ABS.045 . Carbon SG Ar+20 % C02 SG Y-P (psi) 71. Stable arc.0) (1. 3.035 .122 T-S (psi) 79.. building.4) (1.Call Customer Service For Availability: 1.007 % Carbon Silicon Manganese Titanium Aluminum Zirconium Butt and Fillet welding of vehicles. Good arc characteristics in all positions due to triple deoxidizing alloy content. Parameters Typical Applications KC-70S2 Characteristics Of Usage KC-28C Weld Metal Composition KC-27 AWS ER70S-6 Mechanical Properties AWS ER70S-G AWS ER70S-2 Ar+20 % C02 SG Y-P (psi) 65. Surface tension is conducive to all position welding especially in open root pipe or plate welding.18 % 0.2) (1.010% Sulphur 0. steel frames.052 1/16 (0. BV.771 81. TUV. CCS.030 .221 T-S (psi) 79.62 % Silicon 0. GL. Butt and Fillet welding of vehicles.4) (1.012 % Sulphur 0.052 1/16 F (0. 0. Ti. 2. cars.7935 Call Customer Service For Availability: 1.035 .05 % Dia in (mm) . Deposited weld metal has excellent notch toughness. CWB. Call Customer Service For Availability: 1.877.754.7935 Call Customer Service For Availability: 1.877.754.7935 Mild Steel AWS ER70S-G ZO-55 ZO-60 Butt and Fillet welding of mild steel and 768 ksi class high tensile strength steel. Construction equipment, bridges and buildings. Construction machinery, bridges and storage tanks. Butt and H-fillet welding of 839 ksi class high tensile strength steel. 1. Excellent mechanical properties obtained under high heat input and interpass temp. 2. Excellent productivity in both fillet and groove welding in both low and high heat inputs. 1. Arc is very stable, spatter is less and weldability is excellent even in high welding current range. 2. High working efficiency is obtained by automatic and semi-automatic welding due to high deposition rate and deep penetration. Carbon 0.07 % Carbon 0.07 % Silicon 0.92 % Silicon 0.84 % Manganese 1.92 % Manganese 1.95 % Titanium 0.18 % Molybdenum 0.31 % Titanium 0.17 % SG Y-P (psi) T-S (psi) El IV Welding Dia in (mm) .030 .035 .040 .045 .052 1/16 AWS ER80S-G CO2 CO2 84,122 68,168 92,824 81,221 27 % 29 % 170(17) 32 °F 120(12) 32 °F 18KJ/cm,302 °F 40KJ/cm,662 °F (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) F Amp V&OH 100-350 50-180 140-400 100-250 200-550 120-300 Detailed Packaging Information All position with proper equipment and procedures. SG CO2 Ar+20% C02 Y-P (psi) 79,771 84,122 T-S (psi) 92,824 95,725 28 % 27 % El V-notch 81 ft/lb @ 0 °F 103 ft/lb @ 0 °F Dia in (mm) .030 .035 .040 .045 .052 1/16 Amp F (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) Detailed Packaging Information All position with proper equipment and procedures. Supplier... For The Highest Demands WELDING PRODUCTS V&OH 120-350 80-180 150-400 100-250 200-500 120-300 NK, JIS Approved Welding Positions Packaging Available Sizes / Rec. Parameters Mechanical Properties Weld Metal Composition Characteristics Of Usage Typical Applications MIG Wires 38 Call Customer Service For Availability: 1.877.754.7935 MIG Wires Call Customer Service For Availability: 1.877.754.7935 High Tensile Steel KC-90SB3 1.25%Cr-0.5 Mo heat resistant steels. 2.25%Cr-1% Mo heat resistant steels. 1. Argon rich gas mixtures are recommended. 2. Excellent mechanical and toughness properties after PWHT. 3. Post weld heat treatment may be advisable. Follow manufacturer’s recommendations. 1. Argon rich gas mixtures are recommended. 2. Excellent mechanical and toughness properties after PWHT. 3. Post weld heat treatment may be advisable. Follow manufacturer’s recommendations. 0.08 % Carbon 0.09 % Carbon 0.09 % Silicon 0.58 % Silicon 0.54 % Silicon 0.47 % Manganese 1.85 % Manganese 0.51 % Manganese 0.66 % Molybdenum 0.46 % Chromium 1.26 % Chromium 2.31 % Molybdenum 0.45 % Molybdenum 1.0 % Butt and Fillet welding of construction equipment, boiler, low alloy steels and 0.5%Mo alloy steel. 1. Used for welding steels employed at elevated temperatures up to 932 °F. 2. Where joint thickness is critical, it is important to apply the correct preheating and interpass temperatures. Carbon SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2 Y-P (psi) 88,473 Y-P (psi) 72,519 Y-P (psi) 82,672 T-S (psi) 100,076 T-S (psi) 84,122 T-S (psi) 95,725 El 23 % El 25 % El 24 % V-Notch 44 ft/lb @ -20 °F V-Notch 59 ft/lb @ 32 °F V-Notch 59 ft/lb @ 0 °F Dia in (mm) F Dia in (mm) F Dia in (mm) .030 .035 .040 .045 .052 1/16 (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) Amp F V&OH 50-180 80-250 120-350 140 -400 50-120 60-150 70-200 100-250 220-450 120-250 Detailed Packaging Information All position with proper equipment and procedures. .030 .035 .040 .045 .052 1/16 Amp (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) V&OH 100-350 50-180 140-400 100-250 200-550 120-300 Detailed Packaging Information All position with proper equipment and procedures. Approved Welding Positions Packaging Available Sizes / Rec. Parameters Typical Applications KC-80SB2 Characteristics Of Usage AWS ER90S-B3 Weld Metal Composition KC-80D2 AWS ER80S-B2 Mechanical Properties AWS ER80S-D2 Supplier... For The Highest Demands WELDING PRODUCTS 39 .030 .035 .040 .045 .052 1/16 (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) Amp V&OH 100-350 50-180 140-400 100-250 200-550 120-300 Detailed Packaging Information All position with proper equipment and procedures. Call Customer Service For Availability: 1.877.754.7935 Call Customer Service For Availability: 1.877.754.7935 MIG Wires Call Customer Service For Availability: 1.877.754.7935 Stainless Steel AWS ER2209 M-2209 AWS ER308 M-308 M-308H Welding of 18%Cr-8%Ni stainless steels (AISI 301, 302, 304). It provides better weldability together with excellent corrosion resistance. Welding of high carbon 18%Cr-8%Ni stainless steels (AISI 304H). It provides better weldability together with excellent corrosion resistance. 1. Designed for welding types 301, 302, 304, 304L, 308 and 308L grades of austenitic grades of stainless steels 2. Can also be used to weld grades 321 and 347 when service temperatures do 1. Product is designed primarily for welding of type 304H and and 347H austenitic stainless steels when high temperature services are required. Carbon 0.04 % Carbon 0.05 % Silicon 0.38 % Silicon 0.42 % Manganese 1.90 % Manganese 2.06 % Nickel 9.80 % Nickel 9.70 % Typical Applications Characteristics Of Usage 1. 