HiPath 2000 HiPath 3000 HiPath 5000Software Manager User Manual SWMTOC.fm For internal distribution only Contents Contents 1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Structure of this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.1 Typographical Conventions and Symbols Used . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting to Know the Software Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 The portal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2.1 Logging on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2.2 Logging off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 The interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.1 Navigation area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.2 Work area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.3 Action menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.4 Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.5 Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Requesting System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Updating system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Selecting Overviews for a Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1 HG1500 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.2 HiPath 3000 ComScendo Service overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.3 Overview of the HiPath 5000 LAN Device Handler . . . . . . . . . . . . . . . . . . . . . . . . 3.2.4 Overview of the HiPath 5000 ComScendo Service. . . . . . . . . . . . . . . . . . . . . . . . 3.2.5 Overview of the HiPath 2000 ComScendo Service. . . . . . . . . . . . . . . . . . . . . . . . 4 Upgrading System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Selecting overviews for the upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1 Upgrading HiPath 3000 ComScendo Service and HG1500 . . . . . . . . . . . . . . . . . 4.1.2 Upgrade HG1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.3 Upgrade HiPath 3000 ComScendo Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.4 Upgrade HiPath 2000 ComScendo Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Upgrading components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 1-1 1-1 1-5 1-5 1-5 2-1 2-1 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-8 3-1 3-1 3-2 3-3 3-3 3-3 3-3 3-3 4-1 4-1 4-3 4-3 4-3 4-3 4-4 A31003-H3570-U101-1-7619, 2007-03-20 Software Manager, User Manual 0-1 SWMTOC.fm Contents For internal distribution only 5 Backup of System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Directory structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 Backup files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Selecting overviews for the backup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1 Complete backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2 Backup HG 1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.3 Backup HiPath 3000 ComScendo Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.4 Backup HiPath 5000 LAN Device Handler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.5 Backup HiPath 5000 ComScendo Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.6 Backup HiPath 2000 ComScendo Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.7 Database backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Backup components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 Performing SQL restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 General settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 Backup settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Upgrade settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4 HG1500 settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 5-1 5-2 5-3 5-5 5-6 5-6 5-6 5-7 5-7 5-7 5-8 5-9 6-1 6-1 6-2 6-4 6-5 A Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 A.1 Software Manager Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 A.2 Bypassing the Proxy Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 List of Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y-1 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z-1 0-2 A31003-H3570-U101-1-7619, 2007-03-20 Software Manager, User Manual SWM_C01.fm For internal distribution only General Information Introduction 1 1.1 General Information Introduction Software Manager can be implemented for the communication systems HiPath 2000, HiPath 3000 and HiPath 5000. It allows you to perform the following tasks: ● ● ● Display system software versions Update system software Create system software backups With the Software Manager you can quickly and efficiently analyze all the main HiPath components with a Web browser. In addition, you can determine which components are assigned to which individual HiPath nodes. And you can invoke additional serviceability web services such as the Inventory Manager from the portal page. With Inventory Manager, you can quickly obtain a complete overview of all integrated components and installed applications in the HiPath network. A31003-H3570-U101-1-7619, 2007-03-20 Software Manager, User Manual 1-1 SWM_C01. 1-2 A31003-H3570-U101-1-7619.fm General Information Introduction For internal distribution only The following example provides an overview of how a HiPath network operates. User Manual . 2007-03-20 Software Manager. 2007-03-20 Software Manager. User Manual 1-3 .fm For internal distribution only General Information Introduction The Software Manager enables you to identify and update the system software of the various components within this system. A31003-H3570-U101-1-7619.SWM_C01. 1-4 A31003-H3570-U101-1-7619. 2007-03-20 Software Manager.fm General Information Introduction For internal distribution only An additional Software Manager property is its ability to create central backups.SWM_C01. The following diagram displays how this feature works. User Manual . Files or directories appear in Courier font. .SWM_C01.1 Structure of this Manual Typographical Conventions and Symbols Used Buttons and menus are shown in bold type. This symbol indicates warnings that must be observed.0 or later) Administrator Documentation A31003-H3570-U101-1-7619. .. User Manual 1-5 .2..2 1..cfg. file global. appear in angle brackets.0 or later) Service Documentation HiPath Manager E Administrator Documentation HG 1500 Web Based Management (version 3.3 This symbol indicates notes or recommendations. which can vary depending on the situation at hand.0 or later) Service Documentation HiPath 3000/5000 (version 5.. refer to the following documents: ● ● ● ● HiPath 2000 (version 1.fm For internal distribution only General Information Structure of this Manual 1. Entries or information.. <Wildcard> > 7 1.. 2007-03-20 Software Manager... Further Information For further information. the OK button . fm General Information Further Information For internal distribution only 1-6 A31003-H3570-U101-1-7619.SWM_C01. User Manual . 2007-03-20 Software Manager. you can quickly obtain a complete overview of all integrated components and installed applications in the HiPath network.2 The visibility of additional serviceability web services on the portal page depends on whether they have been registered with the portal. Login The Software Manager runs automatically once the server has been started up and remains active in the background. User Manual 2-1 . A31003-H3570-U101-1-7619. > 2. 