ISO UpdateSupplement to ISOfocus February 2017 International Standards in process ISO/DTR Measurement of fluid flow by means of 15377 pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and An International Standard is the result of an agreement between Venturi tubes beyond the scope of ISO 5167 the member bodies of ISO. A first important step towards an Interna- tional Standard takes the form of a committee draft (CD) - this is cir- TC 34 Food products culated for study within an ISO technical committee. When consensus ISO/CD 20667 Milk — Determination of acetone content by has been reached within the technical committee, the document is continuous flow analyzer sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the ISO/CD 20668 Milk — Determination of beta-hydroxybutyric member bodies casting a vote. A confirmation vote is subsequently acid content by continuous flow analyzer carried out on a final draft International Standard (FDIS), the approval TC 38 Textiles criteria remaining the same. ISO/CD 20852 Textiles — Determination of the total heat transfer through textiles in simulated environments TC 42 Photography ISO/DTR Imaging materials — Pictorial color reflection 18945 prints — Comparison of image degradation observed between ISO 18930 accelerated CD registered TC 43 weathering test method and outdoor exposure Acoustics ISO/CD Acoustics — Screens furniture and single ob- 20189-1 jects intended for interior use — Part 1: Rating Period from 01 January to 31 January 2017 of sound absorption and sound reduction of These documents are currently under consideration in the technical elements based on laboratory measurements committee. TC 61 Plastics They have been registred at the Central Secretariat. ISO/CD 6721-1 Plastics — Determination of dynamic mechani- cal properties — Part 1: General principles TC 10 Technical product documentation ISO/CD 6721-2 Plastics — Determination of dynamic mechani- ISO/CD Technical product documentation (TPD) — cal properties — Part 2: Torsion-pendulum 20719-1 Technical product data set and presentation method of 3D annotated models — Part 1: General ISO/CD 6721-4 Plastics — Determination of dynamic mechani- principles and terms cal properties — Part 4: Tensile vibration — Non-resonance method TC 17 Steel ISO/CD 6721-5 Plastics — Determination of dynamic mechani- ISO/CD 5948 Railway rolling stock material — Ultrasonic ac- cal properties — Part 5: Flexural vibration — ceptance testing Non-resonance method TC 20 Aircraft and space vehicles ISO/CD 6721-6 Plastics — Determination of dynamic mechani- ISO/CD 9206 Aerospace series — Constant displacement cal properties — Part 6: Shear vibration — hydraulic motors — General specifications Non-resonance method ISO/CD 23041 Space systems — Unmanned spacecraft op- ISO/CD 6721-7 Plastics — Determination of dynamic mechani- erational procedures — Documentation cal properties — Part 7: Torsional vibration — Non-resonance method TC 22 Road vehicles ISO/CD 20934 Fuse-links with axial terminals for use in 48V TC 76 Transfusion, infusion and injection, and networks — Type SFxx-48V blood processing equipment for medi- cal and pharmaceutical use TC 23 Tractors and machinery for agriculture and forestry ISO/CD Prefilled syringes — Part 6: Plastic barrels 11040-6 for injectables and sterilized subassembled ISO/CD 21191 Equipment for Crop Protection — Closed syringes ready for filling Chemical Transfer Systems (CTS) — Perfor- mance Specification TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/CD 7714 Agricultural irrigation equipment — Volumet- ric valves — General requirements and test ISO/CD 20046 Radiological protection - Performance criteria methods for laboratories using fluorescence in Situ Hybridization (FISH) translocation assay for as- ISO/CD 9644 Agricultural irrigation equipment — Pressure sessment of overexposure to ionizing radiation losses in irrigation valves — Test method ISO/CD In-service inspections for primary coolant cir- ISO/CD 9912-4 Agricultural irrigation equipment — Filters for 20890-1 cuit components of light water reactors — Part microirrigation — Part 4: Granulated media 1: Mechaniyed ultrasonic testing filters ISO/CD In-service inspections for primary coolant TC 30 Measurement of fluid flow in closed 20890-2 circuit components of light water reactors — conduits Part 2: Magnetic particle testing and penetrant ISO/DTR 3313 Measurement of fluid flow in closed conduits testing — Guidelines on the effects of flow pulsations ISO/CD In-service inspections for primary coolant cir- on flow-measurement instruments 20890-3 cuit components of light water reactors — Part 3: Hydrostatic testing ISO Update, Supplement to ISO Focus -- February 2017 1 ISO/CD In-service inspections for primary coolant cir- ISO/CD 22390 Timber structures — Laminated veneer lumber 20890-4 cuit components of light water reactors — Part — Structural properties 4: Visual testing TC 172 Optics and photonics ISO/CD In-service inspections for primary coolant ISO/CD 9345 Microscopes — Interfacing dimensions for 20890-5 circuit components of light water reactors — imaging components Part 5: Eddz current testing of steam generator heating tubes ISO/CD Microscopes — Definition and measurement 19056-2 of illumination properties — Part 2: Illumination ISO/CD In-service inspections for primary coolant cir- properties related to the color in bright field 20890-6 cuit components of light water reactors — Part light microscopy 6: Radiographic testing ISO/CD 16672 Ophthalmic implants — Ocular TC 107 Metallic and other inorganic coatings endotamponades ISO/CD Zinc coatings — Guidelines and recommenda- ISO/DTR Ophthalmic optics — Spectacle lenses — 14713-2 tions for the protection against corrosion of 20772 Short wavelength visible solar radiation and iron and steel in structures — Part 2: Hot dip the eye galvanizing TC 174 Jewellery TC 108 Mechanical vibration, shock and condi- tion monitoring ISO/CD 8654 Colours of gold alloys — Definition, range of colours and designation ISO Mechanical vibration and shock — Hand-arm 10819:2013/ vibration — Measurement and evaluation of the TC 190 Soil quality CD Amd 1 vibration transmissibility of gloves at the palm ISO/CD 21226 Soil quality — Guideline for the screening of of the hand — Amendment 1 soil polluted with toxic elements using soil TC 113 Hydrometry magnetometry ISO/CD 1070 Liquid flow measurement in open channels — TC 192 Gas turbines Slope-area method ISO/CD 10494 Gas turbines and gas turbine sets — Measure- TC 126 Tobacco and tobacco products ment of emitted airborne noise — Engineering/ survey method ISO/CD 21160 Cigarettes — Determination of selected car- bonyls in the mainstream smoke of cigarettes TC 193 Natural gas — Method using High Performance Liquid ISO/CD 20676 Natural gas — Upstream area — Determination Chromatography of hydrogen sulfide content by laser absorption ISO/CD 21330 Cigarettes — Determination of selected volatile spectroscopy organic compounds in the mainstream smoke TC 198 Sterilization of health care products of cigarettes — Method using GC-MS ISO/DTS Guidance on aspects of a risk-based approach TC 130 Graphic technology 19930 to assuring sterility of terminally-sterilized, ISO/CD 19302 Graphic technology — Colour conformity as- single-use health care products sessment of printed products TC 202 Microbeam analysis ISO/CD Graphic technology — File format for quality ISO/CD 20720 Microbeam analysis - Methods of the specimen 20616-2 control and metadata — Part 2: Print quality preparation for analysis of general powders exchange (PQX) using WDS and EDS TC 131 Fluid power systems TC 204 Intelligent transport systems ISO 19973- Pneumatic fluid power — Assessment of com- ISO/CD 19414 Intelligent transport systems — Service archi- 2:2015/CD ponent reliability by testing — Part 2: Direc- tecture of probe vehicle systems Amd 1 tional control valves — Amendment 1 ISO/CD 20035 Intelligent transport systems — Cooperative ISO/CD 10763 Hydraulic fluid power — Plain-end, seamless adaptive cruise control (CACC) — Operation, and welded precision steel tubes — Dimen- performance and verification requirements sions and nominal working pressures ISO/DTR Intelligent transport systems — Framework for ISO/CD 2942 Hydraulic fluid power — Filter elements — Veri- 20529-1 green ITS (G-ITS) standards — Part 1: General fication of fabrication integrity and determina- information and use cases definition tion of the first bubble point TC 215 Health informatics TC 134 Fertilizers and soil conditioners ISO/CD 13120 Health informatics — Syntax to represent the ISO/CD 20977 Determination of size distribution by dry and content of healthcare classification systems — wet sieving Classification Markup Language (ClaML) TC 146 Air quality ISO/DTS Health Informatics — Terminology resource ISO/CD Interior air of road vehicles — Part 8: Handling 21564 map quality measures (MapQual) 12219-8 and packaging of materials and components TC 228 Tourism and related services for emissions testing ISO/CD 20611 Adventure tourism — Sustainability good prac- TC 147 Water quality tices — Requirements and recommendations ISO/CD Water quality — Determination of cyclic volatile ISO/CD 21426 Tourism and related services — Medical spa — 20596-2 methylsiloxanes in water — Part 2: Method Service requirements using liquid-liquid extraction with gas chroma- tography-mass spectrometry (GC-MS) TC 282 Water reuse TC 161 Controls and protective devices for gas ISO/CD 20670 Water reuse — Terminology and/or oil TC 292 Security and resilience ISO/CD Safety and control devices for gas burners and ISO/CD 22320 Security and resilience — Emergency manage- 23551-4 gas-burning appliances — Particular require- ment — Guidelines for incident response ments — Part 4: Valve-proving systems for ISO/CD 22327 Security and resilience — Emergency manage- automatic shut-off valves ment — Community-based landslide early TC 165 Timber structures warning system 2 ISO Update, Supplement to ISO Focus -- February 2017 TC 301 Energy management and energy They have been submitted to the ISO member bodies for voting by savings the date shown. ISO/CD 50044 Energy Savings Evaluation — Economics and * Available in English only financial evaluation of energy saving projects JTC 1 Information technology ISO/IEC PDTR Information technology — Internet of things Vote 22417 (IoT) use cases terminates ISO/IEC CD Software and systems engineering — Tools 26552 and methods for product line architecture TC 2 Fasteners design ISO/DIS 898-3 * Mechanical properties of fasten- ISO/IEC CD Information technology — Software and ers made of carbon steel and 26553 systems engineering — Tools and methods for alloy steel — Part 3: Washers 2017-04-20 product line realization ISO/IEC CD Information technology — Software and TC 4 Rolling bearings 26556 systems engineering — Tools and methods for ISO/DIS 5593 * Rolling bearings — Vocabulary product line organizational management ISO/IEC CD Software and systems engineering — Tools 2017-04-10 26560 and methods for product line product management (Revision of ISO 5593:1997, ISO 5593:1997/Amd 1:2007) ISO/IEC PDTS Information technology — Process assessment 33073 — Process capability assessment model for TC 6 Paper, board and pulps quality management ISO/DIS 20494 * Paper — Requirements for ISO/IEC CD Information technology — Security techniques stability for general graphic 20009-3 — Anonymous entity authentication — Part applications 2017-04-14 3: Mechanisms based on blind signatures concepts TC 8 Ships and marine ISO/IEC PDTS Information technology — Security techniques technology 20540 — Guidelines for testing cryptographic mod- ISO/DIS 17339 * Ships and marine technology — ules in their operational environment Life saving and fire protection ISO/IEC CD Information technology — Security techniques — Sea anchors for survival craft 2017-04-11 20543 — Test and analysis methods for random bit and rescue boats generators within ISO/IEC 19790 and ISO/IEC (Revision of ISO 17339:2002) 15408 TC 12 Quantities and units ISO/IEC CD Information technology — Security techniques 24761 — Authentication context for biometrics ISO/DIS * Quantities and units — Part 9: 80000-9 Physical chemistry and molecu- ISO/IEC CD Information technology — Automatic identifica- lar physics 2017-03-28 29167-21 tion and data capture techniques — Part 21: Air interface for security services crypto suite (Revision of ISO 80000-9:2009, SIMON ISO 80000-9:2009/Amd 1:2011) ISO/IEC CD Information technology — Automatic identifica- ISO/DIS * Quantities and units — Part 11: 29167-22 tion and data capture techniques — Part 22: 80000-11 Characteristic numbers Air interface for security services crypto suite 2017-03-28 