DAYCO+Hose+&+Coupling+Catalogue.pdf

TM HoseE-Z MINER TM EZ-MINER & Couplings Distributed By: Dayco Products, Inc 1 Prestige Place P.O. Box 1004 Dayton, OH 45401-1004 Dayco Canada 75 Dyment Road P.O.Box 9000 Barrie, Ontario L4M 4V9 (937) 226-7000 (705) 726-1891 105494 © 2000 Dayco Products, Inc.  WARNING WARNING Dayco's product are part of an engineered system which must be assembled and used in accordance with Dayco instructions and limitations. Dayco's product are part of an engineered system which must be assembled and used in accordance with Dayco instructions and limitations. Dayco hose, couplings and crimping machines are designed as an effective and reliable assembly system and the use of other than Dayco's product may produce hose assemblies that will not meet rated performance. Failure to follow Dayco instructions and limitations could lead to premature hose failures resulting in property damage, serious injury or death. Dayco hose, couplings and crimping machines are designed as an effective and reliable assembly system and the use of other than Dayco's product may produce hose assemblies that will not meet rated performance. Failure to follow Dayco instructions and limitations could lead to premature hose failures resulting in property damage, serious injury or death. Dayco's limited warranty shall apply only if the customer uses hose, fittings, hose fitting components and crimp equipment specifically engineered, designed and produced to Dayco process specifications. Dayco's limited warranty shall apply only if the customer uses hose, fittings, hose fitting components and crimp equipment specifically engineered, designed and produced to Dayco process specifications. DAYCO DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY CRIMPED HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE DAYCO HOSE FITTINGS, HOSE AND EQUIPMENT, IN CONFORMANCE WITH DAYCO PROCESS SPECIFICATIONS FOR EACH SPECIFIC HOSE ASSEMBLY. DAYCO DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY CRIMPED HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE DAYCO HOSE FITTINGS, HOSE AND EQUIPMENT, IN CONFORMANCE WITH DAYCO PROCESS SPECIFICATIONS FOR EACH SPECIFIC HOSE ASSEMBLY. DO NOT USE A DAYCO CRIMPING MACHINE WITHOUT DIES! DO NOT USE A DAYCO CRIMPING MACHINE WITHOUT DIES! Table Of Contents GENERAL INFORMATION Thread Standards . . . . . . . . . . . . . . . . . . . . . 2-3 E-Z Miner Hose Hose Hose Hose Hose Style Style Style Style BXX NH . CE . U4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 .6 .7 .7 E-Z Miner Couplings (BW) Style Style Style Style Style Style Style Style Style Style Style Style Style Style Style Style Style Style Style Style Style E-Z Miner Couplings (HY) MP,MS . . . . . . . . . . . . . . . . . . . . . . . . . .10 MJ, RA, OM . . . . . . . . . . . . . . . . . . . . . .11 BP, BT, MZ (Light Series) . . . . . . . . . . . .12 MZ (Heavy Series), FJ . . . . . . . . . . . . . .13 FJ45T, FJ90T . . . . . . . . . . . . . . . . . . . . .14 FJ90TL, FN, OFT . . . . . . . . . . . . . . . . . .15 OF45T, OF90T . . . . . . . . . . . . . . . . . . . .16 OF90TL,OF90TM . . . . . . . . . . . . . . . . . .17 BPF, BPF45T,BPF90T . . . . . . . . . . . . . . .18 JPF, KMF, RO, RO45T . . . . . . . . . . . .19-20 RO45T (Heavy), RO90T (Light) . . . . . . . .21 RO90T (Heavy), PA, . . . . . . . . . . . . . . . .22 PA22, PA30 . . . . . . . . . . . . . . . . . . . . . .23 PA45, PA60 . . . . . . . . . . . . . . . . . . . . . .24 PA67, PA90 . . . . . . . . . . . . . . . . . . . . . .25 PA100,PA110, PA135 . . . . . . . . . . . . . . .26 PAK, PAK45, PAK90 . . . . . . . . . . . . . . . .27 PH, PH45 . . . . . . . . . . . . . . . . . . . . . . . .28 PH90, PHC, PHC22 . . . . . . . . . . . . . . . .29 PHC30, PHC45, PHC60 . . . . . . . . . . . . .30 PHC67, PHC90 . . . . . . . . . . . . . . . . . . . .31 E-Z Miner Couplings (NB) Style Style Style Style Style MP, MJ, FJ . . . . . . . . . . OFT, PH, PH45 . . . . . . . PH90, PHC . . . . . . . . . . PHC30, PHC45, PHC60 PHC67, PHC90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Style SN2K. . . . . . . . . . . . . . . . . . . . . . . . 8 Hose Style N310 . . . . . . . . . . . . . . . . . . . . . . . . 9 Hose Style BH . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . . . Style PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Style PA90, RO, RO45T, RO90T . . . . . . . . . . .37 E-Z Miner Couplings (BL) Style TAST,TA45T, TA90T . Style TMS, TM45T, TM90T Style FAT, FA45T, FA90T . . Style TFS, TF45T, TF90T . . Style RM, RM90T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 .39 .40 .41 .42 E-Z Miner Couplings (HR) Style FJ, MJ . . . . . . . . . . . . . . . . . . . . . . . . . .42 Style MP, PA, PA22, PA30 . . . . . . . . . . . . . . . .43 Style PA45, PA60, PA67, PA90 . . . . . . . . . . . .44 .32 .33 .34 .35 .36 Miscellaneous Products Flange Kits and Accessories . . . . . . . . . . . . . .4-5 Spring Guards . . . . . . . . . . . . . . . . . . . . . . . . .45 Hose Sleeving . . . . . . . . . . . . . . . . . . . . . . . 46 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-48 Miscellaneous Field Support Equipment Crimpers NP60 . . . WB60 . . EC30 . . . NP100A . EZ204A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 .50 .51 .52 .53 Tools And Accessories Cut Off Saws and Blades . . . . . . . . . . . . . .54-55 Skiving Tools and Bin Cabinet . . . . . . . . . . . . .56 1 Thread Standards SAE J514, 37˚ Flare THREAD O.D. TAPERED TAPERED THREAD O.D. THREAD I.D. 30˚ THREAD I.D. THREAD I.D. 30˚ 37˚ MALE NPTF (MP,SP) 37˚ MALE 37° (MJ) FEMALE NPTF (FF) FEMALE NPSM (FN) FEMALE 37° (FJ) American Dryseal Pipe Threads (NPTF and NPSM) Commonly referred to as 37˚ JIC, this connection is widely used in hydraulic systems. When the straight threads are engaged, the 37˚ male seat seals on the 37˚ female flare seat. Most thread sizes are identical to the 45˚ SAE connection as noted below. Care must be taken not to confuse these two connectors which have different seating angles. Dash Inch Size Size -2 1/8 -3 3/16 -4 1/4 -5 5/16 -6 3/8 -8 1/2 -10 5/8 -12 3/4 -14 7/8 -16 1 -20 1-1/4 -24 1-1/2 -32 2 Thread 5/16–24* 3/8–24* 7/16–20* 1/2–20* 9/16–18 3/4–16* 7/8–14* 1-1/6–12 1-3/16–12 1-5/16–12 1-5/8–12 1-7/8–12 2-1/2–12 Male Thread O.D. MM IN 7.9 .31 9.6 .38 11.2 .44 12.7 .50 14.2 .56 19.0 .75 22.3 .88 26.9 1.06 30.0 1.18 33.3 1.31 41.4 1.63 47.7 1.88 63.5 2.50 Female Thread I.D. MM IN 6.9 .27 8.6 .34 9.9 .39 11.4 .45 12.9 .51 17.0 .67 20.3 .80 24.9 .98 27.7 1.09 31.0 1.22 39.1 1.54 45.5 1.79 61.2 2.41 This commonly used connection incorporates two methods of sealing. The male NPTF (Dryseal) tapered thread will mate with the NPTF tapered female, which is usually a port, and seal when the special threads are crushed together. Additional sealing aids such as pipe dope and teflon tape are often used with these threads. If a male end has a 30˚ seat it will mate with a 30˚cone seat in the NPSM straight thread swivel female, usually found on adapters, and is mechanically held together by the threads. NPTF & NPSM threads are not interchangeable with British pipe threads. Dash Inch Male Thread O.D. Size Size Thread MM IN -2 1/8 1/8–27 10.3 .41 -4 1/4 1/4–18 13.7 .54 -6 3/8 3/8–18 17.3 .68 -8 1/2 1/2–14 21.3 .84 -12 3/4 3/4–14 26.9 1.06 -16 1 1–11-1/2 33.3 1.31 -20 1-1/4 1-1/4–11-1/2 42.2 1.66 -24 1-1/2 1-1/2–11-1/2 48.3 1.90 -32 2 2–11-1/2 60.4 2.38 Female Thread I.D. MM IN 9.4 .37 12.4 .49 15.7 .62 19.3 .76 24.9 .98 31.5 1.24 40.1 1.58 46.2 1.82 57.9 2.28 *Same thread as SAE 45˚flare SAE J514 Straight Thread O-Ring Boss O-RING SPOTFACE O-RING THREAD O.D. MALE O-RING (RA, RC) THREAD I.D. THREAD O.D. 2 Thread 5/16–24 3/8–24 7/16–20 1/2–20 9/16–18 3/4–16 7/8–14 1-1/6–12 1-3/16–12 1-5/16–12 1-5/8–12 1-7/8–12 2-1/2–12 THREAD I.D. FEMALE O-RING PORT (RD) This straight thread connection uses the same threads as the JIC 37˚ flare shown above. However, the 37˚ flare has been removed and an o-ring added. When mated with a female o-ring boss port the o-ring is trapped in a special tapered counterbore to effect the seal. Dash Inch Size Size -2 1/8 -3 3/16 -4 1/4 -5 5/16 -6 3/8 -8 1/2 -10 5/8 -12 3/4 -14 7/8 -16 1 -20 1-1/4 -24 1-1/2 -32 2 SEAT Male Thread O.D. MM IN 7.9 .31 9.6 .38 11.2 .44 12.7 .50 14.2 .56 19.0 .75 22.3 .88 26.9 1.06 30.0 1.18 33.3 1.31 41.4 1.63 47.7 1.88 63.5 2.50 Female Thread I.D. MM IN 6.9 .27 8.6 .34 9.9 .39 11.4 .45 12.9 .51 17.0 .67 20.3 .80 24.9 .98 27.7 1.09 31.0 1.22 39.1 1.54 45.5 1.79 61.2 2.41 MALE OFS (OM) FEMALE OFS (OFT, OF) Titan™ SAE J1453 O-Ring Face Seal This connection is designed for leak-free use to 6000 PSI. The oring in the face of the straight thread male end seals against the flat face female seat and is mechanically held in place by a swivel female nut. Dash Inch Size Size Thread -4 1/4 9/16–18 -6 3/8 11/16–16 -8 1/2 13/16–16 -10 5/8 1–14 -12 3/4 1-3/16–12 -16 1 1-7/16–12 -20 1-1/4 1-11/16–12 -24 1-1/2 2–12 Male Thread O.D. MM IN 14.2 .56 17.3 .68 20.6 .81 25.4 1.00 30.0 1.18 36.6 1.44 42.7 1.68 50.8 2.00 Female Thread I.D. MM IN 12.9 .51 16.0 .63 19.0 .75 23.6 .93 27.8 1.10 34.5 1.36 40.6 1.60 48.8 1.92 Thread Standards JIS 30˚ Flare with Parallel Pipe Threads (PF) DIN 7611-60˚ Series 24˚ CONE THREAD O.D. THREAD I.D. THREAD 24˚ O.D. 30˚ THREAD I.D. 30˚ MALE 30° FEMALE 30° (JPF) MALE (DX) This Japanese connector is similar to the American 37˚ JIC flare except for the 30˚ seat angle. The straight (parallel) pipe threads are the same as BSPP. Dash Inch Size Size -2 1/8 -4 1/4 -6 3/8 -8 1/2 -10 5/8 -12 3/4 -16 1 -20 1-1/4 -24 1-1/2 -32 2 Thread 1/8–28 1/4–19 3/8–19 1/2–14 5/8–14 3/4–14 1–11 1-1/4–11 1-1/2–11 2 Male Thread O.D. MM IN 9.4 .37 13.7 .53 17.2 .68 21.5 .84 23.1 .91 26.9 1.06 34.0 1.34 42.6 1.68 48.5 1.90 60.4 2.37 Female Thread I.D. MM IN 8.1 .32 12.4 .49 16.0 .62 19.8 .77 20.6 .81 25.4 1.00 31.8 1.25 40.4 1.59 46.2 1.81 58.2 2.29 Japanese Komatsu 30˚ Flare with Metric Threads FEMALE This German standard consists of a single male and female end with straight metric threads. The female has a 60˚ or a universal 24˚/60˚ cone which seats on the 60˚ seat in the male end. Thread M12 x 1.5 M14 X 1.5 M16 X 1.5 M18 X 1.5 M22 X 1.5 M26 X 1.5 M30 X 1.5 M38 X 1.5 M45 X 1.5 M52 X 1.5 Male Thread O.D. MM IN 12 .47 14 .55 16 .63 18 .71 22 .87 26 1.02 30 1.18 38 1.50 45 1.77 52 2.04 Female Thread I.D. MM IN 10.5 .41 12.5 .49 14.5 .57 16.5 .65 20.5 .81 24.5 .96 28.5 1.12 36.5 1.44 43.5 1.71 50.5 1.99 Tube O.D. MM IN 6 .24 8 .32 10 .39 12 .47 15 .59 18 .71 22 .87 28 1.10 35 1.38 42 1.65 DIN 7611-24˚ Series 24˚ CONE THREAD O.D. THREAD I.D. THREAD 24˚ O.D. 30˚ 30˚ MALE 30° FEMALE 30° (JPF) MALE (DX) Used extensively on Komatsu equipment, this 30˚ flare connector has parallel metric threads and is sometimes confused with JIS 30˚ flare which has parallel pipe threads. Dash Metric Size Size Equiv. -6 -8 -10 -12 -16 -20 -24 9 12 16 19 25 32 38 Metric Thread M18 M22 M24 M30 M33 M36 M42 X X X X X X X 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Male Thread O.D. MM IN 18 22 24 30 33 36 42 .71 .87 .94 1.18 1.30 1.42 1.65 Female Thread I.D. MM IN 16.5 20.5 22.5 28.5 31.5 34.5 40.5 THREAD I.D. .65 .82 .88 1.12 1.24 1.36 1.59 FEMALE This connector system consists of one male and three styles of female, all of which have straight metric threads. Sealing takes place between the 24˚ seat in the male end and the respective sealing areas in the female ends. DIN 2353 includes both a light and heavy duty series which can be identified by measuring the tube O.D. Thread M12 M14 M16 M18 M20 M22 M24 M26 M30 M36 M42 M45 M52 X X X X X X X X X X X X X 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 Male Thread O.D. MM IN Female Thread I.D. MM IN Tube O.D. "T" DIM Light Duty Heavy Duty MM IN MM IN 12 14 16 18 20 22 24 26 30 36 42 45 52 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 28 34 40 43 50 6 8 10 12 – 15 – 18 22 28 – 35 42 .47 .55 .63 .71 .78 .87 .94 1.02 1.18 1.41 1.65 1.77 2.04 .41 .49 .57 .65 .73 .81 .89 .96 1.11 1.34 1.57 1.70 1.97 .24 .32 .39 .47 – .59 – .71 .87 1.10 – 1.32 1.66 – 6 8 10 12 14 16 – 20 25 30 – 38 – .24 .32 .39 .47 .55 .63 – .78 .98 1.18 – 1.50 3 734 .984 .139 1.137 2.139 1.262 7/16 16PA-77 1. 