2209 is a duplex stainless steel for welding type 2205 duplex stainless. 2. Has a high resistance to corrosive medias such as chlorides and hydrogen sulfides 3. Good resistance to intergranular, pitting and stress corrosion cracking. Weld Metal Composition Carbon Silicon Manganese Nickel Chromium Molybdenum SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2 T-S (psi) 121,832 T-S (psi) 88,473 T-S (psi) 85,572 El 28 % El 40 % El 44 % IV (J) -51°F:110 IV (J) RT:110 IV (J) 0.01 % 0.40 % 1.75 % 8.70 % 22.70 % 3.20 % not exceed 600°F. Chromium 19.80 % Chromium Dia in (mm) Dia in (mm) Dia in (mm) .030 .035 .040 .045 .052 1/16 .030 .035 .040 .045 .052 1/16 .030 .035 .040 .045 .052 1/16 (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) 19.90 % - -40°F:82 -321°F:50 (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) (0.8) (0.9) (1.0) (1.2) (1.4) (1.6) Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information All position welding is possible with the use of proper welding equipment and procedures. All position welding is possible with the use of proper welding equipment and procedures. All position welding is possible with the use of proper welding equipment and procedures. Approved Welding Positions Packaging Available Sizes / Rec. Parameters Welding of 23%Cr-9%Ni-3%Mo stainless steels (UNS S31803, STS 329J1/329J2L). Various applications of chemical engineering, shipbuilding and nuclear plant industries, etc. Mechanical Properties AWS ER308H Supplier... For The Highest Demands WELDING PRODUCTS 40 035 .Call Customer Service For Availability: 1. such as wetting.672 T-S (psi) 85.9) (1.02 % Carbon 0.7935 MIG Wires Stainless Steel M-309LMo Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 304L. 2..040 .877. 1.754.6) Detailed Packaging Information All position welding possible with proper welding equipment and procedures. 302.0) (1.045 .052 1/16 .4) (1. Can also be used to weld grades 321 and 347 when service temperatures do not exceed 600°F.8) (0.2) (1.9) (1.38 % Silicon 0.052 1/16 . Also used for welding of austenitic stainless alloys to carbon steels.75 % Manganese 1. Primarily for welding type 316 stainless clad steels on the root pass and some dissimilar metals with additions of Mo. It provides better weldability together with excellent corrosion resistance. 308L). For The Highest Demands WELDING PRODUCTS 41 0. Service temperatures should not exceed 750°F.5 % 23.035 .8) (0. Parameters -321 °F:82 (0.75 % 1.0) (1.90 % Manganese 1. 3.045 .45 % 14.95 % Nickel 9.877.030 . Designed for use for most austenitic grades that normally use the 308 grade. 304L. 1.754.. 2.80 % -321 °F:60 -40 °F:89 Dia in (mm) Dia in (mm) Dia in (mm) .4) (1.052 1/16 (0. This enhances the cosmetics of the bead appearance when required . CWB. but with added silicon that greatly enhances wetting of the weld bead. The high silicon content improves the welding properties.040 . Weld Metal Composition M-308L AWS ER308LSi Carbon Mechanical Properties AWS ER308L SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2 T-S (psi) 82.572 T-S (psi) 95. .2) (1.030 . 308L).6) Detailed Packaging Information All position welding possible with proper welding equipment and procedures.2) (1. 304. Designed for welding types 301. Approved Welding Positions Packaging Available Sizes / Rec.035 .02 % 0.8) (0.61 % (0. TUV Supplier.02 % Silicon 0.030 .040 .70 % Carbon Silicon Manganese Nickel Chromium Molybdenum Typical Applications M-308LSi Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 304L.725 El 44 % El 42 % El 33 % 32 °F:90 IV (J) 32 °F:110 IV (J) 32 °F:92 Chromium IV (J) 19. 0.4) (1. Suitable for dissimilar metal joint and underlaying on ferritic steels for overlaying stainless steel weld metals. Characteristics Of Usage AWS ER309LMo 1.40 % Chromium 19.9) (1.045 .20 % 2.80 % Nickel 10. 308 and 308L grades of austenitic grades of stainless steels.0) (1.7935 Call Customer Service For Availability: 1.6) Detailed Packaging Information All position welding possible with proper welding equipment and procedures. 2) (1. Can also be used to join types 410 and 430 stainless when preheating and heat treatment are not practical. 312 can also be used to join some abrasion resistant steels.030 . Wire is widely used for joining of dissimilar metals such as carbon steel to stainless steel.030 . 2.9) (1.035 . Parameters Typical Applications M-310 Characteristics Of Usage AWS ER312 Weld Metal Composition M-309LSi AWS ER310 Mechanical Properties AWS ER309LSi Supplier. Welding of stainless steel of the 29%Cr-9%Ni types.040 . Designed primarily for the joining of 309 stainless where good wetting and bead appearance are important.0) (1.045 .7935 MIG Wires Call Customer Service For Availability: 1.2) (1..7935 Stainless Steel M-312 Welding of heat-resistant austenitic steels of the 25%Cr-20%Ni types(STS310S). 3. 1.75 % Silicon 0. Can be used in all positions with pulsed welding equipment and good welding procedures.73 % Manganese 1. especially at high temperature. Non. Developed primarily for welding type 310 stainless.052 1/16 .10 % Silicon 0. 1.8) (0.6) Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information Can be used in all positions with pulsed welding equipment and good welding procedures.754.877.70 % Nickel 20.023 T-S (psi) 105. Service temperatures below 750°F. It has good general oxidation resistance. 0.70 % Welding of austenitic stainless alloys of the 22%Cr-12%Ni low carbon types and for joining stainless steels to non-alloy or low-alloy steels. Non.052 1/16 (0.28 % Manganese 1.030 . 2.040 . Type 312 was originally designed to join high temperature heat resistant alloys as well as strength high alloy steels to themselves and some dissimilar metals 2.4) (1.10 % Silicon 0.60 % Chromium Dia in (mm) Dia in (mm) Dia in (mm) .8) (0. For The Highest Demands WELDING PRODUCTS 42 .43 % Manganese 2.6) - (0.045 . such as wetting.8) (0.035 .052 1/16 . Can be used in all positions with pulsed welding equipment and good welding procedures.72 % 8.02 % Carbon 0.pulsed welding is more limited to flat and horizontal welding.Call Customer Service For Availability: 1.6) 30. The additional silicon aids in smooth bead contour and superior wetting into the adjacent base metal.pulsed welding is more limited to flat and horizontal welding. Non.20 % Chromium 26. The high silicon content improves the welding properties.2) (1.9) (1.40 % Welding Positions Available Sizes / Rec.pulsed welding is more limited to flat and horizontal welding.572 T-S (psi) 87.10 % Carbon 0.040 .0) (1.90 % Nickel Chromium 23.045 .878 El 40 % El 40 % El 30 % IV (J) 32 °F:90 IV (J) 32 °F:110 IV (J) Nickel 13. 