SPECK ISO/IEC PDTR Information technology — Concepts and usage (Revision of ISO 80000-11:2008) 19583-21 of metadata — Part 21: SQL Implementation TC 17 Steel for 11179-3 ISO/DIS 15461 * Steel forgings — Testing fre- ISO/IEC PDTR Information technology — Concepts and usage quency, sampling conditions 19583-22 of metadata — Part 22: Registering and map- and test methods for mechanical 2017-04-18 ping development processes using 19763-5 tests and 19763-10 ISO/DIS 10144 * Steels for the reinforcement and ISO/IEC CD Information technology — Service manage- prestressing of concrete — Cer- 20000-1 ment — Part 1: Service management system tification scheme for steel bars 2017-04-17 requirements and wires ISO/IEC PDTR Information technology — Continual perfor- (Revision of ISO 10144:1991) 22446 mance improvement of IT enabled services ISO/DIS * Steel for the reinforcement and 15630-1 prestressing of concrete — Test methods — Part 1: Reinforcing 2017-04-18 bars, wire rod and wire (Revision of ISO 15630-1:2010) ISO/DIS * Steel for the reinforcement and 15630-2 prestressing of concrete — Test DIS circulated methods — Part 2: Welded fabric 2017-04-18 and lattice girder (Revision of ISO 15630-2:2010) ISO/DIS * Steel for the reinforcement and Period from 01 January to 31 January 2017 15630-3 prestressing of concrete — Test methods — Part 3: Prestressing 2017-04-18 These documents have obtained substantial support within the ap- steel propriate ISO technical committee. (Revision of ISO 15630-3:2010) ISO Update, Supplement to ISO Focus -- February 2017 3 ISO/DIS * Steels for the reinforcement of ISO/DIS * Electrically propelled road 15835-1 concrete — Reinforcement cou- 12405-4 vehicles --Test specification for plers for mechanical splices of 2017-04-18 lithium-ion traction battery packs 2017-04-24 bars — Part 1: Requirements and systems — Part 4: Perfor- (Revision of ISO 15835-1:2009) mance testing ISO/DIS * Steels for the reinforcement of ISO/DIS 16673 * Road vehicles — Ergonomic 15835-2 concrete — Reinforcement cou- aspects of transport information plers for mechanical splices of 2017-04-18 and control systems — Occlu- 2017-03-29 bars — Part 2: Test methods sion method to assess visual (Revision of ISO 15835-2:2009) demand due to the use of in- vehicle systems ISO/DIS * Steels for the reinforcement (Revision of ISO 16673:2007) 15835-3 of concrete — Reinforcement couplers for mechanical splices 2017-04-18 ISO/DIS * Road vehicles — Compressed of bars — Part 3: Conformity 12619-7 gaseous hydrogen (CGH2) and assessment scheme hydrogen/natural gas blends fuel 2017-04-10 system components — Part 7: TC 20 Aircraft and space vehicles Gas injector ISO/DIS 21100 * Aircraft ground equipment — Performance requirements and TC 23 Tractors and machinery for test parameters 2017-03-28 agriculture and forestry ISO 5395- * Garden equipment — Safety (Revision of ISO 21100:2014) 1:2013/DAmd requirements for combustion- ISO/DIS 19924 * Space systems — Acoustic 1 engine-powered lawnmowers — 2017-03-29 testing Part 1: Terminology and common 2017-03-30 tests — Amendment 1: Annex G (Vibration test code — Hand- arm vibration and Whole-body ISO/DIS 20188 * Space systems — Product vibration) assurance requirements for com- mercial satellites 2017-04-07 ISO/DIS * Tractors and machinery for ag- 25119-1 riculture and forestry — Safety- related parts of control systems 2017-03-29 ISO/DIS 20892 * Space systems — Launch com- — Part 1: General principles for plexes modernization process — design and development General requirements 2017-04-07 (Revision of ISO 25119-1:2010) ISO/DIS * Tractors and machinery for ag- ISO/DIS 23038 * Space systems — Space solar 25119-2 riculture and forestry — Safety- cells — Electron and proton ir- related parts of control systems 2017-03-29 radiation test methods 2017-04-13 — Part 2: Concept phase (Revision of ISO 25119-2:2010) (Revision of ISO 23038:2006) ISO/DIS * Tractors and machinery for ag- TC 21 Equipment for fire protec- 25119-3 riculture and forestry — Safety- tion and fire fighting related parts of control systems 2017-03-29 ISO/DIS * Acoustics — Audible and other — Part 3: Series development, 8201.2 emergency evacuation signals hardware and software 2017-03-27 (Revision of ISO 25119-3:2010) ISO/DIS * Tractors and machinery for ag- (Revision of ISO 8201:1987) 25119-4 riculture and forestry — Safety- related parts of control systems 2017-03-29 TC 22 Road vehicles — Part 4: Production, operation, ISO/DIS * Road vehicles — Controller area modification and supporting 16845-2 network (CAN) conformance processes test plan — Part 2: High-speed 2017-04-24 (Revision of ISO 25119-4:2010) medium access unit — Conform- ance test plan TC 24 Particle characterization (Revision of ISO 16845-2:2014) including sieving ISO/DIS * Road vehicles — Connectors for ISO/DIS * Determination of particle density 7638-1 the electrical connection of tow- 18747-1 by sedimentation methods — ing and towed vehicles — Part 1: 2017-04-24 Part 1: Isopycnic interpolation 2017-04-10 Connectors for braking systems approach and running gear of vehicles with TC 28 Petroleum and related 24 V nominal supply voltage products, fuels and lu- (Revision of ISO 7638-1:2003) bricants from natural or ISO/DIS * Road vehicles — Connectors for synthetic sources 7638-2 the electrical connection of tow- ing and towed vehicles — Part 2: 2017-04-24 ISO/DIS * Petroleum and related prod- Connectors for braking systems 15029-2 ucts — Determination of spray and running gear of vehicles with ignition characteristics of fire- 2017-04-20 12 V nominal supply voltage resistant fluids — Part 2: Spray (Revision of ISO 7638-2:2003) test — Stabilized flame heat release method ISO/DIS * Electrically propelled road (Revision of ISO/TS 6469-2 vehicles — Safety specifications 15029-2:2012) element — Part 2: Vehicle opera- 2017-04-24 tional safety (Revision of ISO 6469-2:2009) 4 ISO Update, Supplement to ISO Focus -- February 2017 ISO/DIS 20623 * Petroleum and related products ISO/DIS 19817 * Essential oil of thyme [Thymus — Determination of the extreme- vulgaris L. and Thymus zygis L.], pressure and anti-wear proper- 2017-04-21 thymol type 2017-05-08 ties of lubricants — Four-ball method (European conditions) (Revision of ISO 14715:2010) (Revision of ISO 20623:2003) TC 61 Plastics ISO/DIS 2714 * Liquid hydrocarbons — Volumet- ISO/DIS * Plastics — Determination of ric measurement by displace- 4582.2 changes in colour and variations ment meter 2017-04-05 in properties after exposure to 2017-03-20 daylight under glass, natural (Revision of ISO 2714:1980) weathering or laboratory light ISO/DIS 2715 * Liquid hydrocarbons — Volu- sources metric measurement by turbine (Revision of ISO 4582:2007) flowmeter 2017-04-05 ISO/DIS * Plastics — Ethylene/vinyl alcohol 21309-1 (EVOH) copolymer moulding and (Revision of ISO 2715:1981) extrusion materials — Part 1: TC 33 Refractories Designation system and basis for specifications ISO/DIS 16169 * Preparation of silicon carbide (Revision of ISO 14663-1:1999) and similar materials for analysis by ISO 12677 X-ray fluores- 2017-04-17 TC 68 Financial services cence (XRF) — Fused cast-bead ISO/DIS 21188 * Public key infrastructure for method financial services — Practices TC 34 Food products and policy framework 2017-04-21 ISO/DIS * Sustainable and traceable cocoa (Revision of ISO 15782- 34101-4 beans — Part 4: Requirements 2:2001, ISO 21188:2006, ISO for certification schemes 2017-04-20 15782-1:2009) TC 38 Textiles TC 70 Internal combustion engines ISO/DIS 12138 * Textiles — Domestic laundering procedures for textile fabrics ISO/DIS * Reciprocating internal combus- prior to flammability testing 2017-04-14 2710-1 tion engines — Vocabulary — Part 1: Terms for engine design (Revision of ISO 12138:1996) and operation (Revision of ISO 2710-1:2000) TC 43 Acoustics TC 76 Transfusion, infusion ISO/DIS * Acoustics — Hearing protec- and injection, and blood 4869-6 tors — Part 6: Determination of processing equipment for sound attenuation of active noise 2017-04-19 reduction earmuffs medical and pharmaceuti- cal use ISO * Acoustics — Noise emitted by 11200:2014/ machinery and equipment — ISO/DIS * Pen systems — Part 2: Plunger DAmd 1 Guidelines for the use of basic 2017-04-14 13926-2 stoppers for pen-injectors for standards for the determination medical use 2017-04-17 of emission sound pressure lev- els at a work station and at other (Revision of ISO 13926-2:2011, specified positions — Amend- ISO 13926-2:2011/Amd 1:2015) ment 1 TC 83 Sports and other rec- TC 44 Welding and allied reational facilities and processes equipment ISO/DIS 26304 * Welding consumables — Solid ISO/DIS 6003 * Alpine skis — Determination wire electrodes, tubular cored of mass and polar moment of electrodes and electrode-flux 2017-03-28 inertia — Laboratory measure- 2017-03-31 combinations for submerged arc ment method welding of high strength steels (Revision of ISO 6003:1984) — Classification ISO/DIS 7138 * Cross-country skis — Determi- (Revision of ISO 26304:2011) nation of mass and location of ISO/DIS 13916 * Welding — Guidance on the balance point 2017-03-31 measurement of preheating temperature, interpass tempera- 2017-04-12 (Revision of ISO 7138:1984) ture and preheat maintenance ISO/DIS 7139 * Cross-country skis — Determi- temperature nation of elastic properties (Revision of ISO 13916:1996) 2017-03-31 TC 45 Rubber and rubber products (Revision of ISO 7139:1984) ISO/DIS 2004 * Natural rubber latex concen- ISO/DIS 7798 * Cross-country skis — Deter- trate — Centrifuged or creamed, mination of fatigue indexes — ammonia-preserved types 2017-04-14 Cyclic loading test 2017-03-31 — Specifications (Revision of ISO 2004:2010) (Revision of ISO 7798:1984) TC 54 Essential oils TC 85 Nuclear energy, nuclear technologies, and radio- logical protection ISO Update, Supplement to ISO Focus -- February 2017 5 ISO/ASTM DIS * Practice for use of the ethanol- ISO/DIS 20523 * Carbon based films — Classifi- 51538 chlorobenzene dosimetry system cation and designations 2017-05-11 (Revision of ISO/ASTM 51538:2009) TC 130 Graphic technology ISO/DIS 16793 Nuclear fuel technology — Guide ISO/DIS 20690 Graphic technology — Determi- for ceramographic preparation of nation of the operating power UO2 sintered pellets for micro- 2017-04-14 consumption of digital printing 2017-04-22 structure examination devices (Revision of ISO 16793:2005, ISO 16793:2005/CD Amd 1) TC 138 Plastics pipes, fittings and ISO/DIS 18229 * Essential technical requirements valves for the transport of for mechanical components and fluids metallic structures foreseen for 2017-04-24 ISO/DIS 4065 * Thermoplastics pipes — Univer- Generation IV Nuclear Reactors sal wall thickness table ISO/DIS 19226 * Nuclear energy — Determination 2017-04-05 of neutron fluence and displace- ment per atom (dpa) in reactor 2017-04-18 (Revision of ISO 4065:1996) vessel and internals ISO/DIS * Thermoplastics pipes for the TC 87 Cork 11922-1 conveyance of fluids — Dimen- sions and tolerances — Part 1: 2017-04-05 ISO/DIS 1216 * Boiled reproduction cork — Metric series Grading, classification and (Revision of ISO 11922-1:1997) packing 2017-04-06 ISO * Thermoplastics piping systems (Revision of ISO 1216:1998) 13260:2010/ for non-pressure underground DAmd 1 drainage and sewerage — 2017-03-31 TC 89 Wood-based panels Test method for resistance to ISO/DIS * Wood-based panels — Determi- combined temperature cycling 12460-2 nation of formaldehyde release and external loading — Amend- — Part 2: Small-scale chamber 2017-03-31 ment 1 method ISO/DIS 6964 * Polyolefin pipes and fittings — TC 94 Personal safety -- Pro- Determination of carbon black tective clothing and content by calcination and pyrolysis — Test method equipment (Revision of ISO 6964:1986) ISO/DIS * Protective clothing for firefighters ISO/DIS 10146 * Crosslinked polyethylene (PE-X 18640-1.2 — Physiological impact — Part and PE-MDX) — Effect of time 1: Measurement of coupled heat 2017-03-17 and temperature on expected 2017-04-06 and moisture transfer with the strength sweating TORSO (Revision of ISO 10146:1997) ISO/DIS * Protective clothing for fire- 18640-2.2 fighters — Physiological impact TC 147 Water quality — Part 2: Determination of 2017-03-17 ISO/DIS * Water quality — Determina- physiological heat load caused 7393-2 tion of free chlorine and total by protective clothing worn by chlorine — Part 2: Colorimetric 2017-04-21 firefighters method using N,N-diethyl-1,4- phenylenediamine, for routine TC 96 Cranes control purposes ISO/DIS * Cranes — Wire ropes — Care (Revision of ISO 7393-2:1985) 4309.2 and maintenance, inspection and discard TC 150 Implants for surgery (Revision of ISO 4309:2010) ISO/DIS * Implants for surgery — Metallic 