Component catalogue 2013Component catalogue 2013 Who are Helvar Helvar is an international lighting technology company specialising in energy-efficient components and solutions for lighting and lighting control systems. Our luminaire component portfolio consists of LED drivers, electronic and magnetic ballasts for fluorescent and high intensity discharge lamps as well as sensors complemented with an extensive range of lighting control products and systems. Helvar has representatives all over the world. For additional information, please visit www.helvar.com Due to a policy of continuous improvement, Helvar reserve the right to alter specifications without notice at anytime. REF C24 013 1A 17/04/2013 English www.helvar.com Head Office United Kingdom Helvar Oy Ab Helvar Ltd Yrittäjäntie 23 FI - 03600 Karkkila Finland Hawley Mill Hawley Road Dartford Kent, DA2 7SY United Kingdom Tel: +358 9 5654 1 Tel: +44 (0)1322 222211 Finland Germany Helvar Oy Ab Helvar GmbH Vetotie 3 FI-01610 Vantaa Tel: +358 9 5654 1 Philipp-Reis-Straße 4-8 DE-63150 Heusenstamm Germany Tel: +49 (0) 6104 / 78075 - 0 Italy Sweden Helvar S.r.l. Helvar AB Via W-Tobagi 26/1 IT - 20068 Peschiera Borromeo (MI) Italy Åsögatan 155 SE-11632 Stockholm Sweden Tel: Tel: +39 02 55 30 10 33 +46 (0) 8 545 239 70 Hungary Russia Helvar Kft. Representative Office of Helvar Oy Ab Lomb u. 31/b. HU-1139 Budapest Hungary Sadovnicheskaya naberezhnaya 79 115035 Moscow Russia Tel: Tel: +36 1 2393 136 + 7 (495) 743-34-82 France China Helvar Bureau France Helvar Lighting (Suzhou) Co., Ltd. 12 Allée Joséphine de Beauharnais FR-95320 Saint-Leu-la-Forêt France 15F International Building, 2 Suzhou Avenue West, SIP, Suzhou, 215021 Tel: Tel: +33 1 3418 1281 + 86 512 6763 3078 Helvar has representatives all over the world. For additional information, please visit www.helvar.com LED drivers and accessories Dimmable constant current LED drivers Non-dimmable constant current LED drivers LED wiring & connectivity, dimensions Accessories for Helvar LED drivers Digital DALI controllable electronic ballasts EL-iDim for T5-fluorescent lamps EL-iDim for T8-fluorescent lamps EL-iDim, EL-iDim-c for Compact fluorescent lamps Wiring diagrams & technical characteristics Switch-Control information Analogue (1-10 V) controllable electronic ballasts 4 11 20 24 1 28 30 32 33 2 35 38 40 41 42 43 3 46 52 55 62 4 67 5 72 74 75 76 6 77 80 81 7 84 86 88 89 91 92 94 8 Electronic ballasts Magnetic ballasts Quantity of ballasts for MCB’s Wire release instructions EL-s wiring options Lamp markings 98 100 102 108 109 110 9 iDim Concept Minisensor 112 116 10 µDim sensors 117 MIMO2 Constant light sensor, MIMO3 sensor TK4 1-10 V Ballast controller 123 125 EL-sc for T5-fluorescent lamps EL-sc for T8-fluorescent lamps EL-sc for Compact fluorescent lamps Wiring diagrams & technical characteristics Switch-Control information Standard electronic ballasts EL-ngn5, EL-s, EL-su for T5-fluorescent lamps EL-s, EL-su EL-ngn, EL-es for T8-fluorescent lamps EL-ngn5, EL-s, EL-TCs for Compact fluorescent lamps Wiring diagrams & technical characteristics Electronic ballasts for HID-lamps EP-h Electronic ballasts for HID-lamps Ballasts for fluorescent T8 Lamps 230 V 50 Hz 240 V 50 Hz 220 V 50 Hz Wiring diagrams, dimensions and delivery information Ballasts for compact fluorescent lamps 230 V 50 Hz 240 V 50 Hz Wiring diagrams, dimensions and delivery information Ballasts & ignitors for HID-lamps Ballasts for high pressure mercury lamps Ballasts for high pressure sodium lamps Power reduction ballasts for high pressure sodium Ballasts for metal halide lamps Ballasts for HID-lamps (220 V) Wiring diagrams, dimensions and delivery information Electronic superimposed pulse ignitors General information and instructions for use Sensors iDim Sense Minisensor3 SL-PIR-SW, SL-PIR-AN SL-MW-SW, SL-MW-AN, SL-MW-DA MIMO2, MIMO3 140xxx Lamp ballast compatibility & approvals 126 A More information at: www. The LED drivers can be used for indoor and outdoor applications for spot lights. Home Outlook Further exciting LED product developments are in the pipeline for 2013. Stay in tune with our website for continuous new LED products. The 2 dimmable drivers ensure reliable and smooth dimming from 1 % . The Helvar LED range is designed for easy installation and long life. All drivers provide power with high efficiency.freedom in lighting LED Drivers Helvar’s LED offering includes a range of Constant Current drivers including dimmable and nondimmable solutions.100 %. down lights. Helvar | Data is subject to change without notice. MIMO3) and networked applications (DIGIDIM Router). showing Helvar’s continuous commitment to supporting luminaire manufacturers in making a successful transition to LED. suitable for both luminaire based (μDim. Helvar’s LED drivers are complemented by a full and compatible range of Helvar controls and sensor solutions.helvar. iDim.com Prev Next . flood lights and linear strip lighting. output Power DALI Home 1 . Following look-up table provides an easy LED driver summary. In addition it lists it control interface and maximum power rating.helvar. The table links each LED driver to its typical application area. More information at: www.com/downloads/ledesign-standalone Helvar | Data is subject to change without notice.com 3 . More detail can be found on the product pages.DMX Max. LL6-U-CC - - - 7 11 LL20-U-CC - - - 20 12 - 20 4 - 30 13 Driver type LL1x20-E-DA - - LC1x30-E-CC LC1x30-E-AN - LC1x30-E-DA - LL2x35-E-DA - LL1x70-E-CC LL1x70-E-DA - - - - - - LL2x35-E-CC - - LL1x40-E-CC LL1x40-E-DA - - - Page - 30 6 - 30 5 - 40 14 - 40 7 - 2x35 16 - 2x35 9 - 70 15 - 70 8 OL1x60-E-CC - - - 63 17 OL1x100-E-CC1 - - - 105 18 OL1x100-E-CC2 - - - 101 19 - - 50 10 LC50-U-DX3 - Prev Next To download the Helvar LEDesign calculator go to: http://www.10 V Switching Helvar’s LED drivers have been developed based on our expertise and knowledge of the key LED applications in the lighting market.helvar. 2) Helvar | Data is subject to change without notice. For availability please check with your sales representative Connections Alternative parallel connection L N (+) Next Itot = 350 / 500 / 700 mA Switch-Control I2 I1 Ifv = I1 + I2 + .com Prev In (-) DALI Home . acc to EN 62384 Digital adressing lighting interface (DALI) ** EN62386-207 Compliant with relevant EU directives ENEC. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker.86 I-OUT P-out (max) U-OUT λ η @ max 350 mA 20 W 10-57 V 0.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5m Weight 110 g IP rating IP20 Load Output Output current 350 / 500 / 700 mA 20 W Max output power Efficiency.60 Hz • Selectable constant current output: 350 / 500 / 700 mA • Maximum 20 W load • DALI control input. at TC max (90 % survival rate) 4 Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.86 Operating Conditions and Characteristics Max.92c 0. typical ≥ 0.c.86 * Preliminary information. CE & SELV marked ** with additional extensions Note: See page 22 for dimensions.LL1x20-E-DA * 1x20 W Dimmable DALI LED driver 20 W 220 .240 V. acc.1. acc to EN 61000-3-3 Radio Frequency Interference.c.92c 0.0. or a. starting voltage > 190 VDC Max mains current at full load 0.09 .280 VDC. ≥ 0. + In = 350 / 500 / 700 mA +/.89c 0.86 500 mA 20 W 10-40 V 0.264 VAC DC range 176 . C5e Mains current harmonics. (no. 1 %-100 % dimming range • Low stand-by power 0. at full load. More information at: www.. acc.5 . to EN 61547 Performance requirements.helvar. supplied electronic controlgear for LED modules.3 W Wire size 0.temperature at tc point 75 °C Ambient temperature range -20…+50 °C Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000 h. to EN 61347-2-13 Thermal protection class EN61347.6 W 10-28 V 0.86 700 mA 19. 50 . acc.5% Note: Not suitable for load side switching operation. Mains Characteristics Connections and Mechanical Data Voltage range 198 . acc.3 W • Protected up to 4 kV power network fast transients • High efficiency.12 A Frequency 0 / 50 .. to EN 55015 Immunity standard.60 Hz U-OUTmax (abnormal) 80 V Stand-by power 0. CE & SELV marked ** with additional extensions Note: See page 22 for dimensions. at TC max (90 % survival rate) Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.90c 0.43 V 0.60 V 0. acc.94c 0. Mains Characteristics Connections and Mechanical Data Voltage range 198 .5 .3 W • Protected up to 4 kV power network fast transients • High efficiency.com 17. acc to EN 61000-3-3 Radio Frequency Interference.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5m (1 m with NTC) Weight 123 g (+17 g. supplied electronic controlgear for LED modules.86 500 mA 30 W 10 . acc. 1 %-100 % dimming range • Low stand-by power 0..temperature at tc point 75 °C Ambient temperature range -20…+50 °C * (* Independent use ta max = +45 °C) Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000 h. or a.60 V 0.c..14-0. starting voltage > 190 VDC Max mains current at full load 0.94c 0.18 A Frequency 0 / 50 .2 kΩ IP rating IP20 Load Output Output current (I-OUT) 350 / 500 / 700 mA (custom output currents 245-700 mA on request) Max output power 30 W Efficiency. More information at: www.3 W Wire size 0. acc.LC1x30-E-DA 1x30 W Dimmable DALI LED driver • Selectable constant current output: 350 / 500 / 700 mA (custom currents on request) 30 W 220-240 VAC. strain relief LC1x30-SR) Thermal sensor input Input for external NTC thermal sensor NTC trigger point 8.helvar.280 VDC.c.1. 0.264 VAC DC range 176 . acc to EN 62384 Digital adressing lighting interface (DALI) ** EN62386-207 Compliant with relevant EU directives ENEC.04.86 Operating Conditions and Characteristics Max. (no. typical ≥ 0.86 I-OUT P-out (max) U-OUT λ η @ max 350 mA 21 W 10 . to EN 61347-2-13 Thermal protection class EN61347. C5e EN 61000-3-2 Mains current harmonics. to EN 61547 Performance requirements.86 700 mA 30 W 10 . 3 & 4) Helvar | Data is subject to change without notice. to EN 55015 Immunity standard.60 Hz 80 V U-OUTmax (abnormal) Stand-by power 0.2013 1/1 5 .86 • Optional click-on strain relief for independent use • External NTC thermal input • iDim compatible Connections L N DALI Alternative parallel connection Home Prev Switch-Control In NTC Next I2 (-) (+) I1 Ifv = 350 / 500 / 700 mA Ifv Ifv = I1 + I2 + . at full load. + In = 350 / 500 / 700 mA +/.5% Note: Not suitable for load side switching operation. acc. 50-60 Hz • Maximum 30 W load • DALI control input. to Limits for Voltage Fluctuations and Flicker. 3 & 4) 6 Helvar | Data is subject to change without notice. at TC max (90 % survival rate) Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.86 I-OUT P-out (max) U-OUT λ η @ max 350 mA 21 W 10 .60 V 0..86 700 mA 30 W 10 .2013 1/1 .264 VAC DC range 176 .5 . to EN 61547 Performance requirements.LC1x30-E-AN 1x30 W Dimmable 1-10 V LED driver • Selectable constant current output: 350 / 500 / 700 mA 30 W 220-240 VAC. CE & SELV marked Note: See page 22 for dimensions. typical ≥ 0. 50-60 Hz • Maximum 30 W load • 1-10 V control input. strain relief LC1x30-SR) Thermal sensor input Input for external NTC thermal sensor NTC trigger point 8. to EN 60929 Compliant with relevant EU directives ENEC.14-0.1. acc. (no. + In = 350 / 500 / 700 mA +/.60 Hz 80 V U-OUTmax (abnormal) Wire size 0. 0.86 Operating Conditions and Characteristics Max. Mains Characteristics Connections and Mechanical Data Voltage range 198 .94c 0.86 500 mA 30 W 10 . to EN 55015 Immunity standard.18 A Frequency 0 / 50 . to EN 61347-2-13 Thermal protection class EN61347.helvar. acc.c.04.c. C5e Mains current harmonics. acc.com 17.90c 0. or a. More information at: www.43 V 0. 1 %-100 % dimming range • Protected up to 4 kV power network fast transients • High efficiency.temperature at tc point 75 °C Ambient temperature range -20…+50 °C * (* Independent use ta max = +45 °C) Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000 h.60 V 0. acc. supplied electronic controlgear for LED modules. at full load. starting voltage > 190 VDC Max mains current at full load 0..5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5m (1 m with NTC) Weight 126 g (+17 g.2 kΩ IP rating IP20 Load Output Output current (I-OUT) 350 / 500 / 700 mA Max output power 30 W Efficiency.5% Note: Not suitable for load side switching operation.86 • Optional click-on strain relief for independent use • External NTC thermal input • MIMO3 and μDim sensor compatible Connections Alternative parallel connection L N 1-10 V NTC Home In Prev I2 Next (-) (+) I1 Ifv = 350 / 500 / 700 mA Ifv Ifv = I1 + I2 + .94c 0. acc to EN 62384 1-10 V Control acc.280 VDC. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker. acc to EN 61000-3-3 Radio Frequency Interference. 2 kΩ IP rating IP20 Load Output Output current (I-OUT) 350 mA (default) . acc.95 0.18-0.c.280 VDC. supplied electronic controlgear for LED modules.com 7 .4 W • Protected up to 4 kV power network fast transients • High efficiency. (no. CE & SELV marked * with additional extensions Note: See page 22 for dimensions.80 V 20 .. acc to EN 61000-3-3 Radio Frequency Interference.4 W Wire size 0. II or SELV luminaire • External NTC thermal input • Current setting resistor input • Optional click-on strain relief for independent use * Preliminary information. acc.100 % dimming range • Low standby power 0. More information at: www. at full load.c.89 I-OUT P-out (max) 350 mA 1050 mA 28 W 40 W 20 . strain relief LL1x40-SR) Thermal sensor input Input for external NTC thermal sensor NTC trigger point 8. acc.86 U-OUT Operating Conditions and Characteristics Max. or a. 0.23 A Frequency 0 / 50 .1050 mA 40 W Max output power Efficiency. 50-60 Hz • DALI control input 1 % . to EN 55015 Immunity standard. to EN 61547 Performance requirements. 8) Helvar | Data is subject to change without notice. acc to EN 62384 Digital adressing lighting interface (DALI) ** EN62386-207 Compliant with relevant EU directives ENEC.helvar.60 Hz 100 V U-OUTmax (abnormal) Stand-by power 0. C5e EN 61000-3-2 Mains current harmonics.temperature at tc point 75 °C Ambient temperature range -20…+50 °C * Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000h. For availability please check with your sales representative Connections Alternative parallel connection Home In I2 Ifv = 350 .9 kΩ 500 mA 1.264 VAC DC range 176 .1.5 .38 V λ 0.LL1x40-E-DA * 1x40 W Dimmable DALI LED driver • Adjustable constant current output: 350 mA (default) . + In Switch-Control Next DALI NTC L N R Note: Not suitable for load side switching operation.1050 mA 40 W 220-240 VAC.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5m (1 m with NTC) Weight 150 g (+10 g.89 • Overload. Current setting (p.89 0. starting voltage > 190 VDC Max mains current at full load 0. to EN 61347-2-13 Thermal protection class EN61347. typical ≥ 0.0 kΩ 700 mA 0Ω 1050 mA Mains Characteristics Connections and Mechanical Data Voltage range 198 . at TC max (90 % survival rate) Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.97 η @ max 0. acc.. to Limits for Voltage Fluctuations and Flicker.21) Resistor R output Ifv open 350 mA 3. open & short circuit protection • Suitable for Class I.1050 mA Prev I1 Ifv = I1 + I2 + . helvar.98 0. > 0. acc to EN 61000-3-3 Radio Frequency Interference.200 V 0. typical ≥ 0. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker.280 VDC. short & open circuit protection • Accept DC mains in case of central emergency battery • High efficiency. to EN 61347-2-13 Thermal protection class EN61347.2 kΩ 0Ω Note: • Not suitable for load side switching operation.264 VAC DC range 176 .c.98 0.91 • Suitable for class I luminaires • Current setting resistor input Connections Home Ifv = 350 . acc. or a.com 17.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time 75 °C -20…+50 °C * -40…+80 °C no condensation 50 000h.700 mA Prev L N R DA Next Switch-Control Current setting (p. More information at: www. supplied electronic controlgear for LED modules.60 Hz 400 V U-OUTmax (abnormal) Stand-by power 0. 21) Resistor R open 8.42 A Frequency 0 / 50 .LL1x70-E-DA 1x70 W Dimmable DALI LED driver • Adjustable constant current output: 350 mA (default) .c.91 Operating Conditions and Characteristics Max.4 W Maximum driver to LED wire length 5m Weight 242 g IP rating IP20 Load Output Output current (I-OUT) 350 mA (default) .100 V 0. at TC max (90 % survival rate) Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.700 mA 70 W Max output power Efficiency. to EN 61547 Performance requirements. acc.04. acc.700 mA • Dali control input 1 %-100 % dimming range 70 W 220-240 VAC 50-60 Hz • Low standby power 0. acc. 7) 8 Helvar | Data is subject to change without notice. at full load.33. acc to EN 62384 Digital adressing lighting interface (DALI) * EN62386-207 Compliant with relevant EU directives ENEC & CE marked * with additional extensions Note: See page 22 for dimensions. (no.2013 1/1 .91 700 mA 70 W 50 . C5e Mains current harmonics.0. starting voltage > 195 VDC Max mains current at full load 0.4 W • Protected up to 4 kV power network fast transients • Overload. • Driver output and current setting circuit are not isolated from mains output Ifv 350mA 500mA 700mA Mains Characteristics Connections and Mechanical Data Voltage range 198 .91 I-OUT P-out (max) U-OUT λ η @ max 350 mA 70 W 50 . to EN 55015 Immunity standard. For availability please check with your sales representative Connections Home Ifv = 350 . to EN 61547 Performance requirements. open & short circuit protection • Suitable for Class I or II luminaire • External NTC thermal input • Current setting resistor input * Preliminary information.9 I-OUT 350 mA P-out (max) / channel 35 W / ch U-OUT 25-100 V λ (both channels loaded) 0. acc.700 mA • Two independent SELV rated output channels 2x35 W 220-240 VAC 50-60 Hz • DALI control input 1 % .60 Hz 120 V U-OUTmax (abnormal) Stand-by power 0. at full load. acc. acc. at TC max (90 % survival rate) Compliant with relevant EU directives ENEC.98 0. 0.CE & SELV marked ** with additional extensions Note: See page 22 for dimensions. 21) Resistor R open 0Ω output Ifv 350mA 700mA Mains Characteristics Connections and Mechanical Data Voltage range 198 .temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time Conformity & Standards 80 °C -20…+50 °C -40…+80 °C no condensation 50 000h.9 • Overload. acc. supplied electronic controlgear for LED modules.87 Operating Conditions and Characteristics Max. 8) Helvar | Data is subject to change without notice. More information at: www. • Wrong wiring will serious damage the product • PE needs not to be connected in class II luminaires if they are suitably designed Current setting (p. to EN 61347-2-13 Thermal protection class EN61347.5 W • Protected up to 4kV power network fast transients • High efficiency.0. typical 0. (no. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker.264 VAC DC range 176 .5 W Maximum driver to LED wire length 5m Weight 365 g IP rating IP20 NTC trigger point 8.c.33.9 700 mA 35 W / ch 25-50 V General and safety requirements EN 61347-1 Particular safety requirements for d.700 mA Prev L N R DA Switch-Control Next NTC Note: • Not suitable for load side switching operation.com 9 .280 VDC. to EN 55015 Immunity standard.c. or a.98 η (both ch loaded @ max) 0. acc to EN 62384 Digital adressing lighting interface (DALI) ** EN62386-207 0.100 % dimming range • Low standby power 0. starting voltage > 190 VDC Max mains current at full load 0.700 mA 35 W / channel Max output power Efficiency. acc to EN 61000-3-3 Radio Frequency Interference.42 A Frequency 0 / 50 .2 kΩ Load Output Output current (I-OUT) 350 mA (default) .helvar.LL2x35-E-DA * 2x35 W Dimmable DALI LED driver • Adjustable constant current output: 350 mA (default) . C5e Mains current harmonics. SELV Optional USB to DMX programming dongle LC50-PR Note: See page 22 for dimensions. at tc max.1 % . at full load. 50-60 Hz • Default output current 350 mA • Programmable output current (350 – 1050 mA) • Programmable DMX512 start address • Optional DMX programming dongle (LC50-PR) • High efficiency.1050 mA 50 W 10 . acc. 230 VAC) Connections Ch1 Ch2 Ch3 (+) Home (-) (+) (-) Prev (+) (-) (+) (-) (+) DMX in (-) NTC NTC (shield) Next DMX in (+) DMX in (-) DMX in (shield) GND L L N N Note: Not suitable for load side switching operation. to EN 61547 Performance requirements. supplied electronic controlgear for LED modules.1.305 VAC 0. to EN 61347-2-13 Thermal protection class EN 61347.89 50 W 50 W 0.60 A 50 / 60 Hz 60 V Load Output Output current (default) 350 mA Output current range (programmable) 350-1050 mA Max. total output power 50 W • Smooth dimming range 0.04.LC50-U-DX3 3 channel DMX LED driver 50 W • Max. total output power Max. (90 % survival rate) Wire size 0.9c 0.9c 0.89 (at full load.100 % 50 W 120 . UL pending. 230 VAC) • High power factor > 0.2013 1/1 . typical I-OUT P-out (max) U-OUT λ η @ max 350 mA 50 W 10 . Mains Characteristics Connections and Mechanical Data Voltage range Max mains current at full load Frequency U-OUTmax (abnormal) 90 .89 350 . 5) 10 Helvar | Data is subject to change without notice.helvar.55 V > 0.0.30 . (no. individual channel power Efficiency. acc to EN 62384 Compliant with relevant EU directives CE.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5 m Weight 350 g IP rating 20 Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d. VDE & ENEC pending.c. or a. acc.com 17.5 .temperature at tc point 85 °C Ambient temperature range -20…+50 °C Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 30 000 h.97c (at full load. acc. C5e Mains current harmonics.89 Operating Conditions and Characteristics Max.55 V > 0. to EN 55015 Immunity standard. acc. to EN 61000-3-2 Radio Frequency Interference.c. 0. More information at: www.250 V. to EN 61347-2-13 Thermal protection class EN61347.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time 80 °C -20…+60 °C -40…+80 °C no condensation 50 000h.04. at full load.80 7.c. supplied electronic controlgear for LED modules.com 17.60 Hz 9W 25 V Load Output Output current Efficiency. acc to EN 62384 Compliant with relevant EU directives ENEC. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5 m Weight 65 g IP rating 20 Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.80 • Linear enclosure with strain relief for independent use • Accepts DC mains in case of central emergency battery Connections Home Alternative parallel connection In Prev (-) I2 Itot = 350 / 700 mA I1 L N Next (+) Ifv Ifv = I1 + I2 + . + In = 350 / 700 mA +/.6 W 7…16 82 80 350 / 700 mA ≥ 0. to EN 55015 Immunity standard. at tc max (90 % survival rate) Wire size 0..LL6-U-CC 1x6 W Constant Current LED driver • Selectable constant current output: 350 / 700 mA 6 W 100 . 1) Helvar | Data is subject to change without notice.1.264 VDC 50 mA (at 240 VAC) 140 mA (at 100 VAC) 0 / 50 .2013 1/1 11 .5% Note: Not suitable for load side switching operation. acc to EN 61000-3-3 Radio Frequency Interference. More information at: www.c.0 W 700 mA 7. (no. 50 .5 . or a. to EN 61547 Performance requirements.60 Hz • Universal supply voltage range • Short circuit protection • Protected up to 4 kV power network fast transients • High efficiency. acc.0 W 7…10 85 80 Operating Conditions and Characteristics Max. acc. CE & SELV marked Note: See page 22 for dimensions. Mains Characteristics Connections and Mechanical Data Voltage range Max mains current at full load Frequency Maximum circuit power U-OUTmax (abnormal) 85 . acc..helvar.264 VAC 100 . 0.240 V. acc. typical Max output power I-OUT P-out (max) U-OUT λ η @ max 350 mA 5. C5e Mains current harmonics. 5 . typical Max output power I-OUT 350 mA P-out (max) 15 W U-OUT 12…43 λ 86 η @ max 85 350 / 700 mA ≥ 0.3 W 12…29 87 86 Operating Conditions and Characteristics Max. to EN 55015 Immunity standard. supplied electronic controlgear for LED modules.com 17. 0.60 Hz 23 W 50 V Load Output Output current Efficiency. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker. 50 . acc.2013 1/1 .60 Hz • Universal supply voltage range • Short circuit protection • Protected up to 4 kV power network fast transients • High efficiency.. acc. at TC max (90 % survival rate) Note: See page 22 for dimensions (no.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5m Weight 110 g IP rating 20 Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d. C5e Mains current harmonics.86 • Linear enclosure with strain relief for independent use • Accepts DC mains in case of central emergency battery Connections 2 A max Home (+) L N Alternative parallel connection In (-) Prev Itot = 350 / 700 mA Supply Voltage Chaining* (only LL20-U-CC) I2 Next I1 Ifv = I1 + I2 + .helvar. acc.04. Mains Characteristics Connections and Mechanical Data Voltage range Max mains current at full load Frequency Maximum circuit power U-OUTmax (abnormal) 85 ..c. acc.5% * max number of converters depends on supply voltage and load (7 pcs.86 20 W 700 mA 20.240 V.264 VAC 100 . at full load.264 VDC 100 mA (at 240 VAC) 230 mA (at 100 VAC) 0 / 50 .c.1. CE & SELV marked 80 °C -20…+60 °C -40…+80 °C no condensation 50 000h. to EN 61347-2-13 Thermal protection class EN61347. More information at: www. acc to EN 61000-3-3 Radio Frequency Interference.2) 12 Helvar | Data is subject to change without notice. or a. + In = 350 / 700 mA +/.LL20-U-CC 1x20 W Constant Current LED driver • Selectable constant current output: 350 / 700 mA 20 W 100 . to EN 61547 Performance requirements. acc to EN 62384 Compliant with relevant EU directives ENEC.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time Wire size 0. max at full load) Note: Not suitable for load side switching operation. 93c 0. acc. supplied electronic controlgear for LED modules.86 I-OUT P-out (max) U-OUT λ η @ max 350 mA 21 W 10 .14-0. 50-60 Hz • Short circuit protection • High efficiency.86 Operating Conditions and Characteristics Max.LC1x30-E-CC 1x30 W Constant Current LED driver • Selectable constant current output: 350 / 500 / 700 mA (fixed) • Maximum 30 W load 30 W 220-240 VAC. starting voltage > 190 VDC Max mains current at full load0. acc. CE & SELV marked Note: See page 22 for dimensions (no.86 700 mA 30 W 10 . to Limits for Voltage Fluctuations and Flicker. typical ≥ 0. at full load...04. to EN 55015 Immunity standard.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5m (1 m with NTC) Weight 115 g (+17 g.2 kΩ IP rating IP20 Load Output Output current (I-OUT) 350 / 500 / 700 mA Max output power 30 W Efficiency.c. acc.280 VDC. acc to EN 61000-3-3 Radio Frequency Interference. to EN 61347-2-13 Thermal protection class EN61347.60 V 0.helvar. acc.2013 1/1 13 .96 0. 3 & 4) Helvar | Data is subject to change without notice. acc to EN 62384 Compliant with relevant EU directives ENEC.1.43 V 0.18 A Frequency 0 / 50 . strain relief LC1x30-SR) Thermal sensor input Input for external NTC thermal sensor NTC trigger point 8. C5e EN 61000-3-2 Mains current harmonics.5% Note: Not suitable for load side switching operation. at TC max (90 % survival rate) Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.60 V 0.5 .60 Hz 80 V U-OUTmax (abnormal) Wire size 0. or a.86 • Optional click-on strain relief for independent use • External NTC thermal input • Protected up to 4 kV power network fast transients Connections Alternative parallel connection L N Home Prev In NTC Next I2 (-) (+) I1 Ifv = 350 / 500 / 700 mA Ifv Ifv = I1 + I2 + .264 VAC DC range 176 .96 0.temperature at tc point 75 °C Ambient temperature range -20…+50 °C * (* Independent use ta max = +45 °C) Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000h. + In = 350 / 500 / 700 mA +/. to EN 61547 Performance requirements. Mains Characteristics Connections and Mechanical Data Voltage range 198 . 