1.754.9) (1.4) (1..0) (1. Approved Packaging (0.4) (1. Carbon SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2 T-S (psi) 85.035 .877. 20 % 18.20 % 1. For The Highest Demands WELDING PRODUCTS 43 .040 .8) (0. Carbon Silicon Manganese Chromium Nickel Molybdenum 385 °F:62 385 °F:50 Dia in (mm) Dia in (mm) .6) Detailed Packaging Information Detailed Packaging Information Detailed Packaging Information Can be used in all positions with pulsed welding equipment and good welding procedures. such as wetting.030 .052 1/16 .85 % 12.30 % Welding Positions Available Sizes / Rec. Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types. Can be used in all positions with pulsed welding equipment and good welding procedures.70 % 2. KR ABS. Weld Metal Composition Carbon Silicon Manganese Nickel Chromium Molybdenum SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2 T-S (psi) 84.2) (1.60 % 2. Carbon Silicon Manganese Nickel Chromium Molybdenum Typical Applications Characteristics Of Usage Designed for use on type 316 austenitic stainless steels.030 .877.052 1/16 (0.052 1/16 .40 % 2.9) (1.04 % 0.877.040 .02 % 0. Non-pulsed welding is more limited to flat and horizontal welding. Designed for use for type 316L grade stainless steel.2) (1.672 El 38 % El 38 % El 30 % IV (J) 32°F:100 IV (J) 32°F:90 IV (J) 0.9) (1.754.7935 MIG Wires Stainless Steel AWS ER316 M-316 AWS ER316L M-316L AWS ER316LSi Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types.10 % 18.89 % 11.8) (0.122 T-S (psi) 82. Parameters Welding of stainless steel of 18%Cr-12%Ni-Mo types (STS316). BV.80 % 18.6) 0. Designed for use on type 316 L and 316 grade austenitic stainless steels.122 T-S (psi) 84.02 % 0.30 % 0. DNV.40 % 1. Can be used in all positions with pulsed welding equipment and good welding procedures. Non-pulsed welding is more limited to flat and horizontal welding.9) (1.62 % 12.754.8) (0.040 .7935 Call Customer Service For Availability: 1. Non-pulsed welding is more limited to flat and horizontal welding.4) (1.2) (1.0) (1..045 .045 .Call Customer Service For Availability: 1.045 .035 .4) (1.030 .035 .4) (1.6) 32°F:110 -321 °F:40 Dia in (mm) (0. The low ferrite content improves the crack-resistance and corrosion resistance. Mechanical Properties M-316LSi Supplier.39 % 1.035 .0) (1. 2 The additional silicon greatly enhances wetting of the weld bead that enhances the cosmetics of the bead appearance when required..76 % 1. The alloy has particularly good corrosion-resistance and heat-resistance.0) (1. The high silicon content improves the welding properties. TUV Approved Packaging (0. flange.2) (1.035 .824 T-S (psi) 4.754.052 1/16 .9) (1.7935 Stainless Steel M-409Nb Welding of stainless alloys of the 18%Cr-9%Ni-Nb(Ti) types (STS 321.90 % 3.035 .30 % 0. etc.754.045 .7935 Call Customer Service For Availability: 1.8) (0.46 % 0.035 .8) (0.6) Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.40 % - exceed 750 °F.40 % 0. 347). IV (J) 0. Recommended for welding type 317 and 317L stainless steels with up to .0) (1. Carbon Silicon Manganese Nickel Chromium Niobium/Tantalum Welding of stainless alloys of the 19%Cr-12%Ni-3.7935 MIG Wires Call Customer Service For Availability: 1.6) Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures.8) (0.0) (1.02 % 0.48 % 1.45 % 0. (0. Welding of ferrite stainless alloys of the 13%Cr types (AISI409).Call Customer Service For Availability: 1.9) (1. Carbon Silicon Manganese Nickel Chromium Molybdenum SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2 T-S (psi) 92. bellows.36 % - (0.10 % 18.877.438 (1562°F) El 40 % El 41 % El 56 % IV (J) 0. .045 .030 .05 % 0.0) (1.824 T-S (psi) 92. 1. 2.040 .877. 1.030 . The higher Molybdenum content increases the resistance to pitting corrosion.60 % - Carbon Silicon Manganese Nickel Chromium Niobium/Tantalum IV (J) Dia in (mm) Dia in (mm) Dia in (mm) .. Approved Welding Positions Packaging Available Sizes / Rec.4) (1. 2.09 % 13.30 % 19.052 1/16 .052 1/16 (0.040 .2) (1.4) (1.045 . 2.24 % 9.877.5%Mo low carbon types (STS317. Parameters Typical Applications M-347 Characteristics Of Usage AWS ER409Nb Weld Metal Composition M-317L AWS ER347 Mechanical Properties AWS ER317L Supplier. Operating temperatures should not 1. It is suitable for automotive exhaust fabricators such as front pipe.04 % carbon in the weld deposit.754. The added Nb helps to form stable carbides that promote improved resistance to corrosion with stronger properties at elevated temperatures. shipbuilding and nuclear plant industries.9) (1. Nb component improves the resistance to intergranular corrosion of the weld metal. For The Highest Demands WELDING PRODUCTS 44 0. Various applications of chemical engineering.23 % 11.01 % 0.46 % 2. Designed for welding of grades 347 and 321 stabilized austenitic stainless steels. 317L).2) (1.4) (1.040 .030 ..6) Detailed Packaging Information Can be used in all positions with the use of pulsed welding equipment and proper welding procedures. This product was designed for welding Niobium stabilized stainless. 2. flange.040 . tapes and straight edges.320 T-S (psi) - T-S (psi) 73.7935 Call Customer Service For Availability: 1.030 .035 .030 .39 % 12.030 ..877.754.754.33 % 0.2) (1. dissimilar steels).7935 Stainless Steel M-430 Welding of martensite stainless alloys of the 13%Cr types (STS 420). erosion.9) (1.052 1/16 (0. Used in the application of welding similar alloys as well as for overlays and thermal spraying.6) Detailed Packaging Information (0. 410). It is suitable for automotive exhaust fabricators such as front pipe. 2. Parameters Typical Applications M-420 Characteristics Of Usage AWS ER430 Weld Metal Composition M-410 AWS ER420 Mechanical Properties AWS ER410 Supplier.44 % 16.8) (0.9) (1.969 El 35 % El - El 35 % Remark PWHT:1373 °F x 1hr 5%H2SO4 - Remark PWHT:1373 °F x 1hr 0.0) (1.035 . 