copper_nickel.pdf

Copper-Nickel ProductsCopper-Nickel Tubing Fittings, Flanges, Sheet, Plate and Rod ALASKAN COPPER WORKS ALASKAN COPPER & BRASS COMPANY www.alaskancopper.com C opper-nickel alloys are used in ship board and offshore drilling piping systems, industrial condensers, heat exchangers, evaporating equipment, and power installations. Their anti-fouling properties and resistance to pitting and general corrosion has led to increased use of these alloys for piping, fittings and fabrication. 70-30 copper-nickel is commonly used for applications where severe temperature and velocities require high reliability and dependability. Both military and commercial vessels utilizing copper-nickel components have operated for periods of up to thirty years with minimal maintenance. Automatic straight-seam welding using double-head, gas tungsten-arc produces pipe and tubing in sizes up to 24 inches and in continuous lengths up to 20 feet. Sizes up to 54 inches are also available, using other welding techniques. This catalog covers sizes, weights, specifications and dimensional requirements for the military, marine, waste-water and power industries. Buttwelding and belled end fittings per NAVSEA and MSS Drawings and Specifications are available. Contact one of our informed sales representatives for assistance with your inquiries for price and availability or the placement of your next order. NAVSEA Outlets are available for prompt delivery. Boss outlets can be supplied with threaded, socket weld or buttwelding ends. See page 44. Flanges are offered in a wide variety of alloys and configurations. See page 45. Pipe is formed and welded from ASTM B 171 or MIL-C-15726 plate. Threaded and socket weld fittings are stocked in most common sizes, alloys and pressure ratings. See page 49. www.alaskancopper.com History W hen Alaskan Copper Works was founded as a marine coppersmithing company in 1913, one of its major activities was forming and brazing pipe and pipe fittings made from copper, brass and bronze, primarily for use in the Pacific Northwest shipbuilding industry. Beginning in the 1920’s, many of the area’s growing process industries, such as pulp and paper, which had relied on wood stave and cast iron as corrosion resistant materials for their tanks and piping, welcomed the development of a new weldable alloy, silicon bronze. This alloy had special advantages in weight, cost and corrosion resistance. Alaskan Copper Works participated in the transition to this innovative metal and in the development of the welding techniques necessary for its proper fabrication. In the 1930’s, alloys with even better corrosion resistance, such as the austenitic stainless steels, became available and quickly came into general use not only in the pulp and paper industry but also in the other process industries then beginning to develop, such as Alaskan Copper Works yesterday petrochemical and food processing. Again, Alaskan Copper Works participated in the application of these new, advantageous materials and in the development of the welding and fabricating procedures required to maximize their usefulness. Over the intervening years, improvements in our manufacturing capacities have seen the standard lengths of most pipe sizes increase from 4 feet to 10 feet and then to 20 feet. Dieformed smooth-flow elbows began to be made in small sizes and gradually advanced to include larger sizes and many radii and wall thicknesses. Other advances over the years have led to tees being made with smooth-drawn outlets, the development of many available choices in the types of stub ends for different services and our manufacturing of pipe and fittings to advanced specifications and in “exotic” alloys, including our qualification to produce fittings for the nuclear power industry. As a result, today’s customers of the Stainless Products Division of Alaskan Copper Works benefit from the accumulated experience of one of the nation’s largest organizations devoted exclusively to the manufacturing of pipe and pipe fittings in stainless steels, high-nickel alloys, duplex stainless alloys, copper-nickel alloys, aluminum, titanium, zirconium, copper and other weldable corrosion resistant alloys. Alasan Copper Works today. 1 www.alaskancopper.com NAVSEA 810-1385880 Rev D Concentric 19. 18 Threaded 52 Long Turn. 55 Welded Fittings. Class 200 and 50 24 Threaded. Slip-On. Single Sweep 23 Nipples 52 Long Turn. Class 400 50 Copper-Nickel Sheet & Plate Technical Information Fitting Tolerances NAVSEA 810-1385880 Rev D 58 Commercial Grade 58 Comparison of Wall Thicknesses ANSI. Plate. Class 3000 51 Caps. NAVSEA 810-1385880 Rev D Machined Fittings 40. Belled Ends 42 Long Radius Reducing 90° 14 Couplings 43 Elbows. 70-30 8 Seamless Copper Tubing Navy Specification MIL-T-24107 9. NAVSEA 810-1385880 Rev D 15 Tees. NAVSEA 810-1385880 Rev D 25 ASME Flanged and Dished Heads 26 Lap-Joint Stub Ends 44 Threaded & Socket Weld Fittings Threaded Fittings. Spectacle Blind 48 Dimensional Summary 64 Warranty 63 Weld Neck. 3000 and 6000 49 Socket Weld. Rod and Bar 62 ANSI. MSS Standard Practices 62 Military 63 Copper-Nickel Rod 90-10 and 70-30 57 Flanges Commercial 150 PSI. NAVSEA 810-1385880 Rev D 24 Socket Weld. Class 3000 51 45° Laterals. Special Flanges. Blind.alaskancopper. Composite. 37 Long Radius 90° 11 Concentric Street 38. 20 Pilot and Non-Pilot Bosses Eccentric 21. ASTM & MIL-T-16420K 59 Specifications Pipe & Tubing 60 Welded Fittings. Double Sweep 23 Outlets. 41 Bosses 44 Straight 16 Socket Weld 52 Reducing 17. Class 150. Class 400 and 3000 53 Miscellaneous Outlets 53 53 Reducers.com . 39 Long Radius 45° 12 Eccentric Short Radius 90° 13 Caps. Clad 2 45 www. 300 PSI 46 Navy 150 PSI. Socket Weld. Buttwelding 60 90-10 54. 22 Forged Fittings Sleeves. NAVSEA 810-1385880 Rev D 180° Long Radius Return Bends.Contents Seamless & Welded Tubing Belled End Fittings Seamless Tubing Elbows 90-10 3 Long Radius 90° 27 70-30 6. Class 3000 and 6000 49 Socket Weld. 250 PSI 47 Special Order. Overlay. 7 Long Radius 90° Street 28 Long Radius 45° 29 Welded Tubing 90-10 4 Long Radius 45° Street 30 70-30 5 Short Radius 90° 31 Short Radius 90° Street 32 Condenser Tubing Admiralty Brass 8 90-10. 10 Buttwelding Fittings Tees Straight 33 Reducing 34 Straight Thermowell 35 Angle Thermowell 35 Reducers Concentric 36. Belled End 61 70-30 56 Flanges and Bosses 61 Sheet. 2 .6 3 4 5 6.000 4.035 .315 1.156 . ASTM B 466.17 .6%.0%.146 .250 .625 7.091 .6 8.083 .065 .563 6.3 1.187 .065 .035 .049 .095 . 3 www.10 and Sch 40s in ANSI B36.19.250 12.114 .107 .alaskancopper.75 .126 .065 .8 21.1 .9 140397 .375 .7 .148-.250 .120 .9 1 1. 65 .000 5. 63 .97 1. Iron 1.083 . Sizes not shown may be available upon request.050 1.com .375 2. Yield 18.000 psi.900 2.140 .065 . Nominal Chemicals: Copper 88.250 16. Dimensions are in inches.065 .2 6.6 140177 140193 140185 140216 140208 140224 140232 140240 140258 140389 .675 .75 12.312 31 152629 Regular wall per ASTM B 466 is similar to Sch 40 in ANSI B 36.500 .4%.109 .660 1. ■ Specifications: MIL-T-16420K. All weights are approximate.4 8 9 12 13 17 26.875 3.5 42 134192 152483 152506 152548 139998 140004 140012 140020 140038 140046 140054 140062 140070 140088 140096 140101 140119 140127 513142 152564 140143 140151 140169 .Copper-Nickel Tubing 90-10 Seamless Tubing.151 . Elongation 35%. Grade 1.150 .375 .5 .8 2.125 .625 10.500 5. ■ Widely used in marine applications where resistance to both corrosion and biofouling is important.2 .095 .134 .500 4. 60. 55 . Type I.540 .4 .187 .625 8.840 1.000 psi. Nickel 10.250 .035 .7 152580 152603 . Annealed Temper UNS Designation Number: 90-10 (UNS C70600).9 3. Specifications: pg.072 . ■ Stocked in 20 foot standard lengths.5 1.072 . ■ Average Mechanical Properties: Tensile 45.1 4.082 . ■ ■ Nominal Pipe Size 1 /4 /8 1 /2 3 /4 1 11/4 11/2 2 21/2 3 31/2 4 41/2 5 6 7 8 10 12 3 Class 200 MIL-T-16420 ASTM B 466 Regular Wall OD Minimum Wall Lbs/Ft Part Number Nominal Wall Lbs/Ft Part Number .219 . alaskancopper. Specifications: pg.625 8.187 .125 . Wall thicknesses for Class 200 sizes 14”-24” are per Alaskan standard. Annealed Temper ■ ■ ■ ■ ■ ■ Nominal Pipe Size OD Class M inim200 um MIL-T-16420K Wal l Lbs/Ft Part Number Minimum Class 50 MIL-T-16420K Part Lbs/Ft Number Wall 5 6 8 9 10 12 14 16 18 20 24 5.165 .563 6. Dimensions are in inches.250 . All weights are approximate.250 140266 140274 433910 235508 299421 140305 436015 152700 439047 281151 434217 .156 .625 9.134 .180 . 4 www.250 .250 .75 14 16 18 20 24 . 45 51 58 68 80 19 26 30 35 42 47.250 .134 .5 57.165 .5 16 23 25 40.180 9 11.151 .625 10.com .4 235493 235485 235477 152687 235469 434241 438588 Note: 90-10 welded tubing is manufactured from raw material inventory on hand and is available thru 54” OD.75 12.187 .Copper-Nickel Tubing 90-10 Welded Tubing. Sizes not shown may be available upon request.250 . 60.180 . 563 6. 60.625 8. Yield 20. Wall thickness for Class 200 sizes 14”-24” are per Alaskan standard.125 .625 10.000 psi. These tubes maintain their strength at elevated temperatures better than the brasses or copper. ■ ■ Class 200 MIL-T-16420K Nominal Minimum Pipe Size OD Wall Lbs/Ft Part Number 5 6 8 10 12 14 16 20 24 140347 140339 140355 140363 140371 226876 277631 467723 467749 5.5 16 25 40 45 51 68 80 Note: 70-30 welded tubing is manufactured from raw material inventory on hand and is available thru 54” OD. feed water heaters. Type II. Specifications: pg. Annealed Temper UNS Designation Number: 70-30 (UNS C71500). ■ Specifications: MIL-T-16420K.250 .250 . Nickel 30. Grade 1 or Grade 2.148 .250 9 11.0%. 5 www. They are widely used in evaporators. Nominal Chemicals: Copper 69. Iron 0.75 12.134 .alaskancopper. ASTM B 608.000 psi. ■ 70-30 Copper-Nickel tubing has excellent resistance to impingement attack and other forms of corrosion in sea water.5%. refinery and chemical equipment.187 .com .250 .250 .75 14 16 20 24 . ■ Average Mechanical Properties: Tensile 55. Dimensions are in inches.Copper-Nickel Tubing 70-30 Welded Tubing. ASTM B 467. ■ Normally supplied in 15 foot lengths . Sizes not shown may be available upon request. All weights are approximate.5%. Elongation 30%. Iron 0.083 1 140591 3 /4 1.540 3300 .500 3300 .049 .74 140583 1 /2 .9 140884 1 /2 . ■ ■ Nominal Pipe Size OD Class Minumum Wall Lbs/Ft 70-30 Part Number .065 . Annealed. Annealed Temper UNS Designation Number: 70-30 (UNS C71500).065 .405 6000 .315 3300 .035 .840 700 .675 700 .540 200 . ■ Stocked in 20 foot standard lengths.7 140876 3 /8 .072 .000 psi.4 663604 .840 3300 .315 700 .120 .1 152302 .058 .6 141068 1 1.4 152132 1 /4 .250 200 . ■ Specifications: MIL-T-16420K.109 .675 6000 .120 1 140892 1 /2 . Elongation 35%.035 .072 .675 200 .15 140999 .058 .065 .120 .alaskancopper.095 .85 140436 3 /4 1.840 200 .840 6000 .238 2.675 3300 . ■ They are widely used in evaporators.500 700 .0%.27 140842 1 /8 .058 .5 235003 . Nickel 30.050 6000 .540 700 .4 140567 1 /4 . Nominal Chemicals: Copper 69. These tubes maintain their strength at elevated temperatures better than the brasses or copper.095 1.065 .072 .134 1.083 .2 140703 .375 6000 . Yield 20.67 140428 1 /2 .065 .6 140907 3 /4 1.095 .050 3300 .035 .750 1650 .1 140818 .6 140575 3 /8 .5%.180 2.500 6000 .500 200 .7 140931 Dimensions are in inches.Copper-Nickel Tubing 70-30 Seamless Tubing.5 140410 3 /8 .148 1. refinery and chemical equipment.com . ■ 70-30 Copper-Nickel tubing has excellent resistance to impingement attack and other forms of corrosion in sea water.148 1 141042 .000 psi.33 141000 1 /8 .203 1. Type I.065 .375 3300 .45 140868 1 /4 .8 140915 3 /4 1. Sizes not shown may be available upon request. 6 www. Grade 1 or 2.000 3300 .750 3300 .68 141034 3 /8 .250 3300 . Specifications: pg. 60.7 141050 1.065 1 140444 1 1.37 140559 .2 140834 . All weights are approximate.315 200 . feed water heaters.050 200 .072 .540 6000 . ■ Average Mechanical Properties: Tensile 55.4 140850 .050 700 .6 141026 1 /4 .5 140606 1 1.5%.250 6000 .405 3300 . 134 .203 .563 6.660 1.000 4.alaskancopper.875 2. All weights are approximate.900 2.203 .660 1.425 .134 .5 2.458 .340 .5 2 2.340 .625 8.9 9 3 5 7 13 4.3 7.180 .000 2.5?) 2 2 2 2 21/2 21/2 21/2 21/2 3 3 3 3 31/2 31/2 31/2 4 4 4 5 5 6 6 8 8 10 12 1.660 1.375 2.70-30 Seamless Tubing.083 .072 .187 .315 1.900 1.125 .625 8.300 .875 3.900 1.5 8 6.165 .500 4.75 12.875 2.109 . Specifications: pg.875 2.500 3.4 11 19 5 9 14 6 12 19 9 15.165 .250 3.220 .095 .120 .6 3.com .250 .109 .000 4. 60.5 4 6 1.563 5.6 3 5.134 .380 .250 .500 4.6 4.284 .625 6.75 6000 200 700 1650 3300 6000 200 700 1650 3300 6000 3300 200 700 1650 3300 200 700 1650 3300 200 700 1650 3300 200 700 1650 200 700 1650 200 700 200 700 200 700 200 200 .500 4.8 2.375 2.5 12 22 17 36 26 40 231122 140452 140614 140753 140949 253857 140460 140622 140761 140957 152378 152386 140478 140630 269515 140965 140486 140648 140787 140973 140494 140656 140795 140981 140509 140664 231091 140517 140672 140800 140525 140698 140533 226850 140541 231106 417728 417126 Dimensions are in inches.625 10.660 1.380 .000 4. 7 www.095 .083 .072 . Annealed Temper (continued) Nominal Pipe Size OD Class Wall Thickness Lbs/Ft 70-30 Part Number 1 11/4 11/4 11/4 11/4 11/4 11/2 11/2 11/2 11/2 11/2 2 (1.500 5.660 1.900 1. Sizes not shown may be available upon request.500 3.500 3.120 .340 .900 1.148 .375 2.259 .095 .7 1.284 .220 .375 2. 049 .5%.1 .035 . Temper 061 (Annealed). Annealed Temper UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). offering good corrosion resistance in fresh and salt water (at moderate velocities) and exceptional heat trans fer characteristics.035 . Zinc 27. ■ Specifications: ASTM B 111. 70-30: Tensile 60.049 .049 .6 .com .7 90-10 Part Number 134192 152467 152483 152506 152548 230744 260155 230809 230833 70-30 Part Number 152302 286818 140402 140703 140711 230613 230663 230689 230710 230728 230867 Arsenical Admiralty Brass Seamless Condenser Tubing UNS Designation Number: UNS C44300. 60.2 . All weights are approximate.065 . Sizes not shown may be available upon request.049 . Nominal Chemicals: 90-10: Copper 88. ■ Arsenical Admiralty brass condenser tube is a standard condenser and heat exchanger tube.000 psi. Arsenic 0.000 psi.5%.4 . and evaporating equipment where their resistance to the corrosive action of a wide range of chemicals leads to durability and protection against contamination.1 . Nickel 30.065 .2 .96%.0%. ■ ■ OD 1 /4 1 /4 3 /8 3 /8 1 /2 1 /2 5 /8 5 /8 3 /4 3 /4 1 1 Minimum Wall . Nominal Chemicals: Copper 71%.049 .049 .55 . Iron 1. ■ Average Mechanical Properties: Tensile 52. Specifications: pg.049 .00%.000 psi. ASTM B 111. Nickel 10.45 .15 . Tin 1.049 . Temper 061 (Annealed). ■ ■ OD 3 /8 /8 1 /2 5 /8 5 /8 3 /4 3 /4 3 Minimum Wall Gauge Lbs/Ft Part Number .4 . 70-30: Copper 69. 70-30 Copper-Nickel is preferred to 90-10 Copper-Nickel where corrosion and tempera ture conditions are more severe. These tubes maintain their strength at elevated temperatures better than the brasses or copper.035 .4 . Yield 20.alaskancopper.04%.049 .049 .5 230338 230354 230370 230396 225993 230419 230435 Dimensions are in inches. 8 www.3 .4%.000 psi. Yield 18. Yield 20.2 .Seamless Condenser Tubing 90-10 & 70-30 Copper-Nickel Seamless Condenser Tubing. ■ Copper-Nickel alloys are used in industrial condensers.000 psi. heat exchangers.6%.035 . ■ Specifications: MIL-T-15005F. Iron 0. ■ Average Mechanical Properties: 90-10: Tensile 45.065 .3 . ■ Stock lengths to 26 foot.0%.1 .065 Gauge 20 18 20 18 20 18 18 16 18 16 18 16 Lbs/Ft .000 psi. ■ Stock lengths to 26 foot.35 . ASME SB-111.065 20 18 18 18 16 18 16 .35 . 500 5.563 6.340 .53 6.900 2.000 psi.065 .21 1.065 . Hardness F75.625 .000 4.563 5.068 .500 3.096 . ■ Stocked in 20 foot lengths.220 .120 .alaskancopper.94 5.000 4.065 . ■ ■ Nominal Pipe Size OD Minimum Wall Lbs/Ft Lbs/20 Ft Length Part Number 1 1 1 1 1 2 2 2 2 2 2 2 3 3 3 3 3 4 4 4 5 5 6 1. ■ Average Mechanical Properties: Tensile 45. Sizes not shown may be available upon request.375 2. 9 www.500 4.298 7.88 5.084 .500 3.900 1.134 .095 . 60.122 .51 4.875 2.5 39 44 38 49 71 121 46 70 96 59 106 141 67 98 76 123 178 106 192 146 251261 139207 263616 139215 139396 139223 139427 139443 139451 139231 139469 251279 139249 402171 139485 139257 139493 139265 139516 139524 139273 139532 139281 1 /4 1 /4 1 /2 1 /2 1 /2 /2 1 /2 1 1 /2 /2 1 Dimensions are in inches. Navy Specification Sizes MIL-T-24107B UNS Designation Number: UNS C12200. Nominal Chemicals: Copper 99.500 4.875 2.165 .107 .32 1.5 26 34. All weights are approximate.90 2.081 4.78 2.9%.60 7.065 .02%.500 4.31 1.132 .315 1.000 psi.660 1.31 3. Phosphorus . Yield 35.157 .065 . Specifications: pg.375 2.Copper Tubing Drawn Seamless Copper Tubing.065 .065 .06 2.03 3.083 .18 8. ■ Specifications: MIL-T-24107B.375 2.875 3.100 .44 3.660 1. Drawn Temper.88 3.36 4.com .375 2.33 86.72 1.79 6.90 2.33 9. 