DATASTAGE ROUTINES ________________________________________ BL: BOT v2.3.0 Returns BLANK if passed value is NOT NULL or BLANK, after trimming spaces DataIn = "":Trim(Arg1) If IsNull(DataIn) or DataIn = "" Then Ans = "" End Else Ans = DataIn End CheckFileRecords: Function CheckFileRecords(Arg1,Arg2) vParamFile = Arg1 : "/" : Arg2 vCountVal = 0 OpenSeq vParamFile To FileVar Else Call DSLogWarn("Cannot open ":vParamFile , "Cannot Open ParamFile") End Loop ReadSeq Dummy From FileVar Else Exit ;* at end-of-file vCountVal = vCountVal + 1 Repeat CloseSeq FileVar Ans=vCountVal Return (vCountVal) CheckFileSizes: DIR = "/interface/dashboard/dashbd_dev_dk_int/Source/" FNAME = "GLEISND_OC_02_20040607_12455700.csv" *CMD = "ll -tr ":DIR:"|grep ":FNAME CMD = "cmp -s ":DIR:"|grep ":FNAME Call DSExecute("UNIX", CMD, Output, SystemReturnCode) Ans = Output CheckIdocsSent: Checks If Idoc delivery job actually sent any Idocs to SAP. This routine will atempt to read the DataStage Director log for the job name specified as an argument. If the job has a fatal error with "No link file", the routine will copy the IDOC link file(s) into the interface error folder. In case the fatal error above is not found the routine aborts the job. A simple log of which runs produce error link file is maintained in the module's log directory. $INCLUDE DSINCLUDE JOBCONTROL.H vRoutineName = "CheckIdocsSent" Ans = "Ok" If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Move = 'move ' End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' Move = 'mv -f ' End vJobHandle = DSAttachJob(JobName, DSJ.ERRFATAL) vLastRunStart = DSGetJobInfo(vJobHandle, DSJ.JOBSTARTTIMESTAMP) vLastRunEnd = DSGetJobInfo(vJobHandle, DSJ.JOBLASTTIMESTAMP) * Get the delivery log for the last run vLogSummary = DSGetLogSummary ( vJobHandle, DSJ.LOGANY, vLastRunStart, vLastRunEnd, 500) vLogSummary = Change(vLogSummary,@FM,'') * Manipulate vLogSummary within routine to return status PosOfStr = Index(Downcase(vLogSummary),"sent",1) vLogMsg = vLogSummary[PosOfStr,20] * Now work out Status If PosOfStr = 0 then Status = 'NOT SENT' vLogMsg = '' end else Status = 'SENT' vLogMsg = vLogSummary[PosOfStr,20] end Ans = Status vErr = DSDetachJob(vJobHandle) Call DSLogInfo("Job " : JobName : " Detached" , vRoutineName) ***** Make a log entry to keep track of how often the pack doesn't work ******** vMessageToWrite = Fmt(Module_Run_Parm, "12' 'L") : Fmt(Status, "10' 'L") : " - " : vLogMsg vIdocLogFilePath = Interface_Root_Path_Parm: OsDelim : "logs" : OsDelim : "IdocSentLog.log" ******** Open the log file OPENSEQ vIdocLogFilePath TO vIdocLogFile Then Call DSLogInfo("IdocSentLog Open" , vRoutineName) ** Label to return to if file is created FileCreated: *** Write the log entry vIsLastRecord = @Null Loop Until vIsLastRecord Do READSEQ vRecord From vIdocLogFile Then *Call DSLogInfo("Record Read - " : vRecord , vRoutineName) End Else *Call DSLogInfo("End of file reached " , vRoutineName) vIsLastRecord = @True End Repeat WRITESEQ vMessageToWrite To vIdocLogFile Then Call DSLogInfo("Log entry created : " : vMessageToWrite, vRoutineName) End Else Call DSLogFatal("Cannot write to " : vIdocLogFilePath, vRoutineName) End End Else Call DSLogInfo("Could not open file - " : vIdocLogFilePath , vRoutineName) Call DSLogInfo("Creating new file - " : vIdocLogFilePath , vRoutineName) CREATE vIdocLogFile ELSE Call DSLogFatal("Could not create file - " : vIdocLogFilePath , vRoutineName) WEOFSEQ vIdocLogFile WRITESEQ Fmt("Module Run", "12' 'L") : Fmt("Status", "10' 'L") : " " : "Message" To vIdocLogFile Else ABORT Call DSLogInfo("Log file created : " : vIdocLogFilePath , vRoutineName) GOTO FileCreated End **** Abort the delivery sequence and write error message to the log.lnk " : vIdocTgtLinkPath : OsDelim Call DSExecute(OsType. 4.* set this to non-zero to stop the stage/job **If Clear_Mapping_Table_Parm = 'Y' Then EXECUTE "CLEARFILE Vendor_Map_HF. vRoutineName) End Else LogMessMoveOK = "Link files were moved to " : vIdocTgtLinkPath Call DSLogInfo(LogMessMoveOK. ************ If Status = 'NOT SENT' Then Call DSLogInfo("No Idocs were actually sent to SAP . vRoutineName) LogMessMoveFail = 'The move command (':OsCmd:') returned status ':OsStatus:':':@FM:OsOutput Call DSLogWarn(LogMessMoveFail. OsDelim. vRoutineName) End ClearMappingTable: SUBROUTINE ClearMappingTable (Clear_Mapping_Table.*. 1) vIdocTgtLinkPath = Interface_Root_Path_Parm: OsDelim : "error" OsCmd = Move : " " : vIdocSrcLinkPath : OsDelim : JobName : ". OsDelim. vRoutineName) LogMessRetry = "Job " : JobName : " is ready to be relaunched.Trying to clean up IDOC Link Files: "." Call DSLogInfo(LogMessRetry. 4) : OsDelim : "dsproject" : OsDelim : Field(Interface_Root_Path_Parm. Errorcode) Error Code = 0 . OsCmd. 1. ".GEN" **End Else **End ComaDotRmv: DataIn = "":(Arg1) If IsNull(DataIn) or DataIn = "" Then Ans = "" End Else DataIn = Ereplace(DataIn. vRoutineName) vIdocSrcLinkPath = Field(Interface_Root_Path_Parm. OsOutput. vRoutineName) End End Else Call DSLogInfo("Delivery job log indicates run OK ". OsStatus) If OsStatus <> 0 Then Call DSLogWarn("Error when trying to move link file(s)".". vRoutineName) Call DSLogFatal("Cleaning up of IDOC Link Files failed". "") . @FM.' If SourceFileMask = '' Or SourceDir = TargetDir Then Return(0) ! If SourceDir # '.DSMkDir(MkStatus.Flags) RoutineName = "CopyFiles" If SourceDir = '' Then SourceDir = '.TargetFileMask)) TargetFileList = Splice(Reuse(TargetDir).OsDelim.".SourceDir.DSMkDir(MkStatus.TargetFileMask. "") Ans = DataIn End CopyFiles: Move files from one directory to another Function CopyofFiles(sourceDir.''.' Then ! OpenPath TargetDir To Fv Else ! Call DSU. ".SourceFileMask.'777') ! End ! End If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Copy = 'copy ' Flag = Flags End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' Copy = 'cp -f ' End If Flags <> "" then Flag = NonOsDelim:Flags Else Flag = "" SourceWorkFiles = Trims(Convert('.''.SourceWorkFiles) Convert NonOsDelim To OsDelim In SourceFileList TargetWorkFiles = Trims(Convert('.OsDelim.'.'.TargetWorkFiles) .DataIn = Ereplace(DataIn.' Then ! OpenPath SourceDir To Fv Else ! Call DSU.TargetDir.' If TargetDir = '' Then TargetDir = '.@FM.'777') ! End ! End ! If TargetDir # '.TargetDir.SourceFileMask)) SourceFileList = Splice(Reuse(SourceDir). Convert NonOsDelim To OsDelim In TargetFileList OsCmd = Copy:' ' : Flag : " " :SourceFileList:' ':TargetFileList Call DSLogInfo('Copying ': SourceFileList: ' to ':TargetFileList. then the non-key field from the file is returned * If not found..OsOutput. "***Not Found***" is returned * * The routine requires the UniVerse file named to have been created previously * .ME.Column_Value) $INCLUDE DSINCLUDE JOBCONTROL.JOBNAME) vStageName=DSGetStageInfo(DSJ.RoutineName) Call DSExecute(OsType.ME.STAGENAME) vCommonName=CheckSum(vJobName) : CheckSum(vStageName) : CheckSum(Column_Name) Common /vCommonName/ LastValue vLastValue=LastValue vNewValue=Column_Value If vNewValue<>vLastValue Then Ans=1 Else Ans=0 LastValue=vNewValue CopyOfZSTPKeyLookup Check if key passed exists in file passed Arg1: Hash file to look in Arg2: Key to look for Arg3: Number of file to use "1" or "2" * Routine to look to see if the key passed exists in the file passed * If so. DSJ.'.H vJobName=DSGetJobInfo(DSJ. RoutineName) End Else Call DSLogInfo('Files moved. DSJ..'DSMoveFiles') End Ans = OsStatus CopyofComareROWS: Function copyofcompareRows(Column_Name. DSJ.ME.OsCmd.OsStatus) If OsStatus Then Call DSLogWarn('The Copy command (':OsCmd:') returned status ':OsStatus:':':@FM:OsOutput. RoutineName) Ans = -1 End End If NOT(Init2) And Arg3 = "2" Then * Not initialised. Therefore open file Init1 = 1 Open Arg1 TO SeqFile1 Then Clearfile SeqFile1 Else Call DSLogInfo("Open failed 1".RoutineName) Common /ZSTPkeylookup/ Init1. SeqFile2. if not found. Init2. Arg2 Else RetVal = "***Not Found***" End Else Read RetVal From SeqFile2. return "***Not Found***" If Arg3 = "1" Then Read RetVal From SeqFile1.H . msgtext Ans = 0 If NOT(Init1) And Arg3 = "1" Then * Not initialised.RoutineName) Ans = -1 End End * Read the file to get the data for the key passed.H EQUATE RoutineName TO 'ZSTPKeyLookup' * Call DSLogInfo("Routine started". RetVal.RoutineName) msgtext = "Cannot open ZSTP creation control file ":Arg1 Call DSLogFatal(msgtext.RoutineName) msgtext = "Cannot open ZSTP creation control file ":Arg1 Call DSLogFatal(msgtext. Therefore open file Init2 = 1 Open Arg1 TO SeqFile2 Then Clearfile SeqFile2 Else Call DSLogInfo("Open failed 2". SeqFile1.$INCLUDE DSINCLUDE JOBCONTROL. Arg2 Else RetVal = "***Not Found***" End Ans = RetVal Create12CharTS: Function Create12CharTS(JobName) $INCLUDE DSINCLUDE JOBCONTROL. vJobHandle = DSAttachJob(JobName, DSJ.ERRFATAL) vJobStartTime = DSGetJobInfo(vJobHandle, DSJ.JOBSTARTTIMESTAMP) vDate = Trim(vJobStartTime, "-","A") vDate = Trim(vDate, ":","A") vDate = Trim(vDate, " ", "A") vDate = vDate[1,12] Ans=vDate CreateEmptyFile: Function CreateEmptyFile(Arg1,Arg2) *Create Empty File vParamFile = Arg1 : "/" : Arg2 OpenSeq vParamFile To FileVar Else Call DSLogWarn("Cannot open ":vParamFile , "Cannot Open ParamFile") End WeofSeq FileVar CloseSeq FileVar Ans="1" Datetrans: DateVal Function Datetrans(DateVal) Function DeleteFiles(SourceDir,FileMask,Flags) * Function ReverseDate(DateVal) * Date mat be in the form of DD.MM.YY i.e. 01.10.03 * convert to YYYYMMDD SAP format Ans = "20" : DateVal[7,2] : DateVal[4,2] : DateVal[1,2] DeleteFiles: RoutineName = "DeleteFiles" If SourceDir = '' Then SourceDir = '.' If FileMask = '' SourceDir = '' Then Return(0) If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Delete = 'del ' End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' Delete = 'rm ' : Flags : ' ' End WorkFiles = Trims(Convert(',',@FM,FileMask)) FileList = Splice(Reuse(SourceDir),OsDelim,WorkFiles) Convert NonOsDelim To OsDelim In FileList OsCmd = Delete :' ' : FileList Call DSLogInfo('Deleting ':FileList,RoutineName) Call DSExecute(OsType,OsCmd,OsOutput,OsStatus) If OsStatus Then Residx= Index(OsOutput,"non-existent",1) if Index(OsOutput,"non-existent",1) = 0 then Call DSLogInfo('The Delete command (':Residx:OsCmd:') returned status ':OsStatus:':':@FM:OsOutput,RoutineName) End Else Call DSLogInfo('No Files matched Wild Card - Delete was not required...',RoutineName) OsStatus = 0 End End Else Call DSLogInfo('Files deleted...',RoutineName) End Ans = OsStatus DisconnectNetworkDrive: Map a Network Drive on a Windows Server: Function Disconnectnetworkdrive(Drive_Letter) RoutineName = "MapNetworkDrive" If Drive_Letter = '' Then Return(0) OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Copy = 'copy ' OsCmd = 'net use ' : Drive_Letter : ": /delete" Call DSLogInfo('Disconnecting Network Drive: ' : OsCmd,RoutineName) Call DSExecute(OsType,OsCmd,OsOutput,OsStatus) If OsStatus Then Call DSLogWarn('The Copy command (':OsCmd:') returned status ':OsStatus:':':@FM:OsOutput, RoutineName) End Else Call DSLogInfo('Drive: ' : Drive_Letter : 'Disconnected ',RoutineName) End Ans = OsStatus DosCmd: Move files from one directory to another: Function DosCmd(Cmd) RoutineName = "DosCmd" If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' End OsCmd = Cmd Call DSLogInfo("CMD = " : Cmd,RoutineName) Call DSExecute(OsType,OsCmd,OsOutput,OsStatus) If OsStatus Then Call DSLogWarn('The command (':OsCmd:') returned status ':OsStatus:':':@FM:OsOutput, RoutineName) End Else Call DSLogInfo('The command (':OsCmd:') was successfull ':OsStatus:':':@FM:OsOutput,RoutineName) OsOutput.OsStatus) If OsStatus Then Call DSLogInfo('The move command (':OsCmd:') returned status ':OsStatus:':':@FM:OsOutput.'