DRPage 1/6 Safety data sheet according to 1907/2006/EC, Article 31 Printing date 20.06.2011 * Version number 1 Revision: 20.06.2011 1 Identification of the substance/mixture and of the company/undertaking Product identifier Trade name: Blasocut® 4000 Strong Article number: 00872-41 Relevant identified uses of the substance or mixture and uses advised against Application of the substance / the preparation: For industrial use only Cooling lubricant / Cutting fluid Details of the supplier of the safety data sheet Manufacturer/Supplier: BLASER SWISSLUBE Pvt. Ltd. 1001, 10th Floor, Time Tower, Main MG Road, Sector 28, Gurgaon, Pin-122 002, India Tel.: +91 (0) 124-4994000 & +91 (0) 124-4994040 FAX: +91 (0) 124-4994020 Mailto: [email protected] Further information obtainable from: Product safety dept. [email protected][email protected] Emergency telephone number: ----- 2 Hazards identification Classification of the substance or mixture: Classification according to Regulation (EC) No 1272/2008 The product will be classified and labelled according to the CLP/GHS Regulation 1272/2008/EC on June 01, 2015. Hazardous substances listed in Section 3 have already been labelled in accordance with the CLP/GHS Regulation. The product is not classified according to the CLP regulation. Classification according to Directive 67/548/EEC or Directive 1999/45/EC Void Information concerning particular hazards for human and environment: The product does not have to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version. Classification system: The classification is according to the latest editions of the EU-lists, and extended by company and literature data. Label elements Labelling according to EU guidelines: Observe the general safety regulations when handling chemicals. The product is not subject to identification regulations under EU Directives and the Ordinance on Hazardous Materials (German GefStoffV). Special labelling of certain preparations: Contains D-limonene. May produce an allergic reaction. Safety data sheet available for professional user on request. Other hazards Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable. IN (Contd. on page 2) Information for doctor: Most important symptoms and effects. H319. C14-17) and inhibitors Declarable.06. 2. 5 Firefighting measures Extinguishing media Suitable extinguishing agents: CO2.2011 Trade name: Blasocut® 4000 Strong (Contd. Eye Irrit. Reference to other sections No dangerous substances are released. STOT SE 3. 6 Accidental release measures Personal precautions. consult doctor in case of complaints.DR Page 2/6 Safety data sheet according to 1907/2006/EC. EP additives (chlorinated paraffin.4% EINECS: 201-993-5 Xi R36/37/38. H335 Additional information: For the wording of the listed risk phrases refer to section 16. of page 1) 3 Composition/information on ingredients Chemical characterization: Mixtures Description: Mixture of mineral oils.0-2. sawdust). 2. Environmental precautions: Do not allow to enter sewers/ surface or ground water. universal binders. CAS: 107-41-5 2-Methyl-pentane-2. emulsifiers. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand. GHS07 Skin Irrit. protective equipment and emergency procedures Not required. After skin contact: Generally the product does not irritate the skin. N R50 GHS09 Aquatic Acute 1. After swallowing: If symptoms persist consult doctor.06. 2. H315. After eye contact: Rinse opened eye for several minutes under running water.4-diol 1. Indication of any immediate medical attention and special treatment needed No further relevant information available. diatomite. IN (Contd. See Section 8 for information on personal protection equipment. or hazardous components: CAS-no. Advice for firefighters Protective equipment: The use of SCBA is recommended. 4 First aid measures Description of first aid measures General information: No special measures required. See Section 7 for information on safe handling. 