Diamond Spec Guide 2014

DIAMOND® WARRANTY SHEET LIFETIME LIMITED WARRANTY Diamond® Cabinetry warrants the original consumer purchaser for as long as they own their home that the Diamond Cabinetry products will be free from defects in material and workmanship under normal use. This warranty is only applicable to products used in residential applications within the United States and is not transferable to subsequent owners. Should defects in material or workmanship exist during the applicable warranty period in any Diamond Cabinetry product, Diamond Cabinetry will elect at its discretion to either repair or replace the defective material or component, free of charge. This warranty covers only parts and materials of the products supplied by Diamond Cabinetry. Not covered under this warranty are counter tops, appliances, plumbing fixtures, etc. or the costs, including labor, to remove and reinstall materials and related components such as fittings, appliances, etc. This warranty shall become void if the cabinets are in any way modified, improperly installed or damaged prior to or during the installation. Furthermore, this warranty will not apply to cabinets damaged by misuse, neglect, abuse, acts of God, exposure to moisture, exposure to extreme temperatures or the effects of normal wear and tear. Natural woods may vary in color, characteristics and exhibit subtle changes as they age. For example, white painted face frames may eventually have visible cracking around the joint area and cabinet colors may darken or lighten over time. Sunlight, smoke, household cleaners and other environmental conditions may also affect the color match over time. These variations are considered to be the nature of the material in relation to their environmental exposure and are not covered under this warranty. Diamond Cabinetry reserves the right to alter design, specifications and material without obligation to make similar changes to products previously manufactured. The repair(s) or replacement(s) are contingent upon the current product offerings of styles and construction options within the Diamond Cabinetry products at the time of the warranty claim. If a warranty claim is filed after a Diamond Cabinetry product becomes obsolete; Diamond Cabinetry reserves the right to honor the warranty in one of the following fashions: 1. To replace the affected component with a new component of the same style. 2. To replace the affected component and any other component(s) in the residential application to achieve a uniform appearance with a similar and comparable product style of the originally purchased style. If components are replaced, Diamond Cabinetry cannot guarantee that the finish of these replacements will exactly match the finish and appearance of the components in the residential application. This is due to the changes that occur during the woods’ natural aging process, affecting its color and grain. THIS WARRANTY IS THE EXCLUSIVE WARRANTY OF DIAMOND CABINETRY AND IS IN LIEU OF AND DIAMOND CABINETRY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. To obtain replacement(s) under this limited warranty, first contact your authorized Diamond Cabinetry dealer or distributor, who will arrange for inspection of the cabinet. A dated sales receipt as proof of purchase is required to obtain benefits from this warranty. If you have difficulty obtaining assistance, please write to: MasterBrand Cabinets, Inc. Attn: Consumer Affairs, One MasterBrand Cabinets Drive, Jasper, IN 47546 Diamond® Cabinetry is a subsidiary of MasterBrand Cabinets, Inc. effective August 1, 2001 TERMS AND CONDITIONS DIAMOND® CABINETS LIFETIME LIMITED WARRANTY AND GENERAL INFORMATION Specifications in material, construction and design are subject to change without notice as conditions require, or as improvements are developed. All orders are subject to credit approval. To avoid errors, orders should be filled out on Diamond Cabinet forms. All cabinets are manufactured to individual order and cannot be cancelled or changed after manufacturing has begun. Cycle ship orders cannot be changed after the cut-off date. Returns will not be accepted without prior written authorization. Diamond cabinets carry a Lifetime Limited Warranty. This limited warranty does not cover misuse*, improper storage, improper installation, labor costs or defects incurred during installation, storage or transportation. We reserve the right to repair or replace any defective material after field inspection by our representative. For complete warranty details, please refer to the Diamond Warranty Document. A product count and inspection must be performed before signing the Bill of Lading. Shortage, obvious damage and occurrences of mishandling must be noted on the Bill of Lading before it is signed. Replacement orders must then be made with Diamond Customer Service. A signed Bill of Lading with no notations will indicate a complete and damage free shipment. Sales are only to approved, authorized accounts. Please make reference to the cabinet selection guide for information pertaining to characteristics of wood. This information will tell you the reactions that natural woods might develop under certain conditions after product is finished. DISCONTINUED PRODUCT POLICY 60 days minimum notice to reps and customers announcing the discontinuation of a product line. Product will no longer be available for order after the discontinuation date. Only warranty orders will be considered. Even with warranty orders we will have the option to replace customer’s defective product with the same discontinued product they originally purchased, or replace all doors originally ordered with a current product that is similar in appearance. Effective March 17, 2014 What’s New READ THE FOLLOWING GUIDE PAGES FOR KEY NEW PRODUCT, REVISIONS, AND DELETIONS DOOR STYLE ADDITIONS Caldera is a Full Overlay Veneer Flat Center Panel Cope and Stick door with 5-Piece Drawer Front standard and optional Slab Drawer Front (DFSLB). Available in Cherry and Maple (see page 11). Cullen is a Full Overlay Veneer Flat Center Panel Cope and Stick door with a Slab Drawer Front. Available in Cherry and Maple (see page 13). Hanlon is a Full Overlay Veneer Flat Center Panel Cope and Stick door with a Slab Drawer Front. Available in Cherry and Maple (see page 14). Leeton is a Full Overlay Veneer Flat Center Panel Beaded Mitered door with 5-Piece Drawer Front standard and optional Slab Drawer Front (DFSLB). Available in Maple (see page 15). Rothshire is a Full Overlay Veneer Flat Center Panel Miter door with a 5-Piece Drawer Front. Available in Cherry and Maple (see page 17). DRAWER FRONT CHANGES Anden: Change to 5-Piece Drawer Front standard and add optional Slab Drawer Front (DFSLB) (see page 8) Liberty: Optional 5-Piece Drawer Front (DFF5PC) (see page 15) Shiloh: Optional 5-Piece Drawer Front (DFF5PC) (see page 17) WALL CABINETS Wall Cabinets, 34″ and 37″ wide, 12″ and 24″ deep: W34**, W37**, W34**24, W37**24 (see pages 86-100) Wall Vertical Lift Cabinets: WVL****, WVL****24 (see pages 92, 93, 95, 97) Wall Shelf Pull Down Cabinets: W36**SHLFPD (see page 148) BASE CABINETS Sink Base Cabinets with CabMat™, 33″ wide: SB33CM, SB33STCM, SB33SCM, SB33STSCM, CNTYSB33CM (see pages 191-197, 203) Lazy Susan Pull-Out: LSP36 L or R (see page 213) Two Drawer Base Cabinets (drawer boxes increase to 10″ high): 2DB** (see page 216) Two Drawer Base Cabinet with Pegged Dish Organizer (drawer boxes increase to 10″ high): 2DB36PDO (see page 216) Base Built-in Microwave Cabinets with Drawer, 24″ and 30″ wide: BBMWD** (see page 228) TALL CABINETS Utility Cabinets with Roll Trays, 12″ wide: U12**24RT L or R (see pages 245, 246) Double Oven Cabinets with Warming Drawer with Extended Opening: OCD****24WDE (see pages 291-295) OFFICE CABINETS Desk Door Drawer Base Cabinets, 27″ and 33″ wide, 21″ and 24″ deep: DDO**29** (see page 318) VANITY CABINETS 18″ Deep, 34 1/2″ high Vanity Cabinets now available - 116 new SKUs (see pages 329-350) Vanity Sink Drawer Base, 60″ wide: 2VSD60****, 2VSD60****FP (see pages 339, 340) Vanity Sink Three Drawer Base, 54″ and 60″ wide: VS3D****18, VS3D****21 (see page 345) Vanity Sink Drawer Base with Six Drawers, 42″ and 54″ wide: 6VSD****18, 6VSD****21 (see pages 346-349) Vanity Hamper, 32″ high, 21″ deep: VH183221FH L or R (see page 352) Vanity Hamper with Drawer, 34 1/2″ high, 21″ deep: VBH183421 L or R (see page 352) Vanity Wall, 30″ high, 6″ deep: W24306 L or R (see page 354) WOOD HOODS Wood Hood Contemporary Straight (available in Maple, Cherry, Oak, Hickory, and Alder): JWHCONSTR** (see page 157) Effective March 17, 2014 MOULDINGS & EMBELLISHMENTS Tall Fillers in 10′ Lengths in Cherry and Maple: TF*120FH (see page 357) 102″ and 108″ Skins and Panels with Fillers available in Cherry and Maple (see pages 366, 369) 120″ Tall Skins available in Cherry and Maple (see page 366) Crown Mouldings available in 10’ lengths in Cherry and Maple: SWVCRM10, SWLCRM10, SWCRM10, SWTCRM10, SMCOVECROWN10, SCM10, SHKRCRM10, COVECROWN10, CLTCROWN10, COTCROWN10, FOLCROWN10, and INSCROWN10 (see pages 373, 374) Shaker Crown Mouldings: LSHAKER8 available in all wood types and LSHAKER10 available in Cherry and Maple (see page 373) Flat Scribe and Small Scribe Mouldings in 10’ lengths available in Cherry and Maple: SM10 and SSM10 (see pages 376, 377) Baseboards in 10’ lengths available in Cherry and Maple: BBM10 (see page 377) Product code changes for the following mouldings to designate 8′ lengths: CLTCROWN8, COTCROWN8, COVECROWN8, FOLCROWN8, INSCROWN8, SMCOVECROWN8, and SSM8 (see pages 373, 374, 377) MODIFICATION ENHANCEMENTS Matching Interior Plywood (MIP) is now standard with plywood shelves (see page 33) Toekick Drawer (DRWTK) modification now available on 21″ -23″ deep cabinets, including vanity cabinets and cabinets ordered with RD21-RD23 or ID21-ID23 (see page 42) Toekick Drawer (DRWTK) modification now available on selected 24″ deep office cabinets with standard toekick areas Authentic Ends (AUTHL/AUTHR) modification expanded to 12″ and 15″ high wall cabinets and angle wall and base cabinets without fixed shelves (see page 32) MISCELLANEOUS ADDITIONS & ENHANCEMENTS FPEB is standard on Hearth Piers and Hearth Pier Pull-outs (MIP has been removed on all except the 36″ high Hearth Pier) (see pages 166-168) DADOORHG (Horizontal Grain Center Panel) allows for wider custom sized doors in the Appliance Panel Program (see page 364) Expand the Roll Tray and Deep Roll Tray Kit accessory items to include versions for 18″ and 21″ deep cabinets (see pages 399, 400) CABMAT33 is an accessory for use with 33″ wide cabinets (see page 402) SHLFPD36 (Shelf Pull Down) is an accessory for field installation in 36″ wide wall cabinets (see page 408) TABLETHLDR (Tablet Holder) is a field installed under-cabinet accessory for using and storing tablets (see page 408) DISCONTINUED PRODUCTS Geneva Thermofoil door style Matching Interior Plywood Shelf (MIPPS) Plywood Shelf (PLYSH) Keyboard Tray (KBT2421) Effective March 17, 2014 NOTES Effective March 17, 2014 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-G Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 12-Step Finishing Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Humidification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Door Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-19 Premium Color Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Unfinished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Finish Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Finish Availability Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-24 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Construction Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27 Modification/Upgrade Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Construction Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Drawer Front Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Drawer Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Custom Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-43 Door Modification/Specialty Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-47 Decorative Glass Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-73 Cabinet Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74-79 Design Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 NKBA Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81-82 Logix™ Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83-84 Wall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85-161 Hearths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162-170 Base Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171-233 Universal Design Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234-238 Tall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239-311 Office & Furniture Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312-327 Vanity Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .328-356 Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .357-362 Appliance Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .363-365 Panels & Skins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .366-372 Moulding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .373-380 Valances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .380 Embellishments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .381-396 Cutlery Organizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .397-398 Roll Tray Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .399-400 Accessories & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .401-409 Decorative Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .405 Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .406 Replacement Doors & Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .407 Stains, Touch-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .408, 409 Sales Support Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .410 Stacked Moulding Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .411-418 Agreements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .419-421 Effective March 17, 2014 TABLE OF CONTENTS TABLE OF CONTENTS DESCRIPTION INDEX A Description Code Page Number Abbe Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acanthus Corbel. . . . . . . . . . . . . . . . . . . . . . . . . Acanthus Foot. . . . . . . . . . . . . . . . . . . . . . . . . . Acanthus Insert . . . . . . . . . . . . . . . . . . . . . . . . . Acanthus Leg . . . . . . . . . . . . . . . . . . . . . . . . . . Acanthus Light Rail Insert . . . . . . . . . . . . . . . . . . . Acanthus Moulding . . . . . . . . . . . . . . . . . . . . . . Acanthus Ornament . . . . . . . . . . . . . . . . . . . . . . Acanthus Overlay . . . . . . . . . . . . . . . . . . . . . . . Acanthus Tile . . . . . . . . . . . . . . . . . . . . . . . . . . Add Toekick . . . . . . . . . . . . . . . . . . . . . . . . . . . All Plywood Construction . . . . . . . . . . . . . . . . . . . Aluminum Frame Doors w/Frost Glass . . . . . . . . . . . Angled Corner Sink Front Bottoms . . . . . . . . . . . . . Angled Corner Sink Fronts . . . . . . . . . . . . . . . . . . Angled Corner Sinks . . . . . . . . . . . . . . . . . . . . . . Angled Fluted/Plain Fillers . . . . . . . . . . . . . . . . . . Arched Valance . . . . . . . . . . . . . . . . . . . . . . . . . Art Corbel 9″ . . . . . . . . . . . . . . . . . . . . . . . . . . Arts & Crafts Bracket. . . . . . . . . . . . . . . . . . . . . . Arts & Crafts Open Corbel . . . . . . . . . . . . . . . . . . . Asymmetrical Base Easy Reach . . . . . . . . . . . . . . . Asymmetrical Easy Reach Wall Corners . . . . . . . . . . . Asymmetrical Solid Wood Super Lazy Susan . . . . . . . Asymmetrical Super Lazy Susan w/Chrome Rail . . . . . Asymmetrical Super Susans . . . . . . . . . . . . . . . . . Authentic Ends . . . . . . . . . . . . . . . . . . . . . . . . . Back Panel Moulding . . . . . . . . . . . . . . . . . . . . . Back Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . Bar Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Baroque Corbel . . . . . . . . . . . . . . . . . . . . . . . . . Baroque Insert . . . . . . . . . . . . . . . . . . . . . . . . . Baroque Leg. . . . . . . . . . . . . . . . . . . . . . . . . . . Baroque Light Rail Insert . . . . . . . . . . . . . . . . . . . Baroque Valance . . . . . . . . . . . . . . . . . . . . . . . . Base Box Column Pull-Outs (Plain, Overlay & Fluted) . . Base Buffet . . . . . . . . . . . . . . . . . . . . . . . . . . . Base Buffet Three Drawer . . . . . . . . . . . . . . . . . . Base Buffet Three Drawer w/Deep Drawer . . . . . . . . Base Buffet w/Roll Trays . . . . . . . . . . . . . . . . . . . Base Built-In Microwave Cabinet w/Drawer . . . . . . . . Base Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . Base Cabinets Four Drawer . . . . . . . . . . . . . . . . . . Base Cabinets Four Drawer w/Cutlery Insert Wood Organizer . . . . . . . . . . . . . . . . . . . . . . Base Cabinets Four Drawer w/Wood Tiered Cutlery Divider Drawer . . . . . . . . . . . . . . . . . . . . . . . Base Cabinets Full Width w/Roll Trays & Swing-Outs. . . Base Cabinets Three Drawer . . . . . . . . . . . . . . . . . Base Cabinets Three Drawer Corner . . . . . . . . . . . . . Base Cabinets Three Drawer Special . . . . . . . . . . . . Base Cabinets Three Drawer w/Deep Drawer . . . . . . . Base Cabinets Three Drawer w/Warming Drawer . . . . . Base Cabinets Three Drawer w/Wood Tiered Cutlery Divider Drawer . . . . . . . . . . . . . . . . . . . . . . . Base Cabinets Two Drawer . . . . . . . . . . . . . . . . . . Base Cabinets Two Drawer w/Drop-In Range . . . . . . . Base Cabinets Two Drawer w/Drop-In Range & Warming Drawer . . . . . . . . . . . . . . . . . . . . . . Base Cabinets Two Drawer w/File Drawer . . . . . . . . . Base Cabinets Two Drawer w/Pegged Dish Organizer . . Base Cabinets Two Drawer w/Roll Tray . . . . . . . . . . Base Cabinets Two Drawer w/Roll Tray & Pegged Dish Organizer . . . . . . . . . . . . . . . . . . Base Cabinets w/Full Height Doors . . . . . . . . . . . . . Base Cabinets w/Mixer Shelf . . . . . . . . . . . . . . . . Base Cooking Centers . . . . . . . . . . . . . . . . . . . . . Base Corner Cabinets . . . . . . . . . . . . . . . . . . . . . Base Corner Cabinets w/Pull-Out . . . . . . . . . . . . . . ABFOOT . . . . . . . . . . JCORBELACAN . . . . . . . JACANFOOT . . . . . . . . JACANINSERTM . . . . . . JACANTHUSLEG . . . . . . JLRINSACAN . . . . . . . . ACAM . . . . . . . . . . . ACO . . . . . . . . . . . . ACOVLY . . . . . . . . . . JTILEACAN . . . . . . . . . ADDTK . . . . . . . . . . . APC . . . . . . . . . . . . ALF . . . . . . . . . . . . . ACSFB . . . . . . . . . . . ACSF . . . . . . . . . . . . ACS . . . . . . . . . . . . BLVDFF . . . . . . . . . . AV . . . . . . . . . . . . . CORBELART9 . . . . . . . JBRACKETART . . . . . . . JCORBELARTO . . . . . . . BER . . . . . . . . . . . . ER . . . . . . . . . . . . . SLSW . . . . . . . . . . . SLSCR . . . . . . . . . . . SLS . . . . . . . . . . . . AUTHL, AUTHR . . . . . . BPM . . . . . . . . . . . . DGK-BKSOCKET . . . . . . BARLEG . . . . . . . . . . CORBELBARO . . . . . . . INSERTBARO. . . . . . . . JBAROQUELEG. . . . . . . JLRINSBARO . . . . . . . JBV . . . . . . . . . . . . . BBCPO . . . . . . . . . . . B..B . . . . . . . . . . . . 3DBB . . . . . . . . . . . 3DBB..DD . . . . . . . . . B..RTB . . . . . . . . . . . BBMWD . . . . . . . . . . B .............. 4DB . . . . . . . . . . . . 390 395 391 374 382 379 376 381 381 382 39 29 44 202 202 201 358 380 394 395 395 208 131 211 212 211 32 376 402 382 394 374 383 379 380 227 172 218 220 183 228 171-236 221 4DB..WTCD . . . . . . . . 222 4DB..WTCD . . . . . . . . BCFW..SP . . . . . . . . . 3DB . . . . . . . . . . . . 3CDB . . . . . . . . . . . 3DB..SP . . . . . . . . . . 3DB..DD . . . . . . . . . . 3DB..WD . . . . . . . . . 222 206 221 213 219 220 220 3DB..WTCD . . . . . . . . 219 2DB . . . . . . . . . . . . 216 2DB..DR . . . . . . . . . . 217 2DB..WD . . . . . . . . . 2DB..FD . . . . . . . . . . 2DB..PDO . . . . . . . . . 2DB..RT . . . . . . . . . . 218 215 216 217 2DB..RTPDO . . . . . . . B..FH . . . . . . . . . . . B..FHMIX . . . . . . . . . BCC . . . . . . . . . . . . BC . . . . . . . . . . . . . BC..PO . . . . . . . . . . . 217 174, 175 190 222 204 205 Description Code Base Corner Full Width Cabinets . . . . . . . . . . . . . . . BCFW . . . . . . . . . . . Base Corner Full Width Cabinets w/Curved Pull-Out . . . BCFW..CPO . . . . . . . . Base Corner Full Width Cabinets w/Pull-Out . . . . . . . . BCFW..PO . . . . . . . . . Base Corner Inside . . . . . . . . . . . . . . . . . . . . . . . B..CIA . . . . . . . . . . . Base Corner Outside . . . . . . . . . . . . . . . . . . . . . . B..COA . . . . . . . . . . . Base Corner Peninsula . . . . . . . . . . . . . . . . . . . . BCP . . . . . . . . . . . . Base Corner Peninsula, Full Height Door . . . . . . . . . . BCP..FH . . . . . . . . . . Base Dishwasher Cabinet . . . . . . . . . . . . . . . . . . . BDW . . . . . . . . . . . . Base Drawer Cabinets . . . . . . . . . . . . . . . . . . . . . DB . . . . . . . . . . . . . Base Easy Access Cabinets . . . . . . . . . . . . . . . . . . BEAS . . . . . . . . . . . . Base Easy Reach . . . . . . . . . . . . . . . . . . . . . . . . BER . . . . . . . . . . . . Base End Cabinet . . . . . . . . . . . . . . . . . . . . . . . BEC . . . . . . . . . . . . Base End Shelves . . . . . . . . . . . . . . . . . . . . . . . BHRES, BQRES . . . . . . Base Full Height w/Tray Divider . . . . . . . . . . . . . . . TD..FH . . . . . . . . . . . Base Lazy Susan Corner w/Center Hinge Door . . . . . . BLS . . . . . . . . . . . . Base Lazy Susan Corner w/Revolving Door . . . . . . . . BLS..DR . . . . . . . . . . Base Message Center . . . . . . . . . . . . . . . . . . . . . BMC . . . . . . . . . . . . Base Microwave Cabinets . . . . . . . . . . . . . . . . . . BMW . . . . . . . . . . . Base Microwave Cabinets w/Drawer . . . . . . . . . . . . BMWD . . . . . . . . . . . Base Microwave Cabinets w/Roll Tray . . . . . . . . . . . BMW..RT . . . . . . . . . Base Mixer Kit . . . . . . . . . . . . . . . . . . . . . . . . . MIXKIT..FH . . . . . . . . Base Open Basket Cabinets . . . . . . . . . . . . . . . . . BOB . . . . . . . . . . . . Base Open Cabinets . . . . . . . . . . . . . . . . . . . . . . BOC . . . . . . . . . . . . Base Open Cabinets w/Drawer . . . . . . . . . . . . . . . BOD . . . . . . . . . . . . Base Ovens . . . . . . . . . . . . . . . . . . . . . . . . . . . BO . . . . . . . . . . . . . Base Pan Storage . . . . . . . . . . . . . . . . . . . . . . . BPS . . . . . . . . . . . . Base Panel w/Filler Attached & Authentic End. . . . . . . BEP..AEL, AER . . . . . . . Base Pantry Pull-Outs . . . . . . . . . . . . . . . . . . . . . BPP . . . . . . . . . . . . Base Pots & Pans Pull-Out . . . . . . . . . . . . . . . . . . BPPP . . . . . . . . . . . . Base Recycling Center . . . . . . . . . . . . . . . . . . . . . BRC . . . . . . . . . . . . . Base Rotating Deep Bin . . . . . . . . . . . . . . . . . . . . BRDB . . . . . . . . . . . Base Spice Drawer . . . . . . . . . . . . . . . . . . . . . . . BSD . . . . . . . . . . . . Base Transition Cabinets . . . . . . . . . . . . . . . . . . . BTC . . . . . . . . . . . . Base Wastebasket . . . . . . . . . . . . . . . . . . . . . . . BWB . . . . . . . . . . . . Base Wastebasket Full Height . . . . . . . . . . . . . . . . BWB..FH . . . . . . . . . Base Wastebasket Lids . . . . . . . . . . . . . . . . . . . . BWBFHLID, BWBLID . . . Base Wine Cubby . . . . . . . . . . . . . . . . . . . . . . . BWC . . . . . . . . . . . . Baseboard Moulding . . . . . . . . . . . . . . . . . . . . . BBM . . . . . . . . . . . . Baseboard - Sculpted . . . . . . . . . . . . . . . . . . . . . BBMSC . . . . . . . . . . Baseboard - Swooped . . . . . . . . . . . . . . . . . . . . . BBMSW . . . . . . . . . . Bases w/Cutlery Insert . . . . . . . . . . . . . . . . . . . . B..CIW . . . . . . . . . . . Bases w/Drawer & Lid Organizer & Roll Trays. . . . . . . B..RTLO . . . . . . . . . . Bases w/Full Height Doors & Roll Trays . . . . . . . . . . B..FHRT . . . . . . . . . . Bases w/Lid Organizer & Roll Trays . . . . . . . . . . . . . B..FHRTLO . . . . . . . . Bases w/Roll Trays. . . . . . . . . . . . . . . . . . . . . . . B..RT . . . . . . . . . . . Bases w/Roll-Out Tray Divider . . . . . . . . . . . . . . . . B..TDRO . . . . . . . . . . Bases w/Tray Dividers . . . . . . . . . . . . . . . . . . . . TD . . . . . . . . . . . . . Bases w/Wood Cutlery Insert & Roll Trays . . . . . . . . . B..RTCIW . . . . . . . . . Bases w/Wood Tiered Cutlery Divider Drawer . . . . . . . B..WTCD . . . . . . . . . Bases w/Wood Tiered Cutlery Divider Drawer & Roll Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B..RTWTCD . . . . . . . . Bijou Corbel . . . . . . . . . . . . . . . . . . . . . . . . . . . JCORBELBIJ . . . . . . . . Bijou Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . JBIJFOOT. . . . . . . . . . Bijou Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . JBIJINSERTM . . . . . . . Bijou Light Rail Insert . . . . . . . . . . . . . . . . . . . . . JLRINSBIJ . . . . . . . . . Bookcases Tall . . . . . . . . . . . . . . . . . . . . . . . . . TBC . . . . . . . . . . . . Bookcases Tall w/Doors . . . . . . . . . . . . . . . . . . . TBCD . . . . . . . . . . . . Bookcases Wall Furniture . . . . . . . . . . . . . . . . . . . WFBC . . . . . . . . . . . Box Column Fillers (Wall, Base, Tall) . . . . . . . . . . . . BCF . . . . . . . . . . . . Braided Moulding . . . . . . . . . . . . . . . . . . . . . . . BRAIDM . . . . . . . . . . Bread Box Lids . . . . . . . . . . . . . . . . . . . . . . . . . BBX . . . . . . . . . . . . Broom Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . BRMCLP . . . . . . . . . . Buffet Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . JBUFFETLEG . . . . . . . . Cabinet Box Only . . . . . . . . . . . . . . . . . . . . . . . CBO . . . . . . . . . . . . Cabinet Case Only . . . . . . . . . . . . . . . . . . . . . . . CCO . . . . . . . . . . . . Cabinet False Panel . . . . . . . . . . . . . . . . . . . . . . CFP . . . . . . . . . . . . Cabinet Frame Only . . . . . . . . . . . . . . . . . . . . . . CFRMO . . . . . . . . . . Cabinet Front Only . . . . . . . . . . . . . . . . . . . . . . . CFNTO . . . . . . . . . . . Cabinet Panel Edge Moulding . . . . . . . . . . . . . . . . CPE . . . . . . . . . . . . Page Number 205 206 206 215 214 230 231 228 215-221 177 208 215 231 190 207 207 227 229 229 230 401 224 232 233 228 401 369 226 188 223 212 225 214 223 223 401 225 377 377 377 173 187 184 187 182 189 189 186 173 186 395 391 374 379 314-315 316-317 313 359-360 374 401 401 383 34 34 34 43 43 376 Effective March 17, 2014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . Desk File Drawer Bases . . Drawer Front Raised 5-Piece . . . . . CD Insert Kits . . . . PENFALSEPNLCLIP . . . . . . . . .. . . . . . . . . JINSERTLRC . . . . . . . DAPNL . . . . . . . . . . . . . DFF5PC . . . . . . . . . . . . Cosmo Leg . . . . . . . . . . . Corner Door Cabinets . ENGISLCOLUMN . . . . . HM . . . . . . . . . . . . .P. . . . . . . . . . .P. . . . . CDI . . . . . . . . . STRTHEATSHIELD . DCM . SPTRINGREED . . . . . . . . . . . . . . FBF . . . . . . . . . . . . . . . . . . . . . . . Desk Door Drawer Bases . . BLSBEP . . . . . . . JCORBELCOS13D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drawer Front Raised . . . . . . . . . JROPELEG . English Country Leg . . . . . . . . . . . DDO . . . SM . . . . . . . . . . . . . . . . . . F. . . . . . . . . Drawer Front Flat 5-Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hearth Shelf . . . . . . . . CG. . . JESTATELEGS . Cosmo Corbel. . . . . . . . . . . . Cosmo Light Rail Insert . . Desk Easy Reach . . . . . . . . . . . . DER . . . Classic Tall Crown Moulding . . . False Panel Clips . . JFRNCNTYLEG . . . . . . . . . . . . . . . . . . . . . Decorative Split Turning Reed . . . . . . . . . . . . . . . . . . . . 2014 DESCRIPTION INDEX Description B . . . . . . . . . . . . . . . . . . . . .BTM. .. . . . . . . . . . . . . . . .. . . . . . . . . . . . . TED . . WTCD . . . . . Frieze Insert . . . . . . . . . . . . .P. . . FRNLG . . . . . . . . . . . . . . . . . . . . . . . . SPTRINGSPOOL . . . . . . . . Celtic Overlay . . Classic Rope Leg. . . . . . . . . . . . DFR5PC . . . . . . . . . . . Page Number 126 129 362 362 31 30 30 30 30 402 161 402 130 37 375 367 367 367 367 366 366 366 383 383 383 384 384 384 36 403 32 403 326 357 357 366 32 376 226 155 39 39 39 358 391 385 390 373 37 403 373 324 323 32 380 404 381 375 405 170 169-170 167 168 170 406 Effective March 17. . . . . . . . . . . . . . . . . . . Estate Leg. Floating Shelves . . . End Panel Skins/Tall . . . . . . . . . . . . 13″ Large . .. DDFD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full Depth Shelving . . . . . . . . Dishwasher Door Kit . . . . . . . . . . .CRSGR . . . .SLS . . . . . . WEPS . . . . . . . SPTRINGROPE . . . . . . . . . Contemporary Light Rail .. . . . TEP . . . . .. . . . . . . . . . . . . . . HS . . . . . . . . . . Diagonal Wall Cabinets w/Tambour . . . . . . . . . . . . . . . . JCRAFTFOOT. . . FTKAV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CPU Bases . . . . . . . . . Small. . . . . . . . . . . . . . . . . . French Country Leg . . . . .. . . . CUDD . . . . . . . . . . . . . . . . . . . . . . . . . . DWB. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4X . . Estate Leg. . . . . . . . HP. . . . . . . Desk Waste Basket Full Height Bases . . . . . JCOSFOOT . End Panel Skins/Base . . .P . . Diagonal Corner Moulding . . . . . . . . . . . . . . . . . . . WED . . . . . .P . . . . . . . . . Country Sink Base w/CabMat . . . . BEP . . . . . . Cut for Glass Doors . . . . . . . .. . . . FTK. . . . . . . . DW. . . . . Countertop Edge Moulding (Contemporary & Traditional) . . . . . . . DW. . . . . . . . . . . . . . . . . . . . . . . Filler Return . . . . . . . . . . . . . . Small Split . . . . . . . . . . . . . . . . Cosmo Corbel. .21 . . . . . . . . . . Cross Grain Veneer Back Skin 1/4″ Panels . . Decorative Door Panel Kits. . Diagonal Base Cabinet w/Full Height Door & Super Lazy Susan . . . . . . . . Cosmo Corbel. . . . . . . . . . . . . Hearth Piers w/Pull-Out . . . . . . . . . . . . Celtic Insert . . . .T . . . . . . . . . . Greek/Aztec Moulding . . . . CG. . . . . . . . . . . . . . . . . . . . . . . . . End Panel/Base . . . . . FB . . . . . . FTK. . . 13″ Large Deep . . Celtic Corbel . EXR . Country Sink Bases . . . . . . . . . . . . . . . . Corner Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CPU . . . . DFD . . . . . . . . . . . . . CF . . . . . . ER . Wall End . . . . . . . . . . . . . JESTATELEGSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CabMat™ . . . . . . . . . . . . . . . . . . . . HL . . End Panel/Tall . . . .. . . . . . . . . . . . . . . . . . . . Cosmo Insert . . .. . . . . . . . . . . . FTKAV. . . . EasyTrax™ . . . . . . DW. . . . . . . . . . PULLH . . . . . . . Dentil Moulding . . JFLUTELEG . . . . . . . . JCORBELCOS13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DW. . . . . Decorative Split Turning Rope . . . . . . . . JESTATELEG . . . . . . . . Diagonal Wall Cabinets w/Lower Door . . . . . . . . SPTRINGEND . . . . Furniture Drawers . . . . . . . . . . . . . . . . . . . . . JFLUTELEGSS . . . . BED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . Small . F . . . . . Decorative Door Panel Kits. . . . . . . . . . . . . . . . . . . . . . .DS . . . . . . . . . .P . Glass Shelf Kits . . . . . . . . . . . . . . . EXL. . . . . . Small Split. Flush Toekick . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FNT. . . . . . . . . . . . . . Furniture Finished Plywood Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JCORBELCRAFTO . . . Hearth Liner . . . . . . . . . . . . . . CBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . End Panel Skins/Wall . . . . . . . . . . . . . . . . . . . . . . . . . . Flush Toekick Arch . . . . . . . . . . . . . . . . . . . . . . . . Flat Scribe Moulding . . . . . . . . . . . . . . . . . . . . . . . . . . . . Egg & Dart Moulding . . . . . . . . . . . . . . . . . . JROPELEGS . . Decorative Split Turning Spool . .. . . . . . . . . . . . . . . . . . . w/Drawer . . Fluted/Beaded Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . Classic Rope Leg. . . . . . . . . . . . . INSERTCELT .. . . . . . . . . . . . . . . . Decorative Split Turnings 3″ . ES . . . . Craftsman Open Bracket. . . . . Decorative Split Turning End . Flush Toekick Furniture . . . 34 402 378 402 394 375 379 381 382 384 384 384 387 387 387 373 407 379 402 397 381 145 357 144 373 394 394 394 391 383 375 379 376 203 203 373 321 391 395 367 363 44 397 364 371 371 372 393 393 393 393 393 37 375 318 320 319 322 320 321 207 DAB. . . . . . . . . . . . . . End Panel/Base Lazy Susan . . . . . French Leg . . . . Corinthian Overlay . . . . . . . . . . . . . . JCOSMOLEG . . . . . . . . . . FIC . . . . . . . . . . Finished Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DW . . . . . . . Decorative Door Panel Kits. . . . . FS . . CLTCROWN . . . . . . . . . . . . . . . .FH . . . . . COTCROWN . . . . . . . . . Corner Tambour Cabinets . . . . JGSK . . . . . . . . Base End . . . . . . . —. . . CCM. . . . . . . . . . . . . . . . . . . . . . . FTK. . . . . . . . . . . . . . . . . . . . . . . . . . . . Cookbook Rack . . . . . . . . . . . . . . . . . . . JCOROVLY . . . . . . . . . . . . . . . . Decorative Appliance Panels .. . . . . . . . . . . . . . . . . . . . . . . . . . Hearth Mantels . . . . . . . . . . . . . . Celtic Light Rail Insert . . . . . . . . . . Diagonal Wall Peninsula Cabinets . . . . . Deep Roll Tray . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . CABMAT . . . . . Full Overlay Crown . . . . . . . Small . . . Extended Stile . . . . . . . . . . . BP . . . . . EGD . Furniture Valance . . . . . DFSLB . . . . . . . . . . . . . . .R . . . . . . . . . . . . . . . . . . Diagonal Wall Cabinets w/Lazy Susan . . . . . . . DOOR . . . . . . . . . . . . . . . . . . . . . .. Custom Doors w/Hinge Routing . .. . . . . . . . . DVD Insert Kits .. . . . . . . . . . . . EXB. . . .. Full Depth Shelf . . . . . . . . . . French Country Foot . . . . . . . . . FDWB . . Small Split . . . . . . Cosmo Foot . . . . . .. . . . . . . . . . . . CAPM . JCORBELCOS7. . . . . . . . . . . . . DWP . . . . . . . . . . . . . . . . Drawer Front Slab . . . . . . . . . . . . . CONVERSION . . . . . . . . DDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 . . . Classic Fluted Leg. . . . . . . . . . . . . . . . . . . . . . . . . Classic Fluted Leg. . . End Panel/Vanity Base . . . . . KNOBH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SK . . . . . . . . . . . . . . . . . . . . . . . . . Cornice Tall Crown Moulding . . . . . . CNTYSB . . . . . . . . . . .. . . . . . . . . . 208 379 122-124 124 125 127 124 Description Code Diagonal Wall Cabinets w/Tambour & Lazy Susan . . . . . . . . . . . . . . . . . . . Grape Overlay . . . . . . . DFPSLB . . . . . . . . . . . . . . . . Drawer Guide Kits . . . . . CNTYSB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CT . . . . . . GREEKM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TEPS . . . JROPELEGSS. . . . .Code Page Number Cabinet w/No Door. . . . . . . . . . . .. . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . CORBELCELT . . . . . . . . FSHK . . . . . . . . . . .FNT. . . . . . . . FTKFV. . . . . . . . . . . . . . .. . . . . . . . COVECROWN . . . FALSEPANELCLIP. . .. . . . . . . . . . . . . . . . . . . . . . . . . . Exterior Shelves . . . . . . . . . . . . . . . .TOP . . . . . . . . . . . . . . . . . . . . . . . . . . .. BEPS . . . . . . FD . . . . . . . . . . . . . . . . . . Diagonal Wall Cabinets w/Lower Door & Lazy Susan . . . . . Furniture Drawer Window Bench . . . . . .. . . . Cove Crown Moulding . . . FPEB . . . . . . . . . . . . . . . Ductless Conversion Kit . . JFRNCNTYFOOT . . . Diagonal Base Cabinet w/Full Height Door & Lazy Susan . . . . . . Hearth Piers . . JLRINSCELT . . . . . . . . . . . FV . . ROSETTCELT . . . . . . . . . JENGCNTYLEG . . . . . . . . . . . . VBEP . . . . . . . . . . . . . . . . . . . . . . . . . HPP. . Heat Shields . . . . . . . . . . . . .. . . . . CG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GROVLY . . ANGLHEATSHIELD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cap Moulding . . . . . . . . . . . . . DAB . . . . . . English Island Column . . . Filing System Hardware Kit . . . . . . . . . . . . . . . . . . . . FTKFV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CIW. Face Frame and Door on End . . . . . . . . . . . DRT . . . . . . J3SPTRING. . Fillers . . . . . . . . . . . . . . Dovetail Drawer Undermount . . . . . . . . . FTKAV. . . . . . . . . . . . . . . . . Tall End . . .D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clips & Screws . . . . . . . . . . . . . . . . DVDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Floating Island Bases . . . . . . . . . . . . . . . . . . . . . . DW. . . . . ET . . . . . . . . . . . DE . . . . . Finished Back Skins . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English Bar Column . . Diagonal Wall Cabinets . . . . . . . . . . . . . . . JLRINSCOS. . . . . . . Easy Reach Wall Corner Cabinets . . . . . . . . . . . . . . .. . . . . . . . . . . Classic Fluted Leg. . . . . . . . . Craftsman Foot . . . . . Estate Leg . . . . . . . . . . . . Desk Double File Drawer Bases . . . BP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Desk Drawer Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FNT. . . . . . . . . . . . . . . . JCELOVLY . . . . . . ENGBARCOLUMN . . . . . . . . . . . . .S . TCM . . . . . . JCOSINSERTM. . . . . . DW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FFDL. . . . FD . . . .P . . . . . . . . . . . . . . . . . . . . . . . . . Dishwasher Front Panels . . . . . . . . . . . . . CND . . . . . . Hardware Decorative Pulls and Knobs . . . . . . . CD . TCD. . . . . . . . . . . . . . . . . . . . . . . . . . . FTKFV. . . . . FFDR . . . . . . . FOLCROWN . . . . . . . . . . . . . . DGK . . . . . . . . . . . . . . . Cooking Utensil Divider . . . . . . DWD . . . . . . . . . . . . . Classic Rope Leg . . . 7″ Small. . . . ... . . . . . . . . . . . . . . . JINSERTFRM . . . . . . . . . . . . . .. .TS . . . . . . . . . . . . . . . . . . . . . . . . . JFLUTELEGS . . . . . . . . . . . . . . . . . . . . . . . . . . Celtic Rosette . . . . . . . . . . . . . . . . . Cutlery Dividers . . . . .CM . . . . . . . . . . . . . . . . . Reed Leg . . . . . . . . . . . . . Outside Corner Moulding . . PRMD. . . . . . . . . . . . HINGERESCLIP . —. . . . . . . . . . . . . . . . . . . . . .DESCRIPTION INDEX C Description Code Page Number Hinge Angle Restriction Clip . BEPF. . Roll Tray Plug In Bracket . . . LOSC . . . . . . . .PS . . . . . . . Light Baffle Moulding . . . . Madeline Corbel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 SB. . . . . 382 PE . . . . . . ISLLEG . . . . . Linen Closet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIDSTAYHD . . . . 381 SHM . . . . . . . . . . JCORBELOWD7 . . . . . ID . . . . . . . LGCORBEL . . . . . . . . . . . . . . . . . . . . . . . . Installed Roll Tray. . . . . . . . . . . 373 PLBLOCK . . . . . . . . . . . . . . . . . . . . MD. . . . . . . OCS.. . . . . . . Effective March 17. . . . . . . . . . . . . LB . . . . . .CDY . . . 197 SB. . . . . . . . . MCC . . . . . . . . . 386 RT . . . . . . . . . 399 RTBKSXSP . . . . . . . . . . . . . . . . Recessed Panel Arch Valance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 SBP . . . . . . Mullion Doors. . . . . . . . Recessed Island Toekick . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oven Cabinets Double w/Drawer . . . . . . Loose Toekick . . . . . . . . . . Sink Base w/Tilt Downs & CabMat . . . . . .STS . . . . . . . . . . . . . . . 395 ROSETTESCR . . . . . . . . . . . . . . . Sink Base SuperCabinet™ w/Tilt Downs & CabMat . . . . . . . . . . . . . . . . . 373 SHELFPEGS . . . . . . . . . . . . . . . . . . . . . . Segmented Super Susan . Sink Bases w/Clipped Corners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Insert Crown . . . . . . . . . . . . . . . . . OGEEM . . . . .TOP . . .. .. . . . . . . . .STCM . . . . . . . . . . Inside Corner Moulding . . . .TOP . . . . . . . . . . . . . . . . . . . . . . . . . PDOPOSTS . . . . . . .. . . . . . . . . . . . . . . . . . . . Light Rail Moulding . . . . . 399 DRT . . . . . . . . . . . . . . .CCST . . . . . . Oven Cabinets Double . . . . . . . . . . . OC135 . . . . . . . . . . . . . . . . . . . . . Madeline Light Rail Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shell Overlay . . . . . Sink Bases w/Drawers Below . . . . . OL . . . . . . . . Single Outlet Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 JRDLEG. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . Sliding Towel Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WDE . . . . . . . . . . . . . . . 195 SB. . . Mullion Doors . . . . . . . . . . . . .. . . . . . TEP. . . .S . . . . . . . . . . . . . . . . . . . . . .. . . .D . . . . . . . . . . . . . . 396 SBCADDY . . . . . . . . . Fluted . . . . . . . Quarter Round Moulding . . . . . . . . . JCORBELMAD9 . . . . . .191 SB. . . . . . . . . . . Oven Installation Kit . . . . . . . . . 376 SBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rosette 6″ . . . . . . . . . . . . . . . Microwave Cooking Centers . . . . . 381 FFRC . .DD. . . . . . . . . . JMETROFOOT . . . . . . . . . . . . . . . . . . 41 RRC . . . . .. . . . . . . . . . . . . Installation Hardware Parts . . LSP . . . . . . . . . . . . . . 196 SB. . . Scooped Drawer . . . . . . . . PTU . . . . Mission Rosette . INSCROWN . . . . RDLEG . . . . . . . 396 SHKRCRM . . . . LO24DP . . . . . . . . . . . . . . . . Shaker Crown Moulding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 STR . . . . . 407 JPWRPOD . . . . Pots & Pans Organizer Bases w/Drawer . . . . . . . . . . . . . WD . . . . . . . . . . . . Rosette 3″ . . . . . . . . . . . . . . . . . . . . . . . . . 392 FFP. . . . . . . . . . . . . . . . . . . . . . . . Single Rocker Plate . . . . . . . . . . . . . . . Madeline Corbel. . . . . . . SCPDRWB. . . . . . . . . . . . . . . . . . . . . . . . Olde World Corbel 5″ . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 375 TROSETTE . . . . . BFPC . . . . .. . . . . 2014 . . WD . . . . . . . . Lille Foot .. . . . . . . . . . . . . . . . . . .STSCM . . . . . . . . . . . . . . . . Madeline Corbel. Pantry Top Units . . . . . . . . . . . . . . . . . . Shelf Pegs . . . . . . . 193 SB. . . .. . . . Plywood Ends . . . . . . LGSQFOOT . . . . . . . INVFRM . . . . . . . . . . . . . . JTILEMISSION . 406 404 35 373 379 407 37 36 385 376 394 380 373 392 213 376 407 407 378 378 392 352 407 353 353 41 395 395 395 391 375 379 391 33 355-356 386 386 391 296 376 394 394 375 386 379 381 382 45 47 46 376 394 394 395 380 380 261-290 276-280 282-290 291-295 262-265 266-275 407 297-311 358 368-370 255 255 259 Page Number Description Code Pegged Dish Organizer . . . . . . . . . . . Panels w/Filler Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIDSTAY. . . . . . . . . . . . . . . . . . . . . . . . . . 224 RD . . . . . Shaker Corbels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 JRPV . . . . . . . OCD. . . . . . . . . . . . . . . . . . . . LCRH . . . . . . . . . . . 194 SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Premium Door Mechanism . 209 JCORBELSHKR . . . . . . . . Inverted Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LRM . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIP . . . . . . . . . . . JLRINSMIS . . . . . . . . . . . Sink Base SuperCabinet™ w/Tilt Downs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . JCORBELOWD4 . . HINGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mission Corbel 6″ . . . . . . . . . . . . . . . . . . . . Matching Interior Plywood . JCORBELMAD4 . . . Oven Cabinets Single . . . . . . . . . . . . . . . Madison Foot . . . 396 JSRC . . . . . . . . . . OCD. 381 FFRC. . . . . . . . . . . . . . . . Metropolitan Foot . . . . . . 387 RPM . . . . . . . . Queen Anne Leg . . . . . . . . . . . Hinges . . CORBELOWD5 . . . . . . . . . . 382 DOORSAMPLE . . . . . . . . . . . . . . . . . . . . . . . . . . JLRINSMAD . . . SHMD. . . . . . Printer Bases . . . . . . . . 408 JWEAVELEG . . . . . . .BTM. . . . . Olde World Corbel 4″ . . . . . . . . . 376 MC . . . . . . . . . . . . . . . 200 SB. MC. . . . . . . 43 PR . . . . . . . . . Roll Tray Kits Deep . . . . . . . . . . . . . Mission Tile . . . . . Sink Front Bottoms . . . . . . . . . . . . . . . . . . OCS . . . . . . . . . . .DD. . . . . . . . . . . . 193 SFB . . . . . . PTUP . Plain . . . . . . . LO. . . LCHAMPERLNR . . . . . . . . . . . . . . JMADINSERTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plinth Block . . . . . . . . 380 JQUNANNELEG . . . . 199 SB. .. . . . . . . . Reduced Depth . . . . . . . . . . . . . Single Bead Pilaster . . . . . . . . . . . 41 JRCPV . . . . . . . . . . Metro Island Column . . . . . Recycling Trash Cabinets .SCM . . . . . . . . . . . . . . . . . . . . . . . 408 SB. . . . . . . . . Ivy Moulding . . . . . . . . . .. . . . . . . . . . . . . . . . . . . 188 PPP . . . . . . . . . . . . . . .. 4″ Small . . . . . . . . . . . . . . . . . . SHMD. . . Single Bead Edge Moulding . . . . . . . . . . . . . . . . . . . . .. . . . . . JMISINSERTM . . . . . . . . . . . . . .FCC. Peninsula . . . . . . . . . . . . . . . . . . . . . . .. 31 CORBELSCR6 . . . . . . .. . . OCM . Roman Weave Leg . . . LBRM . . . . . . . . . . . . . Single Bead Moulding . .. . . . . . TKP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CORBELMIS6 . WEP . . . . . . . . . . Prairie . . . .STSCDY . . . . . . . . Sink Bases w/Clipped Corners. . . .ST . . . . . . . . . . . 380 SCPDRW. . . Mission Insert . . . . . . . . . . . 199 SB. . . . . . . . . . OCINSTALLKIT . . . . . METBARCOLUMN . . . . .CC . . . . . Linen Storage Cabinets . . . . . . . . . . . . . . . . . . . Fluted . . . . . . . . . . . . 408 PRB . . . . . .. . . . .. . . . . . . . . . . . . ... . . . . . . Mullion Doors. . . . . . . . 6″ Medium.. . Sink Bases w/Tilt Downs . . 355 JSOC . . Sink Base SuperCabinet™ w/CabMat . . . . . . . . . . . . . . . . . . . . . . . . Sink Base SuperCabinet™ w/Tilt Downs & Caddy . . . . . . . . . . . . PDO. . . . . LSHAKER . . . . . . . . . . . . . . Roll Tray Kits . . . JMADFOOT. . 191-193 SB. . . . . . . . . Scroll Corbel 9″ . . . . . . . . Ogee Edge Moulding . . . . . . . . LC . . . . . . . Linen Closet w/Removable Hamper . . . . RT . . . . . . . . . . Mission Light Rail Insert . . . . . . . . . . . . . . Mission Leg . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . 196 SB. . . . . . . Shoe Moulding—Convex Inside Corner . . . . . . . . . . . . . . . . . . . . . . . Large Outside Corner Moulding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PY . . . . . . . . . . . . . . . . . . . . . Large Corbel . . . . . . . . . . PRMD. . . . . . . BFRC . . . Sink Bases . . . . . . . . . . . . Medicine Cabinets (Single & Tri-View) . . . . . . . . . . . . . . . . . . . . . . . . . Oven Microwave Cabinets . . . . . . . 380 RECTKBK. . . . . . . . . . . . . 395 CORBELSCR9 . . 380 RECTKALL . . . . . . . . . . . .. Sink Base Caddy . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 410 SV . . . . . . . . Oven Cabinets . . . . . . . . . Recessed Toekick on Back or Side . . . . . . . . . . . .CM. Power Pods . . .. . . . . 408 SHOVLY . . . . Pantry Units . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . OC .. . . . . . . . . . . . . . . . . . . . Library Moulding . . . . . . . . . . . Sink Base SuperCabinet™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oven Cabinets Single w/Drawer . . . . . . . . . . . . . . . . . . . . . CORBELMIS9 . . . . . . . . LIFOOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sample Frame & Doors . . . Lidstay . . . . . Linen Closet Hamper Liner . Shelf Pull Down . . . . . . . . . . . . . Mirror Frame Moulding . . . . . . . . 408 SHLFPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . Large Square Foot . Plain . JCORBELMAD6 . . . Large Shaker Crown . . . . . 198 SB. .. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Madeline Foot. . . Outside Corner 135° Moulding . . . . . . . . . . . . . OMC . . . Sink Base SuperCabinet™ w/Caddy . . . . Scalloped Valance . . Overlay Fillers . . . . . . Raised Panel Arch Valance . . .TOP . . . Lid Organizers . . . . . . . . . . . . . . .. . . . . . . . . . RECTKR . . Island Leg . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . SCPDRWL. . . . WMF . . . . . Rope Moulding . . . .. . . . . . . . . . TMLC . . Plate Rail Moulding . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 Scroll Corbel 6″ . . . . . . . . . Sink Base w/Caddy . . . . . . . . . . . . . . . . . . . . . . . . . Mission Corbel 9″ . . . . . . . . 382 FFP . . . . . . . . . . . . . . . . . . 9″ Large . 408 PDM . . . . . . . Pots & Pans Pull-Out . . . . . . . . . . . . . . . . .SCDY . . . . . . . . .. Sink Base w/Tilt Downs & Caddy . . . . . . . . . . . Pantry Top Units w/Pull-Out . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . ICM . . . . . . . . . . . . . . Rosette (Traditional) . .. . . . . . . . . . . . . . . SCPDRWR . . . . . . . . . Oven Cabinets Double w/Drawer & Extended Opening. . Sink Bases w/Clipped Corners & Tilt Downs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 QRM . . . . . . . . . . Metro Bar Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plinth Block Filler 6″. . . . . . . IVYM . . . Single Door Medicine Cabinet . . . . . . . . LT . . . . . . . . . METISLCOLUMN . . . . . . RECTKL. . . Shaker . . . . . . . . . . . . . . . . . . . .. . . MD. . 192 SB. . . . . . . Sink Bases w/Clipped Corners & Tilt Downs. .. . . . . . . . . . . . . . . . OCD . . . . . . . . . . . Scroll Rosette . . . . . . 381 SSS . . . . . . . . . Madeline Insert . 198 SB. . . . . . . . . . . . . . .. . . . .STCDY . . . . . . . . . . . . . . . . . . . . 380 SBE . . . . . . . . . . . MD. . . . . Olde World Corbel 7″ . . . . . . . . . . . . . . . . . Sink Base w/CabMat . . . . 407 P . . . . . . . . . . . . . ROSETTEMIS . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 29 B. . . . JMADEFOOT . . . . . . . . . . . . Increased Depth . . . .FCCST . . . . . . . . Lazy Susan Pull-Out . . . . . . . . . . . . . 195 SB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . DLEGMISSION . . . . . . . . Plinth Block Filler 3″. . . . . . . . . . . . . . . . . . . . . . . . . .FP . Tulip Leg .U . . W . . 374 SLSW . . . . . . . . . . . . . . . . .Code Small Corbel . . .FP . . . . . . . . . . . . . . . . . . . . . . . . Square Bar Leg. . . . . PRS. . . . . . . . . . . . . . . . . . . . . . . . . . . Vanity Utility Cabinets . .UD . . . . . . . . Wall Appliance Garage Door . Stacked Diagonal Wall Cabinets . Universal Design Base Microwave Cabinets . . . . . . . . . . . . . Tapered Wood Hood Blower . . . WB . . . . . . . . Vanity Angle Corner Sink Front . . . . . . . . . . . . . . . . . . Solid Wood Tall Crown Moulding . . . . . . . . 139 STAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSD . . . . . . . .. . . . . . . . . . 370 TPP . Tapered Leg . . . . . . . 378 TKC . . . . 389 JSQISLLEG3S . . . .. . . . . . . . . . . . . . . . 388 JSQBARLEG . . MTUK . . . . . . . . . . VM . Toeboards . . . . . . . . . . . . . . . . . . Vanity Hamper w/Drawer. . . Tulip Foot . . . . . . . . . . VSB. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . BF. . . . . VER . . . . . . . . VS3D . . . . . . . . . . . . . . . . . . . . . . . . . . Super Lazy Susans w/Chrome Rail .. . . . . . . . . . . . . . . . . . . Utility Storage w/Pantry Pull-Out . . . . . . . . . . . . . . . . . . . . . . .TMLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 111-116 STWEC. . . . . . . . . 408 TB . . . . . .374 SWLCRM . . . . . . . . . 30″ . . . . . .. . . . . . . . . . . . . . . . . . . . . . Spindle Rail Moulding & Cornerpost . . . . . . . . . . . . . .. . . . . . . . . . 409 JINSERTLRT . . . . . . . . . . . . . . . . Starter Moulding . . . . . . . . . 38 TBEM . . . . . . .AEL. . . .. . . . . 395 SFM . . . . . . . . . . . . . . . . . . . . . . . . 127 STW . . . . . . . . . . . . . . . . . . . .D . . . . . . . . . . . . . . . . . . . . . . . . . .. . 351 234 235 236 237 237 235 236 236 236 238 237 390 239-244 245-246 253 247-250 251 252 258 258 36 378 350 350 335 328-329 409 335 337 345 372 334 336 338 352 352 354 338 330-331 331 332 331 332 339-344 349 350 347 348 345 353 354 354 42 144 176 176 146 141 151 152 143 Effective March 17. . . . . . . . . . . . . Universal Design Single Oven Cabinet . . . . . . Solid Wood Large Crown Moulding. . . . . . . . . . . . . . . . . . . . . . . .STUD . . . . . . . . . . . . . WBCPO . . . . . . . . . . . . . FR. SRP. . Wall Built-In Microwave Cabinets . Special Size Vanity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Universal Design Base Cabinets w/Roll Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392 TUK. . . . . . . . . Universal Design Sink Base Cabinets . . . . . . TVRVV . . . . . . . . . . . . Spool Leg . Vanity Cosmetic Center Drawer Base . . . . . . . . . Vanity Sink Drawer Bases w/Six Drawers . . . VB . . . . Utility Easy Access Cabinets . . . . . . . . . . . . . . . . . 377 SPLEG . . . . . . . Vanity Four Drawer Bases . . . . . . . Super Susans . TV . . . . . . . . . Tray Dividers . . . . . . . . . . 392 JSQFOOTS . . . . . . . . . . . . . . . . . . . . . . Wall Base Single Door Cabinets . . . . . . . Traditional Open Corbel . .. . . . . . . WB . 388 JSPLEGT . . . . . . . . . . VDLUD . . . . . VSD . . . . 160 TWH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 SLSCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SLS. . . . . . . . . . . . . . . . . . . . . . . Description Code Tri-View Medicine Cabinets . . . . Universal Design Sink Base Cabinets w/Tilt Downs . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . UOC . US. . . . . . . . . . . . . . . . . . . . . . . . Small Light Rail Moulding . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid Wood Victorian Crown Moulding . . . . .RT . . . . . . Square Island Leg. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 42 TKTLFOOT . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 ST . . . . Small Cove Crown Moulding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RP. . . . . . . . . . . . . 388 JSPLEGSS . . . . VU . . Space Fillers . . . . . . . . . . .. . . . . 388 JSPLEGS . . . . .357 SPACERBLK . . . . . . . . . . . . . . . . . . . VSB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UEAS . . . . . . . . . . .UD . . .UD . . . . . . . . . . . . . . . . . Vanity Chrome Roll-Out Rack . . . . . WBMW . . . Universal Design Super Susan . 380 STR8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 BV2SC30PR. . . . . . . . . . . . . . US . . . . . . . Spice Racks . . . . . . . . . 377 SBS . . . . . . . Vanity Bases . . . . . . . . . . . . . Vanity Drawer Bases . . . . . . . VACSFB . B. Vanity Door Drawer Bases . . . . . . . Super Susans w/Chrome Rail . . . . . . . . . . . . . . . . . . . . . 143 VV . . . . . . . . . . . . Stacked Wall Cabinets Double Door . . . . . . . . . . . Straight Valance .UD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . Tray Divider Roll-Out Kit . . SR . . . . . . . . . . . . . . . . . Vanity Wall Cabinets . . . . . . . . . . . . VTK . . . . VSD . . . Vanity Wall Towel Bar . . . . . . . . . . . . . . . . . . . . . . 210 BSC30PR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . VCCB . . . . . . . . . . . . . . . . . SR . . . . . . . . . . . Vanity Sink Drawer Bases . . . . . . . . Tablet Holder . . . . UOCDZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . Void Toekick . Triple Bead Pilaster Moulding . . . . . . . . . . . . . . . . Touch-Up Kits . . . . 408 SR. . . . . . . . . . 134 STWTC . . . Vanity Cosmetic Center Base . . Toekick Tulip Foot . . . . Square Corner Sinks . SMCORBEL . . . . . . . . . . . . . . . Vanity Pull-Out . . . . U . . . JTULIPLEG . . . . . . . WCD . . . . . . . . . . . . . . 394 SMCOVECROWN . . . . . Snack Bar Support . . . . . . . . . . . . . . . . . . . . RS. . . VCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . SRP.. . . . . . . Vanity Sink Bases w/U-Shaped Roll-Out Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . Utility Storage w/Pantry Pull-Out and Pot and Pan Rack . 392 TWHBLOWER . . . . . . . . 378 JCORBELTRADO . . . 392 JSQISLLEG . . . . . . . . . . . . Tray Divider Kit . . . . . . . . . . Vanity Sink Bases w/Wastebasket . . . VSB. . . .. . . . . . . . . Utility Cabinets w/Roll Trays . . . . . . . . . . . . .. . . . . . . . . . . . . . . . Vanity Sink Bases SuperCabinet™ w/Tilt Downs & Wastebasket . . . . . . Split . . . . 159 TOT . . . . TB8UD . . . . .377 SWCRM . . . . . . . . . . . . . . . . . . . . . . . .UD . . . VSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VACSF . . . . Spool Decorative Leg . . . . . . . . . . Square Foot. . . 36″ . . . . . . . . . . . . SuperCabinet™. Stacked Wall End Cabinets Single Door . Utility Cabinets . . . . . . . VP . . . Small Split . . . . . . . . . . . . . . . . . . VCCDB . . . . . . . . . . . . . B. . . . . Traditional Light Rail . . . . . . . . . . Universal Design Base Cabinets . . . . . . . . . . .. . . . . . . . . . Vanity Base Easy Reach . . . . . . . . .. Urn Leg . . . . . . . 409 TD . . . . . . . . . . . . . Solid Wood Super Lazy Susan . . . OC. . . . . . . . . . . . UDZ . . . SuperCabinet™ Version 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 CS . VDL . . . . . . . . . . . . . . . SRS . . . . . . . . . . . . . . . . . . . . . 377 TBP . . . . . . . . . 2014 DESCRIPTION INDEX Page Number Description D . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . Utility Organizer Cabinets . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vanity Angle Corner Sink Front Bottoms . . . . . . . . . . . .PP . . . . . . . . . . SuperCabinet™ Version 2. . SuperCabinet™. . . . . . TVRFV. 30″ . . 409 TDRO . . . . SB. . . . . . . . . . 374 SMLR . . . . . . . . . . . . . . . . 396 CTDK . . . . . . . . . . . . . 3DB. . 378 DRWTK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 S66 . . WCD . . . . . . . R. . . . . . . . . Square Foot . . . 377 SuperCabinet™ Gourmet . . . . . . . . . . . . . . . . . . . . . . . . . . Vanity Cosmetic Center Sink Drawer Base w/False Panel . . . VWTB . . . . . . . . . Wall China Display Cabinets . . . Spacer Block . . . . .FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377 TSTM . 408 TEP. . . VCRR . . . . . . Wall Base Double Door Cabinets . . . . . . . . 36″ . . . . Stain . . . . . . . . . . . Small Crown Moulding . . Vanity Mirror . . . . . . . . . . . . . . Universal Design Fillers . . . . . . . . . . . . . . . V . . . . . . . . . . . VDB . . . . . Toekick Drawer . . Wall China Display Cabinets w/Doors . . . . . . . . . . . . . . . . . . . . Solid Wood Crown Moulding . . . . . . . . . . . . . . . . . .. .. Overlay & Fluted) . . . . . . . . . . . . . . . . . . . . .UD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 408 SR . . . . . . . . . AER . . . . . . . . . Vanity Sink Drawer Bases w/Eight Drawers . . . . . .. . . . . . . . Vanity Hamper . . . . . . . . . . . . . . Small Scribe Moulding . . . . . Vanity Desk Legs . . . . . . . . . . . . . . . Universal Design Vanity Desk Leg . . . . . . . . . . . . . . . . . . . . . . . . Soffit Filler Moulding . 210 TABLETHLDR . . . . . . Vanity Sink Bases w/False Drawer Fronts . . . . . . . . . . . Valley Forge Moulding . . Split . Soffit Trim Moulding . . . . . . . . . . . Wall Cookbook/Recipe Organizer Cabinet . . . . . 113-117 STW . . 179. . . . . . . . . . . . . . . . . . . . . . . . . . . Toekick Cap . Valance Top Rail . . . . . . . . . . . . . . . . . . . . . . . . Page Number 355 356 392 390 327. . . Tall Panel w/Filler Attached & Authentic End . .UD . . . . . . . Under Counter Drawers . . . . . . . . . . . . . . . . . . . . . . . . VSSB . . . . . . . . . . . . . . . . . 377 SLS . . . . . . . . . . . . .WB . . . SB. . . . . . . . . . . . . . VSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .403 MV . . . . . . . . . . . . . . . . . . 180 BSCG . . . . . 178 BSC36PRP. . . 201 JSQFOOT . . . . . . . . . . . . . . Split . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stacked Wall End Cabinets Double Door . . Triple Bead Edge Moulding . Square Bar Leg . . Tilt Out Trays . . . . . . . . . . . . . . 389 JSQBARLEG3S. . . . . .. . Tall Pantry Pull-Outs . . . . VFR . . . . . . . . . . . . . . . . . . . . . .STWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . SRS . . . . 378 SSM . . . . . . . . . . . . . . . . . . . . . Spool Leg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WCRO . . . . . . . . . . . . . 209 SLSCR . . . 4VDB . . . . . . . . . . 374 SCM . . .. . . . . . . . . . . . . . BMW. . . . . Tri-View Medicine Cabinets Lighted w/Chrome Face Plate . . . . . . . . . . . . . . . . RS. . . . . . . . 388 STDW . . . . . . . . . . . . . . . . . . . .FP . . . . . . . . . . . . . . Straight Tambour Cabinets . . . . . . . Spice Rack Pull Down . . . . Vanity Sink Drawer Bases w/Six Drawers & False Panel. . . . 179 BV2SC36PRP. CORNERPOST . . . . . . . . . . . . 351 SPD . . . . . . . . . Stacked Wall Cabinets Single Door. . . . . . Universal Design Three Drawer Base Cabinets . Wall Box Column Pull-Outs (Plain. . . . . . . . . . Tapered Wood Hoods . WAGD . . . . . . . . . . . . . . . . . . . . . . . . . Utility Organizer Drop Zone Cabinet . . . . TF. . . . . . .RTUD . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . Square Island Leg . . . . . . . . . . . . . . . . . VBH . . . . . . . . . . . . . VH. . . . . U. . . . . . TLFOOT . . . . . . . Small . . . . . . . . . . . . . . . . . 374 SWVCRM . . . . . . . . . . . . . . . . . . . . . Vanity Sink Drawer Bases w/Eight Drawers & False Panel . . . . . . Spool Leg. . . . . . . . . . . Universal Design Toeboards . . . . . . . . . . . . . . . . . . . VSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stacked Wall Transition Cabinets . PRS. . . . Vanity Sink Bases SuperCabinet™ w/Tilt Downs . . . . . TVRAV. . . . JURNLEG . . . . RP. . . . . . . . . . . . . . 256 TAPLG . . . .. . . . . . . . 135 STWEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Utility Drop Zone Cabinet . . . . . . 210 SWTCRM8 . . Vanity Sink Three Drawer Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . Wall Quarter Round End Shelves . . . . . . . 118-120 WCS . .CIA . . 158 WHC . . . . . . . . . . . . .SPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 MW . . . . . . . . . . . . 156 W . . . . . . . . . . . . . . . . . . Tapered . . . . . . . . . . Wall) . . 154 WNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 WEC . . . 86-96 WTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . Window Casing—Traditional . . . . . . . . . Wood Hood Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Message Center . . . . . . . . . . . . . . . . . . . . Wall Corner Single Door Cabinets . . . . . . . . . . . . . . . . . Weave Foot . . . . . . . . . . . . . . 153 WHA . . . . . . . . . . . . . . . . . . . . . . . . . 156 BLOWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Transition Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Double Door Cabinets . . . . . . . . . . . . . . . . . . . JWHCA . . . . . . . . . . . . . . . . Weave Corbel . . . . . . . . . . . . . . . Wide Scribe . . . . . . . Wall Open Cabinets . . . . . . . . . . 92-97 W . . . . . . . . . . . . . . . Wall Three Drawer Cabinets . . . 155 W. . . . . . . . . . . . . . . 378 WGH . . . . 140 WOC . Wood Hood Canopy Arched . . . . . . . . . . . . . . . . 160 WHCA. . . . . . Wood V-Grooved Beaded Skin 1/4″ Panels . . . . . . . . . . . . . . . . . . . . . . . . Wine Storage Cabinet . . . . . . . . . . . . . . . . . . . . Wine Glass Holders . . Wall Organizers . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Corner Decorative Shelf . . . . . . . . . . . . . . . . . . . . 378 WCT . . . . . . . . . . . . . . . 132 WC . . . . . Wood Tops. Wood Hood Chimney . . . . . . Wall Corner Double Door Cabinets . . . . . . . . . 136-137 W . . . . Wall Spice Pull Down . . . . . . . . . . .VG . . . . . . . . . . . . . .VG . . . . . . 325 BP. . . . 371 Effective March 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 JWHIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 1TWT . . . . . . . . . . . . . . . 85-105 WSD . . . . . . . . . . . . . . . . . . . . . 138 W2D . . . . . . . . . . Wall Two Drawer Cabinet . . . . 157 4TWT . . . . . . . . . 409 WSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379 WSCRIBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 WQRES . . . . . . . 150-151 WO . . Wall Corner Inside . . . . . . . . . . . . . . . . . . . . Wood Hood Island Square . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 JWHCONSTR . . . . . . . Tall. . . .. Three Sided . . . . . . . . Wall Single Door Cabinets . . . . . . . . . Wall Susan Kits . . . . . . . . . . . . . . . . . . WC . . . . . Wall Vertical Lift . . . . . . . . .. . . . . . . Wall Easy Access Storage Cabinets . 159 JWHIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . Wood V-Grooved w/Triple Beaded Front 3/4″ Panels (Base. . . . 107 W2D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375 JLRINSWEAVE . . . . . . . . . 391 JWEAVEINSERTM . . Wood Hood Linear. . . . . . . . . . . . . . . . . . . . Weave Light Rail Insert . . . 106-109 WVL . . . . . . . Wood Hood Contemporary Straight . . . . . . Wall Refrigerator Cabinets . . . . . . Window Casing—Modern . . . . . . 409 W3D . . . . Wood Hood Square . . . . . TEP. . . . . . . . . . . . . . . . . . . 86-105 WEAS . . . 148 W . . . . . . . . . . . . . . . . 324 3TWT . . . . . . . . . . . . . . . Wall Decorative Shelves . . . 377 WCM . . . . . Wall Spice Rack Cabinets . . . Wall Top Hinge Single Door Cabinets . 367 BEP. . . . . . . . . . . 2014 . . 148 WSP . 153 JCORBELWEAVE . . . . 119-121 WS . . . . . . . .COA . . . . . . . . . . . . . . . . . . . . . Wall Microwave Double Door Cabinets . . Wall Two Drawer Cabinet w/Tiered Insert . . . .. . . . Wood Tops. . . . . . . . . . . . . . . . . . . . . . . . Wood Tops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396 JWEAVEFOOT . . . . . . . . . . . . . . . . . .DESCRIPTION INDEX E Page Number Description Code Wall Corner Cabinets . . . . . . . . . . . . . . . . . Wood Hood Arch . Four Sided . . . . . . . . . . 155 WC . . . . . . . . .TI . 149 WSK . . . . . . . . 158 WHCS. . . . . . . . . . . . . . . Wood Hood Island Arch . 156 MW . . . . 134 WMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Wine Racks . . . WEP. . . . . 100 W. . . . Wall Microwave Cabinets . . . . . . Wall End Cabinets . . . . . .. 157 WHS . . . . . 133 W. . . . . . . . . . . . . . . . . Weave Insert . . . . . . . . . . . . . . . .110 WTH . . . . . . . . . . . . . . . . . . . . . Wall Wine Cubbies . . . . . Wall Spice Drawers . Wall Spice Pull-Out . .. . . . . . . . . . . . 159 JWHL . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Shelf Pull Down . . 147 WSR . . . . . . . . . . .SHLFPD . . . . . . . . . . One Sided . . . . 119 W. . . . . . . . . . . . . JWHCS . . . . . . . . . . . . . . . Wall Corner Outside . . . Wood Hood Canopy Square . . . . . . . . . . . . . . . . . . . . 203 CNTYSB. . . . . . . . . . . . . . 402 DW . . . .. . . . . . . . . . . . . . . . . . . . . . . . .FH . . . . . . . . . . . . . . 318 DDR . . . JGSK . . . . . . . .WD . . . . . . 2DB. . . . . . . . . . . . . . . . . .. . . .. . . . . . . . . . . . . .. . . . . BEAS . . B. 373 CPE . . . . . . .VG . . . . . BBMSC . . JFLUTELEG . . . . . . . .RTB . .P. . . . . . . . . . . . . . . . . . . . . . JCORBELCOS13 .BTM. . . . . . . . . . . . . . . . . . . . . . . . BARLEG . . . . 39 FV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 BPPP . JBV . . . . . . . . . . . . . . . . . . . 376 BPP . . . . . . . . . . . . . . . . . . . . . . . . . 380 GREEKM . . . . . . .FHRT . . . . . . 401 BSC30PR. . . . . . . . . . . . . . . .CIW . . . . . . . . . . . . . . . . . . . . . .RTUD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B. . B. . . . . . . . . . . . .. . . . . . . . . . . . . . . .. . . . . . . 223 BRDB . . . . . . . . .. . . . . . . . . . . . . JBAROQUELEG . . . . JMETROFOOT . . . JROPELEGS . JRPV . . . . JESTATELEG . . . 155 FSHK . . . . . . 237 FRNLG . . . . . . . . . . . . . . . . . . . . . . . . . . J3SPTRING . . . . .PDO . . . . . .203 CONVERSION . . JCORBELSHKR . . . . . . . . .. . .FH . . . .. . . . 374 BRC . . . . 161 CORBELART9 . . . . . . . . . . . . . .. . . 30 DFPSLB . . . . . . . . . . . . . . B. . . . 358 BMC . . 37 EXB. . . . . . . 126 DWB. BC . . . . JACANINSERTM. . . . . 129 DW. . . . . . . . JCORBELMAD9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 216 217 215 216 217 217 218 31 213 221 220 219 236 220 219 218 220 325 221 221 222 326 338 390 376 381 381 201 202 202 39 44 406 29 32 380 171-236 172 215 214 173 174. . . . . AV . . BBM . . . . JCORBELACAN . . . 373 FPEB . . . . 130 ES . . . . . . . . 180 BSCG . . . . . . 236 BMWD . . . . . . . . . . . . .S . . . . . . . . . . . . . . . PRS. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .. . APC . .. 2DB. . . . . . 364 DB . . . . . . . . . . . . . . . B. . . . . . . . . . .PO . . . . . . . . . . . . .CRSGR . . . . . . . . . . . . . . .. JINSERTFRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 BLOWER . . . . . . 228 BOB . 207 BLS. . 402 CF . . . . JSPLEGSS . . . . . . . . . . . . . . . . . . 394 CORBELMIS9 . BCP . . . . . . . . . . . BBMSW . . . . 225 BTC . . . . . B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 190 184 187 188 182 183 186 187 235 186 189 234 173 382 227 377 377 377 228 401 204 205 222 359-362 205 206 206 206 230 231 228 177 215 371 367 BEP. . . . . . . . . . . 224 BOC . . . . . . . . .RTCIW . . . . RS. . . . . . . . . . . . . . ACOVLY . . . . . . . . . .. . . . . . . . . . . . . . . . . JLRINSCELT .RTWTCD . . . . . . . . 3DB . . . . 394 CORBELSCR6 . . . . ... . . . 394 CORBELBARO . 30 DFR5PC . . . . . . 3DB. . . . . . . . . . . . . . . . . . 233 BP . . . 170 ICM . B. . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . JCOROVLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 CABMAT . . . . . . .. . . . . . . . . . 374 Code Page Number INSERTCELT . . . 127 DW. . . . . 122-124 DW. JRCPV . B. . . . . . . . . . .SP . . . . 390 FS . . 4VDB . 402 CCM . . . . . . . . . . JLRINSBARO . . . . . . . . . . . . 402 CAPM . . . . JMADFOOT . . . . . . . . . . . . . . . .RT . . . . JCORBELCOS7 . . . . . . FTK. . . . . . . .. . .. . . . . . . . . . . . BEC . . . . . . . . . . . . . . 39 FTKFV. . . .P . . . . . . 319 DE . . 320 DDO . . . . . . . . CG. . . . B. . . . . . IVYM . . . . . . . . . . .. . . . . . . . . . . .FHRTLO. . . . 394 CORBELMIS6 . . 125 DW. . BCFW. 3DB. . . . . JCORBELOWD4 . . . . . . 188 BPS . . . . .. JROPELEG . . . 36 F . . . 43 CFP . . . . . JCORBELBIJ . . . . . . . . 34 CFRMO . . . . . . . . . . . . . 229 BMW. . . . 169-170 HP. . . . . . . .WTCD . . . . . . . . . . . B. . 378 CBO . . . . . . . . . SRP. . . 30 DGK . . . . . . . . . . . . . . . . . . . . . B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AER . . . . . . . . . . . 168 HS . . . . . . . . . . . . . . . . 397 DAB . . . . . . . . . . . . . . . . . 376 CPU . . . . 406 HL . . JSQISLLEG . . . . . . 4TWT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 CTDK . . . . .CPO . . . . . . . . . .WTCD . . . 402 DGK-BKSOCKET . . . . . . . . .. . . BBX . . . . . . . . . . . . . . . . . . . 32 FR. . . 3TWT . . . . . . . . .. . . . . 179. AUTHR . 179 BV2SC36PRP.RTLO . . . . . . . . . . . . . . . . . . . . . 160 BLS . . . . . . . . . . 357 CFNTO . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 CDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 BQRES . . . . . . .. . BCP. . . . . . . . . . . . . . . . . .FNT. . . . . . . . . . . . . . . . . . . . JFRNCNTYFOOT . .. . . .RT . . . . . . . . . . . BEP . . . . . . . . . . . . . .. . . . . . BCFW . . . . 324 FFDL. . . . . .DR . . .D . . . . . . . .WTCD . . . . 4DB. . . .. . . . . . . . 375 GROVLY . . 231 BRAIDM . . . . . . . . . . . . . . . . .. . . . . . 212 BRMCLP . . . . . . 43 CG. B. . 181 BWB . . JCORBELWEAVE . . . . . . . .RT . . . . . . RS. . . . . . . . . BWBLID . . . . . . . . . . . . . . . 230 BMW. . . . . . . . JCELOVLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CBR . . . . . . . .B . . . . JLRINSBIJ . .. . . . 32 FFP . . . . . . . . . . . . . . . . . . . . . . . JBRACKETART . . . 395 CORBELSCR9 . 30 DFSLB . . . . . . . . . . . . . . . . . . . . . . . . . .WD . . . 2DB. . . . . . . . . . . .R .. . . . . . . . . . . . . . . . . . . . . . . 4DB . . . . . . . . . .COA . B. . . . 32 FBF . . 34 CD . . . . . . . . . . . . . . . . . . . . . . . . .CIA . ACSFB . . . . . . . . . . . . . . .. . . . . . . . . . . . . . 2DB . . . . . . . . . . . . . . . . . . . . . . . . . . ADDTK . . . B. . . 379 DDFD . . . . . 124 DW. . . 381 FIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 395 CORNERPOST . . . . . . . SR . .. . . . .. . . 366 BER . . . . . . . . . . . 368 BEPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 ET . . 377 COTCROWN . . . .. . . . 381 HINGE . . . . . . . . . . . . . . . . . JLRINSMIS . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . 402 DLEGMISSION . . . . . . . . . . . FTK. . . . . . JMADEFOOT.FNT. . . . .SLS . . . . . JCORBELTRADO . . . . . . . . . . . . . . .UD . 37. . . . . . . . . . . . . . . . . . . . . . . 367 BLVDFF . . . . . . . . . . . . BCFW. .. . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . RP. . .21 . . . . . . . . . . . . . . .. . . . . . . . . . . . . FTKFV. .. . . . . . 357 FALSEPANELCLIP . . . . . . . . .P . ACO . . . . . 321 Code Page Number CS . . . . . . . . . 394 CORBELOWD5 . . . . . . . . . 3/4X . . 227 BMW . . . . . . . .. . . . . . . SR . . . .. . . . . . . . . . JCOSFOOT. . . . . . 170 HM . . . . . . . . . . . 3CDB . . . . . . .FHMIX . . . . . . . . . . JACANFOOT . . . . . . . . . 369 BEP. . . . . . . . . . . . . . . . . . . . 4DB. . . . . . 42 DVDI . . JBUFFETLEG . . . 383 ENGISLCOLUMN . . . . . JSPLEGS . . . . . . 34 CNTYSB . . .. . . . . . 207 BLSBEP . . . . . . .T . . . . . . . . . . . . . . .FD . . . . . . . . . . . . . . . . . . . 367 BPM . . . . .. . . . . . . . . . . . 2DB. . . . . .. FTKAV. 44 CIW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379 ID .. . . . . . . . . . . . . . . . . . . . . JINSERTLRC . . . . . . . . . .DS . . . . . . . . . . . . . . . . . . . 3DBB. SRS . . ANGLHEATSHIELD . . . . . . . . JACANTHUSLEG . 322 DFD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362 DWP . . ACAM . B. . . . . . . . . . . . . B. . . . ALF . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 326 FTK. . . . . . . . . 223 BWB. . . JROPELEGSS . . . . . . . . . . . . . . . . . . . . . . . 3DB. . . . . JLRINSCOS . . ISLLEG . . . . . . . . . . .PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JSQBARLEG3S . . . . . . . JESTATELEGS . 214 BV2SC30PR. . . . . . . . . . . . . . . . . . ABFOOT . . 232 BOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 226 FOLCROWN . . . . .DR . . . . . . . . JSQBARLEG . . . . . . . . . . . . . . . . . JBIJINSERTM . JCORBELCRAFTO . . . JCORBELCOS13D. . . .. . . . . . . . . . . . . . . . . .. . EXL. 373 COVECROWN . . . . . . . . . . . . . . . .. . . . .P . . . . . . . . JCRAFTFOOT . . .P. . . .. JINSERTLRT . . . . .. . . . . . . . . . . 201 CT . . . .FH . . . . . . 321 DWD . . . . . . JENGCNTYLEG . . . . . . . BCFW. JMISINSERTM . 167 HPP. . . . . . . . . . . . . . . . .CIW . .. . 178 BSC36PRP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3DB. . . . . . . . . . . . . . . . . . . . . . .DD . . . . . . . . . . . . . . . . . . 237 BFPC . . . JCORBELARTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page Number Code Page Number 1TWT . . . . . . . . .403 FB . . . .. .P . . . . . . . JCOSINSERTM . . . . . 3DB. . . . . . . . . BDW . . . . . . . . . . CG. JSOC . . . . .AEL. . . . . . . . . . . . . . . . . 320 DFF5PC . . . . . . . . . . . . . .. . JSQFOOTS . . . . . . . . . . 382 BFRC.TS . . 37. . . . BCC . . . . JCORBELMAD4 . . . . . . . . . . . . . . . 358 FD . . . 35 INSCROWN . . . JCORBELOWD7 . . . .SP . . . . JFLUTELEGSS . . . 2DB. . . . . . . . JBIJFOOT . . . . . . . . . . . . . . . JLRINSMAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2014 CODE INDEX Code F . . . .. . . . . . . . . . .PO . PRS. . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2DB. . . . JLRINSACAN. . . 207 DAB. FFDR . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 BP. . . . . . . . . . . . . . . . . . 181 BSD . . . . . . R. . JQUNANNELEG . . . . 373 CND . . . . . .. . . . . . . .UD . . . . . . . . . . JESTATELEGSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 BWBFHLID. . . . . . . . . . . . . BC. . . . . . . . . . . .. . ACSF . . . . . . . . . . . . . . . . . . . . . . . . . AUTHL. . . . . . . . . . . 376 CCO . . . . . . . . . . . . . . . . EXR . . . . . . . . . . . . .. . . B. . . .TDRO . . . . . . . . . . . . . . .. . . . JPWRPOD . . . . . . . . . . . . . . . .DD . . . . . . . . . . . . . . . . . . . . . . . 215-221 DCM . . . . . . . . .. . . . . . SRP. . . . 367 BP. . . . . BBCPO . . . . . . . . . . . . . BED . . . . . . . . 410 DRT . . 375 36 385 376 393 391 374 382 383 391 374 395 383 380 381 395 395 395 394 394 394 395 395 395 395 394 395 396 396 396 381 391 375 383 391 383 384 384 384 384 384 384 391 385 404 373 379 378 379 379 379 379 379 379 379 379 391 391 375 391 375 408 386 380 386 387 387 387 380 396 388 388 388 389 389 392 392 389 Effective March 17. . . . . . . . . . . . FTKAV. . . . . . . . 39 FTKAV. . . . . . . . . . . 382 FFRC . . . . . . . . . . . 124 DW. . . . 375 ENGBARCOLUMN . . . . . . . . . . . . . . .FNT. . . . . . 386 DOOR . . . . . . . . . . . . . . . . . . . . . . . . 381 BHRES . . . . . . . . . . INVFRM . .VG . . . 362 EGD . . . . FTKFV. JRDLEG . . 323 FDWB . . . . . . . . . . . . . . . . . . . . . .CM . . . . . . . . . . . . . . . . 375 DER . . RP. . . . . . . . . . JFLUTELEGS. . ACS . . . . . . . . . . . . . . . . . JCOSMOLEG . . . . . JSPLEGT . . . JFRNCNTYLEG . .. . . . . . . . 397 CLTCROWN . . . . . . . . . . . . . . 404 HINGERESCLIP . . . . . . 399 DRWTK . . . . . . . . . . . . . . BCF . . 357 F. . 373 INSERTBARO . . . . . . . . . . . . . . .. . . . . . . . . . .. . . . . . . .21 . .. . . . . . . . 208 DAPNL . . . . . . . . . . . . B. . . . . 3DBB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FH .TOP . . . . B. SRS . . . . . . . . . . . . .RTPDO . .UD . . . . . . . . . . . . . . . . 409 CUDD . . .UD .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 BWC .P. . . . 363 DOORSAMPLE . JCORBELMAD6 . . . 371 BEPF . . . . . . . . . 229 BO . . JLRINSWEAVE. . . .. . . . . . . . . . . . . . . . . . . . . 394 CORBELCELT . . . BBMWD . . . . . . . . . . . . . . 208 BF . . . . . . . . .. . . . . . . . JMADINSERTM . . . . . . . . . . . . . . . . . . . JSQFOOT . . 383 ER . . . . . . 36 TWH . . . . 409 TED . . . . . . . . . . . . . LSP . . . . . . . . . 195 SB. .WDE . . . . . . . . . . . . . . . . LIFOOT . OC. .. . . . . .S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OCD. .. . . . .UD . . . 392 TMLC . . 408 STDW . . . . . . 148 W2D . . . . . . . . . . . . . . . . . . . 328-329 VACSF . . . . . . . . . JWEAVEINSERTM . . . . . . . . . 388 SPTRINGEND . 144 Code Page Number WB . . . . . . . . . . . . . . . 409 TV . . . . . . . . . . . . . . . . . KNOBH . . . . . . . . MC . . . . . . . . 350 VSSB . . . . . . . . . . . . . . . . . PDO. . . . . . .STS . . . . . . 388 396 382 382 390 390 391 375 387 158 157 158 159 159 157 405 378 376 352 407 353 394 392 407 392 407 380 378 373 213 353 355 296 45 386 386 33 401 409 351 140 261-290 237 380 276-290 407 380 276-295 376 358 297-311 43 408 407 29 403 392 407 373 322 47 255 255 405 259 380 35 386 41 41 41 41 382 381 381 375 224 37. . . . . OCINSTALLKIT . . . . WGH . . . . . . . . . RRC . . .. . . . . WSD . WHC . . . . . . . . . . . 376 TD . ROSETTEMIS . . WEAS . 408 TPP . . . . . . . . . . . 397 TCM . . . . . . . . 377 SHELFPEGS . . . . . . . . . . . 376 SBP . WCM . . . . 197 SB. PULLH . . . . . . . . . 210. . . . . . . . . . . . . . . . . . . . . . . . . . . 38. . . . .. . . . . . . . . . . . .TOP . . . . . . . . . . WEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PY . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . WSP . OCD. . . . . . . .. . . . . . .UD . . . RECTKL . . . . .. . . . . . . . .. . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . 193 SB. . . . WCD . . . . .. . . . . 377. . . . . . . 374 TABLETHLDR . . . . . . . . . . . . . . . . . . . . . . 331 VTK . . . .STCM . . MV .FP . .. . . . . . . . . . . . . . . . . . . . . . . RD . . . . . . . . . . . . . . . .. . . . . . . . . .VG . . 42 VU . . . . . . . .WD. . .CDY . . . .. . . . . . . . . .. . . . . . . . . . MTUK . . 200 SB. . . . . . . WSK . OC . . . . . . . . WEPS . . . . . PLBLOCK . . 352 VCC. . 408 SSM . 374 SMLR . . . . . WBCPO . . . . . . . . . . LB . . . . . . . . . . .STSCM . OMC . . . . . . . . . . WS . 199 SBCADDY . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OCD. . . . . . . 237 VER . . . . . . . . . . . . 409 VDB . . . 354 W. . PR . . . . . . . . . . . . . . 332 VSB. . . . . . . . . . 192 SB. . 367. . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JTILEMISSION . . . . . . . . . . . . . . . . . . . . . . . . . . . SHMD. . . . . 392 TLFOOT . . . . PRMD. . .. . .. . . . . . 335 VFR . . . . . . . . . . . . . . . . . . 159 TWHBLOWER . . . . . . . . . 245-246 UCD . . 198 SB. . . . WTH . . . . . . . . . . . 374 SWLCRM . . . . . . . . . . . . . . . 351 UDZ . . . . . . . . . . .. . . . . . JSRC . . . . . . . . . . . . . . . . . . . LOSC . . 376 SMCORBEL . . . .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . 106-109 W3D . . . . . . . 312 W. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . PTU . . .FH . .SHLFPD . . . . . . . . 154. . . . . . 408 SPLEG .. ROSETTESCR . . . . . . . . . . . . . .403 SPD . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . LBRM . 381 TSTM . . . . LGSQFOOT . . . . . . . . 353 VV . . . . . 377 TCD . . . . 209. . . . . . . . . . . .. . . . . RECTKALL . .. . . . . . . . 190 TDRO . . . . . . 393 SPTRINGROPE . . . . . . . . . . . . . . . . . . . . . . . JWHCS . . . . . . . . . MD. . . . . . 408 SBE . . . . . . . . . . . . . . . . . . TVRFV. . . . . . . . 403 SLS . . . . . . . . . . . . . . . . . JURNLEG . . . . . OCD. . . 348. 135 STWTC . . . . . . . . . . . .RT . 209 ST . 237 TKC . . . . .. . . . . . . . . . . . 352 VM . . . . . . . . . . . . . . . . . . . . . . . . . RT . . . . . MD. . . . 127 STR . . WTC . . . . . . . .FCC .. . . . . . 393 SPTRINGREED . . . . . . LIDSTAYHD . . . . . 376 SBM . . . . . 253 UEAS. . . . . . . . . . . . . . . . . . 193 SB. . . . . . . . . . PRB . . . . . . . 374 SWTCRM8 .. . . . . . . . . . . . . . . . . .. . .. . . . . . . . . . . .CCST. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-105. . JTILEACAN . . . . . . . . . . . WHS . . . . . . . . . . 366 TF . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCPDRWR . . . . . . . . . . . . . . . . . . . . . . . . PDOPOSTS . . . . . . . . . . . . . . . . . . . . . 381 SK . . . . . 408 STR8 .. . . . . . . . . . 378 SWTCRM8 . . . . . . . . 408 SHKRCRM .STUD . . . . . . 314-315 TBCD . . . . . . . . . . . . . . METISLCOLUMN . . . . . . . . . 378 VH. . . . . . . . . . . . . .. . . . . . . . . . 256 TROSETTE . . . . . . . . . . . . . .. . . . 143 STAIN . . . . . . . . .FH . . . . . 247-250 UOC . . . . . . . . . .STWB . . . 195 SB. . . . . . . . 212 SLSW . . . . . . . . WEP. . . . . . LO24DP . . . . . . . . .. . . .ST . TEP. . . . . . . . . . . . . . . . . . . . . . .D . . . . . . . . . LGCORBEL . . . . . . . LIDSTAY. . .. . . . . . . . . . . . . . . . . . . . . . . RECTKBK .. . PE . . . . . . . . WCT . . . . . . . . . . . . . . . . . . . . . . 408 TAPLG . .. . . . 370 TEP. . . . . . . . . . . METBARCOLUMN . . . . . . . 395 SCM . . . . . . . . . . . . .. . . . . . . . 198 SB. . 191-193 SB. . . . . . . . . . . . . . .UD . . . . . . . . . . . . SCPDRWL. . . . . . . . . . . . .. . . . . . . . . . . . OL . . . . ... . . . . . . . . . . . 236 SLSCR . . . .WB . . . . . . . . . . . . . . . . . . . .. . . . . PPP . . . .. . . . . . . OCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 VDL . . . . . .. . . . . . . . . . . . . . . 374 SWVCRM . . . . . . . . . . . . . . . . . 378 TKP . . . . . .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . 374 SCPDRW. . . . . . . . . . . .STSCDY . . .WD . . . . . . . . . . JWEAVEFOOT . . . . . .CC . . . . . .. . . . . 327. . . . . . . . . . . .. . . . . . . . . . . . . . . . . 371 TEP . . . .. .. . . . 46 SHOVLY . . 392 TB . . . . . . . . . . . . . . . .STCDY . . . . . . . . . . . . . . . . . . 160 U . . . . . . . 377 SSS . . . . . . . 189 TD. . . . . . . . . . . 399 RTBKSXSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . WO . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .BTM. . . . . . . . . . WNR . . . . . . JTULIPLEG .D . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 SHM . TEP.. . . . . . 330-331 VSB. . . . . . JWHIA . . . . . . . . . .SCM. . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .U . . . . . . . . . . . . . . . . . . 376 SBS . . .. . . . . . 134 STWEC. . . . . . . . . . . . . . . . . . .CODE INDEX G Code Page Number Code Page Number JSQISLLEG3S . . . . . . . . . . . . . . . RDLEG . . . . . . . . . . .CM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 W. . . . . . . . . . . . . . . . . . . 380 SHMD. . 258 V .. . . . . . . . . . .377 TUK . . . . . . . .TI . . . . . . 372 VDLUD . . . . . . WOC . RPM . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .DD. . . . . . . . . . . . . . . . . LCHAMPERLNR . . . . . . . . . . . . . . . . . . . . . . . . 337 VCRR . . . . . . . . . . . . . . . . . . . . . 332 VSD . . . . . . P. . . . . . . . . . . . . . . . . . . . . . . LCRH . LSHAKER . . . . . . . . . .VG . . . . . . . . . . . . . TVRVV . . . . . 374 SPACERBLK . . . . . . .. . 200 SFM . . . . . . . . . . . . . . 371 TEP. . . 378 TB8UD . . . . . . . 345 VCCB . . OCD. LO. . . . . . 408 S96 . . . . . . . . . . . . . . 211 SLS. . .. . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .. . LRM . . . . . . . . . 354 VP . . . .. . . 380 SWCRM . . . . . . . . . . .. .. .COA . . . . . JWHL . . .TOP . . . . . . . . . . . . . . 194 SB. .. OCM . 331 VSB. . . . .. . . . . . . . . . . . . . . . . . . . . . . JWHCA . .. . . . . . 334 VBEP . . . . . . . . . . . 252 US . . . . . . . . . . . . . . . . .BC . . . . . . . . .PP . . . . . . . . . . . . . . . . . . . . . . 349 VSD. . . 41 TKTLFOOT . . . . . . . . . . . . . . . WTCD . . . . . . . . . . . . . . . . . . . . . . 132 W. 380 VWTB . . . . . . . . . . MW . . . . . . . . . .FCCST . . . . . . . . . . . . . . . . . . . . . . . OGEEM . . .AEL. . . . . . . 235 SB. . . . . . . . WMC . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 356 TOT . . . . . . . . . . . . . . . . . . . . . . . 139 SV . . . . . .. .. . . . . . . . . . . .. JWEAVELEG . . . . . . . . . . . . . . SCPDRWB. . .357 SB . . . . . . . . . PRMD. . . . . . . .. WBMW . . . . 258 US. 238 TBC . . . . . . 236 SB. WHA . . . . . . . . . . . . . 393 SPTRINGSPOOL . . . . . . . . WEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..CIA . . . . . . . . . . . . LC . . . . . . . . . 355 TVRAV. . . . . . . . . . . . . . . . . . . . . . . . . . 377 TBP . . . . . . . . . . . . 370 TEPS . . 393 SR . . . . . 191 SB. . . . . . . . . . . 345 VSB . . . . . . . MIXKIT. MCC . . . . . OCD. . WCRO . . . . . MIP . . . . . . . . . . . . . . . . . . . . . . . .SCDY . . . . . . . . . . . . . . . . . . . . . . .. . WHCA . . . . . JWHCONSTR . . . . . MD. . . . . . . . . . . . . . .FP . . . . . . . . . . . . . . . . . . . LT . . . . . . . . . . . . 354 W . . . . . . . . . . . . . . 196 SB. . .. . . . . . . . . . WSCRIBE . . . . .. . . . . . . . . . . . . . . . . WSR . . . . . . . . . . . . . . . 110 WAGD . . . 107 W2D. . . . . . 373 SHLFPD . WFBC . . . . . . . . WVL . . . . . . . . 176 146 141 118-120 151 378 143 155 378 106 134 372 371 371 366 313 409 156 157 158 158 157 156 376 153 154 150-151 136-137 156 153 377 155 409 147 149 138 397 86-96 92-97 Effective March 17. . . . . . . . . . . . . . . . . . . . . . . . 106. . . . . . .. . . . 377 STRTHEATSHIELD .AER . 367 VBH . . . .. . . . . . . . . . . . . . . . . . . . WMF . . . . PENFALSEPNLCLIP . . . . . . . . . . . . . . . . . . .. . . . . . 211 SM . . . 394 SMCOVECROWN . 199 SB. . . . . . . . . . . . . . . . . . . 350 VB . . . . . 197 SB. . . . . . . . . . . . . . 335 VCCDB . . . . . . . . . . .. . . 148 W. . . . . . . . . . . . . . . . . . . . . . . . . . 111-116 STWEC . . . . . . . .TOP . . . . . . . . .FH . . . ROSETTCELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 SB. . . . . . . . . . . . . . . . 338 VS3D . . . . . . . . . . .. .SPD . . . . . . . . . . . .. . . . . . . . 251 UOCDZ . . . . 406 STW . . . . . . . . . PDM .. . . . . RECTKR . . . . . . . . . . . QRM . . . . . JWHIS . . . PTUP . . . . . . . . . . . . . . . . . . . . . . 210. . . . . . . . . 2014 . . . WHCS . . 350 VACSFB . . . . . . . . . . . . . . . . . . . . . . WSC . . . . . . . . . . . . . . . . . . . . . . WED . . . . . . . . . . . . . . . . . . 316-317 Code Page Number TBEM . . .. . . . . . . . . 31 SFB . . . . . . . . . . . . . WC . WCS . . . . . . . . . . . . . . 339-347. . . . . . . . . . .DD. . . . . . . . . . .. OC135 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239-244 U. . . . . . . . . WQRES . . . . . . . . . . . . Hickory is a strong. Knot Cluster (cluster of tight sound knots) − To be expected in Rustic Alder. Holes created by open knots pass completely through the door and are desirable for this rustic look. These exaggerated characteristics are to be expected and are considered desirable in Hickory cabinetry. This contrast in color can appear in a single door panel. sap runs. While Maple typically features uniform graining as compared to other wood species. All wood will age with time and the finish will darken. wood species exhibit other defining characteristics. Therefore. varying grain patterns. Sound Closed Knot (not moveable) − Expected in Rustic Alder up to approximately 3″ diameter. Maple is a close-grained hardwood that is predominately white to creamy-white in color. bird pecks. This is a sought-after quality in Cherry cabinetry. 2014 1 CHARACTERISTICS Alder has a straight fine textured grain similar to Cherry and Maple. ranging from white to dark brown. Cherry is characterized by its red undertones. knots. heavy hardwood known for distinctive graining patterns. Worm Holes/Pin Holes (can go through door) − Can be expected on Rustic Alder up to approximately 1/4″ diameter. Color differences or changes in wood can also be caused by exposure to harsh chemicals. Effective March 17. characteristic markings may include fine brown lines. Note: 3/4″ diameter is about the size of a penny. extreme heat or moisture. open-grained hardwood that ranges in color from white to pink and reddish tones. yellow and even black may appear due to mineral deposits. These markings make the wood unique and contribute to its enduring beauty. Although classified as a hardwood. This distinct graining is considered a desirable quality. Rustic Alder is characterized by its light brown and reddish undertones and may contain a variety of pin holes. creating visible mineral tracks. such as mineral deposits/streaks. These traits are natural and serve to enhance Maple’s natural beauty.CHARACTERISTICS OF WOOD TYPES No matter which species you choose for your new kitchen or bath cabinetry. Streaks of green. Stains are likely to exaggerate the difference between open and closed grains and other markings in wood. it will darken when exposed to different types of light. As hardwood ages. . Oak is a strong. small cracks. Worm Tracks − Can be expected on Rustic Alder in sizes up to approximately 1/8″ wide by 8″ long. Sound Knot with Cracks − Expect sound knots with open cracks up to approximately 1″ in length. bird pecks and mineral streaks. tight pin knots are sometimes present. Grain variation and color change should be expected. Alder may exhibit grain and color variations. Cherry is a close-grained wood with fairly uniform texture. Oak may also contain wormholes and wild. rich brown. but may vary in color from white to a deep. Some knots may have small holes through the panel. Hickory also contains random knots and wormholes that further contribute to a varied appearance. care must be taken as it will dent and mar easily. Contributing to its dramatic appearance is a wide variation in color and streaking. This is especially true for Cherry. the wood will contain color difference caused by variations in minerals found in the soil. please keep in mind that no two pieces of wood are exactly the same. In addition. and those who select it expect this evolution. Unsound Knot (moveable core) − Not to be expected. revealing pin knots and curly graining. sapwood can be distinguishable from the heartwood. with occasional reddish-brown tones. Larger holes will not be filled. wavy or curly graining. mineral streaks. and grain variation. Open Knot (through door) − Expected in Rustic Alder with open area up to approximately 3/4″ diameter. Additionally. open and closed knots of various sizes and colors. pin holes and wormholes. it is moderately light in weight and considerably softer than other species. We then add the glaze. which accentuates the grain’s natural attributes. electronic presentations can only do so much. adding depth. Thermofoil doors and drawer fronts feature a shaped MDF core covered with a seamless vinyl material on the face and edges. PureStyle™ Laminate is wrapped around door rails and panels (versus form pressed onto an MDF slab like thermofoil) and has a clear pre-impregnated top coat applied to it for durability (Buchanon PureStyle™ has an oven cured top coat). It’s important to both see and touch actual finished samples to ensure your satisfaction. First. as glaze may collect in the corners and grooves. Effective March 17. 2014 . CHARACTERISTICS OF GLAZING/PAINT Characteristics of Glazing A professional layer of glaze can add another layer of beauty to your cabinets. • Printed materials and online.CHARACTERISTICS OF PURESTYLE™ LAMINATE & THERMOFOIL PureStyle™ Laminate is a durable laminate material that provides superior abrasion resistance and meets/exceeds all of the KCMA performance standards. even appearance to varied coverage. • Glazing will range from a consistent. by hand. and a melamine layer on the back. This is a result of natural expansion and contraction of the genuine hardwoods used in the manufacturing of this product. contemporary feel that is also at home in a more traditional setting PureStyle™ trim items will feature a matching painted finish except where noted in product specifications. Characteristics of Paint or Opaque Finish Paint may develop hairline cracks in the finish. yet attractive finish offers care-free maintenance. Hairline cracks are not considered a defect in the cabinetry or finish.. The lineals and core panel material are made of MDF to ensure a consistent and stable product. The vinyl material is applied to the MDF with an adhesive using heat and pressure to create a product with excellent wear and heat resistance properties. These doors offer the durability of a laminate and the beauty of paint while bringing peace of mind to those who care about creating a better environment — both inside and outside of their homes. your cabinets will have: • A sleek surface • A design that replicates a painted finish with optimum durability • A fresh. Molded decorative door profile with a durable. • You should expect the result to yield a subtle to dramatic look based on the complexity of a cabinet door’s design. In addition to a uniform appearance. What to expect from glazed cabinetry. most notable around the joints. CHARACTERISTICS 2 PureStyle™ doors can be distinguished from painted cabinets by their picture perfect distribution of satin smooth color.. dimension and an understated sheen that’s guaranteed to endure. our craftsmen apply a wood toner. most beautiful finish. 7. Final Inspection – This last inspection is very thorough. clear. emphasizing the cabinet’s natural wood grain. 3. Catalyzed Sealer – A tough. catalyzed sealer is hand-sprayed on to protect the grain from moisture. Maple. . and Rustic Alder is the essential first step of Diamond’s 12-step finishing process. Hickory. we hand-sand the material one last time. 2014 3 12-STEP FINISHING PROCESS 4. Wood Selection – The selection of the finest woods including Alder. enhancing the naturalistic wood appearance. Hand-Sanded – To achieve an ultra-smooth finish. 12. 8. 9. Final Top Coat Cure – The top-coat is cured to guarantee the strongest. ensuring quality and beauty. allowing for a wood surface that is free of dust particles. 2. Dust Removal – The resulting loose dust particles are removed from the surface of the wood. 11. Achieving Natural Wood Tone – Toner is applied to selected finishes. Catalyzed Top-Coat – A premium quality catalyzed clear top-coat is applied to protect the wood from environmental elements. the sealed wood is oven cured to lock in the beauty of wood. Cherry. Our gift to you is that every cabinet is crafted with care. Drying Process – For added durability. 5.DIAMOND CABINETRY’S 12-STEP FINISHING PROCESS 1. Effective March 17. Removal of Excess Stain – The wood is hand-wiped to remove excess stain. 10. both with and against the wood grain. 6. Stain Application – A hand-sprayed deep penetrating stain is evenly applied to all surfaces for even coverage on all profiles. Sanded to Perfection – Our sanding utilizes a fine grit paper. Oak. This process is completed on a vacuum table. – Don’t over-do it. New construction intensifies this issue since the heat is on but no one is living in the home to raise the humidity levels. toekicks. This usually works very well because even low humidity environments stay between 20% and 70% in normal years with typical cooking and washing activities. some doors can be exposed to conditions that are below 20% relative humidity for weeks at a time.75 –0. Conversely. It takes time before the wood returns to normal after any correction to the environment. Some ways this may be accomplished are installing a whole-house humidifier on the furnace.32 0.HUMIDIFICATION The natural response of wood to changes in humidity is much more dramatic than most people realize. For your own safety. cabinet doors are typically manufactured at a targeted range of 40% – 50% relative humidity.34 0.25 0. backs. Total Potential Movement (inches) of solid wood panels HUMIDIFICATION 4 Species Panel Dimension (inches) (a) Winter (b) Summer (c) Annual Range Rustic Alder 19. In extremely cold.65 Maple 19.75 –0.49 0. we recommend that you wear a protective mask to prevent breathing wood dust.25 0.27 0.51 Hickory 19. – Maintain the humidity at or above 20% when the temperature is below 20°F and over 35% when the temperature is above 20°F.75 –0.26 0.10 0.31 0. and (c) the total potential range of dimension changes from a muggy summer to a cold dry winter. where in-home humidity exceeds 70% relative humidity for extended periods of time. sanding. or placing pans of water near the heat registers. CARB COMPLIANCE: Diamond is committed to offering solutions that meet or exceed air emissions rules and regulations. bottoms. 2014 . you are likely to generate wood dust.75 –0. running a portable humidifier in key rooms.75 –0. WOOD DUST WARNING: When cutting. All composite wood products used in the construction of our cabinets for end panels. Significant condensation on windows is a sign the humidity levels are too high for outside temperature conditions. (b) how much a cabinet door is likely to expand in excess humidity. Exposure to sustained conditions such as these would cause panels to shrink and will not be considered defective.31 0. or shaping cabinets or wood products. and corner blocks are compliant with the California Air Resources Board (CARB) regulations for formaldehyde emissions.63 Notice the annual dimension change for a solid wood panel can approach three-quarters of an inch! For this reason. Reasonably accurate digital thermometers-hygrometer units are available to measure humidity. dry winters. Steps Consumers Can Take To Protect Real Wood Furnishings – Keep an eye on the humidity inside the home. We also recommend eye protection to avoid injury by flying wood chips or sawdust during cabinet installation. – Recognize that finished wood responds to humidity over several days to several weeks. Here is a table showing (a) how much a cabinet door panel is likely to shrink in a low humidity environment. sawing. Effective March 17. panels will swell and this will not be considered defective.59 Oak 19. shelves.52 Cherry 19. tops. 2014 DOOR STYLES 5 .FULL OVERLAY DOOR STYLES Addison Square (page 8) Anden Square (page 8) Aurora Square and Arch (page 8) Breman Square (page 10) Buchanon Square (page 11) Catalina Square (page 12) Cullen Square NEW (page 13) Hanlon Square NEW (page 14) Leeton Square NEW (page 15) Liberty Square (page 15) Montgomery Square (page 16) Shiloh Square (page 17) Sterling Square and Arch (page 18) Sullivan Square and Arch (page 18) Caldera Square (page 11) NEW Bailey Square and Arch (page 9) Benson Square (page 9) Carson Square (page 12) Cartright Square (page 12) LaGrange Square (page 14) Laureldale Square (page 14) Rothshire Square (page 17) NEW Sumner Square (page 18) Selena Square (page 17) Trystan Slab (page 19) Effective March 17. 2014 .PARTIAL OVERLAY DOOR STYLES DOOR STYLES 6 Bayport Square and Arch (page 9) Bradshawe Square (page 10) Brighton Square and Cathedral (page 10) Brittany Square and Cathedral (page 11) Covington Square and Cathedral (page 13) Crandall Square and Arch (page 13) Lynton Square and Cathedral (page 15) Monterey Square and Arch (page 16) Ridgefield Square (page 16) Windham Square and Arch (page 19) FULL AND PARTIAL OVERLAY SPECIFICATIONS Full Overlay 1/4” 1/2” Partial Overlay 2” 1” 1/8” 1/8” 1/4” 1” 2”*** 1/2”* 1/4” Wall with Butt Doors 1/2” Utility Cabinet Base Cabinet 1” Wall with Butt Doors 2” 1/4” 1” 1/4” 1” 1/4” 1” 1/4” 13/4” Utility Cabinet Drawer Base** 1/4” Base Cabinet Drawer Base** 1” *1″ on 90″ high utilities **34 1/2″ high application shown ***2 1/2″ on 90″ high utilities. 