1-1/4 1-5/8 1-7/8 PART NUMBER SFH-8H SFH-12H SFH-16H PART NUMBER HHB5-20 HHB6-24 HHB7-28 SIZE 5/16-18 X 1-1/4 3/8-16 X 1-1/2 3/8-16 X 1-3/4 PART NUMBER LW-5 LW-6 LW-7 20PH 24PH 32PH 1-1/4 1-1/2 2 2-1/8 2-1/2 3-1/8 SFH-20H SFH-24H SFH-32H HHB8-28 HHB10-36 HHB12-44 7/16-14 X 1-3/4 5/8-11 X 2-1/4 3/4-10 X 2-3/4 LW-8 LW-10 LW-12 Grade 5 Code 61 Grade 8 Code 62 O-RING FOR FLANGE HEAD (One Required) PART SIZE NUMBER I. 5/16 08PA-77 .139 1.137 2.762 2.D.012 3/8 12PA-77 .484 1.D.859 2.512 .296 .139 O-Ring sizes for Split Flanges Code 61 and Code 62 Flange Dash Size 8 12 16 20 24 32 40 O-Ring Size 210 214 219 222 225 228 — 1.D.139 .D.139 .139 1.762 2.234 .262 3/8 16PA-77 1. 5/16 08PA-77 .139 1. WALL O.139 .D.139 O-RING FOR FLANGE HEAD (One Required) PART SIZE NUMBER I.139 .984 .D.139 1.234 .859 2.296 .734 . WALL O.484 1.012 3/8 12PA-77 .574 7/16 1/2 1/2 LOCK WASHER (Four Required) FLANGE HALF KITS 08PH 12PH 16PH Bolt Identification 4 FLANGE CLAMP (Two Required) 20PA-77 24PA-77 32PA-77 1.512 O-Ring Part Number 08PA-77 12PA-77 16PA-77 20PA-77 24PA-77 32PA-77 — 1. 1-3/16 1-1/2 1-3/4 PART NUMBER SFH-8 SFH-12 SFH-16 PART NUMBER HHB5-20 HHB6-20 HHB6-20 SIZE 5/16-18 X 1-1/4 3/8-16 X 1-1/4 3/8-16 X 1-1/4 PART NUMBER LW-5 LW-6 LW-6 20PA 24PA 32PA 1-1/4 1-1/2 2 2 2-3/8 2-13/16 SFH-20 SFH-24 SFH-32 HHB7-24 HHB7-24 HHB8-24 7/16-14 X 1-1/2 1/2-13 X 1-1/2 1/2-13 X 1-1/2 LW-7 LW-8 LW-8 Style PH & PHC SAE J518 Code 62 Flange Kits FLANGE CLAMP (Two Required) HEX HEAD BOLT (Four Required) NOMINAL FLANGE SIZE 1/2 3/4 1 FLANGE O.574 1/2 5/8 3/4 20PA-77 24PA-77 32PA-77 1.Flange Kit & Accessories Style PA SAE J518 Standard Pressure Code 61 Flange Kits HEX HEAD BOLT (Four Required) LOCK WASHER (Four Required) FLANGE HALF KITS 08PA 12PA 16PA NOMINAL FLANGE SIZE 1/2 3/4 1 FLANGE O. 5 2.405 12.6 1.63 79.2 .9 .88 54.D.495 12.303 8.44 44.5 1. "A"±.69 – – 22.59 50.000 Flange Thickness "D" MM IN 6.38 71.57 .000 5.5 1.560 14.73 .010 MM IN 30.13 Bolt Spacing "C"±.063 30.4 .63 47.375 10.560 14.76 .34 38.63 79.010 MM IN 18.25 36.06 58.000 Flange Thickness "D" MM IN 7.000 6.25 36.8 2.010 MM IN 38. Working Pressure PSI 5.94 27.7 1.000 6.72 23.4 1.265 8. Working Pressure PSI 6.8 3.50 79.000 5. "A"±.560 SAE Code 62–High Pressure Series (Style PH) Dash Size -8 -12 -16 -20 -24 -32 -40 Inch Size 1/2 3/4 1 1-1/4 1-1/2 2 Bolt Size 5/16–18 X 1-1/4 3/8–16 X 1-1/2 7/16–14 X 1-3/4 1/2–13 X 1-3/4 5/8–11 X 2-1/4 3/4–10 X 2-3/4 Flange O.19 35.7 1.010 MM IN 31.75 50.25 41.000 6.8 1.315 9.13 Bolt Spacing "C"±.57 .5 1.4 2.4 3.06 Flange Port "B"±.1 1.19 34.8 2.94 27.0 2.09 31.00 .7 2.13 96.000 5.4 2.315 8.6 1.3 .88 54.8 3.00 .2 .25 66.345 9.9 1.000 Flange Thickness "D" MM IN – – 14.000 6.4 3.000 6.010 MM IN 31.265 6.41 42.81 5 .000 6.2 .13 96.75 Code 62 Max.73 .560 14.3 1.2 1.2 .75 77.000 3.D.31 69.3 2.63 47.0 2.010 MM IN 17.7 1.7 1.81 Bolt Spacing "C"±.52 .010 MM IN 18.6 1.8 2.75 Code 62 Max.44 44.00 60.010 MM IN 40.00 57.2 1.4 3.2 .8 2. Working Pressure PSI 6.7 2.4 3.13 63.6 1.25 66.3 1.73 .265 6.7 2.000 6.1 2.25 41.50 79.13 63.5 1.315 8.560 14.000 6.8 1.1 1.000 6.9 .000 6.52 .88 52.50 44.28 .1 2.59 50.74 .00 57.5 2.50 – – 47.69 Code 61 Max.000 3.8 1.375 Flange Port "B"±.5 .72 23.4 Bolt Flange Dimensions THREADED HOLES (4 PLACES) B C D A SAE Code 61–Standard Series (Style PA) Dash Size -8 -10 -12 -16 -20 -24 -32 Inch Size 1/2 5/8 3/4 1 1-1/4 1-1/2 2 Bolt Size 5/16–18 X 1-1/4 METRIC 3/8–16 X 1-1/4 3/8–16 X 1-1/4 7/16–25 X 1-1/2 1/2–13 X 1-1/2 1/2–13 X 1-3/4 Flange O.D.0 1.8 3. "A"±.81 SAE Code 62–High Pressure Series (Style PHC) Cat Flanges Dash Size -8 -12 -16 -20 -24 -32 Inch Size 1/2 3/4 1 1-1/4 1-1/2 2 Bolt Size 5/16–18 X 1-1/4 3/8–16 X 1-1/2 7/16–14 X 1-3/4 1/2–13 X 1-3/4 5/8–11 X 2-1/4 3/4–10 X 2-3/4 Flange O.3 .6 1.2 1.010 MM IN 40.495 Flange Port "B"±.09 31.00 .88 26.000 4. Size DN 20 25 32 40 50 **6 SPIRAL CONSTRUCTION.10 3.00 118 4.1 63.38 0.00 420 16.10 4.E-Z Flex® SAE 100R2AT Tube: Seamless Synthetic Rubber.42 2.05 2.50 1.79 2.2 37.3 71.70 5.46 0.13 2.29 2.74 0.87 1.21 Cplg. oil resistant Reinforcement: Two high tensile wire braids Cover: Oil.75 150 6.65 1.51 1.42 7.00 Weight Kg/m Lb/ft 0.50 88 3.0 635 25.27 0.97 0. and flame resistant Temperature Range: -40˚C to +100˚C -40˚F to +212˚F Application: Used on high pressure mobile mining equipment where a tough hose with a fatigue life superior to SAE 100R2 Hose is MSHA approved.D.0 Weight Kg/m Lb/ft 1.5 304 12.46 0.3 Inch 0.76 Cplg. Size DN 6 10 12 16 20 25 32 40 50 O. Part Number NH12 NH16 NH20** NH24** NH32** Nom.98 2.50 100 4.39 2.2 45.4 29. BW BW BW BW BW BW BW BW BW Style NH SAE 100R13 Tube: Seamless Synthetic Rubber.0 18. Bend Radius MM Inch 50 2.8 22. oil resistant Reinforcement: Multiple layers of high tensile wire Cover: Oil.40 0. MM 32. Burst Pressure Bar PSI 1380 20000 1380 20000 1380 20000 1380 20000 1380 20000 Min. BW BW NB NB NB .26 1.00 630 25.87 2.E-Z Miner TM Hose Style BXX .69 0. Part Number BXX04 BXX06 BXX08 BXX10 BXX12 BXX16 BXX20 BXX24 BXX32 Nom.00 1.0 38.49 1.52 0.80 Working Pressure Bar PSI 345 5000 345 5000 345 5000 345 5000 345 5000 Min. weather.50 500 20.8 47.59 0.49 Working Pressure Bar PSI 345 5000 276 4000 241 3500 189 2750 155 2250 138 2000 112 1625 86 1250 78 1125 Min.77 0. and flame resistant Temperature Range: -40˚C to +120˚C -40˚F to +212˚F Application: Used on high pressure mobile mining equipment.06 1.15 1.6 54. Burst Pressure Bar PSI 1380 20000 1104 16000 966 14000 759 11000 621 9000 552 8000 448 6500 345 5000 310 4500 Min.11 1. Bend Radius MM Inch 241 9.60 3.58 1.5 508 20.57 0.5 57.1 25.1 Inch 1. 6 Inch 3/4 1 1-1/4 1-1/2 2 O. Inch 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 MM 15. weather.56 1.00 63 2.26 2. Hose is MSHA approved.0 419 16.D. 22 2.3 62 3. oil resistant Textile reinforcement with helix wire Oil. Burst Pressure Bar PSI 82.8 Inch 0. Bend Radius MM Inch 127 5.5 12.50 0.4 150 6.0 Weight Kg/m Lb/ft 0.0 178.39 3. Excellent flexibility.89 1.0 356.80 0.8 1200 69.67 0. Size DN 20 25 32 40 50 65 75 Inch 3/4 1 1-1/4 1-1/2 2 2-1/2 3 O.0 254.7 300 17.73 2.06 2. weather.E-Z Flex® Spiral SAE 100R12 Tube: Seamless Synthetic Rubber. and flame resistant Temperature Range: -40˚C to +120˚C -40˚F to +250˚F Application: Used on high pressure mobile mining equipment.2 800 41.5 304 12.2 7.7 45.48 1. oil resistant Reinforcement: Four spiraled layers of high tensile wire Cover: Oil.9 * Consult Dayco Customer Service Inch 1. Vacuum 25 inches Hg.1 46.E-Z Miner TM Hose Style CE .98 2. Bend Radius MM Inch 76. Burst Pressure Bar PSI 1104 16000 1104 16000 1104 16000 1104 16000 828 12000 690 10000 690 10000 Min.1 52.87 1.9 56 Min.0 Weight Kg/m Lb/ft 0.51 Cplg.61 Working Pressure Bar PSI 20.82 Cplg.11 2.3 37.0 241 9.7 38.33 0.2 91.8 200 10. HY HY HY HR HR HR* HR* 7 .45 0. Hose is MSHA approved Part Number CET06 CET08 CE12 CE16 CE20 CE24 CE32 Nom.4 14.D.5 508 20.30 2.3 250 13.5 225 Min.9 53.3 23.4 3.74 0.61 1.2 63.9 30.8 4.21 1.11 3.00 4.0 178 7.63 Working Pressure Bar PSI 276 4000 276 4000 276 4000 276 4000 207 3000 172 2500 172 2500 Min. SAE/USCG Marine Listed Part Number U412 U416 U420 U424 U432 U440 U448 Nom.0 635 25.0 305.05 2.3 250 15.D.6 66.0 419 16.0 127.81 1.07 1. MM 20.20 2.0 1000 55.85 2.75 2. weather.95 0. Size DN 10 12 20 25 32 40 50 Inch 3/8 1/2 3/4 1 1-1/4 1-1/2 2 O.64 1.3 5.50 1. BW BW BW BW BW BW BW Style U4 SAE 100R4 Tube: Reinforcement: Cover: Seamless Synthetic Rubber.77 2.50 1.4 600 27.23 1.3 79.74 0.9 100 4.50 3.6 400 17.5 10.29 0. resistant synthetic rubber–MSHA approved Temperature Range: -40˚F to +250˚F Application: Used for suction or return line on hydraulic systems. MM 31.94 1.94 1.0 101.06 3. oil.7 1300 80.0 178.8 19200 1104.56 .8 54. resistant Neoprene MSHA approved Temperature Range: -40˚C to +120˚C -40˚F to +212˚F Application: Used for high pressure hydraulic lines on mining equipment Part Number SN2K04 SN2K06 SN2K08 SN2K10 SN2K12 SN2K16 SN2K20 SN2K24 SN2K32 8 Nom.68 3.1 25.59 .2 5800 331.68 .9 Inch .9 47.55 0.1 3625 220.87 1.2 4800 276.24 Cplg.2 7.2 66.E-Z Miner TM Hose Style SN2K – Abrasion King® DIN 20022-2SN Tube: Reinforcement: Cover: Neoprene Two braids of high tensile wire Abrasion.0 16000 1000.13 2.27 0.10 1.0 244.8 7200 358.0 420.45 .0 203.0 1160 Min. Burst Pressure Bar PSI 1600.74 . MM 15.15 1.00 1.0 127.63 Working Pressure Bar PSI 400.81 .2 4640 Min. BW BW BW BW BW BW BW BW BW .3 37.0 18.4 9600 496.5 14500 883.6 2400 124.5 522.D.8 4.1 20.8 22.8 23200 1324.49 1.8 5200 320.5 636. Bend Radius MM Inch 101.65 1.46 0.8 3200 165.5 9.40 .5 12.96 . Size DN 06 10 12 16 20 25 32 40 50 Inch 1/4 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2 2 O.6 305.0 4000 250.38 0. and water.2 1800 89.2 16.49 1.7 8.4 29.3 5.2 12800 662.88 2.42 2.7 25 Weight Kg/m Lb/ft 0.98 2.32 2. E-Z Miner TM Hose Style N310 DIN 20023 Tube: Neoprene Reinforcement: Four spiraled layers of high tensile steel wire Cover: Oil.27 0. Part Number BH06 BH08 BH10 BH12 Nom. Bend Radius MM Inch 242.5 Weight Kg/m Lb/ft 1. ozone and heat resistant EPDM Temperature Range: -22˚F to +257˚F Application: Specifically designed for use in R12 and R134a refrigerant systems only.13 Working Pressure Bar PSI 24.8 1750 Min.32 0.75 . Bend Radius MM Inch 101.7 4.4 28.2 350 24.5 6.47 . Size DN 8 10 12 16 Inch 5/16 13/32 1/2 5/8 O.0 24000 Min.2 25. BW Style BH .0 2000 138.5 165.D. weather.0 2000 138. Size DN 16 O.Barrier Refrigerant Hose Exceeds SAE J51 – Meets SAE J2064 Tube: Neoprene/Nylon barrier/Nitrile barrier construction Reinforcement: Textile reinforcement Cover: Black. Inch 5/8 MM 28.14 .2 350 Min.0 5.8 4.19 0. resistant synthetic rubber–MSHA approved Temperature Range: -40˚F to +212˚F Application: A superior spiral hose for use in severe high pressure hydraulic applications Part Number N310 Nom.55 . Burst Pressure Bar PSI 138.91 1.12 Working Pressure Bar PSI 414.0 119.5 Weight Kg/m Lb/ft 0. Burst Pressure Bar PSI 1656.2 350 24.77 Cplg. MM 19.2 350 24.D.1 23.40 .00 1.28 .0 2000 120.5 Inch 1.0 6000 Min.37 Cplg. abrasion.0 9.8 Inch .7 140. BH BH BH BH 9 . 2 48.2 26.92 .41 1.D.06 .7 33.44 1.05 1.36 1.79 1. DN Inch 6 6 6 10 10 12 12 12 16 16 20 20 20 25 25 32 32 40 50 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 2 Thread Size Tube Drop MM Inch 1/8-27 1/4-18 3/8-18 3/8-18 1/2-14 3/8-18 1/2-14 3/4-14 1/2-14 3/4-14 3/4-14 1/2-14 1 11-1/2 1 11-1/2 1-1/4 11-1/2 1-1/4 11-1/2 1-1/2 11-1/2 1-1/2 11-1/2 2-11-1/2 (A) Cut-Off MM Inch 20.68 1.98 2.70 1.D.8 1.8 43.38 1. MM Inch (C) Thickness MM Inch .8 26.8 36.99 1.43 1.9 25.5 50.41 1.03 1.37 1.5 26.3 34.59 1.6 35.59 1.5 35.2 31.D.2 45.8 35. MM Inch (C) Thickness MM Inch Flange O.E-Z Miner TM Couplings BW Series Style MP Male NPTF Part Number BW04-02MP BW04-04MP BW04-06MP BW06-06MP BW06-08MP BW08-06MP BW08-08MP BW08-12MP BW10-08MP BW10-12MP BW12-12MP BW12-08MP BW12-16MP BW16-16MP BW16-20MP BW20-20MP BW20-24MP BW24-24MP BW32-32MP Hose I.4 40.7 43.82 1.0 40.4 36.1 Flange O.24 1.31 1.4 42.70 1.3 54.D.13 Style MS Male Swivel NPTF With 30° Cone Seat Part Number BW04-04MS BW06-06MS BW08-08MS BW12-12MS BW16-16MS 10 Hose I. DN Inch 6 10 12 20 25 1/4 3/8 1/2 3/4 1 Thread Size 1/4-18 3/8-18 1/2-14 3/4-14 1 11-1/2 Tube Drop MM Inch (A) Cut-Off MM Inch 34. 44 1.3 31.11 2.15 1.1 39.31 1.8 .4 42.2 47.7 25.1 29.01 1.24 1.67 1.4 26.70 1.2 Flange O. MM Inch (C) Thickness MM Inch 1. DN Inch 6 6 6 10 12 12 16 20 20 20 25 25 32 32 40 50 1/4 1/4 1/4 3/8 1/2 1/2 5/8 3/4 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 2 Thread Size Tube Drop MM Inch 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/8-14 7/8-14 1-1/16 12 1-3/16 12 1-5/16 12 1-5/16 12 1-5/8 12 1-5/8 12 1-7/8 12 1-7/8 12 2-1/2 12 (A) Cut-Off MM Inch 25.3 53.6 38.55 1.92 .5 33.01 1.92 1.5 31.D.3 31. DN Inch 6 10 12 20 25 32 1/4 3/8 1/2 3/4 1 1-1/4 Thread Size 9/16-18 11/16-16 13/16-12 1-3/16 12 1-7/16 12 1-11/16 12 Tube Drop MM Inch (A) Cut-Off MM Inch 23.01 1. MM Inch (C) Thickness MM Inch Flange O.3 34.25 Style OM Male O-Ring Face Seal Part Number BW04-04OM BW06-06OM BW08-08OM BW12-12OM BW16-16OM BW20-20OM Hose I.8 22.86 2.37 Style RA Male O-Ring Boss Part Number BW04-04RA BW06-06RA BW08-08RA BW12-12RA BW16-16RA BW16-20RA BW20-20RA Hose I.7 31.7 25.06 1.23 1.1 25.24 1. DN Inch 6 10 12 20 25 25 32 1/4 3/8 1/2 3/4 1 1 1-1/4 Thread Size Tube Drop MM Inch 7/16-20 9/16-18 3/4-16 1-1/16 12 1-5/16 12 1-5/8 12 1-5/8 12 (A) Cut-Off MM Inch 19.D.3 36.55 1.23 1.D.D.02 .9 33.95 1.78 . MM Inch (C) Thickness MM Inch Flange O.6 60.D.41 11 .5 43.1 35.50 1.4 23.34 1.2 31.8 .87 1.9 24.E-Z Miner TM Couplings BW Series Style MJ Male 37° Flare Part Number BW04-04MJ BW04-05MJ BW04-06MJ BW06-06MJ BW08-08MJ BW08-10MJ BW10-10MJ BW12-12MJ BW12-14MJ BW12-16MJ BW16-16MJ BW16-20MJ BW20-20MJ BW20-24MJ BW24-24MJ BW32-32MJ Hose I.D.31 1.4 39. 