0.com 17. More information at: www.86 500 mA 30 W 10 .c. typical ≥ 0..2 kΩ IP rating IP20 Load Output Output current (I-OUT) 350 mA (default) . supplied electronic controlgear for LED modules. acc. II or SELV luminaire • External NTC thermal input • Current setting resistor input * Preliminary information.89 I-OUT P-out (max) U-OUT λ η @ max 350 mA 28 W 20 .18-0.c. acc.23 A Frequency 0 / 50 .1050 mA Max output power 40 W Efficiency. to EN 61547 Performance requirements.0 kΩ 700 mA 0Ω 1050 mA Mains Characteristics Connections and Mechanical Data Voltage range 198 .1050 mA • Protected up to 4kV power network fast transients 40 W 220-240 VAC 50-60 Hz • High efficiency.80 V 0. open & short circuit protection • Suitable for Class I.1. For availability please check with your sales representative Connections In Home I2 Ifv = 350 . at full load. Current setting (p. to EN 61347-2-13 Thermal protection class EN61347. acc.. 0. at TC max (90 % survival rate) Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d. to Limits for Voltage Fluctuations and Flicker.com .38 V 0. C5e EN 61000-3-2 Mains current harmonics. starting voltage > 190 VDC Max mains current at full load 0. CE & SELV marked Note: See page 22 for dimensions.95 0.helvar.280 VDC. acc to EN 61000-3-3 Radio Frequency Interference. + In NTC L N R Note: Not suitable for load side switching operation.6) 14 Next Helvar | Data is subject to change without notice.60 Hz 100 V U-OUTmax (abnormal) Wire size 0. or a.21) Resistor R output Ifv open 350 mA 3.c. to EN 55015 Immunity standard.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5m (1 m with NTC) Weight 150 g (+17 g.264 VAC DC range 176 .97 0.9 kΩ 500 mA 1. acc to EN 62384 Compliant with relevant EU directives ENEC. (no. strain relief LL1x40-SR) Thermal sensor input Input for external NTC thermal sensor NTC trigger point 8.LL1x40-E-CC * 1x40 W Constant Current LED driver • Adjustable constant current output: 350 mA (default) .1050 mA I1 Prev Ifv = I1 + I2 + . More information at: www.5 . acc.89 • Overload.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time 75 °C -20…+50 °C -40…+80 °C no condensation 50 000h.86 Operating Conditions and Characteristics Max.89 1050 mA 40 W 20 . starting voltage > 195 VDC Max mains current at full load 0. acc to EN 61000-3-3 Radio Frequency Interference.5 .com 17. to EN 61347-2-13 Thermal protection class EN61347.200 V 0. More information at: www. 21) Resistor R output Ifv open 350mA 8.32 .LL1x70-E-CC 1x70 W Constant Current LED driver • Overload. C5e Mains current harmonics. or a.98 0.2013 1/1 15 .0. to EN 55015 Immunity standard.264 VAC DC range 176 .c. Driver output and current setting circuit are not isolated from mains Mains Characteristics Connections and Mechanical Data Voltage range 198 .c.280 VDC.helvar.100 V 0. acc.04.91 • Protected up to 4 kV power network fast transients • Suitable for Class I luminaires • Current setting resistor input Connections Home Ifv = 350 .41 A Frequency 0 / 50 . supplied electronic controlgear for LED modules. acc.700 mA Prev L N R Next Current setting (p. to EN 61547 Performance requirements.60 Hz 400 V U-OUTmax (abnormal) Wire size 0. acc to EN 62384 Compliant with relevant EU directives ENEC & CE marked Note: See page 23 for dimensions (no. short & open circuit protection • Suitable for class I luminaires 70 W 220-240 VAC 50-60 Hz • Adjustable constant current output: 350 (default) to 700 mA • Maximum 70 W load • Accept DC mains in case of central emergency battery • High efficiency > 0.5 mm2 Wire type solid core and fine-stranded Maximum driver to LED wire length 5 m Weight 227 g IP rating IP20 Load Output Output current (I-OUT) 350 (default) to 700 mA Max output power 70 W Efficiency. at full load. typical > 0.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time 75 °C -20…+50 °C -40…+80 °C no condensation 50 000 h.2 kΩ 500mA 0Ω 700mA Note: Not suitable for load side switching operation.1.91 700 mA 70 W 50 . at TC max (90 % survival rate) Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.98 0. acc.89 Operating Conditions and Characteristics Max.7) Helvar | Data is subject to change without notice. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker. acc.91 I-OUT P-out (max) U-OUT λ η @ max 350 mA 70 W 50 . to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker.91 I-OUT P-out (max) / channel U-OUT λ (both channels loaded) η (both ch loaded @ max) 350 mA 35 W / ch 25-100 V 0. 21) Resistor R open 0Ω Mains Characteristics Connections and Mechanical Data Voltage range 198 . For availability please check with your sales representative.com .CE & SELV marked Max.2 kΩ Load Output Output current (I-OUT) 350 mA (default) . C5e Mains current harmonics. typical 0. acc.264 VAC DC range 176 . Connections Home Prev Ifv = 350 . More information at: www. acc to EN 61000-3-3 Radio Frequency Interference.700 mA Max output power 35 W / channel Efficiency. (no. to EN 55015 Immunity standard.91 700 mA 35 W / ch 25-50 V 0. to EN 61347-2-13 Thermal protection class EN61347.c.91 • overload open & short circuit protection • Suitable for Class I or II luminaire • External NTC thermal input • Current setting resistor input * Preliminary information.33. supplied electronic controlgear for LED modules. • Wrong wiring will serious damage the product • PE needs not to be connected in class II luminaires if they are suitably designed Current setting (p.42 A Frequency 0 / 50 .98 0.98 0. acc to EN 62384 Compliant with relevant EU directives ENEC. starting voltage > 190 VDC Max mains current at full load 0.LL2x35-E-CC * 2x35 W Constant Current LED driver • Adjustable constant current output: 350 mA (default) .88 Operating Conditions and Characteristics Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.700 mA • Two independent SELV rated output channels 2x35 W 220-240 VAC. acc. at TC max (90 % survival rate) Note: See page 23 for dimensions.0. 8) 16 output Ifv 350mA 700mA Helvar | Data is subject to change without notice.60 Hz 120 V U-OUTmax (abnormal) Maximum driver to LED wire length 5m Weight 365 g IP rating IP20 NTC trigger point 8. acc. or a.temperature at tc point 80 °C Ambient temperature range -20…+50 °C Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000h. 50-60 Hz • Protected up to 4 kV power network fast transients • High efficiency ≥ 0. at full load. acc.helvar.c. to EN 61547 Performance requirements.280 VDC.700 mA L N R Next NTC Note: • Not suitable for load side switching operation. 60 Hz 113 V U-OUTmax (abnormal) Connection wires length 0. C5e Mains current harmonics. at 85 °C TC (90 % survival rate) Compliant with relevant EU directives ENEC. acc. acc. to EN 61547 Performance requirements. More information at: www.helvar.c.90 • Suitable for outdoor use IP65 • Double insulated enclosure 17 Connections Alternative parallel connection Home Prev In (+) L N E Next I2 (-) I1 Itot = 350 / 700 / 1400 mA Ifv Ifv = I1 + I2 + .. acc to EN 62384 I-OUT P-out (max) U-OUT λ η @ max 350 mA 31.9 General and safety requirements EN 61347-1 Particular safety requirements for d. at full load.2013 1/1 17 .90 V 0.3 m Maximum driver to LED wire length 5 m Weight 490 g IP rating IP65 Load Output Conformity & Standards Output current (I-OUT) 350 / 700 / 1400 mA Max output power 63 W Efficiency.25 .04. or a.5% Note: Not suitable for load side switching operation.c. typical 0. to EN 55015 Immunity standard.9 1400 mA 58. to EN 61347-2-13 Thermal protection class EN61347. acc.264 VAC Max mains current at full load 0.0.97 0.86 700 mA 63 W 35 . + In = 350 / 700 / 1400 mA +/. supplied electronic controlgear for LED modules. 50-60 Hz • Maximum 63 W load • Short circuit protection • Open circuit protection • Protected up to 4 kV power network fast transients • High efficiency > 0.. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker.5 W 60 . acc to EN 61000-3-3 Radio Frequency Interference.90 V 0.com 17.98 0.34 A Frequency 50 . at 75 °C TC 30 000 h.9 Operating Conditions and Characteristics Max.8 W 35 . CE & SELV marked Note: See page 23 for dimensions(no.OL1x60-E-CC 1x60 W Constant Current LED driver • Selectable constant current output: 350 / 700 / 1400 mA 60 W 220-240 VAC.94c 0. Mains Characteristics Connections and Mechanical Data Voltage range 198 . acc. 9) Helvar | Data is subject to change without notice.42 V 0.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time: 85 °C -30…+60 °C -40…+80 °C 100 % 50 000 h. 3 m Maximum driver to LED wire length 5m Weight 750 g IP rating IP65 Load Output Conformity & Standards Output current (I-OUT) 700 / 1050 mA Max output power 105 W Efficiency.60 Hz 144 V U-OUTmax (abnormal) Connection wires length 0. typical ≥ 0.04.2013 1/1 . to EN 61547 Performance requirements.. acc to EN 61000-3-3 Radio Frequency Interference. acc.264 VAC Max mains current at full load 0. C5e Mains current harmonics. acc.. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker. More information at: www. 10) 18 Helvar | Data is subject to change without notice. acc.120 V 0. at 75 °C TC 30 000 h. at full load. to EN 55015 Immunity standard.44 .helvar.OL1x100-E-CC1 1x100 W Constant Current LED driver • Selectable constant current output: 700 / 1050 mA 100 W 220-240 VAC. + In = 700 / 1050 mA +/.98 0.91 1050 mA 105 W 70 .58 A Frequency 50 . 50-60 Hz • Maximum 105 W load • Short circuit protection • Open circuit protection • Protected up to 4 kV power network fast transients • High efficiency > 0.com 17. supplied electronic controlgear for LED modules.98 0.c.100 V 0.5% Note: Not suitable for load side switching operation. to EN 61347-2-13 Thermal protection class EN61347. at 85 °C TC (90 % survival rate) Compliant with relevant EU directives ENEC & CE marked Note: See page 22 for dimensions (no.91 General and safety requirements EN 61347-1 Particular safety requirements for d.91 Operating Conditions and Characteristics Max.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time: 85 °C -30…+60 °C -40…+80 °C 100 % 50 000 h. acc.91 • Suitable for outdoor use IP65 • Double insulated enclosure 18 Connections Alternative parallel connection Home In (+) L N E Prev I2 Next (-) Itot = 700 / 1050 mA I1 Ifv Ifv = I1 + I2 + .0. Mains Characteristics Connections and Mechanical Data Voltage range 198 . acc to EN 62384 I-OUT P-out (max) U-OUT λ η @ max 700 mA 84 W 70 . or a.c. More information at: www.90 Operating Conditions and Characteristics Max. acc to EN 61000-3-3 Radio Frequency Interference.3 m Maximum driver to LED wire length 5m Weight 750 g IP rating IP65 Load Output Conformity & Standards Output current (I-OUT) 1400 / 2100 mA Max output power 101 W Efficiency. or a.5% Note: Not suitable for load side switching operation.72 V 0. at full load.48 V 0. acc. 10) Helvar | Data is subject to change without notice. at 85 °C TC (90 % survival rate) Compliant with relevant EU directives ENEC & CE marked Note: See page 22 for dimensions (no. acc.91 2100 mA 101 W 30 .helvar.264 VAC Max mains current at full load 0. to EN 55015 Immunity standard. typical ≥ 0. Mains Characteristics Connections and Mechanical Data Voltage range 198 .. + In = 1400 / 2100 mA +/.. acc. 50-60 Hz • Maximum 101 W load • Short circuit protection • Open circuit protection • Protected up to 4 kV power network fast transients • High efficiency > 0.com 17.91 • Suitable for outdoor use IP65 • Double insulated enclosure 18 Connections Home Alternative parallel connection Prev In (+) L N E Next I2 (-) Itot = 1400 / 2100 mA I1 Ifv Ifv = I1 + I2 + .44 .04.60 Hz 92 V U-OUTmax (abnormal) Connection wires length 0.c. to EN 61347-2-13 Thermal protection class EN61347. to EN 61547 Performance requirements. acc.0.58 A Frequency 50 .c.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time: 85 °C -30…+60 °C -40…+80 °C 100 % 50 000 h.2013 1/1 19 .98 0. C5e Mains current harmonics. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker. supplied electronic controlgear for LED modules. acc to EN 62384 I-OUT P-out (max) U-OUT λ η @ max 1400 mA 101 W 30 .98 0.OL1x100-E-CC2 1x100 W Constant Current LED driver • Selectable constant current output: 1400 / 2100 mA 100 W 220-240 VAC. at 75 °C TC 30 000 h.91 General and safety requirements EN 61347-1 Particular safety requirements for d. LED driver earthing • LED drivers are designed to support different luminaire classifications. 20 Helvar | Data is subject to change without notice. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. • For Helvar LED drivers to have a reliable operation and EMC performance. In order to have safe and reliable LED driver operation. Please check the individual LED driver type for its exact safety class rating. IEC/EN 60598-1). • Please refer to datasheets connections & mechanical data Wire connections • Type-C MCB’s with trip characteristics in according to EN 60898 are recommended. the LED luminaires will need to comply with the relevant standards and regulations (e. The strain relief provides reliable fastening method for the mains and LED output wiring. like Class I or Class II fittings (no earth required). via a strain relief.helvar.04.LED wiring & connectivity LED Helvar have a range of LED drivers suited for either in-built and independent luminaire usage.g.2013 1/2 Next . Please refer to page 102 for the exact maximum number of LED drivers per MCB. the luminaires are expected to have an earth connection. Specifications of the LED drivers may never exceed the operating conditions as per the product datasheets. The LED luminaire shall be designed to adequately protect the LED drivers from dust. More information at: www. • Switch-Control and DALI controls may not be connected simultaneously. • For more accurate Switch-Control operational information please refer to page 35 (EB section) • When using a SELV-rated LED driver. Prev Miniature Circuit Breakers (MCB) • The general preferred installation position of LED drivers is to have the top cover facing upwards. then the SELV driver output has to be insulated from the luminaire earth connection (ref. moisture and pollution.com L N Switch-Control T22 015 1A 17. Home • Please refer to datasheets connections diagram • Ensure that the LED driver does not exceed temperature higher than specified on the product datasheets. Wiring considerations Installation & operational considerations Wire type and cross section Maximum tc temperature • Please refer to datasheets connections & mechanical data • Reliable operation and lifetime is only guaranteed if the maximum tc point temperature is not exceeded under the conditions of use. Wiring insulation • According to recommendations in EN 60598 Maximum wire lengths Strain Relief for independent use • Some of the Helvar LED drivers allow use both inside the luminaire and outside the luminaire. EN60598-1 luminaire standard). This feature provides basic On/Off and Up/Down dimming functionality through a standard momentary switch. Switch-Control • The Helvar DALI dimmable LED drivers feature Switch-Control. LL1x70 and LL2x35 driver platforms feature an adjustable constant current output. please refer to the enclosed tables below. • An external resistor can be inserted in to the current setting terminal. Home LL1x70. then the LED drivers will operate at their default lowest current level.helvar. allowing the user to adjust the LED driver output current. More information at: www.com T22 015 1A 17. then please handle carefully to avoid damaging the component (see picture right).04. To achieve the most accurate output current it is recommended to select a quality low tolerance resistor. • A standard through-hole resistor can be used for the current setting. • When no external resistor is connected. • When bending the external resistor.Current setting resistor The Helvar LL1x40.& LL2x35R (Ω) Iout (mA) 0 Prev 1k 1k2 1k5 1k8 2k2 2k7 3k3 3k9 4k7 5k6 6k8 8k2 10k 12k 15k 22k 27k 33k 39k 47k 56k 68k 82k 100k 150k 330k 1M ∞ 700 650 640 630 620 610 600 580 570 550 530 520 500 480 470 450 430 420 410 400 390 385 380 375 370 365 360 355 350 Helvar | Data is subject to change without notice.2013 2/2 Next 21 . • For the resistor / current value selection. 5 36.5 67 106 103 93.2 2 21.5 46.2 57.5 168 225 T22 014 1A 17.04.helvar. More information at: www.Dimensions 25. 100 118 165 184 3 4 Home 4.com 36.5 30 6 28 With strain relief (LL1x40-SR) 184 22 Helvar | Data is subject to change without notice.5 Next 4.2 Prev 57.5 127 5 130 119 76 66.2 1 110 175 40 40 4 4.2013 1/2 . 4 4. LC1x30-E-AN (+ LC1x30-SR) LC50-U-DX3 6 7 8 9 10 LL1x40-E-CC. LL2x35-E-DA OL1x60-E-CC OL1x100-E-CC1. LC1x30-E-AN LC1x30-E-CC. LL1x40-E-DA (+ LL1x40-SR) LL1x70-E-CC.04. LL1x70-E-DA LL2x35-E-CC. LC1x30-E-DA. LL1x20-E-DA LC1x30-E-CC. LC1x30-E-DA.7 8 21 Home Prev 370 35 Next 380 9 300 ± 20 35 53 300 ± 20 125 137 149 10 300 ± 20 35 53 300 ± 20 210 220 234 1 2 3 4 5 LL6-U-CC LL20-U-CC.2013 2/2 23 .com T22 014 1A 17.helvar. OL1x100-E-CC2 Helvar | Data is subject to change without notice. More information at: www. helvar. More information at: www.helvar.LED driver accessories LED LC1x30-SR • Easy to assemble click-on strain relief for LC1x30 series • Allows independent driver usage • Screws for internal cable clamps included • Cable clamps allowing different cable thicknesses LL1x40-SR Home • Easy to assemble click-on strain relief for LL1x40 series • Allows independent driver usage Prev • Screws for internal cable clamps included • Cable clamps allowing different cable thicknesses • Each pack includes 2 x strain reliefs LC50-PR • USB to DMX programming dongle for the LC50-U-DX3 • Configuring the LED driver parameters • Setting the LED driver DMX start address • Helvar DMX LED configurator Software downloadable from: www.com/downloads/tools For more information please see Technical note LED-TN-005 “LC50-U-DX3 Operational & Configuration information” 24 Helvar | Data is subject to change without notice.com Next . More information at: www.Home Prev Next Helvar | Data is subject to change without notice.helvar.com 25 . freedom in lighting electronic Ballasts One of the first companies to develop and manufacture electronic ballasts. Helvar’s history in these products extends back to the early 1980s. The tables below show lamp categories where ballast combinations are found. Home Prev Next For HID lamps For compact lamps For T8 lamps For T5 lamps Page Digital DALI electronic ballasts EL-iDim 28 30 31 - EL-iDim-c 32 - 32 - Analogue controllable electronic ballasts EL-sc 38 40 41 - Standard electronic Ballasts EL-s 48 53 61 - EL-su 50 53 61 - EL-ngn - 52 - - EL-ngn5 46 - 55 - EL-es - 54 - - EL-TCs 57 57 55 - - - - 66 EP-h 26 Helvar | Data is subject to change without notice. More information at: www. offering a comprehensive range of innovative electronic ballasts covering all relevant applications with T5.com . T8 and compact fluorescent lamps. Since that time. Helvar has remained at the forefront.helvar. Optimum Cathode Control The proven OCCTM . EL-iDim / EL-iDim-c DALI ballasts are also fully compatible with Helvar iDim sensors. guaranteeing the highest possible: EEI = A1 BAT • Remarkable low stand-by power • Smooth and stepless dimming from 100 % to 1 % • Multi-lamp operation.Optimum Cathode Control technology used in Helvar EL-s. This can be very useful in large installations where the lighting management and maintenance is centralized in one monitoring room. EL-iDim and EL-TCs electronic ballast ranges. The achieved energy saving is considerable compared to existing ballasts on the market. Home Prev Next OCCTM . and maintenance costs are always kept to a minimum. OCCTM ensures that the electrical parameters supplied to the lamp are always optimum. EL-sc. minimising system losses and maximising lamp lifetime. the combination creating the latest high-tech innovation available to the lighting market. mains voltage. allowing one ballast to drive all HE-T5 lamps • Multi-lamp operation between several compact lamps • EL-iDim-c ballast are suitable for use both in single and twin lamp operation • The ballasts also have an in-built data register capable of storing information on running hours. Helvar | Data is subject to change without notice. With out-of-box functionality. customer input played a crucial role – leading to superior features such as: • OCC technology.helvar.com 27 . More information at: www. easy to install and use. lamp voltage etc. they offer the important advantage of enabling everything to be achieved with the same ballasts. In the design of EL-iDim / EL-iDim-c. the Helvar system is moreover.DALI electronic ballasts EL-iDim / EL-iDim-c DALI ballasts are designed for a broad range of applications from the smallest intelligent luminaires to major lighting installations in large building complexes. energy consumption. What’s more. 38-0.22-0.5 82.23-0.7 20.3 W • Dimming range 1-100 % *) • Only 21 mm high • Microprocessor controlled • Standard & sidemount possibilities • User friendly.12-0.29-0.7 13.27 0.5 46 25.21 0.10 0.45 0.07 0.26 0.11-0.28-0. quick release connectors A1 BAT Lamp type Wattage No.08-0.03.22-0.49-0.3 49.5 22.5 27.7 13.com T07 111 1F 26.3 53.7 34.5 50.14 0.53-0.5 47.18 0.2013 1/2 Home Prev Next .36 0.7 20.30 0.27-0.70 (W) 13.20 0.5 62 23. * Dimming range 3-100 % for EL3x14iDim & EL4x14iDim Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 360 30 21 350 2 430 30 21 420 d c a b d Ballast EL1 x iDim EL2 x iDim EL3 x iDim EL4 x iDim Delivery information Transportation package Unit package Minimum Plastic EUR pallet Pallet Pallet delivery binding 1200 x 800 weight height amount strip (pcs.5 42.15-0.49 0.20-0.18-0.5 32 62 39 73.35 for connection diagrams and additional characteristics.14 0.8 53.20 0.7 13.8 80 80 Note: See pages 33.25-0. of lamps 14 14 14 14 21 21 24 24 28 28 35 35 39 39 49 49 54 54 80 80 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 T5 Ballast EL1x14-35iDim EL2x14-35iDim EL3x14iDim EL4x14iDim EL1x14-35iDim EL2x14-35iDim EL1x24iDim EL2x24iDim EL1x14-35iDim EL2x14-35iDim EL1x14-35iDim EL2x14-35iDim EL1x39iDim EL2x39iDim EL1x49iDim EL2x49iDim EL1x54iDim EL2x54iDim EL1x80iDim EL2x80iDim EEI Dimensions Connection A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT 1 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 (p.7 22.5 59 117 86 170 (A) 0.17 0.25 0.8 27. 50-60 Hz • Digital DALI control • Switch-Control • Stand-by consumption 0.helvar.10 0. More information at: www.78-0.33) 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Weight Circuit power Mains current Lamp power (g) 250 330 310 330 250 330 250 330 250 330 250 330 250 330 250 330 250 330 250 365 (W) 17 32.15-0.8 34.35 0.36-0.5 55 107.7 38 38 49.39-0.23 0.) (kg) (cm) 10 980 300 40 840 325 43 10 840 325 43 10 840 325 43 10 Right to use German patent DE19757295 of Tridonic Atco 28 Helvar | Data is subject to change without notice.EL-iDim Digital DALI electronic ballasts for T5 fluorescent lamps 14-80 W 220-240 V. 30 0.8 80 80 Home Prev Next Note: See pages 33.18-0.10 0. 4) Current controlled products.23 0.5 62 23.5 47.7 49.5 32 62 39 73.3 53.03.25 0.07 0.5 50.20 0.12-0.14 0.27-0.22-0.) (kg) (cm) 10 980 300 40 840 325 43 10 840 325 43 10 840 325 43 10 Right to use German patent DE19757295 of Tridonic Atco Helvar | Data is subject to change without notice.49 0. 50-60 Hz • Digital DALI control • Switch-Control • Stand-by consumption 0.14 0.7 20.53-0.3 49.21 0.45 0.EL-iDim Digital DALI electronic ballasts for T5-eco fluorescent lamps 14-80 W 220-240 V. More information at: www.11-0.35 for connection diagrams and additional characteristics.8 34.5 55 107.15-0.5 46 25.15-0.7 13. quick release connectors A1 BAT Lamp type T5 eco Wattage No.27 0.39-0.28-0.2013 2/2 29 .70 (W) 13.7 20.5 22.7 22.25-0. maximum 10 % energy saving achieved from declared maximum value.10 0.17 0. no energy saving when ecolamps are used.helvar.26 0. depending on lamp types.23-0.7 13.7 13. Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 360 30 21 350 2 430 30 21 420 d c a b d Ballast EL1 x iDim EL2 x iDim EL3 x iDim EL4 x iDim Delivery information Transportation package Unit package Minimum Plastic EUR pallet Pallet Pallet delivery binding 1200 x 800 weight height amount strip (pcs. Lamps are running over powered.36-0.36 0.8 53.5 27.49-0.78-0.20 0.5 59 117 86 170 (A) 0.com T07 111 1F 26.7 34.29-0. 1) Dimming range 3-100 % for EL3x14iDim & EL4x14iDim 2) Maximum values at 100 % dimming level 3) Powercontrolled products. of lamps 14 eco 14 eco 14 eco 14 eco 21 eco 21 eco 24 eco 24 eco 28 eco 28 eco 35 eco 35 eco 49 eco 49 eco 54 eco 54 eco 80 eco 80 eco 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Ballast EL1x14-35iDim 4) EL2x14-35iDim 4) EL3x14iDim 1) 4) EL4x14iDim 1) 4) EL1x14-35iDim 4) EL2x14-35iDim 4) EL1x24iDim 3) EL2x24iDim 3) EL1x14-35iDim 4) EL2x14-35iDim 4) EL1x14-35iDim 4) EL2x14-35iDim 4) EL1x49iDim 3) EL2x49iDim 3) EL1x54iDim 3) EL2x54iDim 3) EL1x80iDim 3) EL2x80iDim 3) EEI A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT Dimensions Connection (p.08-0.22-0.8 27.3 W • Dimming range 1-100 % 1) • Only 21 mm high • Microprocessor controlled • Standard & sidemount possibilities • User friendly.33) 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Weight Circuit power 2) Mains current 2) Lamp power 2) (g) 250 330 310 330 250 330 250 330 250 330 250 330 250 330 250 330 250 365 (W) 17 32. 30 32 Note: See pages 33.33) (g) T8 36 1 EL1x36iDim A1 BAT 1 1 250 (W) (A) (W) 35.03.5 0.17-0.15 32 36 2 EL2x36iDim A1 BAT 2 2 330 70.helvar. of lamps Ballast EEI Dimensions Connection Weight Circuit power Mains current Lamp power (p.2011 1/1 .3 W • Dimming range 1-100 % • Only 21 mm high • Microprocessor controlled • Standard & sidemount possibilities • User friendly. More information at: www.5 0. 50-60 Hz • Digital DALI control • Switch-Control • Stand-by consumption 0.) 980 840 (kg) 300 325 (cm) 40 43 Right to use German patent DE19757295 of Tridonic Atco 30 Helvar | Data is subject to change without notice.32-0.com T07 112 1B 07. quick release connectors A1 BAT Lamp type Wattage No.EL-iDim Digital DALI electronic ballasts for T8 fluorescent lamps 36 W 220-240 V.35 for connection diagrams and additional characteristics. Home Prev Next Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 360 30 21 350 d 2 c 430 30 21 420 a b d Delivery information Ballast Unit package Minimum delivery amount EL1 x iDim EL2 x iDim 10 10 Plastic binding strip Transportation package EUR pallet 1200 x 800 Pallet weight Pallet height (pcs. 17-0.50 0.EL-iDim Digital DALI electronic ballasts for compact fluorescent lamps 24 .5 0. More information at: www.30 0.com T07 113 1D 12.3 56 35.36 0.2012 1/1 31 .33) (g) (W) (A) (W) 24 24 1 2 EL1x24iDim EL2x24iDim A1 BAT A1 BAT 1 2 1 2 250 330 25. *) Dimming range 3-100 % Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 360 30 21 350 d 2 c 430 30 21 420 a b d Delivery information Ballast Unit package Minimum delivery amount EL1 x iDim EL2 x iDim 10 10 Plastic binding strip Transportation package EUR pallet 1200 x 800 Pallet weight Pallet height (pcs.25 0.) 980 840 (kg) 300 325 (cm) 40 43 Right to use German patent DE19757295 of Tridonic Atco Helvar | Data is subject to change without notice.5 26 1 EL1x14-35iDim * A1 BAT 1 1 250 29.03.5 70.12-0.5 86 170 0.39-0.helvar.78-0. 50-60 Hz • Digital DALI control • Switch-Control • Stand-by consumption 0.13 0.25 0.25 0.70 26 26 26 32 32 55 55 80 80 Home Prev Next Note: See pages 33.13 26 26 28 28 36 36 55 55 80 80 2 1 2 1 2 1 2 1 2 EL2x14-35iDim * EL1x14-35iDim * EL2x14-35iDim * EL1x36iDim EL2x36iDim EL1x55iDim EL2x55iDim EL1x80iDim EL2x80iDim A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT 2 1 2 1 2 1 2 1 2 2 1 2 1 2 1 2 1 2 330 250 330 250 330 250 330 250 365 56 29.5 50. quick release connectors A1 BAT Lamp type TC-L Wattage No.27-0.5 22.5 119.10 0.3 W • Dimming range 1-100 % • Only 21 mm high • Microprocessor controlled • Standard & sidemount possibilities • User friendly. of lamps Ballast EEI Dimensions Connection Weight Circuit power Mains current Lamp power (p.80 W 220-240 V.15 0.21 22.32-0.3 0.55-0.35 for connection diagrams and additional characteristics.5 59.23-0. 