Guide for Enterprise Search in Enterprise Asset Management (EAM)

EAM Enterprise Search Guide CUSTOMEREnterprise Asset Management Document Version: 1.0 – 2016-06-14 Guide for Enterprise Search in Enterprise Asset Management (EAM) SAP Enterprise Search on HANA Document History Version Date Change 1.0 2016-06-14 First officially released version via SCN CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 2 © 2016 SAP SE or an SAP affiliate company. All rights reserved. Document History Table of Contents 1 Introduction ................................................................................................................................... 5 2 Overview of Enterprise Search Result ........................................................................................ 6 2.1 Example 1: SAP Enterprise Search on HANA ...................................................................................... 6 2.2 Example 2: TREX Search ....................................................................................................................... 7 3 Getting Started with SAP Enterprise Search .......................................................................... 10 3.1 System Landscape Variants ............................................................................................................... 10 3.1.1 SAP HANA-Based Variant .................................................................................................. 10 3.1.2 TREX/BWA-Based Variant .................................................................................................. 11 4 Search Customizing in General ................................................................................................. 13 4.1 Check Search Connection................................................................................................................... 13 4.2 Activating Interactive Navigation ....................................................................................................... 14 4.3 Search Log Customizing ..................................................................................................................... 14 5 Enterprise Search in EAM ........................................................................................................... 16 5.1 EAM Search Models Depending on Connection Type ...................................................................... 16 5.1.1 ERP (EHP6, EHP7) and TREX Connection ........................................................................ 16 5.1.2 ERP (EHP7 SP11, EHP8 SP02 or newer) and TREX Connection ..................................... 17 5.1.3 ERP on HANA or S/4 HANA with HANA DB Connection ................................................. 18 5.2 Input Help for EAM Applications ........................................................................................................ 18 5.2.1 New Input Help UI for EAM Web Dynpro Apps ................................................................. 19 5.2.2 Personalization of the Input Help ....................................................................................... 21 5.2.3 Customizing View "Activate Enterprise Search for the Input Help" ............................... 22 5.3 Categories in EAM................................................................................................................................24 5.4 Managing Cross-Model Attributes ..................................................................................................... 27 5.5 Searches in EAM based on Enterprise Search Models ....................................................................28 5.5.1 Structure List for Technical Objects ..................................................................................28 5.5.2 Input Help in SAPGUI ..........................................................................................................29 6 Configuration and Administration Tools..................................................................................32 6.1 Using the Connector Administration Cockpit ................................................................................... 32 6.1.1 Creating and Indexing a Connector ................................................................................... 33 6.1.2 Connector Details ................................................................................................................ 35 6.1.3 Real-Time Indexing.............................................................................................................. 35 6.1.4 Link Navigation Depending on UI Technology ..................................................................38 6.2 Using the Search and Analytics Modeler ...........................................................................................39 6.2.1 Creating or Extending Search and Analysis Models ........................................................39 6.2.2 Transport of Model Corrections ........................................................................................44 6.3 Using Task Lists to Create and Index Connectors ............................................................................44 7 Additional Documentation ........................................................................................................ 46 7.1 NetWeaver 7.3 and Older ....................................................................................................................46 Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Table of Contents © 2016 SAP SE or an SAP affiliate company. All rights reserved. 3 7.2 Official Road Map................................................................................................................................. 46 7.3 SAP Notes ............................................................................................................................................ 46 7.4 SCN Blogs ............................................................................................................................................ 47 7.5 Guides and Wiki Links ......................................................................................................................... 47 7.6 Components for Incidents BC-EIM-ESH, PM-ESH ........................................................................... 47 7.7 Transaction Codes and Reports for ES ............................................................................................. 47 Abbreviations EAM Enterprise Asset Management PM Plant Maintenance UI User Interface ES Enterprise Search SCN SAP Community Network (scn.sap.com) BWA SAP Business Warehouse Accelerator EHP Enhancement Package SP Support Package PFCG Profile Generator (Transaction PFCG) UIBB User Interface Building Block (part of Web Dynpro Screen) AS Application Server TREX Search and Classification Engine SWC Software Component DDIC Data Dictionary CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 4 © 2016 SAP SE or an SAP affiliate company. All rights reserved. Table of Contents 1 Introduction SAP provides you with a powerful, fast and complete search tool to be used during the daily work in Plant Maintenance (PM). The Enterprise Search (ES) reduces the time spent searching as you no longer have to navigate to different transactions, applications and tab pages to find the object you wish to edit. This guide deals with the Enterprise Search in general and its use in Enterprise Asset Management (EAM). It does not explain all the features of the Enterprise Search that are available as these are explained in the SAP Library. Nevertheless, links to the most important ES documentation are provided here. SAP Innovation Discovery, which is accessible with a valid S-User, provides you with a rough overview of the EAM functionality described in this guide. As Line of Business choose Asset Management and as Product choose Enterprise Management. You can further drill down to the Software Product Version. The search model in EAM objects was completely reworked and an own result UI was delivered with ERP release EHP7 SP11/ EHP8 SP02. The current SAP NetWeaver release for screen shots and links to other documentation of version 1.0 of this guide is 7.4. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Introduction © 2016 SAP SE or an SAP affiliate company. All rights reserved. 5 You can add more filter options by choosing the pushbutton Show All Filters. When you click on the search button.1 Example 1: SAP Enterprise Search on HANA In this example. In addition. The screen offers a search functionality indicated by a magnifying glass in the upper right-hand corner (1). The result list can be displayed as a table and the results can be sorted with the icons in the upper right-hand corner above the list. The system provides the most important information in up to nine fields of the technical object master record for all the pieces of equipment listed in the Result List. If you want to increase the number of results displayed on one screen. Overview of Enterprise Search Result . you enter the search string Strobel and receive a search result containing 336 pieces of equipment. Next. In our example you choose Equipments (5). All rights reserved. If you search for pieces of equipment. Location and Work Center are available.2 Overview of Enterprise Search Result 2. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 6 © 2016 SAP SE or an SAP affiliate company. the system searches all the data. To narrow down the search results. filters such as Type of Technical Object. If the search string isn’t included in one of the nine fields. If you do not choose any restriction. Planner Group. We assume that you are using a S4/HANA System and you are logged on via a Fiori Launchpad on the frontend system. you first select a search category (3) from the dropdown list (4). the system adds an extra line with the field name and value that matches the search string. the search string is highlighted. an entry field (2) for search terms appears. On the left side of the screen you can drill down and filter the results. you can hide the additional technical object information by clicking on the arrow in the lower right-hand corner of each result entry. which lists all the valid search connectors. you are searching for an equipment manufactured by Strobel. In this example the search string is eamt. You can enter a search term in the Search. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Overview of Enterprise Search Result © 2016 SAP SE or an SAP affiliate company.2. 7 .2 Example 2: TREX Search As a maintenance planner you might use the Order and Notification Information Center of PFCG-role SAP_COCKPIT_EAMS_GENERIC_FUNC2 of Enterprise Asset Management in Web Dynpro. The system searches in all the categories provided (here in Maintenance Orders and Maintenance Notifications) irrespectively of the field where this value is stored. All rights reserved. Beneath the data type (e. All rights reserved. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 8 © 2016 SAP SE or an SAP affiliate company. Notification Type). such as the Notification Type or the Maintenance Work Center. in the screen area on the left-hand side. M3. You have the option of setting additional filters. additional specific filter criteria are available to narrow down the number of results even further. the number of objects that match the search term. the following key features are available for each result entry:  In the upper left-hand corner of the result entry. You can now choose Maintenance Notifications and narrow down the results to 733 matches.923 orders or notifications contain the search string eamt. M1) and.The system then provides a result list and shows the number of objects matching the search string in the upper right-hand corner. Overview of Enterprise Search Result . M2. In our example. 11. the system lists the field values (e. In the screen area on the left-hand side you can determine in which type of data the search should be performed. This allows you to easily distinguish between data types. in brackets.g.g. After you have chosen the type of data (in this example order or notification). In the Result List. the system displays an icon that represents the data type. g. Notification Items…) or to navigation targets where you can proceed with your work (Add to Favorites. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Overview of Enterprise Search Result © 2016 SAP SE or an SAP affiliate company. All rights reserved. Details.  There are links at the end of each result entry.  You can display up to nine fields of the selected document. The first line of a result entry always shows the document number as a clickable link. These links enable you to navigate to further information (e. 9 . is highlighted in bold letters. The first value. which corresponds to the search term. This enables you to easily navigate to the object that is then displayed in a separate window. You can call this search solution irrespectively of the EAM role by using the corresponding SAPGUI transaction ESH_SEARCH. The picture shows a search result list on the SAP Web UI for Plant Maintenance. Display Notification in Asset Viewer…). there is the SAP HANA-based variant. On the one hand. two variants of the SAP Enterprise Search solution exist. the TREX/BWA-based variant.1 System Landscape Variants As shown in the preceding chapter. All rights reserved.3 Getting Started with SAP Enterprise Search 3. On the other hand. 3.1. which requires an additional search technology such as TREX (Search and Classification Engine) or BWA (SAP Business Warehouse Accelerator). which provides direct search access to business data stored in SAP HANA tables.1 SAP HANA-Based Variant The picture below illustrates the process flows for the SAP HANA-based variant at runtime (AS ABAP = Application Server ABAP): CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 10 © 2016 SAP SE or an SAP affiliate company. Getting Started with SAP Enterprise Search . where they are added to the search index.sap.4 as the release. based on the standard user interface) in the SAP system sends a search request to SAP Enterprise Search. Under Application Help. This forwards the query to Search and Classification (TREX) or SAP Business Warehouse Accelerator. Indexing time: At scheduled times SAP Enterprise Search checks for changes to the SAP system data that can be indexed. choose Function-Oriented View → Search and Operational Analytics → Embedded Search. The changes to the data are extracted and passed to Search and Classification (TREX) or SAP Business Warehouse Accelerator.2 TREX/BWA-Based Variant The picture below illustrates the process flows for TREX/BWA-based variant at the indexing time and runtime.Runtime: A search application (for example. 11 . which translates the request into SQL-SELECT statements and directs them to SAP HANA. The search result calculated by SAP HANA is transferred to SAP Enterprise Search. For getting an overview about Embedded Search in general.5 Support Package Stack 01 the SAP Enterprise Search on HANA (short form: Enterprise Search) was called Embedded Search. Note: Before SAP NetWeaver 7. All rights reserved. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Getting Started with SAP Enterprise Search © 2016 SAP SE or an SAP affiliate company. Choose SAP NetWeaver 7. Runtime: A search application in the SAP system sends a search query to SAP Enterprise Search. which uses search indexes to form a search result and passes this result to SAP Enterprise Search. It sends the search result back to the search application. 3.com/nw_platform.1. see SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help. It sends the search result back to the search application. 4 as the release. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 12 © 2016 SAP SE or an SAP affiliate company.sap. Choose SAP NetWeaver 7. Getting Started with SAP Enterprise Search . Under Application Help.For more information about the TREX variant. see SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help.0 and 7. choose Function-Oriented View → Search and Operational Analytics → Other Search Technologies → Search and Classification TREX.com/nw_platform. All rights reserved. configuration and administration can be found here. Versions 7.1 of TREX with information on architecture. The Customizing steps are described in the document at the front of each single Customizing step. Here you can make all the required Customizing settings for the search.  If Use SAP HANA Secondary DB Connection (2) is selected. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Search Customizing in General © 2016 SAP SE or an SAP affiliate company. check Customizing to establish which kind of models you can use for searches. 4. then an RFC connection is established to the TREX server. All rights reserved.4 Search Customizing in General The IMG node Search and Operational Analytics can be easily reached by typing ESH_IMG in the transaction field of the SAPGUI. 13 .1 Check Search Connection First of all.  If Use TREX (1) is selected. Open the SAP Reference IMG (transaction SPRO) and choose SAP NetWeaver → Search und Operational Analytics → Common Settings for Operational Analytics and Enterprise Search → Configure Indexing → Set TREX/BWA Destination or SAP HANA DB Connection. the system is built on a SAP HANA database. you can open the Customizing view ESH_CU_FED in transaction SM30. All rights reserved.com/nw_platform. For more information about traces and logging of Enterprise Search. checkbox.4.3 Search Log Customizing You can define settings for the log that is written when queries are performed in Customizing for SAP NetWeaver under Search and Operational Analytics → Enterprise Search →Search Configuration → Configure Query Logging (transaction ESH_QL_CUST). Under Application Help. The logs can be examined in the Enterprise Search Query Log (transaction ESH_QUERY_LOG). Choose SAP NetWeaver 7.sap. see SAP Library under Technology Platform → SAP NetWeaver → 7. For more details. see SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help.4 as the release. You can do this in Customizing for SAP NetWeaver under Search and Operational Analytics → Enterprise Search → Search Configuration →Set Parameters for Federated Search. refer to the IMG documentation of the Customizing node. select the Interactive Nav. choose Function-Oriented View → Search and Operational Analytics → Managing Search and Operational Analytics → Technical Operations Manual → Monitoring → Trace and Log Files. To enable interactive navigation in all result lists (not only for EAM objects). Search Customizing in General . read the program documentation. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 14 © 2016 SAP SE or an SAP affiliate company.2 Activating Interactive Navigation You have to activate the option of filtering the search results with interactive navigation. For details. Alternatively. 4. 4. Make sure that you adhere to the Data Protection Act and the security standards within your company and keep in mind that a too detailed tracing of queries can have an impact on the system performance. choose Function-Oriented View → Search and Operational Analytics → Embedded Search. Under Application Help.For more information about Setting Up Embedded Search. 4 as the release. Under Application Help. Choose SAP NetWeaver 7. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Search Customizing in General © 2016 SAP SE or an SAP affiliate company. choose Function-Oriented View → Search and Operational Analytics → Security Guide for Search and Operational Analytics → Security of Logs and Traces. 15 .com/nw_platform. All rights reserved. see SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help.For more information about security.sap. 3). new models were created based on HANA technology (see 5. In a next step. The new EAM input help then offered reworked models (see 5. EAM-specific search models were first delivered with the first EAM Web Dynpro Applications (see 5. The segments of a search model are structured by nodes. 5. EHP7) and TREX Connection You use the EAMS virtual models (based on SAP-APPL application models) in search software component EA-APPL if the following prerequisites are fulfilled:  SAP enhancement package 6 or 7 (SP lower than 11) for SAP ERP 6.2) and for S/4HANA and ERP on HANA.1. Three different groups of search models exist for Enterprise Search on EAM Objects. All rights reserved. you can create new models or copy and change existing ones. SAP delivers search object connector models for business objects such as maintenance orders or functional locations. You can use existing nodes or create new nodes by importing a data source and assign node names and attributes. you arrange the nodes in a hierarchical structure by defining relations between the nodes. either as a composition within the search object connector model or as an association to other models in the same software component.1. To use the search models.1 EAM Search Models Depending on Connection Type A search model is a combination of attribute views and search rules for a business entity. you have to create search object connectors (instances of these models) which index the data for searching and provide the search access to specific search object types at a specific destination. Enterprise Search in EAM .5 Enterprise Search in EAM 5.1. If these models do not meet your requirements.1 ERP (EHP6.1).1.0  TREX connection  Business function LOG_EAM_SIMPLICITY (switch EAM_SFWS_EAMS_EA) is activated Model Name Model Description EAMS_BUS0010 Functional Location EAMS_BUS0019 Task List for General Maintenance EAMS_BUS0019_EQ Task List for Equipment EAMS_BUS0019_FL Task List for Functional Location EAMS_BUS1020 Maintenance Plan EAMS_BUS2007 Maintenance Order EAMS_BUS2038 Maintenance Notification EAMS_BUS2092 Measurement Document EAMS_CONFIRMATION_PM Completion Confirmation EAMS_DOCUM_INFO_REC Document Info Record CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 16 © 2016 SAP SE or an SAP affiliate company. 1. Model Name Model Description BUS0010 Functional Location BUS0019 Task List for General Maintenance BUS0019_EQ Task List for Equipment BUS0019_FL Task List for Functional Location BUS1020 Maintenance Plan BUS2007 Maintenance Order BUS2038 Maintenance Notification BUS2092 Measurement Document CONFIRMATION_PM Completion Confirmation EQUI Equipment MAINTENANCEITEM Maintenance Item MEASURING_POINT Measuring Point / Counter OBJECT_LINK Object Link Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company.0 For EHP 7 (SP11).  