5832-2 materials — Part 2: Unalloyed ISO/DIS * Cranes — Design principles for titanium 2017-05-01 8686-3 loads and load combinations — Part 3: Tower cranes 2017-03-31 (Revision of ISO 5832-2:1999) (Revision of ISO 8686-3:1998) ISO/DIS * Implants for surgery — Wear of 14243-5 total knee prostheses — Part 5: TC 104 Freight containers Durability performance of the 2017-04-25 ISO/DIS 3874 * Series 1 freight containers — patellofemoral joint — Loading Handling and securing and displacement parameters 2017-04-20 for testing machines and cor- responding environmental condi- (Revision of ISO 3874:1997, ISO tions for test 3874:1997/Amd 1:2000, ISO 3874:1997/Amd 2:2002, ISO TC 156 Corrosion of metals and 3874:1997/Amd 3:2005, ISO alloys 3874:1997/Amd 4:2007) ISO/DIS * Accelerated life test method of TC 107 Metallic and other inorgan- 19097-1 mixed metal oxide anodes for cathodic protection — Part 1: 2017-04-24 ic coatings Application in concrete ISO/DIS 14918 * Thermal spraying — Qualification ISO/DIS * Accelerated life test method of testing of thermal sprayers 19097-2 mixed metal oxide anodes for 2017-04-24 cathodic protection — Part 2: 2017-04-24 Application in soils and natural (Revision of ISO 14918:1998) waters 6 ISO Update, Supplement to ISO Focus -- February 2017 (Revision of ISO 29301:2010) TC 168 Prosthetics and orthotics ISO/DIS 21063 * Prosthetics and orthotics — Soft TC 204 Intelligent transport orthoses — Uses, functions, systems classification and description 2017-04-04 ISO/DIS * Electronic fee collection — 16407-1 Evaluation of equipment for ISO/DIS 21064 * Prosthetics and orthotics — Foot conformity to ISO/TS 17575-1 — 2017-04-07 orthotics — Uses, functions Part 1: Test suite structure and classification and description 2017-04-04 test purposes (Revision of ISO/TS 16407-1:2011) ISO/DIS 21065 * Prosthetics and orthotics — Terms relating to the treatment ISO/DIS 25110 * Electronic fee collection — and rehabilitation of persons 2017-04-04 Interface definition for on-board having a lower limb amputation account using integrated circuit 2017-04-07 card (ICC) TC 171 Document management (Revision of ISO/TS 25110:2013) applications TC 205 Building environment ISO/DIS Document management — design 24517-2.2 Engineering document format using PDF — Part 2: Use of ISO 2017-04-20 ISO/DIS * Building environment design — 32000-2 including support for 11855-6 Design, dimensioning, installa- long-term preservation (PDF/E-2) tion and control of embedded 2017-03-27 radiant heating and cooling TC 172 Optics and photonics systems — Part 6: Control ISO/DIS * Ophthalmic implants — Intraocu- (Revision of ISO 11855-6:2012) 11979-10 lar lenses — Part 10: Clinical in- TC 206 Fine ceramics vestigations of intraocular lenses 2017-04-17 for correction of ametropia in ISO/DIS 20351 * Fine ceramics (advanced ceram- phakic eyes ics, advanced technical ceram- (Revision of ISO 11979-10:2006, ics) — Absolute measurement 2017-04-07 ISO 11979-10:2006/Amd 1:2014) of internal quantum efficiency of phosphors for white light emit- ISO/DIS 11981 * Ophthalmic optics — Contact ting diodes using an integrating lenses and contact lens care sphere products — Determination of 2017-04-14 physical compatibility of contact ISO/DIS 20407 * Fine ceramics (advanced lens care products with contact ceramics, advanced technical lenses ceramics) — Test method for in- 2017-04-07 (Revision of ISO 11981:2009) terfacial tensile and shear fatigue properties of ceramic joining at TC 185 Safety devices for protec- constant amplitude tion against excessive TC 213 Dimensional and geometri- pressure cal product specifications ISO/DIS * Safety devices for protection and verification 4126-2 against excessive pressure — Part 2: Bursting disc safety 2017-04-07 ISO/DIS 14978 * Geometrical product specifica- devices tions (GPS) — General concepts (Revision of ISO 4126-2:2003) and requirements for GPS meas- 2017-06-05 uring equipment TC 198 Sterilization of health care (Revision of ISO 14978:2006, products ISO 14978:2006/Cor 1:2008) ISO/DIS 25424 * Sterilization of health care TC 216 Footwear products — Low temperature ISO/DIS 20150 * Footwear and footwear compo- steam and formaldehyde — 2017-04-06 nents — Quantitative challenge Requirements for development, test method to assess antifungal 2017-05-04 validation and routine control of activity a sterilization process for medi- cal devices ISO/DIS 20536 * Footwear — Critical substances (Revision of ISO 25424:2009) potentially present in footwear and footwear components 2017-04-06 TC 201 Surface chemical analysis — Determination of phenol in ISO/DIS 20289 * Surface chemical analysis — To- footwear materials tal reflection X-ray fluorescence analysis of water 2017-04-18 TC 227 Springs ISO/DIS * Disc springs — Part 2: Technical 19690-2 specifications TC 202 Microbeam analysis 2017-04-14 ISO/DIS 25498 * Microbeam analysis — Analytical electron microscopy — Se- lected-area electron diffraction 2017-04-06 TC 238 Solid biofuels analysis using a transmission ISO/DIS 20023 * Solid biofuels — Safety of solid electron microscope biofuel pellets — Safe handling (Revision of ISO 25498:2010) and storage of wood pellets in 2017-04-14 residential and other small-scale ISO/DIS 29301 * Microbeam analysis — Analytical applications transmission electron micros- copy — Methods for calibrating 2017-04-06 TC 270 Plastics and rubber image magnification by using machines reference materials having peri- odic structures ISO Update, Supplement to ISO Focus -- February 2017 7 ISO/DIS 20430 * Plastics and rubber machines — ISO/IEC * Information technology — Cod- Injection moulding machines — 14496- ing of audio-visual objects — Safety requirements 2017-04-04 30:2014/DAmd Part 30: Timed text and other 2017-03-30 1 visual overlays in ISO base me- dia file format — Amendment 1: JTC 1 Information technology Support for CTA-708 captioning ISO/IEC DIS * Software engineering — NESMA in SEI messages 24570 functional size measurement ISO/IEC * Information technology — Mul- method — Definitions and count- 2017-03-31 21000- timedia framework (MPEG-21) ing guidelines for the application 19:2010/DAmd — Part 19: Media Value Chain 2017-03-27 of function point analysis 1 Ontology — Amendment 1: Ex- (Revision of ISO/IEC tensions on time-segments and 24570:2005) multi-track audio ISO/IEC DIS * Identification cards — Integrated ISO/IEC DIS * Information technology — Mul- 19286 circuit cards — Privacy-enhanc- 23000-19 timedia application format ing protocols and services 2017-03-31 (MPEG-A) — Part 19: Common 2017-03-30 media application format (CMAF) ISO/IEC DIS * Information technology — Home ISO/IEC * Information technology — MPEG 10192-3 electronic system (HES) inter- 23001- systems technologies — Part faces — Part 3: Modular com- 2017-04-12 11:2015/DAmd 11: Energy-efficient media 2017-03-30 munications interface for energy 2 consumption (green metadata) management — Amendment 2: Conformance ISO/IEC * Information technology — Secu- and reference software 11770-3:2015/ rity techniques — Key manage- ISO/IEC DIS * Information technology — High DAmd 1 ment — Part 3: Mechanisms 2017-04-14 23008-6 efficiency coding and media using asymmetric techniques delivery in heterogeneous en- 2017-03-31 — Amendment 1: Blinded Diffie- vironments — Part 6: 3D Audio Hellman key agreement reference software ISO/IEC * Information technology — Se- ISO/IEC DIS * Information technology — Dy- 18033-2:2006/ curity techniques — Encryption 23009-6 namic adaptive streaming DAmd 1 algorithms — Part 2: Asymmetric 2017-04-05 over HTTP (DASH) — Part 6: 2017-03-30 ciphers — Amendment 1: FACE DASH with server push and ISO/IEC DIS * Information technology — Se- websockets 27007 curity techniques — Guidelines ISO/IEC * Information technology — Ad- for information security manage- 2017-03-31 29170-2:2015/ vanced image coding and evalu- ment systems auditing DAmd 1 ation — Part 2: Evaluation proce- 2017-04-03 (Revision of ISO/IEC dure for nearly lossless coding 27007:2011) — Amendment 1: Parameters ISO/IEC DIS * Information technology — Se- for nearly lossless coding of high 27019 curity techniques — Information dynamic range media security controls for the energy 2017-03-31 ISO/IEC * Information technology — Ad- utility industry 29170-2:2015/ vanced image coding and (Revision of ISO/IEC TR DAmd 2 evaluation — Part 2: Evaluation 2017-04-03 27019:2013) procedure for nearly lossless ISO/IEC DIS * Information technology — Secu- coding — Amendment 2: Evalua- 27021 rity techniques — Competence tion procedure for nearly lossless requirements for information 2017-03-31 coding of image sequences security management systems ISO/IEC DIS * Information technology — Radio professionals 21277 frequency identification device ISO/IEC DIS * Information technology — Ap- performance test methods — 2017-04-05 27034-3 plication security — Part 3: Ap- Crypto suite plication security management 2017-04-05 ISO/IEC DIS * Information technology — Bio- process 19794-13 metric data interchange formats ISO/IEC DIS * Information technology — Se- — Part 13: Voice data 2017-04-18 29003 curity techniques — Identity proofing 2017-04-04 ISO/IEC * Information technology — Secu- 29115:2013/ rity techniques — Entity authen- DAmd 1 tication assurance framework 2017-04-14 — Amendment 1 ISO/IEC 14496- 12:2015/DAmd * Information technology — Cod- ing of audio-visual objects — Part 12: ISO base media file for- 2017-03-30 FDIS circulated 2 mat — Amendment 2: Support for image file format Period from 01 January to 31 January 2017 ISO/IEC * Information technology — Cod- These Final draft International Standards have been submitted to the 14496- ing of audio-visual objects — ISO member bodies for formal approval by the date shown 27:2009/DAmd Part 27: 3D Graphics conform- 2017-03-30 7 ance — Amendment 7: Printing * Available in English only material and 3D graphics coding for browsers conformance 8 ISO Update, Supplement to ISO Focus -- February 2017 (Revision of ISO 16392:2007) Vote TC 34 Food products terminates ISO/FDIS * Microbiology of the food chain 11290-1 — Horizontal method for the TC 4 Rolling bearings detection and enumeration of 2017-03-03 ISO/FDIS * Rolling bearings — Damage and Listeria monocytogenes and 15243 failures — Terms, characteristics other Listeria spp. — Part 1: and causes 2017-03-01 Detection method (Revision of ISO 11290-1:1996, (Revision of ISO 15243:2004) ISO 11290-1:1996/Amd 1:2004) ISO/FDIS * Microbiology of the food chain TC 17 Steel 11290-2 — Horizontal method for the ISO/FDIS * Non-alloy steel wire rod for con- detection and enumeration of 2017-03-03 16120-1 version to wire — Part 1: General Listeria monocytogenes and of requirements 2017-03-17 Listeria spp. — Part 2: Enumera- tion method (Revision of ISO 16120-1:2011) (Revision of ISO 11290-2:1998, ISO/FDIS * Non-alloy steel wire rod for ISO 11290-2:1998/Amd 1:2004) 16120-4 conversion to wire — Part 4: ISO/FDIS * Microbiology of the food chain Specific requirements for wire 2017-03-17 21528-1 — Horizontal methods for the rod for special applications detection and enumeration of 2017-03-25 (Revision of ISO 16120-4:2011) Enterobacteriaceae — Part 1: ISO/FDIS 377 * Steel and steel products — Detection of Enterobacteriaceae Location and preparation of (Revision of ISO 21528-1:2004) samples and test pieces for 2017-04-25 ISO/FDIS * Microbiology of the food chain mechanical testing 21528-2 — Horizontal methods for the (Revision of ISO 377:2013) detection and enumeration of 2017-03-25 Enterobacteriaceae — Part 2: TC 20 Aircraft and space vehicles Colony-count method ISO/FDIS 9538 * Aerospace series — Hydraulic (Revision of ISO 21528-2:2004) tubing joints and fittings — Pla- nar flexure test 2017-03-21 TC 43 Acoustics ISO/FDIS * Building acoustics — Estima- (Revision of ISO 9538:1996) 12354-1 tion of acoustic performance of ISO/FDIS * Aerospace series — AC induc- buildings from the performance 2017-03-21 18170 tion electric motor driven, vari- of elements — Part 1: Airborne able delivery, hydraulic pumps 2017-03-24 sound insulation between rooms — General requirements (Revision of ISO 15712-1:2005) ISO/FDIS * Aerospace series — Titanium ISO/FDIS * Building acoustics — Estima- 18487-1 tube for 35 MPa operating pres- 12354-2 tion of acoustic performance of sure — Part 1: Inch series 2017-03-11 buildings from the performance 2017-03-21 of elements — Part 2: Impact sound insulation between rooms TC 21 Equipment for fire protec- (Revision of ISO 15712-2:2005) tion and fire fighting ISO/FDIS * Building acoustics — Estima- ISO/FDIS * Smoke and heat control systems 12354-3 tion of acoustic performance of 21927-7 — Part 7: Smoke ducts sections buildings from the performance 2017-03-21 2017-03-25 