04 1.96 1.4 29.83 .9 25.99 1.5 M26 X 1. DN Inch 6 6 6 10 10 12 16 20 25 1/4 1/4 1/4 3/8 3/8 1/2 5/8 3/4 1 Thread Size Tube Drop MM Inch 1/8-28 1/4-19 3/8-19 3/8-19 1/2-14 1/2-14 3/4-14 3/4-14 1-11 (A) Cut-Off MM Inch 21.90 .40 1.43 1.2 30.5 M22 X 1. MM Inch (C) Thickness MM Inch .15 1.D.90 .9 29.5 M18 X 1.5 M22 X 1.4 25.83 .11 1.0 36.24 1.16 1.4 35.2 31. MM Inch (C) Thickness MM Inch Flange O.E-Z Miner TM Couplings BW Series Style BP BSPP Rigid Male Part Number BW04-04BP BW04-06BP BW04-08BP BW06-06BP BW06-08BP BW08-06BP BW08-08BP BW10-12BP BW12-12BP BW16-16BP Hose I.5 M30 X 2 M36 X 2 Tube Drop MM Inch (A) Cut-Off MM Inch 21.52 Style BT BSPT Rigid Male Part Number BW04-02BT BW04-04BT BW04-06BT BW06-06BT BW06-08BT BW08-08BT BW10-12BT BW12-12BT BW16-16BT Hose I. MM Inch (C) Thickness MM Inch Flange O. DN Inch 6 6 6 10 10 12 12 16 20 25 1/4 1/4 1/4 3/8 3/8 1/2 1/2 5/8 3/4 1 Thread Size Tube Drop MM Inch 1/4-19 3/8-19 1/2-14 3/8-19 1/2-14 3/8-19 1/2-14 3/4-14 3/4-14 1-11 (A) Cut-Off MM Inch 24.40 1.3 33.5 28.06 .25 .2 31.8 .84 1.5 M16 X 1.11 1.9 22.6 38.5 M16 X 1.5 36.2 31.87 .2 26.4 26.D.23 1.4 35.2 31.43 1.D.1 21.03 1.30 1.2 .02 1.6 Flange O.1 22.D.9 24.98 1.6 40.0 26.1 22.D. DN Inch 6 6 6 10 10 10 12 16 20 25 1/4 1/4 1/4 3/8 3/8 3/8 1/2 5/8 3/4 1 Thread Size M12 X 1.9 28.D.5 M14 X 1.58 Style MZ Male Din-Light Series 24° Seat Part Number BW04-06MZ12A BW04-08MZ14A BW04-10MZ16A BW06-10MZ16A BW06-12MZ18A BW06-15MZ22A BW08-15MZ22A BW10-18MZ26A BW12-22MZ30B BW16-28MZ36B 12 Hose I.19 1.22 1. 65 1.2 39.0 33.9 40.71 1.22 1.17 2.12 1.55 1.5 31. DN Inch 6 6 10 10 10 10 12 16 20 25 32 1/4 1/4 3/8 3/8 3/8 3/8 1/2 5/8 3/4 1 1-1/4 Thread Size Tube Drop MM Inch M16 X 1.6 1.36 1.25 1.8 48.5 29.16 1.04 1.9 28.7 41.84 . DN Inch 6 6 6 10 10 12 12 12 16 16 20 20 20 20 25 25 25 32 32 32 40 50 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 3/4 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 2 Thread Size 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16 12 7/8-14 1-1/16 12 7/8-14 1-1/16 12 1-3/16 12 1-5/16 12 1-1/16 12 1-5/16 12 1-5/8 12 1-5/16 12 1-5/8 12 1-7/8 12 1-7/8 12 2-1/2 12 Tube Drop MM Inch (A) Cut-Off MM Inch 26.4 55.4 21.D.9 37.91 . MM Inch (C) Thickness MM Inch .0 37.0 28.5 31.4 40.62 1.91 .5 M30 X 2 M36 X 2 M42 X 2 M52 X 2 (A) Cut-Off MM Inch 23.77 Style FJ Swivel Female SAE 37° Flare Part Number BW04-04FJ BW04-05FJ BW04-06FJ BW06-06FJ BW06-08FJ BW08-08FJ BW08-10FJ BW08-12FJ BW10-10FJ BW10-12FJ BW12-10FJ BW12-12FJ BW12-14FJ BW12-16FJ BW16-12FJ BW16-16FJ BW16-20FJ BW20-16FJ BW20-20FJ BW20-24FJ BW24-24FJ BW32-32FJ Hose I.0 Flange O.89 2. MM Inch (C) Thickness MM Inch Flange O.4 40.30 1.5 M16 X 1.4 43.70 13 .55 1.E-Z Miner TM Couplings BW Series Style MZ Male Din-Heavy Series 24° Seat Part Number BW04-08MZ16A BW04-10MZ18A BW06-08MZ16A BW06-10MZ18A BW06-12MZ20A BW06-14MZ22A BW08-16MZ24A BW10-20MZ30B BW12-25MZ36B BW16-30MZ42B BW20-38MZ52B Hose I.1 21.09 1.7 31.94 1.4 41.80 1.D.8 45.47 1.84 .59 1.10 1.22 1.0 34.0 53.47 1.5 M22 X 1.D.9 25.4 23.5 M20 X 1.1 23.5 M18 X 1.59 1.4 27.58 1.6 39.10 2.4 45.02 1.4 39.5 M18 X 1.5 M24 X 1.D.56 1.2 68. 80 3.5 43.90 4.0 45.57 2.2 71.99 4.6 22.4 9.49 1.0 37.94 3.2 9.8 79.23 2.D.4 77.90 3.57 2.14 3.8 48.12 3.63 1.05 3.0 27.91 Style FJ90T 90° Bent Tube Swivel Female SAE 37° Flare Part Number BW04-04FJ90T BW04-05FJ90T BW04-06FJ90T BW06-06FJ90T BW08-08FJ90T BW08-10FJ90T BW08-12FJ90T BW10-10FJ90T BW10-12FJ90T BW12-12FJ90T BW12-16FJ90T BW16-16FJ90T BW16-20FJ90T BW20-20FJ90T BW20-24FJ90T BW24-24FJ90T BW32-32FJ90T 14 Hose I.23 1.5 49.6 71.14 2.8 51.39 .4 69.3 74.77 .3 150.2 16.3 56.9 14.4 43.23 1.2 71.24 3.96 2.9 37.1 101.8 54.52 4.7 41.80 2.89 1.94 5.03 2.3 65.9 .5 99.33 .24 3.8 54.2 142.05 3.14 2.92 2.3 19.9 9.89 5.63 1.71 1.9 40.4 74.1 99.4 79.13 3.01 1.80 2.3 80.0 29.2 45.6 79.7 31.08 0.D.3 31.2 82.4 100.D.6 21.5 77.1 46.39 .E-Z Miner TM Couplings BW Series Style FJ45T 45° Bent Tube Swivel Female SAE 37° Flare Part Number BW04-04FJ45T BW04-05FJ45T BW04-06FJ45T BW06-06FJ45T BW08-08FJ45T BW08-10FJ45T BW08-12FJ45T BW10-10FJ45T BW10-12FJ45T BW12-10FJ45T BW12-12FJ45T BW12-16FJ45T BW16-16FJ45T BW16-20FJ45T BW20-20FJ45T BW20-24FJ45T BW24-24FJ45T BW32-32FJ45T Hose I.06 3.71 1.15 3.00 Flange O.9 40.73 2.49 2.82 1. DN Inch 6 6 6 10 12 12 12 16 16 25 20 20 25 25 32 32 40 50 1/4 1/4 1/4 3/8 1/2 1/2 1/2 5/8 5/8 1 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 2 Thread Size 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/8-14 1-1/16 12 7/8-14 1-1/16 12 1-5/8 12 1-1/16 12 1-5/16 12 1-5/16 12 1-5/8 12 1-5/8 12 1-7/8 12 1-7/8 12 2-1/2 12 (B) Tube Drop MM Inch 8.63 1.36 .2 31.0 16.8 68.3 65.5 16.60 (A) Cut-Off MM Inch 37.9 27.3 32. MM Inch (C) Thickness MM Inch .D.4 114.58 1.80 1.3 46.4 63.1 105.4 51.15 .2 Flange O.27 1. DN Inch 6 6 6 10 12 12 12 16 16 20 20 25 25 32 32 40 50 1/4 1/4 1/4 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 2 Thread Size 7/16-20 1/2-20 9/16-16 9/16-16 3/4-16 7/8-14 1-1/16 12 7/8-14 1-1/16 12 1-1/16 12 1-5/16 12 1-5/16 12 1-5/8 12 1-5/8 12 1-7/8 12 1-7/8 12 2-1/2 12 (B) Tube Drop MM Inch 17.0 29.4 .15 1.90 1.22 3.81 2.55 .71 (A) Cut-Off MM Inch 39.84 2.3 33.9 124.4 82.14 5.56 1. MM Inch (C) Thickness MM Inch 1.47 2.68 .30 1.85 .7 77.1 1.09 1.2 127.63 1.49 1.61 1. 8 55.8 39.5 39.9 39.5 28.57 3.D.14 1.5 30.20 1.9 42.4 32.3 94.08 1.54 1.8 (A) Cut-Off MM Inch 1. MM Inch (C) Thickness MM Inch Flange O.13 1.78 1.1 41. MM Inch (C) Thickness MM Inch 1.78 1.2 45.18 2.8 65.0 36.78 1.79 15 .D. DN Inch 6 6 10 10 12 12 16 16 20 20 20 25 25 32 1/4 1/4 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1 1 1-1/4 Thread Size 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-14 1-3/16 12 1-14 1-3/16 12 1-7/16 12 1-7/16 12 1-11/16 12 1-11/16 12 Tube Drop MM Inch (A) Cut-Off MM Inch 27.42 1.43 2.1 45.2 1.25 1.7 29.58 Style OFT Swivel Female O-Ring Face Seal Part Number BW04-04OFT BW04-06OFT BW06-06OFT BW06-08OFT BW08-08OFT BW08-10OFT BW10-10OFT BW10-12OFT BW12-10OFT BW12-12OFT BW12-16OFT BW16-16OFT BW16-20OFT BW20-20OFT Hose I.55 1.2 45.87 2.2 45.67 1.73 37.D.0 31.73 Style FN Swivel Female NPSM 30° Cone Seat Part Number BW04-04FN BW06-06FN BW08-08FN BW12-12FN BW16-16FN Hose I. MM Inch (C) Thickness MM Inch Flange O.D.49 1. DN Inch 6 10 12 12 20 1/4 3/8 1/2 1/2 3/4 Thread Size 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16 12 (B) Tube Drop MM Inch 47.E-Z Miner TM Couplings BW Series Style FJ90TL 90° Bent Tube Swivel Female SAE 37° Flare (Long Drop) Part Number BW04-04FJ90TL BW06-06FJ90TL BW08-08FJ90TL BW08-10FJ90TL BW12-12FJ90TL Hose I.D.17 1. DN Inch 6 10 12 20 25 1/4 3/8 1/2 3/4 1 Thread Size Tube Drop MM Inch (A) Cut-Off MM Inch 1/4-18 3/8-18 1/2-14 3/4-14 1-11 1/2 29.20 1.7 30.1 37.D.63 1.4 45.4 40.4 Flange O.49 1.26 1.2 47.54 1.5 69.88 2.78 1.5 1.4 61. 27 1.43 .85 3.83 .88 2.4 10.4 76.8 56.30 2.59 .3 65.D.57 2.1 21.15 1.8 58.94 .2 29.2 Flange O.49 1.9 29.8 22.80 2.94 2.3 77.47 2.00 1.0 15.15 1.9 69.5 45.4 25.28 2.3 104.0 62.57 2.83 .82 .6 65.8 58.9 25.D.06 3.2 56. MM Inch (C) Thickness MM Inch 1.21 2.59 .3 50.07 (A) Cut-Off MM Inch 42.7 1.6 .9 39.71 4.02 Style OF90T Swivel Female O-Ring Face Seal 90° Bent Tube Part Number BW04-04OF90T BW04-06OF90T BW06-06OF90T BW06-08OF90T BW08-08OF90T BW08-10OF90T BW10-10OF90T BW10-12OF90T BW12-12OF90T BW12-16OF90T BW16-16OF90T BW20-20OF90T BW24-24OF90T 16 Hose I.15 1.9 10.21 2.9 23.00 1.41 .D.61 1.65 .2 .7 72.69 4.94 3.4 43.3 74.1 23.8 93.74 2.43 .E-Z Miner TM Couplings BW Series Style OF45T Swivel Female O-Ring Face Seal 45° Bent Tube Part Number BW04-04OF45T BW04-06OF45T BW06-06OF45T BW06-08OF45T BW08-08OF45T BW08-10OF45T BW10-10OF45T BW10-12OF45T BW12-12OF45T BW12-16OF45T BW16-16OF45T BW16-20OF45T BW20-20OF45T BW24-24OF45T Hose I.7 94.8 67.3 71.5 21.7 44. DN Inch 6 6 10 10 12 12 16 16 20 20 25 25 32 40 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1 1-1/4 1-1/2 Thread Size 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-14 1-3/16 12 1-3/26 12 1-7/16 12 1-7/16 12 1-11/16 12 1-11/16 12 2-12 (B) Tube Drop MM Inch 10.0 16.51 2.8 102.88 1.4 49.9 22.90 .68 1.12 Flange O. MM Inch (C) Thickness MM Inch .90 1.65 .4 27.8 47.5 62.2 63.83 2.71 1.5 16.2 32.5 39.9 40.66 2.70 (A) Cut-Off MM Inch 37. DN Inch 6 6 10 10 12 12 16 16 20 20 25 32 40 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1-1/4 1-1/2 Thread Size 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-14 1-3/16 12 1-3/16 12 1-7/16 12 1-7/16 12 1-11/16 12 2-12 (B) Tube Drop MM Inch 20.55 1.2 29.45 2.00 3.D.00 2.75 1.55 1.9 15.3 47.8 68.94 1. D.1 45.28 2.09 (A) Cut-Off MM Inch 37.78 3.57 2.9 23.1 63.80 2.61 1.E-Z Miner TM Couplings BW Series Style OF90TL Swivel Female O-Ring Face Seal 90° Elbow (Long Drop) Part Number BW04-04OF90TL BW04-06OF90TL BW06-06OF90TL BW06-08OF90TL BW08-08OF90TL BW08-10OF90TL BW12-12OF90TL BW16-16OF90TL BW20-20OF90TL Hose I.9 39.3 Flange O.3 Flange O.94 3.62 1.4 1.26 1.4 38.7 94.5 58.9 40.2 28. MM Inch (C) Thickness MM Inch 1.78 4.09 (A) Cut-Off MM Inch 37.51 2.51 1. DN Inch 6 6 10 10 12 12 20 25 32 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1 1-1/4 Thread Size 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-3/16 12 1-7/16 12 1-11/16 12 (B) Tube Drop MM Inch 45.80 2.46 2.80 2.47 2.8 62.2 96.3 74.9 41.4 129.49 1.9 40.53 .61 1.5 1.71 17 .13 2.D.8 62.80 1.3 74.8 45.94 1.0 70.1 54.57 2.8 65.9 39.50 5.49 1.80 1.D.54 1. DN Inch 6 6 10 10 12 12 20 25 32 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1 1-1/4 Thread Size 9/16-18 11/16-16 11/16-16 13/16 16 13/16 16 1-14 1-3/16 12 1-7/16 12 1-11/16 12 (B) Tube Drop MM Inch 32.54 1.71 Style OF90TM Swivel Female O-Ring Face Seal 90° Elbow (Medium Drop) Part Number BW04-04OF90TM BW04-06OF90TM BW06-06OF90TM BW06-08OF90TM BW08-08OF90TM BW08-10OF90TM BW12-12OF90TM BW16-16OF90TM BW20-20OF90TM Hose I.94 3.76 3.7 94.5 65.51 2.1 114.8 70.8 45.13 2.7 78. MM Inch (C) Thickness MM Inch 1.12 2.8 63.8 54.0 38.1 45.D. 16 3.38 2.6 120.5 76.87 2.25 1.0 30.2 49.1 114.3 23.1 44.0 108.9 61.7 127. DN Inch 6 10 12 20 25 32 40 50 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Thread Size 1/4-19 3/8-19 1/2-14 3/4-14 1-11 1-1/4 11 1-1/2 11 2-11 (B) Tube Drop MM Inch 20.0 59.D.45 1.0 104.39 1.D.67 (A) Cut-Off MM Inch 37.5 80.00 1.26 1.74 5.5 47.8 38.7 64.6 93.75 1.D.4 54.07 (A) Cut-Off MM Inch 52.1 25.3 42.E-Z Miner TM Couplings BW Series Style BPF BSPP Swivel Female Male 60° Cone Part Number BW04-04BPF BW06-06BPF BW08-08BPF BW10-12BPF BW12-12BPF BW16-16BPF BW20-20BPF BW24-24BPF BW32-32BPF Hose I.9 39.57 2.4 39.6 118.06 2.70 3.61 1.31 Style BPF90T BSPP 90° Bent Tube Swivel Female Part Number BW04-04BPF90T BW06-06BPF90T BW08-08BPF90T BW12-12BPF90T BW16-16BPF90T BW20-20BPF90T BW24-24BPF90T BW32-32BPF90T 18 Hose I.59 1.91 1.00 .21 1.D.3 68. DN Inch 6 10 12 16 20 25 32 40 50 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 Thread Size (B) Tube Drop MM Inch 1/4-19 3/8-19 1/2-14 3/4-14 3/4-14 1-11 1-1/4 11 1-1/2 11 2-11 (A) Cut-Off MM Inch 32.3 84.54 1.12 5.35 2. MM Inch (C) Thickness MM Inch 1.6 .5 135. MM Inch (C) Thickness MM Inch Flange O.66 4.99 4.4 31.3 Flange O.85 2.16 2.95 2.6 60.9 47.1 1.7 40.80 2.88 4.8 36.9 40.1 45.80 .42 3.31 4.53 Style BPF45T BSPP 45° Bent Tube Swivel Female Part Number BW04-04BPF45T BW06-06BPF45T BW08-08BPF45T BW12-12BPF45T BW16-16BPF45T BW20-20BPF45T BW24-24BPF45T BW32-32BPF45T Hose I.56 1.28 3.7 1.D.66 1.0 2.5 52.D. MM Inch (C) Thickness MM Inch Flange O.51 4.8 65.49 1. DN Inch 6 10 12 20 25 32 40 50 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Thread Size 1/4-19 3/8-19 1/2-14 3/4-14 1-11 1-1/4 11 1-1/2 11 2-11 (B) Tube Drop MM Inch 35.8 98.50 1. 