Electrical CSR 12-13

March 27, 2018 | Author: Santosh Mhatre | Category: Ac Power Plugs And Sockets, Electrical Connector, Electrical Wiring, Electrical Equipment, Industries
Share
Report this link


Comments



Description

Chapter : 1 WIRING (WG) Mains (MA) Item No Short Description Unit Material Labour Total 1.1 Concealing of Conduits (WG-MA/CC) 1-1-1 1-1-2 1-1-3 1-1-4 1-1-5 1-1-6 1-1-7 1-1-8 1-1-9 Note :- Chiselling wall/floor appropriately and with supplying & laying ISI mark Rigid Steel conduit 16 SWG 20 mm dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 20 mm. dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Chiselling wall/floor appropriately and with supplying & laying ISI mark Rigid Steel conduit 16 SWG 25 mm dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 25 mm. dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Chiselling wall/floor appropriately and with supplying & laying ISI mark Rigid Steel conduit 16 SWG 32 mm dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 32 mm. dia. with necessary accessories as per specification No: WG-MA/CC, para no. 1.2.3 Chiselling wall/floor appropriately and with supplying & laying I.S.I. Mark Rigid P.V.C. conduit 20 mm. dia. with necessary accessories as per specification No: WGMA/CC, para no. 1.2.1 Chiselling wall/floor appropriately and with supplying & laying I.S.I. Mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories as per specification No: WGMA/CC, para no. 1.2.1 Chiselling wall/floor appropriately and with supplying & laying I.S.I. mark Rigid P.V.C. conduit 32 mm. dia. with necessary accessories as per specification No: WGMA/CC, para no. 1.2.1 1) For concealed wiring stranded copper wires shall be invariably used. 2) Add Rs 3/- per meter for erecting conduit on stone wall Mtr. 105 35.89 141.00 Mtr. Mtr. 105 124 29.56 35.89 135.00 160.00 Mtr. Mtr. 124 169 31.67 44.34 156.00 213.00 Mtr. Mtr. 169 69 33.78 35.89 203.00 105.00 Mtr. 80 40.12 120.00 Mtr. 98 44.34 142.00 1.2 PVC Flexible/Rigid Conduits/Casing-n-capping (WG-MA/CON) 1-2-1 1-2-2 1-2-3 1-2-4 1-2-5 1-2-6 1-2-7 1-2-8 1-2-9 1-2-10 Supplying and laying P.V.C. corrugated flexible conduit 16 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 20 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 25 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 32 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 40 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying P.V.C. corrugated flexible conduit 50 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. Supplying and laying rigid PVC conduit 20 mm dia. with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying rigid PVC conduit 25 mm dia. with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying rigid PVC conduit 32 mm dia. with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.1 Supplying and laying PVC trunking (PVC casing-n-capping) of size 20 mm. with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2 Supplying and laying PVC trunking (PVC casing-n-capping) of size 25 mm. with accessories on wall/ceiling as per specification No: WG- MA/CON, para no. 1.1.2 Supplying and laying PVC trunking (PVC casing-n-capping) of size 32 mm. with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2 Supplying and laying PVC trunking (PVC casing-n-capping) of size 40 mm. with accessories on wall/ceiling as per specification No: WG- MA/CON, para no. 1.1.2 Supplying and laying PVC box trunking of size 50x16 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no.1.1.2 Supplying and laying PVC box trunking of size 50x50 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no. 1.1.2 Supplying and laying PVC box trunking of size 75x50 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no. 1.1.2 Mtr. 10 5.28 15.00 Mtr. 13 5.28 18.00 Mtr. 17 5.28 22.00 Mtr. 24 5.28 29.00 Mtr. 37 5.28 42.00 Mtr. 50 5.28 55.00 Mtr. Mtr. Mtr. Mtr. 48 64 88 20 8.45 8.45 8.45 13.72 56.00 72.00 96.00 34.00 1-2-11 Mtr. 24 13.72 38.00 1-2-12 Mtr. 31 13.72 45.00 1-2-13 Mtr. 49 13.72 63.00 1-2-14 1-2-15 1-2-16 Mtr. Mtr. Mtr. 67 128 290 13.72 13.72 13.72 81.00 142.00 304.00 1-2-17 1-2-18 Supplying and laying PVC box trunking of size 75x75 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX, para no.1.1.2 Supplying and laying PVC box trunking of size 100x50 mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 25x25 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 45x30 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 60x45 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 75x75 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Supplying and laying PVC slotted box trunking of size 100x100 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2 Add Rs 3/- per meter for erecting conduit on stone wall Mtr. Mtr. 358 459 13.72 13.72 372.00 473.00 1-2-19 Mtr. 56 13.72 70.00 1-2-20 Mtr. 91 13.72 105.00 1-2-21 Mtr. 137 13.72 151.00 1-2-22 Mtr. 221 13.72 235.00 1-2-23 Mtr. 486 13.72 500.00 Note :- 1.3 Bunch of Wires (WG-MA/BW) 1-3-1 1-3-2 1-3-3 1-3-4 1-3-5 1-3-6 1-3-7 1-3-8 1-3-9 1-3-10 1-3-11 1-3-12 1-3-13 1-3-14 1-3-15 1-3-16 1-3-17 1-3-18 Supplying & erecting mains with 2x1.5 sq.mm F.R solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x2.5 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x2.5 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x4 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x4 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x6 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x6 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/insid pole/Bus bars or any other places. as per specification No: WG-MA/BW Supplying & erecting mains with 2x10 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 2x10 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x2.5 Sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x2.5 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x4 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x4 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x6 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars orany other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x6 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x10 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 3x10 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Mtr. 26 6.33 32.00 Mtr. 28 6.33 34.00 Mtr. 39 10.56 50.00 Mtr. 44 10.56 55.00 Mtr. 60 10.56 71.00 Mtr. 65 10.56 76.00 Mtr. 91 10.56 102.00 Mtr. 101 10.56 112.00 Mtr. 160 14.78 175.00 Mtr. 181 14.78 196.00 Mtr. 61 13.72 75.00 Mtr. 65 13.72 79.00 Mtr. 91 13.72 105.00 Mtr. 100 13.72 114.00 Mtr. 138 17.95 156.00 Mtr. 151 17.95 169.00 Mtr. 242 22.17 264.00 Mtr. 272 22.17 294.00 1-3-19 1-3-20 1-3-21 1-3-22 1-3-23 1-3-24 1-3-25 (New) Note :- Supplying & erecting mains with 4x16 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x16 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x25 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x25 sq.mm F.R.L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x35 sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x35 sq.mm F.R L.S stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying & erecting mains with 4x50 sq.mm FR stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 1) Double the rate of two wire bunch for calculating rate of four wire bunch up to 10 sq mm 2) Continuous running earth wire should be provided of min. 1.5 sq. mm. up to phase wire of 2.5 sq. mm. And further earth wire of half of the size of phase wire is to be used only for light & power load .For Computer wiring size of earth wire shall be of same size as that of phase wire. 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire and earth wire should be with green colour PVC. 4) For all types of wiring stranded copper wires shall be invariably used. Mtr. 514 25.34 539.00 Mtr. 562 25.34 587.00 Mtr. 766 30.62 797.00 Mtr. 890 30.62 921.00 Mtr. 1100 30.62 1131.00 Mtr. 1137 30.62 1168.00 Mtr. 1410 30.62 1441.00 1.4 Mains on GI Bare Wire 1-4-1 1-4-2 1-4-3 1-4-4 1-4-5 1-4-6 1-4-7 Supplying and erecting mains with ISI mark 2 x 2.5 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 2 x 4 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 2 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 3 x 4 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 3 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 4 x 4 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with ISI mark 4 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Mtr. 25 9.5 35.00 Mtr. 31 9.5 41.00 Mtr. 39 9.5 49.00 Mtr. 40 13.72 54.00 Mtr. 52 13.72 66.00 Mtr. 489 15.84 505.00 Mtr. 63 25.34 88.00 1.5 Mains in Metal Conduit (WG-MA/MC) 1-5-1 1-5-2 1-5-3 1-5-4 Supplying & erecting mains with 2x1.5 sq.mm. F.R. copper wire, in 16gauge 20 mm dia. Rigid Steel conduit with continuous GI earth wire of1.5 sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x1.5 sq.mm. F.R.LS copper wire, in 16gauge 20 mm dia. Rigid Steel conduit with continuous GI earth wire of 1.5 sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x2.5 sq.mm. F.R. copper wire, in 16gauge 20 mm dia.Rigid Steel conduit, with continuous GI earth wire of 1.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Supplying & erecting mains with 2x2.5 sq.mm. F.R.L.S copper wire, in 16gauge 20 mm dia. Rigid Steel conduit, with continuous GI earth wire of 1.5sq.mm. as per specification No: WG-MA/MC, para no. 1.4.3 Mtr. 131 33.78 165.00 Mtr. 132 33.78 166.00 Mtr. 145 39.06 184.00 Mtr. 149 39.06 188.00 para no.and earth wire 1.20mm dia.3 Supplying & erecting mains with 3x6 sq. as per specification No: WG-MA/MC.3 Supplying & erecting mains with 4x10 sq. in 16gauge 25 mm dia.F.Rigid Steel conduit.S copper wire.4.5 sq. 195 41.00 Mtr. as per specification No: WG-MA/MC. para no.20mm dia.per meter for erecting conduit on stone wall Mtr.mm.R.mm.R L. 366 52.R.and earth wire 2. para no.3 Add Rs 3/.5sq.mm.copper wire. para no. Rigid Steel conduit.mm.06 236. with continuous GI earth wire of 4sq.mm.00 Mtr. copper wire. in 16gauge 25 mm dia.3 Supplying & erecting mains with 4x4 sq.5 sqmm FR PVC copper wire.1 Supplying & erecting mains with 2x2.4.R.3 Supplying & erecting mains with 4x6 sq.5sq.4.mm.3 Supplying & erecting mains with 6x6 sq.00 Mtr.5 sq.34 509.3 Supplying & erecting mains with 3x4 sq.3 Supplying & erecting mains with 2x6 sq. 166 39.95 588. 1.as per specification No: WG-MA/MC. 1.5sq.3 Supplying & erecting mains with 4x10 sq.copper wire.00 Mtr.00 1. 1. in rigid PVC conduit min.S copper wire.mm. para no.mm.mm.mm. 78 10.F. Rigid Steel conduit.R.3 Supplying & erecting mains with 2x4 sq.L.R. 92 17.L. Rigid Steel conduit. with continuous GI earth wire of 2. with continuous GI earth wire of 6sq. with continuous GI earth wire of 4sq. 1. 532 55.F.4. with continuous GI earth wire of 4sq.00 Mtr.5 sqmm F R PVC copper wire.00 Mtr.06 245. para no.mm.4.5sq. 1.L.and earth wire 1.5 sqmm FRLS PVC copper wire in rigid PVC conduitmin.06 205. in 16gauge 20 mm dia. with continuous GI earth wire of 2. para no.4.51 304.mm. with continuous GI earth wire of 2.L.mm. as per specification No: WG-MA/MC. 1. F. with continuous GI earth wire of 6sq. 1.and earth wire 2.mm. 195 41. as per specification No: WG-MA/PC.R. in 16gauge20 mm dia. 1. in 16gauge20 mm dia.F. in 16gauge 20 mm dia.mm.3 Supplying & erecting mains with 4x6 sq. in 16gauge 32 mm dia. para no.95 549. as per specification No: WG-MA/MC. 308 46. 1. Rigid Steel conduit.as per specification No: WG-MA/MC. para no.4.4. Rigid Steel conduit.mm.F. Rigid Steel conduit. as per specification No: WG-MA/MC. Rigid Steel conduit.5 sqmm FRLS PVC copper wire. copper wire. 267 41. 1. in 16gauge 20 mm dia.4. with continuous GI earth wire of 6sq.00 Mtr.R.00 Mtr.L. 1. with continuous GI earth wire of 6sq.S.17 236.5 sq.6 Mains in PVC Conduit (WG-MA/PC) 1-6-1 1-6-2 1-6-3 1-6-4 Supplying & erecting mains 2x1. with continuous GI earth wire of 2. in 16gauge 25 mm dia. Rigid Steel conduit. 493 55.mm.3 Supplying & erecting mains with 2x6 sq. 206 39. in16gauge 20 mm dia.L.mm as per specification No: WG-MA/MC.R. Rigid Steel conduit.4. in 16 gauge 2 mm dia.95 110. para no. 1. with continuous GI earth wire of 4sq. Rigid Steel conduit. 1.06 210.95 114. in 16gauge 25 mm dia. 171 39.1 Mtr. in 16gauge 32 mm dia.4. para no. 1.3 Supplying & erecting mains with 2x10 sq. 1. as per specification No: WG-MA/MC. Rigid Steel conduit.mm. F.mm. 395 52.mm. as per specification No: WG-MA/MC.mm.00 Mtr.mm.00 Mtr. as per specification No: WG-MA/PC. 96 17.4. in 16gauge 25 mm dia. para no. as per specification No: WG-MA/MC.mm.R.mm.4.4.00 Mtr.34 535.00 Mtr. para no. para no.20mm dia as per specification No: WG-MA/PC.3 Supplying & erecting mains with 3x4 sq. in 16gauge 20 mm dia.00 Mtr.mm.as per specification No: WG-MA/MC.5 sq. 197 39.3 Supplying & erecting mains with 3x10 sq. 256 46.mm.00 Mtr.79 448. with continuous GI earth wire of 2.3 Supplying & erecting mains with 2x10 sq.mm. 1.4. in rigid PVC conduit min. 79 10. as per specification No: WG-MA/MC. as per specification No: WG-MA/PC. para no. with continuous GI earth wire of 4sq. Rigid Steel conduit. with continuous GI earth wire of 4sq. as per specification No: WG-MA/MC.1 Supplying & erecting mains with 2x2.R copper wire. Rigid Steel conduit .mm.R. Rigid Steel conduit.4.mm. as per specification No: WG-MA/MC. F.4. 1.F.4.4. para no.3 Supplying & erecting mains with 4x4 sq.17 284. in 16gauge 20 mm dia.00 . 243 41.R copper wire. F. para no.F.mm. 326 46.mm.S copper wire. in 16 gauge 32 mm dia.00 Mtr.as per specification No: WG-MA/MC. 1.R copper wire.L. para no. 1. para no. in rigid PVC conduit min. Rigid Steel conduit . 1.5 sq. para no.mm.S copper wire.R copper wire. with continuous GI earth wire of 4sq.R.17 308. para no. with continuous GI earth wire of 6sq. as per specification No: WG-MA/MC.F.45 354. 1. as per specification No: WG-MA/MC.mm.00 Mtr.20mm dia.S copper wire.45 302. 243 47. Rigid Steel conduit.00 Mtr.L.mm.1-5-5 1-5-6 1-5-7 1-5-8 1-5-9 1-5-10 1-5-11 1-5-12 1-5-13 1-5-14 1-5-15 1-5-16 1-5-17 1-5-18 1-5-19 1-5-20 1-5-21 1-5-22 1-5-23 1-5-24 Note :- Supplying & erecting mains with 2x4 sq. para no.3 Supplying & erecting mains with 3x6 sq. in 16gauge20 mm dia.R copper wire. as per specification No: WG-MA/MC. 1.4.00 Mtr.F.L.S copper wire.4.mm.56 90.mm. 1. 472 63.45 292.S copper wire.4.as per specification No: WG-MA/MC.56 89.S copper wire.79 419. in 16gauge 25 mm dia. with continuous GI earth wire of 4sq. F.00 Mtr.mm. Rigid Steel conduit.R.R copper wire.00 Mtr. with continuous GI earth wire of 2.3 Supplying & erecting mains with 6x6 sq. para no.mm.17 236. Rigid Steel conduit.R copper wire.45 372. F.F.1 Supplying & erecting mains with 2x1. with continuous GI earth wire of 6sq. in 16gauge 20 mm dia. para no. F. 446 63.Rigid Steel conduit.mm.00 Mtr.mm.3 Supplying & erecting mains with 3x10 sq. 256 47.mm. F.S copper wire.4.51 291.mm.4.00 Mtr. 1. 246 46.F.5sq.mm.F. 1.20mm dia.4. para no. in rigid PVC conduit min.20mm dia. 1. 1.mm.and earth wire 6 sqmm FR PVC copper wire.95 131.1 Supplying & erecting mains with 4x4 sq.1 Supplying & erecting mains with 2x10 sq. in rigid PVC conduit 25mm dia. in rigid PVC conduit 25mm dia.62 369.4.5 mm thick Sunmica with S M screws and duly connected. 1. as per specification No: WG-MA/PC. as per specification No: WGMA/PC.1 Supplying & erecting mains with 4x6 sq. in rigid PVC conduit min. in rigid PVC conduit 32mm dia.33 32. Mtr. 1.as per specification No: WG-MA/PC.00 Mtr.4. 199 23. para no. as per specification No: WGMA/PC. in rigid PVC conduit 25mm dia.20mm dia. 1. in rigid PVC conduit min.25mm dia. 1. in rigid PVC conduit min. 1. 1.1 Supplying & erecting mains with 4x6 sq.17 173. Each 37 6.and earth wire 4 sqmm FRLS PVC copper wire.1 Supplying & erecting mains with 6x6 sq. 213 22. in rigid PVC conduit min. as per specification No: WGMA/PC.62 502.1 Supplying & erecting mains with 2x6 sq.mm.mm.20mm dia. para no.5 mm thick Sunmica with S M screws and duly connected. 113 17.mm. para no.00 Mtr.mm.00 Each 26 6.4. 1.1 1) Add Rs.4.62 463. as per specification No: WGMA/PC. 309 30.4. 203 30.00 Mtr. para no.and earth wire 2.00 Mtr.20mm dia.00 Mtr. 251 30. 269 30. as per specification No: WGMA/PC.mm.1 Supplying & erecting mains with 4x4 sq. 1.4.5 sqmm FR PVC copper wire in rigid PVC conduit min.17 235.4.01 424.00 Accessories 1.4. para no.20mm dia.00 Mtr.1 Supplying & erecting mains with 2x6 sq.00 Mtr.25mm dia. as per specification No: WG-MA/PC. in rigid PVC conduit min. 1.and earth wire 2.39 216. para no.mm.4.1 Supplying & erecting mains with 2x4 sq. 1.1 Supplying & erecting mains with 6x6 sq.23 222. Supplying and erecting One/Two way piano type ISI mark switch 6A.5 sq mm FRLS PVC copper wire in rigid PVC conduit min.5 sqmm FRLS PVC copper wire.00 Mtr.mm.mm./bell push erected on Filled polypropylene ISI marked (IS:14772-2000) board or double polished wooden board/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.17 164.20mm dia. as per specification No: WGMA/PC.62 340. in rigid PVC conduit min. in rigid PVC conduit min. para no.4.and earth wire 4 sqmm FR PVC copper wire.25mm dia.and earth wire 4 sqmm FR PVC copper wire.20mm dia. as per specification No: WGMA/PC.95 171.4. as per specification No: WG-MA/PC. in rigid PVC conduit min.as per specification No: WGMA/PC.62 282. 190 26.1-6-5 1-6-6 1-6-7 1-6-8 1-6-9 1-6-10 1-6-11 1-6-12 1-6-13 1-6-14 1-6-15 1-6-16 1-6-17 1-6-18 1-6-19 1-6-20 1-6-21 1-6-22 1-6-23 1-6-24 Note :- Supplying & erecting mains with 2x4 sq.4.00 Mtr.7 Wiring Accessories 1-7-1 1-7-2 Supplying and erecting shockproof 6A ISI mark porcelain base T.4.mm.00 Mtr.20mm dia. 386 38.and earth wire 6 sqmm FRLS PVC copper wire. 1.mm.per meter for erecting mains in PVC/HG conduit on stone wall.and earth wire 4 sqmm FR PVC copper wire. as per specification No: WGMA/PC.1 Supplying & erecting mains with 3x6 sq. 338 30. 233 22.Switch / bell push erected on Filled polypropylene ISI marked (IS:14772-2000 board or polished double wooden block / 3 mm thick hylam sheet / 4mm thick plywood pasted with 1.mm. 1. para no.4. 142 22. 432 30. as per specification No: WGMA/PC.00 Mtr.1 Supplying & erecting mains with 4x10 sq.and earth wire 2.1 Supplying & erecting mains with 3x6 sq.and earth wire 6 sqmm FR PVC copper wire. 3/. as per specification No: WGMA/PC.00 Mtr.95 136. para no.00 Mtr. 411 38. in rigid PVC conduit min.and earth wire 4 sqmm FRLS PVC copper wire. 1. as per specification No: WGMA/PC.1 Supplying & erecting mains with 3x4 sq. as per specification No: WGMA/PC. 1. in rigid PVC conduit 32mm dia. in rigid PVC conduit min. para no. 189 23.mm. 471 30.and earth wire 2. 151 22.mm.00 Mtr.33 43. para no.00 Mtr. 118 17.1 Supplying & erecting mains with 3x10 sq.5 sqmm FRLS PVC copper wire.95 162.mm.mm. para no.00 Mtr.4.and earth wire 4 sqmm FRLS PVC copper wire.mm.1 Supplying & erecting mains with 2x10 sq. para no. para no.00 .and earth wire 6 sqmm FR PVC copper wire. in rigid PVC conduit 32mm dia. in rigid PVC conduit 32mm dia.and earth wire 2.and earth wire 2. as per specification No: WG-MA/PC.20mm dia.1 Supplying & erecting mains with 3x10 sq. para no.4. 144 17. as per specification No: WG-MA/PC.62 234.00 Mtr. para no.1 Supplying & erecting mains with 4x10 sq. para no.23 212.1 Supplying & erecting mains with 3x4 sq.mm. 153 17. 1.62 300.and earth wire 6 sqmm FRLS PVC copper wire.5 sqmm FR PVC copper wire.and earth wire 4 sqmmFRLS PVC copper wire.00 Mtr.17 255.00 Mtr. 1.4. as per specification No: WG-MA/PC.and earth wire 4 sqmm FR PVC copper wire.01 449.5 sqmm FR PVC copper wire. para no. para no.4.4.mm.mm. 1.and earth wire 6 sqmm FRLS PVC copper wire. duly erected on provided plate and box with wiring connections complete.00 111.11 17.5 mm thick Sunmica with S M screws and duly connected.C. Supplying and erecting ISI mark shockproof 3 pin plug socket 16A with porcelain base/ flush type erected on Filled polypropylene ISI marked (IS:147722000) board or polished thick varnished double wooden block / folded or screwed board with top of either wooden/3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.00 1. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box.00 1-8-6 Each 149 9.45 64.00 1-7-11 Each 107 31.00 1-8-5 Each 101 9.00 1-7-10 Each 52 9. switch 16 A porcelain base surface mounting type / flush mounting type erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished thick varnished double wooden block/folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with1.5 9. erected on Filled polypropylene ISI marked (IS:14772.00 1-7-7 Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting Each holder / pendent holder bakelite base 6A.5 159. Each 52 8.67 15.00 .for erecting accessories on provided board/ junction box.67 139. Supplying and erecting ISI mark shockproof bell push on Filled polypropylene ISI marked (IS:14772-2000) board or wooden block covered with sunmica with 2 Core (TRS type) PVC insulated copper wire of size 0.A.67 36.5 mm thick sunmica with S M screws and duly connected.00 1-7-12 Each 96 9.00 Note :1-7-8 1-7-9 15 74 0 31.S sheet box duly painted and connected with earth terminal and leads Supplying and erecting ISI mark flush type shockproof plug socket 6 pin 6A and 16A with switch 16A combined unit erected on Filled polypropylene ISI marked (IS:14772-2000) board or double wooden block / 3mm thick hylam sheet / 4mm thickplywood pasted with 1.33 41.45 60. Supplying and erecting modular type Two way switch 6A / 10A (2 Module) ISI mark.00 35 6.00 1-7-13 Each 128 13. supply.Reduce rates by Rs.5/-for erecting accessories on provided board / junction box. Each 87 9. Each 56 8. Supplying adaptor for lamp holder 230 V.1-7-3 Supplying and erecting ISI mark shockproof T.5 111.00 106. Supplying and erecting modular type bell-push 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.5/. Supplying and erecting ISI mark recess type 3 pin plug socket 6A with piano switch 6A erected on M.5 52. approved make duly erected on provided plate and box with wiring connections complete.5 106. ISI mark.00 1-7-16 Each 4 31.S box made of 16 guage sheet and covered with sunmica and with connecting leads Concealing the provided MS / PVC switch box in wall with finishing in an approved manner Each Each 15 2. Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.5 sq mm 5 m length connected to the point.5 mm thick Sunmica with S M screws and duly connected. Supplying and erecting ISI marked recess type 3 pin plug socket 6A with piano switch 6A combined unit erected on M.5 97.S Box made of 16 SWG sheet duly painted and covered with bakelite hylam sheet of 3 mm thickness connected with earth terminals and leads duly concealed Supplying and erecting ISI marked recess type 3 pin plug socket 6A with piano switch 6 A combined unit erected on polished double wooden block/ folded or screwed board with top of either wooden or plywood pasted with sunmica and with connecting leads Supplying and erecting ISI mark flush shock proof plug socket 6 pin 6A and 16 A with switch 16A combined unit erected in recess in 16 guage M.& 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board. Reduce rate by Rs.00 Each Each 116 101 9.00 1-7-15 Each 68 15.00 1-8-4 Each 113 9. Supplying and erecting ISI mark shockproof 3 pin plug socket 6A with Each porcelain base / flush type erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.45 70.5 126. Supplying and erecting flush type shockproof plug socket 6A. Supplying and erecting modular type bell-push with indicator 2 modules 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.2000) board or polished double wooden/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1. approved make.5 mm thick Sunmica with S M screws and duly connected.00 1-7-6 62 8.00 1-7-14 Each 42 9.84 84.5 123.8 Modular switches and Accessories 1-8-1 1-8-2 1-8-3 Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.00 1-7-4 1-7-5 Supplying and erecting ISI mark shockproof piano type porcelain base switch 250 V Each 16 A. Supplying and erecting modular type switch 16 / 20 A with indicator.5 62.5 mm thick Sunmica with S M screws and duly connected.72 142. 00 148.5 114. Supplying and erecting PVC Surface modular switch box with inner plate (mounting) & front plate for 8 module complete duly connected. Each 375 9. Supplying and erecting modular type electronic step regulator two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.5 102.00 Each 207 9.00 1-8-20 Each 268 9. Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.00 35.00 Each 208 9.00 1-8-16 Each 111 9. ISI mark.5 9. DP energy saving switch withBrass KEY TAG ISI mark approved make duly erected on provided plate and box with wiring connections complete.78 33. Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected in an approved manner. Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected in an approved manner. Supplying and erecting modular type cover for junction box ISI mark approved make duly erected on provided box.00 Each 399 9.5 100.5 356. Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.00 1-8-14 Each 92 9. Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected in an approved manner.5 278.5 174.00 1-8-13 Each 100 9. switch 32A with indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete.00 19. Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected in an approved manner.56 33.00 Each 346 9.5 385.5 73. Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.5 611.00 124.5 121.00 222.78 33. Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected in an approved manner. Supplying and erecting modular type telephone socket two gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected in an approved manner. Each 164 9.1-8-7 1-8-8 1-8-9 1-8-10 1-8-11 1-8-12 Supplying and erecting modular type switch one way 16 / 20 A.5 0 0 29. Supplying and erecting modular type blanking plate two module ISI mark approved make duly erected on provided plate & box.00 1-8-21 1-8-22 1-8-23 1-8-24 1-8-25 1-8-26 1-8-27 1-8-28 1-8-29 1-8-30 1-8-31 1-8-32 1-8-33 1-8-34 Supplying and erecting modular type electronic dimmer 600W two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.78 33. Supplying and erecting modular type electronic dimmer 400 / 450W one module ISI mark approved make duly erected on provided plate and box with wiring connections complete.78 33.00 366.00 Each Each Each Each Each Each Each Each Each Each Each 31 19 35 94 94 114 129 188 242 309 332 9. Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected in an approved manner.5 156.5 189.5 409.00 1-8-18 1-8-19 Each Each 179 114 9. Supplying and erecting modular type D. Supplying and erecting modular type T.78 33.00 124.00 Each 104 9.00 124. Supplying and erecting modular type 32A. approved make duly erected on provided plate and box with wiring connections complete with neon indicator.00 1-8-15 Each 90 9.56 29.P. Supplying and erecting modular type buzzer 220 / 250V ISI mark approved make duly erected on provided plate and box with wiring connections complete. Supplying and erecting modular type electronic dimmer 1000W two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.00 163.00 Each 63 9. Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box.78 41. Supplying and erecting modular type 6 / 16A fuse unit ISI mark approved make duly erected on provided plate and box with wiring connections complete. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete.5 110.00 Each 601 9. Supplying and erecting modular type bell indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete.00 1-8-17 Each 146 9.5 217.00 276.V. Supplying and erecting modular type indicator lamp ISI mark approved make duly erected on provided plate and box with wiring connections complete.5 218.00 . Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.00 343. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.00 Each 128 85.51 214.00 Point 501 193.9 Point Wiring (WG-PW) 1-9-1 1-9-2 1-9-3 1-9-4 1-9-5 Point wiring for light/fan/bell in 20 mm metal conduit with 1.for 8 module plate 6) Rs 102/.51 571.5 134.for 3 module plate 3) Rs 43/.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point 492 172.00 Point 334 91.00 Each 605 85.46 402.19 699.19 694.00 Each 485 85.00 Each 261 141. Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.51 190.for 16/18 module plate Each 96 85.00 Point Wiring (PW) 1.08 669.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1. deduct following amount from overall rates of respective above items 1) Rs 31/.for 12 module plate 7) Rs 143/. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.for 6 module plate 5) Rs 86/.46 475. Supplying and erecting White Footlight with 4 modules concealed modular box and lamp holder with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and morter / POP as per required and duly connected in an approved manner.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm metal conduit with 1.00 Each 261 141.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring in for light/fan/bell in 20 mm metal conduit with 1.08 664.46 402. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.00 Each 334 141.00 Each 124 9.00 Each 104 85.00 .for 1& 2 module plate 2) Rs 38/. Supplying and erecting White Footlight with 8 modules concealed modular box and lamp holder with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and morter / POP as per required and duly connected in an approved manner. Supplying and erecting 6 to 32 A SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.51 691.28 499.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm metal conduit with 1. For supplying and erecting modular switches without box.51 190. Supplying and erecting 16 to 32 A DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.for 4 module plate 4) Rs 75/.1-8-35 1-8-36 1-8-37 1-8-38 1-8-39 1-8-40 1-8-41 1-8-42 1-8-43 1-8-44 1-8-45 1-8-46 (New) 1-8-47 (New) Note :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiseling and finishing with cement morter / POP as per required to match the background in an approved manner.00 Point 497 172.00 Each 456 43.5 295.00 Point 506 193.00 Each 212 85.00 Each 104 85.51 298.00 Each 285 9.51 182. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.85 426. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. 3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of light point wiring.79 634.I.11 9. earthing and with modular accessories as per specification No: WG.bell. ordinary switches & accessories are to used.67 29.B.02 462.0 sqm FR grade copper wire with flush type switchand required accessaries as per specification No: WG-PW/SW Point wiring in PVC trunking (casing-capping) with 1.10 Telephone Wiring (WG-TW/TW) 1-10-1 Supplying & erecting telephone cable 1 pair with 0.95 76. switches and with ceiling rose erected on PVC block. 228 /.mm FRLS grade copper wires with moduler type switch and socket and required accessaries as per specification No WGPW/SW Supplying and drawing of 2x1.0 sqm FR grade copper wire with flush type switchand required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in PVC trunking (casing-capping) with 1.0 sqmm FR grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm rigid PVC conduit with 1.mm.00 1-9-15 Point 39 30.00 Point 543 90.00 1-9-18 Point 306 118. from overall rates.S. Point wiring in PVC trunking (casing-capping) with 1.1-9-6 1-9-7 1-9-8 1-9-9 1-9-10 1-9-11 1-9-12 1-9-13 1-9-14 Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.00 1-9-19 Point 312 118.from overall rate of pointwiring for IP/Plug on board if point wiring to be provided without modular box (i. 136 /.28 45. Point 13 13 12 31.from overall rate of point wiring for Light/fan/bell/exhaust fan point and Rs 38/.per point for light .79 428.56 5.PW/CW Refilling the holes for dismantled point wiring with cement mortar & finishing in an approved manner.5 sq.02 456.85 431. add 10 % of overall rate of point wiring for every additional 1 meter length or part thereof. FR .00 per point wiring.0 sqm FRLS grade copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in PVC trunking (casing-capping) with 1.98 1007.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for light/fan/bell consealed type in min 20 mm PVC conduit with 1.00 Point 439 233. Rs.5 sq. 1) For point wiring above 6 meters of length of. (Refer Item No.18 291. concealed type in min 20 mm PVC conduit with 1.31 672.Fire Retardant FRLS . 8) Deduct Rs 31/. 7 2.00 371. 228 /. 2)Point wiring starts from Main board/Intermediate switch board and suitable circuit mains are to be provided from D.18 296.for independent plug point or plug on board.Fire Retardant Low Smoke. WG-TW Mtr./ PVC switch box in wall with finishing in an approved manner as per specification No: WG-PW/CW Concealing of provided ISI mark G.24 430.for Independent plug point wiring and Rs. pipe/H.G.exhaust fan & Fan point. laid in provided PVC casing / conduit as per specification No.00 Point 348 114. screwed conduit/PVC pipe in wall/floor/false ceiling complete as per specification No:WG.e point wiring to be provided on modular furniture or such parallel installations where modular box is not required) 9) For Concealed type wiring only FR Grade wire shall be used. 4) For wiring on stone wall add Rs 15.mm. 7) For Concealed point wiring.mm.PW/CW Conversion of light point into fan point in PVC conduit / PVC truncking with suitable Filled polypropylene ISI marked (IS:14772-2000) board or double wooden board for regulator.00 Point 342 114.00 .00 Point 742 264.00 Note :- 1.for point wiring & Rs. FR grade copper wires with moduler type switch and required accessaries as per specification No: WG-PW/CW Supplying and Drawing of 2x1.62 70.0 sqmm FRLS grade Copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW Point wiring for independent plug in 20 mm rigid PVC conduit with 1.00 Point 337 90.0 sqm FRLS grade copper wire with flush type switchand required accessaries as per specification No: WG-PW/SW Concealing provided M.00 1-9-17 Point 198 98. FRLS grade copper wires in provided concealed pipes for concealed type light/fan/bell point wiringand terminating on modular accessories in box for point wiring for light/fan/bell as per specification No: WG-PW/CW Point wiring for independent plug.5 mm dia.00 1-9-20 1-9-21 1-9-22 Each Mtr.5 sq. 6-1-9) 6) Whenever point wiring with modular switches are required add Rs. FRLS grade copper wires in provided concealed pipes and terminating on moduler accessories in box for point wiring for independent plug as per specification No WG-PW/SW Wiring for plug on board with Switch socket with copper wiring and earthing as per specification No:WG-PW/SW Wiring for plug on board with Switch socket concealed type with copper wiring. than deductRs.72 55.24 424.00 Point Point 62 315 13.00 1-9-16 Point 193 98.5 sq. 136 /. to first board and between boards.00 43. Point 339 91. 228/.00 17. 5) For covering at wall entries acrylic sheet of appropriate size shall be provided. instead of Modular switches & accessories.for plug on board. WG-TW Supplying. WG-TW Supplying & erecting telephone cable 10 pair with 0.52 142. Mtr. WG-TW Supplying & erecting telephone cable 3 pair with 0.00 225. Mtr.00 1. WG-TW Supplying. WG-TW Supplying & erecting Jelly filled armoured telephone cable 10 pair with0.5 mm dia.00 20863.39 7.28 5.00 13578. WG-TW Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Job Job 1516 1589 2423 3330 4986 5893 7108 10400 12918 15098 23107 520 557 748 784 922 959 1437 1754 207 206 86 17599 19418 142. WG-TW Supplying.25 1659.67 1445.00 238. WG-TW Supplying & erecting Over Voltage protection Magazine suitable for 10 pair as per specification No.39 7. erecting & commissioning MDF Box 300 x 300 pairs as per specification No. WG-TW Supplying.5 mm dia as per specification No. WG-TW Supplying.00 1732. laid in provided trench asper specification No.5 mm dia.17 41. laid in provided trench as per specification No. WG-TW Supplying.5 mm dia.17 41. Mtr. erecting & commissioning Junction box suitable for 60 pairs as per specification No. WG-TW Supplying & erecting Jelly filled armoured telephone cable 100 pair with 0. laid in provided PVC casing / conduit asper specification No.00 2566.00 90. installing. laid in provided PVC casing / conduit asper specification No.75 203.00 244. WG-TW Supplying & erecting telephone cable 20 pair with 0.00 124.39 7. testing & commissioning analogue type PBX (Private Branch Exchange ) of 3 x 8 extension as per specification No. erecting & commissioning Junction box suitable for 50 pairs as per specification No. WG-TW Supplying. Mtr.5 mm dia.00 22.00 101.17 41.11 2.39 7. erecting & commissioning MDF Box 500 x 500 pairs as per specification No. erecting & commissioning Krone module of 10 pairs as per specification No. testing & commissioning analogue type PBX 4 x 12 extension as per specification No. 12 17 23 28 50 94 231 444 83 117 218 391 15 54 5. WG-TW Supplying.25 1445.00 1020. WG-TW Supplying & erecting telephone cable 4 pair with 0. laid in provided PVC casing / conduit asper specification No. WG-TW Supplying & erecting telephone cable 50 pair with 0. Mtr. WG-TW Supplying. erecting & commissioning MDF Box 200 x 200 pairs as per specification No. erecting & commissioning MDF Box 250 x 250 pairs as per specification No.69 38.81 659.39 7. Mtr.00 6223.00 963. laid in provided trench as per specification No. Mtr.52 142. WG-TW Supplying.17 61. WG-TW Supplying.00 451.5 mm dia.43 456.01 12.00 55. WG-TW Mtr.28 5. erecting & commissioning Junction box suitable for 40 pairs as per specification No.00 3534.5 mm dia. Mtr.17 41. erecting & commissioning MDF Box 400 x 400 pairs as per specification No.00 1544.76 41. erecting & commissioning Junction box suitable for 20 pairs as per specification No. Mtr. installing.00 398. WG-TW Supplying & erecting Jumper wire with 0.06 659. WG-TW Supplying.00 789. erecting & commissioning Junction box suitable for 10 pairs as per specification No. WG-TW Supplying.52 203.5 mm dia. Mtr.00 15758.00 23766. Mtr.63 106. laid in provided PVC casing / conduit as per specification No.00 5190.5 mm dia.28 7.5 mm dia.00 825. WG-TW Supplying.00 .63 164. WG-TW Supplying & erecting Jelly filled armoured telephone cable 20 pair with 0.11 17.00 56. erecting & commissioning MDF Box 150 x 150 pairs as per specification No.00 99. WG-TW Supplying & erecting telephone cable 100 pair with 0.00 1861.00 19044. WG-TW Supplying & erecting telephone cable 5 pair with 0.5 mm dia.00 561.00 598.00 17.00 10856. WG-TW Supplying. Mtr. WG-TW Supplying.39 2. WG-TW Supplying. laid in provided PVC casing / conduit as per specification No. erecting & commissioning MDF Box 100 x 100 pairs as per specification No. erecting & commissioning Junction box suitable for 100 pairs as per specification No.5 mm dia.75 330.00 7438. WG-TW Supplying. WG-TW Supplying. Mtr. WG-TW Supplying. WG-TW Supplying & installing Co-axial cable low voltage grade RG-11 as per specification No.00 28.43 330.00 372. erecting & commissioning Junction box suitable for 150 pairs as per specification No. erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No.81 658.28 5. laid in provided PVC casing / conduit as per specification No. WG-TW Supplying & erecting Jelly filled armoured telephone cable 50 pair with 0. erecting & commissioning MDF Box 800 x 800 pairs as per specification No. erecting & commissioning Junction box suitable for 30 pairs as per specification No.00 33.11 Telephone Accessories (WG-TW/TA) 1-11-1 1-11-2 1-11-3 1-11-4 1-11-5 1-11-6 1-11-7 1-11-8 1-11-9 1-11-10 1-11-11 1-11-12 1-11-13 1-11-14 1-11-15 1-11-16 1-11-17 1-11-18 1-11-19 1-11-20 1-11-21 1-11-22 1-11-23 1-11-24 Supplying. laid in provided trench as per specification No.1-10-2 1-10-3 1-10-4 1-10-5 1-10-6 1-10-7 1-10-8 1-10-9 1-10-10 1-10-11 1-10-12 1-10-13 1-10-14 1-10-15 Supplying & erecting telephone cable 2 pair with 0.39 7.28 5. erecting & commissioning MDF Box 60 x 60 pairs as per specification No. laid in provided PVC casing / conduit asper specification No. laid in provided PVC casing / conduit as per specification No. WG-TW Supplying.23 106.5 mm dia. erecting & commissioning MDF Box 600 x 600 pairs as per specification No. WG-TW Supplying & erecting Rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification No. 03 49990. PVC armoured multimode Optical Fibre Cable with 6 fibres.84 34. WG-COC/OFC Supplying and plugging FRLS duplex 1 meter length. WG-TW Supplying. 4-GB Ports and 2 SFP slots with WebView . 162 34. WG-TW Supplying.14 Networking Accessories (WG-COC/NAS) 1-14-1 1-14-2 Supplying. 27 29 221 309 113 7. installing. testing & commissioning Digital type EPABX 8 x 24 extension as per specification No. PVC armoured multimode Optical Fibre Cable with 12 fibres.39 34.45 7010. WG-TW Supplying.72 34. installing.03 4265. testing & commissioning Digital type EPABX 8 x 40 extension as per specification No. 168 34. WG-NWC/ODA Supplying and fixing Aesthetic Omni Directional Antenna suitable for Wireless LAN with all accessories as per specification No. suitable for 1 GBps ethernet distance at 850 nm of wavelength. installing. installing.84 2858. UTP Patch cord of Cat 6 type in position as per specification No. 461 34.39 7. WG-COC/NC Supplying and fixing 1 meter length. suitable for 1 GBps ethernet distance at 850 nm of wavelength. WG-COC/OFC Supplying and erecting FR grade. Mtr.25 1445. on wall/ceiling or laid in provided pipe/trench asper specification No. installing.00 1-13-4 1-13-5 1-13-6 Each Each Each 6528 6586 7280 482.00 1-13-3 Each 1512 482.00 323. installing. and configuring Broadband ADSL Router with all accessories. suitable for 1 GBps ethernet distance at 850 nm of wavelength. WG-TW Supplying. on wall/ceiling or laid in provided pipe/trench as per specification No.72 13.55 2777. fixing. on wall/ceiling or laid in provided pipe/trench as per specification No. WG-NWC/GBS Supplying.00 7762.55 4265. testing & commissioning analogue type PBX 4 x 32 extension as per specification No. PVC armoured multimode Optical Fibre Cable with 12 fibres.00 1-12-7 Mtr. suitable for 1 GBps ethernet distance at 850 nm of wavelength. suitable for 1 GBps ethernet distance at 850 nm of wavelength. WG.00 1-12-8 Mtr.00 102713. WG-COC/PC Supplying and fixing 3 meter length. WG-NAS/UTPC.00 528.00 116523. 106 34.84 197. and configuring Web Smart Power over Ethernet Switch of 24 Ports .13 Networking Components (WG. testing & commissioning analogue type PBX 8 x 24 extension as per specification No. WG-TW Supplying.84 496.00 1-12-6 Mtr.00 1-13-2 Each 37106 2066 39172. testing & commissioning Digital type EPABX (Electronic Private Automatic Branch Exchange) of 8 x 16 extension as per specification no.00 1-12-1 1-12-2 1-12-3 1-12-4 1-12-5 Mtr.03 4265. installing & testing UTP Connector (RJ-45) as per specification No. testing & commissioning Digital type EPABX 8 x 32 extension as per specification No. WG-COC/PC Supplying and erecting FR grade. WG-COC/OFC Supplying and erecting FR grade.NWC/AODA Job Job Job Job Job Job 48545 58253 50970 60075 70997 46603 1445.45 482.00 81936. WG-TW Supplying.45 482.00 235. WG-COC/OFC Supplying and erecting FR grade. WG-COC/OFC Supplying and erecting FR grade.1-11-25 1-11-26 1-11-27 1-11-28 1-11-29 1-11-30 1-11-31 1-11-32 1-11-33 1-11-34 Supplying.12 Computer Cabling (WG-COC) Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. with core dia 50 µm. testing & commissioning analogue type PBX 8 x 32 extension as per specification No. testing & commissioning analogue type PBX 8 x 40 extension as per specification No. installing.39 13.00 1-12-10 Each 2823 34.00 1-12-9 Mtr.45 1994. on wall/ceiling or laid in provided pipe/trench as per specification No.COC/NWC) Supplying. with core dia 50 µm. WGNWC/ADSL Supplying and fixing Indoor LAN Dipole Antenna suitable for Wireless LAN with all accessories as per specification No.00 Job Job Job Job 62137 77671 98448 112258 4265. on provided rack or as directed as per specification no. Supplying and fixing Tool-less Information Outlet (Ethernet) flush/surface type in position as per specification no. installing.00 59698.38 41365.00 62853.00 1-13-1 Each 38610 2755. with core dia 62. on provided rack or as directed as per specification No. Fibre Patch cord into the LC/FC/SC/ST termination of LIU & fibre module/ fibre switch port complete as per specification No. fixing. installing. WG-NWC/ENS Supplying. with core dia 62. testing & commissioning Digital type EPABX 8 x 48 extension as per specification No. on wall/ceiling or laid in provided pipe/trench as per specification No.00 7068. on provided rack or as directed as per specification No.00 148. WG-NAS/IO Each Each 14 493 7.00 50868. PVC armoured multimode Optical Fibre Cable with 6 fibres.84 141.00 1. Each Each Mtr. WG-TW Supplying. fixing. PVC armoured multimode Optical Fibre Cable with 24 fibres.25 2777.00 36.5 µm. testing & commissioning analogue type PBX 4 x 24 extension as per specification No.03 66402. WG-COC/NC Supplying & installing UTP networking Cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. with core dia 50 µm.03 4265.00 53748.00 73775.84 21. WG-TW Supplying. installing. and configuring GB Managed Ethernet Switch of 24 Ports with 2 SFP Combo slots and WebView. WG-COC/FPC 1.55 2777.84 203. WG-TW 1. WG-NWC/DPA Supplying and fixing Omni Directional Antenna suitable for Wireless LAN with all accessories as per specification No. WG TW Supplying. UTP Patch cord of Cat 6 type in position as per specification No.5 µm.00 . independent plug point.00 17.25 1279. as per specification no. 70W [SON type] Supplying & erecting H.lamp 3 pin B. WG-NAS/LIU1 Supplying and fixing No Epoxy No Polish. Each Each Each 490 7928 3472 34. 250 W. wiring with mains of all types alongwith accessories etc.C / screwed cap head type 230 V. 15 W.00 383. Supplying & erecting GLS lamp 230 V.06 1..28 4.00 1040. WG-NAS/MMA Supplying and fixing ST "D" type Multimode connector for LIU to terminate OFC in LIU.84 15. 150W [SON type] Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each 15 14 15 16 16 16 207 18 50 51 134 97 131 178 24 180 185 367 485 267 382 579 1.00 15980. Supplying & erecting Mercury blended lamp 230 V.38 28813.00 136.00 Note :- Chapter 2 : FITTINGS (FG) 2. fan.00 30222. WG-NAS/KJ Supplying and fixing 24 port Patch Panel with tool-less keystone jacks in provided U Rack complete as per specification no. Light guide Interconnect Unit for termination of Optical fibre cables on wall/ provided U Rack complete as per specification no.84 15./ screwed cap head type 230 V.00 595.11 1.00 Each 224 68.00 8616. Supplying & erecting GLS lamp 230 V.C.08 525. clock.1 Lamps ( FG-LP) 2-1-1 2-1-2 2-1-3 2-1-4 2-1-5 2-1-6 2-1-7 2-1-8 2-1-9 2-1-10 2-1-11 2-1-12 2-1-13 2-1-14 2-1-15 2-1-16 2-1-17 2-1-18 2-1-19 2-1-20 2-1-21 2-1-22 Supplying & erecting GLS lamp 230 V.45 2066 2293. Supplying & erecting GLS lamp 230 V.100 W. WG.06 2.11 2.00 15.00 51. Supplying & erecting MV lamp 3 pin BC / Screwed cap head / pin type 230 V.84 15.00 180.11 2.P.00 99.1-14-3 1-14-4 1-14-5 1-14-6 1-14-7 Supplying and fixing Tool-less Keystone Jack (RJ-45) in provided Patch Panel complete as per specification no.S. Supplying & erecting MV lamp 3 pin BC / Screwed cap head / pin type 230 V. WGNAS/RAK Supplying and fixing Wireless PCI LAN (108 Mbps) card in provided computer as per specification No. 60 W.00 201.62 293.00 Each 6944 826. Supplying & erecting Electronic night lamp 0.00 1-14-15 Each 53794 6357.32 551. Supplying & erecting T8 36W fluorescent tube tri-Phospher/Tru.43 60151. WG-NAS/PEA Supplying and fixing 36 U Rack for Networking with necessary arrangement for fixing required 16A/6A Switches & Plugs for LAN network as per specification No. Supplying & erecting milky / coated / frosted lamp 250 V 40W / 60W Supplying & erecting fluorescent tube day light 600 mm.00 501.61 7771.06 1.V. 125 W.00 16.11 2. Supplying & erecting pigmy /candle lamp miniature type coloured / white.00 4023.11 2.00 1-15-1 Point -1 5.06 1.00 17. -1 5.00 283.00 1-14-10 1-14-11 Each Each 2727 29120 175. Supplying & erecting GLS lamp 230 V.band phospher with 3250 lumen output. Supplying & erecting MV lamp 3 pin BC / Screwed cap head / pin type 230 V.25 1102. WG-NAS/LAP3 1.84 16. 40 W.00 1-15-2 Mtr. Supplying and erecting T-5 24W Energy efficient fluoroscent tube.00 17. ST "D" type Multimode connector for LIU to terminate OFC in LIU as per specification No.00 19. Supplying & erecting H.15 2902.00 .84 688. WG-NAS/ LIU Supplying and fixing Wall/Rack type 24 Ports.84 15. 80 W.28 4. 