Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and fl...Page 1 of 67 This is the html version of the file http://www.marine-applications.com/assets/user/files/.svn/textbase/offshore_productrange.pdf. Google automatically generates html versions of documents as we crawl the web. Page 1 Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA®10 G 10 ® A [GB] G &OSN Co. K yA KME German http://webcache.googleusercontent.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:... 04-Oct-12 Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and fl... Page 2 of 67 Page 2 Contents Your Partner KME The Material Offshore Product Range Design Scope KME Quality-Management Pipes Elbows Equal Tees Reducing Tees Caps Reducers Saddle Pieces Composite Weld Neck Flanges 1 2 3 4 5 6 8 9 10 12 13 14 17 http://webcache.googleusercontent.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:... 04-Oct-12 Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and fl... Page 3 of 67 Composite Weld Neck Flanges Composite Slip-On Flanges Solid Weld Neck Flanges Solid Slip-On Flanges Composite Blind Flanges Capillary Brazing, Socket Weld Fittings and Miscellaneous Appendix 17 19 20 22 23 24 44 http://webcache.googleusercontent.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:... 04-Oct-12 KME The Expert in Seawater Piping Hundred years of experience..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. these alloys have successfully used in: • Merchant and military shipbuilding • Offshore oil and gas installations • Coastal petroleum and petrochemical processing plants • Seawater desalination plants Copper-nickel alloys are widely applied in: • Seawater cooling systems • Fire water systems • Sanitary systems • Deck steam pipes • Deluge systems • Hydraulic and pneumatic systems • Seawater feed lines to desalination and processing units • Splash zone sheathing http://webcache. Since decades.googleusercontent. a thorough understanding of the different industries’ specific problems. fittings and fl. plus qualified technical advice and assistance. Page 4 of 67 Page 3 Your Partner . a potent range of application-oriented products and services.. have been the bedrock of KME’s relations with its customers... Marine Applications KME’s division Marine Applications specializes in the production and supply of copper-nickel alloys for seawater piping system. 04-Oct-12 .Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Page 5 of 67 • Seawater desalination plants • Coastal electricity generation plants • Splash zone sheathing KME Germany AG & Co. KG — OSNA ®10 Page 4 The Material KME OSNA®10-Alloy The chemical composition of the KME’s OSNA®10alloy is modified to ensure the compliance with all international specifications.googleusercontent... Main Advantages of OSNA Despite the rough condition and the highly corrosive na products provide well balan technical and economical ad • Simple alloying system w • Excellent ductility and tou • Outstanding erosion corro • Resistant to uniform and l • No effect of ambient seaw • Resistant to biofouling • Resistant to stress • Low maintenance costs • No effect of seawater chlo • A lot of design experience http://webcache. fittings and fl..Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Controlled content of alloying elements and minimised concentration of impurities ensure reliable service and fabrication properties of the alloy. 04-Oct-12 ..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 5 –1.0 – 11. 0.01 max.0 –2.1972 BS 2871 1) CN 102 DIN EN 12449 144 UNS C 7060 x 10. 0. 0. 0. 0. max. 0.50 max. 10.50 max. 0.0 max. 0.0 – 2.30 rem.005 max.googleusercontent. max.005 max.5 – 1. 04-Oct-12 .5 –1.0 max.6 – 1.5 –1.02 max. 0. 0.0 – 2.03 max.5 –1.05 DIN CEN/TS 13388 CW352H 9.0 0. 0.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. 0.0 1) no longer valid equal to C 70600 for subsequent welding 2) * The iron content has been specified to improve corrosion resistance 2 Page 5 Offshore Product Range The OSNA 10 offshore product range is based on: http://webcache.0 0. 0.05 max. 0.0 –11. 0.0 max.05 max. 0. 0.0 1. 0.01 max.0 –11. 0.02 max. 0.20 rem. 0. 0.0 –11.0 1.02 max.05 max. 0.. 0.20 DIN 86019 WL 2. 9.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.05 – max.0 0.02 max.0 1.30 max. 0.02 max. 0.5 – 1. Cu % max. 0. 0.02 max.0 1.01 max... 10.20 rem. 0. 0.0 max. 0.05 max. 0.02 max.20 rem. 0.20 rem.8 0. 0.05 max. Page 6 of 67 Comparison of Standard Specifications for OSNA®-10 (CuNi 90/10) KME Alloy OSNA ®-10 (CuNi 90/10) Ni % Fe % Mn % C% Pb % S% P% Zn % Sn % other imp.8 0. fittings and fl.03 max.05 max.02 max. 0.0 1..02 max.0–11. 0.05 max.0 max.05 – – – 9.01 max. Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and fl... Page 7 of 67 The OSNA®10 offshore product range is based on: • EEMUA –144: 1987 Tubes1 Seamless and Welded • EEMUA –145: 1987 Flanges Composite and Solid • EEMUA –146: 1987 Fittings The unique dimensional range from ½ inch to 36 inch ensures the supply of the entire piping systems from one source. Although the pipe dimensions of 38 and 40 inch are not included in the EEMUA 144 – 1987 they are available here as they are commonly specified in offshore projects. Based on ASME specifications, additional components are included. 1 The reference „pipe“ rather than „tube“ is used in this document. http://webcache.googleusercontent.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:... 04-Oct-12 Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and fl... Page 8 of 67 KME Germany AG & Co. KG — OSNA ®10 Page 6 Design Scope Working pressures and temperatures of components included in this specification: 1. 16 bar/232 psi: -29°C/-20°F to +75°C/+167°F 2. 20 bar/290 psi: -29°C/-20°F to +38°C/+100°F Pipes Seamless and Welded: • Pipes are based on BS MA 60, DIN 86007, and ANSI/ASME B31.3 • The wall thicknesses comply with ANSI B31.3 and DIN 86007 as well as International Association of Classification Societies with additional allowances for robustness to withstand mechanical damage, especially in the smaller sizes. • The fit-for-purpose corrosion allowance of 0.5 mm sufficient for entire service life of the piping installation has been included. This corrosion allowance is in accordance with all major classification societies specified for alloys containing ≥10 wt. % Ni and ≥1.5 wt. % Fe. Mechanical properties of pipes are given in Appendix A. Flanges Composite and Solid: • Included series of composite (lap type) and solid flanges in metric dimensions based on ANSI B16.5, MSS SP-44 and BS 1560 • The basic metric dimensions for drilling and flange outside diameters are those given in ANSI B16.5 and MSS SP 44 Class 150 rating with inch size bolting. • The copper-nickel stub end and flange joint faces are machine finished and comply with the corresponding Sections of EEMUA 145 and are summarized in the Appendix A. • Mechanical properties pressure/temperature ratings of flanges Physical Properties of CuN The physical properties of t tension are in Table A-1. Welding by Appendix B. The basic a The welding consumables u with AWS in accordance Testing of Welds penetrant testing in turing of welded componen cedure specification and we The weld seams are examin section VIII, division 1, app phic examination is perform ASME code, section VIII, Gaskets The gaskets normally used in accordance length of each weld to mee those made from aramid fib The gasket hardness shall n 75 Shore. The gaskets shall In order to ensure adequate http://webcache.googleusercontent.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:... 04-Oct-12 Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and fl... Page 9 of 67 • Mechanical properties pressure/temperature ratings of flanges are given in Appendix A. Fittings: • The specification comprises a series for pipe fittings including butt weld, socket welding, capillary brazing, threaded, selfreinforced fittings as well as saddle pieces. • The “building in” dimensions of the butt welding fittings are based on ANSI B16.9 apart from the caps that are based on DIN 28011 (with suitable amendments). • Mechanical properties pressure/temperature ratings of fittings are given in Appendix A. In order to ensure adequate weldneck and solid slip irrespective of gasket mater shall be located within the b Gaskets should not be used elastomerlrubber faced flan Suggested Branch Connect Appendix D. PDMS Data available in the PDMS for more information. Suggested branch connectio The components mentioned 4 Page 7 KME Quality-Management http://webcache.googleusercontent.