HD2014 LED Operation Manual of the Control SystemFile Version Page Operation Manual of the HD2014 LED Control System English 1-38 HD2014 LED Operation Manual of the Control System 1 / 38 HD2014 LED Operation Manual of the Control System C ontents Contents............................................................................................................................... 2 Appendix 1 Types of Control Card......................................................................................4 Appendix 1.1 Types of control card.......................................................................................4 Appendix 1.2 Features of the fourth generation card............................................................5 Chapter 1 Overview.............................................................................................................. 6 1.1 Features.......................................................................................................................... 6 1.2 Operating environment................................................................................................... 6 Chapter 2 Installation and Uninstallation...........................................................................6 2.2 Uninstallation.................................................................................................................. 7 Chapter 3 Tools Help............................................................................................................ 7 3.2 Title bar........................................................................................................................... 8 3.3 Menu bar......................................................................................................................... 8 3.3.1 File menu.................................................................................................................. 8 3.3.2 Settings menu.......................................................................................................... 9 3.3.3 Operation menu...................................................................................................... 11 3.3.4 Tool............................................................................................................................ 13 3.3.5 View........................................................................................................................... 13 3.3.6 Language menu..................................................................................................... 14 3.3.7 Help menu................................................................................................................. 14 3.4 Toolbar.......................................................................................................................... 14 3.5 Analog display............................................................................................................... 15 3.6 Display attribute column................................................................................................15 3.7 The use of remote control............................................................................................. 16 Chapter 4 Creation Process of Screen Program..............................................................17 2 / 38 HD2014 LED Operation Manual of the Control System 4.1 Create new screen (the first-level content)...................................................................17 4.2 Create new program (the second level content, a screen can create 200 programs.). .18 4.3 Create new area (the third-level content, each program can be set to 8 areas.)..........19 4.4 Finished programs........................................................................................................ 20 Chapter 5 Display Different Content...................................................................................20 5.1 Single-line text display.................................................................................................. 20 5.2 Multiline text display...................................................................................................... 21 5.3 Hypertext display.......................................................................................................... 22 5.4 Time display (calendar time).........................................................................................23 5.5 Clock display (analog clock)......................................................................................... 23 5.6 Clockwise / counter-clockwise count display................................................................24 5.7 Temperature display (Sensor is required to buy.)