2. The link to the portal page has the following general structure: <protocol>://{<host name>|<IP address>}:<port number> For example: http://pdbh834a:8280" or "https://pdbh834a:8443" From this page you can access the following serviceability web services for the HiPath network: ● Inventory Manager With the Inventory Manager. 2007-03-20 Software Manager. Use the Portal icon in the toolbar to do this.SWM_C02. the Login dialog appears. As soon as the Software Manager is accessed with the browser.fm For internal distribution only Getting to Know the Software Manager The portal 2 Getting to Know the Software Manager In this chapter you will learn how to log onto and off from the Software Manager and become familiar with the Software Manager interface.1 The portal After installation. The ideal Software Manager display can be achieved by setting the screen resolution to 1024x768 pixels or higher. Software Manager ● The portal page can also be reached from the programs listed there. the Common Web Service stores a desktop icon for starting the portal page on the server. 2-2 A31003-H3570-U101-1-7619. User Manual . If there are problems with the HTTPS connection. 1. see section A. For security reasons. all data transferred is now encrypted. > If the connection has been established via HTTP (port 8280). you can change usernames and passwords. Enter your username and password in the respective fields. > User names and passwords are centrally administered for the entire system by HiPath Manager E. you can establish a connection via the HTTPS protocol (port 8443) by using the Authentication via SSL link. however.1 Logging on The link to the Software Manager can be called up via the portal page. The password entered is hidden by asterisks. You can log into the system by entering the username and password which have been assigned to your HiPath system. Cookies and JavaScript must be enabled in your browser settings for the pages to display correctly. This data entered is then verified via the DB Feature Server.2. 2007-03-20 Software Manager. With the help of this program. the HTTPS connection should be the preferred connection to the server. For more information on the assignment of usernames and passwords.fm Getting to Know the Software Manager Login For internal distribution only 2.2. If a proxy server is being used and you need to bypass it.SWM_C02. use HTTP access instead. please refer to the HiPath Manager E documentation. “Bypassing the Proxy Server”. Unlike HTTP. for example. The Reset button undoes the last changes made. A31003-H3570-U101-1-7619. follow the instructions in the error message.fm For internal distribution only Getting to Know the Software Manager Login 2. > After 30 minutes of no activity. Click the Login button. select Log off in the navigation area and click the Log off now button. you must log in again.2. Please check the status of the last backup”. The data is updated and the Software Manager is activated.1. Logging off To end the Software Manager. If you wish to continue working with the Software Manager. > If error messages such as "Incorrect user name and/or password" are displayed after you have logged in. Once you have successfully logged in. “Logging on”). > 2.SWM_C02.2 If error messages are displayed on the screen after successfully logging in. If you want to perform further actions with the Software Manager. Press OK to confirm it. “There are defective backups. 2007-03-20 Software Manager. you will see a message showing when the system information was last updated. the connection between the browser and the system is automatically disconnected. follow the instructions in the error message. User Manual 2-3 .2. you must log in again (see section 2. User Manual . 2-4 A31003-H3570-U101-1-7619.1). 2007-03-20 Software Manager.SWM_C02.01 or later or Firefox 1.fm Getting to Know the Software Manager The interface For internal distribution only 2. This means that the Software Manager is platform-independent and can run on all current operating systems.0.3 The interface Navigation area Work area Toolbar Action menu Status bar The Software Manager interface consists of HTML pages. which can be opened with an HTML browser (Internet Explorer V5. Click one of the submenu items to display the relevant page in the work area. a small plus icon is displayed in front of the menu item. Navigation area The navigation area contains the various Software Manager menu items. the submenus are displayed and the plus icon is replaced by a minus icon.1 If the work area and action menu cannot be fully displayed due to the size of the browser window.SWM_C02. User Manual 2-5 . When you click on the plus icon. the corresponding page appears in the work area. The menu items are dynamic.fm For internal distribution only Getting to Know the Software Manager The interface Each HTML page basically consists of five areas: ● ● ● ● ● Navigation area Work area Action menu Toolbar Status bar > 2. This means that the number of menu items displayed may change depending on the scenario. If a menu item contains submenus. A31003-H3570-U101-1-7619.3. If you click a menu item. 2007-03-20 Software Manager. horizontal or vertical scroll bars appear at the edges and you can use them to scroll the section displayed. Click the minus icon to hide the submenus again. The current sort sequence is displayed in the column header: – – (A>Z): Alphabetically ascending (Z>A): Alphabetically descending Some columns cannot be used as sort keys (for example Upgrade status). Individual components can be selected with the help of the control boxes and drop-down lists.fm Getting to Know the Software Manager The interface For internal distribution only 2. User Manual . Display The tables are displayed in the work area. 2007-03-20 Software Manager. The following figure shows an example of this.3.SWM_C02. The individual table columns depend on the selected overview. scroll bars appear at the right and/or bottom edge of the table. 2-6 A31003-H3570-U101-1-7619.2 Work area The work area displays overviews of the various HiPath system components in your HiPath network. Sort key You can sort the table columns in ascending or descending order by clicking a column header. The individual system components are displayed in tabular format. If the table cannot be fully displayed due to its size. You can activate/deactivate all table entries with the Select all checkbox. A31003-H3570-U101-1-7619. User Manual 2-7 . If there is more than one option to choose from. 2007-03-20 Software Manager. a drop-down list will appear in the table.3 Action menu You can perform various actions in the action menu.SWM_C02.3. Click the arrow next to the selection window and select the desired option. You can find descriptions of the individual buttons under the respective menu items. The number and choice of buttons displayed depends on what was selected in the navigation area.fm For internal distribution only Getting to Know the Software Manager The interface Marker Information displaying the status of the individual components is represented by colors with the following meanings: Marker Red Yellow Green Empty field Select To select a component. place a checkmark in the Select column. Status Error/unreachable (Fault) Busy/progress in % OK No activity (Idle) 2. 