MotorolaAXS-Series CLI Reference Guide supporting Release 7.4 This document explains the AXS-Series system’s Command Line Interface and supporting commands. COMPASS ID: 397450931 VER 02 DECLARATIONS Document Notice EXCEPT AS INDICATED IN THE APPLICABLE SYSTEM PURCHASE AGREEMENT, THE SYSTEM, DOCUMENTATION AND SERVICES ARE PROVIDED "AS IS", AS AVAILABLE, WITHOUT WARRANTY OF ANY KIND. MOTOROLA MOBILITY, INC. DOES NOT WARRANT THAT THE SYSTEM WILL MEET CUSTOMER'S REQUIREMENTS, OR THAT THEIR OPERATION WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT ANY ERRORS CAN OR WILL BE FIXED. MOTOROLA MOBILITY, INC. HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE SYSTEM AND SERVICES INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF TITLE, NON-INFRINGEMENT, INTEGRATION, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR PERFORMANCE OR USAGE OF TRADE. EXCEPT AS INDICATED IN THE APPLICABLE SYSTEM PURCHASE AGREEMENT, MOTOROLA MOBILITY, INC. SHALL NOT BE LIABLE CONCERNING THE SYSTEM OR SUBJECT MATTER OF THIS DOCUMENTATION, REGARDLESS OF THE FORM OF ANY CLAIM OR ACTION (WHETHER IN CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE), FOR ANY (A) MATTER BEYOND ITS REASONABLE CONTROL, (B) LOSS OR INACCURACY OF DATA, LOSS OR INTERRUPTION OF USE, OR COST OF PROCURING SUBSTITUTE TECHNOLOGY, GOODS OR SERVICES, (C) INDIRECT, PUNITIVE, INCIDENTAL, RELIANCE, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF BUSINESS, REVENUES, PROFITS OR GOODWILL, OR (D) DIRECT DAMAGES, IN THE AGGREGATE, IN EXCESS OF THE FEES PAID TO IT HEREUNDER FOR THE SYSTEM OR SERVICE GIVING RISE TO SUCH DAMAGES DURING THE 12-MONTH PERIOD PRIOR TO THE DATE THE CAUSE OF ACTION AROSE, EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS ARE INDEPENDENT FROM ALL OTHER PROVISIONS OF THIS AGREEMENT AND SHALL APPLY NOTWITHSTANDING THE FAILURE OF ANY REMEDY PROVIDED HEREIN. All Motorola Mobility, Inc. products are furnished under a license agreement included with the product. If you are unable to locate a copy of the license agreement, please contact Motorola Mobility, Inc. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Motorola Mobility, Inc. Motorola Mobility reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola Mobility to provide notification of such revision or change. Motorola Mobility provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola Mobility may make improvements or changes in the product(s) described in this manual at any time. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. All other trademarks are the property of their respective owners. ©2012 Motorola Mobility, Inc. All rights reserved. Release Date: April 25, 2012 Document Part Number: Compass ID: 397450931 Ver 02 COMPASS ID: 397450931 VER 02 DECLARATIONS-1 AXS-SERIES OLT COMMAND LINE INTERFACE USER’S GUIDE APRIL 25, 2012 DECLARATIONS-2 COMPASS ID: 397450931 VER 02 COMMANDS acceptsw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 779 add mstp olt (lag | gigeport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503 add mstp instance instid (id) priority (num) vlan (vlan-range) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504 add mstp vlan instid (id) vlan (vlan-range) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506 add ont ({slot-port | slot-port-channel}) type (ont-type-gpon) registration-id (regid) . . . . . . . . . . . . . . . . . . 223 add port gige (slot-port) lagroup (lagid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 488 add port vg-ds1 (ds1aid) ig (slot-igtype-index) ds1map ({1-28}) shelf ({a | b | c | d}) . . . . . . . . . . . . . . . . . . . 955 add port vg-ds1 (ds1aid) t1cas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 958 add potschannel eh248 ont (potsport) name (chname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 959 add potschannel ont (potsport) vg-voice ({crv | timeslot}) signalcode (signalcode) name (chname) transpath (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 961 add user name (username) privilege (privilege-level) password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 745 add vlan-member svid (svlanid) olt (oltwanaid) tx-td (traf-name) rx-td (traf-name) state ({active | inactive}) eth-cfm (state) mepid (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 646 add vlan-member svid (svlanid) ont (ontportaddr) cvid (cvlanid) cpevid (cpevid) tx-td (traf-desc) rx-td (traf-desc) tcont (tcontid) state ({active | inactive}) pbit ({0-7}) eth-cfm (state) mepid (value) . . . . . . 648 audit database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 backup database name (backupname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 780 clear aco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 925 clear log alarms-cond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 926 clear loopback port (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 566 clear mac-table ont (enetorponport) vlan (ontvlanid) mac (address). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 911 clear mac-table port (wanorponport) svid (svlanid) mac (address) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 913 clear slot (slot). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 clear timing refsw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 886 copy acl-ip (aclname) to (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 copy acl-mac (aclname) to (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 copy active database version (version-id) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 771 copy ont from (ontaddress) to newsn (sn) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 del acl-ip (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 del acl-mac (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 del chassis misc-input (number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 del chassis out-of-band-mgt (sw-a-enet-mgt1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428 del chassis default gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721 del chassis in-band-mgt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722 del conn name (connection-name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 COMPASS ID: 397450931 Ver02 INDEX-1 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 del conn olt (oltaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 del conn ont (connendpointaid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 del database backup name (backupname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 783 del database backup version (version-id) name (backupname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 784 del eth-cfm mep olt (cfmport) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 del ig (slot-igtype-index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 964 del ip route (ipaddress) mask (subnetmask) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 del iptv chbwtable name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 del lagroup (lagaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489 del mstp olt (lag | gigeport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508 del mstp instance instid (id). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509 del mstp vlan instid (id) vlan (vlan-range) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510 del nvm version (version-id) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 del ont id ({ontserial | ontaddress}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526 del pon-protn (primaryponport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527 del port gige (slot-port) lagroup (lagid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490 del port vg-ds1 (ds1aid) ig (slot-igtype-index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 966 del port vg-ds1 (ds1aid) t1cas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 968 del potschannel conn (connection-name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 969 del potschannel eh248 ont (potsport). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 970 del potschannel ig (slot-igtype-index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 971 del potschannel ont (potsport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973 del potschannel t1cas (ds1aid). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 974 del potschannel vg-voice ({crv | timeslot}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 975 del profile dscpmap name (dscpmapname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 626 del profile enetport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 572 del profile hcnaport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 573 del profile iptv name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 del profile l2config name (l2configname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417 del profile lldp-med name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418 del profile mocaport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 574 del profile ont-eh248config name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 977 del profile ont-profile name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 714 del profile ont-qosconfig name (ontqosconfigname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419 del profile ont-sipconfig name (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715 del profile pbitremap name (pbitremapname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627 I COMPASS ID: 397450931 Ver 02 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 del profile poeconfig name (poeconfigname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294 del profile potsport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 575 del profile vdslport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 576 del profile videoport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 577 del rule acl-ip (aclname) rule (rule number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 del rule acl-mac (aclname) rule (rule number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 del security-ipsec peer-ip (ip-address) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 771 del security-radius svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 738 del session id (session-id) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 747 del snmp trap-dest (ipaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 725 del traffic table name (traf-name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 905 del user name (username) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 748 del video-rpd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 948 del vlan name (vlanname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 del vlan svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 del vlan-member svid (svlanid) olt (oltwanaid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 654 del vlan-member svid (svlanid) ont (ontportaddr) cvid (cvlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 flush database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 init database. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 insert cfm loopback olt (cfmport) svid (svlanid) dest-mac (macaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 insert cfm loopback ont (ontportaddr) dest-mac (macaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 insert rule acl-ip (aclname) rule (rule number) action ({permit | deny}) outer-vlan (vlanid) src-ip ({ipaddress | any}) src-mask (mask) dest-ip ({ipaddress | any}) dest-mask (mask) src-port (tcpudpportvalue) dest-port (tcpudpportvalue) protocol (value) rate (rate-kbps) new-pbit (value) comment (acl-comment) . . . . . . . . . 73 insert rule acl-mac (aclname) rule (rule number) action ({permit | deny}) outer-vlan (vlanid) src-mac ({macaddress | any}) src-macmask (mask) dest-mac ({macaddress | any}) dest-macmask (mask) ethertype (hexvalue) pbit (value) new-pbit (value) comment (acl-comment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 installbootrom slot (slot) version (version-id) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 784 locate learned-mac (macaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 915 modify conn (connection-name) tx-td (traf-name) rx-td (traf-name) eth-cfm (state) mepid (value) . . . . . 5 modify conn (connection-name) tcont (tcontid). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 modify vlan name (vlanname) bind-ip-address (ip-address) mask (mask) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 658 modify vlan name (vlanname) bmc-rate (ratevlan). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660 modify vlan name (vlanname) description (text) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 661 modify vlan name (vlanname) dn-rate-limit ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 662 modify vlan name (vlanname) forwarding-mode (fwdmode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 663 modify vlan svid (svlanid) bind-ip-address (ip-address) mask (mask) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 664 COMPASS ID: 39745093 INDEX-3 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 modify vlan svid (svlanid) bmc-rate (ratevlan). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 666 modify vlan svid (svlanid) description (text) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667 modify vlan svid (svlanid) dn-rate-limit ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 668 modify vlan svid (svlanid) forwarding-mode (fwdmode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 669 modify vlan svid (svlanid) name (vlanname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670 modify vlan-member svid (svlanid) olt (oltwanaid) tx-td (traf-name) rx-td (traf-name) state ({active | inactive}) eth-cfm (state) mepid (value) membername (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671 modify vlan-member svid (svlanid) ont (ontportaddr) cvid (cvlanid) tx-td (traf-desc) rx-td (traf-desc) state ({active | inactive}) eth-cfm (state) mepid (value) pbit ({0-7, none}) dn-rate-limit ({enable | disable}). . . . 674 modify vlan-member svid (svlanid) ont (ontportaddr) membername (name) . . . . . . . . . . . . . . . . . . . . . . . . 677 modify vlan-member svid (svlanid) ont (ontportaddr) tcont (tcontid) cvid (cvlanid). . . . . . . . . . . . . . . . . . 680 modify vlan-member-mcast svid (svlanid) ont (ontdataaddress) iptv-profile (profile) . . . . . . . . . . . . . . . . . 180 ontacceptsw (ontaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373 ontget sip-profile ont (ontaddress) profile ({trustanchor | lnp | all}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 916 ontget sip-profile pots (ontpotsaddress) profile ({device | application | user | all}). . . . . . . . . . . . . . . . . . . . . 918 ontinstallbootrom ont (ontaddress) version (version-id) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 ontinstallsw (ontaddress) version (version-id) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 ontping (ontaddress) target (host) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 ping (ipaddress) datalength (bytes) count (count) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 927 range ont id ({ontserial | ontaddress}) pon (slot-port). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529 reset chassis ({sys-a | sys-b | all}) version ({version-id | current}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 reset chassis (linecards) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 reset ont (ontaddress) image ({0 | 1}) priority ({normal | override}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 reset ont (ontaddress) version ({version | current}) priority ({normal | override}) . . . . . . . . . . . . . . . . . . . . . 229 reset slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 restore database name (backupname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 786 restore database version (version-id) name (backupname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 787 set acl-ip (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 set acl-mac (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 set alarm entity (entity70) condtype (condtype70) sev ({sa | nsa}) level (alarmlevel). . . . . . . . . . . . . . . . . . . 429 set alarm ont-flapping-alarms flap-suppression-time (value) state ({active | inactive}) . . . . . . . . . . . . . . . . . 231 set chassis autonomous ({on | off}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434 set chassis bmc-rate (ratechassis) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 set chassis bulkstats ({enable | disable} ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 set chassis countrycode (country). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437 set chassis date (date) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 set chassis dhcp-guard ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 I COMPASS ID: 397450931 Ver 02 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 set chassis dhcp-relay ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 set chassis dot1x (enable | disable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 set chassis dst ({enable|disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442 set chassis forwarding-mode (mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443 set chassis installer name (value) email (address) phone (number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 set chassis lacp sysprio (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491 set chassis macage (seconds). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445 set chassis mcast-src-guard ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446 set chassis misc-input (number) ({enable | disable}) name (miscname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 set chassis name (chassis_name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447 set chassis ont-channelassignment ({manual | auto | registration}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448 set chassis ont-enet-loopdetection ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 set chassis ont-range ({autodisc | recovery | manual}) interval (interval) timeout (value) . . . . . . . . . . . . . . . 451 set chassis ont-snauthentication ({enable | disable}) trap-dest (ipaddress-snauth) . . . . . . . . . . . . . . . . . . . . . 453 set chassis out-of-band-mgt (oobmgtport) ip-address (ipaddress) mask (subnetmask) . . . . . . . . . . . . . . . . . 726 set chassis pppoe-ia ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455 set chassis pref-mgt-ip (inband | outofband) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456 set chassis sntp (ipaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457 set chassis sntpctl ({enable|disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458 set chassis syscontact (syscontact) email (address) phone (number) description (text) . . . . . . . . . . . . . . . . . 459 set chassis syslocation (syslocation). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460 set chassis tcont default-percent-gbw-fixed ({10-100}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 set chassis time (time) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461 set chassis tz (timezone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462 set chassis vendor ( FSANid) defaultversion ({disable | ONTversion}) onttype (ontg) . . . . . . . . . . . . . . . . . . 788 set chassis circuit-id format ({aid | tr-156 | cu | tt}) access-node-id mgmt-ip . . . . . . . . . . . . . . . . . . . . . . . . . . 411 set chassis circuit-id format ({aid | tr-156 | cu | tt}) access-node-id user-string (value) . . . . . . . . . . . . . . . . . 412 set chassis default gateway (ip-address). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 728 set chassis in-band-mgt ipaddr (ip) mask (subnetmask) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729 set chassis security-radius auth ({olt, radius-olt}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 749 set cli baud (baud-rate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473 set cli inact-timeout (minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474 set cli lines (lines-per-page). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475 set conn name (connection-name) ont (connendpointaid) olt (olt-address) state ({active | inactive}) eth-cfm (state) mepid (value) tx-td (traf-name) rx-td (traf-name) tcont (tcontid) . . . . . . . . . . . . . . . . . . . . . 15 set conn name (connection-name) state ({active | inactive}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 set conn olt (oltaddress) state ({active | inactive}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 COMPASS ID: 397450931 V INDEX-5 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 set conn ont (connendpointaid) state ({active | inactive}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 set debug sigtracelog vg-voice ({crv | timeslot}) state ({enable | disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 929 set eqptsw clear (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478 set eqptsw force to (slot). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479 set eqptsw lockout (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 set eqptsw manual to (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482 set eth-cfm config default-eth-cfm ({enable | disable}) intracarrier-mdlevel (mdlevel) default-intracarriermepid ({1-8191}) carrier-mdlevel (level) default-carrier-mepid ({1-8191}) priority ({0-7}) . . . . . . . . . . . . . 160 set eth-cfm mep olt (cfmport) intracarrier svid (svlanid) mepid (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 set holdpotsbias ({ontaddress | slot}) duration (timervalue). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 set ig (slot-igtype-index) name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 978 set ig-config (slot-gr303-index) secondary-ds1 (ds1aid) maxcrv (maxcrv) switch ({gtd5 | other}) . . . . . . . 980 set ig-config (slot-gr303-index) state ({active | inactive}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 982 set ig-sw (slot-gr303-index) type ({tmc-manual | tmc-force | eoc-manual | eoc-force}) . . . . . . . . . . . . . . . . 983 set ip route (dest-ipaddress) mask (subnetmask) next-hop (nei-ipaddress) cost (cost) . . . . . . . . . . . . . . . . . 731 set iptv chbwtable name (name) svid (svlanid) ipmaddrlow (value) ipmaddrhigh (value) cir (chcir) pir (chpir) ipsrcaddr (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 set lagroup (lagaddress) name (name) lacpmode ({disabled | active}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492 set lagroup-config (lagaddress) acl-ip (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 set lagroup-config (lagaddress) acl-mac (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 set lagroup-config (lagaddress) bmc-rate (ratewanlag) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 set lagroup-config (lagaddress) state ({enable | disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494 set loopback port ds1 (ds1aid) type ({line | payload}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567 set loopback port gige (slot-port) type (fe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 set mstp instance instid (id) priority (num) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511 set mstp olt (lag | gigeport) instid (id) pathcost (cost) portpriority (priority) . . . . . . . . . . . . . . . . . . . . . . . . . 512 set mstp protocol state (enable | disable) hello-time (seconds) forward-delay (seconds) maxage (seconds) txhold (count) maxhops (count) vendormode (std | cisco) . . . . . . . . . . . . . . . . . . . . . . . . 514 set mstp region name (cfgname) revision (number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516 set olt-qosconfig all-strict-priority ({enable | disable}) cos0weight ({0-100}) cos1weight ({0-100}) cos2weight ({0-100}) cos3weight ({0-100}) cos4weight ({0-100}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628 set ont id (ontaddress) dscpmap (dscpmapname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 set ont id (ontaddress) eh248config ont-eh248config (name) mgname (name) . . . . . . . . . . . . . . . . . . . . . . . 985 set ont id (ontaddress) misc-input (index) state ({enable | disable}) name (name) . . . . . . . . . . . . . . . . . . . . . 275 set ont id (ontaddress) name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 set ont id (ontaddress) ont-qosconfig (ontqosconfigname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 set ont id (ontaddress) optical ont-no-override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 I COMPASS ID: 397450931 Ver 02 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 set ont id (ontaddress) optical ont-override hiopticalinpwralarm (value) lowopticalinpwralarm (value) . . 279 set ont id (ontaddress) pbitremap (pbitremapname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 set ont id (ontaddress) profile (ontprofilename) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 set ont id (ontaddress) registration-id (regid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284 set ont id (ontaddress) sip-resubscribe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 702 set ont id (ontaddress) state (ontstate). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 set ont id (ontaddress) tcont (tcontid) autobw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 set ont id (ontaddress) tcont (tcontid) manualbw gbw (bw) maxbw (bw) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532 set ont id (ontaddress) tcont (tcontid) percent-gbw-fixed ({10-100}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534 set ont id (ontaddress) voiceusertype (service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 set ont id (ontaddress) voipconfig dhcp-ipaddr-mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703 set ont id (ontaddress) voipconfig ont-sipconfig (name) sipuser (usr) realm (domain) sippaswd (pwd) . . . 705 set ont id (ontaddress) voipconfig static-ipaddr-mode ipaddr (ip) submask (mask) defgw (gateway) primdns (ip) secdns (ip). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 707 set ont id (ontserial) channel ({1-64}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 set ont port dataport (ontdataaddress) pbit0 (etherlist) pbit1 (etherlist) pbit2 (etherlist) pbit3 (etherlist) pbit4 (etherlist) pbit5 (etherlist) pbit6 (etherlist) pbit7 (etherlist) . . . . . . . . . . . . . . . . . . . . . 295 set ont port dataport (ontdataaddress) l2config (l2configname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 set ont port enet (ontenetaddress) acl-ip (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 set ont port enet (ontenetaddress) acl-mac (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 set ont port enet (ontenetaddress) bmc-rate (rate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 set ont port enet (ontenetaddress) lldp-med-profile (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 578 set ont port enet (ontenetaddress) poeconfig profile (poeconfig profilename). . . . . . . . . . . . . . . . . . . . . . . . . 579 set ont port enet (ontenetaddress) profile (enetprofile) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 set ont port enet (ontenetaddress) state ({enable | disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 set ont port hcna (onthcnaaddress) acl-ip (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 set ont port hcna (onthcnaaddress) acl-mac (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 set ont port hcna (onthcnaaddress) bmc-rate (rate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304 set ont port hcna (onthcnaaddress) datastate ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306 set ont port hcna (onthcnaaddress) profile (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 set ont port moca (ontmocaaddress) pwrcontrol (mode) pwrlevel (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308 set ont port moca (ontmocaaddress) datastate ({enable | disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 set ont port moca (ontmocaaddress) profile (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 set ont port pon (ontponaddress) acl-ip (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 set ont port pon (ontponaddress) acl-mac (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 set ont port pots (ontpotsaddress) profile (potsprofile) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 set ont port pots (ontpotsaddress) sip-register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 923 COMPASS ID: 397450931 V INDEX-7 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 set ont port pots (ontpotsaddress) state ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 set ont port vdsl (ontvdsladdress) acl-ip (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 set ont port vdsl (ontvdsladdress) acl-mac (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 set ont port vdsl (ontvdsladdress) bandplan ab10m (value) ab12m (value) ab15m (value) ab17m (value) ab20m (value) ab30m (value) ab40m (value) ab80m (value) ab160m (value) adslb640 (value). . . . . . . . . . . . . . . . . 316 set ont port vdsl (ontvdsladdress) bmc-rate (rate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 set ont port vdsl (ontvdsladdress) channel down-maxrate (value) up-maxrate (value) down-maxintdelay (value) up-maxintdelay (value) down-minrate (value) up-minrate (value) down-inp (value) up-inp (value). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 set ont port vdsl (ontvdsladdress) line down-snrtarget (value) down-snrmin (value) up-snrtarget (value) up-snrmin (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 set ont port vdsl (ontvdsladdress) profile (vdslprofile) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 set ont port vdsl (ontvdsladdress) state ({enable | disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 set ont port video (ontvideoaddress) ont-no-override. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 set ont port video (ontvideoaddress) ont-override hivideoinpwralarm (value) lowvideoinpwralarm (value)330 set ont port video (ontvideoaddress) profile (videoprofile) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 set ont port video (ontvideoaddress) state ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334 set password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 set pon-protn (primaryponport) secondary-pon (secondaryponport). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535 set ponsw force (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536 set port ds1 (ds1aid) framing ({esf | sf}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614 set port ds1 (ds1aid) linecoding ({b8zs | ami}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615 set port ds1 (slot-port) cablelength (feet-val) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 616 set port gige (gigeport) bmc-rate (ratewanport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 set port gige (slot-port) lacptimeout (value) lacpportprio (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495 set port gige (slot-port) acl-ip (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 set port gige (slot-port) acl-mac (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 set port gige (slot-port) stag-ethtype ({0x88a8 | 0x8100 | 0x9100 | 0x9200 | 0x8200 | 0x8500}) . . . . . . . . . . 617 set port gige (slot-port) state ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 618 set port gige-oam (slot-port) mode ({active | passive}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 set port gige-oam (slot-port) state ({enable | disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 set port gige-oam (slot-port) tca-type (oamtcatype) window (efwindow) threshold (efthreshold) . . . . . . . 146 set port gige-oam (slot-port) tca-type (oamtcatype) state ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . 148 set port pon (slot-port) pbit0rate (value) pbit1rate (value) pbit2rate (value) pbit3rate (value) pbit4rate (value) pbit5rate (value) pbit6rate (value) pbit7rate (value). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537 set port pon (slot-port) acl-ip (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 set port pon (slot-port) acl-mac (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 set port pon (slot-port) bmc-rate (bmcrate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 INDEX COMPASS ID: 397450931 Ver 02 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 set port pon (slot-port) clear-estop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539 set port pon (slot-port) optical hiopticalinpwralarm (value) lowopticalinpwralarm (value) . . . . . . . . . . . . . 540 set port pon (slot-port) state ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541 set port pon (slot-port) video hivideoinpwralarm (value) lowvideoinpwralarm (value). . . . . . . . . . . . . . . . . 542 set potschannel eh248 ont (potsport) state ({active | inactive}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 987 set potschannel vg-voice ({crv | timeslot}) state ({active | inactive}) transpath (value) . . . . . . . . . . . . . . . . . . 988 set profile dscpmap default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 630 set profile dscpmap name (dscpmapname) pbit0 (dscplist) pbit1 (dscplist) pbit2 (dscplist) pbit3 (dscplist) pbit4 (dscplist) pbit5 (dscplist) pbit6 (dscplist) pbit7 (dscplist) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631 set profile enetport default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 580 set profile enetport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dot1x (enable | disable) autodetect (autodetect) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 581 set profile hcnaport default-name (name) set profile hcnaport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dot1x (enable | disable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 584 set profile iptv default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 set profile iptv name (name) maxch (value) maxbw (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 set profile l2config default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 set profile l2config name (l2configname) acceptframetypes (frametype) dscpmap (state) pbitremap (state) trustpbit (value) fixedprio ({0-7}) tls ({yes | no}) maxmac (value). . . . . . . . . . . . . . . . . . . . 421 set profile lldp-med default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 set profile lldp-med name (name) state (enabled | disabled) voip-bear-tag (tagged | untagged) voip-sig-tag (tagged | untagged) voip-bear-vid (vid) voip-sig-vid (vid) voip-bear-pbit (value) voip-sig-pbit (value) voip-bear-dscp (value) voip-sig-dscp (value) txinterval (timer). . . . . . . . . . . . . . . . . . . 337 set profile mocaport default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 586 set profile mocaport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) privacy ((enable | disable)) password (pwd) dot1x (enable | disable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587 set profile ont-eh248config msg (format) trans-hist (timer) term-id-base (id) srv-change (delay) send (delay) max-wait (delay) init-retrans (to) min-retrans (to) max-retrans (to) retr-window (win) . . . . . . . . . . . . . . . . 991 set profile ont-eh248config default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 994 set profile ont-eh248config name (name) prim-mgc (host) prim-mgc-p (port) prim-mgc-name (name) sec-mgc (host) sec-mgc-p (port) sec-mgc-name (name) h248vers (num) ssw (type) mgsvcprof (label) mgsvcprofvers (vers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 995 set profile ont-profile forwarding-mode (fwdmode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 set profile ont-profile default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 set profile ont-profile name (name) voice (voicemode) enetdelay (value) mocadelay (value) vdsl2delay (value) hcnadelay (value) rfvideodelay (value) rbholdpotsbias (value) macage (seconds) dosprotect ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 set profile ont-qosconfig all-strict-priority ({enable | disable}) cos0weight ({0-100}) cos1weight ({0-100}) cos2weight ({0-100}) ratelimit ({enable | disable}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 COMPASS ID: 397450931 INDEX-9 AXS-SERIES CLI REFERENCE GUIDE APRIL 30, 2012 set profile ont-qosconfig voip-sig-pbit (value) voip-bear-pbit (value) voip-sig-dscp (value) voip-bear-dscp (value) igmp-pbit (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 set profile ont-qosconfig default-name (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 set profile ont-qosconfig name (ontqosconfigname) mappbit0cos ({0-3}) mappbit1cos ({0-3}) mappbit2cos ({0-3}) mappbit3cos ({0-3}) mappbit4cos ({0-3}) mappbit5cos ({0-3}) mappbit6cos ({0-3}) mappbit7cos ({0-3}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 set profile ont-sipconfig default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 716 set profile ont-sipconfig name (name) configproxy (ip | fqdn) ontdomain (domain) abandcalls (threshold) pktlossfrac (threshold) rtcppktfail (threshold) rtpjitter (threshold) sipmsgto (threshold). . . . . . . . . . . . . . . 717 set profile pbitremap default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 633 set profile pbitremap name (pbitremapname) inpbit0 (pbitvalue) inpbit1 (pbitvalue) inpbit2 (pbitvalue) inpbit3 (pbitvalue) inpbit4 (pbitvalue) inpbit5 (pbitvalue) inpbit6 (pbitvalue) inpbit7 (pbitvalue) . . . . . . . 634 set profile poeconfig default-name (poeconfigname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 589 set profile poeconfig name (poeconfigname) state ({enable | disable}) maxpower ({0.2 - 30.0}) . . . . . . . . . 590 set profile potsport default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 592 set profile potsport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dropphy (value) nogrant (value) txgain (value) rxgain (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 593 set profile vdslport default-name (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 595 set profile vdslport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dot1x (enable | disable). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 596 set profile videoport default-name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 598 set profile videoport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) agcoffset (value) analogch (value) digitalch (value) shutdown_tmr (value). . . . . . . . . . . . . . . . . . . . . . . . . . . 599 set security pwdaging (interval) warnint (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 751 set security login maxretry (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 752 set security-ipsec peer-ip (ip-address) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 772 set security-ipsec state ({enable | disable}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 773 set security-ipsec load cert ({file}) passphrase ({passphrase}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 774 set security-radius svid (svlanid) olt (oltwanaid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 739 set security-radius cli-srvr primip (ipaddress) primport (value) secip (ipaddress) secport (value) key (secretkey) conthresh (integer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 754 set security-radius config clientip (ipaddress) gateway (ipaddress) srvrprimport (value) srvrprimip (ipaddress) srvrsecip (ipaddress) conthresh (integer) srvrsecport (value) key (secretkey) clientmask (subnetmask) . . 740 set slot (slot) slotname (name) modulename (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 644 set snmp trap-dest (ipaddress) udpport (udpport). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 733 set snmp community (communityname) access ({ro | rw}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 734 set tca name (tcaname) mode ({rising | falling}) threshold (threshold) state ({active | inactive}) . . . . . . . . . 883 set timing mode external . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 887 set timing mode freerun. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888 INDEX-10 COMPASS ID:397450931 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 set timing mode loop to pri (slot-port) sec (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 889 set timing mode switch to ({holdover | clearholdover}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 891 set timing port ({bits-a | bits-b | all}) linecoding ({b8zs | ami}) framing ({esf | sf}) cablelength (feet-val-timing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 892 set timing refsw mode ({revertive | nonrevertive} ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 894 set timing refsw to ({bits-a | bits-b}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 895 set timing refsw to ({pri | sec}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 896 set traffic table name (traf-name) (pkt) pir (pir_vlan) cir (cir_vlan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 906 set user name (username) ({lock | unlock}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 756 set user name (username) login maxretry (value) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757 set user name (username) password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 set user name (username) privilege (privilege-level). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 set user name (username) pwdaging (interval) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 762 set video-rpd dest-ipaddr (ip_address) udpport (udpport) freq (frequency) threshold-apps ({10-1000}) threshold-mpps ({10-1000}) next-hop (ipaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 949 set video-rpd state ({active | inactive}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 952 set vlan svid (svlanid) name (vlanname) vlantype ({double-tag | single-tag | mcast}) mcast-down-bw (value) description (text) forwarding-mode (fwdmode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 set vlan-mcast svid (svlanid) disable-loch-alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 set vlan-mcast svid (svlanid) enable-loch-alarm alarm-threshold ((5 - 65535)). . . . . . . . . . . . . . . . . . . . . . . . 187 set vlan-mcast svid (svlanid) mode ({snooping | proxy-reporting}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 show acl-ip name (list). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 show acl-mac name (list). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 show alarm-config entity (entity70). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464 show alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 931 show alarms-env . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933 show capacity lagroup (lagid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 796 show capacity slot (slot). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 798 show capacity vlan name (vlanname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 805 show capacity vlan svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 808 show chassis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468 show cli. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476 show cond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 935 show conn all intfc ({ slot | slot-port | ontaddress | lag}) report ({short | long} ) . . . . . . . . . . . . . . . . . . . . . . . 36 show conn name (connection-name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 show conn olt (oltaddresswn1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 show conn ont (connendpointaid). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 COMPASS ID: 397450931 INDEX-11 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 show database backup current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 790 show database backup version (version-id). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791 show database status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 792 show debug sigtracelog summary slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 937 show debug sigtracelog vg-voice ({crv | timeslot}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 938 show eqpt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 show eqpt-detail ({slot | fan}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 show eqptsw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484 show eth-cfm config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 show eth-cfm mep olt (cfmport) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 show eth-cfm mep ont (ontaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 show eth-cfm mip olt svid (svlanid) cvid (cvlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 show holdpotsbias ({all | ontaddress | slot}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 show ig index (slot-igtype-index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 998 show ig gr303summary slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001 show ig tr08summary slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1002 show igmp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 show ip route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735 show iptv chbwtable svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 show lacp gige (slot-port). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497 show lagroup (lagaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499 show lagroup all. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 show log alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 940 show log cli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 942 show log cond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 943 show log sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 945 show loopback port ({slot | slot-port | all}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 569 show mac-table ont (enetorponport) vlan (ontvlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 show mac-table port (wanorponport) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 show misc-inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 show mstp instance instid (id). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517 show mstp port ((all | lag | gigeport)). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520 show mstp protocol detail (summary | verbose). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523 show nvm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 show olt-qosconfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 636 show ont iptv (ontaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 INDEX-12 COMPASS ID: 397450931 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 show ont registration-id (regid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 show ont chassis (ontaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 show ont dhcp-binding (ontaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 show ont eh248 (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1003 show ont eqpt (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 show ont eqpt-detail (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 show ont igmp (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 show ont lldp ont (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 show ont pon (ontponaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 show ont port (ontportaddr) detail (summary | verbose) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341 show ont portsummary (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 show ont voip (ontaddress) detail (summary | verbose). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 709 show ontinstallsw ({ontaddress | ponaddress}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 793 show pon (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543 show pon-power (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 show pon-protn slot ({slot | all}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 546 show pon-unassigned (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548 show port ds1 ({slot-port | slot}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 619 show port gige (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621 show port gige-detail (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 623 show port gige-oam (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 show port vg-ds1 (ds1aid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1006 show potschannel conn (connection-name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1009 show potschannel eh248 ont (potsport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1012 show potschannel ig (slot-igtype-index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1014 show potschannel ont (potsport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1016 show potschannel slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1018 show potschannel t1cas (ds1aid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1020 show potschannel vg-voice ({crv | timeslot}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1022 show profile (all). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 show profile dscpmap name (dscpmapname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637 show profile enetport name (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601 show profile hcnaport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603 show profile iptv name (name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 show profile l2config name (l2configname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 show profile lldp-med name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 COMPASS ID: 397450931 INDEX-13 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 show profile mocaport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 604 show profile ont-eh248config name (pname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1024 show profile ont-profile name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 show profile ont-qosconfig name (ontqosconfigname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 639 show profile ont-sipconfig name (pname). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271 show profile pbitremap name (pbitremapname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641 show profile poeconfig name (poeconfigname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605 show profile potsport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607 show profile vdslport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609 show profile videoport name (name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611 show security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 763 show security-ipsec {verbose} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 776 show security-radius cli-srvr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 764 show security-radius dot1x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743 show sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 766 show slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 show snmp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 736 show stats conn (connection-name). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 812 show stats ds1 (slot-port) type ({ne | fe}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 821 show stats gige (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824 show stats ig (slot-gr303-index) channel ({tmc-pri | tmc-sec | eoc-pri | eoc-sec}) . . . . . . . . . . . . . . . . . . . . . 865 show stats igmp pon (slot-port) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 show stats iptv pon (slot-port) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 show stats lagroup (lagid). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 828 show stats mep olt (cfmport) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 show stats mep ontport (ontdataaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 show stats out-of-band-mgt (oobmgtport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 830 show stats pon (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 833 show stats pondetail (pon-port | ont-address) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 835 show stats slot (slot) svid (svlanid) cvid (cvlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 837 show stats svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 839 show stats switch (sw-slot) slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 840 show stats switch (sw-slot) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 842 show stats vg slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 867 show stats vg-voice ({crv | timeslot}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869 show stats video-rpd (slot). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 844 INDEX-14 COMPASS ID: 397450931 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 show stats acl gige (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846 show stats acl lagroup (lagid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848 show stats acl pon (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850 show stats acl ont pon (ontponaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 852 show stats acl ont port (ontdataaclport) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 854 show stats in-band-mgt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 857 show stats ont dhcp-ra ({ontportaddress | ontaddress}) svid (svlanid) cvid (cvlanid) . . . . . . . . . . . . . . . . . . . 116 show stats ont dot1x (ontdataaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 857 show stats ont eh248 (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026 show stats ont flapping-alarms (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 861 show stats ont igmp (ontdataaddress) bin ({current | history}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 show stats ont iptv (ontdataaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 show stats ont poe (ontaddress) bin ({current | history}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291 show stats ont pon (ontponaddress) bin ({current | history}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378 show stats ont port (ontportaddr) bin ({current | history}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381 show stats ont pppoe-ia ({ontdataaddress | ontaddress}) svid (svlanid) cvid (cvlanid) . . . . . . . . . . . . . . . . . . 413 show stats ont sip (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396 show t1cassummary slot (slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1028 show tca name (tcaname) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 884 show tcont ont (ontaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 show tcont pon (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557 show tcont-detail ont (ontaddress) tcont (tcontid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 562 show testresult gige-loopback (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 show testresult loop (ontpotsaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 show testresult pon (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874 show testresult sip-dialtone (ontpotsaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 show timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 897 show traffic table name (traf-name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 show user name ({username | all}). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 768 show vg slot (slot) report ({short | long} ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1029 show video-rpd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953 show vlan name (vlanname) report ({ short | long }) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 show vlan svid (svlanid) report ({ short | long }) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 show vlan-member olt (oltwanaid) svid (svlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 682 show vlan-member ont (ontportaddr) svid (svlanid) cvid (cvlanid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 686 show vlans olt ({all | slot | slot-port | lagroup}) type ({all | single-tag | double-tag | mcast}). . . . . . . . . . . . . . 695 COMPASS ID: 397450931 INDEX-15 AXS-SERIES CLI REFERENCE GUIDE APRIL 25, 2012 show vlans ont ({ all | ponslot | ponport | ontaddress } ) type ({all | single-tag | double-tag | mcast}) . . . . . 698 test avalarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878 test borscht (ontpotsaddress). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402 test dialtone (ontpotsaddress) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 test gige-loopback (slot-port) numpackets (value) sizepackets (size) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 test leds ({ slot | all}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 879 test loop (ontpotsaddress) priority ({normal | override}) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 test pon (slot-port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880 test sip-dialtone (ontpotsaddress) phone (number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 INDEX-16 COMPASS ID: 397450931 MOTOROLA AXS2200 OLT R7.4 CLI Reference Guide 3/27/2012 10:27:32AM MOTOROLA CLI General CLI General ! (n) Description Enters a previous command that was performed in the user's session. To view a report of the command history by index, issue the history command. User Privilege Level: Operator Required Parameters: n The index of the prior CLI command in the history report. Default Values none Confirmation Message none Example(s) Example 1: (the tenth index command was show eqpt-detail au-3, in the history report) AXS2200> ! 10 AXS2200> show eqpt-detail au-3 =============================================================================== EQUIPMENT DETAIL REPORT DATE: 07/13/2005 TIME: 16:08:22 =============================================================================== Slot: au-3 Card: AGPONC Part Number: 532698-001-00 BOM Rev: AA SW Ver: vx.y.z Serial Number: A04NG10011600839 CLEI: BVL290KAAA BootROM Ver: 1 CPLD1 Ver: 1 CPLD2 Ver: 1 CPLD3 Ver: n/a Oper Status: good Removable Optics: No =============================================================================== Command completed successfully Error Codes Command failed Page 1 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA CLI General !! Description Executes the last CLI command entered for the user's session. To view previous commands, type history. User Privilege Level: Operator Default Values none Confirmation Message none Example(s) Example 1: (show eqpt was the last command entered by the user) AXS2200> !! AXS2200> show eqpt =============================================================================== EQUIPMENT Report DATE: 7/13/2007 TIME: 20:15:40 =============================================================================== Slot Card Part BOM Serial CLEI SW Status Type Number Rev Number Ver ----- ---------- ------------- --- ---------------- ---------- ------ -------au-1 AVGC 520702-001-00 AA A04NG10011601011 1234567890 vx.y.z good au-2 AVGC 520702-001-00 AA A04NG10011601720 1234567890 vx.y.z good au-3 empty au-4 empty au-5 AGPONC 521869-001-00 AA A04NG10011600839 1234567890 vx.y.z good au-6 AGPONC 521869-001-00 AA A04NG10011600840 1234567890 vx.y.z good au-7 AGPONC 521869-001-00 AA A04NG10011600841 1234567890 vx.y.z removed au-8 AGPONC 521869-001-00 AA A04NG10011600840 1234567890 vx.y.z good au-9 AGPONC 521869-001-00 AA A04NG10011600840 1234567890 vx.y.z good sw-a ASW200D 521880-001-00 AA A04NG10011600834 1234567890 vx.y.z good sw-b ASW200D 521880-001-00 AA A04NG10011600837 1234567890 vx.y.z good au-10 AGPONC 521869-001-00 AA A04NG10011600833 1234567890 vx.y.z good au-11 AGPONC 521869-001-00 AA A04NG10011600833 1234567890 vx.y.z good au-12 AGPONC 521869-001-00 AA A04NG10011600833 1234567890 vx.y.z good au-13 AGPONC 521869-001-00 AA A04NG10011600832 1234567890 vx.y.z good au-14 AGPONC 521869-001-00 AA A04NG10011600833 1234567890 vx.y.z good au-15 AGPONC 521869-001-00 AA A04NG10011600839 1234567890 vx.y.z good au-16 AGPONC 521869-001-00 AA A04NG10011600840 1234567890 vx.y.z good au-17 empty au-18 empty sys-a ASYSA 521865-001-00 AA A04NG10011600842 1234567890 vx.y.z good sys-b empty bp 01 =============================================================================== Command completed successfully Error Codes Command failed Page 2 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA CLI General history Description Displays the command history for the user's CLI session. To execute the last command, type !!. To execute a previous command by index number, type !n, where n is the index number. User Privilege Level: Operator Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> history ============================================================================== COMMAND HISTORY DATE: 08/19/2005 TIME: 09:18:57 ============================================================================== 1 2 3 acceptsw show eqpt-detail au-3 show conn all ============================================================================== Command completed successfully Error Codes Page 3 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 4 CLI General AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections Connections modify conn (connection-name) tx-td (traf-name) rx-td (traf-name) eth-cfm (state) mepid (value) Description Modifies settings for a connection. In the case where one or both Traffic Descriptors for a connection are changed, the system will make the change and bring the new connection up. In case of a failure, the connection will revert to the previous set of traffic descriptors in order to avoid service outage. T-CONT bandwidth settings on the PON are automatically adjusted based on the upstream traffic descriptors and the setting for the fixed percentage of the Guaranteed Bandwidth for the T-CONT. Ethernet CFM can be enabled or disabled for a connection. The MEP ID can only be set if Ethernet CFM is being enabled, otherwise the operation will be denied. - If enabled, the carrier MD level MEP will be created on the ONT port and the MIP created on the OLT. - If disabled, the Carrier level MEP and MIP will be deleted. User Privilege Level: Superuser Required Parameters: connection-name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Optional Parameters: state eth-cfm Sets the Ethernet CFM admin state. Valid values are: - enable - disable value mepid Sets the MEP ID used for Ethernet CFM. Valid values are: {1-8191}. traf-name tx-td Specifies the traffic table entry whose characteristics are used in the transmit direction of the connection. The transmit direction is defined as the direction from the first endpoint to the second endpoint. traf-name rx-td Specifies the traffic table entry whose characteristics are used in the receive direction of the connection. The receive direction is defined as the direction from the second endpoint to the first endpoint. Default Values Page 5 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections if eth-cfm is enabled, then mepid will default to default-carrier-mepid if not provided in the command. Confirmation Message This will affect services on the connection. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: (modifies traffic descriptors only) AXS2200> modify conn myconnection tx-td GoldTxTD rx-td GoldRxTD This will affect services on the connection. Do you want to continue? y|n >y Command completed successfully Example 2: (enable Ethernet CFM) AXS2200> modify conn myconnection eth-cfm enable mepid 200 This will affect services on the connection. Do you want to continue? y|n >y Command completed successfully Example 4: (disable Ethernet CFM) AXS2200> modify conn myconnection eth-cfm disable This will affect services on the connection. Do you want to continue? y|n >y Command completed successfully Error Codes MEPID cannot be changed for existing MEP (disable then re-enable eth-cfm) Bandwidth exceeds ONT capacity At least one attribute is required to be set Connection does not exist traf-name not found Bandwidth exceeds port capacity Bandwidth unavailable at endpoint-1 Bandwidth unavailable at endpoint-2 Invalid traf-name PON bandwidth unavailable MEPID can only be set when Ethernet CFM is enabled Ethernet CFM not available for H.248/POTS connections VLAN - SVID in use - cannot be used for point to point connection Page 6 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections modify conn (connection-name) tcont (tcontid) Description Modifies T-CONT settings for a connection. The ONT and OLT GPON card must support the multiple T-CONT feature to use T-CONTs 2-n. T-CONT bandwidth settings on the PON are automatically adjusted based on the upstream traffic descriptors and the setting for the fixed percentage of the Guaranteed Bandwidth for the T-CONT. The service may be temporarily affected while the change is applied. User Privilege Level: Superuser Required Parameters: tcontid tcont Indicates the T-CONT ID in the range {1-n}. connection-name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Default Values none Confirmation Message This will affect services on the connection. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> modify conn alpha tcont 2 This will affect services on the connection. Do you want to continue? y|n >y Command completed successfully Error Codes TCONT 1 must be used for this ONT Connection does not exist Invalid TCONT ID PON bandwidth unavailable Page 7 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 8 Connections AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Modify State Connections - Modify State set conn name (connection-name) state ({active | inactive}) Description Used to activate or deactivate a pre-defined connection by name. User Privilege Level: Superuser Required Parameters: connection-name name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. {active | inactive} state Sets the state to active or inactive. Default Values none Confirmation Message You have elected to activate or deactivate a connection. Service will be affected. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set conn name alpha state active You have elected to activate or deactivate a connection. Do you want to proceed? y | n >y Service will be affected. Command completed successfully Error Codes Connection does not exist Connection already in requested state Invalid connection type Page 9 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Modify State set conn olt (oltaddress) state ({active | inactive}) Description Used to activate or deactivate a pre-defined connection by identifying a connection endpoint on the OLT. User Privilege Level: Superuser Required Parameters: olt oltaddress Indicates the interface address on the OLT system. The format is different depending on the type of interface: - slot-vg-index for a tdm-h248 connection endpoint on an AVGC Voice Gateway card (i.e. whose potschannels are destined to GR-303, T1CAS and/or TR-08 interface). Index takes a range of 1-4000 (e.g. au-1-vg-15) - slot-port-svid-cvid for a double-tagged VLAN connection endpoint on a card that terminates GigE interfaces. svid and cvid are the values of the Service and Customer VLAN Identifiers. svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, vdsl2) 2012-2075 for voip conn (e.g. sw-a-4-30-2012) - lag-group-svid-cvid for a double-tagged VLAN connection endpoint on a link aggregation group. The group is the link aggregation group and takes a value from 1-128. svid and cvid are the values of the Service and Customer svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, vdsl2) 2012-2075 for voip conn (e.g. lag-1-30-24 for data conn) state {active | inactive} Sets the state to active or inactive. Default Values none Confirmation Message You have elected to activate or deactivate a connection. Service will be affected. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: Page 10 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Modify State (Voice Gateway tdm-h248 connection) AXS2200> set conn olt au-1-vg-100 state inactive You have elected to activate or deactivate a connection. Do you want to proceed? y | n >y Service will be affected. Command completed successfully Example 2: (GigE WAN) AXS2200> set conn olt sw-a-4-20-12 state inactive You have elected to activate or deactivate a connection. Do you want to proceed? y | n >y Service will be affected. Command completed successfully Example 3: (GigE port on Ethernet card) AXS2200> set conn olt au-11-4-20-12 state inactive You have elected to activate or deactivate a connection. Do you want to proceed? y | n >y Service will be affected. Command completed successfully Error Codes Invalid for a port on the protn slot of a 1+1 APS group - use working slot Connection already in requested state Connection not defined Invalid OLT connection endpoint Page 11 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Modify State set conn ont (connendpointaid) state ({active | inactive}) Description Used to activate or deactivate a pre-defined connection by identifying a connection endpoint on the ONT. User Privilege Level: Superuser Required Parameters: state {active | inactive} Sets the state to active or inactive. ont connendpointaid Specifies the ONT connection endpoint address. It takes one of the following formats, depending on the connection endpoint type: For Ethernet, MoCA, or VDSL2 ports on integrated ONTs: - oltslot-port-channel-ontporttype-index (e.g. au-5-1-1-enet-1, au-5-1-1-moca-1) For a tdm-h248 connection to all POTs ports on integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-pots) For a VOIP connection to all POTs ports on the integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-voip) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - ontporttype (pots, enet, moca, voip, vdsl2) - index (1-n) Default Values none Confirmation Message You have elected to activate or deactivate a connection. Service will be affected. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: (POTS connection) AXS2200> set conn ont au-3-1-16-pots state inactive You have elected to activate or deactivate a connection. Do you want to proceed? y | n >y Service will be affected. Command completed successfully Page 12 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Modify State Error Codes Invalid ONT connection endpoint Connection does not exist Connection already in requested state Invalid connection type Page 13 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 14 Connections - Modify State AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Adding New Connections - Adding New set conn name (connection-name) ont (connendpointaid) olt (olt-address) state ({active | inactive}) eth-cfm (state) mepid (value) tx-td (traf-name) rx-td (traf-name) tcont (tcontid) Description Defines a new connection from a connection endpoint on an ONT to the OLT. ONT endpoints are either - the physical port for Ethernet, MoCA, HCNA and VDSL2 services - or connection termination point for VoIP or POTS traffic. The system will automatically use default parameters for traffic descriptors and profiles based on the combination of connection endpoints and the type of ONT. If necessary, alternate traffic descriptors and profiles may be selected for connections. If alternate ones are used, be sure they are valid for the endpoints, or traffic may be adversely affected. Some ONT models support multiple T-CONTs. Connections to these ONTs are capable of being assigned to a specific T-CONT. T-CONT bandwidth settings on the PON are automatically adjusted based on the upstream traffic descriptors and the setting for the fixed percentage of the Guaranteed Bandwidth for the T-CONT. A listing of the defaults per Endpoint Type (EType) is shown below: ONT Profile Profile EType* OLT EType tx-td rx-td Table ** Name** ----- ----------- ---------------- ---------------- --------- -----------pots* vgw pkt_pots2 pkt_pots2 pktconn qbdef pots* vgw pkt_pots8 pkt_pots8 pktconn qbdef pots* vgw pkt_pots16 pkt_pots16 pktconn qbdef pots* vgw pkt_pots24 pkt_pots24 pktconn qbdef voip* gige or lag pkt_voip2 pkt_voip2 pktconn qbdef voip* gige or lag pkt_voip8 pkt_voip8 pktconn qbdef voip* gige or lag pkt_voip16 pkt_voip16 pktconn qbdef voip* gige or lag pkt_voip24 pkt_voip24 pktconn qbdef enet gige or lag pkt_fttpdata pkt_fttpdata pktconn qbdef moca gige or lag pkt_fttpdata pkt_fttpdata pktconn qbdef hcna gige or lag pkt_fttpdata pkt_fttpdata pktconn qbdef vdsl2 gige or lag pkt_fttpdata pkt_fttpdata pktconn qbdef * The default traffic descriptor will be selected by the system based on the ONT type. Specifically: The connection in the tdm-h248 mode (i.e. -pots) on the ONT1000GT will get pkt_pots2, ONT1400GT will get pkt_pots2, SF24210 will get pkt_pots2, SF24200 will get pkt_pots2, ONT1500GT will get pkt_pots8, ONT6000GxT will get pkt_pots24 MD2660x will get pkt_pots24 MD24400 will get pkt_pots16 MD22200 will get pkt_pots8 The connection in the VoIP mode (i.e. -voip) on the ONT1000GT will get pkt_voip2, ONT1400GT will get pkt_voip2, Page 15 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Adding New Sf24210 will get pkt_voip2, Sf24200 will get pkt_voip2, ONT1500GT will get pkt_voip8, ONT6000GxT will get pkt_voip24 MD2660x will get pkt_voip24, MD24400 will get pkt_voip16, MD22200 will get pkt_voip8, The settings in the default traffic descriptors can be viewed via "show traffic table". Note: If traffic descriptors are being set, both transmit and receive directions must be provided. If only one of the two is provided, the command is rejected with an error message. For connections to OLT GigE WAN ports, the combination of S-VID and C-VID must be unique for the OLT. Note that connections from a GPON ONT are only supported to a GigE WAN port, link aggregation group or AVGC Voice Gateway card. If Ethernet CFM per IEEE 802.1ag/ITU-T Y.1731 is enabled, then a Maintenance Endpoint (MEP) will be automatically created on the ONT, and a Maintenance Intermediate Point (MIP) will be automatically created on the OLT for the carrier Maintenance Domain (MD) to support the connection. Note that any MEPs for the IntraCarrier MD are defined explicitly by the user command "set eth-cfm mep olt". Note: For the ONT1100GE and ONT1500GT, if the "trustpbit" = yes in the profile, and there is a TLS connection, then the command is denied. User Privilege Level: Superuser Required Parameters: state {active | inactive} Sets the state to active or inactive. ont connendpointaid Specifies the ONT connection endpoint address. It takes one of the following formats, depending on the connection endpoint type: For Ethernet, MoCA, or VDSL2 ports on integrated ONTs: - oltslot-port-channel-ontporttype-index (e.g. au-5-1-1-enet-1, au-5-1-1-moca-1) For a tdm-h248 connection to all POTs ports on integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-pots) For a VOIP connection to all POTs ports on the integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-voip) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - ontporttype (pots, enet, moca, voip, vdsl2) - index (1-n) Page 16 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Adding New olt olt-address Indicates the interface address on the OLT system. The format is different depending on the type of interface: - slot-vg-index for a tdm-h248 connection endpoint on an AVGC Voice Gateway card (i.e. whose potschannels are destined to GR-303, T1CAS and/or TR-08 interface). Index takes a range of 1-4096 (e.g. au-1-vg-15) - slot-port-svid-cvid for a double-tagged VLAN connection endpoint on a card that terminates GigE interfaces. svid and cvid are the values of the Service and Customer VLAN Identifiers. svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, hcna, vdsl2) 2012-2075 for voip conn (e.g. sw-a-4-30-2012) - lag-group-svid-cvid for a double-tagged VLAN connection endpoint on a link aggregation group. The group is the link aggregation group and takes a value from 1-128. svid and cvid are the values of the Service and Customer svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, hcna, vdsl2) 2012-2075 for voip conn (e.g. lag-1-30-24 for data conn) connection-name name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Optional Parameters: state eth-cfm Sets the Ethernet CFM admin state. Valid values are: - enable - disable tx-td traf-name Specifies the traffic table entry whose characteristics are used in the transmit direction of the connection. The transmit direction is defined as the direction from the first endpoint to the second endpoint. rx-td traf-name Specifies the traffic table entry whose characteristics are used in the receive direction of the connection. The receive direction is defined as the direction from the second endpoint to the first endpoint. tcont tcontid Indicates the T-CONT ID in the range {1-n}. Page 17 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA mepid Connections - Adding New value Sets the MEP ID used for Ethernet CFM. Valid values are: {1-8191}. Default Values eth-cfm = default-eth-cfm mepid = default-carrier-mepid tcont = 1 Confirmation Message Command completed successfully Example(s) Example 1: (GPON ONT POTS to OLT AVGC Voice Gateway Card, using default TDs and connection profile, and default Ethernet CFM and TCONT) AXS2200> set conn name vgwconn ont au-5-1-16-pots olt au-1-vg-100 state active Command completed successfully Example 2: (ONT Enet to OLT GigE, using default traffic descriptors, and enabling Ethernet CFM, and setting the MEP ID for the Carrier MD Level, and setting the TCONT) AXS2200> set conn name dataconn ont au-5-1-16-enet-1 olt sw-a-4-20-14 state active eth-cfm enable mepid 300 tcont 2 Command completed successfully Example 3: (ONT VoIP to OLT GigE, using default traffic descriptors, svid = OLT 20, cvid = 2012, enable Ethernet CFM, specify tcont) AXS2200> set conn name voipconn ont au-5-1-16-voip olt sw-a-4-20-2012 state active eth-cfm enable tcont 1 Command completed successfully Example 4: (link aggregation group, using default eth-cfm and default tcont) AXS2200> set conn name lagdataconn ont au-5-1-1-enet-1 olt lag-10-16-12 state active tx-td silverdown rx-td silverup Command completed successfully Example 5: (TLS ONT Enet to OLT GigE, using default traffic descriptors, and disabling Ethernet CFM, and specifying tcont) AXS2200> set conn name dataconn ont au-5-1-16-enet-1 olt sw-a-4-20-14 state active eth-cfm disable tcont 2 Command completed successfully Example 6: (ONT Enet to OLT GigE on Ethernet Card, using default traffic descriptors) AXS2200> set conn name dataconn ont au-5-1-16-enet-1 olt au-11-4-20-14 state active Command completed successfully Page 18 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Adding New Error Codes TCONT 1 must be used for this ONT VLAN - Invalid profile, can't trustpbits on TLS connection on this ONT Invalid port S-VID must be unique per PON port Bandwidth exceeds ONT capacity connection already exists invalid- SWITCH unavailable Invalid traf-name invalid-define connections to the working slot of a 1+1 protected group Name already in use Invalid ONT connection endpoint Invalid OLT connection endpoint PON bandwidth unavailable Incomplete command entered Max number of connections per port reached Max number of connections per system reached Invalid connection endpoint combination Bandwidth exceeds port capacity Invalid TCONT ID Max number of VLAN connections per system reached Invalid cvid Invalid svid Only one connection to either the MoCA port or Enet port is allowed C-VID and S-VID combination already in use on OLT Bandwidth unavailable at endpoint-1 Bandwidth unavailable at endpoint-2 MEPID can only be set when Ethernet CFM is enabled Ethernet CFM not available for H.248/POTS connections Max number of tdm-h248 connections reached (per Voice Gateway card) VLAN - SVID in use - cannot be used for point to point connection VOIP is configured on ONT VOIP is not configured or supported on ONT Insufficient connection bandwidth Page 19 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Adding New set vlan svid (svlanid) name (vlanname) vlantype ({double-tag | single-tag | mcast}) mcast-down-bw (value) description (text) forwarding-mode (fwdmode) Description Defines the Point to Multipoint VLAN on the OLT. Use the "add vlan-member" commands to associate OLT members and ONT members. For double tagged VLANs, configuration of ONT members will require the specification of the desired C-VLAN ID (cvid). The Point to Multipoint VLAN is identified by a user defined index number, which corresponds to the S-TAG, and must be unique within the chassis. This connection is not intended for MAC multicast. Any MAC multicast packets will be sent to a broadcast PortID. If the vlantype is mcast, the command may optionally specify a downstream bandwidth reserved for PON ports. User Privilege Level: Superuser Required Parameters: svlanid svid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. vlanname name Identifies the name of the VLAN. Can take up to 32 characters in length. Optional Parameters: vlantype mcast} {double-tag | single-tag | Describes the type of VLAN: - single-tag (single-tagged data) - double-tag (double-tagged) - mcast (multicast single-tagged) value mcast-down-bw The amount of downstream bandwidth for a MCVLAN. Valid values are 1 - 2400 mbps. description text Descriptive text associated with this object. A string of up to 80 characters using alphanumeric characters plus dash "-" and underscore "_". forwarding-mode fwdmode Specifies the type of VLAN forwarding mode. Valid choices are: - chassis-fwdmode - isolated (TR-101 access) - switched Default Values Page 20 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Adding New vlantype=single-tag mcast-down-bw = 500mbps forwarding mode = chassis-fwdmode Confirmation Message Command completed successfully Example(s) Example 1: (Default VLAN type) AXS2200> set vlan svid 455 name RSPVLAN Command completed successfully Example 2: (Specified VLAN type) AXS2200> set vlan svid 20 name alpha-VLAN vlantype double-tag Command completed successfully Example 3 (mcast vlan): AXS2200> set vlan svid 306 name mcvlan-306 vlantype mcast mcast-down-bw 600 Command completed successfully Example 4: (Specified VLAN forwarding mode AXS2200> set vlan svid 20 name alpha-VLAN vlantype double-tag forwarding-mode isolated Command completed successfully Error Codes VLAN - SVID already in use and reserved for point to point connections only Invalid svid Max number of VLANs per system reached Name already in use Invalid BW Rate Specified VLAN is not mcast type Invalid, VLAN id already exists Maximum number of multicast VLANS already defined AGPONC card is incompatible with feature - remove and clear slot first Maximum number of VLANs using non-default forwarding mode already configured Forwarding mode can only be set on single tagged VLANs Page 21 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 22 Connections - Adding New AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Delete Connections - Delete del conn name (connection-name) Description Used to delete all configuration data for a connection. The connection can be any type of connection that has a name (i.e. a point to point double-tagged VLAN) The connection must be set to administrative state inactive before it can be deleted. For a tdm-h248 connection, the connection state must first be set to inactive, and all POTS channels must be deleted, prior to deleting the connection. Additionally, the Ethernet CFM Carrier Domain level MEP and MIP will be deleted for the connection. User Privilege Level: Superuser Required Parameters: name connection-name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Default Values none Confirmation Message You have elected to delete a connection. All user configured data for this connection will be permanently lost. Do you want to proceed? y | n >y Command completed successfully Example(s) AXS2200> del conn name vgwconn You have elected to delete a connection. connection will be permanently lost. All user configured data for this Do you want to proceed? y | n > y Command completed successfully Error Codes AccessLink MEP must first be deleted Connection does not exist Invalid conn-name POTS channel(s) are configured Connection admin state is required to be inactive VLAN - Must delete ONT connections first VLAN - SVID in use - cannot be used for point to point connection Page 23 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Delete del conn olt (oltaddress) Description Used to delete all configuration data for a connection. The connection must be set to administrative state inactive as a precondition. If the connection is a tdm-h248 connection, the connection state must be set to inactive, and all POTS channels must be deleted first. Additionally, the Ethernet CFM Carrier Domain level MEP and MIP will be deleted for the connection. User Privilege Level: Superuser Required Parameters: olt oltaddress Indicates the interface address on the OLT system. The format is different depending on the type of interface: - slot-vg-index for a tdm-h248 connection endpoint on an AVGC Voice Gateway card (i.e. whose potschannels are destined to GR-303, T1CAS and/or TR-08 interface). Index takes a range of 1-4000 (e.g. au-1-vg-15) - slot-port-svid-cvid for a double-tagged VLAN connection endpoint on a card that terminates GigE interfaces. svid and cvid are the values of the Service and Customer VLAN Identifiers. svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, vdsl2) 2012-2075 for voip conn (e.g. sw-a-4-30-2012) - lag-group-svid-cvid for a double-tagged VLAN connection endpoint on a link aggregation group. The group is the link aggregation group and takes a value from 1-128. svid and cvid are the values of the Service and Customer svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, vdsl2) 2012-2075 for voip conn (e.g. lag-1-30-24 for data conn) Default Values none Confirmation Message Page 24 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Delete You have elected to delete a connection. All user configured data for this connection will be permanently lost. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: (voice gateway card tdm-h248 connection) AXS2200> del conn olt au-1-vg-100 You have elected to delete a connection. connection will be permanently lost. All user configured data for this Do you want to proceed? y | n > y Command completed successfully Example 2: (GigE card connection ) AXS2200> del conn olt sw-a-4-30-2012 You have elected to delete a connection. connection will be permanently lost. All user configured data for this Do you want to proceed? y | n > y Command completed successfully Example 3: (connection on Ethernet Line card ) AXS2200> del conn olt au-11-4-30-2012 You have elected to delete a connection. connection will be permanently lost. All user configured data for this Do you want to proceed? y | n > y Command completed successfully Error Codes AccessLink MEP must first be deleted invalid connection endpoint invalid-delete connections on the working slot of a 1+1 protected group POTS channel(s) are configured Connection admin state is required to be inactive VLAN - SVID in use - cannot be used for point to point connection Page 25 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Delete del conn ont (connendpointaid) Description Used to delete all configuration data for a point to point connection (i.e. double tagged VLAN). The connection must be set to administrative state inactive as a precondition. If the connection is a tdm-h248 connection, the connection state must first be set to inactive, and all POTS channels must be deleted first. Additionally, the Ethernet CFM Carrier Domain level MEP and MIP will be deleted for the connection. User Privilege Level: Superuser Required Parameters: ont connendpointaid Specifies the ONT connection endpoint address. It takes one of the following formats, depending on the connection endpoint type: For Ethernet, MoCA, or VDSL2 ports on integrated ONTs: - oltslot-port-channel-ontporttype-index (e.g. au-5-1-1-enet-1, au-5-1-1-moca-1) For a tdm-h248 connection to all POTs ports on integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-pots) For a VOIP connection to all POTs ports on the integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-voip) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - ontporttype (pots, enet, moca, voip, vdsl2) - index (1-n) Default Values none Confirmation Message You have elected to delete a connection. All user configured data for this connection will be permanently lost. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del conn ont au-3-4-16-pots You have elected to delete a connection. Page 26 All user configured data for this AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Delete connection will be permanently lost. Do you want to proceed? y | n > y Command completed successfully Example 2: (connection to an ONT6000 Ethernet interface) AXS2200> del conn ont au-5-1-1-enet-1 You have elected to delete a connection. connection will be permanently lost. All user configured data for this Do you want to proceed? y | n > y Command completed successfully Error Codes Invalid ONT connection endpoint AccessLink MEP must first be deleted Port is a VLAN member (port is not part of a point to point connection) Connection does not exist ONT does not exist POTS channel(s) are configured Connection admin state is required to be inactive VLAN - SVID in use - cannot be used for point to point connection Page 27 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Delete del vlan name (vlanname) Description Deletes the vlan by the VLAN name. All VLAN members must be deleted first before the VLAN can be deleted. For mcast VLAN, channel bandwidth table of this VLAN must be deleted first. All Intracarrier domain MEPs on the OLT for the VLAN must first be deleted. User Privilege Level: Superuser Required Parameters: name vlanname Identifies the name of the VLAN. Can take up to 32 characters in length. Default Values none Confirmation Message This will delete the vlan. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del vlan name metro-svlan-1000 This will delete the vlan. Do you want to continue? y | n > y Command completed successfully Error Codes Intracarrier MEP must first be deleted IPTV packages and static channels of this vlan must be deleted first VLAN not found VLAN members must first be deleted Channel bandwidth table of this vlan must be deleted first Page 28 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Delete del vlan svid (svlanid) Description Deletes the vlan id. All VLAN members must be deleted first before the VLAN can be deleted. For mcast VLAN, channel bandwidth table of this VLAN must be deleted first. All Intracarrier domain MEPs on the OLT for the VLAN must first be deleted. User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message This will delete the vlan. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del vlan svid 1000 This will delete the vlan. Do you want to continue? y | n > y Command completed successfully Error Codes Intracarrier MEP must first be deleted Invalid svid VLAN not found VLAN members must first be deleted IPTV packages and static channels of this vlan must be deleted first Channel bandwidth table of this vlan must be deleted first Page 29 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 30 Connections - Delete AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Profiles Connections - Profiles show profile (all) Description Shows all the profiles defined in the system, listed by profile type. Profile types include potsport, enetport, vdslport, ont-profile, ont-sipConfig, mocaport, videoport, iptv, l2config, pbitremap,dscpmap, ont-qosconfig, ont-eh248config, poeconfig, and lldp-med. Profiles that are used as defaults are noted with an asterisk after the name. To view details by individual profile type, use the CLI command "show profile <profiletype>". For example "show profile potsport". User Privilege Level: Operator Required Parameters: all Selects all. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show profile all =============================================================================== PROFILE ALL REPORT DATE: 06/1/2007 TIME: 16:08:22 =============================================================================== Profile Type Profile Name ------------ -------------------potsport qbdef* potsport disalarms enetport qbdef* videoport qbdef* ont-profile qbdef* ont-sipconfig qbdef* ont-eh248config qbdef* mocaport qbdef* vdslport qbdef* iptv qbdef iptv bronze* iptv silver iptv gold l2config qbdef* pbitremap qbdef* dscpmap qbdef* ont-qosconfig qbdef* poeconfig qbdef* lldp-med qbdef* lldp-med pol21 Page 31 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Profiles =============================================================================== Command completed successfully Error Codes Page 32 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Profiles show profile l2config name (l2configname) Description Displays the contents of the Layer 2 Configuration Profile specified. The following parameters are listed: Accepted Frame Types: {tagged | untagged | all} Are incoming P-bits trusted: {yes | no} Default assigned Fixed Priority value: {0-7} Transparent LAN Service (TLS): {yes, no} Pbitremap Enabled: {yes, no} DSCPmap Enabled: {yes, no} maxmac: {0-32} User Privilege Level: Operator Optional Parameters: name l2configname Name of the Layer 2 profile Default Values If no name provided, all names in the profile will be shown. Confirmation Message Command completed successfully Example(s) Example 1: (specific entry) AXS2200> show profile l2config name gold =============================================================================== Layer 2 Configuration PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name --------------gold Accept Frame Types -------untagged Trust P-bits -----N/A Fixed Prio TLS ---- ---2 no Pbit DSCP remap map enable enable ------ -----yes yes Max MAC -----32 =============================================================================== Command completed successfully Example 2: (all entries) AXS2200> show profile l2config =============================================================================== Layer 2 Configuration PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Page 33 Accept Frame Trust Fixed Pbit DSCP remap map Max AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Name -------------gold tls qbdef* Connections - Profiles Types -------untagged tagged all P-bits -----N/A yes no Prio ---2 3 0 TLS enable enable MAC ---- ------ ---- -----no yes yes 32 yes no no 0 no no no 0 =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 34 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 35 Connections - Profiles AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Connections - Show show conn all intfc ({ slot | slot-port | ontaddress | lag}) report ({short | long} ) Description This report will show the connection summary. You may select either a long or short report. The following information is displayed for each connection: Administrative State (active, inactive) Operational State (active, inactive, fault) Connection endpoints (only for long reports): Endpoint types include: - enet - moca - pots - vgw - gige - voip - vdsl2 - lag (for link aggregation group) Connection Name: The user-specified connection name. The report is provided in the order that the connections were provisioned. User Privilege Level: Operator Required Parameters: all Optional Parameters: report {short | long} Indicates the type of report desired. The short report will only display connection types, states, and the connection name. The long report will additionally include both endpoints. intfc lag} { slot | slot-port | ontaddress | Identifies the filter criteria for the report: - slot (will report the selected slot only) - slot-port (will report the selected port only) - ontaddress in the format of slot-port-channel (will report the selected ont only) - lag in the format of lag-index (will report the selected link aggregation group only) Default Values intfc= all (including all ports, ONTs and link aggregation groups) report = short Confirmation Message Command completed successfully Page 36 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Example(s) Example 1: (intfc not specified) AXS2200> show conn all report long Ad= Administrative State Op= Operational State A=Active, I=Inactive, F=Fault =============================================================================== CONNECTION LONG REPORT DATE: 05/31/2007 TIME: 07:14:40 =============================================================================== Ad/ Op === A/A Intfc Type ====== voip gige Endpoint AID ==================== au-5-4-16-voip sw-a-1-35-2012 Conn-Name ============================================== voipconn91123456789212345678931234567894123456 7895123456789612345678971234567898 A/A enet gige au-5-4-16-enet-1 sw-a-1-20-16 dataconn91123456789212345678931234567894123456 7895123456789612345678971234567898 A/F pots vgw au-12-1-16-pots au-1-vg-100 vgwpotsconn23456789212345678931234567894123456 7895123456789612345678971234567898 A/A moca au-5-5-12-moca-1 datamocaconn3456789212345678931234567894123456 lag lag-1 7895123456789612345678971234567898 . . . =============================================================================== Command completed successfully Example 2: (short report specified) AXS2200> show conn all report short Ad= Administrative State Op= Operational State A=Active, I=Inactive, F=Fault =============================================================================== CONNECTION SHORT REPORT DATE: 05/31/2007 TIME: 07:14:40 =============================================================================== Ad/ Op Conn-Name === ========================================================================= A/A voipconn91123456789212345678931234567894123456789512345678961234567897123 4567898 A/A dataconn91123456789212345678931234567894123456789512345678961234567897123 4567898 A/F vgwpotsconn23456789212345678931234567894123456789512345678961234567897123 4567898 . . . =============================================================================== Command completed successfully Example 3: (No connections configured) AXS2200> show conn all intfc au-5-2 no connections configured Page 37 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Command completed successfully Error Codes Invalid port Invalid slot Connection does not exist for 1+1 protection slot No connections configured Page 38 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show show conn name (connection-name) Description Displays the connection configuration and operational state. For connections over GPON, the following information will be displayed: OLT Connection Name: User-defined value Endpoint 1 AID: Address identifier (AID) of the first endpoint of the connection. Endpoint 2 AID: Address identifier (AID) of the second endpoint of the connection. PON Encaps: packet (GEM packets on the PON) ONT TCONT ID: The TCONT identifier {1-n} for the GPON connection. Transparent LAN Service (TLS): {yes | no} (Valid only for enet,moca and vdsl2 connections) Administrative State: User-selected state of the connection (active, inactive) Operational State: Actual operating state of the connection (active, inactive, faulted) Transmit Traffic Descriptor (1 -> 2): tx-td trafname Receive Traffic Descriptor (2 -> 1): rx-td trafname Traffic Descriptor Details: Displays the full entry in the traffic table for the transmit direction (tx-td) and the receive direction (rx-td) Ethernet CFM: The setting for Ethernet Configuration and Fault Management (CFM) Admin State {enable, disable, unavailable). Unavailable is for H.248/POTS connections (The remaining information is shown only if Ethernet CFM is enabled) Carrier MD: Identifies the Carrier Maintenance Domain (MD). (Lists the Maintenance Endpoint (MEP) on the ONT port, and the Maintenance Intermediate Point (MIP) on the OLT in the Carrier MD for this connection) ONT MEP Port AID: Address identifier (AID) of the ONT Port where the MEP exists MEP ID: The local CFM MEP ID, or unknown SVID/CVID: Displays the SVID and CVID for the MEP (MAID) MD Level: The Level of the Maintenance Domain Direction: Up or Down OLT MIP: Location of the MIP MIP SVID/CVID: The SVID and CVID associated with the MIP. MD Level: The Level of the Maintenance Domain IntraCarrier MD Level: Identifies the Intra-Carrier Maintenance Domain (Lists the MEP in the IntraCarrier MD on the OLT port for the SVLAN ID used by this connection) OLT MEP Port AID: Address identifier (AID) of the OLT Port where the MEP exists MEP ID: The local CFM MEP ID or unknown SVID: The SVLAN ID for the MEP (MAID) MD Level: The IntraCarrier Maintenance Domain Level Direction: Up or Down Ethernet CFM does not apply to VoIP/H.248 POTS connections. To view POTS (voice) channels carried within a tdm-h248 connection, use the command "show potschannel conn (connection name)". User Privilege Level: Operator Required Parameters: Page 39 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA name Connections - Show connection-name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1 (ONT VoIP to OLT GigE, Ethernet CFM enabled): AXS2200> show conn name customervoip =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2005 TIME: 07:14:40 =============================================================================== OLT Connection Name: customervoip Endpoint1 AID: au-5-1-16-voip (voip) Endpoint2 AID: sw-a-4-40-2013 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_voip2 Receive traffic descriptor (2->1): pkt_voip2 Traffic Descriptor Details Traf-Name Srvc pkt_voip2 pkt PIR 2.0 CIR 0.3 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-voip MEP ID: 2 SVID/CVID: 40/2013 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/2013 MD Level: 3 IntraCarrier MD OLT MEP Port AID: sw-a-4 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 2 (ONT H.248 to OLT GigE): AXS2200> show conn name customerh248 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2005 TIME: 07:14:40 =============================================================================== OLT Connection Name: customerh248 Endpoint1 AID: au-5-1-16-pots (pots) Endpoint2 AID: au-1-vg-15 (vg) PON Encaps: packet ONT TCONT ID: 1 Page 40 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_pots2 Receive traffic descriptor (2->1): pkt_pots2 Traffic Descriptor Details Traf-Name Srvc pkt_pots2 pkt PIR 2.0 CIR 0.3 Ethernet CFM: unavailable =============================================================================== Command completed successfully Example 3 (ONT ENET to OLT GigE, Ethernet CFM enabled): AXS2200> show conn name university12 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt PIR 5.0 CIR 0.0 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-enet-1 MEP ID: 2 SVID/CVID: 40/16 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/16 MD Level: 3 IntraCarrier MD OLT MEP Port AID: sw-a-1 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 4 (same as example 3 except ONT is preprovisioned): AXS2200> show conn name university12 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Page 41 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: inactive Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt PIR 5.0 CIR 0.0 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-enet-1 MEP ID: 2 SVID/CVID: 40/16 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/16 MD Level: 3 IntraCarrier MD OLT MEP Port AID: sw-a-1 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 5 (ONT ENET to OLT GigE, Ethernet CFM enabled, no MEP for the SVLAN is created on the WAN uplink): AXS2200> show conn name university12 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt PIR 5.0 CIR 0.0 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-enet-1 MEP ID: 2 SVID/CVID: 40/16 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/16 =============================================================================== Command completed successfully Page 42 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Example 6 (ONT ENET to OLT GigE, Ethernet CFM disabled, and a MEP exists for the SVLAN on the WAN uplink): AXS2200> show conn name university12 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt PIR 5.0 CIR 0.0 Ethernet CFM: disable =============================================================================== Command completed successfully Error Codes Connection does not exist Page 43 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show show conn olt (oltaddresswn1) Description Displays the connection configuration and operational state. For connections over GPON, the following information will be displayed: OLT Connection Name: User-defined value Endpoint 1 AID: Address identifier (AID) of the first endpoint of the connection. Endpoint 2 AID: Address identifier (AID) of the second endpoint of the connection. PON Encaps: packet (GEM packets on the PON) ONT TCONT ID: The TCONT identifier {1-n} for the GPON connection. Transparent LAN Service (TLS): {yes | no} (Valid only for enet,moca and vdsl2 connections) Administrative State: User-selected state of the connection (active, inactive) Operational State: Actual operating state of the connection (active, inactive, faulted) Transmit Traffic Descriptor (1 -> 2): tx-td trafname Receive Traffic Descriptor (2 -> 1): rx-td trafname Traffic Descriptor Details: Displays the full entry in the traffic table for the transmit direction (tx-td) and the receive direction (rx-td) Ethernet CFM: The setting for Ethernet Configuration and Fault Management (CFM) Admin State {enable, disable, unavailable). Unavailable is for H.248/POTS connections (The remaining information is shown only if Ethernet CFM is enabled) Carrier MD: Identifies the Carrier Maintenance Domain (MD). (Lists the Maintenance Endpoint (MEP) on the ONT port, and the Maintenance Intermediate Point (MIP) on the OLT in the Carrier MD for this connection) ONT MEP Port AID: Address identifier (AID) of the ONT Port where the MEP exists MEP ID: The local CFM MEP ID, or unknown SVID/CVID: Displays the SVID and CVID for the MEP (MAID) MD Level: The Level of the Maintenance Domain Direction: Up or Down OLT MIP: Location of the MIP MIP SVID/CVID: The SVID and CVID associated with the MIP. MD Level: The Level of the Maintenance Domain IntraCarrier MD Level: Identifies the Intra-Carrier Maintenance Domain (Lists the MEP in the IntraCarrier MD on the OLT port for the SVLAN ID used by this connection) OLT MEP Port AID: Address identifier (AID) of the OLT Port where the MEP exists MEP ID: The local CFM MEP ID or unknown SVID: The SVLAN ID for the MEP (MAID) MD Level: The IntraCarrier Maintenance Domain Level Direction: Up or Down Ethernet CFM does not apply to VoIP/H.248 POTS connections. To view POTS (voice) channels carried within a tdm-h248 connection, use the command "show potschannel conn (connection name)". User Privilege Level: Operator Required Parameters: Page 44 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show olt oltaddresswn1 Indicates the interface address on the OLT system. The format is different depending on the type of interface: - slot-vg-index for a tdm-h248 connection endpoint on an AVGC Voice Gateway card (i.e. whose potschannels are destined to GR-303, T1CAS and/or TR-08 interface). Index takes a range of 1-4096 (e.g. au-1-vg-15) - slot-port-svid-cvid for a double-tagged VLAN connection endpoint on a card that terminates GigE interfaces. svid and cvid are the values of the Service and Customer VLAN Identifiers. svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, hcna, vdsl2) 2012-2075 for voip conn (e.g. sw-a-4-30-2012) - lag-group-svid-cvid for a double-tagged VLAN connection endpoint on a link aggregation group. The group is the link aggregation group and takes a value from 1-128. svid and cvid are the values of the Service and Customer svid takes a range of 16-303 cvid takes a range of 12-512 for data (enet, moca, hcna, vdsl2) 2012-2075 for voip conn (e.g. lag-1-30-24 for data conn) Default Values none Confirmation Message Command completed successfully Example(s) Example 1 (ONT ENET to OLT GigE, Ethernet CFM enabled): AXS2200> show conn olt sw-a-1-40-16 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt Page 45 PIR 5.0 CIR 0.0 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-enet-1 MEP ID: 2 SVID/CVID: 40/16 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/16 MD Level: 3 IntraCarrier MD OLT MEP Port AID: sw-a-1 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 2 (ONT VoIP to OLT GigE, Ethernet CFM enabled): AXS2200> show conn olt sw-a-1-40-2013 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2005 TIME: 07:14:40 =============================================================================== OLT Connection Name: customervoip Endpoint1 AID: au-5-1-16-voip (voip) Endpoint2 AID: sw-a-1-40-2013 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_voip2 Receive traffic descriptor (2->1): pkt_voip2 Traffic Descriptor Details Traf-Name Srvc pkt_voip2 pkt PIR 2.0 CIR 0.3 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-voip MEP ID: 2 SVID/CVID: 40/2013 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/2013 MD Level: 3 IntraCarrier MD OLT MEP Port AID: sw-a-1 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 3 (ONT VoIP to OLT Link Aggregation Group, Ethernet CFM enabled): AXS2200> show conn olt lag-10-20-2014 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 Page 46 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show =============================================================================== OLT Connection Name: custvoipgpon Endpoint1 AID: au-5-1-16-voip (voip) Endpoint2 AID: lag-10-20-2014 (lag) PON Encaps: packet ONT TCONT ID: 1 Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_voip2 Receive traffic descriptor (2->1): pkt_voip2 Traffic Descriptor Details Traf-Name Srvc pkt_voip2 pkt PIR 2.0 CIR 0.3 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-voip MEP ID: 2 SVID/CVID: 20/2014 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 20/2014 MD Level: 3 IntraCarrier MD OLT MEP Port AID: lag-10 MEP ID: 2 SVID: 20 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 4 (ONT H.248 to OLT GigE): AXS2200> show conn olt au-1-vg-15 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2005 TIME: 07:14:40 =============================================================================== OLT Connection Name: customerh248 Ethernet CFM: disable Endpoint1 AID: au-5-1-16-pots (pots) Endpoint2 AID: au-1-vg-15 (vg) PON Encaps: packet ONT TCONT ID: 1 Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_pots2 Receive traffic descriptor (2->1): pkt_pots2 Traffic Descriptor Details Traf-Name Srvc pkt_pots2 pkt Ethernet CFM: PIR 2.0 CIR 0.3 unavailable =============================================================================== Command completed successfully Example 5 (ONT Ethernet port to OLT GigE, Ethernet CFM enabled, ONT is preprovisioned): AXS2200> show conn olt sw-a-1-40-16 =============================================================================== Page 47 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: inactive Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt PIR 5.0 CIR 0.0 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-enet-1 MEP ID: 2 SVID/CVID: 40/16 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/16 MD Level: 3 IntraCarrier MD OLT MEP Port AID: sw-a-1 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Error Codes Invalid OLT connection endpoint Connection does not exist Page 48 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show show conn ont (connendpointaid) Description Displays the connection configuration and operational state. For connections over GPON, the following information will be displayed: OLT Connection Name: User-defined value Endpoint 1 AID: Address identifier (AID) of the first endpoint of the connection. Endpoint 2 AID: Address identifier (AID) of the second endpoint of the connection. ONT TCONT ID: The TCONT identifier {1-n} for the GPON connection. PON Encaps: packet (GEM packets on the PON) Transparent LAN Service (TLS): {yes | no} (Valid only for enet,moca and vdsl2 connections) Administrative State: User-selected state of the connection (active, inactive) Operational State: Actual operating state of the connection (active, inactive, faulted) Transmit Traffic Descriptor (1 -> 2): tx-td trafname Receive Traffic Descriptor (2 -> 1): rx-td trafname Traffic Descriptor Details: Displays the full entry in the traffic table for the transmit direction (tx-td) and the receive direction (rx-td) Ethernet CFM: The setting for Ethernet Configuration and Fault Management (CFM) Admin State {enable, disable, unavailable). Unavailable is for H.248/POTS connections (The remaining information is shown only if Ethernet CFM is enabled) Carrier MD: Identifies the Carrier Maintenance Domain (MD). (Lists the Maintenance Endpoint (MEP) on the ONT port, and the Maintenance Intermediate Point (MIP) on the OLT in the Carrier MD for this connection) ONT MEP Port AID: Address identifier (AID) of the ONT Port where the MEP exists MEP ID: The local CFM MEP ID, or unknown SVID/CVID: Displays the SVID and CVID of the MEP (MAID) MD Level: The Level of the Maintenance Domain Direction: Up or Down OLT MIP: Location of the MIP MIP SVID/CVID: The SVID and CVID associated with the MIP. MD Level: The Level of the Maintenance Domain IntraCarrier MD Level: Identifies the Intra-Carrier Maintenance Domain (Lists the MEP in the IntraCarrier MD on the OLT port for the SVLAN ID used by this connection) OLT MEP Port AID: Address identifier (AID) of the OLT Port where the MEP exists MEP ID: The local CFM MEP ID or unknown SVID: The VLAN ID