36W Supplying & erecting T5 28W Energy efficient fluorescent tube. bell. Supplying & erecting GLS lamp 230 V. WGNAS/LAP2 Supplying and fixing Dual Band High Performance Manageable Wireless LAN Access Point with PoE (Power over Ethernet) in WLAN network as per specification as No. 400 W. lamp 3 pin B.06 1. Supplying and erecting T-5 14W Energy efficient fluoroscent tube.00 1-14-8 1-14-9 Each Each 865 865 413. 10 W.06 1. WGNAS/LIU2 Supplying and fixing Power over Ethernet Adaptor to provide DC supply to Ehternet devices as per specification No.00 1-14-14 Each 26058 2755.00 133. 18W Supplying & erecting fluorescent tube day light 1200 mm. 25 W.00 1-14-12 1-14-13 Each Each 1811 13914 482.06 1. WG-NAS/LANC2 Supplying and fixing Manageable Wireless LAN Access Point with PoE (Power over Ethernet) in WLAN network as per specification no.06 1.Complete as per specification No: WGPW/DM Dismantling the existing Telephone / Lan / Wan / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-PW/DM Dismantled material of Point wiring shall be retained by contractor.83 175. WG-NAS/ LIU Supplying and fixing ST "D" type Multimode Adaptor to couple two connectors between OFC & Fibre switch/Fibre module as per specification no.00 196. Supplying & erecting M V lamp 3 pin BC / Screwed cap head / pin type 230 V. Light guide Interconnect Unit for termination of Optical fibre cables on wall/ provided U Rack complete as per specification no. WG-NAS/PP Supplying and fixing Wall/Rack type 12 Ports.NAS/LAP1 Supplying and fixing High Performance Manageable Wireless LAN Access Point with PoE (Power over Ethernet) in WLAN network as per specification no.P.00 53.00 208. 160 W.06 1.84 15.V.00 398.5 W LED high glow.15 Dismantling Dismantling the existing light.84 15.06 15.00 25.S. 00 Note :- 2.lamps 2 W.] Supplying & erecting H.11 2.P.150W [SON-T type.84 15.00 Each Each 43 81 8. 230V.9 Supplying and erecting compact fluorescent lamp 22 to 26 W.S. 1000 W Supplying & erecting compact fluo. 150 W.00 16. 230 V integral type complete with ceramic adopter and having p.5 / 7/ 9 W complete with lamp and 3 core round plastic flexible cord with 6A 3 pin hand shield type plug top.for tubes and Rs.70W.11 2.intergral type complete with ceramic adopter and having p. Supplying & erecting Metal Halide lamp.f more than 0.C.V.10/for MV/SV/MH lamps.f more than 0.9 Supplying and erecting compact fluo.00 131.11 2.lamps 18 to 20 W. to be used with provided ballast Supplying & erecting compact fluo.(upto 1m) Supplying and erecting plain pendent type brass lamp holder complete erected at position with 20 cms glass opal shade with necessary length of twin twisted flexible wire 24 / 0. Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each 643 778 396 602 667 801 0 661 719 1071 1130 103 115 131 151 98 214 105 139 144 156 203 232 343 706 260 677 15.C. 230V.lamp 36 W.lamp 3 pin B.V .9 Supplying and erecting LED lamps 2/3 W.84 15. T-5.00 680.17 3.84 15.S.00 1146.S. intergral type complete with ceramic adopter and having p. 5) Lamps & tubes shall be used invariably of three star and above ratings as per BEE circular.V.P. are mandatory and as such conventional chokes shall not be used.20 mm.00 794. double ended. 400 W double ended.00 167.9 Supplying and erecting compact fluo.00 114.11 2.00 677.00 817.45 8.P.84 15.S.11 2./ SON / SON-T Lamp Supplying & erecting Metal Halide lamp.f more than 0. 6) Above rates are for lamps to be provided in new fittings and if lamps are to be provided/replaced in existing fittings add in labour rate Rs 5/.84 15.00 147.P.9 Supplying and erecting compact fluo. tubes fixed with flexible joints complete with 9/10 W.00 158.84 15.84 15.double ended.guarded glass and 10 mtrs of 3 core PVC flexible cord with hand shield type 3 pin 6 Amp plug top.lamp 5 / 7 / 9 / 11 W.lamp threaded type 230V. Supplying & erecting Metal Halide lamp. 400W [SON type] Supplying and erecting H. 230 V.11 3. 230V.00 1087.84 15.84 15./screwed cap head type 230V.00 89. intergral type complete with ceramic adopter and having p.45 51.84 15.230V.11 2. 230V intergral type complete with ceramic adopter and having p.84 15. Supplying and erecting compact fluo.energy efficient lamps (CFL. Supplying & erecting Halogen lamp 230 V.lamps 27 to 36 W. 230 V to be used with provided ballast.f more than 0.00 618.lamp 10 / 13 W.00 146. 230 V to be used with provided ballast.00 Each 139 0 139. Supplying approved make fluorescent tube type table lamp with anodized reflector and square M.lamps 45 / 65 W.high density polyester copper wound choke with starter. 400W [SON-T type] Erection of departmently supplied H.00 . lamp 3 pin B.84 15.S. tube with flexible joints complete suitable for lamp 1XPL.2-1-23 2-1-24 2-1-25 2-1-26 2-1-27 2-1-28 2-1-29 2-1-30 2-1-31 2-1-32 2-1-33 2-1-34 2-1-35 2-1-36 2-1-37 2-1-38 2-1-39 2-1-40 2-1-41 2-1-42 2-1-43 2-1-44 2-1-45 2-1-46 2-1-47 2-1-48 (New) 2-1-49 (New) Supplying & erecting H. 250W [SON type] Supplying & erecting H.f more than 0.f more than 0.00 234. 250W [SON-T type] Supplying and erecting H.00 141. 230V. 250 W double ended.00 230.9 Supplying and erecting compact fluo.00 Each 292 0 292. lamp threaded type 230V. 230V. intergral type complete with ceramic adopter and having p.lamp 3 pin B. 230V.f more than 0.intergral type complete with ceramic adopter and having p.P.230V.P. 230V integral type complete with ceramic adopter and having p. 230V. fluorescent tube.9 1) On Govt installation . 230V intergral type complete with ceramic adopter p.00 683.f more than 0.84 15. intergral type complete with ceramic adopter and having p. Supplying and erecting plain pendent type bakelite lamp holder complete erected at position with necessary length of twin flexible wire.(upto1m) Each 995 0 995.00 263.00 412. Supplying shock proof type hand lamp with lamp holder. 2) Use of GLS lamps shall be avoided and also to be intimated to other departments.00 735.S./ H.P.00 205. 230V to be used with provided ballast Supplying & erecting compact fluo. 70W [SON-T type] Supplying & erecting H. T-8 (tri-band phosphor)) shall be preferably used.V.84 15.00 107.lamp threaded type 230V.00 345.84 15. 3 pin plug top complete.2 Indoor Fittings (FG-IDF) 2-2-1 2-2-2 2-2-3 2-2-4 2-2-5 Supplying table lamp with M.00 119.9 Supplying and erecting compact fluo. type 230V./ screwed cap head type 230 V. installation use of Electronic chokes/energy saver accessories.17 659.f more than 0.11 2.V.V.f more than 0.9 Supplying and erecting LED lamps 5 W.lamps 9 / 11 W.84 15.P.S.84 2.00 708.9 Supplying and erecting compact fluoresent lamp 5W / 8 W. 3) For use of Single ended Metal Halide Lamp increase overall rate by 40 % in the rate for Double ended lamp.lamp18 W.V. (2-1-30 to 2-1-33) 4) On Govt.V. Supplying & erecting Metal Halide lamp.S.lamps 14 / 15 W. 500 W Supplying & erecting Halogen lamp 230 V. base condenser and 2m long 3 core round PVC flexible cord with hand shield type 6 A.M.C.S. 230V. Supplying & erecting compact fluo. 00 654. with electronic ballast complete fixed on wall.00 Each 724 22. As per specification no.17 451.56 1783.FGIDF/MOF Supplying and erecting approved make recess / surface mirror optic fitting suitable for 2 x 36W compact fluo.FGIDF/BHF Supplying and erecting luminaries suitable for 9/13/18 W CFL lamp.00 257. if required Supplying and erecting circular type recessed / surface down lighter with reflector and glass cover suitable for CFL 1 x 9 to 18 watts with circular stainless steel ring including Electronic Ballast having pf > 0.00 Each 984 22.FG-IDF/ML1 Supplying and erecting 1 light wall bracket Aluminum body & arm anodised / powder coated with decorative glass shade fixed on wall.00 216. with glass opal shade complete erected on polished double wooden block with necessary PVC wire leads. H.17 22. Lamp.51 1445.00 182.00 .00 Each 323 22.00 89. FG -IDF/DL1 Supplying and erecting square type recessed / surface down lighter with reflector and glass cover suitable for CFL 1 x 9 to 18W with square type stainless steel border including electronic ballast and holder duly fixed in false ceiling as per specification no.17 641. FG-IDF/DL1 Supplying and erecting square/ circular type recessed / surface down lighter with glass cover suitable for CFL 2x18W including gear box.95 17.FGIDF/MOF Supplying and erecting approved make recessed / surface down lighter with mirror optics of 100 mm suitable for 2 x 9 to 18 W compact flou. fixed in false ceiling as per specification no.17 1006. 1 light inside semi circular metallic reflector with counterweight with guide pulley / spring buffer with work shop type copper flexible wire complete with necessary hook. FG -IDF/DL1 Supplying and erecting square type recessed / surface down lighter with reflector and glass cover suitable for CFL 2 x 9 to 18W with square type stainless steel border including Electronic Ballast having pf > 0. Supplying and erecting 2 light wall bracket Aluminum body & arm anodised / powder coated complete with lamp holder and decorative glass shade suitably erected on polished wooden board / plywood pasted with laminate. Supplying and erecting one light wall bracket MS body & arm Chromium plated/ powder coated complete fixed on wall.95 22.00 Each 420 22.95 144. fixed in false ceiling as per specification no. Supplying and erecting Mirror light fitting with 1 x 9 W CFL.00 Each Each Each 433 239 194 17. screwed conduit of 16 SWG duly painted with ball suspension plate.98 and holder duly fixed in false ceiling as per specification no.98 and holder duly fixed in false ceiling as per specification no. FG-IDF/ML2 Supplying & erecting approved type suspension type decorative pendent fitting single light with anodized aluminium / powder coated MS rod up to 1 m length and canopy on top provided with decorative glass shed duly wired with two core flat wire suitable lamp holder complete.FG-IDF/DL1 Supplying and erecting approved make recessed / surface down lighter with mirror optics of 100 mm suitable for 1 x 9 to 18 W compact flou.FG-IDF/BHF Supplying and erecting bulkhead fitting suitable for non integral CFL .lamp fixed in false ceiling/ on ceiling as per specification no.89 401. 151 13.17 1122. FG-IDF/MOF Mtr. lamp fixed in false ceiling as per specification no. Supplying & erecting approved type suspension type decorative fitting with rise /fall arrangement.00 Each 436 16.00 Each Each Each Each Each 122 235 74 164 636 22.72 165. Supplying and erecting spot light / reading light suitable for CFL 5/9/11W complete metal body powder coated / painted with angular movement erected on wooden block and connected.17 22.00 Each 1051 22. As per specification no.00 261.00 Each 1753 29.fixed on wall above mirror as per specification no. Supplying and erecting 2 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board.00 Each 1552 22. Supplying and erecting glass shade of suitable size and shape of approved colour and quality on existing decorative fitting Supplying and erecting bulkhead fitting suitable for integral CFL fixed on wall.98 and holder duly fixed in false ceiling as per specification no.00 Each 999 22.G. FG-IDF/DL1 Supplying and erecting circular type recessed / surface down lighter with reflector and glass cover suitable for CFL 2 x 9 to 18 watts with circular stainless steel ring including Electronic Ballast having pf > 0.17 1574. Supplying and erecting one light Wall bracket fitting with dome complete fixed on the wall.17 14.78 17. Supplying and erecting 1 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board.2-2-6 2-2-7 2-2-8 2-2-9 2-2-10 2-2-11 2-2-12 2-2-13 2-2-14 2-2-15 2-2-16 2-2-17 2-2-18 2-2-19 2-2-20 2-2-21 2-2-22 2-2-23 2-2-24 2-2-25 2-2-26 2-2-27 2-2-28 Supplying and erecting Rod Pendent light with 20 mm dia.00 Each 384 16.00 Each 1397 47.89 453.17 746.00 Each 658 22. with necessary Choke & accessories complete erected on polished wooden / sunmica block as per specification no.00 Each 619 22.17 680.17 442.17 1021.17 1073.17 345.00 Each 1100 22. white stove enamelled / powder coated box type fluo. fixed at ceiling or on wall as per specification No. fitting with one 40W Electronic Ballast having pf > 0. Supplying and erecting approved make white stove enamelled / powder coated CRCA sheet not less than 0. and date of erection.FG-IDF/BFF Supplying & erecting approved make 1 x T8 40/36 watt white stove enamelled / powder coated box type fluo.2-2-29 2-2-30 2-2-31 2-2-32 2-2-33 2-2-34 2-2-35 2-2-36 2-2-37 2-2-38 Supplying and erecting approved make recess / surface soft light mirror optic square / rectangular fitting suitable for 2 x 36W compact fluo.56 1889.98 & THD <10 . Each 3219 29. & and marking Sr.white stove enamelled / powder coated box type fluo.lamp with Electronic Ballast having pf > 0.95 1208.2mm.00 2-2-41 Each 1596 17.98 & THD <10 fixed in false ceiling / on ceiling as per specification no. 2mm.lamp with PL Wings with Electronic Ballast having pf > 0.fitting with 2x 40W Electronic Ballast having pf > 0. fixed at ceiling or on wall as per specification No. IDF/MOF Supplying and erecting approved make square parabolic recess / surface mirror optic square / rectangular PL fitting suitable for 3 x 36 watt compact fluo.and marking Sr. fixed at ceiling or on wall as per specification No.98 & THD <10 fixed in false ceiling / on ceiling as per specification no.VPIT copper ballasts.00 2-2-42 Each 1133 17.00 Each 588 17.98 & THD <10 and lamp holders duly wired ready to use for 230 Volts.7 mm thick chalk board type fluo.98 & THD <10 .00 Each 2580 29.00 Each 695 17.00 2-2-39 Supplyng & erecting 1x 36W T-8 Energy Efficient Fluorescent tube light fitting EETLF slim type with clear acrylic cover and endcaps Minolta type with Electronic Ballast having pf > 0.95 778. IDF/MOF Supplying and erecting approved make recess / surface soft light square / rectangular PL fitting suitable for 2 x 36W compact fluo.98 & THD <10 .56 3249. FG-IDF/FL Supplying & erecting approved make 1 x T8 40/36W white stove enamelled / powder coated box type fluo.fitting of 1 xT8 40/36 W.7 mm thick chalk board type fluo. No.with 40 Watts Electronic Ballast having pf > 0.56 2610.95 1498.lamp with Electronic Ballast having pf > 0.fitting with 2 x 40 W. fixed at ceiling or on wall as per specification no. FGIDF/BFF Supplying and erecting approved make 2 x T8 40/36W. fixed at ceiling or on wall as per specification no. No. 50 Hz.95 1614.98 & THD <10 fixed in false ceiling / on ceiling as per specification no.fitting of 1 xT8 40/36W with 40 Watts VPIT ballast.95 1093.lamp with Electronic Ballast having pf > 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no.00 2-2-44 Each 1190 17. FG-IDF/MOF Supplying and erecting approved make Crescent recess / surface soft light mirror optic square PL fitting suitable for 3 x 36W compact fluo. FG-IDF/BFF Supplying & erecting approved make 1 x T8 40/36W with white stove enamelled/ powder coated industrial type flou.00 Each 1075 17. Single phase AC Supply to IS: 10322 as per quality requirements and erected on varnished wooden blocks with flexible wire twin core 24/0. FG-IDF/MOF Supplying and erecting 1 x 9 to 18W PL with electronic ballast concealed type foot light having CRCA powder coated body and alluminium step type or mirror finish reflector covered with clear acrylic stainless steel mat finish frame ( 9x6 inch in size) as per specification no.FG-IDF/BFF Supplying & erecting 1x28W T-5 Energy Efficient Retrofit/ Stand alone Fluorescent Tube light Fitting (EETLF) box type complete with Electronic Ballast having pf > 0. Electronic ballast pf > 0.FG-IDF/BFF Supplying & erecting approved make 1 x T8 40/36W white stove enamelled / powder coated box type fluo.FG-IDF/CBF Supplying and erecting approved make white stove enamelled / powder coated CRCA sheet not less than 0.98 & THD <10 fixed in false ceiling / on ceiling as per specification no.00 Each 3242 29.56 3330.00 Each 2362 29.95 1347. FG-IDF/MOF Supplying and erecting approved make square double parabolic recess / surface mirror optic square / rectangular PL fitting suitable for 2 x 36W compact fluo. FGIDF/CBF Supplying and erecting approved make 2 x T8 40/36W.56 3272. fixed at ceiling or on wall. Single phase AC Supply to IS: 10322 as per quality requirements and erected on varnished wooden blocks with flexible wire twin core 24/0.fitting with 40 Watts. FG-IDF/INF Each 1998 17. and date of erection. 50 Hz. As per specification no.00 2-2-43 Each 1329 17.lamp with Electronic Ballast having pf > 0.98 & THD <10 .00 2-2-40 Each 1480 17.98 & THD <10 and lamp holders duly wired ready to use for 230 Volts. fitting with 40 W Vaccum impregnated LOW WATT LOSS BALLAST fixed at ceiling or on wall as per specification no.00 Each 1859 29.95 713.00 Each 760 17.95 1151.56 2392.95 606.fitting with 40 Watts. fixed at ceiling or on wall as per specification No. polyester heavy duty copper wound ballast.95 2016.00 .00 Each 3300 29. FG-ODF/GSL Supplying and erecting 400W water tight M. FG-ODF/FLS2 Supplying and erecting 80 / 125W water tight M.02 2098.98 & THD <10 on provided bracket as per specification no. S.98.00 3308.00 Each 1968 516.73 2252. FG-ODF/CSL Supplying and erecting Energy efficient street light fitting Suitable for 2 x 14W T-5 lamp with PF > 0.00 2-3-9 2-3-10 2-3-11 2-3-12 2-3-13 2-3-14 2-3-15 Each Each Each Each Each Each Each 1988 2924 3479 2113 3041 3333 2807 109. FG-ODF/GSL Supplying & erecting Flood light Luminaries suitable for 70W metal halide lamp on provided bracket as per specification no. lamp fitting on provided bracket as per specification no.98 & THD <10 The fitting canopy is made of deep drown Alluminium body provided with serrated acrylic diffuser and gasket as per specification no. 5) The fitting having two or more CFL/ FTL should be provided with independent choke for each tube/ bulb Each 1590 17.09 267.56 1258.73 5320. no.3 Out door Fittings (FG-ODF) 2-3-1 2-3-2 2-3-3 2-3-4 2-3-5 2-3-6 2-3-7 2-3-8 Supplying and erecting CFL Street light Suitable for one No. FG-IDF/MOF 1) Reduce Rs 10/. FG-ODF/GSL Supplying & erecting street light 250W H.00 Each 2432 51.00 2. 3) All fittings are excluding tubes/lamps.98 & THD <10 .00 Each 984 51. lamp fitting on provided bracket as per specification no.8 185. fixed in false ceiling or at ceiling or on wall as per specification No. No.95 1608. fitting and 2’20 W.00 Each Each 17 21 22.00 Each 1538 29.00 3110.73 3845. lamp fitting on provided bracket as per specification no.98 & THD <10 on provided bracket as per specification no.24 2484.73 840. 9 to 18W CFL lamp with electronic ballast having pf > 0.00 Each 2233 29.00 Each 17 17.P.98 & THD <10 . lamp fitting on provided bracket as per specification no. FG-IDF/INF Supplying and erecting approved make 1 xT8 40/36W fluo fitting recess /surface mounting mirror optic type with one 40W Electronic Ballast having pf > 0. FG-ODF/GFL Each 788 51. & date of erection.00 51.79 185. FG-ODF/FLS2 Supplying and erecting Energy efficient T 5 Street light Suitable for 2 x 24W T 5 lamp with PF > 0.98 & THD <10 .09 311.00 3644.17 29. FG-IDF/MOP Supplying and erecting approved make 2 xT8 40/36 Watt fluo fitting recess /surface mounting mirror optic type with two 40 W Electronic Ballast having pf > 0. Supplying and erecting approved make square / rectangular recess / surface mirror optic PL fitting with para louvers suitable for 1 x 36W compact fluo. & date of erection.lamp with electronic ballast pf > 0.00 2978. lamp fitting on provided bracket as per specification no. 36W CFL lamp with electronic ballast having pf > 0. fitting with two 40 W Electronic Ballast having pf > 0. lamp fitting on provided bracket as per specification no.43 171. FG-ODF/FLS2 Supplying and erecting Energy efficient T 5 Street light Suitable for 4 x 24W T 5 lamp with PF > 0.73 2484.V. 4) All 40W fitings are suitable for 40W / 36 W . V.S. 36W CFL lamp with two individuals electronic ballast having pf > 0. Fitting with conventional choke shall be avoided.73 1036. FG-ODF/GSL Supplying and erecting 250W water tight M.73 1164.if.V. Erection of Departmentally supplied surface/recess type decorative fitting with CFL on PVC block connected with necessary leads Erection of Departmentally supplied mirror optic type fitting on PVC block connected with necessary leads and with marking the Sr.98. V. FG-ODF/GSL Supplying & erecting street light 70W H. fixed in false ceiling or at ceiling or on wall as per specification No.& THD <10 The fitting canopy is made of deep drownAlluminium body provided with serrated acrylic diffuser and gasket as per specification no.conventional/slim T8 (High Phosphor 2450 lumens) & Energy Efficient 36 W T8(Tri-band Phosphor 3250 lumens).V. V. fitting is to be erected on provided wooden / Sunmica board for Item No 2-2-11 to 2-2-18 2) Use of fluo. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for one No.8 267. 9 to 18W CFL lamp with electronic ballast having pf > 0.& THD <10 The fitting canopy is made of deep drown Alluminium body provided with serrated acrylic diffuser and gasket as per specification no.00 .00 2380.98 & THD <10 on provided bracket as per specification no. fitting and with marking the sr.00 Each 2200 51.P.S.95 35.98 & THD <10 fixed in false ceiling / on ceiling as per specification no.00 Each 5268 51.56 39.00 Each 3793 51.98 & THD <10 provided bracket as per specification no. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for four Nos.56 1568.98 & THD <10 on provided bracket as per specification no.00 Each 1228 29.00 3665. FG-IDF/MOP Erection of Departmentally supplied fitting on PVC block connected with necessary leads for 4’40 Watts. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for two Nos.2-2-45 2-2-46 2-2-47 2-2-48 2-2-49 2-2-50 2-2-51 (New) Note :- Supplying & erecting approved make 2 x T8 40/36W with white stove enamelled/ powder coated industrial type flou.P. FG-ODF/GSL Supplying & erecting street light 150W H. FG-ODF/CSL Supplying and erecting CFL Street light Suitable for two Nos.56 2263.00 Each 1112 51. fixed at ceiling or on wall as per specification No. 36W CFL lamp with four individuals electronic ballast having pf > 0. FG-ODF/GSL Supplying & erecting street light metal halide lamp fitting 250W on provided bracket as per specification no.00 3769.46 4882. FG-ODF/GLT Supplying & erecting gate light fitting with 300 mm. The three nos of Juno fittings are to be provided with centre pole mounting pipe assembly and with 3 nos “ J “ piple bracket.V.4 1001. & date of erection by best quality enamel paint Erecting the Deptt. Erecting Deptt.57 3461.79 54.M.95 109.clear acrylic bowl / mushroom / round shape with bollard suitable for one 9 / 11W CFL lamp on provided pipe as per specification no.00 55. FG-ODF/GFL Supplying & erecting flood light metal halide lamp fitting 250W on provided bracket as per specification no.00 3541. FG-ODF/GSL Supplying & erecting street light metal halide lamp fitting 400W on provided bracket as per specification no.4 83.2-3-16 2-3-17 2-3-18 2-3-19 2-3-20 2-3-21 2-3-22 2-3-23 2-3-24 2-3-25 2-3-26 2-3-27 Supplying & erecting Flood light Luminaries suitable for 150W metal halide lamp on provided bracket as per specification no. FG-ODF/FLS2 Each Each 3275 3696 185. on provided bracket as per specification no.98 & THD <10 The fitting canopy is made of deep drown Alluminium body provided with serrated acrylic diffuser and gasket as per specification no.00 .9 56. supplied H.00 2-3-36 2-3-37 2-3-38 2-3-39 (New) Each Each Each Each 0 0 0 5310 55. Supplying & erecting gate/ garden light fitting with 300 mm dia.00 3833.decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring The three nos of Juno fittings are to be provided with centre pole mounting pipe assembly and with 3 nos “ J “ piple bracket.00 3381.decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring The three nos of Juno fittings are to be provided with centre pole mounting pipe assembly and with 3 nos “ J “ piple bracket. dia. FG-ODF/GFL Supplying & erecting high purity sheet aluminum flood light fitting suitable for 250/400W. No.00 1440. glass bowl suitable for one 9 / 11W CFL lamp on provided pipe as per specification no.P.46 948.00 3821.00 2-3-34 Each 1579 76. FG-ODF/GFL Supplying & erecting street light metal halide lamp fitting 70W on provided bracket as per specification no. FG-ODF/GLT Erecting the departmentally supplied W.00 2-3-28 Each 4362 520.decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring etc. Supplying & erecting integral post top lantern fixture similar to JUNO type for 3x70W HPSV lamp consisting of brown painted LM 6 alloy cylindrical spigot.02 171. FG-ODF/GFL Supplying & erecting flood light luminaire suitable for 1 x1000W Halogen lamp. FG-ODF/GSL Supplying & erecting flood light metal halide lamp fitting 2x250W on provided bracket as per specification no.01 1655. & date of erection by best quality enamel paint Supplying and erecting Energy efficient street light fitting Suitable for 4 x 14W T-5 lamp with PF > 0.02 207.46 24798.00 2-3-35 Each 723 76.97 520.00 432. on provided bracket as per specification no. FG-ODF/GLT Supplying & erecting gate light fitting with 200 mm dia.97 465.9 54.Opal acrylic bowl / mushroom / round shape without bollard suitable for one 9 / 11W CFL lamp on provided pipe as per specification no. supplied H. Supplying & erecting integral post top lantern fixture similar to JUNO type for 150W MH lamp consisting of brown painted LM 6 alloy cylindrical spigot. FG-ODF/GSL Supplying & erecting street light metal halide lamp fitting 150W on provided bracket as per specification no.00 6547.00 110. FG-ODF/GFL Supplying & erecting flood light luminaire suitable for 1 x 500 Watts Halogen lamp.00 2-3-30 Each 7531 520. dia.V.46 171.46 24798.46 8051.V/ H. No.00 Each 24278 520.00 2-3-29 Each 24278 520.56 207. Fitting of 70-150W marking/ painting Sr./M.H. glass bowl on provided pipe as per specification no.00 Each Each Each Each Each Each Each Each Each 889 1356 2222 3210 3561 3333 6081 3625 4362 59.00 5365.PS./ H.8 124. street light fitting and marking / painting the Sr.00 4882.00 2-3-32 2-3-33 Each Each 918 349 83. MV/SV lamp on provided bracket as per specification no.decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring etc.12 84.decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring.H fitting of 250 – 400W and marking/ painting Sr.PS. Supplying & erecting integral post top lantern fixture similar to JUNO type for 3x70 Watts MH lamp consisting of brown painted LM 6 alloy cylindrical spigot.V/ M. No.46 25336.00 2-3-31 Each 24816 520.00 2393.97 207.01 799.decorative acrylic bowl supported by spun aluminum top cover complete with accessories such as copper wound choke and condensor housed within the lantern with necessary wiring etc. Supplying & erecting integral post top lantern fixture similar to JUNO type for 3x150W MH lamp consisting of brown painted LM 6 alloy cylindrical spigot. FG-ODF/GFL Supplying & erecting integral post top lantern fixture similar to JUNO type for 70 Watts HPSV lamp consisting of brown painted LM 6 alloy cylindrical spigot.P. Supplying & erecting integral post top lantern fixture similar to JUNO type for 70W MH lamp consisting of brown painted LM 6 alloy cylindrical spigot.PM. and date of erection by best quality enamel paint. FGODF/GLT Supplying & erecting garden light fitting with 300 mm. 136 10.98 & THD <10 of approved make having operating range100 to 300V with surge supression not less than 9 kV and with RF filter conforming to IS 13021 (Part I) suitable for T 8. Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A. 1x40/1x36W Fluo.95 244. board having portable bell push working on 9 V.72 13. H.00 2-4-22 Each 453 8. D. supply with resetting arrangement complete erected on double wooden/ sunmica board.00 289. FG-FG/AS5 Supplying and erecting VPIT compound heavy duty copper wound ballast for 230V 250 W HV/ M. FGFG/AS1 Supplying and erecting low watt loss vacuum impregnated copper choke (VPIT) suitable for CFL / FTL from 24-40 W as per specification No.V.the clamp shall be made of 25 x 3 mm MS flat with cutting.00 242. Providing and erecting clamps for box type / industrial type fittings with provided suspension down rod of 20 mm dia. 2) All fittings are excluding tubes/lamps. and bell on 250 V A.17 22.00 11. HV/ M.for one lamp in each fitting.25 to 2.00 193. lamp 250 W.72 55.dia H.28 20.G.33 22. lamp 125 W. 230 V as per specification No: FG-FG/AS7 Supplying and erecting condensor for M.W. lamp as per specification No. 230 V as per specification No FG-FG/AS7 Supplying and erecting condensor for M. The item shall be provided only at the time of installation of fitting on trusses / pipe / angle / channel.Note :- 1) If (DPSD) energy saving device is used.C. Supplying and erecting Electronic Type cordless call bell erected on T. lamps 70 / 150/250/400W as per specification No: FG-FG/AS6 Supplying and erecting electronic ignitor suitable for Metal hallide Lamp 70 / 150 /250 /400 Watts (Integral/non-integral type luminaries) as per specification No: FG-FG/AS6 Supplying and erecting low watt loss vacuum impregnated copper choke (VPIT) suitable for CFL / FTL from 11-20 W as per specification No. Supplying and erecting Bakelite call bell with 6 cm / buzzer with double coil suitable for 230V complete erected on PVC block.G. tube fitting.00 28.4.72 193.if accessories to be erected on provided wooden / sunmica board for item no. supply erected on polished double wooden block/sunmica block of suitable size.95 47. FG-FG/AS5 Supplying and erecting VPIT heavy duty copper wound ballast for 230V 400 W HV/ M. Supplying and erecting electronic ballast pf > 0. lamp 400 W. 10/.00 Note :- . FGFG/AS11 Supplying and erecting double suspension heavy duty lacquered iron chain with hooks for erecting fluo.00 Each 162 17.95 20.4.95 17.P.00 Each 179 13.17 17.conduit duly threaded and painted with two coats of enamel paint for erection of fluo tube light fitting with necessary check nuts and 2 or 3 core copper flexible wire of 24/.00 263./ MH.45 461.00 267.00 Pair 52 10. Fitting.00 Each Each 17 269 5.conduit.S.95 180.00 Each Each Each 41 50 82 13.2 mm for connecting leads (for measurements half of the actual length both pipes used) Supplying and erecting ball suspension plate cast aluminum erected with spring on wooden block in position.C. Supplying and erecting gong with double coil suitable for 230V.bending./ MH lamp as per specification No.FG-FG/AS4 Supplying 18 / 20 /36 / 40 W tube starter 230 V as per specification No. complete erected on polished wooden block.17 22. as per specification No FG-FG/AS7 Supplying and erecting condensor for M. 230 V as per specification No: FG-FG/AS7 Supplying and erecting ignitor suitable for 230 V H.V.00 Each 226 17. supply.00 Mtr./ MH lamp as per specification No.06 22. heavy duty coil and indicator lamp working on 230V A.56 147.00 1169.06 0 5.V.2 mm for connecting leads.C.(for measurements half of the actual length used) Supplying and erecting double suspension pipe rod of 16 gauge 20mm.06 20.V. increase rate by Rs 800/.00 96.V.29 Each Each Each Each Each Each 41 220 245 330 175 245 6.56 63.4 Accessories (FG-AS) 2-4-1 2-4-2 2-4-3 2-4-4 2-4-5 2-4-6 2-4-7 2-4-8 2-4-9 2-4-10 2-4-11 2-4-12 2-4-13 2-4-14 2-4-15 2-4-16 2-4-17 Note :2-4-18 2-4-19 2-4-20 2-4-21 Supplying and erecting condensor 4 microfarad for fluo.00 1570.00 64. FGFG/AS1 Supplying and erecting VPIT heavy duty copper wound ballast 230 V for 80 -150 W.00 352. (Effective range upto 45 meter) Reduce Rs. 3) The fitting having two or more CFL/ FTL should be provided with independent choke for each tube/ bulb 4) All SV/MV/MH/CFL/T-5 street fittings shall be used with one piece enclosure with top opening 2.00 Each Each Each Each Mtr. Supplying and erecting luminous / modular type call bell indicator with plastic body.28 728.V.2.tube light fitting with necessary 2 or 3 core copper flexible wire 24/.72 13. 710 1149 1550 11 23 17.C.drilling erected properly with necessary nut bolt as per direction.V. 430 57. The fitting having two or more CFL/ FTL should be provided with independent choke for each tube/ bulb Supplying and erecting Electronic ballast having pf > 0. wire mesh size 25 mm x 25 mm and made up of 14 SWG G. dia ‘B’ class G. 'B' grade G.00 Each 364 64.00 2. flame proof motor suitable for 230/250 Volts single phase. 398 65.00 2-6-8 Each 2573 0 2573. totally enclosed. Each Each Each Each Each 1576 1602 1535 1697 2225 30.00 1634. The Jali cover shall be made from good quality G.BKT/ BPC Supplying and erecting street light bracket for double fitting made from 40 mm.I. complete with necessary materials. sweep oscillating type. totally enclosed. dia 1. FG-FN/CF Providing and erecting bracket fan 400 mm. pipe 1. FG. No.00 Each 492 64.00 Each 1163 115. and date of erection. overheat protection unit.79 1607. pipe 1.I. dia B class G. pipe along with pole cap of 125 mm dia.ODF/ SLB. 100 mm dia duly welded as per specification no FG.00 2316.1.00 Each 428 85. Supplying and erecting Street light bracket for erection of side entry fitting on pole with 25 mm. FG-FG/AS1 Supplying and erecting Electronic ballast pf > 0.98 & THD <10 or Transformer suitable for CFL / FTL from 30-40 W as per specification No. dia. FG.2 m in total length complete as per specification no. of flexible wire and hand shield type 3 pin plug top and marking Sr. plastic or metal blades chrome plated guard with regulator and moisture proof treatment to winding and with ‘E’ class insulation and marking Sr.C.06 361.I.00 Each 341 20.51 1087.00 .00 Each 697 85. Supplying Pedestal fan 400 mm.01 487. No. sweep oscillating type.00 1729.51 514.4 428.67 90.51 478.I.4 556. pipe of required length complete as per specification no.51 783.07 1278. Providing and erecting air circulator 600 mm.I.BKT/ BPC Supplying and erecting street light bracket made from 40 mm. and date of erection. dia 1. supply. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no FG. pipe. FG-BKT/WB Supplying and erecting street light Wall bracket made from 40 mm.0 m.5 Bracket for Outdoor Fittings (FG-BKT) 2-5-1 2-5-2 2-5-3 2-5-4 2-5-5 2-5-6 2-5-7 Supplying and erecting street light bracket made from 25 mm dia B class G.C.6 Fans (FG-FN) 2-6-1 2-6-2 2-6-3 2-6-4 2-6-5 2-6-6 Supplying and erecting Ceiling fan of 600 mm.BKT/ BPC Supplying and erecting street light bracket for erection of single fitting on tubular welded pole with 40 mm.00 Each 5417 98. flame proof motor suitable for 230/250 Volts single phase.BKT/ BPC Supplying and erecting street light bracket for erection of double fitting on tubular welded pole with 40 mm.00 2-6-7 Each 6967 193. wire with side / supporting MS strips of suitable size.00 2-5-10 Mtr.67 31.2 m in total length complete as per specification no.I.I. dia B class G.BKT/ BPC Supplying and erecting Street light bracket for erection of side entry fitting on pole with 40 mm.00 1567.0 m.00 Each 1001 85. long on each side B grade G. Providing and erecting air circulator 450 mm. pipe of required length complete as per specification no. 50 cycles A. Pipe 0. wallmounting 1440 RPM without speed regulator. pipe. pipe. No. sweep complete erected in position as per specifcation no.67 31.00 2-5-8 Each 1483 115.ODF/ SLB. dia B class G. Each 392 85.I.19 7160. wall mounting 1440 RPM without speed regulator. FG-FN/CF Supplying and erecting Ceiling fan of 1400 mm. FG-BKT/WB Supplying and erecting street light bracket for single fitting made from 40 mm.0 m. FG-FN/CF Supplying and erecting Ceiling fan of 1200 mm. long B grade G. FG-FG/AS1 Sqm. sweep complete erected in position as per specifcation no.0 m. No.62 31. overheat protection unit.07 1598. FG-FN/CF Supplying and erecting Ceiling fan of 900 mm.2-4-23 Note :2-4-24 (New) 2-4-25 (New) Supplying and fixing wiremesh(Jali) cover suitable for fitting / fan or for any purpose. pipe welded to pole cap of 125 mm dia.I. 230 volts 50 cycles 1350 R.6 m in length along with pole cap of 300 mm length and 80mm dia duly welded with provided leads as per specification No FG.98 & THD <10 or Transformer suitable for CFL / FTL from 11-28 W as per specification No. sweep complete erected in position as per specifcation no.I. 230 Volts 50 cycles oscillating type complete with guard and regulator 3 mtrs. 325 57.01 382.00 2-5-9 Mtr. and date of erection. 50 cycles A. in length along with pole cap of 300 mm length. sweep complete erecte in position as per specifcation no. 'B' grade G. and date of erection. 600 mm long duly welded as per specification no FG. with one metre of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation and marking Sr.6 m.06 234.I.0.M.00 2.18 5515. supply. C.BKT/ BPC Supplying and erecting street light Wall bracket made from 25 mm. dia.00 Each 214 20. with one metre of 3 core lead wire and withmoisture proof treatment to winding and with ‘E’ class insulation and marking Sr. 600 mm long as per specification no FG.45 463.I. in length along with pole cap of 300 mm length and 80mm dia duly with provided leads as per specification No FG. Oscillating type. dia ‘B’ class G.P. sweep A.1. 39 142.S.7 Accessories for Fans (FG-FAS) 2-7-1 2-7-2 2-7-3 2-7-4 2-7-5 Supplying and erecting condenser 2.00 43.C.00 2-6-21 Each 4013 78.C. bolt and nuts erected with necessary hook of 10 mm.C.12 4091. For ceiling fans the extra down rod shall be provided only if the roof / slab height is more than 4. round bar and painted. or equivalentsquare size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected inposition and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. Supplying and erecting fresh air cum Exhaust fan of light duty 250 V A.C. 50 cycles 900 RPM 375 mm complete erected in position as per specifcation no. No. 5 metre length and Hand Shield type 3 pin 5A. Supplying and erecting fan clamp of 30 x 5 mm. M. 135 7. No.C. wire etc and marking Sr. wire etc and marking Sr. and date of erection. FG.00 69.5 micro farad for ceiling fan Supplying & fixing Anchor type fastener Fan hook.28 1787. Supplying and erecting Exhaust fan heavy duty 230 V.and marking / painting the Sr. FGFN/EXF Supplying and erecting Exhaust fan heavy duty 440 V A. totally enclosed. flame proof motor with additional 3 core wire. 50 cycles 225 mm.23 20.C.00 Note :2-7-7 0 Each 11 3. 50 cycles 375 mm.S.C. and date of erection. No.67 3. bars upto 50 mm length each side and pierced through a 16 S. 50 cycles 400 mm.00 . duly erected in an approved manner and marking Sr. oscillating type complete with Each 2 mtrs. No. Supplying and erecting Fan hook of 10 mm. round bar bounded to the R. wiremesh.2-6-9 Supplying pedestal type air circulator 450 mm.00 2-6-20 Each 4690 78.C.46 3603. No. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator. 1400RPM with condensor complete erected in position with necessary materials.62 1454. 230 V. 900 RPM complete erected in position as per specifcation no.overhead protection unit. 1400 RPM complete erected in position as per specifcation no.C. sweep complete with necessary brackets for fixing cabin fans.C.I.G. FGFN/EXF Supplying and erecting Exhaust fan heavy duty 230 V A.00 2-6-10 Each 7366 0 7366.00 154. thick aluminium/M. No.00 125.S. flame proof motor with additional 3 core wire. Supplying and erecting fan hook box of 10 mm M. 50 cycles 225mm. A. FG -FN/EXF Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 440 V A. & date of erction.00 2. plug topcomplete with moisture proof treatment and ‘E’ class insulation andmarking Sr. round bar grouted in RCC slab with making the site as original. Each 5729 0 5729. Supplying and erecting cabin fan of A.FN/EXF Supplying and erecting Exhaust fan heavy duty 230 V A. FG.28 1454.34 1567.33 9. Supplying pedestal type air circulator 600 mm.C. and date of erection.pipe/M.FN/EXF Supplying and erecting Exhaust fan heavy duty 230 V A.00 2-6-14 1542 25. 230 V.0 m Erection of departmentally supplied ceiling fan with necessary materials.C. M. and date of erection. duly erected in an approved manner and marking Sr.00 2-6-17 Each 3519 84.12 3651.72 35.00 2-6-15 Each 1430 24.34 1684.00 2-6-18 Each 3573 78. Supplying and erecting Exhaust fan medium duty 230 V A. and date of erection. of 3 core flexible wire and Hand shield type 3 pin plug top and marking Sr. 5 metre length and Hand Shield type 3 pin 6A.00 2-6-11 2-6-12 2-6-13 Supplying Table fan of A.00 2-6-16 Each 1404 49. 50 cycles 1200 mm complete erected in position as per specifcatio no. and date of erection. 50 cycles 450 mm.00 Each Each 56 105 23.S.C. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator. 50 cycles 250 mm. Fanmotor with moisture proof treatment and ‘E’ class insulation and marking Sr.S.S. No.00 2-6-19 Each 4981 78.12 5059. 50 cycles 300mm.00 1763 24.06 79.00 1659 25. wire mesh. M. No. No. flat of required length and 10 mm. /300 Each mm. 50 cycles 375 mm.overhead protection unit.W. and date of erection. Supplying and erecting fresh air cum Exhaust fan of light duty 250 V A.12 4768. 50 cycles 450 mm.78 2308. 1400 RPM metallic body.00 2-6-22 (New) Each 2274 33.00 2-7-6 Mtr. Supplying and erecting ‘B’ grade G. Supplying and erecting cabin fan of A.C. M.5 13. and date of erection by best quality enamel paint. 1400 RPM metallic body. FG-FN/CF Each 1860 0 1860. 50 cycles 375 mm. plug top complete with moisture proof treatment and ‘E’ class insulation and marking Sr. plastic blades. 900 RPM complete erected in position as per specifcation no. totally enclosed.S. 230 V.17 31. plastic blades. with 2 Nos of 10 mm dia x 75 mm long with necessary materials for Ceiling Fan. 1400 RPM complete erected in position as per specifcation no. sweep complete Each with necessary brackets for fixing cabin fans. Bowl 100 mm dia.2 mm copper PVC wire. For all type of fans except ceilling fan the metal canopy shall be provided. pipe down rod duly painted for fan complete erected with PVC two core flexible cable 24/0. Each Each Each 29 59 140 6. V. Each 39 125.7.17 1053. suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC Supplying & erecting 20 guage G.I sheet metal CAWL sector shaped with 25 mm x 25mm x 3mm angle iron frame. suitable for exhaust fan of 450 mm as per specification no FG-FAS/MSC 1) Reduce overall rate by 20% for item no 2.5 9. bolts.V/MH. Dismantling the existing ceiling fan/exhaust fan/cabin fan/bracket fan complete with accessories. 2)Before erection .00 2.5 125. if separate angle iron is provided.00 Each 993 60.00 20.00 Each 1081 40.46 235.8. Supplying and erecting electronic type step regulator complete erected on provided switch board. bolts.T.00 Each 935 60. Providing recess in brick wall suitable for erection of exhaust fan up to 450mm sweep complete with grouting of nut. metal mesh to avoid birds entry with necessary material.12 1150.8.97 311. suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC Supplying & erecting 22 guage G.V. No.1 Water Heaters (WH) 3-1-1 3-1-2 Supplying and erecting storage type Horizontal / vertical water heater 15 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification No. bolts.down rod & checknuts shall be checked thorougly for its quality. metal mesh to avoid birds entry with necessary material.I sheet metal CAWL sector shaped with 25 mm x 25mm x 3mm angle iron frame.12 852.00 Each 1110 40.1 to 2.63 77.00 204. The rates for item no 2.00 Each 812 40.06 7.00 Chapter 3 : APPLIANCES (AP) 3.quater pin. resistance type regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. plastering and colour washing to match the colour of the wall for the wall thickness of 375 mm. AP-WH/STWH Each 9124 233. Dismantling the existing W. suitable for exhaust fan of 450 mm as per specification no FG-FAS/MSC Supplying & erecting 20 guage G. between site and section office.00 Each 8269 233. down rod.W.00 61. G. sweep complete with grouting of nut. frame etc. metal mesh to avoid birds entry with necessary material. lamp fitting from wall with brackets and making the site as original complete. Each Each Each Each 0 0 0 0 7. block.00 126.bolts.8 Dismantling 2-8-1 2-8-2 2-8-3 2-8-4 Note :- Dismantling of existing fluorescent fittings of any type & size.I sheet metal CAWL sector shaped with 25 mm x 25mm x 3mm angle iron frame.16 to 2.63 165.00 Each 94 141.00 200. metal mesh to avoid birds entry with necessary material.21.I sheet metal CAWL rectangular / round shaped with 25 mm x 25mm x 3mm angle iron frame./ M. Supplying & erecting 22 guage G.5 9. and making the site clear.00 Each 133 282. sweep.12 1121./ M. plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm Providing recess in brick wall suitable for erection of exhaust fan up to 450mm.31 9357.I. on wall / loft as per specification No. AP-WH/STWH Supplying and erecting storage / pressure type Horizontal / vertical water heater 25 Liters of mild steel body. plastering and colour washing to match the colour of the wall for the wall thickness of 150 mm Providing recess in brick wall suitable for erection of exhaust fan up to 450mm.2-7-8 2-7-9 2-7-10 2-7-11 2-7-12 2-7-13 2-7-14 2-7-15 2-7-16 2-7-17 2-7-18 2-7-19 2-7-20 2-7-21 2-7-22 Note:- Erection of departmentally supplied Exhaust fan with necessary materials. and date of erection by best quality enamel paint.7. Providing recess in brick wall suitable for erection of exhaust fan up to 450mm sweep complete with grouting of nut.4 are for dismantling and handing over to section office inclusive of transportation upto 25 km.73 870.00 20.00 .nuts.00 149. bolts. complete erected on provided T.00 Each Each Each Each Each 67 139 116 190 78 9.5 9. accessories such as hook. Supplying and erecting electronic type 300/450 W dimmer/speed controller complete erected on provided switch board.shackle. Supplying and erecting electronic type 600 W.I sheet metal CAWL rectangular / round shaped with 25 mm x 25mm x 3mm angle iron frame. fluorescent fitting/ S. and marking / painting the Sr.17 995.T.V/MH lamp fitting from pole with brackets complete.93 416. Supplying and erecting.I sheet metal CAWL rectangular / round shaped with 25 mm x 25mm x 3mm angle iron frame. Dismantling the existing W.23 20. dimmer/speed controller complete erected on provided switch board.31 8502. metal mesh to avoid birds entry with necessary material. suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC Supplying & erecting 20 guage G. metal mesh to avoid birds entry with necessary material. sweep complete with grouting of nut.39 20. plastering and colour washing to match the colour of the wall for the stone wall.fluoroscent fitting / S. U clamps.06 61. suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC Supplying & erecting 22 guage G.00 Each 122 188.00 Each 818 51. Supplying & erecting 15 mm brass non return valve for inlet pipe of storage water heater. A.89 29.04 13324. Erecting departmentally supplied water heater of 25 ltr capacity with wall fasteners. Supplying & erecting dead weight pressure releasing valve for storage water heater with necessary materials. and date of erection. AP-WH/STWH Supplying and erecting ISI mark midget type 3.00 Each 10951 266. AP-AC/WAC Supplying and erecting window model mounted type room Air conditioner 3 star 230/250 V 50 cycles single phase A.5 TR 5 star capacity 250V. Supplying and erecting ISI mark / M. supply having 2 Nos. A.2 Air Conditioners (AC) 3-2-1 3-2-2 3-2-3 3-2-4 3-2-5 3-2-6 3-2-7 3-2-8 3-2-9 Supplying and erecting window model mounted type room Air conditioner 2 star 230/250V 50 cycles single phase A. glass as per requirement and filling the gaps to maintain air tightness.5 TR capacity complete at position as per specification No.24 32166. supply having 1 No of air handling unit hiwall / floor mounting type complete at position as per specification no.00 Each 87 149.C.0 Ltr instant type water heater of ABS plastic body 3 kW compling IS3412 of 1994 heating element 230/250 Volts 50 Cycle A. dia). grill.00 Each 33463 3369. Supplying & erecting vacuum relief valve for storage water heater with necessary materials. of air handling units hi-wall mounting type complete at position as per specification no.47 279. APAC/SAC Supplying and erecting split type room Airconditioning unit 2 TR star capacity 250V. of air handling units hi-wall mounting type complete at position as per specification No. 50 cycles. AP-AC/WAC Supplying and erecting window model mounted type room AirConditioner 2 star 230/250 V 50 cycles single phase A.00 Each 11882 266. etc.00 Each 59808 6738.supply 2 TR capacity complete at position as per specification No.91 51859. NRV. 50 cycles. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 2 TR 3 star capacity 250V. thermostatic control and thermal cutoff with 3 core PVC flexible wire leads duly tested and marking Sr. inlet & outlet pipes.00 462.00 219.A.C.C.00 126.00 3-1-15 3-1-16 3-1-17 Each Each 342 189 35. supply having 2 Nos.65 31478.00 Each 3800 35. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 1 TR star capacity 250V.00 Each 10979 266.00 Each 30399 1767.00 Each Each Each Each Each 154 293 443 115 109 19 19 19 19 16. Erecting departmentally supplied water heater of 35/ 50 ltr capacity with wall fasteners. inlet & outlet pipes. Supplying and erecting Chromium plated heavy duty brass stop cock for inlet pipe of water heater (15 mm. AP-AC/WAC Providing modifications to the existing window for erection of window room air conditioner in position with use of teakwood.C.00 Each 31777 1767. A. aluminum channel.89 3836.thermostat suitable for water heater / midget of any make.85 44856. 50 cycles.00 Each 504 307. A.00 312. heating element 2 / 3 kW suitable for water heater/ midget of any make any capacity. AP-WH/STWH Supplying and erecting storage type Horizontal / vertical water heater 35 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification no.supply 1. A.C.00 .00 3. AP-AC/SAC Each 233334 1560. and marking Sr No.00 Each 47217 4641.00 Each 28357 3120.C.79 36833. AP-WH/STWH Supplying and erecting storage/ pressure type vertical / horizontal water heater 50 Liters capacity of mild steel body on wall / loft as per specification No. supply having 1 No of air handling unit hi-wall mounting type complete at position as per specification no. NRV.56 378. Supplying and erecting split type room Airconditioning unit 3 TR capacity 250V.C.C. supply with inlet and outlet.C. any capacity.supply 1 TR capacity complete at position as per specification No.24 33544. AP-WH/STWH Supplying and erecting storage/ pressure type vertical / horizontal water heater 35 Liters of mild steel body on wall / loft as per specification No. and date of erection. Supplying and erecting ISI mark / M.32 234894.3-1-3 3-1-4 3-1-5 3-1-6 3-1-7 3-1-8 3-1-9 3-1-10 3-1-11 3-1-12 3-1-13 3-1-14 Supplying and erecting storage type Horizontal / vertical water heater 25 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification no. etc. 50 cycles. No. and marking Sr No.53 66547.04 12148. supply having 1 No of air handling unit hi-wall / floor mounting type complete at position as per specification no.C. AP-WH/STWH Supplying and erecting storage type Horizontal / vertical water heater 50 Liters capacity with high impact resistance Engineering plastic body on wall / loft as per specification no. Each 10103 233.of A.of A.21 811.04 11245. and date of erection.A. 50 cycles.91 237.00 134.89 173.00 Each 40272 4583.C. AP AC/SAC Supplying and erecting split type room Airconditioning unit 1.00 Each 100 179.04 11217.00 Each 13058 266.31 10336. Providing fibber reinforced PVC flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water complete erected in an approved manner. 00 658.00 979. 50 cycles. para no.C. A.5 TR capacity 440V.3-2-10 3-2-11 3-2-12 3-2-13 3-2-14 3-2-15 Notes:3-2-16 3-2-17 3-2-18 3-2-19 Notes:3-2-20 3-2-21 3-2-22 Notes:- Providing and pesting superior quality Sun control film on glass to acieve better cooling effect having 1. ultra violet transmittance less than 2% and solar heat rejection 78% in approved manner.5 54674. 50 cycles.1. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 42 mm Complete. APWCR/WC 3-3-6 new Supplying and erecting.84 15. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 16 mm complete.84 15. 433 642 802 963 15. para no. AP-AC/SAC Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 12 mm complete. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 35 mm complete. suitable for operation on 230/250 V 50 cycles complete 3-3-2 with automatic temperature control conforming to IS specifications No. A.84 449. supply having 1 No of air handling unit (Mega spilt) Hi-wall mounting type complete at position as per specification No. 50 cycles. APWCR/WC Supplying.1. para no. increase overall rate by 50% Supplying and laying rigid PVC conduit 25 mm dia to drain water with PVC accessories on wall/ceiling as per specification No: WG-MA/CON.53 78077. same shall be preferbly implemented. Mtr.3 Water coolers & Refrigerators (WC) Supplying refrigerator domestic type approved make 165 to 185 liters storage capacity.00 818. testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 60 liters per 3-3-4 hour and storage capacity 120 liters as per specification no.00 .00 3. rates for nitrile rubber insulation woth necessary material on refrigent piping. testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters 3-3-5 per hour and storage capacity 150 liters as per specification No.00 Mtr. No. and date of erection.00 Mtr.00 Each 64907 388. AP-WCR/solar WC Each 11483 0 11483. A.00 Mtr.5 65296.1 Supplying and laying rigid PVC conduit 50 mm dia to drain water with PVC accessories on wall/ceiling as per specification No: WG-MA/CON. AP-WCR/WC Supplying.00 Each 63900 1103 65003. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 3 TR capacity 250V.28 622.00 Mtr. 134 13. Mtr.84 196. 60 8.00 Mtr. Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 32 mm complete. 2) As per BEE guidelines Appliances shall be used of star rating 3) The above rates for split AC are inclusive of refrigerant piping upto 6 meter length Sqm. testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 liters per hour 3-3-3 and storage capacity 80 liters. For item no 3-2-16 to 3-2-19.1.84 15. Mtr. supply having 2 No of air handling unit (Multi spilt) hi-wall mounting type complete at position as per specification No. 97 8. erecting.53 72888. 1476/79 with one year guarantee for sealed unit in refrigeration system and marking Sr. increase overall rate by 100% Supplying & erecting copper pipe suitable for refrigeration system having 22 gauge thickness and inner dia / size 22 mm complete.1 1) In future if AC units having star rating more than prescribed in the above items are if available in the market. No.00 257. 1.45 105. AP-AC/SAC Supplying and erecting split type room Airconditioning unit 3TR capacity 440 V. As per specification No. For item no 3-2-14 to 3-2-15. fan for cooling. rates for nitrite rubber insulation with necessary material on refrigerant piping. suitable for operation on 230/250 Volts 50 cycles 3-3-1 complete with automatic temperature control conforming to IS specifications No. 1.72 148.00 Each 71338 6738. 1476/79 with one year guarantee for sealed unit in refrigeration system and marking Sr. Supplying and erecting split type room Airconditioning unit 2.00 Each 40714 388.C.5 / 2 mil thickness.5 41103.84 15. Supplying refrigerator domestic type approved make 285 to 310 liters storage capacity.00 Each 54285 388.00 Each 66149 6738.C.00 Each 61609 6738.45 68. copper storage tank and copper coils with water spraying arrangement as per specifications no. testing and commissioning Solar cum Natural water cooler suitable for hot and dry weather nominal coolling capaicty of 20 litres along with solar panel.1 Supplying and laying rigid PVC conduit 32 mm dia to drain water with PVC accessories on wall/ceiling as per specification No: WG-MA/CON.53 68348. 180 241 15. erecting. erecting. and date of erection.00 Each 21004 0 21004. supply having 1 No of air handling unit (Mega spilt) mounting type complete at position as per specification No. Supplying. 1. Mtr. 579 43. C.47 68000. APINV Supplying. supply.51 8491. APWCR/DAC 77600 1103 78703.mtr. fan for cooling.00 3-4-3 3. 3.m per minute as per specification No.5 Water Purifiers (WPF) 3-5-1 3-5-2 3-5-3 Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 5 Ltr/min with activated carbon filter and softener operating on 230 V single phase A. APINV Each 8624 104.with higher protection facility.Water Coolers should be used of star rating 3 and above as per B. normal cooling capacity of 85 cu.00 3-6-3 Each 19250 2079.6(B)Inverter for Lifts 3-6-5 Supplying. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. installing. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. 50 cycles. testing & commissioning of 800 VA Digital pure sine wave inverter based on IGBT technology single phase 230V.47 73510. AP.07 10737. installing.5143 7642.LIFT-INV ( Without Battery) Supplying. AP-WCR/DAC Supplying evaporative air cooler (desert cooler) 230/250 Volts. AP-WCR/solar WC Appliances such as refrigerator. installing. testing and commissioning Solar cum Natural water cooler Each suitable for hot and dry weather nominal coolling capaicty of 50 litres along with solar panel. AP.normal cooling capacity of 65 cu.E.00 3-6-7 .89 13998.07 8515.with higher protection facility. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 6 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology.51 8729.47 78048.m per minute complete as per specification No. testing & commissioning of 1400 VA Digital pure sine wave inverter based on IGBT technology single phase 230V.00 3-6-6 Each 75841 2207. installing.4 Air Coolers (ACR) Supplying evaporative air cooler (desert cooler) 230/250 Volts. copper storage tank and copper coils with water spraying arrangement as per specifications no. 3.LIFT-INV ( Without Battery) Each 65793 2207. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no.00 3-4-1 Each 6354 0 6354. normal cooling capacity of 50 cu.50 Hz complete with 1 hr tubular battery backup as per specification no. 50 cycles. APINV Supplying.with higher protection facility. 50 cycles.C.50 Hz complete with 1 hr tubular battery backup as per specification no. supply. testing & commissioning of 2500 VA Digital pure sine wave inverter based on IGBT technology single phase 230V. installing.00 Each 8386 104.3-3-7 new Supplying and erecting. AP. 50 Hz complete with 1 hr tubular battery backup as per specification no.51 Each 7623 892.73 21330.00 Each 7538 104. testing & commissioning of Digital pure sine wave inverter for lift (3ph to 3 ph) having capacity 4 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8 W capacity choke made of copper wire and two indicator lamps with output of purified water 3 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.E.00 3-6-4 3. AP-WCR/DAC Supplying evaporative air cooler (desert cooler) 230/250 Volts.00 3-4-2 Each 7716 0 7716.00 Note :- Each 5106 0 5106.00 3-6-1 Each 9845 892.6(A) Inverter (INV) Supplying. testing & commissioning of 600 VA Digital pure sine wave inverter based on IGBT technology single phase 230V. installing. Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 1 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.00 3-6-2 Each 12749 1248. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 5 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. AP-INV Supplying. installing.00 Each 71303 2207.LIFT-INV ( Without Battery) Supplying. supply. per minute complete as per specification No.50 Hz complete with 1 hr tubular battery backup as per specification no.C. AP.00 3-7-1 Each 32641 0 32641. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 15 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. AP. installing.38 237214.3-6-8 Supplying.along with necessary tubular batteries for onr hour battery backup. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no.LIFT-INV ( Without Battery) Supplying.LIFT-INV ( Without Battery) Supplying. AP.00 3-6-12 Each 165294 2697.00 Each 104362 2207. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity10 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. as per specification No. installing.with higher protection facility.LIFT-INV ( Without Battery) Supplying. installing. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. AP-UPS Supplying & erecting On line UPS pure sine wave of 5 kVA capacity complete with standard features. AP-UPS Supplying & erecting On line UPS pure sine wave of 10 kVA capacity complete with standard features.00 3-6-10 Each 145523 2697. installing.along with necessary tubular batteries for onr hour battery backup.47 106569.31 157619.7 On line UPS (UPS) Supplying & erecting On line UPS pure sine wave of 1 kVA capacity complete with standard features.00 3-6-15 Each 262525 3210. as per specification No. installing. as per specification No.along with necessary tubular batteries for onr hour battery backup.47 92632.LIFT-INV ( Without Battery) 3.LIFT-INV ( Without Battery) Supplying.00 3-6-16 Each 22394 0 22394.00 3-7-3 Each 92052 0 92052. AP. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 25kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 30kVAwith features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. AP.along with necessary tubular batteries for onr hour battery backup. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no.5 / 8 kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. AP-UPS Each 90425 2207. as per specification No.00 3-7-4 Each 132868 0 132868 3-7-5 Each 176462 0 176462 3-7-6 Each 250750 0 250750 3-7-7 .LIFT-INV ( Without Battery) Supplying.31 148220. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 12/12.00 3-6-14 Each 234004 3210.LIFT-INV ( Without Battery) Supplying.with higher protection facility. AP-UPS Supplying & erecting On line UPS pure sine wave of 2 kVA capacity complete with standard features. AP-UPS Supplying & erecting On line UPS pure sine wave of 3 kVA capacity complete with standard features.31 167991. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 20kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 35kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology.00 3-6-13 Each 186685 3210. AP. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 18kVA with features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology. AP-UPS Supplying & erecting On line UPS pure sine wave of 8 kVA capacity complete with standard features. AP. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no.with higher protection facility. AP-UPS Supplying & erecting On line UPS pure sine wave of 6 kVA capacity complete with standard features. as per specification No.00 3-6-9 Each 117650 2207.00 3-7-2 Each 41325 0 41325.with higher protection facility.with higher protection facility. AP.along with necessary tubular batteries for onr hour battery backup. installing. installing.00 3-6-11 Each 154922 2697. as per specification No. installing.38 265735. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no.LIFT-INV ( Without Battery) Supplying.5 kVAwith features a) Backup surge current delievery greater than 350% b) balanced type with micro controller based high frequency IGBT technology.with higher protection facility.with higher protection facility. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no. as per specification No.along with necessary tubular batteries for onr hour battery backup.along with necessary tubular batteries for onr hour battery backup.LIFT-INV ( Without Battery) Supplying. AP. ultra isolation with inbuilt forced aircooling and high responce in less time complete as per specification no.47 119857.with higher protection facility.38 189895. testing & commissioning of pure sine wave inverter for lift (3ph to 3 ph) having capacity 7. installing.with higher protection facility. No. and date of erection.5 TR.1 101987.2 623.00 19183.62 83. The rates for item no 3.26 50335. 1 kVA maximum load and with voltmeter.00 624. 4 kVA maximum load and with voltmeter.0 TR.00 3-9-5 Each 13026 0 13026. No.1 to 3. buck and boost type for operation on input voltage 160 to 270V and output voltage 200 to 250V rated for. 3 kVA maximum load and with voltmeter.00 3-9-1 Each 2605 0 2605. Testing & Commissioning of Solar water heating system without heat exchanger type of 250 LPD capacity as per specification No. No.73 6804.73 250.10. duly charged complete with 30 months warranty complete Supplying and erecting 12 V/100AH TUBULAR Battery with battery terminal wire. and marking Sr. and marking Sr. Providing single phase auto/manual line voltage servo motor operated voltage stabilizer conforming to IS 9815-1981 rated for 165 to 250 Volts and output voltage 230 +/<196> 1% Volts of 5 kVA capacity and marking Sr. Supplying and erecting fully automatic line Voltage stabilizer. buck and boost type for operation on input voltage 160 to 270 V and output voltage 200 to 250 V rated for.00 Each 48435 1900. 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top suitable for refrigerator for continuous operation and marking Sr.4 89.00 10009. buck and boost type for operation on input voltage 160 to 270 V and output voltage 200 to 250 V rated for.00 3-9-4 Each 7179 0 7179. duly charged complete with 30 months warranty complete Supplying and erecting 12 V/180AH TUBULAR Battery with battery terminal wire.00 15386. selector switch. AP-VS/SVS Each 1563 0 1563. ESD-SHWS Supplying & Installing. between site and section office. and date of erection. 5 kVA maximum load and with voltmeter. selector switch. selector switch. ESD-SHWS Each 29529 1266. Supplying and erecting fully automatic line Voltage stabilizer. 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16A plug top suitable for Water Cooler below 120 liter cooling capacity.10.84 30796.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km. duly charged complete with 30 months warranty complete Supplying and erecting 12 V/210AH TUBULAR Battery with battery terminal wire.73 89. No. Dismantling the existing window type air conditioner of any type and capacity safely without any damages and making the site clear. selector switch. Each Each Each 13 0 0 51. No. AP-VS/SVS Providing single phase auto/manual line voltage servo motor operated voltage stabilizer conforming to IS 9815-1981 rated for 165 to 250V and output voltage 230 +/<196> 1% Volts of 3 kVA capacity and marking Sr.00 16449. and marking Sr. and date of erection. Supplying and erecting fully automatic line Voltage stabilizer.00 Each 98820 3167.00 3-9-6 Each 7816 0 7816. and marking Sr. Supplying and erecting fully automatic line Voltage stabilizer. and date of erection. and date of erection as per specification no.3. Testing & Commissioning of Solar water heating system without heat exchanger type of 125 LPD capacity as per specification No. No.00 . duly charged complete with 30 months warranty complete Supplying and erecting 12 V/120AH TUBULAR Battery with battery terminal wire. and date of erection as per specification No.00 250. ESD-SHWS Supplying & Installing.1 Solar Hot Water System (SHWS) 4-1-1 4-1-2 4-1-3 Supplying & Installing.17 68. 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top suitable for Air Conditioner of 2. duly charged complete with 30 months warranty complete Each Each Each Each Each Each 6744 9940 15317 19100 16359 19568 60.00 Chapter 4 : ENERGY SAVING DEVICES (ESD) 4.92 65.00 3-9-2 Each 3462 0 3462.5 kVA maximum load and with voltmeter.8 Inverter & UPS Batteries 3-8-1 (New) 3-8-2 3-8-3 3-8-4 3-8-5 3-8-6 Supplying and erecting 12 V/80AH TUBULAR Battery with battery terminal wire. selector switch.00 19658. and date of erection. buck and boost type for operation on input voltage 160 to 270 V and output voltage 200 to 250 V rated for.10 Dismantling 3-10-1 3-10-2 3-10-3 Note:- Dismantling the existing electric Geyser or storage type water heater of any size along with plumbing connections and making the site clear. 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top suitable for Air Conditioner of 1 TR / Water Cooler of 120 liter cooling capacity and above. 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top suitable for Air Conditioner of 1.00 3-9-3 Each 6368 0 6368. Testing & Commissioning of Solar water heating system without heat exchanger type of 500 LPD capacity as per specification No.00 3-9-7 3. duly charged complete with 30 months warranty complete Supplying and erecting 12 V/150AH TUBULAR Battery with battery terminal wire.62 68. No.9 Voltage Stabilizers (VS) Supplying and erecting fully automatic line voltage stabilizer buck and boost type for operation on input voltage 160 to 270 V and output voltage 200 to 250 V rated for 0. Dismantling the existing split type air conditioner of any type and capacity safely without any damages and making the site clear.00 3. 00 Mtr.62 327. 1007 100. (ESD-HWP/PCP) Supplying and erecting 20 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories. 3) For providing SWHS system with glass tube collector deduct overall rate by 20 % Each 181852 6334. 59 2. (ESD-HWP/PCP) Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 6 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 9 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 12 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 16 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 19 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 22 mm as per specification no ESD-ENR Mtr.4-1-4 4-1-5 4-1-6 Note :- Supplying & Installing.11 61. (ESD-HWP/PCP) Supplying and erecting 25 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories. with internal as well as external end sealing arrangement as per specification No.00 Mtr. with necessary material as per specification no.29 624. (ESD-HWP/PCP) Supplying and erecting 40 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories. 749 49.28 85. with internal as well as external end sealing arrangement as per specification no.00 Mtr. (ESD-HWP/TGP) Supplying and erecting G.11 55. 277 49.00 Mtr. (ESD-HWP/PCP) Supplying and erecting 16 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories. Rest Houses.11 77.62 636.2 Pipes for Solar Hot Water System 4-2-1 4-2-2 4-2-3 4-2-4 4-2-5 4-2-6 4-2-7 4-2-8 4-2-9 4-2-10 4-2-11 4-2-12 4-2-13 4-2-14 Supplying and erecting G. 235 49.00 Mtr. 107 6. 809 100.00 4-2-15 Mtr.I pipe 15 mm dia B class with resin bonded flap rock wool/glass wool insulation. 80 5.00 Mtr.00 Mtr.28 101. ESD-SHWS Deleted Deleted 1)If the Solar water heating system is to be provided with heat exchanger increase overall rates by 15% 2)For all Hostel Bldg.I pipe 20 mm dia B class with resin bonded flap rock wool/glass wool insulation.00 4-2-16 Mtr.00 Mtr.62 397.62 285. Dormitories and upto 2 Storey Residential quarters.00 Mtr.00 4-2-17 Mtr.33 113.00 Mtr.I pipe 40 mm dia B class with resin bonded flap rock wool/glass wool insulation. with necessary material as per specification No.29 909.I pipe 25 mm dia B class with resin bonded flap rock wool/glass wool insulation. 53 2. 586 49.00 Mtr.I pipe 50 mm dia B class with resin bonded flap rock wool/glass wool insulation. with necessary material as per specification No.00 4-2-18 Mtr. 277 49. 405 49.I pipe 32 mm dia B class with resin bonded flap rock wool/glass wool insulation.00 Mtr. with internal as well as external end sealing arrangement as per specification No. (ESD-HWP/TGP) Supplying and erecting G. Testing & Commissioning of Solar water heating system without heat exchanger type of 1000 LPD capacity as per specification No. 524 100. 75 2. Solar water heating System shall be proposed for new installation and for replacement / renovation instead of Electrical water Heater.00 4.2 188186. with necessary material as per specification No.62 519.62 327. (ESD-HWP/TGP) Supplying and erecting 12 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories.00 . 96 5. (ESD-HWP/TGP) Supplying and erecting G.29 774. with necessary material as per specification No. with internal as well as external end sealing arrangement as per specification No.62 455. with necessary material as per specification No. 674 100.29 1107. Circuit Houses. (ESD-HWP/TGP) Supplying and erecting G. (ESD-HWP/PCP) Supplying and erecting 32 mm polyethylene composite pipe duly joined by compression/crimp fitted accessories.00 Mtr. 347 49. with internal as well as external end sealing arrangement as per specification No. 469 49. with internal as well as external end sealing arrangement as per specification No. (ESD-HWP/TGP) Supplying and erecting G.62 799. 189 8. 40 Ah battery as per specification no.00 Each 3075 40. the above items should be taken along with provided street light pole bracket and necessary street light fitting 4. 1 No D C fan rating < 20 W. 32 bit. Deleted Supplying.00 . as per specification no (ESDED/PQA) After carrying out detailed Power Quality analysis of existing load and on the basis of analysis Active Harmonic filter is to be provided. ESD-ED/DAHF Supplying and erecting 30 kVAR . 50 cycles. with use of necessary equipment's and submission of detail analysis report with remedial measures.77 4829.3 8285. 12 V.64 34334. with Digital Closed Loop Active Filter with Source Current Sensing. Digital Signal processing. 440 V Three phase.00 Each 8128 157. THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL. 12 V.39 143.00 Each 9638 157. and commissioning of Digital Active 60 A Harmonic filter cum Power conditioner.00 Mtr.00 Mtr. APFC Panel) (ESD) Carrying out Power quality analysis of the exisiting load at point of supply/or as directed.3 8608. with pole. testing. c c foundtion. 124 7.00 4-4-1 per feeder 0 4828.00 Each 17636 0 17636. suitable for 50 kW load as per specification no ESD-APFC Each 32123 2210.00 Each 10338 0 10338. 136 7. ESD-SOL/SHL Supplying & erecting Solar home Light system with structure as per MNES specification with 1 no of CFL lamp of 9 W / 11W. 20Ah battery as per specification No. battery. ESDSOL/SHL Supplying and erecting Solar panel comprising high efficiency monocrystane / multi cryline Photo Voltaic Cell 20 W Per Single module suitable for 4-5 hrs backup with necessary clamps and module frame as per specification no. ESD-SOL/BAT Supplying and erecting approved make battery with capacity of 12 V 75 AH with duty cycle 10-12 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts as per specification no.3 Solar Lighting (SOL) 4-3-1 4-3-2 4-3-3 4-3-4 4-3-5 4-3-6 4-3-7 4-3-8 4-3-9 Note :- Supplying & erecting duly certified by MNES Solar Street Light Fitting with 9/11 W CFL. consisting of (10kx3) steps of APP type capacitor units confirming to IS13585 ( Part – I ) 1994 with harmonic filter reactors. ESDSOL/GEN While framing the estimate of solar street light with solar PV panel .39 131. ESD-SOL/CELL Supplying and erecting approved make battery with capacity of 12 V 25 AH with duty cycle 8-10 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts as per specification no.88 174299.00 Each 13117 157. converter.4-2-19 4-2-20 4-2-21 Note :- Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 28 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 32 mm as per specification no ESD-ENR Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having 9 mm thickness and inner diameter / sizes 42 mm as per specification no ESD-ENR 1) For polyethylene composite pipe additional insulation may be proposed where there is drastic fall in temperature due to atmospheric condition Mtr.4 Energy Devices (Harmonic Filter. 12 V. High speed IGBTs in power circuit with necessary CTs to be mounted on existing cable/bus and shunted to supply as per specification No. 12 V.3 9795. 50 Hz for connecting between battery and light fixture as per specification no. 40Ah battery as per specification No.00 4-4-2 4-4-3 Each 550207 0 550207.45 197.12 3115.00 4-4-4 Each 149226 25072. ESD-SOL/SHL Supplying & erecting Solar home Light system with structure as per MNES specification with 2 nos of CFL lamp of 9 W / 11W. ESD-SOL/BAT Supplying and erecting approved make battery with capacity of 12 V 40 AH with duty cycle 10-12 hrssuitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts as per specification no.00 4. in addition to necessary capacitors / APFC with capacitors. ESD-SOL/STL Supplying & erecting Solar home Light system with structure as per MNES specification with 1 no of CFL lamp of 9 W / 11W.00 Each 17818 0 17818. erecting.00 Each 8451 157.3 13274. 75 AH battery Complete as per specification no. ESD-SOL/BAT Supplying and erecting Solar Power Generator up to 100 WP 230V. 49 1044040. 440 V Three phase.56 5054. and commissioning of Digital Active 150 A Harmonic filter cum Power conditioner.00 Each 317840 25072. ESD-ED/DAHF After doing quality analysis . suitable for 200 kW load as per specification no ESD-APFC Supplying. suitable for 200 kW load as per specification no ESD-APFC Supplying and erecting 250 kVAR .00 4-4-12 (New) Each 1042496 1544. 50 cycles.00 .56 4050. consisting of (25k x4 +15k x1 +10kx1) steps of APP type capacitor units confirming to IS. consisting of (25k x4 +15k x1 +10kx1) steps of APP type capacitor units confirming to IS. with necessary materials. High speed IGBTs in power circuit with necessary CTs to be mounted on existing cable/bus and shunted to supply as per specification No. suitable for 200 kW load as per specification no ESD-APFC Supplying and erecting 200 kVAR .13585 ( Part – I ) 1994 with harmonic filter reactors.C.00 Note :- 4.00 Each 926663 1544. 50 cycles.13585 ( Part – I ) 1994 with harmonic filter reactors. suitable for 75 kW load as per specification no ESD-APFC Each 162196 25072. suitable for 100 kW load as per specification no ESD-APFC Supplying and erecting 80/100 kVAR .13585 ( Part – I ) 1994 with harmonic filter reactors. Supplying and erecting two pole power contactor 250V 12A for time switch complete erected on wooden block/provided box.13585 ( Part – I ) 1994 with harmonic filter reactors. THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL. 440 V Three phase. erecting. The unit is digitally controlled system with spike protector to enhance the life of the compressor and the unit is installed in MS powder coated box. Supplying and erecting 4 pole power contactor 440V 16A for time switch complete erected on wooden block/provided box.88 519940. THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL. 440 V Three phase. consisting of (25k x2 +15k x2) steps of APP type capacitor units confirming to IS. 50 cycles.13585 ( Part – I ) 1994 with harmonic filter reactors. THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL. with necessary materials.88 187269. 50 cycles. consisting of (25k x4 +15k x1 +10kx1) steps of APP type capacitor units confirming to IS. 32 bit. THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL. Supplying and erecting 4 pole power contactor 440V 40A for time switch complete erected on wooden block/provided box. with Digital Closed Loop Active Filter with Source Current Sensing. Supplying and erecting two pole power contactor 250V 32A for time switch complete erected on wooden block/provided box. suitable for 150 kW load as per specification no ESD-APFC Supplying and erecting 125/150 kVAR .00 Each 233533 25072. Digital Signal processing.S. with necessary materials. with Digital Closed Loop Active Filter with Source Current Sensing.88 601288. at least 3 minutes initial time delay with automatic operation from 1 minute to 24 hours settings .00 4-5-6 Each 1021 55. with necessary materials. ESD-ED/DAHF Supplying.00 Each 576215 25072.49 928207.00 4-5-7 Each 4671 55.95 965.13585 ( Part – I ) 1994 with harmonic filter reactors. 440 V Three phase. consisting of (25k + 15k +10k) steps of APP type capacitor units confirming to IS. 50 cycles. testing. powder coated box.95 4727. Each 188137 25072. testing. having built in rechargeable Nickel Cadmium batteries to run the time switch on failure of supply having switch contact rating upto 16A to use independently or in conjunction with contactor.95 1077. if it is observed that filters are required to compensate only reactive power and not harmonics then the above items shall be used with proper designing.88 213210. and commissioning of Digital Active 100 A Harmonic filter cum Power conditioner.95 3252. 440 V Three phase.00 4-4-6 4-4-7 4-4-8 4-4-9 (New) 4-4-10 (New) 4-4-11 (New) Supplying and erecting 50 kVAR . Supplying and erecting an energy saver for air conditioner working on 180260 V cut off controlled voltage with suitable MCB for over current and short circuit protection.62 2784. THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL. 32 bit. erecting. THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL.00 4-5-3 Each 2734 49.4-4-5 Supplying and erecting 40 kVAR . Supplying and erecting Quartz Electronic time switch having 24 hour dial to work on 250V 50 cycle A.88 258606. consisting of (15k x 2 + 10k x1) steps of APP type capacitor units confirming to IS.00 Each 4020 29. 440 V Three phase.00 4-5-4 Each 909 55.88 342913. 50 cycles.5 Miscellaneous 4-5-1 4-5-2 Supplying and erecting protector and Energy saver equipment working on 180-260 V cut off control with suitable MCB and built up timer + 3 minutes and automatic operation for 1 minute to 24 hours adjustable and all installed in M. Each 5024 29. Digital Signal processing. High speed IGBTs in power circuit with necessary CTs to be mounted on existing cable/bus and shunted to supply as per specification No.00 Each 494867 25072.00 4-5-5 Each 3196 55. 95 with lens (Equivalent to 1 x 18 W CFL ) as per specification no ESD.34 4511. > 0. Supplying and erecting Mega Intelligent Energy Saver suitable up to 5 TR Window / Split Type Air Conditioning Unit working on voltage of 230V single phase solid state microprocessor based intelligent control wall mounting connected to indoor unit as per specification no ESD. > 0.2 10913. > 0.LED /IDF Supplying & Erecting approved make recess/surface type LED fittings of size 1200 mm x 150 mm.2 20746.95 with transparent lens (Equivalent to 2 x 36W CFL ) as per specification no ESD-LED /ODF Supplying & Erecting LED Flood Light fitting of appropriate size with 48 / 40 S W lux level at ground min 50 lux . > 0. > 0.00 Each 4429 82.34 4511.00 Each 14599 82.34 4839.34 3202.95 with transparent lens (Equivelant to 150 W fitting) as per specification no ESD-LED /ODF Each 5249 82. with minimum 150 lux level at working plane with P. > 0.AC Supplying and erecting Mega Intelligent Energy Saver suitable fo package Type Air Conditioning Unit working on voltage of 230V single phase solid state microprocessor based intelligent control wall mounting connected to indoor unit ESD.2 8780.with minimum 150 lux level at working plane with P.LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 75 mm dia round / square shape.95 with frosted glass (Equivalent to 1 x 15 W CFL ) as per specification no ESD.F. relay output 230V / 10A with 10 Hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in MS box in an approved manner. > 0.00 Each 8784 82. > 0.00 4.F.34 3773.00 Each 20496 250.2 22396.f.12 W.F.34 5331.f. with minimum 300 lux level at working plane & angle of dispersion of 90 degree.f.95 with transparent lens (Equivalent to 1 x 35 W Halogen bulb ) as per specification no ESD.with p.95 8158.00 Each 22146 250.30 W.LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 150 mm dia round / square shape.00 Each 4757 82.95 with frosted glass (Equivalent to 1 x 18 watt CFL ) as per specification no ESD-LED /BHF Supplying & Erecting Spot light LED fitting of appropriate size with 6 W with minimum 75 lux level at ground level with p.f.f.95 with frosted glass (Equivalent to 1 x 40 W FTL ) as per specification no ESD. 8W.00 Each 10663 250. 5 W with minimum 50 lux level at working plane with P.00 Each 2095 82. with minimum 100 lux level at working plane with P.30 W.LED / HAL Supplying & Erecting Spot light LED fitting of appropriate size with 3 W with minimum 50 lux level at ground level with p.F.LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 125 mm dia round / square shape.00 Each 3120 82.00 Each 14599 82.F.with p. > 0.34 2543. > 0.6 LED Fittings (ESD-LED) 4-6-1 4-6-2 4-6-3 4-6-4 4-6-5 4-6-6 4-6-7 4-6-8 4-6-9 4-6-10 4-6-11 4-6-12 4-6-13 4-6-14 4-6-15 4-6-16 Supplying & Erecting approved make recess/surface type LED fittings of size 600 mm x 600 mm.95 with transparent lens (Equivalent to 2 x 11 W CFL ) as per specification no ESD-LED /ODF Supplying & Erecting LED street light suitable with 15 W with minimum 1012 lux level at ground level with p.00 4-5-10 6742 Per Ton 409.15 W.95 with frosted glass (Equivalent to 2 x 18 W CFL ) as per specification no ESD.00 Each 4429 82.95 with frosted glass (Equivalent to 1 x 18 W CFL ) as per specification no ESDLED /IDF Supplying & Erecting approved make recess/surface type LED fittings of size 600 mm x 600 mm.34 14681. 11 W.2 6238.95 with frosted glass (Equivalent to 2 x 40 W FTL ) as per specification no ESD.LED /IDF Supplying & Erecting approved make recess/surface type LED fittings of size 1200mm x 150mm.00 Each 5988 250.00 Each 8530 250. with P.f.f.00 .f.34 8866. with minimum 200 lux level at working plane 2m below with P.00 Each 2461 82.F.LED /IDF Supplying & Erecting approved make recess/surface LED down lighter fitting of 150 mm dia round / square shape. > 0.with minimum 300 lux level at working plane 2m below with P. with P. with minimum 200 lux level at working plane 2m below & angle of dispersion of 90 degree.00 4-5-9 Each 6068 353.95 with frosted glass (Equivalent to 2 x 15 W CFL ) as per specification no ESD. > 0.95 with transparent lens (Equivalent to 2 x 18 W CFL ) as per specification no ESD-LED /ODF Supplying & Erecting LED street light suitable with 30 W with minimum 1820 lux level at ground level with p. > 0. > 0.61 7152.95 with transparent lens (Equivelant to 75 W fitting) as per specification no ESD-LED /ODF Supplying & Erecting LED Flood Light fitting of appropriate size with 56/ 48 W lux level at ground min 50 lux .4-5-8 Supplying and erecting Programmable Digital Almanac Timer Microcontroller based with real time clock to operate on derived switching“ON” & switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display. > 0. 15 W. > 0.AC Each 8102 55.34 14681.66 6422.34 2177.95 with lens (Equivalent to 1 x 11 W CFL ) as per specification no ESD.LED /IDF Supplying & Erecting LED bulkhead Fitting of appropriate size with 8 W with minimum 50-70 lux level at ground level with p.95 with transparent lens (Equivalent to 1 x 50 W Halogen bulb ) as per specification no ESD-LED /HAL Supplying & Erecting LED street light suitable with 12 W with minimum 68 lux level at ground level with p.F.F.00 Each 3691 82. switch surface type/ flush type 32A 250V with indicator lamp as per specification No.with p.00 5-1-3 Each 781 47. lux level at ground min 50 lux .51 47.00 5-1-4 5-1-5 Each Each 2262 800 47.with p.2 21997.LED /IDF Supplying & erecting Round LED flexible rope indoor light. ATS (SWR) 5-1-1 5-1-2 Supplying and erecting Bakelite D.00 4-6-21 Each 21747 250. SWSWR/MTP Supplying and erecting Triple pole metal/ iron clad switch & fuse 415/ 500V 32A on iron frame/board as per specification No. NI-CD/NI-MH rechargeable battery up to 24 hrs aluminium body with SS cover (IP 65) as per specification no ESD-LED /ODF Supplying & Erecting approved make recess/surface type LED fittings with 2 hrs battery backup of size 1200mm x 150mm.00 2580.51 829.00 848.51 47.51 2310. wiring & connections etc. SW-SWR/MDP Supplying and erecting Triple pole metal/ iron clad switch & H.51 182.95 with transparent lens as per specification no ESDLED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 74 W .2 34699.f.00 4-6-25 (New) Mtr. Supplying and erecting power cord ( Adaptor ) for Round LED / strip LED / neon flex LED rope light Each 31168 250.28 816.00 Chapter : 5 SWITCHGEARS (SW) 5.00 4-6-19 Each 20647 250.00 5-1-6 5-1-7 5-1-8 Each Each Each 1095 2517 4657 47.f.95 with transparent lens as per specification no ESDLED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 24/26 W .34 7608. type fuse and neutral link 250V.28 1151. SW-SWR/MTP Each Each 134 414 47.95 with transparent lens as per specification no ESDLED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 37 W .with p.with minimum 0 200 lux level with 120 dispertion angle with brush steel finish housing at working plane 2m below with P.00 4-6-24 (New) Each 7526 82.95 with transparent lens (Equivelant to 400 Watts fitting) as per specification no ESD-LED /ODF Supplying & Erecting LED solar street light of appropriate size suitable for 50 lux level at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 12/14 W .with p. > 0. SWSWR/MDP Supplying and erecting double pole metal /iron clad switch with H.with p.15 W.2 41202.C. > 0.51 63.63 1143. SW-SWR/MDP Supplying and erecting double pole metal /iron clad switch with fuse 63A 250V on iron frame/board as per specification No.95 with frosted glass (Equivalent to 40 -50 FTG ) as per specification no ESD.C. 391 5.4-6-17 4-6-18 Supplying & Erecting LED Flood Light fitting of appropriate size with 80 / 70 W lux level at ground min 50 lux .95 with transparent lens (Equivelant to 250 W fitting) as per specification no ESD-LED /ODF Supplying & Erecting LED Flood Light fitting of appropriate size with 115 / 100 W lux level at ground min 50 lux . type fuse 415/ 500V 16A on iron frame/board as per specification No.00 4-6-27 (New) Mtr.00 Each 34449 250.2 wire with 5 W per meter suitable for 240 V AC supply in any colour with 3400 degree kelvins to 7000 degree k with necessary material. 32A on iron frame/board as per specification No.00 4-6-28 (New) Each 417 5.f. 1146 5.2 18396.IC/MC Switchgears. > 0. > 0.28 422. > 0.with p.95 with transparent lens as per specification no ESD-LED /ODF Supplying & Erecting foot light / pathway rechargeable 5 W LED fitting with 2 hrs backup .00 4-6-22 Each 40952 250.2 31418. Supplying & erecting LED neon flex rope indoor light. Supplying & erecting Flexible strip LED rope indoor light. 811 5. lux level at ground min 50 lux .2 wire with 3 to 4 W per meter suitable for 240 V AC supply in any colour with 3400 degree kelvins to 7000 degree k with necessary material.34 125.1 LT .00 4-6-26 (New) Mtr.f.34 4511.00 4-6-20 Each 18146 250.00 462.00 4783.F.5 to 2 W per meter suitable for 240 V AC supply in any colour with 3400 degree kelvins to 7000 degree k with necessary material. lux level at ground min 50 lux .P.00 . lux level at ground min 50 lux . > 0.f. SW-SWR/MTP Supplying and erecting Triple pole metal/ iron clad switch and fuse 415/500V 63A on angle iron frame as per specification No.00 4-6-23 Each 4429 82. > 0.2 wire with 1.2 20897. wiring & connections etc.f. SW-SWR/MTP Supplying and erecting Triple pole metal/ iron clad switch and fuse 415/ 500V 100A on angle iron frame as per specification No.28 396. SW-SWR/BDP Supplying and erecting double pole metal /iron clad switch with fuse and neutral link 250V 16A on iron frame/board as per specification No. wiring & connections etc. 00 . SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 800A with neutral link with ISI marked HRC fuses. on angle iron frame as per specification No. Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switch suitable for 440V.24 8438.SW-SWR/MTP Supplying and erecting Triple pole iron clad H.00 Each 16351 235.00 Each 13360 157. erected on provided angle iron frame and connected with provided leads.26 20664.00 Each 1773 78.51 1559. on angle iron frame as per specification No.00 Each 994 63.00 Each 741 63.34 1057. Supplying and erecting two pole iron clad/ metal clad ON LOAD change over switch 16A 250V erected on angle iron frame approved make and duly connected with suitable wire leads.00 Each 20413 251.12 1851. 415/500V erected on angle iron frame approved make. high transfer speed. with Enclosure.26 24887. 415/ 500V erected on angle iron frame approved make.00 Each 3376 63. automatic/manual inbuilt Time delay.00 Each 7317 118.13 13844.00 Each 1070 47.42 16586.34 3439. SWSWR/MTP Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 300A with ISI marked HRC fuses.26 22971.C. superior making capacity.00 Each 13671 173.wireable fuse switch 415/ 500V 200A on angle iron frame as per specification No. on angle iron frame as per specification No.26 24676.3 8853. SW-SWR/MTP Supplying and erecting Triple pole iron clad H. Each 6173 125.5-1-9 5-1-10 5-1-11 5-1-12 5-1-13 5-1-14 5-1-15 5-1-16 5-1-17 5-1-18 5-1-19 5-1-20 5-1-21 5-1-22 5-1-23 5-1-24 5-1-25 5-1-26 5-1-27 5-1-28 5-1-29 5-1-30 5-1-31 5-1-32 5-1-33 Supplying and erecting Triple pole metal/ iron clad re.00 Each 5220 78. 50 Hz. SW-SWR/TPHRC Supplying and erecting Triple pole metal / iron clad HRC fuse switch 415/ 500V 300A with neutral link with ISI marked HRC fuses.00 Each 24425 251.3 13517. 415/500V erected on angle iron frame approved make. 415/500V erected on angle iron frame approved make. As per specification No.00 Each 1511 47.00 Each 22720 251. SW-SWR/MTP Supplying and erecting Triple pole metal clad/ iron clad rewireable fuse 415/ 500V 200A with neutral link on angle iron frame as per specification No. 415/500V erected on angle iron frame approved make. SW-SWR/MTP Supplying and erecting Triple pole metal/ iron clad switch and fuse 415/ 500V 100A with neutral link on angle iron frame as per specification No.100 A. Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 300A. excellent breaking capacity.C. SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 400A with neutral link with ISI marked HRC fuses. 415/500V erected on angle iron frame approved make.24 7435. Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 200A.13 11821.34 804. Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 32A. SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 630A with neutral link with ISI marked HRC fuses. Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 63A.00 Each 8696 157.57 4879. compact & light weight. Supplying & erecting on load four pole Iron clad/metal clad ON LOAD change over switch 100A. on angle iron frame.26 36409.00 Each 42720 118.12 5298. type rewireable fuse and switch 415/ 500V 63A with neutral link on angle iron frame as per specification No.SW-SWR/TPHRC Supplying and erecting Triple pole iron clad HC type rewireable fuse and switch 415/ 500V 16A with neutral link on angle iron frame as per specification No.24 42838.00 Each 8320 118.00 Each 11648 173. Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 400A. type rewireable fuse and switch 415/ 500V 32A with neutral link on angle iron frame as per specification No. 100A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1.00 Each 4754 124. with neutral link with ISI marked HRC fuses on angle iron frame as per specification no.12 4392.12 1565.51 1118. SW-SWR/TPHRC Supplying and erecting Triple pole metal/ iron clad HRC fuse switch 415/ 500V 200A with neutral link with ISI marked HRC fuses on angle iron frame as per specification No.00 Each 1487 78. 415/500V erected on angle iron frame approved make. SW-SWR/MTP Supplying and erecting Triple pole metal/ iron clad HRC fuse switch 415/ 500V 63A with neutral link with ISI marked HRC fuses on angle iron frame as per specification No. Supplying and erecting two pole iron clad/ metal clad ON LOAD change over switch 32A 250V erected on angle iron frame approved make and duly connected with suitable wire leads. SW-SWR/TPHRC Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 16A.SW-SWR/TPHRC Supplying and erecting Triple pole metal/ iron clad HRC fuse switch 415/ 500 V.00 Each 12234 173.00 Each 24636 251.13 12407.63 6299.00 Each 4314 78. on angle iron frame as per specification No. on angle iron frame as per specification No.00 Each 36158 251. SW-SWR/TPHRC Supplying and erecting Triple pole metal clad HRC fuse switch 415/ 500V 500A with neutral link with ISI marked HRC fuses. 5-1-34 Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switch suitable for 440V, 50 Hz, 160A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron frame and connected with provided leads. Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switch suitable for 440V, 50 Hz, 200A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron frame and connected with provided leads. Each 52720 173.13 52893.00 5-1-35 Each 60653 173.13 60826.00 5.2 IC / MC Distribution Boards (DB) 5-2-1 Supplying and erecting metal clad distribution board approved make 250V. 2 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 250V 3 way, 16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 250V, 4 way, 16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SW-SWR/MDB Supplying and erecting metal clad distribution board approved make 250V. 6 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 250V. 8 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 415/500V, 3 way, 16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 415/500V, 4 way, 16A per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 415/500V, 6 way, 16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 415/500 V, 8 way, 16 A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SW-SWR/MDB Supplying and erecting metal clad distribution board approved make 415/500V, 3 way, 32A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 415/500V, 4 way, 32A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 415/500V, 6 way, 32A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting metal clad distribution board approved make 415/500V, 8 way, 32A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification No. SWSWR/MDB Supplying and erecting mini feeder pillar triple pole with 200A FPMCCB as incomer and 2 outgoing circuits with HRC Fuse base and Cartridge of 100A consists of aluminium,bus bar 500 V 200 A. complete erected in 14 gauge CRCA sheet box with supporting angles, self locks, gasket and slanting top to be erected on provided foundation as per per specification No. SW-SWR/MFP Supplying and erecting mini feeder pillar triple pole with 300A FPMCCB as incomer and 3 outgoing circuits with HRC Fuse base and Cartridge of 100A consists of aluminium,bus bar 500V 300A complete erected in 14 gauge CRCA sheet box with supporting angles, self locks, gasket and slanting top to be erected on provided foundation as per per specification No. SW-SWR/MFP Each 351 24.28 375.00 5-2-2 Each 449 24.28 473.00 5-2-3 Each 537 24.28 561.00 5-2-4 Each 685 24.28 709.00 5-2-5 Each 855 24.28 879.00 5-2-6 Each 1295 47.51 1343.00 5-2-7 Each 2286 47.51 2334.00 5-2-8 Each 3311 47.51 3359.00 5-2-9 Each 3836 55.95 3892.00 5-2-10 Each 3303 47.51 3351.00 5-2-11 Each 4274 47.51 4322.00 5-2-12 Each 5330 47.51 5378.00 5-2-13 Each 6712 63.34 6775.00 5-2-14 Each 31207 3545.04 34752.00 5-2-15 Each 47480 4011.66 51492.00 Note :- 1) For erection of switchgear on existing/provided angle iron frame/wooden board reduce the over all rate by 5%. 2) In coastal area iron clad switchgear shall be invariably used. 3) For Switchgear without enclosure for cubical panels the rates shall be decreased by 25 % of item no 5-1-16 to 5-1-23 4) If 'A' grade switchgears the overall rate shall be increased by 15% for item No.5-1-16 to 5-1-23. 5.3 LT - - MCB's (MCB) 5-3-1 5-3-2 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SWSWR/MCB Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking SPMCB 40A to 63A C- series (for motor/power) in provided distribution board as per specification No. SWSWR/MCB Supplying, erecting & marking SPMCB 40A to 63A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SWSWR/MCB Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board as per specification No. SWSWR/MCB Supplying, erecting & marking DPMCB 40A to 63A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking SPN MCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB Supplying, erecting & marking SPN MCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB Supplying, erecting & marking SPN MCB 40A, C-series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking SPN MCB 40A, B-series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking TPN MCB 6A to 32A, C- series in provided distribution board as per specification No. SW-SWR/MCB Supplying, erecting & marking TPN MCB 40A to 63A, C- Series in provided distribution board as per specification No. SW-SWR/MCB Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker (Conforming to IS:8828 of1996) of 40A with required wiring connections and lugs etc. in provided distribution board. Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board. Supplying erecting and marking Triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provided distribution board. Supplying erecting and marking Triple pole isolators only switch version of miniature circuit breaker of 100A with required wiring connections and lugs etc. in provided distribution board. Supplying erecting and marking Four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. Supplying erecting and marking Four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board. Supplying erecting and marking Four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board. 1) For lighting load 'B' series MCBs are to be provided and for motive power load 'C' series MCB s are to be provided 2) For heavy duty motors, welding transformers and machines having heavy surge current MCB of 'D' type series should be provided for which rates are to be taken by increasing 10% on the material cost of rates of 'C' series Each Each 227 156 20.06 20.06 247.00 176.00 5-3-3 5-3-4 Each Each 145 365 20.06 20.06 165.00 385.00 5-3-5 5-3-6 Each Each 324 530 20.06 20.06 344.00 550.00 5-3-7 5-3-8 Each Each 471 775 20.06 20.06 491.00 795.00 5-3-9 5-3-10 Each Each 757 476 20.06 20.06 777.00 496.00 5-3-11 Each 434 20.06 454.00 5-3-12 5-3-13 5-3-14 5-3-15 5-3-16 5-3-17 5-3-18 5-3-19 5-3-20 Each Each Each Each Each Each Each Each Each 652 605 760 1169 1074 1542 1006 1470 302 20.06 20.06 42.23 42.23 42.23 42.23 42.23 42.23 20.06 672.00 625.06 802.00 1211.00 1116.00 1584.00 1048.00 1512.00 322.00 5-3-21 Each 578 38.01 616.00 5-3-22 Each 644 38.01 682.00 5-3-23 Each 780 55.95 836.00 5-3-24 5-3-25 5-3-26 Note :- Each Each Each 697 723 905 55.95 55.95 63.34 753.00 779.00 968.00 5.4 LT - - MCBDB's (MCBDB) 5-4-1 Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted, suitable for SPMCB of 12 ways, on iron frame/laminated board.(Horizontal type) as per specification No. SWSWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SPMCB of 24 ways, on iron frame/laminated board.(Horizontal type) as per specification No. SWSWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SPMCB of 36 ways, on iron frame/laminated board.(Horizontal type) as per specification No. SWSWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP (12 Poles)/TP (4 Poles) MCB of 4 ways (12 Poles), on iron frame/laminated board.(Vertical Busbar type) as per specification No. SW-SWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP (24 Poles)/TP (8 Poles) MCB of 8 ways (24 Poles) on iron frame/laminated board. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP (36 Poles)/TP (12 Poles) MCB of 12 ways (36 Poles) on iron frame/laminated board (Vertical Busbar type) as per specification No. SW-SWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron frame/laminated board.(Horizontal type) as per specification No. SWSWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron frame/laminated board.(Horizontal type) as per specification No. SWSWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways (36 Poles) on iron frame/laminated board. (Horizontal Busbar type) as per specification no. SW-SWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP (12 Poles)/TP (4 Poles) MCB of 4 ways (12 Poles), on iron frame/laminated board.(Vertical Busbar type) as per specification No. SW-SWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP (24 Poles)/TP (8 Poles) MCB of 8 ways (24 Poles) on iron frame/laminated board. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP (36 Poles)/TP (12 Poles) MCB of 12 ways (36 Poles) on iron frame/laminated board. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB Supplying, erecting and marking enclosure Single pole and neutral distribution board (SPNDB) one way for SPMCB 1 No on iron frame/laminated board as per specification No. SW-SWR/MCBDB Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 4 ways for outgoing SPMCBs on iron frame/laminated board, as per specification no. SW-SWR/MCBDB Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 8 ways for outgoing SP MCB’s on iron frame/laminated board as per specification No. SW-SWR/MCBDB Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 12 ways for outgoing SP MCB’s on iron frame/laminated board as per specification No. SW-SWR/MCBDB Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 4 ways for outgoing SP MCB’s on iron frame/laminated board as per specification No. SW-SWR/MCBDB Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 8 ways for outgoing SP MCB’s on iron frame/laminated board as per specification No. SW-SWR/MCBDB Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 12 ways for outgoing SP MCB’s on iron frame/laminated board as per specification No. SW-SWR/MCBDB Each 1647 142.52 1790.00 5-4-2 Each 2288 142.52 2431.00 5-4-3 Each 2930 142.52 3073.00 5-4-4 Each 3894 142.52 4037.00 5-4-5 Each 5205 142.52 5348.00 5-4-6 Each 6864 142.52 7007.00 5-4-7 Each 2402 142.52 2545.00 5-4-8 Each 3566 142.52 3709.00 5-4-9 Each 4876 142.52 5019.00 5-4-10 Each 5694 142.52 5837.00 5-4-11 Each 6923 142.52 7066.00 5-4-12 Each 8660 142.52 8803.00 5-4-13 Each 199 22.17 221.00 5-4-14 Each 653 41.17 694.00 5-4-15 Each 837 41.17 878.00 5-4-16 Each 1058 41.17 1099.00 5-4-17 Each 1043 41.17 1084.00 5-4-18 Each 1308 41.17 1349.00 5-4-19 Each 1675 41.17 1716.00 5-4-20 5-4-21 5-4-22 5-4-23 5-4-24 5-4-25 5-4-26 5-4-27 Note :- Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron frame. Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30 A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30 A. triple pole MCB complete erected on angle iron frame. Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 10A. 2 pin plug and earth socket and 10A, 3 pin plug top with 10A single pole miniature circuit breakers complete erected on angle iron frame. Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame. Supplying and erecting blanking plate of suitable size on MCB DB Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (12 Poles) or TP MCB of 4 ways (12 Poles) on iron frame. (Vertical Busbar type) as per specification no. SWSWR/MCBDB1 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (24 Poles) or TP MCB of 8 ways (24 Poles) , on iron frame. (Vertical Busbar type) as per specification No. SWSWR/MCBDB1 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (36 Poles) or TP MCB of 12 ways (36 Poles) on iron frame. (Vertical Busbar type) as per specification No. SWSWR/MCBDB1 1) All MCB's shall have breaking capacity not less than 10 kA. 2) Above rates are applicable only to factory made enclosures. 3) Reduce overall rates by 5% if angle iron frame is not required. 4) MCB's ( double pole, four pole or triple pole & neutral) & isolators for single phase circuits shall not be incorporated for outgoing circuits of three phase distribution board. 5) For more than 5 kW load RCCB/ELCB shall invariably be provided & erected on the same distribution board. (RCCB/ELCB+MCB) or (RCCB/ELCB+MCCB etc,) separate box for RCCB/ELCB is not permissible. 6) Above rates are for branded DB's with provision of same brand interior switchgears and if other than branded are used reduce material rate by 10% . 7) The MCBDB is exclusive of incoming MCB/MCCB and outgoing SP/TP MCB's and the same should be preferably of the same make Each 896 47.51 944.00 Each 1732 47.51 1780.00 Each 884 41.17 925.00 Each Each Each 339 14 6157 24.28 0 195.3 363.00 14.00 6352.00 Each 7162 195.3 7357.00 Each 8284 195.3 8479.00 5.5 LT - - MCCB's (MCCB) 5-5-1 Providing & erecting 3 Pole MCCB upto 100A of 25kA SC rating, thermal and magnetic setting with provided leads on iron frame/laminated board as per specification No. SW-SWR/MCCB Providing & erecting 3 Pole MCCB of 200A. capacity with S.C. rating 35 kA thermal and magnetic setting with provided leads on iron frame/laminated board as per specification no. SW-SWR/MCCB Providing & erecting 3 Pole MCCB of 250A. capacity with S.C. rating of 35 kA,thermal and magnetic setting with provided leads on iron frame/laminated board as per specification No. SW-SWR/MCCB Providing & erecting 3 Pole MCCB of 400A. capacity with S.C. rating of 50 kA ,thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB Providing & erecting 3 Pole MCCB of 600/630 A. capacity with S C rating of 50 kA ,thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB Providing & erecting 3 Pole MCCB of 800A. capacity with S C rating of 50 kA, thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB 1) For erecting earth leakage relay along with breaker add Rs. 750/- for shunt release coil 2) For use of 4pole MCCB in place of 3pole MCCB add 30% in overall rate of 3 pole MCCB. 3) For MCCB with variable setting, increase overall rate by 25% Each 4701 630.25 5331.00 5-5-2 Each 10738 661.92 11400.00 5-5-3 Each 15600 661.92 16262.00 5-5-4 Each 21945 661.92 22607.00 5-5-5 Each 26265 1025.08 27290.00 5-5-6 Each 31687 1103.21 32790.00 Note :- 5.6 RCCB (RCCB) 5-6-1 Providing, erecting & commissioning RCCB only of electro magnetic type with 20 kA breaking capacity of 16/25 A. 2 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB only of electro magnetic type with 20 kA breaking capacity of 40 A. 2 pole complete as per specification No. SW-RCCB/RCCB Each 1894 174.19 2068.00 5-6-2 Each 2668 174.19 2842.00 5-6-3 5-6-4 5-6-5 5-6-6 5-6-7 5-6-8 5-6-9 5-6-10 5-6-11 5-6-12 5-6-13 5-6-14 5-6-15 5-6-16 5-6-17 5-6-18 5-6-19 Providing, erecting & commissioning RCCB only of electro magnetic type with 20 kA breaking capacity of 63 A. 2 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB only of electro magnetic type with 20 kA breaking capacity of 16/25A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB only of electro magnetic type with 20 KA breaking capacity of 40A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB of electro magnetic type with 20 kA breaking capacity of 63A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning RCCB of electro magnetic type with 20 kA breaking capacity of 80A. 4 pole complete as per specification No. SW-RCCB/RCCB Providing, erecting & commissioning approved make RCCB of electro magnetic type with 20 kA breaking capacity of 100A, 4 pole complete as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 6/10/16/20/25A, 2 Pole, 1 Phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 32A/40A 2 Pole 1 phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 63A, 2 Pole 1 Phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 6A/10A/16A/20A/25/A 4 Pole 3 phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 32A/40A 4 Pole 3 phase as per specification No. SW-RCCB/RCCB Supplying, fixing and commissioning RCCB+MCB, electro magnetic type 6 kA. breaking capacity of 63A 4 Pole 3 phase as per specification No. SW-RCCB/RCCB Supplying & fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB/RCCB+MCB complete on iron frame/laminated board. Supplying & fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB/RCCB+MCB complete on iron frame/laminated board. Deleted Deleted Deleted Each 3462 174.19 3636.00 Each 3228 174.19 3402.00 Each 3306 174.19 3480.00 Each 3815 174.19 3989.00 Each 5318 174.19 5492.00 Each 5318 174.19 5492.00 Each 2359 174.19 2533.00 Each 3099 174.19 3273.00 Each 2593 174.19 2767.00 Each 3346 174.19 3520.00 Each 3449 142.52 3592.00 Each 3099 174.19 3273.00 Each Each 145 207 20.06 20.06 165.00 227.00 5.7 MCCB Panel Boards and accessories (SWR-MCCBPB) 5-7-1 Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 250A, 2 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB.(Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 250A, 4 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 250A, 6 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 250A, 8 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 250A, 12 ways Four pole outgoing erected on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 400A, 2 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 400A, 4 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 400 A, 6 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 400A, 8 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 400A, 12 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) Each 27475 850.89 28326.00 5-7-2 Each 34136 850.89 34987.00 5-7-3 Each 40293 850.89 41144.00 5-7-4 Each 43081 1240.45 44321.00 5-7-5 Each 63168 1631.06 64799.00 5-7-6 Each 34141 850.89 34992.00 5-7-7 Each 40567 850.89 41418.00 5-7-8 Each 46702 850.89 47553.00 5-7-9 Each 49507 1240.45 50747.00 5-7-10 Each 69577 1631.06 71208.00 Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 12 way outgoing or 400A incoming and 6/8 way outgoing made from CRCA sheet 1. 3 pole with standard acccessories on provided iron frame as per specification No.92 68194.00 5-8-7 Each 112941 2253.00 Note :- 5. 500V.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. 500V. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 4 way outgoing or 400A incoming and 2 way outgoing made from CRCA sheet 1.00 5-8-3 Each 65940 2253. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 400A incoming and 12 way outgoing made from CRCA sheet 1.00 5-7-14 Set.24 20840. 1) The MCCB panel board and cable alleys from above items are interconnected and should be of same make only and factory made only 2) The MCCB panel board is exclusive of incoming and outgoing MCCB's and the same should be preferably of the same make 3) In the MCCB panel both FP/TP MCCB's as incomer and FP/TP/ SP MCCB's can be provided as outgoing Set. 3 pole with standard acccessories on provided iron frame as per specification No. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated nondrawout type of 800A. 3 pole with standard acccessories on provided iron frame as per specification No. 13322 156.92 115195. load break switch with fuses of required rating.24 17744.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. 3 pole with standard acccessories on provided iron frame as per specification No. SW-SWR/ACB Each 57282 2063. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated drawout type of 1250 A. 500V. VCB (HTS) 5-9-1 Supplying and erecting approved make extendable / non-extendable type 11 kV.00 5-8-5 Each 93200 2253.9 133083.92 144618. 500V. 3 pole with standard acccessories on provided iron frame as per specification No.92 134010.24 13478.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated nondrawout type of 1600A. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated nondrawout type of 1000A.Air Circuit Breakers (ACB) 5-8-1 5-8-2 Deleted Supplying and erecting Air circuit breaker manually operated nondrawout type of 630A. on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Each 123627 9455. 17588 156.24 15471.92 110285. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated drawout type of 1600A. 500V. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated drawout type of 800A.00 5-8-6 Each 108031 2253.24 15471. 15315 156.92 70058.9 HT SF6 Load Break Switch .00 5-7-13 Set. 3 pole with standard acccessories on provided iron frame as per specification No.00 5-8-4 Each 67804 2253. 630A. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated Non drawout type of 1250A. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.00 5-7-15 Set.00 5-8-8 Each 142364 2253.89 59346.92 95454.92 90793.00 Each 131756 2253. 3 pole with standard acccessories on provided iron frame as per specification No.8 LT .00 5-7-12 Set. 15315 156. 500V. Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 6 way outgoing or 400A incoming and 4 way outgoing made from CRCA sheet 1. 500V. 3 pole with standard acccessories on provided iron frame as per specification No. 3 pole with standard acccessories on provided iron frame as per specification No.5-7-11 Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 2 way outgoing made from CRCA sheet 1.00 5.24 11638.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB.00 . 500V.00 5-8-9 (New) 5-8-10 (New) Each 88539 2253. 500V.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB.00 5-7-16 Set. SW-SWR/ACB Supplying and erecting Air circuit breaker manually operated drawout type of 1000A. 11482 156. 20684 156.. type 500V 63A approved make erected on polished wooden block.00 164.9 539707.00 81.00 33. Indoor type Ring Main unit with 1or 2 Incoming & 2 or 1 Outgoing with HRC fuses complete erected on provided c c foundation/MS channels/trench.56 16. Supplying and erecting H.C. Vacuum Circuit breaker of required rating. 630A.89 6.00 170. type 500V 32A approved make erected on polished wooden block. etc.00 Each 530251 9455.11 10.10 Accessories (AS) 5-10-1 5-10-2 5-10-3 5-10-4 5-10-5 5-10-6 Supplying and erecting porcelain base iron clad cut out of H. Supplying and erecting bakelite fuse fitting suitable for HRC bolted type fuse up to 32A without fuse.C.84 10.56 10.00 7922. Vacuum Circuit breaker of required rating.9 638247. 2) For outdoor installations IP 65 Protection Class is to be proposed by increasing overall rates by 10%. 630 A.00 5-10-8 5-10-9 5-10-10 5-10-11 5-10-12 5-10-13 5-10-14 5-10-15 5-10-16 5-10-17 5-10-18 Each Each Each Each Each Each Each Each Each Each Each 30 159 257 433 524 145 194 490 56 70 153 2. pattern porcelain fuse bridges with base & HC type fuse links 250V 32A approved make erected on polished wooden block.00 450. Supplying and erecting22 kV HRC Fuse 63A for load break switch to be fitted with necessary nut bolts and commissioning complete. in an approved manner as per specification no SW-HTS / RMU Supplying and erecting approved make 11kV.9 243920. type 500V 16A approved make erected on polished wooden block. Supplying and erecting22kV HRC Fuse 10A to 30A for load break switch to be fitted with necessary nut bolts and commissioning complete.00 339.33 157. on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying and erecting approved make extendable / non-extendable type 11 kV 630A.5-9-2 5-9-3 5-9-4 5-9-5 5-9-6 5-9-7 5-9-8 5-9-9 5-9-10 5-9-11 5-9-12 5-9-13 Note :- Supplying and erecting approved make extendable / non-extendable type 22 kV.12 40. Oil Switch-Fuse unit extendable/non-extendable on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying & erecting 11 kV 630A. 1) The above items are for Indoor installation with IP 55 Protection Class.00 Each 143875 9455.00 506.00 6937.00 Each 150099 9455. Load break Isolator switch on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying and erecting approved make extendable / non-extendable type 22 kV 630A. Supplying & erecting fuse bridges with base H.89 16.C. on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / VCB Supplying and erecting approved make 22 kV.00 67. Supplying and erecting bakelite fuse fitting suitable for HRC bolted type fuse up to 63A without fuse.00 Each 266436 9455. type fuse links 250/500V 63A erected on polished wooden block. Supplying & erecting fuse bridges with base H. load break Isolator switch on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS Supplying and erecting approved make 11 kV 400A. Supplying and erecting Iron clad cut out H. Each 234464 9455. type 500V 100A approved make erected on polished wooden block.00 Each 628791 9455.00 5-10-7 Each 73 6.00 Each 330382 94228.12 40.72 14.00 619.56 32.00 5. Supplying and erecting bakelite fuse fitting suitable for HRC bolted type fuse up to 100A without fuse.9 153331. Supplying & erecting fuse bridge with base 16A erected on provided switch board in approved manner. Indoor type Ring Main unit with 1or 2 Incoming & 2 or 1 Outgoing with HRC fuses complete erected on provided cc foundation/MS channels/trench. load break switch with fuses of required rating. Supplying and erecting Iron clad cut out H. type 500V 200A approved make erected on polished wooden block.5 9.00 Each Each Each Each 3237 6897 7882 8727 40.C.56 10.C.9 836309.33 79. 630A. Supplying and erecting Iron clad cut out H.89 16.C.00 8767. pattern porcelain fuse bridges with base & HC type fuse links 250V 16A approved make erected on polished wooden block. type fuse links 250/500V 300A erected on polished wooden block.00 209.00 1232. Supplying and erecting H.00 Each 826853 9455. Supplying & erecting ISI marked HRC fuse cartridge 500V 32A Supplying & erecting ISI marked HRC fuse cartridge 500V 63 A Supplying & erecting ISI marked HRC fuse cartridge 500V 100A Each Each Each Each Each Each 147 161 329 602 1215 27 9. type fuse links 250/500V 100A erected on polished wooden block.89 13.78 15.89 16.9 159555.5 16.9 275892. Supplying and erecting Iron clad cut out H. on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / VCB Supplying and erecting 11kV HRC Fuse 10A to 40 A for load break switch to be fitted with necessary nut bolts and commissioning complete.C.C.12 3277. in an approved manner as per specification no SW-HTS / RMU Supplying & erecting 22 kV 630A. type fuse links 250/500V 200A erected on polished wooden block. Supplying & erecting fuse bridges with base H. etc.61 424611.00 541.00 159.00 171.00 274.C.12 40.C. Supplying & erecting fuse bridges with base H.5 9.C.00 . Supplying and erecting11kV HRC Fuse 63A for load break switch to be fitted with necessary nut bolts and commissioning complete. 00 37.1 to 5.00 113. 300 78. Supplying & erecting approved make 500V 32A porcelain base neutral link complete erected in provided M. bending. 1104 99. rivetting etc.00 61. drilling.00 56. Supplying & erecting approved make 500V 63A porcelain base neutral link complete erected in provided M.7 1622.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km. sheet 1.I.24 99. and painting with one coat of red lead paint and 2 coats of enamel paint. drilling.11.56 8.28 71. bending.00 805. drilling.24 1402. and painting with one coat of red lead paint and 2 coats of enamel paint. drilling. complete.S.47 1007. including cutting.S.24 905.1 Sheets (SH) 6-1-1 CRCA sheet 2mm (14 gauge) to be used for fabrication of boxes panel boards etc. nuts bolts etc.00 357.11 Dismantling 5-11-1 5-11-2 5-11-3 Note :Dismantling the existing switchgears. and Bus bar of any size complete with/ without board or angle iron frame Making the site clear of dismantled DB and switch gears by refilling the holes with cement mortar & finishing in an approved manner. Acrylic sheet 3 mm thick to be used for covering the CRCA sheet boxes etc. including cutting. welding. welding.7 1913. for total items in each estimate. 1580 278.00 Note :6-1-8 Sqm. including cutting. CRCA sheet 1. Sqm. including cutting. 1634 278. including cutting.00 6-1-2 Sqm. rivetting etc.I.78 7. Supplying & erecting approved make porcelain/epoxy bus bar support complete erected in provided M.00 6-1-4 Sqm.00 5. box for 100A Supplying & erecting approved make porcelain/epoxy bus bar support complete erected in provided M.I.52 593. m. Dismantling existing OCB.00 10. rivetting etc. sheet 0.5-10-19 5-10-20 5-10-21 5-10-22 5-10-23 5-10-24 5-10-25 5-10-26 5-10-27 5-10-28 5-10-29 (New) Supplying & erecting ISI marked HRC fuse cartridge 500V 200A Supplying & erecting ISI marked HRC fuse cartridge 500V 300A Supplying & erecting ISI marked HRC fuse cartridge 500V 400A Supplying & erecting approved make 500V 16A porcelain base neutral link complete erected in provided M.00 311. welding.6mm (16 gauge) to be used for fabrication of boxes panel boards etc. box. drilling. rivetting etc.00 78.00 6-1-5 Sqm. box. G. sheet 0. including cutting. box. nuts bolts etc.78 232.00 6-1-14 Sqm. welding. bending. 469 123. The rates for item no 5. Supplying & erecting approved make 500V 100A porcelain base neutral link complete erected in provided M.7 1583.00 Chapter : 6 CONTROL PANEL (CP) 6. Each Each Each 5 0 0 10. drilling.8 1101.39 7.00 6-1-6 Sqm. including cutting. welding. including cutting. G.56 10.25mm (18gauge) to be used for fabrication of boxes panel boards etc.VCB complete from existing panel board in an approved manner. 806 706 99. and painting with one coat of red lead paint and 2 coats of enamel paint. Sqm. box for 400A Supplying & erecting approved make 500V 200A porcelain base neutral link complete erected in provided M. Supplying and erecting Plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws. G. bending. and painting with one coat of red lead paint and 2 coats of enamel paint.00 6-1-12 Sqm. complete.LBS.11.00 6-1-3 Sqm. and painting with one coat of red lead paint and 2 coats of enamel paint. 1303 99. Acrylic sheet 2 mm thick for covering wall entries including cutting drilling and fixing with nut bolts / screws etc.47 1329. welding.56 5. rivetting etc.00 81.79 11. Each Each Each Each Each Each Each Each Each Each Each 221 300 700 48 70 105 190 30 54 74 342 10.S. G.45 14.00 6-1-11 Sqm. ACB. and painting with one coat of red lead paint and 2 coats of enamel paint.S.79 648. bending. Increase overall rate by 30% for CRCA & GI sheets measuring less than one sq. wall fasteners supports. bending.7 1859.S.I.8mm (22 gauge) to be used for fabrication of boxes panel boards etc. DB. box. Supplying & pasting Sunmica/ Formica sheet 1 mm thick on provided Plywood of required shade.6mm (16 gauge) to be used for fabrication of boxes panel boards etc.00 6-1-9 6-1-10 Sqm.45 8. complete. 934 166.00 6-1-13 Sqm. box. rivetting etc. bending.39 7.00 711.12 378. welding. drilling. wall fasteners supports. between site and section office.00 6-1-7 Sqm. & pasting or fixing with nut bolts/ screws etc. drilling. G. sheet 1. 576 71.39 14. 1304 278.S. and painting with one coat of red lead paint and 2 coats of enamel paint.S. rivetting etc.24 1203. Supplying and erecting Plywood 6 mm thick fixed to wall or on provided panel board with necessary materials such as screws.00 72. Supplying and erecting Hylam sheet/ Ebonite 6 mm thick for covering wall entries including cutting drilling and fixing with nut bolts / screws etc. 790 217.00 . box for 200/300A Supplying & erecting approved make porcelain/epoxy bus bar support complete erected in provided M.56 10. 1343 278.00 205. sheet 1mm (20 gauge) to be used for fabrication of boxes panel boards etc.45 8.I. complete Supplying and erecting Hylam sheet/ Ebonite sheet 3 mm thick for covering wall entries including cutting drilling and fixing with nut bolts / screws etc. complete. 1112 217.S. complete.6mm (24 gauge) to be used for fabrication of boxes panel boards etc. S.00 6. board duly wired with required size of weather proof PVC wires duly tested for class II accuracy by electric supply company. 100A complete as per specification no. complete.36 5604. Mtr.00 5063.2 Bus bars (BB) 6-2-1 6-2-2 6-2-3 6-2-4 6-2-5 6-2-6 6-2-7 6-2-8 Note :Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars.56 61. 96 25. CP-BB Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars. 2103 496. made of brass duly erected.57 3302.00 6-1-19 Kg.28 178.00 4021. Mtr. CP-BB 1) Nut. 1043 123. as per I. Supplying & erecting Static energy meter 230V. Mtr. Meter with LCD / LED display complete erected on polished T. bolts holding the lugs to bus bar shall be of bimetallic/brass/cadmium plated steel. 500V. 500V 200A complete as per specification no. Supplying and erecting Static Energy meter 440-V 50 cycles A. 148 199 29.56 24. flush with surface of panel/cupboard.00 Each 31 29. 3) In fabrication of bus bar chamber if angle iron frame is not provided.W. 500V 630A complete as per specification no.18 2599. CP-BB Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars.C.3 Measuring Instruments 6-3-1 Supplying and erecting Static energy meter with impulse counter 230V 50 cycles A.00 6-3-4 Each 5446 158. (Size of cupboard shall be specified in the estimate) Supplying and erecting Iron work for panel board or other purposes complete with bending. square mesh 15 SWG having 20/25 mm square.) Sqm. Supplying and erecting enamel iron G.00 Each 88 24. 4) The rates for item no 6-2-1 to 6-2-8 are for 1 meter length of bus bar.S. Meter with LCD/ LED display complete erected on polished T. 3 phase 4 wires 50A ISI mark meter with LCD/LED Display complete erected on polished T. CP-BB Supplying and erecting Bus bar chamber triple pole with neutral with four Copper bars. 500V 400A complete as per specification no. CP-BB Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars. ISI mark. nuts bolts etc.I. Each 2833 124.I. properly fixed/welded and duly painted with one coat of red oxide and two coats of silver/enamel paint (size of jali or enclosure to be specified in the estimate. board duly wired with required size of weather proof PVC wires duly tested for class II accuracy by electric supply company. Cupboard duly grouted with suitable size of iron work in wall at the bottom.00 6-1-20 6-1-21 Each Sqm.marked with metal/polycarbonate encloser.00 6036. cutting. 500V. Supplying & erecting Static Energy meter 440V 50 cycles AC supply 3 phase 4 wire 10/20/25/30A class I accuracy I.C.I. 500V 800A complete as per specification no.W. Mtr.36 5191. Mtr.S. 100A complete as per specification no. Providing and erecting cupboard for enclosing switchgears or for any other purpose made from selected marine plywood planks 19 mm. supply 5/10/20A.34 121. 3241 3435 3585 5600 8953 10004 4627 5497 436 436 436 436 436 436 436 436 3677. marked with metal/polycarbonate enclosure. Supplying and erecting G. wall fasteners supports. 500V 300A complete as per specification no.00 6-3-2 Each 3177 124. Mtr.6-1-15 6-1-16 6-1-17 6-1-18 Supplying and erecting marine Plywood 19 mm thick fixed to wall or on provided panel board with necessary materials such as screws. Supplying and erecting expanded metal jali enclosure made from G. complete.W. complete erected on polished T.W. 50 cycles AC supply 5/10/20/40 A Class I accuracy I.I. board duly wired with required size of weather proof PVC wires duly tested for classII accuracy by electric supply company.00 3871.25mm (18gauge) size 200 x 150 mm.00 Sqm.52 1167. sheet 1.57 2958. sheet of 1.28 112.00 223. Mtr.00 6-3-3 Each 5033 158. drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority (Size of angle/flat/channel iron to be specified in estimate) Supplying and erecting self locking arrangement with duplicate keys. duly painted with red oxide & enamel paint for displaying the department & date of erection of the electrical installation with approved shade as specified by the authority. Mtr.00 . CP-BB Supplying and erecting Bus bar chamber triple pole with neutral with four Copper bars. board duly wired with required size of weather proof PVC wires duly tested for class II accuracy by electric supply company.25mm (18 gauge) caution board of size 200 x 150 mm.00 6. thick duly varnished/ painted from inside and from outside with brass hinges and locking arrangement with suitable lock with duplicate keys.00 10440.00 9389. 2551 of 1982 in Marathi and Hindi erected at position.I. 2) Double/more bus bars shall be adequately bolted. CP-BB Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars.00 5933. CP-BB Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars. 500V 200A complete as per specification no. deduct 20% from overall rate. erecting. external C.00 6-3-13 Each 1835 158.C Voltage 0 to 500V range.P.s 100/5A to 400/5A ratio and otheraccessories complete erected in provided M.S. 50Hz.(14 SWG) M. with counter meter for measuring no of times the opening of doors. Supplying and erecting Power Factor Meter 150 mm. painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock.F.36 1317. with counter meter for measuring no of times the opening of doors.12/28/75 KVP epoxy terminal block suitable for provided trivector meter.C foundation Each Each 149097 7063. operated. epoxy coated 3 nos C.T. Accuracy class 1.(14 SWG) M.00 Note :- 6. commissioning 11 KV H.T.87 14891. on provided box / panel and connected with necessary PVC wire leads and lugs. erecting.00 6-3-7 Each 492 124.P.00 . top side cover ( C.00 6-4-3 Each 209769 7063. flush type. metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2mm.T. metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2mm.57 747.5.87 7085.S. Providing and erecting Analog type moving iron Ammeter for A.57 617. box and connected to the circuit by means of PVC copper wire leads.T.69 156161.T COVER) interlock with meter doors.sheets with supporting angle and channel. testing.Metering 6-4-1 6-4-2 Deleted Supplying.5.5.T COVER) interlock with meter doors. provision of 3 CTs should invariably be made separately.12/28/75 KVP epoxy terminal block suitable for provided trivector meter. Providing and erecting Analog type moving iron voltmeter for A. box and connected to C. on provided box /panel and connecting with provided CTs and necessary PVC wire leads and lugs. calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. flush type. testing.00 6-3-6 Each 622 124.T.00 6-3-12 Each 1159 158. Providing and erecting Analog type moving iron Ammeter for A.57 804. flush or projection type suitable for 400V. commissioning 22 kV H. box and connected to CTs. Supplying and erecting RKVAH meter 3 phase 4 wire 400 V.T. While framing the estimate for P. meter / RKVAH meter.6-3-5 Supplying and erecting kWH meter provided with maximum kW demand indicator for unbalanced load 3 phase 4 wire 50 cycles 230/440V AC supply with incorporated time switch of 30 minutes integration period and of 15 seconds tune required for decoupling.00 6-3-11 Each 1159 158. suitable to work on provided three numbers of instrument current transformers of class C accuracy with ratio 100/5 A -400/5 A complete with zero adjustment & test certificate from manufacturer erected on provided M. direct range.36 1993.Accuracy class 1. and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.L.C current CT operated of suitable size in scale between 0 to 1000A.C foundation Supplying.S. All meters shall be with manufacturer's calibration certificate.00 6-3-9 Each 10316 281. epoxy coated 3 nos C.5 I.T having required ratio between 5/5A to 100/5A burden 10 VA class 0.C current 0-30 A. Supplying and erecting digital frequency meter of 3 digit LED display having 0 to 100 Hz range suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.00 6-3-8 Each 679 124.T. Supplying and erecting panel mounting type digital ammeter having Three and half digit LED display. dia. Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display.5 I. and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.36 1317.S.S.69 216833.00 6-3-10 Each 6803 281. painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock.) 100/5 Amp to 400/5A ratio with zero adjustment complete erected on provided M.T.s.87 10598. calibrated for 0 to 1000A AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. 500V accuracy class 1.sheets with supporting angle and channel. flush type on provided box/ panel and connecting with necessary PVC wire leads and lugs. 50 cycles suitable for unbalanced load suitable to work on provided current transformer (3 Nos. Each 14609 281. 50 cycles 3 phase 4 wire balanced or unbalanced load to work with appropriately provided C.T having required ratio between 5/5A to 100/5A burden 10 VA class 0.L. top side cover ( C.4 H. 500V. 73 583868. complete housed in the encloser made up of MS structure and fiber glass 3 mm thick with gearbox & handle brought out for operating GOD.00 6-5-2 Each 736 25.5.F. Supplying and erecting bank of All Polypropylene condensors (APP type) with the standard capacities of 2.34 784.10. AB switch 200 to 400A capacity duly interconnected with use of suitable insulators by maintening adequate clearences as per IS.00 6-5-9 Each 480 25.34 670.34 761.48 sq mm (12 SWG) G.C foundation Supplying. (+10%) with externally discharging resistances.34 587.00 6-5-8 Each 590 25. PTs. T.3. Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green.10. as per licencee's requirement.I. 50Hz. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps 230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires. DO fuse set. correction for operation on 3 phase 50 cycles 400/440V.T. resin cast CTs. AB switch 200 to 400A capacity duly interconnected with use of suitable insulators by maintening adequate clearences as per IS. Each 562 25. Each 403954 35816.6-4-4 Supplying. CB-LT/AL Supplying . correction for operation on 3 phase 50 cycles 400/440V.00 .T.on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. wiring & connections etc. as per licencee's requirement.5 and 15 kVAR units of P. metering. erecting. earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee. resin cast CTs.F.5 Accessories 6-5-1 Providing and erecting Selector Switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500V. commissioning cubical comprising 11 kV H. erecting & Terminating PVC armoured cable 2 core 2.F.34 505. 2) In new installation APP type capacitors shall invariably be used. Providing and erecting L.) 1) Erection of MPP type Capacitors shall be avoided. CB-LT/AL Mtr.12. Providing and erecting all bakelite test terminal block with bakelite cover and sealing arrangements erected on provided panel board and connected by the leads of the instrument (This block is to be provided wherever L. M. locking arrangement etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C. 104 10. (+10%) with externally discharging resistances.5. testing (by licencee).56 112. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.00 6-5-7 Each 233 25. 101 10. wiring & connections etc. commissioning cubical comprising 22 kV H. Supplying & erecting LED type indicating pilot lamp with LED colour BLUE. (+10%) with externally discharging resistances. correction for operation on 3 phase 50 cycles 400/440V.3. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. Supplying and erecting bank of metalised polypropylene condensers (MPP) with the standard capacities of 2.34 369.7. earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee. metering. testing (by licencee).12. erecting & Terminating PVC armoured cable 2 core 4 sq mm aluminium conductor with continuous 5.00 7-1-2 Mtr.00 6-4-5 Each 548051 35816.12.3. suitable door openings. complete housed in the encloser made up of MS structure and fiber glass 3 mm thick with gearbox & handle brought out for operating GOD.34 258.5 and 15 kVAR units of P. Supplying and erecting bank of mixdielectric condensors with the standard capacities of 2.00 kVAR 6-5-6 Each 645 25. on provided box / panel and duly connecting with necessary PVC wire leads and lugs.73 439771.56 115. earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee. earth wire complete erected with glands & lugs.00 6-5-3 344 25. erecting.7.00 KVAR 6-5-5 568 25.T. DO fuse set.I. suitable door openings.00 Note :- Chapter : 7 CABLES (CB) 7.34 593. PTs.7.00 KVAR 6-5-4 759 25.00 6. D. 230 / 250 V on provided box / panel with necessary material.5 sq mm aluminium conductor with continuous 5.C foundation . locking arrangement etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C. 230 / 250V on provided box / panel with necessary material. meters and RkVAH meters are to be tested.1 LT Cables (Aluminum) (LT-AL) 7-1-1 Supplying .34 615.5 and 15 kVAR units of P. earth wire complete erected with glands & lugs.5.48 sq mm (12 SWG) G.10. 48 sq mm (12 SWG) G.00 7-1-13 Mtr.56 151.56 144. CB-LT/AL Supplying . CB-LT/AL Supplying . CB-LT/AL Supplying & erecting PVC armoured cable 3 core 6 sq mm aluminium conductor with continuous 5.I. CB-LT/AL Mtr. earth wire complete erected with glands & lugs. CB-LT/AL Supplying . earth wire complete erected with glands & lugs.00 7-1-18 Mtr. erecting & Terminating PVC armoured cable 3 core 35 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.95 186. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I. 153 17. 277 17.48 sq mm (12 SWG) G.00 7-1-11 Mtr.7-1-3 Supplying . CB-LT/AL Supplying . on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. earth wire complete erected with glands & lugs. earth wire complete erected with glands & lugs.95 295.I.48 sq mm (12 SWG) G. 237 17.I. erecting & Terminating PVC armoured cable 3 core 25 sq mm aluminium conductor with continuous 5.I.00 7-1-8 Mtr. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I.00 7-1-16 Mtr. erecting & Terminating PVC armoured cable 2 core 10 sq mm aluminium conductor with continuous 5.00 7-1-7 Mtr.48 sq mm (12 SWG) G. erecting & Terminating PVC armoured cable 3 core 2.00 7-1-14 Mtr.I.48 sq mm (12 SWG) G. 204 17.00 7-1-10 Mtr. earth wire complete erected with glands & lugs.95 272. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.95 213. CB-LT/AL Supplying .I. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.48 sq mm (12 SWG) G.95 255. CB-LT/AL Supplying & erecting PVC armoured cable 3 core 4 sq mm aluminium conductor with continuous 5. erecting & Terminating PVC armoured cable 3 core 50 sq mm aluminium conductor with continuous 5. erecting & TerminatingPVC armoured cable 3 core 10 sq mm aluminium conductor with continuous 5.00 7-1-5 Mtr.56 161.I. erecting & Terminating PVC armoured cable 4 core 6 sq mm aluminium conductor with continuous 5. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying .95 176.00 7-1-17 Mtr. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. 168 17. CB-LT/AL Supplying .95 331.00 7-1-4 Mtr.I.00 7-1-15 Mtr. erecting & Terminating PVC armoured cable 3 core 16 sq mm aluminium conductor with continuous 5. erecting & Terminating PVC armoured cable 4 core 4 sq mm aluminium conductor with continuous 5.I.95 171. earth wire complete erected with glands & lugs.95 150. erecting & Terminating PVC armoured cable 3 1/2 core 35 sq mm aluminium conductor with continuous 5. earth wire complete erected with glands & lugs. 133 10. 132 17.56 122. earth wire complete erected with glands & lugs.56 135.00 . earth wire complete erected with glands & lugs. erecting & TerminatingPVC armoured cable 2 core 6 sq mm aluminium conductor with continuous 5. erecting & Terminating PVC armoured cable 3 1/2 core 25 sq mm aluminium conductor with continuous 5. erecting & Terminating PVC armoured cable 4 core 16 sq mm aluminium conductor with continuous 5. CB-LT/AL Supplying . 111 10. earth wire complete erected with glands & lugs.I. 254 17.56 122.I. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.48 sq mm (12 SWG) G. earth wire complete erected with glands & lugs. earth wire complete erected with glands & lugs. 140 10.00 7-1-9 Mtr.48 sq mm (12 SWG) G. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I. CB-LT/AL Supplying .48 sq mm (12 SWG) G. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.48 sq mm (12 SWG) G. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I. CB-LT/AL Supplying . on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. erecting & Terminating PVC armoured cable 4 core 10 sq mm aluminium conductor with continuous 5. earth wire complete erected with glands & lugs.00 7-1-12 Mtr.48 sq mm (12 SWG) G.5 sq mm aluminium conductor with continuous 5. 158 17. CB-LT/AL Supplying . 150 10. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying .I.48 sq mm (12 SWG) G. 313 17. earth wire complete erected with glands & lugs.95 222. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.48 sq mm (12 SWG) G. earth wire complete erected with glands & lugs. 195 17. 111 10. CB-LT/AL Supplying . earth wire complete erected with glands & lugs.48 sq mm (12 SWG) G.00 7-1-6 Mtr. 124 10.48 sq mm (12 SWG) G. CB-LT/AL Supplying .35 sq mm (10 SWG) G. on wall/ trusses/pole or laid in provided trench/ pipe asper specification no.97 sq mm (8 SWG) G. erecting & Terminating PVC armoured cable 4 core 35 sq mm aluminium conductor with continuous 5. 312 29. erecting & Terminating PVC armoured cable 3 1/2 core 70 sq mm aluminium conductor with continuous 8.00 7-1-30 Mtr. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. erecting & Terminating PVC armoured cable 3 1/2 core 50 sq mm aluminium conductor with continuous 5.56 667.97 sq mm (8 SWG) G. 1308 78. earth wire complete erected with glands & lugs. earth wire complete erected with glands & lugs. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. erecting & TerminatingPVC armoured cable 4 core 70 sq mm aluminium conductor with continuous 8. erecting & Terminating PVC armoured cable 3 1/2 core 95 sq mm aluminium conductor with continuous 8.I. 2) Rate of all cables includes cost of lugs. 1600 78.48 sq mm (12 SWG) G.00 7-1-33 Note :- Mtr. erecting & Terminating PVC armoured cable 3-1/2 core 150 sq mm aluminium conductor with continuous 12. CB-LT/AL Supplying . on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.79 1078. 717 33. erecting and terminating.48 sq mm (12 SWG) G.56 502. Mtr.35 sq mm (10 SWG) G. 831 52.35 sq mm (10 SWG) G. CB-LT/AL Supplying . CB-LT/AL Supplying .56 342.00 7-1-22 Mtr. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.56 397. 2017 78. 3/.00 7-1-24 Mtr. earth wire complete erected with glands & lugs. 3-1/2 core 185 sq mm aluminium conductor with continuous 12.I.00 7-1-26 Mtr. etc. 472 29.56 549.I.97 sq mm (8 SWG) G.56 431.00 7-1-23 Mtr. 257 29.I.48 sq mm (12 SWG) G. 3) For all type of cables instead of reading supplying and erecting read as a supplying. erecting & Terminating PVC armoured cable 3-1/2 core 240 sq mm aluminium conductor with continuous 12.79 884.56 603.12 2095.56 33. CB-LT/AL Supplying . 22 10. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. glands.I. required for erection and connection of cable. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I.I. 519 29.I.I. CB-LT/AL Supplying .I.97 sq mm (8 SWG) G.7-1-19 Supplying . CB-LT/AL Supplying . erecting & Terminating PVC armoured cable 4 core 25 sq mm aluminium conductor with continuous 5. 1025 52.35 sq mm (10 SWG) G.97 sq mm (8 SWG) G.78 751.00 . earth wire complete erected with glands & lugs. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. 367 29. erecting & Terminating PVC armoured cable 1100 V.00 7-1-20 Mtr. CB-LT/AL Supplying . 401 29.I.48 sq mm (12 SWG) G.00 7-1-31 Mtr. earth wire complete erected with glands & lugs.00 7-1-27 Mtr. earth wire complete erected with glands & lugs. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.00 7-1-32 Mtr. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I. earth wire complete erected with glands & lugs.I.12 1386. erecting & Terminating PVC armoured cable 3 1/2 core 120 sq mm aluminium conductor with continuous 12.00 7-1-28 Mtr. CB-LT/AL Supplying . CB-LT/AL Re-erecting PVC armoured cable 2 to 4 Core up to 50 sq mm on wall with necessary material & G. CB-LT/AL Supplying .per meter for erection of cables on stone wall. earth wire complete erected with glands & lugs. earth wire complete erected with glands & lugs. erecting & Terminating PVC armoured cable 4 core 95 sq mm aluminium conductor with continuous 8. earth wire complete erected with glands & lugs.97 sq mm (8 SWG) G. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. 573 29. erecting & Terminating PVC armoured cable 3-1/2 core 400 sq mm aluminium conductor with continuous 12. earth wire complete erected with glands & lugs. erecting & TerminatingPVC armoured cable 4 core 50 sq mm aluminium conductor with continuous 5. earth wire complete erected with glands & lugs. CB-LT/AL Supplying .00 7-1-29 Mtr.I. erecting & Terminating PVC armoured cable 3-1/2 core 300 sq mm aluminium conductor with continuous 12. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying .00 7-1-21 Mtr.I. earth wire complete erected with glands & lugs. CB-LT/AL Supplying . 1) Add Rs.12 1678. earth wire in an approved manner. 637 29. earth wire complete erected with glands & lugs.56 287.00 7-1-25 Mtr. 00 7-2-2 Mtr. erecting & Terminating PVC armoured cable 2 core 4 sq mm copper conductor continuous 5. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. 1418 17.95 520.48 sq mm (12 SWG) G.I.I.00 7-2-12 Mtr. 132 10. CB-LT/CU Mtr.I.00 7-2-10 Mtr.00 .95 1208. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. 207 10. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.48 sq mm (12 SWG) G.56 173.I. erecting & Terminating PVC armoured cable 2 core 2.95 358. earth wire complete erected with glands & lugs. erecting & Terminating PVC armoured cable 3 core 2.56 177. erecting & Terminating PVC armoured cable 3 core 4 sq mm copper conductor continuous 5.56 218.48 sq mm (12 SWG) G.00 7-2-11 Mtr. 314 10.95 1436.I. CB-LT/CU Supplying . erecting & Terminating PVC armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.48 sq mm (12 SWG) G. CB-LT/CU Supplying .95 270. 162 10. CB-LT/CU Supplying . on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I. earth wire complete erected with glands & lugs.00 7-2-5 Mtr.48 sq mm (12 SWG) G.48 sq mm (12 SWG) G. 166 10. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.00 7-2-6 Mtr. earth wire complete erected with glands & lugs. 414 10. 725 17.I.5 sq mm copper conductor continuous 5.I.I. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. 502 17. CB-LT/CU Supplying .56 143. CB-LT/CU Supplying .I. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Supplying . earth wire complete erected with glands & lugs. erecting & Terminating PVC armoured cable 4 core 10 sq mm copper conductor continuous 5. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.48 sq mm (12 SWG) G. earth wire complete erected with glands & lugs. erecting & Terminating PVC armoured cable 2 core 10 sq mm copper conductor continuous 5. erecting & Terminating PVC armoured cable 4 core 35 sq mm copper conductor with continuous 5.I.56 425. 213 10. 252 17.00 7-2-7 Mtr.00 7-2-14 (New) Supplying . earth wire complete erected with glands & lugs. erecting & Terminating PVC armoured cable 4 core 4 sq mm copper conductor continuous 5. earth wire complete erected with glands & lugs. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.5 sq mm copper conductor continuous 5. CB-LT/CU Supplying .00 7-2-8 Mtr. earth wire complete erected with glands & lugs.48 sq mm (12 SWG) G. CB-LT/CU Mtr. earth wire complete erected with glands & lugs. erecting & Terminating PVC armoured cable 4 core 16 sq mm copper conductor with continuous 5. erecting & TerminatingPVC armoured cable 3 core 6 sq mm copper conductor continuous 5.00 7-2-3 Mtr.56 325. earth wire complete erected with glands & lugs.48 sq mm (12 SWG) G. 340 17.56 285.00 7-2-9 Mtr.00 7-2-13 Supplying . CB-LT/CU Mtr.I.7.48 sq mm (12 SWG) G. erecting & Terminating PVC armoured cable 3 core 10 sq mm copper conductor continuous 5. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.I. CB-LT/CU Supplying . erecting & Terminating PVC armoured cable 2 core 6 sq mm copper conductor continuous 5. CB-LT/CU Supplying . CB-LT/CU Supplying . 274 10. CB-LT/CU Supplying . earth wire complete erected with glands & lugs.48 sq mm (12 SWG) G. earth wire complete erected with glands & lugs. 1190 17.48 sq mm (12 SWG) G.56 224.2 LT Cables (Copper) (LT-CU) 7-2-1 Supplying .48 sq mm (12 SWG) G.00 7-2-4 Mtr. earth wire complete erected with glands & lugs.I.95 743. erecting & Terminating PVC armoured cable 4 core 25 sq mm copper conductor with continuous 5. earth wire complete erected with glands & lugs. 00 7-3-13 Mtr.00 7-3-3 Mtr. 1254 30.00 7-3-4 Mtr. 1637 30. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. erecting & Terminating 3 x 95 sq mm 33 kV. erecting & Terminating 3 x 120 sq mm 22 kV.00 7-3-6 Mtr. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. required for erection and connection of cable. erecting and terminating.mm 11 kV. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No.12 1678. erecting & Terminating 3 x 150 sq mm 11 kV. CB-HT Supplying .00 Note :- 7. 1977 30.00 7-3-11 Mtr.00 Note :- 1) Add Rs.00 7-3-10 Mtr. Mtr.00 7-3-8 Mtr. erecting and terminating.per meter for erection of cables on stone wall. CB-HT Supplying . 2009 40. 1474 30.00 7-3-9 Mtr. erecting & Terminating 3 x 300 sq mm 11 kV. erecting & Terminating 3 x 95 sq mm 11 kV. CB-HT Supplying . XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No.62 2008.95 2007.62 1467. CB-HT Supplying . erecting & Terminating 3 x 70 sq mm 22 kV.62 969.62 1565. on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. erecting & Terminating 3 x 240 sq mm 11 kV. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. CB-LT/CU Mtr.12 1458.12 2819. erecting & Terminating 3 x 400 sq mm 11 kV. earth wire complete erected with glands & lugs. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. erecting & Terminating 3 x 120 sq mm 11 kV. 3) For all type of cables instead of reading supplying and erecting read as a supplying. erecting & Terminating 3 x 70 sq mm 33 kV.00 7-3-14 Mtr.00 7-3-12 Mtr. 1418 40. CB-HT Supplying .7-2-15 (New) Supplying . 1105 30.00 7-3-5 Mtr. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. 938 30. erecting & Terminating 3 x 70 sq mm 11 kV. CB-HT Supplying . 1534 30. CB-HT Supplying . CB-HT Supplying . XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. 7. CB-HT Supplying . 1436 30. CB-HT Supplying . XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. CB-HT Supplying . erecting & Terminating PVC armoured cable 4 core 50 sq mm copper conductor with continuous 5. CB-HT Supplying .62 1668. etc.62 1505.12 2084. 2779 40.00 7-3-2 Mtr.62 1136. 1989 17. CB-HT Supplying . 3/. 2124 30. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. erecting & Terminating 3 x 120 sq mm 33 kV. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No.3 HT Cables (HT) 7-3-1 Supplying .62 2155. 2) Rate of all cables includes cost of lugs.I. glands.48 sq mm (12 SWG) G.62 1285. erecting & Terminating 3 x 185 sq. erecting & Terminating 3 x 95 sq mm 22 kV. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No.12 2049.00 7-3-7 Mtr. XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No.4 Cable Joints & End Termination Kits Cable Joints & End Termination Kits (LT Cables) (JT/LT) . 1638 40. 2044 40. CB-HT 1) For all type of cables instead of reading supplying and erecting read as a supplying. 04 17508.00 Each 2911 488. cable. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 240 sq.04 5830.5 to 16 sq.04 13034. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 400 sq.mm.00 Each 171 157. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 33 kV ( E ) XLPE HT cable 3x120 to 185 sq. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 33 kV ( E ) XLPE HT cable 3x70 to 95 sq.49 736.3 383. cable. with necessary material as per specification No.04 7693.mm. mm. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 225 to 300 Sq.79 1085. cable.mm.49 813.00 7-5-3 Each 10930 702.3 704. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x150 to 185 sq.00 7-5-6 Each 12332 702. with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 400 sq.00 Each 463 350.00 Each 1300 350.00 7-5-9 Each 16806 702.mm.04 9234.00 Each 269 245. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 70 to 95 sq mm cable. with necessary material as per specification No. cable.17 2485.mm.49 2525. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 70 to 120 sq.mm. with necessary material as per specification No. with necessary material as per specification No. mm.71 12380. mm. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E ) XLPE HT cable 3x150 to 185 sq. cable.00 Each 1590 245. with necessary material as per specification No. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 2.5 to 16 sq mm. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 25 to 50 sq mm.00 Each 226 157.mm.04 6084. mm. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 300 sq. CB-JT/HT Each 5128 702. cable.00 Each 851 157. mm.3 1008. with necessary material as per specification No.71 8045. with necessary material as per specification No. with necessary material as per specification no.04 11414. with necessary material as per specification No. with necessary material as per specification No.mm. mm.98 515.00 Each 386 350. with necessary material as per specification No.00 7-5-8 Each 10712 702. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 150 to 185 sq.00 7-5-5 Each 8532 702. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 400sq.5 Cable Joints & End Termination Kits (HT Cables) (JT/HT) 7-5-1 Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x70 to 120 sq. with necessary material as per specification No.00 Each 2175 350. CB-JT/LT Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 25 to 50 sq. with necessary material as per specification No. cable.00 7-5-10 Each 7292 752.00 Each 596 488.00 7-5-11 Each 11627 752. cable.7-4-1 7-4-2 7-4-3 7-4-4 7-4-5 7-4-6 7-4-7 7-4-8 7-4-9 7-4-10 7-4-11 7-4-12 7-4-13 Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 2.98 1836.00 Each 2084 401.04 11632. with necessary material as per specification No. cable.00 7-5-7 Each 7191 702. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm.mm. CB-JT/HT Providing and erecting Heat shrinkable out door termination kit for 22 kV ( E ) XLPE HT cable 3x70 to 120 sq mm cable with necessary material as per specification No. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 33 kV ( E ) XLPE HT cable 3x240 to 400 sq. with necessary material as per specification No.00 . cable. with necessary material as per specification No. cable.00 7-5-2 Each 6991 702. with necessary material as per specification No.mm. mm. with necessary material as per specification No.79 3400. with necessary material as per specification No. CB-JT/HT Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x70 to 120 sq mm with necessary material as per specification No.49 1650.3 328. mm. with necessary material as per specification No.00 7-5-4 Each 5382 702. CB-JT/LT Providing & erecting epoxy straight through joint outdoor/indoor for LT PVC armoured cable 120 to 185 sq. CB-JT/LT Each 547 157. CB-JT/HT Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E ) XLPE HT cable 3x70 to 120 sq.00 7.04 7893. cable. I. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 11 kV ( E ) XLPE HT cable 3x150 to 240 sq.5) Supplying & erecting G. 217 14.2.2. with necessary material as per specification No.I.I.29 18403.29 32290. mm. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 33 kV ( E ) XLPE HT cable 3x300 to 400 sq mm with necessary material as per specification No. with necessary material as per specification No.00 Each 33241 877. Mtr. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 33 kV ( E ) XLPE HT cable 3x120 to 185 sq. Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface.1 & 4. para 4. erected for enclosing PVC armoured cable on wall/pole as per specification No. with necessary material as per specification No.2. para 4. CWPLB/GP.00 7-6-3 Mtr.2. 176 9.71 10107. pipe ‘A’ grade 40 mm dia.5 186. 347 14.71 12706.7-5-12 7-5-13 7-5-14 7-5-15 7-5-16 7-5-17 7-5-18 7-5-19 7-5-20 7-5-21 7-5-22 7-5-23 7-5-24 7-5-25 7-5-26 7-5-27 Providing and erecting Heat shrinkable out door termination kit for 33 kV ( E ) XLPE HT cable 3x70 to 95 sq. mm. mm. erected for enclosing PVC armoured cable on wall/pole as per specification No. with necessary material as per specification No.71 20659. 360 220. mm.00 Each 19906 752. para 4.71 8487.00 Each 15558 752. with necessary material as per specification No.29 19668. below road / ground surface. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x150 to 185 sq. mm.1 & 4. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 22 kV ( E ) XLPE HT cable 3x150 to 240 sq.29 39866.00 Each 41467 877. mm with necessary material as per specification No.00 Each 43461 877.29 44338. CWPLB/GP.2 (Chapter 17.29 42344.5) Supplying & erecting G. with necessary material as per specification no. erected for enclosing PVC armoured cable on wall/pole as per specification No.00 .I.78 232.2. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 11 kV ( E ) XLPE HT cable 3x70 to 120 sq.29 52047.2.2.00 7-6-6 Mtr. with necessary material as per specification No.00 7-6-7 Mtr.00 Each 18791 877. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 22 kV ( E ) XLPE HT cable 3x150 to 185 sq. for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 22 kV ( E ) XLPE HT cable 3x70 to 120 sq. Supplying & laying (including excavation) 15 cm dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms.00 Each 9354 752. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 22 kV ( E ) XLPE HT cable 3x240 to 400 sq.5 124. pipe ‘A’ grade 50 mm dia. with necessary material as per specification No.00 Each 31413 877.00 Each 38989 877.00 Each 51170 877. CB-JT/HT Each 16038 752. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 11 kV ( E ) XLPE HT cable 3x300 to 400 sq. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 33 kV ( E ) XLPE HT cable 3x240 to 400 sq. CWPLB/GP.2 (Chapter 17. with necessary material as per specification No. 114 9. erected for enclosing PVC armoured cable on wall/pole as per specification No. mm.00 Each 17526 877. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 33 kV ( E ) XLPE HT cable 3x120 to 185 sq. with necessary material as per specification No.1 & 4.00 Each 16806 752.64 486. for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).00 Each 21068 877.00 7.00 7-6-2 Mtr.2. with necessary material as per specification No.00 7-6-4 Mtr.29 21945.1 & 4.78 362.71 16791.00 Each 11953 752.00 Each 7734 752. mm. pipe ‘A’ grade 75 mm dia.2 (Chapter 17.71 17559. para 4. mm. with necessary material as per specification No.2 (Chapter 17.71 16311.29 34118.5) Supplying & erecting G. 265 220.02 293. mm. mm. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 33 kV ( E ) XLPE HT cable 3x70 to 95 sq mm with necessary material as per specification No.6 Cable Enclosures (CE) 7-6-1 Supplying & erecting G.5) Supplying & laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface. 160 133. CWPLB/GP.64 581. mm. CB-JT/HT Providing and erecting Heat shrinkable Straight through joint kit for 22 kV ( E ) XLPE HT cable 3x300 to 400 sq. mm. pipe ‘A’ grade 25 mm dia. CB-JT/HT Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 400 sq.00 7-6-5 Mtr. mm with necessary material as per specification No. for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). to required depth complete. Each 20 7.69 356.69 556.39 27. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 185 sq mm for PVC armoured cable as per specification No.69 405.2. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 150 sq mm for PVC armoured cablen as per specification No.00 Mtr.17 70. to required depth complete.I.per meter to the overall rate. 2)All the GI pipes and DWC pipes shall be ISI marked. If DWC pipe for length of more than 25m is to be used depending on environmental condition . complete as per specification No.00 Mtr.mm. to required depth complete. Supplying and laying (including excavation) 175 mm outside dia. 229 145. para 4.62 98. 442 145. for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). CB-GL Supplying & erecting Siemens type brass cable glands for 4 core 35 Sq.00 307. for PVC armoured cable as per specification no. Mtr. to required depth complete. approval should be taken from concerned Superintending Engineer 4) For running the cable across the field / along the road . to required depth complete.69 408.62 30. below road / ground surface. pipe ‘B’ grade for enclosing cable below ground/road surface.00 Mtr.00 7-7-2 Each 27 14.78 42. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 400 sq mm for PVC armoured cable as per specification No. 262 145. 259 145. 114 145. CB-GL Supplying & erecting Siemens type brass cable glands for 4 core 50 sq mm for PVC armoured cable as per specification No.78 40. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 240 sq mm for PVC armoured cable as per specification No. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface. para 4.17 81.3/.2.00 158.00 Mtr. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 70 sq mm for PVC armoured cable as per specification No. 61 145. CB-GL Supplying & erecting Siemens type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm for PVC armoured cable as per specification No. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 120 sq mm for PVC armoured cable as per specification No. 210 145. CB-GL Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for PVC armoured cable as per specification No. to required depth complete. pipe ‘B’ grade for enclosing cable below ground/road surface. 216 133. to required depth complete. CW-PLB/GP. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface.69 207.00 353. to required depth complete.00 7.69 216.00 131.00 Mtr.00 201. complete as per specification No. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface.69 260.3 (Chapter 17.7-6-8 7-6-9 7-6-10 7-6-11 7-6-12 7-6-13 7-6-14 7-6-15 7-6-16 7-6-17 7-6-18 Note :- Supplying & laying (including excavation) 25 cm Dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms.00 7-7-3 Each 48 22. Supplying and laying (including excavation) 160 mm outside dia.00 Mtr. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface./3 core 50 Sq.78 33.5) Providing & laying 75 mm dia G.69 302. it should be covered by half round Hume Pipe only.62 30.00 Mtr.00 114. Supplying and laying (including excavation) 120 mm outside dia.12 49.62 30. 410 145.00 Mtr.00 249. Supplying and laying (including excavation) 200 mm outside dia. 1)For erection of G I pipe on stone wall add Rs.69 588. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface.00 Mtr.7 Cable Glands (GL) 7-7-1 Supplying & erecting Siemens type brass cable glands for 2 to 4 core 2.5) Supplying and laying (including excavation) 50 mm outside dia. Supplying and laying (including excavation) 90 mm outside dia.I. Supplying and laying (including excavation) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface.00 Mtr.00 .00 7-7-5 7-7-6 7-7-7 7-7-8 7-7-9 7-7-10 7-7-11 7-7-12 7-7-13 Note :- Each Each Each Each Each Each Each Each Each 67 83 83 100 127 167 215 267 303 30.62 30. 156 145.00 114.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm for PVC armoured cable as per specification No. CB-GL 1) For use of Flange type glands increase overall rate by 50%. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 300 sq mm for PVC armoured cable as per specification No. Supplying and laying (including excavation) 77 mm outside dia.mm. 3) DWC pipe shall be preferably used for the length where possibility of damaging of cable is more. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface.62 33. CB-GL Supplying & erecting Siemens type brass cable glands for 3 1/2 core 95 sq mm for PVC armoured cable as per specification No. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface. 70 145. Providing & laying 50 mm dia G.69 375.00 7-7-4 Each 59 22.02 349.3 (Chapter 17. CW-PLB/GP. CB-CL/CU Each Each Each Each Each Each Each Each Each Each Each Each 9 23 25 32 52 65 89 119 182 265 347 500 5. 7.00 71. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 35 sq mm complete asper specification No.33 6.6 mm (16 gauge) CRCA sheet of size 200 x 150 x 150 mm.39 8. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 300 sq mm complete as per specification No.00 15.28 5.00 600. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 150 sq mm complete as per specification No.28 24.00 28.00 58. CB-SB Supplying & erecting FRP box of size 250mm x 200mm x 100 mm.8 Street Light Boxes & Cable Indicators (SB) 7-8-1 Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No.00 519.28 681. 2.00 47.28 619.00 7-8-5 7-8-6 7-8-7 7-8-8 7-8-9 7-8-10 Each Each Each Each Each Each 595 717 501 576 496 343 24. CB-SB Supplying & erecting water tight terminal box of cast iron of size 150 x 100 x 100 mm complete on pole as per specification No. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 240 sq mm complete as per specification No.6 mm (16 gauge) CRCA sheet of size 300 x 200 x 150 mm complete on pole as per specification No.33 6.28 24.28 431. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 25 sq mm complete as per specification No. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 95 sq mm complete as per specification No. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 120 sq mm complete as per specification No.00 362.39 9.2) Glands are to be provided at time of joints/repairs.00 197.00 . CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 50 sq mm complete as per specification No.78 14. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 95 sq mm complete as per specification No.00 280. CB-SB Supplying & erecting water tight terminal box of 1.00 525.00 99.33 7. CB-SB Supplying & erecting water tight terminal box of cast iron of size 200 x 150 x 150 mm complete on pole as per specification No. CB-CL/AL Each Each Each Each Each Each Each Each Each Each 3 5 6 9 13 15 21 27 33 57 2. CB-SB Supplying & erecting water tight terminal box of cast iron of size 300 x 200 x 150 mm complete on pole as per specification No..33 6.28 6.00 31.. CB-SB Supplying & erecting FRP box of size 150mm x 125mm x 100 mm.7 mm thick complete on pole as per specification No..28 287.7 mm thick complete on pole as per specification No. CB-SB Each 174 14. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 70 sq mm complete as per specification No.11 2. 2. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 400 sq mm complete as per specification No.28 24.6 mm (16 gauge) CRCA sheet of size 150 x 100 x 100 mm complete on pole as per specification No.11 6.78 14.5 14.00 7-8-4 Each 263 24.10 Cable Lugs (Aluminium) (CL/AL) 7-10-1 7-10-2 7-10-3 7-10-4 7-10-5 7-10-6 7-10-7 7-10-8 7-10-9 7-10-10 Supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete as per specification No.00 741.72 13.33 6.00 72.9 Cable Lugs (Copper) (CL/CU) 7-9-1 7-9-2 7-9-3 7-9-4 7-9-5 7-9-6 7-9-7 7-9-8 7-9-9 7-9-10 7-9-11 7-9-12 Supplying & erecting crimping type copper lugs for cable upto 16 sq mm complete as per specification No.45 13. CBCIP Supplying & erecting water tight terminal box of 1.00 7.78 19 14.7 mm thick complete on pole as per specification No. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 150 sq mm complete as per specification No. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 240 sq mm complete as per specification No.00 38. 2.72 5.28 24.33 7.78 14.00 520.00 19.00 7-8-3 Each 657 24. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 185 sq mm complete as per specification No.00 7-8-2 Each 407 24.00 134. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 50 sq mm complete as per specification No.00 367. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 25 sq mm complete as per specification No.00 7.00 35.33 6.00 28. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 120 sq mm complete as per specification No.78 189. complete on pole as per specification No. CB-SB Supplying & erecting water tight terminal box of 1.28 24. CB-SB Supplying & erecting FRP box of size 300mm x 200mm x 125 mm.00 21.00 12. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 35 sq mm complete as per specification No. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 70 sq mm complete as per specification No. CB-CL/CU Supplying & erecting crimping type copper lugs for cable 185 sq mm complete as per specification No.00 7. 23/.1 mtr) length total 12 m long -.9 mm.00 8-1-11 Mtr.00 Note :8-1-10 Mtr.7 x 114.9 mm. base plate in provided foundation. (weight 175 kq.5x3.75 + 1.3 mm. Supplying and erecting steel tubular swaged pole 165. dia with 4. 696 98.06 24.5 x4.4 kg/m) with provided base plate in provided foundation as per specification No.59 14902.1 x 139.7 + 2.3 mm dia. (14.00 Note :- Chapter : 8 OVER HEAD SYSTEMS (OH) 8.8 + 3.00 8-1-8 Mtr.63 1741.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km.05 11867.1 x 139.9 kg /m) with provided base plate in provided foundation as per specification No.00 138.3 mm dia. 1945 210.00 8-1-13 Mtr.5 x 3. OH-PL/STP Above items shall be used only for street lighting. 1046 146.23 23.5 x 3.7 x 114.00 35.) as per specification No.1 to 7. OH-PL/RSJ Supplying and erecting Rolled steel Joist (Girder) pole 175 x 90 mm (19.74 1381. dia with 4. OH-PL/RSJ Pole as per Item no.00 8-1-6 Each 20742 945.11. Mtr.5 x3. Supplying and erecting Rolled steel Joist (Girder) pole 100 x 116 mm (23 kg/m) with provided base plate in provided foundation as per specification No. OH-PL/STP Supplying and erecting steel tubular swaged pole 139. base plate in provided foundation (weight 113 kg.1 x 139. (weight 208 kg.08 2155. with 5. 1577 163. CB-CL/AL Lugs are to be provided at time of joints/repairs. 8-1-9 shall only be used as Intermediate Pole.5 x 4.3 x 88.25 mm thickness (5 + 2 + 2 m) length respectively and total 9m long with pole cap.7-10-11 7-10-12 Note :- Supplying & erecting crimping type aluminium lugs for cable 300 sq mm complete as per specification No.65 mm.65 mm.00 7. thickness (5 + 2.76 kg/m) with provided base plate in provided foundation as per specification No.1 + 3. 1)The rates for item no 7. OHPL/STP Supplying and erecting Rolled steel Joist (Girder) pole 150 x 80 mm. 2)Item No 7.00 8-1-7 Mtr.11.do --.60 + 2. 8-1-11 shall only be used as Intermediate Pole. OH-PL/RSJ Supplying and erecting Rail pole (29.00 8-1-5 Each 14208 693.00 Note :8-1-12 Mtr.do --.5 x 4.7 x 114.65 mm thickness (5.18 794.5 m long with pole cap. 1356 146.11.91 21688.(weight 109 kg. Each Each 80 115 23.75 mtr) length respectively and total 8.5x3.7 m) length total 11 m long -.do --.) as per specification No. Mtr.7 x 114. 822 98.96 13514.00 Note :8-1-3 Each 14765 533.18 920.5 x 3.1 Steel Poles (OH-PL) 8-1-1 Supplying and erecting steel tubular swaged pole 139. (25. with 4. Mtr.3 mm dia with 4.7 x 114. OH-PL/RSJ Supplying and erecting Rolled steel Joist (Girder) pole 125 x 75 mm (12.5 m) length respectively and total 10 m long -. OH-PL/RLP Each 11063 401. cable end box including refilling the trench up to ground level and making coils complete. 0 15 0 20.3 shall be used only when the cost of dismantled cable is more than Rs. Supplying and erecting Rolled steel Joist (Girder) pole 152 x 152 mm (37kg/m) with provided base plate in provided foundation as per specification No. complete Dismantling the existing underground cable without damaging it with glands.do --.00 24.06 20.7 x 114.65x3.65x3. between site and section office.(weight 157/160 kg) as per specification No.13 15298.3 kg/m) with provided base plate in provided foundation as per specification No.00 Note :8-1-4 Each 12984 529. OH-PL/STP These item shall be used only for L T O H line./150 x75 mm.00 8-1-9 Mtr. 1234 146.23 103. thickness (5.28 20.11 Dismantling 7-11-1 7-11-2 7-11-3 Dismantling the existing cables of all types & sizes Refilling the holes for dismantled cables with cement mortar & finishing in an aproved manner etc. CB-CL/AL Supplying & erecting crimping type aluminium lugs for cable 400 sq mm complete as per specification No.) as per specification No. Supplying and erecting steel tubular swaged pole 165. OH-PL/STP Supplying and erecting steel tubular swaged pole 165. OH-PL/RSJ Pole as per Item no. dia with 4.per meter.1 x 139. (weight 147 kg) as per specification No.74 1503.3 x 88.65 mm thickness ( 5 + 2 + 2 m ) length respectively and total 9 Mtr long -.5 + 2.00 8-1-2 Each 11468 399. OH-PL/STP Supplying and erecting steel tubular swaged pole 165.25 mm thickness (5 + 1.) as per specification No.74 1193.00 .4 x 4.17 11464. OH-PL/RSJ Supplying and erecting Rolled steel Joist (Girder) pole 200 x 100 mm.42 kg/m) with provided base plate in provided foundation as per specification No. 00 8-2-15 Each 2979 145.00 8-2-3 8-2-4 8-2-5 8-2-6 8-2-7 8-2-8 Each Each Each Each Each Each 11987 1066.65 mm thickness (5. C.5 x 3.00 Each 3357 215.7 x 114.69 9932. pipe pole ‘B’ grade 75/80 mm dia 6 m long with pole cap.26 62755.26 29230. OH-PL/GIP Supplying and erecting M. Bracket includes cap .59 14090. base plate in provided foundation as per specification No. pipe pole ‘B’ grade 75/80 mm dia 6 m long with pole cap. OH-PL/PSC Spun Poles Deleted Deleted Deleted Deleted Deleted GRP Poles Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in square ( top and bottom dia 75 mm ) / conical ( top dia 76mm and bottom dia 143 mm) shape and thickness 6 mm having height 4 m designed to withstand wind load upto 180 km/ hr as per specification No.00 Each 13453 636. also the base plate should be taken separately for each pole Supplying and erecting ISI mark G. OHPL/GIP Supplying and erecting steel tubular swaged type welded pole with upper portion hydraulically bent swan neck.) total length 10 m long with base plate in provided foundation.00 8-2-16 Each 8679 145. foundation & muffing (square/round) as per specification No.1 x 139.I.OH-PL/GRP Supplying & erecting internal junction box (small) GRP suitable for providing MCB / HRC Fuse for conical / square GRP Poles for pole upto 6 mtrs in height as per specification No. with 4. C.OH-PL/GRP Supplying & erecting double arm bracket (GRP) with length 1000 mm and 48 mm dia for each arm having height 280 mm suitable for conical / square GRP Poles.OH-PL/GRP Supplying & erecting internal junction box (big) GRP suitable for providing MCB / HRC Fuse for conical / square GRP Poles for pole above 6 mtrs in height as per specification No.3 mm dia.1 x 139.00 8-2-12 Each 61689 1066.6 + 2.00 8.OH-PL/GRP Each 1825 730.OH-PL/GRP Supplying & erecting single arm bracket (GRP) with length 1000 mm and 48 mm dia having height 280 mm suitable for conical / square GRP Poles.69 3125.(weight 156. OH-PL/STP Supplying and erecting steel tubular swaged type welded pole with upper portion bent swan neck.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical (top dia 76mm and bottom dia 260 mm) shape and thickness 6 mm having height 11 m designed to withstand wind load upto 180 km/ hr as per specification No.3 mm dia with 4. base plate in provided foundation as per specification No.arms for fitting and connecting part in GRP moulded case and easy to insert on pole top and fitting with necessary hardware as per specification No.65 mm thickness (5 + 2 + 3 m) respectively (net vertical height 9 m.00 8-2-2 Each 2502 1066.84 30147.00 .36 3572. Bracket includes cap .(weight 175 kg) as per specification No.69 6528.69 8825.7 + 2.5 x 4.00 Each 14665 15481.26 3568.5 x 4.00 8-2-14 Each 9786 145.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical (top dia 76mm and bottom dia 227 mm) shape and thickness 6 mm having height 9 m designed to withstand wind load upto 180 km/ hr as per specification No. foundation & muffing (square/round) as per specification No.00 8-2-9 Each 16376 1066.26 17442.75 kg) as per specification No.7 m) respectively total 11 m long long with base plate in provided foundation. Necessary arrangement for earthing shall be provided.arms for fitting and connecting part in GRP moulded case and easy to insert on pole top and fitting with necessary hardware as per specification No.2 PSC / Spun / GRP Poles (OH-PSC/ SPN / GRP) PSC Poles 8-2-1 Supplying and erecting PSC rectangular pole of top 90 x 102 / 105 mm & bottom of 90 x 275 mm 8 m long (345 kg) complete erected in provided C.7 x 114.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical (top dia 76mm and bottom dia 293 mm) shape and thickness 10 mm having height 13 m designed to withstand wind load upto 180 km/ hr as per specification No.OH-PL/GRP Supplying and erecting glass reinforced polymer composit (GRP) with high impact strength in conical ( top dia 76mm and bottom dia 176 mm) shape and thickness 6 mm having height 6 m designed to withstand wind load upto 180 km/ hr as per specification No.00 8-2-11 Each 45921 1066. OH-PL/PSC Supplying and erecting PSC rectangular pole of top 105 x 115 mm & bottom of 105 x 315 mm 9 m long (510 kg complete erected in provided C.00 8-2-10 Each 28164 1066. 165.54 2556.36 4003.26 46987. 165.00 8-2-13 Each 6382 145.50 x 3.26 13053.S.OH-PL/STP Each 3788 215.Note :- 8-1-14 8-1-15 8-1-16 8-1-17 As per contour of the site and position of different obstacles/layout the length of RSJ pole to be considered for each pole and the measurement sheet should be attached in estimate/bill. 2) Above brackets are suitable for OCTAGONAL/CONICAL Poles from 3 to 12 m in length. as per specification No. OH-PL/PSC Providing & erecting 7 m high galvanised OCTAGONAL pole with bottom of 130 mm A/F. 269195 51783 320978.41 11126.00 .75 2145.53 29148. OH-PL/PSC Providing & erecting 12 m high galvanised OCTAGONAL pole with bottom of 240 mm A/F. with all hardware on provided pole.69 10276.5m High-Mast Pole weight 240 kg on provided foundation as per specification No. OH-PL/PSC Providing & erecting Sword type bracket with double arm. OH-PL/PSC Hot Dipped Galvanized CONICAL Poles Set. Bracket height is 750 mm and pitch circle dia 550 mm as per specification No.8-2-17 Supplying & erecting base bracket (GRP) with necessary SS 304 hardware to hold the two compartments of GRP base brackets and 8 nos 16 mm long foundation nut bolts (EN-8) on provided foundation suitable for conical / square GRP poles. 46626 178812 13137. OH-PL/HM Supplying and erecting 20 m High Mast with lowering and raising motorized unit. top 70 mm A/F on provided foundation as per specification No.13 35947 59763.8 Luminaries and its control gear box. OH-PL/PSC Providing & erecting 5 m high galvanised OCTAGONAL pole with bottom of 130 mm A/F. OH-PL/PSC Providing & erecting 8 m high galvanised OCTAGONAL pole with bottom of 135 mm A/F.41 12840.53 24284.29 5877.00 8-3-17 (New) 8-3-18 (New) 8-3-19 (New) Each 16641 1524.00 Each 27318 1829.00 Each 3767 184.8 Luminaries and its control gear box.00 8-3-4 Set. as per specification No. with carriage assembly for 6 . top 70 mm A/F on provided foundation as per specification No.00 8-3-13 (New) Each 8686 915. Hot Dipped Galvanized OCTAGONAL Poles Providing & erecting 3 m high galvanised OCTAGONAL pole with bottom of 130 mm A/F.43 18165.00 Each 22454 1829. top 70 mm A/F on provided foundation as per specification No. top 70 mm A/F on provided foundation as per specification No. 1000 mm in length. top 70 mm A/F on provided foundation as per specification No. Set. OH-PL/PSC Providing & erecting 11 m high galvanised OCTAGONAL pole with bottom of 210 mm A/F. lighting stand and avaition light (excluding Luminaries) on provided foundation as per specification No.8 Luminaries and its control gear box. lighting stand and avaition light (excluding Luminaries) on provided foundation as per specification No. OH-PL/HM Supplying and erecting 16 m High Mast with lowering and raising motorized unit. 1000 mm in length.29 9601.00 8-3-6 8-3-7 8-3-8 (New) 8-3-9 (New) Note :- Each 1960 184.43 15385. OHPL/PSC 1) For bracket length of 1500 mm (Single/Double arm) increase overall rates by 20 %.00 8-3-11 (New) Each 6140 915.00 214759.00 8-3-14 (New) Each 9754 1372. top 70 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 6 m high galvanised OCTAGONAL pole with bottom of 130 mm A/F. 219348 46505 265853. OH-PL/PSC Providing & erecting 4 m high galvanised OCTAGONAL pole with bottom of 130 mm A/F.00 8-3-10 (New) Each 4962 915.29 7055.00 8-3-15 (New) Each 11468 1372. top 70 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 9 m high galvanised OCTAGONAL pole with bottom of 155 mm A/F. top 70 mm A/F on provided foundation as per specification No. OH-PL/HM Supplying and erecting 12. OH-PL/HM Deleted Deleted Sword type Brackets Providing & erecting Sword type bracket with single arm.00 8-3-12 (New) Each 7285 915.00 8-3-5 Set. top 90 mm A/F on provided foundation as per specification No.00 Note :- 8. lighting stand and avaition light (excluding Luminaries) on provided foundation as per specification No. with all hardware on provided pole. with carriage assembly for 6 .29 8200.3 Hot Dipped Galvanized Poles & High Mast (HM) 8-3-1 8-3-3 Providing and erecting 12.5 m High Mast with lowering and raising motorized unit. with carriage assembly for 6 . OH-PL/PSC Providing & erecting 10 m high galvanised OCTAGONAL pole with bottom of 175 mm A/F.OH-PL/GRP GRP Poles shall be used only in highly corrosive and costal area Each 10130 145.75 3952. top 90 mm A/F on provided foundation as per specification No.00 8-3-16 (New) Each 13861 1524. OH-PL/BKT Supplying and erecting M. OH-PL/PSC Providing & erecting 6 m high galvanised CONICAL pole with bottom of 140 to 160 mm A/F. complete as per specification No. pole bracket.S. complete as per specification No. top 65 to 75 mm A/F on provided foundation as per specification No.S pole bracket fabricated from angle iron 65x65x6 mm and 1100 mm long for 4 insulators complete as per specification No Supplying and erecting pole bracket.53 44002.12 409. and 550 mm long for vertical guarding for 2 insulators. OH-PL/BKT Supplying and erecting MS pole bracket. complete as per specification No.12 664.12 507. 550 mm long for two insulators and welded with extension channel pieces of same size 300 mm.29 10864. fabricated from ISMC Channel 75x40x 6. complete as per specification No.41 23839.00 8-4-10 Each 871 59. in length. complete as per specification No. OH-PL/PSC Each 7585 915.00 8-3-22 (New) Each 12642 915. complete as per specification No.12 641. top 65 to 75 mm A/F on provided foundation as per specification No. 75x40x6.8 mm channel. OH-PL/BKT For distance exceeding 2.00 8-4-2 Each 479 59.00 Each 42172 1829.00 8-3-21 (New) Each 9949 915. OH-PL/PSC Providing & erecting 9 m high galvanised CONICAL pole with bottom of 173 to 200 mm A/F.4 m between two pole structure add Rs.00 8-4-7 Each 347 59.OH-PL/BKT Supplying and erecting pole bracket. top 65 to 75 mm A/F on provided foundation as per specification No.4 Brackets (BKT) 8-4-1 Supplying and erecting MS pole bracket.12 930.7 mm thick web and 7.29 13557. fabricated from ISMC channel.8 mm and 1100 mm long for vertical guarding for 5 insulators.5 mm thick flange channel iron cross arm for 2. in length. 840/per meter for extra channel length. OH-PL/PSC Providing & erecting 7 m high galvanised CONICAL pole with bottom of 151 to 175 mm A/F.00 8-3-23 (New) Each 15846 915. top 80 to 96 mm A/F on provided foundation as per specification No.29 8500.29 16761. top 65 to 75 mm A/F on provided foundation as per specification No.12 538. fabricated from ISMC channel.00 8-4-5 Each 280 59. OH-PL/PSC Providing & erecting 12 m high galvanised CONICAL pole with bottom of 228 to 260 mm A/F. OH-PL/BKT Supplying and erecting pole bracket.12 339.43 31008. OH-PL/PSC Providing & erecting 11 m high galvanised CONICAL pole with bottom of 206 to 245 mm A/F.00 Note :- . fabricated from ISMC channel.8 mm channel 1100mm long for 4 insulators. top 65 to 75 mm A/F on provided foundation as per specification No. fabricated from angle iron 50x50x6 mm and 1100 mm long for horizontal guarding for 4 insulators.8 mm and 550 mm long for vertical guarding for 4 insulators. OH-PL/PSC Providing & erecting 10 m high galvanised CONICAL pole with bottom of 184 to 200 mm A/F. DP.00 8-4-9 Each 605 59. top 65 to 75 mm A/F on provided foundation as per specification No. OH-PL/BKT Supplying and erecting 100 x 50 mm with 4.00 8-4-3 Each 350 59.8-3-20 (New) Providing & erecting 3 m high galvanised CONICAL pole with bottom of 107 to 115 mm A/F.12 406.00 Each 35939 1676. OH-PL/BKT Supplying and erecting MS pole bracket fabricated from angle iron 65x65x6 mm and 550 mm long for 2 insulators complete as per specification No Supplying and erecting M. top 65 to 75 mm A/F on provided foundation as per specification No.41 20585. 75x40x6. OH-PL/BKT Supplying and erecting MS pole bracket.12 337.00 8-3-24 (New) Each 19213 1372. fabricated from ISMC Channel 75x40x 6.4 mtr.12 731.8 mm channel 550mm long for 2 insulators. complete as per specification No. fabricated from angle iron 50x50x6 mm. OH-PL/PSC Providing & erecting 4 m high galvanised CONICAL pole with bottom of 118 to 130 mm A/F.46 1786.00 8-3-27 (New) 8-3-28 (New) 8-3-29 (New) Each 29484 1524.00 8. top 70 to 85 mm A/F on provided foundation as per specification No. OH-PL/PSC Providing & erecting 8 m high galvanised CONICAL pole with bottom of 162 to 190 mm A/F. top 65 to 75 mm A/F on provided foundation as per specification No. 75x40x6.00 8-4-4 Each 672 59.00 8-4-8 Each 582 59.41 27887. 1100 mm long for 4 insulators and welded with extension channel pieces of same size 300 mm.00 8-3-25 (New) Each 22467 1372. complete as per specification No. 75x40x6.00 8-3-26 (New) Each 26515 1372.00 8-4-11 Each 1664 122. fabricated from ISMC channel.complete as per specification No. Each 278 59.8 mm channel.00 8-4-6 Each 448 59. OH-PL/PSC Providing & erecting 5 m high galvanised CONICAL pole with bottom of 129 to 145 mm A/F.OH-PL/BKT Supplying and erecting pole bracket.45 37615. complete as per specification No.00 21424. complete.8-4-12 Supplying and erecting Vee cross arm for erecting Insulators with channel length of 45mm for base of insulator & vertical member of suitable length to maintain clearance of 1200 mm horizontally between two insulators with angle of 60 degree to horizontal and the total vertical height of V cross arm as 460mm.nut bolts.00 1111. complete. wire 8 SWG complete erected for overhead line with proper size of G. OH-CON/ACSR Supplying and erecting hard drawn G. OH-PL/VCA Supplying and erecting Vee cross arm for erecting Insulators with channel length of 45mm for base of insulator & vertical member of suitable length to maintain clearance of 1530 mm horizontally between two insulators with angle of 60 degree to horizontal and the total vertical height of V cross arm as 460mm.8 kg/km) as per specification No. OH-CON/ACSR Supplying and erecting ACSR conductor of size . Km. complete as per specification No. complete as per specification No. OH-INS/DI Supplying and erecting porcelain pin type insulator suitable for 11kV line.68 656.7 kg/km) as per specification No.3 mm thick flange channel with clamp suitable for erection of 11/22 kV pin insulators complete as per specification No. OH-CON/AAC Supplying and erecting all aluminium stranded conductors 7/2.3 kg/km) as per specification No.84 15.00 95388.6/1-4. OH-CON/AAC Supplying and erecting all aluminium stranded conductors 7/2.00 8-5-5 8-5-6 8-5-7 8-5-8 8-5-9 8-5-10 8-5-11 8-5-12 Km.00 8-4-16 Each 586 69.6/1-4. (318. OH-CON/ACSR Supplying and erecting ACSR conductor of size 6/1-3. (squirrel) (85kg/km) as per specification No. Km. welded with MS flat of 80x10mm at centre of cross arm & MS clamp of 80x10 mm at bottom with clamps.00 91. Km. with 4.00 Note :- 8. OH-INS/PN Supplying and erecting porcelain pin type insulator suitable for 33kV line. cross arms are included with clamps.09 mm (Raccon) complete.36 74.96 mm complete.21 mm.64 1812.0 kg/km) as per specification No.washers complete as per specification No.00 33445.complete. Km.complete.I.11 mm. strip. (Ant. nut.78 mm.00 26353. spindle. OH-INS/DI Supplying and erecting porcelain disc type insulator suitable for 22kV line.84 7.00 1979.complete. complete. nuts complete.8 kg/km) as per specification no.00 1301. with suitable G.77kg/km) as per specification No.95 74.12 863.46 1730.00 2658. complete as per specification No. OH-CON/ACSR Supplying and erecting ACSR conductor of size .00 8-4-14 Each 417 59. Supplying and erecting aluminium bobbin with G.00 kg/km) as per specification No.00 8-4-13 Each 1608 122.l.52 1812. strips.95 1666.00 77076. OH-CON/AAC Supplying and erecting all aluminium stranded conductors 7/2.84 15. Km.95 74. nuts and bolts. OH-PL/VCA Supplying and erecting bracket for guarding.l.00 .00 23.21 1160.complete. Supplying and erecting porcelain shackle type LT medium insulator 75x115 mm dia. OH-PL/VCA All the brackets. nuts and bolts. complete.00 61899.3 mm thick flange erected on pole as per specification no. OH-PL/VCA Supplying and erecting 75x40 mm with 4. welded with MS flat of 80x10mm at centre of cross arm & MS clamp of 80x10 mm at bottom with clamps. (lris) (91.l.95 64.72 mm (Dog) complete.5 Conductors (CON) 8-5-1 8-5-2 8-5-3 8-5-4 Supplying and erecting all aluminium stranded conductors 7/1.60 mm.l. Km.95 17043.00 70. OH-INS/DI Supplying and erecting porcelain disc type insulator suitable for 33 kV line complete as per specification No.00 21696. Km.21 1160.84 15.4 mm. (Gnat) (73. 15883 20264 25193 31778 1160. strips.66 mm. Km. OH-INS/PN Each Each Each Each Each Each Each Each Each Each Each 48 75 68 54 16 1086 1764 2443 247 814 1036 15.46 1151. with G.nut bolts. made from channel iron 1600 mm in length and 65 x 65 x 6mm thick web and 7.24 2549. OH-INS/PN Supplying and erecting porcelain pin type insulator suitable for 22kV line. OHCON/AAC Supplying and erecting all aluminium stranded conductors 7/3.59 mm. washers and nut bolts Each 1029 122.52 557.complete.10 mm.(Mink) (255 kg/km) as per specification No. complete as per specification No. with G. Supplying and erecting porcelain shackle type LT medium insulator 50 x 89 mm dia. made from channel iron 1600 mm in length and 75x40 mm. Km.4 mm thick web and 7. OH-CON/ACSR Supplying and erecting ACSR conductor of size 6/1-3. Km.00 kg/km) as per specification No.6 Insulators (INS) 8-6-1 8-6-2 8-6-3 8-6-4 8-6-5 8-6-6 8-6-7 8-6-8 8-6-9 8-6-10 8-6-11 Supplying and erecting pin type LT medium insulator 100 mm x 62 mm dia. Providing and fixing earthing stud with necessary materials.00 8-4-15 Each 804 59.12 476.00 31536.64 2146.00 42341. Supplying and erecting porcelain disc type insulator suitable for 11kV line.39 215. Km. bolts complete erected.00 9592.21 1666. (Pansy) (115.) (145.3 mm thick flange erected on pole complete as per specification no.00 84.