12 0.3 W • Dimming range 3-100 % • Multilamp operation • Single and twin lamp operation A1 BAT Lamp type TC-L/ TC-F T5c TC-DE/ TC-TE Wattage No.5 Delivery information Ballast EL-iDim-c Unit package Transportation package Minimum delivery amount Carton Box Pallet 820 x 1280 Pallet weight Pallet height 10 40 (pcs.5 16.0 'd' (mm) 100.5 43 56 Note: See pages 33.0 ‘f’ (mm) 111.16 0.) 800 (kg) 148 (cm) 48 Right to use German patent DE19757295 of Tridonic Atco 32 Helvar | Data is subject to change without notice.16 0. 50-60 Hz • Digital DALI control • Switch-Control • Stand-by consumption 0.com T07 120 1F 13. 1) Tested and recommended by Helvar.17 0.5 23 23.13 0.helvar.25 0.5 25 31 32 41.5 26 50 26 44.35 for connection diagrams and additional characteristics.20 0.5 ‘e’ (mm) 65.2012 1/1 Home Prev Next .27 (W) 16 16 22 22 22 40 16.02.42 0.5 46 93 61 (A) 0.5 20 38 28 56 56 35 70.25 0.EL-iDim-c Digital DALI electronic ballasts for compact fluorescent lamps 18 .09 0. of lamps 18 18 24 24 22 40 18 18 26 26 26 32 32 42 42 57 1 2 1 2 1 1 1 2 1 2 2 1 2 1 2 1 Ballast EEI EL1/2x18/24iDim-c EL1/2x18/24iDim-c EL1/2x18/24iDim-c EL1/2x18/24iDim-c EL1/2x18/24iDim-c EL1/2x18/24iDim-c EL1/2x18iDim-c EL1/2x18iDim-c EL1/2x26-42iDim-c EL1/2x26-42iDim-c EL2x26-42iDim-c EL1/2x26-42iDim-c EL2x26-42iDim-c EL1/2x26-42iDim-c EL2x26-42iDim-c EL1/2x26-42iDim-c 1)2) Dimensions Connection A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT A1 BAT 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 123x79x28 (p.42 W 220-240 V. not ENEC approved 2) UIN > 220 V.0 Width 'b' (mm) 79. Ta > 18 °C Dimensions Length 'a' (mm) 123.23 0.33) 5 6 5 6 5 5 5 6 5 6 7 5 7 5 7 5 Weight Circuit power Mains current Lamp power (g) 155 155 155 155 155 155 155 155 155 155 176 155 176 155 176 155 (W) 18 35. More information at: www.32 0.12 0.09 0.0 ‘g’ (mm) 25.2 0.0 Height 'c' (mm) 28. iDim 4 EL4x ..iDim-c 7 EL2x.com T07 114F 24.iDim 2 EL2x ....08......helvar.iDim 5 EL1/2x...iDim-c 6 EL1/2x.. More information at: www..iDim-c Right to use German patent DE19757295 of Tridonic Atco Helvar | Data is subject to change without notice.Connection diagrams EL-iDim NOTE: All wiring to the connectors marked with a red dot (hot wires) should be as short as possible.2012 1/2 33 ..iDim 3 EL3x . 1 5 SWITCHCONTROL SWITCHCONTROL 2 6 SWITCHCONTROL 3 Home SWITCHCONTROL Prev Next SWITCHCONTROL 4 7 SWITCHCONTROL SWITCHCONTROL 1 EL1x . 4 mA 400 V ~1 yes 0. typical 1. 6) For EL2x80iDim. at tc 2)4) 1 m / 1 m (hot / cold) 4) Home 1. EL4x14iDim and EL1/2x18/24iDim-c ballasts in ambient temperatures below 15 OC it is not recommended to dim the light level below 10 % to ensure stable lamp operation. typical Earth leakage current Maximum working voltage (Uout) ~1 yes 0. acc. to EN60081 / EN60901 *) Mains current harmonics. acc. 5) When using EL3x14iDim. C5e Tested and proven compatible with DALI V1 (IEC62386.helvar. More information at: www.4 s O Next Standards EL-iDim EL-iDim-c General and safety requirements EN61347-2-3 Additional safety requirements for AC/DC supplied ballasts acc. 1h > 0. 1h N/A 176-280 VDC 320 VAC. at tc Max length of ballast to lamp wiring 1. acc. EBLF > 0. 2009) * EN 60081 for T5 & T8 fluorescent lamps. steady state Programmable light output for DC operation Power factor (at maximum). to EN61347-2-3 Annex J Performance requirements EN60929 Preheat starting Lamp life acc.5 m / 2 m (hot / cold) Ignition time.96 < 0.08.2012 2/2 . it is not recommended to dim the light below 5 % in temperatures below 15 OC 7) EL2x26-42iDim-c. tc = 65 OC 4) Minimise lamp wire length variations in order to avoid imbalance in light output.temperature at tc point 75 °C 3) 75 °C Ambient temperature range +10…+50 °C 1) 5) 6) +10…+50 °C 5) Storage temperature range Maximum relative humidity Number of starts per lamp AC Range DC range (starting voltage >198VDC) Over voltage duration EBLF (Emergency Ballast Lumen Factor) -40…+80 °C no condensation > 50 000 198-264 VAC -40…+80 °C no condensation > 50 000 198-264 VAC 176-280 VDC 320 VAC.0 s 8) Preheat (warm start) Prev 1) To ensure stable operation of TC-L lamps in ambient temperatures below 18 C it is not recommended to dim the light level below 3 % 2) For TC-L lamps 1 m / 2 m (hot/cold lamp wires) 3) For EL 3x14iDim.Characteristics EL-iDim EL-iDim-c Max. EN 60901 for compact fluorescent lamps 34 Helvar | Data is subject to change without notice.com T07 114 1F 24.to EN61547 Vibration test EN60068-2-64 test Fh Bump test EN60068-2-29 test Eb Thermal protection class EN61347.5 7) BLF (Ballast Lumen Factor).3 8) EL1/2x18/24iDim-c ignition time = 1.96 < 0. to EN55015 Immunity standard. to EN61000-3-2 Radio Frequency Interference.4 mA 400 V Lifetime (90 % survival) 50 000 h.0 s Type of starting Preheat (warm start) 50 000 h. 2012 1/1 35 .200 m.4 second) • Switch off: • Switch on: Short push of the switch ( < 0.5 second) • If lamps are off. then a short push (all lamps off).25 s) Between the switches. 275 V) diagram B • Ballasts per switch: 50 (observe above) • Ensure all ballasts and associated switches are connected to the same mains phase Operation: Short push of the switch ( < 0. Deactivation • Deactivation is started with the light switched OFF (standby) using the following sequence. Switch-Control and DALI can not be connected to the iDim ballast at the same time. EL-iDim / EL-iDim-c ballasts Switch-Control provides ON/OFF switching and UP/DOWN dimming functionality from one or more simple switches.Switch-Control Information. • 1 x long switch (20 .360 ms) • 1 x long switch (20 .4 second) • EL-iDim ballasts will switch on to the last set level • Dimming: Long push of the switch ( > 0. Right to use German patent DE19757295 of Tridonic Atco Helvar | Data is subject to change without notice. More information at: www. then switch on B) 25-200 m Home Prev Next 1µF Compatibility: Some ballasts manufacturers have functionality similar to Helvar SwitchControl. the ballast dims up from minimum • If lamps are on.360 ms) • 1 x long switch (20 . diagram A 25 . or… • Long push (until all lamps are on).25 s) • 3 x short switch (90 . Connection • To the DALI input A) 0-25 m Suitable switch: • Automatic return type • Mains rated Connection: • EL-iDim ballasts: To the DALI input • Wire length: 25 m maximum.com O07 116 1C 1. approximately 2 seconds of delay is allowed.12. use a capacitor (1 µF.helvar. approximately 2 seconds of delay is allowed. • 1 x long switch (20 . These methods are NOT COMPATIBLE with each other.25 s) Between the switches. the ballast dims in the opposite direction to previously • The first dimming direction is dimming down Correction of out of sequence operation: • Switch the mains supply off and on. Power On to last level operation sequence: Activation • Activation is started with the light switched ON using the following sequence.25 s) • 3 x short switch (90 . Power On to last level function from Switch-Control Power On to last level function recalls the light level after mains break. More information at: www.Home Prev Next 36 Helvar | Data is subject to change without notice.helvar.com . com Prev Next . 37 Helvar | Data is subject to change without notice. minimising system losses and maximising lamp lifetime. microprocessor-controlled EL-sc ballasts offer significant performance advantages over other solutions. EL-sc. offer the most efficient energy-saving solutions for commercial lighting. Home The fully electronic.Optimum Cathode Control technology used in Helvar EL-s. More information at: www. EL-iDim and EL-TCs electronic ballast ranges. This dimming method is unique in that both control methods can be used simultaneously. OCCTM .freedom in lighting EL-sc – the analogue solution These controllable ballasts. the EL-sc range has a multi-control feature allowing for dimming either by an analogue 1-10 VDC signal or by a contact closure (Switch-Control). OCCTM ensures that the electrical parameters supplied to the lamp are always optimum.helvar. utilising the well established 1-10 VDC analogue control. especially with regard to energy efficiency. The achieved energy saving is considerable compared to existing ballasts on the market.Optimum Cathode Control The proven OCCTM . lighting quality and comfort. In addition. offering a high degree of flexibility in lighting design. 40-0.3 53.13-0.22-0.29-0.7 38 38 49.42) 1 2 3 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 Weight Circuit power Mains current Lamp power (g) 270 340 340 270 340 270 340 270 340 270 340 270 340 270 340 270 340 270 (W) 17 31 62 24 46 26 50 31 64 39 78 42 83 55 106 61 118 88 (A) 0.50-0.17 0.46 0.20 0. 50-60 Hz • Switch-Control / Analogue control 1) • Only 21 mm high • Standard & sidemount possibilities • Dimming range 1-100 % 2) • Microprocessor controlled • User friendly. quick release connectors • Low energy consumption • Stabilised.49 0.07 0.23 0.25-0.7 13.38 (W) 13.5 22.28-0.8 80 Note: See pages 42-43 for connection diagrams and additional characteristics.30-0. 1) Simultaneous lighting control by Switch-Control and Analogue control 2) Dimming range 3-100 % for EL 4x14sc Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 360 30 21 350 d 2 430 30 21 420 c a b d Ballast EL1 x sc EL2 x sc EL4 x sc 38 Delivery information Transportation package Unit package Minimum Plastic EUR pallet Pallet Pallet delivery binding 1200 x 800 weight height amount strip (pcs.10 0.03. of lamps 14 14 14 21 21 24 24 28 28 35 35 39 39 49 49 54 54 80 1 2 4 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 Ballast EEI EL1x14sc EL2x14sc EL4x14sc 2) EL1x21sc EL2x21sc EL1x24sc EL2x24sc EL1x28sc EL2x28sc EL1x35sc EL2x35sc EL1x39sc EL2x39sc EL1x49sc EL2x49sc EL1x54sc EL2x54sc EL1x80sc A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 Dimensions Connection 1 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 (p.5 27.36 0.18 0.53-0.EL-sc Controllable (1-10 V) electronic ballasts for T5 fluorescent lamps 14-80 W 220-240 V.3 49.14 0.20 0.15-0.15-0.8 27.helvar.2013 1/2 Home Prev Next .24-0.27 0. flickerfree light output A1 Lamp type T5 Wattage No.18-0.7 13.20-0.36-0.7 34.) (kg) (cm) 10 10 10 980 840 840 300 325 325 40 43 43 Helvar | Data is subject to change without notice.com T07 107 1D 26.26 0.7 22.7 20.28 0.08-0.11-0.8 53.34 0.7 20. More information at: www.14 0.41-0.12 0.8 34. 8 27.13-0.10 0.36-0.22-0.14 0.25-0.7 20.20 0.2013 2/2 39 .34 0. 50-60 Hz • Switch-Control / Analogue control 1) • Only 21 mm high • Standard & sidemount possibilities • Dimming range 1-100 % 2) • Microprocessor controlled • User friendly.3 49. Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 360 30 21 350 d 2 430 30 21 420 c a b d Ballast EL1 x sc EL2 x sc EL4 x sc Delivery information Transportation package Unit package Minimum Plastic EUR pallet Pallet Pallet delivery binding 1200 x 800 weight height amount strip (pcs. no energy saving when ecolamps are used.03.46 0.27 0.28-0.50-0.7 13. Lamps are running over powered.7 34.) (kg) (cm) 10 10 10 980 840 840 300 325 325 40 43 43 Helvar | Data is subject to change without notice.23 0.18-0.8 34. flickerfree light output A1 Lamp type T5 eco Wattage No.helvar.EL-sc Controllable (1-10 V) electronic ballasts for T5-eco fluorescent lamps 14-80 W 220-240 V.07 0.7 22.com T07 107 1D 26.5 22.42) 1 2 3 1 2 1 2 1 2 1 2 1 2 1 2 1 1 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 (g) 270 340 340 270 340 270 340 270 340 270 340 270 340 270 340 270 Circuit power Mains current Lamp power 3) (W) 17 31 62 24 46 26 50 31 64 39 78 55 106 61 118 88 (A) 0.8 53.14 0.15-0.41-0.15-0.30-0.28 0.3 53.11-0. 1) Simultaneous lighting control by Switch-Control and Analogue control 2) Dimming range 3-100 % for EL 4x14sc 3) Powercontrolled products. More information at: www.12 0.5 27.49 0.7 20.08-0.7 49.24-0.17 0. quick release connectors • Low energy consumption • Stabilised.29-0.26 0.38 (W) 13.7 13.20 0.53-0. of lamps 14 eco 14 eco 14 eco 21 eco 21 eco 24 eco 24 eco 28 eco 28 eco 35 eco 35 eco 49 eco 49 eco 54 eco 54 eco 80 eco 1 2 4 1 2 1 2 1 2 1 2 1 2 1 2 1 Ballast EEI EL1x14sc EL2x14sc EL4x14sc 2) EL1x21sc EL2x21sc EL1x24sc EL2x24sc EL1x28sc EL2x28sc EL1x35sc EL2x35sc EL1x49sc EL2x49sc EL1x54sc EL2x54sc EL1x80sc A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 Dimensions Connection Weight (p.8 80 Home Prev Next Note: See pages 42-43 for connection diagrams and additional characteristics. EL-sc Controllable (1-10 V) electronic ballasts for T8 fluorescent lamps 18-70 W 220-240 V, 50-60 Hz • Switch-Control / Analogue control 1) • Only 21 mm high • Standard & sidemount possibilities • Dimming range 1-100 % 2) • Microprocessor controlled • User friendly, quick release connectors • Low energy consumption • Flickerless light A1 Lamp type T8 Wattage No. of lamps Ballast EEI 18 Dimensions Connection Weight Circuit power Mains current Lamp power 1 EL1x18sc A1 1 (p.42) (g) 1 270 (W) (A) (W) 19 0.09-0.08 16 18 2 EL2x18sc A1 2 2 340 37 0.18-0.15 16 18 4 EL4x18sc 2) A1 2 3 340 72 0.33-0.30 16 36 1 EL1x36sc A1 1 1 270 37 0.17-0.16 32 36 2 EL2x36sc A1 2 2 340 71 0.33-0.30 32 58 1 EL1x58sc A1 1 1 270 55 0.27-0.26 50 58 2 EL2x58sc A1 2 2 340 108 0.50-0.46 50 70 1 EL1x70sc A1 1 1 270 65 0.31-0.27 60 Note: See pages 42-43 for connection diagrams and additional characteristics. 1) Simultaneous lighting control by Switch-Control and Analogue control 2) Dimming range 3-100 % for 4x18sc Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 360 30 21 350 d 2 c 430 30 21 420 a b d Ballast EL1 x sc EL2 x sc EL4 x sc 40 Delivery information Transportation package Unit package Minimum Plastic EUR pallet Pallet Pallet delivery binding 1200 x 800 weight height amount strip (pcs.) (kg) (cm) 10 10 10 980 840 840 300 325 325 40 43 43 Helvar | Data is subject to change without notice. More information at: www.helvar.com T07 108 1A 15.2.2010 1/1 Home Prev Next Switch-Control information, EL-sc ballasts Switch-Control provides ON/OFF switching and UP/DOWN dimming functionality from one or more simple switches. Switch-Control can be used together and simultaneously with other compatible control devices. • EL-sc ballasts and analogue 1-10 V control. Suitable switch: • Automatic return type. Mains rated (Mains is still present at the ballast terminals if the lamps are switched off from Switch-Control). • The switch should withstand a short circuit current of: - 0.2 mA per ballast Connection: • Between the Switch-Control input and N (or L). • Wire length: 200 m maximum. • Ballasts per switch: 50 (observe above). • Ensure all ballasts and associated switches are connected to the same mains phase. Home Operation: • Switch off: Short push of the switch (<0.4 second). • Switch on: Short push of the switch (<0.4 second). • Re-strike within 3 seconds of switch off is prevented to ensure optimal lamp warm start. • EL-sc ballasts will switch on to the analogue control set level. • Dimming: Long push of the switch (>0.5 second). • If lamps are off, the ballast dims up from minimum. • If lamps are on, the ballast dims in the opposite direction to previously. The first dimming direction is dimming down. Prev Next Regaining analogue control when Switch-Control is active: • Dim the analogue control device from min. to max. and back to minimum within 1 second. Correction of out of sequence operation: • Switch the mains supply off and on, or… • Long push (until all lamps are on), then a short push (all lamps off), then wait 3 seconds and switch on (short push). Compatibility: Some ballasts manufacturers have functionality similar to Helvar Switch-Control. In most cases these methods are NOT COMPATIBLE with each other. Connection Between the Switch-Control input (pin1) and L (or N). Helvar | Data is subject to change without notice. More information at: www.helvar.com O07 115 1B 31.10.2013 1/1 43 Connection diagrams EL-sc NOTE: All wiring to the connectors marked with a red dot (hot wires) should be as short as possible. 1 2 SWITCH-CONTROL* SWITCH-CONTROL* 1-10 VDC control < 1mA 1-10 VDC control < 1mA 3 SWITCH-CONTROL* 1-10 VDC control < 1mA * Connection between the Switch-Control input (pin1) and L (or N). 1 EL1x ...sc 2 EL2x ...sc 3 EL4x ...sc Prev Characteristics EL-sc Max.temperature at tc point 80 °C Ambient temperature range +10…+50 °C 1) Storage temperature range -40…+80 °C Maximum relative humidity no condensation Next Number of starts per lamp > 50 000 AC Range DC range (starting voltage >190VDC) 198-264 VAC 176-280 VDC Over voltage duration 320 VAC, 1 h Power factor (at maximum), typical 0.98 Earth leakage current < 0.4 mA Maximum working voltage (Uout) 400 V Lifetime (90 % survival) 50 000 h, at 70 °C tc Max length of ballast to lamp wiring 1.5 m/2 m (hot/cold)2) Ignition time, typical <1.3 s 1) To ensure stable operation of TC-L lamps in ambient temperatures below 18OC it is not recommended to dim the light level below 3 % 2) For TC-L lamps 1 m/2 m (hot/cold lamp wires) Standards EL-sc General and safety requirements EN61347-2-3 Performance requirements EN60929 Preheat starting Lamp life acc. to EN60081 / EN60901 *) Mains current harmonics, acc. to EN61000-3-2 Radio Frequency Interference, acc. to EN55015 Immunity standard, acc.to EN61547 Vibration test EN60068-2-64 test Fh Bump test EN60068-2-29 test Eb Thermal protection class EN61347, C5e * EN 60081 for T5 & T8 fluorescent lamps, EN 60901 for compact fluorescent lamps 42 Home Helvar | Data is subject to change without notice. More information at: www.helvar.com T07 110 1E 26.03.2013 1/1 • Dimming: Long push of the switch (>0. • EL-sc ballasts and analogue 1-10 V control. • Switch on: Short push of the switch (<0. • If lamps are off. the ballast dims in the opposite direction to previously. then a short push (all lamps off). • EL-sc ballasts will switch on to the analogue control set level.4 second). then wait 3 seconds and switch on (short push). the ballast dims up from minimum.2. Switch-Control can be used together and simultaneously with other compatible control devices.2 mA per ballast Connection: • Between the Switch-Control input and N (or L). EL-sc ballasts Switch-Control provides ON/OFF switching and UP/DOWN dimming functionality from one or more simple switches.com O07 115 1A 10. to max. • Ballasts per switch: 50 (observe above).0. Mains rated (Mains is still present at the ballast terminals if the lamps are switched off from Switch-Control). • Re-strike within 3 seconds of switch off is prevented to ensure optimal lamp warm start. or… • Long push (until all lamps are on). Compatibility: Some ballasts manufacturers have functionality similar to Helvar Switch-Control. Helvar | Data is subject to change without notice. • The switch should withstand a short circuit current of: .2010 1/1 43 . • Ensure all ballasts and associated switches are connected to the same mains phase. and back to minimum within 1 second. Prev Next Regaining analogue control when Switch-Control is active: • Dim the analogue control device from min.Switch-Control information. • Wire length: 200 m maximum. Connection Between the Switch-Control input (pin1) and L (or N). Correction of out of sequence operation: • Switch the mains supply off and on. • If lamps are on. More information at: www.5 second).4 second).helvar. In most cases these methods are NOT COMPATIBLE with each other. • The first dimming direction is dimming up. Suitable switch: • Automatic return type. Home Operation: • Switch off: Short push of the switch (<0. and combines this with quality design and extensive testing under the harshest conditions. This offers major advantages in reduced logistics and transportation costs. resulting in the highest energy savings and highest reliability. Among the latest of these are the EL-ngn5 standard ballasts. More information at: www. 44 EL-ngn5 – setting new standards Helvar has once again set a new standard for T5 high performance electronic ballasts with EL-ngn5 range. The superior safety and EMC performance make them suitable for use in protection class II fittings. its multi-lamp operation feature enables one ballast to drive all HE‑T5 lamps in an installation. Moreover.com Home Prev Next .freedom in lighting Standard electronic ballasts – highest energy savings and reliability Continuous research and development in new technologies has led to the introduction of a host of innovative products over the years.helvar. and embodying Helvar’s ‘green values’ that help to guarantee minimum environmental impact! Helvar uses only the highest-quality components and materials in the manufacture of its ballasts. These ballasts are characterized by excellent thermal design. This offers a great possibilities for luminaire designers in designing sleek T5 luminaires without compronises. Helvar | Data is subject to change without notice. It’s hardly surprising then that failure rates are among the lowest in the market. as well as contributing to reduced CO2 emissions. Its single lamp versions up to 54 W has a length of only 190 mm with a height of 21 mm. exceeding industrial expectations 10-fold! Helvar’s manufacturing processes are also certified to ISO 9001 and ISO14001. It is also possible to drive a combination of T5/TC-L lamps with one ballast. TC-L. Helvar | Data is subject to change without notice.EL-ngn – the Next GeNeration EL-s – many imitators. T5c. 2. TC-DD. Its multi-lamp operation feature enables one ballast to drive all HE‑T5 lamps in an installation. yet it is still capable of running cool even under full thermal stress. More information at: www. Home The EL-ngn is available for T8 lamps in 1-. TC-SE. and its green credentials are confirmed by the fact that it has the highest Energy Efficiency Index.and 4-lamp configurations. It is developed to meet the needs of luminaire designers looking to replace magnetic ballasts with an electronic version combining the benefits of both! EL-TCs range is capable of driving as many as 50 lamps in various TC-DE. thanks to its OCC technology and the clever thermal design of its PCB. TC-TE.and twin.helvar.com 45 .lamp versions into one ballast. TC-F. This feature has been praised by many OEMs and it is widely acknowledged to be the most reliable CFL ballast in the market. Prev EL-es – the eco saver EL-TCs – the cool runner The EL-es is a electronic ballast range for high-volume T8 markets from Helvar. the EL-TCs is surprisingly small. PLR. Its nocompromise design offers the highest specifications. and its proven reliability means that it is widely accepted by even the most demanding and quality-conscious OEMs. with a height of only 21 mm. Next What’s more. It is also possible to drive a combination of T8/TC-L and T5/TC-L lamps with one ballast. T8 and T5 lamp combinations! The beauty of the ballasts is their ‘dual-technology’ that cost-effectively combines both single. The feature was so much appreciated by the OEMs that it’s been copied by all Helvar’s competitors and has become an industry standard. It was also the first slim-line ballast in the market. few equals The EL-ngn is a high specification electronic ballast range for high-volume T8 markets from Helvar. It is also considered to be one of the most user-friendly ballasts.and 4-lamp configurations. The EL-es is available for T8 lamps in 2. EL-s is a high-performance ballast meeting the market requirements. 45 0.30 0.2013 1/2 Home Prev Next .7 20.16-0.7 38 38 49. 50-60 Hz • Smallest available quality ballast • Standard & sidemount possibilities • Optimal lamp operation • Low power losses • Long lifetime • Green values • High power factor A2 BAT Lamp type T5 Wattage No.34-0.7 13.3 53.22-0.19 0.62) 1 14 7 8 8 1 14 1 9 7 8 1 14 1 14 1 9 1 14 1 9 1 14 Weight Circuit power Mains current Lamp power (g) 127 204 204 204 190 127 204 130 193 208 208 127 204 127 204 130 195 130 211 130 206 192 300 (W) 15.24-0.16 0.18 0.53-0.31 0.12-0.11 0.48 0.44-0. Dimensions Lenght 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 190 30 21 180 2 280 30 21 270 3 360 30 21 350 d c a b d Delivery information Ballast Unit package Transportation package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.8 53.15-0.26 0. More information at: www.3 49.5 22.08-0.24 0.19-0.helvar.5 27.19 0.7 22.26 0.7 13.7 34.12 0.EL-ngn5 Electronic ballasts for T5 fluorescent lamps 14-80 W 220-240 V.30-0.50-0.com T07 127 1A 20.) (kg) (cm) EL1 x ngn5 10 2000 260-300 48 2000 400-450 56 EL2 x ngn5 & EL3/4 x ngn5 10 1500 400-420 56 EL2x55ngn5 & EL2x80ngn5 10 46 Helvar | Data is subject to change without notice.5 22.7 13.5 22.29-0.03.8 27.29-0.40 0.7 20.21 0.42-0.8 80 80 Note: See pages 62-64 for connection diagrams and additional characteristics.7 13.5 31 46 62 63 23 45 25 49 73 97 30 60 38 75 42 81 55 105 58 115 86 170 (A) 0.06 0.35-0.32 0.26-0.18-0. of lamps 14 14 14 14 14 21 21 24 24 24 24 28 28 35 35 39 39 49 49 54 54 80 80 1 2 3 4 4 1 2 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 Ballast EEI EL1x14-35ngn5 EL2x14-35ngn5 EL3/4x14ngn5 EL3/4x14ngn5 EL4x14ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x24ngn5 EL2x24ngn5 EL3/4x24ngn5 EL3/4x24ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x39/36ngn5 EL2x39/36ngn5 EL1x49ngn5 EL2x49ngn5 EL1x54ngn5 EL2x54ngn5 EL1x80ngn5 EL2x80ngn5 A2 BAT A2 BAT A2 A2 A2 A2 BAT A2 BAT A2 A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT Dimensions Connection 1 2 2 2 2 1 2 1 2 2 2 1 2 1 2 1 2 1 2 1 2 2 3 (p.36 0.25 0.15 0.10 0.22-0.73 (W) 13.23 0.12-0.8 34.25-0.36-0.80-0. 25-0.36-0.40 0.19 0.80-0.19-0.7 13.22-0.25 0.5 22. of lamps 1 2 3 4 1 2 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 Ballast EEI EL1x14-35ngn5 EL2x14-35ngn5 EL3/4x14ngn5 EL3/4x14ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x24ngn5 EL2x24ngn5 EL3/4x24ngn5 EL3/4x24ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x39/36ngn5 EL2x39/36ngn5 EL1x49ngn5 EL2x49ngn5 EL1x54ngn5 EL2x54ngn5 EL1x80ngn5 EL2x80ngn5 A2 BAT A2 BAT A2 A2 A2 BAT A2 BAT A2 A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT Dimensions Connection 1 2 2 2 1 2 1 2 2 2 1 2 1 2 1 2 1 2 1 2 2 3 (p.24 0.3 49.15-0.53-0.26 0.48 0. Dimensions Lenght 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 190 30 21 180 2 280 30 21 270 3 360 30 21 350 d c a b d Delivery information Ballast Unit package Transportation package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.18-0.29-0. More information at: www.50-0.8 53.35-0.11 0.16 0.8 34.helvar.62) 1 14 7 8 1 14 1 9 7 8 1 14 1 14 1 9 1 14 1 9 1 14 Weight Circuit power 1) Mains current 1) Lamp power 1) (g) 127 204 204 204 127 204 130 193 208 208 127 204 127 204 130 195 130 211 130 206 192 300 (W) 15.26-0.7 34.3 53.18 0.5 22.7 13.22-0.24-0.12-0.30 0.36 0.7 20. 50-60 Hz • Smallest available quality ballast • Standard & sidemount possibilities • Optimal lamp operation • Low power losses • Long lifetime • Green values • High power factor A2 BAT Lamp type T5 eco 14 eco 14 eco 14 eco 14 eco 21 eco 21 eco 24 eco 24 eco 24 eco 24 eco 28 eco 28 eco 35 eco 35 eco 39 eco 39 eco 49 eco 49 eco 54 eco 54 eco 80 eco 80 eco No.5 22.31 0.7 22.44-0.15 0.12-0.16-0.5 31 46 62 23 45 25 49 73 97 30 60 38 75 42 81 55 105 58 115 86 170 (A) 0.7 13.42-0.2013 2/2 47 .8 80 80 Home Prev Next Note: See pages 62-64 for connection diagrams and additional characteristics.06 0.) (kg) (cm) EL1 x ngn5 10 2000 260-300 48 2000 400-450 56 EL2 x ngn5 & EL3/4 x ngn5 10 1500 400-420 56 EL2x55ngn5 & EL2x80ngn5 10 Helvar | Data is subject to change without notice.29-0.5 27.EL-ngn5 Electronic ballasts for T5-eco fluorescent lamps 14-80 W 220-240 V.21 0.45 0.com T07 127 1A 20.8 27.08-0. 1) Maximum 10 % energy saving achieved from declared maximum value depending on difference in lamps from various manufacturers.7 38 38 49.10 0.23 0.12 0.32 0.34-0.03.7 20.73 (W) 13.19 0. 