What is this?This document outlines the course content for CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3) and details all labs and activities, including hands-on labs, Packet Tracer activities, media activities, simulations, games, NETLAB-friendly lab activities, and Supplemental PT Activities. Why do I want this document? This document is intended to show instructors how each chapter's labs and activities integrate into the course content, an assist instructors in planning how students can complete those activities within the time constraints of their course offerin An instructor might use this as a resource while creating weekly lesson plans. For example, an instructor will make decis on when to provide direct instruction; and will plan when and where students will complete labs and activities both in clas and outside of class. How is this document structured? There is a worksheet for each chapter of this course which provides an outline of the chapter content and how the activiti are placed within that content. There are tabs for each course chapter. Each tab outlines the chapter and details all labs and activities. The details of ea lab or activity include its page within the course, the type of activity, the learning objectives, and equipment needed to complete the lab. How do I display specific types of activities for a chapter? Each column contains an AutoFilter dropdown list. • Selecting (NonBlanks) in the Activity/Lab column will display all of the labs and activities for that chapter. • Additional filters can be use to display only the Hands-on Labs, PT Activities, Media Activities, Linksys GUI activities, an Lab Activities. What are the different types of Packet Tracer activities? There are three types of PT activities included in the course: • PT Activity: Skills Practice -- These e-doing activities guide students through a specific skillset, providing just-in-time sk reinforcement and practice. • PT Activity: Companion to Hands-on Lab -- These activities may be used in conjunction with hands-on labs. • PT Activity: Skills Integration Challenge -- These summary activities provide a skills integration challenge which build up skills learned in this chapter and in previous chapters. • Supplemental PT Activities -- These activities complement the CCNA Discovery and CCNA Exploration curricula and utilize technologies new to PT with the release of PT5.0 including activities demonstrating OSPF, IPv6, SSH, RSTP, Spanning Tree, VLANs, and Frame Relay. It is important to note that Packet Tracer was not designed to replace the use of physical equipment in a classroom. Pack Tracer is more than a network lab simulator, providing many other opportunities for instruction and learning. Medium Business or ISP er activities, media activities, rate into the course content, and to nstraints of their course offering. e, an instructor will make decisions labs and activities both in class ter content and how the activities and activities. The details of each and equipment needed to or that chapter. ities, Linksys GUI activities, and E- illset, providing just-in-time skills with hands-on labs. ration challenge which build upon CNA Exploration curricula and OSPF, IPv6, SSH, RSTP, quipment in a classroom. Packet tion and learning. Supplemental PT 5.0 activities that complement the CCNA Discovery and CCNA Exploration curricula are available for downloa Tracer resource page, including activities demonstrating OSPF, IPv6, SSH, RSTP, Spanning Tree, VLANs, and Frame Relay. These supplemental activities can be downloaded from the Packet Tracer resource page on Academy Connection. To access t Academy Connection and click the Packet Tracer graphic on the left of the page, then select the appropriate download package PT Activity PT files word files Objectives Troubleshooting • Use various tools and show OSPFFR_troubleshooti OSPFFR_troubleshooti OSPF Framecommands to troubleshoot ng.pka ng.doc Relay connectivity issues. Configuring IPv6 IPV6 RIP.pka RIP IPV6 RIP.doc • Enable IPv6 Unicast Routing. • Configure IPv6 addresses. • Enable RIPng on appropirate interfaces. • Verify the IPv6 configuration. Configuring SSH Configuring SSH.pka Configuring SSH.doc • View the default internetwork configuration. • Enable SSH. • Interconnect using SSH. Configuring RSTP • View the default Layer 2 configuration. Configuring RSTP.pka Configuring RSTP.doc • Enable RSTP. • Configure primary and secondary root bridges. • View the default configuration of the spanning tree protocol. • Select and enable the root bridge. • Enable portfast on ports connected directly to host devices • View how these configurations change the way in which traffic is forwarded. Configuring STP Configuring_STP.pka Configuring STP.doc Configuring InterVlan Routing with Multilayer Switch Configuring Frame-Relay Configuring Etherchannel • View the default Layer 2 configuration. Configuring InterVLAN Configuring InterVLAN • Configure the switch virtual Routing.pka Routing.doc interfaces (SVIs). • Verify inter-VLAN routing. • View the default internetwork configuration. • Configure Frame Relay Configuring Frame Configuring Frame connectivity. Relay.pka Relay.doc • Configure Static and Default routing. • Verify connectivity. • View the default Layer 2 EtherChannel.pka EtherChannel.doc configuration. • Configure EtherChannel. Configuring Port Port Security.pka Security Port Security.doc • View the default Layer 2 configuration. • Configure port security. MU_RIP_instructor.pkt MU_RIP_Peer0.pkt MU_RIP_Peer1.pkt MU_ACL_Requirement MultiUser_RIP_ MU_RIP_Peer2.pkt s.doc Configuration MU_RIP_Peer3.pkt MU_ACL_Solution.doc MU_RIP_Peer4.pkt MU_RIP_Peer5.pkt oration curricula are available for download from the Packet panning Tree, VLANs, and Frame Relay. age on Academy Connection. To access this page, log in to n select the appropriate download package for your needs. Connections to CCNA Discovery Courses CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0.3.0) 9.3.3 OSPF Issues CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0) 8.2.5 Troubleshooting Frame Relay Operation Connections to CCNA Exploration Courses CCNA Exploration: Routing Protocols and Concepts (E2 v4.0.4) 11.6 OSPF Configuration Labs CCNA Exploration: Accessing the WAN (E4 v4.0.2) 3.4.3 Troubleshooting Frame Relay Configuration CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0) 6.3.3 Implementing IPv6 on a Cisco Device CCNA Exploration: Accessing the WAN (E4 v4.0.2) 7.3.9 Verifying and Troubleshooting RIPng CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2) CCNA Discovery: Working at a Small-to-Medium 2.4.3 Configure Telnet and SSH Business or ISP (D2 v4.1.3.0) 9.5.3 Using Telnet to Check Upper Layer CCNA Exploration: Accessing the WAN (E4 Connectivity v4.0.2) 4.2.4 Securing Remote Administrative Access to Routers CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0) 7.3.3 Validating Device and Topology Selection CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2) 5.4 PVST+, RSTP and Rapid-PVST+ CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0.3.0) 3.2 Preventing Switching Loops CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2) 5.2.5 STP Port States and BPDU Timers 4.1.2.4.0.0) 8.0.4 Connecting the LAN Switch to the Router CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0) 8.0.3 Real-world Redundancy Issues CCNA Discovery: Working at a Small-to-Medium Business or ISP (D2 v4.1.0) 1.4.2.3.2 Configuring Frame Relay CCNA Exploration: LAN Switching and Wireless (E3 v4.0.CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0) 1.2) 2.0.2.3.0.4 Prototyping the WAN CCNA Exploration: Accessing the WAN (E4 v4.4 Configuring Extended ACLs .3.0) 5.1.3.0.0) 3.3.3 Inter-VLAN Routing CCNA Exploration: LAN Switching and Wireless (E3 v4.6 Configuring Port Security CCNA Exploration: Accessing the WAN (E4 v4.0.2.2) 5.4 Traffic Filtering at the Distribution Layer CCNA Exploration: LAN Switching and Wireless (E3 v4.0) 3.4.2 Challenge Inter-VLAN Routing CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.3.5.2) 6.3.2) 5.0.0.4 Switch Security CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.2) 3.4 Configuring Numbered Extended ACLs CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.6 Security Measures CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4. page 7 of 56 June 2007 .0.2.2 Roles and Responsibilities within an ISP Roles and 1. • Draw a diagram of the traceroute path.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.3 Using Tools to Map the Internet Use traceroute to check ISP connectivity through the Internet. Mapping ISP Lab 1.3 ISP Connectivity ELO: 1.pdf Requirements Identify appropriate equipment to meet the business needs of ISP customers. 1.2. Drag the role to its defined description.3 1. including IP addresses for each device.3. Interpret the output of ping and traceroute. After reading ISP and ISP not applicable the scenario.2 Internet Hierarchy ELO: 1.3 Mapping • Interpret the traceroute output to determine which ISPs the packets Hands-on Lab Connectivity Using ISP Connectivity passed through on their way from the local host to the destination Traceroute Using Traceroute website.3.1.2.2.1 The Internet and Standards ELO: 1.2 ISPs ELO: 1.1 ISP Requirements Identifying PT Activity: Equipment to Meet 1.4 Interpreting Ping PT Activity: and Traceroute Skills Practice Output TLO: 1.3.1.1(3) Chapter 1: The Internet and Its Uses TLO: 1. TLO: 1.0 Chapter Introduction ELO: 1. place a check in the box that would be the most 1. 1.1 Delivering Internet Services to End Users ELO: 1. • Add new equipment to accommodate expansion and allow for future growth. showing the routers and ISP clouds passed through from the local host to the destination website.2 Media Activity Services appropriate ISP for each user.1.2. • Compare the trade-off between cost and flexibility.2 ISP and ISP Services Match the requirements of a end-user to various ISPs.3. • Distinguish the difference between successful and unsuccessful ping attempts. • Select the appropriate interface cards for the needs and budget of an organization.2.2.3.1.3.3.1 What is the Internet? ELO: 1.3 Media Activity Responsibilities not applicable within an ISP Match the ISP role to its responsibility.3 DsmbISP_v40_ActivityMap ELO: 1.2. • Run the Windows tracert utility from a local host computer to a website on a different continent. • Distinguish the difference between successful and unsuccessful traceroute attempts.3_printableSkills Practice Customer instructions.1 Introduction TLO: 1.1. 1 Quiz DsmbISP_v40_ActivityMap June 2007 page 8 of 56 .5 Chapter Quiz ELO: 1.5.1 Summary TLO: 1.4.4 Chapter Summary ELO: 1.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives TLO: 1. Equipment Needed • Host computer with the Windows operating system • Access to the command prompt • Internet connection • Routes Traced worksheet for each destination URL. Each student completes their own worksheets and gives them to the instructor. which is attached at the end of this lab • Access to the PC command prompt DsmbISP_v40_ActivityMap June 2007 page 9 of 56 . • Global Connectivity Map. The worksheet is attached to this lab. Equipment Needed DsmbISP_v40_ActivityMap June 2007 page 10 of 56 . 5.1 Help Desk Troubleshooting Scenarios 2.3.1 Help Desk Technicians ELO: 2.4 Media Activity Protocols and Technologies ELO: 2.5 Media Activity Troubleshooting the OSI Model not applicable Identify the layer to which the protocol or technology belongs. or Layers 5-7. select the appropriate item.4.2. For each statement.3.1 Using the OSI Model ELO: 2.1 Quiz DsmbISP_v40_ActivityMap June 2007 page 11 of 56 .3 Media Activity each task. select the appropriate technician.3 Troubleshooting the OSI Model 2.1.3 Customer Site Procedures TLO: 2. Based on the scenario.2 Creating and Using Help Desk Records ELO: 2.1.1 Summary TLO: 2.3 ISP Troubleshooting ELO: 2. • Diagnose a network connectivity issue. For each Protocol or Technology displayed. For not applicable 2.2. • Implement a proposed solution to restore network connectivity.2.1 Introduction TLO: 2. Technicians ELO: 2.2. click the appropriate layer.4 Media Activity Interacting with Customers not applicable Examine each statement and decide to which part of the customer support process it belongs.1 ISP Help Desk Organization ELO: 2.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1. TLO: 2.2. ELO: 2.5 Chapter Quiz ELO: 2.3 Interacting with Customers 2. check the appropriate Layer.3.2.1(3) Chapter 2: Help Desk TLO: 2.0.2. TLO: 2.3.4 Chapter Summary ELO: 2. Layer 4. Layer 3.2 Roles of ISP Technicians Roles of ISP Identify the responsibilities of each level of network technician.2 OSI Model ELO: 2.0 Chapter Introduction ELO: 2.3.1.1.3. Identify if a network issue occurs at Layer 1. Layer 2.1.4 Troubleshooting PT Activity: and Resolving Skills Practice Network Issues not applicable Troubleshoot and resolve a network connectivity issue.2 OSI Model Protocols and Technologies OSI Model not applicable 2. Equipment Needed DsmbISP_v40_ActivityMap June 2007 page 12 of 56 . 