.'DSMoveFiles') End Else Call DSLogInfo('Files moved." : OsOutput DSMoveFiles: Move files from one directory to another: f SourceDir = '' Then SourceDir = '.' If FileMask = '' Or SourceDir = TargetDir Then Return(0) If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Move = 'move ' End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' Move = 'mv -f ' End WorkFiles = Trims(Convert('.' If TargetDir = '' Then TargetDir = '. W-Warning.FileMask)) FileList = Splice(Reuse(SourceDir)..'.OsDelim..WorkFiles) Convert NonOsDelim To OsDelim In FileList OsCmd = Move:' ' : FileList: ' ':TargetDir Call DSLogInfo('Moving ':FileList: ' to ':TargetDir. E-Error.'DSMoveFiles') Call DSExecute(OsType.OsCmd. F-Fatal ErrorLogInd: An Indicator to indicate of errors should be logged (Note this is not yet .'DSMoveFiles') End Ans = OsStatus Routine Name:ErrorMgmtDummy: Value: The Value to Be Mapped FieldName: The Name of the source field that the Value is contained in Format: The name of the Hash file containing the mapping data Default: The Default value to return if value is not found Msg: ny text you want to store against an error SeverityInd: The Error Severity Indicator:
[email protected] Ans = OsStatus : " . ErrorLogInd) * * Executes a lookup against a hashed file using a key * * Input Parameters : Arg1: Value = The Value to be Mapped or checked * Arg2: FieldName = The Name of the field that is either the Target of the Derivation or the sourceField that value is contained in * Arg3: Format = The name of the Hash file containing the mapping data * Arg4: Default = The Default value to return if value is not found * Arg5: Msg = Any text you want stored against an error * Arg6: SeverityInd = An Indicator to the servity Level * Arg7: ErrorLogInd = An Indicator to indicate if errors should be logged * Arg8: HashfileLocation = An Indicator to indicate of errors should be logged (Note this is not yet implemented) * * Return Values: If the Value is not found.Set_Key.Chk_Value.Ticket_Group.FieldName.implemented) HashFileLocation: A Hashfile could be either local to the Module or Generic. FilesOpened Common /TicketCommon/ Ticket_Group.SeverityInd) End RETURN(Ans) FileExists: Move files from one directory to another Function File Exits(Filename) Routine Name = "File Exists" .Ta ble. Enter "G" for Generic "L" for Local * FUNCTION Map(Value. Ticket_Sequence. Set_Key.LogToHashFile' If (Ans = "-1" or Ans = "-2" or UpCase(Ans)= "BLOCKED") and ErrorLogInd = "Y" Then Ret_Code=LogToHashFile(Mod_Run_Num.Format. Generic_Root_Path.Key. return value is: -1.Msg.Text.SeverityInd) Calling 'DSU.Default. Mod_Run_Num DEFFUN LogToHashFile(ModRunNum.FieldNam e. Chk_Hash_File_Name.FieldName.Ticket_Sequence.Set_Key.Ans.Ticket_Sequence. Mod_Root_Path. or the Default value if that is supplied * If Format Table not found.Ticket_Group. return value is: -2 * * * RoutineName = 'Map' Common /HashLookup/ FileHandles(100).Error.Msg.Table. Extension + 1 File_Extension=File_Name[Extension.LengthofExtension] End Else End Ans = File_Extension FindFileSuffix: . 1) If Extension <> 0 Then LengthofExtension = LengthofFileName
[email protected] Found = @TRUE OPENSEQ FileName TO aFile ON ERROR STOP "Cannot open file (":FileName:")" THEN CLOSESEQ aFile END ELSE FileFound = @FALSE .".* file not found END Ans = FileFound FileSize: Returns the size of a file Function FileSize(FileName) RoutineName = "FileSize" FileSize = -99 OPENSEQ FileName TO aFile ON ERROR STOP "Cannot open file (":FileName:")" THEN status FileInfo from aFile else stop FileSize=Field(FileInfo.4) * FileSize=FileInfo CLOSESEQ aFile END ELSE FileSize = -999 END Ans = FileSize FindExtension: FunctionFindExtesion(Arg1) File_Name=Arg1 * Gets rid of the extension part of the filename LengthofFileName = Len(File_Name) Extension = Index(File_Name. ". "_".1) + Len(MyTimestamp) MySuffix = File_Name[TimestampEndPos + 1.5):"_":Field(File_Name.MyLenRead] End Else End * Gets the timestamp."."_". 1) . "_".1 File_Name=File_Name[0. 1) . 6) = 0 Then MyLenRead=Index(File_Name. Len(File_Name)] Ans = MySuffix FindTimeStamp: Function FindTimeStamp(Arg1) File_Name=Arg1 * Gets rid of the extension part of the filename Extension = Index(File_Name. "_". 1) If Extension <> 0 Then MyLenRead=Index(File_Name. Doesn't handle the case where there are suffix types and timestamp only contains 5 digits without "_" inbetween If Index(File_Name.5):"_":Field(File_Name.Len(File_Name)-1] End Else MyTimestamp = Field(File_Name.MyTimestamp. 1) If Extension <> 0 Then MyLenRead=Index(File_Name. "."_".6) End TimestampEndPos = Index(File_Name.". "_". 6) = 0 Then MyLenRead=Index(File_Name. 4) + 1 Timestamp = File_Name[MyLenRead. "."."_".6) End Ans = Timestamp . ". ".".Function FindFileSuffix(Arg1) File_Name=Arg1 * Gets rid of the extension part of the filename Extension = Index(File_Name. 4) + 1 MyTimestamp = File_Name[MyLenRead.MyLenRead] End Else End * Gets the timestamp.1 File_Name=File_Name[0. Doesn't handle the case where there are suffix types and timestamp only contains 5 digits without "_" inbetween If Index(File_Name.Len(File_Name)-1] End Else Timestamp = Field(File_Name."_". 'L') end Ans=vString End FTPFile: Script_Path: he path to where the Unix Script file lives File_Path: The Value to Be Mapped File_Name: The Name of the source field that the Value is contained in IP_Address: The name of the Hash file containing the mapping data User_ID: The Default value to return if value is not found Password: Any text you want to store against an error Target_Path: The target path where the ifle is to saved on the target server .1]='-' Then 1 Else 0 If Arg1='0.vLength-1] vString='-':Trim(vString.formatCharge: Function FormatCharge(Arg1) vCharge=Trim(Arg1. "L") vCharge=vCharge/100 vCharge=FMT(vCharge. '0'."R2") Ans=vCharge formatGCharge: Ans=1 vLength=Len(Arg1) vMinus=If Arg1[1. 0.00' Then Ans=Arg1 End Else If vMinus=1 Then vString=Arg1[2.'L') End else vString=Trim(Arg1. '0'. File_Name.File_Wild_Card.OsCmd.OsCmd.Password.OsStatus) If OsStatus Then Call DSLogInfo('The FTP command (':OsCmd:') returned status ':OsStatus:':':@FM:OsOutput.Target_Path) * * RoutineName = 'FTPmget' OsCmd = Script_Path:"/ftp_Mget.'DSMoveFiles') .. User_ID.* FUNCTION FTPFile(Script_Path.IP_Address..File_Path.Password.Target_Path) * * RoutineName = 'FTPFile' OsCmd = Script_Path : "/ftp_put.sh":" ":File_Path:" ":File_Name:" ":IP_Address:" ":User_ID:" ":Password:" ":Target_Path :" ":Script_Path Call DSLogInfo('Ftp ':File_Name: ' to ' : IP_Address : ' ' :Target_Path.'DSMoveFiles') End Else Call DSLogInfo('Files FTPd.sh" Call DSLogInfo('Ftp ':File_Wild_Card: ' From ' : IP_Address : ' ' :Source_Path : ' to ' :Target_Path.OsStatus) If OsStatus Then Call DSLogInfo('The FTP command (':OsCmd:') returned status ':OsStatus:':':@FM:OsOutput.OsOutput.RoutineName) Call DSExecute("UNIX".'FTPFile') Call DSExecute("UNIX". User_ID.'FTPFile') End Ans = OsStatus RETURN(Ans) FTPmget: * FUNCTION FTPFile(Script_Path.'FTPFile') Call DSLogInfo('Ftp Script = ':Script_Path.OsOutput.Source_Path.sh":" ":Source_Path:" ":File_Wild_Card:" ":IP_Address:" ":User_ID:" ":Password:" ":Target_Path:" ":Script_Path *OsCmd = Script_Path : "/test.IP_Address.': '(':OsCmd:')'. 4] If ISNULL(FKDAT) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : FKDAT [1.4] If ISNULL(VTWEG) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : VTWEG [1.6] If ISNULL(FKARA) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : FKARA [1.10] If ISNULL(MATNR) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : MATNR [1.15] If ISNULL(XBLNR) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : XBLNR [1.16] If ISNULL(VGPOS) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : VGPOS [1.1] If ISNULL(VKORG) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : VKORG [1.10] If ISNULL(KUNRE) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : KUNRE [1.End Else Call DSLogInfo('Files FTPd.': '(':OsCmd:')'.4] If ISNULL(VKAUS) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : VKAUS [1.18] If ISNULL(PSTYV) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : PSTYV [1.4] If ISNULL(AUART) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : AUART [1.8] If ISNULL(KUNAG) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : KUNAG [1.8] If ISNULL(ZAWB) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : ZAWB [1.16] If ISNULL(LGORT) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : LGORT [1.4] If ISNULL(ZOR_DT_PCODE) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : ZOR_DT_PCODE [1.RoutineName) End Ans = OsStatus RETURN(Ans) Concatenate All Input Arguments to Output using TAB character Concatenate All Routine="GBIConcatItem" t = Char(009) If ISNULL(IND) THEN Pattern = "" ELSE Pattern = IND [1.3] If ISNULL(VKBUR) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : .2] If ISNULL(SPART) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : SPART [1..4] If ISNULL(KWMENG) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : KWMENG [1..2] If ISNULL(WERKS) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : WERKS [1. 