Foreign Part 145 Approvals - OJT Logbook

Foreign Part 145 approvals- On-the-Job Training logbookEuropean Aviation Safety Agency AMO Logo, Name, EASA Approval number Enter aircraft type Enter the intended certifying staff category (i.e. B1) Mr/MRS/MS. name SURNAME Trainee Name Contents 1. Contents...............................................................................................................................................................................1 2. Scope and Applicability.........................................................................................................................................................2 3. OJT and Personnel Data.......................................................................................................................................................3 3.1 OJT Data............................................................................................................................................................................3 4. OJT Programme....................................................................................................................................................................4 4.1 Logbook Filling Instructions...............................................................................................................................................4 4.2 Logbook Records...............................................................................................................................................................5 4.3 Logbook Additional Optional Records..............................................................................................................................13 4.4 Compliance Report..........................................................................................................................................................14 5. Final assessment of the OJT...............................................................................................................................................15 1. TE.CAO.00125-002 © European Aviation Safety Agency. All rights reserved. ISO9001 Certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA-Internet/Intranet. An agency of the European Union Page 1 of 15 personnel data. Confirm revision status through the EASA-Internet/Intranet. The Part 145 Organisation shall be appropriately approved on the specific aircraft type in accordance with Annex II (Part-145). EASA Approval number Enter aircraft type Enter the intended certifying staff category (i. All rights reserved.CAO. etc. This OJT logbook is intended to:  be used by a Part 145 AMO delivering the OJT. in order to endorse the first A/C type in the EASA Part 66 Aircraft Maintenance license A/C C/S and S/S shall be able to demonstrate he/she followed an appropriate On-the-Job (OJT) training as detailed in the Appendix III to Annex III (EASA Part-66).  be completed by the Part 145 AMO delivering the OJT to meet the objective and content of the OJT and the related assessment in accordance with Appendix II to AMC to Part 66  be customised for the specific aircraft type intended to be endorsed in the EASA Part 145 individual authorisation  be used for recording the required information (tasks performed. ISO9001 Certified.e. assessment. For similarity the “Foreign Part 145 approvals – Aircraft type training (theoretical and practical) and On-the-Job training” UG.Foreign Part 145 approvals.122-xxx requires in the case of A/C C/S and S/S not holding an EASA Part 66 AML.) TE. that such staff shall be able to demonstrate he/she followed an appropriate On-the-Job (OJT) training as detailed in the Appendix III to Annex III (EASA Part-66) for the first A/C type endorsed in an EASA Part 145 individual authorization. Scope and Applicability Following a recent amendment of Part 66 {(EC) 1149/2011}.CAO. An agency of the European Union Page 1 of 15 . Copies are not controlled. Proprietary document. Name.00.00125-002 © European Aviation Safety Agency.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. name SURNAME Trainee Name 2. B1) Mr/MRS/MS.. e. Page 1 of 15 TE. Signature Surname Date of birth Place of birth Signature Practical type training data Start date Assessor (s) Data Certification Authorisation Nr. etc. evaluating .). Proprietary document. which is/are not necessarily the practical assessor. An agency of the European Union . Confirm revision status through the EASA-Internet/Intranet. Name. Signature End date Maintenance Organisation* (Name and EASA approval nr) Location 1 the day-to-day supervision of the OJT programme in the Part 145 AMO is done by supervisor(s). The supervisor is responsible to countersign the tasks and release the maintenance tasks as the trainee is still not qualified to do so. managing objectively and positively debriefing sessions.1 OJT Data Trainee Data Name Supervisor (s) Data1 Name Surname Name Surname Certification Authorisation Nr. be safety-orientated. All rights reserved. B1) Mr/MRS/MS.00125-002 © European Aviation Safety Agency.