76 1.5 M16 X 1.17 19 .5 (A) Cut-Off MM Inch 30.E-Z Miner TM Couplings BW Series Style JPF Swivel Female Japanese Industrial Standard 30° Flare – BSPP Threads Part Number BW04-04JPF BW06-06JPF BW08-08JPF BW12-12JPF BW16-16JPF Hose I.81 2.D.19 1.45 1.5 M14 X 1.2 30.5 Flange O.5 M18 X 1.1 35. DN Inch 6 6 6 10 10 10 12 16 20 20 25 32 1/4 1/4 1/4 3/8 3/8 3/8 1/2 5/8 3/4 3/4 1 1-1/4 Thread Size M12 X 1.22 1.81 Style KMF Swivel Female 30˚ Seat – Metric Thread – (Komatsu) Part Number BW04-14KMF BW06-18KMF BW08-22KMF BW08-24KMF BW12-30KMF BW16-33KMF BW20-36KMF BW24-42KMF Hose I.34 1.0 Flange O.0 38. MM Inch (C) Thickness MM Inch 1.D.0 33.44 1.1 34.46 Style RO Metric Swivel Female 24° Cone With O-Ring (Light Series) Part Number BW04-06RO12A BW04-08RO14A BW04-10RO16A BW06-10RO16A BW06-12RO18A BW06-15RO22A BW08-15RO22A BW10-18RO26A BW12-18RO26A BW12-22RO30B BW16-28RO36B BW20-35RO45B Hose I.5 M26 X 1.82 1.9 40.6 36.5 M22 X 1.5 M33 X 1.50 1.71 1. DN Inch 6 10 12 12 20 25 32 40 1/4 3/8 1/2 1/2 3/4 1 1-11/4 1-1/2 Thread Size Tube Drop MM Inch M14 X 1.33 1.8 34.5 M22 X 1.5 M30 X 1. MM Inch (C) Thickness MM Inch 1.5 M16 X 1.34 1.20 1.0 58.8 43.4 44. MM Inch (C) Thickness MM Inch 1.D.63 1.D.1 41.18 1.28 2.5 31.D.9 39.5 M18 X 1.0 55.73 2.D.61 1.5 36.5 M36 X 1.3 44. DN Inch 6 10 12 20 25 1/4 3/8 1/2 3/4 1 Thread Size Tube Drop MM Inch 1/4-19 3/8-19 1/2-14 3/4-14 1-11 (A) Cut-Off MM Inch 28.9 46.2 Flange O.5 M24 X 1.7 46.1 46.5 M26 X 1.13 1.38 1.1 36.54 1.5 M42 X 1.45 1.5 M22 X 1.0 62.5 M30 X 2 M36 X 2 M45 X 2 Tube Drop MM Inch (A) Cut-Off MM Inch 30. 2 28. DN Inch 6 6 10 10 10 12 12 16 20 20 25 32 32 1/4 1/4 3/8 3/8 3/8 1/2 1/2 5/8 3/4 3/4 1 1-1/4 1-1/4 Thread Size Tube Drop MM Inch M16 X 1.6 2.5 M20 X 1.5 M16 X 1.38 2.37 1.7 35.99 2.5 M18 X 1.8 35.5 M20 X 1.72 Flange O.99 1.1 35.3 50.6 94. MM Inch (C) Thickness MM Inch .3 42.33 1.7 28.5 M16 X 1.7 82.18 2.02 1.25 2.5 M22 X 1.0 72.0 50.5 M22 X 1.5 M24 X 1. DN Inch 6 6 10 10 12 16 20 20 25 32 1/4 1/4 3/8 3/8 1/2 5/8 3/4 3/4 1 1-1/4 Thread Size M14 X 1.9 60.38 1.1 Flange O.13 1.2 .1 25. MM Inch (C) Thickness MM Inch 1.26 2.8 33.8 51.16 2.4 55.13 1.66 (A) Cut-Off MM Inch 57.74 1.D.D.5 M16 X 1.5 M30 X 2 M30 X 2 M36 X 2 M42 X 2 M42 X 2 M52 X 2 (A) Cut-Off MM Inch 33.86 3.73 2.2 46.5 M18 X 1.5 M30 X 2 M36 X 2 M45 X 2 (B) Tube Drop MM Inch 25.5 M26 X 1.4 54.91 .9 23.D.8 32.2 57.5 76.97 Style RO45T 45° Bent Tube Metric Swivel Female 24° Cone With O-Ring (Light Series) Part Number BW04-08RO14A45T BW04-10RO16A45T BW06-10RO16A45T BW06-12RO18A45T BW08-15RO22A45T BW10-18RO26A45T BW12-18RO26A45T BW12-22RO30B45T BW16-28RO36B45T BW20-35RO45B45T 20 Hose I.94 .9 44.39 1.26 1.0 34.3 44.2 23.94 .49 1.33 1.99 .E-Z Miner TM Couplings BW Series Style RO Metric Swivel Female 24° Cone With O-Ring (Heavy Series) Part Number BW04-08RO16A BW04-10RO18A BW06-08RO16A BW06-12RO20A BW06-14RO22A BW08-12RO20A BW08-16RO24A BW10-20RO30B BW12-20RO30B BW12-25RO36B BW16-30RO42B BW20-30RO42B BW20-38RO52B Hose I.9 23.38 1.1 37.25 3.82 1.5 M26 X 1.D.00 2. MM Inch (C) Thickness MM Inch 2.4 35.9 22.5 M30 X 2 M30 X 2 M36 X 2 M42 X 2 M42 X 2 M52 X 2 (B) Tube Drop MM Inch 21.12 2.4 76.0 111.37 3.86 .94 .07 2.5 M26 X 1.1 78.10 1.4 22.15 2.5 M30 X 2 M36 X 2 M45 X 2 (B) Tube Drop MM Inch 41.7 108.2 40.9 41.54 1.38 Style RO90T 90° Bent Tube Metric Swivel Female 24° Cone With O-Ring (Light Series) Part Number BW04-08RO14A90T BW04-10RO16A90T BW06-10RO16A90T BW06-12RO18A90T BW08-15RO22A90T BW10-18RO26A90T BW12-18RO26A90T BW12-22RO30B90T BW16-28RO36B90T BW20-35RO45B90T Hose I.4 44.88 .63 1.4 67.61 1.6 55.1 30.94 3.5 55.7 99.14 2.5 M16 X 1.0 85.59 1.6 40.19 2.38 1.54 1.6 23.7 55.78 1.5 M24 X 1.4 38.1 35.5 101.9 54.95 1.86 2.5 M22 X 1.1 61.E-Z Miner TM Couplings BW Series Style RO45T 45° Bent Tube Swivel Metric Female 24° Cone With O-Ring (Heavy Series) Part Number BW04-08RO16A45T BW04-10RO18A45T BW06-08RO16A45T BW06-12RO20A45T BW06-14RO22A45T BW08-12RO20A45T BW08-16RO24A45T BW10-20RO30B45T BW12-20RO30B45T BW12-25RO36B45T BW16-30RO42B45T BW20-30RO42B45T BW20-38RO52B45T Hose I.5 M18 X 1.00 4.4 1 1-1/4 1-1/4 Thread Size M16 X 1. DN Inch 6 6 10 10 10 12 12 16 20 20 25 32 32 1/4 1/4 3/8 3/8 3/8 1/2 1/2 5/8 3/4 3.1 39.78 2.D.28 3.17 2.89 .4 54.9 24.64 3.1 45. MM Inch (C) Thickness MM Inch 1.1 45.5 M20 X 1.D.1 28.00 1.74 (A) Cut-Off MM Inch 53.5 1.2 54.48 1.7 74.8 93.5 M26 X 1.7 52.5 M18 X 1.2 .30 2.5 M16 X 1.68 (A) Cut-Off MM Inch 37.0 25. DN Inch 6 6 10 19 12 16 20 20 25 32 1/4 1/4 3/8 3/8 1/2 5/8 3/4 3/4 1 1-1/4 Thread Size M14 X 1.50 1.59 1.3 Flange O.52 2.4 40.0 58.D.38 1.D.2 45.01 4.5 M16 X 1.90 21 .25 4.9 39.77 2.19 1.1 Flange O.5 M20 X 1.2 72.7 83.20 2.9 64.5 M22 X 1.14 2.65 1.40 3.10 3. 05 30.D.71 2.75 2.5 50.1 38.E-Z Miner TM Couplings BW Series Style RO90T 90° Bent Tube Swivel Metric Female 24° Cone With O-Ring (Heavy Series) Part Number BW04-08RO16A90T BW04-10RO18A90T BW06-08RO16A90T BW06-12RO20A90T BW06-14RO22A90T BW08-12RO20A90T BW08-16RO24A90T BW10-20RO30B90T BW12-20RO30B90T BW12-25RO36B90T BW16-30RO42B90T BW20-30RO42B90T BW20-38RO52B90T Hose I.8 40.315 .2 59.73 6.7 59.73 8.2 38.2 74.265 .33 2.4 93.2 41.76 2.00 9.00 8.0 46.82 6.D.4 84.4 39.4 71.33 2.77 2.315 .2 78.50 1.5 44.75 2.54 2.4 71.1 1.5 M16 X 1.0 72.54 2.29 2.1 44.00 8.81 2. MM Inch (C) Thickness MM Inch Flange O.315 .265 .49 1.00 8.5 50.90 2.38 2.2 59.81 2.6 64.33 3.62 1.1 45.8 60.315 .00 8.4 86.4 38.81 3.2 30.2 59.28 3.315 .38 2.5 M20 X 1.375 .64 1.5 1.4 60.19 1.00 9.00 2.3 71.80 1.1 39.9 37. DN Inch 10 12 12 20 20 20 25 25 25 25 25 32 32 32 32 32 40 40 50 50 3/8 1/2 1/2 3/4 3/4 3/4 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 2 2 Thread Size Tube Drop MM Inch (A) Cut-Off MM Inch 47.84 1.315 .73 6.315 .38 2.5 70.7 41.375 .81 3.60 2.00 2.7 71.56 1.73 6.43 1. MM Inch (C) Thickness MM Inch 1.76 3.8 50.3 45.3 60.375 .00 8.6 60.50 1.2 70.47 1.4 83.315 .D.8 44.08 2.5 M24 X 1.265 .49 1.5 M22 X 1.28 3.85 1.2 94.5 M30 X 2 M30 X 2 M36 X 2 M42 X 2 M42 X 2 M52 X 2 (B) Tube Drop MM Inch 36.54 1.68 (A) Cut-Off MM Inch 37.9 37.94 1.D.2 60.7 165.1 39.19 1.3 59.91 2.37 2.7 49.315 .85 4.8 45.00 8.3 99.52 8.54 1.51 2.67 3.00 9.00 2.90 Style PA Flange SAE Code 61 C Part Number BW06-08PA BW08-08PA BW08-12PA BW12-12PA BW12-16PA BW12-20PA BW16-16PA BW16-16PAL BW16-20PA BW16-24PA BW16-32PA BW20-20PA BW20-20PAL BW20-24PA BW20-24PAL BW20-32PA BW24-24PA BW24-32PA BW32-32PA BW32-40PA 22 Hose I.00 1.0 1.81 2.31 6.0 83.315 .05 4.8 60.3 71.00 8.53 .1 Flange O.375 .50 1.78 2.5 M20 X 1.81 2.0 73.375 .52 8.315 .4 50.36 3.52 9.5 58. DN Inch 6 6 10 10 10 12 12 16 20 20 25 32 32 1/4 1/4 3/8 3/8 3/8 1/2 1/2 5/8 3/4 3/4 1 1-1/4 1-1/4 Thread Size M16 X 1.3 71.3 71.2 64.52 9.4 103.75 1.38 2.9 93.00 8.5 M18 X 1.265 .0 103.42 3.33 2.34 2. 9 110.265 .80 2.3 71.38 2.00 9.3 15.3 107.63 .73 8.75 1. MM Inch 30.3 60.60 .00 8.1 38.67 .81 (C) Thickness MM Inch 6.315 .38 2.00 9.265 .75 1.83 2.3 60.9 71.4 1.8 68.D.75 2.73 6.0 16.3 19.0 80.73 8.81 2.51 .88 Flange O.315 .315 .315 .8 60.80 1.3 50.375 .E-Z Miner TM Couplings BW Series Style PA22 22-1/2° Elbow Flange SAE Code 61 C Part Number BW08-08PA22 BW08-12PA22 BW12-12PA22 BW12-16PA22 BW16-16PA22 BW16-20PA22 BW16-24PA22 BW20-20PA22 BW20-24PA22 BW24-24PA22 BW24-32PA22 BW32-32PA22 Hose I.81 2.9 85.75 1. DN Inch 12 12 20 20 25 25 25 32 32 32 40 40 50 1/2 1/2 3/4 3/4 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 2 Thread Size (B) Tube Drop MM Inch 12.73 6.9 73.75 .8 17.00 8.50 1.3 71.33 3.5 44.50 .315 .00 8.52 .315 .43 (A) Cut-Off MM Inch 55.9 71.81 2.315 .9 99.00 8.265 .49 .00 2.72 .38 .5 78.38 2.4 71.5 12.315 .4 1.5 12.50 1.19 1.315 .1 44.3 50.19 1.66 .49 .9 68.24 5. DN Inch 12 2 20 20 25 25 25 32 32 40 40 50 Thread Size 1/2 1/2 3/4 3/4 1 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 (B) Tube Drop MM Inch 9.375 .30 2.1 44.00 8.50 1.50 2.1 44.265 .38 3.4 71.4 124.2 12.38 2.38 4.19 2.6 71.7 63.375 23 .8 60.6 85.80 2.7 84.38 2.0 15.2 71.7 (A) Cut-Off MM Inch .2 38.00 8.5 21.00 8.3 101.00 8.00 8.43 2.7 12.4 .84 .67 .3 36.8 18.8 132.D.34 4.71 2.75 2.5 50.00 8.07 3.91 4.2 12.8 60.50 1.89 3.315 .5 44.4 20.81 2.38 2. MM Inch 30.01 3.67 .73 6.2 38.315 .265 .81 (C) Thickness MM Inch 6.2 2.50 .00 8.2 71.7 13.315 .60 .52 9.00 2.00 8.82 3.52 9.7 16.48 .20 Flange O.4 71.375 Style PA30 30° Elbow Flange SAE Code 61 C Part Number BW08-08PA30 BW08-12PA30 BW12-12PA30 BW12-16PA30 BW16-16PA30 BW16-20PA30 BW16-24PA30 BW20-20PA30 BW20-24PA30 BW20-24PA30M BW24-24PA30 BW24-32PA30 BW32-32PA30 Hose I.0 24.0 17.38 2.0 2.315 .0 12.97 58.50 .8 60.16 4.315 .52 .4 71.71 2.50 .D.62 .00 2.D.1 38.73 6.3 60.265 .83 2.48 .5 50.3 15.00 8.5 61.315 .00 2.7 17.7 12. 50 1.1 103.49 4.8 50.65 3.315 .73 8.3 60.1 56.315 .5 44.4 55.3 139.375 .375 .81 2.315 .00 8.4 (A) Cut-Off MM Inch .05 1.50 1. MM Inch 30.4 70.1 44.74 2.80 3.22 2.265 .00 8.81 (C) Thickness MM Inch 6.265 .8 45.D.72 2.00 2.06 3.95 1.315 .3 71.2 38.73 6.18 2.18 (A) Cut-Off MM Inch 54.91 3.00 2.5 38.82 .00 8.67 4.315 .2 92.4 68.9 69.605 4.8 20.50 1.77 2.315 .8 2.315 .8 50.75 1.265 .56 1.5 117.1 112.4 80.41 1.12 1.60 1.74 2.6 138.86 1.38 2.2 30.315 .00 9.8 60.0 122.2 38.50 Flange O.5 19.1 52.52 9.7 28.8 50.4 1.8 19.375 Style PA60 60° Elbow Flange SAE Code 61 C Part Number BW08-08PA60 BW08-12PA60 BW12-12PA60 BW12-16PA60 BW16-16PA60 BW16-20PA60 BW20-20PA60 BW20-20PA60M BW20-24PA60 BW24-24PA60 BW24-32PA60 BW32-32PA60 24 Hose I.4 1.00 8.20 2.50 1.3 71.9 28.315 .00 8.9 21.315 .4 71.6 34.19 1.75 2.38 2.24 2.77 5.43 5.9 71.81 (C) Thickness MM Inch 6.38 2.7 30.0 74.5 121.315 .38 2.40 1.8 35.1 29.00 6.7 65.00 8.1 44.77 2.19 1.00 2.3 60.73 8.69 .19 1.75 1.00 2.73 8.45 4.73 6.8 57.73 6.45 Flange O.265 .00 8.9 56.52 9.21 1.4 71.3 113.17 1.5 35.8 93.0 88.78 .8 1.6 70.5 50.8 35.D. MM Inch 30.00 8.7 24.86 .41 1.13 .315 .00 8.81 2.7 43.D.2 54.73 6.375 .75 2.8 60.5 50.52 .1 44.13 2.78 . DN Inch 10 12 12 12 20 20 25 25 32 32 40 40 50 Thread Size 3/8 1/2 1/2 1/2 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 (B) Tube Drop MM Inch 17.37 2.4 74.77 1. DN Inch 12 12 20 20 25 25 32 32 32 40 40 50 1/2 1/2 3/4 3/4 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 2 Thread Size (B) Tube Drop MM Inch 26.91 2.26 55.52 .00 2.00 9.E-Z Miner TM Couplings BW Series Style PA45 45° Elbow Flange SAE Code 61 C Part Number BW06-08PA45 BW08-08PA45 BW08-12PA45 BW08-16PA45 BW12-12PA45 BW12-16PA45 BW16-16PA45 BW16-20PA45 BW20-20PA45 BW20-24PA45 BW24-24PA45 BW24-32PA45 BW32-32PA45 Hose I.50 3.1 44.315 .05 4.8 21.5 44.0 40.00 8.5 2.82 4.265 .7 104.D.75 1.1 38.11 4.0 89.265 .00 8.265 .315 .13 2.71 2. 