502 .065 . 60.675 .540 .165 .405 .220 .alaskancopper.637 .840 .375 .803 1.032 .250 .065 .050 1.675 .315 .032 .195 .375 .368 .612 .431 .148 .com .109 .280 .500 .065 .61 1 2 3 3 4 5 6 4 7 8 8.059 .032 .540 .250 . Navy Specification Sizes (continued) Nominal Pipe Size 1 /8 /8 1 /8 1 /4 1 /4 1 /4 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 1 /2 3 /4 3 /4 1 1 1 OD Minimum Wall Lbs/Ft Lbs/20 Ft Length Part Number .049 .71 1.092 .811 1.262 .156 .134 .42 1. All weights are approximate.500 .540 .120 .072 . 10 www.209 .032 .840 .050 1. Sizes not shown may be available upon request.188 .6 12 10 14 13 16 22 28 35 16 34 21 52 138984 138992 137441 139029 139582 139590 139150 283200 139613 228705 139053 139061 139168 139087 139176 139118 139126 139134 139142 139184 139304 139192 139346 Dimensions are in inches.065 .065 .704 .02 2.065 .095 .Copper Tubing Drawn Seamless Copper Tubing.065 .375 .065 .180 .391 .840 .065 .840 .11 1.315 1.083 .74 .840 1. Specifications: pg. 00 18. Nominal Chemicals 90-10: Copper 88.0%.065 . ■ ■ Nominal Pipe Size OD A (Min) C (Min) .1 .Copper-Nickel Butt Welding Fittings 90˚ Long Radius Elbows .083 .095 . Specifications: pg.180 38 60 75 104 142 175 212 252 435768 435776 436756 435297 435302 439055 436798 436803 Dimensions are in inches.05 1.3 .083 .5 .134 .563 6.1 .75 12.134 .00 30.065 .072 .250 .alaskancopper.250 .165 .5%.1 .250 .156 .250 . Revision D ANSI B16.660 1. Iron 0.8 1 2 3 5 9 15 34 67 96 120 157 197 243 294 350 544 781 408305 132695 408313 132718 132734 132653 129993 132938 113138 132962 132378 113251 132899 133015 132310 132255 130279 130334 130392 249248 229670 477346 477354 481939 481947 249434 266729 132750 130059 130075 130114 411641 130156 130198 130211 132823 130237 132522 437168 113536 477362 477370 3 Class 50 Nominal Wall Weight 90-10 Part Number .250 .500 4.540 .2 .00 16.180 .0%.072 .6%. Nickel 30. 58.165 .187 .00 24.095 .625 8.148 .675 .315 1.180 .75 14. ■ Nominal Chemicals 70-30: Copper 69.com .00 22.625 10. 60.4%. All weights are approximate.900 2.250 .00 1 9/32 1 5/8 1 15/16 1 19/32 2 2 7/16 2 15/16 3 23/32 4 5/8 5 13/32 6 1/4 6 31/32 8 19/32 10 11/64 13 3/8 16 9/16 19 11/16 21 1/2 24 1/2 27 1/2 30 1/2 33 1/2 36 1/2 45 1/2 54 1/2 9 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 30** 36** 3 /32 /8 7 /16 15 /32 1 /2 9 /16 11 /16 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 1 11/64 1 3/8 1 9/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 Class 200 K Nominal Wall Weight 90-10 Part Number 70-30 Part Number 1 1/2 1 1/8 1 1/2 1 7/8 2 1/4 3 3 3/4 4 1/2 5 1/4 6 7 1/2 9 12 15 18 21 24 27 30 33 36 45 54 .065 . Tolerances: pg.375 2.1 .NAVSEA 810-1385880.250 .000 4. Nickel 10. Iron 1.065 .875 3. Available in “regular” thickness (similar to Schedule 40s). ** Four piece construction.250 . 11 www.9 NAVSEA UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).00 36.125 .00 20.065 .5%.250 . Sizes not shown may be available upon request.840 1.109 .500 5.180 . 156 .250 .065 . Specifications: pg.072 .165 .4%.375 2.625 8.095 .083 .065 . Nominal Chemicals 90-10: Copper 88.065 . 58.250 .563 6.000 4.148 .00 22.180 .250 .109 .065 .75 14. Wall thicknesses for class 200.660 1.625 10.180 .315 1.180 27 28 40 52 72 126 107 126 435807 435815 436764 435255 435336 465381 436780 436811 Dimensions are in inches.065 .875 3.0%.540 .250 .5 . Revision D UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500.500 5.900 2.NAVSEA 810-1385880.840 1.180 .134 . Nickel 10.04 .125 .00 24.083 .com .095 . All weights are approximate.250 .1 .00 18.05 .5%.00 36.0%.6%.250 Weight .00 20.00 16. 12 www.2 2 3 5 9 19 38 45 60 79 100 122 148 175 272 391 Class 50 Nominal Wall Weight 90-10 Part Number .3 . size 14” and larger are per Alaskan standard.2 . Available in “regular” thickness (similar to Schedule 40s). Nickel 30. Iron 1. Iron 0.134 .187 .00 30.675 .500 4.072 . Sizes not shown may be available upon request. ■ ■ Class 200 Nominal Pipe Size B (Min) C (Min) Nominal Wall 90-10 Part Number 70-30 Part Number 45 9 477419 477435 269816 418716 229604 132679 132912 132475 113162 132336 132394 113285 113340 133065 132297 132792 130295 130350 130415 130457 477590 477443 477469 477477 477485 477493 477516 249442 270053 249450 269858 473740 113497 113528 132865 132881 130253 132548 477532 435695 477558 477605 229696 477613 1 /4 /8 1 /2 3 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 22 24 30** 36** 3 OD .alaskancopper.050 1.8 1. ■ Nominal Chemicals 70-30: Copper 69.03 .5% .00 /64 /64 1 1/16 15 /16 1 1/8 1 11/32 1 5/8 1 31/32 2 7/16 2 49/64 3 11/64 3 29/64 4 13/64 4 29/32 6 11/32 7 25/32 9 9/64 9 1/4 10 1/2 11 3/4 13 14 15 1/2 19 22 3/4 57 /32 /8 7 /16 15 /32 1 /2 9 /16 11 /16 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 1 11/64 1 3/8 1 9/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 N 3 5 /8 /16 7 /8 1 1 1/8 1 3/8 1 3/4 2 2 1/4 2 1/2 3 1/8 3 3/4 5 6 1/4 7 1/2 8 3/4 10 11 1/4 12 1/2 13 1/2 15 18 1/2 22 1/4 7 . Tolerances: pg.250 .165 .250 .250 .Copper-Nickel Butt Welding Fittings 45˚ Long Radius Elbows . 60.75 12. 180 26 41 55 70 95 135 150 176 /16 /32 23 7 8 29 32 15 16 31 32 3 32 11 64 3 8 9 16 11 16 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 / / / / 1 1 1 1 1 / / / / / / / / / / / / / / Class 50 90-10 Part Number 435784 435792 436772 435263 435344 439275 439283 Dimensions are in inches.5%.00 16.00 24.00 18. 58.500 4. 13 www. Iron 0. Sizes not shown may be available upon request.9 plus the NAVSEA tangent lengths.250 .625 8. ■ ■ Class 200 Nominal Pipe Size OD A (Min) C (Min) K Nominal Wall Weight 90-10 Part Number 70-30 Part Number Nominal Wall Weight 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 26 30 36 1.165 .75 12.5 1 1 2 2 3 6 11 19 36 66 80 105 131 162 196 233 276 363 521 413732 132459 132996 132352 132417 132433 133031 133057 132271 132506 130318 130376 130431 435205 229688 477647 477655 467838 562010 477621 262343 130106 130130 438449 130172 243250 243268 132849 132776 284337 438457 437469 477639 433855 438465 477663 .180 .alaskancopper. Sizes larger than 24” are manufactured to Alaskan dimensional standards. *Short Radius 90° are not referenced in NAVSEA.165 .563 6.134 .148 .5%.NAVSEA 810-1385880. Revision D UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).250 .250 . Tolerances: pg.Copper-Nickel Butt Welding Fittings 90˚ Short Radius Elbows .0%. Dimensions are per ANSI B16. Available in “regular” thickness (similar to Schedule 40s).com . Nominal Chemicals 90-10: Copper 88.083 .00 20.00 26.083 .250 .75 14.6%.187 .134 .109 .095 . 60.00 2 3/16 2 23/32 3 3/8 3 29/32 4 7/16 4 31/32 6 3/32 7 11/64 9 3/8 11 9/16 13 11/16 14 1/2 16 1/2 18 1/2 20 1/2 22 1/2 24 1/2 26 1/2 30 1/2 36 1/2 11 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 26 30 36 .900 2.250 .00 36.00 22. Nickel 10.250 .250 .0%. All weights are approximate. ** ANSI B 16.180 .000 4.500 5.250 .875 3.072 .9 dimensions up to and including 24” size. Iron 1.180 .625 10.156 .125 .4%. ■ Nominal Chemicals 70-30: Copper 69.250 .375 2.250 . Nickel 30.00 30.095 . Specifications: pg. 083 .75 x 8.com .250 .5 x 3.75 x 6.Copper-Nickel Butt Welding Fittings 90˚ Reducing Long Radius Elbows .0%.187 .625 x 4.75 14 x 12. All weights are approximate.250 . Specifications: pg.562 x 4.5 6.5 4.109 .0 x 3.250 .5 x 2.095 . Available in “regular” thickness (similar to Schedule 40s).625 10.250 .5 x 2.9 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).250 .5 5.625 x 5.375 x 1.75 16 x 14 18 x 16 20 x 18 22 x 20 24 x 22 30 x 24 36 x 30 3 23/32 5 13/32 5 13/32 5 13/32 6 1/4 6 31/32 8 19/32 10 11/64 10 11/64 13 3 / 8 13 3 / 8 16 9/16 16 9/16 19 11/16 21 1/2 24 1/2 27 1/2 30 1/2 33 1/2 36 1/2 45 1/2 54 1/2 23 11 29 9 /32 /32 29 /32 29 /32 15 /16 31 /32 1 3/32 1 11/64 1 11/64 1 3/8 1 3/8 1 9/16 1 9/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 /16 /16 23 /32 7 /8 29 /32 29 /32 31 /32 31 /32 1 3/32 1 3/32 1 11/64 1 11/64 1 3/8 1 9/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 K Nominal Wall Weight 3 4.5 6.90 3.250 . ■ Nominal Chemicals 70-30: Copper 69. Nominal Chemicals 90-10: Copper 88.75 x 10.134 .375 3.8 2 2 2 3 4 8 14 14 24 24 47 48 88 114 148 186 231 281 334 490 716 90-10 Part Number 70-30 Part Number 275118 475849 438473 437223 435409 431853 431861 435271 431879 431887 431895 477833 431900 465496 274560 477697 477702 477728 477744 477752 476829 477760 477786 477809 477817 477859 477867 477883 Note: Sizes and reductions not shown are available on request.562 8.4%.625 x 5.25 6 7 1/2 9 9 12 12 15 15 18 21 24 27 30 33 36 45 54 .875 4.625 12.134 .148 . Iron 0.187 .562 8.NAVSEA 810-1385880.5 4. Revision D ANSI B16. 58.250 .5%.66 3. Dimensions are in inches.095 . ■ ■ Nominal Pipe Size OD A (Min) C1 (Min) C2 (Min) 2 x 1 1/2 3 x 1 1/4 3x2 3 x 2 1/2 3 1/2 x 3 4x3 5x4 6x4 6x5 8x5 8x6 10 x 6 10 x 8 12 x 10 14 x 12 16 x 14 18 x 16 20 x 18 22 x 20 24 x 22 30 x 24 36 x 30 2. 14 www.095 .0%. Iron 1. 60.6%.250 .alaskancopper. Nickel 10.625 10.125 .148 .5%. Tolerances: pg.5 x 1.5 5.625 x 6. Nickel 30.250 .095 .5 4. 00 36.9 1.134 .250 .com . Available in “regular” thickness (similar to Schedule 40s).148 .563 6.5 10 18 30 54 106 192 240 314 394 486 588 698 1088 1562 /2 /16 11 /16 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 1 11/64 1 3/8 1 9/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 9 90-10 Part Number 70-30 Part Number 293572 113756 113780 113811 113845 113586 431950 113617 113641 113675 113706 477891 477906 477914 477922 477948 447545 477956 477964 477972 477998 478009 180˚ return bends are also available in short radius configurations (radii dimensions per ANSI B 16.625 8.00 30.9 dimensions up to and including 24” size.065 .109 .250 .072 . 60. All weights are approximate.75 14.660 1.00 20.125 .875 3. * ANSI B16.095 .250 . Tolerances: pg. Sizes larger than 24” are manufactured to Alaskan dimensional standards.500 4.00 22. Specifications: pg. Dimensions are in inches.315 1.250 .187 .250 .250 .00 3 3 3/4 4 1/2 6 7 1/2 9 10 1/2 12 15 18 24 30 36 42 48 54 60 66 72 90 108 C (Min) A (Min) J K* Class 200 Nom.Copper-Nickel Butt Welding Fittings 180˚ Long Radius Return Bends . Revision D ANSI B16. Wall Weight 1 2 2 7/16 2 15/16 3 23/32 4 5/8 5 13/32 6 1/4 6 31/32 8 19/32 10 11/64 13 3/8 16 9/16 19 11/16 21 1/2 24 1/2 27 1/2 30 1/2 33 1/2 36 1/2 45 1/2 54 1/2 3 3 3/4 4 1/2 6 7 1/2 9 10 1/2 12 15 18 24 30 36 42 48 54 60 66 72 90 108 1 1/2 1 7/8 2 1/4 3 3 3/4 4 1/2 5 1/4 6 7 1/2 9 12 15 18 21 24 27 30 33 36 45 54 .6 .072 .250 .000 4.095 .625 10.75 12.4 .083 .900 2.9 ■ ■ ■ Nominal Pipe Size OD C-C (Min) 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 30 36 1. 15 www.5 4 6.00 24.00 16.250 .250 .500 5. Sizes not shown may be available upon request.5 2.083 .00 18. 58.NAVSEA 810-1385880.375 2.28).alaskancopper. Copper-Nickel Butt Welding Fittings Straight Tees - NAVSEA 810-1385880, Revision D NAVSEA ANSI B16.9 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). Nominal Chemicals 90-10: Copper 88.6%, Nickel 10.0%, Iron 1.4%. ■ Nominal Chemicals 70-30: Copper 69.5%, Nickel 30.0%, Iron 0.5%. ■ ■ Nominal Pipe Size OD Dimensions C E (Min) 1 11 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 30 36 3 .540 .675 .840 1.05 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625 10.75 12.75 14.00 16.00 18.00 20.00 22.00 24.00 30.00 36.00 /16 /32 1 3/32 1 1/4 1 1/2 1 7/8 2 1/4 2 1/2 3 3 3/8 3 3/4 4 1/8 4 7/8 5 5/8 7 8 1/2 10 11 12 13 1/2 15 16 1/2 17 22 26 1/2 29 K* Class 200 Class 50 Nominal 90-10 Part 70-30 Part Nominal Wall Weight Number Number Wall 1 1 1/8 1 1/2 1 7/8 2 1/4 2 1/2 3 3 3/8 3 3/4 4 1/8 4 7/8 5 5/8 7 8 1/2 10 11 12 13 1/2 15 16 1/2 17 22 26 1/2 .065 .065 .065 .065 .065 .072 .072 .083 .083 .095 .095 .109 .125 .134 .148 .187 .250 .250 .250 .250 .250 .250 .250 .250 .250 9 /32 /8 7 /16 15 /32 1 /2 9 /16 11 /16 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 1 11/64 1 3/8 1 9/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 3 .03 .05 .1 .2 .3 .4 .6 1 2 3 4 5 8 11 22 46 83 88 112 140 165 182 222 277 333 413415 413423 413431 413449 127543 127577 127585 127624 127747 127828 128028 128109 128248 132637 128264 128280 128303 128329 431926 478025 478033 478059 478075 478091 478114 236245 127658 127860 127844 259421 230998 128484 231009 111657 111681 437207 478130 478156 .134 .156 .165 .165 Weight 90-10 Part Number 27 52 58 75 439110 465535 454681 478164 562337 Dimensions are in inches. All weights are approximate. Specifications: pg. 60. Tolerances: pg. 58. * ANSI B16.9 dimensions. For sizes 26” and larger, outlet dimension “K” is recommended, but not mandatory. Sizes not shown may be available upon request. Available in “regular” thickness (similar to Schedule 40s). 16 www.alaskancopper.com Copper-Nickel Butt Welding Fittings Reducing Tees - NAVSEA 810-1385880, Revision D NAVSEA ANSI B16.9 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). Nominal Chemicals 90-10: Copper 88.6%, Nickel 10.0%, Iron 1.4%. ■ Nominal Chemicals 70-30: Copper 69.5%, Nickel 30.0%, Iron 0.5%. ■ ■ Nominal Pipe Size OD K M 1 1/4 x 1 1/4 x 3/4 1.66 x 1.66 x 1.05 1 7/8 1 11/16 9 /16 13 1 3/4 9 /16 7 /16 3 /16 13 /16 7 /16 1 /32 3 /32 13 /32 7 /16 /32 1 /32 5 x 1 x 1.315 1 7/8 1 /2 x 1 /2 x /2 1.90 x 1.90 x .840 2 /4 1 /4 11 x 3 /4 x 1.05 2 1/4 1 13/16 11 x 1 x 1.315 2 /4 1 /8 11 x 1 1 /4 x 1.66 2 1/4 2 11 x 1 /2 2.375 x 2.375 x .840 2 1/2 1 15/16 23 x /4 x 1.05 2 /2 2 23 x 1 x 1.315 2 1/2 2 1/16 23 x 1 /4 x 1.66 1 2 /2 3 2 /16 23 x 1 1 /2 x 1.90 2 1/2 2 7/16 23 5 1 2 1 x 2 1 1 2 /2 x 2 /2 x 1 1 3 2.875 x 2.875 x 1.315 3 90-10 Part Number 70-30 Part Number 1 7/8 1 7/8 .072 .4 259366 478211 /16 1 7/8 1 7/8 .072 .4 265511 478237 /8 1 2 /4 1 2 /4 .072 .6 231041 478245 2 1/4 2 1/4 .072 .6 259358 478853 /16 1 2 /4 1 2 /4 .072 .6 265529 478279 /2 2 1/4 2 1/4 .072 .6 127616 478287 /8 2 1/2 1 3/4 .083 .8 127674 478300 2 /2 1 /4 .083 .8 249345 478326 2 1/2 2 .083 .8 127682 478342 /2 1 2 /2 1 2 /4 .083 .8 127705 478350 /8 2 1/2 2 1/4 .083 1 127721 478376 1 /32 /32 /32 1 3 2 /16 /8 /16 3 2 /4 .083 1 127763 473148 2 7/`16 7 /8 1 /2 3 2 1/2 .083 1 231059 468232 x 1 1 /2 x 1.90 3 2 11/16 7 /8 5 /8 3 2 5/8 .083 1.5 127789 420242 x 2 x 2.375 3 3 2 /4 7 /8 21 3 3 2 /4 .083 1.5 127802 478392 x .840 3 3/8 2 1/2 29 3 3/8 2 1/2 .095 2 127886 478407 x /4 x 1.05 3 /8 9 2 /16 29 3 9 x 1 x 1.315 3 3/8 2 5/8 29 x 1 1 /4 x 1.66 3 3/8 2 3/4 29 x 1 /2 x 1.90 3 /8 3 29 x 2 x 2.375 3 3/8 3 1/16 29 3 x 2.875 3 /8 5 3 /16 29 x 1.90 3 3/4 3 1/4 15 5 x 1 /2 3.5 x 3.5 x 2 /2 17 Weight 3 3 1/2 x 3 1/2 x 1 1/2 x 5 Nominal Wall x 1.66 1 5 Q x 1 1 /4 1 x 4 7 E 7 3 4 1 3 G (Min) 7 1 x 3 1 1 3 C (Min) 4 x 4 3 3 3 /32 13 3 /8 2 /16 .095 2 127909 478423 /32 7 /16 3 3/8 2 5/8 .095 2 127925 473164 /32 1 /2 3 3/8 2 3/4 .095 2 127941 478431 /32 5 /8 /32 21 /32 25 /16 5 /16 21 /16 21 /16 21 /32 5 /32 21 /32 25 /32 27 x 2 x 2.375 3 /4 3 /16 15 x 2 1 /2 x 2.875 3 3/4 3 9/16 15 x 3 x 3.5 3 3/4 3 11/16 15 x 1.90 4 1/8 3 1/2 31 x 1 1 /2 3 4.5 x 4.5 /32 /32 /8 /32 3 /8 2 /8 .095 2 127967 473122 /32 3 3/8 3 .095 2 127983 266737 /32 3 3 /8 1 3 /4 .095 2 128002 473130 3 3/4 3 1/8 .095 3 128060 478465 /32 3 3 /4 1 3 /4 .095 3 243080 478481 /32 3 3/4 3 1/2 .095 3 128044 478504 /32 3 3/4 3 5/8 .095 4 128086 478512 4 1/8 3 3/8 .109 4 128125 128141 /32 4 1/8 3 1/2 .109 4 128167 478538 /32 4 1/8 3 3/4 .109 4 128183 413601 /32 4 1/8 3 7/8 .109 4 128206 478554 4 1/8 4 .109 4.5 111607 478570 /32 4 7/8 4 1/8 .125 7 128832 478596 /32 4 7/8 4 1/4 .125 7 128816 478619 /32 7 4 /8 3 4 /8 .125 7 128793 478635 4 7/8 4 1/2 .125 7 128777 292924 4 7/8 4 5/8 .125 7.5 132611 478651 /8 /8 x 2 x 2.375 4 1/8 3 9/16 31 x 2 1 /2 x 2.875 4 1/8 3 13/16 31 x 3 x 3.5 4 1/8 3 15/16 31 x 3 1 /2 x 4 4 1/8 4 31 /32 7 4 5/16 1 3/32 21 x 2 5.56 x 5.56 x 2.375 4 7/8 /8 x 2 1 /2 x 2.875 4 7/8 4 3/8 1 3/32 25 x 3 x 3.50 7 4 /8 7 4 /16 3 1 /32 27 x 3 1 /2 x 4.00 4 7/8 4 9/16 1 3/32 7 x 4 x 4.50 4 7/8 4 5/8 1 3/32 29 /8 /32 3 7 Sizes and reductions not shown are available on request. Dimensions are in inches. All weights are approximate. Specifications: pg. 60. Tolerances: pg. 58. Sizes not shown may be available upon request. Available in “regular” thickness (similar to Schedule 40s). www.alaskancopper.com Copper-Nickel Butt Welding Fittings Reducing Tees - NAVSEA 810-1385880, Revision D (continued) Nominal Pipe Size 6 x 6 M C (Min) G (Min) 5 5/8 4 13/16 1 11/64 21 x 2.875 5 /8 5 /16 11 1 /64 25 x 3.5 5 5/8 5 1 11/64 27 x 3 1/2 x 4.0 5 5/8 5 1/16 1 11/64 7 x 4 x 4.5 5 5 /8 1 5 /8 x 5 x 5.562 5 5/8 5 3/8 OD K 6.625 x 6.625 x 2.375 x 2 /2 x 3 x 2 1 8 x 8 x 2 /2 12 14 16 18 20 24 30 36 18 x 12 x 14 x 16 x 18 x 20 x 24 x 