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:... 04-Oct-12 gained the reputation of being a reliable supplier throughout the world. To assure this. KME Quality Management System comprehends process-integrated quality controls. implemented and certified to DIN EN ISO 9001 by Lloyd’s Register Quality Assurance at all KME locations.. and. 04-Oct-12 . Page 10 of 67 Quality is the very basis of reliability – quality in every detail. KME Quality Management System has been set up.. The results of KME production give convincing proof: our results have been surpassing the requirements of national and international standards for years. For decades now. in every step of work.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. KG — OSNA ®10 Page 8 http://webcache. KME Germany AG & Co. internal product and system audits. The fulfilment of our customers expectations as to KME products and services in all re spects is the declared corporate policy. the systematical training of all employees and the operating of computer aided statistical methods. with it.. fittings and. KME produces quality. KME has been consistently putting into action the corporate idea of quality.googleusercontent..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. the pipes are supplied with plain weld ends. ASTM B171 or ASTM B402. Section 2.. Although the pipe dimensions of 38 in.1-1.3 as well as the requirements of the International Association of Classification Societies.2 and 2. The corresponding wall thicknesses of the pipes comply with the pressure containment requirements of ASME B31. They are manufactured from hot rolled or cold rolled and annealed sheet or plates in accordance with BS 2870../1016 mm are not included in the EEMUA 144 – 1987 they are available on request as they are commonly specified. Section 1. However. Pipes with other wall thicknesses are available on request. Larger thicknesses are supplied with the weld bevel of 37 Tolerances See notes 1-4 for seamless and notes 2 welded pipes./914 mm..2.2. http://webcache. Page 11 of 67 Pipes Seamless Pipes Seamless pipes are in accordance with EEMUA–144.googleusercontent../965 mm and 40 in. The pipes are supplied in “as welded” condition. 04-Oct-12 . Tables 1.2.2.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Welded Pipes Longitudinally welded pipes are in accordance with EEMUA–144. Mechanical testing is carried out in accordance with the standards above. the pipe diameters range from ½ in. Dimensions Dimensions are based on EEMUA –144.2. They are manufactured from hot extruded shells followed by cold work and annealing.1-2. fittings and. BS 2875./16 mm to 36 in. Weld Preparation For wall thickness less than 3 mm. .5 4.. fittings and.1 88..5 2.5 Specified Wall Thickness (mm) t 16 bar 20 bar 9.5 2.5 2.0 8.1 267 323.0 2.5 2.0 9..5 11.5 5.5 3.0 4.9 108 159 219.0 9.9 368 419 Specified Wall Thickness (mm) t 16 bar 2.0 3.5 57 76.5 2.0 4.0 2.0 20 bar 2.0 3.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.0 8.5 2.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 04-Oct-12 .2 508 8.5 5.5 2.5 6.5 2.5 2.0 Theoretical Weight/Metre http://webcache.5 7.5 3. Page 12 of 67 6 Page 9 Dimensions (mm) Seamless Pipe Size Nominal (in) ½ ¾ 1 1¼ 1½ 2 2½ 3 4 6 8 10 12 14 16 Size Specified (mm) 16 25 30 38 44.0 2.0 2.googleusercontent.5 2.0 Theoretical Weight/Metre Seam-Welded Pipe Size Nominal (in) 16 18 20 Size Specified (mm) 419 457.5 7. 0 19.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.. 45° and 90° elbows are available http://webcache. Note 4 Up to including 4 in. fittings and./108 mm.5 % of the spe cified value.0 15. the Note 2 The pipe size 6 in.0 13. 04-Oct-12 .../108 mm are based on BS 2871: Part 2: Table 3 for outside diameters and their tolerances to allow for the use of capillary and compression fittings and brazed (and welded) slip-on flanges.5 11. The wall thickness of the 16 bar range have been increased to match the 20 bar range for mechanical strength. For diameters from 6in.0 17. The pipes with other dimensions than mentioned herein are available on request./159 mm and larger.5 15. Larger dimensions are manufactured from longitudinally welded half shells.0 Note 1 The pipe sizes up to including 4 in./419 mm are also based on BS 2871: Part 2: Table 3 for specified diameters but the tolerance have been applied to the inside diameters for facilitate alignment of matching weld preparations.0 13. wall thickness is not less than 12. Page 13 of 67 20 24 28 32 36 508 610 711 813 914 8. KME Germany AG & Co. Please contact us for more information./159 mm up to 16 in. Seamless elbows are typically available up to 18 inch/457 mm.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. Section 1.googleusercontent. KG — OSNA ®10 Page 10 Elbows Type and Construction Elbows are in accordance with EEMUA–146. the wall thickness doesn’t vary by more than 10 % specified therein.5 10.. Stock Dimensions All seamless pipes are available from stock.5 12. Note 3 The ovality of the finished pipe doesn of the difference of the maximum and minimum diameter measured on the same cross section. 5 2.5 10.0 3.2 and 1..1-1.4-1.D.0 22 25 29 35 44 51 64 95 127 159 190 222 254 286 318 381 438 502 565 38 43 57 76 95 114 152 229 305 381 457 533 610 686 762 914 1067 1219 1372 E-Centre to Face 45° 90° 8 http://webcache.5 5.5 2.5 x O.5 12.5.9 368 419 457. i.googleusercontent.0 9.5 7.. Figure 1.0 15. Larger thicknesses are supplied with the weld bevel of 37 НАБ2 НА.0 4. Standard elbows are supplied with long radius.5 6. 45° and 90° elbows are available in all sizes.5 7..9 108 159 219.0 8. 146: Section Dimensions (mm) Nominal Size in 1 1¼ 1½ 2 2½ 3 4 6 8 10 12 14 16 18 20 24 28 32 36 Specified Size (OD) mm 30 38 44.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.e.0 19.5 15.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.5 5.0 4.1..5 3. Tables 1.5 2.0 8.5 57 76.2 508 610 711 813 914 3.0 17.0 8. Elbows with other dimensions are available on request.5 Use 20 bar Specified Pipe Wall Thickness t 16 bar 20 bar 2.0 13. 04-Oct-12 .5 2.5 4. Page 14 of 67 half shells. ti = intrados thickness (min) in EEMUA Publication No.0 9. 1.5 2. the elbows are supplied with plain weld ends..1 88.5 11. Tolerances See Appendix C Weld Preparation For wall thickness less than 3 mm. fittings and. Section 1.0 13. Dimensions Dimensions are based on EEMUA–146.1 267 323. bigger dimensions are welded. Seamless tee pieces are typically available up to 8 in. Section 1.1-1.1-1.googleusercontent.2 and 1.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.5 2.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. fittings and.. Page 15 of 67 Page 11 Equal Tees Type and Construction Tee pieces are in accordance with EEMUA–146. Dimensions (mm) Nominal Size in 1 1¼ 1½ 2 Specified Size (OD) mm 30 38 44.2. the tees are supplied with plain weld ends.5 57 Use 20 bar 16 bar Specified Pipe Wall Thickness t mm 20 bar 2. 04-Oct-12 .5 2. Larger thicknesses are supplied with the weld bevel of 37 НАБ2 НА. Tee pieces with other dimensions are available on request.5 2./219 mm. Section 1.6. Figures 1. Dimensions Dimensions are based on EEMUA -146..5 E 38 48 57 64 http://webcache. Tables 1... Tolerances See Appendix C Weld Preparation For wall thickness less than 3 mm. . the tees are supplied with plain weld ends.googleusercontent.0 17.3.0 15. Larger thicknesses are supplied with the weld bevel of 37 НАБ2 НА. KG — OSNA ®10 Page 12 Reducing Tees Type and Construction Pieces are in accordance with EEMUA –146.0 9. 