3 60.11 4.7 119.6 98.2 (A) Cut-Off MM Inch 1.4 124.375 .98 4.83 5.315 .25 3.73 8.00 8.1 1.38 2.3 127.0 90.8 1.22 6.19 1.88 3.00 1.80 6.3 60.4 53.8 60.0 49.38 2.6 98.25 1.12 2.00 2.375 .3 80.75 1.11 4.315 .9 171.8 50.315 .4 71.81 2.2 30.00 9.00 8.6 81.00 1.95 2.00 8.00 8.31 1.8 55.24 4.88 3.22 3.63 1.80 2.98 Flange O.265 . DN Inch BW08-08PA67 BW08-12PA67 BW08-16PA67 BW12-12PA67 BW12-16PA67 BW12-20PA67 BW16-16PA67 BW16-20PA67 BW20-20PA67 BW20-24PA67 BW24-24PA67 BW24-32PA67 BW32-32PA67 12 12 12 20 20 20 25 25 32 32 40 40 50 Thread Size 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 (B) Tube Drop MM Inch 31.4 1.55 53.7 130.2 117.3 60.315 .6 114.265 .31 (C) Thickness MM Inch 6.00 8.315 .2 44.9 98.4 60.5 44.00 6.5 50.98 4.5 38.38 2.75 2.3 50.8 50.38 2.19 1.5 68.13 3.00 2.69 2.8 45.73 8.265 .81 2.3 2.81 (C) Thickness MM Inch 6.92 2.6 1.5 105.3 53.1 44.9 75.00 8.8 138.81 2.00 6.68 4.4 84.00 2.8 44.4 71.28 3.94 1.73 6.4 41.1 61.315 .375 .52 9.17 1.62 2.0 73.315 .D.315 .4 41.2 74.00 8.08 3.52 9.11 4.315 .3 71.315 .80 3.00 5.99 2.265 .75 2.8 60.315 .81 2.75 2.5 61.375 25 .4 99.50 1.72 2.6 79.13 4.315 .7 51.12 6.0 95.3 31.5 38.19 1.5 79.6 105.31 5.68 3.52 9.00 8.315 .3 60.4 71.5 43.44 2.71 1.13 3.315 .50 8.00 8.E-Z Miner TM Couplings BW Series Style PA67 67° Elbow Flange SAE Code 61 C Part Number Hose I.2 38.5 104.50 1.4 71.75 2.6 99.52 9.75 1.4 125.00 8. MM Inch 30.00 8.40 3.4 121.16 3.9 99.8 44.62 2.00 9.D.94 3.5 104.6 126.00 8.50 1.00 8.00 8.5 50.9 55.5 50.9 70.2 104.75 2.8 50.315 .315 .10 2.42 3.36 3.00 8.4 43.5 45.79 2.6 79.16 2.00 2.4 171.9 71.88 1.5 43.7 78.9 98.19 1.88 3.315 .0 70.62 2.73 6.1 38.2 80.38 2.265 .0 60.375 .4 56.73 6.00 8.38 2.75 1.73 8.75 3.63 1.79 (A) Cut-Off MM Inch 47.52 9.8 60.94 6.87 1.75 5.00 2.73 6.6 126.265 .315 .00 2.9 98.1 126.94 2.00 2.89 3.1 101.1 44.315 .79 2.00 4.38 2.1 38.73 6.12 2.265 .3 71.00 8.2 203.93 3.50 1.2 30.00 8.52 9.6 82.265 .52 .375 Style PA90 90° Elbow Flange SAE Code 61 C Part Number BW06-08PA90 BW08-08PA90 BW08-08PA90M BW08-12PA90 BW08-12PA90M BW08-16PA90 BW12-12PA90 BW12-12PA90M BW12-12PA90L BW12-16PA90 BW12-16PA90M BW12-20PA90M BW16-16PA90 BW16-16PA90M BW16-20PA90 BW16-20PA90M BW16-24PA90 BW20-20PA90 BW20-20PA90M BW20-20PA90L BW20-20PA90X BW20-24PA90 BW20-24PA90M BW24-24PA90 BW24-24PA90M BW24-24PA90L BW24-32PA90 BW24-32PA90L BW24-32PA90M BW32-32PA90 BW32-32PA90M BW32-32PA90L BW32-40PA90 Hose I.52 9.04 1.1 147.44 Flange O.73 6.3 83.81 2.00 8.9 47.8 43.81 3.00 8.3 69.50 1.73 6.12 2.6 81.2 168.51 1.75 1.315 .38 2.5 127.315 .14 4.315 .00 8.2 79.5 44.50 4.00 2.85 1.D.74 4.3 60.1 38.0 122.375 .6 165.315 .7 70.9 117.38 2.50 1.8 33.8 50.25 1.80 4.79 2.00 4.265 .1 44.265 .375 .00 2.75 4.8 50.91 4.9 74.2 48.D.4 71.375 .315 .6 62.3 50. DN Inch 10 12 12 12 12 12 20 20 20 20 20 20 25 25 25 25 25 32 32 32 32 32 32 40 40 40 40 40 40 50 50 50 50 3/8 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 Thread Size (B) Tube Drop MM Inch 38.4 71.2 38.81 2.265 .5 50.88 4.52 .315 .1 44.80 1.76 2.73 8.0 84.3 71.88 4. MM Inch 30.13 3.17 3.93 3.50 1.0 104.8 70.109 5.71 1.315 .00 8. 00 .50 2.73 6.6 1.315 .265 .6 83.00 8.8 87.00 8.00 2.1 38.52 .2 64.38 2.75 (C) Thickness MM Inch 6.50 1.88 3.315 .D.3 70.52 (A) Cut-Off MM Inch 65.2 2.5 38.2 79.265 .265 .315 .6 63.27 3.69 5.81 (C) Thickness MM Inch 6.1 44.12 3.75 2.50 1.315 .19 1.38 2.D.1 60.27 Flange O.1 2.5 1.315 Style PA110 110° Elbow Flange SAE Code 61 C Part Number Hose I.53 (A) Cut-Off MM Inch 38.6 73.315 .9 108.4 1.5 1.76 (A) Cut-Off MM Inch 15.7 2.2 38.50 1.E-Z Miner TM Couplings BW Series Style PA100 100° Elbow Flange SAE Code 61 C Part Number Hose I.00 .73 8.53 1.1 44.50 1.3 71.59 3.33 2.95 2.12 3.265 .D.D.1 84.5 50.73 8.75 (C) Thickness MM Inch 6.2 .1 44.3 80.29 3.5 1.73 6.74 Flange O.0 58.00 8. DN Inch 12 20 20 1/2 3/4 3/4 Thread Size (B) Tube Drop MM Inch 53.73 8. MM Inch 38.31 3. DN Inch BW12-12PA100 BW12-16PA100 20 20 Thread Size 3/4 3/4 (B) Tube Drop MM Inch 59.45 Flange O.D.8 140.36 2.34 4.9 76.17 3.7 83.50 2. MM Inch 30.6 93.00 9.265 .00 2. DN Inch BW08-12PA110 BW12-12PA110 BW16-16PA110 BW20-20PA110 BW20-24PA110 BW24-24PA110 BW32-32PA110 12 20 25 32 32 40 50 Thread Size 1/2 3/4 1 1-1/4 1-1/4 1-1/2 2 (B) Tube Drop MM Inch 49.8 60.61 1.D. MM Inch 38.9 44.375 Style PA135 135° Elbow Flange SAE Code 61 C Part Number BW08-08PA135 BW12-12PA135 BW12-16PA135 26 Hose I.3 60. 85 (A) Cut-Off MM Inch 60.265 Style PAK45 45˚Elbow Flange SAE Code 61 (Komatsu) C Part Number BW08-10PAK45 Hose I.D.265 PAK End Style use standard -10 Flange O-Ring 27 .D.3 2.9 2. DN Inch 12 1/2 Thread Size (B) Tube Drop MM Inch 47.34 (C) Thickness MM Inch 6.D.73 .2 1.34 (C) Thickness MM Inch 6.5 2. MM Inch 34.D.2 1.02 Flange O.83 Flange O. MM Inch 34.D.265 Style PAK90 90˚Elbow Flange SAE Code 61 (Komatsu) C Part Number BW08-10PAK90 Hose I.34 (C) Thickness MM Inch 6.73 . DN Inch 12 Thread Size Tube Drop MM Inch 1/2 (A) Cut-Off MM Inch 51. MM Inch 34.38 Flange O.9 .0 1.D. DN Inch 12 Thread Size 1/2 (B) Tube Drop MM Inch 22.73 .90 (A) Cut-Off MM Inch 71.2 1.E-Z Miner TM Couplings BW Series Style PAK Flange SAE Code 61 (Komatsu) C Part Number BW08-10PAK Hose I. 88 1.495 .D.7 47.79 Flange O.48 1.25 1.303 .375 .13 (C) Thickness MM Inch 7.21 3.28 9.63 1.13 (C) Thickness MM Inch 7.13 1.405 .375 .52.52 10.345 .8 64.76 9.5 81.5 147.9 47.8 65.88 2. DN Inch 12 20 20 25 25 32 32 40 50 Thread Size Tube Drop MM Inch 1/2 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 2 (A) Cut-Off MM Inch 50.1 63.8 .8 88.6 70.52 10.41 1.405 .52.7 54.67 3.7 47.8 28.78 5.9 72.88 2.13 2.28 9.5 79.9 47.5 79.375 .78 .8 23.9 115.1 47.18 3.6 44.74 8.2 2.D.59 (A) Cut-Off MM Inch 55.77 2.88 2.76 9.52.5 1.1 63.E-Z Miner TM Couplings BW Series Style PH Flange SAE Code 62 C Part Number BW08-08PH BW12-12PH BW12-16PH BW16-16PH BW16-20PH BW20-16PH BW20-20PH BW24-24PH BW32-32PH Hose I.405 .7 41.2 80.7 54.20 2.5 1. 9.38 4.5 37. 9.47 2.0 65.495 Style PH45 45° Elbow Flange SAE Code 62 C Part Number BW08-08PH45 BW12-12PH45 BW12-16PH45 BW16-16PH45 BW16-20PH45 BW20-16PH45 BW20-20PH45 BW24-24PH45 BW32-32PH45 28 Hose I. 10.8 62.58 2.57 12.00 2.57 .13 2. DN Inch 12 20 20 25 25 32 32 40 50 1/2 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 2 Thread Size (B) Tube Drop MM Inch 19.5 31.88 2.57 .1 47.20 3.53 Flange O.50 3.495 .3 85.6 100.2 2.D.345 .93 1.28 12.495 .84 2.88 1.92 3.7 41.375 .375 .57 12. 10.50 3.4 121.12 1.13 1.73 2.D.375 .25 1.55 2.23 1.52.405 .95 4.28 12.74 8.48 3.20 1.7 54.9 81.7 54.2 74. MM Inch 31.3 35.6 30. MM Inch 31.63 1.4 67.303 . MM Inch 41.13 2.8 2.78 5. MM Inch 41.7 41.0 . 10.405 .560 .2 127.3 96.92 2.50 3.560 29 .375 .9 63.6 66.52.D.1 137.9 47.88 2.71 2.67 (A) Cut-Off MM Inch 74.9 47.560 .99 3.95 2.E-Z Miner TM Couplings BW Series Style PH90 90° Elbow Flange SAE Code 62 C Part Number BW08-08PH90 BW12-12PH90 BW12-16PH90 BW16-16PH90 BW16-20PH90 BW20-20PH90 BW24-24PH90 BW32-32PH90 Hose I.57 . DN Inch 20 20 25 25 Thread Size (B) Tube Drop MM Inch 3/4 3/4 1 1 (A) Cut-Off MM Inch 65.62 .560 .5 63.7 47.7 74.61 2.0 78.560 . DN Inch 12 20 20 25 25 32 40 50 Thread Size 1/2 3/4 3/4 1 1 1-1/4 1-1/2 2 (B) Tube Drop MM Inch 43.4 67.303 .57 12.69 3.63 2.88 1.2 14. MM Inch 31.3 63.7 47.88 1.63 1.345 .1 1.63 Flange O.2 .560 .25 1.59 .7 2.2 14.58 2.62 .D.63 1.13 2.00 Flange O.13 (C) Thickness MM Inch 7.67 3.14 5.94 2.2 .28 10.8 15.2 14.7 68.D.93 4.5 1.2 14. DN Inch 20 20 25 25 3/4 3/4 1 1 Thread Size (B) Tube Drop MM Inch 15.1 1.2 14.8 66.88 2.63 1.2 14.1 1.7 54.D.1 63.74 8.8 74.88 2.80 2.0 76.50 2.495 .5 1.9 105.9 99.8 17.13 (C) Thickness MM Inch 14.6 66.12 3.560 Style PHC22 221/2° Elbow O-Ring Flange SAE Code 62 – Caterpillar Style C Part Number BW12-12PHC22 BW12-16PHC22 BW16-16PHC22 BW16-20PHC22 Hose I. 9.375 .5 79.41 (A) Cut-Off MM Inch 45.69 2.D.76 9.10 Flange O.50 2.4 79.560 .13 (C) Thickness MM Inch 14.51 2.7 54.88 1.7 47.1 54.D.94 2.28 12.9 47.52.7 54.6 68.0 15.2 75.495 Style PHC O-Ring Flange SAE Code 62 – Caterpillar Style C Part Number BW12-12PHC BW12-16PHC BW16-16PHC BW16-20PHC Hose I.405 . 63 1.7 54.560 .02 Flange O.7 26.7 47.00 3. DN Inch 20 20 25 25 3/4 3/4 1 1 Thread Size (B) Tube Drop MM Inch 41.560 .7 48.92 2. DN Inch 20 20 25 25 Thread Size 3/4 3/4 1 1 (B) Tube Drop MM Inch 20.01 3.D.5 31.2 .0 50.560 .D.7 47.1 1.6 1.63 1.3 19.05 1.7 41.81 (A) Cut-Off MM Inch 76.8 3.2 14.2 75.560 .3 20. DN Inch 20 20 25 25 Thread Size 3/4 3/4 1 1 (B) Tube Drop MM Inch 26.2 14.06 Flange O.560 .7 3.560 .2 .1 1.0 76.01 3.13 (C) Thickness MM Inch 14.2 14.2 74.2 14. MM Inch 41.2 .3 74.88 1.13 (C) Thickness MM Inch 14.51 3.64 1.1 1.91 3.88 2.8 1.25 (A) Cut-Off MM Inch 74.5 76.05 1.98 3.5 89.2 14.2 14.D.560 Style PHC45 45° Elbow O-Ring Flange SAE Code 62 – Caterpillar Style C Part Number BW12-12PHC45 BW12-16PHC45 BW16-16PHC45 BW16-20PHC45 Hose I.75 .88 2.88 2.8 77.7 47.92 2.9 47.560 .57 Flange O.13 (C) Thickness MM Inch 14.2 14.D.560 .9 47.E-Z Miner TM Couplings BW Series Style PHC30 30° Elbow O-Ring Flange SAE Code 62 – Caterpillar Style C Part Number BW12-12PHC30 BW12-16PHC30 BW16-16PHC30 BW16-20PHC30 Hose I. MM Inch 41.6 .80 .8 2.88 1. MM Inch 41.1 20.D.80 .16 1.560 Style PHC60 60° Elbow O-Ring Flange SAE Code 62 – Caterpillar Style C Part Number BW12-12PHC60 BW12-16PHC60 BW16-16PHC60 BW16-20PHC60 30 Hose I.99 (A) Cut-Off MM Inch 76.00 2.D.7 54.7 29.88 1.560 .63 1.89 1.2 14.2 14.7 54.560 .3 76.2 90.64 1.9 47. 05 3.3 68.560 Style PHC90 90° Elbow O-Ring Flange SAE Code 62 – Caterpillar Style Part Number BW12-12PHC90 BW12-16PHC90 BW16-16PHC90 BW16-20PHC90 Hose I.37 Flange O.9 47.560 .560 .6 2.66 2.13 (C) Thickness MM Inch 14.3 77. MM Inch 41.D.2 14.57 2.15 2.2 14.6 67.88 1.0 74.66 Flange O.91 2.560 31 .63 1.560 .D.33 3.6 65.2 14.7 47.20 3.88 2.88 1. MM Inch 41.2 .4 1.9 47.7 54.2 14. DN Inch 20 20 25 25 Thread Size 3/4 3/4 1 1 (B) Tube Drop MM Inch 49.66 2.63 1.2 .7 3.6 85.96 2.4 2.91 2.2 14.5 84.8 54.2 14.7 47.13 (C) Thickness MM Inch 14.15 2.560 .69 (A) Cut-Off MM Inch 74.560 .560 .88 2.D.66 2.0 67.D. DN Inch 20 20 25 25 3/4 3/4 1 1 Thread Size (B) Tube Drop MM Inch 67.1 1.7 54.1 1.7 57.26 (A) Cut-Off MM Inch 81.7 54.6 67.E-Z Miner TM Couplings BW Series Style PHC67 67° Elbow O-Ring Flange SAE Code 62 – Caterpillar Style C Part Number BW12-12PHC67 BW12-16PHC67 BW16-16PHC67 BW16-20PHC67 Hose I. D.4 76.27 2.D.3 Flange O.49 Style MJ Male SAE 37° Flare Part Number NB20-20MJ NB24-24MJ NB32-32MJ Hose I.7 71.D.D.7 63.D. DN Inch 32 40 50 1-1/4 1-1/2 2 Thread Size 1-5/8 12 1-7/8 12 1-1/2 12 (B) Tube Drop MM Inch (A) Cut-Off MM Inch 50.2 1.80 Style FJ Swivel Female SAE 37° Flare Part Number NB20-20FJ NB24-24FJ NB32-32FJ 32 Hose I.00 2. MM Inch (C) Thickness MM Inch Flange O.9 57.99 .E-Z Miner TM Couplings NB Series Style MP Rigid Male NPTF Part Number NB20-20MP NB24-24MP NB32-32MP Hose I.0 2.D.24 2. MM Inch (C) Thickness MM Inch 2. DN Inch 32 40 50 1-1/4 1-1/2 2 Thread Size (B) Tube Drop MM Inch 1-5/8 12 1-7/8 12 2-1/2 12 (A) Cut-Off MM Inch 50.22 2.1 59. MM Inch (C) Thickness MM Inch Flange O.35 2.8 56.97 2. DN Inch 32 40 50 1-1/4 1-1/2 2 Thread Size (B) Tube Drop MM Inch 1-1/4 11-1/2 1-1/2 11-1/2 2 11-1/2 (A) Cut-Off MM Inch 56. 405 .1 63.57 47.13 3.50 2.6 1.7 54.D.08 3.13 2.6 44.23 Style PH Flange SAE Code 62 Part Number NB20-16PH NB20-20PH NB20-24PH NB24-20PH NB24-24PH NB24-32PH NB32-32PH NB32-24PH Hose I.50 9.57 12.5 37.4 3.5 54.6 56.99 3. MM Inch (C) Thickness MM Inch 1.09 3. 10.48 1.5 79.D.57 12.58 (A) Cut-Off MM Inch 80.80 4.1 90. 10.28 12.495 .495 .495 .45 3.5 63.12 1.405 .405 .4 96.495 .88 2. DN Inch 32 40 1-1/4 1-1/2 Thread Size (B) Tube Drop MM Inch (A) Cut-Off MM Inch 1-11/16 12 2 12 50.13 2.27 3.82 3.62 1.50 3.7 Flange O.6 78.57 12. DN Inch 32 32 32 40 40 40 50 50 Thread Size (B) Tube Drop MM Inch 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 2 2 (A) Cut-Off MM Inch 67.64 Flange O.66 3.28 12.495 33 .495 .D.5 1.90 5.13 (C) Thickness MM Inch 9.405 .5 54.0 124.6 41.D.48 1. MM Inch 47.13 3.99 2.0 49. DN Inch 32 32 32 40 40 40 50 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 2 Thread Size (B) Tube Drop MM Inch 28.3 113.73 1.28 12.57 10.5 79.7 2.6 119.1 63.50 3.5 79.D.8 97.57 12.57 .1 63.75 4.95 2.57 12.2 37.52.6 65.5 83.375 .5 143.88 2.29 3.375 .18 3.57 10.1 63.7 54.50 2.13 2.E-Z Miner TM Couplings NB Series Style OFT Swivel Female O-Ring Face Seal Part Number NB20-20OFT NB24-24OFT Hose I.495 . MM Inch (C) Thickness MM Inch Flange O.68 4.3 83.52.28 12.6 95.1 101.5 79.495 .D.5 1.495 Style PH45 45° Elbow Flange SAE Code 62 Part Number NB20-16PH45 NB20-20PH45 NB20-24PH45 NB24-20PH45 NB24-24PH45 NB24-32PH45 NB32-32PH45 Hose I.1 78.13 2.57 .13 2. D.1 63.28 12.57 10.1 89. DN Inch 32 32 40 50 1-1/4 1-1/4 1-1/2 2 Thread Size (B) Tube Drop MM Inch 16.50 3.28 12.13 3. MM Inch 54.5 2.0 138.43 (A) Cut-Off MM Inch 96.4 113.560 Style PHC22 22 1/2° Elbow O-Ring Flange SAE Code 62 .35 3.1 63.2 .79 3.57 .0 3.13 (C) Thickness MM Inch 14.5 2. DN Inch 32 32 40 50 Thread Size (B) Tube Drop MM Inch 1-1/4 1-1/4 1-1/2 2 (A) Cut-Off MM Inch 78.495 .2 14.495 .09 5.405 .560 .6 84.24 Flange O.27 3.560 .64 .32 3.405 .2 14.52 4.5 3.1 102.5 110.50 2.7 102.5 63. DN Inch 32 32 40 40 40 50 Thread Size 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 2 (B) Tube Drop MM Inch 79.495 Style PHC 30° Elbow O-Ring Flange SAE Code 62 .8 3.2 14.85 1.13 3.04 4.5 2.560 .E-Z Miner TM Couplings NB Series Style PH90 90° Elbow Flange SAE Code 62 Part Number NB20-20PH90 NB20-24PH90 NB24-20PH90 NB24-24PH90 NB24-32PH90 NB32-32PH90 Hose I.3 18.Caterpillar Style Part Number NB20-20PHC NB20-24PHC NB24-24PHC NB32-32PHC Hose I.14 3.1 104.2 14.5 79.5 54.3 97.13 (C) Thickness MM Inch 10.Caterpillar Style Part Number NB20-20PHC22 NB20-24PHC22 NB24-24PHC22 NB32-32PHC22 34 Hose I.5 2.2 14.D.1 63.3 133.04 4.1 83.13 2.13 2.495 .5 79.0 83.5 79.82 3.0 21.07 3.7 3.47 Flange O.1 96.71 .560 .13 (C) Thickness MM Inch 14.2 .6 29.7 125.5 2.D.560 .4 79.560 . MM Inch 54.2 14.34 5.57 12.28 4.D.D.78 4.15 (A) Cut-Off MM Inch 85.8 96.2 3.78 4.57 12.5 79. MM Inch 54.13 2.D.560 .2 .50 3.1 63.5 63.95 Flange O.13 2. 