JPX01 MDF Product Description

JPX01 MDF V200R001C01Product Description Issue Date 02 2012-01-30 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: Email: http://www.huawei.com [email protected] Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd i JPX01 MDF Product Description 1 Product Positioning Contents 1 Product Positioning ...................................................................................................................... 1 2 Product Introduction .................................................................................................................... 2 2.1 Frame ............................................................................................................................................................... 2 2.1.1 Double-sided Frame ................................................................................................................................ 2 2.1.2 Single-sided Frame ................................................................................................................................. 4 2.2 Bracket ............................................................................................................................................................. 5 2.3 Terminal Block ................................................................................................................................................. 6 2.4 Protective Unit ................................................................................................................................................. 8 2.5 Accessories ..................................................................................................................................................... 10 2.5.1 IDC Tool ............................................................................................................................................... 11 2.5.2 Testing Cord .......................................................................................................................................... 11 2.5.3 Disconnection Plug ............................................................................................................................... 12 2.5.4 Labels .................................................................................................................................................... 13 2.5.5 Base....................................................................................................................................................... 16 3 Application Scenarios ................................................................................................................ 18 4 Performance Indices ................................................................................................................... 20 5 Standard Compliance ................................................................................................................. 24 6 Acronyms and Abbreviations ................................................................................................... 25 A Product Detail List ..................................................................................................................... 26 B Product Packing Detail List ...................................................................................................... 28 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd ii ........................................................................................... 8 Figure 2-6 JPX01 protective unit .................................................................. 11 Figure 2-12 JPX01-TC testing cord ........................................................................................................................................................................................................................................................................................... 5 Figure 2-4 JPX01 Terminal block.......................... 10 Figure 2-11 JPX01-DXD IDC tool .................................................... 12 Figure 2-13 JPX01 disconnection plug .......................................................................................................... 14 Figure 2-19 JPX01-NL-10 hinged label holder ........................................................................................................................................................................................................................................................................................................................................................................................................................ 