1 Introduction TLO: 3.3 Network Requirements Documentation Create a logical and physical network diagram.4 Media Activity not applicable Evaluation phase. PT Activity: Creating Network 3. ELO: 3.5 Network Equipment Upgrades ELO: 3. and interconnect the devices.3 Purchasing and Maintaining Equipment ELO: 3. • Add the correct modules and interfaces to the ISR and the router. • Propose a cable upgrade plan to accommodate extra floor space.2. Implementation.2_printable.4 Selecting Internetworking Devices Exploring PT Activity: Internetworking Skills Practice Devices 3.1.2.1. Skills Practice Diagrams instructions.3 not applicable DsmbISP_v40_ActivityMap ELO: 3.3 Selecting LAN Devices Exploring Different PT Activity: LAN Switch not applicable Skills Practice Options Explore different LAN switch options.3. 3.0.pdf • Create a logical topology diagram. Network Upgrade Selection and Design.• Investigate the customer network. • Describe the different options available on an ISR and a router.4.1 Purchasing Equipment ELO: 3.3.2. • Determine which options provide the needed connectivity.2. • Determine the cable types to use to connect all devices to the switch. Based on the statement.3.3.3 Cabling Considerations ELO: 3.3. TLO: 3.1 Network Upgrade Planning Phases Determine if an action is part of the Requirements Gathering.2 Physical and Logical Topologies ELO: 3.1.2.3.1(3) Chapter 3: Planning a Network Upgrade TLO: 3. • Add appropriate modules to switches and routers. 3.6 Design Considerations June 2007 page 13 of 56 . select appropriate Planning Phases phase.3.1.2 • Create a network inventory list. 3.1 Site Survey ELO: 3. or Review and 3.2.1.4 Structured Cable Evaluating a Hands-on Lab Cabling Upgrade Plan Lab 3.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.2 Physical Environment ELO: 3.2 Evaluating a Cabling Upgrade Plan Evaluate a floor plan and propose upgrades to accommodate extra floor space.2 Planning ELO: 3. • Examine the existing floor plan of a customer. Operation.4.3.3.3.1 Documenting the Existing Network ELO: 3. Explore different internetworking device options.0 Chapter Introduction ELO: 3.3.2 TLO: 3.4 ELO: 3. • Connect the devices to the switch using the appropriate cable types.2 Selecting Network Devices ELO: 3.2.1.4. 4.5 Chapter Quiz ELO: 3.4 Chapter Summary ELO: 3.1 Summary TLO: 3.1 Quiz DsmbISP_v40_ActivityMap June 2007 page 14 of 56 .5.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives TLO: 3. Equipment Needed Existing Floor Plan (provided in lab) DsmbISP_v40_ActivityMap June 2007 page 15 of 56 . Equipment Needed DsmbISP_v40_ActivityMap June 2007 page 16 of 56 . 2 IP NAT Terms 4.1.2.1 Introduction TLO: 4.3.1.1 IP Addressing in the LAN ELO: 4. Create an IP addressing scheme for a small network. Enter the binary and decimal values of each octet in the spaces provided.5.5.3 TLO: 4.2 Subnetting a Network ELO: 4.5 Communicating Between Subnets 4. 4.1 Review of IP Addresses ELO: 4.4 Port-based Network Address Translation (PAT) Examine the contents of the IP header as traffic crosses the NAT border.4 Media Activity Custom Subnet Masks not applicable Determine the network ID of each IP address. DsmbISP_v40_ActivityMap June 2007 page 17 of 56 .2 Media Activity IP NAT Terms not applicable Match the NAT address terminology to the source and destination of the datagram.2 PT Activity: Communicating Companion to Between Subnets Hands-on Lab Hands-on Lab Subnetting a Network not applicable Lab 4.2. • Assign host addresses to devices.1(3) Chapter 4: Planning the Addressing Structure TLO: 4.4 VLSM and Classless Inter-Domain Routing (CIDR) ELO: 4.3.1.5 Implementing an IP PT Activity: not applicable Addressing Skills Practice Scheme ELO: 4. • Subnet an address space based on host requirements. Drag and drop the Inside and Outside options to the correct Address Type.2 NAT and PAT ELO: 4. Describe how hosts on separate subnets communicate to share resources. • Verify the addressing configuration.2.3.0.1.5 Subnetting a Network Modify the addresses.0 Chapter Introduction ELO: 4.2.3 Custom Subnet Masks 4.1.3 Static and Dynamic NAT Examining PT Activity: 4.1.2. subnet masks and device default gateways to enable routing between subnets. 4.3 Network Address not applicable Skills Practice Translation (NAT) ELO: 4.1.1 Basic Network Address Translation (NAT) ELO: 4.1.1.2. Subnet a network to meet the requirements of multiple LANs. ELO: 4.1.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4. • Configure devices with IP addressing.2. • Explain the active network connections open on a computer when viewing a particular web page.2.5 IP NAT Issues TLO: 4.2. ELO: 4.3.4 Chapter Quiz ELO: 4.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives 4. • Determine what an internal IP address and port number are translated to using port address translation (PAT).4.4 Determining PAT Translations Determine the number of port address translations being performed.2.1 Quiz DsmbISP_v40_ActivityMap June 2007 page 18 of 56 .3 Chapter Summary ELO: 4.3 Hands-on Lab Determining PAT Translations Lab 4.4.1 Summary TLO: 4. Equipment Needed Pencil and paper DsmbISP_v40_ActivityMap June 2007 page 19 of 56 . DsmbISP_v40_ActivityMap June 2007 page 20 of 56 .Equipment Needed • Computer running Windows XP Professional • Connection to a gateway router or an ISR using PAT • Internet connection • Access to the PC command prompt. 1 Cisco SDM Express ELO: 5. Drag the Configuration Parameter to the information that must be entered.2.2 Physical Setup of the ISR ELO: 5. with SDM Express with SDM Express • Configure LAN and Internet connections on a Cisco ISR using Cisco SDM Express. and Configuring an ISR Hands-on Lab Configuring an ISR login passwords – using Cisco SDM Express. ELO: 5.5 ELO: 5.3 Powering • Configure HyperTerminal so that the computer can communicate with the router and observe the router startup sequence.3 • Configure basic router global settings – router name. Hands-on Lab Integrated Services Up an Integrated • Display router configuration information using the show runningRouter Services Router config and show startup-config commands and restart the router using the reload command. • Connect a computer to the router console interface.0 Chapter Introduction ELO: 5. check CLI or SDM. Powering Up an Lab 5.1.1.2 SDM Express Configuration Options SDM Express not applicable 5.1.1.1 Introduction TLO: 5. Identify the configuration parameters from the SDM Express.1 Initial ISR Router Configuration ELO: 5.2.5 Media Activity Programs TLO: 5.3.1(3) Chapter 5: Configuring Network Devices TLO: 5.