1 1/2″ on 93″ high utilities Effective March 17. Maple door center panel will be constructed of MDF material unless Heirlooming or Distressing technique is specified. • See reference images for wood grain direction on all other door styles. Door and Drawer Front Side Profiles • Veneer and MDF components are shown with grey shading on side profiles. expansion. and contraction. or an Opaque Glaze finish is ordered. Cherry • When Cherry door styles are ordered. an Opaque finish. 2014 . MDF provides a smoother finish when painted. Grain Grain Grain Grain DOOR STYLES Wood Grain • Shaker door styles (Liberty and Montgomery) have a vertical grain direction on the drawer front center panel. Rustic Alder • See trim section for availability of Rustic characteristics on trim items. Maple • When an Inspired Collection Opaque (excludes Storm). and is more resistant to warping. • Base cabinets ordered in Arch/Cathedral will have Square doors. 7 All Door Styles • All doors and drawer fronts are 3/4″ thick unless otherwise noted. it is recommended to apply a finished end option or a veneer end panel for exposed ends due to the natural aging of Cherry. Effective March 17.DOOR STYLE SPECIFICATIONS Arch/Cathedral • 9″ wide wall cabinets will come in Arch or Cathedral if an Arch or Cathedral door style is selected. Solid wood components do not have shading. DOOR STYLES Addison Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — — — — ✓ 311/64” 8 Square Base DOOR STYLES • • • • • door profile Square Wall Square Base and Square Wall Doors Thermofoil MDF Raised Panel Full Overlay 1″ Raised Profile Drawer Front Cashmere has Natural Maple Laminate Cabinet Interior Anden 1” drawer front profile • White has White Laminate Cabinet Interior • 7 7/8″ and 8 1/2″ wide doors feature a unique raised profile due to the narrow panel width. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — ✓ — — — 21/2” door profile Square Base Square Wall • Square Base and Square or Arch Wall Doors • Solid Raised Panel • Full Overlay Arch Wall 1” drawer front profile • 1″ Raised Profile Drawer Front • Distressing Available Effective March 17. 2014 . A 3″ filler or heat shield is required between any thermofoil surface and any heat source to be in compliance with cabinet warranty. Failure to use a 3″ filler or heat shield will void the cabinet warranty. • Thermofoil will not withstand sustained temperatures in excess of 170°F. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — ✓ — — — — 21/8” 21/2” 21/2” Optional Drawer Front: Slab (DFSLB) NEW door profile Square Base drawer front profile drawer front profile 10″+ Square Wall • Square Base and Square Wall Miter Doors • Solid Raised Panel • Full Overlay Aurora 3/4” optional drawer front profile • 5-Piece Drawer Front Mitered to Match Door • Distressing Available • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — — — — — — DOOR STYLES Square Base 3/4” 21/8” 1” door profile Square Base Square Wall • Square Base and Square or Arch Wall Doors • Solid Raised Panel • Partial Overlay Benson drawer front profile Arch Wall • 1″ Raised Profile Drawer Front • Distressing Available • Reverse Bevel Profile. Effective March 17. Decorative Hardware Not Required Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — — ✓ — — 113/16” 35/16” 35/16” Optional Drawer Front: Flat 5-Piece (DFF5PC) 3/4” Square Base Square Wall • Square Base and Square Wall Doors • Laminate Wrapped MDF Slab Drawer Front • Laminate Wrapped MDF Door Rails with a Flat Center Panel door profile drawer front profile optional drawer front profile (top and bottom) optional drawer front profile (sides and 10″+) • Full Overlay • White Laminate Cabinet Interior • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware.DOOR STYLES Bailey Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 21/2” 21/2” Optional Drawer Front: Flat 5-Piece (DFF5PC) 9 door profile Square Wall • Square Base and Square or Arch Wall Doors • Veneer Raised Panel • Full Overlay Bayport drawer front profile Arch Wall optional drawer front profile • Profiled Slab Drawer Front • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. 2014 . 2014 . Decorative Hardware Not Required Effective March 17. Decorative Hardware Not Required DOOR STYLES Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil ✓ ✓ — ✓ ✓ — ✓ — 21/4” 3” 3” Optional Drawer Front: Flat 5-Piece (DFF5PC) Square Base door profile Square Wall • Square Base and Square Wall Doors • Veneer Flat Panel • Full Overlay Brighton optional drawer front profile (top and bottom) 3/4” drawer front profile optional drawer front profile (sides and 10″+) • Slab Drawer Front • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware.DOOR STYLES Bradshawe Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil ✓ — — — — — ✓ — 21/8” 10 3/4” door profile Square Base drawer front profile Square Wall • Square Base and Square Wall Doors • Solid Raised Panel • Partial Overlay Breman • Profiled Slab Drawer Front • Distressing Available • Reverse Bevel Profile. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — ✓ — — — 21/8” door profile Square Base Square Wall • Square Base and Square or Cathedral Wall Doors • Veneer Raised Panel • Partial Overlay Cathedral Wall 3/4” drawer front profile • Profiled Slab Drawer Front • Reverse Bevel Profile. DOOR STYLES Brittany Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — ✓ — — — 21/8” 11 1” door profile Square Wall • Square Base and Square or Cathedral Wall Doors • Solid Raised Panel • Partial Overlay Buchanon Cathedral Wall • 1″ Raised Profile Drawer Front • Distressing Available Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — — ✓ — — 21/4” 21/4” drawer front profile door profile Square Base Square Wall • Square Base and Square Wall Miter Doors • Laminate MDF Flat Panel in Laminate Wrapped MDF Door and Drawer Rails • Full Overlay Caldera DOOR STYLES Square Base drawer front profile NEW • 5-Piece Drawer Front • Standard Natural Maple Laminate Cabinet Interior • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. 2014 . Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 21/4” 3” 3” Optional Drawer Front: Slab (DFSLB) Square Base Square Wall • Square Base and Square Wall Miter Doors • Veneer Flat Panel • Full Overlay door profile drawer front profile (top and bottom) drawer front profile (sides and 10″+) 3/4” optional drawer front profile • 5-Piece Drawer Front • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Effective March 17. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — — — — ✓ 27/64” door profile 1” Square Base • • • • drawer front profile Square Wall Square Base and Square Wall Doors Thermofoil MDF Raised Panel Full Overlay 1″ MDF Raised Profile Drawer Front • White Laminate Cabinet Interior • Thermofoil will not withstand sustained temperatures in excess of 170°F.DOOR STYLES Carson Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil ✓ — — — — — ✓ — 15/8” 21/2” 21/2” Optional Drawer Front: Raised 5-Piece (DFR5PC) 12 door profile Square Base 3/4” drawer front profile Square Wall • Square Base and Square Wall Doors • Solid Raised Panel • Full Overlay Cartright optional drawer front profile (sides and 10″+) • Profiled Slab Drawer Front • Distressing Available • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Availability DOOR STYLES optional drawer front profile (top and bottom) Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — — ✓ — — 113/16” 35/16” 35/16” Optional Drawer Front: Slab (DFSLB) Square Base • • • • door profile Square Wall Square Base and Square Wall Doors Laminate Wrapped MDF Door and Drawer Rails Laminate MDF Beaded Panel Full Overlay Catalina • • • • center panel top view drawer front profile (top and bottom) drawer front profile (sides and 10″+) 3/4” optional drawer front profile 5-Piece Drawer Front White Laminate Cabinet Interior 7 7/8″ and 8 1/2″ wide doors and drawer fronts do not have a beaded center panel. Effective March 17. 2014 . See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Failure to use a 3″ filler or heat shield will void the cabinet warranty. A 3″ filler or heat shield is required between any thermofoil surface and any heat source to be in compliance with cabinet warranty. DOOR STYLES Covington Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — — ✓ — — — 21/8” 13 door profile Square Wall • Square Base and Square or Cathedral Wall Doors • Veneer Flat Panel • Partial Overlay Crandall Cathedral Wall • Profiled Slab Drawer Front • Reverse Bevel Profile. Decorative Hardware Not Required Effective March 17. Decorative Hardware Not Required Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 21/8” door profile Square Base Square Wall • Square Base and Square Wall Doors • Veneer Flat Panel • Full Overlay 3/4” drawer front profile • Profiled Slab Drawer Front • Reverse Bevel Profile. 2014 . Decorative Hardware Not Required Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ ✓ — — — DOOR STYLES Square Base 3/4” drawer front profile 21/8” Optional Drawer Front: Raised (DFPSLB) door profile Square Base Square Wall • Square Base and Square or Arch Wall Doors • Solid Raised Panel • Partial Overlay Cullen NEW Arch Wall 3/4” 1” drawer front profile optional drawer front profile • Profiled Slab Drawer Front • Distressing Available • Reverse Bevel Profile. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 3” door profile Square Wall • Square Base and Square Wall Miter Doors • Solid Raised Panel on Door and Large Drawer Fronts • Full Overlay drawer front profile door profile Square Wall Square Base and Square Wall Miter Doors Solid Reverse Raised Panel Full Overlay 5-Piece Drawer Front Mitered to Match Door Square Base 3/4” drawer front profile Square Wall 21/2” drawer front profile 3” drawer front profile 10″+ • 5-Piece Drawer Front Mitered to Match Door • Distressing Available • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Effective March 17. • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. 2014 .DOOR STYLES Hanlon NEW Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 21/2” 14 door profile Square Base • Square Base and Square Wall Doors • Veneer Flat Panel LaGrange • Full Overlay • Profiled Slab Drawer Front Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — DOOR STYLES Availability Alder 21/2” 3” Square Base • • • • Laureldale 3” drawer front profile 10″+ • Faux Inset Design. Recommended for use with Faux Hinges (see page 404). • 1/4″ space filler or extended stile modification is necessary when applying faux hinge (strap or barrel) on varying depth cabinet or next to an appliance to allow for full door swing clearance. 2014 DOOR STYLES Square Base drawer front profile 10″+ . Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — ✓ — — — — — 21/8” door profile Square Base Square Wall • Square Base and Square or Cathedral Wall Doors • Solid Raised Panel • Partial Overlay Cathedral Wall 1” drawer front profile • 1″ Raised Profile Drawer Front • Distressing Available Effective March 17. • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware.DOOR STYLES Leeton NEW Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — ✓ — — — — 21/8” 21/2” 21/2” Optional Drawer Front: Slab (DFSLB) 15 drawer front profile door profile Square Wall • Square Base and Square Wall Miter Doors • Veneer Flat Panel • Full Overlay Liberty • 5-Piece Drawer Front Mitered to Match Door • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 11/2” 21/4” Optional Drawer Front: Flat 5-Piece (DFF5PC) NEW center panel top view door profile Square Base • • • • Square Wall Square Base and Square Wall Shaker Style Doors Solid Reverse Raised Beaded Panel Full Overlay Slab Drawer Front Lynton 3/4” optional drawer front profile 3/4” optional drawer front profile drawer front profile • Beaded center panel on 5-piece drawer fronts will not align with doors when used on cabinets with double doors and a full width drawer. DOOR STYLES Monterey Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 21/8” 16 door profile Square Base Square Wall • Square Base and Square or Arch Wall Doors • Veneer Raised Panel • Partial Overlay Montgomery Arch Wall • Profiled Slab Drawer Front • Reverse Bevel Profile, Decorative Hardware Not Required Availability DOOR STYLES 3/4” drawer front profile Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil ✓ ✓ ✓ ✓ — — ✓ — 11/2” 21/4” Optional Drawer Front: Slab (DFSLB) drawer front profile door profile Square Base 3/4” optional drawer front profile Square Wall • Square Base and Square Wall Shaker Style Doors • Veneer Flat Panel • Full Overlay Ridgefield • 5-Piece Drawer Front • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — ✓ — — — — 21/8” door profile Square Base Square Wall • Square Base and Square Wall Doors • Veneer Flat Panel • Partial Overlay 3/4” drawer front profile • Profiled Slab Drawer Front • Reverse Bevel Profile, Decorative Hardware Not Required Effective March 17, 2014 DOOR STYLES Rothshire NEW Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 21/2” 3” 3” 17 Square Wall • Square Base and Square Wall Miter Doors • Veneer Flat Panel • Full Overlay Selena drawer front profile 10″+ • 5-Piece Drawer Front Mitered to Match Door • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil ✓ ✓ — ✓ — — — — 21/2” 3” 3” Optional Drawer Front: Flat 5-Piece (DFF5PC) Square Base • • • • Square Wall Square Base and Square Wall Miter Doors Solid Raised Panel on Door and Large 5-Piece Drawer Fronts Full Overlay Solid Routed Drawer Front Shiloh optional drawer front profile 3/4” door profile drawer front profile • 5-piece 6 1/4″ and 6 3/4″ high drawer fronts have a flat center panel, 10″ and taller drawer fronts have a raised center panel. • Distressing Available • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil ✓ ✓ — ✓ — — ✓ — 21/8” Optional Drawer Front: Flat 5-Piece (DFF5PC) 3/4” drawer front profile Square Wall • Square Base and Square Wall Doors • Veneer Flat Panel • Full Overlay 21/8” NEW door profile Square Base optional drawer front profile 10″+ optional drawer front profile • Profiled Slab Drawer Front • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Effective March 17, 2014 DOOR STYLES Square Base drawer front profile door profile DOOR STYLES Sterling Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — ✓ — — — — 15/8” 21/8” 21/8” Optional Drawer Front: Raised 5-Piece (DFR5PC) 18 door profile Square Base Square Wall • Square Base and Square or Arch Wall Doors • Solid Raised Panel • Full Overlay Sullivan 1” drawer front profile Arch Wall optional drawer front profile (top and bottom) optional drawer front profile (sides and 10″+) • 1″ Raised Profile Drawer Front • Distressing Available • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — DOOR STYLES Availability Alder 11/2” 21/2” 21/2” Optional Drawer Front: Raised 5-Piece (DFR5PC) door profile Square Base Square Wall • Square Base and Square or Arch Wall Doors • Solid Raised Panel • Full Overlay Sumner Arch Wall 1” drawer front profile optional drawer front profile (top and bottom) optional drawer front profile (sides and 10″+) • 1″ Raised Profile Drawer Front • Distressing Available • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil ✓ ✓ — ✓ ✓ — ✓ — 21/4” 3” 3” Optional Drawer Front: Flat 5-Piece (DFF5PC) Square Base Square Wall • Square Base and Square Wall Doors • Solid Reverse Raised Panel on Door and Large Drawer Fronts • Full Overlay door profile 3/4” drawer front profile optional drawer front profile optional drawer front profile 10″+ • Slab Drawer Front • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. Effective March 17, 2014 DOOR STYLES Trystan Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — ✓ — ✓ — — — — 19 door profile Slab Wall • Veneer Slab Doors and Drawer Fronts • Veneer Face and Back • 3mm Wood Edging on All Edges Windham 3/4” drawer front profile • Furniture Board Core • Full Overlay • Grain direction is vertical on doors and horizontal on drawer fronts. Availability Alder Cherry Hickory Maple Oak PureStyle™ Rustic Alder Thermofoil — — — ✓ — — — — DOOR STYLES Slab Base 21/8” door profile Square Base Square Wall • Square Base and Square or Arch Wall Doors • Solid Raised Panel • Partial Overlay Arch Wall 1” drawer front profile • 1″ Raised Profile Drawer Front • Distressing Available • Reverse Bevel Profile, Decorative Hardware Not Required Effective March 17, 2014 PREMIUM COLOR PALETTE Wood Tone Glazes OPTION NAME Inspired Collection* FINISH Opaque Glazes* Opaques* 20 DESCRIPTION/LIMITATIONS Black Forest A two tone finish. A medium toned finish that is highlighted with a dark glaze. Coffee A two tone finish. Dark glaze over a warmer toner that emulates a soft, old-world look and enhances the door profiles. Palomino A two tone finish. A light toned finish that is highlighted with a dark espresso glaze. The glaze is meant to be seen primarily in the profiled areas and has minimal affect to the overall color. Whiskey A warm finish with a rich dark patina to create a true reproduction of a period style antique. Black Cloud A cool grey opaque finish available on Maple styles. Coconut A warm white opaque finish available on Maple styles. Dover A clean and inviting opaque white color with the slightest hint of a grey undertone. Pearl A subtle creamy white color painted on any Maple cabinet style. Amaretto When glaze is applied, the opaque (Cloud, Coconut, Dover, or Pearl) is highlighted with a dark brown glaze. Créme Grey Stone When glaze is applied, the opaque (Cloud, Coconut, Dover, or Pearl) is highlighted with a grey glaze. Toasted When glaze is applied, the opaque (Cloud, Coconut, Dover, or Pearl) is highlighted with a medium brown glaze. Almond Black In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. Honeysuckle The pale warmth of this finish creates an inviting glow with a subtle, creamy yellow color painted on Maple. This color is a full hiding opaque finish. In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. Juniper Berry This finish creates a pale antique blue color painted on Maple. This color is a full hiding opaque finish. In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. Oasis A two toned finish, applying a turquoise blue opaque finish enhanced with a coffee colored glaze. The glaze accents the profiles and accentuates the overall color of the door. In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. Portobello A two tone finish, applying a neutral beige colored opaque finish enhanced with a darker yet monochromatic glaze for a true shadowing effect. The glaze accents the profiles and accentuates the overall color of the door to emphasize the highs and lows. In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. Sand Dune This finish creates a natural beige color painted on Maple. This color is a full hiding opaque finish. In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. Storm A semi translucent stone grey finish that allows the natural tones and characteristics of the wood to show through. In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. Tidal Mist A two tone finish, applying a pale antique blue opaque finish enhanced with a light brown glaze to create a shadowing effect. The glaze accents the profiles and accentuates the overall color of the door to emphasize the highs and lows. In Distinction construction, cabinet will have Natural Maple laminate ends. If cabinet ends are exposed, a finished plywood end option or finished end skin needs to be ordered. White A subtle white color painted on selected Maple styles. White laminate interior standard. Finish agreement required, see page 420. DISTRESSING AVAILABILITY HEIRLOOM AVAILABILITY ✓ ✓ N/A N/A ✓ N/A ✓ N/A ✓ N/A N/A N/A ✓ N/A N/A N/A N/A N/A ✓ ✓ N/A N/A ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ N/A N/A *On wood products, normal movement is typical due to change in climatic conditions. This will cause hairline cracks at stile, rail and panel joints. This hairline cracking is a normal characteristic of opaque or painted finishes and will not be considered a reason for product replacement. Effective March 17, 2014 UNFINISHED Standard Finish OPTION NAME Unfinished DESCRIPTION/LIMITATIONS Must upgrade to PE or APC. When cabinets are finished by an outside source, finish is not covered under warranty. Interiors of cabinets will be Natural Maple laminate. For finishable interiors, MIP must be specified. DISTRESSING AVAILABILITY HEIRLOOM AVAILABILITY ✓ N/A 21 FINISH TECHNIQUES Techniques Distressing Heirloom DESCRIPTION Provides a rustic look through the carefully crafted application of distressing characteristics such as dents, wormholes, chisel marks, and other signs of wear on solid wood doors, drawer fronts, face frames, and selected trim items (veneer parts will not be distressed). The distressing technique creates a finish with unique and appealing imperfections, similar to those of time-worn antiques. Distressing characteristics are more visible with glaze finishes (face frames and trim items without detailed profiles will not feature glaze hang-up on distressed areas). Not available to order with Coconut, Dover, Pearl, and White. Available on select finishes. The finish will be sanded through the base coat to expose the surface of the wood. This type of sand through on the edges and profiles creates a naturally worn appearance. If a finish is chosen with a glaze, the glaze will be applied after the sanding has been done. This will enhance those areas of exposed wood to take on the darker characteristic of the applied glaze. Select trim pieces will feature Heirloom characteristics. See Trim section for availability. FINISH OPTION NAME Effective March 17, 2014 FINISH AVAILABILITY Opaque Glazes Inspired Collection Distressing Technique FINISH Opaques Wood Tone Glazes Standard Finishes 22 Brierwood Cattail Chocolate Cider Cranberry Havana Light Natural Sahara Sangria Tundra Wheat Unfinished Black Forest Coffee Palomino Whiskey Black Cloud Coconut Dover Pearl Cloud w/Amaretto Créme Cloud w/Grey Stone Cloud w/Toasted Almond Coconut w/Amaretto Créme Coconut w/Grey Stone Coconut w/Toasted Almond Dover w/Amaretto Créme Dover w/Grey Stone Dover w/Toasted Almond Pearl w/Amaretto Créme Pearl w/Grey Stone Pearl w/Toasted Almond Black+ Honeysuckle+ Juniper Berry+ Oasis+ Portobello+ Sand Dune+ Storm+ Tidal Mist+ White Distressing ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ OAK DOOR STYLES Anden Bailey Breman Caldera NEW Crandall Cullen NEW Hanlon NEW LaGrange Laureldale Leeton NEW Liberty Monterey Montgomery Ridgefield Rothshire NEW Selena Shiloh Sterling Sullivan Sumner Trystan Windham Aurora Breman Brighton Brittany Covington Crandall Sumner Heirlooming** MAPLE DOOR STYLES ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓†Distressing not available on Coconut, Dover, Pearl and White. + In Distinction construction, cabinets will have Natural Maple laminate ends. Signed finish agreement required, see page 420. **Heirlooming not available on Trystan in Black. Effective March 17, 2014 FINISH AVAILABILITY Sumner Shiloh Montgomery Carson Breman Bradshawe Sumner RUSTIC ALDER DOOR STYLES Shiloh Selena Carson Breman Bradshawe Trystan Sumner Sullivan Shiloh Selena NEW Rothshire Montgomery Monterey Liberty Laureldale LaGrange NEW Hanlon NEW Cullen Crandall NEW Caldera Breman Bayport Bailey Brierwood ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Cattail ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Chocolate ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Cider ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Cinnamon ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Cranberry ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Havana ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Light+ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Natural ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Sahara ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Sangria ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Tundra ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Wheat ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ + ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Wood Tone Glazes ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Black Forest ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Coffee ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Palomino ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Whiskey Black ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Distressing Technique Unfinished Distressing + 23 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Cherry Light and Cherry Natural laminate sides are intentionally 15-20% darker than face frames and doors at the time of manufacture to compensate for the expected darkening of face frames, doors, etc., as they are exposed to natural sunlight. Effective March 17, 2014 FINISH Standard Finishes Montgomery ALDER DOOR STYLES CHERRY DOOR STYLES 2014 .FINISH AVAILABILITY Addison Catalina ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Benson Montgomery ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Cartright Coconut w/Amaretto Crème Cashmere White Distressing Lynton Standard Finishes Brierwood Cattail Havana Light Natural Sahara Tundra Unfinished Coffee THERMOFOIL DOOR STYLES ✓ ✓ ✓ ✓ ✓ ✓ ✓ FINISH Distressing Laminate Wood Tone Technique Finishes Glazes 24 Buchanon PURESTYLE™ DOOR STYLES HICKORY DOOR STYLES Effective March 17. These are a skin and a door that can be attached to finish the exposed end. BED. See page 32 for details. 7. 10. as follows: 1.THINGS TO REMEMBER ABOUT FINISHED ENDS AND CABINET INTERIOR FINISHES 25 SPECIFICATIONS On cabinets with PLYWOOD ENDS (PE) or ALL PLYWOOD CONSTRUCTION (APC) modifications. This will extend the cabinet run by the thickness of the panel or storage shelf. Both ends of the cabinet use 1/2″ plywood veneer panel that is factory finished on the exterior to match the door and frame. 5. 2014 . Order FURNITURE PLYWOOD ENDS BOTH (FPEB). Effective March 17. You can finish the exposed ends in your kitchen with one of several decorative options. cabinet sides are plywood with an unfinished veneer exterior. Purchase a Wall MESSAGE CENTER. BOD . TED).Base Open Cabinets Base Microwave Cabinets 9. All Wall Organizer and Wall/Base Spice Drawer Cabinets are frameless doweled construction and feature 3/4″ furniture board with matching finished veneer interior and exterior. Leave the ends UNFINISHED if the cabinets are installed against each other or against the wall. Order cabinets with FINISHED ENDS (FB). factory installed. Base or Tall END DECORATIVE DOOR PANELS (WED. Purchase Wall. 3. All Bookcase Cabinets feature 1/2″ plywood end panels with matching veneer exteriors and interiors. 4. 6. The following cabinets are provided with standard MIP construction (matching veneer interior and exterior): Wine Rack Cabinets Wall China Display Cabinets WOC . BOC. This brings the cabinet side flush with the face frame. 2.Wall Open Cabinets Microwave Cabinets CPU Base Cabinet Bookcase Cabinets Microwave Tambour Cabinets BOB. Order AUTHENTIC ENDS (AUTHL or AUTHR) or Face Frame and Door on End (FFDL or FFDR). See page 32 for details. 8. Purchase a 1/4″ VENEER SKIN for field installation. This will extend the total cabinet run by the thickness of the door. MDF provides a smoother finish when painted. 2014 . Optional: EasyTrax™ (ET) height adjustment system. an Opaque finish. 6-way adjustable and self closing. Includes PE upgrade and standard laminate interior. stained. integrated cup hinge with self-closing feature. Face Frames 3/4″ solid hardwood.CONSTRUCTION FEATURES DISTINCTION (DST) 26 PLYWOOD ENDS (PE) ALL PLYWOOD CONSTRUCTION (APC) Doors & Drawer Fronts See ‘‘Door Styles’’ pages 5-19 for door and drawer front configuration and construction details. Drawer bottom is 5. Drawer bottom is 5. Corners are dovetailed and glued. Optional Furniture Finished Plywood Ends (FPEB) modification: Cabinets will have 3/4″ finished veneer end panels to achieve a Furniture End appearance. 3/4″ plywood laminated to match interiors. Cabinet Tops & Bottoms 1/2″ furniture board with Natural Maple or White laminate interior and exterior surfaces. Hinge features deactivation option. *3/4″ prior to final processing. CONSTRUCTION FEATURES Cherry Light and Cherry Natural laminate sides are intentionally 15 . Shelves are fully adjustable in wall and base cabinets. Not available on cabinets with frameless construction. etc.2mm laminated plywood. Not available with extended stiles. end panels and back panels. 3/8″ plywood with Natural Maple or White laminate interior. Cabinet Backs 3/8″ furniture board with Natural Maple or White laminate interior. as they are exposed to natural sunlight.20% darker than face frames and doors at the time of manufacture to compensate for the expected darkening of face frames. or an Opaque Glaze finish is ordered. I-Beam Braces 1/2″ furniture board dadoed into face frame. Actual final dimensions will vary. Hinges SmartStop™ fully concealed. Cabinet Sides 1/2″ furniture board with Natural Maple or White laminate interiors. Base cabinets have 3mm system holes for easy drawer and tray installation. Shelves 3/4″ furniture board with Natural Maple or White laminate to match interiors. 1/2″ unfinished veneer plywood with Natural Maple or White laminate interiors. Maple door center panel will be constructed of MDF material unless Heirlooming or Distressing technique is specified. Exteriors are laminate that match the color of the face frame.2mm laminated plywood fully captured in box sides. and contraction. 1/2″ plywood with Natural Maple or White laminate interior and exterior surfaces. doors. expansion. Base cabinets have 3mm system holes for easy drawer and tray installation. When an Inspired Collection Opaque (excludes Storm). front and back. fully captured in box sides. Effective March 17. Matching Interior Plywood (MIP) is available. front and back. end panels and back panels. and sealed before a catalyzed top coat is applied. Roll Trays All Styles: Four-sided 3/4″* clear coated hardwood. Drawer Box Construction All Styles: Four-sided 3/4″* clear coated hardwood. Corners are dovetailed and glued. with exception of The Inspired Collection which have Natural Maple laminate exteriors. See page 406 for details. Some cabinets utilize a 170° or 107° 4-way adjustable hinge. and is more resistant to warping. Finish Multi-step finishing process where the finished components are sanded. Shelves are fully adjustable in wall and base cabinets.. Plywood dadoed into face frame. and PY18/36 (swing-out and door mounted racks).Unfinished Furniture Board *3/4″ prior to final processing. SLS33/36 (fixed shelf). PE. Actual final dimensions will vary. see ACCESSORIES section. 2014 . self-aligning. Please see written warranty for detailed information.1/2” Furniture Board with Natural Maple or White Laminate Tops and Bottoms . & APC cabinets. toekick will be plywood. All guides have a maximum weight capacity of 75 lbs. The materials used in manufacturing are: solid wood. Drawers and roll trays have a maximum weight capacity of 15 lbs. Warranty Lifetime limited warranty.2 mm Plywood with Natural Maple Laminate. per square foot. When APC is selected. 3/4 extension guides that plug into 3mm system holes. 5 ply and 7 ply plywood are composed of layers of wood veneer.3/8” Furniture Board with Natural Maple or White Laminate Top View Exterior Sides . 3 ply. These components are found in BCFW48SP (swing-out shelf).5.3/4” Furniture Board with Natural Maple or White Laminate Interior Sides . roller bearing. Captured in Box on Four Sides Backs . self-aligning. Effective March 17. Optional: Dovetail Drawer Undermount (3/4X) – fully concealed.1/2” Furniture Board with Matching Laminate Drawer Guide Fully Concealed CONSTRUCTION FEATURES Shelves .CONSTRUCTION FEATURES DISTINCTION (DST) Drawer and Roll Tray Guide PLYWOOD ENDS (PE) ALL PLYWOOD CONSTRUCTION (APC) Double fully concealed. 27 A few interior components are manufactured from laminated furniture board because they provide for the most durable. Toekick Unfinished furniture board toekick to allow application of finished toeboard materials.3/4”* Clear Coated Hardwood with Dovetailed Corners Drawer Bottom . epoxy coated. cabinet box and shelving in our Distinction. full extension guide with Smart Stop™ self-closing mechanism and fast clip removal system. applying resistance to the self-closing mechanism. All Wood Construction All wood construction refers to the cabinet face frame. 3 ply plywood is composed of hardwood veneer surfaces laminated to a furniture board core. 5 ply.1/2” Furniture Board with Natural Maple or White Laminate Toekicks . Smart Stop engages when the drawer or roll tray is approximately 2″ from closing. and 7 ply plywood. A variety of laminate and wood toeboard skins and baseboard mouldings available in 8′ lengths. Drawer Box . aesthetic application. 2014 . † DFF5PC. Please contact customer service for more details. Effective March 17.MODIFICATION/ UPGRADE Construction PE Upgrades APC (page 29) 28 Drawer Front Upgrades (page 30) Drawer Options (page 31) End Panel Modifications (page 32) CUSTOM MODIFICATIONS Finish Modifications (page 33) Box Modifications (pages 34-35) PE APC DFF5PC/DFR5PC DFSLB/DFPSLB 3/4X SCPDRW AUTHL AUTHR FB FFDL FFDR FPEB MIP CBO CCO CFP CND ID RD EXB EXL EXR INVFRM TVRAV/FV/VV DRT ET FD RT TD ADDTK DRWTK FTK FTKAV/FTKFV RECTKALL RECTKBK RECTKL RECTKR TKP VTK CFNTO CFRMO P ALF CG MD MODIFICATION/UPGRADE COMPATIBILITY CHART ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DFF5PC/DFR5PC† DFSLB/DFPSLB† ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 3/4X SCPDRW ✓ ✓ ✓ ✓ AUTHL AUTHR FB FFDL FFDR FPEB* MIP CBO CCO CFP CND ID RD Face Frame EXB Modifications EXL (page 36) EXR INVFRM TVRAV/FV/VV Installed DRT Interior ET Modifications FD (pages 37-38) RT TD Toekick ADDTK Modifications DRWTK (pages 39-42) FTK FTKAV/FTKFV RECTKALL RECTKBK RECTKL RECTKR TKP VTK Configuration CFNTO Modifications CFRMO (page 43) P Specialty Doors ALF (pages 44-47) CG MD ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Orders for cabinets with non-compatible modifications will not be processed. See pages 5-19 for availability. ✓Represents compatible modification(s) and upgrade(s). and DFPSLB only available on selected door styles. DFSLB. use Attachments to specify PE for all other cabinets instead of selecting it for the entire kitchen. *When a cabinet is specified with FPEB in a design where PE has been selected for the entire kitchen (through Styles & Pricing Tab and Construction Options menu). DFR5PC. use attachments to specify PE for all other cabinets instead of selecting it for the entire kitchen. OPTION NAME APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Plywood Ends (PE) Most cabinets with sides Replaces standard cabinet ends with unfinished 1/2″ plywood ends.1/2” Plywood with Natural Maple or White Laminate Tops and Bottoms .3/8” Plywood with Natural Maple or White Laminate Top View Top View Shelves .1/2” Plywood with Veneer Toekicks . Most end panels Replaces standard panel material with plywood. Please check with your customer service representative before placing your order. and 3/8″ back. 29 *When a cabinet is specified with FPEB in a design where PE has been selected for the entire kitchen (through Styles & Pricing Tab and Construction Options menu).Unfinished Furniture Board Exterior Sides .1/2” Plywood with Veneer Toekicks . laminate on interior side. veneer finished on exterior side. bottom. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval.3/8” Furniture Board with Natural Maple or White Laminate ALL PLYWOOD CONSTRUCTION UPGRADE (APC) Backs .CONSTRUCTION UPGRADES See page 28 for modification compatibility.1/2” Furniture Board with Natural Maple or White Laminate Effective March 17. All Plywood Construction (APC) Most cabinets with sides Replaces standard cabinet construction with unfinished 1/2″ plywood ends.1/2” Plywood with Natural Maple or White Laminate Exterior Sides .3/4” Furniture Board with Natural Maple or White Laminate Interior Sides . PLYWOOD ENDS CONSTRUCTION UPGRADE (PE) Backs . 2014 .3/4” Plywood with Natural Maple or White Laminate Interior Sides . Upgrades shelves to 3/4″ laminated plywood. top.Unfinished Plywood CONSTRUCTION UPGRADES Tops and Bottoms .1/2” Plywood with Natural Maple or White Laminate Shelves . Leeton. Selena. Sullivan See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. and on a cabinet where applicable. and Montgomery DRAWER FRONT UPGRADES DRAWER FRONT FLAT 5-PIECE (DFF5PC) Bailey Selena* Benson Shiloh Breman Sumner DRAWER FRONT RAISED 5-PIECE (DFR5PC) Carson NEW Sullivan Sterling Liberty NEW *Selena 5-piece 6 1/4″ and 6 3/4″ high drawer fronts have a flat center panel. on Anden. tall. Must upgrade all drawer fronts on cabinet where applicable. and vanity cabinets Replaces the standard drawer front with a 5-piece drawer front (see images with applicable door styles). Shiloh. Drawer Front Raised (DFPSLB) Base. Must upgrade all drawer fronts on Carson. Caldera. tall. tall. OPTION NAME 30 APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Drawer Front Flat 5-Piece (DFF5PC) Base. Liberty. on a cabinet where applicable. tall. Cartright. Must upgrade all drawer fronts on cabinet where applicable. Please check with your customer service representative before placing your order.DRAWER FRONT UPGRADES See page 28 for modification compatibility. DRAWER FRONT RAISED (DFPSLB) DRAWER FRONT SLAB (DFSLB) Crandall Anden NEW Leeton NEW Caldera NEW Montgomery Cartright Effective March 17. Must upgrade all drawer fronts on Bailey. and See page 78 for 5-piece drawer front dimensions when specifying decorative hardware. 2014 . and vanity cabinets Replaces the standard drawer front with a 5-piece drawer front (see images with applicable door styles). and vanity cabinets Replaces standard drawer front with slab drawer front. Sumner Drawer Front Raised 5-Piece (DFR5PC) Base. Sterling. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. 10″ and taller drawer fronts have a raised center panel. on Crandall Drawer Front Slab (DFSLB) Base. and vanity cabinets Replaces standard drawer front with raised profile drawer front. Benson. Breman. Available Replaces top drawer box with a 2″ high drawer box to allow for clearance of cooktops.3/4”* Clear Coated Hardwood with Dovetailed Corners Drawer Bottom . Increases clearance for cooktops from 2″ to 3 3/8″. Captured in Box on Four Sides 31 SCOOPED DRAWER (SCPDRW/SCPDRWB/SCPDRWL/SCPDRWR) Drawer Guide Fully Concealed DRAWER OPTIONS *3/4″ prior to final processing. or B must be specified. Cartright. R. Please check with your customer service representative before placing your order. and On base cabinets with two top drawers. etc.DRAWER OPTIONS See page 28 for modification compatibility. Actual final dimensions will vary. Dovetail Drawer Undermount (3/4X) Cabinets with drawers Scooped Drawer (SCPDRW) (SCPDRWB) (SCPDRWL) (SCPDRWR) Most base cabinets. Benson. Only top drawer will be modified when on all door styles except specified on drawer bases. Buchanon.5. OPTION NAME APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Replaces standard Smart Stop Premium Drawer Guide with 3/4 extension undermount drawer guide.2 mm Plywood with Natural Maple Laminate. Effective March 17. Must apply to all drawers in a cabinet. 2014 . where applicable (not available on drawers with heavy duty drawer guides). L. DOVETAIL DRAWER UNDERMOUNT (3/4X) Drawer Box . Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. Drawer box does not change. For tall cabinets. Not available with extended stiles or on cabinets with frameless construction. Full depth shelves standard. Not available on peninsula cabinets. FFD side of cabinet will also be flush). office. Matching Interior Plywood (MIP) is available. 2014 . 15″. and 24″. Finished Ends (FB) Cabinets with PE or APC modification. AUTHENTIC ENDS (AUTHL/AUTHR) FURNITURE FINISHED PLYWOOD ENDS (FPEB) Backs .Unfinished Furniture Board FACE FRAME AND DOOR ON END (FFDL/FFDR) Wall cabinets Base cabinets Vanity cabinets Effective March 17. 9″ depth available on cabinets 30″ high or taller. 27″ deep cabinets will have double door configuration.e. Decorative door for wall and tall cabinets will match style chosen on order.3/4” Furniture Board with Natural Maple or White Laminate Interior Sides . Both sides are finished. Please check with your customer service representative before placing your order. tall.3/4” Plywood with Natural Maple or White Laminate Tops and Bottoms . and vanity cabinets Creates a working door on the end of the specified cabinet. and vanity cabinets DESCRIPTION/LIMITATIONS Modifies cabinet end panel(s) with applied decorative door(s) onto FPEB upgraded end panel(s). both ends will be finished Creates a matching finished 1/2″ veneer plywood exterior with laminate interior. Includes PE upgrade and standard laminate interior. base. On Base and Tall cabinets. Opposite end panel will be FPEB. 21″. Glass shelves not compatible with the FFD modification. 15″. 24″and 27″. tall. the FFD door will be Cut for Glass. 12″. Option not available on both ends of cabinet. Face Frame and Door on End (FFDL) (FFDR) Most wall. Furniture Finished Plywood Ends (FPEB) Most wall. 21″. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. Doors will always be hinged on the back of the cabinet.END PANEL MODIFICATIONS See page 28 for modification compatibility. tall. OPTION NAME APPLICABLE CABINET GROUP Authentic Ends (AUTHL) (AUTHR) Most wall. Includes FPEB modification—If AUTHL or AUTHR upgrades are specified. Custom doors must be specified for other depths not listed. base. 32 12″ and 15″ high wall cabinets will have double door configuration on 21″ and 24″ deep applications. 12″ deep cabinets specified with FFDL or FFDR and FTKAV or FTKFV will receive a standard flush toekick. cathedral or square. When ordered in conjunction with MD on 12″ deep cabinets.3/4” Plywood with Veneer Toekicks . and vanity cabinets Replaces standard cabinet ends with 3/4″ finished veneer end panels to achieve a Furniture End appearance. the FFD door will also be glass. Available on most cabinets with depths of 9″. recessed toe space is standard on the side specified with FFDR or FFDL (if any flush toekick modification is specified. 18″. 18″.1/2” Furniture Board with Natural Maple or White Laminate Wall cabinets Base and Vanity cabinets Exterior Sides . Available on cabinets in depths of 12″..3/8” Furniture Board with Natural Maple or White Laminate Top View Shelves . arch. Office base cabinets (29″ high) will have double door configuration when specified on 24″ deep cabinets. Side cabinet configuration will match front configuration. the opposite end panel is also FPEB. i. non-miter doors have two panels on the bottom door. base. END PANEL MODIFICATIONS If glass is specified. Please check with your customer service representative before placing your order.FINISH MODIFICATIONS See page 28 for modification compatibility. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. and 3/8″ back. Matching Interior Plywood (MIP) APPLICABLE CABINET GROUP Most cabinets DESCRIPTION/LIMITATIONS Finishes the interior and exterior of the cabinet. Interior wood accessories feature a natural finish and will not match cabinet exterior. bottom. 2014 . MATCHING INTERIOR PLYWOOD (MIP) Tall cabinets Wall cabinets FINISH MODIFICATIONS OPTION NAME Base and Vanity cabinets Effective March 17. Most end panels with fillers attached 33 Replaces standard panel material with veneer plywood finished on both sides. top. Shelves are upgraded to full depth 3/4″ veneered plywood. NEW Cabinet construction features 1/2″ plywood ends. Please check with your customer service representative before placing your order. WITH DRAWER (CND) FP Base and Vanity cabinets Base and Vanity cabinets Effective March 17. Drawer box and any interior components remain in cabinet. drawer fronts. base. drawer fronts. base. tall.BOX MODIFICATIONS See page 28 for modification compatibility. drawer boxes. and mini touch-up kits. tall. Cabinet with No Door. Complete drawer(s) with drawer front(s) and interior components remain in cabinet. OPTION NAME 34 APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Cabinet Box Only (CBO) Most wall. base. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. and vanity cabinets Removes doors. and any attached accessory item. Most wall. and vanity cabinets Removes doors. with Drawer (CND) Removes door(s). and vanity cabinets with door(s) and drawer(s) CABINET BOX ONLY (CBO) CABINET CASE ONLY (CCO) BOX MODIFICATIONS Cabinets less doors − Wall Cabinets less doors − Tall Cabinets less doors and drawer fronts − Base CABINET FALSE PANEL (CFP) Cabinet case only − Tall Cabinet case only − Base CABINET WITH NO DOOR. and vanity (CFP) cabinets with a top drawer Replaces top drawer with false panel. tall. interior components. Cabinet Case Only (CCO) Most wall. Cabinet False Panel Most wall. base. 2014 . Any specified shelving is included and is always full depth. and vanity cabinets with drawers or roll trays Reduces the depth in 1″ increments to a minimum depth of 12″. End panels and shelf kits Increases the depth of shelves in 1″ increments to a maximum depth of 30″. Wall top hinge cabinets can only be reduced to 9″ depth minimum. Any specified shelving is included and is always full depth. Increased depth wall cabinets should be either floor mounted or stacked to maintain stability. Most base. Increases the depth of end panels in 1″ increments to a maximum depth of 36″. Roll tray kits Reduces the depth in 1″ increments to fit a minimum cabinet depth of 12″.BOX MODIFICATIONS (cont’d) See page 28 for modification compatibility. tall. Cabinets specified with 3/4X can only be reduced to a minimum depth of 15″. Any specified shelving is included and is always full depth. the 24″ deep cabinet must be modified. When depth beyond 24″ is desired on tall cabinets. 2014 . drawer depth will not change. End panels Reduces the depth in 1″ increments to a minimum depth of 6″. Any specified shelving is included and is always full depth. tall. The dimension is specified as the distance from the front of the face frame to the back of the cabinet. and vanity cabinets without drawers or roll trays in 1″ increments to 27″. Any specified shelving is included and is always full depth. Please check with your customer service representative before placing your order. Any specified shelving is included and is always full depth. and vanity cabinets without drawers or roll trays Reduces the depth in 1″ increments to a minimum depth of 6″. Most base and tall cabinets with roll trays Reduces the depth in 1″ increments to a minimum depth of 12″. tall. tall. Wall peninsula cabinets may be increased in 1″ increments to 18″ maximum. Most base. REDUCED DEPTH (RD) BOX MODIFICATIONS INCREASED DEPTH (ID) 35 Wall cabinets Base cabinets Wall cabinets Base cabinets Effective March 17. When oven cabinets with drawers are increased. toekick will not be included. Most base. Most wall cabinets Reduces the depth in 1″ increments to a minimum depth of 6″. AEL/AER panels are only available in 3″ increments up to a maximum depth of 36″. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. OPTION NAME Increased Depth (ID) Reduced Depth (RD) APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Most wall and vanity cabinets Increases the depth of wall and vanity cabinets in 1″ increments to a maximum depth of 24″. The dimension is specified as the distance from the front of the face frame to the back of the cabinet. The dimension is specified as the distance from the front of the face frame to the back of the cabinet. Drawers and roll trays will be reduced in 3″ increments. If reduced depth to 8″ or less. Any specified shelving is included and is always full depth. NEW 31″-36″ depths available on plywood panels only. and vanity cabinets without drawers or roll trays Increases the depth of base. The dimension is specified as the distance from the front of the face frame to the back of the cabinet. Oven Cabinets Increases the depth of oven cabinets in 1″ increments to a maximum depth of 27″. and stacked wall cabinets Inverts face frame openings. To extend a single stile. To extend both stiles. Bookcases. not resized. both face frames will be modified. Inverted Frame (INVFRM) Standard base. Please check with your customer service representative before placing your order. 2014 . Openings are exchanged. top and bottom locations should be specified after the frame is inverted. EXTENDED STILE BOTH (EXB) EXTENDED STILE LEFT (EXL) EXTENDED STILE RIGHT (EXR) Cabinets with a face frame − Wall Cabinets with a face frame − Wall Cabinets with a face frame − Wall INVERTED FRAME (INVFRM) Wall cabinets VALANCE TOP RAIL. On stacked walls. OPTION NAME APPLICABLE CABINET GROUP Extended Stile (EXB) (EXL) (EXR) Most cabinets with a face frame DESCRIPTION/LIMITATIONS Creates a 3″ stile extended beyond its normal face frame width to create an overall face frame width of 4 1/2″. FACE FRAME MODIFICATIONS Valance Top Rail (TVRAV) (TVRFV) (TVRVV) Base Open Cabinets. when INVFRM is ordered in conjunction with CG (cut for glass).FACE FRAME MODIFICATIONS See page 28 for modification compatibility. specify EXB. FURNITURE (TVRFV) VALANCE TOP RAIL. Drawer openings relocated to the bottom of a base cabinet must always be a working drawer. right (EXR) or left (EXL) must be specified. ARCH (TVRAV) Base cabinets VALANCE TOP RAIL. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. or straight valance. STRAIGHT (TVRVV) Effective March 17. furniture. 36 When ordered with Peninsula (P) modification. Wall Open Cabinets Modifies the top rail with an arch. vanity base. OPTION NAME APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Deep Roll Tray (DRT) Most cabinets with roll trays Replaces standard roll trays with a 6 3/8″ high deep roll tray. Shelves will be replaced when Installed Roll Tray is specified. Replaces bottom roll tray only on base cabinets and bottom 2 roll trays on utility cabinets. Full Depth Shelf (FD) Base cabinets with standard half depth shelves Replaces standard shelf with full depth shelf. Please check with your customer service representative before placing your order.INSTALLED INTERIOR MODIFICATIONS See page 28 for modification compatibility. 2014 INSTALLED INTERIOR MODIFICATIONS DEEP ROLL TRAY (DRT) . RTL and RTR should be selected for roll trays in both sides. specify RTL for roll trays in left side and RTR for roll trays in right side. EasyTrax™ (ET) Most cabinets with roll trays Includes pre-installed upright wooden system that allows for easy height adjustment of roll trays. Tall cabinets INSTALLED ROLL TRAY (RT) Base cabinets Tall cabinets EASYTRAX™ (ET) Base cabinets FULL DEPTH SHELF (FD) Effective March 17. Installed Roll Tray (RT) Select base and tall cabinets Installs specified number of roll trays (1-5 per side). for two roll trays. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. Example. specify 2RT. 37 On cabinets with center stile. OPTION NAME Tray Dividers (TD) APPLICABLE CABINET GROUP Most wall. When cabinet is increased to 27″.INSTALLED INTERIOR MODIFICATIONS (cont’d) See page 28 for modification compatibility. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. Available only in the top of Stacked Walls and Tall Cabinets. Dividers match the interior of the cabinet. Not available with Peninsula modification. Please check with your customer service representative before placing your order. 38 Available with Reduced Depth modification (12″ minimum) and Increased Depth modification (27″ maximum). Cabinet Width # of Dividers Mod Name 9” 12” 15” 18” 21” 24” 27” 30” 33” 36” 1 1 2 2 3 3 4 4 5 5 1TD 1TD 2TD 2TD 3TD 3TD 4TD 4TD 5TD 5TD TRAY DIVIDERS (TD) Tall cabinets Wall cabinets Base cabinets Effective March 17. Rails for dividers are Natural Maple Plywood regardless of the color of the interior of the cabinet. 2014 . INSTALLED INTERIOR MODIFICATIONS Base Full Height cabinets will have a top. full height base. and tall cabinets DESCRIPTION/LIMITATIONS Installs removable Tray Dividers. tray dividers will be 24″ deep set back 3″ into the cabinet. See chart below. Number of dividers is predetermined based on cabinet width. Furniture drawers will be available with ADDTK option down to a reduced depth of 12″.FNT.P) Most base.P) Base cabinets Base cabinets Effective March 17. and wall cabinets with ADDTK Extends the face frame to the floor eliminating the toe space.FNT.FNT. When FTK.P) (FTK. See the Modification/Upgrade Compatibility Chart on page 28 for details. Not available when either RECTKL or RECTKR modifications are used. When FTK. Peninsula cabinets are available with ADDTK 15″ deep and larger.P is ordered with the Peninsula modification.P is ordered with the Peninsula modification. Depths of 14″ and less will not have ADDTK available. Please check with your customer service representative before placing your order.TOEKICK MODIFICATIONS See page 28 for modification compatibility. Flush Toekick (FTK) (FTK. however. ADDTK with reduced depth is available on cabinets 9″ deep or larger. All cabinets will feature square doors to match cabinets on order. both sides will receive a flush toekick. square doors will be sent. and vanity cabinets. OPTION NAME Add Toekick (ADDTK) APPLICABLE CABINET GROUP Most wall cabinets DESCRIPTION/LIMITATIONS Creates a 4 1/2″ toekick on the front of cabinet. only the working drawer side will receive a flush toekick. tall.P) FLUSH TOEKICK PENINSULA (FTK. only the peninsula side will receive a flush toekick. 20/20 layout will show arch doors. FLUSH TOEKICK (FTK) ADD TOEKICK (ADDTK) 33/8” Wall cabinets Tall cabinets Vanity cabinets FLUSH TOEKICK FRONT & PENINSULA (FTK. Not available on 93″ or 96″ tall cabinets due to separate pedestal base toekick. 2014 TOEKICK MODIFICATIONS Base cabinets . If arch door style is ordered. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. 39 Available with compatible toekick modifications. When FTK is ordered with the Peninsula modification. When FTKAV. 2014 . and vanity cabinets DESCRIPTION/LIMITATIONS Creates an arch flush toe space.P) APPLICABLE CABINET GROUP Most base. Not available on 93″ or 96″ tall cabinets due to separate pedestal base toekick. and vanity cabinets Creates a furniture flush toe space.P is ordered with the Peninsula modification. When FTKFV. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval.P is ordered with the Peninsula modification.P) (FTKAV. tall. OPTION NAME Flush Toekick Arch (FTKAV) (FTKAV. Please check with your customer service representative before placing your order.FNT. Valance replaces standard toekick creating a full open area beneath cabinet floor. When FTKFV. tall.FNT.FNT. Flush Toekick Furniture (FTKFV) (FTKFV. both sides will receive a furniture flush toekick. When FTKAV. Valance replaces standard toekick creating a full open area beneath cabinet floor.P is ordered with the Peninsula modification. FLUSH TOEKICK ARCH (FTKAV) FLUSH TOEKICK FURNITURE (FTKFV) TOEKICK MODIFICATIONS Base cabinets Tall cabinets Vanity cabinets Base cabinets Tall cabinets Vanity cabinets Effective March 17. both sides will receive an arch flush toekick. 40 Not available on 93″ or 96″ tall cabinets due to separate pedestal base toekick. only the peninsula side will receive an arch flush toekick.P) Most base. only the peninsula side will receive a furniture flush toekick.P is ordered with the Peninsula modification.P) (FTKFV.FNT.TOEKICK MODIFICATIONS (cont’d) See page 28 for modification compatibility. Please check with your customer service representative before placing your order. 87″. Recessed Toekick on Back or Side (RECTKBK) (RECTKL) (RECTKR) Most base and vanity cabinets Creates a 3 3/8″ recessed toekick on the back (RECTKBK). Not compatible with other toekick modifications. APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Loose Toekick (TKP) Most tall cabinets Recessed Island Toekick (RECTKALL) Most base and vanity cabinets Creates a 3 3/8″ recessed toekick on the right. On RECTKL and RECTKR. Available on 84″. Pedestal must be covered with toeboard material. or right (RECTKR). 2014 TOEKICK MODIFICATIONS OPTION NAME . the back will have a 1/2″ recessed offset and non-specified side will have a 1/2″ recessed offset to allow for application of toeboard material. left. or can be centered. Removes and ships the toekick separately. 93″ and 96″ tall cabinets have RECTKL or RECTKR standard on loose pedestal. Pedestal is designed to create a Recessed Left or Right Toekick (RECTKL or RECTKR) application during field installation. For recess toekick applications of both left and right. CABINET LEFT RECESSED TOEKICK (RECTKL) 33/8” 33/8” Base cabinets Vanity cabinets CABINET RIGHT RECESSED TOEKICK (RECTKR) 33/8” 33/8” 33/8” Base cabinets 41 33/8” Vanity cabinets Base cabinets Vanity cabinets Effective March 17. FTK is NOT available. left (RECTKL). and 90″ tall cabinets.TOEKICK MODIFICATIONS (cont’d) See page 28 for modification compatibility. RECESSED ISLAND TOEKICK (RECTKALL) LOOSE TOEKICK (TKP) 33/8” 33/8” 33/8” 33/8” 33/8” 33/8” Base cabinets Vanity cabinets CABINET BACK RECESSED TOEKICK (RECTKBK) Tall cabinets Pedestal is reduced in width for RECTKL or RECTKR during field installation. The entire toekick will have non-matching material and requires any exposed toekick area to be covered. The entire toekick area will have non-matching material and requires any exposed toekick area to be covered. When either the RECTKR or RECTKL are used. order RECTKL. and back of cabinet. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval.R. 87″. Toekick drawer includes zinc colored decorative pull for field installation. 21″.TOEKICK MODIFICATIONS (cont’d) See page 28 for modification compatibility. 30″. Please check with your customer service representative before placing your order. 27″. When ordered on 84″. Available on most 21″-24″ deep cabinets in 18″. Exterior dimensions of drawer are 3 3/8″ tall and 15″ or 18″ deep. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. and vanity cabinets Removes the toekick. 24″. pedestal will not be included. 33″. not just attached to the wall. Toekick drawer guide is full extension. tall. Failure to properly install cabinets in this situation will void the warranty. 2014 . OPTION NAME Toekick Drawer (DRWTK) 42 APPLICABLE CABINET GROUP DESCRIPTION/LIMITATIONS Most cabinets with a standard Replaces standard toekick with a toekick drawer. and 36″ toekick widths that have standard toekick construction. allow enough toeboard to cover front. does not include soft close feature. Front is unfinished. Void Toekick (VTK) Most base. cabinets must also be supported from the floor. Only available when the cabinet has a standard toekick (not available when flush toekick is standard or when cabinet has a separate pedestal base). TOEKICK MODIFICATIONS TOEKICK DRAWER (DRWTK) Tall cabinets Vanity cabinets Base cabinets VOID TOEKICK (VTK) Base cabinets Tall cabinets Vanity cabinets Effective March 17. or 90″ tall cabinets. When VTK is specified on cabinets to be used with a countertop. 1″ clearance below toekick drawer. Please check with your customer service representative before placing your order. OPTION NAME Cabinet Front Only (CFNTO) APPLICABLE CABINET GROUP Most cabinets with a face frame DESCRIPTION/LIMITATIONS Creates a door and/or drawer front assembled with a frame. doors. Base. 15 1/4″. Most wall and base cabinets 43 Peninsula cabinets are available with ADDTK 15″ deep and larger. Requests for non-published modifications may be treated as a Special Sales Order which will require feasibility and leadtime review and approval. Doors are attached with the specified hinges and drawer fronts are cleated. 2014 . No box. and 18 1/4″ deep wall peninsula cabinet or 24 1/4″ deep base peninsula cabinet. and pantry) or multi-drawer base cabinets.CONFIGURATION MODIFICATIONS See page 28 for modification compatibility. CABINET FRAME ONLY (CFRMO) Cabinet front only − Wall. utility. Peninsula (P) Creates a 12 1/4″. and Tall Cabinet frame only − Wall. and Tall CONFIGURATION MODIFICATIONS CABINET FRONT ONLY (CFNTO) PENINSULA (P) Base cabinets Wall cabinets Effective March 17. or drawer fronts are included. Not available on tall cabinets (oven. Cabinet Frame Only Most cabinets with a face (CFRMO) frame Creates a cabinet frame only. Depths of 14″ and less will not have ADDTK available. Cabinets with drawers or roll trays can only be reduced in 3″ increments. Base. . Cartright. 2014 .. See pages 363 and 364. 12″ – 15″ – Cabinet Height 18″ 21″ – – 30″ ✓ 36″ ✓ W15 ✓ ✓ – – ✓ ✓ W18 ✓ ✓ – – ✓ ✓ W21 – – – – ✓ ✓ WTH30 & WTH30..24 – – ✓ ✓ – – CUT FOR GLASS DOORS (CG) DOOR MODIFICATION/SPECIALTY DOORS Cathedral. Benson. Arch and Square .24 ✓ ✓ ✓ ✓ – – WVL30 & WVL30. Removal of glass will void warranty.. Custom door sizes available.ALUMINUM FRAME DOORS (ALF) with FROST GLASS ALF − AVAILABILITY PER DOOR 44 Cabinet Width W12 • • • • • All aluminum doors will be full overlay with miter construction. Cabinet will have standard interior or can be ordered with MIP option. and Catalina.24 ✓ ✓ ✓ ✓ – – WVL36 & WVL36. Buchanon. Effective March 17. Not available on bifold doors.BTM are specified on cabinets with upper and lower doors to designate which doors should be Cut for Glass.TOP and CG. and Finish when ordering Cut For Glass Doors. Cabinet face frame and end panels will be matched to the finish specified. CG. See Decorative Door Options grid for SKU availability. Specify Cathedral/Arch/Square. Door rails are 2 1/4″ wide. Glass clips included with door.Glass not included • • • • • • • Cut for Glass Cathedral Cut for Glass Arch Cut for Glass Shaker Styles Trystan. Door Style. Frost glass is installed in door. Liberty & Montgomery Cut for Glass Wide Rail Shaker Breman & Sumner Cut for Glass Square Not available in Addison. please see modification grids. For cabinet availability.24 – – ✓ ✓ – – WTH36 & WTH36. Includes Mullion Door and fully tempered clear glass for safety.BTM are specified on cabinets with upper and lower doors to designate which doors should be Mullion Doors. Custom Door Sizes not available. MD. Cabinet Width Cabinet Height 24″ 18″ (231 ∕ 2″) 30″ 33″ 36″ 39″ 42″ W15 G D D D A W18 G D D D A A W21 E E E B B W24 E E E B B W24 (butt) D D D A A W27 (butt) D D D A A D D D A A D D D A A D D D A A W42 E E E B B W45 E E E B B W48 (butt) D D D A A WC33 D D D A A WC39 D WC42 D WC45 D WC48 D DW30/DW30T D W30 (butt) G G W33 (butt) W36 (butt) DW33/DW33T DW36/DW36T DW39/DW39T DW42/DW42T G G Mullion Door Configurations A A B D E G 2 x 4 Lites 3 x 4 Lites 2 x 3 Lites 3 x 3 Lites 2 x 2 Lites D D A A Effective March 17. please see modification grids in wall section. textured glass will be listed with MDI modification. Any textured glass may be ordered to replace clear glass. See Decorative Door Options grid for SKU availability. On acknowledgment. Arch and Square .MULLION DOORS (MD) Cathedral. For Mullion Door availability.Tempered glass included 45 Mullion Cathedral • • • • • • • Mullion Arch Mullion Square Available in all door styles except Trystan.TOP and MD. 2014 DOOR MODIFICATION/SPECIALTY DOORS MULLION CATHEDRAL/ARCH/SQUARE LITES GRID . SHAKER MULLION DOORS (SHMD) Tempered glass included 46 • • • • • • Available in Breman. and Sumner. For Mullion Door availability. textured glass will be listed with SHMDI modification. Shiloh. Any textured glass may be ordered to replace clear glass. On acknowledgment. Liberty. MULLION SHAKER LITES GRID DOOR MODIFICATION/SPECIALTY DOORS Cabinet Width Cabinet Height 24″ 18″(231 ∕ 2″) 30″ 33″ 36″ 39″ 42″ W15† H H H H H H W18 H H H H H H W21 H H H H H W24 H H H H H W24 (butt) J J J J J W27 (butt) J J J J J H H H H W30 (butt)† H H H H H H H H H H H H H H H W42 H H H H H W45 H H H H H W33 (butt) W36 (butt) W48 (butt) J J J J J WC33 H H H H H WC39 J WC42 J WC45 J WC48 H DW30/DW30T H DW33/DW33T DW36/DW36T DW39/DW39T DW42/DW42T † Shaker Mullion Door Configurations H 3 x 3 Lites J 2 x 3 Lites H H H H Breman and Sumner will have ‘‘J Configuration’’ for 15″ and 30″ wide cabinets and all DW cabinets. Custom Door Sizes not available. Montgomery. Includes Mullion Door and fully tempered clear glass for safety. 2014 . Effective March 17. please see modification grids in wall section. Custom Door Sizes not available. For Mullion Door availability. Includes Mullion Door and fully tempered clear glass for safety. Liberty. On acknowledgment. Effective March 17. Shiloh. Montgomery.PRAIRIE MULLION DOORS (PRMD) Tempered glass included 47 • • • • • • Available in Breman. MULLION PRAIRIE LITES GRID Cabinet Height 24″ 18″(231 ∕ 2″) 30″ 33″ 36″ 39″ 42″ W15† K W18 K K K K K K K K K K W21 K K K K K W24 K K K K K W24 (butt) L L L L L W27 (butt) L L L L L K K K K K K K K K K K K K K K W42 K K K K K W45 K K K K K W30 (butt)† K K K K W33 (butt) W36 (butt) W48 (butt) L L L L L WC33 K K K K K WC39 L WC42 L WC45 L WC48 K DW30/DW30T K DW33/DW33T DW36/DW36T DW39/DW39T DW42/DW42T † K Prairie Mullion Door Configurations K 3 x 3 Lites DOOR MODIFICATION/SPECIALTY DOORS Cabinet Width L 2 x 3 Lites K K K K Breman and Sumner will have ‘‘L Configuration’’ for 15″ and 30″ wide cabinets and all DW cabinets. Any textured glass may be ordered to replace clear glass. textured glass will be listed with PRMDI modification. and Sumner. please see modification grids in wall section. 2014 . No changes or cancellations will be accepted after 24 hours from acknowledgment of order. and Catalina.ART GLASS PANELS GLASS INSERTS 48 • • • • • • Anson Avondale Cambridge Chalet Charlotte Edgemont Ellington Lanai Lonsdale Lyndhurst Maison Manor Meriden Pavillion Plantation Portico Quincy Usonian Villa Waterbury Wescott Wickford Art glass panels not available in Addison. See page 44. see page 404. Effective March 17. Art glass will be packaged separately from applicable cabinet(s) and shipped with cabinet order for field installation. For glass shelf kits. Cut for Glass door must be ordered separately. Buchanon. Door frame may reduce amount of glass shown. Cartright. Benson. 2014 . Effective March 17. Minimum Size 6” x 61/4” A A A Glass Types: A) Sparkolite B) Clear Baroque Br/Clr Widths 6” to 7” 1 Vertical Column Metal Types: 5/16” Colonial H-Ch Zinc Proglaze Tape (interior) 1/2” U-Ch Zinc (perimeter) Minimum Size 6” x 10” • Suggested to use with Square doors. Width÷6 B A A A A Glass Types: A) Clear Waterglass 100W B) Clear Sparkolite Glass Type: A) Clear Seedy 100SDY Metal Type: Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Black Patina Finish 3/16” H-Ch Zinc Proglaze2 (all) Black Patina Finish • Suggested to use with Square doors. 2014 GLASS INSERTS A Chalet .ART GLASS PANELS Anson Cambridge A A A A A B Minimum Size 6” x 6” A A B B A A A B Height÷6 A A Minimum Size 6” x 10” A 7/8” 13/8” A A A A A A B B A 49 B B 13/8” Sq. Avondale B A B A A A B A B A B Widths > 13” 4 Vertical Columns B B A A A B B 3” Widths > 10” to 13” 3 Vertical Columns B Widths > 18” 5 Verticals B Widths > 15” to 18” 4 Verticals Widths > 12” to 15” 3 Verticals Widths > 9” to 12” 2 Verticals Widths 6” to 9” 1 Vertical Widths > 7” to 10” 2 Vertical Columns 3” 3” A A A 6” A Heights > 13” Full Design Glass Types: A) 3/16” Clear with 1/2” Bevel B) Clear Vecchio 100V Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Heights < 13” Diamond(s) Only • Suggested to use with Square doors. 0368” 2. • Suggested to use with Square doors.ART GLASS PANELS Charlotte Ellington B B B A A B A B A 50 Heights 6” to 14” 1 Horizontal Bar A B B B A A B Overlay x 15/16” A B B Minimum Size 10” x 6” B A A B B A B Glass Types: A) 1/8” Clear B) Frost Etch 100 Glass Types: A) 1/8” Clear B) Frost Etch 100 Metal Types: 3/16” H-Ch Zinc Proglaze2 (all) 1/8” U-Ch Zinc (overlays) Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) • Suggested to use with Square doors. Effective March 17.5132” A A B A A B A A B A A Glass Types: A) 1/8” Clear B) 3/16” Clear with 1/2” Bevel C) Clear Artique 100A Widths >9” to 11” 2 Diamonds Metal Types: 5/16” Colonial H-Ch Zinc Proglaze2 (interior) 1/2” U-Ch Zinc Proglaze2 (perimeter) Widths 6” to 9” 1 Diamond A A A A A A A Glass Type: A) 1/8” Clear Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Minimum Size 6” x 10” • Suggested to use with Square doors.2107” A Widths >173/4” Widths >15” to 173/4” Widths >11” to 15” 5 Diamonds 4 Diamonds 3 Diamonds C A A A A Widths >16” 4 Vertical Columns Widths >11” to 16” 3 Vertical Columns Widths 6” to 11” 2 Vertical Columns GLASS INSERTS 3. 2014 . Edgemont A A B A A B A A Heights 6” to 12” 1 Center Diamond A Heights >23” 3 Horizontal Bars 15/16” Heights >12” Full Design B B B Minimum Size 6” x 6” 1 Center Diamond A B Heights >14” to 23” 2 Horizontal Bars A A B Lanai B Equal A A A A A A A A 3. 6351” B B B Glass Types: A) Clear Artique 100A B) 1/8” Frost Etch 100 2.3247” B A 31/8” 31/8” A 55/16” A A A A Widths >11” 3 Vertical Bars Equally Spaced A A A A Glass Type: A) Clear Rough Rolled 100RR Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Black Patina Finish Minimum Size 6” x 12” A 1.ART GLASS PANELS Lonsdale Maison 31/4” A A Equal A Equal Heights >9” Two Stars Equal A A B B A B B 31/4” A B A B B A B Heights 6” to 9” One Star Minimum Size 6” x 6” A A A A 51 A A Equal A B A A A B B A B B A B Widths >11” 4 Vertical Columns B A B Widths >9” to 11” 3 Vertical Columns Widths 6” to 9” 2 Vertical Columns Equal A 5” Glass Types: A) 1/8” Clear Artique 100A B) 1/8” Clear Granite 100G Glass Type: A) Seedy Clear 100Sdy Metal Type: 3/16” H-Ch Round Zinc Proglaze2 (all) Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) • Suggested to use with Square doors.1007” Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Minimum Size 6” x 10” • Suggested to use with Square doors. Lyndhurst A Manor 31/8” A A A A B 71/2” 1013/16” B B 5. 2014 GLASS INSERTS A B . Effective March 17.6811” Widths >11” 5 Vertical Columns Equal Widths 6” to 11” 1 Vertical Bar Centered B A A 55/16” Widths 6” to 11” 3 Vertical Columns Equal B 0. 1 .B1 Bevels A B2 A A A A 4” Heights >20” to 26” 3 .B1 Bevels A A A A A Heights >26” 2 . C Widths >11” to 15” 3 Diamonds C Glass Types: A) 1/8” Clear B) 1/8” Clear Artique 100A C) 1/8” Clear Granite 100G Metal Type: 3/16” H-Ch Round Zinc Proglaze2 (all) Y Door Frame Width Y = Width x 0.ART GLASS PANELS Meriden A A Plantation A A B1 A 52 A A A A A A Heights >15” to 20” 2 . Effective March 17. 2014 .B2 Bevel A Heights 6” to 15” 1 .B1.B1 Bevel B1 A A A Widths >15” 4 Diamonds A 1” Glass Types: A) 1/8” Clear B) 3/16” Clear with 1“ Bevel 51/2” B 31/2” B1 51/2” Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Minimum Size 8” x 6” B2 B 10” C B B B C B B C B B B 2” Glass Types: A) Clear Artique 100A B) Clear Sparkolite C) 3/16” Clear with 1/2” Bevel Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Black Patina Finish Minimum Size 6” x 10” Pavillion Widths 6” to 8” 1 Diamond Portico 7/8” A C B C Y Y Y Y A 7/8” A Y C Y A A B GLASS INSERTS A B A B C B B A A C A A A A C Widths >8” to 11” 2 Diamonds 2” • Suggested to use with Square doors.185 A A Glass Types: A) 1/8” Clear B) 3/16” Clear with 1/2” Bevel Widths >11” 2 Columns 2 Stars Widths 6” to 11” 1 Column 1 Star 41/4” 41/4” Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Black Patina Finish Minimum Size 6” x 12” • Suggested to use with Square doors. Usonian Waterbury 21/4” B A A A B A B B B B B A A B A A A 1” A A A A B A A A A A A A A A A B A A A Center Square Shape is Determined upon Height and Width of Unit 23/4” Heights >14” to 20” 2 Center Squares 17 Lite Configuration A Heights 6” to 14” 1 Center Square 12 Lite Configuration A A A A A A A A B A A A A BA B A A Glass Types: A) 1/8” Clear B) Thin Reeded (1/8” Reeds) Widths >11” 6 Perimeter Triangles Metal Type: 3/16” H-Ch Copper Proglaze2 (all) Minimum Size 6” x 12” Widths 11” to 6” No Perimeter Triangles A A A A A Heights >20” 3 Center Squares 22 Lite Full Design A Glass Type: A) Clear Waterglass 100W Minimum Size 6” x 6” Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Black Patina Finish • Suggested to use with Square doors. 2014 GLASS INSERTS Day Light Opening A . Effective March 17. Minimum Size 6” x 10” • Suggested to use with Square doors.9452” A A A A B B B B A B C C A A A A Equal A C Widths 6” to 8” 1 Vertical Column A A A A A Widths >11” 4 Vertical Columns Widths >8” to 11” Widths 6” to 8” 3 Vertical Columns 2 Vertical Columns 53 A C A 2” 1” 2” 1” A A 1” B B B B A A A A 1” Glass Types: A) 1/8” Clear B) 3/16” Clear Faceted Jewel Glass Types: A) Clear Waterglass 100W B) 3/16” Clear with 1/2” Bevel C) Clear Faceted Jewel Minimum Size 6” x 10” Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) • Suggested to use with Square doors.ART GLASS PANELS Quincy A Villa A A A B C A B A Widths >8” 3 Vertical Columns A B A 2. 2014 . Wickford A B B A B B 2.7775” A B A B A GLASS INSERTS Widths >9” 2 Vertical Columns B A B B A Widths 61/2” to 9” 1 Vertical Column Centered B B A Minimum Size 61/2” x 10” Glass Types: A) Clear Artique 100A B) Clear Granite 100G Metal Type: 3/16” H-Ch Round Zinc Proglaze2 (all) • Suggested to use with Square doors. Effective March 17.ART GLASS PANELS Wescott Heights 6” to 13” No Horizontal Bars Heights >13” to 23” 1 Horizontal Bar 54 Minimum Size 6” x 6” Heights >23” to 29” 2 Horizontal Bars Heights >29” 3 Horizontal Bars Glass Type: A) Clear Artique 100A Metal Type: 3/16” H-Ch Zinc Proglaze2 (all) Black Patina Finish Widths >14” 2 Vertical Bars Widths >8” to 14” Widths 6” to 8” 1 Vertical Bar No Vertical Bars • Suggested to use with Square doors.736” A B 0. Caldera.6″ x 12″ Minimum ACS36/ACS39 ✓ ✓ ✓ ✓ ACS42 ✓ ✓ ✓ ✓ B1240FH ✓ ✓ ✓ B12FH ✓ ✓ ✓ 8″ x 6″ Minimum 7 1/2″ x 7 1/2″ Minimum 6 1/2″ x 10″ Minimum ✓ ✓ ✓ ♦ ❖ ✓ ✓ ♦ ♦ ✓ ✓ ♦ ♦ ✓ B12** ✓ ✓ ✓ ✓ ♦ ♦ ✓ B1540FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B15** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B15FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B1840FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B18** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B18FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B2140FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B21 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ B24 ✓ ✓ ✓ ✓ ♦ ❖ ✓ B24** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ B2440FH** ✓ ✓ ✓ ✓ ♦ ❖ ✓ B2440FH** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ B24FH** ✓ ✓ ✓ ✓ ♦ ❖ ✓ B24FH** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ B27** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B2740FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B27FH ✓ ✓ ✓ ✓ ✓ ✓ ✓ B27FHRT ✓ ✓ ✓ ✓ ✓ ✓ ✓ B30** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B3040FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B30FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B33 ✓ ✓ ✓ ✓ ✓ ✓ ✓ B3340FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B33FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B36** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B3640FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B36FH** ✓ ✓ ✓ ✓ ✓ ✓ ✓ B39 ✓ ✓ ✓ ✓ ✓ ✓ ✓ B3940FH ✓ ✓ ✓ ✓ ✓ ✓ ✓ B39FH ✓ ✓ ✓ ✓ ✓ ✓ ✓ B42 ✓ ✓ ✓ ✓ ✓ ✓ ✓ B4240FH ✓ ✓ ✓ ✓ ✓ ✓ ✓ B42FH ✓ ✓ ✓ ✓ ✓ ✓ ✓ B4540FH ✓ ✓ ✓ ✓ ✓ ✓ ✓ B45FH ✓ ✓ ✓ ✓ ✓ ✓ ✓ B45FHRT ✓ ✓ ✓ ✓ ✓ ✓ ✓ B45RT ✓ ✓ ✓ ✓ ✓ ✓ ✓ B48 ✓ ✓ ✓ ✓ ♦ ❖ ✓ B48CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ B4840FH ✓ ✓ ✓ ✓ ♦ ❖ ✓ B4840FHCS ✓ ✓ ✓ ✓ ✓ ✓ ✓ B48FH ✓ ✓ ✓ ✓ ♦ ❖ ✓ B48FHCS ✓ ✓ ✓ ✓ ✓ ✓ ✓ BC36 L or R ♦ ♦ ♦ ♦ BC39 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ BC42 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ BC45** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ BC48** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ BCC** ✓ ✓ ✓ ✓ ✓ ✓ ✓ BCFW36 L or R ♦ ♦ ♦ ♦ BCFW39 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ BCFW42 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ BCFW45/48** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ BCP24 ✓ ✓ ✓ ✓ ♦ ❖ ✓ BCP24 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ BCP24FH ✓ ✓ ✓ ✓ ♦ ❖ ✓ BCP24FH L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ BEC24 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ◆ Available in FO door styles only except Breman. LaGrange. Laureldale. and Sumner ❖ Not available on Breman. Selena. Rothshire. Caldera. LaGrange. Selena. Rothshire. Laureldale. 2014 55 GLASS INSERTS Lyndhurst Maison Portico Usonian 6″ x 10″ Minimum Wickford Cambridge Chalet Charlotte Edgemont Lanai Manor Plantation Quincy Villa 6″ x 6 1/4″ Minimum Location Pavillion Avondale 6″ x 6″ Minimum Model Meriden Anson Ellington Lonsdale Waterbury Wescott ART GLASS PANELS . and Sumner ♦ ♦ Effective March 17. Selena. Laureldale. Selena. LaGrange. and Sumner ❖ Not available on Breman. Rothshire. Laureldale. Caldera. 2014 . 42 ✓ ✓ ✓ ✓ ✓ ✓ ✓ CNTYSB48 ✓ ✓ ✓ ✓ ♦ ❖ ✓ CNTYSB48CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ DAB36** ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW12** ✓ ✓ ✓ ♦ DW15** ✓ ✓ ♦ ✓ ✓ ♦ DW18** ✓ ✓ ✓ ✓ ✓ ✓ ✓ Model 56 Location ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW302424D** Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW302424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW24** DW30** DW302424P** Peninsula (2 doors) ✓ ✓ ✓ ✓ ♦ ❖ ✓ DW302424P** Front ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW332424D** Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW332424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW33** DW332424P** Peninsula (2 doors) ✓ ✓ ✓ ✓ ♦ ❖ ✓ DW332424P** Front ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW362424D** Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW362424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW36** DW362424P** Peninsula (2 doors) ✓ ✓ ✓ ✓ ♦ ❖ ✓ DW362424P** Front ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW392424D** Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW392424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW392424** DW392424P** Peninsula (2 doors) ✓ ✓ ✓ ✓ ♦ ❖ ✓ DW392424P** Front ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW422424D** Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW422424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ GLASS INSERTS DW422424** DW422424PL** Peninsula (2 doors) ✓ ✓ ✓ ✓ ♦ ❖ ✓ DW422424PL** Front ✓ ✓ ✓ ✓ ✓ ✓ ✓ FIC24 ✓ ✓ ✓ ✓ ♦ ❖ ✓ FIC30/36 ✓ ✓ ✓ ✓ ✓ ✓ ✓ MW**36 ✓ ✓ ♦ ✓ ✓ ♦ ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB21 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB24** ✓ ✓ ✓ ✓ ♦ ❖ ✓ SB24** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB24R ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB27** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB30** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB303427CC** ✓ ✓ ✓ ✓ ♦ ❖ ✓ SB33** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB36** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB39** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB42** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB45** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB453427** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB453427CC** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB48** ✓ ✓ ✓ ✓ ♦ ❖ ✓ SB48CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB483427CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB483427CC** ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB48DCS ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ PY** STDW48** L or R Top Door Only Top/Bottom ◆ Available in FO door styles only except Breman. Rothshire. LaGrange. and Sumner Effective March 17.BMW2448** ✓ ✓ ✓ BMW2448** L or R ✓ ✓ ✓ BMW2748** ✓ ✓ BMW3048** ✓ ✓ BTC12** ✓ CD** Wickford 6″ x 10″ Minimum Pavillion Cambridge Chalet Charlotte Edgemont Lanai Manor Plantation Quincy Villa 6″ x 6 1/4″ Minimum Meriden Avondale 6″ x 6″ Minimum Lyndhurst Maison Portico Usonian Anson Ellington Lonsdale Waterbury Wescott ART GLASS PANELS 6″ x 12″ Minimum 8″ x 6″ Minimum 7 1/2″ x 7 1/2″ Minimum 6 1/2″ x 10″ Minimum ✓ ♦ ❖ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ CNTYSB30. 33. Caldera. 39. 36. LaGrange. and Sumner Effective March 17.Avondale Cambridge Chalet Charlotte Edgemont Lanai Manor Plantation Quincy Villa Lyndhurst Maison Portico Usonian Meriden Pavillion Wickford Model Location 6″ x 6″ Minimum 6″ x 6 1/4″ Minimum 6″ x 10″ Minimum 6″ x 12″ Minimum 8″ x 6″ Minimum 7 1/2″ x 7 1/2″ Minimum 6 1/2″ x 10″ Minimum STDW51** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STDW54** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STDW57** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STDW60** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW12** L or R Top/Bottom ✓ ✓ ✓ ✓ ♦ ♦ ✓ STW15** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW18** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW21** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW24** Top/Bottom ✓ ✓ ✓ ✓ ♦ ❖ ✓ STW24** L or R Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW27** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW30** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW33** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW36** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW39** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW42** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW45** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW48** Top/Bottom ✓ ✓ ✓ ✓ ♦ ❖ ✓ STW48**CS Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STW4851 Top/Bottom ✓ ✓ ✓ ✓ ♦ ❖ ✓ STWEC12** Top ✓ ✓ ✓ ✓ ✓ ✓ STWEC12** Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ STWTC12** Top/Bottom ✓ ✓ ✓ ✓ ✓ ✓ ✓ TD12** L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ TD15** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ TPP12** L or R Top Door Only ✓ ✓ ✓ ✓ ♦ ♦ ✓ TPP15** L or R Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ TPP18** L or R Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U12** L or R Top Door Only ✓ ✓ ✓ ✓ ♦ ♦ ✓ U15** L or R Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U18** L or R Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U21** L or R Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U24** L or R Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U24** Top Door Only ✓ ✓ ✓ ✓ ♦ ❖ ✓ U27** Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U30** Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U33** Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ U36** Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ UOC24** Top Door Only ✓ ✓ ✓ ✓ ♦ ❖ ✓ US21** Top Door Only ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1212 L or R ✓ ✓ W1215 L or R ✓ ✓ ♦ ♦ ♦ ♦ W1218 L or R ✓ ✓ ✓ ♦ ♦ ✓ ✓ ✓ W1221 L or R ✓ ✓ ✓ ✓ ♦ ♦ W1224 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ W1227 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ W1230 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ W1233 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ W1236 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ W1239 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ W1242 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ W1512 L or R ✓ ✓ ✓ ♦ W1515 L or R ✓ ✓ ♦ ✓ ✓ ♦ W1518 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1521 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1524 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1527 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1530 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1533 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1536 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1539 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1542 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1812 L or R ✓ ✓ ✓ ♦ ◆ Available in FO door styles only except Breman. Caldera. Laureldale. Selena. LaGrange. Laureldale. Rothshire. 2014 57 GLASS INSERTS Anson Ellington Lonsdale Waterbury Wescott ART GLASS PANELS . Selena. Caldera. Rothshire. and Sumner ❖ Not available on Breman. and Sumner ❖ Not available on Breman. Rothshire. LaGrange. Laureldale. Caldera. Selena. Laureldale. Caldera. 2014 . Rothshire. Selena. and Sumner Effective March 17. LaGrange.✓ ♦ ✓ ✓ W1821/W1821SPD L or R ✓ W1824/W1824SPD L or R ✓ W1827/W1827SPD L or R Wickford ✓ W1818/W1818SPD L or R Pavillion W1815/W1815SPD L or R Meriden 6″ x 6 1/4″ Minimum Lyndhurst Maison Portico Usonian Avondale 6″ x 6″ Minimum Cambridge Chalet Charlotte Edgemont Lanai Manor Plantation Quincy Villa Anson Ellington Lonsdale Waterbury Wescott ART GLASS PANELS 6″ x 10″ Minimum 6″ x 12″ Minimum 8″ x 6″ Minimum 7 1/2″ x 7 1/2″ Minimum 6 1/2″ x 10″ Minimum ✓ ✓ ♦ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1830/W1830SPD L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1833/W1833SPD L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1836/W1836SPD L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1839/W1839SPD L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W1842/W1842SPD L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2112 ❖ ❖ W2115 ❖ ❖ W2118 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2121 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2124 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2127 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2130 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2133 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2136 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2139 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2142 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2412/W241224 ✓ ✓ ♦ ♦ W2415/W241524 ✓ ✓ ♦ ♦ ❖ ♦ W2418/W241824 ✓ ✓ ✓ ✓ ♦ ❖ ✓ ✓ Model GLASS INSERTS 58 Location ♦ W2418/W241824 L or R ✓ ✓ ✓ ✓ ✓ ✓ W2421/W242124 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2421/W242124 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2424/W242424 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2424/W242424 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2427/W242724 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2427/W242724 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2430 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2430 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2433 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2433 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2436 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2436 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2439 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2439 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2442 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2442 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2712 ✓ ✓ W2715 ✓ ✓ ♦ W2718 ✓ ✓ ✓ W2721 ✓ ✓ W2724 ✓ ✓ W2727 ✓ W2730 ✓ ♦ ✓ ✓ ♦ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2733 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2736 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2739 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2742 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2D15** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2D18** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W2D24** ✓ ✓ ✓ ✓ ♦ ❖ ✓ W2D24** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3012/W301224 ✓ ✓ W3015/W301524 ✓ ✓ ♦ W3018/W301824 ✓ ✓ ✓ W3021/W302124 ✓ ✓ W3024/W302424 ✓ ✓ W3027/W302724 ✓ W3030 ✓ ✓ ♦ ✓ ✓ ♦ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ◆ Available in FO door styles only except Breman. Caldera.Avondale Cambridge Chalet Charlotte Edgemont Lanai Manor Plantation Quincy Villa Lyndhurst Maison Portico Usonian Meriden Pavillion Wickford 6″ x 6″ Minimum 6″ x 6 1/4″ Minimum 6″ x 10″ Minimum 6″ x 12″ Minimum 8″ x 6″ Minimum 7 1/2″ x 7 1/2″ Minimum 6 1/2″ x 10″ Minimum W3033 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3036 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3039 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3042 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3312/W331224 ✓ ✓ ✓ ♦ W3315/W331524 ✓ ✓ ♦ ✓ ✓ ♦ W3318/W331824 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3321/W332124 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3324/W332424 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3327/W332724 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3330 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3333 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3336 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3339 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3342 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3412/W341224 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3415/W341524 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3418/W341824 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3421/W342124 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3424/W342424 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3427/W342724 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3612/W361224 ✓ ✓ ✓ ♦ W3615/W361524 ✓ ✓ ♦ ✓ ✓ ♦ W3618/W361824 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3621/W362124 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3624/W362424 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3627/W362724 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3630 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3633 ✓ ✓ ✓ ✓ ✓ ✓ ✓ Model Location W3636 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3639 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3642 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3712/W371224 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3715/W371524 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3718/W371824 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3721/W372124 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3724/W372424 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3727/W372724 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3912/W391224 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3915/W391524 ✓ ✓ ♦ ✓ ✓ ♦ W3918/W391824 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3921/W392124 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3924/W392424 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3927/W392724 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3930 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3933 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3936 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3939 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3942 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3D15** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3D18** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W3D24** ✓ ✓ ✓ ✓ ♦ ❖ ✓ W3D24** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4212/W421224 ❖ ❖ W4215/W421524 ❖ ❖ W4218/W421824 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4221/W422124 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4224/W422424 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4227/W422724 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4230 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4233 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4236 ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4239 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ◆ Available in FO door styles only except Breman. Laureldale. Laureldale. LaGrange. Caldera. and Sumner ♦ Effective March 17. Rothshire. 2014 59 GLASS INSERTS Anson Ellington Lonsdale Waterbury Wescott ART GLASS PANELS . Selena. and Sumner ❖ Not available on Breman. Rothshire. Selena. LaGrange. 2014 . LaGrange. and Sumner ♦ Effective March 17. Rothshire. Caldera. and Sumner ❖ Not available on Breman.W4242 ✓ ✓ ✓ ✓ W4512/W451224 ✓ ✓ W4515/W451524 ✓ ✓ W4518/W451824 ✓ ✓ ✓ GLASS INSERTS 60 W4521/W452124 ✓ ✓ W4524/W452424 ✓ ✓ W45** ✓ ✓ W4812/W481224 ✓ ✓ W4815/W481524 ✓ ✓ ♦ W4818/W481824 ✓ ✓ ✓ ✓ Wickford 6″ x 10″ Minimum Pavillion Cambridge Chalet Charlotte Edgemont Lanai Manor Plantation Quincy Villa 6″ x 6 1/4″ Minimum Location Meriden Avondale 6″ x 6″ Minimum Model Lyndhurst Maison Portico Usonian Anson Ellington Lonsdale Waterbury Wescott ART GLASS PANELS 6″ x 12″ Minimum 8″ x 6″ Minimum 7 1/2″ x 7 1/2″ Minimum 6 1/2″ x 10″ Minimum ✓ ✓ ✓ ✓ ♦ ♦ ♦ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ♦ ♦ ♦ ❖ ♦ ♦ ❖ ✓ ✓ W4818CS/W481824CS ✓ ✓ ✓ ✓ ✓ ✓ W4821/W482124 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4821CS/W482124CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4824/W482424 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4824CS/W482424CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4827/W482724 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4827CS/W482724CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4830 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4830CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4833 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4833CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4836 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4836CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4839 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4839CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ W4842 ✓ ✓ ✓ ✓ ♦ ❖ ✓ W4842CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ WAGD12/WAGD15 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ WAGD18/WAGD21 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WAGD24 ✓ ✓ ✓ ✓ ♦ ❖ ✓ WAGD24 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WAGD27 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WAGD30 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WAGD33 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WAGD36 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB12 L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ WB15 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB18 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB21 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB24 ✓ ✓ ✓ ✓ ♦ ❖ ✓ WB24 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB27 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB30 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB33 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB36 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB39 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB42 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB45 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WB48 ✓ ✓ ✓ ✓ ♦ ❖ ✓ WB48CS ✓ ✓ ✓ ✓ ✓ ✓ ✓ WBMW2736** ✓ ✓ ♦ ✓ ✓ ♦ WBMW2739** ✓ ✓ ✓ ✓ ✓ ✓ ✓ WBMW2742** ✓ ✓ ✓ ✓ ✓ ✓ ✓ WBMW3036** ✓ ✓ ♦ ✓ ✓ ♦ WBMW3039** ✓ ✓ ✓ ✓ ✓ ✓ ✓ WBMW3042** ✓ ✓ ✓ ✓ ✓ ✓ ✓ WC24** L or R ♦ ♦ ♦ ♦ WC27** L or R ✓ ✓ ✓ ✓ ♦ ♦ ✓ WC30** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WC33** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WC36** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WC3930 L or R ✓ ✓ ✓ ✓ ♦ ❖ ✓ WC4230 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ ◆ Available in FO door styles only except Breman. Selena. Laureldale. Laureldale. Selena. Caldera. LaGrange. Rothshire. 2014 . LaGrange. and Sumner ❖ Not available on Breman. Caldera. and Sumner Effective March 17. Laureldale.Anson Ellington Lonsdale Waterbury Wescott Avondale Cambridge Chalet Charlotte Edgemont Lanai Manor Plantation Quincy Villa Lyndhurst Maison Portico Usonian Meriden Pavillion Wickford ART GLASS PANELS 6″ x 6″ Minimum 6″ x 6 1/4″ Minimum 6″ x 10″ Minimum 6″ x 12″ Minimum 8″ x 6″ Minimum 7 1/2″ x 7 1/2″ Minimum 6 1/2″ x 10″ Minimum WC4530 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WC4830 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD2430 ✓ ✓ ♦ ♦ ❖ ♦ WCD2433 ✓ ✓ ✓ ✓ ♦ ❖ ✓ WCD2436 ✓ ✓ ✓ ✓ ♦ ❖ ✓ WCD2439 ✓ ✓ ✓ ✓ ♦ ❖ ✓ WCD2442 ✓ ✓ ✓ ✓ ♦ ❖ ✓ WCD3030 ✓ ✓ ♦ ✓ ✓ ♦ WCD3033 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD3036 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD3039 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD3042 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD3630 ✓ ✓ ♦ ✓ ✓ ♦ WCD3633 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD3636 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD3639 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCD3642 ✓ ✓ ✓ ✓ ✓ ✓ ✓ WCRO2130 L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WEC12** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WSR** L or R ✓ ✓ ✓ ✓ ✓ ✓ ✓ WTC12** ✓ ✓ ✓ ✓ ✓ ✓ ✓✓ Location 61 GLASS INSERTS Model ◆ Available in FO door styles only except Breman. Laureldale. Selena. LaGrange. Selena. Caldera. Rothshire. Rothshire. decorative glass selection will be shown with selected CG modification.INSTALLED TEXTURED GLASS PANELS 62 Bevel Bronze Fabric Centurian Clear Cocoa Rice Paper Cross Reeded Frost Hammered Marbleized Charcoal Marbleized Pearl Morisco Reeded Rice Paper Seeded Silhouette Strelli Textured glass panels available in the following door styles only when Mullion Door is ordered: Addison. Benson. 2014 . and Catalina. GLASS INSERTS • • • • • • • • • Antique Effective March 17. glass design will be turned horizontally and may not match desired pattern. No changes or cancellations will be accepted after 24 hours from acknowledgment of order. Door frame may reduce amount of glass shown. All glass is fully tempered or has a safety lamination. For glass shelf kits. see page 404. When textured glass is ordered for use in wall top hinge (WTH) or wall vertical lift (WVL) cabinets. Textured glass panels will be factory installed when ordered with a CG door. Cut for glass door must be ordered separately. On order acknowledgment. Buchanon. See page 44. Cartright. 2014 . Bronze Fabric Cocoa Rice Paper • Glass type: Bronze Fabric • Panel thickness: 9/32″ • Glass type: Cocoa Rice Paper • Panel thickness: 9/32″ GLASS INSERTS • Glass type: Clear • Panel thickness: 1/8″ Effective March 17.INSTALLED TEXTURED GLASS PANELS Antique Centurian Minimum Size 71/2” x 8” 63 All Sizes Configured to 17 Lite • Glass type: Antique • Panel thickness: 1/8″ Maximum Size 24” x 48” Bevel Clear • • • • • Glass type: Clear • Panel thickness: 1/8″ Glass type: Clear Panel thickness: 1/4″ Suggested to use with Square doors. Not compatible with Mullion Doors. INSTALLED TEXTURED GLASS PANELS Cross Reeded Marbleized Charcoal • Glass type: Cross Reeded • Panel thickness: 5/32″ • Glass type: Marbleized Charcoal • Panel thickness: 9/32″ Frost Marbleized Pearl • Glass type: Frost • Panel thickness: 5/32″ • Glass type: Marbleized Pearl • Panel thickness: 9/32″ Hammered Morisco • Glass type: Hammered • Panel thickness: 5/32″ • Glass type: Morisco • Panel thickness: 1/8″ GLASS INSERTS 64 Effective March 17. 2014 . 2014 . Seeded • Glass type: Seeded • Panel thickness: 9/32″ Effective March 17.INSTALLED TEXTURED GLASS PANELS Reeded Silhouette Minimum Size 6” x 81/2” 65 • Glass type: Reeded • Panel thickness: 5/32″ Rice Paper Strelli • Glass type: Rice Paper • Panel thickness: 9/32″ • Glass type: Strelli • Panel thickness: 5/32″ GLASS INSERTS • Glass type: Frost Etch • Panel thickness: 1/8″ • Suggested to use with Square doors. Rothshire. LaGrange. Laureldale. Rothshire. 2014 .✓ ACS42 ✓ B1240FH Silhouette ACS36/ACS39 Centurian No Minimum Antique Bevel Clear Cross Reeded Frost Hammered Morisco Reeded Seeded Strelli Bronze Fabric Cocoa Rice Paper Marbleized Charcoal Marbleized Pearl Rice Paper INSTALLED TEXTURED GLASS PANELS 6″ x 8″ or 8″ x 6″ or 10″ Diagonal Minimum 7 1/2″ x 8″ Minimum 6″ x 8 1/2″ Minimum ✓ ✓ ✓ ✓ ❖ ✓ ✓ ✓ ♦ ✓ B12FH ✓ ✓ ♦ ✓ B12** ✓ ✓ ♦ ✓ B1540FH** ✓ ✓ ✓ ✓ B15** ✓ ✓ ✓ ✓ B15FH** ✓ ✓ ✓ ✓ B1840FH** ✓ ✓ ✓ ✓ B18** ✓ ✓ ✓ ✓ B18FH** ✓ ✓ ✓ ✓ B2140FH** ✓ ✓ ✓ ✓ B21 L or R ✓ ✓ ✓ ✓ B24 ✓ ✓ ❖ ✓ B24** L or R ✓ ✓ ✓ ✓ B2440FH** ✓ ✓ ❖ ✓ B2440FH** L or R ✓ ✓ ✓ ✓ B24FH** ✓ ✓ ❖ ✓ B24FH** L or R ✓ ✓ ✓ ✓ B27** ✓ ✓ ✓ ✓ B2740FH** ✓ ✓ ✓ ✓ B27FH ✓ ✓ ✓ ✓ B27FHRT ✓ ✓ ✓ ✓ B30** ✓ ✓ ✓ ✓ B3040FH** ✓ ✓ ✓ ✓ B30FH** ✓ ✓ ✓ ✓ B33 ✓ ✓ ✓ ✓ B3340FH** ✓ ✓ ✓ ✓ B33FH** ✓ ✓ ✓ ✓ B36** ✓ ✓ ✓ ✓ B3640FH** ✓ ✓ ✓ ✓ B36FH** ✓ ✓ ✓ ✓ B39 ✓ ✓ ✓ ✓ B3940FH ✓ ✓ ✓ ✓ B39FH ✓ ✓ ✓ ✓ B42 ✓ ✓ ✓ ✓ B4240FH ✓ ✓ ✓ ✓ B42FH ✓ ✓ ✓ ✓ B4540FH ✓ ✓ ✓ ✓ B45FH ✓ ✓ ✓ ✓ B45FHRT ✓ ✓ ✓ ✓ B45RT ✓ ✓ ✓ ✓ B48 ✓ ✓ ❖ ✓ B48CS ✓ ✓ ✓ ✓ B4840FH ✓ ✓ ❖ ✓ B4840FHCS ✓ ✓ ✓ ✓ B48FH ✓ ✓ ❖ ✓ B48FHCS ✓ ✓ ✓ ✓ BC36 L or R ✓ ✓ BC39 L or R ✓ ✓ ♦ ✓ BC42 L or R ✓ ✓ ✓ ✓ BC45** L or R ✓ ✓ ✓ ✓ BC48** L or R ✓ ✓ ✓ ✓ BCC** ✓ ✓ ✓ ✓ BCFW36 L or R ✓ ✓ BCFW39 L or R ✓ ✓ ♦ ✓ BCFW42 L or R ✓ ✓ ✓ ✓ BCFW45/48** L or R ✓ ✓ ✓ ✓ BCP24 ✓ ✓ ❖ ✓ BCP24 L or R ✓ ✓ ✓ ✓ BCP24FH ✓ ✓ ❖ ✓ Model GLASS INSERTS 66 Location ◆ Available in FO door styles only except Breman. LaGrange. Selena. and Sumner ♦ ♦ Effective March 17. Laureldale. Caldera. and Sumner ❖ Not available on Breman. Caldera. Selena. Selena. Selena. 2014 67 GLASS INSERTS Bronze Fabric Cocoa Rice Paper Marbleized Charcoal Marbleized Pearl Rice Paper INSTALLED TEXTURED GLASS PANELS . and Sumner Effective March 17. Rothshire. Laureldale. 39. LaGrange. Laureldale. Caldera. 33. 42 ✓ ✓ ✓ ✓ CNTYSB48 ✓ ✓ ❖ ✓ CNTYSB48CS ✓ ✓ ✓ ✓ DAB36** ✓ ✓ ✓ ✓ DW12** ✓ ✓ ♦ DW15** ✓ ✓ ♦ ✓ DW18** ✓ ✓ ✓ ✓ Model Location ✓ ✓ ✓ ✓ DW302424D** Bottom ✓ ✓ ✓ ✓ DW302424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW24** DW30** DW302424P** Peninsula (2 doors) ✓ ✓ ❖ ✓ DW302424P** Front ✓ ✓ ✓ ✓ DW332424D** Bottom ✓ ✓ ✓ ✓ DW332424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW33** DW332424P** Peninsula (2 doors) ✓ ✓ ❖ ✓ DW332424P** Front ✓ ✓ ✓ ✓ DW362424D** Bottom ✓ ✓ ✓ ✓ DW362424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW36** DW362424P** Peninsula (2 doors) ✓ ✓ ❖ ✓ DW362424P** Front ✓ ✓ ✓ ✓ DW392424D** Bottom ✓ ✓ ✓ ✓ DW392424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW392424** DW392424P** Peninsula (2 doors) ✓ ✓ ❖ ✓ DW392424P** Front ✓ ✓ ✓ ✓ DW422424D** Bottom ✓ ✓ ✓ ✓ DW422424D** Top ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ DW422424** DW422424PL** Peninsula (2 doors) ✓ ✓ ❖ ✓ DW422424PL** Front ✓ ✓ ✓ ✓ FIC24 ✓ ✓ ❖ ✓ FIC30/36 ✓ ✓ ✓ ✓ MW**36 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ SB21 L or R ✓ ✓ ✓ ✓ SB24** ✓ ✓ ❖ ✓ SB24** L or R ✓ ✓ ✓ ✓ SB24R ✓ ✓ ✓ ✓ SB27** ✓ ✓ ✓ ✓ SB30** ✓ ✓ ✓ ✓ SB303427CC** ✓ ✓ ❖ ✓ SB33** ✓ ✓ ✓ ✓ SB36** ✓ ✓ ✓ ✓ SB39** ✓ ✓ ✓ ✓ SB42** ✓ ✓ ✓ ✓ SB45** ✓ ✓ ✓ ✓ SB453427** ✓ ✓ ✓ ✓ SB453427CC** ✓ ✓ ✓ ✓ SB48** ✓ ✓ ❖ ✓ SB48CS ✓ ✓ ✓ ✓ PY** Top Door Only ◆ Available in FO door styles only except Breman. LaGrange. Caldera.Antique Bevel Clear Cross Reeded Frost Hammered Morisco Reeded Seeded Strelli Centurian Silhouette No Minimum 6″ x 8″ or 8″ x 6″ or 10″ Diagonal Minimum 7 1/2″ x 8″ Minimum 6″ x 8 1/2″ Minimum BCP24FH L or R ✓ ✓ ✓ ✓ BEC24 ✓ ✓ ✓ ✓ BMW2448** ✓ ✓ ❖ ✓ BMW2448** L or R ✓ ✓ ✓ ✓ BMW2748** ✓ ✓ ✓ ✓ BMW3048** ✓ ✓ ✓ ✓ BTC12** ✓ ✓ ✓ ✓ CD** ✓ ✓ ✓ ✓ CNTYSB30. 