410 and 416.33 % 0.7935 MIG Wires Call Customer Service For Availability: 1. Alloy 430 is a ferritic stainless which provides good ductility in heat-treated condition. scissors.8) (0. The alloy is suitable for the first layer of corrosion resistant weld claddings.754.045 . For The Highest Demands WELDING PRODUCTS 45 0.6) Detailed Packaging Information Approved Welding Positions Packaging Available Sizes / Rec. Carbon Silicon Manganese Nickel Chromium SG Ar+2 % O2 SG Ar+2 % O2 SG Ar+2 % O2 T-S (psi) 78. or abrasion.035 .0) (1.60 % (0.040 .877.052 1/16 .02 % 0.34 % 0. bellows. Welding of ferrite stainless alloys of the 17%Cr types (AISI 430. Alloy 410 is used to weld Types 403.70 % Dia in (mm) Dia in (mm) Dia in (mm) .052 1/16 . surgical and dental instruments. 3. 1.8) (0.. 1. A minimum of 300ºF before welding.2) (1.41 % 0.045 . Type 420 is a martensitic stainless steel that provides corrosion resistance similar to Type 410 plus increased strength and hardness 2. 1.877.02 % 0. The alloy is suitable for the first layer of corrosion resistant weld claddings. Carbon Silicon Manganese Nickel Chromium Carbon Silicon Manganese Nickel Chromium Welding of martensite stainless alloys of the 13%Cr types (STS 403.Call Customer Service For Availability: 1.4) (1.045 .2) (1.0) (1.80 % 0.37 % 12.4) (1.4) (1. 405. Alloy 410 is also used for welding overlay on carbon steels to resist corrosion.040 .9) (1.6) Detailed Packaging Information . Typical uses include cutlery. TIG Wires Mild Steel Stainless Steel WELDING PRODUCTS Supplier.. For The Highest Demands 46 .. 0) 5/32"(4.0) 39(1000) 39(1000) 39(1000) 39(1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec.54 % Manganese 1.08 % 0. titanium and aluminum in addition to the manganese and silicon deoxidizers. Preheat at 212° to 392 °F and post weld heat treatment at 1148 °F to 1328 °F.26 % Molybdenum 0. Carbon Silicon Manganese Titanium Aluminum Zirconium Y-P 71. excellent impact values and tensile strength. 3.25% Cr / 0. 2.0) 5/32"(4.. For welding of 1. Carbon 0. 2. For The Highest Demands WELDING PRODUCTS 47 F Amp V&OH 30-150 40-200 50-250 70-325 30-130 40-180 50-210 70-280 10# (5 kg) carton Detailed Packaging Information All Welding Positions . pipe.45 % Excellent wire for Tig or Mig welding of most grades of carbon steels.672 T-S (psi) 101. Produces superior quality welds with minimum porosity even over rust and mill scale. Ar gas is used for shielding.526 T-S (psi) 85.51 % Molybdenum 0.85 % Manganese 0.0) 39(1000) 39(1000) 39(1000) 39(1000) 1/16" (1.473 Y-P 72.04 % F Amp V&OH 30-150 40-200 50-250 70-325 30-130 40-180 50-210 70-280 10# (5 kg) carton Amp F 30-150 40-200 50-250 70-325 V&OH Dia in (mm) Length in (mm) 30-130 40-180 50-210 70-280 1/16" (1.4) 1/8" (3.07 % 0.572 El 29 % El 22 % El 26 % V-Notch 133 ft/lb @ -20 °F V-Notch 133 ft/lb @ -20 °F V-Notch 59 ft/lb @ 32 °F Dia in (mm) Length in (mm) Dia in (mm) Length in (mm) 1/16" (1.5 Mo heat resisting steels.08 % Carbon 0.TIG Wires Mild Steel T-80SB2 For use on carbon and low alloy steels such as 4130 when matching tensile strength or PWHT is required.07 % 0. 1. Multiple deoxidized rod containing small amounts of zirconium. Parameters Typical Applications T-80D2 Characteristics Of Usage AWS ER80S-B2 Weld Metal Composition T-70S2 AWS ER80S-D2 Mechanical Properties AWS ER70S-2 Supplier.0) 5/32"(4. offshore drilling rigs and structural steels.54 % 1.09 % Silicon 0.068 Y-P 88..519 T-S (psi) 82.50 % Chromium 1.6) 3/32" (2.4) 1/8" (3.0) 39(1000) 39(1000) 39(1000) 39(1000) 0.4) 1/8" (3.18 % 0. 1.6) 3/32" (2. Contains additional amounts of manganese and silicon which produces weld deposits with high ductility. 1.6) 3/32" (2. Gives high strength welds on high sulphur bearing steels or medium carbon steels. 2.63 % Silicon 0. Excellent mechanical and toughness properties after PWHT. 25% Cr.TIG Wires Mild Steel AWS ER90S-B3 Designed for welding 2.47 % Manganese 0..0) 39(1000) 39(1000) 39(1000) 39(1000) F 30-150 40-200 50-250 70-325 V&OH 30-130 40-180 50-210 70-280 10# (5 kg) carton Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec. Preheat at 300° to 570°F and post weld heat treatment at 1256° to 1346°F . 1% Mo alloy steels 1. 2. Excellent mechanical and toughness properties after PWHT. For The Highest Demands WELDING PRODUCTS 48 .Designed for single and multi-pass welding of 2. 1%Mo alloy steels. Carbon 0.09 % Silicon 0.25% Cr.66 % Chromium 2. Parameters Mechanical Properties Weld Metal Composition Characteristics Of Usage Typical Applications T90SB3 Supplier..4) 1/8" (3.771 T-S (psi) 97.175 El 26 % V-Notch 133 ft/lb @ 32°F Dia in (mm) Length in (mm) Amp 1/16" (1.0) 5/32"(4.0 % Y-P (psi) 79.31 % Molybdenum 1. 3.6) 3/32" (2. 01 % 0. 302.04 % Carbon 0. Duplex stainless steels are typically used in: 1.0) 1/8 (3.0) 39 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) .40 % 1.2) 5/32 (4.05 % Silicon 0. It provides better weldability together with excellent corrosion resistance.80 % Chromium 19.0) (1000) (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions ABS Supplier..877.2) 5/32 (4.38 % Silicon 0.2) 1/16 (1.42 % Manganese 1.06 % Nickel 9.75 % 8. Welding of high carbon 18%Cr-8%Ni stainless steels (AISI 304H).0) 39 39 39 39 39 39 Weight lb(kg) (1000) (1000) (1000) (1000) (1000) (1000) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 10# (5 kg) carton Dia in (mm) Length in (mm) Weight lb(kg) Dia in (mm) .2) 1/16 (1.045 (1. Oil and gas refining Carbon Silicon Manganese Nickel Chromium Molybdenum SG Ar SG Ar SG Ar T-S (psi) 118.0) 3/32 (2. Welding of 23%Cr-9%Ni-3%Mo stainless steels (UNS S31803.80 % - -321 °F:40 Dia in (mm) Length in (mm) . Sinks and kitchen appliances 2. Various applications of chemical engineering.4) 1/8 (3. transport and storage 2. food and pharmaceutical production 1.Call Customer Service For Availability: 1. It provides better weldability together with excellent corrosion resistance.6) 5/64 (2.80 % Nickel 9.045 (1. Product is designed primarily for welding of type 304H and and 347H austenitic stainless steels when high temperature services are required.6) 3/32 (2.6) 5/64 (2.70 % 22.80 % Carbon Chromium 19. Brewery.70 % 3.572 El 35 % El 42 % El 42 % IV (J) -51°F:136 IV (J) 32 °F:150 IV (J) Approved Welding Positions Packaging Available Sizes / Rec.20 % 0.122 T-S (psi) 85.6) 1/8 (3.0) 3/32 (2.90 % Manganese 2. 