of elements — Part 3: Airborne sound insulation against outdoor ISO/FDIS * Smoke and heat control sys- sound 21927-8 tems — Part 8: Smoke control (Revision of ISO 15712-3:2005) dampers 2017-03-25 ISO/FDIS * Building acoustics — Estima- 12354-4 tion of acoustic performance of buildings from the performance 2017-03-21 TC 27 Solid mineral fuels of elements — Part 4: Trans- ISO/FDIS * Solid mineral fuels — Guidance mission of indoor sound to the 14180 on the sampling of coal seams outside 2017-03-03 (Revision of ISO 15712-4:2005) ISO/FDIS * Underwater acoustics (Revision of ISO 14180:1998) 18405 — Terminology TC 28 Petroleum and related 2017-03-02 products, fuels and lu- bricants from natural or ISO/FDIS * Underwater acoustics — Meas- synthetic sources 18406 urement of radiated underwater ISO/FDIS * Refrigerated hydrocarbon and sound from percussive pile 2017-03-02 19970 non-petroleum based liquefied driving gaseous fuels — Metering of gas 2017-03-25 TC 44 Welding and allied as fuel on LNG carriers during processes cargo transfer operations ISO/FDIS * Specification and qualification of TC 31 Tyres, rims and valves 15614-1 welding procedures for metallic ISO/FDIS * Tyres — Electrical resistance materials — Welding procedure 2017-03-16 16392 — Test method for measuring test — Part 1: Arc and gas weld- electrical resistance of tyres on 2017-03-22 ing of steels and arc welding of a test rig nickel and nickel alloys ISO Update, Supplement to ISO Focus -- February 2017 9 (Revision of ISO 15614-1:2004, ISO/FDIS * Iron ores — Determination of cal- ISO 15614-1:2004/Cor 1:2005, 10203 cium — Flame atomic absorp- ISO 15614-1:2004/Amd 1:2008) tion spectrometric method 2017-03-03 TC 59 Buildings and civil engi- neering works (Revision of ISO 10203:2015) ISO/FDIS * Buildings and civil engineering ISO/FDIS * Iron ores — Determination of 10563 works — Sealants — Determi- 13312 potassium — Flame atomic ab- nation of change in mass and 2017-03-21 sorption spectrometric method 2017-03-03 volume (Revision of ISO 10563:2005) (Revision of ISO 13312:2006) ISO/FDIS * Sustainability in buildings and TC 107 Metallic and other inorgan- 16745-1 civil engineering works — Car- ic coatings bon metric of a building during 2017-03-24 ISO/FDIS * Thermal spraying — Powders use stage — Part 1: Calculation, 14232-1 — Part 1: Characterization and reporting and communication technical supply conditions 2017-03-01 (Revision of ISO 16745:2015) ISO/FDIS * Sustainability in buildings and (Revision of ISO 14232:2000) 16745-2 civil engineering works — Car- TC 119 Powder metallurgy bon metric of a building during 2017-03-09 use stage — Part 2: Verification ISO/FDIS 4496 * Metallic powders — Determina- (Revision of ISO 16745:2015) tion of acid-insoluble content in iron, copper, tin and bronze 2017-04-19 TC 61 Plastics powders ISO/FDIS * Plastics — Injection moulding of (Revision of ISO 4496:1978) 294-1 test specimens of thermoplastic TC 121 Anaesthetic and respiratory materials — Part 1: General prin- 2017-03-04 ciples, and moulding of multipur- equipment pose and bar test specimens ISO/FDIS * Medical electrical equipment (Revision of ISO 294-1:1996, ISO 80601-2-74 — Part 2-74: Particular require- 294-1:1996/Amd 1:2001, ISO ments for basic safety and 2017-03-03 294-1:1996/Amd 2:2005) essential performance of respira- ISO/FDIS * Plastics — Fluoropolymer tory humidifying equipment 20568-1 dispersions and moulding and (Revision of ISO 8185:2007) extrusion materials — Part 1: 2017-03-28 TC 123 Plain bearings Designation system and basis ISO/FDIS * Plain bearings — Testing of for specifications 10129 bearing metals — Resistance (Revision of ISO 12086-1:2006) to corrosion by lubricants under 2017-03-03 ISO/FDIS * Plastics — Fluoropolymer static conditions 20568-2 dispersions and moulding and (Revision of ISO 10129:2006) extrusion materials — Part 2: 2017-03-28 ISO/FDIS * Plain bearings — Quality char- Preparation of test specimens 12302 acteristics — Statistical process and determination of properties control (SPC) 2017-03-04 (Revision of ISO 12086-2:2006) TC 82 Mining (Revision of ISO 12302:1993) ISO/FDIS * Underground mining machines ISO/FDIS * Plain bearings — Quality assur- 19225 — Mobile extracting machines at 12308 ance of sample types — Defini- the face — Safety requirements 2017-03-16 tions, applications and testing 2017-03-24 for shearer loaders and plough systems (Revision of ISO 12308:1994) TC 85 Nuclear energy, nuclear TC 153 Valves technologies, and radio- ISO/FDIS * Industrial valves — Lined metal logical protection 19240 quarter turn and check valves ISO/ASTM * Practice for use of a ceric-cerous for chemical process and related 2017-03-28 FDIS 51205 sulfate dosimetry system industries 2017-03-09 TC 156 Corrosion of metals and alloys (Revision of ISO/ASTM 51205:2009) ISO/FDIS * Determination of resistance to 3651-3 intergranular corrosion of stain- TC 96 Cranes less steels — Part 3: Corrosion 2017-03-24 ISO/FDIS * Cranes — Cabins and control test for low-Cr ferritic stainless 8566-5 stations — Part 5: Overhead steels travelling and portal bridge 2017-03-17 ISO/FDIS * Corrosion of metals and alloys cranes 6509-2 — Determination of dezincifica- (Revision of ISO 8566-5:1992) tion resistance of copper alloys 2017-03-03 TC 102 Iron ore and direct reduced with zinc — Part 2: Assessment iron criteria (Revision of ISO 6509:1981) ISO/FDIS 3082 * Iron ores — Sampling and sam- ple preparation procedures TC 159 Ergonomics 2017-03-28 ISO/FDIS * Ergonomics of human-system 9241-333 interaction — Part 333: Stereo- (Revision of ISO 3082:2009, ISO scopic displays using glasses 2017-03-03 3082:2009/Cor 1:2009) 10 ISO Update, Supplement to ISO Focus -- February 2017 TC 184 Automation systems and ISO/FDIS * Traditional Chinese medicine — integration 19611 Air extraction cupping device 2017-03-04 ISO/FDIS * Automation systems and 20140-5 integration — Evaluating energy efficiency and other factors of 2017-03-03 ISO/FDIS * Traditional Chinese medicine — manufacturing systems that in- 19614 Pulse graph force transducer fluence the environment — Part 5: Environmental performance TC 301 Energy management and evaluation data energy savings TC 202 Microbeam analysis ISO/FDIS * Energy services — Guidelines for ISO/FDIS * Microbeam analysis — Analytical 50007 the assessment and improve- 19214 electron microscopy — Method ment of the energy service to 2017-03-23 of determination for appar- 2017-03-15 users ent growth direction of wirelike JTC 1 Information technology crystals by transmission electron microscopy ISO/IEC FDIS * Information technology — Open 9594-1 Systems Interconnection — The TC 205 Building environment Directory — Part 1: Overview of 2017-03-20 design concepts, models and services ISO/FDIS * Building environment design (Revision of ISO/IEC 16817 — Indoor environment — De- 9594-1:2014) sign process for the visual 2017-03-21 ISO/IEC FDIS * Information technology — Open environment 9594-2 Systems Interconnection — The (Revision of ISO 16817:2012) Directory — Part 2: Models 2017-03-20 TC 213 Dimensional and geometri- cal product specifications (Revision of ISO/IEC 9594-2:2014) and verification ISO/IEC FDIS * Information technology — Open ISO/FDIS * Geometrical product specifica- 9594-3 Systems Interconnection — The 25178-72 tions (GPS) — Surface texture: Directory — Part 3: Abstract 2017-03-20 Areal — Part 72: XML file format 2017-03-23 service definition x3p (Revision of ISO/IEC TC 215 Health informatics 9594-3:2014) ISO/IEEE FDIS * Health informatics — Personal ISO/IEC FDIS * Information technology — Open 11073-10422 health device communication — 9594-4 Systems Interconnection — The Part 10422: Device specialization 2017-06-20 Directory — Part 4: Procedures 2017-03-20 — Urine analyser for distributed operation (Revision of ISO/IEC TC 217 Cosmetics 9594-4:2014) ISO/FDIS * Cosmetics — Microbiology — ISO/IEC FDIS * Information technology — Open 16212 Enumeration of yeast and mould 9594-5 Systems Interconnection — The 2017-03-28 Directory — Part 5: Protocol 2017-03-20 specifications (Revision of ISO 16212:2008) (Revision of ISO/IEC ISO/FDIS * Cosmetics — Microbiology — 9594-5:2014) 18415 Detection of specified and non- ISO/IEC FDIS * Information technology — Open specified microorganisms 2017-03-28 9594-6 Systems Interconnection — The Directory — Part 6: Selected at- 2017-03-20 (Revision of ISO 18415:2007) tribute types ISO/FDIS * Cosmetics — Microbiology — (Revision of ISO/IEC 21148 General instructions for micro- 9594-6:2014) biological examination 2017-03-28 ISO/IEC FDIS * Information technology — Open 9594-7 Systems Interconnection — The (Revision of ISO 21148:2005, Directory — Part 7: Selected 2017-03-20 ISO 21148:2005/Cor 1:2006) object classes ISO/FDIS * Cosmetics — Microbiology — (Revision of ISO/IEC 21149 Enumeration and detection of 9594-7:2014) aerobic mesophilic bacteria 2017-03-28 ISO/IEC FDIS * Information technology — Open 9594-8 Systems Interconnection — The (Revision of ISO 21149:2006) Directory — Part 8: Public- 2017-03-20 TC 238 Solid biofuels key and attribute certificate frameworks ISO/FDIS * Solid biofuels — Determination (Revision of ISO/IEC 18125 of calorific value 9594-8:2014) 2017-03-03 ISO/IEC FDIS * Information technology — Open 9594-9 Systems Interconnection — The ISO/FDIS * Solid biofuels — Determination Directory — Part 9: Replication 2017-03-20 19743 of content of heavy extraneous materials larger than 3,15 mm 2017-03-04 (Revision of ISO/IEC 9594-9:2014) TC 249 Traditional chinese ISO/IEC/IEEE * Systems and software engineer- medicine FDIS 24748-5 ing — Life cycle management — Part 5: Software development 2017-03-16 planning ISO Update, Supplement to ISO Focus -- February 2017 11 ISO/IEC FDIS * Information technology — Learn- ISO 5395- Garden equipment — Safety require- 19788-7 ing, education and training — 3:2013/Amd ments for combustion-engine-powered Metadata for learning resources 2017-03-07 1:2017 lawnmowers — Part 3: Ride-on XZ — Part 7: Bindings lawnmowers with seated operator — Amendment 1: OPC, Parking brake, ISO/IEC FDIS * Information technology — Gov- ROPS, pressurized hoses, cutting 38505-1 ernance of IT — Part 1: Applica- means, grass catcher and test probe tion of ISO/IEC 38500 to the 2017-03-09 governance of data ISO 7112:2017 * Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary A TC 25 Cast irons and pig irons ISO * Compacted (vermicular) graphite cast 16112:2017 irons — Classification D Standards published TC 29 Small tools ISO/TS 13399- * Cutting tool data representation and 305:2017 exchange — Part 305: Creation and New International Standards published between 01 January and 31 exchange of 3D models — Modular G January 2017 tooling systems with adjustable car- * Available in English only tridges for boring ** French version of standard previously published in English only TC 34 Food products ISO * Determination of theanine in tea and 19563:2017 instant tea in solid form using high- performance liquid chromatography C Price group ISO * Microbiology of food, animal feed and 11133:2014 water — Preparation, production, stor- age and performance testing of culture H IIW International Institute of Welding media ISO Non-destructive testing — Ultrasonic ISO Microbiology of the food chain — 19675:2017 testing — Specification for a calibration 18465:2017 Quantitative determination of emetic block for phased array testing (PAUT) D toxin (cereulide) using LC-MS/MS C PC 252 Natural gas fuelling stations for TC 35 Paints and varnishes vehicles ISO Paints and varnishes — Determination ISO Natural gas fuelling stations — CNG 20567-1:2017 of stone-chip resistance of coatings — 16923:2016 stations for fuelling vehicles Part 1: Multi-impact testing B F ISO Paints and varnishes — Determination ISO Natural gas fuelling stations — LNG 20567-2:2017 of stone-chip resistance of coatings 16924:2016 stations for fuelling vehicles — Part 2: Single-impact test with a B G guided impact body ISO Preparation of steel substrates before TC 5 Ferrous metal pipes and metallic 8502-2:2017 application of paints and related fittings products — Tests for the assess- A ment of surface cleanliness — Part 2: ISO Ductile iron pipes, fittings, accessories Laboratory determination of chloride 16631:2016 and their joints compatible with plastic on cleaned surfaces (PVC or PE) piping systems, for water F applications and for plastic pipeline ISO Preparation of steel substrates before connections, repair and replacement 8502-3:2017 application of paints and related prod- ucts — Tests for the assessment of B TC 20 Aircraft and space vehicles surface cleanliness — Part 3: Assess- ISO * Aircraft ground equipment — Passen- ment of dust on steel surfaces pre- 16004:2017 ger