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. reporting. determining the need for extra training or reorientate the training. be designated by the approved maintenance organisation to carry out the supervision. be competent for the selected tasks. handling trainee’s reactions and cultural issues.CAO. giving training. be capable to coach (setting objectives.Foreign Part 145 approvals. Copies are not controlled. performing supervision. OJT and Personnel Data 3. name SURNAME Trainee Name 3. Therefore the supervisor shall have certifying staff or support staff privileges relevant to the OJT tasks . EASA Approval number Enter aircraft type Enter the intended certifying staff category (i. ISO9001 Certified. assessor) Maintenance data task description and identification number (i. To be filled by the trainee This filed is used to provide detailed reference to the task carried out. but necessarily on A320(CFM56) when related to OJT tasks on the engine. Operation performed - 10. TE. This field is pre-filled Estimated time (in minutes) to accomplish the task. name SURNAME Trainee Name 4. Reference ET (min) - 7. A/C Reg. To be filled by the trainee The aircraft registration shall correspond to the same aircraft type for which the OJT is conducted. 6. - 8. Date when the specific task is carried out.e.Foreign Part 145 approvals. shall be identified/ included as “mandatory tasks” in the practical training logbook Optional tasks. The decision to perform or not these optional tasks is at the discretion of the Part 145 AMO delivering the OJT (i. This field is pre-filled Additional optional tasks are recommended to be completed based on the availability of the aircraft/related maintenance activity.e. a B1 category practical training on A320(CFM56) may be performed on a A320(V2500) aircraft when related to OJT tasks on the landing gear. EASA Approval number Enter aircraft type Enter the intended certifying staff category (i. Proprietary document. An agency of the European Union Page 1 of 15 .e. Mandatory tasks. 2. B1) Mr/MRS/MS. Self-explanatory.CAO. Copies are not controlled.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. Supervisor. This field is pre-filled ATA Chapter identification. The engine difference shall be also considered when performing maintenance tasks applicable to the engine. Supervisor’s signature - Description/ Remarks Task progressive identification number. Date - 9. 3. This field is pre-filled A/C registration marks. Self-explanatory. To be filled by the trainee Precise reference to the aircraft logbook and/or work card / work package shall be entered in this block to retrieve the evidence of the task carried out. This field is pre-filled At least 50% of the tasks contained in Appendix II to AMC to Part 66. Trainee’s signature 11.00125-002 © European Aviation Safety Agency. Quality Manager. Name. Op tio n ID ATA Subject - M 4. All rights reserved. M/O O 5. AMM ATA-Sub-Task). which are relevant to the particular aircraft type.1 Logbook Filling Instructions ID 1. This field is pre-filled Subject identification as per Appendix II to AMCs of Part 66 (Aircraft type practical experience and On-the-Job Training List of Tasks). ISO9001 Certified. For example. Confirm revision status through the EASA-Internet/Intranet. OJT Programme 4. An agency of the European Union Page 1 of 15 . B1) Mr/MRS/MS. All rights reserved. Other tasks than those in the Appendix II may be considered as a replacement when they are relevant. be distributed in order that all ATA chapters and task categories (servicing. This includes whether the tasks is mandatory or not (column 4). Name. Proprietary document. the reference of the specific maintenance tasks selected (column 5) and the time to perform it (column 6).On-the-Job Training logbook European Aviation Safety Agency AMO Logo. other more complex maintenance tasks shall also be incorporated and undertaken as appropriate to the aircraft type.Foreign Part 145 approvals. removal/installation.2 Enter aircraft type Enter the intended certifying staff category (i. be selected