304 stainless steel are typically used in fabrication of: 1. For The Highest Demands WELDING PRODUCTS 49 Length in (mm) Weight lb(kg) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 12 (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions . shipbuilding and nuclear plant industries etc. Pulp & paper manufacturing equipment 0.754. Chemical processing.2) 5/32 (4.206 T-S (psi) 84.045 (1. dairy product equipment..2) 1/16 (1. STS 329J1/329J2L). 304). Parameters Typical Applications T-308H Characteristics Of Usage T-308 Weld Metal Composition T-2209 AWS ER308 Mechanical Properties AWS ER2209 3.7935 TIG Wires Stainless Steel AWS ER308H Welding of 18%Cr-8%Ni stainless steels (AISI 301. Cutlery and flatware 3. 2) 5/32 (4.80 % -321 °F:80 Dia in (mm) Length in (mm) . 3.0) 39 39 39 39 39 39 (1000) (1000) (1000) (1000) (1000) (1000) -321 °F:80 Weight lb(kg) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 10# (5 kg) carton Dia in (mm) Length in (mm) Weight lb(kg) Dia in (mm) Length in (mm) ..045 (1.95 % Manganese 1. Intended for service temperatures Typical Applications Characteristics Of Usage 304 stainless steel are typically used in fabrication of: 1. Welding of similar alloys in wrought or cast forms.6) 1/8 (3.2) 1/16 (1. TUV CWB Supplier. 1. 308L).122 T-S (psi) 88.045 (1.2) 1/16 (1.6) 3/32 (2.877. 0. 1.60 % Chromium 19. but with added silicon that greatly enhances wetting of the weld bead.Call Customer Service For Availability: 1.877.36 % Manganese 1. such as wetting.7935 Stainless Steel AWS ER308L T-308L AWS ER308LSi T-308LSi T-309 Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 304L.2) 1/16 (1.3 % Chromium 19..122 T-S (psi) 84. Brewery.02 % Carbon 0. 308L).0) 39 39 39 39 39 (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information Welding Positions Detailed Packaging Information All Welding Positions All Welding Positions Approved Packaging Available Sizes / Rec.0) 3/32 (2. This enhances the cosmetics of the bead appearance when required . Also used for overlay cladding of carbon and alloy steels.02 % Carbon 0.80 % Nickel 10.75 % Silicon 0.045 (1. dairy product equipment.2) 5/32 (4. DNV. such as 304L to mild steel or low alloy steels.7935 TIG Wires Call Customer Service For Availability: 1. Designed for use with most austenitic grades that normally use the 308 grade. The high silicon content improves the welding properties. It provides better weldability together with excellent corrosion resistance. Sinks and kitchen appliances 2.0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) .754.6) 3/32 (2.90 % Manganese 1.473 El 44 % El 43 % El 40 % IV (J) 32 °F:160 IV (J) 32 °F:180 IV (J) 32 °F:150 equipment below 600° F. Used for welding of carbon steel to stainless steels. Mechanical Properties AWS ER309 BV.0) 1/8 (3.2) 5/32 (4. food and pharmaceutical production Weld Metal Composition Carbon SG Ar SG Ar SG Ar T-S (psi) 84.38 % Silicon 0.05 % Silicon 0. 302. Parameters Welding of low carbon 18%Cr-8%Ni stainless steels (AISI 301. Cutlery and flatware 3. For The Highest Demands WELDING PRODUCTS 50 Weight lb(kg) (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions .0) 1/8 (3. KR.84 % Nickel 9. Welding of dissimilar steels.6) 5/64 (2. LR. 2. 304L.754.7 % Chromium 23.4 % Nickel 13. 572 T-S (psi) 79. KR Supplier. annealing covers and fire box sheets.7935 Call Customer Service For Availability: 1. Used on dissimilar welding.02 % Carbon 0.754. Welding of heat-resistant austenitic steels of the 25%Cr-20%Ni types(STS310S).6) 3/32 (2. furnace components.80 % Nickel 13.43 % Manganese 1. The low ferrite content improves the crack-resistance and corrosion-resistance. 1. 2.90 % Chromium 23.7935 TIG Wires Call Customer Service For Availability: 1.877.045 (1.70 % Nickel 20. Intended for service temperatures Carbon SG Ar SG Ar SG Ar T-S (psi) 85.045 (1.045 (1.75 % Silicon 0.20 % Chromium 26. such as wetting.754.0) 1/8 (3. The high silicon content improves the welding properties.2) 1/16 (1.0) 39 39 39 39 39 Approved Welding Positions Packaging Available Sizes / Rec.28 % Manganese 1.92 % Manganese 2.877. Parameters Typical Applications T-309LSi Characteristics Of Usage AWS ER310 Weld Metal Composition T-309L AWS ER309LSi Mechanical Properties AWS ER309L below 600°F.40 % Silicon 0. 2.877. 1. Used for welding of carbon steel to stainless steels. Welding of similar alloys in wrought or cast forms and clad side of type 304L clad steels. It has good general oxidation resistance.2) 1/16 (1. For The Highest Demands WELDING PRODUCTS 51 (1000) (1000) (1000) (1000) (1000) Weight lb(kg) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 10# (5 kg) carton Detailed Packaging Information All Welding Positions .10 % Silicon 0.60 % (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton (1000) (1000) (1000) (1000) (1000) Weight lb(kg) 11 (5) 11 (5) 11 (5 11 (5) 11 (5) 10# (5 kg) carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions BV.0) 1/8 (3. Silicon enhanced version of the 309L product that significantly improves the wetting out of the weld bead and base metal transitions.. 1.2) 1/16 (1.2) 5/32 (4. 0. Designed for welding of 310 stainless steels for high temperature applications. carbon to stainless and corrosion cladding applications.023 El 42 % El 42 % El 40 % IV (J) 32 °F:110 IV (J) 32 °F:120 IV (J) 32 °F:110 Dia in (mm) Length in (mm) Weight lb(kg) Dia in (mm) Length in (mm) Dia in (mm) Length in (mm) .754.0) 39 39 39 39 39 .2) 5/32 (4. LR.0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) . Typical uses include oven linings. DNV.20 % Chromium 23.7935 Stainless Steel T-310 Welding of austenitic stainless alloys of the 22%Cr-12%Ni low carbon types and for joining stainless steels to non-alloy or low-alloy steels.Call Customer Service For Availability: 1.73 % Nickel 13.2) 5/32 (4. 3. 