04-Oct-12 .4 2.1-1. Seamless tee pieces are typically available up to 8 in. Dimensions for 16 bar systems Specified Size Pipe Wall Thickness Centre-to-End (mm) http://webcache.2.5 2.5 15..0 19.0 8.1 88.0 9.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.9 108 159 219..0 4.9 368 419 457.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.0 4.0 8.2 and 1.1-1.2 508 610 711 813 914 3. fittings and..1 267 323. bigger dimensions are welded./219 mm.0 76 86 105 143 178 216 254 279 305 343 381 432 521 597 673 KME Germany AG & Co. Section 1.5 7.5 10.5 7.5 5.0 8.0 13.5 4.0 13.5 3. Page 16 of 67 2½ 3 4 6 8 10 12 14 16 18 20 24 28 32 36 76. Tables 1. Section 1.1-1.5 5.5 6. Figures 1. Tolerances See Appendix C Weld Preparation For wall thickness less than 3 mm.5 11.0 3.7. Dimensions Dimensions are based on EEMUA -146.5 12.7. Tee pieces with other dimensions are available on request. 04-Oct-12 .9 323.0 7..5 8.0 8.2 457.0 10.0 3.5 8.0 12.5 4.5 4.5 8.googleusercontent.2 508 508 419 368 508 610 610 457.1 159 219.5 5..1 219.1 108 88.5 2.5 673 597 521 432 381 343 305 279 254 216 178 143 10 Page 13 Reducing Tees http://webcache.0 10.5 8.5 5..5 13.0 3.0 10.0 3. Page 17 of 67 Specified Size Pipe Wall Thickness Centre-to-End (mm) E OD mm OD mm OD1 mm t mm t mm t1 mm nom for sizes from 30 mm up to 108 mm use 20 bar 108 159 159 88.5 8.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.1 368 419 419 323.0 7.9 219.5 4.5 8.0 3.0 3..1 267 267 159 108 267 323.9 368 368 267 219.0 4.0 5.2 419 610 711 711 508 457.1 159 323.0 2.5 8.2 711 813 813 610 508 813 914 914 711 610 15.0 12.5 15.0 2.5 13.5 4.0 6.2 368 323.0 4.9 219.5 5.5 4.0 6.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.0 7.5 8.5 10.0 7.5 5.0 6.5 13.0 3.0 10.5 4.5 4.5 12. fittings and.5 8.5 7.5 3.5 12.9 76.5 4.0 3.5 6.9 267 419 457.0 6.9 457. 5 2.5 2.0 8..0 15.5 5.0 7.0 13..5 8.5 2.2 711 813 813 610 17.0 5.1 44.1 267 267 159 108 267 323.5 3.5 t mm 2.5 9.9 457.5 4.0 9.5 t1 mm 2.0 2. fittings and.9 323.0 9.5 76 2.5 9.0 5.0 13.5 86 2.9 219.0 7.googleusercontent.2 368 323.0 5.5 2.0 9.0 7.5 2.5 4.5 2.2 457.0 2.5 2.5 57 57 38 30 57 76.1 159 219.5 3.0 11.5 3.1 108 88.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.1 219.0 9.5 9.2 508 508 419 368 508 610 610 457.1 368 419 419 323.5 2.5 3.0 17.9 57 44.5 4.5 2.9 368 368 267 219.5 3.0 15.5 9.5 2.5 30 25 44. 04-Oct-12 .0 7.1 159 323.0 2.5 2..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.5 15.5 2.5 44.0 8.9 267 419 457.9 76.5 2.5 2.5 4.5 2.0 597 521 432 381 343 305 279 254 216 178 143 3.5 88.9 88. Page 18 of 67 Dimensions for 20 bar systems Specified Size Pipe Wall Thickness Centre-to-End (mm) E OD mm 30 38 OD mm 30 38 OD1 mm 25 30 25 38 44.0 5.9 219.1 57 108 159 159 88.5 3.0 9.5 2..9 108 108 76.5 2.5 105 2.5 9.0 11.0 8.0 8.0 13.0 2.1 88.5 2.1 76.0 13.0 11.0 11.5 2.0 57 nom 38 48 http://webcache.5 38 76.5 4.2 419 610 711 711 508 457.5 3.5 3.5 64 t mm 2.5 2.5 7.0 3.0 2. 8 2. KG — OSNA ®10 Page 14 Caps Type and Construction End caps are in accordance with EEMUA –146. Figure 1. Section 1.29 5.29 5. 16 bar Specified Size OD 44.9 108 159 219.25 2.1 12.25 2. Tolerances See Appendix C Weld Preparation For wall thickness less than 3 mm. the caps are supplied with plain weld ends.21 20 bar H mm 19.25 2.34 7.24 5.4 http://webcache.7 44 60 69 85 103 112 16 bar Approx.0 3.25 2.2 31.. 04-Oct-12 .21 8.12 4.1-1.0 17.5 57 76. The additional wall compensatory thicknesses over and above the minimum pipe wall thicknesses are included.9 368 419 2.0 13.90 6.4 5. Section 1 and seamless.23 6..0 673 KME Germany AG & Co. Tables 1.1 88.70 3.1.googleusercontent.0 15.54 4.63 3. Caps with other dimensions are available on request. Dimensions Dimensions are based on EEMUA -146.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Weight kg Use 20 bar 0. fittings and. Page 19 of 67 508 813 914 914 711 610 19. Larger thicknesses are supplied with the weld bevel of 37 НАБ2 НА.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.0 19.2 and 1.0 11.8...7 28.9 9.1 267 323.73 41 55 69 80 93 102 Use 20 bar t min mm H mm t min mm 2.6 22.0 25. Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.50 13.1-1. Tabl are available on request.2 508 610 711 813 914 6.97 17.96 112 119 139 163 191 210 231 12.81 11. 8 in.81 102 119 129 148 176 200 221 8.96 11.7 39. bigger dimensions are seamwelded.9. Weight 20 bar kg Weld Preparation kg For wall thickness less than http://webcache....73 7./219.33 8.96 13. Figures 1.97 15.3.5 132..97 9.17 14. Dimensions Dimensions are based on EE Section 1. 12 in.1 mm in seamless condition.8 90. Page 20 of 67 419 457. Reducers with o Specified Size OD mm Length H mm Specified Wall Thickness t x t1 16 bar mm 20 bar mm 16 bar Approx.21 8.15 9.1. fittings and. Tolerances See Appendix C 1.9 mm in seamless condition. 04-Oct-12 ./323. Section 1.googleusercontent. bigger dimensions are seamwelded.2 12 Page 15 Reducers Type and Construction Eccentric and concentric reducers are in accordance with EEMUA –146.4 17. The eccentric reducers are supplied up to incl.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.6 22.9.2 61. The concentric reducers are typically supplied up to incl. 0 x 4.00 25.79 2.89 11.5 x 4.70 87.5 x 2.60 2.5 3.2 x 368 457.0 x 7.5 x 2. KG — OSNA ®10 http://webcache.0 9.5 x 13.5 8.0 x 6. Page 21 of 67 mm 57 57 57 76.0 x 5.0 4.40 0.5 13.77 1.40 158.5 x 3.5 13.50 64.5 3.0 x 5.1 x 76.50 34.5 x 5.38 17.0 5.64 2.0 5.5 x 8.0 17 x 11 17 x 13 17 x 15 19 x 13 19 x 15 19 x 17 kg 0.40 0.31 7.0 4.0 x 10.50 92.1 323.5 7.9 x 76.97 30.50 37.5 x 3.5 13.1 x 159 267 x 108 267 x 159 267 x 219.0 x 11..30 116.0 10.5 x 8.0 10.10 75.0 x 8.2 x 419 508 x 368 508 x 419 508 x 457.1 108 x 88.0 10.0 13.44 25.5 8.0 x 2.20 226.5 7.5 x 2.5 x 12 15.0 x 7.0 15 x 9.9 x 267 368 x 219.0 11.80 1.5 3.5 13.44 0..5 x 2.2 610 x 508 711 x 457.0 9.5 7.5 x 3.0 x 9.29 0.5 2.68 20.0 x 2.5 x 2.52 1.5 x 10.5 x 3.0 12.5 x 2.50 0.30 136.11 3.0 4.5 15.80 109.5 8.5 x 2.0 5.5 x 8.5 8.10 231.5 7.9 419 x 368 457.0 4.1 323.5 x 12.0 x 9.5 4.24 18.68 9.9 457.00 32.0 x 9.89 6. fittings and.0 x 2.5 13.5 3.5 4.5 3.5 x 9.0 9.0 4.60 5.5 3.0 x 2.googleusercontent.0 x 4.60 146.5 6.80 1.5 x 2.9 419 x 267 419 x 323.0 4.77 3.0 x 2.2 610 x 419 610 x 457.5 3.5 x 8.29 0.50 102.5 x 4.5 mm 76 76 76 89 89 89 102 102 102 140 140 140 140 152 152 152 152 178 178 178 203 203 203 330 330 330 356 356 356 381 381 381 508 508 508 508 508 508 610 610 610 610 610 610 610 610 610 mm 2.5 2.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.5 7.44 0.0 x 6.1 219.0 x 2.0 x 2.1 108 x 57 108 x 76.70 34.87 21.0 x 5.5 x 2.5 x 8.5 x 4.5 x 4.67 0.0 15 x 13.30 224.00 76.5 12.21 4.0 x 7.5 4.80 For wall thickness less than reducers are supplied with p weld bevel of 37 Larger thicknesses are supp KME Germany AG & Co.40 179.1 x 108 219.80 133.29 0.5 15 x 11.50 0.20 70.68 1.0 x 2.5 4.9 x 159 323.67 0.1 x 88.5 2.0 x 5.5 3.0 9.9 159 x 108 219.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.50 185.75 0.0 6.5 x 7.5 5.0 8.5 2.5 x 4.5 x 2.0 x 8.06 37.1 368 x 267 368 x 323.5 6.9 x 57 88.5 8.5 x 2.1 159 x 88.03 41.10 71.5 x 7.0 x 3.5 x 2.43 26.5 x 10.44 1..0 x 3.00 285.60 197.5 8.30 81.5 2.29 0.91 2.50 46.70 255.50 23.5 2.5 2.5 x 3.0 5.29 0.0 9.5 x 2.2 x 323.5 3.0 x 3.54 1.5 x 3.0 8.90 50.2 711 x 508 711 x 610 813 x 508 813 x 610 813 x 711 914 x 610 914 x 711 914 x 813 x 30 x 38 x 44.5 3.0 x 2..9 x 219.5 3.0 x 3.5 x 6.0 11.70 170.0 15.5 5.52 6.5 2.00 30.30 137.30 kg 0.0 x 4.5 x 2.84 5.5 2.0 4.75 0.5 3.29 0.00 207.5 8.0 x 8.40 61. 04-Oct-12 .5 x 2.60 9.0 x 5.5 7.5 12.1 x 57 88.92 3.5 9.0 x 8.0 11.0 x 2.9 219.5 x 4.5 3.71 7.9 159 x 57 159 x 76.49 2.5 mm 2.63 8.5 2.5 x 2.5 x 3.5 x 2.10 172.39 23.5 3.65 10.5 x 7.32 1.80 55.0 x 2.0 x 9.5 x 3. 0 5.5 4. Section 7. Saddle pieces with other dimensions are available on request.5 2.5 2.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.9 mm are supplied in seamless. the saddle pieces are supplied with plain weld ends. Section 7.0 2.1 57 44.5 2.2.5 3.. fittings and.3 and Tables 7..googleusercontent.0 2.5 3..5 (16 bar) 610 x 13 (20 bar) 267 219.3.0 3.1 159 108 88. Weld Preparation Welding ends of butt weld ends for wall thickness less than 3 mm. Section 7.1-7.