..........................................................25 Chapter 6 Communication Settings....................................................................................26 6.1 Production of Serial line................................................................................................26 6.2 Communication settings (serial port).............................................................................26 6.3 Production of network line............................................................................................. 27 6.4 Communication settings (network interface).................................................................27 6.4.1 Single network communication in LAN...................................................................27 6.4.2 Multiple network card communication in LAN.........................................................28 6.5 Communication settings（WIFI）.................................................................................29 Appendix 2 Common Settings during Use.........................................................................30 Appendix 2.1 How to remotely upgrade the control card?..................................................30 Appendix 2.2 How to restore the controller card to factory settings?..................................31 Appendix 2.3 How to test screen with the control card?.....................................................31 Appendix 2.4 Time switch for screen..................................................................................31 Appendix 2.5 Play screen at a specified time.....................................................................32 Appendix 2.6 How to set subtitles to be stationary?...........................................................32 Appendix 2.7 Export to U disk............................................................................................. 32 Appendix 2.8 Common solutions to uneven luminance on the screen................................33 Appendix 2.9 Operation of buttons on the control board.....................................................35 3 / 38 WIFI Card. Control range： 512*1024(1024 P10 modules).U disk card. 2: HD-M3. Serial Card. Serial Card. 17: HD-W42. Control range：32*1024(64 P10 modules). Network Card. Network Card.Serial Card.Q41. Control range：128*1280 (320 P10 modules). 4: HD-Q40. 6: HD. 5: HD-A41. Serial Card. Network Card.U disk card.U disk card.U disk card. 7: HD-U40.U disk card.HD2014 LED Operation Manual of the Control System Appendix 1 Types of Control Card Appendix 1. WIFI Card.U disk card. Control range：32*768(48 P10 modules).1 Types of control card 1: HD-S3. 4 / 38 . Control range：256*640 (320 P10 modules). Control range：128*2048(512 P10 modules).U disk card.U disk card. Control range：64*768 (96 P10 modules). Control range：256*1024(512 P10 modules).U disk card. 13: HD-E41. 8: HD-U41. 3: HD-A40. Control range：128*640 (160 P10 modules).Serial Card. 14: HD-E42. Control range：512*1024(1024 P10 modules).U disk card.U disk card. Control range：64*2048(256 P10 modules). Serial Card. Network Card. Control range：64*512(64 P10 modules). Control range：32*1024(64 P10 modules). Serial Card. Control range：64*1280(160 P10 modules).U disk card. 11: HD-X42. 10: HD-X41. Control range：256*1024(512 P10 modules). 9: HD-X40. Control range：64*768/32*1536(96 P10 modules).U disk card.U disk card. 15: HD-E43. Control range：256*640 (320 P10 modules). 12: HD-E40. 16: HD-W40.U disk card. the control length will be halved if using double-color. hypertext (tables. the remote control can choose the programs to be played flexibly. multi-line text. such as single-line text. easy to learn and use. etc. time.1 Features "HD2014" Control System is a larger adjustment made by Huidu Company to strip screen market in 2014.For the convenience of customers’ choices. powerful. prices are more reasonable. and the length of three-color is 1/3 of that of the single color. count (clockwise/counterclockwise count). So it is enough to meet the trend of higher and longer strip screen.). JGP/BMP/GIF. moreover. clock. The overall software interface is simple. Chapter 1 Overview 1. temperature. besides. 5 / 38 . 1. some of the repetitive controllers are integrated. It supports these display modes.HD2014 LED Operation Manual of the Control System Single-color is for all of the control ranges above.2 Features of the fourth generation card The fourth generation card can expand the control range.2 Operating environment Operating system: Chinese/English (multi-lingual) Windows98/2000/ME/XP/Win7/Vista. so it can meet the requirements of different applications. Hardware configuration: no special requirements. and the control ranges are updated more flexibly besides. it is more cost-effective. animated characters.. Appendix 1. etc. the control areas can be added from 5 to 8. see below: Click the prompt (Next) on the screen to complete the installation. Then it will enter the software setup wizard.exe shortcut on the desktop to enter the operating interface. 