2007-03-20 Software Manager. 2. “The portal”).4 Toolbar In the Software Manager toolbar you will find buttons with which you can open the help menu and the start page regardless of the selected menu. 2-8 A31003-H3570-U101-1-7619. Time and date of the last system data update.fm Getting to Know the Software Manager The interface For internal distribution only 2.3.SWM_C02. Opens the Software Manager homepage. The individual toolbar buttons and their meanings: Opens the online help.5 Status bar The following information is shown in the status bar: ● ● ● Copyright. Software Manager version and product number. User Manual . Opens the portal page (see also section 2.1.3. 2007-03-20 Software Manager. Depending on the size of the whole system. > 3.2. A31003-H3570-U101-1-7619. the date and time of the last update are displayed in the status bar. we recommend that you manually trigger a system information request as automatic updates are performed every 24 hours. The date and time of the last update are displayed. Click Update data. You can also trigger the request manually (see section 3. the update may take a few minutes. an information window containing the date and time of the last system request appears on the Inventory Manager after login (see section 2. This starts the system information update. If changes have been made to the HiPath network or its components before the Software Manager is activated.fm For internal distribution only Requesting System Information Updating system information 3 Requesting System Information The Inventory Manager provides the Software Manager with the number of systems and the system information to be included.1. 7 If a node cannot be accessed via SNMP. Always wait until the update is complete before performing other actions.1 1. As soon as the update is complete. the Inventory Server cannot properly detect the embedded boards of this node. Updating system information Click Update system information. “Login”). As soon as the browser is used to access the Software Manager. 2. “Updating system information”). This request is made automatically every 24 hours. This ensures that your actions are always performed with the most up-to-date data.SWM_C03. User Manual 3-1 . Meaning Indicates the node number. The selected overview determines which columns are displayed in a table. location).2 Selecting Overviews for a Request You can access the following overviews for the various components: ● ● ● ● ● HG1500 overview HiPath 3000 ComScendo Service overview Overview of the HiPath 5000 LAN Device Handler Overview of the HiPath 5000 ComScendo Service Overview of the HiPath 2000 ComScendo Service The overviews are displayed in tabular form. 3-2 A31003-H3570-U101-1-7619.fm Requesting System Information Selecting Overviews for a Request For internal distribution only 3. User Manual . Indicates the software version currently installed on the system. Specifies the name of the board and additional information (version. The overview columns have the following meanings: Column Node Component IP address Software version Last restart – – <Date> <Time> Indicates the date of the last restart. Indicates the time of the last restart. 2007-03-20 Software Manager. Indicates the IP address of the component.SWM_C03. User Manual 3-3 .4 Overview of the HiPath 5000 ComScendo Service This information refers to all HiPath 5000 systems that are integrated in the HiPath network.3 Overview of the HiPath 5000 LAN Device Handler This information refers to LAN device handlers that are integrated in the HiPath network in conjunction with a HiPath 5000 system.2.SWM_C03. 3. 3. 3.2. 3.1 HG1500 overview This information refers to HG 1500 boards that are integrated in the HiPath network in conjunction with a HiPath 3000 system.fm For internal distribution only Requesting System Information Selecting Overviews for a Request 3. 2007-03-20 Software Manager.2.5 Overview of the HiPath 2000 ComScendo Service This information refers to all HiPath 2000 systems that are integrated in the HiPath network.2.2 HiPath 3000 ComScendo Service overview This information refers to all HiPath 3000 systems that are integrated in the HiPath network.2. A31003-H3570-U101-1-7619. fm Requesting System Information Selecting Overviews for a Request For internal distribution only 3-4 A31003-H3570-U101-1-7619. 2007-03-20 Software Manager.SWM_C03. User Manual . (current) shdw. Software version installed in the "shadow memory".SWM_C04.fm For internal distribution only Upgrading System Components Selecting overviews for the upgrade 4 Upgrading System Components The Software Manager enables you to upgrade the system software of the individual components centrally from any PC in the HiPath network. From various menu items in the navigation area. 2007-03-20 Software Manager. (shadowed) avail. The selected overview determines which columns are displayed in a table. Software available on the TFTP server.1 Selecting overviews for the upgrade You can choose from the following overviews for upgrading the individual components: ● ● ● ● Upgrading HiPath 3000 ComScendo Service and HG1500 Upgrade HG1500 Upgrade HiPath 3000 ComScendo Service Upgrade HiPath 2000 ComScendo Service The overviews are displayed in tabular form. User Manual 4-1 . Indicates the node number. location). Last restart A31003-H3570-U101-1-7619. Indicates the IP address of the board. Indicates the date of the last restart. Meaning The checkbox for selecting the components. (available) <Date> <Time> Software version currently installed on the system. 4. you can choose the system groups for which you wish to upgrade the system software. Indicates the time of the last restart. Specifies the name of the board and additional information (version. The overview columns have the following meanings: Column Select Node Component IP address Software version – – – – – curr. User Manual . 2007-03-20 Software Manager. Indicates the status in percent for a software transfer. An error occurred while performing an action. Indicates the preselected time for switchover. Indicates that the system is not available. Timeout or Board cannot be found) occurred while detecting the status. The following status messages are displayed in the Upgrade status column: Message Empty field Loading software Error Not available Meaning The component is currently idle and is not performing any actions. No switchover is possible because. An error (for example. there is no valid APS installed in the shadow memory. Indicates whether the system is in idle state.SWM_C04. Indicates the current status of the upgrade. Upgrade status The following status messages are displayed in the Switchover time/status column: Message Ready to switch over Switchover not possible Timed switchover Not available Meaning A valid APS to which the system can be switched is loaded in the shadow memory. for example.fm Upgrading System Components Selecting overviews for the upgrade For internal distribution only Column Switchover time/status – – – – – – <Date> <Time> <Status> Empty field Percentage <not available> Meaning Indicates the preselected date for switchover. so that the status cannot be determined. Timeout) occurred while detecting the system status. The component is currently loading new software to the shadow area. An error (for example. There is a valid APS installed in the shadow memory and switchover at a preselected time is enabled. 