boarding bridge or transfer vehicle pared for painting (pressure-sensitive — Interface requirements with aircraft A tape method) doors ISO Preparation of steel substrates before TC 22 Road vehicles 8502-4:2017 application of paints and related prod- ucts — Tests for the assessment of D ISO/PAS * Electrically propelled road vehicles surface cleanliness — Part 4: Guidance 19363:2017 — Magnetic field wireless power on the estimation of the probability of transfer — Safety and interoperability G condensation prior to paint application requirements ISO * Road vehicles — Compressed natural TC 38 Textiles 14469:2017 gas (CNG) refuelling connector ISO Textiles — Methods for determination F 14362-1:2017 of certain aromatic amines derived from azo colorants — Part 1: Detec- E tion of the use of certain azo colorants TC 23 Tractors and machinery for agri- accessible with and without extracting culture and forestry the fibres 12 ISO Update, Supplement to ISO Focus -- February 2017 ISO Textiles — Methods for determination ISO * Nuclear Energy — Fuel technology — 14362-3:2017 of certain aromatic amines derived 21484:2017 Determination of the O/M ratio in MOX from azo colorants — Part 3: Detec- C pellets by the gravimetric method A tion of the use of certain azo colorants, which may release 4-aminoazobenzene TC 92 Fire safety TC 41 Pulleys and belts (including ISO/TS Controlled equivalence ratio method veebelts) 19700:2016 for the determination of hazardous ISO 703:2017 Conveyor belts — Transverse flexibility components of fire effluents — Steady- F (troughability) — Test method state tube furnace A TC 94 Personal safety -- Protective clothing and equipment ISO Steel cord conveyor belts — Part 2: ISO Protective gloves against dangerous 15236-2:2017 Preferred belt types 374-1:2016 chemicals and micro-organisms — A Part 1: Terminology and performance B requirements for chemical risks TC 42 Photography ISO Protective gloves against dangerous ISO * Photography — Electronic still picture 374-5:2016 chemicals and micro-organisms — 12233:2017 imaging — Resolution and spatial Part 5: Terminology and performance A frequency responses F requirements for micro-organisms risks TC 111 Round steel link chains, chain TC 43 Acoustics slings, components and ISO 7029:2017 Acoustics — Statistical distribution of accessories hearing thresholds related to age and ISO/TR * Toughness of round steel link chains — gender D 21704:2017 Test with sub-size specimens F TC 44 Welding and allied processes ISO * Welding for aerospace applications — TC 120 Leather 16338:2017 Resistance spot and seam welding ISO/TR * Leather — Raw cattle hides and calf F 2822-2:2017 skins — Part 2: Guidelines for grading on the basis of mass B TC 45 Rubber and rubber products ISO 6134:2017 Rubber hoses and hose assemblies for ISO/TR * Leather — Raw cattle hides and calf saturated steam — Specification 2822-3:2017 skins — Part 3: Guidelines for grading B on the basis of defects B ISO 1437:2017 Rubber compounding ingredients — TC 127 Earth-moving machinery Carbon black — Determination of sieve ISO * Earth-moving machinery — Symbols residue B 6405-1:2017 for operator controls and other dis- plays — Part 1: Common symbols H TC 58 Gas cylinders ISO 11114- Gas cylinders — Compatibility of ISO * Earth-moving machinery — Sym- 1:2012/Amd cylinder and valve materials with gas 6405-2:2017 bols for operator controls and other 1:2017 contents — Part 1: Metallic materials XZ displays — Part 2: Symbols for specific G — Amendment 1 machines, equipment and accessories TC 61 Plastics TC 135 Non-destructive testing ISO Plastics — Biobased content — Part ISO 5577:2017 Non-destructive testing — Ultrasonic 16620-5:2017 5: Declaration of biobased carbon testing — Vocabulary content, biobased synthetic polymer B A content and biobased mass content TC 83 Sports and other recreational ISO * Non-destructive testing — Radiation 15708-4:2017 methods for computed tomography — facilities and equipment Part 4: Qualification B ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test ISO * Non-destructive testing — Infrared methods D 10880:2017 thermographic testing — General principles B TC 85 Nuclear energy, nuclear tech- nologies, and radiological ISO * Non-destructive testing — Infrared protection 18251-1:2017 thermography — Part 1: Characteris- ISO Surveillance of the activity concentra- tics of system and equipment B 16639:2017 tions of airborne radioactive substanc- es in the workplace of nuclear facilities E TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO Measurement and prediction of the ISO Plastics piping systems for hot and 18310-1:2017 ambient dose equivalent from patients 15876-1:2017 cold water installations — Polybutene receiving iodine 131 administration D (PB) — Part 1: General B after thyroid ablation — Part 1: During the hospitalization ISO Update, Supplement to ISO Focus -- February 2017 13 ISO Plastics piping systems for hot and ISO 18400- * Soil quality — Sampling — Part 201: 15876-2:2017 cold water installations — Polybutene 201:2017 Physical pretreatment in the field (PB) — Part 2: Pipes C D ISO Plastics piping systems for hot and ISO 18400- * Soil quality — Sampling — Part 204: 15876-3:2017 cold water installations — Polybutene 204:2017 Guidance on sampling of soil gas (PB) — Part 3: Fittings C G ISO Plastics piping systems for hot and TC 204 Intelligent transport systems 15876-5:2017 cold water installations — Polybutene ISO/TS * Intelligent transport systems — Traffic (PB) — Part 5: Fitness for purpose of B 21219-24:2017 and travel information (TTI) via trans- the system port protocol experts group, generation F TC 142 Cleaning equipment for air and 2 (TPEG2) — Part 24: Light encryption other gases (TPEG2-LTE) ISO Air filters for general ventilation — Part ISO/TS * Intelligent transport systems — Traffic 16890-1:2016 1: Technical specifications, require- 21219-25:2017 and travel information (TTI) via trans- ments and classification system based E port protocol experts group, generation G upon particulate matter efficiency 2 (TPEG2) — Part 25: Electromobility (ePM) charging infrastructure (TPEG2-EMI) ISO Air filters for general ventilation — Part TC 206 Fine ceramics 16890-2:2016 2: Measurement of fractional efficiency ISO * Fine ceramics (advanced ceramics, and air flow resistance G 19606:2017 advanced technical ceramics) — Test method for surface roughness of D ISO Air filters for general ventilation — Part fine ceramic films by atomic force 16890-3:2016 3: Determination of the gravimetric microscopy efficiency and the air flow resistance D ISO * Fine ceramics (advanced ceramics, versus the mass of test dust captured 19722:2017 advanced technical ceramics) — Test ISO Air filters for general ventilation — Part method for determination of photo- C 16890-4:2016 4: Conditioning method to determine catalytic activity on semiconducting the minimum fractional test efficiency B photocatalytic materials by dissolved oxygen consumption TC 150 Implants for surgery ISO * Fine ceramics (advanced ceramics, 20343:2017 advanced technical ceramics) — ISO Cardiovascular implants — Endovas- Test method for determining elastic B 25539-1:2017 cular devices — Part 1: Endovascular modulus of thick ceramic coatings at prostheses H elevated temperature TC 211 Geographic information/ TC 165 Timber structures Geomatics ISO * Timber structures — Determination of ISO Geographic information — Methodol- 12122-4:2017 characteristic values — Part 4: Engi- 19110:2016 ogy for feature cataloguing neered wood products B G TC 190 Soil quality TC 213 Dimensional and geometrical ISO 18400- Soil quality — Sampling — Part 100: product specifications and 100:2017 Guidance on the selection of sampling verification standards A ISO Geometrical product specifications 1938-2:2017 (GPS) — Dimensional measuring ISO 18400- * Soil quality — Sampling — Part 101: equipment — Part 2: Reference disk B 101:2017 Framework for the preparation and ap- gauges plication of a sampling plan C TC 215 Health informatics ISO 18400- * Soil quality — Sampling — Part 102: ISO Health informatics 102:2017 Selection and application of sampling 25237:2017 — Pseudonymization techniques G G ISO 18400- * Soil quality — Sampling — Part 103: TC 238 Solid biofuels 103:2017 Safety ISO Solid biofuels — Determination of E 18134-2:2017 moisture content — Oven dry method — Part 2: Total moisture — Simplified A ISO 18400- * Soil quality — Sampling — Part 105: method 105:2017 Packaging, transport, storage and TC 249 Traditional chinese medicine preservation of samples B ISO * Traditional Chinese medicine — Panax 20408:2017 notoginseng seeds and seedlings ISO 18400- * Soil quality — Sampling — Part 106: B 106:2017 Quality control and quality assurance B TC 268 Sustainable cities and ISO 18400- * Soil quality — Sampling — Part 107: communities 107:2017 Recording and reporting ISO/TR * Sustainable development in communi- B 37121:2017 ties — Inventory of existing guidelines and approaches on sustainable devel- H opment and resilience in cities 14 ISO Update, Supplement to ISO Focus -- February 2017 TC 292 Security and resilience ISO/IEC * Information technology — Coding of 14496- audio-visual objects — Part 22: Open ISO/TS Societal security — Business continuity 22:2015/Amd Font Format — Amendment 1: Up- XZ 22317:2015 management systems — Guidelines for 1:2017 dates for font collections functionality business impact analysis (BIA) E ISO/IEC * Information technology — Multimedia 23000- application format (MPEG-A) — Part IULTCS International Union of Leather 15:2016/Amd 15: Multimedia preservation application F Technologists and Chemists 1:2017 format — Amendment 1: Implementa- Societies tion guidelines for MP-AF ISO 2418:2017 Leather — Chemical, physical and ISO/IEC * Information technology — MPEG video mechanical and fastness tests — Sam- 23002-5:2013/ technologies — Part 5: Reconfigura- pling location B Amd 2:2017 ble media coding conformance and XZ reference software — Amendment 2: ISO 2420:2017 Leather — Physical and mechanical Reference software for HEVC-related tests — Determination of apparent VTL extensions density and mass per unit area A ISO/IEC * Information technology — Media con- 23005-7:2017 text and control — Part 7: Conform- ISO 4044:2017 Leather — Chemical tests — Prepara- ance and reference software F tion of chemical test samples A ISO/IEC * Information technology — High ef- 23008-3:2015/ ficiency coding and media delivery in ISO Leather — Physical and mechanical Amd 3:2017 heterogeneous environments — Part 3: H 17232:2017 tests — Determination of heat resist- 3D audio — Amendment 3: MPEG-H ance of patent leather B 3D Audio Phase 2 ISO/IEC * Information technology — Cross- ISO Leather — Physical and mechanical 24779-4:2017 jurisdictional and societal aspects of 17233:2017 tests — Determination of cold crack implementation of biometric technolo- F temperature of surface coatings B gies — Pictograms, icons and symbols for use with biometric systems — Part 4: Fingerprint applications CASCO Committee on conformity assessment ISO/IEC Conformity assessment — Require- 17021-2:2016 ments for bodies providing audit and certification of management systems B — Part 2: Competence requirements for auditing and certification of environ- JTC 1 mental management systems Information technology Standards confirmed ISO/IEC * Identification cards — Identification of 7812-1:2017 issuers — Part 1: Numbering system The following International Standards are confimred for a five year B period: ISO/IEC * Identification cards — Identification 7812-2:2017 of issuers — Part 2: Application and TC 6 Paper, board and pulps registration procedures B ISO 776:2011 ISO 5269-3:2008 (reconfirmed) ISO/IEC * Information technology — Digi- ISO 11093-7:2011 30192:2016 tally recorded media for information interchange and storage — 120 mm H ISO 3781:2011 Single Layer (25,0 Gbytes per disk) and ISO 12192:2011 Dual Layer (50,0 Gbytes per disk) BD Rewritable disk ISO 16532-3:2010 ISO/IEC * Information technology — Small TC 17 Steel 14776- computer system interface (SCSI) — ISO 16650:2004 (reconfirmed) 323:2017 Part 323: SCSI Block commands — 3 H (SBC-3) ISO 22034-1:2007 (reconfirmed) ISO/IEC * Information technology — Office TC 20 Aircraft and space vehicles 19752:2017 equipment — Method for the deter- ISO 5065-1:1986 (reconfirmed) mination of toner cartridge yield for D ISO 12384:2010 monochromatic electrophotographic printers and multi-function devices that ISO 6967:2006 contain printer components ISO 10841:1996 (reconfirmed) ISO/IEC * Information technology — Office ISO 11995:1996 (reconfirmed) 19798:2017 equipment — Method for the determi- nation of toner cartridge yield for col- D ISO 12056:1996 (reconfirmed) our printers and multi-function devices ISO 1749:1973 (reconfirmed) that contain printer components ISO 15888:2000 (reconfirmed) ISO/IEC * Information technology — Coding 14496-5:2001/ of audio-visual objects — Part 5: TC 29 Small tools Amd 24:2009/ Reference software — Amendment 24: free ISO 236-1:1976 Cor 3:2017 Reference software for AAC-ELD — Technical Corrigendum 3 ISO 6751:2011 ISO Update, Supplement to ISO Focus -- February 2017 15 ISO 6752:2008 (reconfirmed) TC 67 Materials, equipment and offshore ISO 8693:2011 structures for petroleum, petrochemi- cal and natural gas industries ISO 8694:2011 ISO 15546:2011 ISO 9183-1:2008 (reconfirmed) ISO 15136-2:2006 (reconfirmed) ISO 9183-2:2011 ISO 10242-1:2011 TC 69 Applications of statistical methods ISO 3951-4:2011 ISO 10907-2:2007 (reconfirmed) ISO 12165:2000 (reconfirmed) TC 79 Light metals and their alloys ISO 16366:2008 (reconfirmed) ISO 791:1973 (reconfirmed) ISO 16367:2008 (reconfirmed) ISO 792:1973 (reconfirmed) ISO 18084:2011 ISO 793:1973 (reconfirmed) ISO 24233:2008 (reconfirmed) ISO 794:1976 (reconfirmed) ISO 795:1976 (reconfirmed) TC 31 Tyres, rims and valves ISO 796:1973 (reconfirmed) ISO 4249-1:1985 (reconfirmed) ISO 797:1973 (reconfirmed) ISO 4249-2:1990 (reconfirmed) ISO 808:1973 (reconfirmed) ISO 4249-3:2010 ISO 809:1973 (reconfirmed) ISO 6054-1:1994 (reconfirmed) ISO 810:1973 (reconfirmed) ISO 6054-2:1990 (reconfirmed) ISO 886:1973 (reconfirmed) TC 33 Refractories ISO 1118:1978 (reconfirmed) ISO 836:2001 (reconfirmed) ISO 1178:1976 (reconfirmed) ISO 5417:1986 (reconfirmed) ISO 1783:1973 (reconfirmed) ISO 8841:1991 (reconfirmed) ISO 1784:1976 (reconfirmed) ISO 12677:2011 ISO 1975:1973 (reconfirmed) ISO 12678-1:1996 (reconfirmed) ISO 2297:1973 (reconfirmed) ISO 12678-2:1996 (reconfirmed) ISO 2353:1972 (reconfirmed) ISO 21079-1:2008 (reconfirmed) ISO 2354:1976 (reconfirmed) ISO 21079-2:2008 (reconfirmed) ISO 2355:1972 (reconfirmed) ISO 21079-3:2008 (reconfirmed) ISO 3255:1974 (reconfirmed) TC 34 Food products ISO 3256:1977 (reconfirmed) ISO 1956-2:1989 (reconfirmed) ISO 3978:1976 (reconfirmed) ISO 6477:1988 (reconfirmed) ISO 3980:1977 (reconfirmed) ISO 7701:1994 (reconfirmed) ISO 3981:1977 (reconfirmed) ISO 973:1999 (reconfirmed) ISO 4192:1981 (reconfirmed) ISO 3632-1:2011 ISO 4193:1981 (reconfirmed) ISO 3632-2:2010 ISO 4194:1981 (reconfirmed) ISO 5565-1:1999 (reconfirmed) ISO 5194:1981 (reconfirmed) TC 38 Textiles ISO 5196-1:1980 (reconfirmed) ISO 5077:2007 (reconfirmed) ISO 5196-2:1980 (reconfirmed) TC 44 Welding and allied processes ISO 6361-1:2011 ISO/TS (reconfirmed) 17845:2004 ISO 7271:2011 ISO 10882-1:2011 TC 91 Surface active agents ISO 15011-5:2011 ISO 2456:1986 (reconfirmed) TC 46 Information and documentation ISO 2868:1973 (reconfirmed) ISO 25964-1:2011 ISO 2869:1973 (reconfirmed) TC 54 Essential oils ISO 2870:2009 (reconfirmed) ISO 3140:2011 ISO 2871-1:2010 (reconfirmed) ISO 3756:1976 (reconfirmed) ISO 2871-2:2010 (reconfirmed) ISO 19332:2007 (reconfirmed) ISO 4198:1984 (reconfirmed) ISO 4311:1979 (reconfirmed) TC 60 Gears ISO 4312:1989 (reconfirmed) ISO 9083:2001 (reconfirmed) ISO 4313:1976 (reconfirmed) ISO 13691:2001 (reconfirmed) ISO 4314:1977 (reconfirmed) ISO 14635-1:2000 (reconfirmed) ISO 4315:1977 (reconfirmed) TC 61 Plastics ISO 21367:2007 (reconfirmed) TC 107 Metallic and other inorganic coatings ISO 2093:1986 (reconfirmed) 16 ISO Update, Supplement to ISO Focus -- February 2017 ISO 2179:1986 (reconfirmed) ISO 14469-3:2006 (replaced by ISO 14469:2017) ISO 4524-6:1988 (reconfirmed) TC 38 Textiles ISO 7587:1986 (reconfirmed) ISO 24362-1:2014 (replaced by ISO 14362-1:2017) ISO 9587:2007 (reconfirmed) ISO 24362-3:2014 (replaced by ISO 14362-3:2017) ISO 12686:1999 (reconfirmed) TC 190 Soil quality TC 113 Hydrometry ISO 10381-2:2002 (replaced by ISO 18400-102:2017) ISO 14139:2000 (reconfirmed) ISO 10381-3:2001 (replaced by ISO 18400-103:2017) TC 123 Plain bearings ISO 10381-7:2005 (replaced by ISO 18400-204:2017) ISO 4385:1981 (reconfirmed) TC 204 Intelligent transport systems ISO 6281:2007 (reconfirmed) ISO/TS (replaced by ) ISO 12129-1:1995 (reconfirmed) 17931:2013 ISO 12129-2:1995 (reconfirmed) JTC 1 Information technology ISO 3547-5:2007 (reconfirmed) ISO/IEC (replaced by ISO/IEC 14776-323:2017) 14776-232:2001 ISO 3547-6:2007 (reconfirmed) ISO/IEC (replaced by ) ISO 3547-7:2007 (reconfirmed) 15444-12:2015 TC 134 Fertilizers and soil conditioners ISO/TR 5307:1991 TC 145 Graphical symbols ISO 20712-1:2008 (reconfirmed) TC 146 Air quality ISO 11057:2011 Meeting calendar ISO 25139:2011 TC 147 Water quality (update at 01 January 2017) ISO 11206:2011 Meetings called for the month of December are not in this edition. ISO 28540:2011 * Information definite but meeting not yet formally convened TC 159 Ergonomics ** Provisional ISO (reconfirmed) 9241-151:2008 ISO February 2017 9241-420:2011 5-7 Beijing (China) TC 79/SC 11 Light metals and their ISO alloys/Titanium 9241-910:2011 6-10 Tunis (Tunisia) JTC 1/SC 6 Information technol- ISO 11064-5:2008 (reconfirmed) ogy/Telecommunica- tions and information ISO/TS exchange between 20282-2:2013 systems TC 168 Prosthetics and orthotics 6-10 Berlin (Germany) JTC 1/SC 35 Information technol- ISO 22523:2006 (reconfirmed) ogy/User interfaces TC 191 Animal (mammal) traps 6-12 Pretoria (South TC 58/SC 4 Gas cylinders/Opera- Africa) tional requirements ISO 10990-4:1999 for gas cylinders ISO 10990-5:1999 10 St. Petersburg, TC 213 Dimensional and TC 194 Biological and clinical evaluation of Florida (USA) geometrical product medical devices specifications and verification ISO/TS (reconfirmed) 10993-19:2006 10 Budapest TC 267 Facility management (Hungary) 14 Geneva CSC/SPC Council/Strategy and (Switzerland) Policy Committee (CSC/SPC) 15 Geneva President's President's (Switzerland) committee committee Standards withdrawn 17 Galveston (USA) TC 304 Healthcare administration 20 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment Period from 01 January to 31 January 2017 20-22 London (United TC 8/SC 8 Ships and marine Kingdom) technology/Ship TC 22 Road vehicles design ISO 14469-1:2004 (replaced by ISO 14469:2017) 21-22 Kuala Lumpur TMB Technical Manage- (Malaysia) ment Board ISO 14469-2:2007 (replaced by ISO 14469:2017) ISO Update, Supplement to ISO Focus -- February 2017 17 22-24 Paris (France) TC 147/SC 3 Water qual- 30 Toronto (Canada) TC 23/SC 7 Tractors and machin- ity/Radioactivity ery for agriculture and measurements forestry/Equipment for harvesting and 24 Vancouver TC 22/SC 41 Road vehicles/Spe- conservation (Canada) cific aspects for gase- ous fuels 30 Pau (France) TC 67/SC 3 Materials, equipment and offshore struc- 24-26 St. John, TC 121/SC 4 Anaesthetic and res- tures for petroleum, Newfoundland piratory equipment/ petrochemical and (Canada) Terminology and natural gas industries/ semantics Drilling and comple- February-March 2017 tion fluids, and well 28-2 Tokyo (Japan) JTC 1/SC 34 Information tech- cements nology/Document 30-31 Toronto (Canada) TC 23/SC 3 Tractors and machin- description and pro- ery for agriculture and cessing languages forestry/Safety and comfort March 2017 30-31 Sao Paulo TC 199 Safety of machinery 6 Kyoto (Japan) TC 60 Gears (Brazil) 6 Kyoto (Japan) TC 60/SC 1 Gears/Nomenclature 31 Tsukuba (Japan) TC 92 Fire safety and wormgearing 6 Kyoto (Japan) TC 60/SC 2 Gears/Gear capacity April 2017 calculation 1 Tokyo (Japan) TC 225 Market, opinion and 7-8 Coventry (United TC 44/SC 14 Welding and allied social research Kingdom) processes/Weld- 3-4 Chicago (USA) TC 117 Fans ing and brazing in 3-5 Sydney TC 307 Blockchain and aerospace (Australia) electronic distributed 8-9 Madrid (Spain) * TC 20/SC 16 Aircraft and space ledger technologies vehicles/Unmanned 3-7 Milan (Italy) PC 302 Guidelines for audit- aircraft systems ing management 14 Geneva President's President's systems (Switzerland) committee committee 3-7 London (United TC 133 Clothing sizing sys- 15 Geneva CSC/FIN Council/Council Kingdom) tems - size designa- (Switzerland) Standing Committee tion, size measure- on Finance (CSC/FIN) ment methods and 15-16 London (United TC 94 Personal safety -- digital fittings Kingdom) Protective clothing 4 Stockholm TC 118/SC 6 Compressors and and equipment (Sweden) pneumatic tools, 16-17 Geneva COUNCIL Council machines and equip- (Switzerland) ment/Air compressors and compressed air 20-24 Leeds (United TC 94/SC 13 Personal safety -- systems Kingdom) Protective clothing and equipment/Pro- 5 Stockholm TC 118/SC 3 Compressors and tective clothing (Sweden) pneumatic tools, machines and equip- 22-24 Kingston TC 93 Starch (includ- ment/Pneumatic tools (Jamaica) ing derivatives and and machines by-products) 6 Stockholm TC 118 Compressors and 27-31 Chengdu (China) JTC 1/SC 38 Information technol- (Sweden) pneumatic tools, ma- ogy/Cloud Comput- chines and equipment ing and Distributed Platforms 6 Stockholm TC 118/SC 4 Compressors and (Sweden) pneumatic tools, 27-31 Brisbane TC 251 Asset management machines and equip- (Australia) ment/Compressed air 28 Toronto (Canada) TC 23/SC 4 Tractors and machin- treatment technology ery for agriculture and 7 Irvine (USA) TC 110/SC 4 Industrial trucks/ forestry/Tractors Rough-terrain trucks 29 Virtual * TC 20/SC 17 Aircraft and space 10 Guilin (China) TC 29/SC 8 Small tools/Tools (Unknown) vehicles/Airport for pressing and infrastructure moulding 29 Philadelphia TC 219 Floor coverings 11 Toulouse TC 31/SC 5 Tyres, rims and (USA) (France) valves/Agricultural 29-30 Harbin (China) TC 44/SC 5 Welding and allied tyres and rims processes/Testing 12 Toulouse TC 31/SC 6 Tyres, rims and and inspection of (France) valves/Off-the-road welds tyres and rims 29-30 Paris (France) TC 182 Geotechnics 13 Toulouse TC 31/SC 7 Tyres, rims and 30 Toronto (Canada) TC 23/SC 2 Tractors and machin- (France) valves/Industrial tyres ery for agriculture and and rims forestry/Common 17-21 Hangzhou TC 215 Health informatics tests (China) 18 ISO Update, Supplement to ISO Focus -- February 2017 24-25 Hamilton (New JTC 1/SC 27 Information tech- 8-12 Vienna (Austria) TC 39/SC 2 Machine tools/Test Zealand) nology/IT Security conditions for metal techniques cutting machine tools 24-28 Minneapolis TC 198 Sterilization of health 8-12 Seoul (Korea, * TC 161 Controls and protec- (USA) care products Republic of) tive devices for gas and/or oil 24-28 Jeju (Korea, TC 292 Security and Republic of) resilience 8-12 Berlin (Germany) ** TC 171 Document manage- ment applications 26 Orlando (USA) TC 34/SC 2 Food products/Ole- aginous seeds and 9 Stockholm TC 10/SC 6 Technical product fruits and oilseed (Sweden) documentation/Me- meals chanical engineering documentation 26 London (United TC 67/SC 2 Materials, equipment Kingdom) and offshore struc- 9 Stockholm TC 10/SC 8 Technical prod- tures for petroleum, (Sweden) uct documenta- petrochemical and tion/Construction natural gas industries/ documentation Pipeline transporta- 10 Stockholm TC 10/SC 1 Technical product tion systems (Sweden) documentation/Basic 26-27 Vancouver CASCO Committee on con- conventions (Canada) formity assessment 11-12 Karamay (China) TC 265 Carbon dioxide 26-27 Saint-Denis TC 17/SC 3 Steel/Steels for struc- capture, transporta- (France) tural purposes tion, and geological storage 27 Frankfurt TC 23/SC 19 Tractors and machin- (Germany) ery for agriculture and 12 Berlin (Germany) TC 171/SC 2 Document manage- forestry/Agricultural ment applications/ electronics Document file for- mats, EDMS systems 27 Virtual TC 67/SC 9 Materials, equipment and authenticity of (Unknown) and offshore struc- information tures for petroleum, petrochemical and 13 Seoul (Korea, * TC 276 Biotechnology natural gas industries/ Republic of) Liquefied natural 15 Atlanta (USA) TC 4/SC 11 Rolling bearings/ gas installations and Linear motion rolling equipment bearings 27-28 Orlando (USA) TC 34/SC 11 Food products/ 15 Stockholm TC 29/SC 9 Small tools/Tools Animal and vegetable (Sweden) with defined cutting fats and oils edges, cutting items 27-28 London (United * TC 44/SC 8 Welding and allied 15 Berlin (Germany) TC 44/SC 10 Welding and allied Kingdom) processes/Equip- processes/Quality ment for gas welding, management in the cutting and allied field of welding processes 15 Rio de Janeiro TC 68/SC 4 Financial services/ (Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa (Brazil) Securities and related April-September 2017 financial instruments 24-26 Vienna (Austria) ** TC 289 Brand evaluation 15 Chicago (USA) * TC 192 Gas turbines May 2017 15-19 Atlanta (USA) * TC 4 Rolling bearings 3 Virtual * TC 22/SC 31 Road vehicles/Data 15-19 Atlanta (USA) * TC 4/SC 7 Rolling bearings/ (Unknown) communication Spherical plain bearings 3-4 Delft TC 226 Materials for the (Netherlands) production of primary 15-19 Seattle (USA) TC 31 Tyres, rims and valves aluminium 15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and 7-12 Oslo (Norway) TC 184/SC 4 Automation systems valves/Passenger car and integration/Indus- tyres and rims trial data 15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and 8 San Antonio * TC 131 Fluid power systems valves/Cycle, moped, (USA) motorcycle tyres and rims 8 Berlin (Germany) TC 171/SC 1 Document manage- ment applications/ 15-19 Copenhagen TC 43 Acoustics Quality, preserva- (Denmark) tion and integrity of 15-19 Copenhagen TC 43/SC 1 Acoustics/Noise information (Denmark) 8-11 Madrid (Spain) * TC 272 Forensic sciences 15-19 Copenhagen * TC 43/SC 2 Acoustics/Building 8-12 Stockholm TC 10 Technical product (Denmark) acoustics (Sweden) documentation 15-19 Rio de Janeiro TC 68 Financial services 8-12 Gothenburg TC 22/SC 39 Road vehicles/ (Brazil) (Sweden) Ergonomics 16 Atlanta (USA) TC 4/SC 5 Rolling bearings/ 8-12 (Netherlands) ** TC 35 Paints and varnishes Needle, cylindrical and spherical roller bearings ISO Update, Supplement to ISO Focus -- February 2017 19 16 Stockholm TC 29/SC 2 Small tools/Holding 22-26 Faro, Algarve TC 282/SC 2 Water reuse/Water (Sweden) tools, adaptive items (Portugal) reuse in urban areas and interfaces 22-26 Quebec City * TC 309 Governance of 16 San Antonio * TC 131/SC 7 Fluid power systems/ (Canada) organizations (USA) Sealing devices 23-24 Faro, Algarve TC 282/SC 1 Water reuse/Treated 17 Rio de Janeiro * TC 68/SC 2 Financial services/ (Portugal) wastewater reuse for (Brazil) Financial Services, Irrigation security 23-25 Tokyo (Japan) TC 8/SC 1 Ships and marine 17-19 Tokyo (Japan) * TC 8/SC 13 Ships and marine technology/Lifesaving technology/Marine and fire protection technology 24-25 Pretoria (South TC 46/SC 4 Information and 17-19 Philadelphia * TC 86/SC 6 Refrigeration and Africa) documentation/Tech- (USA) air-conditioning/ nical interoperability Testing and rating of 25 Pretoria (South TC 46/SC 10 Information and air-conditioners and Africa) documentation/ heat pumps Requirements for 18 Atlanta (USA) * TC 4/SC 4 Rolling bearings/ document storage Tolerances, tolerance and conditions for definitions and sym- preservation bols (including GPS) 25-26 Frankfurt * TC 184/SC 5 Automation systems 18 Atlanta (USA) TC 4/SC 8 Rolling bearings/Load (Germany) and integration/Inter- ratings and life operability, integra- tion, and architec- 18 Atlanta (USA) TC 4/SC 9 Rolling bearings/Ta- tures for enterprise pered roller bearings systems and automa- 18 Atlanta (USA) * TC 4/SC 12 Rolling bearings/Ball tion applications bearings 26 Pretoria (South TC 46 Information and 18 Jeju (Korea, TC 67/SC 5 Materials, equipment Africa) documentation Republic of) and offshore struc- 29 Gyeongju (Ko- * TC 17/SC 15 Steel/Railway rails, tures for petroleum, rea, Republic of) rails fasteners, wheels petrochemical and and wheelsets natural gas industries/ Casing, tubing and 29-30 Tokyo (Japan) TC 24/SC 4 Particle charac- drill pipe terization includ- ing sieving/Particle 18 Berlin (Germany) TC 83 Sports and other characterization recreational facilities and equipment (Japan) ** JTC 1/SC 32 Information technolo- gy/Data management 18 West Consho- TC 85/SC 5 Nuclear energy, and interchange hocken (Phila- nuclear technolo- delphia) (USA) gies, and radiological Berlin (Germany) ** TC 44/SC 11 Welding and allied protection/Nuclear in- processes/Qualifica- stallations, processes tion requirements for and technologies welding and allied processes personnel 18-19 Kuala Lumpur COPOLCO Committee on con- (Malaysia) sumer policy May-June 2017 18-19 Berlin (Germany) ** TC 44/SC 3 Welding and allied 27-2 (Ireland) ** TC 238 Solid biofuels processes/Welding 29-2 Okayama JTC 1/SC 40 Information tech- consumables (Japan) nology/IT Service 18-19 West Consho- TC 85/SC 6 Nuclear energy, Management and IT hocken (Phila- nuclear technolo- Governance delphia) (USA) gies, and radiological 29-2 Stockholm * TC 211 Geographic in- protection/Reactor (Sweden) formation/ technology Geomatics 19 Stockholm TC 29 Small tools 31-2 Delft * TC 145 Graphical symbols (Sweden) (Netherlands) 22-23 Faro, Algarve ** TC 282/SC 3 Water reuse/Risk and (Portugal) performance evalu- June 2017 ation of water reuse 5 Jeju (Korea, * TC 156/SC 1 Corrosion of metals systems Republic of) and alloys/Corrosion control engineering 22-26 Pretoria (South TC 46/SC 9 Information and life cycle Africa) documentation/ Identification and 5-8 Hong Kong * TC 249 Traditional chinese description (Hong Kong, medicine China) 22-26 Pretoria (South * TC 46/SC 11 Information and doc- Africa) umentation/Archives/ 5-9 Fort Collins * TC 23/SC 18 Tractors and machin- records management (USA) ery for agriculture and forestry/Irrigation and 22-26 Boston (USA) TC 121 Anaesthetic and res- drainage equipment piratory equipment and systems 22-26 Panama TC 228 Tourism and related 5-9 Santa Clara TC 42 Photography (Panama) services (USA) 20 ISO Update, Supplement to ISO Focus -- February 2017 5-9 (Unknown) ** TC 268 Sustainable cities and 19-23 Cape Town * TC 69/SC 7 Applications of communities (South Africa) statistical methods/ Applications of 5-9 (Unknown) ** TC 268/SC 1 Sustainable cities statistical and related and communities/ techniques for the Smart community implementation of Six infrastructures Sigma 6-9 Delft ** TC 274 Light and lighting 19-23 Cape Town * TC 69/SC 8 Applications of sta- (Netherlands) (South Africa) tistical methods/Ap- 7 Marseille * TC 29/SC 5 Small tools/Grinding plication of statistical (France) wheels and abrasives and related methodol- 7-8 Düsseldorf TC 17/SC 10 Steel/Steel for pres- ogy for new technol- (Germany) sure purposes ogy and product development 8-9 Hamburg TC 8/SC 7 Ships and marine (Germany) technology/Inland 19-23 London (United TC 108/SC 5 Mechanical vibration, navigation vessels Kingdom) shock and condition monitoring/Condition 8-9 Cambridge (Unit- * TC 67/SC 7 Materials, equipment monitoring and diag- ed Kingdom) and offshore struc- nostics of machine tures for petroleum, systems petrochemical and natural gas industries/ 19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and Offshore structures major sub-assemblies 9 Chicago (USA) * TC 136 Furniture 23-30 (Australia) ** JTC 1/SC 36 Information tech- nology/Information 9 Jeju (Korea, * TC 156 Corrosion of metals technology for learn- Republic of) and alloys ing, education and 11-16 Hiroshima City * TC 127 Earth-moving training (Japan) machinery 25-30 Vienna (Austria) TC 37 Terminology and 12-16 Paris (France) TC 20/SC 14 Aircraft and space ve- other language and hicles/Space systems content resources and operations 26-27 Stockholm ** TC 184 Automation systems 13 Geneva CSC/SPC Council/Strategy and (Sweden) and integration (Switzerland) Policy Committee 26-28 El Segundo * TC 20/SC 9 Aircraft and space (CSC/SPC) (USA) vehicles/Air cargo and 14 Shanghai (China) * TC 30/SC 5 Measurement of ground equipment fluid flow in closed 26-29 Ise (Japan) * TC 20/SC 1 Aircraft and conduits/Velocity and space vehicles/ mass methods Aerospace electrical 14 (USA) ** TC 220 Cryogenic vessels requirements 14-15 Geneva ** TMB Technical Manage- 26-30 Shanghai (China) TC 29/SC 10 Small tools/Assem- (Switzerland) ment Board bly tools for screws and nuts, pliers and 15-16 Toronto (Canada) * TC 298 Rare earth nippers 15-22 London (United * JTC 1/SC 28 Information technol- 26-30 London (United * TC 94/SC 4 Personal safety -- Kingdom) ogy/Office equipment Kingdom) Protective clothing 19 (South Africa) ** PC 305 Sustainable non- and equipment/ sewered sanitation Personal equipment systems for protection against falls 19-20 Stockholm * TC 22/SC 32 Road vehicles/Elec- (Sweden) trical and electronic 26-30 London (United * TC 94/SC 14 Personal safety -- components and gen- Kingdom) Protective clothing eral system aspects and equipment/ Firefighters' personal 19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/ equipment Microbiology 26-30 Washington, D.C * TC 193 Natural gas 19-23 Cape Town * TC 69 Applications of statis- (USA) (South Africa) tical methods 26-30 Washington, D.C * TC 193/SC 1 Natural gas/Analysis 19-23 Cape Town * TC 69/SC 1 Applications of statis- (USA) of natural gas (South Africa) tical methods/Termi- nology and symbols 26-30 Washington, D.C * TC 193/SC 3 Natural gas/Upstream (USA) area 19-23 Cape Town * TC 69/SC 4 Applications of (South Africa) statistical methods/ 27-28 Qingdao (China) President's President's Applications of committee committee statistical methods in 27-29 Berlin (Germany) * REMCO Committee on refer- product and process ence materials management 27-29 Paignton (United * TC 8/SC 2 Ships and marine 19-23 Cape Town * TC 69/SC 6 Applications of statis- Kingdom) technology/Ma- (South Africa) tical methods/Meas- rine environment urement methods and protection results Shanghai (China) ** TC 30 Measurement of fluid flow in closed conduits ISO Update, Supplement to ISO Focus -- February 2017 21 Shanghai (China) ** TC 30/SC 2 Measurement of 11-15 Gaithersburg * TC 108/SC 6 Mechanical vibration, fluid flow in closed (USA) shock and condition conduits/Pressure monitoring/Vibration differential devices and shock generating systems Chennai (India) ** TC 120 Leather 11-15 Bali (Indonesia) * TC 176 Quality management 2nd Quarter 2017 and quality assurance Paris (France) * TC 297 Waste management, 11-15 Melbourne * TC 258 Project, programme recycling and road (Australia) and portfolio operation service management July 2017 14-15 Bali (Indonesia) * TC 260 Human resource 3-7 Harbin (China) * TC 44 Welding and allied management processes 17 Berlin (Germany) President's President's 3-7 Harbin (China) * TC 44/SC 7 Welding and allied committee committee processes/Represen- 17-22 Seoul (Korea, * TC 61 Plastics tation and terms Republic of) 3-7 Harbin (China) * TC 44/SC 9 Welding and allied 17-22 Seoul (Korea, * TC 164 Mechanical testing of processes/Health and Republic of) metals safety 18 Berlin (Germany) * COUNCIL Council 7 Milan (Italy) TC 206 Fine ceramics 18 Rome (Italy) * TC 108/SC 4 Mechanical vibration, 22 Turin (Italy) * JTC 1/SC 29 Information technol- shock and condition ogy/Coding of audio, monitoring/Human picture, multimedia exposure to me- and hypermedia chanical vibration and information shock 24-28 Paris (France) * JTC 1/SC 35 Information technol- 18-20 London (United * TC 290 Online reputation ogy/User interfaces Kingdom) 26-27 Singapore * TC 281 Fine Bubble 19 Berlin (Germany) * DEVCO Committee on devel- (Singapore) Technology oping country matters August 2017 19 London (United * TC 41/SC 3 Pulleys and belts 7-11 Arlington (USA) * JTC 1/SC 24 Information technol- Kingdom) (including veebelts)/ ogy/Computer graph- Conveyor belts ics, image processing 19 Berlin (Germany) ** TMB Technical Manage- and environmental ment Board data representation 20 London (United * TC 41/SC 1 Pulleys and belts 14-15 London (United * JTC 1/SC 22 Information technol- Kingdom) (including veebelts)/ Kingdom) ogy/Programming Friction languages, their envi- ronments and system 20-21 Seoul (Korea, * TC 221 Geosynthetics software interfaces Republic of) 20-25 Hong Kong * TC 106 Dentistry 20-22 Berlin (Germany) ** GA General Assembly (Hong Kong, 20-22 (United ** TC 202 Microbeam analysis China) Kingdom) 24-25 Braunschweig * TC 172/SC 6 Optics and photonics/ 21 London (United * TC 41/SC 4 Pulleys and belts (Germany) Geodetic and survey- Kingdom) (including veebelts)/ ing instruments Synchronous belt 28 Virtual CSC/FIN Council/Council drives (Unknown) Standing Committee 21-22 Berlin (Germany) * TC 22/SC 31 Road vehicles/Data on Finance (CSC/FIN) communication September 2017 21-23 Tedding- * TC 201 Surface chemical 4-8 Berlin (Germany) * TC 21 Equipment for fire ton (United analysis protection and fire Kingdom) fighting 21-23 Tedding- * TC 201/SC 1 Surface chemical 6-8 Washington, D.C * TC 34/SC 16 Food products/Hori- ton (United analysis/Terminology (USA) zontal methods for Kingdom) molecular biomarker 21-23 Tedding- * TC 201/SC 2 Surface chemical analysis ton (United analysis/General 11-15 San Francisco * JTC 1/SC 38 Information technol- Kingdom) procedures (USA) ogy/Cloud Comput- 21-23 Tedding- * TC 201/SC 3 Surface chemi- ing and Distributed ton (United cal analysis/Data Platforms Kingdom) management and 11-15 Bologna (Italy) * TC 23/SC 6 Tractors and machin- treatment ery for agriculture and 21-23 Tedding- * TC 201/SC 4 Surface chemi- forestry/Equipment ton (United cal analysis/Depth for crop protection Kingdom) profiling 11-15 Gaithersburg * TC 108 Mechanical vibration, 21-23 Tedding- * TC 201/SC 6 Surface chemi- (USA) shock and condition ton (United cal