26-0.48 0.07 0.420 57 1500 395 57 EL2 x s 10 1500 390 57 EL3/4 x s 10 48 Helvar | Data is subject to change without notice.8 34.50-0.03.29-0.5 31 46 62 23 45 25 49 30 60 38 75 42 81 52.18 0.21 0.19-0.2012 1/4 Home Prev Next .3 53.7 13.5 85 (A) 0.7 13.8 27.25 0.12-0.40-0.31 0.26 0.7 20.29-0.7 38 38 49.18-0.12-0.45 0.7 13.19 0.11 0. More information at: www.24 0.19 0.EL-s Electronic ballasts for T5 fluorescent lamps 14-80 W 220-240 V.08-0.3 49.23 0.com T07 103 1C 12.32 0.15-0. Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 280 30 21 270 2 360 30 21 350 d c a b d Delivery information Ballast Transportation package Unit package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.36 (W) 13.7 34.53-0.25-0.35-0.7 22.8 53.8 80 Note: See pages 62-63 for connection diagrams and additional characteristics.helvar.5 22.24-0.15-0.22-0.12 0.10 0.7 20.5 27.36-0.13 0.16 0. of lamps 14 14 14 14 21 21 24 24 28 28 35 35 39 39 49 49 54 54 80 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 Ballast EEI Dimensions Connection Weight Circuit power Mains current Lamp power EL1x14-35s EL2x14-35s EL3/4x14s EL3/4x14s EL1x14-35s EL2x14-35s EL1x24s EL2x24s EL1x14-35s EL2x14-35s EL1x14-35s EL2x14-35s EL1x39/36s EL2x39/36s EL1x49s EL2x49s EL1x54s EL2x54s EL1x80s A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 1 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 (p. 50-60 Hz • Only 21 mm high • Optimal lamp operation • Wide operational ambient temperature range • Standard & sidemount possibilities • Low power losses • Silent operation • Stabilised flickerfree light • High power factor A2 Lamp type T5 Wattage No.62) 1 3 5 6 1 3 1 2 1 3 1 3 1 2 1 3 1 2 1 (g) 175 250 250 250 175 250 190 230 175 250 175 250 190 245 190 260 200 260 200 (W) 15.22-0.5 104 58 114.) (kg) (cm) EL1 x s 10 2000 350 . 2-30.6 43.17 0.4 43.16-0.40 0.4-108.46-0.5-34.3-13.12 0.8-48 94-100.3-57.4 11.3-52 48.24-0.2-54 105.com T07 103 1C 12.03.3 52.8-43 52.7 46.1-13.3-52 70.31-0.7 19.5 39.7 17.32 (W) 11.19-0.6 28.2 32.3-37.15 0.21-0.8-72.17 0.62) 1 3 5 6 1 3 1 2 1 3 1 3 1 3 1 2 1 (g) 175 250 250 250 175 250 190 230 175 250 175 250 190 260 200 260 200 (W) 13-15 29.25 0.4 12. 50-60 Hz • Only 21 mm high • Optimal lamp operation • Wide operational ambient temperature range • Standard & sidemount possibilities • Low power losses • Silent operation • Stabilised flickerfree light • High power factor A2 Lamp type T5 eco No.12 0.420 57 1500 395 57 EL2 x s 10 1500 390 57 EL3/4 x s 10 Helvar | Data is subject to change without notice.19 0.EL-s Electronic ballasts for T5-eco fluorescent lamps 14-80 W 220-240 V.23 0.6 57.13-0.3 38.3-13. More information at: www.45 0.) (kg) (cm) EL1 x s 10 2000 350 .7 17.3 25.4-47.4 48.10 0.20 0.4 19.4-47.5 21.25-0.4 70.4 35.5-75. 1) Depending on difference in lamps from various manufacturers Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 280 30 21 270 2 360 30 21 350 d c a b d Delivery information Ballast Transportation package Unit package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.7 12.06 0.6 Home Prev Next Note: See pages 62-63 for connection diagrams and additional characteristics.43-0.2012 2/4 49 .helvar.22 0.09 0. of lamps 14 eco 14 eco 14 eco 14 eco 21 eco 21 eco 24 eco 24 eco 28 eco 28 eco 35 eco 35 eco 49 eco 49 eco 54 eco 54 eco 80 eco 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 1 Ballast EEI Dimensions Connection Weight Circuit power 1) Mains current 1) Lamp power 1) EL1x14-35s EL2x14-35s EL3/4x14s EL3/4x14s EL1x14-35s EL2x14-35s EL1x24s EL2x24s EL1x14-35s EL2x14-35s EL1x14-35s EL2x14-35s EL1x49s EL2x49s EL1x54s EL2x54s EL1x80s A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 1 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 (p.1-13.30 0.8 26.5 74.34-0.3 32.3 19.5-34.8-80 (A) 0.3 43.08-0. More information at: www.5 104 170 (A) 0.7 20.62) 1 4 7 8 1 4 7 8 1 4 1 4 1 4 4 Weight Circuit power Mains current Lamp power (g) 175 250 210 210 175 250 215 215 175 250 175 250 190 260 305 (W) 15.50-0. 50-60 Hz A2 Lamp type T5 Wattage No.12-0.2012 3/4 Home Prev Next .18-0.5 31 46 62 23 45 73 97 30 60 38 75 52.7 22.com T07 103 1C 12.25 0.) (kg) (cm) EL1 x s-u 10 2000 350 .73 (W) 13.15-0.15-0.7 13.7 13.8 34.22-0.23 0.80-0.34-0.12 0. Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 280 30 21 270 2 360 30 21 350 d c a b d Delivery information Ballast Transportation package Unit package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.5 22.07 0.7 20.420 57 1500 395 57 EL2 x s-u 10 1500 390 57 EL3/4 x s-u 10 50 Helvar | Data is subject to change without notice.03.EL-su Electronic ballasts for T5 fluorescent lamps • Only 21 mm high • Optimal lamp operation • Wide operational ambient temperature range • Standard & sidemount possibilities • With terminals for both manual and automatic wiring (IDC & push-in) • Low power losses • Silent operation • Stabilized flickerfree light • High power factor 14-80 W 220-240 V.16 0.3 49.26 0.35-0.31 0.45 0.29-0.40 0.19 0.30 0.7 34.22-0.5 27.10 0.7 13.7 49.08-0.3 80 Note: See pages 62-63 for connection diagrams and additional characteristics.44-0.19 0. of lamps 14 14 14 14 21 21 24 24 28 28 35 35 49 49 80 1 2 3 4 1 2 3 4 1 2 1 2 1 2 2 Ballast EL1x14-35s-u EL2x14-35s-u EL3/4x14s-u EL3/4x14s-u EL1x14-35s-u EL2x14-35s-u EL3/4x24s-u EL3/4x24s-u EL1x14-35s-u EL2x14-35s-u EL1x14-35s-u EL2x14-35s-u EL1x49s-u EL2x49s-u EL2x80s-u EEI Dimensions Connection A2 A2 A2 A2 A2 A2 A2 BAT A2 BAT A2 A2 A2 A2 A2 A2 A2 BAT 1 2 1 1 1 2 1 1 1 2 1 2 1 2 2 (p.25-0.29-0.8 27.helvar.13 0. 31-0.3 38.3 43.75 25.3-37.5 64.08-0.12 0.21-0. of lamps 14 eco 14 eco 14 eco 14 eco 21 eco 21 eco 24 eco 24 eco 28 eco 28 eco 35 eco 35 eco 49 eco 49 eco 80 eco 1 2 3 4 1 2 3 4 1 2 1 2 1 2 2 Ballast EL1x14-35s-u EL2x14-35s-u EL3/4x14s-u EL3/4x14s-u EL1x14-35s-u EL2x14-35s-u EL3/4x24s-u EL3/4x24s-u EL1x14-35s-u EL2x14-35s-u EL1x14-35s-u EL2x14-35s-u EL1x49s-u EL2x49s-u EL2x80s-u EEI Dimensions Connection Weight Circuit power 1) Mains current 1) Lamp power 1) A2 A2 A2 A2 A2 A2 A2 BAT A2 BAT A2 A2 A2 A2 A2 A2 A2 BAT 1 2 1 1 1 2 1 1 1 2 1 2 1 2 2 (p.7 46.4 12. Dimensions Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 280 30 21 270 2 360 30 21 350 d c a b d Delivery information Ballast Transportation package Unit package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs. 50-60 Hz A2 Lamp type T5 eco No.13-0.4 19.2-76.43-0.16-0.2-30.06 0.2 Home Prev Next 1) Depending on difference in lamps from various manufacturers Note: See pages 62-63 for connection diagrams and additional characteristics.3 151.com T07 103 1C 12.6 57.7 19.7 17.7 17.20 0.helvar.4 35.5-34.28 0.) (kg) (cm) EL1 x s-u 10 2000 350 .30 0.62) 1 4 7 8 1 4 7 8 1 4 1 4 1 4 4 (g) 175 250 210 210 175 250 215 215 175 250 175 250 190 260 305 (W) 13-15 29.17 0.3 32.3 85 28.2 32.03.4 19.5-34.23 0.7 12.4 11.40 0.4-47.12 0.25-0.17 0.1-13.09 0.15 0.3-13.420 57 1500 395 57 EL2 x s-u 10 1500 390 57 EL3/4 x s-u 10 Helvar | Data is subject to change without notice.4-47.2012 4/4 51 .EL-su Electronic ballasts for T5-eco fluorescent lamps • Only 21 mm high • Optimal lamp operation • Wide operational ambient temperature range • Standard & sidemount possibilities • With terminals for both manual and automatic wiring (IDC & push-in) • Low power losses • Silent operation • Stabilized flickerfree light • High power factor 14-80 W 220-240 V.65 (W) 11.8-161 (A) 0.19-0.25 0.4 71.8-72.5 39.8 26.3-13.1-13. More information at: www.70-0.8-43 52.37 0.3-57.4 43.8-48 94-100.4 70. ) (kg) (cm) EL1 x ngn 10 1600 330 60 1600 320-360 60 EL2 x ngn 10 1500 385 57 EL3/4x18ngn 10 1600 370 60 EL4 x ngn 10 52 a c a b d b Helvar | Data is subject to change without notice.15 16 A2 2 7 210 52 0.29 32 58 1 EL1x58ngn A2 1 1 193 55 0.23 16 EL3/4x18ngn A2 2 8 210 69 0. Dimensions drawing Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 a 280 30 28 270 2 b 280 30 21 270 Delivery information Ballast Unit package Transportation package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.23 50 58 2 EL2x58ngn A2 1 9 218 108 0.09-0.16-0.30 16 4 EL4x18ngn A2 1 10 200 72 0.50-0. More information at: www.16-0.25-0. of lamps Ballast EEI Dimensions 18 1 EL1x18ngn A2 1 18 2 EL2x18ngn A2 18 3 EL3/4x18ngn 18 4 18 Connection Weight Circuit power Mains current Lamp power (p.26-0.62) (g) 1 190 (W) (A) (W) 19 0.03.33-0.helvar.33-0.com d c a b d T07 104 1D 01.15 32 36 2 EL2x36ngn A2 1 9 205 71 0.EL-ngn Electronic ballasts for T8 fluorescent lamps 18-58 W 220-240 V.08 16 1 9 200 37 0. 50-60 Hz • Energy saving • Warm Start according to lamp standards • Flickerless light • Covers EMC requirements • Low harmonics • Low power losses • Stabilized output A2 Lamp type T8 Wattage No.45 50 Home Prev Next Note: See pages 62-63 for connection diagrams and additional characteristics.2013 1/2 .32-0.30 16 36 1 EL1x36ngn A2 1 1 191 36 0. 54 60 2) 2) Home Prev Next Note: See pages 62-63 for connection diagrams and additional characteristics.30 16 32 1 EL1x49s 1) A2 1 1 190 34.16-0.28 60 70 2 EL2x70s A2 2 2 260 128 0.31 32 36 1 EL1x36/40/18s A2 1 1 190 35 0.50-0.15 32 36 1 EL1x36/40s-u A2 3 1 190 35 0.29 32 58 1 EL1x58s A2 1 1 200 54 0.08 (W) 16 18 2 EL2x18s A2 2 2 230 34.5 0.03.5 0.25-0. EL-su Electronic ballasts for T8 fluorescent lamps 18-70 W 220-240 V.09-0.15 16 18 3 EL3/4x18s A2 2 5 250 52 0.30-0.32-0.25-0.33-0.23 16 18 4 EL3/4x18s A2 2 6 250 69 0.23 50 58 2 EL2x58s A2 2 2 260 106.com d c a b d T07 104 1D 01.helvar.5 0.23 16 18 3 EL3/4x18s-u 2) A2 3 7 210 52 0.23 50 58 1 EL1x58s-u 2) A2 3 1 200 54 0.16-0.45 50 58 2 EL2x58s-u A2 4 4 260 106.29 32 36 2 EL2x36/40s-u 2) A2 4 4 245 69 0.2013 2/2 53 .15 32 32 2 EL2x49s 1) A2 2 3 260 72 0.EL-s.59-0.62) 1 (g) 190 (W) 18 (A) 0.420 57 1500 395 57 EL2 x s 10 1500 385 57 EL3/4 x s 10 a d c a b d b Helvar | Data is subject to change without notice. of lamps Ballast EEI Dimensions Connection Weight Circuit power Mains current Lamp power 18 1 EL1x18s A2 1 (p. 50-60 Hz • Only 21 mm high • Optimal lamp operation • Wide operational ambient temperature range • Standard & sidemount possibilities • Optional terminals for automatic wiring • Low power losses • Silent operation • Stabilized flickerfree light • High power factor A2 Lamp type T8 Wattage No.5 0.26-0.33-0. not ENEC approved 2) With terminals for both manual and automatic wiring (IDC & push-in) Dimensions drawing Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 a 280 30 21 270 2 a 360 30 21 350 3 b 280 30 21 270 4 b 360 30 21 350 Delivery information Ballast Unit package Transportation package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.45 50 70 1 EL1x70s A2 1 1 200 64. More information at: www.50-0.32-0.16-0.5 0.15 32 36 2 EL2x36/40s A2 2 2 245 69 0.) (kg) (cm) EL1 x s 10 2000 350 .30 16 18 4 EL3/4x18s-u 2) A2 3 8 210 69 0.26-0. 1) Tested and recommended by Helvar. 30-0.45 50 Home Prev Note: See pages 62-63 for connection diagrams and additional characteristics.EL-es Electronic ballasts for T8 fluorescent lamps • Energy saver 18-58 W 220-240 V.) (kg) (cm) EL4x18es 10 1600 330 60 1600 330 60 EL2x36es 10 1600 350 60 EL2x58es 10 54 Helvar | Data is subject to change without notice.33 16 36 2 EL2x36es A2 9 190 71 0.29 32 58 2 EL2x58es A2 9 200 108 0. Next Dimensions drawing Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 a 280 30 28 270 a c a b d Delivery information Ballast Unit package Transportation package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.32-0. 50-60 Hz • Stabilized flickerfree light • Approved warm start • High power factor • Silent operation • Good EMC performance A2 Lamp type T8 Wattage No.helvar.10. of lamps Ballast EEI Connection Weight Circuit power Mains current Lamp power (p. More information at: www.62) (g) (W) (A) (W) 18 4 EL4x18es A2 10 190 72 0.2012 .50-0.com T07 122 1B 03. ) (kg) (cm) 10 2000 260-300 48 2000 400-450 56 10 1500 400-420 56 10 Helvar | Data is subject to change without notice.29 0.08.42-0.2013 1/1 55 .helvar.24 0.36 0.40 0.5 22.com T07 126 1A 13.32-0.54-0.21 0. 1) Also ENEC approved for 55 W T5-C lamps Dimensions Lenght 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 190 30 21 180 2 280 30 21 270 3 360 30 21 350 d c a b d Delivery information Ballast EL1 x ngn5 EL2 x ngn5 & EL3/4 x ngn5 EL2x55ngn5 & EL2x80ngn5 Transportation package Unit package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.34-0.16-0.62) 1 9 7 8 1 9 1 9 1 14 (g) 130 193 208 208 130 195 195 240 192 300 (W) 25 49 73 97 35 69 60 118 86 170 (A) 0.5 32 32 55 55 80 80 Home Prev Next Note: See pages 62-64 for connection diagrams and additional characteristics.24-0.49 0.30 0.44-0.5 22.5 22.15 0.80-0. More information at: www.73 (W) 22.11 0. 50-60 Hz • Smallest available quality ballast • Standard & sidemount possibilities • Optimal lamp operation • Low power losses • Long lifetime • Green values • High power factor A2 BAT Lamp type TC-L Wattage No.12-0.28-0. of lamps 24 24 24 24 36 36 55 55 80 80 1 2 3 4 1 2 1 2 1 2 Ballast EL1x24ngn5 EL2x24ngn5 EL3/4x24ngn5 EL3/4x24ngn5 EL1x39/36ngn5 EL2x39/36ngn5 EL1x55ngn5 1) EL2x55ngn5 EL1x80ngn5 EL2x80ngn5 EEI Dimensions Connection Weight Circuit power Mains current Lamp power A2 A2 BAT A2 BAT A2 BAT A2 A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT 1 2 2 2 1 2 2 3 2 3 (p.EL-ngn5 Electronic ballasts for compact fluorescent lamps 14-80 W 220-240 V. 98 0.08 0.14 0.95 0.94c 0.14 0.03.96 0. 1) Tested and recommended by Helvar.14 0.98 0.08 0.95 0.12 0.08 0.8 23 23 22. not ENEC approved 2) Light output 93 % Dimensions Length 'a' (mm) 103.97 0.8 14.96 0.8 23 23 22.32 0. More information at: www.08 0.EL-TCs Electronic ballasts for compact fluorescent lamps 10-40 W 220-240 V.96 0.96 0.8 14.12 0.5 Delivery information Ballast Unit package Transportation package Pallet Pallet Pallet Minimum Carton Box 820x1280 weight height delivery amount (pcs.8 14.2013 1/6 Home Prev Next .32 0. of lamps 18 18 18 24 24 24 36 36 36 36 40 40 18 18 18 24 24 24 36 36 36 1 1 2 1 1 2 1 1 1 2 1 1 1 1 2 1 1 2 1 1 2 Ballast EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL1/2x36/38TCs EL1x18-42TCs 1)2) EL1/2x18-42TCs 1)2) EL1/2x36/38TCs EL1/2x18-42TCs 1) EL1x18-42TCs EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL1/2x36/38TCs EL1/2x18-42TCs 1)2) EL1/2x36/38TCs EEI Connection Weight Circuit power Mains current Power factor Lamp power A2 A2 A2 A2 A2 A2 A2 BAT A2 A2 A2 BAT A2 A2 A2 A2 A2 A2 A2 A2 A2 BAT A2 A2 BAT (p.) (kg) (cm) EL-TCs 60 1800 260 105 56 Helvar | Data is subject to change without notice.12 0.3 34 28 33 Note: See pages 62-63 for connection diagrams and additional characteristics.5 ‘f’ (mm) 93.97 0.97 0.95 0.3 34 28 28 33 39 39 14.19 0.12 0.98 0.14 0.96 0.95 0.97 (W) 14.com T07 105 1F 20.62) 11 13 12 11 13 12 11 13 12 12 11 13 11 13 12 11 13 12 11 12 12 (g) 132 125 132 132 125 132 132 125 132 132 132 125 132 125 132 132 125 132 132 132 132 (W) 17 17 32 26 26 48 37 31 31 72 42 42 17 17 32 26 26 48 37 31 72 (A) 0.5 ‘g’ (mm) 25.8 14.21 0.5 ‘e’ (mm) 57.94c 0. 50-60 Hz • Slim.94c 0. only 28 mm high • Multilamp operation • Single and twin lamp operation • Low power losses • Single case size A2 Lamp type TC-L TC-F Wattage No.98 0.19 0.21 0.17 0.helvar.5 Width 'b' (mm) 67 Height 'c' (mm) 28 'd' (mm) 83.94c 0.14 0.17 0. 5 ‘e’ (mm) 57.05 0.12 0.0 15 22. 1) Tested and recommended by Helvar.62) 11 11 11 11 11 12 11 13 11 11 11 11 11 11 11 13 12 11 13 12 (g) 118 118 132 132 132 132 132 125 132 125 118 118 118 132 118 110 118 118 110 118 (W) 12 17 25 29 38 74 25 25 41 41 16 22. 50-60 Hz • Slim.5 ‘g’ (mm) 25.0 34.EL-TCs Electronic ballasts for compact fluorescent lamps 10-40 W 220-240 V.10 0.3 27.11 0.03.5 12.6 8.2013 2/6 57 .97 0.7 21 28.9c 0.5 8.6 38. not ENEC approved Dimensions Length 'a' (mm) 103.8 34 22.12 0.9c 0.32 0.95 0.08 0.97 0.8 12.5 ‘f’ (mm) 93.2 26.6 14.13 0.5 Delivery information Ballast Unit package Transportation package Pallet Pallet Pallet Minimum Carton Box 820x1280 weight height delivery amount (pcs.97 0.17 0.98 0.19 0.5 8.95 0.95 0.14 0.) (kg) (cm) EL-TCs 60 1800 260 105 Helvar | Data is subject to change without notice.12 0.98 0.19 0.97 0.07 0.6 22.05 0.93c 0.5 Width 'b' (mm) 67 Height 'c' (mm) 28 'd' (mm) 83.25 0.08 0.96 0.5 31 57.97 0.8 12.07 0.98 (W) 10.96 0. only 28 mm high • Multilamp operation • Single and twin lamp operation • Low power losses • Single case size A2 Lamp type TC-DD T5c T5 T8 TC-SE Wattage No. of lamps 10 16 21 28 38 38 22 22 40 40 14 21 28 30 9 9 9 11 11 11 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 2 1 1 2 Ballast EL1/2x9-13TCs EL1/2x9-13TCs EL1/2x18-42TCs 1) EL1/2x18-42TCs EL1/2x36/38TCs EL1/2x36/38TCs EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL1x18-42TCs EL1/2x9-13TCs 1) EL1/2x9-13TCs 1) EL1/2x9-13TCs 1) EL2x32/42TCs 1) EL1/2x9-13TCs EL1x9-13TCs EL1/2x9-13TCs EL1/2x9-13TCs EL1x9-13TCs EL1/2x9-13TCs EEI Connection Weight Circuit power Mains current Power factor Lamp power A2 A2 A2 A2 A2 BAT A2 BAT A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 (p.95 0.9 Home Prev Next Note: See pages 62-63 for connection diagrams and additional characteristics.com T07 105 1F 20.07 0.helvar.93c 0.97 0.91c 0.05 0. More information at: www.6 38.5 10 10 18 14 14 27 (A) 0. 5 19.EL-TCs Electronic ballasts for compact fluorescent lamps 9-26 W 220-240 V.) (kg) (cm) EL-TCs 60 1800 260 105 58 Helvar | Data is subject to change without notice.96 0.9 8. More information at: www.8 13.96 0.5 16.3 18.6 1) Ballast Lumen Factor for 1x14 W.9 24.09 0.9 8.92c 0.97 0.1 0. of lamps 10 10 10 13 13 13 18 18 18 26 26 26 26 14 14 14 17 17 17 1 1 2 1 1 2 1 1 2 1 1 2 2 1 1 2 1 1 2 Ballast EL1/2x9-13TCs EL1x9-13TCs EL1/2x9-13TCs EL1/2x9-13TCs EL1x9-13TCs EL1/2x9-13TCs EL1/2x18TCs EL1x18TCs EL1/2x18TCs EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL2x32/42TCs EL1/2x14/17TCs 1) EL1x14/17TCs 1) EL1/2x14/17TCs 1) EL1/2x14/17TCs 1) EL1x14/17TCs 1) EL1/2x14/17TCs EEI Connection Weight Circuit power Mains current Power factor Lamp power A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT A2 BAT (p.23 0.98 0.9 16.96 0.9c 0.09 0.93c 0.5 Width 'b' (mm) 67 Height 'c' (mm) 28 'd' (mm) 83.62) 11 13 12 11 13 12 11 13 12 11 13 12 12 11 13 12 11 13 12 (g) 118 110 118 118 110 118 120 113 120 132 125 132 132 131 126 131 131 126 131 (W) 10 10 20 15 15 28 19 19 36 27 27 51 53 18 18 34 21.2013 3/6 Home Prev Next .97 0.96 0.15 0.1 0.08 0.13 0.09 0.07 0.8 13.05 0.13 0.92c 0.5 ‘g’ (mm) 25.18 0.8 24 15.9 16.13 0.9c 0.93c 0. Dimensions Length 'a' (mm) 103.08 0.8 15.7 24.5 Delivery information Ballast Unit package Transportation package Pallet Pallet Pallet Minimum Carton Box 820x1280 weight height delivery amount (pcs.5 21.5 41 (A) 0.96 0.5 ‘e’ (mm) 57.98 0.3 19.9 13.8 15.24 0.16 0. 2x14 W.com T07 105 1F 20.5 ‘f’ (mm) 93.94c 0.05 0.96 (W) 8.helvar.7 23.07 0.94c 0. 50-60 Hz • Slim only 28 mm high • Multilamp operation • Single and twin lamp operation • Low power losses • Single case size A2 Lamp type TC-DE PL-R Wattage No.03. 1x17 W: 107 % Note: See pages 62-63 for connection diagrams and additional characteristics.98 0. 16 0.2 0. More information at: www. of lamps 13 13 13 18 18 18 26 26 26 26 32 32 32 42 42 42 57 57 1 1 2 1 1 2 1 1 2 2 1 1 2 1 1 2 1 1 Ballast EEI Connection Weight Circuit power Mains current Power factor Lamp power EL1/2x9-13TCs EL1x9-13TCs EL1/2x9-13TCs EL1/2x18TCs EL1x18TCs EL1/2x18TCs EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL2x32/42TCs EL1/2x18-42TCs EL1x18-42TCs EL2x32/42TCs EL1/2x18-42TCs EL1x18-42TCs EL2x32/42TCs EL1/2x18-42TCs EL1x18-42TCs A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 (p.98 0.97 0. Dimensions Length 'a' (mm) 103.26 0.2 42.9 16.5 ‘g’ (mm) 25.98 0.4 28.97 0.98 0.15 0.2 40.38 0.29 0.4 29.5 42.26 0.5 16.13 0.13 0.2013 4/6 59 .) (kg) (cm) EL-TCs 60 1800 260 105 Helvar | Data is subject to change without notice.23 0.07 0.09 0.5 ‘f’ (mm) 93.helvar.5 Delivery information Ballast Unit package Transportation package Pallet Pallet Pallet Minimum Carton Box 820x1280 weight height delivery amount (pcs.98 0.com T07 105 1F 20.5 ‘e’ (mm) 57.62) 11 13 12 11 13 12 11 13 12 12 11 13 12 11 13 12 11 13 (g) 118 110 118 120 113 120 131 125 131 131 131 125 131 131 125 131 131 125 (W) 15 15 28 19 19 36 27 27 51 53 32 32 64 44 44 85 58.96 0.98 0.5 Width 'b' (mm) 67 Height 'c' (mm) 28 'd' (mm) 83.96 0.94c 0.24 0.98 0.96 0.03.9 16.5 (A) 0.2 0.7 24. 50-60 Hz • Slim only 28 mm high • Multilamp operation • Single and twin lamp operation • Low power losses • Single case size A2 Lamp type TC-TE Wattage No.9 24.98 0.5 58.96 0.EL-TCs Electronic ballasts for compact fluorescent lamps 13-57 W 220-240 V.97 0.5 54 54 Home Prev Next Note: See pages 62-63 for connection diagrams and additional characteristics.09 0.94c 0.15 0.99 (W) 13.99 0.13 0.7 23.8 13.07 0.8 24 29.8 13. 25 0.08 0. EL-su Electronic ballasts for compact fluorescent lamps 18-80 W 220-240 V.24 0. 50-60 Hz • Only 21 mm high • Optimal lamp operation • Wide operational ambient temperature range • Standard & sidemount possibilities • Low power losses • Silent operation • Stabilized flickerfree light • High power factor A2 Lamp type TC-L Wattage No. More information at: www.24 0.12 0.62) 1 1 1 2 7 8 1 1 3 4 1 1 3 4 1 2 1 1 2 1 2 1 4 Weight Circuit power Mains current Lamp power (g) 190 190 190 230 215 215 175 175 250 250 175 175 250 250 190 245 190 190 245 200 260 200 305 (W) 18 18 25 49 73 97 27 27 55 55 27 27 55 55 35 69 45 45 87 59.) (kg) (cm) EL1 x s 10 2000 350 .5 24.15 0.24-0.50 0.80-0.5 24.21 0.5 117 85 170 (A) 0.18 0.03.32-0.34-0.11 0. 1) With terminals for both manual and automatic wiring(IDC & push-in) 2) Tested and recommended by Helvar.29 0.28-0.com a d c a b d b d c a b d T07 105 1F 20. of lamps 18 18 24 24 24 24 26 26 26 26 28 28 28 28 36 36 40 40 40 55 55 80 80 1 1 1 2 3 4 1 1 2 2 1 1 2 2 1 2 1 1 2 1 2 1 2 Ballast EEI EL1x36/40/18s EL1x36/40s-u 1) 2) EL1x24s EL2x24s EL3/4x24s-u 1) EL3/4x24s-u 1) EL1x14-35s 2)3) EL1x14-35s-u 2)3) EL2x14-35s 2)3) EL2x14-35s-u 2)3) EL1x14-35s 2)3) EL1x14-35s-u 2)3) EL2x14-35s 2)3) EL2x14-35s-u 2)3) EL1x39/36s EL2x39/36s EL1x36/40/18s EL1x36/40s-u 1) EL2x36/40s EL1x55s EL2x55s EL1x80s EL2x80s-u 1) Dimensions Connection A2 A2 A2 A2 A2 BAT A2 BAT A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 A2 BAT 1 3 1 2 3 3 1 1 2 2 1 1 2 2 1 2 1 3 2 1 2 1 4 (p.73 (W) 16 16 22.55-0.36 0.12 0.5 24.18 0.12 0.420 57 1500 395 57 EL2 x s 10 1500 390 57 EL3/4 x s 10 60 Helvar | Data is subject to change without notice.40 0.5 22.40-0.5 24.36 0.16-0.5 32 32 40 40 40 55 55 80 80 Home Prev Next Note: See pages 62-63 for connection diagrams and additional characteristics.5 22.24 0.44-0.helvar.24 0.5 24.EL-s.20-0.30 0. not ENEC approved 3) Cap 2GX11 Dimensions drawing Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 a 280 30 21 270 2 a 360 30 21 350 3 b 280 30 21 270 4 b 360 30 21 350 Delivery information Ballast Unit package Transportation package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.12-0.40-0.20-0.5 24.5 24.5 22.5 24.08 0.12 0.2013 5/6 . Ta= >18°C Dimensions drawing Length 'a' (mm) Width 'b' (mm) Height 'c' (mm) 'd' (mm) 1 a 280 30 21 270 2 a 360 30 21 350 3 b 280 30 21 270 4 b 360 30 21 350 Delivery information Ballast Unit package Transportation package Pallet Minimum Plastic One-way pallet Pallet 1200 x 820 weight height delivery binding strip amount (pcs.12-0.34-0.15 0.420 57 1500 395 57 EL2 x s 10 1500 390 57 EL3/4 x s 10 Helvar | Data is subject to change without notice.helvar.24-0.44-0.5 22.5 22. not ENEC approved 3) For 3/4x24W TC-F lamps.5 32 32 Home Prev Next Note: See pages 62-63 for connection diagrams and additional characteristics. 50-60 Hz • Only 21 mm high • Optimal lamp operation • Wide operational ambient temperature range • Standard & sidemount possibilities • Low power losses • Silent operation • Stabilized flickerfree light • High power factor A2 Lamp type TC-F Wattage No.com a d c a b d b d c a b d T07 105 1F 20.03.EL-s Electronic ballasts for compact fluorescent lamps 18-80 W 220-240 V.08 0.11 0.40 0.62) 1 1 1 2 1 2 1 2 Weight Circuit power Mains current Lamp power (g) 190 190 190 230 215 215 190 245 (W) 18 18 25 49 73 97 35 69 (A) 0.21 0. More information at: www.16-0.32-0.29 (W) 16 16 22.) (kg) (cm) EL1 x s 10 2000 350 . of lamps 18 18 24 24 24 24 36 36 1 1 1 2 3 4 1 2 Ballast EEI EL1x36/40/18s EL1x36/40s-u 1) 2) EL1x24s EL2x24s EL3/4x24s-u 1) 2) 3) EL3/4x24s-u 1) 2) 3) EL1x39/36s EL2x39/36s Dimensions Connection A2 A2 A2 A2 A2 BAT A2 BAT A2 A2 1 3 1 2 1 2 1 2 (p.2013 6/6 61 .30 0. 1) With terminals for both manual and automatic wiring(IDC & push-in) 2) Tested and recommended by Helvar.08 0.5 22. EL2x58s. EL4x14ngn5 9 EL2x18ngn. EL1/2x18-42TCs.2013 1/2 .Connection diagrams EL-ngn5. EL1/2x18TCs... EL1/2x18-42TCs. . More information at: www.helvar. EL-es. 1 2 3 4 5 6 7 8 9 Home 1 2 3 4 5 6 Prev Next 10 11 12 5 6 7 1 2 3 4 8 9 10 13 14 62 1 EL1x .s. EL3/4x14ngn5. EL-su.. EL2x32/42TCs. EL3/4x18ngn (four lamp connection). EL2x24ngn5. EL3/4x18s (four lamp connection) 7 EL3/4x14s-u. EL3/4x24s-u. EL2x80s-u 5 EL3/4x14s. EL2x36ngn. EL2x36/40s.. EL-TCs NOTE: All wiring to the connectors marked with a red dot (hot wires) should be as short as possible. EL2x54s. EL3/4x24ngn5 8 EL3/4x14s-u. EL1x. EL1x18-42TCs. EL2x58ngn. EL1x9-13TCs 14 EL2x14-35ngn5. EL2x58es 10 EL4x18ngn. EL1/2x36/38TCs 12 EL1/2x14/17TCs . EL3/4x24ngn5. EL2x55ngn5.com T07 106 1E 25. EL-ngn. EL2x36es. EL2x58s-u. EL1x18TCs. EL1x. EL1/2x9-13TCs. EL1/2x18TCs. EL2x49s 4 EL2x14-35s-u... EL1/2x9-13TCs. EL2x39/36ngn5. EL3/4x14ngn5. EL3/4x18s-u. EL2x80ngn5 Helvar | Data is subject to change without notice. EL3/4x18s-u. EL2x70s 3 EL2x14-35s. EL2x49s-u. EL3/4x18s (three lamp connection) 6 EL3/4x14s. EL3/4x24s-u. EL1/2x36/38TCs 13 EL1x14/17TCs . EL4x18es 11 EL1/2x14/17TCs . EL2x24s. EL2x55s.03.ngn5 2 EL2x18s. EL2x49ngn5. EL3/4x18ngn (three lamp connection). EL-s. EL2x39/36s. EL2x54ngn5. EL2x36/40s-u.ngn. 3 ~1 - - * EN 60081 for T5 & T8 fluorescent lamps.10) at tc 50 000 h.. acc.0 s <1s ~1 s <2s ~1 s 1) For 2 x 42 W lamp..temperature at tc point 75 °C 3) 4) 75 °C 75 °C 9) 75 °C 75 °C Ambient temperature range -20…+50 °C 7) -20.helvar. EN 60901 for compact fluorescent lamps Helvar | Data is subject to change without notice..+50 °C -15.. tc = 80 OC 4) For EL 2x70s. 1 h 320 VAC.4 mA < 0. at tc Max length of ballast to lamp wiring 2m 1. 1 h 320 VAC. EL2x55s and EL2x80s-u max 6 hours at 176-190 VDC 7) For 3/4x24W TC-F lamps.4 mA < 0. typical 0.98 > 0. at tc 60 000 h.+50 °C -20.5 m 2m 1. Ta= >18°C 8) 3/4x18ngn.4 mA < 0.. DC range is 190-280 V 2) EL2x32/42TCs 300 V 3) For EL 3/4x14s and EL 3/4x18s.95 Earth leakage current < 0.Characteristics EL-s / EL-su EL-ngn EL-ngn5 EL-es EL-TCs Max. to EN61347-2-3 Annex J Performance requirements EN60929 - Preheat starting - EL-TCs Lamp life acc.98 0.03. Uout = 400 V 9) 70 °C EL3/4x14ngn5 10) Please see page 64 for detailed information 11) Operationally suitable for emergency use with central battery Home Prev Next Standards EL-s / EL-su EL-ngn EL-ngn5 EL-es General and safety requirements EN61347-2-3 Additional safety requirements for AC/DC supplied ballasts acc..5 m 1 m / 2 m (hot / cold) Ignition time. typical ~1. 1 h 320 V / 1 h Power factor (at maximum). 1 h 320 VAC.4 mA < 0. C5e Type of starting. preheat (warm start) EBLF (Emergency Ballast Lumen Factor) BLF (Ballast Lumen Factor) - - >0..98 0..com T07 106 1E 25.2013 2/2 63 . at tc 60 000 h.+80 °C -40…+80 °C Maximum relative humidity no condensation no condensation no condensation no condensation no condensation Number of starts per lamp > 50 000 AC Range DC range (starting voltage >190VDC) 198-264 VAC 5)6) 176-280 VDC 6) > 60 000 198-264 VAC > 50 000 198-264 VAC > 20 000 198-264 VAC > 50 000 198-264 VAC 176-280 VDC 176-280 VDC 198-264 VDC 11) 176-280 VDC 1) Over voltage duration 320 VAC.+80 °C -40.