4-2 A31003-H3570-U101-1-7619. “Upgrading components”. 4.4 Upgrade HiPath 2000 ComScendo Service Click this menu item to display an overview of all HiPath 2000 ComScendo Services.fm For internal distribution only Upgrading System Components Selecting overviews for the upgrade 4.2 Upgrade HG1500 If you click this menu item.2. The HiPath 2000 ComScendo Service and its two software images (operating system and applications) are updated.0 or later (earlier HG 1500 boards cannot be updated with Software Manager) are displayed in an overview. “Upgrading components”.1. “Upgrading components”. proceed as described in section 4. all HG 1500 boards with version 3. User Manual 4-3 . To update this selection. proceed as described in section 4.3 Upgrade HiPath 3000 ComScendo Service Click this menu item to display an overview of all HiPath 3000 ComScendo Services.1.1.1.2.2. A31003-H3570-U101-1-7619.2. 4. To update this selection. 2007-03-20 Software Manager. To update this selection.1 Upgrading HiPath 3000 ComScendo Service and HG1500 Click this menu item to display an overview of all ● ● HiPath 3000 ComScendo Services and HG 1500 boards with version 3. proceed as described in section 4. “Upgrading components”. 4.0 or later (earlier HG 1500 boards cannot be updated with Software Manager).SWM_C04. proceed as described in section 4. To update this selection. “Upgrade settings”). and as soon as the upload is complete the system becomes active with the new software. Select the components either individually in the Select column or select all itemized components with the Select all checkbox in the action menu. If there are different software versions available. In the first step. select one of the menu items described below. they are displayed in a drop-down list and can be selected as required. 3. An input field appears in which you can set the date and time of the switchover. The system is then automatically reset and the new software is started up.3. the new software version is loaded to a system memory known as the "shadow memory" while the current software is still running in the actual process. Drop-down List Only load software Meaning The selected software version is uploaded to the shadow memory. The switchover time is automatically reset for deactivated components. Enter the desired date and time for the switchover in the input field and confirm the entries with the "Set switchover time" button. Load software and switch over The selected software version is uploaded to the shadow later memory and the system is switched over at a preset time. The software is uploaded in the background. Load software and switch over The selected software version is uploaded to the shadow immediately memory. When the input field first appears. Before you can select these software versions. > All components of a node are always selected by default. you must first save them on the TFTP server of your HiPath system (see section 6. The software is upgraded in two steps. 2007-03-20 Software Manager. User Manual . 4-4 A31003-H3570-U101-1-7619. independently of the system status. 2.SWM_C04. select the desired software for the respective components. Where possible. Upgrading components Select one of the overviews. Simply uncheck the corresponding checkbox for components you do not want to update.2 1.fm Upgrading System Components Upgrading components For internal distribution only 4. The newest software version is usually displayed first in the drop-down list. From the drop-down list. the system must be switched over in order to activate the new software. 4. it displays the current date and time. the current software is replaced by the new software in the shadow memory. First. In the second step. which must be installed in the Shadow memory beforehand. it is deleted and Software Manager continues the upgrade. the switchover time will be reset. Immediately deletes the content of the shadow memory (only possible with HiPath 3000 ComScendo). Allows you to enter a time at which the system will be switched over to the software installed in the shadow memory. If the shadow memory is not empty. the switchover time will be reset. 2007-03-20 Software Manager.fm For internal distribution only Upgrading System Components Upgrading components Drop-down List Switch over now Meaning This immediately starts the software switchover. The selected action is carried out. Click the OK button. ● If you selected a HiPath 3000 ComScendo service without its associated HG 1500 components: – The specified switchover time will be set for the HiPath 3000 ComScendo service. User Manual 4-5 . This command deletes the specifications of a timed switchover. – For all other HG 1500 components that belong to the node but were not selected. Deactivates the switchover time that you can set under Set switchover time. The following conditions apply if you set the switchover time in the "Upgrading HiPath 3000 ComScendo Service and HG1500" menu: ● If you selected a HiPath 3000 ComScendo service and its associated HG 1500 components: – The specified switchover time will be set for all selected HG 1500 components. – The specified switchover time + 10 minutes will be set for the HiPath 3000 ComScendo Service. Set switchover time Deactivate switchover time Delete shadow > 5. – For all other HG 1500 components that belong to the node.SWM_C04. A31003-H3570-U101-1-7619. Software Manager checks the status of the shadow memory before every upgrade. The new software version is displayed once the upgrade is complete. “General settings”). “Updating system information”). the current status of the upgrade is displayed as a percentage. click Update data in the System information . the current upgrade status is displayed in percent.SWM_C04.fm Upgrading System Components Upgrading components For internal distribution only Cyclical option If the Cyclical option is activated. You can specify the interval in the “Settings” menu under “General settings” (see section 6.1. 2007-03-20 Software Manager. 4-6 A31003-H3570-U101-1-7619. During an upgrade. the displayed HTML page is auto-reloaded after a specified refresh interval. it is reassigned the system information from the Inventory Manager.Update system information menu item (see section 3. > When you exit this HTML page after upgrading. While an upgrade is in progress. Refresh button You can manually reload the HTML page displayed by clicking the Refresh button. User Manual .1. To update the current software version in the system information. 