2] If ISNULL(ZZTAXCD) ZZTAXCD [1.35] If ISNULL(KOSTL) KOSTL[1.4] .3] If ISNULL(ARKTX) ARKTX [1.1] If ISNULL(ZTERM) ZTERM [1.2] If ISNULL(LAND2) LAND2 [1.4] If ISNULL(VKGRP) VKGRP [1.40] If ISNULL(KTGRM) KTGRM [1.3] If ISNULL(ZLSCH) ZLSCH [1.10] If ISNULL(WAERS) WAERS [1.3] If ISNULL(NAME1) NAME1 [1.5] If ISNULL(KUNRG) KUNRG [1.35] If ISNULL(PSTLZ) PSTLZ[1.10] If ISNULL(KUNWE) KUNWE [1.4] If ISNULL(KURSK) KURSK [1.1] If ISNULL(VRKME) VRKME [1.16] If ISNULL(KPOSN) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : KPOSN [1.VKBUR [1.10] Ans = Pattern THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : GBIConcatItem: Concatenate All Input Arguments to Output using TAB character: Routine="GBIConcatItem" t = Char(009) If ISNULL(IND) THEN Pattern = "" ELSE Pattern = IND [1.10] If ISNULL(ORT01) ORT01 [1.6] If ISNULL(KSCHL) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : KSCHL [1.9] If ISNULL(TAXM1) TAXM1 [1.1] If ISNULL(KNUMV) THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : KNUMV [1. ".11] If ISNULL(KWERT) KWERT [1."."'"."") DataIn = Ereplace (DataIn."$B$". All_Row) * * Replaces some special characters when creating the GCMF file * * Input Parameters : Arg1: Switch = Step to change."&". "&apos.1] Ans = Pattern THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t THEN Pattern = Pattern : t ELSE Pattern = Pattern : t : KBETR ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : ELSE Pattern = Pattern : t : KHERK GCMFConvert: Receive GCMF string and change known strings to required values: DataIn = "":Trim(Arg1) If IsNull(DataIn) or DataIn = "" Then Ans = "" End Else DataIn = Ereplace (DataIn.">.">") DataIn = Ereplace (DataIn."'") DataIn = Ereplace (DataIn.". ""."|") Ans = DataIn End GCMFFormating: * * FUNCTION GCMFFormating(Switch. * Arg2: All_Row = Row containing the GCMF Record."&apos.'"') DataIn = Ereplace (DataIn.") ."."<") DataIn = Ereplace (DataIn.13] If ISNULL(WAERS) WAERS [1."") DataIn = Ereplace (DataIn.5] If ISNULL(KAWRT) KAWRT [1. "&.15] If ISNULL(KHERK) [1.") DataInFmt = Ereplace (DataInFmt .""."NULL"."&"."&") DataIn = Ereplace (DataIn. * DataIn=Trim(All_Row) If Switch=1 Then If IsNull(DataIn) or DataIn= "" Then Ans = "$B$" End Else DataInFmt = Ereplace (DataIn .'"'.") DataInFmt = Ereplace (DataInFmt ."|"."<.If ISNULL(KBETR) [1. ">". writing the next value back to file each time. The routine uses a file to store the next available number. and save the usde value in the file. . Routine to get the next sequence number to use for a customer from a file.") DataInFmt = Ereplace (DataInFmt . It reads the number. ">.Ans = DataInFmt End End Else If Switch=2 Then DataInFmt = Ereplace (DataIn . TotCount NextId = Identifier IF UNASSIGNED(OldParam) Then OldParam = NextId TotCount = 0 END IF NextId = OldParam THEN TotCount += 1 END ELSE OldParam = NextId TotCount = 1 END Ans = TotCount GetNextCustomerNumber: Sequence number generator. "<."<". After the Merge of all GCMF segments DataInFmt = Ereplace (DataIn . "|") Ans = DataInFmt End End GeneralCounter: COMMON /Counter/ OldParam. The routine argument is the name associated with the super group that the customer is being created in.") Ans = DataInFmt End Else * Final Replace. then increments and stores the value in common."|". Arg1 Else Call DSLogFatal("Update to customer number allocation control file failed".* Routine to generate the next customer number. The routine argument is the name associated with the sequence. NextVal = NextVal + 1 If Len(NextVal) < 10 then NextVal = Substrings("0000000000". The argument is a string used to * identify the super group for the customer. SeqFile EQUATE RoutineName TO 'GetNextCustomerNumber' If NOT(Initialized) Then * Not initialised.RoutineName) Ans = -1 End Ans = NextVal * Increment the sequence value. It reads the number from the file on each invocation. then increments and stores the value * in common storage. The routine uses a file to store the next available number. a lock on the file prevents concurrent access.10Len(NextVal)):NextVal Writeu NextVal On SeqFile.1. NextVal. * * Declare shared memory storage. This * value is stored in a record named after the supplied argument. * * The routine uses a UniVerse file to store the next number to use. Readu NextVal From SeqFile. Attempt to open the file. The * routine reads the number. and write back to file.RoutineName) Ans = -1 End GetNextErrorTableID: Sequence number generator in a concurrent environment. Initialized = 1 Open "IOC01_SUPER_GRP_CTL_HF" TO SeqFile Else Call DSLogFatal("Cannot open customer number allocation control file". Routine to generate a sequential number. writing the next value back to file each time.RoutineName) Ans = -1 End End * Read the named record from the file. Common /CustSequences/ Initialized. . Arg1 Else Call DSLogFatal("Cannot find super group in customer number allocation control file". Table_Name Else NextVal = 1 End Ans = NextVal NextVal = NextVal + 1 * Increment the sequence value. writing the next value back to file each * time. EXECUTE "CREATE. Initialized = 1 Open "ErrorTableSequences" TO SeqFile Else * Open failed. The * routine always attempts to read the number from the file. The arguments are Mod_Code_Parm and Supplier_ID_Parm which combined form the key for this instance of a sequence GetParameterArray: . The argument is a string used to * identify the sequence. * * Declare shared memory storage. * * NOTE: This routine uses locking to allow multiple processes to access the * same sequence. NextVal. Common /ErrorTableSequences/ Initialized. SeqFile EQUATE RoutineName TO 'GetNextErrorTableID' If NOT(Initialized) Then * Not initialised. It increments and stores the * value in common storage. * This releases the lock. Attempt to open the file. and write back to file. Readu NextVal From SeqFile. Table_Name Else Ans = -1 GetNextModSeqNo: Gets the Next Mod Run Code from an Initialised Sequence This routine gets the next Mod Run Number in a squenced that was initialised.* Routine to generate a sequential number. * * The routine uses a UniVerse file to store the next number to use. Write NextVal On SeqFile. This * value is stored in a record named after the supplied argument. * This obtains the lock (waiting if necessary). so that the * record for the sequence becomes locked. Create the sequence file. Writing back this value frees the lock..FILE ErrorTableSequences 2 1 1" Open "ErrorTableSequences" TO SeqFile Else Ans = -1 End End * Read the named record from the file. <2> = Parameter values) * -----------------------------------------------------------DEFFUN FileFound(A) Calling 'DSU.'='.cValue) END END ELSE Done = @TRUE END Until Done Do Repeat CLOSE hParamFile End Else Call DSLogWarn('Error from ':vParamFile:'. * Add to any parameter array passed as an argument aParam<1.4) IF NOT(vFirstChar = cBlank OR vFirstChar = '#' OR vFirstChar = '*' OR vFirstChar = '"' OR vFirstChar = "'" OR vFirstChar = '.' OR vFirstChar = ':' OR vFirstChar = '[' OR vRemark = 'REM ') THEN vParamCnt += 1 .1) vRemark = LEFT(vLine.3.vParamCnt> = TRIM(FIELD(vLine.cName)) aParam<2.vCurRoutineName) CLOSE hParamFile vFailed = @TRUE Done = @TRUE End Then vLine = TRIM(vLineRaw) vFirstChar = LEFT(vLine.'='. Status = ':STATUS().FileFound' cBlank = '' cName = 1 cValue = 2 vParamFile = Arg1 aParam = cBlank vParamCnt = 0 vCurRoutineName = 'Routine: GetParameterArray' vFailed = @FALSE Done = @FALSE IF vParamFile AND FileFound(vParamFile) Then OPENSEQ vParamFile TO hParamFile Then Loop READSEQ vLineRaw FROM hParamFile ON ERROR Call DSLogWarn('Error from ':vParamFile:'.vCurRoutineName) vFailed = @TRUE End .* GetParameterArray(Arg1) * Decription: Get parameters * Written by: * Notes: * Bag of Tricks Version 2. Status = ':STATUS().0 Release Date 2001-10-01 * Arg1 = Path and Name of Parameter File * * Result = ( <1> = Parameter names.vParamCnt> = FIELD(vLine. if mod(Num(InYear).4)<>0 then OutDt = "28" end if mod(Num(InYear).A2) Calling "*DataStage*DSR_MESSAGE" Equate TransformName To "ConvertMonth" * Check the format of the input value.End Else vFailed = @TRUE End Call DSLogInfo("Values loaded from file: ":vParamFile:@AM:aParam.2) If InMonth < 1 Or InMonth > 12 Then Ans = "" GoTo ExitLastDayMonth End * Generate the required output. vCurRoutineName) If vFailed Then Ans = "ERROR" End Else Ans = aParam End LastDayofMonth: Returns the Last Day of the Month Deffun DSRMessage(A1. If IsNull(Arg1) or (Len(Arg1) < 6) Then Ans = "" GoTo ExitLastDayMonth End InYear = Substrings(Arg1.4) InMonth = Substrings(Arg1.4)=0 then OutDt = "29" end Case InMonth = "3" * Internal date for first day of month. depending on the Action argument.5. OutDt = "31" . Begin Case Case InMonth = "1" * Internal date for first day of month.1. OutDt ="31" Case InMonth = "2" * Internal date for first day of month. Error_Text_2.Check_Value. OutDt ="31" Case InMonth = "12" * Internal date for first day of month. OutDt ="30" Case InMonth = "10" * Internal date for first day of month.Error_Text_1. OutDt ="31" End Case Ans=OutDt:"-":InMonth:"-":InYear ExitLastDayMonth: LogToErrorFile: Logs errors to an error hashed file * FUNCTION LogToErrorFile(Table. Error_Text_3. OutDt ="31" Case InMonth = "6" * Internal date for first day of month.Field_Name.Error_Number. OutDt = "30" Case InMonth = "5" * Internal date for first day of month. OutDt ="30" Case InMonth = "11" * Internal date for first day of month.Additional_Message) * * * Places the current Writes Error Messages to a Hash File * . OutDt ="31" Case InMonth = "9" * Internal date for first day of month.Case InMonth = "4" * Internal date for first day of month. OutDt ="30" Case InMonth = "7" * Internal date for first day of month. OutDt ="31" Case InMonth = "8" * Internal date for first day of month. JOBNAME) Path = ModRootPath : OsDelim :"error" : OsDelim FileName = "ErrorLog_HF.ME .RoutineName) vMessage = "INLOG Error Log = " : PathFile *Call DSLogInfo(vMessage. RoutineName ) . JobStageName. RoutineName ) vMessage = "INLOG Error Log Data = " : ModRunID : "|" : TicketFileID : "|" : TicketSequence : "|" : TicketSetKey : "|" : Table : "|" : Field_Name : "|" : Check_Value : "|" : Error_Number : "|" : Additional_Message *Call DSLogInfo(vMessage.H Ans = "ERROR" If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Move = 'move ' End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' Move = 'mv -f ' End JobName = DSGetJobInfo (DSJ. FilesOpened Common /TicketErrorCommon/ ModRunID. Used to build the default error message * Arg7: Error_Text_3 = Thrid error message argument. TicketSequence.