analysis/Sec- monitoring Kingdom) ondary ion mass spectrometry 22 ISO Update, Supplement to ISO Focus -- February 2017 21-23 Tedding- * TC 201/SC 7 Surface chemical (Australia) ** TC 27/SC 1 Solid mineral fuels/ ton (United analysis/Electron Coal preparation: Kingdom) spectroscopies Terminology and performance 21-23 Tedding- * TC 201/SC 8 Surface chemical ton (United analysis/Glow dis- (Australia) ** TC 27/SC 3 Solid mineral fuels/ Kingdom) charge spectroscopy Coke 21-23 Tedding- * TC 201/SC 9 Surface chemical (Australia) ** TC 27/SC 4 Solid mineral fuels/ ton (United analysis/Scanning Sampling Kingdom) probe microscopy (Australia) ** TC 27/SC 5 Solid mineral fuels/ 21-23 Tedding- * TC 201/SC Surface chemical Methods of analysis ton (United 10 analysis/X-ray Reflec- Erlangen ** TC 36 Cinematography Kingdom) tometry (XRR) and (Germany) X-ray Fluorescence (XRF) Analysis Tel Aviv (Israel) ** TC 59/SC 17 Buildings and civil en- gineering works/Sus- 22 London (United * TC 41 Pulleys and belts tainability in buildings Kingdom) (including veebelts) and civil engineering 25-28 Penang * TC 157 Non-systemic con- works (Malaysia) traceptives and STI Sapporo (Japan) ** TC 71 Concrete, reinforced barrier prophylactics concrete and pre- 25-29 Buenos Aires * TC 8 Ships and marine stressed concrete (Argentina) technology (Europe) ** TC 146/SC 3 Air quality/Ambient 25-29 Copenhagen ** TC 58/SC 2 Gas cylinders/Cylin- atmospheres (Denmark) der fittings Vienna (Austria) ** TC 165 Timber structures 25-29 Beijing (China) * TC 79 Light metals and their Kuala Lumpur ** TC 267 Facility management alloys (Malaysia) 25-29 Beijing (China) ** TC 79/SC 5 Light metals and their 3rd Quarter 2017 alloys/Magnesium and alloys of cast or Santander ** TC 92/SC 1 Fire safety/Fire initia- wrought magnesium (Spain) tion and growth 25-29 Beijing (China) * TC 79/SC 6 Light metals and (Unknown) ** TC 190 Soil quality their alloys/Wrought (Unknown) ** TC 190/SC 1 Soil quality/Evaluation aluminium and alu- of criteria, terminol- minium alloys ogy and codification 25-29 Florence (Italy) * TC 146/SC 1 Air quality/Stationary (Unknown) ** TC 190/SC 3 Soil quality/Chemi- source emissions cal methods and soil 25-29 (Europe) ** TC 146/SC 6 Air quality/Indoor air characteristics 25-29 Tokyo (Japan) * TC 205 Building environment (Unknown) ** TC 190/SC 4 Soil quality/Biological design methods 25-29 Dresden * TC 232 Learning services Dublin (Ireland) ** TC 275 Sludge recovery, (Germany) outside formal recycling, treatment education and disposal 25-29 Stockholm * TC 300 Solid recovered fuels Beijing (China) ** TC 289 Brand evaluation (Sweden) October 2017 25-30 Tokyo (Japan) * TC 96 Cranes 2-7 Vladivostok * JTC 1 Information 26-28 London (United ** TC 17/SC 17 Steel/Steel wire rod (Russian technology Kingdom) and wire products Federation) 26-29 Berlin (Germany) * TC 256 Pigments, dyestuffs 5-6 Madrid (Spain) * TC 119 Powder metallurgy and extenders 8 New Orleans * TC 38 Textiles 27 Düsseldorf * TC 44/SC 13 Welding and allied (USA) (Germany) processes/Braz- 8-13 (India) ** TC 113 Hydrometry ing materials and processes 9-10 Xian (China) * TC 135/SC 9 Non-destructive test- ing/Acoustic emission 28 (Italy) ** TC 39/SC 4 Machine tools/Wood- testing working machines 9-13 New Delhi (India) ** TC 178 Lifts, escalators and 29 Virtual TC 20/SC 17 Aircraft and space moving walks (Unknown) vehicles/Airport infrastructure 10-13 Berlin (Germany) ** TC 153 Valves 29 Berlin (Germany) ** TC 254 Safety of amusement 11 New Orleans * TC 38/SC 1 Textiles/Tests for rides and amusement (USA) coloured textiles and devices colorants London (United ** JTC 1/SC 22 Information technol- 11 New Orleans * TC 38/SC 2 Textiles/Cleansing, Kingdom) ogy/Programming (USA) finishing and water languages, their envi- resistance tests ronments and system 11 Vienna (Austria) * TC 83/SC 4 Sports and other rec- software interfaces reational facilities and (Australia) ** TC 27 Solid mineral fuels equipment/Snows- ports equipment ISO Update, Supplement to ISO Focus -- February 2017 23 11 Winterthur * TC 131/SC 4 Fluid power systems/ 23-27 Tokyo (Japan) * TC 172/SC 1 Optics and photon- (Switzerland) Connectors and ics/Fundamental similar products and standards components 23-27 Tokyo (Japan) * TC 172/SC 3 Optics and photon- 11 Winterthur * TC 131/SC 6 Fluid power systems/ ics/Optical materials (Switzerland) Contamination control and components 11-12 (Japan) ** TC 67 Materials, equipment 23-27 Sydney TC 209 Cleanrooms and as- and offshore struc- (Australia) sociated controlled tures for petroleum, environments petrochemical and (Unknown) ** TC 28/SC 2 Petroleum and related natural gas industries products, fuels and 11-13 London (United * TC 59/SC 8 Buildings and civil lubricants from Kingdom) engineering works/ natural or synthetic Sealants sources/Measure- ment of petroleum 12 New Orleans * TC 38/SC 23 Textiles/Fibres and and related products (USA) yarns Achern ** TC 33 Refractories 12 New Orleans * TC 38/SC 24 Textiles/Condition- (Germany) (USA) ing atmospheres and physical tests for Pretoria (South ** TC 59/SC 2 Buildings and civil textile fabrics Africa) engineering works/ Terminology and 16 Seoul (Korea, * TC 194 Biological and clinical harmonization of Republic of) evaluation of medical languages devices Dallas (USA) ** TC 59/SC 13 Buildings and civil 16-20 Berlin (Germany) * TC 2 Fasteners engineering works/ 16-20 Berlin (Germany) * TC 2/SC 7 Fasteners/Reference Organization of standards information about 16-20 Berlin (Germany) * TC 2/SC 11 Fasteners/Fasteners construction works with metric external Pretoria (South ** TC 59/SC 15 Buildings and civil thread Africa) engineering works/ 16-20 Berlin (Germany) * TC 2/SC 12 Fasteners/Fasteners Framework for the with metric internal description of hous- thread ing performance 16-20 Berlin (Germany) * TC 2/SC 14 Fasteners/Surface Pretoria (South ** TC 59/SC 18 Buildings and civil en- coatings Africa) gineering works/Con- struction procurement 16-20 Tokyo (Japan) * TC 111 Round steel link chains, chain slings, Milan (Italy) ** TC 86/SC 7 Refrigeration and components and air-conditioning/Test- accessories ing and rating of com- mercial refrigerated 16-20 Tokyo (Japan) * TC 111/SC 1 Round steel link display cabinets chains, chain slings, components and ac- Xian (China) ** TC 244 Industrial furnaces cessories/Chains and and associated pro- chain slings cessing equipment 17-18 Qingdao (China) * TC 31/SC 9 Tyres, rims and October-November 2017 valves/Valves for tube 30-3 London (United * TC 98 Bases for design of and tubeless tyres Kingdom) structures 17-19 Hangzhou ** TC 264 Fireworks November 2017 (China) 4-10 San Antonio * TC 195 Building construc- 18-19 Hangzhou * TC 105 Steel wire ropes (USA) tion machinery and (China) equipment 20 Virtual President's President's 6 (United ** TC 215 Health informatics (Unknown) committee committee Kingdom) 20 Tokyo (Japan) * TC 111/SC 3 Round steel link 6-8 Berlin (Germany) * TC 172/SC 5 Optics and photon- chains, chain ics/Microscopes and slings, components endoscopes and accessories/ Components and 7-8 Marseille * TC 5/SC 2 Ferrous metal pipes accessories (France) and metallic fittings/ Cast iron pipes, fit- 23-25 Tokyo (Japan) * TC 172 Optics and photonics tings and their joints 23-26 Brussels ** TC 146/SC 2 Air quality/Workplace 7-11 Tokyo (Japan) * TC 272 Forensic sciences (Belgium) atmospheres 8-9 Berlin (Germany) * TC 70/SC 8 Internal combus- 23-26 Brussels ** TC 146/SC 4 Air quality/General tion engines/Ex- (Belgium) aspects haust gas emission 23-27 (China) ** TC 39/SC 2 Machine tools/Test measurement conditions for metal 8-10 Manila * TC 123 Plain bearings cutting machine tools (Philippines) 23-27 Hawaii (USA) TC 45 Rubber and rubber 10 Berlin (Germany) * TC 70 Internal combustion products engines 24 ISO Update, Supplement to ISO Focus -- February 2017 17 Berlin (Germany) * TC 107/SC 4 Metallic and other Edinburgh (Unit- ** TC 147 Water quality inorganic coatings/ ed Kingdom) Hot dip coatings June 2018 (galvanized, etc.) 4-5 (Japan) ** TC 299 Robotics 20 Geneva CSC/SPC Council/Strategy and (Switzerland) Policy Committee Daegu (Korea, ** JTC 1/SC 36 Information tech- (CSC/SPC) Republic of) nology/Information technology for learn- 21 Geneva CSC/FIN Council/Council ing, education and (Switzerland) Standing Committee training on Finance (CSC/FIN) (Norway) ** TC 292 Security and (India) ** TC 54 Essential oils resilience (Korea, Repub- ** TC 184/SC 4 Automation systems lic of) and integration/Indus- 2nd Quarter 2018 trial data (Korea, Repub- ** TC 6 Paper, board and lic of) pulps Bangkok ** TC 227 Springs (Thailand) (France) ** TC 126 Tobacco and tobacco products (Australia) ** TC 292 Security and resilience September 2018 (China) ** TC 309 Governance of 10-11 Toronto (Canada) * JTC 1/SC 22 Information technol- organizations ogy/Programming languages, their envi- December 2017 ronments and system 4-5 Stockholm * TC 159/SC 4 Ergonomics/Ergo- software interfaces (Sweden) nomics of human- 16-21 Stockholm * TC 164 Mechanical testing of system interaction (Sweden) metals 7-8 (Australia) ** TC 180 Solar energy 24 Geneva ** COUNCIL Council 7-8 (Australia) ** TC 180/SC 1 Solar energy/Climate (Switzerland) - Measurement and 26-28 Geneva ** GA General Assembly data (Switzerland) 8 Berlin (Germany) * TC 44/SC 6 Welding and allied Vienna (Austria) ** TC 5 Ferrous metal pipes processes/Resistance and metallic fittings welding and allied mechanical joining Philadelphia ** TC 28 Petroleum and related (USA) products, fuels and 14-15 Tokyo (Japan) * TC 159 Ergonomics lubricants from Foshan (China) ** TC 197 Hydrogen natural or synthetic technologies sources (Unknown) ** TC 291 Domestic gas cook- (Japan) ** TC 61 Plastics ing appliances (Mexico) ** TC 201 Surface chemical 4th Quarter 2017 analysis (China) ** TC 34/SC 4 Food products/Cere- 3rd Quarter 2018 als and pulses (Japan) ** JTC 1/SC 35 Information technol- (Unknown) ** TC 210 Quality management ogy/User interfaces and corresponding Tokyo (Japan) ** TC 17 Steel general aspects for medical devices Delft ** TC 92 Fire safety (Netherlands) Month unknown 2017 Delft ** TC 92/SC 2 Fire safety/Fire (China) ** TC 301 Energy management (Netherlands) containment and energy savings Delft ** TC 92/SC 3 Fire safety/Fire February 2018 (Netherlands) threat to people and 12 (Sweden) ** TC 58 Gas cylinders environment 12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera- Delft ** TC 92/SC 4 Fire safety/Fire safety tional requirements (Netherlands) engineering for gas cylinders Sao Paulo ** TC 135 Non-destructive March 2018 (Brazil) testing 22-23 Geneva ** COUNCIL Council October 2018 (Switzerland) 1-2 The Hague ** TC 209 Cleanrooms and as- 1st Quarter 2018 (Netherlands) sociated controlled environments (Netherlands) ** JTC 1/SC 35 Information technol- ogy/User interfaces Beijing (China) ** TC 59 Buildings and civil engineering works April 2018 (China) ** TC 59/SC 13 Buildings and civil (USA) ** TC 67/SC 7 Materials, equipment engineering works/ and offshore struc- Organization of tures for petroleum, information about petrochemical and construction works natural gas industries/ Offshore structures (Malaysia) ** TC 215 Health informatics Month unknown 2018 ISO Update, Supplement to ISO Focus -- February 2017 25 (Europe) ** JTC 1/SC 24 Information technol- ogy/Computer graph- ics, image processing and environmental data representation Zhuhai (China) ** JTC 1/SC 28 Information technol- ogy/Office equipment (Canada) ** TC 23/SC 6 Tractors and machin- ery for agriculture and forestry/Equipment for crop protection (Unknown) ** TC 34 Food products (China) ** TC 45 Rubber and rubber products (USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro- tective clothing (China) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/ Firefighters' personal equipment (China) ** TC 154 Processes, data elements and documents in com- merce, industry and administration Milan (Italy) ** TC 161 Controls and protec- tive devices for gas and/or oil Buenos Aires ** TC 228 Tourism and related (Argentina) services (France) ** TC 276 Biotechnology (Mexico) ** TC 301 Energy management and energy savings May 2019 20-24 (Japan) ** TC 121 Anaesthetic and res- piratory equipment June 2019 Beijing (China) ** JTC 1/SC 36 Information tech- nology/Information technology for learn- ing, education and training Month unknown 2019 (Asia) ** JTC 1/SC 24 Information technol- ogy/Computer graph- ics, image processing and environmental data representation Month unknown 2020 (North America) ** JTC 1/SC 24 Information technol- ogy/Computer graph- ics, image processing and environmental data representation 26 ISO Update, Supplement to ISO Focus -- February 2017