Malaysk Custom ROM for RK3066 andRK3188 Head Units. Installation Guide. If you like my ROM and you think that I did not waste a lot of my time for nothing, you can express your appreciation by simply saying “Thank you” Or sending PayPal donations to [email protected] Thank you. Malaysk. *To tell if the ROM is a FUSE or not, the FUSE file will have: update_4_4_4_FUSE_xxx---- in the beginning. Before you get started, be sure you can access to the recovery menu and able to navigate across the menu options. There are two types of installs. If your Head Unit (HU) has never had a Malaysk ‘FUSE’ type ROM or is completely stock from the factory you MUST do a ‘FIRST TIME INSTALLATION’. If you have already installed a Malaysk ‘FUSE’ type ROM and simply wish to update to a newer version you can do an ‘UPDATE’. There are two ways to do either an update or first time installation. Either will work but the ‘preferable’ is the easiest and best way to do it. *It is suggested to not update the MCU image file. MCU is the mapping of the functions of the HU. A different MCU image can change the mapping. If you do, make sure you can obtain your MCU image from somewhere. The file is not readily available in most cases 1|Page Extract the file on your computer into a folder location and remember the location. Format the MicroSD card under windows as FAT32. Copy the update.img to the MicroSD card. You can copy the instructions and other files, but, the update.img must be in the root of the MicroSD card. Remove your current GPS MicroSD card from you HU GPS slot and place it in a safe place. Insert the update.img MicroSD card into the HU GPS slot. 2|Page 6 mtc-launcer.8 mtc-music folder POST INSTALL CONFIGURATIONS 7. Click Here Screen Saver and Clock SETTINGS 6. Second method . Xposed 3|Page . Click Here 6. First time installation of custom Malaysk ROM over stock ROM Hus.Contents: FIRST TIME INSTALLATION 1. Second method. Updating previous versions of Malaysk ROM with FUSE. Updating previous versions of Malaysk ROM with FUSE Click Here ViPER4Android SETTINGS 5.ini 6. First method (preferable). Click Here 4. Preparing the GPS MicroSD card for Options. For Settings. First time installation Malaysk ROM over stock ROM HUs Click Here UPDATE INSTALLATION 3. Click Here 2.7 mtc-manager folder 6. First method (preferable). 1 Save update. Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 1.img file on GPS SD card.3 Malaysk ROM installation begins. When the ROM installation finishes.2 Go to Recovery mode menu and select third from the top option - Update system/mcu image from sdcard and clear all 1. First time installation Malaysk ROM on stock ROM HUs First method (preferable) 1. DO NOT WAIT till the boot completes (it will NOT ever completes any way) Go to recovery mode menu and select “Wipe all data/factory and cache reset” option 4|Page . the HU will start booting process. 1 Save update.2 Go to Settings menu. Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 2. (2) First time installation of Malaysk ROM on stock ROM HUs Second Method 2.3 Select “System Updates” 5|Page . select “About tablet” 2. move to very bottom of the menu.img file on GPS SD card. 6|Page . When the ROM installation finishes.2.4 Select “Wipe data from the flash” option and click “Install” 2.5 Your HU will reboot and Malaysk ROM installation begins. 7|Page . DO NOT WAIT till the boot completes (it will NOT ever complete anyway) Go to recovery mode menu and select “Wipe all data/factory and cache reset” option. the HU will start booting process. 3 Select “System Updates” 8|Page .1 Save update.img file on GPS SD card. move to very bottom of the menu.2 Go to Settings menu. select “About tablet” 3. Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 3. (3) Updating previous versions of Malaysk ROM with FUSE First method (preferable) You will not lose any apps/data or settings 3. 3.5 Your HU will reboot and Malaysk ROM installation begins. the HU will start boot process with updated Malaysk ROM. That’s it! 9|Page . When the ROM installation finishes.4 Press “Install” DO NOT check “Wipe data and format flash” 3. @comptechltd (Thank you) 10 | P a g e . Insert the SD card into GPS SD card slot BEFORE booting the HU up!! 4.2 Go to recovery menu.img file on GPS SD card. (4) Updating previous versions of Malaysk ROM with FUSE Second method. the HU will start boot process with updated Malaysk ROM. You will not lose any apps/data or settings 4. Translation from Russian .3 Malaysk ROM installation begins. Done Enjoy.1 Save update. When the ROM installation finishes. Select the second option from the top “Update system/mcu image from sdcard” 4. ViPER4Android Setup 5.2 Set Enable ON for FIREqualizer 11 | P a g e .1 Under headings of Phone Speaker Set Enable to ON under MASTER POWER and FIREQUALIZER 5. 3 DO NOT TURN ON SPEAKER OPTIMIZATION DISABLED 5.4 Under Select Effect Strength select Extreme 12 | P a g e .5. Select your preference 13 | P a g e .5 Under Select Preset.5. You will need to copy a file to your app storage area 6. mtc-launcher b.From MPH’. We will call this folder ‘Extract Folder’ for the purpose of these instructions.4 In the ‘Extract Folder’ you will find a folder called ‘Copy_TO_SD_External (GPS Card)’. 6. a. ‘Copy_TO_SD_External (GPS Card) -. Screen Saver and Clock Setup 6.3 Find your download (make sure you have the right one for your head unit) and extract the files into a folder on your computer. mtc-music 6. It is unlikely you will find any of these on your SD card if you are installing fresh from either a factory ROM or another non-Malaysk ROM.2 If any of the following files or folders are present.1 Setting the GPS MicroSD card from your HU Get your SD card from the GPS in your head unit. Inside this folder you will find 2 folders. 