36. Rothshire. and Sumner ❖ Not available on Breman. Selena. and Sumner ❖ Not available on Breman. LaGrange. Rothshire. Caldera. Selena. Laureldale. Caldera.Bronze Fabric Cocoa Rice Paper Marbleized Charcoal Marbleized Pearl Rice Paper Antique Bevel Clear Cross Reeded Frost Hammered Morisco Reeded Seeded Strelli Centurian Silhouette INSTALLED TEXTURED GLASS PANELS No Minimum 6″ x 8″ or 8″ x 6″ or 10″ Diagonal Minimum 7 1/2″ x 8″ Minimum 6″ x 8 1/2″ Minimum SB483427CS ✓ ✓ ✓ ✓ SB483427CC** ✓ ✓ ✓ ✓ SB48DCS ✓ ✓ ✓ ✓ Model GLASS INSERTS 68 Location STDW48** L or R Top/Bottom ✓ ✓ ✓ ✓ STDW51** L or R Top/Bottom ✓ ✓ ✓ ✓ STDW54** L or R Top/Bottom ✓ ✓ ✓ ✓ STDW57** L or R Top/Bottom ✓ ✓ ✓ ✓ STDW60** L or R Top/Bottom ✓ ✓ ✓ ✓ STW12** L or R Top/Bottom ✓ ✓ ♦ ✓ STW15** L or R Top/Bottom ✓ ✓ ✓ ✓ STW18** L or R Top/Bottom ✓ ✓ ✓ ✓ STW21** L or R Top/Bottom ✓ ✓ ✓ ✓ STW24** Top/Bottom ✓ ✓ ❖ ✓ STW24** L or R Top/Bottom ✓ ✓ ✓ ✓ STW27** Top/Bottom ✓ ✓ ✓ ✓ STW30** Top/Bottom ✓ ✓ ✓ ✓ STW33** Top/Bottom ✓ ✓ ✓ ✓ STW36** Top/Bottom ✓ ✓ ✓ ✓ STW39** Top/Bottom ✓ ✓ ✓ ✓ STW42** Top/Bottom ✓ ✓ ✓ ✓ STW45** Top/Bottom ✓ ✓ ✓ ✓ STW48** Top/Bottom ✓ ✓ ❖ ✓ STW48**CS Top/Bottom ✓ ✓ ✓ ✓ STW4851 Top/Bottom ✓ ✓ ❖ ✓ STWEC12** Top ✓ ✓ ✓ ✓ STWEC12** Bottom ✓ ✓ ✓ ✓ STWTC12** Top/Bottom ✓ ✓ ✓ ✓ TD12** L or R ✓ ✓ ♦ ✓ TD15** L or R ✓ ✓ ✓ ✓ TPP12** L or R Top Door Only ✓ ✓ ♦ ✓ TPP15** L or R Top Door Only ✓ ✓ ✓ ✓ TPP18** L or R Top Door Only ✓ ✓ ✓ ✓ U12** L or R Top Door Only ✓ ✓ ♦ ✓ U15** L or R Top Door Only ✓ ✓ ✓ ✓ U18** L or R Top Door Only ✓ ✓ ✓ ✓ U21** L or R Top Door Only ✓ ✓ ✓ ✓ U24** L or R Top Door Only ✓ ✓ ✓ ✓ U24** Top Door Only ✓ ✓ ❖ ✓ U27** Top Door Only ✓ ✓ ✓ ✓ U30** Top Door Only ✓ ✓ ✓ ✓ U33** Top Door Only ✓ ✓ ✓ ✓ U36** Top Door Only ✓ ✓ ✓ ✓ UOC24** Top Door Only ✓ ✓ ❖ ✓ US21** Top Door Only ✓ ✓ ✓ ✓ W1212 L or R ✓ ♦ ♦ W1215 L or R ✓ ✓ ♦ ✓ W1218 L or R ✓ ✓ ♦ ✓ W1221 L or R ✓ ✓ ♦ ✓ W1224 L or R ✓ ✓ ♦ ✓ W1227 L or R ✓ ✓ ♦ ✓ W1230 L or R ✓ ✓ ♦ ✓ W1233 L or R ✓ ✓ ♦ ✓ W1236 L or R ✓ ✓ ♦ ✓ W1239 L or R ✓ ✓ ♦ ✓ W1242 L or R ✓ ✓ ♦ ✓ W1512 L or R ✓ ✓ ♦ W1515 L or R ✓ ✓ ✓ ✓ W1518 L or R ✓ ✓ ✓ ✓ W1521 L or R ✓ ✓ ✓ ✓ W1524 L or R ✓ ✓ ✓ ✓ W1527 L or R ✓ ✓ ✓ ✓ ◆ Available in FO door styles only except Breman. and Sumner Effective March 17. Laureldale. 2014 . Rothshire. LaGrange. and Sumner ❖ Not available on Breman. Rothshire. Selena. Caldera. and Sumner 69 ❖ Effective March 17. Laureldale. Caldera. 2014 GLASS INSERTS Model . Laureldale. LaGrange. Selena. LaGrange. Rothshire.Bronze Fabric Cocoa Rice Paper Marbleized Charcoal Marbleized Pearl Rice Paper Antique Bevel Clear Cross Reeded Frost Hammered Morisco Reeded Seeded Strelli Centurian Silhouette INSTALLED TEXTURED GLASS PANELS No Minimum 6″ x 8″ or 8″ x 6″ or 10″ Diagonal Minimum 7 1/2″ x 8″ Minimum 6″ x 8 1/2″ Minimum W1530 L or R ✓ ✓ ✓ ✓ W1533 L or R ✓ ✓ ✓ ✓ W1536 L or R ✓ ✓ ✓ ✓ W1539 L or R ✓ ✓ ✓ ✓ W1542 L or R ✓ ✓ ✓ ✓ W1812 L or R ✓ ✓ ♦ W1815/W1815SPD L or R ✓ ✓ ✓ ✓ W1818/W1818SPD L or R ✓ ✓ ✓ ✓ W1821/W1821SPD L or R ✓ ✓ ✓ ✓ W1824/W1824SPD L or R ✓ ✓ ✓ ✓ W1827/W1827SPD L or R ✓ ✓ ✓ ✓ W1830/W1830SPD L or R ✓ ✓ ✓ ✓ W1833/W1833SPD L or R ✓ ✓ ✓ ✓ W1836/W1836SPD L or R ✓ ✓ ✓ ✓ W1839/W1839SPD L or R ✓ ✓ ✓ ✓ W1842/W1842SPD L or R ✓ ✓ ✓ ✓ W2112 ✓ ♦ W2115 ✓ ✓ W2118 L or R ✓ ✓ ✓ ✓ W2121 L or R ✓ ✓ ✓ ✓ W2124 L or R ✓ ✓ ✓ ✓ W2127 L or R ✓ ✓ ✓ ✓ W2130 L or R ✓ ✓ ✓ ✓ W2133 L or R ✓ ✓ ✓ ✓ W2136 L or R ✓ ✓ ✓ ✓ W2139 L or R ✓ ✓ ✓ ✓ W2142 L or R ✓ ✓ ✓ ✓ W2412/W241224 ✓ ♦ ♦ W2415/W241524 ✓ ✓ ♦ ✓ W2418/W241824 ✓ ✓ ❖ ✓ W2418/W241824 L or R ✓ ✓ ✓ ✓ W2421/W242124 ✓ ✓ ❖ ✓ W2421/W242124 L or R ✓ ✓ ✓ ✓ W2424/W242424 ✓ ✓ ❖ ✓ W2424/W242424 L or R ✓ ✓ ✓ ✓ W2427/W242724 ✓ ✓ ❖ ✓ W2427/W242724 L or R ✓ ✓ ✓ ✓ W2430 ✓ ✓ ❖ ✓ W2430 L or R ✓ ✓ ✓ ✓ W2433 ✓ ✓ ❖ ✓ W2433 L or R ✓ ✓ ✓ ✓ W2436 ✓ ✓ ❖ ✓ W2436 L or R ✓ ✓ ✓ ✓ W2439 ✓ ✓ ❖ ✓ W2439 L or R ✓ ✓ ✓ ✓ W2442 ✓ ✓ ❖ ✓ W2442 L or R ✓ ✓ ✓ ✓ W2712 ✓ ✓ ♦ W2715 ✓ ✓ ✓ ✓ W2718 ✓ ✓ ✓ ✓ W2721 ✓ ✓ ✓ ✓ W2724 ✓ ✓ ✓ ✓ W2727 ✓ ✓ ✓ ✓ W2730 ✓ ✓ ✓ ✓ W2733 ✓ ✓ ✓ ✓ W2736 ✓ ✓ ✓ ✓ W2739 ✓ ✓ ✓ ✓ W2742 ✓ ✓ ✓ ✓ W2D15** L or R ✓ ✓ ✓ ✓ W2D18** L or R ✓ ✓ ✓ ✓ W2D24** ✓ ✓ ❖ ✓ Location ◆ Available in FO door styles only except Breman. and Sumner Effective March 17. LaGrange. Caldera. Rothshire. and Sumner ❖ Not available on Breman. Laureldale. Selena. Rothshire. Laureldale. Selena. Caldera. 2014 . LaGrange.Bronze Fabric Cocoa Rice Paper Marbleized Charcoal Marbleized Pearl Rice Paper Antique Bevel Clear Cross Reeded Frost Hammered Morisco Reeded Seeded Strelli Centurian Silhouette INSTALLED TEXTURED GLASS PANELS No Minimum 6″ x 8″ or 8″ x 6″ or 10″ Diagonal Minimum 7 1/2″ x 8″ Minimum 6″ x 8 1/2″ Minimum W2D24** L or R ✓ ✓ ✓ ✓ W3012/W301224 ✓ ✓ ♦ W3015/W301524 ✓ ✓ ✓ ✓ W3018/W301824 ✓ ✓ ✓ ✓ W3021/W302124 ✓ ✓ ✓ ✓ W3024/W302424 ✓ ✓ ✓ ✓ W3027/W302724 ✓ ✓ ✓ ✓ W3030 ✓ ✓ ✓ ✓ W3033 ✓ ✓ ✓ ✓ W3036 ✓ ✓ ✓ ✓ W3039 ✓ ✓ ✓ ✓ W3042 ✓ ✓ ✓ ✓ W3312/W331224 ✓ ✓ ♦ W3315/W331524 ✓ ✓ ✓ ✓ W3318/W331824 ✓ ✓ ✓ ✓ W3321/W332124 ✓ ✓ ✓ ✓ W3324/W332424 ✓ ✓ ✓ ✓ W3327/W332724 ✓ ✓ ✓ ✓ W3330 ✓ ✓ ✓ ✓ W3333 ✓ ✓ ✓ ✓ W3336 ✓ ✓ ✓ ✓ W3339 ✓ ✓ ✓ ✓ W3342 ✓ ✓ ✓ ✓ W3412/W341224 ✓ ✓ ✓ ✓ W3415/W341524 ✓ ✓ ✓ ✓ W3418/W341824 ✓ ✓ ✓ ✓ W3421/W342124 ✓ ✓ ✓ ✓ W3424/W342424 ✓ ✓ ✓ ✓ W3427/W342724 ✓ ✓ ✓ ✓ W3612/W361224 ✓ ✓ ♦ W3615/W361524 ✓ ✓ ✓ ✓ W3618/W361824 ✓ ✓ ✓ ✓ W3621/W362124 ✓ ✓ ✓ ✓ W3624/W362424 ✓ ✓ ✓ ✓ W3627/W362724 ✓ ✓ ✓ ✓ W3630 ✓ ✓ ✓ ✓ W3633 ✓ ✓ ✓ ✓ W3636 ✓ ✓ ✓ ✓ W3639 ✓ ✓ ✓ ✓ W3642 ✓ ✓ ✓ ✓ W3712/W371224 ✓ ✓ ✓ ✓ W3715/W371524 ✓ ✓ ✓ ✓ W3718/W371824 ✓ ✓ ✓ ✓ W3721/W372124 ✓ ✓ ✓ ✓ W3724/W372424 ✓ ✓ ✓ ✓ W3727/W372724 ✓ ✓ ✓ ✓ W3912/W391224 ✓ ✓ ♦ W3915/W391524 ✓ ✓ ✓ ✓ W3918/W391824 ✓ ✓ ✓ ✓ W3921/W392124 ✓ ✓ ✓ ✓ W3924/W392424 ✓ ✓ ✓ ✓ W3927/W392724 ✓ ✓ ✓ ✓ W3930 ✓ ✓ ✓ ✓ W3933 ✓ ✓ ✓ ✓ W3936 ✓ ✓ ✓ ✓ W3939 ✓ ✓ ✓ ✓ W3942 ✓ ✓ ✓ ✓ W3D15** L or R ✓ ✓ ✓ ✓ W3D18** L or R ✓ ✓ ✓ ✓ W3D24** ✓ ✓ ❖ ✓ W3D24** L or R ✓ ✓ ✓ ✓ Model GLASS INSERTS 70 Location ◆ Available in FO door styles only except Breman. Selena. LaGrange. Caldera. Rothshire. Laureldale. and Sumner ❖ Effective March 17. Laureldale. LaGrange. and Sumner ❖ Not available on Breman. Rothshire. Caldera. Selena. 2014 71 GLASS INSERTS Location Antique Bevel Clear Cross Reeded Frost Hammered Morisco Reeded Seeded Strelli Model Bronze Fabric Cocoa Rice Paper Marbleized Charcoal Marbleized Pearl Rice Paper INSTALLED TEXTURED GLASS PANELS .Centurian Silhouette No Minimum 6″ x 8″ or 8″ x 6″ or 10″ Diagonal Minimum 7 1/2″ x 8″ Minimum 6″ x 8 1/2″ Minimum W4212/W421224 ✓ ♦ W4215/W421524 ✓ ✓ W4218/W421824 ✓ ✓ ✓ ✓ W4221/W422124 ✓ ✓ ✓ ✓ W4224/W422424 ✓ ✓ ✓ ✓ W4227/W422724 ✓ ✓ ✓ ✓ W4230 ✓ ✓ ✓ ✓ W4233 ✓ ✓ ✓ ✓ W4236 ✓ ✓ ✓ ✓ W4239 ✓ ✓ ✓ ✓ W4242 ✓ ✓ ✓ ✓ W4512/W451224 ✓ ♦ ♦ W4515/W451524 ✓ ✓ ♦ ♦ W4518/W451824 ✓ ✓ ✓ ✓ W4521/W452124 ✓ ✓ ✓ ✓ W4524/W452424 ✓ ✓ ✓ ✓ W45** ✓ ✓ ✓ ✓ W4812/W481224 ✓ ♦ ♦ W4815/W481524 ✓ ✓ ♦ ✓ W4818/W481824 ✓ ✓ ❖ ✓ W4818CS/W481824CS ✓ ✓ ✓ ✓ W4821/W482124 ✓ ✓ ❖ ✓ W4821CS/W482124CS ✓ ✓ ✓ ✓ W4824/W482424 ✓ ✓ ❖ ✓ W4824CS/W482424CS ✓ ✓ ✓ ✓ W4827/W482724 ✓ ✓ ❖ ✓ W4827CS/W482724CS ✓ ✓ ✓ ✓ W4830 ✓ ✓ ❖ ✓ W4830CS ✓ ✓ ✓ ✓ W4833 ✓ ✓ ❖ ✓ W4833CS ✓ ✓ ✓ ✓ W4836 ✓ ✓ ❖ ✓ W4836CS ✓ ✓ ✓ ✓ W4839 ✓ ✓ ❖ ✓ W4839CS ✓ ✓ ✓ ✓ W4842 ✓ ✓ ❖ ✓ W4842CS ✓ ✓ ✓ ✓ WAGD12/WAGD15 L or R ✓ ✓ ♦ ✓ WAGD18/WAGD21 L or R ✓ ✓ ✓ ✓ WAGD24 ✓ ✓ ❖ ✓ WAGD24 L or R ✓ ✓ ✓ ✓ WAGD27 ✓ ✓ ✓ ✓ WAGD30 ✓ ✓ ✓ ✓ WAGD33 ✓ ✓ ✓ ✓ WAGD36 ✓ ✓ ✓ ✓ WB12 L or R ✓ ✓ ♦ ✓ WB15 L or R ✓ ✓ ✓ ✓ WB18 L or R ✓ ✓ ✓ ✓ WB21 L or R ✓ ✓ ✓ ✓ WB24 ✓ ✓ ❖ ✓ WB24 L or R ✓ ✓ ✓ ✓ WB27 ✓ ✓ ✓ ✓ WB30 ✓ ✓ ✓ ✓ WB33 ✓ ✓ ✓ ✓ WB36 ✓ ✓ ✓ ✓ WB39 ✓ ✓ ✓ ✓ WB42 ✓ ✓ ✓ ✓ WB45 ✓ ✓ ✓ ✓ WB48 ✓ ✓ ❖ ✓ WB48CS ✓ ✓ ✓ ✓ WBMW2736** ✓ ✓ ✓ ✓ ◆ Available in FO door styles only except Breman. Rothshire. Rothshire. 2014 . Laureldale. Selena. LaGrange. Selena. LaGrange.Bronze Fabric Cocoa Rice Paper Marbleized Charcoal Marbleized Pearl Rice Paper Antique Bevel Clear Cross Reeded Frost Hammered Morisco Reeded Seeded Strelli Centurian Silhouette INSTALLED TEXTURED GLASS PANELS No Minimum 6″ x 8″ or 8″ x 6″ or 10″ Diagonal Minimum 7 1/2″ x 8″ Minimum 6″ x 8 1/2″ Minimum WBMW2739** ✓ ✓ ✓ ✓ WBMW2742** ✓ ✓ ✓ ✓ WBMW3036** ✓ ✓ ✓ ✓ WBMW3039** ✓ ✓ ✓ ✓ WBMW3042** ✓ ✓ ✓ ✓ WC24** L or R ♦ ♦ WC27** L or R ✓ ✓ ♦ ✓ WC30** L or R ✓ ✓ ✓ ✓ WC33** L or R ✓ ✓ ✓ ✓ WC36** L or R ✓ ✓ ✓ ✓ WC3930 L or R ✓ ✓ ❖ ✓ WC4230 L or R ✓ ✓ ✓ ✓ WC4530 L or R ✓ ✓ ✓ ✓ WC4830 L or R ✓ ✓ ✓ ✓ WCD2430 ✓ ✓ ♦ ✓ WCD2433 ✓ ✓ ❖ ✓ WCD2436 ✓ ✓ ❖ ✓ WCD2439 ✓ ✓ ❖ ✓ WCD2442 ✓ ✓ ❖ ✓ WCD3030 ✓ ✓ ✓ ✓ WCD3033 ✓ ✓ ✓ ✓ WCD3036 ✓ ✓ ✓ ✓ WCD3039 ✓ ✓ ✓ ✓ WCD3042 ✓ ✓ ✓ ✓ WCD3630 ✓ ✓ ✓ ✓ WCD3633 ✓ ✓ ✓ ✓ WCD3636 ✓ ✓ ✓ ✓ WCD3639 ✓ ✓ ✓ ✓ WCD3642 ✓ ✓ ✓ ✓ WCRO2130 L or R ✓ ✓ ✓ ✓ WEC12** L or R ✓ ✓ ✓ ✓ WSR** L or R ✓ ✓ ✓ ✓ WTC12** ✓ ✓ ✓ ✓ WTH3012/WTH301224 ✓ ✓ ♦ ✓ WTH3015/WTH301524 ✓ ✓ ✓ ✓ WTH3018/WTH301824 ✓ ✓ ✓ ✓ WTH3021/WTH302124 ✓ ✓ ✓ ✓ WTH3612/WTH361224 ✓ ✓ ♦ ✓ WTH3615/WTH361524 ✓ ✓ ✓ ✓ WTH3618/WTH361824 ✓ ✓ ✓ ✓ WTH3621/WTH362124 ✓ ✓ ✓ ✓ WVL3018/WVL301824 ✓ ✓ ✓ ✓ WVL3021/WVL302124 ✓ ✓ ✓ ✓ WVL3618/WVL361824 ✓ ✓ ✓ ✓ WVL3621/WVL362124 ✓ ✓ ✓ ✓ Model GLASS INSERTS 72 Location ◆ Available in FO door styles only except Breman. Laureldale. Caldera. Caldera. and Sumner ❖ Not available on Breman. and Sumner ♦ Effective March 17. 2014 .ART & TEXTURED GLASS PANELS ART GLASS PANELS STYLE PANEL THICKNESS CAMING MATERIAL Anson 1/4″ Zinc Black Patina Avondale Cambridge Chalet Charlotte Edgemont Ellington Lanai Lonsdale Lyndhurst Maison Manor Meriden Pavillion Plantation Portico Quincy Usonian Villa Waterbury Wescott Wickford 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ 1/4″ Zinc Zinc Black Patina Zinc Zinc Zinc Zinc Zinc Zinc Zinc Black Patina Zinc Zinc Zinc Zinc Zinc Black Patina Zinc Black Patina Zinc Copper Zinc Zinc Black Patina Zinc Black Patina Zinc 73 STYLE PANEL THICKNESS Antique 1/8″ Bevel Bronze Fabric Centurian Clear Cocoa Rice Paper Cross Reeded Frost Hammered Marbleized Charcoal Marbleized Pearl Morisco Reeded Rice Paper Seeded Silhouette Strelli 1/4″ 9/32″ 1/8″ 1/8″ 9/32″ 5/32″ 5/32″ 5/32″ 9/32″ 9/32″ 1/8″ 5/32″ 9/32″ 9/32″ 1/8″ 5/32″ GLASS INSERTS TEXTURED GLASS PANELS Effective March 17. 17″ 12″ .23″ 18″ .14″ 41/2” 11/2” BASE CABINET 33/8” Cabinet Depth 11/2” 3/8” 3/4” 33/8” 33/8” 3/8” 41/2” 11/2” 319/32” 33/8” 24” 3/4” 3” 201/2” WALL CABINET 201/2” 341/2” 74 41/2” ● 11/2” ● ● ● 24” 341/2” 11/2” 85/8” 3” 87/8” 2” 41/2” 11/2” 63/8” 63/8” ● ● 41/2” 11/2” ● 12” ● ● 63/8” 11/2” 2” ● 341/2” ● ● 33/8” 63/8” ● 15” ● 30” ● 15” ● ● 12” ● 3/8” 41/2” ● ● 11/2” ● ● 3/4” 11/2” 18” ● 24” 3/8” 41/2” ● 3/4” 201/2” ● ● 3/8” 2” 11/2” ● 3/4” 41/2” 3/8” 24” 24” 11/2” 12” 3/4” Effective March 17.20″ 15″ .CABINET DIMENSIONS ● ● ● ● ● ● ● ● ● BASE CABINET with TOEKICK DRAWER 21 or 24” 11/2” 3/4” 3/8” 33/8” 32″ HIGH VANITY CABINET 41/2” 41/2” 41/2” FOUR-DRAWER BASE CABINET 29” 341/2” 11/2” 32” 11/2” 11/2” 71/2” 41/2” 33/8” 11/2” 15” 2” 2” 41/2” 2” 41/2” 3/8” 3/8” 41/2” 41/2” 3/4” 21” 3/4” 2” 41/2” 2” 341/2” 11/2” 18 or 21” 3/8” THREE-DRAWER BASE CABINET 1 2” 4 /2” 11/2” 11/2” 1 1 2” 4 /2” 2” 4 /2” 14” 10” 341/2” 3/4” 33/8” TWO-DRAWER BASE CABINET 24” THREE-DRAWER BASE CABINET with DEEP DRAWER 33/8” 34 1/2″ HIGH VANITY CABINET 33/8” DESK BASE CABINET Exterior Drawer Box and Roll Tray Depth 21″ 18″ 15″ 12″ 9 7/16″ CABINET DIMENSIONS 24″ 21″ . 2014 . 20″ 15″ . 2014 .CABINET DIMENSIONS 11/2” 15” 9” 3/8” 24” 3/4” 3/8” 3” 3” 24” 3/4” 15” 3/8” 9” 3/4” 15” 15” 3/8” 11/2” 24” 11/2” 11/2” 12 or 24” 3/4” 39” 84” 84” l l l l l l l l l 33/8” DOUBLE OVEN CABINET 11/2” 3 /8 ” 191/2” l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l 241/2” 3 1 /2 ” 201/2” 31/2” l 3” 33/8” LC/LCRH Cabinet Depth 24″ 21″ .23″ 18″ .14″ 3 3 /8 ” CABINET DIMENSIONS 27” 3 /4 ” 11 /2 ” l l 241/2” l 84” 461/2” 15” 1 41/2” 1 /2” 11/2” 84” SINGLE OVEN CABINET 21” 3 /8 ” 41/2” 1 1 /2 ” 41/2” 11/2” PANTRY CABINET 21” 3 /4 ” 5” 33/8” 33/8” 33/8” UTILITY CABINET 41/2” 41/2” 41/2” 41/2” 11/2” 11/2” 15” 9” 9” 84” 581/2” 581/2” 84” 281/2” 75 VANITY UTILITY Exterior Drawer Box and Roll Tray Depth 21″ 18″ 15″ 12″ 9 7/16″ Effective March 17.17″ 12″ . 41/2” 201/2” 3” 3” 6” 11/2” 11/2” Thick Countertop 84” OMC 15” 3” 11/2” CT/ST/WAGD 84” OCD 84” U/PY 15” 18” 11/2” 11/2” W2D48 W33 W30 TOEKICK AREA PANEL OPENING 41/2” TOEKICK AREA 9” 151/8” 41/2” TOEKICK AREA TOEKICK AREA 87” OMC 87” MCC 87″ HIGH APPLICATION Number after Wall Cabinet Represents Height of Cabinet W12 11/2” W15 9” W18 12” W21 15” 18” 11/2” 11/2” W24 (231/2”) W27 (271/2”) W2D51 W33 W3D51 241/2” 30” 30” 27” 11/2” Thick Countertop 11/2” 6” 3” WSD/WO 11/2” 18” B Base with DRWTK 41/2” 41/2” 71/2” 2DBRT 3DB 3DBDD 41/2” 41/2” 12” 201/2” 3” 201/2” 11/2” TOEKICK AREA 41/2” 3” 18” 161/2” 12” 41/2” 3” 319/32” TOEKICK AREA • 1 1/2″ Top and Bottom Rails . Effective March 17. • 3″ Center Vertical Rails on Wall and Base Cabinets to Divide Double Door Cabinets on 39″ Wide and Over. • 1 1/2″ Vertical Stiles. • 8 5/8″ and 8 7/8″ Drawer Opening = 9 7/8″ Drawer Front.CABINET DIMENSIONS 84″ HIGH APPLICATION Number after Wall Cabinet Represents Height of Cabinet W12 11/2” W15 9” W18 12” W24 (231/2”) W27 (271/2”) W21 15” 76 W3D48 201/2” 241/2” 30” 27” 27” 3” 27” 18” 161/2” Base with DRWTK B 11/2” 41/2” 2” 30” 2DBRT 3DB 41/2” 201/2” 319/32” 41/2” 2” 4DB 11/2” 41/2” 2” 11/2” 23/ 8” 2” 41/2” 3” 8 7/ 8” 18” 2” OPENING TOEKICK AREA 9” PANEL 2” TOEKICK AREA 18” 9” 581/2” 71/2” TOEKICK AREA 3” PANEL 39” 41/2” 14” 8 5/ 8 ” TOEKICK AREA 18” 41/2” 3” 11/2” TOEKICK AREA 41/2” 8 7/ 8 ” 3” 41/2” 71/2” 41/2” 12” 12” 41/2” 3DBDD 27” 3” 2” 3” 11/2” 3” 27/8” 41/2” 18” 84” MCC 15” PANEL 9” 21/8” 3” WSD/WO WSD/WO used with a 231/2” high Wall Cabinet will only equal 291/2”. • 7 1/2″ High Drawer Opening = 8 1/2″ Drawer Front. • 4 1/2″ High Drawer Opening = 6 1/4″ Drawer Front. 11/2” 21/8” 27/8” 2” 41/2” 2” 41/2” 4DB 11/2” 85/8” TOEKICK AREA 3” PANEL 9” 18” PANEL 39” 3” 18” 9” 11/2” 581/2” 2 3/ 8” 2” 41/2” 3” 87/8” 18” 41/2” 2” 2” 3” 3” 18” 30” 41/2” 41/2” 87/8” 3” 3” 18” 30” 3” 2” 30” 87” OCD 87” U/PY 18” 201/2” 11/2” CT/ST/WAGD CABINET DIMENSIONS W30 41/2” PANEL 2” 14” 71/2” TOEKICK AREA TOEKICK AREA OPENING TOEKICK AREA Full Overlay Door Styles: • 1/4″ Reveal Around Doors (1/4″ of Face Frame Shows). • 8 5/8″ and 8 7/8″ Drawer Opening = 11 3/8″ Drawer Front. • 4 1/2″ High Drawer Opening = 5 1/2″ Drawer Front.Wall and Base Cabinets. • Frame Opening + 2 1/2″ = Door Size for Base/Wall Cabinets. 9” 41/2” TOEKICK AREA PANEL OPENING 9” 151/8” 41/2” TOEKICK AREA TOEKICK AREA 1/2″ Overlay Door Styles: • 1″ Reveal Around Doors (1″ of Face Frame Shows). • Frame Opening + 1″ = Door Size for Base/Wall Cabinets. 2014 . • 7 1/2″ High Drawer Opening = 10″ Drawer Front. • 1 1/2″ Vertical Stiles. • 4 1/2″ High Drawer Opening = 6 1/4″ Drawer Front. • 8 5/8″ and 8 7/8″ Drawer Opening = 11 3/8″ Drawer Front. • 7 1/2″ High Drawer Opening = 8 1/2″ Drawer Front. • 8 5/8″ and 8 7/8″ Drawer Opening = 9 7/8″ Drawer Front. TOEKICK AREA 71/2” 3DBDD 11/2” 3DB 11/2” 41/2” 3” 41/2” 3” WSD/WO 11/2” 8 7/ 8 ” 3” 41/2” 41/2” 41/2” 2” 8 5/ 8 ” TOEKICK AREA 41/2” 14” 3” PANEL 18” 9” 11/2” 39” 581/2” 2 3 / 8” 2” 41/2” 3” 8 7/ 8 ” 18” 2” TOEKICK AREA 9” PANEL 2” 71/2” TOEKICK AREA 3” PANEL 9” 18” 21/8” 27/8” 2” 41/2” 2” 41/2” 4DB 11/2” 41/2” 93” MCC OPENING PEDESTAL Full Overlay Door Styles: • 1/4″ Reveal Around Doors (1/4″ of Face Frame Shows). 2014 CABINET DIMENSIONS W12 11/2” . • 4 1/2″ High Drawer Opening = 5 1/2″ Drawer Front. Effective March 17. 41/2” PEDESTAL PANEL OPENING 9” 151/8” 41/2” PEDESTAL PEDESTAL 1/2″ Overlay Door Styles: • 1″ Reveal Around Doors (1″ of Face Frame Shows). • Frame Opening + 2 1/2″ = Door Size for Base/Wall Cabinets. • Frame Opening + 1″ = Door Size for Base/Wall Cabinets. • 3″ Center Vertical Rails on Wall and Base Cabinets to Divide Double Door Cabinets on 39″ Wide and Over.Wall and Base Cabinets. • 7 1/2″ High Drawer Opening = 10″ Drawer Front.CABINET DIMENSIONS 90″ HIGH APPLICATION Number after Wall Cabinet Represents Height of Cabinet W12 11/2” 9” W15 W18 12” W21 15” W24 (231/2”) W27 (271/2”) 18” 201/2” 11/2” 11/2” W30 W33 27” 30” 241/2” W36 W2D54 W3D54 33” 33” 33” 90” U/PY 90” OCD 3” 201/2” 11/2” 6” CT/ST/WAGD 11/2” Thick Countertop 18” 18” 161/2” B Base with DRWTK 41/2” 41/2” 11/2” 71/2” 2DBRT 2” 3DB 3DBDD 11/2” 41/2” 41/2” 12” 30” 201/2” 201/2” 12” 319/32” TOEKICK AREA TOEKICK AREA 18” 18” 9” 11/2” 581/2” 2 3/ 8 ” 2” 41/2” 3” 87/8” 18” 2” 71/2” TOEKICK AREA 9” PANEL 2” 14” TOEKICK AREA 3” PANEL 39” 41/2” 85/8” 77 31/2” 41/2” 2” 3” 3” 201/2” PANEL 91/2” 41/2” 41/2” 87/8” 3” 11/2” 41/2” 41/2” 3” 90” MCC 33” 21/8” 27/8” 2” 41/2” 2” 41/2” 4DB 11/2” 3” WSD/WO 3” 3” 201/2” 31/2” 11/2” 90” OMC OPENING TOEKICK AREA TOEKICK AREA PANEL OPENING 41/2” TOEKICK AREA 9” 151/8” 41/2” TOEKICK AREA TOEKICK AREA 93″ HIGH APPLICATION Number after Wall Cabinet Represents Height of Cabinet 9” W15 W18 12” 15” W21 18” 11/2” 11/2” W24 (231/2”)W27 (271/2”) 201/2” 241/2” W30 W33 27” 30” 11/2” W36 W39 W2D57 W3D57 33” 36” 36” 36” 93” U/PY 93” OCD 93” OMC 24” 24” 24” 36” 3” CT/ST/WAGD 6” 11/2” Thick Countertop 11/2” 2” 30” 18” B 41/2” 201/2” 161/2” Base with DRWTK 41/2” 18” 2DBRT 41/2” 12” 3” 201/2” 12” TOEKICK AREA 319/32” • 1 1/2″ Top and Bottom Rails . CABINET DIMENSIONS 96″ HIGH APPLICATION Number after Wall Cabinet Represents Height of Cabinet 11/2” W12 9” 78 W15 W18 12” 15” W21 W24 (231/2”)W27 (271/2”) 18” 201/2” 11/2” 11/2” 241/2” W30 W33 27” 30” W36 33” W39 W42 W2D60 W3D60 39” 39” 39” 3” 27” 36” 11/2” 96” OCD 96” U/PY CT/ST/WAGD 6” 11/2” Thick Countertop 11/2” 2” 30” 18” B 41/2” 201/2” 161/2” Base with DRWTK 41/2” 18” 71/2” 2DBRT 3” 201/2” 12” TOEKICK AREA 319/32” 3DB 3DBDD 11/2” 41/2” 41/2” 12” 11/2” 41/2” 3” 41/2” 3” WSD/WO TOEKICK AREA 41/2” 87/8” 3” 2” 41/2” 41/2” 14” 3” 27” 3” PANEL 9” 18” 3” PANEL 18” 9” 11/2” 39” 581/2” 2 3/ 8 ” 2” 41/2” 3” 8 7/ 8 ” 18” 2” TOEKICK AREA 9” PANEL 2” 71/2” TOEKICK AREA 96” MCC 39” 41/2” 85/8” TOEKICK AREA 21/8” 27/8” 2” 41/2” 2” 41/2” 4DB 11/2” 3” 3” 27” 3” 11/2” 96” OMC OPENING PEDESTAL 41/2” PEDESTAL PANEL OPENING 9” 151/8” 41/2” PEDESTAL PEDESTAL CABINET DIMENSIONS 5-PIECE DRAWER FRONT DIMENSIONS CHART 5-PIECE DRAWER FRONTS DRAWER FRONT WIDTH Anden 8 1/2″ Bailey DFF5PC 8 1/2″ Benson DFF5PC 8 1/2″ Breman DFF5PC 8 1/2″ Buchanon 8 1/2″ Caldera 8 1/2″ Carson DFR5PC 8 1/2″ Cartright 8 1/2″ LaGrange 8 1/2″ Laureldale 8 1/2″ Leeton 8 1/2″ 8 1/2″ Liberty DFF5PC Montgomery 8 1/2″ Rothshire 8 1/2″ Selena DFF5PC 8 1/2″ Shiloh DFF5PC 8 1/2″ Sterling DFR5PC 8 1/2″ Sullivan DFR5PC 8 1/2″ Sumner DFF5PC 8 1/2″ Drawer sizes are representative of a 9″ wide base cabinet. 2014 . DRAWER FRONT HEIGHT 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ 6 1/4″ PANEL FLAT WIDTH 3 5/8″ 3 1/2″ 1 7/8″ 2 1/2″ 4″ 2 1/2″ 1 5/8″ 1 7/8″ 3 1/2″ 3 1/2″ 4 1/4″ 4″ 4″ 3 1/2″ 3 1/2″ 2 1/8″ 2 3/8″ 1 1/4″ 2 1/2″ PANEL FLAT HEIGHT 1 3/8″ 1 1/4″ 2 5/8″ 1 3/4″ 1 3/4″ 1 3/4″ 1 1/8″ 2 5/8″ 1 1/4″ 1 1/4″ 2″ 3 1/4″ 3 1/4″ 1 1/4″ 1 1/4″ 2 1/8″ 1 1/8″ 1″ 1 3/4″ Effective March 17. CABINET DIMENSIONS 29″ HIGH DESK CABINETS 11/2” Thick Countertop 1 1 /2 ” DDO/DFD 23 /4 ” 41/2” 2” 241/2” 29” 4 1 /2 ” 3” 211/2” 79 211/2” 71/2” 1 1 /2 ” 4 1 /2 ” PRB/DDFD 4 1 /2 ” UCD has 1” Top and Bottom Rail. 2014 CABINET DIMENSIONS 2” 32” 4 1/2” 4 1/2” 4 1/2” . 15” CPU DDR UCD TOEKICK AREA TOEKICK AREA TOEKICK AREA TOEKICK AREA 32″ HIGH VANITY CABINETS VU 1 1/2” 24 1/2” 3 1/2” 1 1/2” THICK COUNTERTOP 1 1/2” 20 1/2” VB & VSB VSD VDB V 2VSD 3 1/2” 24 1/2” 27 1/2” 18” 7 1/2” TOEKICK AREA 2” 7 1/2” 24 1/2” 24 1/2” 18” 3” 3” 1 1/2” 4 1/2” 2” 2” 7 1/2” 4 1/2” 7 1/2” TOEKICK AREA TOEKICK AREA TOEKICK AREA TOEKICK AREA TOEKICK AREA 34 1/2″ HIGH VANITY CABINETS LC/LCRH 1 1 /2 ” 461/2” 11/2” Thick Countertop 1 1 /2 ” VSD VB/VSB 341/2” 30” 27” 87/8” 85 / 8 ” 11 / 2 ” 4 1 /2 ” TOEKICK AREA TOEKICK AREA 2” 8 7 /8 ” 3” 201/2” 3” 4 1/2” 2” 2” 2” 2VSD 41 /2 ” 41/2” 4 1 /2 ” V VDB 27” 3” 27” 201/2” 85/8” TOEKICK AREA TOEKICK AREA TOEKICK AREA TOEKICK AREA Effective March 17. Cabinet height is 43/4”. Adding a veneer finished end (FB) will age uniformly with the rest of the kitchen. Finish Variations (Glazes are ‘‘consistently inconsistent’’). Birdseye Dots. MISCELLANEOUS Order full size touch-up kit (mini touch-up kit included with standard sink base). Include refrigerator door hinges in overall refrigerator height when placing cabinets above it. Ensure the height between the cooktop and range hood is 24″ to meet NKBA guidelines. WOOD AND FINISH CHARACTERISTICS Review specific details with the customer: Mineral Streaks.) Verify glass insert option is available for desired cut for glass door size chosen. 2014 . Allow space between door/window trim and end cabinets for countertop and top moulding overhang. See chart on page 83 for more Logix solutions. Add increased depth on tall end panels for a built-in look for deep refrigerators. Order extra scribe. TED). Add TF696FH. VARYING HEIGHTS AND DEPTHS Also increase the depth of a wall cabinet run when you increase the height (so moulding on adjacent cabinet will kill into the side of the taller cabinet). Shimming may be required to ensure proper alignment. hairline cracks may develop at frame joints on painted frame. especially when designing with peninsula wall cabinets. decorative doors. This will allow the ends to age uniformly with the rest of the kitchen and will make it flush. Use light rail or cabinet panel edge and skin to hide. This can be achieved by installing a soffit or end panels. If you have questions. MOULDINGS Order rosettes and plinths in beaded or fluted styles to match fillers. Use outside corner moulding if a skin is exposed on the back of the island. Don’t forget to include blind corner fillers. Please be sure to install cabinets properly. Verify matching interior option has been selected for all open or glass cabinets. Doors on these cabinets must open fully for accessories to be functional. but less room over back burner. Cooking Solutions: • Wall Cookbook and Recipe Organizer • Wall Spice Rack Cabinet • Three Drawer Base Special Baking Center Storage Solutions: • SuperCabinet™ • Base Rotating Deep Bin • Pegged Dish Organizer • Wall Message Center Clean-up Center: • Trash/Recycle Basket Base CLEARANCES Add fillers between end cabinets and walls on full overlay door styles. Order toekick caps.). WED. or tall fillers when using full overlay door styles to maintain a consistent reveal. Minimum of 21″ from cooktop to upper cabinet/microwave which allows for access to large pots on back burner of cooktop. Whenever possible. as it may be required to frame around built-in microwave ovens and other built-in items. Refer to appliance manufacturer’s specs. Attach overlay fillers on top of the base. Wallboard alone is not strong enough to support the cabinets. but longer reach to microwave. Raised bars are 42″ tall. please contact your representative or customer service. Apply decorative door kit (BED. Use recess toe on sides and back or BBM8 when using multiple base cabinets to create an island. Standard Overlay 1/2″. Excessive weight should not be put on cabinets hung by themselves. Refer to appliance manufacturer’s specs. TIPS TO THE INSTALLER #10 x 2 1/2″ installation screws are furnished and packaged inside all cabinets. Grain Variations (especially Hickory and Rustic Alder).) Allow sufficient clearance (3″) on each side of accessory cabinets (such as roll-out trays. SPECIAL CONSIDERATIONS Consider V-Groove skins and/or decorative doors on exposed cabinet sides in glazed kitchen. This kit includes 1/4″ veneer skin. Verify refrigerator door has enough clearance to open beyond 90 degrees so refrigerator drawers can be utilized. (See pages 44-47 for available cut for glass/mullion door sizes. swing-out units. MATCHING INTERIOR CABINETS/GLASS OPTIONS Verify cut for glass or mullion door option is available on desired cabinet size. Use light rail and skin to hide color variation between bottom of cabinets with and without matching interior. and screws for field installation. DESIGN CHECKLIST Maintain a minimum clearance of 3″ by pulling blind corners as follows: Full Overlay: 1 1/4″. Qualify customer carefully on upper cabinet/microwave advantages/disadvantages as follows: Minimum of 18″ from cooktop to upper cabinet/above the range microwave which allows for easy access to either. Skin the sides of tall cabinets to keep adjacent base and wall cabinets out from reveal of tall cabinet. Do not place dishwashers next to diagonal front cabinet (interference) or next to a range (no countertop support).DIAMOND CABINETRY’S DESIGN CHECKLIST CONSTRUCTION OPTIONS 80 Consider exposed end options: Modify exposed cabinet ends to PE or APC. Order appliance panels. Consider base peninsula cabinets (P) are 24 1/4″ deep and require 12″ of knee space. Effective March 17. Add a filler at least 6″ wide to accommodate a decorative onlay when the filler is used as valance. ISLANDS AND PENINSULAS Consider standard height bars are 34 1/2″ tall and require 19″ knee space. APPLIANCES Note for all consumers. Color Variations/Darkening (especially Natural/Light Cherry). Verify correct amount of crown moulding has been ordered. etc. wall. Apply 1/4″ veneer skin to hide 1/4″ reveal. Account for the additional support needed for wall cabinets with a depth of 18″ or greater. Use back panels/doors to flush non-P cabinets with P cabinets. Upgrade exposed cabinet ends with Authentic Ends (AUTHL/AUTHR) or Furniture Finished Plywood Ends (FPEB) Modification. appliances are not included with any cabinetry product. Underside of cabinets are Natural Maple or White laminate. Proper wall stud or ceiling joist installation is essential for Wall and Peninsula cabinets to support weight. LOGIX Review storage and usage needs with Customer. (More is needed in certain situations such as when adjacent to an appliance or when using oversized pulls or knobs. Verify mullion door lite grid matches customer expectations. FILLERS Place fillers toward end of run where least conspicuous if needed. cabinets should be attached to each other for additional strength. Our Warranty does not cover damage caused by improper installation. • If cooking surface is at a different countertop height than the rest of the kitchen. one near the sink and the other nearby for recycling. WALKWAY • The walkway width should be at least 36″. continued Effective March 17. MICROWAVE LANDING AREA • Provide at least 15″ above. • Include a minimum of 12″ of landing area on one side of the cooking surface and 15″ on the other. or adjacent to the handle side of a microwave oven. Each leg is measured from the center-front of the appliance/sink. SEATING CLEARANCE • 30″ high tables/counters should allow a 24″ wide by 18″ deep space for each seated diner and at least 18″ knee space.DOOR/ENTRY WASTE RECEPTACLES • Door opening should be at least 32″ wide. SEPARATING WORK CENTERS COOKING SURFACE LANDING AREA • A tall obstacle should not separate two primary work centers. COOKING SURFACE CLEARANCE • Allow 24″ between the cooking surface and a protected noncombustible surface above it. • With more than three work centers. CLEAN-UP/PREP SINK PLACEMENT • With only one sink. requiring a minimum 2′ 10″ wide door. COMBINING LANDING AREAS • If two landing areas are adjacent to one another. • Include at least 2 waste receptacles. 15″ on either side of a side-by-side refrigerator. both at the same height of the sink. • Place a fire extinguisher near the kitchen exit away from cooking equipment. COOKING SURFACE SAFETY • Do not locate cooking surface under an operable window. DOOR INTERFERENCE • Entry door should not interfere with safe appliance operation or appliance doors. AUXILIARY SINK DISTANCE BETWEEN WORK CENTERS • Provide at least 3″ of countertop frontage on one side of the auxiliary sink and 18″ on the other side. PREPARATION/WORK AREA • Include a section of countertop at least 36″ wide x 24″ deep next to the sink for a work area. but no more than 54″ above the floor. the total distance traveled should not be more than 26′ with no single leg of the triangle less than 4′ or more than 9′. each additional travel distance to another work center should be no less than 4′ or more than 9′. • At least 30″ of clearance is required between the cooking surface and an unprotected/combustible surface above it. • For safety reasons. 15″ of landing space which is no more than 48″ across from the front of the refrigerator. WORK AISLE • The work aisle should be at least 42″ for one cook and at least 48″ for multiple cooks. MICROWAVE OVEN PLACEMENT • The ideal location for the bottom of the microwave is 3″ below the principle user’s shoulder. If traffic passes behind the diner. both at the same height as the sink. Provide at least 21″ of standing space between the edge of the dishwasher and countertop frontage/appliances/cabinets which are placed at a right angle to the dishwasher. allow at least 36″ to edge past or 44″ to walk past. CLEAN-UP/PREP SINK LANDING AREA • Include at least a 24″ wide landing space on one side of the sink and 18″ on the other. • 42″ high counters should allow a 24″ wide by 12″ deep space for each seated diner and at least 12″ kneespace. COOKING SURFACE VENTILATION • A correctly sized. OVEN LANDING AREA • Include at least 15″ next to or above the oven. ducted ventilation system is recommended for all cooking surface appliances. WORK TRIANGLE TRAFFIC • Major traffic patterns should not cross through the basic work triangle. plan a 24″ landing space on one side of the sink and 3″ of countertop frontage on the other. • If a microwave/hood combination is used. locate it adjacent to or across from the cooking surface and refrigerator. the countertop should extend a minimum of 9″ behind the cooking surface if the counter height is the same height as the cooking surface. No work triangle leg should intersect an island/peninsula by more than 12″. • If all the countertop at the sink is not the same height. determine a new minimum for the two by taking the longer of the two and adding 12″. then the 12″ and 15″ landing areas must be the same height as the cooking surface. • 36″ high counters should allow a 24″ wide by 15″ deep space for each seated diner and at least 15″ kneespace. • A 15″ landing area that is not more than 48″ away is also acceptable as long as the oven does not open into a walkway. Minimum exhaust rate for a ducted hood is 100 CFM and must be ducted to the outside. below. 2014 NKBA GUIDELINES kitchen planning guidelines NKBA GUIDELINES . in an island or peninsula situation. • With three work centers. then the manufacturer’s specifications should be followed. • Code requires that the manufacturer’s specifications be followed. TRAFFIC CLEARANCE AT SEATING • Allow 32″ of clearance from the table to wall/obstacle if no traffic passes behind a seated diner. • Window treatments above cooking surface should not use flammable materials. A properly recessed tall corner unit is acceptable. • Make-up air may need to be provided. DISHWASHER PLACEMENT • Nearest edge of dishwasher should be within 36″ of nearest edge of sink. The recommended minimum is 150 CFM. Refer to local codes. and 15″ above or adjacent to any under-counter style refrigerator. 81 REFRIGERATOR LANDING AREA • Include at least 15″ of landing area on the handle side of the refrigerator. CLEAR SPACE • Plan a clear space of 30″ from the front edge of all fixtures to any opposite bath fixture. Sizes: Wall Base Drawer Pantry Misc. DOUBLE LAVATORY PLACEMENT • The distance between the centerlines of two lavatories should be at least 36″. and storage areas. At least one wall switch-controlled light must be placed at the entrance. or obstacle. for a medium kitchen (151 to 350 square feet) is 1700″. per square foot. A shower or tub with a shower head shall have a minimum floor to ceiling height of 80″ above a minimum area 30″ x 30″ at the shower head. bath linens. Load bearing floors and shelves meet KCMA standards of 15 lbs. • GFCI (Ground-Fault-Circuit-Interrupter) protection is required on all receptacles servicing countertop surfaces within the kitchen. equal to at least 8% of the total square footage of the kitchen. visit http://www. requiring a minimum 2′ 10″ wide door. • Doorway opening should be at least 32″. STORAGE AT CLEAN-UP/PREP SINK • The recommended total for a small kitchen is 400″. and should be located within 72″ of the centerline of the main clean-up/prep sink. rather than sharp edges. is required. STORAGE • Provide adequate. with a 24″ minimum space in front of a shower entry. The minimum distance required between a wall and the edge of a lavatory is 4″. • Storage of frequently used items should be 15″ to 48″ above floor. wall. work. are recommended on all counters. base. a medium kitchen is 480″. a large kitchen is 560″. accessible storage for toiletries. STORAGE CEILING HEIGHT • The recommended total shelf/drawer frontage for a small kitchen (less than 150 square feet) is 1400″. • A minimum space of at least 21″ is required in front of a lavatory.NKBA GUIDELINES kitchen planning guidelines (continued) bathroom planning guidelines COUNTERTOP SPACE DOOR/ENTRY • A total of 158″ of countertop frontage. • The minimum distance required between the edges of two lavatories is 4″. To view a complete and updated list of the NKBA Guidelines. The minimum interior shower size required is 30″ x 30″. or a total living space which includes a kitchen. 24″ deep. LAVATORY/VANITY HEIGHT • The height for a lavatory varies from 32″ to 43″ to fit the user. Warranty does not cover overloading beyond this point. and for a large kitchen (greater than 350 square feet) is 2000″. • The minimum distance required is 30″. SINGLE LAVATORY PLACEMENT • The distance from the centerline of the lavatory to the sidewall/tall obstacle should be at least 20″. • Window/skylight area. • Every work surface should be well illuminated. SHOWER SIZE • The interior shower size should be at least 36″ x 36″. 2014 .aspx © Copyright 2010 National Kitchen & Bath Association Effective March 17. toilet. rather than sharp edges. CORNER CABINET STORAGE • At least one corner cabinet should include a functional storage device. DOOR INTERFERENCE COUNTERTOP EDGES 82 • Clipped or round corners.org/guidelines/default.nkba. bidet. • The minimum distance required is 15″. with at least 15″ clearance above is needed to accommodate all landing. drawer. are recommended on all counters. preparation. ELECTRICAL RECEPTACLES • Bathroom floor to ceiling minimum height is 80″. COUNTERTOP EDGES LIGHTING • Clipped or round corners. ELECTRICAL RECEPTACLES NKBA GUIDELINES • All GFCI receptacles should be located at electrical appliance points of use. and tub. and pantry shelf/drawer frontage can be adjusted upward or downward as long as the recommended total stays the same. S 300″ 520″ 360″ 180″ 40″ M 360″ 615″ 400″ 230″ 95″ L 360″ 660″ 525″ 310″ 145″ • The totals for wall. • The door area should include clear floor space for maneuvering which varies according to the type of door and the direction of the approach. grooming and general bathroom supplies. PRS. SR SuperCabinet™ Version 2 BV2SC36PRP. STCM. SR SuperCabinet™ BSC36PRP. Fluted) WCRO2130 Wall Cookbook & Recipe Organizer WEAS_ _ _ _ Wall Easy Access Storage Cabinets WMC_ _ _ _ Wall Message Center WSC_ _ _ _ _ _ Wine Storage Cabinet WSP_ _ _ _ Wall Spice Pull-Outs WSR_ _ _ _ Wall Spice Rack Cabinets 3″ 6″ 9″ 12″ 15″ 18″ 21″ 24″ 27″ 30″ 33″ 36″ 39″ 42″ 45″ 48″ • • 147 • • 106. SCM. SRP. R. 2014 LOGIX REFERENCE CHART B_ _CIW B_ _FHMIX .LOGIX™ REFERENCE CHART Wall Cabinets Description W18_ _SPD Wall Spice Pull Down W2D_ _ _ _TI Wall Two Drawer Cabinet w/Tiered Insert W36_ _SHLFPD Wall Shelf Pull Down WBCPO_30. OL Base Box Column Pull-Outs (Plain. RS. 108. Overlay. 109 • • Page 148 • 146 • • • • • 143 • • 106 • 156 • • • • 153 • 147 • • 149 Hearths HPP9_ _21 Hearth Pier w/Pull-Out • 168 83 Base Cabinets 2DB_ _RT Two Drawer Bases w/Roll Tray • 217 2DB36PDO Two Drawer Base w/Pegged Dish Organizer • • • • • 216 2DB36RTPDO Two Drawer Base w/Roll Tray & Pegged Dish Organizer • 217 3DB_ _DD Three Drawer Bases w/Deep Drawer 3DB_ _SP Three Drawer Base Special • • 3DB_ _WTCD Three Drawer Bases w/Wood Tiered Cutlery Divider Drawer • • 3DBB_ _DD Three Drawer Base Buffet w/Deep Drawer • • • • • • 220 • • 219 • 219 • • • 220 4DB_ _CIW Four Drawer Bases w/Cutlery Insert Wood Organizer • • • • 221 4DB_ _WTCD Four Drawer Bases w/Wood Tiered Cutlery Divider Drawer • • • • 222 • 173 Bases w/Cutlery Insert Wood Organizer Base Cabinets w/Mixer Shelf B_ _FHRTLO Bases w/Lid Organizer & Roll Tray B_ _PS Pots & Pans Organizer Bases w/Drawer B_ _RTCIW Bases w/Cutlery Insert Wood Organizer & Roll Tray B_ _RTLO Bases w/Drawer & Lid Organizer & Roll Tray B_ _RTWTCD Bases w/Wood Tiered Cutlery Divider Drawer & Roll Tray B_ _TDRO Bases with Roll-Out Tray Divider B_ _WTCD Bases w/Wood Tiered Cutlery Divider Drawer BBCPO_. SRS SuperCabinet™ Version 2 BWB_ _ Base Wastebaskets • • • BWB_ _FH Base Wastebaskets Full Height • • • CNTYSB_ _CM Country Sink Base w/CabMat™ LSP36 RRC36. RP. 193. Fluted) BC_ _PO Base Corners w/Pull-Out BCC_ _ Base Cooking Centers BCFW_ _PO Base Corners Full Width w/Pull-Out BCFW48CPO • • • • • • 190 • • • 187 • 188 • • • • • • • 186 186 • • • 173 • • 187 • • • • • • • • 189 • 227 • • • • 206 Base Corner Full Width w/Curved Pull-Out • 206 BCFW48SP Base Cabinet Full Width w/Roll Trays & Swing-Out • BEAS_ _ Base Easy Access Storage Cabinets BMC24 Base Message Center BPP_ _ Base Pantry Pull-Outs • • • 222 • 206 177 • • 205 227 • 226 BPPP_ _ Base Pots & Pans Pull-Outs BRC27 Base Recycling Center • • BRDB36 Base Rotating Deep Bin BSC30PR. FF. 181 179 • 181 223 223 • 203 Lazy Susan Pull-Out • 213 Recycling Trash Cabinets • 224 191. RRC36DR 178 • 180 • 179. SRS SuperCabinet™ BSCG_ _ SuperCabinet™ Gourmet • • 188 • 223 • 212 • BV2SC30PR. 195. 197 SB_ _CM. Overlay. STSCM Sink Base w/CabMat™ SB_ _D Sink Bases w/Drawers Below SB_ _S • • • • • • • • Sink Base SuperCabinet™ • • • 195 SB_ _STS Sink Base SuperCabinet™ w/Tilt Downs • • • 196 SB36CDY Sink Base w/Caddy • 192 SB36SCDY Sink Base SuperCabinet™ w/Caddy • 196 SB36STCDY Sink Base w/Tilt Downs & Caddy • 194 SB36STSCDY Sink Base SuperCabinet™ w/Tilt Downs & Caddy • 197 SLSCR_ _ Super Lazy Susans w/Chrome Rail • • 210 SLSCR_ _ _ _ Asymmetrical Super Lazy Susans w/Chrome Rail • • 212 SSS36 Segmented Super Lazy Susan • 209 • Available widths • • • • • • 200 continued Effective March 17. OL Wall Box Column Pull-Outs (Plain. RS. PRS. RP. SRP. FF. 257 • • 255 255 • • Page • • • 253. 332 VSSB_ _3421ST Vanity Sink Base SuperCabinet™ w/Tilt Downs • • • 333 VSSB_ _3421STWB Vanity Sink Base SuperCabinet™ w/Tilt Downs and Wastebasket • • • 332 • • • 42 Modifications DRWTK Toekick Drawer • • • • LOGIX REFERENCE CHART • Available widths Effective March 17. 254 • 247-250 • 251 • 252 Vanity Cabinets LC188421 Linen Closet • LCRH188421 Linen Closet w/Removable Hamper • VCC_ _3421FP Vanity Cosmetic Center Sink Drawer Bases w/False Panel VCCB183421 Vanity Cosmetic Center Base • VCCDB183421 Vanity Cosmetic Center Drawer Base • VP93421 Vanity Pull-Out VSB_ _3421WB Vanity Sink Bases w/Wastebasket VSB30_ _21U Vanity Sink Bases w/U-Shaped Roll-Out Tray 352 353 • • 345 335 337 • 338 • • 332 • 331. 2014 . 24 Utility Easy Access UOC24_ _6 Utility Organizer Cabinet UOCDZ24_ _9 Utility Organizer Drop Zone Cabinet US21_ _24 Utility Storage w/Pantry Pull-Out • 258 US21_ _24PP Utility Storage w/Pantry Pull-Out & Pot and Pan Rack • 258 • • • • 259. 260 256.LOGIX™ REFERENCE CHART 84 Tall Cabinets Description PTU_ _ _ _24 Pantry Top Units 3″ 6″ 9″ 12″ 15″ 18″ 21″ 24″ 27″ 30″ 33″ 36″ 39″ 42″ 45″ 48″ • • PTUP_ _4924 Pantry Top Units w/Pull-Out • • PY_ _ _ _24 Pantry Units TPP_ _ _ _24 Tall Pantry Pull-Outs • • UDZ_ _ _ _24 Utility Drop Zone Cabinet UEAS_ _ _ _12. CG.BTM. Straight APC 3/4X PE All Plywood Construction Dovetail Drawer Undermount Plywood Ends ALF Aluminum Frame Frost Doors CG. Model WALL SINGLE DOOR. Available Standard on these cabinets Logix Organization Cabinet Cabinet Depth 5 Day Express Response Item Cabinet Width Cabinet Height CONSTRUCTION UPGRADES CUSTOM MODIFICATIONS DECORATIVE DOOR OPTIONS Mod. ADDTK* AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND Add Toekick Authentic End . Description Mod.TOP Decorative Door Options PE ALF CG • •† • CG.BTM MD.Right Furniture Finished Plywood Ends ID INVFRM MIP P RD TD TVRAV TVRFV TVRVV Increased Depth Inverted Frame Matching Interior Plywood Peninsula Reduced Depth Tray Dividers Valance Top Rail.9 W1812 L or R 2.Left Extended Stile .WALL CABINET NOMENCLATURE MODIFICATIONS GRID KEY • STD { { Cabinet Type { { All Wall Cabinets are 12″ deep unless otherwise noted.Left Authentic End .TOP Mullion Doors FPEB *ADDTK available with compatible toekick modifications. CG. with Drawer EXB EXL EXR FB FFDL Extended Stiles . See the Modification/Upgrade Compatibility Chart on page 28 for details.TOP † Not available on 12″ wide WALL CABINETS FFDR Description Effective March 17. Description Mod.Right Finished Ends Face Frame and Door on End .Right Cabinet Box Only Cabinet Case Only Cabinet Front Only Cabinet False Panel Cabinet Frame Only Cabinet with No Door.5 W1512 L or R 1.Both Extended Stile . MD. Arch Valance Top Rail. Furniture Valance Top Rail. Description Mod.TOP Cut for Glass Doors MD. MD.BTM.BTM CG.Left Face Frame and Door on End . Description Mod. 12″ HIGH 12” 12” 85 Cubic Feet W1212 L or R 1. 2014 .2 Custom Modifications AUTHL ADDTK AUTHR • FB CBO • FFDL FFDR • • 3/4X CFNTO • • FPEB ID • • Construction Upgrades APC CCO INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. • Art Glass not available.4 W3912 4.3 W4812 5. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors.7 12” 12” 12” • Addison W2112 and W4212 door panels feature a unique raised profile due to the narrow panel width.BTM CG. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • CFP FPEB ID • • CFRMO CND • INVFRM MIP P • RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.8 W4212 5. 12″ HIGH 12” 12” NEW 12” 86 NEW Model Cubic Feet W2112 2.4 W3712 4.6 W2412 3.0 W2712 3.WALL DOUBLE DOOR.BTM CG.1 W3412 4.1 W4512 5.TOP • • WTH3012 3.BTM MD. • Depth can be reduced to a minimum of 9″. • 42″ or wider will feature four doors. 12″ HIGH 30” or 36” 12” 12” CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.7 W3312 4.4 • Utilizes doors from 30″ and 36″ high wall cabinets.TOP WALL CABINETS • 3/4X CFNTO • Construction Upgrades APC CCO Effective March 17.TOP • Decorative Door Options PE ALF CG • • • CG.3 W3012 3. • Lid stay tension can be field adjusted.BTM MD. door will be Square. Custom Modifications AUTHL ADDTK AUTHR • FB CBO • FFDL FFDR • CCO CFNTO • • FPEB ID • • 3/4X • WALL TOP HINGE SINGLE DOOR.7 WTH3612 4. • Not available on Cartright or Liberty door styles. • When ordered in Arch/Cathedral door styles.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP ALF PE CG CG. 2014 .0 W3612 4. per square foot of load bearing surface.Model WALL REFRIGERATOR DOUBLE DOOR. • When ordered in Arch/Cathedral door styles. • Load limit is 15 lbs. and into adjacent cabinets.TOP • ALF CG CG.8 W331224 7. Custom Modifications AUTHL ADDTK AUTHR • FB CBO • FFDL FFDR FPEB • CCO CFNTO • • ID 3/4X 30” or 36” 12” 24” • MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. • Depth can be reduced to a minimum of 9″. 12″ HIGH. • Lid stay tension can be field adjusted.7 W421224 9. Load limit is 15 lbs.5 12” 87 24” 12” • • • • 24” 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit.4 W341224 7.8 WTH361224 8.BTM MD. 2014 . per square foot of load bearing surface. door will be Square. 24″ DEEP CND Decorative Door Options PE • CFRMO • Construction Upgrades APC INVFRM • CFP Effective March 17.0 W391224 8. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • • CFNTO FPEB ID CFRMO CND • INVFRM • 3/4X CFP • Construction Upgrades APC CCO MIP P • RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.TOP • Decorative Door Options PE ALF CG • • • CG.3 W361224 8. 12″ HIGH.BTM MD.BTM CG. and into adjacent cabinets.1 W371224 8.9 W481224 10.5 W301224 6.1 • Utilizes doors from 30″ and 36″ high wall cabinets.TOP • • WTH301224 6. 24″ DEEP 12” NEW 24” NEW Cubic Feet W241224 5. • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit.4 W451224 9. 42″ or wider will feature four doors.TOP WALL CABINETS WALL TOP HINGE REFRIGERATOR SINGLE DOOR. • Not available on Cartright or Liberty door styles.BTM CG. • Art Glass not available. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. Addison W421224 door panels feature a unique raised profile due to the narrow panel width. • 42″ or wider will feature four doors.BTM CG.9 W3415 4. Custom Modifications AUTHL ADDTK AUTHR • FB CBO • FFDL FFDR • • • ID • • PE • INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 15″ HIGH 15” 12” NEW 15” NEW W2115 3.4 W3715 5.9 W3615 5.9 12” 15” 12” • Addison W2115 and W4215 door panels feature a unique raised profile due to the narrow panel width.BTM MD.6 W2715 4.0 W3015 4.8 W4215 6.BTM CG.TOP • WALL CABINETS • 3/4X CFNTO FPEB Construction Upgrades APC CCO Effective March 17.5 W3315 4.5 W4815 6.3 W1815 L or R 2. 15″ HIGH 15” Cubic Feet W1215 L or R 1.BTM MD.3 W3915 5.TOP Decorative Door Options ALF CG CG. 2014 .2 W2415 3.Model WALL SINGLE DOOR.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP PE ALF CG • •† • CG.7 Custom Modifications 12” AUTHL ADDTK AUTHR • 88 FB CBO • FFDL FFDR • CCO CFNTO • • FPEB ID • • 3/4X • CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.TOP † Not available on 12″ wide WALL DOUBLE DOOR.8 W1515 L or R 2.1 W4515 6. 0 W361524 9.Model WALL TOP HINGE SINGLE DOOR. 15″ HIGH 30” or 36” Cubic Feet WTH3015 4.TOP 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit. 15” 12” Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • CCO 3/4X • WALL REFRIGERATOR DOUBLE DOOR. Custom Modifications AUTHL ADDTK AUTHR • FB CBO • FFDL FFDR • FPEB • CFNTO • • ID INVFRM • Construction Upgrades APC CCO 3/4X PE • CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.7 W391524 10.8 W371524 9. • Not available on Cartright or Liberty door styles. • When ordered in Arch/Cathedral door styles.1 W341524 9. 2014 .TOP Decorative Door Options ALF CG CG. 15″ HIGH. 42″ or wider will feature four doors.3 W331524 9. door will be Square.TOP • WALL CABINETS 15” CFP • Construction Upgrades APC CFNTO Effective March 17. Load limit is 15 lbs.BTM MD.BTM CG.7 W301524 8.BTM MD. • Lid stay tension can be field adjusted. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors.0 W481524 12.5 WTH3615 5.BTM CG. per square foot of load bearing surface. 24″ DEEP FPEB ID • • NEW 24” NEW 15” 24” 15” 24” • • • • CFRMO CND • INVFRM MIP P RD • EXB 89 EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. • Art Glass not available.8 CG.4 • Utilizes doors from 30″ and 36″ high wall cabinets.6 W421524 11. and into adjacent cabinets.3 W451524 12. • Depth can be reduced to a minimum of 9″. Addison W421524 door panels feature a unique raised profile due to the narrow panel width.TOP • Decorative Door Options PE ALF CG • • • W241524 6. TOP CFRMO EXB P RD • • Decorative Door Options Construction Upgrades APC CFNTO PE ALF CG • • • W1218 L or R 2.3 Custom Modifications AUTHL ADDTK AUTHR • CBO • CCO CFNTO • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC • 3/4X INVFRM CFP CND • EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • • Decorative Door Options ALF PE CG • • CG.3 WTH361524 9. and 24″ wide Effective March 17.Model WALL TOP HINGE REFRIGERATOR SINGLE DOOR. • Load limit is 15 lbs.TOP MD MD.TOP MD MD. • Depth can be reduced to a minimum of 9″.BTM CG. per square foot of load bearing surface.2 W2118 L or R 3.8 • Utilizes doors from 30″ and 36″ high wall cabinets. door will be Square.BTM MD. 18″ HIGH 18” 12” CFRMO CND • INVFRM • 3/4X CFP • MIP EXB EXL EXR • • TD TVRAV TVRFV TVRVV CG. 21″.2 W1518 L or R 2. • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit. and into adjacent cabinets.TOP •† † WALL CABINETS Not available on 12″. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. 24″ DEEP 30” or 36” 15” 24” 90 Cubic Feet WTH301524 8. • Art Glass not available. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • CCO FPEB ID • WALL SINGLE DOOR.BTM CG. 15″ HIGH. 2014 .BTM MD.8 W2418 L or R 4. • Lid stay tension can be field adjusted.7 W1818 L or R 3. • Not available on Cartright or Liberty door styles. • When ordered in Arch/Cathedral door styles. 8 W4218 7.3 • Utilizes doors from 30″ and 36″ high wall cabinets. • Not available on Cartright or Liberty door styles.3 W3718 6.3 W3318 5.TOP MD MD.BTM MD.4 W3418 5.8 W3618 6.6 W4818CS 8.3 W4518 7.3 91 12” Custom Modifications AUTHL ADDTK AUTHR • CBO • CCO CFNTO • • FB FFDL FFDR FPEB ID • • • • CFP CFRMO CND • INVFRM EXB EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • •* *Not available on 39″. 2014 .TOP • Decorative Door Options PE ALF CG • • • CG. • When ordered in Arch/Cathedral door styles. • Lid stay tension can be field adjusted. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors.3 W4818 8.TOP •† • • † Available only on 30″ and 36″ wide 30” or 36” 18” 12” WTH3018 5.BTM CG.8 W3018 5. 18″ HIGH Effective March 17.WALL DOUBLE DOOR. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • • 3/4X CFNTO CFP • FPEB ID • • Construction Upgrades APC CCO CFRMO CND • INVFRM MIP P • RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 42″. and 48″ wide Decorative Door Options Construction Upgrades APC 3/4X • ALF PE CG CG. • Art Glass not available.TOP WALL CABINETS WALL TOP HINGE SINGLE DOOR. door will be Square.3 W2718 4. • Depth can be reduced to a minimum of 9″. 45″.3 W3918 6.BTM MD.3 WTH3618 6.BTM CG. 18″ HIGH 18” 12” NEW NEW 18” 12” 18” Model Cubic Feet W2418 4. 42″. door will be Square.BTM MD. • Not available on Cartright or Liberty door styles. 2014 . A 18” Cubic Feet Custom Modifications Partial Overlay 16 1/16″ 18 1/16″ AUTHL ADDTK AUTHR CBO • FB FFDL FFDR CCO FPEB ID • • 3/4X • 18” 24” NEW 18” NEW CND • INVFRM MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.BTM MD.8 W241824 7.2 W481824 15. per square foot of load bearing surface.4 W451824 14. and into adjacent cabinets. 18” Custom Modifications 24” AUTHL ADDTK AUTHR • CBO • FB FFDL FFDR FPEB • • • CCO CFNTO • • ID INVFRM CFP CFRMO CND • MIP P • EXB EXL EXR • • RD TD TVRAV TVRFV TVRVV • •* *Not available on 39″.8 W301824 9.TOP 24” • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit. and 48″ wide Construction Upgrades WALL CABINETS APC • 3/4X Decorative Door Options ALF PE CG CG.1 W481824CS 15.7 W331824 10. • Art Glass not available.5 W391824 12. 12″ DEEP NEW 30” or 36” 69/16” B 12” 71/32” 92 A B Full Overlay 16 13/16″ 17 5/16″ WVL3018 5.TOP • PE ALF CG • • • W241824 L or R 7.2 WVL3618 6. • When ordered in Arch/Cathedral door styles.6 W421824 13.6 W371824 11. 18″ HIGH. • See side view drawing for required clearances. • Lift mechanism features a single motion for up and out movement with Smart Stop.TOP •† † Available only on 30″ and 36″ wide Effective March 17.BTM CG. 24″ DEEP CFP • • APC CFNTO CG.2 24” 18” CFRMO Decorative Door Options Construction Upgrades WALL REFRIGERATOR DOUBLE DOOR.1 • Utilizes doors from 30″ and 36″ high wall cabinets. • Lift mechanisms and mounting brackets will be visible if used with transparent textured glass. • Decorative hardware required.TOP • • MD MD.BTM CG.6 W361824 11. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors.6 W341824 10.Model WALL VERTICAL LIFT. tension can be field adjusted. • Load limit is 15 lbs. 45″. 18″ HIGH. 18” 24” 93 Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR CCO FPEB ID WALL VERTICAL LIFT. 24″ DEEP 30” or 36” Cubic Feet WTH301824 9. 18″ HIGH. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • • CFNTO FPEB ID CFRMO CND • INVFRM • 3/4X CFP • Construction Upgrades APC CCO MIP P • RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. tension can be field adjusted. • Depth can be reduced to a minimum of 12″. • Load limit is 15 lbs.7 WTH361824 10.TOP • Decorative Door Options PE ALF CG • • • CG. door will be Square. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. • Not available on Cartright or Liberty door styles.BTM CG.TOP WALL CABINETS NEW CND • Construction Upgrades • CFRMO • • 3/4X CFP • • APC CFNTO Effective March 17. • Not available on Cartright or Liberty door styles. 2014 . 24″ DEEP 30” or 36” A 18” 69/16” 24” B 71/32” A B Full Overlay 16 13/16″ 17 5/16″ Partial Overlay 16 1/16″ 18 1/16″ INVFRM MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.TOP • Decorative Door Options PE ALF CG • • • WVL301824 9.4 WVL361824 11. • Art Glass not available. • Decorative hardware required. • When ordered in Arch/Cathedral door styles. • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit.BTM CG. • Lid stay tension can be field adjusted.BTM MD.BTM MD. per square foot of load bearing surface. • Lift mechanisms and mounting brackets will be visible if used with transparent textured glass.2 CG. door will be Square. and into adjacent cabinets. • Lift mechanism features a single motion for up and out movement with Smart Stop.6 • Utilizes doors from 30″ and 36″ high wall cabinets. • Depth can be reduced to a minimum of 9″. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. • Art Glass not available. • See side view drawing for required clearances. • When ordered in Arch/Cathedral door styles. 18″ HIGH.TOP • Utilizes doors from 30″ and 36″ high wall cabinets.Model WALL TOP HINGE REFRIGERATOR SINGLE DOOR. Model Cubic Feet WALL SINGLE DOOR, 21″ HIGH W1221 L or R 2.7 12”, 15”, 18”, 21”, or 24” W1521 L or R 3.3 W1821 L or R 3.8 W2121 L or R 4.4 W2421 L or R 5.0 21” 12” Custom Modifications AUTHL ADDTK AUTHR 94 • CBO • CCO CFNTO • • FB FFDL FFDR FPEB ID • • • • 3/4X • INVFRM P RD TD • • ALF PE CG 5.6 W3021 5.6 W3321 6.7 W3421 6.7 W3621 7.2 W3721 7.3 W3921 7.8 W4221 8.5 W4521 8.8 W4821CS 9.7 W4821 9.7 21” 12” 48” 21” CG.BTM CG.TOP MD CFRMO EXB MD.BTM MD.TOP • • W2721 NEW • TVRAV TVRFV TVRVV • 24”, 27”, 30”, 33”, 34”, 36”, or 37” 39”, 42”, 45”, or 48” EXL EXR • • 5.0 NEW EXB MIP W2421 12” CND • WALL DOUBLE DOOR, 21″ HIGH 21” CFRMO Decorative Door Options Construction Upgrades APC CFP Custom Modifications 12” AUTHL ADDTK AUTHR • CBO • CCO CFNTO • • FB FFDL FFDR FPEB ID • • • • INVFRM CFP CND • EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • •* *Not available on 39″, 42″, 45″, and 48″ wide Construction Upgrades APC PE • Decorative Door Options ALF CG CG.BTM CG.TOP MD MD.BTM MD.TOP • WALL CABINETS • 3/4X Effective March 17, 2014 Model WALL TOP HINGE SINGLE DOOR, 21″ HIGH 30” or 36” Cubic Feet WTH3021 5.6 WTH3621 7.2 • Utilizes doors from 30″ and 36″ high wall cabinets. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. • Not available on Cartright or Liberty door styles. • When ordered in Arch/Cathedral door styles, door will be Square. • Art Glass not available. • Heavy duty lid stay hinge will be installed on the left side of the cabinet. • Lid stay tension can be field adjusted. • Depth can be reduced to a minimum of 9″. 21” 12” Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • CCO FPEB ID • • 3/4X • WALL VERTICAL LIFT, 21″ HIGH, 12″ DEEP A 30” or 36” 69/16” 21” B 12” 71/32” A B Full Overlay 16 13/16″ 17 5/16″ Partial Overlay 16 1/16″ 18 1/16″ CFRMO CND • INVFRM MIP P RD • EXB • • TD TVRAV TVRFV TVRVV MD MD.BTM MD.TOP • PE ALF CG • • • WVL3021 5.9 WVL3621 7.1 CG.BTM CG.TOP • Utilizes doors from 30″ and 36″ high wall cabinets. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. • Decorative hardware required. • See side view drawing for required clearances. • Lift mechanism features a single motion for up and out movement with Smart Stop, tension can be field adjusted. • Lift mechanisms and mounting brackets will be visible if used with transparent textured glass. • Art Glass not available. • Not available on Cartright or Liberty door styles. • When ordered in Arch/Cathedral door styles, door will be Square. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • • 3/4X CFNTO CFP • FPEB ID • • Construction Upgrades APC CCO CFRMO CND • INVFRM MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.BTM MD.TOP • Decorative Door Options PE ALF CG • • • CG.BTM CG.TOP WALL CABINETS NEW CFP Decorative Door Options Construction Upgrades APC CFNTO • 95 EXL EXR Effective March 17, 2014 Model WALL REFRIGERATOR DOUBLE DOOR, 21″ HIGH, 24″ DEEP 21” 24” NEW 96 NEW Cubic Feet W242124 L or R 9.0 W242124 9.0 W302124 11.1 W332124 12.2 W342124 12.2 W362124 13.3 W372124 13.3 W392124 14.3 W422124 15.2 W452124 16.3 W482124CS 17.3 W482124 17.3 21” 24” 21” 24” • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit, and into adjacent cabinets. • Load limit is 15 lbs. per square foot of load bearing surface. 48” Custom Modifications AUTHL ADDTK AUTHR 21” • 24” CBO • FB FFDL FFDR FPEB • • • CCO CFNTO • • ID CFP CFRMO CND • INVFRM MIP P • EXB EXL EXR • • RD TD TVRAV TVRFV TVRVV • •* *Not available on 39″, 42″, 45″, and 48″ wide Decorative Door Options Construction Upgrades APC 3/4X • WALL TOP HINGE REFRIGERATOR SINGLE DOOR, 21″ HIGH, 24″ DEEP 30” or 36” 21” 24” ALF PE CG CG.BTM CG.TOP MD MD.BTM MD.TOP • • WTH302124 11.1 WTH362124 13.3 • Utilizes doors from 30″ and 36″ high wall cabinets. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. • Not available on Cartright or Liberty door styles. • When ordered in Arch/Cathedral door styles, door will be Square. • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit, and into adjacent cabinets. • Load limit is 15 lbs. per square foot of load bearing surface. • Art Glass not available. • Heavy duty lid stay hinge will be installed on the left side of the cabinet. • Lid stay tension can be field adjusted. • Depth can be reduced to a minimum of 9″. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR • WALL CABINETS • CFNTO FPEB ID CFRMO CND • INVFRM • 3/4X CFP • Construction Upgrades APC CCO MIP P • RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.BTM MD.TOP • Decorative Door Options PE ALF CG • • • CG.BTM CG.TOP Effective March 17, 2014 Model WALL VERTICAL LIFT, 21″ HIGH, 24″ DEEP 30” or 36” A 21” 69/16” B 24” 71/32” A B Full Overlay 16 13/16″ 17 5/16″ Partial Overlay 16 1/16″ 18 1/16″ WVL302124 10.9 WVL362124 12.9 • Utilizes doors from 30″ and 36″ high wall cabinets. Grain on center panels and slab doors will run horizontally and door rail configuration on non-miter doors will be unique from adjacent cabinet doors. • Decorative hardware required. • See side view drawing for required clearances. • Lift mechanism features a single motion for up and out movement with Smart Stop, tension can be field adjusted. • Lift mechanisms and mounting brackets will be visible if used with transparent textured glass. • Art Glass not available. • Not available on Cartright or Liberty door styles. • When ordered in Arch/Cathedral door styles, door will be Square. • Depth can be reduced to a minimum of 12″. Custom Modifications AUTHL ADDTK AUTHR CBO • CCO FFDL FFDR FPEB ID • • • • • WALL SINGLE DOOR, 23 1/2″ HIGH 12”, 15”, 18”, 21”, or 24” 231/2” 12” CFRMO CND • INVFRM MIP EXB EXL EXR • • TD TVRAV TVRFV TVRVV CG.BTM CG.TOP MD MD.BTM MD.TOP CFRMO EXB P RD • • Decorative Door Options Construction Upgrades 3/4X CFP • FB APC CFNTO 97 PE ALF CG • • • W1224 L or R 3.0 W1524 L or R 3.6 W1824 L or R 4.2 W2124 L or R 4.3 W2424 L or R 5.5 Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC • 3/4X PE • INVFRM CFP CND • EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • • Decorative Door Options ALF CG CG.BTM CG.TOP MD MD.BTM MD.TOP • WALL CABINETS NEW Cubic Feet Effective March 17, 2014 WALL DOUBLE DOOR, 23 1/2″ HIGH 231/2” 12” NEW NEW 98 Model Cubic Feet W2424 5.5 W2724 6.1 W3024 6.8 W3324 7.4 W3424 7.6 W3624 8.0 W3724 8.2 W3924 8.6 W4224 9.3 W4524 9.9 W4824CS 10.5 W4824 10.5 23 /2” 1 12” 231/2” 12” • If a 6″ high accessory cabinet (ex. Wall Wine Cubby, Wall Organizer or Wall Spice Drawer) is installed beneath a 23 1/2″ high wall cabinet, a 1/2″ filler is recommended between the 2 cabinets if installed adjacent to a 30″ high wall cabinet. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • INVFRM CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • •* *Not available on 39″, 42″, 45″, and 48″ wide Construction Upgrades APC • 3/4X Decorative Door Options ALF PE CG CG.BTM CG.TOP • • MD MD.BTM MD.TOP •† † WALL CABINETS Available only on 30″ and 36″ wide Effective March 17, 2014 Model WALL REFRIGERATOR SINGLE or DOUBLE DOOR, 23 1/2″ HIGH, 24″ DEEP 24” 231/2” NEW 24” NEW Cubic Feet W242424 L or R 10.5 W242424 10.5 W302424 12.4 W332424 13.6 W342424 13.9 W362424 14.7 W372424 15.1 W392424 15.9 W422424 17.1 W452424 18.4 W482424CS 19.6 W482424 19.6 99 23 /2” 1 24” 231/2” 24” • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit, and into adjacent cabinets. • Load limit is 15 lbs. per square foot of load bearing surface. Custom Modifications AUTHL ADDTK AUTHR 231/2” • 24” • CBO CCO CFNTO • • • FB FFDL FFDR FPEB • • • ID CFP CFRMO CND • INVFRM MIP P • EXB EXL EXR • • RD TD TVRAV TVRFV TVRVV • •* *Not available on 39″, 42″, 45″, and 48″ wide Decorative Door Options Construction Upgrades APC 3/4X • ALF PE CG CG.BTM CG.TOP MD MD.BTM MD.TOP •† • • † Available only on 30″ and 36″ wide 12”, 15”, 18”, 21”, or 24” 271/2” 12” W1227 L or R 3.4 W1527 L or R 4.1 W1827 L or R 4.9 W2127 L or R 5.6 W2427 L or R 6.3 Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC • 3/4X PE • INVFRM CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • • Decorative Door Options ALF CG CG.BTM CG.TOP MD MD.BTM MD.TOP • WALL CABINETS WALL SINGLE DOOR, 27 1/2″ HIGH Effective March 17, 2014 WALL DOUBLE DOOR, 27 1/2″ HIGH 24”, 27”, 30”, 33”, 34”, 36”, or 37” 271/2” NEW 12” NEW 100 Model Cubic Feet W2427 6.3 W2727 7.1 W3027 7.8 W3327 8.5 W3427 8.5 W3627 9.3 W3727 9.2 W3927 10.0 W4227 10.7 W4527 11.0 W4827CS 12.2 W4827 12.2 39”, 42”, 45”, or 48” 271/2” 12” 48” Custom Modifications AUTHL ADDTK AUTHR 271/2” • 12” • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • CFP CFRMO CND • INVFRM EXB EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • •* *Not available on 39″, 42″, 45″, and 48″ wide Decorative Door Options Construction Upgrades APC 3/4X • WALL REFRIGERATOR DOUBLE DOOR, 27 1/2″ HIGH, 24″ DEEP 24” 271/2” NEW 24” NEW 271/2” 24” ALF PE CG CG.BTM CG.TOP MD MD.BTM MD.TOP • • W242724 L or R 11.3 W242724 11.3 W302724 14.4 W332724 15.7 W342724 15.5 W362724 17.0 W372724 16.8 W392724 18.4 W422724 19.2 • 24″ deep cabinets must be fully supported by screws installed in a structural member in the ceiling or soffit, and into adjacent cabinets. • Load limit is 15 lbs. per square foot of load bearing surface. Custom Modifications AUTHL ADDTK AUTHR • WALL CABINETS 271/2” 24” • CBO CCO CFNTO • • • FB FFDL FFDR FPEB • • • ID INVFRM CFP CFRMO CND • MIP P • EXB EXL EXR • • RD TD TVRAV TVRFV TVRVV • •* *Not available on 39″ and 42″ wide Construction Upgrades APC • 3/4X PE • Decorative Door Options ALF CG CG.BTM CG.TOP MD MD.BTM MD.TOP • Effective March 17, 2014 Model WALL SINGLE DOOR, 30″ HIGH 30” 12” Cubic Feet W930 L or R 2.9 W1230 L or R 3.7 W1530 L or R 4.5 W1830 L or R 5.3 W2130 L or R 6.1 W2430 L or R 6.9 • Addison W930 door panels feature a unique raised profile due to the narrow panel width. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • CFRMO CND • INVFRM EXB • • TVRAV TVRFV TVRVV MIP P RD TD • • • • Decorative Door Options Construction Upgrades APC CFP 101 EXL EXR PE ALF CG • •† • CG.BTM CG.TOP MD MD.BTM MD.TOP •‡ † Not available on 9″ and 24″ wide Not available on 9″ and 12″ wide ‡ WALL DOUBLE DOOR, 30″ HIGH 30” W2430 6.9 W2730 7.7 W3030 8.5 W3330 9.3 W3630 10.0 W3930 10.8 W4230 11.6 W4530 12.2 W4830CS 13.2 W4830 13.2 12” 30” 12” Custom Modifications AUTHL ADDTK AUTHR • 12” • CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • INVFRM CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV MIP P RD TD • • • •* *Not available on 39″, 42″, 45″, and 48″ wide Construction Upgrades APC • 3/4X Decorative Door Options ALF PE CG CG.BTM CG.TOP • • MD MD.BTM MD.TOP •† † Not available on 39″ wide WALL CABINETS 30” CBO Effective March 17, 2014 5 W3033 9.TOP Decorative Door Options ALF PE CG CG.1 W1533 L or R 5. 42”.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP ALF PE CG CG. 33″ HIGH W2433 7. 12”.2 9”.8 W2433 W2733 W3033 W3333 W3633 33” 12” 39”. 18”.Model Cubic Feet WALL SINGLE DOOR.3 W3633 11.6 24”.0 W4533 13.8 W4833 14.TOP •† • • † Not available on 9″ and 12″ wide WALL DOUBLE DOOR.BTM CG. 33″ HIGH W933 L or R 3. 33”. or 48” 33” W3933 W4233 W4533 W4833CS Custom Modifications 12” AUTHL ADDTK AUTHR 48” 33” • W4833 • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC 12” • 3/4X INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.TOP • • •† † WALL CABINETS Not available on 39″ wide Effective March 17. Custom Modifications 102 AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.BTM MD.BTM MD.0 W1833 L or R 5. 15”.BTM CG. or 36” W2733 8.9 W2133 L or R 6. 45”. 27”.2 W3933 12.3 W4833CS 14.7 W2433 L or R 7. or 24” W1233 L or R 4.1 W4233 13. 2014 . 21”.6 33” 12” • Addison W933 door panel feature a unique raised profile due to the narrow panel width. 30”.4 W3333 10. 5 W4836CS 14. 42”.TOP •‡ † Not available on 9″ and 24″ wide Not available on 9″ and 12″ wide ‡ WALL DOUBLE DOOR.BTM MD.8 W4536 14.5 W4836 14.0 W3336 11.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP 103 EXL EXR PE ALF CG • •† • CG.4 W1536 L or R 5.Model WALL SINGLE DOOR.8 W3936 11.BTM CG.TOP Decorative Door Options ALF PE CG CG. 36″ HIGH 36” 12” Cubic Feet W936 L or R 3. 2014 .BTM CG.2 W2736 9. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • CFRMO CND • MIP P RD • • • EXB • • TD TVRAV TVRFV TVRVV MD MD.2 • Addison W936 door panels feature a unique raised profile due to the narrow panel width.5 W1236 L or R 4.BTM MD.8 W4236 13.3 W1836 L or R 6.3 W2136 L or R 7.1 W3036 10.TOP • • •† † Not available on 39″ wide WALL CABINETS 12” Effective March 17.2 W2436 L or R 8. 45”.0 W3636 11.5 Custom Modifications AUTHL ADDTK AUTHR • W4836 36” • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC 12” • 3/4X INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 36″ HIGH W2436 W2736 W3036 W3336 W3636 36” 12” 39”. or 48” W3936 W4236 W4536 W4836CS 36” W2436 8. or 36” 39” W2439 W2739 W3039 W3339 W3639 12” 39”. 42”. 15”. 18”.Model Cubic Feet WALL SINGLE DOOR.2 W2739 9.BTM CG.9 Custom Modifications AUTHL ADDTK AUTHR 12” • 48” W4839 39” • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC • 3/4X INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.TOP •† • • † Not available on 9″ and 12″ wide WALL DOUBLE DOOR.TOP • • •† † Not available on 39″ wide WALL CABINETS 12” Effective March 17. 33”.7 W1839 L or R 6. 30”.0 W3339 11. or 48” W3939 W4239 W4539 W4839CS 39” W2439 8. 39″ HIGH 24”.9 W4839 16.8 W2439 L or R 8.8 W4539 15.8 W4239 13. 39″ HIGH W939 L or R 3. 2014 .BTM MD. 45”.0 W3639 11.BTM CG.9 W3939 11.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP ALF PE CG CG. 27”.BTM MD.7 9”.8 39” • Addison W939 door panels feature a unique raised profile due to the narrow panel width. 21” or 24” W1239 L or R 4. 12”.8 W2139 L or R 7.7 W1539 L or R 5.1 W3039 10.TOP Decorative Door Options ALF PE CG CG. 12” Custom Modifications 104 AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.6 W4839CS 16. 4 • Addison W942 door panels feature a unique raised profile due to the narrow panel width.TOP • • •† † Not available on 39″ wide WALL CABINETS 12” Effective March 17. 42″ HIGH 42” 12” Cubic Feet W942 L or R 4.3 W2142 L or R 8. 2014 .Model WALL SINGLE DOOR.8 W4242 15.3 W2442 L or R 9.1 Custom Modifications AUTHL ADDTK AUTHR 12” • W4842 42” • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC • 3/4X INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.4 W3042 11.1 W1542 L or R 6.2 W1842 L or R 7.9 W4542 17. 42”.4 W2742 10.7 W3942 14.5 W3342 12.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP 105 EXL EXR ALF PE CG CG. 42″ HIGH W2442 W2742 W3042 W3342 W3642 42” 12” 39”.0 W1242 L or R 5.TOP Decorative Door Options ALF PE CG CG.BTM CG.TOP •† • • † Not available on 9″ and 12″ wide WALL DOUBLE DOOR.0 W4842CS 18. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • CFRMO CND • MIP P RD • • • EXB • • TD TVRAV TVRFV TVRVV MD MD.6 W3642 13. or 48” W3942 W4242 W4542 W4842CS 42” W2442 9.BTM MD.BTM MD.1 W4842 18.BTM CG. 45”. 7 W2D1818TI 3.BTM MD. the tiered insert will be included but will not increase in depth. Door rack depth is 3 1/2″. 30″ HIGH 30” • • • • • 12” 106 Cubic Feet WEAS1530 L or R 4.BTM MD.5 WEAS3630 10.BTM CG. 12″ DEEP 18” CFRMO • Construction Upgrades 12” INVFRM CFP CBO CCO • • FPEB ID • • Construction Upgrades APC • 3/4X PE CFNTO CFP CFRMO CND • INVFRM MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 18”.7 12”. designed for use in top drawer.3 WEAS3030 8.0 Adjustable shelves are 7 1/2″ deep. Door rack width is 10 7/8″ on 15″ and 30″ wide cabinets.TOP • ALF PE • CFNTO Decorative Door Options Construction Upgrades 15”.2 W2D2418TI 4.BTM MD.3 • Removable tiered insert has a natural wood finish.3 • • TD TVRAV TVRFV TVRVV CG. • If depth is increased. 21”.8 W2D2418 4. 12″ DEEP EXB Decorative Door Options PE AUTHL ADDTK AUTHR CG CG.5 WEAS1830 L or R 5. Each door features a chrome and wood three-tiered rack.TOP MD MD. or 24” W2D1818 3. 15”.BTM CG.BTM CG.2 WALL TWO DRAWER CABINET with TIERED INSERT.2 W2D2118 3. 18″ HIGH. 2014 . Insert can be secured in field to eliminate movement in drawer box.TOP • Decorative Door Options ALF CG CG.TOP STD W2D1518TI 2.TOP CFRMO EXB P RD Custom Modifications • FB • FFDL FFDR CBO CCO • • FPEB ID • • STD APC 3/4X CFP CND • INVFRM MIP P RD EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 18” 12” Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD WALL CABINETS MIP W2D1218 12” CND • WALL TWO DRAWER CABINET. 18″ HIGH.TOP STD Effective March 17.Model WALL EASY ACCESS STORAGE CABINET. 18”. Custom Modifications WEAS1530 L or R WEAS1830 L or R AUTHL ADDTK AUTHR • 30” FB • FFDL FFDR CBO CCO CFNTO • • • FPEB • ID WEAS3030 WEAS3630 APC 3/4X • ALF CG W2D1518 2. Door rack width is 13 7/8″ on 18″ and 36″ wide cabinets. or 24” EXL EXR • 2. 6 W2D2454 11.TOP • W2D2448 10. or 24” 27” Frame Opening Height for 48” 30” Frame Opening Height for 51” 48” 51” or 54” 33” Frame Opening Height for 54” 18” W2D1548 L or R W2D1848 L or R W2D2448 L or R W2D1551 L or R W2D1851 L or R W2D2451 L or R W2D1554 L or R W2D1854 L or R W2D2454 L or R 12” 15”.4 W2D1551 L or R 7. 51″.BTM CG.TOP • 18” 12” Effective March 17. or 24” 36” Frame Opening Height for 57” 57” or 60” 39” Frame Opening W2D1557 L or R W2D1857 L or R W2D2457 L or R W2D1560 L or R W2D1860 L or R W2D2460 L or R Cubic Feet W2D1548 L or R 6.3 107 18” 12” Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD CBO CCO • • FPEB ID • • 3/4X • 24” 27” Frame Opening Height for 48” 30” Frame Opening Height for 51” 48” 51” or 54” 33” Frame Opening Height for 54” 18” W2D2448 W2D2451 W2D2454 24” 57” or 60” 39” Frame Opening W2D2457 W2D2460 ALF PE CG EXB • • • • TD TVRAV TVRFV TVRVV MD MD. 54″.4 W2D2460 L or R 12.TOP P RD CG. 57″.7 W2D1560 L or R 7.TOP P RD • Decorative Door Options ALF CG • CG. 54″. or 60″ HIGH.5 W2D1848 L or R 7.1 W2D1557 L or R 7.5 W2D1857 L or R 8.3 • Custom Modifications • 36” Frame Opening Height for 57” CND • STD AUTHL ADDTK AUTHR 12” MIP EXL EXR CFRMO FB • FFDL FFDR STD CBO CCO • • FPEB ID • • Construction Upgrades APC • 3/4X PE STD CFNTO INVFRM CFP MIP EXL EXR CFRMO CND EXB • • • • TD TVRAV TVRFV TVRVV MD MD.BTM MD. 12″ DEEP INVFRM CFP Decorative Door Options Construction Upgrades APC CFNTO .2 W2D1854 L or R 8.9 W2D2457 L or R 11. 57″. or 60″ HIGH. 51″.5 W2D1851 L or R 8.9 W2D2451 L or R 11. 48″.9 W2D1860 L or R 9.BTM CG.4 W2D2451 11.7 W2D2460 12.1 W2D2457 11.8 W2D2448 L or R 10. 18”.Model WALL TWO DRAWER SINGLE DOOR CABINET.5 W2D2454 L or R 11. 48″. 18”. 12″ DEEP 15”.6 W2D1554 L or R 7. 2014 WALL CABINETS WALL TWO DRAWER DOUBLE DOOR CABINET .BTM MD. 51″. 54″. 18”.BTM MD. or 24” 36” Frame Opening Height for 57” 57” or 60” 39” Frame Opening W2D1557TI L or R W2D1857TI L or R W2D2457TI L or R W2D1560TI L or R W2D1860TI L or R W2D2460TI L or R 18” 12” • Removable tiered insert has a natural wood finish. 57″. or 60″ HIGH. 18”. 2014 .9 W2D2451TI L or R 11.1 W2D1557TI L or R 7.8 W2D2448TI L or R 10.4 W2D2460TI L or R 12. designed for use in top drawer.3 15”.5 W2D1848TI L or R 7.9 W2D1860TI L or R 9.TOP P RD • Decorative Door Options ALF CG • CG.9 W2D2457TI L or R 11.7 W2D1560TI L or R 7. or 24” 27” Frame Opening Height for 48” 48” 51” or 54” 108 30” Frame Opening Height for 51” 18” 33” Frame Opening Height for 54” 12” W2D1548TI L or R W2D1848TI L or R W2D2448TI L or R W2D1551TI L or R W2D1851TI L or R W2D2451TI L or R W2D1554TI L or R W2D1854TI L or R W2D2454TI L or R 15”. 48″. 12″ DEEP Cubic Feet W2D1548TI L or R 6.Model WALL TWO DRAWER SINGLE DOOR CABINET with TIERED INSERT.5 W2D1857TI L or R 8. the tiered insert will be included but will not increase in depth.BTM CG.TOP • WALL CABINETS • 3/4X CFNTO Effective March 17. Insert can be secured in field to eliminate movement in drawer box. Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD CBO CCO • • FPEB ID • • Construction Upgrades APC PE STD INVFRM CFP MIP EXL EXR CFRMO CND EXB • • • • TD TVRAV TVRFV TVRVV MD MD.2 W2D1854TI L or R 8.5 W2D1851TI L or R 8.6 W2D1554TI L or R 7.4 W2D1551TI L or R 7. • If depth is increased.5 W2D2454TI L or R 11. 51″.3 24” 27” Frame Opening Height for 48” 48” 51” or 54” 30” Frame Opening Height for 51” 33” Frame Opening Height for 54” 18” W2D2448TI W2D2451TI W2D2454TI Custom Modifications 12” AUTHL ADDTK AUTHR 24” 36” Frame Opening Height for 57” 57” or 60” 39” Frame Opening W2D2457TI W2D2460TI 18” • Removable tiered insert has a natural wood finish. 54″. designed for use in top drawer.TOP • WALL CABINETS 12” Effective March 17.7 W2D2460TI 12. • FB • FFDL FFDR STD CBO CCO • • FPEB ID • • Construction Upgrades APC • 3/4X PE STD CFNTO INVFRM CFP MIP EXL EXR CFRMO CND EXB • • • • TD TVRAV TVRFV TVRVV MD MD. Insert can be secured in field to eliminate movement in drawer box. 57″. 2014 .TOP P RD 109 • Decorative Door Options ALF CG • CG. • If depth is increased.BTM CG. 48″.1 W2D2457TI 11. or 60″ HIGH. 12″ DEEP Cubic Feet W2D2448TI 10. the tiered insert will be included but will not increase in depth.1 W2D2454TI 11.4 W2D2451TI 11.Model WALL TWO DRAWER DOUBLE DOOR CABINET with TIERED INSERT.BTM MD. BTM CG.BTM MD.3 • • Includes one shallow depth drawer and two standard drawers.4 W3D2460 L or R 12. 51″. 54″.7 W3D2460 12. 2014 .6 W3D1554 L or R 7.8 W3D2448 L or R 10. 54″.TOP • STD W3D2448 10.BTM CG. 18” 12” W3D2457 W3D2460 Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD CBO CCO • • FPEB ID • • Construction Upgrades APC • 3/4X PE STD CFNTO INVFRM EXL EXR CFP CFRMO CND EXB • • • • • TD TVRAV TVRFV TVRVV MD MD. • Top drawer will be slab drawer front for all 5-piece drawer and Drawer Front Raised applications.6 W3D2454 11.TOP MIP P RD • Decorative Door Options Construction Upgrades APC CFNTO ALF PE CG CG.3 W3D1857 L or R 9.9 18” W3D1548 L or R W3D1848 L or R W3D2448 L or R W3D1548 L or R 36” Frame Opening Height for 57” 12” 12” Cubic Feet W3D1554 L or R W3D1854 L or R W3D2454 L or R W3D1860 L or R 9. • Top drawer will be slab drawer front for all 5-piece drawer and Drawer Front Raised applications.TOP MIP P RD • Decorative Door Options ALF CG • CG. 48″.5 W3D1848 L or R 7.4 W3D2451 11.TOP • Effective March 17.1 W3D2457 12. Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD CBO CCO • • FPEB ID • • 3/4X • WALL THREE DRAWER DOUBLE DOOR.BTM MD.1 W3D1557 L or R 8. or 60″ HIGH 15”. 48″.5 39” Frame Opening W3D1851 L or R 8.4 W3D1551 L or R 7. 57″.Model WALL THREE DRAWER SINGLE DOOR. 51″.7 W3D2457 L or R 12. or 24” 27” Frame Opening Height for 48” 30” Frame Opening Height for 51” 48” 51” or 54” 110 18” 33” Frame Opening Height for 54” 57” or 60” W3D1557 L or R W3D1857 L or R W3D2457 L or R W3D1551 L or R W3D1851 L or R W3D2451 L or R W3D1560 L or R W3D1860 L or R W3D2460 L or R 6.3 • Includes one shallow depth drawer and two standard drawers.7 W3D1560 L or R 7. or 60″ HIGH 24” 27” Frame Opening Height for 48” 30” Frame Opening Height for 51” 48” 51” or 54” 18” 12” WALL CABINETS W3D2448 W3D2451 W3D2454 33” Frame Opening Height for 54” 36” Frame Opening Height for 57” 57” or 60” 39” Frame Opening INVFRM EXL EXR CFP CFRMO CND EXB • • • • • TD TVRAV TVRFV TVRVV MD MD.9 W3D2451 L or R 11.5 W3D2454 L or R 11.2 W3D1854 L or R 8. 18”. 57″. 0 12”.Model Cubic Feet STACKED WALL CABINETS SINGLE DOOR.BTM MD.BTM MD. 15”.3 STW2148 L or R 9.TOP • • • MD MD. 30”. 42″.0 STW4848CS 20. 45”. 2014 .4 STW3648 15. or 24” STW1848 L or R 8.7 STW2748 12. 27”.6 STW4848 20.7 STW3948 16. and 24″ wide STACKED WALL CABINETS DOUBLE DOOR.TOP •† •† † Available only on 30″ and 36″ wide WALL CABINETS 12” Effective March 17.BTM CG. Custom Modifications AUTHL ADDTK AUTHR • 12” 48” CCO CFNTO • • • CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • •* • •* *Not available on 39″. and 48″ wide 15” Frame Opening Height STW4848 27” Frame Opening Height 48” • CBO Construction Upgrades APC • 3/4X Decorative Door Options ALF PE CG CG.5 STW2448 L or R 10. or 48” 15” Frame Opening Height STW3948 STW4248 STW4548 STW4848CS 48” 27” Frame Opening Height • Bottom doors will always be square. or 36” 15” Frame Opening Height 48” 27” Frame Opening Height STW2448 STW2748 STW3048 STW3348 STW3648 12” STW2448 10. 48” Custom Modifications 27” Frame Opening Height AUTHL ADDTK AUTHR 12” CBO CCO CFNTO • • • CFP CFRMO CND EXL EXR • • TVRAV TVRFV TVRVV • • FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • • • • 3/4X ALF PE • 111 Decorative Door Options Construction Upgrades APC • EXB CG CG. 48″ HIGH 24”.1 STW4548 19.0 STW3048 13.TOP • • MD MD.7 15” Frame Opening Height • Bottom doors will always be square.2 STW3348 14.6 39”.8 STW1548 L or R 7. 21″. 21”.9 STW4248 18.TOP •† • •† † Not available on 12″.BTM CG. 45″. 18”. 42”. 33”. 48″ HIGH STW1248 L or R 5. 3 STW4251 19. 2014 .BTM CG.TOP •† •† † Available only on 30″ and 36″ wide 30” Frame Opening Height 51” WALL CABINETS APC 12” Effective March 17. 51″ HIGH 12”. 21″.BTM MD. 21”. and 24″ wide STACKED WALL CABINETS DOUBLE DOOR. or 48” 15” Frame Opening Height • Bottom doors will always be square.6 STW2751 12.7 STW4551 20. 42″.BTM CG.BTM MD.2 STW2451 L or R 11. 45″. and 48″ wide 48” Construction Upgrades 15” Frame Opening Height STW4851 • 3/4X Decorative Door Options ALF PE CG CG. 51″ HIGH 24”.3 STW3351 15.6 STW3651 17. 42”. 18”. 30”. 51” Custom Modifications 30” Frame Opening Height 112 AUTHL ADDTK AUTHR • CBO CCO CFNTO • • • • CFP CFRMO CND • EXB • • TVRAV TVRFV TVRVV 12” FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • • • • Decorative Door Options Construction Upgrades APC 3/4X ALF PE • EXL EXR CG CG.TOP • • • MD MD. or 36” 15” Frame Opening Height STW2451 51” 30” Frame Opening Height STW2751 STW3051 STW3351 STW3651 12” STW2451 11.9 STW2151 L or R 10.9 STW3051 14.TOP • • MD MD.4 39”.5 STW1851 L or R 8.Model STACKED WALL CABINETS SINGLE DOOR.2 STW1551 L or R 7.6 • Bottom doors will always be square. 45”. 27”.2 STW4851CS 22. STW3951 STW4251 STW4551 STW4851CS 51” 30” Frame Opening Height Custom Modifications AUTHL ADDTK AUTHR • 12” • CBO CCO CFNTO • • • CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • •* • •* *Not available on 39″.4 STW4851 22.TOP •† • •† † Not available on 12″. 33”. 15”.0 STW3951 18. or 24” 15” Frame Opening Height Cubic Feet STW1251 L or R 6. BTM CG. 15”.2 STW3654 17. 54″ HIGH 24”. 33”.9 STW2754 STW3054 STW3354 STW3654 54” 12” 39”.0 STW2754 13.4 STW4554 21.3 STW2154 L or R 10.TOP • • • MD MD. or 24” STW1854 L or R 9. 45″. or 48” 15” Frame Opening Height STW3954 STW4254 STW4554 STW4854CS 54” STW2454 33” Frame Opening Height 12” • Bottom doors will always be square.0 15” Frame Opening Height • Bottom doors will always be square.9 STW4254 20. 27”. and 48″ wide Construction Upgrades 48” 15” Frame Opening Height APC • 3/4X Decorative Door Options ALF PE CG CG. 21”. 45”.Model Cubic Feet STACKED WALL CABINETS SINGLE DOOR. 42″. or 36” 12.TOP •† •† † STW4854 33” Frame Opening Height WALL CABINETS 54” Available only on 30″ and 36″ wide 12” Effective March 17.9 STW4854 25.BTM MD.6 STW2454 L or R 12.9 12”. 21″.4 STW3054 14. and 24″ wide STACKED WALL CABINETS DOUBLE DOOR. 30”. 42”. 54″ HIGH STW1254 L or R 6.BTM MD. 54” Custom Modifications 33” Frame Opening Height AUTHL ADDTK AUTHR CBO CCO CFNTO • • • CFP CFRMO CND EXL EXR • • TVRAV TVRFV TVRVV • • FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • • • • 12” 3/4X ALF PE • 113 Decorative Door Options Construction Upgrades APC • EXB CG CG.TOP • • MD MD.TOP •† • •† † Not available on 12″. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • •* • •* *Not available on 39″.BTM CG. 2014 .5 33” Frame Opening Height STW3954 18.3 STW4854CS 25.8 15” Frame Opening Height STW2454 STW3354 16. 18”.5 STW1554 L or R 7. or 24” STW1857 L or R 9.BTM CG. 18”.TOP • • MD • MD. 15”.BTM MD.8 STW1557 L or R 8.4 STW2157 L or R 11.3 12”. 57” 36” Frame Opening Height 114 Custom Modifications AUTHL ADDTK AUTHR • 12” • CBO CCO CFNTO • • • CFP CFRMO CND • EXB • • TVRAV TVRFV TVRVV FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • • • • Construction Upgrades APC • 3/4X EXL EXR Decorative Door Options ALF PE CG CG. and 24″ wide Effective March 17.7 15” Frame Opening Height • Bottom doors will always be square. 57″ HIGH STW1257 L or R 6. 2014 . 21″. 21”.TOP •† •† † WALL CABINETS Not available on 12″.2 STW2457 L or R 12.Model Cubic Feet STACKED WALL CABINETS SINGLE DOOR. 42”. and 48″ wide 12” Construction Upgrades APC 48” • 15” Frame Opening Height 3/4X Decorative Door Options ALF PE CG CG.TOP •† •† † Available only on 30″ and 36″ wide STW4857 57” 36” Frame Opening Height WALL CABINETS 12” Effective March 17.3 STW4857 24.0 STW4257 21.7 STW2757 14.BTM CG.6 STW3357 17.BTM MD. 45″.2 STW3057 15.Model STACKED WALL CABINETS DOUBLE DOOR.3 12” 39”. 57″ HIGH 24”. 27”. or 48” 15” Frame Opening Height 115 • Bottom doors will always be square.4 STW4557 22. 30”. 2014 .TOP • • • MD MD.5 STW4857CS 24.5 36” Frame Opening Height STW3957 20. or 36” 12. Custom Modifications STW3957 STW4257 STW4557 STW4857CS 57” STW2457 15” Frame Opening Height STW2457 STW2757 STW3057 STW3357 STW3657 57” Cubic Feet 36” Frame Opening Height AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • •* • •* *Not available on 39″. 42″. 33”.1 STW3657 18. 45”. 21″. 60″ HIGH STW1260 L or R 7.TOP • • MD • MD.TOP •† •† † WALL CABINETS Not available on 12″. 60” Custom Modifications 39” Frame Opening Height 116 AUTHL ADDTK AUTHR • 12” • CBO CCO CFNTO • • • CFP CFRMO CND • EXB • • TVRAV TVRFV TVRVV FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • • • • Construction Upgrades APC • 3/4X EXL EXR Decorative Door Options ALF PE CG CG.BTM CG. 21”. 18”.8 STW2460 L or R 13.7 12”. and 24″ wide Effective March 17. 15”.2 STW2160 L or R 11.Model Cubic Feet STACKED WALL CABINETS SINGLE DOOR. 2014 .3 15” Frame Opening Height • Bottom doors will always be square.BTM MD.2 STW1560 L or R 8. or 24” STW1860 L or R 10. Custom Modifications STW3960 STW4260 STW4560 STW4860CS 60” STW2460 15” Frame Opening Height STW2460 STW2760 STW3060 STW3360 STW3660 60” Cubic Feet 39” Frame Opening Height AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • CFP CFRMO CND • EXB EXL EXR • • TVRAV TVRFV TVRVV FB FFDL FFDR FPEB ID INVFRM MIP P RD TD • • • • • • •* • •* *Not available on 39″. 45″.4 STW3360 17.BTM MD.TOP •† •† † Available only on 30″ and 36″ wide STW4860 60” 39” Frame Opening Height WALL CABINETS 12” Effective March 17. or 36” 13. and 48″ wide 12” Construction Upgrades APC 48” 15” Frame Opening Height • 3/4X Decorative Door Options ALF PE CG CG.4 39” Frame Opening Height STW3960 21.9 STW3660 19. 45”. 60″ HIGH 24”. 42”. 2014 .Model STACKED WALL CABINETS DOUBLE DOOR.7 STW4860 31. or 48” 15” Frame Opening Height 117 • Bottom doors will always be square. 33”.BTM CG.7 12” 39”.9 STW3060 16. 42″. 27”.3 STW2760 14.6 STW4860CS 31. 30”.TOP • • • MD MD.5 STW4560 23.0 STW4260 22. Space D Cabinet Opening WC24. 23 1/2″ HIGH 231/2” 12” F Actual Cabinet • • • • Cubic Feet WC2424 L or R 5... E Partial Overlay At Min.Front View Wall Corner Cabinets 118 Top View C C • Wall corner cabinets may be installed flush to the wall (left) or pulled up to 3″ away from wall (right) to accommodate odd dimensions in a kitchen design. WC33. 2014 . WC36. Addison WC2424 door panels feature a unique raised profile due to the narrow panel width. L or R indicates void. WC45.5 WC2724 L or R 6. Pull* C Max. R (right) void shown... the adjoining run of 12″ wall cabinets plus a 3″ filler will butt against the solid wood panel.BTM CG. shipped unattached.BTM MD.TOP • WALL CABINETS • 3/4X INVFRM CFP Effective March 17. a 30″ wide WC pulled 2″ will use 32″ of space. • When a cabinet is ‘‘pulled’’ it will use proportionally more wall space.1 WC3024 L or R 6. In either case. • Blind side of wall corner cabinets cannot be installed next to a range hood or microwave shelf unit due to door interference.. Includes one 3″ filler. At Max. 42″ 45″ 48″ 5″ 4 1/2″ 5″ 4 1/2″ 4 1/2″ 35″ 37 1/2″ 41″ 43 1/2″ 46 1/2″ 13 1/2″ 15″ 19 1/2″ 21″ 24″ 1 3/4″ 3 1/4″ 1 3/4″ 3 1/4″ 3 1/4″ 6 3/4″ 7 3/4″ 6 3/4″ 7 3/4″ 7 3/4″ 2 1/2″ 4″ 2 1/2″ 4″ 4″ 7 1/2″ 8 1/2″ 7 1/2″ 8 1/2″ 8 1/2″ 30″ 33″ 36″ 39″ 42″ 4 1/2″ 4 1/2″ 49 1/2″ 52 1/2″ 27″ 30″ Model E* Full Overlay At Min.. Space B Max. Adjacent Cabinet Max. At Max. for example. Space A F E Clearance Min. 30″ 33″ 36″ 39″ WC42. WC27.. • The L or R in the cabinet’s nomenclature indicates the location of cabinet void. WC39. Model WALL CORNER SINGLE DOOR. WC48.8 Face Frame and Door on End modification not available on the void side of the cabinet. 3 1/4″ 7 3/4″ 4″ 8 1/2″ 45″ 3 1/4″ 7 3/4″ 4″ 8 1/2″ 48″ *Minimum/maximum space between inside edge of door and face of filler/adjoining cabinet.TOP Decorative Door Options ALF CG CG... Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC PE • CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. Space Wall Wall Corner Cabinet D D B 3” Filler Cabinet E Cabinet Wall NOTE: All outside stiles are 1 1/2″ wide A Min. 24″ 27″ 5″ 4 1/2″ 29″ 31 1/2″ 7 1/2″ 9″ 1 3/4″ 3 1/4″ 6 3/4″ 7 3/4″ 2 1/2″ 4″ 7 1/2″ 8 1/2″ 24″ 27″ WC30. Includes one 3″ filler. Includes one 3″ filler. R (right) void shown. shipped unattached.9 WC2730 L or R 7.6 WC4530 L or R 12. 2014 . R (right) void shown. 30″ HIGH 30” 12” • • • • Cubic Feet WC2430 L or R 6.2 WC4830 L or R 13.5 WC3630 L or R 10.BTM MD.TOP •† • • † Available only on 33″ wide WALL CORNER DOUBLE DOOR. L or R indicates void.TOP • WALL CABINETS 30” WC3930 L or R Effective March 17. 30″ HIGH • • • • 12” 10. Addison WC2430 door panels feature a unique raised profile due to the narrow panel width.2 Face Frame and Door on End modification not available on the void side of the cabinet.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP ALF PE CG CG.3 WC4230 L or R 11. shipped unattached.7 WC3030 L or R 8. L or R indicates void.TOP Decorative Door Options ALF CG • CG.Model WALL CORNER SINGLE DOOR.BTM CG.0 Face Frame and Door on End modification not available on the void side of the cabinet. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC • 3/4X PE • INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.BTM MD. 119 Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. WC3930 Peninsula and Mullion Door options cannot be ordered together due to the unavailability of Mullion Doors for the W3930 side.5 WC3330 L or R 9.BTM CG. shipped unattached.2 Face Frame and Door on End modification not available on the void side of the cabinet. 33″ HIGH 33” 12” 120 • • • • Cubic Feet WC2433 L or R 7. 36″ HIGH 36” 12” • • • • CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.BTM MD.TOP Decorative Door Options Construction Upgrades APC INVFRM CFP ALF PE CG CG. Addison WC2436 door panels feature a unique raised profile due to the narrow panel width. L or R indicates void.TOP • WALL CABINETS • 3/4X INVFRM CFP Effective March 17.TOP • • WC2436 L or R 8.5 WC3033 L or R 9.0 WC3336 L or R 11. shipped unattached. Addison WC2433 door panels feature a unique raised profile due to the narrow panel width.1 WC3636 L or R 11. R (right) void shown.Model WALL CORNER SINGLE DOOR. Includes one 3″ filler.BTM CG.BTM MD. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC PE • CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.6 WC2733 L or R 8.9 Face Frame and Door on End modification not available on the void side of the cabinet.3 WC3633 L or R 11.TOP Decorative Door Options ALF CG CG.1 WC3036 L or R 10. L or R indicates void. R (right) void shown. Includes one 3″ filler. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • WALL CORNER SINGLE DOOR. 2014 .4 WC3333 L or R 10.BTM CG.2 WC2736 L or R 9. BTM CG.TOP • WALL CABINETS 12” • • • • CFRMO Decorative Door Options Construction Upgrades APC INVFRM CFP Effective March 17. 39″ HIGH 24”. R (right) void shown. Addison WC2442 door panels feature a unique raised profile due to the narrow panel width. shipped unattached. shipped unattached. R (right) void shown. Addison WC2439 door panels feature a unique raised profile due to the narrow panel width.8 WC2739 L or R 9. Includes one 3″ filler. 2014 .8 WC3039 L or R 10.4 WC2742 L or R 10. 30”.8 WC3639 L or R 12.7 WC3642 L or R 13. L or R indicates void. 42″ HIGH 42” CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV ALF PE CG CG.Model WALL CORNER SINGLE DOOR.BTM MD. Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • Construction Upgrades APC • 3/4X PE • INVFRM CFP CFRMO CND • MIP P RD • • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. L or R indicates void. or 36” 39” 12” • • • • Cubic Feet WC2439 L or R 8.8 WC3339 L or R 11.5 WC3042 L or R 11.8 Face Frame and Door on End modification not available on the void side of the cabinet.BTM CG. 121 Custom Modifications AUTHL ADDTK AUTHR • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB ID • • • • 3/4X • WALL CORNER SINGLE DOOR. Includes one 3″ filler. 27”.TOP Decorative Door Options ALF CG CG.TOP MD MD.6 WC3342 L or R 12.TOP • • WC2442 L or R 9.BTM MD.5 Face Frame and Door on End modification not available on the void side of the cabinet. 33”. 24″ x 24″ 12” 15” or 18” 24” 24” Cubic Feet DW122424 L or R 5. 231/2” or 271/2” Custom Modifications 12” AUTHL ADDTK AUTHR • CBO CCO CFNTO • • • FB FFDL FFDR FPEB • • • ID APC 3/4X • DIAGONAL WALL. or 18″ HIGH.TOP CFRMO EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. • Full overlay styles use 38NPOHINGE. 30″.TOP MD MD.3 • Cabinets require 24″ x 24″ of corner wall space. Custom Modifications AUTHL ADDTK AUTHR • WALL CABINETS CG • • CBO CCO CFNTO • • • FB FFDL FFDR FPEB • • • Construction Upgrades APC • 3/4X PE • ID INVFRM CFP CND • MIP P RD • Decorative Door Options ALF CG • CG. • Full overlay styles use 38NPOHINGE.5 DW332424 L or R 13.TOP CFRMO EXB EXL EXR TD TVRAV TVRFV TVRVV CG.TOP CFRMO CND • MIP P RD • *Available only on 18″ high Decorative Door Options Construction Upgrades APC 3/4X • DIAGONAL WALL.BTM MD. 2014 .9 DW392424 L or R 16. 24″ or 27″ HIGH.5 DW152424 L or R 6. 24″ x 24″ 24” 24” ALF PE DW242424 L or R 10. 12” Custom Modifications AUTHL ADDTK AUTHR CBO CCO CFNTO • • • 122 FB FFDL FFDR FPEB • •* • ID INVFRM CFP EXB EXL EXR TD TVRAV TVRFV TVRVV CG.0 DW422424 L or R 17.9 DW362424 L or R 14. 36″.Model DIAGONAL WALL.TOP • Effective March 17. 33″. see page 406.2 DW272424 L or R 11.BTM CG.BTM CG.TOP MD MD.2 24” 39” or 42” 30” 33” or 36” 12” DW302424 L or R DW332424 L or R DW362424 L or R 12” DW392424 L or R DW422424 L or R 12” • Cabinets require 24″ x 24″ of corner wall space.BTM CG. 12″. 24″ x 24″ 24” 24” 24” INVFRM CFP CND • MIP P RD • Decorative Door Options Construction Upgrades ALF PE CG • • DW302424 L or R 12.7 DW182424 L or R 7. see page 406. • Adjustable shelves. see page 406.8 • Cabinets require 24″ x 24″ of corner wall space. or 42″ HIGH. • Adjustable shelf cannot be removed/retrofitted.BTM MD.BTM MD. 39″. 15″. • Full overlay styles use 38NPOHINGE. Custom Modifications AUTHL ADDTK AUTHR CBO CCO CFNTO • • • FB FFDL FFDR FPEB STD •* • ID INVFRM CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.3 DW182727 L or R 9. Adjustable shelf cannot be removed/retrofitted. see page 406. shipped unattached.TOP • STD DW302727 L or R 14. or 42″ HIGH.TOP • MIP P RD • Decorative Door Options Construction Upgrades ALF PE CG CG. 2014 WALL CABINETS 27” CG • STD .TOP • Effective March 17.TOP 123 • MIP P RD • *Available only on 18″ high Decorative Door Options Construction Upgrades APC 3/4X • DIAGONAL WALL.TOP • MIP P RD • Decorative Door Options ALF CG • CG. 15″.BTM CG. see page 406. Includes two 1/4″ x 12″.6 DW392727 L or R 20. 24″ or 27″ HIGH. • Includes two 1/4″ x 30″.BTM CG. Except with FPEB. 33″.0 DW422727 L or R 20.7 Cabinets require 27″ x 27″ of corner wall space. shipped unattached.TOP Cabinets require 27″ x 27″ of corner wall space. 12″. Recommend a tall space filler be ordered separately when cabinets are used in a stacking application. 27″ x 27″ 27” 12” 15” or 18” 27” • • • • 15” Cubic Feet DW122727 L or R 6.1 CG. • Full overlay styles use 38NPOHINGE.8 DW152727 L or R 8. 27″ x 27″ 27” 27” • • • • • 231/2” or 271/2” 15” ALF PE DW242727 L or R 12. Includes two 1/4″ x 24″ or 27″ space fillers.7 DW272727 L or R 14. 27″ x 27″ 27” 27” INVFRM CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.1 DW362727 L or R 17. Except with FPEB. Full overlay styles use 38NPOHINGE.BTM CG. 36″. or 18″ HIGH.7 DW332727 L or R 16. 39″.5 27” 39” or 42” 30” 33” or 36” 15” DW302727 L or R DW332727 L or R DW362727 L or R 15” DW392727 L or R DW422727 L or R 15” • Cabinets require 27″ x 27″ of corner wall space. Custom Modifications AUTHL ADDTK AUTHR • CBO CCO CFNTO • • • FB FFDL FFDR FPEB STD • • ID APC 3/4X • DIAGONAL WALL. or 18″ space fillers. shipped unattached. 15″. Full overlay styles use 38NPOHINGE.Model DIAGONAL WALL. Except with FPEB. Recommend a tall space filler be ordered separately when cabinets are used in a stacking application. Custom Modifications AUTHL ADDTK AUTHR • CBO CCO CFNTO • • • FB FFDL FFDR FPEB STD • • Construction Upgrades APC • 3/4X PE STD ID INVFRM CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.BTM MD.BTM MD. 30″. 36″.BTM MD. see page 406. 39″ or 42″ space fillers. 51″. 48″.9 DW392424T L or R 23. 30″. 36″.0 DW422424S L or R 17.TOP • MIP P RD • Decorative Door Options ALF CG • CG. 57″. 39″.9 DW362424S L or R 14.0 DW362424T L or R 21.Model DIAGONAL WALL with LAZY SUSAN.5 DW332424S L or R 13.TOP • WALL CABINETS • ID • CFP Effective March 17. Shelves rotate independently. or 42″ HIGH. or 60″ HIGH. see page 406. Custom Modifications 18” 12” DW392424T L or R DW422424T L or R 12” AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB Construction Upgrades APC INVFRM 3/4X PE STD CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.2 24” 39” or 42” 30” 33” or 36” 124 24” Cubic Feet 12” 12” DW302424S L or R DW332424S L or R DW362424S L or R 12” DW392424S L or R DW422424S L or R • • • • Cabinets require 24″ x 24″ of corner wall space. Full overlay styles use 38NPOHINGE. Plywood shelves are 18″ in overall diameter with a 17″ interior diameter and 1″ high lip.3 • • Cabinets require 24″ x 24″ of corner wall space. 33″.TOP • MIP P RD • Decorative Door Options Construction Upgrades APC INVFRM CFP ALF PE CG CG.BTM MD. see page 406. 24″ x 24″ 24” 24” 24” 24” 57” or 60” 48” 51” or 54” 18” 12” DW302424T L or R DW332424T L or R DW362424T L or R CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. Custom Modifications AUTHL ADDTK AUTHR • CBO CCO CFNTO • • • FB FFDL FFDR FPEB • • • ID 3/4X • DIAGONAL WALL with TAMBOUR. • Full overlay styles use 38NPOHINGE. 2014 .6 DW332424T L or R 21.9 DW422424T L or R 24.BTM CG.BTM CG. 54″.BTM MD. 24″ x 24″ 24” 24” DW302424S L or R 12.9 DW392424S L or R 16.TOP • • DW302424T L or R 19. Full overlay styles use 38NPOHINGE. Bottom door will always be square. Except with FPEB. see page 406. 27″ x 27″ 27” 18” 15” DW302727T L or R DW332727T L or R DW362727T L or R EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.9 DW422424D L or R 24.2 DW332727T L or R 23.TOP • MIP P RD • Decorative Door Options ALF CG • CG.9 DW392727T L or R 25.BTM CG. 51″. 51″.0 DW362424D L or R 21. • Includes two 1/4″ x 48″.9 DW392424D L or R 23. Bottom section does not have floor. Mullion Doors not available on bottom door. 48″.3 24” 57” or 60” 48” 51” or 54” 18” 18” 12” 12” DW302424D L or R DW332424D L or R DW362424D L or R DW392424D L or R DW422424D L or R 12” • • • • • Cabinets require 24″ x 24″ of corner wall space. 54″. 57″.TOP • MIP P RD Decorative Door Options ALF PE CG CG.BTM CG. 57″. or 60″ HIGH.7 • • 27” 27” 57” or 60” 48” 51” or 54” CND • Cabinets require 27″ x 27″ of corner wall space. see page 406.6 DW332424D L or R 21.Model DIAGONAL WALL with LOWER DOOR.7 DW422727T L or R 27.1 DW362727T L or R 24. or 60″ HIGH. 2014 . 54″. Custom Modifications 18” 15” DW392727T L or R DW422727T L or R 15” AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB Construction Upgrades APC • ID INVFRM • 3/4X PE STD CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 48″. • Full overlay styles use 38NPOHINGE.BTM MD.TOP • STD DW302727T L or R 22. 24″ x 24″ 24” 24” 24” Cubic Feet DW302424D L or R 19. 54″. 57″ or 60″ space fillers. 125 Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB ID 3/4X • DIAGONAL WALL with TAMBOUR.TOP • WALL CABINETS 27” CFRMO • Construction Upgrades APC INVFRM • CFP Effective March 17.BTM MD. shipped unattached. 51″. 48″. or 60″ HIGH.BTM MD. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB Construction Upgrades APC INVFRM 3/4X PE STD CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. Full overlay styles use 38NPOHINGE. 57″ or 60″ space fillers. 57″.9 DW392424TS L or R 23.7 DW422727D L or R 27. see page 406. 51″.9 DW422424TS L or R 24.2 DW332727D L or R 23.BTM MD. Shelves rotate independently.9 DW392727D L or R 25. 51″. shipped unattached.7 27” 57” or 60” 48” 51” or 54” 126 27” Cubic Feet 18” 18” 15” 15” DW302727D L or R DW332727D L or R DW362727D L or R 15” DW392727D L or R DW422727D L or R • • • • • • Cabinets require 27″ x 27″ of corner wall space. Plywood shelves are 18″ in overall diameter with a 17″ interior diameter and 1″ high lip. 2014 . Full overlay styles use 38NPOHINGE. 48″.BTM CG. 24″ x 24″ 24” 24” 24” CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. or 60″ HIGH. Bottom section does not have floor.3 • • 24” 48” 51” or 54” 57” or 60” 18” 12” DW302424TS L or R DW332424TS L or R DW362424TS L or R • • • • 18” 12” DW392424TS L or R DW422424TS L or R 12” Cabinets require 24″ x 24″ of corner wall space. Except with FPEB. Mullion Doors not available on bottom door.TOP • STD DW302424TS L or R 19. 51″.TOP • MIP P RD • Decorative Door Options ALF CG • CG. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB ID 3/4X • DIAGONAL WALL with TAMBOUR and LAZY SUSAN.0 DW362424TS L or R 21. 57″.6 DW332424TS L or R 21. 54″.TOP • MIP P RD • Decorative Door Options Construction Upgrades APC INVFRM • CFP ALF PE CG CG. Bottom door will always be square. 54″. Includes two 1/4″ x 48″. see page 406.BTM CG.TOP • WALL CABINETS • ID • CFP Effective March 17.1 DW362727D L or R 24.Model DIAGONAL WALL with LOWER DOOR. 54″. 27″ x 27″ 27” 27” DW302727D L or R 22. Full overlay styles use 38NPOHINGE.0 DW362424DS L or R 21. Shelves rotate independently. or 33” Frame Opening Height 12” STDW482424 L or R STDW512424 L or R STDW542424 L or R 27” 24” 12” 27” 15” Frame Opening Height 48” 51” or 54” 27”.9 DW422424DS L or R 24. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB ID APC 3/4X • 24” 15” Frame Opening Height 48” 51” or 54” 27”.6 STDW542727 L or R 24.9 DW392424DS L or R 23. • Bottom doors will always be square.1 • • • Cabinet requires 24″ x 24″ or 27″ x 27″ of corner wall space.4 STDW512424 L or R 21. see page 406. 48″. Mullion Doors not available on bottom door.BTM CG. 51″. Bottom door will always be square. see page 406. 2014 .0 STDW512727 L or R 26. • Full overlay styles use 38NPOHINGE.BTM MD.TOP • • WALL CABINETS 24” Cubic Feet Effective March 17.1 STDW542424 L or R 21. 24″ x 24″ 24” 24” DW302424DS L or R 19. or 60″ HIGH.TOP • STD STDW482424 L or R 19. Bottom section does not have floor.TOP • MIP P RD • Decorative Door Options ALF CG CG.6 DW332424DS L or R 21.BTM MD.TOP • MIP P RD • Decorative Door Options Construction Upgrades STACKED DIAGONAL WALL. 54″. 51″. 30”. or 33” Frame Opening Height 15” STDW482727 L or R STDW512727 L or R STDW542727 L or R 15” INVFRM • CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 30”. 48″. 57″.3 24” 48” 51” or 54” 57” or 60” 18” • • • • • • • 18” 12” 12” DW302424DS L or R DW332424DS L or R DW362424DS L or R 12” DW392424DS L or R DW422424DS L or R Cabinets require 24″ x 24″ of corner wall space. Plywood shelves are 18″ in overall diameter with a 17″ interior diameter and 1″ high lip. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB Construction Upgrades APC • ID INVFRM • 3/4X PE STD CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.BTM CG. or 54″ HIGH 127 ALF PE CG CG.Model DIAGONAL WALL with LOWER DOOR and LAZY SUSAN.6 STDW482727 L or R 23. Custom Modifications AUTHL ADDTK AUTHR • STDW572424 L or R STDW602424 L or R STDW572727 L or R STDW602727 L or R FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB Construction Upgrades APC INVFRM 3/4X PE STD CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. see page 406.3 STDW602727 L or R 29. • Full overlay styles use 38NPOHINGE.Model STACKED DIAGONAL WALL.BTM MD.3 27” 36” or 39” Frame Opening Height 128 Cubic Feet 15” • Cabinet requires 24″ x 24″ or 27″ x 27″ of corner wall space. • Bottom doors will always be square. 2014 .BTM CG.TOP • • WALL CABINETS • ID • CFP Effective March 17.4 STDW602424 L or R 24.9 STDW572727 L or R 26. 57″ or 60″ HIGH 24” 27” 24” 15” Frame Opening Height 57” or 60” 12” 12” 15” Frame Opening Height 57” or 60” 36” or 39” Frame Opening Height 15” STDW572424 L or R 21.TOP • MIP P RD • Decorative Door Options ALF CG CG. 30″. shelves will not align with mullions.5 DW302424PRR 12.5 DW302424PLR 12.9 DW362424PLL 14. The second L or R in the product code indicates the position of the 24″ wide doors relative to the DW side.9 DW332424PRL 13. PLL PLR PRL PRR NOTE: All Peninsula wall cabinets must be fully supported by screwing into ceiling or soffit.9 DW362424PRL 14.BTM CG. The door on the peninsula side opens off the left side of the cabinet interior.BTM MD.2 129 • RL door hinging shown. designations refer to wall openings as well as hinge location.9 DW362424PRR 14.Model 24” 24” 241/4” 30” 33” or 36” 121/4” 241/4” 12” 39” or 42” 121/4” 12” DW302424PLL 12. Custom Modifications AUTHL ADDTK AUTHR FB FFDL FFDR • CBO CCO CFNTO • • • FPEB Construction Upgrades APC • ID INVFRM • 3/4X PE • CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 39″.5 DW332424PLL 13. All PLL. 36″. and by screwing into adjoining cabinets. or 42″ HIGH.0 DW392424PLR* 16. per square foot.9 DW332424PRR 13. Weight load limit is 15 lbs. *When ordered with MD. 2014 .0 DW422424PLL* 17. see page 406.9 DW332424PLR 13.2 DW422424PRL* 17. • Full overlay styles use 38NPOHINGE.0 DW392424PRL* 16.TOP • MIP P • STD RD Decorative Door Options ALF CG CG.2 DW422424PRR* 17. 