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Figures 7.5 2.1-7.5 38 16 bar mm 5.2.5 2.5 t 20 bar mm 7. Saddle pieces up to including 12 in. Larger dimensions are manufactured from seamless or welded pipes as well as plates. Page 22 of 67 Page 16 Saddle Pieces Type and Construction Saddle pieces are in accordance with EEMUA –146.1. Tolerances The tolerances are based on EEMUA – 146.3. Seamless Seamless saddle pieces Header Speciefied OD mm Branch Size Range mm 323 All header sizes equal to or larger than branch up to and including 914 x 15. Dimensions Dimensions are based on EEMUA -146.5 4.5 t Dimension L mm 560 447 379 279 188 149 126 97 74 64 Tolerance on L mm ±6 ±5 ±5 ±4 ±4 ±3 ±3 ±3 ±3 ±3 http://webcache.5 2. Larger thicknesses are supplied with the weld bevel of 37 НАБ2 НА.2. 04-Oct-12 .1-7.5 2. Tables 7./323..5 2.9 76.0 3.5 4. Tolerances The tolerances are based on EEMUA – 146..1-7. Section 7. 14 Page 17 Saddle Pieces Type and Construction Saddle pieces are in accordance with EEMUA –146.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. Page 23 of 67 Note Other sizes and reducing saddles are available on request.3. Weld Preparation Welding ends of butt weld ends for wall thickness less than 3 mm. Figures 7.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.3. Section 7. Section 7.1.1-7. Saddle pieces with other dimensions are available on request. Larger dimensions are manufactured from seamless or welded pipes as well as plates./323.2. Dimensions Dimensions are based on EEMUA -146.9 mm are supplied in seamless.. 04-Oct-12 . Tables 7.1-7. Larger thicknesses are supplied with the weld bevel of 37 НАБ2 НА. fittings and.googleusercontent. Seamwelded http://webcache. the saddle pieces are supplied with plain weld ends. Saddle pieces up to including 12 in.2.2..3 and Tables 7.. 0 323. 04-Oct-12 .1 x 4.5 419 x 9..0 368 x 8.. The components are manufactured by http://webcache.googleusercontent.5 711 x 12 610 x 10.0 Dimension L mm 1550 1400 1225 1020 880 800 680 613 560 447 379 Tolerance on L mm ±7 ±7 ±7 ±7 ±6 ±6 ±6 ±6 ±6 ±5 ±5 Dimension h mm 460 410 360 300 275 250 225 200 185 155 125 Tolerance on Seamwelded saddle pieces .1 x 4.9 x 7.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.20 bar rating Header Speciefied OD mm Branch Size Range mm 610 x 13 All header sizes equal to or larger than branch in the range 323.2 x 9.5 508 x 8.9 x 5.5 323.16 bar rating Header Speciefied OD mm Branch Size Range mm 914 x 15.5 219.9 x 7. Page 24 of 67 Seamwelded saddle pieces . Section 6.0 267 x 5.9 x 5.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. KG — OSNA ®10 Page 18 Weldolets Type and Construction Weldolets are in accordance with EEMUA–146.5 up to and including 914 x 15.5 813 x 13. fittings and.0 up to and including 610 x 13 508 x 11 457..5 219.5 267 x 4.5 457..5 All header sizes equal to or larger than branch in the range 323.0 419 x 7.2 x 8.5 Dimension L mm 1020 880 800 680 613 560 447 379 Tolerance on L mm ±7 ±7 ±6 ±6 ±6 ±6 ±5 ±5 Dimension h mm 300 275 250 225 200 185 155 125 Tolerance on KME Germany AG & Co.0 368 x 6. 25.45 24./965 mm.88.25 2.90 255.0 104.965 159 .07 51.25 2.965 323.965 44. fittings and. 04-Oct-12 .00 . Weldolets Branch Speciefied OD mm 16 25 30 38 44.219.56 32.48 .5 .965 267 . Section 6./16 mm to 38 in.googleusercontent.0 .0 215.965 76.8 .0 31.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.50 .58 .8 2.1 267 323.267. The design of the self reinforced connection is in accordance with ASME B31.70 70.50 350.99 .53 53 56 60 70 78 86 89 94 mm 11.50 .170.9 .0 53.8 .58.25 2.57 . The sizes of the header pipes for a given branch size are consolidated in accordance with MSS SP-97.25 2.0 72.45 20.9 368 419 Header Size Range mm 16 .0 320.0 263.0 415.8 .8 0.9 .0 1.1 88.31.00 209.17.00 L D Nom mm 12.65 .8 ./419 mm.8 K min/max http://webcache.7 .8 .8 0.7 .75.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Dimensions The dimensions and tolerances are suitable for welding to seamless and seam-welded pipes to EEMUA – 144.1.49 .6 mm.70 309.0 85.0 26.965 30 .3 suitable for both 16 and 20 bar pressure ratings..5 57 76.965 25 .52.256.965 368 .0 364.84.00 151.965 419 .9 .12.40 . Other branch sizes are available on request.965 88./1.00 .80 83.25 2.21. The additional design feature is the smooth entry into the connection to reduce the turbulences. The overall dimensions are based on EEMUA -146.3 Section 304.0 .71. The components are manufactured by hot forging and machining from extruded bars (solid or hollow).20 .401..368.8 .965 38 .40 . whereas the gap distance between the header pipe radius and the fitting inlet radius doesn’t exceed 1/16 in.00 . The branch size covered is from ½ in.25 0.45.102.3 .965 57 .40.127.1 .0 41.8 0.324.0 34.9 .8 0.8 0.108.85 125.965 108 ..26.0 146..8 0.0 155.57 38.00 399.210. The weldolets covered are suitable for application to header sizes from ½ in.352.3 and Figure 1.65 101.0 .33.310.62 .50 .9 108 133 159 219.965 Nom mm 18 23 26 29 32 36 43 44 ./ 16 mm to 16 in.419.965 159 .153.1 .8 1. Page 25 of 67 Section 6.8 0.40. Table 6. Section 3.8 .965 219. Tolerances The tolerances are based on EEMUA–145.00 21.googleusercontent. Dimensions Dimensions are based on EEMUA-145. The Type L stub ends are included to facilitate the attachments of this type of flange to butt weld welding fittings in accordance with EEMUA-146.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 04-Oct-12 .00 H1 mm 35 40 H mm 51 51 h2 mm 4 5 h5 mm 15 15 http://webcache. Tables 1.. The stub ends are subdivided in two types short (Type S) based on DIN 86037 and long (Type L) based on MSS SP-43 suit the appropriate pipe dimension.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Page 26 of 67 16 Page 19 Composite Weld Neck Flanges: Weld Neck Stub Ends and Backing Flanges Type and Construction The weld neck stub ends are in accordance with EEMUA 145. Larger dimension are supplied with the weld bevel of 37 НАБ2 НА. Weld Preparation The stub ends with S1<3mm are supplied with plain weld ends. Section 1A. The range of sizes covered is ½ in.1.. fittings and. Section 1A..5. Table 1./16 mm to 36 in./914 mm. Other sizes are available on request.. Type L 16 bar Nominal Size in ½ ¾ mm 16 25 d3 mm 16 25 d4 mm 40 50 d6 mm 18 27 d7 mm 20 bar Type S Type L d7 mm 12.3. Section 1A for 16 and 20 bar systems.2-1. 1 88..83 354.5 and BS 1560.50 876..38 210.50 786.1 88.50 40 40 40 45 45 45 50 50 50 50 50 50 50 50 50 50 60 60 60 60 51 51 51 51 64 64 64 76 89 102 127 152 152 152 152 152 152 190 190 190 5 5 5 6 6 6 7 7 9 9 9 11 11 12 12 12 14 19 20.2 508 610 711 813 914 50 60 70 80 99 120 130 158 212 270 320 370 430 482 530 585 685 800 905 1000 27 32 40 46.53 52. whereas the larger sizes. Other sizes are available on request.00 33.. fittings and.50 490.03 39. 04-Oct-12 .75 211./16 mm-24 in.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.00 25. The chemical composition and mechanical properties of the components are in accordance http://webcache.1 267 323.93 309./914 mm Class 150.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.5 59 78 91 110 161.10 257.50 486.1 267 323.50 Use 20 bar 21.50 584. The backing flanges are manufactured from forged carbon steel in accordance with ASTM A105.9 108 159 219. Section 1B and are suitable for both 16 and 20 bar pressure rating.22 404.googleusercontent.5 22 15 15 15 15 15 15 15 15 15 15 15 16 16 16 16 20 20 24 24 32 KME Germany AG & Co.50 589.5 57 76.16 71.50 883.9 368 419 457.5 222 270 327 371 422 460 511 613 719 821 922 153.50 681. KG — OSNA ®10 Page 20 Composite Weld Neck Flanges: Weld Neck Stub Ends and Backing Flanges Type and Construction The weld neck backing flanges are in accordance with EEMUA 145./16 mm to 36 in.97 312. 