* Input Parameters : Arg1: Table = The name of Control table being checked * Arg2: Field_Name = The name of the Field that is in error * Arg3: Check_Value = The value used to look up in the Hash file to get try and get a look up match * Arg4: Error_Number = The error number returned * Arg5: Error_Text_1 = First error message argument. Used to build the default error message * Arg6: Error_Text_2 = Second error message argument. TicketFileID. DSJ. Used to build the default error message * Arg8: Additional_Message = Any text that could be stored against an error * RoutineName = "LogToErrorFile" Common /HashLookup/ FileHandles(100)." : ModRunID PathFile = Path : FileName Call DSLogInfo(Path:"-. ModRootPath $INCLUDE DSINCLUDE JOBCONTROL. TicketSetKey.checking --" : PathFile. SetKey.TGrp. Locate FileName in FilesOpened Setting POS Then Write Err_Rec To FileHandles(POS). Openpath PathFile To FileHandles(POS) Then FilesOpened<-1> = FileName Write Err_Rec To FileHandles(POS).TSeg.FieldNa.Error.Key = JobName : JobStageName : ModRunID: TicketFileID : TicketSequence : TicketSetKey : Table : Field_Name Err_Rec = "" Err_Rec <1> = JobName Err_Rec <2> = JobStageName Err_Rec <3> = ModRunID Err_Rec <4> = TicketFileID Err_Rec <5> = TicketSequence Err_Rec <6> = TicketSetKey Err_Rec <7> = Table Err_Rec <8> = Field_Name Err_Rec <9> = Check_Value Err_Rec <10> = Error_Number Err_Rec <11> = Error_Text_1 Err_Rec <12> = Error_Text_2 Err_Rec <13> = Error_Text_3 Err_Rec <14> = Additional_Message * Attempt to find the table name in our cache. Key Then TAns = 0 End Else TAns = -1 End End Else * Table is not in cache of opened tables.KeyValue. so open it.Msg.Se verityInd) * * .Table. Key Then TAns = 0 Else TAns = -1 End End Else TAns = -2 End End Ans = "ERROR" Return(Ans) LogToHashFile: * FUNCTION LogToHashFile(ModRunNum. STAGENAME) Path = Mod_Root_Path : OsDelim :"error" : OsDelim FileName = "ErrorLog_HF. Mod_Root_Path.JOBNAME) * StageName = DSGetStageInfo (DSJ.H TAns = 0 If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Move = 'move ' End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' Move = 'mv -f ' End JobName = DSGetJobInfo (DSJ. FilesOpened Common /TicketCommon/ Ticket_Group. Chk_Hash_File_Name.ME. Mod_Run_Num $INCLUDE DSINCLUDE JOBCONTROL. an Invoice Number to a set of invoice lines * Arg5: Table = The name of Control table being checked * Arg6: FieldNa = The name of the Field that is in error * Arg7: KeyValue = The value used to look up in the Hash file to get try and get a look up match * Arg8: Error = The error number returned * Arg9: Msg = Any text that could be stored against an error * Arg10: SeverityInd = An Indicator to state the error severity level RoutineName = "LogToHashFile" Common /HashLookup/ FileHandles(100).DSJ. DSJ.g.ME.ME ." : Mod_Run_Num PathFile = Path : FileName *Message = "INLOG Error Log = " : PathFile *Call DSLogInfo(Message. Set_Key. Generic_Root_Path. Job_Stage_Name.* Places the current Writes Error Messages to a Hah File * * Input Parameters : Arg1: ModRunNum = The unique number allocated to a run of an Module * Arg2: Ticket_Group = The Ticket Group Number of the Current Row * Arg3: Ticket_Sequence = The Ticket Sequence Number of the Current Row * Arg4: Set_Key = A Key to identify a set of rows e. RoutineName ) . DSJ. Ticket_Sequence. Key Then TAns = 0 Else TAns = -1 End End Else TAns = -2 End End Ans = TAns RETURN(Ans) MandatoryFieldCheck: Check whether the field name passed is mandatory Routine to check to see if the passed field is populated. RoutineName ) Key = JobName : Job_Stage_Name : ModRunNum: TGrp : TSeq : SetKey : Table : FieldNa Err_Rec = "" Err_Rec <1> = JobName Err_Rec <2> = Job_Stage_Name Err_Rec <3> = ModRunNum Err_Rec <4> = TGrp Err_Rec <5> = TSeq Err_Rec <6> = SetKey Err_Rec <7> = Table Err_Rec <8> = FieldNa Err_Rec <9> = KeyValue Err_Rec <10> = Error Err_Rec <11> = Msg Err_Rec <12> = SeverityInd * Attempt to find the table name in our cache. and if not. to check to see if it is mandatory. Openpath PathFile To FileHandles(POS) Then FilesOpened<-1> = FileName Write Err_Rec To FileHandles(POS). so open it. then it is handled as if it is blank. Locate FileName in FilesOpened Setting POS Then Write Err_Rec To FileHandles(POS).*Message = "INLOG Error Log Data = " : ModRunNum : "|" : TGrp : "|" : TSeq : "|" : Set_Key : "|" : Table : "|" : FieldNa : "|" : KeyValue : "|" : Error : "|" : Msg *Call DSLogInfo(Message. . If the field contains "?". Key Then TAns = 0 End Else TAns = -1 End End Else * Table is not in cache of opened tables. A variable kept in memory (Mandlist) is used to record the mandatory check failures. DataIn. GroupIn. When the passed field name is "Getmand".RoutineName) Ans = -1 End * Call DSLogInfo("Initialisation Complete". * Routine to check whether the passed field is filled. and the process name when the first check flag is "Y". no processing is performed except to return the Mandlist field. field name. whether it is mandatory. Common /Mandatory/ Initialized. GroupV. ProcessIn. whether this is the first mandatory check for the record. * * The routine uses a UniVerse file "MANDATORY_FIELD_HF" which contains the mandatory field controls * * Arg1 Field name to be checked (literal) * Arg2 Field value * Arg3 Group name * Arg4 1st call for record * Arg5 The process name on the first call (this is saved in storage for subsequent calls) * * Declare shared memory storage. group name and exclusion flag to control mandatory or not. ProcessV EQUATE RoutineName TO 'MandatoryFieldCheck' * Call DSLogInfo("Routine started":Arg1. The routine arguments are the field name.RoutineName) If NOT(Initialized) Then Initialized = 1 * Call DSLogInfo("Initialisation Started". the field.RoutineName) Open "MANDATORY_FIELD_HF" TO SeqFile Else Call DSLogFatal("Cannot open Mandatory field control file".The routine uses a control table containing process name. SeqFile. Mandlist. the group key. and if not.RoutineName) End If Arg4 = "Y" Then Mandlist = "" ProcessIn = "":Trim(Arg5) If IsNull(ProcessIn) or ProcessIn = "" Then ProcessV = " " Else ProcessV = ProcessIn End . not mandatory".":Arg1 end .RoutineName) Ans = 1 end else * Call DSLogInfo(Arg1:" blank .If Arg1 = "Getmand" Then Ans = Mandlist Else DataIn = "":Trim(Arg2) GroupIn = "":Trim(Arg3) If IsNull(GroupIn) or GroupIn = "" Then GroupV = " " Else GroupV = GroupIn If IsNull(DataIn) or DataIn = "" or DataIn = "?" Then * * Field is blank .RoutineName) Ans = 0 end else mystring = ProcessV:Arg1:GroupV Read Retval From SeqFile. mystring then * Call DSLogInfo(Arg1:" Group specifically included".RoutineName) * mystring = ProcessV:Arg1:GroupV:"X" Read Retval From SeqFile.RoutineName) Ans = 1 end else mystring = ProcessV:Arg1:"ALL" Read Retval From SeqFile.RoutineName) Ans = 0 end end end End Else Ans = 0 * Call DSLogInfo(Arg1:" Not blank".check for mandatory * * Call DSLogInfo(Arg1:" blank . mystring then * Call DSLogInfo(Arg1:" Global mandatory".checking whether mandatory". mystring then * Call DSLogInfo(Arg1:" Group specifically excluded".RoutineName) End If Ans = 1 Then If Mandlist = "" Then Mandlist = Arg1 Else Mandlist = Mandlist:". Ticket_Sequence. Chk_Hash_File_Name. RoutineName ) *Message = "Map Mod_Run_Num ==>" : Mod_Run_Num * Call DSLogInfo(Message. return value is: -2 * * * RoutineName = 'Map' Common /HashLookup/ FileHandles(100).End Map:(Routinue Name) * FUNCTION Map(Value. Mod_Root_Path.ErrorLogInd) * * Executes a lookup against a hashed file using a key * * Input Parameters : Arg1: Value = The Value to Be Mapped * Arg2: FieldName = The Name of the field that is either the Target of the Derivation or the sourceField that value is contained in * Arg3: Format = The name of the Hash file containing the mapping data * Arg4: Default = The Default value to return if value is not found * Arg5: Msg = Any text you want stored against an error * Arg6: SeverityInd = An Indicator to the servity Level * Arg7: ErrorLogInd = An Indicator to indicate if errors should be logged * Arg8: HashfileLocation = An Indicator to indicate of errors should be logged (Note this is not yet implemented) * * Return Values: If the Value is not found. Job_Stage_Name. RoutineName ) *Message = "Map Chk_Hash_File_Name ==>" : Chk_Hash_File_Name * Call DSLogInfo(Message.FieldName.Format. or the Default value if that is supplied * If Format Table not found. Generic_Root_Path. RoutineName ) *Message = "Generic Root Path ==>" : Generic_Root_Path * Call DSLogInfo(Message. RoutineName ) DEFFUN . RoutineName ) *Message = "Map Mod Root Path ==>" : Mod_Root_Path * Call DSLogInfo(Message. Mod_Run_Num *Message = "Map Job Stage Name ==>" : Job_Stage_Name * Call DSLogInfo(Message.Default. FilesOpened Common /TicketCommon/ Ticket_Group. Set_Key.Msg. return value is: -1. FieldNam e.Key.LogToHashFile(ModRunNum.Text. RoutineName ) *Message = "Default ==>" : Default *Call DSLogInfo(Message.Ticket_Sequence.Set_Key. RoutineName ) *Message = "ErrorLogInd ==>" : ErrorLogInd *Call DSLogInfo(Message." : Format_Extn End Else PathFormat = Mod_Root_Path : OsDelim :"format" : OsDelim : Format : "_HF.Table.LogToHashFile' * If Len(Chk_Hash_File_Name) = 3 And HashFileLocation = "G" Then Format_Extn = Chk_Hash_File_Name Else Format_Extn = Mod_Run_Num [1." : Format_Extn End If IsNull(Value) then Chk_Value = "" Else Chk_Value = Value *Message = "Map PathFormat ==>" : PathFormat *Call DSLogInfo(Message. RoutineName ) * Set the Default Answer for if a value is not found . RoutineName ) *Message = "Format ==>" : Format *Call DSLogInfo(Message.Ticket_Group.Error.5] If System(91) Then OsType = 'NT' OsDelim = '\' NonOsDelim = '/' Move = 'move ' End Else OsType = 'UNIX' OsDelim = '/' NonOsDelim = '\' Move = 'mv -f ' End ColumnPosition = 0 PositionReturn = 0 Table = Format If HashFileLocation = "G" then PathFormat = Generic_Root_Path : OsDelim :"format" : OsDelim: Format : "_HF.SeverityInd) Calling 'DSU. RoutineName ) *Message = "Value ==>" : Value *Call DSLogInfo(Message. "|") If NumFields > 1 Then Default_Ans = Field(Chk_Value. Openpath PathFormat To FileHandles(POS) Then FilesOpened<-1> = Format Read Rec From FileHandles(POS).2) *Message = "Num Fields > 1 Default_Ans ==>" : Default_Ans : "#" : Chk_Value *Call DSLogInfo(Message."