30 x 36 90-10 Part Number 70-30 Part Number /32 5 5/8 4 3/4 .134 10 231033 478669 /32 5 5 /8 3 4 /4 .134 10 128670 478685 /32 5 5/8 4 7/8 .134 10 128696 478708 5 5/8 5 .134 10 128719 478716 1 /64 29 /32 5 5 /8 1 5 /8 .134 10.5 128735 111746 1 11/64 1 1/32 5 5/8 5 3/8 .134 11 128751 259502 3 /32 7 6 .148 20 128638 478724 /32 7 6 .148 20 272958 466793 11 /8 7 5 /8 1 /8 7 6 1 3/8 27 x 3 /2 x 4 7 1 6 /16 3 1 /8 7 7 6 .148 20 128468 478732 x 4 x 4.5 7 6 1/8 1 3/8 29 /32 7 6 1/8 .148 20.5 128442 471683 x 5 x 5.562 7 6 3/8 1 3/8 1 1/32 7 6 3/8 .148 21 128426 406599 x 6 x 6.625 9 5 1 x 10 Nominal Wall Weight x 3.5 x 3 10 1 Q 25 1 8.625 x 8.625 x 2.875 5 E 7 /8 7 6 /16 1 /8 1 /8 x 3 10.75 x 10.75 x 3.5 8 1/2 7 1/16 1 9/16 27 7 6 /8 .148 21.5 128400 454649 /32 8 1/2 7 1/4 .187 41 231025 x 4 x 4.5 1 8 /2 3 478740 1 /16 29 /32 1 8 /2 1 7 /16 x 5 x 5.562 8 1/2 7 7/16 7 /4 .187 41 128573 259497 1 9/16 1 1/32 8 1/2 7 1/2 .187 42 128531 462244 7 /8 9 1 /16 1 x 6 x 6.625 8 /2 x 8 x 8.625 8 1/2 1 /8 8 /2 7 /8 .187 43 128557 439071 8 1 9/16 1 5/16 8 1/2 8 .187 44 128387 x 5 12.75 x 12.75 x 5.562 478758 10 8 7/16 1 11/16 1 1/32 10 8 1/2 .250 74 128612 478766 x 6.625 10 8 /8 11 1 /16 1 x 6 x 8 1 /8 10 8 /8 .250 76 128599 478774 x 8.625 10 9 1 11/16 1 5/16 10 9 .250 78 128361 478782 x 10.75 10 9 /8 1 /16 1 1 /32 10 1 x 10 9 /2 .250 81 128345 473009 x 6.625 11 9 3/8 1 /2 1 1/8 11 9 3/8 .250 80 461921 478805 x 8 x 8.625 11 9 3/4 1 /2 1 5/16 11 9 3/4 .250 82 437998 478813 x 10 x 10.75 11 10 /8 1 /2 1 1 /2 11 10 /8 .250 84 436722 478839 x 12 x 12.75 11 10 5/8 1 /2 1 1/8 11 10 5/8 .250 86 436730 478855 x 8.625 12 10 3/4 1 /2 1 5/16 12 10 3/4 .250 102 478889 478902 x 10 x 10.75 12 11 1/8 1 /2 1 1/2 12 11 1/8 .250 105 445632 473449 x 12 x 12.75 12 11 5/8 1 /2 1 5/6 12 11 5/8 .250 107 439089 478928 x 14 x 14 12 12 1 /2 1 /2 12 12 .250 109 293394 478944 x 10.75 13 1/2 12 1/8 1 /2 1 1/2 13 1/2 12 1/8 .250 127 562264 x 12 x 12.75 13 1/2 12 5/8 1 /2 1 5/8 13 1/2 12 5/8 .250 130 x 14 x 14 13 /2 13 1 /2 1 1 /2 13 /2 13 .250 133 x 16 x 16 13 1/2 13 1 /2 1 1/2 13 1/2 13 .250 135 x 12.75 15 13 5/8 1 /2 1 5/8 15 13 5/8 .250 153 x 14 x 14 15 14 1 /2 1 1/2 15 14 .250 156 x 16 x 16 15 14 1 /2 1 1/2 15 14 .250 158 x 18 x 18 15 14 1/2 1 /2 1 1/2 15 14 1/2 .250 160 x 14 17 16 1 /2 1 1/2 17 16 .250 204 x 16 x 16 17 16 1 /2 1 1/2 17 16 .250 208 x 18 x 18 17 16 1/2 1 /2 1 1/2 17 16 1/2 .250 211 x 20 x 20 17 17 1 /2 1 1/2 17 17 .250 214 x 18 22 19 1/2 1 /2 1 1/2 22 19 1/2 .250 256 x 20 x 20 22 20 1 /2 1 1/2 22 20 .250 261 x 24 x 24 22 21 1 /2 1 1/2 22 21 .250 267 x 20 26 1/2 23 1 /2 1 1/2 26 1/2 23 .250 306 x 24 x 24 26 /2 24 1 /2 1 1 /2 26 /2 24 .250 314 x 30 x 30 26 1/2 25 1 /2 1 1/2 26 1/2 25 .250 x 6 x 8 x 10 x 12 x 14 x 18 x 20 14 16 18 20 24 30 36 x 14 x 16 x 18 x 20 x 24 x 30 x 36 Note: Sizes and reductions not shown are available. Dimensions are in inches. All weights are approximate. Specifications: pg. 60. Tolerances: pg. 58. 1 5 5 3 1 1 1 3 9 11 1 1 1 5 5 1 1 1 Sizes not shown may be available upon request. Available in “regular” thickness (similar to Schedule 40s). 469018 322 * ANSI B16.9 dimensions. For sizes 26” and larger, outlet dimension “K” is recommended, but not mandatory. www.alaskancopper.com 0%.095 .109 . Nominal Chemicals 90-10: Copper 88. ■ ■ Nominal Pipe Size 1 /2 x 1/4 /2 x 3/8 3 /4 x 1/2 1 x 1/2 x 3/4 1 1/4 x 3/4 x1 1 1/2 x 1/2 x 3/4 x1 x 1 1/4 2 x 1/2 x 3/4 x1 x 1 1/4 x 1 1/2 1 2 /2 x 3/4 x1 x 1 1/4 x 1 1/2 x2 3x1 x 1 1/4 x 1 1/2 x2 x 2 1/2 1 3 /2 x 1 x 1 1/2 x2 x 2 1/2 x3 4x1 x 1 1/4 x 1 1/2 x2 x 2 1/2 x3 x 3 1/2 1 OD L .840 x .840 x 1.05 x 1.90 2.5 x 1.083 . ■ Nominal Chemicals 70-30: Copper 69.065 .315 x 1.90 x 2.315 x .083 .095 .375 x 2.3 .2 .5%. 19 www.315 x 1.7 .5 x4 1 1/2 1 1/2 1 1/2 2 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4 4 4 4 4 4 4 4 C1 (Min) C2 (Min) Nominal Wall Weight 90-10 Part Number 70-30 Part Number 7 9 .66 x 1.095 . Nickel 30.7 .9 .840 x 1.0%.4%.5 4.3 .095 .15 .109 .05 x 1.315 x 1.9 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 559889 509038 253035 130465 130481 130504 130546 229701 130562 130588 130643 273425 130619 130693 130732 130774 130813 130839 130855 130871 130910 111893 130960 130986 131021 131089 409539 131128 131152 131178 131209 400187 402846 131225 131241 131275 131330 131372 482587 482595 478978 478994 265163 479013 111869 479047 439843 131144 130677 479055 130635 130708 130758 130790 479063 479089 272631 130897 130936 479102 479110 131005 131055 131110 479128 479136 229785 111924 435425 479152 479178 479194 229939 131291 249256 249264 /16 /16 15 /32 1 /2 1 /2 9 /16 9 /16 11 /16 11 /16 11 /16 11 /16 23 /32 23 /32 23 /32 23 /32 23 /32 7 /8 7 /8 7 /8 7 /8 7 /8 29 /32 29 /32 29 /32 29 /32 29 /32 15 /16 15 /16 15 /16 15 /16 15 /16 31 /32 31 /32 31 /32 31 /32 31 /32 31 /32 31 /32 7 /32 /8 7 /16 7 /16 15 /32 15 /32 1 /2 7 /16 15 /32 1 /2 9 /16 7 /16 15 /32 1 /2 9 /16 11 /16 15 /32 1 /2 9 /16 11 /16 23 /32 1 /2 9 /16 11 /16 23 /32 7 /8 1 /2 11 /16 23 /32 7 /8 29 /32 1 /2 9 /16 11 /16 23 /32 7 /8 29 /32 15 /16 3 Sizes and reductions not shown are available. 60.065 .90 x 2.315 x 1.072 . Available in “regular” thickness (similar to Schedule 40s).083 .840 1.07 .66 x 1. Nickel 10.2 .15 . Dimensions are in inches.90 x .66 x 1.9 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).072 .66 x 1.083 .083 .072 .05 x 1.109 . Revision D NAVSEA ANSI B16.540 .alaskancopper.109 .9 .065 . All weights are approximate.90 x 2.095 .09 .875 x 1.840 x 1.com .375 x 2.375 3.109 .3 .07 . Sizes not shown may be available upon request.9 .5 x 1.NAVSEA 810-1385880. Iron 0.6%.315 x 1.095 .065 .095 .095 .7 . 58.875 x 3.072 .3 .66 x 1.083 .072 .109 .7 .05 x 1.9 .66 2.315 x 1.875 x 3.875 4 x 1. Iron 1. Tolerances: pg.083 .095 .109 .083 .90 x 2.675 1.375 x 2.095 .7 .072 .083 .375 x .840 x .05 1.315 1.083 .Copper-Nickel Butt Welding Fittings Concentric Reducers .065 . Specifications: pg.05 x .5%. 125 .250 . Revision D (continued) Nominal Pipe Size 5x2 x 2 1/2 x3 x 3 1/2 x4 6x2 x 2 1/2 x3 x 3 1/2 x4 x5 8x3 x 3 1/2 x4 x5 x6 10 x 4 x5 x6 x8 12 x 5 x6 x8 x 10 14 x 6 x8 x 10 x 12 16 x 8 x 10 x 12 x 14 18 x 10 x 12 x 14 x 16 20 x 12 x 14 x 16 x 18 24 x 14 x 16 x 18 x 20 30 x 18 x 20 x 24 36 x 30 OD 5.75 16 x 8.562 x 6.250 .134 .000 x 4.375 x 2.250 . Dimensions are in inches.625 x 8.165 .125 .134 .alaskancopper.75 x 12.5 27 38 41 44 49 44 47 51 53 55 58 61 65 89 95 101 106 106 112 118 123 161 168 181 222 90-10 Part Number 131429 131445 131479 131518 131550 131576 131592 131623 111958 131649 131704 131712 131746 131754 131801 131843 131893 131932 131958 131990 479330 132035 132051 132108 433813 132140 132166 132190 402147 112077 112108 132239 439128 439136 465331 449678 467163 562492 436837 70-30 Part Number 479217 229971 131495 249272 230207 471895 479241 437100 236253 131665 111982 479267 479283 236229 112019 131869 479306 479322 112043 132019 479356 483012 421808 132124 479429 460789 132174 249337 479445 479461 404131 479495 479518 479542 479568 479584 Class 50 Nominal Wall Weight 90-10 Part Number .250 . 20 www.562 x 6.75 x 5.250 .165 .75 x 12.250 .250 .500 x 5.156 .250 .187 . 58.625 x 8. Specifications: pg.148 .250 .000 x 4.75 x 14 x 16 20 x 12.625 x 3.375 x 2.180 10 12 12 12 15 15 15 17 29 29 29 29 35 35 35 35 39 39 39 39 64 435857 439445 439097 435865 479649 446963 435831 435849 479665 439699 435289 437891 479673 435580 435556 436748 479681 439144 435328 439209 439291 .250 .134 .500 x 4.134 .250 .250 .187 .250 .134 .625 x 10.625 x 2.250 Weight 4 4 4 4 4 5 5 4 4 5 5 6 6.875 x 3.148 .500 x 4.250 .250 .180 .134 .134 .500 x 5.625 x 8.875 x 3.125 .250 .165 .165 .500 x 4.500 6.125 . Tolerances: pg.148 .134 .NAVSEA 810-1385880.250 .500 x 5.250 .562 8. Sizes not shown may be available upon request.com .156 .250 . All weights are approximate.250 .165 .125 .250 .187 .134 .148 .250 161 168 181 461086 Note: Sizes and reductions not shown are available.5 7 7 8 14 15 16 18 21 22 23.562 x 2.250 .250 .180 . Available in “regular” thickness (similar to Schedule 40s).187 .250 .156 .148 .625 10.250 .250 .75 x 14 18 x 10.134 .165 .625 x 10.180 90 461078 .75 x 12.180 .156 . 60.75 14 x 6.165 .75 x 14 x 16 X 18 24 X 14 x 16 x 18 X 20 30 X 18 x 20 x 24 36 X 30 L 5 5 5 5 5 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 6 6 6 6 6 7 7 7 7 8 8 8 8 13 13 13 13 14 14 14 14 15 15 15 15 20 20 20 20 20 20 20 20 24 24 24 24 C1 (Min) 1 3/32 1 3/32 1 3/32 1 3/32 1 3/32 1 11/64 1 11/64 1 11/64 1 11/64 1 11/64 1 11/64 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 9/16 1 9/16 1 9/16 1 9/16 1 11/16 1 11/16 1 11/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 Class 200 C2 (Min) 23 /32 7 /8 29 /32 15 /16 31 /32 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 29 /32 15 /16 31 /32 1 3/32 1 11/64 31 /32 1 3/32 1 11/64 1 3/8 1 3/32 1 11/64 1 3/8 1 9/16 1 11/64 1 3/8 1 9/16 1 11/16 1 3/8 1 9/16 1 11/16 1 /2 1 9/16 1 11/16 1 /2 1 /2 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 Nominal Wall .Copper-Nickel Butt Welding Fittings Concentric Reducers .625 12.000 x 4.625 x 10.180 .562 x 6.250 .165 .75 x 4. 095 .9 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 479699 405098 479712 130520 438635 402155 437752 430572 408452 479746 411625 465747 411617 430580 479762 406793 411617 229727 229735 476992 479788 462090 131063 229777 479835 472273 229793 479843 229808 479877 479908 411463 131259 131314 131356 131398 479924 479940 479966 479982 479990 480014 480022 480048 480056 480072 468999 480098 480111 480137 480145 480161 480111 480187 480195 480200 480349 480357 480365 480373 480381 480399 480404 480412 480420 480438 480446 480454 274510 480462 281339 480470 1 /16 /16 15 /32 15 /32 1 /2 7 /16 15 /32 1 /2 9 /16 7 /16 15 /32 1 /2 9 /16 11 /16 15 /32 1 /2 9 /16 11 /16 23 /32 1 /2 9 /16 11 /16 23 /32 7 /8 1 /2 11 /16 23 /32 7 /8 29 /32 1 /2 9 /16 11 /16 23 /32 7 /8 29 /32 15 /16 7 Sizes and reductions not shown are available.90 2.840 x 1.90 x .2 .065 .9 .109 .3 .4%.095 . Nickel 10.109 . Available in “regular” thickness (similar to Schedule 40s).875 x 3.3 .315 x 1.90 x 2.375 3. ■ Nominal Chemicals 70-30: Copper 69.375 x 2. Nickel 30. 58.66 x 1.072 .05 x 1.840 x 1.095 .05 1.5%.840 1.315 x 1.072 .90 x 2.095 .083 .2 .Copper-Nickel Butt Welding Fittings Eccentric Reducers . 21 www. Sizes not shown may be available upon request.083 .083 .083 . Iron 0.065 .072 .NAVSEA 810-1385880.09 .5 x 1.095 .90 x 2.109 .315 x 1. Specifications: pg. Revision D NAVSEA ANSI B16.072 .109 .66 2.05 x 1.109 .7 .083 .9 .375 x .315 x .15 .com .315 x 1.5 x4 1 1/2 2 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4 4 4 4 4 4 4 4 15 /32 /2 1 /2 9 /16 9 /16 11 /16 11 /16 11 /16 11 /16 23 /32 23 /32 23 /32 23 /32 23 /32 7 /8 7 /8 7 /8 7 /8 7 /8 29 /32 29 /32 29 /32 29 /32 29 /32 15 /16 15 /16 15 /16 15 /16 15 /16 31 /32 31 /32 31 /32 31 /32 31 /32 31 /32 31 /32 7 .083 .3 .083 .7 .095 .9 . ■ ■ Nominal Pipe Size OD L C1 (Min) C2 (Min) Nominal Wall Lbs/Ft 90-10 Part Number 70-30 Part Number 3 /4 x 1/2 1 x 1/2 x 3/4 1 1/4 x 3/4 x1 1 1/2 x 1/2 x 3/4 x1 x 1 1/4 2 x 1/2 x 3/4 x1 x 1 1/4 x 1 1/2 1 2 /2 x 3/4 x1 x 1 1/4 x 1 1/2 x2 3x1 x 1 1/4 x 1 1/2 x2 x 2 1/2 1 3 /2 x 1 x 1 1/2 x2 x 2 1/2 x3 4x1 x 1 1/4 x 1 1/2 x2 x 2 1/2 x3 x 3 1/2 1.0%.alaskancopper.875 4 x 1.05 x 1.7 . Nominal Chemicals 90-10: Copper 88.083 .7 .875 x 1.315 x 1. Iron 1.095 .875 x 3.065 .7 . 60.109 .5 x 1.90 x 2.840 x 1.66 x 1.083 . All weights are approximate.15 . Dimensions are in inches.9 .315 1.05 x 1.66 x 1.315 x 1.095 .05 x .66 x 1.375 x 2. Tolerances: pg.095 .072 .6%.375 x 2.9 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).095 .5%.66 x 1.072 .3 .5 4.083 .0%.109 . 250 .250 .5 27 38 41 43.5 47 50. Available in “regular” thickness (similar to Schedule 40s).187 . All weights are approximate.NAVSEA 810-1385880.125 .5 7 7 8 14 15 16 18 21 22 23.250 .75 x 12.134 .250 . Sizes not shown may be available upon request.5 x 5.75 x 12.75 x 14 x 16 5 5 5 5 5 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 6 6 6 6 6 7 7 7 7 8 8 8 8 13 13 13 13 14 14 14 14 15 15 15 15 1 3/32 1 3/32 1 3/32 1 3/32 1 3/32 1 11/64 1 11/64 1 11/64 1 11/64 1 11/64 1 11/64 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 9/16 1 9/16 1 9/16 1 9/16 1 11/16 1 11/16 1 11/16 1 11/16 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 23 .125 .625 x 8.375 x 2. Specifications: pg. Revision D (continued) Nominal Pipe Size OD L C1 (Min) C2 (Min) Nominal Wall Lbs/Ft 90-10 Part Number 70-30 Part Number 5x2 x 2 1/2 x3 x 3 1/2 x4 6x2 x 2 1/2 x3 x 3 1/2 x4 x5 8x3 x 3 1/2 x4 x5 x6 10 x 4 x5 x6 x8 12 x 5 x6 x8 x 10 14 x 6 x8 x 10 x 12 16 x 8 x 10 x 12 x 14 18 x 10 x 12 x 14 x 16 5.250 .5 x 5.75 x 12. Tolerances: pg.250 .250 .625 x 8.625 x 8.125 .250 .875 x 3.562 8.134 .75 16 x 8.625 x 10.5 480488 131453 230192 131534 293603 480608 411544 249298 249280 131681 236211 480496 480501 131770 131819 131877 284688 230095 131974 230100 480519 437150 132077 230231 414649 293409 293417 132213 480527 435239 230566 435247 480535 435221 465323 435213 480543 480569 480577 480585 480593 480624 480658 480674 480705 480721 480747 480789 480802 411112 480836 480860 480894 480917 411633 414550 480925 480941 480959 421874 480967 480975 480991 481028 481044 481060 404694 481086 481109 481141 481167 481175 /32 /8 29 /32 15 /16 31 /32 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 29 /32 15 /16 31 /32 1 3/32 1 11/64 31 /32 1 3/32 1 11/64 1 3/8 1 3/32 1 11/64 1 3/8 1 9/16 1 11/64 1 3/8 1 9/16 1 11/16 1 3/8 1 9/16 1 11/16 1 /2 1 9/16 1 11/16 1 /2 1 /2 7 Note: Sizes and reductions not shown are available.250 .134 .75 x 4.134 .875 x 3.Copper-Nickel Butt Welding Fittings Eccentric Reducers .625 12.250 . 60.625 x 10.250 .75 14 x 6.500 x4 x 4.5 x 5.5 48.250 .187 .5 x4 x 4. 22 www.5 6.375 x 2.5 53 54.562 x 6.625 x 2.5 58 60.148 .187 .75 x 14 18 x 10.148 .com .75 x 5.250 4 4 4 4 4 5 5 4 4 5 5 6 6. 58.5 x4 x 4.562 x 6.alaskancopper.625 x 10.5 64.250 .148 .250 .5 43.134 .625 10.148 .562 x 6.187 . Dimensions are in inches.125 .134 .125 .625 x 3.148 .250 .562 x 2. Iron 0.NAVSEA 810-1385880.109 .375 2.9 1 1.0%.083 .000 4.875 3.500 5.095 . Available in “regular” thickness (similar to Schedule 40s). 23 www.109 .NAVSEA 810-1385880.072 .375 2. Single Sweep .072 .Copper-Nickel Butt Welding Fittings Long Turn Tees.500 4.625 8.4%.6%.5 3 5 3 5 7. ■ Nominal Chemicals 70-30: Copper 69. Double Sweep . Revision D Nominal Pipe Size OD A 1 1 1 2 2 3 3 4 5 6 8 1. Revision D UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).5 14 24 46 /2 /16 11 /16 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 1 11/64 1 3/8 9 90-10 Part Number 70-30 Part Number 481298 511394 481311 261575 286119 132598 470051 132572 129951 129977 231017 462414 481353 481379 481395 461662 462383 462391 462406 Sizes not shown may be available upon request. Iron 1.065 . ■ ■ Nominal Pipe Size OD A E 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 1.072 .625 2 2 7/16 2 15/16 3 23/32 4 5/8 5 13/32 6 1/4 6 31/32 8 19/32 10 11/64 13 3/8 1 /4 1 /2 1 /2 1 /2 C (Min) Nominal Wall Weight 1 .134 .095 .875 3. Nominal Chemicals 90-10: Copper 88.500 4.625 10.187 .750 2 7/16 2 15/16 3 23/32 4 5/8 5 13/32 6 1/4 6 31/32 8 19/32 10 11/64 13 3/8 16 9/16 2 2 1/4 2 5/8 3 1/8 3 13/32 3 7/16 3 31/32 5 3/32 6 11/64 8 7/8 10 3/4 C (Min) Nominal Wall Weight 9 .125 .072 .315 1.000 4.625 8.6 .500 5.900 2.com .9 1 2 3 4 6 12 19 36 75 / 16 11 16 23 32 7 8 29 32 15 16 31 32 3 32 11 64 3 8 9 16 / / / / / / 1 1 1 1 / / / / 90-10 Part Number 511386 481206 262482 129838 129854 481222 129896 129870 129919 129935 70-30 Part Number 470035 462422 462430 433245 481230 462448 472710 472702 481272 582060 Long Turn Tees.148 .563 6.134 .660 1.5%.148 . Nickel 30.083 .alaskancopper.083 . Nickel 10.0%.900 2.125 .083 .5%.660 1.563 6.095 .095 . 500 5.083 . Wall Weight 90-10 Part Number 70-30 Part Number 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 1.6%.1 cl.7 1 2 2 4 8 11 11 12 14 19 19 20 .072 .4%. Revision D Straight Lateral Reducing Lateral UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).0%.065 .180 .375 2.03 .1 .072 . Iron 0.125.NAVSEA 810-1385880.675 .540 . Specifications: pg.250 128882 111445 128866 111479 128905 128955 128997 129032 129074 129090 111398 129139 129171 129210 129236 129252 129278 129286 129309 433774 481484 437859 437867 481418 481434 402197 472833 128921 128971 129016 129058 111314 129113 470459 129155 129197 111330 243103 111364 273768 293653 473643 481450 481492 481468 481476 /32 /8 3 /4 13 /16 7 /8 1 1 1/4 1 5/16 1 9/16 1 21/32 1 3/4 1 13/16 2 1/16 2 7/32 2 5/8 3 3 1/4 3 3 3 3 3 3 5 T 90-10 Part Numbers .250 .187 .095 .000 4.alaskancopper.083 . Available in “regular” thickness (similar to Schedule 40s). ■ 24 Nominal Pipe Size OD C (Min) B D Class 200 Nom. Sizes not shown may be available upon request.500 4.250 .083 .3 .134 .563 6. Dimensions “B” and “D” per ANSI B16. ■ Nominal Chemicals 90-10: Copper 88.6 .840 1.165 . ■ ■ Nominal Pipe Size Inside (G) Diameter 1 .134 .900 2.095 . Nickel 30.00 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 3 Class 200 Class 50 W Weight T 90-10 Part Numbers 70-30 Part Numbers 17 .072 .02 .660 1. All weights are approximate.500 5.0 24.165 .5%.00 18.095 . ■ Nominal Chemicals 70-30: Copper 69.050 1.6%. 