5 63.13 (C) Thickness MM Inch 14.Caterpillar Style Part Number NB20-20PHC60 NB20-24PHC60 NB24-24PHC60 NB32-32PHC60 Hose I.560 .5 2.5 2.64 5.13 (C) Thickness MM Inch 14.13 2.73 2.560 .5 42.92 1.2 14.Caterpillar Style Part Number NB20-20PHC30 NB20-24PHC30 NB24-24PHC30 NB32-32PHC30 Hose I.D.93 4.8 1.02 1.560 .1 63.08 1.13 (C) Thickness MM Inch 14.D.560 .9 27.7 44. MM Inch 54.8 3.22 4.560 .5 .05 2.5 2.7 93.0 65. DN Inch 32 32 40 50 Thread Size 1-1/4 1-1/4 1-1/2 2 Tube Drop MM Inch 41.5 2.2 40.560 .560 .2 14.67 (A) Cut-Off MM Inch 89.6 91.72 Flange O.2 14.1 56.560 .4 25.2 14.2 .5 2.5 63.D.5 79.13 2.80 3.13 4.D.560 .21 2.3 126.1 63.560 35 .59 (A) Cut-Off MM Inch 105.5 3.9 140.0 145.54 Flange O.67 Flange O.2 14. MM Inch 54.68 5.2 .69 4.96 5.2 14.D.5 79. MM Inch 54.5 79.6 99.1 63.D.3 2.560 Style PHC60 60° Elbow O-Ring Flange SAE Code 62 .1 144.13 2.5 63.60 1.2 .9 119.2 14.2 14.5 2.560 Style PHC45 45° Elbow O-Ring Flange SAE Code 62 .4 3.54 3.8 117.5 3.53 3.2 64.Caterpillar Style Part Number NB20-20PHC45 NB20-24PHC45 NB24-24PHC45 NB32-32PHC45 Hose I. DN Inch 32 32 40 50 Thread Size 1-1/4 1-1/4 1-1/2 2 Tube Drop MM Inch 23.59 (A) Cut-Off MM Inch 96. DN Inch 32 32 40 50 1-1/4 1-1/4 1-1/2 2 Thread Size Tube Drop MM Inch 52.E-Z Miner TM Couplings NB Series Style PHC30 30° Elbow O-Ring Flange SAE Code 62 .2 14.0 107.5 3.62 1.1 4. 3 71.88 3.2 14.41 3.81 (C) Thickness MM Inch 8.560 .560 .32 2.2 101.50 2.01 4.79 4.10 3.8 83.D.D.560 .8 3.2 14.Caterpillar Style Part Number NB20-20PHC67 NB20-24PHC67 NB24-24PHC67 NB32-32PHC67 Hose I.6 73.29 3.2 14.99 (A) Cut-Off MM Inch 100.1 63.94 4.5 2.D.5 63.52 .D.7 125.0 3.560 .D.5 3.2 14.55 Flange O.560 Style PHC90 90° Elbow O-Ring Flange SAE Code 62 .2 14.6 3.560 .50 Flange O.6 96.13 (C) Thickness MM Inch 14.5 63.2 14. DN Inch 32 32 40 50 Thread Size 1-1/4 1-1/4 1-1/2 2 Tube Drop MM Inch 59.3 102.5 3.315 .2 .78 5.13 2.5 79.0 63.2 .5 79.04 4.79 3.Caterpillar Style Part Number NB20-20PHC90 NB20-24PHC90 NB24-24PHC90 NB32-32PHC90 Hose I. MM Inch 54. MM Inch 54.3 96.13 (C) Thickness MM Inch 14.94 Flange O.96 5.1 63.00 9.1 141.4 2.560 .D.E-Z Miner TM Couplings NB Series Style PHC67 67° Elbow O-Ring Flange SAE Code 62 .1 3.5 2.1 101.38 2.1 137. DN Inch 32 32 40 50 E-Z Miner Thread Size 1-1/4 1-1/4 1-1/2 2 TM Tube Drop MM Inch 78.5 2.560 Couplings HY Series Style PA Flange SAE Code 61 Part Number HY29-24PA HY29-32PA 36 Hose I.42 (A) Cut-Off MM Inch 96.4 2.7 89.5 2. MM Inch 60.13 2. DN Inch 45 45 1-13/16 1-13/16 Thread Size (B) Tube Drop MM Inch (A) Cut-Off MM Inch 86.9 126.375 . D.00 9.5 117.15 Style RO90T 90° Bent Tube Metric Swivel Female 24° Cone With O-Ring Part Number HY29-42RO52B90T Hose I.375 Style RO Metric Swivel Female 24° Cone With O-Ring Part Number HY29-42RO52B Hose I.3 114.12 4.D. DN Inch 45 45 Thread Size 1-13/16 1-13/16 (B) Tube Drop MM Inch 79.D.315 .D. MM Inch (C) Thickness MM Inch 4.9 Flange O. MM Inch 60. DN Inch 45 1-13/16 Thread Size M52 X 2 (B) Tube Drop MM Inch 51.50 (A) Cut-Off MM Inch 90. MM Inch (C) Thickness MM Inch 2.D.4 3.15 37 .8 2. DN Inch 45 1-13/16 Thread Size (B) Tube Drop MM Inch M52 X 2 (A) Cut-Off MM Inch 52.38 2.D.5 Flange O.04 (A) Cut-Off MM Inch 105. MM Inch (C) Thickness MM Inch 4.E-Z Miner TM Couplings HY Series Style PA90 90° Elbow Flange SAE Code 61 Part Number HY29-24PA90 HY29-32PA90 Hose I.81 (C) Thickness MM Inch 8.08 Style RO45T 45° Bent Tube Metric Swivel Female 24° Cone With O-Ring Part Number HY29-42RO52B45T Hose I.3 71.D.D.4 3.5 Flange O.8 2.56 4.4 2. DN Inch 45 1-13/16 Thread Size M52 X 2 (B) Tube Drop MM Inch 51.04 (A) Cut-Off MM Inch 105.62 Flange O.52 . 25 (A) Cut-Off MM Inch 21 24 32 38 .0 32.D. DN Inch 8 11 12 16 5/16 13/32 1/2 5/8 Thread Size 5/8-18 3/4-16 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 44.25 1.E-Z Miner TM Couplings BL Series Style TAST Male 45° Flare Swivel Straight Tube A Part Number BL06-06TAST BL08-08TAST BL10-10TAST BL12-12TAST Hose I.06 1.94 1.88 2.06 1. DN Inch 8 11 12 16 5/16 13/32 1/2 5/8 Thread Size (B) Tube Drop MM Inch 5/8-18 3/4-16 7/8-14 1-1/16 14 (A) Cut-Off MM Inch 48 51 59 63 Flange O.D.81 2.D.D.D.25 1. MM Inch (C) Thickness MM Inch Flange O.0 46.19 2.0 62.50 Style TA90T Male 45° Flare Swivel With 90° Bend A B Part Number BL06-06TA90T BL08-08TA90T BL10-10TA90T BL12-12TA90T 38 Hose I.0 1.75 1.D.12 1.94 1. MM Inch (C) Thickness MM Inch 1. MM Inch (C) Thickness MM Inch Flange O. DN Inch 8 11 12 16 5/16 13/32 1/2 5/8 Thread Size 5/8-18 3/4-16 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 24.31 2.50 Style TA45T Male 45° Flare Swivel With 45° Bend A B Part Number BL06-06TA45T BL08-08TA45T BL10-10TA45T BL12-12TA45T Hose I.45 (A) Cut-Off MM Inch 27 32 38 44 1.81 .0 28.75 .00 2.0 .50 1.0 56.0 27. 00 1.0 38.75 1. MM Inch (C) Thickness MM Inch Flange O.0 32.94 0.06 1. DN Inch 8 8 11 11 12 16 16 5/16 5/16 13/32 13/32 1/2 5/8 5/8 Thread Size (B) Tube Drop MM Inch 5/8-18 3/4-16 5/8-18 3/4-16 7/8-14 7/8-14 1-1/16 14 (A) Cut-Off MM Inch 43 44 44 44 48 60 60 Flange O.69 1.0 1.00 1.0 24.88 2.25 1.25 (A) Cut-Off MM Inch 27.75 1.0 57.38 Style TM45T Swivel Male Tube "O" With 45° Bend A B Part Number BL06-06TM45T BL06-08TM45T BL08-06TM45T BL08-08TM45T BL10-10TM45T BL12-12TM45T Hose I.25 1.0 27.0 25.88 1.75 1. MM Inch (C) Thickness MM Inch 1.88 2.0 32.D. MM Inch (C) Thickness MM Inch .0 44.75 1.0 32.0 54.94 0.0 44. DN Inch 8 8 11 11 12 16 5/16 5/16 13/32 13/32 1/2 5/8 Thread Size 5/8-18 3/4-16 5/8-18 3/4-16 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 22.0 1.38 2.19 (A) Cut-Off MM Inch 20 24 24.88 1.D.25 2.94 1.63 1.50 1.06 1.81 .0 .0 25.0 30.D.88 1.0 32.25 1.E-Z Miner TM Couplings BL Series Style TMS Swivel Male Tube "O" A Part Number BL06-06TMS BL06-08TMS BL08-06TMS BL08-08TMS BL10-10TMS BL12-10TMS BL12-12TMS Hose I.D.0 Flange O.0 48.50 Style TM90T Swivel Male Tube "O" With 90° Bend A B Part Number BL06-06TM90T BL06-08TM90T BL08-06TM90T BL08-08TM90T BL10-10TM90T BL12-10TM90T BL12-12TM90T Hose I.25 1. DN Inch 8 8 11 11 12 16 16 5/16 5/16 13/32 13/32 1/2 5/8 5/8 Thread Size 5/8-18 3/4-16 5/8-18 3/4-16 7/8-14 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 41.0 48.0 25.D.12 2.0 38.D.75 39 .00 1.0 57.0 48. 50 1.06 1.50 Style FA90T Swivel Female With 45° Seat.0 Flange O.0 38.0 .0 1.50 1.63 .00 1.63 .0 38.94 1.D.0 38.0 0.63 .0 44.0 32.94 0.0 38. 45° Bend A B Part Number BL06-06FA45T BL06-08FA45T BL08-06FA45T BL08-08FA45T BL10-08FA45T BL10-10FA45T BL12-10FA45T BL12-12FA45T Hose I.5 (A) Cut-Off MM Inch 27.E-Z Miner TM Couplings BL Series Style FAT Swivel Female 45° Seat With Straight Tube A Part Number BL06-06FAT BL06-08FAT BL08-06FAT BL08-08FAT BL10-08FAT BL10-10FAT BL12-10FAT BL12-12FAT Hose I.0 24.25 1.00 (A) Cut-Off MM Inch 20.0 32. MM Inch (C) Thickness MM Inch 1. 90° Bend A B Part Number BL06-06FA90T BL06-08FA90T BL08-06FA90T BL08-08FA90T BL10-08FA90T BL10-10FA90T BL12-10FA90T BL12-12FA90T 40 Hose I.25 1.0 32.0 32.0 16.D.50 1.D.D.0 16.0 16.75 1.75 1. MM Inch (C) Thickness MM Inch Flange O.0 38. DN Inch 8 8 11 11 12 12 16 16 5/16 5/16 13/32 13/32 1/2 1/2 5/8 5/8 Thread Size 5/8-18 3/4-16 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 14.0 1.0 38.0 20.25 1.75 Style FA45T Swivel Female With 45° Seat.25 1.D.0 24.0 38.25 1.0 24. DN Inch 8 8 11 11 12 12 16 16 5/16 5/16 13/32 13/32 1/2 1/2 5/8 5/8 Thread Size (B) Tube Drop MM Inch 5/8-18 3/4-16 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16 14 (A) Cut-Off MM Inch 27.25 1.0 25.94 0.0 32.0 32.50 1.0 38.0 32.0 44.94 0.25 1.0 32.06 1.0 24.D.0 32.63 .0 44.25 1.88 1.0 44.0 32.0 38.06 1.0 25. DN Inch 8 8 11 11 12 12 16 16 5/16 5/16 13/32 13/32 1/2 1/2 5/8 5/8 Thread Size 5/8-18 3/4-16 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 27.75 .0 16.0 38.50 1.50 1.25 1.50 1. MM Inch (C) Thickness MM Inch Flange O.50 1.56 .81 0.25 1. 56 .D.0 44.75 1.69 1.0 43. DN Inch 8 11 11 12 12 16 16 5/16 13/32 13/32 1/2 1/2 5/8 5/8 Thread Size 5/8-18 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 14.50 1.E-Z Miner TM Couplings BL Series Style TFS Swivel Female Tube "O" Straight Tube A Part Number BL06-06TFS BL06-08TFS BL08-06TFS BL08-08TFS BL10-08TFS BL10-10TFS BL10-12TFS BL12-10TFS BL12-12TFS Hose I.81 1.0 33.0 38.D.50 Style TF90T Swivel Female Tube “O” 90° Bend A B Part Number BL06-06TF90T BL06-08TF90T BL08-06TF90T BL08-08TF90T BL10-08TF90T BL10-10TF90T BL10-12TF90T BL12-10TF90T BL12-12TF90T Hose I. DN Inch 8 8 11 11 12 12 12 16 16 5/16 5/16 13/32 13/32 1/2 1/2 1/2 5/8 5/8 Thread Size (B) Tube Drop MM Inch 5/8-18 3/4-16 5/8-18 3/4-16 3/4-16 7/8-14 1-1/16 14 7/8-14 1-1/16 14 (A) Cut-Off MM Inch 35.38 1.0 38.D.0 24.0 24.25 1.0 38.D.88 .50 1.D.81 1.0 38.0 44.0 0.88 .75 (A) Cut-Off MM Inch 27.94 0.D.0 38.50 1. MM Inch (C) Thickness MM Inch 1.0 32.0 38.0 Flange O.0 1.25 1.0 32.0 .0 16.12 1.0 38.0 16.0 33.25 1.31 1.0 46.0 32.06 1.75 1. DN Inch 8 8 11 11 12 12 12 16 16 5/16 5/16 13/32 13/32 1/2 1/2 1/2 5/8 5/8 Thread Size 5/8-18 3/4-16 5/8-18 3/4-16 3/4-16 7/8-14 1-1/16 14 7/8-14 1-1/16 14 (B) Tube Drop MM Inch 28.0 44.75 41 .50 1.94 .94 1.0 33.63 .0 44.81 0.31 1.50 1.0 46.0 46.63 .50 1.0 38.69 1.0 44.75 1.0 32.0 22.0 44.0 43. MM Inch (C) Thickness MM Inch Flange O.0 32.75 1.0 24. MM Inch (C) Thickness MM Inch Flange O.81 Style TF45T Swivel Female Tube “O” 45° Bend A B Part Number BL06-06TF45T BL08-06TF45T BL08-08TF45T BL10-08TF45T BL10-10TF45T BL12-10TF45T BL12-12TF45T Hose I.0 1.31 1.25 1.25 1.50 1.0 22.0 24.94 (A) Cut-Off MM Inch 20.05 1.0 38. 55 Style MJ Male 37˚ Flare A Part Number HR24-24MJ HR32-32MJ 42 Hose I.0 1.63 2.1 64.0 38.0 41. DN Inch 8 11 11 12 12 16 16 Thread Size (B) Tube Drop MM Inch 5/16 13/32 13/32 1/2 1/2 5/8 5/8 (A) Cut-Off MM Inch 38.50 1.63 1.8 Flange O.25 1.63 1.D.88 2.0 Flange O.0 38.0 51.4 1.0 51. DN Inch 8 11 12 16 E-Z Miner Thread Size (B) Tube Drop MM Inch 5/16 13/32 1/2 5/8 TM 32.75 Style RM90T Hose Splicer (Use With New Hose Only) A Part Number BL06-06RM90T BL08-08RM90T BL10-10RM90T BL12-12RM90T Hose I.0 44. MM Inch (C) Thickness MM Inch Flange O.D.8 56.50 1.0 B 1.22 .0 41. DN Inch 40 50 1 1/2 2 Thread Size (B) Tube Drop MM Inch 1-7/8 12 2-1/2 12 (A) Cut-Off MM Inch 54.D.37 1.0 41.63 2.D.00 Couplings HR Series Style FJ Swivel Female 37˚ Flare A Part Number HR24-24FJ HR32-32FJ Hose I.0 38. MM Inch (C) Thickness MM Inch 2.0 44.0 38.25 1.D.D.D.75 1. MM Inch (C) Thickness MM Inch 1.0 41.50 1.37 1.E-Z Miner TM Couplings BL Series Style RM Hose Splicer (Use With New Hose Only) A Part Number BL06-06RM BL08-06RM BL08-08RM BL10-08RM BL10-10RM BL12-10RM BL12-12RM Hose I. DN Inch 40 50 1 1/2 2 Thread Size 1-7/8 12 2-1/2 12 (B) Tube Drop MM Inch (A) Cut-Off MM Inch 47.00 (A) Cut-Off MM Inch 32.13 2. 8 Flange O.41 Flange O.E-Z Miner TM Couplings HR Series Style MP Male NPTF A Part Number HR24-24MP HR32-32MP Hose I.00 (C) Thickness MM Inch 9. DN Inch 50 50 65 65 75 Thread Size (B) Tube Drop MM Inch 2 2 2 1/2 2 1/2 3 (A) Cut-Off MM Inch 83.9 105.6 101.88 Flange O.76 (A) Cut-Off MM Inch 90.38 4.D.53 9.00 4.3 81.31 4. MM Inch (C) Thickness MM Inch 1.SAE Code 61 B A Part Number HR40-40PA22 HR40-48PA22 HR48-48PA22 Hose I.6 2.7 85.6 3.6 101.D.0 48.94 .53 9.375 .375 C Style PA22 22 1/2˚ Elbow Flange .00 (C) Thickness MM Inch 9.6 3.62 .D.375 .53 9.375 .5 77.375 .53 .28 3.D.D.53 9.6 98.4 84. MM Inch 71.00 4.6 3.9 3.2 86.7 19.92 Style PA Flange .375 .53 .9 . DN Inch 65 65 75 Thread Size 2 1/2 2 1/2 3 (B) Tube Drop MM Inch 15.31 4.1 101.D.2 77.3 . MM Inch 84.53 9.375 .1 84.9 23.04 3.375 C B A Part Number HR40-40PA30 HR40-48PA30 Hose I.53 . MM Inch 84.D.7 15.57 3.94 (A) Cut-Off MM Inch 98.SAE Code 61 C A Part Number HR32-32PA HR32-40PA HR40-40PA HR40-48PA HR48-48PA Hose I.375 43 .88 3.375 .81 3.00 Style PA30 30˚ Elbow Flange .17 Flange O. DN Inch 65 65 2 1/2 2 1/2 Thread Size (B) Tube Drop MM Inch 23.1 101.1 101.31 3.62 .6 3. DN Inch 40 50 1 1/2 2 Thread Size (B) Tube Drop MM Inch 1-1/2 11-1/2 2-11 1/2 (A) Cut-Off MM Inch 46.SAE Code 61 (C) Thickness MM Inch 9.52 9.04 3.53 9.31 4.D.81 1.21 3. 