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.2.3. Based on the description. Cisco IOS software and configuration register information using the show version command.3 Configuring WAN Connections Using SDM Express Determine when to use CLI or SDM.2.2.5 Media Activity Configuration Options ELO: 5. • Set up a new Cisco 1841 Integrated Services Router (ISR). 5.1.0.4 Cisco IOS Programs Cisco IOS not applicable 5.1.3 Bootup Process Power up an ISR and view the router system and configuration files using show commands.4.4 Configuring NAT Using Cisco SDM DsmbISP_v40_ActivityMap June 2007 page 21 of 56 .2 Using Cisco SDM Express and SDM ELO: 5.3 Configure an ISR using Cisco SDM Express Lab 5.2.2. 5.1. users.2.1 ISR ELO: 5. • Display router system. 3.3. • Explore command shortcuts.3.2 E-Lab Activity Interface Information Using the Cisco PT Activity: not applicable 5.4. TLO: 5.3.2 Lab 5.3.4 Configuring Configuring Hands-on Lab Dynamic NAT with Dynamic NAT with SDM SDM Configure Dynamic NAT using the Cisco SDM basic NAT wizard. • Configure Network Address Translation (NAT) using Port Address Translation (PAT) on a Cisco ISR router with the Cisco SDM Basic NAT Wizard.3.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives 5.2. Use the show run and show interface commands to answer questions about the router configuration.3 E-Lab Activity Modes ELO: 5. • Learn about error detection features.2.3 IOS Show Skills Practice Commands DsmbISP_v40_ActivityMap June 2007 page 22 of 56 . • Use command history.2.4 Media Activity IOS CLI PT Activity: Exploring the Skills Practice Cisco IOS CLI Using the Cisco CLI explore the various configuration modes.3 Using Show Commands Viewing the Router not applicable 5.2 Using the Cisco IOS CLI Using the Cisco not applicable 5. Drag the correct keystroke combination to the proper definition.1 Command Line Interface Modes Entering Command not applicable 5.3.3. 5. Use Cisco IOS show commands on a router located at the ISP.5 not applicable ELO: 5.3. Match the commands to their function.3 Configuring a Router Using IOS CLI ELO: 5.3.1. Explore the features of the Cisco IOS CLI.2. • Use the Cisco IOS CLI context-sensitive Help feature. 3. • Configure the customer Cisco 1841 ISR as a DHCP server. Lab 5.4.5.3.3.2 PT Activity: Configuring a Skills Practice Default Route not applicable Configure a default route on routers in a medium-sized business network topology.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives ELO: 5.7 Configuring DHCP Services Configuring a PT Activity: 5.3. and vty passwords.3. privileged EXEC mode. 5. • Configure banner messages. DsmbISP_v40_ActivityMap June 2007 page 23 of 56 .4 Configuring PT Activity: Ethernet and Serial not applicable Skills Practice Interfaces Configure the serial interfaces on two routers. 5. • Configure a LAN Ethernet interface.5 Configuring An Interface Configuring a Serial Interface on 5.6. including description.5.3.3. Configuring Basic Router Settings • Configure Ethernet and serial interfaces. • Configure the device host name for a router.3. • Configure passwords. • Verify the router configuration. • Configure a WAN serial interface.3. ELO: 5.5 Configuring Basic • Configure console. Configure the Ethernet and Serial interfaces of a router. with the Cisco IOS with the Cisco IOS • Configure the routers to not perform domain lookup of host names.7.4 Basic Configuration Performing an PT Activity: Initial Router Skills Practice Configuration Use Cisco IOS CLI to perform an initial router configuration. • Verify the interface configurations.3 E-Lab Activity not applicable Routers for Communication 5. • Verify connectivity between hosts and routers. CLI CLI • Configure synchronous console logging.3. ELO: 5.6 Configure a Default Route 5. • Configure the router host name.3.2 Cisco Router as a Skills Practice DHCP Server not applicable Configure a router as a DHCP server for attached clients.4 not applicable ELO: 5.5. Hands-on Lab Router Settings • Configure a message of the day (MOTD) banner.5 Configure basic settings on a router using the Cisco IOS CLI. DsmbISP_v40_ActivityMap June 2007 page 24 of 56 .Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives 5.3.4 Configuring PAT with SDM and Hands-on Lab Static NAT using Cisco IOS Commands Lab 5.3 NAT on a Cisco Skills Practice Router Configure static NAT on a router.9.3. ELO: 5. 5. • Configure the customer Cisco 1841 ISR to use NAT.3.3 Lab 5. • Configure and verify static NAT using Cisco IOS commands. • Verify the configuration.9 Backing Up a Cisco Router Configuration Backing Up a PT Activity: Cisco Router 5.3. • Verify DHCP functionality.8.3.3 not applicable Skills Practice Configuration to a TFTP Server Back up the running configuration to a TFTP server.3. • Configure a DHCP client.7 Configuring DHCP Configuring DHCP with SDM and the Hands-on Lab with SDM and the other Cisco IOS other Cisco IOS CLI CLI Use the Cisco SDM and IOS CLI to configure a router as a DHCP server.8 Configuring PAT with SDM and Static NAT using Cisco IOS Commands Configure PAT using Cisco SDM and static NAT using Cisco IOS CLI. • Verify NAT translations using Cisco IOS commands. • Configure a customer router for DHCP using SDM. • Configure a customer router for DHCP using the Cisco IOS CLI.8 Configuring Static NAT Using Cisco IOS CLI Configuring Static PT Activity: not applicable 5. • Configure basic router settings using the Cisco IOS CLI.3.7.3. • Configure NAT Port Address Translation (PAT) with the Cisco SDM Basic NAT wizard. • Save the current running configuration to the startup configuration. ELO: 5. • Back up the configuration to a TFTP server.8. and copy the new configuration from the TFTP server to the router. and use it to Lab 5. 5. • Edit the file using the Notepad text editor. • Verify network connectivity. • Establish a HyperTerminal session with a router. and use HyperTerminal to transfer HyperTerminal the file and configure a different router. Using HyperTerminal • Modify the file using Notepad.9b Managing Router Managing Router Hands-on Lab Configuration Files Configuration Files Using TFTP Using TFTP DsmbISP_v40_ActivityMap June 2007 page 25 of 56 .9.3. Configuration Files Hands-on Lab Configuration Files • Edit the file using the Notepad text editor. Use TFTP to save and load the running configuration.5 Lab 5.3.3.3.9.9a capture and save the running configuration as a text file for use as a Managing Router Managing Router backup. • Use TFTP to copy the router running configuration from a router to the TFTP server. and use HyperTerminal Using to restore the backup configuration to the router. • Download and install TFTP server software.4 Use HyperTerminal to save and load the running configuration.