(Rose) (58 kg/km) as per specification No.complete.95 1374. OH-CON/AAC Supplying and erecting ACSR conductor of size 6/1-2.41 41374. OH-CON/ACSR Supplying and erecting ACSR conductor of size 6/1-2. thick web and 7. (Ferret) (171.36 215.00 322.48 mm.36 215. (Weasel) (127.washers complete as per specification No. (394.I. 39707 20029 30161 40528 60086 74930 92838 9035 1666. OH-PL/VCA Supplying and erecting bracket for guarding. wire for binding with jumpering etc.00 8.00 889. fly stay set for pole including straining screw. G. on provided cross arm as per specification No. bolts and nuts painted with one coat of red oxide and two coats of aluminium paint. section on each side.8 Dismantling . Supplying and erecting pipe post made from ISI mark G.8 m length and pole clamps duly erected in provided cement concrete foundation. line with 8 SWG G. stay rod 20 mm x 1. nuts and bolts etc.l.28 128. G. G. Supplying and erecting G. G. stay rod 20 mm x 1. pipe 25 mm dia 3 m overall length.l.00 2271. dia fixed at position.8 m long.I.00 39.89 315.08 1311. nuts and bolts etc. post complete erected with 15 mm bolts and nuts. wire for 75 mm section on either side.84 85. Supplying and fixing MS pole cap fabricated from MS pipe or cast iron fixed to pole by means of set screws and 75 mm deep. Supplying and erecting fibre/ PVC spacers for L. post complete erected with 15 mm bolts and nuts. . duly painted with two coats of aluminium paint complete. Supplying and erecting G.89 24.O.95 155.28 124. Supplying and fixing MS base plate 30x30x0.00 8-7-14 Each 100 24. 22 kV thyrite type lightening arresters. straining screws.T.6 cm size fixed to the pole base either by welding or by set screws 12 mm. complete erected on provided RSJ pole. made of 50 x 6 mm MS flat. G. 7/10 SWG (for to 15mtr.00 8-7-7 Each 845 85. OH-INS/PST Supplying and erecting porcelain post type insulator suitable for 22kV line.84 16.T.l.00 8-7-15 8-7-16 8-7-17 8-7-18 Each Each Each Each 291 100 89 22 24.28 24.00 8-7-2 Each 1474 172. complete erected with MS flat welded MS bolts 15 cm long duly grouted in wall with necessary clamps. OH-INS/LA Supplying and erecting Distribution class. thick fixed to pole by set screws or welded and fixed at position.T. pipe 40 mm dia 3 m overall length. erected with pole clamps along with angle iron bracket of 50 x 50 x 6 mm and one meter long fixed to pole at suitable height with suitable MS clamps duly erected in provided C. OH-INS/PST Supplying and erecting Distribution class. complete. OH-INS/LA Each Each Each Each Each 766 1480 2196 2961 5922 74. including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm. wire to protect the H.00 124. stay wire 7/10 SWG. complete.00 1555.28 68.08 1399. Rs.per m for extra length beyond 15 m) Supplying and erecting G. duly painted with two coats of aluminium paint complete.08 1646. cement plastering etc. stay wire.00 8.95 74. 25/.00 8-7-9 8-7-10 Each Each 51 104 16. stay rod 20 mm x 1. complete erected with MS flat welded MS bolts 15 cm long duly grouted in wall with necessary clamps. over head line of horizontal formation complete erected with 20 SWG G.28 87.l. stay set for poles. overhead line 3 to 5 conductors complete erected. round bended.8-6-12 8-6-13 8-6-14 8-6-15 8-6-16 Supplying and erecting porcelain post type insulator suitable for 11kV line. fixed to pipe at the top & bottom.00 6077.T. wire as binding wire and 50 mm.00 8-7-4 Each 1139 172. wall hook.51 60.C. straining screws. 8 SWG for L. wire No.19 841. complete as per specification No.l.l.l. G.00 8-7-5 8-7-6 Each Each 44 1128 15.28 15.19 155. bolts and nut fixed to steel tubular pole duly painted with one coat of red oxide and two coats of aluminium paint. stay set for poles. including anchor plate 300x 300 x 6 mm. Supplying and erecting guarding loop using G. Supplying and erecting pole clamp made from 50 x 10 mm MS flat for pole or pipe. straining screw. stay wire 7/10 SWG.59 1368.complete as per specification No. Supplying and erecting G. complete as per specification No.I.l.00 8-7-8 Each 19 16. stay wire 7/8 SWG.l.95 74.l. fabricated from 50 x 6 mm MS flat with 15 mm dia. including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm.00 8-7-11 Each 153 24. Supplying and erecting half clamps for pole made from 50 x 6 mm flat for fixing cross arms by means of 15 mm dia.00 8.l.00 3116. over head line with binding wire of 20 SWG G. Supplying and erecting guarding lace for H.00 105. 11 kV thyrite type lightening arrester.00 8-7-12 Each 104 24. with two bends.H.00 128. with two bends. (Add.00 8-7-13 Each 63 24. OH-INS/PST Supplying and erecting porcelain post type insulator suitable for 33kV line. round bended.00 1214. 10 to 15 mm dia and overall length 250 mm including grouting.7 Accessories 8-7-1 Supplying and erecting G. on provided cross arm as per specification No.89 36. Supplying and erecting ‘D’ type pole clamps.28 177. complete duly painted with one coat of red oxide and two coats of aluminium paint. loop-insulator. complete duly painted with one coat of red oxide and two coats of aluminium paint.00 8-7-3 Each 1110 257. bolts and nuts painted with one coat of red oxide and two coats of aluminium paint.8 m length and pole clamps duly erected in provided cement concrete foundation. Each 1227 172.l.. Supplying and fixing MS round base plate 25 cm dia meter and 10mm. long) with pole clamp. Supplying and erecting half clamps for pole made from 50 x 10 mm flat for fixing cross arms by means of 15 mm dia. fixed to pipe at the top & bottom.51 931. G.l.I.l. self stay set for pole. Supplying and erecting pole clamp made from 50 x 6 mm MS flat for pole or pipe..l. Supplying and erecting pipe post made from ISI mark G. foundations. testing & recording the results as per specification No. pipe or 20 mm dia.00 9-2-3 Kg.06 618.per bag including of tax.r. However those who require more than 1 bag TEREC+ compound w. as per specification No (EA-EP). insulators. insulator complete from DP structure in an approved manner Each 0 395.00 Each 0 558.3 Lightning Arrester and Accessories (EA-LAP) 9-3-1 Deleted . Dismantling the existing pole above 6 m height with brackets.06 91. 9-1-6. wires of all sizes without damaging & making the coils in suitable sizes.00 Chapter : 9 EARTHING (EA) 9.2 Accessories 9-2-1 Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required.315 cms. 71 20. TEREC+ compound is made in item no.00 9-1-2 Each 2805 357.06 333. testing & recording the results as per specification No.00 Note :- 9. Kg.06 100. Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. 313 20.01 605.88 3163. EA-EP Supplying and erecting Copper earth plate size 30 x 30 x 0.l.l. stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.75 798.00 Each 11993 640. testing & recording the results .28 59. Each 1656 315. EAEP Supplying and erecting Mobilised Earth for mobile earthing made of SS304 L and 250 micro molecularly bonded copper as per specification No EAMOBI Supplying and erecting Copper earth plate size 60 x 60 x 0.6 cms.Pipe type Earthing (EA-EP) 9-1-1 Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP).l. as per specification No (EA-EP). 548 57.t.12 801. with funnel with a wire mesh for watering and brick masonry block C. EA-EP Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0. with funnel with a wire mesh for watering and brick masonry block C.l.47 558. Dismantling existing lightning arrestor set.00 59. dia. Rod complete with all materials as per specification No. earth wire 14 to 6 SWG complete erected on wall with necessary clamps in an approved manner for earthing or any other purposes with copper lugs cable sockets of 30A & more at each end with necessary cadmium plated double nut & bolts with washers & covering it with bituminous compound.65 2231. Supplying and erecting G.00 9-1-6 (New) 9-1-7 (New) Each 13449 182. One earth pit require one bag of 5 kg of the TEREC+ compound.00 9. clamps.00 9-2-4 Kg. 598 20.6 cm complete with all materials. soil resistivity shall be paid separately @of Rs. Dismantling the existing overhead line including G.00 9-1-4 9-1-5 Each 613 184.89 396.1 Plate. 4830/. cover with TEREC+ maintenance free ground enhancing compound instead of using combination of salt and charcoal complete with all materials.65 1972. insulators. stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.00 9-2-5 Kg. G. 80 20.I. G.00 9-2-2 Kg.00 9-1-3 Each 1915 315. 3) Item No 9-1-5 shall be used for only for temporary installation 4) Provision of 1 bag of 5 kg. Supplying and erecting G. EA-EP Deleted Supplying and erecting pipe type earthing with 40mm. complete with all materials.8-8-1 8-8-2 8-8-3 8-8-4 Dismantling the existing pole up to 6 m height with brackets. clamps.I. Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.64 13632.00 km job 0 0 801. cover complete with all materials.Requirement of no of bags shall be decided wirh respect to soil resistivity as per specification no ESE -LA 1) Resistivity of the soil shall be checked and no of Terrc Compound bags shall be used as per guidelines elaborated in specification 2)Additional GI / Copper wire from earth pit to installation to be provided separately.l. testing & recording the results as per specification No.81 12634.6 cms. ) as per specification No SSTR.5% .3 phase. copper wound transformer with delta conn. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.81 450101.00 10-1-5 Each 360928 2270. on HV side & star connection on LV side with additional neutral brought out on load side. Supplying and Erecting approved make 160kVA . on HV side & star connection on LV side with additional neutral brought out on load side.2.433kV with HV tapping of +/.) as per specification No SSTR. Each 152336 1789. Supplying and Erecting approved make 250kVA . voltage rating 11 / 0.) as per specification No SSTR.81 609279.81 275489.5% . copper wound transformer with delta conn.00 . Supplying and Erecting approved make 100 kVA . copper wound transformer with delta connected.5% .2. voltage rating 11 / 0.9-3-2 9-3-3 Note :- Deleted Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos.) as per specification No SSTR.) as per specification No SSTR.2400 watts at full load as per IS 2026.433kV with HV tapping of +/.00 10-1-4 Each 311759 2270. 4200 watts at full load as per IS 2026.00 10-1-2 Each 191948 1789. copper wound transformer with delta conn.5% . voltage rating 11/ 0.3 phase.5% . on HV side & star connection on LV side with additional neutral brought out on load side. copper wound transformer with delta conn. copper wound transformer with delta conn.5% . on HV side & star connection on LV side with additional neutral brought out on load side. voltage rating 11 / 0.433 kV with HV tapping of +/.41 193737.2.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 400 watts at no load. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. copper wound transformer with delta conn.5% .5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 750 watts at no load. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.433kV with HV tapping of +/.3 phase.TR.00 10-1-3 Each 273218 2270.00 10-1-6 Each 447830 2270. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner For small buildings (one / two storeyed in the hilly and lightning prone area conventional type lightning conductor of item no 9-3-2 shall only be used Each 2296 184.00 Chapter : 10 SUB STATION (SS) 10. Supplying and Erecting approved make 315kVA . 3000 watts at full load as per IS 2026. voltage rating 11/ 0.2.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 550 watts at no load. 1800 watts at full load as per IS 2026. 1250 watts at full load as per IS 2026.433kV with HV tapping of +/.3 phase.41 154125.1 Transformers (TR) 10-1-1 Supplying and Erecting approved make 63 kVA . Supplying and Erecting approved make 500 kVA .2. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. on HV side & star connection on LV side with additional neutral brought out on load side.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 580 watts at no load. voltage rating 11 / 0.2.81 314030.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 500 watts at no load. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. 3600 watts at full load as per IS 2026.3 phase.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 220 watts at no load. voltage rating 11/ 0. on HV side & star connection on LV side with additional neutral brought out on load side.2.3 phase. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.) as per specification No SSTR.75 2481.00 10-1-7 Each 607008 2270.3 phase.433kV with HV tapping of +/.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 155 watts at no load.81 363199.) as per specification No SS. on HV side & star connection on LV side with additional neutral brought out on load side. Supplying and Erecting approved make 200kVA . 5800 watts at full load as per IS 2026.433 kV with HV tapping of +/. 2. on HV side & star connection on LV side with additional neutral brought out on load side. on HV side & star connection on LV side with additional neutral brought out on load side.2.3 phase.5% . on HV side & star connection on LV side with additional neutral brought out on load side. copper wound transformer with delta conn.5% .) as per specification No SS. 1766 watts at full load as per IS 2026. Supplying and Erecting approved make 63 kVA . 3584 watts at full load as per IS 2026.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses. voltage rating 11 / 0.00 Note :- . voltage rating 22 / 0.5% . 10-1-1 & 10-1-2 reduce the material rate by 5% for transformer without of load tap changer. voltage rating 22 / 0.433kV with HV tapping of +/.2. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.2.3 phase.00 10-1-15 Each 676157 2270.3 phase. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.00 10-1-13 Each 410250 2270.TR. copper wound transformer with delta conn.TR.5% . 1) For use of Transformer with aluminium winding for 63/100/200 kVA capacity.00 10-1-11 Each 306022 2270.TR.5% .3 phase.81 497742.2.3 phase.TR.00 10-1-10 Each 117013 2270.) as per specification No SSTR. 2540 watts at full load as per IS 2026. voltage rating 22 / 0.5% . copper wound transformer with delta conn. Rates shall be reduced by 15 % from the material rates for Transformer with Copper winding.TR.81 710011.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses 1193 watts at full load as per IS 2026. 4990 watts at full load as per IS 2026.433kV with HV tapping of +/. voltage rating 22 / 0. Supplying and Erecting approved make 200 kVA .TR. copper wound transformer with delta conn. copper wound transformer with delta conn.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses 1717 watts at full load as per IS 2026.433kV with HV tapping of +/.00 10-1-9 Each 167278 2270.) as per specification No SS.kVA .81 359569.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses . Supplying and Erecting approved make 100 kVA . copper wound transformer with delta conn.00 10-1-12 Each 357298 2270.5% .5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 1000 watts at no load. on HV side & star connection on LV side with additional neutral brought out on load side.) as per specification No SS. 7000 watts at full load as per IS 2026. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. voltage rating 22 / 0.433kV with HV tapping of +/. Supplying and Erecting approved make 500kVA .81 678428.) as per specification No SS.3 phase.81 748113. copper wound transformer with delta conn. voltage rating 22 / 0.) as per specification No SS.3 phase.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses .2.433kV with HV tapping of +/.81 119284. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. 2160 watts at full load as per IS 2026. 4200 watts at full load as per IS 2026.433kV with HV tapping of +/.3 phase. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.) as per specification No SS.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses . on HV side & star connection on LV side with additional neutral brought out on load side.10-1-8 Supplying and Erecting approved make 630.) as per specification No SS.) as per specification No SS. Supplying and Erecting approved make 160 kVA . on HV side & star connection on LV side with additional neutral brought out on load side. on HV side & star connection on LV side with additional neutral brought out on load side. on HV side & star connection on LV side with additional neutral brought out on load side. Supplying and Erecting approved make 630 kVA .5 % continuously rated for full load with standard accessories complete with Test Certificate with losses. Each 707740 2270.433kV with HV tapping of +/. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.81 169549.433kV with HV tapping of +/.2.5% .00 10-1-16 Each 745842 2270. (To be used only for Licensee Job).2. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.TR.5% .81 412521. Supplying and Erecting approved make 315kVA .5 % continuously rated for full load with standard accessories complete with Test Certificate with losses .433kV with HV tapping of +/.2.00 10-1-14 Each 495471 2270. copper wound transformer with delta conn. 2) For item No. voltage rating 22 / 0.TR. voltage rating 22 / 0. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. Supplying and Erecting approved make 250 kVA . copper wound transformer with delta conn. on HV side & star connection on LV side with additional neutral brought out on load side.81 308293. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.3 phase. S. body condition etc.) 1)Hiring and maintaining distribution transformer 11/22 kV includes keeping it in working condition with required tools and plant.08 2238.S. LV side. as per specification No SS. voltage rating 11/ 0. erection. (Hiring for 10 days) Hiring and maintaining distribution transformer 11 kV / 22 kV on HV side 415 V on LV side up to 250 to 500 kVA Capacity. (Hiring for 10 days) Hiring and maintaining distribution transformer 11/ 22 kV on HV side 415 V on LV side upto 500 kVA capacity after commissioning. insulation. ratio. disconnecting HV & LV studs. tap changer connections. copper wound transformer with delta conn.2. checking breather.433 kV with HV tapping of +/.(including transportation) Supplying and erecting approved make out door type oil immersed aluminium wound 6350/250v 15 KVA SINGLE PHASE transformer confirming to I. 2026 specification complete with 5 % continuously rated for full load with standard accessories complete with Test Certificate with with first filling of oil having Vector Group.TR.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 770 watts at 50 % loading and 2200 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS.TR Supplying and Erecting BEE approved make Star Rated (3 STAR) 63 kVA .84 76411.00 10-1-27 (New) 404383 2383.10-1-17 Inspection of faulty distribution transformer 11kV / 22kV on HV side.58 9950. carrying out necessary tests before and after charging upto full load to satisfaction. labour etc 2) The above rates for item no 10-1-18 to 10-1-20 are to be implemented whenever there is a transformer required in lieu of faulty transformer and transportation.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 380 watts at 50 % loading and 1250 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS.) and quotation for repairs.00 10-1-23 (New) 75144 1266.433kV with HV tapping of +/. testing etc are to be considered separately Erecting 11kV / 22 kV on HV side 415 V on LV side up to 500 kVA capacity hired/provided transformer on existing plinth / DP structure. (excluding transportation) Hiring and maintaining distribution transformer 11kV / 22 kV on HV side 415 V on LV side up to 63 to 200 kVA Capacity.3 phase.3 phase. on HV side & star connection on LV side with additional neutral brought out on load side. making connections on HV & LV side in approved manner.00 Note :- 10-1-21 Job 8555 1394.2.65 210006. copper wound transformer with delta connected.00 10-1-22 (New) 59082 1266.TR.2 Accessories .DYN-11 & first filling of silica gel. and submitting inspection report. resistance.TR Supplying and erecting approved make out door type oil immersed aluminium wound 6350/250v 25 KVA SINGLE PHASE transformer confirming to I.433 kV with HV tapping of +/.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 520 watts at 50 % loading and 1800 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS.00 10.43 0 13462.etc.84 60349.-(STAR) Supplying and Erecting BEE approved make Star Rated (3 STAR) 200kVA .77 381116.77 406767.29 24230. on HV side & star connection on LV side with additional neutral brought out on load side.00 10-1-25 (New) 263109 1907.DYN-11 & first filling of silica gel. copper wound transformer with delta conn. as per specification No SS. (for subsequent 5 days and part thereof.5% . 50 c/s Oil immersed and naturally cooled indoor / outdoor type. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. 2026 specification complete with 5 % continuously rated for full load with standard accessories complete with Test Certificate with with first filling of oil having Vector Group. taking out core along with winding for inspection and carrying out necessary tests on HV.5% .65 265017.2.00 10-1-26 (New) 378732 2383.433kV with HV tapping of +/. voltage rating 11/ 0. 50 c/s Oil immersed and naturally cooled indoor / outdoor type. 50 c/s Oil immersed and naturally cooled indoor / outdoor type.2.TR.3 phase. test reports (oil.00 24230.3 phase. oil. 415 V on LV side upto 500 kVA capacity in workshop in presence of authority by opening top cover.TR.5% .-(STAR) Job 0 2238.-(STAR) Supplying and Erecting BEE approved make Star Rated (3 STAR) 100 kVA .5% . on HV side & star connection on LV side with additional neutral brought out on load side. voltage rating 11 / 0.00 10-1-18 10-1-19 10-1-20 Day Day Day 0 0 472 13462. copper wound transformer with delta conn. tap-changer etc.00 10-1-24 (New) 208098 1907.-(STAR) Supplying and Erecting BEE approved make Star Rated (3 STAR) 160kVA . on HV side & star connection on LV side with additional neutral brought out on load side. voltage rating 11/ 0.00 472.5 % continuously rated for full load with standard accessories complete with Test Certificate with losses below 890 watts at 50 % loading and 2700 Watt at 100 % Loading as per IS 1180 ( Part 1 ) as per specification No SS. 34 80. fabricated from pole clamps of MS Flat 40x5 mm. with drooping spikes 15 cm. suitable for 11/22kV supply with clamps for removing drop out fuses at 6 meters length.92 16290. mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.24 953. made out of 25x3mm.5 m Supplying and erecting copper tubular bus 20mm. 17645 767. 4 pieces each with rain shade with hand grip including earthing chain 1. reduce rate by Rs 120/. fuse element mounted on M.23 6. pipe for operating handle erected on extended square shaft. triple pole switch 200A.79 14620. capacity with 3 post pin type insulator per phase.49 18412. in length. mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.34 122. foundation of 15 x 15 x 40 cm.S. Supplying and erecting hard drawn copper solid wire No. 15685 604. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.00 10-2-2 Set. (use shall be restricted to H.5 m Supplying Heavy duty operating rod.00 2352. Supplying and erecting approved make 22 kV out door type gang operated air break.00 10-2-17 Each 77 25.5 m (Light duty) Supplying Heavy duty operating rod. capacity with 3 post pin type insulator per phase.C.per 100 mm or part thereof for reduction in width of 1200 mm. 33 kV out door type drop out fuse with insulator complete with fuse holders. fuse barrel with metal fitting. angle iron as corner support 0. dia erected to enclose bare conductor wires. sides. 11 kV out door type drop out fuse with insulator complete with fuse holders.34 25.33 0 306. 969 25.7 kg. Supplying and erecting 50 x 50 x 6 mm.00 10-2-13 Each 3476 0 3476. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. fuse barrel with metal fitting.00 10-2-6 Set. Set. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.l.6 mm (16 SWG) thick for the use of high tension over head bus and erected on provided HT insulators with clamps.00 10-2-15 Mtr.00 10-2-7 Set. Supplying and erecting approved make. fuse element mounted on M. fuse element mounted on M. mounted in horizontal position with necessary channels on provided cross arm with adequate length of "C" class G.79 19831.) Supplying and erecting clamps.S. channel with working current of 15 Amps capacity complete erected on provided cross arm.l.10-2-1 Supplying and erecting approved make 11 kV out door type gang operated air break.l.49 25701. capacity with 3 post pin type insulator per phase.00 10-2-14 Each 4122 0 4122. triple pole switch 200A. Supplying and erecting extra thick alkathene pipe 10mm. pipe for operating handle erected on extended square shaft.T. channel with working current of 15 Amps capacity complete erected on provided cross arm.T. capacity with 3 post pin type insulator double stack per phase.S. 22 kV out door type drop out fuse with insulator complete with fuse holders.00 Note :10-2-19 Each 854 99. welded to it and erected on pole. triple pole switch 400A. 24934 767. 4 pieces each with rain shade with hand grip including earthing chain 1. complete duly painted with one coat of red oxide and two coats aluminum paint.5 m away from the fence support fixed at the middle of the fencing frame and the other side in C. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. 19304 526. (weight per meter of bus is about 1. 34184 767.l.00 10-2-16 Each 97 25.00 33.49 34951.34 102. Outer Dia 25 mm & inner dia 20 mm suitable for 11 kV with brass couplings etc for removing drop out fuses at 6 meters length. Each 281 470 570 27 2352 25. 8204 526. triple pole switch 200A. mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G. nuts and bolts complete.0 to 6 SWG complete erected for connections on H.00 495.42 2503.00 10-2-3 Set. pipe for operating handle erected on extended square shaft. Supplying and erecting 22 kV fuse barrel with metal fittings. with brass nuts bolts of suitable dia. Supplying and erecting approved make 11 kV out door type gang operated air break.) Supplying operating rod.00 10-2-18 Each 2306 197. pipe for operating handle erected on extended square shaft.00 650. Supplying and erecting approved make. Supplying and erecting approved make.00 10-2-8 10-2-9 10-2-10 10-2-11 10-2-12 Each Each kg Mtr. Supplying and erecting anticlimbing devices. copper strips to be fixed to tubular bus for connecting the bare copper wire to other equipment. channel with working current of 15 Amps capacity complete erected on provided cross arm. Outer Dia 25 mm & inner dia 20 mm suitable for 22/33 kV with brass couplings etc for removing drop out fuses at 6 m length.00 . dia 1. 4 pieces each with rain shade with hand grip including earthing chain 1. Supplying and erecting approved make 33 kV out door type gang operated air break.00 10-2-5 Set. 14093 526.00 10-2-4 Set.79 8731.34 994. Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in foundation and painted as per specification No SS-AS/FSG For Section less than 1200 mm width. Supplying and erecting 11 kV fuse barrel with metal fittings. fuse barrel with metal fitting. 00 Sqm.00 Each 3340 48.62 31. Capacity Cartridge type conf. on provided stand/ wall hook. flat with nut & bolts grouted in wall complete. 913 1919 4022 0 0 315.00 Kg. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark.65 6349. Supplying shock proof leather Safety Shoes of Electrical grade of standard size as IS :11226. M.00 Sqm. flat with nuts & bolts grouted in wall complete.5 0 0 70.C.P. 14544 duly tested.00 . and painted as per specification no SS-AS/DLD Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.2 KVA 0 20. 10-2-29 ) should be discontinued in new erection.00 4338. Capacity Cartridge type conf. angle iron with cross supports for legs.GI pipe with angle iron supports. 6033 315. dia.10-2-20 10-2-21 10-2-22 10-2-23 10-2-24 10-2-25 10-2-26 10-2-27 10-2-28 10-2-29 10-2-30 10-2-31 10-2-32 Note :- 10-2-33 10-2-34 10-2-35 10-2-36 10-2-37 10-2-38 Supplying and erecting double leaf hinged door each 1500mm in width x 1850 mm in height using B class . gauge bandage.3. 76 5. anti-septic solution (Savlon or similar) etc. Supplying & erecting Carbon Dioxide ( CO2 ) fire extinguisher of 5. Rod grouted in wall to a depth of minimum 15cms. Providing floor mounting stand for keeping 4 Nos. medicine for use on wounds due burn. (6. of FIRE buckets 1500mm in length.P. S. Supplying and erecting Wall hook 225mm projection for keeping fire buckets made out of 15 mm. S.044 meters/kg. Dismantling existing pole mounted Distribution Transformer safely without any damages and storing it in safe place. Each 7445 396.5 / 6. printed in English & Marathi and duly laminated.94 7842. flat with nuts & bolts grouted in wall complete. Supplying and erecting ABC powder type 'Ceasefire' type fire extinguisher as per IS : 13849 of 1 kg capacity with necessary clamp for erection on wall.00 402.5 kg.C. medicated ready to use bandage (Band-aid) adhesive tape for medicinal use. powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M. 4357 315.3 Dismantling 10-3-1 Dismantling the existing Distribution Transformer of any capacity from the plinth / foundation safely without any damages and storing in safe place.). M.S.56 2417.00 48.79 1845.65 913.00 1919. Providing round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G. type Fire Extinguisher 5 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge.00 10. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. scissors. welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint. powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M. chain link wiremesh (jali) complete supported on channel iron. type Fire Extinguisher 10 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge.00 1341 per Pair Each 2368 0 1341.00 435.56 8483.00 10-3-2 Note :- kVA 0 30.00 Each 11057 48.1 & 10.5 50.00 Each 1709 0 1709. thickness as per IS : 5424 and of required length and breadth with good insulation property for 22 kV.65 4673.5 mm thickness upto 11 kV Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class C insulation conforming to IS: 15652 – 2006 having 3mm thickness upto 33 kV As old IS No 5424 -1969 is superseded by IS no 15652-2006 . Supplying and erecting D. firmly fixed on provided angle supports with necessary materials.00 Each 8434 48. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. Supplying and erecting D. Providing printed instruction chart for treating persons suffering from electric shock.00 Each 323 0 323. flat with nut & bolts grouted in wall complete. Sqm. Supplying standard first aid box with necessary antiseptic cream.S.56 11106. Sqm. 900mm in height frame made out of 30x30x4 mm.28 81.3.I. Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness upto 3.00 Each 40 9.00 Sqm. crepe bandage.00 Each Each Each 60 435 402 9.S.00 Each 1773 71. (All above contents shall be of standard makes) Supplying rubber matting of 6 mm thickness as per IS : 5424 and of required length and breadth with good insulation property for 22 kV.5 kg. Provided pair of duly tested rubber hand gloves as per IS :340715 suitable for working on 22kV supply. hence the use of rubber matting ( Item No 10-2-28. M. with necessary test certificate from manufacturer.56 3389. erected in foundation. Supplying rubber matting of 12 mm.06 20.3 kV Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2. Transportation should be given separately as on actual basis for item no 10. obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Each 38334 0 38334. A. 0 197.P.8 p.5 % .The engine with first filling of oil. f.C a totally enclosed air cooled / water cooled multi-cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories.10-3-3 Note :- Dismantling existing DO / AB switch set complete from D.C. indicators connected with suitable wires/cables. f.8 p.obtaining necessary approval from Electrical Inspector as per specification No GEN-DG Supplying. GEN-PG Supplying portable generator set with petrol start and kerosene run engine suitable to give 2000 VA output at 220 +/-13 V A. sound absorbing material.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.00 . f. self excited self regulated.15 368782.00 11-1-5 Each 485526 3697.00 Chapter 11 : GENERATORS (GEN) 11. self excited self regulated.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.00 11-1-4 Each 407654 3697. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 20 kVA output continuous rating. with rated current of 6. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 10 kVA output continuous rating.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. 415V. indicators connected with suitable wires/cables. 3 Phase.The engine with first filling of oil. indicators connected with suitable wires/cables. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 15 kVA output continuous rating. 50c/s 0.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories.diesel etc.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying.diesel etc.00 11-1-2 Each 48836 0 48836.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.0 mtr.switchgears. 415 V.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1. sound absorbing material. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.for Diesel Start / Run for Item No 11-1-2 Supplying.0 m.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. 50c/s 0. 3 Phase.3 are for dismantling and handing over to section office inclusive of transportation upto 25 km.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. The rate for item no 10. GEN-PG Add Rs 2600/. 50c/s 0. Set.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.06 411351. A. structure in an approved manner. between site and section office.00 Note :11-1-3 Each 366050 2732.4 A complete with standard accessories as per specification No.switchgears.4 A complete with standard accessories as per specification No. A.5 % . self excited self regulated.8 p. 3 Phase.42 197.1 Generators (GEN) 11-1-1 Supplying portable generator set with petrol start and kerosene run engine suitable to give 1400 VA output at 220 +/-13 V A.diesel etc. 415 volts.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.5 % . sound absorbing material. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.3.switchgears.0 m The engine with first filling of oil.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.C.06 489223. with rated current of 6. 0 m The engine with first filling of oil.5 kVA output continuous rating. 50c/s 0. self excited self regulated. sound absorbing material. f.05 778544.The engine with first filling of oil.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.00 Each 774108 4436. 415V. 3 Phase.The engine with first filling of oil.switchgears. self excited self regulated.0 m.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.8 p.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying.diesel etc.switchgears.diesel etc. 50c/s 0.diesel etc. sound absorbing material. indicators connected with suitable wires/cables.8 p.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying. 50c/s 0.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 50 kVA output continuous rating.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.0 m The engine with first filling of oil. 50c/s 0.0 m.5 % . 3 Phase. indicators connected with suitable wires/cables. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.obtaining necessary approval from Electrical Inspector as per specification no. indicators connected with suitable wires/cables.8 p. self excited self regulated.8 p.06 578570. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 40 kVA output continuous rating. A. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 25 kVA output continuous rating. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 30 kVA output continuous rating.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying.5 % .Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1. GEN-DG Each 525127 3697.11-1-6 11-1-7 11-1-8 11-1-9 11-1-10 Supplying.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories.diesel etc. indicators connected with suitable wires/cables. 415V. 3 Phase. indicators connected with suitable wires/cables. 415V.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. f.00 . A. 3 Phase. 50c/s 0.00 Each 652400 4436.00 Each 574873 3697.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.switchgears.switchgears.06 528824.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. A. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.8 p.5 % . self excited self regulated.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. self excited self regulated.5 % .The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.5 % . screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 62.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.05 656836. f.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.C a totally enclosed air cooled / water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories.0 m.obtaining necessary approval from Electrical Inspector as per specification no GEN-DG Supplying. 415 V. 3 Phase.05 796717.00 Each 792281 4436.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. A. sound absorbing material. A.switchgears. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. f.The engine with first filling of oil.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1. f. sound absorbing material.diesel etc. sound absorbing material. 415V.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. A. 50c/s 0. indicators connected with suitable wires/cables.obtaining necessary approval from Electrical Inspector as per specification no. 50c/s 0.00 11-1-13 Each 1002143 7521.86 1009665. self excited self regulated.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. self excited self regulated.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. A. sound absorbing material. indicators connected with suitable wires/cables. f.The engine with first filling of oil.switchgears.The engine with first filling of oil.The engine with first filling of oil.0 mtr.switchgears.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1. 415V.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.8 p.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 140 kVA output continuous rating. 3 Phase.5 % . f.diesel etc. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. indicators connected with suitable wires/cables.0 mtr.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.obtaining necessary approval from Electrical Inspector as per specification no.switchgears.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. 415 V. 50c/s 0. A.8 886098.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.5 % . sound absorbing material.obtaining necessary approval from Electrical Inspector as per specification no. sound absorbing material. GEN-DG Supplying. 3 Phase.8 p.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories.00 .The engine with first filling of oil.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. 50c/s 0. GEN-DG Each 801277 6269.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.8 p. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. 415V. 3 Phase.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.8 p.8 p.8 807547.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.00 11-1-15 Each 1287637 7521. sound absorbing material. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.diesel etc.11-1-11 Supplying. sound absorbing material.The engine with first filling of oil. self excited self regulated. 415V. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. f. A. Erecting and Commissioning of Diesel generating set with AMF Panelwith alternator of 125 kVA output continuous rating.switchgears.0 mtr. f. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 100 kVA output continuous rating. Erecting and Commissioning of Diesel generating setwith AMF Panel with alternator of 75 kVA output continuous rating.obtaining necessary approval from Electrical Inspector as per specification no.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. GEN-DG Supplying. GEN-DG Supplying. 3 Phase.obtaining necessary approval from Electrical Inspector as per specification no. indicators connected with suitable wires/cables.5 % . 3 Phase.0 mtr. GEN-DG Supplying. self excited self regulated.diesel etc.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.switchgears.86 1295159. 415V.diesel etc. A.86 1073628.00 11-1-14 Each 1066106 7521.5 % . f.5 kVA output continuous rating. Erecting and Commissioning of Diesel generating set with AMF Panel and with alternator of 82. indicators connected with suitable wires/cables. self excited self regulated.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.5 % .diesel etc.00 11-1-12 Each 879828 6269.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. 50c/s 0. 65 2122253.obtaining necessary approval from Electrical Inspector as per specification no. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. GEN-DG Supplying. indicators connected with suitable wires/cables. 50c/s 0.obtaining necessary approval from Electrical Inspector as per specification no.obtaining necessary approval from Electrical Inspector as per specification no. 3 Phase.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr. GEN-DG Supplying. self excited self regulated. f.The engine with first filling of oil.0 mtr.0 mtr.8 p.98 1402730.8 p.diesel etc. A. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 180 kVA output continuous rating. sound absorbing material.The engine with first filling of oil.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.diesel etc.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. f. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. sound absorbing material.5 % .obtaining necessary approval from Electrical Inspector as per specification no. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 5 kVA output continuous rating.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet.obtaining necessary approval from Electrical Inspector as per specification no. A.00 11-1-18 Each 1691973 9242.switchgears.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. 230V. self excited self regulated. A.The engine with first filling of oil.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. indicators connected with suitable wires/cables. f.The engine with first filling of oil.switchgears. sound absorbing material.6 359529.8 p.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1. f.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.0 mtr.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. indicators connected with suitable wires/cables.00 11-1-17 Each 1569689 9242.5 % . Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 200 kVA output continuous rating.The engine with first filling of oil. A. sound absorbing material.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. 50c/s 0. self excited self regulated.5 % . f.11-1-16 Supplying.5 % .C a totally enclosed water cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 160 kVA output continuous rating. sound absorbing material. 415V. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/. 415V.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.diesel etc.00 11-1-20 Each 357148 2380. 415V.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. GEN-DG Each 1394372 8357. 50c/s 0. Erecting and Commissioning of Diesel generating setwith AMF Panel with alternator of 250 kVA output continuous rating.5 % . self excited self regulated. single Phase.00 . GEN-DG Supplying.0 mtr.65 1578932.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. indicators connected with suitable wires/cables. self excited self regulated.switchgears.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters. GEN-DG Supplying. 50c/s 0. 415V. 3 Phase. indicators connected with suitable wires/cables. 3 Phase. A.switchgears.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1.diesel etc.8 p.C a totally enclosed air cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories.switchgears.65 1701216.diesel etc.00 11-1-19 Each 2113010 9242.8 p. 50c/s 0. 3 Phase. 75 12345.75 11105. 230V.94 17773.8 p.5 HP with discharge 4.11-1-21 Supplying.supply of 0.8Liters per second (LPS) for head of 40 / 64 m and 65 mm suction/ 50 mm delivery pipe of size on provided c c foundation as per specification No.94 22568.C. 230 V. A.supply of 1. 415V.supply of 3 HP with discharge 2 /4.supply of 10 HP with discharge of 9.1 Centrifugal Pumps (CGP) 12-1-1 Supplying and erecting Centrifugal water pump (Monoblock).94 13933.C.switchgears.5 % .foundation as per specification No. foundation as per specification No.C.foundation as per specification No. on provided C.1Liters per second (LPS) for head of 36/52 m and 50 mm suction/ 40 mm delivery pipe on provided c c foundation as per specification No.supply of 5 HP with discharge 2 /4.00 12-1-7 Each 17376 396.supply of 2 HP of specified discharge.C.15 399314. head & size of suction.C.5 HP of specified discharge.6 Liters per second (LPS) for head of 18 / 40 m and 80 mm suction/ 65 mm delivery pipe of size or with discharge 4. 50c/s 0. WP-CGP Supplying and erecting Centrifugal water pump (Monoblock). three phase 50 cycles A. single phase 50 cycles A.1Liters per second (LPS) for head of 8 /26 m and 50 mm suction/ 40 mm delivery pipe.94 17773. WP-CGP Supplying and erecting ISI mark Centrifugal water pump (Monoblock) 415 V. f.5 % for every 300 m above 150 m mean sea level.00 12-1-10 Each 22137 396.6 / 21.C. delivery pipes. three phase 50 cycles A.C.00 Chapter 12 : WATER PUMPS (WP) 12. delivery pipes. three phase 50 cycles A.5 HP of specified discharge. screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/.on provided c c foundation as per specification No. three phase 50 cycles A.supply of 1 HP of specified discharge.C. WP-CGP Supplying and erecting Centrifugal water pump (Monoblock). WP-CGP Supplying and erecting Centrifugal water pump (Monoblock). 230V.C. WP-CGP Supplying and erecting ISI mark Centrifugal water pump (Monoblock) 415V.00 12-1-4 Each 12160 184. single phase 50 cycles A. three phase 50 cycles A. 415V. three phase 50 cycles A.c. GEN-DG 1) DG Set rating for altitudes more than 150 m above mean sea level shall be derated at 3.63 27186.1/19.98 34871. on provided C. WP-CGP Supplying and erecting Centrifugal water pump (Monoblock). delivery pipes.Rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level upto 75 dB at 1. sound absorbing material.diesel etc.supply of 3 HP with discharge of 2 /4.94 22534. 415 V.C. three phase 50 cycles A.00 12-1-2 Each 8719 184.supply of 2 HP with discharge 2.C. WP-CGP Supplying and erecting Centrifugal water pump (Monoblock). WP-CGP Supplying and erecting Centrifugal water pump (Monoblock).00 12-1-5 Each 13536 396.6 Liters per second (LPS) for head of 32 /52 m and 65 mm suction/ 50 mm delivery pipe of size or with discharge of 11. 415 V.foundation as per specification No. on provided C.obtaining necessary approval from Electrical Inspector as per specification no. on provided C.foundation as per specification No. delivery pipes.00 . Erecting and Commissioning of Diesel generating set with AMF Panel with alternator of 10 kVA output continuous rating.3 / 7.00 12-1-8 Each 17376 396. Each 396582 2732.2 Liters per second (LPS) for head of 10/26 mtrs and 65 mm suction/ 50 mm delivery pipe on provided c.C.C.75 8904.9 /9. 415V.The complete set enclosed in Acoustic enclosure made of 18 SWG CRCA Sheet. head & size of suction. WP-CGP Supplying and erecting Centrifugal water pump (Monoblock).foundation as per specification No.0 mtr. 230V. three phase 50 cycles A.1 Liters per second (LPS) for head of 36/52m and 50 mm suction/ 40 mm delivery pipe on provided c c foundation as per specification No.supply of 5 HP with discharge of 5. head & size of suction.C. single phase 50 cycles A. 230 V. WP-CGP Supplying and erecting Centrifugal water pump (Monoblock).5 Liters per second (LPS) for head of 20 /36 m and 65 mm suction/ 50 mm delivery pipe on provided c c foundation as per specification No. indicators connected with suitable wires/cables.00 12-1-12 Each 33829 1041. WP-CGP Each 5638 184. head & size of suction. foundation as per specification No.00 12-1-11 Each 26207 978.9 Liters per second (LPS) for head of 14/36 and 50 mm suction/ 40 mm delivery pipe on provided c.94 17773.00 12-1-6 Each 17376 396.C a totally enclosed air cooled multy cylinder diesel enginedeveloping suitable BHP at 1500 rpm with 10% overload for 1 hour in 24 hours with standard accessories. single Phase.C.Both the engine and alternator direct coupled on a common fabricated steel base plate with anti vibratring pad with control panel comprising of standard meters.C.supply of 7.00 12-1-3 Each 10920 184.c.The engine with first filling of oil.9 Liters per second (LPS) for head of 16/30m and 80 mm suction/ 65 mm delivery pipe of size. self excited self regulated. WP-CGP Supplying and erecting Centrifugal water pump (Monoblock). on provided C.00 12-1-9 Each 22171 396.C.8/8.75 5823.supply of 3 HP with discharge 4. single phase 50 cycles A.2 /4.5/8. 