0 128.62 5.62 3.24 5.D.1 116.09 (A) Cut-Off MM Inch 110.E-Z Miner TM Couplings HR Series Style PA45 45˚Elbow Flange .8 4.52 9.00 1.04 5.0 117.5 159.6 2.00 9.53 9.375 .375 Style PA67 67 1/2˚Elbow Flange .3 141.6 101.SAE Code 61 B C A Part Number HR32-24PA90 HR32-32PA90 HR32-40PA90 HR40-40PA90 HR40-48PA90 HR48-48PA90 44 Hose I.53 9.31 3.D.62 4.SAE Code 61 C B A Part Number HR40-40PA60 HR48-48PA60 Hose I. MM Inch 84.1 4.58 (A) Cut-Off MM Inch 95.375 . DN Inch 65 75 Thread Size 2 1/2 3 (B) Tube Drop MM Inch 66.00 4.375 Style PA90 90˚Elbow Flange .0 107.53 .D.53 9.53 .375 . MM Inch 84.29 Flange O.57 4.38 Flange O.375 Style PA60 60˚Elbow Flange .53 9.31 4.SAE Code 61 C B A Part Number HR40-40PA67 Hose I. MM Inch 71.6 3.77 2.2 3.04 6.0 162.73 4.33 4.12 (A) Cut-Off MM Inch 129.0 53. DN Inch 50 50 50 65 65 75 2 2 2 2 1/2 2 1/2 3 Thread Size (B) Tube Drop MM Inch 94.7 128.52 9.3 111.72 1.3 117.375 .53 .31 (C) Thickness MM Inch 9.24 4. MM Inch 60.7 107.D.6 101.1 147.7 45.375 .10 Flange O.7 3.4 84.38 2.8 43.D.81 3.3 71.79 Flange O.00 (C) Thickness MM Inch 8.4 84.19 (A) Cut-Off MM Inch 126.1 3.375 .375 . DN Inch 50 65 65 75 Thread Size 2 2 1/2 2 1/2 3 (B) Tube Drop MM Inch 50.5 81.1 101. DN Inch 65 Thread Size 2 1/2 (B) Tube Drop MM Inch 79.00 (C) Thickness MM Inch 9.1 2.7 114.57 5.1 3.81 3.0 2.74 4.00 4.00 (C) Thickness MM Inch 9.D.53 9.D.375 .98 6.375 .53 9.31 4.SAE Code 61 C B A Part Number HR32-32PA45 HR40-40PA45 HR40-48PA45 HR48-48PA45 Hose I.D.6 2.1 101.1 101.50 4.1 84.31 4.53 .0 116.315 .5 5.37 4. Length Pattern GA8 .630 .578 1.Spring Guards OPEN WOUND CONTINUOUS SPRING GUARD MMB MMS MMH -4 1442-95 -6 -8 -10 -12 -16 -20 -24 -32 AVAILABLE IN 10' LENGTHS Part Number 1456-95 1457-95 1460-95 I.D.797 . .D.250 10' GA49 3.375 20' GA24 1.977 1.340 .359 1463-95 1464-95 2.547 .953 1.500 .375 20' 20' 20' 25' 25' 25' 20' 20' 25' 20' 25' 25' 20' 20' 20' 20' 20' 10' FLAT ARMOR CONTINUOUS SPRING GUARD MMB MMS MMH -4 -6 -8 -10 -12 -16 -20 -24 -32 AVAILABLE IN 10' LENGTHS Part Number 1573-95 1574-95 I.D.000 2.560 . Part Number I.915 .000 10' GA36 2.685 .642 1.230 1.D.820 .225 2.859 3.300 2.660 2.062 2.125 20' GA20 1.D.700 .250 20' GA22 1.500 .906 Part Number 1580-95 I.500 20' GA11 .738 .D.725 1465-95 1447-95 1449-95 1450-95 1454-95 1456-95 1459-95 1463-95 1450-95 1453-95 1455-95 1460-95 1463-95 Additional Spring Guards I.125 1.625 20' GA28 1.375 1.031 . 2.015 1.062 10' 45 .675 .700 AVAILABLE IN 25' LENGTHS Part Number 1560-95 1561-95 1562-95 1563-95 1565-95 1566-95 1567-95 1568-95 1570-95 1571-95 I. 2.650 1.600 1.150 1.150 2.100 2.865 .062 25' GA18 1.850 1584-95 1562-95 1564-95 1566-95 1567-95 1569-95 1570-95 1581-95 1580-95 1585-95 1564-95 1567-95 1579-95 1577-95 1570-95 1581-95 1774-95 1579-95 1569-95 1578-95 1572-95 1574-95 Additional Spring Guards Part Number I.D.785 .750 20' GA32 2.278 1.140 1.812 1.852 .183 1.250 2.520 1.110 2. 2. 3.890 2.671 .670 2.906 .750 .625 .438 . Part Number I.D.040 1. .328 1451-95 1452-95 1453-95 1454-95 1455-95 1458-95 1459-95 1462-95 1465-95 1466-95 1469-95 1.890 Part Number 1572-95 1575-95 1576-95 1577-95 1578-95 1581-95 1583-95 1584-95 1595-95 I.234 1. Length Pattern GO7 GO8 GO9 GO10 GO11 GO12 GO13 GO14 GO15 GO16 GO17 GO18 GO19 GO20 GO24 GO25 GO32 GO37 .D.340 1.125 Part Number AVAILABLE IN 25' LENGTHS Part Number 1440-95 1441-95 1442-95 1443-95 1444-95 1445-95 1446-95 1447-95 1448-95 1449-95 1450-95 1444-95 1446-95 1448-95 1449-95 1453-95 1456-95 1459-95 1462-95 I.900 2.730 .500 20' GA26 1.750 .031 1.812 25' GA15 .109 1.875 20' GA16 1.D.656 25' GA14 . 12 .50 2.5 3. 0-932 2 2-1/2-12 .54 NG2 NG3 NG4 1.07 2. MM 0-902 0-903 0-904 1/8 3/16 1/4 5/16-24 3/8-24 7/16-20 .34 59.53 1.22 NG8 NG9 NG15 3.50 1.38 Available Lengths: 300 ft.25 3.0 2.72 29.12 NG16 5.07 . In.05 19. tubing or wires.50 3. 0-906B.4 0-910 0-912 0-914 5/8 3/4 7/8 7/8-14 1-1/16-12 1-3/16-12 .47 .D. MM (B) I.7 37.2 23.e. Temperature Range: -60˚F to +250˚F Material: Nylon B DIAMETER (inches) FLAT WIDTH (inches) 1776-12 1776-16 1776-20 1.9 0-905 0-906 0-908 5/16 3/8 1/2 1/2-20 9/16-18 3/4-16 .25 1776-22 1776-24 1776-28 2.13 0. i.50 5.75 1776-32 1776-38 1776-40 3.4 Buna-N O-Rings For Straight Thread Boss Couplings and Adapters B A Durometer: Shore Hardness A90 46 .93 1.13 1.0 1.0 3.41 .5 11.19 3.9 16.) THREAD SIZE (A) THICKNESS In.76 .5 43. (ref.00 3. 0-916 0-920 0-924 1 1-1/4 1-1/2 1-5/16-12 1-5/8-12 1-7/8-12 .75 4.64 10.0 .30 .17 1. Add "B" to end of part number.75 1.71 1.30 2.35 6.12 3.07 .00 1.0 3.1 7.6 Resistant to gasoline. oil.8 .07 .59 1.0 2.8 2.2 .08 .00 2.8 1.13 1.12 3.92 1.56 2.12 .0 3.8 1.24 .6 8.12 .7 For systems using fire resistant phosphate ester base hydraulic fluid.D.12 2. coils BUNA-N O-RINGS PART NUMBER TUBING O.12 1.09 1. butyl o-rings are required.10 .88 2.07 1.81 2. grease and petroleum base hydraulic fluids.97 0.47 1.5 26.58 1.Cordura® and NylogardTM Protective Sleeving PART NUMBER B Applications: Ideal for abrasion protection or bundling small hose assemblies. 07 1. oil.5 21.07 1.14 3.6 (B) I.e.6 50.8 1.40 .6 3.8 24.07 .07 .07 .14 .14 .0 37.86 .07 1.8 1.BUNA-N O-RINGS Buna-N O-Rings For O-Ring Face Seals B PART NUMBER THREAD SIZE O-104 O-106 O-108 9/16-18 11/16-16 13/16-16 O-110 O-112 O-116 DASH SIZE (A) THICKNESS In.6 A Resistant to gasoline.78 .8 1. i. Add "B" to end of part number.8 PART NUMBER FLANGE SIZE 08PA-77 10PA-77 12PA-77 16PA-77 20PA-77 24PA-77 32PA-77 -08 -10 -12 -16 -20 -24 -32 A Resistant to gasoline.98 1.8 .2 12.14 . 0-906B.07 .8 . grease and petroleum base hydraulic fluids.6 19.e.9 33.48 1. butyl o-rings are required.49 29. In.96 15.34 .6 3. Add "B" to end of part number. Code 62 and Cat Style Flanges B DASH SIZE -201 -212 -214 -219 -222 -225 -228 (A) THICKNESS In.8 24.4 1-14 1-3/16-12 1-7/16-12 -016 -018 -021 .D. For systems using fire resistant phosphate ester base hydraulic fluid.07 .14 .14 .8 1. MM (B) I.6 10.3 56. 0-906B.4 O-120 O-124 1-11/16-12 2-12 -025 -029 .D.98 2. In.23 18. oil. MM . For systems using fire resistant phosphate ester base hydraulic fluid.8 1. butyl o-rings are required.61 . i.14 .8 1.73 .18 1.6 3. grease and petroleum base hydraulic fluids.30 1. Durometer: Shore Hardness A90 47 . MM . MM -011 -012 -014 .6 3.6 3.9 37. Durometer: Shore Hardness A90 Buna-N O-Rings For Flange O-Ring Seals Code 61.49 8.6 3. e.30 6.5 1. 0-906B. i. PART NUMBER THREAD SIZE (A) THICKNESS In.26 .31 . butyl o-rings are required.5 1.79 1.07 .64 . MM 06RO-77 08RO-77 10RO-77 12RO-77 15RO-77 18RO-77 22RO-77 28RO-77 M12 M14 M16 M18 M22 M26 M30 M36 .47 .5 2. oil.3 25.07 .0 26.06 . 08RO-77 10RO-77 12RO-77 14RO-77 16RO-77 20RO-77 25RO-77 30RO-77 38RO-77 M16 M18 M20 M22 M24 M30 M36 M42 M52 X X X X X X X X X 1. oil.0 2.0 12.5 8.5 2.5 1. i.D.00 1.0 2.0 10.D.D.0 2.10 1. butyl o-rings are required.59 .80 1. MM 06 08 10 12 15 18 22 28 For systems using fire resistant phosphate ester base hydraulic fluid.0 2.4 2.BUNA-N O-RINGS Buna-N O-Rings For DIN Metric.8 1.30 . i.39 . Add "B" to end of part number.09 .8 1.5 8.68 1.0 (B) I.0 (A) THICKNESS In.06 . Durometer: Shore Hardness A90 48 PART NUMBER THREAD SIZE O-6BL O-8BL O-10BL O-12BL 5/8-18 3/4-16 7/8-16 1-1/16-14 (A) THICKNESS In.06 .39 .0 2. oil. In.e.3 20.43 .08 .8 1.5 .D.0 12.5 1.08 .4 33. For systems using fire resistant phosphate ester base hydraulic fluid. In.0 20.D. butyl o-rings are required.08 .7 10.06 .0 2.5 1.18 .0 2. MM . Heavy Series B A Resistant to gasoline.07 . In. Light Series B A Resistant to gasoline.5 1.09 .0 15.0 11.5 1.0 TUBE O.0 TUBE O.0 17.43 . MM .0 1.5 1.5 1. MM (B) I. Add "B" to end of part number.08 .5 1.e.55 .8 14.0 10.5 1.0 16. Add "B" to end of part number.4 2.5 6.08 PART NUMBER THREAD SIZE X X X X X X X X 1. 0-906B.08 .8 7.09 .4 2.5 (B) I.0 2.5 2. MM . MM . For systems using fire resistant phosphate ester base hydraulic fluid. Durometer: Shore Hardness A90 Buna-N O-Rings For DIN Metric. MM 08 10 12 14 16 20 25 30 38 Durometer: Shore Hardness A90 Buna-N O-Rings For Tube O-Ring A/C B A Resistant to gasoline.07 .5 2. grease and petroleum base hydraulic fluids.5 1.06 .5 1.31 .06 .47 . 0-906B.0 2.02 4. grease and petroleum base hydraulic fluids. grease and petroleum base hydraulic fluids.26 .06 .5 1. • Color-coded die selection guide is printed right on the machine for easy. user-friendly controls take the guess-work out of crimping.520 Red . pc. No more searching for a small.D. in fact.730 Silver (optional) 1. pc. pc. MORE TROUBLE-FREE CRIMPING ADVANCED CRIMPING CONTROL SYSTEM • Crimp 1&2 wire hose through 1-1/2" I.D. pc. pc.830 Blue (optional) 1. • Assure faster set-up and operation. pc.830 Blue 1.320 (optional) .100 Green 1. pc. 115V 60 cycle single phase 1 HP NP60N: Crimper with no dies. pc.320 Black 1.670 Yellow (optional) . • Convenient built-in die storage shelves eliminate lost dies. pc.600 White (optional) 1.Field Support Equipment (Crimpers) NP 60 IMPROVED–SUPERIOR DESIGN FOR FASTER. 115V 60 cycle single phase 1 HP NP60G: Complete crimper with 6 sets of dies (2 piece die set). pc. Die Die Die Die Die Die Die Die Die Die Die Die Die - Diameter .670 Yellow . • More accurate control of crimp diameter produces more reliable coupling retention. pc.520 Red (optional) .350 Orange (optional) .350 Orange (optional) .380 (optional) EN88-024-01 EN88-024-02 EN88-024-03 EN88-024-04 EN88-024-05 EN88-024-06 EN88-024-07 EN88-024-08 EN88-024-09 EN88-024-10 1 1 1 1 1 1 1 1 1 1 pc. • Located at eye level for maximum convenience.D. pc.500 Brown (optional) 1. pc. MARKET COMPATIBLE CRIMPING SYSTEMS NP60: Complete crimper with 6 sets of dies (2 piece die set). • The cone base has been opened up to accept step size couplings.850 White (optional) 1.850 Triple Bubble (White) (optional) 49 . pc. grease-covered stamped number. Pin height prevents pusher plate from accidentally ending up on top of the pins. mistake-free die selection. 4 spiral hose with optional dies).950 White (optional) EN92-163-1 EN92-163-2 BL Die BL Die - . & 4 spiral hose through 3/4" I.920 Violet (optional) .730 Silver . pc.820 Purple (optional) . (example: BW20-24PA90) • Entire retainer ring is color-coded to speed die selection and set-up.100 Green (optional) 1. pc. • Back plate. with two 3/8" diameter extension pins. 115V 60 cycle single phase 1 HP NP60A: Complete crimper with 6 sets of dies (1 piece die set). pc. Die Sets EN82-008-01 EN82-008-02 EN82-008-03 EN82-008-04 EN82-008-05 EN82-008-06 EN82-008-07 EN84-109-5 EN84-109-1 EN84-109-3 EN84-109-2 EN89-060-02 EN89-060-03 2 2 2 2 2 2 2 2 2 2 2 2 2 pc.320 Black (optional) 1. pc. it's one of the industries fastest! • Simplified. centrally locates the pusher plate. pc.500 Brown (optional) 1. pc.580 Triple Bubble (White) (optional) . New crimp-stop: now it's easier to set your crimp lengths for production and normal crimping. • Eliminates the need for additional tooling purchases as new hoses and fittings become available. pc. 230V 50 cycle single phase 1 HP MORE ADDED VALUE FEATURES New flexible arm light designed to brighten up the crimping area. (or up to 1-1/4" I. Die Die Die Die Die Die Die Die Die Die - . No special skills needed to assure "right-on settings". MORE TROUBLEFREE CRIMPING ADVANCED CRIMPING CONTROL SYSTEM TO 2" I. 110 Volt. 2HP Power Source(s): 2HP. 20 Ampere (20 amp power required to crimp 1-1/2" and 2" hose) 60 ton cylinder with 6 inch stroke (pump included) Dimensions: 43" wide x 35" deep x 38" high Weight: 514 lbs. • An attached light for better visibility.670 . • Easy to use crimp control settings. 6 spiral.D.D.100 1. • Entire retainer ring is color-coded to speed die selection and set-up. Dies). Dies).800 . 20 amp.830 1. Standard Die Sets EN82-008-02 (Red) EN82-008-03 (Yellow) EN82-008-04 (Blue) EN82-008-05 (Green) EN82-008-06 (Black) EN82-008-07 (Silver) EN84-109-01 (Brown) EN84-109-02 (Purple) EN91-063-04 (Pink) EN94-063-06 (White) Diameter . • Convenient built-in die storage shelves eliminate lost dies. and 1-1/2" I.300 2. 