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives 5. 3.4.4 Connecting the CPE to the ISP ELO: 5. ELO: 5. • Configure PPP as the encapsulation type on a serial interface.3 Choosing a WAN Connection 5.4.3 Planning a WAN Hands-on Lab Upgrade Complete a WAN upgrade plan based on the business scenario Lab 5.4 Configuring WAN Connections Configuring a PPP Connection PT Activity: not applicable 5. Configure a serial WAN connection from a Cisco ISR to a CSU/DSU at an ISP.1 Installing the CPE ELO: 5.4.4.4.4.3 Planning presented.4.4.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives TLO: 5.2 Customer Connections over a WAN ELO: 5.2 Between a Skills Practice Customer and an ISP DsmbISP_v40_ActivityMap June 2007 page 26 of 56 . • Verify the PPP configuration. • Create a business proposal based on a scenario of an organization a WAN Upgrade that requires a WAN upgrade. 5. • Set up a new Cisco LAN switch.6.3. • Configure initial switch global settings.5.1 Standalone Switches ELO: 5. • Verify the configuration on the switch. • Configure basic port security. Performing an PT Activity: not applicable Initial Switch Skills Practice Configuration ELO: 5. Up a Switch • Configure HyperTerminal so that the computer can communicate with the router. • Configure port duplex and speed settings.4. Cisco 2960 Switch Cisco 2960 Switch • Verify network connectivity.5. Lab 5.3 Initial Switch Configuration 5.1 Quiz DsmbISP_v40_ActivityMap June 2007 page 27 of 56 .2.5.4 Configuring the • Configure a router and attach it to the switch.5. TLO: 5.4 5.5.5.5.2 Power Up the Cisco 2960 Switch Powering Up a Switch Power up a Cisco 2960 switch. Lab 5. 5.2 Network Discovery not applicable Skills Practice • Examine CDP show commands.7.5.6 Chapter Summary ELO: 5. • Configure host PCs and attach them to the switch.5. Tool • Examine CDP configuration commands.3 E-Lab Activity Configuring a not applicable Cisco 2960 Switch Configure the basic settings on a Cisco Catalyst switch.2 Hands-on Lab ELO: 5.5.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives TLO: 5. • Connect a switch to the network. 5.5 Initial Cisco 2960 Switch Configuration ELO: 5. ELO: 5.4.1 Summary TLO: 5.4 PT Activity: Connecting a Skills Practice Switch not applicable Configure and connect the Cisco 2960 switch.5 Cisco Discovery Protocol Use the CDP show commands to discover information about devices Using CDP as a PT Activity: in the network.5 Hands-on Lab Configuring the • Configure a switch management VLAN IP address. • Perform an initial configuration of a Cisco Catalyst 2960 switch. 5.5.3. Perform a basic switch configuration. Configure and connect the switch to the LAN using a configuration checklist.4 Connecting the LAN Switch to the Router 5.2 Powering • Connect a computer to the router console interface.5.5.7 Chapter Quiz ELO: 5. 5 or higher and SUN Java Runtime Environment (JRE) version 1.2_05 or later (or Java Virtual Machine (JVM) 5.3810).0.4 installed • Cisco 1841 ISR router configured with factory default settings and with a serial port add-in module • (Optional) Other Cisco router model with SDM installed • Windows XP computer with Internet Explorer 5. DsmbISP_v40_ActivityMap June 2007 page 28 of 56 .4.0.Equipment Needed Supported by NETLAB • Cisco 1841 ISR or other comparable router • Power cable • Windows PC with terminal emulation program • RJ45-to-DB9 connector console cable Lab not supported • Cisco 1841 ISR router with SDM version 2. • Straight-through or crossover category 5 Ethernet cable • Access to PC network TCP/IP configuration CRP or BRPv2 pod SDM is needed. Equipment Needed Supported by NETLAB • Cisco 1841 ISR router with SDM version 2.2_05 or later (or Java Virtual SDM is needed.0.4 or later installed and with basic configuration completed • (Optional) Other Cisco router model with SDM installed • Windows XP computer with Internet Explorer 5.5 or later and Sun Java CRP or BRPv2 pod Runtime Environment (JRE) version 1.4. Machine (JVM) 5.0.3810) • Straight-through or crossover Category 5 Ethernet cable • Access to PC network TCP/IP configuration DsmbISP_v40_ActivityMap June 2007 page 29 of 56 . • Two Windows XP computers with HyperTerminal installed • Two straight-through Category 5 Ethernet cables (H1 to S1 and S1 to R2) • Crossover Category 5 Ethernet cable (H2 to R2) • Null serial cable (R1 to R2) • Console cables (H1 ro R1 and H2 to R2) • Access to the host H1 and H2 command prompt • Access to the host H1 and H2 network TCP/IP configuration CRP or BRPv2 pod DsmbISP_v40_ActivityMap June 2007 page 30 of 56 . These should be non-SDM routers.Equipment Needed Supported by NETLAB • Two routers. because the required SDM startup configuration is deleted when the startup-config is erased. each with an Ethernet and serial interface. if possible. 4.0.3810) • Windows XP computer (host H2) • Straight-through Category 5 Ethernet cables • Null serial cable (R1 to R2) • Console cables (H1 to R1 and H2 to R2) • Access to the host H1 and H2 command prompt • Access to the host H1 and H2 network TCP/IP configuration CRP or BRPv2 pod DsmbISP_v40_ActivityMap June 2007 page 31 of 56 .3810) • Windows XP computer (host H2) • Straight-through Category 5 Ethernet cables • Null serial cable (R1 to R2) • Console cables (H1 to R1 and H2 to R2) • Access to the host H1 and H2 command prompt • Access to the host H1 and H2 network TCP/IP configuration • Cisco 1841 ISR router (or comparable) with SDM version 2.2_05 or later (or Java Virtual Machine (JVM) 5.4 or later installed to act as the customer router • Cisco 1841 router (or other router) to act as the ISP router • Cisco 2960 switch (or other switch/hub) to connect hosts H1.5 or later and Sun Java Runtime Environment (JRE) version 1. and the customer router • Windows XP computer (host H1) with Internet Explorer 5.4 or above installed to act as the customer router • Cisco 1841 router (or other router) to act as the ISP router • Cisco 2960 switch (or other switch/hub) to connect hosts H1. H2. H2.4.0.0.2_05 or later (or Java CRP or BRPv2 pod Virtual Machine (JVM) 5. and the customer router • Windows XP computer (host H1) with Internet Explorer 5.0.5 or higher and Sun Java Runtime Environment (JRE) version 1.Equipment Needed Supported by NETLAB • Cisco 1841 ISR router (or comparable) with SDM version 2. DsmbISP_v40_ActivityMap