1 Directory structure The backup data is saved under the path that is specified during setup. ● ● ● ● ● ● A31003-H3570-U101-1-7619. “Backup settings”). H3000CS Backup data for the HiPath 3000 ComScendo Service. H2000CS Backup data for the HiPath 2000 ComScendo Service. HG1500 Backup data for HG 1500 boards.fm For internal distribution only Backup of System Components Directory structure 5 Backup of System Components The Software Manager enables you to centrally backup all system data as well as various databases. H5000LDH Backup data for the HiPath 5000 LAN Device Handler. 2007-03-20 Software Manager. H5000CS Backup data for the HiPath 5000 ComScendo Service. You can backup the following data types: ● ● ● ● ● ● ● System data of all HiPath 2000 ComScendo services (including customer data memory) System data of all HiPath 3000 ComScendo services (including customer data memory) System data of all HiPath 5000 ComScendo services (including customer data memory) System data of all HiPath 5000 LAN device handlers System data of all HG 1500s Databases (SQL Server) DB Feature Server 5. This can be subsequently changed in the Settings menu (see section 6. The following subdirectories are created for the individual components in this path: ● Applications Not yet in use. DBFS Backup data for the DB Feature Server.SWM_C05. User Manual 5-1 .2. 46 hours and 32 seconds by the component system1 with the IP address 123. the backup data is sorted and stored according to the system name and IP address. MSDE Backup data for the Microsoft Database Engine (SQL Server). HiPath 3000 ComScendo Service.fm Backup of System Components Backup files For internal distribution only ● logs Contains XML files holding summaries of complete backup runs (for example : log_autobackup_05212002_235900.4_system1.13. User Manual .kds You can either manually run the backup straight away or specify a time for a complete backup (Autobackup) of all components.SWM_C05. 5-2 A31003-H3570-U101-1-7619. 5. They are formatted as follows: <IP ADDRESS>_<SYSTEM NAME> (for example. 2007-03-20 Software Manager. For further information on this. please refer to section 3. 124. This data can be restored with the respective component administration programs. The subdirectory names consist of the component IP address and the system name. ● Backup data sub-directories For components which may occur multiple times.2. 2002 at 15. “Backup settings”).xml).1.252. > Always request system information before you initiate a backup.13. is stored with the following name: 05142002_154632_123. HiPath 5000 ComScendo Service and HG 1500.4.14.2 Backup files The corresponding backup files are structured in the following way: <MMDDYYYY>_ <HHMMSS>_ <IPADDRESS>_ <SYSTEMNAME>_ <ORGINALFILENAME> Date Time IP address System name Original file name Example: The backup file which was created on May 14.252. “Updating system information”. You can change the default settings for automatic backup in the Settings menu (see section 6. such as HiPath 2000 ComScendo Service.3_system1). when your data is to be saved.345. SWM_C05. Indicates the status of the last activated backup or provides information on the progress of the current backup. Backup status A31003-H3570-U101-1-7619.fm For internal distribution only Backup of System Components Selecting overviews for the backup 5. Indicates the node number. location). Indicates the IP address of the board. Indicates the time of the last activated backup. Meaning The checkbox for selecting the components. The selected overview determines which columns are displayed in a table. User Manual 5-3 .3 Selecting overviews for the backup You can choose from the following overviews for backing up the individual components: ● ● ● ● ● ● ● Complete backup Backup HG 1500 Backup HiPath 3000 ComScendo Service Backup HiPath 5000 LAN Device Handler Backup HiPath 5000 ComScendo Service Backup HiPath 2000 ComScendo Service Database backup The overviews are displayed in tabular form. Specifies the name of the board and additional information (version. The overview columns have the following meanings: Column Select Node Component IP address Last backup – – <Date> <Time> Indicates the date of the last activated backup. 2007-03-20 Software Manager. Indicates that the last component backup was initiated manually from the complete backup. Indicates that the last component backup was initiated manually from the selection list. because no backup has yet been performed). manually Unknown Meaning Indicates that the last backup was performed due to a cyclic automatic backup. Indicates that errors were detected during the last backup process for this component.SWM_C05. Indicates that the type of backup could not be identified (for example. User Manual . manually Complete. 2007-03-20 Software Manager.fm Backup of System Components Selecting overviews for the backup For internal distribution only The following messages can appear in the first line of the Backup Status column: Message Not available Meaning Indicates that the backup status of a component has not yet been identified (message usually appears directly after installation). Indicates that a component backup procedure is currently running. Indicates that the backup process of the last backup was performed successfully and without errors. Indicates that the type of backup could not be identified (this is usually caused by a serious error). 5-4 A31003-H3570-U101-1-7619. because no backup has yet been performed). Indicates that the backup of a component has been actively initiated. Planned Active Last backup OK Faulty Unknown - The following messages can appear in the second line of the Backup Status column: Message Automatic Single. but the procedure has not yet started because the number of maximal simultaneous backups has been exceeded. Indicates that the backup status could not be identified (for example. This component can then no longer be selected. 5. Message n. Incomplete (the component data could not be fully identified).3.a. n. User Manual 5-5 . 2007-03-20 Software Manager. A31003-H3570-U101-1-7619. HiPath 3000 ComScendo Service and HiPath 5000 ComScendo Service HiPath 5000 LAN Device Handler DB Feature Server Databases (SQL Server) ● ● ● ● Manual start of complete backup Start the complete backup by clicking the Manually start complete backup now button. You can deactivate the automatic backup or change the default settings for automatic backup under "Backup settings" in the "Settings" menu (see section 6. “Backup settings”).1 Complete backup The complete backup of your data is preset by default.0 or later (earlier HG 1500 boards cannot be backed up using the Software Manager) HiPath 2000 ComScendo Service. The following components located by the system query are backed up: ● HG 1500 boards version 3. XML error Meaning No response (the component did not respond when data was requested). The data request performed by the HiPath Inventory Server returned faulty XML data.SWM_C05.r. Not available (the component could not be contacted).2.fm For internal distribution only Backup of System Components Selecting overviews for the backup The following messages may appear in the Select column instead of the checkboxes. Inc. The data to be backed up for HiPath 3000 ComScendo Service is stored in a KDS file.SWM_C05. this data is stored in a second CONFIG file. 5-6 A31003-H3570-U101-1-7619. 