24″ x 24 1/4″ Cubic Feet Effective March 17. WALL CABINETS DIAGONAL WALL PENINSULA.9 DW392424PLL* 16. A PLL is left hinged on the kitchen (DW) side.TOP • • Diagonal Wall Peninsula Diagonals are different. PLR. etc.2 DW422424PLR* 17.5 DW302424PRL 12.0 DW392424PRR* 16. 33″.9 DW362424PLR 14. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR • CBO CCO • • FPEB 3/4X PE CFP MIP CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 30″. 39″. Adjustable shelves.TOP • ER30 L or R 12.2 Requires 24″ x 24″ of corner wall space. Addison door panels feature a unique raised profile due to the narrow panel width.TOP • Decorative Door Options Construction Upgrades APC CFNTO ALF PE CG CG.7 ER422121 L or R 13.3 ER362121 L or R 11.8 ER392121 L or R 12. 36″.7 Addison door panels feature a unique raised profile due to narrow panel width. or 42″ HIGH.BTM MD. Integrated soft close hinge not included. 2014 .9 ER36 L or R 14.TOP • WALL CABINETS • INVFRM • Construction Upgrades APC ID CFNTO Effective March 17.5 ER33 L or R 13. or 42″ HIGH. Hinged door opens 170°. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of ER. Integrated soft close hinge not included.Model EASY REACH WALL CORNER. 24″ x 24″ 24” 24” 24” 24” 39” or 42” 30” 33” or 36” 12” 12” • • • • • • INVFRM • CFP MIP CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.0 ER42 L or R 17. Hinged door opens 170°.TOP • Decorative Door Options ALF CG CG.BTM MD.9 ER332121 L or R 10. 33″. 33″.BTM CG. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR • CBO CCO • • FPEB ID 3/4X • EASY REACH WALL CORNER. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets face frame of ER. 36″. 21″ x 21″ 21” 21” 21” 21” 39” or 42” 30” 33” or 36” 130 • • • • • 12” 12” Cubic Feet ER302121 L or R 9.9 ER39 L or R 16. 39″. Adjustable shelves. 30″.BTM CG. BTM CG. Nomenclature for asymmetrical cabinets reads as follows: First set of numbers = height Second set of numbers = left side Third set of numbers = right side Addison door panels feature a unique raised profile due to the narrow panel width.2 131 12” • • • • • • • • Hinged door opens to 170°. ER_ _2124L shown. 2014 . Adjustable shelves.3 ER332421 L or R 13. 30″. Legs at the front frames are 9″ on 21″ leg and 12″ on 24″ leg.TOP • Decorative Door Options ALF CG CG. Integrated soft close hinge not included.9 ER362421 L or R 14.2 ER422421 L or R 17.5 ER332124 L or R 13. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of ER. or 42″ HIGH 21” or 24” 21” or 24” 21” or 24” 39” or 42” 30” 33” or 36” 12” 9” 12” ER302124 L or R 12.3 ER362124 L or R 14. 36″.0 ER422124 L or R 17.9 ER392124 L or R 16. 33″.5 ER302421 L or R 12.TOP • WALL CABINETS 21” or 24” Cubic Feet Effective March 17.BTM MD. 39″. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR • CBO CCO • • FPEB • INVFRM • Construction Upgrades APC ID CFNTO 3/4X PE CFP MIP CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.0 ER392421 L or R 16.Model ASYMMETRICAL EASY REACH WALL CORNER. 5 W1233COA 14. 33″.0 W930COA 10.2 W939COA 13.Model 135 DEGREE CORNER OUTSIDE WALL.3 12” Custom Modifications 225˚ 12” 135˚ B A A • Doors are hinged on outside of frame.6 W1230COA 13. or 36″ HIGH 12” 12” A 12” W630COA 8. B indicates face frame width. (*) indicates height of cabinet.TOP CFRMO CND P RD • Decorative Door Options Construction Upgrades APC CFNTO ALF PE CG • • W639COA 10. • Adjustable shelves cannot be removed from cabinet. (*) indicates height of cabinet. 2014 .5 W1239COA 17.TOP MD MD.BTM CG.TOP • WALL CABINETS • INVFRM • Construction Upgrades APC ID CFNTO Effective March 17.4 W1242COA 18. 30″. B A B Model Dimension Dimension W6(*)COA 6″ 10 15/16″ W9(*)COA 9″ 13 15/16″ W12(*)COA 12″ 16 15/16″ A indicates back width of cabinet and wall space. AUTHL ADDTK AUTHR FB FFDL FFDR • CBO CCO • • FPEB 3/4X PE • CFP MIP CND P RD • Decorative Door Options ALF CG CG. B indicates face frame width. • Adjustable shelves cannot be removed from cabinet. • Doors are hinged on outside of frame.5 W936COA 12.1 W642COA 11.BTM CG.TOP CFRMO EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.9 225˚ 12” 135˚ B 132 A 30” 33” or 36” Cubic Feet B A B Model Dimension Dimension W6(*)COA 6″ 10 15/16″ W9(*)COA 9″ 13 15/16″ W12(*)COA 12″ 16 15/16″ A indicates back width of cabinet and wall space. Custom Modifications AUTHL ADDTK AUTHR FB FFDL FFDR • CBO CCO • • FPEB ID 3/4X • 135 DEGREE CORNER OUTSIDE WALL.BTM MD.5 W1236COA 15.BTM MD.6 W636COA 9.4 W633COA 8. 39″ or 42″ HIGH 12” 12” 39” or 42” INVFRM • CFP MIP EXB EXL EXR TD TVRAV TVRFV TVRVV CG.0 W942COA 14.8 W933COA 11. 3 • Doors are hinged on outside of frame.1 W2142CIA 23.7 W2733CIA 26. 39″ or 42″ HIGH 39” or 42” 12” 22.4 W2742CIA 33. A Custom Modifications 135˚ A 12” W2139CIA 225˚ CBO B 12” A B Model Dimension Dimension W21(*)CIA 21″ 16 1/16″ W24(*)CIA 24″ 19 1/16″ W27(*)CIA 27″ 22 1/16″ A indicates back width of cabinet and wall space.TOP • Decorative Door Options ALF PE CG • • CG.4 W2133CIA 19.1 W2433CIA 22.BTM MD. (*) indicates height of cabinet.TOP • Decorative Door Options Construction Upgrades APC CFNTO ALF PE CG CG.8 W2730CIA 24. Custom Modifications AUTHL ADDTK AUTHR FB FFDL FFDR • CBO CCO • • FPEB ID INVFRM • 3/4X • CFP MIP CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.2 W2439CIA 26.TOP •† • • † Available only on W2430CIA. 30″.BTM CG. 2014 .BTM CG. • Doors are hinged on outside of frame.BTM MD. (*) indicates height of cabinet.Model 135 DEGREE CORNER INSIDE WALL.8 W2442CIA 28. W2433CIA. • Adjustable shelves cannot be removed from cabinet.6 W2736CIA 28.8 135˚ 133 A 12” 225˚ B B 12” A B Model Dimension Dimension W21(*)CIA 21″ 16 1/16″ W24(*)CIA 24″ 19 1/16″ W27(*)CIA 27″ 22 1/16″ A indicates back width of cabinet and wall space. FB FFDL FFDR • FPEB • CFNTO • • ID INVFRM • Construction Upgrades APC CCO 3/4X CFP MIP CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. and W2436CIA 135 DEGREE CORNER INSIDE WALL. or 36″ HIGH 30” 33” or 36” 12” A Cubic Feet W2130CIA 17. B indicates face frame width. B indicates face frame width.TOP •† † Available only on W2439CIA and W2442CIA WALL CABINETS AUTHL ADDTK AUTHR B Effective March 17.7 W2436CIA 24. • Adjustable shelves cannot be removed from cabinet. 33″.5 W2430CIA 20.6 W2136CIA 20.5 W2739CIA 31. *When ordered with MD.1 WEC1236 L or R 4. 54″. 30″. or 33” Frame Opening Height 17” Diagonal Front Width CG CG.7 STWEC1251 L or R 6. or 42″ HIGH.0 • • Width at wall: 12″ x 12″. 48″.4 WEC1239 L or R* 4. • Cabinet features two unfinished back panels.9 • Width at wall: 12″ x 12″.7 WEC1242 L or R* 4. 12” 39” or 42” 30” 33” or 36” Cubic Feet Custom Modifications AUTHL ADDTK AUTHR 17” Diagonal Front Width FB FFDL FFDR CBO CCO CFNTO • • • FPEB ID INVFRM CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 12″ x 12″ 12” 17” 12” 12” 12” 12” 134 WEC1230 L or R 3. 12″ x 12″ 12” 17” 12” 12” 12” 15” Frame Opening Height 12” 15” Frame Opening Height 48” 51” or 54” 12” 57” or 60” 36” or 39” Frame Opening Height 27”. Must be installed with one back panel adjacent to a cabinet of equal height with the other back panel attached to the wall. or 60″ HIGH.TOP • • STWEC1248 L or R 5.7 STWEC1260 L or R 7. Custom Modifications AUTHL ADDTK AUTHR FB FFDL FFDR CBO CCO CFNTO • • • FPEB STD Construction Upgrades APC PE CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 57″.0 STWEC1254 L or R 6.BTM MD. 33″.7 WEC1233 L or R 4. shelves will not align with mullions.BTM MD. 2014 . 30”.Model WALL END CABINET SINGLE DOOR.TOP • MIP P RD • Decorative Door Options Construction Upgrades APC 3/4X ALF PE STACKED WALL END CABINET SINGLE DOOR. Must be installed with one back panel adjacent to a cabinet of equal height with the other back panel attached to the wall. 51″.BTM CG. • Cabinet features two unfinished back panels.BTM CG. 36″.4 STWEC1257 L or R 6.TOP • INVFRM MIP • • P RD Decorative Door Options ALF CG CG.TOP • • WALL CABINETS • 3/4X ID CFP Effective March 17. 39″. BTM CG. Must be installed with one back panel adjacent to a cabinet of equal height with the other back panel attached to the wall. • Addison door panels feature a unique raised profile due to the narrow panel width. • Addison door panels feature a unique raised profile due to the narrow panel width.1 WEC1236D 4. 36″.BTM MD. • Cabinet features two unfinished back panels. 51″. 54″. 57″. or 60″ HIGH. • Decorative glass inserts are not available. 39″.Model WALL END CABINET DOUBLE DOOR. 12″ x 12″ 12” 12” 12” 671/2 95/32” 671/2 12” 95/32” 12” 135 12” 12” WEC1230D 3.0 STWEC1254D 6. 2014 . 33″. or 33" Frame Opening Height STWEC1248D 5.7 WEC1233D 4.TOP • • WALL CABINETS STACKED WALL END CABINET DOUBLE DOOR. 12″ x 12″ CG • • Effective March 17.BTM CG.7 WEC1242D 4.0 • Width at wall: 12″ x 12″.7 STWEC1260D 7. • Decorative glass inserts are not available.TOP FB FFDL FFDR CBO CCO • • FPEB STD Construction Upgrades APC • 3/4X PE ID CFNTO CFP INVFRM MIP • • CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 30". • Cabinet features two unfinished back panels. 30″.9 • Width at wall: 12″ x 12″.4 STWEC1257D 6.BTM MD. Custom Modifications AUTHL ADDTK AUTHR 95/32” 95/32” Diagonal Side Width CG.TOP 135 • Decorative Door Options Construction Upgrades APC 3/4X ALF PE 12” 12” 12” 671/2 95/32” 12” 12” 671/2 95/32” 15” Frame Opening Height 135 12” 12” 15" Frame Opening Height 48” 51” or 54” 57” or 60” 36” or 39” Frame Opening Height 27". Must be installed with one back panel adjacent to a cabinet of equal height with the other back panel attached to the wall.4 WEC1239D 4.TOP Decorative Door Options ALF CG CG.7 STWEC1251D 6. 39” or 42” 30” 33” or 36” Cubic Feet Custom Modifications 95/32” 95/32” Diagonal Side Width AUTHL ADDTK AUTHR FB FFDL FFDR CBO CCO • • FPEB ID CFNTO INVFRM CFP MIP CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 48″. or 42″ HIGH. 5 WQRES642RT 2.5 12” 5” WQRES633ST L or R WQRES639ST L or R Square Top and Radius Bottom Panels 12” 1. Matching interior. will not feature sand-through characteristics. Only top panel is square.8 WQRES633STSB 1.2 WQRES639STSB 2. Veneer construction.9 Radius Top and Bottom Panels WQRES636RT 2.9 Units are reversible. Matching interior. Hardwood veneer on 3/4″ furniture board core. 36″. 9 9/16” 8 13/16” Construction Upgrades 9 9/16” 8 13/16” APC 3/4X PE 12” 5” • Square Top and Bottom Panels 12” 5” 12” 12” 12” 5” 10” 9” 30” 9” 5” 5” 9 9/16” 8 13/16” 11” 8 13/16” 10” 36” 11” 10” 11” 9 9/16” 42” 39” 8 13/16” 8 13/16” 9 9/16” 9 9/16” WALL CABINETS 9” 33” 5” 12” Effective March 17.9 WQRES636STSB 2. 11” 10” 9” 136 12” 5” 11” 11” 5” 5” 9 9/16” 8 13/16” 9 9/16” 8 13/16” 39” 8 13/16” WQRES636ST L or R 2.5 WQRES642STSB 2.9 12” 5” 4” Radius 12” 12” 5” 30” 9” 33” 12” 36” 10” 10” 9” 12” 5” • • • • • • Units are reversible. 12″ deep x 5″ wide. If ordered with Heirlooming Technique. 2014 . 39″. finished to match cabinet face frame. • If ordered with Heirlooming Technique. 30″.2 WQRES639RT 2. Hardwood veneer on 3/4″ furniture board core. or 42″ HIGH WQRES630RT 1.3 2. • Hardwood veneer on 3/4″ furniture board core. • Matching interior. 9 9/16” 8 13/16” MODIFICATIONS 42” 39” No modifications available for these products. 33″. • Veneer construction. • If ordered with Heirlooming Technique.5 WQRES642ST L or R 2. 4″ shelf radius. will not feature sand-through characteristics.8 9 9/16” 42” 8 13/16” WQRES630ST L or R 12” 5” 5” 11” 36” 11” 11” • • • • • 5” 5” 9 9/16” 8 13/16” WQRES630STSB 1. will not feature sand-through characteristics. finished to match cabinet face frame.8 WQRES633RT 1. Veneer construction. finished to match cabinet face frame.Model Cubic Feet WALL QUARTER ROUND END SHELF.9 9 9/16” • Specify left or right. 5” 12” 9” 10” 30” 9” 33” 10” 9” 10” 12” 12” 2. Right shown. Radius moulding is not available for WQRES636RT. 1 WQRES1230STSB 3.1 Top View 12” 11 3 /4" 12” 12” 12” 12” 12” 12” 12” 11” 9” 10” 30” 9” 33” 10” 9” 10” 12” • Hardwood veneer on 3/4″ furniture board core.0 WQRES1236RT 4. 2014 . • Veneer construction. 12″ RADIUS.4 WQRES1239STSB 4. 9 9/16” MODIFICATIONS 8 13/16” 9/ ” No modifications available for these products. If ordered with Heirlooming Technique. White Thermofoil styles are laminate. 39″.0 WQRES1236STRB 4.7 WQRES1242STSB 5.0 WQRES1236STSB 4. will not feature sand-through characteristics. or 42″ HIGH Radius Top and Bottom Panels Cubic Feet WQRES1230RT 3.7 WQRES1233RT 4. White thermofoil styles are laminate. 12” 12” 36” 11” 11” 12” 9 9/16” 8 13/16” 9 9/16” 13 39” 8 /16” 42” 8 13/16” 9 9/16” 8 13/16” 9 9/16” 12” 12” 12” 12” 9” 30” 9” 33” 10” 36” 11” 9” 10” 11” 12” 12” • • • • 12” 9 9/16” 8 13/16” WQRES1233STRB 4. 33″. finished to match cabinet face frame. 8 13/16” 9 9/16” 8 13/16” 39” 12” 11” 10” 12” 3. 30″. • If ordered with Heirlooming Technique. Veneer construction. • Matching interior. • If ordered with Heirlooming Technique.1 Hardwood veneer on 3/4″ furniture board core.Model WALL QUARTER ROUND END SHELF.7 • Hardwood veneer on 3/4″ furniture board core. • Veneer construction. 36″. will not feature sand-through characteristics. Matching interior. finished to match cabinet face frame.7 WQRES1242RT 5. will not feature sand-through characteristics. White Thermofoil styles are laminate. • Matching interior.7 WQRES1233STSB 4.7 WQRES1242STRB 5.4 WQRES1239STRB 4.4 WQRES1239RT 4. finished to match cabinet face frame. Square Top and Radius Bottom Panels 12” WQRES1230STRB 137 42” 9 16 Construction Upgrades APC 3/4X PE • Square Top and Bottom Panels 12” 9” 10” 30” 9” 33” 10” 9” 10” 12” 12” 12” 12” 12” 12” 9/ ” 8 13/16” 11” 8 13/16” 36” 11” 39” 9 9/16” 42” 8 13/16” 11” 12” 9 16 8 13/16” 9 9/16” 9 9/16” WALL CABINETS 12” 12” Effective March 17. see page 406.TOP • WALL CABINETS • 3/4X Effective March 17.1 WTC1236RR 8. 39″.1 WTC1236RL 8.1 WTC1239LL 8.9 WTC1230RR 6.6 WTC1236LL 8. 30″. 36″.BTM CG. • Depth can be reduced to a minimum of 18″. 33″. RR shown. • Full overlay styles use 38NPOHINGE.7 WTC1239RR 8.9 WTC1230LR 6.7 WTC1239LR 8.9 WTC1230RL 6.1 WTC1236LR 8.6 WTC1233LR 7.6 WTC1233RR 7.9 WTC1233LL 7.4 WTC1242RR 9.TOP • MIP P • RD • *Available only on 12″ deep side of cabinet Construction Upgrades APC PE • Decorative Door Options ALF CG • CG.Model WALL TRANSITION CABINET.7 WTC1239RL 8.BTM MD.7 WTC1242LL 9.4 WTC1242LR 9.4 12” 24” 12” 24” 135° 39” or 42” 45° 225° Top View 12” 17” Diagonal Front Width • Specify door hinging. or 42″ HIGH 12” 30” 33” or 36” LL RR (shown) LR RL 12” 17” (Diagonal Front Width) 138 12” Hinging Options Cubic Feet WTC1230LL 6. 2014 .4 WTC1242RL 9.6 WTC1233RL 7. Custom Modifications AUTHL ADDTK AUTHR •* CBO CCO CFNTO • • • FB FFDL FFDR FPEB • •* •* ID INVFRM CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. or 60″ HIGH 12” 24” 15” Frame Opening Height 48” 51” or 54” 27”.0 STWTC1260RR 7. 30”.0 STWTC1251RL 6. see page 406. 57″. • Depth can be reduced to a minimum of 18″. Custom Modifications AUTHL ADDTK AUTHR •* CBO CCO CFNTO • • • FB FFDL FFDR FPEB STD •* •* ID CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. RR shown.7 STWTC1260LL 7.7 STWTC1248RL 5.0 STWTC1251LR 6.0 STWTC1260LR 7. 51″.4 STWTC1254LR 6.7 STWTC1257RR 6.4 STWTC1254RL 6. or 33” Frame Opening Height 12” LL RR (shown) LR RL Hinging Options 17” Diagonal Front Width 12” Cubic Feet STWTC1248LL 5.7 STWTC1248LR 5. 54″.0 139 12” 24” 12” 15” Frame Opening Height 24” 135° 45° 57” or 60” 225° 12” 17” Diagonal Front Width • Specify door hinging.7 STWTC1257RL 6.0 STWTC1254LL 6.BTM MD.7 STWTC1257LR 6. 48″.TOP • • WALL CABINETS Top View 36” or 39” Frame Opening Height Effective March 17. • Full overlay styles use 38NPOHINGE.4 STWTC1254RR 6.4 STWTC1257LL 6. 2014 .7 STWTC1248RR 5.BTM CG.0 STWTC1260RL 7.Model STACKED WALL TRANSITION CABINET.0 STWTC1251RR 6.TOP • INVFRM MIP • • P RD • *Available only on 12″ deep side of cabinet Construction Upgrades APC • 3/4X PE • Decorative Door Options ALF CG CG.7 STWTC1251LL 6. BTM CG.0 • Includes one 3/4″ shelf with six mounting screws.BTM CG.TOP • WALL CABINETS STD INVFRM CFP Effective March 17. Microwave shelf extends beyond the front of the cabinet by 6 1/2″.TOP STD Decorative Door Options ALF CG CG.TOP STD WALL MICROWAVE DOUBLE DOOR CABINET. shelf will not be included with cabinet. for a total shelf depth of 18 1/2″. • Cabinet interior finished to match cabinet face frame. 36″ HIGH 27” or 30” 12” Frame Opening Height 36” MW2736 Opening: 24″ w x 18″ h Cabinet: 27″ w x 36″ h 181/2” 12” MW3036 Opening: 27″ w x 18″ h Cabinet: 30″ w x 36″ h MW2736 6. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO 3/4X CFP STD CFRMO CND • FPEB ID • • INVFRM MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.8 MW3036 10. Microwave shelf extends beyond the front of the cabinet by 6 1/2″.BTM MD.0 Opening: 24″ w x 14 1/4″ h Cabinet: 27″ w x 18″ h 18” or 21” 12” MW3018 Opening: 27″ w x 14 1/4″ h Cabinet: 30″ w x 18″ h 18 1 /2” MW2721 Opening: 24″ w x 17 1/4″ h Cabinet: 27″ w x 21″ h MW3021 Opening: 27″ w x 17 1/4″ h Cabinet: 30″ w x 21″ h 140 • Includes one 3/4″ shelf with six mounting screws. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO CFNTO • • • FPEB ID • • Construction Upgrades APC 3/4X PE CFRMO CND • MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.6 MW3018 6.BTM MD. • Cabinet interior finished to match cabinet face frame. • If ordered with Heirlooming Technique. will not feature sand-through characteristics.9 MW2721 5. 18″ or 21″ HIGH MW2718 Cubic Feet MW2718 4.TOP STD Decorative Door Options Construction Upgrades APC CFNTO ALF PE CG CG.Model WALL MICROWAVE CABINET. • Microwave cabinet must be attached to wall stud and adjacent cabinets on both sides for support. shelf will not be included with cabinet. • When ID is ordered. • Microwave cabinet must be attached to wall stud and adjacent cabinets on both sides for support. • When ID is ordered. 2014 . for a total shelf depth of 18 1/2″.4 MW3021 8. except with FPEB.8 WBMW301821 8. • If ordered with Heirlooming Technique.2 WBMW272121 8.TOP STD WALL CABINETS 18” or 21” Effective March 17.5 6” 18” or 21” 3” 3” 3” 30” 27” or Model 2718 2721 3018 3021 Factory Opening 21W x 9H 21W x 12H 24W x 9H 24W x 12H Maximum Cut Out 25 1/4W x 15H 25 1/4W x 18H 28 1/4W x 15H 28 1/4W x 18H 141 • Two 1/4″ fillers included.4 WBMW302118 8.9 WBMW272118 5.Model WALL BUILT-IN MICROWAVE CABINET. will not feature sand-through characteristics. and AUTHR. AUTHL.BTM MD. 2014 .TOP • Decorative Door Options ALF CG CG. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO • 3/4X CFNTO CFP STD ID • • PE CFRMO CND • FPEB Construction Upgrades APC CCO INVFRM MIP P • RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.0 WBMW271821 6.BTM CG.6 WBMW301818 6. 18″ or 21″ HIGH Cubic Feet WBMW271818 4.4 WBMW302121 9. BTM MD. 2014 . 36″.BTM CG.0 WBMW304218 15.0 WBMW303921 18.5 WBMW303918 14.3 WBMW273918 13.4 WBMW303621 15.8 WBMW273921 15. except with FPEB. WBMW273921 WBMW303921 Custom Modifications 27” or 30” 18” Frame Opening Height AUTHL ADDTK AUTHR CBO • CCO CFNTO CFP CFRMO • CND EXB • • • TD TVRAV TVRFV TVRVV MD MD.4 WBMW274221 13.2 WBMW304221 17. • Microwave cabinet must be attached to wall stud and adjacent cabinets on both sides for support.TOP • 18” 9” 21” MAX CUTOUT 25 1/4” X 19 3/4” (SHADED) 3” 18” 9” 24” 10 1/2” 3” WBMW303918 WBMW303921 MAX CUTOUT 28 1/4” X 19 3/4” (SHADED) 9” 24” 10 1/2” MAX CUTOUT 28 1/4” X 19 3/4” (SHADED) 3” WBMW304218 WBMW304221 WALL CABINETS MAX CUTOUT 28 1/4” X 19 3/4” (SHADED) MAX CUTOUT 25 1/4” X 19 3/4” (SHADED) WBMW274218 WBMW274221 15” 9” 9” 21” 10 1/2” WBMW273918 WBMW273921 12” WBMW303618 WBMW303621 CG 3” WBMW273618 WBMW273621 3” ALF 10 1/2” 3” 10 1/2” • 15” 9” 24” RD Decorative Door Options PE 12” 10 1/2” P • STD 21” MIP EXL EXR Effective March 17.1 27” or 30” 12” Frame Opening Height 36” 9” 3” 3” 142 3” 18” or 21” WBMW273618 WBMW303618 WBMW273621 WBMW303621 27” or 30” 15” Frame Opening Height 39” 9” 3” 3” 3” 18” or 21” WBMW273918 WBMW303918 • Two 1/4″ fillers included.Model WALL BUILT-IN MICROWAVE DOUBLE DOOR CABINET.TOP 42” 9” FB 3” STD 3” FPEB ID • • Construction Upgrades 18” or 21” 3” WBMW274218 WBMW304218 WBMW274221 WBMW304221 Model 2736 2739 2742 3036 3039 3042 FFDL FFDR APC Factory Opening 21W x 10 1/2H 21W x 10 1/2H 21W x 10 1/2H 24W x 10 1/2H 24W x 10 1/2H 24W x 10 1/2H 3/4X • Maximum Cut Out 25 1/4W x 19 3/4H 25 1/4W x 19 3/4H 25 1/4W x 19 3/4H 28 1/4W x 19 3/4H 28 1/4W x 19 3/4H 28 1/4W x 19 3/4H INVFRM MAX CUTOUT 25 1/4” X 19 3/4” (SHADED) CG. 39″.5 WBMW273621 11. or 42″ HIGH. AUTHL. 18″ or 21″ DEEP Cubic Feet WBMW273618 12.1 WBMW303618 13. and AUTHR.9 WBMW274218 14. • Top and inside are Maple or White laminate.Model WALL COOKBOOK AND RECIPE ORGANIZER.TOP STD WALL CABINETS 12” Effective March 17.BTM MD. will not feature sand-through characteristics.TOP 21” FB FFDL FFDR • FPEB ID 3/4X • STRAIGHT TAMBOUR.3 ST21 3.3 ST33 5.3 • 18” 18” 12” • Cabinet has back and top. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO • • FPEB ID • • Construction Upgrades APC • 3/4X PE CFNTO CFP CFRMO CND • INVFRM MIP P • RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. Custom Modifications 30” AUTHL ADDTK AUTHR • 12” • CBO CCO CFNTO • • • CFP CFRMO CND • EXB • • TD TVRAV TVRFV TVRVV MD MD. 18″ HIGH.BTM CG. • Recipe card drawer is designed to hold 4″ x 6″ cards. 30″ HIGH.BTM MD.BTM CG. 12″ DEEP Cubic Feet 6.TOP • Decorative Door Options ALF CG CG. 12″ DEEP MIP P RD 143 • Decorative Door Options Construction Upgrades APC INVFRM EXL EXR ALF PE CG CG.1 WCRO2130 L or R • Recipe organizer insert and recipe card drawer feature 1/2″ solid hardwood construction with a natural wood finish. • If ordered with Heirlooming Technique. • Recommended under cabinet accessories sold separately.TOP • • ST18 3.8 ST30 5.8 ST36 6. 2014 .3 ST27 4.8 ST24 4. See Cookbook Rack (CBR) and Tablet Holder (TABLETHLDR) on pages 402 and 408. 2 WAGD33 5. If ordered with Heirlooming Technique. Custom Modifications AUTHL ADDTK AUTHR • FB FFDL FFDR STD CBO CCO • • FPEB PE CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV INVFRM MIP P RD MD MD.8 WAGD18 L or R 3. 18″ HIGH. Cabinet has partial top and no floor.BTM CG.TOP STD WALL CABINETS • 3/4X CFP • • Construction Upgrades APC ID CFNTO Effective March 17.TOP • STD CT2424 7. will not feature sand-through characteristics. 21”.3 WAGD21 L or R 3.3 24” or 27” 18” 18” 12” or 15” CFRMO Decorative Door Options Construction Upgrades APC INVFRM CFP 12” or 15” • • • • • • CT2424 requires 24″ x 24″ corner wall space. 33”.8 CT2727 8.BTM MD. 27”.3 WAGD15 L or R 2. CT2727 requires 27″ x 27″ corner wall space. 2014 . Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR STD CCO CFNTO • • FPEB ID • • 3/4X • CORNER TAMBOUR.2 24”. 12″ DEEP 12”. Cabinet is designed to fit beneath Diagonal Wall Cabinets. 30”. and finished exterior.3 WAGD24 4. • Inside is Maple or White laminate and finished exterior.BTM CG. 15”.7 WAGD30 5.TOP • ALF PE CG CG.7 WAGD36 6. Inside is Maple or White laminate.3 WAGD27 4.TOP • Decorative Door Options ALF CG CG.8 WAGD24 L or R 4. 18″ HIGH 24” or 27” CND • MIP P RD • EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 18”. or 24” 18” 12” Cubic Feet WAGD12 L or R 2.Model WALL APPLIANCE GARAGE DOOR.BTM MD. or 36” 144 18” 12” • Cabinet does not have floor. 18″ HIGH 7.TOP • MIP P RD • Decorative Door Options ALF CG CG. CD2727 L or R requires 27″ x 27″ corner wall space. 2014 .Model CORNER DOOR.8 CD2727 L or R 8. Cabinet is designed to fit beneath Diagonal Wall Cabinets. and finished exterior.BTM CG. Cabinet has partial top and no floor. Inside is Maple or White laminate.3 24” or 27” 18” 18” 12” or 15” CD2424 L or R 12” or 15” • • • • • • CD2424 L or R requires 24″ x 24″ corner wall space. Door will always be square. Custom Modifications AUTHL ADDTK AUTHR CBO • FB FFDL FFDR STD FPEB • CFNTO • • ID INVFRM • Construction Upgrades APC CCO 3/4X PE CFP CFRMO CND 145 EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.TOP STD WALL CABINETS 24” or 27” Cubic Feet Effective March 17.BTM MD. • In order to allow proper clearance for opening and closing. • If used at the end of a run or next to an appliance.3 • Recommend installation between two cabinets. an End Panel must be installed on the pull-out adjacent to the end of run/appliance.3 • Recommend installation between two cabinets.6 WBCPO630FF (Fluted) 1.6 WBCPO630 (Plain) 1. do not install against a wall or next to deeper appliances and cabinets. allow an additional 1/8″ space between adjacent cabinet face frames. an End Panel must be installed on the pull-out adjacent to the end of run/appliance. The 3″ wide pull-outs require 3 1/8″ space and the 6″ wide pull-outs require 6 1/8″ space. WALL CABINETS MODIFICATIONS No modifications available for these products. Can be installed on the end of a run with the use of an end panel (recommend WEP1230WD and WEP1230LAM).Model WALL BOX COLUMN PULL-OUT 3” or 6” Interior Widths 13/4” or 43/4” 30” 146 111/8” Pull-out Interior Depth 87/8” Top View PLAIN 3” or 6” Interior Widths 13/4” or 43/4” 30” 111/8” Pull-out Interior Depth 87/8” Top View OVERLAY 3” or 6” Interior Widths 13/4” or 43/4” 30” 111/8” Pull-out Interior Depth 87/8” FLUTED Top View Cubic Feet WBCPO330 (Plain) 0. Can be installed on the end of a run with the use of an end panel (recommend WEP1230WD and WEP1230LAM). • Cannot be installed between cabinets with Authentic Ends. The 3″ wide pull-outs require 3 1/8″ space and the 6″ wide pull-outs require 6 1/8″ space. • For full access from both sides of unit. allow an additional 1/8″ space between adjacent cabinet face frames. will not feature sand-through characteristics. • For full access from both sides of unit. • If ordered with Heirlooming Technique. WBCPO330FF (Fluted) 0. Spacers are included with the pull-outs to allow for proper installation. • In order to allow proper clearance for opening and closing. • All styles feature a natural finish full extension wood pull-out with adjustable shelves and chrome rail sides. Effective March 17. • For full access from both sides of unit. • In order to allow proper clearance for opening and closing.6 WBCPO630OL (Overlay) 1. • If used at the end of a run or next to an appliance. Spacers are included with the pull-outs to allow for proper installation. Spacers are included with the pull-outs to allow for proper installation. do not install against a wall or next to deeper appliances and cabinets. do not install against a wall or next to deeper appliances and cabinets. an End Panel must be installed on the pull-out adjacent to the end of run/appliance. • All styles feature a natural finish full extension wood pull-out with adjustable shelves and chrome rail sides. The 3″ wide pull-outs require 3 1/8″ space and the 6″ wide pull-outs require 6 1/8″ space. allow an additional 1/8″ space between adjacent cabinet face frames. Can be installed on the end of a run with the use of an end panel (recommend WEP1230WD and WEP1230LAM). WBCPO330OL (Overlay) 0. 2014 . • All styles feature a natural finish full extension wood pull-out with adjustable shelves and chrome rail sides. • Overlay application includes profiled full overlay filler. • Cannot be installed between cabinets with Authentic Ends. • If used at the end of a run or next to an appliance.3 • Recommend installation between two cabinets. • Cannot be installed between cabinets with Authentic Ends. or 42″ HIGH Cubic Feet WSP930 2. do not install against a wall or next to deeper appliances and cabinets. Wood plugs for top of 30″ high pull-out included for field installation. Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR • CBO CCO • • FPEB • 3/4X PE CFP CFRMO CND • INVFRM • Construction Upgrades APC ID CFNTO MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. full extension wood pull-out with three adjustable shelves.7 WSP942 4. full extension wood pull-out with three adjustable shelves.9 WSP1230 3. • Wire for top rail on 36″ to 42″ high pull-out included separately for field installation.TOP • WALL CABINETS 12” 147 Effective March 17. 36″. 2014 .7 WSP1239 4. and chrome finish rail sides. 36″ to 42″ high units include a natural finish. two fixed shelves. 39″.1 9” or 12” 30” or 33” 12” 9” or 12” 36” 39” or 42” • • • • 30″ and 33″ high units include a natural finish.7 WSP933 3.2 WSP1233 4. Addison door panels on 9″ wide units will feature a unique raised profile due to the narrow panel width.BTM MD.TOP • Decorative Door Options ALF CG CG.BTM CG. 33″. and chrome finish rail sides. • For full access from both sides of unit. one fixed shelf. 30″.Model WALL SPICE PULL-OUT.1 WSP936 3.4 WSP939 3.5 WSP1236 4.0 WSP1242 5. Maximum Weight Capacity for Shelf Pull Down: 26 lbs. 24″.TOP • + Not available on 15″ high Decorative Door Options Construction Upgrades 3/4X CFRMO • *Not available on 15″.TOP •† • • † Not available on 15″.Model WALL SPICE PULL DOWN 18” 18” 24” or 27” 15” 18” or 21” 12” 12” Cubic Feet W1815SPD L or R 2.TOP • Effective March 17. Clearance dimensions: 19 3/8″ high x 15 3/8″ wide.7 W1824SPD L or R 4. Custom Modifications WALL CABINETS AUTHL ADDTK AUTHR FB FFDL FFDR • CBO CCO CFNTO • • • FPEB Construction Upgrades APC • ID INVFRM • 3/4X PE • CFP CFRMO CND • MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 18″.BTM MD.6 W1842SPD L or R 7.1 18” 148 18” 39” or 42” 30” 33” or 36” 12” 12” • • • • Spice Rack Pull Down dimensions: 8 15/16″ high x 14 13/16″ wide x 10 5/16″ deep.0 W3627SHLFPD 9.3 W3630SHLFPD 10. 2014 .8 W1818SPD L or R 3.9 Shelf Pull Down dimensions: 18 11/64″ high x 28 1/4″ wide x 8 1/2″ deep. or 27″ high NEW WALL SHELF PULL DOWN 36” 12” 231/2” or 271/2” 93/8” 153/8” 36” 30” 33” 36” 39” or 42” 12” • • • • • • • W3624SHLFPD 8.7 W1830SPD L or R 5. or 21″ high APC CFP ALF PE CG CG.0 W3633SHLFPD 10.2 W1833SPD L or R 5.BTM CG. When Increased Depth (ID) is ordered.7 W1836SPD L or R 6. insert will not increase in size.BTM MD. insert will not increase in size.8 W3639SHLFPD 11.2 W1827SPD L or R 4. Custom Modifications AUTHL ADDTK AUTHR • CBO CCO CFNTO •* • • FB FFDL FFDR FPEB ID • •+ • • • CND INVFRM MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.9 W3642SHLFPD 13. When Increased Depth (ID) is ordered.BTM CG.3 W3636SHLFPD 11. Maximum Weight Capacity for Spice Rack Pull Down: 15 lbs.2 W1839SPD L or R 6. 30″ to 42″ high units will have one adjustable shelf above pull-down unit.2 W1821SPD L or R 3. Interior dimensions of pull down trays: 11 3/4″ wide x 3″ deep.TOP • Decorative Door Options ALF CG • CG. Interior dimensions of pull down trays: 28 1/4″ wide x 8 1/2″ deep. Upper shelf is adjustable in one increment of 2 inches. Model WALL SPICE RACK CABINET.TOP • WALL CABINETS 12” Effective March 17.BTM MD. 36″.2 WSR1839 L or R 6. Maximum Weight Capacity for Spice Rack Shelves: 15 lbs. Custom Modifications 13” 6” AUTHL ADDTK AUTHR 39” or 42” 26” 12” 16” • FB 6” • FFDL FFDR • CBO CCO CFNTO • • • FPEB ID • • Construction Upgrades APC • 3/4X PE • INVFRM CFP CFRMO CND • MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.3 WSR2142 L or R 8.BTM CG.1 WSR1833 L or R 5. wood insert will not increase in size.3 WSR2130 L or R 6.TOP • Decorative Door Options ALF CG • CG. 33″. 39″. 30″. Field installed swing-out has three adjustable and one fixed bottom shelf with chrome finish wire rail sides. WSR21 wood insert is 26″ high x 16″ wide x 6″ deep.8 WSR2139 L or R 7.3 18” 30” or 33” 26” 21” 12” 13” 6” 30” or 33” 26” 18” 12” 36” 26” 12” 13” 6” 16” 6” 21” 36” 26” 18” 12” 39” or 42” 26” 16” 149 • • • • • 6” 21” Shelves are 4 1/2″ deep. 2014 . Dimensions: WSR18 wood insert is 26″ high x 13″ wide x 6″ deep.3 WSR2136 L or R 7. or 42″ HIGH Cubic Feet WSR1830 L or R 5.7 WSR1836 L or R 6.9 WSR2133 L or R 6. When Increased Depth (ID) is ordered.8 WSR1842 L or R 7. 0 WOCP3036 9. 30”.5 24”.BTM CG. or Straight Valance (TVRVV). Face frame has a profiled inside edge.1 WOCP3633 10.TOP MD MD.8 WOCP2436 8.9 WOCP2433 7.3 WOCP3630 9.Model WALL OPEN CABINET with PLAIN BACK .6 WOCP3639 12.6 WOCP3039 10.9 WOCP3636 11.7 WOCP2442 9. 30”.4 WOCP3642 13. Hardwood veneer plywood. 36″. 39″. or 36” Cubic Feet WOCP2430 6. To change the top rail valance. or 36” 30” 33” or 36” 150 12” 39” or 42” 12” • • • • • Cabinet interior and adjustable shelves finished to match cabinet face frame. 2014 . Furniture (TVRFV).TOP WALL CABINETS STD Effective March 17.BTM MD. specify one of the following modifications: Arch (TVRAV).7 WOCP2439 8. will not feature sand-through characteristics. or 42″ HIGH 24”. If ordered with Heirlooming Technique.7 WOCP3030 8. 33″. 30″.4 WOCP3033 9. Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD CBO 3/4X CFNTO CFP STD ID • • PE CFRMO CND • FPEB Construction Upgrades APC CCO INVFRM MIP P RD STD • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV • Decorative Door Options ALF CG CG.3 WOCP3042 11. BTM CG. Complete rack assembly is removable.TOP STD WALL CHINA DISPLAY.0 WCD3015 4. or 36” 24”. Hardwood veneer plywood.TOP STD Effective March 17. 33″. 1 1/2″ apart. or Straight Valance (TVRVV). will not feature sand-through characteristics.0 WOCB2433 7.Model WALL OPEN CABINET with BEADED BACK .TOP MD MD. Individual dowels are not removable. Face frame has a profiled inside edge.4 WOCB3642 13.3 WOCB3042 11. Hardwood veneer plywood.4 WOCB3033 9. Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD CBO CCO 3/4X CFP STD CFRMO CND • FPEB ID • • INVFRM MIP P RD STD • • EXB EXL EXR • • TD TVRAV TVRFV TVRVV • Decorative Door Options Construction Upgrades APC CFNTO ALF PE CG CG.BTM CG. To change the top rail valance.1 WOCB3633 10. 30″.5 WOCB3630 10.8 WOCB2436 8. specify one of the following modifications: Arch (TVRAV).0 WOCB3036 9.BTM MD. 30”.9 WOCB3636 11.5 WCD3615 6. Beaded back panel is hardwood veneer on furniture board core.9 WOCB3030 8.7 WOCB2442 9.BTM MD. Matching interior. If ordered with Heirlooming Technique. 36″. 30”.0 Vertical dowels are 3/8″ diameter.6 WOCB3639 12. or 36” 39” or 42” 30” 33” or 36” 12” 12” • • • • • • 151 Cabinet interior and adjustable shelves finished to match cabinet face frame. will not feature sand-through characteristics. Custom Modifications AUTHL ADDTK AUTHR • FB CBO CFNTO CFP STD FFDL FFDR STD FPEB 3/4X PE CFRMO CND • ID INVFRM • Construction Upgrades APC CCO MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. 15″ HIGH • • • • • 12” SKU WCD2415 WCD3015 WCD3615 # of Plates 10 13 16 3. 2014 WALL CABINETS 15” WCD2415 . 39″.5 24”.TOP STD Decorative Door Options ALF CG CG. or 42″ HIGH Cubic Feet WOCB2430 6.7 WOCB2439 8. Furniture (TVRFV).6 WOCB3039 10. If ordered with Heirlooming Technique. 4 WCD3633 11. 30″.4 WCD3042 11.9 WCD3030 8. 36″.8 Vertical dowels are 3/8″ diameter. 39″.Model WALL CHINA DISPLAY with DOORS.2 WCD2436 8. Matching interior.5 WCD3630 10.0 WCD2433 7. 2014 .BTM CG. Custom Modifications AUTHL ADDTK AUTHR • FB • FFDL FFDR STD CBO CCO CFNTO • •* • FPEB ID INVFRM • CFP CFRMO CND • MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD.TOP • WALL CABINETS STD Decorative Door Options Effective March 17. 33″.8 WCD3039 10.6 WCD3642 13.9 WCD2439 8.2 WCD3036 10.0 WCD3636 11. or 42″ HIGH 30” 33” or 36” 12” 152 39” or 42” 12” SKU WCD2430 WCD3030 WCD3630 WCD2433 WCD3033 WCD3633 WCD2436 WCD3036 WCD3636 WCD2439 WCD3039 WCD3639 WCD2442 WCD3042 WCD3642 # of Plates 10 13 16 10 13 16 10 13 16 10 13 16 10 13 16 • • • • • Cubic Feet WCD2430 6. China display section has 12″ frame opening height.5 WCD2442 9.BTM MD. 1 1/2″ apart.6 WCD3033 9. Complete rack assembly is removable. Hardwood veneer plywood.TOP STD *Available only on 39″ and 42″ high Construction Upgrades APC 3/4X PE ALF CG CG.8 WCD3639 12. Individual dowels are not removable. 8 WNR3618 6. 21”.3 WNR2130 6.Model WALL WINE RACK. will not feature sand-through characteristics. or 30″ HIGH 15” 12” 18” Cubic Feet WNR3015 4.6 WSC151512 2.TOP STD Decorative Door Options Construction Upgrades APC CFNTO ALF PE CG CG.3 WNR3318 5.5 WNR3315 4. Hardwood veneer plywood with solid wood lattice work.TOP STD WALL CABINETS SKU WSC121212 WSC151512 WSC181812 WSC181818 WSC212112 WSC242412 • • • • • WSC121212 Effective March 17.BTM CG. ‘‘X’’ shelf configuration cannot be removed. 18″. Custom Modifications AUTHL ADDTK AUTHR FB FFDL FFDR STD* CBO FPEB CCO ID CFNTO INVFRM • CFP MIP CFRMO CND P STD RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. 12″. will not feature sand-through characteristics. WSC181818 includes two 1/4″ space fillers shipped unattached. Wine bottle opening 4″ x 4″. When depth is reduced.3 WSC242412 5. or 23 1/2″ HIGH 12”. 18”.4 WNR3018 5.TOP STD WINE STORAGE CABINET. Matching interior. If ordered with Heirlooming Technique. 15″. 15″. Reduced depth not recommended for safe wine bottle storage.5 WNR1830 5. or 231/2” 12” or 18” # of Bottles 4 10 18 18 24 32 1.TOP • *Available only on 18″ high Construction Upgrades APC 3/4X PE Decorative Door Options ALF CG CG. 21″. or 231/2” 12”.3 WNR1530 4. 21”. or mounted to a horizontal surface.1 12” 30” 12” SKU WNR3015 WNR3315 WNR3615 WNR3018 WNR3318 WNR3618 WNR1530 WNR1830 WNR2130 # of Bottles 11 13 13 11 13 13 11 11 11 • • • • • 153 Cabinet interior finished to match cabinet face frame. 18”.2 WSC181818 4.BTM MD.5 Must be installed between two cabinets. 2014 . Custom Modifications AUTHL ADDTK AUTHR • FB CBO CCO CFP STD FFDL FFDR FPEB STD ID INVFRM • 3/4X CFRMO CND • MIP P RD EXB EXL EXR • • TD TVRAV TVRFV TVRVV MD MD. If ordered with Heirlooming Technique.BTM MD.3 WSC212112 4. between a cabinet and a wall.BTM CG.3 WSC181812 3. 18″. 15”. 15”.9 WNR3615 5. fillers are not included. BTM MD. Frameless construction.BTM MD.0 Hardwood veneer on 3/4″ furniture board core. or 42″ WIDE.TOP 42” 6” 41/2” W642 12” FB FFDL FFDR FPEB STD 51/8” ID WALL ORGANIZER. 30″. Increased Depth only available in 3″ increments.8 W630 (5 openings) 2. 24″. Matching interior. Frameless construction. 36″. Increased Depth only available in 3″ increments.7 P RD CG.2 W636 (6 openings) 2. a 1/2″ gap will show between top of wall wine cubby and cabinet. If ordered with Heirlooming Technique.BTM CG.2 WO36 2. 6″ HIGH 24” 12” WO24 6” 30” 12” WO30 6” 36” • • • • • 3/4X 6” ALF PE CG WO24 1. will not feature sand-through characteristics.7 W642 (7 openings) 3. 30″. will not feature sand-through characteristics.TOP WO36 FB FFDL FFDR FPEB STD INVFRM MIP P RD • Construction Upgrades 3/4X PE Decorative Door Options ALF CG CG. Custom Modifications AUTHL ADDTK AUTHR 12” MIP Decorative Door Options Construction Upgrades APC INVFRM • CBO CCO CFNTO CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.Model WALL WINE CUBBY. When 24″ unit is turned vertically.8 WO30 2. If ordered with Heirlooming Technique. Custom Modifications 36” 6” 41/2” 12" • • • • • • Cubic Feet W636 AUTHL ADDTK AUTHR 51/8” CBO CCO CFNTO CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. Matching interior. 1/2″ filler available on page 357. 2014 . 6″ HIGH 24” 6” 41/2” 12” W624 51/8” 30” 6” W630 41/2” 12” 154 51/8” W624 (4 openings) 1.TOP Hardwood veneer on a 3/4″ furniture board core. 24″. or 36″ WIDE.TOP WALL CABINETS APC ID Effective March 17.BTM CG. BTM MD. Requires 24″ x 24″ corner wall space. 2014 . 6” 41 / 2 ” AUTHL ADDTK AUTHR CBO CCO CFNTO CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD.2 lbs. Cartright.7 WSD42 (7 drawers) 3. Once installed. • Hardwood veneer on 3/4″ furniture board core. • Frameless construction. and ends. 30″. Benson.TOP • Not available in Hickory.0 FS42 1. back. 3/8″ thick veneered plywood top and bottom. Matching interior. • Increased Depth only available in 3″ increments. Montgomery. will not feature rustic characteristics.TOP WSD42 51/8” FB FFDL FFDR FPEB STD ID APC FLOATING SHELVES 21/2” FS24 24” 21/2” FS30 30” 10” 21/2” 36” INVFRM MIP P RD • Construction Upgrades 10” 155 Custom Modifications 42” 12” Cubic Feet 3/4X Decorative Door Options PE ALF CG FS24 0.BTM CG. designed to mount under Easy Reach or Corner Cabinet. MODIFICATIONS FS36 No modifications available for these products.2 CG. • Buchanon PureStyle™ drawer fronts will be painted hardwood and do not feature glaze detail. • Includes solid wood mounting system. Front and ends are mitered together. 10” 21/2” 42” FS42 10” WCS2424 24” 10” 24” • • • • • 4. • Maximum Weight Capacity per shelf: 24″ = 30 lbs.9 FS36 1. 36″. • Matching interior. Top is open. • 1/2″ hardwood drawer with rabbet joint. Effective March 17. and floating shelf frame. 36″ = 45 lbs. • 3/4″ thick solid wood front.Model WALL SPICE DRAWER. Breman.7 Bottom shelf depth is 3″. which use the shaker profile. Sumner and Trystan. or 42″ WIDE.5 lbs. 6″ HIGH 24” 6” 41/2” WSD24 12” 51/8” 55/8” 55/8” 30” 6” 41/2” 12” WSD30 51/8” 36” 6” 3/4” 3/4” standard profile shaker profile 41/2” 12” WSD36 51/8” WSD24 (4 drawers) 1. • All styles use standard drawer front profile except Anden.8 WSD30 (5 drawers) 2. mounting system is fully concealed. mounting hardware. 30″ = 37. 24″.2 WSD36 (6 drawers) 2. 3/4″ hardwood end panel and shelf with 3/8″ plywood back panel.0 • Drawer front is unique to item and will not match profile chosen. MODIFICATIONS WALL CABINETS WALL CORNER DECORATIVE SHELF No modifications available for these products. Leeton.7 FS30 0. Caldera. 42″ = 52. • Horizontal application only. • When ordered in Rustic Alder door styles. LaGrange. Liberty. 2014 .9 WMC1236 L or R 2. 42”. or 293/8” 24 /8” 7 3311/16”.TOP • Decorative Door Options PE ALF CG CG. or 4511/16” 9” WALL CABINETS 383/8”. 3″ DEEP 12” 30” 33” or 36” • • • • • • • 3” WMC1230 L or R WMC1233 L or R WMC1236 L or R WMC1230 L or R 1. 443/8”. pencil holder. Custom Modifications AUTHL ADDTK AUTHR 12” FB FFDL FFDR STD 39” or 42” CBO CCO • • FPEB ID INVFRM STD Construction Upgrades APC CFNTO 3/4X CFP MIP CFRMO CND P RD EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. or 48” • • • • • • • • • WHA36 14. Liner opening size: 10 1/4″ deep by 19 1/2″ wide. Wood hoods ordered in Rustic Alder will not feature Rustic characteristics. and fixed plexi-glass fronted shelves. 24 7/8″ HIGH 173/8”. Matching interior. For proper installation. Effective March 17. 42″. WMC1230. and WMC1236 have 2 fixed shelves.7 WS18 2.0 WHA48 18. 33″. Not available next to a Peninsula Cabinet. adjacent cabinet must have FPEB or 1/4″ skin applied.8 Bottom shelf depth is 3″. key hooks.2 WS36 3.8 WMC1233 L or R 1.BTM MD. Embellishments or overlay fillers can be used on side of cabinet to add a decorative touch.BTM CG. or 42″ HIGH. Cabinet should be hinged on wall side. Exhaust system not included. MODIFICATIONS No modifications available for these products. Check your local building code for installation heights above the range. or 48″ WIDE.6 WS30 3. Compatible with all Diamond blowers. Installation instructions and hardware included.3 WS24 2.. 30″. WALL MESSAGE CENTER. Top is open. 10″ HIGH 12” 10” • • • • 156 Model Cubic Feet WS12 1. Door will open 90° without decorative hardware. Assembly required.).0 WS21 2. 3/4″ hardwood end panel and shelf with 3/8″ plywood back panel. Silver metallic liner included. or 503/8” 19” Bottom to Peak of Arch is 21/8” 36”. 233/8”.9 Includes magnetic whiteboard on back of door. WMC1239 and WMC1242 have 3 fixed shelves. Chimney available (WHC. See below.WALL DECORATIVE SHELF.0 Freestanding unit (must be properly secured to wall and cannot be attached to adjacent cabinets).2 WMC1239 L or R 2. 3911/16”. 36″. 36″.5 WMC1242 L or R 2.0 WHA42 16. MODIFICATIONS No modifications available for these products. Arched raised panel valance front. designed to mount under wall cabinet. WMC1233 L or R.TOP • 3” WMC1239 L or R WMC1242 L or R WOOD HOOD ARCH. 39″.4 WS15 1. MODIFICATIONS 173/8”.). Assembly required. but wood hood design does not provide detail for glaze hang-up. 157 MODIFICATIONS No modifications available for these products. Installation instructions and hardware included. 443/8”.0 WHC48 5. Liner opening size: 10 1/4″ deep by 19 1/2″ wide.0 JWHL42 18. moulding is recommended to conceal any cut marks. Available in glaze finishes. Wood hoods ordered in Rustic Alder will not feature Rustic characteristics. Trimmable. moulding is recommended to cover any cut marks.0 3/4″ thick plywood.0 Wood hoods are designed for use with decorative overlays. Optional accessory for Wood Hood Square (WHS) and Wood Hood Arch (WHA). Check your local building code for installation heights above the range. Exhaust system not included. 3911/16”. 30”. or 42″ WIDE NEW 13” • • • • • • • • • 18” 42” JWHCONSTR30 18. Exhaust system not included. Liner opening size: 10 1/4″ deep by 19 1/2″ wide. or 293/8” 227/8” 3311/16”. Installation instructions and hardware included.1 JWHCONSTR36 18.1 Freestanding unit (must be properly secured to wall and cannot be attached to adjacent cabinets). Compatible with all Diamond blowers. Chimney included and can be trimmed. Chimney included and can be trimmed.0 JWHL36 16. WOOD HOOD CHIMNEY. 173/8”. Exhaust system not included. 36”. Compatible with all Diamond blowers. or 48″ WIDE. Wood hoods ordered in Rustic Alder will not feature Rustic characteristics. Available in glaze finishes. Silver metallic liner included. If trimmed.1 JWHCONSTR42 18. Freestanding unit (must be properly secured to wall and cannot be attached to adjacent cabinets). Liner opening size: 10 1/4″ deep by 19 1/2″ wide. Installation instructions and hardware included. Silver metallic liner included. 233/8”. Compatible with all Diamond blowers. Silver metallic liner included. or 4511/16” 6” 36”. See below. Wood hoods ordered in Rustic Alder will not feature Rustic characteristics. TAPERED. If trimmed. 36″. or 293/8” No modifications available for these products. 2014 WALL CABINETS No modifications available for these products.0 WHS48 16. Assembly required. or 48” 203/16” 383/8”. 81/2” . 23 1/2″ HIGH • • • • • 231/2” Trim to Fit 911/16” WHC36 3.0 Freestanding unit (must be properly secured to wall and cannot be attached to adjacent cabinets). or 423/16” WOOD HOOD LINEAR. or 42” 19” MODIFICATIONS No modifications available for these products. WOOD HOOD CONTEMPORARY STRAIGHT.. 30″. Effective March 17. but wood hood design does not provide detail for glaze hang-up. Check your local building code for installation heights above the range. 363/16”. Assembly required. 30″. Wood hoods ordered in Rustic Alder will not feature Rustic characteristics.WOOD HOOD SQUARE. 36″. Chimney available (WHC.0 WHS42 14. or 233/8” 231/2” 1613/16” 405/16” • • • • • • • • • JWHL30 14. 42″. 42”. 233/8”. MODIFICATIONS 191/16” 303/16”. Check your local building code for installation heights above the range. 22 7/8″ HIGH 173/8”.0 WHC42 4. or 503/8” • • • • • • • • • Model Cubic Feet WHS36 13. 36″. or 42″ WIDE 113/8”. Doors matching the style ordered will be installed on hood. Interior bottom section is finished below liner. Silver metallic liner included. Installation instructions and hardware included. Installation instructions and hardware included. Installation instructions and hardware included. see page 161. Check your local building code for installation heights above the range. Designed for use with FILTER250/390. 30″ or 36″ WIDE. Designed for use with FILTER250/390. Interior bottom section is finished below liner. Check your local building code for installation heights above the range. Exhaust system not included. Assembly required. 2014 . Exhaust system not included. Doors matching the style ordered will be installed on hood. Assembly required. Doors matching the style ordered will be installed on hood. Check your local building code for installation heights above the range.6 Install Wood Hoods between adjacent cabinets. only the doors will have Rustic characteristics. Silver metallic liner included.6 Install Wood Hoods between adjacent cabinets. 63/16” WOOD HOOD CANOPY SQUARE.6 Install Wood Hoods between adjacent cabinets. Arched raised panel valance front. Assembly required. Installation instructions and hardware included. Liner opening size: 10 1/4″ deep by 19 1/2″ wide.7 WHCA36 5. Filter is not required unless using a ductless conversion kit. 30″ or 36″ WIDE. Liner opening size: 10 1/4″ deep by 19 1/2″ wide. Silver metallic liner included. Exhaust system not included. Exhaust system not included.Model WOOD HOOD CANOPY ARCHED. MODIFICATIONS or 3513/16” No modifications available for these products.9 JWHCS3630 10. When ordered in Rustic Alder. only the doors will have Rustic characteristics. No modifications available for these products. only the doors will have Rustic characteristics. Interior bottom section is finished below liner. Liner is not arched. Check your local building code for installation heights above the range. 24″ HIGH 1 /2” 11/2” 30” or 36” or 15 2” 1/ 2” 12 11/2” 12” 158 • • • • • • • • • 24” 1 /2” 2 8” 63/16” WOOD HOOD CANOPY ARCHED. Liner opening size: 10 1/4″ deep by 19 1/2″ wide. 24″ HIGH 11/2” 1 /2” 30” or 36” or 15 2” 1/ 2” 12 11/2” 12” 24” 1 /2” 2 8” 55/16” • • • • • • • • ” 3 /16 31 r3 o ” 6 13 /1 27 299/16” or 3513/16” WHCS30 4.7 WHCS36 5. see CONVERSION on page 161. If ductless conversion kit required. Interior bottom section is finished below liner. Liner is not arched.6 Install Wood Hoods between adjacent cabinets. When ordered in Rustic Alder.9 JWHCA3630 10. Liner opening size: 10 1/4″ deep by 19 1/2″ wide. Assembly required. 30″ HIGH 11/2” 11/2” 18” 30” 21 / 4. When ordered in Rustic Alder. When ordered in Rustic Alder. 55/16” WOOD HOOD CANOPY SQUARE. MODIFICATIONS No modifications available for these products. 30″ or 36″ WIDE. If ductless conversion kit required. 55/16” ” WHCA30 MODIFICATIONS 2713/16” or 3313/16” 30” or 36” or 15 3” 12” Cubic Feet • • • • • • • • • • • JWHCA3030 8. Compatible with all Diamond blowers. 63/16” Effective March 17. Compatible with all Diamond blowers. Silver metallic liner included. Arched raised panel valance front. Compatible with all Diamond blowers. 30″ HIGH 11/2” ” 30” or 36” or 15 ” 3” 12 11/2” WALL CABINETS 18” 21 / o 6” 13 /1 27 2” 8” 55/16” 3 /16 31 r3 30” 299/16” ” • • • • • • • • • • JWHCS3030 8. see page 161. 2” 8” 63/16” MODIFICATIONS 2713/16” or 3313/16” No modifications available for these products. Doors matching the style ordered will be installed on hood. Filter is not required unless using a ductless conversion kit. Compatible with all Diamond blowers. only the doors will have Rustic characteristics. see CONVERSION on page 161. 30″ or 36″ WIDE. Kit includes: ceiling mounting board assembly. top trim mouldings. 42″.Model WOOD HOOD ISLAND ARCH. 3” 24” 6” (Inside of moulding to inside of moulding. Liner opening size. or 48″ WIDE 1111/16” • • • • • • 1711/16”. Silver metallic liner included. top trim mouldings. 30″ or 36″ WIDE.0 Check your local building codes for installation heights above the range. Exhaust system not included. 36″. 10 1/4″ D x 19 1/2″ W. Wood hoods ordered in Rustic Alder will not feature Rustic characteristics. back. and end panels. or 48” 313/4” 373/4”.0 Check your local building codes for installation heights above the range. Wood hoods ordered in Rustic Alder will not feature rustic characteristics.0 JWHIS48 25. 42”. outside corner mouldings. and end panels. spacers.7 TWH36 5.0 JWHIA42 22. Installation kit.0 JWHIA48 25. Compatible with all Diamond blowers. or 48” WOOD HOOD ISLAND SQUARE. or 2911/16” 3127/64” 227/8” JWHIS36 19. MODIFICATIONS 30” 3” No modifications available for these products. Compatible with all Diamond blowers. 42”. or 48″ WIDE 1111/16” • • • • • • 1711/16”.) 613/16” • • • • • • • • • TWH30 4. Liner opening size.0 JWHIS42 22. Silver metallic liner included. 24″ HIGH 30” 24” 6” (Inside of moulding to inside of moulding. Compatible with all Diamond blowers. instructions and hardware included. 10 1/4″ D x 19 1/2″ W.6 Wood hoods are designed for use with decorative overlays. or 493/4” TAPERED WOOD HOOD. Tapered design. front. not available for order separately. Exhaust system not included. assembly required. Installation kit. assembly required. 2311/16”. 30” 36”.) WALL CABINETS 613/16” Effective March 17. 10” 159 MODIFICATIONS No modifications available for these products. spacers. Check your local building code for installation heights above the range. Install Wood Hood between adjacent cabinets. 3127/64” 2311/16”. or 2911/16” 247/8” Cubic Feet JWHIA36 19. 8” MODIFICATIONS 30” No modifications available for these products. instructions and hardware included. TWH36 has two plain/fluted fillers and metal wings included to extend hood to 36″ width. back. Exhaust system not included. 42″. front. Kit includes: ceiling mounting board assembly. outside corner mouldings. Wood hoods ordered in Rustic Alder will not feature rustic characteristics. 36”. Silver metallic liner included. 36″. Liner opening size: 10 1/4″ deep x 19 1/2″ wide. 433/4”. 2014 . 000 BTUs.0 500 CFM. • Sound rating is 6 sones. 2014 .) Designed to work independently from internal blowers. MODIFICATIONS WALL CABINETS No modifications available for these products. Compatible with all Wood Hoods and Hearths. • Two 40 watt candelabra lights required. but not included. Professional installation required. Includes two removable dishwasher safe grease filters. Installation instructions. Satellite blower installs remotely in the interior of the home (i. Effective March 17. One year warranty. Ventilator housing unit features stainless steel finish.e. One year warranty. MODIFICATIONS No modifications available for these products. warranty. Sound rating is 8 sones. Installation instructions. Two 20 watt (12 volt. but not included. G4 base) halogen lamps included. • • • • • • • • • 2. Uses 2. and repair information included. • 1 year warranty. 1 year warranty. Designed for use in applications up to 110. • Uses 3. • 6″ diameter vent. Designed for use in applications up to 60. External ventilation required. Three speed push button control..Model BLOWER1100 WOOD HOOD BLOWER. warranty. 1100 CFM 18” 22” 18” 160 103/16” Cubic Feet • • • • • • • • • • • • • 197/16” 10. Includes two in-line transitions (8″ x 12″ to 10″ round).1 Range Hood Component Package has 2-speed single axial fan with lighted filter control. • Silver metallic exterior finish. MODIFICATIONS 8” No modifications available for these products.000 BTUs. Compatible with all Wood Hoods and Hearths. Silver metallic exterior finish. TWHBLOWER390 TAPERED WOOD HOOD BLOWER 103/16” 197/16” 95/8” TWHBLOWER250 TWHBLOWER390 103/16” 191/2” 21/2” TWHBLOWER250 2. Compatible with all Wood Hoods and Hearths. Two 40 watt candelabra lights required. Silver metallic finish.1 amps. and repair information included. 7″ diameter vent.7 1100 CFM. Two 50 watt (120 volt) halogen lamps included. Includes two removable dishwasher safe grease filters. Includes removable dishwasher safe grease filter.1 • Range Hood Component Package has 3-speed centrifugal fan and lighted filter control. • Compatible with all Wood Hoods and Hearths. 500 CFM 103/16” • • • • • • • • • 197/16” 5 7 /8 ” 9 5 /8 ” 4. 9 5 /8 ” BLOWER500 WOOD HOOD BLOWER. • Includes removable dishwasher safe grease filter. unfinished attic area.2 amps. (1) adjustable boot. (1) white metal soffit grille. WALL CABINETS CONVERSION Effective March 17.Model WOOD HOOD DUCTLESS CONVERSION KIT AND FILTER KITS 21” x 7” Round Pipe 7” x 6” Reducer • • • • Cubic Feet CONVERSION 2. FILTER500 required when CONVERSION is used with BLOWER500.5 FILTER500 0.5 Must order charcoal filter with CONVERSION kit for proper filtration to replace metal mesh filters included with blower unit. 2014 . (1) adjustable collar.0 FILTER250/390 0. (1) 7″ x 6″ reducer. FILTER250/390 required when CONVERSION is used with TWHBLOWER250/TWHBLOWER390. MODIFICATIONS 161 No modifications available for these products. CONVERSION includes: (1) 21″ x 7″ round pipe. and installation instructions. 6″ from non-combustible surfaces including the backsplash surface and 30″ from the vent. Reference local codes before installation. 3″.Corbels 21” Side View • Recommended clearance of 7″-12″ on each side of gas burner to combustible surface. 21″ DEEP A 9” D B E E 51” 51” C C 291/2” A .Piers D .Valance C . 21″ DEEP A A 6” HEARTHS D B E E 48” 48” C C 291/2” A . Reference local codes before installation. 51″ HIGH. 48″ HIGH. Hearth Width Pier (left) 48″ High Pier (right) Mantel Valance Corbel (2 Qty) Shelf Hood Liner Blower 48″ 54″ HP94821L or HPP94821 HP94821R or HPP94821 HM306 JRPV30 or JRCPV30 CORBELMIS9 or CORBELSCR9 HS48 HL30 HP94821L or HPP94821 HP94821R or HPP94821 HM366 JRPV36 or JRCPV36 CORBELMIS9 or CORBELSCR9 HS54 HL36 60″ 66″ HP94821L or HP94821L or HPP94821 HPP94821 HP94821R or HP94821R or HPP94821 HPP94821 HM426 HM486 JRPV42 or JRCPV42 JRPV48 or JRCPV48 CORBELMIS9 or CORBELMIS9 or CORBELSCR9 CORBELSCR9 HS60 HS66 HL42 HL48 All blowers are compatible 72″ 78″ HP94821L or HPP94821 HP94821R or HPP94821 HM546 JRPV54 or JRCPV54 CORBELMIS9 or CORBELSCR9 HS72 HL54 HP94821L or HPP94821 HP94821R or HPP94821 HM606 JRPV60 or JRCPV60 CORBELMIS9 or CORBELSCR9 HS78 HL60 HEARTH.Piers D .Corbels 162 21” • Recommended clearance of 7″-12″ on each side of gas burner to combustible surface.Recommended Hearth Components HEARTH. 2014 .Shelf E .Mantel B .Mantel B .6″ from non-combustible surfaces including the backsplash surface and 30″ from the vent.Valance C . 3″.Shelf E . Hearth Width Pier (left) 51″ High Pier (right) Mantel Valance Corbel (2 Qty) Shelf Hood Liner Blower 48″ 54″ HP95121L or HPP95121 HP95121R or HPP95121 HM309 JRPV30 or JRCPV30 CORBELMIS9 or CORBELSCR9 HS48 HL30 HP95121L or HPP95121 HP95121R or HPP95121 HM369 JRPV36 or JRCPV36 CORBELMIS9 or CORBELSCR9 HS54 HL36 60″ 66″ HP95121L or HP95121L or HPP95121 HPP95121 HP95121R or HP95121R or HPP95121 HPP95121 HM429 HM489 JRPV42 or JRCPV42 JRPV48 or JRCPV48 CORBELMIS9 or CORBELMIS9 or CORBELSCR9 CORBELSCR9 HS60 HS66 HL42 HL48 All blowers are compatible 72″ 78″ HP95121L or HPP95121 HP95121R or HPP95121 HM549 JRPV54 or JRCPV54 CORBELMIS9 or CORBELSCR9 HS72 HL54 HP95121L or HPP95121 HP95121R or HPP95121 HM609 JRPV60 or JRCPV60 CORBELMIS9 or CORBELSCR9 HS78 HL60 Effective March 17. 3″.Valance C . Reference local codes before installation.Mantel B . 21″ DEEP 60″ 66″ HP95421L or HP95421L or HPP95421 HPP95421 HP95421R or HP95421R or HPP95421 HPP95421 HM4212 HM4812 JRPV42 or JRCPV42 JRPV48 or JRCPV48 CORBELMIS9 or CORBELMIS9 or CORBELSCR9 CORBELSCR9 HS60 HS66 HL42 HL48 All blowers are compatible 72″ 78″ HP95421L or HPP95421 HP95421R or HPP95421 HM5412 JRPV54 or JRCPV54 CORBELMIS9 or CORBELSCR9 HS72 HL54 HP95421L or HPP95421 HP95421R or HPP95421 HM6012 JRPV60 or JRCPV60 CORBELMIS9 or CORBELSCR9 HS78 HL60 Effective March 17. 54″ HIGH.D B E E 54” 54” C C 163 291/2” A .Corbels 21” • Recommended clearance of 7″-12″ on each side of gas burner to combustible surface.Piers D .6″ from non-combustible surfaces including the backsplash surface and 30″ from the vent. Hearth Width Pier (left) 54″ High Pier (right) Mantel Valance Corbel (2 Qty) Shelf Hood Liner Blower 48″ 54″ HP95421L or HPP95421 HP95421R or HPP95421 HM3012 JRPV30 or JRCPV30 CORBELMIS9 or CORBELSCR9 HS48 HL30 HP95421L or HPP95421 HP95421R or HPP95421 HM3612 JRPV36 or JRCPV36 CORBELMIS9 or CORBELSCR9 HS54 HL36 HEARTHS A DOOR HINGE DOOR HINGE A 12” DOOR HINGE DOOR HINGE HEARTH.Shelf E . 2014 . Piers D . 57″ HIGH.Corbels 21” • Recommended clearance of 7″-12″ on each side of gas burner to combustible surface.6″ from non-combustible surfaces including the backsplash surface and 30″ from the vent. Hearth Width Pier (left) 57″ High Pier (right) Mantel Valance Corbel (2 Qty) Shelf Hood Liner Blower 48″ 54″ HP95721L or HPP95721 HP95721R or HPP95721 HM3015 JRPV30 or JRCPV30 CORBELMIS9 or CORBELSCR9 HS48 HL30 HP95721L or HPP95721 HP95721R or HPP95721 HM3615 JRPV36 or JRCPV36 CORBELMIS9 or CORBELSCR9 HS54 HL36 60″ 66″ HP95721L or HP95721L or HPP95721 HPP95721 HP95721R or HP95721R or HPP95721 HPP95721 HM4215 HM4815 JRPV42 or JRCPV42 JRPV48 or JRCPV48 CORBELMIS9 or CORBELMIS9 or CORBELSCR9 CORBELSCR9 HS60 HS66 HL42 HL48 All blowers are compatible 72″ 78″ HP95721L or HPP95721 HP95721R or HPP95721 HM5415 JRPV54 or JRCPV54 CORBELMIS9 or CORBELSCR9 HS72 HL54 HP95721L or HPP95721 HP95721R or HPP95721 HM6015 JRPV60 or JRCPV60 CORBELMIS9 or CORBELSCR9 HS78 HL60 Effective March 17.Mantel B . 21″ DEEP D B E E 57” 57” 164 C C 291/2” A . Reference local codes before installation.Shelf E . 2014 .DOOR HINGE DOOR HINGE DOOR HINGE A 15” HEARTHS DOOR HINGE HEARTH.Valance C . 3″. Piers D . Reference local codes before installation.Corbels 21” • Recommended clearance of 7″-12″ on each side of gas burner to combustible surface. 21″ DEEP 48″ 54″ HP93621 HP93621 HM3024 JRPV30 or JRCPV30 CORBELMIS9 or CORBELSCR9 HS48 HL30 HP93621 HP93621 HM3624 JRPV36 or JRCPV36 CORBELMIS9 or CORBELSCR9 HS54 HL36 60″ 66″ HP93621 HP93621 HP93621 HP93621 HM4224 HM4824 JRPV42 or JRCPV42 JRPV48 or JRCPV48 CORBELMIS9 or CORBELMIS9 or CORBELSCR9 CORBELSCR9 HS60 HS66 HL42 HL48 All blowers are compatible 72″ 78″ HP93621 HP93621 HM5424 JRPV54 or JRCPV54 CORBELMIS9 or CORBELSCR9 HS72 HL54 HP93621 HP93621 HM6024 JRPV60 or JRCPV60 CORBELMIS9 or CORBELSCR9 HS78 HL60 Effective March 17. 3″. 60″ HIGH. 36″ High Hearth Width Pier (left) Pier (right) Mantel Valance Corbel (2 Qty) Shelf Hood Liner Blower HEARTHS DOOR HINGE DOOR HINGE A 18” DOOR HINGE DOOR HINGE HEARTH.Shelf E .Mantel B .Mantel B . and into adjacent cabinets. Hearth Width Pier (left) 60″ High Pier (right) Mantel Valance Corbel (2 Qty) Shelf Hood Liner Blower 48″ 54″ HP96021L or HPP96021 HP96021R or HPP96021 HM3018 JRPV30 or JRCPV30 CORBELMIS9 or CORBELSCR9 HS48 HL30 HP96021L or HPP96021 HP96021R or HPP96021 HM3618 JRPV36 or JRCPV36 CORBELMIS9 or CORBELSCR9 HS54 HL36 60″ 66″ HP96021L or HP96021L or HPP96021 HPP96021 HP96021R or HP96021R or HPP96021 HPP96021 HM4218 HM4818 JRPV42 or JRCPV42 JRPV48 or JRCPV48 CORBELMIS9 or CORBELMIS9 or CORBELSCR9 CORBELSCR9 HS60 HS66 HL42 HL48 All blowers are compatible 72″ 78″ HP96021L or HPP96021 HP96021R or HPP96021 HM5418 JRPV54 or JRCPV54 CORBELMIS9 or CORBELSCR9 HS72 HL54 HP96021L or HPP96021 HP96021R or HPP96021 HM6018 JRPV60 or JRCPV60 CORBELMIS9 or CORBELSCR9 HS78 HL60 DOOR HINGE DOOR HINGE A DOOR HINGE DOOR HINGE HEARTH (FLOATING).Valance C .Shelf E .Valance C . 2014 . 21″ DEEP 231/2” 36” 36” D B E 113/4” C E C 21” A . 36″ HIGH.Piers D .Corbels • Cabinets must be fully supported by screws in a structural member in the ceiling or soffit.A D B E E 60” 60” C 165 C 291/2” A .6″ from non-combustible surfaces including the backsplash surface and 30″ from the vent. TOP STD Effective March 17.BTM MD. • Recommended for use with 24″ high Mantel and 9″ high Corbels. 9″ WIDE.TOP • MIP P STD RD • Decorative Door Options ALF CG CG. 36″ HIGH 5.Model HEARTH PIER. 9” HEARTHS Cubic Feet Custom Modifications 201/2” Frame Opening Height 36” AUTHL ADDTK AUTHR 14” 21” CCO STD FB 166 CBO FFDL FFDR STD APC 3/4X ID STD • PE CFP • FPEB Construction Upgrades CFNTO INVFRM CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. • Not available in Hickory door styles.7 HP93621 • Designed for use with a floating hearth application. 2014 .BTM CG. Addison door panels feature a unique raised profile due to the narrow panel width. • Recommended for use with 6″ high Mantel and 9″ high Corbels. 57" 15" 27" Frame Opening Height 27" Frame Opening Height 21" 21" HP95721 L or R 9" • • • • When ordered in Arch/Cathedral door styles. 9" 48" Cubic Feet 51" 27" Frame Opening Height • When ordered in Arch/Cathedral door styles. • Recommended for use with 15″ high Mantel and 9″ high Corbels.5 HP96021 L or R AUTHL ADDTK AUTHR 15" Frame Opening Height 8. Recommended for use with 18″ high Mantel and 9″ high Corbels. door will be Square. Custom Modifications FB FFDL FFDR STD 60" CBO CCO CFNTO • • • FPEB ID STD • Construction Upgrades 15" 9.7 HP95721 L or R 15" HP95421 L or R 8.BTM MD.6 HP95421 L or R HP95121 L or R 9" 167 APC • 3/4X PE INVFRM CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. • Not available in Hickory door styles. 21″ DEEP.TOP STD 27" Frame Opening Height 21" HP96021 L or R Effective March 17. 57″. • Addison door panels feature a unique raised profile due to the narrow panel width. 51″. door will be Square. Not available in Hickory door styles. 2014 . • Addison door panels feature a unique raised profile due to the narrow panel width. 27" Frame Opening Height 21" 21" HP9821 L or R • When ordered in Arch/Cathedral door styles. • Recommended for use with 9″ high Mantel and 9″ high Corbels. • Not available in Hickory door styles. • Addison door panels feature a unique raised profile due to the narrow panel width. door will be Square. 48″. 54″.TOP • MIP P • RD • Decorative Door Options ALF CG CG. 9″ WIDE.Model 7.BTM CG. or 60″ HIGH 9" 191/2" 7. • Addison door panels feature a unique raised profile due to the narrow panel width. • Not available in Hickory door styles.7 HP94821 L or R HEARTH PIER. • Recommended for use with 12″ high Mantel and 9″ high Corbels. 9" 9" Frame Opening Height 54" 12" Frame Opening Height • When ordered in Arch/Cathedral door styles. door will be Square. • Not available in Hickory door styles. door will be Square.8 HP95121 L or R 221/2" HEARTHS • When ordered in Arch/Cathedral door styles. 54″. • Recommended for use with 12″ high Mantel and 9″ high Corbels. Custom Modifications AUTHL ADDTK AUTHR 27” Frame Opening Height FB FFDL FFDR STD 21” 8. • Addison door panels feature a unique raised profile due to the narrow panel width. 51″. do not install against a wall or next to deeper appliances and cabinets. 21” 21” HPP95421 HPP95721 9” 15” Frame Opening Height 60” 15” Interior Width 3 3 /4 ” Pullout Interior Depth 19” 8. 9″ WIDE. 57″. do not install against a wall or next to deeper appliances and cabinets. Not available in Hickory door styles.7 HPP95121 27” Frame Opening Height 27” Frame Opening Height • Includes a natural finish full extension wood pullout with adjustable shelves and chrome rail sides.6 HPP96021 • • • • • • Includes a natural finish full extension wood pullout with adjustable shelves and chrome rail sides. 21” 21” Pullout Interior Depth 19” Pullout Interior Depth 19” HPP94821 HPP95121 9” 9” Frame Opening Height 54” 15” Interior Width 3 3 /4 ” 27” Frame Opening Height • Includes a natural finish full extension wood pullout with adjustable shelves and chrome rail sides. • Not available in Hickory door styles. • Addison door panels feature a unique raised profile due to the narrow panel width. door will be Square. • Recommended for use with 6″ high Mantel and 9″ high Corbels.7 HPP95421 9” CBO CCO CFNTO • • • FPEB ID STD • Construction Upgrades HPP96021 Pullout Interior Depth 19” APC • 3/4X PE INVFRM CFP CFRMO CND EXB EXL EXR TD TVRAV TVRFV TVRVV MD MD. • Recommended for use with 15″ high Mantel and 9″ high Corbels. 2014 . • When ordered in Arch/Cathedral door styles. • Recommended for use with 9″ high Mantel and 9″ high Corbels. • When ordered in Arch/Cathedral door styles.7 HPP94821 HEARTH PIER with PULL-OUT.BTM CG. 21″ DEEP. 48″.Model • Includes a natural finish full extension wood pullout with adjustable shelves and chrome rail sides.BTM MD.TOP STD Effective March 17. For full access from both sides of unit. • For full access from both sides of unit. Addison door panels feature a unique raised profile due to the narrow panel width. Recommended for use with 18″ high Mantel and 9″ high Corbels. • For full access from both sides of unit. or 60″ HIGH 9” 191/2” Cubic Feet 7. • When ordered in Arch/Cathedral door styles. • Not available in Hickory door styles. do not install against a wall or next to deeper appliances and cabinets. • Addison door panels feature a unique raised profile due to the narrow panel width. door will be Square. • Not available in Hickory door styles. door will be Square.7 HPP95721 27” Frame Opening Height Pullout Interior Depth 19” 7. 12” Frame Opening Height 57” 15” Interior Width 3 3 /4 ” • Includes a natural finish full extension wood pullout with adjustable shelves and chrome rail sides. do not install against a wall or next to deeper appliances and cabinets. HEARTHS 9” 168 221/2” Interior Width 33/4” 51” Interior Width 3 3 /4 ” 48” 7. • When ordered in Arch/Cathedral door styles. • Not available in Hickory door styles. When ordered in Arch/Cathedral door styles. do not install against a wall or next to deeper appliances and cabinets. • For full access from both sides of unit.TOP • MIP P RD • Decorative Door Options ALF CG CG. • For full access from both sides of unit. door will be Square. • Addison door panels feature a unique raised profile due to the narrow panel width. door will be Square. 7 HM4815 3.5 HM4812 7.1 HM429 5. 54”. or 60” 12” 4 Door Width 48”. 12″ HIGH Mantel Width 30”. • Not available in Hickory door styles. 66”. • Doors for Hearth Mantel are included. Field installation required for attachment of outer doors to Hearth Piers. or 78” HM3015 2. 60”.7 HM486 2.8 • Recommended for use with 57″ high Hearth Piers and same width Raised or Recessed Panel Arched Valance (see page 164). 3 Door Width 54” HEARTH MANTEL.7 HM426 2. 60”. HEARTH MANTEL. 42”.4 HM6015 3. 72”.5 HM5412 7. 72”. • Not available in Hickory door styles.5 • Recommended for use with 54″ high Hearth Piers and same width Raised or Recessed Panel Arched Valance (see page 163).5 HM4212 7. 42”. 36”. 48”. 2014 .1 HM549 5.1 HM369 5.7 HM366 2. MODIFICATIONS No modifications available for these products. 6″ or 9″ HIGH Model 169 • Recommended for use with 48″ or 51″ high Hearth Piers and same width Raised or Recessed Panel Arched Valance (see page 162). or 78” Mantel Width 36” HM3012 7.7 HM309 5. 15″ HIGH Mantel Width 30”. or 60” 15” 4 Door Width 48”.1 HM489 5.1 HEARTHS HEARTH MANTEL. Effective March 17. 48”. 42”.1 HM5415 3.7 HM546 2. 36”. Field installation required for attachment of outer doors to Hearth Piers. • Not available in Hickory door styles. MODIFICATIONS No modifications available for these products.5 HM3612 7. MODIFICATIONS 12” No modifications available for these products. 66”.7 HM606 2. 54”. 54”. or 60” Grain Cubic Feet HM306 2.0 HM3615 2. • Doors for Hearth Mantel are included.3/4” 6” or 9” Mantel Width 30”.1 HM609 5.3 HM4215 2. 54”. 48”.5 HM6012 7. Actual shelf width is 1/2″ shorter than the dimension in the product code.5 HM5418 7. 711/2”. HEARTH MANTEL. or 78” 170 Cubic Feet HM3018 7. Not available in Hickory. 4715/16”. Shelf finished on one long edge.5 • Recommended for use with 60″ high Hearth Piers and same width Raised or Recessed Panel Arched Valance (see page 165). Field installation required for attachment of outer doors to Hearth Piers. 18″ HIGH HEARTHS Mantel Width 30”.6 • Recommended for use with 36″ high Hearth Piers and same width Raised or Recessed Panel Arched Valance (see page 165). MODIFICATIONS No modifications available for these products. 2014 .7 HL48 5. or 771/2” • • • • • • HS48 2.1 HL42 4. MODIFICATIONS No modifications available for these products.7 HS60 2. 591/2”. 60”. MODIFICATIONS No modifications available for these products. 72”.7 HS78 2.5 HM4218 7. 42”.3 HM6024 2. and bottom. • Not available in Hickory door styles. • Doors for Hearth Mantel are included. 42”. 54”.3 HM3624 1. 48”. • Doors for Hearth Mantel are included. 4 1/2″ DEEP 3 /4 ” 4 1 /2 ” Grain 471/2”. or 78” HM3024 1. 36”. two short edges.6 HM4224 1. 60”. 36”. 72”. 54”. 54”.7 HS54 2. Field installation required for attachment of outer doors to Hearth Piers.Model HEARTH MANTEL. 66”. If ordered with Heirlooming Technique.1 HM5424 2.4 HL54 6. HEARTH SHELF. Shelf width should match the overall hearth width (pier width + Mantel/valance width).5 HM3618 7. 4115/16”.5 HL36 4. 3515/16”.5 HM4818 7. 48”. Recommended for use with Raised or Recessed Panel Arched Valance.7 HS66 2.7 Shelves will install on top of corbels and will slightly overlay the Raised or Recessed Panel Arched Valance. • Not available in Hickory door styles. Compatible with all blowers.0 HL60 6. Mounts to wall and adjoining cabinets.5 HM6018 7. 651/2”.6 Liner is metallic silver. MODIFICATIONS No modifications available for these products. or 5915/16” • • • • HL30 3. HEARTH LINER 203/16” 6” 101/4” 191/2” 2915/16”. 66”.7 HS72 2. top. 5315/16”. or 60” 231/2” 4 Door Width 48”. 54”. or 60” 18” 4 Door Width 48”. 531/2”. 23 1/2″ HIGH Mantel Width 30”.8 HM4824 2. will not feature sand-through characteristics. Effective March 17. Right FB FD FFDL Finished Ends Full Depth Shelf Face Frame and Door on End . and 15″ wide APC RD DRT PE CG • •† † Not available on 9″ wide Effective March 17. Furniture Valance Top Rail.BASE CABINET NOMENCLATURE TOEKICKS All Base Cabinets are 34 1/2″ high and 24″ deep unless otherwise noted. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • •+ ID INVFRM MIP P • • • • • ET EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV • VTK • Not available on 9″ and 12″ wide RT SCPDRW •▲ • • ▲ Not available on 9″ wide Decorative Door Options Construction Upgrades 3/4X DRWTK RECTKALL RECTKL RECTKBK RECTKR + *Not available on 9″.Right Cabinet Box Only Cabinet Case Only Cabinet Front Only Cabinet False Panel Cabinet Frame Only Cabinet with No Door. 2014 . 12″.Left Recessed Toekick . • STD Available Standard on these cabinets Logix Organization Cabinet Cabinet Width 5 Day Express Response Item All Base Cabinets are available in Square Cabinet Styles only.Both Extended Stile .Right Installed Roll Tray Scooped Drawer Tray Dividers Valance Top Rail.1 B12 L or R 7. Description Mod.4 • Adjustable 15″ deep shelves. CONSTRUCTION UPGRADES CUSTOM MODIFICATIONS DECORATIVE DOOR OPTIONS Description Mod. FFDR Model BASE SINGLE DOOR B9 L or R B12 L or R B15 L or R B18 L or R B21 L or R B24 L or R 341/2” 24” 171 Cubic Feet B9 L or R 6. • Addison B9 door panels feature a unique raised profile due to the narrow panel width.Left Face Frame and Door on End . with Drawer Deep Roll Tray Toekick Drawer Extended Stiles . Cabinet Type MODIFICATIONS GRID KEY Base Cabinets are shipped with an unfinished toekick. Arch Valance Top Rail.8 B24 L or R 14.Left Authentic End .Back Recessed Toekick .1 B21 L or R 12.Left Extended Stile .4 B18 L or R 11.8 B15 L or R 9. Description Mod. Description AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND Authentic End . Finished toekicks in matching wood veneer or laminate must be ordered separately and field installed.Right Furniture Finished Plywood Ends Flush Toekick Flush Toekick Arch Flush Toekick Furniture Increased Depth Inverted Frame Matching Interior Plywood P RD RECTKALL RECTKBK RECTKL RECTKR RT SCPDRW TD TVRAV TVRFV TVRVV VTK Peninsula Reduced Depth Recessed Island Toekick Recessed Toekick . Straight Void Toekick APC 3/4X ET PE All Plywood Construction Dovetail Drawer Undermount EasyTrax™ Plywood Ends CG Cut for Glass Doors DRT DRWTK EXB EXL EXR FPEB FTK FTKAV FTKFV ID INVFRM MIP BASE CABINETS Mod. Description Mod. 7 24” 172 B39 B42 B45 B48CS 341/2” 24” BASE CABINETS • Adjustable 15″ deep shelves.Model BASE DOUBLE DOOR B24 B27 B30 B33 B36 341/2” Cubic Feet B24 14.1 B39 22.4 B27 16. and 48″ wide Decorative Door Options Construction Upgrades BASE BUFFET 30”.7 B42 24. 42″. • Reveal between drawers will not align with doors below.8 B48CS 27.4 B45 25. 33”.6 B36 21. or 36” APC 3/4X • • ET PE CG • • B30B 17.2 B36B 20. 341/2” Custom Modifications 24” AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • • ID INVFRM 3/4X • • ET P RD • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • • • Decorative Door Options Construction Upgrades APC MIP DRT PE CG • • Effective March 17. Custom Modifications B48 341/2” 24” AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP P RD • • • • DRT DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV VTK RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW • • • DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB • • • • • • • TD TVRAV TVRFV TVRVV VTK • *Not available on 39″.7 B48 27.7 B33 19. 45″. 2014 .1 B30 17.9 • Adjustable 15″ deep shelf.6 B33B 19. 21”.4 B18CIW L or R 11. 2014 .1 B21WTCD L or R 12.4 • Adjustable 15″ deep shelf. interior height of top tier is 1 5/8″.8 B24CIW L or R 14. and interior height of bottom tier is 1 3/8″.1 B21CIW L or R 12.4 • Adjustable 15″ deep shelf.4 B24WTCD 14. See page 398. • Wood Tiered Cutlery Divider Drawer is also available as an accessory. • Cutlery Insert Wood Organizer is also available as an accessory.4 B18WTCD L or R 11. • Exterior WTCD drawer box height is 3 3/4″. 18”.Model BASE with CUTLERY INSERT WOOD ORGANIZER B15CIW L or R B18CIW L or R B21CIW L or R B24CIW L or R 341/2” 24” Cubic Feet B15CIW L or R 9. 24” Custom Modifications 341/2” B24WTCD 24” APC AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP P • • RD DRT DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV VTK RECTKALL RECTKL RECTKBK RECTKR • • RT • SCPDRW • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X • • ET PE CG • • Effective March 17.8 B24WTCD L or R 14. or 24” B15WTCD L or R B18WTCD L or R B21WTCD L or R B24WTCD L or R 341/2” 24” 3/4X • • ET PE CG • • B15WTCD L or R 9. See page 397. 173 Custom Modifications B24CIW 24” AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP P • • RD DRT DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV VTK RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • • BASE CABINETS 341/2” *Not available on 15″ wide Decorative Door Options Construction Upgrades BASE with WOOD TIERED CUTLERY DIVIDER DRAWER 15”.4 B24CIW 14. 8 B15FH L or R 9.4 B18FH L or R 11.2 B2440FH L or R 16.1 B21FH L or R 12.Model Cubic Feet FULL HEIGHT BASE SINGLE DOOR B9FH L or R 6.1 9”.1 • Two adjustable 15″ deep shelves. or 24” B12FH L or R 7. • Addison B9FH door panels feature a unique raised profile due to the narrow panel width. 18”. 12”.5 B1840FH L or R 12. 12″.7 B1240FH L or R 8.6 B1540FH L or R 10. 174 BASE CABINETS Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • •+ • INVFRM CFP CFRMO MIP P RD • • • ET • B940FH L or R B1240FH L or R B1540FH L or R B1840FH L or R B2140FH L or R B2440FH L or R 401/2” 24” EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV VTK RECTKALL RECTKL RECTKBK RECTKR •▲ RT •▲ + Not available on 9″ and 12″ wide SCPDRW •▲ • • ▲ Not available on 9″ wide CG PE •† • † FULL HEIGHT BASE SINGLE DOOR. and 15″ wide APC CND Not available on 9″ wide B940FH L or R 6. 40 1/2″ HIGH DRWTK Decorative Door Options Construction Upgrades 3/4X DRT • *Not available on 9″. 15”. • Addison B940FH door panels feature a unique raised profile due to the narrow panel width. 12″. 21”. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • •+ • INVFRM CFP • ET DRT MIP P RD • • • DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV VTK RECTKALL RECTKL RECTKBK RECTKR •▲ + RT •▲ Not available on 9″ and 12″ wide SCPDRW • • ▲ Not available on 9″ wide Decorative Door Options Construction Upgrades 3/4X CND • *Not available on 9″.8 B24FH L or R 14. and 15″ wide APC CFRMO CG PE •† • † Not available on 9″ wide Effective March 17. 2014 .4 341/2” B9FH L or R B12FH L or R B15FH L or R B18FH L or R B21FH L or R B24FH L or R 24” • Adjustable 15″ deep shelf.3 B2140FH L or R 14. 42″.FULL HEIGHT BASE DOUBLE DOOR B24FH B27FH B30FH B33FH B36FH 341/2” Model Cubic Feet B24FH 14.6 B3940FH 25.7 B33FH 19. 2014 BASE CABINETS • Adjustable 15″ deep shelf. 40 1/2″ HIGH B2440FH B2740FH B3040FH B3340FH B3640FH 401/2” 24” B3940FH B4240FH B4540FH B4840FHCS 401/2” 24” PE CG • • B2440FH 16. Custom Modifications B4840FH AUTHL AUTHR CBO CCO CFNTO • • • • CFP CFRMO CND DRT • 401/2” 24” FTK FTKAV FTKFV ID • • • INVFRM MIP P RD • • • RECTKALL RECTKL RECTKBK RECTKR • • RT • SCPDRW • *Not available on 39″. 45″.4 B45FH 25.8 B4840FHCS 31.7 B42FH 24.6 B36FH 21.0 B3040FH 19.8 B48FHCS 27.1 B39FH 22. 45″.4 B4240FH 27.4 B27FH 16. 42″. and 48″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG • • Effective March 17.7 24” B39FH B42FH B45FH B48FHCS 341/2” 175 24” Custom Modifications B48FH 341/2" AUTHL AUTHR CBO CCO CFNTO • • • • 24" FTK FTKAV FTKFV ID • • • INVFRM CFP CFRMO CND DRT • MIP P RD • • • DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV VTK RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW • • •* • DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB •* • • • • • • TD TVRAV TVRFV TVRVV VTK *Not available on 39″.7 B48FH 27.1 B4840FH 31.1 B2740FH 18. 48" .1 • Two adjustable 15″ deep shelves.7 B3640FH 23. and 48″ wide Decorative Door Options Construction Upgrades APC 3/4X ET • FULL HEIGHT BASE DOUBLE DOOR.3 B4540FH 25.1 B30FH 17.8 B3340FH 21. 2 WB39 12. 45”. or 48” 341/2” WB39 WB42 WB45 WB48CS 12” WB48 341/2” 12” • One full depth shelf. • Will have the same shelf hole drill pattern as a base cabinet.9 WB48CS 14. and 48″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG • • Effective March 17. 2014 .5 WB33 10. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • • • INVFRM CFP CFRMO CND DRT DRWTK • MIP P RD • • • RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB • • • RT SCPDRW TD •* FD TVRAV TVRFV TVRVV FFDL FFDR FPEB • • VTK • *Not available on 39″. • Will have the same shelf hole drill pattern as a base cabinet. Custom Modifications 176 AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • •* • INVFRM CFP CFRMO CND DRT DRWTK • MIP P RD • • • RECTKALL RECTKL RECTKBK RECTKR • EXB EXL EXR FB • • • RT SCPDRW • TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • BASE CABINETS *Not available on 12″ wide Decorative Door Options Construction Upgrades APC 3/4X ET • WALL BASE DOUBLE DOOR WB24 WB27 WB30 WB33 WB36 341/2” PE CG • • WB24 7.7 WB27 8. 42″.6 WB30 9.8 WB48 14. 45″.0 WB18 L or R 5.1 WB42 13.4 WB36 11.7 • One full depth shelf.1 WB15 L or R 5.8 WB24 L or R 7.Model WALL BASE SINGLE DOOR 341/2” 12” Cubic Feet WB12 L or R 4.9 WB21 L or R 6. 42”.8 12” 39”.0 WB45 13. 2014 . Door features a chrome and wood three-tiered rack.1 Two adjustable 20″ deep shelves. Door rack width is 10 7/8″ on 15″ wide cabinet and 13 7/8″ on 18″ wide cabinet.Model BASE EASY ACCESS STORAGE 15” or 18” BEAS15 L or R BEAS18 L or R 341/2” • • • • Cubic Feet BEAS15 L or R 9. Door rack depth is 3 1/2″. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP CFRMO CND DRT • MIP P RD • DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV 177 VTK • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG • BASE CABINETS 24” Effective March 17.4 BEAS18 L or R 11. • Door rack width is 10 7/8″. • Integrated soft close hinge not included.Model 30″ SUPERCABINET™ Cubic Feet BSC30RP 17. • Each door features a chrome and wood three-tiered rack. Premium door mechanism installed.7 30” 341/2” Opening Opening Width 79/16” Width 177/8” 24” BSC30RP 178 30” 341/2” BASE CABINETS 24” Opening Opening Width 177/8” Width 79/16” BSC30PR 30” • Nomenclature represents left to right order of interior components. Custom Modifications 341/2” Opening Opening Width 79/16” 7 Width 17 /8” 24” BSC30RS AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM APC • 3/4X CFRMO CND ET DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades 30” CFP PE CG • 341/2” 24” Opening Opening Width 177/8” 9 Width 7 /16” BSC30SR 30” 341/2” 24” Opening Width 237/32” BSC30R Effective March 17.7 BSC30SR 17. • Shelves are adjustable and 20″ deep.7 BSC30PR 17. • Roll trays are Full Extension side mounted.7 BSC30RS 17. • Door rack depth is 3 1/2″.7 BSC30R 17. 12″ of adjacent space is required for door to open 170° when installed near a wall or corner. 2014 . Example: BSC30RS = Base SuperCabinet™ 30″ Roll-Out Shelves. For sufficient pull-out clearance. • Cabinets utilize 170° hinge. • L or R designates lid holder side. • Left door features wrap/foil rack.7 30” 341/2” Opening Opening Width 147/8” Width 105/8” BV2SC30PR 30” 341/2” Opening Opening Width 105/8” Width 147/8” 24” BV2SC30RP • Nomenclature represents left to right order of interior components. • Cutting board is 9 3/4″ x 15 3/5″. • Integrated soft close hinge not included. • Shelves are adjustable and 20″ deep. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND ET DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17.Model 30″ SUPERCABINET™ VERSION 2 Cubic Feet BV2SC30PR 17. For sufficient pull-out clearance. Custom Modifications 30” 341/2” Opening Opening Width 105/8” Width 147/8” 24” BV2SC30RS 30” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP 3/4X CND MIP P RD • ET • DRT • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC CFRMO CG PE • 341/2” 24” Opening Opening Width 147/8” 5 Width 10 /8” BV2SC30SR 30″ SUPERCABINET™ GOURMET 30” 341/2” 24” 17. • Side pull-outs feature 3 adjustable chrome and wood baskets on frame with Smart Stop. 12″ of adjacent space is required for door to open 170° when installed near a wall or corner.7 BV2SC30RP 17.7 BSCG30 L or R • Cabinets utilize 170° hinge. • Pots and Pans pull-out includes 8 dividers per tray for adjustable storage. 12″ of adjacent space is required for door to open 170° when installed near a wall or corner. Example: BV2SC30RS = Base Version 2 SuperCabinet™ 30″ Roll-Out Shelves.7 BV2SC30RS 17. Maximum lid diameter is 8 1/2″ on bottom tray and 9 3/4″ on top tray. For sufficient pull-out clearance. • Cabinets utilize 170° hinge. • Door rack depth is 3 1/2″. • Chrome Roll-out trays feature Smart Stop. • Lid pull-out capacity is 6 lids per tray. • Right door features cutting board and cutting board storage.7 BV2SC30SR 17. 2014 179 BASE CABINETS 24” . • Door rack width is 10 7/8″. Premium door mechanism included. • Each door features a chrome and wood three-tiered rack. • Integrated soft close hinge not included. Premium door mechanism installed. For sufficient pull-out clearance. Example: BSC36PRS = Base SuperCabinet™ 36″ Pull-Out Roll-Out Shelves. • Door rack depth is 3 1/2″. • Roll trays are Full Extension side mounted.1 36” 341/2” Opening 11 Opening Width 8 /32” 24” 7 Opening Width 14 /8” Width 811/32” 180 BSC36PRP 36” 341/2” BASE CABINETS 24” Opening 11 Opening Width 8 /32” 7 Opening Width 14 /8” Width 811/32” BSC36PRS 36” 341/2” Opening 11 Opening Width 8 /32” 7 Opening Width 14 /8” 24” • Nomenclature represents left to right order of interior components. • Integrated soft close hinge not included. • Shelves are adjustable and 20″ deep. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND ET DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Width 811/32” BSC36SRP 36” 341/2” 24” Opening 11 Opening Width 8 /32” 7 Opening Width 14 /8” Width 811/32” BSC36SRS Effective March 17.1 BSC36SRP 21. • Door rack width is 13 7/8″. Premium door mechanism installed. 2014 . 12″ of adjacent space is required for door to open 170° when installed near a wall or corner.1 BSC36PRS 21. • Each door features a chrome and wood three-tiered rack.1 BSC36SRS 21.Model 36″ SUPERCABINET™ Cubic Feet BSC36PRP 21. • Cabinets utilize 170° hinge. • Integrated soft close hinge not included. • Left door features wrap/foil rack. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND ET DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17.1 BV2SC36SRS 21.1 BV2SC36PRS 21. Premium door mechanism installed. • Door rack depth is 3 1/2″. • Each door features a chrome and wood three-tiered rack. • Shelves are adjustable and 20″ deep. For sufficient pull-out clearance. 12″ of adjacent space is required for door to open 170° when installed near a wall or corner. • Cabinets utilize 170° hinge. For sufficient pull-out clearance. • Pots and Pans pull-out includes 8 dividers per tray for adjustable storage. • Chrome Roll-out trays feature Smart Stop. Premium door mechanism included.1 BV2SC36SRP 21. • Right door features cutting board and cutting board storage. • Door rack width is 13 7/8″. • Cutting board is 9 3/4″ x 15 3/5″. • L or R designates lid holder side. • Integrated soft close hinge not included.1 BSCG36 L or R • Cabinets utilize 170° hinge. • Lid pull-out capacity is 6 lids per tray. 12″ of adjacent space is required for door to open 170° when installed near a wall or corner. • Side pull-outs feature 3 adjustable chrome and wood baskets on frame with Smart Stop. Maximum lid diameter is 8 1/2″ on bottom tray and 9 3/4″ on top tray. 2014 181 BASE CABINETS 24” . Custom Modifications BV2SC36PRS 36” AUTHL AUTHR CBO CCO CFNTO • • • • 341/2” Opening 3 Opening Width 8 /8” 24” 7 Opening Width 14 /8” Width 83/8” BV2SC36SRP FTK FTKAV FTKFV • • ID INVFRM CFP 3/4X CND MIP P RD • ET • DRT • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC CFRMO CG PE • 36” 341/2” Opening 3 Opening Width 8 /8” 7 Opening Width 14 /8” 24” Width 83/8” BV2SC36SRS 36″ SUPERCABINET™ GOURMET 36” 341/2” 24” 21. Example: BV2SC36PRS = Base Version 2 SuperCabinet™ 36″ Pull-Out Roll-Out Shelves.Model 36″ SUPERCABINET™ VERSION 2 Cubic Feet BV2SC36PRP 21.1 36” 341/2” Opening 3 Opening Width 8 /8” 7 Opening Width 14 /8” Width 83/8” BV2SC36PRP 36” 341/2” Opening 3 Opening Width 8 /8” 7 Opening Width 14 /8” 24” Width 83/8” • Nomenclature represents left to right order of interior components. Model BASE with ROLL TRAYS 341/2” 24” 182 Cubic Feet B12RT L or R 7. • Cabinets may accommodate up to 4 roll trays. which may be purchased separately for field installation. B12RT L or R B15RT L or R B18RT L or R B21RT L or R B24RT L or R Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB • • • • • • • • •* • • • FTK FTKAV FTKFV • •+ ID INVFRM 341/2” 24” B24RT B27RT B30RT B33RT B36RT RD RECTKALL RECTKL RECTKBK RECTKR • • RT • SCPDRW TD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • + Not available on 12″ wide Decorative Door Options Construction Upgrades BASE DOUBLE DOOR with ROLL TRAYS P • *Not available on 12″ and 15″ wide BASE CABINETS MIP FD APC 3/4X ET PE CG • • • • • B24RT 14.7 B33RT 19. 2014 .1 B30RT 17. which may be purchased separately for field installation. no center stile.1 B21RT L or R 12. • Cabinet has butt doors. See page 399.4 B18RT L or R 11.1 • 2 roll trays standard. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB • • • • • • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP P RD • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC 3/4X ET PE CG • • • • • Effective March 17.4 B27RT 16.6 B36RT 21.7 B15RT L or R 9.4 • 2 roll trays standard. See page 399.8 B24RT L or R 14. • Cabinet may accommodate up to 4 roll trays. 2014 . Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB • • • • • • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP P RD • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC 3/4X ET PE CG • • • • • Effective March 17. See page 399.2 B45RT 25. Cabinet may accommodate up to 4 roll trays. no center stile. See page 399. 33”. or 48” 24” 341/2” B39RT B42RT B45RT B48CSRT Model Cubic Feet B39RT 22. or 36” 341/2” 24” • • • • RD • • RECTKALL RECTKL RECTKBK RECTKR • RT • SCPDRW TD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades BASE BUFFET with ROLL TRAYS P FD BASE CABINETS 48” APC 3/4X ET PE CG • • • • • B30RTB 17.5 B48RT 27. 183 Custom Modifications B48RT 341/2” 24” AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB • • • • • • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP 30”.1 Reveal between drawers will not align with doors below. 42”. 45”. which may be purchased separately for field installation. 2 roll trays standard.BASE DOUBLE DOOR with ROLL TRAYS 39”. • Cabinet may accommodate up to 8 roll trays.7 B33RTB 19. which may be purchased separately for field installation. Cabinet has butt doors.6 B36RTB 21.5 • 4 roll trays standard.5 B42RT 24.8 B48CSRT 27. • Cabinets may accommodate up to 5 roll trays. 2014 . which may be purchased separately for field installation.0 • 2 roll trays standard. See page 399.4 B18FHRT L or R 11.1 B2440FHRT 16.1 B21FHRT L or R 12.2 B2440FHRT L or R 16.1 B2740FHRT 18.8 B24FHRT L or R 14. which may be purchased separately for field installation. 40 1/2″ HIGH B1540FHRT L or R B1840FHRT L or R B2140FHRT L or R B2440FHRT L or R 401/2” 24” ET PE CG • • • B1540FHRT L or R 10. See page 399. Custom Modifications 184 AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP CFRMO CND • MIP P RD • • DRT DRWTK EXB EXL EXR FB • •* • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • BASE CABINETS *Not available on 12″ and 15″ wide Decorative Door Options Construction Upgrades APC 3/4X • BASE FULL HEIGHT with ROLL TRAYS. Custom Modifications B2440FHRT B2740FHRT 401/2” 24” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP CFRMO CND • MIP P RD • • DRT DRWTK EXB EXL EXR FB • •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG • • • Effective March 17.5 B1840FHRT L or R 12.7 B15FHRT L or R 9.4 • 2 roll trays standard. • Cabinets may accommodate up to 5 roll trays.Model BASE FULL HEIGHT with ROLL TRAYS 341/2” 24” Cubic Feet B12FHRT L or R 7.3 B2140FHRT L or R 14. no center stile. 2014 . See page 399. • Cabinet may accommodate up to 10 roll trays. Custom Modifications 185 AUTHL AUTHR CBO CCO CFNTO • • • • FTKAV FTKFV • • ID INVFRM 3/4X • BASE FULL HEIGHT DOUBLE DOOR with ROLL TRAYS 39”.5 B48FHRT 27.5 BASE CABINETS FTK CFP EXL EXR • 4 roll trays standard.1 • 2 roll trays standard. 45”.5 B42FHRT 24. See page 399. which may be purchased separately.2 B45FHRT 25.7 B33FHRT 19. • Cabinet may accommodate up to 5 roll trays. 42”.8 B48FHCSRT 27.Model BASE FULL HEIGHT with ROLL TRAYS B24FHRT B27FHRT B30FHRT B33FHRT B36FHRT 341/2” 24” Cubic Feet B24FHRT 14. or 48” 341/2” 24” B39FHRT B42FHRT B45FHRT B48FHCSRT CND • MIP P RD • • DRT DRWTK EXB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW FB • TD FD FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC CFRMO FFDL FFDR ET PE CG • • • B39FHRT 22.4 B27FHRT 16. 48” Custom Modifications B48FHRT 341/2” 24” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND • MIP P DRT DRWTK • RD • • RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB • • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP ET PE CG • • • Effective March 17. • Cabinet has full height butt doors.6 B36FHRT 21. which may be purchased separately.1 B30FHRT 17. See page 399. Exterior WTCD drawer box height is 3 3/4″. See page 399. 186 Custom Modifications B24RTCIW 341/2” AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB • • • • • • • • •* • • • BASE CABINETS 24” FTK FTKAV FTKFV • • ID INVFRM MIP P RD • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • *Not available on 15″ wide Decorative Door Options Construction Upgrades BASE with WOOD TIERED CUTLERY DIVIDER DRAWER and ROLL TRAYS 15”. and interior height of bottom tier is 1 3/8″. Cabinets may accommodate up to 4 roll trays.8 B24RTWTCD L or R 14.4 B24RTCIW 14. See page 398. interior height of top tier is 1 5/8″. which may be purchased separately for field installation. or 21” B15RTWTCD L or R B18RTWTCD L or R B21RTWTCD L or R B24RTWTCD L or R 341/2” 24” • • • • B24RTWTCD 24” 3/4X ET PE CG • • • • • B15RTWTCD L or R 9. Wood Tiered Cutlery Divider Drawer is also available as an accessory. 2014 . • Cutlery Insert Wood Organizer is also available as an accessory.4 • 2 roll trays standard.4 2 roll trays standard. 18”.1 B21RTWTCD L or R 12. Custom Modifications 24” 341/2” APC AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB • • • • • • • • •* • • • FTK FTKAV FTKFV • • ID INVFRM MIP P RD • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG • • • Effective March 17.Model BASE with CUTLERY INSERT WOOD ORGANIZER and ROLL TRAYS B15RTCIW L or R B18RTCIW L or R B21RTCIW L or R B24RTCIW L or R 341/2” 24” Cubic Feet B15RTCIW L or R 9. which may be purchased separately for field installation.1 B21RTCIW L or R 12.8 B24RTCIW L or R 14.4 B24RTWTCD 14. See page 397. • Cabinets may accommodate up to 4 roll trays.4 B18RTCIW L or R 11.4 B18RTWTCD L or R 11. 6 B36FHRTLO 21.7 B33FHRTLO 19. Screws should be removed during installation to make the lid organizer mobile. Pots and Pans Lid Organizer is also available as an accessory for field installation. which may be purchased separately for field installation. Cabinet has full height butt doors. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP ET PE CG • • • Effective March 17. 2014 .1 2 roll trays standard. no center stile. Screws should be removed during installation to make the lid organizer mobile. which may be purchased separately for field installation. no center stile. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTKAV FTKFV • • ID INVFRM MIP 3/4X • BASE with LID ORGANIZER and ROLL TRAYS 341/2” 24” • • • • • RD • EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT • SCPDRW TD FD FFDL FFDR 187 FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC P DRWTK ET PE CG • • • B30FHRTLO 17. See page 399.Model BASE with DRAWER and LID ORGANIZER and ROLL TRAYS 341/2” 24” • • • • • Cubic Feet B30RTLO 17. Cabinet may accommodate up to 5 roll trays. See page 399. Cabinet may accommodate up to 4 roll trays. See page 407.6 B36RTLO 21. Cabinet has butt doors. Pots and Pans Lid Organizer is also available as an accessory for field installation. The lid organizer is attached to the roll tray with 2 screws for shipping purposes only. The lid organizer is attached to the roll tray with 2 screws for shipping purposes only.1 BASE CABINETS FTK DRT 2 roll trays standard. See page 407.7 B33RTLO 19. • For full access from both sides of unit. no center stile. • For full access from both sides of unit.4 BPPP24 14.4 24” BPPP24 L or R 341/2” 11” 91/2” 24” Custom Modifications 21” 2” • Full Extension slide out shelves pull out independently. • Pots and Pans Pull-Out is also available as an accessory for field installation. See page 407. 30”. See page 401. do not install against a wall or next to deeper appliances and cabinets. • Cabinet has bottom roll tray with double lid storage shelves above.7 BPPP30 • Full Extension slide out shelves pull out independently.7 B36PS 21. See page 407. or 36” B24PS B30PS B36PS 1 34 /2” 24” BASE CABINETS B24PS L or R • Cabinet has butt doors. 24” 188 Cubic Feet AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP 3/4X ET • BASE POTS & PANS PULL-OUT RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT • SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC P DRT PE CG • • BPPP24 L or R 14. 30” Custom Modifications 341/2” 179/16” 1113/16” 24” 21” 313/16” Shelf Depth (front to back) AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • DRT DRWTK EXB EXL EXR FB • • • • 177/8” FTK FTKAV FTKFV • • ID INVFRM 3/4X • • P RD • ET RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • TD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC MIP FD PE CG • • Effective March 17. 2014 .Model POTS & PANS ORGANIZER BASE with DRAWER 24” B24PS L or R 341/2” 14. • Base Pan Storage unit is also available as an accessory for field installation.4 B30PS 17.4 B24PS 14. 113/4” Shelf Depth (front to back) AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • DRT DRWTK EXB EXL EXR FB • • • • 24” BPPP24 341/2” 11” FTKAV FTKFV • • ID INVFRM MIP 21” 2” APC 3/4X • • P RD • ET RECTKALL RECTKL RECTKBK RECTKR • RT • SCPDRW TD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades 9 1 /2 ” 24” FTK FD PE CG • • 113/4” Shelf Depth (front to back) BASE POTS & PANS PULL-OUT 17. do not install against a wall or next to deeper appliances and cabinets. • Pots and Pans Pull-Out is also available as an accessory for field installation.1 Custom Modifications 24”. 15″ .Model BASE with ROLL-OUT TRAY DIVIDER 12” B12TDRO L or R 7. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • •* ID INVFRM • • RD ET DRWTK RECTKALL RECTKL RECTKBK RECTKR •+ • EXB EXL EXR FB • • • RT SCPDRW • TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • + Not available on 9″ wide Decorative Door Options Construction Upgrades 3/4X P • *Not available on 9″ and 12″ wide APC MIP DRT CG PE •† • † Not available on 9″ wide Effective March 17.8 B15TDRO L or R 9.1 TD12 L or R 7.4 compartments. See page 409. • Addison TD9 door panels feature a unique raised profile due to the narrow panel width. Roll-Out Tray Divider is also available as an accessory for field installation. See page 409. 2014 .3 compartments. Custom Modifications B15TDRO L or R AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • •* ID INVFRM MIP P RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB • • • RT • SCPDRW TD FD FFDL FFDR FPEB 189 • TVRAV TVRFV TVRVV • VTK • *Not available on 12″ wide BASE with TRAY DIVIDER 9” 341/2” 24” 3/4X • • ET PE CG • • TD9 L or R 6.8 TD15 L or R 9.4 15” 341/2” • • • • • 341/2” 24” 24” 73/4” B12TDRO L or R Cubic Feet 103/4” Dividers are removable. Tray divider utilizes Smart Stop undermount guides and bumpers for door protection.4 12” or 15” 341/2” TD9 L or R APC BASE CABINETS Decorative Door Options Construction Upgrades 24” TD12 L or R TD15 L or R • Tray Divider is chrome. 12″ . • Tray Divider is also available as an accessory for field installation. • When in closed position. clearance above shelf is 18 7/8″. 21″ wide: 16″ wide x 18″ deep. • Basket available space is 8 3/4″ wide x 4 1/2″ high x 12″ deep. • Mixer shelf dimensions: 18″ wide: 13″ wide x 18″ deep.4 B24FHMIX 14. Custom Modifications 24” TD12FH L or R TD15FH L or R AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • •* ID INVFRM 3/4X MIP 24” P RD DRWTK RECTKALL RECTKL RECTKBK RECTKR •+ EXB EXL EXR FB • • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • + Not available on 9″ wide CG PE •† • † 18”. • Maximum Weight Capacity for Mixer Shelf: 30 lbs.4 341/2” 341/2” 24” B18FHMIX L or R B21FHMIX L or R B24FHMIX L or R 24” B24FHMIX • Includes mixer lift and accessory basket.4 • Tray Divider is chrome. • Addison TD9FH door panels feature a unique profile due to narrow panel width. • Tray Divider is also available as an accessory for field installation. 2014 . Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND ET DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • • Effective March 17. Release brackets lower the mixer shelf back into the cabinet. See page 409.1 TD12FH L or R 7. 21”.1 B21FHMIX L or R 12.Model BASE FULL HEIGHT with TRAY DIVIDER 9” 341/2” 12” or 15” 341/2” 24” TD9FH L or R 190 Cubic Feet TD9FH L or R 6. 24″ wide: 19″ wide x 18″ deep.8 TD15FH L or R 9. Overall mixer shelf and basket is 24″ high.8 B24FHMIX L or R 14. clearance below basket is 2″. • Mixer shelf locks in the fully open position. or 24” DRT Decorative Door Options ET • BASE CABINET with MIXER SHELF CND • Construction Upgrades APC CFRMO • *Not available on 9″ and 12″ wide BASE CABINETS CFP Not available on 9″ wide B18FHMIX L or R 11. • CabMat is removable for cleaning.7 FP 341/2” SB21 L or R SB24 L or R 24” FP SB24 SB27 SB30 SB33 SB36 341/2” 191 39”.7 SB33CM 19. or 48” SB39 SB42 SB45 SB48CS FP FP 341/2” 24” FP • Mini Touch-Up Kit (MTUK) included. MTUK includes small touch-up marker and small fill stick.6 SB36 21. 45″.3 33″ 24″ SB36CM 5.8 SB24 L or R 14.7 SB42 24.Model SINK BASE = False Panel Cubic Feet SB21 L or R 12.6 SB36CM 21.1 SB30 17.1 • Mini Touch-Up Kit (MTUK) included. 42”.1 SB39 22.4 SB45 25. 2014 BASE CABINETS 24” .7 SB48 27.7 36″ 24″ Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • STD • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X ET P • • RD DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD TVRAV TVRFV TVRVV FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC MIP DRT PE CG • Effective March 17.6 4. MTUK includes small touch-up marker and small fill stick.9 30″ 24″ SB33CM 4. 45”. • CabMat features a grey sloped mat to capture spills. and 48″ wide Decorative Door Options Construction Upgrades APC 3/4X ET • SINK BASE with CABMAT™ NEW 341/2” FP PE CG • • SB30CM 17. 42″.7 SB33 19.2 3.4 SB24 14. 