+50 °C -20…+50 °C Storage temperature range -40…+80 °C -40. to EN61000-3-2 Radio Frequency Interference. to EN60081 / EN60901 *) Mains current harmonics. acc.. More information at: www. at tc 50 000 h. tc = 70 OC 5) For EL2x70s and EL2x80s-u AC range is 204-264 V 6) EL2x70s.. acc.+80 °C -40.to EN61547 Vibration test EN60068-2-64 test Fh Bump test EN60068-2-29 test Eb Thermal protection class EN61347.98 0... to EN55015 Immunity standard.4 mA Maximum working voltage (Uout) 400 V 350 V 8) 400 V 8) 350 V 8) 250 V 2) Lifetime (90 % survival) 50 000 h. More information at: www.2013 1/1 Home Prev Next .03.Ballast lifetime EL-ngn5 range Ta = 40 Type 64 Ta = 50 Ta = 60 W Tc (°C) Lifetime (h) Tc (°C) Lifetime (h) Tc (°C) Lifetime (h) EL1x14-35ngn5 1 x 14 43 >100 000 54 >100 000 64 ≥100 000 EL1x14-35ngn5 1 x 21 44 >100 000 55 >100 000 65 ≥100 000 EL1x14-35ngn5 1 x 28 47 >100 000 58 >100 000 68 ≥100 000 EL1x14-35ngn5 1 x 35 49 >100 000 59 >100 000 69 80 000 EL1x24ngn5 1 x 24 51 >100 000 61 >100 000 71 80 000 EL1x39/36ngn5 1 x 36 55 >100 000 65 >100 000 75 70 000 EL1x39/36ngn5 1 x 39 55 >100 000 65 >100 000 75 70 000 EL1x49ngn5 1 x 49 52 >100 000 62 >100 000 72 70 000 EL1x54ngn5 1 x 54 53 >100 000 63 >100 000 73 65 000 EL1x55ngn5 1 x 55 55 >100 000 65 >100 000 75 70 000 EL1x80ngn5 1 x 80 55 >100 000 65 >100 000 75 60 000 EL2x14-35ngn5 2 x 14 49 >100 000 59 >100 000 69 >100 000 EL2x14-35ngn5 2 x 21 50 >100 000 60 >100 000 70 >100 000 EL2x14-35ngn5 2 x 28 52 >100 000 63 >100 000 73 80 000 EL2x14-35ngn5 2 x 35 55 >100 000 65 >100 000 75 60 000 EL2x24ngn5 2 x 24 50 >100 000 60 >100 000 70 70 000 EL2x39/36ngn5 2 x 39 55 >100 000 65 >100 000 75 60 000 EL2x39/36ngn5 2 x 36 55 >100 000 65 >100 000 75 60 000 EL2x49ngn5 2 x 49 55 >100 000 65 >100 000 75 60 000 EL2x54ngn5 2 x 54 65 >100 000 75 60 000 - - EL2x55ngn5 2 x 55 60 >100 000 70 60 000 - - EL2x80ngn5 2 x 80 65 >100 000 75 60 000 - - EL3/4x14ngn5 3 x 14 52 >100 000 62 >100 000 72 80 000 EL3/4x14ngn5 4 x 14 55 >100 000 65 >100 000 75 60 000 EL4x14ngn5 4 x 14 55 >100 000 65 >100 000 75 60 000 EL3/4x24ngn5 3 x 24 50 >100 000 60 >100 000 70 90 000 EL3/4x24ngn5 4 x 24 55 >100 000 65 >100 000 75 65 000 Helvar | Data is subject to change without notice.helvar.com T07 125 1A 25. Home Prev Next Helvar | Data is subject to change without notice. More information at: www.helvar.com 65 . compact luminaires for indoor use. The ballast range is available for use directly in luminaires or for independent purposes with strain relief. Excellent colour stability throughout the lamp life.freedom in lighting Electronic HID ballasts for Discharge lamps The growing demand on energy efficiency in lighting is also leading to a rapid increase in the use of electronic ballasts in HID luminaires. More information at: www.helvar.com Next .g. Home Prev Luminaires with Helvar electronic HID ballasts are for use in various environments e. show venues and corridors. flicker free light and long lamp life are all typical properties of Helvar electronic HID ballasts. spotlight installations. Helvar ballast range ensures low energy consumption with A2 energy efficiency classification. 66 Helvar | Data is subject to change without notice. shopping malls. stores. The electronic HID ballast range for 20-70 W discharge lamps fulfils the need for high quality lighting and modern. museums. 18 0. patent pending • Square wave form lamp current • Flickerless light • Low losses • Protection class I • For HI & C-HI lamps • Over temperature protection • EOL protection (under / over lamp voltage.) 1 1 2 2 A2* Circuit power Mains current Power factor (W) 23.helvar.8 (A) 0.3 79.10 0.25-0.02. lamp missing / not igniting Lamp type HI Wattage Ballast 20 35 50 70 EP1x20h EP1x35h EP1x50h EP1x70h BEC * A2 A2 A2 A2 Power losses Dimensions (W) 3.2013 1/3 67 .3 6.98 > 0. fits all sizes. patent pending • Pioneering strain relief available for independent use. Ballasts meet the 3rd stage (year 2017) energy efficiency requirements (table 2 on page 68) Home Prev Next Note: For detailed lamp compatibility information please see page 69 Dimensions LENGTH 'a' (mm) WIDTH 'b' (mm) HEIGHT 'c' (mm) 'd' (mm) 'e' (mm) 'f' (mm) 'g' (mm) 1 95 60 30 51 82 141 31.23 0.33 > 0.99 Weight (g) 135 135 155 195 Lamp power Ignition voltage (W) 20 39 50 73 (kV pk) <5 <5 <5 <5 * Ballast efficiency class. 50-60 Hz • For indoor use only • Unique solution for protection against mains transients.8 (no.) (kg) (cm) EP1x20h 10 1680 260 68 1680 260 68 EP1x35h 10 1680 290 72 EP1x50h 10 1680 360 72 EP1x70h 10 EP-sr 60 Helvar | Data is subject to change without notice.5 5.5 43.5 2 105 65 30 56 92 151 31.EP-h Electronic Ballasts for High Intensity Discharge Lamps 20 -70 W 220-240 V.5 55.95 > 0. according to European Comission Regulation No.98 > 0.36-0. More information at: www.5 With strain relief (EP-sr) g c e d b a f Delivery information Unit package Ballast Transportation package Minimum Carton One-way pallet Pallet Pallet delivery box 1200 x 820 weight height amount (pcs.5 4.com T08 012 1F 14.11-0. rectification).20-0. 245/2009. = 50 °C Standards General.EP-h Connection details Ballast lamp distance: Terminal type: Terminals suitable for: Wire strip length: L N Lo 150 pF / 1. More information at: www. only if mounted on flammable surface.5 mm2 10 ... year 2017) 68 Helvar | Data is subject to change without notice.02.2. Ta max.5 .com T08 012 1F 14.11 mm <5kV Hi Characteristics Max. IEC/EN 61347-2-12 IEC/EN 61547 Mains current harmonics according to IEC/EN 61000-3-2 Surge immunity according to IEC/EN 61000-4-5 Radio frequency interference according to IEC/EN 55015 Ballast efficiency class (A2) Nominal lamp wattage P (W) P ≤ 30 Minimum ballast efficiency η ballasts (%) 78 30 < P ≤ 75 85 75 < P ≤ 105 87 105 < P ≤ 405 90 P > 405 92 Table 2: Minimum efficiency requirements for ballasts for discharge lamps (3rd stage. at Tc Prev Next * For independent use..helvar. Otherwise Ta max.2013 2/3 .temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Type of protection AC range Earth leakage current Maximum working voltage (Uout) Lifetime (90 % survival) EP1x. = 40 ºC for 70 W.h IEC/EN 60347-1.5 m Push in solid and stranded wire 0.4 mA 350 V 50 000 h. safety and particular requirements according to EMC immunity according to EP1x.h Home 75 °C -20…+50 °C * -40…+80 °C no condensation IP20 198-264 VAC < 0.. 5) (E27) HCI-T HCI-TF HCI-TC HCI-TX/P HCI-R111 HCI-PAR HCI-E/P (G12) (GU6.5) (GX8.0 137.5) (E27) (E27) PHILIPS CDM-T CDM-T Evolution CDM-TC CDM-TC Evolution CDM-Tm CDM-Rm CDM-R111 (G12) (G12) (G8.5) (E27) CMH 35/T CMH 35/T CMH 35/T CMH 35/TC CMH 35/MR16 CMH 35/PAR CMH 35/TD (G12) (G8. More information at: www.helvar.5) (G8.5) (G8.5) (E27) (E27) (RX7s) (RX7s) (PG12-2) (GX8.EP-h Lamp compatibility for EP1x.5) (GU6.5) (GX8.5) (G8. 20 W EP1x20h 35 W EP1x35h 50 W EP1x50h Manufacturer TYPE (cap) TYPE (cap) OSRAM HCI-TF HCI-TC HCI-R111 HCIPAR (GU6.5) (G8.5) CDM-T CDM-T Elite CDM-T Evolution CDM-TC CDM-TC Elite CDM-TC Evolution CDM-Tm Elite CDM-Rm Elite CDM-R CDM-R Eite CDM-R111 (G12) (G12) (G12) (G8.5) (RX7s) (E27) (E27) Home Prev Next Note: Not suitable for lamps with internal ignitor Quantity of ballasts for miniature circuit breakers (MCB’s) Lamp(s) 1x20 HI 1x35 HI 1x50 HI 1x70 HI EP-h EP1x20h EP1x35h EP1x50h EP1x70h Quantity of ballasts per miniature Typical circuit breaker 16 A Type C inrush current Based on Ipeak Ipeak (A) Based on ICont 104 75 22 58 52 32 46 37 28 32 32 41 Helvar | Data is subject to change without notice.5) CMH 20/T CMH 20/T CMH 20/T CMH 20/PAR (G12) (G8.5) (G8.5) (E27) (GU8..5) (G8.5) (Gu6.5) (G8.5) (GU6.05 0.5) (GX10) (E27) (E27) (GX8.13 0.22 T08 012 1F 14.5) (GX10) (E27) HCI-T HCI-TC HCI-TS HCI-T/P HCI-E/P HCI-R111 HCI-PAR HCI-TX/P HQI-T HQI-TS HQI-E CDM-T CDM-T Elite CDM-T Fresh CDM-TC CDM-TC Elite CDM-TC Fresh CDM-R CDM-R Elite CDM-TD CDM-TD Essential CDM-TP CDM-R111 CMH 70/T CMH 70/T CMH 70/TC CMH 70/TD CMH 70/PAR CMH 70/E (G12) (G8..5) (G8.2013 3/3 69 .com 1/2 time Δt (µs) 135.5) (GU8.10 0.5) (GX10) (GX8.0 188.5) (G12) (G8.5) (RX7s) (E27) (E27) (GX8.02.5) (G8.0 222.5) (GU6.5) (GX10) (E27) (RX7s) GE TYPE CDM-T Elite CDM-T Fresh CDM-TC Elite CDM-TC Fresh CDM-Tm Elite CDM-Rm Elite CDM-R Elite 70 W EP1x70h (cap) TYPE (cap) (G12) (G12) (G8.5) (GU6.5) (G8.5) (G12) (RX7s) (E27) (G12) (G12) (G12) (G8.0 value Calculated energy Ipeak2Δt (A2s) 0. Meeting international standards and local regulations are the natural starting points in our: approach to quality – but 70 Home it does not end there! ‘Whether noise levels. service life. manufacturing and delivering ballasts for fluorescent lamps.helvar. Helvar | Data is subject to change without notice. The know-how has turned into successful partnerships with luminaire manufacturers and benefits our customers world wide. Fully automatic high-volume production and 100 % quality control are ways in which we achieve the top quality in our products. More information at: www.freedom in lighting Magnetic ballasts for fluorescent lamps HELVAR has over 6 decades of experience in designing. high technical standards are our main objectives in product development.com Prev Next . High quality is the key element in HELVAR ballasts. magnetic stray fields or terminal design are concerned. This gives the luminaire manufacturers a possibility to optimise their fitting construction. as well as the know-how to benefit from different materials.com Prev Next 71 .helvar. as well as types for circular or U-shaped ones for instance.Offering HELVAR's fluorescent ballast range offers products to all relevant energy efficiency classes. Furthermore. The flexibility in HELVAR’s production philosophy and product design. gives the right means to react to the latest demands in energy efficiency classification. This gives flexibility to luminaire designers and end users to make the right choices for each application and market sector. for certain lamps. More information at: www. ballasts with different operating temperatures are available. Ballasts for compact lamps. are also included in our range. Helvar | Data is subject to change without notice. HELVAR's product range also includes different voltage and frequency alternatives. Home HELVAR's ballast range covers linear fluorescent lamps up to 125 W with voltages between 220-240 VAC. 45 0.5 0.37 0..14 4.37 0.55 0.51 0.50 0.82 0.5 0.61 0.76) 1.23 4.35 0.5 0.32 0.56 0. dimensions and delivery information.5 0.55 0.45 0.23 4.43 0.5 0.55 0.46 0.37 0..78 0.23 4. See page 126 for ENEC approved combinations.50 0.23 4.29 0.37 0.5 0.365 0.43 0.43 0. 1) Not available for European Union market 2) Lamps excluded from the CELMA EEI directive do not have an EEI classification 72 Helvar | Data is subject to change without notice.0 0.L-A.2 1.18 4.0 0.50 0.45 0.2013 1/2 Home Prev Next .37 0. / L-T.43 0.2 1.60 0.365 0.47 0.2 1.29 0.45 0..46 0.Net Inductive sions tion weight B1 B2 B2 B1 B2 B2 B1 B2 B1 B1 B2 B2 B2 C B1 B1 B2 B2 B2 B2 C B2 B2 D B1 B2 B2 B1 B2 B2 B1 B1 B2 B2 B2 B2 C D (p.5 0.36 W 230 V.30 0.82 0.5 0.60 0.23 4.65 0.23 4.53 0.2 1.2 1.23 4.5 0.2 1.2 4 4 4 1.43 0.61 0.2 1.12 4.com T10 145 1D 18.43 0.5 0.31 0.18 4.31 0.23 4.2 1. More information at: www.46 0.2 1.37 0.50 0.5 0.51 0.65 0.5 0.76 0.29 0.32 0.76 0.31 0.37 0.45 0.0 0.365 0.15 3.55 0.0 0.5 0.2 1.45 0.37 0.65 0.15 3.5 0.32 0.57 0.57 0.helvar..78 0.12 4.37 0.37 0.2 4 4 4 4 4 4 4 4 4 4 1.32 0.53 0.5 0.23 4.23 Note: See page 76 for connection diagrams.31 0.2 1.61 0.5 0.5 0.23 4.37 0.83 0.19 4.14 4.2 1.57 0.23 4.76 0.37 0.37 0.50 0.14 4.50 0.31 0.14 4.5 0.5 0. rise Δt (°C) 40/70 50/95 55/80 30/70 55/110 50/125 60/150 65/150 35/60 40/70 45/80 50/95 50/95 65/90 35/90 40/90 45/110 50/145 50/140 50/155 55/160 65 / 65 65/160 35/70 40/80 40/95 30/70 55/110 50/125 35/90 40/90 45/110 50/145 50/140 50/155 55/160 65/160 Compensation Mains Parallel Ck current 230/250V ±10 % (µF) (A) 4.37 0.14 4.45 0. 50 Hz • Meets EN 61347-2-8 & EN60921 requirements • Low harmonics • Low power losses • Correctly trimmed lamp current guaranteed for entire lifetime • 100 % quality controlled • Double wire terminals without screws • Small size • Long lifetime Lamp type T8 tw 130 Lamp Lamp No.37 0.5 0.43 0.45 0. / L-D Magnetic ballasts for fluorescent T8 lamps 15 .57 0.14 4.2 1.43 0.30 0.30 0.5 0.35 0.31 0.31 0.5 0.45 0.23 4.23 3.51 λ 0.5 0.2 1.57 0.50 Temp.2 1.2 (kg) 0.53 0.5 0.43 0.2 1.23 4.56 0.03.43 0.31 0.5 0.11 4.45 0.5 0.5 0.2 1.5 0.43 L 15 TL3 L 15 A-P L 15 A L 30 TL2 L 30 A L 30 A-P L 16 DL L 16 D L 18 TL2 L 18 TL3 L 18 TL4 L 18 A-T L 18 A-K L 18 A-L 1) L 36 TL2 L 36 TL3 L 36 TL4 L 36 A-K L 36 A-TK L 36 A-T L 40 A-C 1) L 2x18 A-L L 2x18 A-N L 40 A-L 1) L 15 TL3 L 15 A L 15 A-P L 30 TL2 L 30 A L 30 A-P L 36 TL2 L 36 TL3 L 36 TL4 L 36 A-K L 36 A-TK L 36 A-T L 40 A-C 1) L 40 A-L 1) Ballast EEI Dimen.5 0.37 0.21 4.2 1.21 2.51 0.76) 3 1 1 3 1 1 6 6 3 3 3 1 1 1 3 3 3 1 1 1 1 1 1 1 3 1 1 3 1 1 3 3 3 1 1 1 1 1 (p.61 0.5 0.37 0.12 4.2 1.11 2.61 0.20 0.20 4.Connec.0 0.50 0.55 0.5 0.2 1.83 0.23 4.5 0. of Lamp Ballast type wattage lamps current (W) 15 15 15 15 15 15 16 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 25 25 25 30 30 30 36 36 36 36 36 36 36 36 1 1 1 2 2 2 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (A) 0.2 1.5 0.2 1.20 0.23 4.83 0.23 4.15 4. 24 4.67 0.67 0.06 1.67 0. More information at: www.2 1.2 1.24 4.34 7. / L-T.76) 3 3 3 1 1 1 1 1 4 4 4 5 2 2 2 2 2 (p.2 1.5 0.2 1..43 0.48 0.43 0.34 7.0 0.2 1.37 0. Magnetic ballasts for fluorescent T8 lamps 38 .0 0.2 1.24 4.24 4.50 0..43 0.2 1.2 1.48 0.45 0.57 0.88 0.53 0.50 Temp.45 0.67 0.34 7.2 1.67 0.24 4.2 (kg) 0.58 W 230 V.43 0.45 0.0 0.2013 2/2 73 .43 0.helvar.45 0.83 0.45 0.5 0.Connec.34 7.0 0.67 0..2 1.51 1. 50 Hz • Meets EN 61347-2-8 & EN60921 requirements • Low harmonics • Low power losses • Correctly trimmed lamp current guaranteed for entire lifetime • 100 % quality controlled • Double wire terminals without screws • Small size • Long lifetime Lamp type T8 tw 130 Lamp Lamp No.67 0.2 1.67 0.48 0.2 1.87 λ 0.34 Home Prev Next Note: See page 76 for connection diagrams.43 0.50 0.0 0.36 1.34 7.34 7.88 0.92 0.0 0.48 0. See page 126 for ENEC approved combinations.34 7.0 0.43 0.45 0.78 0.2 1.76) 1.0 0.L-A.61 0.24 4.00 0.48 0.5 0.2 1.0 0.5 0. 1) Not available for European Union market Helvar | Data is subject to change without notice.5 0.65 0. dimensions and delivery information.2 1.24 7.Net Inductive sions tion weight B1 B1 B2 B2 B2 B2 C D B1 B1 B2 B2 B2 B2 B2 B2 C (p.48 0.2 1.com T10 145 1D 18.5 0. rise Δt (°C) 35/90 40/90 45/110 50/140 50/145 50/155 55/160 65/160 35/95 40/95 40/110 40/110 45/130 45/135 50/140 50/145 55/145 Compensation Parallel Ck Mains current 230/250V ±10 % (µF) (A) 4. of Lamp Ballast type wattage lamps current (W) 38 38 38 38 38 38 38 38 58 58 58 58 58 58 58 58 58 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (A) 0.57 0.30 1.67 L 36 TL2 L 36 TL3 L 36 TL4 L 36 A-TK L 36 A-K L 36 A-T L 40 A-C 1) L 40 A-L 1) L 58 TL2 L 58 TL3 L 58 TL4-220mm L 58 TL4 L 58 A-S L 58 A-K L 58 A-TK L 58 A-T L 65 A-P 1) Ballast EEI Dimen.45 0..03.5 0.5 0.34 7.45 0.24 4.09 1. 29 L 40 A-P 3) L 15 A 30 1 0.50 60 45 6.2 1.57 0. rise (W) 15 15 1 2 (A) 0.0 0.56 λ 0.28 0.32 58 1 0.17 30 1 0.10 18 1 0.35 60/90 4.61 0.0 0.42 35/95 7.56 0.22 36 1 0.51 0.67 L 40 A-P 3) L 58 TL2 58 1 0.43 L 40 A-P L 36 TL2 B2 C 1 1 1.37 L 36 A-K B2 1 4 0.4) 4 3 1.2 0.51 0.45 65/160 2.88 0.22 0.32 3) 38 1 0.0 6.45 55/155 4.2013 1/1 Prev Next .48 0.32 0.0 0.52 65/ - 4.37 L 36 A-T B2 1 4 0.31 L 30 A B2 1 4 0.4) 4 1.0 0.0 0.22 3) 18 2 0.2 0.0 0.2 1.0 0.61 0.com Home 0..17 T10 146 1D 18.50 55/155 4.43 0..83 0.23 B1 4 1.5 0.Connec..76) 1.57 0.44 35/95 4.57 0.56 0.76) 1 1 (p.83 0.49 0.47 0.45 55/125 Compensation Parallel Ck Mains current 230/250V ±10 % (µF) (A) 4.41 0.0 7.31 L 15 A L 30 A-P B2 B2 (p.70 L 65 A-P 3) L 75 A-S B2 C 2 2 1.61 0.37 L 2x18 A-N 18 25 2 1 0.43 L 36 TL2 B1 3 1.54 0.0 0.0 0.35 0.2 1.51 0.31 0.70 0.09 0.22 B2 1 1.2 0.0 0.45 55/90 3.50 55/155 70/160 4.32 0.2 1.48 0. 1) Essential: Series capacitor 7.0 16 1 0.50 55/145 60/145 7.2 0.2 0.Net Inductive sions tion weight Temp.56 0. / L-T.48 50/145 7.94 L100 TE61 .0 0.67 L 58 A-T 58 70 1 1 0.0 0.13 18 1 0.52 55/155 70/160 4.2 1.17 4.0 4.0 0. More information at: www.0 0.helvar..36 0.33 65/100 4.0 0.56 0.17 36 1 0.22 B2 C 1 1 4 4 0.37 L 36 TL2 B1 3 4 0.32 B2 2 1.03.5 0.2 0.2 4 (kg) 0.61 0.61 0.37 L 2x18 A-L B2 1 4 0.5 0.52 55/155 4.23 0.2 0.32 0.2 µF ±4 % 440 V 2) Capacitive 3) Not available for European Union market 4) Lamps excluded from the CELMA EEI directive do not have an EEI classification 74 Helvar | Data is subject to change without notice.56 0.0 0.11 4.L-A.45 55/125 4.00 70 100 1 1 0.37 L 18 A-K B2 1 1.67 L 58 A-K B2 2 1.0 0.2 0.0 0.43 0.60 0.2 0.60 0.52 60/145 10.37 L 18 A-L 3) C 1 1. dimensions and delivery information.43 L 36 A-K B2 1 1.43 L 36 A-K B2 1 1.2 0.365 L 30 A B2 1 1.44 35/95 4.0 0.0 0.2 1.45 Δt (°C) 55/80 55/125 15 2 0.37 L 20 A-P C 1 1.0 0.37 0.14 18 2 0.42 35/95 4. of Lamp Ballast type wattage lamps current Ballast EEI Dimen.5 4.96 L 70 TL4 L100 TE61 B2 5 1. / L-D Magnetic ballasts for fluorescent T8 lamps 15-125 W 240 V 50 Hz • Meets EN 61347-2-8 & EN60921 requirements • Low harmonics • Low power losses • Correctly trimmed lamp current guaranteed for entire lifetime • 100 % quality controlled • Double wire terminals without screws • Small size • Long lifetime Lamp type T8 tw 130 Lamp Lamp No.45 55/155 4.13 18 2 0.23 B2 C 1 1 1.22 B1 3 1.2 1.88 0.22 18 2 0.32 55/90 4.55 125 1 0.83 0.92 0.22 36 1 0.13 18 1 0.43 L 36 A-T 36 38 1 1 0.40 .2 L 16 D B2 6 2 0.22 18 2 0.22 38 1 0.2 0.2 0.2 0.22 0.67 0.365 L 30 A-P B2 1 1.0 0.61 0.2 0.53 65 70/160 4 4.45 55/125 4.43 L 36 A-T 38 58 1 1 0.62c2) 60/145 -1) - Note: See page 76 for connection diagrams. 2 0.Net Inductive sions tion weight (A) Temp.56 65 4.5 0.51 0.76) (kg) λ Δt (°C) 18 1 0.5 0.0 0.51 0.5 0. / L-T.51 0.56 0. rise Compensation Parallel Ck Mains current 230/250V ±10 % (µF) (A) (p.365 L 30 A-P 36 1 0.67 L 65 A-P 1) C 2 1.L-A.50 55/145 7.47 0..helvar.55 65/160 4.24 18 2 0.58 W 220 V 50 Hz • Meets EN 61347-2-8 & EN60921 requirements • Low harmonics • Low power losses • Correctly trimmed lamp current guaranteed for entire lifetime • 100 % quality controlled • Double wire terminals without screws • Small size • Long lifetime Lamp type tw 130 Lamp Lamp No.5 0.50 65/160 4. dimensions and delivery information.2 0..88 0.Connec.37 L 2x18 A-N B2 1 4 0.5 0.49 0. More information at: www. of Lamp Ballast type wattage lamps current (W) T8 Ballast EEI Dimen..2 0.37 L 36 A-N 1) D 4 4 0.43 L 40 A-L 1) D 1 1.37 L 2x18 A-L B2 1 4 0.51 0.24 0.16 18 2 0.5 0.24 18 2 0.5 0.35 Home Prev Next Note: See page 76 for connection diagrams..54 65 4.5 0.55 65 4.21 L 40 A-L 1) D 1 1.49 0.37 L 40 A-L 1) C 1 4 0.37 L 18 A-L 1) C 1 1.5 0.76) (p.50 45/110 4.43 36 1 38 1 58 1 B2 1 1.49 65/160 4.23 18 2 0.03.2 0.2013 1/1 75 .48 0. Magnetic ballasts for fluorescent T8 lamps 15 .2 0.24 0.52 65 4.com T10 147 1C 18.35 65/90 4.2 0. 1) Not available for European Union market Helvar | Data is subject to change without notice.43 L 36 A-N 1) D 1 1.24 0.24 30 1 0. / L-D Connection diagrams 1 2 3 4 Home Dimensions No.D / DL 10 30 X X (pcs.com Pallet height (cm) 53 63 45 68 68 58 40 T10 148 1B 05.helvar. 1 Drawing A Length 'a' (mm) 150 Width 'b' (mm) 42 Height 'c' (mm) 28 'd' (mm) 140 Prev 2 3 4 5 6 A B B B C 190 150 230 190 85 42 42 42 42 41.2012 1/1 .100 T/TL/TE Carton box Minimum delivery amount One-way pallet 730 x 650 Delivery information Ballast Pallet weight (pcs. L 21TL L 42 . ...5 28 28.L-A.) (pcs.) 1250 2100 750 2000 1000 1200 1800 1120 x 730 X X X 1080 x 770 10 10 10 Eur pallet 1200 x 820 Plastic binding strip L 18 .40 A… 10 X L 58.) (pcs..TS / TLD.85 A… L. More information at: www...) 1400 840 1500 750 - 2000 960 1200 - 720 - (kg) 720-1190 1010-1159 1080 A/AK 602-1256 AP/AT 545-1135 720-1215 1800 612 Helvar | Data is subject to change without notice.. / L-T..8 28.36TL L.8 28 180 140 220 180 73 a Next b c Delivery information 76 Unit package Transportation package L 15 .8 28.03.. 32 0.5 0.23 4.5 0.5 0.41 0.61 0.53 0.23 4.23 4.37 0.345 0.37 0.65 0.61 0.37 0.5 0.30 0..51 0.5 0.51 λ 0.5 0.43 L18 TL2 L18 TL3 L18 TL4 L18 A-K L18 A-T L18 A-L 1) L36 TL2 L36 TL3 L36 TL4 L36 A-K L36 A-TK L36 A-T L40 A-C 1) L40 A-L 1) L18 TL2 L18 TL3 L18 TL4 L18 A-K L18 A-T L26 TS5-100mm L18 A-L 1) L36 TL2 L36 TL3 L36 TL4 L36 A-K L36 A-TK L36 A-T L40 A-C 1) L40 A-L 1) Ballast EEI Dimen.83 0.16 4.42 0.23 4.38 0.16 4.38 0.23 4.23 4.50 Temp. / L-T. 50 Hz • Meets EN 61347-2-8 & EN 60921requirements • Low power losses • 100 % quality controlled • Double wire terminals without screws • Low harmonics • Very low magnetic field • Small size • Long lifetime Lamp type TC-L tw 130 Lamp Lamp No. Magnetic ballasts for compact fluorescent lamps 18 .40 0.Net Inductive sions tion weight B1 B1 B2 B2 B2 C B1 B1 B2 B2 B2 B2 C D B1 B1 B1 B2 B2 B2 C B1 B1 B2 B2 B2 B2 C D (p.5 0.45 0.45 0.37 0.57 0.32 0.81) 2 2 2 1 1 1 2 2 2 1 1 1 1 1 2 2 2 1 1 3 1 2 2 2 1 1 1 1 1 (p.23 4.43 0.345 0.37 0.36 W 230 V.81) 3 3 3 3 3 3 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 (kg) 0.51 0.45 0.0 0.57 0.50 0.5 0.50 0. rise Δt (°C) 35/60 40/70 45/80 55/95 50/95 65/90 35/90 40/90 45/110 50/145 50/140 50/155 55/160 65/160 35/60 40/70 45/80 55/95 50/95 55/100 65/90 35/90 40/90 45/110 50/145 50/140 50/155 55/160 65/160 Compensation Parallel Ck Mains current 230/250V ±10 % (µF) (A) 4.43 0. dimensions and delivery information.37 0.23 4.com T10 149 1D 18.16 4.helvar.23 4.50 0.5 0.5 0.5 0.16 4.65 0.65 0.23 4.37 0.57 0.83 0.83 0..53 0.78 0..65 0.50 0.5 0.5 0.50 0.37 0.345 0.15 4.43 0.345 0.43 0.45 0. See page 126 for ENEC approved combinations.37 0.37 0.23 4.78 0.0 0.45 0.43 0.L-A.2013 1/3 77 .15 4.5 0.45 0.5 0.23 Home Prev Next Note: See page 76 for connection diagrams.23 4.5 0.23 4..5 0.0 0.51 0.5 0.23 4.43 0.35 0.43 0.5 0.15 4.345 0.38 0.37 0.16 4.37 0.61 0.57 0.16 4.15 4.03.57 0.5 0.83 0.16 4.5 0.78 0.5 0.0 0.15 4.40 0.345 0.43 0.76 0.37 0. 1) Not available for European Union market Helvar | Data is subject to change without notice.53 0.345 0.0 0. of Lamp Ballast type wattage lamps current (W) 18 18 18 18 18 18 18 18 18 18 18 18 18 18 24 24 24 24 24 24 24 36 36 36 36 36 36 36 36 1 1 1 1 1 1 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (A) 0. More information at: www.30 0.Connec.37 0.61 0.37 0.0 0.55 0.43 0.15 4.0 0.30 0.23 4.57 0. 19 0. external starter required 3) Cap G10q 78 Helvar | Data is subject to change without notice.20 4.78 0.32 0.5 0.5 0..175 0.18 3.45 0.57 0.0 0.5 0.45 0.5 0.51 0.18 3.20 0.57 0.325 0.325 0.81) 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 7 7 7 5 5 5 5 5 5 5 5 5 5 8 5 5 5 5 (kg) 0.43 0.48 0.83 0.43 0. More information at: www.5 0.48 0.325 0.24 4.24 4.5 0.0 0.0 0.61 0.13 3.65 0.175 0.325 0.03. rise Δt (°C) 60/150 65/150 35/60 40/70 45/80 50/95 65/90 35/90 40/90 45/110 50/145 50/140 50/155 55/160 65/160 40/70 60/110 55/120 50/95 65/120 50/95 65/120 30/60 60/150 65/155 35/60 40/70 45/80 50/95 55/95 50/100 60/140 75/90 Compensation Mains Parallel Ck current 230/250V ±10 % (µF) (A) 2.20 3.44 0.0 0.325 0.45 0.325 L16 DL L16 D L18 TL2 L18 TL3 L18 TL4 L18 A-T L18 A-L 1) L 36 TL2 L 36 TL3 L 36 TL4 L36 A-K L36 A-TK L36 A-T L40 A-C 1) L40 A-L 1) L30 TL2 L30 A 1) L32 TB2 L13 DL L13 D L13 DL L13 D L18 TLD-100mm L18 DL L18 D L18 TL2 L18 TL3 L18 TL4 L18 A-T L18 A-K L26 TS5-100mm L26 S-100mm L18 A-L 1) Ballast EEI Dimen.08 2.22 0.32 0.43 0.43 0.0 0.45 0..45 0.30 0.32 0.5 0.11 2.40 0.45 0.50 0.17 5.22 0.65 0.325 0.43 0.50 0. / L-T.78 0.83 0.0 0.32 0.17 5. dimensions and delivery information.20 3.5 0.com T10 149 1D 18.51 λ 0.325 0. / L-D Magnetic ballasts for compact fluorescent lamps 10 .45 Temp.48 0.24 5.18 3.helvar..18 3.Connec.20 0.08 2.18 Note: See page 76 for connection diagrams.5 0.0 0.78 0.5 0. 1) Not available for European Union market 2) Also GR 10q.24 4.50 0.08 2.5 0.45 0.20 3.5 0.Net Inductive sions tion weight B1 B2 B1 B1 B2 B2 C B1 B1 B2 B2 B2 B2 C D B1 C B2 B2 B2 B1 B1 B1 B1 B1 B1 B1 B2 B2 B2 B2 B2 C (p.48 0.325 0.5 0.45 0.50 0.57 0.12 2.18 3.35 0.0 0.19 0.43 0.61 0.43 0.46 0.50 0.24 4.43 0.325 0.57 0.0 0.22 0.L-A.35 0.2013 2/3 Home Prev Next .45 0.45 0.48 0.21 2.08 2.5 0.5 0.43 0.45 0.24 4. 50 Hz • Meets EN 61347-2-8 & EN 60921requirements • Low power losses • 100 % quality controlled • Double wire terminals without screws • Low harmonics • Very low magnetic field • Small size • Long lifetime Lamp type TC-DD2) T-R 3) TC-D tw 130 Lamp Lamp No.32 0.65 0.325 0.83 0.45 0.38 W 230 V. of Lamp Ballast type wattage lamps current (W) 16 16 28 28 28 28 28 38 38 38 38 38 38 38 38 22 22 32 10 10 13 13 18 18 18 26 26 26 26 26 26 26 26 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (A) 0.18 3.43 0.12 2.5 0..51 0.43 0.40 0.0 0.5 0.24 4.53 0.35 0.44 0.81) 4 4 2 2 2 1 1 2 2 2 1 1 1 1 1 2 1 2 4 4 4 4 3 4 4 2 2 2 1 1 3 5 1 (p.45 0.5 0.47 0. See page 126 for ENEC approved combinations.62 0.45 0.32 0.0 0.325 0.18 3.5 0.40 0.20 3.5 0.61 0.5 0.32 0.32 0.24 4.82 0.11 3.0 0.325 0. rise Δt (°C) 65/90 65/90 65/90 50/95 65/120 65/90 60/85 50/95 60/150 65/150 50/95 65/120 60/95 60/85 50/95 65/120 60/95 60/85 50/95 65/120 60/95 60/85 50/95 65/120 60/95 60/85 Compensation Mains Parallel Ck current 230/250V ±10 % (µF) (A) 2.10 2.33 0.09 2.16 0.0 0.165 0. Helvar | Data is subject to change without notice.13 W 230 V.43 Temp.32 0.06 2.0 0.33 0.32 0.0 0.17 0.07 2.0 0.11 2.16 0.0 0.32 0.08 Home Prev Next Note: See page 76 for connection diagrams.81) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 (p.0 0.09 2.0 0.35 0.145 0.32 0. More information at: www.32 0.Net Inductive sions tion weight B2 B2 B2 B1 B1 B2 B2 B1 B1 B2 B1 B1 B2 B2 B1 B1 B1 B2 B1 B1 B1 B2 B1 B1 B1 B2 (p.0 0.06 2. dimensions and delivery information.32 0.com T10 149 1D 18.0 0.55 0.32 λ 0.07 2.35 0.0 0.145 0.07 2.18 0.0 0.50 0.28 0.18 0.07 2.145 0.08 2.0 0.11 2.165 0.32 0.45 0.25 0.45 0.30 0.50 0.28 0.32 0.25 0.0 0.0 0.10 2.L-D Magnetic ballasts for compact fluorescent lamps 4 .32 0.07 2.18 0.0 0.16 0.0 0.0 0.32 0.18 0.81) 1 2 1 2 2 1 1 2 2 2 1 1 5 5 6 6 5 5 6 6 5 5 6 6 5 5 (kg) 0.17 0.32 0.32 0.45 0.0 0.08 2.145 0.0 0.0 0.0 0.43 0.32 0.0 0.17 0.155 L8 D L8 D L8 D L13 DL L13 D L8 D L11 D L13 DL L16 DL L16 D L13 DL L13 D L11 DL L11 D L13 DL L13 D L11 DL L11 D L 13 DL L 13 D L11 DL L11 D L13 DL L13 D L11 DL L11 D Ballast EEI Dimen.07 2.helvar.40 0.32 0. 50 Hz • Meets EN 61347-2-8 & EN 60921requirements • Low power losses • 100 % quality controlled • Double wire terminals without screws • Low harmonics • Very low magnetic field • Small size • Long lifetime Lamp type T5 TC-S tw 130 Lamp Lamp No.145 0.2013 3/3 79 .Connec.32 0.17 0.18 0.45 0.18 0.30 0.32 0.55 0.32 0.10 2.06 2.32 0.32 0. of Lamp Ballast type wattage lamps current (W) 4 4 6 6 6 8 8 8 8 8 13 13 5 5 5 5 7 7 7 7 9 9 9 9 11 11 1 2 1 2 2 1 1 2 2 2 1 1 1 1 2 2 1 1 2 2 1 1 2 2 1 1 (A) 0.18 0.43 0.17 0.32 0.32 0.08 2.45 0.06 2. See page 126 for ENEC approved combinations.0 0.10 2.08 2.155 0.32 0.10 2.33 0.0 0.06 2.18 0.08 2.32 0.32 0.0 0.0 0.03.45 0.32 0.17 0.32 0. 0 2.37 0.45 0.0 4. / L-T.29 0.08 0.35 0.35 0.0 2.32 0.56 0.0 2.0 4.145 0.45 0.42 0.0 4.175 0.325 0.50 0.32 0.43 0.56 0.5 3.32 0.37 0.17 0.32 0.0 4.44 0.345 0.32 0.22 0.50 0.0 2.09 0.65 0.56 0.0 2.37 0.45 0.05 0.0 2.32 0.07 0.15 0. / L-D Magnetic ballasts for compact fluorescent lamps 4-36 W 240 V.0 4.16 0.21 0.155 0.06 0.61 0.06 0..165 0.com T10 150 1E 18.0 2.0 3.16 0.32 0.33 0. of Lamp Ballast type wattage lamps current (W) 4 4 6 6 8 8 8 13 5 5 7 7 9 9 11 10 13 18 26 26 26 26 18 18 18 18 18 18 18 24 24 36 36 36 36 16 28 22 1 2 1 2 1 1 2 1 1 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 (A) 0.32 0.45 0.32 0.18 0.5 3.Net Inductive sions tion weight B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B2 B1 B2 B2 B2 C B2 B2 C B1 B2 B2 C B2 C B1 B2 B2 C B2 C B2 (p.helvar.05 0.12 0. rise Δt (°C) 60/90 60/90 60/90 65/110 60/90 65/90 65/90 65/110 65/90 65/110 65/90 65/110 65/90 65/110 65/90 65/110 65/110 65/155 55/90 50/110 60/150 60/90 45/80 55 /90 60/90 35/95 55/155 55/155 70/160 55/110 60/90 35/95 55/155 55/155 70/160 65/160 60/90 60/125 Compensation Mains Parallel Ck current 230/250V ±10 % (µF) 2.32 0.17 0.17 0.43 0.08 0.08 0..0 4.37 0.17 0.32 0.37 0.83 0..45 0.43 0.50 0.22 0.43 0.Connec.33 0.61 0.5 (A) 0.18 0.32 0.15 0.19 Note: See page 76 for connection diagrams.32 0.32 0.08 0.0 2.0 2.08 0.18 0.45 0.17 0.43 0.07 0.0 2.10 0.5 4.32 0.22 0.08 0.44 0. 