TREX connection Note: if these prerequisites are fulfilled. You use the search models in search software component SAP_APPL under PM if the following prerequisites are fulfilled:  SAP enhancement package 7 (SP 11) or SAP enhancement package 8 (SP 02) for SAP ERP 6.2 ERP (EHP7 SP11. EAMS_EQUI Equipment EAMS_MAINTITEM Maintenance Item EAMS_MATERIAL Material EAMS_MEASURINGPOINT Measuring Point / Counter EAMS_OBJECTLINK Object Link EAMS_PURCHORD Purchase Order EAMS_PURCHREQ Purchase Requisition 5.1 are obsolete and only the models in the search software component SAP_APPL need to be scheduled. with respect to that. 17 . the improvements are delivered with SAP Notes 2257725 and 2257729. All rights reserved. the EAMS models listed in section 5. EHP8 SP02 or newer) and TREX Connection With SAP enhancement package 7 (SP11) the new input help for EAM Web Dynpro applications was introduced and. the search models for EAM were completely reworked.1. For EHP8 (SP02). the improvements are delivered with SAP Notes 2257725 and 2293084. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 18 © 2016 SAP SE or an SAP affiliate company. They are switched with switch BSESH_HANA_SEARCH_ECC: Model Name Model Description CONFIRMATION_PM_H Completion Confirmation EQUIPMENT_H Equipment FUNCT_LOCATION_H Functional Location MAINTENANCE_ORDER_H Maintenance Order MAINTENANCE_PLAN_H Maintenance Plan MAINTENANC_PL_IT_H Maintenance Plan Item MAINT_NOTIFIC_H Maintenance Notification MAINT_TASK_LIST_H Task List MEASUREMENT_DOC_H Measurement Document MEASURING_POINT_H Measuring Point / Counter OBJECT_LINK_H Object Link 5. you choose the app for displaying maintenance notifications (2) from the group EAM-Notification (1). Enterprise Search in EAM .5. If you have a S4/HANA system and want to access the EAM applications as tiles on the Fiori Launchpad. Each tile represents an EAM app. In this example.1. The picture below shows the Fiori Launchpad for the maintenance planner with several groups of tiles. maintenance orders and notifications or task lists. All rights reserved.2 Input Help for EAM Applications You intend to use the new input help for EAM objects such as technical objects.3 ERP on HANA or S/4 HANA with HANA DB Connection The search models for the HANA database can be found in software component SAPAPPLH under PM. you first have to assign the corresponding business roles for the maintenance planner (SAP_BR_MAINTENANCE_PLANNER) or for the maintenance technician (SAP_BR_MAINTENANCE_TECHNICIAN). you can enter a text string in the free text search (1) or use specific search criteria for a number of fields (2). If you do not choose any search criteria.2). On the left-hand side.2. 19 . the system provides a complete list of all notifications. All rights reserved. you type in the notification number to view the respective document or you use the input help to search for a notification. 5. In the header area of the Search: Notification popup. To copy the notification number to the app. you can filter the results with Interactive Navigation (see 4.In the Display Maintenance Notification app. choose the arrow icon (5) to the left of the appropriate result number. You can save a search as Favorite (3) or choose an existing search instead of entering the criteria anew every time.1 New Input Help UI for EAM Web Dynpro Apps The picture below shows the search results of the input help for the Display Maintenance Notification app if you have activated the Enterprise Search. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company. you can use the links (4) to open the document in Asset Viewer or to add it to your favorites in the EAM Information Cockpit. Additionally. a panel providing further field values opens on the right-hand side of the screen (3).For each search result. Enterprise Search in EAM . All rights reserved. When you choose Details. The little red sign (2) indicates the search result that is currently being displayed in the Details panel. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 20 © 2016 SAP SE or an SAP affiliate company. the system provides a summary with up to nine field values of the document (1) and several links for gathering more information. 2 Personalization of the Input Help If you often execute the search based on the same criteria.1.3. 5. you can save your search criteria as favorites. see 5. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company.This example is taken from an S4/HANA system with a HANA database. 21 . All rights reserved. choose Save Favorite. You enter the search criteria.2. While working with the Enterprise Search. the corresponding connector for the notification search is MAINT_NOTIFIC_H. you can then select one of your favorite searches so that the system executes the search with the respective search criteria. see Searching with SAP NetWeaver Enterprise Search in SAP Library. and assign a name to your favorite search. For general information about EAM Enterprise Search. 3 Customizing View "Activate Enterprise Search for the Input Help" Before you can use the Enterprise Search as input help for EAM objects. 5. In this CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 22 © 2016 SAP SE or an SAP affiliate company. All rights reserved. To specify that these search criteria apply by default each time you open the input help for the notification. you want the notification result list to be restricted to notification type UA and planner group W01. view V_EAMS_ESH_CAT). you can also define that one favorite search is always executed when you open the input help for that application. The first column contains the technical name of the field and the second column shows the search category. you save the search as a favorite for your user by typing your user name in capital letters. This search is then automatically executed whenever you open the input help for the notification. You can specify for a combination of field name and search category in EAM whether you want to use the Enterprise Search when you open the input help for a specific field on the SAP Web UI. you have to activate the Enterprise Search in Customizing for Plant Maintenance and Customer Service under Maintenance Roles → Maintenance Worker → Activate Enterprise Search for the Input Help or in View Maintenance (transaction SM30.For each application. Enterprise Search in EAM .2. In this example. example. Hint: You have the option of defining customer-specific search helps for Web Dynpro fields in Customizing under Plant Maintenance and Customer Service → Maintenance Roles → Maintenance Worker → Configure Search Help Assignment (view V_EAMSC_UI_SHLP). so the Enterprise Search is available as input help in EAM Web Dynpro applications for the fields with the same technical field name as in the first column of the view. If you do not activate the Enterprise Search as input help or if the corresponding connector is not running properly. All rights reserved. the Activate checkbox is selected for all fields. By default. 23 . the Enterprise Search is not selected in the Customizing activity. The picture below shows the search screen of the simple search. the simple search opens for the input help. If an entry exists for any of these fields with a different search help. the Enterprise Search will not show up. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company. even if it is activated. (see 6. such as Confirmations or Jobs. If you select a category. By default. Enterprise Search in EAM . CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 24 © 2016 SAP SE or an SAP affiliate company. EAM_OBJECTS).3 Categories in EAM Search categories allow users to narrow down their search and filter search results.g. They allow you to enter a search term and only execute the search in a specific category. EAM_JOB) or group different connectors together into one search category (e. The picture below shows the search categories in the Search section of the Master Data Information Center. You create or delete search categories in the modeler when creating models or also in the Administration Cockpit.1). You can create a search category for a single connector (e. If you open the More menu.g. All rights reserved. the search is executed with all the connectors belonging to this category. a connector inherits the categories from its model. these categories are displayed beside the All Objects entry.5. You can assign both search models and connectors to specific search categories. This category groups together all the EAM connectors. you can also choose EAM Objects and execute your search in the EAM_OBJECTS category. When you have created search categories. In the Administration Cockpit (see 6.1). for example. In EAM. The SAP search models are normally delivered without any specification of categories. you choose the Menu tab page and open the context menu of the Master Data Information Center by clicking the right mouse button.You can view the category that is assigned to a specific Web Dynpro application in a specific PFCG-role. In the role SAP_COCKPIT_EAMS_MAINT_WORKER2 for the maintenance worker. All rights reserved. you can find the categories in the details Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company. search categories have been defined for all models. 25 . You choose Details and see that the category EAM_OBJECTS is assigned as search category to the Master Data Information Center. So the maintenance worker can use all search categories grouped together in the EAM_OBJECTS category when he searches for EAM documents in the Master Data Information Center. on tab page Categories. If you choose Maintain Categories. All rights reserved. additional categories can be added. Four categories are assigned to the connector EQUIPMENT_H. Enterprise Search in EAM . The value (EAM_OBJECTS) of parameter SEARCH_CATEGORY of the PFCG-role shown in the Display Roles picture above is a collection of several single categories.of the respective connector. In the Administration Cockpit. These category assignments are not transportable. the hierarchy of categories is visible and editable. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 26 © 2016 SAP SE or an SAP affiliate company. 4 as the release.4 Managing Cross-Model Attributes If there are attributes in various models with values that have the same meaning and common analysis is possible.com/nw_platform. On the Request Attributes tab page. you can add. you can group these values in a cross-model attribute.sap. 27 .com/nw_platform. See also SAP note 2274409 .You can specify your own customer-specific categories and relations in the popup. See section 6. When a connector is created.sap. choose Function-Oriented View → Search and Operational Analytics → Managing Search and Operational Analytics → Search-Specific Administration Tasks and Information.1 by selecting a search model and carrying out step 4 (Model Requests) of the guided activity. 5. Choose SAP NetWeaver 7. Cross-model attributes are independent of software components. Any changes made to a cross-model attribute therefore immediately affect all models that are assigned to this attribute. All rights reserved. the connector inherits the categories from its model. remove. Choose SAP NetWeaver 7. You process cross-model attributes in the ESH Modeler (see 6. For more information about Managing Search Categories. Information about categories is also stored in the search model. The procedure is explained step by step in chapter Managing Cross-Model Attributes of SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help. This allows you to search for attributes across several connectors or use a specific attribute to refine search results.2 for maintenance of categories in the search model. see SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help.Creation of Categories for Enterprise Search in EAM: Search Models and Connectors with an example from the EAM area. and maintain cross-model attributes in the lower right-hand screen area Assigned Common Attributes.2.4 as Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company. Under Application Help. On this Structure List tab page.5 Searches in EAM based on Enterprise Search Models The Enterprise Search models are also used in the structure list for searching for technical objects in EAM and in DDIC input helps for SAPGUI transactions. Under Application Help. If you have activated the business function Simplified Management of EAM Functions 3 (LOG_EAM_SIMPLICITY_3). 5.5. All rights reserved. the system shows a second tab page in the input help of the technical object. You can insert any technical object from the list into the Technical Object field by selecting it and choosing OK. Enterprise Search in EAM .the release.2. You can also use the SAP Enterprise Search in the input help of technical objects if you activate the SAP Enterprise search in Customizing for the technical object field EAMS_TEC_OBJ_NO with category EAM_TECHOBJ (see 5. Now you open the input help to view the assigned materials and navigate to superior levels in the structure list.1 Structure List for Technical Objects The structure list for technical objects was originally based on the DDIC search help EAMS_SHLP_ELM_TO_ES. If you activate both. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 28 © 2016 SAP SE or an SAP affiliate company. choose Function-Oriented View → Search and Operational Analytics → Managing Search and Operational Analytics → Search-Specific Administration Tasks and Information.3). you can use the combined search in the input help for technical objects in the following business objects:  Maintenance Order: o Initial screen o Header level (tab General Data) o Operation List o Operation Details  Maintenance Task List: o Initial screen (for technical object task lists) o Operation List o Operation Details  Maintenance Notification: o Header level (tab General Data)  Maintenance Plan: o Item List In the example below. to name just two examples. and provides you with essential information on the technical objects and their components in a tree table. the structure list with business function LOG_EAM_SIMPLICITY_3 and the SAP Enterprise Search in Customizing. 5. which also closes the popup. the system displays a hierarchical structure of the technical object and its assigned materials. you want to create a maintenance order and you have already specified a technical object in the corresponding field. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company.For more information about the structure list in the input help of technical objects. for example. see Selection of Technical Objects from the Structure List in SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help.5. The collective input help offers additional search helps if the connector is running.sap.2 Input Help in SAPGUI There are several DDIC search helps for SAPGUI transactions that are based on Enterprise Search models. 5. In the transaction Display Equipment (IE03). All rights reserved. both a simple search as well as an advanced search based on Enterprise Search are available. The connectors with category EAM_TECHOBJ are used to find the objects that are displayed in the structure list. Choose SAP ERP → Application Help → SAP Library → SAP ERP Central Component → Logistics → Plant Maintenance (PM) → SAP Web User Interface for Plant Maintenance (PM).com/pcat_erp. 29 . This means the Advanced Search for Equipment (Enterprise Search) appears as the input help for the Equipment field when the connector EQUI is running. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 30 © 2016 SAP SE or an SAP affiliate company. you can display a search help in ABAP Dictionary (SE11). The search help EQUI_ES provides these two search helps as a part of the collective search help assigned to the Equipment field. In the ABAP Dictionary (transaction SE11) you can check which connector the search uses. In the Search help parameter list. All rights reserved. the corresponding search connector is displayed as the Default value of the parameter OBJECT_TYPE_ID. In this example. the default value is ‘EQUI'. To figure out which search connector the search is based on. these menu entries are not shown in the list for searches. Enterprise Search in EAM .If the connector is not active. the HANA connectors are used by the search helps (in our example.1. In S4/HANA systems.If you have created your own search helps or search models that you want the search helps to use. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Enterprise Search in EAM © 2016 SAP SE or an SAP affiliate company. refer to the table in chapter 5. EQUIPMENT_H instead of EQUI. 31 . All rights reserved.3). make sure that you have adapted the name of the search connector. To take a closer look at the connector models.sap. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 32 © 2016 SAP SE or an SAP affiliate company.4 as the release. 6. You can work in the Administration Cockpit if the cockpit role SAP_ESH_ADMIN is assigned to you. choose Actions (3) and select Update in the dropdown menu. which indicates that a newer version of the search model exists on which the connector is based. In the example below. the checkbox in the Modified column is selected. you can check if the search connectors are running and correctly indexed. All rights reserved. detailed documentation about the Administration Cockpit in the SAP Library. select the corresponding table entry. Under Application Help. On the initial page. You can find the official. To update the current connector version. This chapter does not focus on the correct set-up and daily administration of the Enterprise Search. you should be familiar with the Connector Administration Cockpit and the Search and Analytics Modeler for search models. Configuration and Administration Tools .1 Using the Connector Administration Cockpit The following pages are intended to give you an introduction to the Administration Cockpit. You open the cockpit in a browser window via transaction ESH_COCKPIT.6 Configuration and Administration Tools To be able to work with the Enterprise Search. For information about the necessary administration tasks. the red box (1) shows two connectors for pieces of equipment and functional locations (technical names: EQUI and BUS0010). (2)). but rather on how you as a very experienced user or consultant can check the search model and connector status. you can navigate to the Modeler for Search and Analytics by using the Modeler link (4). Choose SAP NetWeaver 7. they have a number of entries and are activated for the search (the checkbox in the Search column is selected. see Managing Search and Operational Analytics in SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help. Additionally. Both connectors are set up correctly because their status is Active.com/nw_platform. choose Function Oriented View → Search and Operational Analytics. First select the corresponding software component in the popup (here SAPAPPLH). The popup closes and you go back to the cockpit. Initially. It therefore can't be found in the cockpit list. the connector CONFIRMATION_PM_H is not running in the system. The connectors are locked until this job is finished. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Configuration and Administration Tools © 2016 SAP SE or an SAP affiliate company. The system provides a messages that the connector will be created.1 Creating and Indexing a Connector In the following example.1. 6. To (re-)create connectors. The system lists all search models of the selected software component. 33 . All rights reserved. the search connector has the status New.Every time the cockpit is opened. Choose one or more search models for which you want to re-create connectors and choose Create Connector (1). choose Create. a background job looks for changes made to the models in client 000. In the job overview (transaction SM37). Models that are already running are grayed out so that connectors for these models cannot be created. you can check when this job (ESH_IEF_IMP_OM_UPDATE_CONTENT<client>) is finished. All rights reserved. the indexing preparation is repeated for connector EQUIPMENT_H. If an error occurs while creating a connector and the status is Error While Preparing or Error While Indexing. In this example. You can also filter the list according to the connector status (3). Configuration and Administration Tools . you should restart the step where the creation stopped. When you create a connector. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 34 © 2016 SAP SE or an SAP affiliate company. the dependent connectors are also created if they're not available yet. when you Refresh (2) the list of connectors.The connector status changes to Preparing (1). 1. 35 . see chapter 5. or model name on the General tab. you can see if categories are already available or you can maintain them.2 Connector Details When you select a connector in the Administration Cockpit.3 Categories in EAM. you can see more connector details at the bottom of the screen. you can check the messages of the last job run. software component. you have to start or schedule indexing for connectors in the following cases:  In the SAP HANA-based variant: You are using connectors that do not provide database support.6. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Configuration and Administration Tools © 2016 SAP SE or an SAP affiliate company.3 Real-Time Indexing To make the objects in the connectors available in the search. 6. You can find general information about the connector such as status. On the Job Log tab.1.  In the TREX/BWA-based variant: You have to start or schedule indexing for all connectors. All rights reserved. For more details. On the Categories tab. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 36 © 2016 SAP SE or an SAP affiliate company. For more information about Controlling Real-Time Indexing. Under Application Help.sap. While creating a search connector. The real-time indexing ensures that a new data record is immediately added to the respective index. All rights reserved. choose Function Oriented View → Search and Operational Analytics → Managing Search and Operational Analytics.4 as the release.com/nw_platform. The indexing job must run properly and can be started and stopped in the Administration Cockpit manually by selecting System Settings → Control Real-Time Indexing. Configuration and Administration Tools . you can choose whether or not you want real-time indexing for the connector. indexing runs either as full indexing or as delta indexing. see SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help. Choose SAP NetWeaver 7.In these cases. All rights reserved. in this case the field is grayed out. Choose Copy Settings (1) to copy the parameters to the selected connectors. you can open an Input Form (2). For some connectors it is not possible to choose real-time indexing. the system lists all dependent connectors in a popup. To copy scheduling parameters such as the Start Immediately or Real-Time Indexing (3) to all of them. You start the scheduling by closing the popup with the OK button. 