|".Begin Case Case UpCase(Default) = "NODEF" Default_Ans = "-1" Case Default = "PASS" NumFields = Dcount(Chk_Value. Chk_Value Else Rec = Default_Ans End If PositionReturn And Rec <> Default_Ans Then Ans = Rec<ColumnPosition> End Else . Locate Format in FilesOpened Setting POS Then Read Rec From FileHandles(POS)."|". RoutineName ) End Else Default_Ans = Chk_Value *Message = "Num Fields NG 0 Default_Ans ==>" : Default_Ans : "#" : Chk_Value *Call DSLogInfo(Message. Chk_Value Then If PositionReturn Then Ans = Rec<ColumnPosition> Else Ans = Rec End Else Ans = Default_Ans End End Else * Table is not in cache of opened tables. RoutineName ) End Case @TRUE If UpCase(Field(Default.1)) <> "BL" Then Default_Ans = Default Else Default_Ans = -1 End Case * Determine if we are returning one column or entire row. so open it. If Num(ColumnPosition) then ColumnPosition = Int(ColumnPosition) If ColumnPosition > 0 and ColumnPosition < 99999 Then PositionReturn = 1 End End * Attempt to find the table name in our cache. RoutineName ) End If (Ans = "-1" or Ans = "-2" or UpCase(Ans)= "BLOCKED" or LogPass = "Y" or SeverityInd = "I") and ErrorLogInd = "Y" Then *Message = "Write to Log Ans==> " : Ans : " ErrorInd==> " : ErrorLogInd *Message = "LOGGING" : Mod_Run_Num: "|" : Ticket_Group : "|" : Ticket_Sequence : "|" : Table : "|" : FieldName : "|" : Chk_Value : "|" : Ans *Call DSLogInfo(Message."|".Set_Key.Ta ble.2) End End *Message = "Outside LOGGING" : Mod_Run_Num: "|" : Ticket_Group : "|" : Ticket_Sequence "|" : Set_Key : "|" : Table : "|" : FieldName : "|" : Chk_Value : "|" : Msg *Call DSLogInfo(Message. RoutineName ) Ret_Code=LogToHashFile(Mod_Run_Num. RoutineName ) *Message = "OUTSIDE PASS Trans Default_Ans ==>" : Default_Ans : " Ans ==> " : Ans *Call DSLogInfo(Message. RoutineName ) LogPass = "N" If (Default = "PASS" and Default_Ans <> Ans) then LogPass = "Y" If LogPass = "Y" Then *Message = "PASS Trans Default_Ans ==>" : Default_Ans : " Ans ==> " : Ans *Call DSLogInfo(Message.Msg.1)) = "BL" and Ans <> -2 Then If Chk_Value = "" then Ans = Field(Default.Ticket_Group.Chk_Value.FieldName.Ans.SeverityInd) End RETURN(Ans) OutputJobStats: Outputs the job link statistics ."|".Ans = Rec End End Else Ans = "-2" End End If UpCase(Field(Default.Ticket_Sequence. 1] = Value [i.: The input field is checked to see if it conforms to the format that is also passed as a second parameter. Equate TransformName To "PatternMatchCheck" Begin Case .USERSTATUS) ErrCode = DSDetachJob(hJob) Ans = Start_TS : "|" : End_TS : "|" : Elapsed_Secs_Cnt : "|" : Job_Term_Status : "|" : User_Status Pattern: Routine="Pattern" Var_Len = len(Value) Pattern = Value For i = 1 To Var_Len If Num(Value [i. The result of the routine is True is the pattern matches the required format. and false if it does not.ERRFATAL) Start_TS = DSGetJobInfo (hJob.DSJ.1] = "a" end Else Pattern[i.JOBELAPSED) Job_Term_Status = DSGetJobInfo (hJob.DSJ.1]) Then Pattern[i. If the second parameter is empty. DSJ.1] = "n" end Else If Alpha(Value [i.JOBSTARTTIMESTAMP) End_TS = DSGetJobInfo (hJob.JOBINTERIMSTATUS) User_Status = DSGetJobInfo (hJob.1] end end Next i Ans = Pattern Checks a passed field to see if it matches the pattern which is also passed.DSJ.H hJob = DSAttachJob(JobName.JOBLASTTIMESTAMP) Elapsed_Secs_Cnt = DSGetJobInfo (hJob.$INCLUDE DSINCLUDE JOBCONTROL.DSJ. DSJ.1]) Then Pattern [i. then true is returned. Ticket_Sequence.Default.Set_Key. return value is -1. else the value supplied is returned * * * RoutineName = 'RangeChk' Common /TicketCommon/ Ticket_Group.Ticket_Group.Msg.Key.* Only 1 pattern passed Ans = Arg1 Matches Arg2 Case 1 .FieldNam e.ERRWARN) ErrCode1=DSPrepareJob(Job_Handle) ErrCode2 = DSDetachJob(Job_Handle) Ans= ErrCode2 RangeCheck: * FUNCTION Map(Value.Format.LogToHashFile' Table = "Min: " : MinValue "to Max: " : MaxValue Msg1 = "" Msg2 = "" . Mod_Root_Path.SeverityInd) Calling 'DSU.ErrorLogInd) * * Executes a lookup against a hashed file using a key * * Input Parameters : Arg1: Value = The Value to be checked * Arg2: MinValue = The Min Value allowed * Arg3: MaxValue = The Max Value allowed * Arg4: FieldName = The Name of the Source field being checked * Arg5: Msg = Any text you want stored against an error * Arg6: SeverityInd = An Indicator to the servity Level * Arg7: ErrorLogInd = An Indicator to indicate if errors should be logged * * Return Values: If the Value is not found.so return true Ans = 1 Case Arg3 = "" .FieldName.Text.* All other cases Ans = Arg1 Matches Arg2 : CHAR(253) : Arg3 End Case PrepareJob: $INCLUDE DSINCLUDE JOBCONTROL.Ticket_Sequence.Table. DSJ.* No pattern .Case Arg2 = "" .Set_Key. Generic_Root_Path.H Job_Handle = DSAttachJob (Job_Name.Error. Chk_Hash_File_Name. Mod_Run_Num DEFFUN LogToHashFile(ModRunNum. Ticket_Group.SeverityInd) End RETURN(Ans) ReadParameter: Read parameter value from configuration file * * Function : ReadParameter .Ans. RoutineName ) If Ans <> -1 and Ans <> -2 then Ans = Value If (Ans = "-1" or Ans = "-2") and ErrorLogInd = "Y" Then Ret_Code=LogToHashFile(Mod_Run_Num.ini) * Return : Parameter value from config file Function Readparameters(parametersname.Read parameter value from configuration file * Arg : ParameterName (default=JOB_PARAMETER) * DefaultValue (default='') * Config file (default=@PATH/config.OutputMsg.Ta ble.Value.ConfigFile) .FieldName.Ticket_Sequence.Set_Key.Msg3 = "" Msg4 = "" Ans = "" If Num (Value) = 0 then Msg1 = "-Value is not a number" Ans = -2 End If Num (Value) = 0 then Msg2 = "-MinValue is not a number" Ans = -2 End If Num (Value) = 0 then Msg3 = "-MaxValue is not a number" Ans = -2 End If Ans <> -2 Then If Value < MinValue Or Value > MaxValue Then Msg4 = "-Value is outside the Range" Ans = -1 End End OutputMsg = Msg : Msg1 : Msg2 : Msg3: Msg4 *Call DSLogInfo(OutputMsg.Defaultvalue. ini) * Return : Parameter value from config file * If ParameterName = "" Then ParameterName = "JOB_PARAMETER" If ConfigFile = "" Then ConfigFile = @PATH:"/config.Scheck.Read parameter value from configuration file * Arg : ParameterName (default=JOB_PARAMETER) * DefaultValue (default='') * Config file (default=@PATH/config.1)) = ParameterName Then ParameterValue = Trim(Field(Line.1) If NUM(Schar) then Rnum=Rnum:Schar End Next Outer Ans=Rnum .'='.'='.* Function : ReadParameter .ini" ParameterValue = DefaultValue OpenSeq ConfigFile To fCfg Else Call DSLogFatal("Error opening file ":ConfigFile. "ReadParameter") Loop While ReadSeq Line From fCfg If Trim(Field(Line.2)) Exit End Repeat CloseSeq fCfg Ans = ParameterValue RETURN(Ans) ReturnNumber: String=Arg1 Slen=Len(String) Scheck=0 Rnum="" For Scheck = 1 to Slen Schar=Substrings(String. The result is a dynamic array containing the job status.2] : NDateVal[1.ReturnNumbers: length=0 length=LEN(Arg1). Job parameters may be supplied.counter) END END counter=counter+1 Next Outer Ans=postNum ReverseDate: Function ReverseDate(DateVal) * Function ReverseDate(DatelVal) * Date mat be in the form of DDMMYYYY i. .e. and row count information for each link. length1=1.length2) END else postNum=RIGHT(Arg1.1] If NUM(Arg2) then length2=counter-1 if length2 = 0 then length2=counter postNum=RIGHT(Arg1.4] : NDateVal[3. For Outer = length to 1 Step -1 Arg2=Arg1[Outer. 01102003 or DMMYYYY 1102003 If Len(DateVal) = 7 then NDateVal = "0" : DateVal End Else NDateVal = DateVal End Ans = NDateVal[5. Outer=length.2] RunJob: The routine runs a job. postNum='' counter=1. The routine UtilityGetRunJobInfo can be used to interpret this result. ERRFATAL) * Prepare the job . A2.2) = Field(Field(Params.2) Next ParamNum JobStartTime = DSRTimestamp() JobHandle = DSAttachJob(RunJobName.ParamNum).1) = Field(Field(Params.2) .Arg3.Arg2. Arguments may * be passed in. A3) Calling "*DataStage*DSR_MESSAGE" Deffun DSRTimestamp Calling "DSR_TIMESTAMP" JobHandle = '' Info = '' ParamCount = Dcount(Params.ParamNum).'='.'='. DSJ.1) Param(ParamNum. Format of returned dynamic array: Status<1>=Jobname=FinishStatus Status<2>=Jobname Status<3>=JobStartTimeStamp Status<4>=JobStopTimeStamp Status<5>=LinkNames (value mark @VM delimited) Status<6>=RowCount (value mark @VM delimited) FunctionRunJob(Arg1.H Equate RoutineName To 'RunJob' Equate RunJobName to Arg1 Equate Params To Arg2 Equate RowLimit To Arg3 Equate WarnLimit To Arg4 Dim Param(100.* Limited to max of 100 parameters Deffun DSRMessage(A1. the routine parameters allow the job warning limit and row count limit to be set.'|'.As well as the job name and job parameters.'|'.Arg4) * Demonstrate how to run a job within the GUI development enviroment.'|') If RowLimit = '' Then RowLimit = 0 If WarnLimit = '' Then WarnLimit = 0 For ParamNum = 1 to ParamCount Param(ParamNum. The result is a dynamic array with the resulting status and run * statistics (row counts for every link on every stage in the job) * $INCLUDE DSINCLUDE JOBCONTROL. Param(ParamNum.* StartTime (Timestamp format) Info<3> = JobEndTime . DSJ. 'Getting job statistics'. 'Job Failed: %1'. ListOfParams = DSGetJobInfo(JobHandle.LIMITWARN. 'Setting Job Param . Param(ParamNum.%1 Setting to %2'.%1 Status of Attachment = %2'. RunJobName:@FM:JobHandle ) Call DSLogInfo(Message. RoutineName) End * Retrieve more information about this job run.') For ParamNum = 1 To ParamCount Message = DSRMessage('DSTAGE_TRX_I_0015'.') .'.PARAMLIST) ListCount = Dcount(ListOfParams. WarnLimit) * Need to check if error occurred.DSJ. RoutineName) StageList = DSGetJobInfo(JobHandle. '. RunJobName) Call DSLogWarn(Message. RoutineName) LinkCount = Dcount(LinkNames. RoutineName) ErrCode = DSSetParam(JobHandle.1):@FM:Param(ParamNum.DSJ. DSJ. DSJ.STAGELIST) Message = DSRMessage('DSTAGE_TRX_I_0017'. 'LinkNames for Stage.Stage).%1 = %2'.'. DSJ. RoutineName) StageCount = Dcount(StageList.'.ErrorCode = DSPrepareJob(JobHandle) Message = DSRMessage('DSTAGE_TRX_I_0014'.LINKLIST) Message = DSRMessage( 'DSTAGE_TRX_I_0018'. Message = DSRMessage('DSTAGE_TRX_I_0016'.Stage):@FM:LinkNames) Call DSLogInfo(Message.Field(StageList.') For StageLink = 1 To LinkCount * Get Rowcount For this linkname .'.RUNNORMAL) ErrCode = DSWaitForJob(JobHandle) Status = DSGetJobInfo(JobHandle. '' ) Call DSLogInfo(Message. RowLimit) LimitErr = DSSetJobLimit(JobHandle.2)) Next ParamNum ErrCode = DSRunJob(JobHandle. RoutineName) LimitErr = DSSetJobLimit(JobHandle. Field(StageList. DSJ. 