5. “Backup components”. 2007-03-20 Software Manager. 5. The data can only be restored using HG 1500 Web Based Management. “Backup components”.3. The data can only be restored using HG 1500 Web Based Management.4. proceed as described in section 5.fm Backup of System Components Selecting overviews for the backup For internal distribution only 5. proceed as described in section 5. To perform a backup for these components. To perform a backup for these components. If the HiPath 5000 LAN Device Handler is operated in SSL mode.3. this data is stored in a second CONFIG file.4 Backup HiPath 5000 LAN Device Handler Click this menu item to display an overview of all HiPath 5000 LAN Device Handlers.4. The data can only be restored using HiPath Manager E. “Backup components”. proceed as described in section 5.3 Backup HiPath 3000 ComScendo Service Click this menu item to display an overview of all HiPath 3000 ComScendo Services.0 or later (earlier HG 1500 boards cannot be backed up using the Software Manager).3. The data to be backed up for a HiPath 5000 LAN Device Handler is stored in a CONFIG file. The data to be backed up For HG 1500s is stored in a CONFIG file. If the HG 1500 is operated in SSL mode. The HiPath 5000 LAN Device Handler is a HiPath 5000 component and is only displayed if HiPath 5000 is installed in the network. User Manual . To perform a backup for these components.4.2 Backup HG 1500 Click this menu item to display an overview of all HG 1500 boards with version 3. To restore the DB Feature Server.4.3.ini file for the DB Feature Server installation. The data can only be restored using HiPath Manager E. proceed as described in section 5. In the case of the DB Feature Server. The data to be backed up for a HiPath 2000 ComScendo Service is stored in a KDS file and a CONFIG file. As a result.5 Backup HiPath 5000 ComScendo Service Click this menu item to display an overview of all HiPath 5000 ComScendo Services.3.6 Backup HiPath 2000 ComScendo Service Click this menu item to display an overview of all HiPath 2000 ComScendo Services. 5. proceed as described in section 5. SQL Server data is stored in DB files. User Manual 5-7 . “Backup components”. the other backup file for the same node is automatically activated as well. A31003-H3570-U101-1-7619. To perform a backup for these components.SWM_C05.4. a complete node backup is always performed.fm For internal distribution only Backup of System Components Selecting overviews for the backup 5. “Performing SQL restore”.ini file is backed up. 5.5. 2007-03-20 Software Manager.7 Database backup Click this menu item to display an overview of all databases (SQL Server and DB Feature Server). The data to be backed up for a HiPath 5000 ComScendo Service is stored in a KDS file.4. To perform a backup for these components. To perform a backup for these components. This data can only be restored using HiPath Manager E or HiPath 2000 Web Based Management. the vsrv. “Backup components”. To restore SQL databases see section 5.3. When a backup file is selected. replace the vsrv. There are two backup components for the HiPath 2000 ComScendo Service: one for ComScendo and one for the LAN configuration. “Backup components”. proceed as described in section 5. the checkbox in the Select column is grayed out and the component cannot be selected.fm Backup of System Components Backup components For internal distribution only 5. Refresh button You can manually reload the HTML page displayed by clicking the Refresh button. Click the Backup button to start the backup procedure.1. 3. Select the components either individually in the Select column or select all itemized components with the Select all checkbox in the action menu. User Manual .SWM_C05. Cyclical option If the Cyclical checkbox is activated. > While a component backup process is active. If the component is not available for some other reason. the currently displayed HTML page will be automatically refreshed after a specified interval. “General settings”). Backup components Select one of the overviews. 2007-03-20 Software Manager. You can specify the interval in the “Settings” menu under “General settings” (see section 6.4 1. deactivate the Cyclical option first. 2. 5-8 A31003-H3570-U101-1-7619. a message appears in the Select column. If you want to make a configuration change. the MSDE must be started as a service again. For information on restoring other components. please refer to the documentation for HiPath Manager E and for HG 1500 Web Based Management. User Manual 5-9 . please refer to the MSDE documentation. After the Master database has been restored. MSDB database (SQL server system database). 7 Any changes made to the selected database after the time of the selected backup will be lost. the MSDE must be working in individual user mode. 2007-03-20 Software Manager.SWM_C05. To restore the Master database. select the database backup you would like to restore and click the SQL restore button. ● ● > 1. This view only displays WBService database backups. If you click the Extended checkbox.fm For internal distribution only Backup of System Components Performing SQL restore 5. From the list. 2. you only need to restore the WBService database.5 Performing SQL restore You can restore the following SQL databases: ● WBService database (configuration and call charge data from PCM and Call Accounting. A31003-H3570-U101-1-7619. For more information on changing the user modi. Master database (SQL server system database). exit the SQL server and go to the DOS shell. Start the file sqlservr. Usually. configuration data from the Inventory Manager and Software Manager). an overview of all databases is displayed.exe with the parameter "-m". ● ● ● master msdb WBService To restore a Master database. Click the SQL restore button to obtain an overview of the databases that can be restored. Indicates the path under which the database was saved.SWM_C05. User Manual . 2007-03-20 Software Manager. Indicates the time of the last backup. Meaning Checkbox for selecting the database. Indicates that the MSDE must be operating in individual user mode during restoration. Database Requirement 5-10 A31003-H3570-U101-1-7619.fm Backup of System Components Performing SQL restore For internal distribution only Displaying the overview The individual columns of the displayed overviews have the following meanings: Column Select Date – – – – – – – Path <Date> <Time> master msdb WBService Multi Single Indicates the date of the last backup. Master database MSDB database WBService database Indicates that the MSDE must be operating in multi user mode during restoration. User Manual 6-1 . you can also enter the SNMP read community for the HiPath network here. This requires the Cyclical option to have been clicked on the corresponding HTML pages.1 General settings Under this submenu item. In addition. The following sections describe the settings in detail. Click the Apply button to confirm your settings.fm For internal distribution only Settings General settings 6 Settings General settings Backup settings Upgrade settings HG1500 settings This menu item is divided into: ● ● ● ● Under this menu item. The Reset button undoes the last changes made. you can specify the interval at which HTML pages are refreshed. SNMP Read Community Meaning Enter the interval in seconds at which HTML pages are refreshed. A31003-H3570-U101-1-7619. you can also configure cyclic processes. The password is required for requesting individual nodes. The DB Feature Server provides the Software Manager with the SNMP write community.SWM_C06. 