24” Liquid Capacity Cabinet Size Model Quarts Liters Width Depth SB30CM 4. SB48 Custom Modifications FP 341/2” AUTHL AUTHR CBO • 24” CCO CFNTO CFP CFRMO CND • • STD • • FTK FTKAV FTKFV ID • • • INVFRM MIP P RD • • • DRT DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • *Not available on 39″.4 SB27 16.0 4.8 SB48CS 27. or 48” SB393427 SB423427 SB453427 SB483427CS FP FP 341/2” • • P RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • Decorative Door Options ET • SINK BASE.Model 20. MTUK includes small touch-up marker and small fill stick. 27” Custom Modifications FP FP 341/2” 27” SB483427 AUTHL AUTHR CBO • FTK FTKAV FTKFV • • CCO CFNTO CFP CFRMO CND • • STD • • ID INVFRM • 3/4X ET P • • RD DRWTK RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB • • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC MIP DRT PE CG • • Effective March 17.5 SB453427 25.8 SB483427CS 31. MTUK includes small touch-up marker and small fill stick. Caddy dimensions are: 9 15/16″ wide x 18 5/16″ tall x 18 5/8″ deep.9 SB333427 22. • Includes two 1/4″ x 30″ space fillers. 27″ DEEP. Caddy is removable and portable.1 SB363427 23. 42”. 45”.5 SB423427 27.2 • Mini Touch-Up Kit (MTUK) included. Custom Modifications 24” 192 AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • • • INVFRM CFP MIP 3/4X BASE CABINETS = False Panel FP 341/2” SB243427 L or R 27” FP SB243427 SB273427 SB303427 SB333427 SB363427 341/2” 27” 39”. SINGLE or DOUBLE DOOR CND • Construction Upgrades APC CFRMO PE CG • • SB243427 L or R 16. L or R designates caddy location.2 SB243427 16.1 SB303427 19. 2014 .7 SB393427 25.9 SB36CDY L or R SINK BASE with CADDY • • • • 36” FP 341/2” Cubic Feet Mini Touch-Up Kit (MTUK) included.2 SB273427 18.2 SB483427 31. shipped unattached. Except with FPEB. 0 4. moisture resistant plastic to allow storage of sponges and other cleaning materials. 193 Custom Modifications SB39ST SB42ST AUTHL AUTHR 24” CBO • CCO CFNTO • • FTK FTKAV FTKFV ID • • • INVFRM CFP CFRMO CND • • MIP P RD • • • DRT DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK BASE CABINETS 341/2” Model • *Not available on 39″ and 42″ wide Decorative Door Options Construction Upgrades APC 3/4X ET • SINK BASE with TILT DOWNS and CABMAT™ 341/2” 24” NEW • • • • • • PE CG • • SB30STCM 17. Tilt-out trays are stain resistant.7 SB42ST 24. Tilt-out trays are also available as an accessory for field installation.6 SB36STCM 21.2 3. MTUK includes small touch-up marker and small fill stick.7 36″ 24″ Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X ET CFRMO CND • • MIP P • • RD DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD TVRAV TVRFV TVRVV FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17. moisture resistant plastic to allow storage of sponges and other cleaning materials. CabMat is removable for cleaning.7 SB33ST 19.6 4.4 Tilt-out trays are stain resistant.9 30″ 24″ SB33STCM 4.1 SB39ST 22. 2014 .1 Mini Touch-Up Kit (MTUK) included. Includes two tilt-out trays. See page 408. CabMat features a grey sloped mat to capture spills. Mini Touch-Up Kit (MTUK) included.SINK BASE with TILT DOWNS SB30ST SB33ST SB36ST 24” • • • • 341/2” Cubic Feet SB30ST 17. Liquid Capacity Model Cabinet Size Quarts Liters Width Depth SB30STCM 4. Tilt-out trays are also available as on accessory for field installation.3 33″ 24″ SB36STCM 5.7 SB33STCM 19. Includes two tilt-out trays.6 SB36ST 21. MTUK includes small touch-up marker and small fill stick. See page 408. moisture resistant plastic to allow storage of sponges and other cleaning materials. 27″ DEEP SB303427ST SB333427ST SB363427ST 341/2” 27” SB393427ST SB423427ST • • • • • CND • • P RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC CFRMO PE CG • • SB303427ST 19. Tilt-out trays are also available as an accessory for field installation. See page 408. Includes two tilt-out trays.7 SB393427ST 25.9 SB36STCDY L or R • • • • • • • Mini Touch-Up Kit (MTUK) included. moisture resistant plastic to allow storage of sponges and other cleaning materials. MTUK includes small touch-up marker and small fill stick. Custom Modifications 24” 194 AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • • • INVFRM CFP MIP 3/4X ET BASE CABINETS • SINK BASE with TILT DOWNS. MTUK includes small touch-up marker and small fill stick. Caddy dimensions are: 9 15/16″ wide x 18 5/16″ tall x 18 5/8″ deep.5 Tilt-out trays are stain resistant. L or R designates caddy location. Mini Touch-up Kit (MTUK) included.5 SB423427ST 27. 2014 .1 SB363427ST 23. Caddy is removable and portable. Includes two tilt-out trays. Except with FPEB. Tilt-out trays are also available as on accessory for field installation.9 SB333427ST 22. Custom Modifications 341/2” AUTHL AUTHR 27” CBO • FTK FTKAV FTKFV • • CCO CFNTO • • ID INVFRM • 3/4X ET CFRMO CND • • MIP P • • RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB • • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • • Effective March 17. See page 408.Model SINK BASE with TILT DOWNS and CADDY 36” 341/2” Cubic Feet 20. Tilt-out trays are stain resistant. Includes two 1/4″ x 30″ space fillers. shipped unattached. 33”. per square foot.1 Mini Touch-Up Kit (MTUK) included. 2014 . Door rack depth is 3 1/2″.) • Mini Touch-Up Kit (MTUK) included.7 36″ 24″ Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • STD • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X ET P • • RD DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD TVRAV TVRFV TVRVV FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC MIP DRT PE CG • Effective March 17. MTUK includes small touch-up marker and small fill stick. CabMat features a grey sloped mat to capture spills. • Each door features a chrome and wood two-tiered rack.9 30″ Depth 24″ SB33SCM 4. per square foot. • All load bearing surfaces meet KCMA standards of 15 lbs. • Door rack depth is 3 1/2″.0 4.6 SB36S 21.SINK BASE SUPERCABINET™ 30”. Liquid Capacity Model Cabinet Size Quarts Liters Width SB30SCM 4.3 33″ 24″ SB36SCM 5. 12 3/8″ on 33″ wide cabinet. Door rack width is 10 7/8″ on 30″ wide cabinet.7 SB33SCM 19.6 4. MTUK includes small touch-up marker and small fill stick. or 36” FP Model Cubic Feet SB30S 17.2 3. and 13 7/8″ on 36″ wide cabinet.7 SB33S 19. CabMat is removable for cleaning. (Shelf shipped secure.1 • Quarter Round Reversible Shelf for left or right applications will be constructed from 3/4″ thick laminated furniture board. • Door rack width is 10 7/8″ on 30″ wide cabinet. 12 3/8″ on 33″ wide cabinet. All load bearing surfaces meet KCMA standards of 15 lbs.6 SB36SCM 21. 341/2” 24” = False Panel 195 Custom Modifications CBO CCO CFNTO CFP CFRMO CND • • • • STD • • FTK FTKAV FTKFV ID • • • INVFRM MIP 3/4X FP 341/2” 24” NEW • • • • • • • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • Decorative Door Options ET CG PE • SINK BASE SUPERCABINET™ with CABMAT™ RD • Construction Upgrades APC P DRT BASE CABINETS AUTHL AUTHR • SB30SCM 17. can be positioned in left or right corner. and 13 7/8″ on 36″ wide cabinet. Each door features a chrome and wood two-tiered rack. 1 • Quarter Round Reversible Shelf for left or right applications will be constructed from 3/4″ thick laminated furniture board.Model SINK BASE SUPERCABINET™ with CADDY FP 341/2” 24” 196 Cubic Feet 20. • Tilt-out trays are also available as an accessory for field installation. 12 3/8″ on 33″ wide cabinet. • Each door features a chrome and wood two-tiered rack. • All load bearing surfaces meet KCMA standards of 15 lbs. Door rack width is 13 7/8″. moisture resistant plastic to allow storage of sponges and other cleaning materials. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • STD • • FTK FTKAV FTKFV ID • • • INVFRM MIP 3/4X ET BASE CABINETS • SINK BASE SUPERCABINET™ with TILT DOWNS 30”. MTUK includes small touch-up marker and small fill stick. • Door rack depth is 3 1/2″.6 SB36STS 21. per square foot. or 36” 341/2” 24” RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC P DRT PE CG • • SB30STS 17. Caddy is removable and portable. Caddy dimensions are: 9 15/16″ wide x 18 5/16″ tall x 18 5/8″ deep. L or R designates caddy location. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • • • INVFRM • 3/4X ET MIP CFRMO CND • • P RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD TVRAV TVRFV TVRVV FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17.9 SB36SCDY L or R • • • • • • • Mini Touch-Up Kit (MTUK) included. (Shelf shipped secure. • Includes two tilt-out trays. can be positioned in left or right corner. 2014 . Door opposite caddy features a chrome and wood two-tiered rack. See page 408. • Tilt-out trays are stain resistant. Door rack depth is 3 1/2″. 33”. MTUK includes small touch-up marker and small fill stick. • Door rack width is 10 7/8″ on 30″ wide cabinet.) • Mini Touch-Up Kit (MTUK) included.7 SB33STS 19. and 13 7/8″ on 36″ wide cabinet. 3 33″ 24″ SB36STSCM 5. Liquid Capacity Model 197 Cabinet Size Quarts Liters Width Depth SB30STSCM 4. Tilt-out trays are also available as an accessory for field installation.7 SB33STSCM 19. All load bearing surfaces meet KCMA standards of 15 lbs. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • • • INVFRM • 3/4X ET MIP CFRMO CND • • P RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD TVRAV TVRFV TVRVV FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • • Effective March 17. 2014 BASE CABINETS Model . CabMat features a grey sloped mat to capture spills. Caddy is removable and portable. Door rack depth is 3 1/2″. Door rack width is 13 7/8″. See page 408.9 SB36STSCDY L or R • • • • • • • • • • CND MIP Construction Upgrades APC CFRMO Mini Touch-Up Kit (MTUK) included. Tilt-out trays are stain resistant. Includes two tilt-out trays. See page 408. Door opposite caddy features a chrome and wood two-tiered rack. per square foot. 12 3/8″ on 33″ wide cabinet.6 SB36STSCM 21. moisture resistant plastic to allow storage of sponges and other cleaning materials. Each door features a chrome and wood two-tiered rack.SINK BASE SUPERCABINET™ with TILT DOWNS and CABMAT™ 341/2” 24” NEW • • • • • • • • • • Cubic Feet SB30STSCM 17. CabMat is removable for cleaning.9 30″ 24″ SB33STSCM 4.6 4.7 36″ 24″ Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP 3/4X ET • SINK BASE SUPERCABINET™ with TILT DOWNS and CADDY 341/2” 24” • • P • • RD DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • Decorative Door Options CG PE • 20. L or R designates caddy location.0 4. MTUK includes small touch-up marker and small fill stick. MTUK includes small touch-up marker and small fill stick.2 3. Caddy dimensions are: 9 15/16″ wide x 18 5/16″ tall x 18 5/8″ deep. and 13 7/8″ on 36″ wide cabinet.1 Mini Touch-Up Kit (MTUK) included. Door rack depth is 3 1/2″. Tilt-out trays are stain resistant. Includes two tilt-out trays. moisture resistant plastic to allow storage of sponges and other cleaning materials. Door rack width is 10 7/8″ on 30″ wide cabinet. Tilt-out trays are also available as an accessory for field installation. creating a 3″ wide clipped corner.8 SB483427FCC 30. • Face frame and cabinet bottom transition from 27″ deep to 24″ deep (standard base depth) with 4 1/2″ fillers at a 45 degree angle. 30”. When RD is specified for 9″-11″ deep. 2014 . or 33” Frame Opening Width 387/16” or 417/16” 45” or 48” FP SB453427FCC SB483427FCC FP 341/2” 24” End Panel 27” DRWTK EXB EXL EXR FB FD FFDL FFDR • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC • DRT • Mini Touch-Up Kit (MTUK) included. cabinet will not include a toekick. Custom Modifications 27” BASE CABINETS Cubic Feet 161/2” or 18” Frame Opening Width AUTHL AUTHR CBO • FTK FTKAV FTKFV CCO CFNTO CFP CFRMO CND • • STD • • ID INVFRM MIP P RD • 3/4X ET • PE CG • • SINK BASE with CLIPPED CORNERS.8 SB393427FCC 24.6 SB423427CC 26. 33”. When RD is specified for 9″-11″ deep. 24”.1 • Mini Touch-Up Kit (MTUK) included. 24”.4 SB453427FCC 25. 267/16”. or 33” Frame Opening Width 27” 198 387/16” or 417/16” 45” or 48” FP SB453427CC SB483427CC FP 341/2” 24” End Panel SB303427CC 19.8 SB483427CC 30. 33”. 27″ DEEP SB303427FCC 19. • RD available to a minimum of 9″ deep. 36”. creating a 3″ wide clipped corner. or 357/16” SB363427FCC 22. cabinet will not include a toekick. MTUK includes small touch-up marker and small fill stick.4 SB453427CC 25. PLAIN.2 SB333427CC 21. 327/16”.0 30”.Model SINK BASE with CLIPPED CORNERS.2 SB333427FCC 21. 30”.1 SB303427FCC SB333427FCC SB363427FCC SB393427FCC SB423427FCC FP 341/2” 24” End Panel 27” 21”.0 SB363427CC 22. 327/16”. or 357/16” SB303427CC SB333427CC SB363427CC SB393427CC SB423427CC FP 341/2” 24” End Panel 21”. Custom Modifications 161/2” or 18” Frame Opening Width AUTHL AUTHR CBO • FTK FTKAV FTKFV CCO CFNTO CFP CFRMO CND • • STD • • ID INVFRM MIP P RD • • 3/4X ET DRWTK EXB EXL EXR FB FD FFDL FFDR • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC • DRT PE CG • • Effective March 17.8 SB393427CC 24. 297/16”. 39”. 27″ DEEP 30”. 36”. 297/16”. 27”.6 SB423427FCC 26. 27”. • Toekick remains flush at standard cabinet depth. or 42” 237/16”. FLUTED. • RD available to a minimum of 9″ deep. MTUK includes small touch-up marker and small fill stick. 267/16”. • Face frame and cabinet bottom transition from 27″ deep to 24″ deep (standard base depth) with 4 1/2″ fillers at a 45 degree angle. • Toekick remains flush at standard cabinet depth. or 42” 237/16”. 39”. PLAIN.4 SB483427CCST 30. 267/16”. moisture resistant plastic to allow storage of sponges and other cleaning materials. 30”. When RD is specified for 9″-11″ deep. 30”. MTUK includes small touch-up marker and small fill stick. 297/16”.4 SB453427FCCST 25.8 SB393427FCCST 24. 33”. Includes two tilt-out trays. or 42” SB303427FCCST SB333427FCCST SB363427FCCST SB393427FCCST SB423427FCCST 341/2” 24” End Panel 27” 237/16”. Tilt-out trays are also available as an accessory for field installation.4 SB453427CCST 26. 39”. See page 408. • Toekick remains flush at standard cabinet depth. 27”. 39”. Includes two tilt-out trays. • Toekick remains flush at standard cabinet depth. 27″ DEEP 30”. cabinet will not include a toekick. 297/16”.0 SB363427CCST 22. Tilt-out trays are also available as an accessory for field installation. 27”. 327/16”. cabinet will not include a toekick. Tilt-out trays are stain resistant. moisture resistant plastic to allow storage of sponges and other cleaning materials. creating a 3″ wide clipped corner. creating a 3″ wide clipped corner. • RD available to a minimum of 9″ deep. 27″ DEEP 30”. 24”. When RD is specified for 9″-11″ deep. Custom Modifications AUTHL AUTHR CBO • FTK FTKAV FTKFV CCO CFNTO • • ID INVFRM CFP MIP CFRMO CND • • P RD • 3/4X ET • SINK BASE with CLIPPED CORNERS and TILT DOWNS. 2014 199 BASE CABINETS Model .6 SB423427CCST 26. or 357/16” 21”. Tilt-out trays are stain resistant. 36”. or 33” Frame Opening Width 387/16” or 417/16” 45” or 48” SB453427CCST SB483427CCST 341/2” 24” End Panel 27” 161/2” or 18” Frame Opening Width Cubic Feet SB303427CCST 19. Face frame and cabinet bottom transition from 27″ deep to 24″ deep (standard base depth) with 4 1/2″ fillers at a 45 degree angle.1 • • • • • Mini Touch-Up Kit (MTUK) included. MTUK includes small touch-up marker and small fill stick. Face frame and cabinet bottom transition from 27″ deep to 24″ deep (standard base depth) with 4 1/2″ fillers at a 45 degree angle.8 SB393427CCST 24. See page 408.1 • • • • • Mini Touch-Up Kit (MTUK) included.8 SB483427FCCST 30. FLUTED.2 SB333427CCST 21. 36”.SINK BASE with CLIPPED CORNERS and TILT DOWNS. Custom Modifications AUTHL AUTHR CBO • FTK FTKAV FTKFV CCO CFNTO • • ID INVFRM CFP MIP CFRMO CND • • P RD • • 3/4X ET DRWTK EXB EXL EXR FB FD FFDL FFDR • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC • DRT PE CG • • Effective March 17. or 357/16” 21”.6 SB423427FCCST 26. or 42” SB303427CCST SB333427CCST SB363427CCST SB393427CCST SB423427CCST 341/2” 24” End Panel 27” 237/16”. • RD available to a minimum of 9″ deep.0 SB363427FCCST 22. 327/16”. or 33” Frame Opening Width 45” or 48” 387/16” or 417/16” SB453427FCCST SB483427FCCST 341/2” 24” End Panel 27” 161/2” or 18” Frame Opening Width DRWTK EXB EXL EXR FB FD FFDL FFDR • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC • DRT PE CG • • SB303427FCCST 19. 267/16”. 33”.2 SB333427FCCST 21. 24”. • 3/8″ thick.4 SB24D 14.4 SB45D 25. 2 3/4″ clearance from back of drawer to interior back of cabinet. garbage disposal and plumbing fit opening.Model SINK BASE with DRAWER BELOW SB24D L or R 341/2” 24” 200 SB24D SB27D SB30D SB33D SB36D 341/2” 24” 39”. MTUK includes small touch-up marker and small fill stick. Verify that sink.1 SB30D 17. 2014 .6 SB36D 21.8 SB48DCS 27. • Trimmable. 42”. 45″. Plumbing going through floor will interfere with drawer operation. MODIFICATIONS No modifications available for these products. 42″.7 SB33D 19.7 SB42D 24. 45”.0 SFB48 • Designed for use with Sink Bases ordered with CFNTO. Face frame opening height for drawer is 4 1/2″. Face frame opening height is 20 1/2″. and 48″ wide Decorative Door Options Construction Upgrades SINK FRONT BOTTOM 48” 231/16” APC 3/4X • • ET PE CG • • 1. Custom Modifications 24” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP CFRMO CND • • MIP P RD • • • DRT DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • *Not available on 39″.7 Drawers are below full cabinet floor.7 SB48D 27. Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG • Effective March 17.4 SB27D 16. Mini Touch-Up Kit (MTUK) included.1 SB39D 22. or 48” SB39D SB42D SB45D SB48DCS BASE CABINETS 341/2” 24” SB48D 341/2” • • • • • • Cubic Feet SB24D L or R 14. 313/4” or 36” 24” 24” FB 11 17 36 FP EXL EXR Decorative Door Options ET • 341/2” EXB • Construction Upgrades ANGLED CORNER SINK BASE DRWTK • • APC DRT BASE CABINETS AUTHL AUTHR • Edges beveled at 45°. Frame 15″ x 15″. Model Wall Width Frame Maximum Sink Width Maximum Sink Depth ACS36 ACS39 ACS42 36″ x 36″ 39″ x 39″ 42″ x 42″ 17″ 21 1/4″ 25 1/2″ 25 3/4″ 30″ 34 1/4″ 27 11/32″ 27 11/32″ 27 11/32″ Custom Modifications AUTHL AUTHR CBO • FTK FTKAV FTKFV • • CCO CFNTO CFP CFRMO CND • • STD • • ID INVFRM • 3/4X P RD • ET DRWTK EXB EXL EXR FB FD FFDL FFDR • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC MIP DRT PE CG • • Effective March 17. 15 18 ” ” 2” ” 15 ”. Integrated soft close hinge not included. 211/4” or 251/2” = False Panel /1 6 ”. Addison CS36 door panels feature a unique raised profile due to the narrow panel width.9 ACS39 L or R 33.7 CS42 L or R 38. 8” 12 or 1 24” ”o 36 ”. • Mini Touch-Up Kit (MTUK) included. Mini Touch-Up Kit (MTUK) included.9 CS39 L or R 33. see page 406. MTUK includes small touch-up marker and small fill stick. 271/2”. 201 Custom Modifications CBO • FTK CCO CFNTO CFP CFRMO CND FTKAV FTKFV ID INVFRM 3/4X 2” r4 ”o FD FFDL FFDR MIP P RD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • CG PE • ACS36 L or R 25. Frame 12″ x 12″. CS39: Wall width: 39″ x 39″. • For sufficient dishwasher door clearance and loading/unloading space. r4 39 ”o 36 ” 39 Max. • Full overlay styles use 38NPOHINGE.Model SQUARE CORNER SINK BASE r4 12 or ”. CS42: Wall width: 42″ x 42″. † ACS42 has butt doors. MTUK includes small touch-up marker and small fill stick. r4 2” 36 341/2” Cubic Feet 297/8-36” 311/2-39” 335/8-42” 24” 24” • • • • • • • • • CS36: Wall width: 36″ x 36″. a 15″ wide base cabinet is recommended for use between a corner sink base and dishwasher.9 ACS42 2” ”. Toekick and toekick retainer shipped unattached from the face frame.9 ”. Sink Widths if cut out is 4″ back from face of front frame 299/16” 24” 17”. Frame 18″ x 18″. 2014 .7 † 38. For sufficient dishwasher door clearance and loading/unloading space. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of CS. a 15″ wide base cabinet is recommended for use between a corner sink base and dishwasher. 39 ”o 39 203/8” CS36 L or R 25. † ACSF42 has butt doors. • Full overlay styles use 38NPOHINGE. 39 231/4” 3/4X ET RD DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB RT EXL EXR SCPDRW FB FD FFDL FFDR TD TVRAV TVRFV TVRVV VTK FPEB Decorative Door Options Construction Upgrades APC P DRT CG PE ACSFB36 1.Model ANGLED CORNER SINK FRONT without SINK FLOOR Cubic Feet ACSF36 L or R 3.0 • Designed for use with Angled Corner Sink Front.3 ACSF42 FP 341/2” 202 = False Panel • Edges beveled at 45°. see page 406. • Toekick and toekick retainer shipped unattached from the face frame. Sink Widths if cut out is 4″ back from face of front frame AUTHL AUTHR CBO CCO BASE CABINETS • FTK FTKAV FTKFV • • ID CFNTO CFP CFRMO CND STD STD • • INVFRM MIP ANGLED CORNER SINK FRONT BOTTOM ” or 42” 36”.3 † 3. 2014 . See next item. • 3/8″ thick. Model Wall Width Frame Maximum Sink Width Maximum Sink Depth ACSF36 ACSF39 ACSF42 36″ x 36″ 39″ x 39″ 42″ x 42″ 17″ 21 1/4″ 25 1/2″ 25 3/4″ 30″ 34 1/4″ 27 11/32″ 27 11/32″ 27 11/32″ Custom Modifications Max. • Angled corner sink front bottom required for field installation.3 ACSF39 L or R 3. Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG • Effective March 17. Order separately. MODIFICATIONS No modifications available for these products.0 ACSFB42 1.0 ACSFB39 1. or 36” Cubic Feet CNTYSB30 17. CabMat is removable for cleaning.2 3.6 CNTYSB36 21.0 4. 42″. 33”. • Mini Touch-Up Kit (MTUK) included. CabMat features a grey sloped mat to capture spills.7 131/2” 341/2” 24” CNTYSB30 CNTYSB33 CNTYSB36 39”.1 Mini Touch-Up Kit (MTUK) included.8 CNTYSB48CS 27. 42”. 45″.7 CNTYSB33CM 19. and 48″ wide Decorative Door Options Construction Upgrades 48” APC 3/4X ET • 131/2” PE CG • • 341/2” 24” CNTYSB48 COUNTRY SINK BASE with CABMAT™ NEW 131/2” • • • • 341/2” 24” CNTYSB30CM 17. 45”. or 48” 203 • 13 1/2″ panel can be trimmed up to 12″. MTUK includes small touch-up marker and small fill stick.4 CNTYSB45 25.7 CNTYSB48 27. 131/2” AUTHL AUTHR CBO • 24” CNTYSB39 CNTYSB42 CNTYSB45 CNTYSB48CS CCO CFNTO • • FTK FTKAV FTKFV ID • • • INVFRM CFP CFRMO CND DRT • MIP P RD • DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • *Not available on 39″. 13 1/2″ panel can be trimmed to 12″.7 CNTYSB33 19. MTUK includes small touch-up marker and small fill stick. 2014 BASE CABINETS Custom Modifications 341/2” .3 33″ 24″ CNTYSB36CM 5.9 30″ 24″ CNTYSB33CM 4.6 4.6 CNTYSB36CM 21.7 CNTYSB42 24.7 36″ 24″ Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND ET DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17. Liquid Capacity Model Cabinet Size Quarts Liters Width Depth CNTYSB30CM 4.1 CNTYSB39 22.Model COUNTRY SINK BASE 30”. Space Min.39″ wide . Addison BC36 door panels feature a unique raised profile due to the narrow panel width. Adjustable 15″ deep shelves. BASE CORNER 341/2” 24” BC36 L or R BC39 L or R BC42 L or R BC45 L or R BC48 L or R . At Max. At Max. it is not recommended to place BC cabinets next to 27″ deep appliances. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV ID INVFRM • MIP P RD • 3/4X • • ET DRWTK RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB FD FFDL FFDR FPEB • • • • • • TD TVRAV TVRFV TVRVV VTK RT SCPDRW • Decorative Door Options Construction Upgrades APC • DRT PE CG • • Effective March 17. A Min.42″ wide . Pull* C Max. • The L or R in the cabinet nomenclature indicates the location of the void to ensure clearance. L or R indicates void.1 BC39 L or R 19.4 BC45 L or R 24. 2014 . Space B Max.30″ wide .6 BC42 L or R 24. F Actual Cabinet *Minimum/maximum space between inside edge of door and face of filler/adjoining cabinet.4 BC48 L or R 26. 204 C C A E Clearance Adjacent Cabinet Max.45″ wide • • • • • BC36 L or R 16.27″ wide . shipped unattached. • The adjoining run of cabinets will cover the void. • Remember to use 3″ filler on adjoining cabinets. Face Frame and Door on End modification not available on the void side of the cabinet. 1 1/2″ pull is not included in minimum and maximum list.0 Includes one 3″ filler. • BCFW specifies full width blind corner base cabinet. E Partial Overlay At Min. L (left) void shown. Space D Cabinet Opening BC36 BC39 36″ 39″ 6″ 4 1/2″ 42″ 43 1/2″ 7 1/2″ 9″ 1 3/4″ 3 1/4″ 7 3/4″ 7 3/4″ 2 1/2″ 4″ 8 1/2″ 8 1/2″ 27″ 30″ BC42 BC45/BC45PO BC48/BC48PO BCFW36 BCFW39 BCFW42 BCFW45/BCFW45PO BCFW48/BCFW48CPO/BCFW48PO BCFW48SP 42″ 45″ 48″ 36″ 39″ 42″ 45″ 48″ 48″ 6″ 4 1/2″ 3″ 5″ 3 1/2″ 9″ 7 1/2″ 4 1/2″ 4 1/2″ 48″ 49 1/2″ 51″ 41″ 42 1/2″ 51″ 52 1/2″ 52 1/2″ 52 1/2″ 13 1/2″ 15″ 16 1/2″ 7 1/2″ 9″ 13 1/2″ 15″ 18″ 18″ 1 3/4″ 3 1/4″ 4 1/4″ 1 3/4″ 3 1/4″ 1 3/4″ 3 1/4″ 3 1/4″ 3 1/4″ 7 3/4″ 7 3/4″ 7 3/4″ 6 3/4″ 6 3/4″ 10 3/4″ 10 3/4″ 7 3/4″ 7 3/4″ 2 1/2″ 4″ 5 1/2″ 2 1/4″ 4″ 2 1/2″ 4″ 4″ 4″ 8 1/2″ 8 1/2″ 8 1/2″ 7 1/2″ 7 1/2″ 11 1/2″ 11 1/2″ 8 1/2″ 8 1/2″ 39″ 42″ 45″ 36″ 39″ 42″ 45″ 48″ 48″ Model BASE CABINETS Top View E* Full Overlay At Min.Front View Base Corner Cabinets • BCs use the wall space the nomenclature implies and may be pulled up to 3″ to accommodate odd dimensions in a kitchen. Space F Wall Base Square Corner Cabinet D Wall Cabinet D E Cabinet B 3” Filler NOTE: Full overlay styles must be pulled an additional 1 1/2″ to ensure proper drawer/pull clearance. 45″ wide BCFW48 L or R .0 BCFW48 L or R 27. Custom Modifications 24” AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV ID INVFRM • MIP P RD • 3/4X • • ET DRWTK RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB FD FFDL FFDR FPEB • • • • • • TD TVRAV TVRFV TVRVV VTK RT SCPDRW • Decorative Door Options Construction Upgrades APC • DRT PE CG • • Effective March 17. L (left) void shown. Addison BCFW36 door panels feature a unique raised profile due to the narrow panel width. 205 Custom Modifications BC45PO L or R BC48PO L or R AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV ID INVFRM • MIP RD • APC 3/4X • • ET DRWTK RECTKALL RECTKL RECTKBK RECTKR • EXB EXL EXR FB • • • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades BASE CORNER FULL WIDTH P DRT BASE CABINETS 24” • • • • • • • • • Cubic Feet PE CG • • BCFW36 L or R 21. Pull-out features four adjustable wood shelves with chrome surround.39″ wide 341/2” 24” BCFW42 L or R . Face Frame and Door on End modification not available on the void side of the cabinet.4 BCFW45 L or R 26.7 BCFW36 L or R . Face Frame and Door on End modification not available on the void side of the cabinet. shipped unattached.7 BCFW42 L or R 24.4 BC48PO L or R 26.48″ wide 341/2” • • • • • Includes one 3″ filler. 10″ of adjacent space is required with no obstruction beyond 1 3/4″ in front of the cabinet face frame.36″ wide BCFW39 L or R . shipped unattached. Adjacent cabinet hardware may interfere with adjustable shelf position or pull-out.Model BASE CORNER with PULL-OUT 45” or 48” 341/2” 42” or 45” BC45PO L or R 24. Smart Stop not available. For pull-out to open.1 BCFW39 L or R 22.42″ wide BCFW45 L or R .0 Not recommended for use next to an appliance deeper than standard cabinet depth. L or R indicates void. L (left) void shown. 2014 . Includes one 3″ filler. Cannot be installed next to a wall. Adjustable 15″ deep shelves. L or R indicates void. Wire pull-out dimensions are 10 3/4″ W x 17 1/4″ D x 2 11/16″ H. 2014 . L or R indicates void. Includes one 3″ filler. Custom Modifications 24” BCFW48SP L or R .7 BCFW48SP L or R • • • • • • P • Construction Upgrades 341/2” EXB Decorative Door Options ET • 17” DRWTK RECTKALL RECTKL RECTKBK RECTKR • BCFW45PO L or R FTK BASE CORNER FULL WIDTH with ROLL TRAYS & SWING-OUT RD • Construction Upgrades BASE CORNER FULL WIDTH with PULL-OUT P DRT Includes one 3″ filler. do not install next to a wall or appliance. Adjacent cabinet hardware may interfere with adjustable shelf position on pull-out. Adjacent cabinet hardware may interfere with adjustable shelf position on pull-out.Model BASE CORNER FULL WIDTH with CURVED PULL-OUT 341/2” 24” Cubic Feet 27. L (left) void shown. L (left) void shown. Maximum Weight Capacity: 65 lbs. shipped unattached. Cannot be installed next to a wall. Smart Stop not available. For pull-out to open. L or R indicates void. Custom Modifications 206 AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV ID INVFRM • MIP BASE CABINETS 45” or 48” 341/2” 24” BCFW45PO L or R BCFW48PO L or R • • • • • • • • • APC 3/4X • • EXL EXR FB • • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • CG PE • 26. 10″ of adjacent space is required with no obstruction beyond 1 3/4″ in front of the cabinet face frame. per shelf. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTKAV FTKFV ID INVFRM MIP RD APC 3/4X • • DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR • EXB EXL EXR FB • • • RT SCPDRW TD FD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • • VTK • Decorative Door Options ET PE CG • • 27. shipped unattached. Pull-out features four adjustable wood shelves with chrome surround. Not recommended for use next to an appliance deeper than standard cabinet depth. Face Frame and Door on End modification not available on the void side of the cabinet. Smart Stop not available. Swing-out hinged opposite door.48″ wide AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV ID INVFRM • MIP P RD • 3/4X • • ET DRWTK RECTKALL RECTKL RECTKBK RECTKR • • EXB EXL EXR FB • • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC DRT PE CG • • Effective March 17. Swing-out is 3/4″ laminated furniture board. Cannot be installed next to a wall. Face Frame and Door on End modification not available on the void side of the cabinet.7 BCFW48CPO L or R • • • • • • • • • Includes one 3″ filler.0 BCFW48PO L or R 27. Roll trays and swing-outs installed. L (left) void shown. For pull-out to fully open. Pull-out features 2 adjustable kidney shaped pull-outs. 9 3/4″ of adjacent space is required with no obstruction beyond 1 1/8″ in front of the cabinet face frame. shipped unattached. L or R indicates void. Wire pull-out dimensions are 10 3/4″ W x 17 1/4″ D x 2 11/16″ H. Insert swing on a base corner full width cabinet is 17″.7 Not recommended for use next to an appliance deeper than standard cabinet depth. ” ” 19 19 36 ET DAB36S L or R DIAGONAL BASE with FULL HEIGHT DOOR & LAZY SUSAN 271/2” Custom Modifications 36 ” 341/2” 299/16” AUTHL AUTHR 24” 24” 24” 3/4X CFRMO Decorative Door Options Construction Upgrades APC 17” CBO CCO CFNTO • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFP CFRMO CND ET DRT DRWTK • MIP P • RD • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC 207 CG PE BLS36 L or R BASE LAZY SUSAN CORNER with FULL HEIGHT DOOR and LAZY SUSAN (With Center Hinge Door) P CND Decorative Door Options Construction Upgrades APC CFRMO BASE CABINETS 12” 12” PE CG • • Effective March 17. Drum diameter is 31 1/8″ and composed of 1/8″ thick hardboard. Custom Modifications 24” 24” AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO INVFRM CFP MIP P CND RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB FD FFDL FFDR VTK FFDL FFDR RT SCPDRW TD TVRAV TVRFV TVRVV EXB EXL EXR FB FD FPEB CG PE 25. 2014 . Cabinet is drum-shaped. Integrated soft close hinge not included.0 BLS36DR BASE LAZY SUSAN CORNER (With Revolving Door) (Partial Overlay styles only) 36” 91/8” 341/2” 36” 43/4” 24” 12 3 / 4” 91/8” 43/4” • • • • • • • BLS36DR wall width is 36″ x 36″. See Panels & Skins section for BLS BEP if used at end of cabinet run. Integrated soft close hinge not included. see page 406. BLS white plastic shelves are 28″ diameter with a chrome pole. • Full overlay styles use 38NPOHINGE. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of BLS. Addison door panels feature a unique raised profile due to the narrow panel width.9 ” • Uses two white 24″ round plastic shelves on a pole for all styles. Custom Modifications 24” 24” AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO INVFRM CFP MIP 3/4X ET 36” 91/8” 341/2” 36” 43/4” 24” 12 3 / 4” 91/8” 43/4” 12” 12” • • • • • • • • RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB RT EXL EXR SCPDRW FB FD FFDL FFDR TD TVRAV TVRFV TVRVV VTK FPEB 20. Available in partial overlay styles only. adjoining cabinets create sides.0 BLS36 L or R wall width is 36″ x 36″. BLS white plastic shelves are 28″ diameter with a chrome pole. adjoining cabinets create sides.Model Cubic Feet 20. See Panels & Skins section for BLS BEP if used at end of cabinet run. Drum diameter is 31 1/8″ and composed of 1/8″ thick hardboard. Cabinet is drum-shaped. Addison door panels feature a unique raised profile due to the narrow panel width. Nomenclature for asymmetrical cabinets reads as follows: First set of numbers = left side of cabinet dimensions. Adjustable crisscross shelves. Lower shelf is mounted to floor. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of BER. shelves cannot be retrofitted.5 BER3633 L or R 24. Legs at the front frames are 9″ on 33″ and 12″ on 36″ leg. Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM MIP 3/4X ET • 33” or 36” 33” or 36” 87/8” 341/2” 33” or 36” 33” or 36” 24” 3 36 3” ” . • Full overlay styles use 38NPOHINGE. CBO CCO CFNTO • • • FTK FTKAV FTKFV • • ID APC 3/4X 87/8” 18 3 /8” 33” or 36” 3 36 3” ” . see page 406. Addison door panels feature a unique raised profile due to the narrow panel width. Adjustable crisscross shelves. Upper shelf is mounted to fixed shelf. Second set of numbers = right side of cabinet dimensions.31 5 33 5 /8” /8” ASYMMETRICAL BASE EASY REACH 24” • • • • 9” or 12” 24” • • • • DRWTK EXB EXL EXR FB FD FFDL FFDR P RD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC DRT • • 18 3 /8” BASE CABINETS INVFRM CFP • • 33” or 36” 25. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of BER.0 BER36 L or R 25. 2014 .9 DAB36SLS L or R DIAGONAL BASE with FULL HEIGHT DOOR & SUPER LAZY SUSAN 36” Cubic Feet CG PE • BER3336 L or R 24. Fixed shelf is 3/4″ thick laminated furniture board. BER36 L or R wall width is 36″ x 36″.5 BER3336 L or R wall width is 33″ x 36″.9 BER33 L or R wall width is 33″ x 33″. BER3633 L or R wall width is 36″ x 33″. 36 ” 271/2” Custom Modifications AUTHL AUTHR 299/16” 341/2” 24” 24” 17” 24” 24” 208 Due to fixed shelf mounting.Model 36 ” ” 19 19 ” 36” • Features two 28″ plywood revolving shelves with a 1″ plywood lip. Integrated soft close hinge not included. Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM • ET EXB EXL EXR FB FD FFDL FFDR MIP P RD RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades 3/4X DRWTK • • APC DRT PE CG • Effective March 17. Integrated soft close hinge not included.31 5 33 5 /8 /8” ” 33” or 36” 341/2” 33” or 36” 24” 24” 9” or 12” 24” • • • • • CFRMO CND ET DRT DRWTK EXB EXL EXR • MIP P FB FD FFDL FFDR • RD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades BASE EASY REACH PE CG • • BER33 L or R 24. SLS33 . • Integrated soft close hinge not included. SLS36 . shelves cannot be retrofitted. Rotating bottom shelf is continuous. Rotating top shelf is segmented with Full Extension hardware. AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM • ET DRWTK EXB EXL EXR FB FD FFDL FFDR MIP P RD RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades 3/4X DRT • • APC 209 Decorative Door Options Construction Upgrades 3/4X DRWTK • • APC DRT PE CG • Effective March 17. Custom Modifications Due to fixed shelf mounting. • Addison door panels feature a unique raised profile due to the narrow panel width. 2014 BASE CABINETS AUTHL AUTHR Due to fixed shelf mounting. Features two plywood revolving shelves with a 1″ plywood lip. Upper shelf is mounted to fixed shelf. Chrome rail surrounds both shelves. Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SSS. Addison door panels feature a unique raised profile due to the narrow panel width. Custom Modifications FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM MIP ET • SUPER LAZY SUSAN 33” or 36” 87/8” 33” or 36” 24” 33” or 36” 18 3 /8” 341/2” 3 36 3””. Integrated soft close hinge not included. . Fixed shelf is 3/4″ thick laminated furniture board. • Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SLS.31 5 3 3 5 /8 /8” ” 33” or 36” 24” 9” or 12” 24” EXB EXL EXR FB FD FFDL FFDR P RD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • CG PE • SLS33 L or R 24. Lower shelf is mounted to floor.Model 87/8” 36” 18 3 /8” 36 ”- 33 5/ 8” 36” 341/2” 24” 36” 12” 24” 30. Segmented shelves are plywood.Susans are 32″ diameter. shelves cannot be retrofitted.5 SSS36 L or R SEGMENTED SUPER LAZY SUSAN 36” Cubic Feet 24” • • • • • • • • • SSS36 L or R wall width is 36″ x 36″.0 SLS36 L or R 30. Fixed shelf is 3/4″ thick laminated furniture board.5 • • • • • SLS33 L or R wall width is 33″ x 33″. Chrome rail height is 2 13/16″. SLS36 L or R wall width is 36″ x 36″.Susans are 28″ diameter. AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM MIP • SUPER LAZY SUSAN with CHROME RAIL 87/8” 341/2” 33” or 36” 33” or 36” 3 36 3””. Chrome rail height is 2 13/16″. • Addison door panels feature a unique raised profile due to the narrow panel width. • Chrome rail surrounds both shelves.5 • SLSCR33 L or R wall width is 33″ x 33″. Lower shelf is mounted to floor.31 5 3 3 5 /8 /8” ” 33” or 36” 33” or 36” 18 3 /8” BASE CABINETS ET 24” 9” or 12” 24” 24” 9” or 12” 24” EXB EXL EXR FB FD FFDL FFDR P RD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades 3/4X DRWTK • • APC DRT CG PE • SLSCR33 L or R 30. Lower shelf is mounted to floor. SLSW33 L or R . • Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SLSCR. • SLSCR33 .Model SOLID WOOD SUPER LAZY SUSAN 33” or 36” 87/8” 33” or 36” 33” or 36” 18 3 /8” 341/2” 24” 9” or 12” 24” 210 3 36 3””.Susans are 28″ diameter. shelves cannot be retrofitted. Fixed shelf is 3/4″ thick laminated furniture board. Features two solid hardwood revolving shelves. Fixed shelf is 3/4″ thick laminated furniture board.0 SLSW36 L or R 30.31 5 3 3 5 /8 /8” ” 33” or 36” 24” Cubic Feet SLSW33 L or R 24. • Addison door panels feature a unique raised profile due to the narrow panel width. SLSCR36 . FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM • ET EXB EXL EXR FB FD FFDL FFDR MIP P RD RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades 3/4X DRWTK • • APC DRT PE CG • Effective March 17. • Integrated soft close hinge not included. 2014 . Custom Modifications Due to fixed shelf mounting.Susans are 32″ diameter. SLSW36 L or R wall width is 36″ x 36″.5 SLSCR36 L or R 30. • Features two plywood revolving shelves with a 1″ plywood lip. shelves cannot be retrofitted. • Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SLS. Upper shelf is mounted to fixed shelf. • Integrated soft close hinge not included. Upper shelf is mounted to fixed shelf.Susans are 28″ diameter.5 • • • • • SLSW33 L or R wall width is 33″ x 33″. Custom Modifications AUTHL AUTHR Due to fixed shelf mounting.Susans are 32″ diameter. SLSW36 L or R . SLSCR36 L or R wall width is 36″ x 36″. shelves cannot be retrofitted. SLS3633 L or R wall width is 36″ x 33″. Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SLS.1 SLSW3633 L or R 29. Features two solid hardwood revolving shelves. Nomenclature for asymmetrical cabinets reads as follows: First set of numbers = left side of cabinet dimensions. Fixed shelf is 3/4″ thick laminated furniture board. Fixed shelf is 3/4″ thick laminated furniture board. All Asymmetrical Super Susan shelves are 28″ diameter. Addison door panels feature a unique raised profile due to the narrow panel width. Lower shelf is mounted to floor. All Asymmetrical Super Susan shelves are 28″ diameter. Lower shelf is mounted to floor. Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SLS. shelves cannot be retrofitted.Model ASYMMETRICAL SUPER LAZY SUSAN 33” or 36” 87/8” 33” or 36” 33” or 36” 18 3 /8” 341/2” 3 36 3””. Second set of numbers = right side of cabinet dimensions. Custom Modifications AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM • ET EXB EXL EXR FB FD FFDL FFDR MIP P RD RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades 3/4X DRWTK • • APC DRT PE CG • Effective March 17.31 5 3 3 5 /8 /8” ” 24” 9” or 12” 24” • • • • • 24” • • • Due to fixed shelf mounting.1 SLS3633 L or R 29. Addison door panels feature a unique raised profile due to the narrow panel width. Custom Modifications AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM MIP 3/4X ET P RD 87/8” 33” or 36” 24” Due to fixed shelf mounting. Upper shelf is mounted to fixed shelf. 2014 . 33” or 36” 18 3 /8” 341/2” 3 36 3””.1 SLS3336 L or R wall width is 33″ x 36″. Nomenclature for asymmetrical cabinets reads as follows: First set of numbers = left side of cabinet dimensions. Integrated soft close hinge not included. Features two plywood revolving shelves with a 1″ plywood lip. Second set of numbers = right side of cabinet dimensions. SLS3336 L or R 29.31 5 3 3 5 /8 /8” ” 33” or 36” 24” • • • • • 9” or 12” 24” • • • RECTKALL RECTKL RECTKBK RECTKR • EXB EXL EXR FB FD FFDL FFDR RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • CG PE • ASYMMETRICAL SOLID WOOD SUPER LAZY SUSAN DRWTK Decorative Door Options Construction Upgrades APC DRT • • 33” or 36” 211 BASE CABINETS 33” or 36” Cubic Feet • SLSW3336 L or R 29. SLSW3633 L or R wall widths is 36″ x 33″.1 SLSW3336 L or R wall width is 33″ x 36″. Upper shelf is mounted to fixed shelf. Integrated soft close hinge not included. Second set of numbers = right side of cabinet dimensions. Chrome rail height is 2 13/16″. Integrated soft close hinge not included. Addison door panels feature a unique raised profile due to the narrow panel width. 2014 .5 BRDB36 L or R BASE ROTATING DEEP BIN EXB Decorative Door Options Construction Upgrades 3/4X DRWTK • • APC DRT BRDB36 wall width is 36″ x 36″. Addison door panels feature a unique raised profile due to the narrow panel width. Nomenclature for asymmetrical cabinets reads as follows: First set of numbers = left side of cabinet dimensions. Custom Modifications BASE CABINETS AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM MIP ET • P RD 36” 87/8” 36” 18 3 /8” 341/2” 36 ”- 33 5/ 8” 36” 24” 36” 12” 24” 24” • • • • • • • • RECTKALL RECTKL RECTKBK RECTKR • EXL EXR FB FD FFDL FFDR RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • CG PE • 30. All Asymmetrical Super Susan shelves are 28″ diameter. SLSCR3633 L or R wall width is 36″ x 33″. Lower shelf is mounted to floor.Model ASYMMETRICAL SUPER LAZY SUSAN with CHROME RAIL 33” or 36” 87/8” 18 3 /8” 341/2” 33” or 36” 33” or 36” 3 36 3””. Inside bottom of upper deep susan to the bottom of face frame cross-rail is 14 1/8″ high.5 SLSCR3336 L or R wall width is 33″ x 36″. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of BRDB. Bins are 6″ deep. Fixed shelf is 3/4″ thick laminated furniture board.31 5 3 3 5 /8 /8” ” 33” or 36” • • • • 24” • • 9” or 12” 24” 212 24” 24” • • • Cubic Feet SLSCR3336 L or R 30. Integrated soft close hinge not included. Custom Modifications AUTHL AUTHR Due to fixed shelf mounting. Not available in asymmetrical applications. FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM • ET EXB EXL EXR FB FD FFDL FFDR MIP P RD RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades 3/4X DRWTK • • APC DRT PE CG • Effective March 17. Chrome rail surrounds both shelves.5 SLSCR3633 L or R 30. BRDB36 shelves are 30″ diameter. Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SLS. Upper shelf is mounted to fixed shelf. shelves cannot be retrofitted. Inside bottom of lower deep susan to the fixed shelf is 10″ high. Features two plywood revolving shelves with a 1″ plywood lip. 2014 . 87/8” 85/8” 285/32” 1215/16” 2111/16” Custom Modifications AUTHL AUTHR 36” 24” FTK CBO CCO • • FTKAV FTKFV ID CFNTO CFP CFRMO CND INVFRM MIP P RD DRWTK EXB EXL EXR FB FD FFDL FFDR RECTKALL RECTKL RECTKBK RECTKR RT SCPDRW TD TVRAV TVRFV TVRVV VTK DRT • 36” • 3/4X ET FPEB • Decorative Door Options Construction Upgrades APC 213 Decorative Door Options Construction Upgrades 24” FD • 33 5/ 8” AUTHL AUTHR PE CG • Effective March 17. cabinet sides will be unfinished. Entire unit rotates when center pull-outs are in closed position. Integrated soft close hinge not included. Features four half-moon bins (8 3/8″ x 25 1/2″ each) with plywood shelves and chrome rail sides. Allow for proper clearance of drawer head when specifying corner drawer cabinets next to appliances. Exterior height of bottom 2 drawer boxes is 7 3/4″. Cabinet sides will always be Natural Maple laminate. *Standard depth cabinet (24″) does not require filler. If PE or APC is specified.0 3CDB36 THREE DRAWER CORNER CABINET • • • • • 41/2” Must be installed between 2 cabinets. Custom Modifications 24” CBO CCO • • CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB ”36 87/8” 251/2” 36” 18 3 /8” 83/8” FTK FTKAV FTKFV ID INVFRM MIP P RD • 24” 36” 12” APC 3/4X ET • 95/8” FFDL FFDR RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV • VTK • CG PE • BASE CABINETS 191/8” 233/8” 341/2” 15. Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of LSP. Addison door panels feature a unique raised profile due to the narrow panel width.Model NEW 30. Will have less than 3/4″ overlay side reveal for clearance purposes. A B Dimension Dimension 24″* 0″ 25″ 3/4″ 26″ 1 3/4″ 27″ 2 3/4″ 28″ 3 3/4″ 29″ 4 3/4″ 30″ 5 3/4″ A indicates depth of adjacent appliance or cabinet. Center pull-outs have Smart Stop guides and operate independently.5 LSP36 L or R LAZY SUSAN PULL-OUT 36” Cubic Feet 36” • • • • • • 341/2” LSP36 L or R wall width is 36″ x 36″. B indicates minimum space needed between appliance/deeper cabinet and corner drawer base to insure proper operation of drawers. RECTKBK.8 BFH9COA 26. AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV ID CFNTO CFP CFRMO CND DRT INVFRM 3/4X ET EXL EXR FB FD FFDL FFDR MIP P RD RECTKALL RECTKL RECTKBK RECTKR RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades • EXB • • APC DRWTK PE CG • Effective March 17. 24” 135˚ B 24” CND • Construction Upgrades APC CFRMO • *Available only on 12″ deep side of cabinet Hinging Options A BASE CABINETS 225 CFP Custom Modifications B A B Model Dimension Dimension BFH6COA 6″ 15 15/16″ BFH9COA 9″ 18 15/16″ BFH12COA 12″ 21 15/16″ A indicates back width of cabinet and wall space. RECTKL and RECTKR cannot be specified on the same cabinet.4 One adjustable shelf. RECTKL and RECTKR cannot be ordered when RD is specified. 2014 .6 BFH12COA 31. Specify door hinging. Custom Modifications 12” 12” LL RR (shown) 90 24” 135 135 AUTHL AUTHR CBO CCO CFNTO •* • • • 45 90 FTK LR Top View RL FTKAV FTKFV ID INVFRM • MIP 3/4X ET • 135 DEGREE CORNER OUTSIDE BASE 24” A 24” 225˚ 341/2” DRT DRWTK EXB EXL EXR FB FD • P RD • RECTKALL RECTKL RECTKBK RECTKR •+ RT SCPDRW TD TVRAV TVRFV TVRVV • FFDL FFDR FPEB • •* VTK • + RECTKALL not available Decorative Door Options PE CG • • BFH6COA 21. Full overlay styles use 38NPOHINGE. Cabinets constructed with top. RR shown.4 BTC12LR 14.4 BTC12RR 14.6 • Doors are hinged on outside of frame. see page 406. Depth can be reduced to a minimum of 18″.4 BTC12RL 14. B indicates face frame width. • Adjustable shelves cannot be removed from the cabinet.Model BASE TRANSITION CABINET 12” 24” 341/2” 12” • • • • • • 17” (Diagonal Front Width) 214 Cubic Feet BTC12LL 14. 6 Includes Filing System Hardware Kit (FSHK). does not feature soft close guide. Custom Modifications 18 AUTHL AUTHR FTK CBO CCO • • FTKAV FTKFV ID CFNTO INVFRM • CFP MIP CFRMO P 3/4X ET 24” or 30” 341/2” • • • • RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB RT EXL EXR SCPDRW FB FD FFDL FFDR TD TVRAV TVRFV TVRVV VTK FPEB Decorative Door Options CG PE • • TWO DRAWER BASE with FILE DRAWER CND • Construction Upgrades APC 2DB24FD 14. AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV ID CFRMO CND DRT DRWTK EXB EXL EXR FB FD INVFRM MIP P RD RECTKALL RECTKL RECTKBK RECTKR RT SCPDRW TD 3/4X ET • TVRAV TVRFV TVRVV 24” 671/2 ” 18 3 / 8” 24 13 5 24” 671/2 3 /8” • • • • • • VTK • CG PE • 14. Custom Modifications 24” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO • 3/4X CFP INVFRM MIP • ET CFRMO CND DRT • P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC 215 Decorative Door Options BEC24 24” FPEB BASE CABINETS APC FFDL FFDR • Construction Upgrades BASE END CABINET 341/2” CFP • • 24” CFNTO PE CG • Effective March 17. Cabinet may be installed against either end of a run. 225˚ Custom Modifications B 24” Cubic Feet A B Model Dimension Dimension BFH21CIA 21″ 11 3/32″ BFH24CIA 24″ 14 3/32″ BFH27CIA 27″ 17 3/32″ A indicates back width of cabinet and wall space. B indicates face frame width.3 Wall width is 24″ x 24″. Cabinets constructed with top.8 BFH24CIA 34.9 BFH27CIA 40. Drawers utilize 125 lb. 24″ W x 24″ D x 34 1/2″ H. One adjustable shelf. 2014 .4 • Doors are hinged on outside of frame. See page 326. full extension progressive sidemount guide. Depth can be reduced to a minimum of 21″.3 2DB30FD 17. which accommodates letter and legal filing.Model 135 DEGREE CORNER INSIDE BASE A 135˚ A 341/2” 24” 24” B BFH21CIA 29. • Adjustable shelves cannot be removed from the cabinet. 24″ from outside corner point to frame face. Exterior drawer box height is 10″. FSHK also sold separately. Exterior drawer box height is 10″. 33”.4 2DB27 15.1 • Exterior drawer box height is 10″. Posts and pegged board available as accessories for field installation. 30”. 216 BASE CABINETS Model Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO CFP 3/4X INVFRM MIP • NEW TWO DRAWER BASE with PEGGED DISH ORGANIZER 36” RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options CG PE • 21. Includes 3/8″ thick removable pegged board in top drawer. Custom Modifications 341/2” 24” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM • 3/4X CFRMO CND ET DRT • MIP P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17.8 2DB24 14.NEW TWO DRAWER BASE 18”. Additional posts available as an accessory.6 2DB30 17. See page 407.1 2DB36PDO • • • • • P • ET CND • Construction Upgrades APC CFRMO Includes 8 wooden posts. 2014 .8 2DB36 21.7 2DB33 18. or 36” 341/2” 24” Cubic Feet 2DB18 11. 21”.1 2DB21 12. See page 407. 27”. 24”. Posts and pegged board available as accessories for field installation.Model TWO DRAWER BASE with ROLL TRAY 18”.1 2DB21RT 12. Additional posts available as an accessory. Custom Modifications 341/2” 8” 24” 8” panel can be trimmed up to 61/2” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM 3/4X • • ET CFRMO CND DRT • MIP • P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17. Custom Modifications 341/2” 24” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP 3/4X MIP 30” or 36” P RD • ET • TWO DRAWER BASE. 24”.6 2DB36RT 21.1 2DB36RTPDO • • • • • P • ET CND • Construction Upgrades APC CFRMO BASE CABINETS AUTHL AUTHR Includes a roll tray above the top drawer box.7 2DB33RT 19. See page 407. See page 407. • Exterior height for bottom drawer box is 6 3/8″. Includes 8 wooden posts.8 2DB24RT 14.4 2DB27RT 16. or 36” 341/2” 24” Cubic Feet 2DB18RT 11. DROP-IN RANGE CND DRT • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC CFRMO CG PE • 2DB30DR 17. 2014 . 217 Custom Modifications CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO CFP TWO DRAWER BASE with ROLL TRAY and PEGGED DISH ORGANIZER 3/4X INVFRM MIP • • RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options CG PE • 21. Includes 3/8″ thick removable pegged board in top drawer. 30”.1 2DB30RT 17. 33”.1 • Exterior height of drawer boxes is 6 3/8″.7 2DB36DR 21. 27”. 21”.1 • Includes a roll tray above the top drawer box. *3/4X only available on top drawer. • 3/4X only available on top drawers.7 2DB36DRWD 21. 8” 24” Cubic Feet 8” panel can be trimmed up to 61/2” 3” crossrail can be trimmed to 11/2” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP BASE CABINETS THREE DRAWER BASE 3DB12 3DB15 3DB18 3DB21 341/2” 24” 24”.8 3DB24 14. OCINSTALLKIT is included in 24″ deep warming drawer cabinets (see page 407 for details). 341/2” Custom Modifications 24” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO INVFRM 3/4X • • CFRMO • • MIP • ET P CND RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17. but will not be included when depth is modified.1 Custom Modifications 87/8” 3” 218 2DB30DRWD • Exterior height of bottom drawer box is 6 3/8″.1 • Exterior height of bottom 2 drawer boxes is 6 3/8″. 2014 .1 • Exterior height of bottom 2 drawer boxes is 6 3/8″. DROP-IN RANGE and WARMING DRAWER 30” or 36” 341/2” 17.4 3DB18 11.1 3DB21 12. 30”.1 3DB30* 17. 33”.Model TWO DRAWER BASE. or 36” 3DB24 3DB27 3DB30* 3DB33* 3DB36* 341/2” 24” 3/4X MIP • • RD DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options CG • 3DB12 7.7 3DBB33 19. 33”. 27”. or 36” DRT • PE *Not available on 12″ and 15″ wide THREE DRAWER BASE BUFFET P • ET CND • Construction Upgrades APC CFRMO CG PE • 3DBB30 17.7 3DB33* 19.6 3DB36* 21.8 3DB15 9. Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • •+ ID CFNTO INVFRM CFP CFRMO • • MIP APC 3/4X • • P • ET CND RD DRT DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT • SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • + Not available on 12″ wide Decorative Door Options Construction Upgrades 30”. • For built-in appliance support.6 3DBB36 21.4 3DB27 16. Bread board is 21/32″ thick.1 3DB24SP 14. 18”. All cabinets include white molded plastic tiered cutlery inserts.8 3DB24WTCD 14. Tiered cutlery insert and bread box lid are also available as accessories for field installation. 18”. tiered cutlery insert and bread box lid. See page 398. Top drawer will be slab for all 5 piece drawer and Drawer Front Raised applications.1 3DB21WTCD 12.4 3DB18WTCD 11. and interior height of bottom tier is 1 3/8″.4 • Exterior height for lower drawer boxes is 6 3/8″. 2014 . interior height of top tier is 1 5/8″. or 24” Cubic Feet 3DB15WTCD 9.4 3DB18SP 11. • Wood Tiered Cutlery Divider Drawer is also available as an accessory. Top drawer head flips down to expose bread board and will not align vertically with adjacent base cabinets.4 Includes bread board. • Exterior WTCD drawer box height is 3 3/4″. 401. or 24” 341/2” 24” • • • • • • BASE CABINETS Decorative Door Options Construction Upgrades CG PE • 3DB15SP 9. Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO CFP CFRMO CND DRT • INVFRM MIP P RD • DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X • • ET PE CG • Effective March 17. 341/2” Custom Modifications 24” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO CFP CFRMO CND DRT • INVFRM MIP P RD • DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB 219 • TVRAV TVRFV TVRVV • VTK • *Not available on 15″ wide APC 3/4X ET • THREE DRAWER BASE SPECIAL 15”. See pages 397.Model THREE DRAWER BASE with WOOD TIERED CUTLERY DIVIDER DRAWER 15”. 21”. 9 • Exterior height of bottom drawer box is 10″. does not feature soft close guide. 3/4X not available on deep drawer.7 3DB36WD* 21. full extension progressive sidemounted guide. 27”. 341/2” Custom Modifications 24” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO INVFRM CFP CFRMO • • MIP • THREE DRAWER BASE BUFFET with DEEP DRAWER 30”. • Depth can be reduced to a minimum of 21″. 3/4X not available on deep drawer.1 3DB30WD* 17. • Depth can be reduced to a minimum of 21″. 30”. or 36” 3/4X • • ET RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT • SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC P CND CG PE • 3DBB30DD 17. 2014 . 33”. *3/4X only available on top drawer.4 3DB27WD 16. WARMING DRAWER 24”.Model THREE DRAWER BASE.1 • Exterior height of bottom drawer box is 6 3/8″. 341/2” Custom Modifications 24” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO INVFRM 3/4X • • CFRMO • • MIP • ET P CND RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17.2 3DBB36DD 20. • Bottom drawer utilizes 125 lb. OCINSTALLKIT is included in 24″ deep warming drawer cabinets (see page 407 for details). does not feature soft close guide. 30”. Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO INVFRM CFP CFRMO • • MIP • BASE CABINETS THREE DRAWER BASE with DEEP DRAWER 24”. • Bottom drawer utilizes 125 lb. • For built-in appliance support. but will not be included when depth is modified. full extension progressive sidemounted guide.9 • Exterior height of bottom drawer box is 10″. 33”. or 36” 3/4X • • ET RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT • SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC P CND CG PE • 3DB24DD 14.6 3DB36DD 20.4 3DB30DD 17.6 3DBB33DD 19. or 36” 341/2” 2” 9 3 /8 ” Frame Opening Height 2 1 /2 ” 24” 220 Opening Maximum Opening Maximum Model Width Width Height Height 3DB24WD 21″ 22 1/2″ 9 3/8″ 11 3/8″ 3DB27WD 24″ 25 1/2″ 9 3/8″ 11 3/8″ 3DB30WD 27″ 28 1/2″ 9 3/8″ 11 3/8″ 3DB36WD 33″ 34 1/2″ 9 3/8″ 11 3/8″ Cubic Feet 3DB24WD 14.7 3DB33DD 17. 1 4DB21CIW 12.2 4DB36 20. or 36” 4DB24 4DB27 4DB30 4DB33 4DB36 341/2” 24” Cubic Feet 4DB12 7.4 4DB18 11.8 4DB15 9.8 4DB24CIW 14.4 4DB18CIW 11. Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • •+ ID CFNTO INVFRM CFP CFRMO • • MIP 341/2” 3/4X • • ET CND RD DRT DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT • SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • + Not available on 12″ wide Decorative Door Options Construction Upgrades APC P • *Not available on 12″ and 15″ wide FOUR DRAWER BASE with CUTLERY INSERT WOOD ORGANIZER 221 CG PE • 4DB15CIW 9.1 4DB21 12.9 4DB30 17.4 4DB27 15.8 4DB24 14.4 • Cutlery Insert Wood Organizer is also available as an accessory. 30”.4DB12 4DB15 4DB18 4DB21 341/2” 24” 24”. Custom Modifications 24” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO CFP CFRMO CND DRT • INVFRM MIP P RD • DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X • • ET PE CG • Effective March 17.9 • Exterior height of bottom drawer box is 6 3/8″. See page 397. 2014 BASE CABINETS FOUR DRAWER BASE Model . • Exterior height of bottom drawer box is 6 3/8″. 33”.6 4DB33 19. 27”. See page 398. Drawer head flips down to expose bread board. • Exterior height of bottom drawer box is 6 3/8″.8 4DB24WTCD 14. interior height of top tier is 1 5/8″.4 • Exterior WTCD drawer box height is 3 3/4″. • Wood Tiered Cutlery Divider Drawer is also available as an accessory. 21”. All cabinets include white molded plastic tiered cutlery inserts. 341/2” Custom Modifications 24” 222 AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO CFP CFRMO CND DRT • INVFRM MIP P RD • DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • BASE CABINETS *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X ET • BASE COOKING CENTER 30” or 36” 341/2” 24” • • • • • • • CG PE • BCC30 17. and interior height of bottom tier is 1 3/8″. 2014 . Top drawer with cutlery insert will be slab for all 5 piece drawer and Drawer Front Raised applications. Custom Modifications AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV ID CFNTO CFP CFRMO CND • INVFRM • MIP P RD • 3/4X • • ET DRWTK EXB EXL EXR FB • • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC DRT PE CG • • Effective March 17.4 4DB18WTCD 11.1 Includes bread board.1 4DB21WTCD 12. Tiered cutlery insert and bread box lid are also available as accessories for field installation. 401. Bread board is 21/32″ thick. 30″ and 36″ have 1 roll tray. 18”. or 24” Cubic Feet 4DB15WTCD 9. Will not vertically align with adjacent base cabinets. tiered cutlery insert and bread box lid. See pages 397.7 BCC36 21.Model FOUR DRAWER BASE with WOOD TIERED CUTLERY DIVIDER DRAWER 15”. BASE WASTEBASKET Model Cubic Feet BWB15 9.4 BWB18 11.1 BWB21 12.8 15” 341/2” BWB15 • • • • 24” 18” or 21” 341/2” Door mounted zinc colored Smart Stop guides with 35 quart wastebasket(s) inserted into solid wood support. BWB15 includes one 35 quart grey wastebasket and one trash bag holder. BWB18 and BWB21 include two 35 quart grey wastebaskets. BWB15 and BWB18 can be reduced in depth to 21″. When reduced, BWB15 includes one wastebasket. When reduced, BWB18 includes one wastebasket and one trash bag holder. 223 Custom Modifications BWB18 BWB21 24” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO INVFRM CFP CFRMO CND • • • MIP P • RD • DRT DRWTK EXB EXL EXR •* • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW FB • TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades BASE WASTEBASKET FULL HEIGHT 15” or 18” 341/2” BWB15FH BWB18FH 24” APC 3/4X • • ET BASE CABINETS *Not available on 15″ wide CG PE • BWB15FH 9.4 BWB18FH 11.1 BWB21FH 12.8 • Door mounted zinc colored Smart Stop guides with 50 quart wastebasket(s) inserted into solid hardwood support. • BWB15FH and BWB18FH have one 50 quart grey wastebasket and one trash bag holder. • BWB21FH has two 50 quart grey wastebaskets. Custom Modifications 21” AUTHL AUTHR CBO CCO • • • 341/2” BWB21FH FTK FTKAV FTKFV • • ID CFNTO INVFRM CFP MIP CFRMO P CND RD • DRT DRWTK EXB EXL EXR FB •* • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • *Not available on 15″ wide 24” Decorative Door Options Construction Upgrades APC 3/4X ET • BASE RECYCLING CENTER 27” CG PE • 16.1 BRC27 • Door mounted heavy-duty zinc colored Smart Stop guides with four 27 quart grey bins in solid hardwood support. • Uses standard butt door configuration, doors are joined with metal fastening brackets. • Utilizes 150 lb. full extension hardware. Custom Modifications 341/2” AUTHL AUTHR CBO CCO • • • CFNTO CFP CFRMO CND DRT • DRWTK EXB EXL EXR FB • • • • 24” FTK FTKAV FTKFV • • ID INVFRM 3/4X • • P RD • ET RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC MIP FD PE CG • Effective March 17, 2014 Model RECYCLING TRASH BASE (with REVOLVING DOOR) (Partial Overlay styles only) 341/2” • • • • • 341/2” Cubic Feet RRC36DR 20.0 RRC36 L or R 20.0 Both cabinets have three 32 qt. trash containers. Cabinets are drum-shaped; adjoining cabinets create sides. See Panels & Skins section for BLS BEP if used at end of cabinet run. RRC36DR available in partial overlay only. Addison door panels feature a unique raised profile due to the narrow panel width. Integrated soft close hinge not included. Custom Modifications 224 5” RRC36DR Revolving: available in Partial Overlay styles only. 5” AUTHL AUTHR RRC36 L or R: has hinged doors. FTK CBO CCO • • FTKAV FTKFV ID CFNTO INVFRM BASE CABINETS BASE OPEN BASKET with PLAIN BACK 15” or 18” • • • • • 341/2” 3/4X ET MIP CFRMO P CND RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB RT EXL EXR SCPDRW FB FD FFDL FFDR TD TVRAV TVRFV TVRVV VTK FPEB Decorative Door Options Construction Upgrades APC CFP CG PE BOBP15 9.4 BOBP18 11.0 Matching interior. Includes two Natural finish baskets to slide into stationary rails. Face frame has a profiled inside edge. If ordered with Heirlooming Technique, will not feature sand-through characteristics. To change the top rail valance, specify one of the following modifications: Arch (TVRAV), Furniture (TVRFV), or Straight Valance (TVRVV). Custom Modifications 24” AUTHL AUTHR CBO • STD FTK FTKAV FTKFV • • CCO CFNTO CFP CFRMO CND DRT • ID INVFRM MIP P STD • RD DRWTK EXB EXL EXR FB •* • • STD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD • FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X ET CG PE STD BASE OPEN BASKET with BEADED BACK 15” or 18” 341/2” • • • • • • BOBB15 9.4 BOBB18 11.0 Beaded back panel is hardwood veneer on furniture board core. Matching interior. Includes two Natural finish baskets to slide into stationary rails. Face frame has a profiled inside edge. If ordered with Heirlooming Technique, will not feature sand-through characteristics. To change the top rail valance, specify one of the following modifications: Arch (TVRAV), Furniture (TVRFV), or Straight Valance (TVRVV). Custom Modifications 24” AUTHL AUTHR CBO • STD FTK FTKAV FTKFV • • CCO CFNTO CFP CFRMO CND DRT • ID INVFRM MIP P STD • RD DRWTK EXB EXL EXR FB •* • • STD RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X ET PE CG STD Effective March 17, 2014 BASE WINE CUBBY, 24″ DEEP 6” • • • • • • 341/2” Cubic Feet BWC6 3.7 Vertical application only. Matching interior. Frameless drilled and doweled construction. See BSD6 (Base Spice Cabinets with Drawers). Hardwood veneer on 3/4″ furniture board core. Reduced Depth only available in 3″ increments down to 12″. Custom Modifications 51/8” Opening Height AUTHL AUTHR 41/2” Opening Width CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB FD FFDL FFDR FPEB STD FTK FTKAV FTKFV ID INVFRM MIP P RD RECTKALL RECTKL RECTKBK RECTKR RT SCPDRW TD TVRAV TVRFV TVRVV • 6” 55/8” 24” ET 55/8” 3/4” 3/4” standard profile shaker profile • CG PE 3.7 BSD6 BASE SPICE DRAWER, 24″ DEEP 341/2” 3/4X VTK Decorative Door Options Construction Upgrades APC 225 • • • • • • • • • • • See BWC6 (Base Wine Cubby without Drawers). Frameless drilled and doweled construction. Hardwood veneer on a 3/4″ furniture board core. Vertical application only. Matching interior. Includes five 1/2″ hardwood drawers with rabbet joint, 21 13/16″ deep. Features flush end panels which cannot be skinned. If ordered with Heirlooming Technique, will not feature sand-through characteristics. Reduced Depth only available in 3″ increments down to 12″. Drawer front is unique to item and will not match profile chosen. All styles use standard drawer front profile except Anden, Benson, Breman, Caldera, Cartright, LaGrange, Leeton, Liberty, Montgomery, Sumner and Trystan, which use the shaker profile. • Buchanon PureStyle™ drawer fronts will be painted hardwood and do not feature glaze detail. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK EXB EXL EXR FB FD FFDL FFDR TVRAV TVRFV TVRVV VTK FPEB STD FTK FTKAV FTKFV ID INVFRM MIP P RD RECTKALL RECTKL RECTKBK RECTKR • 3/4X ET SCPDRW TD • Decorative Door Options Construction Upgrades APC RT PE CG Effective March 17, 2014 BASE CABINETS 24” Model FLOATING ISLAND BASE 24”, 30”, or 36” • • • • • • • • 36” 24” 226 32″ high without top and casters. Model Cubic Feet FIC24 15.0 FIC30 18.5 FIC36 21.9 1 full width drawer, 1 roll tray, and 1 adjustable 15″ shelf. 1 1/2″ thick solid Maple top. Top is treated with FDA approved mineral oil. Top overhangs 1″ on all sides. 4 heavy duty locking casters. Cabinet sides and back are finished to match cabinet doors. Wood cabinet styles are veneer construction only. Cabinet has butt doors, no center stile. Wood tops require regular applications of mineral oil by consumers. Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT • • • • • • • • BASE CABINETS FTK FTKAV FTKFV ID INVFRM MIP P RD DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB RT EXL EXR FFDL FFDR FB FD STD • TD TVRAV TVRFV TVRVV VTK FD FFDL FFDR SCPDRW FPEB • • Decorative Door Options Construction Upgrades BASE PANTRY PULL-OUT Interior Widths 4” or 7” 9” or 12” APC 3/4X STD • ET CG PE • BPP9 6.1 BPP12 7.8 • All styles feature a natural finish Smart Stop wood pull-out with adjustable shelves and chrome rail sides. • Addison BPP9 door panels feature a unique raised profile due to the narrow panel width. Custom Modifications 341/2” 24” Pull-out Interior Depth 211/4” AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV ID CFNTO CFP CFRMO CND DRT DRWTK • INVFRM • MIP P • • RD RECTKALL RECTKL RECTKBK RECTKR •* • EXB EXL EXR FB • • • RT SCPDRW TD FPEB • TVRAV TVRFV TVRVV VTK • *Not available on 9″ wide Decorative Door Options Construction Upgrades APC 3/4X • • ET PE CG • Effective March 17, 2014 BASE BOX COLUMN PULL-OUT 3” or 6” Interior Widths 13/4” or 43/4” 30” 23” Pull-out Interior Depth 203/4” Top View Model Cubic Feet BBCPO3 (Plain) 1.3 BBCPO6 (Plain) 2.5 BBCPO3OL (Overlay) 1.3 BBCPO6OL (Overlay) 2.5 BBCPO3FF (Fluted) 1.3 BBCPO6FF (Fluted) 2.5 227 3” or 6” Interior Widths 13/4” or 43/4” 30” 23” Top View Pull-out Interior Depth 203/4” OVERLAY 3” or 6” Interior Widths 13/4” or 43/4” 30” 23” Top View Pull-out Interior Depth 203/4” • Recommended to be installed between two cabinets. Can be installed on the end of a run with the use of an end panel (recommend BEPWD and BEPLAM). • Can also be installed between a cabinet and a wall or between a cabinet and an end panel. • Filler is included but unattached. • Install unit before removing shipping brace and attaching filler. • Overlay application includes profiled full overlay filler. • Decorative hardware required on base units. • Modifications not available. • Toekick not included; must be built up in the field. • If installed next to an appliance an End Panel must be installed onto the pull-out adjacent to the appliance. • All styles feature a natural finish Smart Stop wood pull-out with adjustable shelves and chrome rail sides. • BBCPO3 and BBCPO6 will not feature sand-through characteristics if ordered with Heirlooming Technique. • Distressing not available on BBCPO3FF and BBCPO6FF. • In order to allow proper clearance for opening and closing, allow an additional 1/8″ space between adjacent cabinet face frames. The 3″ wide pull-outs require 3 1/8″ space and the 6″ wide pull-outs require 6 1/8″ space. Spacers are included with the pull-outs to allow for proper installation. • Cannot be installed between cabinets with furniture ends (either specified with FPEB or on opposite end panel of cabinets with AUTHL/AUTHR) or with flush ends standard. When installed next to a deeper cabinet, make sure sufficient clearance is allowed for pull-out. • For full access from both sides of unit, do not install against a wall or next to deeper appliances and cabinets. FLUTED MODIFICATIONS No modifications available for these products. 24” 30” 2.4 BMC24 L or R BASE MESSAGE CENTER • • • • • • Includes magazine holder, bulletin board, and mail holder. Not available next to a peninsula cabinet. Door will open 90 degrees without decorative hardware. Cabinet should be hinged on wall side. For proper installation, adjacent cabinet must have FPEB or 1/4″ skin applied. Embellishments or overlay fillers can be used on side of cabinet to add a decorative touch. Custom Modifications AUTHL AUTHR 3” FTK CBO CCO • • FTKAV FTKFV ID CFNTO INVFRM CFP MIP CFRMO P CND RD DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB RT EXL EXR SCPDRW FB FD FFDL FFDR TD TVRAV TVRFV TVRVV VTK FPEB • Decorative Door Options Construction Upgrades APC 3/4X ET PE CG Effective March 17, 2014 BASE CABINETS PLAIN BASE OVEN CABINET 11/2” 191/2” 341/2” 9” 3” 24”, 27”, or 30” 24” 3” 228 Model BO30 BO33 BO36 • • • • Model Cubic Feet BO30 17.7 BO33 19.6 BO36 21.1 Oven cabinet has laminated interior. May not hold cooktop and slide-in oven combination. Refer to cooktop and slide-in oven manufacturer specifications. If ordered with Heirlooming Technique, will not feature sand-through characteristics. For built-in appliance support, OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details), but will not be included when depth is modified. Custom Modifications AUTHL AUTHR Opening Maximum Opening Maximum Width Width Height Height 24″ 28 1/4″ 19 1/2″ 27 1/2″ 27″ 31 1/4″ 19 1/2″ 27 1/2″ 30″ 34 1/4″ 19 1/2″ 27 1/2″ CBO CCO CFNTO CFP • FTKAV FTKFV ID • • • INVFRM MIP BASE CABINETS 3/4X ET • 27” 1 1 /2 ” 461/2” 24” RD • DRT DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD • CG 101/2” AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND DRT DRWTK • FTK FTKAV FTKFV ID • • • INVFRM MIP APC 3/4X ET • 137/8” Opening Height P • EXB EXL EXR FB • • STD RD • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades 21” or 27” Opening Width VTK • 24” 341/2” • TVRAV TVRFV TVRVV 19.3 Custom Modifications 24” or 30” FPEB Be sure to install any heat shield that comes with the appliance. Hardwood veneer on plywood with laminate interior. Reinforced plywood floor. Maximum cut-out width is 25 1/4″. If ordered with Heirlooming Technique, will not feature sand-through characteristics. 341/2” BASE BUILT-IN MICROWAVE CABINET with DRAWER FFDL FFDR • • NEW FD Decorative Door Options PE BDW2748 • • • • • P • Construction Upgrades BASE DISHWASHER CABINET, 46 1/2″ HIGH CND • FTK APC CFRMO CG PE STD BBMWD24 14.1 BBMWD30 17.4 • Standard laminate interior. • For built-in appliance support, OCINSTALLKIT is included in 24″ deep cabinets (see page 407 for details), but will not be included when depth is modified. • The usable cabinet face height between top of drawer front and top of cabinet is 19 1/8″ for partial overlay and 19 3/4″ for full overlay. Be sure to verify overall appliance height, gap requirements, and cut-out dimensions with cabinet specifications. Custom Modifications 24” Opening Maximum Opening Maximum Model Width Width Height Height BBMWD24 21″ 22 3/4″ 13 7/8″ 16 7/8″ BBMWD30 27″ 28 3/4″ 13 7/8″ 16 7/8″ AUTHL AUTHR CBO CCO • • • FTK FTKAV FTKFV • • ID CFNTO 3/4X INVFRM • • MIP • ET CFRMO CND DRT • P RD • DRWTK EXB EXL EXR FB • • • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD TVRAV TVRFV TVRVV FFDL FFDR FPEB • • VTK • Decorative Door Options Construction Upgrades APC CFP PE CG • Effective March 17, 2014 Model BASE MICROWAVE CABINET with DRAWER 24” or 27” 341/2” 21” or 24” Opening Width 16” Opening Height Cubic Feet BMWD2434 14.4 BMWD2734 16.1 BMWD3034 17.7 • Hardwood veneer on plywood with matching veneer interior. • Finished interior standard. Opening size: 24″= 21″ x 16″ 27″= 24″ x 16″ 30″= 27″ x 17″, Maximum cut-out= 28 1/4″ x 20″ • Reinforced plywood floor. Custom Modifications 30” 41 /2” ab (trimm le 3”) AUTHL AUTHR CBO CCO • • • 17” Opening Height 341/2” 27” Opening Width 21/2” 24” FTK FTKAV FTKFV • • ID CFNTO 3/4X INVFRM 24” 21” Opening Width 461/2” 16” Opening Height CND MIP P RD STD DRT • DRWTK EXB EXL EXR FB • • • STD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • CG PE STD BMW2448 L or R 17.6 BMW2448 17.6 BMW2748 19.3 BMW3048 22.3 • Hardwood veneer on plywood with matching veneer interior. • Finished interior standard. Opening size: 24″= 21″ x 16″ 27″= 24″ x 16″ 30″= 27″ x 18 1/2″, Maximum cut-out= 28 1/4″ x 21 1/2″ • Reinforced plywood floor. 24” Custom Modifications 24” or 27” 21” or 24” Opening Width 461/2” 16” Opening Height 24” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV ID • • • INVFRM 30” 3/4X ET CFP CFRMO CND DRT • MIP P RD STD • DRWTK EXB EXL EXR FB • • • STD RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • Decorative Door Options Construction Upgrades APC PE CG STD • le 3”) rimmab 41 /2” (t 27” Opening Width 461/2” 229 Decorative Door Options ET • BASE MICROWAVE CABINET, SINGLE or DOUBLE DOOR, 46 1/2″ HIGH CFRMO • Construction Upgrades APC CFP BASE CABINETS 24” 181/2” Opening Height 21/2” 24” Effective March 17, 2014 Model BASE MICROWAVE CABINET with ROLL TRAY, 46 1/2″ HIGH 24” 21” Opening Width 461/2” 16” Opening Height 17.6 BMW2448RT 17.6 BMW2748RT 19.3 BMW3048RT 22.3 Custom Modifications 24” or 27” 21” or 24” Opening Width 461/2” BASE CABINETS BMW2448RT L or R • Hardwood veneer on plywood with matching veneer interior. • Finished interior standard. Opening size: 24″= 21″ x 16″ 27″= 24″ x 16″ 30″= 27″ x 18 1/2″, Maximum cut-out= 28 1/4″ x 21 1/2″ • Reinforced plywood floor. 24” 230 Cubic Feet 16” Opening Height 24” AUTHL AUTHR CBO CCO CFNTO • • • • FTK FTKAV FTKFV • • ID INVFRM CFP 30” 3/4X CND • MIP P RD STD ET • DRT DRWTK EXB EXL EXR FB • • • • STD RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV • VTK • Decorative Door Options Construction Upgrades APC CFRMO PE CG STD • ) able 3” rimm 41 /2” (t 27” Opening Width 461/2” 181/2” Opening Height 21/2” 24” BASE CORNER PENINSULA F330 27” F330 241/4” • • • • • • BCP24 L or R 16.2 BCP24 14.4 Cabinet width is 24″. Adjustable full depth shelf. Includes two 3″ fillers, shipped unattached. Fillers are required for drawer and door opening clearance of adjacent cabinets. Unfinished toekick on front (B24) and back (BCP) of cabinet. Will not accept roll trays. Peninsula base cabinets are 1/4″ deeper to allow back paneling application on adjacent cabinets in a run with standard 24″ deep cabinets. Custom Modifications BCP24 L or R BCP24 AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • • • • • FTK FTKAV FTKFV • • ID INVFRM MIP P RD • STD • DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR STD* • EXB EXL EXR FB • • • RT SCPDRW TD FD FFDL FFDR FPEB • TVRAV TVRFV TVRVV VTK • *RECTKALL not available Decorative Door Options Construction Upgrades APC 3/4X • • ET PE CG • • Effective March 17, 2014 2014 . shipped unattached. If ordered with Heirlooming Technique. Decorative Door Options Construction Upgrades APC 3/4X ET PE CG • Effective March 17. 125/8” 6” Radius MODIFICATIONS No modifications available for these products.4 Cabinet width is 24″. Unfinished toekick on front (B24) and back (BCP) of cabinet.2 BCP24FH 14. Peninsula base cabinets are 1/4″ deeper to allow back paneling application on adjacent cabinets in a run with standard 24″ deep cabinets. Includes two 3″ fillers. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • • F330 BCP24FH 27” FTK FTKAV FTKFV • • ID INVFRM CFP CFRMO CND • • MIP P RD • STD • DRT DRWTK RECTKALL RECTKL RECTKBK RECTKR STD* EXB EXL EXR FB • • • RT • SCPDRW TD FD FFDL FFDR 231 FPEB • TVRAV TVRFV TVRVV VTK • F330 3/4X ET • BASE END SHELF 9” 9” 9” 9” 9” 9” BQRES • • • • • • • • BHRES 227/16” 231/4” 12” 11” Radius BQRES: 12″ wide x 23 1/4″ deep x 11″ radius. Angled pedestal design allows easier application of matching toeboard. Separate pedestal base included. Matching interior. Fillers are required for drawer and door opening clearance of adjacent cabinets. Hardwood veneer on a 3/4″ furniture board core.8 Reversible. Adjustable full depth shelf. Cabinet is to be installed behind the face frame of the adjacent 24″ deep base cabinet. BHRES: 12 5/8″ wide x 22 7/16″ deep x 6″ radius. Decorative Door Options Construction Upgrades APC BASE CABINETS *RECTKALL not available 241/4” PE CG • • BQRES 7.8 BHRES 7. Veneer construction finished to match cabinet face frame. Will not accept roll trays. will not feature sand-through characteristics.Model BASE CORNER PENINSULA with FULL HEIGHT DOOR F330 27” BCP24 L or R F330 241/4” • • • • • • Cubic Feet BCP24FH L or R 16. 0 BOCB24 14. Furniture (TVRFV). Furniture (TVRFV).3 BOCB30 17. If ordered with Heirlooming Technique. 30”. To change the top rail valance. or Straight Valance (TVRVV).0 BOCP24 14. or 36” 341/2” 24” 232 • • • • • Model Cubic Feet BOCP15 9.6 BOCB36 20.3 BOCP30 17. 30”. If ordered with Heirlooming Technique. Face frame has a profiled inside edge.BASE OPEN CABINET with PLAIN BACK 15”.9 Matching interior.4 BOCB18 11. will not feature sand-through characteristics. Beaded back panel is hardwood veneer on furniture board core.9 Matching interior. 18”. Custom Modifications AUTHL AUTHR CBO • STD CCO CFNTO CFP CFRMO CND DRT • FTK FTKAV FTKFV ID • • • INVFRM MIP P RD STD • • DRWTK EXB EXL EXR FB FD •* • • STD STD TD TVRAV TVRFV TVRVV VTK • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW FFDL FFDR FPEB • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X ET PE CG STD Effective March 17. Hardwood veneer plywood finished to match cabinet face frame.6 BOCP36 20. or Straight Valance (TVRVV). BASE CABINETS Custom Modifications AUTHL AUTHR CBO • STD CCO CFNTO CFP CFRMO CND DRT • FTK FTKAV FTKFV ID • • • INVFRM MIP P RD STD • • DRWTK EXB EXL EXR FB FD •* • • STD STD TD TVRAV TVRFV TVRVV VTK • • RECTKALL RECTKL RECTKBK RECTKR • RT SCPDRW • FFDL FFDR FPEB • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X ET CG PE STD BASE OPEN CABINET with BEADED BACK 15”. will not feature sand-through characteristics. or 36” 341/2” 24” • • • • • • BOCB15 9. specify one of the following modifications: Arch (TVRAV). 18”. 24”. To change the top rail valance. Face frame has a profiled inside edge. 2014 . specify one of the following modifications: Arch (TVRAV). 24”. Hardwood veneer plywood finished to match cabinet face frame.4 BOCP18 11. Custom Modifications AUTHL AUTHR CBO • STD CCO CFNTO CFP CFRMO CND DRT • FTK FTKAV FTKFV ID • • • INVFRM MIP P RD STD • • DRWTK EXB EXL EXR FB FD •* • • STD STD TD TVRAV TVRFV TVRVV VTK • • RECTKALL RECTKL RECTKBK RECTKR • • RT SCPDRW • FFDL FFDR FPEB • *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X ET PE 233 CG • Effective March 17. Hardwood veneer plywood finished to match cabinet face frame.6 BODB36 20.3 BODB30 17.9 Matching interior. 30”.4 BODB18 11. or Straight Valance (TVRVV).3 BODP30 17.6 BODP36 20. 30”.4 BODP18 11. 24”. Custom Modifications CBO • STD CCO CFNTO CFP CFRMO CND DRT • FTK FTKAV FTKFV ID • • • INVFRM MIP P RD STD • • DRWTK EXB EXL EXR FB FD •* • • STD STD TD TVRAV TVRFV TVRVV VTK • • RECTKALL RECTKL RECTKBK RECTKR • RT • SCPDRW • FFDL FFDR FPEB • BASE CABINETS AUTHL AUTHR *Not available on 15″ wide Decorative Door Options Construction Upgrades APC 3/4X ET CG PE • BASE OPEN CABINET with BEADED BACK and DRAWER 15”. If ordered with Heirlooming Technique. To change the top rail valance. Hardwood veneer plywood finished to match cabinet face frame. or 36” 341/2” 24” • • • • • BODB15 9. 18”. To change the top rail valance.BASE OPEN CABINET with PLAIN BACK and DRAWER 15”. specify one of the following modifications: Arch (TVRAV). 2014 . 18”.0 BODB24 14. Furniture (TVRFV). Beaded back panel is hardwood veneer on furniture board core. Furniture (TVRFV). or 36” 341/2” 24” • • • • Model Cubic Feet BODP15 9. will not feature sand-through characteristics. 24”. will not feature sand-through characteristics. specify one of the following modifications: Arch (TVRAV). If ordered with Heirlooming Technique.9 Matching interior.0 BODP24 14. or Straight Valance (TVRVV). 2014 . B24UD Cabinet Type CUSTOM MODIFICATIONS 234 UNIVERSAL DESIGN CABINETS CONSTRUCTION UPGRADES Mod. Description CBO CCO CFNTO CFP CFRMO CND Cabinet Box Only Cabinet Case Only Cabinet Front Only Cabinet False Panel Cabinet Frame Only Cabinet with No Door.7 B21UD L or R 12. with Drawer Deep Roll Tray Extended Stiles . 15”.Right Finished Ends Full Depth Shelf Furniture Finished Plywood Ends Increased Depth Matching Interior Plywood Reduced Depth Installed Roll Tray Scooped Drawer Void Toekick APC 3/4X PE All Plywood Construction Dovetail Drawer Undermount Plywood Ends DRT EXB EXL Cabinet Width Model MODIFICATIONS GRID KEY • STD 5 Day Express Response Item Cubic Feet UNIVERSAL DESIGN BASE. Not available on B12UD.7 321/2” Available Standard on these cabinets • Adjustable 15″ deep shelf. Custom Modifications 18” 24” 8” 6” CBO CCO CFNTO CFP CFRMO CND DRT EXB EXL EXR • • • • • • • • FB FD FPEB ID MIP RD RT SCPDRW VTK • • • • • • • • Construction Upgrades APC 3/4X PE • • • Effective March 17. or 21” B18UD L or R 9. Description Mod.2 12”.Both Extended Stile .7 B15UD L or R 8. Description Mod. 18”. SINGLE DOOR B12UD L or R 6.Left EXR FB FD FPEB ID MIP RD RT SCPDRW VTK Extended Stile .UNIVERSAL DESIGN NOMENCLATURE All UD Cabinets are 32 1/2″ high unless otherwise noted. • Optional roll tray kit available for field installation. • Optional roll trays kit available for field installation.UNIVERSAL DESIGN BASE.7 UNIVERSAL DESIGN CABINETS Construction Upgrades • 1 roll tray standard.2 B30RTUD 15. 18”. 30”. DOUBLE DOOR 24”.2 B30UD 15. 2014 .8 • 1 roll tray standard.8 • Adjustable 15″ deep shelf. 321/2” Custom Modifications CBO 18” 8” 24” 6” CCO CFNTO CFP CFRMO CND DRT EXB EXL EXR • • • • • • • • • FB FD FPEB ID MIP RD RT SCPDRW VTK • • • • • • Construction Upgrades UNIVERSAL DESIGN SINK BASE 30” or 36” APC 3/4X PE • • • SB30UD 15. Custom Modifications 321/2” CBO 18” 24” 6” CCO CFP CFRMO CND • • • • • • • • • FB FD FPEB ID MIP RD RT SCPDRW VTK • • • • • 8” CFNTO • Construction Upgrades UNIVERSAL DESIGN BASE with ROLL TRAY. FP 321/2” Custom Modifications CBO 18” 24” 6” 8” CCO CFNTO CFP CFRMO CND • • • STD • • FB FD FPEB ID MIP RD • • • • • EXL EXR DRT EXB • • RT SCPDRW VTK • Construction Upgrades APC = False Panel • 3/4X PE • Effective March 17.8 B36UD 16. 30”. 321/2” Custom Modifications CBO 18” 24” 8” 6” CCO CFNTO CFP CFRMO CND DRT EXB EXL EXR • • • • • • • • FB FD FPEB ID MIP RD RT SCPDRW VTK • • • • • • • • DRT EXB EXL EXR 235 UNIVERSAL DESIGN BASE with ROLL TRAY. or 36” APC 3/4X PE • • • B24RTUD 14. or 21” APC 3/4X PE • • • B15RTUD L or R 8.8 • Mini Touch-Up Kit (MTUK) included.8 SB36UD 16. SINGLE DOOR 15”.8 B36RTUD 16. MTUK includes small touch-up marker and small fill stick. or 36” Model Cubic Feet B24UD 14. DOUBLE DOOR 24”.2 B18RTUD L or R 9.7 B21RTUD L or R 12. • Top of drawer is 2″ from top of cabinet to accommodate installation of a cook top. • Microwave opening is 24″ wide x 15″ high. or 24” PE • 3DB15UD 8.2 • 1 deep and 2 shallow drawers. Tilt-out trays are also available as an accessory for field installation.2 3DB18UD 9. Custom Modifications 18” 24” 6” 236 8” CBO CCO • • FB FD FPEB • CFNTO CFP CFRMO ID DRT EXB • • MIP RD RT SCPDRW VTK • • • • EXL EXR CND • Construction Upgrades APC 3/4X 36” 87/8” 36” 33 5 /8” 36” 24” 36” 12” 24” 8” 12” • 27. Mini Touch-Up Kit (MTUK) included. • Addison door panels feature a unique raised profile due to the narrow panel width. See page 408. Upper shelf is mounted to fixed shelf. MTUK includes small touch-up marker and small fill stick. • Integrated soft close hinge not included.8 SB36STUD 16. Lower shelf is mounted to floor. APC 3/4X • UNIVERSAL DESIGN THREE DRAWER BASE 15”. Custom Modifications 321/2” 24” PE SLS36UD L or R UNIVERSAL DESIGN SUPER LAZY SUSAN 18 3 /8 ” UNIVERSAL DESIGN CABINETS • CBO CCO • • FB FD • CFNTO CFP CFRMO CND DRT EXB EXL EXR FPEB ID MIP RD RT SCPDRW VTK • • • Construction Upgrades Due to fixed shelf mounting. • Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of SLS. Includes two tilt-out trays. 18”.7 24” 6” • SLS36UD L or R wall width is 36″ x 36″. Custom Modifications 321/2” CBO 18” 24” 8” CCO • • FB FD • 6” CFNTO CFP • • FPEB ID • CFRMO EXL EXR CND DRT EXB • • MIP RD RT SCPDRW VTK • • • • EXL EXR Construction Upgrades UNIVERSAL DESIGN BASE MICROWAVE 27” APC 3/4X PE • • • 15. • Features two plywood revolving shelves with a 1″ plywood lip.Model UNIVERSAL DESIGN SINK BASE with TILT DOWNS 30” or 36” • • • • 321/2” Cubic Feet SB30STUD 15. 2014 . Custom Modifications 24” Opening Width 321/2” 18” 24” 6” 8” 15” Opening Height CBO CCO CFNTO • • • FB FD FPEB • STD • CFP CFRMO CND DRT EXB ID • • MIP RD RT SCPDRW VTK STD • • • Construction Upgrades APC 3/4X PE • Effective March 17.8 Tilt-out trays are stain resistant. moisture resistant plastic to allow storage of sponges and other cleaning materials. shelves cannot be retrofitted.7 3DB24UD 14. Fixed shelf is 3/4″ thick laminated furniture board.7 BMW27UD • 1 shallow drawer below microwave. 2014 . 84″ TALL.8 OC308424UD UNIVERSAL DESIGN SINGLE OVEN CABINET. 24″ DEEP 18” 24” Cubic Feet • If ordered with Heirlooming Technique. Cabinet has 3″ stiles on frame. 3/4” 3 /4 ” BF3UD 76” 76” BF6UD 3” MODIFICATIONS No modifications available for these products. All top and bottom cross rails are 1 1/2″ wide. • If ordered with Heirlooming Technique. Oven install kit will not be included when depth is modified. will not feature sand-through characteristics. 9” Effective March 17. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Two full depth adjustable shelves are included. CBO 24” 84” • • • • • • Custom Modifications 9” 3” Stile 41. will not feature sand-through characteristics. For built-in appliance support. 24” 4 3 /4 ” 321/2” Grain MODIFICATIONS No modifications available for these products. • All panels are finished two sides and front edge. Be sure to confirm a heat shield is built into your appliance.Model 30” 3” Stile 27” Frame Opening Height Max Cutout 281/4” x 441/2” (Shaded) 231/2” 9” OC308424UD UNIVERSAL DESIGN FILLER 3″ and 6″ Wide Fillers 6” 3” 6” 3” 241/2” 241/2” CFNTO CFP CFRMO CND • • • • FB FD FPEB ID MIP RD • • • • • • EXL EXR DRT EXB • • RT SCPDRW VTK 237 • APC 3/4X PE • • • BF3UD – TF384UD – FR3UD – BF6UD – TF684UD – FR6UD – UNIVERSAL DESIGN CABINETS 6” CCO Construction Upgrades 41/2” Toekick 8” 8” Full overlay styles feature face mount hinges. but packaged separately. 6” 8” 3 /8 ” FR3UD 6” 8” 3 /4 ” 3 /4 ” TF384UD 6” TF684UD 3 /8 ” FR6UD UNIVERSAL DESIGN VANITY DESK LEG VDLUDWD – • 3/4″ thick veneered plywood. if ordered with Heirlooming Technique. will not feature sand-through characteristics. TB8UDLAM18 is 1/8″ laminated hardboard. one 8′ section. one 8′ section. Effective March 17. TB8UDLAM12 is 1/2″ laminated hardboard. Laminate panels available only in White. one 8′ section. On TB8UDWD14. 2014 . Distressing not available.Model UNIVERSAL DESIGN TOEBOARD Grain Grain 715/16” 1 /4 ” TB8UDWD14 238 715/16” 1 /8 ” TB8UDLAM18 Grain Cubic Feet TB8UDWD14 – TB8UDLAM18 – TB8UDLAM12 – 715/16” 1 /2 ” TB8UDLAM12 • • • • • TB8UDWD14 is 1/4″ plywood finished veneer. MODIFICATIONS UNIVERSAL DESIGN CABINETS No modifications available for these products. Description Mod.7 U248412 L or R 18. • Four full depth adjustable shelves are included but packaged separately. . 84″.Left Recessed Toekick . • Depth can be reduced to a minimum of 6″. 15”. • Tall non-mitered doors will have two center panels with cross rail.9 U248412 18.3 U248712 18.Right Furniture Finished Plywood Ends Flush Toekick Flush Toekick Arch Flush Toekick Furniture ID MIP RD RECTKALL RECTKBK RECTKL RECTKR RT TD TKP VTK Increased Depth Matching Interior Plywood Reduced Depth Recessed Island Toekick Recessed Toekick .8 U158712 L or R 12. Description Mod.Both EXL EXR FB FFDL Extended Stile .8 U338712 25.3 U248712 L or R 18.Right Finished Ends Face Frame and Door on End .9 U368712 27. 27”. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. 2014 TALL CABINETS Cabinet Type { { All Wall Cabinets are 12″ deep unless otherwise noted. cabinet will not include toekick/pedestal. 12”. 30”.Left Face Frame and Door on End .3 U188412 L or R 14.4 U278712 21.8 U128412 L or R 9.TOP Cut for Glass Doors Model Cubic Feet 239 Model Cubic Feet UTILITY.Back Recessed Toekick .1 U218712 L or R 16.4 U338412 24.0 U188712 L or R 14.Left Extended Stile . 12” Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • •* CCO CFNTO CFRMO • ID CND DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB FFDL FFDR • • • • RT TD TKP VTK • • • • *Not available on 9″ and 12″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. with Drawer Deep Roll Tray Toekick Drawer Extended Stiles . 12″ DEEP U98412 L or R 7. 93″.TOP • • Effective March 17.MODIFICATIONS GRID KEY WALL CABINET NOMENCLATURE • STD { { Cabinet Width Cabinet Depth Cabinet Height CONSTRUCTION UPGRADES CUSTOM MODIFICATIONS Mod. cabinet will not include toekick/pedestal.5 U218412 L or R 16. or 96″ TALL. 90″. Description AUTHL AUTHR CBO CCO CFNTO CFRMO CND Authentic End . • Addison U98712 door panels feature a unique raised profile due to the narrow panel width. 87″.7 U128712 L or R 10.6 U308712 23.0 9”. or 24” U158412 L or R 11. • Depth can be reduced to a minimum of 6″.Right Cabinet Box Only Cabinet Case Only Cabinet Front Only Cabinet Frame Only Cabinet with No Door. For depths of 6″-8″. For depths of 6″-8″.Left Authentic End . Description Mod. 21”.5 U98712 L or R 7. or 36” 15” or 18” Frame Opening Height 84” or 87” 581/2” Frame Opening Height U248412 U278412 U308412 U338412 U368412 U248712 U278712 U308712 U338712 U368712 • Four full depth adjustable shelves are included but packaged separately.2 U308412 22.8 15” or 18” Frame Opening Height 84” or 87” 581/2” Frame Opening Height 12” U98412 L or R U128412 L or R U158412 L or R U188412 L or R U218412 L or R U248412 L or R U98712 L or R U128712 L or R U158712 L or R U188712 L or R U218712 L or R U248712 L or R 24”.6 U368412 26. 33”. Description APC 3/4X ET PE All Plywood Construction Dovetail Drawer Undermount EasyTrax™ Plywood Ends CG. • Tall non-mitered doors will have two center panels with cross rail.9 U278412 20.Right Installed Roll Tray Tray Dividers Loose Toekick Void Toekick DRT DRWTK EXB FFDR FPEB FTK FTKAV FTKFV Available Standard on these cabinets Logix Organization Cabinet DECORATIVE DOOR OPTIONS Mod. • Addison U98412 door panels feature a unique raised profile due to the narrow panel width. 18”. 84″.6 U279012 21. Depth can be reduced to a minimum of 6″. Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • •* CCO CFNTO CFRMO • ID CND DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB FFDL FFDR • • • • RT TD TKP VTK • • • • TALL CABINETS *Not available on 9″ and 12″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG.3 U249012 L or R 19.6 U249012 19. 15”. Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. Addison U99012 door panels feature a unique raised profile due to the narrow panel width. 30”. or 96″ TALL.8 Five full depth adjustable shelves are included but packaged separately. 90″. 21”. or 36” 201/2” Frame Opening Height 90” 581/2” Frame Opening Height 12” U249012 U279012 U309012 U339012 U369012 • • • • • Cubic Feet U99012 L or R 8. 18”.7 U189012 L or R 15. For depths of 6″-8″.Model UTILITY. 93″. cabinet will not include toekick/pedestal.9 U309012 24.TOP • • Effective March 17. 87″.4 U159012 L or R 12.0 U219012 L or R 17. or 24” 201/2” Frame Opening Height 90” 581/2” Frame Opening Height 240 U99012 L or R U129012 L or R U159012 L or R U189012 L or R U219012 L or R U249012 L or R 12” 24”. Tall non-mitered doors will have two center panels with cross rail. 2014 . 27”. 12″ DEEP (cont’d) 9”.2 U339012 26. 12”. 33”.1 U129012 L or R 10.5 U369012 28. 4 U339612 28. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. 21”. 12”. 90″.6 U129312 L or R 10. or 24” 27” Frame Opening Height 96” 581/2” Frame Opening Height Cubic Feet Model Cubic Feet U99312 L or R 8.3 U309312 25. 30”.9 U249312 20. Pedestal must be covered with toeboard material. 12″ DEEP (cont’d) 9”. 33”.0 U309612 25.2 U369312 29. 21”. 18”. • Six full depth adjustable shelves are included but packaged separately.7 • Separate pedestal base included but shipped separately on 93″ tall.3 U99612 L or R 8. 12”. 2014 TALL CABINETS Model . or can be centered. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. or 36” 27” Frame Opening Height 96” 581/2” Frame Opening Height 241 U249612 U279612 U309612 U339612 U369612 12” Effective March 17.4 U249312 L or R 20. or 24” 24” Frame Opening Height 93” 581/2” Frame Opening Height U99312 L or R U129312 L or R U159312 L or R U189312 L or R U219312 L or R U249312 L or R 12” 24”. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet.0 U219312 L or R 17. 27”. 15”. • Depth can be reduced to a minimum of 6″. cabinet will not include toekick/pedestal. cabinet will not include toekick/pedestal.2 U249612 20. For depths of 6″-8″.0 U159312 L or R 13.TOP • • 24”.8 U219612 L or R 18. • Separate pedestal base included but shipped separately on 96″ tall.8 U339312 27.7 U129612 L or R 11.1 U159612 L or R 13. 18”. • Depth can be reduced to a minimum of 6″. or 36” 24” Frame Opening Height 93” 581/2” Frame Opening Height U249312 U279312 U309312 U339312 U369312 12” 9”.UTILITY. For depths of 6″-8″. or can be centered. • Tall non-mitered doors will have two center panels with cross rail. 15”. • Five full depth adjustable shelves are included but packaged separately. 27”. 33”.6 U279612 23. Custom Modifications U99612 L or R U129612 L or R U159612 L or R U189612 L or R U219612 L or R U249612 L or R AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • ID • 12” • 3/4X ET DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB FFDL FFDR • • • • RT TD TKP VTK • • Decorative Door Options Construction Upgrades APC CND PE CG.5 U189612 L or R 16. Pedestal must be covered with toeboard material. 93″. 84″. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet.2 U249612 L or R 20. • Tall non-mitered doors will have two center panels with cross rail.9 U279312 22. • Addison U99312 door panels feature a unique raised profile due to the narrow panel width. 87″.5 U189312 L or R 15. 30”. • Addison U99612 door panels feature a unique raised profile due to the narrow panel width.7 U369612 30. or 96″ TALL. 12”.7 U308424 41. • Addison U98724 door panels feature a unique raised profile due to the narrow panel width. • Addison U98424 door panels feature a unique raised profile due to the narrow panel width.3 9”. PE CG.7 U128724 L or R 18.4 U188424 L or R 25.6 U158724 L or R 22. 18”. • Depth can be reduced to a minimum of 6″. • Tall non-mitered doors will have two center panels with cross rail. • Depth can be reduced to a minimum of 6″. cabinet will not include toekick/pedestal. For depths of 6″-8″. 33”. • Tall non-mitered doors will have two center panels with cross rail. For depths of 6″-8″. 27”. 87″. and 15″ wide APC CND • Four full depth adjustable shelves are included but packaged separately.5 U98424 L or R U128424 L or R U158424 L or R U188424 L or R U218424 L or R U248424 L or R U218424 L or R 29.3 U308724 42.Model Model Cubic Feet UTILITY. or 24” U158424 L or R 21.8 U338424 45. 24″ DEEP U98424 L or R 13. or 36” 15” or 18” Frame Opening Height 84” or 87” 24” TALL CABINETS Cubic Feet U248424 U278424 U308424 U338424 U368424 • Four full depth adjustable shelves are included but packaged separately.6 U98724 L or R U128724 L or R U158724 L or R U188724 L or R U218724 L or R U248724 L or R U278424 37.4 U248724 L or R 34. 21”.4 U248724 34.4 U278724 38.3 U128424 L or R 17. 2014 . 84″.9 15” or 18” Frame Opening Height 84” or 87” 581/2” Frame Opening Height 242 24” 24”. 15”. or 96″ TALL.2 U338724 46.5 U218724 L or R 30.6 U188724 L or R 26.6 U248424 33. cabinet will not include toekick/pedestal. 12″.5 U248424 L or R 33. 93″. 30”. U308724 U338724 U368724 Custom Modifications 581/2” Frame Opening U248724 Height U278724 AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • •+ • • • CCO CFNTO CFRMO • • ET DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • RT TD TKP VTK •▲ • • • RECTKALL RECTKL RECTKBK RECTKR • + Not available on 9″ and 12″ wide ▲ Not available on 9″ wide Decorative Door Options Construction Upgrades 3/4X DRT • *Not available on 9″.8 U98724 L or R 14.TOP • • Effective March 17.2 U368724 50.8 U368424 49. 90″. 24″ DEEP (cont’d) 9”. 87″. 33”. 12”. Addison U99024 door panels feature a unique raised profile due to the narrow panel width. 12″.TOP • • TALL CABINETS 90” Effective March 17. Tall non-mitered doors will have two center panels with cross rail. or 24” 201/2” Frame Opening Height 90” 581/2” Frame Opening Height U99024 L or R U129024 L or R U159024 L or R U189024 L or R U219024 L or R U249024 L or R 24” 24”.7 U129024 L or R 18. 15”.9 U159024 L or R 23. For depths of 6″-8″. 93″. Depth can be reduced to a minimum of 6″. 27”. 21”.4 U369024 52. or 96″ TALL. Custom Modifications U249024 U279024 581/2” U309024 Frame U339024 Opening U369024 Height 24” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • •+ • • • CCO CFNTO CFRMO • • ET DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • RT TD TKP VTK •▲ • • • RECTKALL RECTKL RECTKBK RECTKR • + Not available on 9″ and 12″ wide ▲ Not available on 9″ wide Decorative Door Options Construction Upgrades 3/4X DRT • *Not available on 9″. 2014 .0 U309024 44. cabinet will not include toekick/pedestal. and 15″ wide APC CND PE CG.6 243 Five full depth adjustable shelves are included but packaged separately. 90″.8 U249024 35.2 U189024 L or R 27.2 U339024 48.Model UTILITY. 18”.8 U279024 40. 84″. or 36” 201/2” Frame Opening Height • • • • Cubic Feet U99024 L or R 14.6 U249024 L or R 35.4 U219024 L or R 31. 30”. 90″. 87″.6 U309324 45. 30”. 21”. • Depth can be reduced to a minimum of 6″. or can be centered.2 U99624 L or R 15.7 U129324 L or R 19.7 U189324 L or R 28. cabinet will not include toekick/pedestal. • Separate pedestal base included but shipped separately on 96″ tall.3 U279624 42.1 U339324 50. 12”. For depths of 6″-8″. • Six full depth adjustable shelves are included but packaged separately. or 36” 24” Frame Opening Height 93” U249324 U279324 581/2” U309324 Frame U339324 Opening U369324 Height 24” Cubic Feet Model Cubic Feet U99324 L or R 15. 15”. • Tall non-mitered doors will have two center panels with cross rail.1 U279324 41. 93″.6 U129624 L or R 20. or 24” 27” Frame Opening Height AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • 96” 581/2” Frame Opening Height U99624 L or R U129624 L or R U159624 L or R U189624 L or R U219624 L or R U249624 L or R CFNTO CFRMO • CND DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR • EXB EXL EXR FB FFDL FFDR • • • • RT TD TKP VTK •* • *Not available on 9″ wide Decorative Door Options Construction Upgrades APC • 3/4X ET PE CG.6 U249324 L or R 37.6 U219624 L or R 33. or 96″ TALL.1 U249324 37. 2014 . 27”. 21”. Pedestal must be covered with toeboard material. 33”. • Five full depth adjustable shelves are included but packaged separately. 30”. 18”.1 • Separate pedestal base included but shipped separately on 93″ tall.TOP • • 24” 24”.Model UTILITY. 24″ DEEP (cont’d) 9”. 18”.2 U219324 L or R 32.0 U339624 51.3 U369624 56. Custom Modifications TALL CABINETS 9”. 15”.3 U189624 L or R 29. • Addison U99624 door panels feature a unique raised profile due to the narrow panel width. or can be centered.0 U249624 L or R 38. For depths of 6″-8″. or 36” 27” Frame Opening Height 96” 581/2” Frame Opening Height U249624 U279624 U309624 U339624 U369624 24” Effective March 17. 33”. • Addison U99324 door panels feature a unique raised profile due to the narrow panel width.7 U309624 47. • Depth can be reduced to a minimum of 6″. 84″.2 U159324 L or R 23. 27”. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. cabinet will not include toekick/pedestal. 12”. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.6 U369324 54. Pedestal must be covered with toeboard material. or 24” 24” Frame Opening Height 93” 581/2” Frame Opening Height 244 U99324 L or R U129324 L or R U159324 L or R U189324 L or R U219324 L or R U249324 L or R 24” 24”. • Tall non-mitered doors will have two center panels with cross rail.0 U249624 38.9 U159624 L or R 24. 93″. installed in cabinet. 24″ DEEP NEW 12”.8 U368424RT 49.9 NEW • Four roll trays are included. 21”.8 U279024RT 40. 24”. or 24” 15” or 18” Frame Opening Height 84” or 87” 581/2” Frame Opening Height U128424RT L or R U158424RT L or R U188424RT L or R U218424RT L or R U248424RT L or R U128724RT L or R U158724RT L or R U188724RT L or R U218724RT L or R U248724RT L or R 24” 15” or 18” Frame Opening U248424RT Height 581/2” Frame Opening Height U128424RT L or R 16. 15”. or 96″ TALL.6 U249024RT L or R 35. • Depth can be reduced to a minimum of 12″. 15”.2 U189024RT L or R 27. 90″. 33”. 27”. • Tall non-mitered doors will have two center panels with cross rail.8 U338424RT 45. • Depth can be reduced to a minimum of 12″.5 U218724RT L or R 30.4 U248724RT 34.TOP • • • U129024RT L or R 17. 90″.4 U219024RT L or R 31.6 U158724RT L or R 22. 18”.2 U158424RT L or R Model Cubic Feet U128724RT L or R 18.4 U278724RT 38. 93″. 30”.6 U188724RT L or R 26. Custom Modifications U278424RT U308424RT U338424RT U368424RT U248724RT U278724RT U308724RT U338724RT U368724RT AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO CFRMO • ID CND • MIP RD • • DRT DRWTK EXB EXL EXR FB • •* • • • RT TD TKP VTK • • • FFDL FFDR RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR *Not available on 12″ and 15″ wide 24” Decorative Door Options Construction Upgrades 3/4X • UTILITY with ROLL TRAYS.4 U369024RT 52. 2014 .6 • Four roll trays are included. • Tall non-mitered doors will have two center panels with cross rail.6 U248424RT 33. or 24” 201/2” Frame Opening Height 90” U129024RT L or R U159024RT L or R Frame Opening U189024RT L or R U219024RT L or R Height U249024RT L or R 581/2” PE CG.TOP • • • Effective March 17.3 U159024RT L or R 23. • Depth can be reduced to a minimum of 12″. 87″.4 U248724RT L or R 34. 33”.5 U248424RT L or R 33.7 U308424RT 41.9 21. 21”.0 U309024RT 44. 27”.8 U249024RT 35. installed in cabinet. or 96″ TALL.4 U188424RT L or R 25.2 U338724RT 46. installed in cabinet. 