2.6) 3/32 (2.771 T-S (psi) 87.01 % Carbon 0.0) 1/8 (3.. especially at high temperature. Also used for overlay cladding of carbon and alloy steels.6) 3/32 (2. Type 312 was originally designed to join high temperature heat resistant alloys as well as strength high alloy steels to themselves and some dissimilar metals 2.30 % -321 °F:50 Dia in (mm) Length in (mm) Weight lb(kg) Dia in (mm) Length in (mm) Weight lb(kg) Dia in (mm) Length in (mm) .0) 1/8 (3.2) 5/32 (4.10 % Silicon 0.62 % 12.6) 3/32 (2. BV.70 % 2.0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) .754.20 % 18.40 % 1.4 % - IV (J) 0.04 % 0.7935 TIG Wires Stainless Steel T-316L Welding of stainless steel of 18%Cr-12%Ni-Mo types (STS316).30 % -321 °F:50 0.6) 3/32 (2.Call Customer Service For Availability: 1. DNV. Wire is widely used for joining of dissimilar metals such as carbon steel to stainless steel. 312 can also be used to join some abrasion resistant steels. For The Highest Demands 52 ) 10# (5 kg) carton Detailed Packaging Information All Welding Positions ABS. Carbon SG Ar SG Ar SG Ar T-S (psi) 114.2) 5/32 (4.10 % 18.221 El 25 % El 40 % El 40 % IV (J) 32 °F:140 IV (J) 32 °F:150 Chromium 30. 0.045 (1. The alloy has particularly good corrosion-resistance and heat-resistance.0) 1/8 (3.877.0) 39 39 39 39 39 (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec.580 T-S (psi) 82.6) 3/32 (2.045 (1.877.43 % Manganese 1. The low ferrite content improves the crack-resistance and corrosion resistance.40 % 2. Designed for use on type 316 L and 316 grade austenitic stainless steels.2) 1/16 (1.2) 1/16 (1. Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types.02 % 0.7935 Call Customer Service For Availability: 1.39 % 1.73 % Nickel 8.. 1. Designed for use on type 316 austenitic stainless steels. LR.2) 5/32 (4..0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) .0) 1/8 (3.754.045 (1. TUV WELDING PRODUCTS Weight lb(kg) . Parameters Typical Applications T-316 Characteristics Of Usage AWS ER316L Weld Metal Composition T-312 AWS ER316 Mechanical Properties AWS ER312 (1000) (1000) (1000) (1000) (1000) Supplier.85 % 12.672 T-S (psi) 81.7 % Carbon Silicon Manganese Nickel Chromium Molybdenum Carbon Silicon Manganese Nickel Chromium Molybdenum Welding of stainless steel of the 29%Cr-9%Ni types.2) 1/16 (1. KR. 221 T-S (psi) 91.70 % 3. Welding of austenitic stainless alloys of the 18%Cr-12%Ni-Mo low carbon types.0) 39 39 39 39 39 (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions Supplier. Carbon Silicon Manganese Nickel Chromium Molybdenum SG Ar SG Ar SG Ar T-S (psi) 81.05 % 0.0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) .49 % 1.5%Mo low carbon types (STS317. Recommended for welding type 317 and 317L stainless steels with up to .2) 5/32 (4.85 % 12. 2..6) 3/32 (2. Welding of stainless alloys of the 18%Cr-9%Ni-Nb(Ti) types (STS 321. 347).2) 1/16 (1.045 (1.7935 TIG Wires Call Customer Service For Availability: 1.877.60 % -321 °F:36 Dia in (mm) Approved Welding Positions Packaging Available Sizes / Rec.10 % 18.6) 3/32 (2. For The Highest Demands WELDING PRODUCTS 53 0. Various applications of chemical engineering.30 % 0. shipbuilding and nuclear plant industries etc.754. The added Nb helps to form stable carbides that promote improved resistance to corrosion with stronger properties at elevated temperatures.02 % 0.754.46 % 2. The higher Molybdenum content increases the resistance to pitting corrosion..30 % 19.877.0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) .76 % 1.2) 5/32 (4.20 % 18. The additional silicon greatly enhances wetting of the weld bead that enhances the cosmetics of the bead appearance when required . 2.04% carbon in the weld deposit. 1.0) 1/8 (3. The high silicon content improves the welding properties. Nb component improves the resistance to intergranular corrosion of the weld metal.85 % 14.7935 Call Customer Service For Availability: 1. 1. 2. such as wetting.045 (1.877.2) 1/16 (1.2) 5/32 (4. Designed for use for type 316L grade stainless steel.40 % Carbon Silicon Manganese Nickel Chromium Molybdenum -321 °F:50 Carbon Silicon Manganese Nickel Chromium Niobium/Tantalum -321 °F:50 Length in (mm) Weight lb(kg) Dia in (mm) Length in (mm) Weight lb(kg) Dia in (mm) Length in (mm) .30 % 0. 1. Parameters Typical Applications T-317L Characteristics Of Usage AWS ER347 Weld Metal Composition T-316LSi AWS ER317L Mechanical Properties AWS ER316LSi Weight lb(kg) (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions . 317L).0) 1/8 (3.02 % 0.70 % 2.0) 1/8 (3.221 T-S (psi) 81.7935 Stainless Steel T-347 Welding of stainless alloys of the 19%Cr-12%Ni-3. This product was designed for welding 347 Niobium stabilized stainless.Call Customer Service For Availability: 1.2) 1/16 (1.374 El 40 % El 40 % El 40 % IV (J) 32 °F:150 IV (J) 32 °F:150 IV (J) 32 °F:90 0.24 % 9.045 (1.6) 3/32 (2.754. Typical uses include cutlery.2) 1/16 (1. The alloy is suitable for the first layer of corrosion resistant weld claddings. 1.6) 3/32 (2.33 % Manganese 0.877. Alloy 410 is used to weld Types 403.0) 1/8 (3. erosion. 410).0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) .44 % Nickel - Nickel - Nickel - Welding of martensite stainless alloys of the 13%Cr types (STS 403. flange.33 % Carbon 0. surgical and dental instruments. For The Highest Demands WELDING PRODUCTS 54 Chromium 16.877. 2.0) 1/8 (3.0) 1/8 (3. The alloy is suitable for the first layer of corrosion resistant weld claddings.0) 39 39 39 39 39 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton Detailed Packaging Information All Welding Positions . scissors.2) 5/32 (4.. It is suitable for automotive exhaust fabricators such as front pipe. 1. 1.41 % Silicon 0. Welding of ferrite stainless alloys of the 17%Cr types (ASI 430.Call Customer Service For Availability: 1. bellows.045 (1.Ferritic stainless which provides good ductility in heat-treated condition.7935 Call Customer Service For Availability: 1. Type 420 is a martensitic stainless steel that provides corrosion resistance similar to Type 410 plus increased strength and hardness 2.02 % Carbon 0. 0. Parameters Typical Applications T-420 Characteristics Of Usage AWS ER430 Weld Metal Composition T-41O AWS ER420 Mechanical Properties AWS ER410 Supplier.6) 3/32 (2. A minimum of 300ºF is recommended before welding. It is also used in the application of welding similar alloys as well as for overlays and thermal spraying.877. 