June 2007 page 32 of 56 .Equipment Needed Supported by NETLAB • Two routers. each with an Ethernet and serial interface • Two Windows XP computers • Straight-through Category 5 Ethernet cable (H1 to switch) • Crossover Category 5 Ethernet cable (H2 to router R2) • Null serial cable • Console cables (from H1 and H2 to routers R1 and R2) • Access to the computer host command prompt • Access to the computer host network TCP/IP configuration • One router with an Ethernet interface • One Windows XP computer (or optional Discovery Server) • Crossover Category 5 Ethernet cable (H1 to router R1) • Console cable (from H1 to R1) • Access to the computer host command prompt • Access to the computer host network TCP/IP configuration Lab not supported CRP or BRPv2 pod TFTP Server is needed. Equipment Needed Supported by NETLAB Pencil and paper No equipment is needed DsmbISP_v40_ActivityMap June 2007 page 33 of 56 . Equipment Needed Supported by NETLAB • Cisco 2960 or other comparable switch • Power cable • Windows PC with terminal emulation program • Console cable Lab not supported • Cisco 2960 switch or other comparable switch • Router with Ethernet interface to connect to switch • Three Windows-based PCs. one with a terminal emulation program • RJ-45-to-DB-9 connector console cable • Three straight-through Ethernet cables • Access to the PC command prompt • Access to a PC network TCP/IP configuration LSP or BSP pod DsmbISP_v40_ActivityMap June 2007 page 34 of 56 . 1(3) Chapter 6: Routing TLO: 6. to the destination Ethernet networks.1 Enabling Routing Protocols ELO: 6.5.3 not applicable DsmbISP_v40_ActivityMap June 2007 page 35 of 56 .1.0 Chapter Introduction ELO: 6.2 Creating Creating a Network a Network Diagram Hands-on Lab Diagram from from Routing Routing Tables Tables ELO: 6.1.5 not applicable communication between all clients.1. then click the new router.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4. To indicate a directly connected network. Create a network topology diagram based on the output of the show ip route command. specify the exit interface.1 Routing Basics Manually configure and reconfigure static routes.3 Common Interior Routing Protocols ELO: 6.5 Configuring and Verifying RIP PT Activity: Companion to Configuring RIP Hands-on Lab Configure and verify RIP. ELO: 6.1. • Configure routers using basic interface configuration commands. Click each router to complete the routing table entries. specify the Next Hop Router. select the shortest path.1. • Interpret router outputs. • Draw a diagram of the network topology.2 Routing Protocols For each router.1.5 Lab 6. based on the number of hops.1.1. first click Check.0. • Identify networks and IP addresses for each router. Skills Practice and Default Routes • Test connectivity to ensure that each device can fully communicate with all other devices. • Verify the RIP configuration. • Enable RIP.2.1. 6.1.4 Routing Within An Organization ELO: 6. • Configure static routes on each of the routers to allow all PT Activity: Configuring Static 6.1. 6. To indicate non-directly connected networks.4 Media Activity Routing Protocols not applicable 6.1 Introduction TLO: 6. • Reflect upon and document the network implementation.2. To proceed to another router. 1.5.4 Hands-on Lab Configuring and Verifying RIP Lab 6.1. • Implement RIP routing and verify that network routes are being exchanged dynamically.5 Configure and Verify RIP Configure and verify RIP.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives 6. DsmbISP_v40_ActivityMap June 2007 page 36 of 56 . 2.2.3 Exterior Routing Protocols and the ISP ELO: 6.2.3.2 Routing Across the Internet ELO: 6.3 Chapter Summary ELO: 6.1.2 Exterior Routing Protocols ELO: 6.2. select either shared or private.2.5 Configuring BGP with Default Routing Configure BGP on the external gateway router. TLO: 6.1 Summary TLO: 6.4 Chapter Quiz ELO: 6.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives TLO: 6.1 Quiz DsmbISP_v40_ActivityMap June 2007 page 37 of 56 .4.4 Configuring and Verifying BGP Identify which networks require shared or private AS numbers.1 Autonomous Systems Autonomous not applicable 6.4.2 Configuring BGP Hands-on Lab with Default Routing Lab 6.2. For each scenario. 6.2. • Configure the customer router with an internal network that will be advertised by ISP1 via Border Gateway Protocol (BGP).3 Media Activity Systems ELO: 6. • Configure BGP to exchange routing information between ISP1 in AS 100 and ISP2 and AS 200. Equipment Needed paper and pencil DsmbISP_v40_ActivityMap June 2007 page 38 of 56 . • Two Windows XP computers • Two straight-through Category 5 Ethernet cables (H1 to switch and switch to R1) • Crossover Category 5 Ethernet cable (H2 to router R2) • Null serial cable • Console cables (from H1 and H2 to routers R1 and R2) • Access to the H1 and H2 command prompt • Access to the H1 and H2 network TCP/IP configuration DsmbISP_v40_ActivityMap June 2007 page 39 of 56 . each with an Ethernet and serial interface. if possible. These should be non-SDM routers.Equipment Needed • Two routers. because the required SDM startup configuration is deleted when the startup-config is erased. Equipment Needed • Customer router (1841 or other) • Switch (optional if crossover cable is used between PC and customer router) • 2 ISP routers (1841 or other routers that support BGP) • Windows XP computer with terminal emulation program installed • Two straight-through Category 5 Ethernet cables (H1 to switch and switch to R1) • Two null serial cables • Console cable to configure routers • Access to host H1 command prompt • Access to host H1 network TCP/IP configuration DsmbISP_v40_ActivityMap June 2007 page 40 of 56 . 2.4.a Examine the interface of a Windows DNS server to view the cached Examining Cached Examining Cached DNS information from a DNS lookup.3 FTP ELO: 7. create primary and secondary DNS zones.5 ELO: 7.3.3.4.2.3.3.1 Customer Requirements ELO: 7.3.4 SMTP.2 Reliability and Availability TLO: 7. 7. Drag the 7.2 Hands-on Lab DNS Information DNS Information • View the cached DNS information on a Windows DNS server after on a DNS Server on a Windows DNS making a DNS request that is looked up.4.b Creating Primary and Secondary Forward Lookup Zones Using a Windows server. Identify the characteristics of HTTP and HTTPS.1 TCP/IP Host Name Lab 7.1.2 HTTP and HTTPS 7. Server Creating Primary and Secondary Hands-on Lab Forward Lookup Zones Lab 7.2. 