6. 2007-03-20 Software Manager. Input field Refresh cycle for auto reloading pages in sec. In addition. you can enter the default settings for creating backups and updating system components. 2007-03-20 Software Manager. enter the domain and user names and the password here to gain access to the network drive. Backup onto a local device Backup onto a remote device Username (DomainName/ Username) Password: Activate automatic backup Automatic backup cycle in days If the Activate automatic backup box is checked. User Manual . You must check beforehand under which account Software Manager has been started. “Software Manager Environment”). you can specify how many previous backups for the same component should be retained and how many backup processes should run simultaneously. corresponding rights must be configured under Windows. Select this option if you want to store the backup files on a network drive. Input field Backup path Meaning Specify the path where the backup files should be saved.fm Settings Backup settings For internal distribution only 6. In addition. you can now enter the interval in days after which a backup of your data should be performed automatically.SWM_C06. ● The data for the automatic complete backup is set by default during setup and can be subsequently changed in this menu. 6-2 A31003-H3570-U101-1-7619. ● ● Select the directory in which the backup service should store the backup files. A backup should not be performed on the local hard disk. The destination can be any PC within your HiPath network. If you selected the Backup to a network drive option. If automatic backup is activated (default setting). you can make further settings. This account must have write permission for the selected backup directory (see also section A. Activate the checkbox if you want the backup to be performed automatically. You can activate or deactivate automatic backup of the complete system.2 Backup settings Make the relevant settings for the backup here. To enable write access to the network drive. The network path should have the UNC format “\\<Host>\<Share>\<Backup path>” and must be created beforehand.1. You also need to enter the domain and user names and the password for access to the network drive. Select this option if you want to store the backup files on a local drive. Default setting: 1. you can select the time at which the backup should be automatically performed once the set number of days have passed. the last backup will be deleted.SWM_C06.fm For internal distribution only Settings Backup settings Input field Scheduled time for automatic backup Meaning If the Activate automatic backup checkbox is activated. Start date of the next backup Maximum amount of saved backups Maximum amount of simultaneous backup processes Click the Apply button to confirm your settings. A31003-H3570-U101-1-7619. Specify here how many backup processes can run at the same time. as it may lead to a high processor load in larger systems and thus impair the entire system. It is important to limit the number. Default setting: 3. Default setting: Installation day. you can select the date on which the automatic backup should next be performed. Specify here how many previous backups of the same component should be retained. 2007-03-20 Software Manager. The Reset button undoes the last changes made. User Manual 6-3 . Default setting: 7. Whenever the maximum number of backups has been reached. Default setting: 23:50 If the Activate automatic backup checkbox is activated. You will not subsequently need to enter the IP address of the TFTP server. files The APS file extensions are *. It is important to limit the number. actions are performed at the times set for the PC server. This also includes potential differences caused by daylight saving time. as it may lead to a high processor load in larger systems and thus impair the entire system. Local TFTP directory for the APS Specify the local path where the APS files should be saved. *. “Software Manager Environment”).3 Upgrade settings Make the relevant settings here for the upgrade.fli for HiPath 3000 ComScendo Service. Specify here how many upgrade processes can run simultaneously.fm Settings Upgrade settings For internal distribution only 6.SWM_C06.1. Default setting: 3. 2007-03-20 Software Manager. then enter the IP address of the TFTP server here. If this option is not activated. To change the IP address manually. For component upgrade. User Manual . If there is no TFTP server installed locally on this computer. 6-4 A31003-H3570-U101-1-7619. the APS files are first copied to a TFTP server from which the data can be accessed (see also section A. Consider time zone This option allows you to take into consideration time zone differences between the server PC and each HiPath node. Activate this option if no TFTP server is installed locally on this computer. The Reset button undoes the last changes made. Maximum amount of simultaneous upgrade processes Click the Apply button to confirm your settings.inst for HG 1500. Input field TFTP server is installed on this computer TFTP server is not installed on this computer TFTP server IP address Meaning Activate this option if a TFTP server is installed locally on this computer. you can enter the new IP address information in the input field here. and *. the programmed times are based on the local time for the HiPath nodes. The IP address of the TFTP server is configured during setup. Then enter the IP address of the TFTP server. If this option is activated.img for HiPath 2000 ComScendo Service. you require the following settings: Input field User name Password Repeated password Http port Meaning Enter the user name for accessing HiPath HG 1500 here. The entered characters are not displayed. If the HiPath network is operating in SSL mode. Https Port Passphrase Repeated passphrase Show Passphrase button Click the Apply button to confirm your settings. Repeat the password for security reasons. when you want to reload the backup to the HG 1500 board. Enter the password for accessing HiPath HG 1500 here.4 HG1500 settings To upgrade or back up a HG 1500 board. The entered characters are not displayed. You also need to provide the correct HTTPS port and passphrase. Enter here a sequence of ASCII characters (7 . you must make the following settings. A31003-H3570-U101-1-7619.fm For internal distribution only Settings HG1500 settings 6. Specify the HTTPS port for the secure connection here (default setting: 443). You will need this passphrase later. User Manual 6-5 .32 characters) for the passphrase used for encrypting the backup. you can use this button to display it in ASCII characters. Input field Secure Mode (SSL) Meaning Select this option if you want to backup the HG 1500 board data over a secure connection. Enter the HG 1500 HTTP port for data transfer in this field (default: 8085). The Reset button undoes the last changes made.SWM_C06. Since the passphrase is normally not displayed. 