37 . Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Configuration and Administration Tools © 2016 SAP SE or an SAP affiliate company. In the Input Form.If a connector is selected for Schedule Indexing (1). you can choose the parameters you want to copy and then select the connectors (2). you can define where a link from the search result list should open. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 38 © 2016 SAP SE or an SAP affiliate company. you can additionally specify the priority.4 Link Navigation Depending on UI Technology In the Connector Administration Cockpit. For activated entries. Choose System Settings → Maintain UI Technologies and select the checkboxes in the corresponding popup. The available UI technologies therefore have to be maintained. All rights reserved.6.1. Configuration and Administration Tools . SBSFNDH) or application components for grouping the models (here PM). you see the Software Components listed as folders (for example. in which all corresponding models are collected. The modeler guides you through all necessary steps to create or enhance a model. 6. On the left-hand side of the initial screen. You open the Search and Analytics Modeler in a browser window via transaction ESH_MODELER. 39 . detailed documentation about the Search and Analytics Modeler in SAP Library. The sub-folders can be software components included in this higher-level software component (for example.1). The picture below shows model EQUIPMENT_H of software component SAPAPPLH in display mode.2 Using the Search and Analytics Modeler You find the official. All rights reserved.6.4 → SAP NetWeaver Library: Function Oriented View → Search and Operational Analytics → Creating Search and Analysis Models → Creating or Extending Search and Analysis Models.2. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Configuration and Administration Tools © 2016 SAP SE or an SAP affiliate company. The modeler is mainly used to create your own search models or extend the models delivered by SAP. SAPAPPLH).1 Creating or Extending Search and Analysis Models Detailed information about creating or extending an existing model delivered by SAP is described in the SAP Library under Technology Platform →SAP NetWeaver → 7. You can also access the modeler from the Administration Cockpit (see 6. SAP Business Suite Foundation Search on HANA . database tables of table type Column Store are used as the data sources.In the following section. some features of the modeler are described with relation to their influence on the UI. and you can define a conversion routine. Step 1: Model Properties Here you can define a specific icon for each object type and define search categories (see chapter 5. Step 2: Model Nodes For TREX-based models. suppresses the leading zeros in front of the vendor number. you can select the checkbox Contains Text (if the field value is a text string). For HANA-based search models. you can specify a key. All rights reserved. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 40 © 2016 SAP SE or an SAP affiliate company. In the Attributes section of each node. the conversion routine ALPHA. which is entered for attribute ELIEF.3) in the search model. DDIC structures containing the node fields are used as the data source. Configuration and Administration Tools . refer to the SAP Library documentation about the Modeler mentioned above. For technical details. In the example below. In this example you see a folder with additional information for notification items. For detailed information about the rules that apply for cardinalities. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Configuration and Administration Tools © 2016 SAP SE or an SAP affiliate company. you specify the cardinality and reverse cardinality of each individual node in relation to its superior node (1). a folder for this subquery appears in the details of each single result line (2). If you want an attribute to be used as a filter criterion on the left side of the search result list (3). Nav.) table column. All rights reserved. activities. you can search for any string in the values of this attribute (1). The text that you enter as the attribute description is displayed as search criteria in the dropdown menu of the search UI (2). and statuses in the details of the selected notification. If you select the checkbox in the Subquery table column. Step 4: Model Requests If you select the checkbox in the Freestyle table column for an attribute. you have to select the checkbox in the Interactive Navigation (Int. see Defining Node Relationships in SAP Library. tasks.Step 3: Node Relations On the Node Relations tab page of the ESH Modeler. 41 . In this example. the long text or on other parts of the search results list. the summary. On the Response Attributes tab page. Configuration and Administration Tools . the details. the attribute Equipment Description will be displayed in the Summary and in the Details. You can thus determine whether an attribute is to be displayed in the title. you can set the relevant ABAP authorization objects. you can specify in which UI area of the search results you want each attribute to appear.Step 5: Node Response On the Authorization tab page. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 42 © 2016 SAP SE or an SAP affiliate company. but not in the Title. We recommend that you include search software component SAP_BASIS for the user authorizations when you create a customer-specific component. All rights reserved. the navigation target is not displayed as link. For one of the navigation IDs you can select the Object Link radio button and thereby determine the navigation target of the summary title object. you have to provide a navigation instruction and a description that the system uses as link text (4).1. For each navigation target that you want to be displayed as a link in the footer of the summary. Navigation Targets are also displayed in the summary of the result list items. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Configuration and Administration Tools © 2016 SAP SE or an SAP affiliate company. In this example. You can determine several subqueries that you can open via links in the summary of each search result item.4).On the Related Actions tab page. the entry CBON has no navigation instruction provided and is therefore not displayed as a link (3). 43 . All rights reserved. the UI Technology: Web Dynpro (Application Server) (1) is selected and four navigation IDs are defined. In addition to related requests. a separate Web Dynpro window opens and shows this piece of equipment in display mode. the Object Link radio button is selected for the DISPLAY_EQUIPMENT navigation ID (2). So if you click on it in the search results list. whereas the entries in lines three and four have navigation instructions and provide the links for Add to Favorites and Display Equipment in Asset Viewer. depending on the user interface (see 6. these functions are executed (4). In our example. They provide links to applications you can navigate to. In our example. If you click on them in the results list. you can specify Related Requests. If you do not provide a navigation instruction. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 44 © 2016 SAP SE or an SAP affiliate company. 