28 in.50 779.5 57 76./711 mm -36 in.74 351./914 mm are in accordance with MSS SP-44. Page 27 of 67 ¾ 1 1¼ 1½ 2 2½ 3 4 6 8 10 12 14 16 18 20 24 28 32 36 25 30 38 44. The range of sizes covered is ½ in.17 441..50 687.9 368 419 457.84 438.00 399.2 508 610 711 813 914 25 30 38 44. Drilling and outside diameter dimensions of flange sizes ½ in.08 102.23 84.13 152.9 108 159 219./610 mm are in accordance with ANSI B16.10 255. com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.0 22.8 34.6 31. Nominal Size in ½ ¾ 1 1¼ 1½ 2 2½ 3 4 6 8 10 12 14 16 18 20 24 28 32 36 mm 16 25 30 38 44.4 362.3 269.5. Section 1B. The recommended bolting is in accordance with ASTM A193-B7..0 No.9 15.9 15. Table 1.0 19.8 79. 04-Oct-12 .0 19.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.9 108 159 219. Section 1B.0 978.9 15.8 577.2 22.9 98.9 41.. Additional organic coatings such as polyamide epoxy are available on request.0 749.0 335.0 431.6 28.6. mm 14 14 14 14 14 18 18 19 24 27 31 38 41 45 51 52 58 71 81 95 105 11/8 11/8 11/4 11/4 13/8 13/8 15/8 15/8 in 5 /8 5 /8 5 /8 5 /8 5 /8 3/4 3/4 3/4 3/4 7 /8 7 /8 b d2 mm 15.4 88. Page 28 of 67 properties of the components are in accordance with EEMUA 145.2.1 41. Unless otherwise specified the flanges are protected by hot dipped galvanising.3 69.9 15.4 25.9 368 419 457.0 1086.3 864..2 25.4 120.2 539.3 298.4.googleusercontent.8 31.9 19.6 139.8 As for 20 bar 1 1 18 Page 21 Composite Slip-On Flanges: http://webcache.4 190.8 635.1 d5 mm 19 28 33 41 48 62 81 94 113 164 225 273 330 374 426 465 517 618 727 829 931 K mm 60. fittings and.8 476.4 28.5 57 76. Dimensions Dimensions are based on EEMUA -145. Table 1.4 180. of Bolts 4 4 4 4 4 4 4 4 8 8 8 12 12 12 16 16 20 20 28 28 32 e mm 2 3 3 3 3 3 3 3 3 4 5 5 7 7 7 7 7 9 9 9 9 131.1 267 323.9 34.2.2 508 610 711 813 914 D mm 89 98 108 117 127 152 178 190 229 279 343 406 483 533 597 635 698 813 927 1060 1168 min.5 241..1 88. Section 1B. Table 1.7 152.0 19. Tolerances The tolerances are based on EEMUA – 145. The backing flanges are manufactured from forged carbon steel in accordance with ASTM A105. The recommended bolting is in accordance with ASTM A193-B7... Tolerances The tolerances are based on EEMUA – 145.3./16 mm to 4 in. 04-Oct-12 .08 30.18 108.1 and 2.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.5 d5 mm 23 33 38 47 53 69 89 103 123 d2 in/mm 5/8 /15.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. Nominal Size in ½ ¾ 1 1¼ 1½ 2 2½ 3 4 mm 16 25 30 38 44.9 108 d1 mm 16. The backing flanges are suitable for use in both 16 and 20 bar systems. Unless otherwise specified the flanges are protected by hot dipped galvanising. The slip-on backing flanges are in accordance with EEMUA 145.8 79.9 98.5.googleusercontent.9 ¾/19 ¾/19 ¾/19 ¾/19 http://webcache. Tables 2. Additional organic coatings such as polyamide epoxy are available on request. Page 29 of 67 Composite Slip-On Flanges: Slip-On Stub Ends and Slip-On Backing Flanges Type and Construction The slip-on stub ends are in accordance with EEMUA 145. Table 2.08 38. Dimensions Dimensions are based on EEMUA -145.5 57 76.23 76.2.4 120.4 88.4. Tables 2.2 and 2. Section 2B.5 and BS 1560. Section 2A and 2B.3 69.2. Drilling and outside diameter dimensions are in accordance with ANSI B16..1 88. The chemical composition and mechanical properties of the components are in accordance with EEMUA 145.38 d3 mm 21 31 36 45 51 67 87 100 120 Inner Stub End Dimension d4 mm 40 53 60 70 80 99 120 130 158 H mm 16 16 18 18 19 19 19 21 23 h mm 5 5 5 5 5 6 6 7 7 D mm 89 98 108 117 127 152 178 190 229 b mm 14 14 14 14 14 18 18 19 24 Outer Steel Flange – Dimension K mm 60. Section 2A and are suitable for 16 and 20 pressure rating.9 5/8/15./108 mm Class 150.9 5/8 /15.4 190.6 139. Section 2A and 2B. The range of sizes covered is ½ in..9 5/8 /15.9 5/8 /15. fittings and.10 44.4.60 57.7 152.07 25.33 89. Section 2B. Page 30 of 67 KME Germany AG & Co./914 mm are in accordance with MSS SP-44. Nominal Size Outside Diameter of Flange Thickn. Table 3. of Flange Diameter of Hub Hub Dia at weld Chamfer http://webcache. Tolerances The tolerances are based on EEMUA – 145./914 mm Class 150./16 mm-24 in. The range of sizes covered is ½ in. whereas the larger sizes.. The recommended bolting is in accordance with ASTM B150 alloy UNS C63000../711 mm -36 in.2-3. Section 3. Drilling and outside diameter dimensions of flange sizes ½ in..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 28 in.5 and BS 1560./ 16 mm to 36 in.googleusercontent.. 04-Oct-12 . Dimensions Dimensions are based on EEMUA -145. Section 3. Table 3.4./610 mm are in accordance with ANSI B16. KG — OSNA ®10 Page 22 Solid Weld Neck Flanges Type and Construction The solid weld neck flanges are in accordance with EEMUA 145. fittings and. Section 3 for 16 and 20 bar systems.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.3. Other sizes are available on request. googleusercontent.. 20 Page 23 http://webcache. inside bolt circle gaskets shall be used and special care should be taken to avoid overtightening the bolting..9 368 419 457..1 88.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.2 508 610 711 813 914 mm 89 98 108 117 127 152 178 190 229 279 343 406 483 533 597 635 698 813 927 1060 1168 b mm 14 16 16 17 20 25 27 27 27 27 31 31 35 41 43 45 45 49 72 72 72 d6 mm 23 32 42 51 61 73 91 105 135 192 246 305 365 400 457 505 559 664 748 876 984 d3 mm 16 25 30 38 44.1 267 323. fittings and.5 57 76. 04-Oct-12 .2 508 610 711 813 914 It should be noted that although these flanges are flat faced.1 88.9 108 159 219.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.9 368 419 457. Page 31 of 67 D in ½ ¾ 1 1¼ 1½ 2 2½ 3 4 6 8 10 12 14 16 18 20 24 28 32 36 mm 16 25 30 38 44.1 267 323.5 57 76..9 108 159 219. 2 539.0 9.0 16 bar Approx.6 139.5 2.3 4.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.5 KME Germany AG & Co. Weight 20 bar Approx. of Hub at Welding End S1 min mm 2.7 38.2 15.0 39. fittings and.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.8 28.0 3.4 120. Page 32 of 67 Weld preparation applicable to S1 ≥ 3.3 Use 1.3 298.8 15.0 741.0 749.5 12.3 62.4 190. of Hub at Welding End S1 min mm 20 bar Thickn. 04-Oct-12 .4 362.1 611.0 Drilling 20 bar 20 bar 114.7 mm 8 7 8 8 7 9 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 K mm 60.7 453.6 86.7 2.9 98.1 6.5 3.6 247.0 4.5 7.5 5.04 1.0 13.0 17.0 1086.0 2..9 88.5 4.4 115.8 79.7 152.5 2.7 168.0 4.0 8. KG — OSNA ®10 http://webcache.0 19.8 635.0 2.72 1.0 9.0 978..5 2..5 Use 2.3 864.googleusercontent.0 15.. of Bolts h kg kg 0.3 69.0 8.0 8.0 164.5 241.5 11.8 476.1 7.1 755.0 431.1 10.0 599.4 253.5 15.0 13. Weight Parallel Length of Hub Diameter of Bolt Circle No.5 27.5 6.5 7.4 88.0 mm 16 bar Thickn.5 61.0 10.2 136.5 3.8 577.5 5.7 461.5 2.6 140. 9 108 mm 89 98 108 117 127 152 178 190 229 4 4 4 4 4 4 4 4 8 http://webcache. Nominal Size Flange Diameter D d3 mm 16. Drilling and outside diameter dimensions are in accordance with ANSI B16.60 57.2.. The range of sizes covered is ½ in. Table 4. Tolerances The tolerances are based on EEMUA – 145.3. of Diameter of Bolt Holes Bolt Holes in ½ ¾ 1 1¼ 1½ 2 2½ 3 4 mm 16 25 30 38 44..googleusercontent.07 25.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.38 Flange Thickness b mm 14 16 16 17 20 25 27 27 27 H mm 20 24 24 26 26 28 32 34 40 d6 mm 23 32 47 51 61 73 91 105 135 No.18 108..5 and BS 1560.10 44. The recommended bolting is in accordance with ASTM B150 alloy UNS C63000. Section 4. Dimensions Dimensions are based on EEMUA -145.1 88. Section 4 and are suitable for both 16 and 20 bar systems.33 89.23 76./16 mm to 4 in.08 30./108 mm Class 150. fittings and.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Table 4.5 57 76.08 38.. Section 4. Page 33 of 67 Page 24 Solid Slip-On Flanges Type and Construction The solid slip-on flanges are in accordance with EEMUA 145. 04-Oct-12 . Table 1./914 mm Class 150. http://webcache. Unless otherwise specified the flanges are protected by hot dipped galvanising.googleusercontent../16 mm to 36 in. whereas the larger sizes.. since the diameter of the copper nickel disk d1 is equivalent to the flange diameter d4 weld neck stub end in accordance with EEMUA 145. Solid blind flanges are available on request. In contrast to raised face blind flanges in accordance to ANSI B16.5. The blind flanges are suitable for use both 16 and 20 bar systems. the supplied composite flanges are considered as flat face. Page 34 of 67 22 Page 25 Composite Blind Flanges Type and Construction The composite blind flanges are in accordance with manufacturer’s specification. By these means. Section 1B. uniform contact over the weld Tolerances Tolerances are equivalent to the dimensions for weld neck backing flanges based on EEMUA 145./914 mm are in accordance with MSS SP-44.