7 Figure 2-5 Dimensions of the JPX01 terminal block ............................................................................................................................................................................................................. 12 Figure 2-14 JPX01 MDF label ................................................................................................................. 9 Figure 2-9 Dimensions of the JPX01 protective unit ......................................................................................................JPX01 MDF Product Description 1 Product Positioning Figures Figure 1-1 JPX01 products series ...... 14 Figure 2-18 Application schematic drawing of number flag ...................... 3 Figure 2-2 JPX-SF3D single-sided frame ................................. 14 Figure 2-17 JPX01 number flag ... 18 Figure 3-2 Application used in the outdoor cabinet ............................................................................................................................................................................... 10 Figure 2-10 Dimensions of the protective unit grounding bar ................................................................................ 1 Figure 2-1 JPX-F3D double-sided frame .................................................................................................................................................................................. 8 Figure 2-7 Grounding bar ...................................................................................................................................................................................................................... 19 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co............................................................................. 9 Figure 2-8 Application schematic drawing of grounding bar ... 16 Figure 3-1 Application used in the equipment room ................................. 4 Figure 2-3 JPX01 bracket ................................. Ltd iii .................................. 16 Figure 2-21 JPX01 MDF base ............. 15 Figure 2-20 Application schematic drawing of hinged label holder ......................................................................................... 13 Figure 2-15 JPX01-ML-10 module label holder ................... 13 Figure 2-16 Application schematic drawing of module label holder ......................................... .......... 17 Table 4-1 The performance indices of JPX01 products ............................................ 23 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co........................................................................ Ltd iv .......................................................................................................................... 3 Table 2-2 Specifications of JPX-SF3D single s-sided frame ..................... 9 Table 2-6 Specifications of the JPX01 protective unit ............................................................................................................................................................................................................................................... 20 Table 4-2 Electric capability indexes of JPX01-SPD1-G400T ................................................................ 5 Table 2-3 Specifications of the JPX01 bracket ....... 10 Table 2-7 Specifications of the JPX01-TC testing cord ......JPX01 MDF Product Description 1 Product Positioning Tables Table 2-1 Specifications of JPX-F3D double-sided frame ............................................................................................................................................... 22 Table 4-3 Electric capability indexes of JPX01-SPD1-G230F .......................................... 7 Table 2-5 Features of the JPX01 protective unit .................. 6 Table 2-4 Specifications of the JPX01 terminal block ........................................................................................................................................................................................ 