87″. 18”. or 36” Custom Modifications 201/2” Frame Opening Height 90” NEW ET U249024RT U279024RT 581/2” U309024RT Frame Opening U339024RT U369024RT Height AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO CFRMO • ID CND • MIP RD • • DRT DRWTK EXB EXL EXR FB • •* • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • *Not available on 12″ and 15″ wide Decorative Door Options Construction Upgrades APC 24” TALL CABINETS APC • 3/4X ET PE CG. or 36” 84” or 87” Cubic Feet 245 • Four roll trays are included. 30”. 84″.5 U218424RT L or R 29. 84″.3 U308724RT 42. • Tall non-mitered doors will have two center panels with cross rail.Model UTILITY with ROLL TRAYS. 24″ DEEP (cont’d) 12”.2 U368724RT 50. 24” 24”.6 U278424RT 37.2 U339024RT 48. 2 U219324RT L or R 32. 18”.7 U189324RT L or R 28.1 U249324RT 37. 93″. or can be centered. 90″. or can be centered.0 U249624RT L or R 38.2 U159324RT L or R Cubic Feet 18.6 U219624RT L or R 33. 27”.0 U249624RT 38. or 96″ TALL.3 U189624RT L or R 29.3 U279624RT 42. installed in cabinet.1 U279324RT 41.0 U339624RT 51. • Four roll trays are included. Pedestal must be covered with toeboard material. • Tall non-mitered doors will have two center panels with cross rail. or 36” 27” Frame Opening Height 96” 581/2” Frame Opening Height U249624RT U279624RT U309624RT U339624RT U369624RT 24” Effective March 17. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.6 U309324RT 45. 87″. 30”. • Tall non-mitered doors will have two center panels with cross rail.6 U249324RT L or R 37.5 23. • Separate pedestal base included but shipped separately on 96″ tall. 18”.3 U369624RT 56. installed in cabinet.7 U309624RT 47.6 U369324RT 54. 21”. • Depth can be reduced to a minimum of 12″. 21”. Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV CCO CFNTO CFRMO • ID • TALL CABINETS Model U129624RT L or R FPEB 24” Cubic Feet CND • DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP •* FFDL FFDR VTK • *Not available on 12″ wide 12”.9 U159624RT L or R 24. • Depth can be reduced to a minimum of 12″. 84″. or 24” 24” Frame Opening Height 93” 581/2” Frame Opening Height 246 U129324RT L or R U159324RT L or R U189324RT L or R U219324RT L or R U249324RT L or R 24” 24”.Model UTILITY with ROLL TRAYS. 15”.1 U339324RT 50. • Four roll trays are included. 24″ DEEP (cont’d) 12”.1 NEW • Separate pedestal base included but shipped separately on 93″ tall. Pedestal must be covered with toeboard material. 30”. 33”. 33”. 15”. or 24” 96” 581/2” Frame Opening Height Decorative Door Options Construction Upgrades 27” Frame Opening Height APC • 3/4X ET PE CG. 2014 . 27”.TOP • • • U129624RT L or R U159624RT L or R U189624RT L or R U219624RT L or R U249624RT L or R 24” 24”. or 36” 24” Frame Opening Height 93” U249324RT U279324RT 581/2” U309324RT Frame Opening U339324RT U369324RT Height NEW U129324RT L or R 19. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. 87″.2 UEAS188712 L or R 14. • Tall non-mitered doors will have two center panels with cross rail. • Depth can be reduced to a minimum of 10″.8 UEAS159012 L or R 12. • Four 6 1/2″ reduced depth adjustable shelves are included but packaged separately.9 UEAS308712 23. • Four chrome baskets featuring railsystem for adjustability on each lower door.0 UEAS158712 L or R 12. 2014 . or 96″ TALL. 12″ DEEP Cubic Feet UEAS309012 UEAS369012 12” Effective March 17.7 UEAS188412 L or R 14. 90″.8 UEAS308412 22.Model 15” or 18” 15” or 18” Frame Opening Height 84” or 87” 581/2” Frame Opening Height UEAS158412 L or R UEAS188412 L or R UEAS158712 L or R UEAS188712 L or R 12” 30” or 36” 15” or 18” Frame Opening Height 84” or 87” 581/2” Frame Opening Height 11. 84″.4 UEAS368712 27. Custom Modifications UEAS308712 UEAS368712 AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO CFRMO • ID APC 201/2” Frame Opening Height 90” 581/2” Frame Opening Height • 3/4X ET CND DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP VTK • • • • FFDL FFDR PE CG. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet.5 UEAS369012 28.3 UEAS309012 24.8 • Four chrome baskets featuring railsystem for adjustability on each lower door.6 UEAS368412 26. • Depth can be reduced to a minimum of 10″. 93″. • Four 6 1/2″ reduced depth adjustable shelves and one full depth adjustable shelf are included but packaged separately. • Tall non-mitered doors will have two center panels with cross rail.0 UEAS189012 L or R 15.TOP • • UEAS159012 L or R UEAS189012 L or R 12” 30” or 36” 201/2” Frame Opening Height 90” 581/2” Frame Opening Height 247 Decorative Door Options Construction Upgrades 15” or 18” Cubic Feet UEAS158412 L or R UEAS308412 UEAS368412 12” Model TALL CABINETS UTILITY EASY ACCESS. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. • Depth can be reduced to a minimum of 10″.5 UEAS189312 L or R 15.0 UEAS309612 25.0 UEAS309312 25.5 UEAS189612 L or R 16. • Tall non-mitered doors will have two center panels with cross rail. or 96″ TALL. • Four 6 1/2″ reduced depth adjustable shelves are included but packaged separately.1 UEAS159612 L or R 13.7 • Four chrome baskets featuring railsystem for adjustability on each lower door. Custom Modifications 93” 581/2” UEAS309312 Frame UEAS369312 Opening Height AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • ID • 12” APC TALL CABINETS • 3/4X ET DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • • • FFDL FFDR VTK Decorative Door Options Construction Upgrades 15” or 18” CND PE CG. 93″. • Four chrome baskets featuring railsystem for adjustability on each lower door. or can be centered. 87″.Model UTILITY EASY ACCESS. Pedestal must be covered with toeboard material. Pedestal must be covered with toeboard material. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. 12″ DEEP (cont’d) 15” or 18” 24” Frame Opening Height 93” 581/2” Frame Opening Height 248 UEAS159312 L or R UEAS189312 L or R 12” 30” or 36” 24” Frame Opening Height Cubic Feet Model Cubic Feet UEAS159312 L or R 13.7 UEAS369612 30. • Four 6 1/2″ reduced depth adjustable shelves and two full depth adjustable shelves are included but packaged separately.8 UEAS369312 29. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. 90″. • Tall non-mitered doors will have two center panels with cross rail. or can be centered. 2014 . 84″.TOP • • 27” Frame Opening Height 96” 581/2” Frame Opening Height UEAS159612 L or R UEAS189612 L or R 12” 30” or 36” 27” Frame Opening Height 96” UEAS309612 581/2” UEAS369612 Frame Opening Height 12” Effective March 17. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. • Separate pedestal base included but shipped separately on 96″ tall. • Depth can be reduced to a minimum of 10″. • Separate pedestal base included but shipped separately on 93″ tall. • Four chrome baskets featuring railsystem for adjustability on each lower door.4 UEAS158724 L or R 22.6 UEAS159024 L or R 23. 249 Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • CND DRT • DRWTK EXB EXL EXR FB •* • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR *Not available on 15″ wide 24” APC 15” or 18” • 3/4X ET PE CG.6 UEAS189024 L or R 27.9 • Four chrome baskets featuring railsystem for adjustability on each lower door. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet.6 UEAS308424 41. • Tall non-mitered doors will have two center panels with cross rail. 2014 .8 UEAS368724 50. 84″.Model UTILITY EASY ACCESS.4 UEAS309024 44. • Depth can be reduced to a minimum of 10″. • Tall non-mitered doors will have two center panels with cross rail. 90″. • Depth can be reduced to a minimum of 10″.5 UEAS369024 52. • Four 18 1/2″ reduced depth adjustable shelves are included but packaged separately. or 96″ TALL.3 UEAS368424 49. 93″.TOP • • TALL CABINETS Decorative Door Options Construction Upgrades 201/2” Frame Opening Height 90” UEAS159024 L or R 581/2” UEAS189024 L or R Frame Opening Height 24” 30” or 36” 201/2” Frame Opening Height 90” UEAS309024 581/2” Frame UEAS369024 Opening Height 24” Effective March 17.2 UEAS188724 L or R 26. 87″.2 UEAS308724 42. 24″ DEEP 15” or 18” 15” or 18” Frame Opening Height 84” or 87” UEAS158424 L or R UEAS188424 L or R 581/2” Frame Opening UEAS158724 L or R Height UEAS188724 L or R 24” 30” or 36” 15” or 18” Frame Opening Height 84” or 87” UEAS308424 UEAS368424 581/2” Frame Opening UEAS308724 UEAS368724 Height Cubic Feet Model Cubic Feet UEAS158424 L or R 21.2 UEAS188424 L or R 25. • Four 18 1/2″ reduced depth adjustable shelves and one full depth adjustable shelf are included but packaged separately. 9 UEAS159624 L or R 24. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. 90″.Model UTILITY EASY ACCESS. • Four 18 1/2″ reduced depth adjustable shelves and one full depth adjustable shelf are included but packaged separately. Custom Modifications 93” UEAS309324 581/2” UEAS369324 Frame Opening Height AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • CFNTO CFRMO • MIP RD • • • TALL CABINETS • 3/4X ET DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades APC DRT • ID 24” 15” or 18” CND PE CG. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.3 UEAS369624 56.1 • Four chrome baskets featuring railsystem for adjustability on each lower door. 87″. or can be centered. • Tall non-mitered doors will have two center panels with cross rail. 84″.7 UEAS309624 47. 2014 . • Four chrome baskets featuring railsystem for adjustability on each lower door.TOP • • 27” Frame Opening Height 96” UEAS159624 L or R 581/2” UEAS189624 L or R Frame Opening Height 24” 30” or 36” 27” Frame Opening Height 96” UEAS309624 581/2” UEAS369624 Frame Opening Height 24” Effective March 17. • Tall non-mitered doors will have two center panels with cross rail.7 UEAS189324 L or R 28. • Separate pedestal base included but shipped separately on 96″ tall.2 UEAS309324 45. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. Pedestal must be covered with toeboard material. • Four 18 1/2″ reduced depth adjustable shelves and two full depth adjustable shelves are included but packaged separately. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. Pedestal must be covered with toeboard material.3 UEAS189624 L or R 29. 93″. • Depth can be reduced to a minimum of 10″. or can be centered. • Depth can be reduced to a minimum of 10″. 24″ DEEP (cont’d) 15” or 18” 24” Frame Opening Height 93” UEAS159324 L or R 581/2” UEAS189324 L or R Frame Opening Height 250 24” 30” or 36” 24” Frame Opening Height Cubic Feet Model Cubic Feet UEAS159324 L or R 23. or 96″ TALL.1 UEAS369324 54. • Separate pedestal base included but shipped separately on 93″ tall. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. adjacent cabinet must have FPEB or 1/4″ skin applied.2 UOC24966 • Includes six adjustable shelves and broom clip packaged separately (not installed). • Does not include toeboard or pedestal. • Does not include toeboard or pedestal. • Includes five adjustable shelves and broom clip packaged separately (not installed). 6″ DEEP.Model UTILITY ORGANIZER CABINET. • For proper installation.TOP • Effective March 17. • For proper installation. • Tall non-mitered doors will have two center panels with cross rail. 87″. 33/32” 127/16” 24” 27” Frame Opening Height Custom Modifications 911/2” 581/2” Frame Opening Height UOC24966 AUTHL AUTHR FPEB CBO CCO CFNTO CFRMO • • • • FTK FTKAV FTKFV ID MIP STD 6” 13/64” 261/64” 33/32” 127/16” • CND RD DRWTK EXB EXL EXR FB FFDL FFDR RECTKALL RECTKL RECTKBK RECTKR RT TD TKP VTK DRT • Decorative Door Options Construction Upgrades APC 3/4X 251 TALL CABINETS 791/2” or 821/2” Cubic Feet ET PE CG. • Tall non-mitered doors will have two center panels with cross rail. or 96″ TALL. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. • 6″ overlay fillers can be used on the side to add a decorative touch (Full overlay door styles only).1 UOC24876 13/64” Model 12. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. adjacent cabinet must have FPEB or 1/4″ skin applied.5 UOC24906 • Includes five adjustable shelves and broom clip packaged separately (not installed). • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet.7 UOC24846 6” 33/32” 261/64” 127/16” 24” 201/2” Frame Opening Height for 851/2” 24” Frame Opening Height for 881/2” 851/2” or 881/2” 581/2” Frame Opening Height 13/64” 6” 261/64” UOC24906 UOC24936 Cubic Feet 11. 90″. • Tall non-mitered doors will have two center panels with cross rail. • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. • Designed to be installed onto an adjacent 24″ deep tall cabinet. 84″. 2014 . • Designed to be installed onto an adjacent 24″ deep tall cabinet.9 UOC24936 • Includes four adjustable shelves and broom clip packaged separately (not installed). • 6″ overlay fillers can be used on the side to add a decorative touch (Full overlay door styles only). adjacent cabinet must have FPEB or 1/4″ skin applied. 24″ WIDE 24” 15” or 18” Frame Opening Height 581/2” Frame Opening Height UOC24846 UOC24876 10. • For proper installation. • 6″ overlay fillers can be used on the side to add a decorative touch (Full overlay door styles only). 93″. 11. adjacent cabinet must have FPEB or 1/4″ skin applied. • For proper installation. • Tall non-mitered doors will have two center panels with cross rail. • Designed to be installed onto an adjacent 24″ deep tall cabinet. • For proper installation. • Designed to be installed onto an adjacent 24″ deep tall cabinet. • Designed to be installed onto an adjacent 24″ deep tall cabinet. • Does not include toeboard or pedestal. • Does not include toeboard or pedestal. • 6″ overlay fillers can be used on the side to add a decorative touch (Full overlay door styles only). • 6″ overlay fillers can be used on the side to add a decorative touch (Full overlay door styles only). • Includes four adjustable shelves and broom clip packaged separately (not installed). • Does not include toeboard or pedestal. 11. • Tall non-mitered doors will have two center panels with cross rail. adjacent cabinet must have FPEB or 1/4″ skin applied. Opposite end panel will feature FPEB construction (if decorative doors are desired on both sides of cabinet. and coat hooks. Specify AER model for installation on the left side of a tall cabinet. adjacent cabinet must have FPEB or 1/4″ skin applied. 24″ WIDE 24” 15” or 18” Frame Opening Height 252 791/2” or 821/2” 581/2” Frame Opening Height 24” 15” or 18” Frame Opening Height 581/2” Frame Opening Height 14. • Does not include toeboard or pedestal. • Designed to be installed onto an adjacent 24″ deep tall cabinet.5 Custom Modifications 9” TALL CABINETS UOCDZ24849AEL • Features magnetic whiteboards on back of lower doors.TOP PE • 24” 201/2” Frame Opening Height for 851/2” 24” Frame Opening Height for 881/2” 85”1/2 or 88”1/2 EXB STD RECTKALL RECTKL RECTKBK RECTKR • 24” DRWTK • Construction Upgrades APC DRT 581/2” Frame Opening Height 9” 27” Frame Opening Height 911/2” 581/2” Frame Opening Height 9” UOCDZ24909AEL UOCDZ24909AER 24” 27” Frame Opening Height 911/2” 581/2” Frame Opening Height 9” UOCDZ24969AEL UOCDZ24969AER UOCDZ24939AEL UOCDZ24939AER 31/2” 11/2” Pencil Holder 53/8” 11/8” Power Strip 2” 85/8” 3” Grommet Key Hooks Coat Hooks Effective March 17. key hooks. 90″. • For proper installation.0 UOCDZ24879AER 15. 9” 791/2” or 821/2” Cubic Feet UOCDZ24849AEL UOCDZ24849AER AUTHL AUTHR CBO STD • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • ID STD UOCDZ24879AEL UOCDZ24879AER CND 24” 201/2” Frame Opening Height for 851/2” 24” Frame Opening Height for 881/2” 85”1/2 or 88”1/2 581/2” Frame Opening Height MIP 9” EXL EXR FFDL FFDR FB RD RT TD TKP VTK • 3/4X ET Decorative Door Options CG. features five cord cut-out areas and includes a UL listed power strip with three standard 110-volt plug-ins and one USB charging port. or 96″ HIGH.0 UOCDZ24939AER 16. charging station with power strip. • Authentic Ends are standard on one side.Model UTILITY ORGANIZER DROP ZONE CABINET. black plastic grommet for power cord. one magnetic black mesh pencil holder. and three adjustable shelves in lower section.0 UOCDZ24969AEL 16. • One adjustable shelf in upper section on 90″ and 93″.5 UOCDZ24849AER 14. • Charging station functions as an adjustable shelf. Accessories are field installed. 9″ DEEP.5 UOCDZ24879AEL 15. Specify AEL model for installation on the right side of a tall cabinet.0 UOCDZ24909AEL 15.5 UOCDZ24969AER 16. • Tall non-mitered doors will have two center panels with cross rail.5 UOCDZ24909AER 15. 84″. order No Hinge Route doors for a Tall Pantry Pull-Out). • Utility cabinets with depths of 12″ or less must be installed to wall studs or onto the end of another tall cabinet. two adjustable shelves for 96″. 87″. 93″. 2014 .5 UOCDZ24939AEL 16. Pedestal must be covered with toeboard material. • Separate pedestal base included but shipped separately on 93″ and 96″ tall.Model UTILITY DROP ZONE CABINET. charging station with power strip for use in roll tray. 18″ WIDE 18” 15” or 18” Frame Opening Height 84” or 87” Cubic Feet UDZ188424 L or R 25. roll tray will not feature soft-close guides. Power strip should be secured to the roll tray. 84″. and four adjustable reduced depth (21″ deep) shelves in lower section. • Removable charging station sets in roll tray and features three cord cut-out areas and includes a UL listed power strip with three standard 110-volt plug-ins and one USB charging port. 93″.6 UDZ188724 L or R 26. 90″.TOP • • TALL CABINETS • 24” UDZ189024 L or R 18” 18” 24” Frame Opening Height 93” 27” Frame Opening Height 96” 581/2” Frame Opening Height 581/2” Frame Opening Height 24” 24” UDZ189324 L or R UDZ189624 L or R 5” 31/2” 11” 2” Mail Holder 253 11/2” Pencil Holder 53/8” 11/8” Power Strip 2” 85/8” 3” Grommet Effective March 17. and the power strip cord should be secured properly to the cabinet to prevent contact with roll tray guide.4 UDZ189324 L or R 28. black plastic grommet for power cord (for field installation). one magnetic black mesh mail holders. or can be centered.3 UDZ189624 L or R 29. 581/2” Frame Opening Height 24” UDZ188424 L or R UDZ188724 L or R Custom Modifications 18” 201/2” Frame Opening Height 90” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • •* •* CCO CFNTO CFRMO • ID CND DRT • MIP RD • • DRWTK EXB EXL EXR FB •* • • • RT TD TKP • •* RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR VTK *Not available on 93″ and 96″ tall 581/2” Frame Opening Height Decorative Door Options Construction Upgrades APC 3/4X ET PE CG. 87″. • One adjustable shelf in upper section on 90″ and 93″. • Tall non-mitered doors will have two center panels with cross rail. they will be standard depth and may interfere with mail holder and pencil holder on whiteboard. 24″ DEEP. one magnetic black mesh pencil holder. two shelves for 96″. • If depth is reduced to 14″ or less. Consult local electrical/building codes for proper installation. 2014 . • If roll trays for lower section are ordered for field installation. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. or 96″ HIGH.5 UDZ189024 L or R 27. SINGLE DOOR.2 • Features magnetic whiteboard on back of lower door. two shelves for 96″. 87″. 581/2” Frame Opening Height 24” Custom Modifications UDZ368424 UDZ368724 36” 201/2” Frame Opening Height AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • •* •* CCO CFNTO CFRMO • ID CND DRT • MIP RD • • DRWTK EXB EXL EXR FB •* • • • RT TD TKP • •* RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR VTK *Not available on 93″ and 96″ tall 90” TALL CABINETS Decorative Door Options Construction Upgrades APC 581/2” Frame Opening Height 3/4X • ET PE CG. • Tall non-mitered doors will have two center panels with cross rail. one magnetic black mesh pencil holder. • If depth is reduced to 14″ or less. • Separate pedestal base included but shipped separately on 93″ and 96″ tall. two magnetic black mesh mail holders.Model UTILITY DROP ZONE CABINET. • Removable charging station sets in roll tray and features three cord cut-out areas and includes a UL listed power strip with three standard 110-volt plug-ins and one USB charging port.6 UDZ369324 54. and the power strip cord should be secured properly to the cabinet to prevent contact with roll tray guide. • One adjustable shelf in upper section on 90″ and 93″. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. they will be standard depth and may interfere with mail holder and pencil holder on whiteboard. 93″.TOP • • 24” UDZ369024 36” 36” 24” Frame Opening Height 93” 581/2” Frame Opening Height 27” Frame Opening Height 96” 581/2” Frame Opening Height 24” 24” UDZ369324 UDZ369624 5” 31/2” 11” 2” Mail Holder 11/2” Pencil Holder 53/8” 11/8” Power Strip 2” 85/8” 3” Grommet Effective March 17. Power strip should be secured to the roll tray. 24″ DEEP. 90″. • If roll trays for lower section are ordered for field installation. black plastic grommet for power cord (for field installation). Pedestal must be covered with toeboard material. charging station in one roll tray. or 96″ HIGH.2 UDZ368724 50. and eight adjustable reduced depth (21″ deep) shelves in lower section.9 UDZ369024 52. Consult local electrical/building codes for proper installation. 2014 . 36″ WIDE 36” 15” or 18” Frame Opening Height 254 84” or 87” Cubic Feet UDZ368424 49. or can be centered.1 • Features magnetic whiteboards on back of lower doors. DOUBLE DOOR.3 UDZ369624 56. roll tray will not feature soft-close guides. 84″. ) No countertop is needed.4 PTU306124 30. 24″ DEEP 15” or 18” • • • • • • • 491/2” Cubic Feet PTU154924 L or R 12.TOP PE • PTUP154924 15. FPEB is not recommended. installed in cabinet.8 PTU184924 L or R 15.2 PTU364924 29. Custom Modifications AUTHL AUTHR FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFRMO ID DRWTK MIP RD RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP FFDL FFDR VTK • Decorative Door Options Construction Upgrades • DRT • • APC CND 3/4X ET PE CG.TOP PE • PTU304924 24. • Three roll trays are included. • Tall non-mitered doors will have two center panels with cross rail. Tall non-mitered doors will have two center panels with cross rail. installed in cabinet. Be sure to use an end panel skin to connect the seam on side of stacked cabinets. Because of exposed seam when stacking. FPEB is not recommended. • Sets on any 30″ or 36″ wide base. • Can be reduced in depth to 12″. (B30 shown. For full access from both sides of unit.9 • One 15″ adjustable shelf included. Because of exposed seam when stacking. • Be sure to use an end panel skin to connect the seam on side of stacked cabinets.Model PANTRY TOP UNIT. 491/2” EXB Decorative Door Options Construction Upgrades APC CND • Two 15″ adjustable shelves included. do not install against a wall or next to deeper appliances and cabinets. DOUBLE DOOR. (B30 shown. Sets on any 15″ or 18″ wide base (B15 shown). • Three roll trays are included. Custom Modifications AUTHL AUTHR FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFRMO • ID • 3/4X ET • PANTRY TOP UNIT. 2014 TALL CABINETS 24” . • Can be reduced in depth to 12″. Custom Modifications AUTHL AUTHR PTU304924 PTU364924 PTU306124 PTU366124 FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFRMO • ID • • 3/4X ET • PANTRY TOP UNIT with PULL-OUT.) No countertop is needed. • Because of exposed seam when stacking. • Tall non-mitered doors will have two center panels with cross rail.TOP • Effective March 17.0 PTU366124 35. • Be sure to use an end panel skin to connect the seam on side of stacked cabinets. Tall non-mitered doors will have two center panels with cross rail. 49 1/2″ TALL. SINGLE DOOR. Three roll trays are included. Can be reduced in depth to 12″. 24″ DEEP 30” or 36” 30” or 36” DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR 611/2” 24” 24” EXL EXR FB • • • RT TD TKP 255 FFDL FFDR VTK CG. No countertop is needed. • Because of exposed seam when stacking. • Sets on any 30″ or 36″ wide base. No countertop is needed. FPEB is not recommended.8 PTUP184924 18. FPEB is not recommended. 24″ DEEP • • • • • • 491/2” 24” DRT DRWTK • MIP RD • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP FFDL FFDR VTK Decorative Door Options Construction Upgrades APC CND CG. Natural finish pull-out shelves are 20 11/16″ deep. installed in cabinet. Be sure to use an end panel skin to connect the seam on side of stacked cabinets. Sets on any 15″ or 18″ wide base.1 Model Cubic Feet One 15″ adjustable shelf included.7 Two adjustable and one fixed bottom shelf with metallic finish wire rail sides. 2014 .TOP • • Effective March 17. or 18” 9”.6 TPP188424 L or R 25.3 TPP128724 L or R 18. 84″.Model TALL PANTRY PULL-OUT. TPP98724. • 84″ and 87″ high do not include shelves in upper section.5 TPP99024 L or R 14. • For full access from both sides of unit. Natural finish wood pull-out shelves are 20 11/16″ deep.9 TPP159024 L or R 23. 87″.3 TPP158724 L or R 22.7 TPP158424 L or R 21. • Addison TPP98424. or 18” 15” or 18” Opening Height 84” or 87” 201/2” Frame Opening Height 90” 256 24” TPP98424 L or R TPP128424 L or R TPP158424 L or R TPP188424 L or R TPP98724 L or R TPP128724 L or R TPP158724 L or R TPP188724 L or R Cubic Feet TPP98424 L or R 13. 24″ DEEP 9”. Pull-out features top/bottom mounted soft-close full extension guides. do not install against a wall or next to deeper appliances and cabinets.6 TPP98724 L or R 14. 15”. or 90″ TALL.7 TPP129024 L or R 18. and TPP99024 door panels feature a unique raised profile due to the narrow panel width.4 TPP188724 L or R 26. • Tall non-mitered doors will have two center panels with cross rail. TALL CABINETS Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • •+ CCO *Available only on 18″ wide CFNTO CFRMO • 3/4X ET DRT DRWTK EXB EXL EXR FB •* • • • RT TD TKP VTK • • • • ID MIP RD RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR + Not available on 9″ and 12″ wide Decorative Door Options Construction Upgrades APC CND PE CG. 12”. 12”.2 TPP189024 L or R 27. 15”.8 TPP128424 L or R 17.4 24” TPP99024 L or R TPP129024 L or R TPP159024 L or R TPP189024 L or R • Three adjustable shelves and one fixed bottom shelf with metallic finish wire rail sides. Upper section 15″ or 18″. TOP • • TALL CABINETS 24” TPP99324 L or R 27” Opening Height 96” 93” Cubic Feet Effective March 17. 12”. Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO ID DRWTK MIP RD RECTKALL RECTKL RECTKBK RECTKR • 3/4X ET EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades • DRT • • APC CND PE CG.3 TPP99624 L or R 15. do not install against a wall or next to deeper appliances and cabinets.Model TALL PANTRY PULL-OUT. or can be centered.7 TPP129624 L or R 20. • Addison TPP99324 and TPP99624 door panels feature a unique raised profile due to the narrow panel width. 93″ or 96″ TALL. • Tall non-mitered doors will have two center panels with cross rail. Pedestal must be covered with toeboard material. 24″ DEEP 9”. or 18” 24” Frame Opening Height TPP99324 L or R TPP129324 L or R TPP159324 L or R TPP189324 L or R 15. Pull-out features top/bottom mounted soft-close full extension guides.2 TPP129324 L or R 19. Natural finish wood pull-out shelves are 20 11/16″ deep.2 24” TPP99624 L or R TPP129624 L or R TPP159624 L or R TPP189624 L or R 257 • Three adjustable shelves and one fixed bottom shelf with metallic finish wire rail sides. 15”.2 TPP159624 L or R 24. • For full access from both sides of unit.9 TPP189324 L or R 28. • Separate pedestal base included but shipped separately on 93″ and 96″ tall.6 TPP159324 L or R 23. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.7 TPP189624 L or R 29. 2014 . 90″. or can be centered.6 • Full extension Pot and Pan Rack features six chrome hooks and is mounted to the top of the cabinet. or 96″ TALL. Pedestal must be covered with toeboard material. 93″.6 US219324 L or R 32. • Separate pedestal base included but shipped separately on 93″ and 96″ tall.6 • If Decorative Door End panels are desired see DADOORB and DADOORW.5 US218724 L or R 30. 24″ DEEP 21” 84” 87” or 90” 30” High Frame Opening Height for 84” 33” High Frame Opening Height for 87” 36” High Frame Opening Height for 90” 461/2” Frame Opening Height US218424PP L or R 29. 84″.TOP • US219324PP L or R US219624PP L or R Effective March 17. • Separate pedestal base included but shipped separately on 93″ and 96″ tall. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. 93″. Custom Modifications US218424PP L or R US218724PP L or R US219024PP L or R 24” AUTHL AUTHR 39” High Frame Opening Height for 96” 93” or 96” • FPEB FTK FTKAV FTKFV • •* •* 24” CFNTO CFRMO • ID CND • MIP RD DRT DRWTK EXB EXL EXR FB •* • • • RT TD TKP VTK •* •* RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR *Not available on 93″ and 96″ tall Decorative Door Options Construction Upgrades APC 461/2” Frame Opening Height CCO • 21” 36” High Frame Opening Height for 93” CBO • 3/4X ET PE CG. • Full extension pantry pull-out with four plywood shelves and metal rails. Custom Modifications AUTHL AUTHR CBO CCO • • FPEB FTK FTKAV FTKFV • •* •* CFNTO CFRMO • ID CND DRT • MIP RD DRWTK EXB EXL EXR FB •* • • • RT TD TKP VTK •* •* RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR *Not available on 93″ and 96″ tall Decorative Door Options Construction Upgrades APC 3/4X ET • PE CG. Maximum Weight Capacity: 47 lbs. • Full extension pantry pull-out with four plywood shelves and metal rails.6 US219324PP L or R 32. • Tall non-mitered doors will have two center panels with cross rail. or 96″ TALL. 2014 . or can be centered. Pedestal must be covered with toeboard material.Model UTILITY STORAGE with PANTRY PULL-OUT.5 US219024 L or R 31.TOP • • 24” TALL CABINETS US219324 L or R US219624 L or R UTILITY STORAGE with PANTRY PULL-OUT and POT and PAN RACK.6 US219624 L or R 33.6 US219624PP L or R 33. • Tall non-mitered doors will have two center panels with cross rail. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.5 US219024PP L or R 31. 87″. 84″. 90″. 87″. 24″ DEEP 21” 84” 87” or 90” 30” High Frame Opening Height for 84” 33” High Frame Opening Height for 87” 36” High Frame Opening Height for 90” 461/2” Frame Opening Height 258 US218424 L or R US218724 L or R US219024 L or R 24” 21” 36” High Frame Opening Height for 93” 39” High Frame Opening Height for 96” 93” or 96” 461/2” Frame Opening Height Cubic Feet US218424 L or R 29.5 US218724PP L or R 30. mounting rails. 84″. Door mounted rack includes 6 adjustable shelves and one fixed shelf. Swing-outs include 4 adjustable shelves and 3 fixed shelves. mounting rails. use TF384 when installed against wall (or next to a full depth refrigerator. 2014 TALL CABINETS 24” . 87″. or 96″ TALL. • Swing-out units.) • Tall non-mitered doors will have two center panels with cross rail.Model PANTRY UNIT. Swing-outs include 4 adjustable shelves and 3 fixed shelves.4 PY369024 52. use TF387 when installed against wall (or next to a full depth refrigerator.2 Model PY188424 L or R PY188724 L or R 24” 36” PY368424 PY368724 PY188724 L or R 26. swing-out units. • 1 full depth adjustable shelf. 84” or 87” 84” or 87” Cubic Feet • Swing-out units. • For PY18. • Wood inserts are 56″ high. 24″ DEEP 18” PY188424 L or R 25.TOP • • 90” PY189024 L or R 4 1 /2 ” SHELF SHELF 11” LARGE INSERT 4 1 /2 ” 11” 8 5 /8 ” 8 5 /8 ” 4 1 /2 ” 8 5 /8 ” LARGE INSERT 36” 201/2” Frame Opening Height 5” 5” SMALL INSERT 11” 11” FRONT OF CABINET DOOR HINGED RIGHT FRONT OF CABINET DOOR HINGED LEFT PY18R PY18L SHELF LARGE INSERT LARGE INSERT 11” 11” 24” SMALL INSERT SHELF 5” 4 1 /2 ” 8 5 /8 ” 11” 11” SMALL INSERT SMALL INSERT 5” FRONT OF CABINET PY36 Wood inserts for all styles: • Top view of wood inserts positioning and size. • Door mounted rack includes 6 adjustable shelves and one fixed shelf. door mounted racks. 90″. Door mounted rack includes 6 adjustable shelves and one fixed shelf.9 Cubic Feet PY189024 L or R 27. 93″.6 • Swing-out units.6 PY368424 49. Swing-outs include 4 adjustable shelves and 3 fixed shelves. mounting rails. Door mounted rack includes 6 adjustable shelves and one fixed shelf.5 PY368724 50. use TF390 when installed against wall (or next to a full depth refrigerator. and door racks have natural finish wood adjustable shelves with metallic finish wire rail fronts and 4 1/2″ deep adjustable shelves included but shipped separately. 90” PY369024 24” Effective March 17. 259 Custom Modifications 18” 201/2” Frame Opening Height AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO CFRMO • CND 3/4X ET • DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • ID MIP RD RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR Decorative Door Options Construction Upgrades APC DRT PE CG.) • Tall non-mitered doors will have two center panels with cross rail. and 4 1/2″ deep adjustable shelves included but shipped separately. • For PY18. Swingouts include 4 adjustable shelves and 3 fixed shelves. • For PY18. and door racks have natural finish wood adjustable shelves with metallic finish wire rail fronts and 4 1/2″ deep adjustable shelves included but shipped separately. and door racks have natural finish wood adjustable shelves with metallic finish wire rail fronts and 4 1/2″ deep adjustable shelves included but shipped separately.) • Tall non-mitered doors will have two center panels with cross rail. • Separate pedestal base included but shipped separately on 96″ tall. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.1 • Swing-out units. 90″. and 4 1/2″ deep adjustable shelves included but shipped separately. Swing-outs include 4 adjustable shelves and 3 fixed shelves. 87″. and door racks have natural finish wood adjustable shelves with metallic finish wire rail fronts and 4 1/2″ deep adjustable shelves included but shipped separately. AUTHL AUTHR CBO • • • FTK FTKAV FTKFV CCO CFNTO CFRMO • PY189624 L or R 29.TOP • • 18” 4 1 /2 ” SHELF SHELF 11” LARGE INSERT 4 1 /2 ” 11” 8 5 /8 ” 8 5 /8 ” 41 /2 ” 8 5 /8 ” LARGE INSERT PY189624 L or R 5” 5” SMALL INSERT 11” 11” FRONT OF CABINET DOOR HINGED RIGHT FRONT OF CABINET DOOR HINGED LEFT PY18R PY18L LARGE INSERT LARGE INSERT 11” 11” 96” SMALL INSERT SHELF 5” 8 5 /8 ” 11” 11” SMALL INSERT SMALL INSERT 5” FRONT OF CABINET PY36 Wood inserts for all styles: • Top view of wood inserts positioning and size.2 PY369624 56. 84″. 2014 . • 1 full depth adjustable shelf. door mounted racks. • For PY18. CND DRT DRWTK • ID MIP • RD RECTKALL RECTKL RECTKBK RECTKR • 3/4X ET • EXB EXL EXR FB • • • RT TD TKP VTK SHELF 41 /2 ” • FFDL FFDR • Decorative Door Options Construction Upgrades APC TALL CABINETS Cubic Feet Custom Modifications FPEB 24” Model PE CG. Swing-outs include 4 adjustable shelves and 3 fixed shelves. 93″. or can be centered. mounting rails.) • Tall non-mitered doors will have two center panels with cross rail. use TF393 when installed against wall (or next to a full depth refrigerator. Door mounted rack includes 6 adjustable shelves and one fixed shelf. or can be centered. door mounted racks. Pedestal must be covered with toeboard material. • 2 full depth adjustable shelves. • Door mounted rack includes 6 adjustable shelves and one fixed shelf. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. and 4 1/2″ deep adjustable shelves included but shipped separately. mounting rails.) • Tall non-mitered doors will have two center panels with cross rail. or 96″ TALL.3 • Swing-out units. Door mounted rack includes 6 adjustable shelves and one fixed shelf. • Separate pedestal base included but shipped separately on 93″ tall. 24” 36” 27” Frame Opening Height 96” PY369624 24” Effective March 17.3 PY369324 54. Swing-outs include 4 adjustable shelves and 3 fixed shelves. • Door mounted rack includes 6 adjustable shelves and one fixed shelf. and door racks have natural finish wood adjustable shelves with metallic finish wire rail fronts and 4 1/2″ deep adjustable shelves included but shipped separately.Model PANTRY UNIT. • For PY18. swing-out units. Pedestal must be covered with toeboard material. 24″ DEEP (cont’d) 18” 24” Frame Opening Height 93” PY189324 L or R 260 24” 36” 24” Frame Opening Height 93” PY369324 Cubic Feet PY189324 L or R 28. • Wood inserts are 56″ high. use TF396 when installed against wall (or next to a full depth refrigerator. Swing-outs include 4 adjustable shelves and 3 fixed shelves. swing-out units. 2014 TALL CABINETS 84” . Heat shields are sold separately as an accessory.2 • • • • Full overlay styles feature face mount hinges. For depths of 6″-8″. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.Model SINGLE OVEN CABINET. • For built-in appliance support. cabinet will not include toekick/pedestal. 24” Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • • 3/4X • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND 261 CG. Oven install kit will not be included when depth is modified.3 OCS338424 45.TOP PE • 15” FRAME OPENING HEIGHT 9” 21” 28 1/2” 15” FRAME OPENING HEIGHT 9” MAX CUTOUT 25 1/4” X 43 1/2” (SHADED) 24” 28 1/2” 15” FRAME OPENING HEIGHT 9” MAX CUTOUT 28 1/4” X 43 1/2” (SHADED) 27” 28 1/2” 9” 9” 9” 15” 15” 15” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS278424 OCS308424 OCS338424 MAX CUTOUT 31 1/4” X 43 1/2” (SHADED) Effective March 17. • Depth can be reduced to a minimum of 6″. All top and bottom cross rails are 1 1/2″ wide. 24″ DEEP Cubic Feet OCS278424 37. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 84″ TALL.4 OCS308424 41. All cabinets have 3″ stiles on frame. cabinet will not include toekick/pedestal.7 OCS308724 42.Model SINGLE OVEN CABINET. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 30”. All cabinets have 3″ stiles on frame. • For built-in appliance support.8 • • • • Full overlay styles feature face mount hinges.TOP PE • 9” 21” 28 1/2” 9” 9” MAX CUTOUT 25 1/4” X 43 1/2” (SHADED) 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT TALL CABINETS DRWTK • Construction Upgrades APC CND 24” 28 1/2” MAX CUTOUT 28 1/4” X 43 1/2” (SHADED) 27” MAX CUTOUT 31 1/4” X 43 1/2” (SHADED) 28 1/2” 9” 9” 9” 15” 15” 15” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS278724 OCS308724 OCS338724 Effective March 17. or 33” Cubic Feet OCS278724 38. • Depth can be reduced to a minimum of 6″. 87” 262 Custom Modifications 24” AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • • 3/4X • ET DRT EXB EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options CG. 2014 . Heat shields are sold separately as an accessory. 24″ DEEP 27”. For depths of 6″-8″. Oven install kit will not be included when depth is modified. All top and bottom cross rails are 1 1/2″ wide. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).8 OCS338724 46. 87″ TALL. 2014 TALL CABINETS 24” . All top and bottom cross rails are 1 1/2″ wide. • Depth can be reduced to a minimum of 6″.2 OCS339024 48.Model SINGLE OVEN CABINET. Includes one adjustable shelf. cabinet will not include toekick/pedestal. 90″ TALL. or 33” Cubic Feet OCS279024 40. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 24″ DEEP 27”. • For built-in appliance support. All cabinets have 3″ stiles on frame.TOP PE • 20 1/2” FRAME OPENING HEIGHT 28 1/2” MAX CUTOUT 25 1/4” X 43 1/2” (SHADED) 24” 28 1/2” 20 1/2” FRAME OPENING HEIGHT 9 1/2” 9 1/2” 9 1/2” 21” 20 1/2” FRAME OPENING HEIGHT MAX CUTOUT 28 1/4” X 43 1/2” (SHADED) 27” MAX CUTOUT 31 1/4” X 43 1/2” 28 1/2” 9” 9” 9” 15” 15” 15” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS279024 OCS309024 OCS339024 Effective March 17. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).4 • • • • • Full overlay styles feature face mount hinges. 30”. 90” 263 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND CG. Oven install kit will not be included when depth is modified.0 OCS309024 44. Heat shields are sold separately as an accessory. For depths of 6″-8″. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.TOP PE • 24” FRAME OPENING HEIGHT TALL CABINETS DRWTK • Construction Upgrades APC CND MAX CUTOUT 25 1/4” X 43 1/2” (SHADED) 24” 24” FRAME OPENING HEIGHT 9” 9” 9” 21” 24” FRAME OPENING HEIGHT MAX CUTOUT 28 1/4” X 43 1/2” (SHADED) 27” 28 1/2” 28 1/2” 9” 9” 9” 15” 15” 15” 28 1/2” Pedestal Pedestal Pedestal OCS279324 OCS309324 OCS339324 MAX CUTOUT 31 1/4” X 43 1/2” (SHADED) Effective March 17. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).3 OCS309324 45. 2014 . For depths of 6″-8″. • For built-in appliance support.0 • • • • • 93” 264 24” 3” Stile 3” Stile Full overlay styles feature face mount hinges. Oven install kit will not be included when depth is modified.7 OCS339324 50. Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • • 3/4X • ET DRT ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options CG.Model SINGLE OVEN CABINET. 93″ TALL. or can be centered. • Depth can be reduced to a minimum of 6″. 30”. or 33” Cubic Feet OCS279324 41. Pedestal must be covered with toeboard material. Includes one adjustable shelf. 24″ DEEP 27”. Heat shields are sold separately as an accessory. cabinet will not include toekick/pedestal. • Separate pedestal base included but shipped separately on 93″ tall. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. All cabinets have 3″ stiles on frame. All top and bottom cross rails are 1 1/2″ wide. or 33” Cubic Feet OCS279624 42.Model SINGLE OVEN CABINET. 2014 TALL CABINETS 96” . cabinet will not include toekick/pedestal. 24” 3” Stile 3” Stile 265 Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • CFNTO CFRMO • 3/4X • ET DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades APC CND CG. • Depth can be reduced to a minimum of 6″. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.1 OCS339624 51. Pedestal must be covered with toeboard material. 30”.TOP PE • 27” FRAME OPENING HEIGHT 9” 9” 28 1/2” 27” FRAME OPENING HEIGHT MAX CUTOUT 25 1/4” X 43 1/2” (SHADED) 28 1/2” 27” FRAME OPENING HEIGHT 9” MAX CUTOUT 28 1/4” X 43 1/2” (SHADED) 28 1/2” 21” 24” 27” 9” 9” 9” 15” 15” 15” Pedestal Pedestal Pedestal OCS279624 OCS309624 OCS339624 MAX CUTOUT 31 1/4” X 43 1/2” (SHADED) Effective March 17. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).6 OCS309624 47. Heat shields are sold separately as an accessory. • Separate pedestal base included but shipped separately on 96″ tall. All top and bottom cross rails are 1 1/2″ wide. Oven install kit will not be included when depth is modified. • For built-in appliance support. 96″ TALL.6 • • • • • Full overlay styles feature face mount hinges. or can be centered. 24″ DEEP 27”. Includes two adjustable shelves. For depths of 6″-8″. All cabinets have 3″ stiles on frame. Heat shields are sold separately as an accessory.2 • • • • Full overlay styles feature concealed face mount hinges. 24″ DEEP 27”.TOP PE • 15” FRAME OPENING HEIGHT 9” 9” 21” EXB RECTKALL RECTKL RECTKBK RECTKR 15” FRAME OPENING HEIGHT 25 1/2” DRWTK • MIP Construction Upgrades APC CND MAX CUTOUT 25 1/4” X 42 1/4” (SHADED) 24” 25 1/2” 15” FRAME OPENING HEIGHT 9” MAX CUTOUT 28 1/4” X 42 1/4” (SHADED) 27” MAX CUTOUT 31 1/4” X 42 1/4” (SHADED) 25 1/2” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS278424DD OCS308424DD OCS338424DD Effective March 17. or 33” Cubic Feet OCS278424DD 37. 84” 266 24” 3” Stile 3” Stile Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO CFRMO • ID 3/4X • • ET DRT RD • • TALL CABINETS EXL EXR FB • • • • RT TD TKP VTK • • • • FFDL FFDR Decorative Door Options CG. • 3/4X not available on deep drawer. • For built-in appliance support.4 OCS308424DD 41. 30”. • Depth can be reduced to a minimum of 12″. DEEP DRAWER. All cabinets have 3″ stiles on frame. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.3 OCS338424DD 45. 84″ TALL. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). All top and bottom cross rails are 1 1/2″ wide. Oven install kit will not be included when depth is modified. 2014 .Model SINGLE OVEN CABINET. All top and bottom cross rails are 1 1/2″ wide. • For built-in appliance support. • Depth can be reduced to a minimum of 12″. 24” 3” Stile 3” Stile 267 Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO CFRMO • ID 3/4X • • ET DRT RD • • 9” EXL EXR FB • • • • RT TD TKP VTK • • • • FFDL FFDR Decorative Door Options CG.7 OCS308724DD 42. 30”. 87″ TALL. DEEP DRAWER. 24″ DEEP 27”.8 • • • • Full overlay styles feature concealed face mount hinges. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).Model SINGLE OVEN CABINET. Oven install kit will not be included when depth is modified. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. All cabinets have 3″ stiles on frame.TOP PE • MAX CUTOUT 25 1/4” X 42 1/4” (SHADED) 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 9” 9” 21” EXB RECTKALL RECTKL RECTKBK RECTKR 18” FRAME OPENING HEIGHT 25 1/2” DRWTK • MIP Construction Upgrades APC CND 24” 25 1/2” 9” 9” MAX CUTOUT 28 1/4” X 42 1/4” (SHADED) 27” 25 1/2” MAX CUTOUT 31 1/4” X 42 1/4” (SHADED) 9” 9 1/4” 9 1/4” 9 1/4” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS278724DD OCS308724DD OCS338724DD Effective March 17. 2014 TALL CABINETS 87” . Heat shields are sold separately as an accessory. or 33” Cubic Feet OCS278724DD 38. • 3/4X not available on deep drawer.8 OCS338724DD 46. 4 Full overlay styles feature concealed face mount hinges. or 33” • • • • 90” • • • • 268 24” 3” Stile 3” Stile Cubic Feet OCS279024DD 40. Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO CFRMO • ID 3/4X • • ET DRT MIP RD • • TALL CABINETS FB • • • • RT TD TKP VTK • • • • FFDL FFDR CG.TOP PE • 20 1/2” FRAME OPENING HEIGHT 9 1/2” 21” 24” MAX CUTOUT 25 1/4” X 42 1/4” (SHADED) 27 3/4” 27 3/4” 9” 9” 2” EXL EXR RECTKALL RECTKL RECTKBK RECTKR 9 1/2” 4 1/2” EXB • 20 1/2” FRAME OPENING HEIGHT 9 1/4” DRWTK Decorative Door Options Construction Upgrades APC CND 9 1/4” 2” 4 1/2” 20 1/2” FRAME OPENING HEIGHT 9 1/2” MAX CUTOUT 28 1/4” X 42 1/4” (SHADED) 27” MAX CUTOUT 31 1/4” X 42 1/4” (SHADED) 27 3/4” 9” 9 1/4” 2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS279024DD OCS309024DD OCS339024DD Effective March 17. 90″ TALL. All cabinets have 3″ stiles on frame. Oven install kit will not be included when depth is modified. For built-in appliance support. 2014 . Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 3/4X not available on deep drawer. DEEP DRAWER.0 OCS309024DD 44. Depth can be reduced to a minimum of 12″.Model SINGLE OVEN CABINET. Heat shields are sold separately as an accessory. 30”. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). One full depth adjustable shelf included. 24″ DEEP 27”. All top and bottom cross rails are 1 1/2″ wide. but packaged separately.2 OCS339024DD 48. 24″ DEEP 27”. All top and bottom cross rails are 1 1/2″ wide. All cabinets have 3″ stiles on frame.TOP • 24” FRAME OPENING HEIGHT 9” MAX CUTOUT 24” 25 1/4” X 42 1/4” (SHADED) 9 1/4” EXL EXR RECTKALL RECTKL RECTKBK RECTKR PE 9” 27 3/4” EXB • 24” FRAME OPENING HEIGHT 21” DRWTK Decorative Door Options Construction Upgrades APC CND 24” FRAME OPENING HEIGHT 9” MAX CUTOUT 27” 28 1/4” X 42 1/4” (SHADED) 27 3/4” 9” 9 1/4” 2” MAX CUTOUT 31 1/4” X 42 1/4” (SHADED) 27 3/4” 9” 9 1/4” 2” 4 1/2” 4 1/2” 4 1/2” Pedestal Pedestal Pedestal OCS279324DD OCS309324DD OCS339324DD Effective March 17. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. 269 Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • ID • 3/4X • • ET DRT MIP RD • • 9” 2” FB • • • RT TD TKP • FFDL FFDR VTK • CG.3 OCS309324DD 45. or can be centered. Heat shields are sold separately as an accessory. Separate pedestal base included but shipped separately on 93″ tall.7 OCS339324DD 50. 30”. For built-in appliance support. One full depth adjustable shelf included. DEEP DRAWER. Oven install kit will not be included when depth is modified. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 3/4X not available on deep drawer. Pedestal must be covered with toeboard material. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). but packaged separately.Model SINGLE OVEN CABINET. 2014 TALL CABINETS 24” • • • • Cubic Feet . or 33” • • • • 93” • 3” Stile 3” Stile OCS279324DD 41. Depth can be reduced to a minimum of 12″. 93″ TALL.0 Full overlay styles feature concealed face mount hinges. 6 Full overlay styles feature concealed face mount hinges.Model SINGLE OVEN CABINET.6 OCS309624DD 47. or can be centered. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. but packaged separately. DEEP DRAWER. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 3/4X not available on deep drawer. Depth can be reduced to a minimum of 12″. 24″ DEEP 27”. For built-in appliance support. Heat shields are sold separately as an accessory. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.TOP PE • 27” FRAME OPENING HEIGHT 9” 27 3/4” DRWTK • MIP Construction Upgrades APC CND 27” FRAME OPENING HEIGHT 9” MAX CUTOUT 25 1/4” X 42 1/4” (SHADED) 27 3/4” 27” FRAME OPENING HEIGHT 9” MAX CUTOUT 28 1/4” X 42 1/4” (SHADED) 27 3/4” 21” 24” 27” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” MAX CUTOUT 31 1/4” X 42 1/4” (SHADED) 4 1/2” 4 1/2” 4 1/2” Pedestal Pedestal Pedestal OCS279624DD OCS309624DD OCS339624DD Effective March 17. Two full depth adjustable shelves included.1 OCS339624DD 51. Oven install kit will not be included when depth is modified. Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • ID • 3/4X • • ET DRT RD • • RECTKALL RECTKL RECTKBK RECTKR TALL CABINETS EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options CG. 30”. All cabinets have 3″ stiles on frame. or 33” • • • • 96” • • • • • 270 24” 3” Stile 3” Stile Cubic Feet OCS279624DD 42. Separate pedestal base included but shipped separately on 96″ tall. 96″ TALL. 2014 . Pedestal must be covered with toeboard material. All top and bottom cross rails are 1 1/2″ wide. Model SINGLE OVEN CABINET. 24″ DEEP 27”.4 OCS308424WD 41. Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND 271 CG. 84″ TALL. All top and bottom cross rails are 1 1/2″ wide. Heat shields are sold separately as an accessory. or 33” Cubic Feet OCS278424WD 37. Oven install kit will not be included when depth is modified. 30”. 2014 TALL CABINETS 84” . Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. • Depth can be reduced to a minimum of 12″. All cabinets have 3″ stiles on frame.TOP PE • 15” FRAME OPENING HEIGHT 9” 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 9” 21” MAX CUTOUT* 25 1/4” X 42 1/4” (SHADED) 25 1/2” 9” 24” 25 1/2” 9” 27” MAX CUTOUT* 28 1/4” X 42 1/4” (SHADED) 25 1/2” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9 1/4” MAX CUTOUT* 31 1/4” X 42 1/4” (SHADED) 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS278424WD OCS308424WD OCS338424WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17.2 • • • • Full overlay styles feature face mount hinges.3 OCS338424WD 45. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). WARMING DRAWER. • For built-in appliance support. Heat shields are sold separately as an accessory. • Depth can be reduced to a minimum of 12″. WARMING DRAWER. All top and bottom cross rails are 1 1/2″ wide.7 OCS308724WD 42.8 • • • • Full overlay styles feature face mount hinges.Model SINGLE OVEN CABINET. 30”. or 33” Cubic Feet OCS278724WD 38. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).8 OCS338724WD 46.TOP PE • 9” 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 9” 21” TALL CABINETS DRWTK Decorative Door Options Construction Upgrades APC CND 9” 24” MAX CUTOUT* 25 1/4” X 42 1/4” (SHADED) 25 1/2” 9” 25 1/2” 27” MAX CUTOUT* 28 1/4” X 42 1/4” (SHADED) 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9 1/4” MAX CUTOUT* 31 1/4” X 42 1/4” (SHADED) 25 1/2” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) 9 1/4” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS278724WD OCS308724WD OCS338724WD *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. 87″ TALL. 2014 . 87” 272 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR CG. All cabinets have 3″ stiles on frame. Oven install kit will not be included when depth is modified. • For built-in appliance support. 24″ DEEP 27”. WARMING DRAWER.4 • • • • Full overlay styles feature face mount hinges. • For built-in appliance support.Model SINGLE OVEN CABINET.TOP PE • 20 1/2” FRAME OPENING HEIGHT 9 1/2” 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 9 1/2” 21” MAX CUTOUT* 25 1/4” X 42 1/4” (SHADED) 27 3/4” 9” 24” 27 3/4” 9 1/2” 27” MAX CUTOUT* 28 1/4” X 42 1/4” (SHADED) 27 3/4” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9 1/4” MAX CUTOUT* 31 1/4” X 42 1/4” (SHADED) 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” 2” 2” 2” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCS279024WD OCS309024WD OCS339024WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Heat shields are sold separately as an accessory. All cabinets have 3″ stiles on frame. • Depth can be reduced to a minimum of 12″. 30”. 24″ DEEP 27”.2 OCS339024WD 48. 2014 TALL CABINETS 90” . All top and bottom cross rails are 1 1/2″ wide.0 OCS309024WD 44. 90″ TALL. Oven install kit will not be included when depth is modified. Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND 273 CG. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). or 33” Cubic Feet OCS279024WD 40. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Heat shields are sold separately as an accessory.7 OCS339324WD 50. 93″ TALL.3 OCS309324WD 45. All cabinets have 3″ stiles on frame. 2014 . 30”. 93” 274 24” 3” Stile 3” Stile Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • • 3/4X • • ET DRT MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options CG. WARMING DRAWER.0 • • • • Full overlay styles feature face mount hinges. • Depth can be reduced to a minimum of 12″. • Separate pedestal base included but shipped separately on 93″ tall. or 33” Cubic Feet OCS279324WD 41. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. 24″ DEEP 27”.Model SINGLE OVEN CABINET. All top and bottom cross rails are 1 1/2″ wide. Oven install kit will not be included when depth is modified. or can be centered. • For built-in appliance support.TOP PE • 24” FRAME OPENING HEIGHT 9” TALL CABINETS DRWTK • ID Construction Upgrades APC CND 24” FRAME OPENING HEIGHT 24” FRAME OPENING HEIGHT 9” 21” 9” 24” 27 3/4” 9” 9 1/4” MAX CUTOUT* 25 1/4” X 42 1/4” (SHADED) 27 3/4” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 27” MAX CUTOUT* 28 1/4” X 42 1/4” (SHADED) 27 3/4” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” MAX CUTOUT* 31 1/4” X 42 1/4” (SHADED) 9” MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) 4 1/2” 4 1/2” 4 1/2” Pedestal Pedestal Pedestal OCS309324WD OCS339324WD OCS279324WD *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. Pedestal must be covered with toeboard material. • Depth can be reduced to a minimum of 12″. 96″ TALL. WARMING DRAWER. 24″ DEEP 27”. 2014 TALL CABINETS 24” . • For built-in appliance support. Oven install kit will not be included when depth is modified.Model SINGLE OVEN CABINET. 30”. All top and bottom cross rails are 1 1/2″ wide. Pedestal must be covered with toeboard material. or 33” Cubic Feet OCS279624WD 42. • Separate pedestal base included but shipped separately on 96″ tall. or can be centered. Heat shields are sold separately as an accessory.1 OCS339624WD 51. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.6 OCS309624WD 47. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). All cabinets have 3″ stiles on frame.TOP PE • 27” FRAME OPENING HEIGHT 9” 27” FRAME OPENING HEIGHT 27” FRAME OPENING HEIGHT 9” 21” 9” 24” 27 3/4” 9” 9 1/4” MAX CUTOUT* 25 1/4” X 42 1/4” (SHADED) 27 3/4” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 27” MAX CUTOUT* 28 1/4” X 42 1/4” (SHADED) 27 3/4” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 4 1/2” 4 1/2” 4 1/2” Pedestal Pedestal Pedestal OCS309624WD OCS339624WD OCS279624WD MAX CUTOUT* 31 1/4” X 42 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.6 • • • • Full overlay styles feature face mount hinges. 96” 275 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • • 3/4X • • ET DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades APC CND CG. 24″ DEEP 27”. or 33” Cubic Feet OCD278424 37.Model DOUBLE OVEN CABINET. • Depth can be reduced to a minimum of 12″. • For built-in appliance support.TOP PE • 15” FRAME OPENING HEIGHT TALL CABINETS DRWTK Decorative Door Options Construction Upgrades APC CND 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 9” 9” 9” 21” 24” 27” 39” 39” MAX CUTOUT 25 1/4” X 60” (SHADED) MAX CUTOUT 28 1/4” X 60” (SHADED) 39” 9” 9” 9” 4 1/2” 4 1/2” 4 1/2” MAX CUTOUT 31 1/4” X 60” (SHADED) Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278424 OCD308424 OCD338424 Effective March 17. All cabinets have 3″ stiles on frame.4 OCD308424 41.3 OCD338424 45. 2014 . Oven install kit will not be included when depth is modified. 84″ TALL. 84” 276 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR CG. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 30”.2 • • • • Full overlay styles feature face mount hinges. Heat shields are sold separately as an accessory. All top and bottom cross rails are 1 1/2″ wide. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Model DOUBLE OVEN CABINET. All cabinets have 3″ stiles on frame. All top and bottom cross rails are 1 1/2″ wide. 30”. Oven install kit will not be included when depth is modified. or 33” Cubic Feet OCD278724 38. • Depth can be reduced to a minimum of 12″.TOP PE • 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 9” 9” 9” 21” 24” 27” 39” 39” MAX CUTOUT 25 1/4” X 60” (SHADED) MAX CUTOUT 28 1/4” X 60” (SHADED) 39” 9” 9” 9” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278724 OCD308724 OCD338724 MAX CUTOUT 31 1/4” X 60” (SHADED) Effective March 17.7 OCD308724 42. 87″ TALL.8 OCD338724 46. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). • For built-in appliance support. 2014 TALL CABINETS 87” . 24″ DEEP 27”. Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND 277 CG. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Heat shields are sold separately as an accessory.8 • • • • Full overlay styles feature face mount hinges. TOP PE • 20 1/2” FRAME OPENING HEIGHT 9 1/2” 9 1/2” TALL CABINETS EXB • 20 1/2” FRAME OPENING HEIGHT MAX CUTOUT 25 1/4” X 60” (SHADED) 39” 20 1/2” FRAME OPENING HEIGHT 9 1/2” 24” 21” 39” DRWTK Decorative Door Options Construction Upgrades APC CND 27” Max Cutout 28 1/4” X 60” (SHADED) MAX CUTOUT 31 1/4” X 60” (SHADED) 39” 9” 9” 9” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD279024 OCD309024 OCD339024 Effective March 17. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 90″ TALL. • For built-in appliance support. 24″ DEEP 27”.Model DOUBLE OVEN CABINET. 2014 . OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). All cabinets have 3″ stiles on frame. 90” 278 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR CG. All top and bottom cross rails are 1 1/2″ wide. One adjustable shelf included but packaged separately. Heat shields are sold separately as an accessory. or 33” Cubic Feet OCD279024 40.0 OCD309024 44. Oven install kit will not be included when depth is modified.2 OCD339024 48.4 • • • • • Full overlay styles feature face mount hinges. 30”. • Depth can be reduced to a minimum of 12″. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. • Separate pedestal base included but shipped separately on 93″ tall.3 OCD309324 45.7 OCD339324 50. 93″ TALL. or can be centered. One adjustable shelf included but packaged separately. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). or 33” Cubic Feet OCD279324 41. Heat shields are sold separately as an accessory.TOP PE • 24” FRAME OPENING HEIGHT 9” 24” FRAME OPENING HEIGHT 9” MAX CUTOUT 25 1/4” X 60” (SHADED) 39” 24” FRAME OPENING HEIGHT 9” 24” 21” 39” DRWTK • ID Construction Upgrades APC CND 27” MAX CUTOUT 28 1/4” X 60” (SHADED) 39” 9” 9” 9” 4 1/2” 4 1/2” 4 1/2” Pedestal Pedestal Pedestal OCD279324 OCD309324 OCD339324 MAX CUTOUT 31 1/4” X 60” (SHADED) Effective March 17. All cabinets have 3″ stiles on frame.0 • • • • • Full overlay styles feature face mount hinges. 30”. • Depth can be reduced to a minimum of 12″. 93” 24” 279 Custom Modifications 3” Stile AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • • 3/4X • • ET DRT MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options CG. All top and bottom cross rails are 1 1/2″ wide. 2014 TALL CABINETS 3” Stile . 24″ DEEP 27”. • For built-in appliance support. Pedestal must be covered with toeboard material.Model DOUBLE OVEN CABINET. Oven install kit will not be included when depth is modified. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Model DOUBLE OVEN CABINET. All cabinets have 3″ stiles on frame. Heat shields are sold separately as an accessory. 96″ TALL.6 • • • • • • Full overlay styles feature face mount hinges.1 OCD339624 51. 96” 280 24” 3” Stile 3” Stile Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • • 3/4X • • ET DRT MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • VTK • CG.TOP • 27” FRAME OPENING HEIGHT 27” FRAME OPENING HEIGHT 9” 9” 9” 39” 39” 39” 21” FFDL FFDR Decorative Door Options PE 27” FRAME OPENING HEIGHT TALL CABINETS DRWTK • ID Construction Upgrades APC CND MAX CUTOUT 25 1/4” X 60” (SHADED) 24” MAX CUTOUT 28 1/4” X 60” (SHADED) 27” 9” 9” 9” 4 1/2” 4 1/2” 4 1/2” Pedestal Pedestal Pedestal OCD279624 OCD309624 OCD339624 MAX CUTOUT 31 1/4” X 60” (SHADED) Effective March 17. 30”. • Depth can be reduced to a minimum of 12″. All toekick areas are 4 1/2″ high.6 OCD309624 47. Pedestal must be covered with toeboard material. 2014 . • Separate pedestal base included but shipped separately on 96″ tall. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. or can be centered. • For built-in appliance support. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 24″ DEEP 27”. Oven install kit will not be included when depth is modified. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. or 33” Cubic Feet OCD279624 42. Two adjustable shelves included but packaged separately. All top and bottom cross rails are 1 1/2″ wide. 84″ TALL. Heat shields are sold separately as an accessory. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). • For built-in appliance support. 2014 TALL CABINETS 84” . Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 30”. or 33” Cubic Feet OCD278424DD 37. Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND 281 CG. 24″ DEEP 27”. All cabinets have 3″ stiles on frame. All top and bottom cross rails are 1 1/2″ wide.4 OCD308424DD 41.Model DOUBLE OVEN CABINET. • Depth can be reduced to a minimum of 12″.TOP PE • 12” FRAME OPENING HEIGHT 12” FRAME OPENING HEIGHT 12” FRAME OPENING HEIGHT 9” 9” 9” 21” 24” 27” 37 1/4” MAX CUTOUT 25 1/4” X 52 1/4” (SHADED) 37 1/4” MAX CUTOUT 28 1/4” X 52 1/4” (SHADED) 37 1/4” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278424DD OCD308424DD OCD338424DD MAX CUTOUT 31 1/4” X 52 1/4” (SHADED) Effective March 17. DEEP DRAWER.3 OCD338424DD 45.2 • • • • Full overlay styles feature concealed face mount hinges. Oven install kit will not be included when depth is modified. • For built-in appliance support.7 OCD308724DD 42. DEEP DRAWER.Model DOUBLE OVEN CABINET.8 • • • • Full overlay styles feature concealed face mount hinges. 24″ DEEP 27”.TOP PE • 15” FRAME OPENING HEIGHT 9” 37 1/4” 9” 15” FRAME OPENING HEIGHT 9” 21” TALL CABINETS DRWTK Decorative Door Options Construction Upgrades APC CND 9” 24” MAX CUTOUT 25 1/4” X 52 1/4” (SHADED) 37 1/4” 9” 15” FRAME OPENING HEIGHT 27” MAX CUTOUT 28 1/4” X 52 1/4” (SHADED) MAX CUTOUT 31 1/4” X 52 1/4” (SHADED) 37 1/4” 9” 9 1/4” 9 1/4” 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278724DD OCD308724DD OCD338724DD Effective March 17. or 33” Cubic Feet OCD278724DD 38. • Depth can be reduced to a minimum of 12″. 87” 282 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X ET • DRT • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP VTK • • • • FFDL FFDR CG. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. All cabinets have 3″ stiles on frame. 87″ TALL. Oven install kit will not be included when depth is modified. 30”.8 OCD338724DD 46. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 2014 . All top and bottom cross rails are 1 1/2″ wide. Heat shields are sold separately as an accessory. 4 • • • • Full overlay styles feature concealed face mount hinges. • For built-in appliance support. All cabinets have 3″ stiles on frame. All top and bottom cross rails are 1 1/2″ wide. Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND 283 CG. or 33” Cubic Feet OCD279024DD 40. DEEP DRAWER. 30”.2 OCD339024DD 48.TOP PE • 18” FRAME OPENING HEIGHT 9” 21” 37 1/4” 18” FRAME OPENING HEIGHT 9” MAX CUTOUT 25 1/4” X 52 1/4” (SHADED) 24” 37 1/4” 18” FRAME OPENING HEIGHT 9” MAX CUTOUT 28 1/4” X 52 1/4” (SHADED) 27” MAX CUTOUT 31 1/4” X 52 1/4” SHADED 37 1/4” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD279024DD OCD309024DD OCD339024DD Effective March 17.0 OCD309024DD 44.Model DOUBLE OVEN CABINET. 90″ TALL. • Depth can be reduced to a minimum of 12″. Heat shields are sold separately as an accessory. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 24″ DEEP 27”. Oven install kit will not be included when depth is modified. 2014 TALL CABINETS 90” . but packaged separately. All top and bottom cross rails are 1 1/2″ wide.7 OCD339324DD 50. Depth can be reduced to a minimum of 12″. Oven install kit will not be included when depth is modified. Heat shields are sold separately as an accessory. One full depth adjustable shelf included. 24″ DEEP 27”. or 33” • • • • • 93” • • • 284 24” 3” Stile 3” Stile Cubic Feet OCD279324DD 41. 30”. 2014 .TOP PE • 20 1/2” FRAME OPENING HEIGHT 9 TALL CABINETS DRWTK • ID Construction Upgrades APC CND 21” 20 1/2” FRAME OPENING HEIGHT 9 9 MAX CUTOUT 25 1/4” X 52 1/4” (SHADED) 24” 20 1/2” FRAME OPENING HEIGHT MAX CUTOUT 28 1/4” X 52 1/4” (SHADED) MAX CUTOUT 31 1/4” X 52 1/4” (SHADED) 27” 37 3/4” 37 3/4” 37 3/4” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” Pedestal Pedestal Pedestal OCD279324DD OCD309324DD OCD339324DD Effective March 17. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.3 OCD309324DD 45. For built-in appliance support. Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • • 3/4X • ET DRT MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options CG. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 93″ TALL. or can be centered. All cabinets have 3″ stiles on frame. DEEP DRAWER.0 Full overlay styles feature concealed face mount hinges. Pedestal must be covered with toeboard material. Separate pedestal base included but shipped separately on 93″ tall.Model DOUBLE OVEN CABINET. Oven install kit will not be included when depth is modified. 2014 TALL CABINETS 3” Stile 3” Stile . All cabinets have 3″ stiles on frame.Model DOUBLE OVEN CABINET.1 OCD339624DD 51. Pedestal must be covered with toeboard material. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. DEEP DRAWER. 30”. Heat shields are sold separately as an accessory. All top and bottom cross rails are 1 1/2″ wide. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). but packaged separately.6 Full overlay styles feature concealed face mount hinges.6 OCD309624DD 47. Separate pedestal base included but shipped separately on 96″ tall. 96″ TALL.TOP PE • 24 1/2” FRAME OPENING HEIGHT 24 1/2” FRAME OPENING HEIGHT 24 1/2” FRAME OPENING HEIGHT 9” 9” 9” 21” 24” 27” 36 3/4” 9” MAX CUTOUT 25 1/4” X 51 3/4” (SHADED) 36 3/4” 9” MAX CUTOUT 28 1/4” X 51 3/4” (SHADED) MAX CUTOUT 31 1/4” X 51 3/4” (SHADED) 36 3/4” 9” 9 1/4” 9 1/4” 9 1/4” Pedestal Pedestal Pedestal OCD279624DD OCD309624DD OCD339624DD Effective March 17. 24″ DEEP 27”. or can be centered. or 33” • • • • 96” • • • • Cubic Feet OCD279624DD 42. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. One full depth adjustable shelf included. 285 Custom Modifications 24” AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • • 3/4X • ET DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades APC CND CG. Depth can be reduced to a minimum of 12″. For built-in appliance support. Oven install kit will not be included when depth is modified.Model DOUBLE OVEN CABINET. 84″ TALL. All cabinets have 3″ stiles on frame. For depths of 6″-8″. 2014 .3 OCD338424WD 45. 84” 286 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • 3/4X ET • DRT EXB EXL EXR FB • • • • RT TD TKP VTK • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options CG. 30”. WARMING DRAWER. cabinet will not include toekick/pedestal. • Depth can be reduced to a minimum of 6″.2 • • • • Full overlay styles feature face mount hinges. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Heat shields are sold separately as an accessory.TOP PE • 12” FRAME OPENING HEIGHT 9” 12” FRAME OPENING HEIGHT 12” FRAME OPENING HEIGHT 9” 21” 9” 24” MAX CUTOUT* 25 1/4” X 52 1/4” (SHADED) TALL CABINETS DRWTK • Construction Upgrades APC CND 37 1/4” 27” MAX CUTOUT* 28 1/4” X 52 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 52 1/4” (SHADED) 37 1/4” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 9 1/4” 37 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278424WD OCD308424WD OCD338424WD *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. All top and bottom cross rails are 1 1/2″ wide. or 33” Cubic Feet OCD278424WD 37. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 24″ DEEP 27”.4 OCD308424WD 41. • For built-in appliance support. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Oven install kit will not be included when depth is modified. 87″ TALL.8 • • • • Full overlay styles feature face mount hinges.Model DOUBLE OVEN CABINET. 2014 TALL CABINETS 87” . 30”.TOP PE • 15” FRAME OPENING HEIGHT 9” 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 9” 21” 9” 24” MAX CUTOUT* 25 1/4” X 52 1/4” (SHADED) 37 1/4” 27” MAX CUTOUT* 28 1/4” X 52 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 52 1/4” (SHADED) 37 1/4” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 9 1/4” 37 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278724WD OCD308724WD OCD338724WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. All cabinets have 3″ stiles on frame. Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND 287 CG. WARMING DRAWER. All top and bottom cross rails are 1 1/2″ wide. • Depth can be reduced to a minimum of 6″. • For built-in appliance support. or 33” Cubic Feet OCD278724WD 38.7 OCD308724WD 42. 24″ DEEP 27”. cabinet will not include toekick/pedestal. Heat shields are sold separately as an accessory. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).8 OCD338724WD 46. For depths of 6″-8″. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). or 33” Cubic Feet OCD279024WD 40. WARMING DRAWER.Model DOUBLE OVEN CABINET. 90” 288 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • 3/4X ET • DRT EXB EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options CG. cabinet will not include toekick/pedestal. For depths of 6″-8″. 30”. Oven install kit will not be included when depth is modified.TOP PE • 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 9” 9” 9” 24” 21” TALL CABINETS DRWTK • Construction Upgrades APC CND MAX CUTOUT* 25 1/4” X 52 1/4” (SHADED) 27” MAX CUTOUT* 28 1/4” X 52 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 52 1/4” (SHADED) 37 1/4” 37 1/4” 37 1/4” 9” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD279024WD OCD309024WD OCD339024WD *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. 2014 . • Depth can be reduced to a minimum of 6″.0 OCD309024WD 44. All top and bottom cross rails are 1 1/2″ wide.2 OCD339024WD 48. Heat shields are sold separately as an accessory. All cabinets have 3″ stiles on frame.4 • • • • Full overlay styles feature face mount hinges. 90″ TALL. • For built-in appliance support. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 24″ DEEP 27”. 3 OCD309324WD 45. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).7 OCD339324WD 50. All cabinets have 3″ stiles on frame. or can be centered. • Depth can be reduced to a minimum of 6″. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 93″ TALL. One adjustable shelf included but packaged separately. Heat shields are sold separately as an accessory. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. Oven install kit will not be included when depth is modified. or 33” Cubic Feet OCD279324WD 41.0 • • • • • Full overlay styles feature face mount hinges. • For built-in appliance support.Model DOUBLE OVEN CABINET. All top and bottom cross rails are 1 1/2″ wide. Pedestal must be covered with toeboard material. 30”. 24″ DEEP 27”. 2014 TALL CABINETS 93” . cabinet will not include toekick/pedestal. 24” 3” Stile 3” Stile 289 Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO ID MIP RD • • • ET • DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades 3/4X DRT • • APC CND CG. For depths of 6″-8″. WARMING DRAWER. • Separate pedestal base included but shipped separately on 93″ tall.TOP PE • 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 9” 9” 9” 24” 21” MAX CUTOUT* 25 1/4” X 52 1/4” (SHADED) 27” MAX CUTOUT* 28 1/4” X 52 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 52 1/4” (SHADED) 37 3/4” 37 3/4” 37 3/4” 9” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal OCD279324WD 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal Pedestal OCD309324WD OCD339324WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. All cabinets have 3″ stiles on frame. For depths of 6″-8″. 24″ DEEP 27”. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.Model DOUBLE OVEN CABINET.TOP PE • 24 1/2” FRAME OPENING HEIGHT TALL CABINETS DRWTK Decorative Door Options Construction Upgrades 3/4X DRT • • APC CND 9” 24 1/2” FRAME OPENING HEIGHT 24 1/2” FRAME OPENING HEIGHT 9” 21” 9” 24” MAX CUTOUT* 25 1/4” X 51 3/4” (SHADED) 36 3/4” 27” MAX CUTOUT* 28 1/4” X 51 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 51 3/4” (SHADED) 36 3/4” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 9 1/4” 36 3/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal Pedestal Pedestal OCD279624WD OCD309624WD OCD339624WD *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. One adjustable shelf included but packaged separately. Oven install kit will not be included when depth is modified. or 33” Cubic Feet OCD279624WD 42. • For built-in appliance support. cabinet will not include toekick/pedestal. or can be centered. 30”. 2014 .6 • • • • • Full overlay styles feature face mount hinges. Heat shields are sold separately as an accessory. Pedestal must be covered with toeboard material. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.6 OCD309624WD 47. 96″ TALL. All top and bottom cross rails are 1 1/2″ wide. • Separate pedestal base included but shipped separately on 96″ tall.1 OCD339624WD 51. WARMING DRAWER. 96” 290 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO ID MIP RD • • • ET • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • CG. • Depth can be reduced to a minimum of 6″. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). TOP • • 9” FRAME OPENING HEIGHT 9” 9” FRAME OPENING HEIGHT 9” FRAME OPENING HEIGHT 9” 21” 9” 24” MAX CUTOUT* 25 1/4” X 55 1/4” (SHADED) 40 1/4” 27” MAX CUTOUT* 28 1/4” X 55 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 55 1/4” (SHADED) 40 1/4” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” FFDL FFDR Decorative Door Options Construction Upgrades APC CND 9” 9 1/4” 40 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278424WDE OCD308424WDE OCD338424WDE MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). WARMING DRAWER with EXTENDED OPENING.3 OCD338424WDE 45. All top and bottom cross rails are 1 1/2″ wide. 27”. Heat shields are sold separately as an accessory. Oven install kit will not be included when depth is modified. • For built-in appliance support. 24″ DEEP Cubic Feet OCD278424WDE 37. cabinet will not include toekick/pedestal. For depths of 6″-8″. 2014 TALL CABINETS 24” . 30”. All cabinets have 3″ stiles on frame. 84″ TALL.2 • • • • • Full overlay styles feature face mount hinges. or 33” 84” 291 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • PE CG. Standard interior (matching interior not required).Model NEW DOUBLE OVEN CABINET. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. • Depth can be reduced to a minimum of 6″.4 OCD308424WDE 41. 30”.Model NEW DOUBLE OVEN CABINET. • Depth can be reduced to a minimum of 6″. All cabinets have 3″ stiles on frame.8 OCD338724WDE 46. • For built-in appliance support.8 • • • • • Full overlay styles feature face mount hinges. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 2014 . 24″ DEEP Cubic Feet OCD278724WDE 38. Oven install kit will not be included when depth is modified. Heat shields are sold separately as an accessory. WARMING DRAWER with EXTENDED OPENING. For depths of 6″-8″. 87″ TALL. or 33” 87” 292 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • • 3/4X ET • DRT EXB EXL EXR FB • • • • RT TD TKP VTK • • RECTKALL RECTKL RECTKBK RECTKR • CG.TOP • • 9” 12” FRAME OPENING HEIGHT 12” FRAME OPENING HEIGHT 9” 21” 9” 24” MAX CUTOUT* 25 1/4” X 55 1/4” (SHADED) 40 1/4” 27” MAX CUTOUT* 28 1/4” X 55 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 55 1/4” (SHADED) 40 1/4” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” FFDL FFDR Decorative Door Options PE 12” FRAME OPENING HEIGHT TALL CABINETS DRWTK • Construction Upgrades APC CND 9” 9 1/4” 40 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD278724WDE OCD308724WDE OCD338724WDE *Minimum rail height between oven and warming drawer is 11/2" Effective March 17.7 OCD308724WDE 42. Standard interior (matching interior not required). cabinet will not include toekick/pedestal. 27”. All top and bottom cross rails are 1 1/2″ wide. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. or 33” 90” 293 Custom Modifications 24” 3” Stile 3” Stile CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • PE CG. cabinet will not include toekick/pedestal. Standard interior (matching interior not required).Model NEW DOUBLE OVEN CABINET. Heat shields are sold separately as an accessory.TOP • • 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 9” 9” 9” 24” 21” MAX CUTOUT* 25 1/4” X 55 1/4” (SHADED) 27” MAX CUTOUT* 28 1/4” X 55 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 55 1/4” (SHADED) 40 1/4” 40 1/4” 40 1/4” 9” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” FFDL FFDR Decorative Door Options Construction Upgrades APC CND 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OCD279024WDE OCD309024WDE OCD339024WDE MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. • For built-in appliance support. 90″ TALL. All cabinets have 3″ stiles on frame. WARMING DRAWER with EXTENDED OPENING. 30”.4 • • • • • Full overlay styles feature face mount hinges. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). • Depth can be reduced to a minimum of 6″. 24″ DEEP Cubic Feet OCD279024WDE 40. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. For depths of 6″-8″. 2014 TALL CABINETS AUTHL AUTHR . Oven install kit will not be included when depth is modified.2 OCD339024WDE 48. 27”. All top and bottom cross rails are 1 1/2″ wide.0 OCD309024WDE 44. Oven install kit will not be included when depth is modified.Model NEW DOUBLE OVEN CABINET. Standard interior (matching interior not required). All top and bottom cross rails are 1 1/2″ wide. • For built-in appliance support. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. All cabinets have 3″ stiles on frame. For depths of 6″-8″.7 OCD339324WDE 50. 30”. 2014 . Heat shields are sold separately as an accessory. • Separate pedestal base included but shipped separately on 93″ tall. or can be centered.3 OCD309324WDE 45. 24″ DEEP OCD279324WDE 41. WARMING DRAWER with EXTENDED OPENING. Pedestal must be covered with toeboard material.0 • • • • • Full overlay styles feature face mount hinges. • Depth can be reduced to a minimum of 6″. 27”. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). or 33” 294 Cubic Feet 93” Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO CCO • • FPEB FTK FTKAV FTKFV CFNTO CFRMO • • 3/4X ET • DRT ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP CG. cabinet will not include toekick/pedestal. 93″ TALL.TOP • • 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 9” 9” 24” 21” MAX CUTOUT* 25 1/4” X 55 1/4” (SHADED) 27” MAX CUTOUT* 28 1/4” X 55 1/4” (SHADED) MAX CUTOUT* 31 1/4” X 55 1/4” (SHADED) 40 1/4” 40 1/4” 40 1/4” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal OCD279324WDE VTK Decorative Door Options PE 9” 9” FFDL FFDR • 18” FRAME OPENING HEIGHT TALL CABINETS DRWTK • Construction Upgrades APC CND 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal Pedestal OCD309324WDE OCD339324WDE *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. All cabinets have 3″ stiles on frame.Model NEW DOUBLE OVEN CABINET. Oven install kit will not be included when depth is modified. All top and bottom cross rails are 1 1/2″ wide. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. Pedestal must be covered with toeboard material. 96″ TALL. cabinet will not include toekick/pedestal. Heat shields are sold separately as an accessory.6 OCD309624WDE 47. or 33” 96” 295 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO CCO • • FPEB FTK FTKAV FTKFV CFNTO CFRMO • • 3/4X ET • DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP PE CG. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). • For built-in appliance support. 30”.TOP • • 9” 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 9” 21” 9” 24” MAX CUTOUT* 25 1/4” X 54 3/4” (SHADED) 39 3/4” 27” MAX CUTOUT* 28 1/4” X 54 3/4” (SHADED) MAX CUTOUT* 31 1/4” X 54 3/4” (SHADED) 39 3/4” 9” VTK • 20 1/2” FRAME OPENING HEIGHT MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” FFDL FFDR Decorative Door Options Construction Upgrades APC CND 9” 9 1/4” 39 3/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal Pedestal Pedestal OCD279624WDE OCD309624WDE OCD339624WDE MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. WARMING DRAWER with EXTENDED OPENING. • Separate pedestal base included but shipped separately on 96″ tall. 27”.6 • • • • • • Full overlay styles feature face mount hinges. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 24″ DEEP Cubic Feet OCD279624WDE 42. One adjustable shelf included but packaged separately.1 OCD339624WDE 51. Standard interior (matching interior not required). or can be centered. • Depth can be reduced to a minimum of 6″. 2014 TALL CABINETS 24” . For depths of 6″-8″. 7 MCC309624 47.Model MICROWAVE COOKING CENTER. • All toekick areas are 4 1/2″ high. • Top drawer with cutlery insert will be slab for all 5 piece drawer and Drawer Front Raised applications.1 • Microwave opening is 27″ wide x 18″ high. or can be centered. cutlery insert. 24″ DEEP 30” 84” 87” or 90” Cubic Feet MCC308424 41.TOP PE • MCC309324 MCC309624 27” 18” MAX CUTOUT 28 1/4” X 19 1/2” (SHADED) 27” 18” EQUAL TO BCC30 MAX CUTOUT 28 1/4” X 19 1/2” (SHADED) 27” 18” EQUAL TO BCC30 MAX CUTOUT 28 1/4” X 19 1/2” (SHADED) 39” FRAME OPENING HEIGHT 36” FRAME OPENING HEIGHT 33” FRAME OPENING HEIGHT 30” FRAME OPENING HEIGHT 27” FRAME OPENING HEIGHT 27” 18” MAX CUTOUT 28 1/4” X 19 1/2” (SHADED) 27” 18” EQUAL TO BCC30 EQUAL TO BCC30 MAX CUTOUT 28 1/4” X 19 1/2” (SHADED) EQUAL TO BCC30 Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Pedestal Pedestal MCC308424 MCC308724 MCC309024 MCC309324 MCC309624 Effective March 17. 84″. 93″. • All cabinets have 1 1/2″ stiles on frame. • Separate pedestal base included but shipped separately on 93″ and 96″ tall. bread box lid and 1 roll tray. See Accessories. • All top and bottom rails are 1 1/2″ wide. all shelves are included but packaged separately.2 MCC309324 45. or Parts section for more details on Cutlery Inserts and Bread Box Lids. • Bread board is 21/32″ thick. Maximum cut out is 28 1/4″ wide x 19 1/2″ high. 296 24” MCC308424 MCC308724 MCC309024 Custom Modifications 30” 93” or 96” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • •* •* CCO CFNTO CFRMO • ID MIP CND • RD DRT DRWTK EXB EXL EXR FB • •* • • • RT TD TKP VTK •* •* RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR *Not available on 93″ and 96″ tall Decorative Door Options Construction Upgrades TALL CABINETS 24” APC 3/4X • • ET CG. 2014 . • Includes bread board. 93″ and 96″ units have 3 adjustable shelves. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. • For use with built-in microwave only. or 96″ TALL.8 MCC309024 44.3 MCC308724 42. Pedestal must be covered with toeboard material. 87″ and 90″ units have 2 adjustable shelves. 87″. 90″. • 84″. TOP PE • 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 9” 9” 18” 21” MAX CUTOUT 25 1/4” X 39” (SHADED) 18” 24” MAX CUTOUT 28 1/4” X 39” (SHADED) 18” 27” 9” 9” 9” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC278424 OMC308424 OMC338424 MAX CUTOUT 31 1/4” X 39” (SHADED) 46 1/2” Effective March 17. Oven install kit will not be included when depth is modified.2 • • • • • • Designed for use with separate built-in microwave above. For built-in double ovens. All toekick areas are 4 1/2″ high. 24″ DEEP Cubic Feet OMC278424 37. 24” 297 Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND CG. built-in oven below. see pages 276-290.Model OVEN MICROWAVE CABINET. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. • Depth can be reduced to a minimum of 12″. All cabinets have 3″ stiles on frame. 2014 TALL CABINETS 84” . Heat shields are sold separately as an accessory. All top and bottom cross rails are 1 1/2″ wide. • For built-in appliance support.3 OMC338424 45. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).4 OMC308424 41. 84″ TALL. Full overlay styles feature face mount hinge. For built-in double ovens. • For built-in appliance support. built-in oven below. All top and bottom cross rails are 1 1/2″ wide. All toekick areas are 4 1/2″ high.TOP PE • 18” FRAME OPENING HEIGHT TALL CABINETS DRWTK Decorative Door Options Construction Upgrades APC CND 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 9” 9” 18” 21” MAX CUTOUT 25 1/4” X 39” (SHADED) 18” 24” MAX CUTOUT 28 1/4” X 39” (SHADED) 18” 27” 9” 9” 9” 4 1/2” 4 1/2” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC278724 OMC308724 OMC338724 MAX CUTOUT 31 1/4” X 39” (SHADED) 46 1/2” Effective March 17. Oven install kit will not be included when depth is modified. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.Model OVEN MICROWAVE CABINET. • Depth can be reduced to a minimum of 12″. see pages 276-290. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 24″ DEEP 27”. All cabinets have 3″ stiles on frame. 87” 298 Custom Modifications 24” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR CG. Full overlay styles feature face mount hinge. 87″ TALL. 2014 .8 OMC338724 46. 30”. or 33” Cubic Feet OMC278724 38.8 • • • • • • Designed for use with separate built-in microwave above.7 OMC308724 42. Heat shields are sold separately as an accessory. or 33” Cubic Feet OMC279024 40. All cabinets have 3″ stiles on frame. see pages 276-290. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.0 OMC309024 44. Oven install kit will not be included when depth is modified. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Heat shields are sold separately as an accessory.4 • • • • • • • Designed for use with separate built-in microwave above. 24″ DEEP 27”. 2014 TALL CABINETS 24” . For built-in double ovens. • For built-in appliance support.Model OVEN MICROWAVE CABINET. 90″ TALL. 90” 299 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X • • ET DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • CG. One adjustable shelf included but packaged separately.TOP PE • 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 3 1/2” 3 1/2” 21” 20 1/2” FRAME OPENING HEIGHT 3 1/2” 24” 27” 18” 18” 18” 9” 9” 9” 21” 46 1/2” FFDL FFDR Decorative Door Options Construction Upgrades APC CND 18” 9” 4 1/2” MAX CUTOUT 25 1/4” X 39” (SHADED) 24” 461/2” 18” 9” 4 1/2” MAX CUTOUT 28 1/4” X 39” (SHADED) 27” 46 1/2” 18” MAX CUTOUT 31 1/4” X 39” (SHADED) 9” 4 1/2” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC279024 OMC309024 OMC339024 Effective March 17. Full overlay styles feature face mount hinge. 30”.2 OMC339024 48. All toekick areas are 4 1/2″ high. All top and bottom cross rails are 1 1/2″ wide. • Depth can be reduced to a minimum of 12″. built-in oven below. • For built-in appliance support. All cabinets have 3″ stiles on frame. • Depth can be reduced to a minimum of 12″.7 OMC339324 50. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. Pedestal must be covered with toeboard material. 2014 . 24″ DEEP 27”.TOP PE • 24” FRAME OPENING HEIGHT 24” FRAME OPENING HEIGHT 3” 3” 21” 24” FRAME OPENING HEIGHT 3” 24” 27” 18” 18” 18” 9” 9” 9” 21” 46 1/2” EXB Decorative Door Options Construction Upgrades APC CND 18” 9” 4 1/2” MAX CUTOUT 25 1/4” X 39” (SHADED) 24” 46 1/2” 18” 9” 4 1/2” MAX CUTOUT 28 1/4” X 39” (SHADED) 27” 46 1/2” 18” MAX CUTOUT 31 1/4” X 39” (SHADED) 9” 4 1/2” Pedestal Pedestal Pedestal OMC279324 OMC309324 OMC339324 Effective March 17. 93″ TALL. All top and bottom cross rails are 1 1/2″ wide.3 OMC309324 45. • Separate pedestal base included but shipped separately on 93″ tall. Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • CFNTO CFRMO • 3/4X • • ET DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR TALL CABINETS EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • CG. or can be centered. built-in oven below. 30”. Oven install kit will not be included when depth is modified. One adjustable shelf included but packaged separately. Heat shields are sold separately as an accessory.0 • • • • • • • 93” 300 24” 3” Stile 3” Stile Designed for use with separate built-in microwave above. For built-in double ovens. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).Model OVEN MICROWAVE CABINET. Full overlay styles feature face mount hinge shelf. see pages 276-290. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. or 33” Cubic Feet OMC279324 41. All toekick areas are 4 1/2″ high. 2014 . All top and bottom cross rails are 1 1/2″ wide. see pages 276-290. or 33” Cubic Feet OMC279624 42.Model OVEN MICROWAVE CABINET. All toekick areas are 4 1/2″ high. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. • For built-in appliance support. For built-in double ovens. • Separate pedestal base included but shipped separately on 96″ tall.1 OMC339624 51. Two adjustable shelves included but packaged separately. 24″ DEEP 27”. • Depth can be reduced to a minimum of 12″.TOP PE • 27” FRAME OPENING HEIGHT 27” FRAME OPENING HEIGHT 27” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 9” 9” 18” 21” 9” MAX CUTOUT 25 1/4” X 39” (SHADED) 18” 24” 9” MAX CUTOUT 28 1/4” X 39” (SHADED) 18” 27” MAX CUTOUT 30 3/4” X 39” (SHADED) TALL CABINETS 96” 46 1/2” 9” 4 1/2” 4 1/2” 4 1/2” Pedestal Pedestal Pedestal OMC279624 OMC309624 OMC339624 Effective March 17. or can be centered. built-in oven below. Oven install kit will not be included when depth is modified. Full overlay styles feature face mount hinge. All cabinets have 3″ stiles on frame. 96″ TALL.6 OMC309624 47. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.6 • • • • • • • Designed for use with separate built-in microwave above. 30”. Pedestal must be covered with toeboard material. Heat shields are sold separately as an accessory. 24” 3” Stile 3” Stile 301 Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • CFNTO CFRMO • 3/4X • • ET DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades APC CND CG. built-in oven below.TOP PE • 12” FRAME OPENING HEIGHT TALL CABINETS FFDL FFDR Decorative Door Options Construction Upgrades APC CND 12” FRAME OPENING HEIGHT 12” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 9” 9” 16 1/4” 21” 9” MAX CUTOUT 25 1/4” X 31 1/4” (SHADED) 16 1/4” 24” 9” MAX CUTOUT 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” 9” 9 1/4” 9 1/4” 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC278424DD OMC308424DD OMC338424DD MAX CUTOUT 31 1/4” X 31 1/4” (SHADED) 49 1/2” Effective March 17. • For built-in appliance support. • Depth can be reduced to a minimum of 12″. 30”. Full overlay styles feature concealed face mount hinge shelf. DEEP DRAWER. For built-in double ovens. see pages 276-290. 84” 302 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • CG. All top and bottom cross rails are 1 1/2″ wide.2 • • • • • • Designed for use with separate built-in microwave above. 2014 .4 OMC308424DD 41. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).3 OMC338424DD 45. Oven install kit will not be included when depth is modified. Heat shields are sold separately as an accessory. All cabinets have 3″ stiles on frame.Model OVEN MICROWAVE CABINET. All toekick areas are 4 1/2″ high. 84″ TALL. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. or 33” Cubic Feet OMC278424DD 37. 24″ DEEP 27”. 87″ TALL. 24″ DEEP 27”. 87” 303 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND CG. Heat shields are sold separately as an accessory. see pages 276-290. For built-in double ovens. 30”. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).7 OMC308724DD 42. Full overlay styles feature concealed face mount hinge shelf.8 • • • • • • Designed for use with separate built-in microwave above. • For built-in appliance support. • Depth can be reduced to a minimum of 12″. 2014 TALL CABINETS 24” . Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. All top and bottom cross rails are 1 1/2″ wide.8 OMC338724DD 46. DEEP DRAWER.Model OVEN MICROWAVE CABINET. All cabinets have 3″ stiles on frame. built-in oven below. or 33” Cubic Feet OMC278724DD 38. Oven install kit will not be included when depth is modified. All toekick areas are 4 1/2″ high.TOP PE • 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 16 1/4” 21” 9” MAX CUTOUT 25 1/4” X 31 1/4” (SHADED) 16 1/4” 24” 9” MAX CUTOUT 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC278724DD OMC308724DD OMC338724DD MAX CUTOUT 31 1/4” X 31 1/4” (SHADED) 49 1/2” Effective March 17. DEEP DRAWER. 2014 . 90” 304 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • CCO CFNTO CFRMO • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • CG. Full overlay styles feature concealed face mount hinge shelf. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Heat shields are sold separately as an accessory.Model OVEN MICROWAVE CABINET. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. For built-in double ovens. • For built-in appliance support. see pages 276-290. or 33” Cubic Feet OMC279024DD 40.TOP PE • TALL CABINETS 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 21” 49 1/2” FFDL FFDR Decorative Door Options Construction Upgrades APC CND 16 1/4” 9” 9” MAX CUTOUT 25 1/4” X 31 1/4” (SHADED) 49 1/2” 24” 16 1/4” MAX CUTOUT 28 1/4” X 31 1/4” (SHADED) 49 1/2” 27” 16 1/4” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC279024DD OMC309024DD OMC339024DD MAX CUTOUT 31 1/4” X 31 1/4” (SHADED) Effective March 17. 30”. All cabinets have 3″ stiles on frame. Oven install kit will not be included when depth is modified.0 OMC309024DD 44. 24″ DEEP 27”. All toekick areas are 4 1/2″ high. • Depth can be reduced to a minimum of 12″.4 • • • • • • Designed for use with separate built-in microwave above. All top and bottom cross rails are 1 1/2″ wide. 90″ TALL.2 OMC339024DD 48. built-in oven below. One full depth adjustable shelf included. 93″ TALL. or can be centered. Pedestal must be covered with toeboard material. Oven install kit will not be included when depth is modified. 30”. Separate pedestal base included but shipped separately on 93″ tall. but packaged separately. All cabinets have 3″ stiles on frame. Full overlay styles feature concealed face mount hinge shelf. Depth can be reduced to a minimum of 12″.TOP • 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 3 1/2” 3 1/2” 3 1/2” 18” 18” 18” 21” 24” 27” 9” 21” 49 1/2” EXB Decorative Door Options Construction Upgrades APC CND 16 1/4” 9” 9” 9” MAX CUTOUT 25 1/4” X 31 1/4” (SHADED) 49 1/2” 24” 16 1/4” 9” MAX CUTOUT 28 1/4” X 31 1/4” (SHADED) 49 1/2” 27” 16 1/4” MAX CUTOUT 31 1/4” X 31 1/4” (SHADED) 9” 9 1/4” 9 1/4” 9 1/4” Pedestal Pedestal Pedestal OMC279324DD OMC309324DD OMC339324DD Effective March 17.0 Designed for use with separate built-in microwave above. see pages 276-290. All toekick areas are 4 1/2″ high.7 OMC339324DD 50. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. 305 Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • CFNTO CFRMO • 3/4X ET • DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXL EXR FB • • • RT TD TKP • PE FFDL FFDR VTK • CG. 24″ DEEP 27”. 2014 TALL CABINETS 93” Cubic Feet . For built-in double ovens. DEEP DRAWER.3 OMC309324DD 45. or 33” • • • • • • • • • • 24” 3” Stile 3” Stile OMC279324DD 41. All top and bottom cross rails are 1 1/2″ wide. For built-in appliance support. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance.Model OVEN MICROWAVE CABINET. built-in oven below. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). Heat shields are sold separately as an accessory. 24″ DEEP 27”. All toekick areas are 4 1/2″ high. Full overlay styles feature concealed face mount hinge shelf. Custom Modifications AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • CFNTO CFRMO • 3/4X ET TALL CABINETS • DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades APC CND CG.TOP PE • 24 1/2” FRAME OPENING HEIGHT 24 1/2” FRAME OPENING HEIGHT 24 1/2” FRAME OPENING HEIGHT 2 1/2” 2 1/2” 2 1/2” 18” 18” 18” 21” 24” 27” 9” 9” 9” 16 1/4” 21” MAX CUTOUT 25 1/4” X 31 1/4” (SHADED) 16 1/4” 24” MAX CUTOUT 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” 9” 9” 9” 9 1/4” 9 1/4” 9 1/4” Pedestal Pedestal Pedestal OMC279624DD OMC309624DD OMC339624DD MAX CUTOUT 31 1/4” X 31 1/4” (SHADED) 49 1/2” Effective March 17. All top and bottom cross rails are 1 1/2″ wide.6 OMC309624DD 47. built-in oven below. see pages 276-290. 30”.1 OMC339624DD 51. For built-in double ovens. Pedestal must be covered with toeboard material.6 Designed for use with separate built-in microwave above. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. DEEP DRAWER. For built-in appliance support. 96″ TALL. Depth can be reduced to a minimum of 12″. Heat shields are sold separately as an accessory.Model OVEN MICROWAVE CABINET. or 33” • • • • • • 96” • 306 • • • 24” 3” Stile 3” Stile Cubic Feet OMC279624DD 42. but packaged separately. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. Separate pedestal base included but shipped separately on 96″ tall. One full depth adjustable shelf included. 2014 . OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). All cabinets have 3″ stiles on frame. or can be centered. Oven install kit will not be included when depth is modified. 2014 TALL CABINETS 24” .4 OMC308424WD 41. • For built-in appliance support. Full overlay styles feature face mount hinge. All top and bottom cross rails are 1 1/2″ wide. Oven install kit will not be included when depth is modified. Heat shields are sold separately as an accessory. For built-in double ovens. All toekick areas are 4 1/2″ high.Model OVEN MICROWAVE CABINET. 30”. WARMING DRAWER. 84” 307 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • • 3/4X ET DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options CG. 24″ DEEP 27”.2 • • • • • • Designed for use with separate built-in microwave above.3 OMC338424WD 45.TOP PE • DRT • Construction Upgrades APC CND • 12” FRAME OPENING HEIGHT 12” FRAME OPENING HEIGHT 12” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 9” 9” MAX CUTOUT* 25 1/4” X 31 1/4” (SHADED) 16 1/4” 21” 16 1/4” 24” MAX CUTOUT* 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” MAX CUTOUT* 31 1/4” X 31 1/4” (SHADED) 49 1/2” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC278424WD OMC308424WD OMC338424WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. cabinet will not include toekick/pedestal. see pages 276-290. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 84″ TALL. All cabinets have 3″ stiles on frame. • Depth can be reduced to a minimum of 6″. For depths of 6″-8″. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. built-in oven below. or 33” Cubic Feet OMC278424WD 37. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). All cabinets have 3″ stiles on frame. cabinet will not include toekick/pedestal.8 OMC338724WD 46. 24″ DEEP 27”. For depths of 6″-8″.7 OMC308724WD 42. All toekick areas are 4 1/2″ high. 87″ TALL. 2014 . Full overlay styles feature face mount hinge.8 • • • • • • Designed for use with separate built-in microwave above. • Depth can be reduced to a minimum of 6″. 87” 308 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO CCO CFNTO CFRMO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • • 3/4X ET DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • RECTKALL RECTKL RECTKBK RECTKR • CG. Heat shields are sold separately as an accessory. built-in oven below. For built-in double ovens.Model OVEN MICROWAVE CABINET. All top and bottom cross rails are 1 1/2″ wide. or 33” Cubic Feet OMC278724WD 38. see pages 276-290. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. 30”. WARMING DRAWER. Oven install kit will not be included when depth is modified.TOP • 15” FRAME OPENING HEIGHT TALL CABINETS FFDL FFDR Decorative Door Options PE • DRT • Construction Upgrades APC CND 15” FRAME OPENING HEIGHT 15” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 9” 9” MAX CUTOUT* 25 1/4” X 31 1/4” (SHADED) 16 1/4” 21” 16 1/4” 24” MAX CUTOUT* 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” MAX CUTOUT* 31 1/4” X 31 1/4” (SHADED) 49 1/2” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC278724WD OMC308724WD OMC338724WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. • For built-in appliance support. 90” 309 Custom Modifications AUTHL AUTHR CCO • • FPEB FTK FTKAV FTKFV ID MIP RD • • • • • • 3” Stile 3” Stile CFNTO CFRMO • 3/4X ET • DRT DRWTK EXB EXL EXR FB • • • • RT TD TKP VTK • • • • RECTKALL RECTKL RECTKBK RECTKR • FFDL FFDR Decorative Door Options Construction Upgrades APC CND CG.Model OVEN MICROWAVE CABINET.4 • • • • • • Designed for use with separate built-in microwave above. Oven install kit will not be included when depth is modified.TOP PE • 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 18” FRAME OPENING HEIGHT 3” 3” 3” 18” 18” 18” 21” 24” 27” 9” 9” 9” MAX CUTOUT* 25 1/4” X 31 1/4” (SHADED) 16 1/4” 21” 16 1/4” 24” MAX CUTOUT* 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” MAX CUTOUT* 31 1/4” X 31 1/4” (SHADED) 49 1/2” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Toekick 4 1/2” Toekick 4 1/2” Toekick 4 1/2” OMC279024WD OMC309024WD OMC339024WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. Heat shields are sold separately as an accessory. 90″ TALL. built-in oven below. cabinet will not include toekick/pedestal. All toekick areas are 4 1/2″ high. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. WARMING DRAWER. All top and bottom cross rails are 1 1/2″ wide.2 OMC339024WD 48. For built-in double ovens. see pages 276-290. or 33” Cubic Feet OMC279024WD 40. 30”. • For built-in appliance support. • Depth can be reduced to a minimum of 6″. Full overlay styles feature face mount hinge. All cabinets have 3″ stiles on frame.0 OMC309024WD 44. 