50 Hz • Meets EN 61347-2-8 & EN 60921requirements • Low power losses • 100 % quality controlled • Double wire terminals without screws • Low harmonics • Very low magnetic field • Small size • Long lifetime Lamp type T5 TC-S TC-D TC-L TC-DD2) T-R3) tw 130 Lamp Lamp No.18 0. external starter required 3) Cap G10q 80 Helvar | Data is subject to change without notice.11 0.37 0.57 0.51 λ 0.15 0.32 0.03.195 0.18 0.17 0.5 3.22 0.57 0.22 0.345 0.37 0.0 4.19 0.50 0.0 3.25 0.145 0.45 0.47 0.45 0.06 0.0 2.0 2.5 4.32 0.45 0.52 0.21 0. also GR 10q.56 0.38 0.0 2.0 2. More information at: www.10 0.21 0.30 0.0 3.33 0.145 0.40 0.56 0.81) 1 2 1 2 1 1 2 1 5 6 5 6 5 6 5 5 5 5 3 5 5 5 3 3 3 4 4 4 4 3 3 3 3 3 3 8 8 7 (kg) 0.40 L8D L8D L8D L 13 D L8D L 11 D L 16 D L 13 D L 11 D L 13 D L 11 D L 13 D L 11 D L 13 D L 11 D L 13 D L 13 D L 18 D L 18 A-K L 26 TS5-100 L 26 S-100 L 20 A-P 1) L 18 TL4 L 18 A-K L 20 A-P 1) L 36 TL2 L 36 A-K L 36 A-T L 40 A-P 1) L 26 TS5-100 L 20 A-P 1) L 36 TL2 L 36 A-K L 36 A-T L 40 A-P 1) L 16 D L 20 A-P 1) L 30 A Ballast EEI Dimen. 1) Not available for European Union market 2) Cap GR8.61 0.0 2.2013 1/1 Home Prev Next .45 0.21 0.61 0.35 0.25 0.L-A.30 0.0 2.35 Temp.81) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1 3 5 1 2 1 1 2 1 1 1 3 1 2 1 1 1 4 1 1 (p.83 0.32 0.42 0.0 2.0 4.. dimensions and delivery information.32 0.17 0.17 0.0 2.55 0.43 0.32 0.56 0.50 0.06 0.0 4.325 0.15 0.53 0.325 0.15 0.43 0.325 0.32 0.0 4.5 3. 36TL L.helvar.com T10 152 1A 05.2012 1/1 81 .L-A. L 21TL Carton box Minimum delivery amount One-way pallet 730 x 650 Delivery information Ballast (pcs.D / DL L 26 S-100mm 30 8 X X (pcs..8 28..03.) (pcs.8 28 26 'd' (mm) 140 140 100 73 100 a b c Delivery information Unit package Transportation package L 15 .. / L-D Connection diagrams 1 2 3 4 5 6 7 8 Home Prev Dimensions Next d No.40 A… 10 X L.TS / TLD.5 42 Height 'c' (mm) 28 28.. 1 2 3 4 5 Drawing A B B C D Length 'a' (mm) 150 150 110 85 110 Width 'b' (mm) 42 42 42 41.) 1400 840 1500 2000 960 - - - 1800 - Pallet weight Pallet height (kg) 720-1190 1010-1159 A/AK 602-1256 AP/AT 545-1135 612 925 (cm) 53 63 68 68 40 46 Helvar | Data is subject to change without notice...) (pcs. More information at: www. / L-T..) 1250 2100 2000 1000 1800 2016 1120 x 730 X X 1080 x 770 10 10 Eur pallet 1200 x 820 Plastic binding strip L 18 .. Helvar | Data is subject to change without notice.helvar.com Prev Next . The benefit of HID lamps is the higher light output that can be achieved compared to normal fluorescent lighting. High Pressure Discharge (or HID lamps) work with a substantially higher gas pressure inside the lamp. As the lumen per watt ratio produced by HID lamps is substantially greater than with normal fluorescent lights. 82 Home HELVAR manufactures ballasts for all main HID lamp types. More information at: www. The high quality of HELVAR HID ballasts is guaranteed due to uncompromising material selection and 100 % testing of products. they are especially suitable for outdoor lighting and large indoor spaces.freedom in lighting Magnetic ballasts for HID lamps Unlike fluorescent lamps. More information at: www.helvar. Also intelligent digital timer versions with continuous lamp state check are available for lamps 100-600 W. Ballasts 50-600 W are available with or with-out internal thermal protector. As energy saving products with high quality is our main interest. Small wattage ballasts 50-125 W are equipped with push-in terminal and higher wattages 250-400 W are equipped with screw terminal. 250 W is also available with push-in terminal. Ballasts for 1000 W are supplied as twin versions.com Home Prev Next 83 . Ignitors for HID lamps Helvar ignitors operate with the superimposed pulse principle. Ballasts 35-400 W are available with or with-out internal thermal protector. Superimposed ignition means that the ballast is not exposed to the very high ignition voltage produced by the ignitor. Ballast for 1000 W is supplied as twin version. Ballasts for high pressure sodium lamps Helvar offering covers ballasts for lamps from 50 W up to 1000 W. This concept is widely accepted as the most reliable system for ignition of discharge lamps. Helvar | Data is subject to change without notice. Helvar offering covers standard versions and timer versions for lamps 35-1000 W. Helvar has new power reduction ballasts for 50-150 W lamps.Offering Ballasts for high pressure mercury lamps Helvar offers ballasts for lamps 50 W-400 W. Ballasts for metal halide lamps Helvar offering covers ballasts for lamps from 35 W up to 1000 W. 0 0. rise Compensation Mains Parallel Ck 230/250V current ±10 % (µF) (A) (p.0 14.70/0. 50 Hz • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime tw 130 Lamp type Lamp Lamp wattage Lamp current (W) (A) Voltage Power losses Temp.30 125/80 1.5/10.22 0.80 E125/80LUP 230 14.0 0.22 0.55/0. 240.0 0. 230/240 V.45 80/50 HM Ballast type Ballast Dimen.80/0.4 1 2 1. More information at: www.5 1 1 1.2013 1/1 .125/80 W 230.92) (kg) λ Δt (°C) 230 240 (W) 1) 12.15/0.03.62 E80/50LU Note: P in ballast type name means built-in thermal protector (eg.93) (p.22 0.50/0.0 0.15/0.6 1 2 1.45 125/80 1.Connec.0 12.55/0.45 125/80 1.50 70/60 10.0/10.80 E125/80LU 230 14.70/0.5 1 1 1.5/11.5/12.42 70/65 8.80 E125/80LU 230 240 13.Net Inductive sions tion weight 0.helvar.0/11.50 70/60 10.45/0. E80/50LUP) Helvar | Data is subject to change without notice.70/0.4/11.50 70/60 10.22 0.com Prev Next 1) Winding at 25 °C 84 Home T11 030 1G 18.E-LU / E-LUP Magnetic ballasts for high pressure mercury lamps 80/50 W .15/0.55/0. Connec.6 6 8 3.16 0.0 1.55 65 18.FP 2) 4) 5) 3.5 9 2.6 0.25 E 400 SE 4) 230 28.7 1 4 1.15 250 Ballast type Voltage Power losses Ballast Dimen.40 250 2.25 E 400 SE 4) 240 29.40 250 2.13 E 250 SE 3) 230 19.10 0.0 2.15 400 3.13 E 250 T.5 7 2.6 10 3.2 23.15 400 3.25 E 400 F 2) 4) 5) 240 26. More information at: www. 50 Hz • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime tw 130 & 140 Lamp type HM Lamp Lamp wattage Lamp current (W) (A) 125 1.60 65 25.0 2.Net Inductive sions tion weight Temp.86 0.0 10 5 3.0 2.15 3.25 E 400 TL 2) 4) 5) 4 11 3.55 70 10.0 0. 230/240 V.40 250 2.25 400 E 400 TLC 2) 4) 5) 12 3.55 18.56 25 2.93) (p.0 10 5 3.0 0.10 0.1 0.15 400 3.0 2 8 2.10 0.2013 1/1 85 .E-LU / LUP .25 400 E 400 TLPC 2) 4) 5) 4 10 3.15 400 E 400 TLC 2) 4) 5) 4 9 3.56 75 25. E-T / F Magnetic ballasts for high pressure mercury lamps 50-400 W 220.13 E 250 T 2) 4) 5) 240 23.6 27 29 29 31 29 31 4 3.1 0.7 0.com T11 045 1I 21.4 3 7 3.21 0.2 1 4 1.5 23.0 2.55 70 10.60 25.92) (kg) λ Δt (°C) 220 13.0 0.57 70 25 2.16 0.25 220 230 230 240 230 240 230 240 220 230 230 240 230 240 4 12 3.0 2.58 55 25 2.00 0.3 23.00 0.70 2.15 3) 65 70 55 60 55 60 65 70 65 70 Home Prev Next 1) Winding at 25 °C 2) T-type = two and four point fixing F-type = four point fixing 3) With push-in terminals 4) With screw terminals 5) Product has tw140 Note: P in ballast type name means built-in thermal protector (eg.helvar.25 E 400 T 2) 4) 5) 230 25.15 400 3.22 0.15 E 125 LU 125 1.13 E 250 SE 240 20.40 250 2.7 0.0 23.25 E 400 TP.16 0.F 2) 4) 5) 230 22. E400 TP or NK70LUPK) Helvar | Data is subject to change without notice.25 E 400 TLP 2) 4) 5) 22.0 1.40 400 3.0 8 5 1.25 E 400 TL 2) 4) 5) 4 9 3.15 3.86 0. 230.55 75 18.56 25 2.57 75 25.57 70 25 2.15 400 3.3 24.13 E 250 T 2) 4) 5) 230 240 22.4 26.59 25 2.60 70 25.0 8 5 1.0 1.15 400 3.55 70 18. 240. rise Compensation Parallel Ck Mains 230/250V current ±10 % (µF) (A) (W) 1) (p.03.15 400 3.0 2.0 1.0 2.0 1.2 25.3 24.55 75 18.70 E 125 LU 230 13. 0/0.Net Inductive sions tion weight Temp.56 70/50 1.22 0.5 18.6 16.0 19.75 NK 50 LUP 70 1.0 0.9 18.9 3 21 1.39/0.6 16.2 NK 100 LUP 100/70 1.43 70 1.9 1 15 1.22 0.40 75 20 0.38 0.0 1 29 1.0/8.5/11.27 0.39 70 12.43 220 230 230 240 230 240 230 240 230 240 230 240 230 240 20 21 21 22 21 22 3 18 1.9 18/11.22 0.0 1 15 1.56/0.39 65 12.5 9 15 2.0 0.0 1 28 1. 50 Hz • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime tw 130 & 140 Lamp type HS Lamp Lamp wattage Lamp current (W) (A) Ballast type Voltage Power losses Ballast Dimen.41/0.22 0.44 80 12.8 NK 150 TL 2) 150 1.6 1 13 1.38 75/60 12.8 NK 150 TLP 2) 150 1. rise Compensation Parallel Ck Mains 230/250V current ±10 % (µF) (A) (p.22 0.0 0.80 0.75 NK 70/50 LUP 100 1.41 75 20 0.0 1 13 1.0 19.0 0. 230/240 V.8 15.85 0.Connec. More information at: www.92) (kg) λ Δt (°C) 230 240 230 240 230 240 (W) 1) 12.9 18.0/8.22 0.0 NK 70 LU 240 15.0 NK 70 LU 70 1.43/0.0 NK 70 LUPK 240 14.0 0.9 3 22 1.0 NK 70 LUPE 230 240 16.0 0.2013 1/2 Home Prev Next .5 13 15 1.5 1 15 1.0 1 28 1.6 0.0 0.0 12.40 65 20 0.20 0.80 0.38 70 8.43/0.0 0.0 0.36 75 80 12.0 8 15 1.0 0.38 0.0 150 1.80 0.75 NK 70/50 LU 70/50 1.56 1 13 1.0 0.5 14. 230.18 0.2 NK 100 LU 100 1.22 0.0/11.38 75/60 12.41 75 20 0.33 1 13 1.0 16.40 75 20 0.helvar.22 0.5/11.0 NK 70 LUP 230 240 14.39 65 12.9/0.22 0.43 70 1. 220/230.com T11 034 1M 21.5 12.8 15.75 NK 50 LU 50 0.85 0.9 17.0/0.22 0.8 NK 150 SE 150 1.0 8 15 1.6 0.NK-LU / LUP / LUS / LUH / SEP Magnetic ballasts for high pressure sodium lamps 35-100 W 220.2/1. 240.8 NK 150 TL 2) 150 1.35 75/65 12.43 1 14 1. E400 TP or NK70LUPK) 86 Helvar | Data is subject to change without notice.0/12.43 50 0.6 15.03.43 70 1.43 70 1.43 70 1.0 12.37 60/35 20/12 0.33 1 15 1.22 0.0 0.0 15.5/11.5 14.8 NK 150/100 SEP NK 100/70 SEP 1) Winding at 25 °C 2) Product has tw140 3) Available also with bottom length 133 mm Note: P in ballast type name means built-in thermal protector (eg.38 70 8.0 NK 70 LUE 220 16.33 230 240 230 240 15.39 70 12.39 70 12.0 14.0 1 15 1.93) (p.0 0.33 230 14.41 75 20 0.44 80 12.0 0.5 19/12 10 30 2.39/0.0 NK 70 LUPK 230 240 230 240 13.39 75 12.56 230 14.8 NK 150 SEP 3) 150 1.8 NK 150 SEPK 150/100 1. 7 400 230 240 230 240 230 240 230 240 230 240 6 20 6. FEP 2)3) 4.4 250 3. More information at: www.com T11 034 1M 21.42 70 75 32 1.FP 2) 3) 4.4 250 3.3 NK 1000 F/2 2) 3) 4) 230 240 75 80 7 20 8.42 65 32 1.F 2) 3) 18 3.0 NK 250 SEP 230 240 29 30 10 15 3.0 NK 250 TLPC 2) 3) 4 22 3 0.helvar.0 1000 10. NK-T / F Magnetic ballasts for high pressure sodium lamps • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field 150-1000 W 220/230.7 22 3.4 250 3. 230.2 4.40 50 2.75 0.4 NK 400 TEP.15 0.F 2) 3) 18 4.0 NK 250 TLPK 3) 28 29 25 26 26 27 26 27 28 29 29 30 30 32 30 32 3. FE 2) 3) 4. Parallel Ck Mains 230/250V current rise ±10 % Δt (°C) (µF) (A) (W) 1) (p.47 75 65 3.0 NK 250 T.42 70 32 1.7 21 3.Connec.4 NK 250 SE 240 30 10 23 3.43 32 1.6 250 230 240 220 230 230 240 230 240 230 240 220 230 230 240 230 240 3 19 2.7 19 4.38 80 32 1.0 NK 250 T 230 28 3.0 NK 250 SE 250 3.0 NK 250 TLK 3) 3 21 2.15 0.4 3.4 0.38 75 80 32 1.93) (p.00 0.4 250 3. 240.4 250 3.Net Inductive losses sions tion weight Compensation Temp.75 0.2 400 4.43 75 32 1. 230/240 V.4 NK 400 TE.00 0.6 19 3.0 NK 250 TLPC 2) 3) 4 21 3 0.00 0.3 5.6 0.42 65 32 1.0 NK 250 TLK 3) 3 18 2.4 0.3 0.92) (kg) λ 230 29 10 23 3.40 70 32 1.6 0.03.F 2) 3) 230 32 4. Note: P in ballast type name means built-in thermal protector (eg.4 3.7 16 4.2013 2/2 87 .0 NK 250 TP.NK-SE / SEP.2 600 6.44 65 32 1.4 0.2 NK 600 SE 230 43 14 23 6.0 NK 250 TLC 2) 3) 4 18 3 0.44 75 80 65 3.42 70 75 32 1.43 32 1.4 250 3.0 600 6.40 50 2.4 NK 400 TP. 50 Hz • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime • Multiple fixing point variations tw 130 & 140 Lamp type HS Lamp Lamp Lamp wattage current Ballast type (W) (A) 250 3.0 2) 3) 75 80 75 80 70 70 75 70 75 Home Prev Next 1) Winding at 25 °C 2) T-type = two and four point fixing F-type = four point fixing 3) Product has tw140 4) Supplied as 2 identical ballasts both with the dimensions indicated.45 80 100 5.15 0.4 400 4.4 250 3.4 250 3.75 0.9 0.2 400 4.6 16 3.0 250 Voltage Ballast Power Dimen.40 50 2. NK400 TP or NK600 SEP) Helvar | Data is subject to change without notice.4 NK 400 T.8 0.FP 2) 3) 3.4 NK 400 T.41 75 50 2.2 NK 600 T/2 2) 3) 4) 32 33 32 33 35 36 35 36 60 62 4.41 75 50 2.2 400 4. All other technical values are stated for the combined product operating one lamp. Connec.40 75 50 2.0 0.com T11 052 1C 18.4 0.4 NK400/50% TP 4) 434 288 ~50% 34% 4 24 4.85 0.22 0.41 75 12. NK-SEP. NK-TP Power reduction ballasts for high pressure sodium lamps 50 .93) (p. together with a power reduction switch. Measurement results may vary from lamp to lamp 4) Product has tw140 Note: P in ballast type name means built-in thermal protector (eg. 50 Hz • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime tw 130 &140 (A) 50 0.33 ~50% 29% 1 24 1.92) (kg) λ Δt (°C) (µF) (A) 37% 1 24 1.22 0.0 0.0 NK70/50LUP 2) 84 59 100 1.0 0.38 70 8.56 166 107 ~50% 36% 8 24 1.39 75 12. Lamps must always be ignited with the higher rated wattage of a ballast and not switched down to reduced wattage before 10 minutes of normal operation after the ignition of a lamp.27 0.helvar. see page 86 3) Measured with a certain operating lamp openly mounted.90 NK250/50% SEP 274 171 ~50% 38% 12 24 3. 88 Helvar | Data is subject to change without notice. NK100/70SEP) Operating instructions The circuit power can be reduced by using a power reduction ballast with extra tapping for higher impedance.400 W 230 V.43 75 20 0.04.2 1) 1) Not ENEC approved 2) Can also be used as a bi-power ballast.2 NK100/70SEP 2) 115 150 1.4 0. Parallel Mains flux (Φ) power sions tion weight rise Ck current reduction reduction 230/250V ±10 % Full HS Ballast type Lamp wattage Lamp type Lamp (W) (W) 1) 63 40 ~50% 1.NK-LUP.8 NK150/50% SEP 250 3.4 (p.0 400 4.41 75 32 1.75 NK50/35LUP 70 Reduced Lamp current (W) Circuit power 3) Ballast Compensation Luminous Circuit Dimen. More information at: www.2012 1/1 Home Prev Next .Net Inductive Temp.43 79 ~50% 32% 13 24 1. 0/12.0 0.Connec.4 12 12.8 NK 150 TL 150 1.0 1 15 1.33 70 1.18 0.9 3 21 1.0/0.39 65 12.76 NK 50 LUP 6) 6) 70/50 1.0 NK 100/70 SEP 150 1.8 NK 150 SEP 4) 5) 150 1.38 50 6.0 NK 70 LUPE 15 1.35 75/65 12.44 80 12.5 12 12.NK-LU(P) / SE / SEP(K) / TL(P) Magnetic ballasts for metal halide lamps 35-150 W 220/230 V.Net Inductive losses sions tion weight Temp.2013 1/2 89 .0/11.23 1 13 1.85 0.22 0.56 230 14.41 75 20 0.36 75 80 12.53 NK 35 LUP 50 0.43 1.0 9.27 0.0 16.0 1 28 1.43 220 230 230 240 230 240 230 240 230 240 20 21 21 22 21 22 18. NK70LUPK) Helvar | Data is subject to change without notice.5 1 15 1.6 1 100 230 240 230 240 1 13 1. 50 Hz • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime • Multiple fixing point variations tw 130 & 140 Lamp type Lamp Lamp Lamp wattage current (W) HI Ballast type Voltage (A) 35 0.0 0.0 0.5 13 13 1.1/1.0 NK 70 LUP 230 240 14.40 65 20 0.41 75 20 0.80 0.22 0.5/11. 230/240 V. rise Compensation Parallel Ck Mains 230/250V current ±10 % (µF) (A) (p.9 100/70 1.22 0.43 70 1.22 0.43 70 1.1 NK 100 LUP 16.22 0.93) (p.0/0.0 NK 70 LU 240 15.0 0.39/0.0/8.39 75 12.0 0. 230.39 70 12.5 3 18 1.76 NK 70/50 LU 6) 70/50 1.43 70 1.0 NK 70 LUE 220 16.9 15.0 0.6 0.0 1 15 1.0 0.38 70 8 0.22 0.43 70 1.03.40 75 20 0.0 1 29 1.5 18.22 0.8 NK 150 SEPK 4) 2) 3) Home Prev Next 1) Winding at 25 °C 2) T-type = two and four point fixing F-type = four point fixing 3) Product has tw140 4) With push-in terminals 5) Available also with bottom length 133 mm 6) 50 W : Only suitable with CDO lamps Note: P in ballast type name means built-in thermal protector (eg. More information at: www.0 0.76 NK 50 LU 50 0.0 0.0 19.39 65 12.40 75 20 0.22 0.8 NK 150 TL 2) 3) 150 1.80 0.20 0.9 8 15 1.41/0.0 0.5/11.33 230 14.5 14.6 16.56/0.0 17.8 NK 150 TLP 2) 3) 150 1.0 15.43/0.5 14.22 0.43 70 1.43/0.80 0.0 1 28 1.8 15.38 0.0 0.22 0.33 1 15 1.39 70 12.76 NK 70/50 LUP 6) Ballast Power Dimen.0 NK 70 LUPK 230 240 13.5/11.33 1 14 1.38 70 8 0.com T11 037 1M 21.0 NK 70 LUPK 240 14.0 1 15 1.9 3 22 1.38 75/60 12.38 75/60 12.92) (kg) λ Δt (°C) 230 240 230 240 230 240 230 240 (W) 1) 9.helvar.0/8.39/0.9 9 15 2. 0 Ballast type NK 250 TLK 5) Voltage Ballast Power Dimen.Net Inductive losses sions tion weight Temp.5 E 400 SE 240 30.6 0.00 0.4 3 18 2.4 29 30 28 29 10 15 3.75 0.18 0.5 H 400 TP 2) 5) 35 2. FEP 4.2 400 3.4 250 3.5 E 400 TP.5 400 E 400 TLPC 2) 5) 32 33 35 36 35 36 24.15 4 22 3.3 24.55 75 35 2.4 3.15 4 20 8.9 26 24.1 0.75 0.6 1) Winding at 25 °C 2) T-type = two and four point fixing F-type = four point fixing 3) Supplied as 2 identical ballasts both with the dimensions indicated All other technical values are stated for the combined product operating one lamp 4) Check lamp manufacturers data to ensure they specify that the lamp is suitable for HPS ballast 5) Product has tw140 Note: P in ballast type name means built-in thermal protector (eg.4 32 1.2 23.15 220 230 230 240 230 240 230 240 230 240 27 29 29 31 29 31 25 26 75 80 4 18 3.15 0.2 400 3.0 NK 250 TLPK 5) 250 3.7 0.5 H 1000 F/2 2) 4) 5) 2)4)5) 2) 5) 2) 5) 5) 5) 2) 3) 5) 3.1 NK 400 TE.Connec.75 0.0 NK 250 SE 250 3.40 70 32 1.2 4.5 E 400 SE 230 29.2 400 4.1 NK 400 TP.49 80 35 2.38 80 32 1.7 0.0 NK 250 SE 230 250 3.55 65 35 2.42 70 75 32 1.43 75 80 75 80 29 10 23 3.3 24.15 4 21 3.7 400 230 240 230 240 230 240 230 240 230 240 220 230 230 240 230 240 400 3. 50 Hz • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime • Multiple fixing point variations tw 130 & 140 Lamp type HI Lamp Lamp Lamp wattage current (W) (A) 250 3.0 10 23 3.53 35 2. NK-TE.5 E 400 TL 5) 400 3.4 240 30 10 23 3.16 0.00 0.41 75 45 2.49 80 35 2.53 65 35 2.15 3.2 4.16 0.49 80 35 2.2 400 3.5 400 E 400 TLC 2) 5) 3.15 4 18 3.4 32 1.16 0.38 80 32 1.0 10 23 3. E400 TP or NK70LUPK) 90 Helvar | Data is subject to change without notice.6 0.0 NK 250 SEP 250 3.51 80 35 2.5 400 E 400 TLC 3.5 E 400 F 2) 5) 400 3.48 3.1 0.0 NK 250 TLK 5) 250 3.5 23.0 0.41 75 45 2.15 25 3 16 3.5 E 400 TLP 400 3.com T11 037 1M 21.6 18 3.2 3.9 26 22.FP 2) 5) 230 240 230 240 400 3.53 65 35 2. FE 4.00 0.93) (p. H-F/2 Magnetic ballasts for metal halide lamps • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field 250-1000 W 220/230 V.0 NK 250 TP.49 85 100 4.NK-SE.5 H 400 T 35 2.3 23.7 21 3.18 0.FP 2) 5) 1000 9. E-T / F. 230. rise Compensation Parallel Ck Mains 230/250V current ±10 % (µF) (A) 220 230 230 240 230 240 (W) 1) 29 30 30 32 30 32 (p.8 0.53 75 80 75 80 35 2.00 0.15 240 26 6 16 3.2 400 4.6 0.6 22 3.5 E 400 TL 400 3.15 4 19 3.6 19 3.7 22 3.43 75 32 1.40 0. More information at: www.49 80 35 2.92) (kg) λ Δt (°C) 3 21 2.helvar.5 E 400 T 2) 5) 230 400 3.6 22 3.1 NK 400 TEP.00 0. NK-T(P) / F.40 70 75 45 2. 230/240 V.FP 2) 4) 5) 19 4.03.48 70 75 70 75 4 21 3.2013 2/2 Home Prev Next .43 3 19 2. com T11 059 1E 21.8 NK 250 SEL 220 27 10 23 2.93) (p.7 25 4.40 70 50 2. Check lamp manufacturers data to ensure they specify that the lamp is suitable for HPS ballast 6) NK-output for high pressure sodium lamps.42 80 32 1.4 NK 400 T 2) 5) 7) 220 31 4.4 220(NK) 220 (H) 6) 70 60 4 20 8. rise Compensation Mains Parallel Ck 230/250V current ±10 % (µF) (A) (W) (A) 150 1. E-T/F Magnetic ballasts for high intensity discharge lamps 150-1000 W 220 V.5 400 E 400 TL 2) 7) 220 27.8 0.49 80 70 100 5.1 0.2 1000 10.15 Home Prev Next 1) Winding at 25 °C 2) T-type = two and four point fixing F-type = four point fixing 3) Supplied as 2 identical ballasts both with the dimensions indicated All other technical values are stated for the combined product operating one lamp 4) With push-in terminals 5) Can also be used with certain 400 W HI-lamps. H-output for metal halide lamps 7) Product has tw140 Note: P in ballast type name means built-in thermal protector (eg.03.2 400 4.43 75 50 2.5 4 17 3.0 0.92) (kg) λ Δt (°C) ConnecNet Inductive tion weight Temp.45 80 100 5.8 0.6 0.3 NK 1000 F/2 3) 7) 220 72 7 27 8.45 0. NK 250 TP or NK 250 FP) Helvar | Data is subject to change without notice.6 0.40 75 20 0.0 NK 250 T 2) 7) 220 27 3. 50 Hz • Meets EN 61347-2-9 & EN 60923 requirements • Very low magnetic field • 100 % quality controlled • Low power losses • Low harmonics • Low noise • Long lifetime tw 130 & 140 HS / HI Lamp Lamp Lamp Lamp type wattage current HS Voltage Power losses (W) 1) (p.5 NK/H 1000 T/2 3)7) 6) 400 4.3 3.42 70 32 1.53 75 35 2. More information at: www.helvar.4 250 3.6 25 3.9 250 1.8 NK 150 SE 4) 220 18 11 23 1.4 NK 400 TE 5) 7) 220 32 4 26 3.8 0.3/9.NK-T/F.0 1000 HI Ballast type Ballast Dimensions 10.2013 1/1 91 . NK-SE/L.4 0. com 28 T11 053 1D 06.Connection diagrams HID-ballasts 1 2 3 4 5 6 7 8 9 10 11 12 Home Prev 13 14 15 16 17 18 19 20 21 22 23 24 Next Ф ~50% Power reduction switch 92 25 26 29 30 27 Helvar | Data is subject to change without notice.03. More information at: www.helvar.2012 1/2 . 400F H400F NK250F NK400T/F.03.5 160 c F-Type Home Prev d e c Next d f c da b a b Delivery information Ballast E-LU. More information at: www.2012 2/2 93 .) (kg) 432 960 527 . E-LUP E…LU/LUP/LUS NK …LU/LUP/LUS E250 .5 120 T-Type 13 f 112 69 53 95 14 e 173 104 90.helvar.1170 432 Pallet height (cm) 50 960 527-1170 50 5 300 530-750 48 4 240 530-1060 48 4 3 360-450-630 820-910 50-55 2 200 710 54 760-1060 48 2* Helvar | Data is subject to change without notice.F/2 NK1000 T.F/2 H1000 F/2 Unit package Minimum Plastic Carton delivery binding box amount strip EURO pallet 1200 x 800 4 Transportation package One-way One-way Pallet pallet pallet weight 730 x 650 730 x 1120 (pcs.5 95 2 3 4 5 6 b b b c c 135 135 165 104 104 70 70 70 70 70 85 85 85 85 85 120 120 150 90 90 35 35 35 90 90 85 108 138 85 108 80 80 a b 7 8 9 c d d 135 145 160 70 69 69 85 53 53 100 120 140 100 138 90 10 d 180 69 53 155 11 d 133 69 53 120 12 e 133 104 90.) (pcs.400T H400T NK250T E250 .Dimensions NO.com 120 (240) T11 053 1D 06. NK400/50% TP E…SE/SEP NK100/70SEP NK150-250SE/SEP NK250/50% SEP NK600 T. DRAWING LENGTH 'a' (mm) WIDTH 'b' (mm) HEIGHT 'c' (mm) 'd' (mm) 'e' (mm) 'f' (mm) 'g' (mm) 1 a 114 54 45. 0 (25 °C.5 4.6 A) < 4. More information at: www.0 (25 °C. Check also lamp manufacturer information of proper ignitor selection.0 (25 °C.3 Impulse width (µs) 2 (1. 4. ambient temperature (°C) -30 -30 -30 -30 -30 -30 130 130 160 230 430 88x34x28 92x34x28 92x38x32 92x43x36 108x55x43 High pressure sodium (W) 35-70 Ceramic metal halide 1) Max.0 (2.. contin...4 (2.6 6.6 A) < 3..5 4.8 4. 4. 50-60 Hz • Fully electronic • Super-imposed pulse type • Compact design • Solid metal fixing screw • Low inherent heating • High thermal resistance • Low power losses • ENEC approved* tw 130 L-70 L-150 HI-400M HI-400S L-600 L-1000S 2) 70(DE) 3) -150 70(DE) 3) -400 70(DE) 3) -400 70(DE) 3) -600 70(DE) 3) -1000 Metal halide 1) (W) - 35-150 35-400 35-400 35-400 35-1000 (W) - 35-150 35-400 35-400 35-400 35-400 1 1...0 . load capacitance (pF) 200 Internal losses (W) Weight (g) < 1. 1.0 kV) 60-90 / 240-270 60-90 / 240-270 60-90 / 240-270 60-90 / 240-270 60-90 / 240-270 60-90 / 240-270 2 3 3 3 3 3 100 100 100 100 100 < 1.5 4.helvar.0 kV) 1.0 .5 (2. 6. 2.07.8 A) < 3..2 (2.4 (25 °C.com T17 007 1J 24. 4.0 kV) 1.5 1.0 . 12 A) Max.5 A) < 6.3 (25 °C.5 4. lamp current (A) Operating voltage (V) Cut-out voltage (V) Ignition voltage (kV) 1. housing temperature (°C) 105 105 105 105 105 105 Min... 1 A) 130 Dimensions AxBxC(mm) 88x34x28 Note: Suitability for lamps refers to most common lamps acc.. 4. dimensions and connection on page 68 2) L-1000S is not ENEC approved 3) DE means double ended lamp Minimum delivery amount 50 pcs.6 4.. 4.Electronic superimposed pulse ignitors Without timer 220-240 V. 4.2012 1/1 Home Prev Next .0 (25 °C. 94 Helvar | Data is subject to change without notice. Not suitable for lamps with low ignition voltage (~1 kV) 1) See also recommended combinations. to EN standards.0 kV) 1.0 (2.5 kV) Phasing (°el) Pulses per half cycle Max.0 .0 .0 kV) 1.5 12 198-264 198-264 198-264 198-264 198-264 198-264 ≤ 170 ≤ 170 ≤ 170 ≤ 170 ≤ 170 ≤ 170 4..9 . 4. . 6.8 A) 105 100 <3.6 A) 105 100 <3.com T17 008 1G 05. EN 55014 Helvar | Data is subject to change without notice. 4.1..0 . 4.7 (2. housing temp. lamp (A) 1 current Cut out time (min) 2 Operating voltage (V) 198-264 198-264 Cut-out voltage (V) ≤ 170 ≤ 170 Ignition voltage (kV) 1..5 1..9 (2.. EN 60927. 4..0 (25 °C.5 .6 6.0 kV) 60-90 / 240-270 3 100 <1. contin. 12 A) 105 Min.0 kV) 60-90 / 240-270 3 1.5 4.5 3.0 (2.Electronic superimposed pulse ignitors With timer 220-240 V. 4.0 (25 °C..0 kV) 60-90 / 240-270 3 1.0 Internal losses (W) (25 °C..0 kV) 60-90 / 240-270 3 1. load capacitance (pF) 200 <1.03.5 kV) 60-90 / Phasing (°el) 240-270 Pulses per half cycle 2 Max.0 (25 °C. 4.0 kV) 60-90 / 240-270 3 0.5 A) 105 100 <6.0 .5 12 20 18 DIGITAL 1) DIGITAL 1) 18 198-264 198-264 198-264 198-264 < 170 < 170 Max. 1A) Max. 50-60 Hz • Fully electronic • Super-imposed pulse type • Compact design • Solid metal fixing screw • Low inherent heating • High thermal resistance • Low power losses • ENEC approved tw 130 LSI-70T1 LSI-150T20 LHI-400ST10 LSI-400ST20 LSI-600T20 LSI-1000T10 2) High pressure sodium (W) 35-70 70(DE) 3) -150 70(DE) 3) -400 70(DE) 3) -400 70(DE) 3) -600 70(DE) 3) -1000 Metal halide 1) (W) - 35-150 35-400 35-400 35-400 35-1000 Ceramic metal halide 1) (W) - 35-150 35-400 35-400 35-400 35-400 1.0 .4 (2.6 4...9 . 3) DE means double ended lamp Minimum delivery amount 50 pcs. More information at: www. (°C) -30 -30 -30 -30 -30 -30 Weight 130 160 160 230 460 88x34x28 92x38x32 92x38x32 92x43x36 108x55x43 Impulse width (µs) 2 (1. Check also lamp manufacturer information of proper ignitor selection.5 4. (°C) 105 (g) 130 Dimensions AxBxC (mm) 88x34x28 Home Prev Next Note: Suitability for lamps refers to most common lamps acc. dimensions and connection on page 68 2) LSI-1000T10 is not ENEC approved. 4..8 4.5 4. ambient temp.0 .0 (25 °C. Additional specifications and cut-out sequence for LSI-400ST20 & LSI-600T20 • Intelligent timer with µC for light source protection and energy saving operation • Protective against power-line overvoltage • Lamp protection during ignition • Continous lamp-state check • Stable ignition over a wide temperature range • Radio-frequency interference level 10 % to standard timed version • Long life performance • Approval to EN 61347.2 (2. 2. 4.Not suitable for lamps with low ignition voltage (~1 kV) 1) See also recommended combinations.2012 1/1 95 .helvar.6 A) 105 100 <4.. to EN standards.3 (25 °C.3 ≤ 170 ≤ 170 4. helvar.and metal halide lamps Ignitor Watt 35 HIGH PRESSURE SODIUM 50 70 CERAMIC METAL HALIDE 100 150 250 400 600 1000 35 70 HI-400M 2) HI-400S 100 150 250 400 METAL HALIDE 1) 35 70 2) 2) 2) 2) 2) 2) 2) LHI-400ST10 2) 2) 2) 2) LSI-400ST20 2) 2) 2) 2) 100 150 250 400 1000 L-70 LSI-70T1 L-150 LSI-150T20 L-600 2) 2) 2) 2) 2) 2) 2) 2) LSI-600T20 2) 2) 2) 2) 2) 2) 2) 2) L-1000S 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) LSI-1000T10 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) Home Prev Next Recommended combination T1 Automatic cut-out 2 min T10 Automatic cut-out 18 min T20 Automatic cut-out 20 min Note: Suitability for lamps refers to most common lamps acc.5 mm2 max Helvar | Data is subject to change without notice. 1) Not suitable for lamps with low ignition voltage (~1 kV) 2) Used combination Dimensions Connection 96 Ignitor L-70 L-150 HI-400M HI-400S L-600 L-1000 / L-1000S LSI-70T1 LSI-150T20 LHI-400ST10 LSI-400ST20 LSI-600T20 LSI-1000T10 A X B X C (mm) 88x34x28 88x34x28 92x34x28 92x38x32 92x43x36 108x55x43 88x34x28 88x34x28 92x38x32 92x38x32 92x43x36 108x55x43 Terminals: 3-pole D-L-N 2.Helvar ignitors for high pressure sodium. More information at: www.com T17 006 1K 24. Check also lamp manufacturer information of proper ignitor selection.12. to EN standards.2012 1/1 . Home Prev Next Helvar | Data is subject to change without notice. More information at: www.helvar.com 97 . 