'List of Stages=%1'.RUNFAILED Then Message = DSRMessage( 'DSTAGE_TRX_E_0020'. StageList ) Call DSLogInfo(Message. * Count number of active stages.2)) Call DSLogInfo(Message. Param(ParamNum. LinkNames = DSGetStageInfo(JobHandle. 'Attaching job for processing .'.JOBSTATUS) JobEndTime = DSRTimestamp() If Status = DSJS.* Now/End (Timestamp format) FOR Stage = 1 To StageCount * Get links on this stage.LIMITROWS.'.1). Info<1> = RunJobName Info<2> = JobStartTime . Stage).* Limited to max of 100 parameters Deffun DSRMessage(A1.'.Field(StageList. RoutineName) Ans = RunJobName:'=':Status:@FM:Info RunJobAndDetach: The routine runs a job.StageLink). As well as the job name and job parameters.'.Field(LinkNames.'.'.'.-1> = RowCount Next StageLink Next Stage Message = DSRMessage( 'DSTAGE_TRX_I_0020'.'|') If RowLimit = '' Then RowLimit = 0 .'.'.Arg4) * Run a job. LINKROWCOUNT) Message = DSRMessage( 'DSTAGE_TRX_I_0019'.StageLink) Info<5.'.DSJ.2) . RoutineName) Info<4.'. 'RunJob Status=%1'. The job is detached from so tht others may be started immediately and the control job finish.'. FunctionRunDetachJob(Arg1. Info ) Call DSLogInfo(Message. A2.Arg3. Field(StageList.RowCount = DSGetLinkInfo(JobHandle.-1> = Field(StageList. A3) Calling "*DataStage*DSR_MESSAGE" Deffun DSRTimestamp Calling "DSR_TIMESTAMP" JobHandle = '' Info = '' ParamCount = Dcount(Params.Stage):'.Stage):@FM:Field(LinkNames.'.StageLink):@FM:RowCount) Call DSLogInfo(Message. 'RowCount for %1. and detach from it so that this job can end * $INCLUDE DSINCLUDE JOBCONTROL.H Equate RoutineName To 'RunJobAndDetach' Equate RunJobName To Arg1 Equate Params To Arg2 Equate RowLimit To Arg3 Equate WarnLimit To Arg4 Dim Param(100. Job parameters may be supplied.':Field(LinkNames.'.Arg2. the routine parameters allow the job warning limit and row count limit to be set.%2=%3'. '='.2)) Call DSLogInfo(Message. Param(ParamNum.1):@FM:Param(ParamNum. RoutineName) LimitErr = DSSetJobLimit(JobHandle.ERRWARN) If JobHandle = 0 Then Call DSLogInfo("Job ":RunJobName:" not started .1) = Field(Field(Params.'.LIMITWARN.LIMITROWS. DSJ.'|'.Param(ParamNum.ParamNum).Ans. RowLimit) LimitErr = DSSetJobLimit(JobHandle.') For ParamNum = 1 To ParamCount Message = DSRMessage('DSTAGE_TRX_I_0015'.2) Next ParamNum * Attach to the job JobHandle = DSAttachJob(RunJobName.2)) Next ParamNum ErrCode = DSRunJob(JobHandle. 'Attaching job for processing . DSJ.1) Param(ParamNum.1).'='. DSJ. RoutineName) ErrCode = DSSetParam(JobHandle.RUNNORMAL) ErrCode = DSDetachJob(JobHandle) End Ans = 0 RunShellCommandReturnStatus: Function RunShellcommandreturnstatus(Command) Call DSLogInfo('Running command:':Command. DSJ.Command. ListOfParams = DSGetJobInfo(JobHandle. Param(ParamNum.'RunShellCommandReturnStatus') Return(Ret) . RunJobName:@FM:JobHandle ) Call DSLogInfo(Message.%1 Status of Attachment = %2'.2) = Field(Field(Params.ParamNum). 'Setting Job Param . WarnLimit) * Need to check if error occurred.'|'.PARAMLIST) ListCount = Dcount(ListOfParams.'RunShellCommandReturnStatus') Call DSExecute('UNIX'.If WarnLimit = '' Then WarnLimit = 0 For ParamNum = 1 to ParamCount Param(ParamNum.%1 Setting to %2'.attach failed".RoutineName) Else * Prepare the job ErrorCode = DSPrepareJob(JobHandle) Message = DSRMessage('DSTAGE_TRX_I_0014'. DSJ.Ret) Call DSLogInfo('Output from command:':Ans. key. return value is: -2 * * * RoutineName = 'SegKey' BlankFields = "" CRLF = Char(13) : Char(10) Message = "IN Seg Key" : Segment_Num : "|" : Segment_Parm : "|" : Key : "|" : ErrorLogInd : "|" * Call DSLogInfo(Message.SegKey: Segment_Num: An Integer number representing the order number of the Segment in the IDoc Segment_Parm: A Segment Parameter containing a string of Y's and N's in order of Segment_Num denoting of the segment should be written to in this Module Key: The Value to Be Mapped ErrorLogInd: An Indicator to indicate of errors should be logged (Note this is not yet implemented) Function Seqkey(Segment_Num.ErrorLogInd) * FUNCTION SegKey(Value."|") * Make a list of any keys that are missing .ErrorLogInd) * * Executes a lookup against a hashed file using a key * * Input Parameters : Arg1: Segment_Num * Arg2: Segment_Parm * Arg1: Key = An ordered Pip separated set of Seqment Primary Key Fields * Arg2: ErrorLogInd = An Indicator to indicate of errors should be logged (Note this is not yet implemented) * * Return Values: If the Value is not found. or the Default value if that is supplied * If Format Table not found.Segment_Num) If Write_Ind = "Y" then * Count how many keys NumKeys = Dcount(Key.segmentparam. return value is: -1. RoutineName ) * Determine if this segment should output Write_Ind = Field(Segment_Parm."|". abort.i) if Key_Part = "" Then Blank_Key_Cnt = Blank_Key_Cnt + 1 BlankFields<Blank_Key_Cnt> = i end ReturnKey = ReturnKey : Key_Part Next i If Blank_Key_Cnt > 0 and ErrorLogInd = "Y" then Message = "Error in Segment Key: ": Segment_Num : " There are " : Blank_Key_Cnt : " Missing Key Parts " : "The Missing Key Parts are" : BlankFields * Call DSLogInfo(Message. the routine assumes the Project directory If ParamFile is not supplied.."|".ParamFile If ParamDir is not supplied. The Routine may be invoked via the normal Before Job Subroutine setting.) The parameter file should contain non-blank lines of the form ParName = ParValue White space is ignored.Blank_Key_Cnt = 0 ReturnKey = "" For i = 1 to NumKeys Key_Part = Field(Key. The second instance will have to wait for the routine to finish before being allowed to proceed. the routine assumes the Job Name (this could be dangerous) The routine will abort the job if anything doesn't go to plan Note: a lock is placed to stop the same job from running another instance of this routine. RoutineName ) End If Blank_Key_Cnt > 0 then Ans = "Invalid_Key" End Else Ans = ReturnKey End End Else Ans = "Invalid_Key" End SetDSParamsFromFile: A before job subroutine to set Job parameters from an external flat file Input Arg should be of the form: ParamDir.. or from . The lock is released however the routine terminates (normal. H $INCLUDE DSINCLUDE JOBCONTROL. It is not possible to create Job Parameters on-the-fly because they are referenced within a Job via an EQUATE of the form JobParam%%1 = STAGECOM.1> JobParam%%2 = STAGECOM.H $INCLUDE DSINCLUDE DSD.H $INCLUDE DSINCLUDE DSD_RTSTATUS.JOB.So forget it! Subroutinues SetDsparmsformfile(inputArg..within the 'Job Properties->Job Control' window by entering "Call DSU. SetParms) ArgList = Trims(Convert('.NAME.STATUS<7. * set this to non-zero to stop the stage/job JobName = Field(STAGECOM.InputArg)) ParamDir = ArgList<1> If ParamDir = '' Then ParamDir = '.CONFIG<CONTAINER.ErrorCode)" For Andrew Webb's eyes only The routine could be made to work off a hashed file.@FM.'.NAMES> If ParamList = '' Then Call DSLogWarn('Parameters may not be externally derived if the job has no parameters defined.SetParams) Return End Call DSLogInfo("SetDSParmsFromFile inputarg >" : InputArg : "<".H Equ SetParams To 'SetDSParamsFromFile' ErrorCode = 0 .2> etc This is then compiled up.' End ParamFile = ArgList<2> If ParamFile = '' Then ParamFile = JobName End If System(91) Then Delim = '\' .SetParams('MyDir.Errorcode) $INCLUDE DSINCLUDE DSD_STAGE.MyFile'.1..'.STATUS<7.'.2) ParamList = STAGECOM. or environment variables quite easily.PARAM.'.. VALUES On Error Release DSRTCOM.RTSTATUS. JobName.RTSTATUS.':ParamList.SetParams) End Else Call DSLogWarn('File ':ParamPath:' not found .SetParams) Call DSLogInfo(JobName:' .PARAM.SetParams) ErrorCode = 2 Return End StatusId = JobName:'. Status = ':Status().RTSTATUS.'. StatusId.FVAR. JOB.SetParams) OpenSeq ParamPath To ParamFileVar On Error ErrorCode = 1 Call DSLogFatal('File open error on ':ParamPath:'.RTSTATUS. Status = ':Status().1) Readvu LockItem From DSRTCOM.FVAR.':STAGECOM.FVAR. JobName On Error Null ErrorCode = 1 Call DSLogFatal('File read error for ':StatusId:' on ':StatusFileName:'.RTSTATUS. 1 On Error Call DSLogFatal('File read error for ':JobName:' on ':StatusFileName:'.FVAR.WAVE. Status = ':Status().SetParams) Return End Loop ReadSeq ParamData From ParamFileVar On Error Release DSRTCOM. JobName On Error Null ErrorCode = 2 Call DSLogFatal('Failed to read ':StatusId:' record from ':StatusFileName.RTSTATUS.SetParams) Return End Else Release DSRTCOM.FVAR.End Else Delim = '/' End ParamPath = ParamDir:Delim:ParamFile Call DSLogInfo('Setting Job Parameters from external source ':ParamPath.using default parameters.NUM Readv ParamValues From DSRTCOM. JobName On Error Null ErrorCode = 4 .SetParams) Return End StatusFileName = FileInfo(DSRTCOM.FVAR.SetParams) ErrorCode = 1 Return End Else Call DSLogFatal('Failed to read ':JobName:' record from ':StatusFileName. VALUES> = ParamValues setParamsForFileSplit: Using values from a control file this routine will run a job multiple times loading the specified number of rows for each job run. JobName On Error Null ErrorCode = 6 Call DSLogFatal('Unable to write ':StatusId:' record on ':StatusFileName:'. StatusId.RTSTATUS.Call DSLogFatal('File read error on ':ParamPath:'.1.SetParams) Return End Else Exit End Convert '=' To @FM In ParamData ParamName = Trim(ParamData<1>) Del ParamData<1> ParamValue = Convert(@FM.RTSTATUS.SetParams) End Else Call DSLogWarn('Parameter ':ParamName:' does not exist in Job ':JobName. Status = ':Status().'PASSWORD'. JOB.RTSTATUS. * * This routine retrieves values from a control file and passes them as paramters to * .ParamPos) Then If Index(UpCase(ParamName).TrimB(ParamData)) Locate(ParamName.VALUES On Error Release DSRTCOM.SetParams) Else Call DSLogInfo('Parameter "':ParamName:'" set but not displayed on log'. Function setParamsForFileSplit:(ControlFilename.FVAR.ParamPos> = ParamValue Repeat Writev ParamValues On DSRTCOM. JobName On Error Null ErrorCode = 5 Call DSLogFatal('File write error for ':StatusId:' on ':StatusFileName:'. Status = ':Status(). Status = ':Status().PARAM.FVAR..ParamList. JobName On Error Null STAGECOM..SetParams) Continue End ParamValues<1.1) = 0 Then Call DSLogInfo('Parameter "':ParamName:'" set to "':ParamValue:'"'.JOB.RTSTATUS.Jobname) *********************************************************************** * Nick Bond.SetParams) Return End Else Release DSRTCOM.'