24″ DEEP 27”. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 2014 TALL CABINETS 24” CBO . For depths of 6″-8″. All toekick areas are 4 1/2″ high. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation.7 OMC339324WD 50.0 • • • • • • Designed for use with separate built-in microwave above. 24″ DEEP 27”. see pages 276-290. or can be centered. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. • For built-in appliance support. Pedestal must be covered with toeboard material. built-in oven below. 2014 . • Depth can be reduced to a minimum of 6″. Full overlay styles feature face mount hinge. or 33” Cubic Feet OMC279324WD 41.TOP PE • 20 1/2” FRAME OPENING HEIGHT TALL CABINETS EXB Decorative Door Options Construction Upgrades APC CND 20 1/2” FRAME OPENING HEIGHT 20 1/2” FRAME OPENING HEIGHT 3 1/2” 3 1/2” 3 1/2” 18” 18” 18” 21” 24” 27” 9” 9” 9” MAX CUTOUT* 25 1/4” X 31 1/4” (SHADED) 16 1/4” 21” 16 1/4” 24” MAX CUTOUT* 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” MAX CUTOUT* 31 1/4” X 31 1/4” (SHADED) 49 1/2” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal OMC279324WD 9” 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal Pedestal OMC309324WD OMC339324WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. Oven install kit will not be included when depth is modified. For built-in double ovens.3 OMC309324WD 45.Model OVEN MICROWAVE CABINET. For depths of 6″-8″. Heat shields are sold separately as an accessory. cabinet will not include toekick/pedestal. All top and bottom cross rails are 1 1/2″ wide. All cabinets have 3″ stiles on frame. 30”. • Separate pedestal base included but shipped separately on 93″ tall. WARMING DRAWER. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details). 93″ TALL. 93” 310 Custom Modifications 24” 3” Stile 3” Stile AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO • CFNTO CFRMO • 3/4X ET • DRT DRWTK • ID MIP RD • • • RECTKALL RECTKL RECTKBK RECTKR EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • CG. For built-in double ovens. Pedestal must be covered with toeboard material. • For built-in appliance support. or can be centered. 2014 TALL CABINETS 24” . built-in oven below. 24″ DEEP 27”. Pedestal is designed to create a Recessed Left or Right Toekick application during field installation. Be sure to confirm a heat shield is built into your appliance by the manufacturer or install the heat shield included with your appliance. For depths of 6″-8″. • Depth can be reduced to a minimum of 6″. • Separate pedestal base included but shipped separately on 96″ tall. OCINSTALLKIT is included in 24″ deep oven cabinets (see page 407 for details).TOP PE • 24 1/2” FRAME OPENING HEIGHT 24 1/2” FRAME OPENING HEIGHT 24 1/2” FRAME OPENING HEIGHT 2 1/2” 2 1/2” 2 1/2” 18” 18” 18” 21” 24” 27” 9” 9” 9” MAX CUTOUT* 25 1/4” X 31 1/4” (SHADED) 16 1/4” 21” 16 1/4” 24” MAX CUTOUT* 28 1/4” X 31 1/4” (SHADED) 16 1/4” 27” MAX CUTOUT* 31 1/4” X 31 1/4” (SHADED) 49 1/2” 9” MAX CUTOUT* 25 1/4” X 16 3/4” (SHADED) 9 1/4” 9” 9 1/4” 9” MAX CUTOUT* 28 1/4” X 16 3/4” (SHADED) 9 1/4” Pedestal Pedestal Pedestal OMC279624WD OMC309624WD OMC339624WD MAX CUTOUT* 31 1/4” X 16 3/4” (SHADED) *Minimum rail height between oven and warming drawer is 11/2" Effective March 17. 96” 311 Custom Modifications 3” Stile 3” Stile AUTHL AUTHR CBO • • • FTK FTKAV FTKFV FPEB CCO CFNTO CFRMO • MIP RD • • • ET • DRWTK RECTKALL RECTKL RECTKBK RECTKR EXB EXL EXR FB • • • RT TD TKP • FFDL FFDR VTK • Decorative Door Options Construction Upgrades 3/4X DRT • ID • APC CND CG. WARMING DRAWER. cabinet will not include toekick/pedestal.Model OVEN MICROWAVE CABINET. All top and bottom cross rails are 1 1/2″ wide. All cabinets have 3″ stiles on frame. All toekick areas are 4 1/2″ high. see pages 276-290. or 33” Cubic Feet OMC279624WD 42.6 • • • • • • • Designed for use with separate built-in microwave above. 30”. Full overlay styles feature face mount hinge.6 OMC309624WD 47.1 OMC339624WD 51. 96″ TALL. One adjustable shelf included but packaged separately. Heat shields are sold separately as an accessory. Oven install kit will not be included when depth is modified. To change the top rail valance. Arch Valance Top Rail. 312 CUSTOM MODIFICATIONS CONSTRUCTION UPGRADES Mod. specify one of the following modifications: Arch (TVRAV). Description Mod. specify one of the following modifications: Arch (TVRAV).3 W2430BC 6. 12″ DEEP • • • • 48” W1848BC 8. Custom Modifications 12” AUTHL ADDTK AUTHR • FFDL FFDR • FPEB CBO CCO CFNTO CFP STD FTK • CFRMO • FTKAV FTKFV ID MIP RD • STD • CND DRWTK EXB EXL EXR FB • • STD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK • Construction Upgrades APC 3/4X PE STD Effective March 17.Both Extended Stile . Face frame has a profiled inside edge. Furniture (TVRFV). Office and Furniture bases will have Square doors. Face frame has a profiled inside edge.5 W3630BC 10. 48″ HIGH.Left Extended Stile . 12″ DEEP 30” 12” • • • • MODIFICATIONS GRID KEY • STD Available Standard on these cabinets 5 Day Express Response Item Cubic Feet W1830BC 5. Description Mod. will not feature sand-through characteristics.Back Recessed Toekick .Right Cabinet Box Only Cabinet Case Only Cabinet Front Only Cabinet False Panel Cabinet Frame Only Cabinet with No Door.7 Matching Interior Plywood (MIP) standard.OFFICE & FURNITURE CABINET NOMENCLATURE Cabinet Type Cabinet Width NOTE: If order is placed in Arch/Cathedral door style.Right Furniture Finished Plywood Ends Flush Toekick Flush Toekick Arch Flush Toekick Furniture Increased Depth MIP RD RECTKALL RECTKBK RECTKL RECTKR TVRAV TVRFV TVRVV VTK Matching Interior Plywood Reduced Depth Recessed Island Toekick Recessed Toekick .0 Matching Interior Plywood (MIP) standard. To change the top rail valance. Furniture (TVRFV).2 W2448BC 10.Right Valance Top Rail. will not feature sand-through characteristics. If ordered with Heirlooming Technique.Left Authentic End .9 W3030BC 8. OFFICE & FURNITURE Custom Modifications AUTHL ADDTK AUTHR • FFDL FFDR • FPEB CBO CCO CFNTO CFP STD FTK CFRMO CND DRWTK • FTKAV FTKFV • ID MIP RD • STD • EXB EXL EXR FB • • STD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK • Construction Upgrades APC 3/4X PE STD BOOKCASE. 2014 .Left Face Frame and Door on End . or Straight Valance (TVRVV). 30″ HIGH.2 W3648BC 15. Description Mod. Straight Void Toekick APC 3/4X PE All Plywood Construction Dovetail Drawer Undermount Plywood Ends DRWTK Model BOOKCASE. Description ADDTK AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND Add Toekick Authentic End .7 W3048BC 13. If ordered with Heirlooming Technique. with Drawer Toekick Drawer EXB EXL EXR FB FFDL FFDR FPEB FTK FTKAV FTKFV ID Extended Stiles .Right Finished Ends Face Frame and Door on End . All bookcase shelves are 3/4″ thick plywood with 1 1/2″ tall solid wood rail attached. or Straight Valance (TVRVV). Furniture Valance Top Rail.Left Recessed Toekick . 5 WFBC3654 17. To change the top rail valance.6 WFBC1860 9. Face frame has a profiled inside edge. If ordered with Heirlooming Technique. and 54″ have two adjustable shelves and one fixed shelf. 51″.8 WFBC3054 14.3 WFBC3066 17. To change the top rail valance. or 54″ HIGH. 12″ DEEP 18”.6 WFBC2457 12. 2014 OFFICE & FURNITURE STD . Furniture (TVRFV).5 WFBC2451 11. specify one of the following modifications: Arch (TVRAV). 60″. Custom Modifications AUTHL ADDTK AUTHR • FFDL FFDR FPEB CBO CCO CFNTO CFP STD FTK CFRMO CND DRWTK • FTKAV FTKFV • ID MIP RD • STD • EXB EXL EXR FB • • STD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK • Construction Upgrades APC 3/4X PE WALL FURNITURE BOOKCASE. 51″.4 WFBC2460 13.Model WALL FURNITURE BOOKCASE. If ordered with Heirlooming Technique. will not feature sand-through characteristics. Bookcases can only be reduced to 9″.6 WFBC2448 10. 60″. will not feature sand-through characteristics. 30”. 30”. 57″. and 66″ have three adjustable shelves and one fixed shelf.1 WFBC3657 18. 24”. or 66″ HIGH. 24”.2 WFBC3660 19. or 36” WFBC1857 9. Custom Modifications AUTHL ADDTK AUTHR •* FFDL FFDR FPEB CBO CCO CFNTO CFP STD FTK • CFRMO • FTKAV FTKFV ID MIP RD • STD • CND DRWTK EXB EXL EXR FB • • STD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK • *Not available on 66″ high Construction Upgrades APC 3/4X PE STD Effective March 17. Matching Interior Plywood (MIP) standard. Furniture (TVRFV).9 39” 42” or 48” 57” 60” or 66” 18 12” • • • • • • 57″.3 WFBC1854 9.2 WFBC3048 13.1 WFBC2454 11.1 WFBC3057 15. 48″. or Straight Valance (TVRVV).2 30” 33” or 36” 48” 51” or 54” 18” 12” • • • • • • Cubic Feet 313 48″.1 WFBC1866 11. or 36” Cubic Feet Model WFBC1848 8.7 WFBC3648 15. 12″ DEEP 18”. Face frame has a profiled inside edge. or Straight Valance (TVRVV). Matching Interior Plywood (MIP) standard. specify one of the following modifications: Arch (TVRAV).4 WFBC3651 16. Bookcases can only be reduced to 9″.0 WFBC2466 14.1 WFBC1851 8.3 WFBC3060 16.6 WFBC3666 20.0 WFBC3051 13. 30”. Matching Interior Plywood (MIP) standard. Custom Modifications AUTHL ADDTK AUTHR CBO CCO CFNTO CFP STD FFDL FFDR CFRMO • FPEB FTK FTKAV FTKFV • STD • ID MIP RD • STD • CND DRWTK EXB EXL EXR FB • • STD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK • Construction Upgrades APC 3/4X PE STD Effective March 17.0 TBC368718 39.8 TBC308718 33.4 TBC309012 23. 2014 .3 TBC249018 27. or Straight Valance (TVRVV). will not feature sand-through characteristics.1 TBC308412 22.7 TBC309018 34. 90″ tall includes five adjustable shelves and one fixed shelf.4 TBC248718 26.3 TBC368412 26.7 TBC308712 23. 30”.9 TBC369012 28. Bookcases can only be reduced to 9″. specify one of the following modifications: Arch (TVRAV). 87″. 12″ or 18″ DEEP 24”.1 TBC368712 27.1 TBC369018 40.1 TBC249012 19. or 90″ HIGH.Model TALL BOOKCASE.9 TBC368418 37.5 TBC248418 25.5 84″ and 87″ tall include four adjustable shelves and one fixed shelf.8 TBC248712 18. or 36” 48” or 51” Opening 314 84” or 87” 11/2” Fixed Shelf TBC248412 TBC308412 TBC368412 TBC248712 TBC308712 TBC368712 TBC248418 TBC308418 TBC368418 TBC248718 TBC308718 TBC368718 27” Opening 6” Flush Toekick 12” or 18” 24”. Furniture (TVRFV). If ordered with Heirlooming Technique. or 36” 54” Opening 90” TBC249012 TBC309012 TBC369012 11/2” Fixed Shelf TBC249018 TBC309018 TBC369018 OFFICE & FURNITURE 27” Opening 6” Flush Toekick 12” or 18” • • • • • • • Cubic Feet TBC248412 18.9 TBC308418 31. 84″. Face frame has a profiled inside edge. To change the top rail valance. 2014 OFFICE & FURNITURE TALL BOOKCASE. or 36” 57” Opening TBC249312 TBC309312 TBC369312 93” 11/2” Fixed Shelf TBC249318 TBC309318 TBC369318 27” Opening 12” or 18” 24”. Furniture (TVRFV).6 TBC309612 25.2 TBC249618 29. in which the pedestal will be 1/4″ recessed when centered. will not feature sand-through characteristics. specify one of the following modifications: Arch (TVRAV). 93″ or 96″ HIGH. • Matching Interior Plywood (MIP) standard. • To change the top rail valance.5 TBC309618 36. • If ordered with Heirlooming Technique. • Bookcases can only be reduced to 9″. 12″ or 18″ DEEP Cubic Feet . Custom Modifications AUTHL ADDTK AUTHR CBO CCO CFNTO CFP STD 12” or 18” 315 FFDL FFDR FPEB FTK • CFRMO CND DRWTK • FTKAV FTKFV EXB EXL EXR FB • • STD ID MIP RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • STD • • VTK • Construction Upgrades APC 3/4X PE STD Effective March 17.2 TBC249318 28.4 TBC369612 30.6 TBC369312 29. • Separate pedestal base included but shipped separately on 93″ and 96″ tall.6 TBC309318 35. Pedestals are the same width as the cabinet box except when specified with FPEB. or Straight Valance (TVRVV). • 96″ tall includes six adjustable shelves and one fixed shelf. 30”.8 TBC249612 20.0 TBC309312 24. 30”.Model 24”.1 • 93″ tall includes five adjustable shelves and one fixed shelf.2 TBC369318 41.3 TBC369618 43. or 36” 60” Opening 96” TBC249612 TBC309612 TBC369612 TBC249618 TBC309618 TBC369618 27” Opening TBC249312 20. • Face frame has a profiled inside edge. Bookcases can only be reduced to 9″. 30”.5 24”. Custom Modifications AUTHL ADDTK AUTHR FFDL FFDR CBO CCO CFNTO CFP CFRMO • • • FPEB FTK FTKAV FTKFV ID MIP RD • STD • • STD • • CND DRWTK EXB EXL EXR FB • • STD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK • Construction Upgrades APC 3/4X PE STD Effective March 17. 30”.4 TBCD248718 26.1 TBCD369018 40. 90″ tall includes five adjustable shelves and one fixed shelf. To change the top rail valance. Face frame has a profiled inside edge.7 TBCD309018 34. specify one of the following modifications: Arch (TVRAV). Top of doors match to a standard. 34 1/2″ high. 12″ or 18″ DEEP 24”.1 TBCD308412 22.7 TBCD308712 23. Matching Interior Plywood (MIP) standard.1 TBCD249012 19. 84″.3 TBCD368412 26.8 TBCD308718 33. or 36” 48” or 51” Opening TBCD248412 316 TBCD308412 TBCD368412 84” or 87” TBCD248418 11/2” TBCD308418 Fixed Shelf TBCD368418 TBCD248712 TBCD308712 TBCD368712 TBCD248718 TBCD308718 TBCD368718 18. full height base door.9 TBCD368418 37. or Straight Valance (TVRVV).3 TBCD249018 27.9 TBCD369012 28.9 TBCD308418 31.5 TBCD248418 25. or 36” 54” Opening TBCD249012 TBCD309012 TBCD369012 90” 11/2” Fixed Shelf TBCD249018 TBCD309018 TBCD369018 27” Opening OFFICE & FURNITURE TBCD248412 27” Opening 12” or 18” 6” Flush Toekick 12” or 18” Cubic Feet • • • • • • • 84″ and 87″ tall include four adjustable shelves and one fixed shelf.0 TBCD368718 39. 87″.8 TBCD248712 18. Furniture (TVRFV). or 90″ HIGH.Model TALL BOOKCASE with DOORS.4 TBCD309012 23. 2014 .1 6” Flush Toekick TBCD368712 27. 8 TBCD249612 20.2 TBCD369318 41.2 TBCD249618 29. 30”. 12″ or 18″ DEEP Cubic Feet . 30”. 93″ or 96″ HIGH. • 96″ tall includes six adjustable shelves and one fixed shelf. Furniture (TVRFV).Model 24”.6 TBCD309318 35.6 TBCD369312 29.3 TBCD369618 43. • To change the top rail valance.0 TBCD309312 24. in which the pedestal will be 1/4″ recessed when centered.2 TBCD249318 28.6 TBCD309612 25. • Bookcases can only be reduced to 9″. full height base door. 34 1/2″ high. • Separate pedestal base included but shipped separately on 93″ and 96″ tall. 2014 OFFICE & FURNITURE TALL BOOKCASE with DOORS.1 TBCD249312 TBCD309312 TBCD369312 TBCD249318 TBCD309318 TBCD369318 27” Opening 12” or 18” 24”.5 TBCD309618 36. • Face frame has a profiled inside edge. Custom Modifications AUTHL ADDTK AUTHR FFDL FFDR FPEB CBO CCO CFNTO • • • FTK FTKAV FTKFV • 12” or 18” CFP CFRMO CND DRWTK • EXB EXL EXR FB • • STD ID MIP RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • STD • • VTK • Construction Upgrades APC 3/4X PE STD Effective March 17. specify one of the following modifications: Arch (TVRAV). Pedestals are the same width as the cabinet box except when specified with FPEB. • Top of doors match to a standard.4 TBCD369612 30. • Matching Interior Plywood (MIP) standard. or 36” 57” Opening 93” 11/2” Fixed Shelf 20. or Straight Valance (TVRVV). or 36” 60” Opening 96” TBCD249312 TBCD249612 TBCD309612 TBCD369612 TBCD249618 TBCD309618 TBCD369618 27” Opening 317 • 93″ tall includes five adjustable shelves and one fixed shelf. 29″ HIGH. or 36” APC 3/4X PE • • • DDO122924 L or R 7. • Depth can be increased to a maximum of 24″. 24″ DEEP 24” 29” DDO122924 L or R DDO152924 L or R DDO182924 L or R DDO212924 L or R NEW NEW 24”.9 • Depth can be reduced to a minimum of 12″. 33”.1 DDO212921 L or R 10.Model DESK DOOR DRAWER BASE. 2014 . Custom Modifications 29” AUTHL ADDTK AUTHR • 24” DDO242924 DDO272924 DDO302924 DDO332924 DDO362924 CBO CCO CFNTO CFP CFRMO CND DRWTK EXB EXL EXR FB • • • • • • •* • • • FFDL FFDR FPEB FTK FTKAV FTKFV • • • •+ *Not available on 12″ and 15″ wide ID MIP RD • • TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • VTK • + Not available on 12″ wide Construction Upgrades APC 3/4X PE • • • Effective March 17.8 DDO242924 13. or 36” Cubic Feet DDO122921 L or R 6. 27”. 21″ DEEP 21” 29” DDO122921 L or R DDO152921 L or R DDO182921 L or R DDO212921 L or R 318 NEW NEW 24”.3 DDO302924 14. 33”.4 DDO272924 13.2 DDO212924 L or R 11.6 DDO332924 16.0 DDO362921 17.0 DDO302921 14. 30”.4 DDO152921 L or R 7.8 DDO182924 L or R 10.1 DDO362924 17.3 • Depth can be reduced to a minimum of 12″. 27”. Custom Modifications 29” AUTHL ADDTK AUTHR DDO242921 DDO272921 DDO302921 DDO332921 DDO362921 21” CBO CCO CFNTO CFP CFRMO CND DRWTK EXB EXL EXR FB • • • • • • •* • • • FFDL FFDR FPEB FTK FTKAV FTKFV ID MIP RD • • • •+ • • • *Not available on 12″ and 15″ wide TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • VTK • + Not available on 12″ wide Construction Upgrades OFFICE & FURNITURE DESK DOOR DRAWER BASE. 29″ HIGH.5 DDO242921 11.9 DDO332921 13. 30”.3 DDO152924 L or R 8.8 DDO182921 L or R 9.9 DDO272921 13. 4 DDR272924 13.4 DDR152921 7. 33”. 27”. 27”.8 DDR182921 9.7 • Depth can be reduced to a minimum of 12″. 21″ DEEP 21” DDR122921 DDR152921 DDR182921 DDR212921 29” 24”. 24″ DEEP 24” DDR122924 DDR152924 DDR182924 DDR212924 29” 24”.8 DDR182924 10. • Depth can be increased to a maximum of 24″. 30”.7 OFFICE & FURNITURE Construction Upgrades • Depth can be reduced to a minimum of 12″.4 DDR362921 15. 30”.1 DDR212921 10. 2014 .Model DESK DRAWER BASE. Custom Modifications AUTHL ADDTK AUTHR 21” 319 FFDL FFDR CBO CCO • • FPEB FTK FTKAV FTKFV • • •+ *Not available on 12″ and 15″ wide CFNTO ID DRWTK EXB EXL EXR FB • •* • • • MIP RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • CFP CFRMO • CND VTK • • • CND DRWTK EXB EXL EXR FB • • • + Not available on 12″ wide DESK DRAWER BASE. or 36” DDR242924 DDR272924 DDR302924 DDR332924 DDR362924 29” 24” APC 3/4X PE • • • DDR122924 7.5 DDR242921 11. 29″ HIGH.9 DDR332924 16. or 36” DDR242921 DDR272921 DDR302921 DDR332921 DDR362921 29” Cubic Feet DDR122921 6.5 DDR302924 14.3 DDR152924 8.3 DDR362924 17.9 DDR272921 12.0 DDR302921 13. 29″ HIGH. Custom Modifications AUTHL ADDTK AUTHR • FFDL FFDR CBO CCO • • FPEB FTK FTKAV FTKFV • • •+ *Not available on 12″ and 15″ wide CFNTO ID CFP CFRMO • • •* MIP RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • • • VTK • + Not available on 12″ wide Construction Upgrades APC 3/4X PE • • • Effective March 17.2 DDR212924 11.2 DDR332921 14. 33”.8 DDR242924 13. which accommodates letter and legal filing. 29″ HIGH. which accommodates letter and legal filing. 21″ or 24″ DEEP 15”.2 DFD212924 11. 29″ HIGH. See page 326. FSHK also sold separately.8 • Door is attached to file drawer.9 DDFD242924 13. does not feature soft close guide.1 DFD212921 10.8 DFD182924 10. • Bottom of drawer is not designed to support any weight. FSHK also sold separately.9 DDFD302921 14.9 OFFICE & FURNITURE 24” or 30” 29” • Includes Filing System Hardware Kit (FSHK). 18”. 21″ or 24″ DEEP APC 3/4X PE • • • DDFD242921 11. • Drawers utilize 125 lb. or 21” 29” 320 21” or 24” Cubic Feet DFD152921 7.4 DDFD302924 17. full extension progressive sidemount guide.5 DFD152924 8. • Includes Filing System Hardware Kit (FSHK). Custom Modifications AUTHL ADDTK AUTHR •* FFDL FFDR CBO CCO • • FPEB FTK FTKAV FTKFV • • • *Not available on 21″ deep CFNTO ID CFP DRWTK EXB EXL EXR FB • •+ • • • RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV CFRMO MIP • CND • • VTK • + Not available on 15″ wide Construction Upgrades DESK DOUBLE FILE DRAWER BASE. See page 326. 21” or 24” Custom Modifications AUTHL ADDTK AUTHR •* FFDL FFDR CBO CCO • • FPEB FTK FTKAV FTKFV • • • CFNTO ID CFP MIP • DRWTK EXB EXL EXR FB • • • • • RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV CFRMO CND • • VTK • *Not available on 21″ deep Construction Upgrades APC 3/4X PE • • • Effective March 17.Model DESK FILE DRAWER BASE.8 DFD182921 9. 2014 . will not feature sand-through characteristics.9 29” • • • • • • Matching interior.9″ minimum.0 DWB152924FH 7. No door available to fit unit. 2014 OFFICE & FURNITURE 21” or 24” . 29″ HIGH. Face frame has a profiled inside edge. Hardwood veneer plywood. 21″ or 24″ DEEP CPU122921 5. If ordered with Heirlooming Technique.1 18” 29” 29” 21” 21” • • • • Door mounted zinc colored Smart Stop guides. Custom Modifications DWB152921FH AUTHL ADDTK AUTHR DWB182921FH 18” 15” •* FFDL FFDR 29” 29” CBO CCO • • FPEB FTK FTKAV FTKFV • • • *Not available on 21″ deep 24” 24” ID CFP DRWTK EXB EXL EXR FB • •+ • • • RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV CFRMO MIP • CND • • VTK • + Not available on 15″ wide Construction Upgrades APC 3/4X • DWB152924FH CFNTO 321 PE • DWB182924FH CPU BASE. 29″ HIGH. DWB152921FH includes one 35 quart grey waste basket inserted into solid hardwood support.8 DWB182921FH 8. DWB182921FH and DWB152924FH includes one 35 quart grey waste basket and one trash bag holder bin inserted into solid hardwood support.1 CPU122924 5.7 DWB182924FH 9. Custom Modifications AUTHL ADDTK AUTHR FFDL FFDR CBO CCO •* STD FPEB FTK FTKAV FTKFV • • •+ *Not available on 21″ deep + CFNTO CFP CFRMO CND DRWTK • ID MIP RD STD •▲ Not available on 12″ wide EXB EXL EXR FB • • STD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • VTK • ▲ Not available on 24″ deep Construction Upgrades APC 3/4X PE Effective March 17. DWB182924FH includes two 35 quart grey waste baskets inserted into solid hardwood support.6 CPU152924 6. 15″ or 18″ WIDE. 21″ or 24″ DEEP 15” Cubic Feet DWB152921FH 6.0 CPU152921 6.Model DESK WASTE BASKET FULL HEIGHT BASE. Reduced Depth (RD) . 21″ or 24″ DEEP 21” or 24” Cubic Feet PRB242921 11. 29″ HIGH. Decorative hardware screws must be countersunk to prevent scratching of adjacent cabinets and face frame of DER.Model PRINTER BASE.3 Features one fixed shelf in center of cabinet. 21″ or 24″ DEEP 29” 33” or 36” 12” OFFICE & FURNITURE 21” or 24” 21” or 24” • • • • • • PE • DER333321 L or R 16.0 DER363624 L or R 21.9 PRB242924 13. • 75 lb. 29” Custom Modifications AUTHL ADDTK AUTHR •* 322 FFDL FFDR CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV • • • ID DRWTK EXB EXL EXR FB • • • • • MIP RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • CFP CFRMO CND • • VTK • *Not available on 21″ deep Construction Upgrades APC 3/4X • 33” or 36” 33” or 36” 33” or 36” 21” or 24” 18 3 /8 ” 87/8” 3 36 3” ” . 2014 . DER333321 L or R wall width is 33″ x 33″.6 • 3/4″ full depth slide out shelf. maximum shelf capacity. 29″ HIGH. DER363624 L or R wall width is 36″ x 36″.29 3 33 5 /8” /8” DESK EASY REACH. Integrated soft close hinge not included. Custom Modifications AUTHL ADDTK AUTHR FFDL FFDR FPEB CBO CCO • • FTK • FTKAV FTKFV CFNTO CFP CFRMO CND DRWTK EXB EXL EXR FB • ID MIP • RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • VTK • Construction Upgrades APC • 3/4X PE • Effective March 17. Addison door panels features a unique raised profile due to the narrow panel width. 24”. 12″ HIGH. • Standard with all plywood construction and wood dovetail drawer. 18”.7 FD241224 5. 27”.9 • On partial overlay styles.4 FD271224 6.5 FD181224 4. or 36” FD211224 4. or 36” 63/4” 24” FD150624 FD180624 FD210624 FD240624 FD270624 FD300624 FD360624 Cubic Feet FD150624 2.3 FD270624 3.9 12” 24” FD151224 FD181224 FD211224 FD241224 FD271224 FD301224 FD361224 • Drawer front to face frame reveal is justified to the bottom to be consistent with both full overlay and partial overlay. 21”. drawer front to face frame is justified to the top to be consistent with current partial overlay reveal of 1″. Partial overlay top reveal is 1 1/8″ and bottom reveal is 1″. 18”. Full overlay top reveal is 3/8″ and bottom reveal is 1/4″. 24″ DEEP FD151224 3.Model FURNITURE DRAWER. 27”.7 FD300624 4.9 FD240624 3. 21”.1 15”.5 FD210624 2.1 FD180624 2. 30”. 30”. 323 Custom Modifications AUTHL ADDTK AUTHR • FFDL FFDR FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFP CFRMO CND DRWTK • ID • MIP RD • • EXB EXL EXR FB • • • TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK Construction Upgrades 3/4X • PE FURNITURE DRAWER. 24″ DEEP 15”.1 FD360624 4. Bottom reveal is 1/4″.6 FD361224 7.0 FD301224 6. 24”. Custom Modifications AUTHL ADDTK AUTHR • FFDL FFDR FPEB CBO CCO • • FTK • FTKAV FTKFV CFNTO CFP CFRMO • ID MIP RD • • CND DRWTK EXB EXL EXR FB • • • TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV VTK Construction Upgrades APC 3/4X STD • PE Effective March 17. 2014 OFFICE & FURNITURE APC STD . • Standard with all plywood construction and wood dovetail drawer. 6 3/4″ HIGH. 4 FDWB301824 9.3 FDWB361824 11. or 36” 18” 324 Cubic Feet FDWB151824 4.1 • Drawer front to face frame reveal is justified to the bottom to be consistent with both full overlay and partial overlay. 21”. ONE SIDED. 24”. 19/16” Construction Upgrades APC 74” • 3/4X PE Finish Techniques Distressing Heirloom • • 213/4” or 243/4” 221/2” or 251/2” 3 /4 ” 19/16” TCM8 3 /4 ” 3 /4 ” Veneer Panel 3 /4 ” Build-up Strip 1/16” Effective March 17. 24” Custom Modifications AUTHL ADDTK AUTHR FFDL FFDR CBO CCO • • FPEB FTK FTKAV FTKFV • • • CFNTO ID DRWTK EXB EXL EXR FB • •* • • • MIP RD TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV • • CFP CFRMO CND • • VTK • *Not available on 15″ wide Construction Upgrades APC 3/4X PE STD WOOD TOPS. 18″ HIGH. 24″ DEEP 15”.Model FURNITURE DRAWER WINDOW BENCH. 30”.2 • 3/4″ thick veneer over MDF panels with build-up strips to 1 1/2″ thick and Traditional Countertop Moulding (TCM8) on front edge. Full overlay top reveal is 1 7/8″ and bottom reveal is 1/4″.8 1TWT7224 4.8 FDWB211824 6.9 FDWB181824 5.6 FDWB271824 8. 2014 . MODIFICATIONS No modifications available for these products. 22 1/2″ or 25 1/2″ DEEP 221/2” or 251/2” OFFICE & FURNITURE 74” 1TWT7221 3. 27”. Partial overlay top reveal is 2 5/8″ and bottom reveal is 1″.7 FDWB241824 7. 18”. 50”. 2014 . or 74” 221/2” or 251/2” 19/16” 20”. 62”. 22 1/2″ or 25 1/2″ DEEP Cubic Feet Finish Techniques Distressing Heirloom • • Effective March 17.Model 20”.2 3TWT2424 1. 68”.1 3TWT2421 1. 32”. 56”.7 3TWT3621 2. 38”. 56”.4 3TWT3021 1.6 3TWT6624 3.2 3TWT4824 2.2 325 • 3/4″ thick veneer over MDF panels with build-up strips to 1 1/2″ thick and Traditional Countertop Moulding (TCM8) on front and side edges. or 74” 213/4” or 243/4” 221/2” or 251/2” 3 /4 ” 19/16” 3 /4 ” Veneer Panel TCM8 3 /4 ” Model 3TWT1821 3TWT2421 3TWT3021 3TWT3621 3TWT4821 3TWT5421 3TWT6021 3TWT6621 3TWT7221 Model 3TWT1824 3TWT2424 3TWT3024 3TWT3624 3TWT4824 3TWT5424 3TWT6024 3TWT6624 3TWT7224 3/4” Build-up Strip 1/16” Overall Width Overall Depth 20″ 26″ 32″ 38″ 50″ 56″ 62″ 68″ 74″ 22 1/2″ 22 1/2″ 22 1/2″ 22 1/2″ 22 1/2″ 22 1/2″ 22 1/2″ 22 1/2″ 22 1/2″ Overall Width Overall Depth 20″ 26″ 32″ 38″ 50″ 56″ 62″ 68″ 74″ 25 1/2″ 25 1/2″ 25 1/2″ 25 1/2″ 25 1/2″ 25 1/2″ 25 1/2″ 25 1/2″ 25 1/2″ 3TWT1821 1. 26”.9 3TWT5424 3.8 3TWT1824 1.9 3TWT3624 2.9 3TWT6021 3.0 3TWT4821 2. THREE SIDED.6 3TWT3024 1.5 3TWT7221 3. 26”. MODIFICATIONS No modifications available for these products. 50”.6 3TWT5421 2.2 3TWT6621 3.9 3TWT7224 4. 68”. 62”. Construction Upgrades APC • 3/4X PE OFFICE & FURNITURE WOOD TOPS. 38”.2 3TWT6024 3. 32”. 5 4TWT4833 3. back. 2014 . 68”.1 4TWT7227 4. 56”. 18”.1 4TWT5427 3.4 4TWT6027 3. 62”.0 FSHK18 1.8 4TWT6627 4. and side edges.0 FSHK21 1. MODIFICATIONS No modifications available for these products.1 4TWT6033 4.0 FSHK24 1.4 19/16” 50”. or 74” 27” or 33” Cubic Feet 4TWT4827 3.7 4TWT5433 4. and DDFD______. 19/16” TCM8 3 /4 ” 3 /4 ” Veneer Panel 3 /4 ” MODIFICATIONS Build-up Strip No modifications available for these products. 68”.0 • Accommodates side-to-side letter and legal filing.0 FSHK30 1. DFD______. Effective March 17. • Filing System Hardware Kit is also included in 2DB__FD.0 4TWT7233 5. or 30” 3/4X PE Finish Techniques Distressing Heirloom • • FSHK15 1. 21”. FOUR SIDED. 56”. 62”. 1/16” Construction Upgrades Model Overall Width Overall Depth APC 50″ 56″ 62″ 68″ 74″ 27″ 27″ 27″ 27″ 27″ • Overall Width Overall Depth 50″ 56″ 62″ 68″ 74″ 33″ 33″ 33″ 33″ 33″ 4TWT4827 4TWT5427 4TWT6027 4TWT6627 4TWT7227 OFFICE & FURNITURE Model 4TWT4833 4TWT5433 4TWT6033 4TWT6633 4TWT7233 FILING SYSTEM HARDWARE KIT 15”.Model WOOD TOPS.5 4TWT6633 5. 27″ or 33″ DEEP 50”. 24”. or 74” 326 251/2” or 311/2” 27” or 33” 3 /4 ” • 3/4″ thick veneer over MDF panels with build-up strips to 1 1/2″ thick and Traditional Countertop Moulding (TCM8) on front. See pages 215 and 320. 6 UCD3021 2.6 UCD2718 2. end panels will not be finished. Custom Modifications UCD2421 UCD2721 AUTHL ADDTK AUTHR 30” or 36” FFDL FFDR 4 3 /4 ” 21” 2 3 /4 ” Frame Opening Height FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFP CFRMO • ID MIP RD • • • CND DRWTK EXB EXL EXR • • TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV FB VTK Construction Upgrades APC • 3/4X PE • UCD3021 UCD3621 Effective March 17. Not trimmable. end panels will not be finished.6 UCD3621 2. Drawer box within cabinet is 2″ high (outside dimension). End panels ordered in Distinction will feature non-matching laminate exterior. 2014 OFFICE & FURNITURE APC UCD3018 UCD3618 . The frame to end panel offset is 3/4″.6 UCD2721 2.6 Cabinet is 4 3/4″ high. 4 3/4″ HIGH. Drawer front is 3/4″ slab front. 4 3/4″ HIGH. The frame to end panel offset is 3/4″. Drawer front is 3/4″ slab front.6 UCD3018 2. which is designed to accommodate the vanity desk leg. Reduced depth is available in 3″ increments. which is designed to accommodate the vanity desk leg. When ordered in PE or APC. Custom Modifications 30” or 36” AUTHL ADDTK AUTHR 43/4” FFDL FFDR 18” 2 3 /4 ” Frame Opening Height FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFP CFRMO CND DRWTK • ID MIP RD • • • EXB EXL EXR • • TVRAV RECTKALL RECTKL TVRFV RECTKBK RECTKR TVRVV 327 FB VTK Construction Upgrades UNDER COUNTER DRAWER.6 Cabinet is 4 3/4″ high. Not trimmable. When ordered in PE or APC. 18″ DEEP 24” or 27” 43/4” 18” 23/4” Frame Opening Height UCD2418 UCD2718 • • • • • • Cubic Feet UCD2418 2.Model UNDER COUNTER DRAWER.6 UCD3618 2. 21″ DEEP 24” or 27” 4 3 /4 ” 21” 2 3 /4 ” Frame Opening Height 3/4X • • • • • • PE • UCD2421 2. End panels ordered in Distinction will feature non-matching laminate exterior. Drawer box within cabinet is 2″ high (outside dimension). 7 V213218 L or R 9. Finished toekicks in matching wood veneer or laminate must be ordered separately and field installed.Left Face Frame and Door on End .9 V363221 17. Cabinet Depth 32” V243218 V273218 V303218 V333218 V363218 V243221 V273221 V303221 V333221 V363221 V123221 L or R V153221 L or R V183221 L or R V213221 L or R V243221 L or R Model Cubic Feet V123218 L or R 5. Distance between back of drawer box and back interior of cabinet is 2 3/4″.1 V123221 L or R 6.9 V243218 L or R 10.0 V303218 12.4 Custom Modifications AUTHL AUTHR 18” or 21” Cubic Feet CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV ID • • •+ • CFP CND DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • CFRMO • INVFRM *Not available on 12″ and 15″ wide. with Drawer Toekick Drawer Extended Stiles . Description Mod.8 V273221 13. 32″ high vanity base cabinets are not predrilled for adjustable or roll trays. Description AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND Authentic End . 32″ HIGH.9 V153221 L or R 7.6 V333221 16. or 24” 32” V123218 L or R V153218 L or R V183218 L or R V213218 L or R V243218 L or R 18” or 21” VANITY CABINETS Vanity Cabinets are shipped with an unfinished toekick. 15”.2 V333218 13. vanity bases will have Square doors and vanity utilities and linen closets will have an Arch/Cathedral top door and Square lower doors.Left Authentic End .4 V363218 15.2 V303221 14.3 V183221 L or R 9.Back Recessed Toekick .Left Extended Stile .Left Recessed Toekick .Both EXL EXR FB FFDL Extended Stile .4 V243221 11.6 V243218 10. 2014 .6 V183218 L or R 8.Right Furniture Finished Plywood Ends Flush Toekick Flush Toekick Arch Flush Toekick Furniture ID INVFRM MIP RD RECTKALL RECTKBK RECTKL RECTKR TKP VTK Increased Depth Inverted Frame Matching Interior Plywood Reduced Depth Recessed Island Toekick Recessed Toekick . Description Mod. 18″ or 21″ DEEP 12”.0 V243221 L or R 11. Description Mod.4 V153218 L or R 6. 21”.{ { Cabinet Type { { VANITY CABINET NOMENCLATURE Cabinet Width TOEKICKS Cabinet Height NOTE: If order is placed in Arch/Cathedral door style.8 V273218 11. 18”.6 V213221 L or R 10.Right Finished Ends Face Frame and Door on End . Description Mod.Right Loose Toekick Void Toekick APC 3/4X PE All Plywood Construction Dovetail Drawer Undermount Plywood Ends ALF CG MD Aluminum Frame Frost Doors Cut for Glass Doors Mullion Doors DRWTK EXB FFDR FPEB FTK FTKAV FTKFV Model VANITY BASE. 328 CUSTOM MODIFICATIONS MODIFICATIONS GRID KEY • STD Available Standard on these cabinets Logix Organization Cabinet 5 Day Express Response Item CONSTRUCTION UPGRADES DECORATIVE DOOR OPTIONS Mod.Right Cabinet Box Only Cabinet Case Only Cabinet Front Only Cabinet False Panel Cabinet Frame Only Cabinet with No Door. or on 18″ deep • • • + Not available on 12″ wide Construction Upgrades APC • 3/4X PE • Effective March 17. 9 NEW V213418 L or R 9.6 NEW V183418 L or R 8.7 NEW V363418 16. 18″ or 21″ DEEP (cont’d) 39”.9 V603221 25.4 V273421 16.7 NEW V273418 12. 34 1/2″ HIGH.4 NEW V483418 21. or 36” 341/2” V243421 V273421 V303421 V333421 V363421 NEW V243418 10.5 V603218 28. 21”. 48″ and 60″ wide. 2014 VANITY CABINETS • 18” or 21” CFRMO Construction Upgrades APC 341/2” CFP .5 NEW V333418 14.3 V483221CS 22.1 V303421 17.9 V483218CS 19.7 V213421 L or R 11. 39″.1 NEW V603418 26.1 18” or 21” 39”.7 V483421CS 27.7 V333421 19.3 NEW V153418 L or R 7.5 V483221 22. 42”.1 V453221 21. 15″. 45″. or 24” V123418 L or R V153418 L or R V183418 L or R V213418 L or R V243418 L or R 341/2” V123421 L or R V153421 L or R V183421 L or R V213421 L or R V243421 L or R V123418 L or R 5.0 V243421 14.1 NEW V423418 18. 42”. or on 18″ deep • + Not available on 12″ wide Construction Upgrades APC • 3/4X PE • Effective March 17.2 V183421 L or R 9. or 48” V393218 V423218 V453218 V483218CS 32” V393221 V423221 V453221 V483221CS 18” or 21” 48” or 60” Cubic Feet Model Cubic Feet V393218 16.9 329 Custom Modifications V483218 V603218 V483221 V603221 AUTHL AUTHR 32” 18” or 21” CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV ID • • • • 3/4X EXL EXR FB FFDL FFDR • • • • TKP VTK DRWTK MIP RD RECTKALL RECTKL RECTKBK RECTKR • • • INVFRM EXB CND • • • VANITY BASE. 18”. 33”.9 V423218 17. 45”. or 48” V393418 V423418 V453418 V483418CS 341/2” V393421 V423421 V453421 V483421CS 18” or 21” 48” or 60” V483418 V483421 V603418 V603421 • NEW 18” or 21” V243418 V273418 V303418 V333418 V363418 PE Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV ID • • •+ • CFP CND DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • CFRMO • INVFRM • • *Not available on 12″.6 V453218 18.3 V123421 L or R 6.3 NEW V303418 13.1 NEW V243418 L or R 10. 27”.9 V483421 27.8 V423421 24.6 V363421 21.Model VANITY BASE.8 NEW V393418 17.9 V423221 20. 18″ or 21″ DEEP 12”.5 V483218 19.4 V153421 L or R 8. 42″.3 NEW V453418 19.6 NEW V483418CS 21.9 V393421 22.3 24”. 45”.2 V243421 L or R 14.2 V453421 25. 15”. 30”.2 V603421 30. 32″ HIGH.0 V393221 18. 9 VSB423221 20. 2014 .9 VSB483221 22.6 VSB243221 L or R 11.5 VSB423218 17.9 VSB243218 10. 42″ and 48″ wide.4 VSB273218 11.2 VSB243218 L or R 10.3 VSB303221 14.3 VSB483221CS 22. 42”.4 VSB393218 16. or 36” FP VSB243218 VSB273218 VSB303218 VSB333218 VSB363218 32” VSB243221 VSB273221 VSB303221 VSB333221 VSB363221 18” or 21” 39”.8 VSB183221 L or R 9.Model VANITY SINK BASE with FALSE PANEL. or 24” FP 18” or 21” 330 VSB153218 L or R 6.9 VSB273221 13.9 VSB393221 18.0 VSB363221 17.1 VSB243221 11. 18″ or 21″ DEEP 15”.9 = False Panel 32” Cubic Feet 24”. 33”. 27”. 39″.9 VSB483218 19.0 VSB213218 L or R 9.9 VSB363218 15.1 VSB453221 21.5 VSB483218CS 19.2 VSB153221 L or R VSB183221 L or R VSB213221 L or R VSB243221 L or R VSB213221 L or R 10. 32″ HIGH. or on 18″ deep Construction Upgrades APC • 3/4X PE • Effective March 17. 21”. 30”.6 VSB333221 16. 18”.7 VSB333218 13.8 VSB183218 L or R 8.4 VSB153218 L or R VSB183218 L or R VSB213218 L or R VSB243218 L or R VSB153221 L or R 7. 45”.5 VSB453218 18.6 VSB303218 12. or 48” FP FP 32” VSB393218 VSB423218 VSB453218 VSB483218CS 18” or 21” 48” VSB393221 VSB423221 VSB453221 VSB483221CS FP FP 32” VANITY CABINETS 18” or 21” VSB483218 VSB483221 Custom Modifications AUTHL AUTHR CBO CCO CFNTO CFP CFRMO CND • • • STD • • FPEB FTK FTKAV FTKFV ID • • • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 15″. Model VANITY SINK BASE with FALSE PANEL. 39″. or 24” 341/2” Cubic Feet 24”. or 36” FP 341/2” VSB243418 VSB273418 VSB303418 VSB333418 VSB363418 18” or 21” VSB243421 VSB273421 VSB303421 VSB333421 VSB363421 39”. 45”. 30”.1 VSB303421 17. 27”. 21”.7 VSB423421 24. 21″ DEEP 30” FP 32” 21” • 14.1 = False Panel FP Model NEW 15”.1 NEW VSB393418 17.3 NEW VSB183418 L or R 8.9 VSB483418 21.6 NEW VSB213418 L or R 9.2 VSB483421 27.2 VSB453421 25.4 VSB273421 16.3 VSB183421 L or R 9.1 NEW VSB273418 12.2 VSB393421 22.4 VSB483421CS 27. or on 18″ deep Construction Upgrades APC 3/4X PE • VANITY SINK BASE with U-SHAPED ROLL-OUT TRAY. 18”. 18″ or 21″ DEEP 18” or 21” Cubic Feet VSB153418 L or R 7.1 VSB243418 L or R 10. 34 1/2″ HIGH.2 VSB243421 L or R 14. or 48” FP FP 341/2” VSB393418 VSB423418 VSB453418 VSB483418CS 18” or 21” VSB393421 VSB423421 VSB453421 VSB483421CS Custom Modifications AUTHL AUTHR 48” FP FP 341/2” NEW 331 CBO CCO CFNTO CFP CFRMO CND • • • STD • • FPEB FTK FTKAV FTKFV ID • • • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 15″. 42″ and 48″ wide. • Cut-out for U-shape on bottom pull-out is 6 1/8″ from back of cabinet.7 NEW VSB363418 16.9 NEW NEW VSB483418CS 21. Custom Modifications AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • STD • • FPEB FTK FTKAV FTKFV ID • • • • INVFRM MIP • RD DRWTK EXB EXL EXR FB • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades APC • 3/4X PE • Effective March 17.4 VSB153421 L or R VSB183421 L or R VSB213421 L or R VSB243421 L or R VSB213421 L or R 11.6 NEW VSB453418 19.6 VSB303221U • Includes two chrome U-shaped Smart Stop pull-outs with grey shelf liner. 2014 VANITY CABINETS VSB483418 VSB483421 18” or 21” .3 NEW VSB423418 18. • Cut-out for U-shape on top pull-out is 12 1/8″ from back of cabinet.7 NEW VSB303418 13.5 NEW VSB333418 14.0 VSB243421 14. 42”.9 VSB153418 L or R VSB183418 L or R VSB213418 L or R VSB243418 L or R VSB153421 L or R 8. 32″ HIGH.7 NEW VSB243418 10.7 VSB333421 19.6 VSB363421 21. 33”. 7″D. 33”. 21″ DEEP 24” or 30” FP 341/2” 21” PE • • Bottom mounted zinc colored Smart Stop guides with 20 quart grey wastebasket inserted in chrome support. • Door on the side with the Quarter Round Shelf features a chrome and wood two-tiered rack. Dimensions of unit: 8. See page 408.1 INVFRM MIP RD DRWTK EXB EXL EXR FB FFDL FFDR • • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • Construction Upgrades APC 3/4X • VANITY SINK BASE SUPERCABINET™ with TILT DOWNS and WASTEBASKET. can be positioned in left or right corner). or 36” 341/2” 21” PE • • Quarter Round Reversible Shelf for left or right applications will be constructed from 3/4″ thick laminated furniture board (shelf shipped secure. • Tilt-out trays are also available as an accessory for field installation. 34 1/2″ HIGH. • L or R designates wastebasket location.7 VSB303421U • Includes two chrome U-shaped Smart Stop pull-outs with grey shelf liner. Dimensions of unit: 8. 21″ DEEP 30” Cubic Feet 17. • All load bearing service meet KCMA standards of 15 lbs.7″D. per square foot. • Door rack width is 10 7/8″ on 30″ wide cabinet.7″H x 17.7″H x 17. Custom Modifications AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • STD • • FPEB FTK FTKAV FTKFV ID • • • • • VSSB303421STWB L or R 17. • Bottom mounted zinc colored Smart Stop guides with 20 quart grey wastebasket inserted in chrome support. 2014 . moisture resistant plastic to allow storage of sponges & other cleaning materials. • Tilt-out trays are stain resistant. 34 1/2″ HIGH. • Door rack depth is 3 1/2″. and 13 7/8″ on 36″ wide cabinet.5″W x 16.5″W x 16. 34 1/2″ HIGH. • Includes 2 installed tilt-out trays.6 VSSB363421STWB L or R 21. • Cut-out for U-shape on top pull-out is 12 1/8″ from back of cabinet. Custom Modifications FP 341/2” 332 21” AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • STD • • FPEB FTK FTKAV FTKFV ID • • • • • VSB243421WB L or R 14. 21″ DEEP VANITY CABINETS 30”. 12 3/8″ on 33″ wide cabinet.7 INVFRM MIP RD DRWTK EXB EXL EXR FB • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades APC 3/4X • VANITY SINK BASE with WASTEBASKET.7 VSSB333421STWB L or R 19. Custom Modifications AUTHL AUTHR CBO • CCO CFNTO • • • FPEB FTK FTKAV FTKFV ID • • • • CFP INVFRM CFRMO CND • • MIP • RD DRWTK EXB EXL EXR FB • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades APC • 3/4X PE • Effective March 17.4 VSB303421WB L or R 17. • Cut-out for U-shape on bottom pull-out is 6 1/8″ from back of cabinet.Model VANITY SINK BASE with U-SHAPED ROLL-OUT TRAY. • L or R designates wastebasket location. Model VANITY SINK BASE SUPERCABINET™ with TILT DOWNS. or on 18″ deep RECTKALL RECTKL RECTKBK RECTKR • • • + Not available on 12″ wide Construction Upgrades APC 3/4X PE • • • Effective March 17. • Tilt-out trays are also available as an accessory for field installation. 333 Custom Modifications AUTHL AUTHR CBO • CCO CFNTO • • • FPEB FTK FTKAV FTKFV ID • • • • CFP INVFRM CFRMO CND • • DRWTK EXB EXL EXR FB • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR FFDL FFDR MIP RD • • • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK • Construction Upgrades 3/4X • VANITY BASE. 21″ DEEP 30”. or 36” 341/2” 21” Cubic Feet VSSB303421ST 17. per square foot.9 Custom Modifications AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV ID INVFRM MIP RD • • •+ • • • • *Not available on 12″ and 15″ wide.0 VB213218 L or R 9. 2014 VANITY CABINETS APC . • All load bearing service meet KCMA standards of 15 lbs. • Includes 2 installed tilt-out trays. 32″ HIGH. • Door rack width is 10 7/8″ on 30″ wide cabinet. SINGLE DOOR with DRAWER.8 VB243221 L or R 11.6 VB153218 L or R 6. See page 408.1 • Quarter Round Reversible Shelf for left or right applications will be constructed from 3/4″ thick laminated furniture board (shelf shipped secure. 34 1/2″ HIGH. 12 3/8″ on 33″ wide cabinet. 18″ or 21″ DEEP 32” 18” or 21” PE • VB123218 L or R 5. • Door rack depth is 3 1/2″.8 VB183221 L or R 9.4 VB153221 L or R 7.8 VB183218 L or R 8.1 VB213221 L or R 10.2 VB243218 L or R 10.6 VSSB363421ST 21. 33”. moisture resistant plastic to allow storage of sponges & other cleaning materials. • Tilt-out trays are stain resistant. • Each door features a chrome and wood two-tiered rack.5 VB123221 L or R 6.7 VSSB333421ST 19. and 13 7/8″ on 36″ wide cabinet. can be positioned in left or right corner). 27”. 45”. 45″ and 48″ wide.3 VB273221 13.1 VB333221 16.3 VB393221 18.4 Model Cubic Feet Custom Modifications AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV ID INVFRM MIP RD • • •+ • • • • *Not available on 12″ and 15″ wide.9 VB423221 20. or on 18″ deep DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • + Not available on 12″ wide Construction Upgrades VANITY BASE.8 VB243421 L or R 14. 18″ or 21″ DEEP 341/2” 334 18” or 21” Cubic Feet NEW VB123418 L or R 5.9 VB453218 18. 2014 .7 VB423218 17.6 NEW VB243418 L or R 10.3 VB303221 14.3 NEW VB213418 L or R 9. 32″ HIGH. or 48” VB393218 VB423218 VB453218 VB483218CS 32” 18” or 21” 48” VB393221 VB423221 VB453221 VB483221CS APC 3/4X PE • • • VB243218 10. 18″ or 21″ DEEP 24”.1 VB363221 17.2 VB363218 15.4 VB183421 L or R 11.1 VB483218CS 20.5 VB483218 20.1 VB213421 L or R 12.8 VB153421 L or R 9. or on 18″ deep 32” VB483218 VB483221 Construction Upgrades APC 3/4X PE • • • 18” or 21” Effective March 17.3 VB453221 21.9 VB243221 11.1 Custom Modifications AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV ID INVFRM MIP RD • • • • • • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 39″. 42”.Model VANITY BASE. SINGLE DOOR with DRAWER.1 NEW VB183418 L or R 8.5 VB333218 14. or 36” 32” VB243218 VB273218 VB303218 VB333218 VB363218 VANITY CABINETS 18” or 21” VB243221 VB273221 VB303221 VB333221 VB363221 39”.4 VB393218 16.7 VB303218 12. DOUBLE DOOR with DRAWER. 42″.5 VB273218 11.8 NEW VB153418 L or R 7.9 VB123421 L or R 7. 34 1/2″ HIGH. 33”.7 VB483221CS 23. 30”.2 VB483221 23. DOUBLE DOOR with DRAWER.1 NEW VB363418 16. • Integrated soft close hinge not included.9 NEW VB333418 14.5 NEW VB453418 19. Custom Modifications 32” 32” INVFRM EXB Construction Upgrades APC 30” ID DRWTK VANITY CABINETS AUTHL AUTHR 341/2” 21” 11.1 • Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of VER. 21″ DEEP AUTHL AUTHR 21” FPEB CBO CCO • • FTK FTKAV FTKFV • CFNTO CFP CFRMO CND DRWTK EXB RD RECTKALL RECTKL RECTKBK RECTKR EXL EXR FB FFDL FFDR • ID INVFRM MIP • • • TKP VTK • Construction Upgrades APC • 3/4X PE • Effective March 17. 42″.1 VCCB183421 L or R VANITY COSMETIC CENTER BASE.4 VB423421 24. 34 1/2″ HIGH.9 NEW VB393418 17. 42”.1 VB483418 21. or 36” 341/2” Cubic Feet NEW 335 Custom Modifications VB393418 VB423418 VB453418 VB483418CS 18” or 21” VB393421 VB423421 VB453421 VB483421CS 48” AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV ID INVFRM MIP RD • • • • • • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 39″. 27”.2 NEW VB423418 18. 18” Custom Modifications CBO • CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV 3 3 /4 ” 203/4” • • • 91/4” 3/4X • VANITY BASE EASY REACH. • Addison door panels feature a unique raised profile due to a narrow panel width.0 VB393421 22. 45″ and 48″ wide.4 VB273421 16.7 VB483421CS 27.7 VB333421 19. 18″ or 21″ DEEP VB243418 VB273418 VB303418 VB333418 VB363418 18” or 21” VB243421 VB273421 VB303421 VB333421 VB363421 39”.Model VANITY BASE. 30”.3 VB243421 14. 33”.1 VB453421 25.7 24”.1 VB483421 27. or on 18″ deep Construction Upgrades 341/2” VB483418 VB483421 APC 3/4X PE • • • 18” or 21” • Includes two-tiered wood organizer in top drawer and door rack with cord storage. 18″ or 21″ DEEP 33” 30” 18” MIP RD • EXL EXR FB • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • 33” PE • VER303218 L or R 12.2 VB303421 17.6 VB363421 21. or 48” 341/2” Model Cubic Feet NEW VB243418 10. 2014 . 32″ HIGH.9 VER333221 L or R 16.6 NEW VB303418 13.3 NEW VB273418 12. 45”.7 NEW VB483418CS 21. 34 1/2″ HIGH. Custom Modifications 341/2” AUTHL AUTHR 21” FPEB 336 CBO CCO • • FTK FTKAV FTKFV CFNTO CFP CFRMO CND DRWTK EXB RD RECTKALL RECTKL RECTKBK RECTKR EXL EXR FB FFDL FFDR • ID INVFRM • MIP • • TKP VTK • • Construction Upgrades APC 3/4X PE • VANITY DRAWER BASE.5 VDB333221 15. 30”.4 VDB363218 15.6 VDB243218 10. Addison door panels feature a unique raised profile due to a narrow panel width. 33”.4 VDB153218 6.8 VDB123221 6.Model • • • • 33” Model Cubic Feet 17.1 VDB273221 13.4 VDB183218 8.9 VDB183221 9.2 Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • •+ • CCO CFNTO CND DRWTK EXB EXL EXR FB •* • • • MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • CFP CFRMO • • INVFRM *Not available on 12″ and 15″ wide.6 VDB213218 9.5 VDB303221 14. 18″ or 21″ DEEP 32” VDB123218 VDB153218 VDB183218 VDB213218 VDB123221 VDB153221 VDB183221 VDB213221 18” or 21” 24”. Integrated soft close hinge not included. 34 1/2″ HIGH. 21″ DEEP 33” Cubic Feet Decorative hardware screws must be countersunk to prevent scratching adjacent cabinets and face frame of VER. 2014 .2 VDB333218 13.1 VDB213221 10.8 VDB273218 11. 32″ HIGH. 27”. or on 18″ deep • • FFDL FFDR • + Not available on 12″ wide Construction Upgrades APC 3/4X PE • • • Effective March 17. or 36” 32” VANITY CABINETS 18” or 21” VDB243218 VDB273218 VDB303218 VDB333218 VDB363218 VDB243221 VDB273221 VDB303221 VDB333221 VDB363221 • VDB123218 5.0 VDB303218 12.1 VER333421 L or R VANITY BASE EASY REACH. Features one fixed shelf in center of cabinet.0 VDB153221 7.8 VDB243221 11.8 VDB363221 17. 18”.Model VANITY DRAWER BASE. or 21” 341/2” Cubic Feet 337 Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • •+ • CCO CFNTO CND DRWTK EXB EXL EXR FB •* • • • MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • CFP CFRMO • • INVFRM *Not available on 12″ and 15″ wide.1 VCCDB183421 • Top drawer features two-tiered wood organizer.6 NEW VDB333418 14. 33”.0 VDB153421 9.4 VDB183421 11.0 24”. 27”. 34 1/2″ HIGH.1 NEW VDB273418 12.6 VDB333421 13. or on 18″ deep • • FFDL FFDR • + Not available on 12″ wide Construction Upgrades 18” 341/2” 21” 3/4X PE • • • 11. 34 1/2″ HIGH.4 VDB213421 12.7 VDB123421 7. or 36” VDB243418 VDB273418 VDB303418 VDB333418 VDB363418 341/2” VDB243421 VDB273421 VDB303421 VDB333421 VDB363421 18” or 21” Cubic Feet NEW 12”. Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO ID CFP CFRMO • • INVFRM MIP • CND DRWTK EXB EXL EXR FB • • • • RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • FFDL FFDR • Construction Upgrades APC • 3/4X PE VANITY CABINETS VANITY COSMETIC CENTER DRAWER BASE.3 NEW VDB303418 13. 2014 .8 VDB363421 15.9 NEW VDB153418 7.5 NEW VDB213418 9. 30”.8 VDB303421 12.2 NEW VDB183418 8.8 NEW VDB243418 10.8 NEW VDB363418 16.1 VDB273421 11.4 VDB243421 14. 15”. 21″ DEEP APC • Effective March 17. 18″ or 21″ DEEP VDB123418 VDB153418 VDB183418 VDB213418 VDB123421 VDB153421 VDB183421 VDB213421 18” or 21” Model VDB123418 5. 30”. 18”.9 NEW 4VDB153418 7. 21″ DEEP Interior Width 33/4” 9” 341/2” VANITY CABINETS 21” APC 3/4X PE • • • 4.7 4VDB123421 6.2 NEW 4VDB183418 8. 15”.9 24”. 27”.5 NEW 4VDB213418 9. 18″ or 21″ DEEP 12”.2 VANITY FOUR DRAWER BASE.8 NEW 4VDB243418 10. • Addison door panels feature a unique raised profile due to the narrow panel width.2 4VDB243421 12. Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • CCO CFNTO CFP CFRMO INVFRM MIP • EXL EXR FB • • • TKP VTK DRWTK RD RECTKALL RECTKL RECTKBK RECTKR • ID EXB CND •* • FFDL FFDR • *RECTKALL not available Pull-out Interior Depth 19” Construction Upgrades APC • 3/4X PE • Effective March 17. or on 18″ deep • • FFDL FFDR • + Not available on 12″ wide Construction Upgrades VANITY PULL-OUT. 34 1/2″ HIGH. 33”. 2014 .9 VP93421 • All styles feature a natural finish full extension wood pull-out with adjustable shelves and chrome rail sides (Smart Stop not included).0 4VDB153421 8.6 NEW 4VDB333418 14.2 4VDB303421 15. or 21” 4VDB123418 4VDB153418 4VDB183418 4VDB213418 341/2” 338 Cubic Feet 4VDB123421 4VDB153421 4VDB183421 4VDB213421 4VDB243418 4VDB273418 4VDB303418 4VDB333418 4VDB363418 341/2” 18” or 21” 4VDB243421 4VDB273421 4VDB303421 4VDB333421 4VDB363421 Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • •+ • CCO CFNTO CND DRWTK EXB EXL EXR FB •* • • • MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • CFP CFRMO • • INVFRM *Not available on 12″ and 15″ wide.8 4VDB363421 18.8 NEW 4VDB363418 16.Model Model Cubic Feet NEW 4VDB123418 5.7 18” or 21” 4VDB183421 9. or 36” 4VDB213421 11.7 4VDB273421 13. 34 1/2″ HIGH.0 NEW 4VDB273418 12.3 NEW 4VDB303418 13.3 4VDB333421 16. 2VSD57 cabinets have 30″ wide space between drawers for sink.6 2VSD57/603221 27.6 2VSD453221 21.4 2VSD543221 25. 2014 .6 NEW 42”. 32″ HIGH.0 339 32” NEW 18” or 21” 2VSD423218 2VSD453218 2VSD483218CS 2VSD423221 2VSD453221 2VSD483221CS NEW • • • • • FP 32” 2VSD36/2VSD42/2VSD48 cabinets have 21″ wide space between drawers for sink.9 2VSD483221 22.9 2VSD57/603218FP 25.6 2VSD423221 20.0 2VSD423218 17. 2VSD57/603221 may be trimmed 1 1/2″ per side.9 2VSD57/603218 25.1 2VSD57/603221FP 27. or 48” FP Cubic Feet 2VSD483218 19. 45”. 2VSD54/2VSD60 cabinets have 27″ wide space between drawers for sink.Model VANITY SINK DRAWER BASE.2 2VSD603221FP 28.5 2VSD483218CS 19.9 2VSD543218FP 23.3 2VSD483221CS 22. 2VSD45 cabinets have 24″ wide space between drawers for sink. Custom Modifications 18” or 21” 12” or 15” 54” or 60” CBO CCO CFNTO CFP CFRMO CND DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • • • •+ • • • •* FPEB FTK FTKAV FTKFV ID TKP VTK •* • • • INVFRM MIP RD • • *Not available on 2VSD57/60 and 2VSD57/60FP 27” 12” or 15” RECTKALL RECTKL RECTKBK RECTKR • • • + Only available on 2VSD363221 Construction Upgrades FP APC 3/4X PE • • • 32” VANITY CABINETS 2VSD483218 2VSD483221 AUTHL AUTHR 18” or 21” 2VSD543218FP 2VSD603218FP 2VSD543221FP 2VSD603221FP 54” or 60” 27” 12” or 15” 12” 32” 32” 18” or 21” 2VSD543218 2VSD603218 2VSD543221 2VSD603221 60” 57” 30” 12” 60” 57” 30” 12” or 15” 12” 12” FP 32” 18” or 21” 18” or 21” 2VSD57/603218FP 2VSD57/603221FP 2VSD57/603218 2VSD57/603221 Effective March 17. 18″ or 21″ DEEP Cubic Feet 2VSD363218 15.2 2VSD603221 28.4 2VSD543221FP 25.1 2VSD363221 17.5 2VSD453218 18.4 Model NEW 36” 21” = False Panel FP 32” 18” or 21” 2VSD363218 2VSD363221 2VSD543218 23.2 2VSD603218FP 24.2 2VSD603218 24. 9 NEW 2VSD483418CS 21.5 NEW 2VSD603421FP 30.2 18” or 21” 2VSD363418 2VSD363421 42”.0 2VSD57/603421 27.2 NEW 2VSD603418 26.8 2VSD543421 24.0 NEW 2VSD543418FP 23.0 2VSD483421 21. 34 1/2″ HIGH.5 NEW 2VSD603418FP 26. 2VSD54/2VSD60 cabinets have 27″ wide space between drawers for sink.1 36” 21” = False Panel FP 341/2” 340 Cubic Feet NEW 2VSD423418 18.Model VANITY SINK DRAWER BASE.2 2VSD57/603418 25. 18″ or 21″ DEEP NEW Cubic Feet Model 2VSD363418 16.7 2VSD363421 16. 2VSD57 cabinets have 30″ wide space between drawers for sink. 2VSD45 cabinets have 24″ wide space between drawers for sink. Custom Modifications FP 341/2” 18” or 21” AUTHL AUTHR CBO •* CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV ID •* • • • INVFRM MIP RD • • *Not available on 2VSD57/60 and 2VSD57/60FP 2VSD483418 2VSD483421 27” VANITY CABINETS 12” or 15” EXB EXL EXR FB FFDL FFDR •+ • • • •* TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • + Only available on 2VSD363421 Construction Upgrades 12” or 15” 54” or 60” DRWTK APC 3/4X PE • • • FP 341/2” 18” or 21” 2VSD543418FP 2VSD603418FP 2VSD543421FP 2VSD603421FP 54” or 60” 12” or 15” 60”57” 30” 27” 12” or 15” 341/2” 60” 57” 30” 12” 12” 12” 12” FP 341/2” 341/2” 18” or 21” 18” or 21” 18” or 21” 2VSD543418 2VSD543421 2VSD603418 2VSD603421 2VSD57/603418FP 2VSD57/603421FP 2VSD57/603418 2VSD57/603421 Effective March 17.9 NEW 2VSD603421 30. 2VSD57/603421 may be trimmed 1 1/2″ per side.1 2VSD483418 21.1 NEW 2VSD57/603418FP 25.1 NEW 2VSD543418 23.3 2VSD453421 22.5 2VSD483421CS 21.7 2VSD423421 19.3 2VSD543421FP 24. or 48” NEW FP 341/2” NEW 18” or 21” 2VSD423418 2VSD453418 2VSD483418CS • • • • • 2VSD423421 2VSD453421 2VSD483421CS 48” 2VSD36/2VSD42/2VSD48 cabinets have 21″ wide space between drawers for sink. 45”.9 2VSD57/603421FP 27. 2014 .6 NEW 2VSD453418 19. 30”.1 VSD243221 DL or DR 11.1 VSD363221 DL or DR 17.9 VSD423221 DL or DR 20. or 48” NEW 32” NEW 18” or 21” 9” Frame Opening VSD423218 DL or DR VSD453218 DL or DR VSD483218 DL or DR VSD423221 DL or DR VSD453221 DL or DR VSD483221 DL or DR 54” or 60” FP 32” 10. 18″ or 21″ DEEP Cubic Feet . 27”.Model 24”. and 48″ widths.1 VSD603218 24.6 VSD333221 DL or DR 16. but standard on all other widths. • CFP is available on 42″.4 VSD273218 DL or DR 11. 32″ HIGH.5 VSD483221 DL or DR 22.9 VSD543218 22.4 341 • DL or DR indicates drawer location. or 33” = False Panel 32” 18” or 21” 9” Frame Opening VSD243218 DL or DR VSD273218 DL or DR VSD303218 DL or DR VSD333218 DL or DR VSD243221 DL or DR VSD273221 DL or DR VSD303221 DL or DR VSD333221 DL or DR 36” FP 32” 18” or 21” 9” Frame Opening VSD363218 DL or DR VSD363221 DL or DR 42”.7 VSD543221 25.9 VSD273221 DL or DR 13.3 VSD303221 DL or DR 14. 45”.7 VSD333218 DL or DR 14.3 VSD603221 28.7 VSD303218 DL or DR 12.1 VSD363218 DL or DR 15. Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND STD • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 42″. 45″. 2014 VANITY CABINETS VANITY SINK DRAWER BASE. or on 18″ deep 9” or 15” Frame Opening 18” or 21” VSD543218 VSD603218 VSD243218 DL or DR Construction Upgrades APC 3/4X PE • • • VSD543221 VSD603221 Effective March 17. 45″.5 VSD453218 DL or DR 18. 54″ and 60″ wide. 48″.5 VSD483218 DL or DR 19.4 VSD423218 DL or DR 17.1 VSD453221 DL or DR 18. 45″. 54″ and 60″ wide.2 VSD453421 DL or DR 21. 45”. 2014 . 9” Frame Opening VSD423418 DL or DR VSD453418 DL or DR VSD483418 DL or DR Custom Modifications VSD423421 DL or DR VSD453421 DL or DR VSD483421 DL or DR 54” or 60” FP AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND STD • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 42″.3 NEW VSD543421 27.5 NEW VSD333418 DL or DR 14. 18″ or 21″ DEEP 24”. or on 18″ deep Construction Upgrades 341/2” 3/4X PE • • • 9” or 15” Frame Opening 18” or 21” VSD543418 VSD603418 APC VSD543421 VSD603421 Effective March 17. 45″.1 VSD423421 DL or DR 19.Model VANITY SINK DRAWER BASE.9 NEW VSD543418 23.8 VSD333421 DL or DR 17.9 NEW VSD483418 DL or DR 21. 27”. and 48″ widths.1 VSD303421 DL or DR 13. or 33” = False Panel NEW VSD243418 DL or DR 10.2 VSD603421 27. 34 1/2″ HIGH.7 NEW VSD603418 26.7 VSD243421 DL or DR 11.0 VSD363421 DL or DR 16.6 NEW VSD453418 DL or DR 19. or 48” 341/2” VANITY CABINETS 18” or 21” • DL or DR indicates drawer location.3 VSD483421 DL or DR 21.5 NEW VSD423418 DL or DR 18.2 FP 341/2” 342 18” or 21” 9” Frame Opening VSD243418 DL or DR VSD273418 DL or DR VSD303418 DL or DR VSD333418 DL or DR VSD243421 DL or DR VSD273421 DL or DR VSD303421 DL or DR VSD333421 DL or DR Cubic Feet NEW 36” FP 341/2” 18” or 21” 9” Frame Opening VSD363418 DL or DR VSD363421 DL or DR 42”.9 NEW VSD273418 DL or DR 12.2 NEW VSD303418 DL or DR 13.1 VSD363418 DL or DR 16. 30”. but standard on all other widths. • CFP is available on 42″.1 VSD273421 DL or DR 14. 48″. 3 VSD303221FP DL or DR 14. 2014 VANITY CABINETS 18” or 21” NEW .9 VSD543218FP 22.3 VSD603221FP 28. 45″.4 VSD423218FP DL or DR 17.7 VSD303218FP DL or DR 12.1 VSD243221FP DL or DR 11.4 343 36” FP 32” 18” or 21” 9” Frame Opening VSD363218FP DL or DR VSD363221FP DL or DR 42”. or 48” NEW FP 32” • DL or DR indicates drawer location. 18″ or 21″ DEEP 24”.Model VANITY SINK DRAWER BASE with FALSE PANELS. 54″ and 60″ wide.7 VSD543221FP 25.5 VSD483218FP DL or DR 19.3 VSD483221FP DL or DR 22. 48″.4 VSD273218FP DL or DR 11. 32″ HIGH. 45”.1 VSD453221FP DL or DR 21.1 VSD363218FP DL or DR 15.9 VSD273221FP DL or DR 13. 27”. 30”.5 VSD453218FP DL or DR 18. or 33” = False Panel FP 32” 18” or 21” 9” Frame Opening VSD243218FP DL or DR VSD273218FP DL or DR VSD303218FP DL or DR VSD333218FP DL or DR VSD243221FP DL or DR VSD273221FP DL or DR VSD303221FP DL or DR VSD333221FP DL or DR Cubic Feet VSD243218FP DL or DR 10.1 VSD603218FP 24. or on 18″ deep Construction Upgrades 32” 18” or 21” AUTHL AUTHR 9” or 15” Frame Opening APC 3/4X PE • • • VSD543221FP VSD603221FP Effective March 17.6 VSD333221FP DL or DR 16.9 VSD423221FP DL or DR 20.7 VSD333218FP DL or DR 14.1 VSD363221FP DL or DR 17. 9” Frame Opening VSD423218FP DL or DR VSD453218FP DL or DR VSD483218FP DL or DR Custom Modifications VSD423221FP DL or DR VSD453221FP DL or DR VSD483221FP DL or DR 54” or 60” FP FP FP VSD543218FP VSD603218FP CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND STD • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 42″. 45”.1 VSD423421FP DL or DR 22.6 NEW VSD453418FP DL or DR 19.9 NEW VSD483418FP DL or DR 21.2 NEW VSD303418FP DL or DR 13. or 33” = False Panel NEW VSD243418FP DL or DR 10.8 VSD333421FP DL or DR 17.1 VSD273421FP DL or DR 14.9 NEW VSD543418FP 22.1 VSD303421FP DL or DR 13.1 VSD363418FP DL or DR 16.5 NEW VSD333418FP DL or DR 14. or on 18″ deep FP FP FP Construction Upgrades APC 3/4X PE • • • 341/2” 9” or 15” Frame Opening 18” or 21” VSD543418FP VSD603418FP VSD543421FP VSD603421FP Effective March 17.7 VSD243421FP DL or DR 11.9 NEW VSD273418FP DL or DR 12. 48″. 34 1/2″ HIGH.0 VSD363421FP DL or DR 16.3 NEW VSD543421FP 25. 30”. 18″ or 21″ DEEP 24”. 27”. Custom Modifications VANITY CABINETS 18” or 21” 9” Frame Opening VSD423418FP DL or DR VSD453418FP DL or DR VSD483418FP DL or DR VSD423421FP DL or DR VSD453421FP DL or DR VSD483421FP DL or DR 54” or 60” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND STD • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB FFDL FFDR •* • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • • *Not available on 42″.8 VSD483421FP DL or DR 21.5 NEW VSD423418FP DL or DR 18.3 VSD603421FP 27. 2014 .1 NEW VSD603418FP 26. 54″ and 60″ wide.Model VANITY SINK DRAWER BASE with FALSE PANEL.2 FP 341/2” 344 18” or 21” 9” Frame Opening VSD243418FP DL or DR VSD273418FP DL or DR VSD303418FP DL or DR VSD333418FP DL or DR VSD243421FP DL or DR VSD273421FP DL or DR VSD303421FP DL or DR VSD333421FP DL or DR Cubic Feet NEW 36” FP 341/2” 18” or 21” 9” Frame Opening VSD363418FP DL or DR VSD363421FP DL or DR 42”. 45″.8 VSD453421FP DL or DR 22. or 48” FP 341/2” • DL or DR indicates drawer location. 2 VCC483421FP DL or DR 21. 34 1/2″ HIGH. 2014 VANITY CABINETS Construction Upgrades . 18″ or 21″ DEEP 54” or 60” 21” 3/4X PE • • • VS3D543418 23. 34 1/2″ HIGH.3 VS3D603221 28. • Includes door rack with cord storage.1 VS3D603218 24.9 • DL or DR indicates drawer location. Custom Modifications FP 341/2” 21” Cubic Feet 203/4” 9 1 /4 ” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO 3/4X CFRMO CND STD • • INVFRM MIP RD • DRWTK EXB EXL EXR FB FFDL FFDR • • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR 345 • • • DRWTK EXB EXL EXR FB FFDL FFDR • • • • TKP VTK PE • VANITY SINK THREE DRAWER BASE.2 VS3D603421 30.1 FP 21” Custom Modifications FP 341/2” 9” or 15” Frame Opening 18” or 21” APC AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV • • • CCO CFNTO ID CFP CFRMO CND • • • INVFRM MIP RD • • RECTKALL RECTKL RECTKBK RECTKR • • • Construction Upgrades APC 3/4X PE • • • Effective March 17.4 VS3D543221 25. • Top drawer features two-tiered wood organizer.Model VANITY COSMETIC CENTER SINK DRAWER BASE with FALSE PANEL.7 VS3D603418 26.3 VS3D543421 27. 32″ HIGH.0 FP 21” Custom Modifications FP 32” 9” or 15” Frame Opening 18” or 21” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND • • • INVFRM RECTKALL RECTKL RECTKBK RECTKR MIP RD • • • • DRWTK EXB EXL EXR FB FFDL FFDR • • • • TKP VTK • NEW VANITY SINK THREE DRAWER BASE. 18″ or 21″ DEEP 54” or 60” ID CFP Construction Upgrades APC NEW CFNTO 21” • VS3D543218 22. 21″ DEEP 42” or 48” 24” or 30” 15” 3 3 /4 ” 15” Frame Opening VCC423421FP DL or DR 19. 6VSD54 drawer stacks are 15″ wide.7 6VSD543221 25.8 6VSD483218 19.4 9” 32” 346 9” Frame Opening 18” or 21” NEW 9” Frame Opening NEW 6VSD423218 L or R 6VSD423221 L or R 9” 48” 27” 9” • • • • 32” Custom Modifications 9” Frame Opening 18” or 21” 6VSD483218 6VSD483221 6VSD42 and 6VSD48 drawer stacks are 12″ wide. 9” Frame Opening 54” or 60” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND • • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades 27” APC 3/4X PE • • • 32” 12” or 15” Frame Opening 18” or 21” 6VSD543221 6VSD603221 VANITY CABINETS 6VSD543218 6VSD603218 12” or 15” Frame Opening Effective March 17. 2014 . 6VSD60 drawer stacks are 18″ wide. 42″ wide cabinets have a sink opening of only 21″ instead of standard 27″.3 6VSD603221 28.3 NEW 6VSD423221 L or R 19.1 6VSD603218 24. 32″ HIGH. 18″ or 21″ DEEP 9” 42” 21” Cubic Feet NEW 6VSD423218 L or R 17.9 6VSD543218 22.Model VANITY SINK DRAWER BASE with SIX DRAWERS.9 6VSD483221 22. 3 NEW 6VSD543421 27.6 NEW 6VSD423421 L or R 21.2 9” 9” 341/2” 9” Frame Opening 18” or 21” 9” Frame Opening 6VSD423418 L or R 6VSD423421 L or R 48” 27” • • • • 9” 9” 347 6VSD42 and 6VSD48 drawer stacks are 12″ wide. 34 1/2″ HIGH. 6VSD54 drawer stacks are 15″ wide.2 6VSD603421 27.9 NEW 6VSD543418 23. 42″ wide cabinets have a sink opening of only 21″ instead of standard 27″. 6VSD60 drawer stacks are 18″ wide.3 NEW 6VSD483418 21. Custom Modifications 341/2” 9” Frame Opening 18” or 21” 9” Frame Opening AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND • • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades 6VSD483418 6VSD483421 APC 3/4X PE • • • 54” or 60” 27” 341/2” 12” or 15” Frame Opening 6VSD543418 6VSD603418 12” or 15” Frame Opening VANITY CABINETS 18” or 21” 6VSD543421 6VSD603421 Effective March 17.Model VANITY SINK DRAWER BASE with SIX DRAWERS.1 6VSD483421 21. 18″ or 21″ DEEP 42” 21” Cubic Feet NEW 6VSD423418 L or R 18.7 NEW 6VSD603418 26. 2014 . Custom Modifications 9” Frame Opening 18” or 21” 9” Frame 6VSD483218FP Opening 6VSD483221FP 54” or 60” AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND • • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades 27” FP APC 3/4X PE • • • 32” 12” or 15” Frame Opening 18” or 21” 12” or 15” Frame Opening VANITY CABINETS 6VSD543218FP 6VSD543221FP 6VSD603218FP 6VSD603221FP Effective March 17.9 6VSD483221FP 22. 2014 .3 NEW 6VSD423221FP L or R 19.7 6VSD543221FP 25. 18″ or 21″ DEEP 9” 42” 21” NEW 6VSD423218FP L or R 17.Model VANITY SINK DRAWER BASE with SIX DRAWERS & FALSE PANEL.1 6VSD603218FP 24. 32″ HIGH.9 6VSD543218FP 22.3 6VSD603221FP 28.4 9” FP 32” 348 9” Frame Opening 18” or 21” NEW 9” Frame Opening NEW 6VSD423218FP L or R 6VSD423221FP L or R 9” Cubic Feet 48” 27” 9” • • • • FP 32” 6VSD42 and 6VSD48 drawer stacks are 12″ wide. 42″ wide cabinets have a sink opening of only 21″ instead of standard 27″.8 6VSD483218FP 19. 6VSD54 drawer stacks are 15″ wide. 6VSD60 drawer stacks are 18″ wide. 1 6VSD483421FP 21.9 8VSD603421 27. 18″ or 21″ DEEP 9” 42” 21” Cubic Feet NEW 6VSD423418FP L or R 18.Model VANITY SINK DRAWER BASE with SIX DRAWERS & FALSE PANEL.3 8VSD483421 21. 18″ or 21″ DEEP 48” or 60” 27” NEW 8VSD483418 21.1 NEW 8VSD603418 26. 6VSD60 drawer stacks are 18″ wide. • 8VSD60 drawer stacks are 18″ wide. 34 1/2″ HIGH. 6VSD54 drawer stacks are 15″ wide. 34 1/2″ HIGH.2 VANITY CABINETS 6VSD543418FP 6VSD543421FP 6VSD603418FP 6VSD603421FP • 8VSD48 drawer stacks are 12″ wide. 341/2” Custom Modifications 9” or 15” Frame Opening 18” or 21” 9” or 15” Frame Opening AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND • • • INVFRM MIP RD • • RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades APC 3/4X PE • • • Effective March 17. • All have 27″ wide space between drawers for sink.2 6VSD603421FP 27.7 NEW 6VSD603418FP 26. 2014 .9 NEW 6VSD543418FP 23.2 9” FP 341/2” 9” Frame Opening 18” or 21” 9” Frame Opening 6VSD423418FP L or R 6VSD423421FP L or R 48” 27” • • • • 9” 9” FP 6VSD42 and 6VSD48 drawer stacks are 12″ wide.3 NEW 6VSD543421FP 27. Custom Modifications 341/2” 9” Frame Opening 18” or 21” 6VSD483418FP 6VSD483421FP 349 9” Frame Opening AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND • • • INVFRM DRWTK EXB EXL EXR FB • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR MIP RD • • • • DRWTK EXB EXL EXR FB • • • TKP VTK FFDL FFDR • Construction Upgrades 54” or 60” APC 3/4X PE • • • 27” FP 341/2” 12” or 15” Frame Opening 18” or 21” 12” or 15” Frame Opening VANITY SINK DRAWER BASE with EIGHT DRAWERS. 42″ wide cabinets have a sink opening of only 21″ instead of standard 27″.6 NEW 6VSD423421FP L or R 21.3 NEW 6VSD483418FP 21. • 3/8″ thick. • All have 27″ wide space between drawers for sink.Model VANITY SINK DRAWER BASE with EIGHT DRAWERS & FALSE PANEL.3 VACSF L or R • Edges are angled at 45°. 18 or 21″ DEEP 48” or 60” 27” NEW 8VSD483418FP 21. • Requires sink bottom for field installation. 18” or 21” Adjacent Cabinet Depth 32” 21″ 18″ Wall Width Frame Maximum Sink Width Maximum Sink Depth 33″ x 33″ 30″ x 30″ 17″ 17″ 25 3/4″ 25 3/4″ 22 7/8″ 18 5/8″ Custom Modifications AUTHL AUTHR FPEB CBO CCO FTK FTKAV FTKFV CFNTO ID CFP CFRMO CND STD • • INVFRM MIP RD DRWTK EXB RECTKALL RECTKL RECTKBK RECTKR EXL EXR FB TKP VTK FFDL FFDR VANITY CABINETS Construction Upgrades APC VANITY ANGLE CORNER SINK FRONT BOTTOM 3” 30” or 3 171/4” or 201 / 3/4X PE VACSFB3018 1. • Toekick and toekick retainer shipped unattached from the face frame. Construction Upgrades APC • 3/4X PE • Effective March 17. 4” MODIFICATIONS No modifications available for these products.0 VACSFB3321 1. Order separately. 2014 . FP 341/2” 350 Cubic Feet 9” or 15” Frame Opening 18” or 21” 9” or 15” Frame Opening Custom Modifications AUTHL AUTHR CBO • • • FPEB FTK FTKAV FTKFV ID • • • • CCO CFNTO CFP CFRMO CND • • • INVFRM MIP RD • • DRWTK EXB EXL EXR FB • • • TKP VTK RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • Construction Upgrades VANITY ANGLE CORNER SINK FRONT. • 8VSD60 drawer stacks are 18″ wide.2 • 8VSD48 drawer stacks are 12″ wide.3 8VSD483421FP 21. • Trimmable. 34 1/2″ HIGH.0 • Designed for use with Vanity Angle Corner Sink Front. 32″ HIGH 30” or 33” 17” FP = False Panel APC 3/4X PE • • • 3.9 8VSD603421FP 27.1 NEW 8VSD603418FP 26. Model UNDER COUNTER DRAWER. Drawer front is 3/4″ slab front.6 Cabinet is 4 3/4″ high. 18″ DEEP 24” or 27” 43/4” 18” 23/4” Frame Opening Height UCD2418 UCD2718 • • • • • • UCD2418 2. Drawer box within cabinet is 2″ high. Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV • • • 32” ID CFP CFRMO • INVFRM MIP • • • FFDL FFDR • Construction Upgrades APC • 3/4X PE • Effective March 17. end panels will not be finished.6 UCD3618 2.6 UCD3621 2.6 UCD2721 2. which is designed to accommodate the vanity desk leg. Custom Modifications AUTHL AUTHR 30” or 36” 43/4” 18” 2 3 /4 ” Frame Opening Height Cubic Feet FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFP APC UNDER COUNTER DRAWER.6 UCD3021 2. Reduced depth is available in 3″ increments. end panels will not be finished. Drawer front is 3/4″ slab front. End panels ordered in Distinction will feature non-matching laminate exterior. The frame to end panel offset is 3/4″. Not trimmable.6 UCD2718 2. When ordered in PE or APC. 21″ DEEP 24” or 27” 4 3 /4 ” • • • • • 2 3 /4 ” Frame Opening Height DRWTK ID INVFRM MIP RD • • EXB • • RECTKALL RECTKL RECTKBK RECTKR TKP FB 351 FFDL FFDR VTK Construction Upgrades 3/4X • 21” CND • • UCD3018 UCD3618 CFRMO EXL EXR PE • UCD2421 2.6 Cabinet is 4 3/4″ high. The frame to end panel offset is 3/4″. 16″ DEEP 16” 7. which is designed to accommodate the vanity desk leg. 32″ HIGH. End panels ordered in Distinction will feature non-matching laminate exterior. Custom Modifications AUTHL AUTHR 30” or 36” FPEB 4 3 /4 ” CBO CCO • • FTK FTKAV FTKFV CFNTO CFP ID INVFRM EXB EXL EXR • • CND DRWTK MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • CND DRWTK EXB EXL EXR FB • • • RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • 21” 2 3 /4 ” Frame Opening Height UCD3021 CFRMO FB FFDL FFDR VANITY CABINETS UCD2421 UCD2721 Construction Upgrades APC 3/4X • PE • UCD3621 SPECIAL SIZE VANITY. 4 3/4″ HIGH. When ordered in PE or APC. 2014 .2 MV183216 L or R • MV = mini-vanity.6 UCD3018 2. Not trimmable. Drawer box within cabinet is 2″ high. 4 3/4″ HIGH. 21″ DEEP PE • 9. 16″ DEEP 18” Cubic Feet Custom Modifications AUTHL AUTHR CBO CCO • 341/2” CFP • FPEB FTK FTKAV FTKFV • • • APC 3/4X • NEW CFNTO ID CFRMO MIP EXL EXR FB • • • TKP VTK DRWTK RD RECTKALL RECTKL RECTKBK RECTKR • INVFRM EXB CND • • • DRWTK EXB EXL EXR FB • • • • TKP VTK FFDL FFDR • Construction Upgrades 16” 352 7. If ordered in Arch/Cathedral door style.Model SPECIAL SIZE VANITY. 15″ deep adjustable shelves indicated by light dotted lines are included. 34 1/2″ HIGH. Tall non-mitered doors will have two center panels with cross rail. VANITY HAMPER.7 MV183416 L or R • MV = mini vanity. 32″ HIGH. top door will be Arch/Cathedral and lower door will be Square. Custom Modifications AUTHL AUTHR 84” CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV • • • ID CFP CFRMO MIP • EXL EXR FB • • • TKP VTK • • DRWTK RD RECTKALL RECTKL RECTKBK RECTKR • INVFRM EXB CND • FFDL FFDR Construction Upgrades 21” APC • 3/4X PE • Effective March 17.0 LC188421 L or R LINEN CLOSET • • • • Upper section features a 5″ deep chrome door rack.5 VBH183421 L or R Custom Modifications 18” 341/2” AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV • • • ID INVFRM MIP RD • RECTKALL RECTKL RECTKBK RECTKR • • FFDL FFDR • VANITY CABINETS Construction Upgrades APC 3/4X PE • • • 21” 23.9 VH183221FH L or R Custom Modifications 18” 32” AUTHL AUTHR CBO • CCO CFNTO CFP CFRMO CND • • • • • • FPEB FTK FTKAV FTKFV • • • ID INVFRM MIP RD • RECTKALL RECTKL RECTKBK RECTKR • • DRWTK EXB EXL EXR FB • • • • TKP VTK FFDL FFDR • Construction Upgrades APC 21” NEW 3/4X • VANITY HAMPER with DRAWER. 21″ DEEP PE • 8. packaged separately. 2014 . 34 1/2″ HIGH. Custom Modifications 84” AUTHL AUTHR CBO • CCO CFNTO • • • FPEB FTK FTKAV FTKFV ID • • • • CFP CND DRWTK EXB EXL EXR FB • • • • MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • • • CFRMO • INVFRM • FFDL FFDR Construction Upgrades APC • 3/4X PE • Effective March 17. 84″ TALL. Vanity utilities designed to be used with 32″ tall vanities.3 LT218421 L or R 26. Shelves indicated by solid lines are fixed. Includes full-extension removable chrome pull-out hamper with removable cloth liner. If ordered in Arch/Cathedral door style. 2014 VANITY CABINETS APC . 21″ DEEP 21” PE • 23. top door will be Arch/Cathedral and lower door will be Square.8 • If ordered in Arch/Cathedral door style.4 LT188421 L or R 23. Upper section features a 5″ deep chrome door rack. Tall non-mitered doors will have two center panels with cross rail. Custom Modifications AUTHL AUTHR 18” or 21” CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV ID • • • • CFP CND DRWTK EXB EXL EXR FB •* • • • MIP RD RECTKALL RECTKL RECTKBK RECTKR TKP VTK • • • • CFRMO • INVFRM • FFDL FFDR *Not available on 18″ deep Construction Upgrades 3/4X • VANITY UTILITY. packaged separately.3 LT218418 L or R 23.0 LCRH188421 L or R • • • • • • Hamper size is 19 3/8″ high x 14 3/4″ wide x 18″ deep. packaged separately. top door will be Arch/Cathedral and lower doors will be Square. • Tall non-mitered doors will have two center panels with cross rail. Custom Modifications 84” AUTHL AUTHR 21” CBO CCO CFNTO • • • FPEB FTK FTKAV FTKFV • • • ID CFP CFRMO MIP EXL EXR FB • • • TKP VTK • • DRWTK RD RECTKALL RECTKL RECTKBK RECTKR • INVFRM EXB CND • • FFDL FFDR 353 Construction Upgrades APC 3/4X • LINEN STORAGE CABINET 18” or 21” 84” PE • LT188418 L or R 20. top door will be Arch/Cathedral and lower doors will be Square.Model LINEN CLOSET with REMOVABLE HAMPER Cubic Feet 23. If ordered in Arch/Cathedral door style.0 VU188421 L or R • • • • • Lower door section is drilled to accept adjustable shelf. 15″ deep adjustable shelves indicated by light dotted lines are included. Kitchen utilities should be used for 34 1/2″ vanity applications. Shelves indicated by light dotted lines are included. Effective March 17.4 2 3 /8 ” 35” 18”. Cherry. bottom and adjustable shelves are plywood. Interior cabinet case has plywood end panels. MODIFICATIONS 3 /4 ” 11/2” • • • • 191/2”. Visible dimensions are 18 15/16″ wide x 26 15/16″ high.0 W24306 4. and Maple painted White/Cashmere. or 24” W12306 L or R W15306 L or R W18306 L or R W24306 L or R 30” 6” NEW ALF PE CG MD • STD W12306 L or R 2. When ordered in APC.0 Custom Modifications AUTHL AUTHR CBO CCO CFNTO • • • FTK FTKAV FTKFV W24306 FPEB ID CFP CFRMO 3/4X • 6” RD RECTKALL RECTKL RECTKBK RECTKR INVFRM MIP FFDL FFDR • Construction Upgrades APC DRWTK • • 30” CND Decorative Door Options PE ALF CG MD • •† • • † VANITY CABINETS Not available on 24″ wide with butt doors (W24306) VANITY MIRROR VM2135 5.4 211/4”. back. VM3335: 33 1/4″ wide x 35″ high. Cabinet features factory applied 3/4″ matching veneer over furniture board core end panels. 18”. Custom Modifications AUTHL AUTHR 354 FPEB CBO CCO CFNTO • • • FTK FTKAV FTKFV ID CFP CFRMO CND DRWTK EXB RD RECTKALL RECTKL RECTKBK RECTKR EXL EXR • INVFRM FB FFDL FFDR STD MIP TKP VTK EXB EXL EXR FB • • • TKP VTK • Decorative Door Options Construction Upgrades APC 3/4X • VANITY WALL. 271/4”. and towel rack underneath. 2014 . 6″ DEEP 12”. top. or 311/2” No modifications available for these products.6 W18306 L or R 3. Moulding included on vanity mirror is not a standard moulding. or 30” Available in Maple. VM2135: 21 1/4″ wide x 35″ high. 1 fixed shelf. Visible dimensions are 24 15/16″ wide x 26 15/16″ high.8 VWTB24 VANITY WALL TOWEL BAR 251/2” Cubic Feet • • • • • 9” 36” Includes 2 adjustable interior shelves. Mirror glass is beveled. VM2735: 27 1/4″ wide x 35″ high. Total cabinet width is 25 1/2″. or 331/4” VM2735 5. Includes two installed metal hanging hooks on back.Model 6.2 W15306 L or R 2. 251/2”. 15”. Visible dimensions are 12 15/16″ wide x 26 15/16″ high.4 VM3335 5. SWLCRM8 is similar. 24”. Cabinet has butt doors.1 W24306 L or R 4. no center stile. 30″ HIGH. Unit can be surface mounted or recessed. 2014 VANITY CABINETS 267/8” TV30 . and bottoms.5 MC16 is 26 7/8″ high x 15 3/4″ wide x 4 9/16″ deep. Cut out dimensions are 25 5/8″ high x 34 11/16″ wide x 4″ deep. Natural Maple laminate interior. 3/4″ laminated furniture board shelves. tops.5 TV48 8. will not feature sand-through characteristics. Finished exterior. TV36: 26 7/8″ high x 36″ wide x 4 9/16″ deep. 3/4″ laminated furniture board shelves. Unit can be surface mounted or recessed. Matching cabinet doors not available. tops. 355 Custom Modifications AUTHL AUTHR FPEB CBO CCO CFNTO • • • FTK FTKAV FTKFV ID CFP CFRMO CND DRWTK EXB RD RECTKALL RECTKL RECTKBK RECTKR EXL EXR • INVFRM MIP FB FFDL FFDR STD TKP VTK EXL EXR FB • Construction Upgrades APC 3/4X PE STD TRI-VIEW MEDICINE CABINET 49/16” TV30: 26 7/8″ high x 30″ wide x 4 9/16″ deep. Finished exterior. Face frame has a profiled inside and outside edge. Door of cabinet is glass mirror. will not feature sand-through characteristics. and bottoms.5 Cabinet has wood frame. Cut out dimensions are 25 5/8″ high x 14 7/16″ wide x 4″ deep. Face frame has a profiled inside and outside edge. Custom Modifications AUTHL AUTHR FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFP CFRMO CND DRWTK EXB RD RECTKALL RECTKL RECTKBK RECTKR • ID INVFRM MIP FFDL FFDR STD TKP VTK • Construction Upgrades APC 3/4X PE STD Effective March 17. Cut out dimensions are 25 5/8″ high x 28 11/16″ wide x 4″ deep. White styles have White interior. If ordered with Heirlooming Technique. • • • • • • • • • 5. TV48: 26 7/8″ high x 48″ wide x 4 9/16″ deep. If ordered with Heirlooming Technique.4 TV36 6. Natural Maple laminate interior. White styles have White interior. 1/2″ plywood ends. Cabinet has wood frame.SINGLE DOOR MEDICINE CABINET • • • • • • • • • • • • 16” 267/8” 49/16” Model Cubic Feet MC16 2. Door of cabinet is glass mirror. 1/2″ plywood ends. Cut out dimensions are 25 5/8″ high x 46 11/16″ wide x 4″ deep. Cut out dimensions are 31 3/8″ high x 46 11/16″ wide x 4″ deep. TMLC48 has 6 lights. Natural Maple laminate interior. Finished exterior. Face frame has a profiled inside and outside edge.1 TMLC4832 8. 3/4″ laminated furniture board shelves. Cut out dimensions are 31 3/8″ high x 28 11/16″ wide x 4″ deep. Cabinet has wood frame. If ordered with Heirlooming Technique. • • • • • • • • • • • Cubic Feet Effective March 17. Cut out dimensions are 31 3/8″ high x 34 11/16″ wide x 4″ deep. 1/2″ plywood ends. tops. Contemporary light bars require G-40 globe light bulbs. Custom Modifications AUTHL AUTHR FPEB CBO CCO • • FTK FTKAV FTKFV CFNTO CFP CFRMO CND DRWTK EXB RD RECTKALL RECTKL RECTKBK RECTKR EXL EXR • ID INVFRM MIP FB FFDL FFDR STD TKP VTK • Construction Upgrades APC 3/4X PE STD VANITY CABINETS TMLC30 has 4 lights. Door of cabinet is glass mirror. TMLC36 has 5 lights. Bulbs not included. will not feature sand-through characteristics. White styles have White interior. TMLC48: 32 1/2″ high x 48″ wide x 4 9/16″ deep.Model TRI-VIEW MEDICINE CABINET LIGHTED with CHROME FACE PLATE 321/2” 356 49/16” TMLC30: 32 1/2″ high x 30″ wide x 4 9/16″ deep. 2014 .1 Only available with contemporary light bar.6 TMLC3632 7. Unit can be surface mounted or recessed. TMLC3032 5. TMLC36: 32 1/2″ high x 36″ wide x 4 9/16″ deep. and bottoms. 2014 . will not feature Rustic characteristics. • 3/8″ thick. 39” 42”. 33” 36”.e. F6R F3R SPACE FILLERS 3” 3” CF330 CF333 • S96 is 1/4″ or 1/2″ thick. • TF3120FH available in Maple and Cherry only. 60” 791/2” 821/2” 851/2” 881/2” 911/2” 96” or 120” 3/4” 6″ WIDE FILLERS F630 F633 F636 F354 30”. • When ordered with Rustic Alder door styles. 5 day Express Response not available. • Finished on front and all edges (backs are not finished). 60” 791/2” 821/2” 851/2” 881/2” 911/2” 96” or 120” 3/4” F357 F6 F660 F336 F339 F342 F348 F351 F3 MODEL 6” F333 3” DESCRIPTION F639 F642 F648 F651 F654 F360 TF684 TF384 TF687 TF387 TF690 TF390 TF693 TF393 TF696 TF396 TF696FH TF396FH NEW NEW TF3120FH TF6120FH • 3/4″ thick. • When ordered with Rustic Alder door styles. 54” 57”. • Finished on front and all edges (backs are not finished). i. Natural Maple laminated furniture board. will not feature Rustic characteristics. • TF6120FH available in Maple and Cherry only. • Designed to fill space between adjacent cabinets. • Finished on front and all edges (backs are not finished). 33” 36”.DESCRIPTION FILLERS MODEL 3″ WIDE FILLERS F330 30”. 48” 51”. • When ordered with Rustic Alder door styles. W1830 butted against side of U188424. 5 day Express Response not available. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 6″ WIDE FILLER RETURN 3″ WIDE FILLER RETURN 357 F657 F3R • Creates a toekick appearance when used with 3″ wide fillers. F6R • Creates a toekick appearance when used with 6″ wide fillers. 48” 51”. Natural Maple laminated furniture board. • 3/4″ thick. 39” 42”. • Finished on front and all edges (backs are not finished). • 3/8″ thick. Finish Techniques Distressing Heirloom Finish Techniques Distressing Heirloom ✓ 1/4” FILLERS 3″ WIDE CORNER FILLER or 1/2” 3/4” CF3 Effective March 17. CF336 CF339 30” 33” 36” 39” or 42” CF342 S96X14 (1/4″ thick) S96X12 (1/2″ thick) 3/4” 96” • 3/4″ thick. will not feature Rustic characteristics. 54” 57”. will not feature Rustic characteristics. Finish Techniques Distressing Heirloom ✓ ✓ • When ordered with Rustic Alder door styles. Finished on front and all edges (backs are not finished). Overlays match door profile and thickness. OVERLAY FILLER.DESCRIPTION MODEL DESCRIPTION MODEL OVERLAY FILLER. will not feature Rustic characteristics. Finish Techniques Distressing Heirloom ✓ ✓ Effective March 17. Overlays for partial overlay door styles will match partial overlay door height.5 (3″ x 34 1/2″) BLVDTFF96 (3″ x 96″) 5” • When ordered with Rustic Alder door styles. 2 1/2″ WIDE OL312 (11 1/2″H) FLUTED/BEADED 3″ WIDE REVERSIBLE FILLERS FBF330 (3″ x 30″) OL315 (14 1/2″H) 21/2 358 3” OL318 (17 1/2″H) 111/2” 141/2” 171/2” 201/2” 23” 24” 27” 28” or 291/2” 31” or 321/2” 34” or 351/2” 37” or 381/2” 40” or 411/2” 79” 82” 85” 88” or 91” OL321 (20 1/2″H) OL324 (23″H) OL327 (27″H) OL330 (28″H or 29 1/2″H) FBF336 (3″ x 36″) 3 /4 ” TFBF396 (3″ x 96″) • When ordered with Rustic Alder door styles. • 2 1/2″ wide overlay fillers can be applied to Wall Message Centers to create custom finished look. • OL330. 6” Finish Techniques Distressing Heirloom ✓ 30” 36” or 96” ANGLED FLUTED/PLAIN 3″ WIDE REVERSIBLE FILLERS BLVDFF30 (3″ x 30″) BLVDFF34. See page 5 for list of full overlay styles. • See page 5 for list of full overlay styles. OL333. 2014 . 3” 3 /4 ” 30” 36” or 96” Finish Techniques Distressing Heirloom ✓ OL333 (31″H or 32 1/2″H) OL336 (34″H or 35 1/2″H) OL339 (37″H or 38 1/2″H) 3/4” OL342 (40″H or 41 1/2″H) OL384 (79″H) OL387 (82″H) FLUTED/BEADED 6″ WIDE REVERSIBLE FILLERS 6” OL390 (85″H) OL393 (88″H) FBF630 (6″ x 30″) FBF636 (6″ x 36″) TFBF696 (6″ x 96″) 3/4” 3/4” OL396 (91″H) VOL332 (27″H) DOL329 (24″H) • All overlay fillers available in full overlay door styles. • Overlays match door profile and thickness. will not feature Rustic characteristics. OL339. • Finished on front and all edges (backs are not finished). 5 1/2″ WIDE OL612 (11 1/2″H) 3 /4 ” OL615 (14 1/2″H) 51/2” OL618 (17 1/2″H) 111/2” 141/2” 171/2” 201/2” 23” 24” 27” 291/2” 321/2” 351/2” 381/2” 411/2” 79” 82” 85” 88” or 91” OL621 (20 1/2″H) 3” Finish Techniques Distressing Heirloom ✓ 3” 30” 341/2” or 96” OL624 (23″H) OL627 (27″H) OL630 (29 1/2″H) 4 1 /4 ” OL633 (32 1/2″H) OL636 (35 1/2″H) OL639 (38 1/2″H) 3/4” OL642 (41 1/2″H) FILLERS OL684 (79″H) OL687 (82″H) OL690 (85″H) OL693 (88″H) OL696 (91″H) VOL632 (27″H) DOL629 (24″H) • • • • All overlay fillers available in full overlay door styles. OL336. OL342 also available in partial overlay door styles. 33” 36”. 54” 57” or 60” W321BCFB W339BCFP Custom Modification Availability 15” W318BCFB W323. 3″ WIDE Wall . • Front and both sides finished. 3″ WIDE (cont’d) Wall . • When Fluted or Beaded Box Column Fillers are ordered with Rustic Alder door styles. 48” 51”. will not feature Rustic characteristics. 48” 51”. • Finished veneer on end panel exterior. • Enclosed top and bottom. 39” 42”. Custom Modification Availability W318BCFF 12”.5BCFP W330BCFP W333BCFP 3” W336BCFP Grain W327. 39” 42”. 15” 18”. 54” 57” or 60” W323. 21” 231/2” 271/2” 30”. 54” 57” or 60” 12”.5BCFF W327. 33” 36”. • Reversible. 15” 18”.Fluted Column 15″ Deep W315BCFB W321BCFF ID • RD • Finish Techniques Distressing Heirloom ✓ Grain W323. 21” 231/2” 271/2” 30”.5BCFF W330BCFF W333BCFF W336BCFF W339BCFF W342BCFF W348BCFF W351BCFF W354BCFF W357BCFF W360BCFF Custom Modification Availability ID • FILLERS 3” RD • Finish Techniques Distressing Heirloom ✓ Effective March 17.5BCFB 3” W360BCFP Wall .5BCFB W330BCFB W333BCFB 359 W336BCFB W339BCFB W342BCFP W342BCFB W348BCFP W348BCFB W351BCFP W351BCFB W354BCFP W354BCFB W357BCFP W357BCFB W360BCFB ID • RD • Finish Techniques Distressing Heirloom ✓ W312BCFF W315BCFF • Available in 1″ depth increments from 6″ to 30″.Plain Column 15″ Deep W312BCFP BOX COLUMN FILLERS.DESCRIPTION MODEL DESCRIPTION MODEL BOX COLUMN FILLERS. 15” 18”.5BCFP Grain W327. may be used on either left or right end. 21” 231/2” 271/2” 30”. • No reveal on filler. • 1/2″ plywood construction.Beaded Column 15″ Deep W312BCFB 15” W315BCFP W318BCFP 15” W321BCFP 12”. 33” 36”. 2014 . 48” 51”. 39” 42”. will not feature Rustic characteristics.Fluted Column 3″ Wide. • 1/2″ plywood construction. • 1/2″ plywood construction. 15″ & 27″ Deep T39015BCFP (15″ Deep) 15” or 27” T39315BCFP (15″ Deep) Grain 84” 87” 90” 93” or 96” T38715BCFB (15″ Deep) T39615BCFP (15″ Deep) T39015BCFB (15″ Deep) T38427BCFP (27″ Deep) T39315BCFB (15″ Deep) T38727BCFP (27″ Deep) T39615BCFB (15″ Deep) T39027BCFP (27″ Deep) T38427BCFB (27″ Deep) T39327BCFP (27″ Deep) T38727BCFB (27″ Deep) T39627BCFP (27″ Deep) T39027BCFB (27″ Deep) Custom Modification Availability ID • RD • Finish Techniques Distressing Heirloom ✓ FILLERS T38415BCFB (15″ Deep) T39327BCFB (27″ Deep) 84” 87” 90” 93” or 96” Grain T39627BCFB (27″ Deep) • Available in 1″ depth increments from 6″ to 30″. • Enclosed top and bottom.Beaded Column 3″ Wide. • Finished veneer on end panel exterior. • Front and both sides finished. 27″ Deep ID • RD • DESCRIPTION MODEL BOX COLUMN FILLERS. • Front and both sides finished. • No reveal on filler. • Reversible. Custom Modification Availability 3” 3” ID • RD • Finish Techniques Distressing Heirloom ✓ Effective March 17. • Reversible. • When Fluted or Beaded Box Column Fillers are ordered with Rustic Alder door styles.Plain Column 3″ Wide. 15″ & 27″ Deep T38415BCFF (15″ Deep) 15” or 27” 27” Finish Techniques Distressing Heirloom ✓ T38715BCFF (15″ Deep) T39015BCFF (15″ Deep) T39315BCFF (15″ Deep) T39615BCFF (15″ Deep) T38427BCFF (27″ Deep) Grain 360 T38727BCFF (27″ Deep) 3” Plain 27” 27” Grain Grain 3” 3” Fluted Beaded B334. Beaded Column Availability 3″ Wide. Custom Modification Availability ID • 84” 87” 90” 93” or 96” Grain Custom Modification Availability ID • RD • Finish Techniques Distressing Heirloom ✓ RD • Finish Techniques Distressing Heirloom ✓ Tall . • Enclosed top and bottom.527BCFF T39027BCFF (27″ Deep) B334. 3″ WIDE (cont’d) Tall . 2014 . • No reveal on filler. • When Fluted or Beaded Box Column Fillers are ordered with Rustic Alder door styles.527BCFB T39327BCFF (27″ Deep) T39627BCFF (27″ Deep) • Available in 1″ depth increments from 6″ to 30″. 15″ & 27″ Deep 15” or 27” 3” T38415BCFP (15″ Deep) T38715BCFP (15″ Deep) Tall . B334. may be used on either left or right end. may be used on either left or right end.DESCRIPTION MODEL BOX COLUMN FILLERS.Plain. • Finished veneer on end panel exterior.527BCFP 3″ WIDE (cont’d) Custom Modification Base . Fluted. will not feature Rustic characteristics. 39” 42”. 33” 36”. Custom Modification Availability ID • RD • Finish Techniques Distressing Heirloom ✓ Effective March 17. 6″ WIDE (cont’d) Wall . 48” 51”.527BCFF 27” W660BCFF B634. 27″ Deep W630BCFF W633BCFF W636BCFF 27” B634. 15” 18”. 15” 18”. • 1/2″ plywood construction.5BCFB W660BCFP Wall . • When Fluted or Beaded Box Column Fillers are ordered with Rustic Alder door styles.527BCFP Custom Modification Availability W639BCFF W642BCFF Grain W648BCFF ID • RD • Finish Techniques Distressing Heirloom ✓ W651BCFF W654BCFF 6” W657BCFF B634.Beaded Column 15″ Deep W621BCFP 15” W621BCFB 12”.Plain Column 15″ Deep W612BCFP W612BCFB W618BCFP BOX COLUMN FILLERS. • Finished veneer on end panel exterior. • When Fluted or Beaded Box Column Fillers are ordered with Rustic Alder door styles. RD • W612BCFF W615BCFF Custom Modification Availability W618BCFF Grain W621BCFF ID • RD • Finish Techniques Distressing Heirloom ✓ W623. 33” 36”. 39” 42”. will not feature Rustic characteristics.5BCFB W630BCFB 6” Custom Modification Availability 15” W618BCFB W623. • No reveal on filler. Fluted. 6″ WIDE Wall .527BCFB Custom Modification Availability ID • RD • Finish Techniques Distressing Heirloom ✓ Grain 6” 27” Grain 6” FILLERS 15” • Available in 1″ depth increments from 6″ to 30″.Plain.5BCFP W630BCFP 6” W633BCFP W636BCFP Grain W633BCFB W639BCFB W642BCFP W642BCFB W648BCFP W648BCFB W651BCFP W651BCFB W654BCFP W654BCFB W657BCFP W657BCFB W660BCFB ID • • Available in 1″ depth increments from 6″ to 30″.5BCFP W627.DESCRIPTION MODEL DESCRIPTION MODEL BOX COLUMN FILLERS.5BCFF 6” 361 W636BCFB W639BCFP Finish Techniques Distressing Heirloom ✓ 12”.Fluted Column 15″ Deep W615BCFB Base . 54” 57” or 60” W623. 54” 57” or 60” W627. • Enclosed top and bottom. • No reveal on filler. 48” 51”. Beaded Column 6″ Wide. • Finished veneer on end panel exterior. may be used on either left or right end. 21” 231/2” 271/2” 30”. 21” 231/2” 271/2” 30”. 39” 42”. may be used on either left or right end. 21” 231/2” 271/2” 30”. 15” 18”. • Front and both sides finished. 2014 . • Reversible. • Reversible. • 1/2″ plywood construction. will not feature Rustic characteristics.5BCFF W627. • Front and both sides finished. • Enclosed top and bottom. 48” 51”. 54” 57” or 60” Grain W615BCFP 12”. 33” 36”. • Reversible. 15″ & 27″ Deep 15” or 27” T68415BCFF (15″ Deep) DISHWASHER DOOR KIT T68715BCFF (15″ Deep) 24” T69015BCFF (15″ Deep) T69315BCFF (15″ Deep) 18” T69615BCFF (15″ Deep) FILLERS/DISHWASHER FRONT KITS DWD Grain T68427BCFF (27″ Deep) 30” T68727BCFF (27″ Deep) Grain T69027BCFF (27″ Deep) • Door panel kits include 1/4″ veneer wood panels and doors with attachment screws for field installation. • Finished veneer on end panel exterior.DESCRIPTION MODEL DESCRIPTION MODEL BOX COLUMN FILLERS. 15″ & 27″ Deep T68415BCFP (15″ Deep) BOX COLUMN FILLERS. • If Distressing is specified.Fluted Column 6″ Wide.Beaded Column 6″ Wide. only the door will receive sand-through characteristics. will not feature Rustic characteristics. only the doors will receive distressing characteristics (not the panel).Plain Column 6″ Wide. 6″ WIDE (cont’d) Tall . • When ordered with Rustic Alder door styles. 6″ WIDE (cont’d) Tall . will not feature Rustic characteristics. • When Fluted or Beaded Box Column Fillers are ordered with Rustic Alder door styles. • No reveal on filler. 15″ & 27″ Deep T68415BCFB (15″ Deep) 15” or 27” T68715BCFP (15″ Deep) T69015BCFP (15″ Deep) 15” or 27” T69315BCFP (15″ Deep) 362 Grain T69015BCFB (15″ Deep) T69315BCFB (15″ Deep) T69615BCFP (15″ Deep) T69615BCFB (15″ Deep) T68427BCFP (27″ Deep) T68427BCFB (27″ Deep) T68727BCFP (27″ Deep) T68727BCFB (27″ Deep) T69027BCFP (27″ Deep) T69027BCFB (27″ Deep) T69327BCFP (27″ Deep) T69327BCFB (27″ Deep) T69627BCFP (27″ Deep) 84” 87” 90” 93” or 96” T68715BCFB (15″ Deep) Custom Modification Availability T69627BCFB (27″ Deep) ID • RD • Finish Techniques Distressing Heirloom ✓ 84” 87” 90” 93” or 96” • Available in 1″ depth increments from 6″ to 30″. may be used on either left or right end. • No bottom overlay panel. • Enclosed top and bottom. Finish Techniques Distressing Heirloom ✓ ✓ T69327BCFF (27″ Deep) 84” 87” 90” 93” or 96” Grain T69627BCFF (27″ Deep) Custom Modification Availability ID • RD • DISHWASHER FRONT PANELS Finish Techniques Distressing Heirloom ✓ 24” Grain DWPWD (1/4″ Veneer) DWPLAM18 (1/8″) • 1/4″ thick veneered furniture board. 2014 . • If Heirloom is specified. • Custom doors not available. Finish Techniques Distressing Heirloom 30” 6” Effective March 17. Grain Custom Modification Availability ID • RD • Finish Techniques Distressing Heirloom ✓ 6” 6” DISHWASHER FRONT KITS Tall . available in White only. • 1/2″ plywood construction. • Front and both sides finished. • 1/8″ thick laminated furniture board. Benson. standard door sizes must be ordered. and Trystan. x 11mm deep 3/32” bore: 35mm dia. Buchanon. • Doors are finished on both sides and routed for hinges. Doors 47 1/2″ and over will have two center panels. Cartright. 363 Maximum Minimum Maximum Minimum Width Width Height Height 24″ 7 1/2″ 72″ 10″ Non-Miter Styles Miter 24″ 8″ 61″ 10″ Styles Non-Miter Styles: Width: Doors up to 23 3/4″ will have one center panel. Doors over 23 3/4″ will have two center panels. For Decorative Appliance Panels.DESCRIPTION MODEL Custom Doors with Hinge Routing DOORBL DOORBR 25/32” 31/4” 7/8” 3/8” DOORWL 125/32” DOORWR 10” to 351/2” bore: 8mm dia. x 11mm deep APPLIANCE PANELS 15/32” Effective March 17. • Wall doors must specify square/cathedral/arch. Catalina. • Hinges must be ordered separately and specified full or partial overlay. Finish Techniques Distressing Heirloom ✓ ✓ 203/4” 591/2” to 72” 203/4” 3/32” 23/8” bore: 8mm dia. (Cathedral and Arch doors are available in sizes up to 23 3/4″ wide. On non-miter doors. maximum size is 23 1/2″ x 43″. 2014 . x 11mm deep bore: 35mm dia. x 11mm deep 23/8” 15/32” 25/32” 31/4” 7/8” 125/32” 3/8” • Base doors (DOORBL and DOORBR) will always be square. the tall door on the bottom will have two vertical panels. • Plastic mollies pressed in 8mm holes to accept screws to anchor the hinges to the back of these doors. x 11mm deep bore: 35mm dia.) Height: Doors under 47 1/2″ will have one center panel. Any door with a minimum width or height dimension less than 10″ will receive a flat center panel. • Available in all door styles except Addison. x 11mm deep 3/32” 23/8” 15/32” 25/32” 31/4” 125/32” 7/8” 3/8” 359/16” centered to 597/16” bore: 8mm dia. • CG modification available. Panels mount to the appliance using trim kits provided by the appliance supplier. Cartright. square footage requirements are calculated by multiplying the height and width for each panel and door (square footage = width x height (in inches)/144).10” APPLIANCE Spacer (not included) Framed Application Trim Reveal Grain BACKER PANEL (not included) Grain APPLIANCE 1/4” DOOR Finish Techniques Distressing Heirloom DADOORW DOOR • DAPNL1/4 includes 1/4″ finished veneer on MDF core. edges are not finished. (<3″ wide rails/stiles) doors over 23 3/4″ wide 8 1/2″ will have two center panels) (3″ wide rails/stiles) 23 3/4″ (Arch/ Cathedral styles) 24″ 8″ 47 7/16″ 61″ 7 1/2″ (<3″ wide rails/stiles) 8 1/2″ (3″ wide rails/stiles) 8″ Maximum Height 72″ (Doors over 47 1/2″ high will have two center panels) Minimum Height* 7 1/2″ (<3″ wide rails/stiles) 61″ 8″ 23 3/4″ 7 1/2″ 24″ 8″ 8 1/2″ (3″ wide rails/stiles) *Any door with a minimum width or height dimension less than 10″ will receive a flat center panel. DESCRIPTION MODEL Custom Doors Square Profile: Overlay Application (with Backer Panel) 1/4” DAPNL1/4 OR 3/4” PANEL APPLIANCE 1/4” Trim Reveal DAPNL3/4 Horizontal Grain. • DADOORHG center panel grain runs horizontal. 2014 . For these reasons. –Some appliances require a . Backs of doors may have identification marks and may also be unfinished. and mounts to the appliance using trim kits provided by the appliance supplier. Panel is cut to fit appliance doors. standard door sizes must be ordered. and 43″ x 23 1/2″ for DADOORHG. and DADOORHG). Stiles and rails are built as doors with a single center panel. please fax the order form to customer service. Model DADOORB and DADOORW Door Style Type Non-Miter Styles DADOORB and DADOORW Miter Styles DADOORHG Non-Miter Styles Grain DADOORHG Grain DADOORB Arch/Cathedral Profile: . No backer panel included. Square Profile: NEW Overlay Application (no Backer Panel) . • DADOORHG will utilize a flat panel on raised panel styles when width or height is less than 10″. Finish Techniques Distressing Heirloom ✓ ✓ Effective March 17. For manual orders. DADOORW.DESCRIPTION MODEL DECORATIVE APPLIANCE PANELS All custom panels and doors can be ordered through 20/20. Maximum Minimum Width Width* 7 1/2″ 35 3/4″ (Square styles. For Decorative Appliance Panels. • When ordered with Rustic Alder door styles. Benson. Catalina. and Trystan. For these reasons. • DAPNL3/4 can be ordered in APC. panel cut to fit appliance doors. these doors are not suitable for use as cabinet doors. DADOORB. • Available in all door styles except Addison. Due to customized ordering. DAPNL3/4. and all four edges. –The 1/4″ backer panel may be ordered separately (see DAPNL1/4).10” Miter Styles DADOORHG • DADOORB is a custom sized door with a square door profile (Arch & Cathedral styles will always be square).10″ spacer and/or a 1/4″ backer panel. maximum size is 23 1/2″ x 43″ for DADOORB and DADOORW. Buchanon. • DAPNL1/4 is finished on face only. • CG modification available. Backs of doors may have identification marks and may also be unfinished. • DAPNL3/4 kit includes 3/4″ furniture board core veneer panel finished on both sides. • Includes a 3/4″ thick door made to a custom size for the appliance front. • Custom sizes available in 1/16″ increments. • All doors will be specified ‘‘NO HINGE ROUTE’’. • All doors will be specified ″NO HINGE ROUTE″. will not feature Rustic characteristics. Maximum Minimum Maximum Minimum Width Width Height Height DAPNL1/4 48″ 5″ 96″ 5″ DAPNL3/4* 48″ 5″ 48″ 5″ DAPNL3/4** 30″ 5″ 96″ 5″ *If DAPNL3/4 is 48″ high or less **If DAPNL3/4 is greater than 48″ high Grain on panels will follow the height dimension (vertical) APPLIANCE PANELS BACKER PANEL (not included) Custom Panels DOOR 364 APPLIANCE Spacer (not included) Custom Panels & Doors (DAPNL1/4. these doors are not suitable for use as cabinet doors. • Custom sizes available in 1/16″ increments. Decorative Appliance Panels may not be returned. • DADOORW is a custom sized door with the door profile matching the selected door style profile (Arch & Cathedral styles will be Arch/Cathedral) • DADOORHG is a custom sized door with a square door profile (even when ordered in an Arch or Cathedral style). height height height height height = = = = = square inches square inches square inches square inches square inches } total square inches DADOORB (Square Profile) and/or DADOORW (Arch/Cathedral Profile) and/or DADOORHG (Horizontal Grain. height = square inches total square inches DOORBL or DOORWL in. Square Profile) — Circle Door Choice Below For Each Door DADOORB or DADOORW or DADOORHG in. Refer to Spec Book for door style availability. width x in. width x in. Standard or Custom Doors — Circle Choice width width width width width x x x x x in. width x in. height = square inches DADOORB or DADOORW or DADOORHG in. B in. width x in. in. E in. height = square inches DOORBL or DOORWL in. width x in. Doors will be selected by manufacturer to best fit panel dimensions. in. height = square inches DOORBL or DOORWL in. width x in. Provide Order Information* Account #: Date: Bill To: STEP 2: PO #: Order #: Ship To: Select Appliance Type* (circle one per order form) 365 Appliance Brand Name and Model Number Refrigerator/Freezer Single Door A Side-by-Side A B Side-by-Side w/Dispenser A C Side-by-Side w/ Dispenser & TV A C B E Top/Bottom A Single Door w/Grill D A Side-by-Side w/Grill Side-by-Side w/Dispenser & Grill D A Side-by-Side w/ Dispenser/TV & Grill D B A B A A C D A D A STEP 3: A Under Counter w/Drawers Dishwasher Dishwasher Double Single Drawer Drawer Wine Cooler A B E A A Trash Compactor/ Ice Maker B French Door w/Dispenser B B Dishwasher Dishwasher Standard Standard C C B Under Counter B A B C Top/Bottom w/Grill D C French Door A A B B Dishwasher/Trash Compactor/ Ice Maker/Wine Cooler Top/Bottom w/Drawers E B A B A C B A A Provide Dimensions in Inches for Panels and/or Doors Needed as Listed Above* Custom Panels – Dimensions for Custom Size Panel(s) and/or Door(s) DAPNL1/4 or DAPNL3/4 — Circle Panel Thickness A in. D in. C in. height = square inches DOORBL or DOORWL in. width x in. door style limitations and center panel configurations. height = square inches } } Effective March 17. 2014 APPLIANCE PANEL SPECIFICATION FORM Standard Door Sizes – Dimensions for Panels with Standard Door Sizes (Chosen by Manufacturer) *Supply overall dimensions (width and height for each panel only). height = square inches total square inches DADOORB or DADOORW or DADOORHG in.DECORATIVE APPLIANCE PANEL ORDER FORM STEP 1: Use one order form per appliance. height = square inches DADOORB or DADOORW or DADOORHG in. . width x in. width x in. height = square inches DADOORB or DADOORW or DADOORHG in. height = square inches DOORBL (Square Profile) and/or DOORWL (Arch/Cathedral Profile) — Circle Door Choice Below For Each Door DOORBL or DOORWL in. width x in. in. in. • Not available in conjunction with Furniture Ends (FPEB). 23 1/4” Custom Modification Availability ID • 34 1/2” WEPS33WD (1/4″ Veneer) WEPS33LAM18 (1/8″) RD • Grain 366 WEPS30LAM18 (1/8″) 111/4” 30” 33” 36” 39” or 42” WEPS36WD (1/4″ Veneer) WEPS36LAM18 (1/8″) Grain WEPS39WD (1/4″ Veneer) WEPS39LAM18 (1/8) Finish Techniques Distressing Heirloom WEPS42WD (1/4″ Veneer) WEPS42LAM18 (1/8″) Tall • 1/4″ thick veneered furniture board.5LAM18 (1/8″) • 1/4″ thick veneered furniture board. • 102″. 2014 . available in White only. and 120″ available in Maple and Cherry only. available in White only. will not feature Rustic characteristics. BP4896LAM only available in Natural Maple.DESCRIPTION PANELS & SKINS MODEL DESCRIPTION MODEL BEPS34. available in White only. • 1/8″ thick laminated furniture board. • Laminate panels available only in White except BP4896LAM. TEPS96LAM18† (1/8″) Grain NEW TEPS102WD† (1/4″ Veneer) NEW TEPS108WD† (1/4″ Veneer) NEW TEPS120WD† (1/4″ Veneer) 96” Grain • 1/4″ thick veneered furniture board. • 1/4″ or 1/8″ thick laminated furniture board. • When ordered with Rustic Alder door styles.5LAM18 (1/8″) † TEPS90WD (1/4″ Veneer) 231/4” BP4896WD† (1/4″ Veneer) TEPS90LAM18† (1/8″) 48” TEPS93WD† (1/4″ Veneer) BP4896LAM† (1/4″) BP4896LAM18† (1/8″) TEPS93LAM18† (1/8″) TEPS96WD† (1/4″ Veneer) 84” 87” 90” 93” 96” 102” 108” or 120” • 1/4″ thick veneered furniture board. Custom Modification Availability Custom Modification Availability ID RD Finish Techniques Distressing Heirloom † ID • RD • 5 day Express Response not available on items greater than 48″ Finish Techniques Distressing Heirloom † PANELS & SKINS 5 day Express Response not available on items greater than 48″ Effective March 17.5WD (1/4″ Veneer) END PANEL SKINS (cont’d) Wall WEPS30WD (1/4″ Veneer) END PANEL SKINS Base BEPS34. will not feature Rustic characteristics. • When ordered with Rustic Alder door styles. • For custom sizes refer to DAPNL 1/4. • 1/8″ thick laminated furniture board. 