60.065 .250 .134 . Iron 1. Nickel 10.625 10. Nickel 10. 58.250 . Iron 0.0%.NAVSEA 810-1385880.900 2.04 . Nickel 30. 45˚ Laterals . Iron 1.5%. Nominal Chemicals 90-10: Copper 88.315 1.000 4.180 465894 465909 437184 456625 437192 437948 Dimensions are in inches.500 4. ■ Nominal Chemicals 70-30: Copper 69.4%.5%.250 .06 .156 .072 .065 .660 1.125 .75 14.0%.134 .625 8.75 9 16 11 16 23 32 7 8 29 32 15 16 31 32 3 32 11 64 3 8 9 16 11 16 1 3/4 2 2 1/2 2 1/2 3 3 3 3 1/2 3 1/2 4 1/2 5 5 1/2 6 1/4 7 8 9 1/2 10 11 1/2 12 13 1/2 14 1/2 17 1/2 20 1/2 24 1/2 .00 20.625 8.095 .065 .Copper-Nickel Butt Welding Fittings Class 200 Sleeves .125 .00 22.109 .625 10.187 . Revision D UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).109 .75 12.875 3.75 12.375 2.00 16.250 .0%. www.250 .5%.875 3.08 .250 2 2 4 5 7 9 12 19 26 47 93 165 435687 249400 129676 129692 129715 129731 129757 129773 129799 129812 481531 486743 481515 469301 469296 476308 470043 481523 468224 435108 473504 469319 486735 486751 / / / / / / / 1 1 1 1 1 / / / / / Dimensions are in inches.com .563 6. Tolerances: pg.2 .083 .5 .148 . ■ ■ Nominal Pipe Size OD 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24 1.875 3.900 2. Iron 1.156 .NAVSEA 810-1385880.4%. Nominal Chemicals 90-10: Copper 88.00 20.134 .660 1.6%. ■ Nominal Chemicals 70-30: Copper 69.072 .125 . Available in “regular” thickness (similar to Schedule 40s).180 .5%.2 .00 18.5%.375 2. Nickel 10.095 .180 . Revision D UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).315 1. Iron 0.109 .75 12.5 2 3 4. 25 www.065 .165 .5 7 14 27 28 37 47 49 51 129325 129414 129375 129430 129472 129511 249395 129537 129553 129595 129618 129634 129650 453465 477524 477451 477388 476293 129341 477566 129391 129456 129498 111534 477574 111550 129579 249387 249379 249361 477582 477401 477540 477508 477396 477427 .5 .500 4.250 .2 .134 .Copper Nickel Butt Welding Fittings Caps .0%.625 8.187 .75 14.250 .083 .148 .2 .00 16.250 .250 .625 10.165 .alaskancopper.180 10 17 19 24 33 35 37 463800 435823 460616 477710 477736 439267 431780 Sizes not shown may be available upon request.250 .com .00 C* (Min) 1 /2 /16 11 /16 23 /32 7 /8 29 /32 15 /16 31 /32 1 3/32 1 11/64 1 3/8 1 9/16 1 11/16 9 Class 200 F 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 2 2 1/2 2 1/2 3 3 1/2 4 5 6 Class 50 Nominal Wall Weight 90-10 Part Number 70-30 Part Number Nominal Wall Weight 90-10 Part Number .500 5.000 4.563 6.083 .8 1 1.0%.095 .250 .072 . Nickel 30.00 24. R.750 1 3 /2 1 /2 2 13/16 12 12. Available in “regular” thickness (similar to Schedule 40s). “ODD” refers to outside depth of dish.875 7 3 3. Inside crown radius (I.R. 26 www.bellmouth_type1 Copper Nickel Butt Welding Fittings ASME Flanged and Dished Heads Nominal Pipe Size OD ODD 2 2. however special SF lengths can be provided.500 1 1/16 1 /2 1 9/16 5 5.500 15 4 /16 SF W /2 1 5/16 1 /2 1 3/8 /16 1 /2 1 7/16 4.000 2 3/4 1 /2 3 1/4 16 16.) shall not exceed the outside diameter.750 2 5/8 1 /2 3 1/8 14 14. Dimensions are in inches.000 3 5/16 1 /2 3 13/16 20 20.) minimum = 6% of outside diameter or 3T whichever is greater.000 5 3 /8 1 /2 4 1/8 24 24.375 13 2 1/2 2. “SF”refers to straight flange length normally supplied.000 3 1 /2 3 1/2 18 18.563 1 3/16 1 /2 1 11/16 6 6.625 2 1/16 1 /2 2 9/16 10 10.000 6 /16 1 /2 6 13/16 /8 5 1 Inside knuckle radius (I. “W” refers to nominal height normally supplied.com .000 5 5/16 1 /2 5 13/16 36 36.C.000 4 1/4 1 /2 4 3/4 30 30.625 13 1 /16 1 /2 2 5/16 8 8.K.alaskancopper. Iron 1.6%.5%.0%. etc.0%. Iron 0. 810-1385792 ■ Bellmouths are available plain (for buttwelding) or flanged. Nominal Chemicals 90-10: Copper 88.4%. www.322 593396 593532 1 1/2 1 /2 1 4 1/2 4. Nickel 30. ■ Dimensions per BUSHIPS DWG.625 593451 273962 4 1 3/4 3 1/2 8 1/4 8. pleasespecify type of flange (BuShips.437 593493 593582 10 3 1/2 7 1/4 20 15.815 273904 593508 1 3 /8 3 /4 3 1/2 2.com . All weights are approximate.5%.148 593485 593574 8 3 6 1/4 16 13.625 593469 273938 5 2 4 9 1/2 9. Nickel 10.822 273881 593524 1 1/4 3 /8 3 /4 4 3.083 593401 593540 2 1/2 1 2 6 5.109 593427 593566 3 1/2 1 3/4 3 1/2 8 1/4 8.634 593477 456764 6 2 /2 5 12 11. ■ ■ Type 1 Type 2 Type 1 Nominal Pipe Size D B C 90-10 Part Number 70-30 Part Number 3 /8 3 /4 3 2.595 593419 593558 3 1 1/2 3 7 7.083 273899 439649 2 5 /8 1 /2 5 5.500 273873 593516 3 /4 L 1 1 Type 2 27 Nominal Pipe Size A C D 1 1/4 2 1/4 1 5/8 3 1 1/2 2 1/8 1 2 5 2 1/2 E 90-10 Part Number 70-30 Part Number /4 3 /16 593590 593710 3 /4 3 /16 593605 593728 3 /8 7 2 /8 3 /4 3 /16 593613 273946 4 1/8 3 1/8 3 /4 1 /4 593621 593744 3 6 1/4 6 3 /4 1 /4 593639 593752 3 1/2 6 1/4 5 1/8 3 /4 1 /4 593647 593760 4 8 1/8 7 5/8 3 /4 1 /4 593655 487804 5 12 5 / 8 14 1/8 3 /4 1 /4 593663 593778 6 13 / 8 14 /8 1 1 /4 593697 412540 8 20 1 / 4 22 7/8 1 1 /4 593702 593786 7 5 Dimensions are in inches.alaskancopper.). ■ Nominal Chemicals 70-30: Copper 69. If flanged is required. ANSI.Copper Nickel Bellmouth Fittings Bellmouths UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). ). pleasespecify type of flange (BuShips.6%.com . etc. ■ Nominal Chemicals 70-30: Copper 69.alaskancopper.4%. Nickel 30. 28 www.0%.5%. Nominal Chemicals 90-10: Copper 88. ■ ■ Type 3 Nominal Pipe Size A B E D 90-10 Part Number 70-30 Part Number 3 6 5/8 3 1/8 3 /4 6 5/8 3 1/2 6 1/2 3 1/2 593794 593859 3 /4 5 1/2 593809 4 8 3/4 593867 4 3 /4 8 3/4 593817 593875 15 5 3 5 6 /4 18 /2 593825 593883 15 5 / 8 6 1/8 1 17 3 / 8 593833 8 593891 23 7 / 8 8 1 29 5 / 8 593841 593906 1 Dimensions are in inches. ANSI. Iron 1. 810-1385792 ■ Bellmouths are available plain (for buttwelding) or flanged. ■ Dimensions per BUSHIPS DWG. Iron 0.0%. All weights are approximate.5%. If flanged is required. Nickel 10.Copper Nickel Bellmouth Fittings (continued) UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). 78 9.62 18.4%.59 10.88 3.065 .0%.25 2.187 .78 9. Dimension D is center to end of the fitting.065 .5%.91 2.500 5.25 2.875 3.62 18.94 3.50 4.17 13. 2 4 5 8 10 16.NAVSEA 802-5959353 App.7 1 1. 27 www.28 5. Nickel 30.94 1.660 1.56 1.083 . Iron 1.00 2.97 8.25 1.88 1.17 14.00 21.065 . ** Part numbers shown for sizes 1/4”. Iron 0.Copper-Nickel Belled End Fittings 90˚ Long Radius Elbows .12 2. ■ Nominal Chemicals 70-30: Copper 69. MSS also available.2 .000 4.500 4.625 10.17 6.375 2.94 2.6%. Dimensions are in inches.59 2.00 21. Sizes not shown may be available upon request.625 8.109 .3 .840 1. dimensions per Alaskan standards.41 6.095 .5 26.095 .315 1.56 19.900 2.5%. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).134 . *3 1/2” size is not included in NAVSEA or MSS.083 .072 .com .5 .065 .38 16.25 1.6 .0%.53 11. Nickel 10.62 5.88 3.18 6.17 13.75 12.00 2.94 2.69 2.98 7.41 6.72 4.56 19.94 3.62 5.28 5.540 .59 10.18 6.675 .94 1.98 7.250 NAVSEA MSS D E D E Weight NAVSEA/MSS 90-10 Part 70-30 Part Number Number 1.75 .53 11.50 4.69 .38 6.151 .38 2.38 6.5 36 68 120 479071** 479186** 479259 479348** 479398 479453 479526 469791 467456 469806 508448 467464 468240 468258 467228 467278 478986 479097** 479209** 479275 479364** 476691 479479 476706 470603 471722 470629 494487 471730 478790 476714 478821 467294 479005 Dimension E is center of fitting to end of adjoining pipe.563 6. ■ ■ Nominal Minimum Pipe Size OD Wall 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2* 4 5 6 8 10 12 3 .072 .125 .80 1.38 16.38 2.17 6.065 .12 2.050 1.17 14.alaskancopper.62 1.44 2.80 1.97 8.25 1.72 4. Nominal Chemicals 90-10: Copper 88.44 2. 3/8” and 3/4” are NAVSEA.B. 375 2.050 1.75 .563 6.065 .80 1.00 3.97 8.97 8.88 1.50 4.53 11. *3 1/2” size is not included in NAVSEA or MSS.72 4.94 3.072 .38 1.59 10.151 .94 2.5 116 D 2.41 6.38 .187 .17 13.28 1.69 MSS T (Tangent) .18 6.69 Weight .62 18.72 .59 2.91 .62 5.6 16.63 1.17 13.083 .78 9.125 .25 E 1.62 3.38 6.59 1.109 .00 2.98 7.62 .17 6.625 10.03 2.88 3.56 .250 D 1.94 1.28 5.94 2.095 .94 3.6 .75 12. Dimension T is the tangent length of the street end.4%.28 . Nominal Chemicals 90-10: Copper 88.072 .41 6.3 .53 11.17 14.6%.62 .75 .065 .94 .875 3.840 1.38 16. dimensions per Alaskan standards.50 4.134 .17 14.25 2.5%.88 .315 1.75 Minimum Wall .00 2.98 7.0%.2 .675 .25 2.80 1.28 1. Sizes not shown may be available upon request.5 27 35 65. 28 www.5%.38 2.91 2. ■ ■ Nominal Pipe Size 1 /4 3 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2* 4 5 6 8 10 12 NAVSEA OD .00 4.com .88 3.25 E 1.09 1.50 .56 1.660 1.28 5.500 5. Iron 0.500 4.00 21. Dimensions are in inches.38 16.25 1.38 6. Dimension D is center to end of the fitting.5 .7 1 1 2 4 5 8 9.25 MSS 90-10 Part Number 479144 479225 479291 479372 479411 479487 479550 474267 469898 469903 70-30 Part Number 479160 479233 479314 479380 479437 479500 479576 478847 478863 478871 90-10 Part Number 70-30 Part Number 494479 494453 494607 494445 469911 469929 469945 467236 474275 479021 478897 478910 478936 478952 478960 479039 494500 587086 Dimension E is center to end of fitting for street end and center of fitting to end of adjoining pipe for socket end.17 2.97 1.12 2. MSS SP-119 NAVSEA MSS UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). Nickel 30.38 2.17 1.94 1.56 19.67 1.065 .78 9.Copper-Nickel Belled End Fittings 90˚ Long Radius Street Elbows .44 2.B.900 2.62 5.0%.17 6. ■ Nominal Chemicals 70-30: Copper 69.065 .065 .44 .18 6. Nickel 10.095 .625 8.alaskancopper.78 2.44 2.083 .56 19.47 .69 .62 18.00 1.00 21.12 2.59 10.69 NAVSEA T (Tangent) .25 1.NAVSEA 802-5959353 App.62 1. Iron 1.540 .73 1.72 4. 76 3. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). *Part numbers shown for sizes 1/4”.92 1. 3/8” and 3/4” are NAVSEA.9 1 2 2 4 6 7 11 17 22 39 80 477778 477825 477875 477980 474259 478067 478106 476926 469814 469822 564509 469830 469848 469856 467252 467286 478677 477794 477841 477930 478017 478041 478083 478122 476730 478148 471756 512853 476748 476756 471764 478172 467309 478693 Dimension G is center of fitting to end of adjoining pipe.625 8.45 4.25 1.083 .91 6.53 3.6%.22 10.875 3. Nickel 10.072 .900 2.75 .151 .14 1.44 2.12 1.34 1.095 . 29 www.6 .24 1.065 .94 1. Sizes not shown may be available upon request.065 .4%.89 1. Nominal Chemicals 90-10: Copper 88. **3 1/2” size is not included in NAVSEA or MSS.563 6.62 1.59 9.540 .97 2.20 4.45 4.14 5.20 1.675 .109 .125 .70 0.250 1.14 5.50 1. Iron 0.0%.19 2. ■ Nominal Chemicals 70-30: Copper 69.com .06 1.NAVSEA 802-5959353 App.52 3. Iron 1.20 4. Dimension F is center to end of the fitting.97 2.19 3.065 .5%.17 3.06 0.4 .alaskancopper.Copper-Nickel Belled End Fittings 45˚ Long Radius Elbows .7 .75 12.660 1.B.53 3.315 1.050 1.02 1.500 5. MSS also available.92 0.78 9.095 .1 .065 .17 3.50 1.38 1.840 1.06 1.27 5.1 .78 2.19 2. ■ ■ Nominal Pipe Size 1 /4 3 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2** 4 5 6 8 10 12 NAVSEA MSS OD Minimum Wall F G F G Weight NAVSEA/MSS* 90-10 Part 70-30 Part Number Number .78 9.500 4.70 0.91 6.0%.96 4.91 7.134 .34 7.38 1.34 1.083 .24 1.22 10.44 2.065 .187 .12 1.625 10.14 .70 0.072 .96 4.59 9.62 1.19 3.000 4.38 1.375 2.27 5.78 2.52 3.91 7.5%.76 3. dimensions per Alaskan standards.34 7. Dimensions are in inches. Nickel 30. ■ ■ Nominal Pipe Size OD NAVSEA Minimum Wall F G T (Tangent) Weight MSS NAVSEA T 90-10 Part F G (Tangent) Number 70-30 Part Number 1 . dimensions per Alaskan standards.91 6.3 .14 5. Iron 1.73 1.065 .4%.065 .28 1.38 1. **3 1/2” size is not included in NAVSEA or MSS.52 3. MSS SP-119 NAVSEA MSS UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).20 4.25 MSS 90-10 Part Number 70-30 Part Number 494356 494623 494380 497273 494364 496984 Dimension G is center to end of fitting for street end and center of fitting to end of adjoining pipe for socket end.93 0.59 9. Dimension T is the tangent length of the street end.0%.70 478180 478203 478253 478295 478334 478384 478449 474283 469961 469995 478198 478229 478261 478318 478368 478415 478457 478473 478499 478520 471706 470001 470019 467260 470027 474291 478546 478562 478588 478601 478627 478643 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2* 4 5 6 8 10 12 3 .5 21 36.97 2.67 1.5%.25 1.25 1.75 12.38 0.78 9.62 0.78 2.14 5.70 0.50 0.27 5.095 .109 .75 1.69 1.50 1.2 .53 3.38 1.24 1.625 8.53 3.97 2.Copper-Nickel Belled End Fittings 45˚ Long Radius Street Elbows .38 1.7 1 1 2 4 5 8 10 16.12 1.072 .083 .89 1.92 1.187 .52 3.62 0.19 3. ■ Nominal Chemicals 70-30: Copper 69.28 0.6 .78 2.095 .02 1.675 .00 1. Nickel 10.70 0.134 .96 4.151 .563 6.97 1.06 0. Nominal Chemicals 90-10: Copper 88.34 7.375 2.44 2.17 3.78 2.14 .92 0.56 0.76 3.250 0.09 1.91 6.91 7.125 .91 7.19 2.065 .500 4.22 10.840 1.17 2.59 9.083 .B. 30 www.69 0.78 9.com .63 1.47 0.315 1.44 2.14 0.27 5.5 76 0.38 1.94 1. Iron 0.050 1.03 2. Dimension F is center to end of the fitting.75 0.24 1.660 1.0%.00 3.45 4.19 2.5 .500 5.62 1.34 1.34 7.20 1.50 1. Sizes not shown may be available upon request.62 1.875 3.96 4.540 .17 1.5 26. Dimensions are in inches.62 3.72 0.75 0.88 1.12 1.56 1.22 10.NAVSEA 802-5959353 App.76 3.06 1.88 0.065 .5%.6%.06 1. Nickel 30.alaskancopper.44 0.000 4.072 .625 10.20 4.900 2.91 0.34 1.19 3.065 .17 3.45 4. Nickel 10.Copper-Nickel Belled End Fittings Short Radius 90° Elbows .134 .180 .00 20.NAVSEA 802-5959353 App.165 . Nominal Chemicals 90-10: Copper 88.180 .165 .75 14.00 16.180 . Iron 1.00 30.00 18.5 1 1 2 2 3 6 11 19 36 66 80 105 131 162 196 233 276 363 521 NAVSEA/MSS 90-10 Part Number 70-30 Part Number Nominal Wall Weight 413732 132459 132996 132352 132417 132433 133031 133057 132271 132506 130318 130376 130431 435205 229688 477647 477655 467838 562010 477621 262343 130106 130130 438449 130172 243250 243268 132849 132776 284337 438457 437469 477639 433855 438465 477663 .187 .250 . Nickel 30.00 2 3/16 2 23/32 3 3/8 3 29/32 4 7/16 4 31/32 6 3/32 7 11/64 9 3/8 11 9/16 13 11/16 14 1/2 16 1/2 18 1/2 20 1/2 22 1/2 24 1/2 26 1/2 30 1/2 36 1/2 11 /16 /32 23 7 8 29 32 15 16 31 32 3 32 11 64 3 8 9 16 11 16 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 / / / / 1 1 1 1 1 / / / / / / / / / / / / / / MSS K Nominal Wall Weight 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 26 30 36 .B.250 . Iron 0.095 .625 10.0%.125 .500 5.250 .900 2.4%.250 .625 8.250 .148 .0%.250 .072 .00 22. **3 1/2” size is not included in NAVSEA or MSS.109 .00 26.75 12.5%.alaskancopper.083 .375 2.134 .com . ■ Nominal Chemicals 70-30: Copper 69.083 .156 .250 . MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).250 . dimensions per Alaskan standards. 31 www.6%.875 3.563 6.00 24. MSS also available.00 36. ■ ■ NAVSEA Nominal Pipe Size OD A (Min) C (Min) 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 22 24 26 30 36 1.180 26 41 55 70 95 135 150 176 90-10 Part Number 435784 435792 436772 435263 435344 439275 439283 *NAVSEA part number only.500 4.095 .000 4.250 .5%.250 . 19 12.119 .06 2. Iron 1.168 .06 5.50 5.44 4.75 4.50 1.62 .0%.660 1.69 1.62 3.315 1.81 2.17 1.104 .563 6.38 11.06 1.81 10.91 0. Dimension T is the tangent length of the street end.81 8.62 3.43 1.97 6.5%.19 2.75 1. Nickel 10.75 7. Sizes not shown may be available upon request. 32 www.Copper-Nickel Belled End Fittings Short Radius 90˚ Street Elbows NAVSEA MSS UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).12 1.50 5.50 14.69 0.090 .625 8.91 4.62 1.25 3.alaskancopper.5%.156 . ■ ■ NAVSEA Nominal Pipe Size OD Minimum Wall D E 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2* 4 5 6 8 10 12 .75 12.81 8.69 0.0%.104 .189 .88 0.81 2.56 0.50 14.00 2.06 13.500 5.com .56 3.56 2.62 MSS NAVSEA MSS N T (Tangent) Weight D E T 90-10 Part 70-30 Part 90-10 Part 70-30 Part (Tangent) Number Number Number Number 1.12 4.09 1.31 4.56 2.06 2.75 1.56 1.50 1.09 7. Nickel 30.72 3. ■ Nominal Chemicals 70-30: Copper 69.06 5.234 .19 12.75 2.38 3.090 .94 11.75 4.4%.19 2.06 13.50 0.900 2.81 5.06 0.375 2.136 .17 9.81 10. Nominal Chemicals 90-10: Copper 88.75 7. Dimensions are in inches.00 1.12 4.94 11. Iron 0.081 .72 0.81 6.62 6.625 10.00 4.81 1.62 6.97 1.56 13.93 0.7 1.50 1. 5 6 7 10 17 23 32 70 97 483559 483575 483583 483591 470069 470077 483606 483614 483622 483630 483486 483494 470085 474314 470093 470108 470116 483664 483509 483517 483525 483533 483541 483672 582272 494372 494461 589428 497744 587060 587078 Dimensions N and D are fitting center to end.80 5.56 3. *3 1/2” size is not included in NAVSEA or MSS.37 1.56 1.12 1.500 4. Dimension E is center of fitting to end of adjoining pipe.00 2.875 3.31 4.50 2.000 4. 