='.FVAR.PARAM.SetParams) Return End Release DSRTCOM.FVAR.STATUS<JOB.. Routine) vFileName = ControlFileName vJobName = JobName vRecord = 1 ******** Open Control File and retrieve split values.RUNNORMAL) ErrCode = DSWaitForJob(vJobHandle) . 5 Then Call DSLogInfo('Load Records: ':vStart: ' to ' :vStop.H Equate Routine TO 'setParamsForFileSplit' Call DSLogInfo('Starting Routine '. 'newfile'. 4 Then READV vStop FROM vFILE. vNewFile = 'SingleInvoice':vRecord vJobHandle = DSAttachJob(vJobName. vRecord Then Call DSLogInfo('Loop Started: ':vFileName. Routine) ******** Start loop which gets parameters from control file and runs job. vRecord. 'StopID'. 'StartID'. Loop ** Check record exists for record id READ vStart FROM vFILE. DSJ. Call DSLogInfo('Opening File: ':vFileName. Routine) Call DSLogInfo('Control File ID: ':vRecord. vNewFile ) ErrCode = DSRunJob(vJobHandle. DSJ. Routine) End End ** Set Job Parameters and Run Job.* a job which is run once for each record in the control file. * ** *********************************************************************** $INCLUDE DSINCLUDE JOBCONTROL. Routine) Call DSLogInfo('File is open: ':vFileName. vStart) ErrCode = DSSetParam(vJobHandle.ERRFATAL) ErrCode = DSSetParam(vJobHandle. Routine) READV vStart FROM vFILE. vRecord. vStop) ErrCode = DSSetParam(vJobHandle. Routine) OPEN vFileName TO vFILE ELSE Call DSLogFatal("Can't open file: ":vFileName. "MD23") .Mod_Root_Path) * * Places the current Row Ticket in Common * * Input Parameters : Arg1: Mod_Run_ID = The unique number allocated to a run of an Module * Arg2: Ticket_File_ID = The File ID assigned to the source of the Current Row * Arg3: Ticket_Sequence = The Ticket Sequence Number of the Current Row * Arg4: Ticket_Set_Key = Identifies a set of rows e.Job _Stage_Name. Routine) Ans = vStart : '.Ticket_Set_Key."MD33") .".g. ' : vStop SetUserStatus: Function Setuserstatus(Arg1) Call DSSetUserStatus(Arg1) Ans=Arg1 SMARTNumberConversion Converts numbers in format 1234. * convert to internal to 3 decimal places Ans = OCONV(WRK.".vRecord = vRecord+1 End Else ** If record is empty leave loop GoTo Label1 End Repeat ******** End of Loop Label1: Call DSLogInfo('All records have been processed'.567 to format 1234.".Ticket_Sequence.Arg1) . * convert to external t 2 decimal places TicketErrorCommon Required to use the "LogToErrorFile" Routine. * Commas to decimal point WRK = ICONV(INP. an Invoice number to set of invoice lines * Arg5: Job_Stage_Name = The Name of the Stage in the Job you want recorded in the error log . This stores variables used by the routine in shared memory: * FUNCTION TicketErrorCommon(Mod_Run_ID.Ticket_Group.57 Function SMARTNUMBERconversion(arg1) INP = CONVERT(". " TestCountry = Count("AT.". ".ES.MT. "") End TVATest: Function Tvatest(Mtt_TVA.NL.HU.SI.GR.". TicketSequence.". SetKey.used for location of error hash file * * Don't Return Ans but need to keep the compiler happy Ans = "" RoutineName = 'ErrorTicketCommon' Common /TicketErrorCommon/ ModRunID.". SK.DE.PL. ".DK.mtt_TVA) BaseFormated = "":(Mtt_Base) TvaFormated = "":(Mtt_TVA) If IsNull(BaseFormated) or BaseFormated = "0" or BaseFormated= "" Then Ans = 0 End Else TvaFormated = Ereplace(TvaFormated.CZ. ModRootPath ModRunID = Mod_Run_ID TicketFileID = Ticket_File_ID TicketSequence = Ticket_Sequence SetKey = Ticket_Set_Key JobStageName = Job_Stage_Name ModRootPath = Mod_Root_Path RETURN(Ans) TVARate: Function TvaRate(mtt_Base.GB.IT. JobStageName. TicketFileID.* Arg6: Mod_Root_Path = Root of the module . "") TvaFormated = Ereplace(TvaFormated.". ". "") Ans = Ereplace(TvaFormated/BaseFormated. ". "") BaseFormated = Ereplace(BaseFormated.BE. Country) Begin Case Case Mtt_TVA <> 0 Reply = "B3" Case Mtt_TVA = 0 And Dlco = "FR" And TestCountry = 0 . "") BaseFormated = Ereplace(BaseFormated.SE.LV.CY.EE.LT.PT.LU.". ".Dlco) Country = TRIM(Dlco):".FI.IE. csv" *CMD = "ll -tr ":DIR:"|grep ":FNAME *CMD = "cmp -s ":DIR:"|grep ":FNAME CMD = "tar -xvvf ":DIR:FNAME *-------------------------------*---syntax= tar -xvvf myfile. CMD. Output. but can be used * within a production environment for tracing data values. SystemReturnCode) Ans = Output UtilityMessageToControllerLog Write an informational message to the log of the controlling job This routine takes a user defined message and displays it in the job log of the controlling sequence as an informational message.Reply = "A1" Case Mtt_TVA = 0 And Dlco <> "FR" And TestCountry = 1 Reply = "E6" Case Mtt_TVA = 0 And Dlco <> "FR" And TestCountry = 0 Reply = "E7" Case @True Reply = "Error" End Case Ans = Reply UnTarFile: Function Untarfile(Arg1) DIR = "/interface/dashboard/dashbd_dev_dk_int/Source/" FNAME = "GLEISND_OC_02_20040607_12455700. The user should . * * This function is mainly intended for development purposes.: Function UtilityMessageToControllerLog(Arg1) * Write an informational message to the log of the controlling job.tar *--------------------------------Call DSExecute("UNIX". The return value of the function is always 1. The routine should be used sparingly in production jobs to avoid degrading the performance. * use this function cautiously. Locate(ThisParam.ThisParam.H Equate RoutineName To "UtilityMessageToControllerLog" InputMsg = Arg1 If Isnull(InputMsg) Then InputMsg = " " End Call DSLogToController(InputMsg) Ans = 1 UTLPropagateParms: Routine allows a job to inherit parameter values from Job Control.DSJ.DSJ. * $include DSINCLUDE JOBCONTROL.JOBNAME) ChildParams = Convert('. Function UTLprapagateparam(Handle) #include DSINCLUDE JOBCONTROL. as it will cause a decrease in performance * if called often.ParentParams.@FM. getting value and setting parameter value in child job.ME. "UTLPropagateParms") End Else *** If the parameter is not found in parent job: .@FM) If ParamCount Then ParentParams = Convert('.DSJ.PARAMVALUE) ParamStatus = DSSetParam(Handle. Input Argument : Job handle (set by using DSAttachJob in Job Control) Output : If a parameter is not found the routine returns 3. otherwise 0.ThisValue) Call DSLogInfo ("Setting: ":ThisParam:" To: ":ThisValue.ME.DSGetJobInfo(Handle.'.ME.DSJ.ParamPos) Then ThisValue = DSGetParamInfo(DSJ.DSGetJobInfo(DSJ. This routine allows a job to inherit parameter values from Job Control by listing the parameters of child job and thereafter find the parameter in the parent job.PARAMLIST)) ParamCount = Dcount(ChildParams.'.PARAMLIST)) Loop ThisParam = ChildParams<1> Del ChildParams<1> *** Find job parameter in parent job and set parameter in child job to value of
[email protected] Equ Me To 'UTLJobRun' Ans = 0 ParentJobName = DSGetJobInfo(DSJ.ThisParam. . This routines allows generic starting of reception jobs without creating specific Reception Processing Sequence. Call DSLogWarn ("Parameter : ":ThisParam:" does not exist in ":ParentJobName.Module_Run_Parm Function Utilrunrece[pationjob(countryparam. 'MTS:'):': '" Ans = -3 vRecJobNameBase = Country_Parm : "_" : Fileset_Name_Type_Parm : "_Reception" *************************************************************************************** *** ################### *** *************************************************************************************** *** Define job to launch .H $INCLUDE DSINCLUDE JOBCONTROL. .Sequence or Job (START) *** *** *** L$DefineSeq$START: summary$<1.Propagates parameters using routine UTLPropagateParms.write a warning to log file.fileset_name_typeparam.modulerunparam.Determines job to launch (sequence or elementary job) .return code changed to 3.*** .Attaches job . "UTLPropagateParms") Ans = 3 End While ChildParams # '' Do Repeat End Return(Ans) UTLRunReceptionJob: This routines allows generic starting of reception jobs without creating specific Reception Processing Sequence. " ".Abort_Msg_Parm .Country_Parm .Abort_m sg_param) $INCLUDE DSINCLUDE DSJ_XFUNCS.Runs job and takes action upon result (any warning will lead to a return code NOT OK) Obligatory parameters in input are : .Fileset_Name_Type_Parm .-1> = Time$$:Convert(@VM. .H EQU Time$$ Lit "Oconv(Time(). *** . DSMakeMsg("DSTAGE_JSG_M_0057\%1 (JOB %2) started". Run and Wait for Reception Job (START) *** *** *** L$RecepJobPrepare$START: *** Activity "ReceptionJob": Setup.Sequence or Job (END) *** *************************************************************************************** *** ################### *** *************************************************************************************** *** Setup . vJobSuffix = "_Seq" vRecJobName = vRecJobNameBase : vJobSuffix GoTo L$AttachJob$START L$DefineJob$START: ** If no Sequential Job .start Sequential Job. ""). jbRecepJob:@FM:AttachErrorMsg$) MsgId = "@ReceptionJob". Run and Wait for job hRecepJob = DSPrepareJob(hRecepJob) If (Not(hRecepJob)) Then Msg = DSMakeMsg("DSTAGE_JSG_M_0012\Error calling DSPrepareJob(%1)<L>%2". "") MsgId = "@ReceptionJob" GoTo L$ERROR L$AttachJob$START: Call DSLogInfo(DSMakeMsg("Checking presence of " : vRecJobName : " for " : Module_Run_Parm."ReceptionJob":@FM:vRecJobNameBase)) ** If Sequential Job exists .start Elementary Job vJobSuffix = "_Job" vRecJobName = vRecJobNameBase : vJobSuffix GoTo L$AttachJob$START L$ErrNoJob$START: ** If no job found . "") jbRecepJob = vRecJobName hRecepJob = DSAttachJob(jbRecepJob. DSJ. .ERRNONE) If (Not(hRecepJob)) Then AttachErrorMsg$ = DSGetLastErrorMsg() If AttachErrorMsg$ = "(DSOpenJob) Cannot find job " : vRecJobName Then If vJobSuffix = "_Seq" Then GoTo L$DefineJob$START Else GoTo L$ErrNoJob$START End End Msg = DSMakeMsg("DSTAGE_JSG_M_0001\Error calling DSAttachJob(%1)<L>%2".warn and end job Msg = DSMakeMsg("No job found to attach" : vRecJobNameBase : "_Seq or _Job". GoTo L$ERROR GoTo L$ERROR End If hRecepJob = 2 Then GoTo L$RecepJobPrepare$START End *** *** *** Define job to launch . "PropagateParms":@FM:rPropagateParms)) IdAbortRact%%Result1%%1 = rPropagateParms IdAbortRact%%Name%%3 = "DSU. DSMakeMsg("DSTAGE_JSG_M_0057\%1 (JOB %2) started".NOERROR) Then Msg = DSMakeMsg("DSTAGE_JSG_M_0003\Error calling DSRunJob(%1). " ". reply=%2". If (rPropagateParms <> 0) Then GoTo L$ABORT GoTo L$RecepJobRun$START L$RecepJobRun$START: ErrCode = DSRunJob(hRecepJob. DSJ.-1> = Time$$:Convert(@VM. GoTo L$ERROR End summary$<1. If <> 0 then abort processing.UTLPropagateParms") MsgId = "@PropagateParms". "DSU.UTLPropagateParms")) RtnOk = DSCheckRoutine("DSU.