108″. • 1/8″ thick laminated furniture board.5WD (1/4″ Veneer) † TEPS84LAM18 (1/8″) TEPS87WD† (1/4″ Veneer) 30” or 341/2” † TEPS87LAM18 (1/8″) BP4834. TEPS1248WD (1/4″ Veneer) 111/4” TEPS1248LAM18 (1/8″) TEPS1296WD† (1/4″ Veneer) Custom Modification Availability † TEPS1296LAM18 (1/8″) 48” 96” 102” 108” or 120” Grain NEW TEPS12102WD† (1/4″ Veneer) NEW TEPS12108WD† (1/4″ Veneer) NEW TEPS12120WD† (1/4″ Veneer) ID • RD • Finish Techniques Distressing Heirloom FINISHED BACK SKINS † TEPS84WD (1/4″ Veneer) BP4830WD (1/4″ Veneer) 48” BP4830LAM18 (1/8″) Grain BP4834. Custom Modification Availability Laminate Wood ID • • RD • • APC MIP • Finish Techniques Distressing Heirloom Effective March 17. • When used as a skin. Grain 341/2” or 48” Custom Modification Availability ID BLSBEPLAM • • • • 23 7/8” RD 1/2″ thick veneered or laminated furniture board. will not feature Rustic characteristics. When ordered with Rustic Alder door styles. • When ordered in opaque finishes. Panels are finished on two sides and front edge. panels will use vertical grain and grain will not be visible. Custom Modification Availability Laminate Wood MIP ID • •▲ RD • • APC MIP • Finish Techniques Distressing Heirloom • Finish Techniques Distressing Heirloom † 5 day Express Response not available on items greater than 48″ Tall wood panels will be plywood when ID31-ID36 is specified. Laminate panels available only in White.5VG Custom Modification Availability ID RD TEP1296WD† TEP1296LAM† 48” or 96” Grain 84” 87” 90” 93” or 96” TEP2484WD†▲ TEP2484LAM† Grain TEP2487WD†▲ TEP2487LAM† Finish Techniques Distressing Heirloom ✓ 1/4” 367 TEP2490WD†▲ TEP2490LAM† † 5 day Express Response not available on items greater than 48″ TEP2493WD†▲ END PANELS Wall TEP2493LAM† WEP1230WD TEP2496WD†▲ WEP1230LAM 12” TEP2496LAM† BEPWD • • • • BEPLAM 30” • • • • Grain Base 24” 3/4″ thick veneered or laminated furniture board.DESCRIPTION MODEL CROSS GRAIN VENEER BACK SKIN BP9634. When ordered with Rustic Alder door styles. ▲ Grain Vanity VBEP2129WD VBEP2129LAM Grain VBEP2132WD 29” or 32” VBEP2132LAM • • • • 21” 3/4″ thick veneered or laminated furniture board. Panels are finished on two sides and front edge. Laminate panels available only in White. will not feature Rustic characteristics. will not feature Rustic characteristics. 2014 PANELS & SKINS 34 1/2” . • When ordered with Rustic Alder door styles. When ordered with Rustic Alder door styles. will not feature Rustic characteristics. not compatible in conjunction with Furniture Ends (FPEB) or Authentic Ends (AUTHL/AUTHR). • When ordered with Rustic Alder door styles. will not feature Rustic characteristics. • V-groove on 3″ centers. Laminate panels available only in White. When ordered with Rustic Alder door styles. will not feature Rustic characteristics. Laminate panels available only in White. Custom Modification Availability Laminate Wood ID • • RD • • APC 3/4″ thick veneered or laminated furniture board.5CRSGR 1/4″ PANELS BP9648CRSGR 96” DESCRIPTION MODEL END PANELS (cont’d) Lazy Susan BLSBEPWD • Veneer on MDF core. Panels are finished on two sides and front edge. Custom Modification Availability Laminate Wood Grain 34 1/2” Finish Techniques Distressing Heirloom ID • • RD • • APC MIP • Finish Techniques Distressing Heirloom WOOD V-GROOVED BEADED SKIN 1/4″ PANELS BP4830VG TEP1248WD 24” 12” TEP1248LAM † BP4896VG 48” • Veneer on MDF core. Panels are finished on two sides and front edge. Grain 30” 341/2” or 96” Tall BP4834. 5WD† TEP2496F1. 2014 .5WD TEP2484F3LAM† or 3” TEP2487F1.5WD† WEP1236F1.5LAM† WEP1242F3LAM TEP2493F3WD† TEP2493F3LAM† • 1/2″ thick veneered or laminated furniture board. Finish Techniques Distressing Heirloom ✓ Custom Modification Availability Laminate Wood ID • • RD • • APC MIP • • Finish Techniques Distressing Heirloom ✓ † PANELS & SKINS 5 day Express Response not available on items greater than 48″ Effective March 17. For veneered interior.5LAM WEP1230F3LAM WEP1233F1.DESCRIPTION MODEL DESCRIPTION MODEL WALL PANEL with FILLER ATTACHED WEP1230F1.5WD TEP2490F3LAM† WEP1242F1.5WD† WEP1242F3WD TEP2493F1.5WD† WEP1239F3WD TEP2490F1. For veneered interior.5WD 12” 30” 33” 36” 39” or 42” 368 WEP1230F1. • Laminate panels available only in White.5WD TEP2487F3LAM† 1 1/2” or 3” WEP1239F1. Distressing not available.5LAM TEP2490F1. Custom Modification Availability Laminate Wood ID • • RD • • TEP2496F1.5LAM 24” WEP1230F3WD Grain TEP2484F1.5LAM† TEP2496F3WD† APC MIP • • TEP2496F3LAM† • 1/2″ thick veneered or laminated furniture board. specify MIP. specify MIP.5WD Grain BEPF1.5LAM† WEP1239F3LAM TEP2490F3WD† WEP1242F1. Distressing not available. • Panel will have veneered exterior and Natural Maple or White laminated interior standard.5LAM TEP2493F1.5WD† TEP2484F1.5LAM† 1/2” WEP1236F3LAM TEP2487F3WD† 3/4” WEP1239F1.5LAM† TEP2484F3WD† 11/2” WEP1236F1.5WD BASE and TALL PANELS with FILLER ATTACHED BEPF1.5LAM WEP1233F3WD WEP1233F3LAM 11/2” or 3” BEPF3WD BEPF3LAM 341/2” 84” 87” 90” 93” or 96” WEP1233F1. • Panel will have veneered exterior and Natural Maple or White laminated interior standard. • Laminate panels available only in White.5LAM 1/2” WEP1236F3WD 3/4” 1 1/2” or 3” TEP2487F1. 5AER MIP • WEP1239F3AEL WEP1239F3AER Finish Techniques Distressing Heirloom ✓ WEP1242F1. Panel will have veneered exterior and Natural Maple or White laminated interior standard.5AER 3/4” • 3/4″ thick veneered plywood with doors attached.DESCRIPTION MODEL DESCRIPTION MODEL WALL PANEL with FILLER ATTACHED and FURNITURE ENDS WEP1230F1.5FPE† 3/4” TEP2496F3FPE† 11/2” or 3” NEW TEP24102F1.5FPE WEP1239F3FPE WEP1242F1. • Not available in laminate. • 102″ and 108″ available in Maple and Cherry only and will have MIP standard. Depth can be increased in 3″ increments up to 24″ deep. For veneered interior. Custom Modification Availability Wood TEP2487F3FPE† TEP2490F1.5FPE† Grain 3/4″ thick veneered plywood with doors attached.5FPE† TEP2490F3FPE† 11/2” or 3” TEP2493F1.5FPE† NEW TEP24108F3FPE† APC MIP • BEPF1. Custom Modification Availability Wood RD • Finish Techniques Distressing Heirloom ✓ ✓ † 3/4” ID • Grain Grain 341/2” • 3/4″ thick veneered plywood with doors attached. • Panel will have veneered exterior and Natural Maple or White laminated interior standard.5AEL BEPF1. 2014 . For veneered interior.5FPE 11/2” or 3” 3” Custom Modification Availability Wood WEP1233F3AEL WEP1233F3AER ID • RD • APC 369 WEP1236F1. specify MIP.5AEL WEP1230F3FPE WEP1233F1. For veneered interior.5AEL WEP1242F1.5FPE WEP1239F1. Not available in laminate.5FPE† TEP2484F3FPE† 341/2” TEP2487F1. specify MIP.5FPE TEP2493F3FPE† BASE PANEL with FILLER ATTACHED and AUTHENTIC ENDS TEP2496F1. • Depth can be increased in 3″ increments up to 36″ deep.5FPE WALL PANEL with FILLER ATTACHED and AUTHENTIC ENDS WEP1230F1. Custom Modification Availability Wood Grain ID • RD APC MIP • Finish Techniques Distressing Heirloom ✓ ✓ 24” ID • RD • APC MIP • Finish Techniques Distressing Heirloom ✓ 1 1/2” or 3” 3/4” † 5 day Express Response not available on items greater than 48″ PANELS & SKINS 84” 87” 90” 93” 96” 102” or 108” WEP1242F3AEL BEPF1.5AEL WEP1236F1. For veneered interior.5FPE 12” WEP1236F1. • Panel will have veneered exterior and Natural Maple or White laminated interior standard.5AER WEP1236F3AEL WEP1236F3AER 3/4” WEP1239F1.5FPE† NEW TEP24102F3FPE† NEW TEP24108F1. 3/4” 11/2” or WEP1233F1.5AEL 11/2” or 3” WEP1239F1. specify MIP. • Not available in laminate.5AER BEPF3AEL BEPF3AER • 3/4″ thick veneered plywood. specify MIP.5AER BASE and TALL PANELS with FILLER ATTACHED and FURNITURE ENDS WEP1242F3AER BEPF3FPE 24” • • • • TEP2484F1. • Panel will have veneered exterior and Natural Maple or White laminated interior standard.5FPE 3/4” 1 1/2” or 3” Effective March 17.5AER Grain 11/2” or 3” WEP1242F3FPE 3/4” WEP1230F3AER WEP1233F1.5AEL 30” 33” 36” 39” or 42” WEP1236F3FPE Grain WEP1230F3AEL 12” WEP1233F3FPE 30” 33” 36” 39” or 42” WEP1230F1. 5AER 24” TEP96F3AERSD TEP2484F3AEL 1 1/2” or 3” TEP2484F3AER TEP2487F1.DESCRIPTION MODEL DESCRIPTION BASE PANEL with FILLER ATTACHED and AUTHENTIC ENDS. For veneered interior. Not available in laminate. On non-miter doors.5AERSD Finish Techniques Distressing Heirloom ✓ ✓ TEP90F3AELSD 84” 87” 90” 93” or 96” 24” 1 1/2” or 3” TEP90F3AERSD TEP93F1. • Panel will have veneered exterior and Natural Maple or White laminated interior standard.5AELSD • 3/4″ thick veneered plywood with doors attached. • Panel will have veneered exterior and Natural Maple or White laminated interior standard. SINGLE TEP84F1. specify MIP.5AELSD TALL PANEL with FILLER ATTACHED TEP84F1.5AELSD TEP90F1. SINGLE DOOR BEPF1. Not available in laminate.5AEL 3/4″ thick veneered plywood with doors. • Depth can be reduced in 3″ increments down to 9″ deep.5AER Grain TEP2493F3AEL Grain TEP2493F3AER TEP2496F1.5AERSD TEP96F3AELSD TALL PANEL with FILLER ATTACHED TEP2484F1.5AELSD TEP93F1.5AELSD 1 1/2” or 3” TEP96F1. Depth can be reduced in 3″ increments down to 9″ deep.5AERSD TEP93F3AELSD Grain 3/4” TEP93F3AERSD 3/4” TEP96F1. Custom Modification Availability Wood ID RD • APC MIP • Finish Techniques Distressing Heirloom ✓ ✓ TEP2490F1. Custom Modification Availability Wood ID • RD APC MIP • Finish Techniques Distressing Heirloom ✓ ✓ Effective March 17. Panel will have veneered exterior and Natural Maple or White laminated interior standard. 2014 .5AELSD and AUTHENTIC ENDS.5AER Grain Grain 3/4” TEP2487F3AEL 1 1/2” or 3” TEP2487F3AER TEP2490F1.5AERSD TEP87F3AELSD Grain TEP87F3AERSD MIP • TEP90F1. For veneered interior. Grain MODEL TEP87F1.5AERSD BEPF3AELSD 24” BEPF3AERSD 341/2” 370 Custom Modification Availability Wood ID RD • APC TEP84F3AERSD TEP87F1.5AEL 3/4” TEP2487F1. specify MIP. Depth can be increased in 3″ increments up to 36″ deep.5AERSD DOOR TEP84F3AELSD BEPF1.5AEL TEP2496F1.5AER TEP2496F3AEL TEP2496F3AER • • • • 11/2” or 3” 3/4” PANELS & SKINS 3/4” 1 1/2” or 3” 3/4″ thick veneered plywood with doors. specify MIP.5AEL and AUTHENTIC ENDS TEP2484F1. For veneered interior.5AER TEP2490F3AEL 84” 87” 90” 93” or 96” • • • • TEP2490F3AER TEP2493F1. the tall door on the bottom will have two vertical panels.5AEL TEP2493F1. 2014 . • Not compatible on cabinets specified with FPEB. Custom Modification Availability ID RD Finish Techniques Distressing Heirloom ✓ ✓ Grain 66” PANELS & SKINS DESCRIPTION Grain Effective March 17. the tall door on the bottom will have two vertical panels. Custom Modification Availability DESCRIPTION Grain • Door panel kits include 1/4″ veneer wood panels and doors with attachment screws for field installation. will not feature Rustic characteristics.MODEL Depth WOOD V-GROOVED with TRIPLE BEADED FRONT 3/4″ PANELS 243/4” 123/4” BEPVG (34 1/2″) 24 3/4″ BEPPVG (Peninsula) 25 1/2″ † TEP1284VG 12 3/4″ TEP1296VG† 12 3/4″ TEP84VG† 24 3/4″ TEP87VG† 24 3/4″ TEP90VG† 24 3/4″ † 24 3/4″ TEP93VG Grain 84” 87” 90” 93” or 96” 123/4” 213/4” Grain 29” or 32” 12” 15” 18” 21” 231/2” 271/2” 30” 33” 36” 39” or 42” Grain 84” or 96” Grain † • • • • TEP96VG 24 3/4″ VBEP29VG 21 3/4″ VBEP32VG 21 3/4″ WEP12VG 12 3/4″ WEP15VG 12 3/4″ WEP18VG 12 3/4″ WEP21VG 12 3/4″ WEP24VG (23 1/2″) 12 3/4″ WEP27VG (27 1/2″) 12 3/4″ WEP30VG 12 3/4″ WEP33VG 12 3/4″ WEP36VG 12 3/4″ WEP39VG 12 3/4″ WEP42VG 12 3/4″ WEPP42VG (Peninsula) 13 1/2″ 3/4” MODEL DECORATIVE DOOR PANEL KITS Base End BED 231/4” 30” 341/2” Grain Grain BEDSD • Door panel kits include 1/4″ veneer wood panels and doors with attachment screws for field installation. • On non-miter doors. Veneer on MDF core. When ordered with Rustic Alder door styles. Custom Modification Availability 30” 341/2” ID TED2487 Grain Grain Grain TED2493SD TED2496SD Grain 231/4” 18” 21” 24” 27” or 30” 84” 87” 90” 93” or 96” TED2487SD TED2490SD RD 5 day Express Response not available on items greater than 48″ TED2493 TED2484SD Grain Grain † TED2490 TED2496 66” Finish Techniques Distressing Heirloom ✓ 371 TED2484 231/4” 84” 87” 90” 93” or 96” RD Grain Tall End 18” 21” 24” 27” or 30” ID Finish Techniques Distressing Heirloom ✓ ✓ 231/4” Not available in laminate. • Not compatible on cabinets specified with FPEB. Use Authentic Ends modification for decorative doors with FPEB. Use Authentic Ends modification for decorative doors with FPEB. V-groove on sides on 3″centers. • 3/4″ thick veneered plywood. • When ordered with Rustic Alder door styles. will not feature Rustic characteristics. • Not compatible on cabinets specified with FPEB. 2014 .DESCRIPTION MODEL DECORATIVE DOOR PANEL KITS (cont’d) Wall End WED1218 WED1221 WED1224 111/4” WED1227 WED1230 372 18” 21” 231/2” 271/2” 30” 33” 36” 39” or 42” WED1233 WED1236 Grain WED1239 WED1242 WED2418 WED2421 WED2424 231/4” WED2427 WED2430 18” 21” 231/2” 271/2” 30” 33” 36” 39” or 42” WED2433 WED2436 Grain Grain WED2439 WED2442 WED2418SD WED2421SD 231/4” WED2424SD 18” 21” 231/2” 271/2” 30” 33” 36” 39” or 42” WED2427SD WED2430SD WED2433SD Grain WED2436SD WED2439SD WED2442SD • Door panel kits include 1/4″ veneer wood panels and doors with attachment screws for field installation. Custom Modification Availability ID RD Finish Techniques Distressing Heirloom ✓ ✓ VANITY DESK LEGS VDL2129WD VDL2132WD 21” 29” or 32” 43/4” Grain • All panels are finished 2 sides and front edge. • Custom door sizes not available. Use Authentic Ends modification for decorative doors with FPEB. PANELS & SKINS Custom Modification Availability 9” ID RD Finish Techniques Distressing Heirloom Effective March 17. and Cherry (with exceptions noted). RA 41/32” Finish Techniques Distressing Heirloom ✓ 3 3 /8 ” COTCROWN8 3 /4 ” SHAKER CROWN SHKRCRM8 1 /2 ” 1 /4 ” 11 /2 ” 2 5 /8 ” Finish Techniques Distressing Heirloom ✓ ✓ RA 11/2” 126/32” 55/16” NEW COVE CROWN COVECROWN8 25/32” NEW 3/4” 7/16” RA 31/2” RA Rustic Alder characteristics available LARGE SHAKER CROWN 1/2” COVECROWN10 • COVECROWN8 is one 8′ section. • Cleat shipped unattached can be used for top mount or face frame applications. Oak. Orders not placed together may not ship together. 5 day Express Response not available. available in Maple and Cherry only. 5 1 /4 ” 11/16” CORNICE TALL CROWN NEW 27/32” 1 /4 ” COTCROWN10 • COTCROWN8 is one 8′ section. Glazed edges indicated by arrows on side view drawings. • Since these items are ordered on an ‘‘as-required’’ basis. 37/16” Finish Techniques Distressing Heirloom ✓ 25/8” 43/32” PLATE RAIL 11/2” PR8 3 /4 ” • Top mounts. 5 day Express Response not available. available in Maple and Cherry only. Maple. 2014 MOULDING 127/32” . 325/32” 11/2” SHKRCRM10 • Top mount moulding. available in Maple and Cherry only. DESCRIPTION CROWN MOULDING 21/4” FULL OVERLAY CROWN NEW 21/8” CLTCROWN10 RA Finish Techniques Distressing Heirloom ✓ ✓ 373 FOLCROWN10 • FOLCROWN8 is one 8′ section. • Items will be shipped loose for field attachment. 21/2” Finish Techniques Distressing Heirloom ✓ ✓ RA 21/2” Finish Techniques Distressing Heirloom ✓ ✓ Finished edges indicated by bold lines on side view drawings. available in Maple and Cherry only. available in Maple and Cherry only. • Must specify wood specie. • FOLCROWN10 is one 10′ section. no changes or cancellations will be accepted after 24 hours from acknowledgement of order. include on same order. • LSHAKER10 is one 10′ section. finish. and technique. • Not available in Hickory. • INSCROWN10 is one 10′ section. NEW INSCROWN10 • INSCROWN8 is one 8′ section. 5 day Express Response not available. Ordering Process • To ensure product ships with the cabinet order. Product Characteristics • Natural characteristics of wood carved items are wider color range. 5 day Express Response not available. 3 /4 ” FOLCROWN8 11/4” CLTCROWN8 NEW Finish Techniques Distressing Heirloom ✓ 39/16” MODEL CLASSIC TALL CROWN • One 8′ section. 5 day Express Response not available. • Cleat shipped unattached can be used for top mount or face frame applications. and more noticeable variations in finish. Effective March 17. • COVECROWN10 is one 10′ section. • Cleat shipped unattached can be used for top mount or face frame applications. available in Maple and Cherry only. • Designed for use with all 2 1/4″ insert mouldings. 2” Finish Techniques Distressing Heirloom ✓ ✓ NEW LSHAKER8 LSHAKER10 • LSHAKER8 is one 8′ section. irregularity of surface texture. 5 day Express Response not available. if different than the rest of the order. • COTCROWN10 is one 10′ section. • Designed for use with all 2 1/4″ insert mouldings. • CLTCROWN10 is one 10′ section. • SHKRCRM10 is one 10′ section. • Not available in Hickory.ARCHITECTURAL ACCENTS All embellishments marked with the follow these guidelines: DESCRIPTION MODEL FRIEZE INSERT JINSERTFRM 13/16” Program Details • Products are available in Alder. 5 day Express Response not available. • Express Response program is available for 12 day delivery. • SHKRCRM8 is one 8′ section. 13/4” Finish Techniques Distressing Heirloom ✓ RA INSERT CROWN INSCROWN8 13/16” • CLTCROWN8 is one 8′ section. available in Maple and Cherry only. • One 8′ section. It is imperative to understand the variations these characteristics entail and therefore will not be considered defective. 2 1 /2 ” RA 25/16” SOLID WOOD VICTORIAN CROWN MODEL SWVCRM8 • Face mounts on Partial Overlay doors. • SWLCRM10 is one 10′ section. May be face mounted on Full Overlay if used with a cleat. Finish Techniques Distressing Heirloom ✓ 21/4” Glaze in Baroque Detail SWLCRM10 RA 21/32" 1/2” Finish Techniques Distressing Heirloom ✓ ✓ • Face mounts on Partial Overlay doors. Designed to be used with Insert Crown. • SWTCRM10 is one 10′ section. May be face mounted on Full Overlay if used with a cleat. • SMCOVECROWN8 is one 8′ section. available in Maple and Cherry only. • SWTCRM8 is one 8′ section. Pattern is 6″ repeat. 5 day Express Response not available. May be face mounted on Full Overlay if used with a cleat. • Designed for dentil. 5 day Express Response not available. • SCM8 is one 8′ section. • Not available in Hickory. Effective March 17. • Moulding can be used as shown or inverted. 5 day Express Response not available.DESCRIPTION MODEL SMALL COVE CROWN MOULDING SMCOVECROWN8 NEW DESCRIPTION SMCOVECROWN10 • Not available in Hickory. • Not available in Hickory. 35/16” 13/16” Finish Techniques Distressing Heirloom ✓ ✓ SWVCRM10 NEW 1 /2 ” 2 1 /2 ” RA 374 SMALL CROWN SCM8 NEW SCM10 MOULDING INSERTS • Face mounts on Partial Overlay doors. Finish Techniques Distressing Heirloom ✓ ✓ Finish Techniques Distressing Heirloom ✓ 21/4” SOLID WOOD TALL CROWN Glaze in Bijou Detail SWTCRM8 NEW 213/16” 2” SWTCRM10 • Face mounts on Partial Overlay doors. • SMCOVECROWN10 is one 10′ section. • SWCRM8 is one 8′ section. • SWLCRM8 is one 8′ section. rope. or egg & dart moulding application. • Pattern is 6″ repeat. • SWVCRM8 is one 8′ section. • SWVCRM10 is one 10′ section. • SWCRM10 is one 10′ section. 25/16" Finish Techniques Distressing Heirloom ✓ Glaze in Acanthus Detail SWLCRM8 NEW • Two 48″ sections. 2014 . available in Maple and Cherry only. available in Maple and Cherry only. 1 1 /4 ” 1 1 /8 ” RA SOLID WOOD CROWN SOLID WOOD LARGE CROWN BAROQUE INSERT INSERTBARO • • • • Two 48″ sections. Glazed edges indicated by arrows on side view drawings. 1 5 /8 ” ACANTHUS INSERT Finish Techniques Distressing Heirloom ✓ ✓ SWCRM8 NEW 3/8” BIJOU INSERT JBIJINSERTM • Two 48″ sections. available in Maple and Cherry only. Finish Techniques Distressing Heirloom 11/16” 5/16” MOULDING Glaze in Braided Detail RA Rustic Alder characteristics available Finished edges indicated by bold lines on side view drawings. 5 day Express Response not available. • Pattern is 6″ repeat. 5 day Express Response not available. • Moulding can be used as shown or inverted. available in Maple and Cherry only. • Moulding can be used as shown or inverted. • SCM10 is one 10′ section. SWCRM10 RA 15 / 8 ” JACANINSERTM 21/4” • Face mounts on Partial Overlay doors. 5 day Express Response not available. RA Finish Techniques Distressing Heirloom ✓ ✓ Finish Techniques Distressing Heirloom ✓ ✓ 1/2” BRAIDED BRAIDM • One 8′ section. • Moulding can be used as shown or inverted. Not available in Oak and Hickory. May be face mounted on Full Overlay if used with a cleat. May be face mounted on Full Overlay if used with a cleat. available in Maple and Cherry only. • Two 48″ sections. • Pattern is 6″ repeat. • Not available in Hickory. 1/2” RA Finish Techniques Distressing Heirloom 3/8” 3/8” Glaze in Egg & Dart Detail GREEK/AZTEC Finish Techniques Distressing Heirloom 3/4” Glaze in Rope Detail GREEKM WEAVE INSERT • One 8′ section. Glazed edges indicated by arrows on side view drawings. Finish Techniques Distressing Heirloom ✓ 215/64” 27/32” 1/2” 3/8” MISSION INSERT DENTIL JMISINSERTM DE8 • Two 48″ sections. Not available in Alder. • One 8′ section. Designed to be used with Insert Crown. and Hickory. • Not available in Hickory. Effective March 17. • Not available in Hickory. • Pattern is 6″ repeat. Pattern is 6″ repeat. • Not available in Hickory. JWEAVEINSERTM • Two 48″ sections. • One 8′ section. Finish Techniques Distressing Heirloom 3/4” Finish Techniques Distressing Heirloom ✓ 7/32” Glaze in Greek/Aztec Detail 21/4” Glaze in Weave Detail RA Rustic Alder characteristics available Finished edges indicated by bold lines on side view drawings. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 21/4” Glaze in Celtic Detail Glaze in Madeline Detail 1/2” COSMO INSERT 375 JCOSINSERTM • One 8′ section. Rustic Alder. • Bass wood. • Pattern is 6″ repeat. 5/8” Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom 1/4” 21/4” Glaze in Dentil Detail Glaze in Mission Detail 1/2” EGG & DART ROPE EGD8 3/32” RPM8 • Designed to face mount on VCRM8 or SWVCRM8.DESCRIPTION MODEL DESCRIPTION MODEL CELTIC INSERT INSERTCELT MADELINE INSERT JMADINSERTM • • • • Two 48″ sections. • One 8′ section. • Designed to face mount on VCRM8 or SWVCRM8. • Not available in Hickory. • Designed to face mount on VCRM8 or SWVCRM8. 2014 MOULDING 1/2” . 5 day Express Response not available. 19/16” 3 /4 ” Finish Techniques Distressing Heirloom ✓ 3/4” • One 8′ section. available in Maple and Cherry only. 2014 . 3/4” MOULDING 41/4” RA Rustic Alder characteristics available Finish Techniques Distressing Heirloom ✓ Finished edges indicated by bold lines on side view drawings. Effective March 17. • One 8′ section. 1 /4 ” Radius 5/16” LIBRARY MOULDING BPM8 RA Finish Techniques Distressing Heirloom ✓ ✓ Finish Techniques Distressing Heirloom 3 /8 ” 1/16” 21/2” 11/4” Radius 3 /4 ” End Panel Decorative Door 1” 3 /4 ” Back Panel MIRROR FRAME 1 /4 ” WMF8 • Pre-grooved. • One 8′ section. 3/4” Finish Techniques Distressing Heirloom ✓ 3” Finish Techniques Distressing Heirloom 1/4” SINGLE BEAD PILASTER SBP8 • One 8′ section. 3 /4” SBM8 • One 8′ section. • Designed to provide a decorative edge between cabinet and panel-corner seam. • Not available in Alder and Rustic Alder. • SM10 is one 10′ section.DESCRIPTION ACCENT MOULDING MODEL ACANTHUS ACAM DESCRIPTION MODEL IVY IVYM • One 8′ section. Finish Techniques Distressing Heirloom Finish Techniques Distressing Heirloom 1 3 /4 ” 1” Glaze in Acanthus Detail Glaze in Ivy Detail 1 /4 ” 376 11/32” BACK PANEL MOULDING 1/16” Radius 3 /4 ” 9/16” LBRM • One 8′ section. CABINET PANEL EDGE RA CPE8 3 /4 ” Finish Techniques Distressing Heirloom ✓ ✓ 3/16” • One 8′ section. • One 8′ section. Finish Techniques Distressing Heirloom ✓* 3 /4 ” *Available on TCM8 only SBE8 Finish Techniques Distressing Heirloom ✓ 3 /4 ” 1 /2 ” FLAT SCRIBE SM8 1/8” Radius NEW SINGLE BEAD MOULDING SM10 • SM8 is one 8′ section. • Can be used vertically between cabinets for an inset look. COUNTERTOP EDGE Contemporary CCM8 1/2” Traditional TCM8 19/16” SINGLE BEAD EDGE • One 8′ section. Finish Techniques Distressing Heirloom ✓ 21/8” 5 /8 ” 3 /4 ” 13/32” 1 /2 ” 17/8” OGEE EDGE OGEEM • One 8′ section. Glazed edges indicated by arrows on side view drawings. • SSM10 is one 10′ section. RA 1/ 2 ” 3 /4 ” Finish Techniques Distressing Heirloom ✓ 6” TBP8 • Finished beaded front and two 4 1/2″ sides. BASEBOARD . • BBM10 is one 10′ section.SCULPTED 23/16” BBMSC • One 8′ section.DESCRIPTION MODEL DESCRIPTION MODEL SMALL SCRIBE SSM8 TRIPLE BEAD EDGE TBEM NEW SSM10 • One 8′ section. • One 8′ section. available in Maple and Cherry only. 5 day Express Response not available. • SSM8 is one 8′ section. Finish Techniques Distressing Heirloom BASEBOARD . • Can be used vertically between cabinets for an inset look. • BBMB can be used in place of standard toekick to provide a surface for glaze hang-up on premium finishes. Finish Techniques Distressing Heirloom ✓ 3/4” 11/2” 1” 21/4” SOFFIT TRIM MOULDING TSTM 11/32” • One 8′ section. Finish Techniques Distressing Heirloom 17/32” TOE MOULDING BASEBOARD 3/4” BBM8 NEW 21/2” • BBM8 is one 8′ section. 41/2” CORNERPOST* 21/2” 3/4” *Use with Spindle Rail. 2014 MOULDING 13/4” . STR8 41/2” • One 8′ section. Finish Techniques Distressing Heirloom ✓ RA Finish Techniques Distressing Heirloom 3” 3/4” 3/4” RA Rustic Alder characteristics available Finished edges indicated by bold lines on side view drawings. 4 1 /2 ” SPINDLE RAIL SR8 7/16” BBM10 3 /4 ” Finish Techniques Distressing Heirloom ✓ ✓ RA • One 8′ section. • BBMSC can be used in place of standard toekick to provide a surface for glaze hang-up on premium finishes. 3/4” Finish Techniques Distressing Heirloom ✓ 3/4” Finish Techniques Distressing Heirloom 1/4” SOFFIT FILLER MOULDING SFM8 43/64” TRIPLE BEAD PILASTER • One 8′ section.SWOOPED STARTER MOULDING Finish Techniques Distressing Heirloom ✓ RA BBMSW • One 8′ section. • BBMSW can be used in place of standard toekick to provide a surface for glaze hang-up on premium finishes. Effective March 17. • Includes an unattached cleat. available in Maple and Cherry only. 5 day Express Response not available. 4 1 /2 ” 377 Finish Techniques Distressing Heirloom ✓ WIDE SCRIBE WSCRIBE • One 8′ section. Glazed edges indicated by arrows on side view drawings. • Not available in Hickory.DESCRIPTION MODEL TOEBOARDS TB8LAM18 TB8WD14 DESCRIPTION LIGHT RAILS MODEL CAP MOULDING CAPM • One 8′ section. 1 piece. Effective March 17. WCM4 (4′) WCM7 (7′) Finish Techniques Distressing Heirloom 3 /4 ” 9/16” Finish Techniques Distressing Heirloom ✓ 11/4” 2 1 /4 ” TRADITIONAL LIGHT RAIL 5 /8 ” WINDOW CASING TRADITIONAL WCT4 (4′) JINSERTLRT • One 8′ section. • Not available in Hickory. • TB8WD14 is 1/4″ Plywood Finished Veneer. 1 piece. • One 8′ section. 1 piece. RA 3 /4 ” Finish Techniques Distressing Heirloom SMLR Finish Techniques Distressing Heirloom ✓ ✓ 15/16” TOEKICK CAP TKC 11/2” • Available in Maple and Oak. Finish Techniques Distressing Heirloom ✓ ✓ 3 /4 ” 47/16” 2 1 /4 ” 3/4” 3/4” 1 1/2” WINDOW CASING WINDOW CASING MODERN VALLEY FORGE VFR8 • Must be shimmed at shaded area if used with full overlay styles. • Sold in pairs. 2014 . Finish Techniques Distressing Heirloom LIGHT RAIL MOULDING LRM • One 8′ section. TB8LAM12 3 /4 ” Finish Techniques Distressing Heirloom ✓ 3 /8 ” 3 /8 ” 1” LIGHT BAFFLE 378 Grain 4 1 /2 ” Grain LB2 (Square) • One 8′ section. • One 8′ section. Grain 41 /2 ” Finish Techniques Distressing Heirloom 41 /2 ” 19/16” 3 /4 ” Square Baffle 1 /8 ” 1/4” 1 /2 ” • TB8LAM18 is 1/8″ Laminated Hardboard. Finish Techniques Distressing Heirloom ✓ WCT7 (7′) Finish Techniques Distressing Heirloom ✓ 13/4” 15/8” MOULDING 2 1 /4 ” 5 /8 ” RA Rustic Alder characteristics available Finished edges indicated by bold lines on side view drawings. • TB8LAM12 is 1/2″ Laminated Furniture Board. • Designed for use with all 3/4″ insert mouldings. SMALL LIGHT RAIL MOULDING • One 8′ section. Glazed edges indicated by arrows on side view drawings. Finish Techniques Distressing Heirloom ✓ • Two 48″ sections. • Not available for cabinets with Furniture Ends (FPEB) or Authentic Ends (AUTHL/AUTHR). Effective March 17. • Designed for use with all 3/4″ insert mouldings.DESCRIPTION MODEL DESCRIPTION MODEL CONTEMPORARY LIGHT RAIL JINSERTLRC MADELINE LIGHT RAIL INSERT JLRINSMAD • One 8′ section. • Not available in Hickory. • Pattern is 6″ repeat. • Pattern is 6″ repeat. • Pattern is 6″ repeat. • Not available in Hickory. DCM8 • Designed to set cabinets at a 45° corner application using 3/4″ end panels. • Not available in Hickory. • Not available in Hickory. • Two 48″ sections. • Pattern is 6″ repeat. Finish Techniques Distressing Heirloom Finish Techniques Distressing Heirloom ✓ 3/4” 1/4” CELTIC LIGHT RAIL INSERT JLRINSCELT • Two 48″ sections. Glazed edges indicated by arrows on side view drawings. 3 /4 ” Finish Techniques Distressing Heirloom ✓ 23/32” 1/4” Finished edges indicated by bold lines on side view drawings. • Not available in Hickory. 1/4” 3 /4 ” JLRINSCOS • One 8′ section. • Pattern is 6″ repeat. • Pattern is 6″ repeat. Finish Techniques Distressing Heirloom ✓ Glaze in Celtic Detail 3/4” DCM8 INSIDE CORNER DCM8 ICM8 • One 8′ section. Finish Techniques Distressing Heirloom ✓ Glaze in Baroque Detail Glaze in Weave Detail 3/4” 1/4” CORNER MOULDINGS 3/4” DIAGONAL CORNER 1/4” BIJOU LIGHT RAIL INSERT Glaze in Bijou Detail 1 5 /8 ” 15/16” JLRINSBIJ • Two 48″ sections. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 13/4” Glaze in Madeline Detail 3/4” 15/8” 379 1/4” LIGHT RAIL INSERTS ACANTHUS LIGHT RAIL INSERT JLRINSACAN MISSION LIGHT RAIL INSERT • Two 48″ sections. Glaze in Mission Detail 3/4” Finish Techniques Distressing Heirloom ✓ 1/4” Glaze in Acanthus Detail WEAVE LIGHT RAIL INSERT 3/4” 1/4” BAROQUE LIGHT RAIL INSERT JLRINSMIS JLRINSWEAVE • Two 48″ sections. 2014 MOULDING COSMO LIGHT RAIL INSERT Finish Techniques Distressing Heirloom . • Pattern is 6″ repeat. • Not available in Hickory. • One 8′ section. Finish Techniques Distressing Heirloom ✓ JLRINSBARO • Two 48″ sections. • Not available in Hickory. • Not available in Hickory. • Not available in Hickory. CONVEX INSIDE CORNER JRCPV72 SHM8 • • • • • One 8′ section. 5/8” JRPV72 Finish Techniques Distressing Heirloom 135 • • • • 5/8” 1 /4 ” Trimmable up to 1 3/4″ per side. • 3/4″ thick. • Bottom edge is profiled to match Brighton. Center height 8″. 63/4” or 123/4” STRAIGHT VALANCE 48”. 54”. 36”. Recommended for use with hearths. • 3/4″ thick. 42”. 48”. BAROQUE VALANCE JBV50 • Not available in Hickory and Oak. • JBV50 is trimmable 12 3/4″ on each end. Effective March 17. AV48 2 1/4” Finish Techniques Distressing Heirloom ✓ ✓ JRCPV30 30”-72” MOULDING/VALANCES Finish Techniques Distressing Heirloom ✓ ✓ RA Finish Techniques Distressing Heirloom ✓ ✓ Finish Techniques Distressing Heirloom ✓ Finished edges indicated by bold lines on side view drawings. • 3/4″ thick. 36”. 72” or 96” 4 1/2” VV48 VV72 VV96 • Trimmable. 60” or 72” 38” or 50” Finish Techniques Distressing Heirloom ✓ • Profiled bottom edge matches Brighton door edge.DESCRIPTION MODEL DESCRIPTION MODEL LARGE OUTSIDE CORNER LOSC8 FURNITURE VALANCE FV36 • One 8′ section. Recommended for use with hearths. JBV38 RA Rustic Alder characteristics available SV72 AV60 Finish Techniques Distressing Heirloom ✓ ✓ 63/4” or 123/4” SV48 AV72 8” 36”. RA 3 /4 ” 1 /2 ” SCALLOPED VALANCE VALANCES 48” or 72” ARCHED VALANCE AV36 4 1/2” 8” 4 1/2” Finish Techniques Distressing Heirloom • Side shoulders are 8″ wide (6″ trimmable each end). 60” or 72” 1 /4 ” JRPV42 JRPV48 121/2” OUTSIDE CORNER 135° JRPV54 21/8” OC135 21/2” JRPV60 • One 8′ section. • 3/4″ thick. and Bayport door edge profiles. Not available in Hickory. see page 162. • Bottom edge has 3/16″ radius profile on face. 1 /2 ” Finish Techniques Distressing Heirloom Radius Trimmable up to 1 3/4″ per side. Not available in Hickory. 48”. 48”. 1” FV48 2 1/4” Finish Techniques Distressing Heirloom 1” 8” FV72 8” • Side shoulders are 8″ wide (6″ trimmable each end). 2014 . 3/4” Finish Techniques Distressing Heirloom 1 /4 ” 3 /4 ” RAISED PANEL ARCH VALANCE JRPV30 JRPV36 30”. 60” or 72” 1 /4 ” OUTSIDE CORNER 380 FV60 4 1/2” 1 /4 ” RA OCM8 • One 8′ section. • Trimmable. RA QUARTER ROUND MOULDING QRM • One 8′ section. see page 162. Windham. 6” • JBV38 is trimmable 6 3/4″ on each end. Center height 8″. Glazed edges indicated by arrows on side view drawings. • Bottom edge has 3/16″ radius. 11/16” Radius Finish Techniques Distressing Heirloom RECESSED PANEL ARCH VALANCE 11/16” JRCPV36 JRCPV42 JRCPV48 121/2” JRCPV54 21/8” 11/16” JRCPV60 21/2” SHOE . • Not available in Oak. • Cannot be installed on valances. SCROLL ROSETTE ROSETTESCR • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 213/16” 48” 213/16” 9/16” TRADITIONAL ROSETTE TROSETTE 3” Finish Techniques Distressing Heirloom ✓ 3/4” GRAPE OVERLAY GROVLY 27 /8 ” • Apply with small brad. • Not available in Oak and Hickory. • Not available in Oak and Hickory. 2 7/8” 5” 5/8” CELTIC OVERLAY JCELOVLY 381 1 9/16” • Not available in Alder and Hickory. Finish Techniques Distressing Heirloom ✓ 4 1/2” 20” 3 /8 ” CORNER ROSETTE. • Not available in Hickory. 2014 . 20” 3” Finish Techniques Distressing Heirloom ✓ 4 1/2” 5/8” EMBELLISHMENTS DESCRIPTION DECORATIVE OVERLAYS Back Views of Rosette 3” 1/2” Fluted 3” 1/2” Beaded Effective March 17. 3″ 5/8” FFRC3X3 (Fluted) BFRC3X3 (Beaded) 3” SHELL OVERLAY SHOVLY Finish Techniques Distressing Heirloom • Apply with small brad. MISSION ROSETTE ROSETTEMIS • Apply with small brad. Hickory. and Rustic Alder. • Not available in Oak and Hickory. Alder. • Cannot be installed on valances. 5/16” 23” Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 43/4” 27/8” 5/8” 7 /8 ” 2 7 /8 ” CORINTHIAN OVERLAY JCOROVLY • Not available in Hickory. • Cannot be installed on valances.MODEL DESCRIPTION DECORATIVE ORNAMENTS MODEL ACANTHUS OVERLAY ACOVLY ACANTHUS ORNAMENT ACO • Apply with small brad. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 4 1/2” 20” • Apply with small brad. • Trimmable. 3” Finish Techniques Distressing Heirloom ✓ 1/2” 8” DECORATIVE SUPPORTS ACANTHUS LEG. 35 1/4″ HIGH JACANTHUSLEG • Not available in Hickory. 33/4” 93/8” Fluted Finish Techniques Distressing Heirloom ✓ 33/4” 3” 1/2” 197/8” 351/4” Beaded CORNER ROSETTE. 7/16” 27/8” Finish Techniques Distressing Heirloom ✓ 27/8” Effective March 17. 6” Finish Techniques Distressing Heirloom 6” 33/4” BAR LEG. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 8” 27/8” 382 Back View of Block 3/8” 27/8” 6” 3 /4 ” PLINTH BLOCK FILLER. • Available only as fluted. 2014 . 6″ FFP6X8 (Fluted) 3/16” 6” • Not available in Alder and Hickory. 3″ FFP3X8 (Fluted) Back Views of Block 3” BFPC3X8 (Beaded) • Not available in Hickory. 6″ FFRC6X6 (Fluted) 6” • Available only as fluted. 2-SIDED. 27/8” 1/2” Finish Techniques Distressing Heirloom ✓ 27/8” 21/4” MISSION TILE JTILEMISSION • Not available in Hickory.EMBELLISHMENTS DESCRIPTION MODEL DESCRIPTION MODEL CELTIC ROSETTE ROSETTCELT PLINTH BLOCK FILLER. Finish Techniques Distressing Heirloom ✓ 6” 3/4” 421/4” ACANTHUS TILE JTILEACAN 331/4” • Not available in Hickory. 42 1/4″ HIGH 3 3 /4 ” 3 3/ 4 ” 9” Back View of Rosette 33/4” Taper 2 Sides 2SBARLEG • Not available in Hickory. • Trimmable. Field assembly required. 421/4” Finish Techniques Distressing Heirloom ✓ 22” 341/2” 5” 133/4” 33/4” 51/2” 33/4” ENGLISH ISLAND COLUMN. Field assembly required. • Trimmable.MODEL DESCRIPTION MODEL BAR LEG. Finish Techniques Distressing Heirloom ✓ 351/4” 271/4” 421/4” EMBELLISHMENTS DESCRIPTION 383 331/4” 4” 33/4” ENGLISH COUNTRY LEG. • Leg is designed with three pieces joined together. 2014 . • Trimmable. 3 3 /4 ” Finish Techniques Distressing Heirloom ✓ 3 3 /4 ” 9” 4” 33/4” 33/4” Taper 4 Sides 33/4” • Not available in Hickory. 35 1/4″ HIGH 5” 151/4” 5” ENGISLCOLUMN • Not available in Hickory. • Leg is designed with three pieces. 33/4” 33/4” 151/4” ENGBARCOLUMN • Not available in Hickory. • Trimmable. • Trimmable. • Trimmable. 42 1/4″ HIGH 4SBARLEG COSMO LEG. 42 1/4″ HIGH 41/2” 33/4” 45/8” 33/4” 151/4” BUFFET LEG. 5″ WIDE. 34 1/2″ HIGH JBAROQUELEG • Not available in Hickory and Oak. 35 1/4″ HIGH JCOSMOLEG • Not available in Hickory. • Trimmable. Finish Techniques Distressing Heirloom ✓ 351/4” 5” 5” Effective March 17. 15” 5” 341/2” 24” 33/4” ENGLISH BAR COLUMN. 34 1/2″ HIGH Finish Techniques Distressing Heirloom ✓ JBUFFETLEG • Not available in Hickory. 11/2” 3” Finish Techniques Distressing Heirloom ✓ 351/4” Finish Techniques Distressing Heirloom ✓ 51/2” 6” 151/4” JENGCNTYLEG • Not available in Hickory. 4-SIDED. 35 1/4″ HIGH 2 1 /4 ” 33/4” 33/4” BAROQUE LEG. • Trimmable. EMBELLISHMENTS DESCRIPTION MODEL DESCRIPTION MODEL SMALL ESTATE LEG. • Trimmable. • Trimmable. 35 1/4″ HIGH JESTATELEGSS • Not available in Hickory. 35 1/4″ HIGH JFLUTELEGSS • Not available in Hickory. 55/16” 213/16” 23/4” 23/4” SMALL ESTATE LEG SPLIT. 2014 . 2 3/4″ WIDE. 2 3/4″ WIDE. 2 3/4″ WIDE. 33/4” 1113/16” 33/4” CLASSIC FLUTED LEG. 35 1/4″ HIGH JESTATELEG • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ 351/4” 209/16” 351/4” 1915/16” 27/8” 55/16” 33/4” 33/4” Effective March 17. Finish Techniques Distressing Heirloom ✓ 15/16” 10” 23/4” 351/4” 351/4” 209/16” 1915/16” 213/16” 55/16” 23/4” 23/4” ESTATE LEG. 15/16” 117/8” Finish Techniques Distressing Heirloom ✓ 23/4” SMALL CLASSIC FLUTED LEG SPLIT. 35 1/4″ HIGH JFLUTELEGS • Not available in Hickory. 23/4” 117/8” 23/4” Finish Techniques Distressing Heirloom ✓ 23/4” 351/4” 10” 351/4” Finish Techniques Distressing Heirloom ✓ 23/4” 1915/16” 209/16” 384 • Not available in Hickory. 2 3/4″ WIDE. • Trimmable. 35 1/4″ HIGH Finish Techniques Distressing Heirloom ✓ 33/4” 10” 33/4” JFLUTELEG • Not available in Hickory. • Trimmable. 35 1/4″ HIGH JESTATELEGS SMALL CLASSIC FLUTED LEG. • Trimmable. • Trimmable. 33/4” Finish Techniques Distressing Heirloom ✓ 33/4” 111/4” 421/4” 421/4” • Not available in Hickory. 35 1/4″ HIGH 5” Finish Techniques Distressing Heirloom ✓ 351/4” 111/4” 351/4” JFRNCNTYLEGL • Not available in Hickory. • Trimmable. 35 1/4″ HIGH 33/4” 111/4” 33/4” JFRNCNTYLEG • Not available in Hickory. • Trimmable. ISLAND LEG. 42 1/4″ HIGH JFRNCNTYLEGT 33/4” 10” • Not available in Hickory. 5″ WIDE. • Trimmable. 35 1/4″ HIGH 3 3 /4 ” Finish Techniques Distressing Heirloom ✓ 33/4” 9” 33/4” 2SISLLEG • Not available in Hickory. 42 1/4″ HIGH JFLUTELEGT FRENCH COUNTRY LEG. Finish Techniques Distressing Heirloom ✓ 33/4” 221/4” 2615/16” 385 41/2” 55/16” 41/4” 33/4” 33/4” CLASSIC FLUTED LEG. Finish Techniques Distressing Heirloom ✓ Taper 2 Sides 351/4” EMBELLISHMENTS DESCRIPTION 151/4” 351/4” 261/4” 41/2” 41/4” 33/4” 21/4” Effective March 17. • Trimmable. 2014 . • Trimmable. • Trimmable. FRENCH COUNTRY LEG. 5″ WIDE. 2-SIDED.MODEL DESCRIPTION MODEL CLASSIC FLUTED LEG. 35 1/4″ HIGH 5” 10” 5” JFLUTELEGL • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ 5” 151/4” 1915/16” 41/2” 55/16” 41/4” 5” 5” FRENCH COUNTRY LEG. 40 5/8″ HIGH 51/2” 3 3 /4 ” 3 3 /4 ” METBARCOLUMN • Not available in Hickory. 21/2” Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 31/2” 31/2” 301/2” 351/4” 386 261/4” 421/4” 113/4” 2 1 /4 ” METRO BAR COLUMN. • Trimmable. • Trimmable. • Trimmable. 4-SIDED. 34 1/2″ HIGH DLEGMISSION • Not available in Hickory. 34 1/2″ HIGH Finish Techniques Distressing Heirloom ✓ 6” JRDLEGL • Not available in Hickory. 5″ WIDE. • Not available in Hickory. 3 1 /2 ” 3 1 /2 ” Finish Techniques Distressing Heirloom ✓ 341/2” 405/8” 5 3 /8 ” 5 1 /2 ” 33/4” METRO ISLAND COLUMN. 35 1/4″ HIGH 4SISLLEG QUEEN ANNE LEG. 42 1/4″ HIGH JQUNANNELEG 3 3 /4 ” 3 3 /4 ” 9” 3 3 /4 ” Taper 4 Sides • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ 31/2” REED LEG. • Trimmable. • Trimmable. • Leg is designed with three pieces joined together. • Trimmable. 34 1/2″ HIGH 5 3 /8 ” RDLEG • Not available in Hickory. 3” 73/4” 3” REED LEG. 2014 . 5” 5” Finish Techniques Distressing Heirloom ✓ 341/2” 221/2” 341/2” 6” 3” 5” Effective March 17. • Leg is designed with three pieces joined together. 40 1/2″ HIGH • Not available in Hickory. • Trimmable. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 401/2” 345/8” 281/2” 5 1 /2 ” 6” 3” 31/2” MISSION LEG. 6” 31/2” 31/2” JRDLEGT • Not available in Hickory.EMBELLISHMENTS DESCRIPTION MODEL DESCRIPTION MODEL ISLAND LEG. 34 5/8″ HIGH 3” 5 1 /2 ” 3” METISLCOLUMN REED LEG. • Trimmable. 35 1/4″ HIGH JROPELEGSS • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ CLASSIC ROPE LEG. • Trimmable. • Trimmable. Finish Techniques Distressing Heirloom ✓ SMALL CLASSIC ROPE LEG SPLIT. 2 3/4″ WIDE. Finish Techniques Distressing Heirloom ✓ 351/4” 197/8” 351/4” 1915/16” 43/4” 5” 55/16” 33/4” Effective March 17. 42 1/4″ HIGH 33/4” 10” 33/4” JWEAVELEGT • Not available in Hickory. 2014 . 35 1/4″ HIGH JROPELEGS 33/4” 10” 33/4” • Not available in Hickory. • Trimmable. Finish Techniques Distressing Heirloom ✓ 15/16” 23/4” 10” 421/4” 267/8” 351/4” 1915/16” 53/8” 55/16” 33/4” 23/4” ROMAN WEAVE LEG. • Trimmable. 23/4” Finish Techniques Distressing Heirloom ✓ 10” Finish Techniques Distressing Heirloom ✓ 23/4” 351/4” 351/4” 197/8” 1915/16” 53/8” 387 55/16” 33/4” 23/4” ROMAN WEAVE LEG. 5″ WIDE. • Trimmable. 35 1/4″ HIGH 33/4” 10” EMBELLISHMENTS DESCRIPTION 33/4” JROPELEG • Not available in Hickory. • Not available in Hickory.MODEL DESCRIPTION MODEL ROMAN WEAVE LEG. • Trimmable. 2 3/4″ WIDE. 35 1/4″ HIGH JWEAVELEG SMALL CLASSIC ROPE LEG. 35 1/4″ HIGH 5” 105/8” 5” JWEAVELEGL • Not available in Hickory. 35 1/4″ HIGH 3” 17/16” JSQISLLEG3S • Not available in Hickory. • Trimmable. 35 1/4″ HIGH JSPLEGSS • Not available in Hickory. 75/8” Finish Techniques Distressing Heirloom ✓ 31/2” Finish Techniques Distressing Heirloom ✓ 5” 2011/16” 341/2” 351/4” 1915/16” 63/8” 55/16” 5” SPOOL LEG. • Trimmable. 40 1/2″ HIGH SMALL SPOOL LEG. Finish Techniques Distressing Heirloom ✓ 23/4” 10” 351/4” 421/4” 1915/16” 2615/16” 388 55/16” 55/16” 23/4” 33/4” CLASSIC ROPE LEG. 33/4” 10” 15/16” Finish Techniques Distressing Heirloom ✓ 33/4” • Not available in Hickory. 31/2” Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 401/2” 2613/16” 351/4” 1915/16” 63/8” 55/16” 23/4” 31/2” SQUARE ISLAND LEG SPLIT. • Trimmable. 34 1/2″ HIGH JROPELEGL SPLEG • Not available in Hickory. 35 1/4″ HIGH 23/4” 10” 23/4” JSPLEGS 31/2” 75/16” • Not available in Hickory. • Trimmable. • Trimmable. 2 3/4″ WIDE.EMBELLISHMENTS DESCRIPTION MODEL DESCRIPTION MODEL CLASSIC ROPE LEG. 2 3/4″ WIDE. • Trimmable. JSPLEGT • Not available in Hickory. • Trimmable. 31/2” • Not available in Hickory. 3” Finish Techniques Distressing Heirloom ✓ 351/4” Effective March 17. 2014 . 35 1/4″ HIGH 5” 10” SPOOL LEG. 5″ WIDE. 42 1/4″ HIGH JROPELEGT SMALL SPOOL LEG SPLIT. 42 1/4″ HIGH JSQBARLEG3 3” • Not available in Hickory. 42 1/4″ HIGH 351/4” 6” JSQBARLEG6 • Not available in Hickory. 35 1/4″ HIGH JSQISLLEG3 SQUARE BAR LEG. 2014 . 3″ x 3″. 35 1/4″ HIGH 6” 6” 6” JSQISLLEG6 • Not available in Hickory. 4″ x 4″. • Trimmable. 35 1/4″ HIGH 4” 389 JSQISLLEG4 • Not available in Hickory. 6″ x 6″. 3” 3” 3” Finish Techniques Distressing Heirloom ✓ 3” • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ 3” 351/4” 421/4” SQUARE ISLAND LEG. Finish Techniques Distressing Heirloom ✓ 421/4” Effective March 17. Finish Techniques Distressing Heirloom ✓ 4” 351/4” 421/4” SQUARE ISLAND LEG. 6″ x 6″. • Trimmable. Finish Techniques Distressing Heirloom ✓ SQUARE BAR LEG. • Trimmable. 3″ x 3″. 4″ x 4″. • Trimmable. 4” Finish Techniques Distressing Heirloom ✓ 4” SQUARE BAR LEG. 42 1/4″ HIGH 4” 4” JSQBARLEG4 • Not available in Hickory. • Trimmable.MODEL DESCRIPTION MODEL SQUARE ISLAND LEG. • Trimmable. 42 1/4″ HIGH 3” 17/16” 3” JSQBARLEG3S EMBELLISHMENTS DESCRIPTION 421/4” • Not available in Hickory. • Trimmable. Finish Techniques Distressing Heirloom ✓ 6” 6” SQUARE BAR LEG SPLIT. 2014 . 33/4” 105/8” 33/4” ABBE FOOT. 33/4” Finish Techniques Distressing Heirloom ✓ 33/4” 105/8” 341/2” 155/8” 421/4” 390 2615/16” 7” 31/2” 411/16” TULIP LEG. or Rustic Alder wood species. 34 1/2″ HIGH JTULIPLEG URN LEG. Hickory. 5” 105/8” Finish Techniques Distressing Heirloom ✓ 5” 401/2” 215/8” 351/4” 1915/16” 7” 411/16” 31/2” 5” URN LEG. ABFOOT • Not available in Hickory. • Trimmable. • Trimmable. 42 1/4″ HIGH JURNLEGT • Not available in Hickory. • Not available in Oak. 35 1/4″ HIGH JURNLEG • Not available in Hickory. 6″ HIGH 411/16” 2” 33/4” 2” FRNLG • Trimmable. 31/2” 117/8” 33/4” Finish Techniques Distressing Heirloom ✓ 31/2” URN LEG.EMBELLISHMENTS DESCRIPTION MODEL DESCRIPTION MODEL TULIP LEG. 5″ WIDE. 4″ HIGH 21/2” dia. 31/2” 117/8” Finish Techniques Distressing Heirloom ✓ 31/2” • Not available in Hickory. • Trimmable. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 4” 351/4” 1915/16” 11/32” FRENCH LEG. • Trimmable. 40 1/2″ HIGH JTULIPLEGT • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ 2” 6” 4” Effective March 17. • Trimmable. 35 1/4″ HIGH JURNLEGL • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ 6” Effective March 17. 4 1/2″ HIGH 3” JCRAFTFOOT • Not available in Hickory. 3” Finish Techniques Distressing Heirloom ✓ 61/8” 27/8” COSMO FOOT 4” JCOSFOOT 4” • Not available in Hickory. 4” Finish Techniques Distressing Heirloom ✓ 4” 45/8” CRAFTSMAN FOOT. METROPOLITAN FOOT. 6″ HIGH 35/8” JFRNCNTYFOOT • Not available in Hickory. 4 1/2″ HIGH JBIJFOOT • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 41/2” 41/2” 21/2” EMBELLISHMENTS DESCRIPTION 37/8” 391 BIJOU FOOT. 4 1/2″ HIGH JACANFOOT MADELINE FOOT JMADEFOOT 33/8” • Not available in Hickory. 4” • Not available in Hickory. Finish Techniques Distressing Heirloom ✓ 41/2” 41/2” 35/8” FRENCH COUNTRY FOOT. WEAVE FOOT. 4 5/8″ HIGH 4” Finish Techniques Distressing Heirloom ✓ JMETROFOOT • Not available in Hickory. 4” MADISON FOOT. 4 1/2″ HIGH 47/8” Finish Techniques Distressing Heirloom ✓ JWEAVEFOOT • Not available in Hickory. 6 1/8″ HIGH Finish Techniques Distressing Heirloom ✓ 41/2” JMADFOOT • Not available in Hickory.MODEL DESCRIPTION MODEL ACANTHUS FOOT. • Trimmable. 2014 . EMBELLISHMENTS DESCRIPTION MODEL DESCRIPTION LARGE SQUARE FOOT, 5″ HIGH LGSQFOOT TAPERED LEG, 6″ HIGH • Trimmable. • Not available in Hickory. 5” 5” 2 1 /2 ” MODEL TAPLG 2 1 /2 ” • Trimmable. • Not available in Oak and Hickory wood species. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 6” 5” 4” 392 SQUARE FOOT JSQFOOT 31/4” 31/4” • Not available in Hickory. TOEKICK TULIP FOOT, 4 5/8″ HIGH 4” Finish Techniques Distressing Heirloom ✓ 21/2” TKTLFOOT • Not available in Hickory. • Trimmable. Finish Techniques Distressing Heirloom ✓ 41/2” 45/8” 6” SQUARE FOOT, SPLIT 15/8” 31/4” TULIP FOOT, 4 5/8″ HIGH JSQFOOTS 31/2” dia. TLFOOT • Trimmable. • Not available in Hickory. • Not available in Hickory. • Trimmable. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 4 5 /8 ” 41/2” 6” 3” 1 5 /8 ” LILLE FOOT, 4 1/2″ HIGH 4” 4” LIFOOT • Not available in Hickory. • LIFOOT is designed to work with Void Toekick Modification (VTK). Finish Techniques Distressing Heirloom ✓ 4 1 /2 ” PLINTH BLOCK, 4 1/2″ HIGH PLBLOCK • Trimmable. Finish Techniques Distressing Heirloom ✓ 4 1 /2 ” 3” 41 / 2” Effective March 17, 2014 MODEL DESCRIPTION MODEL 2″ DECORATIVE SPLIT TURNINGS SPTRINGEND (Sold in Pairs) 3″ DECORATIVE SPLIT TURNINGS J3SPTRINGBLK JSPTRINGCTR* J3SPTRINGFIN J3SPTRINGWV 15/16” 63/8” 97/16” SPTRINGREED30 (Reeded Half Round) 2” SPTRINGREED60 (Reeded Half Round) 2” J3SPTRINGSP96 SPTRINGREED96 (Reeded Half Round) SPTRINGEND 11/16” J3SPTRINGCTR 513/16” 21/8” 31/8” SPTRINGROPE30 (Rope Right Twist Half Round) JSPTRINGCTR SPTRINGROPE60 (Rope Right Twist Half Round) J3SPTRINGRP96 3” J3SPTRINGRD96 J3SPTRINGFL96 17/16” • Ends sold separately. • Not available in Hickory. 3” J3SPTRINGBLK Finish Techniques Distressing Heirloom ✓ 23/8” 13/16” SPTRINGROPE96 (Rope Right Twist Half Round) 43/16” SPTRINGSPOOL30 (Half Round) 30”, 60”, or 96” 3/4” 11/2” 30”, 60”, or 96” 3/4” 11/2” SPTRINGSPOOL60 (Half Round) SPTRINGSPOOL96 (Half Round) J3SPTRINGFIN 27/8” 13/8” JSPTRINGFLT96* (Half Round) SPTRINGREED__ SPTRINGROPE__ • Ends sold separately from split turnings. • 5 day Express Response not available on Architectural Accents. *JSPTRINGCTR and JSPTRINGFLT96 are not available in Hickory. Finish Techniques Distressing Heirloom ✓ 30”, 60”, or 96” 3/4” 11/2” 3/4” 96” 11/2” 1” 96” 31/2” 2” J3SPTRINGWV 27/8” 17/16” J3SPTRINGRD96 31/2” J3SPTRINGCTR 1” 96” 2” 1” SPTRINGSPOOL__ JSPTRINGFLT96 96” 2” J3SPTRINGFL96 J3SPTRINGSP96 15/16” 96” 2” J3SPTRINGRP96 Effective March 17, 2014 EMBELLISHMENTS DESCRIPTION 393 EMBELLISHMENTS DESCRIPTION MODEL DESCRIPTION MODEL 9″ SMALL CORBEL SMCORBEL 7″ SMALL COSMO CORBEL JCORBELCOS7 5 3 /4 ” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Finish Techniques Distressing Heirloom ✓ 9” 613/16” Finish Techniques Distressing Heirloom ✓ 51/2” 9″ ART CORBEL • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 37/8” 13″ LARGE COSMO CORBEL 61/16” 394 31/2” JCORBELCOS13 • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 23/4” CORBELART9 • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 9” 13” Finish Techniques Distressing Heirloom ✓ 33/4” 57/8” Finish Techniques Distressing Heirloom ✓ 13″ LARGE CORBEL 13″ LARGE COSMO CORBEL DEEP LGCORBEL 27/8” 51/2” JCORBELCOS13D • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 9” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom ✓ 13” 13” 6″ MISSION CORBEL 93/16” 10″ BAROQUE CORBEL 5/8” 13/8” 2 3 /4 ” CORBELBARO • Not available in Oak and Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. CORBELMIS6 2 5 / 8” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 6” Finish Techniques Distressing Heirloom ✓ 9″ MISSION CORBEL Finish Techniques Distressing Heirloom ✓ 53 /4 ” CORBELMIS9 3 7 /8 ” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 101/2” Open 9” Finish Techniques Distressing Heirloom ✓ 57/8” 4″ OLDE WORLD CORBEL 7″ CELTIC CORBEL 31/2” CORBELCELT 5/8” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 7” Open Finish Techniques Distressing Heirloom ✓ JCORBELOWD4 41/8” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 41/2” Finish Techniques Distressing Heirloom ✓ 5″ OLDE WORLD CORBEL CORBELOWD5 5 3 /4 ” 7” 5” 5” 1 3 /4 ” 4 1 /2 ” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Finish Techniques Distressing Heirloom ✓ Effective March 17, 2014 MODEL DESCRIPTION MODEL 7″ OLDE WORLD CORBEL JCORBELOWD7 14″ ARTS & CRAFTS OPEN CORBEL JCORBELARTO 51/2” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 67/8” 73/8” 41/2” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Finish Techniques Distressing Heirloom ✓ 71/2” Finish Techniques Distressing Heirloom ✓ 14” EMBELLISHMENTS DESCRIPTION Open 6″ SCROLL CORBEL 21 / 2 ” CORBELSCR6 23 /4 ” 53/4” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Open 395 14″ BIJOU CORBEL Finish Techniques Distressing Heirloom ✓ 9″ SCROLL CORBEL 3 7 /8 ” JCORBELBIJ 71/16” 51/2” Finish Techniques Distressing Heirloom ✓ CORBELSCR9 • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 5 3 /4 ” 8 5 /8 ” Open 14” Finish Techniques Distressing Heirloom ✓ 12″ CRAFTSMAN OPEN BRACKET SNACK BAR SUPPORT 111/4” SBS 3” 31/2” JCORBELCRAFTO 111/4” Finish Techniques Distressing Heirloom ✓ 5″ ACANTHUS CORBEL • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 5” Finish Techniques Distressing Heirloom ✓ 10″ ACANTHUS CORBEL JCORBELACAN10 31/2” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 10” Finish Techniques Distressing Heirloom ✓ 11 1/2″ ARTS & CRAFTS BRACKET JBRACKETART • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 71/2” 5” 13/4” Open 111/2” 93/4” Finish Techniques Distressing Heirloom Open 12” JCORBELACAN5 2” 31/2” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 8” • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 3” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 4″ SMALL MADELINE CORBEL 2” JCORBELMAD4 • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 23/4” 4” Finish Techniques Distressing Heirloom ✓ 6″ MEDIUM MADELINE CORBEL 21/2” 61/8” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Finish Techniques Distressing Heirloom ✓ 8” 9″ LARGE MADELINE CORBEL 4” Finish Techniques Distressing Heirloom ✓ JCORBELMAD6 JCORBELMAD9 91/2” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Finish Techniques Distressing Heirloom ✓ 14” 31/4” Effective March 17, 2014 EMBELLISHMENTS 396 DESCRIPTION MODEL DESCRIPTION MODEL 3″ MINI SHAKER CORBEL JCORBELSHKR3 7 1/16″ WEAVE CORBEL JCORBELWEAVE7 11/4” 11/2” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 3” 37/8” • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 45/8” 71/16” Finish Techniques Distressing Heirloom ✓ 6 1/2″ SMALL SHAKER CORBEL 37/8” JCORBELSHKR7 Finish Techniques Distressing Heirloom ✓ 14 1/8″ WEAVE CORBEL • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 31/2” 55/8” 7” JCORBELWEAVE14 • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. Finish Techniques Distressing Heirloom ✓ 61/2” Finish Techniques Distressing Heirloom ✓ 141/8” 31/4” 13 3/8″ MEDIUM SHAKER CORBEL 51/4” JCORBELSHKR14 • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 65/8” Finish Techniques Distressing Heirloom ✓ SINGLE OUTLET COVER JSOC • Not available in Hickory. Finish Techniques Distressing Heirloom 53/4” 133/8” 31/2” 315/16” SINGLE ROCKER PLATE JSRC • Not available in Hickory. 16″ LARGE SHAKER CORBEL 613/16” JCORBELSHKR16 • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 71/2” Finish Techniques Distressing Heirloom ✓ Finish Techniques Distressing Heirloom 53/4” 31/2” 16” 53/8” 14″ TRADITIONAL OPEN CORBEL 31/2” JCORBELTRADO • Not available in Hickory. • Not intended for cabinet or freestanding countertop support. For substantial weight support, use a floor mounted support such as a Decorative Leg. 7” Finish Techniques Distressing Heirloom ✓ 14” Open Effective March 17, 2014 DESCRIPTION CUTLERY ORGANIZERS MODEL DESCRIPTION MODEL CUDD24 TIERED CUTLERY DIVIDERS−PLASTIC TCD15 COOKING UTENSIL DIVIDER CUDD30 811/16” CUDD36 25/8” TCD18 TCD21 8 1 /4 ” TCD24 3” • Pre-assembled natural wood drawer insert. 1815/16” bottom 915/16” top 1211/16” 25/8” 8 1 /4 ” 3” 191/2” 2415/16” 191/2” 1215/16” 25/8” Model Application TCD15 15″ Base TCD18 18″ Base TCD21 21″ Base TCD24 24″ Base • 1 1/2″ sliding trays, molded gloss white plastic. • Specify product line when ordering. bottom • Place a cabinet with a TCD next to the dishwasher for convenience. top 1511/16” 191/2” 3015/16” 3” bottom 191/2” CUTLERY INSERT WOOD ORGANIZER 8 1 /4 ” 1515/16” CIW15 top CIW18 1811/16” 8 1 /4 ” CIW21 25 /8 ” 3” CIW24 191/2” 915/16” 2 5 /8 ” 191/2” 1215/16” 2 5 /8 ” 191/2” 1515/16” 191/2” 1815/16” Model Application CIW15 15″ Base CIW18 18″ Base CIW21 21″ Base CIW24 24″ Base 191/2” bottom 1815/16” top • Pre-assembled natural wood drawer insert. • CIW also available installed in B__CIW, B__RTCIW, and 4DB__CIW. See pages 173, 186, and 221. • Place a cabinet with a CIW next to the dishwasher for convenience. 2 5 /8 ” Effective March 17, 2014 397 CUTLERY ORGANIZERS 191/2” 191/2” DESCRIPTION MODEL WOOD TIERED CUTLERY DIVIDER DRAWER, 15″, 18″, 21″, and 24″ WTCD15 WTCD18 WTCD21 9” WTCD24 201/4” 33/4” 21” 117/16” 398 CUTLERY ORGANIZERS bottom Model Application WTCD15 15″ Base WTCD18 18″ Base WTCD21 21″ Base WTCD24 24″ Base • Replaces standard drawer (4 1/2″ high frame opening). Uses existing cabinet member drawer hardware. Cannot be used with 3/4X modification. • Requires field installation of drawer front. • For use with 24″ deep cabinets only. • Exterior WTCD drawer box height is 3 3/4″, interior height of top tier is 1 5/8″, and interior height of bottom tier is 1 3/8″. • Top divider slides front-to-back. top 12” 201/4” 33/4” 21” 147/16” bottom top 15” 201/4” 33/4” 21” 177/16” bottom top 18” 201/4” 33/4” 21” 207/16” bottom top Effective March 17, 2014 DESCRIPTION ROLL TRAY KITS MODEL MODEL ROLL TRAY KIT For 18″ Deep Cabinets NEW For 18″ Deep Cabinets DRT1218 NEW RT1218SP NEW DRT1518 NEW RT1518SP NEW DRT1818 NEW RT1818SP NEW DRT2118 NEW RT2118SP NEW DRT2418 NEW RT2418SP NEW DRT2718 NEW RT2718SP NEW DRT3018 NEW RT3018SP NEW DRT3318 NEW RT3318SP NEW DRT3618 NEW RT3618SP NEW DRT3918 NEW RT3918SP NEW DRT4218 NEW RT4218SP NEW DRT4518 NEW RT4518SP NEW DRT4818 NEW RT4818SP DEEP ROLL TRAY KIT 33/8” SP 63/8” DRT For 21″ Deep Cabinets For 21″ Deep Cabinets NEW DRT1221 NEW RT1221SP NEW DRT1521 NEW RT1521SP NEW DRT1821 NEW RT1821SP NEW DRT2121 NEW RT2121SP NEW DRT2421 NEW RT2421SP NEW DRT2721 NEW RT2721SP NEW DRT3021 NEW RT3021SP NEW DRT3321 NEW RT3321SP NEW DRT3621 NEW RT3621SP NEW DRT3921 NEW RT3921SP NEW DRT4221 NEW RT4221SP NEW DRT4521 NEW RT4521SP NEW DRT4821 NEW RT4821SP For 24″ Deep Cabinets For 24″ Deep Cabinets NEW 399 ROLL TRAY KITS DESCRIPTION NEW DRT12 RT12SP DRT15 RT15SP DRT18 RT18SP DRT21 RT21SP DRT24 RT24SP DRT27 RT27SP DRT30 RT30SP DRT33 RT33SP DRT36 RT36SP DRT39 RT39SP DRT42 RT42SP DRT45 RT45SP DRT48 RT48SP • RT_ _SP’s include roll tray, roll tray brackets, hardware, screws, and installation instructions. • 39″-48″ wide Roll Tray Kits will contain 1 roll tray. QTY of 2 must be ordered to achieve a roll tray in both cabinet openings. Custom Modification Availability ID • DRT_ _’s include deep roll tray, deep roll tray brackets, hardware, screws, and installation instructions. • 39″-48″ wide Deep Roll Tray Kits will contain 1 roll tray. QTY of 2 must be ordered to achieve a roll tray in both cabinet openings. Custom Modification Availability ID RD • Effective March 17, 2014 RD • hardware. screws and installation instructions. wooden hardware mounting bracket. must be purchased separately (see page 401). • 39″-48″ wide Deep Roll Tray Kits will contain 1 roll tray. wooden hardware mounting bracket. • 39″-48″ wide Roll Tray Kits will contain 1 roll tray. • DRT-ET’s contain roll tray. screws and installation instructions. • RT-ET’s contain roll tray. 2014 . hardware.DESCRIPTION MODEL DESCRIPTION ROLL TRAY KIT – EASYTRAX™ For 18″ Deep Cabinets DEEP ROLL TRAY KIT – EASYTRAX™ RT1518ET 400 ET For 18″ Deep Cabinets DRT1218ET DRT1518ET RT2118ET DRT1818ET DRT2118ET 63/8” RT2718ET DRT2418ET RT3018ET DRT2718ET RT3318ET DRT3018ET RT3618ET DRT3318ET RT3918ET DRT3618ET DRT3918ET DRT_ _ET RT4218ET ROLL TRAY KITS NEW RT1818ET RT2418ET 33/8” MODEL RT4518ET DRT4218ET RT4818ET DRT4518ET For 21″ Deep Cabinets DRT4818ET For 21″ Deep Cabinets RT1521ET RT1821ET NEW DRT1221ET RT2121ET DRT1521ET RT2421ET DRT1821ET RT2721ET DRT2121ET RT3021ET DRT2421ET RT3321ET DRT2721ET RT3621ET DRT3021ET RT3921ET DRT3321ET RT4221ET DRT3621ET RT4521ET DRT3921ET RT4821ET DRT4221ET For 24″ Deep Cabinets DRT4521ET RT15ET DRT4821ET For 24″ Deep Cabinets RT18ET RT21ET NEW DRT12ET RT24ET DRT15ET RT27ET DRT18ET RT30ET DRT21ET RT33ET DRT24ET RT36ET DRT27ET RT39ET DRT30ET RT42ET DRT33ET RT45ET DRT36ET RT48ET DRT39ET • EasyTrax™ uprights are required. must be purchased separately (see page 401). Custom Modification Availability ID RD • DRT42ET DRT45ET DRT48ET • EasyTrax™ uprights are required. QTY of 2 must be ordered to achieve a roll tray in both cabinet openings. Custom Modification Availability ID RD • Effective March 17. QTY of 2 must be ordered to achieve a roll tray in both cabinet openings. ETUPR40. 2014 401 ACCESSORIES & PARTS DESCRIPTION .5CS ETUPRIGHT ETUPRIGHTOV • EasyTrax™ system allows quick field installation of adjustable height roll trays with front and rear uprights to support roll tray guides. clearance above shelf is 18 7/8″. or 205/16” BBX18 BBX21 BBX24 BROOM CLIP Model Application BBX15 15″ Base BBX18 18″ Base BBX21 21″ Base BBX24 24″ Base BRMCLP 33/32” 13/64” 261/64” 127/16” Effective March 17. 175/16”. 145/16”. BREAD BOX LIDS 21” BBX15 115/16”. • Mixer shelf locks in the fully open position. • Insert consists of solid Maple sides and shelves.5 contains 2 front and 2 rear uprights. and 34 1/2″ high Vanities = 1 Utility Cabinets = 3 42″ and 48″ wide cabinets = 2. • Maximum Weight Capacity for Mixer Shelf: 30 lbs. • When installed in 34 1/2″ full-height cabinet and in closed position.MODEL EASYTRAX™ UPRIGHTS ETUPRIGHT ETUPRIGHTOV DESCRIPTION ACCESSORIES & PARTS MODEL BASE MIXER KIT MIXKIT18FH ETUPRIGHT40. • ETUPRIGHT40. BASE WASTEBASKET LIDS BWBLID BWBFHLID • Designed to be used with the BWB trash units. 21″ wide: 16″ wide x 18″ deep. Base Full Height. Release brackets lower the mixer shelf back into the cabinet. • ETUPRIGHT contains 2 front and 2 rear uprights. • ETUPRIGHTOV contains 2 front and 2 rear uprights.5 MIXKIT21FH ETUPRCS MIXKIT24FH • Mixer shelf dimensions: 18″ wide: 13″ wide x 18″ deep. Back is edgebanded plywood. QTY required: 40 1/2″ high Base cabinets = 1. BASE PAN STORAGE BPS24 BPS30 BPS36 Model ETUPR IGHT40. 24″ wide: 19″ wide x 18″ deep.5CS recommended for DRT39ET-DRT48ET kits to secure drawer guide in ET system on cabinets with center stiles. QTY required: Desk and 32″ high Vanity = 1. • ETUPRCS and ETUPR40. clearance below basket is 2″.5 Application BPS24 24″ Base BPS30 30″ Base BPS36 36″ Base • Roll tray not included. • Sold individually. QTY required: Base. attach cookbook rack to the bottom of the desired wall cabinet before cabinet is installed. 21”. 18”. 2 3/4″ overall height when installed in closed position (measured from the bottom of the cabinet). per pair. or 24” DGK15PG DGK18PG DGK21PG DGK24PG CD and DVD INSERT KITS CDI21 2 1 /2 ” CDI24 • Undermount full extension Smart Stop Premium Guide (PG). allow 3 1/4″ above top of roll tray for CDI and 3″ for DVDI. and FD______ cabinets. DGK_ _PG DGK12PG 12”. • Maximum Weight Capacity: 75 lbs. sockets and screws) Dimension refers to cabinet depth. Must be ordered separately.9 30″ 24″ CABMAT33 4. • DGK-BKSOCKET-SP used with SmartStop roll tray guides. Designed for cabinets 12″ or deeper. 18”.6 4. sockets and screws) Dimension refers to cabinet depth. • Maximum Weight Capacity: 75 lbs. 21”. 169/16” or 199/16” 8 3 /8 ” Model Application Capacity CDI21 21″ Deep Cabinet with Roll-Out Tray 20 CDs CDI24 24″ Deep Cabinet with Roll-Out Tray 24 CDs DVDI21 21″ Deep Cabinet with Roll-Out Tray 17 DVDs DVDI24 24″ Deep Cabinet with Roll-Out Tray 20 DVDs DGK24RTSP • Undermount full extension Smart Stop Premium Guide (SP) utilized on roll-out trays and roll trays specified with SP or ET upgrade. CBR • • • • Mounts under 21″ cabinet or wider. • For sufficient clearance.DESCRIPTION MODEL DESCRIPTION MODEL CABMAT™ CABMAT30 DRAWER GUIDE KITS DGK21DDFX CABMAT33 DGK_ _DDFX DGK24DDFX NEW 21” or 24” CABMAT36 229/16” 281/4”.0 4. per pair. per pair. and 33″ wide OCS______DD and OCD______DD cabinets. drawer front hardware screws must be countersunk. • Maximum Weight Capacity: 125 lbs. 311/4”.2 3. • Designed with a slope to capture spills and is removable for cleaning. or 341/4” Liquid Capacity Model ACCESSORIES & PARTS 402 • Side mount progressive full extension guide utilized on the bottom drawer of 3DB__DD cabinets and all drawers of DDFD____ cabinets. Effective March 17. 15”. • For ease of installation. • Kit includes guide hardware for one drawer box (cabinets and drawer members. drawer members wood vertical mounting rails and screws) Dimension refers to cabinet depth. Cabinet Size Quarts Liters Width Depth CABMAT30 4. sockets and screws) Dimension refers to cabinet depth.7 36″ 24″ COOKBOOK RACK DGK_ _DT DGK15DT 15”. • DGK-BKSOCKET-RD used with SmartStop drawer guides (12″-14″ deep). or 24” DGK18RTSP DVDI24 513/16” 2 1 /2 ” DGK21RTSP • Solid hardwood dovetailed box. • DGK-BKSOCKET-HD used on deep drawers in 30″-36″ wide 2DB__. DRAWER GUIDE BACK SOCKETS DGK-BKSOCKET-PG NEW DGK-BKSOCKET-RD DGK-BKSOCKET-SP NEW DGK-BKSOCKET-HD • DGK-BKSOCKET-PG used with SmartStop drawer guides (15″-24″ deep). • Maximum Weight Capacity: 75 lbs. 21”. • Kit includes guide hardware for one drawer box (cabinets and drawer members. • Kit includes guide hardware for one drawer box (cabinets and drawer members. • Kit includes guide hardware for one drawer box (cabinets. DGK_ _RTSP 169/16” or 199/16” DVDI21 DGK15RTSP 15”.3 33″ 24″ CABMAT36 5. per pair. Acrylic. 3DBB__. 18”. or 24” DGK18DT DGK21DT DGK24DT • 3/4 extension undermount drawer guide. 2014 . 3DB__. • When used in deep drawer applications. • Roll tray not included. order DGK18_ _ and two SPACERBLK. 3/4” 18”. and front and side edges (back edge is not finished). 30”. 48”. • Shelves can be ordered in APC. • Shelves can be ordered in APC. • Full Depth Shelves will be shipped separate from the cabinet. 36”. and 23″ depths order (2)SPACERBLK (pair). 24”. • Specify material when ordering. 21″ DEEP ES2118 • Sold in pairs • For use with DGK kits when RD is used for depths other than in 3″ increments. order shelf kit (SK____) with Matching Interior Plywood (MIP) modification. 12″ DEEP 12” 3/4” Grain 18”. 1” 3 1 /2 ” FALSE PANEL CLIPS ES2124 ES2130 ES2136 ES2148 ES2196 • Wood 3/4″ panels are veneered furniture board finished both sides. For 13″. and 22″ depths order (1)SPACERBLK (pair). • Not available in wood grain laminates. 48”. See page 26 for construction details. • Shelves can be ordered in APC. order DGK15_ _ and one SPACERBLK. 24”. 24”. • Not available in wood grain laminates. • Not available in wood grain laminates. or 96” ES2436 ES1224 ES2448 ES1230 ES2496 ES1236 Custom Modification Availability • Wood 3/4″ panels are veneered furniture board finished both sides. 16″. Finish Techniques Distressing Heirloom Effective March 17. 18”. 30”. For 14″. • One SPACERBLK required for each inch of depth. 36”. 18″ DEEP Custom Modification Availability Grain 403 Custom Modification Availability ID • SK3612 SK3912 SK4212 RD • Finish Techniques Distressing Heirloom SK4812 • One shelf. 48”. 10 1/2″ deep. or 96” 3/4” Custom Modification Availability Grain ES1818 ES1830 3/4” Finish Techniques Distressing Heirloom ES2430 ES1218 • Wood 3/4″ panels are veneered furniture board finished both sides. 48”. or 96” EXTERIOR SHELVES. 17″. 24”. Grain RD • ES2424 ES1296 18” ID • ES2418 ES1248 EXTERIOR SHELVES. 20″. • Each kit includes 8 shelf pegs. and front and side edges (back edge is not finished). 36”. 30”. 30”. 2014 ACCESSORIES & PARTS 213/16” . • For 16″ deep. • If matching interior is desired. • For 20″ deep.DESCRIPTION MODEL DESCRIPTION MODEL SPACER BLOCK SPACERBLK EXTERIOR SHELVES. 19″. 36”. • Shelves can be ordered in APC. ID • 24” RD • Finish Techniques Distressing Heirloom RD • Finish Techniques Distressing Heirloom 18”. • Not available in wood grain laminates. and front and side edges (back edge is not finished). 24″ DEEP EXTERIOR SHELVES. • Use to secure false front on sink base. or 96” FULL DEPTH SHELVING To Fit 12″ Deep Cabinets ID • SK912 SK1212 SK1512 ES1824 3/4” 101/2” Grain SK1812 SK2112 ES1836 SK2412 ES1848 SK2712 ES1896 SK3012 SK3312 • Wood 3/4″ panels are veneered furniture board finished both sides. • Shelving material specific to construction option. FALSEPANELCLIP PENFALSEPNLCLIP 21” • Clips come in pairs of two. and front and side edges (back edge is not finished). DIAGONAL JGSKDW24 (Fits DW.Pewter Faux Barrel Hinge HINGEFH3 . All 36″ high and above use 3 hinges. • Faux Barrel Hinge: All 12″ . • Shelving material specific to construction option.30″ high doors use 2 hinges. • Not compatible with the FFD modification.30″ high doors use 2 hinges. • Kit includes two 1/4″ tempered shelves.2424) JGSKDW27 (Fits DW. Custom Modification Availability ID HINGEFH3 RD Effective March 17. • ID available in 1″ increments to 18″ deep. 6″ & 9″ DEEP JGSK1212 JGSK2406 JGSK2706 JGSK3006 1 /4 ” JGSK3306 JGSKDW27 JGSK3606 JGSK1209 HARDWARE— FAUX HINGES JGSK1509 JGSK1809 HINGEFH1 . Custom Modification Availability GLASS SHELF KIT. JGSK3609 • JGSK cannot be trimmed.Black Faux Strap Hinge JGSK2109 JGSK2409 JGSK2709 JGSK3009 HINGEFH1 HINGEFH2 JGSK3309 • Faux Strap Hinge: All 12″ . • Not available for 24″ and 27″ high Diagonal Wall cabinets.. order shelf kit (SK____) with Matching Interior Plywood (MIP) modification.2727) JGSK1506 JGSKDW24 JGSK2106 43/16” or 73/16” RD 1 /4 ” JGSK1206 JGSK1806 1 /4 ” ID • • JGSK cannot be trimmed. • Example: JGSK1512 = 13 9/32″ wide x 10 3/16″ deep fits in W1530x12 Deep Cabinet.DESCRIPTION MODEL DESCRIPTION MODEL FULL DEPTH SHELVING To Fit 24″ Deep Cabinets SK924 GLASS SHELF KIT. • Kit includes two 1/4″ tempered shelves. • Each kit includes 8 shelf pegs. All 42″ high and above use 3 hinges. See page 26 for construction details. • For use with LaGrange door style. ACCESSORIES & PARTS SK4224 SK4824 • One shelf. • Specify material when ordering. 2014 . 12″ DEEP JGSK912 SK1224 SK1524 Grain 3/4” 221/2” JGSK1512 SK1824 JGSK1812 1/4” SK2124 JGSK2112 103/16” SK2424 404 JGSK2412 SK2724 JGSK2712 SK3024 JGSK3012 SK3324 JGSK3312 SK3624 JGSK3612 SK3924 • JGSK cannot be trimmed. • Kit includes two 1/4″ tempered shelves. • Full Depth Shelves will be shipped separate from the cabinet. • Example: JGSK1206 = 10 9/32″ x 4 3/16″ to fit W1230x6 cabinet. 22 1/2″ deep. Shelf will not fit through door opening.Antique Brass Faux Barrel Hinge HINGEFH2 . • If matching interior is desired. • Requires field installation.. Finish Techniques Distressing Heirloom GLASS SHELF KIT. Red Rust Antique .Red Rust Antique (1 1/4″W x 1″H) KNOBH57 .Satin Nickel .96mm C/C (7/16″ x 4 15/16″L) PULLH34 .Oil Rubbed Bronze .Ultra Brush Nickel (1″W x 1/2″H) PULLH61 .South Haven Antique 128mm C/C (5 3/8″L) KNOBH20 .88″W x 1.1″ C/C (5/16″W x 2″L x 7/16″H) Effective March 17.5 1/2″ C/C (11/16″W x 7 1/8″L) PULLH42 .96mm C/C (4 7/8″W x 2″L x 7/8″H) KNOBH32 .Nickel Antique Highlight (1 5/16″W x 3/4″H) PULLH55 .Black (1 1/8″W x 1 1/4″L x 1/2″H) LGWOODPULL* (1″W x 5 1/2″L) PULLH41 . • Screws included with each hardware piece.3″ C/C (4 1/4″W x 1 1/2″L x 5/8″H) KNOBH46 .Nickel Antique Highlight 96mm C/C (3/8″W x 4 3/4″L x 1 3/8″H) PULLH56 .Vibra Black Nickel .08″L) PULLH44 .03″L) PULLH63 .96mm C/C (1/2″W x 4 1/8″L x 1 1/6″H) PULLH36 .96mm C/C (1 1/8″W x 3 7/8″L x 1 1/8″H) SMWOODPULL* (1 1/16″W x 4 1/4″L) KNOBH40 .Black Nickel .Copper Antique Highlight (1 1/4″W x 1 1/8″L) PULLH52 .Oil Rubbed Bronze (1 1/4″W x 1″H) PULLH30 .Copper Antique Highlight 128mm C/C (15/16″W x 5 1/2″L x 1 1/16″H) KNOBH54 .Vibra Black Nickel .6″ C/C (3/4″W x 7 1/2″L x 1 1/4″H) PULLH64 .DECORATIVE PULLS AND KNOBS DESCRIPTION MODEL HARDWARE .7.Black . Not recommended for use with PureStyle™ and Thermofoil styles.2 1/2″ C/C (3″W x 1/2″L x 5/8″H) PULLH50 .Copper Antique Highlight (2 1/4″W x 1 1/16″L) PULLH53 . • See page 78 for 5-piece drawer front dimensions when specifying decorative hardware.Black .Satin Nickel .Vibra Black Nickel (1″W x 1 1/4″L x 7/8″H) PULLH47 .128mm C/C (1 1/4″W x 6 1/8″L x 1/3″H) KNOBH31 .38″W x 1 1/4″H) KNOBH65 .5″ C/C (5/16″W x 5″L x 1 1/4″H) PULLH51 .Red Rust Antique (1. PULLH45 .Rust Pewter (1.38″ C/C (3/8″W x 8 1/16″L x 7/8″H) KNOBH07 .Ultra Brush Nickel .Satin Nickel .128mm C/C (3/16″W x 6 1/2″L x 1 1/8″H) PULLH59 .Vibra Black Nickel .DECORATIVE PULLS AND KNOBS (cont’d) KNOBH06 .3″ C/C (1/2″W x 4 9/16″L x 15/16″H) KNOBH37 .9″ C/C (7/8″W x 9 1/4″L) PULLH39 .Oil Rubbed Bronze .128mm C/C (1 1/4″W x 5 1/8″L x 1 3/8″H) PULLH66 . and Oak and Hickory finishes on Oak.Vibra Black Nickel (2 1/8″W x 1 1/2″L x 5/8″H) WOODKNOB* (1 3/16″W x 1 1/2″L) • Larger pulls may not be compatible with raised profile or 5-piece drawer fronts on face frame openings of 9″ wide or less.Satin Nickel .Vibra Black Nickel .Black .Stainless Steel (0.Stainless Steel .Black (2 1/8″W x 2″L x 5/8″H) KNOBH35 .96mm C/C (5/8″W x 5″L x 1 7/16″H) PULLH08 .Black Nickel with Brown Glaze 4 1/2″ C/C (7/16″W x 5 1/8″L) PULLH11 .Black Nickel with Brown Glaze (1 1/4″W x 1 1/8″H) KNOBH10 .27″W x 1.96mm C/C (1 1/8″W x 4 1/4″L x 1 1/8″H) KNOBH43 .Windsor Antique (1. Available in Cherry and Maple finishes on Maple.South Haven Antique (1 1/4″) KNOBH23 .Stainless Steel .MODEL HARDWARE .28″L) KNOBH62 .088″) PULLH38 .Ultra Brush Nickel (1 1/4″W x 1″H) KNOBH58 .Ultra Brush Nickel (1″W x 3/4″H) PULLH60 .Rust Pewter (1/4″W x 1. 2014 405 ACCESSORIES & PARTS DESCRIPTION . *Specify finish. CS. and OCS cabinets 36″ and 42″ high WBMW. • Heat Shield is used to deflect heat from self-cleaning ovens away from cabinet doors and drawer fronts. • Cabinet door cannot be hinged on the same side as the angled heat shield. • Restricts hinges to 86 degree opening capability. 942HINGE 170° Hinge BSC. and Angled Corner Sink Bases (ACS) & Fronts (ACSF). • For use when additional 1/8″ can be added to the oven manufacturer’s recommended space requirement. SLS. • Sold in pairs. and RRC (except door revolving cabinets) STRTHEATSHIELD • White powder coated metal shields sold in pairs. 107° Hinge All cabinets not specified by other hinges Radius 38BFOVHINGE Integrated Soft Close. • Heat Shield is used to deflect heat from self-cleaning ovens away from cabinet doors and drawer fronts. full and partial overlay STRAIGHT HEAT SHIELDS 30” 32049HINGE 90° Corner Self-Closing Center Hinge Center Hinge for ER.SP.. Wall Transition Cabinets (WTC).. For use on full overlay styles: Base Transition Cabinets (BTC). Diagonal Wall (DW) and Base (DAB) Cabinets. 6-way Adjustable. BLS. and MCC. 2014 . Effective March 17. Full-overlay. and MC cabinets 3 121/32” /8” Radius E71MINIHINGE Drawer Front Fold-Down Hinge 26mm Cup Diameter 3DB. Installs on the front of the face frame of each cabinet adjacent to the oven. • Not recommended for cabinets with roll trays specified in partial overlay styles. 38CFOHINGE Integrated Soft Close. Face-mount 107° Hinge OCD. SLS. 107° Hinge All cabinets not specified by other hinges. not compatible with double door cabinets. HINGE ANGLE RESTRICTION CLIP HINGERESCLIP • For use in applications with cabinets installed at varying depths to prevent the door damage caused by opening into an adjacent cabinet. Stacked Wall Transition Cabinets (STWTC). BBC. cabinets • All hinges sold in pairs. OMC.. BER. TMLC. • Works only with the 38NPOHINGE and 38CFOHINGE. 1/2″ Partial-overlay. 6-way Adjustable. • White powder coated metal shields sold in pairs. 4-way Adjustable. BER.. and RRC cabinets (except revolving door cabinets) 7299HINGE Mirror Hinge TV. • For use when additional 1/8″ cannot be added to the oven manufacturer’s recommended space requirement. • Installs on the side of the face frame of each cabinet adjacent to the oven. Full-overlay.DESCRIPTION MODEL DESCRIPTION ANGLED HEAT SHIELDS ANGLHEATSHIELD HINGES 7/8” 5 /8 7 /8 30” ACCESSORIES & PARTS 406 5/8” 3/8” MODEL 38NPOHINGE Integrated Soft Close. CS. ER. BLS. LID ORGANIZERS LO24DPRT30 LO24DPRT33 OVEN INSTALLATION KIT OCINSTALLKIT • Recommended for supporting built-in appliances such as 4” ovens. LO24DPRT33. 25) 251/2” PPP30 Effective March 17. 14 1 / 2 ” CLIPS & SCREWS 11” PPP30 BRKOFFSCREW (pkg. • Standard on 21″ high Wall Top Hinge cabinets. 2014 ACCESSORIES & PARTS Drawer Box Only . MODEL Door for Any Cabinet 18″ High or Less Door for Any Cabinet 21″ to 30″ High Door for Any Cabinet 33″ or Higher No Hinge Route Doors 18″ High or Less No Hinge Route Doors 21″ to 30″ High No Hinge Route Doors 33″ or Higher LIDSTAY . 18″ high Wall Top Hinge cabinets. • 29 15/16″ x 19 1/2″ LCHAMPERLNR • Replacement cloth liner for use with LCRH188421. POTS & PANS PULL-OUT PPP • For use in 24″ wide cabinets. DRAWERS Complete Drawer 407 • Complete Drawer and Drawer Box Only do not include drawer guides. 15″.HEAVY DUTY Any Drawer Front LIDSTAYHD • One heavy duty lid stay hinge required per cabinet.DESCRIPTION MODEL DESCRIPTION LIDSTAY LIDSTAY DOORS & DRAWER FRONTS • Sold in pairs. 221/4” PPP 2” 21” Shelf Depth (front to back) 113/4” 193/4” MC16HDW/WCATCH MDDISC4 (pkg. They must be ordered separately. 25) 9 1 /2 ” INSTALLSCR24 (pkg. 4) • RETCLIP259BAG: 6 retainer clips and a variety of rubber feet for use with glass inserts in mullion and cut for glass doors. PEGGED DISH ORGANIZER PDO (8 Posts & Board) PDOPOSTS (4 Posts) LINEN CLOSET HAMPER LINER • For use in 36″ wide base cabinets. Refer to appliance manufacturer specifications for installation 3” requirements. 1413/16” 221/4” 179/16” 1113/16” 21” Shelf Depth (front to back) 177/8” 313/16” INSTALLATION HARDWARE PARTS BUMPERPADS (pkg. 100) TVHDW/WCATCH T232MDCLIPS RETCLIP259BAG • For use in 30″ wide cabinets. and warming drawers. • Standard on 12″. LO24DPRT36 LO 235/8” • LO24DPRT30. see page 353. microwaves. 24) INSTALLSCREWS (pkg. and LO24DPRT36 include roll tray and installation hardware. • Pegged Board is 3/8″ thick. • Cord is 8 ft. • Tablet Holder has an overall height of 1 17/32″ when installed and in closed position (measured from the bottom panel of the cabinet). • Specify finish name and wood type when ordering. Size Application Effective March 17.78″ visible from front of cabinet when closed. • Tray has side cut-outs for a charging cord and can be used to store most tablets when closed. • Epoxy coated White wire. • When installed.DESCRIPTION MODEL DESCRIPTION MODEL POWER POD JPWRPODBK (Black) SPICE RACK PULL DOWN SPD18 Cap JPWRPODSS (Stainless Steel) • Spice Rack Pull Down dimensions: 8 15/16″ high x 14 13/16″ wide x 10 5/16″ deep. • Safe for countertop installation: rated IP54-splash proof from splashing water and water jets per IPX waterproof specifications. NEW TABLET HOLDER TABLETHLDR 133/8” 103/8” 81/2” 111/4” SLIDING TOWEL RACK STR • Metal. • This item requires field installation. TOT15 TOT18 SR18 B SHLFPD36 • Kit includes 2 white trays and tilt out hinges. height. Also included in roll tray hardware kit. 13 3/8” ACCESSORIES & PARTS 408 PREMIUM DOOR MECHANISM NEW SHELF PULL DOWN • Shelf Pull Down dimensions: 18 11/64″ high x 28 1/4″ wide x 8 1/2″ deep. • Fits in any sink cabinet. • Maximum Weight Capacity: 26 lbs. • Must be installed on the floor of the cabinet. • SB30T. • Caddy dimensions are: 9 15/16″ wide x 18 5/16″ tall x 18 5/8″ deep. SB48 A = Hole Centers Width B = Outside Overall Widths • Designed for Base cabinets only. • Clearance dimensions: 19 3/8″ high x 15 3/8″ wide. SB39. Handle is pulled up to bring bottom of power strip to countertop. A B Fits SR12 7 1/2″ 7 7/8″ B15 SR15 10 1/2″ 10 7/8″ B18 Model SR18 13 1/2″ 13 7/8″ B21 TOT15 11″w x 2″d x 3 3/4″h SB30. Mounts to door top and bottom rails. 2014 . • Tray is movable forward and backward with a slight side to side rotation. ASTM. SHELF PEGS STAIN SHELFPEGS (pkg. SB27. ROLL TRAY PLUG IN BRACKET RTBKSXSP • For use with roll tray hardware to prevent interference with door hinges. SB33 TOT18 14 1/4″w x 2″d x 3 3/4″h SB36. ANSI. • Recommended for use in cabinets 18″ and wider. and SB36ST feature one wide front with 2 trays attached. SBCADDY • Caddy is removable and portable. • Refer to page 20 for a listing of standard and premium finishes. 24) STAINSTANDARD STAINPREMIUM • Shelf pegs are 3mm steel pins with clear plastic shoulders. 0. SPICE RACKS SR12 TILT OUT TRAYS SR15 A 3” Deep 191/2” 4” Model • Mounts under 12″ wide cabinet or wider. and can be utilized at any position. This accessory cannot be installed above drawers. Cannot be installed on an adjustable shelf. 10 amps. three electrical sockets. • Dishwasher safe. • Maximum Weight Capacity: 15 lbs. CSA. • 18″ of clearance required below surface mount location. depending on overall thickness. and is ETL approved-compliant for electrical and other safety standards to North America safety including: UL. • Designed for cabinets 12″ deep or deeper. Maximum tablet weight is 3 1/2 lbs. long and features a standard 3-prong plug for use in any household outlet. • Features an acrylic mounting base and pull-down tablet holder tray. • Creates a smooth and silent self-closing motion. and 3 9/16″ diameter hole is required in countertop to install. SB33ST. • Installation instructions included. and NFPA standards. SB42. width. PDM • Includes all installation hardware. • Maximum dimensions for tablet: 11 1/4″ x 8 1/2″ x 1 1/8″ thick. • 5″ wide x 17 3/4″ long x 1 1/2″ high. SB24. and two USB ports (located above power switch). • Caddy fits in cabinets with a minimum: 12″ wide x 20 1/2″ high frame opening x 21″ deep cabinet. • Sold in quarts. • Must be installed on the floor of the cabinet. Cannot be installed on an adjustable shelf. top lip of strip sits on top of countertop with a pivoting handle. and weight of the tablet. SINK BASE CADDY • Wiping stains can be sprayed at low pressure. JPWRPODGM (Gun Metal Black) • Includes: independent power switch. • Tray divider is chrome wire. 45/16” 195/8” 103/4” or 133/4” CTDK 409 • CTDK: Includes 1 divider. • Specify finish name and wood type when ordering. • MTUK not available in Black. WSK39 WSK42 WINE GLASS HOLDERS 1011/16” 1011/16” WGH30 (7 slots) WGH33 (7 slots) 281/4” or 311/4” WGH36 (8 slots) 341/4” • • • • Maximum wine glass base is 3 1/4″ diameter. 109/16” 10” WSK30 WSK33 WSK36 21/2” 21” TDRO15 25/16” Opening Width 18” Diameter For 39” or 42” High Cabinet UTILITY EASY ACCESS BASKETS 103/4” or 133/4” 39/16” 41/4” UEASBSK15 UEASBSK18 • Only for use to add baskets to a UEAS cabinet. 2VSD363421.DESCRIPTION MODEL DESCRIPTION MODEL TOUCH-UP KITS TUK VANITY CHROME ROLL-OUT RACK VCRR1521 MTUK • Touch-Up Kit includes touch up marker and a fill stick. CPU152921 (rack will be exposed−no door). VU188421. LC188421 (lower section). and 3 screws. • VCRR1521 recommended for use in VB153221. 33”. Designed for installation under a wall cabinet (between end panels and behind face frame). VU188421H. • Roll-out is full extension. DDD152921. VB153421. 10” WALL SUSAN KITS WSK30 WSK33 WSK36 WSK39 21” TDRO12 18” Diameter For 30”. TRAY DIVIDER KIT VCRR1821 • Requires installation to fixed shelf or cabinet bottom in a 21″ or 24″ deep cabinet. • Utilizes Smart Stop undermount guides and bumpers for door protection. • Mounting hardware not included. DDD182921. 3 clips. • TDRO15: 3 removable dividers (4 compartments). VSD303421. 193/4” TDRO12 TRAY DIVIDER ROLL-OUT KIT TDRO15 79/16” • TDRO12: 2 removable dividers (3 compartments). or 36” High Cabinet 21/2” 23/32” Opening Width WSK42 • 30″-36″ kits include pole and two 18″ diameter plywood shelves. Wine Glass Holder is finished. Effective March 17. VSD303121. VANITY WASTEBASKET KIT VWB • Bottom mount zinc colored Smart Stop guide with 20 quart grey wastebasket inserted in chrome support. VCCB183421. VCC483421FP. • Installation hardware included. • MTUK ordered in opaques with glaze will only contain the base color. May be trimmed to fit smaller cabinets. • Mini Touch-Up Kit includes small touch up marker and a small fill stick. VCC423421FP. 39″ and 42″ kits include pole and three 18″ diameter plywood shelves. • VCRR1821 recommended for use in VB183421. 2014 ACCESSORIES & PARTS 121/4” . 2VSD363221. Overall size is 15″W x 24 1/2″H. If ordered in Arch/Cathedral. 2014 . SAMPLE FRAME & DOORS DOORSAMPLEW DOORSAMPLEB SALES SUPPORT TOOLS 410 • Specify door style and finish.DESCRIPTION SALES SUPPORT TOOLS MODEL HARDWARE BOARD SLCHDWBD • 15″ x 22″. All doors are Square. the door will be Arch/Cathedral. Effective March 17. • DOORSAMPLEW features a wall door on a face frame. • DOORSAMPLEB will have a base door and drawer front on the face frame. • See door style finish chart on pages 22-24 for availability. Overall size is 15″W x 22″H. only one finish can be specified. • Not recommended for use when taking application to the ceiling. To order with more than one finish. Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. STKMLD1 Finish Nails* • Includes: 2 TBP8 1 SWCRM8 1 ICM8 1 TF396FH Assembly Instructions *Cleats and finish nails not included. • When ordered as a kit. moulding pieces must be ordered separately. field assembly is required. TBP8 Finish Nails* 3 Cleat* Finish Nails* Finish Nails* 2 Cleat* SWCRM8 ICM8 61/8" TF396FH 1 Cleat* 411 Finish Nails* Finish Technique/Rustic Alder Availability TBP8 Distressing Finish Nails* TBP8 SWCRM8 ICM8 TF396FH 1" Top of Cabinet Door Face Frame ✓ Heirlooming ✓ ✓ ✓ Rustic Alder ✓ ✓ STKMLD2 MOULDING STACK 2 • Includes: 1 SWVCRM8 2 VFR8 1 TF396FH Assembly Instructions *Cleats and finish nails not included.DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. 1" VFR8 TBP8 Finish Nails* Top of Cabinet Face Frame Door Finish Technique/Rustic Alder Availability SWVCRM8 LB2 VFR8 TBP8 Distressing ✓ Heirlooming ✓ Rustic Alder ✓ ✓ ✓ ✓ Effective March 17. SWVCRM8 3 Cleat* Finish Nails* VFR8 Cleat* 77/16" 2 TF396FH 1/16" Space Finish Nails* 1 Cleat* VFR8 Finish Technique/Rustic Alder Availability Door SWVCRM8 VFR8 TF396FH 1/2" 3/4" Top of Cabinet Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ Face Frame (3/4" Thick) STKMLD3 MOULDING STACK 3 SWVCRM8 3 Cleat* Cleat* 1/16" Space 63/16" Finish Nails* LB2 2 Finish Nails* 1 Cleat* • Includes: 1 SWVCRM8 1 LB2 1 VFR8 1 TBP8 Assembly Instructions *Cleats and finish nails not included. 2014 STACK MOULDING KITS MOULDING STACK 1 • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets . • Not recommended for use when taking application to the ceiling. SWVCRM8 Finish Nails* 412 Cleat* Finish Nails* 3 Finish Nails* Finish Nails* 7/16" TF396FH Finish Nails* DE8 713/16" TF396FH 2 Cleat* RPM8 Finish Nails* 1 Cleat* TF396FH 1" Finish Nails* DE8 Finish Technique/Rustic Alder Availability Finish Nails* STACK MOULDING KITS Top of Cabinet SWVCRM8 RPM8 DE8 TF396FH Door Face Frame Distressing ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ STKMLD6 MOULDING STACK 6 • Includes: 1 SHKRCRM8 2 SM8 1 TF396FH Assembly Instructions *Cleats and finish nails not included. only one finish can be specified.DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. • Not recommended for use when taking application to the ceiling. • Not recommended for use when taking application to the ceiling. field assembly is required. • Not recommended for use when taking application to the ceiling. • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets STKMLD5 MOULDING STACK 5 • Includes: 1 SWVCRM8 1 RPM8 2 DE8 3 TF396FH Assembly Instructions *Cleats and finish nails not included. 2014 . SHKRCRM8 Finish Nails* Finish Nails* TF396FH SM8 5" Finish Nails* Finish Nails* Cleat* Top of Cabinet SM8 3/4" Door Finish Technique/Rustic Alder Availability Face Frame SHKRCRM8 SM8 TF396FH Distressing ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ ✓ STKMLD7 MOULDING STACK 7 • Includes: 1 SWVCRM8 1 ACAM 1 TF396FH 1 TSTM Assembly Instructions *Cleats and finish nails not included. Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. SWVCRM8 Finish Nails* TF396FH Finish Nails* ACAM 65/16" Finish Nails* Cleat* TSTM Finish Nails* Top of Cabinet Face Frame 11/4" Door Finish Technique/Rustic Alder Availability SWVCRM8 ACAM TF396FH TSTM Distressing ✓ ✓ Heirlooming ✓ Rustic Alder ✓ ✓ Effective March 17. moulding pieces must be ordered separately. • When ordered as a kit. To order with more than one finish. • Not recommended for use when taking application to the ceiling.DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. STKMLD8 1/2" Cleat* • Includes: 1 SWCRM8 2 RPM8 2 TBP8 1 TF396FH Assembly Instructions *Cleats and finish nails not included. moulding pieces must be ordered separately. To order with more than one finish. SWCRM8 35/8" SCM8 Finish Nails* 3/4" Top of Cabinet Distressing ✓ STKMLD10 Finish Nails* Cleat* Cleat* 413 Door Finish Technique/Rustic Alder Availability Face Frame VV96 SWCRM8 SCM8 LB2 Distressing ✓ ✓ ✓ Heirlooming ✓ ✓ ✓ Rustic Alder ✓ ✓ ✓ ✓ STKMLD11 MOULDING STACK 11 • Includes: 1 SWVCRM8 1 TF696FH 1 TCM8 Assembly Instructions *Cleats and finish nails not included. field assembly is required. SWVCRM8 Finish Nails* 91/16" TF696FH 2 Finish Nails* Cleat* Cleat* Finish Technique/Rustic Alder Availability 1 TCM8 Finish Nails* Top of Cabinet 11/16" Door SWVCRM8 TF696FH TCM8 Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ Face Frame Effective March 17. 2014 STACK MOULDING KITS MOULDING STACK 8 • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets . Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. SWCRM8 3 Finish Nails* Finish Nails* TBP8 Finish Nails* RPM8 61/8" Cleat* 2 TF396FH 1 Cleat* Finish Nails* RPM8 Finish Nails* Finish Technique/Rustic Alder Availability TBP8 Finish Nails* SWCRM8 RPM8 TBP8 TF396FH 11/8" Top of Cabinet Door Face Frame MOULDING STACK 10 VV96 3/8" Finish Nails* 2 Finish Nails* Finish Nails* Finish Nails* 1 LB2 Heirlooming ✓ ✓ ✓ Rustic Alder ✓ ✓ • Includes: 1 VV96 1 SWCRM8 1 SCM8 1 LB2 Assembly Instructions *Cleats and finish nails not included. only one finish can be specified. • When ordered as a kit. only one finish can be specified. 2014 . • When ordered as a kit.DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. To order with more than one finish. • Not recommended for use when taking application to the ceiling. 53/8" Finish Nails* Cleat* CAPM 3/4" Top of Cabinet Door Finish Technique/Rustic Alder Availability Face Frame STACK MOULDING KITS SHKRCRM8 GREEKM TF396FH CAPM Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ STKMLD13 MOULDING STACK 13 LB2 Cleat* Finish Nails* • Includes: 3 LB2 Assembly Instructions *Cleats and finish nails not included. field assembly is required. GREEKM 45/16" TF396FH Finish Nails* Cleat* VFR8 Finish Nails* Top of Cabinet Face Frame Door Finish Technique/Rustic Alder Availability SCM8 GREEKM TF396FH VFR8 Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ Effective March 17. Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets STKMLD12 MOULDING STACK 12 Finish Nails* SHKRCRM8 Finish Nails* 414 TF396FH GREEKM 7/32" • Includes: 1 SHKRCRM8 1 GREEKM 1 TF396FH 1 CAPM Assembly Instructions *Cleats and finish nails not included. 25/16" Finish Nails* LB2 LB2 Finish Nails* 17/16" Top of Cabinet Door Finish Technique/Rustic Alder Availability Distressing Face Frame Heirlooming Rustic Alder LB2 STKMLD14 MOULDING STACK 14 LB2 Finish Nails* Cleat* Finish Nails* LB2 • Includes: 2 LB2 1 TF396FH Assembly Instructions *Cleats and finish nails not included. moulding pieces must be ordered separately. 33/32" TF396FH Finish Nails* Top of Cabinet 11/4" Door Finish Technique/Rustic Alder Availability Distressing Face Frame LB2 TF396FH Heirlooming ✓ Rustic Alder ✓ STKMLD15 MOULDING STACK 15 SCM8 Finish Nails* Finish Nails* • Includes: 1 SCM8 1 GREEKM 1 TF396FH 1 VFR8 Assembly Instructions *Cleats and finish nails not included. DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. only one finish can be specified. Finish Nails* Cleat* TF396FH 2 Finish Nails* Finish Nails* VFR8 1 Cleat* 41/16" Top of Cabinet 3/8" Finish Technique/Rustic Alder Availability Door Face Frame SCM8 TF396FH VFR8 Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ STKMLD19 MOULDING STACK 19 Face Frame • Includes: 1 DE8 1 TCM8 Assembly Instructions *Cleats and finish nails not included. 311/16" BRAIDM TSTM Finish Nails* Top of Cabinet 11/4" Door Finish Technique/Rustic Alder Availability Face Frame SWCRM8 LB2 BRAIDM TSTM Distressing ✓ Heirlooming ✓ Rustic Alder ✓ STKMLD18 MOULDING STACK 18 SCM8 • Includes: 1 SCM8 1 TF396FH 1 VFR8 Assembly Instructions *Cleats and finish nails not included. • Not recommended for use when taking application to the ceiling. To order with more than one finish. • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets STKMLD16 MOULDING STACK 16 SWVCRM8 Finish Nails* LB2 • Includes: 1 SWVCRM8 1 DE8 1 LB2 Assembly Instructions *Cleats and finish nails not included. Door Finish Nails* Bottom of Cabinet Finish Nails* Finish Nails* Cleat* DE8 TCM8 19/16" Finish Technique/Rustic Alder Availability 11/4" Distressing DE8 TCM8 Heirlooming Rustic Alder ✓ Effective March 17. field assembly is required. • Not available in Hickory. 2014 STACK MOULDING KITS SWVCRM8 DE8 LB2 . moulding pieces must be ordered separately. • When ordered as a kit. 35/16" DE8 Finish Nails* Finish Nails* Top of Cabinet 1/2" Door Face Frame 415 Finish Technique/Rustic Alder Availability Distressing ✓ Heirlooming ✓ Rustic Alder ✓ ✓ STKMLD17 MOULDING STACK 17 SWCRM8 LB2 Finish Nails* Cleat* Finish Nails* • Includes: 1 SWCRM8 1 LB2 1 BRAIDM 1 TSTM Assembly Instructions *Cleats and finish nails not included. Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. field assembly is required. • Not recommended for use when taking application to the ceiling. • When ordered as a kit. SWCRM8 Finish Nails* Finish Nails* 416 VV96 41/2" Finish Nails* Cleat* Finish Technique/Rustic Alder Availability SWCRM8 VV96 Top of Cabinet Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ Door STACK MOULDING KITS Face Frame STKMLD21 MOULDING STACK 21 SWLCRM8 • Includes: 1 SWLCRM8 1 TF396FH 1 VFR8 Assembly Instructions *Cleats and finish nails not included. • Not recommended for use when taking application to the ceiling. 2014 . Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets STKMLD20 MOULDING STACK 20 Ceiling • Includes: 1 SWCRM8 1 VV96 Assembly Instructions *Cleats and finish nails not included. moulding pieces must be ordered separately. SWVCRM8 SBE8 Finish Nails* 711/16" SFM8 Finish Nails* SFM8 CLEAT Top of Cabinet Finish Technique/Rustic Alder Availability SWVCRM8 SBE8 SFM8 Finish Nails* 11/4" Distressing ✓ Heirlooming ✓ ✓ ✓ Rustic Alder ✓ ✓ Door Face Frame Effective March 17. only one finish can be specified. Finish Nails* Cleat* TF396FH 2 Cleat* 47/16" Finish Nails* VFR8 1 Finish Nails* Finish Nails* Top of Cabinet 11/4" Door Finish Technique/Rustic Alder Availability Face Frame SWLCRM8 TF396FH VFR8 Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ STKMLD22 MOULDING STACK 22 Finish Nails* • Includes: 1 SWVCRM8 1 SBE8 1 SFM8 Assembly Instructions *Cleats and finish nails not included. To order with more than one finish.DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. • When ordered as a kit. field assembly is required. Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. 2014 . SMCOVECROWN8 Finish Nails* 6” TF396FH cut to 23/4” Cleat* Finish Nails* TBP8 Finish Technique/Rustic Alder Availability Door SMCOVECROWN8 TF396FH TBP8 Finish Nails* Top of Cabinet Distressing ✓ ✓ Heirlooming ✓ ✓ Rustic Alder ✓ ✓ Face Frame MOULDING STACK 25 STKMLD25 Finish Nails* • Includes: 3 TF396FH Assembly Instructions *Cleats and finish nails not included. To order with more than one finish. • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets STKMLD23 MOULDING STACK 23 • Includes: 1 COTCROWN8 1 LB2 1 SBE8 Assembly Instructions *Cleats and finish nails not included.DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. TF396FH Finish Nails* TF396FH Cleats* 41/2” Finish Nails* TF396FH TF396FH Finish Nails* Top of Cabinet Finish Technique/Rustic Alder Availability Distressing ✓ Heirlooming Rustic Alder ✓ Door Face Frame Effective March 17. COTCROWN8 427/32” Finish Nails* Cleat* SBE8 Finish Nails* Finish Technique/Rustic Alder Availability Finish Nails* Top of Cabinet 417 Door Distressing ✓ COTCROWN8 LB2 SBE8 Face Frame Heirlooming ✓ Rustic Alder ✓ ✓ STACK MOULDING KITS LB2 STKMLD24 MOULDING STACK 24 Finish Nails* Cleat* • Includes: 1 SMCOVECROWN8 1 TF396FH 1 TBP8 Assembly Instructions *Cleats and finish nails not included. only one finish can be specified. moulding pieces must be ordered separately. field assembly is required. INSCROWN8 418 w/insert of choice Finish Nails* Cleat* 6” TF396FH Finish Nails* TSTM Finish Technique/Rustic Alder Availability Door INSCROWN8 TF396FH TSTM Distressing Finish Nails* Top of Cabinet ✓ Heirlooming ✓ Rustic Alder ✓ STACK MOULDING KITS Face Frame STKMLD27 MOULDING STACK 27 • Includes: 1 INSCROWN8 1 INSERTCELT 1 SFM8 Assembly Instructions *Cleats and finish nails not included. • When ordered as a kit. INSCROWN8 INSERTCELT 6” Finish Nails* SFM8 Finish Nails* Finish Technique/Rustic Alder Availability Distressing Top of Cabinet INSCROWN8 INSERTCELT SFM8 Door Heirlooming ✓ ✓ ✓ Rustic Alder ✓ Face Frame STKMLD28 MOULDING STACK 28 Finish Nails* • Includes: 1 FOLCROWN8 1 BBM8 Assembly Instructions *Cleats and finish nails not included.DESCRIPTION STACK MOULDING KITS MODEL • Moulding stacks do not ship assembled. Assembly instructions can be viewed in 20/20 spec pages and will also ship with moulding kits. FOLCROWN8 61/4” BBM8 Finish Nails* Finish Nails* Top of Cabinet Finish Technique/Rustic Alder Availability Distressing Door FOLCROWN8 BBM8 ✓ Heirlooming ✓ ✓ Rustic Alder ✓ Face Frame Effective March 17. • Not recommended for use when taking application to the ceiling. 2014 . only one finish can be specified. • How to place a stack moulding in 20/20: → Moulding → Top Mouldings or Bottom Mouldings → Stacked Mouldings → Drag and drop desired moulding stack onto wall cabinets STKMLD26 MOULDING STACK 26 • Includes: 1 INSCROWN8 1 TF396FH 1 TSTM Assembly Instructions *Cleats and finish nails not included. To order with more than one finish. moulding pieces must be ordered separately. this finish is quite different from other cabinetry finishes you may be familiar with. The finish will be sanded through the base coat to expose the surface of the wood. Oasis.HEIRLOOM FINISH AGREEMENT Dear Diamond Customer. Portobello. the glaze will be applied after sanding has been done. Sand Dune. Juniper Berry. Sand-Through Finishes include: Hairline Cracking Visible textures of natural grain patterns Variation in rub through and wear techniques Accordingly. Our heirloom technique is available on the following finishes: Black. This type of sand through on the edges and profiles creates a naturally worn appearance. If a finish is chosen with a glaze. and we want you to fully understand the characteristics that make an Heirloom Finish unique. we ask that the following agreement be signed for Heirloom Finish orders. Customer Signature Dealer Signature Customer Name (please print) Dealer Name (please print) Dealer Purchase Order Number Effective March 17. Honeysuckle. As such. Because of its unique characteristics. This will enhance those areas of exposed wood to take on the darker characteristics of the applied glaze. Storm. I have read the foregoing and find the characteristic variations of wood with Heirloom finish are desirable. I agree not to hold Diamond and/or the Diamond dealer listed below responsible in the event that these characteristics are later found by me to be less desirable than I had expected. . and Tidal Mist. 2014 419 HEIRLOOM FINISH AGREEMENT Congratulations on your selection of Diamond cabinetry with an Heirloom finish. Your satisfaction is important to Diamond. Normal Characteristics of Painted. normal movement is typical due to changes in climatic conditions. On wood products. I have read the foregoing and find the characteristic variations of wood with painted finish are desirable. and we want you to fully understand the characteristics that make painted finishes so distinctive. Over time. 2014 . Because of its unique characteristics. there may be a slight color shift in the paint finish due to the continued exposure to natural and artificial light sources. or Inspired Collection painted finish.PAINT/OPAQUE FINISH AGREEMENT Dear Diamond Customer. Opaque with Glaze. It is important to realize that the beauty of wood cabinetry comes from the natural qualities of wood itself. Your satisfaction is important to Diamond. I agree not to hold Diamond and/or the Diamond dealer listed below responsible in the event that these characteristics are later found by me to be less desirable than I had expected. Customer Signature Dealer Signature Customer Name (please print) Dealer Name (please print) Dealer Purchase Order Number Effective March 17. The textures of those natural grain patterns often remain visible with paint finish and should be accepted as inherent characteristics when selecting painted cabinetry. the door’s center panel will be constructed of MDF material. Diamond utilizes only select solid hardwoods and hardwood veneers. we ask that the following agreement be signed for Paint Finish orders. As such. PAINT/OPAQUE FINISH AGREEMENT 420 Congratulations on your selection of Diamond cabinetry in an Opaque. this will cause hairline cracks at stile and rail and panel joints. This hairline cracking is a normal characteristic of painted finishes and will not be considered a reason for product replacement. Accordingly. The beauty of these genuine woods lies in the variation of the grain. this finish is quite different from other cabinetry finishes you may be familiar with. When ordering painted Maple 5-piece styles. We mention these characteristics because neither Diamond nor your Diamond dealer can be responsible for these conditions and variations. Your satisfaction is important to Diamond. As such. open and closed knots of various sizes and colors. Accordingly. Unsound Knot (moveable core) − Not to be expected. it will be uncommon to find all markings on any single piece. mineral streaks. Customer Signature Dealer Signature Customer Name (please print) Dealer Name (please print) Dealer Purchase Order Number Effective March 17. the wood will contain color difference caused by variations in minerals found in the soil. It is important to realize that the beauty of wood cabinetry comes from the natural qualities of wood itself. Also.RUSTIC ALDER DESCRIPTION AGREEMENT Dear Diamond Customer. Worm Tracks − Can be expected on Rustic Alder in sizes up to approximately 1/8″ wide by 8″ long. however. . creating visible mineral tracks. However. Larger holes will not be filled. In addition. Holes created by open knots pass completely through the door and are desirable for this rustic look. and grain variation. small cracks. I have read the foregoing and find the characteristic variations of wood with Rustic Alder are desirable. Rustic Alder as described is featured for doors. The natural characteristics of wood described above and variations in grain patterns and color are not considered reasons for product replacement. and selected mouldings. Knot Cluster (cluster of tight sound knots) − To be expected in Rustic Alder. All doors. Sound Closed Knot (not moveable) − Expected in Rustic Alder up to approximately 3″ diameter. We mention these characteristics because neither Diamond nor your Diamond dealer can be responsible for these conditions and variations. and selected mouldings will contain some combination of the common Rustic Alder markings. Note: 3/4″ diameter is about the size of a penny. Sound Knot with Cracks − Expect sound knots with open cracks up to approximately 1″ in length. Some knots may have small holes through the panel. Rustic Alder is characterized by its light brown and reddish undertones and may contain a variety of pin holes. I agree not to hold Diamond and/or the Diamond dealer listed below responsible in the event that these characteristics are later found by me to be less desirable than I had expected. the natural characteristics mentioned occur randomly in Rustic Alder. Worm Holes/Pin Holes (can go through door) − Can be expected on Rustic Alder up to approximately 1/4″ diameter. those characteristics that might compromise the structural integrity of the door will not be included. Open Knot (through door) − Expected in Rustic Alder with open area up to approximately 3/4″ diameter. drawer fronts. and we want you to fully understand the characteristics that make Rustic Alder so distinctive. Customers should expect a much lower occurrence of rustic characteristics in these other areas. Because of its unique characteristics Rustic Alder is quite different from other wood types you may be familiar with. Other areas of the product will utilize standard hard Alder. bird pecks. 2014 421 RUSTIC ALDER DESCRIPTION AGREEMENT Congratulations on your selection of Diamond cabinetry in Rustic Alder. drawer fronts. we ask that the following agreement be signed for Rustic Alder orders. NOTES .