5 2 3 3.25 3.81 2.00 4.119 .6%. dimensions per Alaskan standards.313 1.62 1.81 6.38 1. 69 0. Sizes not shown may be available upon request.187 .7 .5%.875 3.50 10.095 .44 1.625 10. Dimensions are in inches. Nickel 30.59 0.6%.38 0.88 2. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).065 .5 .625 8.050 1.900 2.09 1.94 2.0%. 33 www.06 8.134 .12 1.675 .4%. *3 1/2” size is not included in NAVSEA or MSS.109 .75 .500 5.88 5.62 2.1 .50 3.43 Weight NAVSEA/MSS 90-10 Part Number 70-30 Part Number .94 4.62 5.540 .125 .083 .315 1.Copper-Nickel Belled End Fittings Straight Tees .000 4.072 . ■ Nominal Chemicals 70-30: Copper 69.75 4. ■ ■ Nominal Minimum Pipe Size OD Wall M L 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2* 4 5 6 8 10 12 3 .94 1. dimensions per Alaskan standards.91 1.94 3.500 4.12 4.065 .2 .083 .065 . Nominal Chemicals 90-10: Copper 88.00 0.563 6.660 1.00 8.151 .25 2.31 3.9 2 2 4 4 7 8 11 18 36 67 135 481264 480276 481303 481337 481361 481400 480284 470124 470132 470158 568511 467472 470166 470174 467317 467325 481688 481280 481256 481329 481345 481387 481426 481442 481549 481573 481599 494495 470653 481620 481646 481662 467333 481701 Dimension M is center to end of the fitting.75 7.840 1.com .NAVSEA 802-5959353 App.B.50 1.00 3.0%.69 1.095 .375 2.38 3.75 12.25 1.alaskancopper.62 7.78 0. Iron 1.065 . Dimension L is center of fitting to end of adjoining pipe.4 . Nickel 10.25 2.5%.065 .250 0.072 . Iron 0. 00 10.875 x 2.75 x 12.250 1.00 3.06 2.62 3.com .00 9.5%.66 2.62 4.0%.94 1. Nominal Chemicals 90-10: Copper 88.095 .375 x 2.62 4.31 3.083 .875 5.375 3.500 x 2.625 12.38 3.563 x 3.25 4.44 5.500 x 3.75 x 10.375 x 1.625 x 4.75 .05 2.083 .50 7.00 3.625 10.315 2.083 .315 x 1.62 9.75 8.250 .563 x 2.00 7.187 .00 3.00 3.30 4.44 5.500 6.625 10.500 8.06 8.38 4.62 2.625 x 5. 5 6 9 9 9.00 2.75 x 12.75 x 10.90 2.13 4.375 3.625 x 6.625 x 8.13 3.90 3.125 .NAVSEA 802-5959353 App.50 2.50 3.00 3.125 .625 x 5.500 5.109 .095 .94 3.12 1.875 x 1.50 3.75 x 10.56 6.875 x 2.109 .083 .500 x 3.875 x 2.94 4.50 10. 34 www.134 . Nickel 30.151 .18 1.25 2.4 2 2 2 2 2 3 3 3 5.500 x 1.151 .88 5.500 6.90 2.625 x 6.75 x 8.500 6. 5 13.125 .63 3.88 4.88 5.6%.62 5.50 2. Sizes not shown may be available upon request.00 10.187 .315 x 1.62 4.134 .31 3.500 x 4.38 6.38 6.62 8.06 7.625 x 4.94 3.62 5.5 52 11 6 11 7 12 0 587191 587183 480292 470205 470302 470297 470213 470849 470263 470221 470310 474330 470239 480006 470271 470247 474322 470289 467391 467406 467414 470255 476007 480080 479796 480129 480030 Dimensions M and Q are center to end of fitting.88 4.134 .75 x 6.62 6.38 2.500 x 3.563 10.00 8.12 4.25 2.88 3.75 x 5.875 4.00 7. Iron 0.31 3.alaskancopper.50 2.25 3.06 7.38 4.32 2.38 3.563 x 4.75 x 6.500 x 3.12 5.187 .50 2.625 x 6.62 5.19 2.62 7.75 7.875 4.75 x 10.095 .563 x 5.50 3.43 1. 5 5.00 8.500 x 4.06 2.250 .625 12. Nickel 10.375 x 2.43 8.62 2.75 x 12.06 .Copper-Nickel Belled End Fittings Reducing Tees . Iron 1.62 7.625 x 3.94 2.75 3.500 x 2.500 x 2.62 6.75 7.62 1.625 12.5%.12 6.75 2.12 4. ■ Nominal Chemicals 70-30: Copper 69.375 4.563 8.625 x 8.50 8.563 x 5.500 5. ■ ■ NAVSEA/MSS Nominal Minimum 90-10 Part Pipe Size OD Wall M L Q P Weight Number 70-30 Part Number 1 x 1 x 3/4 2x2x1 2 x 2 x 1 1/2 2 1/2 x 2 1/2 x 1 1/4 2 1/2 x 2 1/2 x 1 1/2 2 1/2 x 2 1/2 x 2 3 x 3 x 1 1/2 3x3x 2 3 x 3 x 2 1/2 4x4x2 4 x 4 x 2 1/2 4x4x3 5 x 5 x 2 1/2 5x5x3 5x5x4 6x6x3 6x6x4 6x6x5 8x8x4 8x8x5 8x8x6 10 x 10 x 5 10 x 10 x 6 10 x 10 x 8 12 x 12 x 6 12 x 12 x 8 12 x 12 x 10 499974 480307 479592 479893 479885 479607 479869 479819 479615 479916 479932 479623 479974 479827 479631 479657 479851 479704 479720 479738 479754 479958 480103 479770 480153 480064 1.43 8.44 2.00 1.151 .4%.500 x 4.88 4.563 8.625 x 6.5 14 14 26 27 27 50 50.B.12 4.50 2.065 . Dimensions are in inches.875 x 2. Dimensions P and L are center of fitting to end of adjoining pipe.083 .62 7.50 8.625 x 8.563 x 5. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).82 2.75 5.75 5.875 x 1.0%.75 x 8.30 5.94 3.62 2.25 2.109 .375 x 1.80 4.500 x 2.50 1. 5 470572 483428 483436 483444 483460 480268 483452 483266 483274 483478 /2 x 1/2 x 3/4 /4 x 3/4 x 3/4 1 x 1 x 3/4 1 1/4 x 1 1/4 x 3/4 1 1/2 x 1 1/2 x 3/4 /4 1 1 1/4 1 1/2 2 3 Dimensions M and Q are center to end of fitting. Nickel 30.18 2. Iron 0.4%. ■ Nominal Chemicals 70-30: Copper 69.07 .com . The radius of curvature of the external contoured portion of the branch outlet measured in the plane containing the axes of the run and branch shall not be less than 0.5%.5 3.12 2.88 1. ■ Nominal Chemicals 70-30: Copper 69.5 . ■ ■ Nominal Pipe Size Body Nominal Pipe Size Minimum Wall L M P Weight 90-10 Part Number 70-30 Part Number 1 3 . The radius of curvature of the external contoured portion of the branch outlet measured in the plane containing the axes of the run and branch shall not be less than 0.065 .7 .38 .19 2.19 2. Nominal Chemicals 90-10: Copper 88.065 . Fitting minimum wall thickness corresponds with Body Nominal Pipe Size. Dimensions P and L are center of fitting to end of adjoining pipe or thermowell base.8 1 483787 483795 483800 483818 483826 483834 483842 483850 /2 x 3/4 x 1/2 /4 x 3/4 x 3/4 1 x 3/4 x 1 1 1/4 x 3/4 x 1 1/4 3 /4 1 1 1/4 1 1/2 Dimension M is center to end of fitting. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).065 .B.NAVSEA 802-5959353 App. Iron 0. Nominal Chemicals 90-10: Copper 88.88 2.4%.88 1.alaskancopper.05 times the outside diameter of the branch. Fitting minimum wall thickness corresponds with Body Nominal Pipe Size.0%.19 2.87 2.19 2.06 2. Iron 1.6%.88 1. Angle Thermowell Tees.065 .NAVSEA 802-5959353 App. Sizes not shown may be available upon request.072 .19 2. Sizes not shown may be available upon request.38 2.56 2.0 1.38 1.87 1.Copper-Nickel Belled End Fittings Straight Thermowell Tees. Nickel 30. Dimensions are in inches.5 2.82 1. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500). Dimensions P and L are center of fitting to end of adjoining pipe or thermowell base.065 .0%. There shall be sufficient tangent length in the midbody of each fitting to form the branch and not effect the midbody to run transition shape.5%.065 . Nickel 10. ■ ■ Nominal Pipe Size Body Nominal Pipe Size Minimum Wall L M P Q Weight 90-10 Part Number 70-30 Part Number 1 3 .072 1.B.06 2.0 3.8 1 1.0%.87 1.18 2.88 1. Dimensions are in inches.94 2.19 2.5 2.5 .44 2.05 times the outside diameter of the branch.5%. Nickel 10.6 .6%.072 2.5%. Iron 1.0%. 35 www. 840 x .66 x . *MSS SP-119 dimensions are .083 4.065 1.072 3.065 2.72 .66 x 1.072 3. Iron 0.90 1.315 .7 482749 482943 1 1/2 x 1 1/4 1.1 481777 482587 1 /2 x 3/8 .7 474526 482935 1 1/2 x 1 1. Iron 1.com .2 481824 482595 3 /4 x 1/4 1.540 .03* 1 495954 480632 2 1/2 x 2 2.083 3.19” longer.7 482731 482927 1 /2 x /4 1. Dimension S is end to end of the adjoining pipe.00 .315 x .05 x .91 .60 1.840 .84 2.083 3.3 482634 482812 1 x 3/8 1.05 .083 3.90 .90 .065 1.37 . **These sizes not included in NAVSEA/MSS.315 x .91 .072 3.840 x .75 1.84 2.15* 1 495962 480616 2 1/2 x 1 1/2 2.3 482642 482820 1 x 1/2 1.9 480551 474403 3 2 /2 x 1** 2.50 .97 .083 4.072 2.315 .315 .37 2.90 x .675 .9 482757 482969 1 1 3 2 x /4 2.072 3.375 .50 . 36 www.315 .6%.6 474518 482870 1 1/4 x 3/4 1.072 2. dimensions per Alaskan standards.alaskancopper.37 2.84 2.60 1.065 1.37 2.75 2.072 2.84 .6 482676 482854 1 1/4 x 3/8 1.00 .Copper-Nickel Belled End Fittings Concentric Reducers .083 4.540 .90 1.6 482692 482888 1 1 1 1 1 /4 x 1 1.540 .375 x 1.27 .90 x 1.NAVSEA 802-5959353 App.375 x .072 3.90 1. Dimensions are in inches.75 2.22 . ■ ■ NAVSEA/MSS Nominal Pipe Size OD Minimum Wall R S Weight 90-10 Part Number 70-30 Part Number 3 /8 x 1/4 .9 482765 482985 2x1 2.27 .375 x 1.840 .50 .315 x 1. Sizes not shown may be available upon request.5%. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).840 . Nickel 30.66 x .75 2.540 .66 x 1.0%.90 x .84 2.5%.90 x 1.675 .875 x 1.875 x 1.34* 3.1 481735 481743 1 /2 x /4 .00 .91 .90 x .0%.60 1.6 482684 482862 1 1/4 x 1/2 1.75 2.05 .2 482626 482804 1 x /4 1.3 482668 482846 1 /4 x /4 1.44 .2 482618 482799 3 /4 x 1/2 1.875 x 2.065 2.540 .37 2.05 x .540 .90 .083 3.37 2.065 2.34* 3.00 .91 .84 1. Nominal Chemicals 90-10: Copper 88.675 .05 .6 482707 482896 1 1/2 x 1/4 1.375 x 1.84 2.840 .4%.34* 3.072 3.66 .15* 1 501412 2 1/2 x 1 1/4 2.03* 1 494681 480640 1 Dimension R is end to end of fitting.B.97 .840 .083 4.083 3.375 x 1.072 2.27 .50 .66 x .875 x 1.37 2.315 x . ■ Nominal Chemicals 70-30: Copper 69.7 474534 482951 2 x 1/2 2.94 .90 1.27 .90 x 1.60 1.34* 3.675 .7 482715 482901 1 1/2 x 3/8 1.675 x .9 482773 482993 2 x 1 1/4 2.065 1.7 482723 482919 1 1/2 x 1/2 1. All other sizes are dual certified.065 2.05 .66 .675 .065 1.3 482650 482838 1 x 3/4 1.072 2.065 1.27 .2 482600 482781 3 /4 x 3/8 1.66 . Nickel 10.90 1.05 x .9 474380 483004 2 x 1 1/2 2. 32 4.25 3.095 4.625 x 6.625 x 2.32 4.125 6. MSS SP-119 (continued) Nominal Minimum Pipe Size OD Wall R S Weight 3 x 1** 3.50 x 3.134 6.87 7.625 .148 7.87 3 470734 480690 4 x 2 /2 4.563 .375 .69 3 467498 480713 4x3 4.125 6.625 x 3.38 23 481052 481078 10 x 6 10.12 8 491154 6x3 6.375 .625 .75 x 8.06 25 474398 481125 12 x 6 12.25 3.59 2 512691 4x2 4.45 5.625 .875 .00 .90 .50 .625 .625 x 4.50 .134 6.134 6.315 .148 7.75 6.25 3.109 5.66 6 574384 1 5x4 5.Copper-Nickel Belled End Fittings Concentric Reducers .250 9.87 38 481214 481248 Dimension R is end to end of fitting.26 12 470815 481010 8x6 8. Sizes not shown may be available upon request.25 3.50 x 1.45 5.32 4.625 x 4.87 7.63 6 480755 480771 5x3 5.alaskancopper. *These sizes are not included in NAVSEA/MSS.32 4.109 5.66 3 512683 5 x 2 1/2 5.25 3.250 9.095 5.com .78 2 584729 1 3 1/2 x 2* 4.80 5.72 3.095 4.02 8 491162 480828 480852 6x4 6.125 6.625 .109 5.095 4.563 x 4.00 x 1.22 2 470726 480682 3 1/2 x 1 1/2* 4.50 .25 3.095 4.66 .50 x 1.75 x 6.875 .095 5.187 8.75 x 6. Dimensions are in inches. All other sizes are dual certified.45 5.B.50 x 2.095 5.40 2 501420 3 x 1 1/2 3.75 x 10.625 x 5.72 3. 37 www.563 x 4.50 .75 x 5.99 8 470792 480886 6x5 6.NAVSEA 802-5959353 App. dimensions per Alaskan standards.50 x 2.375 .59 2 584737 3 1/2 x 3* 4.05 8 470776 6 x 3 1/2* 6.00 x 2.80 5.75 .50 x 1.75 6.563 .095 4.875 .109 5.50 .63 6 470750 480797 5 x 3 1/2* 5.78 2 512706 3 1/2 x 2 1/2* 4.00 .31 34 481133 481159 12 x 8 12.095 5.72 3.563 .50 x 2.87 6.80 4.134 6.20 12 470823 481036 10 x 5 10.125 6.39 12 480983 481002 8x5 8.148 7.50 .625 x 5.25 3.250 9.625 x 4.00 x 2.50 .69 3 470742 480739 4 x 3 1/2* 4.563 x 3.50 x 4.40 NAVSEA/MSS 90-10 Part Number 70-30 Part Number 2 3 x 1 /4** 3.875 .134 6.75 6.57 6 470768 6 x 2 1/2* 6.06 36 481183 481191 12 x 10 12.40 2 470718 480666 3 x 2 1/2 3.187 8. Dimension S is end to end of the adjoining pipe.00 x 3.00 .80 4.50 x 2.25 3.563 x 2.875 .86 8 470807 480933 8x4 8.72 3.32 24 481094 481117 10 x 8 10.72 3.90 .40 2 470700 471798 3x2 3.80 5.187 8.75 x 8. 4 3.22 2.94 2.0%.5 482090 482383 494615 591679 1 1/2 x 1 1/4 1.072 .43 . MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).1 470344 481882 564088 591865 2 1/2 x 1 1/2 2.8 482113 482406 587492 591700 2 x 3/4 2.90 1.072 .88 .5 2.88 3.12 471714 482197 591289 591297 1 /2 x 1/4 .7 3.94 2.05 .50 .25 482008 482286 564004 591491 1 1/4 x 1/4 1.675 .49 .072 .94 2.90 1.96 .88 3.28 .75 2.14 481840 482236 591394 591409 3 /4 x 1/2 1.97 1.05 .22 2.15 1.083 .072 .315 .1 467480 474500 502426 508278 2 1/2 x 2 2.56 2.59 1.40 .09 1.072 .675 x .84 3.875 x 1.91 3.56 .14 481858 482244 563993 591425 1 x /4 1.4 3.7 3.12 1.083 .44 3.94 2.56 2. Nickel 30.43 .083 .72 3.90 .34 .91 3.58 .84 3.675 .840 .47 .35 482058 482325 591556 497728 1 1/4 x 1 1.66 .52 .31 1.44 3. Dimension T is the tangent length of the street end.315 x .72 3.4 3.05 .3 2.8 470328 482422 564062 591815 2 x 1 1/4 2.22 2.0%.28 1.50 .84 3.62 .5 2.375 .375 x .53 3.72 3.05 x .13 1.56 2.375 x 1. Dimension S is end of fitting to end of adjoining pipe.84 3. Sizes not shown may be available upon request.065 .840 x .00 .50 .540 .B.35 482066 482333 564012 591564 1 /2 x /4 1.88 3.540 .69 2.37 3.47 1.66 x 1.875 x 1.5 470564 482341 591611 591629 1 1/2 x 3/8 1.083 .37 .083 .28 .35 482032 482309 591522 591530 1 1/4 x 1/2 1.60 2.840 .315 .69 2.8 482121 482414 564054 591718 1 2x1 2.065 .5 482082 482375 564038 591661 3 1 1 1 3 1 1 /2 x 1 1.5%.75 2. Iron 0.083 .7 3.53 4.7 3.072 .91 3.375 x 1.28 1.675 .375 x 1.072 .28 .66 x .62 .90 x .97 1.37 3.44 3.96 .4 3.90 .315 x .90 x 1.62 .13 480331 482210 591336 591344 3 /4 x 1/4 1.90 1.3 2.47 1.14 481832 482228 591360 591378 3 /4 x 3/8 1.90 x 1.81 1.4%.47 1.8 476934 482430 564070 591823 2 x 1 1/2 2.072 .065 .5%.25 481989 482278 591475 591483 1 x 3/4 1.alaskancopper.875 x 2.72 3.3 2.com .28 .44 .11 1. Nickel 10.315 x 1.69 2.13 470556 482202 591310 591328 1 /2 x /8 . Dimensions are in inches.072 .840 .44 1.35 482016 482294 591506 591514 1 /4 x /8 1.675 .44 1.75 1.35 482040 482317 587418 591548 1 1/4 x 3/4 1.72 3.06 .083 .58 .56 2.38 1.44 2.05 .31 2.28 1.75 1.69 2.62 .43 .13 1.22 2.13 1.7 3.28 1.94 2.840 x .05 . *These sizes not included in NAVSEA/MSS.083 .1 470352 481890 494796 507094 1 1 Dimension R is end to end of fitting.60 2.6%.12 .56 2.840 .00 .81 1.00 .66 x .12 .05 x .065 .66 .88 3.58 .37 3.875 x 1.072 .083 .95 4.90 x .52 .8 470336 481874 561771 508286 2 1/2 x 1* 2.05 .315 .5 2.31 2.840 .58 .065 .94 2.5 482105 482391 564046 591687 2 x 1/2 2. ■ Nominal Chemicals 70-30: Copper 69.Copper-Nickel Belled End Fittings Concentric Street Reducers .95 4.60 2.75 2.00 .75 2.94 .46 .065 .53 3.66 x .84 3.5 2.315 . Nominal Chemicals 90-10: Copper 88.95 4.065 .25 481971 482260 591459 591467 1 x 1/2 1.NAVSEA 802-5959353 App. Dimensions for all other sizes qualify for both NAVSEA/MSS.90 1.28 .3 2.3 2.52 .84 1.58 . Iron 1.50 .69 2.065 .28 .34 .44 3.540 .00 .75 2.1 584672 591849 591857 505995 2 /2 x 1 /4 2.66 .66 x 1.37 2. dimensions per Alaskan standards.37 3.93 .60 2. 38 www.53 4.05 .065 .90 x .540 .37 3.81 1.96 .90 1.25 481866 482252 591433 591441 1 x 3/8 1.675 .315 x .90 x 1.065 .375 x 1.4 3.540 .540 .5 482074 482359 591637 591645 1 1/2 x 1/2 1.43 . ■ ■ NAVSEA MSS SP-119 Nom inal Minimum T Pipe Size OD Wall Tangent R S Weight R S NAVSEA MSS SP-119 90-10 Part 70-30 Part 90-10 Part 70-30 Part Weight Number Number Number Number 3 /8 x 1/4 .69 2.05 x .4 3.44 .91 3.05 .072 .5 474495 482367 564020 591653 1 1/2 x 3/4 1.96 .31 2.00 .31 2.95 4.12 1. 00 x 2.32 5. *These sizes not included in NAVSEA/MSS.com .3 5.375 .50 2.75 7.8 4.625 x 5.66 4.5 470425 482472 592277 560385 5 x 3 1/2* 5.25 4.00 x 1.12 3.625 x 4.095 .03 2 5.98 7.563 .B.25 4.75 x 8.72 3.563 .90 .32 5.17 6.25 4.151 1.45 12 470506 471780 592502 496918 8x7 8.095 .109 .50 31 9.80 6.625 .56 7.38 6.93 4.88 17 8. Dimension T is the tangent length of the street end.80 5.3 583919 592099 585424 592104 3 1/2 x 2 1/2* 4.72 4.69 8.16 2 470378 471772 494429 497736 3 x 2 1/2 3.91 5 6.095 .16 2 470360 474372 578427 592049 3x2 3.17 6.50 x 3.87 8.25 4.75 x 5.64 12 7.563 x 4.72 4.625 x 4.01 7.75 x 6.095 .5 482139 482464 592251 592269 5x3 5.16 5.64 5. Dimensions are in inches.64 5. MSS SP-119 (continued) NAVSEA MSS SP-119 Nom inal Minimum T Pipe Size OD Wall Tangent R S Weight R S NAVSEA MSS SP-119 90-10 Part 70-30 Part 90-10 Part 70-30 Part Weight Number Number Number Number 3 x 1* 2 3.625 .8 4.09 5.00 x 3.095 .50 .125 1.5 584680 592293 592285 592308 5x4 5.8 4.66 4.7 470394 481913 592219 494398 4 x 2 1/2 4.45 6.187 1.66 4.59 4.97 2 470386 481905 494411 497281 1 3 /2 x 1 /2* 4.75 x 6.56 1.134 1.81 6.875 .75 x 10.6 470441 482503 551938 592340 6 x 3 1/2* 6.625 .6 470467 482511 551946 592390 6x5 6.69 8.625 .75 x 8.91 4.563 .05 7.97 4.12 3.50 x 1.7 470409 482448 492516 495970 4x3 4.72 4.93 4.81 6.84 2.3 5.51 12 470491 482545 592489 592497 8x6 8.94 7.50 x 1.50 x 2.32 5.095 .87 8.17 6.37 7 6.69 2.56 1.16 5. Sizes not shown may be available upon request.50 x 4.75 19 482155 482561 592560 592578 10 x 8 10.97 4.66 4.8 4.134 1.50 x 2.75 .134 1.91 4.50 5.8 4.375 .625 x 6.32 5.68 1.81 18 8.84 5 6.91 4.69 8.87 5 6.50 .59 3.45 6.80 6.563 x 4.93 4. dimensions per Alaskan standards.50 .875 .59 4.151 1.50 x 2.64 11 7.Copper-Nickel Belled End Fittings Concentric Street Reducers .625 x 5.28 2 568870 592023 592015 592031 3 x 1 1/2 3.625 .151 1.38 6.75 7.56 18 8.25 4.87 30 482163 482579 592594 592609 12 x 8 12.41 7 6.45 6.63 12 470483 482537 592463 592471 8x5 8.148 1.22 7 6.250 1.41 7 6.91 4.625 x 4.70 1.97 4.16 5.84 2 5.03 2.38 6.80 2.625 x 7. Dimension S is end of fitting to end of pipe.50 2.alaskancopper.91 4.38 1.3 5.57 2.3 5.64 5.3 585440 592154 592188 592170 3 1/2 x 3* 4.75 7.81 6.43 32 482189 483410 592633 592641 Dimension R is end to end of fitting.34 581064 591996 591988 592007 3 x 1 /4* 3.81 18 482147 482553 592544 592552 10 x 6 10.109 .09 5.69 30 9.50 19 474348 483397 592586 495425 12 x 6 12.125 1.5 470433 482480 592316 560377 6 x 2 1/2* 6.34 7 6.91 5 6.62 31 482171 483402 592617 592625 12 x 10 12.80 5.12 3.109 .59 3.3 585466 592057 592065 592073 3 1/2 x 2* 4.50 x 1.625 x 3.625 .45 6.125 1.70 11 7.6 592358 592374 592366 592382 6x4 6.53 5.50 x 2.80 6.625 x 2.16 5.125 1.93 4.7 470417 482456 494403 560416 4 x 3 1/2* 4.250 1.69 2.095 .87 8.33 13 568707 592528 592510 592536 10 x 5 10.50 2.6 470475 482529 592455 560806 8x4 8. 