4 spiral. 115v 60 cycle 60Hz. 60Hz. • A book stand to hold crimp specification booklet.520 .500 1.920 2. 230v 50Hz.730 1. • Color coded pusher plates: — Blue for small diameter — Yellow for large diameter • Cone base insertion plate for small crimp sizes. 2HP WB60G Crimper with 10 sets of Dies (2 pc. 50 WB60 Crimper with 10 sets of Dies (2 pc.Field Support Equipment (Crimpers) WB60 SUPERIOR DESIGN FOR FASTER. • A crimp stop for more accurate crimp lengths. single phase.D.320 1. • Crimp hose sizes up to 2" I. creating a more accurate control of crimp diameter for more reliable coupling retention. POWER SOURCES • Entire retainer ring is color coded to each die by size to speed die selection and set-up and eliminate searching for a small. lightweight. pc.100 Green 1.320 Black (optional) 1.D.850 Triple Bubble (White) (optional) 51 . grease-covered number.950 White (optional) EN92-163-1 EN92-163-2 BL Die BL Die - EC30-23 Air Pump EC30-24 Electro-Hydraulic Pump .500 Brown (optional) 1. • No rubber or molded urethane separators to fatigue and fall apart.920 Violet (optional) . pc. and it doesn't require electricity. Mount it on your service truck or cart and take it where the trouble is.320 (optional) .600 White (optional) 1. pc. • Advanced spring-loaded die finger design won't stick—assures easier removal of finished assemblies.520 Red .580 Triple Bubble (White) (optional) .380 (optional) EN88-024-01 EN88-024-02 EN88-024-03 EN88-024-04 EN88-024-05 EN88-024-06 EN88-024-07 EN88-024-08 EN88-024-09 EN88-024-10 1 1 1 1 1 1 1 1 1 1 pc. pc. pc.320 Black 1. Die Die Die Die Die Die Die Die Die Die Die Die Die - Diameter .730 Silver . pc.830 Blue 1. pc.Field Support Equipment (Crimpers) EC 30 TRULY PORTABLE WITH TIME-SAVING ADJUSTABLE CRIMP DIAMETERS • Compact.350 Orange (optional) . pc.830 Blue (optional) 1.500 Brown (optional) 1. pc. pc.520 Red (optional) . pc.D. pc. pc. pc. pc. pc. Assures more uniform crimp diameter by holding dies on an equal plane from start to finish.350 Orange (optional) . including 2-wire through 1-1/4" I. pc.850 White (optional) 1. • All steel dies for longer life.820 Purple (optional) .100 Green (optional) 1.670 Yellow . You order just the dies you need. pc. pc. • One pusher plate or spacer ring serves all eight die sets to reduce potential errors (competitive machines confuse you with as many as five).730 Silver (optional) 1. • Eight sets of optional dies handle all your crimping needs.670 Yellow (optional) . Die Die Die Die Die Die Die Die Die Die - . • Three power sources: 2 stage hand pump. pc. pc. and 4-spiral through 1" I. Die Sets EN82-008-01 EN82-008-02 EN82-008-03 EN82-008-04 EN82-008-05 EN82-008-06 EN82-008-07 EN84-109-5 EN84-109-1 EN84-109-3 EN84-109-2 EN89-060-02 EN89-060-03 2 2 2 2 2 2 2 2 2 2 2 2 2 pc. shop air pump and electric pump. EC30-22 Two Stage Hand Pump • Aluminum die retainer ring eliminates lost die fingers. • Adjustable depth stop makes the set-up time faster.200 PSI 420 cubic in.830 1. Pump NP100A – 25 Power Source Options: Max.500 1./min. 60Hz.000 PSI 220 Volt.000 PSI 420 cubic in. Oil Type: Power Team Hydraulic Oil Dimensions: 13" high x 15" wide x 36" deep Control Box dimensions: 20" wide x 16" high x 12" deep Weight: 680 lbs. 40 amp @ 1725 RPM Weight: 506 lbs.@ 10. 34 amp 240 Volts @ 1725 RPM Weight: 506 lbs. • Die storage rack included.670 .. 10HP. @ 10. • Best Performance — Best Buy Pump NP100A – 22 Power Source Options: Max. 60Hz. @ 1. • The NP10 will crimp up to 700 cycles per hour.000 PSI 3 phase. 10HP. • Adjustable die closures allow each die to crimp a wide range of hoses.140 2.000 PSI Delivery: 1050 cubic in..920 2.320 1. 1 phase. @ 10. Options: Die Sets Diameter EN85-050-02 (Red) EN85-050-03 (Yellow) EN85-050-04 (Blue) EN85-050-05 (Green) EN85-050-06 (Black) EN85-050-07 (Brown) EN85-050-08 (Clear) EN85-050-09 (Purple) EN85-050-10 (Rose) EN85-050-11 (Gold) EN85-050-12 (white) .500 2.730 1. no need to double crimp 2" 6 spiral high pressure hoses.Field Support Equipment (Crimpers) NP100A THE MOST ECONOMICAL PRODUCTION CRIMPER ON THE MARKET TODAY • State-of-the-art electronic digital controls take the guesswork out of crimping./min./min.100 1.520 . pressure: 10. pressure: 10./min.800 NP100 – 20 Foot Pedal An option that permits hands-free operation of the NP100 model crimper. 52 . • Delivers 100 tons of crimping force.000 PSI Delivery: 1050 cubic in. • Two piece drop-in dies allow changeovers in a matter of seconds. • Color-coded die rings make die selection easy and helps prevent mistakes. • Produces a full range of assemblies. • Steel construction eliminates broken and chipped die fingers. improved coupling retention. * Metal die retainer ring eliminates lost die fingers. • Versatile. and up to 1 1/2" six spiral hose. • Micro-switch control provides high level accuracy.Field Support Equipment (Crimpers) EZ 204A Production Speed. Custom Quality. Assures more uniform crimp diameter by holding dies on a equal plane from start to finish of the crimp cycle. Superior Die Set Design Improves Performance • Adjustable crimp diameter die closures provide accurate dimension control. no more searching for small. • Entire retainer ring is color-coded to speed die selection and set-up. • No rubber or molded urethane die finger separators to fatigue and fall apart .metal die retainer rings last the lifetime of your crimper. and takes the guess work out of crimp lengths. 3/16" to 2" wire braid and four spiral. reliable high speed performance. • Slide scale adjustment and drop-in dies provide quick and easy set-ups. • Spring-Loaded die fingers won't stick . • Delivers 50 tons of crimping force through any of ten standard die sets.assure easier removal of finished assemblies. Trouble Free Crimping. the E-Z Crimp 204A crimper combines easy operation with production capabilities. reliability and blow-off prevention. grease-covered stamped number 53 . 230/460 volt. SE150. 1 phase. It will cleanly cut single or double wire braid reinforced hose up to 1-1/4" I. 3 HP. 60 cycles.D. 3 phase. 60 cycle circuits. SE160.D. 3 HP. as well as thermoplastic hoses. as well as thermoplastic hoses. may be skived with this unit. as well as thermoplastic hoses. 60 cycles. 54 .Tools & Accessories SE135 Hose Cut-Off Saw New bench mounted multiple gang hose cutter designed to cut thermoplastic and textile braid hoses up through 1" I. The 1 HP motor is usable in 115/230 volt. 230 volt. 3 HP.D.D. 60 cycles. 215 lbs.D. 214 lbs. 215 lbs. 3 HP. SE136: Replacement Blade SE140 Hose Cut-Off Saw The ideal light medium duty hose cut-off saw. 215 lbs. Overall dimensions: 22" x 42" x 24" Specifications: SE145. all hoses up through 2" I. 3 phase. Overall dimensions: 13" x 24" x 17" Weight: 113 lbs. 60 cycles. The 3 HP motor is available in single or three phase. Overall dimensions: Specifications: SE155. The 3 HP motor is available in single or three phase. Single phase. single phase. Weight: 7 lbs. SE155 and SE160 Heavy Duty Hose Cut-Off Saw Skiver This saw will cleanly cut single or double wire braid and spiral reinforced hoses up to 2" I. 230/460 volt. SE145 and SE150 Heavy Duty Hose Cut-Off Saw This saw will cleanly cut single or double wire braid and spiral reinforced hoses up to 2" I. In addition. 230 volt. SE155 & SE160 SE175 and SE180 Saw Blade Standard beveled edge blade made from high speed steel. 60 Hz motor Overall dimensions: 13"W x 28"L x 28"H Weight: 150 lbs. 220 volt.Tools & Accessories SE200 and SE 210 Hose Cut-Off Saw Rugged hose cut-off saw that will handle the smallest to the 2" heavy 6 spiral hose easily and reliably. 10" diameter x 3/4" arbor for SE150. 10" diameter x 3/4" arbor for SE145. 2 HP. SE150. 7" diameter x 5/8" arbor for SE140 SE180. Double chain. 3 phase. Single phase. 60 Hz motor SE210. Can be resharpened many times. These blades can be resharpened many times and can be reversed for twice the life. 3 HP. and SE160 SE190 Skiving Brush Replacement skiving brush for SE155 and SE160 for accurate skiving. 55 . SE201: Blade (abrasive) – 11" diameter SE165 and SE170 Saw Blade Scalloped construction for better heat dissipation and a cleaner cut. 7" diameter x 5/8" arbor for SE140 SE170. 220/460 volt. Ideally suited for production cutting where efficiency of operation and speed are essential. Specifications: SE175. hold down L-vise with hand lock Specifications: SE200. Specifications: SE165. which allows the user to roll out the complete drawer for easy lookup and access to all hydraulic couplings. The top 4 drawers contain 40 3-1/2" wide bins (10 per drawer) with one insert available per bin. Can be used on hose through 2" I. This gives you the flexibility of choosing your own set up and paying only for the option you want.Tools & Accessories SE195 Skiving Tool Easy to use. This is reflected in our price sheet. 201890 201891 201892 201893 201896 201897 56 Description Custom 6-Drawer Hydraulic Cabinet (Bins Included) 3 1/2" Wide Plastic Bin (10 per carton) 7" Wide Plastic Bin (5 per carton) Plastic Inserts for Plastic Hydraulic Bins (needed) 50 pak Stationary Leg Set for Hydraulic Cabinet Heavy Duty Leg Set for Hydraulic Cabinet . The optional leg sets. Our new hydraulic cabinet consists of a blue custom six-drawer cabinet with our Dayco logo printed on both sides in white. is happy to announce the release of our new hydraulic fitting storage cabinet. Each drawer is on rollers. NEW! Dayco Hydraulic Bin Cabinets! Dayco Products. accurate. skiving tool designed especially for spiral wire hose. Inc. The bottom two rows contain 10 7" wide bins (5 per drawer) with one insert available per bin. must be ordered separately from the cabinet. SSK2 Internal Skiving Tool Internal skiving tool for NH32 hose. both stationary and caster. The part number for the cabinet and the 50 bins that are included is 201890. Note: New Hydraulic Bin Label stickers are being printed and should be available in November. Part No.D. hose fitting components and crimp equipment specifically engineered. Dayco hose. HOSE AND EQUIPMENT. Dayco's product are part of an engineered system which must be assembled and used in accordance with Dayco instructions and limitations. Dayco's limited warranty shall apply only if the customer uses hose. IN CONFORMANCE WITH DAYCO PROCESS SPECIFICATIONS FOR EACH SPECIFIC HOSE ASSEMBLY. IN CONFORMANCE WITH DAYCO PROCESS SPECIFICATIONS FOR EACH SPECIFIC HOSE ASSEMBLY. serious injury or death. Failure to follow Dayco instructions and limitations could lead to premature hose failures resulting in property damage. Failure to follow Dayco instructions and limitations could lead to premature hose failures resulting in property damage. Dayco's limited warranty shall apply only if the customer uses hose. DAYCO DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY CRIMPED HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE DAYCO HOSE FITTINGS. fittings. DO NOT USE A DAYCO CRIMPING MACHINE WITHOUT DIES! DO NOT USE A DAYCO CRIMPING MACHINE WITHOUT DIES! . serious injury or death. DAYCO DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY CRIMPED HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE DAYCO HOSE FITTINGS. HOSE AND EQUIPMENT. designed and produced to Dayco process specifications. hose fitting components and crimp equipment specifically engineered. designed and produced to Dayco process specifications. WARNING  WARNING Dayco's product are part of an engineered system which must be assembled and used in accordance with Dayco instructions and limitations. couplings and crimping machines are designed as an effective and reliable assembly system and the use of other than Dayco's product may produce hose assemblies that will not meet rated performance. Dayco hose. couplings and crimping machines are designed as an effective and reliable assembly system and the use of other than Dayco's product may produce hose assemblies that will not meet rated performance. fittings.