2.exe (or HD2014_Setup.1 Installation "HD2014" Software installation is very simple. then click “HD2014” to run it.RAR) in your disk. doubleclick the file to install it. so 6 / 38 . you can also click the HD2014.2 Uninstallation "HD2014" software package provides a complete uninstallation function. please operate as follows: find the HD2014_Setup.HD2014 LED Operation Manual of the Control System Chapter 2 Installation and Uninstallation 2. After the "HD2014" software is successfully installed. the "HD2014" program group will be shown in the [Start] / [Programs]. 7 / 38 Toolbar . Chapter 3 Tools Help 3. to the left/right. Users can select “Uninstall HD2014” in the [Start] / [Programs] / HD2014 program groups to completely remove HD2014 and all of its components.HD2014 LED Operation Manual of the Control System that users can easily delete all documents.1 The main interface of software Open the main interface of the "HD2014" software.2 Title bar Analog Tools (zoom in/out. double-click it to open the communication settings. It is used to display the name of the software. previous/next) Time Switch Communication settings port. see below: Title Bar Menu Bar Analog Screen Preview Window Program Area Screen Parameters 3. program groups and shortcuts in the "HD2014". 1 File menu The file menu consists of five options: New Screen. Communication Settings.srcd.. Users can save the preset screen parameters into the UserScreenConfig file or custom file. as follows: New Screen (Ctrl + N): It is used to create a new screen. Exit (E): Close the HD2014 software. and add the function of importing and exporting parameters. see below: 8 / 38 . Operation. as follows: Screen Settings: They are used to set the basic parameters of the control card and display screen. Open.. Save As.2 Settings menu This menu includes Screen Settings. Save (Ctrl + S): It is used to save the current file and save it in the Project file under the installation path by default. Save As . Save. 3. the HD2014 manageable screen is not limited. 3. Exit. View. System Settings.3 Menu bar It includes these options: File. Tools.HD2014 LED Operation Manual of the Control System 3.3. local IP Settings. Settings.: By clicking this option. and the format is *. Language and Help.3. the current file can be saved in another specified position. Readback.. Open (Ctrl + O): It is used to open the recently used documents. firmware cannot be updated. as below: Click the “Search” to connect to the available serial port.HD2014 LED Operation Manual of the Control System Import the preset parameters to parameter settings Import and save the preset parameters in the file Communication Settings: They are used to set the communication between control card and computer. Send broadcast messages and update firmware 9 / 38 Various IPs of the control card can be set in this mode. but they are controlled respectively. . Time Setting.3 Operation menu It contains Send Project.3. Firmware Update，See below: Send Project: It is used to send the current screen file. so convenient and direct. IP Management tools. Export to U disk. Multiple Send: It’s for network card's exclusive use. For Persian. Readback: If you need to alter the parameters to those of the control card. Clear display data. Multiple Send. Screen Test. Luminance Setting.HD2014 LED Operation Manual of the Control System Detect successfully after the wireless network emitted by WIFI card is connected and transmits wirelessly. Time Switch. 3. these parameters can be directly read back. you should select “Right>Left”. Local IP Settings: Users can alter the system's local IP. and used for sending 10 / 38 . System Settings: They are used to set the system parameters (not recommended to change). as below: IP Management tools: They are for network card’s exclusive use. users can send the content of multiple screens to control card through multiple send. Please refer to the operation of IP management tools: After finishing the association.HD2014 LED Operation Manual of the Control System multiple screen files. see below: Clear display data: Clear the information inside the control card (restore to factory settings). Export to U disk: Export the data to U disk. All kinds of U disks and hard disks are supported. then associate with the corresponding screen. and used for distributing the IP addresses of different network cards and associating with the related screens: Time Setting: You can set the time of control card according to your 11 / 38 . set the parameters of each screen to custom IP. X Firstly. and update it. 5 View It contains analog screen’s Zoom out. Screen Test: Software tests screen. which are used to open the practical tools on the system. to the system time by default. 3. but firstly you need to get the current firmware version，please use the firmware to update if there is any new version. calculator. and don’t display it when unwanted. Output and Apply the program’s appearance.4 Tool It includes notepad.3. Zoom in. The newly added drawing tool can save the data by printscreen more conveniently. Luminance Setting: You can set the luminance of screen through serial port or network port. Center. 