12 Table 2-8 Specifications of JPX01 MDF base ..... testing and controlling the lines connectivity. It implements the termination and connection of external cables and exchange cables. JPX01 MDF supply the following accessorial equipment: protective unit. meeting the scenario requirement of the outside environment. JPX01 product is among the Huawei’s MDF product series. MDF products efficiently distribute.. protect and management the network cables (copper cables). As shown in Figure 1-1. to create a cable termination environment for ADSL or VDSL service. has the function of over-voltage and over-current protection. JPX01 MDF includes abundant types: double-sided frame and single-sided frame. testing cord and disconnection plug. meeting the scenario requirement of the inside environment. For ensure the signal is integrated.JPX01 MDF Product Description 1 Product Positioning 1 Product Positioning MDF (Main Distribution Frame) is the connection device between subscriber and exchange device. Figure 1-1 JPX01 products series Double-sided frame Single-sided frame Outdoor cabinet Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. installed in the outdoor cabinet. Ltd 1 . Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.1 Double-sided Frame Product Introduction JPX01 consists of frame. The cable side terminal blocks and exchange side terminal blocks are installed on the different sides of the double-sided frame.1. There are two models frame: double-sided frame and single-sided frame. protective unit and accessories (including IDC tool. The frame supplies installation carrier for the bracket and terminal block.2 m D: The column quantity is 2 Appearance of JPX-F3D double-sided frame is shown in Figure 2-1. disconnection plug. The cable side terminal block is vertically mounted on the front pillar and exchange side terminal block is horizontally mounted on the back beam. The product naming rules:  JPX: Mandatory product SN of MDF distribution product    F: Frame 3: The height is 2. terminal block. testing cord.JPX01 MDF Product Description 2 Product Introduction 2 2. labels and base). JPX01 double-sided frame has only one model available: JPX-F3D. bracket..1 Frame 2. Ltd 2 . Supports full front-operation for convenient maintenance.. Ltd 3 . Specifications Specifications of the JPX-F3D double-sided frame are shown in Table 2-1. Enough space for layout of the cables.JPX01 MDF Product Description 2 Product Introduction Figure 2-1 JPX-F3D double-sided frame Features     Constructed of metal frame structure. and the layout of the cables is orderly. Combined easily the left and right frames. easy to install and has good capability. Table 2-1 Specifications of JPX-F3D double-sided frame Model Dimensions (mm) HXWXD Cable tray height 200 External line Column Qty 2 Pair / column 100 X 7 Capacity (pair) 1400 Exchange line Row QTY 6 Pair / row 100 X 2 Capacity (pair) 1200 JPX-F3D 2200 X 500 X 800 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. JPX01 single-sided frame has only one model available: JPX-SF3D.JPX01 MDF Product Description 2 Product Introduction 2. The product naming rules:  JPX: Mandatory product SN of MDF distribution product    SF: Single frame 3: The height is 2.2 Single-sided Frame The cable side terminal blocks and exchange side terminal blocks are installed on the same side of the single-sided frame. Flexible installation modes meet the different scenarios requirement: combined easily the left and right frames.2 m D: The column quantity is 2 Appearance of JPX-SF3D single-sided frame is shown in Figure 2-2. back-to-back installation. installed in the corner. Supports the installation near the wall for meeting the requirement of small equipment office. Supports full front-operation for convenient maintenance.1. Ltd 4 . mounted alternately from the left side. easy to install and has good capability.. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. Figure 2-2 JPX-SF3D single-sided frame Features     Constructed of metal frame structure. Table 2-2 Specifications of JPX-SF3D single s-sided frame Model Dimensions (mm) HXWXD Cable tray height External line Column Qty 1 Pair / column 100 X 7 Capacity (pair) 700 Exchange line Column QTY 1 Pair / column 70 X 10 Capacity (pair) 700 JPX-SF3D 2200 X 500 X 600 200 2.. Specifications Specifications of the JPX-SF3D single-sided frame are shown in Table 2-2. The product naming rules:  JPX01: Product model SN for Huawei's MDF distribution product   BRK: Bracket 11: 11 installation positions.2 Bracket The bracket is used for installing the terminal block and fixing it on the frame. and the layout of the cables is orderly. 