7.3.2 Media Activity Services not applicable Identify protocols that are required for each server type.3 Hands-on Lab the HOSTS File in • Edit the local HOSTS file on a Windows PC to map a name to an IP File in Windows address for easier identification.3.3 Differences Between TCP and UDP Differences Identify the characteristics and protocols of TCP and UDP.3.3 DNS Name Resolution Lab 7.2 Protocols That Support ISP Services ELO: 7.0 Chapter Introduction ELO: 7.3.4 Implementing DNS Solutions TLO: 7.1 Review of TCP/IP Protocols ELO: 7.3 Media Activity Between TCP and not applicable option to either TCP or UDP.2.3. POP3.4 Supporting Multiple Services TLO: 7.1.3.1 Introducing ISP Services ELO: 7. ELO: 7.3.4.3 Domain Name System ELO: 7. Editing the HOSTS 7.5 Media Activity HTTP and HTTPS not applicable ELO: 7.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.2 Transport Layer Protocols ELO: 7. Drag the characteristics to the correct protocol.1.4 Services and Protocols ELO: 7.1.3.4.1 Introduction TLO: 7.2 DNS Hierarchy ELO: 7.3.1 Editing Set up name resolution using the HOSTS file.1 Services 7.4.0. Windows ELO: 7. Drag protocol to the correct server type. • Create primary and secondary forward lookup zones on Windows DNS servers.2.3. UDP ELO: 7.1(3) Chapter 7: ISP Services TLO: 7. and IMAP4 DsmbISP_v40_ActivityMap June 2007 page 41 of 56 .2. 5.5 Chapter Summary ELO: 7.1 Summary TLO: 7.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives TLO: 7.1 Quiz DsmbISP_v40_ActivityMap June 2007 page 42 of 56 .6 Chapter Quiz ELO: 7.6. Equipment Needed • PC running Windows XP • Administrator privileges on the PC •Windows 2003 Server with DNS running • Administrative access to server • Internet connectivity • Two Windows 2003 Servers with DNS running • Administrative access to servers • Internet connectivity DsmbISP_v40_ActivityMap June 2007 page 43 of 56 . Equipment Needed DsmbISP_v40_ActivityMap June 2007 page 44 of 56 . 2.2 Firewalls 8.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.4 Wireless Security Configuring WEP PT Activity: on a Wireless Skills Practice Router ELO: 8.3 Securing Local Hands-on Lab Data and Transmitted Data TLO: 8.2.1 ISP Security Considerations ELO: 8.1. Identify characteristics and features of IPS and IDS. DsmbISP_v40_ActivityMap June 2007 page 45 of 56 .0 Chapter Introduction ELO: 8.1 Introduction TLO: 8.2.3 IDS and IPS 8. for Access Lists • Based on the predefined network diagram. • Configure WEP security between a workstation and a Linksys wireless router.2.5 Host Security 8.3.3.1.2.2 Security Tools ELO: 8.3 Data Encryption Perform the data security tasks need to analyze and secure local data and transmitted data.1. 8.3 Securing • Use Windows New Technology Files System (NTFS) permissions Local Data and to secure local data on a Windows XP Professional edition Transmitted Data computer.2.1.2.1 Planning the network.1.0. 8.2. ELO: 8.2. Lab 8. • Research an Anti-X software package that meets the requirements for a small business.1 ISP Security Services ELO: 8. determine where to and Port Filters implement access lists and port filters to help protect the network.1.1(3) Chapter 8: ISP Responsibility TLO: 8.4.3 PT Activity: Planning Networknot applicable Skills Practice based Firewalls • Place firewalls in appropriate locations to satisfy security requirements.2.2. • Use Internet Explorer 7 to access secure web sites.4 Researching an Hands-on Lab Anti-X Software Product not applicable Lab 8.4 Media Activity IDS and IPS not applicable ELO: 8. Click each statement(s) that applies.5.1 Access Control Lists and Port Filtering Planning for Hands-on Lab Access Lists and Port Filters Determine where to implement ACLs and port filters to help protect Lab 8.2 Security Practices ELO: 8.5 Researching an Anti-X Software Product Recommend an anti-X software package for a small business.3 ELO: 8.2.2.3 8. 2 Managing Remote Hands-on Lab Network Devices with Telnet Lab 8.3. and then conduct a network capture with Wireshark.3a Managing Remote Network Devices with Telnet DsmbISP_v40_ActivityMap June 2007 page 46 of 56 .3 Monitoring and Managing the ISP ELO: 8.2 ELO: 8.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives TLO: 8. • Disconnect from a Telnet session. 8.3 Device Management Using In-band Tools Use Telnet to manage remote network devices.1. • Create a filter to limit the network capture to ICMP packets. • Suspend and reestablish a Telnet session. • Retrieve information about remote routers using show commands.3. • Establish a Telnet connection to a remote router. • Engage in multiple Telnet sessions.2 Conducting a Hands-on Lab Network Capture with Wireshark Lab 8. • Verify that the Application Layer between the source and destination is working properly. 8.3.2 Monitoring Network Link Performance Download. • Display active Telnet sessions.3. • Analyze a sample SLA and answer questions regarding content and suitability based on customer needs. • Perform a network traffic capture with Wireshark to become familiar with the Wireshark interface and environment.3.1 Interpreting a Service Level Agreement Examine an SLA and practice interpreting the sections of the SLA.3.3. • Retrieve CDP information from routers not directly connected. • Analyze traffic to a web server. • Ping a remote host to observe how the ICMP packet filter operates during the network capture.2 Conducting a Network Capture with Wireshark ELO: 8. 8.3. install.1 Service Level Agreements Interpreting a Hands-on Lab Service Level Agreement Lab 8.3. • Describe the purpose of a Service Level Agreement (SLA).3. • Review general customer SLA requirements.2. 4 Disaster Recovery Plan 8.2.4 Configuring a Hands-on Lab Remote Router Using SSH Lab 8.4. • Establish a connection to a Cisco ISR using SSH version 2. plan an appropriate backup Solution a Backup Solution solution.4 ELO: 8. Managing Cisco Managing Cisco • Use TFTP to copy the software image from a router to a TFTP 8.1 Backup Media ELO: 8.5 Chapter Summary ELO: 8.4.4 Using SNMP and Syslog TLO: 8.4.3 Hands-on Lab Managing Cisco IOS Images with Hands-on Lab ROMMON and TFTP Lab 8.3. • Use ROM monitor (ROMmon) and the tftpdnld command to restore an image from a TFTP server.5.1 Quiz June 2007 page 47 of 56 .1 Summary TLO: 8.4. • Back up a Cisco IOS software image to a TFTP server. Lab 8. • Check the existing running configuration.3a • Analyze the Cisco IOS image and router flash memory.4.2 Hands-on Lab IOS Images with server.2 Methods of File Backup Plan a backup solution for a small business.4.4. ELO: 8.4.4.6 Chapter Quiz ELO: 8.4.3.3b Managing Cisco IOS Images with ROMMON and TFTP Use ROMmon and tftpdnld to manage an IOS image. Identify the actions that are associated with each phase of creating a disaster recovery plan.3b Configuring a Remote Router Using SSH Configure a remote router using SSH.3. IOS Images with TFTP • Reload the backup software image from a TFTP server into flash TFTP on a router.