3. Firmware Update: It is used for upgrading the control card. Time Switch: Set the time of time switch.3. Luminance values can also be updated by U disk.HD2014 LED Operation Manual of the Control System requirement or. 12 / 38 . drawing tools. you can view the process and know whether the sending is success. while in the multi-line text area both texts and tables can be edited.4 Toolbar Toolbar includes Programs. as follows: Program: It is used to create a new program (This program is the subdirectory of the screen. Japanese. Send. color parameters of the program in the control card. It is used for switching among different languages.HD2014 LED Operation Manual of the Control System Output Window: When opening the output window. Iranian. when you are indicated that the sending is overtime. English. U disk and Preview tools.3. Temperature. 3. 3.6 Language menu This menu includes ten languages: Simplified Chinese. Adjust Time. Traditional Chinese. Text.. etc. Hypertext.7 Help menu It is used for viewing the version number of HD2014 software. you can view the type of the current connected control card and the screen size. Turkish. Mongolian. Spanish. during sending. 3. 13 / 38 . Polish. Time. Animated characters. please check whether the line is normal. Text: It is used to create a single-line area or a multi-line text area. Russian.3.). It cannot operate normally until you update the firmware that is required to be updated. only pure texts can be edited in the single-line text area. such as waves. save the currently displayed file and time into U disk (U disk is updated. elastic characters. Animation characters: Create an animated character area. count area. Export: It’s for U disk card’s exclusive use. zooming. Adjust Time: Adjust the system time (adjust the time of control card to be synchronized with that of computer). swing from one side to the other. Time area is used to display the system time (calendar mode).HD2014 LED Operation Manual of the Control System Hypertext: It is used to create an image-text area (Pictures and hypertexts can be inserted. Preview: Preview the current program (Note: You can preview only when one program is selected.).). 14 / 38 . character rotation. where you can build hollow characters. flying to left/right. swing.). Temperature: Create a temperature area and use it to display the current environment temperature (Temperature sensor module is needed.). stroke font. scrolling. and set various special effects. clock area is also used to display the system time (multiple round clock forms). Time: Create a new time area or clock area. output character by character. Send: It is used to send the current screen file. vertical/horizontal rotation. count area is used to display the clockwise/ counter-clockwise count. flash. HD2014 LED Operation Manual of the Control System 3. including zoom in/out the analog window. luminance. 15 / 38 . time switch and clear display data.5 Analog display Analog screen Preview window Analog tools (zoom in/out. move around the current area. 3. time. test screen. turn on/off the screen and so on. you can set the screen parameters. previous/next) Note: the rational use of analog tools can help you edit screen file more conveniently. to the left/right. . etc. turn page of the screen content.6 Display attribute column In this column.. communication. communication settings. Functional navigation: It includes screen parameter settings. luminance settings. time settings. turning on/off the screen. please operate the remote control as follows: 16 / 38 . time switch. 3. clear display data. etc.HD2014 LED Operation Manual of the Control System Current screen parameters Functional navigation Current screen parameters: They are changed according to screen parameter settings.. screen test.7 The use of remote control An infrared probe needs to be welded. New screen (The password is 168 or 188.HD2014 LED Operation Manual of the Control System Chapter 4 Creation Process of Screen Program 4. the pop-up settings page is as below: 17 / 38 .).1 Create new screen (the first-level content) Methods: Click File . Incorrect setting of scan mode will cause messy codes. Before setting. screen height. click “OK” to complete the establishment of a screen. namely. but no change is recommended under normal conditions. color.HD2014 LED Operation Manual of the Control System Module Selection: Select the type of your control card. After finishing the settings. screen width. Basic Settings: They are mainly used to set data polarity. Incorrect setting of the 138 decoder will cause non-display or wrong display: Incorrect setting of color may cause the value of screen height or screen width return to the previous one. OE polarity. and click “Next”. you need to know the correct attributes of each parameter. while some lines are dark. or the error will cause wrong display. some lines are bright. scan mode and whether to use the 138 decoder. Incorrect setting of OE polarity will lead to uneven luminance. Troubleshooting: Incorrect setting of data polarity will lead to black characters on a red background. see below: 