2. Article 31 Printing date 20. on page 3) .0-6. H319 CAS: 90-43-7 biphenyl-2-ol 1. H400.9% EINECS: 203-489-0 Xi R36/38 GHS07 Skin Irrit. Fight larger fires with water spray. H315. both acute and delayed No further relevant information available. Eye Irrit. After inhalation: Supply fresh air. acid binders. For safety reasons unsuitable extinguishing agents: Water with full jet Special hazards arising from the substance or mixture No further relevant information available.2011 Version number 1 Revision: 20. powder or water spray. See Section 13 for disposal information. Duration of storage: In closed. Specific end use(s) No further relevant information available.DR Page 3/6 Safety data sheet according to 1907/2006/EC.8 . Exposure controls Personal protective equipment: General protective and hygienic measures: The usual precautionary measures are to be adhered to when handling chemicals.g. Ultranitril type 491.06.and explosion protection: No special measures required. Information about fire . e.3 @ 50 g/l H₂O (DIN 51369) Change in condition Melting point/Melting range: Not applicable (Contd. of page 2) 7 Handling and storage Handling: Precautions for safe handling The product is not subject to identification regulations under EU Directives and the Ordinance on Hazardous Materials (German GefStoffV). 8 Exposure controls/personal protection Additional information about design of technical facilities: No further data. Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. Additional information: The lists valid during the making were used as basis. original container. see item 7.2011 Trade name: Blasocut® 4000 Strong (Contd. Conditions for safe storage. Protect from heat and direct sunlight. Observe the general safety regulations when handling chemicals. at least 24 months.2011 Version number 1 Revision: 20. Article 31 Printing date 20. Material of gloves Suitable protective gloves: Nitril gloves. Corresponds to the standards DIN/EN 374-2 and 374-3.3 mm. Body protection: Protective work clothing * 9 Physical and chemical properties Information on basic physical and chemical properties General Information Appearance: Form: Liquid Colour: Green Odour: Characteristic pH-value: 8.06. Store away from oxidizing agents. including any incompatibilities Storage: Requirements to be met by storerooms and receptacles: Store only in the original receptacle. Eye protection: Eye protector with side protection (framed eyeglasses) EN 166. Further information about storage conditions: Protect from frost. Respiratory protection: Not required. on page 4) IN .9. Control parameters Ingredients with limit values at the workplace: General indication value for refrigerating lubricants (without obligation): 10 mg/m3. minimum thickness of 0. Storage temperature between -70 °C and +40 °C. Information about storage in one common storage facility: Do not store together with oxidizing and acidic materials. Persistence and degradability No further relevant information available.DR Page 4/6 Safety data sheet according to 1907/2006/EC.06.06.2011 Version number 1 Revision: 20. Article 31 Printing date 20. 12 Ecological information Toxicity Acquatic toxicity: No further relevant information available. (ISO 3016) Flash point: Ignition temperature: > 130°C (ISO 2592) > 500°C (DIN 51794) Self-igniting: Product is not selfigniting. (Contd. 10 Stability and reactivity Reactivity Chemical stability Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. 1.98 g/cm³ (DIN 51757) Solubility in / Miscibility with water: Emulsifiable. Viscosity: Kinematic: Other information 56 mm²/s @ 40°C (ISO 3104) safety relevant data. Conditions to avoid No further relevant information available.2011 Trade name: Blasocut® 4000 Strong (Contd. Incompatible materials: No further relevant information available. on the eye: No irritating effect. Danger of explosion: Refractive index: Product does not present an explosion hazard. on page 5) IN .100 mg/m3 4h (inhalation. Sensitization: No sensitizing effects known.30°C. rat) > 5. the product does not have any harmful effects to our experience and the information provided to us. Hazardous decomposition products: Carbon monoxide and carbon dioxide Hydrogen chloride (HCl) Chlorine compounds Sulphur oxides (SOx) * 11 Toxicological information Information on toxicological effects Acute toxicity: LD/LC50 values relevant for classification: > 2000 . Possibility of hazardous reactions Reacts with strong acids and oxidizing agents.487 Density at 20°C: 0. Additional toxicological information: The product is not subject to classification according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version. which has to be considered as product specifications.