500V rated lampholders are required for T5 lamps) Ballast mounting position • Ensure that the entire length of the ballast lies against a flat surface to ensure good heat dissipation 98 Helvar | Data is subject to change without notice.g. lamp wiring and low voltage control wiring separate from each other • Do not run hot and cold lamp wires bunched together • Lamp wires of two or more separate ballast should not be run together • For reliable starting (and electrical safety) all metal parts of the fitting must be at the same electrical potential as the ballast case Reflector position • Placing a reflector or metal plate very close to the lamp may increase RFI emissions and cause excessive leakage current of the fitting • See lamp standards for recommendations Fitting components • Ensure the correct electrical ratings for the lamps are used (e.2013 1/2 Home Prev Next .75 mm²) Wiring insulation • All other Helvar electronic ballasts require a functional earth to be connected to ensure reliable operation • According to recommendations in EN 60598 Maximum tc temperature Maximum wire lengths • Reliable operation and lifetime is only guaranteed if the maximum tc point temperature is not exceeded under the conditions of use • See Characteristics table Frequent switching Wire connections • As shown on the ballast label and the Wiring Diagram datasheets Wire preparation • Helvar warm start ballasts may be used in conjunction with occupancy sensors (PIR) as long as the ‘OFF’ period is greater than 1 minute. More information at: www.04. Specifications of the control gear shall not be exceeded when it is used in the luminaire in the actual operating conditions. Safe and reliable operation of the components requires that the luminaire complies with the relevant standards and regulations (e. moisture and pollution.5 mm ± 1 mm Master / Slave connection Wiring capacitance • Not advised • 80 pF / metre (max.0. However to ensure full EMC compatibility a functional earthing might be required Wire cross section dimensions • 0.helvar. Wiring considerations Installation & operational considerations Wire type Ballast earthing • Solid core conductor only • EL-s.electronic ballasts for fluorescent lamps Helvar ballast and ignitors are designed to be built into luminaires. EL-es and EL-TCs ranges operationally suitable for both Class I & II fittings (no earth required).1. Frequently used ‘OFF’ periods shorter than 1 minute may reduce lamp life • Strip length 7. The luminaire manufacturer remains responsible for the correct choice and installation of the control gear according to the application. EL-ngn5.5 . for adviced wire lengths) Switching off one lamp via lamp wires Wire insertion force • Not permitted • 8 Newtons (typical) Starting aid Wire release from ballast • For a reliable lamp ignition the use of metal starting aid is recommended • (See detailed release instructions on page 108) Wiring layout • Keep all wiring as short as possible (particularly the ‘Hot’ wires see Wiring Diagrams datasheets) • ‘Hot’ wires should be of equal length • ‘Cold’ wires should be of equal length • Always run mains wiring.com O07 082 1N 06. The luminaire shall be designed to adequately protect the control gear from dust.5 . EL-ngn.5 mm² (EL-s-u 0.Instructions for use .g. IEC 60598-1). The ballast shall not be used outside the luminaire. with all 4 poles being used to disconnect the lamp. • 'Type B’ MCB’s are not recommended due to their sensitivity. or by replacing the faulty lamps. the exact operating state of the ballast under other lamp fault conditions depends on the specific failure. The ballast will then switch off the supply to the lamps to prevent unnecessary stress to the circuit. The energy spikes from magnetic ballasts may damage electronic ballasts. like sensors and control devices. • Disconnect the mains supply from the ballast before disconnecting the emergency lamp.2013 2/2 99 .electronic ballasts for fluorescent lamps Installation & operational considerations Class II luminaires: Helvar electronic ballasts can be used in suitably designed class II luminaires. Mixed technology on the same electrical circuit • Do not mix magnetic and electronic ballasts on the same electrical circuit. More information at: www. but also infra-red light. the ballast will recognise that a lamp/s has reached the end of its useful operational life.Instructions for use .2. Emergency inverter unit recommendations • Use a 4 pole changeover device. all Live phases and Neutral must be connected together before the test is carried out. and prior to the lamps connection to the emergency unit.com O07 082 1N 06.helvar. • If the lamp electrical characteristics (e. Site considerations Home Prev Next Insulation resistance testing on an installation • Carry out insulation resistance testing with the fittings disconnected from the mains supply (the fitting has already been tested by the manufacturer) • If fittings are connected to the mains supply during an insulation resistance test. For other units. To guarantee successful functionality the manufacturer of the IR system should be contacted prior to installation. The ballast will not be harmed under any normal lamp failure condition. the total system compatibility must be ensured at the system design / integrator stage. the compatibility assurance is in process. • Reconnect the emergency lamp to the ballast before applying the mains supply. Ballasts can be reset from stand-by either by switching the mains supply off and then on. Emergency inverter units Due to our continuing program of product development and improvement.g. As such. Lamp ‘end of lifetime’ • Behaviour of the ballast at end of lamp life time: IEC 61347-2-3 17. • Do not disconnect the Neutral conductor unless the supply is off. Stand-by function The stand-by function is designed specifically as a protection for the ballast. This can lead to unreliable starting or uneven light distribution from the lamp. It will switch the lamps off when an ‘end of lifetime’ condition occurs. 3-phase supplies • Do not apply power to the ballast / fitting without the Neutral conductor connected. the wiring lengths for emergency and non-emergency lamps should be equal. • Ensure correct reconnection before the mains supply is reapplied. Lamps can also fail in many other ways. • For multiple lamp ballasts. If used. This natural evolution may affect compatibility between our electronic ballasts and emergency conversion modules. Infra-red (IR) system • Fluorescent lamps emit not only visible light.04. Helvar | Data is subject to change without notice. Until the standard for these is finalised. The following points must be very carefully noted: • EL-sc and EL-iDim / EL-iDim-c ballasts must have functional earth connected • Luminaire standard EN 60598 provides full details of the requirements for class II luminaires • Starting aid may be required for reliable operating and EMC performance Lamp “burn in”: Brand new lamps may occasionally have an uneven distribution of internal gases. Helvar ballasts typically operate at frequencies rarely used in IR applications. lamp voltage) exceed the ballast internal preset values. To minimise problems the IR system should have a reduced receiving area. Miniature Circuit Breakers (Please refer page 102) • ‘Type C’ MCB’s with trip characteristics in according to EN 60898 are recommended. Helvar recommend that new lamps are operated at full output (“burnt in”) for 100 hours prior to being dimmed. DALI controls: The DALI standard currently governs only ballast compatibility. In some cases this may cause interference to IR systems. emergency unit supplier and/or system integrator to ensure the used combination is fully compatible. Helvar ballast designs are evolving constantly. It is therefore the responsibility of either the fitting manufacturer. load only to 60 % of the equivalent ‘Type C’ MCB. com O10 134 1E 13.magnetic ballasts & ignitors Helvar ballast and ignitors are designed to be built into luminaires.5 .0 .0 mm ± 1 mm Wire connections • As shown on the ballast label and the Wiring Diagram datasheets Mineral insulated cable • Not advised Home Wire release from ignitor • Flat blade screwdriver Wiring layout • Keep wiring from the ignitor to the lamp as short as possible Wire release from ballast • Push in terminals: Use a 1 mm² solid pin (or similar) • Screw terminals: Flat blade screwdriver More detailed release instructions on page 108 Wiring layout Keep all wiring as short as possible • Mains wiring and lamp should always be kept as far as possible from each-other • Mains wiring should not be bunched together with lamp wiring • Avoid wiring ‘loops’ (to minimise magnetic coupling effect) • Avoid long parallel cable runs 100 Helvar | Data is subject to change without notice. IEC 60598-1).5.5 .0 mm² or 2.5 .3. Fluorescent and HID lamp ballasts 2.Instructions for use .0 mm ± 1 mm Wire preparation • Strip length 7. moisture and pollution.0 mm² (depending upon ignitor type) • 2. The luminaire manufacturer remains responsible for the correct choice and installation of the control gear according to the application.g.2010 1/2 . Ignitors for HID lamps Wire type • Push in terminals: • Screw terminals: Wire type • Solid core or stranded conductor Solid core conductor only Solid core or stranded conductor Wiring insulation • According to recommendations in EN 60598 Wire cross section dimensions • Push in terminals: 0.3. Safe and reliable operation of the components requires that the luminaire complies with the relevant standards and regulations (e. The ballast shall not be used outside the luminaire. Wiring considerations 1.0 mm Mineral insulated cable • Not advised • Screw terminals: Strip length 7. More information at: www. Specifications of the control gear shall not be exceeded when it is used in the luminaire in the actual operating conditions. The luminaire shall be designed to adequately protect the control gear from dust.0 .5 mm² for HID lamp ballasts) • Screw terminals: 1.5 .0 mm² Wiring insulation • According to recommendations in EN 60598 Wire cross section dimensions • 1.0 mm² (0.9.0 mm² (1000 W ignitors) Prev Wire connections • As shown on the ignitor label and datasheet Next Wire preparation • Push in terminals: Strip length 8.5 .1.02.1.4.helvar. Instructions for use - magnetic ballasts & ignitors Installation & operational considerations Ballast earthing • Required for safety Lifetime • Reliable operation and lifetime is only guaranteed if the maximum winding temperature of tw 130 ºC is not exceeded under the conditions of normal use Ballast mounting • The ballast must be located in such a position as to ensure that its maximum winding temperature of tw 130 ºC is not exceeded under the conditions of normal use • Mount the ballast against a flat surface to ensure good heat dissipation Starting aid • For reliable starting (and electrical safety) all metal parts of the fitting must be at the same electrical potential as the ballast case Fitting components • Ensure the correct electrical ratings for the lamps being used Ignitor choice • Helvar ballasts for Metal Halide or High Pressure Sodium lamps are only suitable for use with superimposed pulse type ignitors • Pulsar type ignitors (where a high starting voltage is applied to the ballast windings) are not suitable for Helvar ballasts. If used, the ballast winding insulation will be subjected to increased load. This will drastically shorten the ballast lifetime Noise avoidance • Ensure the ballast is securely fixed within the luminaire • Fix the ballast at a minimum distance of 3mm from the side of the fitting • Ensure that the fitting is of rigid construction (especially at the point where the ballast is fitted) • In large fittings the ballast should be separated from the fitting by mounting it on an aluminium plate (approx. 2 mm thick) • Mount as few ballasts as possible in one fitting • If using multiple ballasts in a fitting, ensure that the ballasts are mounted as far as possible from each other Site considerations Mixed technology on the same electrical circuit • Magnetic and electronic ballasts should not be connected to the same electrical circuit. The energy spikes produced by magnetic ballasts may result in damage to the electronic ballasts Miniature Circuit Breakers • ‘Type C’ MCB’s having trip characteristics in accordance with EN 60898 are recommended. • ‘Type B’ MCB’s are not recommended due to their sensitivity. If used, they must only be loaded to 60 % of the equivalent ‘Type C’ MCB Home Prev Next Reflector position • Situating a reflector or metal plate very close to the lamp may increase RFI emissions and cause excessive leakage current of the fitting Protection against lamp rectification • Metal Halide & High-Pressure Sodium lamps can begin to rectify as they reach the end of their operational lifetime. This can cause excessive temperature in a fitting. As such, it is recommended that thermal protection be fitted in these luminaires • A thermal protection device should be fitted inside the luminaire • Helvar ballasts for Metal Halide & High-Pressure Sodium lamps are available also with internal thermal protectors (P-types) • Use of ignitors with a timer facility also provide some protection against lamprectification. Use in conjunction with a thermal protector Helvar | Data is subject to change without notice. More information at: www.helvar.com O10 134 1E 13.02.2010 2/2 101 Quantity of control gear for miniature circuit breakers (MCB’s) Type C MCB’s are strongly recommended to use with fluorescent lighting. - Other types can prove unsuitable due to their tripping properties. - Practical quantities will depend strongly on the reactance of the actual circuit. Conversion table for other types of Miniature Circuit Breaker MCB type Relative quantity of ballasts B 10 A 37 % B 16 A 60 % B 20 A 75 % C 10 A 62 % C 16 A 100 % (see tables) C 20 A 125 % I (A) Ipeak ½ Ipeak T (ms) Δt Quantity of LED control gear for miniature circuit breakers (MCB’s) Quantity of drivers per miniature circuit breaker 16 A Type C LL1x6-U-CC LL1x20-U-CC LC1x30-E-CC LC1x30-E-DA LC1x30-E-AN OL1x60-E- CC OL1x100-E-CC1 OL1x100-E-CC2 LC50-U-DX3 LL1x70-E-CC LL1x70-E-DA LL2x35-E-CC Based on ICont 220 100 74 73 73 39 20 19 41 32 31 30 Based on Ipeak 220 100 74 73 73 18 13 12 41 32 31 30 Typical inrush current Ipeak (A) 2.5 7.6 6.2 6.7 7 50 26 25 7 32 33 40 1/2 value time Calculated energy Δt (µs) 45 25 25 26.4 27 270 610 690 56.0 152.0 148.0 186.0 Ipeak2Δt (A2s) 0.0003 0.001 0.000901 0.0011 0.0011 0.3736 0.29240 0.28890 0.00120 0.115800 0.146500 0.219800 102 Helvar | Data is subject to change without notice. More information at: www.helvar.com Home Prev Next O07 089 1I 25.03.2013 1/6 Quantity of control gear for miniature circuit breakers (MCB’s) EL-iDim Lamp(s) 1x14 T5 2x14 T5 4x14 T5 1x21 T5 2x21 T5 1x24 T5, TC-L 2x24 T5, TC-L 1x28 T5 2x28 T5 1x35 T5 2x35 T5 1x36 T8, TC-L 2x36 T8, TC-L 1x39 T5 2x39 T5 1x49 T5 2x49 T5 1x54 T5 2x54 T5 1x55 T5, TC-L 2x55 T5, TC-L 1x80 T5, TC-L 3x14 T5 2x80 T5, TC-L iDim EL 1x14-35iDim EL 2x14-35iDim EL 4x14iDim EL 1x14-35iDim EL 2x14-35iDim EL 1x24iDim EL 2x24iDim EL 1x14-35iDim EL 2x14-35iDim EL 1x14-35iDim EL 2x14-35iDim EL 1x36iDim EL 2x36iDim EL 1x39iDim EL 2x39iDim EL 1x49iDim EL 2x49iDim EL 1x54iDim EL 2x54iDim EL 1x55iDim EL 2x55iDim EL 1x80iDim EL3x14iDim EL2x80iDim Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 152 79 42 110 56 101 51 81 42 66 34 73 37 61 31 47 24 44 22 43 22 30 54 16 Based on Ipeak 46 38 42 46 38 57 45 46 38 46 34 45 34 45 31 45 24 44 22 43 22 26 48 12 Typical inrush current Ipeak (A) 1/2 value time Calculated energy Δt (µs) Ipeak2Δt (A2s) 35 38 35 35 38 30 37 35 38 35 38 37 44 37 44 37 49 37 49 37 49 49 34 49 144,0 173,0 141,0 144,0 173,0 123,0 130,0 144,0 173,0 144,0 173,0 130,0 165,0 130,0 165,0 130,0 200,0 130,0 200,0 130,0 200,0 200,0 141,0 323,0 0,13 0,18 0,13 0,13 0,18 0,08 0,13 0,13 0,18 0,13 0,18 0,13 0,23 0,13 0,23 0,13 0,36 0,13 0,36 0,13 0,36 0,36 0,12 0,46 Typical inrush current Ipeak (A) 1/2 value time Calculated energy Δt (µs) Ipeak2Δt (A2s) Home Prev Next EL-iDim-c Lamp(s) iDim-c 1x18W TC-DE/TE 2x18W TC-DE/TE 1x18W TC-L/F 1x24W TC-L/F 1x22W TC-T5c 1x40 W TC-T5c 2x18W TC-L/F 2x24W TC-L/F 1x26W TC-DE/TE 1x32W TC-TE 1x42W TC-TE 2x26W TC-DE/TE 2x26W TC-DE/TE 2x32W TC-TE 2x42W TC-TE 1/2x18iDim-c 1/2x18iDim-c 1/2x18/24iDim-c 1/2x18/24iDim-c 1/2x18/24iDim-c 1/2x18/24iDim-c 1/2x18/24iDim-c 1/2x18/24iDim-c 1/2x26-42iDim-c 1/2x26-42iDim-c 1/2x26-42iDim-c 1/2x26-42iDim-c 2x26-42iDim-c 2x26-42iDim-c 2x26-42iDim-c Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 119 63 107 82 82 57 67 47 82 67 54 43 47 37 28 Based on Ipeak 56 56 56 56 56 56 56 47 56 56 54 43 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 49 49 49 Helvar | Data is subject to change without notice. More information at: www.helvar.com 171,0 171,0 171,0 171,0 171,0 171,0 171,0 171,0 171,0 171,0 171,0 171,0 200,0 200,0 200,0 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,36 0,36 0,36 O07 089 1I 25.03.2013 2/6 103 More information at: www.26 0.43 0.35 3.35 0.26 0.43 0.37 0.35 2.35 2.com 1/2 value time Calculated energy Δt (µs) 49 44 44 49 44 49 44 49 44 44 149 44 149 44 205 44 205 205 49 44 149 49 44 44 149 44 205 149 44 205 205 Ipeak2Δt (A2s) 0.35 0.35 0.37 O07 089 1I 25.helvar.37 2.35 3.35 0.35 2.35 2.37 3.43 0.43 0.37 3.26 0.26 0.Quantity of control gear for miniature circuit breakers (MCB’s) EL-sc Lamp(s) 1 x 14 W T5 2 x 14 W T5 4 x 14 W T5 1 x 21 W T5 2 x 21 W T5 1 x 24 W T5 2 x 24 W T5 1 x 28 W T5 2 x 28 W T5 1 x 35 W T5 2 x 35 W T5 1 x 39 W T5 2 x 39 W T5 1 x 49 W T5 2 x 49 W T5 1 x 54 W T5 2 x 54 W T5 1 x 80 W T5 1 x 18 W T8 2 x 18 W T8 4 x 18 W T8 1 x 24 W TCL 2 x 24 W TCL 1 x 36 W T8/TCL 2 x 36 W T8/TCL 1 x 58 W T8 2 x 58 W T8 1 x 70 W T8 1 x 55 W TCL 2 x 55 W TCL 1 x 80 W TCL EL-sc EL1x14sc EL2x14sc EL4x14sc EL1x21sc EL2x21sc EL1x24sc EL2x24sc EL1x28sc EL2x28sc EL1x35sc EL2x35sc EL1x39sc EL2x39sc EL1x49sc EL2x49sc EL1x54sc EL2x54sc EL1x80sc EL1x18sc EL2x18sc EL4x18sc EL1x24sc EL2x24sc EL1x36sc EL2x36sc EL1x58sc EL2x58sc EL1x70sc EL1x55sc EL2x55sc EL1x80sc Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 152 83 42 107 56 99 52 83 40 66 33 61 31 48 24 43 22 29 136 70 36 99 52 70 36 47 24 40 42 22 29 Based on Ipeak 86 71 42 86 56 86 52 83 40 66 33 61 31 48 24 43 22 27 86 70 34 86 52 70 34 47 24 34 42 22 27 Typical inrush current Ipeak (A) 25 31 31 25 31 25 31 25 31 31 47 31 47 31 47 31 47 47 25 31 47 25 31 31 47 31 47 47 31 47 47 104 Helvar | Data is subject to change without notice.37 0.26 0.43 0.35 0.35 3.35 3.35 0.03.26 0.2013 3/6 Home Prev Next . 04 0.05 2.13 0.13 0.57 0.07 0.04 0.27 0.91 0.3 1.52 2.13 0.03.90 0.13 0.51 0.67 2.2013 4/6 105 .93 2.04 0.30 0.04 0.04 0.helvar.Quantity of control gear for miniature circuit breakers (MCB’s) EL-ngn5 Lamp(s) 1x14 W T5 2x14 W T5 3x14 W T5 4x14 W T5 4x14 W T5 1x21 W T5 2x21 W T5 1x24 W T5 2x24 W T5 3x24 W T5 4x24 W T5 1x28 W T5 2x28 W T5 1x35 W T5 2x35 W T5 1x36 W T5 2x36 W T5 1x39 W T5 2x39 W T5 1x49 W T5 2x49 W T5 1x54 W T5 2x54 W T5 1x55 W T5 2x55 W T5 1x80 W T5 2x80 W T5 EL-ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL3/4x14ngn5 EL3/4x14ngn5 EL4x14ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x24ngn5 EL2x24ngn5 EL3/4x24ngn5 EL3/4x24ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x39/36ngn5 EL2x39/36ngn5 EL1x39ngn5 EL2x39/36ngn5 EL1x49ngn5 EL2x49ngn5 EL1x54ngn5 EL2x54ngn5 EL1x55ngn5 EL2x55ngn5 EL1x80ngn5 EL2x80ngn5 Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 161 83 56 42 41 112 57 101 53 35 27 86 43 68 34 70 37 60 32 47 25 44 22 43 22 30 15 Based on Ipeak 88 50 50 50 50 88 50 88 80 33 33 88 50 88 50 88 50 88 50 57 33 80 26 57 26 45 16 Typical inrush current Ipeak (A) 21 34 34 34 34 21 34 21 22 47 47 21 34 21 34 21 34 21 34 23 40 23 40 23 40 36 49 1/2 value time Calculated energy Δt (µs) 139 152 149 149 152 139 152 136 142 165 165 139 152 139 152 136 152 136 152 183 183 141 230 183 230 156 287 Ipeak2Δt (A2s) 0.59 Typical inrush current Ipeak (A) 29 29 37 1/2 value time Calculated energy Δt (µs) 148 153 215 Ipeak2Δt (A2s) 0.3 0.22 0.27 0.30 1.05 0.48 2.07 0.13 1.com O07 089 1I 25.15 0.40 Home Prev Next EL-ngn Lamp(s) 1 x 18 W T8 2 x 18 W T8 4 x 18 W T8 3 x 18 W T8 4 x 18 W T8 1 x 36 W T8 2 x 36 W T8 1 x 58 W T8 2 x 58 W T8 EL-ngn EL1x18ngn EL2x18ngn EL4x18ngn EL3/4x18ngn EL3/4x18ngn EL1x36ngn EL2x36ngn EL1x58ngn EL2x58ngn Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 136 70 36 50 37 72 37 47 24 Based on Ipeak 74 70 36 47 37 71 37 47 24 Typical inrush current Ipeak (A) 23 22 37 34 34 24 30 23 50 1/2 value time Calculated energy Δt (µs) 131 132 193 149 149 134 152 128 136 Ipeak2Δt (A2s) 0. More information at: www.04 0.00 1.04 0.13 0.13 EL-es Lamp(s) 4x18 W T8 2x36 W T8 2x58 W T8 EL-ngn EL4x18es EL2x36es EL2x58es Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 35 38 24 Based on Ipeak 60 58 29 Helvar | Data is subject to change without notice.13 0.67 0. 30 1.30 1.16 0.67 0.03.16 1.16 1.30 1.30 1.30 2.30 1.67 1.17 O07 089 1I 25.30 2.74 0.16 1.30 1.com Typical inrush current Ipeak (A) 17 34 34 34 34 34 34 34 34 34 17 17 47 47 17 34 34 47 34 47 34 67 17 17 34 34 17 34 34 47 34 49 1/2 value time Calculated energy Δt (µs) 69 149 149 149 149 149 149 149 149 149 69 69 165 165 69 149 149 172 149 165 149 231 69 69 149 149 69 149 149 165 149 180 Ipeak2Δt (A2s) 0.30 1.30 3.30 6.30 1.30 1.2013 5/6 Home Prev Next .30 1.30 1.helvar.30 0.16 1.Quantity of control gear for miniature circuit breakers (MCB’s) EL-s / EL-su Lamp(s) 1 x 14 W T5 2 x 14 W T5 3 x 14 W T5 4 x 14 W T5 1 x 21 W T5 2 x 21 W T5 1 x 28 W T5 2 x 28 W T5 1 x 35 W T5 2 x 35 W T5 1 x 24 W T5 2 x 24 W T5 3 x 24 W T5 4 x 24 W T5 1 x 39 W T5 2 x 39 W T5 1 x 49 W T5 2 x 49 W T5 1 x 54 W T5 2 x 54 W T5 1 x 80 W T5 2 x 80 W T5 1 x 18 W T8 2 x 18 W T8 3 x 18 W T8 4 x 18 W T8 1 x 36 W T8 2 x 36 W T8 1 x 58 W T8 2 x 58 W T8 1 x 70 W T8 2 x 70 W T8 EL-s EL1x14-35s EL2x14-35s EL3/4x14s EL3/4x14s EL1x14-35s EL2x14-35s EL1x14-35s EL2x14-35s EL1x14-35s EL2x14-35s EL1x24s EL2x24s EL1x39/36s EL2x39/36s EL1x49s EL2x49s EL1x54 EL2x54 EL1x80s EL1x18s EL2x18s EL3/4x18s EL3/4x18s EL1x36/40/18s EL2x36/40s EL1x58s EL2x58s EL1x70s EL2x70s EL-su EL1x14-35s-u EL2x14-35s-u EL3/4x14s-u EL3/4x14s-u EL1x14-35s-u EL2x14-35s-u EL1x14-35s-u EL2x14-35s-u EL1x14-35s-u EL2x14-35s-u EL3/4x24s-u EL3/4x24s-u EL1x49s-u EL2x49s-u EL2x80s-u EL3/4x18s-u EL3/4x18s-u EL1x36/40s-u EL2x36/40s-u EL1x58s-u EL2x58s-u - Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 166 83 56 42 112 57 86 43 68 34 103 53 35 27 61 32 49 25 44 22 30 15 143 75 50 37 74 37 48 24 40 20 Based on Ipeak 122 47 47 42 47 47 47 43 47 34 103 53 32 27 61 32 47 25 44 22 30 15 122 75 47 37 74 37 47 24 40 20 106 Helvar | Data is subject to change without notice. More information at: www.67 2.77 1.30 2.67 1.16 2.30 0.16 0. 24 0.23 0.24 0.25 0.10 0.05 0.24 0.22 0.23 0.Quantity of control gear for miniature circuit breakers (MCB’s) EL-TCs Lamp(s) 1 x 9 W TC-SE 1 x 10 W TC-DE 1 x 10 W TC-DD 1 x 11 W TC-SE 1 x 13 W TC-DE/TE 1 x 16 W TC-DD 2 x 9 W TC-SE 2 x 10 W TC-DE 2 x 11 W TC-SE 2 x 13 W TC-DE/TE 1 x 18 W TC-DE/TE 2 x 18 W TC-DE/TE 1 x 21 W TC-DD 1 x 18 W TC-L/F 1 x 24 W TC-L/F 1 x 26 W TC-DE/TE 1 x 32 W TC-TE 1 x 42 W TC-TE 1 x 22 W TC-T5c 1 x 40 W TC-T5c 2 x 18 W TC-L/F 2 x 24 W TC-L/F 2 x 26 W TC-DE/TE 2 x 26 W TC-DE/TE 2 x 32 W TC-TE 2 x 42 W TC-TE 22 + 40 W TC-T5c 40 + 40 W TC-T5c 1x14W PL-R 2x14W PL-R 1x17W PL-R 2x17W PL-R 1x36TC-L 2x36TC-L 1x38TC-DD 2x38TC-DD EL1/2x-TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x9-13TCs 1/2x18TCs 1/2x18TCs 1/2x18TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 1/2x18-42TCs 2x32/42TCs 2x32/42TCs 2x32/42TCs 2x32/42TCs 2x32/42TCs 1/2x14-17TCs 1/2x14-17TCs 1/2x14-17TCs 1/2x14-17TCs 1/2x36/38TCs 1/2x36/38TCs 1/2x36/38TCs 1/2x36/38TCs EL1x-TCs 1x9-13TCs 1x9-13TCs 1x9-13TCs 1x9-13TCs 1x9-13TCs 1x9-13TCs 1x18TCs 1x18TCs 1x18TCs 1x18-42TCs 1x18-42TCs 1x18-42TCs 1x18-42TCs 1x18-42TCs 1x18-42TCs 1x18-42TCs 1x14-17TCs 1x14-17TCs 1x14-17TCs 1x14-17TCs - Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 229 224 215 167 160 160 129 120 90 84 127 67 102 147 96 88 75 55 96 59 68 46 42 45 38 28 38 32 133 76 110 60 63 33 62 32 Based on Ipeak 34 34 34 34 34 34 34 34 34 34 35 35 35 33 33 33 33 33 33 33 33 33 33 33 33 28 33 32 33 33 33 33 33 33 33 32 Typical inrush current Ipeak (A) 41 41 41 41 41 41 41 41 41 41 41 41 41 40 40 40 40 40 40 40 40 40 40 42 42 42 42 42 41 41 41 41 42 42 42 42 1/2 value time Calculated energy Δt (µs) 182 182 182 182 182 182 182 182 182 182 181 181 181 192 192 192 192 192 192 192 192 192 192 184 184 184 184 184 190 190 190 190 184 184 184 184 Ipeak2Δt (A2s) 0.23 0.23 0.23 0.22 0.23 0.23 0.23 0.23 0.helvar.23 0.23 0.23 0.25 0.22 O07 089 1I 25.13 0.23 0.23 0.2013 6/6 107 .23 0.23 0.25 0.23 0.0 222.24 0.0 137.23 0.24 0. More information at: www.com 1/2 value time Calculated energy Δt (µs) 135.24 0.22 0.23 0.23 0.0 Ipeak2Δt (A2s) 0.03.24 0.0 188.24 0.24 Home Prev Next EP-h Lamp(s) 1x20 HI 1x35 HI 1x50 HI 1x70 HI EP-h EP1x20h EP1x35h EP1x50h EP1x70h Quantity of ballasts per miniature circuit breaker 16 A Type C Based on ICont 104 58 46 32 Based on Ipeak 75 52 37 32 Typical inrush current Ipeak (A) 22 32 28 41 Helvar | Data is subject to change without notice.25 0. .com O13 100 1G 12. Ensure mains supply is switched off before attempting any wire removal.Wire release instructions These instructions provide details of how to remove wires from the terminals of Helvar ballasts without damaging the terminals.SE & L26S types Use a flat blade screwdriver Use a 1 mm² solid pin (or similar) or gently twist and pull wire at the same time … with screw terminals Use a flat blade screwdriver EP-h Use a Use a flat blade screwdriver (example shown) to push down gently on the built in push button.2011 1/1 . EL-ngn Next … NK/E. Electronic Ballasts quick release vertical push-in terminals Use a blunt tool (example shown) to push down gently on the built in push button.helvar.04. Magnetic Ballasts … with push in terminals Use a 1 mm² solid pin (or similar) Note:Removal using a solid pin is not advised since permanent damage to the connector may occur. Home IDC & horizontal push-in terminals) Gently twist and pull wire at the same time Prev Note:Wire removal from insulation piercing contact is only possible with force.. More information at: www. 108 Helvar | Data is subject to change without notice. EL-s wiring options Standard connection (shown on product label) All new EL2x.02.s (Except EL2x14-35s & EL2x49s) EL2x14-35s & EL2x49s Home Prev Next Option (6 wires) Option (8 wires) All new EL2x.helvar..2010 1/1 109 . T8 & TC-L) EL2x14-35s & EL2x49s Connection equal to previous ballast-lamp wiring for T5 and TC-L. Helvar | Data is subject to change without notice..com O07 090 1C 18..s All new EL2x. More information at: www. Note: T8 not compatible with previous EL-HF connection.s (Except EL2x14-35s & EL2x49s) (T5. 16. E40 SHP-T NAV-T SON-T SON-T TCF SON-T HSE E 27.D G 24 d LYNX-D Dulux D PL-C - FD-D Biax™ D TC-DE G 24 q LYNX-DE Dulux D/E PL-C - FD-D/E Biax™ D/E TC-T GX 24 d LYNX-T Dulux T PL-T - - Biax™ T TC-TE GX 24 q LYNX-TE Dulux T/E PL-T - - Biax™ T/E.helvar.Markings of lamp types Marking Cap Sylvania Osram Philips Thorn Tungsram GE T26 (T8) G13 F L TL F F T16 (T5) G5 F L TL F F TC-S G23 LYNX-S Dulux S PL-S - FD Biax™ S TC-SE 2G7 LYNX-SE Dulux SE PL-S - FD/E Biax™ SE TC . E40 SHP/I NAV-E SON - - Lucalox I HST-DE R 7 S.