18 / 38 . Advanced Settings: They are used to fine-tune parameters. which include play mode. 19 / 38 .2 Create new program (the second level content.) Methods: Click the “program” on the shortcut bar (Premise: select a screen first). Remove screen.HD2014 LED Operation Manual of the Control System The new screen 4.sub-period settings. a screen can create 200 programs. including the border . program or area At most 200 new programs can be created here. Play at a fixed time Play by week Set the program’s border Note: Each of the 200 programs can set different attributes. as below: New program is as below. border settings (over 200 kinds) and play time (specified time period). time. we’ve created a screen file. Choose the texts to change the font. hypertext.HD2014 LED Operation Manual of the Control System 4. and color. By previewing. click text. size. if we need to create more programs. 20 / 38 .. Save the programs into disk after completing them (They are stored in the Project file under the installation path by default. select the program.).) Methods: First. you can view the dynamic image of each program at real-time and set the display mode. then just repeat these three steps.3 Create new area (the third-level content. etc. or in the specified directory through the file menu. Over 40 display modes and 30 clearing modes are available.4 Finished programs Texts can be edited here. After the three steps above. if satisfied. If you need a software to control multiple screens. see below: Set the coordinates. then create different types of areas. 4. clock. temperature. The fastest speed is 1ms. each program can be set to 8 areas. count. you will have to create more screen files. just repeat the second and third steps above (several programs can be played on a same screen). don’t overlap. you can send it to screen through the “Send” button. but this area does not support the Enter key. the content will be output. we can simply use the single-line text areas. the content displayed on the screen will be kept moving to left.). and edit the character spacing as well as line spacing. then select “single-line text”.1 Single-line text display For pure text display. hollow modes are character available) s Note: For pure text. size exit modes speed is the and color. if you don’t select “End to end”. Click “Text”. length and width can be set freely.) Choose the Input the texts and select display and The fastest Stroke them to adjust the font. we suggest editing it in the single-line text area (This is the simplest setting. Steps: Please refer to 4. (over 40 1ms. a single-line text area will appear (The coordinates. HD2014’s software editor is so powerful that you can alter single text and adjust it to center.1 and 4. If the display mode is “Continuous move to left”. 21 / 38 . it will display continuously if there is a blank key.HD2014 LED Operation Manual of the Control System Chapter 5 Display Different Content 5. and the option “End to end” is selected .2 to create screen program. As the green arrow in the figure above shows. you can add pictures. create tables and open the *. you can use the Enter key to switch to a newline. Set the hollow characters or stroke Stroke is unavailable when it is the single color. all of single-line texts.hf file and add pictures. hf file by clicking the edit box.2 Multiline text display In the multiline text area. 22 / 38 . multiline texts and animated characters are supported: Ctrl + A: Select All Ctrl + Z: Cancel the current operation Ctrl + C: Copy Ctrl + V: Paste 5. tables are also supported here.HD2014 LED Operation Manual of the Control System The following shortcuts are added in the text edit box. open the *. HF and RTF files can be inserted. see below: Hyperte xt Area Add or delete picture s 23 / 38 Choose the display and clearing modes . After clicking the “Hypertext”. length and width can be set freely. a hypertext area (The coordinates.HD2014 LED Operation Manual of the Control System Click “Table” to create a table Insert: All of TXT documents. 5. then you can add the pictures to be displayed to the bottom file list. how to set? Steps are as follows: Steps: Please refer to 4. LOGO or picture (only JPG.) will appear.1 and 4. PNG and GIF formats) to be displayed on the screen. *. BMP.3 Hypertext display If you want LOGO or picture (only JPG. BMP.program. PNG and GIF formats).2 to create screen. After clicking the clock.4 Time display (calendar time) Time display of screen is similar to text and hypertext display. the steps are as follows: Steps: Please refer to 4.) will appear. just click the clock area. length and width can be freely set. just click the time area. steps are as follows: Steps: Please refer to 4. as below: 24 / 38 .) will appear. . length and width can be freely set.1 and 4. so easy! See below: Preview calendar time Set the coordinat es of time area Singleline/multiline/do uble-line display Choose the format of time display 5. just set the position. the time area (The coordinates.2 to create