among those applicable to the type of aircraft and licence (sub)category applied for. when available. Copies are not controlled. etc. criticality. variety. deactivation.00125-002 © European Aviation Safety Agency. frequency. ISO9001 Certified. Grey blocks are intended to be prefilled by the organisation delivering the OJT ensuring pre-identification of specific tasks to be carried out.) are covered. EASA Approval number 4.CAO. The tasks selected shall be not less than 50% of the tasks contained in the Appendix II to AMC to Part 66 and shall:       be representative of the aircraft and systems both in complexity and in the technical input required to complete that task. the feedback from in-service experience or customer specific additional training needs. TE. novelty etc…. trouble shooting. be representative of the maintenance to be performed in terms of complexity. take into account. name SURNAME Trainee Name Logbook Records The Organisation delivering the OJT is responsible to prepare and complete the table below. component location.. safety. include components unique to the type. While relatively simple tasks may be included. Confirm revision status through the EASA-Internet/Intranet. or type-specific maintenance practices.e. …………………….. …. Operation performed Time limits/Maintenance checks …. ……………………. Copies are not controlled.. …. ………………. …… TE.. …. …. Trainee’ signature 11. ATA 3. ET (min) 7. M/O Enter aircraft type Enter the intended certifying staff category (i... Reference 6.. ………………. A/C Reg 8.. ………………. EASA Approval number 1. …. …. …. …. name SURNAME Trainee Name 10. B1) 5. All rights reserved. Confirm revision status through the EASA-Internet/Intranet.. …. …… Lifting and shoring …. ……………………. ….Foreign Part 145 approvals.. …… Placards and Markings …. An agency of the European Union Page 14 of 15 Mr/MRS/MS. …. ISO9001 Certified. …. Name. ……………………. ……………………. ………………... …………………….e. ………………. …………………….00125-002 © European Aviation Safety Agency. …… Dimensions/Areas …. …… Leveling/Weighing …. Proprietary document. Subject 4. ………………. …… Parking and Mooring …. ID 2.. Supervisor’s signature . …… Towing and Taxiing ….CAO.. …. ….. Date 9. ……………….On-the-Job Training logbook European Aviation Safety Agency AMO Logo. e. …. EASA Approval number 1. ……………………. Supervisor’s signature . Copies are not controlled. …. …. ….. ……………………. …………………….CAO. ……………….. ………………. name SURNAME Trainee Name 10. M/O Enter aircraft type Enter the intended certifying staff category (i. …. …… Vibration and Noise Analysis …. …… Communications …. …… Fire protection ….Foreign Part 145 approvals.. ……………………. Date 9. ………………... …… Air Conditioning …. …. …. B1) 5. Proprietary document. …. Operation performed Servicing ….. ID 2. ………………. …. ……………………..00125-002 © European Aviation Safety Agency. …… Electrical Power …. ………………. ………………. A/C Reg 8. …… Equipment/Furnishings ….. …. …… Auto flight …. Trainee’ signature 11. Reference 6.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. ATA 3. ET (min) 7.. …. Confirm revision status through the EASA-Internet/Intranet. ……………………. An agency of the European Union Page 14 of 15 Mr/MRS/MS. …. Name. …. …………………….. …... …………………….. ……………….. …. ……………….. ISO9001 Certified. Subject 4. …. All rights reserved. …… TE.. ……………………. EASA Approval number 1. ……………….Foreign Part 145 approvals. …… Indicating/recording systems …. ET (min) 7. Reference 6. …. ISO9001 Certified. ….. Proprietary document. …. …. …. All rights reserved. …. Name. B1) 5. An agency of the European Union Page 14 of 15 Mr/MRS/MS. ……………………. ……………………. …. ….. ID 2. ………………... Confirm revision status through the EASA-Internet/Intranet. …… TE. ………………. ……………….00125-002 © European Aviation Safety Agency. name SURNAME Trainee Name 10. Date 9. ….. …… Fuel …. ……………………. ……………….. ………………. …... ……………………. …… Ice and rain protection …...e. …. …… Hydraulics …. M/O Enter aircraft type Enter the intended certifying staff category (i. …. …...CAO. ……………………. Subject 4. …… Lights …. Supervisor’s signature . …. ATA 3. Operation performed Flight Controls …. ……………………. Copies are not controlled. …… Navigation …. ……………….. Trainee’ signature 11. …… Landing Gear ….. …. ……………….. …..On-the-Job Training logbook European Aviation Safety Agency AMO Logo. ……………………. A/C Reg 8. …… Airborne Auxiliary power …... Trainee’ signature 11. ……………………. ….... ……………….. …. …. All rights reserved. …… Vacuum systems …. ……………………. ………………. …… TE.CAO. …… Structures …. ……………………. …… Central Maintenance System …. ….. ……………………. ATA 3. B1) 5. ….. ……………….... ………………. Proprietary document. ….. …… Doors ….. ISO9001 Certified. Copies are not controlled. Confirm revision status through the EASA-Internet/Intranet. name SURNAME Trainee Name 10. Operation performed Oxygen …. Supervisor’s signature . Name. …. ………………. …. ……………….e. …. Date 9. A/C Reg 8.