2.2) 5/32 (4.870 T-S (psi) - T-S (psi) 72.02 % Silicon 0.754.0) 39 39 39 39 39 (1000) (1000) (1000) (1000) (1000) 10# (5 kg) carton (1000) (1000) (1000) (1000) (1000) Weight lb(kg) 11 (5) 11 (5) 11 (5) 11 (5) 11 (5) 10# (5 kg) carton Detailed Packaging Information All Welding Positions Detailed Packaging Information All Welding Positions Approved Welding Positions Packaging Available Sizes / Rec.80 % Chromium 12. 405.7935 TIG Wires Call Customer Service For Availability: 1.2) 5/32 (4.7935 Stainless Steel T-430 Welding of martensite stainless alloys of the 13%Cr types (STS 420). 410 and 416.60 % Dia in (mm) Length in (mm) Weight lb(kg) .045 (1.754.2) 1/16 (1. or abrasion. Carbon SG Ar SG Ar SG Ar T-S (psi) 76.37 % Manganese 0. 3.754.2) 1/16 (1.045 (1..70 % Dia in (mm) Length in (mm) Weight lb(kg) Dia in (mm) Length in (mm) . tapes and straight edges.39 % Manganese 0. Alloy 410 is also used for welding overlay on carbon steels to resist corrosion.6) 3/32 (2.34 % Silicon 0. dissimilar steels).519 El 37 % El - El 33 % Remark PWHT:1373 °F x 1hr IV(J) - Remark PWHT:1373 °F x 1hr Chromium 12. Packaging Information WELDING PRODUCTS Supplier... For The Highest Demands 55 . For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 56 Per Carton Per Pallet Total Weight 6 60 3.000 lbs (1361 kg) .0mm) 10# (5 kg) cartons 7/32” (5.Covered Electrodes Specific Product Packaging Information Detailed Packaging Information Return To Previous Page 3/32” (2.6mm) 10# (5 kg) cartons 1/4” (6.0mm) 10# (5 kg) cartons Pounds Metric Type 10 lb 5 kg Carton WELDING PRODUCTS Supplier.2mm) 10# (5 kg) cartons 5/32” (4.6mm) 10# (5 kg) cartons 1/8” (3...0mm) 10# (5 kg) cartons 3/16” (5. .0mm) 60# (27.4mm) x 60# (27.2 kg) coil 500# (227 kg) drum pack 3/32” (2.2 kg) coil 500# (227 kg) drum pack Per Pallet Total Weight Spool 72 2..2 kg) coil 500# (227 kg) drum pack 5/64” (2.2 kg) coil 500# (227 kg) drum pack 1/16” (1.045” (1.6mm) 33# (15 kg) spool 60# (27.376 lbs (1078 kg) 27 kg Coil 42 2. For The Highest Demands Return Page Return To To Previous Catalog Page 57 Per Carton .520 lbs (1145 kg) 249 kg Drum 2 1.2mm) 33# (15 kg) spool 60# (27.Tubular Wires Mild Steel AWS E70T-1 K-70T Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .100 lbs (500 kg) Pounds Metric Type 33 lb 15 kg 60 lb 500 lb WELDING PRODUCTS Supplier. 4 mm) x 60# (27.2 kg) coil 3/32” (2.520 lbs (1145 kg) Pounds Metric Type 33 lb 15 kg 60 lb 27 kg WELDING PRODUCTS Supplier..045” (1..376 lbs (1078 kg) Coil 42 2. For The Highest Demands Return Page Return To To Previous Catalog Page 58 Per Carton .2 mm) 33# (15 kg) spool 1/16” (1.Tubular Wires Mild Steel AWS E70T-5M K-70TB Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .6 mm) 60# (27.2 kg) coil Per Pallet Total Weight Spool 72 2. 2 mm) 33# (15 kg) spool . For The Highest Demands Return To Previous Page 59 Per Carton .520 lbs (1145 kg) Pounds Metric Type 33 lb 15 kg 60 lb 27 kg WELDING PRODUCTS Supplier..045” (1.Tubular Wires Mild Steel AWS E70T-1C/1M.6 mm) 60# (27.052” (1.376 lbs (1078 kg) Coil 42 2.4 mm) 33# (15 kg) spool 1/16” (1. 9C.2 kg) coil Per Pallet Total Weight Spool 72 2.. 9M K-70ST Specific Product Packaging Information Detailed Packaging Information Return To Previous Page . 6 mm) 60# (27.4 mm) 33# (15 kg) spool 1/16” (1.376 lbs (1078 kg) Coil 42 2.520 lbs (1145 kg) Pounds Metric Type 33 lb 15 kg 60 lb 27 kg WELDING PRODUCTS Supplier.Tubular Wires Mild Steel AWS E70T-1C/1M. 9C/9M KX-200H Specific Product Packaging Information Detailed Packaging Information Return To Previous Page . For The Highest Demands Return To Previous Page 60 Per Carton .2 mm) 33# (15 kg) spool ...045” (1.052” (1.2 kg) coil Per Pallet Total Weight Spool 72 2. 376 lbs (1078 kg) 27 kg Coil 42 2.4 mm) x 60# (27..Tubular Wires Mild Steel AWS E71T-1/-1M K-71TLF Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .2 kg) coil 500# (227 kg) drum pack 1/16” (1.2 kg) coil 500# (227 kg) drum pack 3/32” (2..2 mm) 33# (15 kg) spool 60# (27.2 kg) coil 500# (227 kg) drum pack 5/64” (2.6 mm) 33# (15 kg) spool 60# (27.520 lbs (1145 kg) 249 kg Drum 2 1.045” (1. For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 61 Per Carton .100 (500 kg) Pounds Metric Type 33 lb 15 kg 60 lb 500 lb WELDING PRODUCTS Supplier.2 kg) coil 500# (227 kg) drum pack Per Pallet Total Weight Spool 72 2.0 mm) 60# (27. .9 mm) 10# (4. For The Highest Demands Return Page Return To To Previous Catalog Page 62 Per Carton .2 kg) coil 500# (227 kg) drum pack .2 kg) coil 500# (227 kg) drum pack 1/16” (1.8 mm) 11# (5 kg).376 lbs (1078 kg) 44 lb 20 kg Spool 60 2..2 mm) 10# (4.045” (1.5 kg).5 kg 11 lb WELDING PRODUCTS Supplier.5 kg).640 lbs (1197 kg) 60 lb 27 kg Coil 42 2. 44# (20 kg) spool . 33# (15 kg) spool 60# (27. 33# (15 kg) spool .035” (0. 33# (15 kg) spool 60# (27.5 kg).6 mm) 10# (4.000 lbs (906 kg) 5 kg Spool 200 2. 33# (15 kg).2 kg) coil 500# (227 kg) drum pack Per Pallet Total Weight Spool 200 2.4 mm) 10# (4.100 lbs (500 kg) Pounds Metric Type 10 lb 4.Tubular Wires Mild Steel AWS E71T-1M K-71TM Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .200 lbs (1000 kg) 33 lb 15 kg Spool 72 2. 33# (15 kg) spool 60# (27.520 lbs (1145 kg) 500 lb 249 kg Drum 2 1.5 kg).052” (1.030” (0. 2 mm) 10# (4.Tubular Wires Mild Steel AWS E71T-1M K-71T Plus Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .5 kg).. For The Highest Demands Return To Previous Page 63 Per Carton .5 kg 33 lb WELDING PRODUCTS Supplier.2 kg) coil 500# (227 kg) drum pack 1/16” (1.5 kg).5 kg). 33# (15 kg) spool .2 kg) coil 500# (227 kg) drum pack Per Pallet Total Weight Spool 200 2.035” (0.100 lbs (500 kg) Pounds Metric Type 10 lb 4. 33# (15 kg) spool 60# (27.6 mm) 10# (4.000 lbs (906 kg) 15 kg Spool 72 2.520 lbs (1145 kg) 500 lb 249 kg Drum 2 1. 33# (15 kg) spool 60# (27.376 lbs (1078 kg) 60 lb 27 kg Coil 42 2..9 mm) 10# (4.045” (1. 035” (0. 33# (15 kg) spool 60# (27. 33# (15 kg) spool 60# (27.Tubular Wires Mild Steel AWS E71T-1M K-71TP Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .2 kg) coil 500# (227 kg) drum pack 1/16” (1..9 mm) 10# (4.100 lbs (500 kg) Pounds Metric Type 10 lb 4..5 kg 33 lb WELDING PRODUCTS Supplier.2 mm) 10# (4.6 mm) 10# (4.5 kg). For The Highest Demands Return To Previous Page 64 Per Carton .5 kg). 33# (15 kg) spool .000 lbs (906 kg) 15 kg Spool 72 2.5 kg).520 lbs (1145 kg) 500 lb 249 kg Drum 2 1.376 lbs (1078 kg) 60 lb 27 kg Coil 42 2.045” (1.2 kg) coil 500# (227 kg) drum pack Per Pallet Total Weight Spool 200 2. 