415 V. dia.29 30449. dia.4 Liters per second (LPS) for head of 30 / 54 m and 80 mm suction/ 65 mm delivery pipe of size or with discharge of 17.. WP-CGP 1) Preferably energy efficient motors with p.00 Note :- 12-2-1 12-2-2 12.29 21556.415 V.8 Liters per second (LPS) for head of 18 / 36 m and 100 mm suction/ 100 mm delivery pipe of size.00 12-3-4 Each 24490 1749.C.5 H. and delivery pipe 32 mm.9 shall be used. borewell.00 Note :- 12. and delivery pipe 32 mm. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.supply of 12.5 /19.8 Liters per second (LPS) for head of 18 / 52 m and 100 mm suction/ 80 mm delivery pipe of size on provided c c foundation as per specification No. type clamp as per specification No.P. dia. dia. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. three phase 50 cycles A. borewell suitable for 20 to 80 LPM discharge at 55 to 25 mtr head & (max efficiency at 41 m head & 50 Ipm discharge & delivery pipe of necessary diameter with a necessary H. 415V. multistaged with brass venturi and having suction pipe 40 mm.3 Submersible Pumps for Bore wells (SMP) 12-3-1 Supplying and erecting submersible pumpset of required HP with 415 V.00 12-3-5 Each 25569 1749. with discharge capacity 22/16 LPM for 48/60 m suction head respectively with maximum discharge head of 18 metre complete erected as per specification No. multistaged with brass venturi and having suction pipe 40 mm.5 / 36.P.. WPEJP 1) Preferably energy efficient motors with p.00 12-1-14 Each 44795 1104. borewell. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.5 HP with discharge of 7/ 19.5 Liters per second (LPS) for head of 18 / 30 m and 100 mm suction/ 100 mm delivery pipe of size.29 28175.per 3 meter. on provided c c foundation as per specification No. 50 c/s AC supply suitable for 150 mm dia.29 29629. type clamp as per specification No. (2 Stage) suitable for 200 to 500 LPM discharge at 21 to 11 m head & (max efficiency at 19 m head & 300 Ipm) discharge & delievery pipeline 80 mm dia a necessary H.9 shall be used. 12-2-7 Each 19807 1749. As per specification No.on provided c c foundation as per specification No. 50 c/s AC supply suitable for 150 mm dia.P.00 . type clamp. 50 c/s AC supply suitable for 150 mm dia.5 H. 50 c/s AC supply suitable for 150 mm dia. three phase 50 cycles A.29 26239.C. pressure pipe 32 mm.50/. pressure pipe 32 mm.00 12-2-4 Each 14625 1749.supply of 20 HP with discharge of 14 / 33..00 12-2-3 Each 13521 1749.P. borewell. dia.C.12-1-13 Supplying and erecting ISI mark Centrifugal water pump (Monoblock).f above 0. pressure pipe 32 mm. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.00 12-1-15 Supplying and erecting ISI mark Centrifugal water pump (Monoblock) 415 V. dia.supply of 15 HP with discharge 10. three phase 50 cycles A. 2)For additional depth of each 3 mtrs or part thereof add Rs.29 27318. dia.f above 0. WP-SMP Each 27880 1749.6 discharge/Liters per second (LPS) for head of 20 / 48 mtrs and 80 mm suction/ 65 mm delivery pipe of size or with discharge 20 / 33. dia. type clamp as per specification No. in the rates of item no.98 40957. borewell . multistaged with brass venturi and having suction pipe 40 mm. and delivery pipe 32 mm. type clamp as per specification No. Each 63528 1104.00 12-3-2 Each 28700 1749. with discharge capacity 23/15 LPM for 39/51 m suction head respectively with maximum discharge head of 15 metre complete erected as per specification No. suitable for 100 to 250 LPM discharge at 45 to 24 mtr head & (max efficiency at 38 mtr head & 250 Ipm discharge & delivery pipe of necessary diameter with a necessary H.00 12-3-3 Each 26426 1749. 50 c/s AC supply suitable for 150 mm dia. WP-CGP Supplying and erecting ISI mark Centrifugal water pump (Monoblock).29 15270. suitable for 20 to 80 LPM discharge at 91 to 42 m head & (max efficiency at 68 m head & 50 Ipm) discharge & delivery pipe of necessary diameter with a necessary H.2 Ejecto type Water Pump (EJP) Deleted Supplying and erecting ejecto type water pump 3 phase 2 H.suitable for 70 to 250 LPM discharge at 44 to 24 m head & (max efficiency at 38 m head & 160 Ipm discharge & delivery pipe of necessary diameter with a necessary H. WPCGP Each 39915 1041. 3 H. WPEJP Supplying and erecting ejecto type water pump 3 phase 1. with discharge capacity 23/15 LPM for 39/51 m suction head respectively with maximum discharge head of 15 metre complete erected as per specification no.29 16374. WPEJP Supplying and erecting ejecto type water pump single phase 1. dia.26 64632.26 45899. borewell.00 Each 26240 2995. type clamp as per specification No. 50 c/s AC supply suitable for 150 mm dia. borewell. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. borewell. borewell. suitable for 250 to 700 LPM discharge at 33 to 15 m head & (max efficiency at 24 m head & 500 Ipm discharge & delivery pipe of necessary diameter with a necessary H.02 39040. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. 50 c/s AC supply suitable for 150 mm dia. 50 c/s AC supply suitable for 150 mm dia. type clamp as per specification No. suitable for 300 to 850 LPM discharge at 33 to 10 m head & (max efficiency at 24 m head & 600 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. 50 c/s AC supply suitable for 150 mm dia.02 34643. 50 c/s AC supply suitable for 150 mm dia.00 Each 30601 1749.00 12-3-17 Each 36045 2995. borewell.02 29235. 50 c/s AC supply suitable for 150 mm dia.00 Each 26328 2995. 50 c/s AC supply suitable for 150 mm dia. borewell. As per specification No.02 29814.00 Each 32579 2995. 50 c/s AC supply suitable for 150 mm dia. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. borewell. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. suitable for 300 to 850 LPM discharge at 33 to 10 mtr head & (max efficiency at 33 mtr head & 600 Ipm discharge & necessary diameter delivery pipe line with a necessary H.00 Each 27920 2995.02 35574.02 36199. suitable for 60 to 175 LPM discharge at 113 to 66 m head & (max efficiency at 92 m head & 125 Ipm discharge &delivery pipe of necessary diameter with a necessary H.00 Each 31648 2995. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. type clamp as per specification No.02 42470. suitable for 70 to 250 LPM discharge at 87 to 48 m head & (max efficiency at 76 m head & 160 Ipm discharge & delivery pipe of necessary diameter with a necessary H.00 12-3-19 Each 32653 2995. borewell.00 . 50 c/s AC supply suitable for 150 mm dia. 50 c/s AC supply suitable for 150 mm dia. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. type clamp as per specification No.29 32350. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. borewell. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. type clamp as per specification No. borewell. suitable for 100 to 350 LPM discharge at 56 to 30 m head & (max efficiency at 47 m head & 250 Ipm discharge &delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.12-3-6 12-3-7 12-3-8 12-3-9 12-3-10 12-3-11 12-3-12 12-3-13 12-3-14 12-3-15 Supplying and erecting submersible pumpset of required HP with 415 V.00 Each 26819 2995. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. 50 c/s AC supply suitable for 150 mm dia. borewell. type clamp as per specification No. suitable for 200 to 500 LPM discharge at 52 to 28 m head & (max efficiency at 42 m head & 350 Ipm discharge &delivery pipe of necessary diameter with a necessary H. suitable for 200 to 500 LPM discharge at 42 to 22 m head & (max efficiency at 34 m head & 350 Ipm discharge & delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.02 29323. type clamp as per specification No. borewell. suitable for 20 to 80 LPM discharge at 129 to 59 m head & (max efficiency at 95 m head & 50 Ipm discharge & delivery pipe of necessary diameter with a necessary H. suitable for 100 to 350 LPM discharge at 67 to 36 m head & (max efficiency at 57 m head & 250 Ipm discharge & delivery pipe of necessary diameter with a necessary H.02 30915.00 Each 28588 1749. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.02 37065.00 12-3-18 Each 34070 2995. type clamp.00 12-3-16 Each 30193 2995. WP-SMP Each 26874 1749.02 33188. type clamp as per specification No.29 28623.00 12-3-20 Each 39475 2995. 50 c/s AC supply suitable for 150 mm dia. suitable for 250 to 700 LPM discharge at 44 to 20 m head & (max efficiency at 32 m head & 500 Ipm discharge & delivery pipe of necessary diameter with a necessary H.00 Each 33204 2995. suitable for 20 to 80 LPM discharge at 184 to 84 m head & (max efficiency at 136 m head & 50 Ipm discharge & delivery pipe of necessary diameter with a necessary H. suitable for 70 to 250 LPM discharge at 65 to 36 mtr head & (max efficiency at 57 mtr head & 160 Ipm discharge & delivery pipe of necessary diameterwith a necessary H.02 35648. suitable for 60 to 175 LPM discharge at 97 to 56 m head & (max efficiency at 79 m head & 125 Ipm discharge &delivery pipe of necessary diameter with a necessary H. type clamp. 50 c/s AC supply suitable for 150 mm dia. 50 c/s AC supply suitable for 150 mm dia.29 30337. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. As per specification no. 50 c/s AC supply suitable for 150 mm dia. borewell. borewell. type clamp as per specification No. suitable for 400 to 900 LPM discharge at 20 to 12 m head & (max efficiency at 16 m head & 700 Ipm discharge & delivery pipe of necessary diameter with a necessary H. borewell. 00 Each 37648 2995.efficiency at 34 mtr head & 60 Itr discharge & delivery pipe of necessary diameter) erected with necessary H. borewell. borewell of required HP with. WP-SMP Supplying and erecting submersible pumpset suitable for 150 mm dia. 50 c/s AC supply suitable for 150 mm dia. suitable for 250 to 700 LPM discharge at 55 to 25 m head & (max efficiency at 40 m head & 500 Ipm discharge & delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. borewell. with delievery head from 72 to 20 m and discharge from 10 to 50 Itrs per minute (Max.C.12-3-21 12-3-22 12-3-23 12-3-24 12-3-25 12-3-26 12-3-27 12-3-28 12-3-29 12-3-30 12-3-31 12-3-32 Supplying and erecting submersible pumpset of required HP with 415 V.29 31418.02 45787. WP-SMP Supplying and erecting submersible pumpset suitable for 150 mm dia. suitable for 300 to 850 LPM discharge at 44 to 14 m head & (max efficiency at 32 m head & 600 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No.02 42879. type clamp as per specification No.00 12-3-35 Each 18971 1749. 50 c/s AC supply suitable for 150 mm dia. suitable for 70 to 250 LPM discharge at 153 to 84 m head & (max efficiency at 133 m head & 160 Ipm discharge & delivery pipe of necessary diameter with a necessary H.00 . borewell. type clamp as per specification No.02 45116. type clamp as per specification No.29 20720.. type clamp as per specification No.00 12-3-33 Each 29669 1749.02 42060. suitable for 60 to 175 LPM discharge at 162 to 94 m head & (max efficiency at 132 m head & 125 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No.00 Each 47376 2995. borewell. borewell. borewellof required HP with.00 Each 48793 2995. borewell. 50 c/s AC supply suitable for 150 mm dia.00 Each 39884 2995.00 12-3-34 Each 25322 1749. supply. effciency at 33 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.02 39712. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.29 27071. suitable for 20 to 80 LPM discharge at 258 to 118 m head & (max efficiency at 190 m head & 50 Ipm discharge &delivery pipe of necessary diameter with a necessary H. suitable for 60 to 175 LPM discharge at 146 to 85 m head & (max efficiency at 119 m head & 25 Ipm discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No.02 42060.00 Each 39065 2995. borewell. type clamps as per specification No. type clamp as per specification No. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. 50 c/s AC supply suitable for 150 mm dia. suitable for 400 to 900 LPM discharge at 41 to 25 m head & (max efficiency at 32 m head & 700 Ipm discharge & delivery pipe of necessary diameter with a necessary H.efficiency at 69 m head & 60 Itr discharge & delivery pipe of necessary diameter) erected with necessary H.02 40643. 50 c/s AC supply suitable for 150 mm dia.02 46756. 50 c/s AC supply suitable for 150 mm dia.00 Each 39065 2995. borewell of required HP with 230 V 50 cycles A. borewell of required HP with 230V 50 cycles A. 230V 50 cycles A. type clamp. borewell. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell. 50 c/s AC supply suitable for 150 mm dia. WP-SMP Supplying and erecting submersible pumpset suitable for 150 mm dia. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.02 50371.C. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.00 Each 55576 2995.00 Each 42121 2995. with delievery head from 42 to 20 mtrs and discharge from 30 to 90 Itrs per minute (Max.00 Each 42792 2995. 50 c/s AC supply suitable for 150 mm dia. 50 c/s AC supply suitable for 150 mm dia.02 58571. 50 c/s AC supply suitable for 150 mm dia. borewell.29 30449. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. WP-SMP Each 36717 2995.00 Each 43761 2995. suitable for 20 to 80 LPM discharge at 221 to 101 m head & (max efficiency at 163 m head & 50 Ipm discharge &delivery pipe of necessary diameter with a necessary H. 50 c/s AC supply suitable for 150 mm dia.00 Each 28700 1749. type clamps as per specification No. type clamp as per specification No. type clamp as per specification No. suitable for 300 to 850 LPM discharge at 55 to 17 m head & (max efficiency at 40 m head & 600 Ipm discharge &delivery pipe of necessary diameter with a necessary H. with delievery head from 84 to 40 m and discharge from 30 to 90 Itrs per minute (Max. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V. type clamp as per specification No.02 51788. suitable for 60 to 175 LPM discharge at 130 to 75 m head & (max efficiency at 106 m head & 125 Ipm discharge & delivery pipe of necessary diameter with a necessary H. suitable for 20 to 80 LPM discharge at 294 to 134 m head & (max efficiency at 218 m head & 50 Ipm discharge & necessary diameter delivery pipe line with a necessary H. C. suitable for 10 to 50 LPM discharge at 45 to 13 m head & (Max. As per specification o. WP-SMP Supplying and erecting submersible pumpset of required HP with 415 V.C. supply.efficiency at 52 m head & 30 Itr discharge & delivery pipe of necessary diameter) erected with necessary H. WP-SMP Supplying and erectingsubmersible pumpset of required HP with 415 V. type clamps as per specification no. borewell. 230V 50 cycles A. borewell of required HP with.29 18845. 230 V 50 cycles A. C. head & (Max.. type clamp as per specification No. suitable for 10 to 50 LPM discharge at 32 to 12 m head & (Max. suitable for 10 to 50 LPM discharge at 160 to 45 m head & (Max. type clamp as per specification No.29 25902.12-3-36 12-3-37 12-3-38 Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with 230 V 50 cycles A. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.29 21566. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.00 12-3-43 Each 20291 1749. type clamp as per specification No.. Borewell of required HP with .00 12-3-39 Each 17667 1749. effciency at 69 m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. type clamp as per specification No.230 V 50 cycles A.C.C. type clamp.29 22040. C.29 19064. borewell of required HP with. suitable for 85 to 170 LPM discharge at 43 to 18 m head & (Max. effciency at 26 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. 230 V 50 cycles A. effciency at 24 m head 130 LPM discharge) & delivery pipe of necessary diameter with a necessary H. suitable for 10 to 50 LPM discharge at 72 to 20 m head & (Max. borewell of required HP with. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.29 29209.C. borewell of required HP with-. effciency at 33 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. effciency at 34 mtr. suitable for 10 to 50 LPM discharge at 144 to 40 m head & (Max. type clamp as per specification No. type clamp as per specification No. type clamp. 230 V 50 cycles A. type clamp as per specification No. effciency at 78 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. effciency at 91 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. 230 V 50 cycles A. borewell of required HP with.00 Each 20131 1749. effciency at 116 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.C. 230 V 50 cycles A.29 19416. suitable for 10 to 50 LPM discharge at 127 to 35 m head & (Max. C. 230 V 50 cycles A.C. borewell of required HP 415 V 50 cycles A. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.. type clamp as per specification No. suitable for 10 to 50 LPM discharge at 54 to 15 m head & (Max. type clamp as per specification No. C. As per specification No.29 20258.00 12-3-41 Each 21587 1749.29 30378.29 33156.00 12-3-42 Each 24153 1749. WP-SMP Each 18509 1749. suitable for 10 to 50 LPM discharge at 109 to 30 m head & (Max. suitable for 30 to 90 LPM discharge at 42 to 20 m head & (Max.29 25752.C. effciency at 104 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H..00 12-3-40 Each 18408 1749.C.. effciency at 42 m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.00 Each 17096 1749. C. type clamp. effciency at 91 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. C. C. suitable for 85 to 170 LPM discharge at 32 to 12 mtr.00 12-3-49 Each 17315 1749. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. effciency at 39 m head 30 LPM discharge ) &delivery pipe of necessary diameter with a necessary H.00 . suitable for 10 to 50 LPM discharge at 45 to13 m head & (Max.230 V 50 cycles A. borewell of required HP with.. head 30 LPM discharge ) &delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. suitable for 10 to 50 LPM discharge at 127 to 35 m head & (Max.. effciency at 33 m... borewell --do--. 230 V 50 cycles A. As per specification No. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.00 12-3-44 Each 24003 1749. 230 V 50 cycles A.00 12-3-48 Each 31407 1749.00 12-3-46 Each 28629 1749. suitable for 30 to 90 LPM discharge at 51 to 25 m head & (Max..29 21880.00 12-3-45 Each 27460 1749. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. effciency at 33 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. type clamp. type clamp as per specification No.29 23336.230 V 50 cycles A. borewell of required HP with . borewell of required HP with .29 20157. borewellof required HP with. suitable for 30 to 90 LPM discharge at 84 to 40 m head & (Max. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.00 12-3-47 Each 19817 1749. 230 V 50 cycles A. As per specification No. head 60 LPM discharge) & delivery pipe of necessary diameter with a necessary H. 29 19655. C.00 12-3-61 Each 18333 1749. borewell of required HP with.. type clamp as per specification No.29 19051. C.00 12-3-56 Each 23789 1749. C. As per specification No. borewell of required HP with.29 24331. suitable for 10 to 50 LPM discharge at 160 to 45 m head & (Max. As per specification No..00 Each 17252 1749.. suitable for 10 to 50 LPM discharge at 109 to 30 m head & (Max. suitable for 10 to 50 LPM discharge at 54 to 15 m head & (Max. 415 V 50 cycles A. type clamp. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.29 20547. effciency at 11m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.29 24180. effciency at 39 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. C. borewellof required HP with. type clamp. effciency at 104 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. suitable for 85 to 170 LPM discharge at 32 to 12 m head & (Max. type clamp as per specification No. suitable for 30 to 90 LPM discharge at 42 to 20 m head & (Max. suitable for 85 to 170 LPM discharge at 43 to 18 m head & (Max. 415 V 50 cycles A. suitable for 10 to 50 LPM discharge at 90 to 25 m head & (Max. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.. suitable for 30 to 90 LPM discharge at 51 to 25 m head & (Max. C. borewell of required HP with. C. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.415 V 50 cycles A. As per specification No. suitable for 10 to 50 LPM discharge at 127 to 35 m head & (Max. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with. As per specification No.29 30755. C. type clamp. C. borewell of required HP with... suitable for 10 to 50 LPM discharge at 144 to 40 m head & (Max. borewell of required HP with. C. effciency at 69 m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.00 12-3-60 Each 20649 1749. 415 V 50 cycles A. 415 V 50 cycles A. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. 415 V 50 cycles A.00 Each 17302 1749. C. effciency at 116 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.00 12-3-57 Each 18798 1749. borewell of required HP with . effciency at 34 m head 60 LPM discharge ) & with a necessary H. effciency at 51m head 60 LPM discharge ) &delivery pipe of necessary diameter with a necessary H. 415 V 50 cycles A. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.00 12-3-62 Each 29006 1749.. effciency at 52 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. borewell of required HP with . type clamp as per specification No.29 20975. C. type clamp as per specification No.. suitable for 10 to 50 LPM discharge at 72 to 20 m head & (Max.00 12-3-55 Each 22494 1749. effciency at 78 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.. borewell of required HP with. type clamp as per specification No. borewellof required HP with. effciency at 42 m head 60 LPM discharge ) &delivery pipe of necessary diameter with a necessary H. C. effciency at 66 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. suitable for 85 to 170 LPM discharge at 54 to 21m head & (Max. WP-SMP Each 17906 1749. 415 V 50 cycles A. 415 V 50 cycles A.29 20082.29 27512. type clamp as per specification No..29 24243. suitable for 30 to 90 LPM discharge at 84 to 40 m head & (Max.. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. 415 V 50 cycles A.00 12-3-63 Each 22582 1749.00 12-3-59 Each 25763 1749. effciency at 91 m head 30 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.00 12-3-58 Each 22431 1749. suitable for 30 to 90 LPM discharge at 63 to 30 m head & (Max. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.29 22398. borewell of required HP with-.29 19793.00 .29 25538. 415 V 50 cycles A. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. type clamp as per specification No.00 Each 19226 1749. type clamp as per specification No. type clamp.415 V 50 cycles A.29 19001. borewell of required HP with.00 12-3-54 Each 18044 1749. effciency at 91 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. C. C. type clamp as per specification No. 415 V 50 cycles A. borewell of required HP with-.12-3-50 12-3-51 12-3-52 12-3-53 Supplying and erecting submersible pumpset suitable for 100 mm dia. type clamp as per specification No. effciency at 24 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. 415 V 50 cycles A. C.29 29309. 50 Hz. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.415 V 50 cycles A. Each 26027 1749. WP-OSP Supplying and erecting submersible pump set suitable for erection on open well --do--.00 12-3-71 Each 32601 1749.29 34350. 415 V 50 cycles A. suitable for 30 to 90 LPM discharge at 147 to 70 m head & (Max.00 12-3-66 Each 24744 1749.P.. borewell of required HP with. C. WP-OSP Each 16611 1749. type clamp.M. WP-OSP Supplying and erecting submersible pump set suitable for erection on open well --do--. WP-OSP Supplying and erecting 1 phase. WP-OSP Supplying and erecting 1 phase. suitable for 85 to 170 LPM discharge at 110 to 46 m head & (Max. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. suitable for 30 to 90 LPM discharge at 126 to 60m head & (Max. pump having delivery head from 20 to 10m and discharge from 450 to 1600 Itrs.. pump having discharge 35 / 270 L. type clamp as per specification No.00 12-3-70 Each 30489 1749.. having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs.29 32817. and discharge from 400 to 1000 Itrs. effciency at 49 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.29 29293. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. effciency at 100 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. pump having discharge 130 / 475 L. borewell of required HP with. submersible pump set suitable for erection on open well ..29 32238. 415 V 50 cycles A. pump having delivery head from 36 to 18 m and discharge from 400 to 1000 Itrs. 415 V 50 cycles A.00 12-3-65 Each 27544 1749.29 29930.29 18360. effciency at 85m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. effciency at 83 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.12-3-64 Supplying and erecting submersible pumpset suitable for 100 mm dia. borewell of required HP with . 230 V..00 . effciency at 136m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. pump having delivery head from 24 to 13m. type clamp as per specification No.415 V 50 cycles A. borewell of required HP with. per minute (Max efficiency at 16 m head & 500 Itr discharge) & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. 230 V. type clamp as per specification No.29 30374. WP-SMP Preferably energy efficient motors with p. C.. 415 V 50 cycles A. suitable for 85 to170 LPM discharge at 67 to 27 m head & (Max. 415 V 50 cycles A.00 12-4-5 (New) Each 15448 1749. submersible pump set suitable for erection on open well.C..00 12-4-6 (New) Each 16325 1749. type clamp as per specification No.29 17197.P. effciency at 119m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H. WP-OSP Supplying and erecting submersible pump set suitable for erection on open well --do--.00 12-4-2 Each 18559 1749. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia. As per specification No. effciency at 102m head 60 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.00 12-4-4 Each 28181 1749.C. .A. effciency at 68 m head 130 LPM discharge ) & delivery pipe of necessary diameter with a necessary H.C.00 12-3-69 Each 27560 1749. per minute (Max efficiency at 29 m head & 680 Itr discharge) & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. per minute (Max efficiency at 17 m head & 1250 Itr discharge) & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No..29 27776. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.00 12-3-68 Each 32689 1749. borewell of required HP with. suitable for 85 to 170 LPM discharge at 133 to 55 m head & (Max.29 18074.29 34438.00 Note :- 12.. supply. C.00 12-4-3 Each 28625 1749.415 V 50 cycles A.. type clamp. borewell of required HP with.9 shall be used. As per specification No.29 26493. head 21 / 9 m & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. suitable for 30 to 90 LPM discharge at 105 to 50m head & (Max.C.4 Submersible pumps for Open well (OSP) 12-4-1 Supplying and erecting submersible pump set suitable for erection on open well of required HP with 415 V 50 c/s. head 30 / 15 m & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. 50 Hz. type clamp as per specification No. suitable for 30 to 90 LPM discharge at 168 to 80 m head & (Max. borewellof required HP with.f above 0. type clamp as per specification No.29 20308. WP-SMP Supplying and erecting submersible pumpset suitable for 100 mm dia.M. suitable for 85 to 170 LPM discharge at 88 to 36 m head & (Max. per minute (Max efficiency at 21m head & 680 Itr discharge) & delivery pipe of necessary diameterline erected with necessary H type clamps as per specification No.C. borewellof required HP with-.00 12-3-67 Each 31068 1749. Starter 400V.23 1816.P.72 70.Note :- 1) Preferably energy efficient motors with p. Water level controller. ammeter. P.00 12-5-4 Each 6543 123. Supplying and erecting D. Supplying & erecting Water lavel controller 230/ 415V AC. 116 13.91 4665. phase indicating lamp etc. L. phase indicating lamp etc. to 35 H.5 Accessories 12-5-1 Supplying and erecting D.) Supplying and erecting fully Automatic star/delta starter suitable for 15.42 10389.P. 4 way for U/G tank. Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.00 8870.O. squirrel cage motor totally enclosed with overload and no volt relay completeerected on provided angle iron frame.56 197. voltmeter.I.(Similar to L & T make ML-1.42 48. Supplying & erecting automatic control panel for 7 to 10 HP centrifugal/ submersible pump set consisting of DOL starter.00 12-5-11 Mtr. Supplying and erecting flat flexible 3 core 1.52 3996. Each 1755 61.f above 0.P.& OH tank.P.5 H. single phase.42 9630. Supplying and erecting fully Automatic star/delta starter suitable for 10 H.00 12-5-10 Mtr. Water level controller .52 6667. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.52 9933. 2 way for U/G tank. Supplying and erecting flat flexible 3 core 2.52 16831.7 1599. 36 13. S.42 197..00 4548.00 216. voltmeter.00 12-5-12 Sqm.P.00 12-5-21 Each 20588 197.S.. Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. voltmeter.S.25mm (18 SWG) for protection from rain complete with collar at bottom & strengthening with M. to 25 H.0 H. Four way for under ground & Over head tank operation .00 12-5-19 Each 9433 197. ammeter. (similar to L & T make MK-2 FASD model. voltmeter.00 .) Supplying and erecting single pole 250V or double pole 500 V 10 A float switch with 2m chain with adjustable stop counter weight float with necessary materials in position. phase indicating lamp etc.P... 2 way for U/G tank.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. Supplying & erecting PVC coated 5 mm dia Brass Sensor/ electrode duly wired with nut & bolts complete Supplying & erecting automatic control panel for 1 to 6 HP centrifugal/ submersible pump set consisting of DOL starter. complete Supplying & erecting Water lavel controller 230/415 V AC.P.00 12-5-14 12-5-15 12-5-16 12-5-17 Each Each Each Each 3892 4351 167 8673 197. S.P. phase indicating lamp etc. ammeter.S. voltmeter.00 12-5-2 Each 1072 54. 3 phase. (size to be specified in sq. O. Supplying and erecting hand operated star/delta starter suitable for 7. handle at top for lifting & drip proof louvers for ventilation erected at the position.P..P.52 5422. 56 13. Each 3872 123. Supplying & erecting automatic control panel for 1 to 6 HP centrifugal/ submersible pump set consisting of DOL starter. (similar to L & T make MK-1 FASD model.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.42 4089. m.72 97.00 12-5-18 Each 9374 197. P. to 12. Supplying and erecting cover for motor made from G.P. ammeter.P. 1320 278.00 12-5-3 Each 5298 123.00 12-5-9 Mtr. Water level controller .00 12-5-6 Each 16707 123. Supplying & erecting automatic control panel for 11to15 HP centrifugal/ submersible pump set consisting of star delta starter. 50 cycleswith overload element with necessarymaterials and connected to supply upto 2 H.00 12-5-8 Mtr. phase indicating lamp etc.5 H.00 12-5-7.P.L. Supplying & erecting automatic control panel for 7 to 10 HP centrifugal/ submersible pump set consisting of DOL starter. ammeter. 12.& OH tank.00 12-5-13 Each 4515 149.. to 12.5 H.) Supplying & erecting directly operated single phasing preventor omp[lete erected to supply to operate in case of single phaseing with guarantee for mi9nimum one Year.00 12-5-5 Each 9809 123. Water level controller.42 9571.72 50.9 1127. Starter suitable for 250V.42 20785. 83 13. 4 way for U/G tank.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.72 130.S.P. strip. squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.00 12-5-20 Each 10192 197.P. 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 10 H.. Water level controller . sheet of 1.P.5 FASDModel) Supplying and erecting fully Automatic star / delta starter suitable for above 25 H.P. Two way for under ground tank operation only. 2 way for U/G tank.9 shall be used. (22 kW) with Suction / Delivery size of 80 / 65 mm as per specification No.83 48.9 133404. FF-MFP/SBM Supplying.) at 88m head centrifugal type. testing and commissioning of main Fire service submercible pump.2 120717. erecting.per 3 meter.00 13-3-2 Each 110846 2499.18 161056. 1800 LPM at 56m head. FFMFP/SSC Supplying and installing. testing.7 271938. 440V. perfect aligning and proper leveling and commissioning of fire service main pump.7 322158. 75 HP.00 13. perfect aligning and proper leveling and commissioning of fire service main pump. testing and commissioning of main Fire service submercible pump. erecting. 7 stage. multistage.00 13-1-3 Each 263187 8750. erecting. perfect aligning and proper leveling and commissioning of fire service main pump. 3 stage. For single phase pump panel.S. 2400 LPM at 88 m head. 2800 LPM at 105m head. multistage.2 Main Fire Pumps (Multi Stage Centrifugal) (MFP/MSC) 13-2-1 Supplying and installing.) at 76 m head centrifugal type single stage pump. 75 HP.00 13-2-2 Each 313407 8750.) at 56m centrifugal type single stage pump of 30 HP. 105HP as per specification No.42 1228.9 101262. FFMFP/SSC Each 113966 6751. erecting. (55 kW) Suction / Delivery size of 125 / 100 mm as per specification No. (37 kW) Suction / Delivery size of. of 2800 LPM (Litres/min.1 Main Fire Pumps (Single Stage Centrifugal) (MFP/SSC) 13-1-1 Supplying and installing. FF-MFP/SBM Supplying. testing.42 22956.00 13-3-4 Each 98762 2499.9 78306. Dismantling the existing submersible pump with PVC pipeline.00 Chapter 13 : FIRE FIGHTING & FIRE ALARM (FF) 13. testing.9 113346.) at 76m head centrifugal type. FF-MFP/SBM Each 75806 2499. 50 HP. 4 way for U/G tank. Dismantling the existing submersible pump with GI pipeline upto 10 m depth. Dismantling the existing ejecto pump with PVC pipeline. 2 stage. of 2800 LPM (Litres/min. phase indicating lamp etc. multistage.P. testing and commissioning of main Fire service submercible Pump 2 stage of 1400 LPM at 56mtr Head and at 1400 RPM. FF-MFP/MSC Supplying and installing. (55 kW) Suction / Delivery size of125 / 100 mm as per specification No. FFMFP/SSC Supplying and installing.) at 105m head centrifugal type.4 Jockey Pumps (Centrifugal) (MFP/JP) .42 1228. erecting.00 614. of 2400 LPM (Litres/min.00 13. 120 HP. FF-MFP/SBM Supplying.68 375311.00 13-3-5 Each 215684 3756. FF-MFP/MSC Each 261253 8750. 45HP as per specification No. ammeter. (55 kW) Suction / Delivery size of 100 / 80 mm as per specification No. 30 HP as per specification no.P. (90 kW) Suction / Delivery size of 150 / 125 mm as per specification No. Water level controller . erecting. of 1400 LPM (Litres/min.00 13-1-2 Each 179233 6751. testing. perfect aligning and proper leveling and commissioning of fire service main pump. perfect aligning and proper leveling and commissioning of fire service main pump. testing. 5 stage. testing and commissioning of main Fire service service submercible Pump 4 stage 280 LPM at 76m Head 60 HP as per specification No. testing and commissioning of main Fire service submercible pump. Dismantling the existing ejecto pump with GI pipeline upto 10 m depth.00 13-3-6 Each 130904 2499. FF-MFP/SBM Supplying.12-5-22 Note :- Supplying & erecting automatic control panel for 11 to 15 HP centrifugal/ submersible pump set consisting of star delta starter. FF-MFP/MSC Supplying and installing. perfect aligning and proper leveling and commissioning of fire service main pump.00 614.00 1229. 3Ph. voltmeter.83 614. 80 / 65 mm as per specification No. reduce overall rate by 50% Each 22759 197. of 1800 LPM (Litres/min. FF-MFP/SBM Supplying. of 2400 LPM (Litres/min.00 1229.51 614. 75HP as per specification No.00 13. 30HP as per specification No.& OH tank.) at 76 m head centrifugal type single stage pump.00 13-2-3 Each 364684 10626.3 Main Fire Pumps (Submersible) (MFP/SBM) 13-3-1 Supplying.50/.18 219440. 75 HP.2 185984. testing. 1800 LPM at 76m head.6 Dismantling 12-6-1 12--6-2 12-6-3 12--6-4 12-6-5 12-6-6 Dismantling the existing water pump set centrifugal type without pipeline complete and making the site clear. testing and commissioning of main Fire service submercible pump .. (For additional depth of each 3 mtrs or part thereof add Rs.00 48.00 13-3-3 Each 157300 3756. in the rates) HP HP Each Each Each Each 0 0 0 0 0 0 47.51 47. Dismantling the existing ejecto type water pump set without pipeline complete and making the site clear.7 270004.00 12. 240 LPM at 105m head. for excavation and anti-corrosive protections.00 13-7-9 13-7-10 13-7-11 13-7-12 Each Each Each Each 4034 5351 7820 14316 157. FF-MFP/BP Each 22354 854.06 23208. FF-VL/SV Supplying and installing cast iron double flange sluice valve 200 mm dia.97 37952. FF-MFP/JP Supplying installing.3 157.00 14187. FF-PP Supplying and installing G.C.00 797. Mtr. FF-MFP/BP Supplying installing. FF-MFP/JP Jockey Pumps (Submercible type) Supplying installing.62 153. 4 stage. Mtr.17 68.65 315.00 Each 62016 750.pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings as per specification no.5HP as per specification No.58 77276.00 13.C.00 1163.00 13-5-2 Each 28923 908. Mtr. FF-PP Supplying and installing G. testing. commissioning of Jockey Pump Submercible type.10 HP Suction / Delivery Size 50/32 mm as per specification No. FF-VL/FV End Line Strainer (+ve suction) (ELS) Supplying and installing 75/80 mm dia end line strainer for +ve suction as per specification No. FF-VL/ELS Supplying and installing 100 mm dia end line strainer for +ve suction as per specification No. as per specification No. 126 171 321 524 756 1122 1910 27.C.3 1898.85 38991.pipe above ground of ‘C’ class ERW of size 20 mm dia with necessary fittings as per specification No. submercible pump. commissioning of Booster Pump of 468 LPM at 40m head . FF-VL/SV Butterfly Valves (BFV) Supplying & Installing cast iron double flange butterfly valve of size 75/80 mm dia.00 Each 37327 624. as per specification No. 440 A. Mtr.65 2388.45 27.24 205.00 2148.pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings as per specification no.17 41. FF-PP Supplying and installing G.17 41. head 3 ph. Mtr.5 HP Suction / Delivery Size 50/32 mm as per specification No. FF-PP In case of laying underground pipes. 440 A.00 3283.15 HP. FF-VL/FV Supplying and installing cast iron foot valve of size 100 mm dia with strainer for negative suction as per specification No.I.00 13-6-1 13-6-2 13-6-3 13-6-4 13-6-5 13-6-6 13-6-7 Note :- 13. testing. FF-MFP/JP Supplying installing. FF-VL/BFV Each Each Each Each 4818 6150 13260 13910 137.13-4-1 13-4-2 13-4-3 13-4-4 Supplying installing. FF-VL/SV Supplying and installing cast iron double flange sluice valve 100 mm dia. add 20 % in the above overall rates.00 14632. 10HP as per specification No. 20 HP (18.3 315.00 1979.I. commissioning of Jockey Pump of 240 LPM at 105 mtr. commissioning of Booster Pump of 450 LPM at 35 m head single stage (mono block) 3 ph. as per specification No. 6 stage.59 4955.pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings as per specification no.00 13-7-5 13-7-6 13-7-7 13-7-8 Each Each Each Each 2231 3126 6089 10683 157.3 157.as per specification No.65 315. (11 kW) Suction / Delivery Size 50/32 mm as per specification No. 240 LPM at 56m head. 7. FF-PP Supplying and installing G. FF-PP Supplying and installing G.00 13-7-13 13-7-14 Each Each 1741 1991 157.pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings as per specification No.00 13466. testing.3 315.7 Valves (VL) 13-7-1 13-7-2 13-7-3 13-7-4 Foot Valve (FV) Supplying and installing cast iron foot valve of size 75/80 mm dia with strainer for negative suction as per specification No.pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings as per specification No.pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings as per specification no. testing. 440 A. commissioning of Jockey Pump of 240 LPM at 56 m head. FF-VL/BFV Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia.3 157. FF-PP Supplying and installing G.86 276.5 kW) Suction / Delivery Size 50/32 mm as per specification No.00 Each 75900 1375.00 6405.I. FF-MFP/JP Each 38027 963..00 6287.45 27.00 10999.00 348.65 4191. testing. testing. 7.24 137.00 198.I. Mtr.I.00 8136. FF-VL/FV Supplying and installing cast iron foot valve of size 200 mm dia with strainer for negative suction as per specification No. 3 ph.45 41. commissioning of Jockey Pump Submercible type.I.00 13. FF-VL/FV Supplying and installing cast iron foot valve of size 150 mm dia with strainer for negative suction as per specification No.00 . Mtr.00 5508.6 62767.as per specification No.I. FF-VL/ELS Sluice Valve Supplying and installing cast iron double flange sluice valve 75/80 mm dia. FF-VL/ELS Supplying and installing 200 mm dia end line strainer for +ve suction as per specification No.6 Pipes (PP) Supplying and installing G. as per specification No.96 29832.5 Booster Pump (MFP/BP) 13-5-1 Supplying installing.00 565. FF-VL/SV Supplying and installing cast iron double flange sluice valve 150 mm dia. FF-VL/ELS Supplying and installing 150 mm dia end line strainer for +ve suction as per specification No. 3 315.00 13-8-13 Each 10594 187.00 13-8-2 Each 5757 142. FF-FFA/RHP Nozzles (NZ) Supplying G. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No.00 13-8-4 Each 8992 142.fitted with necessary accessories complete as per specification No.as per specification No.13-7-15 13-7-16 13-7-17 13-7-18 13-7-19 13-7-20 13-7-21 13-7-22 13-7-23 13-7-24 Supplying & Installing cast iron double flange butterfly valve of size 150 mm dia. FF-VL/NRV Supplying and installing double flange NRV of size 150 mm dia as per specification No.62 68. FF-FFA/HOP Supplying & erecting high pressure rubber hose pipe 19 mm dia complete as per specification no.00 13-8-12 Each 6414 187.00 8717.52 9135.00 5078.06 145.00 13-8-10 13-8-11 Each Each 2579 878 0 0 2579.S.00 878.35 13792. FF-VL/BFV Non Return Valves (NRV) Supplying and installing double flange NRV of size 75/80 mm dia as per specification No.52 7448.00 105. FF-FFA/HV Hose Pipes Supplying fire fighting C.I. FF-FFA/NZ Supplying & erecting Gun Metal Chrome plated Nozzle. FF-VL/NRV Supplying and installing double flange NRV of size 200 mm dia as per specification No.L. 63 MM dia.65 3814.00 22812.air release cock. with necessary G. FF-VL/GV Supplying & installing gun metal gate valve of size 50 mm dia as per specification no.00 13-8-6 Each 3042 0 3042. FF-FFA/ACT Air Release Valve (ARV) Supplying and erecting 20/25mm Ø G.00 14091.00 5650. FF-VL/BFV Supplying & Installing cast iron double flange butterfly valve of size 200 mm dia. for -ve suction only.91 6602.8 Fire Fighting Accessories (FFA) 13-8-1 Priming Tank Supplying & installing One piece moulded HDP / Fibre water tank. fitted with necessary accessories complete as per specification no.00 13-8-8 13-8-9 Mtr. FF-FFA/RRL Supplying fire fighting Flax canvas Hose pipe.P. Hose pipe.57 5815.5m in height M.00 Each Each 514 818 68.2 11321.M.65 315.00 13-8-14 Each 11071 250. fitted with necessary accessories complete as per specification no. 63mm dia.00 13-8-15 Each 479 31. tank installed inside pump house as per specification No. FF-VL/GV Hydrant Valves (HV) Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification No.3 157.19 mm dia. FF-FFA/NZ Fire Brigade Connection (FBC) Supplying and installing fire brigade Header of 150 mm Ø. (controlled percolation) Hose pipe. 15m in length.00 13-8-3 Each 5690 124.00 13.00 Each Each Each Each 3657 4921 8401 13775 157. FF-VL/HV Each Each 3496 5493 157. FF-VL/NRV Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-FFA/HV Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia 36m long high pressure polypropylene (Polyhose) pipe fitted with necessary accessories complete as per specification No.67 511. FF-FFA/CPH Supplying fire fighting R. FFFFA/SMC Air Cushion Tank (Air Vessel) (ACT) Supplying and installing Air Vessel of 300 mm Ø 1. in length. FF-VL/NRV Gate / Wheel Valves (GV) Supplying & installing gun metal gate valve of size 20/25mm dia as per specification No. Mtr.52 5900.complete as per specification No.00 .62 583.3 157. having capacity 1000 ltrs. branch pipe of 63 mm Ø fitted with 20 mm Ø detachable hexagonal nozzle as per specification No. 63mm dia. 144 104 1.R. as per specification No. FF-FFA/HRD Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. coupling to be fitted on top of Air vessel or on wet riser as per specification No.M. FF-FFA/ARV Pressure Guage (PG) Each 11644 2148.00 887.15m in length.15 mtr. FF-FFA/CHP Supplying & erecting high pressure polypropylene hose pipe 63 mm dia. FF-FFA/PT Hose Reel with Drum (HR) Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia 22. FF-FA/FBC Siamese Connection (SMC) Supplying and installing fire brigade Header (Siamese Connection) of 150 mm Ø for supplying water to wet riser system as per specification No. for supplying water in fire tank as per specification No.00 Each Each 7305 22669 142. 19 mm Ø complete as per specification No.06 1. fitted with necessary accessories complete as per specification no. FF-VL/HV Supplying and installing gun metal Double outlet hydrant valve fitted with necessary accessories complete as per specification No.91 10782.52 142.3 3653.5m long high pressure polypropylene (Polyhose) pipe fitted with necessary accessories complete as per specification No.00 13-8-7 Each 5978 0 5978.00 13-8-5 Each 2873 0 2873. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc.34 727.00 13-10-9 Mtr. x 25 mm.5 sq.72 103. x 736 x 736 mm. erecting and testing optical type smoke detector complete on box as per specification No.00 13-10-5 Mtr. x 25 mm.) made from 16 SWG sheet and angle iron 25 mm. as per requirement in an approved manner as per specification No. Brass orifice plate having 6 mm. FF-FAAS/MCP Supply and erecting hooters with CRCA enclosure complete as per specification No.mm.00 13. nipple. 500 Volt.) made from 16 SWG sheet and angle iron 25 mm.00 Each 3278 187.62 760. To withstand temp.34 543. The range of smoke detector is max 325 feet.5 sq. Brass orifice plate having 6 mm thickness./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm. To withstand temp.S.01 668. 518 25. CB-LT/CU Supplying and erecting PVC armoured cable 8 core 1.S.57 1249. 70 11. 49 7. Supplying and erecting M. FF-FAS/HD Supplying.mm. testing and commissioning Manual Call Point (Pill box) with break glass push button in metal enclosure complete as per specification No. 950 Deg C for period of 3 hrs.62 1557.57 424. in an approved manner as per specification No.91 5618.00 173.) made from 16 SWG sheet and angle iron 25 mm. pipe. elbow etc. hose pipe.2 11486.00 Each 1507 49.5 sq. x 4 mm./CRCA cabinet for housing Floor Hydrant valve. erecting and testing remote response indicators as per specification No. and G. FF-FFA/OP Supplying and erecting one no. 950 Deg C for period of 3 hrs.89 748.00 35250.61 82. 702 25. FF-FAAS/HTR Supplying. duly painted in post box red colour.00 13-10-8 Mtr. Mechanical shock and High Pressure water stream used during the fire fighting as per specification no FF-FAAS/MIC Each 299 124. 89 13. Mechanical shock and High Pressure water stream used during the fire fighting as per specification no FF-FAAS/MIC Supply and erecting two core 2.00 Each 5430 187. Supplying and erecting M.00 1546. Mineral Insulated copper cable with an overall (LSF) covering. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. For large areas and passages beam detectors should be prefebraly used (Item No.00 13-10-7 Mtr. FF-FFA/OP MS / CRCA Boxes (BOX) Supplying and erecting M.39 56. 140 mm outer dia of 140 mm at every single outlet hydrant valve as per specification No. 351 111 41 124.mm. CB-LT/CU Supplying and erecting PVC armoured cable 12 core 1. FRLS copper conductor complete erected on wall/ ceiling as per specification No.10 Fire Alarm Accessories (FAAS) 13-10-1 Supplying. FF-FFA/PS Orifice Plate (OP) Supplying and erecting one no. hose reel and branch pipe (size 1000 mm.00 . FF-FAAS/RRI Supplying and erecting PVC armoured cable 2 core 1.00 Each 11236 250.. CB-LT/CU Supplying and erecting PVC armoured cable 4 core 1.29 5./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.00 46. x 4 mm. FRLS copper complete erected on wall/ ceiling as per specification No.9 Fire Alarm System (FAS) 13-9-1 13-9-2 13-9-3 Supplying and erecting testing heat detector complete on box as per specification no.I. Mineral Insulated copper cable with an overall (LSF) covering. thickness..S. 13-9-3) Each Each Each 1499 1421 34000 124. erecting. Each 712 35. elbow etc..5 mm sq. x 25 mm. CB-LT/CU Supply and erecting two core 1. G.00 Each 710 49. 