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. ….. ……………………. Subject 4. M/O Enter aircraft type Enter the intended certifying staff category (i.Foreign Part 145 approvals. Reference 6. An agency of the European Union Page 14 of 15 Mr/MRS/MS. ……………….. ET (min) 7. …………………….00125-002 © European Aviation Safety Agency. …… Water/Waste …. …. ……………………. …… Pneumatic systems …. EASA Approval number 1. ….. ………………. ID 2. …. …. …. ……………………. …. ……………….. A/C Reg 8.. ……………………. …. ………………. …. All rights reserved. ……………………. ………………. …… Wings …. …. …... Reference 6. …… Main Rotors …. ISO9001 Certified. …. ………………. …. name SURNAME Trainee Name 10. …. ………………. …. ……………………. …. ………………. …… Propeller ….CAO. ….. …. Proprietary document.Foreign Part 145 approvals.. ……………………. Copies are not controlled.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. ……………………. …… Tail Rotors ….e. …… TE. Confirm revision status through the EASA-Internet/Intranet.. ……………………... …. Date 9. …. …… Rotor Drive …. ID 2.. ………………. …… Rotorcraft flight controls …. …… Tail Rotor Drive …. An agency of the European Union Page 14 of 15 Mr/MRS/MS. Trainee’ signature 11. ……………………. …. …. Operation performed Windows ….00125-002 © European Aviation Safety Agency... ET (min) 7. Name. EASA Approval number 1... M/O Enter aircraft type Enter the intended certifying staff category (i. …. Subject 4. …………………….. ………………. Supervisor’s signature . ATA 3.. B1) 5. . EASA Approval number 1. …. ……………….On-the-Job Training logbook European Aviation Safety Agency AMO Logo. ….. …. …… Piston Engines …. piston …. ………………. …. ….. …. Trainee’ signature 11.. ……………………. name SURNAME Trainee Name 10.. ………………. ……………………. …… Turbine Engines …. …… Engine Controls ….Foreign Part 145 approvals. …… Ignition systems. ……………………. …. Operation performed Power Plant …. …………………….. ID 2. Copies are not controlled. Proprietary document. …… Fuel and control. ……………………. piston …. ………………. Name. …...00125-002 © European Aviation Safety Agency. All rights reserved.. …… Fuel and control. ………………. turbine …. ……………………. …… Ignition systems.CAO. …. M/O Enter aircraft type Enter the intended certifying staff category (i.. B1) 5.. Date 9. Reference 6. ………………. …. …. Subject 4.. turbine …. ……………………. Confirm revision status through the EASA-Internet/Intranet. …… TE. An agency of the European Union Page 14 of 15 Mr/MRS/MS. ISO9001 Certified. ATA 3. A/C Reg 8.. ……………………... ……………….. ………………. ET (min) 7. …. …. …. Supervisor’s signature .e. …. …. …... …... …………………….. …… Exhaust. …. ………………. ……………………. …. …… Accessory gear boxes ….. …………………….00125-002 © European Aviation Safety Agency. EASA Approval number 1. ISO9001 Certified. Date 9.CAO.. piston …. …. …. Subject 4. …… Oil ….. Reference 6. …… TE. …… Turbines.Foreign Part 145 approvals. …. ……………….. An agency of the European Union Page 14 of 15 Mr/MRS/MS. ………………. …… APU …. …. ……………………. Proprietary document. Trainee’ signature 11..e. B1) 5. ………………. …………………….On-the-Job Training logbook European Aviation Safety Agency AMO Logo. …. …. ………………. turbine …. ……………….. …… Exhaust. Copies are not controlled. …. ATA 3. …. …… Engine water injection …. ET (min) 7.. ……………………. name SURNAME Trainee Name 10. …… Starting …. ID 2. ……………….. Supervisor’s signature . Name. piston engines …. ….. All rights reserved. …. …. Confirm revision status through the EASA-Internet/Intranet. Operation performed Engine Indicating …. ………………. M/O Enter aircraft type Enter the intended certifying staff category (i. …. …………………….. …. ……………………. ………………. A/C Reg 8... …. …………………….. Confirm revision status through the EASA-Internet/Intranet. Copies are not controlled. Trainee’ signature 11. Supervisor.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. Subject 4. Reference 6. Quality Manager. Operation performed Mr/MRS/MS. The table below is intended to be hand written (add rows as necessary). TE. This need may be identified by the Part 145 AMO delivering the training (i.3 3.00125-002 © European Aviation Safety Agency. Proprietary document. ISO9001 Certified. this part may be used to record evidence of a different maintenance task performed to satisfy the same requirement. EASA Approval number 1. An agency of the European Union Page 14 of 15 . All rights reserved. M/O Enter aircraft type Enter the intended certifying staff category (i. assessor) In particular. In this case a cross reference