5 kg).6 mm) 10# (4..5 kg 33 lb 15 kg WELDING PRODUCTS Supplier. 33# (15 kg) spool Per Pallet Total Weight Spool 200 2..Tubular Wires Self Shielded AWS E71T-GS K-NGS Specific Product Packaging Information Detailed Packaging Information Return To Previous Page . For The Highest Demands Return Page ReturnTo ToPrevious Catalog Page 65 Per Carton .052” (1.5 kg).5 kg). 33# (15 kg) spool 1/16” (1.376 lbs (1078 kg) Pounds Metric Type 10 lb 4.045” (1.4 mm) 10# (4.2 mm) 10# (4. 33# (15 kg) spool .000 lbs (906 kg) Spool 72 2. 376 lbs (1078 kg) .Tubular Wires Self Shielded AWS E70T-4 K-NGS4 Specific Product Packaging Information Detailed Packaging Information Return To Previous Page 1/16” (1.. For The Highest Demands Return Page ReturnTo ToPrevious Catalog Page 66 Per Carton Per Pallet Total Weight 72 2..6 mm) 33# (15 kg) spool Pounds Metric Type 33 lb 15 kg Spool WELDING PRODUCTS Supplier. 0 mm) 33# (15 kg) spool Per Pallet Total Weight Spool 200 2.045” (1. For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 67 Per Carton .376 lbs (1078 kg) Pounds Metric Type 10 lb 4..000 lbs (906 kg) Spool 72 2.Tubular Wires Self Shielded AWS E71T-10 K-NGS10 Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .5 kg)..5 kg).2 mm) 10# (4. 33# (15 kg) spool 5/64” (2.5 kg 33 lb 15 kg WELDING PRODUCTS Supplier. 33# (15 kg) spool 1/16” (1.6 mm) 10# (4. 6 mm) 10# (4.5 kg).045” (1.. 33# (15 kg) spool 1/16” (1.376 lbs (1078 kg) Pounds Metric Type 10 lb 4.Tubular Wires Self Shielded AWS E71T-11 K-NGS11 Specific Product Packaging Information Detailed Packaging Information Return To Previous Page . For The Highest Demands Return Page ReturnTo ToPrevious Catalog Page 68 Per Carton .5 kg 33 lb 15 kg WELDING PRODUCTS Supplier. 33# (15 kg) spool 5/64” (2.000 lbs (906 kg) Spool 72 2..5 kg).2 mm) 10# (4.0 mm) 33# (15 kg) spool Per Pallet Total Weight Spool 200 2. 4 mm) 10# (4.2 mm) 10# (4.5 kg 33 lb 15 kg WELDING PRODUCTS Supplier.Tubular Wires Metal Cored AWS E70C-3M KX-70CM Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .5 kg).. For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 69 Per Carton .000 lbs (906 kg) Spool 72 2. 33# (15 kg) spool 1/16” (1.376 lbs (1078 kg) Pounds Metric Type 10 lb 4.5 kg). 33# (15 kg) spool .5 kg).6 mm) 10# (4..045” (1. 33# (15 kg) spool Per Pallet Total Weight Spool 200 2.052” (1. 2 mm) 33# (15 kg) spool 1/16” (1.6 mm) 33# (15 kg) spool Pounds Metric Type 33 lb 15 kg Spool WELDING PRODUCTS Supplier.. For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 70 Per Carton Per Pallet Total Weight 72 2.Tubular Wires Metal Cored AWS E70C-3C KX-100 Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .376 lbs (1078 kg) ..045” (1. 4 mm) 10# (4.5 kg)...000 lbs (906 kg) Spool 72 2.6 mm) 10# (4.376 lbs (1078 kg) Pounds Metric Type 10 lb 4. 33# (15 kg) spool . 33# (15 kg) spool Per Pallet Total Weight Spool 200 2.045” (1. For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 71 Per Carton .5 kg).2 mm) 10# (4.Tubular Wires Metal Cored AWS E70C-6M KX-706M Specific Product Packaging Information Detailed Packaging Information Return To Previous Page . 33# (15 kg) spool 1/16” (1.5 kg).052” (1.5 kg 33 lb 15 kg WELDING PRODUCTS Supplier. 33# (15 kg) spool 1/16” (1.2 mm) 10# (4.5 kg).5 kg).Tubular Wires Metal Cored AWS E70C-6M KX-706M Plus Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .6 mm) 10# (4. 33# (15 kg) spool . 33# (15 kg) spool Per Pallet Total Weight Spool 200 2.4 mm) 10# (4.5 kg).5 kg 33 lb 15 kg WELDING PRODUCTS Supplier..052” (1.376 lbs (1078 kg) Pounds Metric Type 10 lb 4.045” (1.000 lbs (906 kg) Spool 72 2.. For The Highest Demands Return To Previous Page Per Carton . 045” (1.5 kg). 33# (15 kg) spool Per Pallet Total Weight Spool 200 2.5 kg 33 lb 15 kg WELDING PRODUCTS Supplier.000 lbs (906 kg) Spool 72 2. For The Highest Demands Return To Previous Page ReturnTo ToPrevious Catalog Page Return Page 73 Per Carton .5 kg)..2 mm) 10# (4.5 kg).4 mm) 10# (4.Tubular Wires Specific Product Packaging Information Detailed Packaging Information Metal Cored . 33# (15 kg) spool . 33# (15 kg) spool 1/16” (1.376 lbs (1078 kg) Pounds Metric Type 10 lb 4.052” (1.6 mm) 10# (4.. 6 mm) 33# (15 kg) spool Pounds Metric Type 33 lb 15 kg Spool WELDING PRODUCTS Supplier..Tubular Wires Specific Product Packaging Information Detailed Packaging Information Stainless Steel .376 lbs (1078 kg) . For The Highest Demands Return To Previous Page ReturnTo ToPrevious Catalog Page Return Page 74 Per Carton Per Pallet Total Weight 72 2.045” (1..2 mm) 33# (15 kg) spool 1/16” (1. 2 mm) x 33# (15 kg). 44# (20 kg) spool 550# (259 kg) and 900# (408 kg) drum pack ..100 lbs (500 kg) 900 lb 408 kg Drum 1 900 lbs (900 kg) WELDING PRODUCTS Supplier.030” (0. For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 75 .4 mm) x 33# (15 kg).200 lbs (1000 kg) 33 lb 15 kg Spool 72 2.MIG Wires Specific Product Packaging Information Detailed Packaging Information Return To Previous Page .0 mm) x 33# (15 kg).9 mm) x 11# (5 kg).8 mm) x 11# (5 kg). 33# (15 kg)..040” (1. 44# (20 kg) spool . 44# (20 kg) spool 550# (259 kg) and 900# (408 kg) drum pack Pounds Metric Type Per Carton Per Pallet Total Weight 11 lb 5 kg Spool 5 200 2.052” (1.640 lbs (1197 kg) 550 lb 249 kg Drum 2 1.376 lbs (1078 kg) 44 lb 20 kg Spool 60 2.6mm) x 33# (15 kg). 33# (15 kg). 44# (20 kg) spool 550# (259 kg) and 900# (408 kg) drum pack 1/16” (1.035” (0.045” (1. 44# (20 kg) spool 550# (259 kg) and 900# (408 kg) drum pack . 44# (20 kg) spool 550# (259 kg) and 900# (408 kg) drum pack . .0 mm) 10# (5 kg) cartons 7/32” (5.2 mm) 10# (5 kg) cartons 1/16" (1.0 mm) Detailed Packaging Information 10# (5 kg) cartons Pounds Metric Type 10 lb 5 kg Carton WELDING PRODUCTS Supplier.045” (1.000 lbs (1361 kg) .0 mm) 10# (5 kg) cartons 3/16” (5. For The Highest Demands ReturnTo ToPrevious Catalog Page Return Page 76 Per Carton Per Pallet Total Weight 6 60 3.4 mm) 10# (5 kg) cartons 1/8” (3.2 mm) 10# (5 kg) cartons 5/32” (4.6 mm) 10# (5 kg) cartons 1/4” (6.TIG Wires Specific Product Packaging Information Return To Previous Page ..6 mm) 10# (5 kg) cartons 3/32” (2. . For The Highest Demands 77 .Searchable ..Interactive Product Catalog WELDING PRODUCTS Supplier.