2007-03-20 Software Manager. To register on the HG 1500 board via this protocol. you require the HTTP protocol. Repeat the passphrase for security reasons. 2007-03-20 Software Manager.fm Settings HG1500 settings For internal distribution only 6-6 A31003-H3570-U101-1-7619.SWM_C06. User Manual . Example: A share called "public" has been created on the PC "pdbh809a". A31003-H3570-U101-1-7619. he/she has no network rights. ComScendo Services) your own PC. TFTP server The APS files for upgrade functionality are stored on the TFTP server. HG 1500. The backup files on this PC should be saved in a subfolder named "backupfiles". backup files can be stored on a separate PC in the network. Normal Windows services run under a user account known as "LocalSystemAccount". PC for central backup files In addition to the local drive. the FM Reporting Client. the DB Feature Server. The Software Manager has been implemented as a Windows service so that it can start without a user logon. MSDE. 2007-03-20 Software Manager. However. the Common Web Service and the Inventory Manager must always be running on your PC.SWM_A01. User Manual A-1 . the environment comprises a TFTP server a PC for storing the central backup files other HiPath components (for example. Enter the path for this share in the Software Manager backup settings. In addition to the Software Manager. system components can upgrade independently via TFTP. this user is a type of administrator with all the necessary rights. On the local PC. the TFTP server can be installed on the same PC as Software Manager. The backup path should be: \\pdbh809a\public\backupfiles. The IP address of this server must be known. as it is requested during Software Manager setup.fm For internal distribution only Appendix Software Manager Environment A A. A Windows file share must be set up so that the Software Manager can access this drive. because this user does not have to be authenticated on the system.1 ● ● ● ● ● Appendix Software Manager Environment From the Software Manager point of view. Depending on the system configuration. From here. fm Appendix Software Manager Environment For internal distribution only As a result. for example. in other words a network share Password aging should not be activated in this account. 2007-03-20 Software Manager. This expansion is required if. If these rights are deactivated.SWM_A01. as additional administrative work would be required to run the service again after the password has expired The user should be a domain user who is known network-wide ● This user must be entered in the Software Manager backup settings together with the relevant password. the Software Manager will not be able to access the boards (WBM via "Explorer->Security"). Other HiPath components The authorization rights for the Software Manager PC must not be deactivated for HG 1500 boards. Please also ensure that the share directories of all default components have Read permission set for the account on which the Software Manager is running (as with the central backup file directory). User Manual . HiPath 5000 LAN Device Handlers or HiPath 2000 ComScendo Services. a user with the following authorization rights must be configured for creating file backups on the network drive: ● ● Full access rights to the central backup directory. a HiPath 5000 is available. A-2 A31003-H3570-U101-1-7619. User Manual A-3 . 2007-03-20 Software Manager. 2. Configuring the proxy server settings 1. you need only check the Bypass proxy server for local addresses box. Software Manager in the same network segment If Software Manager is in the same network segment. A31003-H3570-U101-1-7619.2 Bypassing the Proxy Server The IP address for accessing Software Manager should not be routed via the proxy server.fm For internal distribution only Appendix Bypassing the Proxy Server A. Click Start/Settings/Control Panel/Internet Options.SWM_A01. Select the Connections tab and click the "Settings" button in the LAN Settings field. 2007-03-20 Software Manager. click the Advanced button. this must be entered in the Exceptions field. A-4 A31003-H3570-U101-1-7619.fm Appendix Bypassing the Proxy Server For internal distribution only Software Manager in a different network segment If Software Manager is in a different network segment or if you only wish to exclude one IP address from using the proxy.SWM_A01. To do this. User Manual . User Manual Y-1 .fm For internal distribution only List of Abbreviations List of Abbreviations Abbreviations and their meanings as used in this document: Abbreviation akt DB FM HTML HTTP HTTPS IP JRE LAN LDH MSDB MSDE PC shdw SNMP SQL SSL SW TFTP XML Definition Current software Database Fault Management Hyper Text Markup Language Hyper Text Transfer Protocol Hyper Text Transfer Protocol Secured Socket Layer Internet Protocol Java Runtime Environment Local Area Network LAN Device Handler Main Storage Data Base Microsoft Data Engine Personal Computer Software in the shadow area Simple Network Management Protocol Structured Query Language Secure Socket Layer Software Trivial File Transfer Protocol Extensible Markup Language Y A31003-H3570-U101-1-7619.SWM_ABB. 2007-03-20 Software Manager. User Manual .SWM_ABB.fm List of Abbreviations For internal distribution only Y-2 A31003-H3570-U101-1-7619. 2007-03-20 Software Manager. 2-7 Z S Select 2-7 Settings 6-1 Backup 6-2 General 6-1 HG 1500 V3. 2-8 Typographical conventions 1-5 M Marker 2-7 U Upgrade 4-1 N Navigation area 2-5 W Work area 2-5.0 6-5 Upgrade 6-4 Sort key 2-6 SQL restore 5-9 Status bar 2-5. 2-6 O Overview Backup 5-3 HiPath network 1-2 System information request 3-2 Upgrade 4-1 A31003-H3570-U101-1-7619.SWMIX. 2-8 Symbols 1-5 System components Backup 5-1 Updating 4-1 System information Updating 3-1 B Backup 5-5 Backup files 5-2 C Complete backup 5-5 D Directory structure 5-1 Display 2-6 I Interface 2-4 L Logging off 2-3 Logging on 2-2 Login 2-1 T Toolbar 2-5. 2007-03-20 Software Manager.fm For internal distribution only Index Index A Action menu 2-5. User Manual Z-1 . 2007-03-20 Software Manager.SWMIX.fm Index For internal distribution only Z-2 A31003-H3570-U101-1-7619. User Manual . . Germany Reference No.www.: A31003-H3570-U101-1-7619 Subject to availability. Right of modification reserved. .com/hipath The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. KG or their respective owners. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. KG. The trademarks used are owned by Siemens Enterprise Communications GmbH & Co. 2007 Hofmannstraße 51.siemens. *1PA31003-H3570-U101-1-7619* Siemens Enterprise Communications GmbH & Co. D-81359 Munich.