shall be made between the two tables to identify the task which is replaced under the responsibility of the supervisor countersigning the corresponding raw. A/C Reg 8. B1) 5. Supervisor’s signature Logbook Additional Optional Records The completion of this part is optional and intended to be used when the need exist to record additional data which was not possible to be entered in the previous pre-filled logbook.CAO. ATA 4. name SURNAME Trainee Name 10. ID 2.e.Foreign Part 145 approvals. Date 9. when a pre-filled task required in the logbook cannot be completed due to unavailability of the particular maintenance activity.e. ET (min) 7. Name. TE. ATA 4.. ET (min) 7. This report shall be signed before the final assessment. Date ………………………………………. Quality manager).4 3. Reference 6. Name. All rights reserved.e. A/C Reg 8. Trainee’ signature 11.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. M/O Enter aircraft type Enter the intended certifying staff category (i. Proprietary document.e.. Confirm revision status through the EASA-Internet/Intranet. (to be completed for each group) Group Number of tasks applicable to the A/C type Number of tasks effectively performed Percentage (%) of tasks effectively performed against the applicable tasks (Should be at least 50% of the applicable tasks on each row) Time limits/Maintenance checks Dimensions/Areas ……….CAO. ID 2. Date 9. Subject 4. ISO9001 Certified. Supervisor’s signature Compliance Report The intent of this table is to provide a compliance report demonstrating that the OJT meets the standard required by Appendix III to Part 66. An agency of the European Union Page 14 of 15 . B1) 5. This person undertakes the responsibility on behalf of the Organisation that the OJT program meets the standard required by Appendix III to Part 66. ………………………………………. Place ……………………………………….Foreign Part 145 approvals. In particular. EASA Approval number 1. Operation performed Mr/MRS/MS. This table is to be completed by the Organisation delivering the OJT training..00125-002 © European Aviation Safety Agency. Name & Title Approval signature (*) (*) this approval signature shall be entered by a responsible person of the Organisation providing the training (i.. the table shall indicate the percentage of tasks effectively performed against the tasks contained in the Appendix II to Part 66 which are applicable to the aircraft type. Copies are not controlled. name SURNAME Trainee Name 10. CAO. name SURNAME Trainee Name 10. Subject 4. Date 9. Proprietary document. An agency of the European Union 8.On-the-Job Training logbook European Aviation Safety Agency AMO Logo. Copies are not controlled. Operation performed Page 14 of 15 Mr/MRS/MS. M/O Enter aircraft type Enter the intended certifying staff category (i. B1) 5. A/C Reg TE. Supervisor’s signature . EASA Approval number 1. ET (min) 7.00125-002 © European Aviation Safety Agency.Foreign Part 145 approvals. Trainee’ signature 11.e. Name. All rights reserved. Confirm revision status through the EASA-Internet/Intranet. ID 2. ISO9001 Certified. ATA 3. Reference 6. has been assessed on the following tasks and successfully passed the practical assessment demonstrating appropriate knowledge and skills: ID ATA Subject Reference A/C Reg Date Operation performed Trainee’s signature Practical Assessor’s signature This table is intended to be hand written. Name. EASA Approval number Enter aircraft type Enter the intended certifying staff category (i.On-the-Job Training as evidenced in the enclosed logbook (compliance report signed by the Organisation providing the training). Remarks: This remark field is intended to leave the practical assessor the possibility to enter additional comments regarding the trainee`s knowledge and skills./Mr.. Proprietary document. The number. Practical Assessor`s signature (conducting the final assessment) Page 15 of 15 .: 1. Copies are not controlled. 2. has completed the ……….. name SURNAME Trainee Name 5.Foreign Part 145 approvals.( aircraft type and category)……. Date TE. ………(Trainee`s name SURNAME)…………. All rights reserved. Confirm revision status through the EASA-Internet/Intranet.On-the-Job Training logbook European Aviation Safety Agency AMO Logo.. The completion of this field is optional ………………………………………. ISO9001 Certified.CAO. Final assessment of the OJT This is to certify that Mrs.e.00125-002 © European Aviation Safety Agency. type and content of task used for the assessment is solely under the discretion of the practical assessor. Place ……………………………………….. An agency of the European Union ……………………………………….. B1) Mr.