8: 8 installation positions Appearance of the JPX01 bracket is shown in Figure 2-3. Ltd 5 . JPX01 bracket has two models available: JPX01-BRK-11 and JPX01-BRK-8. Figure 2-3 JPX01 bracket Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.JPX01 MDF Product Description   2 Product Introduction The cable trough box on the bottom of the frame facilitates the layout of the cable. Enough space for layout of the cables. The layout of the cable is advisable and clear. JPX01 terminal block has two models available: JPX01-BLK1-10K and JPX01-BLK1-10B. They create a cable termination environment for external cable.   Specifications Specifications of the JPX01 bracket are shown in Table 2-3. the others is used for installing the terminal blocks. JPX01-BRK-8 has 8 installation positions for blocks: the first one is used for installing the module label holder. exchange cable and jumper. The product naming rules:  JPX01: Product model SN for Huawei's MDF distribution product     BLK: Block 1: Product model SN for terminal block product 10: The capability is 10-pair K: The IDC contact is switching contact. The ground wire is led to the frame grounding bar from the ground terminal of the downmost bracket. Ltd 6 . JPX01-BRK-11 has 11 installation positions for blocks: the first one is used for installing the module label holder.JPX01 MDF Product Description 2 Product Introduction Features   The bracket for stainless steel is strong and durable..3 Terminal Block Terminal blocks are the core parts for MDF. the others is used for installing the terminal blocks. the grounding fingers belonged the same column are serial connection from beginning to end. Each bracket has one grounding finger. To supply grounding protection. Table 2-3 Specifications of the JPX01 bracket Model JPX01-BRK-11 Dimensions H X W X D (mm) 248 X 104 X 50 Suitable for Frame JPX-F3D Suitable for Terminal Block Cable side terminal block Exchange side terminal block JPX-SF3D JPX01-BRK-8 150 X 104 X 50 JPX-SF3D Cable side terminal block Exchange side terminal block 2. B: the IDC contact is disconnection contact Appearance of the JPX01 terminal block is shown in Figure 2-4. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. It is usually used for the exchange side terminal block. Compatible with the IDC tool for Krone type. Flexible IDC technology: 45o insulation displacement connection. Specifications Specifications of the JPX01 terminal block are shown in Table 2-4. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. Ltd 7 .6 X 23. JPX01-BLK1-10K is switching contact.. JPX01-BLK1-10B is disconnection contact. Transmission performance meets the Category 5 standards.9 Dimensions of the JPX01 terminal block are shown in Figure 2-5. Table 2-4 Specifications of the JPX01 terminal block Model JPX01-BLK1-10K JPX01-BLK1-10B Dimensions L X H X D (mm) 126.4 X 40. It is usually used for the cable side terminal block.JPX01 MDF Product Description 2 Product Introduction Figure 2-4 JPX01 Terminal block JPX01-BLK1-10K switching contact block JPX01-BLK1-10B disconnection contact block Features       Capacity: 10-pair/block. Before you insert wire in maintenance. Full-front operation. you should remove the protective units of the adjacent ports. It has over-voltage and over-current protection capacity to protect the backward switching device. Figure 2-6 JPX01 protective unit Features Features of the JPX01 protective unit is shown in Table 2-5.JPX01 MDF Product Description 2 Product Introduction Figure 2-5 Dimensions of the JPX01 terminal block 2. F: Five point protection Appearance of the JPX01 protective unit is shown in Figure 2-6.. Ltd 8 .4 Protective Unit Protective unit is mainly used together with the cable side terminal block. The product naming rules:  JPX01: Product model SN for Huawei's MDF distribution product      SPD: Surge protective device 1: Product model SN for protective unit product G: Gas discharge tube 400: DC breakdown voltage is 400V. 230: DC breakdown voltage is 230V T: Three point protection. JPX01 protective unit have two models available: JPX01-SPD1-G400T and JPX01-SPD1-G230F. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. Ltd 9 . Electrical power cable connection protection. Grounding bar 3. Figure 2-7 Grounding bar Figure 2-8 Application schematic drawing of grounding bar 1. Cable side terminal block 2. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. Electrical power cable induction protection..JPX01 MDF Product Description 2 Product Introduction Table 2-5 Features of the JPX01 protective unit Model JPX01-SPD1G400T JPX01-SPD1G230F Over-voltage Protection Over-voltage component is the gas discharge tube:  Over-current Protection Without the over-current protection device Over-current component is high-speed and macromolecule PTCR (Positive Temperature Coefficient Resistor). As shown in Figure 2-7 and Figure 2-8 . Protective unit Specifications Specifications of the JPX01 protective unit are shown in Table 2-6. Protection Range Surge protection. Transmission Performance Supply VDSL2 service Supply ADSL service Strong ability for enduring current Many times for surge current impulsion  Matching with the grounding bar: each 10 pcs protective units matched with 1 pcs grounding bar. 4 X 13. Ltd 10 .5 Accessories JPX01 accessories cover IDC tool. testing cord.2 X 52 Dimensions of the JPX01 protective unit are shown in Figure 2-9. Figure 2-9 Dimensions of the JPX01 protective unit Dimensions of the protective unit grounding bar are shown in Figure 2-10. disconnection plug. labels and base. Figure 2-10 Dimensions of the protective unit grounding bar 2. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co..JPX01 MDF Product Description 2 Product Introduction Table 2-6 Specifications of the JPX01 protective unit Model JPX01-SPD1-G400T JPX01-SPD1-G230F Grounding bar 109 X 11.7 Dimensions L X H X D (mm) 9.7 X 23. 5. The product naming rules:  JPX01: Product model SN for Huawei's MDF distribution product  TC: Testing cord Appearance of the JPX01-TC testing cord is shown in Figure 2-12. Wire pulling-out hook and wire pressing-in fork equipped on the IDC tool can easily pull out and press in the wire. Figure 2-11 JPX01-DXD IDC tool Features   After the wire is terminated. the redundant wires are automatically cut off.JPX01 MDF Product Description 2 Product Introduction 2. The product naming rules:  JPX01: Product model SN for Huawei's MDF distribution product  DXD: Code name for Huawei's IDC tool product Appearance of the JPX01-DXD is shown in Figure 2-11.2 Testing Cord The testing cord is used to lead the signal to test equipment. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. 2. to implement cable connection or disconnection.. JPX01 testing cord only has one model available: JPX01-TC.5. JPX01 IDC tool only has one model available: JPX01-DXD. Ltd 11 . and test whether the signal between ports is connected.1 IDC Tool IDC tool is used to clamp the cable into the spring plate or pull out the cable from the spring plate. Figure 2-13 JPX01 disconnection plug Features   Each 100-pair disconnection contact blocks (JPX01-BLK1-10B) match 5 pcs disconnection plug automatically.2 X 14.g. Front-inserted.. ohmmeter). Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.3 Disconnection Plug The disconnection plug is used to disconnect the voice loop.2 X 60. A pair of red clips is connected to the internal line tester or telephone set. Front-inserted.6 5 2. Specifications Specifications of the JPX01 testing cord are shown in Table 2-7.JPX01 MDF Product Description 2 Product Introduction Figure 2-12 JPX01-TC testing cord Features    Remove the protective unit before you used the testing cord.5. Ltd 12 Issue 02 (2012-01-30) . Table 2-7 Specifications of the JPX01-TC testing cord Model JPX01-TC Dimensions Testing plug L X H X D (mm) Length for wire (m) 9. Appearance of the JPX01 disconnection plug is shown in Figure 2-13. A pair of black clips is connected to the external line tester (e. Figure 2-14 JPX01 MDF label The features of JPX01 MDF label is following:    Each frame matches 1 pcs MDF label automatically. It can be directly stuck to the corresponding groove of the identification board on top of the distribution frame. Module Label Holder The module label holder is used to identify the block information of the total bracket. JPX01 module label holder has only one model available: JPX01-ML-10. The JPX01 labels include MDF label. Appearance of the JPX01 MDF label is shown in Figure 2-14.JPX01 MDF Product Description  2 Product Introduction One JPX01 disconnection plug disconnects one voice loop. It is white words on blue background and self-adhesive..4 Labels The labels are use for identifying the information such as line order of block. 2. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. Ltd 13 . MDF Label The MDF label is used to identify the column of the cable side terminal block. module label holder. The product naming rules:  JPX01: Product model SN for Huawei's MDF distribution product   ML: Module label 10: Used for 10-pair terminal block Appearance of the JPX01 module label holder is shown in Figure 2-15. number flag and hinged label holder.5. Figure 2-15 JPX01-ML-10 module label holder The features of JPX01-ML-10 module label holder are following:  Each bracket matches 1 pcs module label holder. Figure 2-16 Application schematic drawing of module label holder Number Flag The number flag is used to identify the series number of each terminal block. Appearance of the JPX01 number flag is shown in Figure 2-17. Ltd 14 . Figure 2-18 Application schematic drawing of number flag Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. JPX01 number flag is installed in the one side of terminal block to identify the series number. The application of JPX01-ML-10 is shown in Figure 2-16.JPX01 MDF Product Description  2 Product Introduction JPX01-ML-10 is installed in the first installation position to identify the block information of the total bracket. The application of JPX01 number flag is shown in Figure 2-18. Figure 2-17 JPX01 number flag The features of JPX01 number flag are following:   Each 100-pair terminal blocks match 1 pcs number flag automatically..    The number flag could be used whether the block installed the protective unit. JPX01-NL-10 is installed in front of the terminal block to identify the terminal block information. JPX01 hinged label holder has only one model available: JPX01-NL-10. The application of JPX01-NL-10 hinged label holder is shown in Figure 2-20.JPX01 MDF Product Description 2 Product Introduction Hinged Label Holder The hinged label holder is used to identify each block information. But they are suitable for different condition. Ltd 15 . The hinged label holder is only used for the block without protective unit. They will not be used at one time.. The product naming rules:  JPX01: Product model SN for Huawei's MDF distribution product   NL: Number label 10: Used for 10-pair terminal block Appearance of the JPX01 hinged label holder is shown in Figure 2-19. Figure 2-19 JPX01-NL-10 hinged label holder The number flag and the hinged label holder are both used to identify the series number of each terminal block. Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. The features of JPX01-NL-10 hinged label holder is following:   Each terminal block matches 1 pcs hinged label holder. They have four models available: JPX202-FD-DZA. JPX202-FD-DZB. we could change the height of MDF through adjusting the base height. Ltd 16 Issue 02 (2012-01-30) . Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.. B: Product model SN for base product Appearance of the JPX01 MDF base is shown in Figure 2-21. Installation and operation is simple and easy. According the different subscriber requirement.5 Base The base is optional parts.JPX01 MDF Product Description 2 Product Introduction Figure 2-20 Application schematic drawing of hinged label holder 2. JPX202-SFD-DZB. It is the support parts of ground-mount MDF. SFD: 2-column single frame DZ: Code name for Huawei's base product A. Figure 2-21 JPX01 MDF base Features    The steel frame body is high intensity and anticorrosion. The height is adjustable for convenient use. JPX01 MDF base and JPX202 base is common. The product naming rules:  JPX202: Product model SN for Huawei's MDF distribution product    FD: 2-column frame. JPX202-SFD-DZA.5. Ltd 17 .JPX01 MDF Product Description 2 Product Introduction Specifications Specifications of the JPX01 MDF base are shown in Table 2-8. Table 2-8 Specifications of JPX01 MDF base Model Dimensions H X W X D(mm) Pitch JPX202-FD-DZA 10 Adjusting range for H 180-320 (Without gasket) 185-325 (With gasket) JPX202-FD-DZB 10 330-610 (Without gasket) 335-615 (With gasket) JPX202-SFD-DZA 10 180-320 (Without gasket) 185-325 (With gasket) JPX202-SFD-DZB 10 330-610 (Without gasket) 335-615 (With gasket) 500 X 590 JPX-SF3D single-sided frame WXD 500 X 790 JPX-F3D double-sided frame Suitable for Frame Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.. Ltd 18 . The application of JPX01 products is shown in Figure 3-1 and Figure 3-2. It cooperates with Huawei’s MA5600T to provide xDSL service. and in the outdoor cabinet. Figure 3-1 Application used in the equipment room Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.JPX01 MDF Product Description 3 Application Scenarios 3 Application Scenarios JPX01 provides cable termination environment for the connection between the external cables and switching equipment.. It can be deployed in the new or expansion project. remote office and residential equipment room). JPX01 can be used both in the equipment room (including the central office. Ltd 19 .JPX01 MDF Product Description 3 Application Scenarios Figure 3-2 Application used in the outdoor cabinet Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.. JPX01 MDF Product Description 4 Performance Indices 