< 5000 mg / kg (oral. When used and handled according to specifications. rat) Primary irritant effect: on the skin: No irritant effect. of page 3) Boiling point/Boiling range: > 300°C (DIN 51751) Pour point: <. Other adverse effects No further relevant information available.2011 Version number 1 Revision: 20.06. respectively by the end of 2018. * 16 Other information This information is based on our present knowledge. Danger to drinking water if even small quantities leak into the ground. or are exempt from the REACH regulation (e. then these numbers will be known and indicated only in section 3 within its tonnage band for registration. They may be recycled after thorough and proper cleaning. Empty contaminated packagings thoroughly. Recommended cleansing agents: Water. Article 31 Printing date 20. Uncleaned packaging: Recommendation: Disposal must be made according to official regulations. vPvB: Not applicable. Additional ecological information: General notes: Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water Do not allow product to reach ground water. 15 Regulatory information Safety. Regulations / approvals / listings: Information on REACH registration numbers in section 3: In case of lack of REACH registration numbers on mentioned hazardous substances at the end of 2010. However. water course or sewage system.g. on page 6) IN . of page 4) Behaviour in environmental systems: Bioaccumulative potential No further relevant information available. health and environmental regulations/legislation specific for the substance or mixture National regulations: none Chemical safety assessment: A Chemical Safety Assessment has not been carried out.06.2011 Trade name: Blasocut® 4000 Strong (Contd. * 13 Disposal considerations Waste treatment methods Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system. if necessary together with cleansing agents. after the end of 2013. this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. (Contd. Mobility in soil No further relevant information available. Transport/Additional information: Not dangerous according to the above specifications. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable. 14 Transport information Land transport ADR/RID (cross-border) ADR/RID class: Maritime transport IMDG: IMDG Class: Marine pollutant: No Air transport ICAO-TI and IATA-DGR: ICAO/IATA Class: UN "Model Regulation": Special precautions for user Not applicable. Results of PBT and vPvB assessment PBT: Not applicable.DR Page 5/6 Safety data sheet according to 1907/2006/EC. Article 31 Printing date 20. Department issuing MSDS: Product Safety Department Editor's notice: The above mentioned data correspond to our present state of knowledge and experience. The content of polycyclic aromatic hydrocarbons (PCA) according to IP346 is <3% (DMSO-extract). 50 percent SVHC: Substance of Very High Concern (REACH) * Data compared to the previous version altered. cadmium or it's compounds. IP346: The contained refined mineral oils are exempt of labelling. silicones. WEEE 2002/96/EC. PCT. The following substances ARE NOT contained: Pentabromodiphenylether. PCP (pentachlorophenol). formaldehyde.06. 50 percent LD50: Lethal dose. The product does not contain: Nitrite. 2003/11/EC. Abbreviations and acronyms: RoHS: Restriction of Hazardous Substances ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the International Transport of Dangerous Goods by Rail) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association IATA-DGR: Dangerous Goods Regulations by the "International Air Transport Association" (IATA) ICAO: International Civil Aviation Organization ICAO-TI: Technical Instructions by the "International Civil Aviation Organization" (ICAO) GHS: Globally Harmonized System of Classification and Labelling of Chemicals VOC: Volatile Organic Compounds (USA. IN . polybrominated diphenylether (PDBE) and / or polybrominated biphenyls (PBB). The asterisk (*) on the left side indicate the respective changes from the previous version. 2005/53/EC and RoHS. The indications have not the meaning of guarantees on properties. mercury or it's compounds. respiratory system and skin. H400 Very toxic to aquatic life. nitrite separators. H319 Causes serious eye irritation.DR Page 6/6 Safety data sheet according to 1907/2006/EC. active sulphur. chromium-6 + compounds. TCDD or other dioxin-containing substances. NDELA and/or nitrosamines. The safety data sheet serves as description of the products in regard to necessary safety measures. of page 5) polymers). H335 May cause respiratory irritation. R36/38 Irritating to eyes and skin.06. PCB.2011 Version number 1 Revision: 20. R50 Very toxic to aquatic organisms. Relevant phrases H315 Causes skin irritation.2011 Trade name: Blasocut® 4000 Strong (Contd. formaldehyde separators. lead or it's compounds. RoHS: The product is compliant with European Directives 2002/95/EC. diethanolamine. Octabromodiphenylether. secondary amines. R36/37/38 Irritating to eyes. triazine (HHT). EU) ISO: International Organization for Standardization LC50: Lethal concentration.