160 mm outer dia at every double outlet hydrant valve as per specification No. x 4 mm.95 1624. duly painted in post box red colour. FRLS copper complete erected on wall/ ceiling as per specification No.28 476.00 13-10-2 13-10-3 13-10-4 Each Each Mtr.00 Note :- 13.mm. duly painted in post box red colour. pad cock valve. FF-FFA/PG Pressure Switch (PS) Supplying and installing DANFOSS make pressure switch with 12/15 mm Ø isolation valve. 0-300 PSI or 0-21 kg per cm square fitted with 12/15 mm Ø.57 124.57 62.91 3466.00 Each 630 38.I.5 mm sq. 500 Volt. FF-FAS/SD Supplying & Erecting four wire conventionally single ended reflected type beam smoke detector with 8 “ receiver .00 13-10-6 Mtr. FRLS copper complete erected on wall/ ceiling as per specification No.5 sq.13-8-16 13-8-17 13-8-18 13-8-19 13-8-20 13-8-21 13-8-22 Supplying and installing pressure gauge of 100 mm Ø. local control panel (LCP) with standard accessories complete as per specification No.5 mm sq.00 13-12-3 Each 7589 142.67 31.11 P A System (PAS) 13-11-1 Supplying.00 13. Mineral Insulated copper cable as per specification no FF-FAAS/MIC 1) Item no 13-10-8 to 13-10-13 shall be utilised only for original work with prior permission from Chief Engineer (Electrical) 2) Mineral Insulated Copper Cable (A heavy duty grade with a voltage rating of 1000 volt .52 6766.5 mm sq. local signal control panel (LCP) with standard accessories complete as per specification No. FF-PA/MCC Each 11473 78.1 Temporary Illumination (TE-IL) Unit . Supplying. erecting.12 40. Table stand for microphone.28 1762. erecting. testing and commissioning microphone as per specification No. testing and commissioning 2 Zone. testing and commissioning the 2 Zones Microprocessor based conventional Fire Alarm Control Panel (FACP) with standard accessories complete as per specification No. To withstand temp. testing and commissioning amplifier 120 W for Public address system suitable to operate on 230 Volts A. Mineral Insulated copper cable as per specification no FF-FAAS/MIC Supply and erecting Gland and Plain Seals suitable for 7 Core 1.97 11775. stand for microphone. erecting. FF-SPR Supplying & erecting vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 75/80 mm dia having following features 1) Visual Switch Activation 2) Rugged Switch Assembly 3) Heavy Duty Alluminium pipe Saddles 4) Durable Metal Encloser 5) Steel U Bolts For Secure Mounting 6) Two SPDT ( Single Pole Double Track ) Synchronised Switches 7) Serviceable Without Draining Pipes Supplying & erecting vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual Switch Activation 2) Rugged Switch Assembly 3) Heavy Duty Alluminium pipe Saddles 4) Durable Metal Encloser 5) Steel U Bolts For Secure Mounting 6) Two SPDT ( Single Pole Double Track ) Synchronised Switches 7) Serviceable Without Draining Pipes Each 410 142. (Similar to AHUJA make model DGN) Supplying & erecting.FF-FAAS/FACP. 1722 3046 1209 723 132 40.00 Chapter 14 : TEMPORARY ILLUMINATION (TE .57 5325. supply as per specification No.00 Each Each Each 566 566 2690 31.5 mm sq. testing & commissioning the 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification No.00 Each 5200 124.00 1249.67 31.00 Each 11150 624.IL) 14.00 13-11-2 13-11-3 13-11-4 13-11-5 13-11-6 Each Each Each Each Mtr. FF-PA/MIC Supplying & erecting. FF-FAAS/LCP Increase over all rate by 10 % for additional zone as per requirement.00 137. testing & commissioning the 2 Zones. FF-PA/AFR Supplying. Supplying. erecting. 950 Deg C for period of 3 hrs. Mtr.. Supplying. testing to 2 core shielded Microphone cable as per specification No.12 11551.12 Sprinklers (SPR) 13-12-1 Supplying and erecting 15 mm (1/2") dia.C.52 553. testing and commissioning sound column 15 Watts complete as per specification No.00 2722. Mineral Insulated copper cable as per specification no FF-FAAS/MIC Supply and erecting Gland and Plain Seals suitable for 2 Core 2. erecting . Mechanical shock and High Pressure water stream used during the fire fighting as per specification no FF-FAAS/MIC Supply and erecting Gland and Plain Seals suitable for 2 Core 1.67 598.00 763. mm shall be preferably used in hazardous places like basement and Mezzanine floor for all utility services in Govt installation Supplying. erecting. Mineral Insulated copper cable with an overall (LSF) covering. FF-PA/SOC Supplying. FFFAAS/FACP Increase over all rate by 25 % for additional zone as per requirement. Increase over all rate by 25% for additional Zone as per requirement.00 13-12-2 Each 6623 142.12 40.5726 5325 13.13-10-10 13-10-11 13-10-12 13-10-13 Note :- 13-10-12 Note :13-10-13 Note :13-10-14 Note :13-10-15 Note :- Supply and erecting seven core 1.00 Each 11150 624. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No.52 7732.62 1540. (Similar to AHUJA make model DGT) Supplying erecting.9744 11775 Each 5200 124.00 3124.BS 6207:Part 1:1969) other than above three category up to 16 sq.12 5. Increase over all rate by 10% for additional Zone as per requirement.C. 750 Volt.5 mm sq.12 78. 1490 49.00 598. / 12 Volts D. FFFAAS/LCP. erecting . mains and Switchgears with continuous earth wire erected and dismantled.00 Each 166 29. with scaffolding upto three days. Providing oscillating type pedestal fan 16" (400 mm) or ceiling fan connected with necessary mains.00 Each 26 8.00 14-1-12 729 287. with miniature lamps of 6. Temporary illumination consisting of 2000W. mains and Switchgears with continuous earth wire erected and dismantled.78 41. Providing heavy duty Exhaust fan 18" or 24" connected with necessary mains. Switchgears erected and dismantled. or air cooler connected with necessary mains. Providing evaporator air cooler connected with necessary mains.56 193. complete halogen fitting with lamp. Temporary illumination consisting of Metal Halide flood light fitting 250 W complete with lamp.51 380. Each 24 8.00 14-1-13 362 47.45 32. holders. mains and Switchgears with continuous earth wire erected and dismantled. Temporary illumination consisting of strip lights consist of 50 bulbs 25W each in strip complete with holders.00 Each 166 38.00 Each 24 14. with using scaffolding upto three days.00 14-1-17 Each 133 0 133. with using scaffolding upto three days. Switchgears with continuous earthing maintaining the same during the function & including dismantling upto three days. holders.00 14-1-15 Each 5 0 5. mains and Switchgears with continuous earth wire erected and dismantled without using scaffolding upto three days.00 Each 163 38. mains and Switchgears with continuous earth wire erected and dismantled without using scaffolding upto three days. Temporary illumination consisting of tube light day light & colour 4' X 40 Watts complete erected with tubes. with miniature lamps of 6. Providing oscillating type pedestal air circulators 600/900 mm. holders.00 Each 149 29. Temporary illumination consisting of flood light 1000/500W. sungun or colour tran light fitting complete with stand cutter & strainer alongwith mains. Temporary illumination consisting of tube light day light & colour 4' X 40 Watts complete erected with tubes. bulbs of required Wattage mains. complete halogen fitting with lamp. bulbs of required Wattage mains.01 201. with using scaffolding upto three days. mains and Switchgears with continuous earth wire erected and dismantled without using scaffolding upto three days. fluorescent tube light/500 W flood light fitting complete with rubber boards and dismantling upto three days. Temporary illumination consisting of white/colour series lights 50 Nos. Providing temporary plug point with 3 pin 6A/16A with necessary mains & Switchgears & continuous earth connection upto three days. mains and Switchgears erected and dismantled with rotor effect as approved with scaffolding upto three days. Temporary illumination consisting of flood light fitting 1000/500W. Switchgears with continuous earthing maintaining the same during the function & including dismantling upto three days. Switchgears erected and dismantled without using scaffolding and maintaining the same upto three days.56 179.00 Each 149 38. Switchgears with continuous earthing maintaining the same during the function & including dismantling upto three days.00 .78 39. holders. Temporary illumination consisting of Metal Halide flood light fitting 400 W complete with lamp.00 Per Thousa nd Per Thousa nd Each 729 172.00 14-1-16 Each 288 0 288.00 Each 163 29. tube & Switchgears with continuous earth wire erected & dismantled without scaffolding upto three days. mains and Switchgears with continuous earth wire erected and dismantled. with using scaffolding and maintaining the same upto three days.00 14-1-18 Each 362 0 362.01 187. holders.00 14-1-19 Each 362 31.67 394.08 901.2 to 16V with holders.. holders. Temporary illumination consisting of Metal Halide flood light fitting 250 W complete with lamp. Temporary illumination wrapping of coloured gelatin paper to 40 W.01 204. Providing & fixing rotating machine to give running effect to strips lights & miniature lights upto a load of 5000 W either mechanical cum electrical or electronics complete with mains & Switchgears with continuous earth wire and dismantling upto three days.2 to 16V with holders.5 26. Temporary illumination consisting of Metal Halide flood light fitting 400 W complete with lamp. bulbs.51 410. mains and Switchgears erected and dismantled with rotor effect as approved without scaffolding upto three days. Temporary illumination consisting of white/colour series lights 50 Nos.56 196. Switchgears with continuous earthing maintaining the same during the function and including dismantling for three days. mains and Switchgears with continuous earth wire erected and dismantled.00 Each 26 14.00 14-1-14 Each 332 47. bulbs.00 14-1-20 Each 16 9.14-1-1 14-1-2 14-1-3 14-1-4 14-1-5 14-1-6 14-1-7 14-1-8 14-1-9 14-1-10 14-1-11 Temporary illumination consisting of strip lights consist of 50 bulbs 25W each in strip complete with holders. without using scaffolding upto three days.45 34.15 1016. Rental charges for supplying & maintaining 440V. mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector.00 14-2-4 Per Day 5803 573. 5)For item no 15. Per Day 13114 573.6 1343. C.00 14-2-5 Per Day 5357 429. for three days. 7 3.25 6376.1.00 Each 346 0 346. 1) Rates for item no 15. mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector. mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector.25 11079.C.14-1-21 14-1-22 14-1-23 14-1-24 14-1-25 14-1-26 14-1-27 (New) 14-1-28 (New) Note :- Providing 1.00 14-2-3 Per Day 8351 573. 50 cycles A. Rental charges for supplying & maintaining 440V. C. Switchgears erected and dismantled without using scaffolding and maintaining the same upto three days. generating set 125 kVA capacity with necessary fuel. switchgear and continuous earthing maintaining the same during the function and including dismantling. 50 cycles A.00 Mtr.00 Each 5000 0 5000.1.. mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector. C. Each 2599 321. 2) For item no 15. C.25 the rates are for period of 3 days function which includes prepatory period with testing and connecting. 3) For each additional day after 3 days but not exceeding 15 days. for three days.5 Ton capacity window Air conditioning unit complete with temporary frame and fabrication work and required material to achieve cooling temperature connected along with necessary mains. Providing 280 liters capacity Refrigerator complete with M. generating set 25 to 40 kVA capacity with necessary fuel. add 25 % per day.S.17 10. Providing 6V/10V with 20/40 Watt fluorescent emergency lamp connected with necessary mains switchgear and continuous earthing maintaining the same during the function and including dismantling.e. add 5 % per day but total rental charge shall be limited to 80 % of full rate of completed item. 50 cycles A. Rental charges for supplying & maintaining 230/440 V. Providing 20"/24" colour Television with multi channel tuner. Providing 120/150 liter capacity water cooler with water filter (Candle type or UV tube) with M. switchgear and maintaining the same during the function including dismantling.1 to 15.2 Hiring of Generators (TE-DG) 14-2-1 Rental charges for supplying & maintaining 440V. generating set 50/62.1.16 to 15. 50 cycles A.00 14. period of 1 day whichever is more including transportation. Temporary illumination consisting of Round LED / neon flex LED / flexible strip LED having 2 to 5 W capacity per meter and consisting suitable power adaptor with mains. stand if necessary connected with main switchgear and continuous earthing maintaining the same during the function and including dismantling. Rental charges for supplying & maintaining 440V.11 9.00 Each 551 78. 4) For additional (i. connected with necessary mains switchgear with continuous earthing maintaining the same during the function and including dismantling. generating set 75 to 100 kVA capacity with necessary fuel.15 3862.12 629. 7 2. Providing Digital projector with spring loaded white screen connected with necessary mains.00 Each 1028 314.99 2921. connections with project operator till completion of function. generating set 3 to 10 kVA capacity with necessary fuel. for three days.00 Each 132 0 132. Temporary illumination consisting of Round LED / neon flex LED / flexible strip LED having 2 to 5 W capacity per meter and consisting suitable power adaptor with mains.00 Mtr.00 14-2-2 Per Day 10506 573.1.25 8924. mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector. stand complete with minor plumbing work if necessary connected with mains switchgear and continuous earthing maintaining the same during the function and including dismantling. 50 cycles A.5 kVA capacity with necessary fuel.00 . generating set 11 to 25 kVA (excluding 25 kVA) capacity with necessary fuel.26 the rates of projector for 1 function or for max. commissioning & maintaining in healthy condition with transportation.1. 50 cycles A.00 14-2-6 Per Day 3575 287.67 5787. Rental charges for supplying & maintaining 440V. C. for three days. for three days. Switchgears erected and dismantled with using scaffolding and maintaining the same upto three days. mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector.15 are for period of 3 days function which includes prepatory period with testing if any required and transportation.S. after for 3+15) days.25 13687. 1 Siren & Accessories (SRN) 15-1-1 Supplying and erecting weather shade for covering siren motor. 0 554.00 Chapter 16 : CIVIL WORK (CW) 16.00 15-1-11 Each 11591 555. Dismantling the existing Siren motor from the location lowering from terrace to ground and loading and unloading for workshop.00 36.if painted with special thinner and epoxy paint. Each 4019 498.01 82. 2) The rates of I No. As per specification no.2 cm thick hard rubber sheet packing provided in between the foundation and motor base to minimise the jerks and vibration to the slab with teak wood frame etc. and no additional amount shall be paid for that.41 140.1 Excavation (EXN) Making trench in soft soil of suitable width and depth for laying provided L. pipes & clearing the site by removing debris & making the site good.00 16-1-4 Cum.89 491. C. the DG Set is to be used continuously on load. complete. range Siren 440 Volts 3 phase horizontal double mounting type 5 H.00 44 38.P. CW-EXN-CTR 16-1-1 16-1-2 Making the trench in Hard murum/Tar road of suitable width and depth for laying provided L. SRN-AS/WS Add Rs 675/.00 15-1-12 Each 399 191. Transportation of siren motor from site to workshop and back. foundation (1:2:4) with plastering for Siren motor of size 60 cms. X 60 cms.00 Chapter 15 : SIREN (SRN) 15. For subsequent five days. Supplying & erecting of 8 km. mains Switchgears and accessories complete with continuous running on load/no load as per requirements with necessary certificate from Electrical Inspector.T. 3) The above rates does not include preparatory & testing period.C.) by chiseling for preparing pit for poles stay or earth plates or for laying cables.T. cable up to 10sq. pipes & clearing the site by removing debris & making the site good.96 132. CW-EXN-CTR Excavating hard Rock or bituminous road (B.01 126.T cable of 25 sq.00 492.00 Note :- . As per specification no.56 35.) by chiselling for preparing pit for poles stay or earth plates or for laying cables. blower and iron foundation completely and painting the same by one coat of red oxide and two coats of approved color superior quality epoxy paint.per meter for laying additional cable by the side in the same trench with additional bricks cover.25 km range Siren single phase 220/250 Volts Horizontal double mounting type 1/2 HP 6000 RPM 50 cycles A.24 554.52 1740. 1) Add Rs.T cable up to 10 sq. the above rates shall be reduced by 10 %. As per specification no.00 Note :15-1-2 15-1-3 15-1-4 15-1-5 Each Per Km.3 12146. Mtr. Deleted Replacing the existing unservicable worn-out bearing by new ‘SKF’ bearings for heavy duty Siren motor. 0 131.3 51119. 0 140. made of 1.00 16-1-6 Cum.00 15-1-10 Each 50564 555. X 20 cm. with adjustable foundation. generating set 1 to 2 kVA capacity with necessary fuel. 4) The above rates are for function with on load working of DG Set upto 5 hours per day. 2800 RPM 50 cycles A.00 15-1-6 15-1-7 15-1-8 15-1-9 Each 415 15. CW-EXN-CTR Making the trench in Hard murum/Tar road of suitable width and depth for laying provided L. 15-2-1 to 15-2-7 does not include transportation.00 Each Each 634 362 76. Each Each 0 0 0 814 427.mm.As per specification No. As per specification No.00 489.25mm (18 SWG) M.96 191.C. Excavating Hard Murum/metal road (B.mm.00 16-1-5 Cum. As per specification No.14-2-7 Note :- Rental charges for supplying & maintaining 230V. SRNAS/PTG Supplying and fixing superior quality metallastic antivibration rubber mounting to Siren.00 16-1-3 Mtr. SRN-AS/SM Supplying & erecting of 3. 5)The above rates are only for function purpose Per Day 1597 142. 130 116.S sheet / PVC/ FRP sheet duly painted as per specification No. SRN-AS/SM Providing in position C. Scrapping existing paint of Siren motor.13 246.complete.68 710. 20/. complete with adjustable foundation. cleaning the surface & applying two coats of epoxy air dry paint (anticorrosive) of approved colour mixed in special type thinner complete.84 431. 1) Above rates are applicable for First day.08 428. 44 35. mm & above and covered with Half round hume pipe complete.or for more than five days this item shall not be operated. pipes & clearing the site by removing debris & making the site good.89 80. Excavating soft Murum/Soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables. and if. 50 cycles A. (For Municipal Corporation Area Only) Re-erecting the siren motor duly lifting at site and connected with assembly of existing siren by proper alignment.T.00 1005.C. with foundation nuts and bolts of required size & strength of the terrace of the building with 1.08 590.29 4517. testing and giving test trial as original Scrapping the existing paint of outer surface. (for 6 m pole) Providing cement concrete foundation including excavation for the poles 60 cms. foundation nut bolts etc in an approved manner.25”x3”) at work (100 Bricks) Providing and spreading stone metal 25mm size for 100 mm depth above the ground level.5 x 1. x 1. foundation nut bolts etc in an approved manner. stone metal) and 45 cm x 45 cm x 45 cm /45 cm. 10. height plinth duly plastered and with necessary curing and finishing in an approved manner.00 16-3-9 Each 25520 3815.20 cement concrete foundation suitable for 9 m octagonal pole considering the safe soil bearing capacity at site as 10 T/sq m at 2 meter depth including excavation. foundation nut bolts etc in an approved manner.5 m in size with necessary excavation in ground at the bottom with 150 mm.00 16-3-3 Each 1964 404.2 Mtr.20 cement concrete foundation suitable for 16 m high mast considering the safe soil bearing capacity at site as 10 T/sq m at 2 meter depth including excavation.) deep in 1:3:6 cement concrete (20 to 25 mm stone metal) and 45 cm x 45 cm.47 3823.m Each 320 85 280 1000 21.5 m high mast considering the safe soil bearing capacity at site as 10 T/sq m at 2 meter depth including excavation.00 16-2-3 16-2-4 16-2-5 16-2-6 cu.00 301. In case of half round pipe is provided by making trench in soft soil reduce rate by Rs. Designing & casting M. x 45 cm. Providing cement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm.00 .27 18226.00 16-3-8 Each 15852 2374.C.2) For cables above 10 sq.3 meter concrete for top & bottom) if excess height is required to maintain ground clearance as per IE Rule add Rs 300/. (for above 9 m poles) Providing Cement concrete foundation for pump in 1:2:4 with required size and length of foundation bolts and nuts (cost with wooden box is included).00 16-3-6 Cum.5 x 1. x 45 cms. dia. height plinth duly plastered and with necessary curing and finishing in an approved manner.2 meter height plinth (including 0.3 C. Providing burnt brick masonry with 1:6 ratio cement concrete duly plastered including watering./45 cm.98 7791.m Sqm.00 16. 16.11 5. height plinth duly plastered and with necessary curing and finishing in an approved manner.01 14530.43 1824.33 2368.5 mtr. thick 1:2:4 cement concrete raft at the bottom and top and 225 mm. Designing & casting M.5 mtr. x 45 cm.20 cement concrete foundation suitable for 20 m high mast considering the safe soil bearing capacity at site as 10 T/sq m at 2 meter depth including excavation. 1805 680.3 1030.20 cement concrete foundation suitable for 12. stone metal duly plastered with necessary curing for pole muffing or any other purposes.93 2486. 2801 577. The above rates are for 1. Foundation 16-3-1 Providing cement concrete foundation including excavation for the poles (45 cms.28 21. x 1. streaking joint on exposed faces.16 2013.C.5 m deep in 1:3:6 cement concrete (20x25mm.for 100 mm or part thereof.00 16-3-2 Each 1669 344. foundation including excavation for stay 60 cm x 60 cm x 1.stone metal) with necessary curing and finishing in an approved manner. Supplying and erecting RCC chamber cover of size 750 mm x 750 mm x 50mm thick with lifting arrangment including laying of angle iron frame of angle size as 50 x 50 x6 mm to be fixed/embeded on top of chamber. x 45 cm.47 3378. x 60 cms. stone metal) and 45 cm x 45 cm x 45 cm /45 cm. mtr Each 1513 577.2 Masonry work 16-2-1 Providing transformer plinth 1. dia. dia. x 1. mm bricks be laid on the cable width wise & overall rate shall be increased by 25%.3 29335. Each 5119 2671.00 16-3-10 Each 32911 5132.00 16-3-7 Each 12805 1725. Providing C. x 45 cm.00 1042.81 38044.00 16-3-4 3246 cu. Providing and spreading Screened Sand at site. Designing & casting M. Supplying & arranging properly burnt & necessary cured Bricks for varies purposes (Table size 9”x4.23 341.00 from overall rate of Item 17-1-3. rocking at joint on exposed faces and watering complete. deep in 1:3:6 cement concrete (20 x 25 mm.00 Note :- 16-2-2 Cum.00 90.11 42. complete. (for 8. Each 854 176. duly plastered 20 mm thick outside including watering etc.5 to 9 m poles) Providing cement concrete foundation including excavation for the poles 60 cms. foundation nut bolts etc in an approved manner. deep in 1:3:6 cement concrete (20 x 25 mm. x 60 cms. cu. thick wall constructed in stone masanory and remaining hallow portion shall be filled in by 1:5:10 cement concrete.00 16-3-5 311. Designing & casting M. 28 26. in approved manner. CW-PLB/GP Mtr.72 13. Scrapping the existing paint and painting of steel tubular / rail / RSJ pole above 6. 29 38 452 355 1449 2283 79 26.2 m depth. As per specification No. Mtr. etc. Painting identification number on fittings / equipments with removal and refitting of covers. iron work and doors from both sides with one coat of red oxide & two coats of aluminium paint. Each 7131 878. As per specification No.00 16-4-2 Mtr.I. in approved manner.61 13.5 Plumbing (PLB) 16-5-1 16-5-2 16-5-3 Supplying and erecting G. As per specification No.84 505. CW-PTG/PLD1 Painting lift door of collapsible type complete.00 16-4-11 181 26. if required.1 6408. 87 107 152 11. CW-PTG/PFT Scrapping existing paint & Spray painting of fluorescent fitting with flat reflector for 2x4' FTL completely. Each 16950 2319. As per specification No. by marker of indelible ink / enamel paint with the help of ladders.00 Note :- Rate of c c foundation for Conical pole of 9 m long shall be as per rate of Item No 16-3-7 16.39 26. CW-PTG/PFT Spray Painting of Panel type lift doors of MS complete. As per specification No. CW-PTG/PDT Painting fencing of transformer sub station including all supports.04 213. CW-PTG/PDT Spray painting of distribution transformer above 200 kVA capacity complete. ‘B’ class at position with accessories.00 166.00 16-4-14 Each 3 4.22 7. including excavation. 451 53. at 2 m depth.39 54.95 42. foundation nuts & bolts.00 2195. Scrapping existing paint & Spray painting of Industrial typefluorescent fitting with flat reflector for 2x4' FTL completely.00 16-3-12 (New) Designing and Casting M 20 cement concrete foundation suitable for Conical/Octagonal poles for 7 & 8 m long considering the safe soil bearing capacity at site as T/sq m..I.38 853.(The square meter area of fencing shall be considered for measurement purpose. tubes etc.84 93. CW-PTG/PFT Each 66 34.01 26. including excavation.00 16-3-13 (New) Designing and Casting M 20 cement concrete foundation suitable for Conical/Octagonal poles for 10 to 12 m long considering the safe soil bearing capacity at site as T/sq m.34 8009. As per specification no.pipe 20 mm dia.00 16.00 121. As per specification No.4 Painting (PTG) 16-4-1 Scrapping existing paint & Spray painting the table fan / pedestal fan / cabin fan / ceiling fan / exhaust fan including guards etc As per specification No. CW-PTG/PLD2 Spray painting of distribution transformer upto 200 kVA capacity complete.00 16-4-12 Sqm. Mtr.16-3-11 (New) Designing and Casting M 20 cement concrete foundation suitable for Conical/Octagonal poles up to 6 m long considering the safe soil bearing capacity at site as T/sq m.. dia. ‘B’ class at position with accessories. CW-PLB/GP Supplying and erecting ISI mark G.pipe 25 mm.) Scrapping existing paint of feeder pillar / switchgears (only outside) and frame of panel board completely without damaging and painting the same with single coat of Red oxide & two coats of apporved quality enamel paint in an approved manner. 238 53.84 292.00 568. Providing Epoxy painting on both side of approved colour shade of provided iron work / MS / CRCA sheet steel work complete along with antirust treatment in an approved manner.. at 1. at 1.pipe 15 mm dia. foundation nuts & bolts.00 16-4-13 Sqm.37 19269. As per specification No.5 m depth.00 16-4-15 Each 58 34. if necessary.84 101. etc.00 3136. foundation nuts & bolts. Each 5705 703.39 266.39 207. in approved manner. including excavation.00 105.00 64. CW-PLB/GP Supplying and erecting ISI mark G.0 m length along with street light / pole brackets / clamps completely as per specification No CW -PTG/PTP.72 99. in an approved manner as per direction. (The square metre area of angle iron frame on which the switchgears are erected shall be considered for measurement purpose) Providing powder coating of approved colour shade on both sides of provided iron work / MS / CRCA sheet steel work complete including antirust treatment in an approved manner. 24 17.00 16-4-4 16-4-5 16-4-6 16-4-7 16-4-8 16-4-9 16-4-10 Each Each Each Each Job Job Per sqm of fencing Sqm. Scrapping existing paint & Spray painting of fluorescent fitting with flat reflector for 1x4' FTL completely.I.39 55.‘B’ class at position with accessories. CW-PTG/PTF Scrapping the existing paint and painting of pipe pole upto 6 m length along with street light / pole brackets / clamps completely as per specification No CW -PTG/PTP. As per specification no.00 16-4-3 Mtr.00 718.25 746.00 . As per specification No. etc. 00 16. gun metal sluice valve at position with necessary materials. Supplying and erecting high density polythene pipe ISI mark 40 mm 2 dia.89 54. Supplying and erecting 40mm dia. dia. cast iron foot valve at position with necessary materials.I.9 27.73 13. pipe 32 mm.00 7299.72 15.00 487. As per specification No. pipe 50 mm.45 35.00 1102. dia ‘C” class at position with accessories.pipe 100 mm dia. As per specification No. CW-PLB/GP Supplying and erecting ISI mark G.00 530. CW-PLB/GP Supplying and erecting ISI mark G.73 32. ‘B’ ‘B’ class at position with accessories. Supplying and erecting 50mm dia. Mtr.00 Mtr. CW-PLB/GP Supplying and erecting ISI mark G. Supplying and erecting 40 mm.00 1208. 76 15.00 Mtr.84 15. gun metal sluice valve at position with necessary materials.73 15. Gun metal foot valve at position with necessary materials.89 261. Supplying and erecting 100mm dia.9 54. As per specification No.84 206.00 276. As per specification No.00 670.00 869. Supplying and erecting 25mm dia.89 54. CW-PLB/GP Supplying and erecting ISI mark G.00 2351. pipe 65 mm.00 443.6 Plumbing Accessories 16-6-1 16-6-2 16-6-3 16-6-4 16-6-5 16-6-6 16-6-7 16-6-8 16-6-9 16-6-10 16-6-11 16-6-12 16-6-13 16-6-14 16-6-15 16-6-16 16-6-17 16-6-18 16-6-19 16-6-20 16-6-21 Supplying and erecting 25mm dia.00 1713.00 175. gun metal sluice valve at position with necessary materials.9 54. CW-PLB/GP Supplying and erecting ISI mark G.45 27.00 3911. Mtr. Mtr.I. Supplying and erecting 75/80mm dia. dia. ‘B’ class at position with accessories.pipe 40 mm.45 35. Mtr. cast iron foot valve at position with necessary materials. CW-PLB/GP Supplying and erecting ISI mark G. As per specification No. Supplying and erecting 50mm dia.00 3246. cast iron foot valve at position with necessary materials. As per specification No.I.00 974. dia ‘C” class at position with accessories.00 1092. 192 223 312 428 560 836 221 260 356 485 637 941 51 13.00 822. Supplying and erecting 65mm dia. CW-PLB/GP Supplying and erecting ISI mark G. Supplying and erecting 75/80mm dia.00 327.00 372.9 54.9 54.00 1028.45 27.78 32. CW-PLB/GP Supplying and erecting ISI mark G. CW-PLB/GP Supplying and erecting ISI mark G.84 15. gun metal sluice valve at position with necessary materials.45 35. As per specification No.00 335. 116 15.00 594. Gun metal foot valve at position with necessary materials.I. suitable for pressure of 6 kg/cm connected to Jet/Submersible pump with required material complete. As per specification No. Supplying and erecting 65mm dia. suitable for pressure of 6 Kg. As per specification No.84 92.84 132.pipe 75/80 mm dia. Supplying and erecting 100mm dia. gun metal sluice valve at position with necessary materials.9 54. As per specification No. Supplying and erecting 65mm dia. pipe 40 mm. Supplying and erecting Non return valve 50mm dia in position made of gun metal. CW-PLB/GP Supplying and erecting high density polythene pipe ISI mark 32 mm 2 dia.I.45 27. pipe 75/80 mm dia ‘C” class position with accessories. Mtr. Supplying and erecting 40mm dia. Supplying and erecting 50mm dia.78 14. Gun metal foot valve at position with necessary materials.I. / Cm2 connected to Jet/Submersible pump with required material complete. cast iron foot valve at position with necessary materials. suitable for pressure of 6 kg/cm connected to Jet/Submersible pump with required material complete.72 14. Gun metal foot valve at position with necessary materials. dia. gun metal sluice valve at position with necessary materials. dia ‘C” class position with accessories. Mtr. Supplying and erecting high density polythene pipe ISI mark 50 mm.84 32.9 54. cast iron foot valve at position with necessary materials.00 235. Supplying and erecting Non return valve 40mm dia in position made of gun metal. Gun metal foot valve at position with necessary materials. dia ‘C” class position with accessories.pipe 65 mm.‘B’ class at position with accessories.‘B’ class at position with accessories.00 799. Supplying and erecting Non return valve 25mm dia in position made of gun metal. pipe 100 mm dia ‘C” class position with accessories. Supplying and erecting 100mm dia. Mtr.I. Mtr.I. Mtr.16-5-4 16-5-5 16-5-6 16-5-7 16-5-8 16-5-9 16-5-10 16-5-11 16-5-12 16-5-13 16-5-14 16-5-15 16-5-16 16-5-17 16-5-18 Supplying and erecting ISI mark G.00 593.00 . cast iron foot valve at position with necessary materials. CW-PLB/GP Supplying and erecting ISI mark G. dia.9 27.I. Mtr. Mtr. Mtr.I.73 32.00 67.9 27.pipe 32 mm dia.78 14.I. Gun metal foot valve at position with necessary materials.00 491.45 27.I. ‘B’ class at position with accessories. Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each 234 400 494 973 1412 2296 148 308 455 767 1153 2529 567 1065 1677 3191 3856 7244 460 772 1066 27. CW-PLB/GP Supplying and erecting ISI mark G.00 1467. ‘B’ class at position with accessories.00 2584. Supplying and erecting 25mm dia. As per specification No. Supplying and erecting 75/80mm dia.89 54. Mtr.pipe 50 mm dia.00 427. As per specification No.45 35.00 238.00 501. screws etc.32 4461.00 219.00 4975. leaded fin bronze (IS:318) FRP seat.Stainer Complete Supplying and erecting 65mm dia. body lined from inside with FRP and synthetic rubber coated (reinforced) ball. overhauling with minor repairs. screws etc. leaded fin bronze (IS:318) FRP seat. ball type foot valve having C. dia with necessary nuts bolts and washers with rubber seal in position.00 93.Stainer Complete Supplying and erecting 100mm dia. Supplying and erecting C. bush bearing.63 741. screws etc. condensor.9 11./M. replacing ball bearing.&testing for original speed and consumption with guarantee for 1 year including transportation from site and back Rewinding the motor of the ceiling fan 900mm of all types and makes and over hauling including minor repairs replacing ball bearings. bush bearing.25 947. Supplying and erecting Non return valve 75/80mm dia in position made of gun metal. flange 75/80mm. Supplying and erecting C.63 534.00 17-1-6 Each 684 155.00 17-1-3 Each 408 125.I.00 17-1-2 Each 408 125.I.53 1793.I. flange 100mm. screws etc.00 78. carbon steel (IS:1363 class 4) fastners.00 98. condensor.S.43 2440. C. flange 65mm. leaded fin bronze (IS:318) FRP seat.I. body lined from inside with FRP and synthetic rubber coated (reinforced) ball. carbon steel (IS:1363 class 4) fastners. Supplying and erecting C. & testing for original speed and consumption with guarantee for one year Rewinding the motor of the Exhaust fan 900/1400 RPM 375 mm of all types and makes and over hauling including minor repairs.84 109.P./M.19 839.00 Each 4133 328.1 Rewinding 17-1-1 Rewinding the motor of table / pedastal / wall bracket / cabin fans of all type and makes including minor repairs replacing ball bearings.Stainer Complete Supplying and erecting 50mm dia. pipe.I. bush bearing. Item No. bush bearing. leaded fin bronze (IS:318) FRP seat.61 17.9 54.00 17-1-5 Each 615 125.95 15. body lined from inside with FRP and synthetic rubber coated (reinforced) ball. & testing for original speed and consumption with guarantee for one year.I. screws etc.I./M. body lined from inside with FRP and synthetic rubber coated (reinforced) ball.I. Supplying and erecting C./M.I. dia with necessary nuts bolts and washers with rubber seal in position. flange 25mm dia with necessary nuts bolts and washers with rubber seal in position.I. condensor.I. Supplying and erecting C. Supplying and erecting C.& testing for original speed and consumption with guarantee for one year.00 Each 1574 218. & testing for original speed and consumption with guarantee for one year Rewinding the motor of the Exhaust fan 900/1400 RPM 450 mm of all types and makes and over hauling including minor repairs.00 Chapter 17 : MISCELLANEOUS (MSC) 17. ball type foot valve having C. Job 408 106.63 515.63 1242. C. condensor.I. carbon steel (IS:1363 class 4) fastners. dia with necessary nuts bolts and washers with rubber seal in position. inch pressure gauge having 4" dia complete with socket for 1/2" G.63 568.00 Note :- . 18-1-7 is for rewinding of motors other than table / pedastal / cabin / wall mounting / ceiling / Exhaust fan.I. Supplying and erecting 0-100 lb/sq.61 11. & testing for original speed and consumption with guarantee for one year Rewinding of electric motor upto 1H. ball type foot valve having C.Stainer Complete Each Each Each Each Each Each Each Each Each Each Each 2022 2568 4920 61 66 81 86 101 201 352 770 54.79 2077. testing for the original speed and no load consumption with guarantee for one year.00 2623. bush bearing.00 880. single phase upto 1400 RPM of all types and makes with copper wire. ball type foot valve having C. screws etc.00 73.S.00 17-1-4 Each 442 125.I. bush bearing. flange 50mm. C.61 11./M.00 119. bush bearing. screws etc.I.63 534.9 54. condensor. body lined from inside with FRP and synthetic rubber coated (reinforced) ball. Supplying and erecting Non return valve 100mm dia in position made of gun metal.00 Each 2167 273.I.S. replacing ball bearing. ball type foot valve having C. C. carbon steel (IS:1363 class 4) fastners.S.00 368. flange 40mm dia with necessary nuts bolts and washers with rubber seal in position. leaded fin bronze (IS:318) FRP seat. replacing ball bearing.00 17-1-7 Each 715 232.61 11.I. condensor. C. Supplying and erecting 40mm dia. replacing ball bearing.dia with necessary nuts bolts and washers with rubber seal in position.S. Rewinding the motor of the ceiling fan 1200 mm / 1400 mm of all types and makes and over hauling including minor repairs replacing ball bearing.16-6-22 16-6-23 16-6-24 16-6-25 16-6-26 16-6-27 16-6-28 16-6-29 16-6-30 16-6-31 16-6-32 16-6-33 16-6-34 16-6-35 16-6-36 Supplying and erecting Non return valve 65mm dia in position made of gun metal. Rewinding the motor of the Exhaust fan 900 / 1400 RPM 300 mm of all types and makes and over hauling including minor repairs.Stainer Complete Supplying and erecting 75/80mm dia.95 17.00 Each 1078 163. carbon steel (IS:1363 class 4) fastners. Replacing the existing bearing of approved make for electric motor 15H.P. bush bearing. screws etc.P.33 14. & 12.00 Each 3576 533. screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 5 H.P with coated copper wires & overhauling with minor repairs. bush bearing.2 Replacement 17-2-1 Replacing the existing bearing of approved make for electric motor A. overhauling with minor repairs. 2) Rates for rewinding of 2800/ 2900 RPM motors. ring.01 76.3 Accessories 17-3-1 Filtration of Transformer oil on site till satisfactory test results. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 20 H. bush bearing. H.P.00 Each 3082 420. bush bearing. 1309 441.81 1421.P. replacing ball bearing.P.00 17-2-3 17-2-4 17-2-5 17-2-6 17-2-7 17-2-8 17-2-9 Note :- Each Each Each Each Each Each Each 445 616 1059 148 50 29 41 76. overhauling with minor repairs. screws etc.C electric motor 3 phase 2 H.73 25.P. bush bearing. Replacing the existing Bush/ rubber.00 17.81 1865.84 7217. and no load consumption & guarantee for one year.P. replacing ball bearing. overhauling with minor repairs. Each 1216 204. 1) Above rates are applicable for replacement of bearing only. screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 3 H. upto 15 H.00 692. Each 213 51. & 7. testing for the original speed and no load consumption with guarantee for one year Rewinding of submersible pump motor of all types and makes upto and including 5 HP with coated copper wires & overhauling with minor repairs.three phase upto 1400 RPM of all types and makes with copper wire. screws etc.5 H.73 341. replacing ball bearing. overhauling with minor repairs.33 6.00 47. Rewinding of submersible pump motor of all types and makes above 5 H. replacing ball bearing. of all types with due alignment of the shaft and tested.00 Each 1660 204. replacing ball bearing.00 Each 1798 243. bush bearing.P.17 3502. replacing ball bearing.93 6092. Liter 8 6. H.P.34 6. three phase upto 1400 RPM of all types and makes with copper wire. Replacing the existing bearing of approved make for A.00 Each 6329 887. bush bearing.13 4109. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 10 H. screws etc.5 H.28 1750. replacing ball bearing. Replacing the existing capacitor of 4 microfarad for all types of fittings complete with wiring. bush bearing.00 Each 3857 557.5 H.P.00 . replacing ball bearing.33 521.P. three phase upto 1400 RPM of all types and makes with copper wire. testing for the original speed and no load consumption with guarantee for one year.P. to 3 H. Replacing the existing capacitor of 2. screws etc.P.P. Rewinding of electric motor upto 2 H.08 5156. overhauling with minor repairs. overhauling with minor repairs. screws etc. testing for the original speed. of all types with due alignment of the shaft and tested. overhauling with minor repairs.00 H. of all types with due alignment of the shaft and tested. shall be decreased by 5%.00 35.00 200. bush bearing.P.87 2042. screws etc.00 1160.00 H.C single phase / 3 phase upto 1 H.17-1-8 17-1-9 17-1-10 17-1-11 17-1-12 17-1-13 17-1-14 17-1-15 17-1-16 17-1-17 17-1-18 Note :- Rewinding of electric motor upto 1H. of all types with due alignment of the shaft and tested.73 265.P.28 1510. three phase upto 1400 RPM of all types and makes with copper wire.00 17. of all types with due alignment of the shaft and tested. replacing ball bearing. three phase upto 1400 RPM of all types and makes with copper wire. bush bearing.00 75. Replacing the existing bearing of approved make for electric motor 10 H.P. and no load consumption & guarantee for one year. 1069 441. overhauling with minor repairs. three phase upto 1400 RPM of all types and makes with copper wire. 3) The dismantled material shall be retained by the contractor.01 101.P.P.P.5 H. three phase upto 1400 RPM of all types and makes with copper wire. screws etc.00 Each 4548 608. 1) Burnt ceiling fans and motor older than 10 yrs shall not be rewound.to 20 H. overhauling with minor repairs. three phase upto 1400 RPM of all types and makes with copper wire.P. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 12.P. replacing ball bearing.P. washers of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & tested. bush bearing.5 microfarad for all types of fan complete with wiring.00 Each 5354 737.41 4414.00 17-2-2 Each 289 51. replacing ball bearing. screws etc. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 15 H.35 51. Replacing the existing bearing of approved make for electric motor 5 H. Replacing the existing ball bearing of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & tested. three phase upto 1400 RPM of all types and makes with copper wire. testing for the original speed. testing for the original speed and no load consumption with guarantee for one year Rewinding of electric motor upto 7. Bracket fan.00 25.00 10.P.00 5. repairing by provided necessary material.24 51.00 258.00 1452. Lift Ropes / Belt types / Appliances & equipments All type of Hot water Boilers All type of Electric motor All type of Water pumpset.00 2000.S/G.00 Each 0 71. Supplying & erecting thermal timer HT 2000 L&T make above 30 H.00 2100.cable & wire (Copper) Allum.00 62. /feeder piller etc. finding the fault.P.motor Supplying and erecting No-Volt-Coil L&T make of type ML-4 above 30 H.73 51.B.P.00 340./ T.00 771.cable & wire (Allum) PVC arm/unarm. All type of Chokes / condensor / small coils / motor starter etc.5 H. / D. to 30 H. Replacing suitable capacity motor of water pump of air cooler of any capacity and type in lieu of old one.00 881. Liter Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each 154 206 562 829 827 1390 2062 719 1600 1789 860 1583 3226 4362 7101 50 9. if any.P.Metalic Matrials / Pole etc.00 50.73 51.5 or suitable from MN series for motor starter suitable from 15 H.00 614.C. finding the fault.00 1652.P.00 13.C.C.5 H.00 500. repairing by provided necessary material. Supplying and erecting thermal over load relay L&T make MK-2 / ML-3 for motor starter above 30 H. Copper /Brass materials Wooden Materials PVC Pipe / PVC Materials Paper Cartoons & Paper Boxes.00 Chapter 18 : Dismantled Items 18-1-1 18-1-2 18-1-3 18-1-4 18-1-5 18-1-6 18-1-7 18-1-8 18-1-9 18-1-10 18-1-11 18-1-12 18-1-13 18-1-14 18-1-15 18-1-16 18-1-17 18-1-18 18-1-19 18-1-20 18-1-21 18-1-22 18-1-23 18-1-24 18-1-25 18-1-26 18-1-27 18-1-28 18-1-29 PVC arm/unarm.73 51.unit. if any.00 138.C compressor All type of A.73 51.unit. kg kg kg kg kg kg kg kg kg kg Each Each Each Each Each kg kg kg Each HP HP T/R T/R T/R Each kg Each Liter Each 11 50 62 25 138 5 5 4 13 25 1300 150 500 21 100 11 17 20 400 340 340 500 2000 2100 800 135 900 10 1452 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11.73 51. to 60 H. Supplying & erecting L&T make timer for MK-1 motor starter suitable from upto 12.00 17. Fitting / S.P.I. Switches/ D.P.H.C.to 60 H.5 H.P.C.00 Each Each 464 0 51. Supplying and erecting contactor L&T make ML2 or suitable from MN series for motor starter suitable above 30 HP to 60 HP Supplying and erecting contactor L&T make ML-3 or suitable from MN series for motor starter suitablefrom 40 HP to 50 HP Supplying and erecting contactor L&T make ML-4 or suitable from MN series for motor starter suitable from 60 HP to 75 HP.P.00 400.P.73 51. to 30 H.00 20.00 100.73 51.B.00 4878.00 912.P.00 1635.5 for motor starter 15 H.V.00 879.V.00 1841. and putting into beneficial use with necessary Tools & Tackles.B All type of ceiling fan.00 .00 36.00 800. and putting into beneficial use with necessary Tools & Tackles.01 164. Metalic Matrials HG / M.00 1300.73 51.P.00 2114. Supplying and erecting No-Volt-Coil L&T make for motor starters upto 12. Checking the existing outdoor faulty fitting.B/ V.17-3-2 17-3-3 17-3-4 17-3-5 17-3-6 17-3-7 17-3-8 17-3-9 17-3-10 17-3-11 17-3-12 17-3-13 17-3-14 17-3-15 17-3-16 17-3-17 17-3-18 17-3-19 17-3-20 Supplying and topping up filtered transformer oil of approved make with test certificate.73 51.00 3278. All type of Air circulator and pedastal type Air circulator (New Proposed) All type of Fluo.P. Dismantling the existing ceiling fan of various sizes and replacing the bolt and nuts at reel insulator and at bottom of the down rod with half threaded bolt of 3/8” dia 2-1/2” to 3-1/2” long and 5/16” dia 1-3/4” to 2-1/4” long respectively required sizes with 2 plate washers with oiling. LT make for motor starter upto 12. pedastal fan and table fan.00 900.P. Tube Fitting / M.to 60 H. motor Supplying and erecting thermal Overload Relay L&T make for MK 1 motorstarter suitable for up to 12. Supplying & erecting L&T make timer for ML-2 motor starter suitable from 15 H.00 5.00 126.C.73 76. Supplying and erecting No-Volt-Coil L&T make of type ML-2 for 15 H.00 7153.73 51.C./M.Fitting All type of Geysor up to 6 KW All type of accessories such as Tube starter /Bell /Holder/ Ceiling Rose/ MCB etc.73 35.00 150./ A.(Window) All type of A.79 72. All type of Meters.P.C.) All type of O.P.P.00 1442. I. greasing and painting the date of repair and re-erecting at position.P.00 340.(Split) All type of Indoor unit of split A.5 HP Supplying and erecting thermal over load relay L&T make ML-1/ ML-1. cabin fan.73 516.00 25.(Ammeter / Voltmer ect.P to 30 H. Supplying and erecting contactor L&T make ML-1. Water cooler instant type Water cooler storage type Refrigerator upto 165 ltr. All type of A.00 135.73 51.to 30 H.00 21.5 51.C.Switches / M. Supplying & erecting contactor MK-1. Checking the existing Indoor faulty fitting.00 500. Copper piping of A.89 516.00 11.00 4. Air cooler of any size(Without Fan) Air cooler of any size(With Fan) Transformer Oil D.00 50.00 400.00 100. Exhaust fan 9" sweep.00 5.00 40. Transformer Telephone Exchange (EPABX) Telephone instrument .00 151.00 400.00 1100.18-1-30 18-1-31 18-1-32 18-1-33 18-1-34 18-1-35 18-1-36 18-1-37 18-1-38 18-1-39 18-1-40 18-1-41 18-1-42 18-1-43 18-1-44 18-1-45 18-1-46 18-1-47 18-1-48 Note :- Refrigerator above 165 ltr.00 135. Exhaust fan 15" sweep.00 50.00 330.00 800.00 450. Exhaust fan 12" sweep. Water Purifier Inverter /UPS Voltage stabilizer Amplifier small Amplifier Big Mikes Rates for Items which are not covered in above list should be calculated on the basis of material / equipments considering it's site condition and prevailing market rates and approval should be taken from concerned Superintending Engineer ( Electrical) Each Each Each Each Each Each Each Each Liter kVA kVA Each Each Each kVA kVA Each Each Each 2000 135 151 200 330 400 500 800 5 100 40 1100 50 80 50 50 400 450 70 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2000.00 80.00 70. Set.G. Exhaust fan 24" sweep.00 500.00 .00 200.00 50. Exhaust fan 18" sweep.
Copyright © 2024 DOKUMEN.SITE Inc.