6. refer to SAP note 2183657 . which contains a lot of background information. Configuration and Administration Tools . For more information about Transporting Search Models. All rights reserved. see SAP Library for SAP NetWeaver Platform on SAP Help Portal at http://help.4.Analysis of import errors for report-based transport of Enterprise Search models. The connector names are entered as parameters in step 3 Select Models to Create Connectors (1).2 Transport of Model Corrections The transport of search model correction has changed from transporting table entries to transporting generated xml-like reports. see Defining Node Responses in SAP Library. use the Job Monitor. choose SAP NetWeaver 7. choose Function-Oriented View → Search and Operational Analytics → Managing Search and Operational Analytics → Technical Operations Manual →Search-Specific Administration Tasks and Information. For questions and answers about transporting search models using the Note Assistant (SNOTE).2. This has the advantage that you now have a versioning of the respective report. For error analysis in transport logs.sap.3 Using Task Lists to Create and Index Connectors For creating connectors and indices you can use a preconfigured task list called SAP_ESH_CREATE_INDEX_SC. Run the respective task list in STC01 for an entire software component (for example SAPAPPLH) or for a set of connectors. To check the job log of the background job. The task list can be started in the background (2). see the very useful SAP note 1874091 .com/nw_platform. As a release. In the Application Help.SNOTE: Frequently Asked Questions (ESH Program-Based Model Transport). 6. The job name is filled in automatically and the job can be entered by choosing Execute (F8).For detailed information about the navigation targets. Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Configuration and Administration Tools © 2016 SAP SE or an SAP affiliate company. 45 . All rights reserved. you can see the selected connectors.In the Job Log. their status (Indexing/ Active). and at the end the success-message for the task list run. the registration for real-time indexing. use URL address http://service.How to migrate Embedded Search from TREX to HANA? 2224527 .Cannot create index on expression with datatype LOB: Value_String 1730102 . the Embedded Search or Enterprise Search was known under the name SAP NetWeaver Enterprise Search and was treated as a part of SAP NetWeaver technology.com/sap/support/notes/<notenumber>. Additional Documentation . you can find the current version of the road map SAP HANA enterprise search under the topic Platform.Release Information for SAP Enterprise Search 7.com/saproadmaps.2 Official Road Map The official road map for Enterprise Search can be found on the SAP Service Marketplace at http://service.3.sap. 2054157 . From here you can navigate to the following sections:  What’s New – Release Notes  Installation and Upgrade Information  Getting Started with SAP NetWeaver Enterprise Search  Configuration and Deployment Information  Security Information  System Administration and Maintenance Information  Application Help  Development Information  Additional Information 7.Embedded Search for SAP Fiori 2228932 .7 Additional Documentation 7. You can find the current documentation for SAP NetWeaver Enterprise Search on SAP Help Portal at Technology Platform → SAP NetWeaver Enterprise Search → 7. 7.3 and Older Up to SAP NetWeaver 7. In the Database & Technology section.HANA-Enabled Search Models in the SAP Business Suite 2074166 . Add the respective note number in the placeholder <notenumber>.3 SAP Notes For quick access to SAP Notes via an internet browser. All rights reserved.4 CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 46 © 2016 SAP SE or an SAP affiliate company.3.Release Restrictions for SAP NetWeaver 7.sap.5 for SAP Fiori 1861013 .1 NetWeaver 7. All rights reserved.sap.sap. connectors.1 – March 2016  SCN-Blog with Developer Guide: Developer's Guide Enabling Business Objects for Embedded Search of Oct 2012  Wiki Home Page in SCN (https://wiki. use component BC-EIM-ESH for issues concerning the search itself.sap. PM-ESH If you want to open a customer incident regarding the Enterprise Search.scn. 7.com/community/enterprise-search).6 Components for Incidents BC-EIM-ESH. 7.com/wiki/display/BI/SAP+Business+Warehouse+Home) SAP NetWeaver Business Warehouse → SAP Business Warehouse Home → Trex → BC-EIM-ESH . and results. For issues with the EAM search models.scn. 47 . You can also search for SAP notes on these components.5 Guides and Wiki Links  HANA Search Developer guide 1.7 Transaction Codes and Reports for ES Transaction Codes for Enterprise Search Transaction Code Short Text ESH_ADM_SERVER_GROUP Set Server Group ESH_ADM_TREX_DEST Set TREX Destination ESH_COCKPIT Connector Administration Cockpit ESH_EXTR_USER ESH Set Extraction User for Indexing ESH_IMG Customizing Enterprise Search ESH_MODELER Search & Analytics Modeler ESH_QL_CUST Customize Query Logging Guide for Enterprise Search in Enterprise Asset Management (EAM) CUSTOMER Additional Documentation © 2016 SAP SE or an SAP affiliate company.7.com/wiki/display/WHP/Home) with page Technology Troubleshooting Guide Main Page under SAP NetWeaver you find Embedded Search TSG (2011)  Wiki Home Page for BI (https://wiki.Enterprise Search with Trouble Shooting Page.  EAM Web UI Implementation Guide in SCN 7. use component PM- ESH.4 SCN Blogs You may find interesting blogs about Enterprise Search topics in the SAP Community Network under Enterprise Search (http://scn. For more information.  If search models have been modified. the changes exist only in client 000 (or in the development system in the development client). ESH_QUERY_LOG Enterprise Search Query Log ESH_REG_REMSEARCH Configuration of Remote Search ESH_SEARCH Enterprise Search UI (only ERP) ESH_TEST_SEARCH Test Search Reports for Enterprise Search The following reports are available for the Enterprise Search (transaction SE38). You can compare source and target systems to find missing programs. Start the report for the respective search software component in transaction SE38 to transmit the changes to the client in which it is executed.  You can use the report ESH_IEF_SNOTE__FIND_PROGRAM to find generated programs of the Enterprise Search. Additional Documentation . Enter the report name in transaction SE38.  You can use the report ESH_IEF_SNOTE__SHOW_IMPORT_ERR to display the error log when updates of search models are imported into a client.  You can use the report ESH_EX_SET_EXTRACTION_USER to create a user with sufficient authorization for the data extraction. enter a search software component and search terms. You can use the report ESH_IEF_IMP_OM_UPDATE_CONTENT to propagate the changes to the testing client. and execute the report. Enter the report name and the respective software component in transaction SE38 and execute the report. CUSTOMER Guide for Enterprise Search in Enterprise Asset Management (EAM) 48 © 2016 SAP SE or an SAP affiliate company. All rights reserved. see SAP Note 1345160.  You can use the report ESH_EX_FU_CPOINTER_REORG to reorganize change pointers that are stored in table ESH_EX_CPOINTER. Make sure you have stopped real-time indexing in the Administration Cockpit before you execute the report. . epx#trademark for additional trademark information and notices. All rights reserved.com/contactsap © 2016 SAP SE or an SAP affiliate company.sap. sap.com/corporate-en/legal/copyright/index. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP SE or an SAP affiliate company. . Please see http://www.www. All other product and service names mentioned are the trademarks of their respective companies. SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP SE (or an SAP affiliate company) in Germany and other countries.