6. 14 | P a g e . delete them. and put it in your computer. mtc-manager c.From KM’ and ‘Copy_TO_SD_External (GPS Card) -. this is the time for you to make a choice. you will be copying the folders from inside ‘Copy_TO_SD_External (GPS Card) -.5 You are now ready to move to the next section. i.6 mtc-launcher folder mtc-launcer. mtc-launcher ii. mtc-music b.If you would like your display in MPH.ini a. The root of your SD card should now contain the following files/folders. mtc-launcher ii. When you navigate to the folder you choose (KM/MPH).6 # speed. (MPH) [main] speed=speed_gps radio_freq=fmfre # For MPH .divider=1. mtc-music 6. Or if you would like your display in KM/h.remove sign # before speed. a. inside that folder you will find 3 more folders. (KM) 15 | P a g e .6 b. Copy all 3 of these folders to the root of your GPS SD card 6. mtc-manager iii. the you will be copying the folders found inside the ‘‘Copy_TO_SD_External (GPS Card) – From KM’ folder.divider=1. mtc-manager iii.From MPH’. i. microntek.6 6. (MPH) (KM similar) settings.aura 16 | P a g e .screenclock # Name Activiti screensaver screenClass=MainActivity # If the name of the package and Activiti is not specified.6 # speed.avin com.7 mtc-manager folder a. when you specify false will work full-time mechanism: screenClock=true (set to false if you DO NOT WANT screensaver) # Time off the screen if you do not set out full-time settings will be used in sec: screenTimeout=200 (set to howmany seconds to display if screenClock=true) # The name of the screensaver program package screenPackage=com.microntek.remove sign # before speed. it will use a standard screensaver ss_exceptions.android.media com.browser com.divider=1. This will disallow screenSaver to display com.microntek.ini # the inclusion of an alternative screen saver.[main] speed=speed_gps radio_freq=fmfre # For MPH .divider=1.sygic.ini Example listed in exceptions ini. size=80 17 | P a g e . default false toast.picture.jpg # Rewind time in seconds assigned to the virtual buttons on the left and right of the time scale of file playback. to display in the player as the album and the projection on the background album_cover=cover. default 150 toast. toast=true toast.igo.navngo. Resolution (true or false) and font size.show=true # Size pictures in a popup message about the change of the track.javaclient 6.time=20 # Configure the pop-up messages on the track in the player if it is not active. On players KLD viewing function tag with album art will not work.com.size=24 # true to display pictures of the album in the pop-up message about the change of the track.picture. # Change the settings can only be after the = sign [music] # Name of the images from a folder with music.time=20 backpress.8 mtc-music folder (MPH and KM are alike) # Attention! This is the configuration file for the modified players JY and KGL.waze com. Forward and backward fwdpress. %title% # Desired level of transparency of the album cover on the projection of the general background of the player (in tenths of 1).picture. If empty. background_alpha= # Include standard control buttons media player control_keys=true # To activate experimental krakozyabrami conversion function set true encode=true [screenclock] color= 18 | P a g e . You can use the %title% %artist% %album% %filename% and %fullfilename%.color= # Display a pop-up notification duration: long (~ 4 seconds) or short (~ 2 seconds). the default short toast. You can combine and embed their characters and words.duration=short # Format pop-up message. the default will be the level of 0. put = 0.format=%artist% . To remove the projection.25.# Transparent image popup notification toast.alpha= # Color label pop-up message about the change of track toast. toast. close=true # Color information strings screensaver.# Color fields speed.color= # Color signatures: km / h. the default .color= # Color digital clock clock. true .of the phone appears on the background of the screen saver. true . = blue. h sub_title_color= # Turn off the screensaver only when you touch the screen. = green. or hex-code = #ffff0000 (see. touch_mode=true # Turn off the screen saver when an incoming call. if set. the default will be the color from the author. color= # Format screensaver date. If empty.color= # Color background rate numbers speed_back. false . will be your if empty. bluetooth. false - normal mode of operation.yes. Googl). You can write a = red. 2015) 19 | P a g e .yes. m.EEEE d MMMM yyyy (Tuesday February 2. background_color= # Transparency projection album cover in the screensaver (in fractions of 1).date_format= # The color and transparency of the background of the screen saver.75. Make black and not transparent as = #ff000000.6 20 | P a g e . By default. or any color. It lies on top of the background (transparent or black). To remove it completely.divider=1. cover_alpha=0. black with transparency 0. or so = black. put = 0.divider=1.6 #speed.remove sign # before speed.25 # For MPH . Press ‘Install/Update’. 2. 2.7 | POST INSTALL CONFIGURATIONS Install Xposed 1. Enter android settings. Select Modules 3. select ‘Framework’. Xposed Installer will launch. Choose modules to activate/de-activate 21 | P a g e . scroll to Xposed Framework. 3. Xposed will be installed and your head unit will reboot. To activate Xposed. enter the android settings and scroll to Xposed Framework. Select Xposed Modules 1.
Report "Instructions for Firmware the Device RK3066 and RK3188"