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 04-Oct-12 . Drilling and outside diameter dimensions of flange sizes ½ in./16 mm-24 in. Additional organic coatings such as polyamide epoxy are available on request.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes./711 mm -36 in. fittings and. The composite blind flanges are manufactured from forged carbon steel in accordance with ASTM A105 cladded with copper nickel disk. 28 in./610 mm are in accordance with ANSI B16.5 and BS 1560. The range of sizes covered is ½ in...5.2. Section 1A. 3 864.9 108 159 219.6 31. 04-Oct-12 ..6 139.googleusercontent..0 Diameter of Bolt Holes d2 in 5 /8 5 /8 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8 Flange Thickness mm 15.8 34. uniform contact over the weld neck stub end faces is ensured.8 635.4 362.8 577.1 41.0 19.0 978.4 28.0 19.5 57 76.9 15.9 15. Spec.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.0 1086.8 79.7 152.1 b min mm 14 14 14 14 14 18 18 19 24 27 31 38 41 45 51 52 58 71 81 95 105 Diameter of Disk d1 mm 40 50 50 70 80 99 120 130 158 212 270 320 370 430 482 530 585 685 800 905 1000 1 1 11/8 11/8 11/4 11/4 13/8 13/8 15/8 15/8 KME Germany AG & Co.0 431.2 539.6 28..2 22.9 41.8 31.4 120.9 15.9 98.9 19.4 25.4 190.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.9 15.8 476.5 241.9 34.1 267 323. The recommended bolting is in accordance with ASTM A193-B7.3 69. Page 35 of 67 By these means.1 88. Size in ½ ¾ 1 1¼ 1½ 2 2½ 3 4 6 8 10 12 14 16 18 20 24 28 32 36 Size mm 16 25 30 38 44.3 298. KG — OSNA ®10 Page 26 http://webcache.0 749.2 25.9 368 419 457.0 22. Nom.2 508 610 711 813 914 Flange Diameter D mm 89 98 108 117 127 152 178 190 229 279 343 406 483 533 597 635 698 813 927 1060 1168 K mm 60.4 88. fittings and..0 19. fittings and.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.googleusercontent. Socket Weld Fittings and Miscellaneous http://webcache.. 04-Oct-12 ... Page 36 of 67 Capillary Brazing.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.. 2 3.5 15.080 25..5 12. 04-Oct-12 .2 3.070 16. fittings and.2 3.080 30.2 E min mm 9 9.225 57.2 3.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.595 44..131 13 38.121 13 25.146 13 44.2 3.646 16 57..5 20 20 min mm 10 16.095 38.131 13 30.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.5 57 mm 3..googleusercontent. Page 37 of 67 24 Page 27 Material OSNA®-10 – CuNi 90/10 Capillary brazing end – CB Socket welding – SW Socket Welding Elbo Capillary Brazing Elbo CB SW Elbows 45° 16 mm – 57 mm CB or SW Dimensions Table 45° nominal specified C min inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.276 J min/max mm B Elbows 90° 16 mm – 57 mm CB or SW CB SW http://webcache. 225 57.2 3.. 04-Oct-12 ..Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.080 25.5 57 mm 3.095 38.121 21 25.646 52 57.2 3..googleusercontent. KG — OSNA ®10 Page 28 Socket Welding Tees Capillary Brazing Tees Equal Tees 16 mm – 57 mm CB or SW CB SW Dimensions Table Equal Tees http://webcache.2 3. Page 38 of 67 Dimensions Table 90° nominal specified C min inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.146 39. fittings and.131 33 38.2 3.595 44.080 30.2 3.070 16.5 44..276 min/max mm B KME Germany AG & Co.2 min mm 10 13 13 13 13 16 J D min mm 12 16.131 25 30.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 2 3.131 30.121 16.080 25 30.070 12 16.146 38.131 25.131 25.080 25 30.131 25.2 3.5 mm 21 25.276 57.595 52 57.2 3.225 52 57.2 3.5 44.2 3.646 44.095 39.5 57 mm 12 16.095 39.5 44.080 25 30.121 16.2 3.225 52 57.225 52 57.595 39.095 33 38.276 57.595 39.121 16.2 3..121 16.2 3.225 max/min mm B C min mm 3.595 max/min 26 Page 29 http://webcache..2 3.131 25.646 44.5 44.googleusercontent.080 25 30.5 44.595 39.070 21 25.2 min mm 10 13 13 13 13 16 J Reducing Tees 16 mm – 57 mm CB or SW CB SW Dimensions Table Reducing Tees nominal specified D min inch ¾x½ 1x½ 1x¾ 1¼ x ½ 1¼ x ¾ 1¼ x 1 1½ x ½ 1½ x ¾ 1½ x 1 1½ x 1¼ 2x½ 2x¾ 2x1 2 x 1¼ 2x1½ mm 25 x 16 30 x 16 30 x 25 38 x 16 38 x 25 38 x 30 44.5 x 30 44..2 3.5 x 25 44.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.2 3.2 3. fittings and.070 21 25.2 3.146 38..646 44.146 38.276 57.131 30.146 38.131 30.070 21 25.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.5 44.5 x 16 44.131 30.080 25 30.276 57.146 38.131 25.646 44.146 38.095 12 16.646 44.080 33 38.276 57.070 21 25.121 16.225 max/min mm B min mm 13 13 13 13 13 13 13 13 13 13 16 16 16 16 16 J C min mm 3.080 33 38.2 3.2 3.2 3.095 39. 04-Oct-12 .2 3.080 33 38.131 30.080 33 38.225 52 57.5 x 38 57 x 16 57 x 25 57 x 30 57 x 38 57 x 44.595 52 57.2 3.2 D1 min mm 12 16.080 12 16.2 3.095 33 38.646 44. Page 39 of 67 Dimensions Table Equal Tees nominal specified D min inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.5 44.131 25.080 25 30.131 30.070 21 25.080 12 16.276 57.121 16. 2 3.095 39.070 21 25.095 max/min mm B min mm 13 13 13 13 13 13 J C min mm 3.080 33 38.2 3.276 57.2 3.5 57 mm 12 16.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.146 38.646 44.2 3.121 16.146 38.146 38.595 52 57.225 max/min mm B C min mm 3.121 16.2 3. 04-Oct-12 .131 30.080 25 30.2 D1 min mm 12 16.080 max/min http://webcache.131 25...2 3.131 25.131 25.2 3.121 16.095 33 38.146 38.5 44.131 30.070 21 25.2 3.080 33 38.2 3.121 16.070 21 25. Page 40 of 67 Material OSNA®-10 – CuNi 90/10 Capillary brazing end – CB Socket welding – SW Socket Weldin Capillary Brazin CB SW Equal Couplings 29 mm – 76 mm CB or SW Dimensions Table Equal Couplings nominal specified D min inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.080 12 16.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.080 25 30.131 25.2 min mm 10 13 13 13 13 16 J Reducing Couplings 25 mm – 57 mm CB or SW CB SW Dimensions Table Reducing Couplings nominal specified D min inch ¾x½ 1x½ 1x¾ 1¼ x ½ 1¼ x ¾ 1¼ x 1 mm 25 x 16 30 x 16 30 x 25 38 x 16 38 x 25 38 x 30 mm 21 25.googleusercontent.2 3.. fittings and.070 12 16.095 33 38..131 30.080 25 30.080 25 30.131 30. 095 12 16.121 16.070 21 25.276 57.225 52 57.146 38..2 3.080 33 38.2 3.121 16.2 3.5 57 mm 12 16.5 x 25 44.080 25 30.276 57.646 44.595 52 57.276 57.5 44.225 52 57.2 12 16..225 52 57.225 max/min mm B C min mm 3.5 44.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.595 39.646 44.276 57.146 38..5 44. 04-Oct-12 .646 44.146 38.080 33 38.131 30.5 44.095 39.5 44.131 30. fittings and.5 44.131 30.2 3. Page 41 of 67 1½ x ½ 1½ x ¾ 1½ x 1 1½ x 1¼ 2x½ 2x¾ 2x1 2 x 1¼ 2x1½ 44.131 25.2 3.225 13 13 13 13 16 16 16 16 16 3.276 57.2 3.646 44.131 25.2 3.070 21 25.070 21 25.5 x 38 57 x 16 57 x 25 57 x 30 57 x 38 57 x 44. KG — OSNA ®10 Page 30 Capillary Brazing (Half)-Couplings Socket Welding (Half)-Couplings (Half)-Couplings 16 mm – 57 mm CB or SW CB SW Dimensions Table Brazing (Half)-Couplings / Socket Welding (Half)-Couplings nominal specified D min inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.2 min mm 10 13 13 13 13 16 J http://webcache.131 25.2 3.595 52 57.5 x 30 44..225 52 57.5 39.5 x 16 44.646 44.googleusercontent.595 39.595 39.2 3.2 3.121 16.080 25 30.2 3.2 3.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.646 44.2 3.276 57.080 33 38.080 25 30.595 KME Germany AG & Co.095 39. 188 0.902 1.263 0.490 0.0 17.5 18. Page 42 of 67 Couplings NPT 16 mm – 57 mm Dimensions Table Couplings NPT nominal OD L1 min inch ½ ¾ 1 1¼ 1½ 2 mm 29 35 44 57 64 76 mm 48 51 60 67 79 86 A min mm 13.273 1..Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.0 ~kg 0....com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 04-Oct-12 .701 weight 28 Page 31 Material OSNA®-10 – CuNi 90/10 Welding Ends 16 mm – 57 mm http://webcache.0 18.5 14.googleusercontent.5 19. fittings and. 3 18.0 18. Page 43 of 67 Dimensions Table Welding Ends nominal specified Thread inch ½ ¾ 1 1¼ 1½ 2 mm 21.6 1.3 26.5 39. 