-1> = Time$$:Convert(@VM.jbRecepJob:@FM:DSGetLastErrorMsg()) MsgId = "@ReceptionJob".UTLPropagateParms'(rPropagateParms. DSMakeMsg("DSTAGE_JSG_M_0064\%1 finished. "ReceptionJob":@FM:vRecJobName)) GoTo L$PropagateParms$START L$PropagateParms$START: *** Activity "PropagateParms": Propagating parameters from parent job to child job using separate routine. jbRecepJob:@FM:ErrCode) MsgId = "@ReceptionJob". " ".-1> = Time$$:Convert(@VM. "PropagateParms":@FM:"DSU. " ".RUNNORMAL) If (ErrCode <> DSJE. Run and Wait for Reception Job (END) *** *************************************************************************************** *** ################### *** *************************************************************************************** *** Verification of result of Reception Job (START) *** *** *** L$RecepJob$FINISHED: . GoTo L$ERROR End Call 'DSU.UTLPropagateParms") If (Not(RtnOk)) Then Msg = DSMakeMsg("DSTAGE_JSG_M_0005\BASIC routine is not cataloged: %1".UTLPropagateParms" *** Checking result of routine. summary$<1. DSMakeMsg("DSTAGE_JSG_M_0058\%1 (ROUTINE %2) started". code= %2[E]". hRecepJob) summary$<1. GoTo L$ERROR End ErrCode = DSWaitForJob(hRecepJob) GoTo L$RecepJob$FINISHED *** *** *** Setup . DSJ. "@Fail") GoTo L$ABORT L$SeqSuccess$START: *** Sequencer "Success": wait until inputs ready Call DSLogInfo(DSMakeMsg("Routine SEQUENCER .-1> = Time$$:Convert(@VM.Control End Sequence Reports a FAIL on Reception Job".RUNOK) Then GoTo L$SeqSuccess$START. "@UTLRunReceptionJob") Call DSLogWarn("Unrecoverable errors in routine UTLRunReceptionJob. MsgId:". see entries . MsgId) summary$<1. ":Msg)) bAbandoning = @True GoTo L$FINISH L$ABORT: summary$<1.JOBSTATUS) jobRecepJobUserstatus = DSGetJobInfo(hRecepJob. " ". "@Success") GoTo L$FINISH *** *** *** Definition of actions to take on failure or success (END) *** *************************************************************************************** *** ################### *** L$ERROR: Call DSLogWarn(DSMakeMsg("DSTAGE_JSG_M_0009\Controller problem: %1". status=%2[E]". DSMakeMsg("DSTAGE_JSG_M_0052\Exception raised: %1".-1> = Time$$:Convert(@VM. DSMakeMsg("DSTAGE_JSG_M_0056\Sequence failed". " ". Msg). ""). DSJ. "").jobRecepJobStatus = DSGetJobInfo(hRecepJob.USERSTATUS) summary$<1. DSMakeMsg("DSTAGE_JSG_M_0063\%1 finished.-1> = Time$$:Convert(@VM. bRecepJobelse = @False If bRecepJobelse Then GoTo L$SeqFail$START *** *** *** Verification of result of Reception Job (END) *** *************************************************************************************** *** ################### *** *************************************************************************************** *** Definition of actions to take on failure or success (START) *** *** *** L$SeqFail$START: *** Sequencer "Fail": wait until inputs ready Call DSLogInfo(DSMakeMsg("Routine SEQUENCER . "")) Call DSLogInfo(summary$. " ". "ReceptionJob":@FM:jobRecepJobStatus)) IdRecepJob%%Result2%%5 = jobRecepJobUserstatus IdRecepJob%%Result1%%6 = jobRecepJobStatus IdRecepJob%%Name%%7 = vRecJobName Dummy = DSDetachJob(hRecepJob) bRecepJobelse = @True If (jobRecepJobStatus = DSJS.Control End Sequence Reports a SUCCESS on Reception Job". Alpha. FilesOpened Common /TicketErrorCommon/ ModRunID.H vRoutineName = 'ValidateField' DEFFUN LogToErrorFile(Table. Date. Text_3.possible values (Numeric. The syntax for this is the same as for the Iconv function. Char) Date_Format: If Data_Type is 'Date' Then the format must be specified.e "D/YMD[4.2.LogToErrorFile" Common /HashLookup/ FileHandles(100). Message) Calling "DSU. vRoutineName) .-1> = Time$$:Convert(@VM. vRoutineName) * Argument for the data type is not valid CASE vData_Type <> "char" AND vData_Type <> "alpha" AND vData_Type <> "numeric" AND vData_Type <> "date" Call DSTransformError("The value " : Data_Type : " is not a valid data type for routine: ".Text_1.Error_Number. TicketSequence. vRoutineName) * Length is not a number CASE Not(Num(Length)) Call DSTransformError("The length supplied is not a number : Field Checked " : Field_Name. ModRootPath Ans = "START" vData_Type = Downcase(Data_Type) BEGIN CASE ******** Check the arguments * Value being checked is null CASE isNull(Field_Value) Call DSTransformError("The value being checked is Null .Text_2. TicketSetKey. TicketFileID.Field_Name = " : Field_Name. " ". Any errors are logged to the Error Hash File Field_Value: The value from the field being validated Field_Name: The name of the field being validated Length: The maximum length of the field being validated Data_Type: The data type expected .Check_Value. "@UTLRunReceptionJob") Ans = 0 ValidateField: Checks the length and data type of a value. i. "@UTLRunReceptionJob") Ans = -3 GoTo L$EXIT ************************************************** L$FINISH: If bAbandoning Then GoTo L$ABORT summary$<1. Also checks value is a valid date if the type is Date. "")) Call DSLogInfo(summary$. JobStageName. DSMakeMsg("DSTAGE_JSG_M_0054\Sequence finished OK".Field_Name.2]" for a date in the format 2004/12/23 $INCLUDE DSINCLUDE JOBCONTROL.above". Date_Format) vErr = Status() If vErr <> 0 Then vErr = LogToErrorFile("No Table".'Text1'.'10001'.'Text1'.'Text3'.'Text3'.Field_Value.'Value provided is not a valid date for mask ':Date_Format) Ans = ' [Invalid Date]' End End Else End End End *** Check the length of the supplied value *** If Len(Field_Value) <= Length Then vErr = 'OK' End Else vErr = LogToErrorFile("No Table".Field_Name.'Text3'.'Value provided is not the correct length') Ans = Ans : ' [Length Error]' .Field_Value.Field_Name.Field_Name.'Text2'.CASE vData_Type = "date" And (Date_Format = "" OR isNull(Date_Format)) END CASE ********* ******** Check The Values *** Check the data type of supplied value *** If vData_Type = 'numeric' Then If Num(Field_Value) Then vErr = 'OK' End Else vErr = LogToErrorFile("No Table".'Text2'.'Text1'.'Value provided is not alpha') Ans = ' [Not Alpha]' End End Else If vData_Type = 'date' Then vErr = Iconv(Field_Value.'10004'.'10003'.'10002'.'Text3'.'Text2'.Field_Value.'Text2'.'Value provided is not numeric') Ans = ' [Not Numeric]' End End Else If vData_Type = 'alpha' Then If Alpha(Field_Value) Then vErr = 'OK' End Else vErr = LogToErrorFile("No Table".Field_Value.'Text1'.Field_Name. Arg2.End Ans = Ans VatCheckSG: Function VatcheckSg(Arg1) String=Arg1 Slen=Len(String) Scheck=0 CharCheck=0 For Scheck = 1 to Slen Schar=Substrings(String.1) If NUM(Schar) <> 1 then CharCheck=CharCheck+1 end Next Ans=CharCheck WriteParmFile: Function writeparamfile(Arg1.Scheck.* at end-of-file Repeat . "Cannot Open ParamFile") End Loop ReadSeq Dummy From FileVar Else Exit .arg4) Arg1.arg3. File Path Arg2: File Name Arg3: Parameter Name Arg4: Parameter Value vParamFile = Arg1 : "/" : Arg2 vParamName = Arg3 vParamValue = Arg4 If Arg4 = -256 Then vParamValue = "" End OpenSeq vParamFile To FileVar Else Call DSLogWarn("Cannot open ":vParamFile . ErrorLogInd) * * Executes a lookup against a hashed file using a key * * Input Parameters : Arg1: Segment_Num * Arg2: Segment_Parm * * Return Values: If the Segment should be written return value is "Y" * If If not return value is "N" * * * RoutineName = 'WriteSeg' * Determine if this segment should output Write_Ind = Field(Segment_Parm.Segment_Num) If Write_Ind = "Y" then Ans = "Y" End Else Ans = "N" End FUNCTION ReadParameter(ParameterName.ConfigFile) * * Function : ReadParameter .ini) * Return : Parameter value from config file * . "Cannot write to file") End WeofSeq FileVar CloseSeq FileVar Ans=MyLine WriteSeg: * FUNCTION SegKey(Value.MyLine= vParamName : "=" : vParamValue *Write New Error File WriteSeqF MyLine To FileVar Else Call DSLogFatal("Cannot write to ": FileVar ."|".Read parameter value from configuration file * Arg : ParameterName (default=JOB_PARAMETER) * DefaultValue (default='') * Config file (default=@PATH/config. DefaultValue. DSJ. hStmt) .2)) Exit End Repeat CloseSeq fCfg Ans = ParameterValue RETURN(Ans) You can define parameters values in you config file (/ds/config?ini as an example) in the form : Parameter = Value InputFile = /ds/file.NULL. "ExecSQLProc") Ans = -1 Goto Finally End Else Call DSLogInfo("Connection OK " . dataSource.NULL.'='. DSJobName) *************************************************** ** FUNCTION ExecSQLProc(dataSource.HSTMT ** Connect to DataSource status = SQLAllocEnv(hEnv) status = SQLAllocConnect(hEnv.ME.ReadParameter" PrmName PrmConfig = 'InputFile' = '/ds/config. in your Job code : DEFFUN ReadParameter(ParameterName. ConfigFile) CALLING "DSU. PrmConfig) ErrCode = DSSetParam(DSJ.HDBC hstmt = SQL.H ** Initialise parameters ODBC Ans = -1 henv = SQL.INCLUDE ODBC.PARAMDEFAULT) PrmValue = ReadParameter(PrmName. DefafaultValue.ini' PrmDefault = DSGetParamInfo(DSJ.1)) = ParameterName Then ParameterValue = Trim(Field(Line.ME. hConn) status = SQLConnect(hConn. "ReadParameter") Loop While ReadSeq Line From fCfg If Trim(Field(Line. PrmValue) Call DSLogInfo("InputFile is ":PrmValue.ini" ParameterValue = DefaultValue OpenSeq ConfigFile To fCfg Else Call DSLogFatal("Error opening file ":ConfigFile. "ExecSQLProc") End ** Execution request (here. password ) If status = SQL.If ParameterName = "" Then ParameterName = "JOB_PARAMETER" If ConfigFile = "" Then ConfigFile = @PATH:"/config.'='.HENV hConn = SQL. userName .userName.NULL. PrmName.password) ==> RETURN (Ans) *************************************************** $INCLUDE UNIVERSE. PrmDefault.dat To set the value of parameter 'InputFile'. PrmName. my stored procedure ) status = SQLAllocStmt(hConn.ERROR Then Call DSLogInfo("Connection KO " . 1.INFO Then Call DSLogInfo("Request KO ".B.SUCCESS. i put it in 'res' (=> Ans) status = SQLBindCol(hStmt.Stmt= "exec MyStoredProc .SUCCESS AND status<>SQL. "ExecSQLProc") Ans = 0 End ** Free allocated ressources Finally: status = status = status = status = SQLFreeStmt(hStmt. Stmt) If status<>SQL.INFO Then Call DSLogInfo("Result KO".WITH. res) status = SQLFetch(hStmt) If status<>SQL. SQL.SUCCESS. "ExecSQLProc") status = SQLExecDirect(hStmt.DEFAULT. "ExecSQLProc") Ans = -1 Goto Finally End Else Call DSLogInfo("Result OK ". "ExecSQLProc") Call DSLogInfo("The result is " : res.SUCCESS AND status<>SQL.DROP) SQLDisconnect(hConn) SQLFreeConnect(hConn) SQLFreeEnv(hEnv) ." Call DSLogInfo("request SQL: " : Stmt.WITH. "ExecSQLProc") End ** If my stored proc return a result . SQL. "ExecSQLProc") Ans = -1 Goto Finally End Else Call DSLogInfo("Request OK ".