4 Table 4-1 The performance indices of JPX01 products Performance Indices Parameter Value Operating Condition Application class Operating temperature Storage temperature Relative humidity Atmospheric pressure Material Flammability Environment protection Plastic parts Protective unit Class V-0 Meet RoHS requirement PC-FR Grounding bar Over-voltage component Over-current component Cu H62-Y2 GDT PTCR Class 3. K.12 ITU/T Rec. Standard Compliance ETS 300019-1-3 ----- UL94 -UL94 V-0 -ITU/T Rec. Ltd 20 .. K.30 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.3 -25℃ to +65℃ -40℃ to +70℃ 8％ to 100％ 70-106 kPa Performance Indices The performance indices of JPX01 products are shown in Table 4-1. Environmental Adaptability Temperature variation High temperature environment Temperature / humidity cycles Vibration 100 cycles × 1 h @ -40℃ / +70℃ 500 h @ +70℃ IEC 11801 IEC 11801 -IEC 11801 IEC 11801 --YD/T 694-2004 21 cycles × 24 h @ +25℃ / +65℃ / -10℃ / 93% RH IEC 11801 20 cycles × 105 min/axis @ 1. 10-55 Hz IEC 11801 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. Ltd 21 .0 mm.5 mm ≥ 10 N @ 0.JPX01 MDF Product Description 4 Performance Indices Performance Indices Block Parameter Value ID termination material Surface finishes Tin-phosphor bronze QSn6. Maximum change in protector/block contact resistance is less than 3 mΩ..4-0.4 mm) ≥ 100 ≥ 750 ≥ 50 N @ 0.5 mm Repeated insertion/withdrawals: 200 cycles from fully inserted to intermediate position.5 Nickel-plate.65 mm (Insulation diameter ≤ 1. local Gild (Au) RAL9010 (ID bracket) RAL7035 (Pedestal) Protective unit Testing cord RAL 7035 RAL 7035 Standard Compliance ---- Color Block --- Mechanical Capability Block Solid wire diameter range Number of wire terminations Number of plugging Transverse extraction force Longitudinal extraction force Endurance 0. The detailed indexes are shown in Table 4-2 and Table 4-3.JPX01 MDF Product Description 4 Performance Indices Performance Indices Parameter Value Standard Compliance Electric Capability Block Resistance of disconnection contact IDC contact resistance Insulation resistance Dielectric strength Protective unit ≤ 7 mΩ YD/T694-2004 ≤ 3 mΩ ≥ 1000 MΩ @ 500 V ±50 V DC Without breakdown or arc@ 45-60 Hz. K. 50 Hz 10 times @ 5 A applications each line side. Ltd 22 . K.20 ITU/T Rec. K. 10/1000 µs 5 times of each polarity @ 2 kA (total current through center electrode). 5 times @ 1 min intervals.. 3 min intervals. K. Transmission Capability Transmission performance Class D IEC 11801 Table 4-2 Electric capability indexes of JPX01-SPD1-G400T Electric Capability DC breakdown voltage Insulation resistance Capacity (line to earth) Impulse breakdown voltage Parameter Value 350-500 V @ 100 V/s ≥ 1000 MΩ @ 100 V DC ≤ 20 pF @ 1 MHz.5 V ≤ 800 V @ 100V/µs ≤ 950 V @ 1 kV/µs AC surge AC discharge Impulse discharge current 600 V AC. 50 Hz 300 times (alternating polarity) @ 100 A. 600 VAC. AC 1000V. 1min YD/T694-2004 YD/T694-2004 IEC 60189-3 -- Electric capabilities for the two models protective unit are very different. 0.12 YD/T 694-2004 -ITU/T Rec. 8/20 µs Failure action time ≤ 15s @ 2A (1 A × 2). 50 Hz -ITU/T Rec.12 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. 1s.12 YD/T 694-2004 Standard Compliance ITU/T Rec. JPX01 MDF Product Description 4 Performance Indices Table 4-3 Electric capability indexes of JPX01-SPD1-G230F Electric Capability DC breakdown voltage Insulation resistance Capacity (line to earth) Impulse breakdown voltage Parameter Value 200 .20 ITU/T Rec.1 A.1 A. K.5 V ≤ 600 V @ 100 V/µs ≤ 700 V @ 1 kV/µs PTCR room-temperature resistance Hold current Over-current operating characteristic ≤ 22 Ω 120 mA @ +40℃.1 A. 1s. Ltd 23 .12 YD/T 694-2004 -ITU/T Rec.1 A. 8/20 µs Failure action time ≤ 15s @ 2A (1 A × 2). 5 times @ 1 min intervals.35-0. 25℃ ≤ 0. 25℃ AC surge AC discharge Impulse discharge current 600 VAC. 1 h ≤ 40s @ 0.300 V @ 100 V/s ≥ 1000 MΩ @ 100 V DC ≤ 20 pF @ 1 MHz.. 25℃ ≤ 15s @ 0. K. 25℃ < 2s @ 1-0.5-0. 600 V AC. 0. K. K.3s @ 3-0. 50 Hz 300 times (alternating polarity) @ 100 A. 50 Hz -ITU/T Rec.12 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. 50 Hz 10 times @ 5 A applications each line side.12 YD/T 694-2004 YD/T 694-2004 YD/T 694-2004 YD/T 694-2004 Standard Compliance ITU/T Rec. 10/1000 µs 5 times of each polarity @ 2 kA (total current through center electrode). 