for the MEP (MAID) MD Level: The IntraCarrier Maintenance Domain Level Direction: Up or Down Ethernet CFM does not apply to VoIP/H.248 POTS connections. To view POTS (voice) channels carried within a tdm-h248 connection, use the command "show potschannel conn (connection name)". User Privilege Level: Operator Required Parameters: Page 49 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show ont connendpointaid Specifies the ONT connection endpoint address. It takes one of the following formats, depending on the connection endpoint type: For Ethernet, MoCA, or VDSL2 ports on integrated ONTs: - oltslot-port-channel-ontporttype-index (e.g. au-5-1-1-enet-1, au-5-1-1-moca-1) For a tdm-h248 connection to all POTs ports on integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-pots) For a VOIP connection to all POTs ports on the integrated ONTs: - oltslot-port-channel-ontporttype (e.g. au-5-1-1-voip) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - ontporttype (pots, enet, moca, voip, vdsl2) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Example 1 (ONT ENET to OLT GigE, Ethernet CFM enabled): AXS2200> show conn ont au-5-1-16-enet-1 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt PIR 5.0 CIR 0.0 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-enet-1 MEP ID: 2 SVID/CVID: 40/16 MD Level: 3 Direction: up OLT MIP: MIP SVID/CVID: 40/16 MD Level: 3 IntraCarrier MD Page 50 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Port AID: sw-a-1 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 2 (ONT VoIP to OLT GigE, Ethernet CFM disabled): AXS2200> show conn ont au-5-1-16-voip =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: custvoipgpon Ethernet CFM: disable Endpoint1 AID: au-5-1-16-voip (voip) Endpoint2 AID: sw-a-4-21-2015 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_voip2 Receive traffic descriptor (2->1): pkt_voip2 Traffic Descriptor Details Traf-Name Srvc pkt_voip2 pkt PIR 2.0 CIR 0.3 Ethernet CFM: disable =============================================================================== Command completed successfully Example 3 (ONT VoIP to OLT Link Aggregation Group, Ethernet CFM enabled): AXS2200> show conn ont au-5-1-16-voip =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: custvoipgpon Endpoint1 AID: au-5-1-16-voip (voip) Endpoint2 AID: lag-10-20-2014 (lag) PON Encaps: packet ONT TCONT ID: 1 Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_voip2 Receive traffic descriptor (2->1): pkt_voip2 Traffic Descriptor Details Traf-Name Srvc pkt_voip2 pkt PIR 2.0 CIR 0.3 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-voip MEP ID: 2 SVID/CVID: 20/2014 MD Level: 3 Direction: up Port AID: lag-10 MIP SVID/CVID: 20/2014 MD Level: 3 Page 51 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show IntraCarrier MD OLT MEP Port AID: lag-10 MEP ID: 2 SVID: 20 MD Level: 2 Direction: down =============================================================================== Command completed successfully Example 4 (ONT pots to OLT voice gateway packet connection, providing bandwidth for up to 4 pots channels): AXS2200> show conn ont au-5-1-27-pots =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: custpotsgpon Ethernet CFM: disable Endpoint1 AID: au-5-1-27-pots (pots) Endpoint2 AID: au-3-vg-4 (vgw) PON Encaps: packet ONT TCONT ID: 1 Administrative State: active Operational State: active Transmit traffic descriptor (1->2): pkt_pots2 Receive traffic descriptor (2->1): pkt_pots2 Traffic Descriptor Details Traf-Name Srvc pkt_pots2 pkt PIR 2.0 CIR 0.3 Ethernet CFM: unavailable =============================================================================== Command completed successfully Example 5 (ONT Ethernet port to OLT GigE, Ethernet CFM enabled, ONT is preprovisioned): AXS2200> show conn ont au-5-1-16-enet-1 =============================================================================== INDIVIDUAL CONNECTION REPORT DATE: 07/26/2007 TIME: 07:14:40 =============================================================================== OLT Connection Name: university12 Endpoint1 AID: au-5-1-16-enet-1 (enet) Endpoint2 AID: sw-a-1-40-16 (gige-intfc) PON Encaps: packet ONT TCONT ID: 1 Transparent LAN Service (TLS): no Administrative State: active Operational State: inactive Transmit traffic descriptor (1->2): pkt_data Receive traffic descriptor (2->1): pkt_data Traffic Descriptor Details Traf-Name Srvc pkt_fttpdata pkt PIR 5.0 CIR 0.0 Ethernet CFM: enable Carrier MD ONT MEP Port AID: au-5-1-16-enet-1 MEP ID: 2 SVID/CVID: 40/16 MD Level: 3 Page 52 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Direction: up OLT MIP: MIP SVID/CVID: 40/16 MD Level: 3 IntraCarrier MD OLT MEP Port AID: sw-a-1 MEP ID: 2 SVID: 40 MD Level: 2 Direction: down =============================================================================== Command completed successfully Error Codes Invalid ONT connection endpoint Connection does not exist Page 53 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show show vlan name (vlanname) report ({ short | long }) Description This command shows the parameters associated with a VLAN. A long version and a short version of the report are available. For all versions of the report, it displays: - S-VID: {2-4085} - VLAN Name: the user configured name for the VLAN - VLAN Type: single-tagged, double-tagged, mcast - VLAN Forwarding Mode: chassis-fwdmode, isolated, switched, or n/a if doubletagged or mcast - Operating VLAN Forwarding Mode: isolated, switched, or n/a if double-tagged - IP Address Binding/Mask: The IP address binding and mask - Broadcast/Multicast/Unknown Unicast rate limit in packets per second, or n/a if a multicast VLAN. - Downstream rate limit: enable/disable (for single-tag data VLAN only) - Service Type: {unspecified, voice, video, data mixed, inBandMgmt } - Description : Textual description of the VLAN For Multicast VLAN, additional information is shown: - Downstream BW: in Mbps - Loss of Channel Alarm: enable or disable - Loss of Channel Alarm Threshod: 5 - 65535 seconds - Mode: snooping or proxy-reporting Only for the long version of the report, the additional information is shown for each VLAN member: - Port AID - CVID: displays the C-VID for ONT members of a double-tagged VLAN, or "-" for all WAN members or ONT members of a single-tagged VLAN. - DS Traffic Desc: Downstream traffic descriptor name - US Traffic Desc: Upstream traffic descriptor name - TLS: The value for the Port TLS attribute for ONT members, or "-" for all WAN members - CPE VID: The value for the VLAN ID (VID) received from the CPE device. If the member is a WAN member then "-" is shown since this is not applicable. If there is no configured CPE VID for an ONT member, then "-" is shown. - Admin State of the member: active (A), inactive (I) - Oper State of the member: active (A), inactive (I), fault (F), unknown (UNK) For long version report of a Multicast VLAN, it also displays missing channels. User Privilege Level: Operator Required Parameters: name vlanname Identifies the name of the VLAN. Can take up to 32 characters in length. Optional Parameters: report { short | long } Indicates the type of report desired: - short - long Page 54 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Default Values report = long format unless otherwise specified Confirmation Message Command completed successfully Example(s) Example 1: (single-tagged VLAN, default report format used - long) AXS2200> show vlan name vlan401 A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 401 VLAN Name: vlan401 VLAN Type: single-tag VLAN Forwarding Mode: chassis-fwdmode Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Downstream rate limit: enable Service Type: data Description : oompa_loompa Members: State Admin/ Oper ----A/A Port AID -----------------sw-a-3 CVID ---- Traffic Desc -------------------------------DS: gold_wan_ds US: gold_wan_us TLS --- CPE VID ---- au-6-2-1-enet-1 - DS: gold_cpe_ds US: gold_cpe_us no 100 A/A au-6-2-2-enet-1 - DS: gold_cpe_ds US: gold_cpe_us no 100 I/I =============================================================================== Command completed successfully Example 2: (double-tagged VLAN, long report format specified) AXS2200> show vlan name vlan16 report long A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 16 VLAN Name: vlan16 VLAN Type: double-tag VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: n/a IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Page 55 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Service Type: data Description : oompa_loompa Members: State Admin/ Oper ----A/A Port AID -----------------lag-1 CVID ---- Traffic Desc -------------------------------DS: gold_wan_ds US: gold_wan_us TLS --- CPE VID ---- au-5-1-1-enet-1 30 DS: gold_cpe_ds US: gold_cpe_us no 100 A/A au-5-1-2-enet-1 31 DS: gold_cpe_ds US: gold_cpe_us no - I/I =============================================================================== Command completed successfully Example 3: (single-tagged VLAN, short report format specified) AXS2200> show vlan name vlan401 report short A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 401 VLAN Name: vlan401 VLAN Type: single-tag VLAN Forwarding Mode: chassis-fwdmode Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Downstream rate limit: enable Service Type: data Description : oompa_loompa =============================================================================== Command completed successfully Example 4: (Multicast VLAN, default report format used - long) AXS2200> show vlan name vlan306 A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 306 VLAN Name: vlan306 VLAN Type: mcast VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): n/a Service Type: video Description : oompa_loompa Page 56 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Downstream BW: 500 mbps Loch Alarm: enable Alarm Threshold: 5 second Mode: snooping Members: State Admin/ Oper ----A/A Port AID -----------------sw-a-3 CVID ---- Traffic Desc -------------------------------DS: mcast_wan_ds US: mcast_wan_us TLS --- CPE VID ---- au-6-2-1-enet-1 - DS: mcast_cpe_ds US: mcast_cpe_us no - A/A au-6-2-2-enet-1 - DS: mcast_cpe_ds US: mcast_cpe_us no - I/I Missing channels: 224.192.45.33 224.192.45.34 224.192.45.35 224.192.45.36 224.192.45.37 224.192.45.38 224.192.45.39 224.192.45.40 224.192.45.41 224.192.45.42 224.192.45.43 224.192.45.44 224.192.45.45 224.192.45.46 224.192.45.47 224.192.45.48 224.192.45.49 224.192.45.50 224.192.45.51 224.192.45.52 =============================================================================== Command completed successfully Example 5: (Multicast VLAN, short version report) AXS2200> show vlan name vlan306 report short A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 306 VLAN Name: vlan306 VLAN Type: mcast VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): n/a Service Type: video Description : oompa_loompa Downstream BW: 500 mbps Loch Alarm: enable Alarm Threshold: 5 second Mode: snooping =============================================================================== Command completed successfully Example 6: (double-tagged VLAN, long report format specified, no members configured) AXS2200> show vlan name vlan16 report long A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 Page 57 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show =============================================================================== S-VID: 16 VLAN Name: vlan16 VLAN Type: double-tag VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: n/a IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Service Type: unspecified Description : oompa_loompa Members: none =============================================================================== Command completed successfully Error Codes Invalid name VLAN not found Page 58 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show show vlan svid (svlanid) report ({ short | long }) Description This command shows the parameters associated with a VLAN. A long version and a short version of the report are available. For all versions of the report, it displays: - S-VID: {2-4085} - VLAN Name: the user configured name for the VLAN - VLAN Type: single-tagged, double-tagged, mcast - VLAN Forwarding Mode: chassis-fwdmode, isolated, switched, or n/a if doubletagged or mcast - Operating VLAN Forwarding Mode: isolated, switched, or n/a if double-tagged - IP Address Binding/Mask: The IP address binding and mask - Broadcast/Multicast/Unknown Unicast rate limit in packets per second, or n/a if a multicast VLAN. - Downstream rate limit: enable/disable (for single-tag data VLAN only) - Service Type: { unspecified, voice, data, video, mixed, inBandMgmt} - Description : Textual description of the VLAN For Multicast VLAN, additional information is shown: - Downstream BW: in Mbps - Loss of Channel Alarm: enable or disable - Loss of Channel Alarm Threshod: 5 - 65535 seconds - Mode: snooping or proxy-reporting Only for the long version of the report, the additional information is shown for each VLAN member: - Port AID - CVID: displays the C-VID for ONT members of a double-tagged VLAN, or "-" for all WAN members or ONT members of a single-tagged VLAN. - DS Traffic Desc: Downstream traffic descriptor name - US Traffic Desc: Upstream traffic descriptor name - TLS: The value for the Port TLS attribute for ONT members, or "-" for all WAN members - CPE VID: The value for the VLAN ID (VID) received from the CPE device. If the member is a WAN member then "-" is shown since this is not applicable. If there is no configured CPE vid for an ONT member, then "-" is shown. - Admin State of the member: active (A), inactive (I) - Oper State of the member: active (A), inactive (I), fault (F), unknown (UNK) For long version report of a Multicast VLAN, it also displays missing channels. User Privilege Level: Operator Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Optional Parameters: report { short | long } Indicates the type of report desired: - short - long Page 59 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Default Values report = long format unless otherwise specified Confirmation Message Command completed successfully Example(s) Example 1: (single-tagged VLAN, default report format used - long) AXS2200> show vlan svid 401 A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 401 VLAN Name: vlan401 VLAN Type: single-tag VLAN Forwarding Mode: chassis-fwdmode Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Downstream rate limit: enable Service Type: data Description : oompa_loompa Members: State Admin/ Oper ----A/A Port AID -----------------sw-a-3 CVID ---- Traffic Desc -------------------------------DS: gold_wan_ds US: gold_wan_us TLS --- CPE VID ---- au-6-2-1-enet-1 - DS: gold_cpe_ds US: gold_cpe_us no 100 A/A au-6-2-2-enet-1 - DS: gold_cpe_ds US: gold_cpe_us no 100 I/I =============================================================================== Command completed successfully Example 2: (double-tagged VLAN, long report format specified) AXS2200> show vlan svid 16 report long A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 16 VLAN Name: vlan16 VLAN Type: double-tag VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: n/a IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Page 60 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Service Type: data Description : oompa_loompa Members: State Admin/ Oper ----A/A Port AID -----------------lag-1 CVID ---- Traffic Desc -------------------------------DS: gold_wan_ds US: gold_wan_us TLS --- CPE VID ---- au-5-1-1-enet-1 30 DS: gold_cpe_ds US: gold_cpe_us no 100 A/A au-5-1-2-enet-1 31 DS: gold_cpe_ds US: gold_cpe_us no 100 I/I =============================================================================== Command completed successfully Example 3: (single-tagged VLAN, short report format specified) AXS2200> show vlan svid 401 report short A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 401 VLAN Name: vlan401 VLAN Type: single-tag VLAN Forwarding Mode: chassis-fwdmode Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Downstream rate limit: enable Service Type: data Description : oompa_loompa =============================================================================== Command completed successfully Example 4: (Multicast VLAN, default report format used - long) AXS2200> show vlan svid 306 A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 306 VLAN Name: vlan306 VLAN Type: mcast VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): n/a Service Type: video Description : oompa_loompa Page 61 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show Downstream BW: 500 mbps Loch Alarm: enable Alarm Threshold: 5 second Mode: snooping Members: State Admin/ Oper ----A/A Port AID -----------------sw-a-3 CVID ---- Traffic Desc -------------------------------DS: mcast_wan_ds US: mcast_wan_us TLS --- CPE VID ---- au-6-2-1-enet-1 - DS: mcast_cpe_ds US: mcast_cpe_us no - A/A au-6-2-2-enet-1 - DS: mcast_cpe_ds US: mcast_cpe_us no - I/I Missing channels: 224.192.45.33 224.192.45.34 224.192.45.35 224.192.45.36 224.192.45.37 224.192.45.38 224.192.45.39 224.192.45.40 224.192.45.41 224.192.45.42 224.192.45.43 224.192.45.44 224.192.45.45 224.192.45.46 224.192.45.47 224.192.45.48 224.192.45.49 224.192.45.50 224.192.45.51 224.192.45.52 =============================================================================== Command completed successfully Example 5: (Multicast VLAN, short version report) AXS2200> show vlan svid 306 report short A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 306 VLAN Name: vlan306 VLAN Type: mcast VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: isolated IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): n/a Service Type: video Description : oompa_loompa Downstream BW: 500 mbps Loch Alarm: enable Alarm Threshold: 5 second Mode: snooping =============================================================================== Command completed successfully Example 6: (double-tagged VLAN, long report format specified, no members configured) AXS2200> show vlan svid 16 report long A = Active, I = Inactive, F = Fault, UNK=Unknown US Traf Desc = Upstream (from ONT) Traffic Descriptor DS Traf Desc = Downstream (to ONT) Traffic Descriptor =============================================================================== VLAN REPORT DATE: 10/07/2008 TIME: 15:36:55 Page 62 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Connections - Show =============================================================================== S-VID: 16 VLAN Name: vlan16 VLAN Type: double-tag VLAN Forwarding Mode: n/a Operating VLAN Forwarding Mode: n/a IP Address Binding/Mask: 0.0.0.0/0.0.0.0 Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 Service Type: unspecified Description : oompa_loompa Members: none =============================================================================== Command completed successfully Error Codes Invalid svid VLAN not found Page 63 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 64 Connections - Show AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Data Plane Security copy acl-ip (aclname) to (name) Description This command allows the user to copy an existing IP ACL and all of its rules to a new IP ACL with a different name. It does not matter if the original IP ACL is in use or not. User Privilege Level: Admin Required Parameters: name to aclname The name of the Access Control List that the user wants to manage. It can be up to 20 characters in length including alphanumeric, "-" (dash), and "_" (underscore) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200 > copy acl-ip alpha to beta Command completed successfully Error Codes Access List limit exceeded From Access List name invalid To Access List already exists From Access List does not exist Invalid IP copy to MAC list Cannot copy qbdef Invalid "to" access list name Page 65 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security copy acl-mac (aclname) to (name) Description TThis command allows the user to copy an existing MAC ACL and all of its rules to a new MAC ACL with a different name. It does not matter if the original MAC ACL is in use or not. User Privilege Level: Admin Required Parameters: aclname The name of the Access Control List that the user wants to manage. It can be up to 20 characters in length including alphanumeric, "-" (dash), and "_" (underscore) name to Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200 > copy acl-mac alpha to beta Command completed successfully Error Codes Access List limit exceeded From Access List name invalid To Access List already exists Cannot copy qbdef From Access List does not exist Invalid "to" access list name Page 66 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security del acl-ip (name) Description Allows the user to delete an IP Access Control List by identifying its name. Note: The user can only delete a list name that is not in use. User Privilege Level: Admin Required Parameters: name This is the name of the Access Control List. All rules for managing filters will be apart of this list for a vlan member. The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message This will delete the entire contents of the IP ACL. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> del acl-ip charlie This will delete the entire contents of the IP ACL. Do you want to continue? y|n >y Command completed successfully Error Codes Access Control List does not exist Access List is in use Cannot modify qbdef entry Page 67 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security del acl-mac (name) Description Allows the user to delete a MAC Access Control List by identifying its name. Note: The user can only delete a list name that is not in use. User Privilege Level: Admin Required Parameters: name This is the name of the Access Control List. All rules for managing filters will be apart of this list for a vlan member. The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message This will delete the entire contents of the MAC ACL. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> del acl-mac alpha This will delete the entire contents of the MAC ACL. Do you want to continue? y|n >y Command completed successfully Error Codes Access Control List does not exist Cannot modify qbdef entry Access List is in use Page 68 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security del rule acl-ip (aclname) rule (rule number) Description The user can delete a rule from an IP Access Control List that is not in use. User Privilege Level: Admin Required Parameters: rule rule number Rule numbers are from 1-100. They are integer numbers. Rule numbers must be unique and cannot be repeated in the same list. aclname The name of the Access Control List that the user wants to manage. It can be up to 20 characters in length including alphanumeric, "-" (dash), and "_" (underscore) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del rule acl-ip alpha rule 3 Command completed successfully Error Codes Access Control List does not exist Rule id does not exist Invalid rule number Access List is in use Cannot modify qbdef entry Page 69 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security del rule acl-mac (aclname) rule (rule number) Description The user can delete a rule from a MAC Access Control List that is not in use. User Privilege Level: Admin Required Parameters: rule rule number Rule numbers are from 1-100. They are integer numbers. Rule numbers must be unique and cannot be repeated in the same list. aclname The name of the Access Control List that the user wants to manage. It can be up to 20 characters in length including alphanumeric, "-" (dash), and "_" (underscore) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del rule acl-mac alpha rule 3 Command completed successfully Error Codes Access Control List does not exist Rule id does not exist Invalid rule number Cannot modify qbdef entry Access List is in use Page 70 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security insert rule acl-ip (aclname) rule (rule number) action ({permit | deny}) outer-vlan (vlanid) src-ip ({ipaddress | any}) src-mask (mask) dest-ip ({ipaddress | any}) dest-mask (mask) src-port (tcpudpportvalue) dest-port (tcpudpportvalue) protocol (value) rate (rate-kbps) new-pbit (value) comment (acl-comment) Description Insert command will insert the rule into the ACL at the specified location based on the rule number. If there is a conflict (a rule already exists with the specified rule number), the existing rule will be modified to change the rule number to one greater. This change could result in a conflict with the next rule, so, the same process (increasing the rule number by one for the existing rules) will be continued until there is no more conflict If an optional attribute is not provided, defaults will be populated in the rule definition in the database. User Privilege Level: Admin Required Parameters: rule number rule Rule numbers are from 1-100. They are integer numbers. Rule numbers must be unique and cannot be repeated in the same list. aclname The name of the Access Control List that the user wants to manage. It can be up to 20 characters in length including alphanumeric, "-" (dash), and "_" (underscore) {permit | deny} action Used for ACLs to deny or permit traffic flow Optional Parameters: {ipaddress | any} src-ip Every client, server and network device must have a unique IP Address for each network connection (network interface). Every IP packet contains a source IP address and a destination IP address. dest-mask mask IP Destination Mask src-port tcpudpportvalue The Source TCP/UDP Port is an integer in the range {1-65535} or the value "any", which indicates any port (e.g. a wildcard). - Well known ports are in the range {1-1023} - Registered ports are in the range {1024 - 49151} - Dynamic/Private ports are in the range {49152 - 65535} Page 71 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security dest-port tcpudpportvalue The Destination TCP/UDP Port is an integer in the range {1-65535} or the value "any", which indicates any port (e.g. a wildcard). - Well known ports are in the range {1-1023} - Registered ports are in the range {1024 - 49151} - Dynamic/Private ports are in the range {49152 - 65535} rate-kbps rate Rate takes one of the following values: - An integer in the range {64 - 10,000,000} kbits/second, or - "any" which indicates no rate limit (e.g. a wildcard). comment acl-comment The comment field may be up to 80 characters in length, including alphanumeric characters, plus the following special characters: "-" (dash), "_" (underscore) "/" (forward-slash) src-mask mask The IP source mask dest-ip {ipaddress | any} Every client, server and network device must have a unique IP Address for each network connection (network interface). Every IP packet contains a source IP address and a destination IP address. protocol value The Layer 4 Protocol, takes one of the following values: - an integer in the range {0-254} - "any", which indicates any protocol (e.g. a wildcard) Some commonly used values are: - ICMP: 1 - IGMP: 2 - TCP: 6 - UDP: 17 new-pbit value The new P-Bit indicates the new value to mark packets with before forwarding. Pbit is an integer value in the range {0-7} or the value "any". outer-vlan vlanid The ingress outer VLAN ID. Takes one of the following values: - an integer value in the range {0-4094}, where 0 = priority tagged - untagged - any: which indicates any value (i.e. a wildcard match, including vlan tagged, priority tagged and untagged Default Values Page 72 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Rule and Action are required. outer-vlan: any src-ip: any src-mask: 0.0.0.0 dest-ip: any dest-mask: 0.0.0.0 src-port: any dest-port: any protocol: any rate: any newpbit: na (not applicable) comment: none Confirmation Message Command completed successfully Example(s) Example 1: (filter by ingress VLAN ID and source and destination IP address/mask) AXS2200> insert rule acl-ip alpha rule 1 action permit outer-vlan 10 src-ip 123.12.12.1 src-mask 255.255.255.0 dest-ip 10.10.10.0 dest-mask 255.255.255.0 comment filter_by_vlan_src_and_dest Command completed successfully Example 2: (filter by protocol and rate limit) AXS2200> insert acl-ip beta rule 20 action permit protocol 2 rate 1000 Command completed successfully Example 3: (filter by source IP and set p-bit) AXS2200> insert acl-ip gamma rule 30 action permit src-ip 196.68.1.1 src-mask 255.255.255.0 new-pbit 7 Command completed successfully Page 73 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Error Codes Invalid comment Invalid destination TCP/UDP port Invalid New P-Bit Invalid protocol Invalid rate Invalid source TCP/UDP port Invalid VLAN id Access List New P-bit requires that action is set to permit Access List Rate requires that action is set to permit Access List duplicate rules in the same ACL are not permitted ACL - mask must be all zeroes when address is any, and vice versa ACL - to set port filter, protocol must be either 6 (TCP) or 17 (UDP) Invalid rule number Access rule limit exceeded Access List is in use Access List source IP address is invalid Access List source mask is invalid Access list destination IP address invalid Access list destination IP mask invalid Access Control List does not exist Page 74 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security insert rule acl-mac (aclname) rule (rule number) action ({permit | deny}) outer-vlan (vlanid) src-mac ({macaddress | any}) src-macmask (mask) dest-mac ({macaddress | any}) dest-macmask (mask) ethertype (hexvalue) pbit (value) new-pbit (value) comment (acl-comment) Description Insert command will insert the rule into the ACL at the specified location based on the rule number. If there is a conflict (a rule already exists with the specified rule number), the existing rule will be modified to change the rule number to one greater. This change could result in a conflict with the next rule, so, the same process (increasing the rule number by one for the existing rules) will be continued until there is no more conflict. User Privilege Level: Admin Required Parameters: aclname The name of the Access Control List that the user wants to manage. It can be up to 20 characters in length including alphanumeric, "-" (dash), and "_" (underscore) {permit | deny} action Used for ACLs to deny or permit traffic flow rule number rule Rule numbers are from 1-100. They are integer numbers. Rule numbers must be unique and cannot be repeated in the same list. Optional Parameters: src-mac {macaddress | any} the source MAC Address. src-macmask mask The Source MAC Address mask takes the format yy-yy-yy-yy-yy-yy. Each value y is a hexadecimal number where each bit value is defined as: 1 = require a match 0 = wildcard (no match required) Note: each hexadecimal character represents 4 bits. Example: 0xF = 1111 in binary (4 bits) Example: FF-FF-FF-00-00-00 will require a match for the first 6 hexadecimal values (i.e. 24 bits) in the MAC address dest-mac {macaddress | any} The destination MAC address represented by 6 hexidecimal octets Page 75 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security separated by dashes. For example: 00-00-00-00-00-00 dest-macmask mask The Destination MAC Address mask takes the format yy-yy-yy-yy-yy-yy. Each value y is a hexadecimal number where each bit value is defined as: 1 = require a match 0 = wildcard (no match required) Note: each hexadecimal character represents 4 bits. Example: 0xF = 1111 in binary (4 bits) Example: FF-FF-FF-00-00-00 will require a match for the first 6 hexadecimal values (i.e. 24 bits) in the MAC address pbit value Pbit is an integer value in the range {0-7} or the value "any". new-pbit value The new P-Bit indicates the new value to mark packets with before forwarding. Pbit is an integer value in the range {0-7} or the value "any". comment acl-comment The comment field may be up to 80 characters in length, including alphanumeric characters, plus the following special characters: "-" (dash), "_" (underscore) "/" (forward-slash) outer-vlan vlanid The ingress outer VLAN ID. Takes one of the following values: - an integer value in the range {0-4094}, where 0 = priority tagged - untagged - any: which indicates any value (i.e. a wildcard match, including vlan tagged, priority tagged and untagged ethertype hexvalue Ethertype is a 4 digit hexadecimal value preceded by a "0x" in the range {0x0600 - 0xFFFF}, or "any", which indicates any Ethertype value (e.g. a wildcard) Default Values outer-vlan: any src-mac: any src-macmask 00-00-00-00-00-00 dest-mac: any dest-macmask: 00-00-00-00-00-00 ethertype: any pbit: any newpbit: na comment: null Confirmation Message Command completed successfully Page 76 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Example(s) Example 1: AXS2200> insert rule acl-mac alpha rule 1 action permit dest-mac 00-A0-C9-14-C8-29 src-mac any comment bbt-3-02-08-COxyzyerddd Command completed successfully Example 2: (mark new P-Bits based upon ethertype) AXS2200> insert acl alpha rule 10 action permit ethertype 0x0806 new-pbit 3 Command completed successfully Example 3: (mark new P-Bits based upon ingress vlan) AXS2200> insert acl alpha rule 10 action permit outer-vlan 10 new-pbit 4 Command completed successfully Error Codes ACL - mask must be all zeroes when address is any, and vice versa Invalid comment Invalid destination mac address mask Invalid Ethertype Invalid New P-Bit Invalid source mac address mask Invalid VLAN id Access List New P-bit requires that action is set to permit Access List duplicate rules in the same ACL are not permitted Access Control List does not exist Invalid P-bit Invalid rule number Access List is in use Access rule limit exceeded Access List source MAC address is invalid Access List destination MAC address invalid ACL - P-Bit must be any when outer-vlan is untagged Page 77 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set acl-ip (name) Description Allows the user to create an IP Access Control List to control packet movement through one or more ports. The system shall deliberately change all character values in the ACL name to upper case when displaying the name to the user. User Privilege Level: Admin Required Parameters: name This is the name of the Access Control List. All rules for managing filters will be apart of this list for a vlan member. The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set acl-ip alpha Command completed successfully Error Codes Maximum number of ACLs defined Invalid name Access Control List exists Page 78 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set acl-mac (name) Description Allows the user to create a MAC Access Control List to control packet movement through one or more ports. The system shall deliberately change all character values in the ACL name to upper case when displaying the name to the user. User Privilege Level: Admin Required Parameters: name This is the name of the Access Control List. All rules for managing filters will be apart of this list for a vlan member. The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message Command completed successfully Example(s) Example 1: Set up initial MAC list AXS2200> set acl-mac alpha Command completed successfully Error Codes Maximum number of ACLs defined Invalid name Access Control List exists Page 79 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set lagroup-config (lagaddress) acl-ip (name) Description Allows the user to configure an IP layer access control list. Every ingress packet from the WAN to the Link Aggregation group will be subjected to the rules defined in the IP ACL, and either forwarded or dropped. Service may be momentarily affected while the new ACL is applied. To remove an existing non-default ACL from the Link Aggregation Group and thereby forward all incoming packets without subjecting them to ACL treatment, assign the default ACL-IP name "qbdef". User Privilege Level: Superuser Required Parameters: acl-ip name The name of the IP ACL lagaddress Indicates the Link Aggregation Group address. The format is: lag-index where index takes a value from 1 to 128 Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200>set lagroup-config lag-1 acl-ip alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully. Example 2: (reset to default) AXS2200>set lagroup-config lag-1 acl-ip qbdef This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully. Page 80 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Error Codes ACL outer-vlan value is out of the range supported by the Port/LAGroup Access Control List does not exist Access rule limit exceeded Invalid interface Access Control List has no rules Page 81 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set lagroup-config (lagaddress) acl-mac (name) Description Allows the user to configure a MAC layer access control list. Every ingress packet from the WAN to the Link Aggregation group will be subjected to the rules defined in the MAC ACL, and either forwarded or dropped. Service may be momentarily affected while the new ACL is applied. To remove an existing non-default ACL from the Link Aggregation Group and thereby forward all incoming packets without subjecting them to ACL treatment, assign the default ACL-MAC name "qbdef". User Privilege Level: Superuser Required Parameters: acl-mac name The name of the MAC ACL lagaddress Indicates the Link Aggregation Group address. The format is: lag-index where index takes a value from 1 to 128 Default Values bmc-rate = 500 Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200>set lagroup-config lag-1 acl-mac alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully. Example 2: (reset to default) AXS2200>set lagroup-config lag-1 acl-mac qbdef This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully. Page 82 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Error Codes Access Control List does not exist Access rule limit exceeded Invalid interface Access Control List has no rules ACL outer-vlan value is out of the range supported by the Port/LAGroup Page 83 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set lagroup-config (lagaddress) bmc-rate (ratewanlag) Description This command allows a user to configure a maximum rate in packets per second (pps) that the system will allow receiving Broadcast and unknown unicast packets on the OLT Link Aggregation Group. If the bmc-rate is set to a value that is higher than the member port's capabilities, then effectively there is no rate limit imposed. For example, when a value greater than 1,488,100 pps is configured for a Link Aggregation Group that has 1GbE member ports. To change the setting, the Link Aggregation Group must be disabled. User Privilege Level: Superuser Required Parameters: bmc-rate ratewanlag Sets the rate limit in packets per second for broadcast and unknown unicast traffic. The range is {chassis-bmc-rate, 0, 1-14,880,952}. 0 will disable the rate limiting. Note that a 1GbE port can only support rate limiting up to 1,488,100 pps. Any value above this will effectively disable rate limiting. lagaddress Indicates the Link Aggregation Group address. The format is: lag-index where index takes a value from 1 to 128 Default Values bmc-rate = chassis-bmc-rate Confirmation Message This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200>set lagroup-config lag-1 bmc-rate 1200 This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully. Error Codes Invalid bmc-rate Invalid interface At least one attribute is required to be set Page 84 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port enet (ontenetaddress) acl-ip (name) Description Allows the user to apply an IP layer Access Control List to the ONT ethernet port. To remove an IP layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: acl-ip name The name of the IP ACL enet ontenetaddress Specifies the ONT Ethernet port address. It takes the following format:, - oltslot-port-channel-enet-index (e.g. au-3-4-16-enet-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-1-enet-1 acl-ip alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Page 85 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Error Codes Access Control List does not exist Access rule limit exceeded ACL Layer 4 Protocol not supported by port ACL New P-Bit is not supported by the Port ACL TCP/UDP Port filters are not supported by the port Invalid port ONT does not support this functionality ACL Rate not supported by port ACL outer-vlan cannot be set to any for action=permit ACL - IP ACL cannot be supported when VLAN translation are configured on the ONT Page 86 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port enet (ontenetaddress) acl-mac (name) Description Allows the user to apply a MAC layer Access Control List to the ONT ethernet port. To remove a MAC layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: ontenetaddress enet Specifies the ONT Ethernet port address. It takes the following format:, - oltslot-port-channel-enet-index (e.g. au-3-4-16-enet-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) acl-mac name The name of the MAC ACL Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-1-enet-1 acl-mac alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Page 87 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Error Codes Access Control List does not exist Access rule limit exceeded Invalid port ACL outer-vlan is not supported by the port ACL MAC address mask must be FF-FF-FF-FF-FF-FF for this ONT platform ACL Ethertype is not supported by the Port ACL New P-Bit is not supported by the Port ACL P-Bit filtering is not supported by the Port/LAGroup ACL outer-vlan cannot be set to any for action=permit Page 88 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port hcna (onthcnaaddress) acl-ip (name) Description Allows the user to apply an IP layer Access Control List to the ONT HCNA port. To remove an IP layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: acl-ip name The name of the IP ACL hcna onthcnaaddress Specifies the ONT HCNA port address. It takes the following format: - oltslot-port-channel-hcna-index (e.g. au-5-1-16-hcna-1) Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-1-hcna-1 acl-ip alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes Access Control List does not exist Access rule limit exceeded Invalid port ACL Layer 4 Protocol not supported by port ACL New P-Bit is not supported by the Port ACL P-Bit filtering is not supported by the Port/LAGroup ACL Rate not supported by port ACL TCP/UDP Port filters are not supported by the port ACL outer-vlan cannot be set to any for action=permit Page 89 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port hcna (onthcnaaddress) acl-mac (name) Description Allows the user to apply a MAC layer Access Control List to the ONT HCNA port. To remove a MAC layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: onthcnaaddress hcna Specifies the ONT HCNA port address. It takes the following format: - oltslot-port-channel-hcna-index (e.g. au-5-1-16-hcna-1) acl-mac name The name of the MAC ACL Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-1-hcna-1 acl-mac alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes ACL Ethertype is not supported by the Port ACL New P-Bit is not supported by the Port Access Control List does not exist Access rule limit exceeded Invalid port ACL P-Bit filtering is not supported by the Port/LAGroup ACL outer-vlan cannot be set to any for action=permit Page 90 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port pon (ontponaddress) acl-ip (name) Description Allows the user to apply an IP layer Access Control List to the ONT PON port. To remove an IP layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: acl-ip name The name of the IP ACL pon ontponaddress Specifies the ONT PON port address. It takes the following format:, - oltslot-port-channel-pon-index (e.g. au-3-4-16-pon-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port pon au-5-1-1-pon-1 acl-ip alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes Access Control List does not exist Access rule limit exceeded Invalid port ONT does not support this functionality ACL Rate not supported by port ACL outer-vlan cannot be set to any for action=permit ACL - IP ACL cannot be supported when VLAN translation are configured on the ONT Page 91 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port pon (ontponaddress) acl-mac (name) Description Allows the user to apply a MAC layer Access Control List to the ONT PON port. To remove a MAC layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: ontponaddress pon Specifies the ONT PON port address. It takes the following format:, - oltslot-port-channel-pon-index (e.g. au-3-4-16-pon-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) acl-mac name The name of the MAC ACL Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port pon au-5-1-1-pon-1 acl-mac alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes Access Control List does not exist Access rule limit exceeded Invalid port ONT does not support this functionality ACL outer-vlan cannot be set to any for action=permit Page 92 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port vdsl (ontvdsladdress) acl-ip (name) Description Allows the user to apply an IP layer Access Control List to the ONT VDSL2 port. To remove a IP layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: vdsl ontvdsladdress Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) acl-ip name The name of the IP ACL Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-1-vdsl-1 acl-ip alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes Access Control List does not exist Access rule limit exceeded Invalid port ONT does not support this functionality Page 93 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set ont port vdsl (ontvdsladdress) acl-mac (name) Description Allows the user to apply a MAC layer Access Control List to the ONT VDSL2 port. To remove a MAC layer Access Control List from the port, apply the default ACL named qbdef. User Privilege Level: Admin Required Parameters: name acl-mac The name of the MAC ACL vdsl ontvdsladdress Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-1-vdsl-1 acl-mac alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes Access Control List does not exist Access rule limit exceeded Invalid port ONT does not support this functionality Page 94 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set port gige (gigeport) bmc-rate (ratewanport) Description This command allows a user to configure a maximum rate in packets per second (pps) that the system will allow receiving Broadcast and unknown unicast packets on the OLT GbE/10GbE port. User Privilege Level: Admin Required Parameters: bmc-rate ratewanport Sets the rate limit in packets per second for broadcast and unknown unicast traffic. The range for 1GbE ports is {chassis-bmc-rate, 0, 1-1,488,100}. The range for 10GbE ports is {chassis-bmc-rate, 0, 1-14,880,952}. 0 will disable the rate limiting. gige gigeport Provision the gige port for Broadcast and Multicast rate limiting Default Values bmc-rate = chassis-bmc-rate Confirmation Message This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200> set port gige sw-a-1 bmc-rate 500 This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully. Example 2 (gige port on Ethernet card): AXS2200> set port gige au-11-1 bmc-rate 500 This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully. Page 95 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Error Codes Invalid, port belongs to LAGroup Invalid bmc-rate Invalid port Page 96 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set port gige (slot-port) acl-ip (name) Description Used to configure an IP layer Access Control List to the GigE port. To remove an IP layer Access Control List from the port, apply the default ACL named qbdef to the port. User Privilege Level: Admin Required Parameters: acl-ip name The name of the IP ACL gige slot-port Identifies the GigE port. Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port gige sw-b-1 acl-ip alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes Access Control List does not exist Access rule limit exceeded Invalid, port belongs to LAGroup ACL outer-vlan value is out of the range supported by the Port/LAGroup Access Control List has no rules Invalid port Invalid slot Page 97 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set port gige (slot-port) acl-mac (name) Description Used to configure a MAC layer Access Control List to the GigE port. To remove an IP layer Access Control List from the port, apply the default ACL named qbdef to the port. User Privilege Level: Admin Required Parameters: name acl-mac The name of the MAC ACL gige slot-port Identifies the GigE port. Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port gige sw-b-1 acl-mac alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes ACL outer-vlan value is out of the range supported by the Port/LAGroup Access Control List does not exist Access rule limit exceeded Invalid port Invalid slot Invalid, port belongs to LAGroup Access Control List has no rules Page 98 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set port pon (slot-port) acl-ip (name) Description Used to configure an IP layer Access Control List to the GPON port. To remove an IP layer Access Control List from the port, apply the default ACL named qbdef to the port. User Privilege Level: Admin Required Parameters: pon slot-port Identifies the PON by the OLT card port address. acl-ip name The name of the IP ACL Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port pon au-5-1 acl-ip alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes ACL outer-vlan value is out of the range supported by the Port/LAGroup Access Control List does not exist Access rule limit exceeded Invalid port Invalid slot Access Control List has no rules PON port is secondary - use primary PON port address Page 99 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set port pon (slot-port) acl-mac (name) Description Used to configure a MAC layer Access Control List to the GPON port. To remove a MAC layer Access Control List from the port, apply the default ACL named qbdef to the port. User Privilege Level: Admin Required Parameters: slot-port pon Identifies the PON by the OLT card port address. acl-mac name The name of the MAC ACL Default Values none Confirmation Message This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port pon au-5-1 acl-mac alpha This assigns a new ACL, which will momentarily disrupt service. Do you want to continue? y | n >y Command completed successfully Error Codes Access Control List does not exist Access rule limit exceeded Invalid port Invalid slot ACL outer-vlan value is out of the range supported by the Port/LAGroup Access Control List has no rules PON port is secondary - use primary PON port address Page 100 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security set port pon (slot-port) bmc-rate (bmcrate) Description This command allows a user to configure a maximum rate limit in packets per second (pps) for forwarding Broadcast, Multicast and Unknown Unicast packets received at the GPON port in the upstream direction. User Privilege Level: Admin Required Parameters: pon slot-port Identifies the PON by the OLT card port address. bmc-rate bmcrate The rate limit for multicast, broadcast and unknown unicast packet forwarding, in packets per second. The range is {chassis-bmc-rate, 0, 1-2,441,406}, where 0 indicates no limit is imposed. Default Values bmc-rate = chassis-bmc-rate Confirmation Message This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200> set port pon au-5-1 bmc-rate 500 This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully. Error Codes Invalid port Invalid bmc-rate PON port is secondary - use primary PON port address Page 101 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security show acl-ip name (list) Description Displays the contents of an IP layer Access Control List. When no specific name is provided, a list of all IP layer ACLs will be shown, along with a status indicator of whether each is in use or not in use. When a specific name is provided, all the rules will be reported for that ACL. User Privilege Level: Admin Optional Parameters: name list Name for Access Control List Default Values none (If no name is provided, a summary report is shown) Confirmation Message Command completed successfully Example(s) Example 1: (summary report) AXS2200> show acl-ip =============================================================================== IP ACL Summary Report DATE: 8/13/2005 TIME: 20:15:40 =============================================================================== Name -------------------qbdef* ALPHA BETA GAMMA OMEGA In Use Status ---------yes yes no yes no =============================================================================== Command completed successfully Example 2: (individual ACL report) AXS2200> show acl-ip name alpha =============================================================================== IP ACL Report DATE: 8/13/2010 TIME: 20:15:40 ============================================================================= Name: ALPHA In Use Status: yes Rule: 10 Action: deny Outer VLAN: 10 Source IP Address: 172.68.1.1 Page 102 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Source IP Mask: 255.255.0.0 Destination IP Address: any Destination IP Mask: 0.0.0.0 Source TCP/UDP Port: any Destination TCP/UDP Port: any Layer 4 Protocol: any Rate: any New P-Bit: na Comment: deny-packets-from-172-68-0-0-vid-10 Rule: 20 Action: deny Outer VLAN: any Source IP Address: any Source IP Mask: 0.0.0.0 Destination IP Address: 222.55.1.1 Destination IP Mask: 255.255.0.0 Source TCP/UDP Port: any Destination TCP/UDP Port: any Layer 4 Protocol: any Rate: any New P-Bit: na Comment: deny-packets-to-222-55-0-0-any-vid Rule: 30 Action: permit Outer VLAN: any Source IP Address: any Source IP Mask: 0.0.0.0 Destination IP Address: any Destination IP Mask: 0.0.0.0 Source TCP/UDP Port: any Destination TCP/UDP Port: any Layer 4 Protocol: any Rate: any New P-Bit: na Comment: permit-all =============================================================================== Command completed successfully Example 3: (default qbdef ACL report) AXS2200> show acl-ip name qbdef =============================================================================== IP ACL Report DATE: 8/13/2010 TIME: 20:15:40 ============================================================================= Name: qbdef In Use Status: no Rule: none =============================================================================== Command completed successfully Example 4: (individual ACL report) AXS2200> show acl-ip name alpha =============================================================================== IP ACL Report DATE: 8/13/2010 TIME: 20:15:40 ============================================================================= Name: ALPHA In Use Status: yes Page 103 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Rule: 10 Action: permit Outer VLAN: untagged Source IP Address: any Source IP Mask: 0.0.0.0 Destination IP Address: any Destination IP Mask: 0.0.0.0 Source TCP/UDP Port: any Destination TCP/UDP Port: any Layer 4 Protocol: any Rate: any New P-Bit: na Comment: permit_all_untagged_packets Rule: 99 Action: deny Outer VLAN: any Source IP Address: any Source IP Mask: 0.0.0.0 Destination IP Address: any Destination IP Mask: 0.0.0.0 Source TCP/UDP Port: any Destination TCP/UDP Port: any Layer 4 Protocol: any Rate: any New P-Bit: na Comment: deny_remaining_packets =============================================================================== Command completed successfully Error Codes Access Control List does not exist Page 104 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security show acl-mac name (list) Description Displays the contents of a MAC layer Access Control List. When no specific name is provided, a list of all MAC layer ACLs will be shown, along with a status indicator of whether each is in use or not in use. When a specific name is provided, all the rules will be reported for that ACL. User Privilege Level: Admin Optional Parameters: name list Name for Access Control List Default Values none (If no name is provided, a summary report is shown) Confirmation Message Command completed successfully Example(s) Example 1: (summary report) AXS2200> show acl-mac =============================================================================== MAC ACL Summary Report DATE: 8/13/2005 TIME: 20:15:40 =============================================================================== Name -------------------qbdef* ALPHA BETA GAMMA OMEGA In Use Status ---------yes yes no yes no =============================================================================== Command completed successfully Example 2: (individual ACL report) AXS2200> show acl-mac name alpha =============================================================================== MAC ACL Report DATE: 8/13/2010 TIME: 20:15:40 ============================================================================= Name: ALPHA In Use Status: yes Rule: 1 Action: deny Outer VLAN: 10 Source MAC Address: 33-5A-6F-92-11-00 Page 105 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Source MAC Mask: FF-FF-FF-FF-FF-FF Destination MAC Address: any Destination MAC Mask: 00-00-00-00-00-00 Ethertype: any P-Bit: any New P-Bit: na Comment: deny-source-mac-33-5A-6F-92-11-00 Rule: 2 Action: permit Outer VLAN: any Source MAC Address: any Source MAC Mask: 00-00-00-00-00-00 Destination MAC Address: any Destination MAC Mask: 00-00-00-00-00 Ethertype: 0x0800 P-Bit: any New P-Bit: 5 Comment: permit-and-remark-incoming-ipv4-ethertype-to-priority-5 Rule: 3 Action: permit Outer VLAN: any Source MAC Address: any Source MAC Mask: 00-00-00-00-00-00 Destination MAC Address: any Destination MAC Mask: 00-00-00-00-00-00 Ethertype: any P-Bit: any New P-Bit: na Comment: permit-all =============================================================================== Command completed successfully Example 3: (default qbdef ACL report) AXS2200> show acl-ip name qbdef =============================================================================== MAC ACL Report DATE: 8/13/2010 TIME: 20:15:40 ============================================================================= Name: qbdef In Use Status: no Rule: none =============================================================================== Command completed successfully Example 4: (individual ACL report) AXS2200> show acl-mac name alpha =============================================================================== MAC ACL Report DATE: 8/13/2010 TIME: 20:15:40 ============================================================================= Name: ALPHA In Use Status: yes Rule: 10 Action: permit Outer VLAN: 0 Source MAC Address: 5F-23-00-1A-33-6B Source MAC Mask: FF-FF-FF-FF-FF-FF Page 106 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Data Plane Security Destination MAC Address: any Destination MAC Mask: 00-00-00-00-00-00 Ethertype: any P-Bit: any New P-Bit: na Comment: permit-priority-tagged_Packets_from-5F-23-00-1A-33-6B Rule: 20 Action: deny Outer VLAN: untagged Source MAC Address: any Source MAC Mask: 00-00-00-00-00-00 Destination MAC Address: any Destination MAC Mask: 00-00-00-00-00 Ethertype: 0x0800 P-Bit: any New P-Bit: 5 Comment: deny_untagged_packets Rule: 99 Action: permit Outer VLAN: any Source MAC Address: any Source MAC Mask: 00-00-00-00-00-00 Destination MAC Address: any Destination MAC Mask: 00-00-00-00-00-00 Ethertype: any P-Bit: any New P-Bit: na Comment: permit_all_packets =============================================================================== Command completed successfully Error Codes Access Control List does not exist Page 107 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 108 Data Plane Security AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Database Administration Database Administration audit database Description This command forces the system to scan and compare the database in RAM with the database in the non-volatile memory on the system controller card to ensure the files match. Responses will be one of the following: - "DB reports all tables valid" (audit passed successfully) - "DB reports <number> tables invalid" (audit failed for part of the database) - "DB Verify Failed (audit failed) If the audit indicates invalid or failed response, the user should perform the flush database command. This will ensure database integrity, which is integral to proper system operations. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> audit database DB reports all tables valid Command completed successfully Error Codes Page 109 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Database Administration flush database Description This command is used to ensure that the database in the non-volatile memory of the system controller card matches the database currently running in RAM. Once executed, the system deletes the database file in NVM and replaces it with a copy of the database in RAM. User Privilege Level: Superuser Default Values None Confirmation Message DB Flush has been requested (can take several minutes). Command completed successfully Example(s) Example 1: AXS2200> flush database DB Flush has been requested (can take several minutes). Command completed successfully Error Codes Page 110 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Database Administration init database Description Re-initializes the OLT database for the currently active and accepted software version. If the running software version is not accepted, the command will be denied. User Privilege Level: Superuser Default Values None Confirmation Message Warning, this command will reset provisioning to factory default settings. Do you want to proceed? y | n Example(s) Example 1: AXS2200> init database Warning, this command will reset provisioning to factory default settings. Do you want to proceed? y|n > y Command completed successfully Error Codes Image not accepted Invalid response Page 111 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 112 Database Administration AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA DHCP DHCP set chassis dhcp-relay ({enable | disable}) Description Enable/disable DHCP Relay Agent on the chassis. When enabled, the L2 DHCP Relay Agent function will be performaned for all ONT ports except those belonging to a TLS VLAN. User Privilege Level: Superuser Required Parameters: dhcp-relay {enable | disable} set dhcp relay-agent adminState Default Values default is "disable" if the command is not issued. Confirmation Message This will change the administrative status of dhcp-relay. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis dhcp-relay enable This will change the administrative status of dhcp-relay. Do you want to continue? y | n >y Command completed successfully Error Codes Page 113 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA DHCP show ont dhcp-binding (ontaddress) Description The command displays the following DHCP bindings snooped at ONT: - IP address of DHCP clients - MAC address of DHCP clients - ONT port, SVID (and CVID) - Expire time (in seconds) Note: in R6.2, in case of single-tag VLAN, it will display all snooped dhcp sessions without distinguishing which data ports they are associated with. In R7.2, it displays ONT port information for both single-tag and double-tag VLAN members (except for single-tag VLAN members residing on ONT6000GVT or ONT1400GT/GTI) for a DHCP binding. It also displays the bindings for VOIP or E.H248 endpoints, with or without specific port information. User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show ont dhcp-binding au-14-1-2 =============================================================================== DHCP Binding Report DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== IP Address MAC Address SVID CVID Port Expire (sec) ----------------------------------- ------ ------- ---------193.1.2.1 00-10-A4-B7-AC-F2 16 15 enet-2 600 193.1.2.2 00-10-A4-B7-AC-F3 16 16 moca-1 588 =============================================================================== Command completed successfully Example 2: AXS2200> show ont dhcp-binding au-14-1-2 =============================================================================== DHCP Bindig Report DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== IP Address ------------193.1.2.1 193.1.2.2 Page 114 MAC Address ----------------00-10-A4-B7-AC-F2 00-10-A4-B7-AC-F3 SVID ------16 16 CVID -----15 16 Port ------enet-2 moca-1 AXS2200 OLT Expire (sec) ---------600 588 R7.4 CLI Reference Guide MOTOROLA DHCP 193.1.3.1 00-10-A4-B7-CC-F2 400 enet-1 600 193.1.3.2 00-10-A4-B7-CC-F3 500 enet-1 567 193.1.4.1 00-00-00-00-00-AA 500 voip 568 =============================================================================== Command completed successfully Example 3 (binding on GVT): AXS2200> show ont dhcp-binding au-14-1-3 =============================================================================== DHCP Bindig Report DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== IP Address MAC Address SVID CVID Port Expire (sec) ----------------------------------- ------ ------- ---------193.1.2.1 00-10-A4-B7-AC-F2 16 15 vdsl2-2 600 193.1.2.2 00-10-A4-B7-AC-F3 16 16 vdsl2-1 588 193.1.3.1 00-10-A4-B7-CC-F2 400 600 193.1.3.2 00-10-A4-B7-CC-F3 500 567 193.1.4.1 00-00-00-00-00-AA 500 568 =============================================================================== Command completed successfully Error Codes Invalid ONT No DHCP binding available DHCP relay-agent is not enabled Page 115 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA DHCP show stats ont dhcp-ra ({ontportaddress | ontaddress}) svid (svlanid) cvid (cvlanid) Description Displays statistics counters of DHCP Protocol messages snooped for an ONT member of a single or double-tag VLAN, or alternatively, displays aggregated statistics counters of DHCP messages obtained for an ONT and a single-tag VLAN. The latter applies only to the combination of ONT6000GVT or ONT1400GT/GTI and a single-tag VLAN, while the former applies to rest of ONT and VLAN combinations. The set of statistics counters include: - DHCP TOTAL IN PKTS: total upstream DHCP packets - DHCP DISCOVER: total DHCPDISCOVER packets - DHCP REQUEST: total DHCPREQUEST packets - DHCP DECLINE: total DHCPDECLINE packets - DHCP RELEASE: total DHCPRELEASE packets - DHCP INFORM: total DHCPINFORM packets - DHCP IN DISCARD: total upstream DHCP packets discarded, that contain option-82 or "giaddr". - DHCP DHCP DHCP DHCP DHCP TOTAL OUT PKTS: total downstream DHCP packets OFFER: total DHCPOFFER packets ACK: total DHCPACK packets NAK: total DHCPNAK packets OUT DISCARD: total downstream DHCP packets discarded, that contain un-recognized option-82. Note that DHCP statistics does not apply to TLS VLAN members. User Privilege Level: Operator Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. {ontportaddress | ontaddress} Specifies either an ONT port address, or an ONT address. ontportaddress: Indicates the ONT address for the data or voip/pots port in the format: oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - ontporttype (pots, enet, moca, voip, vdsl2) - index (1-n) ontaddress: Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) Page 116 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA DHCP - channel (the ONT channel on the PON) Optional Parameters: cvid cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200>show stats ont dhcp-ra au-14-1-2-enet-1 svid 16 =============================================================================== ONT DHCP STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 2 AID: au-14-1-2-enet-1 OLT PON Card: AGPONB ONT Operating Status: DHCP DHCP DHCP DHCP DHCP DHCP DHCP In Packets: 6 Discover: 3 Request: 1 Decline: 0 Release: 0 Inform: 25 In Discard: 0 DHCP DHCP DHCP DHCP DHCP Out Packets: 2 OFFER: 1 ACK: 1 NAK: 0 Out Discard: 0 active =============================================================================== Command completed successfully Example 2: AXS2200>show stats ont dhcp-ra au-14-1-2-voip svid 16 =============================================================================== ONT DHCP STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 2 AID: au-14-1-2-voip OLT PON Card: AGPONB ONT Operating Status: DHCP DHCP DHCP DHCP DHCP DHCP Page active In Packets: 6 Discover: 3 Request: 1 Decline: 0 Release: 0 Inform: 25 117 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA DHCP DHCP In Discard: 0 DHCP DHCP DHCP DHCP DHCP Out Packets: 2 OFFER: 1 ACK: 1 NAK: 0 Out Discard: 0 =============================================================================== Command completed successfully Example 3: AXS2200>show stats ont dhcp-ra au-14-1-2 svid 16 =============================================================================== ONT DHCP STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 2 AID: au-14-1-2 OLT PON Card: AGPONB ONT Operating Status: DHCP DHCP DHCP DHCP DHCP DHCP DHCP In Packets: 6 Discover: 3 Request: 1 Decline: 0 Release: 0 Inform: 25 In Discard: 0 DHCP DHCP DHCP DHCP DHCP Out Packets: 2 OFFER: 1 ACK: 1 NAK: 0 Out Discard: 0 active =============================================================================== Command completed successfully Error Codes Invalid AID VLAN member not found DHCP relay-agent is not enabled VLAN not found CVLAN ID required for double-tagged VLANs Invalid cvid Invalid svid VLAN - CVID not applicable for single-tagged VLANs Invalid equipment state for request ONT does not support this functionality Page 118 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 119 DHCP AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment Equipment clear slot (slot) Description Removes all configuration for the card that was formerly inserted into the slot. This command is executed when a new card will be deployed into a slot that was used for a different type of card in the past. The slot must be empty in order for this command to successfully complete. The execution of this command will result in the clearing of any "card removed" alarms for that slot, and all port provisionable values will return to default values. NOTE: Some provisioning must be deleted before this operation will succeed: - All connections for this slot must be deleted. - Any GR-303 Interface Groups must be deleted first. - The Protection card of a 1+1 protected pair must be removed, and the Protection slot cleared, before the Working slot can be cleared. - If this is an unprotected switch slot, the system timing mode must be set to either freerun or external or the command will fail. - If the card is a PON card, then all ONTs must be deleted first. - If the card is a PON card, then all ports must be removed from PON Protection groups first. - RSTP member ports or LAGs must be removed from the RSTP instance first Note: The active system controller slot cannot be cleared (although the standby can, if the standby card is physically removed from the shelf at the time the clear slot operation is attempted). Note: The switch slot sw-a cannot be cleared (although sw-b can, if its card is physically removed from the shelf at the time the clear slot operation is attempted). User Privilege Level: Superuser Required Parameters: slot Specifies the desired slot of the chassis. Default Values none Confirmation Message You have elected to clear a slot. Are you sure (y/n)? >y Command completed successfully Example(s) Example 1: AXS2200> clear slot au-3 You have elected to clear a slot. Are you sure (y/n)? Page 120 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment >y Command completed successfully Example 2: AXS2200> clear slot sw-b You have elected to clear a slot. Are you sure (y/n)? >y Command completed successfully Example 3: AXS2200> clear slot sys-b You have elected to clear a slot. Are you sure (y/n)? >y Command completed successfully Error Codes MEPs must first be deleted Invalid - delete ont(s) on PON card first Invalid - connections defined Interface Group is configured - delete first. Pack is still in slot Invalid timing mode Invalid to clear this slot Invalid - security-radius vlan exists Invalid, port belongs to LAGroup Invalid - Multicast VLAN(s) defined Invalid - RSTP members exist Invalid - PON Protection is configured Page 121 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment reset chassis ({sys-a | sys-b | all}) version ({version-id | current}) Description Allows the user to perform a reset of an individual system controller card, or all cards in the chassis. The reset chassis all option minimizes the overall reset time of all cards in the chassis, versus the reset chassis linecards command. Only a soft reset of the card occurs, which is not service affecting. If all is selected, then all service will be impacted during the reset itself. There are 3 different options for versions when resetting: 1. reset chassis {sys-a | sys-b | all} --> resets to accepted version (note that no version is provided) 2. reset chassis {sys-a | sys-b | all} version current --> resets all cards to the currently running version (regardless of whether it is accepted or not). Resets the standby/slave system controller card to the accepted version. 3. reset chassis {sys-a | sys-b | all} version <version-id> --> resets to specified version. Resets the standby/slave system controller card to the accepted version. NOTE: When the standby system controller card is reset using this command, it will always execute the same version of software that the master system controller is running. User Privilege Level: Operator Required Parameters: {sys-a | sys-b | all} Indicates the affected slots: sys-a - The system controller card in the slot sys-a sys-b - The system controller card in the slot sys-b all - All slots in the chassis. Optional Parameters: version {version-id | current} Specifies the desired software version: - version-id: indicates the directory name stored in the nonvolatile memory on the system controller. The version-id can take up to 14 characters in length. - "current"- indicates the currently running software version. Default Values Currently accepted version, if none specified Confirmation Message Are you sure? y | n (to confirm the command press the y key) Shutting down... (This is followed by the reset). (note: the system does not shut down for the linecards option) Example(s) Example 1: Page 122 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment AXS2200> reset chassis all version current Are you sure? >y y | n Shutting down... [RESET & CLI session terminated] Example 2: AXS2200> reset chassis all Are you sure? y | n >y Shutting down... [RESET & CLI session terminated] Example 3: AXS2200> reset chassis sys-a version r2_2_0 Are you sure? >y y | n Shutting down... [RESET & CLI session terminated] Error Codes Slot is empty Image not found in Version directory Image in Version directory not valid Upgrade already in progress Version not found Version not allowed Page 123 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment reset chassis (linecards) Description Allows the user to perform a reset of all linecards to the version of software running on the master system controller. This command is optimized for minimizing service outages (vs. reset chassis all which optimizes for minimizing the duration of the reset process). Note that unprotected service will be impacted during the reset operation. Use this command after resetting the master controller card to a new version. User Privilege Level: Operator Required Parameters: linecards Indicates all linecards in the chassis, including the switch cards. Does not include the system controllers. Default Values none Confirmation Message Are you sure? y | n (to confirm the command press the y key) Example(s) Example 1: AXS2200> reset chassis linecards Are you sure? >y y | n Command completed successfully Error Codes Upgrade already in progress Image not found in Version directory Image in Version directory not valid Version not found Version not allowed Invalid equipment state for request Page 124 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment reset slot (slot) Description Resets the card installed in the specified slot. Upon reboot, the card will use the currently running image of software being used by the system controller. User Privilege Level: Operator Required Parameters: slot Specifies the desired slot of the chassis. Default Values None Confirmation Message Are you sure? y | n Command completed successfully Example(s) Example 1: AXS2200> reset slot au-5 Are you sure? y|n >y Command completed successfully Error Codes Image not found in Version directory Version not found Upgrade already in progress Image in Version directory not valid Page 125 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment show eqpt Description Displays card equipment information for each OLT slot: Slot: Displays the slot names of the OLT. The term "bp" is used to indicate the chassis backplane. The term "fan" is used to indicate the fan tray. Card: Displays the name of the card expected in the slot. Part Number: Displays the Motorola part number for the expected card. BOM Rev: Displays the hardware revision of the expected board/card (BOM rev). This is the only parameter that applies to the backplane. Serial Number: Displays the Motorola serial number for the expected card. CLEI: Displays the Common Language Equipment Identification (CLEI) of the expected card. SW Ver: Displays the Software revision running in the card. Status: Displays the current slot/card operating status. The states are: empty = No card type is associated with this slot init = Card is booting up and recovering configuration data good = Card is operating properly and available to carry service swtufail = Card is experiencing a software failure during turnup swfail = Card is experiencing a software failure during normal operation swmm = software mismatch or incompatibility with the version on the master system controller hwfail = Card has suffered a hardware failure comfail = Card is experiencing a communication failure removed = Card has physically been removed from the shelf shutdown = Card is shutting down Note: The backplane reports only the hardware version in the BOM field; the other fields are not applicable for the backplane. Note: For the fan unit, the Firmware Version is reported in the Software Version column, and the Status column reports one of the following: good, hwfail or empty. User Privilege Level: Operator Default Values no default Confirmation Message Command completed successfully Example(s) Example 1: (original fan tray - ASYSA) AXS2200> show eqpt =============================================================================== EQUIPMENT Report DATE: 7/13/2005 TIME: 20:15:40 =============================================================================== Slot ----Page 126 Card Part BOM Serial CLEI SW Status Type Number Rev Number Ver ---------- ------------- --- ---------------- ---------- ------ -------AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA au-1 au-2 au-3 au-4 au-5 au-6 au-7 au-8 au-9 sw-a sw-b au-10 au-11 au-12 au-13 au-14 au-15 au-16 au-17 au-18 sys-a sys-b fan bp Equipment AVGC AVGC AGPONC AGPONC AGPONC AGPONC AGPONC ASW200D ASW200D AGPONC AGPONC AGPONC AGPONC AGPONC AGPONC AGPONC ASYSA FANTRAY - 531465-001-00 AA 531465-001-00 AA 532698-001-00 532698-001-00 532698-001-00 532698-001-00 532698-001-00 531454-001-00 531454-001-00 532698-001-00 532698-001-00 532698-001-00 532698-001-00 532698-001-00 532698-001-00 532698-001-00 AA AA AA AA AA AA AA AA AA AA AA AA AA AA 521865-001-00 AA 519863-003-00 01 01 A04NG10011601011 BVL3AA6GAA vx.y.z good A04NG10011601720 BVL3AA6GAA vx.y.z good empty empty A04NG10011600839 BVL290KAAA vx.y.z good A04NG10011600840 BVL290KAAA vx.y.z good A04NG10011600841 BVL290KAAA removed A04NG10011600840 BVL290KAAA vx.y.z good A04NG10011600840 BVL290KAAA vx.y.z good A04NG10011600834 BVC1AAMCAA vx.y.z good A04NG10011600837 BVC1AAMCAA vx.y.z good A04NG10011600833 BVL290KAAA vx.y.z good A04NG10011600833 BVL290KAAA vx.y.z good A04NG10011600833 BVL290KAAA vx.y.z good A04NG10011600832 BVL290KAAA vx.y.z good A04NG10011600833 BVL290KAAA vx.y.z good A04NG10011600839 BVL290KAAA vx.y.z good A04NG10011600840 BVL290KAAA vx.y.z good empty empty A04NG10011600842 BVCUD0ALAA vx.y.z good empty A04NG10011600111 BVC1AARCAA z good =============================================================================== Command completed successfully Example 2: (original fan tray - ASYSC in redundant configuration) AXS2200> show eqpt =============================================================================== EQUIPMENT Report DATE: 1/13/2008 TIME: 20:15:40 =============================================================================== Slot ----au-1 au-2 au-3 au-4 au-5 au-6 au-7 au-8 au-9 sw-a sw-b au-10 au-11 au-12 au-13 au-14 au-15 au-16 au-17 au-18 sys-a sys-b fan bp Card Type ---------AVGC AVGC AGPONC AGPONC AGPONC AGPONC AGPONC ASW200D ASW200D AGPONC AGPONC AGPOND AGPOND AGPOND AGPOND AGPOND ASYSC ASYSC FANTRAY - Part Number ------------531465-001-00 531465-001-00 BOM Rev --AA AA Serial Number ---------------A04NG10011601011 A04NG10011601720 CLEI Status 532698-001-00 532698-001-00 532698-001-00 532698-001-00 532698-001-00 531454-001-00 531454-001-00 532698-001-00 532698-001-00 547504-001-00 547504-001-00 547504-001-00 547504-001-00 547504-001-00 AA AA AA AA AA AA AA AA AA AA AA AA AA AA A04NG10011600839 A04NG10011600840 A04NG10011600841 A04NG10011600840 A04NG10011600840 A04NG10011600834 A04NG10011600837 A04NG10011600833 A04NG10011600833 A04NG10011600833 A04NG10011600832 A04NG10011600833 A04NG10011600839 A04NG10011600840 BVL290KAAA BVL290KAAA BVL290KAAA BVL290KAAA BVL290KAAA BVC1AAMCAA BVC1AAMCAA BVL290KAAA BVL290KAAA BVL290KAZZ BVL290KAZZ BVL290KAZZ BVL290KAZZ BVL290KAZZ -------good good empty empty good good removed good good good good good good good good good good good empty empty good good good 542640-001-00 AA 542640-001-00 AA 519863-003-00 01 01 SW Ver ---------- -----BVL3AA6GAA vx.y.z BVL3AA6GAA vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z A04NG10011600842 BVC1AA5CAA vx.y.z A04NG10011789982 BVC1AA5CAA vx.y.z A04NG10011600111 BVC1AARCAA z =============================================================================== Command completed successfully Example 3: Page 127 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment (original fan tray - ASYSD in redundant configuration, Ethernet Line Card in slot 10 -13) AXS2200> show eqpt =============================================================================== EQUIPMENT Report DATE: 1/13/2008 TIME: 20:15:40 =============================================================================== Slot ----au-1 au-2 au-3 au-4 au-5 au-6 au-7 au-8 au-9 sw-a sw-b au-10 au-11 au-12 au-13 au-14 au-15 au-16 au-17 au-18 sys-a sys-b fan bp Card Type ---------AVGC AVGC AGPOND AGPOND AGPOND AGPOND AGPOND ASW200D ASW200D AETHA AETHA AETHA AETHA AGPOND AGPOND AGPOND ASYSD ASYSD FANTRAY - Part Number ------------531465-001-00 531465-001-00 BOM Rev --AA AA Serial Number ---------------A04NG10011601011 A04NG10011601720 CLEI Status 547504-001-00 547504-001-00 547504-001-00 547504-001-00 547504-001-00 531454-001-00 531454-001-00 531454-001-00 531454-001-00 531454-001-00 531454-001-00 547504-001-00 547504-001-00 547504-001-00 AA AA AA AA AA AA AA AA AA AA AA AA AA AA A04NG10011600833 A04NG10011600833 A04NG10011600833 A04NG10011600833 A04NG10011600833 A04NG10011600834 A04NG10011600837 A05NG12011600839 A05NG12011600839 A05NG12011600839 A05NG12011600839 A04NG10011600833 A04NG10011600839 A04NG10011600840 BVL290KAZZ BVL290KAZZ BVL290KAZZ BVL290KAZZ BVL290KAZZ BVC1AAMCAA BVC1AAMCAA BVC1AAMCAA BVC1AAMCAA BVC1AAMCAA BVC1AAMCAA BVL290KAZZ BVL290KAZZ BVL290KAZZ -------good good empty empty good good removed good good good good good good good good good good good empty empty good good good 555082-001-00 AA 555082-001-00 AA 519863-003-00 01 01 SW Ver ---------- -----BVL3AA6GAA vx.y.z BVL3AA6GAA vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z vx.y.z A04NG10011600842 BVC1AA5CAA vx.y.z A04NG10011789982 BVC1AA5CAA vx.y.z A04NG10011600111 BVC1AARCAA z =============================================================================== Command completed successfully Error Codes Command failed Page 128 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment show eqpt-detail ({slot | fan}) Description The following information is shown: Slot: Displays the address of the OLT Slot or "fan" to indicate the fan tray. Card: Displays the name of the expected card for the slot or "-" if empty) Part Number: Displays the Motorola part number for the expected card. BOM Rev: Displays the hardware revision of the expected card (BOM rev). SW Ver: Displays the Software revision running (rX.X.X), or n/a if not applicable, or blank if the card is in operstate swtufail. Serial Number: Displays the Motorola serial number for the expected card. CLEI: Displays the Common Language Equipment Identification (CLEI) of the expected card. BootROM Ver: Displays the version of the Boot ROM, or "n/a" if no version is available to be reported (for example if the card is removed). CPLD Ver: Reports the CPLD firmware version (vN)for the expected card. (N is a hexidecimal number). If the Card status is "removed" or if the CPLD is not applicable, then n/a is shown. (Each card supports from 1 to 4 CPLDs - 3 readable max) Oper Status: Displays the current slot/card operating status. The states are: empty = No card type is associated with this slot init = Card is booting up and recovering configuration data good = Card is operating properly and available to carry service swtufail = Card is experiencing a software failure during turnup swfail = Card is experiencing a software failure during normal operation swmm = software mismatch or incompatibility with the version on the master system controller hwfail = Card has suffered a hardware failure comfail = Card is experiencing a communication failure removed = Card has physically been removed from the shelf shutdown = Card is shutting down Removable Optics: Indicates whether field installable/replaceable optics equipment is supported by the expected card. If no, the report is complete. If yes, the additional parameters for each port are reported in a table. If yes but a port's optics equipment is not equipped or has failed, then the values following that port number are "N/A". If yes but a port's optics equipment is not SFP (Small Form-factor Pluggable) optics that reports the required data (transceiver compliance code, link lengths, SFP vendor name, and user EEPROM, as specified in SFF Committee SFF-8472 "Diagnostic Monitoring Interface for Optical Xcvrs" Rev 9.5 June 1, 2004), then the value of each undetermined parameter is reported as "-". This field is not reported for the fan since it does not apply. Port: Displays the port index on the expected card. The following information is reported for optical ports on the expected card, if applicable. If there are no optical ports, then it is not reported. Rate&Reach: Displays the rate and reach of the SFP optics, based on the transceiver compliance code. For GigE ports the supported values are: 1000BASE-SX, 1000BASE-LX, 1000BASE-BX, Also reported for Motorola's SFP vendor (OCP) only, though Page 129 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment these terms are not IEEE and SFF standard, are: 1000BASE-EX (if 40 km) and 1000BASE-ZX (if 80 km, 1550 nm). For GPON ports, 2488GPON is supported (non standard) Max Link: Displays the maximum supported link length of the SFP optics, based on the longest of several link lengths supported on different types of fiber. For GigE ports the supported values include, for example: 550m, 5km, 10km, 40km, 80km. For GPON ports, the supported value includes 20 km, for example. SFP Vendor Name: Displays the name of the vendor supplying the SFP optics. (16 characters may be truncated to 15 characters to fit screen.) Part Number: Displays the Motorola part number (13 char.) if stored in user EEPROM of the SFP optics. Otherwise, the SFP vendor's part number may be displayed (16 char. would be truncated to 13). Serial Number: Displays the Motorola serial number (16 char.) if stored in user EEPROM of the SFP optics. Otherwise, the SFP vendor's serial number may be displayed. CLEI: Displays the Common Language Equipment Identification (CLEI) code (10 char.) if stored in user EEPROM of the SFP optics. The following information is reported for management ports on the System Controller cards only, and is not reported otherwise. Mgmt Port Oper Status: Reports the operating state (up, down, unknown) for both active and standby controllers. NOTE: If the installed card type is mismatched with the provisioned card type (swfailtu), the information reported is for the card provisioned for the slot. To determine the installed card type, consult the "show slot" report. NOTE: If communication to the card has failed and the card is still physically present in the chassis, then the expected card information is shown. NOTE: If there is no card inserted into the requested slot only the slot, card and operating status are reported; the remaining fields show "n/a". NOTE: For the fan tray, the Firmware Version is reported in the Software Version field, and the Status field reports one of the following: good, hwfail, or empty. NOTE: To view the equipment details for the ONT, use the CLI command "show ont eqpt". User Privilege Level: Operator Required Parameters: {slot | fan} Identifies the slot, or the fan unit. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: Page 130 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment AXS2200> show eqpt-detail au-3 =============================================================================== EQUIPMENT DETAIL REPORT DATE: 07/13/2005 TIME: 16:08:22 =============================================================================== Slot: au-3 Card: AGPONC Part Number: 532698-001-00 BOM Rev: AA SW Ver: vx.y.z Serial Number: A04NG10011600839 CLEI: BVL290KAAA BootROM Ver: 1 CPLD1 Ver: 1 CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: good Removable Optics: Yes Port ---1 2 3 4 Rate&Reach ----------2488GPON 2488GPON 2488GPON 2488GPON Max Link ---20km 20km 20km 20km SFP Vendor Name --------------Fiberxon Fiberxon Fiberxon Fiberxon Part Number ------------534129-002-00 534129-002-00 534129-002-00 534129-002-00 Serial Number ---------------1234567890123456 1234567890123456 1234567890123456 1234567890123456 CLEI ---------- =============================================================================== Command completed successfully Example 2: (card removed from slot) AXS2200> show eqpt-detail au-3 =============================================================================== EQUIPMENT DETAIL REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: au-3 Card: AGPONC Part Number: n/a BOM Rev: n/a SW Ver: n/a Serial Number: n/a CLEI: n/a BootROM Ver: n/a CPLD1 Ver: n/a CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: removed Removable Optics: No =============================================================================== Command completed successfully Example 3: (slot is empty) AXS2200> show eqpt-detail au-3 =============================================================================== EQUIPMENT DETAIL REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: au-3 Card: - Page 131 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment Part Number: n/a BOM Rev: n/a SW Ver: n/a Serial Number: n/a CLEI: n/a BootROM Ver: n/a CPLD1 Ver: n/a CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: empty Removable Optics: No =============================================================================== Command completed successfully Example 4: (variable speed fan) AXS2200> show eqpt-detail fan =============================================================================== EQUIPMENT DETAIL REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: fan Card: FANTRAY Part Number: 519863-003-00 BOM Rev: 01 SW Ver: 1 Serial Number: A04NG10011600111 CLEI: BVC1AARCAA BootROM Ver: n/a CPLD1 Ver: n/a CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: good =============================================================================== Command completed successfully Example 5: (ASW200D without XFP Optics plugged in) AXS2200> show eqpt-detail sw-a =============================================================================== EQUIPMENT DETAIL REPORT DATE: 08/25/2005 TIME: 16:08:22 =============================================================================== Slot: sw-a Card: ASW200D Part Number: 531454-001-00 BOM Rev: AA SW Ver: vx.y.z Serial Number: A05NG12011600839 CLEI: BVC1AAMCAA BootROM Ver: 1 CPLD1 Ver: 1 CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: good Removable Optics: Port ---1 2 Page Yes Max Rate&Reach Link SFP Vendor Name Part Number Serial Number CLEI ----------- ---- --------------- ------------- ---------------- ---------n/a 1000BASE-LX 40km SumitomoElectri 1234567890123456 - 132 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 3 4 5 6 7 Equipment 1000BASE-LX 1000BASE-LX 1000BASE-LX 1000BASE-LX 1000BASE-LX 40km 40km 40km 40km 40km SumitomoElectri SumitomoElectri SumitomoElectri SumitomoElectri SumitomoElectri - 1234567890123456 1234567890123456 1234567890123456 1234567890123456 1234567890123456 - =============================================================================== Command completed successfully Example 6: (active system controller ASYSC) AXS2200> show eqpt-detail sys-a =============================================================================== EQUIPMENT DETAIL REPORT DATE: 10/09/2007 TIME: 17:59:40 =============================================================================== Slot: sys-a Card: ASYSC Part Number: 542640-001-00 BOM Rev: 01 SW Ver: R6_1_0 Serial Number: D054900012600018 CLEI: BVC1AA5CAA BootRom Ver: v1_0 CPLD1 Ver: 7 CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: good Removable Optics: No Port: enet-mgt1 Mgmt Port Oper Status: up =============================================================================== Command completed successfully Example 7: (standby system controller ASYSC) AXS2200> show eqpt-detail sys-a =============================================================================== EQUIPMENT DETAIL REPORT DATE: 10/09/2007 TIME: 17:59:40 =============================================================================== Slot: sys-a Card: ASYSC Part Number: 542640-001-00 BOM Rev: 01 SW Ver: R6_1_0 Serial Number: D054900012600018 CLEI: BVC1AA5CAA BootRom Ver: v1_0 CPLD1 Ver: 7 CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: good Removable Optics: No Port: enet-mgt1 Mgmt Port Oper Status: unknown =============================================================================== Command completed successfully Example 8: Page 133 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment (standby system controller ASYSD) AXS2200> show eqpt-detail sys-a =============================================================================== EQUIPMENT DETAIL REPORT DATE: 10/09/2007 TIME: 17:59:40 =============================================================================== Slot: sys-a Card: ASYSD Part Number: 542640-001-00 BOM Rev: 01 SW Ver: R7_1_0 Serial Number: D054900012600018 CLEI: BVC1AA5CAA BootRom Ver: v1_0 CPLD1 Ver: 7 CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: good Removable Optics: No Port: enet-mgt1 Mgmt Port Oper Status: up =============================================================================== Command completed successfully Example 9 (AETHA) AXS2200> show eqpt-detail au-11 =============================================================================== EQUIPMENT DETAIL REPORT DATE: 08/25/2005 TIME: 16:08:22 =============================================================================== Slot: au-11 Card: AETHA Part Number: 531454-001-00 BOM Rev: AA SW Ver: vx.y.z Serial Number: A05NG12011600839 CLEI: BVC1AAMCAA BootROM Ver: 1 CPLD1 Ver: 1 CPLD2 Ver: n/a CPLD3 Ver: n/a Oper Status: good Removable Optics: Yes Max Port Rate&Reach Link SFP Vendor Name Part Number Serial Number CLEI ---- ----------- ---- --------------- ------------- ---------------- ---------1 n/a 2 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 3 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 4 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 5 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 6 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 7 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 8 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 9 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 10 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 11 1000BASE-LX 40km Motorola 525899-001-00 1234567890123456 =============================================================================== Command completed successfully Error Codes Invalid slot Page 134 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment show slot (slot) Description Displays all of the configuration parameters associated with the card in the specified slot. To view connections for the slot, use "show conn all slot <slot>". The report displays: Slot: AID of the board Slot Name: String describing the user specified name for the slot as equipment holder (this is independent of the user-specified name of a module (card) in this slot, which is set and shown separately) Expected Card Model: The expected card model or none Installed Card Model: The actual card model installed in the slot, or none Card Name: User-specified card (module) name. (empty after executing clear slot) Admin Equipment Protection Mode (Eqpt Mode): np, p (& the protected slot AID) If protected equipment mode, will show working/protected Slot Service State: Displays the current slot/card operating status. The states are: empty = No card type is associated with this slot init = Card is booting up and recovering configuration data good = Card is operating properly and available to carry service swtufail = Card is experiencing a software failure during turnup swfail = Card is experiencing a software failure during normal operation swmm = software mismatch or incompatibility with the version on the master system controller hwfail = Card has suffered a hardware failure comfail = Card is experiencing a communication failure removed = Card has physically been removed from the shelf shutdown = Card is shutting down For switch cards, there are additional parameters that are reported: Switch Fabric operating state: active, standby Chassis Timing distribution operating state: active, standby Interfaces operating states by port: For GigE and GPON interfaces: unprot (unprotected), disabled To view ONTs that are associated with any particular PON, refer to "show pon". The command is not valid for system controller slots. User Privilege Level: Operator Required Parameters: slot Specifies the desired slot of the chassis. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: Page 135 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment (ASW200D, equipment protection enabled, card in this slot is active, no port protection switching) AXS2200> show slot sw-a =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: sw-a Slot Name: Switchcard_7786 Expected Card Model: ASW200D Installed Card Model: ASW200D Card Name: Boston_200_554-7 Admin Eqpt Mode: protected (sw-b) - Working slot Slot Service State: good Switch Fabric operating state: active Chassis Timing distribution operating state: active Interfaces operating states: Port State -------------1 disabled 2 unprot 3 unprot 4 unprot 5 unprot 6 unprot 7 unprot =============================================================================== Command completed successfully Example 2: (ASW200D, equipment protection enabled, card in this slot is standby, no ports active) AXS2200> show slot sw-a =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: sw-a Slot Name: Expected Card Model: ASW200D Installed Card Model: ASW200D Card Name: Admin Eqpt Mode: protected (sw-b) - Working slot Slot Service State: good Switch Fabric operating state: standby Chassis Timing distribution operating state: standby Interfaces operating states: Port State -------------1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled =============================================================================== Command completed successfully Example 3: (Voice Gateway card report in AU-1 (1+1)) Page 136 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment AXS2200> show slot au-1 =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: au-1 Slot Name: myVoice_Gateway_443 Expected Card Model: AVGC Installed Card Model: AVGC Card Name: AVGC_Boston_7763 Admin Eqpt Mode: protected (au-2) - Working slot Slot Service State: good =============================================================================== Command completed successfully Example 4: (report for an empty slot) AXS2200> show slot au-3 =============================================================================== SLOT REPORT DATE: 07/17/2041 TIME: 16:08:22 =============================================================================== Slot: au-3 Slot Name: Verizon_VGW_slot_7765-3 Expected Card Model: none Installed Card Model: none Card Name: Admin Eqpt Mode: n/a Slot Service State: empty =============================================================================== Command completed successfully Example 5: (4-port PON card report) AXS2200> show slot au-9 =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: au-9 Slot Name: Expected Card Model: AGPONC Installed Card Model: AGPONC Card Name: Admin Eqpt Mode: n/a Slot Service State: good Interfaces operating states: Port State -------------1 unprot 2 unprot 3 unprot 4 disabled =============================================================================== Command completed successfully Example 6: (Mismatched card report) Page 137 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment AXS2200> show slot au-3 =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: au-3 Slot Name: VG_gtty Expected Card Model: AVGC Installed Card Model: AGPONC Card Name: Besoch Admin Eqpt Mode: n/a Slot Service State: swtufail =============================================================================== Command completed successfully Example 7: (ASW200D) AXS2200> show slot sw-a =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: sw-a Slot Name: mySwitchcard_887 Expected Card Model: ASW200D Installed Card Model: ASW200D Card Name: Admin Eqpt Mode: protected (sw-b) - Working slot Slot Service State: good Switch Fabric operating state: active Chassis Timing distribution operating state: active Interfaces operating states: Port State -------------1 disabled 2 unprot 3 unprot 4 disabled 5 unprot 6 unprot 7 unprot =============================================================================== Command completed successfully Example 8: (ASW200D with switch card standby and active GigE links) AXS2200> show slot sw-a =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: sw-a Slot Name: switch_vvbgt Expected Card Model: ASW200D Installed Card Model: ASW200D Card Name: switch_vvbgt_9987 Admin Eqpt Mode: protected (sw-b) - Working slot Slot Service State: good Switch Fabric operating state: standby Page 138 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment Chassis Timing distribution operating state: standby Interfaces operating states: Port State -------------1 disabled 2 unprot 3 unprot 4 disabled 5 unprot 6 unprot 7 unprot =============================================================================== Command completed successfully Example 9: (AGPONC) AXS2200> show slot au-9 =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: au-9 Slot Name: Expected Card Model: AGPONC Installed Card Model: AGPONC Card Name: Admin Eqpt Mode: n/a Slot Service State: good Interfaces operating states: Port State -------------1 unprot 2 unprot 3 unprot 4 disabled =============================================================================== Command completed successfully Example 10: (AETHA) AXS2200> show slot au-11 =============================================================================== SLOT REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Slot: au-11 Slot Name: Linecard_6675_FTC Expected Card Model: AETHA Installed Card Model: AETHA Card Name: GigELine_NH Admin Eqpt Mode: n/a Slot Service State: good Gigabit Ethernet Port Mode: 1GigE Interfaces operating states: Port State -------------1 disabled 2 unprot 3 unprot 4 disabled 5 unprot 6 unprot Page 139 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Equipment 7 8 9 10 11 unprot unprot unprot unprot unprot =============================================================================== Command completed successfully Error Codes Invalid slot Page 140 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 141 Equipment AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM Ethernet Link Layer OAM set loopback port gige (slot-port) type (fe) Description Sets up a service affecting loopback on the far end of the GigE/ 10GigE WAN interface. This command is used to request a service affecting loopback at the far end of the link using OAM PDUs. Use the far end loopback in preparation for the test gige-loopback operation. Confirmation of far end loopback being set up properly is communicated via event messages, which are sent to the EMS and are logged in the condition log. The port must have an operating state of up to process the loopback request, and Ethernet OAM must be configured. User Privilege Level: Superuser Required Parameters: type fe Indicates the far end (fe). gige slot-port Identifies the GigE port. Default Values none Confirmation Message This will affect services on the link. Do you want to continue? y| n >y Command completed successfully Example(s) Example 1 AXS2200> set loopback port gige sw-a-2 type fe This will affect services on the link. Do you want to continue? y| n >y Command completed successfully Example 2 AXS2200> set loopback port gige au-11-2 type fe This will affect services on the link. Do you want to continue? y| n >y Command completed successfully Page 142 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM Error Codes Port operating state is down GigE Port(s) does not have Ethernet OAM enabled Invalid port Ethernet OAM Mode must be active to initiate far end loopbacks Ethernet OAM link is down Ethernet OAM far end peer rejects request Loopback in effect Page 143 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM set port gige-oam (slot-port) mode ({active | passive}) Description Sets the IEEE 802.3ah Ethernet OAM mode to active or passive for the link. Active mode supports the ability to initiate the OAM link discovery, and request far end loopbacks. The Ethernet OAM state must be disabled in order to change the mode. User Privilege Level: Superuser Required Parameters: mode {active | passive} Indicates whether the mode is to be set to active or passive. gige-oam slot-port Indicates the Gigabit/ 10 Gigabit Ethernet port. Default Values Default mode = passive Confirmation Message Command completed successfully Example(s) Example 1: (individual port) AXS2200> set port gige-oam sw-a-2 mode active Command completed successfully Example 2: (Ethernet link on line card) AXS2200> set port gige-oam au-11-1 mode active Command completed successfully Error Codes Invalid port Far End Loopback must first be cleared GigE port OAM state must be disabled Page 144 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM set port gige-oam (slot-port) state ({enable | disable}) Description Allows the user to enable IEEE 802.3ah Link Layer OAM on the Gigabit Ethernet WAN port. There must be no loopback configured in order to set the state to disabled. User Privilege Level: Superuser Required Parameters: gige-oam slot-port Indicates the Gigabit/ 10 Gigabit Ethernet port. state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). Default Values State = disable Confirmation Message Command completed successfully Example(s) Example 1: (individual port) AXS2200> set port gige-oam sw-a-2 state enable Command completed successfully Example 2: AXS2200> set port gige-oam au-11-1 state enable Command completed successfully Error Codes Invalid port Loopback in effect TCA must be disabled first Invalid ONT equipment state for request Page 145 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM set port gige-oam (slot-port) tca-type (oamtcatype) window (efwindow) threshold (efthreshold) Description Configures the IEEE 802.3ah Link Layer Ethernet OAM TCA settings. These settings are used to communicate events over the OAM link to the far end peer, in addition to notification to the EMS. One type of TCA is supported: - ef: Errored Frame TCA The window and the threshold are configurable. Default values will be used for the attributes if they are not provided in the command. The TCA type must first be set to disabled before the window and/or threshold can be modified. User Privilege Level: Superuser Required Parameters: gige-oam slot-port Indicates the Gigabit/ 10 Gigabit Ethernet port. tca-type oamtcatype Indicates the OAM TCA type. The only supported value is: ef (errored frames). Optional Parameters: window efwindow Indicates the number of seconds for the Errored Frames TCA window. Valid values are {1-60} in 1 second intervals. threshold efthreshold Configurable threshold against which measured errored frames counters are compared in order to determine if a TCA should be triggered. Valid values are from {1-65535}. Default Values ef: default window is 1.0 seconds, default threshold is 1 Confirmation Message Command completed successfully Example(s) Example 1: (individual port) AXS2200> set port gige-oam sw-a-2 tca-type ef window 60 threshold 10 Command completed successfully Example 2: (individual port) AXS2200> set port gige-oam au-11-2 tca-type ef window 60 threshold 10 Page 146 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM Command completed successfully Error Codes Invalid port Invalid window Invalid threshold TCA must be disabled first Page 147 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM set port gige-oam (slot-port) tca-type (oamtcatype) state ({enable | disable}) Description Sets the administrative state for the supported Ethernet Link Layer OAM EF TCA on the GigE port. User Privilege Level: Superuser Required Parameters: gige-oam slot-port Indicates the Gigabit/ 10 Gigabit Ethernet port. {enable | disable} state Sets the state to enable (AdminState up) or disable (AdminState down). tca-type oamtcatype Indicates the OAM TCA type. The only supported value is: ef (errored frames). Default Values iniitial state is disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set port gige-oam sw-a-1 tca-type ef state enable Command completed successfully Example 2: AXS2200> set port gige-oam au-11-1 tca-type ef state enable Command completed successfully Error Codes GigE Port(s) does not have Ethernet OAM enabled Invalid port Page 148 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM show port gige-oam (slot) Description Displays the IEEE 802.3ah Ethernet OAM link layer settings. Displayed information includes: OAM Admin State: enable, disable Mode: active, passive EF TCA State: enable, disable EF Window: The window for the Errored Frame TCA (in secomds) EF Th: The threshold for the Errored Frame TCA Note: For ports that do not have Ethernet OAM enabled, a dash is shown for each setting. User Privilege Level: Operator Required Parameters: gige-oam slot Indicates the slot. slot: sw-{a,b}, au-x Example: sw-a, au-11 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show port gige-oam sw-a =============================================================================== GigE Ethernet OAM Report DATE: 06/01/2007 TIME: 20:15:40 =============================================================================== Port ------sw-a-1 sw-a-2 sw-a-3 sw-a-4 sw-a-5 sw-a-6 sw-a-7 OAM Admin ------disable enable enable enable disable enable enable Mode ------passive active active passive passive passive EF TCA State ------enable enable enable enable enable enable EF Window (sec) -----1 1 1 1 1 1 EF Th -----1 1 1 1 1 1 =============================================================================== Command completed successfully Error Codes Invalid slot Page 149 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM show testresult gige-loopback (slot-port) Description Displays the last test result for the Gige loopback test on the port. The following information is shown: AID: The port address under test Timestamp: Date and time stamp for when the test was last executed. Test pattern: Number of packets: The number of packets specified by the user for the test Size of packets (octets): The packet size specified by the user {64, 1500 octets} Statistics for the duration of the test: Tx Octets Tx Packets Rx Octets Rx Packets Rx Packets Discarded Rx Bit Errors Rx Errors Rx FCS Errors RX internal MAC Errors User Privilege Level: Operator Required Parameters: gige-loopback slot-port Indicates the GigE/ 10GigE port Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (all good) AXS2200> show testresult gige-loopback sw-a-2 =============================================================================== GIGE LOOPBACK TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== AID: sw-a-2 Timestamp: 5/19/07 12:02:00 Test Pattern: Number of packets: 100 Size of Packets (octets): 1500 Test Statistics: Tx Octets: 123 Tx Packets: 123 Page 150 Rx Rx Rx Rx Octets: 123 Packets: 123 Bit Errors: 0 Errors: 0 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM Rx FCS Errors: 0 Rx Internal MAC Errors: 0 =============================================================================== Command completed successfully Example 2: (no prior test results available) AXS2200> show testresult gige-loopback sw-a-2 Test results are not available Example 3: (test currently in progress) AXS2200> show testresult gige-loopback sw-a-2 Test is already in progress Example 4: (test currently in progress) AXS2200> show testresult gige-loopback au-11-2 Test is already in progress Error Codes Test is already in progress Test results are not available Page 151 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM test gige-loopback (slot-port) numpackets (value) sizepackets (size) Description Tests the GigE/10GigE WAN interface while a far end loopback is in effect. The GigE/10GigE port interface will inject a pseudorandom test pattern in the transmit direction for the number of packets and using the size of packets indicated in the command. If the number of packets and/or the size of the packets is not specified, the default settings will be used. When the test completes or times out, an event message is sent to the EMS and CLI users to inform them that the test completed. More detailed results are stored to a file that may be retreived using the command "show test results gige-loopback". The port under test must also be currently confirmed to be in a far end loopback before the test can be performed. The physical port must be set to admin state enable, and have a good operating state in order to perform this test. User Privilege Level: Superuser Required Parameters: slot-port Selects the desired port. Optional Parameters: numpackets value Indicates the number of packets to be sent in the test. Valid values are from 1-100. sizepackets size Indicates the size of the packets to use for the test. Valid values are provided in octets: {64, 1500}. Default Values numpackets=100 sizepackets=1500 Confirmation Message Test initiated Example(s) Example 1: (default values used) AXS2200> test gige-loopback sw-a-2 Test initiated. Example 2: (port is not confirmed to be in far end loopback) AXS2200> test gige-loopback sw-a-2 Far end loopback not established Example 3: Page 152 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Link Layer OAM (all values specified) AXS2200> test gige-loopback sw-a-2 numpackets 100 sizepackets 64 Test initiated. Example 4: (all values specified, loopback on line card) AXS2200> test gige-loopback au-11-2 numpackets 100 sizepackets 64 Test initiated. Error Codes Invalid port state GigE Port(s) does not have Ethernet OAM enabled Far end loopback not established Invalid port Page 153 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 154 Ethernet Link Layer OAM AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Ethernet Service Layer CFM del eth-cfm mep olt (cfmport) svid (svlanid) Description Deletes a MEP on an OLT WAN interface for the specified S-VLAN ID and for the IntraCarrier MD Level. User Privilege Level: Superuser Required Parameters: svid svlanid Identifies the S-VLAN mep olt cfmport Indicates the interface address on the OLT system that can be configured for CFM. - lag-{1-128} - sw-{a,b}-{1-7} - au-x-{1-11} Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (GigE port) AXS2200> del eth-cfm mep olt sw-a-1 svid 200 Command completed successfully Example 2: (Link Aggregation Group) AXS2200> del eth-cfm mep olt lag-1 svid 200 Command completed successfully Example 3: (GigE port) AXS2200> del eth-cfm mep olt au-11-1 svid 200 Command completed successfully Error Codes MEP/MIP not found VLAN - Must be in double-tagged Chassis mode Page 155 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM insert cfm loopback olt (cfmport) svid (svlanid) dest-mac (macaddress) Description Inserts an Ethernet CFM loopback request from an OLT WAN port and S-VLAN ID to a remote MP. One LBM is sent by default. In the case of N:1 VLANs, it is theorietically possible that more than one response may be received if the default MAC address is used. In that case, only the first loopback response is presented. All subsequent LBRs are discarded. The command will time out in 5 seconds. User Privilege Level: Operator Required Parameters: olt cfmport Indicates the interface address on the OLT system that can be configured for CFM. - lag-{1-128} - sw-{a,b}-{1-7} - au-x-{1-11} svid svlanid Identifies the S-VLAN Optional Parameters: dest-mac macaddress The destination MAC address represented by 6 hexidecimal octets separated by dashes. For example: 1F-A3-55-EF-08-1A Default Values If not provided, the CCM group MAC address is used, which will result in all remote MEPs responding with LBR. Confirmation Message Command completed successfully Example(s) Example 1: (success, default MAC address used for double-tagged VLAN end to end loopback) AXS2200> insert cfm loopback olt lag-1 svid 200 Command initiated... Test Result: success Test Duration (sec): 0.000123 LBR TransactionID: 1 Responding MEP MAC address: 00-00-11-22-33-44 Command completed successfully Example 2: (request times out, for a double-tagged VLAN, all defaults used) AXS2200> insert cfm loopback olt sw-a-1 svid 16 Page 156 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Command initiated... Test Result: failure Test Duration (sec): 5.000000 LBR TransactionID: 1 Responding MEP MAC address: none Command completed successfully Example 3: (success, individual MAC address provided) AXS2200> insert cfm loopback olt lag-1 svid 200 dest-mac 11-11-11-11-11-11 Command initiated... Test Result: success Test Duration (sec): 0.000123 LBR TransactionID: 24 Responding MEP MAC address: 11-11-11-11-11-11-11 Command completed successfully Example 4: (success, default MAC address and count used for single-tagged VLAN end to end loopback. Note that only the first LBR is recorded.) AXS2200> insert cfm loopback olt lag-1 svid 400 Command initiated... Test Result: success Test Duration (sec): 0.000123 LBR TransactionID: 1 Responding MEP MAC address: 00-00-11-22-33-44 Command completed successfully Error Codes VLAN member not found VLAN not found Invalid MAC address MEP/MIP not found Connection does not exist Invalid - connection is inactive Page 157 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM insert cfm loopback ont (ontportaddr) dest-mac (macaddress) Description Inserts an Ethernet CFM loopback request from an ONT connection endpoint toward the far end. One LBM is sent by default. In the case of single-tagged VLANs, it is theoretically possible that more than one response may be received if the default MAC address is used. In that case, only the first loopback response is presented. All subsequent LBRs are discarded. The command will time out in 5 seconds. User Privilege Level: Operator Required Parameters: ont ontportaddr Indicates the ONT port address. Valid values are: - slot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (pots, enet, moca, voip, vdsl2) - index (1-n) Optional Parameters: dest-mac macaddress The destination MAC address represented by 6 hexidecimal octets separated by dashes. For example: 1F-A3-55-EF-08-1A Default Values If not provided, the CCM group MAC address is used, which will result in all remote MEPs responding with LBR. Confirmation Message Example(s) Example 1: (success, defaults used for double-tagged VLAN end-to-end loopback) AXS2200> insert cfm loopback ont au-5-1-1-enet-1 Command initiated... Test Result: success Test Duration (sec): 0.000123 LBR TransactionID: 1 Responding MEP MAC address: 00-00-11-22-33-44 Command completed successfully Page 158 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Example 2: (failure -- i.e. request times out, double-tagged VLAN, all defaults used) AXS2200> insert cfm loopback ont au-5-1-1-enet-1 Command initiated... Test Result: failure Test Duration (sec): 5.000000 LBR TransactionID: 1 Responding MEP MAC address: none Example 3: (success, individual MAC address provided) AXS2200> insert cfm loopback ont au-5-1-1-enet-1 dest-mac 11-11-11-11-11-11 Command initiated... Test Result: success Test Duration (sec): 0.000123 LBR TransactionID: 1 Responding MEP MAC address: 11-11-11-11-11-11 Command completed successfully Example 4: (success, default MAC address used for single-tagged VLAN end to end loopback. Note only the first LBR will be presented) AXS2200> insert cfm loopback ont au-5-1-1-enet-2 Command initiated... Test Result: success Test Duration (sec): 0.000123 LBR TransactionID: 1 Responding MEP MAC address: 00-00-11-22-33-44 Command completed successfully Error Codes Invalid interface Connection does not exist Ethernet CFM is not enabled Invalid MAC address Invalid- connection is inactive Page 159 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM set eth-cfm config default-eth-cfm ({enable | disable}) intracarrier-mdlevel (mdlevel) default-intracarrier-mepid ({1-8191}) carrier-mdlevel (level) default-carrier-mepid ({1-8191}) priority ({0-7}) Description Specifies the system defaults for Ethernet CFM. The values for default-eth-cfm, default-intracarrier-mepid, and default-carrier-mepid set the defaults for all future set connection operations. These attributes may be changed while there are MEPS configured in the system. Priority may also be changed while there are MEPS configured in the system. The Intra-Carrier and Carrier MD Levels can only be changed when there are no MEPs configured in the system. The Carrier MD level must be set to a value higher than the Intra-Carrier MD Level. Per IEEE 802.1ag, usually the levels are allocated in this manner: - levels 7, 6, 5 for customer domain - levels 4, 3 for service provider domain - levels 2, 1, 0 for operator domain User Privilege Level: Superuser Required Parameters: config Optional Parameters: default-eth-cfm {enable | disable} Sets the value to use as a default for Ethernet CFM on all new connections that are configured. priority {0-7} Sets the priority for CFM frames (0 is the lowest and 7 is the highest value). {1- default-intracarrier-mepid 8191} Assigns the default value to use for the MEP ID for a new MEP (i.e. MA) in the Intracarrier MD. {1-8191} default-carrier-mepid Assigns the default value for the MEP ID to use for the first connection (i.e. MA) in the carrier MD. Any additional MEP IDs that need to be assigned will be in sequential order (for example, N:1 connections) intracarrier-mdlevel mdlevel Specifies the MD level for the intra-carrier domain. It covers the maintenance domain from the Gateway router to the OLT. Itakes a value from {0-7}. carrier-mdlevel Page 160 level AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Specifies the MD level for the carrier domain. It covers the maintenance domain from the Gateway router to the ONT. Itakes a value from {0-7}. Default Values default-eth-cfm is disable intracarrier-mdlevel is 2 default-intracarrier-mepid is 2 carrier-mdlevel is 3 default-carrier-mepid is 2 priority is 3 Confirmation Message Command completed successfully Example(s) Example 1: (all attributes changed) AXS2200> set eth-cfm config default-eth-cfm enable intracarrier-mdlevel 3 default-intracarrier-mepid 300 carrier-mdlevel 4 default-carrier-mepid 400 priority 2 Command completed successfully Example 2: (only MD levels configured) AXS2200> set eth-cfm config intracarrier-mdlevel 2 carrier-mdlevel 3 Command completed successfully Example 3: (only the chassis default-eth-cfm setting configured) AXS2200> set eth-cfm config default-eth-cfm enable Command completed successfully Error Codes Intra-Carrier MD Level must be lower than the carrier MD Level MEPs must first be deleted Carrier MD Level must be higher than the Intra-Carrier MD Level At least one attribute is required to be set Page 161 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM set eth-cfm mep olt (cfmport) intracarrier svid (svlanid) mepid (value) Description Defines a down MEP (Maintenence Endpoint) at the Intra-Carrier MD Level for the MAID / S-VLAN ID on the OLT WAN port. The creation of a MEP allows the user to initiate non-service affecting CFM loopbacks at the Intra-Carrier MD Level for the OLT WAN port and S-VLAN ID. MEPs can be only be created on GigE / 10GigE ports that are not members of link aggregation groups. If a port is a member of a link aggregation group, the MEP is only able to be created on the LAG. User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. mep intracarrier Indicates the IntraCarrier Maintenance Domain. olt cfmport Indicates the interface address on the OLT system that can be configured for CFM. - lag-{1-128} - sw-{a,b}-{1-7} - au-x-{1-11} Optional Parameters: mepid value Sets the MEP ID used for Ethernet CFM. Valid values are: {1-8191}. Default Values mepid = default intracarrier-mepid Confirmation Message Command completed successfully Example(s) Example 1: (GigE Port that is not used in a LAG, default MEPID) AXS2200> set eth-cfm mep olt sw-a-1 intracarrier svid 200 Command completed successfully Page 162 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Example 2: (LAG, MEPID specified) AXS2200> set eth-cfm mep olt lag-1 intracarrier svid 201 mepid 800 Command completed successfully Error Codes GigE port is a member of a link aggregation group Link Aggregation Group has no GigE ports assigned as members MEP already exists Ethernet CFM is not supported on Ethernet Line Card Page 163 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM show eth-cfm config Description Displays the system settings for Ethernet CFM. Default Ethernet CFM state: {enable, disable} - used as the default for new connections Intra-Carrier MD Level: {0-7} Default Intra-Carrier MEP ID: {1-8191} - used as the default for new OLT MEPs Carrier MD Level: {0-7} Default Carrier MEP ID: {1-8191} - used as the default for the first ONT MEP for a connection Priority: {0-7} - Frame priority for CFM messages User Privilege Level: Operator Required Parameters: config Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show eth-cfm config =============================================================================== Ethernet CFM Configuration Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== Default Ethernet CFM state: disable Intra-Carrier MD Level: 2 Default Intra-Carrier MEP ID: 2 Carrier MD Level: 3 Default Carrier MEP ID: 2 Priority: 3 =============================================================================== Command completed successfully Error Codes Page 164 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM show eth-cfm mep olt (cfmport) svid (svlanid) Description Displays all Ethernet CFM MEPs configured on the OLT port. Reports the AID of the OLT port or Link Aggregation Group and its MAC address. Reports for each MEP: - MEP ID - MD Level - S-VID - MEP Direction: {up, down} User Privilege Level: Operator Required Parameters: olt cfmport Indicates the interface address on the OLT system that can be configured for CFM. - lag-{1-128} - sw-{a,b}-{1-7} - au-x-{1-11} mep Optional Parameters: svid svlanid Identifies the S-VLAN Default Values If s-vid is not provided, all MEPs for all S-VIDs on the OLT port are shown. Confirmation Message Command completed successfully Example(s) Example 1: (no svid provided) AXS2200> show eth-cfm mep olt lag-1 =============================================================================== Ethernet CFM OLT Port MEPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== AID: lag-1 MAC Address: MEPID ----2 2 2 Page 165 00-00-00-FF-FF-FF MD Level -------2 2 2 S-VID ------100 101 102 Direction --------down down down AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 2 2 2 2 2 2 2 2 Ethernet Service Layer CFM 2 2 2 2 2 2 2 2 103 104 105 106 107 108 109 110 down down down down down down down down =============================================================================== Command completed successfully Example 2: (S-VID provided) AXS2200> show eth-cfm mep olt lag-1 svid 100 =============================================================================== Ethernet CFM OLT Port MEPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== AID: lag-1 MAC Address: MEPID ----2 00-00-00-FF-FF-FF MD Level -------2 S-VID ------100 Direction --------down =============================================================================== Command completed successfully Example 3: (No MEPS found that meet the search criteria) AXS2200> show eth-cfm mep olt lag-1 vlan-id 132 No MEP is configured Command completed successfully Error Codes No MEP is configured Invalid svid Page 166 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM show eth-cfm mep ont (ontaddress) Description Displays all Ethernet CFM MEPs configured on the ONT. Reports the ONT AID, and MAC address. Reports for each MEP: - MEP ID - MD Level - S-VID: Reports the SVLAN ID - C-VID: For double tagged VLANS only, otherwise "-" is shown - MEP Direction: {up, down} This command does not apply to preprovisioned ONTs, since MEPs are created only on ranged ONTs. Additionally, MEPs cannot be reported for ONTs that are failing to communicate to the OLT. User Privilege Level: Operator Required Parameters: ont ontaddress Specifies the address of the ONT in the format: - oltslot-port-channel (e.g. au-5-1-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) mep Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (SFU ONT double-tagged VLANs) AXS2200> show eth-cfm mep ont au-5-1-1 =============================================================================== Ethernet CFM ONT Port MEPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== AID: au-5-1-1 ONT MAC Address: Port AID -------enet-1 voip MEPID ----2 2 00-00-00-FF-FF-FF MD Level -------3 3 S-VID ------20 20 C-VID ------16 2012 Direction --------up up =============================================================================== Page 167 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Command completed successfully Example 2: (ONT6000GET MDU ONT double-tagged VLANs) AXS2200> show eth-cfm mep ont au-5-1-1 =============================================================================== Ethernet CFM ONT Port MEPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== AID: au-5-1-1 ONT MAC Address: Port AID -------enet-1 enet-2 enet-3 enet-4 enet-5 enet-6 enet-7 enet-8 enet-9 enet-10 enet-11 enet-12 voip MEPID ----2 2 2 2 2 2 2 2 2 2 2 2 2 00-00-00-FF-FF-FF MD Level -------3 3 3 3 3 3 3 3 3 3 3 3 3 S-VID ------20 20 20 20 20 20 20 20 20 20 20 20 20 C-VID ------20 21 22 23 24 25 26 27 28 29 38 42 2013 Direction --------up up up up up up up up up up up up up =============================================================================== Command completed successfully Example 3: (ONT6000GVT MDU ONT- single-tagged data VLANsONT ports that are not configured with connections are not listed) AXS2200> show eth-cfm mep ont au-5-1-1 =============================================================================== Ethernet CFM ONT Port MEPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== AID: au-5-1-1 ONT MAC Address: Port AID -------vdsl2-1 vdsl2-2 vdsl2-3 vdsl2-4 vdsl2-5 vdsl2-6 vdsl2-10 vdsl2-11 vdsl2-12 voip MEPID ----2 3 4 5 6 7 2 3 4 2 00-00-00-FF-FF-FF MD Level -------3 3 3 3 3 3 3 3 3 3 S-VID ------400 400 400 400 400 400 500 500 500 3000 C-VID ------- Direction --------up up up up up up up up up up =============================================================================== Command completed successfully Example 4: (ONT1500GT MDU ONT- single-tagged VLANs) AXS2200> show eth-cfm mep ont au-5-1-1 =============================================================================== Ethernet CFM ONT Port MEPs Report Page 168 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== AID: au-5-1-1 ONT MAC Address: Port AID -------enet-1 enet-2 moca-1 voip MEPID ----2 20 32 2 00-00-00-FF-FF-FF MD Level -------3 3 3 3 S-VID ------400 400 400 500 C-VID ------- Direction --------up up up up =============================================================================== Command completed successfully Error Codes No MEP is configured Invalid for pre-provisioned ONTs without serial numbers Invalid ONT equipment state for request Page 169 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM show eth-cfm mip olt svid (svlanid) cvid (cvlanid) Description Displays the configured MIPs for the OLT. Reports the MAC address for Ethernet CFM MIPs on the OLT. Reports for each MIP: - MD Level - SVID - CVID (only applies to double-tagged connections) User Privilege Level: Operator Required Parameters: olt mip Optional Parameters: svid svlanid Identifies the S-VLAN cvid cvlanid Indicates the C-VLAN ID. Default Values If svid is not provided, all svlan-ids are shown (single-tagged VLANs only). If cvid is not provided for double tagged VLANs, than all MIPS for the SVLAN-ID are shown. Confirmation Message Command completed successfully Example(s) Example 1: (no optional parameters provided, double-tagged VLANs) AXS2200> show eth-cfm mip olt =============================================================================== Ethernet CFM OLT MIPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== MAC Address: MD Level -------3 3 3 3 Page 170 00-00-00-FF-FF-FF SVID ------100 100 100 100 CVID -------12 13 14 2012 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 3 3 3 3 3 3 3 3 3 3 3 Ethernet Service Layer CFM 100 101 101 101 101 101 123 123 123 123 123 2013 12 13 14 2012 2013 12 13 14 2012 2013 =============================================================================== Command completed successfully Example 2: (only SVLAN provided, double-tagged VLANs) AXS2200> show eth-cfm mip olt svid 100 =============================================================================== Ethernet CFM OLT MIPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== MAC Address: MD Level -------3 3 3 3 3 00-00-00-FF-FF-FF SVID ------100 100 100 100 100 CVID -------12 13 14 2012 2013 =============================================================================== Command completed successfully Example 3: (SVLAN and CVLAN provided, double-tagged VLANs) AXS2200> show eth-cfm mip olt svid 100 cvid 2012 =============================================================================== Ethernet CFM OLT MIPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== MAC Address: MD Level -------3 00-00-00-FF-FF-FF SVID ------100 CVID -------2012 =============================================================================== Command completed successfully Example 4: (no optional parameters provided, single-tagged VLANs) AXS2200> show eth-cfm mip olt =============================================================================== Ethernet CFM OLT MIPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== MAC Address: MD Level -------- Page 171 00-00-00-FF-FF-FF SVID ------- CVID -------- AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 3 3 3 3 3 3 3 3 3 Ethernet Service Layer CFM 400 401 402 403 500 555 556 557 560 - =============================================================================== Command completed successfully Example 5: (only SVLAN provided, single-tagged VLANs) AXS2200> show eth-cfm mip olt svid 400 =============================================================================== Ethernet CFM OLT MIPs Report DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== MAC Address: MD Level -------3 00-00-00-FF-FF-FF SVID ------400 CVID -------- =============================================================================== Command completed successfully Example 6: (SVLAN and CVLAN provided, single-tagged VLANs) AXS2200> show eth-cfm mip olt svid 400 cvid 100 CVLAN ID invalid for single tagged VLANs Error Codes CVLAN ID invalid for single tagged VLANs MIP not found CVLAN ID not valid without SVLAN ID Ethernet CFM is not enabled Invalid cvid Invalid svid Page 172 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM show stats mep olt (cfmport) svid (svlanid) Description Displays the OLT MEP stats. - Port ID: the port where the MEP resides (e.g. a GigE/10 GigE port or a LAG) - S-VID: The S-VLAN ID/MA ID for the MEP - MD Level: The MD Level for the MEP - MEP ID: value of the CFM MEP ID - MEP Direction: up, down - Next LBM Trans ID: Next LBM transaction ID - RX CFM LBM Packets: Number of received LBM Packets - RX CFM LBR In-Order Packets: Number of received LBRs that were received in order - RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order - RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) - RX CFM LTM Packets: Number of received LTM packets - RX CFM LTR Unexpected Packets: Number of unexpected LTR packets - TX CFM LBM Packets: Number of transmitted LBM packets - TX CFM LBR Packets: Number of transmitted LBR packets - TX CFM LTR Packets: Number of transmitted LTR packets User Privilege Level: Operator Required Parameters: mep svid svlanid Identifies the S-VLAN olt cfmport Indicates the interface address on the OLT system that can be configured for CFM. - lag-{1-128} - sw-{a,b}-{1-7} - au-x-{1-11} Default Values MD Level = Intracarrier MD level Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats mep olt lag-1 svid 100 =============================================================================== OLT MEP Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Page 173 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Port: lag-1 S-VID: 100 MD Level: 2 MEP ID: 2 MEP Direction: down Next LBM Transaction ID: 10 Rx LBM Packets: 5 Rx LBR In-Order Packets: 4 Rx LBR Out-of-Order Packets: 0 Rx LBR Bad MSDU Packets: 0 Rx LTM Packets: 4 Rx LTR Unexpected Packets: 0 Tx LBM Packets: 4 Tx LBR Packets: 5 Tx LTR Packets: 4 =============================================================================== Command completed successfully Error Codes Invalid port MEP/MIP not found Page 174 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM show stats mep ontport (ontdataaddress) Description Displays the stats for the MEP on the ONT CPE port. - Port ID: The port where the MEP resides - S-VID: The SVLAN-ID/MA ID for the MEP - C-VID: The CVLAN-ID/MA ID for the MEP. If the port is part of a single tagged VLAN, then a dash is shown "-" - MD Level: The MD Level for the MEP - MEP ID: value of the CFM MEP ID - MEP Direction: The direction of the MEP {up, down} - Next LBM Trans ID: Next LBM transaction ID - RX CFM LBM Packets: Number of received LBM Packets - RX CFM LBR In-Order Packets: Number of received LBRs that were received in order - RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order - RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) - RX CFM LTM Packets: Number of received LTM packets - RX CFM LTR Unexpected Packets: Number of unexpected LTR packets - TX CFM LBM Packets: Number of transmitted LBM packets - TX CFM LBR Packets: Number of transmitted LBR packets - TX CFM LTR Packets: Number of transmitted LTR packets User Privilege Level: Operator Required Parameters: mep ontport ontdataaddress Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (enet, moca, hcna, voip, vdsl2) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Page 175 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Ethernet Service Layer CFM Example 1: (single tagged VLAN) AXS2200> show stats mep ontport au-5-1-1-enet-1 =============================================================================== ONT MEP Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Port: au-5-1-1-enet-1 S-VID: 100 C-VID: MD Level: 3 MEP ID: 2 MEP Direction : up Next LBM Transaction ID: 10 Rx LBM Packets: 5 Rx LBR In-Order Packets: 4 Rx LBR Out-of-Order Packets: 0 Rx LBR Bad MSDU Packets: 0 Rx LTM Packets: 4 Rx LTR Unexpected Packets: 0 Tx LBM Packets: 4 Tx LBR Packets: 5 Tx LTR Packets: 4 =============================================================================== Command completed successfully Example 2: (double tagged VLAN) AXS2200> show stats mep ontport au-5-1-1-enet-1 =============================================================================== ONT MEP Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Port: au-5-1-1-enet-1 S-VID: 16 C-VID: 50 MD Level: 3 MEP ID: 2 MEP Direction : up Next LBM Transaction ID: 10 Rx LBM Packets: 5 Rx LBR In-Order Packets: 4 Rx LBR Out-of-Order Packets: 0 Rx LBR Bad MSDU Packets: 0 Rx LTM Packets: 4 Rx LTR Unexpected Packets: 0 Tx LBM Packets: 4 Tx LBR Packets: 5 Tx LTR Packets: 4 =============================================================================== Command completed successfully Error Codes Invalid port VLAN not found MEP/MIP not found Invalid ONT connection endpoint Page 176 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 177 Ethernet Service Layer CFM AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV IPTV del iptv chbwtable name (name) Description This command deletes the entry in the IPTV Channel Bandwidth Table identified by the name. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message This will delete a bandwidth table, which may be in use for IPTV service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del iptv chbwtable name sdtv This will delete a bandwidth table, which may be in use for IPTV service. Do you want to continue? y | n > y Command completed successfully Error Codes Name not found Page 178 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV del profile iptv name (name) Description This command deletes the entry in the IPTV Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile iptv name silver Command completed successfully Error Codes qbdef profiles cannot be deleted Default profiles cannot be deleted Profile name not found in Profile Table Profile in use Page 179 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV modify vlan-member-mcast svid (svlanid) ont (ontdataaddress) iptv-profile (profile) Description Assigns an IPTV profile to an ONT member of the Multicast VLAN. User Privilege Level: Superuser Required Parameters: iptv-profile profile Indicates IPTV profile by name svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. ont ontdataaddress Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (enet, moca, hcna, vdsl2) - index (1-n) Default Values When the command is not entered, the default iptv-profile is qbdef. Confirmation Message You have elected to modify a VLAN member, which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> modify vlan-member-mcast svid 306 ont au-5-1-1-enet-1 iptv-profile qbdef You have elected to modify a VLAN member, which may temporarily affect service. Do you want to continue? y | n > y Command completed successfully Page 180 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV Error Codes ONT Invalid port ONT data port is not a member of the MCVLAN Profile name not found in Profile Table Specified VLAN is not mcast type VLAN not found Page 181 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV set iptv chbwtable name (name) svid (svlanid) ipmaddrlow (value) ipmaddrhigh (value) cir (chcir) pir (chpir) ipsrcaddr (value) Description Defines an entry of multicast channel(s) with or without a specific source address in the channel bandwidth table. Up to 10 entries may be defined per MCVLAN, and the range of group addresses of one entry could not overlap with that of another. These settings are used to allocate bandwidth to IPTV channels based on the group address (and source IP address if it exists). Note: no two group IP addresses belonging to the same MCVLAN (either in the same channel bandwidth table entry or from different entries) are allowed to be mapped to the same multicast MAC address, i.e., the low order 23 bits of these two IP addresses can not be identical. Our system always allows group address 224.0.0.y to be accepted. 224.0.0.y could therefore be considered as a statically joined multicast address. For this reason we'll explicitly deny group addresses with format of x.0.0.y and x.128.0.y (which maps to the same multicast MAC address as 224.0.0.y), x ranges from 224 to 239, y ranges from 1 to 255. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. value ipmaddrlow Specifies the class D IP address to use for the low end of the range of IP addresses of this entry. value ipmaddrhigh Specifies the class D IP address to use for the high end of the range of IP addresses of this entry. cir chcir Indicates the bandwidth to use for the committed information rate. Valid values are from 0.1 to 20.0 Mb/s in steps of 0.1 Mb/s. pir chpir Indicates the bandwidth to use for the peak information rate. Valid values are from 0.1 to 20.0 Mb/s in steps of 0.1 Mb/s. svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Optional Parameters: ipsrcaddr value The IP address of the source of a multicast stream. It is a unicast IP address in the dotted decimal format. Default Values None. Page 182 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set iptv chbwtable name sdtv svid 306 ipmaddrlow 239.192.0.0 ipmaddrhigh 239.192.2.255 cir 3.8 pir 3.8 Command completed successfully Example 2: AXS2200> set iptv chbwtable name sdtv2 svid 306 ipmaddrlow 224.192.3.0 ipmaddrhigh 224.192.3.255 cir 3.8 pir 3.8 ipsrcaddr 193.168.1.2 Command completed successfully Error Codes Multicast IP address x.0.0.y or x.128.0.y not allowed Specified VLAN is not mcast type VLAN not found Maximum number of table entries reached Name already in use CIR must be equal to or less than PIR Invalid cir Invalid ipmaddrhigh Invalid ipmaddrlow Invalid name Invalid pir invalid source IP address Low order 23 bits of multiple IP addresses identical in this MCVLAN Page 183 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV set profile iptv default-name (name) Description Sets the name of the IPTV profile to use as the default for all new ONT data ports. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set profile iptv default-name silver This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 184 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV set profile iptv name (name) maxch (value) maxbw (value) Description Defines an IPTV profile that will be applied to an ONT. This profile table supports up to 50 user-defined entries. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: maxbw value Indicates the maximum amount of bandwidth permitted for IPTV services. Valid values are from 5 to 100 Mbps, in steps of 0.1 Mb/s. maxch value Indicates the maximum number of channels permitted. Valid values are from 1 to 64 Default Values maxch = 1 maxbw = 5 Mb/s Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile iptv name bronze maxch 3 maxbw 30.0 Command completed successfully Error Codes Maximum number of allowed profiles exceeded Invalid maxbw Invalid maxch Invalid name Name already in use At least one attribute is required to be set Page 185 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV set vlan-mcast svid (svlanid) disable-loch-alarm Description Disable Loss-of-Channel Alarm of a MCVLAN. Initially when the mcvlan is created, the default behavior is: the Loss-of-Channel Alarm is enabled with alarm-threshold of 5 seconds. User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. disable-loch-alarm Default Values Confirmation Message This will affect the Loss-of-Channel alarm settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200>set vlan svid 318 disable-loch-alarm This will affect the Loss-of-Channel alarm settings. Do you want to continue? y | n >y Command completed successfully Error Codes Specified VLAN is not mcast type VLAN not found Page 186 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV set vlan-mcast svid (svlanid) enable-loch-alarm alarm-threshold ((5 - 65535)) Description Enable Loss-of-Channel Alarm, and specifies the time interval before we raise or clear the alarm. Initially when the mcvlan is created, the default behavior is: the Loss-of-Channel Alarm is enabled with alarm-threshold of 5 seconds. User Privilege Level: Superuser Required Parameters: enable-loch-alarm alarm-threshold (5 - 65535) Loss-of-channel alarm threshod, in seconds svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values Confirmation Message This will affect the Loss-of-Channel alarm settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set vlan svid 318 enable-loch-alarm alarm-threshold 10 This will affect the Loss-of-Channel alarm settings. Do you want to continue? y | n >y Command completed successfully Error Codes Specified VLAN is not mcast type Invalid alarm threshold setting VLAN not found Page 187 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV set vlan-mcast svid (svlanid) mode ({snooping | proxy-reporting}) Description Specifies IGMP mode of an MCVLAN. User Privilege Level: Operator Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. mode {snooping | proxy-reporting} Specifies igmp mode of the MCVLAN Default Values mode = snooping Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set vlan svid 318 mode proxy-reporting Command completed successfully Error Codes Specified VLAN is not mcast type VLAN not found Page 188 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show igmp Description Displays IGMP version for the OLT system. Version: v3 Note: IGMP mode (snooping vs. proxy-reporting is displayed as VLAN property) User Privilege Level: Operator Default Values Confirmation Message Command completed successully Example(s) Example 1: AXS2200> show igmp =============================================================================== IGMP CONFIGURATION REPORT DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== Version: v3 =============================================================================== Command completed successully Error Codes Page 189 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show iptv chbwtable svid (svlanid) Description Displays the contents of the IPTV channel bandwidth table for the specified multicast VLAN. When svid is not specified, channel bandwidth table entries for all VLANs should be displayed. Multicast VLAN ID VLAN Name: Name of the Multicast VLAN For each entry in the Channel Bandwidth Table, display the following: - Name: Name of the table entry - Multicast IP Address Low: The Class D IP address for the low end of the range - Multicast IP Address High: The Class D IP Address for the hgh end of the range - Multicast Source IP Address: The Unicast IP address of the source of multicast stream - CIR: The Committed Information Rate per channel in Mb/s - PIR: The Peak Information Rate per channel in Mb/s User Privilege Level: Operator Optional Parameters: svid svlanid Identifies the S-VLAN Default Values When svid is not specified, entries for all Multicast VLANs should be displayed. Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show iptv chbwtable svid 306 =============================================================================== IPTV CHANNEL BANDWIDTH REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Multicast VLAN ID: 306 VLAN Name: Name ---------sdtv hdtv pip Multicast IP Address Low ------------239.0.0.0 239.128.0.0 239.255.0.0 Multicast IP Address High -----------239.0.255.255 239.128.255.255 239.255.255.255 Source IP Address ----------193.168.1.2 - CIR / PIR (Mb/s) ----- ----3.8 / 4.8 19.0 / 19.0 1.0 / 1.0 =============================================================================== Command completed successfully Error Codes Table is empty Specified VLAN is not mcast type VLAN not found Page 190 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show ont iptv (ontaddress) Description Displays the IPTV settings for all the applicable ports on the GPON ONT. Displayed fields include: - ONT Name - ONT Serial Number: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - ONT Channel on the PON - ONT Address (AID) - OLT PON Card Type - Actual ONT Card Type for the port (the ONT card type may be virtual). - For each data port, the following attributes are shown: - Port Address (AID) - MCVLAN ID and name (if any) - IPTV Profile - IPTV State: enable, disable IPTV profile and state will be displayed only if MCVLAN is configured on the port. User Privilege Level: Operator Required Parameters: ontaddress iptv Indicates the ONT address. Valid values are: - oltslot-port-channel (e.g. au-5-1-1) Valid choices for the address parameters are: - oltslot (au-1 through au-18 for AXS2200, au-1 through au-14 for AXS1800) - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (MDU) AXS2200> show ont iptv au-5-1-1 =============================================================================== ONT IPTV REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 1 ONT Address (AID): au-5-1-1 OLT PON Card: AGPONC Page 191 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Port AID -------enet-1 enet-2 enet-3 enet-4 enet-5 enet-6 enet-7 enet-8 enet-9 enet-10 enet-11 enet-12 IPTV MCVLAN ID (name) -------------------306 (mcvlan-306) 306 (mcvlan-306) 306 (mcvlan-306) 306 (mcvlan-306) 306 (mcvlan-306) 306 (mcvlan-306) 306 (mcvlan-306) - IPTV Profile ------------------silver silver bronze bronze qbdef gold gold - IPTV State ---------enable enable enable enable disable enable enable - =============================================================================== Command completed successfully Example 2: (SFU) AXS2200> show ont iptv au-5-1-1 =============================================================================== ONT IPTV REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 1 ONT Address (AID): au-5-1-1 OLT PON Card: AGPONC Port AID -------enet-1 MCVLAN ID (name) ------------------306 (mcvlan-306) IPTV Profile -------------------silver IPTV State ---------enable =============================================================================== Command completed successfully Error Codes ONT does not support this functionality ONT does not exist Page 192 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show ont igmp (ontaddress) Description Displays the IGMP settings for the ONT system. ONT Mode: snooping Version: v3 For a pre-provisioned ONT, it displays: ONT Mode: unknown Version: unknown The reports do not depend on whether a multicast VLAN is configured, or whether any ONT port is added to the multicast VLAN. User Privilege Level: Superuser Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Command completed successully Example(s) Example 1 AXS2200> show ont igmp au-4-1-1 =============================================================================== IGMP CONFIGURATION REPORT DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== ONT Mode: snooping Version: v3 =============================================================================== Command completed successully Example 2 (pre-provisioned ONT) AXS2200> show ont igmp au-4-1-1 =============================================================================== IGMP CONFIGURATION REPORT DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== ONT Mode: unknown Version: unknown =============================================================================== Command completed successully Page 193 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV Error Codes Invalid ONT Page 194 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show profile iptv name (name) Description Displays the contents of the IPTV profile table. Displayed parameters are: Name: The user-defined name for the profile entry MaxCh: Maximum number of IPTV channels allowed MaxBW: Maximum amount of IPTV/TGMP traffic allowed User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values If no name is provided, all IPTV profiles will be shown. Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show profile iptv =============================================================================== IPTV PROFILE REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Default: qbdef Name -------------------qbdef bronze silver gold MaxCh ---------1 3 6 15 MaxBW (Mb/s) ------------5.0 10.0 20.0 40.0 =============================================================================== Command completed successfully Example 2: (specific entry) AXS2200> show profile iptv name silver =============================================================================== IPTV PROFILE REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Default: qbdef Name -------------------silver MaxCh ---------6 MaxBW (Mb/s) ------------20.0 =============================================================================== Command completed successfully Page 195 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV Error Codes Profile name not found in Profile Table Page 196 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show stats igmp pon (slot-port) svid (svlanid) Description Displays the IGMP statistics for the PON port and MCVLAN. Reported counters are: IGMP Joins (In-Range) IGMP Joins (Out-of-Range) IGMP Leaves IGMP Join Errors IGMP Leave Errors IGMP Protocol Errors Denied Joins (Insufficient Bw) The counters are reset when the PON card is reset. Note: In-range joins refer to the IGMP join messages whose group address (and source address if exists) is defined in one of the Channel Bandwidth Table entries. Denied Joins (Insufficient Bw) refers to the joins denied due to total required bandwidth exceeding mcast-down-bw. User Privilege Level: Operator (basic CLI) Required Parameters: igmp pon slot-port Identifies the PON by the OLT card port address. svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats igmp pon au-5-1 svid 306 =============================================================================== IGMP STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Address: au-5-1 Card Type: AGPONB Port Oper State: up Page 197 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV IGMP Joins (In-Range): 2399477 IGMP Joins (Out-of-Range): 0 IGMP Leaves: 2774993 IGMP Join Errors: 32 IGMP Leave Errors: 0 IGMP Protocol Errors: 0 Denied Joins (Insufficient Bw): 0 =============================================================================== Command completed successfully Error Codes PON port is secondary - use primary PON port address Specified VLAN is not mcast type VLAN not found Invalid port Page 198 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show stats iptv pon (slot-port) svid (svlanid) Description Displays the IPTV Channel statistics for the PON and the specified MCVLAN. User Privilege Level: Operator Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. pon slot-port Identifies the PON by the OLT card port address. iptv Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats iptv pon au-5-1 svid 306 =============================================================================== IPTV CHANNEL STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Channels currently in use: Number of Unique Channels: 304 Total Bandwidth for all Channels: 96.3 Mb/s Details for the top 256 Channels: Rank ---1 2 3 . . . 256 Group IP Address ---------------239.0.56.123 239.128.33.255 239.255.60.22 Current Members --------------73 70 62 Channel Bandwidth (Mb/s) -----------------------3.8 19.0 19.0 239.0.123.44 1 1.0 =============================================================================== Command completed successfully Page 199 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV Error Codes Invalid port No IPTV bandwidth table exists Specified VLAN is not mcast type VLAN not found PON port is secondary - use primary PON port address Page 200 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show stats ont igmp (ontdataaddress) bin ({current | history}) Description Displays the IGMP statistics for ONT data port. ONT statistics are measured in 15-minute bins: current and history. The 15-minute intervals are aligned on the hour, and synchronized with the OLT. The report header shows: - ONT Name - ONT Serial Number - ONT Channel on the PON - ONT Address (AID) - OLT PON Card Type - ONT Operating Status - ONT Port Address - ONT Port Type - Whether the current bin or history bin has been requested. - IGMP Joins (In-Range) IGMP Joins (Out-of-Range) IGMP Leaves IGMP Join Errors IGMP Leave Errors IGMP Protocol Errors Denied Joins (Insufficient Channels) Denied Joins (Insufficient Bw) Note: In-range joins refer to IGMP join messages whose group address (and source address if exists) is defined in one of the Channel Bandwidth Table entries. User Privilege Level: Operator Required Parameters: ontdataaddress Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (enet, moca, hcna, vdsl2) - index (1-n) Optional Parameters: bin {current | history} Selects which statistics bin. - current selects the current counter that is still active - history selects the prior interval that has completed Page 201 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV Default Values bin=current Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats ont igmp au-5-1-1-enet-1 =============================================================================== ONT PORT IGMP STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 1 ONT Address (AID): au-5-1-1 OLT PON Card: AGPONB ONT Operating Status: active ONT Port: enet-1 ONT Port Type: ENET Bin: current IGMP Joins (In-Range): 2399477 IGMP Joins (Out-of-Range): 0 IGMP Leaves: 2774993 IGMP Join Errors: 32 IGMP Leave Errors: 0 IGMP Protocol Errors: 3 Denied Joins (Insufficient Channels): Denied Joins (Insufficient Bw): 0 23 =============================================================================== Command completed successfully Error Codes Invalid ONT ONT does not support this functionality No multicast VLAN configured on the port Invalid ONT equipment state for request Page 202 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV show stats ont iptv (ontdataaddress) Description Displays the number of active IPTV channels and total amount of IPTV bandwidth of the specified data port, and MCVLAN ID. Also displays the details of each active channel, including class D address, bandwidth, IP address of each active IGMP host, and the uptime and expiration time for each host. User Privilege Level: Superuser Required Parameters: ontdataaddress Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (enet, moca, hcna, vdsl2) - index (1-n) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats ont iptv au-5-1-1-enet-1 =============================================================================== ONT PORT IPTV USAGE STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 1 ONT Address (AID): au-5-1-1 OLT PON Card: AGPONB ONT Operating Status: active ONT Port: enet-1 ONT Port Type: ENET MCVLAN ID: 306 IPTV channels: 2 IPTV Bandwidth: 16.0 mbps ADDR ------------239.229.10.20 BW (mbps) --------8.0 239.229.80.20 8.0 Page 203 HOST ADDR ----------196.1.3.4 196.1.3.5 197.1.5.1 Up Since ------------------08/17/2007 11:12:22 08/17/2007 11:12:20 08/17/2007 08:03:11 Expire(sec) -------256 254 155 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA IPTV 197.1.5.2 197.1.5.3 08/17/2007 08:03:10 08/17/2007 08:03:10 154 154 ================================================================================ Command completed successfully Example 2: AXS2200> show stats ont iptv au-5-1-1-hcna-1 =============================================================================== ONT PORT IPTV USAGE STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 1 ONT Address (AID): au-5-1-1 OLT PON Card: AGPONB ONT Operating Status: active ONT Port: hcna-1 ONT Port Type: HCNA MCVLAN ID: 306 IPTV channels: 2 IPTV Bandwidth: 16.0 mbps ADDR ------------239.229.10.20 BW (mbps) --------8.0 239.229.80.20 8.0 HOST ADDR ----------196.1.3.4 196.1.3.5 197.1.5.1 197.1.5.2 197.1.5.3 Up Since ------------------08/17/2007 11:12:22 08/17/2007 11:12:20 08/17/2007 08:03:11 08/17/2007 08:03:10 08/17/2007 08:03:10 Expire(sec) -------256 254 155 154 154 ================================================================================ Command completed successfully Error Codes Invalid ONT ONT does not support this functionality Invalid ONT equipment state for request Page 204 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 205 IPTV AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA LLDP LLDP show ont lldp ont (ontaddress) Description This command allows the user to obtain an overview over the LLDP configuration on all the ports on a particular ONT. While LLDP is managed on a per-Ethernet Port basis, this command is designed to provide a quick summary of all the port states and key attributes. The report always includes these fields: - ONT Name - ONT Serial Number: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - ONT Channel on the PON - ONT Address (AID) - OLT PON Card: (AGPOND | AGPON8A etc...) followed by a table of (per enet port): Port AID: The ONT port address. Ports that are integrated into the main chassis are of the format "porttype-port". Ports that are on cards inserted into the ONT are of the format "slot-port". Actual Card Type: The actual card type for the port. Admin State: The administrative state of the port (enable or disable) Oper State: The operating state of the port (up, down, unk for unknown). LLDP Profile Name: The name of the port profile that is configured for the port. LLDP Admin State: The LLDP administrative state of the port (enabled | disabled) User Privilege Level: Operator Required Parameters: ont ontaddress Specifies the address of the ONT in the format: - oltslot-port-channel (e.g. au-5-1-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) Default Values Confirmation Message Command completed successully Example(s) Example 11: (WT21004 with LLDP enabled on port 1 for configuring a voip phone) AXS1800> show ont lldp ont au-3-1-6 =============================================================================== ONT LLDP SUMMARY REPORT DATE: 06/01/2010 TIME: 16:08:22 Page 206 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA LLDP =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPOND Port AID ---------enet-1 enet-2 enet-3 enet-4 Actual Card Type ---------------gige gige gige gige Admin State -------enable enable enable enable Oper State ----up up up up LLDP-MED Profile Name -----------pol21 qbdef qbdef qbdef LLDP Admin State ----------enabled disabled disabled disabled =============================================================================== Command completed successfully Error Codes Invalid ONT ONT does not support this functionality Page 207 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 208 LLDP AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA MAC Layer Troubleshooting MAC Layer Troubleshooting show mac-table ont (enetorponport) vlan (ontvlanid) Description Displays the MAC address forwarding table for the ONT port, which includes: - VLAN ID (which is the SVID for a single-tagged VLAN, or the CVID for a doubletagged VLAN) - MAC Address Only Learned MAC addresses are displayed. Directionality is determined by the port itself: - ONT Ethernet UNI port: displays MAC addresses learned from the CPE - ONT PON port: displays MAC addresses learned from the PON (i.e. OLT direction) This command is supported by a subset of ONTs. SF2xxxxx ONT platforms do not support the capability to filter for an individual VLAN. User Privilege Level: Operator Required Parameters: ont enetorponport Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot (au-1 thru au-18 for AXS2200, or au-1 thru au-14 for AXS1800) - port (1-8) - channel (1-64) - porttype (enet, pon) - index (1-n) Optional Parameters: vlan ontvlanid Indicates the VLAN id on the ONT. For single-tagged connections, it is the S-VLAN ID {2-4085} For double-tagged connections, it is the C-VLAN ID {2-4085} Default Values if VLAN ID is not provided, all VLANs will be shown Confirmation Message Command completed successfully Example(s) Page 209 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA MAC Layer Troubleshooting Example 1: (no vlan specified, Data port is a member of multiple single tagged VLANs) AXS2200> show mac-table ont au-5-1-1-enet-1 =============================================================================== ONT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== ONT Port: VLAN -----100 100 100 101 150 567 au-5-1-1-enet-1 MAC ADDRESS ----------------00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 20:21:cd:22:34:56 32:8a:9b:7c:11:ab 54:00:ab:cc:de:f1 =============================================================================== Command completed successfully Example 2: (no VLAN specified, data port is a member of one double tagged VLAN) AXS2200> show mac-table ont au-5-1-1-enet-1 =============================================================================== ONT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== ONT Port: VLAN -----20 20 20 au-5-1-1-enet-1 MAC ADDRESS ----------------00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 =============================================================================== Command completed successfully Example 3: (VLAN specified, ONT PON port) AXS2200> show mac-table ont au-5-1-1-pon vlan 100 =============================================================================== ONT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== ONT Port: VLAN -----100 100 100 au-5-1-1-pon MAC ADDRESS ----------------00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 =============================================================================== Command completed successfully Example 4: (no entries in the MAC table) AXS2200> show mac-table ont au-5-1-1-pon vlan 200 No MAC table entries exist Page 210 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA MAC Layer Troubleshooting Command completed successfully Example 5: (no vlan specified, Data port is a member of multiple single tagged VLANs SF2xxxx ONT which does not support MAC learning by VLAN) AXS2200> show mac-table ont au-5-1-1-enet-1 =============================================================================== ONT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== ONT Port: VLAN -----n/a n/a n/a n/a n/a n/a au-5-1-1-enet-1 MAC ADDRESS ----------------00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 20:21:cd:22:34:56 32:8a:9b:7c:11:ab 54:00:ab:cc:de:f1 =============================================================================== Command completed successfully Error Codes no MAC table entries exist ONT does not support this functionality MAC Table does not include VLAN IDs for this ONT platform ONT is in wrong state for this request invalid vlan VLAN member not configured ONT Invalid port Page 211 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA MAC Layer Troubleshooting show mac-table port (wanorponport) svid (svlanid) Description Displays the MAC forwarding table for an OLT port, which includes: - S-VID - MAC address Only Learned MAC addresses are displayed. Directionality is determined by the port itself: - GPON port: displays MAC addresses learned from the PON - GbE/10GbE WAN port or LAG: displays MAC addresses learned from the network This command is valid for GPON cards and GigE WAN Linecards. User Privilege Level: Operator Required Parameters: port wanorponport Specifies one of the following ports: - GigE/10GigE WAN port (e.g. sw-a-1) - Link Aggregation group (e.g. lag-1) - PON port (e.g. au-5-1) Optional Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values if not provided, all S-VLAN IDs will be shown. Confirmation Message Command completed successfully Example(s) Example 1: (no svid specified) AXS2200> show mac-table port sw-a-1 =============================================================================== OLT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== OLT Port: sw-a-1 S-VID -----100 100 100 101 150 567 100 Page 212 MAC ADDRESS ----------------00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 20:21:cd:22:34:56 32:8a:9b:7c:11:ab 52:00:ab:cc:de:f1 78:ff:7a:2c:dd:0d AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA MAC Layer Troubleshooting =============================================================================== Command completed successfully Example 2: AXS2200> show mac-table port sw-a-1 svid 100 =============================================================================== OLT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== OLT Port: sw-a-1 S-VID -----100 100 100 100 MAC ADDRESS ----------------00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 78:ff:7a:2c:dd:0d =============================================================================== Command completed successfully Example 3: (no entries in the MAC table) AXS2200> show mac-table port sw-a-1 svid 200 No MAC table entries exist Command completed successfully Example 4: (Ethernet card) AXS2200> show mac-table port au-11-1 =============================================================================== OLT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== OLT Port: au-11-1 S-VID -----100 100 100 101 150 567 100 MAC ADDRESS ----------------00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 20:21:cd:22:34:56 32:8a:9b:7c:11:ab 54:00:ab:cc:de:f1 78:ff:7a:2c:dd:0d =============================================================================== Command completed successfully Example 5: (no svid specified) AXS2200> show mac-table port lag-1 =============================================================================== OLT PORT MAC FORWARDING TABLE DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== OLT Port: lag-1 S-VID ------ Page 213 MAC ADDRESS ----------------- AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 100 100 100 101 150 567 100 MAC Layer Troubleshooting 00:ab:cd:12:34:56 10:ab:cd:12:34:56 10:2a:dd:12:34:56 20:21:cd:22:34:56 32:8a:9b:7c:11:ab 54:00:ab:cc:de:f1 78:ff:7a:2c:dd:0d =============================================================================== Command completed successfully Error Codes no MAC table entries exist Port is not a VLAN member Invalid port Invalid slot Invalid svid VLAN not found Slot is empty Page 214 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 215 MAC Layer Troubleshooting AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Miscellaneous Discretes Miscellaneous Discretes del chassis misc-input (number) Description Deletes the user-configured name for the miscellaneous discrete input, changes it to default value ("No Message"), and sets the monitoring value to disable. User Privilege Level: Superuser Required Parameters: misc-input number Identifies the miscellaneous discrete input by its number {1-7}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del chassis misc-input 2 Command completed successfully Error Codes Invalid misc-input id Page 216 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Miscellaneous Discretes set chassis misc-input (number) ({enable | disable}) name (miscname) Description Enables or disables the miscellaneous discrete input, and optionally sets a user-defined name to the input. The system supports seven miscellaneous discrete inputs. Miscellaneous inputs may be things such as visible lights or audible alarms that are controlled through connections to the rear of the chassis. Names may be changed using this command without having to delete the misc-input first. User Privilege Level: Superuser Required Parameters: misc-input number Identifies the miscellaneous discrete input by its number {1-7}. {enable | disable} Indicates enabling or disabling of selected component or feature. Optional Parameters: name miscname Indicates the user-defined name for the miscellaneous discrete input. It is an string of up to 20 alphanumeric characters, plus "-" (dash) and "_" (underscore) characters. NOTE: A single numeric value between 1 and 7 is not valid for a miscellaneous input name. Default Values Initial value: "No Message" for all miscnames Initial value: Monitoring state=enable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set chassis misc-input 2 enable name opendoor Command completed successfully Example 2: AXS2200> set chassis misc-input 6 disable Command completed successfully Error Codes Invalid misc-input id Page 217 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Miscellaneous Discretes show misc-inputs Description Displays the seven miscellaneous inputs supported by the OLT, their current monitor value (enable or disable), the input state (on, off or "-" if not enabled), and the user-defined name of each miscellaneous input. User Privilege Level: Operator Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show misc-inputs =============================================================================== MISCELLANEOUS INPUTS REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Misc Input# Monitor Input State Name ----------- -------- ----------- -------------------1 enable ON door-ajar 2 enable OFF high-temp 3 disable No Message 4 disable No Message 5 disable No Message 6 disable No Message 7 disable No Message =============================================================================== Command completed successfully Error Codes Page 218 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 219 Miscellaneous Discretes AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA NVM/PCMCIA NVM/PCMCIA del nvm version (version-id) Description Deletes the directory on the system controller non-volatile memory. All files and subdirectories are also deleted, including any backups for the version specified. Any versions that are accepted or running in the OLT are not allowed to be deleted. User Privilege Level: Admin Required Parameters: version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. Default Values Confirmation Message This will delete all files and subdirectories for the version name. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del nvm version release1 This will delete all files and subdirectories for the version name. Do you want to continue? y | n >y Command completed successfully Error Codes Accepted version cannot be deleted from the OLT Failed to delete file <filename> Running version cannot be deleted from the OLT Version not found Page 220 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA NVM/PCMCIA show nvm Description Shows the current status of the Non Volatile Memory on the System Controller for electronic storage of software versions and backups. The output report will display the amount of disk space that is available. User Privilege Level: Operator Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show nvm =============================================================================== NVM REPORT DATE: 01/17/2001 TIME: 16:08:22 =============================================================================== NVM is Enabled Total Disk Space: 256.0 MB Disk Space Used: 50.0 MB Disk Space available: 206.0 MB =============================================================================== Command completed successfully Error Codes Command failed Page 221 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 222 NVM/PCMCIA AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment ONT Equipment add ont ({slot-port | slot-port-channel}) type (ont-type-gpon) registration-id (regid) Description This command pre-provisions an ONT of the specified type to the desired address. The PON port must be provided by the operator, and the channel ID may additionally be provided. If the channel ID is not provided by the operator, then the OLT will automatically assign an available channel ID. If ONT registration is configured (by setting the attribute for ont-channelassignment to registration), then the registration ID is required. If ONT registration is not configured, then the registration ID is not allowed. Once the command has been executed, all port and connection provisioning may be performed. When the target physical ONT has been installed on the PON and ranged, the provisioning settings can be applied by either the registration process (if configured) or by using the "copy ont" CLI command. Note that preprovisioned ONTs do not report alarms. Additionally, the following operations are not available to PreProvisioned ONTs: software download, software version accept, database backup, equipment reset, range, viewing statistics, setting the ONT state, and setting the channel ID using the "set ont <sn> channel <channel>" command. User Privilege Level: Superuser Required Parameters: type ont-type-gpon Indicates the GPON ONT type. The valid values are: - ont1000g (which includes the family of product codes for ONT1000Gx) - ont1120g (which includes the family of product codes for ONT1120Gx) - ont1100g (which includes the family of product codes for ONT1100Gx) - ont1400g (which includes the family of product codes for ONT1400Gx) - ont1400gt2 (which includes the family of ont1400gt2) - ont1420g (which includes the family of product codes for ONT1420Gx) - ont1500g (which includes the family of product codes for ONT1500Gx) - ont6000gvt (which includes the family of product codes for ONT6000GVT) - ont6000get (which includes the family of product codes for ONT6000GETs) - sf21000 (which includes the family of product codes for SF21000s) - sf24200 (which includes the family of product codes for SF24200s) - sf24210 (which includes the family of product codes for SF24210s) - sf24200b (which includes the family of product codes for SF24200Bs) - wg24200g (which includes the family of product codes for WG24200Gs) - wt21004 (which includes the family of product codes for WT21004s) - md22000 (which includes the family of product codes for MD22000s) - md24000 (which includes the family of product codes for MD24000s) - md26000 (which includes the family of product codes for MD26000s) - wg24200n (which includes the family of product codes for WG24200Ns) {slot-port | slot-port-channel} Specifies the address of the desired PON port, or the desired ONT. Valid choices for the address parameters are: Page 223 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) If the channel is not provided, the OLT will automatically select an available channel. Optional Parameters: registration-id regid Indicates the value for the Registration ID. It is a string of alphanumeric characters, up to a maximum length of 10 numbers. Special characters are not allowed. For example: 1234567890 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (Registration is not configured) AXS2200> add ont au-3-1-1 type ont1000g Command completed successfully Example 2: (Registration is configured) AXS2200> add ont au-3-1-1 type sf24200 registration-id 0198777002 Command completed successfully Error Codes PON port is secondary - use primary PON port address Invalid ont type Invalid ONT PON - Bandwidth unavailable Channel ID already used on this PON Invalid port state Registration ID contains unsupported characters Registration ID exceeds maximum length Registration ID is not valid for ont-channelassignment set to auto or manual Registration ID is required when ont-channelassignment is set to registration Invalid PON port Registration ID already in use by a provisioned ONT (duplicate) Matched Registration ID to an ONT pending SN Authentication Matched Registration ID to an ONT that failed SN authentication Matched Registration ID to an ONT with mismatched type Page 224 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment copy ont from (ontaddress) to newsn (sn) Description This command is used to move configuration settings for an ONT to another ONT by specifying the serial number of the replacement ONT. It can be used to replace faulty equipment with good equipment while maintaining configuration settings. It may also be used to move service configurations from a PreProvisioned ONT to one that is physically on the PON and has been ranged. The "From" ONT must by removed physically from the PON. The "To" ONT must not have any connections configured, and must not be in the process of receiving a software download. Before executing this operation, the user should ensure that the ONT types support the same functionality. The command is not allowed for ONTs that are pending serial number authentication. User Privilege Level: Superuser Required Parameters: from ontaddress Specifies the address of the ONT in this format: - oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) to newsn sn This is the FSAN serial number for the new ONT that is physically installed on the PON. It consists of 4 alphabetic characters followed by 8 hexidecimal numbers. For example, MRCC12345678 Default Values none Confirmation Message This moves all services to the new ONT SN, overwriting any prior settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> copy ont from au-3-1-1 to newsn MOCC12345678 This moves all services to the new ONT SN, overwriting any prior settings. Do you want to continue? y | n > y Command completed successfully Page 225 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment Error Codes ONT Registration IDs are mismatched ONT (to) is not in correct state ONT equipment is incompatible ONT (from) does not exist ONT (to) serial number does not exist ONTs are not on the same PON Video connection is established ONT with new sn must not have connections configured ONT (from) is not in correct state ONT is pending serial number authentication Page 226 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment reset ont (ontaddress) image ({0 | 1}) priority ({normal | override}) Description Performs a reset equivalent to pressing the RESET button of the ONT. This command is not allowed during a software download or when the ONT is operating on battery backup. This will reset an Emergency-Stopped ONT ONLY for when the user issues this as a priority override command without an image specified, and the ONT has a vendor ID of MRCC or QMBG. The priority is ignored for ONTs that do not support POTS interfaces. User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Optional Parameters: {0 | 1} image Indicates the desired software image on the ONT. priority {normal | override} Indicates the priority of the command. - normal: The operation will be prohibited if any POTS lines are off-hook - override: The operation will be allowed regardless of the state of the POTS lines. Default Values image = Currently accepted image, if none specified priority = normal, if not specified Confirmation Message Do you want to proceed? y|n This is followed by an autonomous message that indicates the ONT has been reset, and will follow with messages indicating the connections have been recovered if the auto-recovery feature is enabled. Example(s) Example 1: (default priority of normal, specifying the image) AXS2200> reset ont au-3-3-16 image 1 Do you want to proceed? y|n >y Command completed successfully Page 227 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment Example 2: (default priority of normal, default accepted image) AXS2200> reset ont au-3-3-16 Do you want to proceed? y|n >y Command completed successfully Example 3: (Force a reset of the ONT regardless of the state of POTS services) AXS2200> reset ont au-3-1-1 image 0 priority override Do you want to proceed? y|n >y Command completed successfully Error Codes Invalid ONT Cannot reach ONT Invalid for pre-provisioned ONTs without serial numbers Invalid ONT equipment state for request POTS line is off-hook. Retry later. File not found on ONT NVM Page 228 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment reset ont (ontaddress) version ({version | current}) priority ({normal | override}) Description Performs a reset equivalent to pressing the RESET button of the ONT. This command is not allowed during a software download or when the ONT is operating on battery backup. The priority is ignored for ONTs that do not support POTS interfaces. This will reset an Emergency-Stopped ONT ONLY for when the user issues this as a priority override command without a version specified, and the ONT has a vendor ID of MRCC or QMBG. User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Optional Parameters: version {version | current} Specifies the desired software version, as indicated by the directory name stored on the OLT system controller card. The version can take up to 14 characters in length. Or use "current" to indicate the currently accepted software image. priority {normal | override} Indicates the priority of the command. - normal: The operation will be prohibited if any POTS lines are off-hook - override: The operation will be allowed regardless of the state of the POTS lines. Default Values version = Currently accepted version, if none specified priority = normal, if not specified Confirmation Message Are you sure? y|n >y This is followed by an autonomous message that indicates the ONT has been reset, and will follow with messages indicating the connections have been recovered if the auto-recovery feature is enabled. Example(s) Example 1: Page 229 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment (version provided) AXS2200> reset ont au-3-3-16 version moto1 Are you sure? y|n >y Command completed successfully Example 2: (current version used by default) AXS2200> reset ont au-3-1-16 Are you sure? y|n >y Command completed successfully Example 3: (Force a reset of the ONT regardless of the state of POTS services) AXS2200> reset ont au-3-1-1 priority override Are you sure? y|n >y Command completed successfully Example 4: (reset ont specifying all optional parameters) AXS2200> reset ont au-3-1-1 version V6-1 priority override Are you sure? y|n >y Command completed successfully Example 5: (Force a reset of an ONT that is in the E-Stop state and has a vendor ID of MRCC or QMBG) AXS2200> reset ont au-3-1-1 priority override Are you sure? y|n >y Command completed successfully Error Codes Invalid ONT Invalid ONT equipment state for request Invalid for pre-provisioned ONTs without serial numbers Cannot reach ONT POTS line is off-hook. Retry later. File not found on ONT NVM Page 230 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment set alarm ont-flapping-alarms flap-suppression-time (value) state ({active | inactive}) Description This command is used to activate / inactivate chassis wide monitoring of flapping alarms condition. Suppressing of flapping alarms is globally activated or deactivated using the state variable. Note that the command specifies two parameters: flap-suppression-time and state. Both of them are defined as optional but one of them has to be specified. User Privilege Level: Admin Optional Parameters: flap-suppression-time value A sliding time interval, measured in seconds, during which a managed object is monitored for a new alarm. The interval restarts each time a new alarm is raised. Valid flap-suppression-time is between 5 seconds and 900 seconds. state {active | inactive} Sets the state to active or inactive. Default Values flap-suppression-time 120 seconds state active Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set alarm ont-flapping-alarms state active flap-suppression-time 60 Command completed successfully Example 2: AXS2200> Set alarm ont-flapping-alarms state inactive Command completed successfully Example 3: AXS2200> Set alarm ont-flapping-alarms state inactive flap-suppression-time 60 Command completed successfully Error Codes Invalid flap-suppression-time Page 231 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment set holdpotsbias ({ontaddress | slot}) duration (timervalue) Description Manual Force of Bias Voltage: When executed will cause the identified ONT or all ONTs off a PON card to hold the POTS bias for a configurable amount of time. The duration value ranges from 0 (means forced bias voltage is disabled) to 1440 minutes. If no value is supplied, a default of 5 minutes will be used. User Privilege Level: Superuser Required Parameters: {ontaddress | slot} Indicates a specific ONT address or the OLT slot address. The ONT address is slot-port-channel: - slot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) The OLT slot address is slot: - slot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} Optional Parameters: duration timervalue Value in minutes for which the system should hold the forced bias voltage on the ONT POTS. Valid range is 0 to 1440 in steps of 5 with a default of 5. Unit is minutes. Default Values duration=5 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set holdpotsbias au-3-4-16 duration 60 Command completed successfully Error Codes Invalid value ONT is in wrong state for this request ONT with the preprovisioned AID does not exist Invalid equipment state for request Invalid slot ONT does not exist Page 232 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment show ont chassis (ontaddress) Description Shows the chassis information provided by the specified ONT. Reported fields include: Name: The user-defined name for the ONT. SN: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). Registration ID: The provisioned registration ID for the ONT, or none Learned Registrion ID: The registration ID value learned from the ONT, or n/a for a preprovisioned ONT ONT Channel on the PON: 1-64 ONT Address (AID): The address for the ONT in the format oltslot-port-channel OLT PON Card Type: The type of PON card (e.g. AGPONC). Equipment Code: Indicates the equipment code of the ONT. For Motorola-supported ONT's, this is the CLEI code. If a preprovisioned ONT, will report "none". ONT Type: Indicates the ONT type for provisioning (e.g. ONT1000G, ONT1500G, etc) Product Code: Indicates the product code of the ONT as reported by the ONT. If the ONT is pre-provisioned and has not yet been copied to an actual physical ONT, then the value is reported as unknown. MAC Address: The MAC address of the ONT (used for Ethernet CFM), or unknown if preprovisioned ONT System Uptime (seconds): The duration of time since the ONT has been last reset, provided in seconds. Optical property on the PON: hiopticalinpwralarm and lowopticalinpwralarm. Battery Backup: Provisioned or Not Provisioned. AdminState: Administrative state of the ONT (e-stop, enable) Oper Status: Displays the current status of the ONT. The values are: - active (ONT is active) - ranging (ONT is being ranged) - fault (ONT has suffered an equipment failure) - ooc (out-of-contact: ONT ranging process retries have timed out, or other failures are preventing the OLT from contacting the ONT). - e-stop (emergency-stop: ONT has been set to the Emergency Stop state) - dwnld (download: software is being downloaded to the ONT) -- see *Note - battoper (battery-operation: ONT is operating on battery backup) -- see *Note Note: There is an additional ONT state that is supported, but would not be applicable for this command (unassigned: ONT has no channel ID assigned) Fault Reason: Indicates the current ONT fault, or noFaultDetected if there is no current fault detected, or n/a if the ONT is preprovisioned, out-of-contact or in the e-stop state. Voice Service Type: {unspecified, PBX, Payphone, Residential} Operating Forwarding Mode: switched, isolated ONT-Profile: The name of the assigned ONT-Profile. - Voice Mode: voip, tdm or eh248 - Enet Power Shedding Delay: 0,1,15-64800 seconds - MoCA Power Shedding Delay: 0,1,15-64800 seconds - HCNA Power Shedding Delay: 0,1,15-64800 seconds - VDSL2 Power Shedding Delay: 0,1,15-64800 seconds - DS1/E1 Power Shedding Delay: 0,1,15-64800 seconds - RF Video Power Shedding Delay: 0,1,15-64800 seconds - Reboot Hold POTS bias: 0-65535 seconds - MAC Aging (seconds): 0-65535 - DoS Protection: enable, disable - Forwarding Mode: chassis-fwdmode, switched, isolated DSCP Map Profile: The name for the assigned dscpmap profile Page 233 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment - The mapping of DSCP value to pbit0 - The mapping of DSCP value to pbit1 - The mapping of DSCP value to pbit2 - The mapping of DSCP value to pbit3 - The mapping of DSCP value to pbit4 - The mapping of DSCP value to pbit5 - The mapping of DSCP value to pbit6 - The mapping of DSCP value to pbit6 P-Bit Profile: The name of the assigned pbitremap profile. - The mapping of input pbit0 to outgoing pbit value - The mapping of input pbit1 to outgoing pbit value - The mapping of input pbit2 to outgoing pbit value - The mapping of input pbit3 to outgoing pbit value - The mapping of input pbit4 to outgoing pbit value - The mapping of input pbit5 to outgoing pbit value - The mapping of input pbit6 to outgoing pbit value - The mapping of input pbit7 to outgoing pbit value ONT QoS Profile - The name of the ONT QoS profile. - allstrictprio: {enable | disable} - mappbit0-cos: {0-3} - mappbit1-cos: {0-3} - mappbit2-cos: {0-3} - mappbit3-cos: {0-3} - mappbit4-cos: {0-3} - mappbit5-cos: {0-3} - mappbit6-cos: {0-3} - mappbit7-cos: {0-3} - cos0weight: {0-100} - cos1weight: {0-100} - cos2weight: {0-100} - voip-sig-pbit: {0-7} - voip-bear-pbit: {0-7} - voip-sig-dscp: {0-63} - voip-bear-dscp: {0-63} - igmp-pbit: {0-7} - ratelimit: {enable | disable} SW Images: For each image, shows the version name, whether it is valid, active and accepted. For preprovisioned ONTs, will show "none" as the version name. If the ONT supports an indicator for open door, then its status will be shown (open, closed). Otherwise it will report n/a. If the ONT supports miscellaneous inputs, then they will be shown, otherwise it will report n/a: - ID - Admin State (enable, disable) - Oper State (on, off, or -) - Name (If no name is configured, "No Message" is displayed) User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: Page 234 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show ont chassis au-3-4-16 =============================================================================== ONT CHASSIS REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Registration ID (provisioned): ONT Channel on the PON: 16 ONT Address (AID): au-3-4-16 OLT PON Card Type: AGPONC 009288767 [Learned: 009288767] Equipment Code: BVL290KAA ONT Type: ONT1000G Product Code: ONT1000GT2 MAC Address: 00-11-22-33-44-55 System Uptime (seconds): 873992 High Optical RX Power Alarm Threshold (dBm): -12.4 Low Optical RX Power Alarm Threshold (dBm): -25.0 Battery Backup: provisioned AdminState: enable Oper Status: active Fault Reason: noFaultDetected Voice Service Type: PBX Operating Forwarding Mode: isolated ONT-Profile: qbdef Voice Mode: tdm Enet Power Shedding Delay: 600 MoCA Power Shedding Delay: 600 HCNA Power Shedding Delay: 600 VDSL2 Power Shedding Delay: 600 DS1/E1 Power Shedding Delay: 600 RF Video Power Shedding Delay: 30 Reboot Hold POTS Bias: 60 MAC Aging (seconds): 300 DoS Protection: disable Forwarding Mode: chassis-fwdmode DSCP Map Profile: qbdef pbit0: 0,1,2,3,4,5,6,7 pbit1: 8,9,10,11,12,13,14,15 pbit2: 16,17,18,19,20,21,22,23 pbit3: 24,25,26,27,28,29,30,31 pbit4: 32,33,34,35,36,37,38,39 pbit5: 40,41,42,43,44,45,46,47 pbit6: 48,49,50,51,52,53,54,55 pbit7: 56,57,58,49,60,61,62,63 P-Bit Remap Profile: qbdef inbit0: 0 inbit1: 1 inbit2: 2 inbit3: 3 Page 235 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment inbit4: inbit5: inbit6: inbit7: 4 5 6 7 QoS Profile: qbdef allstrictprio: enable mappbit0-cos: 0 mappbit1-cos: 0 mappbit2-cos: 1 mappbit3-cos: 1 mappbit4-cos: 2 mappbit5-cos: 3 mappbit6-cos: 3 mappbit7-cos: 3 cos0weight: 10 cos1weight: 40 cos2weight: 50 voip-sig-pbit: 5 voip-bear-pbit: 6 voip-sig-dscp: 46 voip-bear-dscp: 24 igmp-pbit: 4 ratelimit: enable SW Image -------0 1 Version -------------version-new123 version-old123 Valid ----yes yes Active -----yes no Accepted -------yes no Open Door Status: n/a Miscellaneous Inputs: n/a =============================================================================== Command completed successfully Example 2: (Preprovisioned ONT) AXS2200> show ont chassis au-3-4-16 =============================================================================== ONT CHASSIS REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: pre-prov Registration ID (provisioned): none [Learned: n/a] ONT Channel on the PON: 16 ONT Address (AID): au-3-4-16 OLT PON Card Type: AGPONC Equipment Code: none ONT Type: ONT1000G Product Code: unknown MAC Address: unknown System Uptime (seconds): 0 High Optical RX Power Alarm Threshold (dBm): n/a Low Optical RX Power Alarm Threshold (dBm): n/a Battery Backup: provisioned AdminState: enable Oper Status: ooc Fault Reason: n/a Voice Service Type: PBX Operating Forwarding Mode: isolated ONT-Profile: Page 236 qbdef AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment Voice Mode: tdm Enet Power Shedding Delay: 600 MoCA Power Shedding Delay: 600 HCNA Power Shedding Delay: 600 VDSL2 Power Shedding Delay: 600 DS1/E1 Power Shedding Delay: 600 RF Video Power Shedding Delay: 30 Reboot Hold POTS Bias: 60 MAC Aging (seconds): 300 DoS Protection: disable Forwarding Mode: chassis-fwdmode DSCP Map Profile: qbdef pbit0: 0,1,2,3,4,5,6,7 pbit1: 8,9,10,11,12,13,14,15 pbit2: 16,17,18,19,20,21,22,23 pbit3: 24,25,26,27,28,29,30,31 pbit4: 32,33,34,35,36,37,38,39 pbit5: 40,41,42,43,44,45,46,47 pbit6: 48,49,50,51,52,53,54,55 pbit7: 56,57,58,49,60,61,62,63 P-Bit Remap Profile: qbdef inbit0: 0 inbit1: 1 inbit2: 2 inbit3: 3 inbit4: 4 inbit5: 5 inbit6: 6 inbit7: 7 QoS Profile: (silver) allstrictprio: disable mappbit0-cos: 0 mappbit1-cos: 0 mappbit2-cos: 1 mappbit3-cos: 1 mappbit4-cos: 2 mappbit5-cos: 2 mappbit6-cos: 3 mappbit7-cos: 3 cos0weight: 33 cos1weight: 33 cos2weight: 34 voip-sig-pbit: 5 voip-bear-pbit: 6 voip-sig-dscp: 46 voip-bear-dscp: 24 igmp-pbit: 4 ratelimit: enable SW Image -------0 1 Version -------------none none Valid ----- Active ------ Accepted -------- Open Door Status: n/a Miscellaneous Inputs: n/a =============================================================================== Command completed successfully Example 3: (ont6000get) AXS2200> show ont chassis au-3-4-16 Page 237 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment =============================================================================== ONT CHASSIS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Registration ID: none Learned Registration ID: 0000000000 ONT Channel on the PON: 16 ONT Address (AID): au-3-4-16 OLT PON Card Type: AGPONC Equipment Code: 1234567890 ONT Type: ONT6000GET Product Code: ONT6000GET MAC Address: 00-11-22-33-44-55 System Uptime (seconds): 873992 High Optical RX Power Alarm Threshold (dBm): -12.4 Low Optical RX Power Alarm Threshold (dBm): -25.0 Battery Backup: provisioned AdminState: enable Oper Status: active Fault Reason: noFaultDetected Voice Service Type: PBX Operating Forwarding Mode: chassis-fwdmode ONT-Profile: qbdef Voice Mode: tdm Enet Power Shedding Delay: 600 MoCA Power Shedding Delay: 600 HCNA Power Shedding Delay: 600 VDSL2 Power Shedding Delay: 600 DS1/E1 Power Shedding Delay: 600 RF Video Power Shedding Delay: 30 Reboot Hold POTS Bias: 60 MAC Aging (seconds): 300 DoS Protection: disable Forwarding Mode: isolated DSCP Map Profile: qbdef pbit0: 0,1,2,3,4,5,6,7 pbit1: 8,9,10,11,12,13,14,15 pbit2: 16,17,18,19,20,21,22,23 pbit3: 24,25,26,27,28,29,30,31 pbit4: 32,33,34,35,36,37,38,39 pbit5: 40,41,42,43,44,45,46,47 pbit6: 48,49,50,51,52,53,54,55 pbit7: 56,57,58,49,60,61,62,63 P-Bit Remap Profile: qbdef inbit0: 0 inbit1: 1 inbit2: 2 inbit3: 3 inbit4: 4 inbit5: 5 inbit6: 6 inbit7: 7 QoS Profile: Gold allstrictprio: enable mappbit0-cos: 0 mappbit1-cos: 0 mappbit2-cos: 1 mappbit3-cos: 1 mappbit4-cos: 2 mappbit5-cos: 2 mappbit6-cos: 3 mappbit7-cos: 3 Page 238 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment cos0weight: 10 cos1weight: 40 cos2weight: 50 voip-sig-pbit: 5 voip-bear-pbit: 6 voip-sig-dscp: 46 voip-bear-dscp: 24 igmp-pbit: 4 ratelimit: enable SW Image -------0 1 Version -------------version-new123 version-old123 Open Door Status: Valid ----yes yes Active -----yes no Accepted -------yes no closed Miscellaneous Inputs: Index AdminState OperState ----- ---------- --------1 enable off 2 enable off 3 enable off 4 disable - Name ---------------hightemp highhumidity No Message No Message =============================================================================== Command completed successfully Error Codes Invalid ONT Page 239 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment show ont eqpt (ontaddress) Description Displays the equipment inventory of the specified ONT. Reported fields include: Name: The user-defined name for the ONT. SN: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). ONT Channel on the PON: 16 ONT Address (AID): The address for the ONT in the format oltslot-port-channel OLT PON Card Type: The type of PON card. ONT BootStrap Version: The version of the ONT BootStrap, or unk (unknown) ONT BootROM Version: The version of the ONT BOOTROM, or unk (unknown), or n/a (not applicable) ONT Profile: The ONT profile being used For each ONT slot, the following is reported: - Slot address: Reports the slot address for the card. If the ONT contains integrated ports directly on the chassis, this field shows "ont" instead of a slot address. - Expected Card Type: The card type that is expected in this slot. - Actual Card Type: The actual card type that is inserted into the slot. The main card in the chassis is reported as "chassis". If the ONT contains integrated ports directly on the ONT chassis, then this shows the type of interface provided. For ONTs that support integrated ports of different types, a row will be shown for each type. A dash (-) indicates that there is no actual card (for example, a preprovisioned ONT) - Ports: The number of ports associated with the card type. If the ONT contains integrated ports, this field shows how many ports are provided of the type indicated in the Expected Card Type field. NOTE: Factory-configurable modules and ports that are not hot swappable return a "-" for these fields to indicate they are not applicable. NOTE: These two items may not be available for non-Motorola ONTs. - Mfg SN: The manufacturing serial number. - Equipment ID: The equipment identifier. For Motorola ONTs, this field shows the Telcordia CLEI code. User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Page 240 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment Command completed successfully Example(s) Example 1: (ONT1000GT) AXS2200> show ont eqpt au-5-1-16 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-5-1-16 OLT PON Card Type: AGPOND ONT BootStrap Version: R7_2_0_BR1 ONT BootROM Version: R7_2_0_BR1 ONT Profile: onttypea Slot ---ont ont ont ont Expected Card ------------chassis gige pots moca/video Actual Card ------------chassis gige pots moca/video Ports ----1 4 1 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM3300ERA - =============================================================================== Command completed successfully Example 2: (ONT6000GET) AXS2200> show ont eqpt au-5-1-16 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-5-1-16 OLT PON Card Type: AGPONC ONT BootStrap Version: R6_2_0_BR1 ONT BootROM Version: R7_0_0_BR1 ONT Profile: qbdef Slot ---ont ont ont ont Expected Card ------------chassis gige pots video Actual Card ------------chassis gige pots video Ports ----12 24 1 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4900ARA - =============================================================================== Command completed successfully Example 3: (ONT6000GVT) AXS2200> show ont eqpt au-5-1-16 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: Page 241 alpha AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA SN: ONT ONT OLT ONT ONT ONT ONT Equipment Slot ---ont ont ont ont MRCC12345678 Channel on the PON: 16 Address (AID): au-5-1-16 PON Card Type: AGPONC BootStrap Version: R7_0_0_BR1 BootROM Version: R7_0_0_BR1 Profile: qbdef Expected Card ------------chassis vdsl2 pots video Actual Card ------------chassis vdsl2 pots video Ports ----12 24 1 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4B10ARA - =============================================================================== Command completed successfully Example 4: (ONT1500GT) AXS2200> show ont eqpt au-5-1-16 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-5-1-16 OLT PON Card Type: AGPONC ONT BootStrap Version: R7_0_0_BR1 ONT BootROM Version: R7_0_0_BR1 ONT Profile: qbdef Slot ---ont ont ont ont Expected Card ------------chassis gige pots moca/video Actual Card ------------chassis gige pots moca/video Ports ----2 8 1 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - =============================================================================== Command completed successfully Example 5: (ONT1400GT) AXS2200> show ont eqpt au-5-1-14 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 14 ONT Address (AID): au-5-1-14 OLT PON Card Type: AGPOND ONT BootStrap Version: R7_0_0_BR1 ONT BootROM Version: R7_0_0_BR1 ONT Profile: qbdef Slot ---ont ont ont Page Expected Card ------------chassis gige pots 242 Actual Card ------------chassis gige pots Ports ----2 2 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ont ONT Equipment video video 1 - - =============================================================================== Command completed successfully Example 6: (ONT1420GT) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPONC ONT BootStrap Version: R7_0_0_BR1 ONT BootROM Version: R7_0_0_BR1 ONT Profile: qbdef Slot ---ont ont ont ont Expected Card ------------chassis gige pots hcna/video Actual Card ------------chassis gige pots hcna/video Ports ----2 2 1 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - =============================================================================== Command completed successfully Example 7: (SF24210) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPONC ONT BootStrap Version: R7_0_0_BR1 ONT BootROM Version: R7_0_0_BR1 ONT Profile: qbdef Slot ---ont ont ont ont ont Expected Card ------------chassis gige 10/100base-t pots video Actual Card ------------chassis gige 10/100base-t pots video Ports ----1 3 2 1 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - =============================================================================== Command completed successfully Example 8: (SF24200) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 Page 243 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPONC ONT BootStrap Version: R7_0_0_BR1 ONT BootROM Version: R7_0_0_BR1 ONT Profile: qbdef Slot ---ont ont ont ont Expected Card ------------chassis gige 10/100base-t pots Actual Card ------------chassis gige 10/100base-t pots Ports ----1 3 2 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - =============================================================================== Command completed successfully Example 9: (SF21000) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPONC ONT BootStrap Version: R7_0_0_BR1 ONT BootROM Version: R7_0_0_BR1 ONT Profile: qbdef Slot Expected Card Actual Card Ports Mfg SN Equipment ID ---- ------------- ------------- ----- ---------------- --------------------ont chassis chassis xxxxxxxxxxxxxxxx BVM4700ARA ont gige gige 1 =============================================================================== Command completed successfully Example 10: (RG24200) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPONC ONT BootStrap Version: R7_2_0_BR1 ONT BootROM Version: R7_2_0_BR1 ONT Profile: qbdef Slot ---ont ont ont ont Page Expected Card ------------chassis gige 10/100base-t pots 244 Actual Card ------------chassis gige 10/100base-t pots Ports ----1 3 2 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment =============================================================================== Command completed successfully Example 11: (MD26000) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPOND ONT BootStrap Version: R7_2_0 ONT BootROM Version: R7_2_0 ONT Profile: qbdef Slot ---ont ont Expected Card ------------chassis 10/100base-t Actual Card ------------chassis 10/100base-t Ports ----24 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - =============================================================================== Command completed successfully Example 12: (WT21004) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPOND ONT BootStrap Version: R7_2_0 ONT BootROM Version: R7_2_0 ONT Profile: qbdef Slot ---ont ont Expected Card ------------chassis gige Actual Card ------------chassis gige Ports ----4 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - =============================================================================== Command completed successfully Example 13: (SB24040) AXS2200> show ont eqpt au-5-1-22 =============================================================================== ONT EQPT REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 22 ONT Address (AID): au-5-1-22 OLT PON Card Type: AGPOND Page 245 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment ONT BootStrap Version: R7_3_0 ONT BootROM Version: R7_3_0 ONT Profile: qbdef Slot ---ont ont ont Expected Card ------------chassis c-ds1/e1 gige Actual Card ------------chassis c-ds1/e1 gige Ports ----4 4 Mfg SN ---------------xxxxxxxxxxxxxxxx - Equipment ID --------------------BVM4700ARA - =============================================================================== Command completed successfully Error Codes Invalid ONT Page 246 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment show ont eqpt-detail (ontaddress) Description Provides detailed equipment reports for the ONT equipment. - ONT Name: user provisioned name for the ONT - ONT FSAN SN: The FSAN vendor ID and serial number - ONT Channel on the PON: {1-64} - ONT Address (AID): au-{1-18}-{1-4}-{1-64} - OLT PON Card Type: The type of PON card at the OLT - FSAN Vendor ID: The 4-character FSAN vendor ID FSAN SN: The 8-digit FSAN serial number FSAN Version: The 14-character version as indicated in the ONT-G Managed entity Mfg SN: The vendor manufacturing serial number (e.g. A04NG10011601011) Part Number: The vendor part number (e.g. 536711-001-00) CLEI Code: Reports the 20-byte Equipment ID as indicated in the ONT2-G Managed entity Product Code String: The product code string followed by the product code value as indicated in the ONT2-G Managed entity (e.g. ont1000gt (262)) - HW Version: hardware version (e.g. 0x1) - BOM Version: The BOM version (e.g. 09) - OMCC Version: as indicated in the ONT2-G Managed entity (e.g. 0x80) - Mode: as indicated in the ONT2-G Managed entity (e.g. GEM only) - BootStrap Version: The revision of the ONT BootStrap, or unk (unknown) - BootROM Version: The BootROM version - Admin State: The provisioned admin state for the ONT {enable, e-stop} - Oper State: The operating state for the ONT: - active (ONT is active) - ranging (ONT is being ranged) - fault (ONT has suffered an equipment failure) - ooc (out-of-contact: ONT ranging process retries have timed out, or other failures are preventing the OLT from contacting the ONT). - e-stop (emergency-stop: ONT has been set to the Emergency Stop state) - dwnld (download: software is being downloaded to the ONT) -- see *Note - battoper (battery-operation: ONT is operating on battery backup) -- see *Note Note: There is an additional ONT state that is supported, but would not be applicable for this command (unassigned: ONT has no channel ID assigned) User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Command completed successfully Example(s) Page 247 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment Example 1: ONT1000GT AXS2200> show ont eqpt-detail au-5-1-16 =============================================================================== ONT EQPT-DETAIL REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== ONT ONT ONT ONT OLT Name: alpha FSAN SN: MRCC12345678 Channel on the PON: 16 Address (AID): au-5-1-16 PON Card Type: AGPONC FSAN Vendor ID: MRCC FSAN SN: 12345678 FSAN Version: 12345678901234 Mfg SN: A04NG10011601011 Part Number: 536711-001-00 CLEI Code: BVM3300ERA Product Code String: ont1000gt (262) HW Version: 0x1 BOM Version: 09 OMCC Version: 0x80 Mode: GEM only BootStrap Version: R6_2_0_BR1 BootROM Version: R6_0_0_BR1 Admin State: enable Oper State: active =============================================================================== Command completed successfully Example 2: ONT6000GET AXS2200> show ont eqpt-detail au-5-1-16 =============================================================================== ONT EQPT-DETAIL REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== ONT ONT ONT ONT OLT Name: alpha FSAN SN: MRCC12345678 Channel on the PON: 16 Address (AID): au-5-1-16 PON Card Type: AGPONC FSAN Vendor ID: MRCC FSAN SN: 12345678 FSAN Version: 12345678901234 Mfg SN: A04NG10011601011 Part Number: 534014-001-00 CLEI Code: BVM4900ARA Product Code String: ont6000get (264) HW Version: 0x1 BOM Version: 03 OMCC Version: 0x80 Mode: GEM only BootStrap Version: R6_0_0_BR1 BootROM Version: R6_0_0_BR1 Admin State: enable Oper State: active =============================================================================== Command completed successfully Error Codes Invalid ONT Invalid ONT equipment state for request Page 248 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 249 ONT Equipment AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Equipment show pon-power (slot-port) Description Displays power level information for a PON. The report contains the following information: OLT PON Card Type: Displays the type of PON card. PON Port Admin State: Displays whether the port is set to enable or disable. Total Number of ONTs on the PON: Shows how many ONTs are on the PON. Power Level Range: Lower and Upper Power level values to determine target range. For each ONT found on the PON, the following is reported: - AID (Address): Displays the ONT Address - SN: Displays the serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - Name: Displays the user-defined name of the ONT or "-" if the ONT is unassigned, or if the ONT is pre-provisioned and no name has been specifically configured yet. - RxPwr: Approximate received power from the ONT in dBm (on the 1310 nm wavelength). unk (Unknown) would be shown in case the value is too low and can't be retrieved. - Step: Current ONT power level mode [0,1,2] (0=highest, 2=lowest) - ExcFlag: Outside of correctable range (Yes, No, n/a) n/a is used for OLT Optics where no active Power leveling is performed (e.g. Fujitsu) - CorrNo: Number of power level adjustments performed since PON card reboot. User Privilege Level: Operator Required Parameters: slot-port Selects the desired port. Default Values Confirmation Message Example(s) Example 1: Fiberxon OLT GPON Optics AXS2200> show pon-power au-5-1 =============================================================================== PON POWER REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== OLT PON Card Type: AGPONC PON Port Admin State: enable Total Number of ONTs on PON: 6 Power Level Range: -26.0 dBm to -12.0 dBm AID --------au-5-1-1 au-5-1-2 Page 250 SN -----------MRCC33A490BC MRCC1D44911D Name -------------------MRCC33A490BC MRCC1D44911D RxPwr Step ExcFlag CorrNo ----- ---- ------- ------20.5 2 n 2 -24.6 1 n 1 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA au-5-1-3 au-5-1-4 - ONT Equipment QMBG144567DC MRCC12345ABC MRCC12340987 MRCCABCD9871 olympicpark MRCC12345ABC - -11.5 -26.8 - 1 2 - n y - 1 2 - =============================================================================== Command completed successfully Example 2: Fujitsu OLT GPON Optics AXS2200> show pon-power au-5-1 =============================================================================== PON POWER REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== OLT PON Card Type: AGPOND PON Port Admin State: enable Total Number of ONTs on PON: 6 Power Level Range: -26.0 dBm to -12.0 dBm AID --------au-5-1-1 au-5-1-2 au-5-1-3 au-5-1-4 - SN -----------MRCC33A490BC MRCC1D44911D QMBG144567DC MRCC12345ABC MRCC12340987 MRCCABCD9871 Name -------------------MRCC33A490BC MRCC1D44911D olympicpark MRCC12345ABC - RxPwr Step ExcFlag CorrNo ----- ---- ------- ------20.5 0 n/a 2 unk 0 n/a 1 -11.5 0 n/a 1 -26.8 0 n/a 2 - =============================================================================== Command completed successfully Error Codes PON port is secondary - use primary PON port address Invalid card Invalid port Page 251 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 252 ONT Equipment AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning ONT Provisioning set ont id (ontaddress) ont-qosconfig (ontqosconfigname) Description Defines the QoS profile for the ONT. If none is specified, then the default profile is used User Privilege Level: Superuser Required Parameters: ontaddress id Identifies the ONT by address (e.g. au-3-4-16). ont-qosconfig ontqosconfigname Selects the ONT QoS Configuration Profile Default Values Confirmation Message WARNING: This changes the ONT QoS Configuration Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> set ont id au-5-1-3 ont-qosconfig alpha WARNING: This changes the ONT QoS Configuration Do you want to continue? y|n >y Command completed successfully. Error Codes Name not found ONT does not exist Invalid ONT Page 253 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning set profile ont-profile forwarding-mode (fwdmode) Description This command allows the user to configure an ONT profile for the mode of voice transmission, and the provisionable power shedding behavior for Ethernet, MoCA, VDSL2, DS1/E1 and RF Video interfaces and the Bias Voltage Hold on all POTS lines after a reboot. Also supports ONT forwarding mode. Note: MAC Address Aging is only available for ENET and HCNA ports. Denail of Service (DoS) Protection is offered for specific ONTs. The protection is All protection for vairous attacks are turned on or off. If some of the attributes are not specified, the default values will be used. At least one attribute is required. When the ont-profile gets applied to an ONT, only the parameters that are supported are applied and any unsupported ones are ignored. User Privilege Level: Superuser Optional Parameters: forwarding-mode fwdmode Specifies the type of VLAN forwarding mode. Valid choices are: - chassis-fwdmode - isolated (TR-101 access) - switched Default Values voice = tdm-h248 enetdelay= 600 seconds (10 minutes) mocadelay = 600 seconds (10 minutes) vdsl2delay = 600 seconds (10 minutes) hcnadelay = 600 seconds (10 minutes) rfvideodelay=30 seconds rbholdpotsbias=0 seconds macage = 300 seconds dosprotect = disable forwarding-mode = chassis-fwdmode Confirmation Message Command completed successfully Example(s) Example 1: (all settings) AXS2200> set profile ont-profile name alpha voice voip enetdelay 3000 mocadelay 300 vdsl2delay 660 rfvideodelay 0 hcnadelay 0 ds1e1delay 0 rbholdpotsbias 120 macage 550 dosprotect enable forwarding-mode switched Command completed successfully Example 2: (enetdelay setting only) AXS2200> set profile ont-profile name classic enetdelay 300 Command completed successfully Example 3: Page 254 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning (Mac Address Aging only) AXS2200> set profile ont-profile name classic macage 500 dosprotect enable Command completed successfully Example 4: (forwarding mode only) AXS2200> set profile ont-profile name alpha forwarding-mode switched Command completed successfully Error Codes Invalid rbholdpotsbias value Invalid name Invalid enet delay Invalid MoCA delay Invalid RF video delay Delay setting must be a multiple of 15 seconds Maximum number of allowed profiles exceeded Invalid VDSL2 delay Invalid MAC Age Range Name already in use Page 255 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning set profile ont-profile default-name (name) Description Sets the name of the profile to use as the default for all new ONT settings. If the assigned default profile settings cannot be supported by the ONT hardware, then the profile qbdef will be applied. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values default-name = qbdef Confirmation Message This will affect new ONT settings Do you want to continue? y|n >y Command completed successfully. Example(s) Example: AXS2200> set profile ont-profile default-name onttype1 This will affect new ONT settings Do you want to continue? y|n >y Command completed successfully. Error Codes Profile name not found in Profile Table Page 256 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning set profile ont-profile name (name) voice (voicemode) enetdelay (value) mocadelay (value) vdsl2delay (value) hcnadelay (value) rfvideodelay (value) rbholdpotsbias (value) macage (seconds) dosprotect ({enable | disable}) Description This command allows the user to configure an ONT profile for the mode of voice transmission, and the provisionable power shedding behavior for Ethernet, MoCA, VDSL2, DS1/E1 and RF Video interfaces and the Bias Voltage Hold on all POTS lines after a reboot. Note: MAC Address Aging is only available for ENET and HCNA ports. Denail of Service (DoS) Protection is offered for specific ONTs. The protection is All protection for vairous attacks are turned on or off. If some of the attributes are not specified, the default values will be used. At least one attribute is required. When the ont-profile gets applied to an ONT, only the parameters that are supported are applied and any unsupported ones are ignored. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: vdsl2delay value Specifies the VDSL2 Power shedding delay. This delay sets the amount of time that the VDSL2 interface will remain active following a failure of the AC power to the ONT, and while it is operating on battery backup. Valid values are: 0,1,15-64800 seconds where 0=power shedding feature is disabled (i.e. the ONT continues to power the port until the entire ONT shuts down) where 1= power down the port immediately upon entering battery backup mode and 15-64800 indicates the actual number of seconds before powering down the port while on battery backup. With the exception of 0 and 1, the value must be a multiple of 15 seconds. Note that 64800 seconds equates to 18 hours. rfvideodelay value Specifies the RF Video Port Power shedding delay. This delay sets the amount of time that the RF Video port will remain active following a failure of the AC power to the ONT, and while it is operating on battery backup. Page 257 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning Valid values are: 0,1,15-64800 seconds where 0=power shedding feature is disabled (i.e. the ONT continues to power the port until the entire ONT shuts down) where 1= power down the port immediately upon entering battery backup mode and 15-64800 indicates the actual number of seconds before powering down the port while on battery backup. With the exception of 0 and 1, the value must be a multiple of 15 seconds. Note that 64800 seconds equates to 18 hours. enetdelay value Specifies the Ethernet Power shedding delay. This delay sets the amount of time that the Ethernet port will remain active following a failure of the AC power to the ONT, and while it is operating on battery backup. Valid values are: 0,1,15-64800 seconds where 0=power shedding feature is disabled (i.e. the ONT continues to power the port until the entire ONT shuts down) where 1= power down the port immediately upon entering battery backup mode and 15-64800 indicates the actual number of seconds before powering down the port while on battery backup. With the exception of 0 and 1, the value must be a multiple of 15 seconds. Note that 64800 seconds equates to 18 hours. mocadelay value Specifies the MoCA port Power shedding delay. This delay sets the amount of time that the MoCA port will remain active following a failure of the AC power to the ONT, and while it is operating on battery backup. Valid values are: 0,1,15-64800 seconds where 0=power shedding feature is disabled (i.e. the ONT continues to power the port until the entire ONT shuts down) where 1= power down the port immediately upon entering battery backup mode and 15-64800 indicates the actual number of seconds before powering down the port while on battery backup. With the exception of 0 and 1, the value must be a multiple of 15 seconds. Note that 64800 seconds equates to 18 hours. voice voicemode Indicates the voice mode for the ONT: - voip (voice over IP) - tdm (traditional analog voice) - eh248 (remote H.248) Page 258 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA macage ONT Provisioning seconds Possible values: 0 - 65535 seconds No aging= 0 seconds hcnadelay value Specifies the HCNA port Power shedding delay. This delay sets the amount of time that the HCNA port will remain active following a failure of the AC power to the ONT, and while it is operating on battery backup. Valid values are: 0,1,15-64800 seconds where 0=power shedding feature is disabled (i.e. the ONT continues to power the port until the entire ONT shuts down) where 1= power down the port immediately upon entering battery backup mode and 15-64800 indicates the actual number of seconds before powering down the port while on battery backup. With the exception of 0 and 1, the value must be a multiple of 15 seconds. Note that 64800 seconds equates to 18 hours. dosprotect {enable | disable} Allows the user to enable or disable denial of service (DoS) protection on the ONT rbholdpotsbias value rbholdpotsbias is the time period in seconds for which the Bias Voltage will be upheld after an ONT reboot. Note that this configurable value is added to the fixed 60 second voltage hold for each ONT. Valid values are 0-65535 seconds. For example, if the rbholdpotsbias is set to 10 seconds, the actual time for which the POTS bias is held after the ONT reboot is 70 seconds (fixed 60 seconds plus the configurable value which is set to 10 seconds) Due to the fact that actual reboot behavior and reboot times vary between ONT types, the total time after a reboot where the POTS Voltage is kept up is "at least" the fixed 1 minute timer PLUS the configured Reboot POTS bias timer from the ONT profile. It is acceptable for the system to exceed the time. Default Value = 0 seconds Default Values Page 259 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning voice = tdm-h248 enetdelay= 600 seconds (10 minutes) mocadelay = 600 seconds (10 minutes) vdsl2delay = 600 seconds (10 minutes) hcnadelay = 600 seconds (10 minutes) rfvideodelay=30 seconds rbholdpotsbias=0 seconds macage = 300 seconds dosprotect = disable Confirmation Message Command completed successfully Example(s) Example 1: (all settings) AXS2200> set profile ont-profile name alpha voice voip enetdelay 3000 mocadelay 300 vdsl2delay 660 rfvideodelay 0 hcnadelay 0 ds1e1delay 0 rbholdpotsbias 120 macage 550 dosprotect enable Command completed successfully Example 2: (enetdelay setting only) AXS2200> set profile ont-profile name classic enetdelay 300 Command completed successfully Example 3: (Mac Address Aging only) AXS2200> set profile ont-profile name classic macage 500 dosprotect enable Command completed successfully Error Codes Invalid rbholdpotsbias value Invalid name Invalid enet delay Invalid MoCA delay Invalid RF video delay Delay setting must be a multiple of 15 seconds Maximum number of allowed profiles exceeded Invalid VDSL2 delay Invalid MAC Age Range Name already in use Invalid ds1e1 delay Page 260 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning set profile ont-qosconfig all-strict-priority ({enable | disable}) cos0weight ({0-100}) cos1weight ({0-100}) cos2weight ({0-100}) ratelimit ({enable | disable}) Description This profile defines the mapping between the p-bits of the outer tag and the classes of service. The higher the Pbit value the higher the priority of the incoming packet. It also sets the weights of the WRR queues and allows to configure pbit and DSCP values for VoIP bearer, VoIP signaling traffic plus pbit settings for IGMP messages. There is 1 Strict Priority Queue (cos3) and 3 WRR queues (cos0-2) or the queues can be configured to all strict priority. The Strict Priority Queue has the highest priority. If all-strict-priority is enabled, then the weights are not applicable. The defaults are equal weight. Cos weight <=100, all weights must add up to 100, or the command will be denied. ratelimit indicates whether rateliming is enabled or disabled on the whole ONT in the downstream direction User Privilege Level: Superuser Optional Parameters: ratelimit {enable | disable} Enables or disables ratelimiting in the downstream direction all-strict-priority {enable | disable} If enable then all the queues are strict priority. If disable then there is 1 Strict Priority and 3 WRR cos0weight {0-100} Weight of the WRR 0 queue. This is measured in % of the time that this queue shall be serviced. cos1weight {0-100} Weight of the WRR 1 queue. This is measured in % of the time that this queue shall be serviced. cos2weight {0-100} Weight of the WRR 2 queue. This is measured in % of the time that this queue shall be serviced. Default Values Page 261 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning mappbit0cos 0 mappbit1cos 0 mappbit2cos 1 mappbit3cos 1 mappbit4cos 2 mappbit5cos 3 mappbit6cos 3 mappbit7cos 3 all-strict-priority enable cos0weight 33 cos1weight 33 cos2weight 34 ratelimit disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile ont-qosconfig name gold mappbit0cos 0 mappbit1cos 0 mappbit2cos 1 mappbit3cos 1 mappbit4cos 2 mappbit5cos 2 mappbit6cos 3 mappbit7cos 3 all-strict-priority disable cos0weight 10 cos1weight 20 cos2weight 70 ratelimit enable Command completed successfully Error Codes Invalid VoIP bearer dscp value Invalid VoIP bearer pbit Invalid VoIP signaling dscp value Invalid VoIP signaling pbit Invalid name Maptocos is out of range Name already in use QoS - CoS weight must be <= 100 QoS - Sum of CoS weight must be 100 Invalid IGMP pbit Page 262 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning set profile ont-qosconfig voip-sig-pbit (value) voip-bear-pbit (value) voip-sig-dscp (value) voip-bear-dscp (value) igmp-pbit (value) Description This profile defines the mapping between the p-bits of the outer tag and the classes of service. The higher the Pbit value the higher the priority of the incoming packet. It also sets the weights of the WRR queues and allows to configure pbit and DSCP values for VoIP bearer, VoIP signaling traffic plus pbit settings for IGMP messages. There is 1 Strict Priority Queue (cos3) and 3 WRR queues (cos0-2) or the queues can be configured to all strict priority. The Strict Priority Queue has the highest priority. If all-strict-priority is enabled, then the weights are not applicable. The defaults are equal weight. Cos weight <=100, all weights must add up to 100, or the command will be denied. ratelimit indicates whether rateliming is enabled or disabled on the whole ONT in the downstream direction User Privilege Level: Superuser Optional Parameters: value voip-sig-pbit pbit value (0 - 7) to use for VoIP signaling traffic originating at the ONT. value voip-bear-pbit pbit value (0 - 7) to use for VoIP bearer traffic originating at the ONT. voip-sig-dscp value DSCP value (0 - 63) to insert in VoIP signaling traffic originating at the ONT. voip-bear-dscp value DSCP value (0 - 63) to insert in VoIP bearer traffic originating at the ONT. igmp-pbit value pbit value (0 - 7) to insert into IGMP messages passing upstream through the ONT. Default Values Page 263 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning mappbit0cos 0 mappbit1cos 0 mappbit2cos 1 mappbit3cos 1 mappbit4cos 2 mappbit5cos 3 mappbit6cos 3 mappbit7cos 3 all-strict-priority enable cos0weight 33 cos1weight 33 cos2weight 34 voip-sig-pbit=5 voip-bear-pbit=6 voip-sig-dscp=24 voip-bear-dscp=46 igmp-pbit=4 ratelimit disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile ont-qosconfig name gold mappbit0cos 0 mappbit1cos 0 mappbit2cos 1 mappbit3cos 1 mappbit4cos 2 mappbit5cos 2 mappbit6cos 3 mappbit7cos 3 all-strict-priority disable cos0weight 10 cos1weight 20 cos2weight 70 ratelimit enable voip-sig-pbit 4 voip-bear-pbit 4 voip-sig-dscp 46 voip-bear-dscp 24 igmp-pbit 4 Command completed successfully Error Codes Invalid VoIP bearer dscp value Invalid VoIP bearer pbit Invalid VoIP signaling dscp value Invalid VoIP signaling pbit Invalid name Maptocos is out of range Name already in use QoS - CoS weight must be <= 100 QoS - Sum of CoS weight must be 100 Invalid IGMP pbit Page 264 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning set profile ont-qosconfig name (ontqosconfigname) mappbit0cos ({0-3}) mappbit1cos ({0-3}) mappbit2cos ({0-3}) mappbit3cos ({0-3}) mappbit4cos ({0-3}) mappbit5cos ({0-3}) mappbit6cos ({0-3}) mappbit7cos ({0-3}) Description This profile defines the mapping between the p-bits of the outer tag and the classes of service. The higher the Pbit value the higher the priority of the incoming packet. It also sets the weights of the WRR queues and allows to configure pbit and DSCP values for VoIP bearer, VoIP signaling traffic plus pbit settings for IGMP messages. There is 1 Strict Priority Queue (cos3) and 3 WRR queues (cos0-2) or the queues can be configured to all strict priority. The Strict Priority Queue has the highest priority. If all-strict-priority is enabled, then the weights are not applicable. The defaults are equal weight. Cos weight <=100, all weights must add up to 100, or the command will be denied. ratelimit indicates whether rateliming is enabled or disabled on the whole ONT in the downstream direction User Privilege Level: Superuser Required Parameters: name ontqosconfigname Defines the QoS profile for the ONT Optional Parameters: mappbit0cos {0-3} This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). mappbit1cos {0-3} This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). mappbit2cos {0-3} This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). mappbit3cos {0-3} This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). mappbit4cos {0-3} This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). mappbit5cos Page 265 {0-3} AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). mappbit6cos {0-3} This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). mappbit7cos {0-3} This defines a mapping between the P-bit value of the outer tag and a Class of Service (CoS). Default Values mappbit0cos 0 mappbit1cos 0 mappbit2cos 1 mappbit3cos 1 mappbit4cos 2 mappbit5cos 3 mappbit6cos 3 mappbit7cos 3 all-strict-priority enable cos0weight 33 cos1weight 33 cos2weight 34 ratelimit disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile ont-qosconfig name gold mappbit0cos 0 mappbit1cos 0 mappbit2cos 1 mappbit3cos 1 mappbit4cos 2 mappbit5cos 2 mappbit6cos 3 mappbit7cos 3 all-strict-priority disable cos0weight 10 cos1weight 20 cos2weight 70 ratelimit enable Command completed successfully Error Codes Invalid VoIP bearer dscp value Invalid VoIP bearer pbit Invalid VoIP signaling dscp value Invalid VoIP signaling pbit Invalid name Maptocos is out of range Name already in use QoS - CoS weight must be <= 100 QoS - Sum of CoS weight must be 100 Invalid IGMP pbit Page 266 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning show holdpotsbias ({all | ontaddress | slot}) Description Will display the current state of the manual forced bias voltage timer as set by set holdpotsbias. Input can be the word "all", which will list all the objects with active manual bias voltage holds, which can be cards and/or individual ONTs. If an ontaddress or slot information is provided at the command line, the system will restrict the output to that object. In case a bias voltage was set at the card level and individual ONTs have been set separately afterwards to different durations (including 0), these ONTs shall also be reported under the card level row. User Privilege Level: Operator Required Parameters: {all | ontaddress | slot} Indicates all ONTs, a specific ONT address or the OLT slot address. The ONT address is slot-port-channel: - slot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) The OLT slot address is slot: - slot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show holdpotsbias au-13 =============================================================================== Current Forced Hold POTS Bias Report DATE: 07/28/2004 TIME: 20:15:40 =============================================================================== Duration AID Level Set (min) Expiration ------------------- ------------------- -------- ------------------au-13 card 07/28/2006-02:45:00 120 07/28/2006-04:45:00 =============================================================================== Command completed successfully Example 2: AXS2200> show holdpotsbias all =============================================================================== Current Forced Hold POTS Bias Report DATE: 07/28/2004 TIME: 20:15:40 =============================================================================== Duration AID Level Set (min) Expiration Page 267 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ----------au-13 au-13-1-1 au-13-1-4 au-13-1-7 au-14-1-2 ONT Provisioning --------card ont ont ont ont ------------------07/28/2006-02:45:00 07/28/2006-02:55:10 07/28/2006-02:55:15 07/28/2006-03:10:05 07/28/2006-02:30:00 -------120 0 0 1440 60 ------------------07/28/2006-04:45:00 07/28/2006-02:55:10 07/28/2006-02:55:15 07/29/2006-03:10:05 07/28/2006-03:30:00 =============================================================================== Command completed successfully Error Codes Invalid equipment state for request ONT does not exist ONT with the preprovisioned AID does not exist Invalid slot Page 268 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning show profile ont-profile name (name) Description Displays the contents of the profile table for ONT profiles. If no name is provided, all entries will be shown, one after the other. The following information is shown: Name: The name of the entry in the ONT-Profile profile table Voice: voip, tdm, eh248 Enet Pwr Shed Delay (seconds): 0,1,15-64800 Moca Pwr Shed Delay (seconds): 0,1,15-64800 VDSL2 Pwr Shed Delay (seconds): 0,1,15-64800 DS1/E1 Pwr Shed Delay (seconds): 0,1,15-64800 RFVideo Pwr Shed delay (seconds): 0,1,15-64800 Reboot Hold POTS Bias (seconds): 0-65535 DoS Protection: enable, disable Forwarding Mode: chassis-fwdmode, switched, isolated The default profile is indicated at the top of the report, and by an asterisk after the name. User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values If no name provided, all names in the profile will be shown Confirmation Message Command completed successfully Example(s) Example 1: (all entries) AXS2200> show profile ont-profile =============================================================================== ONT-PROFILE PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default: qbdef Name: qbdef Voice: tdm Enet PwrShedDelay (sec): 600 MoCA PwrShedDelay (sec): 600 VDSL2 PwrShedDelay (sec): 600 DS1E1 PwrShedDelay (sec): 600 RFVideo PwrShedDelay (sec): 30 Reboot Hold POTS Bias (sec): 0 DoS Protection: disable Forwarding Mode: chassis-fwdmode -----------------------------------------------------------Name: alpha Page 269 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning Voice: voip Enet PwrShedDelay (sec): 2000 MoCA PwrShedDelay (sec): 100 VDSL2 PwrShedDelay (sec): 660 DS1E1 PwrShedDelay (sec): 600 RFVideo PwrShedDelay (sec): 0 Reboot Hold POTS Bias (sec): 120 DoS Protection: enable Forwarding Mode: chassis-fwdmode =============================================================================== Command completed successfully Example 2: (individual entry) AXS2200> show profile ont-profile name qbdef =============================================================================== ONT-PROFILE PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default: qbdef Name: qbdef Voice: tdm Enet PwrShedDelay (sec): 600 MoCA PwrShedDelay (sec): 600 VDSL2 PwrShedDelay (sec): 600 DS1E1 PwrShedDelay (sec): 600 RFVideo PwrShedDelay (sec): 30 Reboot Hold POTS Bias (sec): 0 DoS Protection: disable Forwarding Mode: chassis-fwdmode =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 270 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning show profile ont-sipconfig name (pname) Description This command is valid only for a VoIP ONT configured by a SIP configuration server. It displays the bootstrap data in the specified SIP configuration profile as well as VoIP related Alarm and TCA thresholds. The default profile is indicated at the top of the report, and by an asterisk after the name. The following information is shown: Name: The name of the entry in the ont-sipconfig profile table Config Proxy: Null or FQDN Local Domain: Null or Domain Name Abandoned Call TCA Threshold: 0-65535 RTCP Packet fail Alarm Threshold (minutes): 0-65535 RTP Packet Loss Fraction TCA Threshold in % plus 8 bit notation in parentheses: 0-100 (0-255) RTP Jitter TCA Threshold (Timestamp units): 0-4294967295 SIP Message Timeout TCA Threshold: 0-65535 User Privilege Level: Operator Required Parameters: name pname The user-defined profile name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show profile ont-sipconfig name domain345 =============================================================================== ONT-SIPCONFIG PROFILE REPORT DATE: 6/01/2007 TIME: 16:08:22 =============================================================================== Default: qbdef* Name: domain345 Config Proxy: proxy1.lata123.motorola.com Local Domain: region1.motorola.com Abandoned Call TCA Threshold: RTCP Packet fail Alarm Threshold: RTP Packet Loss Fraction TCA Threshold: RTP Jitter TCA Threshold: SIP Message Timeout TCA Threshold: 3 4 20 (51) 0 0 =============================================================================== Command completed successfully Page 271 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning Error Codes Profile name not found in Profile Table Page 272 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 273 ONT Provisioning AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis ONT Provisioning - Chassis set ont id (ontaddress) dscpmap (dscpmapname) Description Sets a DSCP mapping for the ONT. The mapping is enabled or disabled per port. User Privilege Level: Superuser Required Parameters: ontaddress id Identifies the ONT by address (e.g. au-3-4-16). dscpmap dscpmapname Specifies the name of the DSCP map profile. The name is defined by the user and supports a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message This will affect the ability of the ONT to set priority bits. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id au-3-4-16 dscpmap PHB This will affect the ability of the ONT to set priority bits. Do you want to continue? y | n >y Command completed successfully Error Codes ONT does not exist Invalid name Name not found Invalid ONT Page 274 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) misc-input (index) state ({enable | disable}) name (name) Description Set the state and name for ONT miscellaneous inputs. User Privilege Level: Superuser Required Parameters: misc-input index Identifies the miscellaneous discrete input by its index {1-n}. ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Optional Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Initial value: "No Message" for all miscnames Initial value: Monitoring state=enable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set ont id au-5-1-1 misc-input 1 state enable name hightemp Command completed successfully Error Codes Invalid AID ONT does not exist ONT does not support this functionality Invalid name Page 275 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) name (name) Description Allows the user to change the name of an existing ONT. For the VoIP ONT, the ONT name may be set to a hardware independent name, such as a CLLI (Common Language Location Identifier) code. This ensures that the service configuration parameters stay with the wireline subscriber (intended location) when the ONT is replaced by a new ONT, or the ONT is swapped with another ONT in a different location. A note of caution: The VoIP ONT uses the ONT name as the client identifier in requesting the IP address from the DHCP server. The client identifier has to be unique at least within the IP subnet. 1. If the ONT name is changed for the VoIP ONT, it should be done prior to assigning the sip-config profile to the ONT (as part of the VoIP bootstrap configuration). 2. If the ONT name is changed after the ONT has been operating as a VoIP ONT, the VoIP ONT will automatically reset for the modified ONT name to take effect, and a new IP address will be requested from the DHCP server using the new ONT name. This change is not recommended as voice, data and video service may likely be disrupted. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: ontaddress id Identifies the ONT by address (e.g. au-3-4-16). name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values The default for the ONT name, if not previously assigned, is set to the numeric part of the FSAN serial number and the vendor id of the ONT. Confirmation Message The ONT will automatically reset if it has been operating as a VoIP ONT using the old ONT name. Do you wish to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id mocc12349876 name alpha Page 276 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis The ONT will automatically reset if it has been operating as a VoIP ONT using the old ONT name. Do you wish to continue? y | n >y Command completed successfully Error Codes ONT does not exist ONT is in wrong state for this request Invalid ONT Name already in use Page 277 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) optical ont-no-override Description Specifies that the ONT-based hiopticalinpwralarm and lowopticalinpwralarm values (if configured before) shall be discarded. Instead, this ONT shall use the current PON-port based hiopticalinpwralarm and lowopticalinpwralarm instead. User Privilege Level: Superuser Required Parameters: optical Specify property (such as hiopticalinpwralarm and lowopticalinpwralarm) of ONT PON port ont-no-override Specifies that the ONT-port based hiopticalinpwralarm and lowopticalinpwralarm (if configured previously) shall be discarded. The ONT shall use the current PON-port based hiopticalinpwralarm and lowopticalinpwralarm parameters instead. ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set ont id au-5-1-1 ont-no-opt-override Command completed successfully Error Codes Invalid AID ONT is in wrong state for this request ONT does not exist Page 278 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) optical ont-override hiopticalinpwralarm (value) lowopticalinpwralarm (value) Description Set the ONT-based hiopticalinpwralarm and lowopticalinpwralarm, beyond which an alarm will be raised. These values shall override the PON-port based threshold parameters. Setting the Low value to -127.0 dBm will disable reporting of the Low Power alarm and in the same manner, setting the High Power value to 0.0 dBm will disable the High Power alarm reporting. User Privilege Level: Superuser Required Parameters: optical Specify property (such as hiopticalinpwralarm and lowopticalinpwralarm) of ONT PON port ont-override Specifies that PON-port based hiopticalinpwralarm and lowopticalinpwralarm shall be overridden by the two values configured in this CLI command. hiopticalinpwralarm value The Received Optical Power Limit (High) above which an alarm will be generated Allowed Range: -127.0 dBm to 0.0 dBm, in 0.5 dB steps lowopticalinpwralarm value The Received Optical Power Threshold (Low) below which an alarm will be generated. Allowed Range: -127.0 dBm to 0.0 dBm, in 0.5 dB steps ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Default Values lowopticalinpwralarm=-127.0 hiopticalinpwralarm=0.0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set ont id au-5-1-1 ont-override hiopticalinpwralarm -8.4 lowopticalinpwralarm -19.2 Command completed successfully Page 279 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis Error Codes ONT does not exist Invalid AID ONT is in wrong state for this request Invalid high power alarm threshold setting Invalid low power alarm threshold setting Minimum Power threshold cannot be higher than Maximum Power threshold Page 280 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) pbitremap (pbitremapname) Description This sets the P-bit input to P-bit output mapping function. It is enabled or disabled per port. The ONT will ignore any settings that it cannot support. User Privilege Level: Superuser Required Parameters: ontaddress id Identifies the ONT by address (e.g. au-3-4-16). pbitremap pbitremapname The name of the P-Bit remap profile. The name is defined by the user and supports a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message This will affect the ability of the ONT to set priority bits. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id au-3-4-16 pbitremap PHB This will affect the ability of the ONT to set priority bits. Do you want to continue? y | n >y Command completed successfully Error Codes ONT does not exist Invalid name Name not found Invalid ONT Page 281 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) profile (ontprofilename) Description This command allows the ONT profile to be configured. If it is not explicitly configured, then the default profile will be used. This configures the ONT voice mode (VoIP or TDM via the Voice Gateway). If the ONT has been operating in one voice mode and the assigned ontprofile specifies a change in the voice mode (tdm <-> VoIP), the ONT will automatically reset. Different firmware loaded for the new mode is effective only after an ONT reset. The power shedding attributes will be ignored for ONTs that do not support the capability. The command will be denied if the forwarding mode in the profile conflicts with existing vlans configured on the ONT User Privilege Level: Superuser Required Parameters: profile ontprofilename The name of the ONT profile ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Default Values None Confirmation Message The ONT will automatically reset if there is a change in the voice mode operation. Do you wish to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id au-5-1-3 profile alpha The ONT will automatically reset if there is a change in the voice mode operation. Do you wish to continue? y | n >y Command completed successfully Page 282 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis Error Codes ONT forwarding mode conflicts with VLAN forwarding mode Name not found ONT does not exist Invalid ONT Page 283 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) registration-id (regid) Description This command is used to modify the registration ID for an ONT. It is only available when the OLT has ont-channelassignment set to registration. It is only available when the ONT is preprovisioned, or when the ONT has a channel assigned and is either out of contact or in the e-stop state. User Privilege Level: Superuser Required Parameters: registration-id regid Indicates the value for the Registration ID. It is a string of alphanumeric characters, up to a maximum length of 10 numbers. Special characters are not allowed. For example: 1234567890 ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Default Values n/a Confirmation Message This will change the Registration ID for the ONT. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont au-5-1-16 registration-id 1234598760 This will change the Registration ID for the ONT. Do you want to continue? y | n > y Command completed successfully Error Codes Invalid ONT Invalid Registration ID Invalid serial number ONT Registration is not configured Registration ID already in use by a provisioned ONT (duplicate) Registration ID already in use by an unassigned ONT ONT is in wrong state for this request Page 284 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) state (ontstate) Description Sets the ONT state. To remove an ONT permanently from the PON, physically remove the equipment, then issue the "del ont" CLI command. This command is not allowed during a software download. The ONT must have a channel assigned for this command to succeed. User Privilege Level: Superuser Required Parameters: ontaddress id Identifies the ONT by address (e.g. au-3-4-16). state ontstate Sets the ONT state. Valid choices are: - e-stop (sets the ONT to Emergency Stop state. Will not respond to subsequent range attempts) - enable (used to remove an ONT from the emergency stop state by allowing it to respond to range attempts). Default Values none Confirmation Message This will affect the ability of the ONT to respond to range requests. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id au-3-4-16 state e-stop This will affect the ability of the ONT to respond to range requests. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid AID ONT is in wrong state for this request Invalid for pre-provisioned ONTs without serial numbers ONT does not exist Page 285 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontaddress) voiceusertype (service) Description This command is used to set the voice service user type for an ONT. The user can select between Unspecified, Residential, PBX or Payphone. The dafault setting is unspecified. This command is only applicable for ONTs with POTS ports. User Privilege Level: Superuser Required Parameters: voiceusertype service Type of User of this ONT. The user can configure from a set of { Residential User, PBX, payphone , unspecified } ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Default Values voiceusertype=unspecified Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set ont au-5-1-16 voiceusertype PBX Command completed successfully Error Codes Invalid ONT Invalid voiceusertype ONT does not exist ONT is in wrong state for this request Page 286 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis set ont id (ontserial) channel ({1-64}) Description Allows the user to manually assign the channel that the ONT uses on the PON. This command is used only when the chassis ONT channel assignment is set to manual or registration. Channel numbers must be unique on a PON. This comment does not permit the ONT channel number to be set to a channel already in use on the PON. The command is not allowed for ONTs that are pending ONT Serial Number authentication. User Privilege Level: Superuser Required Parameters: ontserial id This is the FSAN serial number that the ONT will use for ranging. It consists of 4 alphabetic characters followed by 8 hexidecimal numbers. For example, MRCC12345678 channel {1-64} Identifies the channel that the ONT uses on the PON. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set ont id MRCC1234ABCD channel 16 Command completed successfully Error Codes ONT is in the Emergency Disabled state Channel ID already used on this PON Channel ID already assigned to this ONT ONT does not exist ONT is pending serial number authentication Page 287 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis show ont registration-id (regid) Description Displays the ONT(s) that are configured with the registration ID. At the top of the report, the Registration ID is shown. For each ONT, the following is shown: - FSAN serial number, or pre-prov if the ONT is pre-provisioned - AID: For a registered ONT, the AID indicates the ONT address (slot-port-channel) For an unassigned ONT, the AID indicates the PON port address (slot-port). - OperStatus: Displays the current status of the ONT. The values are: - active (ONT is active) - ranging (ONT is being ranged) - recovery (ONT is recovering provisioning from the OLT) - fault (ONT has suffered an equipment failure) - ooc (out-of-contact: ONT ranging process retries have timed out, or that other failures are preventing the OLT from contacting the ONT). - oocpwr (out-of-contact due to ONT power and battery failure) - e-stop (emergency-stop: ONT has been set to the Emergency Stop state) - dwnld (download: software is being downloaded to the ONT) - battoper (battery-operation: ONT is operating on battery backup) - unasgnd: (unassigned) ONT has no channel ID assigned. More information is provided in the Unassigned Status column. - Unassigned Status: The Unassigned status values are: - ranged: ONT is ranging or ranged - ooc (out of contact): ONT is out of contact with the OLT - estop: ONT has been placed into E-stop state due to a reason other than SN authentication failure - fault: ONT has suffered an equipment fault - authfail (authentication failed): ONT has failed ONT SN authentication, and is in E-stop - n/a (ONT is not in the Unassigned state) - Registration Failure Reason: Diaplays the reason for registration failure for unassigned ONTs. If the ONT is registered, or if the ONT is preprovisioned, "n/a" is shown. User Privilege Level: Operator Required Parameters: registration-id regid Indicates the value for the Registration ID. It is a string of alphanumeric characters, up to a maximum length of 10 numbers. Special characters are not allowed. For example: 1234567890 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: Page 288 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis (one registered ONT matches) AXS2200> show ont registration-id 1234567890 =============================================================================== ONT Registration REPORT DATE: 08/17/2009 TIME: 16:08:22 =============================================================================== Registration ID: SN -----------MRCC33A490BC 1234567890 AID ---------au-5-1-1 Oper Status -------active Unassigned Status ---------n/a Registration Failure Reason ------------------------------n/a =============================================================================== Command completed successfully Example 2: (multiple ONTs match - one registered and the others not) AXS2200> show ont registration-id 1234567890 =============================================================================== ONT Registration REPORT DATE: 08/17/2009 TIME: 16:08:22 =============================================================================== Registration ID: 1234567890 SN -----------MRCC1198AB44 AID ---------au-15-1 Oper Status -------unasgnd Unassigned Status ---------ooc MRCC33A490BC MRCC7762177F au-5-1-1 au-5-1 active unasgnd n/a ranged Registration Failure Reason ------------------------------Registration ID already in use by a provisioned ONT n/a Registration ID already in use by a provisioned ONT =============================================================================== Command completed successfully Example 3: (one unassigned ONT matches) AXS2200> show ont registration-id 1234567890 =============================================================================== ONT Registration REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Registration ID: SN -----------MRCC7762177F 1234567890 AID ---------au-5-1 Oper Status -------unasgnd Unassigned Status ---------ranged Registration Failure Reason ------------------------------Unknown Registration ID =============================================================================== Command completed successfully Example 4: (Pre-provisioned ONT) AXS2200> show ont registration-id 1234567890 =============================================================================== ONT Registration REPORT DATE: 08/17/2009 TIME: 16:08:22 =============================================================================== Page 289 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis Registration ID: SN -----------pre-prov 1234567890 AID ---------au-5-1-1 Oper Status -------ooc Unassigned Status ---------n/a Registration Failure Reason ------------------------------n/a =============================================================================== Command completed successfully Error Codes Invalid Registration ID ONT does not exist ONT Registration is not configured Page 290 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis show stats ont poe (ontaddress) bin ({current | history}) Description This command is used to manage the Power over Ethernet (poe) feature. Specifically, this command is used to show the port level statistics for all of the Ethernet ports on the specified ont. The information displayed for each port includes the following: - Poe status ({Disabled|Searching|Requesting Pwr|Delivering Pwr|Fault}) Fault status ({None | Short Circuit | Overload Circuit | Other}) PD Classification ({No PD|Class 0|Class 1|Class 2|Class 3|Class 4|Unknown(Class0)}) Power consumed in Watts({range between 0.0-30.0}) Invalid Signature Counter ({integer}) Maintain Power Signature Absent Counter ({integer}) The system will deny a show stats ont poe request when received for an ONT that does not support power over ethernet, such as the ONT1120GE. User Privilege Level: Superuser Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Optional Parameters: bin {current | history} Selects which statistics bin. - current selects the current counter that is still active - history selects the prior interval that has completed Default Values Confirmation Message Command Completed Successfully. Example(s) Example 1: AXS2200> show stats ont poe au-10-1-2 =============================================================================== POE Report DATE: 7/28/2010 TIME: 20:15:40 =============================================================================== Name: alpha SN: MRCC12345678 Page 291 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Chassis ONT Address (AID): au-3-1-10 OLT PON Card: AGPOND ONT Operating Status: active Bin: current Pwr Invalid MPS Fault PD Consumed Signature Absent Port Status Status Class (in Watts) Counter Counter ----------------- ------- ---------------------------1 Delivering pwr None 2 6.8 0 3 2 Delivering pwr None 2 6.8 0 5 3 Searching None No PD 0.0 10 56 4 Disabled None No PD 0.0 0 0 =============================================================================== Command completed successfully Error Codes Invalid for pre-provisioned ONTs without serial numbers Invalid ONT Invalid ONT equipment state for request Page 292 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 293 ONT Provisioning - Chassis AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports ONT Provisioning - Ports del profile poeconfig name (poeconfigname) Description This command is used to manage the Power over Ethernet (poe) feature. Specifically, this command is used to delete a poeconfig port profile. Only profiles that are not in use may be deleted. Note: qbdef and default profiles cannot be deleted. User Privilege Level: Superuser Required Parameters: name poeconfigname The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values None. Confirmation Message Command completed successfully. Example(s) AXS2200> del profile poeconfig name voip_port Command completed successfully. Error Codes Default profiles cannot be deleted Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Page 294 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port dataport (ontdataaddress) pbit0 (etherlist) pbit1 (etherlist) pbit2 (etherlist) pbit3 (etherlist) pbit4 (etherlist) pbit5 (etherlist) pbit6 (etherlist) pbit7 (etherlist) Description Specifies one or more Ethertype values mapped to each P-bit for an ONT port. When 'none' is specified for a P-bit, it resets previously assigned Ethertypes for that P-bit. For any unspecified Ethertype, the P-bit value of corresponding packets will be determined by other means (e.g., dscpmap, pbitremap, fixed priority, etc.). User Privilege Level: Superuser Required Parameters: ontdataaddress dataport Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - porttype (enet, moca, hcna, vdsl2) - index (1-n) Optional Parameters: pbit0 etherlist etherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the use of spaces, or alternately, a constant string "none". pbit1 etherlist etherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the use of spaces, or alternately, a constant string "none". pbit2 etherlist etherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the use of spaces, or alternately, a constant string "none". pbit3 etherlist etherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the use of spaces, or alternately, a constant string "none". pbit4 etherlist etherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the Page 295 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports use of spaces, or alternately, a constant string "none". pbit5 etherlist etherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the use of spaces, or alternately, a constant string "none". pbit6 etherlist etherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the use of spaces, or alternately, a constant string "none". pbit7 etherlist eetherlist is either a up-to 128 character string consisting of hex numbers separated by commas (",") and without the use of spaces, or alternately, a constant string "none". Default Values pbit0 = none pbit1 = none pbit2 = none pbit3 = none pbit4 = none pbit5 = none pbit6 = none pbit7 = none Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port dataport au-14-1-1-ent-1 pbit3 0x0806,0x0800 pbit4 none Command completed successfully Error Codes Ethertype to Pbit assignment must be unique Maximum number of Ethertypes reached ONT does not support this functionality ONT Invalid port Pbit0 has invalid etherlist Pbit1 has invalid etherlist Pbit2 has invalid etherlist Pbit3 has invalid etherlist Pbit4 has invalid etherlist Pbit5 has invalid etherlist Pbit6 has invalid etherlist Pbit7 has invalid etherlist At least one attribute is required to be set Page 296 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port dataport (ontdataaddress) l2config (l2configname) Description Define the Layer 2 profile for the data traffic. This profile is valid for both single-tagged and double-tagged VLANs. If it is not explicitly configured, then the default profile will be used. Note: the port must be disabled before the profile can be changed. Note: For the ONT1100GE and ONT1500GT, if the "trustpbit" = yes in the profile, and there is a TLS connection, then the "trustpbit" setting is ignored. User Privilege Level: Superuser Required Parameters: l2config l2configname Add a Layer 2 VLAN profile (l2configname) to an ONT Port. This profile is valid for both single-tagged and double-tagged VLANs dataport ontdataaddress Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - porttype (enet, moca, hcna, vdsl2) - index (1-n) Default Values Confirmation Message WARNING: This changes the ONT QoS Configuration Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> set ont port dataport au-5-1-16-enet-1 l2config alpha WARNING: This changes the ONT QoS Configuration Do you want to continue? y|n >y Command completed successfully. Page 297 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes ONT does not support this functionality VLAN - Cannot change TLS setting when a VLAN member exists on the port ONT Invalid port Profile name not found in Profile Table VLAN - Port must be disabled before the profile can be changed Page 298 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port enet (ontenetaddress) bmc-rate (rate) Description Allows the user to apply a rate limiting settings for the ethernet port. The range of values for ports with 1 Gigabit port speed is 0, 125-1488095 packets per second The range of values for a 10/100T-Base Ethernet port 0, 125-148809 packets per second For ONTs SF21000, SF24200, SF24210, and WG24200G the ranges are always 0, 125-500 packets per second for their Ethernet ports (applies to both GigE or 10/100BaseT). Note that these ONTs support a maximum throughput rate of 1000 packets per second shared across all ports (i.e. ethernet and pon ports) regardless of the configuration. Note: 0 pps means no rate limit. User Privilege Level: Admin Required Parameters: enet ontenetaddress Specifies the ONT Ethernet port address. It takes the following format:, - oltslot-port-channel-enet-index (e.g. au-3-4-16-enet-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) bmc-rate rate Broadcast and Multicast and Unknown Unicast rate limit expressed in packets per second. Note: The rate limiting is actually done on a bps basis. The pps setting is converted internally to a bps setting by assuming 64 byte packets. Default Values bmc-rate = 500 Confirmation Message This will affect the port filter rate for broadcast and multicast packets. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (set Broadcast Multicast Rate) AXS2200> set ont port enet au-5-1-16-enet-1 bmc-rate 15000 This will affect the port filter rate for broadcast and multicast packets. Page 299 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Do you want to continue? >y ONT Provisioning - Ports y | n Command completed successfully Error Codes Invalid port Port state must be set to disable first Invalid Broadcast/Multicast Rate ONT does not support this functionality Page 300 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port enet (ontenetaddress) profile (enetprofile) Description Allows the user to assign an Ethernet port profile to the indicated ONT port. To assign a profile, the port state must be set to disable. This command is not allowed during a software download or when the ONT is operating on battery backup. Any attribute in the profile that is not supported for the ONT will be ignored. User Privilege Level: Superuser Required Parameters: profile enetprofile Indicates the unique name of the entry in the enetport profile table. enet ontenetaddress Specifies the ONT Ethernet port address. It takes the following format:, - oltslot-port-channel-enet-index (e.g. au-3-4-16-enet-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values System initialization will set the profile to qbdef. Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (Ethernet port) AXS2200> set ont port enet au-5-1-16-enet-1 profile alpha This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Page 301 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes ONT is in wrong state for this request Profile name not found in Profile Table Profile settings not supported on this ONT ONT Invalid port Port state must be set to disable first Page 302 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port enet (ontenetaddress) state ({enable | disable}) Description Sets the ONT Ethernet port to an administrative state of enabled, or disabled. This setting may be set independently from the connection state. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). enet ontenetaddress Specifies the ONT Ethernet port address. It takes the following format:, - oltslot-port-channel-enet-index (e.g. au-3-4-16-enet-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values state=enable Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (Ethernet port) AXS2200> set ont port enet au-5-1-16-enet-1 state disable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT Invalid port Invalid ONT equipment state for request Page 303 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port hcna (onthcnaaddress) bmc-rate (rate) Description Allows the user to apply a rate limiting settings for the HCNA port. The range of values for the HCNA port will have a range similar to a 10/100T-Base Ethernet port - 0, 125-148809 packets per second Note: 0 pps means no rate limit. User Privilege Level: Admin Required Parameters: bmc-rate rate Broadcast and Multicast and Unknown Unicast rate limit expressed in packets per second. Note: The rate limiting is actually done on a bps basis. The pps setting is converted internally to a bps setting by assuming 64 byte packets. hcna onthcnaaddress Specifies the ONT HCNA port address. It takes the following format: - oltslot-port-channel-hcna-index (e.g. au-5-1-16-hcna-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1) Default Values bmc-rate = 500 Confirmation Message This will affect the port filter rate for broadcast and multicast packets. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (set Broadcast Multicast Rate) AXS2200> set ont port hcna au-5-1-16-hcna-1 bmc-rate 38000 This will affect the port filter rate for broadcast and multicast packets. Do you want to continue? y | n >y Command completed successfully Page 304 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes Port state must be set to disable first ONT does not support this functionality Invalid Broadcast/Multicast Rate Invalid port Page 305 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port hcna (onthcnaaddress) datastate ({enable | disable}) Description Sets the HCNA port setting for enabling or disabling data traffic. In order for the HCNA port to carry data traffic, a connection must be defined. User Privilege Level: Superuser Required Parameters: datastate {enable | disable} Indicates whether the data state is administratively set to enable or disable. hcna onthcnaaddress Specifies the ONT HCNA port address. It takes the following format: - oltslot-port-channel-hcna-index (e.g. au-5-1-16-hcna-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1) Default Values datastate=enable Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port au-5-1-16-hcna-1 datastate enable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid ONT equipment state for request Invalid port Page 306 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port hcna (onthcnaaddress) profile (name) Description Allows the user to apply the attribute settings from a specific entry in the hcnaport profile to the HCNA port. To assign a profile, the hcna port datastate must be set to disable. User Privilege Level: Superuser Required Parameters: profile name Indicates the HCNA port profile hcna onthcnaaddress Specifies the ONT HCNA port address. It takes the following format: - oltslot-port-channel-hcna-index (e.g. au-5-1-16-hcna-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1) Default Values System initialization will set the profile to qbdef Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port hcna au-3-1-16-hcna-1 profile data10 This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT is in wrong state for this request Profile name not found in Profile Table Profile settings not supported on this ONT Port state must be set to disable first Invalid port Page 307 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port moca (ontmocaaddress) pwrcontrol (mode) pwrlevel (value) Description Sets the MoCA port power leveling mode and power level. These parameters are not settable in a profile. At least one attribute must be set. If an attribute is not provided, the value will remain unchanged for that particular attribute. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: ontmocaaddress moca Specifies the ONT MoCA port address. It takes the following format: - oltslot-port-channel-moca-index (e.g. au-5-1-16-moca-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1) Optional Parameters: pwrlevel value Sets the transmit power level by index (1-10). 10 is the highest value, and each step reduces the power level by a factor of 3dBm. When automatic power control is disabled, this sets the power level to this value. When automatic power control is enabled, this sets the upper limit for transmit power. pwrcontrol mode Sets the mode for power control: - auto: automatically selects the minimum power level appropriate for good transmission of the target phy rate to individual nodes. - manual: the transmit level is specified and is not automatically adjusted. Default Values pwrcontrol = auto pwrlevel = 5 for ONT1000GT and ONT1000GT2 pwrlevel = 3 for ONT1500GT Confirmation Message This affects power control and power level provisioning for the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port moca au-5-1-1-moca-1 pwrcontrol manual pwrlevel 6 Page 308 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports This affects power control and power level provisioning for the port. Do you want to continue? y | n >y Command completed successfully Error Codes At least one attribute is required to be set Invalid pwrcontrol setting Invalid ONT equipment state for request Invalid power level ONT Invalid port Page 309 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port moca (ontmocaaddress) datastate ({enable | disable}) Description Sets the MoCA port setting for enabling or disabling data traffic. In order for the MoCA port to carry data traffic, a connection must be defined. Only one connection can be defined to either the ONT Ethernet port or the ONT MoCA port. User Privilege Level: Superuser Required Parameters: datastate {enable | disable} Indicates whether the data state is administratively set to enable or disable. moca ontmocaaddress Specifies the ONT MoCA port address. It takes the following format: - oltslot-port-channel-moca-index (e.g. au-5-1-16-moca-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1) Default Values datastate=enable Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port au-5-1-16-moca-1 datastate enable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT Invalid port Invalid ONT equipment state for request Page 310 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port moca (ontmocaaddress) profile (name) Description Allows the user to apply the attribute settings from a specific entry in the mocaport profile to the MoCA port. To assign a profile, the moca port datastate must be set to disable. This command is not allowed during a software download or when the ONT is operating on battery backup. Any attribute in the profile that is not supported for the ONT will be ignored. User Privilege Level: Superuser Required Parameters: profile name Indicates the entry in the MoCA port profile. moca ontmocaaddress Specifies the ONT MoCA port address. It takes the following format: - oltslot-port-channel-moca-index (e.g. au-5-1-16-moca-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1) Default Values System initialization will set the profile to qbdef Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port moca au-3-1-16-moca-1 profile data10 This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Page 311 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes ONT is in wrong state for this request Profile name not found in Profile Table Profile settings not supported on this ONT ONT Invalid port Port state must be set to disable first Page 312 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port pots (ontpotsaddress) profile (potsprofile) Description Allows the user to assign a POTS port profile to the indicated ONT port. To assign a profile, the port state must be set to disable. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: profile potsprofile Indicates the unique name of the entry in the potsport profile table. pots ontpotsaddress Specifies the ONT POTS port address. It takes the following format: - oltslot-port-channel-pots-index (e.g. au-3-4-16-pots-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values System initialization will set the profile to qbdef. Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (POTS port) AXS2200> set ont port au-5-1-16-pots-1 profile alpha This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT is in wrong state for this request Profile name not found in Profile Table Profile settings not supported on this ONT ONT Invalid port Port state must be set to disable first Page 313 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 314 ONT Provisioning - Ports AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port pots (ontpotsaddress) state ({enable | disable}) Description Sets the ONT POTS port to an administrative state of enabled, or disabled. This setting may be set independently from the connection state. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). pots ontpotsaddress Specifies the ONT POTS port address. It takes the following format: - oltslot-port-channel-pots-index (e.g. au-3-4-16-pots-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values state=enable Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (pots port) AXS2200> set ont port pots au-3-1-16-pots-2 state disable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT Invalid port Invalid ONT equipment state for request Page 315 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port vdsl (ontvdsladdress) bandplan ab10m (value) ab12m (value) ab15m (value) ab17m (value) ab20m (value) ab30m (value) ab40m (value) ab80m (value) ab160m (value) adslb640 (value) Description Sets the VDSL2 bandplan notching attributes for the port. These parameters are not settable in a profile. At least one attribute must be set. If an attribute is not provided, the value will remain unchanged for that particular attribute. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: bandplan Sets the VDSL bandplan parameters ontvdsladdress vdsl Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Optional Parameters: ab15m value Sets the notching for the amateur band 15m (21000 - 21450 kHz): -enable -disable ab30m value Sets the notching for the amateur band 30m (10100 - 10150 kHz): -enable -disable ab80m value Sets the notching for the amateur band 80m (3500-4000 kHz): -enable -disable ab160m value Sets the notching for the amateur band 160m (1800 - 2000khz): -enable Page 316 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports -disable adslb640 value Sets the notching for the ADSL Band mask (0-640 kHz): -enable -disable ab17m value Sets the notching for the amateur band 17m (18068 - 18168 kHz): -enable -disable ab40m value Sets the notching for the amateur band 40m (7000-7300 kHz) -enable -disable ab10m value Sets the notching for the amateur band 10m (28000 -29700 kHz): -enable -disable ab12m value Sets the notching for the amateur band 12m (24890 - 24990 kHz): -enable -disable ab20m value Sets the notching for the amateur band 20m (14000 - 14350 kHz): -enable -disable Default Values ab10m = enable ab12m = enable ab15m = enable ab17m = enable ab20m = enable ab30m = enable ab40m = enable ab80m = enable ab160m = enable adslb640 = enable Confirmation Message This will affect the filtering of amateur band(s) for the port. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port vdsl au-5-1-1-vdsl2-1 bandplan adslb640 enable This will affect the filtering of amateur band(s) for the port. Do you want to continue? y|n >y Command completed successfully Page 317 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes Invalid setting for Amateur Band 10m (ab10m) Invalid setting for Amateur Band 12m (ab12m) Invalid setting for Amateur Band 15m (ab15m) Invalid setting for Amateur Band 17m (ab17m) Invalid setting for Amateur Band 20m (ab20m) Bandplan notch does not apply to VDSL (v1) port Invalid setting for ADSL Band (adslb640) ONT is in wrong state for this request Invalid setting for Amateur Band 160m (ab160m) Invalid setting for Amateur Band 30m (ab30m) Invalid setting for Amateur Band 40m (ab40m) Invalid setting for Amateur Band 80m (ab80m) At least one attribute is required to be set Invalid port Page 318 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port vdsl (ontvdsladdress) bmc-rate (rate) Description Allows the user to apply a rate limiting settings for the vdsl2 port. Broadcast/Multicast rate limiting for an ONT vdsl2 Port with 120 Mbps port speed can be set in the following range: The range of values for the VDSL2 port: 0, 125-178571 packets per second (pps). Note; 0 pps means no rate limit. User Privilege Level: Admin Required Parameters: bmc-rate rate Broadcast and Multicast and Unknown Unicast rate limit expressed in packets per second. Note: The rate limiting is actually done on a bps basis. The pps setting is converted internally to a bps setting by assuming 64 byte packets. vdsl ontvdsladdress Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values bmc-rate = 500 Confirmation Message This will affect the port filter rate for broadcast and multicast packets. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (set Broadcast Multicast Rate) AXS2200> set ont port vdsl au-5-1-16-vdsl2-1 bmc-rate 1500 This will affect the port filter rate for broadcast and multicast packets. Do you want to continue? y | n >y Command completed successfully Page 319 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes Invalid port Port state must be set to disable first ONT does not support this functionality Invalid Broadcast/Multicast Rate Page 320 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port vdsl (ontvdsladdress) channel down-maxrate (value) up-maxrate (value) down-maxintdelay (value) up-maxintdelay (value) down-minrate (value) up-minrate (value) down-inp (value) up-inp (value) Description Sets the VDSL2 channel attributes. These parameters are not settable in a profile. At least one attribute must be set. If an attribute is not provided, the value will remain unchanged for that particular attribute. The actual rate is dependent on the settings for Impulse Noise Protection (INP) and Maximum Interleave Delay. The user must ensure that the provisioned rate is within the supported range per the tables below, because the system will not automatically ensure that the data rate is valid. If the provisioned rate exceeds the rates indicated in the table, the VDSL link will fail to successfully train. The data rate in the tables is provided in kb/s. DOWNSTREAM Max Interleave INP Setting (in number of symbols) Delay (ms) 1 2 4 ------------------------ ---------- ---------2 110,000 75,000 25,000 4 110,000 110,000 75,000 8 110,000 110,000 75,000 16 110,000 110,000 75,000 UPSTREAM Max Interleave INP Setting (in number of symbols) Delay (ms) 1 2 4 ------------------------ ---------- ---------2 65,000 50,000 25,000 4 70,000 65,000 55,000 8 70,000 65,000 60,000 16 70,000 65,000 60,000 This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: channel Specifies the VDSL channel parameters. vdsl ontvdsladdress Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} Page 321 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Optional Parameters: down-minrate value Sets the downstream minimum data rate. The range is 100 -120000 kb/s. The actual configured rate will be rounded up to the nearest multiple of 64. The minimum data rate must be set to a value that is less than the maximum data rate. value up-minrate Sets the upstream minimum data rate. The range is 100 -120000 kb/s. The actual configured rate will be rounded up to the nearest multiple of 64. The minimum data rate must be set to a value that is less than the maximum data rate. value down-maxrate Sets the downstream maximum data rate. The range is 100 -120000 kb/s. The actual configured rate will be rounded up to the nearest multiple of 64. value up-maxrate Sets the upstream maximum data rate. The range is 100 -120000 kb/s. The actual configured rate will be rounded up to the nearest multiple of 64. down-maxintdelay value Sets the downstream maximum interleave delay in milliseconds. Valid values are 2 - 63 ms. This value must be greater than or equal to the upstream maximum interleave delay. up-maxintdelay value Sets the upstream maximum interleave delay in milliseconds. Valid values are 2 - 63 ms. This value must be lesser than or equal to the downstream maximum interleave delay. down-inp value Sets the minimum downstream impulse noise protection. Valid symbol values are {0, half, 1, 2, 4, 16} up-inp value Sets the minimum upstream impulse noise protection. Valid symbol values are {0, half, 1, 2, 4, 16}. Default Values Page 322 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports down-maxrate = 18560 kb/s up-maxrate = 2432 kb/s down-maxintdelay = 8 ms up-maxintdelay = 8 ms down-minrate = 256 kb/s up-minrate = 256 kb/s down-inp = 2 up-inp = 2 Confirmation Message This will change port configuration settings which affect services. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (VSDL2) AXS2200> set ont port vdsl au-5-1-1-vdsl2-1 channel down-maxrate 25000 up-maxrate 12000 down-minrate 20000 up-minrate 8000 This will change port configuration settings which affect services. Do you want to continue? y | n >y Command completed successfully Error Codes ONT is in wrong state for this request Invalid downstream max rate Invalid downstream maximum interleave delay Invalid upstream max rate Invalid upstream maximum interleave delay Invalid downstream INP Invalid upstream INP Up-maxintdelay must be less than or equal to down-maxintdelay Invalid downstream minimum rate Invalid upstream minimum rate Invalid port Page 323 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port vdsl (ontvdsladdress) line down-snrtarget (value) down-snrmin (value) up-snrtarget (value) up-snrmin (value) Description Sets the VDSL2 line parameters for signal to noise margin. These parameters are not settable in a profile. At least one attribute must be set. If an attribute is not provided, the value will remain unchanged for that particular attribute. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: line Specifies the VDSL line parameters. vdsl ontvdsladdress Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Optional Parameters: value down-snrtarget Sets the downstream target signal to noise ratio. Values can be in the range from 0-31.0 dB in 0.1 dB increments. down-snrmin value Sets the downstream minimum signal to noise ratio. Values can be in the range from 0-31.0 dB in 0.1 dB increments. up-snrtarget value Sets the downstream target signal to noise ratio. Values can be in the range from 0-31.0 dB in 0.1 dB increments. up-snrmin value Sets the upstream minimum signal to noise ratio. Values can be in the range from 0-31.0 dB in 0.1 dB increments. Default Values Page 324 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports down-snrtarget = 6.0 dB down-snrmin = 3.0 dB up-snrtarget = 6.0 dB up-snrmin = 3.0 dB Confirmation Message This will change port configuration settings which affect services. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (all parameters) AXS2200> set ont port vdsl au-5-1-1-vdsl2-1 line down-snrtarget 7.0 down-snrmin 3.3 up-snrtarget 7.0 up-snrmin 3.3 This will change port configuration settings which affect services. Do you want to continue? y | n >y Command completed successfully Example 2: (some parameters) AXS2200> set ont port vdsl au-5-1-1-vdsl2-1 line down-snrtarget 7.0 up-snrtarget 7.0 This will change port configuration settings which affect services. Do you want to continue? y | n >y Command completed successfully Error Codes ONT is in wrong state for this request Invalid downstream minimum SNR Invalid upstream minimum SNR Invalid upstream target SNR Downstream Minimum SNR must be less than the downstream Target SNR Upstream Minimum SNR must be less than the upstream Target SNR Invalid downstream target SNR Invalid port Page 325 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port vdsl (ontvdsladdress) profile (vdslprofile) Description Allows the user to assign a VDSL port profile to the indicated ONT port. To assign a profile, the port state must be set to disable. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: profile vdslprofile Indicates the unique name for the entry in the vdslport profile table. vdsl ontvdsladdress Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values System initialization will set the profile to qbdef. Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (VDSL2 port) AXS2200> set ont port vdsl au-5-1-16-vdsl2-1 profile alpha This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT is in wrong state for this request Profile name not found in Profile Table ONT Invalid port Port state must be set to disable first Page 326 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 327 ONT Provisioning - Ports AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port vdsl (ontvdsladdress) state ({enable | disable}) Description Sets the ONT VDSL2 port to an administrative state of enabled, or disabled. This setting may be set independently from the connection state. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). vdsl ontvdsladdress Specifies the ONT VDSL2 interface address. It takes the following format - oltslot-port-channel-vdsl2-index (e.g. au-5-1-1-vdsl2-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values state=enable Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (VDSL2 port) AXS2200> set ont port vdsl au-5-1-16-vdsl2-1 state disable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT Invalid port Invalid ONT equipment state for request Page 328 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port video (ontvideoaddress) ont-no-override Description Specifies that the ONT-port based hivideoinpwralarm and lowvideoinpwralarm values (if configured before) shall be discarded. Instead, this video port should use the current PON-port based hivideoinpwralarm and lowvideopwralarm instead. User Privilege Level: Superuser Required Parameters: ont-no-override Specifies that the ONT-port based hivideoinpwralarm and lowvideoinpwralarm (if configured previously) shall be discarded. The ONT should use the current PON-port based hivideoinpwralarm and lowvideoinpwralarm parameters instead. video ontvideoaddress Indicates the address of the port carrying video traffic: - oltslot-port-channel-video-1 (for video-only RF ports) - oltslot-port-channel-moca-1 (for RF ports that carry both video and MOCA) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set ont port video au-5-1-1-video-1 ont-no-override Command completed successfully Example 2: (set on Moca port) AXS2200> set ont port video au-5-1-2-moca-1 ont-no-override Command completed successfully Error Codes Invalid ONT equipment state for request ONT Invalid port Page 329 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port video (ontvideoaddress) ont-override hivideoinpwralarm (value) lowvideoinpwralarm (value) Description Set the ONT-port based hivideoinpwralarm and lowvideoinpwralarm, beyond which an alarm will be raised. These values shall override the PON-port based threshold parameters. User Privilege Level: Superuser Required Parameters: ont-override Specifies that PON-port based hivideoinpwralarm and lowvideoinpwralarm shall be overridden by the two values configured in this CLI command. hivideoinpwralarm value The Received Optical Power Limit (High) above which an alarm will be generated Allowed Range: -1.0 dBm to +3.0 dBm, in 0.1 dBm steps lowvideoinpwralarm value The Received Optical Video Power Threshold (Low) below which an alarm will be generated. Allowed Range: -12.7 dBm to -5.0 dBm, in 0.1 dBm steps video ontvideoaddress Indicates the address of the port carrying video traffic: - oltslot-port-channel-video-1 (for video-only RF ports) - oltslot-port-channel-moca-1 (for RF ports that carry both video and MOCA) - oltslot-port-channel-hcna-1 (for RF ports that carry both video and HCNA) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set ont port video au-5-1-1-video-1 ont-override hivideoinpwralarm 2.4 lowvideoinpwralarm -6.2 Command completed successfully Example 2: (set on Moca port) AXS2200> set ont port video au-5-1-2-moca-1 ont-override hivideoinpwralarm 2.4 lowvideoinpwralarm -6.2 Command completed successfully Page 330 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes Invalid ONT equipment state for request ONT Invalid port Invalid high power alarm threshold setting Invalid low power alarm threshold setting Page 331 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port video (ontvideoaddress) profile (videoprofile) Description Sets the videoport profile to use on either the Video-only or the combination MoCA/Video or HCNA/Video interface port. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: profile videoprofile Indicates the unique name for the entry in the videoport profile table. video ontvideoaddress Indicates the address of the port carrying video traffic: - oltslot-port-channel-video-1 (for video-only RF ports) - oltslot-port-channel-moca-1 (for RF ports that carry both video and MOCA) - oltslot-port-channel-hcna-1 (for RF ports that carry both video and HCNA) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values System initialization will set the profile to qbdef. Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (ONT that supports video only on the RF port) AXS2200> set ont port video au-5-1-1-video-1 profile alpha This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example 2: (ONT that supports video and moca on the RF port) AXS2200> set ont port video au-5-1-1-moca-1 profile alpha This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Page 332 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes ONT is in wrong state for this request Profile settings not supported on this ONT Invalid ONT equipment state for request ONT Invalid port Profile name not found in Profile Table Port state must be set to disable first Page 333 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set ont port video (ontvideoaddress) state ({enable | disable}) Description Sets the ONT port to an administrative state of enabled, or disabled. This setting may be set independently from the connection state. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). video ontvideoaddress Indicates the address of the port carrying video traffic: - oltslot-port-channel-video-1 (for video-only RF ports) - oltslot-port-channel-moca-1 (for RF ports that carry both video and MOCA) - oltslot-port-channel-hcna-1 (for RF ports that carry both video and HCNA) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values state=disable Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (ONT that supports video only on the RF port) AXS2200> set ont port video au-5-1-16-video-1 state enable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example 2: (ONT that supports video and moca on the RF port) AXS2200> set ont port video au-5-1-16-moca-1 state enable This will affect services on the port. Do you want to continue? y | n >y Page 334 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Command completed successfully Example 3: (ONT that supports video and hcna on the RF port) AXS2200> set ont port video au-5-1-16-hcna-1 state enable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Bandwidth exceeds ONT capacity ONT Invalid port Invalid ONT equipment state for request Page 335 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set profile lldp-med default-name (name) Description Allows the user to select which of the configured LLDP-MED profiles will be applied as default. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set profile lldp-med default-name pol-21 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 336 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports set profile lldp-med name (name) state (enabled | disabled) voip-bear-tag (tagged | untagged) voip-sig-tag (tagged | untagged) voip-bear-vid (vid) voip-sig-vid (vid) voip-bear-pbit (value) voip-sig-pbit (value) voip-bear-dscp (value) voip-sig-dscp (value) txinterval (timer) Description Sets an entry of the LLDP-MED ONT Ethernet port profile table. If some of the attributes are not specified, the default values will be used. This profile may be applied to any ONT Ethernet port. Initially, each port is assigned the default profile that sets all attributes to their defaults. To apply a different profile to an Ethernet port, refer to the "set port ont" command. Profiles cannot be modified once they are set. Individual profile names may be deleted using the "del profile" command. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. state enabled | disabled Enables or Disables the LLDP-MED protoccol on the Ethernet Port Optional Parameters: voip-bear-vid vid Voice Bearer Traffic VLAN ID Valid Range: 0, 2 - 4085 value voip-bear-pbit pbit value (0 - 7) to use for VoIP bearer traffic originating at the ONT. value voip-bear-dscp DSCP value (0 - 63) to insert in VoIP bearer traffic originating at the ONT. voip-sig-pbit value pbit value (0 - 7) to use for VoIP signaling traffic originating at the ONT. voip-sig-dscp value DSCP value (0 - 63) to insert in VoIP signaling traffic originating at the ONT. voip-sig-vid vid Voice Signaling Traffic VLAN ID Valid Range: 0, 2 - 4085 Page 337 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA txinterval ONT Provisioning - Ports timer Specifies the interval in seconds at which LLDP Frames are transmitted. Valid Range: 1 - 65535 Default: 30 voip-bear-tag tagged | untagged Tagging Mode for the Voice Bearer Traffic Flow. voip-sig-tag tagged | untagged Tagging Mode for the Voice Signaling Traffic Flow. Default Values state=disabled voip-bear-tag=untagged voip-sig-tag=untagged voip-bear-vid=0 voip-sig-vid=0 voip-bear-pbit=6 voip-sig-pbit=5 voip-bear-dscp=46 voip-sig-dscp=24 txinterval=30 Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set profile lldp-med name pol-21 state enabled voip-bear-pbit 6 voip-sig-pbit 6 voip-bear-dscp 46 voip-sig-dscp 46 txinterval 45 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Page 338 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Error Codes Invalid name Maximum number of allowed profiles exceeded Invalid VoIP Bearer DSCP Invalid VoIP Bearer pbit Invalid VoIP Bearer Tagging mode Invalid VoIP Bearer VLAN ID Invalid VoIP Signaling DSCP Invalid VoIP Signaling pbit Invalid VoIP Signaling Tagging mode Invalid VoIP Signaling VLAN ID Name already in use Invalid state value Page 339 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports show ont pon (ontponaddress) Description Reports the provisioning on the ONT PON port. The report includes these fields: - ONT Name - ONT Serial Number: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - ONT Address (AID) - OLT PON Card Type - ACL-IP: The name of the provisioned IP Layer Access Control List - ACL-MAC: The name of the provisioned MAC Layer Access Control List User Privilege Level: Operator Required Parameters: ontponaddress Specifies the ONT PON port address. It takes the following format:, - oltslot-port-channel-pon-index (e.g. au-3-4-16-pon-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show ont pon au-3-1-16-pon-1 =============================================================================== ONT PON REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Address (AID): au-3-1-16-pon-1 OLT PON Card: AGPOND ACL-IP: qbdef ACL-MAC: qbdef =============================================================================== Command completed successfully Error Codes Invalid port Page 340 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports show ont port (ontportaddr) detail (summary | verbose) Description Used to display the configuration and profile settings for a single ONT port. If detail is set to verbose, some port types may return additional debug information useful for troubleshooting problems. If not supplied by the user, it will default to summary. The report always includes these fields: - ONT Name - ONT Serial Number: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - ONT Channel on the PON - ONT Address (AID) - OLT PON Card Type - Actual ONT Card Type for the port (the ONT card type may be virtual). - Member of VLAN(s): For each VLAN configured on the port, the S-VID, C-VID, CPE-VID, TCONT and OLT S-VLAN Name are shown. Dashes (-) are used to indicate that the setting does not apply. - Port Admin State: enable, disable - Port Loopback State: line, pon, none - Port Oper State: up, down, or unk (unknown) - Port Profile Type - Port Profile Name and all the configured settings - Any individual port settings follow. DS0 POTS Ports use the potsport profile: ARC: enable, disable ARC Interval (minutes): given in minutes SignalCode: loopstart, groundstart, loopreversebattery, coinfirst, dialtonefirst, multiparty (not user-settable) Impedance (ohms): 600 (not user-settable) Drop Phy Detect (seconds): 0-65535 No Grant Detect (seconds): 0-65535 Transmit A/D Gain (decibels): -11 to 0 Receive D/A Gain (decibels): -11 to 0 ** If configured for tdm-h248 or eh248: H248 Oper. Status: {MGnotConfig, portNotConfig, configDone, registered, failReg(reason), failOutCall(reason)} where reason = {no IP address, timeout, no DS0 resources} /* information for the duration of a call */ Status: {active, idle} (active includes the ringing state) If "idle", the following data for the previous call (if any) will be provided. Packet Period: X ms or n/a (if no previous call) Remote IP Address and Port, or n/a (if no previous call) Codec Used: {G.711 u-law, G.711 a-law, G.729, n/a) Time and Date of Call: {mm/dd/yyyy hh:mm:ss} or n/a Duration of Call: (seconds) Count of RTP packets sent: Count of RTP packets received: Count of RTP packets lost: ** If configured for VOIP-SIP: Switch Registration Status: {none, unknown, UAnotconfig, portNotConfig, configDone, registered, failReg (reason)} Page 341 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports where reason = {ICMP error, cannot open TCP socket, cannot authenticate, timeout, servFailCode, cannot open TLS session, malformed document, cannot resolve domain name} Server Failure Code Value: non zero if reason == servFailCode n/a otherwise Subscription Status: {none, configDone, failConfigSubscr(reason), failConfigGet(reason)} where reason = { cannot authenticate, timeout, servFailCode, malformed document, cannot resolve domain name} Server Failure Code Value: non zero if reason == servFailCode n/a otherwise Affected Profile/Event: = {Device profile, Application profile, User profile, callFwd-event, MWI-event, bridgedLineDialog-event, callFwd-redirect} when Oper. Status = failConfigSubscr or failConfigGet = {n/a} otherwise Call Invite Failure Status: { none, unknown, failinvite(reason)} where reason = { ICMP error, cannot authenticate, timeout, servFailCode, cannotResolveDomainName } Call Invite Failure Code: {n/a = no failure, error code number in case of servFailCode failure} Local AoR (userPart): string (up to 25 char displayed) to the left of the "@" symbol in the AoR PortSessionType: {none/Idle, 2way, 3way, fax, conference, telemetry, bridged line, call barge-in, intercom} (idle will include the ringing phase) /* information for the first leg of the call */ Call 1 Status: {idle, on-hold, active, failInvite(ICMP error/cannot authenticate/ cannotOpenTCPsocket/timeout/servFailCode/cannotResolveDomainName)} Call 1 Direction: {outgoing | incoming} Call 1 Packet Period: Negotiated (or n/a if no previous call) Call 1 Remote IP Address and Port(or n/a if no previous call) Codec Used: Negotiated {G.711 u-law, G.711 a-law, G.729A, G.729AB, n/a) Time and Date of Call: {mm/dd/yyyy hh:mm:ss} or n/a Duration of Call: (seconds) Count of RTP packets sent: Count of RTP packets received: Count of RTP packets lost: Remote party runs/ran RTCP: {yes, no, n/a} Session refresher: {localUA, remoteUA, session keepalive disabled} Min-SE: minimum session expiration interval in seconds (2 byte value) Max-SE: maximum session expiration interval/duration in seconds (2 byte value) /* information for the second leg of the call */ Call 2 Status: {idle, on-hold, active, failInvite(ICMP error/cannot authenticate/ cannotOpenTCPsocket/timeout/servFailCode/cannotResolveDomainName)} Call 2 Direction: {outgoing | incoming} Call 2 Packet Period: Negotiated (or n/a if 3way not active) Call 2 Remote IP Address and Port(or n/a if 3way not active) Codec Used: Negotiated {G.711 u-law, G.711 a-law, G.729A, G.729AB, n/a) Time and Date of Call: {mm/dd/yyyy hh:mm:ss} or n/a Duration of Call: (seconds) Count of RTP packets sent: Page 342 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Count of RTP packets received: Count of RTP packets lost: Remote party runs/ran RTCP: {yes, no, n/a} Session refresher: {localUA, remoteUA, session keepalive disabled} Min-SE: minimum session expiration interval in seconds (2 byte value) Max-SE: maximum session expiration interval/duration in seconds (2 byte value) If detail is set to verbose, additional SIP data will be supplied in text format, such as data on recent profile downloads, their state, timestamp and counter as well as the current contents of device, application and user profiles retrieved from the ONT for this port. Ethernet Ports use the enetport profile: ARC: enable, disable ARC Interval (minutes): given in minutes dot1x: enable, disable Autodetect: auto, 10full, 10half, 100full, 100half For Ethernet, these individual port states and settings are also displayed: Actual Rate/Duplex Mode: 10full, 10half, 100full, 100half, 1000full, unk (if the ONT is not currently ranged or is preprovisioned) not established (if the ONT is ranged and good, but no Ethernet link is established). dot1x Authentication: for each supplicant, display the following: Supplicant MAC address: xx-xx-xx-xx-xx-xx State: authed, InProgress, Authfail, unknown, disable Broadcast/Multicast/Unknown Unicast rate limit (pps) : 0-1488100 Current MAC Table Entries: {0-32} ACL-IP: The name of the configured IP layer Access Control List ACL-MAC: The name of the configured MAC layer Access Control List Layer 2 Configuration Profile name: Accepted Frame Types: {tagged | untagged | all} Are incoming P-bits trusted: {yes | no} Default assigned Fixed Priority value: {0-7} Transparent LAN Service (TLS): {yes, no} dscpmap: {enable , disable} pbitremap: {enable , disable} maxmac: {0- 32} Ethertype to Pbit mapping: pbit0: string of Ethertypes, pbit1: string of Ethertypes, pbit2: string of Ethertypes, pbit3: string of Ethertypes, pbit4: string of Ethertypes, pbit5: string of Ethertypes, pbit6: string of Ethertypes, pbit7: string of Ethertypes, or or or or or or or or "none" "none" "none" "none" "none" "none" "none" "none" LLDP-MED Profile name: State VoIP Bearer Traffic Tagging Mode VoIP Signaling Traffic Tagging Mode VoIP Bearer Traffic VLAN ID VoIP Signaling Traffic VLAN ID VoIP Bearer Traffic pbit VoIP Signaling Traffic pbit VoIP Bearer Traffic DSCP VoIP Signaling Traffic DSCP TxInterval Page 343 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports If detail is set to verbose, the following information is also shown: Local LLDP Information: Chassis ID Type: Type of ID denoting the local (ONT) chassis. This will be fixed to MACAddress for an ONT (see 802.1AB for details) Chassis ID: Local Chassis ID Port ID Type: Type of ID denoting the local (enet) port. This will be fixed to: InterfaceAlias (see 802.1AB for details) Port ID: Local Port ID Remote (Neighbor) Information: Time Remaining (sec): Number of seconds remaining for which this information is still valid Chassis ID Type: Type of ID denoting the remote MED device. This can be one of one of: {ChassisComponent, InterfaceAlias, PortComponent, MACAddress, NetworkAddress, InterfaceName, local} (see 802.1AB for details) Chassis ID: Chassis ID of the remote neighbor (24 characters, format depends on above type) Port ID Type: Type of ID denoting the remote (MED device) port. This can be one of: {InterfaceAlias, PortComponent, MacAddress, NetworkAddress, InterfaceName, AgentCircuitId, local} (see 802.1AB for details) Port ID: Neighbors Port ID (24 characters, format depends on above type) System Name: Neighbor's System name (25 characters) System Capabilities: List of system capabilities (TIA-1057) System Capabilities Enabled: List of enabled system capabilities (TIA-1057) MED Device Class: (undefined | I | II | III | Network ) Network Policy (Remote): VoIP Bearer Traffic Tagging Mode VoIP Signaling Traffic Tagging Mode VoIP Bearer Traffic VLAN ID VoIP Signaling Traffic VLAN ID VoIP Bearer Traffic pbit VoIP Signaling Traffic pbit VoIP Bearer Traffic DSCP VoIP Signaling Traffic DSCP Inventory (Remote): HW Revision: Neighbor's HW revision (32 Characters) Firmware Revision: Neighbor's Firmware revision (32 Characters) SW Revision: Neighbor's SW revision (32 Characters) Serial No.: Neighbor's Serial Number (32 Characters) Manufacturer Name: Neighbor's Manufacturer Name (32 Characters) Model Name: Neighbor's Model Name (32 Characters) Asset ID: Neighbor's Asset ID (32 Characters) /* end of verbose LLDP section */ **This port information is displayed for ONT ports that support Power over Ethernet** Power over Ethernet state poeconfigname = name of poeconfig profile assigned poe admin state = enable|disable Page 344 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports maxpower (in watts) = 0.2-30.0 Pwr Invalid MPS Fault Consumed Signature Absent Status Status PD Class (in Watts) Counter Counter --------------- ----- ------- -------- ---------------Delivering pwr none 2 6.8 0 3 MoCA Ports use the mocaport profile: ARC: enable, disable ARC Interval: given in minutes, or suppress to indicate that alarms are always suppressed. Only applies if ARC is set to enable. FreqMask: bitmask for the frequency range displayed in hexidecimal (32 bits). Privacy: enable , disable Password: 17 digit password dot1x: enable, disable For MoCA, these individual port states and settings are also displayed: dot1x Authentication: for each supplicant, display the following: Supplicant MAC address: xx-xx-xx-xx-xx-xx State: authed, InProgress, Authfail, unknown, disable Layer 2 Configuration Profile name: Accepted Frame Types: {tagged | untagged | all} Are incoming P-bits trusted: {yes | no} Default assigned Fixed Priority value: {0-7} Transparent LAN Service (TLS): {yes, no} dscpmap: {enable , disable} pbitremap: {enable , disable} Ethertype to Pbit mapping: pbit0: string of Ethertypes, pbit1: string of Ethertypes, pbit2: string of Ethertypes, pbit3: string of Ethertypes, pbit4: string of Ethertypes, pbit5: string of Ethertypes, pbit6: string of Ethertypes, pbit7: string of Ethertypes, or or or or or or or or "none" "none" "none" "none" "none" "none" "none" "none" PwrControl: auto, manual PwrLevel: 1-10 Operating PwrControl: Actual setting is displayed (since some ONTs may not support the provisioned setting) Operating PwrLevel: Actual setting is displayed (since some ONTs may not support the provisioned setting) C.Link MAC Address: The MAC address for the MoCA interface MoCA ports also support the video profile: ARC: enable, disable ARC Interval (minutes): given in minutes AGC Offset (dB): given in dB No. of Analog Channels: m No. of Digital Channels: n Out-of-Range Shutdown Timer: given in hours AGC Offset Capability: supported, unsupported, or n/a (if preprovisioned) Operating AGC Offset (dB): given in dB Page 345 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports High Video RX Power Alarm Threshold: given in dBm Low Video RX Power Alarm Threshold: given in dBm Ont-Override: yes or no HCNA Ports use the hcnaport profile: ARC: enable, disable ARC Interval: given in minutes, or suppress to indicate that alarms are always suppressed. Only applies if ARC is set to enable. dot1x: enable, disable For HCNA, these individual port states and settings are also displayed: dot1x Authentication: for each supplicant, display the following: Supplicant MAC address: xx-xx-xx-xx-xx-xx State: authed, InProgress, Authfail, unknown, disable Broadcast/Multicast/Unknown Unicast rate limit (pps) : 0-1488100 Current MAC Table Entries: {0-32} ACL-IP: The name of the configured IP layer Access Control List ACL-MAC: The name of the configured MAC layer Access Control List Layer 2 Configuration Profile name: Accepted Frame Types: {tagged | untagged | all} Are incoming P-bits trusted: {yes | no} Default assigned Fixed Priority value: {0-7} Transparent LAN Service (TLS): {yes, no} dscpmap: {enable , disable} pbitremap: {enable , disable} maxmac: {0- 32} Ethertype to Pbit mapping: pbit0: string of Ethertypes, pbit1: string of Ethertypes, pbit2: string of Ethertypes, pbit3: string of Ethertypes, pbit4: string of Ethertypes, pbit5: string of Ethertypes, pbit6: string of Ethertypes, pbit7: string of Ethertypes, or or or or or or or or "none" "none" "none" "none" "none" "none" "none" "none" MAC Address: MAC address of the port Frequency Band: Any combination of A B C D CERT State: (enabled | disabled) Master Setting: (Forced | Auto) HPNA version: x (n/a for Pre-prov ONTs) Firmware version: x (n/a for Pre-prov ONTs) HCNA ports also support the video profile: ARC: enable, disable ARC Interval (minutes): given in minutes AGC Offset (dB): given in dB No. of Analog Channels: m No. of Digital Channels: n Out-of-Range Shutdown Timer: given in hours AGC Offset Capability: supported, unsupported, or n/a (if preprovisioned) Operating AGC Offset (dB): given in dB High Video RX Power Alarm Threshold: given in dBm Low Video RX Power Alarm Threshold: given in dBm Ont-Override: yes or no Video ports do not support loopbacks. Page 346 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Video Ports use the videoport profile: ARC: enable, disable ARC Interval (minutes): given in minutes AGC Offset (dB): given in dB No. of Analog Channels: m No. of Digital Channels: n Out-of-Range Shutdown Timer: given in hours AGC Offset Capability: supported or unsupported, or n/a (if preprovisioned) Operating AGC Offset (dB): given in dB High Video RX Power Alarm Threshold: given in dBm Low Video RX Power Alarm Threshold: given in dBm Ont-Override: yes or no VDSL2 Ports use the vdslport profile: ARC: enable, disable ARC Interval (minutes): given in minute dot1x: enable, disable Additionally, these individual VDSL2 port states and settings are displayed: dot1x Authentication: for each supplicant, display the following: Supplicant MAC address: xx-xx-xx-xx-xx-xx State: authed, InProgress, Authfail, unknown, disable ACL-IP: The name of the configured IP layer Access Control List ACL-MAC: The name of the configured MAC layer Access Control List Layer 2 Configuration Profile name: Accepted Frame Types: {tagged | untagged | all} Are incoming P-bits trusted: {yes | no} Default assigned Fixed Priority value: {0-7} Transparent LAN Service (TLS): {yes, no} dscpmap: {enable , disable} pbitremap: {enable , disable} Ethertype to Pbit mapping: pbit0: string of Ethertypes, pbit1: string of Ethertypes, pbit2: string of Ethertypes, pbit3: string of Ethertypes, pbit4: string of Ethertypes, pbit5: string of Ethertypes, pbit6: string of Ethertypes, pbit7: string of Ethertypes, or or or or or or or or "none" "none" "none" "none" "none" "none" "none" "none" Downstream Target SNR Margin: given in dB Downstream Minimum SNR Margin: given in dB Upstream Target SNR Margin: given in dB Upstream Minimum SNR Margin: given in dB Downstream Rate Mode: adaptatinit (not user settable) Upstream Rate Mode: adaptatinit (not user settable) Downstream Maximum Power: (not user settable) Upstream Maximum Power: (not user settable) Downstream PBO Control: auto (not user settable) Upstream PBO Control: auto (not user settable) Channel Channel: slow (not user settable) Downstream Maximum Data Rate: given in kb/s Downstream Minimum Data Rate: given in kb/s Upstream Maximum Data Rate: given in kb/s Page 347 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Upstream Minimum Data Rate: given in kb/s Downstream Maximum Interleave Delay: given in ms Upstream Maximum Interleave Delay: given in ms Downstream INP: value in symbols Upstream INP: value in symbols Note: Any attribute in the port profile that is not supported by the ONT will be ignored. User Privilege Level: Operator Required Parameters: ontportaddr Specifies the ONT port address. It takes the following format: - oltslot-port-channel-ontporttype-index (e.g. au-3-4-16-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - ontporttype (pots, enet, hcna, moca, video, vdsl2, ds1e1) - index (1-n) Optional Parameters: detail summary | verbose Allows the user to specify the level of detail to be returned in the command output Default Values detail = summary Confirmation Message Command completed successfully Example(s) Example 1: (POTS Type Port, tdm-h248 connection) AXS2200> show ont port au-3-1-16-pots-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-pots-1 OLT PON Card: AGPOND Actual ONT Card Type: POTS Page 348 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Member S-VID ----4093 Port Port Port Port Port of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----1 OLT S-VLAN Name -------------------------------vlan-4093 Admin State: enable Loopback State: none Oper State: up Profile Type: potsport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 SignalCode: loopstart Impedance (ohms): 600 Drop Phy Detect (sec): 60 No Grant Detect (sec): 60 Transmit A/D Gain (decibels): -2 Receive D/A Gain (decibels): -4 H248 Oper Status: registered Status: active Packet Period: 20ms Remote IP Address and Port: (xxx.xxx.xxx.xxx:xxxx) Codec Used (Negotiated): G.711 u-law Date and Time of Call: 8/17/2006 16:01:20 Duration of Call: 422 secs Count of RTP packets sent: 3456789 Count of RTP packets received: 12345 Count of RTP packets lost: 713 =============================================================================== Command completed successfully Example 2: (Ethernet Type Port) AXS2200> show ont port au-3-1-16-enet-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-enet-1 OLT PON Card: AGPOND Actual ONT Card Type: 1000BaseT Member S-VID ----400 500 of VLAN(s): C-VID CPE-VID ----- ------101 100 TCONT ----1 1 OLT S-VLAN Name -------------------------------vlan-400 vlan-500 Port Port Port Port Port Admin State: enable Loopback State: none Oper State: up Profile Type: enetport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 dot1x: enable autodetect: auto Actual Rate/Duplex Mode: 1000full dot1x Authentication Supplicant MAC address state ---------------------------00-10-A4-23-19-C0 authed 00-10-A4-23-19-C1 authed Page 349 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps) : 1488100 Current MAC Table Entries: 4 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: enable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none LLDP-MED Profile name: POL21 State: enabled voip-bear-tag: tagged voip-sig-tag: tagged voip-bear-vid: 17 voip-sig-vid: 15 voip-bear-pbit: 6 voip-sig-pbit: 6 voip-bear-dscp: 46 voip-sig-dscp: 46 txinterval: 30 =============================================================================== Command completed successfully Example 3: (Video port) AXS2200> show ont port au-3-1-16-video-1 ============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 22:48:48 ============================================================================== Name: MRCC00000002 SN: MRCC00000002 ONT Channel on the PON: 16 ONT Address: au-3-1-16-video-1 OLT PON Card: AGPOND Actual ONT Card Type: Video Service Member S-VID ----Port Port Port Port Port Page of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----- OLT S-VLAN Name -------------------------------- Admin State: enable Loopback State: none Oper State: Up Profile Type: videoport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 AGC Offset (dB): 0 No. of Analog Channels: 10 No. of Digital Channels: 23 Out-of-Range Shutdown Timer (hours): 48 350 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports AGC Offset Capability: supported Operating AGC Offset (dB): 0 High Video RX Power Alarm Threshold (dBm): 2.0 Low Video RX Power Alarm Threshold (dBm): -8.0 Ont-Override: yes ============================================================================== Command completed successfully Example 4: (Preprovisioned ONT for POTS port) AXS2200> show ont port au-3-1-16-pots-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: pre-prov ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-pots-1 OLT PON Card: AGPOND Actual ONT Card Type: POTS Member S-VID ----4093 Port Port Port Port Port of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----1 OLT S-VLAN Name -------------------------------vlan-4093 Admin State: enable Loopback State: n/a Oper State: unk Profile Type: potsport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 SignalCode: loopstart Impedance (ohms): 600 Drop Phy Detect (sec): 60 No Grant Detect (sec): 60 Transmit A/D Gain (decibels): -2 Receive D/A Gain (decibels): -4 H248 Oper Status: MGnotConfig Status: idle Packet Period: n/a Remote IP Address and Port: n/a Codec Used (Negotiated): n/a Date and Time of Call: n/a Duration of Call: 0 Count of RTP packets sent: 0 Count of RTP packets received: 0 Count of RTP packets lost: 0 Remote party runs/ran RTCP: n/a =============================================================================== Command completed successfully Example 5: (Preprovisioned ONT with Ethernet Port) AXS2200> show ont port au-3-1-16-enet-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: pre-prov Page 351 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-enet-1 OLT PON Card: AGPOND Actual ONT Card Type: 1000Base-T Member S-VID ----150 of VLAN(s): C-VID CPE-VID ----- ------50 - TCONT ----1 OLT S-VLAN Name -------------------------------vlan-150 Port Port Port Port Port Admin State: enable Loopback State: n/a Oper State: unk Profile Type: enetport Profile Name: qbdef ARC: enable ARC Interval(minutes): suppress dot1x: enable Autodetect: auto Actual Rate/Duplex Mode: unk dot1x Authentication Supplicant MAC address state ---------------------------n/a n/a Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps): 1488100 Current MAC Table Entries: 4 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: disable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none LLDP-MED Profile name: POL21 State: enabled voip-bear-tag: tagged voip-sig-tag: tagged voip-bear-vid: 17 voip-sig-vid: 15 voip-bear-pbit: 6 voip-sig-pbit: 6 voip-bear-dscp: 46 voip-sig-dscp: 46 txinterval: 30 =============================================================================== Command completed successfully Example 6: (Preprovisioned ONT with video port) AXS2200> show ont port au-3-1-16-video-1 ============================================================================== ONT PORT REPORT DATE: 03/09/2004 TIME: 22:48:48 ============================================================================== Page 352 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Name: MOCC00000002 SN: pre-prov ONT Channel on the PON: 16 ONT Address: au-3-1-16-video-1 OLT PON Card: AGPOND Actual ONT Card Type: Video Service Member S-VID ----- of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----- OLT S-VLAN Name -------------------------------- Port Port Port Port Port Admin State: disable Loopback State: n/a Oper State: unk Profile Type: videoport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 AGC Offset (dB): 0 No. of Analog Channels: 0 No. of Digital Channels: 0 Out-of-Range Shutdown Timer (hours): 48 AGC Offset Capability: n/a Operating AGC Offset (dB): n/a High Video RX Power Alarm Threshold (dBm): 2.0 Low Video RX Power Alarm Threshold (dBm): -8.0 Ont-Override: no ============================================================================== Command completed successfully Example 7: (VoIP port) AXS2200> show ont port au-3-1-16-pots-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-pots-1 OLT PON Card: AGPOND Actual ONT Card Type: POTS Member S-VID ----12 Port Port Port Port Port Page of VLAN(s): C-VID CPE-VID ----- ------2012 - TCONT ----2 OLT S-VLAN Name -------------------------------- Admin State: enable Loopback State: none Oper State: up Profile Type: potsport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 SignalCode: loopstart Impedance (ohms): 600 Drop Phy Detect (sec): 60 No Grant Detect (sec): 60 Transmit A/D Gain (decibels): -2 Receive D/A Gain (decibels): -4 353 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports VoIP Oper. Status: registered Affected Profile/Event: n/a Server Failure Code Value: n/a Local AoR (userPart): +19789831234 PortSessionType: 3way Call 1 Status: active Call 1 Packet Period: 20ms Call 1 Remote IP Address and Port 1 (xxx.xxx.xxx.xxx:xxxx) Codec Used (Negotiated): G.711 u-law Date and Time of Call: 8/17/2006 16:01:20 Duration of Call: 422 secs Count of RTP packets sent: 3456789 Count of RTP packets received: 12345 Count of RTP packets lost: 713 Remote party runs/ran RTCP: yes Session refresher: local UA Min-SE: 600 seconds Max-SE: 3600 seconds Call 2 Status: active Call 2 Packet Period: 20ms Call 2 Remote IP Address and Port 2 (xxx.xxx.xxx.xxx:xxxx) Codec Used (Negotiated): G.729AB Date and Time of Call: 8/17/2006 16:07:10 Duration of Call: 72 secs Count of RTP packets sent: 3456 Count of RTP packets received: 12345 Count of RTP packets lost: 71 Remote party runs/ran RTCP: yes Session refresher: remote UA Min-SE: 600 seconds Max-SE: 1800 seconds =============================================================================== Command completed successfully Example 8: (MoCA Type Port) AXS2200> show ont port au-3-1-16-moca-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-moca-1 OLT PON Card: AGPOND Actual ONT Card Type: MoCA/Video Member S-VID ----400 MoCA MoCA MoCA MoCA MoCA of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----1 OLT S-VLAN Name -------------------------------vlan-400 Data Admin State: enable RFVideo Admin State: enable Data Oper State: enable RFVideo Oper State: up Port Loopback State: none MoCAPort Profile Type: mocaport Port Profile Name: qbdef ARC: enable Page 354 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports ARC Interval (minutes): suppress FreqMask: 00000100 Privacy: disable Password: dot1x: disable dot1x Authentication Supplicant MAC address state ---------------------------n/a disable l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: enable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none PwrControl: auto PwrLevel: 10 Operating Power Control: manual Operating Power Level: 6 C.Link MAC Address: 00-30-2d-11-22-33 Port Profile Type: videoport Port Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 AGC Offset (dB): 0 No. of Analog Channels: 10 No. of Digital Channels: 23 Out-of-Range Shutdown Timer (hours): 48 AGC Offset Capability: supported Operating AGC Offset (dB): 0 High Video RX Power Alarm Threshold (dBm): 2.0 Low Video RX Power Alarm Threshold (dBm): -8.0 Ont-Override: yes =============================================================================== Command completed successfully Example 9: (VDSL2) AXS2200> show ont port au-5-1-1-vdsl2-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 1 ONT Address (AID): au-5-1-1-vdsl2-1 OLT PON Card: AGPOND Actual ONT Card Type: VDSL2 Member S-VID ----400 Page 355 of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----1 OLT S-VLAN Name -------------------------------vlan-400 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Port Port Port Port Port ONT Provisioning - Ports Admin State: enable Loopback State: none Oper State: up Profile Type: vdslport Profile Name: qbdef ARC: enable ARC Interval(minutes): dot1x: enable suppress dot1x Authentication Supplicant MAC address state ---------------------------00-10-A4-23-19-C0 authed 00-10-A4-23-19-C1 authed Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps): 500 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: enable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none Line Settings: Downstream Target SNR Margin (dB): 6.0 Downstream Minimum SNR Margin (dB): 3.0 Upstream Target SNR Margin (dB): 6.0 Upstream Minimum SNR Margin (dB): 3.0 Downstream Rate Mode: adaptatinit Upstream Rate Mode: adaptatinit Downstream Maximum Power: 14.5 dBm Upstream Maximum Power: 14.5 dBm Downstream PBO Control: auto Upstream PBO Control: auto Channel Settings: Channel: slow Downstream Maximum Data Rate (kb/s): 99968 Downstream Minimum Data Rate (kb/s): 9984 Upstream Maximum Data Rate (kb/s): 49984 Upstream Minimum Data Rate (kb/s): 64 Downstream Maximum Interleave Delay (ms): 8 Upstream Maximum Interleave Delay (ms): 8 Downstream INP: 2 Upstream INP: 2 =============================================================================== Command completed successfully Example 10: (Ethernet Type Port assigned to VLAN 555) AXS2200> show ont port au-3-1-16-enet-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 Page 356 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-enet-1 OLT PON Card: AGPOND Actual ONT Card Type: 1000BaseT Member S-VID ----555 of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----1 OLT S-VLAN Name -------------------------------vlan-555 Port Port Port Port Port Admin State: enable Loopback State: none Oper State: up Profile Type: enetport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 dot1x: enable Autodetect: auto Actual Rate/Duplex Mode: 1000full dot1x Authentication Supplicant MAC address state ---------------------------00-10-A4-23-19-C0 authed 00-10-A4-23-19-C1 authed Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps): 1488100 Current MAC Table Entries: 4 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: enable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none LLDP-MED Profile name: POL21 State: enabled voip-bear-tag: tagged voip-sig-tag: tagged voip-bear-vid: 17 voip-sig-vid: 15 voip-bear-pbit: 6 voip-sig-pbit: 6 voip-bear-dscp: 46 voip-sig-dscp: 46 txinterval: 30 =============================================================================== Command completed successfully Example 11: (HCNA Type Port) AXS2200> show ont port au-3-1-16-hcna-1 Page 357 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports =============================================================================== ONT PORT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-hcna-1 OLT PON Card: AGPOND Actual ONT Card Type: HCNA/Video Member S-VID ----400 HCNA HCNA HCNA HCNA HCNA of VLAN(s): C-VID CPE-VID ----- ------- TCONT ----1 OLT S-VLAN Name -------------------------------vlan-400 Data Admin State: enable RFVideo Admin State: enable Data Oper State: enable RFVideo Oper State: up Port Loopback State: none HCNAPort Profile Type: hcnaport Port Profile Name: qbdef ARC: enable ARC Interval (minutes): suppress dot1x: disable dot1x Authentication Supplicant MAC address state ---------------------------n/a disable Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps): 1488100 Current MAC Table Entries: 4 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: enable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none MAC Address: 00-30-2d-11-22-33 Frequency Band: A CERT State: disabled Master Setting: Auto HPNA version: 3.0 Firmware version: 1.7.4 Port Profile Type: videoport Port Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 AGC Offset (dB): 0 No. of Analog Channels: 10 No. of Digital Channels: 23 Page 358 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Out-of-Range Shutdown Timer (hours): 48 AGC Offset Capability: supported Operating AGC Offset (dB): 0 High Video RX Power Alarm Threshold (dBm): 2.0 Low Video RX Power Alarm Threshold (dBm): -8.0 Ont-Override: yes =============================================================================== Command completed successfully Example 12: (Ethernet Type Port with PoE) AXS2200> show ont port au-3-1-16-enet-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-enet-1 OLT PON Card: AGPOND Actual ONT Card Type: 1000BaseT Member S-VID ----400 500 of VLAN(s): C-VID CPE-VID ----- ------101 100 TCONT ----1 1 OLT S-VLAN Name -------------------------------vlan-400 vlan-500 Port Port Port Port Port Admin State: enable Loopback State: none Oper State: up Profile Type: enetport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 dot1x: enable autodetect: auto Actual Rate/Duplex Mode: 1000full dot1x Authentication Supplicant MAC address state ---------------------------00-10-A4-23-19-C0 authed 00-10-A4-23-19-C1 authed Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps) : 1488100 Current MAC Table Entries: 4 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: enable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none Page 359 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports LLDP-MED Profile name: POL21 State: enabled voip-bear-tag: tagged voip-sig-tag: tagged voip-bear-vid: 17 voip-sig-vid: 15 voip-bear-pbit: 6 voip-sig-pbit: 6 voip-bear-dscp: 46 voip-sig-dscp: 46 txinterval: 30 Power over Ethernet status poeconfigname = voip_port poe admin state = enabled maxpower (in watts) = 7.4 Status --------------Delivering pwr Fault Status ----none PD Class ------2 Pwr Consumed (in Watts) -------6.8 Invalid Signature Counter --------0 MPS Absent Counter --------3 =============================================================================== Command completed successfully Example 13: (Preprovisioned ONT with Ethernet Port supporting PoE) AXS2200> show ont port au-3-1-16-enet-1 =============================================================================== ONT PORT REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: pre-prov ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-enet-1 OLT PON Card: AGPOND Actual ONT Card Type: 1000Base-T Member S-VID ----150 of VLAN(s): C-VID CPE-VID ----- ------50 - TCONT ----1 OLT S-VLAN Name -------------------------------vlan-150 Port Port Port Port Port Admin State: enable Loopback State: n/a Oper State: unk Profile Type: enetport Profile Name: qbdef ARC: enable ARC Interval(minutes): suppress dot1x: enable Autodetect: auto Actual Rate/Duplex Mode: unk dot1x Authentication Supplicant MAC address state ---------------------------n/a n/a Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps): 1488100 Current MAC Table Entries: 4 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no Page 360 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports dscpmap: disable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none LLDP-MED Profile name: POL21 State: enabled voip-bear-vid: 17 voip-sig-vid: 15 voip-bear-pbit: 6 voip-sig-pbit: 6 voip-bear-dscp: 46 voip-sig-dscp: 46 txinterval: 30 Power over Ethernet status poeconfigname = voip_port poe admin state = enabled maxpower (in watts) = 7.4 =============================================================================== Command completed successfully Example 12: (Ethernet Type Port with PoE and LLDP, detail level is verbose) AXS2200> show ont port au-3-1-16-enet-1 detail verbose =============================================================================== ONT PORT REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16-enet-1 OLT PON Card: AGPOND Actual ONT Card Type: 1000BaseT Member S-VID ----400 