-LE Dulux L PL-L 2L FD-L Biax™ L TC-DD GR8.02.com O13 094 1C 18. More information at: www. Fc 2 - NAV-TS - SON-TD - SON-TD E27. Fc 2 HIS-TD HQI-TS MHN-TD HPI-TD MBIL HqMIS MQI HIT-I E40 - HQI-T HPI-BUS - - MBI-T HIE E27.GR10q - - - 2D - Biax™ 2D™ T-R.QE TC-L 2 G 11 LYNX-L. E40 SHP-E NAV-E SON SON-E TCL SON-E HSE-I E 27. E40 HSR-BW HQL-R HPL-R MBFR - MBFR High pressure sodium lamps HST E 27. E 40 SHX NAV-E SON-H - - SON-Classique HIT G 12 HIS-T HQI-T MHN-T (PG12) MBI-T/ BOH - MBI-T HIT E 40 HIS-T HQI-T HPI-TD MQI-T HqMIF MBIF HIT-DE R 7 S.2010 1/1 Home Prev Next .28/30.T9 G 10 q FC FC TL-E - - Circline® T-R. E 40 M (E27) HQI-E HPI MBI HqMIL MBI HIR E40 - HQI-R - - HqMIR - Substitutive high pressure sodium lamps HSE-X Metal halide lamps 110 Helvar | Data is subject to change without notice. E 40 HSL HQL HPL MBF HqLI HqLI HMG E27 - HQL-B HPL-B - - - HMR E27.T5 2GX13 FC FC TL 5 C - - - TC-F 2 G 10 LYNX-F Dulux F - - - - Fluorescent lamps Compact fluorescent lamps High pressure mercury lamps HME E27. for standalone luminaire use Helvar | Data is subject to change without notice.10 V - - - - 124 TK4 1 .com 111 . The sensors provide additional energy savings to Helvar electronic controllable ballasts. Control output Motion Detector Constant Light Features Bright Out IR Receiver Dimming Relay Output Home Page Minisensor3 DALI * - - 116 iDim Sense 316 DALI * - - 113 µDim SL-MW-DA DALI * - 117 µDim SL-MW-AN 1 .helvar.Sensors and controls Helvar offer a range of sensors.10 V - - - - Prev 125 * DALI broadcast.10 V - 118 µDim SL-MW-SW Switching µDim SS-PIR-AN 1 . as well as automatic lighting control. More information at: www.10 V µDim SS-PIR-SW Switching - - Next 119 - 120 - - 121 MIMO3 1 .10 V - - - - 123 MIMO2 1 . for luminaire mounting or standalone use. 1. energy saving lighting control..helvar.60 Hz 40 mA ta: 10°C. The basic functions are pre-programmed and are fully adjustable to meet all requirements.com iDim Sol o Interface Modul e 100 . Multisensor (312) . The modes are designed to fulfil the needs for easy-to-use.240 V 50 .Easy intelligence in luminaires The luminaire based iDim concept provides 6 out-of-box application modes that are easy to select just by rotating the Mode Selector on the iDim Sense.. More information at: www.com . 112 Helvar | Data is subject to change without notice.helvar . (PIR extension) iDim Sense (316) (PIR extension) Home iDim Sense (316) (Master ) RJ Style 4P4C Cable DA DA DALI 1 64 mA 230 V )+( )-( Prev iDim Ballast s Next L N SW 1 com SW 2 com Switch Control iDim Sense tc www.freedom in lighting iDim ..5 9 mm 16 DAL I 1 64 mA + - DAL I 2 32 mA + - DA )+( DA )-( iDim Solo Switch Control via DIGIDIM 444 DIGIDI M Panels 5 6 4 1 3 2 1) Classroom 2) Single office 3) Open plan office 4) Corridor link 5) Corridor hold 6) Meeting room Please refer iDim user guide for detailed description of the iDim modes..5.50°C tc: 75°C DALI 2 32 mA 0. The manual mode selector allows the user to easily select one of the 6 out-of-box application modes.2013 1/1 113 .04. non-condensing -25 °C … 75 °C PIR detection area: (Clip-on PIR Restrictor exluded) 3. connected to the DALI bus of the iDim Solo.3 mm 20 mm 55 mm 25 mm iDim Sense with Fascia 58 mm 28.8m 0. DALI consumption: Ambient temperature: Relative humidity: Storage temperature: Key Features Constant light reception area • PIR.0m 85O 60O 0. The 316 is also able to act as an extension PIR sensor.4 mm Luminaire mounted.5 mm 21.5m 2. remote control receiver (IR) and photocell (CL) in one enclosure. weight 15 g Home Connections Prev iDim Sense (316) (Master) Extension PIR sensor mode only Next RJ Style Cable ( 4P4C ) iDim Solo DA+ DA DALI 2 32 mA DA (+) DA (-) EL-iDim Ballasts DALI 1 64 mA DA (+) DA (-) Introduction Technical Data The iDim Sense is a luminaire based DALI sensor.com 4.iDim iDim Sense (316) iDim Sense without Fascia 7.5m 3. It combines a movement detector (PIR).5m Helvar | Data is subject to change without notice. More information at: www. Constant Light and Infrared control • Easy to select application modes • Clip-on fascia in different colours • Clip-on PIR Restrictor • Mode selector with LED feedback 3.3 mm 12.0m 10 mA 10 …50 °C 90 % maximum.helvar.5m T13 160 1A 17. 65 Hz (absolute) Internally resettable fuse (PTC) DALI 1: 64 mA DALI 2: 32 mA 10…50 °C 90 % max.com 100 .) 85 . the iDim Solo can be used as a DALI power supply unit (PSU).helvar. The unit is housed in a standard ballast-style enclosure (30 mm width x 21 mm height) making it fast and easy to assemble. Additionally. More information at: www.DALI1 DA+ DA.DALI2 Switch-Control Introduction Technical Data The iDim Solo is used as an interface module to connect the iDim Sense (316 Standalone) and iDim ballasts as well as user interfaces.04.iDim iDim Solo (403) Luminaire mounted.240 VAC. Mains Supply: Protection: 2 x DALI outputs: Ambient temperature: Relative humidity: Storage temperature: Key Features • Power capability: 64 mA (DALI 1). weight 40 g Home Connections Prev RJ Style 4P4C Connector L N Next iDim Sense / Minisensor3 DA+ DA. 32 mA (DALI 2) or 96 mA when operating in parallel • 2 x DALI outputs • 2 x Switch control inputs • iDim Sense connection (RJ style.264 VAC.2013 1/1 . 4P4C) • Mains connection 114 Helvar | Data is subject to change without notice.60 Hz (nom. non-condensing -25 °C…+75 °C T13 161 1A 17. 45 . 50 . halogen free. E.4 Scene Recall /Configuration Function key (Fn) Lights off ( ) H. Battery cover K. LED indicator (Flashes when comms transfer is in progress and when buttons pressed) Up modifier Down modifier D.iDim iDim Remote (304) 59 mm Ch2 Ch1 OK Ch1 110 mm Ch2 1 2 3 4 Fn 21 mm Non-flammable polycarbonate. 10 m 36 kHz 0 to 40 °C 90 % max. F.2013 1/1 115 . This hand held unit is fitted with eleven buttons that control basic functions such as raising and lowering the general light level and selecting four pre-set scenes and off. weight 40 g Home Prev H A Ch1 Ch2 OK Ch1 Ch2 1 2 3 4 Fn Next B C D I E F G J K A. non-condensing -10 °C to +70 °C Pressing certain button combinations together allow basic programming functionality. Additional Features • Mountable wall bracket / desk stand included • Connects to PC for advanced lighting setup via USB cable Helvar | Data is subject to change without notice. Transmitter I. These include modifying pre-set levels and running test sequences. USB connection (Mini B) Introduction Technical Data The Infra-red iDim remote control allows the user to control..04. Power Supply: Operating range: Operating frequency: Ambient Temperature: Relative Humidity: Storage Temperature: 2 x AAA (LR03) 1. C. B. More information at: www. G.helvar. OK key 1 .com T13 162 1A 17.5 V Batteries Approx. Mode selector button J. modify and configure standalone lighting applications fitted with a 316 iDim Sense. 0m 116 Helvar | Data is subject to change without notice. More information at: www.com 4.helvar.0m PIR detection area: 3.8m 85O 0. non-condensing Storage temperature: -10 °C … 70 °C IP rating 21 Electric strength 1.5m 5.04.0m 7.Minisensor3 Minisensor3 Luminaire mounted Home Connections Prev Minisensor3 RJ Style 4P4C Connector Next iDim Solo L N 1 2 EL-iDim 3(DA) 4(DA) 1 EL-iDim 2 3(DA) 4(DA) Introduction Technical Data The Helvar Minisensor3 is a two channel luminaire-mounted component containing three integrated sensors: • Presence detector (PIR) • Constant light sensor • Infrared (IR) receiver. configured with 303 IR-remote 1) Automatic PIR 2) PIR with manual switch ON / automatic OFF 3) PIR with constant light function 4) PIR with manual switch ON / automatic OFF. Supply: from iDim Solo Ambient temperature: 0 …50 °C Relative humidity: 90 % maximum.0m 100O 0.5m T13 159 1A 17.2013 1/1 . with the constant light function • Small and compact size Constant light reception area 3.5 kV Key Features • 4 operating modes. 2 A Dimmed Output .helvar.4 x DALI ballasts Light level 200 – 900 Lux Ambient temperature: -10 …35 °C Type Class II Motion detection area Key Features • Time delay function • Constant light functionality • Switching with lux level sensing • Programmable using optional IR handset (p. As microwave radiation penetrates plastic and glass. It has been designed so that it can be used for luminaire mounted or ceiling mounted applications. The unit comes complete with a flush-mount bracket.240 V AC.8m 5m 8m Helvar | Data is subject to change without notice. Home Connections Prev Next Sensor head Power supply unit LOAD max 2A L N DA+ DALI Ballast DA- N L Introduction Technical Data The SL-MW-DA miniature microwave presence detector provides automatic control of lighting loads.04. More information at: www. 50 Hz Max load capacity Relay Output .SL-MW-DA µDim Microwave DALI Sensor 300 3 o 11mm 39 Fixing lugs for bulkhead fitting 1. allowing unobtrusive mounting of the sensor head into ceiling tiles or onto solid surfaces.2013 1/1 117 . this unit has been specifically designed to be mounted inside a luminaire. Supply voltage 220 .5 Detai 18 19 Please see page 122 for power supply unit dimensions. 122) • Compatible with with Helvar DALI ballasts / drivers Motion detection area 2.com 12m T13 158 1A 17. SL-MW-AN µDim Microwave 1-10 V Sensor 300 3 o 11mm 39 Fixing lugs for bulkhead fitting 1.8m 5m 8m 118 Helvar | Data is subject to change without notice.240 V AC. Supply voltage 220 . It has been designed so that it can be used for luminaire mounted or ceiling mounted applications.5 Deta 18 19 Please see page 122 for power supply unit dimensions.2013 1/1 . 50 Hz Max load capacity Relay Output .04.com 12m T13 156 1A 17.122) • Compatible with with Helvar 1-10 V ballasts / drivers Motion detection area 2.4 x 1-10 V ballasts Light level 200 – 900 Lux Ambient temperature: -10 …35 °C Type Class II Motion detection area Key Features • Time delay function • Constant light functionality • Switching with lux level sensing • Programmable using optional IR handset (p. The unit comes complete with a flush-mount bracket. More information at: www. Home Connections Prev Next Sensor head Power supply unit LOAD max 2A L N C0(-) 1-10V Ballast C1(+) N L Introduction Technical Data The SL-MW-AN miniature microwave presence detector provides automatic control of lighting loads. allowing unobtrusive mounting of the sensor head into ceiling tiles or onto solid surfaces.2 A Dimmed Output . this unit has been specifically designed to be mounted inside a luminaire.helvar. As microwave radiation penetrates plastic and glass. Home Connections Prev Next Sensor head Power supply unit LOAD max 2A L N Introduction Technical Data The SL-MW-SW miniature microwave presence detector provides automatic control of lighting loads.04.240 V AC.900 Lux Ambient temperature: -10 …35 °C Type Class II Max load capacity Light level Motion detection area Motion detection area 2.helvar. Supply voltage Key Features • Time delay function • Switching with lux level sensing • Programmable using optional IR handset (p.SL-MW-SW µDim Microwave Switching Sensor 3 300 o 11mm 39 Fixing lugs for bulkhead fitting 1. 122) 220 . this unit has been specifically designed to be mounted inside a luminaire.8m 5m 8m Helvar | Data is subject to change without notice. As microwave radiation penetrates plastic and glass. It has been designed so that it can be used for luminaire mounted or ceiling mounted applications.2013 1/1 119 . The unit comes complete with a flush-mount bracket. allowing unobtrusive mounting of the sensor head into ceiling tiles or onto solid surfaces. More information at: www.com 12m T13 157 1A 17. 50 Hz 2 A (4 ballasts) 200 .5 Detai 18 19 Please see page 122 for power supply unit dimensions. 50 Hz Max load capacity 2 A – INC. ELV.8m 5m 120 Helvar | Data is subject to change without notice. fluorescent and compact fluorescent lighting. Home Connections Prev Next Sensor head Power supply unit LOAD max 2A L N C0(-) 1-10V Ballast C1(+) N L Introduction The SL-PIR-AN presence detector provides automatic control of lighting loads.SL-PIR-AN µDim PIR 1-10 V Sensor 3 300 22 20 28 3 1. More information at: www.5 19 22 Please see page 122 for power supply unit dimensions. 122) • Compatible with with Helvar 1-10 V ballasts / drivers Technical Data Supply voltage 220 . The miniature size makes it ideally suited for mounting in luminaires to provide local control of individual fittings.com T13 155 1A 17.240 V AC. Key Features • Dimming with lux level sensing • Constant light functionality • Programmable using optional IR handset (p.2013 1/1 .04. and CFL 4 x 1-10 V ballasts Light level 200 – 900 Lux Ambient temperature: -10 …35 °C Type Class II PIR detection area 2. It will switch incandescent.helvar. FL. Supply voltage 220 . and CFL Light level 200 – 900 Lux Ambient temperature: -10 …35 °C Type Class II Key Features • Time delay function • Switching with lux level sensing • Programmable using optional IR handset (p.122) PIR detection area 2. FL.helvar.240 V AC.SL-PIR-SW µDim PIR Switching Sensor 3 300 22 20 28 3 1.8m 5m Helvar | Data is subject to change without notice. 50 Hz Max load capacity 2 A. ELV. When an area is no longer occupied the load will switch off after an adjustable time out period. The unit detects movement using a PIR sensor and turns the load on.2013 1/1 121 .com T13 154 1A 17. Home Connections Prev Next Sensor head Power supply unit LOAD max 2A L N Introduction Technical Data The SL-PIR-SW presence detector provides automatic control of lighting loads with optional manual control.5 19 22 Please see page 122 for power supply unit dimensions.04. INC. The miniature size makes it ideally suited for mounting in luminaires to provide local control of individual fittings. More information at: www. µDim SA-IR-PROG µDim IR Programmer The SA-IR-PROG is a compact infrared handset used for the programming of µDim sensors. Please refer to µDim sensor datasheets and user guides for more information. Home Power supply unit dimensions (all µDim models) 133 Prev Next 22.5 145 20.5 122 Helvar | Data is subject to change without notice. More information at: www.helvar.com MIMO3 MIMO3 energy saving sensor 19 13 30 36.5 23 17 21 17 21 MIMO3 panel mounting 18 18 MIMO3-T5 (16 mm) MIMO3-T8 (26 mm) Home Connections Setup Prev Next Red Black MIMO3 connection to EL-sc / ballast Adjust the rotary top shell to set the desired light level Introduction Technical Data MIMO3 is a very small light sensor that enables simple, automatic constant light control. It can be used with any Helvar 1-10 V controllable ballast or driver. MIMO3 can be mounted directly to the fluorescent lamps, or panel mounted in the luminaire casing. Control voltage 1-10 VDC (EN60929) Ambient temperature: 5 …55 °C Relative humidity: 80 % maximum, non-condensing Storage temperature: -40 °C … 70 °C IP rating 20 Control Range 200 to 600 lux +/- 50 lux Viewing angle 45° average, 42-52° depending on aperture Key features • Easy installation into the luminaire casing or fluorescent lamp • Simple setting of the constant light level • Start up at full level • Controls up to 15 Helvar electronic ballasts • Supply voltage derived from the ballast • Smooth dimming operation, 1.5 minute settling time • Compatible with Helvar EL-sc ballasts 42-52O max. 5m Note: Pre-assembled with T5 clip. T8 clip and panel flange also included in package Helvar | Data is subject to change without notice. More information at: www.helvar.com T13 153 1A 01.04.2013 1/1 123 MIMO2 MIMO2 constant light sensor Ø18.0mm +0.2 –0.0 0.5 – 1.2mm Luminaire mounted (with flush mounting bracket) Connections Home Setup Prev Next Note: Take care when adjusting the rotary disc, as it is able to rotate freely through 360O. For example, when adjusting for a darker light level, turning the disc too far anticlockwise will result in a brighter setting Introduction Technical Data MIMO2 is a cylindrical light sensor that can be fitted into a luminaire casing. MIMO2 offers simple, automatic daylight control of fluorescent luminaires achieving maximum energy savings in offices, schools, factories, airports and shopping centres. Control voltage Ambient temperature: Relative humidity: Storage temperature: Key Features Measuring Range 200 ... 600 Lux at sensor set 2 m above surface IP rating 20 • Easy installation into the luminaire • Simple setting of the constant light level • Start up at full level • Controls up to 15 Helvar electronic ballasts • Supply voltage derived from the ballast • Response delay (hysterisis) approximately 2 minutes • Compatible with all Helvar 1-10 V ballasts / drivers 1-10 VDC (EN60929) 0 …55 °C 80 % maximum, non-condensing -40 °C … 70 °C 45O 2m 0.8m 124 Helvar | Data is subject to change without notice. More information at: www.helvar.com 1.5-2.5m T13 151 1A 01.04.2013 1/1 Prev Next Introduction Technical Data Helvar’s modular ballast controller offers EN 60929 (1-10 V) ballast control together with a mains power switch.04. 70 °C IP Rating: Isolation: 30 4 kV 140 200 Satin White Plastic Single Gang 140 201 Lacquered Polished Brass 140 202 Satin Stainless Steel 140 203 Stainless Steel & Grey Insert Helvar | Data is subject to change without notice.TK4 TK4 modular ballast controller 140203 140202 140201 140200 Home Connections For loads over 20 ballasts use a contactor.2013 1/1 125 .com T13 152 1A 01. . . More information at: www. Switch Rating: 10 A (resistive) VAC Switch Load Capacity: Up to 20 Helvar EL-sc ballasts The TK4 is available in the following standard finishes: • Satin white plastic • Lacquered polished brass • Satin stainless steel • Stainless Steel & Grey Insert Product Order Codes: Ambient temperature: Relative Humidity: Storage Temp: 0 …35 °C 90 % max.helvar. non-condensing -10 °C . The TK4 is styled to compliment the Helvar DIGIDIM panel range and offers the same flexibility that the modular concept provides which allows any mix of TK4 and DIGIDIM control panels. com O13 095 1R 25.03. More information at: www. 1) Approved to EN 61347-2-8 2) For a combination of two 8 W T5-lamps Note: All combinations can be used as well with Eco-lamps.Helvar ballasts for fluorescent lamps T5 4 136 G5 L 8 D L 8 DL 1) 79 L 8 D L 8 DL 1) 79 - L 8 D L 11 D 79 - L 13 DL 79 (FD-H) ø16mm 6 212 G5 8 288 G5 13 517 G5 14 549 24 28 849 549 1149 EL1/2x9-13TCs 2) 46 G5 EL1x14-35ngn5 EL2x14-35ngn5 EL3/4x14ngn5 EL4x14ngng5 EL1x14-35s EL2x14-35s EL3/4x14s EL1x14-35s-u EL2x14-35s-u EL3/4x14s-u EL1/2x9-13TCs 46 G5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x14-35s EL2x14-35s EL1x14-35s-u EL2x14-35s-u EL1/2x9-13TCs 46 G5 EL1x24ngn5 EL2x24ngn5 EL3/4x24ngn5 EL1x24s EL2x24s EL3/4x24s-u 46 G5 EL1x14-35ngn5 EL2x14-35ngn5 EL1x14-35s EL2x14-35s EL1x14-35s-u EL2x14-35s-u EL1/2x9-13TCs 46 T5 21 Standard electronic ballast 48 EL1x14sc EL2x14sc EL4x14sc 50 48 50 EL1x24sc 48 EL2x24sc 28 48 EL1x35sc EL2x35sc 50 38 EL1x14-35iDim EL2x14-35iDim 28 38 EL1x39iDim EL2x39iDim 28 38 EL1x49iDim EL2x49iDim 28 38 EL1x54iDim EL2x54iDim 28 38 EL1x80iDim EL2x80iDim 28 46 46 G5 EL1x49ngn5 EL2x49ngn5 EL1x49s EL2x49s EL1x49s-u EL2x49s-u 46 46 G5 EL1x80ngn5 EL2x80ngn5 EL1x80s EL2x80s-u 1) Home EL1x14-35iDim EL2x14-35iDim EL1x39/36ngn5 EL2x39/36ngn5 EL1x39/36s EL2x39/36s 1449 28 38 50 G5 80 EL1x14-35iDim EL2x14-35iDim EL1x28sc EL2x28sc 48 849 G5 38 Magnetic Ballast (230 V. 126 Helvar | Data is subject to change without notice. 50 Hz) Next 50 39 1149 28 28 G5 54 EL1x14-35iDim EL2x14-35iDim EL3x14iDim EL4x14iDim EL1x24iDim EL2x24iDim 1449 EL1x54ngn5 EL2x54ngn5 EL1x54s EL2x54s 38 38 35 1449 EL1x21sc EL2x21sc Digital DALI electronic ballast Prev EL1x14-35ngn5 EL2x14-35ngn5 EL1x14-35s EL2x14-35s EL1x14-35s-u EL2x14-35s-u 49 Controllable electronic ballast Page Cap Page Length (mm) Page W Page Lamp type EL1x39sc 48 EL2x39sc 48 EL1x49sc EL2x49sc 50 EL1x54sc 48 EL2x54sc 48 50 EL1x80sc Types printed BOLD are ENEC approved combinations. Please check CE compatibility and EEI classification from ballast datasheets.2013 1/6 .helvar. Other combinations mentioned are tested and recommended by Helvar. 03. Other combinations mentioned are tested and recommended by Helvar. Please check CE compatibility and EEI classification from ballast datasheets. 50 Hz 3) Not T8 eco lamp Helvar | Data is subject to change without notice.com O13 095 1R 25.100mm L 18 TL2 L 18 TL3 L 18 TL4 L 75 A-S 2) L 70 TL4 1)2) G13 38 40 Magnetic Ballast (230 V. More information at: www.2013 2/6 127 .T8 (FD-E) ø26mm 18 590 G13 T8 36 1200 G13 Standard electronic ballast EL1x18s EL2x18s EL3/4x18s EL3/4x18s-u 53 EL1x18ngn EL2x18ngn EL3/4x18ngn EL4x18ngn 52 EL1x36/40/18s EL2x36/40s EL1x36/40s-u EL2x36/40s-u EL1x36ngn EL2x36ngn EL1x18-42TCs 58 1500 EL1x58s EL2x58s EL1x58s-u G13 EL2x58s-u EL1x58ngn EL2x58ngn EL1x36sc EL2x36sc 40 52 EL1x36iDim EL2x36iDim 72 L 36 A-T L 36 A-K L 40 A-L L 40 A-C 30 L 36 A-TK L 36 TL2 L 36 TL3 L 36 TL4 53 EL1x58sc EL2x58sc 40 - 52 EL1x70s EL2x70s 72 Home L 58 TL2 L 58 TL3 L 58 TL4 L 58 TL4 .220mm L 58 A-S L 65 A-P L 58 A-K L 58 A-T L 58 A-TK 73 Prev Next 73 - - - L 15 A L 15 A-P L 15 TL3 72 G13 - - - L 16 D L 16 DL 72 G13 - - L 15 A-P 72 - L 30 A L 30 A-P L 30 TL2 72 15 450 G13 16 720 23 970 30 900 G13 EL2x32/42TCs 32 3) 1200 G13 EL2x49s 1047 53 - L 18 A-L L 18 A-K L 18 A-T L 2x18 A-L L 2x18 A-L L 20 A-P L 26 TS5 . 50 Hz) - 1500 970 EL1x18sc EL2x18sc EL4x18sc Digital DALI electronic ballast 40 70 36 Controllable electronic ballast Page Length Cap (mm) Page W Page Lamp type Page Helvar ballasts for fluorescent lamps EL1x49s EL1x36/40/18s EL2x36/40s EL1x36/40s-u EL2x36/40s-u EL1x36/40/18s G13 EL2x36/40s EL1x70sc 57 - - - - - - - - - EL1x36sc EL2x36sc - - L 36 TL2 L 36 TL4 L 36 A-K L 36 A-T L40 A-L L40 A-C L 36 TL3 L 36 A-TK 72 Types printed BOLD are ENEC approved combinations.helvar. 1) Approved to EN 61347-2-8 2) 240 V. Other combinations mentioned are tested and recommended by Helvar. GR10q EL1x18-42TCs 38 GR8. Please check CE compatibility and EEI classification from ballast datasheets. More information at: www. 50 Hz) Page Cap Standard electronic ballast G10q L 30 TL2 L 30 A 78 G10q L 32 TB2 78 EL1/2x18-42TCs EL1x18-42TCs EL1/2x18-42TCs EL1x18-42TCs EL2x32/42TCs1) EL1x55ngn5 EL1x55s Controllable electronic ballast 57 EL1x39sc EL2x39sc . GR10q EL1x9-13TCs EL1/2x18/24iDim-c 31 41 EL1/2x18/24iDim-c - 31 57 Mod-U-line (FU-E) 40 Digital DALI electronic ballast Page W Page Lamp type Page Helvar ballasts for fluorescent lamps - L 36 TL2 L 36 TL3 L 36 TL4 L 36 A-K L 36 A-T L40 A-L L40 A-C L 36 A-TK L 36 TL2 L 36 TL3 L 36 TL4 L40 A-L L40 A-C L 36 A-K L 36 A-T L 36 A-TK - Home - Next 57 57 L16 D 2) L16 DL 78 21 GR8. GR10q EL1/2x36/38TCs 57 57 L18 TL2 L18 TL3 L20 A-P L18 A-L L18 A-T L18 A-K L18 TL4 L26S L36 TL2 L36 TL3 L36 TL4 L40 A-C L36 A-K L36 A-T L36 A-TK 78 78 Types printed BOLD are ENEC approved combinations.helvar.T5 circular 22 2GX13 40 2GX13 55 2GX13 22 32 Circline (FD-E) 40 Magnetic Ballast (230 V.EL1x55sc G10q TC-DD 2D-lamp GR8. 1) For a combination of one 22W and one 40 W circular lamp 2) GR8 not ENEC approved 128 Helvar | Data is subject to change without notice. GR10q EL1/2x18-42TCs EL1/2x18-42TCs 28 GR8. for electronic ballast or magnetic with external starter 10 16 G13 - EL1/2x9-13TCs GR10q EL1x9-13TCs EL1/2x9-13TCs GR8.com Prev O13 095 1R 25.2013 3/6 . for magnetic ballast only GR10q.03. Please check CE compatibility and EEI classification from ballast datasheets. 50 Hz) Page Cap Page W Page Lamp type Page Helvar ballasts for fluorescent lamps L26 TS5-100mm L18 TL2 L18 TLB2 L18 TL3 32 L18 TL4 L20 A-P L18 A-K L18 A-T L18 A-L 77 L26 TS5-100mm L18 TL2 31 L18 TL3 L18 TL4 L20 A-P 32 L18 A-K L18 A-T L18 A-L 77 Home EL1x14-35iDim 1) EL2x14-35iDim 1) 60 31 Prev EL1x14-35iDim 1) EL2x14-35iDim 1) 31 41 EL1x36iDim EL2x36iDim L36 TL2 L36 TL3 L36 TL4 31 L40 A-C L36 A-T L36 A-K L36 A-TK 41 EL1x39iDim EL2x39iDim 31 60 55 60 EL1x36sc 56 EL2x36sc 60 60 EL1x39sc EL2x39sc Next 77 56 55 60 EL1x55sc EL2x55sc 41 EL1x55iDim EL1x80sc 41 EL2x55iDim 55 60 60 EL1x80iDim EL2x80iDim 31 31 Types printed BOLD are ENEC approved combinations. More information at: www.com O13 095 1R 25.03. 1) Dimming range 3-100 % Helvar | Data is subject to change without notice. Other combinations mentioned are tested and recommended by Helvar.helvar.EL1/2x18/24iDim-c EL1x24sc EL2x24sc 41 EL1x24iDim EL2x24iDim EL1/2x18/24iDim-c 60 60 Magnetic Ballast (230 V.2013 4/6 129 .Standard electronic ballast Controllable electronic ballast Digital DALI electronic ballast TC-L (FSD-E) 18 24 26 28 36 40 55 80 2G11 2G11 2GX11 2GX11 2G11 2G11 2G11 2G11 EL1/2x18-42TCs EL1x18-42TCs 56 EL1x36/40/18s EL1x36/40s-u 60 60 EL1/2x18-42TCs EL1x18-42TCs 56 EL1x24ngn5 EL2x24ngn5 EL3/4x24xngn5 EL1x24s EL2x24s EL3/4x24s-u EL1x14-35s EL2x14-35s EL1x14-35s-u EL2x14-35s-u EL1x14-35s EL2x14-35s EL1x14-35s-u EL2x14-35s-u EL1x39/36ngn5 EL2x39/36ngn5 EL1x39/36s EL2x39/36s EL1/2x36/38TCs EL1/2x18-42TCs EL1x18-42TCs EL2x36ngn EL1x36/40/18s EL1x36/40s-u EL2x36/40s EL2x36/40s-u EL1/2x18-42TCs EL1x18-42TCs EL1x55ngn5 EL2x55ngn5 EL1x55s EL2x55s EL1x80ngn5 EL2x80ngn5 EL1x80s EL2x80s-u 55 . More information at: www.2013 5/6 Next . 1) Approved to EN61347-2-8 130 Helvar | Data is subject to change without notice.L36 A-T L36 A-TK L36 A-K L40 A-C L11 D L11 DL 1) L11 D L11 DL 1) L11 D L11 DL 1) L11 D L11 DL 1) 5 G23 7 G23 9 G23 11 G23 9 2G7 EL1/2x9-13TCs EL1x9-13TCs 57 11 2G7 EL1/2x9-13TCs EL1x9-13TCs 57 10 G24d-1 13 G24d-1 18 G24d-2 26 G24d-3 Page W Page ILCOS Page Lamp type Page Helvar ballasts for fluorescent lamps - - Home - Prev 79 79 79 79 FSD-E TC-D FSQ-I L13 D L13 DL 1) L13 D L13 DL 1) L18 D L18 TLD-100mm L18 DL L18 TL2 L18 TL3 L26 S-100mm L26 TS5-105mm L26 TS5-100mm L20 A-P L18 A-L L18 A-K L18 A-T L18 TL4 78 78 78 78 Types printed BOLD are ENEC approved combinations.03.Cap TC-F 18 FSS-E 24 36 TC-S FSD-I TC-SE 2G10 2G10 2G10 Standard electronic ballast EL1/2x18-42TCs EL1x18-42TCs EL1x36/40/18s EL1x36/40s-u 56 61 EL1x24s EL2x24s EL3/4x24s-u EL1/2x18-42TCs EL1x18-42TCs EL1x24ngn5 EL2x24ngn5 EL3/4x24xngn5 61 EL1x39/36s EL2x39/36s 61 EL1/2x36/38TCs EL1/2x18-42TCs EL1x39/36ngn5 EL2x39/36ngn5 Controllable electronic ballast 56 EL1x24sc EL2x24sc - EL1x36sc 56 EL2x36sc - Digital DALI electronic ballast Magnetic Ballast (230 V. 50 Hz) L18 TL2 L18 TL3 L18 TL4 EL1/2x18/24iDim-c 32 L20 A-P L18 A-L L18 A-K L18 A-T L18 TL2 L18 TL3 L18 TL4 L26 TS5-100mm 41 EL1/2x18/24iDim-c 32 L26 TS5-105mm L20 A-P L18 A-L L18 A-T L18 A-K EL1x36iDim 41 EL2x36iDim L36 TL2 L36 TL3 L36 TL4 . Other combinations mentioned are tested and recommended by Helvar.helvar. Please check CE compatibility and EEI classification from ballast datasheets.com O13 095 1R 25. 03. 50 Hz) Page Helvar ballasts for fluorescent lamps L18 D L18 TLD-100mm - FSQ-E TC-T EL1/2x18-42TCs EL2x32/42TCs 18 GX24d-2 Home FSM-I L18 TL2 L18 TL3 L26 TS5-105mm L26 TS5-100mm 26 GX24d-3 TC-TE FSM-E 13 GX24q-1 EL1/2x9-13TCs EL1x9-13TCs 59 18 GX24q-2 EL1/2x18TCs EL1x18TCs 59 EL1/2x18iDim-c 32 26 GX24q-3 EL1/2x18-42TCs EL2x32/42TCs 59 EL1/2x26-42iDim-c EL2x26-42iDim-c 32 59 EL1/2x26-42iDim-c EL2x26-42iDim-c 32 59 EL1/2x26-42iDim-c EL2x26-42iDim-c 32 EL1/2x26-42iDim-c 2) 32 EL1/2x18-42TCs 32 GX24q-3 EL1x18-42TCs EL2x32/42TCs EL1/2x18-42TCs 42 GX24q-4 EL1x18-42TCs EL2x32/42TCs PL-R 57 GX24q-4 EL1/2x18-42TCs EL1x18-42TCs 59 14 GR14q-1 EL1/2x14/17TCs EL1x14/17TCs 59 17 GR14q-1 EL1/2x14/17TCs EL1x14/17TCs 59 - Prev Next Types printed BOLD are ENEC approved combinations. More information at: www.2013 6/6 131 . 1) Approved to EN61347-2-8 2) UIN > 220 V . Other combinations mentioned are tested and recommended by Helvar. Please check CE compatibility and EEI classification from ballast datasheets. Ta > 18 OC Helvar | Data is subject to change without notice.com O13 095 1R 25.helvar.TC-DE Cap Standard electronic ballast 10 G24q-1 EL1/2x9-13TCs EL1x9-13TCs 58 13 G24q-1 EL1/2x9-13TCs EL1x9-13TCs 58 18 G24q-2 EL1/2x18TCs EL1x18TCs 58 EL1/2x18iDim-c 32 26 G24q-3 EL1x18-42TCs 58 EL1/2x26-42iDim-c EL2x26-42iDim-c 32 Controllable electronic ballast Digital DALI electronic ballast Page W Page ILCOS Page Lamp type Magnetic Ballast (230 V. Home Prev Next .