3 min intervals. C.C. Part 3: Equipment wires with solid or stranded conductor.20 ITU/T Rec. sheath.12 ITU-T K.Basic Recommendation Resistibility of access network equipment to overvoltages and overcurrents Low-frequency cables and wires with P.V. pairs and triples Environmental Testing National Standard YD/T 694-2004 “Main Distribution Frame” and “Rules for Enforcement on Quality Authentication and Inspection of MDF Homologation” Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.Part 1-3: Classification of environmental conditions.44 ITU/T K. stationary use at weatherprotected locations Test for Flammability of Plastic Materials for Parts in Devices and Appliances Information technology . K.V.JPX01 MDF Product Description 5 Standard Compliance 5 International Standard ETS 300019-1-3 UL94 V-0 IEC 11801 ITU-T K. in singles.11 ITU-T K. PVC insulated. Ltd 24 ..30 ITU/T K.Generic cabling for customer premises Principles of protection against overvoltages and overcurrents Characteristics of gas discharge tubes for the protection of telecommunications installations Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents Positive temperature coefficient (PTC) thermistors Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents .45 IEC 60189-3 IEC 60068 Standard Compliance Environmental conditions and environmental tests for telecommunications equipment . insulation and P. Ltd 25 .JPX01 MDF Product Description 6 Acronyms and Abbreviations 6 AC ADSL DC GDT IDC MDF PC PTCR VDSL Acronyms and Abbreviations Full name in English Alternating Current Asymmetric Digital Subscriber Line Direct Current Gas Discharge Tube Insulation Displacement Connection Main Distribution Frame Polycarbonate Positive Temperature Coefficient Resistor Very High Speed Digital Subscriber Line Abbreviation in English Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.. or installing the cable side terminal block on the JPX-SF3D JPX01-BRK-8 8 installation position: one is used for the module label holder. Ltd 26 . seven are used for the terminal blocks Used for installing the exchange side terminal block on the JPXSF3D Terminal block JPX01-BLK1-10K 10-pair/block Usually used for the cable side terminal block JPX01-BLK1-10B 10-pair/block Usually used for the exchange side terminal block Protective unit JPX01-SPD1-G400T JPX01-SPD1-G230F Gas discharge tube. Supply ADSL service Each 100-pair disconnection contact blocks (JPX01-BLK1-10B) match 5 pcs disconnection plug automatically Each frame matches 1 pcs MDF label automatically IDC tool Testing cord Disconnection plug MDF label JPX01-DXD JPX01-TC - Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co. Supply over-voltage and over-current protection. ten are used for the terminal blocks Used for installing the exchange side and cable side terminal block on the JPX-F3D. Supply over-voltage protection.JPX01 MDF Product Description A Product Detail List A Name Double-sided frame Single-sided frame Bracket Model JPX-F3D JPX-SF3D JPX01-BRK-11 Remark Product Detail List External line capacity: 1400.. Exchange line capacity: 1200 External line capacity: 700. Exchange line capacity: 700 11 installation position: one is used for the module label holder. Supply VDSL2 service Gas discharge tube. Ltd 27 .JPX01 MDF Product Description A Product Detail List Name Module label holder Number flag Hinged label holder MDF Base Model JPX01-ML-10 JPX01-NL-10 JPX202-FD-DZA JPX202-FD-DZB JPX202-SFD-DZA JPX202-SFD-DZB Remark Each bracket matches 1 pcs module label holder Each 100-pair terminal blocks match 1 pcs number flag automatically Each terminal block matches 1 pcs hinged label holder H adjustable range: 180-325 mm H adjustable range: 330-615mm H adjustable range: 180-325 mm H adjustable range: 330-615 mm Suitable for JPX-SF3D frame Suitable for JPX-F3D frame Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.. 2 580 X 465 X 165 540 X 322 X 214 8 Box packing 15.3 18.7 17 200 X 520 X 610 570 X 340 X 295 367 X 302 X 320 367 X 302 X 253 Wooden box packing Packing Qty. Each carton has 4 grounding strips in it..5 200 X 520 X 810 Issue 02 (2012-01-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co.2 16.8 18 13.) 120/box (1/packge X 120 packges) 1/box 1/box 1/box 1/box JPX01-TC JPX202-FD-DZA JPX202-FD-DZB JPX202-SFD-DZA JPX202-SFD-DZB 120g 14.94 6.2 g 66 57 356 g 276 g 55 g (pcs) 1/box 1/box 20/box 20/box 240/box Product Packing Detail List Packing Gross Weight (kg) 87 2360 X 530 X 290 78 7.2 15.5 13.15 16. Ltd 28 .JPX01 MDF Product Description B Product Packing Detail List B Model Net Weight (kg) JPX202-F3D JPX202-SF3D JPX01-BRK-11 JPX01-BRK-8 JPX01-BLK1-10K JPX01-BLK1-10B JPX01-SPD1-G400T JPX01-SPD1-G230F 4. Packing Size H X W X D (mm) Remark (20/carton X 12 cartons) 1200/box (40/carton X 30 cartons.