04-Oct-12 .6 13.4 19.9 17.3 60.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. KG — OSNA ®10 http://webcache..7 33.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.5 43.2 48..3 NPT ½ ¾ 1 1¼ 1½ 2 mm 24..0 d L2 A min mm 13.6 1.4 42.0 33..googleusercontent.6 1.6 S Coupling KME Germany AG & Co.2 mm 1.6 1. fittings and.6 1.5 30.0 25. fittings and. 04-Oct-12 ..googleusercontent...Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. Page 44 of 67 Page 32 http://webcache..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. fittings and.. Page 45 of 67 30 Page 33 Material OSNA®-10 – CuNi 90/10 Straight Male Straight Female Female Male Capillary Brazing Connector 30 16 mm – 57 mm Socket Welding Connector 30 16 mm – 57 mm Female Male http://webcache.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.googleusercontent... 04-Oct-12 . 080 1 30. Capillary Brazing x Male Thread http://webcache.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.595 2 57. KG — OSNA ®10 Page 34 Male Unions and Unions Socket Welding Unions.080 1 30.googleusercontent.646 44.2 3.2 3.2 3.2 3.. 04-Oct-12 .095 1½ 44.646 44.080 1¼ 38.3 32.2 3.121 16.146 38.9 24.121 16..225 d max/min mm B C min mm 3.276 57.5 38.131 30..595 2 57.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.070 ¾ 25.080 1¼ 38. Male Unions.2 D KME Germany AG & Co.1 49.131 25.2 3.8 18. Socket Welding x Male Thread.2 3.2 3. Page 46 of 67 Dimensions Table Female nominal specified Thread inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.225 A max/min mm B C min mm 3.5 57 NPT ½ 16.2 mm 32 33 37 38 38 42 L1 Dimensions Table Male nominal specified Thread inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.131 25.5 57 NPT ½ 16.276 57.131 30.2 3. fittings and..2 3.2 mm 13.095 1½ 44.070 ¾ 25. Capillary Brazing Unions.146 38. 080 3.5 100.5 86.0 mm 58 71 72.5 80.googleusercontent.0 25.5 91.646 44.225 max/min mm B D min mm 12.2 38. fittings and.2 44.5 mm 38 45 46.0 33.121 16.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.646 44.5 57 mm 3.0 21.0 33.595 3.095 3..5 73.0 25.2 57.2 57.5 x 1½ 57 x 2 NPT ¾ 1 1¼ 1½ 1½ 2 d C min mm 3.276 57.5 mm 36 46 50 60 70 85 L L3 A/F http://webcache.131 25.0 39.5 52.5 mm 56 68 70.225 max/min mm B D min mm 12.2 16.2 30.146 38. Page 47 of 67 Capillary Brazing x Male Thread Male Unions 25 mm – 57 mm CB or SW CB SW Dimensions Table Male Unions nominal specified Thread inch ½ ¾ 1 1¼ 1½ 2 mm 16 x ¾ 25 x 1 30 x 1¼ 38 x 1½ 44.0 21.5 91.5 54.5 75..121 16.146 38.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. 04-Oct-12 .131 25.0 39.070 3.5 59.131 30.5 52.0 mm 66 81 83.2 25.276 57.595 3.080 3.5 L1 L4 Unions 25 mm – 57 mm CB or SW CB SW Dimensions Table Unions nominal specified C min inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.2 44..131 30.080 3.5 78.095 3.5 49.2 38..2 16.070 3.5 84.2 25.2 30.080 3. 5 44.0 19.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.299 0.387 0.5 20.5 51 51 51 51 51 ~kg 0.181 0. Head weight mm 5 6 6 6 6 6 7 7 7 7 8 8 8 8 8 mm 22 27 27 35 35 35 44.5 20.5 20.167 0.0 16.5 20. Page 48 of 67 32 Page 35 Material OSNA®-10 – CuNi 90/10 Hex. 04-Oct-12 .5 20..5 20.260 0.. Head and Flush Bushings 16 mm – 57 mm Dimensions Table nominal size inch ½ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ Thread D NPT ½ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ Thread d NPT ¼ ¼ 3/8 A min mm 14.082 0.428 0.5 44.5 H A/F Hex.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.150 0. fittings and.0 20.048 0.331 ¼ 3/8 ½ ¼ 3/8 ½ ¾ ¼ 3/8 ½ ¾ 1 http://webcache.333 0.googleusercontent.094 0.5 20.0 19.463 0.0 19.5 16.447 0.5 44. Head and Flush Hex...5 20.318 0. fittings and...Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.0 22.799 0.0 22.5 63.716 0.5 63.432 ½ ¾ 1 1¼ 1½ KME Germany AG & Co.5 0.0 8 9 9 9 9 9 9 9 51 63.782 0.0 22.5 63.0 22..655 0.761 0.534 0.331 0.5 22.googleusercontent. Page 49 of 67 1½ 2 2 2 2 2 2 2 1½ 2 2 2 2 2 2 2 1 ¼ 3/8 20.0 22..5 63.0 22.5 63.5 63. KG — OSNA ®10 Page 36 Sprinkler Bushing Sprinkler Bushing 25 mm – 57 mm http://webcache.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 04-Oct-12 . 570 44.990 44.200 57.5 60 41 47..070 37.055 29.975 38.120 30..googleusercontent.5 60 47.980 30.490 57.490 57.990 44.031 24..5 57 38 44.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.200 57.070 37.200 57.055 29.5 57 30 38 44.5 60 60 J K 34 http://webcache.570 44.200 57.490 57. Page 50 of 67 Dimensions Table nominal specified max/min inch ¾ 1 1¼ 1½ 2 1 1¼ 1½ 2 1¼ 1½ 2 1½ 2 2 mm 25 30 38 44.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. 04-Oct-12 .200 57.5 57 44.990 44.975 38.5 57 57 25.120 38..120 44.120 57.120 mm B A min mm 14 14 14 14 17 14 14 14 17 14 14 17 14 17 17 min mm 13 13 13 13 16 13 13 13 16 13 13 16 13 16 16 mm 28 33 41 47.070 37.5 60 33 41 47.490 57.570 44. fittings and.570 44. googleusercontent.965 mm 24 24 28 30 33 .16/20 bar Nominal Branch Size d NPT inch ½ ¾ 1 1¼ 1½ 2 mm 16 .33.22 mm 14. 04-Oct-12 .8 ..8 .38 mm 13.965 38 .57/2" .0 53.0 .88 24.8 .965/38" x 16/½" .965 57 .com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. fittings and.5 Header Size Ranges L Nom D Nom Nom K http://webcache.965 25 .14 49.84 18.965 30 ...0 21.0 34.5 53.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.30 32..21.965 44.8 . Page 51 of 67 Page 37 Material OSNA®-10 – CuNi 90/10 Threadolets 16 mm – 57 mm Dimensions Table Threadolets 16/½" .59.34 34 .5 .50 38.0 .0 26.42.26.59. Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.620 .445 12.965 57 .17 23 20.3 ..570 34.58 http://webcache. fittings and. 04-Oct-12 .565 . KG — OSNA ®10 Page 38 Sockolets Sockolets 16 mm – 57 mm Dimensions Table Sockolets 16/½" .5 .490 ...555 31 .990 .700 53.965 Header Size Nom mm L max/min mm D Nom mm 18 11.965 25 .965 38 .33.475 .40 32 38.8 .445 26 .40.52.26 26 24.8 .57/2" .070 41.16/20 bar Branch Specified OD Ranges mm 16 25 30 38 44. Page 52 of 67 KME Germany AG & Co..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.965 44.965 30 .21.25.12.575 .5 57 mm 16 .31 29 32.45 36 51.googleusercontent.965/38" x 16/½" .8 . .com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.. fittings and. Page 53 of 67 36 Page 39 Material OSNA®-10 – CuNi 90/10 Capillary brazing end – CB Socket welding – SW Socket Weldin Capillary Brazin End Caps 16 mm – 57 mm CB SW http://webcache.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes..googleusercontent.. 04-Oct-12 . Page 54 of 67 CB or SW NPT End Caps 16 mm – 57 mm Dimensions Table nominal specified OD min inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44...5 6.646 44.080 44 30..146 38. 04-Oct-12 ..095 64 44.080 57 38.5 52 min mm 32 37 38 41 41 42 L P min mm 6.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.5 6.131 30.5 57 mm 29 16.225 max/min mm B D min mm 12 21 25 33 39.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.131 25.googleusercontent.5 6.276 57.5 min mm 10 13 13 13 13 16 J http://webcache. fittings and.070 35 25.5 6.5 6.595 76 57.121 16. 4 42.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.064 t weight Male Nipple both 21.35 6.6 13.googleusercontent.163 0.35 7.7 33.3 mm – 60.280 0.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.3 Thread NPT ½ ¾ 1 1¼ 1½ 2 mm 48 51 60 67 79 86 d L A min mm 13.14 8.3 mm Dimensions Table Barrel Nipples nominal B specified inch ½ ¾ 1 1¼ 1½ 2 mm 21.0 18.56 6.78 5.635 1.2 mm 4.2 48.103 0..3 mm http://webcache. Page 55 of 67 KME Germany AG & Co. 04-Oct-12 . KG — OSNA ®10 Page 40 Barrel Nipples/Male Nipple both Barrel Nipple 21.3 60..3 mm – 60.74 ~kg 0.9 17.3 26..3 18..4 19. fittings and.415 0. 35 7.6 13.6 101.3 18.2 48.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.0 18.4 19.3 mm Dimensions Table Male Nipple one nominal B specified Thread d L1 min A min t http://webcache.0 18.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:...35 6. fittings and.3 Thread NPT ½ ¾ 1 1¼ 1½ 2 ½ ¾ 1 1¼ 1½ 2 d L1 min mm 76.2 48.googleusercontent.3 26.3 18.78 5. 