39 www.315 .563 x 2.56 7.50 .97 4.NAVSEA 802-5959353 App.09 5.50 2.17 6.12 3.250 1.187 1.095 .875 .875 .84 2.187 1.25 4.94 29 9.563 x 3.56 7.00 .38 6.7 581072 592235 592227 592243 5 x 2 1/2 5.095 .94 7.59 3.00 .59 3.134 1.57 5.69 2.25 4.00 .90 .875 .50 .3 583901 592196 586226 592201 1 1 4x2 4.375 .6 549216 592332 592324 578833 6x3 6.72 4.50 .86 7.09 5.00 x 2.64 5.94 7.109 .03 2 5.84 2 5.25 4.57 5.66 .05 7.16 5.83 11 7. Dimensions for all other sizes qualify for both NAVSEA/MSS.12 3.50 .59 4.59 3.134 1.17 6. 072 3.540 .90 1.675 .15 1 484123 484628 2 1/2 x 1 1/2 2.66 .375 .34 3.66 x 1.375 x .3 483957 484458 1 /4 x /4 1.065 1. ■ Nominal Chemicals 70-30: Copper 69.90 . **MSS part number.315 .05 x .Copper-Nickel Belled End Fittings Eccentric Reducers .065 2.27 .2 483868 484393 3 /4 x 3/8 1.6 483965 484466 1 1/4 x 3/8 1.540 .065 1.083 3.03 1 484149** 484644 1 3 3 1 1 Dimension R is end to end of fitting.90 x 1.065 2.00 .6%. ■ ■ NAVSEA/MSS Nominal Pipe Size OD Minimum Wall R S Weight 90-10 Part Number 70-30 Part Number 3 /8 x 1/4 .3 483949 484440 1 x 3/4 1.072 3. Iron 1.84 2.7 484050 484555 1 1/2 x 1 1/4 1.1 483876 484377 1 /2 x 3/8 .2 483907 484408 3 /4 x 1/2 1.7 484042 484547 1 1/2 x 1 1.90 x .083 3.065 2.840 x .05 .675 .84 2.75 2.90 .27 .60 1.3 483931 484432 1 x 1/2 1.44 .05 .083 4.05 x .97 .50 .072 2.com .065 1.34 3.083 4.5%.315 x .072 2.315 . Iron 0.540 .91 . MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).50 .84 .03 1 484131 484636 2 1/2 x 2 2.540 .9 484107 484602 2 x 1 1/2 2. Also available as Street Reducers.675 .840 .00 .375 x 1.375 x 1.675 .375 x 1.19” longer on MSS.50 .1 483884 484369 1 /2 x /4 .072 3.66 x .4%.5%.72 .90 x .9 484092 484597 2 x 1 1/4 2. *2 1/2” reducers are .37 2.84 1.90 1.66 x .60 1.540 .065 1.66 .66 .97 .84 2.875 x 1.90 x 1.875 x 1.05 .0%.083 4.75 2.60 1.065 1.6 483973 484474 1 1/4 x 1/2 1.27 .37 2.840 .065 2.7 484068 484563 2 x 1/2 2.2 483892 484385 3 /4 x 1/4 1. Nickel 10.91 .9 484076 484571 2 x /4 2. Dimension S is end to end of the adjoining pipe.072 3.90 1.375 x 1.27 .083 3.0%.315 x .083 3.84 2.66 x .540 .7 484018 484513 1 1/2 x 3/8 1.2 483915 484416 1 x /4 1.083 3.065 1.315 x .75 2.90 x .315 .7 484026 484521 1 1/2 x 1/2 1.90 .NAVSEA 802-5959353 App.072 3.05 x .50 .840 .05 .alaskancopper.00 .072 3.37 .072 2. Sizes not shown may be available upon request.9 484115 484610 2 /2 x 1 /4 2.00 .840 .37 2. Nickel 30.84 2.90 x 1.37 2.6 484000 484505 1 1/2 x 1/4 1.37 2.91 .75 1.75 2.072 2.675 .3 483923 484424 1 x 3/8 1. Nominal Chemicals 90-10: Copper 88.072 2.B.37 2.9 484084 484589 2x1 2.840 .90 1.90 1. 40 www. Dimensions are in inches.91 .27 .875 x 2.60 1.22 .94 .7 484034 484539 1 1 1 1 1 1 /2 x /4 1.34 3.675 x .6 483981 484482 1 1/4 x 3/4 1.840 x .315 x 1.66 x 1.6 483999 484490 1 /4 x 1 1. alaskancopper.625 .095 4.com .25 3.80 5.375 .NAVSEA 802-5959353 App.31 34 484335 484830 12 x 8 12.095 4.151 7.109 5.20 12 484296 484791 10 x 5 10.45 5.87 7.50 x 3.625 x 5.87 7.75 x 6.187 8.57 6 484238 484733 6x3 6.38 23 484301 484806 10 x 6 10.875 .50 x 2.187 8.625 .32 4.109 5.32 4.80 4.134 6.25 3.563 x 2.63 6 484220 484725 5x4 5.625 .563 .B.250 9.25 3.625 .63 6 484212 484717 5x3 5.187 8.125 6.50 x 2.50 .87 3 484181 484686 4 x 2 /2 4. Dimensions are in inches.563 .50 .32 4.134 6.87 6.75 x 8.563 .75 x 5.45 5.151 7.39 12 484270 484775 8x5 8.563 x 3.250 9. Sizes not shown may be available upon request.72 3.625 x 4.250 9.45 5.75 6.26 12 484288 484783 8x6 8.109 5.125 6.22 2 484173 484678 4x2 4.625 x 3.625 .99 8 484254 484759 6x5 6.06 36 484343 484848 12 x 10 12.75 x 10.75 x 6.50 x 2.75 .05 8 484246 484741 6x4 6.75 6.40 2 484157 484652 3x2 3.095 4.19” longer on MSS.50 . 41 www. **MSS part number. Also available as Street Reducers.50 x 1.625 x 6.134 6.875 .69 3 484204 484709 5 x 2 1/2 5.50 .90 .75 6.40 2 484165 484660 3 x 2 1/2 3.151 7.72 3. *2 1/2” reducers are .86 8 484262 484767 8x4 8.625 x 4.563 x 4.69 3 484199 484694 4x3 4.06 25 484327 484822 12 x 6 12.75 x 8.72 3.50 x 2.875 . MSS SP-119 (continued) NAVSEA/MSS Nominal Pipe Size OD Minimum Wall R* S* Weight 90-10 Part Number 70-30 Part Number 3 x 1 1/2 3. Dimension S is end to end of the adjoining pipe.50 .32 24 484319 484814 10 x 8 10.375 .80 4.87 38 484351 484856 1 Dimension R is end to end of fitting.Copper-Nickel Belled End Fittings Eccentric Reducers .625 x 5.125 6.50 . 95 1 2 3 5 9 19 32 483046 483054 483062 483070 483088 483096 480315 483101 480323 477338 496887 474356 483119 470580 467341 470598 483127 483135 483143 483151 483169 483177 483185 483020 470661 483038 483193 483208 483216 483224 483232 483240 483258 Dimension F is the end to end of the fitting.00 4.44 1.7 .0%.B.35 .095 .4%.75 12.50 4.6 .6 .90 2.072 .39 3.065 .875 3. Iron 0.151 .50 5.625 8.563 6.44 1.050 1. Sizes not shown may be available upon request.41 2.NAVSEA 802-5959353 App.93 .109 .540 . Nickel 30. Nominal Chemicals 90-10: Copper 88.083 .4 .065 .91 3.85 1. 42 www.187 .065 .3 .44 1.Copper-Nickel Belled End Fittings Caps.com .alaskancopper.66 1.5%. *3 1/2 size is not included in NAVSEA/MSS.6%.90 2. Dimensions are in inches.41 2.75 .095 .125 .3 .19 1. Nickel 10.44 1.065 .5%.19 1. dimensions per Alaskan standards. ■ ■ NAVSEA/MSS Nominal Pipe Size 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2* 4 5 6 8 10 12 3 OD Minimum Wall Cap F Weight 90-10 Part Number 70-30 Part Number .94 5.250 0. Iron 1.072 .4 .375 2.625 10.315 1.00 1.94 4. ■ Nominal Chemicals 70-30: Copper 69.5 .065 .0%.44 1. MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).675 .840 1.083 .134 . 41 1.16 5 561713 502248 10 10.93 1.12 .36 .55 469741 501739 70-30 Part Number 3 3.87 .09 .70 . 61.03 2 .com .07 .88 .03 3 /8 .66 2.3 578809 2 1/2 2.5%.15 587028 1 1/4 1.24 .74 .10 1 501747 4 4.15 2. Iron 1.10 .27 16 501802 502264 Dimensions are in inches.1 585628 1 1.5%. Nickel 30.alaskancopper.08 .07 .0%. 43 www.88 .07 .7 3 1/2* 4.53 1.MSS SP-119 Dimensions per MSS SP-119 UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).04 565547 1 /2 .08 .69 1.74 .88 .88 .36 . dimensions per Alaskan standards. Nickel 10.59 2. Iron 0.3 469725 2 2.57 . *3 1/2 size is not included in NAVSEA/MSS.09 . 58. Closure couplings to MSS SP-119 available on request.66 2.53 1.79 3.35 1.12 .0 .36 .4%. Nominal Chemicals 90-10: Copper 88.74 .88 .0%.12 .14 2 578841 502222 6 6.6%.Copper-Nickel Belled End Fittings Couplings . Tolerances: pg.09 469686 3 /4 1.20 11 501797 502256 12 12.91 1.79 3.2 587036 1 1/2 1.5 561810 580343 8 8.07 .08 . ■ Nominal Chemicals 70-30: Copper 69.12 1 558590 496683 5 5. ■ ■ Nominal Pipe Size Inside Diameter G (Min) W Minimum Thickness T Weight 90-10 Part Number 1 /4 .07 . Specifications: pg. 065 .250 . Sizes and lengths not shown are available upon request.148 .9 (short pattern).187 .com .6 .7 1 2 2 3 4 7 14 26 Length M Lap Diameter G Type C 90-10 Part Number 2 2 2 2 2 2 1/2 2 1/2 2 1/2 3 3 3 3 1/2 4 5 6 6 6 6 6 6 6 1 3/8 1 11/16 2 2 1/2 2 7/8 3 5/8 4 1/8 5 5 1/2 6 3/16 7 5/16 8 1/2 10 5/8 12 3/4 15 16 1/4 18 1/2 21 23 25 1/4 27 1/4 416471 415093 267115 267123 267131 266648 267149 267157 415085 267165 406719 414487 433863 434209 497752 435182 562272 Specifications: pg.095 .072 .2 .31 1.4 . Dimension M per MSS SP-43 and ASME B16.alaskancopper.250 .840 1.250 . Tolerances: pg. Bosses Straight Piping Outlet NAVSEA Outlet DWG 810-1385912 Lateral Outlet Elbow Outlet ■■■■ 44 www.083 .065 .66 1. 60.Copper-Nickel Stub Ends & Bosses Lap-Joint Stub Ends Type A Nominal Pipe Size /2 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 1 3 OD Class 200 Nominal Wall . 58.095 .072 .125 .134 .250 .109 .250 .2 .250 Type C Weight .065 .1 .05 1.3 .90 2 3/8 2 7/8 3 1/2 4 4 1/2 5 9/16 6 5/8 8 5/8 10 3/4 12 3/4 14 16 18 20 22 24 .083 .250 . 250. Backing flanges are usually steel.alaskancopper.5 Composite ANSI B16.5 These special flanges offer an economical alternative to the solid copper-nickel flanges listed above and are normally available in sizes 2“ nominal and larger. socket welding. specifications and alloys. Classes 150.Copper-Nickel Flanges Solid Copper-Nickel Flanges. ■ 45 www.com . & 300 NAVSEA 810-1385992 Weld Neck ANSI B16. 250 and 300 Overlay ANSI B16. or blind. ■ Flanges may be ordered manufactured from material conforming to the requirements of MIL-C-15726F.5 Blind ANSI B16. ASTM B 151 or B 171. or a grooved socket for use with a pre-inserted silver-brazing ring.5 90-10 and 70-30 copper nickel flanges are available in sizes 1/2“ nominal and larger. ■ Flanges can be supplied as slip-on. ■ Special Copper-Nickel Flanges. ■ Composite flange sets are generally used instead of weld neck flanges when butt welding to a pipe or fitting is necessary but a loose backing flange is desired for ease of installation.5 Slip-On ANSI B16.5 Socket Welding ANSI B16. Classes 150. ■ Alaskan also stocks a complete line of MSS and ANSI style stainless steel flanges and can manufacture flanges to special dimensions. Normally supplied flat face. threaded. ■ Silver-brazing flange ends comply dimensionally with MIL-F-1183 and can be finished as a face fed socket without a groove. ■ Clad blind flanges utilize a forged steel blind flange which is clad with copper-nickel material on the wetted surfaces. ■ Overlay slip-on flanges utilize a forged steel slip-on flange which is weld overlayed with copper-nickel material on the gasket and wetted surfaces. Rings are ordered and supplied separately.5 Clad ANSI B16. weld neck. ■ Alloys 90-10 (UNS C70600) and 70-30 (UNS C71500). 875 24 590738 590843 5 11 1.alaskancopper.720 8 7 /8 9.938 3.57 8 7 /8 7.625 1.75 2 581145 581250 1 4.125 .75 6 581187 581373 2 1/2 7.813 1.25 29 590746 590851 6 12.00 .5 7 590704 590801 2 6. 46 www.880 4 5 /8 2.00 .00 .5 20 581234 581420 Bolt Circle Weight 90-10 Part Number 70-30 Part Number Socket Weld Commercial Flange.688 1.25 .5 1.95 4 7 /8 4.625 .875 4 581179 581365 2 6.700 4 5 /8 3.72 12 7 /8 10.75 1.66 8 7 /8 9. ■ Raised faces are available.25 4.5 3 590681 590788 1 1/4 5.090 4 5 /8 2.25 1. Flanges normally supplied with bore for Class 200 pipe per MIL-T-16420.0 .25 .570 8 3 /4 7.5.625 1.00 .563 1. Flanges normally supplied with bore for Class 200 pipe per MIL-T-16420.0 6.50 . ■ ■ Nominal Pipe Size A D F Number of Holes Hole Diameter 1 /2 3.500 1.5 1 2.570 4 3 /4 6. ■ Raised faces are available.875 10 404000 590827 3 8.688 1.88 4 5 /8 2. Class 150 Dimensions per ANSI B16.355 4 5 /8 3.938 4.875 5 590699 590796 1 1/2 6.5.875 2.09 4 3 /4 3.0 11 581200 581399 4 9.625 13 590720 590835 4 10 1.940 4 3 /4 5.5 581218 581404 5 10.563 .660 8 7 /8 8.125 3.94 8 7 /8 5.875 2.com .625 .36 4 3 /4 3.5 17 581226 581412 6 11.875 . Class 300 Dimensions per ANSI B16.50 3 581161 581357 1 1/2 5.438 6.44 8 3 /4 5 7 590712 590819 2 1/2 7.875 .5 14.Copper-Nickel Flanges Socket Weld Commercial Flange. ■ ■ Nominal Pipe Size A D F Number of Holes Hole Diameter Bolt Circle Weight 90-10 Part Number 70-30 Part Number 1 /2 3.750 2.50 9 581195 581381 3 7.625 36 590754 590869 Sizes not shown available upon request.375 1 580945 581242 3 /4 3.25 3 590673 590770 1 4.625 2 495912 590762 3 /4 3.50 .75 .440 4 3 /4 4.438 .938 5.125 2 581153 581349 1 1/4 4.0 1.950 4 3 /4 3.375 5.70 4 3 /4 3.5 .57 8 7 /8 6. 438 1.063 1.Copper-Nickel Flanges Socket Weld Navy Flange.000 4 581470 3 6.125 2 581446 581535 /16 3. Nominal Pipe Size 2 A 5. 250 Pound Class ■ ■ Drilling. 47 www. flange thickness and diameter per MIL-F-20042. Hub and socket per NAVSEA 810-4715319 for 2 NPS and above.188 6.563 .875 20.438 1.682 12 11 /16 8.375 2 581454 1 1/2 5.125 . per ANSI B16. per ANSI B16.500 4. Hub and socket per NAVSEA 810-4715319 for 1 1/4 NPS and above.5 294633 581721 Sizes not shown available upon request.063 .500 7.5 581640 581705 10 11 /16 7.5 for 1/2 to 1 NPS.5 .688 .125 .411 Number of Holes 6 Hole Diameter 11 /16 Bolt Circle 4.438 3 581438 2 1/2 6.875 10 581519 581608 1 Socket Weld Navy Flange.620 /16 6.355 4 9 1 /4 4.62 10 11 /16 7.938 2.813 15.625 .543 8 11 /16 5. flange thickness and diameter per MIL-F-20042.938 3.625 581577 .5 581624 581682 /16 5.500 4.688 1.411 581543 6 9 /16 4.552 5 9.813 F 2.913 6 11 3 6.950 6 581357 9 /16 3.563 6.70 4 9 /16 3.25 .000 4.563 D .5 581488 4 581527 7.alaskancopper.5 581501 581593 6 10. Nominal Pipe Size A D F Number of Holes Hole Diameter Bolt Circle Weight 90-10 Part Number 70-30 Part Number 1 4.682 581713 12 11 /16 8.438 1.0 90-10 Part Number 294227 70-30 Part Number 581674 2 1/2 6.938 3 581462 2 5.500 3.063 .0 581658 6 10.438 Weight 5.com .500 581569 2.063 5.125 1.563 10.913 6 9 /16 5.000 6.563 6 581496 581585 5 9.5 for 1/2 to 1 1/2 NPS.438 2. 150 Pound Class ■ ■ Drilling.813 8.543 8 9 /16 5.125 .563 5.0 581632 581690 8 11 4 7.552 8 9 /16 6. com .Copper-Nickel Flanges Solid Forged Copper Nickel Flanges. Spectacle Blind Flange Spectacle Blind Spectacle Blind Bolted In 48 Nominal Pipe Size 2 1/2 3 4 6 8 10 12 A (OD) 4 5/8 5 1/8 6 5/8 8 1/2 10 3/4 13 1/8 15 7/8 B (ID) Bore made to required specifications W 1 1 1 1 1 1 /2 1 1/2 1 1/2 C 2 3/4 3 3 3/4 4 3/4 5 7 /8 7 1/8 8 1/2 Hole Size 3 1 1 /4 3 /4 3 /4 7 /8 7 /8 www.5 NAVSEA 810-4715319-Butterfly Type (2c) MIL-F-20042 Threaded ANSI B16.5 Plate Flanges (Dimensions to your sketch) Socket Weld ANSI B16. Special Order Flanges Slip-On ANSI B16. 300 and 400.24 Silver-Brazing NAVSEA 810-1385947 MIL-F-20042 Face Fed or Grooved for Ring Note: ANSI B16.5 MIL-F-20670 Blind ANSI B16.5 Flanges Can be Ordered as Raised or Flat Faced. Classes 150.alaskancopper. 200.5 NAVSEA 810-4715319 AWWA Large Diameter Weld Neck NAVSEA 810-1385992 ANSI B16.5 ANSI B16. 3000 and 6000 90˚ Elbow Cross Hexagon Bushing 90˚ Elbow 45˚ Elbow Union Lateral Flush Bushing Street Elbow Cap Round Head Plug Tee Type 1 Reducer Insert Hexagon Head Plug Square Head Plug Tee Type 2 Reducer Insert Nipple Round fittings such as couplings. ■ ■ Socket Weld Fittings. center-to-center and center-to-end dimensions will meet or exceed applicable specifications. in sizes 2” NPS and under. or can be finished in a combination of ends when required. ■ Block pattern fittings are normally available in copper-nickel alloys. ■ Accurate bore provides slip fit alignment. Eliminates the necessity of tack welding or clamping prior to welding. ■ ■ 49 www.com .Copper-Nickel Fittings 90-10 & 70-30 Copper-Nickel Threaded Fittings.11. ■ Fittings are available in non-standard sizes and most corrosion resistant metals. ■ Available in non-standard sizes and dimensions. Shape fittings such as elbows. tees. ■ Mating ends of the fittings can be butt welding. Classes 150. ASTM and Navy specifications.11. ■ Wall thickness. ■ Sizes range from 1/8“ to 4” NPS with larger sizes upon application. ■ Dimensions are in accordance with ANSI B16. socket welding. crosses and laterals may be machined from plate.alaskancopper. Class 3000 and 6000 socket welding and threaded fittings conform to ANSI B16. ■ Fittings grooved or face fed for silver-brazing conform to MIL-F-1183. grooved or face fed for silver-brazing per MIL-F-1183 or threaded. MSS SP-79 and applicable ASME. Classes 3000 & 6000 90˚ Elbow Coupling 45˚ Elbow Half Coupling Tee Cross Cap Type 1 Reducer Insert Lateral Union Type 2 Reducer Insert Fittings are normally used where socket welding is desired for ease of assembly.3. ■ Class 150 threaded fittings conform to ANSI B16. caps and plugs may be machined from solid round bar. 050 1.315 1.5 .540 .840 1.660 1.alaskancopper.3 . ■ For Class 400 adaptors and unions.25 .675 .5 .3 .8 1 1.675 .3 .com . ■ Ends can be machined for Sil-Braze rings per MIL-F-1183.840 1.2 of NAVSEA 803-6297430. ■ Reducing sizes available.900 2.900 2. ■ ■ 90° Elbow Nominal Pipe Size 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 3 A Weight 90-10 Part Number 70-30 Part Number .5 2 553948 503951 589800 589818 589826 589834 589842 589850 553956 553964 589868 589876 589884 589892 589907 589915 OD B Weight 90-10 Part Number 70-30 Part Number 589923 589931 589949 589957 589965 589973 589981 589999 590005 590013 590021 590039 590047 590055 590063 590071 OD 3 /16 /16 11 /16 27 /32 1 /8 7 45° Elbow Nominal Pipe Size 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 3 .540 .25 .25 .6 1 1 2 OD C Weight 90-10 Part Number 70-30 Part Number 1 1 1 1 1 2 .375 1 1 1 1 1 2 .4 .375 3 /16 /16 11 /16 27 /32 1 /8 7 www.840 1.25 .900 2.050 1.25 . Class 400 90° Elbow 45° Elbow Tee Dimensions per NAVSEA 803-6397430.540 . see page 52.5 4 590097 590102 590110 558867 590128 468622 468630 468614 587206 590089 590136 590144 590152 590160 590178 590186 25 7 Tee Nominal Pipe Size 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 3 50 .660 1.375 /32 /8 1 1/16 1 7/32 1 5/16 1 7/16 .675 .9 1 2 2. Made from MIL-C-24679 forgings per paragraph 2.660 1.315 1.050 1.315 1.Copper-Nickel Socket Weld Fittings. 