Eriez CP2080 Brochure Magnetic Separators

Suspended Permanent MagnetModel CP 20/80 SC-2 Automatically remove large amounts of ferrous contamination from non–ferrous materials conveyed on almost any type of conveyor or chute. riez, world authority in magnetic equipment and the pioneer of Permanent Magnets, brings you this new line of Suspended Permanent Magnets with operating advantages never before available. Suspended Magnetic Separators are designed for applications where ferrous contaminants are to be removed from bulk products, either on a moving conveyor belt or chute. The CP 20/80 utilizes a permanent magnet circuit to provide a continuous and uniform magnetic field across the feed belt to optimize separation efficiency of damaging tramp iron. The self cleaning feature supplied with the unit provides for automatic removal of accumulated tramp metal. SB-307B NEW…Only from Eriez. E FEATURES • Low operating cost • No electrical maintenance on magnet • No costly shutdowns • Uninterrupted magnetic protection • Simple installation • Powerful magnetic field ® • Permanent magnet requires no power O.TYPICAL OPERATION The magnet is placed across the conveyor belt.5 951 40.9 836 54 1370 COMBINED PINCH GUARD AND DEFLECTOR PANEL COMBINED PINCH GUARD AND DEFLECTOR PANEL Dimensions and specifications subject to change without notice.6 750 18 457 SUSPENSION 20.A.6 DIA. ERIE.5M-SG-SEN ERIEZ MANUFACTURING CO. INFORMATION REQUIRED • Material type • Material bulk density • Material condition • Material size • Type and minimum size of tramp iron • Maximum lump size • Conveyor belt/chute width • Conveyor belt speed • Conveyor belt/chute dimensions and incline • Angle of “troughing” idlers • Machinery to be protected • Head pulley diameter • Head pulley material DIMENSIONS 16. The CP 20/80 SC–2 is designed for a maximum suspension height of approximately 10 inches (250 mm) on belts less than 36 inches (1 m) wide.S.2 664 INCHES MILLIMETERS BELT WIDTH 32.9 521 20.5 520 78. ferrous metals fall away into bins for collection and disposal. Telephone 814/835-6000 • 800/345-4946 • Fax 814/838-4960 • International Fax 814/833-3348 ® Web Site: http://www.2 412 12. Ferrous material is attracted by the magnet and is held on the belt. MAGNET SELECTION The size of the appropriate suspended permanent magnetic separator depends upon each specific application.eriez. As the belt moves clear of the magnetic field.2 514 26. BOX 10608.6 320 20. Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co. P. Applications involving wider belts or higher suspension may require a larger suspended permanent magnet or an SE7000 electromagnet. Vibratory and Metal Detection Applications HEADQUARTERS: 2200 ASBURY ROAD.com e-mail: [email protected] 1990 1. Eriez engineers need the listed information in order to select the most efficient and economic magnet for any particular application. ©1999 ERIEZ MAGNETICS ALL RIGHTS RESERVED World Authority in Advanced Technology for Magnetic.5 800 TYPE SC2 9. PA 16514-0608 U.com MANUFACTURING FACILITIES IN: AUSTRALIA • BRAZIL • CANADA • JAPAN • MEXICO • SOUTH AFRICA • UNITED KINGDOM • UNITED STATES 799-2.2 234 37. A moving continuous belt surrounds the magnet box. PRINTED IN USA .5 1027 29. 40 31.