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives 8.3. • Use SDM to configure a router to accept SSH connections.3. 8. • Configure a non-SDM router for SSH using the Cisco IOS CLI.6. Planning a Backup Lab 8.3. • Configure SSH client software on a PC.2 Planning • Based on the business scenario.4. • Analyze the Cisco IOS image and router flash memory.3 Cisco IOS Software Backup and Recovery Use a TFTP to backup and restore a Cisco IOS image.4 Media Activity Disaster Recovery not applicable Plan DsmbISP_v40_ActivityMap TLO: 8. Drag each disaster recovery plan phase to the corresponding action. ELO: 8. 8.4.4 Backups and Disaster Recovery ELO: 8. WEP and WPA are enabled by a similar process.Equipment Needed • Windows XP Professional computer with administrative access • NTFS File System on the computer and Simple File Sharing turned off (under the Folder Options of Windows Explorer.) • User accounts preconfigured for users Bob and Joe • Internet connectivity Pencil and paper *Note: WPA is not supported by Packet Tracer at this time. Computer with Internet access to conduct research DsmbISP_v40_ActivityMap June 2007 page 48 of 56 . However. 5 software (or most current version) • Internet connectivity (optional but desirable) • Access to the PC command prompt • Access to PC network TCP/IP configuration • One router with two serial interfaces and one Fast Ethernet (1841 or other) • Two routers with one serial interface and one Fast Ethernet (1841 or other) • One 2960 switch (or comparable) for the R2 LAN • Three windows XP computers (hosts H2 and H3 are mainly for configuring routers R2 and R3) • Straight-through and crossover Category 5 Ethernet cables as required • Two null serial cables • Console cable to configure routers • Access to host H1 command prompt • Access to host H1 network TCP/IP configuration DsmbISP_v40_ActivityMap June 2007 page 49 of 56 .Equipment Needed Sample SLA (included in lab) • A Windows XP-based PC with an Ethernet network and at least two hosts • Wireshark Version 0.99. 5 or later and Sun Java Runtime Environment (JRE) version 1. if router is to be configured using the CLI • Access to the PC command prompt • Access to PC network TCP/IP configuration Pencil and paper • One router with an Ethernet interface • One Windows XP computer (or Discovery Server) • Crossover Category 5 Ethernet cable (H1 to router R1) • Console cable (from H1 to R1) • Access to the computer host command prompt • Access to the computer host network TCP/IP configuration • One router with an Ethernet interface • One Windows XP computer (or Discovery Server) • Crossover Category 5 Ethernet cable (H1 to router R1) • Console cable (from H1 to R1) • Access to the computer host command prompt • Access to the computer host network TCP/IP configuration DsmbISP_v40_ActivityMap June 2007 page 50 of 56 .Equipment Needed • Cisco 1841 ISR router with SDM version 2.3810) • Latest release of putty.0.2_05 or later (or Java Virtual Machine (JVM) 5.2 or later.0.4 installed and with basic configuration completed • (Optional) Other Cisco router model with SDM installed • (Optional) Other Cisco router model without SDM installed (Cisco IOS software version 12.exe client installed on the PC and accessible on the desktop • Straight-through or crossover Category 5 Ethernet cable (for SDM and SSH) • (Optional) Console cable. must support SSH) • Windows XP computer with Internet Explorer 5.4. 1(3) Chapter 9: Troubleshooting TLO: 9.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1 Introduction DsmbISP_v40_ActivityMap June 2007 page 51 of 56 .0 Introduction ELO: 9.0. Equipment Needed DsmbISP_v40_ActivityMap June 2007 page 52 of 56 . 2 PT Activity: Putting It All Skills Practice Together Hands-on 10. implement a network upgrade .0.0.1(3) Chapter 10: Course Summary TLO: 10.1. • Use an installation checklist and connect the networking devices. • Create an IP addressing scheme for the upgraded Summary Lab network. DsmbISP_v40_ActivityMap June 2007 page 53 of 56 .1 Summary Use the knowledge and skills presented in this course to perform a simulated network upgrade. D2_PTAct_10_0_1_ • Create an IP addressing plan for a small network 2. • Review an existing customer network. • Given a customer work order.pdf • Implement a network equipment upgrade • Verify device configurations and network connectivity 10.1 Putting It All • Create a physical diagram of the new network.0. • Use a verification checklist and verify connectivity and routing table updates. Together • Use a configuration checklist and configure networking devices.0.0 Putting It All Together ELO: 10.1.Chapter Course Page ELO TLO Activity/Lab Title Handout Learning Objectives CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4. 10.3 Lab: Summary Putting It All Together Use the knowledge and skills presented in this course to perform this lab activity. Equipment Needed • ISP router with two serial interfaces and one Fast Ethernet interface (preconfigured by instructor) • Ethernet 2960 switch to connect to the ISP router (preconfigured by instructor) • Customer 1841 router (or other router with two Fast Ethernet interfaces and at least one serial interface to connect to the ISP) • Linksys WRT300N (or other Linksys that supports wireless) • Ethernet 2960 switch to connect wired hosts • Windows XP-based host to act as a wireless client (wireless NIC) • Windows XP-based host to act as a wired client (Ethernet NIC) • Category 5 cabling as necessary • Serial cabling as necessary • ISP work order (in this lab) • Device Configuration Checklist (in this lab) • Network Equipment Installation Checklist (in this lab) • Configuration Verification and Connectivity Checklist (in this lab) DsmbISP_v40_ActivityMap June 2007 page 54 of 56 . PT Activities.Ch 1 Equipment-based Labs Paper-based Labs PT Activities Media Activities Simulations Games Critical Thinking 0 1 2 2 0 0 0 Ch 2 0 0 1 4 0 0 0 Ch 3 0 1 3 1 0 0 0 Ch 4 1 1 3 2 0 0 0 113 Total (Labs. Media Activities. E-Lab Activities. and Simulations) . and Simulations) .Ch 5 10 1 12 3 4 0 0 Ch 6 3 0 2 2 0 0 0 Ch 7 2 1 0 3 0 0 0 Ch 8 6 4 2 2 0 0 0 Ch 9 11 6 7 7 1 0 0 Ch 10 1 0 1 0 0 0 0 34 15 33 26 5 0 0 113 tivities.
Report "Crosswalk for CCNA 2 Labs and Activities.xls"