04-Oct-12 .2 76..9 17.2 mm 4..2 76.3 26.56 6.4 19.9 17.6 101.2 76.4 42.6 101.2 76.3 mm – 60.3 60.78 5.6 A min mm 13.3 60.35 6.2 101.56 6.6 101.74 4.14 8.6 13.35 7.14 8.6 101.4 42.2 76.2 13.74 t 38 Page 41 Material OSNA®-10 – CuNi 90/10 Male Nipple one 21.7 33.7 33.3 21. Page 56 of 67 Dimensions Table Male Nipple both nominal B specified inch ½ ¾ 1 1¼ 1½ 2 ½ ¾ 1 1¼ 1½ 2 mm 21. 2 76.35 7.4 19.2 48.2 mm 4.6 101.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.6 13.2 76.3 18. Page 57 of 67 specified inch ½ ¾ 1 1¼ 1½ 2 ½ ¾ 1 1¼ 1½ 2 mm 21.. KG — OSNA ®10 Page 42 Female/Male Adaptor http://webcache..35 6.3 18. fittings and.2 48.2 76.3 Thread NPT ½ ¾ 1 1¼ 1½ 2 ½ ¾ 1 1¼ 1½ 2 min mm 76.4 42.6 101.14 8.2 101.74 4.7 33.6 101.2 76.9 17.2 76.56 6.78 5.78 5.3 60.3 26.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.6 13.35 7.3 26.6 101.14 8.0 18.6 101.35 6.4 42.googleusercontent.7 33. 04-Oct-12 .74 KME Germany AG & Co.6 min mm 13.3 21.56 6.3 60.2 13.4 19.9 17..0 18.. .0 18.975 1¼ 38.120 d max/min mm B D min mm 12 21 25 33 39.490 2 57.570 44.965 ¾ 25.2 L min mm 44 50 56 58 61 67 http://webcache. 04-Oct-12 .googleusercontent.5 38.200 57.045 15.975 1 30.990 1½ 44.9 24.1 49. fittings and.5 52 L min mm 36 39 43 44 44 48 Male End Adapter 16 mm – 57 mm Dimensions Table Male Adaptor nominal specified Thread inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44.200 57.570 44.070 37.055 29.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.055 24.055 29.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.975 1 30.975 1¼ 38.965 ¾ 25.045 15. Page 58 of 67 Female/Male Adaptor Female End Adapter 16 mm – 57 mm Dimensions Table Female Adaptor nominal specified Thread inch ½ ¾ 1 1¼ 1½ 2 mm 16 25 30 38 44..3 32.120 d max/min mm B D min mm 12.490 2 57..070 37.990 1½ 44.5 57 NPT ½ 16.5 57 NPT ½ 16.055 24.. Plug 21.3 mm – 60.3 mm – 60. Round and Square H Hex..googleusercontent.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.3 mm – 60...3 mm http://webcache. 04-Oct-12 .com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. Page 59 of 67 40 Page 43 Material OSNA®-10 – CuNi 90/10 Hex.3 mm Square Plug 21.3 mm Round Plug 21. fittings and... 5 20.5 16..0 Width of flats Width of flats A/F min mm 22 27 36 44.5 33. Paddle Spacer Figure 8 Blank http://webcache.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.5 22.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.0 20..googleusercontent. 04-Oct-12 . Page 60 of 67 Dimensions Table nominal size= Length Thread d NPT inch ½ ¾ 1 1¼ 1½ 2 A min mm 14. fittings and..0 20.5 A/F 1 min mm 14.5 16. KG — OSNA ®10 Page 44 Figure 8 Blanks.5 Hex height Height of square H min mm 8 10 10 14 16 17 H1 min mm 10 11 13 14 16 17 KME Germany AG & Co.5 51 63.0 19.0 28.5 24.. Paddle Blanks. 2 25.4 149.50 mm 60.0 22.0 16.4 158.80 50.1 107.1 638.8 79.0 19.93 309.4 184.3 298.00 21.00 399.0 252.20 mm 4.7 448.9 101.0 19.9 7.4 362.9 178.6 139.0 16.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.0 16.3 20.8 476.8 1107.20 76.8 1021.70 635.3 1434.7 282.4 119..10 38.50 486.53 52.60 511.23 84.3 119.9 139.84 438.60 580.4 88.3 69.5 241.2 14.6 7.4 28.7 152.5 317.9 30.9 139.9 D E L L1 W t Bd Figure 8 Blanks 684. 04-Oct-12 .6 31.3 120.8 mm 100.10 255.4 101. fittings and.4 25.6 28.9 129..3 114.8 34.95 107.38 210.0 749.50 584.80 63.0 19..4 219.6 23.5 208.8 906..30 743.10 38.65 863.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.0 16.2 mm 16.3 568.00 33.03 39.7 378.0 19.9 98.2 539.4 190.9 7.13 152.6 4.0 431.10 50.2 17.16 71.50 63.9 7.2 22.6 4.08 102.00 25.4 348.8 139.0 219.9 7.googleusercontent.8 577.3 42 http://webcache.4 120.10 38.74 351.9 26.95 mm 38.6 259.9 34.50 76.9 11. Page 61 of 67 Paddle Blank Paddle Spacer Dimensions Table nominal dimension inch ½ ¾ 1 1¼ 1½ 2 2½ 3 4 6 8 10 12 14 16 18 20 24 outside diameter B mm 40 50 60 70 80 99 120 130 158 212 270 320 370 430 482 530 585 685 mm 12.5 453.2 14.4 682.10 38.0 801.2 mm 110.8 31.0 1220.6 20. .googleusercontent.. 04-Oct-12 .. Page 62 of 67 Page 45 Material OSNA®-10 – CuNi 90/10 http://webcache. fittings and.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.. KG — OSNA ®10 Page 46 Appendix A Pressure/temperature ratings of flanges Type of Flange Size Range Maximum Allowable Working Pressure-bar 16 bar system 38°C Composite weld neck (section 1) ½ in/16 mm to 4 in/108 mm 6 in/159 mm to 36 in/914 mm Composite slip-on (section 2) Solid weld neck (section 3) ½ in/16 mm to 4 in/108 mm ½ in/16 mm to 4 in/108 mm 6 in/159 mm to 36 in/914 mm Solid slip-on (section 4) ½ in/16 mm to 4 in/108 mm see 20 bar system 20 19.7 20 19.0 16.7 16..7 50°C 75°C 100°C 38°C 20 20 bar system 50°C 19. fittings and.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.googleusercontent.0 15.7 20 19.0 16.7 16. 04-Oct-12 . Page 63 of 67 KME Germany AG & Co..0 15..7 see 20 bar system Surface finish of the copper-nickel stub end and flangejoint faces Method of machining Ra* µm Rz* µm http://webcache.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.0 16..7 see 20 bar system 20 19.7 see 20 bar system 20 19.0 16. 7 20 19.5 min. Pressure/temperature ratings ..googleusercontent.512 40. 04-Oct-12 .7 Mechanical Properties Tensile Strength N/mm 2 min. Seamless Pipes Seam-welded pipes Weld neck and slip-on stub ends. 12.0 15..229 0.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. Page 64 of 67 machining min. 12.5 µm max.229 15. 380 min.7 16.0 16. 43.115 105 105 105 15. solid weld neck and slip-on flanges Fittings 280 40..Copper-Nickel Seawater Piping Systems Offshore product range: Pipes. fittings and.611 105 15.7 50°C use 20 bar 75°C 100°C 38°C 20 20 bar rating 50°C 19.611 PSI max.2 µm max. turning 3.229 300 280 280 max.0 16. 55.7 20 19.2 % Proof Stress N/mm 2 PSI * Determined on finished tube outside of heat affected zone 44 Page 47 Appendix B http://webcache.229 15. 50 Note The term "turning" includes any method of machining producing concentric or spiral grooves.fittings Type of Fitting Size Range Maximum Allowable Working Pressure-bar 16 bar rating 38°C Butt welding fittings 1 in/30 mm to 4 in/108 mm 6 in/159 mm to 36 in/914 mm Socket weld fittings Capillary brazed fittings ½ in/16 mm to 2 in/57 mm ½ in/16 mm to 2 in/57 mm use 20 bar 20 19.. 7 0.6 & 1.googleusercontent.91 51. 1.09 9 6.1 17. Page 65 of 67 Temperature Range Thermal Expansion Coefficient Young´s Modulus Modulus of Rigidity Poisson´s Ratio Density Thermal Conductivity Specific Heat Capacitiy Electrical Conductivity Electrical Resistivity SI Units 10-16/°K kN/mm 2 kN/mm 2 g/cm3 W/m°K kJ/kg°K MegaSiemens/cm microhm-cm US Costomary Units 10-16/°K ksi ksi pound/inch3 Btu/pound °F BTU/pound °F %IACS circular mil ohm/foot 20°C 68°C 100°C 16..4.35 8.053 19.9) end caps (see table 1.E .9 0.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:.. 04-Oct-12 .800 118 0.36 60..015 D 0 -0 overall lenght h1 + h2 reducer (see table 1.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.8) http://webcache.321 29. fittings and.8 Appendix C Adjust the description of dimensions to the images Size 90 deg & 45 deg elbows & tees (see tables 1.377 0.2 34.110 200°C 124 18.4 212°C 9. C & M up to and including 267 323.12 115.7) Specified OD centre-to-end dimension D.9 up to and including 711 813 up to and including 914 ±2 ±3 ±5 overall lenght H ±2 ±3 ±5 +0.0 0.000 50 0.. com info-maritime@kme. fittings and.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes..O.googleusercontent.marine-applications. 04-Oct-12 . Box 3320 49023 OSNABRмCK Klosterstraпe 29 49074 OSNABRмCK GERMANY Fon +49 541 321-3011 Fax +49 541 321-3020 www....com http://webcache. KG Marine Applications P.com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:. KG — OSNA ®10 Page 48 KME Germany AG & Co. Page 66 of 67 KME Germany AG & Co. Owing to limitations in printing technology. 0511..com/search?hl=en-IN&q=cache:dHUuS8mYuFAJ:..005. fittings and.googleusercontent. 04-Oct-12 . Page 67 of 67 ® = registered trademark All changes reserved.Copper-Nickel Seawater Piping Systems Offshore product range: Pipes.. the colours reproduced in this brochure should be regarded as approximate equivalents to the colours described.0108 http://webcache..