screen-program. It’s very simple to set.HD2014 LED Operation Manual of the Control System 5. a clock area (The coordinates.2 to create screen-program. After clicking “Time”.1 and 4. Just set the position.5 Clock display (analog clock) The clock display is similar to text and hypertext display. HD2014 LED Operation Manual of the Control System Preview clock Adjust the width and color Set the coordinates of time area Chang e the clock style Add background 5.) will appear. a count area (The coordinates. as below: Preview countdown 25 / 38 . Steps: Please refer to 4. length and width can be freely set. After clicking “Count”.6 Clockwise / counter-clockwise count display The screen displays clockwise / counter-clockwise count.1 and 4.2 to create screen-program. a temperature area (The coordinates.1 and 4.8 Animated character display 26 / 38 Preview animated characters Set the hollow character or stroke Thirteen special effects for setting animated character Edit the animated characters here. .1-5. you can know that our software can set multifunctional as well as multi-regional content. so that it can be enough to meet the applications in various scenes.) The screen displays the current environment temperature. After clicking the “Temperature”. see below: Preview temperature Input the background Through the 5.) will appear.HD2014 LED Operation Manual of the Control System Countdown units Count by clockwise/counterclockwise Input the background 5.6 above. length and width can be freely set.2 to create screen-program. 5. Steps: Please refer to the content of 4.7 Temperature display (Sensor is required to buy. see below for the finished line: 6.2 Communication settings (serial port) Methods: Settings . see below: 27 / 38 .).HD2014 LED Operation Manual of the Control System Chapter 6 Communication Settings 6.1 Production of Serial line Our system uses the direct RS232 communication line.Communication Settings (Please confirm the drive installed correctly when using a USB instead of the serial port. 6. and HUB common port and HUB cascading port. the search will automatically succeed. the other TIA/EIA-568A standard. It is used between PC network card and HUB common port. HUB common port and HUB common port. When the communication line is over 15 meters. such as PC network card and PC network card. please change the baud rate to 19200. the characters “Finish search” will appear. 28 / 38 . It is generally used for the same device. if it breaks down.).HD2014 LED Operation Manual of the Control System Click “Search” to search COM port.) and direct line (Control card connects with router. Direct line: The production of two crystal ends is the same. If the communication is free of trouble. Please use the direct line if the control card connects with a switch. one takes TIA/EIA-568B as standard.).3 Production of network line Network line consists of two kinds: overlapping line (Control card connects with computer. if the line keeps normal for a certain time. Overlapping line: The production of two crystal ends is different. Direct line is used so widely that it can applies to all common purposes. the characters “Sending is overtime” will be shown on the output window (check whether the communication line is normal. replug the serial line and search again if normal. for example. both of them take the accordant standard. both use the TIA/EIA-568B standard or TIA/EIA-568A standard. 6. please use the Simplify Mode when only one control card is connected to LAN. control card in LAN Close the unwanted settings after selecting it.4.2 Multiple network card communication in LAN Methods: Settings .Communication settings.HD2014 LED Operation Manual of the Control System Use direct line when the control card connects with a router or switch.4. 6. .4 Communication settings (network interface) 6. when there are multiple 29 / 38 Associate screen with the corresponding IP Set the MAC address for each network card Close the unwanted settings after selecting it.Communication settings.1 Single network communication in LAN Methods: Settings . Use overlapping line when the control card connects with PC network card. see below: Use the simple mode when there is only one Use the simplify mode control card when there is only one in the LAN. HD2014 LED Operation Manual of the Control System network cards to communicate. See below: The setting is effective Please select an IP after being reset. you need to reset the IP of each control card in LAN. then detect wireless network through communication settings. see below: 6. you can communicate with control card. to be reset 30 / 38 . IP Management tools Select an IP before resetting Click “Setting” to be effective after resetting After completing this setting is. if the detecting is successful. please use the Customize Mode，as below: Use the custom IP mode when there are several control cards in LAN. the methods are as follows: Click the Operation menu-IP Management tools. and set the screen parameter to W40/W42.5 Communication settings（WIFI） Methods: Connect to wireless network emitted by WIFI card. HD2014 LED Operation Manual of the Control System 31 / 38 . ). or dealing with major bugs. while normal use does not need to be updated. 