ISO 4016-2001 DIN en ISO 4016-2001_Hexagon Head Bolts

D EUTSCHE NORMMarch 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft – Produktklasse C (ISO 4016 : 1999) { EN ISO 4016 Supersedes DIN EN 24016, February 1992 edition. European Standard EN ISO 4016 : 2000 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been published in accordance with a decision taken by CEN/TC 185 to adopt, without alteration, International Standard ISO 4016 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Mechanische Verbindungselemente (Fasteners Standards Committee), Technical Committee Schrauben und Muttern mit Außenantrieb. The DIN Standards corresponding to the International Standards referred to in clause 2 and in the bibliography of the EN are as follows: ISO Standard ISO 225 ISO 724 ISO 898-1 ISO 3269 ISO 4018 ISO 4042 ISO/DIS 4759-1 ISO 8992 DIN Standard DIN EN 20225 DIN ISO 724 DIN EN ISO 898-1 DIN EN ISO 3269 DIN EN ISO 4018 DIN EN ISO 4042 DIN EN ISO 4759-1*) DIN ISO 8992 Amendments DIN EN 24016, February 1992 edition, has been superseded by the specifications of EN ISO 4016, which is identical to ISO 4016. *) Currently at draft stage. Continued overleaf. EN comprises 11 pages. © No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN EN ISO 4016 : 2001-03 English price group 09 Sales No. 1109 07.01 Page 2 DIN EN ISO 4016 : 2001-03 Previous editions Supplement to DIN 556: 1926-10. DIN 556: 1923-02. screws. 1963-03. 1936-07. screws and studs (ISO 898-1 : 1999) Fasteners – Acceptance inspection (ISO 3269 : 2000) Hexagon head screws – Product grade C (ISO 4018 : 1999) Fasteners – Electroplated coatings (ISO 4042 : 1999) ISO general purpose metric screw threads – Basic dimensions (ISO 724 : 1993) . 1967-12. studs and nuts – Symbols and designations for dimensioning (ISO 225 : 1983) Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts. Supplement 1 to DIN 601-1: 1942-11. DIN 601-1: 1941-01. National Annex NA Standards referred to (and not included in Normative references and Bibliography) DIN EN 20225 DIN EN ISO 898-1 DIN DIN DIN DIN EN ISO 3269 EN ISO 4018 EN ISO 4042 ISO 724 Bolts. 1984-06. 1925-04. 1934-07. DIN 601: 1925-07. 1951-09. 1936-04. 1970-11. DIN 602: 1925-07. DIN EN 24016: 1992-02. 1983-12. German). Germany. CEN members are the national standards bodies of Austria. Spain. Sweden.10 Supersedes EN 24016 : 1991. The European Standards exist in three official versions (English. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Italy. Denmark. Ireland. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. Finland. EN ISO 4016 : 2000 E . Portugal. English version Hexagon head bolts Product grade C (ISO 4016 : 1999) Vis à tête hexagonale partiellement filetées – Grade C (ISO 4016 : 1999) Sechskantschrauben mit Schaft – Produktklasse C (ISO 4016 : 1999) This European Standard was approved by CEN on 2000-10-26.060. Ref. France. Switzerland. Norway. the Czech Republic. Belgium. the Netherlands. French. Greece.EN ISO 4016 November 2000 ICS 21. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. and the United Kingdom. B-1050 Brussels © 2000. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Iceland. No. Luxembourg. and the United Kingdom. Iceland.Page 2 EN ISO 4016 : 2000 Foreword International Standard ISO 4016 : 1999 Hexagon head bolts – Product grade C. either by publication of an identical text or by endorsement. the Czech Republic. Spain. the Netherlands. Endorsement notice The text of the International Standard ISO 4016 : 1999 was approved by CEN as a European Standard without any modification. Ireland. Greece. Sweden. the national standards organizations of the following countries are bound to implement this European Standard: Austria. Germany. the Secretariat of which is held by DIN. Belgium. Norway. Switzerland. Luxembourg. In accordance with the CEN/CENELEC Internal Regulations. Italy. and conflicting national standards withdrawn. has been adopted by Technical Committee CEN/TC 185 ‘Threaded and non-threaded mechanical fasteners and accessories’. France. . Finland. This European Standard shall be given the status of a national standard. Portugal. as a European Standard. which was prepared by ISO/TC 2 ‘Fasteners’ of the International Organization for Standardization. Denmark. by May 2001 at the latest. Page 3 EN ISO 4016 : 2000 . Page 4 EN ISO 4016 : 2000 . Page 5 EN ISO 4016 : 2000 . Page 6 EN ISO 4016 : 2000 . Page 7 EN ISO 4016 : 2000 . Page 8 EN ISO 4016 : 2000 . Page 9 EN ISO 4016 : 2000 . Page 10 EN ISO 4016 : 2000 . Page 11 EN ISO 4016 : 2000 .