19 1. Reduction sizes available.12 2.81 .37 .25 .69 .31 1. ■ ■ 90° Elbow 45° Elbow Tee Nominal Pipe Size 70-30 Part Number 90-10 Part Number 70-30 Part Number 90-10 Part Number 70-30 Part Number 590267 590275 590283 590291 590306 590314 590322 590330 590348 590356 590364 590380 590398 590403 590411 590429 590437 590445 590453 590461 590479 590487 590495 590500 590518 590526 590534 590542 590550 590568 590576 590584 590592 590607 590615 590623 590631 590649 590657 590665 70-30 Part Number 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 3 OD A B C 90-10 Part Number .25 590194 590209 590217 590225 414893 590233 590241 590259 Socket Weld Dimensions per ANSI B16. ■ Class 150 dimensions are available.87 2.12 2.05 1.315 1.68 .94 2.06 1.73 . ■ Made from MIL-C-24679 forgings.80 . 51 www.12 1.75 1.81 .37 C .315 1.900 2.98 1.0 1.12 1.675 .50 1.11.12 1.62 1.25 1.25 1.37 90° Elbow 90-10 Part 70-30 Part Number Number 45° Elbow 90-10 Part 70-30 Part Number Number Tee 90-10 Part Number 295702 295710 231782 297657 297649 295728 297665 297673 295736 295744 298873 297681 295752 295760 298881 262995 295786 295794 298899 297699 295809 295817 297704 295825 581755 277500 277461 277518 402228 276198 494047 494055 494063 277479 277487 417045 421060 Sizes not shown are available.38 1.alaskancopper.0 1.540 .05 1.75 1.75 2.38 1.840 1.31 1.Copper-Nickel Forged Fittings.50 1.660 1. our quick turnaround time allows for a short term delivery.900 2.11 A combination of threaded and socket ends are available.0 1.75 2.94 2.43 1.31 1.com .375 2.92 1. ■ ■ Nominal Pipe Size OD A B 1 /4 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 4 3 .675 .95 1.74 1.82 .69 .875 3.500 4.82 1.87 3.540 .24 2.92 1.24 2.56 1.95 1.660 1.840 1. Class 3000 Threaded Class 3000 dimensions per ANSI B16.29 1.88 .500 .82 .375 .87 3. ■ Ends can also be machined for Sil-Braze rings per MIL-F-1183.56 1. ■ Reducing sizes available. alaskancopper. ■ Block pattern fittings available in all corrosion resistant alloys. Fittings are also available in Class 400 WOG. ■ Nipples may be provided threaded one end or both ends. ■ ■ 52 www. ■ Crosses available upon request. ■ ■ Nipples Single End Thread Double End Thread Threaded from MIL-T-16420K tube or ASTM B 466 Pipe. Short/close lengths available up to 12”.com . ■ Class 3000 reducing inserts conform to MSS SP-79.11.Copper-Nickel Machined Fittings Socket Weld Bushings Reducing Inserts Couplings Reducing Couplings Half Couplings Caps Available in Class 400 or Class 3000. ■ 90-10 UNS C70600 or 70-30 UNS C71500 ■ Above items available in socket weld or threaded. ■ Class 6000 also available. ■ Class 3000 socket weld fittings conform to ANSI B16. ■ ■ Threaded/Socket Weld MPT X FSW Adapters FPT X MSW Adapters Ground Joint Hex Plugs Unions Square Head Plugs Reduced Hex Bushing Machined from MIL-C-15726F in 90-10 UNS C70600 or 70-30 UNS C71500. Machined from MIL-C-15726F bar stock. ■ Mating ends of the fittings can be socket-welding or finished in a combination of ends when required. Class 400 Socket Weld Pilot and non-pilot bosses may be modified for threaded or silver braze. ■ ■ Pilot and Non-Pilot Bosses Silver Brazed per NAVSEA 810-1385912 ■ Silver Brazed per NAVSEA 810-1385950 Non-Pilot Boss. ■ Brazing outlet can be provided grooved for ring or champhered for face fed solder.alaskancopper. type of connection. Miscellaneous Outlets 53 Sanitary Hose Barb Outlets Elbow Outlet 45° Lateral Outlet www. Class 400 Socket Weld Threaded Brazed Buttwelding Brazed Outlets. ■ Ordering data necessary: Outlet size. Socket Weld Pilot Boss.Copper-Nickel Outlets Outlets.com . Class 3000 Threaded or Socket Weld Weld base ground for full penetration weld per MIL-STD-22D (P68 joint) Conforms to the requirementsof MSS SP-97. Class 400. run size for base. 9 x 240 74. ASME SB-171.84 x 240 48 x 96 48 x 120 43.18 x 240 55. 54 www.42 8.165 . ■ ■ Thickness Size Lbs/Sq Ft Lbs/Sheet 90-10 Part Number . ■ Average Mechanical Properties: Tensile 40. 62.0 12. Nominal Chemicals: Copper 88.032 . Sizes not shown may be available upon request.134 .Copper-Nickel Sheet & Plate 90-10 Copper-Nickel Sheet & Plate UNS Designation Numbers: 90-10 (UNS C70600).alaskancopper.180 .0 12.250 . All weights are approximate.0 12.65 x 180 61.125 .180 .77 9.250 .1875 .0 9.250 .8 5.8 15. Elongation 30%.8 6.0 12.18 x 180 49.063 .44 8.5 9. Specifications: pg.1 x 240 48 x 96 49.38 7.1875 . Yield 15. ■ Machinability = 20.0 9.0%.com .5 2.21 x 180 49.0 12.000 psi.250 .3125 38 x 96 36 x 120 36 x 120 48 x 120 48 x 120 39. Iron 1.43 x 240 61.6%.095 .0 12.000 psi.5 x 240 48 x 96 61.250 .0 14.180 . Nickel 10. ASTM B 171.3125 . ■ Widely used in marine applications where resistance to both corrosion and biofouling is important.250 .250 .85 x 240 1.50 x 180 55. ■ Specifications: MIL-C-15726F.4%.9 47 88 144 232 255 489 456 529 630 1008 1123 289 361 862 384 737 984 1145 1233 1490 473 1639 510306 141474 281096 141505 141513 446832 141555 433295 141602 433994 434005 254926 298182 435645 141636 141660 435653 433986 141686 561852 141725 431578 Dimensions are in inches.165 .9 4.565 x 240 43.0 9.0 12.156 .68 x 240 74. 375 .375 .com .375 .25 1. All weights are approximate.25 48 49.65 80 48 80 76.00 4.500 .375 .5 48 80 48 60 60 80 48 36 60 60 x 240 x 120 x 96 x 120 x 120 x 120 x 120 x 96 x 120 x 120 x 96 x 120 x 96 x 120 x 96 x 120 x 96 x 72 x 60 x 60 Lbs/Sq Ft Lbs/Sheet 90-10 Part Number 15.375 .00 1.42 74.375 .625 .750 .750 1.50 3.500 . 62.4 61.alaskancopper.50 2. 55 www.90-10 Copper-Nickel Sheet & Plate (continued) Thickness Size .313 . Sizes not shown may be available upon request. Specifications: pg.1 55.8 18 18 18 18 18 18 24 24 30 36 36 48 48 60 72 96 120 144 192 1956 1114 576 737 831 925 1200 757 1506 1971 1177 2487 1488 2400 2400 4737 3072 2093 2415 4785 483313 420624 141791 141806 141822 141814 141848 141864 141880 141903 141911 141937 420496 276279 141961 235516 510500 142006 142014 142022 Dimensions are in inches.00 74.00 1.00 2. Sizes not shown may be available upon request.625 . All weights are approximate. ASTM B 171.1875 .5 x 180 65 x 120 49.Copper-Nickel Sheet & Plate 70-30 Copper-Nickel Sheet & Plate UNS Designation Number: 70-30 (UNS C71500).125 .000 psi.165 . Nominal Chemicals: Copper 69. ■ Average Mechanical Properties: Tensile 50.43 7.43 x 180 61.00 32 x 120 24 x 144 48 x 120 48 x 120 49.250 .65 x 120 48 x 120 76.250 .3 788. Yield 20.92 9 9 12 12 12 12 15 18 18 18 24 30 36 48 48 60 72 84 96 120 144 192 80 106 232.375 .250 . Iron 0.50 1.375x 120 61.7 831 799.1875 .063 .com .18 x 180 55.375 .1 777.5%.00 2. 62. ■ Machinability = 20.095 .6 277.50 x 180 48 x 120 49.250 .56 6 6.134 . Nickel 30. ASME SB-171.1 x 120 55.313 . ■ Widely used in marine applications where resistance to both corrosion and biofouling is important.50 3. Elongation 30%.000 psi.7 736.2 365 360 586.00 1. Specifications: pg.5 830.75 2.3 960.8 960 2295 2160 1548 3227 4000 3000 2722 4205 2856 3744 2367 512968 141115 141123 141131 491112 488428 141157 250126 141199 467765 467773 509143 141246 276261 226004 141270 259405 141296 510550 141327 141343 141369 141377 271326 141416 235427 141458 Dimensions are in inches. ■ Specifications: MIL-C-15726F.00 4.alaskancopper. 56 www.25 1.6 924.750 1. ■ ■ Thickness Size Lbs/Sq Ft Lbs/Sheet 70-30 Part Number .375 .5 x 144 72 x 120 48 x 96 80 x 120 80 x 120 50 x 120 49 x 98 50 x 127.75 x 180 49.68 x 180 74.00 1.500 .5 36 x 96 52 x 72 37 x 49 3 4.0%.5%. com .710 143329 7 /8 70-30 Part Number 143028 (Ho1 Temper) 416934 143303 143002 143010 143036 2. Because of its excellent corrosion resistance. anti-fouling characteristics. resistance to erosion in turbulent water and strength under different conditions of temperature and pressure.850 476099 476099 4 48. Elongation 30%. Widely used in marine applications where resistance to both corrosion and biofouling is important. ASTM B 151.000 psi.Copper-Nickel Rod 90-10 & 70-30 Rod UNS Designation Numbers: 90-10 (UNS C70600) and 70-30 (UNS C71500).000 5 1/2 96.060 143345 143052 1 1/8 3. Iron 0.320 143337 1 3.5%. 143222 www. Yield 18. 62. Dimensions are in inches. 70-30: Tensile 45. All weights are approximate.000 7 156.6%.000 psi.000 143387 143086 1 3/4 9. Nominal Chemicals: 90-10: Copper 88.4%. Machinability = 20. Nickel 30.000 psi.000 143450 143159 3 28. Machinability = 20. Specifications: pg. ■ Stocked in random lengths.000 143272 1 57 90-10 Part Number 3 3 Lbs/Ft 0.320 143434 143133 1 2 /2 20.000 143468 143167 3 1/16 30.000 3 1/2 38.000 143379 143078 1 1 /2 7.000 143256 10 320. Nickel 10.130 143426 143125 2 3/8 17.000 143442 143141 2 3/4 24.432 1 /2 0.5%.500 5 80. Elongation 35%.750 143418 143109 1 2 /4 16. ■ Average Mechanical Properties: 90-10: Tensile 40.000 142983 143183 487244 4 /2 64.760 143400 143094 2 12.840 143353 295697 1 1 /4 5.0%. ■ Specifications: MIL-C-15726F. ■ ■ Diameter Size 1 /4 /8 0. ■ 70-30 Copper-Nickel rod is regarded as one of the best materials for marine applications because it is used in petroleum and chemical industries where conditions of temperature and corrosion are too severe for other alloys.200 143191 405438 143206 143214 283690 Sizes 5 1/2“ and over are hot forged and turned.alaskancopper.000 6 115.500 143248 9 258.000 psi. Sizes not shown may be available upon request. Iron 1. Yield 18.000 143361 143060 1 3/8 6. Temper 060 Soft.756 5 /8 1. 70-30: Copper 69.000 143264 143175 3 /4 42.0%.180 3 /4 1.000 143230 8 207. N ±0.06 +0 -0.06 ±0.38 ±0.19 ±0.12 ±0.09 ±0.06 ±0.19 * ±0.12 ±0.005 -.000 +.25 -0.25 ±0.000 Nominal Pipe Size Outside Diameter Wall Thickness 1 to 1 1/4 * ** Center-to-End A. the tangent length.12 * ±0.125 -.06 ±0.000 +.125 -.000 8 & larger * ** +.000 21/2 to 8 * ** +.12 ±0. ** Not less than 87.03 4 ±0. 58 www.03 5 to 8 +0. Commercial Grade Outside(1) Diameter at Bevel +0.06 ±0. Tees & Laterals Center-to End B.com . Y Center-to Center J Back-to Face P Alignment of Ends U Lap-Joint Stub Ends Outside Diameter of Lap G Dimensions are in inches.03 +0 -0.5% of nominal thickness in localized areas.188 -.12 ±0.06 ±0. Tees.375 -.19 ±0.000 +.03 20 to 24 +0.125 -.09 ±0.188 -.250 +.19 * ±0.38 ±0.000 +.25 ±0.03 +0 -0.25 -0.09 ±0.06 ±0.19 ±0.125 -.375 +.007 -.000 +.06 * ±0.007 -.000 +.16 -0.06 -0.25 ±0.06 ±0.25 -0.003 -. K.25 ±0. E +.38 Nominal Pipe Size 1 /2 to 21/2 Reducers & Lap-Joint Stub Ends Caps & Heads Over-all Over-all Length H.000 11/2 to 2 * ** +.06 ±0.Fitting Tolerances NAVSEA DWG 810-1385880 D All Fittings 90° & 45° Ells.125 -.19 * ±0. (1) Out of round is the sum of absolute values of plus and minus tolerance.25 ±0.03 +0 -0.06 * ±0.25 ±0.125 -. Sizes not shown may be available upon request. (2) The inside diameter at ends and the nominal wall thickness are to be specified by the purchaser.250 +.03 * ±0.125 -.09 ±0.000 Height F +.125 -. M Height F.25 ±0.03 10 to 18 +0.250 -.06 ±0.19 ±0.25 ±0.19 ±0.25 ±0. W +.250 -.03 3 to 31/2 ±0. * Not less than 87.000 +.250 Inside Diameter G +.06 ±0.5% of nominal thickness.19 ±0.03 Inside (2) Diameter at End Wall Thickness 90° & 45° Ells.alaskancopper.000 +.25 ±0.25 ±0. * Major and minor outside diameter at any one cross section shall not exceed 3% of the nominal outside diameter.000 Center-to-Center C-C +.12 ±0.09 -0. Swp Tees & Lateral Reducers & Sleeves Caps 180° Return Bends Sleeves End-to-End L.03 +0 -0.000 Note: Tolerance of outside diameter shall be in accordance with MIL-T-16420K for a length equal to dimension C.06 +0 -0. D.25 ±0.03 26 to 30 +0. Sizes not shown may be available upon request.06 * ±0. B.25 ±0.125 -.38 32 to 48 +0.188 -.000 +.06 ±0.250 -. 157 .250 .058 .188 .375 .375 .083 .375 .095 .068 .250 .500 .109 .065 .065 .156 .095 .082 .065 .250 .425 Class 3300 .083 .083 .083 .276 .095 .250 . Sizes not shown may be available upon request.188 .095 .109 .180 .127 .134 .120 .065 .146 .165 .095 .150 .109 .840 1.219 .095 .66 1.203 .182 .312 Extra Strong .083 .500 .425 . Dimensions are in inches.337 .322 .083 .304 .134 .065 .200 .380 .126 .134 .134 .165 .049 .149 .120 .203 .340 .05 1.220 .220 .180 .065 .500 .90 2 3/8 2 7/8 3 1/2 4 4 1/2 5 9/16 6 5/8 8 5/8 10 3/4 12 3/4 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 ANSI B36. 59 www.180 .258 .180 .147 .148 .250 .365 .216 .218 .458 Class 6000 .321 .250 .179 .437 MIL-T-16420K Minimum Walls Class 50 .375 .380 .500 .218 .454 . Alaskan will use the regular schedule thickness shown for all sizes not specified by a standard unless otherwise directed.375 .500 .134 .134 .375 .165 .072 .109 .405 .065 .19 Nominal Walls Sch 5s Sch 80s .250 .095 .218 Sch 10s .500 .091 .187 .120 .203 .109 .126 .107 .250 .125 .340 .154 .375 .095 .375 .500 .049 .165 . Wall thickness for 8” regular per ASTM B 42.540 .280 .072 .312 Wall thicknesses for Class 200 size 14” through 24” are per Alaskan Standard.083 .191 .375 .375 .218 .500 .180 Class 200 Class 700 Class 1650 .133 .088 .180 .500 .109 .065 .140 .148 .156 .114 .375 .500 .134 .375 .083 .165 .259 .120 .065 .062 .432 .120 .375 .250 .203 .188 .109 .156 .083 .083 .238 .500 .com .065 .675 .120 .100 . ASTM and MIL-T-16420K Nominal Pipe Size 1 /8 1 /4 3 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 Outside Diameter .31 1.300 .120 .250 .188 .Copper-Nickel Comparison of Wall Thicknesses Pipe and Tubing: ANSI.042 .500 .375 .520 .165 .284 .072 .375 .alaskancopper.109 .203 .318 .500 .312 Sch 40s .300 .500 .065 .500 .250 .120 .237 .250 .250 .250 .500 .500 .375 .058 .375 ASTM B 466 Nominal Walls Regular .072 .148 .188 .145 .280 .113 .226 .500 .500 .109 .194 .156 .065 .375 .165 .375 .065 .109 .380 .065 .072 .187 .148 .250 .500 .340 .500 .090 .123 .154 .119 .341 .375 .221 .375 .250 . ASTM B 466 (ASME SB-466 is generically identical) This specification includes Alloy 9010 and Alloy 70-30 seamless copper-nickel pipe intended for general engineering purposes. seamless tubing is specified as Type I and welded tubing as Type II. See pages 6 and 7 for sizes carried in stock. strip or plate in the copper-nickel Alloys 90-10 and 70-30. See page 8 for sizes carries in stock. Fittings with special configurations can also be manufactured. 3300. Buttwelding NAVSEA 810-1385880 D This drawing provides a basic plan for the manufacture of 200 PSI at 150 F maximum seamless and welded 9010 copper-nickel fittings for use on shipboard piping systems. 60 Alaskan manufactures a complete line of 90-10 and 70-30 copper-nickel fittings in accordance with this drawing. ANSI B16.3.5. Alaskan manufactures 90-10. strip or plate.g.11. See pages 5 and 8 for sizes carried in stock.. See pages 3-7 for sizes carried in stock. Under this specification. evaporators and heat exchangers. (Class identification denotes maximum working pressure in lbs/sq. MIL-T-16420K This specification covers coppernickel tubing in Alloys 90-10 and 70-30 intended for basic piping systems on surface ships and submarines. laterals and long turn tees). Alaskan stocks tubing of this specification in Alloy C12200 (phosphor-deoxidized). www. Alaskan stocks B 111 tubing in the copper-nickel Alloys 90-10 and 70-30 and in Arsenical Admiralty Brass. in those diameters and schedule wall thicknesses as shown in ANSI B36. MSS SP-43 and SP-79. Commercial Grade This designation covers seamless and welded copper-nickel buttwelding fittings intended for general corrosive service in fresh and salt water environments. eccentric reducers. See pages 6 and 7 for sizes carried in stock.com . in.19 (See page 59). See pages 9 and 10 for sizes carried in stock. Fittings are made to dimensionals standards ANSI B16. ANSI B16.28. Alaskan stocks this tubing in Classes 50. Alaskan stocks Grade 1 (lot identified) MIL-T16420 tubing. 200.). 