32 / 38 .) >Operation Interface. Bin file. select the corresponding bin file. U disk cannot be updated in this way.1 How to remotely upgrade the control card? Remote upgrade of control card is mainly used for updating the product’s features. Click Operation> Update Firmware (The code is 168.HD2014 LED Operation Manual of the Control System Appendix 2 Common Settings during Use Appendix 2. now the operation is completed (Firmware upgrade only can be carried out via RS232 or network port. the specific methods are as follows: Download the corresponding control card firmware (Each product has a corresponding.). see below: View the version of control card Update the control card Click “Update Firmware” on the interface. Note: Keep the power on and do not pull out the serial line during the upgrade. Hardware Test: Adjust the parameters firstly.HD2014 LED Operation Manual of the Control System Appendix 2. Software Test: Software operation> Screen Test> Interface for testing. press the TEST button of the control card (power-on) and hold it for six seconds.3 How to test screen with the control card? There are two ways to test screen: hardware test and software test. Hardware Recovery: Firstly power off > manually press the TEST button (do not let go) > power on (do not let go) > hold for six seconds > let go to finish rebooting. then click eight times for eight different test modes. let go after entering test status.).2 How to restore the controller card to factory settings? There are two ways to restore the control card to factory settings: hardware recovery and software recovery. Appendix 2. as below: Eight test modes 33 / 38 . Software Recovery: Software operation > Clear display data (This step is required to be done in the normal communication state. 1 for screen’s time switch settings. see below: Display stationary when there is only one page.6 How to set subtitles to be stationary? Setting the subtitles to be stationary must be done in the Text window. Appendix 2. Appendix 2. 34 / 38 .4 Time switch for screen Please refer to 4.HD2014 LED Operation Manual of the Control System Appendix 2.5 Play screen at a specified time Please refer to 4.2 for playing screen in a specified period and at a fixed time. you need to adjust the time before exporting in order to ensure the accurate time. if the program contains a time area. plug the U disk.HD2014 LED Operation Manual of the Control System Appendix 2.7 Export to U disk Export Content: After the program is completed. See below: 35 / 38 . then just select the "Export to U disk". you can use the system time. Luminance Settings: Set the luminance according to your own requirement. Appendix 2. or set it by yourself.8 Common solutions to uneven luminance on the screen 1.HD2014 LED Operation Manual of the Control System Adjust the time for U disk: Select the “Adjust time” before exporting. see below: 36 / 38 . Change the frequency to 100% or other values under the advanced settings of screen parameter settings. the current luminance will be displayed when you re-export the content. 8.HD2014 LED Operation Manual of the Control System 2. that is to say.6. 3. 4.7. as the bottom red box in the picture above shows. drag the progress bar to the right. Set the value of speed and luminance to 5. Switch the value of OE polarity. 37 / 38 . Modify the value of latch polarity. if you press it again. see below: 38 / 38 .9 Operation of buttons on the control board Button S1 / test: 1. Press this button and hold it for about 5 seconds after the control card is power on，all the contents in the control card will be cleared. see below： 2. the red. Test screen. Button S2 / RGB: 1. now it can be switched normally. See below： E43/G3 cards cannot switch to the previous program normally unless set the button 1 is set to "Program Switching" under the advanced settings. green. all the lights will turn red，it has entered screen test at this moment. Switch to previous program: AQ0 card needs to set the button 2 to “Switch to previous program" under the advanced settings. and send the content to the control card.HD2014 LED Operation Manual of the Control System Appendix 2. Press this button for about 3 seconds when the screen is bright. blue and white lights will be bright at the same time. please turn the control card off. press and hold this button to turn the power on. while E43/ G3 cards must set the button 1 to “Program Switching”， see above. If the S2 button can switch programs normally. AQ0 card can use this function only when the button 2 is set to "Switch to previous program". three lights of the control card will be bright and one is dark. 39 / 38 .HD2014 LED Operation Manual of the Control System 2. you must update the latest firmware. now the firmware has been cleared. If you want to use the control card again.