6000 and other special classes. ANSI B31.1. MIL-T-16420K tubing. ASTM B 467 (ASME SB-467 is generically identical) This specification covers Alloy 90-10 and Alloy 70-30 welded copper-nickel pipe intended for general engineering purposes. ASTM B 608 This specification covers welded copper alloy pipe intended for use in brackish water or seawater piping systems.alaskancopper. MIL-T-24107A This specification covers annealed and drawn temper seamless copper tubing in nominal pipe size diameters.Specifications Pipe and Tubing MIL-T-15005E Amend 3 This specification covers fully annealed copper-nickel condenser and heat exchanger tubing in Alloys 90-10 and 70-30. ANSI B16.9. Alaskan manufacturers B 608 pipe from ASTM B 171 annealed sheet. Alaskan pipe of this specification is rolled and straight-seam welded from ASTM B 171 annealed sheet. ASTM B 111 (ASME SB-111 is generally identical) This specification covers copper and copper alloy seamless condenser tubing intended for use in industrial condensers. This drawing is also used as a general guideline throughout the shipbuilding industry for specifying 70-30 copper-nickel fittings and other fitting configurations not shown on the drawing (e.1. ANSI B16. See pages 9 and 10 for sizes carried in stock. reducing elbows. 700. ANSI B16. 70-30 and other weldable copper alloy commercial grade fittings in either the “as welded” or “annealed” condition and generally. short radius 90 elbows. Fittings manufactured per this drawing are fully annealed and are intended for use with Class 200. Grade 2 (heat identified) is available upon request. drawn temper. Welding Fittings. 1650. Alloy C44300. and are designed for either buttwelding or for welding with slipon sleeves. Alaskan Copper machines bosses from 70-30 coppernickel bar stock which meets MIL-C15726F. NAVSEA 810-4715319 This drawing covers “Navy” flanges forged from copper. www. T-316L and T-321 stainless steel belled end fittings per MSS SP-119. Slip-On flanges are also covered as Class 150 (1A) and 250 (5A) with “Navy” drilling.alaskancopper. oil and water service. This specification also covers seamless and welded socket weld fittings in stainless steel and copper-nickel. It is subdivided by “figure” numbers. Alaskan manufactures a complete line of 90-10 and 70-30 copper nickel. T-316L and T-321 stainless steel belled end fittings. Shapes (elbows and tees) made from forgings. for steam service. Modification to socket and alloy can be accomodated. intended for use with Schedules 5s and 10s stainless steel and Class 200 and Class 50 copper-nickel piping systems. Figure 2C flanges are also socket weld. and rated for 200 psi @ 425 degrees F. Socket weld flanges are designed for use with Class 200 tube. These fittings are rated for 400 psi @ 150 degrees F.nickel. for air. T-304L. Other alloys are available on request. Alaskan manufactures a complete line of 90-10 and 70-30 copper nickel. Socket dimensions are similar to MIL-F-1183.Specifications Welding Fittings. Bores shown are for use with wall thicknesses per MIL-T-16420K. Belled end fittings are designed for fillet welding which improves fit-up and welding time and allows for visual inspection for joint efficiency without radiography. MSS SP-119 belled end fittings are mostly identical to NAVSEA fittings with some minor changes in the tangent lengths of street fittings. Belled End Fittings NAVSEA 802-5959353 Appendix B MSS SP-119 Belled End Fittings Belled End Fittings This appendix provides a basic plan for the manufacture of seamless and welded (wrought) socket welding fittings in stainless steel and copper-nickel. Figures 2A and 5C are socket weld with “Navy” drilling. Bores may be modified to match commercial wall thicknesses. T-304L. are allowed. as are straight fittings made from bar stock. NAVSEA 810-1385950 This drawing covers Class 3000 bosses similar to NAVSEA 8101385912 but differs in the exterior radiused finished around the weld base. Other alloys are available on request. Flanges and Bosses NAVSEA 810-1385992 This drawing covers Class 250 welding neck flanges forged in 90-10 and 70-30 copper-nickel.com . NAVSEA 803-6397430 Socket Weld Fittings This drawing covers 400 psi 90-10 and 70-30 copper-nickel socket weld fittings intended for use with Class 200 or Class 700 tubing per MIL-T16420. but with commercial drilling for butterfly valves. 61 NAVSEA 810-1385912 This drawing covers Class 3000 bosses with sockets grooved for silver-braze rings. rated as Class 200. intended for use with Schedules 5s and 10s stainless steel and Class 200 and Class 50 copper-nickel piping systems. For Class 150 (2A) and 250 (5C). Bosses are pilot type weld base. see MSS SP-43. 300.3 This specification covers requirements for malleable-iron threaded fittings Class 150 and 300. B 16. MSS Standard Practices SP-51 This specification covers Class 150 corrosion resistant cast flanges and flanged fittings.9 This specification covers butwelding fittings from 1/2” through 48” nominal pipe size.Specifications Sheet. bushings.11. 400. sheet and plate in Alloys C70600 (90-10) and C71500 (70-30). See pages 54-56 for products and sizes carried in stock. lap-joint and blind flanges for the above ratings and/or to denote “commercial” drilling. www. including ratings for Classes150.15 This specification covers Class 125 and 250 cast (forged or machined) bronze threaded fittings from 1/8” through 4” nominal pipe size with Class 125 or 250 rating.com . Alaskan stocks sheet and plate in Alloys C70600 (90-10) and C71500 (70-30). Plate. socket weld. bar.28 This specification covers buttwelding short radius elbows and returns from 1/2” through 24” nominal pipe size. 1500 and 2500. socket weld and threaded types.5 This specification covers flanges and flanged fittings. tolerances or of other wrought materials. B 16. SP-97 This specification covers requirements for Class 3000 and 6000 90 degree carbon steel forged branch outlet fittings of buttwelding. Dimensional standards are commonly used for other alloys such as copper-nickel and stainless steel. strip and rolled bar. ASTM B 171/ASME SB-171 This specification covers rolled and annealed copper-nickel alloy plate and sheet intended for use for pressure vessels. ANSI (ASME) B 16. Sizes are from 1/2” through 24” nominal pipe size. B 16. strip. These products are available hot forged in soft and hard tempers. For specifications covering low pressure corrosion resistant buttwelding fittings. 900. MIL-C-15726 This specification covers copper-nickel rod. which is certified to MIL-C15626 and meets the requirements of ASTM B 151. welding neck. couplings and caps. This material is certified to MILC-15626F and meets the requirements of ASTM B 151. slip-on. Rod and Bar ASTM B 151 This specification covers copper-nickel rod and bar. 62 SP-79 This specification covers Class 3000 and 6000 socket weld reducing inserts for use with B 16. SP-83 This specification covers requirements for Class 3000 socket weld or threaded forged carbon steel pipe unions. Reducing inserts may be made to special dimensions other than those covered by this standard by agreement between manufacturer and the purchaser. Used for dimensions and tolerances of threaded fittings from 1/8” to 6” nominal pipe size. sheet.alaskancopper. Fittings may be made to special dimensions. size shape. Alaskan stocks rod and bar in Alloys C70600 (90-10) and C71500 (70-30). ASTM B 122 This specification includes coppernickel plate. Alaskan stocks rod and bar in Alloys C70600 (90-10) and C71500 (70-30). B 16.11 This specification covers requirements for forged carbon and alloy steel fittings both socket weld and threaded. flat wire. B 16. B 151 This specification covers coppernickel alloy rod and bar in various annealed and drawn tempers. 600. Certain requirements also pertain to wrought or cast plugs. Used for dimensions and tolerances of threaded. See pages 5456 for sizes carried in stock. express or implied. 150. Purchaser must inspect the goods. Alaskan shall not be liable under any circumstances. acknowledgement or invoice. threaded pieces. that the goods will conform to the express specifications shown on the applicable quotation. Alaskan warrants to Purchaser. No goods shall be deemed defective if the alleged defect is discoverable only by inspection means more stringent than those requested by Purchaser in connection with the placing of its order. no liability for loss of profits or revenue. fitness for particular purpose.Specifications Military Specifications MIL-C-24679 This specification covers coppernickel forgings in alloy C70600 (9010) and C71500 (70-30). any claim for breach of warranty (express or implied). Alaskan makes no other warranty of any kind. This type socket is a very tight fit for nominal pipe (+. (including no warranty of merchantability. Used as reference to denote “Navy” drilling for other flanges. cost of substitute equipment. MIL-STD-22 This specification covers full penetration weld base fittings for socket weld. at its sole expense.alaskancopper. MIL-F-20042 This specification covers Class 50. Previously included in MIL-C-15726E. tort (including negligence) or strict liability. loss of use of goods or services or other items to be furnished to Purchaser hereunder. including but not limited to. ground joint unions and their sub assemblies (i. rather than to Purchaser’s improper installation. incidental. but not limited to. buttwelding. Alaskan shall determine whether defects exist which are attributable to it. this specification has also become the dimensional standard for many Class 400 WOG coppernickel fittings not covered under NAVSEA 803-6397430. and brazing outlets.e. In particular. Purchaser’s sole and exclusive remedy for defective goods or services shall be. MIL-F-20670 Class 150 slip-on and weld neck flanges in carbon steel. acknowledgements or invoices. 100. special or consequential damages arising from or out of this agreement or the goods or services purchased hereunder. If Purchaser shall have timely notified Alaskan of alleged defects in the goods and made the goods available for inspection and testing by Alaskan.000”) and requires special preperation of the pipe before insertion into the socket. but not to anyone else. replacement or refund of pur chase price. including. usage or trade) to any person or entity with regard to the goods or services covered hereby and forbids Purchaser to represent otherwise to anyone with which it deals. within ten (10) days of the receipt thereof and notify Alaskan of any claimed defect. at Alaskan’s option. for any actual.com . Used as a reference for dimensions and tolerances for alloys other than carbon steel. gas or steam service not to exceed 425 Deg. oil. MIL-F-1183 Originally written to cover the manufacture of cast bronze silver-braze fittings. tail pieces and nut).003”-. contingent. shortage or inaccuracy therein within ten (10) days thereafter or it shall be 63 held to have waived its right to seek remedy thereof or recovery thereon from Alaskan. Under these terms. MIL-F-1183 is often referenced in copper-nickel fittings and bosses to denote a socket that is to be grooved for silver-braze ring or chamfed for face fed solder. proceed to remedy the defects under the options available to it in the following paragraph. F. www. if it determines that there are. use or maintenance and. 250 and 400 silver-brazed bronze pipe and bulkhead flanges for use with water. customers or other third parties for damages. cost of capital. additional costs incurred by Purchaser at its plant or in the field (whether by way of correction or otherwise) or claims of Purchaser’s. repair. Warranty Alaskan sells its products under terms and conditions of sale which appear on applicable quotations. Dimensions are in inches.75 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 1 1/2 1 1/8 1 1/2 1 7/8 2 1/4 3 3 3/4 4 1/2 6 7 1/2 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 /2 /4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 3 NAVSEA LR 90 A B 16.840 1.375 2.Dimensional Summary Welding Fittings Nominal Pipe Size Outside Diameter B 16.66 1.28* SR 90 K NAVSEA SR 90 A B 16.31 1. 64 www. K B 16.875 3. Belled end fittings: See pages to for dimensions.625 10.50 5.90 2.562 6.75 12.9 NAVSEA Tees or Cross E.625 8.9 LR 90 K 1 .com .50 4. * Sizes 26” through 48” are per Alaskan Standard.9 LR 45 N NAVSEA LR 45 B B 16. Sizes not shown may be available upon request.alaskancopper.05 1.9 NAVSEA Reducer L. H ANSI Stub End F 5 /8 /16 7 /8 1 1 1/8 1 3/8 1 3/4 1 7/8 2 1/2 3 1/8 3 3/4 5 6 1/4 7 1/2 8 3/4 10 11 1/4 12 1/2 13 1/2 15 16 17 1/2 18 1/2 19 3 / 4 21 22 1 / 4 23 5/8 24 7/8 26 1/8 27 3 / 8 28 5 / 8 29 7 / 8 7 2 2 7/16 2 15/16 3 23/32 4 5/8 5 13/32 6 31/32 8 19/32 10 11/64 13 3/8 16 9/16 19 11/16 21 1/2 24 1/2 27 1/2 30 1/2 33 1/2 36 1/2 1 1/8 1 11/32 1 5/8 1 31/32 2 7/16 2 49/64 3 29/64 4 13/64 4 29/64 6 11/32 7 25/32 9 9/64 9 1/4 10 1/2 11 3/4 13 14 15 1/2 19 22 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 3 29/32 4 31/32 6 3/32 7 11/64 9 3/8 11 9/16 11 11/16 14 1/2 16 1/2 18 1/2 20 1/2 22 1/2 24 1/2 30 1/2 36 1/2 1 1/8 1 1/2 1 7/8 2 1/4 2 1/2 3 3 3/8 4 1/8 4 7/8 5 5/8 7 8 1/2 10 11 12 13 1/2 15 16 1/2 17 19 1 / 2 20 1 / 2 22 23 1 / 2 25 26 1/2 28 29 1 / 2 1 1/2 2 2 2 1/2 3 3 1/2 3 1/2 4 5 5 1/2 6 7 8 13 14 15 20 20 20 24 24 24 24 24 24 24 24 24 24 28 28 3 4 4 4 6 6 6 6 8 8 8 10 10 12 12 12 12 12 12 ANSI Stub End M 2 2 2 2 2 2 1/2 2 1/2 2 1/2 3 3 3 1/2 4 5 6 6 6 6 6 6 Dimensions for welding fittings with OD and ID tubing size diameters are identical to the fitting dimensions above. and custom fabrication. fabrication. revised and improved to meet the increasing challenges and complexity of specifications for piping.com .. documentation and packaging. hydrotesting and dimensional checking further confirm the quality that the program creates. drafting. U and U2 in accordance with Section VIII of the ASME Boiler and Pressure Vessel Code. so that a product is fabricated correctly the first time. liquid penetrant examination. the Alaskan Quality Program has been continually analyzed. Our program of proven procedures also enables the certification of parts and pressure vessels with the symbols of UM.conformance to specification. Heat-treatment stress relieves fittings after forming. Your purchase of Alaskan quality-crafted products will enable us to share with you our experience. scheduling.. Hydrotesting verifies pressure capabilities of pipe and tubing. Thus our goal. ultrasonic gaging. www. Alaskan Quality is achieved through a rigorous program designed to get the right instructions to the right people. Specialized film reader and digital densitometer are used in interpreting radiographic film. the Purchaser. fittings. Radiographic inspection checks the integrity of welds. Geometric accuracy is checked on all Alaskan fittings. Alaskan’s facilities for radiography.is consistently shared with you... layout. Our current Quality Program allows us to create an assignment of responsibility for engineering. purchasing.alaskancopper. knowledge and dependability. examination. Since our beginning in 1913. Aluminum and Stainless Steel Sheet. B. Pipe.. OREGON 97208-5067 2440 SOUTHEAST RAYMOND (97202-4638) PHONE (503) 238-7171 FAX (503) 238-6849 Vancouver. WASHINGTON 98124-3546 3200 SIXTH AVENUE SOUTH (98134-2106) PHONE (206) 623-5800 Fabrication Division: Fax (206) 382-4306 Stainless Products Division: Fax (206) 382-7346 ALASKAN COPPER & BRASS COMPANY Seattle P. CALIFORNIA 92154-3404 PHONE (619) 423-2546 FAX (619) 423-5310 Kent 27402 72nd AVENUE SOUTH KENT. Bar.C. Bar. BOX 3546 SEATTLE. Nickel-Alloys. CANADA V3K3V7 PHONE (604) 937-6620 FAX (604) 937-0838 www. Special Fabrications and Prefabricated Piping Systems Fax (206) 382-4306 • Copper-Nickel Products Alaskan Copper Works Copper-Nickel Sheet. Tanks. The following publications from Alaskan Copper & Brass Company and Alaskan Copper Works are available upon request. BOX 3546 SEATTLE. Fittings and Flanges Fax (206) 382-7335 • Bosses and Welding Outlets Alaskan Copper & Brass Company Branch Outlets Available in Copper-Nickel. Plate.O.O. BOX 8236 CHULA VISTA.com . Bronze. FAX (604) 937-0838 Alaskan Copper Works Stainless Products Division Fax (206) 382-7346 • Fabrication Division Alaskan Copper Works Fabrication Division Corrosion Resistant Alloy Heat Exchangers. Pipe Tubing. BOX 5067 PORTLAND. B.O.alaskancopper.C. Stainless Steel and Other Corrosion Resistant Alloys Fax (206) 382-7335 ALASKAN COPPER WORKS P. Fittings and Flanges Fax (206) 382-7335 Portland. • Mill Products Stock List Alaskan Copper & Brass Company Copper. Oregon Fax (503) 238-6849 • Stainless Steel Piping Products Stainless Steel and Other Corrosion Resistant Metal Pipe. Columns. B. SUITE A SAN DIEGO.O. Plate. Flanges and Fittings Vancouver. 225 NORTH ROAD COQUITLAM. Tubing. CALIFORNIA 91912 1333 30th STREET.C. Pressure Vessels. WASHINGTON 98032 PHONE (206) 623-5800 FAX (206) 382-7335 Portland P. Brass. WASHINGTON 98124-3546 3223 SIXTH AVENUE SOUTH (98134-2105) PHONE (206) 623-5800 FAX (206) 382-7335 San Diego P.Did You Know? Alaskan Copper & Brass Company and Alaskan Copper Works are the nation’s largest combination full service center and manufacturer of corrosion resistant alloy products.