500 of VLAN(s): C-VID CPE-VID ----- ------101 100 TCONT ----1 1 OLT S-VLAN Name -------------------------------vlan-400 vlan-500 Port Port Port Port Port Admin State: enable Loopback State: none Oper State: up Profile Type: enetport Profile Name: qbdef ARC: disable ARC Interval(minutes): 0 dot1x: enable autodetect: auto Actual Rate/Duplex Mode: 1000full dot1x Authentication Supplicant MAC address state ---------------------------00-10-A4-23-19-C0 authed 00-10-A4-23-19-C1 authed Page 361 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports Broadcast/Unknown Unicast/Unknown Multicast rate limit (pps) : 1488100 Current MAC Table Entries: 4 ACL-IP: qbdef ACL-MAC: qbdef l2config Profile: dataprofile acceptframetypes: all trustpbit: no fixedprio: 1 tls: no dscpmap: enable pbitremap: disable maxmac: 32 Ethertype to Pbit mapping: pbit0: none pbit1: none pbit2: none pbit3: 0x0806 pbit4: ox0800 pbit5: none pbit6: none pbit7: none LLDP-MED Profile name: POL21 State: enabled voip-bear-tag: tagged voip-sig-tag: tagged voip-bear-vid: 17 voip-sig-vid: 15 voip-bear-pbit: 6 voip-sig-pbit: 6 voip-bear-dscp: 46 voip-sig-dscp: 46 txinterval: 30 Local LLDP Information: Chassis ID Type: Chassis ID: Port ID Type: Port ID: MACAddress 08:2a:3f:11:a5:65 InterfaceAlias enet-1 Remote (Neighbor) Information: Time Remaining (sec): Chassis ID Type: Chassis ID: Port ID Type: Port ID: System Name: System Capabilities: System Capabilities Enabled: MED Device Class: Network VoIP VoIP VoIP VoIP VoIP VoIP VoIP VoIP 25 MACAddress b0:c6:9a:63:80:40 local 538 Cisco VoIP Phone Model 5432 Telephone Telephone III Policy (Remote): Bearer Traffic Tagging Mode: Signaling Traffic Tagging Mode: Bearer Traffic VLAN ID: Signaling Traffic VLAN ID: Bearer Traffic pbit: Signaling Traffic pbit: Bearer Traffic DSCP: Signaling Traffic DSCP: Inventory (Remote): HW Revision: SW Revision: Serial No.: Manufacturer Name: Model Name: tagged tagged 45 45 6 6 46 46 4610DR4 R12.2.0.1 07N66213DEW Cisco 7910 Power over Ethernet status poeconfigname = voip_port Page 362 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports poe admin state = enabled maxpower (in watts) = 7.4 Status --------------Delivering pwr Fault Status ----none PD Class ------2 Pwr Consumed (in Watts) -------6.8 Invalid Signature Counter --------0 MPS Absent Counter --------3 =============================================================================== Command completed successfully Error Codes ONT Invalid port Page 363 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports show ont portsummary (ontaddress) Description Shows all the ports provided by the specified ONT. Reported fields include: The report always includes these fields: - ONT Name - ONT Serial Number: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - ONT Channel on the PON - ONT Address (AID) - OLT PON Card Type Port AID: The ONT port address. Ports that are integrated into the main chassis are of the format "porttype-port". Ports that are on cards inserted into the ONT are of the format "slot-port". Actual Card Type: The actual card type for the port. Admin State-LB: The administrative state of the port (enable or disable), and if applicable, the type of active port loopback (-L for line loopback, -P for pon loopback) Oper State: The operating state of the port (up, down, unk for unknown). Profile Type: The type of port profile that applies to the port. Profile Name: The name of the port profile that is configured for the port. For ports connected to an single-tagged VLAN, the VLAN L2config profile is also included. For ports that support Power over Ethernet, the poeconfig profile is also included. For ports that support LLDP-MED, the lldp-med profile is also included. User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (ONT1000GT) AXS2200> show ont portsummary au-3-1-16 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 Page 364 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 pots-3 pots-4 enet-1 enet-1 moca-1 moca-1 moca-1 Actual Card Type ---------------pots pots pots pots gige gige moca/video moca/video moca/video Admin State-LB -------enable enable disable disable enable enable enable enable enable Oper State ----up up down down up up up up up Profile Type ---------potsport potsport potsport potsport enetport l2config mocaport videoport l2config Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 2: (ONT6000GET) AXS2200> show ont portsummary au-3-1-5 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 5 ONT Address (AID): au-3-1-5 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 pots-3 pots-4 pots-5 pots-6 pots-7 pots-8 pots-9 pots-10 pots-11 pots-12 pots-13 pots-14 pots-15 pots-16 pots-17 pots-18 pots-19 pots-20 pots-21 pots-22 pots-23 pots-24 enet-1 enet-1 enet-2 enet-2 Page 365 Actual Card Type ---------------pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots gige gige gige gige Admin State-LB -------enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up up up up up up up up up up up up up up up up up up up up Profile Type ---------potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport enetport l2config enetport l2config Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA enet-3 enet-3 enet-4 enet-4 enet-5 enet-5 enet-6 enet-6 enet-7 enet-7 enet-8 enet-8 enet-9 enet-9 enet-10 enet-10 enet-11 enet-11 enet-12 enet-12 video-1 ONT Provisioning - Ports gige gige gige gige gige gige gige gige gige gige gige gige gige gige gige gige gige gige gige gige video service enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable up up up up up up up up up up up up up up up up up up up up up enetport l2config enetport l2config enetport l2config enetport l2config enetport l2config enetport l2config enetport l2config enetport l2config enetport l2config enetport l2config videoport qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 3: (ONT6000GVT) AXS2200> show ont portsummary au-3-1-5 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 5 ONT Address (AID): au-3-1-5 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 pots-3 pots-4 pots-5 pots-6 pots-7 pots-8 pots-9 pots-10 pots-11 pots-12 pots-13 pots-14 pots-15 pots-16 pots-17 pots-18 pots-19 pots-20 pots-21 pots-22 pots-23 pots-24 vdsl2-1 vdsl2-1 vdsl2-2 Page 366 Actual Card Type ---------------pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots pots vdsl2 vdsl2 vdsl2 Admin State-LB -------enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up up up up up up up up up up up up up up up up up up up Profile Type ---------potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport potsport vdslport l2config vdslport Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA vdsl2-2 vdsl2-3 vdsl2-3 vdsl2-4 vdsl2-4 vdsl2-5 vdsl2-5 vdsl2-6 vdsl2-6 vdsl2-7 vdsl2-7 vdsl2-8 vdsl2-8 vdsl2-9 vdsl2-9 vdsl2-10 vdsl2-10 vdsl2-11 vdsl2-11 vdsl2-12 vdsl2-12 video-1 ONT Provisioning - Ports vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 vdsl2 video service enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable up up up up up up up up up up up up up up up up up up up up up up l2config vdslport l2config vdslport l2config vdslport l2config vdslport l2config vdslport l2config vdslport l2config vdslport l2config vdslport l2config vdslport l2config vdslport l2config videoport qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 4: (ONT1500GT) AXS2200> show ont portsummary au-3-1-5 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 5 ONT Address (AID): au-3-1-5 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 pots-3 pots-4 pots-5 pots-6 pots-7 pots-8 enet-1 enet-1 enet-2 enet-2 moca-1 moca-1 moca-1 Actual Card Type ---------------pots pots pots pots pots pots pots pots gige gige gige gige moca/video moca/video moca/video Admin State-LB -------enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up up up up up up up Profile Type ---------potsport potsport potsport potsport potsport potsport potsport potsport enetport l2config enetport l2config mocaport videoport l2config Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 5: (ONT1500GT connected to single-tagged VLAN on ethernet ports) AXS2200> show ont portsummary au-3-1-5 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 Page 367 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 5 ONT Address (AID): au-3-1-5 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 pots-3 pots-4 pots-5 pots-6 pots-7 pots-8 enet-1 enet-1 enet-2 enet-2 moca-1 moca-1 moca-1 Actual Card Type ---------------pots pots pots pots pots pots pots pots gige gige gige gige moca/video moca/video moca/video Admin State-LB -------enable enable enable enable enable enable enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up up up up up up up Profile Type ---------potsport potsport potsport potsport potsport potsport potsport potsport enetport l2config enetport l2config mocaport videoport l2config Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 6: (ONT1400GT connected to single-tagged VLAN on ethernet ports) AXS2200> show ont portsummary au-3-1-3 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 3 ONT Address (AID): au-3-1-3 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 enet-1 enet-1 enet-2 enet-2 video-1 Actual Card Type ---------------pots pots gige gige gige gige video service Admin State-LB -------enable enable enable enable enable enable enable Oper State ----up up up up up up up Profile Type ---------potsport potsport enetport l2config enetport l2config videoport Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 7: (ONT1420GT connected to single-tagged VLAN on ethernet ports) AXS2200> show ont portsummary au-3-1-6 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Page 368 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Provisioning - Ports ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 enet-1 enet-1 enet-2 enet-2 hcna-1 hcna-1 hcna-1 Actual Card Type ---------------pots pots gige gige gige gige hcna/video hcna/video hcna/video Admin State-LB -------enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up Profile Type ---------potsport potsport enetport l2config enetport l2config hcnaport videoport l2config Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 8: (SF24200 connected to single-tagged VLAN on ethernet ports) AXS2200> show ont portsummary au-3-1-6 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 enet-1 enet-1 enet-2 enet-2 enet-3 enet-3 enet-4 enet-4 Actual Card Type ---------------pots pots gige gige 10/100base-t 10/100base-t 10/100base-t 10/100base-t 10/100base-t 10/100base-t Admin State-LB -------enable enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up up Profile Type ---------potsport potsport enetport l2config enetport l2config enetport l2config enetport l2config Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 9: (SF24210 connected to single-tagged VLAN on ethernet ports) AXS2200> show ont portsummary au-3-1-6 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPONC Port Admin Oper Profile Profile AID Actual Card Type State-LB State Type Name ---------- ---------------- -------- ----- ---------- -------------------- Page 369 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA pots-1 pots-2 enet-1 enet-1 enet-2 enet-2 enet-3 enet-3 enet-4 enet-4 video-1 ONT Provisioning - Ports pots pots gige gige 10/100base-t 10/100base-t 10/100base-t 10/100base-t 10/100base-t 10/100base-t video service enable enable enable enable enable enable enable enable enable enable enable up up up up up up up up up up up potsport potsport enetport l2config enetport l2config enetport l2config enetport l2config videoport qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 10: (SF21000 connected to single-tagged VLAN on ethernet port) AXS2200> show ont portsummary au-3-1-6 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPONC Port AID ---------enet-1 enet-1 Actual Card Type ---------------gige gige Admin State-LB -------enable enable Oper State ----up up Profile Type ---------enetport l2config Profile Name -------------------qbdef qbdef =============================================================================== Command completed successfully Example 11: (WT21004 connected to single-tagged VLAN on ethernet ports; poe enabled on port 1 for powering a voip phone) AXS1800> show ont portsummary au-3-1-6 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2010 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPOND Port AID ---------enet-1 enet-1 enet-1 enet-1 enet-2 enet-2 enet-2 enet-2 enet-3 enet-3 enet-3 Page 370 Actual Card Type ---------------gige gige gige gige gige gige gige gige gige gige gige Admin State-LB -------enable enable enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up up up Profile Type ---------enetport l2config poeconfig lldp-med enetport l2config poeconfig lldp-med enetport l2config poeconfig Profile Name -------------------qbdef qbdef voip_port pol21 qbdef qbdef qbdef qbdef qbdef qbdef qbdef AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA enet-3 enet-4 enet-4 enet-4 enet-4 ONT Provisioning - Ports gige gige gige gige gige enable enable enable enable enable up up up up up lldp-med enetport l2config poeconfig lldp-med qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 12: (WG24200G connected to single-tagged VLAN on ethernet ports) AXS2200> show ont portsummary au-3-1-6 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPONC Port AID ---------pots-1 pots-2 enet-1 enet-1 Actual Card Type ---------------pots pots 10/100base-t 10/100base-t Admin State-LB -------enable enable enable enable Oper State ----up up up up Profile Type ---------potsport potsport enetport l2config Profile Name -------------------qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Example 12: (SB24040 connected to single-tagged VLAN on ethernet ports) AXS2200> show ont portsummary au-3-1-6 =============================================================================== ONT PORTS SUMMARY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 6 ONT Address (AID): au-3-1-6 OLT PON Card: AGPOND Port AID ---------enet-1 enet-2 enet-3 enet-4 ds1e1-1 ds1e1-2 ds1e1-3 ds1e1-4 Actual Card Type ---------------gige gige gige gige c-ds1/e1 c-ds1/e1 c-ds1/e1 c-ds1/e1 Admin State-LB -------enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up Profile Type ---------enetport enetport enetport enetport ds1e1port ds1e1port ds1e1port ds1e1port Profile Name -------------------qbdef qbdef qbdef qbdef qbdef qbdef qbdef qbdef =============================================================================== Command completed successfully Error Codes Invalid ONT ONT does not exist Page 371 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 372 ONT Provisioning - Ports AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Software Management ONT Software Management ontacceptsw (ontaddress) Description This command is used to accept the currently running software on the ONT as the default software version for resets. This command is not allowed during a software download. User Privilege Level: Superuser Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> ontacceptsw au-3-1-16 Command completed successfully Error Codes ONT does not exist ONT has no channel assignment Invalid for pre-provisioned ONTs without serial numbers Invalid ONT equipment state for request ONT already exists in network Page 373 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Software Management ontinstallbootrom ont (ontaddress) version (version-id) Description This command is used to install a particular bootrom release on the Motorola ONT. The bootrom update will be stored in memory at the ONT, until the user initiates an ONT reset. As part of this reset, the bootrom version will be installed. Once the new version is installed, the ONT will automatically reset and start running the new bootrom version. If the bootrom version installation fails, an alarm will be raised. This process may take between 2-6 minutes to complete. User Privilege Level: Superuser Required Parameters: ont ontaddress Specifies the address of the ONT in the format: - oltslot-port-channel (e.g. au-5-1-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. Default Values none Confirmation Message Updating the BOOTROM will affect ONT operation after the ONT is reset Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (update motherboard bootrom) AXS2200> ontinstallbootrom au-3-1-1 version v4.3.0 Updating the BOOTROM will affect ONT operation after the ONT is reset Do you want to continue? y | n >y Command completed successfully Page 374 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Software Management Error Codes ONT does not exist ONT does not support this functionality ONT is in the Emergency Disabled state Invalid for pre-provisioned ONTs without serial numbers Invalid ont type ONT is in wrong state for this request Page 375 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Software Management ontinstallsw (ontaddress) version (version-id) Description This command is used to install a particular software release on the ONT. This will be the backup release, until you perform the "ontacceptsw" command while this is executing on the ONT. This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Superuser Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> ontinstallsw au-3-1-16 version moto2-0 Command completed successfully Error Codes ONT does not exist Invalid for pre-provisioned ONTs without serial numbers ONT has no channel assignment ONT already exists in network Invalid ONT equipment state for request Invalid maxframe setting Page 376 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 377 ONT Software Management AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics ONT Statistics show stats ont pon (ontponaddress) bin ({current | history}) Description Displays the operating values and statistics for the PON port on the ONT. ONT statistics are measured in two bins: - current (running counter since last ONT reset) - history (previous 15 minute interval) The history bin 15-minute intervals are aligned on the hour, and synchronized with the OLT. The report header shows. - ONT Name - ONT Serial Number - ONT port address (AID) - OLT PON Card Type - ONT current operating status The reported operating values are: - ONT-PON Port Oper State (up, down or unknown) - Bin: current or history The reported statistics for GPON are: GEM TCONTs - RX packets - TX packets - RX discarded local MAC packets (discarded due to having a local source MAC address) PLOAM and OMCI - RX PLOAM msgs - TX PLOAM msgs - Errored PLOAM msgs - RX OMCI msgs - TX OMCI msgs - Errored OMCI msgs PHY - LOS errors - LOF errors - Pon Downstream (DS) BIP errors - Pon Upstream (US) BIP errors - Rx Optical Power (for the downstream 1490 nm wavelength in dBm, or n/a if the hardware doesn't support it or the value could not be retrieved) - Tx Optical Power in dBm - Power Feed Voltage in V - Laser Bias Current in milliAmperes - Temperature in degrees Celsius - Estimated ONT range in meters User Privilege Level: Operator Required Parameters: ontponaddress Page 378 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics Specifies the ONT PON port address. It takes the following format:, - oltslot-port-channel-pon-index (e.g. au-3-4-16-pon-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Optional Parameters: bin {current | history} Selects which statistics bin. - current selects the current counter that is still active - history selects the prior interval that has completed Default Values bin=current unless indicated otherwise Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats ont pon au-3-1-16-pon-1 =============================================================================== ONT PON Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 ONT Port Address (AID): au-3-1-16-pon-1 OLT PON Card: AGPONC ONT Operating Status: active Bin: current Port Oper State up GEM TCONTs RX packets 1000 TX packets 999 RX discarded local MAC packets 0 PLOAM and OMCI RX PLOAM msgs 30 TX PLOAM msgs 29 Errored PLOAM msgs 0 RX OMCI msgs 75 TX OMCI msgs 37 Errored OMCI msgs 0 PHY LOS errors 0 LOF errors 0 PON DS BIP errors 0 PON US BIP errors 0 Rx Optical Power (dBm): -18.2 Tx Optical Power (dBm): 1 Power Feed Voltage (V): 5 Laser Bias Current (mA): 6 Temperature (Celsius): 27 Estimated ONT range (m) 1208 =============================================================================== Command completed successfully Page 379 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics Example 2: (some readings were unsuccessful) AXS2200> show stats ont pon au-3-1-16-pon-1 =============================================================================== ONT PON Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 ONT Port Address (AID): au-3-1-16-pon-1 OLT PON Card: AGPONC ONT Operating Status: active Bin: current Port Oper State up GEM TCONTs RX packets 1000 TX packets 999 RX discarded local MAC packets 0 PLOAM and OMCI RX PLOAM msgs 30 TX PLOAM msgs 29 Errored PLOAM msgs 0 RX OMCI msgs 75 TX OMCI msgs 37 Errored OMCI msgs 0 PHY LOS errors 0 LOF errors 0 PON DS BIP errors 0 PON US BIP errors 0 Rx Optical Power (dBm): n/a Tx Optical Power (dBm): n/a Power Feed Voltage (V): 5 Laser Bias Current (mA): n/a Temperature (Celsius): 27 Estimated ONT range (m) 1208 =============================================================================== Command completed successfully Error Codes ONT does not exist ONT has no channel assignment Invalid for pre-provisioned ONTs without serial numbers Invalid ONT equipment state for request ONT does not support this functionality ONT Invalid PON port Page 380 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics show stats ont port (ontportaddr) bin ({current | history}) Description Displays the operating statistics for the ONT port. ONT statistics are measured in two bins: - current (running counter since last ONT reset) - history (previous 15 minute interval) The history bin 15-minute intervals are aligned on the hour, and synchronized with the OLT. The report header shows: - ONT Name - ONT Serial Number - ONT Channel on the PON - ONT Address (AID) - OLT PON Card Type - ONT Operating Status - ONT Port Address - ONT Port Type - Whether the current bin or history bin has been requested. The rest of the report will be tailored to the type of ONT port: - POTS port: Port Admin Status: enable, disable Port Oper Status: up, down Playout Buffer Overflows (octets): Playout Buffer Underflows (octets): ** if in POTS mode (tdm to Class 5 switch) Tx Packet Count Tx Octet Count Rx Packet Count Rx Octet Count Rx Pkt Loss Lost Packet Fraction: {000 to 255} Ratio of RTP packets lost to RTP packets expected for the PM interval. The ratio is multiplied by 256 (the bits are shifted to the left for 8 bit positions) and the resulting integers (8 bit value) are displayed. Active Seconds ** if in VOIP mode (SIP to softswitch) TC Count (Abandoned Calls) (This count shows the Threshold Crossings for abandoned calls per port in VoIP mode. It is 0 if the Abandoned Calls TCA is disabled) C1: Tx Packet Count C1: Tx Octet Count C1: Rx Packet Count C1: Rx Octet Count C1: Rx Pkt Loss C1: Lost Packet Fraction: {000 to 255} Ratio of RTP packets lost to RTP packets expected for the PM interval. The ratio is multiplied by 256 (the bits are shifted to the left for 8 bit positions) and the resulting integers (8 bit value) are displayed. C1: RTP Packets Discarded (Errors) C1: RTP Packets Discarded (buffer over-runs) C1: RTP packets Discarded (buffer under-runs) Page 381 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA C1: C1: C1: C1: ONT Statistics Avg. Jitter Buffer Depth (bytes) Avg. RTP Stream Jitter (msec) Peak RTP Stream Jitter (msec) Active Seconds: n The second leg is visible only in a 3-way call using SIP to a softswitch. A 3-way call using H.248 to the voice gateway appears as a 2-way call to the ONT. If the VoIP-SIP port had at least one 3-way call during the PM interval, the sum of all counts for the second leg within the interval will be shown as Call2 (C2). C2: C2: C2: C2: C2: C2: C2: C2: C2: C2: C2: C2: C2: Tx Packet Count Tx Octet Count Rx Packet Count Rx Octet Count Rx Pkt Loss Lost Packet Fraction RTP Packets Discarded (Errors) RTP Packets Discarded (buffer over-runs) RTP packets Discarded (buffer under-runs) Avg. Jitter Buffer Depth (bytes) Avg. RTP Stream Jitter (msec) Peak RTP Stream Jitter (msec) Active Seconds: n - Ethernet port: The following statistics will be shown: Port Admin Status: enable, disable Port Oper Status: up, down Loop Detection Far End Port: the source port address for the last received loopback test message, none (if there is no loop detected), or na (if the ONT does not support the capability to detect a loop) Interface Monitoring In Octets In Ucast Pkts In Discards (does not include Errored/Undersized/Oversized Frames) In Errors In Multicast Pkts In Broadcast Pkts Out Octets Out Ucast Pkts Out Discards Out Errors Out Multicast Pkts Out Broadcast Pkts Ethernet History In FCS Errors Excessive Collisions Late Collisions In Frame Too Longs (Note: for ONTs with the BCM 53115 chipset (1420GT, 1120GE, the standard frame size is 2,000 bytes, therefore this counter will only increment at frames > 1,997 due to the 3 byte CRC) Rx Buffer Overflows Out Single Collisions Out Multiple Collisions Deferred Transmission Counter Page 382 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics Internal MAC Tx Errors Carrier Sense Errors (Note that carrier sense errors on the SF family of ONTs require upstream traffic to have been active before such a failure condition could be reported) In Frame Alignment Errors Internal MAC Rx Error Counter Rx Pause Frames Tx Pause Frames LLDP RxPackets TxPackets RxDiscards RxUnknownTLVs Received LLDP Packets Sent LLDP Packets Discarded LLDP Packets Unknown TLVs received Ethernet port flapping alarms Cumulative Alarms Ethernet Carrier Loss Issued Ethernet Carrier Loss Suppressed - RF Video port: Port Admin Status: enable, disable Port Oper Status: up, down For downstream traffic: Rx Optical Power Level for the 1550 nm overlay wavelength, in dBuW (followed by same measurement in dBm). Note: X (dBm) = Y (dBuW) - 30 Tx RF Level in dBuV (followed by the same measurement in dBmV), or unknown if the ONT doesn't support the ability to measure the RF output power. Note: X (dBmV) = Y (dBuV) - 60 Calculated Tx RF level / Analog Ch (dbmV): Calculated Tx RF level / Digital Ch (dbmV): RF Video port flapping alarms Cumulative Alarms OPTVIDPWR-LOS Issued OPTVIDPWR-LOS Suppressed OPTVIDPWR-LOW Issued OPTVIDPWR-LOW Suppressed OPTVIDPWR-HIGH Issued OPTVIDPWR-HIGH Suppressed For return path traffic on the same GPON as the ONT, the following operational values will be shown: Video RPD Statistics Rx Total Packets: 0 Rx Good Packets: 0 Rx Missed Packets: 0 Min Rx Power (since last ONT reset, in dBmV): 0 Max Rx Power (since last ONT reset, in dBmV): 0 Rx power (for the last received packet, in dBmV): 0 - MoCA port: Note: History bins are not supported for MoCA ports. Current values are always reported regardless of whether the current or history bin is requested. Port Admin Status: enable, disable Page 383 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics Port Oper Status: up, down IP Data Statistics (4 bytes) Incoming = From the LAN Incoming Unicast Packets Incoming Discarded Packets Incoming Error Packets Incoming Unknown Packets Incoming Multicast Packets Incoming Broadcast Packets Incoming Octets Outgoing = from the WAN Outgoing Unicast Packets Outgoing Discarded Packets Outgoing Error Packets Outgoing Multicast Packets Outgoing Broadcast Packets Outgoing Octets MoCA Statistics Local ONT MoCA Interface MAC address: Network Status: {notJoined, joined, joinedandNetCoord Link Uptime: HH:MM:SS Link Reset Count: counter value Link Reset History: 4 byte hexidecimal value (read right to left for previous last 4 link reset debug codes) For each remote node on the C.Link (Up to 16 nodes maximum per C.Link network): Remote Node-ID: The MAC address of the remote MoCA node PHY TX rate: MoCA PHY transmit rate from the ONT MoCA interface to the remote node identified by Node-ID. PHY RX rate: MoCA PHY receive rate at the ONT MoCA interface from the remote node identified by Node-ID. RX Packet: Number of received packets from the remote node. (4 bytes) RX Errored: Number of received errored packets from the remote node. (4 bytes) Video Statistics Port Admin Status: enable, disable Port Oper Status: up, down Rx Optical Power Level for the 1550 nm overlay wavelength, in dBuW (followed by same measurement in dBm). Note: X (dBm) = Y (dBuW) - 30 Tx RF Level in dBuV (followed by the same measurement in dBmV), or unknown if the ONT doesn't support the ability to measure the RF output power. Calculated Tx RF level / Analog Ch (dbmV): Calculated Tx RF level / Digital Ch (dbmV): Note: X (dBmV) = Y (dBuV) - 60 MoCA port flapping alarms Cumulative Alarms MoCA low bandwidth Suppressed MoCA Loss of Signal (LOS) Issued MoCA Loss of Signal (LOS) Suppressed - HCNA port: Port Admin Status: enable, disable Port Oper Status: up, down Interface Monitoring Page 384 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Rx Rx Rx Rx Rx Rx Rx Tx Tx Tx Tx Tx Tx ONT Statistics Unicast Packets Number of total received unicast packets Octets Number of total (bad/good) received bytes Broadcast Packets Number of received broadcast packets Multicast Packets Number of received multicast packets Errors Number of received packets with errors Undersized Packets Number of received undersized packets Discarded Packets Number of rx packets discarded due to lack of resources Unicast Packets Number of total transmitted unicast packets Octets Number of total (bad/good) transmitted bytes Broadcast Packets Number of transmitted broadcast packets Multicast Packets Number of transmitted multicast packets Undersized Packets Number of undersized packets sent Discarded Packets Number of packets from host discarded due to lack of resources Video Statistics Port Admin Status: enable, disable Port Oper Status: up, down Rx Optical Power Level for the 1550 nm overlay wavelength, in dBuW (followed by same measurement in dBm). Note: X (dBm) = Y (dBuW) - 30 Tx RF Level in dBuV (followed by the same measurement in dBmV), or unknown if the ONT doesn't support the ability to measure the RF output power. Calculated Tx RF level / Analog Ch (dbmV): Calculated Tx RF level / Digital Ch (dbmV): Note: X (dBmV) = Y (dBuV) - 60 - VDSL2 port: The following statistics will be shown: Port Admin Status: enable, disable Port Oper Status: up, down Line Operating State: sync, no-sync, unknown Interface Monitoring In Octets In Ucast Pkts In Discards In Errors In Unknown Protos In Multicast Pkts In Broadcast Pkts Out Octets Out Ucast Pkts Out Discards Out Errors Out Multicast Pkts Out Broadcast Pkts The following parameters are reported for both downstream and upstream: Minimum INP (number of symbols) Current INP (number of symbols) Max Interleave Delay (ms) Current Interleave Delay (ms) Provisioned Rate (kb/s) Current Rate (kb/s) Max Attainable Rate (kb/s) Target SNR Margin (dB): 0 - +31.0, in steps of 0.1 dB Min SNR Margin (dB): 0 - +31.0, in steps of 0.1 dB Page 385 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics Band 1- Current SNR Margin (dB): 0 - +31.0, in steps of 0.1 dB Band 2- Current SNR Margin (dB): 0 - +31.0, in steps of 0.1 dB Band 3- Current SNR Margin (dB): 0 - +31.0, in steps of 0.1 dB Band 1- Line Attenuation (dB): 0 - +127.0, in steps of 0.1 dB Band 2- Line Attenuation (dB): 0 - +127.0, in steps of 0.1 dB Band 3- Line Attenuation (dB): 0 - +127.0, in steps of 0.1 dB Band 1- Signal Attenuation (dB): 0 - +127.0, in steps of 0.1 dB Band 2- Signal Attenuation (dB): 0 - +127.0, in steps of 0.1 dB Band 3- Signal Attenuation (dB): 0 - +127.0, in steps of 0.1 dB Max Output Power (dBm): 0.0 - +25.5 dBm, in steps of 0.1 dBm, or out of range Output Power (dBm): -31.0 - +31.0 dBm, in steps of 0.1 dBm, or out of range The following parameters are available for the downstream side only Status NoDefect: yes, no LOF: yes,no LOS: yes,no LOP: yes,no LOL: yes,no Data Init Fail: yes,no Conf Init Fail: yes,no Proto Init Fail: yes,no No Peer VTU: yes,no Bin: Current or history LOSS-L: loss of signal seconds - line, local LOFS-L: loss of framing seconds - line, local ES-L: errored seconds - line, local FECS-L: forward error corrections - line, local Line Inits: line initialization counts, local Link Retrain Errors: link retrain error counts, local CV-C: code violations - channel, local LOSS-LFE: loss of signal seconds - line, far end LOFS-LFE: loss of framing seconds - line, far end ES-LFE: errored seconds - line, far end FECS-LFE: forward error corrections - line, far end CV-CFE: code violations - channel, far end The following counters are associated with flapping alarms condition. VDSL2 port flapping alarms Cumulative Alarms VTU-O Loss of Frame Issued VTU-O Loss of Frame Suppressed VTU-O Loss of Signal Issued VTU-O Loss of Signal Suppressed VTU-O Loss of Power Issued VTU-O Loss of Power Suppressed -DS1/E1 port: Port Admin Status: enable, disable Port Oper Status: up, down Pseudowire statistics: - TX Pkts - RX Pkts - Missing Pkts - Misordered Pkts (Usable) - Misordered Pkts (Dropped) - Buffer overrun/underrun - Stray Pkts Page 386 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics - Malformed Pkts - Remote Pkt Loss - Invalid Pkts Tx'ed Min, Max and Avg Jitter Buffer Size - Errored Seconds - Severely errored Seconds - Unavailable Seconds This command is not allowed during a software download or when the ONT is operating on battery backup. User Privilege Level: Operator Required Parameters: ontportaddr Specifies the ONT port address. It takes the following format: - oltslot-port-channel-ontporttype-index (e.g. au-3-4-16-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - ontporttype (pots, enet, hcna, moca, video, vdsl2, ds1e1) - index (1-n) Optional Parameters: bin {current | history} Selects which statistics bin. - current selects the current counter that is still active - history selects the prior interval that has completed Default Values bin=current unless specified otherwise Confirmation Message Command completed successfully Example(s) Example 1: (POTS tdm mode) AXS2200> show stats ont port au-3-1-16-pots-1 bin current =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: Page 387 alpha AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics SN: MRCC12345678 Channel: 16 ONT Address (AID): au-3-1-16-pots-1 OLT PON Card: AGPONC ONT Operating Status: active ONT Port: pots-1 ONT Port Type: POTS Bin: current Port Admin Status: enable Port Oper Status: up Playout Buffer Overflow (octets): Playout Buffer Underflow (octets): 0 0 Tx Packet Count: 33 Tx Octet Count: 488 Rx Packet Count: 2679 Rx Octet Count: 88407 Rx Pkt Loss: 20 Lost Packet Fraction: 007 Active seconds: 422 =============================================================================== Command completed successfully Example 2: (VOIP SIP mode) AXS2200> show stats ont port au-3-1-16-pots-1 bin history =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 16 ONT Address (AID): au-3-1-16-pots-1 OLT PON Card: AGPONC ONT Operating Status: active ONT Port: pots-1 ONT Port Type: VOIP Bin: history POTS Port Admin Status: enable POTS Port Oper Status: up Playout Buffer Overflow (octets): Playout Buffer Underflow (octets): TC Count (Abandoned Calls): Page 0 0 0 C1: C1: C1: C1: C1: C1: C1: C1: C1: C1: C1: C1: C1: Tx Packet Count: 33 Tx Octet Count: Rx Packet Count: 2679 Rx Octet Count: Rx Pkt Loss: Lost Packet Fraction: RTP Pkts Discarded (Errors): RTP Pkts Discarded (buffer over-runs): RTP Pkts Discarded (buffer under-runs): Avg. Jitter Buffer Depth (bytes): Avg. RTP Stream Jitter (msec): Peak RTP Stream Jitter (msec): Active seconds: C2: C2: C2: C2: Tx Tx Rx Rx 388 Packet Count: Octet Count: Packet Count: Octet Count: 20 4532 488 88407 20 007 56 0 0 45 5 26 422 540 122364 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics C2: C2: C2: C2: C2: C2: C2: C2: C2: Rx Pkt Loss: 67 Lost Packet Fraction: 015 RTP Pkts Discarded (Errors): 56 RTP Pkts Discarded (buffer over-runs): 0 RTP Pkts Discarded (buffer under-runs): 0 Avg. Jitter Buffer Depth (bytes): 45 Avg. RTP Stream Jitter (msec): 5 Peak RTP Stream Jitter (msec): 26 Active Seconds: 72 =============================================================================== Command completed successfully Example 3: (Ethernet) AXS2200> show stats ont port au-3-1-16-enet-1 bin current =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 16 ONT Address (AID): au-3-1-16-enet-1 OLT PON Card: AGPONC ONT Operating Status: active ONT Port: enet-1 ONT Port Type: Ethernet Bin: current Port Admin Status: enable Port Oper Status: up Loop Detection Far End Port: none Interface Monitoring In Octets: 9872947 In Ucast Pkts: 3678 In Discards: 0 In Errors: 0 In Multicast Pkts: 0 In Broadcast Pkts: 279 Out Octets: 7984798 Out Ucast Pkts: 983 Out Discards: 0 Out Errors: 0 Out Multicast Pkts: 0 Out Broadcast Pkts: 0 Ethernet History FCS Errors: 0 Excessive Collision Counter: 0 Late Collision Counter: 0 Frame Too Long: 0 Buffer Overflows on Receive: 0 Single Collision Frame Counter: 0 Multiple Collisions Frame Counter: 0 Deferred Transmission Counter: 0 Internal MAC Transmit Error Counter: 0 Carrier Sense Errors: 0 Frame Alignment Error Counter: 0 Internal MAC Receive Error Counter: 0 Rx Pause Frames: 0 Tx Pause Frames: 0 LLDP RxPackets: TxPackets: RxDiscards: RxUnknownTLVs: Page 389 456 56 0 0 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics =============================================================================== Command completed successfully Example 4: (MoCA Port) AXS2200> show stats au-5-1-1-moca-1 =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 16 ONT Address (AID): au-3-1-16-moca-1 OLT PON Card: AGPONC ONT Operating Status: active ONT Port: moca-1 ONT Port Type: MoCA Bin: current Port Admin Status: enable Port Oper Status: up IP Statistics Rx Unicast Packets: 0 Rx Discarded Packets: 0 Rx Error Packets: 0 Rx Unknown Packets: 0 Rx Multicast Packets: 0 Rx Broadcast Packets: 0 Rx Octets: 0 Tx Unicast Packets: 0 Tx Discarded Packets: 0 Tx Error Packet Tx Multicast Packets: 0 Tx Broadcast Packets: 0 Tx Octets: 0 MoCA Statistics Local ONT MoCA interface MAC Address: Network Status: joined Link Uptime (HH:MM:SS): 25:45:02 Link Reset Count: 2 Link Reset History: 0x70707070 C.Link Network Mbps Mpbs Remote Node-ID TX Rate RX Rate ----------------- ------- ------00:0f:b3:c0:3c:27 244 235 00:16:b5:86:d7:a9 Rx Packets ---------0 Rx Errored Packets -----------------0 Video Statistics Port Admin Status: enable Port Oper Status: up Downstream (Rx from OLT): Rx Optical Power Level: 20 dBuW (-10 dBm) Tx RF Level: 60 dBuV (0 dBmV) Calculated Tx RF level / Analog Ch (dbmV): Calculated Tx RF level / Digital Ch (dbmV): =============================================================================== Command completed successfully Example 5: (RF video with VRPD enabled) AXS2200> show stats ont port au-3-1-16-video-1 bin current =============================================================================== ONT Port Statistics Page 390 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 16 ONT Address (AID): au-3-1-16-video-1 OLT PON Card: AGPONC ONT Operating Status: active ONT Port: video-1 ONT Port Type: Video Bin: current Port Admin Status: enable Port Oper Status: up Downstream (Rx from OLT): Rx Optical Power Level: 20 dBuW (-10 dBm) Tx RF Level: 60 dBuV (0 dBmV) Calculated Tx RF level / Analog Ch (dbmV): Calculated Tx RF level / Digital Ch (dbmV): Upstream (Tx to OLT): Rx Total Packets: 2389 Rx Good Packets: 2365 Rx Missed Packets: 24 Min Rx Power (since last ONT reset, in dBmV): 0 Max Rx Power (since last ONT reset, in dBmV): 0 Rx power (for the last received packet, in dBmV): 0 =============================================================================== Command completed successfully Example 6: (VDSL2) AXS2200> show stats ont port au-5-1-1-vdsl2-1 =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 1 ONT Address (AID): au-5-1-1-vdsl2-1 OLT PON Card: AGPONC ONT Operating Status: in_service ONT Port: vdsl2-1 ONT Port Type: VDSL2 Port Admin Status: enable Port Oper Status: up Line Operating State: sync Interface Monitoring In Octets: 9872947 In Ucast Pkts: 3678 In Discards: 0 In Errors: 0 In Unknown Protos: 0 In Multicast Pkts: 0 In Broadcast Pkts: 279 Out Octets: 7984798 Out Ucast Pkts: 983 Out Discards: 0 Out Errors: 0 Out Multicast Pkts: 0 Out Broadcast Pkts: 0 Parameter --------------------------------- Page 391 Downstream --------------- Upstream --------------- AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics Minimum INP Current INP Max Interleave Delay (ms) Current Interleave Delay (ms) Provisioned Rate (kb/s) Current Rate (kb/s) Max Attainable Rate (kb/s) Target SNR Margin (dB): Min SNR Margin (dB): Band 1-Current SNR Margin (dB): Band 2-Current SNR Margin (dB): Band 3-Current SNR Margin (dB): Band 1-Line Attenuation (dB): Band 2-Line Attenuation (dB): Band 3-Line Attenuation (dB): Band 1-Signal Attenuation (dB): Band 2-Signal Attenuation (dB): Band 3-Signal Attenuation (dB): Max Output Power (dBm): Output Power (dBm): 2 4.5 16 8 80000 80000 100000 +6.0 +3.0 +4.2 +4.2 +4.2 30.0 30.0 30.0 30.0 30.0 30.0 14.5 8.1 2 4.5 8 8 40000 40000 100000 +6.0 +3.0 +4.5 +4.5 +4.5 28.5 28.5 28.5 28.5 28.5 28.5 14.5 8.3 VTU-O Status NoDefect: yes LOF: no LOS: no LOP: no LOL: no Data Init Fail: no Conf Init Fail: no Proto Init Fail: no No Peer VTU: no Bin: Current LOSS-L: 0 LOFS-L: 0 ES-L: 3 FECS-L: 2 Line Inits: 0 Link Retrain Errors: CV-C: 2 LOSS-LFE: 0 LOFS-LFE: 0 ES-LFE: 0 FECS-LFE: 0 CV-CFE: 0 0 =============================================================================== Command completed successfully Example 7: (RF video without upstream VRPD) AXS2200> show stats ont port au-3-1-16-video-1 bin current =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 16 ONT Address (AID): au-3-1-16-video-1 OLT PON Card: AGPONC ONT Operating Status: active ONT Port: video-1 ONT Port Type: Video Bin: current Port Admin Status: enable Port Oper Status: up Page 392 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics Downstream (Rx from OLT): Rx Optical Power Level: 20 dBuW (-10 dBm) Tx RF Level: 60 dBuV (0 dBmV) Calculated Tx RF level / Analog Ch (dbmV): Calculated Tx RF level / Digital Ch (dbmV): =============================================================================== Command completed successfully Example 7: (VDSL2, no connection defined to the ONT port; VDSL2 link synchronized) AXS2200> show stats ont port au-5-1-1-vdsl2-1 =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 1 ONT Address (AID): au-5-1-1-vdsl2-1 OLT PON Card: AGPONC ONT Operating Status: in_service ONT Port: vdsl2-1 ONT Port Type: VDSL2 Port Admin Status: enable Port Oper Status: up Line Operating State: sync Interface Monitoring In Octets: 0 In Ucast Pkts: 0 In Discards: 0 In Errors: 0 In Unknown Protos: 0 In Multicast Pkts: 0 In Broadcast Pkts: 0 Out Octets: 0 Out Ucast Pkts: 0 Out Discards: 0 Out Errors: 0 Out Multicast Pkts: 0 Out Broadcast Pkts: 0 Parameter --------------------------------Minimum INP Current INP Max Interleave Delay (ms) Current Interleave Delay (ms) Provisioned Rate (kb/s) Current Rate (kb/s) Max Attainable Rate (kb/s) Target SNR Margin (dB): Min SNR Margin (dB): Band 1-Current SNR Margin (dB): Band 2-Current SNR Margin (dB): Band 3-Current SNR Margin (dB): Band 1-Line Attenuation (dB): Band 2-Line Attenuation (dB): Band 3-Line Attenuation (dB): Band 1-Signal Attenuation (dB): Band 2-Signal Attenuation (dB): Band 3-Signal Attenuation (dB): Max Output Power (dBm): Output Power (dBm): Downstream --------------2 4.5 16 8 80000 80000 100000 +6.0 +3.0 +4.2 +4.2 +4.2 30.0 30.0 30.0 30.0 30.0 30.0 14.5 8.1 Upstream --------------2 4.5 8 8 40000 40000 100000 +6.0 +3.0 +4.5 +4.5 +4.5 28.5 28.5 28.5 28.5 28.5 28.5 14.5 8.3 VTU-O Status NoDefect: yes Page 393 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics LOF: no LOS: no LOP: no LOL: no Data Init Fail: no Conf Init Fail: no Proto Init Fail: no No Peer VTU: no Bin: Current LOSS-L: 0 LOFS-L: 0 ES-L: 3 FECS-L: 2 Line Inits: 0 Link Retrain Errors: CV-C: 2 LOSS-LFE: 0 LOFS-LFE: 0 ES-LFE: 0 FECS-LFE: 0 CV-CFE: 0 0 =============================================================================== Command completed successfully Example 8: (HCNA Port) AXS2200> show stats au-5-1-1-hcna-1 =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 16 ONT Address (AID): au-3-1-16-hcna-1 OLT PON Card: AGPONC ONT Operating Status: active ONT Port: hcna-1 ONT Port Type: HCNA Bin: current Port Admin Status: enable Port Oper Status: up IP Statistics Rx Unicast Packets: Rx Octets: Rx Broadcast Packets: Rx Multicast Packets: Rx Errors: Rx Discarded Packets: Rx Undersized Packets: Tx Tx Tx Tx Tx Tx Unicast Packets: Octets: Broadcast Packets: Multicast Packets: Undersized Packets: Discarded Packets: 0 0 0 0 0 0 0 0 0 0 0 0 0 Video Statistics Port Admin Status: enable Port Oper Status: up Downstream (Rx from OLT): Rx Optical Power Level: 20 dBuW (-10 dBm) Tx RF Level: 60 dBuV (0 dBmV) Calculated Tx RF level / Analog Ch (dbmV): Calculated Tx RF level / Digital Ch (dbmV): Page 394 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics =============================================================================== Command completed successfully Example 9: (DS1/E1 port) AXS2200> show stats ont port au-14-1-1-ds1e1-1 =============================================================================== ONT Port Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 1 ONT Address (AID): au-14-1-1-ds1e1-1 OLT PON Card: AGPOND ONT Operating Status: active ONT Port: ds1e1-1 ONT Port Type: DS1/E1 Bin: current Port Admin Status: enable, disable Port Oper Status: up, down Pseudowire statistics: TX Pkts: 2389 RX Pkts: 2365 Missing Pkts: 0 Misordered Pkts (Usable): 0 Misordered Pkts (Dropped): 0 Buffer overrun/underrun: 0 Stray Pkts: 0 Malformed Pkts: 0 Remote Pkt Loss: 0 Invalid Pkts Tx'ed: 0 Jitter Buffer Size: Min (125-us) ----------0 Max (125-us) ----------48 Avg (125-us) ----------10 Errored Seconds: 0 Severely errored Seconds: 0 Unavailable Seconds: 0 Error Codes ONT Invalid port Invalid ONT equipment state for request Invalid for pre-provisioned ONTs without serial numbers Page 395 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics show stats ont sip (ontaddress) Description Provides the following statistics for the SIP User Agent at the ONT identified by <ontaddress> : The report header shows: - ONT Name - ONT Serial Number - ONT Address (AID) - OLT PON Card Type - ONT Operating Status The body of the report shows: Rx Invites Received INVITES Rx Invite Retrans Received INVITE Retransmissions Rx Non-invites Received Non-INVITE Requests Rx Non-invites Retrans Received Non-INVITE Requests Retransmissions Rx Responses Received Responses Rx Response Retrans Received Response Retransmissions Rx Ack Received Acknowledgements Rx Bye Received BYE Messages Rx Register Received Register Messages Rx Subscribe Received Subscribe Messages Rx Refer Received Refer Messages Rx Notify Received Notify Messages Rx Prack Received Provisional Acknowledgements Rx Cancel Received Cancel Messages Tx Invites Sent INVITES Tx Invite Retrans Sent INVITE Retransmissions Tx Non-invites Sent Non-INVITE Requests Tx Non-invite Retrans Sent Non-INVITE Requests Retransmissions Tx Responses Sent Responses Tx Response Retrans Sent Response Retransmissions Tx Ack Sent Acknowledgements Tx Bye Sent BYE Messages Tx Register Sent Register Messages Tx Subscribe Sent Subscribe Messages Tx Refer Sent Refer Messages Tx Notify Sent Notify Messages Tx Prack Sent Provisional Acknowledgements Tx Cancel Sent Cancel Messages Below threshold crossing counters are zero if the respective TCA has been disabled: SIP Message Timeout TC Count - Number of crossings for the SIP Message Timeout TCA RTP Jitter TC Count - Number of crossings for the RTP Jitter TCA Packet Loss Fraction TC Count - Number of crossings for the Packet Loss Fraction TCA User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) Page 396 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Statistics - channel (the ONT channel on the PON) Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats ont sip au-3-1-16 =============================================================================== ONT SIP Stats DATE: 07/31/2005 TIME: 07:14:40 =============================================================================== Name: alpha SN: MRCC12345678 ONT Address (AID): au-3-1-16 OLT PON Card: ABPONA ONT Operating Status: in_service Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Invites: 54 Invite Retrans: 8 Non-invites: 23 Non-invites Retrans: 2 Responses: 1000 Response Retrans: 39 Ack: 0 Bye: 0 Register: 0 Subscribe: 0 Refer: 0 Notify: 10 Prack: 0 Cancel: 0 Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx Tx Invites: 456 Invite Retrans: 35 Non-invites: 78 Non-invite Retrans: 11 Responses: 77 Response Retrans 3 Ack: 0 Bye: 0 Register: 0 Subscribe: 3 Refer: 0 Notify: 15 Prack: 0 Cancel: 0 SIP Message Timeout TC Count: RTP Jitter TC Count: Packet Loss Fraction TC Count: 0 0 0 =============================================================================== Command completed successfully Error Codes Invalid ONT equipment state for request Invalid ONT VOIP is not configured or supported on ONT Page 397 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 398 ONT Statistics AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests ONT Tests show testresult loop (ontpotsaddress) Description Displays the analog measurements for the last time the Metallic Loop Test was performed on the POTS port. Displayed information includes: AID Timestamp: Date and time that the test was last perfomed on this POTS port. Tip-Gnd VAC (rms): Tip to Ground AC Voltage (rms). Used to determine if Hazardous Potential condition exists or if Absolute Voltage is in range. The ONT measures up to 50 V (rms). Ring-Gnd VAC (rms): Ring to Ground AC Voltage (rms). Used to determine if Hazardous Potential condition exists or if Absolute Voltage is in range. The ONT measures up to 50 V (rms). Tip-Gnd VDC: Tip to Ground DC voltage. Used to determine if Hazardous Potential condition exists or if Absolute Voltage is in range. The ONT measures up to -80 V. Ring-Gnd VDC: Ring to Ground DC voltage. Used to determine if Hazardous Potential condition exists or if Absolute Voltage is in range. The ONT measures up to -80 V. Tip-Gnd DC Resistance (Kohms): Tip to Ground DC resistance in kilo-ohms. Used to determine if a resistive fault condition exists. Ring-Gnd DC Resistance (Kohms): Ring to Ground DC resistance in kilo-ohms. Used to determine if a resistive fault condition exists. Tip-Ring DC Resistance (Kohms): Tip to Ring DC resistance in kilo-ohms. Used to determine if a resistive fault condition exists. REN Count: Used to determine if the Ringers Test passes or fails by measuring the equivalent ringer count across tip and ring User Privilege Level: Operator Required Parameters: loop ontpotsaddress Identifies the POTS port address. Valid values are: - slot-port-ontaid-pots-index, for integrated POTS ports. Example: au-5-1-1-pots-1 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show testresult loop au-5-1-1-pots-1 =============================================================================== LOOP TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== AID: au-5-1-1-pots-1 Page 399 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests Timestamp: 5/19/05 12:02:00 Tip-Gnd VAC (rms): 20 Ring-Gnd VAC (rms): 10 Tip-Gnd VDC: -49 Ring-Gnd VDC: -48 Tip-Gnd DC Resistance (Kohms): 50 Ring-Gnd DC Resistance (Kohms): 50 Tip-Ring DC Resistance (Kohms): 50 REN Count: 1.5 =============================================================================== Command completed successfully Error Codes Invalid port Page 400 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests show testresult sip-dialtone (ontpotsaddress) Description Displays the test results gathered from the last time the SIP Pull/Break Dialtone Test was performed on the POTS port. Information displayed includes: AID: pots port AID Destination Phone Number: Timestamp: Last perfomed on this POTS port. {mm/dd/yyyy hh:mm:ss} or N/A Dialtone verified: {OK, timed out, not executed} Next-hop connection time: {XXX milliseconds, timed out, not executed} Post Dialtone Delay: {XXX milliseconds, timed out, not executed} Ringback tone verified: {OK, timed out, not executed} Media negotiation: {XXX milliseconds, timed out, not executed} Media path connectivity: {OK, timed out, not executed} User Privilege Level: Operator Required Parameters: ontpotsaddress Indicates the ONT POTS address: - For integrated ONTs: oltslot-port-channel-pots-index (eg. au-3-1-16-pots-1) Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show testresult sip-dialtone au-5-1-1-pots-1 =============================================================================== SIP-DIALTONE TEST RESULT REPORT DATE: 06/17/2007 TIME: 16:08:22 =============================================================================== AID: au-5-1-1-pots-1 Destination Phone Number: 781-466-2154 Timestamp: 6/16/07 12:02:00 Dialtone verified: OK Next-hop connection time: 150 milliseconds Post Dialtone Delay: 250 milliseconds Ringback tone verified: OK Media negotiation: 110 milliseconds Media path connectivity: OK =============================================================================== Command completed successfully Error Codes Test results are not available Invalid port. Page 401 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests test borscht (ontpotsaddress) Description Performs a self test of the BORSCHT functions provided by the POTS interface toward the subscriber. BORSCHT functions are: - Battery Feed - An internal test resistor is used to simulate a maximum-length loop. The current through the test resistor is measured and anything less than 23 ma is considered a failure. - Over Voltage - There is no test here. What this is meant to indicate is that the ONT incorporates protection circuitry that clamps any positive voltage or a negative voltage greater than 85V. - Ringing - This test simulates ringing by applying a reduced ringing voltage across the test resistor. It measures that voltage. Any value greater than 11 Vrms or less than 9 Vrms is declared a failure. - Supervision - The test resistor is used to test this. First, the test resistor is put in the loop, thereby closing the loop; if an off hook indication is not received, then the test fails. The test resistor is then removed from the loop, thereby opening the loop; if an on hook indication is not received, the test is declared a failure. - Codec - An internal loopback is set up up between the codec and the analog portion. A digital pattern is sent for 250 ms. The received patterns are compared against the original to validate the integrity of the codec. - Hybrid - No test is performed here since the ONT doesn't utilize a hybrid with a fixed balancing network - the type of circuitry that the Hybrid test was intended to verify. The ONT instead uses active echo cancellation to compensate for variable loop impedances. - Test Loop: Test of the subscriber loop circuit. Note that this portion of the test is covered by the separate MLT test operation (test loop) When this test request is sent to the ONT, The CLI interface will respond with the message "Test initiated.". When the test results are available from the ONT, the results are communicated by autonomous messages to the CLI, TL1 and SNMP interfaces. This command will be denied if a POTS call is in progress. This command is not allowed during a software download or when the ONT is operating on battery backup. It is also not allowed for an ONT that is preprovisioned and not ranged. If VDSL2 service is provided on the same T-R pair, then data service will be temporarily impacted for the duration of the test. User Privilege Level: Operator Required Parameters: ontpotsaddress Indicates the ONT POTS address: - For integrated ONTs: oltslot-port-channel-pots-index (eg. au-3-1-16-pots-1) Default Values none Confirmation Message Page 402 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests This will temporarily affect the users ability to make new calls on the port. Do you want to continue? y | n >y Test initiated. Example(s) Example 1: AXS2200> test borscht au-3-1-16-pots-1 This will temporarily affect the users ability to make new calls on the port. Do you want to continue? y | n >y Test initiated. Error Codes Invalid for pre-provisioned ONTs without serial numbers ONT does not exist ONT does not support this functionality ONT Invalid port ONT is in battery backup mode - retry when AC power is restored. ONT is in wrong state for this request POTS line is in use. Retry later. Page 403 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests test dialtone (ontpotsaddress) Description The purpose of the Dial Tone/Break Digit test is to validate the POTS connection to the Local Digital Switch (LDS). The circuitry on the ONT is used to simulate an off-hook condition, and verifies the receipt of a dial tone from the LDS. Once the dial-tone is received, the ONT circuitry simulates a pulse digit being dialed (pulse digit "1"), and verifies that the dial tone is removed in response. When this test request is sent to the ONT, The CLI interface will respond with the message "Test initiated.". When the dialtone/ break digit test results are available from the ONT, the results are communicated by autonomous messages to the CLI, TL1 and SNMP interfaces. This command will be denied in any of the following cases: - a POTS call is in progress - the ONT is configured for VoIP - the ONT is pre-provisioned - the ONT is operating on battery backup - the ONT is undergoing a software download User Privilege Level: Operator Required Parameters: ontpotsaddress Indicates the ONT POTS address: - For integrated ONTs: oltslot-port-channel-pots-index (eg. au-3-1-16-pots-1) Default Values none Confirmation Message This will temporarily affect the users ability to make new calls on the port. Do you want to continue? y | n >y Test initiated. Example(s) Example 1: AXS2200> test dialtone au-3-1-1-pots-1 This will temporarily affect the users ability to make new calls on the port. Do you want to continue? y | n >y Test initiated. Page 404 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests Error Codes POTS line is off-hook. Retry later. ONT Invalid port ONT is in wrong state for this request Invalid for pre-provisioned ONTs without serial numbers ONT does not support this functionality VOIP is configured on ONT ONT is in battery backup mode - retry when AC power is restored. tdm-h248 connection must first be established Invalid - connection is inactive ONT does not exist Page 405 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests test loop (ontpotsaddress) priority ({normal | override}) Description Initiates Metallic Loop Tests for individual POTS ports. The following tests are performed in the following order: - Hazardous Potential - fails if the Tip-Ground, or Ring-Ground AC voltage is greater than 50 volts rms, or if the Tip-Ground, or Ring-Ground DC voltage is greater than the threshold value shown below (depends upon ONT hardware capability): ONT1000GT,ONT1400GT,SF24210,SF24200,ONT1500GT,ONT6000GET,ONT6000GVT: -70 volts, or +70 volts - FEMF (Foreign Electromotive Force) - tests for excessive voltage on the POTS drop. - fails if the Tip-Ground, or Ring-Ground AC voltage is greater than 10 volts rms, or if the Tip-Ground, or Ring-Ground DC voltage is greater than the threshold shown below (depends on ONT hardware capability): ONT1000GT,ONT1400GT,ONT1440GTI,SF24210,SF24200,ONT1500GT,ONT6000GET,ONT6000GVT: -6 volts or +6 volts - ROH (Receiver Off-Hook) - distinguishes between a receiver off-hook and a resistive fault. If the DC resistance as measured between the tip and ring at two different voltages varies more than 15%, then this indicates the receiver is off-hook. - Resistive Fault - Tests for resistive faults on the loop (i.e. shorts or grounds). Fails if the DC resistance across Tip-Ground, Tip-Ring or Ring-Ground is less than 150K ohms. - Ringers Test - tests for appropriate ringer terminations on customer line. Fails if the equivalent ringer count across the tip and ring is either less than 0.07 REN or greater than 5.0 REN. Responds with "Test initiated." when the test message is sent to the ONT. When the MLT test results are available from the ONT, the results are communicated by autonomous messages to CLI, TL1 and SNMP interfaces. This test will not be allowed if a call is in progress and the priority is normal. This test will be allowed if a call is in progress and the priority is overridethe results will detect that the receiver is off-hook (and will affect service). This command is not allowed during a software download or when the ONT is operating on battery backup. It is also not allowed for an ONT that is preprovisioned and without an actual serial number assigned. NOTE: Only tests that are supported by the ONT hardware will be performed. User Privilege Level: Superuser Required Parameters: ontpotsaddress Indicates the ONT POTS address: - For integrated ONTs: oltslot-port-channel-pots-index (eg. au-3-1-16-pots-1) Optional Parameters: priority {normal | override} Indicates the priority of the command. - normal: The operation will be prohibited if the POTS line is off-hook Page 406 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests - override: The operation will be allowed regardless of the state of the POTS line. Default Values priority = normal Confirmation Message This will temporarily affect service on the port. Do you want to continue? y | n >y Test initiated. Example(s) Example 1: (default tests, success) AXS2200> test loop au-3-1-16-pots-1 This will temporarily affect service on the port. Do you want to continue? y | n >y Test initiated. Example 2: (forced test) AXS2200> test loop au-3-1-16-pots-1 priority override This will temporarily affect service on the port. Do you want to continue? y | n >y Test initiated. Error Codes POTS line is off-hook. Retry later. Invalid for pre-provisioned ONTs without serial numbers ONT Invalid port ONT does not exist Invalid ONT equipment state for request ONT does not support this functionality Page 407 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests test sip-dialtone (ontpotsaddress) phone (number) Description The purpose of the SIP-PBDT (Pull/break dialtone test) is to verify - the connectivity of the POTS line to the softswitch - and the continuity of the voice signal (tones) just beyond the ONT to the RJ-11 (verifies A/D and D/A circuitry in the SLIC and the analog outside the SLIC) If the test request is accepted the CLI interface will respond with "Test initiated". The ONT disconnects from the subscriber's phone for the test (Note: this is not the case for the ONT6000GVT) and calls the phone number provided in the input parameter. When the test terminates, an autonomous message (event) will be sent to the operator via the CLI and SNMP interfaces. Results from the test can be queried via "show testresults sip-dialtone". If the test is denied for any of the following reasons: - a POTS call is in progress - the subscriber line is busy (e.g. a test in progress) - the ONT is configured for tdm-voice (class 5 switch) - the ONT is pre-provisioned - the ONT is undergoing a software download - VoIP Connection does not exist - VoIP Connection is not active - POTS port is not active the reason for denying the test will be displayed at the CLI interface. User Privilege Level: Operator Required Parameters: phone number The target or destination phone number to be dialed. A string of up to 20 characters containing only digits 0 to 9. ontpotsaddress Indicates the ONT POTS address: - For integrated ONTs: oltslot-port-channel-pots-index (eg. au-3-1-16-pots-1) Default Values None Confirmation Message This will temporarily affect the users ability to make new calls on the port. Do you want to continue? y | n >y Test initiated. Example(s) Example 1: AXS2200> test sip-dialtone au-3-1-1-pots-1 phone 7814662154 This will temporarily affect the users ability to make new calls on the port. Do you want to continue? y | n >y Page 408 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ONT Tests Test initiated. Example 2: AXS2200> test sip-dialtone au-3-1-1-pots-1 phone 7814662154 Test denied - the ONT is configured for tdm-voice Error Codes Invalid - connection is inactive Invalid for pre-provisioned ONTs without serial numbers ONT does not exist ONT does not support port type ONT does not support this functionality ONT Invalid port ONT is in wrong state for this request POTS channel not configured POTS line is off-hook. Retry later. VOIP is not configured or supported on ONT Connection does not exist Page 409 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 410 ONT Tests AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA PPPoE PPPoE set chassis circuit-id format ({aid | tr-156 | cu | tt}) access-node-id mgmt-ip Description Specifies the format and access-node-id to construct "circuit-id". User Privilege Level: Superuser Required Parameters: access-node-id mgmt-ip Specifies that mgmt-ip address (dotted decimal) is used as access-node-id format {aid | tr-156 | cu | tt} specifies the format to construct circuit-id. Default Values Before circuit-id is configured, the default is: format = aid access-node-id = mgmt-ip Confirmation Message This will change the circuit-id of all ONT interfaces. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis circuit-id format tr-156 access-node-id mgmt-ip This will change the circuit-id of all ONT interfaces. Do you want to continue? y | n >y Command completed successfully Error Codes Page 411 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA PPPoE set chassis circuit-id format ({aid | tr-156 | cu | tt}) access-node-id user-string (value) Description Specifies the format and access-node-id to construct "circuit-id". User Privilege Level: Superuser Required Parameters: format {aid | tr-156 | cu | tt} specifies the format to construct circuit-id. access-node-id user-string value Specifies that a user-defined string is used as access-node-id. When the format is "CU", the user-string should be up to 50 characters including alphanumeric, dash("-"), underscore("_"), and dot("."). Otherwise, the user-string should be up to 30 characters including alphanumeric, dash("-"), underscore("_"), slash("/") and dot("."). Default Values Before circuit-id is configured, the default is: format = aid access-node-id = mgmt-ip Confirmation Message This will change the circuit-id of all ONT interfaces. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis circuit-id format tr-156 access-node-id user-string NewEngland-Boston-OLT101 This will change the circuit-id of all ONT interfaces. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid user-string Page 412 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA PPPoE show stats ont pppoe-ia ({ontdataaddress | ontaddress}) svid (svlanid) cvid (cvlanid) Description Displays statistics counters of PPPoE Intermediate Agent protocol messages obtained for an ONT member of a VLAN, or alternatively, displays the aggregated statistics counters of PPPoE messages obtained for an ONT and a single-tag VLAN. The latter applies only to the combination of certain ONTs (ONT6000GVT and ONT1400GT/GTI) and a single-tag VLAN, while the former applies to rest of ONT and VLAN combinations. Note that PPPoE-IA does not apply to TLS, VOIP and Multicast VLANs. Also PPPoE-IA is not supported for VLAN members on ONTs attached to an AGPONC port. The set of statistics counters include: PPPoE TOTAL IN PKTS PPPoE PADI PKTS PPPoE PADR PKTS PPPoE PADT PKTS PPPoE PADI DROPPED PPPoE PADR DROPPED PPPoE TOTAL DROPPED User Privilege Level: Operator Required Parameters: {ontdataaddress | ontaddress} Specifies either an ONT data port address, or an ONT address. ontdataaddress: Indicates the ONT address for the data port in the format: oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - porttype (enet, moca, vdsl2) - index (1-n) ontaddress: Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot (au-1 through au-18 for AXS2200, au-1 through au-14 for AXS1800) - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Optional Parameters: Page 413 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA cvid PPPoE cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. Default Values Confirmation Message Example(s) Example 1: AXS2200> show stats ont pppoe-ia au-14-1-2-enet-1 svid 400 =============================================================================== ONT PPPoE STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 2 AID: au-14-1-2-enet-1 OLT PON Card: AGPONB ONT Operating Status: PPPoE PPPoE PPPoE PPPoE PPPoE PPPoE PPPoE active In Packets: 6 PADI: 3 PADR: 3 PADT: 0 PADI Dropped: 0 PADR Dropped: 0 Total Dropped: 0 =============================================================================== Command completed successfully Example 2: AXS2200> show stats ont pppoe-ia au-14-1-2 svid 400 =============================================================================== ONT PPPoE STATISTICS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 Channel: 2 AID: au-14-1-2 OLT PON Card: AGPONB ONT Operating Status: PPPoE PPPoE PPPoE PPPoE PPPoE PPPoE PPPoE active In Packets: 6 PADI: 3 PADR: 3 PADT: 0 PADI Dropped: 0 PADR Dropped: 0 Total Dropped: 0 =============================================================================== Command completed successfully Page 414 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA PPPoE Error Codes VLAN member not found ONT is on a PON that does not support this functionality CVLAN ID required for double-tagged VLANs Invalid cvid Invalid svid VLAN - CVID not applicable for single-tagged VLANs Invalid equipment state for request Invalid AID PPPoE status is set to disable VLAN not found ONT does not support this functionality Page 415 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 416 PPPoE AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles Profiles del profile l2config name (l2configname) Description This deletes a Layer 2 Configuration profile. User Privilege Level: Superuser Required Parameters: name l2configname Name of the Layer 2 profile Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile l2config name silver Command completed successfully Error Codes Profile name not found in Profile Table qbdef profiles cannot be deleted Default profiles cannot be deleted Profile in use Page 417 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles del profile lldp-med name (name) Description This command deletes the entry in the LLDP-MED Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values n/a Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile lldp-med name pol21 Command completed successfully Error Codes Default profiles cannot be deleted Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Page 418 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles del profile ont-qosconfig name (ontqosconfigname) Description This deletes the ont-qosconfig profile User Privilege Level: Superuser Required Parameters: name ontqosconfigname ONT QoS Configuration profile Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile ont-qosconfig name silver Command completed successfully Error Codes Default profiles cannot be deleted qbdef profiles cannot be deleted Profile in use Profile name not found in Profile Table Page 419 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles set profile l2config default-name (name) Description Sets the name of the profile to use as the default for all new ONT settings. If the assigned default profile settings cannot be supported by the ONT hardware, then the profile qbdef will be applied. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values name = qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example: AXS2200> set profile l2config default-name onttype1 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Error Codes Profile name not found in Profile Table Page 420 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles set profile l2config name (l2configname) acceptframetypes (frametype) dscpmap (state) pbitremap (state) trustpbit (value) fixedprio ({0-7}) tls ({yes | no}) maxmac (value) Description Defines a profile for the parameters of the L2 switch on the ONT. Any parameter that is not specified will be set to the default value. For ONT6000GVT, trustpbit = yes. It cannot be disabled. For ONT1100GE, ONT1400GT and ONT1500GT: For a non-TLS connection, "trust ingress priority" is defined for these ONT's to mean that the priority will be the greater of the ingress priority or the provisioned port default priority. Note that the operator can set the port default priority = 0 to always ensure that the ingress priority gets used. However that will restrict the priority of untagged packets to pbit = 0. For ONT1100GE, ONT1400GT and ONT1500GT: For a TLS connection, The ability to trust the incoming P-bits in either a Priority tagged or a user-tagged frame from the CPE and set the resultant VLAN tag P-bits to them on a TLS port does not exist. Thus the option is ignored. The acceptframetypes attribute must be set to all if the TLS setting is no, or the command will be denied. MAC learning Limit: {0-32} User Privilege Level: Superuser Required Parameters: l2configname name Name of the Layer 2 profile Optional Parameters: acceptframetypes frametype Sets the allowable input packet types. Valid values for frametype are: - tagged - untaggged - all If an input packet does not match the acceptable frame type, then it is dropped. Note: "untagged" includes priority-tagged frames. trustpbit value Sets the value for trust P-bit. Valid values are: - yes - no If "yes" then the p-bits of the subsequent added VLAN tags are set to the incoming p-bits. If there are no incoming P-bits, then the default P-bit mapping is used. fixedprio {0-7} If "trust_pbit = no" and "fixed_prio" is assigned a value, then the P-bits of the subsequent added VLAN tags are set to the value. This is also the P-bit value assigned to Tags added to untagged frames. (default = 0) Page 421 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA maxmac Profiles value Sets the value for the MAC address learning table limit. Valid values are from {0-32}. 0 means there will be no learning limit. An integer number from 1-32 is the number of MAC address entries that will be learned by that port. {yes | no} tls Sets whether the port supports Transparent LAN Services (TLS) or not. - yes: the port passes any user tags received on the input. - no: the port drops any packets that are tagged and whose tag does not have the default VLAN value. This setting is only valid for moca, enet and vdsl2 ports. dscpmap state Sets the state for ONT mapping between DSCP values and P-bits. Valid states are: - enable - disable pbitremap state Sets the state for applying the ONT pbitremap profile. Valid states are: - enable - disable Default Values acceptframetypes = all dscpmap = disable pbitremap = disable trustpbit = no fixedprio = 0 tls= no maxmac = 0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile l2config name basicl2 acceptframetypes all trustpbit yes Command completed successfully Example 2: AXS2200> set profile l2config name basicl2 acceptframetypes all trustpbit yes Command completed successfully Example 3: AXS2200> set profile l2config name basicl2 acceptframetypes all trustpbit yes tls no Command completed successfully Example 4: AXS2200> set profile l2config name basicl2 acceptframetypes all trustpbit yes tls no maxmac 18 Page 422 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles Command completed successfully Error Codes Invalid name Name already in use Maximum number of allowed profiles exceeded VLAN - Acceptframetypes must be all if TLS is set to no Invalid MAC Learning Limit At least one attribute is required to be set Page 423 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles set profile ont-qosconfig default-name (name) Description Sets the name of the profile to use as the default for all new ONT settings. If the assigned default profile settings cannot be supported by the ONT hardware, then the profile qbdef will be applied. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values name = qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example: AXS2200> set profile ont-qosconfig default-name onttype1 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Error Codes Profile name not found in Profile Table Page 424 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles show profile lldp-med name (name) Description Displays the contents of the profile table for LLDP-MED profiles. If no name is provided, all entries will be shown. Displayed values are: Name: The name of the entry in the LLDP profile table State: Administrative State of the protocol VoIP-Bear-Tag: Tagging Mode Voice Bearer Traffic VoIP-Sig-Tag: Tagging Mode for Voice Signaling Traffic VoIP-Bear-VID: VLAN ID for Voice Bearer Traffic VoIP-Sig-VID: VLAN ID for Voice Signaling Traffic VoIP-Bear-pbit: pbit for Voice Bearer Traffic VoIP-Sig-pbit: pbit for Voice Signaling Traffic VoIP-Bear-DSCP: DSCP for Voice Bearer Traffic VoIP-Sig-DSCP: DSCP for Voice Signaling Traffic RxInterval: Interval Timer The default profile is indicated at the top of the report, and by an asterisk after the name. User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values all entries if no name Confirmation Message Command completed successfully Example(s) Example 1: (specific entry) AXS2200> show profile lldp-med name POL =============================================================================== LLDP-MED PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name: POL State: VoIP-Bear-tag: VoIP-Sig-tag: VoIP-Bear-VID: VoIP-Sig-VID: VoIP-Bear-pbit: VoIP-Sig-pbit: VoIP-Bear-DSCP: VoIP-Sig-DSCP: TxInterval: enabled tagged tagged 15 17 6 6 46 46 30 =============================================================================== Page 425 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Profiles Command completed successfully Example 2: (all entries) AXS2200> show profile lldp-med =============================================================================== LLDP-MED PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name: qbdef State: VoIP-Bear-tag: VoIP-Sig-tag: VoIP-Bear-VID: VoIP-Sig-VID: VoIP-Bear-pbit: VoIP-Sig-pbit: VoIP-Bear-DSCP: VoIP-Sig-DSCP: TxInterval: disabled untagged untagged 0 0 6 5 46 24 30 -----------------------------------------------------------Name: POL State: enabled VoIP-Bear-tag: tagged VoIP-Sig-tag: tagged VoIP-Bear-VID: 15 VoIP-Sig-VID: 17 VoIP-Bear-pbit: 6 VoIP-Sig-pbit: 6 VoIP-Bear-DSCP: 46 VoIP-Sig-DSCP: 46 TxInterval: 30 =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 426 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 427 Profiles AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Provisioning - Chassis del chassis out-of-band-mgt (sw-a-enet-mgt1) Description Deletes the IP address of sw-a-enet-mgt1. User Privilege Level: Superuser Required Parameters: out-of-band-mgt sw-a-enet-mgt1 Indicates the desired the Ethernet management port at the switch card. Note: The A slot of the A/B slot pair is used to specify the address. Default Values None. Confirmation Message This will delete the specified out-of-band-mgt IP address. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del chassis out-of-band-mgt sw-a-enet-mgt1 This will delete the specified out-of-band-mgt IP address. Do you want to continue? y | n >y Command completed successfully Error Codes Video-RPD must first be deleted Out-of-band-mgt IP address not configured Page 428 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set alarm entity (entity70) condtype (condtype70) sev ({sa | nsa}) level (alarmlevel) Description Sets an alarmed condition on the OLT or ONT to use a different level in notification messages. Note: Miscellaneous discrete input alarm level provisioning will apply the level to all OLT miscellaneous inputs. Likewise, ONT Miscellaneous discrete input alarm level provisioning will apply the level to ALL ONT miscellaneous inputs. User Privilege Level: Superuser Required Parameters: entity entity70 Entity indicates one of the following: - com (common system) - env (environmental) - eqpt (equipment) - eth (ONT Ethernet interface) - gige (OLT gigabit Ethernet interface) - hcna (ONT HCNA interface) - lag (link aggregation group) - moca (ONT MOCA interface) - pon (PON interface) - t0 (voice interface) - t1-vg (Voice Gateway DS1 interface) - vdsl (ONT VDSL2 interface) - video (ONT RF video interface) - voip (ONT Voice over IP interface) condtype condtype70 Condtype indicates the type of alarmed condition. The full list on the order of a hundred supported alarmed condition types is listed below by entity. Entity Condition Type ------ ------------------------COM CNTLSWMM COM DBDOWN COM DBUPGRDFAIL COM DIGCERT3DAY COM DIGCERT7DAY COM DIGCERTEXP COM FTPCONNDENY COM IPTVLOCH COM LHI COM LWMEM COM PWR-A COM PWR-B COM RADIUSCOMFAIL COM SWNA COM SYNCBITSAIS COM SYNCBITSLOF Page 429 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA COM COM COM COM COM COM COM COM ENV ENV ENV ENV ENV ENV ENV EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT Page 430 Provisioning - Chassis SYNCBITSLOS SYNCREFREVSW SYSBKUPFAIL SYSBKUPINV SYSDBTOOBIG SYSMGMTLOL SYSUPGRADEIP TELNETCONNDENY BATDSCHRG BATTERY BATTERYMISS MISC ONTMISC ONTOPENDOOR PWRANDBATT BATTERYPWR CRDFAIL CRDIMAGEFAIL CRDMM CRDRECIP CRDSFTFL EQPT FA FANFAIL FANMISS FRCDSW IMPROPRMVL LOCKOUTOFPR LOL-A LOL-B NVM-DBMM NVM-MEMFULL NVM-WF ONTAUTOSWFAIL ONTCAPFAIL ONTESTOP ONTESTOPST ONTMM ONTRECFAIL ONTRECFAIL-CF ONTSWNA ONTTXLASER POTSBIAS POTSBIASCRD PWR PWRFANCTL PWRMISCINPUT SFI SFI-A SFI-B SFPINVLD SFPRMVD SFT AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis EQPT SFT-BOOTROM EQPT SFT-CRDCOM EQPT SFT-VERMM EQPT SYSAUDITFAIL EQPT SYSCARDMM EQPT SYSSNTPFAIL EQPT SYSVERMM EQPT TRMT ETH LOS ETH MACTBLFULLETH GIGE AUTONEGOTERR GIGE FE-CREVENT GIGE FE-DYINGGASP GIGE FE-LOOPBACK GIGE FE-TCA-EF GIGE FE-TCA-EFP GIGE FE-TCA-EFSS GIGE FE-TCA-ESP GIGE LACPOOSYNC GIGE LINKFAIL GIGE LOOPBACK GIGE RFI GIGE TCA-ERR GIGE TCA-F-GEWANRCV GIGE TCA-R-GEWANRCV HCNA LOS HCNA MACTBLFULLHCNA LAG REDCAP0-50 LAG REDCAP100 LAG REDCAP50-99 MOCA LOS MOCA LOWBW PON AUTODISCCOLL PON LOS PON ONTCHLNOTSET PON ONTLOS PON ONTOAM PON ONTSD PON PONPWR PON PONUPGRADEIP T0 SIGTRCLOG T0 SLICCALFAULT T0 SLICCALWARN T1-VG AIS T1-VG DL T1-VG EOC T1-VG EOCPRI T1-VG EOCSEC T1-VG LDSMJ T1-VG LDSMN T1-VG LOF T1-VG LOS T1-VG LPBKLINE Page 431 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG VDSL VDSL VDSL VDSL VDSL VDSL VDSL VDSL VIDEO VIDEO VIDEO VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP LPBKLINEFE LPBKPAYLOAD LPBKPAYLOADFE RAI TMC TMCPRI TMCSEC VTU-O-LINIT VTU-O-LOF VTU-O-LOL VTU-O-LOP VTU-O-LOS VTU-R-LOF VTU-R-LOP VTU-R-LOS LOS-DNSTRM OPTVIDPWR-HIGH OPTVIDPWR-LOW DHCPFAIL-INC DHCPFAIL-NL GETFAIL-AUTH GETFAIL-BP GETFAIL-DN GETFAIL-NOTCP GETFAIL-SFC GETFAIL-TLS GETFAIL-TO MGCOOC RTCPPKTFAIL SIPINVFAIL-AUTH SIPINVFAIL-DN SIPINVFAIL-SFC SIPINVFAIL-TO SIPREGFAIL-AUTH SIPREGFAIL-DN SIPREGFAIL-SFC SIPREGFAIL-TO SUBSCFAIL-AUTH SUBSCFAIL-DN SUBSCFAIL-SFC SUBSCFAIL-TO sev {sa | nsa} Indicates the severity: - sa (service affecting) - nsa (non-service affecting) level alarmlevel Indicates the desired alarm level for the condition. Valid choices are: - CR (critical) - MJ (major) - MN (minor) - NA (no alarm level, reported by autonomous messages and in logs) - NR (not reported in autonomous messages or in history logs) Page 432 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Default Values None Confirmation Message This will change the alarm level for future detected alarms. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200> set alarm entity gige condtype linkfail sev sa level MJ This will change the alarm level for future detected alarms. Do you want to continue? y | n >y Command completed successfully. Error Codes System does not support this alarm Invalid condition type Level not supported Invalid entity Invalid combination of entity and condition type Page 433 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis autonomous ({on | off}) Description Enables or disables the automatic display of autonomous alarms or events when the user is logged in to the CLI. When enabled, the CLI will automatically display any autonomous messages that occur while the user is logged in. The autonomous alarms or events will also be stored in the applicable log whether autonomous messages are enabled or disabled. User Privilege Level: Superuser Required Parameters: autonomous {on | off} "on" indicates autonomous messages will be displayed during a CLI session. "off" indicates autonomous messages will not be displayed during a CLI session. Default Values autonomous messages = ON Confirmation Message This will affect alarm and event display to CLI sessions. Do you want to continue? y |n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis autonomous off This will affect alarm and event display to CLI sessions. Do you want to continue? y |n >y Command completed successfully Error Codes Page 434 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis bmc-rate (ratechassis) Description This command allows a user to configure a maximum rate in packets per second (pps) that the system will allow receiving Broadcast and unknown unicast packets in the downstream direction per port, and that the system will allow receiving Multicast, Broadcast and unknown Unicast packets in the upstream direction per port. The value is applied to each OLT GPON Port, OLT Ethernet port, and Link Aggregation group. Individual interfaces may override this chassis level setting. When this value is changed, then all OLT GigE/10GigE/GPON ports and Link Aggregation Groups that are set to use the chassis default for bmc-rate will be updated to use the new value automatically. User Privilege Level: Superuser Required Parameters: bmc-rate ratechassis The rate limit for packet forwarding, in packets per second. The range is {0, 1-1,488,100}, where 0 indicates no limit is imposed. The value is applied ito GPON ports in the upstream direction for multicast, broadcast and unknown unicast packets. The value is applied to OLT GigE/10GigE/LAG interfaces in the downstream direction for broadcast and unknown unicast packets. Default Values 500 Confirmation Message This will affect the filtering rate. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis bmc-rate 1000 This will affect the filtering rate. Do you want to continue? y | n > y Command completed successfully Error Codes Invalid bmc-rate Page 435 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis bulkstats ({enable | disable} ) Description This command will enable and configure the bulk collection of statistics on the OLT. When enabled the statistics will be sampled every 5 minutes and saved in a file in RAM on the OLT. User Privilege Level: Superuser Required Parameters: bulkstats {enable | disable} Indicates if bulk statistics collection is to be turned on or off for the system. Default Values bulkstats is disabled Confirmation Message This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis bulkstats enable This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> set chassis bulkstats disable This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Error Codes Bulkstats is already enabled SNTP not enabled Page 436 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis countrycode (country) Description Allows selection of the country code of the OLT, which will drive localized behavior of features, which vary across countries. E.g. all ONT POTS interfaces, Timing source etc... ISO 3166-alpha3 is used for this list. Supported values for country code are (full country name added as information in parentheses): AAE (Europe Generic - ETSI) ARE (United Arab Emirates) ARG (Argentina) BRA (Brazil) CAN (Canada) CHL (Chile) CHN (China) COL (Columbia) CYM (Cayman Islands) CZE (Czech Republic) ECU (Ecuador) EGY (Egypt) HUN (Hungary) JOR (Jordan) LBN (Lebanon) LTU (Lithuania) MEX (Mexico) OMN (Oman) PAK (Pakistan) PAN (Panama) POL (Poland) QAT (Qatar) RUS (Russian Federation) SAU (Saudi Arabia) USA (United States) VEN (Venezuela) ZAF (South Africa) User Privilege Level: Superuser Required Parameters: countrycode country Allows selection of the country code for this OLT per ISO-3166-alpha3. This parameter will drive localized behavior of areas such as ONT POTS interfaces, OLT Timing Sources etc..., which may vary across countries. Default Values USA Confirmation Message Warning: Changing the country code may temporarily affect user services. Do you want to continue? y | n >y Command completed successfully. Example(s) Page 437 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Example 1: AXS2200> set chassis countrycode USA Warning: Changing the country code may temporarily affect user services. Do you want to continue? y|n y Command completed successfully Example 2: AXS2200> set chassis countrycode LTU Warning: Changing the country code may temporarily affect user services. Do you want to continue? y|n y Command completed successfully Error Codes Invalid Country Code Page 438 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis date (date) Description Sets the system date. User Privilege Level: Superuser Required Parameters: date date The date must be entered in a mm/dd/yyyy format, for example, 09/09/2000. Default Values none Confirmation Message This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis date 8/20/2004 This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Error Codes invalid date Page 439 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis dhcp-guard ({enable | disable}) Description Specifies whether DHCP guard is enabled. When enabled, DHCP OFFER/ACK/NAK packets from all user interfaces will be rejected. User Privilege Level: Superuser Required Parameters: dhcp-guard {enable | disable} Default Values when the command is not specified, the default is disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set chassis dhcp-guard enable Command completed successfully Error Codes Page 440 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis dot1x (enable | disable) Description There is a chassis setting for the 802.1x authentication that indicates whether the OLT acts as an authenticator or not for all subtending ONTs. Note: There is a new setting in enetport, mocaport, hcnaport and vdslport profiles for 802.1x authentication (dot1x) to be enabled or disabled on the ONT data port. If the OLT will function as an 802.1x authenticator, then set the chassis setting for dot1x to enable. If enabled, then all the individual ONT port profile settings for dot1x apply (i.e. enable or disable). If the chassis setting for dot1x is set to disable, then the ONT profile settings don't matter and are ignored. User Privilege Level: Admin Required Parameters: dot1x enable | disable Enable or disable the 802.1x authentication Default Values disable Confirmation Message You have elected to enable or disable dot1x which is service affecting. Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> set chassis dot1x enable You have elected to enable or disable dot1x which is service affecting. Do you want to continue? y|n >y Command completed successfully. Error Codes Page 441 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis dst ({enable|disable}) Description This CLI command enables and disables daylight savings time on the OLT. User Privilege Level: Superuser Required Parameters: dst {enable|disable} Enable or disables daylight savings time. Default Values disable Confirmation Message This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis dst enable This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> set chassis dst disable This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Error Codes Page 442 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis forwarding-mode (mode) Description Sets the default chassis forwarding mode for single tagged VLANs. All single tagged VLANs and ONTs use this value by default when they are created, unless individually overridden. User Privilege Level: Superuser Required Parameters: forwarding-mode mode Specifies the type of VLAN forwarding mode. Valid choices are: - switched - isolated (TR-101 access) Default Values default = isolated Confirmation Message Command completed successfully Example(s) Example: AXS2200> set chassis forwarding-mode switched Command completed successfully Error Codes AGPONC card is incompatible with feature - remove and clear slot first Some ONTs are incompatible with feature Page 443 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis installer name (value) email (address) phone (number) Description Sets the OLT installer's contact information. This command allows to set (optionally) the OLT installer's name/ID, phone number and email address User Privilege Level: Superuser Required Parameters: installer Optional Parameters: name value Name/ID of the Installer, who set up the OLT for service. The system contact may be any alphanumeric string up to 80 characters long using alphanumeric characters plus dash "-" and underscore "_". email address Email address of the OLT installer. String of up to 80 characters using alphanumeric characters, periods ".", at symbols "@" and dashes "-" phone number Telephone number of the OLT installer. This can be a string of up to 20 alphanumeric characters, dashes "-" and period "." Default Values name="" email="" phone="" Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> set chassis installer name CO_334_Walker email
[email protected] phone 978-555-4533 Command completed successfully Error Codes Invalid email address Invalid installer name Invalid phone number Page 444 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis macage (seconds) Description Allows a user to configure the elapsed time before a learned MAC address is aged out of the forwarding tables in the OLT. User Privilege Level: Admin Required Parameters: macage seconds Possible values: 0 - 65535 seconds No aging= 0 seconds Default Values default = 300 Confirmation Message This command allows you to configure the time a learned MAC address is aged. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis macage 3200 This command allows you to configure the time a learned Do you want to continue? y | n > y MAC address is aged. Command completed successfully Error Codes Invalid MAC Age Range Page 445 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis mcast-src-guard ({enable | disable}) Description Specifies whether "multicast source guard" is enabled. When enabled, IGMP queries from all user interfaces will be rejected. User Privilege Level: Superuser Required Parameters: mcast-src-guard {enable | disable} Default Values when the command is not specified, default is disable Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> set chassis mcast-src-guard enable Command completed successfully Error Codes Page 446 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis name (chassis_name) Description Sets the OLT chassis name. This name will be used for the CLI prompt. For example, if the chassis name is set to "NewEngland", then the CLI prompt will be "NewEngland>". If the name is changed, the prompt change will take effect upon subsequent login sessions. User Privilege Level: Superuser Required Parameters: name chassis_name Specifies the user-defined name for the chassis. The name may be up to 20 characters in length, including alphanumeric, "-" (dash) and "_" (underscore) characters. Default Values AXS2200 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set chassis name MOTOAXS Command completed successfully Error Codes Invalid name Name too long Name already in use Page 447 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis ont-channelassignment ({manual | auto | registration}) Description Sets the method for assigning ONT channel IDs. The ONT channel ID is used in the address for the ONT. The ONT address takes the form: <slot>-<port>-<channel> where slot is the slot of the PON card in the OLT, and port is the PON port on the card. User Privilege Level: Superuser Required Parameters: ont-channelassignment auto | registration} {manual | Sets the method for assigning channel IDs to ONTs once they are ranged: - manual: The channel ID is set by the operator for each ONT after it is ranged. - auto: The OLT will automatically assign a new channel ID for each ONT after it is ranged. - registration: Each ONT is pre-provisioned on the OLT and includes a Registration ID and channel. Upon ranging, the discovered Registration ID is used to look up the preprovisioned channel ID, and that channel ID is automatically assigned to the ONT. Default Values ont-channel assignment = manual Confirmation Message This will affect the addressing for all ONTs. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis ont-channelassignment auto This will affect the addressing for all ONTs. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> set chassis ont-channelassignment registration This will affect the addressing for all ONTs. Do you want to continue? y | n >y Command completed successfully Page 448 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Error Codes Invalid when ONT(s) have unassigned serial numbers Page 449 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis ont-enet-loopdetection ({enable | disable}) Description Enables or disables ONT Ethernet port loop detection for all ONTs subtending from the OLT chassis that support the capability. ONTs that do not support the capability will have loop detection disabled. User Privilege Level: Superuser Required Parameters: ont-enet-loopdetection disable} {enable | Selects to enable or disable ONT Ethernet port Loop Detection. Default Values disable Confirmation Message This will affect ONT Ethernet port operation. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis ont-enet-loopdetection enable This will affect ONT Ethernet port operation. Do you want to continue? y | n > y Command completed successfully Error Codes Page 450 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis ont-range ({autodisc | recovery | manual}) interval (interval) timeout (value) Description Used to set the method used by the system for ONT ranging. Additional parameters are allowed based on what setting is chosen. If none are provided, the default value will be used: - interval applies only for the autodisc setting. This interval is used to perform the 3 serial number acquisitions required to range a "cold" ONT (e.g. an ONT that is newly powered up and has not been ranged before). - timeout applies only for the recovery setting For recovery, attempts to rerange the ONT by serial number are performed every 5 seconds until the configured value for recovery timeout is reached. User Privilege Level: Superuser Required Parameters: ont-range manual} {autodisc | recovery | Sets the system method for ranging ONTs: - autodisc: will autodiscover any ONTs on the PON and will automatically recover any failed ONTs on the PON. - recovery: will automatically recover failed ONTs on the PON - requires manual ranging when a new ONT is added to the PON - manual: always requires a manual range to discover or recover an ONT. Optional Parameters: interval interval Sets the interval between auto-discovery attempts. The interval is an integer value set in seconds, whose valid range is from 15-300. timeout value The recovery timeout is a value between 1 and 300 hours, or 0 for infinite retries. Default Values ont-range = recovery interval = 30 seconds timeout = 300 hours Confirmation Message This will affect how ONTs are ranged initially and/or after being OOC. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis ont-range autodisc interval 60 This will affect how ONTs are ranged initially and/or after being OOC. Do you want to continue? y | n >y Command completed successfully Page 451 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Example 2: AXS2200> set chassis ont-range recovery timeout 40 This will affect how ONTs are ranged initially and/or after being OOC. Do you want to continue? y | n >y Command completed successfully Example 3: AXS2200> set chassis ont-range manual This will affect how ONTs are ranged initially and/or after being OOC. Do you want to continue? y | n >y Command completed successfully Error Codes Page 452 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis ont-snauthentication ({enable | disable}) trap-dest (ipaddress-snauth) Description Allows the operator to enable or disable ONT Serial Number authentication. When ONT SN Authentication is enabled, the trap destination IP address must be provisioned to a value that is a valid Class A, B or C address (e.g. must be from 1-223). Usually this IP address is also configured as an existing SNMP trap destination for the OLT. When the feature is enabled, the FSAN serial number of a newly ranged ONT is checked against a central list of authorized ONT FSAN Serial Numbers on the EMS. If it is matched to one on the EMS list, then the ONT is authenticated, and allowed to be provisioned. If it is not matched, then the ONT is automatically put into e-stop. This command is also used to change the trap destination for ONT SN Authentication (by restating again to enable ont-snauthentication, and set a new value for the trap destination). The trap-destination IP address will be remembered when the setting for ont-snauthentication is toggled between enable and disable. To clear the IP address when disabling the feature, set it to 0.0.0.0. Attempts to set ont-snauthentication to enable while the trap destination IP address is set to 0.0.0.0 will be denied. User Privilege Level: Admin Required Parameters: ont-snauthentication disable} {enable | Enables or disables ONT Serial Number authentication. Optional Parameters: trap-dest ipaddress-snauth The trap destination IP address. This is the IP address of the SNMP manager that will receive SNMP traps for ONT SN Authentication. Default Values ont-authentication = disable trap-dest = 0.0.0.0 Confirmation Message This will affect the ability to authenticate ONTs using the serial numbers. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis ont-snauthentication enable trap-dest 127.134.13.130 This will affect the ability to authenticate ONTs using the serial numbers. Do you want to continue? y | n >y Page 453 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Command completed successfully Error Codes IP Address cannot be 0.0.0.0 when ONT Authentication is enabled Invalid IP Address Page 454 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis pppoe-ia ({enable | disable}) Description Enable/disable PPPoE Intermediate Agent on the chassis. When enabled, the PPPoE Intermediate Agent function will be performaned for all ONT members. PPPoE IA does not apply to TLS VLANs, VOIP and Multicast VLANs. User Privilege Level: Superuser Required Parameters: pppoe-ia {enable | disable} The administrative status of PPPoE Intermediate Agent Default Values When this command is not issued, the default state is disable Confirmation Message This will change the administrative status of pppoe-ia. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200>set chassis pppoe-ia enable This will change the administrative status of pppoe-ia. Do you want to continue? y | n >y Command completed successfully Error Codes Page 455 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis pref-mgt-ip (inband | outofband) Description This command allows the user to select which management interface IP address (inband or out-of-band) should be used for certain features which communicate that information with the management systems, e.g. circuit-ID, SNMP Trap PDU insertion of the agent IP address etc... This setting does not in any way impact state of the interfaces and does not validate if an interface has been configured already or correctly. User Privilege Level: Superuser Required Parameters: pref-mgt-ip inband | outofband Allows the user to select which management interface IP address (inband or out-of band) should be used for certain features which communicate that information with the management systems, e.g. circuit-ID, SNMP Trap PDU insertion of the agent IP address etc... This setting does not in any way impact state of the interfaces and does not validate if an interface has been configured already. Default Values outofband Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set chassis pref-mgt-ip inband Command completed successfully Error Codes Invalid interface Page 456 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis sntp (ipaddress) Description This CLI command configures the IP address of the SNTP server. User Privilege Level: Superuser Required Parameters: sntp ipaddress IP address of the SNTP server Default Values 0.0.0.0 Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> set chassis sntp 1.2.3.4 Command completed successfully Error Codes Invalid IP Address Page 457 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis sntpctl ({enable|disable}) Description This CLI command will allow th eoperator to enable or disable SNTP for the OLT. User Privilege Level: Operator Required Parameters: sntpctl {enable|disable} Enables or disables SNTP for the OLT Default Values disable Confirmation Message This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200> set chassis sntpctl enable This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> set chassis sntpctl disable This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Error Codes Page 458 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis syscontact (syscontact) email (address) phone (number) description (text) Description Sets the OLT system contact. Normally is a name of a person, and their contact information (such as phone number, pager, or email) User Privilege Level: Superuser Required Parameters: syscontact syscontact The system contact may be any alphanumeric string up to 232 characters long, plus dashes (-). FOR ANY SPACES that are desired to be entered in this string, use underscores (_), and the system will automatically convert into spaces in the system database. Optional Parameters: email address Email address of the OLT Maintainer (System Contact). String of up to 80 characters using alphanumeric characters, periods ".", at symbols "@" and dashes "-". phone number Telephone number of the OLT Maintainer (System Contact). This can be a string of up to 20 characters using alphanumeric characters, dashes "-" and period ".". description text Descriptive text associated with this object. A string of up to 80 characters using alphanumeric characters plus dash "-" and underscore "_". Default Values null Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> set chassis syscontact John_Doe_phone_800-555-5555_x234_pager_800-5551234_x122345_mainstreet_usa Command completed successfully Error Codes Invalid email address Invalid phone number invalid character syscontact too long Page 459 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis syslocation (syslocation) Description Sets the OLT system location. Typically is the location of the system in the Central Office or Headend facility. User Privilege Level: Superuser Required Parameters: syslocation syslocation The system location may be any alphanumeric string up to 232 characters long, plus dashes (-). FOR ANY SPACES that are desired to be entered in this string, use underscores (_), and the system will automatically convert into spaces in the system database. Default Values null Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> set chassis syslocation 21_Main_Street_Springfield_MM_01123_-_Floor_3 _aisle_22-_bay_2-_rack_2 Command completed successfully Error Codes syslocation too long invalid character Page 460 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis time (time) Description Sets the chassis clock to the specified time. User Privilege Level: Superuser Required Parameters: time time The time must be entered in a hh:mm:ss 24-hour (military clock) format, for example, 14:30:00. Default Values none Confirmation Message This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis time 10:05:00 This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid time Page 461 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis set chassis tz (timezone) Description This command configures the timezone for the OLT. The user may enter the following values: gmt, gmtPlus1, gmtPlus2, gmtPlus3, gmtPlus4, gmtPlus5, gmtPlus6, gmtPlus7, gmtPlus8, gmtPlus9, gmtPlus10, gmtPlus11, gmtPlus12, gmtMin1, gmtMin2, gmtMin3, gmtMin4, gmtMin5, gmtMin6, gmtMin7, gmtMin8, gmtMin9, gmtMin10, gmtMin11, gmtMin12 User Privilege Level: Superuser Required Parameters: timezone tz Sets the desired timezone. Valid values are provided in reference to Greenwich Mean Time (GMT), plus or minus the desired number of hours. - gmt - gmtPlus1 - gmtPlus2 - gmtPlus3 - gmtPlus4 - gmtPlus5 - gmtPlus6 - gmtPlus7 - gmtPlus8 - gmtPlus9 - gmtPlus10 - gmtPlus11 - gmtPlus12 - gmtMin1 - gmtMin2 - gmtMin3 - gmtMin4 - gmtMin5 - gmtMin6 - gmtMin7 - gmtMin8 - gmtMin9 - gmtMin10 - gmtMin11 - gmtMin12 Default Values gmt Confirmation Message This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully. Example(s) Page 462 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Example 1: AXS2200> set chassis tz gmtMin5 This may affect PM data collection. Do you want to continue? y | n >y Command completed successfully Error Codes Page 463 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis show alarm-config entity (entity70) Description Displays the configured alarm level for the requested entity, or all. Reported information includes: - the entity - the severity (sa or nsa) - and the configured level (CR, MJ, MN, NA, NR). User Privilege Level: Operator Optional Parameters: entity entity70 Entity indicates one of the following: - com (common system) - env (environmental) - eqpt (equipment) - eth (ONT Ethernet interface) - gige (OLT gigabit Ethernet interface) - hcna (ONT HCNA interface) - lag (link aggregation group) - moca (ONT MOCA interface) - pon (PON interface) - t0 (voice interface) - t1-vg (Voice Gateway DS1 interface) - vdsl (ONT VDSL2 interface) - video (ONT RF video interface) - voip (ONT Voice over IP interface) Default Values All alarms will be shown If entity is not provided Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show alarm-config =============================================================================== ALARM CONFIG REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Entity -------COM COM COM COM COM COM COM COM COM COM COM Page 464 Condtype -------------------CNTLSWMM CNTLSWMM DBDOWN DBDOWN DBUPGRDFAIL DIGCERT3DAY DIGCERT7DAY DIGCERTEXP FTPCONNDENY IPTVLOCH LHI Severity -------NSA SA NSA SA SA SA SA SA NSA SA SA Level ----MN CR MN CR CR CR MJ CR MN CR MJ AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA COM COM COM COM COM COM COM COM COM COM COM COM COM COM COM ENV ENV ENV ENV ENV ENV ENV EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT Page 465 Provisioning - Chassis LWMEM PWR-A PWR-B RADIUSCOMFAIL SWNA SYNCBITSAIS SYNCBITSLOF SYNCBITSLOS SYNCREFREVSW SYSBKUPFAIL SYSBKUPINV SYSDBTOOBIG SYSMGMTLOL SYSUPGRADEIP TELNETCONNDENY BATDSCHRG BATTERY BATTERYMISS MISC ONTMISC ONTOPENDOOR PWRANDBATT BATTERYPWR CRDFAIL CRDFAIL CRDIMAGEFAIL CRDIMAGEFAIL CRDMM CRDMM CRDRECIP CRDRECIP CRDSFTFL CRDSFTFL EQPT FA FA FANFAIL FANMISS FRCDSW FRCDSW IMPROPRMVL IMPROPRMVL LOCKOUTOFPR LOCKOUTOFPR LOL-A LOL-B NVM-DBMM NVM-MEMFULL NVM-WF NVM-WF ONTAUTOSWFAIL ONTCAPFAIL ONTESTOP ONTESTOPST ONTMM ONTRECFAIL ONTRECFAIL-CF ONTSWNA ONTTXLASER POTSBIAS POTSBIASCRD PWR PWR PWRFANCTL PWRFANCTL PWRMISCINPUT PWRMISCINPUT SFI SFI-A SFI-B SFPINVLD SA NSA NSA SA NSA NSA NSA NSA NSA NSA NSA SA NSA NSA NSA NSA NSA NSA NSA NSA NSA SA SA NSA SA NSA SA NSA SA NSA SA NSA SA SA NSA SA SA SA NSA SA NSA SA NSA SA SA SA NSA SA NSA SA NSA SA SA SA SA SA SA NSA SA NSA NSA NSA SA NSA SA NSA SA SA NSA NSA NSA MJ MN MN CR NA MJ MJ MJ NA MJ MJ CR MJ NA MN MN MN MN MN MN MN MJ MJ MN CR MN CR MN CR MN CR MN CR MJ MN CR MJ MJ MN CR MN CR MN CR MJ MJ MN MJ MJ CR NA MJ MJ MJ MJ MJ MJ NA MJ MN MN MN CR MJ CR MJ CR MJ MN MN MN AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT EQPT ETH ETH GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE HCNA HCNA LAG LAG LAG MOCA MOCA PON PON PON PON PON PON PON PON T0 T0 T0 T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG T1-VG VDSL Page 466 Provisioning - Chassis SFPINVLD SFPRMVD SFPRMVD SFT SFT-BOOTROM SFT-CRDCOM SFT-CRDCOM SFT-VERMM SFT-VERMM SYSAUDITFAIL SYSAUDITFAIL SYSCARDMM SYSSNTPFAIL SYSVERMM TRMT TRMT LOS MACTBLFULLETH AUTONEGOTERR AUTONEGOTERR FE-CREVENT FE-DYINGGASP FE-LOOPBACK FE-TCA-EF FE-TCA-EFP FE-TCA-EFSS FE-TCA-ESP LACPOOSYNC LINKFAIL LINKFAIL LOOPBACK RFI TCA-ERR TCA-F-GEWANRCV TCA-R-GEWANRCV LOS MACTBLFULLHCNA REDCAP0-50 REDCAP100 REDCAP50-99 LOS LOWBW AUTODISCCOLL LOS ONTCHLNOTSET ONTLOS ONTOAM ONTSD PONPWR PONUPGRADEIP SIGTRCLOG SLICCALFAULT SLICCALWARN AIS DL EOC EOCPRI EOCSEC LDSMJ LDSMN LOF LOS LPBKLINE LPBKLINEFE LPBKPAYLOAD LPBKPAYLOADFE RAI TMC TMCPRI TMCSEC VTU-O-LINIT SA NSA SA SA SA NSA SA NSA SA NSA SA NSA NSA SA NSA SA NSA NSA NSA SA NSA NSA SA NSA NSA NSA NSA SA NSA SA SA NSA NSA NSA NSA NSA NSA NSA SA SA NSA NSA NSA SA NSA SA NSA SA SA SA NSA SA NSA SA NSA SA NSA NSA NSA NSA SA SA SA SA SA SA NSA SA NSA NSA NSA CR MN CR MJ MJ MN CR MJ MJ MN CR NA NA MJ MN CR NA MJ MN CR NA NA CR NA NA NA NA CR MN CR CR NA NA MN MN NA MJ MN CR CR NA NA NA CR NA MJ MN MJ CR MJ NA MN NA MJ MJ CR MN MN NA NA MJ MJ NA NA NA NA NA CR MN MN NA AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA VDSL VDSL VDSL VDSL VDSL VDSL VDSL VIDEO VIDEO VIDEO VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP VOIP Provisioning - Chassis VTU-O-LOF VTU-O-LOL VTU-O-LOP VTU-O-LOS VTU-R-LOF VTU-R-LOP VTU-R-LOS LOS-DNSTRM OPTVIDPWR-HIGH OPTVIDPWR-LOW DHCPFAIL-INC DHCPFAIL-NL GETFAIL-AUTH GETFAIL-BP GETFAIL-DN GETFAIL-NOTCP GETFAIL-SFC GETFAIL-TLS GETFAIL-TO MGCOOC RTCPPKTFAIL SIPINVFAIL-AUTH SIPINVFAIL-DN SIPINVFAIL-SFC SIPINVFAIL-TO SIPREGFAIL-AUTH SIPREGFAIL-DN SIPREGFAIL-SFC SIPREGFAIL-TO SUBSCFAIL-AUTH SUBSCFAIL-DN SUBSCFAIL-SFC SUBSCFAIL-TO NSA NSA NSA NSA NSA NSA NSA NSA NSA NSA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA NA NA NA NA NA NA NA MN MN MN MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ MJ =============================================================================== Command completed successfully Example 2: AXS2200> show alarm-config gige =============================================================================== ALARM CONFIG REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Entity -------GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE GIGE Condtype -------------------AUTONEGOTERR AUTONEGOTERR FE-CREVENT FE-DYINGGASP FE-LOOPBACK FE-TCA-EF FE-TCA-EFP FE-TCA-EFSS FE-TCA-ESP LACPOOSYNC LINKFAIL LINKFAIL LOOPBACK RFI TCA-ERR TCA-F-GEWANRCV TCA-R-GEWANRCV Severity -------NSA SA NSA NSA SA NSA NSA NSA NSA SA NSA SA SA NSA NSA NSA NSA Level ----MN CR NA NA CR NA NA NA NA CR MN CR CR NA NA MN MN =============================================================================== Command completed successfully Error Codes Page 467 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis show chassis Description Shows the chassis configuration. Name: OLT name System Contact: user-settable string up to 255 characters in length Note: The output will line-wrap if it exceeds 80 characters. The length is limited to 232 characters in length if set by a CLI command (instead of SNMP). System Location: user-settable string up to 255 characters in length Note: The output will line-wrap if it exceeds 80 characters. The length is limited to 232 characters in length if set by a CLI command (instead of SNMP). System Maintainer Phone: phone number of the OLT maintainer contact System Maintainer Email: email address of the OLT maintainer System Maintainer Remark: Remark System System System System Installer Name: Name of the OLT installer Installer Phone: phone number of the OLT installer Installer Email: email address of the OLT installer Installation Date/Time: Date/Time the Installer set up this OLT (populated when user sets the name and contact info) System Upgrade Status: NoUpgradeIP, UpgradeIP System Upgrade Result: success, failure, null Last Upgrade Completion Time: MM/DD/YYYY HH:MM:SS Default boot version: vx.x Software version in NVM (running): vx.x (Motorola version Vx.y.z) Software version(s) on NVM: Rx.x ONT-Range: autodisc, recovery, manual ONT Auto-Discovery Interval (seconds): the setting between 15-300 ONT Recovery Timeout (hours): the setting between 0-300 ONT Channel Assignment: auto, manual or registration ONT Serial Number Authentication: enable, disable ONT Serial Number Authentication Trap Destination: IP address, or 0.0.0.0 GEM Port Encryption: aes128bits, aes56bits ONT Ethernet Port Loop Detection: enable, disable TCONT Default % of Guaranteed BW for fixed bw component: setting between 10-100 Autonomous Alarms: on or off BulkStats: enabled or disabled Timezone: timezone DST: enabled or disabled SNTP Server: enabled or disabled SNTP Server IP: SNTP server IP address Country Code: (3 letter ISO-3166-alpha3 country code) LACP Priority: 0-65535 (only applies if link aggregation is configured) Forwarding Mode: {isolated, switched} OLT dot1x: Indicates the OLT 802.1x authentication mode (enable, disable) DHCP-Relay: {enable | disable} PPPoE Intermediate Agent: {enable | disable} Circuit-id Format: {aid | tr-156 | cu | tt | flex} Circuit-id Access Node ID: mgmt-IP, or a user-defined ASCII string, or "n/a" if the circuit-id format is "flex" Mac Age (seconds): 0-65535 CLI Authentication: olt, radius_olt Multicast Source Guard: enable/disable DHCP Guard: enable/disable Multicast/Broadcast/Unicast Rate (pps): {0, 1-488,281}, where 0 = no limit TDM-Mode: DS1, E1 Flapping Alarm Monitoring Monitoring for ont-flapping-alarms: active, inactive (default active) Page 468 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Flap suppression time (seconds): 5-900 (default 120) Management Default gateway IP address: xxx.xxx.xxx.xxx Pref. Management IP Address: inband | out-of-band Out-of-Band: MTU Size: 1500 octets (fixed) Active Port: sys-a-enet-mgt1, or sys-b-enet-mgt1 Port Oper Status: up, or down IP Address: xxx.xxx.xxx.xxx Mask: xxx.xxx.xxx.xxx (shown in dotted decimal notation) Mode: configured setting for mode (auto). It will additionally display the operating mode in parentheses (10half, 10full, 100half, 100full, n/a) MAC Address: xx-xx-xx-xx-xx-xx Standby Port: sys-b-enet-mgt1 Port Oper Status: up, down or unknown (unknown indicates that the hardware does not support the capability to report it) Mode: configured setting for mode (auto). It will additionally display the operating mode in parentheses (10half, 10full, 100half, 100full, or n/a if the hardware doesn't support the capability to report it) Port: sw-a-enet-mgt1 (Video return path only) Port Operstatus: up, or down IP Address: xxx.xxx.xxx.xxx Mask: xxx.xxx.xxx.xxx (shown in dotted decimal notation) Mode: configured setting for mode (auto). It will additionally display the operating mode in parentheses (10half, 10full, 100half, 100full) MAC Address: xx-xx-xx-xx-xx-xx In-Band: IP Address: xxx.xxx.xxx.xxx Mask: xxx.xxx.xxx.xxx MAC Address: xx-xx-xx-xx-xx-xx VLAN Tag: svid Default ONT software version for each ONT type. These are the versions that are downloaded when the ONT is first discovered. User Privilege Level: Operator Default Values none Confirmation Message Command Completed Successfully Example(s) Example 1: AXS2200> show chassis =============================================================================== CHASSIS REPORT DATE: 7/28/2006 TIME: 20:15:40 =============================================================================== Name: Chicago_Main SysContact: John Doe - Phone 800-555-5555 x234 - Pager 800-555-1234 x122345 -OR- Jane Smith Page 469 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis - Phone 800-555-5555 x222 - Pager 800-555-1234 x100000 - Office Address 621 Main Street Springfield, USA 00000 SysLocation: Springfield21 Site - 621 Main Street Springfield MM 01123- Floor 3, aisle 22, bay 2, rack 2 System Maintainer Phone: 978-555-1212 System Maintainer Email:
[email protected] System Maintainer Remark: Only_alpha-numeric_and_dash_and_underscore_ can_be_used _here_for_up_to_80_chars System System System System Installer Name: abced Installer Phone: 43-2943-34329-4r3 Installer Email:
[email protected] Installation Date/Time: 05/25/2010 15:09:31 System Upgrade Status: NoUpgradeIP System Upgrade Result: success Last Upgrade Completion Time: 7/28/2006 08:10:12 Default boot version: R1_1 Software version in NVM (running): R5_0_0 (Motorola version R5_0_0) Software Version(s) on NVM: 1. R7_0_0 2. R6_1_0 3. R6_0_1 4. R5_0_0 ONT-Range: autodisc ONT Auto-Discovery Interval (seconds): 30 ONT Recovery Timeout (hours): 0 ONT Channel Assignment: auto ONT Serial Number Authentication: disable ONT Serial Number Authentication Trap Destination: 0.0.0.0 GEM Port Encryption: aes128bits ONT Ethernet Port Loop Detection: enable TCONT Default % of Guaranteed BW for fixed bw component: 100 % Autonomous alarms: on BulkStats: enabled Timezone: gmtPlus5 DST: enabled SNTP Server: enabled SNTP Server IP: 1.2.3.4 Country Code: PAK LACP Priority: 32768 Forwarding Mode: isolated OLT dot1x: disable DHCP-Relay: enable PPPoE Intermediate Agent: disable Circuit-id Format: aid Circuit-id Access Node ID: NewEngland-Boston-OLT101 Mac Age (seconds): 65535 CLI Authentication: olt Multicast Source Guard: disable DHCP Guard: disable Multicast/Broadcast/Unicast Rate (pps): 500 TDM-Mode: DS1 Flapping Alarm Monitoring Monitoring for ont-flapping-alarms: active Flap suppression time: 120 seconds Management Default gateway IP address: 192.1.1.1 Pref. Management IP address: out-of-band Out-of-Band: MTU Size: 1500 octets Active Port: sys-a-enet-mgt1 Port Oper Status: up IP Address: 72.16.16.16 Mask: 255.255.0.0 Mode: auto (100full) MAC Address: 00-30-2d-11-22-33 Page 470 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Chassis Standby Port: sys-b-enet-mgt1 Port Oper Status: down Mode: auto (n/a) Port: sw-a-enet-mgt1 (Video Return Path only) Port Operstatus: up IP Address: 110.10.10.1 Mask: 255.255.0.0 Mode: auto (100full) MAC Address: 00-30-2d-11-22-44 In-Band: IP Address: Mask: MAC Address: VLAN: n/a n/a n/a n/a Default ONT Software Versions: MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC MRCC ont1000gt ont1000gt2 ont1000gt3 ont1100ge ont1120ge ont1400gt ont1420gt ont1400gt2 sf21000 sf24210 sf24200 sf24200b wg24200g ont1500gt ont6000get ont6000gvt md22000 md24000 md26000 wt21004 wg24200n disable R5_0_0 R6_0_2 R6_0_0 R6_2_0 R6_1_0 R7_0_0 R7_1_0 R7_1_0 R7_1_0 R7_1_0 R7_2_1 R7_2_0 disable R5_0_0 R5_0_0 R7_2_1 R7_2_1 R7_2_0 R7_2_0 R7_3_0 =============================================================================== Command completed successfully Error Codes Page 471 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 472 Provisioning - Chassis AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - CLI Provisioning - CLI set cli baud (baud-rate) Description Sets the baud rate of the local console port. This is a global setting, and will therefore affect all users. User Privilege Level: Operator (basic CLI) Required Parameters: baud baud-rate Sets the baud-rate to one of the following values: 1200, 2400, 4800, 9600, 19200, or 38400 Default Values 9600 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set cli baud 38400 Command completed successfully Error Codes Page 473 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - CLI set cli inact-timeout (minutes) Description Sets the CLI inactivity timeout to the specified number of minutes. If the logged in user has not used the CLI in the specified time period, the CLI will log the user off. This is a global setting, and will therefore affect the inactivity timeout for all users. The change takes effect upon new logins to the system. This command requires a user that has privilege level set to admin. User Privilege Level: Admin Required Parameters: inact-timeout minutes Specifies the timeout value between 0 and 60 minutes. If 0 is used, it will disable the timeout feature (i.e. it will never time out). Default Values 10 minutes Confirmation Message Command completed successfully Example(s) Example: AXS2200> set cli inact-timeout 10 Command completed successfully Error Codes Invalid timeout specification Page 474 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - CLI set cli lines (lines-per-page) Description Sets the number of lines to scroll when paging output. This command sets the amount of lines displayed for the individual username that issued the command. Note: In the case of RADIUS authentication this setting is only affecting the current login session, NOT the user account setting. User Privilege Level: Operator (basic CLI) Required Parameters: lines lines-per-page This is the number of lines to display when paging CLI output, before prompting to quit or continue. The value must be in the range 14-100, or 0. (0 will disable the paging feature). Default Values 24 lines per page Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set cli lines 30 Command completed successfully Error Codes Invalid lines per page specification Page 475 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - CLI show cli Description Lists the CLI settings, described as follows: CLI baud rate: Displays the baud rate (global system setting) Login timeout: Displays the login timeout value in minutes (global system setting) Lines per page: Displays screen size used when paging output (actual value of the current session ) User Privilege Level: Operator (basic CLI) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show cli =============================================================================== CLI REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== CLI baud rate: 9600 Login timeout: 5 minutes Lines per page: 24 =============================================================================== Command completed successfully Error Codes Page 476 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 477 Provisioning - CLI AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection Provisioning - Equipment Protection set eqptsw clear (slot) Description Clears previously user-configured equipment switch conditions (for example, a force switch). For example, au-1 is used to clear user-initiated equipment protection switch requests for the au-1/2 redundant slot pair. Likewise, sw-a is used to clear user-initiated equipment protection switch requests for the sw-a/b pair. User Privilege Level: Operator Required Parameters: clear slot Indicates the slot pair that will have the equipment protection switch cleared: - au-1 (for au-1/au-2 pair) - au-3 (for au-3/au-4 pair) - sw-a (for sw-a/sw-b pair) Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set eqptsw clear sw-a Command completed successfully Example 2: AXS2200> set eqptsw clear au-2 Command completed successfully Error Codes Operation not supported for this card type Card not protected Invalid slot Page 478 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection set eqptsw force to (slot) Description Performs a forced switch to the specified slot. The switch will succeed regardless of the health of the incoming signals to the switch-to card. The switch command will not succeed if the switch-to card equipment is failed. For the Switch card with GigE uplinks, the equipment switch has no impact on the port services; the GigE ports are not protected, and independently carry services on the cards in SW-A and SW-B slots. User Privilege Level: Operator Required Parameters: force to slot Indicates the slot of the equipment protection pair to carry service with an equipment switch priority of forced. Valid slots are: - au-{1-4} - sw-{a,b} Default Values none Confirmation Message This will force the protected equipment in the slot to be active. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set eqptsw force to au-2 This will force the protected equipment in the slot to be active. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> set eqptsw force to au-1 This will force the protected equipment in the slot to be active. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid slot Card not protected Invalid request, higher order protection request in effect Operation not supported for this card type Page 479 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection set eqptsw lockout (slot) Description Sets a lockout of equipment protection. Upon execution of the command, the card in the working slot is prevented from switching to the card in the protection slot. If the protection card is currently the active card, this command forces the service to revert to the working card. This switch will succeed regardless of the health of the incoming signals to the working card or of the health of the working card (e.g. sw-a or au-1). For example, when au-2 is selected, a user-initiated lockout of protection request is applied to the au-1/2 redundant slot pair (lockout protection = lockout of au-2) Note: for the Switch card with GigE uplinks, the equipment lockout has no impact on the port services; the GigE ports are not protected, and independently carry services on the cards in SW-A and SW-B slots. User Privilege Level: Operator Required Parameters: lockout slot Indicates the protection slot for a protected slot pair. This slot will have an equipment switch priority of "lockout protection" applied to it (meaning it will not carry service even if there are failures on the card in the working slot). Valid slots are: - au-2 (for locking out AU-2 in the AU-1/AU-2 pair) - au-4 (for locking out AU-4 in the AU-3/AU-4 pair) - sw-b (for locking out SW-B in the SW-A/ SW-B pair) Default Values none Confirmation Message This will prevent the protected equipment in the slot from being active. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set eqptsw lockout sw-b This will prevent the protected equipment in the slot from being active. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> set eqptsw lockout au-2 This will prevent the protected equipment in the slot from being active. Do you want to continue? y | n Page 480 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection >y Command completed successfully Error Codes Operation not supported for this card type Invalid slot Card not protected Page 481 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection set eqptsw manual to (slot) Description Performs a manual switch to the specified slot unless a higher priority request (i.e. equipment switch lockout or force, or equipment failure) is in effect. For the Switch card with GigE uplinks, the manual equipment switch does not check the health of the incoming GigE WAN signals since they independently carry services on the cards in SW-A and SW-B slots. Manual switches are treated as transient events and do not require the user to clear them. Note: For the voice gateway card, manual switches are not permitted while calls are being replicated from an equipment switch that was just executed. The call replication process will complete within approximately one minute. After that time, manual equipment switches are allowed. Note: For system controller cards, a manual switchover will reset both controller cards. User Privilege Level: Operator Required Parameters: manual to slot Indicates the slot of an equipment protected slot pair to become active with a priority of manual. Valid slots are: - au-{1-4} - sw-{a,b} - sys-{a,b} Default Values none Confirmation Message Command completed successfully (If the slot is SYS-A or SYS-B, then a different confirmation is used:) This command will reset the controller. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set eqptsw manual to au-1 Command completed successfully Example 2: (switch card) AXS2200> set eqptsw manual to sw-b Command completed successfully Page 482 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection Example 3: (system controller card) AXS2200> set eqptsw manual to sys-b This command will reset the controller. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid - Destination controller is failed Invalid request, higher order protection request in effect Call replication process currently prevents this operation Invalid - Destination card is experiencing an interface failure Invalid slot Card not protected Page 483 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection show eqptsw Description Displays the current equipment protection status of all cards, described as follows: Slot: The slot in which cards that support equipment protection are installed. Card: Displays the type of card. Status: Displays the current equipment protection status of the card (active, standby, unavail, unprot) NOTE: standby switch cards may still be supporting unprotected services on the WAN ports, even though the switch fabric is standby. Mode: Displays the protection status of the card (0x1, 1+1). Companion: Displays the other companion slot in the 1+1 eqpt slot pair. W/P: Displays whether the slot is considered to be the Working (W) or Protection (P) slot in the 1+1 eqpt protection pair. Highest EQPT SW Request: Only applies to 1+1 slots. If the slot pair has a currently active protection switch request, this field for the slot that is not active will display the switch priority. This field can take the values: lockout, forced, manual, eqpt removed/fail. If there is no active equipment switch request, nothing is shown. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show eqptsw =============================================================================== EQUIPMENT PROTECTION REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Slot ----au-1 au-2 au-3 au-4 au-5 au-6 au-7 au-8 au-9 sw-a sw-b au-10 au-11 au-12 au-13 au-14 au-15 au-16 au-17 au-18 sys-a sys-b Card ----------AVGC AVGC AGPONC AGPONC AGPONC AGPONC AGPONC AGPONC AGPONC ASW200D ASW200D AGPONC AGPONC ASYSA - Status ------active standby unprot unprot unprot unprot unprot unprot unprot standby active unprot unprot Mode ---1+1 1+1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 1+1 1+1 0x1 0x1 Companion --------au-1 au-2 sw-b sw-a - active 0x1 - W/P --W P Highest EqptSw Request ---------------------forced W P =============================================================================== Page 484 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Equipment Protection Command completed successfully Example 2: AXS2200> show eqptsw =============================================================================== EQUIPMENT PROTECTION REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Slot ----au-1 au-2 au-3 au-4 au-5 au-6 au-7 au-8 au-9 sw-a sw-b au-10 au-11 au-12 au-13 au-14 au-15 au-16 au-17 au-18 sys-a sys-b Card ----------AVGC AVGC AGPONC AGPONC AGPONC AGPONC AGPONC AGPONC AGPONC ASW200D ASW200D AGPONC AGPONC ASYSC ASYSC Status ------active standby unprot unprot unprot unprot unprot unprot unprot standby active unprot unprot Mode ---1+1 1+1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 1+1 1+1 0x1 0x1 Companion --------au-1 au-2 sw-b sw-a - active standby 1+1 1+1 sys-b sys-a W/P --W P W P Highest EqptSw Request ---------------------- forced =============================================================================== Command completed successfully Example 3: AXS2200> show eqptsw =============================================================================== EQUIPMENT PROTECTION REPORT DATE: 06/01/2008 TIME: 16:08:22 =============================================================================== Slot ----au-1 au-2 au-3 au-4 au-5 au-6 au-7 au-8 au-9 sw-a sw-b au-10 au-11 au-12 au-13 au-14 au-15 au-16 au-17 au-18 sys-a Page 485 Card ----------AVGC AVGC AGPOND AGPOND AGPOND AGPOND AGPOND AGPOND AGPOND ASW200D ASW200D AGPOND AGPOND ASYSD Status ------active standby unprot unprot unprot unprot unprot unprot unprot standby active unprot unprot Mode ---1+1 1+1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 1+1 1+1 0x1 0x1 Companion --------au-1 au-2 sw-b sw-a - active 1+1 sys-b W/P --W P W P Highest EqptSw Request ---------------------- forced AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA sys-b Provisioning - Equipment Protection ASYSD standby 1+1 sys-a =============================================================================== Command completed successfully Error Codes Page 486 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 487 Provisioning - Equipment Protection AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group Provisioning - Link Aggregation Group add port gige (slot-port) lagroup (lagid) Description Adds a Gigabit Ethernet port to the Link Aggregation Group. A port can be added to a link aggregation group only if it has no connections defined to it, and if there is no IP layer or MAC layer Access Control List applied. Up to 8 links can be supported on a single aggregation group. The stag-ethertype for all links must be the same. User Privilege Level: Superuser Required Parameters: slot-port gige Identifies the GigE port. lagroup lagid Indicates the particular link aggregation group (lag-{1-128}. Example: lag-100 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> add port gige sw-a-1 lagroup lag-1 Command completed successfully Example 2: AXS2200> add port gige au-11-1 lagroup lag-1 Command completed successfully Error Codes VLAN-stag-ethertype must be the same as the other gige links AID is member of RSTP Connections defined - delete first Invalid interface Port already in this link aggregation group Maximum number of ports already added to the LAG Invalid LAG address Port already in another link aggregation group Port already assigned to another Service Access Control List configured - delete first Page 488 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group del lagroup (lagaddress) Description Deletes a link aggregation group. There must not be any connections defined to this group, and it must not be associated with a multicast VLAN in order for the command to succeed. Note: If the link aggregation group is assigned to a multicast VLAN, the multicast VLAN must be deleted first before the group can be deleted. User Privilege Level: Superuser Required Parameters: lagaddress Indicates the Link Aggregation Group address. The format is: lag-index where index takes a value from 1 to 128 Default Values none Confirmation Message This will delete the link aggregation group permanently. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del lagroup lag-1 This will delete the link aggregation group permanently. Do you want to continue? y | n > y Command completed successfully Error Codes Connections defined - delete first Invalid LAG address Link Aggregation Group is assigned to a multicast VLAN Invalid - security-radius vlan exists AID is member of RSTP MEP(s) exist on the Link Aggregation Group Page 489 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group del port gige (slot-port) lagroup (lagid) Description Deletes the Gigabit Ethernet port from the link aggregation group, reducing the capacity of the group. At least one port has to remain on a link aggregation group if there are connections and/or MEPs defined User Privilege Level: Superuser Required Parameters: slot-port gige Identifies the GigE port. lagroup lagid Indicates the particular link aggregation group (lag-{1-128}. Example: lag-100 Default Values none Confirmation Message This command will remove the link from the LAG permanently. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del port sw-a-1 lagroup lag-1 This command will remove the link from the LAG permanently. Do you want to continue? y | n > y Command completed successfully Example 2: AXS2200> del port au-11-1 lagroup lag-1 This command will remove the link from the LAG permanently. Do you want to continue? y | n > y Command completed successfully Error Codes MEP(s) exist on the Link Aggregation Group Insufficient connection bandwidth Connections defined - delete first Invalid link Invalid link aggregation group Invalid - security-radius vlan exists Invalid - Cannot remove all ports from an RSTP member LAG Page 490 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group set chassis lacp sysprio (value) Description Sets the LACP system priority value for the chassis (used for link aggregation). To view the setting, consult the "show chassis" report. User Privilege Level: Superuser Required Parameters: lacp sysprio value Sets the LACP system priority level. Valid valies are from 0 - 65535. Default Values system priority = 32768 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set chassis lacp sysprio 10100 Command completed successfully Error Codes Invalid priority Page 491 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group set lagroup (lagaddress) name (name) lacpmode ({disabled | active}) Description Defines a new Link Aggregation Group, and assigns a name to it. Up to 8 link aggregation groups are supported by the OLT. An optional parameter lacpmode defines the mode of operation, either in active mode per 802.3 Clause 43 or disabled whereby no LACP is used. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. lagaddress Indicates the Link Aggregation Group address. The format is: lag-index where index takes a value from 1 to 128 Optional Parameters: lacpmode {disabled | active} Sets the mode for LAG operation. For LAG setups with partners, which do not support LACP, lacpmode can be set to "disabled" in which case no LACPDUs will be sent out or responded to by the OLT member ports. Default Values lacpmode=active Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set lagroup lag-1 name silvergroup Command completed successfully Example 2: (LAG creation with LACP mode set to disabled) AXS2200> set lagroup lag-1 name oachkatz lacpmode disabled Command completed successfully Page 492 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group Error Codes Link aggregation group already defined Maximum number of Link Aggregation Groups already defined Invalid name Name already in use Invalid LAG address Invalid LACP mode Page 493 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group set lagroup-config (lagaddress) state ({enable | disable}) Description Sets the administrative state for the Link Aggregation Group. User Privilege Level: Superuser Required Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). lagaddress Indicates the Link Aggregation Group address. The format is: lag-index where index takes a value from 1 to 128 Default Values enable Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200>set lagroup-config lag-1 state disable This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid LAG address Link Aggregation Group has no GigE ports assigned as members Page 494 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group set port gige (slot-port) lacptimeout (value) lacpportprio (value) Description Sets the Link Aggregation Control Protocol (LACP) timeout state and/or the port priority for the Gigabit Ethernet port. Only applies to ports that participate in a link aggregation group. User Privilege Level: Superuser Required Parameters: gige slot-port Identifies the GigE port. Optional Parameters: lacptimeout value Specifies the LACP timeout state. Valid values are long or short. lacpportprio value Sets the LACP Port Priority. Takes a value from 0 - 65535. Default Values lacptimeout= long port priority = 32768 Confirmation Message Command completed successfully Example(s) Example 1: (all settings set) AXS2200> set port gige sw-a-1 lacptimeout short lacpportprio 20000 Command completed successfully Example 2: (one settings set) AXS2200> set port gige sw-a-1 lacptimeout short Command completed successfully Example 3: (gige port on Ethernet card) AXS2200> set port gige au-11-1 lacptimeout short Command completed successfully Page 495 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group Error Codes Port does not belong to a link aggregation group Invalid port priority At least one attribute is required to be set Invalid LACP mode Invalid LACP timeout Page 496 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group show lacp gige (slot-port) Description Displays the LACP settings for the GigE link. Only applies to GigE ports that are members of a link aggregation group. Reported information includes: Actor System Priority Actor System (MAC Address) Actor Key Actor Port Priority Actor Port Actor State: LACP Activity: disabled, active, passive LACP Timeout: long, short Aggregation: true, false Synchronization: true, false Collecting: true, false Distributing: true, false Defaulted: true, false Expired: true, false Partner Information Length Partner System Priority Partner System (MAC Address) Partner Key Partner Port Priority Partner Port Partner State: LACP Activity: active, passive LACP Timeout: long, short Aggregation: true, false Synchronization: true, false Collecting: true, false Distributing: true, false Defaulted: true, false Expired: true, false Collector Max Delay: n (Note: This is a chassis-wide setting and, while already available at the OLT level commands and EMS screen, was added to this CLI command for troubleshooting convenience) User Privilege Level: Operator Required Parameters: gige slot-port Identifies the GigE port. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show lacp gige sw-a-1 Page 497 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group =============================================================================== LACP Report DATE: 8/25/2005 TIME: 20:15:40 =============================================================================== Port: sw-a-1 Actor System Priority: 32768 Actor System: 00:01:23:45:67:89 Actor Key: 16820 Actor Port Priority: 28965 Actor Port: 234 Actor State: LACP Activity: active LACP Timeout: long Aggregation: true Synchronization: true Collecting: true Distributing: false Defaulted: false Expired: false Partner Information Length: 20 Partner System Priority: 32760 Partner System: AA:99:88:77:66:55 Partner Key: 16820 Partner Port Priority: 28965 Partner Port: 763 Partner State: LACP Activity: active LACP Timeout: long Aggregation: true Synchronization: true Collecting: true Distributing: false Defaulted: true Expired: false Collector Max Delay: 20 usec =============================================================================== Command completed successfully Error Codes Invalid port Port does not belong to a link aggregation group Page 498 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group show lagroup (lagaddress) Description Displays the settings for an individual link aggregation group. Reported parameters are: - Group Address: (lag-n) - Name: The user given name for the group - Admin State: The adminstrative state for the group (enable, disable) - Oper State: The operating state for the group (up, down) - Load Balance: The type of loadbalancing that is used - Group MAC Address - MSTP member: (yes | no) Denotes if the LAG has been added to MSTP - Hello Time (Cfg): configured hello time if MSTP member, "n/a" if not - Hello Time (Current): actual hello time if MSTP member, "n/a" if not - Broadcast/Unknown Unicast rate limit (pps): chassis-bmc-rate, 0-14880952 - ACL-IP: The name of the applied IP layer Access Control List. - ACL-MAC: The name of the applied MAC layer Access Control List. - For each Gigabit Ethernet member of the link aggregation group, the port address, the admin state, the oper state, the LACP mode, and the LACP timeout settings are displayed. In addition, each link indicates the current loopback state {none, ne (for near end), fe (for far end)} For more configuation settings on individual Gigabit Ethernet ports, consult the commands "show port gige" and "show port gige-oam". User Privilege Level: Operator Required Parameters: lagaddress Indicates the Link Aggregation Group address. The format is: lag-index where index takes a value from 1 to 128 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show lagroup lag-1 =============================================================================== Link Aggregation Group Individual Report DATE: 8/25/2005 TIME: 20:15:40 =============================================================================== Name: alpha Admin State: enable Oper State: up LoadBalance: srcmac+destmac Group MAC Address: 00-01-23-45-67-89 MSTP member: no Hello Time (Cfg): Hello Time (Current): Broadcast/Unknown Unicast rate (pps): chassis-bmc-rate Page 499 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group ACL-IP: qbdef ACL-MAC: qbdef Port ------sw-a-2 sw-a-3 sw-b-3 sw-b-4 Admin State -------enable enable enable enable Oper State ----up up up down LACP Mode --------active active active active LACP Timeout -----------short long long long Loopback state -----none none none ne =============================================================================== Command completed successfully Error Codes Link Aggregation group not defined Invalid LAG address Page 500 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Link Aggregation Group show lagroup all Description Displays the configuration settings for all Link Aggregation Groups. Reported parameters are: - Collector Max Delay: value in microseconds (us) -- used for all groups - Group Address: (lag-n) - Name: The user given name for the group - Admin State: The adminstrative state for the group (enable, disable) - Oper State: The operating state for the group (up, down) - Load Balance: The type of loadbalancing that is used - MSTP member: Denotes if a LAG has been added to an RSTP Instance User Privilege Level: Operator Required Parameters: all Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show lagroup all =============================================================================== Link Aggregation Group Summary Report DATE: 8/25/2005 TIME: 20:15:40 =============================================================================== Collector Max Delay: Group ------lag-1 lag-2 lag-128 20 us Name -------------------alpha beta delta Admin State ------enable enable disable Oper State -----up up down LoadBalance -------------------srcmac+destmac scrmac+destmac scrmac+destmac MSTP member ------no no no =============================================================================== Command completed successfully Error Codes Page 501 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 502 Provisioning - Link Aggregation Group AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Provisioning - MSTP add mstp olt (lag | gigeport) Description Allows the user to add a specific port or LAG to the MSTP protocol. User Privilege Level: Superuser Required Parameters: olt lag | gigeport AID of a Link Aggregation group or GigE port Default Values Confirmation Message Command completed successfully Example(s) Example 1: (LAG) AXS2200> add mstp olt lag-23 Command completed successfully Example 1: (GigE port) AXS2200> add mstp olt sw-a-3 Command completed successfully Error Codes Spanning Tree cannot be enabled on a mirroring destination port Invalid AID Port already a member of MSTP Invalid, port belongs to LAGroup Page 503 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP add mstp instance instid (id) priority (num) vlan (vlan-range) Description Allows the user to explictly add an MSTP instance to the system. This instance can then be used for mapping VLANs to it. Changes to the VLAN set can be made at any time using the set mstp instance command. The explictly added instance can be labeled with an ID between 1 and 63. User Privilege Level: Superuser Required Parameters: id instid Defines the MSTP instance ID to be used for this particular instance. Range: 0 - 63 Total number of instances cannot exceed 64. Instance ID = 0 (the Common Instance) is always present. Optional Parameters: num priority Defines behavior as to the root bridge selection for the specified MSTP instance. num: Number from 0 - 61440. The bridge priority can be set in increments of 4096 only, valid values are 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, and 61440. vlan vlan-range Allows the user to specify a single VLAN, multiple VLANs via comma-separated lists or VLAN ranges via dash-separated values to be part of the MSTP instance or to be removed from it if it already exists. Total range of VIDs, which can be used is 2 - 4094 Default Values priority=32768 vlan=empty Confirmation Message Command completed successfully Example(s) Example 1: (with optional VLAN range supplied) AXS2200> add mstp instance instid 4 vlan 10-20 Command completed successfully Page 504 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Example 2: (Instance was already created earlier) AXS2200> add mstp instance instid 4 MSTP instance already exists Command completed successfully Error Codes Invalid priority Invalid VLAN input MSTP instance already exists Page 505 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP add mstp vlan instid (id) vlan (vlan-range) Description Allows the user to add a set of VLANs to a specific MSTP instance. If the VLANs specified are already in another MSTP instance, they will be moved to the instance specified in this command and therefore disappear from the VLAN set of the previous instance mapped to the VLAN set. An instance ID of 0 is not allowed for this command. If a user wants to make a VLAN or set of VLANs part of the CST again (typically after it was mapped to an MST), he can use the delete command version on the MST, whiich currently has the VLAN(s) mapped. The MSTP instance specified has to exist or the command will be rejected. User Privilege Level: Superuser Required Parameters: instid id Defines the MSTP instance ID to be used for this particular instance. Range: 0 - 63 Total number of instances cannot exceed 64. Instance ID = 0 (the Common Instance) is always present. vlan vlan-range Allows the user to specify a single VLAN, multiple VLANs via comma-separated lists or VLAN ranges via dash-separated values to be part of the MSTP instance or to be removed from it if it already exists. Total range of VIDs, which can be used is 2 - 4094 Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> add mstp vlan instid 3 vlan 1,2,4-7 Command completed successfully Example 2: AXS2200> add mstp vlan instid 0 vlan 1 Invalid MSTP Instance Command completed successfully Page 506 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Error Codes Invalid MSTP instance Invalid VLAN Range Page 507 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP del mstp olt (lag | gigeport) Description Allows the user to remove a specific port or LAG from the MSTP protocol running on the OLT. User Privilege Level: Superuser Required Parameters: olt lag | gigeport AID of a Link Aggregation group or GigE port Default Values Confirmation Message Example(s) Example 1: AXS2200>del mstp olt lag-1 Command completed successfully Example 2: AXS2200>del mstp olt au-11-1 Command completed successfully Error Codes Invalid AID Not a member of MSTP Page 508 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP del mstp instance instid (id) Description Allows the user to remove an explcitly created MSTP instance from the system. Any VLANs mapped to this instance will be moved back to the common instance 0. User Privilege Level: Superuser Required Parameters: instid id Defines the MSTP instance ID to be used for this particular instance. Range: 0 - 63 Total number of instances cannot exceed 64. Instance ID = 0 (the Common Instance) is always present. Default Values n/a Confirmation Message This will delete the MSTP instance and remove any VLANs mapped to it. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del mstp instance instid 4 This will delete the MSTP instance and move any VLANs mapped to it to instance 0. Do you want to proceed? y | n >y Command completed successfully Error Codes MSTP instance not found Page 509 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP del mstp vlan instid (id) vlan (vlan-range) Description Allows the user to remove a set of VLANs from a specific MSTP instance. VLANs removed from the specific instance will automatically be made part of the Common Instance. The instance ID specified for this command cannot be 0 (CST). User Privilege Level: Superuser Required Parameters: instid id Defines the MSTP instance ID to be used for this particular instance. Range: 0 - 63 Total number of instances cannot exceed 64. Instance ID = 0 (the Common Instance) is always present. vlan vlan-range Allows the user to specify a single VLAN, multiple VLANs via comma-separated lists or VLAN ranges via dash-separated values to be part of the MSTP instance or to be removed from it if it already exists. Total range of VIDs, which can be used is 2 - 4094 Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del mstp vlan instid 4 vlan 2-7 Command completed successfully Error Codes Invalid MSTP instance Invalid VLAN Range Page 510 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP set mstp instance instid (id) priority (num) Description Allows the user to modify the root Priority for a specific MSTP instance. The instance has to exist for this command to succeed. User Privilege Level: Superuser Required Parameters: num priority Defines behavior as to the root bridge selection for the specified MSTP instance. num: Number from 0 - 61440. The bridge priority can be set in increments of 4096 only, valid values are 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, and 61440. instance instid id Defines the MSTP instance ID to be used for this particular instance. Range: 0 - 63 Total number of instances cannot exceed 64. Instance ID = 0 (the Common Instance) is always present. Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set mstp instance instid 2 priority 0 Command completed successfully Error Codes Invalid MSTP instance Invalid priority MSTP instance not found Page 511 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP set mstp olt (lag | gigeport) instid (id) pathcost (cost) portpriority (priority) Description Allows the user to define Path Cost and Port Priority for a specific instance and physical port. Note: The port in question has to be added to the MSTP protocol first using the add mstp command. At least one attribute has to be set. User Privilege Level: Superuser Required Parameters: olt lag | gigeport AID of a Link Aggregation group or GigE port id instid Defines the MSTP instance ID to be used for this particular instance. Range: 0 - 63 Total number of instances cannot exceed 64. Instance ID = 0 (the Common Instance) is always present. Optional Parameters: pathcost cost RSTP Path Cost of Link (1 - 200,000,000) portpriority priority xSTP Port Priority (0-240, steps of 16) Default Values pathcost=derived from link speed portpriority=128 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set mstp olt au-5-3 instid 2 pathcost 20000 portpriority 16 Command completed successfully Page 512 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Error Codes Invalid port. At least one attribute is required to be set Invalid MSTP instance Invalid path cost Invalid port priority Port has to be added to MSTP first Page 513 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP set mstp protocol state (enable | disable) hello-time (seconds) forward-delay (seconds) maxage (seconds) txhold (count) maxhops (count) vendormode (std | cisco) Description Allows the user to enable or disable the MSTP protocol and also set the Bridge helloTime, forwardDelay, maxAge, maxHops and vendormode parameters. The OLT will enforce the following relationships: 2 × (Forward_Delay – 1.0 seconds) >= Max_Age Max_Age >= 2 × (Hello_Time + 1.0 seconds) The vendormode of "standard" or "cisco" drives behavior when the OLT is connected to Cisco switches, which are running a pre-standard version of MSTP. This depends on the IOS release and affects Cisco software versions prior to 12.2(25) SEC. A setting of "standard" is default and will apply to standard (802.1s / 802.1Q-2005+) implementations of MSTP on partner switches independent of the vendor or model. User Privilege Level: Superuser Required Parameters: protocol Optional Parameters: count txhold Transmit Hold Count for the RSTP instance. valid Range is 1-10 hello-time seconds The interval between periodic transmissions of Configuration Messages by Designated Ports. Range: 1 - 10 Default: 2 forward-delay seconds The delay used by STP Bridges to transition Root and Designated Ports to Forwarding. Range: 4 - 30 Default: 15 maxage seconds The maximum age of the information transmitted by the Bridge when it is the Root Bridge. Range: 6 - 40 Default: 20 maxhops count This defines the initial value of remainingHops for MSTI information generated at the boundary of an MSTI region. Range: 6 - 40 Page 514 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Default: 20 state enable | disable Allows the operator to enable or disable use of the Spanning Tree Protocol vendormode std | cisco Allows to select the mode which the MSTP protocol is using in order to achieve interoperability with vendors, which offer variations in terms of 802.1Q-2005 adherence. Choices are std (802.1Q-2005) cisco (Cisco MST) Default Values state=disable hello-time=2 forward-delay=15 maxage=20 maxhops=20 vendormode=std Confirmation Message Command completed successfully Example(s) Example 1: (Setting a few timers) AXS2200> set mstp protocol hello-time 2 maxage 7 Command completed successfully Example 1: (Setting the vendormode to cisco for Interoperability reasons) AXS2200> set mstp protocol vendormode cisco Command completed successfully Error Codes Invalid forwarding delay Invalid hello time Invalid max age Invalid maxhops Invalid state value Page 515 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP set mstp region name (cfgname) revision (number) Description This command allows the user to set the MST region name and configuration revision number as per IEEE 802.1Q-2005 Section 13.7. User Privilege Level: Superuser Required Parameters: region Optional Parameters: cfgname name Region Configuration name. NUL-padded String of up to 32 characters defining the MST region identity revision number Defines the configuration revision. Default Values n/a Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set mstp region name myRegion_25 revision 34 Command completed successfully Error Codes At least one attribute is required to be set Invalid name Invalid Revision number Page 516 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP show mstp instance instid (id) Description Presents to the user information about a specific MSTP instance. Information shown includes: - List of VLANs mapped to this instance - Root Bridge MAC - Root Bridge priority - OLT Bridge MAC - OLT Priority - Root Path Cost - Regional Root Bridge MAC (only for Instance 0) - Regional Root Bridge Priority (only for Instance 0) - Regional Root Path Cost (only for Instance 0) - Number of Topology changes - Time since last Topology Change For every Port or LAG, which is a member of one of the VLANs mapped to this instance: - - AID Administrative State Operational State Hello Time (Cfg) Hello Time (Current) Port ID: Spanning Tree Port Identifier in form of <Port priority>:<Port ID> Designated Port ID: Spanning Tree identifier of the Designated Port in form of <Port priority>:<Port ID> Designated Bridge ID: Spanning Tree identifier of the Designated Bridge in form of <Port priority>:<Port ID> MSTP Role MSTP State Port priority Path Cost User Privilege Level: Operator Required Parameters: instance instid id Defines the MSTP instance ID to be used for this particular instance. Range: 0 - 63 Total number of instances cannot exceed 64. Instance ID = 0 (the Common Instance) is always present. Default Values n/a Confirmation Message Page 517 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Command completed successfully Example(s) Example 1: (Example showing Instance 2, which has VLANs on two ports (one physical port, one LAG)) AXS2200> show mstp instance instid 2 =============================================================================== MSTP Instance report DATE: 3/27/2010 TIME: 20:15:40 =============================================================================== General VLANs: 3,4 Root Bridge MAC: 00-ff-18-3d-e9-86 Root Bridge Priority: 32768 OLT MAC: 08-c7-3a-2b-22-11 OLT Priority: 32768 Root Path Cost: 200000 Topology Changes: 0 Time since Last Topology Change: 0 day 2 hr 32 min 26 sec Ports: AID: Administrative State: Operational State: Hello Time (Cfg): Hello Time (Current): Port ID: Designated Port ID: Designated Bridge ID: MSTP Role: MSTP State: Port Priority: Path Cost: lag-12 up up 2 2 128:7 128:9 128:98f4cd Root FWD 128 200000 AID: au-12-1 Administrative State: up Operational State: up Hello Time (Cfg): 2 Hello Time (Current): 2 Port ID: 128:7 Designated Port ID: 128:9 Designated Bridge ID: 128:98f4cd MSTP Role: Alternate MSTP State: BLK Port Priority: 200 Path Cost: 2000 =============================================================================== Command completed successfully Example 2: (Example showing Instance 0 AXS2200> show mstp instance instid 0 =============================================================================== MSTP Instance report DATE: 3/27/2010 TIME: 20:15:40 =============================================================================== General VLANs: 4-4094 Root Bridge MAC: 00-ff-18-3d-e9-86 Root Bridge Priority: 32768 OLT MAC: 08-c7-3a-2b-22-11 OLT Priority: 32768 Root Path Cost: 200000 Regional Root Bridge MAC: 08-c7-3a-2b-22-15 Regional Root Bridge Priority: 32768 Page 518 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Regional Root Path Cost: 20000 Topology Changes: 0 Time since Last Topology Change: 0 day 2 hr 32 min 26 sec Ports: AID: Administrative State: Operational State: Hello Time (Cfg): Hello Time (Current): Port ID: Designated Port ID: Designated Bridge ID: MSTP Role: MSTP State: Port Priority: Path Cost: lag-12 up up 2 2 128:7 128:9 128:98f4cd Root FWD 128 200000 AID: au-12-1 Administrative State: up Operational State: up Hello Time (Cfg): 2 Hello Time (Current): 2 Port ID: 128:7 Designated Port ID: 128:9 Designated Bridge ID: 128:98f4cd MSTP Role: Alternate MSTP State: BLK Port Priority: 200 Path Cost: 2000 =============================================================================== Command completed successfully Error Codes Invalid MSTP instance Page 519 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP show mstp port ((all | lag | gigeport)) Description Allows the user to view MSTP configuration and status information for a single port (GigE port or LAG) or all ports in the system. This command will only show ports which have been added to MSTP via the add mstp command as they are the only ones participating in the protocol. The port information will - loop through all ports, which are specified by the user input - for every port loop through all applicable MSTP instances (these are instances 0 - 63 which have VLANs mapped to them for which the specified port is a VLAN member of) Information shown for every port specified in the keyword for which MSTP is enabled: Interface: AID of the interface Administrative State Operational State Hello Time (Cfg): Configured hello time Hello Time (Current): Actual hello time MSTP Instance: VLANs: Port ID: MSTP Instance ID VLANs mapped to this instance Spanning Tree Port Identifier in form of <Port priority>:<Port ID> Designated Port ID: Spanning Tree identifier of the Designated Port in form of <Port priority>:<Port ID> Designated Bridge ID: Spanning Tree identifier of the Designated Bridge in form of <Bridge priority>:<Bridge ID> Path Cost: Spanning Tree Port Path Cost Port State: Forwarding (FWD) Discarding (DSC) Learning (LRN) Blocking (BLK) Port Role: Root (ROOT) Alternate (ALT) Backup (BKP) Designated (DSG) Disabled (DIS) MSTP Instance ID: ....information for next Instance ID (if exists) and so forth User Privilege Level: Operator Required Parameters: (all | lag | gigeport) Keyword all or AID of a Link Aggregation group or GigE Port on the OLT Default Values Confirmation Message Command completed successfully Page 520 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Example(s) Example 1: (Example showing an AETHA GigE port as specified by the input with 3 MSTP instances, which have VLANs on this port.) AXS2200> show mstp port au-5-3 =============================================================================== MSTP Port report DATE: 3/27/2010 TIME: 20:15:40 =============================================================================== Port: Administrative State: Operational State: Hello Time (Cfg): Hello Time (Current): au-5-3 up up 2 2 MSTP Instance: 0 VLANs: 2,5-9,21-4094 Port ID: 128:7 Designated Port ID: 128:9 Designated Bridge ID: 32768:98f4cd MSTP Role: Root MSTP State: FWD Port Priority: 128 Path Cost: 200000 MSTP Instance: 3 VLANs: 3-4 Port ID: 128:7 Designated Port ID: 128:9 Designated Bridge ID: 32768:98f4cd MSTP Role: Root MSTP State: FWD Port Priority: 128 Path Cost: 200000 MSTP Instance: VLANs: Port ID: Designated Port ID: Designated Bridge ID: MSTP Role: MSTP State: Port Priority: Path Cost: 4 10-20 128:17 128:12 32768:007f543321 Altn BLK 112 20000 =============================================================================== Command completed successfully Example 2: (Example showing a switch card port as specified by the input with 3 MSTP instances, which have VLANs on this port.) AXS2200> show mstp port sw-a-2 =============================================================================== MSTP Port report DATE: 3/27/2010 TIME: 20:15:40 =============================================================================== Port: Administrative State: Operational State: Hello Time (Cfg): Hello Time (Current): MSTP Instance: VLANs: Port ID: Designated Port ID: Designated Bridge ID: Page 521 sw-a-2 up up 2 2 0 67-4094 128:7 128:9 32768:98f4cd AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA MSTP MSTP Port Path Provisioning - MSTP Role: State: Priority: Cost: Root FWD 128 200000 MSTP Instance: VLANs: Port ID: Designated Port ID: Designated Bridge ID: MSTP Role: MSTP State: Port Priority: Path Cost: 1 10-20 128:17 128:12 32768:007f543321 Altn BLK 112 20000 MSTP Instance: VLANs: Port ID: Designated Port ID: Designated Bridge ID: MSTP Role: MSTP State: Port Priority: Path Cost: 2 2-9 128:17 128:12 32768:007f543321 Altn BLK 112 20000 =============================================================================== Command completed successfully Error Codes Invalid AID MSTP not enabled on specified port(s) Page 522 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP show mstp protocol detail (summary | verbose) Description Presents to the user the overall protocol settings at the switch level. Information listed includes: General: - Region Name - Configuration revision - Digest - Protocol state (enabled | disabled) Timers: - Max Age (Cfg) - Max Age (Current) - Hello Time (Cfg) - Forward Delay (Cfg) - Forward Delay(Current) - Max hops - Transmit Hold Count - Vendormode (std | cisco) If detail is set to verbose the following list of per-Instance information is provided. For each MSTP instance with mapped VLANs, i.e. non-empty instances: Instance ID: 0 - 64 User Privilege Level: VLAN Set: Set of VLANs under this instance Operator Optional Parameters: detail summary | verbose Allows the user to specify the level of detail to be returned in the command output Default Values detail=summary Confirmation Message Command completed successfully Example(s) Example 1: (detail = summary) AXS2200> show mstp =============================================================================== MSTP REPORT DATE: 01/17/2010 TIME: 16:08:22 =============================================================================== General Region Name: Configuration revision: Digest Protocol state: Page 523 Hillsborough 23 0x3C60DBF24B03EBF09C5922F456D18A03 enabled AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - MSTP Timers Max Age (Cfg): Max Age (Current): Hello Time (Cfg): Forward Delay (Cfg): Forward Delay(Current): Max hops: Transmit Hold Count: Vendormode: 20 20 2 15 15 7 3 cisco =============================================================================== Command completed successfully Example 2: (detail = verbose) AXS2200> show mstp detail verbose =============================================================================== MSTP REPORT DATE: 01/17/2010 TIME: 16:08:22 =============================================================================== General Region Name: Configuration revision: Digest Protocol state: Timers Max Age (Cfg): Max Age (Current): Hello Time (Cfg): Forward Delay (Cfg): Forward Delay(Current): Max hops: Transmit Hold Count: Vendormode: Hillsborough 23 0x3C60DBF24B03EBF09C5922F456D18A03 enabled 20 20 2 15 15 7 3 cisco Instance VLANs -------------------------------------0 3 - 4095 1 1,2 =============================================================================== Command completed successfully Error Codes Page 524 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 525 Provisioning - MSTP AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON Provisioning - PON del ont id ({ontserial | ontaddress}) Description Deletes the specified ONT from the system database. All configurations will be erased and services stopped. Specifically, RF video (if present) will be terminated after a hold-down period. This command requires that all connections on the ONT have been deleted. User Privilege Level: Superuser Required Parameters: {ontserial | ontaddress} id Identifies the ONT by serial number (e.g. MRCC1234DCBA), or by address (e.g. au-3-4-16). For the Serial Number, the first 4 characters are required to be in upper case. Default Values none Confirmation Message This will delete the ONT. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del ont id MOCC1234abcd This will delete the ONT. Do you want to proceed? y | n >y Command completed successfully Example 2: AXS2200> del ont id au-5-1-16 This will delete the ONT. Do you want to proceed? y | n >y Command completed successfully Error Codes Invalid ONT Connections defined - delete first Page 526 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON del pon-protn (primaryponport) Description Deletes the PON protection group, returning each member port to an unprotected PON. The primary port must be active in order for this command to be accepted. If it is not, then perform a forced PON switchover (set ponsw). The secondary port must be detecting LOS in order for this command to be accepted. User Privilege Level: Superuser Required Parameters: primaryponport Specifies the primary port address for the PON protection group. Takes the format of slot-port Example: au-5-1 Default Values none Confirmation Message This will remove protection for the PON. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del pon-protn au-5-1 This will remove protection for the PON. Do you want to continue? y | n > y Command completed successfully Error Codes PON port is secondary - use primary PON port address Primary port must be active to delete PON protection Secondary Port must detect LOS to delete PON protection Invalid PON port Port is not protected Page 527 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON range ont id ({ontserial | ontaddress}) pon (slot-port) Description Ranging activates communications between the OLT and the specified ONT. As it is ranged, the associated PON card stores some basic equipment data in the system database (e.g. serial number, product code, software versions, equipment codes). When this command is issued for a new or unassigned ONT, then the serial number must be used to identify the ONT, and the PON port is required When this command is issued for an ONT with a channel assigned, the ONT AID is used, and the PON port is not needed/allowed. For systems with chassis ont-range set to autodisc or manual, the range operation is performed one time. For systems that have the chassis ont-range set to recovery, the range is attempted up to the recovery interval. This command will automatically enable the ONT, if it was previously in the Emergency-Stop state (including if it previously failed serial number authentication, if the feature is enabled on the OLT). User Privilege Level: Superuser Required Parameters: {ontserial | ontaddress} id Identifies the ONT by serial number (e.g. MRCC1234DCBA), or by address (e.g. au-3-4-16). For the Serial Number, the first 4 characters are required to be in upper case. Optional Parameters: pon slot-port Identifies the PON by the OLT card port address. Default Values pon = assigned pon if the ONT has been ranged previously. Otherwise, it is required to be provided Confirmation Message Ranging request initiated (This is followed by an autonomous message that indicates the success/failure of the ranging process.) Example(s) Example 1: (new ONT that does not have a channel assigned) AXS2200> range ont id MRCC1234ABCD pon au-5-1 Ranging request initiated Example 2: (ONT previously ranged with a channel assigned, and that is in e-stop.) AXS2200> range ont id au-5-1-16 Ranging request initiated Page 528 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON Error Codes PON port is secondary - use primary PON port address ONT SN already exists in the system ONT does not exist Invalid serial number PON port is required for new ONTs Invalid port Invalid OLT PON card equipment state for request ONT is in wrong state for this request Page 529 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set chassis tcont default-percent-gbw-fixed ({10-100}) Description Sets the default value for new T-CONTs for the percentage of the Guaranteed Bandwidth applied to the fixed bandwidth component. Existing T-CONTS are not affected. Individual T-CONTs may have a different value applied using the command "set ont id <ontaddresss> percent-gbw-fixed {10-100}". The setting is used for all GPONs, except for those on an AGPONC card. GPONs on an AGPONC card only suppport the value 100%. User Privilege Level: Superuser Required Parameters: tcont default-percent-gbw-fixed 100} {10- Sets an integer value for the default percentage of Guaranteed Bandwidth that is used for the fixed bandwidth component for new T-CONTs. Default Values 100 % Confirmation Message This will affect traffic descriptors for new T-CONTs. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis tcont default-percent-gbw-fixed 80 This will affect traffic descriptors for new T-CONTs. Do you want to continue? y|n >y Command completed successfully Error Codes Page 530 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set ont id (ontaddress) tcont (tcontid) autobw Description Sets the bandwidth values for a T-CONT to the system calculated defaults for Maximum and Guaranteed Bandwidth. The command is not available for ONTs on a PON from an AGPONC card. User Privilege Level: Superuser Required Parameters: autobw Indicates that the system will automatically calculate the T-CONT Maximum Bandwidth and Guaranteed Bandwidth settings. tcont tcontid Indicates the T-CONT ID in the range {1-n}. ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Default Values none Confirmation Message This will affect the T-CONT bandwidth settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id au-5-1-1 tcont 2 autobw This will affect the T-CONT bandwidth settings. Do you want to continue? y | n >y Command completed successfully Error Codes PON bandwidth unavailable ONT is on a PON that does not support this functionality Invalid ONT Invalid TCONT ID Page 531 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set ont id (ontaddress) tcont (tcontid) manualbw gbw (bw) maxbw (bw) Description Sets the bandwidth values for a T-CONT. Values for the Maximum BW and Guaranteed BW will be rounded to the next multiple of 64 kbps. Both the Maximum Bandwidth and Guaranteed Bandwidth values are required for input. For single T-CONT ONTs only, the maxbw cannot be set to 0; any other value is permitted. Note that when Upstream FEC is enabled on the PON, the available PON bandwidth is reduced by 10% overall. The command is not available for ONTs on a PON from an AGPONC card. User Privilege Level: Superuser Required Parameters: manualbw Indicates that the system will use the operator specified values for the T-CONT Maximum Bandwidth and Guaranteed Bandwidth settings. bw gbw Sets the value for the Guaranteed Bandwidth of a T-CONT, in units of kbps. Valid values for bw are in the set of integers {0-1176576}. maxbw bw Sets the value for the Maximum Bandwidth of a T-CONT, in units of kbps. Valid values for bw are in the set of integers {0-1176576}. tcont tcontid Indicates the T-CONT ID in the range {1-n}. ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Default Values none Confirmation Message This will affect the T-CONT bandwidth settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id au-5-1-1 tcont 2 manualbw gbw 5000 maxbw 10000 Page 532 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON This will affect the T-CONT bandwidth settings. Do you want to continue? y | n >y Command completed successfully Error Codes PON bandwidth unavailable ONT is on a PON that does not support this functionality Invalid ONT Invalid TCONT ID Guaranteed BW cannot exceed Maximum BW Invalid gbw Invalid maxbw Both Maximum Bandwidth and Guaranteed Bandwidth values are required Maximum BW cannot be set to 0 for single T-CONT ONTs Page 533 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set ont id (ontaddress) tcont (tcontid) percent-gbw-fixed ({10-100}) Description Sets the percentage of the Guaranteed Bandwidth to use for the fixed bandwidth component of the T-CONT. The command is not available for ONTs on a PON from an AGPONC card. User Privilege Level: Superuser Required Parameters: tcont tcontid Indicates the T-CONT ID in the range {1-n}. ontaddress id Identifies the ONT by address (e.g. au-3-4-16). percent-gbw-fixed {10-100} Sets an integer value for the percentage of Guaranteed Bandwidth used for the fixed bandwidth component for the T-CONT. Default Values none Confirmation Message This will affect the T-CONT setting for fixed bandwidth. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont id au-5-1-1 tcont 2 percent-gbw-fixed 90 This will affect the T-CONT setting for fixed bandwidth. Do you want to continue? y | n >y Command completed successfully Error Codes ONT does not exist ONT is on a PON that does not support this functionality Invalid ONT Invalid TCONT ID Page 534 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set pon-protn (primaryponport) secondary-pon (secondaryponport) Description Configures the primary and secondary port in a Type B PON protection group. The two PON ports must be on separate PON cards. The secondary port must not have any ONTs connected to it when configuring the redundancy. Both ports must be available for protection, and be enabled and have optics detected. The AGPONC does not support Type B PON protection. User Privilege Level: Superuser Required Parameters: primaryponport Specifies the primary port address for the PON protection group. Takes the format of slot-port Example: au-5-1 secondary-pon secondaryponport Specifies the secondary port address for the PON protection group. Takes the format of slot-port Example: au-6-1 Default Values none Confirmation Message This will configure a PON protection group. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set pon-protn au-5-1 secondary-pon au-12-1 This will configure a PON protection group. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid - chassis setting for ONT-range must not be manual Invalid PON port Card does not support PON protection Secondary port must be on a separate slot than the primary port Primary port is already configured for protection Secondary port must not have any ONTs provisioned or learned Secondary port must be enabled with optics detected Primary port must be enabled with optics detected Secondary port is already configured for protection Page 535 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set ponsw force (slot-port) Description Initiates a forced switchover of the PON to the standby port. User Privilege Level: Superuser Required Parameters: force slot-port Indicates a forced switch for the PON indicated by the port address. The port address identifies the primary port in the protected port pair. The operation will force a switchover of the active PON port to be the one that is currently standby at the time of the command. Default Values none Confirmation Message This will affect service for the duration of the switchover. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ponsw force au-5-1 This will affect service for the duration of the switchover. Do you want to continue? y | n >y Command completed successfully Error Codes PON Protection switching is not supported when ont-range is manual PON port is secondary - use primary PON port address Port is not protected Standby port is on a card that is removed or failed Standby port is detecting LOS Page 536 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set port pon (slot-port) pbit0rate (value) pbit1rate (value) pbit2rate (value) pbit3rate (value) pbit4rate (value) pbit5rate (value) pbit6rate (value) pbit7rate (value) Description Specifies the downstream policing rate associated with each Priority bit at a GPON interface. When 0 is specified, no rate limt should be performed for that P-bit. User Privilege Level: Superuser Required Parameters: pon slot-port Identifies the PON by the OLT card port address. Optional Parameters: pbit0rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. pbit1rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. pbit2rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. pbit3rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. pbit4rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. pbit5rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. pbit6rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. pbit7rate value rate-limit value, either 0, or in the range of (64 kbps - 2,400,000 kbps), in steps of 64 kbps. Default Values Page 537 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON pbit0rate = 0 pbit1rate = 0 pbit2rate = 0 pbit3rate = 0 pbit4rate = 0 pbit5rate = 0 pbit6rate = 0 pbit7rate = 0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set port pon au-12-1 pbit0rate 1200000 pbit1rate 2000 pbit2rate 0 Command completed successfully Error Codes Invalid port. Invalid value Operation not supported for this card type PON port is secondary - use primary PON port address Page 538 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set port pon (slot-port) clear-estop Description Enables all ONTs on the PON that are in the E-stop state (including ONTs that have failed SN authentication). The operation will re-initiate the ONT Serial Number authentication requests for the affected ONTs, if the SN Authentication feature is enabled. Any ONT that was previously set into the E-stop state by operator configuration will return to the E-stop state once it is recognized by the OLT. User Privilege Level: Superuser Required Parameters: clear-estop pon slot-port Identifies the PON by the OLT card port address. Default Values none Confirmation Message Command initiated... Example(s) Example 1: AXS2200> set port pon au-5-1 clear-estop Command initiated AXS2200> Error Codes Invalid PON port PON port is secondary - use primary PON port address Page 539 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set port pon (slot-port) optical hiopticalinpwralarm (value) lowopticalinpwralarm (value) Description Define PON-port based hiopticalinpwralarm and lowopticalinpwralarm that are used as the default values for all the ONT's PON ports attached to this Port. The specific ONT-level configuration, if it was configured, shall override these two values. Setting the Low value to -127.0 dBm will disable reporting of the Low Power alarm and in the same manner, setting the High Power value to 0.0 dBm will disable the High Power alarm reporting. User Privilege Level: Superuser Required Parameters: pon slot-port Identifies the PON by the OLT card port address. optical Specify property (such as hiopticalinpwralarm and lowopticalinpwralarm) of ONT PON port hiopticalinpwralarm value The Received Optical Power Limit (High) above which an alarm will be generated Allowed Range: -127.0 dBm to 0.0 dBm, in 0.5 dB steps lowopticalinpwralarm value The Received Optical Power Threshold (Low) below which an alarm will be generated. Allowed Range: -127.0 dBm to 0.0 dBm, in 0.5 dB steps Default Values lowopticalinpwralarm=-127.0 hiopticalinpwralarm=0.0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set port pon au-5-1 optical hiopticalinpwralarm -9 lowopticalinpwralarm -25 Command completed successfully Error Codes Minimum Power threshold cannot be higher than Maximum Power threshold Invalid port Invalid high power alarm threshold setting Invalid low power alarm threshold setting PON port is secondary - use primary PON port address Page 540 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set port pon (slot-port) state ({enable | disable}) Description Administratively sets the PON port to be enabled or disabled. The port may only be disabled when there are no ONTs provisioned on it. When disabled, the laser is shut off, and alarms are suppressed. User Privilege Level: Superuser Required Parameters: pon slot-port Identifies the PON by the OLT card port address. state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). Default Values enable Confirmation Message This will disable or enable the PON laser. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port pon au-5-4 state disable This will disable or enable the PON laser. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid port Invalid - PON port has ONT(s) configured Port already configured Invalid - PON Protection is configured Page 541 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON set port pon (slot-port) video hivideoinpwralarm (value) lowvideoinpwralarm (value) Description Define PON-port based hivideoinpwralarm and lowvideoinpwralarm that are used as the default values for all the ONT's RF video ports attached to this PON. The specific ONT-port level configuration, if exist, should override these two values. User Privilege Level: Superuser Required Parameters: hivideoinpwralarm value The Received Optical Power Limit (High) above which an alarm will be generated Allowed Range: -1.0 dBm to +3.0 dBm, in 0.1 dBm steps lowvideoinpwralarm value The Received Optical Video Power Threshold (Low) below which an alarm will be generated. Allowed Range: -12.7 dBm to -5.0 dBm, in 0.1 dBm steps pon slot-port Identifies the PON by the OLT card port address. video Specify property (such as hivideoinpwralarm and lowvideoinpwralarm) of RF video port Default Values lowvideoinpwralarm=-8.0 hivideoinpwralarm=2.0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set port pon au-5-1 video hivideoinpwralarm 2.4 lowvideoinpwralarm -6.2 Command completed successfully Error Codes Invalid port Invalid high power alarm threshold setting Invalid low power alarm threshold setting PON port is secondary - use primary PON port address Page 542 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON show pon (slot-port) Description Displays the PON settings and all ONTs associated with the PON. The PON is identified by the OLT port number of the PON card. For PON ports configured for protection, the primary PON port address must be used. The report contains the following information: OLT PON Card Type: Displays the type of PON card. PON Port Admin State: Displays whether the port is set to enable or disable. PON Protection: yes, no PON Protection Group Status: protected (both ports good), unprotected (one port good, one port down), down (both ports down), or n/a Primary Protection Port: the address of the primary pon port and its status (active, standby or unavailable), or n/a if protection is not set. Note that unavailable is used when the card for the port is removed or failed. Secondary Protection Port: the address of the secondary pon port and its status (active, standby or unavailable), or n/a if protection is not set. Note that unavailable is used when the card for the port is removed or failed. ACL-IP: The name of the configured IP layer Access Control List ACL-MAC: The name of the configured MAC layer Access Control List Broadcast/Multicast/Unknown Unicast rate limit (pps): The maximum rate in packets per second, or chassis-bmc-rate. Video property on the PON: hivideoinpwralarm and lowvideoinpwralarm. Optical property on the PON: hiopticalinpwralarm and lowopticalinpwralarm. Pbit0rate: {64 - 2,400,000} kbps or "n/a" Pbit1rate: {64 - 2,400,000} kbps or "n/a" Pbit2rate: {64 - 2,400,000} kbps or "n/a" Pbit3rate: {64 - 2,400,000} kbps or "n/a" Pbit4rate: {64 - 2,400,000} kbps or "n/a" Pbit5rate: {64 - 2,400,000} kbps or "n/a" Pbit6rate: {64 - 2,400,000} kbps or "n/a" Pbit7rate: {64 - 2,400,000} kbps or "n/a" Pbit8rate: {64 - 2,400,000} kbps or "n/a" Total Number of ONTs on the PON: Shows how many ONTs are on the PON. For each ONT found on the PON, the following is reported: - AID (Address): Displays the ONT Address - SN: Displays the serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - Reg ID: Displays the Registration ID for the ONT, or n/a if ONT Registration is not configured. - Name: Displays the user-defined name of the ONT, or "-" if the ONT is unassigned, or if the ONT is pre-provisioned and no name has been specifically configured yet. - OperStatus: Displays the current status of the ONT. The values are: - active (ONT is active) - ranging (ONT is being ranged) - recovery (ONT is recovering provisioning from the OLT) - fault (ONT has suffered an equipment failure) - ooc (out-of-contact: ONT ranging process retries have timed out, or that other failures are preventing the OLT from contacting the ONT). - oocpwr (out-of-contact due to ONT power and battery failure) - e-stop (emergency-stop: ONT has been set to the Emergency Stop state) - dwnld (download: software is being downloaded to the ONT) - battoper (battery-operation: ONT is operating on battery backup) - unasgnd: ONT has no channel ID assigned) - Equipment ID: Displays the equipment ID of the ONT, or "-" if not available. Page 543 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON To view more details for unassigned ONTs, consult the "show pon-unassigned" report. User Privilege Level: Operator Required Parameters: slot-port Selects the desired port. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (ONT Registration NOT configured) AXS2200> show pon au-5-1 =============================================================================== PON REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== OLT PON Card Type: AGPONC PON Port Admin State: enable PON Protection: no PON Protection Group Status: n/a Primary Protection Port: n/a Secondary Protection Port: n/a ACL-IP: qbdef ACL-MAC: qbdef Broadcast/Multicast/Unknown Unicast rate limit (pps): chassis-bmc-rate High Video RX Power Alarm Threshold (dBm): 2.4 Low Video RX Power Alarm Threshold (dBm): -6.2 High Optical RX Power Alarm Threshold (dBm): -12.4 Low Optical RX Power Alarm Threshold (dBm): -25.0 Pbit0rate: n/a Pbit1rate: n/a Pbit2rate: n/a Pbit3rate: n/a Pbit4rate: n/a Pbit5rate: n/a Pbit6rate: n/a Pbit7rate: n/a Total Number of ONTs on PON: 6 Oper Equipment AID SN Reg ID Name Status ID --------- ------------ ---------- -------------------- ------- ---------------au-5-1-1 MRCC33A490BC n/a MRCC33A490BC active BVM6X00CRA au-5-1-2 MRCC1D44911D n/a MRCC1D44911D ranging BVM6X00CRA au-5-1-3 QMBG144567DC n/a olympicpark active BVM6X00CRA au-5-1-4 MRCC12345ABC n/a philipines ooc BVM6X00CRA MRCC12340987 n/a unasgnd BVM6X00CRA MRCCABCD9871 n/a unasgnd BVM6X00CRA ================================================================================ Command completed successfully Example 2: (ONT Registration configured, active pon protection) Page 544 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON AXS2200> show pon au-5-1 =============================================================================== PON REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== OLT PON Card Type: AGPOND PON Port Admin State: enable PON Protection: yes PON Protection Group Status: protected Primary Protection Port: au-5-1 (standby) Secondary Protection Port: au-12-1 (active) ACL-IP: qbdef ACL-MAC; qbdef Broadcast/Multicast/Unknown Unicast rate limit (pps): 500 High Video RX Power Alarm Threshold (dBm): 2.4 Low Video RX Power Alarm Threshold (dBm): -6.2 High Optical RX Power Alarm Threshold (dBm): -12.4 Low Optical RX Power Alarm Threshold (dBm): -25.0 Pbit0rate: 1,200,000 Kbps Pbit1rate: 2000 Kbps Pbit2rate: n/a Pbit3rate: n/a Pbit4rate: n/a Pbit5rate: n/a Pbit6rate: n/a Pbit7rate: n/a Total Number of ONTs on PON: 6 Oper AID SN Reg ID Name Status --------- ------------ ---------- -------------------- ------au-5-1-1 MRCC33A490BC 1111111110 MRCC33A490BC active au-5-1-2 MRCC1D44911D 1111111120 MRCC1D44911D ranging au-5-1-3 QMBG144567DC 1111111145 olympicpark active au-5-1-4 MRCC12345ABC 1111111192 philipines ooc MRCC12340987 1113111112 unasgnd MRCCABCD9871 1111114129 unasgnd Equipment ID ---------------BVM6X00CRA BVM6X00CRA BVM6X00CRA BVM6X00CRA BVM6X00CRA BVM6X00CRA =============================================================================== Command completed successfully Error Codes Invalid port Invalid card PON port is secondary - use primary PON port address Page 545 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON show pon-protn slot ({slot | all}) Description Reports the protection configuration for PON ports. Reported information for the system includes: - PON Protection Switching Type: Non-revertive (not configurable) Reported information For each port includes: - Primary Port Address: The address of the Primary PON Port - Secondary Port Address: The address of the Secondary PON Port - Protection Group Status: protected (both ports good), unprotected (one port good, one port down), down (both ports down), or n/a - Primary Oper Status: The operating state of the port (up or down) - Primary Protection Port Status: active, standby, unavailable, or n/a (if protection is not set). Note that unavailable is used when the card for the port is removed or failed. - Secondary Oper Status: The oeprating state of the port (up or down) - Secondary Protection Port Status: active, standby, unavailable, or n/a (if protection is not set). Note that unavailable is used when the card for the port is removed or failed. Only PON Ports that are configured for protection are reported. Note: PON protection is not supported on the AGPONC card. User Privilege Level: Operator Optional Parameters: {slot | all} slot Specifies one slot, or all slots. Example: au-5 Example: all Default Values If not specified, slot = all Confirmation Message Command completed successfully Example(s) Example 1: (for an individual PON card slot -- lists only pon protection groups that have primary or secondary ports on the card) AXS2200> show pon-protn au-5 =============================================================================== PON PROTECTION REPORT DATE: 08/17/2010 TIME: 16:08:22 =============================================================================== PON Protection Switching Type: Primary Port Address ------au-5-1 au-5-2 au-14-5 Page 546 Secondary Port Address --------au-14-8 au-16-1 au-5-5 Protection Group Status ----------protected unprotected protected Non-revertive Primary Oper Status -------up down up Primary Protn Port Status ----------standby standby active Secondary Oper Status --------up up up Secondary Protn Port Status ----------active active standby AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON =============================================================================== Command completed successfully Example 2: (all PON slots - default to all) AXS2200> show pon-protn =============================================================================== PON PROTECTION REPORT DATE: 08/17/2010 TIME: 16:08:22 =============================================================================== PON Protection Switching Type: Primary Port Address ------au-12-1 au-12-2 au-14-5 Secondary Port Address --------au-14-8 au-16-1 au-4-5 Protection Group Status ----------protected unprotected protected Non-revertive Primary Oper Status -------up down up Primary Protn Port Status ----------standby standby active Secondary Oper Status --------up up up Secondary Protn Port Status ----------active active standby =============================================================================== Command completed successfully Error Codes Invalid card Page 547 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON show pon-unassigned (slot-port) Description Displays the PON settings and all unassigned ONTs associated with the PON. An unassigned ONT is an ONT that has ranged on the PON, but does not have any channel ID assigned to it. The report contains the following information: OLT PON Card Type: Displays the type of PON card. PON Port Admin State: Displays whether the port is set to enable or disable. Video property on the PON: hivideoinpwralarm and lowvideoinpwralarm. Total Number of ONTs on the PON: Shows how many ONTs are on the PON. For each unassigned ONT found on the PON, the following is reported: - SN: Displays the serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - Learned Reg ID: Displays the Learned Registration ID for the ONT, or n/a if ONT Registration is not enabled. - Unassigned Status: The Unassigned status values are: - ranged: ONT is ranging or ranged - ooc (out of contact): ONT is out of contact with the OLT - estop: ONT has been placed into E-stop state due to a reason other than SN authentication failure - fault: ONT has suffered an equipment fault - authfail (authentication failed): ONT has failed ONT SN authentication, and is in E-stop - n/a (a generic unassigned ONT) - ONT Type: Displays the ONT type that was discovered by the OLT via OMCI. - Equipment ID: Displays the equipment ID of the ONT, or "-" if not available. - SW Ver: Displays the software version that is actively running on the ONT. - Auth Status: Indicates whether the ONT FSAN SN has successfully been authenticated. (n/a, fail-dupsn, fail-snnf(snnotfound), pass, pending) User Privilege Level: Operator Required Parameters: slot-port Selects the desired port. Default Values none Confirmation Message Command completed successfully Example(s) Example 1 AXS2200> show pon-unassigned au-5-3 (The OLT setting for SN Authentication is set to disable) =============================================================================== UNASSIGNED PON REPORT DATE: 08/07/2009 TIME: 12:18:46 =============================================================================== Page 548 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON OLT PON Card Type: AGPONC PON Port Admin State: enable High Video RX Power Alarm Threshold (dBm): 2.0 Low Video RX Power Alarm Threshold (dBm): -8.0 Total Number of UNASSIGNED ONTs on PON: 3 SN -----------MRCC000A1620 MRCC000A1625 MRCC00056FBB Learned Reg ID ---------5084551111 5084551112 5084551113 Unassigned Status ---------ranged ranged ranged ONT Type ----------ONT1000GT2 SF24200 ONT6000GET Equipment ID ---------BVM6300CRA BVM6X00CRA BVM6X00CRA SW Ver ---R5.0 R6.0 R5.0 Auth Status ---------n/a n/a n/a =============================================================================== Command completed successfully Example 2 (Some ONTs have failed authentication) AXS2200> show pon-unassigned au-5-3 =============================================================================== UNASSIGNED PON REPORT DATE: 08/07/2009 TIME: 12:18:46 =============================================================================== OLT PON Card Type: AGPOND PON Port Admin State: enable High Video RX Power Alarm Threshold (dBm): 2.0 Low Video RX Power Alarm Threshold (dBm): -8.0 Total Number of UNASSIGNED ONTs on PON: 3 SN -----------MRCC000A1620 MRCC000A1625 MRCC00056FBB MRCC00BB89A0 Learned Reg ID ---------5084551111 5084551112 5084551113 5084551122 Unassigned Status ---------ranged authfail authfail ranged ONT Type ----------ONT1000GT2 SF24200 ONT6000GET ONT1000GT2 Equipment ID ---------BVM6300CRA BVM6X00CRA BVM6X00CRA BVM6300CRA SW Ver ---R5.0 R6.0 R5.0 R5.0 Auth Status ---------pending fail-dupsn fail-snnf pass =============================================================================== Command completed successfully Error Codes Invalid port Invalid card PON port is secondary - use primary PON port address Page 549 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON show tcont ont (ontaddress) Description This command allows the user to view all T-CONTS for an ONT. Reported values are provided in the list below. The number is rounded to the nearest integer. - The ONT physical address For each TCONT: - OLT PON Allocation ID - ONT TCONT ID - Traffic Type (OMCI, Data, OMCIandData). - Max BW: The maximum bandwidth setting in kbps. It is calculated by the system to be the sum of PIR for all VLAN members/ connections for the TCONT, including PON overhead - Guar BW: The guaranteed bandwidth setting in kbps. It is calculated by the system to be the sum of CIR for all VLAN members/connections for the TCONT, including PON overhead - GBW % Fixed: The percentage of guaranteed bandwidth that is used for the fixed bandwidth component - Fixed BW: The fixed bandwidth component in kbps. - Assured BW: The assured bandwidth component in kbps. And summary values are provided for each bandwidth column. Note that the subtotals exclude bandwidth for the default T-CONTs (i.e. ONT TCONT ID=def). This release uses type 5 T-CONTs per G984.3. In the report, each VLAN member/connection to the ONT is shown in a table along with the assigned T-CONT, SVID, optional CVID and traffic descriptors for CIR and PIR. Note that the per-VLAN member/connection traffic descriptors are provided in Mbps to align with the units used for provisioning the VLAN member/connection traffic descriptor. The table below shows the minimum bandwidth, and the bandwidth increment that can be assigned to a T-CONT for each GPON card type. (kb/s) (kb/s) GPON Card T-CONT Min BW T-CONT BW Increment --------------------------------- ------------- ------------------AGPOND/AGPON8A (default alloc_ID) 64.0 64.0 AGPOND/AGPON8A (additional) 0.0 64.0 AGPONC 819.2 409.6 For the AGPOND/AGPON8A PON, if a service is provisioned with a traffic descriptor that has CIR=0 kbps and PIR> 0 kbps, then the guaranteed BW will be set to 64 kbps. Note that 802.1x authentication traffic is carried on the default T-CONT, along with OMCI. User Privilege Level: Operator Required Parameters: ont ontaddress Page 550 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON Specifies the address of the ONT in the format: - oltslot-port-channel (e.g. au-5-1-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (AGPOND: Multiple TCONT ONT) AXS2200> show tcont ont au-5-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 01/04/2008 TIME: 14:49:25 =============================================================================== ONT Address: au-5-1-1 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----1 298 299 300 301 ONT TCONT ID ----def 1 2 3 4 Max BW -------64 5504 2240 0 0 Guar BW -------64 1152 576 0 0 7744 1728 Traf ----------OMCI Data Data Data Data ONT TOTAL GBW % Fixed ----100 60 80 80 80 Fixed BW -------64 691 461 0 0 Assured BW -------0 461 115 0 0 1152 576 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail ONT TCONT ID ----1 2 Endpoint AID -----------enet-1 voip SVID ---20 20 CVID ---16 2013 Upstream TD Name -------------------bronze_us pkt_voip2 (Mbps) CIR ------1.0 0.5 (Mbps) PIR ------5.0 2.0 =============================================================================== Command completed successfully Example 2: (AGPOND: Multiple TCONT ONT for H.248) AXS2200> show tcont ont au-5-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 01/04/2008 TIME: 14:49:25 =============================================================================== ONT Address: au-5-1-1 Page 551 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----1 298 299 300 301 ONT TCONT ID ----def 1 2 3 4 Max BW -------64 5504 2240 0 0 Guar BW -------64 1152 384 0 0 7744 1536 Traf ----------OMCI Data Data Data Data ONT TOTAL GBW % Fixed ----100 60 80 80 80 Fixed BW -------64 691 307 0 0 Assured BW -------0 461 77 0 0 998 538 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail ONT TCONT ID ----1 2 Endpoint AID -----------enet-1 pots SVID ---20 4093 CVID ---16 - Upstream TD Name -------------------bronze_us pkt_pots2 (Mbps) CIR ------1.0 0.3 (Mbps) PIR ------5.0 2.0 =============================================================================== Command completed successfully Example 3: (AGPOND: Multiple TCONT ONT for an ONT with Video RPD) AXS2200> show tcont ont au-5-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 01/04/2008 TIME: 14:49:25 =============================================================================== ONT Address: au-5-1-1 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----1 298 299 300 301 ONT TCONT ID ----def 1 2 3 4 Max BW -------64 5632 2240 0 0 Guar BW -------64 1280 576 0 0 7872 1856 Traf ----------OMCI Data Data Data Data ONT TOTAL GBW % Fixed ----100 60 80 80 80 Fixed BW -------64 768 461 0 0 Assured BW -------0 512 115 0 0 1229 628 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail ONT TCONT ID ----1 1 2 Endpoint AID -----------enet-1 video-1 voip SVID ---20 4092 20 CVID ---16 2013 Upstream TD Name -------------------bronze_us pkt_video_sfu pkt_voip2 (Mbps) CIR ------1.0 0.1 0.5 (Mbps) PIR ------5.0 0.1 2.0 =============================================================================== Command completed successfully Page 552 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON Example 4: (AGPOND: Single TCONT ONT with services configured) AXS2200> show tcont ont au-5-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 01/04/2008 TIME: 14:49:25 =============================================================================== ONT Address: au-5-1-1 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----1 ONT TCONT ID Traf ----- ----------1 OMCIandData Guar BW -------2048 8192 2048 ONT TOTAL Max BW -------8192 GBW % Fixed ----100 Fixed BW -------2048 Assured BW -------0 2048 0 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail ONT TCONT ID ----1 1 Endpoint AID -----------enet-1 voip SVID ---20 20 CVID ---16 2013 Upstream TD Name -------------------bronze_us pkt_voip2 (Mbps) CIR ------1.0 0.5 (Mbps) PIR ------5.0 2.0 =============================================================================== Command completed successfully Example 5: (AGPOND: Multiple Tcont ONT with no services configured) AXS2200> show tcont ont au-16-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 04/07/2009 TIME: 15:53:37 =============================================================================== ONT Address: au-16-1-1 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----0 256 257 258 259 ONT TCONT ID ----def 1 2 3 4 Traf ----------OMCI Data Data Data Data ONT TOTAL Max BW ------64 0 0 0 0 Guar BW ------64 0 0 0 0 0 0 GBW % Fixed ----100 100 100 100 100 Fixed BW ------64 0 0 0 0 Assured BW ------0 0 0 0 0 0 0 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail vlan-member/connection: none Page 553 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON =============================================================================== Command completed successfully Example 6: (AGPOND: Single Tcont ONT with no services configured) AXS2200> show tcont ont au-16-1-2 =============================================================================== SHOW T-CONT ONT REPORT DATE: 04/07/2009 TIME: 15:55:11 =============================================================================== ONT Address: au-16-1-2 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----1 ONT TCONT ID ----1 Traf ----------OMCIandData ONT TOTAL Max BW ------64 Guar BW ------64 0 0 GBW % Fixed ----100 Fixed BW ------64 Assured BW ------0 0 0 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail vlan-member/connection: none =============================================================================== Command completed successfully Example 7: (AGPOND Multiple TCONT ONT with connections configured) AXS2200> show tcont ont au-16-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 04/07/2009 TIME: 15:57:25 =============================================================================== ONT Address: au-16-1-1 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----0 256 257 258 259 ONT TCONT ID ----def 1 2 3 4 Traf ----------OMCI Data Data Data Data ONT TOTAL Max BW ------64 11008 0 0 0 Guar BW ------64 11008 0 0 0 11008 11008 GBW % Fixed ----100 100 100 100 100 Fixed BW ------64 11008 0 0 0 Assured BW ------0 0 0 0 0 11008 0 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail ONT TCONT ID Page 554 Endpoint AID SVID CVID Upstream TD Name (Mbps) CIR AXS2200 OLT (Mbps) PIR R7.4 CLI Reference Guide MOTOROLA ----1 Provisioning - PON -----------enet-1 ---500 ---- -------------------pkt_iptvoltup ------10.0 ------10.0 =============================================================================== Command completed successfully Example 8: (AGPOND: Single Tcont ONT with services configured) AXS2200> show tcont ont au-16-1-2 =============================================================================== SHOW T-CONT ONT REPORT DATE: 04/07/2009 TIME: 15:59:58 =============================================================================== ONT Address: au-16-1-2 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----1 ONT TCONT ID ----1 Traf ----------OMCIandData ONT TOTAL Max BW ------11008 Guar BW ------11008 11008 11008 GBW % Fixed ----100 Fixed BW ------11008 Assured BW ------0 11008 0 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail ONT TCONT ID ----1 Endpoint AID -----------enet-1 SVID ---500 CVID ---- Upstream TD Name -------------------pkt_iptvoltup (Mbps) CIR ------10.0 (Mbps) PIR ------10.0 =============================================================================== Command completed successfully Example 9: (AGPONC with no services configured) AXS2200> show tcont ont au-12-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 04/07/2009 TIME: 16:01:22 =============================================================================== ONT Address: au-12-1-1 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----0 ONT TCONT ID ----1 Traf ----------OMCIandData ONT TOTAL Max BW ------819 Guar BW ------819 819 819 GBW % Fixed ----100 Fixed BW ------819 Assured BW ------0 819 0 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail vlan-member/connection: none Page 555 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON =============================================================================== Command completed successfully Example 10: (AGPONC: ONT has services configured) XS2200> show tcont ont au-12-1-1 =============================================================================== SHOW T-CONT ONT REPORT DATE: 04/07/2009 TIME: 16:02:49 =============================================================================== ONT Address: au-12-1-1 All BW values are given in kbps, and rounded to the nearest integer except where otherwise noted. PON ALLOC ID ----0 ONT TCONT ID ----1 Traf ----------OMCIandData ONT TOTAL Max BW ------11059 Guar BW ------11059 11059 11059 GBW % Fixed ----100 Fixed BW ------11059 Assured BW ------0 11059 0 Note: ONT Total excludes default tconts (i.e. ONT TCONT ID=def). -----------------------------------------------------------------------------Upstream Connections Detail ONT TCONT ID ----1 Endpoint AID -----------enet-1 SVID ---500 CVID ---- Upstream TD Name -------------------pkt_iptvoltup (Mbps) CIR ------10.0 (Mbps) PIR ------10.0 =============================================================================== Command completed successfully Error Codes Invalid ONT Page 556 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON show tcont pon (slot-port) Description This command allows the user to view the TCONT bandwidth settings for all TCONTs on a PON. - PON port: The PON port address on the OLT PON card - PON BW Total: The total amount of upstream BW on the PON in kbps The following information is shown in table form for each TCONT on the PON: - ONT Address - OLT PON Allocation ID - ONT TCONT ID - Traffic Type (OMCI, Data, OMCIandData) - Max BW: The maximum bandwidth setting in kbps. It is calculated by the system to be the sum of PIR for all VLAN members/connections for the TCONT, including PON tax - Guar BW: The guaranteed bandwidth setting in kbps. It is calculated by the system to be the sum of CIR for all VLAN members/connections for the TCONT, including PON overhead - GBW %Fixed: The percentage of guaranteed bandwidth that is used for the fixed bandwidth component - Fixed BW: The fixed bandwidth component in kbps. - Assured BW: The assured bandwidth component in kbps. And summary values are provided for each bandwidth column. Note that the subtotals exclude bandwidth for the default T-CONTs (i.e. ONT TCONT ID=def). - PON Subtotals: Total configured bandwidth for the column - Available: Total remaining bandwidth available for the column (Total PON BW - configured BW). Only provided for Guaranteed BW and Maximum BW columns - Subscription: the ratio of the configured bw for the column to the Total PON bandwidth (PON Subtotal/PON BW Total) This release uses type 5 T-CONTs per G984.3. The table below shows the minimum bandwidth, and the bandwidth increment that can be assigned to a T-CONT for each GPON card type. Upstream GPON Rate is 1,244 Mb/s. After accomodating for reserved PON BW and DBA, the maximum bandwidth available for configured services is: - AGPOND/AGPON8A PONs (no Upstream FEC): 1,176,576 kbps (including pon tax) - AGPOND/AGPON8A PONs (with Upstream FEC): 1,058,918 kbps (a 10% reduction available bandwidth due to codewords) - AGPONC PONs: 1,112,883 kbps (including pon tax) (kb/s) (kb/s) GPON Card T-CONT Min BW T-CONT BW Increment --------------------------------- ------------- ------------------AGPOND/AGPON8A (default alloc_ID) 64.0 64.0 AGPOND/AGPON8A (additional) 0.0 64.0 AGPONC 819.2 409.6 For the AGPOND/AGPON8A PON, if a service is provisioned with a traffic descriptor that has CIR=0 kbps and PIR> 0 kbps, then the guaranteed BW will be set to 64 kbps. Note that 802.1x authentication traffic is carried on the default T-CONT, along with OMCI. User Privilege Level: Page 557 Operator AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON Required Parameters: pon slot-port Identifies the PON by the OLT card port address. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (AGPOND: ONTs have services configured with varying gbw-percent-fixed values) AXS2200> show tcont pon au-16-1 =============================================================================== SHOW T-CONT PON REPORT DATE: 04/03/2009 TIME: 18:59:24 =============================================================================== PON Port: au-16-1 PON BW Total: 1176576 All BW values are given in kbps, and rounded to the nearest integer PON ALLOC ONT Address ID ----------- ----AU-5-1-1 1 AU-5-1-1 298 AU-5-1-1 299 AU-5-1-1 300 AU-5-1-1 301 AU-5-1-20 56 AU-5-1-20 573 AU-5-1-20 574 AU-5-1-20 577 AU-5-1-20 578 AU-5-1-22 114 AU-5-1-22 853 AU-5-1-22 854 AU-5-1-22 855 AU-5-1-22 856 AU-5-1-23 14 AU-5-1-24 15 PON SUBTOTALS AVAILABLE %SUBSCRIPTION ONT TCONT ID ----def 1 2 3 4 def 1 2 3 4 def 1 2 3 4 1 1 Traf ----------OMCI Data Data Data Data OMCI Data Data Data Data OMCI Data Data Data Data OMCIandData OMCIandData Max BW ------64 50048 15040 8000 768 64 768 15040 0 0 64 768 0 0 0 64 2112 Guar GBW% Fixed Assured BW Fixed BW BW ------- ----- ------- ------64 100% 64 0 10048 60% 6029 4019 9024 80% 7219 1805 4032 50% 2016 2016 768 80% 614 154 64 100% 64 0 768 80% 614 154 9024 80% 7219 1805 0 80% 0 0 0 80% 0 0 64 100% 64 0 768 80% 614 153.6 0 80% 0 0 0 80% 0 0 0 80% 0 0 64 100% 64 0 1088 90% 979.2 108.8 92544 35520 1084032 1141056 7.87% 3.02% 25305.6 10214.4 2.15% 0.87% Note: PON Subtotals and Available exclude default tconts (i.e. ONT TCONT ID=def). =============================================================================== Command completed successfully Example 2: (AGPOND- A PON that has two ONTs with no services configured on either one. One ONT supports multiple T-CONTs and the other supports one T-CONT) AXS2200> show tcont pon au-16-1 =============================================================================== SHOW T-CONT PON REPORT DATE: 04/03/2009 TIME: 18:59:24 =============================================================================== Page 558 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON PON Port: au-16-1 PON BW Total: 1176576 All BW values are given in kbps, and rounded to the nearest integer PON ALLOC ONT Address ID ----------- ----au-16-1-1 0 au-16-1-1 256 au-16-1-1 257 au-16-1-1 258 au-16-1-1 259 au-16-1-2 1 ONT TCONT ID ----def 1 2 3 4 1 Traf ----------OMCI Data Data Data Data OMCIandData PON SUBTOTALS AVAILABLE %SUBSCRIPTION Max BW ------64 0 0 0 0 64 Guar BW ------64 0 0 0 0 64 0 0 1176576 1176576 0.00% 0.00% GBW% Fixed Assured Fixed BW BW ----- ------- ------100 64 0 100 0 0 100 0 0 100 0 0 100 0 0 100 64 0 0 0 0.00% 0.00% Note: PON Subtotals and Available exclude default tconts (i.e. ONT TCONT ID=def). =============================================================================== Command completed successfully Example 3: (AGPONC- A PON that has ONTs with no services configured on them.) AXS2200> show tcont pon au-12-1 =============================================================================== SHOW T-CONT PON REPORT DATE: 04/03/2009 TIME: 18:59:40 =============================================================================== PON Port: au-12-1 PON BW Total: 1112883 All BW values are given in kbps, and rounded to the nearest integer PON ALLOC ONT Address ID ----------- ----au-12-1-1 0 au-12-1-2 1 au-12-1-3 2 au-12-1-4 3 ONT TCONT ID ----1 1 1 1 PON SUBTOTALS AVAILABLE %SUBSCRIPTION Traf ----------OMCIandData OMCIandData OMCIandData OMCIandData Max BW ------819 819 819 819 Guar BW ------819 819 819 819 3276 3276 1109607 1109607 0.30% 0.30% GBW% Fixed Assured Fixed BW BW ----- ------- ------100 819 0 100 819 0 100 819 0 100 819 0 3276 0 0.30% 0.00% Note: PON Subtotals and Available exclude default tconts (i.e. ONT TCONT ID=def). =============================================================================== Command completed successfully Example 4: (AGPOND: Two ONTs ranged, service configured on the single T-CONT ONT only) AXS2200> show tcont pon au-16-1 =============================================================================== SHOW T-CONT PON REPORT DATE: 04/03/2009 TIME: 19:01:52 =============================================================================== PON Port: au-16-1 PON BW Total: 1176576 Page 559 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON All BW values are given in kbps, and rounded to the nearest integer PON ALLOC ONT Address ID ----------- ----au-16-1-1 0 au-16-1-1 256 au-16-1-1 257 au-16-1-1 258 au-16-1-1 259 au-16-1-2 1 ONT TCONT ID ----def 1 2 3 4 1 Traf ----------OMCI Data Data Data Data OMCIandData PON SUBTOTALS AVAILABLE %SUBSCRIPTION Max BW ------64 0 0 0 0 128 Guar BW ------64 0 0 0 0 64 128 64 1176448 1176512 0.02% 0.01% GBW% Fixed Assured Fixed BW BW ----- ------- ------100 64 0 100 0 0 100 0 0 100 0 0 100 0 0 100 64 0 64 0 0.01% 0.00% Note: PON Subtotals and Available exclude default tconts (i.e. ONT TCONT ID=def). =============================================================================== Command completed successfully Example 5: (AGPOND: Two ONTs ranged on the PON- one that supports multiple T-CONTs and one that does not. The single T-CONT ONT has no services configured. The multiple T-CONT one has services configured). AXS2200> show tcont pon au-16-1 =============================================================================== SHOW T-CONT PON REPORT DATE: 04/03/2009 TIME: 19:04:04 =============================================================================== PON Port: au-16-1 PON BW Total: 1176576 All BW values are given in kbps, and rounded to the nearest integer PON ALLOC ONT Address ID ----------- ----au-16-1-1 0 au-16-1-1 256 au-16-1-1 257 au-16-1-1 258 au-16-1-1 259 au-16-1-2 1 ONT TCONT ID ----def 1 2 3 4 1 PON SUBTOTALS AVAILABLE %SUBSCRIPTION Traf ----------OMCI Data Data Data Data OMCIandData Max BW ------64 11008 0 0 0 64 Guar BW ------64 11008 0 0 0 64 11008 11008 1165568 1165568 0.94% 0.94% GBW% Fixed Assured Fixed BW BW ----- ------- ------100 64 0 100 11008 0 100 0 0 100 0 0 100 0 0 100 64 0 11008 0 0.94% 0.00% Note: PON Subtotals and Available exclude default tconts (i.e. ONT TCONT ID=def). =============================================================================== Command completed successfully Example 6: (AGPOND: Two ONTs on the PON, both configured with services) AXS2200> show tcont pon au-16-1 =============================================================================== SHOW T-CONT PON REPORT DATE: 04/03/2009 TIME: 19:14:52 =============================================================================== PON Port: au-16-1 PON BW Total: 1176576 Page 560 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON All BW values are given in kbps, and rounded to the nearest integer PON ALLOC ONT Address ID ----------- ----au-16-1-1 0 au-16-1-1 256 au-16-1-1 257 au-16-1-1 258 au-16-1-1 259 au-16-1-2 1 PON SUBTOTALS AVAILABLE %SUBSCRIPTION ONT TCONT ID ----def 1 2 3 4 1 Traf ----------OMCI Data Data Data Data OMCIandData Max BW ------64 11008 0 0 0 11008 Guar BW ------64 11008 0 0 0 11008 22016 22016 1154560 1154560 1.88% 1.88% GBW% Fixed Assured Fixed BW BW ----- ------- ------100 64 0 100 11008 0 100 0 0 100 0 0 100 0 0 100 11008 0 22016 0 1.88% 0.00% Note: PON Subtotals and Available exclude default tconts (i.e. ONT TCONT ID=def). =============================================================================== Command completed successfully Example 7: (error for the case where a non-PON card is in the requested slot, or if the slot is empty) AXS2200> show tcont pon au-4-1 Invalid port Error Codes Invalid port PON is empty PON port is secondary - use primary PON port address Page 561 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON show tcont-detail ont (ontaddress) tcont (tcontid) Description This command allows the user to view a detailed report for a single T-CONT on an ONT. This release uses type 5 T-CONTs per G984.3. Reported values are provided in the list below. Where applicable, the number is rounded to the nearest integer. - The ONT physical address - OLT PON Allocation ID - ONT TCONT ID - Traffic Type (OMCI, Data, OMCIandData). - Bandwidth Mode: auto, manual. If auto, the values for the Maximum Bandwidth and Guaranteed Bandwidth are calculated by the system. If manual, indicates that the operator has directly configured the values for the Maximum Bandwidth and Guaranteed Bandwidth. - Maximum BW: The maximum bandwidth setting in kbps. - Guaranteed BW: The guaranteed bandwidth setting in kbps. - GBW % Fixed: The percentage of guaranteed bandwidth that is used for the fixed bandwidth component - Fixed BW: The fixed bandwidth component in kbps. - Assured BW: The assured bandwidth component in kbps. Additionally, each VLAN member/connection on the T-CONT is shown in a table along with the AID, SVID, optional CVID and provisioned CIR and PIR values from the traffic descriptors. At the bottom of the table, the total of the CIRs and PIRs is provided. Note that the per-VLAN member/connection traffic descriptors are provided in Mbps to align with the units used for provisioning the VLAN member/connection traffic descriptor. The table below shows the minimum bandwidth, and the bandwidth increment that can be assigned to a T-CONT for each GPON card type. (kb/s) (kb/s) GPON Card T-CONT Min BW T-CONT BW Increment ------------------------- ------------- ------------------AGPOND (default alloc_ID) 64.0 64.0 AGPOND (additional) 0.0 64.0 AGPONC 819.2 409.6 For the AGPOND PON, if a service is provisioned with a traffic descriptor that has CIR=0 kbps and PIR> 0 kbps, then the guaranteed BW increment will be 64 kbps for the system default. Note that 802.1x authentication traffic is carried on the default T-CONT, along with OMCI. User Privilege Level: Operator Required Parameters: ont ontaddress Specifies the address of the ONT in the format: - oltslot-port-channel (e.g. au-5-1-16) Valid choices for the address parameters are: Page 562 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) tcont tcontid Indicates the T-CONT ID in the range {1-n}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (AGPOND: Multiple TCONT ONT - default TCONT BW settings) AXS2200> show tcont-detail ont au-5-1-1 tcont 1 =============================================================================== SHOW T-CONT INDIVIDUAL REPORT DATE: 09/04/2009 TIME: 14:49:25 =============================================================================== ONT Address: au-5-1-1 PON ALLOC ID: 298 ONT TCONT ID: 1 Traffic Type: Data Bandwidth Mode: auto Maximum BW (kb/s): 5504 Guaranteed BW (kb/s): 1152 Guaranteed BW % Fixed: 60 Fixed BW (kb/s): 691 Assured BW (kb/s): 461 Upstream Connections Detail Endpoint AID -----------enet-1 voip SVID ---20 20 CVID ---16 2013 Total Upstream TD Name -------------------bronze_us pkt_voip2 (Mbps) (Mbps) CIR PIR ------- ------0.5 3.0 0.5 2.0 1.0 5.0 =============================================================================== Command completed successfully Example 2: (AGPOND: Multiple TCONT ONT - overridden TCONT BW settings) AXS2200> show tcont-detail ont au-5-1-1 tcont 1 =============================================================================== SHOW T-CONT INDIVIDUAL REPORT DATE: 09/04/2009 TIME: 14:49:25 =============================================================================== ONT Address: au-5-1-1 PON ALLOC ID: 298 ONT TCONT ID: 1 Traffic Type: Data Bandwidth Mode: manual Maximum BW (kb/s): 5056 Guaranteed BW (kb/s): 1024 Guaranteed BW % Fixed: 60 Fixed BW (kb/s): 640 Assured BW (kb/s): 384 Page 563 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - PON Upstream Connections Detail Endpoint AID -----------enet-1 voip SVID ---20 20 CVID ---16 2013 (Mbps) (Mbps) CIR PIR ------- ------0.5 3.0 0.5 2.0 Upstream TD Name -------------------bronze_us pkt_voip2 Total 1.0 5.0 =============================================================================== Command completed successfully Example 3: (AGPOND or AGPONC: Single TCONT ONT) AXS2200> show tcont-detail ont au-5-1-1 tcont 1 =============================================================================== SHOW T-CONT INDIVIDUAL REPORT DATE: 09/04/2009 TIME: 14:49:25 =============================================================================== ONT Address: au-5-1-1 PON ALLOC ID: 298 ONT TCONT ID: 1 Traffic Type: OMCIandData Bandwidth Mode: auto Maximum BW (kb/s): 8192 Guaranteed BW (kb/s): 2048 Guaranteed BW % Fixed: 100 Fixed BW (kb/s): 2048 Assured BW (kb/s): 0 Upstream Connections Detail Endpoint AID -----------enet-1 voip Total SVID ---20 20 CVID ---16 2013 Upstream TD Name -------------------bronze_us pkt_voip2 (Mbps) (Mbps) CIR PIR ------- ------1.0 5.0 0.5 2.0 1.5 7.0 =============================================================================== Command completed successfully Error Codes Invalid ONT ONT does not exist Invalid TCONT Invalid TCONT ID Page 564 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 565 Provisioning - PON AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Loopbacks Provisioning - Port Loopbacks clear loopback port (slot-port) Description Takes down a loopback test for the specified port. Applies to the following loopback types: - DS1 physical ports on the Voice Gateway card - GigE/10 GigE port loopbacks on the Switch card or Ethernet Line Card User Privilege Level: Operator Required Parameters: slot-port Selects the desired port. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: (Voice Gateway card for a DS1 physical port): AXS2200> clear loopback port au-1-2 Command completed successfully Example 2: (Switch card for a GigE port loopback): AXS2200> clear loopback port sw-a-2 Command completed successfully Example 3: (Ethernet Line Card for a GigE port loopback): AXS2200> clear loopback port au-11-2 Command completed successfully Error Codes Invalid port invalid - Loopback not active on this port Invalid slot Page 566 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Loopbacks set loopback port ds1 (ds1aid) type ({line | payload}) Description Allows the user to loopback a DS1 interface to the far end. Local loopbacks may be set up for any DS1 interface on the Voice Gateway card that is assigned to an interface group or to the T1CAS protocol (ESF and SF framing), or is assigned to a DS1 clear channel connection. For interfaces supporting ESF framing, the far end may additionally activate local loopbacks. The ability to initiate far end loopbacks for DS1 interfaces that use ESF framing (i.e. T1CAS or GR-303 DS1 Interfaces) or no framing (i.e. DS1 Clear Channel) is not supported. Loopbacks that are in effect are notified to the user by standing conditions. Status of the DS1 loopbacks is available in the "show loopback port" command. Loopbacks that are established locally and by the far end (for ESF only) may be cleared using the "clear loopback port" command. To change between a payload and line loopback (or vice versa), first clear the loopback, then establish the new one. User Privilege Level: Operator Required Parameters: type {line | payload} Indicates the type of loopback for the virtual DS1 interface on the Voice Gateway card. - line: loops back the entire DS1 signal without going through the framer - payload: loops back the DS1 payload. Frame bits are not looped back. ds1 ds1aid Identifies the DS1 physical interface port on the Voice Gateway card. For example: au-1-1 Default Values location = near end loopback Confirmation Message This command will affect services on the DS1 interface. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (local/near end payload loopback, DS1 interface on the voice gateway card) AXS2200> set loopback port ds1 au-1-1 type payload This command will affect services on the DS1 interface. Do you want to continue? y | n >y Command completed successfully Example 2: Page 567 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Loopbacks (local/near end line loopback to the far end, DS1 interface on the voice gateway card) AXS2200> set loopback port ds1 au-1-12 type line This command will affect services on the DS1 interface. Do you want to continue? y | n >y Command completed successfully Error Codes DS1 interface already in requested state Voice gateway not equipped Loopback already active on this port Invalid ds1 Interface DS1 must be assigned to GR-303, TR-08, T1CAS or a Clear Channel connection Port does not support this type of loopback Page 568 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Loopbacks show loopback port ({slot | slot-port | all}) Description Displays the configuration and operating state for all loopbacks that are in effect for the specified port(s). Port loopbacks are not retained across a reset or card removal. When a user requests a report, only the ports with active loopbacks are displayed. Ports may be selected independently for loopbacks, regardless of whether they are configured for protection or not; only the specified port will be looped back, which may result in link aggregation redistribution of traffic (for GigE/10 GigE WAN ports only). Note that in some cases the far end of the link may establish the loopback. In that case the loopback configuration will show "none" but the operating loopback would be in effect. To view port loopbacks on ONT ports, use the CLI command "show ont portsummary". User Privilege Level: Operator Required Parameters: {slot | slot-port | all} Selects the port (slot-port), all ports associated with a slot (slot), or all ports associated with the system (all). Default Values None Confirmation Message Command completed successfully Example(s) Example 1: (no active loopbacks): AXS2200> show loopback port au-1-3 no loopbacks configured for port(s) Example 2: (all ports): AXS2200> show loopback port all =============================================================================== PORT LOOPBACKS REPORT DATE: 7/22/2007 TIME: 08:34:22 =============================================================================== Configured Operating Port Port Type Loopback Type Loopback Type ---------------------------------------au-1-1 ds1 line line sw-a-2 gige none ne sw-b-3 gige fe fe au-11-1 gige fe fe =============================================================================== Command completed successfully Page 569 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Loopbacks Error Codes Invalid port Invalid slot No alarms active No loopbacks configured for port(s) Page 570 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 571 Provisioning - Port Loopbacks AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles Provisioning - Port Profiles del profile enetport name (name) Description This command deletes the entry in the Ethernet Port Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile enetport name standardinternet Command completed successfully Error Codes qbdef profiles cannot be deleted Default profiles cannot be deleted Profile name not found in Profile Table Profile in use Page 572 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles del profile hcnaport name (name) Description This command deletes the entry in the HCNA port Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message Example(s) Example 1: AXS2200> del profile hcnaport name beta Command completed successfully Error Codes Default profiles cannot be deleted Profile name not found in Profile Table qbdef profiles cannot be deleted Profile in use Page 573 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles del profile mocaport name (name) Description This command deletes the entry in the Mocaport Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile mocaport name alpha Command completed successfully Error Codes qbdef profiles cannot be deleted Default profiles cannot be deleted Profile name not found in Profile Table Profile in use Page 574 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles del profile potsport name (name) Description This command deletes the entry in the POTS Port Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile potsport name twolinesbasic Command completed successfully Error Codes Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Default profiles cannot be deleted Page 575 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles del profile vdslport name (name) Description This command deletes the entry in the VDSL Port Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile vdslport name delay5 Command completed successfully Error Codes Default profiles cannot be deleted Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Page 576 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles del profile videoport name (name) Description This command deletes the entry in the Video Port Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del profile videoport name novidalarms Command completed successfully Error Codes Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Default profiles cannot be deleted Page 577 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set ont port enet (ontenetaddress) lldp-med-profile (name) Description This command is used to assign an LLDP-MED profile to an ONT Ethernet port. Certain ONT types may not support this protocol and will ignore the settings even though the assignment will succeed. User Privilege Level: Superuser Required Parameters: lldp-med-profile name Name of the LLDP-MED profile, which should be applied to this Ethernet Port. enet ontenetaddress Specifies the ONT Ethernet port address. It takes the following format:, - oltslot-port-channel-enet-index (e.g. au-3-4-16-enet-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-12-enet-1 lldp-med-profile POL21 This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes ONT Invalid port ONT is in wrong state for this request Profile name not found in Profile Table Page 578 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set ont port enet (ontenetaddress) poeconfig profile (poeconfig profilename) Description This command is used for managing the Power over Ethernet (poe) feature. Specifically, this command is used to assign a poeconfig profile to an ONT Ethernet port. User Privilege Level: Superuser Required Parameters: poeconfig profile profilename poeconfig This keyword identifies a poeconfig profile. enet ontenetaddress Specifies the ONT Ethernet port address. It takes the following format:, - oltslot-port-channel-enet-index (e.g. au-3-4-16-enet-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ont port enet au-5-1-12-enet-1 poeconfig profile VoIP_port This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Maximum poe power allocation limit for ONT has been exceeded ONT Invalid port ONT is in wrong state for this request Profile name not found in Profile Table Profile settings not supported on this ONT Page 579 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile enetport default-name (name) Description Sets the name of the profile to use as the default for all new ONT Ethernet port settings. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values default-name = qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> set profile enetport default-name alpha This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 580 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile enetport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dot1x (enable | disable) autodetect (autodetect) Description Sets an entry of the Ethernet port profile table. If some of the attributes are not specified, the default values will be used. This profile may be applied to any Ethernet port. Initially, each Ethernet port is assigned the default profile that sets all attributes to their defaults. To apply a different profile to a Ethernet port, refer to the "set port ont" command. Profiles cannot be modified once they are set. Individual profile names may be deleted using the "del profile" command. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: arc {enable | disable} Indicates the ARC (alarm reporting control) setting (enable or disable). If set to disable, alarms will be immediately raised. If set to enabled, the alarms will be subjected to the arcinterval setting. arcinterval { 0-254 | suppress} Sets the ARC interval in minutes. ARC interval only applies when ARC is set to enable. Alarms are not enabled until an error free signal is detected on the port for the arcinterval. This applies whenever the ONT is reset. Valid values are 0-254, and suppress. Suppress is a special value that indicates infinity, so that alarms are never declared for this port. Note: To apply the change to the ARC Interval after alarms have been enabled for the port, the ONT must be reset. dot1x enable | disable Enable or disable the 802.1x authentication autodetect autodetect Specifies the rate and duplex settings: - auto (autonegotiate rate and duplex mode) - 10full (10 base-T, full duplex) - 10half (10 base-T, half duplex) - 100full (100 base-T, full duplex) - 100half (100 base-T, half duplex) Default Values Page 581 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles arc=enable arcinterval = suppress autodetect = auto dot1x = disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile enetport name alpha arc disable Command completed successfully Example 2: AXS2200> set profile enetport name alpha dot1x enable Command completed successfully Example 3: AXS2200> set profile enetport name alpha arc enable arcinterval 2 dot1x enable autodetect 100full Command completed successfully Error Codes At least one attribute is required to be set Invalid ARC Interval Maximum number of allowed profiles exceeded Name already in use Invalid name Invalid autodetect setting Page 582 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile hcnaport default-name (name) Description Sets the name of the profile to use as the default for all new ONT HCNA port settings. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set profile hcnaport default-name type1 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 583 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile hcnaport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dot1x (enable | disable) Description Sets an entry of the HCNA port profile table. If some of the attributes are not specified, the default values will be used. This profile may be applied to any HCNA port. Initially, each HCNA port is assigned the default profile that sets all attributes to their defaults. To apply a different profile to an HCNA port, refer to the "set port ont" command. Profiles cannot be modified once they are set. Individual profile names may be deleted using the "del profile" command. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: dot1x enable | disable Enable or disable the 802.1x authentication arcinterval { 0-254 | suppress} Sets the ARC interval in minutes. ARC interval only applies when ARC is set to enable. Alarms are not enabled until an error free signal is detected on the port for the arcinterval. This applies whenever the ONT is reset. Valid values are 0-254, and suppress. Suppress is a special value that indicates infinity, so that alarms are never declared for this port. Note: To apply the change to the ARC Interval after alarms have been enabled for the port, the ONT must be reset. arc {enable | disable} Indicates the ARC (alarm reporting control) setting (enable or disable). If set to disable, alarms will be immediately raised. If set to enabled, the alarms will be subjected to the arcinterval setting. Default Values arc=enable arcinterval=suppress (255) Confirmation Message Example(s) Example 1: AXS2200> set profile hcnaport name alpha arc enable arcinterval 5 Command completed successfully Page 584 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles Error Codes Invalid name Invalid ARC Interval Name already in use At least one attribute is required to be set Maximum number of allowed profiles exceeded Page 585 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile mocaport default-name (name) Description Sets the name of the profile to use as the default for all new ONT MoCA port settings. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set profile mocaport default-name type1 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 586 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile mocaport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) privacy ((enable | disable)) password (pwd) dot1x (enable | disable) Description Sets an entry of the MoCA port profile table. If some of the attributes are not specified, the default values will be used. This profile may be applied to any MoCA port. Initially, each MoCA port is assigned the default profile that sets all attributes to their defaults. To apply a different profile to a MoCA port, refer to the "set port ont" command. Profiles cannot be modified once they are set. Individual profile names may be deleted using the "del profile" command. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: arc {enable | disable} Indicates the ARC (alarm reporting control) setting (enable or disable). If set to disable, alarms will be immediately raised. If set to enabled, the alarms will be subjected to the arcinterval setting. arcinterval { 0-254 | suppress} Sets the ARC interval in minutes. ARC interval only applies when ARC is set to enable. Alarms are not enabled until an error free signal is detected on the port for the arcinterval. This applies whenever the ONT is reset. Valid values are 0-254, and suppress. Suppress is a special value that indicates infinity, so that alarms are never declared for this port. Note: To apply the change to the ARC Interval after alarms have been enabled for the port, the ONT must be reset. privacy (enable | disable) Privacy Mode for Moca networks. If set to enable, a password has to be provided, which is used to create static encryption keys for access of the Moca network. password pwd 17 decimal digit long password used for link layer security in a Moca network dot1x enable | disable Enable or disable the 802.1x authentication Default Values Page 587 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles arc=enable arcinterval=suppress (255) freqmask=0x00000100 (1000 MHz WAN) - not user settable in this release privacy=enable password=00066947388374966 dot1x= disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile mocaport name alpha arc enable arcinterval 5 Command completed successfully Example 2: AXS2200> set profile mocaport name beta privacy enable password 00066947388374966 Command completed successfully Example 3: AXS2200> set profile mocaport name delta privacy disable Command completed successfully Example 4: AXS2200> set profile mocaport name delta dot1x enable Command completed successfully Error Codes Invalid name Command Denied - Password provided without setting privacy mode At least one attribute is required to be set Invalid ARC Interval Name already in use Maximum number of allowed profiles exceeded Command Denied - Cannot enable Moca privacy mode without valid Moca password Invalid Moca privacy password Page 588 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile poeconfig default-name (poeconfigname) Description This command is used for managing the Power Over Ethernet (poe) feature. Specifically, this command is used to assign an existing poeconfig profile as the default poeconfig port profile. Note that the system will automatically create a default poeconfig port profile with the name of "qbdef"; the system default settings for qbdef are "poe disabled" and "7.0 Watts power allocation". (When poe is disabled, no poe power is allocated to the port.) Note: The system will not allow a poeconfig profile to be configured as the default profile if within the given poeconfig profile: - the poe state is "enable" and - the maxpower setting is greater than 7.6 Watts. User Privilege Level: Superuser Required Parameters: default-name poeconfigname Defines the name of the default poeconfig profile Default Values qbdef Confirmation Message This will change the default poeconfig port profile used with all new ont-templates. Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> set profile poeconfig default-name alpha This will change the default poeconfig port profile used with all new ont-templates. Do you wish to continue? y | n >y Command completed successfully Error Codes Profile name not found in Profile Table Maximum poeconfig power limit exceeded Page 589 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile poeconfig name (poeconfigname) state ({enable | disable}) maxpower ({0.2 - 30.0}) Description This command is used for managing the Power over Ethernet (poe) ONT feature. Specifically, this command is used to create a new poeconfig profile with the following settings: - state({enable|disable}) : This sets the admin state of the poe feature for a port. Note that this is independent of the admin state for the general ethernet operations. - maxpower ({0.2 - 30.0}) : This specifies the amount of power that is allocated to the port. The number entered must be divisible by 0.2. Note that by definition, the amount of max power allocated to a port = the maximum amount of power that the ONT will deliver to a powered device subtending the port. Note that the ONT will not allocate power on a port for which poe is in the disabled state. User Privilege Level: Superuser Required Parameters: name poeconfigname The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). maxpower {0.2 - 30.0} PoE max power threshold in R7.2.1 and on. Default Values state=disable maxpower=7.0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile poeconfig name voip_port state enable maxpower 15.4 Command completed successfully Page 590 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles Error Codes Invalid Maxpower specified. Invalid name Maximum number of allowed profiles exceeded Name already in use Name too long Page 591 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile potsport default-name (name) Description Sets the name of the profile to use as the default for all new ONT POTS port settings. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values default-name = qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> set profile potsport default-name potstype1 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Error Codes Profile name not found in Profile Table Page 592 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile potsport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dropphy (value) nogrant (value) txgain (value) rxgain (value) Description Sets an entry of the POTS port profile table. If some of the attributes are not specified, the default values will be used. At least one attribute is required. This profile may be applied to any POTS port. Initially, each POTS port is assigned the default entry that sets all attributes to their defaults. To specify a different POTS profile for a POTS port, refer to the "set port ont" command. Profiles cannot be modified once they are set. Individual profile names may be deleted using the "del profile" command. Note that the reboot hold POTS bias voltage setting is performed via the ONT profile and applied to all POTS ports. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: arc {enable | disable} Indicates the ARC (alarm reporting control) setting (enable or disable). If set to disable, alarms will be immediately raised. If set to enabled, the alarms will be subjected to the arcinterval setting. arcinterval { 0-254 | suppress} Sets the ARC interval in minutes. ARC interval only applies when ARC is set to enable. Alarms are not enabled until an error free signal is detected on the port for the arcinterval. This applies whenever the ONT is reset. Valid values are 0-254, and suppress. Suppress is a special value that indicates infinity, so that alarms are never declared for this port. Note: To apply the change to the ARC Interval after alarms have been enabled for the port, the ONT must be reset. dropphy value This attribute is used for compatibility with home security systems, and is the number of seconds that the POTS bias voltage will be maintained upon detection of a loss of physical connectivity with the OLT. Valid values are 0-65535 seconds. nogrant value This attribute is used for compatibility with home security systems. When no PON grants have been allocated for this number of seconds, then the POTS bias voltage will be dropped. Valid values are 0-65535 seconds. Page 593 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA txgain Provisioning - Port Profiles value This attribute is used to set the transmit gain (A/D direction) for a POTS line in dB. Valid values are -11 to 0 in 1 dB increments. rxgain value This attribute is used to set the receive gain (D/A direction) for a POTS line in dB. Valid values are -11 to 0 in 1 dB increments. Default Values arc = disable arcinterval = 0 signalcode = loopstart impedance = 600 (not settable by user) dropphy = 60 nogrant = 60 txgain = -2 rxgain = -4 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile potsport name potstype2 arc disable dropphy 75 nogrant 600 Command completed successfully Error Codes Invalid name Invalid rxgain value Invalid txgain value Invalid ARC Interval Name already in use At least one attribute is required to be set Invalid dropphy value Invalid nogrant value Maximum number of allowed profiles exceeded Page 594 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile vdslport default-name (name) Description Sets the name of the profile to use as the default for all new ONT VDSL port settings. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values default-name=qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set profile vdslport default-name alpha This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 595 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile vdslport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) dot1x (enable | disable) Description Sets an entry of the VDSL port profile table. If some of the attributes are not specified, the default values will be used. When ARCINTERVAL = 255 supress alarms This profile may be applied to any VDSL port. Initially, each VDSL port is assigned the default profile that sets all attributes to their defaults. To apply a different profile to a VDSL port, refer to the "set port ont" command. Profiles cannot be modified once they are set. Individual profile names may be deleted using the "del profile" command. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: arc {enable | disable} Indicates the ARC (alarm reporting control) setting (enable or disable). If set to disable, alarms will be immediately raised. If set to enabled, the alarms will be subjected to the arcinterval setting. arcinterval { 0-254 | suppress} Sets the ARC interval in minutes. ARC interval only applies when ARC is set to enable. Alarms are not enabled until an error free signal is detected on the port for the arcinterval. This applies whenever the ONT is reset. Valid values are 0-254, and suppress. Suppress is a special value that indicates infinity, so that alarms are never declared for this port. Note: To apply the change to the ARC Interval after alarms have been enabled for the port, the ONT must be reset. dot1x enable | disable Enable or disable the 802.1x authentication Default Values arc=enable arcinterval = suppress dot1x = disable Confirmation Message Command completed successfully Example(s) Example 1: Page 596 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles AXS2200> set profile vdslport name type2 arc disable Command completed successfully Example 2: AXS2200> set profile vdslport name type2 dot1x enable Command completed successfully Error Codes Invalid name Name already in use Invalid ARC Interval At least one attribute is required to be set Maximum number of allowed profiles exceeded Page 597 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile videoport default-name (name) Description Sets the name of the profile to use as the default for all new ONT video port settings. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values default-name=qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set profile videoport default-name novidalarms This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 598 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles set profile videoport name (name) arc ({enable | disable}) arcinterval ({ 0-254 | suppress}) agcoffset (value) analogch (value) digitalch (value) shutdown_tmr (value) Description Sets an entry of the Video port profile table. If some of the attributes are not specified, the default values will be used. At least one attribute is required. Note: If agcoffset, analogch, and digitalch are all provided in one single command, the system will determine if any of the two channel numbers is not zero and use those to calculate the optimal AGC Offset. If both channel numbers are zero, the provided agcoffset value will be used as direct setting (provided the range is valid). This profile may be applied to any RF port that supports video. Initially, each Video port is assigned the default entry that sets all attributes to their defaults. To specify a different profile for a video port, refer to the "set port ont" command. Profiles cannot be modified once they are set. Individual profile names may be deleted using the "del profile" command. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: shutdown_tmr value Specifies the time interval from the moment the ONT detects a loss of communication to OLT, till the video service is disabled on the ONT. Valid values are 0 - 48 hours. analogch value Number of Analog channels in the RF Video system. Valid range is 0 - 82 digitalch value Number of digital channels in the RF Video system. Valid range is 0 - 135 arc {enable | disable} Indicates the ARC (alarm reporting control) setting (enable or disable). If set to disable, alarms will be immediately raised. If set to enabled, the alarms will be subjected to the arcinterval setting. arcinterval { 0-254 | suppress} Sets the ARC interval in minutes. ARC interval only applies when ARC is set to enable. Alarms are not enabled until an error free signal is detected on the port for the arcinterval. This applies whenever the ONT is reset. Page 599 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles Valid values are 0-254, and suppress. Suppress is a special value that indicates infinity, so that alarms are never declared for this port. Note: To apply the change to the ARC Interval after alarms have been enabled for the port, the ONT must be reset. agcoffset value Indicates the value of the automatic gain control (AGC) offset. Valid values are from -12.7 to 12.7 in steps of 0.1 dB. Default Values arc=disable arcinterval = supress AGC offset = 0 shutdown_tmr = 48 analogch = 0 digitalch = 0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile videoport name alpha analogch 34 digitalch 55 Command completed successfully Example 2: (set shutdown timer) AXS2200> set profile videoport name delta shutdown_tmr 10 Command completed successfully Error Codes Invalid name Invalid shutdown timer At least one attribute is required to be set Invalid AGC offset Invalid ARC Interval Name already in use Invalid Number of Channels Maximum number of allowed profiles exceeded Page 600 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles show profile enetport name (name) Description Displays the contents of the profile table for Ethernet ports. If no name is provided, all entries will be shown. The following information is shown: Name: The name of the entry in the Ethernet port profile table ARC: enable, disable ARC Int (ARC Interval): given in minutes; only used if ARC is set to enable, or suppress to indicate alarms are always suppressed. dot1x: enable, disable Autodetect: auto, 10full, 10half, 100full, 100half The default profile is indicated at the top of the report, and by an asterisk after the name. User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values If no name provided, all names in the profile will be shown. Confirmation Message Command completed successfully Example(s) Example 1: (all entries) AXS2200> show profile enetport =============================================================================== ENETPORT PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default: enettype1 Name -------------------qbdef enettype1* enettype2 ARC ------enable enable enable ARC Interval -------suppress 0 0 dot1x -------disable disable disable Autodetect ---------auto auto 100full =============================================================================== Command completed successfully Example 2: (specific entry) AXS2200> show profile enetport name qbdef =============================================================================== ENETPORT PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Page 601 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Default: Provisioning - Port Profiles enettype1 Name ARC -------------------- ------qbdef enable ARC Interval -------suppress dot1x -------disable Autodetect ---------auto =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 602 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles show profile hcnaport name (name) Description Displays the contents of the profile table for HCNA port profiles. If no name is provided, all entries will be shown. Displayed values are: Name: The name of the entry in the HCNA port profile table ARC: enable, disable ARC Interval: given in minutes, or suppress to indicate that alarms are always suppressed (only used if ARC is set to enable). dot1x: {enable | disable} The default profile is indicated at the top of the report, and by an asterisk after the name. User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Example(s) Example 1: AXS2200> show profile hcnaport =============================================================================== HCNAPORT PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name -------------------qbdef* alphahcna ARC --en en ARC Interval -------suppress suppress dot1x -------disabled disabled =========================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 603 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles show profile mocaport name (name) Description Displays the contents of the profile table for MoCA port profiles. If no name is provided, all entries will be shown. Displayed values are: Name: The name of the entry in the MoCA port profile table ARC: enable, disable ARC Interval: given in minutes, or suppress to indicate that alarms are always suppressed (only used if ARC is set to enable). FreqMask: bitmask for the frequency range displayed in hexidecimal (32 bits). This is not user settable - 0x00000100 indicates the 1000 MHz WAN channel. Privacy: enable, disable Password: 17 digit password dot1x: {enable | disable} The default profile is indicated at the top of the report, and by an asterisk after the name. NOTE: The Power level setting is configured on an individual MoCA port basis. Refer to the command "set ont port moca (address) pwrcontrol {auto | manual} pwrlevel {1-10}" User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show profile mocaport =============================================================================== MOCAPORT PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name -------------------qbdef* alphamoca ARC --en en ARC Interval -------suppress suppress FreqMask -------00000100 00000100 Priv ---en en Password -----------------00066947388374966 12345678901234567 dot1x ------disable disable =========================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 604 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles show profile poeconfig name (poeconfigname) Description This command is used in support of the Power over Ethernet feature. Specifically, this command is used to display the settings for a specified poeconfig profile. User Privilege Level: Superuser Optional Parameters: name poeconfigname The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values If no name is provided, all poeconfig profile names will be displayed. Confirmation Message Command completed successfully Example(s) ________________________________________________________________________________ Example 1: AXS2200> show profile poeconfig VoIP =============================================================================== POEConfig PROFILE REPORT DATE: 03/17/2010 TIME: 16:08:22 =============================================================================== Name -------------------VoIP State ---------enable Maxpower (Watts) ------------15.4 =============================================================================== Command completed successfully ________________________________________________________________________________ Example 2: AXS2200> show profile poeconfig =============================================================================== POEConfig PROFILE REPORT DATE: 03/17/2010 TIME: 16:08:22 =============================================================================== Default: qbdef Name -------------------qbdef VoIP WAP camera State ---------disable enable enable enable Maxpower (Watts) ------------7.0 15.4 30.0 7.0 =============================================================================== Command completed successfully Page 605 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles Error Codes Profile name not found in Profile Table Page 606 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles show profile potsport name (name) Description Displays the contents of the profile table for POTS ports. If no name is provided, all entries will be shown. The following information is shown: Name: The name of the entry in the POTS port profile table ARC: enable, disable ARC Int (ARC Interval): given in minutes, only used if ARC is set to enable Signal Code: loopstart Imp (Impedance): 600 ohms (not settable) Drop Phy (Drop phy hold POTS bias): 0-65535 seconds No Grant (No grant hold POTS bias): 0-65536 seconds Transmit A/D Gain: -11 to 0 decibels Receive D/A Gain: -11 to 0 decibels The default profile is indicated at the top of the report, and by an asterisk after its name in the report, if it is listed. User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values If no name provided, all names in the profile will be shown Confirmation Message Command completed successfully Example(s) Example 1: (all entries) AXS2200> show profile potsport =============================================================================== POTSPORT PROFILE REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Default: qbdef Name -------------------qbdef* longloopimp ARC ------disable enable ARC Int ---0 0 Signal Code ----------loopstart loopstart Imp --600 600 Drop Phy ---60 60 No Grant ----60 60 RX TX Gain Gain ---- ----2 -4 -5 -3 =============================================================================== Command completed successfully Example 2: (one entry by name) AXS2200> show profile potsport name qbdef =============================================================================== POTSPORT PROFILE REPORT Page 607 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Default: qbdef Name -------------------qbdef* ARC ------disable ARC Int ---0 Signal Code ----------loopstart Imp --600 Drop Phy ---60 No Grant ----60 RX TX Gain Gain ---- ----2 -4 =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 608 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles show profile vdslport name (name) Description Displays the contents of the profile table for VDSL ports. If no name is provided, all entries will be shown. The following information is shown: Name: The name of the entry in the VDSL port profile table ARC: enable, disable ARC Interval: given in minutes, only used if ARC is set to enable dot1x: enable or disable The default profile is indicated at the top of the report, and by an asterisk after its name in the report, if it is listed. User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values If no name provided, all names in the profile will be shown Confirmation Message Command completed successfully Example(s) Example 1: (all entries) AXS2200> show profile vdslport =============================================================================== VDSLPORT PROFILE REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Default: qbdef Name -------------------qbdef* soak5 ARC ---------disable enable ARC Interval -------suppress 5 dot1x ---------disable disable =============================================================================== Command completed successfully Example 2: (one entry by name) AXS2200> show profile vdslport name qbdef =============================================================================== VDSLPORT PROFILE REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Default: qbdef ARC Page 609 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Name -------------------qbdef* Provisioning - Port Profiles ARC ---------enable Interval -------suppress dot1x --------disable =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 610 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles show profile videoport name (name) Description Displays the contents of the profile table for Video ports. If no name is provided, all entries will be shown. The following information is shown: Name: The name of the entry in the Video port profile table ARC: enable, disable ARC Interval: given in minutes, only used if ARC is set to enable AGC Offset: Given in dB AnalogCh: Number of analog channels DigitalCh: Number of digital channels Out-of-range Shutdown Timer: given in hours The default profile is indicated at the top of the report, and by an asterisk after its name in the report, if it is listed. User Privilege Level: Operator Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values If no name provided, all names in the profile will be shown Confirmation Message Command completed successfully Example(s) Example 1: (all entries) AXS2200> show profile videoport =============================================================================== VIDEOPORT PROFILE REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Default: qbdef Name -------------------qbdef* typea typeb ARC --dis en en ARC Int --0 255 255 AGC Offset -----0 -1.3 2.7 AnCh ---33 0 0 Out-of-range Shutdown Tmr DigCh (hours) ----- ------55 48 0 48 0 0 =============================================================================== Command completed successfully Example 2: (one entry by name) AXS2200> show profile videoport name qbdef =============================================================================== VIDEOPORT PROFILE REPORT DATE: 08/17/2004 TIME: 16:08:22 Page 611 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Port Profiles =============================================================================== Default: qbdef Name -------------------qbdef* ARC --dis ARC Int --0 AGC Offset AnCh ------ ---0 33 Out-of-range Shutdown Tmr DigCh (hours) ----- -------55 48 =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 612 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 613 Provisioning - Port Profiles AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports Provisioning - Ports set port ds1 (ds1aid) framing ({esf | sf}) Description Sets the framing for the T1CAS DS1 Interface on the Voice Gateway. ESF framing supports additional DS1 loopback capabilities from the remote end per ANSI T1.403. SF framing does not. To change the framing, the T1CAS DS1 interface must have all POTS channels deleted first. This command is valid only for DS1 interfaces configured for T1CAS. It is not valid for DS1's that are configured for GR-303 or TR-08 since the framing is configured automatically for those interfaces. DS1's that are not assigned to GR-303, TR-08 or T1CAS are not assigned framing (defaults to clear channel). User Privilege Level: Superuser Required Parameters: framing {esf | sf} Selects the type of DS1 framing. ds1 ds1aid Identifies the DS1 physical interface port on the Voice Gateway card. For example: au-1-1 Default Values For T1CAS interfaces, default framing = ESF Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port ds1 au-1-1 framing sf This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes POTS channel(s) are configured DS1 Interface not configured for t1cas Invalid ds1 Interface Page 614 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports set port ds1 (ds1aid) linecoding ({b8zs | ami}) Description Sets the linecoding for the DS1 interface to the Voice Gateway card. This command is valid for DS1s that are not assigned to a GR-303 interface. User Privilege Level: Superuser Required Parameters: linecoding {b8zs | ami} Identifies the signal linecoding. ds1 ds1aid Identifies the DS1 physical interface port on the Voice Gateway card. For example: au-1-1 Default Values For T1CAS or GR-303, defaults to b8zs For TR-08, defaults to ami Otherwise defaults to b8zs Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port ds1 au-1-1 linecoding ami This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid for a protection slot of a 1+1 protected group - select working slot Invalid linecoding Invalid port DS1 is configured for GR-303 and does not support this setting Page 615 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports set port ds1 (slot-port) cablelength (feet-val) Description Sets the approximate length of the physical DS1 cable from the interfacing equipment to the Voice Gateway card. User Privilege Level: Superuser Required Parameters: ds1 slot-port Identifies the DS1 physical interface port on the Voice Gateway card. For example: au-1-1 cablelength feet-val The value entered indicates the range of feet of cable from the system to interfacing device. The value entered is interpreted by the system to have a cable length within the range associated with the value. Valid ranges are: 1-133 133-266 266-399 399-533 533-644 Default Values 1-133 Confirmation Message This affects the transmit attenuation settings for the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port vg-ds1 au-1-1 cablelength 133-266 This affects the transmit attenuation settings for the port. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid cablelength Invalid port Page 616 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports set port gige (slot-port) stag-ethtype ({0x88a8 | 0x8100 | 0x9100 | 0x9200 | 0x8200 | 0x8500}) Description Sets the Ethertype for the S-tags on a gige port. If the gige port is in a LAG group, then the Ethertypes have to all be the same and they can't be changed. User Privilege Level: Admin Required Parameters: gige slot-port This idenitifies the gige port on the AXS2200 chassis. {0x88a8 | 0x8100 | 0x9100 | 0x9200 | 0x8200 | 0x8500} stag-ethtype Value of Ethertype to be applied to the Tagged packet The default is 0x8100. The standard calls for 0x88a8, however most switches don't support that yet. Default Values stag-ethtype = 0x8100 Confirmation Message This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port gige sw-b-1 stag-ethtype 0x8100 This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Example 2 (10GigE port on Ethernet card): AXS2200> set port gige au-11-1 stag-ethtype 0x8100 This will affect services on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid port Invalid slot VLAN - Can't change stag-ethertype when in a LAG group VLAN- Invalid can't change stag-ethtype when a connection exists Page 617 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports set port gige (slot-port) state ({enable | disable}) Description Used to configure the administrative state of the GigE port(s). When the port is set to admin state disable, any connections that are defined will be affected. When disabled, the system will: - turn off the transmit laser for the port - not declare these port alarms: Link Failure, Auto-Negotiation Error, or any SFP optics alarms. User Privilege Level: Superuser Required Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). gige slot-port Identifies the GigE port. Default Values enable Confirmation Message This will affect all services carried on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set port gige sw-b-1 state disable This will affect all services carried on the port. Do you want to continue? y | n >y Command completed successfully Example 2 (10GigE port on Ethernet card): AXS2200> set port gige au-11-1 state disable This will affect all services carried on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid port Invalid slot Page 618 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports show port ds1 ({slot-port | slot}) Description Displays the port settings and states for the Voice Gateway card. The following information is shown: - DS1 AID: Provides the AID of the DS1. The protection port will additionally be listed, if applicable. (eg. au-1-1 / au-2-1) - AdminState: the administrative state of the ds1 (enable, disable). The system automatically sets the admin state to enable when the DS1 is assigned to a GR-303, TR-08 or T1CAS interface, or when the DS1 is assigned to a clear channel connection. It is set to disable (unused) otherwise. - OperState: the Operating state of the ds1 (up, down) - Cablelength: the length of cable from the physical port to the interfacing equipment: 1-133, 133-266, 266-399, 399-533, 533-644 - Framing: esf, sf, or n/a (not applicable to DS1s that aren't assigned to GR-303, TR-08 or T1CAS), depending on the Voice Gateway protocol: T1CAS: user provisioned (defaults to esf) GR-303: automatically set to esf only TR-08: automatically set to slc-96 for Shelf A, or d4 for shelves 2-4. Clear Channel/Unassigned: - for not applicable/clear channel DS1. - Linecoding: Setting depends on Voice Gateway protocol: T1CAS: user provisioned (defaults to b8zs) GR-303: automatically set to b8zs only TR-08: user provisioned (defaults to ami) Clear Channel/Unassigned: user provisioned (defaults to b8zs) - (FUTURE) Clock: Clock recovery setting depends on Voice Gateway protocol: T1CAS, GR-303, TR-08: - for not applicable Clear Channel/Unassigned: user provisioned adaptive, srts-m (SRTS-master), srts-s (SRTS-slave) (defaults to adaptive) - VG Protocol: t1cas, gr-303, or tr-08. To view the active card of a protected pair, consult the "show eqptsw" report. User Privilege Level: Operator Required Parameters: ds1 {slot-port | slot} Identifies the DS1 port, or all DS1 ports on a card. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (all ports for one slot, protected voice gateway cards) AXS2200> show port ds1 au-1 =============================================================================== DS1 Port Report DATE: 7/28/2004 TIME: 20:15:40 Page 619 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports =============================================================================== Port --------------au-1-1/au-2-1 au-1-2/au-2-2 au-1-3/au-2-3 au-1-4/au-2-4 au-1-5/au-2-5 au-1-6/au-2-6 au-1-7/au-2-7 au-1-8/au-2-8 au-1-9/au-2-9 . . . au-1-56/au-2-56 Admin State ------enable enable enable enable enable enable enable enable enable Oper State ----up up up up up up up up up Cable Length ------133-266 133-266 133-266 133-266 133-266 266-399 266-399 266-399 266-399 Framing ------esf esf esf esf esf slc-96 d4 d4 d4 Line Coding -----b8zs b8zs b8zs b8zs b8zs ami ami ami ami Clock -------- VG Protocol -------gr303 gr303 gr303 gr303 gr303 tr08 tr08 tr08 tr08 disable down 133-266 esf b8zs - gr303 =============================================================================== Command completed successfully Example 3: (individual port, unprotected voice gateway card) AXS2200> show port ds1 au-1-1 =============================================================================== DS1 Port Report DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== Port --------------au-1-1/au-2-1 Admin State ------enable Oper State ----up Cable Length ------133-266 Framing ------esf Line Coding -----b8zs Clock -------- VG Protocol -------gr303 =============================================================================== Command completed successfully Error Codes Invalid port Invalid slot Voice gateway not equipped Invalid ds1 Interface Page 620 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports show port gige (slot-port) Description Displays all of the configuration parameters associated with the specified GigE port(s). For each port: - Admin State (enable, disable) - Operating State (up, down) -- the current operational state of the port - MAC Address -- MAC address for GigE port (6 bytes in Hexadecimal) - LA Group -- Link Aggregation group (lag-n) or none - Loopback Conf/Oper -- Loopback configured state {fe, none} / loopback operating state {ne, fe, none} - stag-ethtype -- The Ethertype value that is used for the S-tag. - MSTP Member -- (yes, no or -) - Availability -- the availability of the port: autoErr (autonegotiation error) avail (available) noAvail (not available) unk (unknown) To see the LACP settings for the GigE port or ports, consult the command "show lagroup". User Privilege Level: Operator Required Parameters: gige slot-port This idenitifies the gige port on the AXS2200 chassis. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show port gige sw-a-2 =============================================================================== GigE Port Report DATE: 06/01/2007 TIME: 20:15:40 =============================================================================== Admin Oper Loopback Stag Port State State MAC Address LAGroup Conf/Oper etype ------ ------- ----- ----------------- ------- --------- -----sw-a-2 enable up 00-11-43-A1-98-55 none none/none 0x8100 MSTP member -----yes Availability ------avail =============================================================================== Command completed successfully Example 2: AXS2200> show port gige sw-a-3 =============================================================================== Page 621 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports GigE Port Report DATE: 06/01/2007 TIME: 20:15:40 =============================================================================== Admin Oper Loopback Stag MSTP AvailPort State State MAC Address LAGroup Conf/Oper etype member ability ------ ------- ----- ----------------- ------- --------- ------ ------ ------sw-a-3 enable up 00-11-43-A1-98-56 lag-1 none/none 0x8100 no avail =============================================================================== Command completed successfully Example 3: (GigE mode set to 10GigE) AXS2200> show port gige sw-a-2 =============================================================================== GigE Port Report DATE: 06/01/2007 TIME: 20:15:40 =============================================================================== Admin Oper Loopback Stag Port State State MAC Address LAGroup Conf/Oper etype ------ ------- ----- ----------------- ------- --------- -----sw-a-2 disable down 0x8100 MSTP member ------ Availability ------noAvail =============================================================================== Command completed successfully Example 4 (port on Ethernet card): AXS2200> show port gige au-11-2 =============================================================================== GigE Port Report DATE: 06/01/2007 TIME: 20:15:40 =============================================================================== Admin Oper Loopback Stag MSTP AvailPort State State MAC Address LAGroup Conf/Oper etype member ability ------ ------- ----- ----------------- ------- --------- ------ ------ ------au-11-2 enable up 00-11-43-A1-98-55 none none/none 0x8100 yes avail =============================================================================== Command completed successfully Error Codes Invalid port Page 622 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports show port gige-detail (slot-port) Description Displays the detailed configuration parameters associated with the specified GigE port(s). - Port AID Admin State (enable, disable) Oper State (up, down) Type (1000BASE-X full duplex, 10GBASE-X) Availability -- the availability of the port. (autoNegError, available, notAvailable, unknown) Mode MAC Address Link Aggregation Group Configured OAM Loopback Operating OAM Loopback S-Tag Ethertype Pause MSTP Member { yes | no } Hello Time (Cfg): configured hello time if MSTP member, "n/a" if not Hello Time (Current): actual hello time if MSTP member, "n/a" if not Broadcast/Unknown Unicast rate limit (pps): chassis-bmc-rate, 0-14880952 ACL-IP: The name of the configured IP layer Access Control List ACL-MAC: The name of the configured MAC layer Access Control List User Privilege Level: Operator Required Parameters: gige-detail slot-port This idenitifies the gige port on the OLT. Default Values Confirmation Message Command completed successfully Example(s) Example 1: (Single Port) AXS2200> show port gige-detail sw-a-1 =============================================================================== GigE Port Detail Report DATE: 06/01/2007 TIME: 20:15:40 =============================================================================== Port AID: sw-a-1 Admin State: enable Oper State: up Type: 10GBASE-X Availability: available Mode: 1000full MAC Address: 00-11-43-A1-98-55 Link Aggregation Group: none Configured OAM Loopback none Operating OAM Loopback: none S-Tag Ethertype: 0x8100 Page 623 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Ports Pause : enable MSTP Member: yes Hello Time (Cfg): Hello Time (Current): Broadcast/Unknown Unicast rate (pps): chassis-bmc-rate ACL-IP: qbdef ACL-MAC: qbdef =============================================================================== Command completed successfully Example 2: (port on Ethernet card) AXS2200> show port gige-detail au-11-1 =============================================================================== GigE Port Detail Report DATE: 06/01/2007 TIME: 20:15:40 =============================================================================== Port AID: au-11-1 Admin State: enable Oper State: up Type: 10GBASE-X Availability: available Mode: 1000full MAC Address: 00-11-43-A1-98-55 Link Aggregation Group: none Configured OAM Loopback none Operating OAM Loopback: none S-Tag Ethertype: 0x8100 Pause : enable MSTP Member: yes Hello Time (Cfg): Hello Time (Current): Broadcast/Unknown Unicast rate (pps): chassis-bmc-rate ACL-IP: qbdef ACL-MAC: qbdef =============================================================================== Command completed successfully Error Codes Invalid port Page 624 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 625 Provisioning - Ports AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS Provisioning - QOS del profile dscpmap name (dscpmapname) Description Delete dscpmap profie User Privilege Level: Superuser Required Parameters: name dscpmapname Identifies the name of the DSCP map. Can take up to 20 characters in length. Default Values Confirmation Message Command completed successfully Example(s) Example: >del profile dscpmap name PHB Command completed successfully Error Codes Default profiles cannot be deleted Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Name not found Page 626 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS del profile pbitremap name (pbitremapname) Description Delete pbitremap profile User Privilege Level: Superuser Required Parameters: name pbitremapname Identifies the name of the P-bit remap map. Can take up to 20 characters in length. Default Values Confirmation Message Command completed successfully Example(s) Example: > del profile pbitremap name cust1 Command completed successfully Error Codes Name not found Default profiles cannot be deleted Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Page 627 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS set olt-qosconfig all-strict-priority ({enable | disable}) cos0weight ({0-100}) cos1weight ({0-100}) cos2weight ({0-100}) cos3weight ({0-100}) cos4weight ({0-100}) Description If all-strict-priority = enable, then the cos_weights are ignored and all the queues are treated as strict-priority. If all-strict-priority = disable, then this command defines the weighting of the "Weighted Round Robin" (WRR) queues. There are 3 Strict Priority and 5 WRR queues on the OLT. The cos weights have to add up to 100, or the command will be denied. The default is equal weight (20) User Privilege Level: Superuser Required Parameters: all-strict-priority {enable | disable} If enable then all the queues are strict priority. If disable then there are 3 Strict Priority and 5 WRR cos0weight {0-100} Weight of the WRR 0 queue. This is measured in % of the time that this queue shall be serviced. cos1weight {0-100} Weight of the WRR 1 queue. This is measured in % of the time that this queue shall be serviced. cos2weight {0-100} Weight of the WRR 2 queue. This is measured in % of the time that this queue shall be serviced. cos3weight {0-100} Weight of the WRR 3 queue. This is measured in % of the time that this queue shall be serviced. cos4weight {0-100} Weight of the WRR 4 queue. This is measured in % of the time that this queue shall be serviced. Default Values all-strict-priority enable cos0weight 20 cos1weight 20 cos2weight 20 cos3weight 20 cos4weight 20 Confirmation Message WARNING: This changes the OLT QoS Configuration Do you want to continue? y|n >y Command completed successfully. Example(s) Page 628 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS Example 1: AXS2200> set olt-qosconfig cos0weight 20 cos1weight 20 cos2weight 20 cos3weight 20 cos4weight 20 WARNING: This changes the OLT QoS Configuration Do you want to continue? y|n >y Command completed successfully. Error Codes QoS - CoS weight must be <= 100 QoS - Sum of CoS weight must be 100 Page 629 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS set profile dscpmap default-name (name) Description Sets the name of the profile to use as the default for all new ONT settings. If the assigned default profile settings cannot be supported by the ONT hardware, then the profile qbdef will be applied. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values name = qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example: AXS2200> set profile dscpmap default-name onttype1 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Error Codes Profile name not found in Profile Table Page 630 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS set profile dscpmap name (dscpmapname) pbit0 (dscplist) pbit1 (dscplist) pbit2 (dscplist) pbit3 (dscplist) pbit4 (dscplist) pbit5 (dscplist) pbit6 (dscplist) pbit7 (dscplist) Description This command configures the map of DSCP values to P-bit values. The OLT supports at least 16 dscpmap profiles. If an attribute is not provided, then the default value is used for that pbit. The DSCP values to p-bit assignment must be unique. User Privilege Level: Superuser Required Parameters: name dscpmapname Identifies the name of the DSCP map. Can take up to 20 characters in length. Optional Parameters: pbit0 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. For example: 1,20-29,35,44 pbit1 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. For example: 1,20-29,35,44 pbit2 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. For example: 1,20-29,35,44 pbit3 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. For example: 1,20-29,35,44 pbit4 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. For example: 1,20-29,35,44 pbit5 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. For example: 1,20-29,35,44 pbit6 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. Page 631 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS For example: 1,20-29,35,44 pbit7 dscplist dscplist is a 128 character string that can have ranges, and non-contiguous numbers without the use of spaces. For example: 1,20-29,35,44 Default Values Any unspecified DSCP values will be assigned to a pbit value of 0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set profile dscpmap PHB pbit0 0-7 pbit1 8-15 pbit2 16-23 pbit3 24-31 pbit4 32-39 pbit5 40-50 pbit6 51-55 pbit7 56-61 Command completed successfully Error Codes Name already in use Invalid name Pbit0 has invalid dscplist Pbit1 has invalid dscplist Pbit2 has invalid dscplist Pbit3 has invalid dscplist Pbit4 has invalid dscplist Pbit5 has invalid dscplist Pbit6 has invalid dscplist Pbit7 has invalid dscplist Page 632 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS set profile pbitremap default-name (name) Description Sets the default name for pbitremap User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example: > set profile pbitremap cust1_remap This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Error Codes Invalid name Name not found Name too long Page 633 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS set profile pbitremap name (pbitremapname) inpbit0 (pbitvalue) inpbit1 (pbitvalue) inpbit2 (pbitvalue) inpbit3 (pbitvalue) inpbit4 (pbitvalue) inpbit5 (pbitvalue) inpbit6 (pbitvalue) inpbit7 (pbitvalue) Description Defines a mapping from input P-bits to output P-bits. A pbitremap profile can not be changed if it is in-use in an "ont-profile" profile. The mapping does not have to be one-to-one (i.e. all the incoming pbits could map to one value in the upstream direction). If the mapping is not one-to-one, then in the downstream direction, if there is a VLAN translation, then the outgoing p-bit value shall be the highest value of the many-to-one mapping. In the downstream direction, if no mapping exists, then it gets the P-bit value assigned to untagged upstream packets as specified by the l2config profile. User Privilege Level: Superuser Required Parameters: name pbitremapname Identifies the name of the P-bit remap map. Can take up to 20 characters in length. inpbit0 pbitvalue Map an input P-bit value of 0 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 inpbit1 pbitvalue Map an input P-bit value of 1 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 inpbit2 pbitvalue Map an input P-bit value of 2 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 inpbit3 pbitvalue Map an input P-bit value of 3 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 inpbit4 pbitvalue Map an input P-bit value of 4 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 inpbit5 pbitvalue Map an input P-bit value of 5 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 inpbit6 pbitvalue Map an input P-bit value of 6 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 inpbit7 pbitvalue Map an input P-bit value of 7 to output P-bit value of "pbitvalue" 0<= pbitvalue <= 7 Page 634 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS Default Values Confirmation Message Command completed successfully Example(s) Example (Reverse the priority bits) >set profile pbitremap name cust1 inpbit0 7 inpbit1 6 inpbit2 5 inpbit3 4 inpbit4 3 inpbit5 2 inpbit6 1 inpbit7 0 Command completed successfully Error Codes Invalid name Name already in use QoS - Pbit value out of range Page 635 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS show olt-qosconfig Description Displays the QoS parameters on the OLT The following parameters are listed: all-strict-priority = {disable | enable} WRR weights for each CoS {0-100} There are 3 Strict Priority Queues (SP) and five Weighted Round Robin (WRR) queues. User Privilege Level: Operator Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show olt-qosconfig =============================================================================== OLT QoS Configuration REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== all-strict-priority = disable cos0 cos1 cos2 cos3 cos4 weight weight weight weight weight ------ ------ ------ ------ -----20 20 20 20 20 =============================================================================== Command completed successfully Error Codes Page 636 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS show profile dscpmap name (dscpmapname) Description Displays the contents of the DSCP map profile specified, or if none specified, displays all DSCP map profiles one after the other. The assigned system default DSCP map profile is provided at the top of either the individual or summary report. The OLT supports at least 16 DSCP map profiles. User Privilege Level: Operator Optional Parameters: name dscpmapname Identifies the name of the DSCP map. Can take up to 20 characters in length. Default Values If no name provided, all names in the profile will be shown. Confirmation Message Command completed successfully Example(s) Example 1: (specific entry) AXS2200> show profile dscpmap name PHB =============================================================================== DSCP Map PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name: PHB pbit0: 0,1,2,3,4,5,6,7 pbit1: 8,9,10,11,12,13,14,15 pbit2: 16,17,18,19,20,21,22,23 pbit3: 24,25,26,27,28,29,30,31 pbit4: 32,33,34,35,36,37,38,39 pbit5: 40,41,42,43,44,45,46,47,48,49,50 pbit6: 51,52,53,54,55 pbit7: 56,57,58,59,60,61 =============================================================================== Command completed successfully Example 2: (all entries) AXS2200> show profile dscpmap =============================================================================== DSCP Map PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name: qbdef pbit0: 0,1,2,3,4,5,6,7 pbit1: 8,9,10,11,12,13,14,15 Page 637 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA pbit2: pbit3: pbit4: pbit5: pbit6: pbit7: Provisioning - QOS 16,17,18,19,20,21,22,23 24,25,26,27,28,29,30,31 32,33,34,35,36,37,38,39 40,41,42,43,44,45,46,47 48,49,50,51,52,53,54,55 56,57,58,49,60,61,62,63 -----------------------------------------------------------Name: PHB pbit0: 0,1,2,3,4,5,6,7 pbit1: 8,9,10,11,12,13,14,15 pbit2: 16,17,18,19,20,21,22,23 pbit3: 24,25,26,27,28,29,30,31 pbit4: 32,33,34,35,36,37,38,39 pbit5: 40,41,42,43,44,45,46,47,48,49,50 pbit6: 51,52,53,54,55 pbit7: 56,57,58,59,60,61 =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 638 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS show profile ont-qosconfig name (ontqosconfigname) Description Displays the contents of the ONT QoS Profile specified. The following parameters are listed: all strict priority (enable | disable} mapping between pbits and CoS {0-7} WRR weights for each CoS {0-100} Size of each CoS queue {0-100} VoIP bearer and signaling pbit and DSCP settings IGMP pbit setting ratelimit {enable | disable} There is 1 Strict Priority Queue (SP) and three Weighted Round Robin (WRR) queues (all-strict-priority = disable) or four Strict Priority queues (all-strict-priority = enable) The queue sizes for strict priority queues are set internally, the profile settings are ignored. User Privilege Level: Operator Optional Parameters: name ontqosconfigname ONT QoS Configuration profile Default Values If no name provided, all names in the profile will be shown. Confirmation Message Command completed successfully Example(s) Example 1: (specific entry) AXS2200> show profile ont-qosconfig name gold =============================================================================== ONT QoS Configuration PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef all map map map map map map map map strict pbit0 pbit1 pbit2 pbit3 pbit4 pbit5 pbit6 pbit7 Name priority cos cos cos cos cos cos cos cos ------------------- -------- ----- ----- ----- ----- ----- ----- ----- ----gold enable 0 0 1 1 2 2 3 3 Name ------------------gold voip cos0 cos1 cos2 bear weight weight weight pbit ------ ------ ------ ----33 33 34 6 voip sig pbit ---5 voip bear dscp ---24 voip sig igmp rate dscp pbit limit ---- ---- -----46 4 enable =============================================================================== Command completed successfully Page 639 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS Example 2: (all entries) AXS2200> show profile ont-qosconfig =============================================================================== ONT QoS Configuration PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef all map map map map map map map map strict pbit0 pbit1 pbit2 pbit3 pbit4 pbit5 pbit6 pbit7 Name priority cos cos cos cos cos cos cos cos ------------------- -------- ----- ----- ----- ----- ----- ----- ----- ----gold enable 0 0 1 1 2 2 3 3 tls disable 0 0 0 1 2 2 3 3 qbdef* enable 0 0 1 1 2 3 3 3 Name ------------------gold tls qbdef* cos0 cos1 cos2 weight weight weight ------ ------ -----33 33 34 10 40 50 33 33 34 voip bear pbit ---7 6 6 voip sig pbit ---7 5 5 voip bear dscp ---46 24 24 voip sig igmp rate dscp pbit limit ---- ---- -----46 7 enable 46 0 enable 46 4 disable =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 640 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS show profile pbitremap name (pbitremapname) Description Displays the contents of the P-bit Remap profile specified, or if none specified, displays all P-bit Remap profiles one after the other. The assigned system default P-bit Remap profile is provided at the top of either the individual or summary report. The OLT supports at least 16 P-bit Remap profiles. User Privilege Level: Operator Optional Parameters: name pbitremapname Identifies the name of the P-bit remap map. Can take up to 20 characters in length. Default Values If no name provided, all names in the profile will be shown. Confirmation Message Command completed successfully Example(s) Example 1: (specific entry) AXS2200> show profile pbitremap name gold =============================================================================== P-bit Remap PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name ------------------qbdef inbit0 inbit1 inbit2 inbit3 inbit4 inbit5 inbit6 inbit7 ------ ------ ------ ------ ------ ------ ------ -----0 1 2 3 4 5 6 7 =============================================================================== Command completed successfully Example 2: (all entries) AXS2200> show profile pbitremap =============================================================================== P-bit Remap PROFILE REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Default = qbdef Name ------------------qbdef cust_1 inbit0 inbit1 inbit2 inbit3 inbit4 inbit5 inbit6 inbit7 ------ ------ ------ ------ ------ ------ ------ -----0 1 2 3 4 5 6 7 1 1 3 3 4 7 7 7 =============================================================================== Page 641 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - QOS Command completed successfully Error Codes Profile name not found in Profile Table Page 642 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 643 Provisioning - QOS AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - Slot Provisioning - Slot set slot (slot) slotname (name) modulename (name) Description Allows the user to define a custom name for both a slot and, if present, a module (board within that slot). Both names can be overwritten at any time. In addition, the modulename will be cleared upon execution of the reset slot command. Setting of modulename will be rejected in case of an empty slot. User Privilege Level: Superuser Required Parameters: slot Specifies the desired slot of the chassis. Optional Parameters: slotname name User defined name of the specified slot in the chassis. Validation: String of up to 20 characters in length, alphanumeric characters including dashes "-", and underscores "_". modulename name User defined name for a module. This equates to a board within a slot Validation: String of up to 20 characters in length, alphanumeric characters including dashes "-", and underscores "_". Default Values slotname="" modulename="" Confirmation Message Command completed successfully Example(s) Example: AXS2200> set slot au-3 slotname vg-slot-rjd modulename zorgon Command completed successfully Error Codes Invalid slot Invalid Module name Invalid Slot name Module name cannot be set on empty slot Page 644 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 645 Provisioning - Slot AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Provisioning - VLAN add vlan-member svid (svlanid) olt (oltwanaid) tx-td (traf-name) rx-td (traf-name) state ({active | inactive}) eth-cfm (state) mepid (value) Description Adds the OLT WAN interface as a member of the VLAN. The command will be rejected if there is insufficient bandwidth available on the WAN interface to meet the CIR in the traffic descriptor for either transmit or receive direction. If Ethernet CFM (IEEE 802.1ag) is enabled, then a Maintenance Endpoint (MEP) is created on the WAN port at the Intra-carrier MD Level for the VLAN member. User Privilege Level: Superuser Required Parameters: olt oltwanaid Indicates the OLT interface: - slot-port for a gige interface - lag-index for a link aggregation group traf-name tx-td Specifies the traffic descriptor for the VLAN member. The transmit direction is from the WAN (i.e. downstream) traf-name rx-td Specifies the traffic descriptor for the VLAN member. The receive direction is to the WAN (upstream) svlanid svid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Optional Parameters: {active | inactive} state Sets the state to active or inactive. state eth-cfm Sets the Ethernet CFM admin state. Valid values are: - enable - disable mepid value Sets the MEP ID used for Ethernet CFM. Valid values are: {1-8191}. Default Values Page 646 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN State = active eth-cfm = OLT setting for default-eth-cfm MEPID= OLT setting for default-intracarrier-mepid ratelimit = disable member="" Confirmation Message Command completed successfully Example(s) Example 1: (OLT GigE WAN port, enable ratelimit) AXS2200> add vlan-member svid 400 olt sw-a-1 tx-td wandataupstream rx-td wandatadownstream ratelimit enable Command completed successfully Example 2: (OLT Link Aggregation Group) AXS2200> add vlan-member svid 500 olt lag-1 tx-td wandataupstream rx-td wandatadownstream state active Command completed successfully Example 3: (OLT Link Aggregation Group, Ethernet CFM parameters provided) AXS2200> add vlan-member svid 500 olt lag-1 tx-td wandataupstream rx-td wandatadownstream state active eth-cfm enable mepid 100 Command completed successfully Example 4: (OLT GigE WAN port on Ethernet Line card, enable ratelimit) AXS2200> add vlan-member svid 400 olt au-11-1 tx-td wandataupstream rx-td wandatadownstream ratelimit enable Command completed successfully Error Codes Bandwidth exceeds port capacity Invalid LAG address Invalid OLT Port Invalid svid Invalid traf-name invalid connection endpoint Invalid, port belongs to LAGroup VLAN not found OLT VLAN member already exists VLAN - SVID already in use and reserved for point to point connections only Link Aggregation Group has no GigE ports assigned as members Ethernet CFM not available for mcast vlan members MEPID can only be set when Ethernet CFM is enabled Invalid MEP ID Page 647 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN add vlan-member svid (svlanid) ont (ontportaddr) cvid (cvlanid) cpevid (cpevid) tx-td (traf-desc) rx-td (traf-desc) tcont (tcontid) state ({active | inactive}) pbit ({0-7}) eth-cfm (state) mepid (value) Description Adds the ONT CPE interface as a member of the VLAN. An S-VLAN can support a mix of both Voice and Data services. The command will be rejected if there is insufficient bandwidth available on the PON or ONT port to meet the CIR in the traffic descriptor for either transmit or receive direction. The command will be rejected if there is a conflict between the ONT forwarding mode and the VLAN forwarding mode. The system will automatically use default parameters for traffic descriptors based on the ONT port types if none are provided. T-CONT bandwidth settings on the PON are automatically adjusted based on the upstream traffic descriptors and the setting for the fixed percentage of the Guaranteed Bandwidth for the T-CONT. The ONT and OLT GPON card must support the multiple T-CONT feature to use T-CONTs 2-n. A listing of the default traffic descriptors for the type of ONT port and ONT family type is shown below. The settings for CIR and PIR in the traffic descriptors can be viewed via "show traffic table". Port ONT Family Type Type tx-td rx-td ------- ----------- --------------- ---------------voip ont1000g pkt_voip2 pkt_voip2 voip sf242x0 pkt_voip2 pkt_voip2 voip ont1500g pkt_voip8 pkt_voip8 voip ont6000gvt pkt_voip24 pkt_voip24 voip ont6000get pkt_voip24 pkt_voip24 pots ont1000g pkt_pots2 pkt_pots2 pots sf242x0 pkt_pots2 pkt_pots2 pots ont1500g pkt_pots8 pkt_pots8 pots ont6000gvt pkt_pots24 pkt_pots24 pots ont6000get pkt_pots24 pkt_pots24 enet (all types) pkt_fttpdata pkt_fttpdata moca (all types) pkt_fttpdata pkt_fttpdata vdsl2 ont6000gvt pkt_fttpdata pkt_fttpdata iptv (all types) pkt_iptvontdown pkt_iptvontup If traffic descriptors are being set, both transmit and receive directions must be provided. If only one of the two is provided, the command is rejected with an error message. An ONT port that is configured for transparent LAN service (TLS) can only support a single VLAN membership. If Ethernet CFM (IEEE 802.1ag) is enabled, then the following Maintenance Points are created: - Maintenance Endpoint (MEP) is created on the ONT CPE port at the Carrier MD Level for the VLAN member. - Maintenance Intermediate Point (MIP) is created on the OLT Switch card at the Carrier MD Level for the VLAN member. The assigned MEP ID must be unique for the VLAN (at the Carrier MD Page 648 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Level) across all other ONT ports that connect to the same VLAN. If the MEP ID is not provided in the message then it will be set to the default-carrier-mepid (if the first ONT connection to the VLAN) or to the next available MEP ID across all ONT MEPs assigned to the same VLAN. Pbit can only be set if CPEVID is present. When Pbit is not set, the default is "none", meaning the Pbit of packets for this vlan member should be set through other means (e.g., dscpmap, pbitremap, direct mapping, etc.) User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. ont ontportaddr Indicates the ONT port address. Valid values are: - slot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (pots, enet, moca, hcna, voip, vdsl2, ds1e1) - index (1-n) Optional Parameters: cpevid cpevid Indicates the value for the CPE VLAN ID {1-4094}. cvid cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. rx-td traf-desc Specifies the traffic descriptor for the VLAN ONT member. The receive direction is from the PON toward the CPE device (i.e. downstream) tx-td traf-desc Specifies the traffic descriptor for the VLAN ONT member. The transmit direction is from the CPE Device toward the PON (i.e. upstream) state {active | inactive} Sets the state to active or inactive. tcont tcontid Indicates the T-CONT ID in the range {1-n}. Page 649 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN state eth-cfm Sets the Ethernet CFM admin state. Valid values are: - enable - disable mepid value Sets the MEP ID used for Ethernet CFM. Valid values are: {1-8191}. pbit {0-7} Priority value assigned for packets of the vlan-member. Default Values cvid is required if the VLAN is a double tagged VLAN, and does not apply is the VLAN is single tagged. cpevid is provided when VLAN translation on the ONT port is desired. tx-td default is selected based upon the ONT port type rx-td default is selected based upon the ONT port type for iptv service, tx-td = pkt_iptvdown, rx-td = pkt_iptvup State = active tcont = 1 Eth-CFM = OLT setting for default-eth-cfm MEPID= OLT setting for default-carrier-mepid pbit = none member="" Confirmation Message Command completed successfully Example(s) Example 1: (Single tagged VLAN, ONT Ethernet interface, no optional attributes provided) AXS2200> add vlan-member svid 400 ont au-5-1-1-enet-1 Command completed successfully Example 2: (Double tagged VLAN, VoIP interface, some optional parameters provided) AXS2200> add vlan-member svid 16 ont au-5-1-1-voip cvid 2012 tcont 1 state active Command completed successfully Example 3: (Single tagged VLAN, Ethernet interface, VLAN translation) AXS2200> add vlan-member svid 400 ont au-5-1-1-enet-1 cpevid 101 state active Command completed successfully Example 4: (Double tagged VLAN, VoIP interface, ethernet CFM) AXS2200> add vlan-member svid 16 ont au-5-1-1-voip cvid 2012 state active eth-cfm enable mepid 100 Command completed successfully Example 5: Page 650 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN (Single tagged VLAN, E-H.248 interface, some optional parameters provided) AXS2200> add vlan-member svid 2001 ont au-5-1-1-pots tcont 1 state active Command completed successfully Example 6: (Double tagged VLAN, Ethernet interface, VLAN translation) AXS2200> add vlan-member svid 400 ont au-5-1-1-enet-1 cvid 2012 cpevid 101 state active Command completed successfully Page 651 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Error Codes VLAN - can not translate cpevid for a VLAN member on DS1/E1 port Only one VLAN allowed on a DS1/E1 port Multicast VLAN not allowed on a DS1/E1 port Multiple MCVLANs not supported on the specified ONT VLAN - Port cannot be a member of more than one multicast VLAN. ONT forwarding mode conflicts with VLAN forwarding mode Cannot add ONT members to In-Band Management VLAN Invalid P-bit VLAN - C-VID must be unique per PON port Invalid voice mode Invalid MEP ID VLAN - CVID not applicable for single-tagged VLANs VLAN - Port cannot be a member of both single and double tagged data VLANs VLAN - Port cannot be a member of more than one double-tagged VLAN VLAN - The values for all SVIDs and CVIDs on a GPON port must not overlap VLAN - No link between OLT and Router provisioned VLAN - Translation not supported on this ONT VLAN - exceeds maximum number of members per PON Invalid TCONT ID VLAN - Double tagged VLAN members do not support cpe-vid on this ONT VLAN - Port with both mcast and double-tag VLAN members do not support cpe-vid Invalid cvid CVID for the double-tagged VLAN already provisioned Invalid svid Invalid traf-name CVLAN ID required for double-tagged VLANs VLAN not found Bandwidth exceeds ONT capacity Bandwidth exceeds port capacity Incomplete command entered ONT Invalid port ONT VLAN member already exists PON bandwidth unavailable VLAN - SVID already in use and reserved for point to point connections only VLAN - Can't add cpevid translation to VoIP VLAN Invalid CPE VLAN ID TCONT - Another TCONT is already in use for this SVID on the ONT TCONT 1 must be used for this ONT VLAN - Cannot have more than one default tag (i.e. cpevid is 0) VLAN - Each vlan-member on the port must have a different SVID VLAN - Exceeds maximum VLAN members per ONT VLAN - Exceeds maximum vlan members per port VOIP is not configured or supported on ONT VLAN - TLS port can not be a member of multicast VLAN Only one connection to either the MoCA port or Enet port is allowed S-VID must be unique per PON port VLAN translation is not availlable on ONT Ports set for TLS VLAN - Each vlan-member on the port must have a different cpevid VLAN - TLS port can only be member of one VLAN Ethernet CFM not available for mcast vlan members MEPID already in use for this VLAN at this MD level Page 652 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN MEPID can only be set when Ethernet CFM is enabled Pbit can only be set when cpevid is present VLAN - SVID/CVID to CPEVID translations have to be unique on the ONT VLAN translations are not supported when an IP ACL is configured on the ONT Page 653 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN del vlan-member svid (svlanid) olt (oltwanaid) Description Deletes an OLT member of a VLAN. The OLT member must first be set to the inactive state before it can be deleted. If this is the only OLT member of a VLAN, then all ONT members must be deleted first before this operation will succeed. User Privilege Level: Superuser Required Parameters: olt oltwanaid Indicates the OLT interface: - slot-port for a gige interface - lag-index for a link aggregation group svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message This operation will permanently delete the VLAN member. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> del vlan-member svid 400 olt sw-a-1 This operation will permanently delete the VLAN member. Do you want to continue? y|n >y Command completed successfully Example 2: AXS2200> del vlan-member svid 400 olt au-11-1 This operation will permanently delete the VLAN member. Do you want to continue? y|n >y Command completed successfully Page 654 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Error Codes Invalid OLT Port VLAN not found VLAN member must first be set to inactive state VLAN ONT members must first be deleted VLAN - SVID already in use and reserved for point to point connections only VLAN member not found Cannot delete last member of In-Band Management VLAN Page 655 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN del vlan-member svid (svlanid) ont (ontportaddr) cvid (cvlanid) Description Deletes an ONT member of a VLAN. The ONT member must first be set to the inactive state before it can be deleted. The VLAN member cannot be deleted if there is a Carrier MEP, Carrier MIP, Customer MIP or AccessLink MEP configured for the service. If there is an AccessLink MEP configured for CPE VID 0 (which indicates the MEP is not associated with any particular VLAN ID), then at least one VLAN member must remain configured for service on the port, or the command will be denied. If the VLAN member is part of an In-Band management VLAN and there are no other members besides it, the comman will be rejected. In order to remove the member in that case, the In-Band Management Interface needas to be deleted first. User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. ont ontportaddr Indicates the ONT port address. Valid values are: - slot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (pots, enet, moca, hcna, voip, vdsl2, ds1e1) - index (1-n) Optional Parameters: cvid cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message This operation will permanently delete the VLAN member. Do you want to continue? y|n >y Command completed successfully Example(s) Page 656 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Example 1: AXS2200> del vlan-member svid 16 ont au-5-1-1-enet-1 This operation will permanently delete the VLAN member. Do you want to continue? y|n >y Command completed successfully Error Codes Invalid ONT connection endpoint VLAN member must first be set to inactive state VLAN not found VLAN - SVID already in use and reserved for point to point connections only AccessLink MEP must first be deleted Customer MIP must first be deleted Carrier MEP and/or MIP must first be deleted POTS channel(s) are configured Invalid cvid VLAN - CVID not applicable for single-tagged VLANs CVLAN ID required for double-tagged VLANs Page 657 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan name (vlanname) bind-ip-address (ip-address) mask (mask) Description Binds an IP address or IP address subnetwork to the VLAN. All upstream traffic that does not originate from an IP address in the bound range will be discarded by the OLT PON port. If a static IP address is desired, set the mask to 255.255.255.255. If a range of IP addresses is desired (such as for use with a DHCP server), set the mask for the subnetwork. To remove a bound IP address and mask from the VLAN, set both the IP address and mask to 0.0.0.0. The IP address must be a valid class A, B or C address (i.e. the first octet must be in the range 1-223) User Privilege Level: Superuser Required Parameters: name vlanname A user assigned name for the VLAN (up to 20 characters) bind-ip-address ip-address Indicates the IP address. mask mask Indicates the mask for the IP address. Default Values 0.0.0.0/0.0.0.0 (none) Confirmation Message This will change the IP address/mask binding for the VLAN. Do you want to continue? y | n >y Command complete successfully Example(s) Example 1: (set a VLAN binding) AXS2200> modify vlan name alpha bind-ip-address 172.68.1.1 mask 255.255.255.255 This will change the IP address/mask binding for the VLAN. Do you want to continue? y | n >y Command complete successfully Example 2: (remove a VLAN binding) AXS2200> modify vlan name alpha bind-ip-address 0.0.0.0 mask 0.0.0.0 This will change the IP address/mask binding for the VLAN. Page 658 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Do you want to continue? y | n >y Command complete successfully Error Codes Invalid IP Address Invalid Mask VLAN not found VLAN - maximum number of IP address bound VLANs exceeded Page 659 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan name (vlanname) bmc-rate (ratevlan) Description Defines a rate limit for broadcast, multicast and unknown unicast packets for the VLAN. The rate limit applies to all upstream and downstream packets for the VLAN. Unknown Unicast packets are also called DLF packets (Destination Lookup Failure). User Privilege Level: Superuser Required Parameters: name vlanname A user assigned name for the VLAN (up to 20 characters) bmc-rate ratevlan The rate limit for multicast, broadcast and unknown unicast packet forwarding, in packets per second. The range is {0, 1-14,880,952), where 0 indicates no limit is imposed. Default Values none Confirmation Message This affects the filtering rate. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200> modify vlan name alpha bmc-rate 750 This affects the filtering rate. Do you want to continue? y | n >y Command completed successfully. Error Codes VLAN not found Invalid bmc-rate VLAN - maximum number of VLANs exceeded for BMC-rate limiting Mutlicast vlans do not support bmc-rate Page 660 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan name (vlanname) description (text) Description Modifies the VLAN description User Privilege Level: Superuser Required Parameters: name vlanname A user assigned name for the VLAN (up to 20 characters) description text Descriptive text associated with this object. A string of up to 80 characters using alphanumeric characters plus dash "-" and underscore "_". Default Values none Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> modify vlan name alpha description BostonVLAN2035 Command completed successfully. Error Codes VLAN not found Invalid description Page 661 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan name (vlanname) dn-rate-limit ({enable | disable}) Description Specifies whether the administrative status of the downstream rate-limit function is enabled on a single-tag data VLAN. When enabled, it automatically applies to all GPON cards with members of such VLAN. User Privilege Level: Superuser Required Parameters: name vlanname Identifies the name of the VLAN. Can take up to 32 characters in length. dn-rate-limit {enable | disable} Administrative status of downstream rate-limit performed at GPON card. Default Values When the command is not issued, dn-rate-limit = disable Confirmation Message Example(s) Example 1: AXS2200> set vlan name vlan-100 dn-rate-limit enable Command completed successfully Error Codes dn-rate-limit can only be set for single-tag data vlans Page 662 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan name (vlanname) forwarding-mode (fwdmode) Description Changes the forwarding mode for a single tagged VLAN. The operation is not permitted if ONT VLAN members are already configured and the ONT operating forwarding mode does not match the requested VLAN forwarding mode. Up to 127 VLANs can override the chassis default forwarding mode. User Privilege Level: Superuser Required Parameters: name vlanname Identifies the name of the VLAN. Can take up to 32 characters in length. forwarding-mode fwdmode Specifies the type of VLAN forwarding mode. Valid choices are: - chassis-fwdmode - isolated (TR-101 access) - switched Default Values default = chassis-fwdmode Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> modify vlan name alpha forwarding-mode switched Command completed successfully Error Codes Forwarding mode can only be set on single tagged VLANs Maximum number of VLANs using non-default forwarding mode already configured AGPONC card is incompatible with feature - remove and clear slot first VLAN ONT members must first be deleted Page 663 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan svid (svlanid) bind-ip-address (ip-address) mask (mask) Description Binds an IP address or IP address subnetwork to the VLAN. All upstream traffic that does not originate from an IP address in the bound range will be discarded by the OLT PON port. If a static IP address is desired, set the mask to 255.255.255.255. If a range of IP addresses is desired (such as for use with a DHCP server), set the mask for the subnetwork. To remove a bound IP address and mask from the VLAN, set both the IP address and mask to 0.0.0.0. The IP address must be a valid class A, B or C address (i.e. the first octet must be in the range 1-223) User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. bind-ip-address ip-address Indicates the IP address. mask mask Indicates the mask for the IP address. Default Values 0.0.0.0/0.0.0.0 (none) Confirmation Message This will change the IP address/mask binding for the VLAN. Do you want to continue? y | n >y Command complete successfully Example(s) Example 1: (set a VLAN binding) AXS2200> modify vlan svid 500 bind-ip-address 172.68.1.1 mask 255.255.255.255 This will change the IP address/mask binding for the VLAN. Do you want to continue? y | n >y Command complete successfully Example 2: (remove a VLAN binding) AXS2200> modify vlan svid 500 bind-ip-address 0.0.0.0 mask 0.0.0.0 This will change the IP address/mask binding for the VLAN. Page 664 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Do you want to continue? y | n >y Command complete successfully Error Codes Invalid IP Address Invalid Mask Invalid svid VLAN - maximum number of IP address bound VLANs exceeded Page 665 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan svid (svlanid) bmc-rate (ratevlan) Description Defines a rate limit for broadcast, multicast and unknown unicast packets for the VLAN. The rate limit applies to all upstream and downstream packets for the VLAN. Unknown Unicast packets are also called DLF packets (Destination Lookup Failure). User Privilege Level: Superuser Required Parameters: bmc-rate ratevlan The rate limit for multicast, broadcast and unknown unicast packet forwarding, in packets per second. The range is {0, 1-14,880,952), where 0 indicates no limit is imposed. svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message This affects the filtering rate.. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200> modify vlan svid 500 bmc-rate 750 This affects the filtering rate. Do you want to continue? y | n >y Command completed successfully. Error Codes Invalid svid Invalid bmc-rate VLAN - maximum number of VLANs exceeded for BMC-rate limiting Mutlicast vlans do not support bmc-rate Page 666 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan svid (svlanid) description (text) Description Modifies the VLAN description User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. description text Descriptive text associated with this object. A string of up to 80 characters using alphanumeric characters plus dash "-" and underscore "_". Default Values none Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> modify vlan svid 500 description SouthWestIPTV Command completed successfully. Error Codes Invalid description Invalid svid Page 667 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan svid (svlanid) dn-rate-limit ({enable | disable}) Description Specifies whether the administrative status of the downstream rate-limit function is enabled on a single-tag data VLAN. When enabled, it automatically applies to all GPON cards with members of such VLAN. User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. dn-rate-limit {enable | disable} Administrative status of downstream rate-limit performed at GPON card. Default Values When the command is not issued, dn-rate-limit = disable Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> modify vlan svid 100 dn-rate-limit enable Command completed successfully Error Codes VLAN not found dn-rate-limit can only be set for single-tag data vlans Page 668 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan svid (svlanid) forwarding-mode (fwdmode) Description Changes the forwarding mode for a single tagged VLAN. The operation is not permitted if ONT VLAN members are already configured and the ONT operating forwarding mode does not match the requested VLAN forwarding mode. Up to 127 VLANs can override the chassis default forwarding mode. User Privilege Level: Superuser Required Parameters: forwarding-mode fwdmode Specifies the type of VLAN forwarding mode. Valid choices are: - chassis-fwdmode - isolated (TR-101 access) - switched svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values default = chassis-fwdmode Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> modify vlan svid 500 forwarding-mode switched Command completed successfully Error Codes Forwarding mode can only be set on single tagged VLANs VLAN ONT members must first be deleted Maximum number of VLANs using non-default forwarding mode already configured AGPONC card is incompatible with feature - remove and clear slot first Page 669 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan svid (svlanid) name (vlanname) Description Modifies the VLAN name. User Privilege Level: Superuser Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. name vlanname Identifies the name of the VLAN. Can take up to 32 characters in length. Default Values none Confirmation Message This will modify the attribute(s) of the VLAN. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> modify vlan svid 500 name metro-svlan-500 This will modify the attribute(s) of the VLAN. Do you want to continue? y | n >y Command completed successfully Error Codes Name already in use VLAN not found Invalid svid Page 670 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan-member svid (svlanid) olt (oltwanaid) tx-td (traf-name) rx-td (traf-name) state ({active | inactive}) eth-cfm (state) mepid (value) membername (name) Description Modifies settings for an OLT VLAN member. In the case where one or both Traffic Descriptors are changed, the system will make the change and bring the modified service up. In case of a failure, the system will revert to the previous set of traffic descriptors in order to avoid service outage. Ethernet CFM can be enabled or disabled for the OLT VLAN member. The MEP ID can only be set if Ethernet CFM is being enabled, otherwise the operation will be denied. - If enabled, the IntraCarrier MD level MEP will be created on the OLT WAN port. - If disabled, the IntraCarrier level MEP will be deleted. User Privilege Level: Superuser Required Parameters: svlanid svid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. olt oltwanaid Indicates the OLT interface: - slot-port for a gige interface - lag-index for a link aggregation group Optional Parameters: membername name Indicates the descriptive name assigned to the VLAN member. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. traf-name rx-td Specifies the traffic descriptor for the VLAN member. The receive direction is to the WAN (upstream) traf-name tx-td Specifies the traffic descriptor for the VLAN member. The transmit direction is from the WAN (i.e. downstream) {active | inactive} state Sets the state to active or inactive. state eth-cfm Sets the Ethernet CFM admin state. Valid values are: - enable - disable mepid value Sets the MEP ID used for Ethernet CFM. Page 671 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Valid values are: {1-8191}. Default Values Any settings that are not provided are not changed. Confirmation Message You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (modifies traffic descriptors only) AXS2200> modify vlan-member svid 400 olt sw-a-1 tx-td GoldTxTD rx-td GoldRxTD You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 2: (Inactivate VLAN member) AXS2200> modify vlan-member svid 400 olt lag-1 state inactive You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 3: (enable Ethernet CFM) AXS2200> modify vlan-member svid 16 olt lag-1 eth-cfm enable mepid 20 You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 4: (modifies traffic descriptors of OLT endpoint on Ethernet Card, enable ratelimit) AXS2200> modify vlan-member svid 400 olt au-11-1 tx-td GoldTxTD rx-td GoldRxTD ratelimit enable You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Page 672 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Error Codes Invalid name Invalid OLT Port VLAN member not found Invalid svid VLAN not found Invalid traf-name At least one attribute is required to be set Bandwidth exceeds port capacity VLAN - SVID already in use and reserved for point to point connections only Ethernet CFM not available for mcast vlan members MEPID can only be set when Ethernet CFM is enabled MEPID cannot be changed for existing MEP (disable then re-enable eth-cfm) Invalid MEP ID Page 673 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan-member svid (svlanid) ont (ontportaddr) cvid (cvlanid) tx-td (traf-desc) rx-td (traf-desc) state ({active | inactive}) eth-cfm (state) mepid (value) pbit ({0-7, none}) dn-rate-limit ({enable | disable}) Description Modifies settings for an ONT VLAN member. In the case where one or both Traffic Descriptors are changed, the system will make the change and bring the modified service up. In case of a failure, the system will revert to the previous set of traffic descriptors in order to avoid service outage. T-CONT bandwidth settings on the PON are automatically adjusted based on the upstream traffic descriptors and the setting for the fixed percentage of the Guaranteed Bandwidth for the T-CONT. Ethernet CFM can be enabled or disabled for the ONT VLAN member (excluded are Externalized H.248 POTS members. The MEP ID can only be set if Ethernet CFM is being enabled, otherwise the operation will be denied. - If enabled, the carrier MD level MEP will be created on the ONT port and the MIP created on the OLT. - If disabled, the Carrier level MEP and MIP will be deleted. Pbit can only be set if CPEVID is provisioned for the VLAN member. When "none" is specified, it wipes out the previous setting. dn-rate-limit specifies whether the administrative status of the downstream rate-limit function is enabled on a double-tag VLAN member. It is not configurable for a single-tag or mcast VLAN member. User Privilege Level: Superuser Required Parameters: ont ontportaddr Indicates the ONT port address. Valid values are: - slot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (pots, enet, moca, voip, vdsl2) - index (1-n) svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Optional Parameters: tx-td traf-desc Specifies the traffic descriptor for the VLAN ONT member. Page 674 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN The transmit direction is from the CPE Device toward the PON (i.e. upstream) traf-desc rx-td Specifies the traffic descriptor for the VLAN ONT member. The receive direction is from the PON toward the CPE device (i.e. downstream) {active | inactive} state Sets the state to active or inactive. state eth-cfm Sets the Ethernet CFM admin state. Valid values are: - enable - disable mepid value Sets the MEP ID used for Ethernet CFM. Valid values are: {1-8191}. cvid cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. dn-rate-limit {enable | disable} Administrative status of downstream rate-limit performed at GPON card. pbit {0-7, none} Priority value assigned for packets of the vlan-member. When "none" is specified, it wipes out the previous setting. Default Values Any settings that are not provided are not changed. Confirmation Message You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (modifies traffic descriptors only) AXS2200> modify vlan-member svid 400 ont au-5-1-1-enet-1 tx-td GoldTxTD rx-td GoldRxTD You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 2: (Inactivate VLAN member) AXS2200> modify vlan-member svid 400 ont au-5-1-1-moca-1 state inactive You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Page 675 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Example 3: (enable Ethernet CFM) AXS2200> modify vlan-member svid 16 ont au-5-1-1-voip eth-cfm enable mepid 20 You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 4: (Inactivate POTS VLAN member) AXS2200> modify vlan-member svid 2001 ont au-5-1-1-pots state inactive You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid P-bit Invalid svid VLAN not found Invalid traf-name PON bandwidth unavailable Bandwidth exceeds ONT capacity At least one attribute is required to be set Bandwidth exceeds port capacity VLAN - Each vlan-member on the port must have a different SVID Ethernet CFM not available for mcast vlan members MEPID can only be set when Ethernet CFM is enabled MEPID cannot be changed for existing MEP (disable then re-enable eth-cfm) ONT (from) does not exist ONT Invalid port Cannot have both dhcp and non-default acl on vlan-member VLAN - Acceptframetypes must be all if TLS is set to no VLAN member not found Invalid cvid VLAN - CVID not applicable for single-tagged VLANs CVLAN ID required for double-tagged VLANs dn-rate-limit can only be set for double-tag vlan members Pbit can only be set when cpevid is present Page 676 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan-member svid (svlanid) ont (ontportaddr) membername (name) Description Modifies settings for an ONT VLAN member. In the case where one or both Traffic Descriptors are changed, the system will make the change and bring the modified service up. In case of a failure, the system will revert to the previous set of traffic descriptors in order to avoid service outage. T-CONT bandwidth settings on the PON are automatically adjusted based on the upstream traffic descriptors and the setting for the fixed percentage of the Guaranteed Bandwidth for the T-CONT. Ethernet CFM can be enabled or disabled for the ONT VLAN member (excluded are Externalized H.248 POTS members. The MEP ID can only be set if Ethernet CFM is being enabled, otherwise the operation will be denied. - If enabled, the carrier MD level MEP will be created on the ONT port and the MIP created on the OLT. - If disabled, the Carrier level MEP and MIP will be deleted. Pbit can only be set if CPEVID is provisioned for the VLAN member. When "none" is specified, it wipes out the previous setting. dn-rate-limit specifies whether the administrative status of the downstream rate-limit function is enabled on a double-tag VLAN member. It is not configurable for a single-tag or mcast VLAN member. User Privilege Level: Superuser Required Parameters: membername name Indicates the descriptive name assigned to the VLAN member. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. ont ontportaddr Indicates the ONT port address. Valid values are: - slot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - porttype (pots, enet, moca, voip, vdsl2) - index (1-n) svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Page 677 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Default Values Any settings that are not provided are not changed. Confirmation Message You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (modifies traffic descriptors only) AXS2200> modify vlan-member svid 400 ont au-5-1-1-enet-1 tx-td GoldTxTD rx-td GoldRxTD You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 2: (Inactivate VLAN member) AXS2200> modify vlan-member svid 400 ont au-5-1-1-moca-1 state inactive You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 3: (enable Ethernet CFM) AXS2200> modify vlan-member svid 16 ont au-5-1-1-voip eth-cfm enable mepid 20 You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example 4: (Inactivate POTS VLAN member) AXS2200> modify vlan-member svid 2001 ont au-5-1-1-pots state inactive You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Page 678 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Error Codes Invalid name CVLAN ID required for double-tagged VLANs Invalid P-bit Invalid svid VLAN not found Invalid traf-name PON bandwidth unavailable Bandwidth exceeds ONT capacity At least one attribute is required to be set Bandwidth exceeds port capacity VLAN - Each vlan-member on the port must have a different SVID Ethernet CFM not available for mcast vlan members MEPID can only be set when Ethernet CFM is enabled MEPID cannot be changed for existing MEP (disable then re-enable eth-cfm) ONT (from) does not exist ONT Invalid port Cannot have both dhcp and non-default acl on vlan-member VLAN - Acceptframetypes must be all if TLS is set to no VLAN member not found Invalid cvid VLAN - CVID not applicable for single-tagged VLANs dn-rate-limit can only be set for double-tag vlan members Pbit can only be set when cpevid is present Page 679 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN modify vlan-member svid (svlanid) ont (ontportaddr) tcont (tcontid) cvid (cvlanid) Description Modifies the T-CONT assignment for an ONT VLAN member. The ONT and OLT GPON card must support the multiple T-CONT feature to use T-CONTs 2-n. If there are multiple single-tagged or multicast VLAN members for the SVID on the ONT, then all members on the ONT for the SVID will be changed to use the new T-CONT. This is necessary since all members for the same single tagged or multicast SVID for an ONT must be assigned to the same T-CONT. T-CONT bandwidth settings on the PON are automatically adjusted based on the upstream traffic descriptors and the setting for the fixed percentage of the Guaranteed Bandwidth for the T-CONT. All VLAN members for the SVID on the ONT must first have the admin state set to inactive for this command to succeed. User Privilege Level: Superuser Required Parameters: tcont tcontid Indicates the T-CONT ID in the range {1-n}. ont ontportaddr Indicates the ONT port address. Valid values are: - slot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - porttype (enet, moca, hcna, voip, vdsl2) - index (1-n) Note: The port type "pots" is not valid. svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Optional Parameters: cvid cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. Default Values none Page 680 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Confirmation Message You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> modify vlan-member svid 400 ont au-5-1-1-enet-1 tcont 2 You have elected to modify a VLAN member which may temporarily affect service. Do you want to continue? y | n >y Command completed successfully Error Codes ONT Invalid port VLAN member not found VLAN not found Invalid TCONT ID TCONT 1 must be used for this ONT VLAN - SVID already in use and reserved for point to point connections only TCONT-All VLAN members on this ONT for this SVID must first be set to inactive PON bandwidth unavailable Invalid cvid VLAN - CVID not applicable for single-tagged VLANs CVLAN ID required for double-tagged VLANs Page 681 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN show vlan-member olt (oltwanaid) svid (svlanid) Description Describes the settings for the OLT WAN member of a VLAN. Reported attributes include: S-VID: VLAN Name VLAN Type: single-tag, double-tag, mcast Member Port AID Member Name Member Admin State: Active, Inactive Member Oper State: Active, Inactive, Fault, Unknown Downstream Rate Limit State: Enable, Disable US Traffic Descriptor: the name of the upstream traffic descriptor DS Traffic Descriptor: the name of the downstream traffic descriptor Traffic descriptor details: traffic descriptor name, PIR and CIR Eth-CFM: enable, disable (Ethernet CFM) IntraCarrier MEP: created, none If the IntraCarrier MEP is created, the additional information is shown: - MD Level: {0-7} - MEP ID: {1-8191} - Direction: up, down User Privilege Level: Operator Required Parameters: olt oltwanaid Indicates the OLT interface: - slot-port for a gige interface - lag-index for a link aggregation group svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (single-tagged VLAN) AXS2200> show vlan-member olt sw-a-1 svid 400 =============================================================================== VLAN OLT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 400 VLAN Name: vlan-400 VLAN type: single-tag Member Port AID (Port Type): sw-a-1 Member Name: Portman Admin State: Active Page 682 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Oper State: Active Downstream Rate Limit: Enable US Traffic Descriptor: gold_wan_us DS Traffic Descriptor: gold_wan_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_wan_us 100.0 gold_wan_ds 300.0 Eth-CFM: disable IntraCarrier MEP: none CIR (Mb/s) ---------25.0 75.0 =============================================================================== Command completed successfully Example 2: (single-tagged VLAN) AXS2200> show vlan-member olt lag-1 svid 400 =============================================================================== VLAN OLT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 400 VLAN Name: vlan-400 VLAN type: single-tag Member Port AID (Port Type): lag-1 Member Name: gard Admin State: Active Oper State: Active Downstream Rate Limit: Enable US Traffic Descriptor: gold_wan_us DS Traffic Descriptor: gold_wan_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_wan_us 100.0 gold_wan_ds 300.0 Eth-CFM: enable Intra-Carrier MEP: created MD Level: 2 MEP ID: 2 Direction: down CIR (Mb/s) ---------25.0 75.0 =============================================================================== Command completed successfully Example 3: (double-tagged VLAN) AXS2200> show vlan-member olt lag-1 svid 16 =============================================================================== VLAN OLT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 16 VLAN Name: vlan-16 VLAN type: double-tag Member Port AID (Port Type): lag-1 Member Name: Uplink Merrimack South Admin State: Active Oper State: Active Downstream Rate Limit: Enable US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) Page 683 CIR (Mb/s) AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN -------------------gold_cpe_us gold_cpe_ds Eth-CFM: enable Intra-Carrier MEP: created MD Level: 2 MEP ID: 2 Direction: down ---------5.0 15.0 ---------1.0 1.0 =============================================================================== Command completed successfully Example 4: AXS2200> show vlan-member olt lag-1 svid 311 =============================================================================== VLAN OLT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 311 VLAN Name: IPTV_MCVLAN_USEast VLAN type: mcast Member Port AID (Port Type): lag-1 Member Name: Nelson link Admin State: Active Oper State: Active Downstream Rate Limit: Enable US Traffic Descriptor: iptv_us DS Traffic Descriptor: iptv ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------iptv-us 5.0 iptv-ds 500.0 CIR (Mb/s) ---------2.5 500.0 =============================================================================== Command completed successfully Example 5: (mcast VLAN) AXS2200> show vlan-member olt sw-a-1 svid 306 =============================================================================== VLAN OLT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 400 VLAN Name: vlan-400 VLAN type: mcast Member Port AID (Port Type): sw-a-1 Member Name: Video Uplink Boston Admin State: Active Oper State: Active Downstream Rate Limit: Enable US Traffic Descriptor: iptv_wan_us DS Traffic Descriptor: iptv_wan_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------iptv_wan_us 20.0 iptv_wan_ds 500.0 CIR (Mb/s) ---------20.0 500.0 =============================================================================== Command completed successfully Example 6: (single-tagged VLAN, port on Ethernet card) AXS2200> show vlan-member olt au-11-1 svid 400 Page 684 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN =============================================================================== VLAN OLT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 400 VLAN Name: vlan-400 VLAN type: single-tag Member Port AID (Port Type): au-11-1 Member Name: Uplink to HAL Admin State: Active Oper State: Active Downstream Rate Limit: Enable US Traffic Descriptor: gold_wan_us DS Traffic Descriptor: gold_wan_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) CIR (Mb/s) -------------------- ---------- ---------gold_wan_us 100.0 25.0 gold_wan_ds 300.0 75.0 Eth-CFM: disable IntraCarrier MEP: none =============================================================================== Command completed successfully Error Codes Invalid svid Invalid OLT Port VLAN not found Page 685 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN show vlan-member ont (ontportaddr) svid (svlanid) cvid (cvlanid) Description Describes the settings for the ONT members. If multiple VLAN members are configured on the ONT port, and neither the S-VID or C-VID is provided, then all of them are displayed, one after the other. Reported attributes include: S-VID: VLAN Name VLAN Type: single-tag, double-tag, mcast Member ONT Port AID Member Name Member C-VID: for members of double-tagged VLANs only, otherwise "-" is shown. CPE-VID: The VLAN ID from the CPE device received by the ONT, otherwise "-" is shown. Pbit: 0-7, or "-" Port TLS: yes, no Member Admin State: Active, Inactive Member Oper State: Active, Inactive, Fault, Unknown ONT TCONT ID: {1-n} US Traffic Descriptor: the name of the upstream traffic descriptor DS Traffic Descriptor: the name of the downstream traffic descriptor Traffic descriptor details: traffic descriptor name, PIR and CIR Downstream rate limit: enable/disable (for double-tag VLAN member only) Eth-CFM: enable, disable (Ethernet CFM) Carrier MEP: created, none If the Carrier MEP is created, the additional information is shown: - MD Level: {0-7} - MEP ID: {1-8191} - Direction: up, down Carrier MIP: created, none If the Carrier MIP is created, the additional information is shown: - MD Level: {0-7} For a VLAN member on Ethernet port, the following attributes are shown: -MAC ACL name: -IP ACL name: For a VLAN member on an HCNA port, the following attributes are shown: -MAC ACL name: -IP ACL name: For a Multicast VLAN member, the following attribute is displayed: - IPTV profile: profile name User Privilege Level: Operator Required Parameters: ont ontportaddr Indicates the ONT port address. Valid values are: - slot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: Page 686 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA - Provisioning - VLAN oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} port (the index of the PON port on the OLT GPON card) channel (the ONT channel on the PON) porttype (pots, enet, moca, hcna, voip, vdsl2, ds1e1) index (1-n) Optional Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. cvid cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (single-tagged VLAN, only one ONT member for the ont port) AXS2200> show vlan-member ont au-5-1-1-enet-1 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 400 VLAN Name: vlan-400 VLAN type: single-tag Member Port AID: au-5-1-1-enet-1 Member Name: Soderstrom C-VID: not applicable CPE-VID: 100 Pbit: 3 Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Eth-CFM: disable Carrier MEP: none Carrier MIP: none MAC ACL name: alice IP ACL name: qbdef =============================================================================== Command completed successfully Page 687 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Example 2: (single-tagged VLAN. SVID not specified - only one connection for the VoIP port) AXS2200> show vlan-member ont au-5-1-1-voip =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 200 VLAN Name: vlan-200 VLAN type: single-tag Member Port AID: au-5-1-1-voip Member Name: Voice Member Tergate C-VID: not applicable CPE-VID: 100 Pbit: 3 Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: pkt_voip2 DS Traffic Descriptor: pkt_voip2 Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------pkt_voip2 2.0 CIR (Mb/s) ---------0.3 Eth-CFM: enable Carrier MEP: created MD Level: 3 MEP ID: 2 Direction: up Carrier MIP: created MD Level: 3 =============================================================================== Command completed successfully Example 3: (double-tagged VLAN. Only one VLAN member for the ONT port: svid and cvid not specified.) AXS2200> show vlan-member ont au-6-1-1-enet-1 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 16 VLAN Name: vlan-16-ctag VLAN type: double-tag Member Port AID: au-6-1-1-enet-1 Member Name: C-VID: 30 CPE-VID: Pbit: Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 Page 688 CIR (Mb/s) ---------1.0 1.0 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Downstream rate-limit: enable Eth-CFM: disable Carrier MEP: created MD Level: 3 MEP ID: 2 Direction: up Carrier MIP: created MD Level: 3 MAC ACL name: alice IP ACL name: qbdef DHCP-bind: enable =============================================================================== Command completed successfully Example 4: (double-tagged VLAN. The svid and cvid are specified.) AXS2200> show vlan-member ont au-6-1-1-enet-1 svid 16 cvid 30 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 16 VLAN Name: vlan-16-ctag VLAN type: double-tag Member Port AID: au-6-1-1-enet-1 Member Name: Strunz C-VID: 30 CPE-VID: Pbit: Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Downstream rate-limit: enable Eth-CFM: disable Carrier MEP: none Carrier MIP: none MAC ACL name: alice IP ACL name: qbdef =============================================================================== Command completed successfully Example 5: (ONT port supports multiple single-tagged VLAN members, no svid provided upon input) AXS2200> show vlan-member ont au-5-1-1-enet-1 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 400 Page 689 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN VLAN Name: vlan-400 VLAN type: single-tag Member Port AID: au-5-1-1-enet-1 Member Name: C-VID: not applicable CPE-VID: 100 Pbit: Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Eth-CFM: disable Carrier MEP: none Carrier MIP: none MAC ACL name: qbdef IP ACL Name: qbdef -------------------S-VID: 1100 VLAN Name: vlan-1100 VLAN type: single-tag Member Port AID: au-5-1-1-enet-1 Member Name: Robben C-VID: not applicable CPE-VID: 101 Pbit: Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 2 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Eth-CFM: disable Carrier MEP: none Carrier MIP: none MAC ACL name: alice IP ACL name: qbdef =============================================================================== Command completed successfully Example 6: (ONT port supports multiple single-tagged VLAN members, svid is provided upon input) AXS2200> show vlan-member ont au-5-1-1-enet-1 svid 400 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 400 VLAN Name: VLAN type: Page 690 vlan-400 single-tag AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Member Port AID: au-5-1-1-enet-1 Member Name: Messi C-VID: not applicable CPE-VID: 100 Pbit: 3 Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Eth-CFM: disable Carrier MEP: none Carrier MIP: none MAC ACL name: alice IP ACL name: qbdef =============================================================================== Command completed successfully Example 7: (only one mcast vlan member for the ont port) AXS2200> show vlan-member ont au-5-1-1-enet-1 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 306 VLAN Name: mcvlan-306 VLAN type: mcast Member Port AID: au-5-1-1-enet-1 Member Name: Garvinski C-VID: not applicable CPE-VID: 100 Pbit: 3 Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: iptv_cpe_us DS Traffic Descriptor: iptv_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------iptv_cpe_us 0.1 iptv_cpe_ds 5.0 CIR (Mb/s) ---------0.1 5.0 Eth-CFM: disable Carrier MEP: none Carrier MIP: none MAC ACL name: alice IP ACL name: qbdef IPTV Profile: qbdef =============================================================================== Command completed successfully Example 8: (double-tagged VLAN. Only one VLAN member for the ONT port: svid and cvid not Page 691 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN specified.) AXS2200> show vlan-member ont au-6-1-1-hcna-1 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 16 VLAN Name: vlan-16-ctag VLAN type: double-tag Member Port AID: au-6-1-1-hcna-1 Member Name: 1420 member no. 45 C-VID: 30 CPE-VID: Pbit: Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Downstream rate-limit: disable Eth-CFM: disable Carrier MEP: none Carrier MIP: none MAC ACL name: alice IP ACL name: qbdef =============================================================================== Command completed successfully Example 9: (POTS VLAN member for Externalized H.248 service) AXS2200> show vlan-member ont au-5-1-1-pots =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 200 VLAN Name: vlan-200 VLAN type: single-tag Member Port AID: au-5-1-1-pots Member Name: Phone member 1812 C-VID: not applicable CPE-VID: 100 Pbit: 3 Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: pkt_pots2 DS Traffic Descriptor: pkt_pots2 Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------pkt_pots2 2.0 CIR (Mb/s) ---------0.3 Eth-CFM: enable Carrier MEP: created MD Level: 3 MEP ID: 2 Direction: up Page 692 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Carrier MIP: created MD Level: 3 =============================================================================== Command completed successfully Example 10: (double-tagged VLAN. Two VLAN members for the ONT port: svid and cvid not specified.) AXS2200> show vlan-member ont au-6-1-1-enet-1 =============================================================================== VLAN ONT MEMBER REPORT DATE: 10/07/2008 TIME: 15:36:55 =============================================================================== S-VID: 16 VLAN Name: vlan-16-ctag VLAN type: double-tag Member Port AID: au-6-1-1-enet-1 Member Name: Weber Type B C-VID: 30 CPE-VID: 100 Pbit: 3 Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Downstream rate-limit: disable Eth-CFM: disable Carrier MEP: created MD Level: 3 MEP ID: 2 Direction: up Carrier MIP: created MD Level: 3 MAC ACL name: alice IP ACL name: qbdef DHCP-bind: enable S-VID: 1000 VLAN Name: vlan-1000-ctag VLAN type: double-tag Member Port AID: au-6-1-1-enet-1 C-VID: 40 CPE-VID: 200 Pbit: 3 Admin State: Active Oper State: Active Port TLS: no ONT TCONT ID: 1 US Traffic Descriptor: gold_cpe_us DS Traffic Descriptor: gold_cpe_ds Traffic Descriptor Details Traf-Name PIR (Mb/s) -------------------- ---------gold_cpe_us 5.0 gold_cpe_ds 15.0 CIR (Mb/s) ---------1.0 1.0 Downstream rate-limit: disable Eth-CFM: disable Carrier MEP: created Page 693 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN MD Level: 3 MEP ID: 2 Direction: up Carrier MIP: created MD Level: 3 MAC ACL name: alice IP ACL name: qbdef DHCP-bind: enable =============================================================================== Command completed successfully Error Codes Invalid cvid Invalid svid VLAN not found Port is not a VLAN member ONT Invalid port VLAN - CVID not applicable for single-tagged VLANs Page 694 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN show vlans olt ({all | slot | slot-port | lagroup}) type ({all | single-tag | double-tag | mcast}) Description Displays all configured S-VLANS. For each S-VLAN, the report displays: S-VID: SVLAN-ID Type: single-tagged, double-tagged, mcast Name: user configured VLAN name AdminState: active, inactive Fowarding Mode (Fwd): The provisioned VLAN forwarding mode: switched (sw), isolated (iso), chassis-fwdmode (def), or n/a if double-tag or mcast. If a VLAN has no OLT member, then a "-" is displayed Note that IP Voice Gateway slots and GPON slots are not valid for this report. User Privilege Level: Operator Optional Parameters: olt {all | slot | slot-port | lagroup} Identifies the OLT WAN interface: -all: all OLT GbE/10GbE WAN ports and Link Aggregation Groups - slot: a specific GbE/10GbE WAN card example: sw-a - slot-port: a specific GbE/10GbE WAN port example: sw-a-2 - lagroup: a specific link aggregation group lag-{1-128} example: lag-1 type mcast} {all | single-tag | double-tag | Default Values if not provided, olt=all by default if not provided, type = all by default Confirmation Message Command completed successfully Example(s) Example 1: (default all VLANs on the OLT WAN linecards, default all types) AXS2200> show vlans =============================================================================== SUMMARY OLT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== OLT Port -------sw-a-2 sw-a-5 sw-a-6 sw-b-2 Page 695 S-VID ----20 401 402 500 20 Type ---------double-tag single-tag mcast single-tag double-tag Name -------------------------------vlan20-a vlan401 vlan402 vlan500-a vlan20-b AXS2200 OLT AdminState ---------active active active active Fwd --n/a def n/a def sw R7.4 CLI Reference Guide MOTOROLA sw-b-3 sw-b-4 lag-1 lag-1 lag-1 lag-1 lag-2 lag-2 lag-2 lag-2 Provisioning - VLAN 777 500 1500 1501 1502 1503 1500 1501 1502 1503 single-tag single-tag single-tag single-tag single-tag single-tag single-tag single-tag single-tag single-tag vlan777 vlan500-b vlan-1500 vlan-1501 vlan-1502 vlan-1503 vlan-1500-b vlan-1501-b vlan-1502-b vlan-1503-b active active active active active active active active active active iso def def def def def def def def def =============================================================================== Command completed successfully Example 2: (all VLANs on an OLT WAN linecard, default all types) AXS2200> show vlans olt sw-a =============================================================================== SUMMARY OLT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== OLT Port -------sw-a-2 sw-a-3 sw-a-5 sw-a-6 S-VID ----20 401 402 500 Type ---------double-tag single-tag mcast single-tag Name -------------------------------vlan20-a vlan401 vlan402 vlan500-a AdminState ---------active inactive active active Fwd --n/a def n/a def =============================================================================== Command completed successfully Example 3: (all VLANs on an OLT WAN port, default all types) AXS2200> show vlans olt sw-a-2 =============================================================================== SUMMARY OLT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== OLT Port -------sw-a-2 S-VID ----20 Type ---------double-tag Name -------------------------------vlan20-a AdminState ---------active Fwd --n/a =============================================================================== Command completed successfully Example 4: (all VLANs on LAG group, single-tagged VLAN types) AXS2200> show vlans olt lag-1 type single-tag =============================================================================== SUMMARY OLT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== OLT Port -------lag-1 lag-1 lag-1 lag-1 S-VID ----1500 1501 1502 1503 Type ---------single-tag single-tag single-tag single-tag Name -------------------------------vlan-1500 vlan-1501 vlan-1502 vlan-1503 AdminState ---------active active active active Fwd --def def def sw =============================================================================== Command completed successfully Page 696 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN Error Codes Invalid LAG address Invalid port Invalid slot VLAN not found Page 697 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VLAN show vlans ont ({ all | ponslot | ponport | ontaddress } ) type ({all | single-tag | double-tag | mcast}) Description Displays all configured ONT port VLAN members. For each VLAN member, the following attributes are reported: - ONT Port AID - S-VID: SVLAN-ID - C-VID: CVLAN-ID - Type: single-tag, double-tag, mcast - Port TLS: yes, no - AdminState: inactive, active User Privilege Level: Operator Required Parameters: ont { all | ponslot | ponport | ontaddress } Specifies the filter criteria for the ONT VLAN members: - all: all ONT VLAN members across all GPON cards in the OLT. - ponslot: The OLT slot that contains a GPON card example: au-5 - ponport: The OLT GPON port. example: au-5-1 - ontaddress: The ONT address example: au-5-1-1 Optional Parameters: type mcast} {all | single-tag | double-tag | Default Values if not provided, type = all Confirmation Message Command completed successfully Example(s) Example 1: (all ONTs, default VLAN types used) AXS2200> show vlans ont all =============================================================================== SUMMARY ONT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== ONT Port AID ------------------au-5-1-16-enet-1 au-5-1-16-enet-1 au-5-1-16-voip au-5-1-22-enet-1 au-5-1-22-enet-1 au-5-1-22-voip au-5-2-20-enet-1 Page 698 S-VID ----401 306 500 401 306 500 401 C-VID ----- CPE-VID ------100 500 100 500 100 Type ---------single-tag mcast single-tag single-tag mcast single-tag single-tag Port TLS -------no no no no no AXS2200 OLT AdminState ---------active inactive active active active active active R7.4 CLI Reference Guide MOTOROLA au-5-3-1-enet-1 au-5-4-32-voip au-12-1-5-moca-1 au-12-1-6-moca-1 au-12-1-15-moca-1 au-12-1-25-moca-1 au-12-3-11-enet-1 au-13-2-2-voip Provisioning - VLAN 306 500 20 20 20 20 306 500 50 51 52 53 - 500 500 - mcast single-tag double-tag double-tag double-tag double-tag mcast single-tag no no no no no no - active active active active active active active active =============================================================================== Command completed successfully Example 2: (all ONTs for a PON card slot, default VLAN types used) AXS2200> show vlans ont au-5 =============================================================================== SUMMARY ONT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== ONT Port AID ------------------au-5-1-16-enet-1 au-5-1-16-enet-1 au-5-1-16-voip au-5-1-22-enet-1 au-5-1-22-enet-1 au-5-1-22-voip au-5-2-20-enet-1 au-5-3-1-enet-1 au-5-4-32-voip S-VID ----401 306 500 401 306 500 401 306 500 C-VID ----- CPE-VID ------100 500 100 500 100 500 - Type ---------single-tag mcast single-tag single-tag mcast single-tag single-tag mcast single-tag Port TLS -------no no no no no no - AdminState ---------active inactive active active active active active active active =============================================================================== Command completed successfully Example 3: (all ONTs for a PON port, default VLAN types used) AXS2200> show vlans ont au-5-1 =============================================================================== SUMMARY ONT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== ONT Port AID ------------------au-5-1-16-enet-1 au-5-1-16-enet-1 au-5-1-16-voip au-5-1-22-enet-1 au-5-1-22-enet-1 au-5-1-22-voip S-VID ----401 306 500 401 306 500 C-VID ----- CPE-VID ------100 500 100 500 - Type ---------single-tag mcast single-tag single-tag mcast single-tag Port TLS -------no no no no - AdminState ---------active inactive active active active active =============================================================================== Command completed successfully Example 4: (specific ONT AID provided, default all VLAN types used) AXS2200> show vlans ont au-5-1-16 =============================================================================== SUMMARY ONT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== ONT Port AID ------------------- Page 699 S-VID ----- C-VID ----- CPE-VID ------- Type ---------- Port TLS -------- AXS2200 OLT AdminState ---------- R7.4 CLI Reference Guide MOTOROLA au-5-1-16-enet-1 au-5-1-16-enet-1 au-5-1-16-voip Provisioning - VLAN 401 306 500 - 100 500 - single-tag mcast single-tag no no - active inactive active =============================================================================== Command completed successfully Example 5: (specific ONT AID provided, default all VLAN types used, with eH248) AXS2200> show vlans ont au-5-1-16 =============================================================================== SUMMARY ONT VLAN REPORT DATE: 10/07/2007 TIME: 15:36:34 =============================================================================== ONT Port AID ------------------au-5-1-16-enet-1 au-5-1-16-enet-1 au-5-1-16-pots S-VID ----401 306 2001 C-VID ----- CPE-VID ------100 500 - Type ---------single-tag mcast single-tag Port TLS -------no no - AdminState ---------active inactive active =============================================================================== Command completed successfully Error Codes VLAN not found Invalid PON port Invalid slot Invalid ONT Page 700 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 701 Provisioning - VLAN AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Provisioning - VoIP set ont id (ontaddress) sip-resubscribe Description This command allows the user to force an ONT SIP User Agent to renew its subscriptions without waiting for the refresh interval to complete or the ONT being reset. The command will be rejected if the target ONT is not in VoIP mode or if the VoIP connection or VLAN member is in the inactive state. Note: The actual execution of the subscription renewal is always delayed by 80 seconds in order to allow the User Agent to clear existing data and state information. A repeated execution of this command within the 80 second window of a previously launched command will result in a timer restart and therefore delay of the scubscription renewal by 80 seconds again. User Privilege Level: Superuser Required Parameters: ontaddress id Identifies the ONT by address (e.g. au-3-4-16). sip-resubscribe Default Values Confirmation Message Example(s) Example 1: AXS2200> set ont id au-5-1-3 sip-resubscribe Command completed successfully Error Codes Invalid connection state for request Invalid ONT VOIP is not configured or supported on ONT ONT does not exist Page 702 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP set ont id (ontaddress) voipconfig dhcp-ipaddr-mode Description This command allows the user to set an ONT to automatic (DHCP) address assignment for the voice service on the ONT (valid for both for E-H.248 and SIP). User Privilege Level: Superuser Required Parameters: dhcp-ipaddr-mode ontaddress id Identifies the ONT by address (e.g. au-3-4-16). voipconfig Default Values Confirmation Message This will affect services on the ONT. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (DHCP, ONT in SIP or E-H.248 voice mode) AXS2200> set ont id au-5-1-3 voipconfig This will affect services on the ONT. Do you want to continue? y | n >y dhcp-addr-mode Command completed successfully Example 2: (DHCP, ONT in tdm voice mode) AXS2200> set ont id au-5-1-3 voipconfig This will affect services on the ONT. Do you want to continue? y | n >y dhcp-addr-mode Invalid voice mode Page 703 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Error Codes ONT does not exist Invalid ONT Invalid voice mode Page 704 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP set ont id (ontaddress) voipconfig ont-sipconfig (name) sipuser (usr) realm (domain) sippaswd (pwd) Description This command assigns the ont-sipconfig profile (bootstrap data) to the specific ONT at ontaddress. It will be downloaded via OMCI to the ONT. The information stored in this ont-sipconfig profile will be used for the IP-based configuration server model. The configuration credentials (sipusr, realm, sippaswd) are used for authentication and the combination of the three should be made unique for each ONT in order to avoid conflicts across voice provisioning. User Privilege Level: Superuser Required Parameters: ontaddress id Identifies the ONT by address (e.g. au-3-4-16). voipconfig ont-sipconfig name IP-based configuration profile containing the bootstrap data. Optional Parameters: realm domain The realm is a protection domain or security administration domain. Since it is used in the MD5 digest format for authentication, the realm string undergoes case sensitive comparison when the UA is challenged by the proxy server with a server provided realm string. The realm may contain a domain name or host name per rfc 3261. The syntax for a host name and a domain name are the same. The guidelines for defining a domain name are provided below: A domain name is made up of labels separated by dots. The maximum length of a domain name is 255 chars. Labels are alphanumeric strings with hyphen; they start with a letter, cannot end with a hyphen, and are case insensitive. A label is {1-63} characters long. Some newer DNS servers allow a label to start with a digit, contain underscores and the @ symbol, and have a longer minimum length. FQDNs are sometimes terminated by a dot. Page 705 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Please note that the AXS2200 will check only that - the max length of a domain name is no more than 255 chars (max of 255 via the NBI/XML and 232 via the CLI) - the valid character set includes alpha-numeric, period/dot, hyphen/dash, [a-zA-Z0-9] . sipuser usr SIP user name used for authentication in ASCII string format. It is an string of up to 20 alphanumeric and "-" (dash/hyphen) , "+" (plus), "." (dot/period) characters. sippaswd pwd SIP password used for authentication in ASCII string format. At least 6 characters but not more than 20 characters may be used. Characters allowed are: alphanumeric, dot, hyphen (dash) and underscore. Default Values sipuser = null realm = null sippaswd = null Confirmation Message This will affect services on the ONT. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (assign the bootstrap data defined in the ont-sipconfig profile called "domain345". The attribute values will be downloaded via OMCI to bootstrap the IP-based configuration.) AXS2200> set ont id au-5-1-3 voipconfig sipuser sipOnt-OLT75-MA27-an realm ss123.motorola.com sippaswd xyzzy494 ont-sipconfig domain345 Command completed successfully Error Codes ONT does not exist Invalid domain name or syntax Invalid password Invalid user User entered value is longer than 255 characters Invalid ONT Profile name not found in Profile Table VOIP is not configured or supported on ONT Page 706 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP set ont id (ontaddress) voipconfig static-ipaddr-mode ipaddr (ip) submask (mask) defgw (gateway) primdns (ip) secdns (ip) Description This command allows the user to set an ONT to static IP address assignment for the voice service on the ONT (valid for both for E-H.248 and SIP). The user is required to supply the IP Address, Subnet mask and Default gateway. Primary and Secondary DNS servers are optional. Validation rules for attributes: IP Addresses must be unicast address, excluded are - broadcast address - multicast addresses (224.0.0.0 - 239.255.255.255) - limited broadcast addresses (240.0.0.0 - 255.255.255.255) Allowed subnet mask: 255.255.255.M 255.255.M.0 255.M.0.0 M.0.0.0 where M is one of {0,128,192,224,240,248,252,254,255} User Privilege Level: Superuser Required Parameters: static-ipaddr-mode ip ipaddr Numeric IP address mask submask Subnet mask chose for this Layer 3 entity gateway defgw Default gateway chosen for this Layer 3 entity ontaddress id Identifies the ONT by address (e.g. au-3-4-16). voipconfig Optional Parameters: primdns Page 707 ip AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP IP Address of the Primary DNS Server secdns ip IP Address of the Secondary DNS Server Default Values ipaddr = 0.0.0.0 submask=0.0.0.0 def-gw=0.0.0.0 primdns=0.0.0.0 secdns=0.0.0.0 Confirmation Message This will affect services on the ONT. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (ONT in SIP or E-H.248 voice mode) AXS2200> set ont id au-5-1-3 voipconfig 255.255.255.0 def-gw 192.168.1.1 static-addr-mode ipaddr 192.168.1.228 submask This will affect services on the ONT. Do you want to continue? y | n >y Command completed successfully Example 2: (DHCP, ONT in tdm voice mode) AXS2200> set ont id au-5-1-3 voipconfig 255.255.255.0 def-gw 192.168.1.1 This will affect services on the ONT. Do you want to continue? y | n >y static-addr-mode ipaddr 192.168.1.228 submask Invalid voice mode Error Codes ONT does not exist Invalid ONT Invalid voice mode Invalid default gateway Invalid IP Address Invalid primary DNS server Invalid secondary DNS server Invalid subnet mask Invalid - IP Address already statically assigned Page 708 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP show ont voip (ontaddress) detail (summary | verbose) Description This command displays the VOIP configuration for a specified ONT. If detail level is specified as verbose, additional information such as SIP profile download counters and all profile contents will be displayed at the end of the result page. Note: this can be a large amount of data. If not supplied by the user, detail defaults to summary. The report always includes these fields: - ONT Name - ONT Serial Number: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - ONT Channel on the PON - ONT Address (AID) The following VOIP information applies to the ONT: - VoIP Mac Address - IP Address Mode: {static | dhcp} - DHCP connStatus: none (static assignment mode) none(incomplete configuration or in static IP mode) connected = received IP address and other required information from the DHCP failed(reason) = ICMP error, malformed response, inadequate info response, timeout Trying to contact the DHCP server should quickly transition to the "connected" or "failed" state. - IP address: Current IP address Mask: Subnet mask Gateway: Default gateway Primary DNS: IP address for the primary SIP DNS Secondary DNS: IP address for the secondary SIP DNS - VoIP Oper. Status: {UAnotConfig, duplicateIP, configDone, failConfigSubscr(reason), failConfigGet(reason)} where reason = {ICMP error, cannot authenticate, timeout, servFailCode, malformed document, cannot resolve domain name} Affected Profile: = {Trust Anchor, Local Network Profile} when Oper. Status = failConfigSubscr or failConfigGet = {n/a} otherwise Server Failure Code Value: = {3xx, 4xx, 5xx, 6xx} when reason = servFailCode = {n/a} otherwise - Page ont-sipConfig Profile: qbdef or name Config proxy: Null or IP or FQDN Local Domain in Use: Domain Name from DHCP or from ont-sipConfig profile or Null User: Null or Name string Realm: Null or Domain Name Abandoned Call TCA Threshold: n RTCP Packet Failure Alarm Threshold: n Packet Loss Fraction TCA Threshold: n % (n) (8 bit notation in brackets) 709 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP - RTP Jitter TCA Threshold: n - SIP Message Timeout TCA Threshold: n If detail == verbose, the following information about ONT-level SIP profiles (Trust Anchor, Local Network Profile (LNP) is added: Profile Id Subscription State Subscrition Status Retry Interval Retrieval Count Last Notify Notify Action Content Id Last subscribed Download State Download Retry Count Download Retrieval Count Last Download Profile Contents User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Optional Parameters: detail summary | verbose Allows the user to specify the level of detail to be returned in the command output Default Values detail = summary Confirmation Message Command completed successfully Example(s) Example 1: IP-based configuration AXS2200> show ont voip au-3-1-16 =============================================================================== ONT VOIP REPORT DATE: 08/17/2000 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 Page 710 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP ONT Address (AID): au-3-1-16 VoIP Mac Address: 00:30:2d:41:67:bf IP Address Mode: dhcp DHCP connStatus: connected IP address: 12.3.5.7 Mask: 255.255.255.0 Gateway: 12.3.5.6 Primary DNS: 12.4.6.7 Secondary DNS: 12.3.4.5 VoIP Oper. Status: configDone Affected Profile: n/a Server Failure Code Value: n/a ont-sipConfig Profile: domain345 Config proxy: proxy1.lata123.motorola.com Local Domain in Use: region1.motorola.com User: sipOnt-OLT75-MA27-an Realm: ss123.motorola.com Abandoned Call TCA Threshold: 0 RTCP Packet Failure Alarm Threshold: 0 Packet Loss Fraction TCA Threshold: 0 (0) RTP Jitter TCA Threshold: 0 SIP Message Timeout TCA Threshold: 0 =============================================================================== Command completed successfully Example 2: (detail set to verbose) AXS2200> show ont voip au-3-1-16 detail verbose =============================================================================== ONT VOIP REPORT DATE: 08/17/2000 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16 VoIP Mac Address: 00:30:2d:41:67:bf DHCP: enable DHCP connStatus: connected IP address: 12.3.5.7 Mask: 255.255.255.0 Gateway: 12.3.5.6 Primary DNS: 12.4.6.7 Secondary DNS: 12.3.4.5 VoIP Oper. Status: configDone Affected Profile: n/a Server Failure Code Value: n/a ont-sipConfig Profile: domain345 Config proxy: proxy1.lata123.motorola.com Local Domain in Use: region1.motorola.com User: sipOnt-OLT75-MA27-an Realm: ss123.motorola.com Abandoned Call TCA Threshold: 0 RTCP Packet Failure Alarm Threshold: 0 Packet Loss Fraction TCA Threshold: 0 (0) RTP Jitter TCA Threshold: 0 SIP Message Timeout TCA Threshold: 0 Profile Id Subscription State Page 711 TRUST-ANCHOR Subscribed AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Subscrition Status SUBS_UNDEFINED Retry Interval 0 Retrieval Count 3 Last Notify 05/12/2009::22:30:36 Notify Action UPDATE Content Id TRUST_ANCHOR_panGT2_1243340709 Last subscribed 05/12/2009::22:30:36 Download State WebRequestComplete Download Retry Count 0 Download Retrieval Count 1 Last Download 05/12/2009::22:30:42 Profile Contents ----------------certificate=-----BEGIN CERTIFICATE----MIIEGTCCA4KgAwIBAgIJAIeBhSITbnbIMA0GCSqGSIb3DQEBBQUAMIG6MQswCQYD VQQGEwJDQTELMAkGA1UECBMCQkMxEjAQBgNVBAcTCVZhbmNvdXZlcjEhMB8GA1UE ChMYSW5jb2duaXRvIFNvZnR3YXJlLCBJbmMuMRQwEgYDVQQLEwtFbmdpbmVlcmlu ZzEoMCYGA1UEAxMfSW5jb ******************* Profile Id LOCAL-NETWORK Subscription State Subscribed Subscrition Status SUBS_UNDEFINED Retry Interval 0 Retrieval Count 3 Last Notify 05/13/2009::22:30:49 Notify Action NONE Content Id LOCAL_NETWORK_PROFILE_panGT2_1243340717 Last subscribed 05/13/2009::22:30:49 Download State WebRequestComplete Download Retry Count 0 Download Retrieval Count 1 Last Download 05/12/2009::22:30:52 Profile Contents ----------------register_period=86400;register_head_start=300;register_retry_interval=120;sip_dscp=24;subsc r ibe_period=86400;subscribe_head_start=300;sip_timer_t1=500;sip_timer_t2=4000;sip_invite_tim e out=32000;sip_noninvite_timeout=32000;qos_dscp=46;local_ports=10000-4999 ******************* =============================================================================== Command completed successfully Error Codes Invalid ONT VOIP is not configured or supported on ONT ONT does not exist Page 712 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 713 Provisioning - VoIP AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Profiles Provisioning - VoIP Profiles del profile ont-profile name (name) Description This command deletes the entry in the ONT Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values None Confirmation Message Command completed successfully Example(s) Example: AXS2200> del profile ont-profile name specialont Command completed successfully Error Codes Profile in use Profile name not found in Profile Table Default profiles cannot be deleted qbdef profiles cannot be deleted Page 714 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Profiles del profile ont-sipconfig name (name) Description This command deletes the entry in the ont-sipconfig Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries that are in use nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values None Confirmation Message Command completed successfully Example(s) Example: AXS2200> del profile ont-sipconfig name domain345 Command completed successfully Error Codes Default profiles cannot be deleted Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Page 715 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Profiles set profile ont-sipconfig default-name (name) Description This command allows the user to change the default profile for all VoIP ONTs that use the IP-based SIP configuration server. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values system default-name = qbdef Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example: AXS2200> set profile ont-sipconfig default-name sipConfigDefault345 This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Error Codes Profile name not found in Profile Table Page 716 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Profiles set profile ont-sipconfig name (name) configproxy (ip | fqdn) ontdomain (domain) abandcalls (threshold) pktlossfrac (threshold) rtcppktfail (threshold) rtpjitter (threshold) sipmsgto (threshold) Description This command creates the profile with common VoIP configuration data - an IP-based configuration proxy (part of bootstrap data) - ONT domain (part of bootstrap data) - Thresholds for VoIP related Alarm and Event generation Note: Setting a TCA and Alarm threshold attribute to the numeric value of 0 (zero), will disable processing and raising of that particular Alarm/Event. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Optional Parameters: abandcalls threshold Threshold for the number of abandoned VoIP calls above which a TCA will be raised by the ONT. An abandoned call is characterized by the off-hook followed by the on-hook state without any call requests sent in the off-hook state. This event may be triggered by a malfunction in the SLIC hardware or subscriber handset. Valid range is 0-65535 with a default of 0. pktlossfrac threshold Threshold for the fraction of RTP Packets (lost / expected) in percent above which a TCA will be raised by the ONT. Valid range is 0-100 % in steps of 1 with a default of 0. rtcppktfail threshold Threshold for the number of minutes after which the ONT will generate an alarm in case no RTCP Packets have been received during an active session. Valid range is 0-255 with a default of 0. rtpjitter threshold Threshold for the VoIP RTP Jitter in RTP Timestamp units at or above which a TCA will be raised by the ONT. Valid range is 0-4294967295 (unsigned 32 bit integer) with a default of 0. sipmsgto threshold Threshold for the number of SIP Message Timeouts at or above which a TCA will be raised by the ONT. This count applies to all SIP Messages such as INVITE, REGISTER, SUBSCRIBE requests. Possible triggers for SIP message timeouts include network failures or a misconfiguration of upstream SIP nodes/routes. Page 717 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Profiles Valid range is 0-65535 with a default of 0. configproxy ip | fqdn IP address or fully qualified domain name (FQDN) of the SIP configuration proxy. An FQDN or fully qualified domain name contains a host name and a domain name. FQDN := host_name.domain_name The syntax for a host name and a domain name are the same. The guidelines for defining a domain name are provided below: A domain name is made up of labels separated by dots. The maximum length of a domain name is 255 chars. Labels are alphanumeric strings with hyphen; they start with a letter, cannot end with a hyphen, and are case insensitive. A label is {1-63} characters long. Please note that the AXS2200 will check only that - the max length of a domain name is no more than 245 chars (max of 245 via the NBI/XML and 232 via the CLI) - the valid character set includes alpha-numeric, period/dot, hyphen/dash, [a-zA-Z0-9] . ontdomain domain The ontdomain attribute identifies the region in which the ONT physically resides (much like a lata). It is used in the "To" and "Request" headers of the SUBSCRIBE message. It is not necessarily the same string as the realm or protection domain. The guidelines for defining a domain name are provided below: A domain name is made up of labels separated by dots. Labels are alphanumeric strings with hyphen; they start with a letter, cannot end with a hyphen, and are case insensitive. A label is {1-63} characters long. Some newer DNS servers allow a label to start with a digit, contain underscores and the @ symbol, and have a longer minimum length. FQDNs are sometimes terminated by a dot. Please note that the AXS2200 will check only that - the max length of a domain name is no more than 245 chars - the valid character set includes alpha-numeric, period/dot, hyphen/dash, underscore, at symbol [a-zA-Z0-9] . Default Values Page 718 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Provisioning - VoIP Profiles configProxy = "" ontDomain = "" abandcalls = 0 pktlossfrac = 0 rtcppktfail = 0 rtpjitter = 0 sipmsgto = 0 Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> create the bootstrap data in a profile "region1_config" set profile ont-sipconfig name region1_config configProxy proxy1.lata123.motorola.com ontDomain region1.motorola.com Example 2: AXS2200> create the bootstrap data in a profile "region1_config" set profile ont-sipconfig name jittercheck rtpjitter 12 Error Codes Invalid name Invalid configproxy Invalid domain name or syntax Maximum number of allowed profiles exceeded Invalid abandcalls Invalid pktlossfrac Invalid rtcppktfail Invalid rtpjitter Invalid sipmsgto Name already in use Page 719 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 720 Provisioning - VoIP Profiles AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management Remote Management del chassis default gateway Description Disable the default gateway for the chassis. To change an existing default gateway to a new value, first delete the default gateway using del chassis default gateway, then enter the new value using "set chassis default gateway". User Privilege Level: Superuser Default Values none Confirmation Message This will delete the default gateway. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> del chassis default gateway This will delete the default gateway. Do you want to continue? y|n >y Command completed successfully Error Codes Default route has not been configured Page 721 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management del chassis in-band-mgt Description Deletes the IP interface entry for In-band management. In order for this command to succeed, the following prerequisite operations have to be performed by the user: 1. If the default gateway is on the In-Band subnetwork, it has to be deleted first. 2. Any static routes configured with Next-Hop addresses on the In-Band subnetwork have to be deleted first. User Privilege Level: Superuser Default Values None Confirmation Message This operation will remove a management interface and may result in the OLT becoming unreachable. Do you want to proceed? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del chassis in-band-mgt This operation will remove a management interface and may result in the OLT becoming unreachable. Do you want to proceed? y | n > y Command completed successfully Error Codes In-band-mgt IP address is not configured Static route must be deleted first Default gateway must be deleted first. Page 722 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management del ip route (ipaddress) mask (subnetmask) Description Used to delete a static route from the IP routing table. NOTE: Because the System only supports a single route to any particular destination, it is not necessary to indicate the next-hop IP address. User Privilege Level: Admin Required Parameters: mask subnetmask Indicates the subnetwork mask to use. This value may be entered in either: - dotted decimal notation Example: 255.255.255.0 - the number of bits Example: 24 (equivalent to 255.255.255.0) ipaddress Identifies the desired ip-address. Default Values none Confirmation Message This will delete the IP static route. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del ip route 192.70.0.0 mask 255.255.0.0 This will delete the IP static route. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> del ip route 20.0.0.0 mask 24 This will delete the IP static route. Do you want to continue? y | n >y Command completed successfully Error Codes IP route not found IP address and mask are inconsistent Page 723 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 724 Remote Management AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management del snmp trap-dest (ipaddress) Description Deletes the SNMP trap destination address from the OLT. User Privilege Level: Superuser Required Parameters: trap-dest ipaddress The trap destination IP address. This is the IP address of the SNMP manager that will receive SNMP traps. Default Values none Confirmation Message Traps will no longer be forwarded to this destination. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del snmp trap-dest 134.141.13.1 Traps will no longer be forwarded to this destination. Do you want to continue? y|n >y Command completed successfully Error Codes Name address mismatch Invalid address Manager not found Page 725 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management set chassis out-of-band-mgt (oobmgtport) ip-address (ipaddress) mask (subnetmask) Description Sets the out-of-band chassis Ethernet management IP address and subnet mask on Syscon card or sets Ethernet IP address and subnet mask for Video-RPD on Switch card. The address must be a valid class A, B or C address (e.g. the first octet must be in the range 1-223). To change the IP address that is currently in the same network as the chassis default gateway, first delete the chassis default gateway, and then change the IP address. This applies to syscon's Management IP address only. To change the IP address that is currently in the same network as a static IP route next-hop IP address, first delete the appropriate static IP route, and then change the IP address. This applies to syscon's Management IP address only. If the IP address is selected for entry, then the mask must also be provided. NOTE: The execution of this command requires that the card be reset in order to make the new settings become active. It could potentially affect remote management connectivity, if existing management routes use this interface. This applies to syscon's Management IP address only. The subnetwork for the SYS-A/B management port must be different from the subnetwork used for the SW-A/B management port. When the command is issued to either the sys-a-enet-mgt1 or sys-b-enet-mgt1 port, the result is the same that the change is applied to the system controller pair. User Privilege Level: Superuser Required Parameters: out-of-band-mgt oobmgtport Indicates the desired Out-of-Band chassis Ethernet management port. Valid values for the port are: - sys-a-enet-mgt1 - sys-b-enet-mgt1 - sw-a-enet-mgt1. Note that slot sw-a of the sw-a/b protection pair is used to specify the logical address regardless of whether sw-a or sw-b is active. mask subnetmask The subnet mask for this IP address ip-address ipaddress Indicates the IP address. Default Values Page 726 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management 172.16.254.254 (IP address) **Should be changed by user at installation 255.255.0.0 (subnet mask) **Should be changed by user at installation mode = auto (autonegotiate half or full duplex and rate (10 or 100)) - not settable Confirmation Message This command will automatically reset the affected card. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set chassis out-of-band-mgt sys-a-enet-mgt1 ip-address 127.134.13.130 mask 255.255.0.0 This command will automatically reset the affected card. Do you want to continue? y | n > y Command completed successfully Example 2: AXS2200> set chassis out-of-band-mgt sw-a-enet-mgt1 ip-address 127.134.13.130 mask 16 This command will automatically reset the affected card. Do you want to continue? y | n > y Command completed successfully Error Codes Invalid IP Address Invalid management port Invalid Mask Management IP address must be in a unique subnet Management port and Video dest-ipaddr cannot be set to the same IP address Management port IP address already configured Management port set failed. Default gateway must be deleted first. Management port set failed. Static route must be deleted first. Video-RPD must first be deleted Switch mgt port and sys mgt port cannot be set to the same IP address Switch Management port must be in a unique subnet Page 727 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management set chassis default gateway (ip-address) Description Sets the default gateway IP address. The system uses the default gateway for all traffic bound for remote networks when there is no return address available. The gateway IP address must either be in the subnet of a configured In-Band IP Interface or be in the same subnetwork of the chassis OOB Ethernet management IP address. It must not be a broadcast, multicast, or all-zeros address. To change an existing default gateway to a new value, first delete the default gateway using del chassis default gateway, then enter the new value using set chassis default gateway. User Privilege Level: Superuser Required Parameters: ip-address This is the desired ip-address. Default Values 0.0.0.0 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set chassis default gateway 233.33.4.100 Command completed successfully Error Codes Invalid IP Address Invalid default route Delete existing Default Gateway before adding a new one Page 728 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management set chassis in-band-mgt ipaddr (ip) mask (subnetmask) svid (svlanid) Description Configures an in-band management IP address with associated subnet mask for the OLT system. IP Addresses must be unicast address, excluded are - broadcast address - multicast addresses (224.0.0.0 - 239.255.255.255) - limited broadcast addresses (240.0.0.0 - 255.255.255.255) Allowed subnet masks if in dotted notation: 255.255.255.M 255.255.M.0 255.M.0.0 M.0.0.0 where M is one of {0,128,192,224,240,248,252,254,255} Allowed subnet mask if in decimal (/CIDR) notation: Integer from 0 - 32 Note: Masks /31 (p2p link) and /32 (single host) will not be usable for this interface type and should not be configured. User Privilege Level: Superuser Required Parameters: ipaddr ip Numeric IP address svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. mask subnetmask Indicates the subnetwork mask to use. This value may be entered in either: - dotted decimal notation Example: 255.255.255.0 - the number of bits Example: 24 (equivalent to 255.255.255.0) Default Values Confirmation Message Command completed successfully Example(s) Example 1: (single-tagged) AXS2200> set chassis in-band-mgt 192.1.1.2 mask 24 svid 100 Command completed successfully Page 729 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management Error Codes In-Band IP Address cannot be in same subnetwork as Syscon Out-of-Band address Invalid IP Address In-Band IP Address cannot be in same subnetwork as Switch Out-of-Band address Invalid Mask In-band VLAN member needs to be defined first In-band-mgt IP address already configured Invalid - Only single-tag VLAN is supported VLAN - SVID already in use and reserved for point to point connections only VLAN not found Page 730 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management set ip route (dest-ipaddress) mask (subnetmask) next-hop (nei-ipaddress) cost (cost) Description Configures a static IP route. This command is intended to configure static routes to remote management systems. Next Hop address must be on either the Out-of-Band management subnetwork or on an (optional) In-Band management subnetwork. Full node routes are supported. Up to 20 static IP routes may be configured in the OLT. User Privilege Level: Admin Required Parameters: mask subnetmask Indicates the subnetwork mask to use. This value may be entered in either: - dotted decimal notation Example: 255.255.255.0 - the number of bits Example: 24 (equivalent to 255.255.255.0) next-hop nei-ipaddress Ip address of next hop in path. This must be on the same subnet as the local interfaces, but cannot be the local interface itself. dest-ipaddress Indicates the destination IP address or destination network address. Expressed in dotted decimal notation. Optional Parameters: cost cost Indicates the cost of the route, and is a number between 1- 15. Usually this is the number of hops associated with the route. Default Values cost=1 Confirmation Message Command completed successfully Example(s) Example 1: (dotted mask notation, no cost specified) AXS2200> set ip route 192.60.0.0 mask 255.255.0.0 next-hop 192.33.100.100 Command completed successfully Example 2: (mask in length of bits) AXS2200> set ip route 192.60.0.0 mask 16 next-hop 192.33.100.100 Command completed successfully Page 731 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management Example 3: (mask in dotted decimal notation) AXS2200> set ip route 192.60.0.0 mask 255.255.0.0 next-hop 192.33.100.100 Command completed successfully Example 4: (cost specified) AXS2200> set ip route 20.0.0.0 mask 24 next-hop 1.1.1.2 cost 3 Command completed successfully Error Codes Next hop and port IP can not be the same IP Address Next hop must be in the same subnetwork as the port IP address Invalid neighbor IP address To configure default gateway, use set chassis default gateway Maximum IP routes already configured Route to this destination already configured IP address and mask are inconsistent Page 732 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management set snmp trap-dest (ipaddress) udpport (udpport) Description Sets the destination IP address and udpport for SNMP traps. The OLT supports up to ten SNMP trap destination IP addresses. The address must be a valid Class A, B or C address (e.g. must be from 1-223). User Privilege Level: Superuser Required Parameters: trap-dest ipaddress The trap destination IP address. This is the IP address of the SNMP manager that will receive SNMP traps. Optional Parameters: udpport udpport This is the UDP port to be used for the destination. The range of valid values is 1-65535. Default Values no default for destination IP address udpport= 162 Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set snmp trap-dest 127.134.13.130 udpport 200 Command completed successfully Error Codes Invalid IP Address SNMP trap destination table is full Page 733 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management set snmp community (communityname) access ({ro | rw}) Description Creates a user-defined SNMP community name, and sets either read-only (ro) or read-write (rw) access for the specified SNMP community name. User Privilege Level: Superuser Required Parameters: access {ro | rw} Indicates Read-Only (ro) or Read-Write (rw) access for this SNMP community name. communityname Identifies the SNMP community name. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set snmp community bostongroup access ro Command completed successfully Error Codes Page 734 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management show ip route Description Used to display all configured static management IP routes. For each static route, the following information is reported: - Learned Protocol: the protocol used to discover this route static = user configured it using 'set ip route' local= local system interface provisioning default= default gateway - route IP address - subnetwork mask - next-hop IP address - Cost Metric The report is presented in order of IP address. User Privilege Level: Operator Default Values all IP routes Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show ip route =============================================================================== IP ROUTE REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Protocol -------default static local(O) Route IP Address ---------------0.0.0.0 150.40.0.0 197.60.0.0 Subnetwork Mask --------------0.0.0.0 255.255.0.0 255.255.0.0 Next-Hop IP Address ------------------213.90.111.87 213.90.111.87 155.80.80.50 Cost ---1 10 1 =============================================================================== Command completed successfully Example 2: (with both Out-of-Band and In-Band Interfaces configured) AXS2200> show ip route =============================================================================== IP ROUTE REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Protocol -------default static local(O) local(I) Route IP Address ---------------0.0.0.0 150.40.0.0 197.60.0.0 192.40.0.0 Subnetwork Mask --------------0.0.0.0 255.255.0.0 255.255.0.0 255.255.0.0 Next-Hop IP Address ------------------213.90.111.87 213.90.111.87 0.0.0.0 0.0.0.0 Cost ---1 10 1 1 =============================================================================== Command completed successfully Error Codes No IP routes configured Page 735 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Remote Management show snmp Description Displays the current SNMP settings of the OLT, defined as follows: - Read Community String: Displays the community name assigned to the read-only SNMP community. - Read/Write Community String: Displays the community name assigned to the read-write SNMP community. - IP Trap Destination Addresses: Displays all IP addresses set to receive SNMP traps from the OLT. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show snmp =============================================================================== SNMP REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== SNMP agent configuration parameters Read Community String: [qb5000hdrosnmp] Read/Write Community String: [qb5000hdrwsnmp] Trap Destination IP Address --------------127.134.167.112 127.34.67.13 Addresses UDP Port ---------162 200 =============================================================================== Command completed successfully Error Codes Page 736 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 737 Remote Management AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security 802-1x Security 802-1x del security-radius svid (svlanid) Description Allows the user to delete the vlan used for connection to the RADIUS server. Note that no ONT will be able to be authenticated when there is no connection to the RADIUS server. User Privilege Level: Admin Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values None Confirmation Message Deleting the radius vlan will force 802.1x authentication to fail. Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> del security-radius svid 320 Deleting the radius vlan will force 802.1x authentication to fail. Do you want to continue? y|n >y Command completed successfully. Error Codes Invalid svid VLAN not found Page 738 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security 802-1x set security-radius svid (svlanid) olt (oltwanaid) Description This command allows the user to create the in-band management connection necessary to connect to a customers RADIUS server. User Privilege Level: Admin Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. olt oltwanaid Indicates the OLT interface: - slot-port for a gige interface - lag-index for a link aggregation group Default Values Confirmation Message This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: Using default traffic descriptors AXS2200> set security-radius svid 308 olt sw-a-1 This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully. Example 2: (GigE port on Ethernet card) AXS2200> set security-radius svid 308 olt au-11-1 This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully. Error Codes Invalid LAG address Invalid port Invalid svid Link Aggregation Group has no GigE ports assigned as members Maximun number of security-radius vlan already defined Incomplete command entered VLAN - vlan id already in use Page 739 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security 802-1x set security-radius config clientip (ipaddress) gateway (ipaddress) srvrprimport (value) srvrprimip (ipaddress) srvrsecip (ipaddress) conthresh (integer) srvrsecport (value) key (secretkey) clientmask (subnetmask) Description The OLT Radius Client supports various settings to connect to a customer's Radius Server. Initial Configuration: The following attributes must be set: clientip, clientmask, srvrprimip, key. Subsequent Configuration: If a clientip is specified clientmask must also be specified. The key attribute is the value of the MD5 Key which is an alpha numeric string up to 32 characters. All other attributes can be set individually. See examples below. User Privilege Level: Admin Optional Parameters: srvrprimip ipaddress The Primary RADIUS Server IP Address clientip ipaddress RADIUS client IP Address on the OLT value srvrprimport The primary RADIUS Server Port key secretkey The OLT RADIUS Client supports a shared Secret Key exchange with the RADIUS Server. It is assumed that the customer will generate the Secret Key and place it on the RADIUS Server as well as the OLT RADIUS Client. clientmask subnetmask The Client Mask will be in the following form: xxx.xxx.xxx.xxx srvrsecport value The secondary RADIUS Server port srvrsecip ipaddress Secondary Server IP Address conthresh integer The maximum number of times the OLT RADIUS Client Page 740 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security 802-1x will try to connect to the RADIUS Server before issuing an event that it exceeded it's threshold. The Range is from 1-10 gateway ipaddress This is the IP Address of the default gateway. Default Values srvprimport = 1812 conthresh = 4 Confirmation Message This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: Initial config with one RADIUS server AXS2200> set security-radius config clientip 198.12.12.115 clientmask 255.255.255.0 gateway 198.12.12.1 srvrprimip 198.12.12.12 key 1188f67d48c9f11afb8572977ef74c5e This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully. Example 2: Initial config with two RADIUS servers and you want to add them initially and leave others as is AXS2200> set security-radius config clientip 198.12.12.115 clientmask 255.255.255.0 gateway 198.12.12.1 srvrprimip 198.12.12.12 srvrsecip 198.12.12.21 srvrsecport 1812 key 1188f67d48c9f11afb8572977ef74c5e This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully. Example 3: After set up of initial config, change shared secret key AXS2200> set security-radius config key 2199f67d48c9f11afb8572977ef74d8e This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully. Example 4: After set up of initial config, change Client IP AXS2200> set security-radius config clientip 198.12.12.11 clientmask 255.255.248.0 This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully. Page 741 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security 802-1x Error Codes Client IP Address and Client Subnet Mask must be configured at the same time Client IP Address and Gateway IP Address must be in same subnet Client IP, Client Mask, Prime Server IP, MD5 Key required for initial config Invalid IP Address Invalid RADIUS connection threshold Invalid MD5 Key Page 742 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security 802-1x show security-radius dot1x Description Allows the user to retrieve a report that depicts the RADIUS client configuration as well as the Vlan configuration. For 7.2 and later we added dot1x as an attribute in the command. User Privilege Level: Admin Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show security-radius dot1x =============================================================================== RADIUS CONFIGURATION REPORT DATE: 08/17/2007 TIME: 16:08:22 =============================================================================== Client IP = 10.121.12.1 Gateway IP = 198.1.1.1.1 Client Radius Port = 1812 Client Netmask = 255.255.255.0 Server Primary Ip = xx.xx.xx.xx Server Primary Port = 1812 Server Secondary Ip = xx.xx.xx.xx Server Secondary Port = 1812 Secret Key = 9e107d9d372bb6826bd81d3542a419d6 Max Conn Threshold = 3 Vlan Configuration Parameters S-VID = 320 OLT AID = sw-a-1 =============================================================================== Command completed successfully Error Codes Page 743 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 744 Security 802-1x AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Security Administration add user name (username) privilege (privilege-level) password Description Adds a new user to the management system. As part of adding a new user, a privilege level and password are assigned. The password can have up to 16 characters. NOTE: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: privilege-level privilege Indicates the level of access the applicable username has to the system. The options are as follows: admin - Allows the user to execute commands in all categories: User Administration Provisioning Maintenance Generic User Interface. superuser - Allows the user to execute commands in the following categories: Provisioning Maintenance Generic User Interface operator - Allows the user to execute commands in the following categories: Maintenance Generic User Interface name username This is the name assigned to a given user. password Default Values None Confirmation Message Password for user <user> Password: Confirm password: Command completed successfully Example(s) Example 1: AXS2200> add user name qbtest2 privilege superuser password Page 745 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Password for user qbtest2 Password: Confirm password: Command completed successfully Error Codes Invalid password - must be 6-16 characters, at least one number and one letter Invalid user name - must be 6-10 characters, at least one number and one letter Username username already in system Page 746 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration del session id (session-id) Description Terminates an active or inactive user session. Can only be run by user with administrator privilege level. Cannot delete one's own active session. User Privilege Level: Admin Required Parameters: session-id id Identifies the user CLI, TL1 or FTP session. The session-id may be found by performing the show sessions command. Default Values None Confirmation Message User session terminated Example(s) Example 1: AXS2200> del session id 1 User session terminated Error Codes invalid session Invalid privilege level Page 747 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration del user name (username) Description Deletes a user from the system. NOTE: The system does not allow the user to delete the default username of "admin". This command is restricted to users with administrator privileges. Deleting a username that is currently logged in is not allowed. User Privilege Level: Admin Required Parameters: name username This is the name assigned to a given user. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del user name qbtest2 Command completed successfully Error Codes Invalid privilege level User 'username' currently logged in Cannot delete user name admin Invalid username Page 748 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set chassis security-radius auth ({olt, radius-olt}) Description This command configures the login authentication for a Console or Telnet CLI user. When the user executes this command, the OLT shall support this command immediately upon the next login action. Note: Upon the initial configuration using set security-radius cli-srvr, the user must have provided at least 1 IP Address (either primary or secondary) and a key. User Privilege Level: Admin Required Parameters: auth {olt, radius-olt} olt: means normal OLT operations for authentication services radius_olt: means the user may use either the login capabilities of the OLT or the Radius server for authentication services depending on the Radius server availability Default Values olt Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set chassis security-radius auth olt This will affect the system security settings. Do you want to continue? y | n Command completed successfully Example 2: AXS2200> set chassis security-radius auth radius-olt This will affect the system security settings. Do you want to continue? y | n Command completed successfully Error Codes Radius authentication requires server address and key Page 749 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set password Description Allows the logged in CLI user to change their own password. User can use up to 16 characters. User Privilege Level: Operator (basic CLI) Default Values None Confirmation Message Password modified - Command completed successfully Example(s) Example 1: AXS2200> set password Setting password for joejoe5 Old Password: ******** New password: ********** Confirm password: ********** Password modified - Command completed successfully Error Codes Invalid password - must be 6-16 characters, at least one number and one letter Invalid password for user "username" - Password not changed Confirm password differs from new password - Password not changed. New password must be different from previous password Page 750 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set security pwdaging (interval) warnint (value) Description Sets the system security password aging capability, and warning interval. When the user attempts to login after the password aging interval has expired, the system will automatically prompt the user to provide a new password before continuing. The system will automatically notify the user if their password is set to expire soon. The number of days to provide warning for is set by warnint. This command will change the password aging interval for all current and new user names, except for those that have individual overrides. Individual override for password aging is set by the command "set user name pwdaging <interval>". This command will change the password aging warning interval for all user names. Note: This command is restricted to users with administrator privileges. User Privilege Level: Admin Optional Parameters: pwdaging interval Sets the password aging interval. Allowed values are {0, 30-365} where 0 disables the password aging. warnint value Sets the password aging warning interval. Values may be from 1-14 days. Default Values pwdaging = 0 warnint = 5 Confirmation Message Command completed successfully Example(s) Example 1: (disable system-wide password aging) AXS2200> set security pwdaging 0 Command completed successfully Example 2: (set password aging interval and warning interval) AXS2200> set security pwdaging 60 warnint 14 Command completed successfully Example 3: (set the password aging warning interval) AXS2200> set security warnint 7 Command completed successfully Page 751 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Error Codes Invalid privilege level Invalid warnint Invalid pwdaging Page 752 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set security login maxretry (value) Description Configures the system setting for security login retry attempts. The system will automatically lockout any user name when the number of maxretry invalid login attempts occur. When set to 0, the system will allow infinite invalid login attempts to occur without disabling the username. This command will change the settings for all current and new user names, except for those who have individual overrides. Individual override for login maximum retry attempts is set by the command "set user name maxretry <value>". Note: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: login maxretry value Indicates the maximum number of login retry attempts that are permitted. Valid values are 0-15, where 0 will disable the login retry feature by allowing infinite retry attempts. Default Values maxretry = 5 Confirmation Message Command completed successfully. Example(s) Example 1: AXS2200> set security login maxretry 5 Command completed successfully Example 2: (allow infinite retry attempts) AXS2200> set security login maxretry 0 Command completed successfully Error Codes Invalid maxretry Page 753 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set security-radius cli-srvr primip (ipaddress) primport (value) secip (ipaddress) secport (value) key (secretkey) conthresh (integer) Description The OLT RADIUS client supports various settings to connect to a customer's RADIUS server. When setting the IP address to 0.0.0.0, the action causes the OLT to clear the reference of an existing RADIUS IP address. The user is allowed to configure the secondary IP and port without configuring the primary IP and port. Upon the initial configuration, the user must provide at least one IP address (either primary or secondary) and a key. User Privilege Level: Admin Optional Parameters: ipaddress primip Primary address of the Radius Server the OLT Radius Client will talk to. value primport The primary RADIUS Server port. ipaddress secip The Secondary IP address of the Radius Server the OLT Radius Client will roll to if the Primary one fails. secport value Secondary Server IP Address port key secretkey The OLT RADIUS Client supports a shared Secret Key exchange with the RADIUS Server. It is assumed that the customer will generate the Secret Key and place it on the RADIUS Server as well as the OLT RADIUS Client. conthresh integer The maximum number of times the OLT RADIUS Client will try to connect to the RADIUS Server before issuing an event that it exceeded it's threshold. The Range is from 1-10 Default Values primport: 1812 secport: 1812 conthresh: 4 primip: 0.0.0.0 secip: 0.0.0.0 Confirmation Message Page 754 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (Initial config with one RADIUS server) AXS2200> set security-radius cli-srvr primip 198.12.12.12 key hello This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully Example 2: (Initial config with two RADIUS servers) AXS2200> set security-radius cli-srvr primip 198.12.12.12 198.12.12.21 secport 1812 key hello primport 1812 secip This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully Example 3: (after initial config, change key) AXS2200> set security-radius cli-srvr key hello This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid IP Address Invalid port Invalid radius connection threshold Invalid secret key Page 755 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set user name (username) ({lock | unlock}) Description Locks or unlocks a user login. If locked, the specified user cannot log on to the system; if unlocked, the user is allowed to log on to the system. When the user name is unlocked, the actual password retry counter is reset to 0. Note: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: name username This is the name assigned to a given user. {lock | unlock} Indicates whether the username will be unlocked (enabled) or locked (disabled). If unlocked, the user may login to the system. If locked, the user will not be allowed to login to the system. Default Values None Confirmation Message Command completed successfully. Example(s) Example 1: (lock a user name) AXS2200> set user name joejoe5 lock Command completed successfully Example 2: (unlock a user name) AXS2200> set user name joejoe5 unlock Command completed successfully Error Codes Invalid user Cannot lock user admin - Command failed Page 756 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set user name (username) login maxretry (value) Description The Login Max Retry value is used to override the system setting for this individual user only. Note that if the system settings for Login Maximum Retry is changed, the username override will NOT be lost. NOTE: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: login username name This is the name assigned to a given user. maxretry value Indicates the maximum number of login retry attempts that are permitted. Valid values are 0-15, where 0 will disable the login retry feature by allowing infinite retry attempts. Default Values by default, set to system wide login max retry value. Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set user name Freddy1 login maxretry 3 Command completed successfully Error Codes Invalid maxretry Invalid user Page 757 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set user name (username) password Description Sets or changes username's password. If a password already exists for username and the user is modifying their own password, the system prompts for entry of the old password before allowing a new password to be entered. If a password exists but the user has admin privileges, the user is not required to enter the old password prior to entering a new password. The password shall contain up to 16 characters. NOTE: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: password name username This is the name assigned to a given user. Default Values None Confirmation Message User password modified Example(s) Example 1 (of an admin changing another user's password:) AXS2200> set user name qbtest2 password Changing password for qbtest2 New password: ****** Confirm password: ****** User password modified Example 2: (of an admin changing their own password): AXS2200> set user name admin password Changing password for admin Old password: ******* New password: ****** Confirm password: ****** User password modified Page 758 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Error Codes New password must be different from previous password Invalid password - must be 6-16 characters, at least one number and one letter User username not found New password not confirmed correctly Page 759 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set user name (username) privilege (privilege-level) Description Changes the security settings for the applicable user name. Privilege level can be: admin - Allows the user to execute commands in all categories: User Administration, Provisioning, Maintenance, and Generic User Interface. superuser - Allows the user to execute commands in the following categories: Provisioning, Maintenance, and Generic User Interface. operator - Allows the user to execute commands in the following categories: Maintenance, and Generic User Interface. NOTE: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: privilege-level privilege Indicates the level of access the applicable username has to the system. The options are as follows: admin - Allows the user to execute commands in all categories: User Administration Provisioning Maintenance Generic User Interface. superuser - Allows the user to execute commands in the following categories: Provisioning Maintenance Generic User Interface operator - Allows the user to execute commands in the following categories: Maintenance Generic User Interface name username This is the name assigned to a given user. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set user name joejoe5 privilege admin Command completed successfully Page 760 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Error Codes Invalid user Invalid privilege level Page 761 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration set user name (username) pwdaging (interval) Description This command is used to override the system setting for password aging for this individual user only. Note that if the system setting for Password Aging is changed this individual username override will NOT be lost. NOTE: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: name username This is the name assigned to a given user. pwdaging interval Sets the password aging interval. Allowed values are {0, 30-365} where 0 disables the password aging. Default Values by default, set to system wide pwdaging value. Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set user name Freddy1 pwdaging 30 Command completed successfully Error Codes Invalid user Invalid pwdaging Page 762 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration show security Description Shows the current configuration settings for system security features: - Maximum Retry Attempts (0 disables automatic user lockout) - Password Aging Interval (0 disables password aging) - Password Aging Warning Interval Note: This command is restricted to users with administrator privileges. User Privilege Level: Admin Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show security =============================================================================== SECURITY CONFIGURATION REPORT DATE: 07/17/2004 TIME: 16:08:22 =============================================================================== Maximum Retry Attempts (0 disables auto user lockout) = 5 Password Aging Interval (0 disables password aging) = 30 days Password Aging Warning Interval = 5 days =============================================================================== Command completed successfully Error Codes Page 763 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration show security-radius cli-srvr Description Allows the user to retrieve a report that depicts the RADIUS Client Configuration for the CLI. Various combinations of states for the Servers can be displayed: Not Accessed Last Connected MM/DD/YYYY HH:MM:SS Last Attempt Fail MM/DD/YYYY HH:MM:SS User Privilege Level: Admin Default Values Confirmation Message Example(s) Example 1: AXS2200> show security-radius cli-srvr =============================================================================== CLI RADIUS CONFIGURATION REPORT DATE: 08/17/2007 TIME: 16:08:22 =============================================================================== Primary Server IP: 0.0.0.0 Primary Server Port: 1812 Secondary Server IP: 0.0.0.0 Secondary Server Port: 1812 Secret Key: hello Client Maximum Connect Threshold : 3 CLI Authentication: radius-olt Primary Server : Last Connected 09/09/2009 Secondary Server: Not Accessed 11:21:31 =============================================================================== Command completed successfully Example 2: AXS2200> show security-radius cli-srvr =============================================================================== CLI RADIUS CONFIGURATION REPORT DATE: 08/17/2007 TIME: 16:08:22 =============================================================================== Primary Server IP: 0.0.0.0 Primary Server Port: 1812 Secondary Server IP: 0.0.0.0 Secondary Server Port: 1812 Secret Key: hello Client Maximum Connect Threshold : 3 CLI Authentication: radius-olt Primary Server IP: Last Attempt Fail 09/09/2009 Secondary Server IP: Not Accessed 11:21:31 =============================================================================== Command completed successfully Page 764 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Error Codes Page 765 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration show sessions Description Lists session information for all active and inactive sessions (either via In-Band or Out-of-Band access), defined as follows: · Session ID: Displays the system-defined value assigned to each session. · Status: Displays the current status of each session. This field displays "ACTIVE" or "INACTIVE". Inactive applies when there is an active telnet session, yet the user hasn't logged in yet. · User Name: Displays the user name used to log on to the system. "?" is used to indicate that the username is not known. It applies to an inactive session. · Privilege: Displays the privilege level of the associated user name. · Duration: Displays the total amount of time the associated user name has been logged on to the system. (DD:HH:MM:SS). · Access: Displays the access method: FTP, TELNET or CONSOLE. · IP Address: Displays the IP address of the remote side of the session for ftp or telnet access methods. · Authentication method: olt or radius or "n/a" (the Authentication method is unknown as the session is just opening and authentication has not completed.) Note: This command is restricted to users with administrator privileges. The system supports up to 4 FTP and 4 Telnet sessions (this includes both In-Band and Out-of-Band access), in addition to a local console. User Privilege Level: Admin Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show sessions =============================================================================== SESSIONS REPORT DATE: 07/17/2009 TIME: 16:08:22 =============================================================================== ID Status User Name Priv Duration Access IP Address Auth --------- ------------- ---------- ------ ---------------0 ACTIVE admin ADMIN 00:1:32:15 FTP 123.23.45.01 olt 1 ACTIVE user200 OPER 00:00:10:27 CON radius 2 ACTIVE joejoe5cxdsfxsxd SUPER 00:00:07:54 TEL 67.115.95.86 olt 3 INACTIVE ? 00:00:00:23 TEL 123.34.11.118 n/a 4 ACTIVE NMSSYS0 ADMIN 22:13:37:22 FTP 142.22.46.74 olt 5 ACTIVE NMSSYS0 ADMIN 10:13:37:22 FTP 142.22.46.74 n/a =============================================================================== Command completed successfully Page 766 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Error Codes Page 767 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration show user name ({username | all}) Description For the requested user name(s), displays the the following settings: - Privilege Level - Status (locked, unlocked) - Max Retry (maximum retry attempts for the login) - Pwd Aging (Password Aging) - Days Left (the number of days left until the current password expires.) - Last Successful Login (date and timestamp of the last successful login for the user name) Privilege levels are: . ADMIN - Allows the user to execute commands in all categories: User Administration, Provisioning, Maintenance, and Generic User Interface. . SUPERUSER - Allows the user to execute commands in the following categories: Provisioning, Maintenance, and Generic User Interface. . OPERATOR - Allows the user to execute commands in the following categories: Maintenance, and Generic User Interface. Note: This command is restricted to users with administrator privileges. User Privilege Level: Admin Required Parameters: name {username | all} indicates individual user or all users Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show user name all =============================================================================== SYSTEM USER REPORT DATE: 08/12/2006 TIME: 12:35:34 =============================================================================== User Name ----------admin testing1 jeffM1 qbtest2 joejoe5 Privilege Level --------ADMIN SUPERUSER OPERATOR OPERATOR SUPERUSER Status -------unlocked unlocked unlocked locked unlocked Max Retry ----10 5 5 3 5 Pwd Aging ----30 30 30 30 30 Days Left -----10 4 20 0 22 Last Successful Login ------------------08/11/2006 00:01:23 07/15/2006 10:00:05 08/04/2006 16:23:54 05/02/2004 08:12:07 08/10/2006 20:04:11 =============================================================================== Command completed successfully. Page 768 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security Administration Example 2: AXS2200> show user name joejoe5 =============================================================================== SYSTEM USER REPORT DATE: 01/12/2004 TIME: 12:35:34 =============================================================================== User Name ----------joejoe5 Privilege Level --------SUPERUSER Status -------unlocked Max Retry ----5 Pwd Aging ----30 Days Left -----22 Last Successful Login -----------------08/10/06 20:04:11 =============================================================================== Command completed successfully. Error Codes User username not found Page 769 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 770 Security Administration AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security IPSEC Security IPSEC del security-ipsec peer-ip (ip-address) Description The command can be used for the following cases: Case 1: In the event a customer enters an IP address and they believes it to be incorrect (e.g., entered the wrong numbers they meant to enter 172.223.34.22 but by mistake they entered 127.223.34.22 ) they can delete the incorrect address by using this command. Case 2: The user can use this command to delete the IP address that is no longer in use by a peer OSS that has communication privileges with the OLT. User Privilege Level: Admin Required Parameters: peer-ip ip-address The user shall enter all IP addresses that the OLT will communicate with. They will be used by the OLT during IKE negotiation. This can be entered on the set or del command Default Values Confirmation Message This command deletes the IP address that is currently entered. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200 > del security-ipsec peer-ip 172.23.45.6 This command deletes the IP address that is currently entered. Do you want to continue? y | n > y Command completed successfully. Error Codes Peer IP address does not exist Request timed out Invalid IP Address Page 771 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security IPSEC set security-ipsec peer-ip (ip-address) Description This command adds the peer IP address to the OLT so it can know which system it is communicating with via IPSEC during IKE negotiation. A maximum of 6 peers can be entered. The peer addresses are added before turning on IPSEC. User Privilege Level: Admin Required Parameters: peer-ip ip-address The user shall enter all IP addresses that the OLT will communicate with. They will be used by the OLT during IKE negotiation. This can be entered on the set or del command Default Values Confirmation Message This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully. Example(s) Example 1: AXS2200> set security-ipsec peer-ip 10.172.23.77 This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully. Error Codes Request timed out Command failed IP Address already exists Invalid IP Address IPSEC Max Peer IP Addresses exceeded Peer IP cannot be in InBand management Subnet Page 772 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security IPSEC set security-ipsec state ({enable | disable}) Description Provides the user the ability to enable (Admin State up) or disable (Admin State down) IPSEC for an OLT. User Privilege Level: Admin Required Parameters: state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). Default Values state = disable Confirmation Message This will affect the system security settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set security-ipsec enable This will affect the system security settings. Do you want to continue? y | n > y Command completed successfully Error Codes Request timed out Command failed Page 773 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security IPSEC set security-ipsec load cert ({file}) passphrase ({passphrase}) Description This command installs the security credential files that have been previously pushed (FTP) to a local area on the OLT. When executed, this command will place all files in their respective secret stores on the OLT. User Privilege Level: Admin Required Parameters: {file} The file name of the PKCS#12 file that neeeds to be unpacked. passphrase {passphrase} User requires a passphrase to begin decoding the PKCS#12 container. Default Values None. Confirmation Message This will affect the system security settings. Do you want to continue? y | n >y Passphrase: ********** Command completed successfully. Example(s) Example 1: AXS2200 > set security-ipsec load cert 1234567 ************ This will affect the system security settings. Do you want to continue? y | n > y Passphrase: ********** Command completed successfully. Error Codes Filename not pkcs12 format Passphrase needed Failed to find requested file <filename> Request timed out Command failed IPSEC CA CERT file does not exist IPSEC CERT file does not exist IPSEC CERT file load failed IPSEC Private Key file does not exist IPSEC must be disabled to configure Page 774 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 775 Security IPSEC AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security IPSEC show security-ipsec {verbose} Description This command will allow the user to create two types or reports: 1. Summary: The OLT's IPSEC state (enabled or disabled). It also lists all the peers that communicate with the OLT as well as shows specific security credentials of the OLT. 2. Verbose: Show all contents of a certificate. User Privilege Level: Admin Required Parameters: {verbose} Show more cert details. Default Values report = summary Confirmation Message Example(s) Example 1: the default report AXS2200> show security-ipsec =============================================================================== IPSEC REPORT DATE: 08/17/2006 TIME: 16:08:22 =============================================================================== OLT IPSEC State: {enable|disable} Peer IP Address -------------------xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx Certificate Summary ---------------------------Certificate Name: oltcert.cer Serial number: 071A Validity: From Date: mm/dd/yyyy To Date: zz/tt/dddy =============================================================================== Command Completed Successfully Example 2: AXS2200> show security-ipsec verbose =============================================================================== IPSEC REPORT DATE: 08/10/2007 TIME: 16:08:22 =============================================================================== OLT IPSEC State: Page 776 {enable|disable} AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Security IPSEC Peer IP Address -------------------xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx Certificate Details ---------------------------General: Issued_to: labs Ca Issued_By: customer Root Ca Issuer: C=US, O=Verizon, OU=Verizon Laboratories, CN=Temp_Labs_Root_CA Validity Not Before: Aug 9 18:01:55 2007 GMT Not After : Sep 8 18:01:55 2007 GMT Subject: C=US, O=Verizon, OU=Verizon Laboratories, CN=Saturn Details: Version: V3 Serial number: 07 Signature Algorithm: sha1WithRSAEncryption 34:a6:65:1c:65:ca:44:48:b9:14:6d:56:4e:37:36:05:e2:5b: a2:dd:61:98:64:a4:1b:9e:f2:ed:cc:c3:0d:ac:07:73:3e:20: 54:a3:35:d8:01:58:25:f2:25:af:9d:1e:c5:3b:08:70:bc:2a: 31:ed:f5:e5:3e:db:f3:54:5f:72:3d:f5:f8:25:9a:f6:f2:9c: b4:1a:6e:ac:e0:8a:c7:b4:e2:b9:69:f6:1b:10:37:a8:5c:f6: 1d:15:10:83:04:44:91:1e:65:fa:30:e8:d5:fb:34:06:ea:f4: d1:bb:fb:fa:13:97:ed:05:05:20:fc:85:ed:60:f1:13:d9:e1: 08:18:02:22:c6:3a:05:62:48:c4:81:eb:b7:5b:b9:cc:55:41: f1:a9:78:d1:ec:ac:ff:2b:aa:28:f7:e5:26:93:36:e6:1f:0a: 62:89:3d:23:bc:70:ba:a4:d4:f7:70:36:99:30:b1:55:70:be: 46:1c:60:04:de:42:a3:f1:97:a0:96:fb:93:4d:07:1f:c8:4e: 56:e1:4d:58:79:3f:03:07:7d:08:28:28:37:b4:8e:1b:13:28: fc:cf:cc:90:d4:cf:01:7e:70:fd:4c:18:53:4c:64:ef:a7:fb: 1d:31:8f:8e:72:16:16:95:31:34:84:62:70:55:95:34:c8:93: 13:7c:6c:e3:b9:74:c4:7c:98:ec:01:c9:67:05:0c:0f:f3:1d: 97:78:b2:c0:34:38:01:d7:c7:5d:c6:fe:aa:0e:2b:1f:43:3d: 9d:a3:fc:ad:18:25:b3:eb:3a:c4:6c:f5:27:2d:e5:f1:c7:d4: 5f:c6:e0:bd:59:fd:c8:de:24:7f:dc:c1:bd:98:4e:39:8f:00: 10:0d:5a:5e:d5:1e:86:e2:87:43:ea:a4:cb:d8:66:65:3c:ad: 75:1f:c6:ee:63:6d:9c:0e:4a:ee:aa:51:a4:6a:eb:93:ba:9f: c2:31:e4:65:63:2a:e2:ce:ce:c4:cc:83:3e:2e:c9:60:09:de: ca:b5:d5:b5:4f:43:39:fd:e5:c5:04:77:df:51:47:23:49:ff: 02:61:b6:88:3f:07:d2:08:7f:ef:96:d3:f1:ff:b1:24:9c:27: 67:82:61:a4:34:5a:c8:a5:b4:fd:5e:7f:e0:4e:44:95:1c:e9: b9:dd:87:a8:8a:c0:aa:57:7d:86:0b:0b:cf:63:7a:3e:6e:a9: 87:e7:2c:ce:87:a3:39:17:39:f3:6b:26:80:26:e2:bc:37:3c: b1:59:67:96:6e:0b:06:dd:7c:dc:94:1a:45:af:f0:b3:7d:37: 74:17:8c:fa:ec:5c:6a:5f:b5:d5:eb:f1:76:13:ef:b5:af:8a: 6d:4e:30:13:07:0e:1b:b0 Subject: Customer text Laboratories: Lab CA, Verizon Public Key: RSA (40869 bin) 00:a6:0f:23:a3:44:35:30:c7:3b:b5:3e:27:e0:66: 70:fa:d3:9b:37:c5:e3:21:d8:83:62:25:85:77:c7: 9b:b8:64:fb:ce:9e:9c:48:02:b6:72:9f:40:4b:e6: 1c:33:69:25:34:15:4d:ae:d8:33:9f:0a:1c:da:01: c6:04:74:91:f6:6a:b8:03:c0:c5:46:ab:9b:1a:90: 3c:34:e5:aa:92:cb:3d:2e:5c:86:df:0d:63:9e:e2: 7b:b9:b3:e5:85:4c:ba:36:cf:99:97:a2:fd:f2:8a: 81:81:e9:3c:92:44:bd:31:db:e7:8e:5c:74:1d:97: 19:9c:d6:d5:20:2c:f6:eb:61 Subject Key Identifier: B4:FC:F3:47:C3:2D:FB:DD:44:76:60:CB:3F:FB:7F:6A:64:C1:EE:F2 =============================================================================== Command completed successfully Error Codes Command failed Certificate data not found Request timed out Page 777 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 778 Security IPSEC AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management Software Management acceptsw Description This command is used to accept the currently running software on the OLT as the default software version for resets. If using redundant controllers, this operation will automatically reboot the standby controller to run the same version of software as the master system controller if it isn't already executing on the standby card. User Privilege Level: Superuser Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> acceptsw Command completed successfully Error Codes Page 779 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management backup database name (backupname) Description Copies the current system database and stores the files in the specified directory of the currently running software on the system controller non-volatile memory (NVM). The user may then, if desired, use ftp commands to copy the files from the NVM to a local PC or other storage device. User Privilege Level: Superuser Required Parameters: name backupname Indicates the name of the backup database file. The name can take up to 14 alphanumeric characters in length. Default Values none Confirmation Message If the backup name is already used, the files will be overwritten. Do you want to continue? y | n >y DB backup has completed Example(s) Example 1: AXS2200> backup database name bu023301 If the backup name is already used, the files will be overwritten. Do you want to continue? y | n >y DB backup has completed Error Codes NVM out of space DB backup has failed Invalid name Request timed out Page 780 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management copy active database version (version-id) Description Copies the currently running system database to the specified version directory in the non-volatile memory of the system controller card. If the specified version is not already there, the system will create the appropriate directory structure. The current version is not a valid entry. User Privilege Level: Superuser Required Parameters: version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. Default Values none Confirmation Message If the version already has active database files, they will be overwritten. Do you want to continue? y | n >y DB copy has been initiated DB copy has completed Example(s) Example AXS2200> copy active database version bu023301 If the directory name is already used, the file will be overwritten. Do you want to continue? y | n >y DB copy has been initiated DB copy has completed Error Codes Request timed out Current version is not valid NVM out of space DB copy has failed Page 781 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management del database backup name (backupname) Description Deletes a previously backed up database from the directory of the non-volatile memory on the system controller card for the currently accepted SW version. User Privilege Level: Superuser Required Parameters: name backupname Indicates the name of the backup database file. The name can take up to 14 alphanumeric characters in length. Default Values none Confirmation Message (if successful) DB backup delete has completed Command completed successfully (if not successful) Command failed Example(s) Example 1: AXS2200> del database backup name bu120300 DB backup delete has completed Command completed successfully Error Codes Name not found DB Backup Delete Has Failed Page 782 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management del database backup version (version-id) name (backupname) Description Deletes a previously backed up database from the the non-volatile memory on the system controller card in the specified version/directory. User Privilege Level: Superuser Required Parameters: version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. name backupname Indicates the name of the backup database file. The name can take up to 14 alphanumeric characters in length. Default Values none Confirmation Message (if successful) DB backup delete has completed Command completed successfully (if not successful) Command failed Example(s) Example 1: AXS2200> del database backup version 1_02 name bu120300 DB backup delete has completed Command completed successfully Error Codes Name not found Version not found DB Backup Delete Has Failed Page 783 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management installbootrom slot (slot) version (version-id) Description This command is used to install a particular bootrom release on a card in the OLT. The bootrom image (axs_<cardname>_bootrom.hex.z) must be available in the System Controller NVM Flash directory for the specified version. The bootrom update will be applied immediately, and the new boot code will be performed upon the next slot reset. If the bootrom version installation fails, an alarm will be raised. This process may take between 1-2 minutes to complete. User Privilege Level: Superuser Required Parameters: version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. slot slot Indicates the slot/card. Default Values none Confirmation Message Updating the BOOTROM will affect card operation after the card is reset. Do you want to continue? y | n >y in progress Command completed successfully Example(s) Example 1: AXS2200> installbootrom slot au-3 version v1_1_1 Updating the BOOTROM will affect card operation after the card is reset. Do you want to continue? y | n >y in progress Command completed successfully Page 784 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management Error Codes Image not found in Version directory Image in Version directory not valid Image copy to target card failed - retry installbootrom Version not found Invalid equipment state for request Invalid slot Image update failed Page 785 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management restore database name (backupname) Description Restores a previously backed up database from the directory of the NVM in which the currently running software resides. The release is assumed to be the currently running release. User Privilege Level: Superuser Required Parameters: name backupname Indicates the name of the backup database file. The name can take up to 14 alphanumeric characters in length. Default Values none Confirmation Message This command will restore the backup database and reset the chassis. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> restore database name backup023301 This command will restore the backup database and reset the chassis. Do you want to continue? y | n >y Command completed successfully Error Codes DB Restore has Failed. Use: ‘flush database’ to continue with current DB. Name not found Page 786 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management restore database version (version-id) name (backupname) Description Restores a previously backed up database from the indicated directory name for the specified release of the NVM in which the software resides. User Privilege Level: Superuser Required Parameters: name backupname Indicates the name of the backup database file. The name can take up to 14 alphanumeric characters in length. version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. Default Values none Confirmation Message This command will restore the backup database and reset the chassis. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> restore database version v1.02 name backup120300 This command will restore the backup database and reset the chassis. Do you want to continue? y | n >y Command completed successfully Error Codes Name not found Version not found DB Restore has Failed. Use: ‘flush database’ to continue with current DB. Page 787 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management set chassis vendor ( FSANid) defaultversion ({disable | ONTversion}) onttype (ontg) Description This CLI command is used to configure the version of ONT software that will be downloaded when an ONT of the specified type is discovered. User Privilege Level: Operator Required Parameters: ontg onttype The supported types of ONT are: - ont1000gt - ont1000gt2 - ont1000gt3 - ont1100ge - ont1120ge - ont1400gt - ont1400gt2 - ont1420gt - sf21000 - sf24200 - sf24200b - sf24210 - wg24200g - wg24200n - ont1500gt - ont6000get - ont6000gvt - md22000 - md24000 - md26000 - wt21004 vendor FSANid 4 letter FSAN vendor ID defaultversion {disable | ONTversion} Sets the version of ONT software used to auto-download the ONT during initial discovery. The ONTversion is the name of the directory in NVM. Setting to "disable" disables auto-download. Default Values None Confirmation Message Page 788 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management This will affect the version to ONT type for ONT automatic software downloads. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (Set ont1000gti version to R5_0_0) AXS2200> set chassis vendor MRCC onttype ont1000gt defaultversion R5_0_0 This will affect the version to ONT type for ONT automatic software downloads. Do you want to continue? y | n >y Command completed successfully Example 2: (Disable auto-download for ont6000gvt) AXS2200> set chassis vendor MRCC onttype ont6000gvt defaultversion disable This will affect the version to ONT type for ONT automatic software downloads. Do you want to continue? y | n >y Command completed successfully Error Codes Unknown vendor code Version not found Page 789 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management show database backup current Description Shows the currently available backups in the directory on the system controller non-volatile memory for the currently running release of software. User Privilege Level: Superuser Required Parameters: current Indicates the currently accepted software version. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show database backup current DB LIST: backup10 backup2 backup3 backup4 backup5 backup6 backup7 backup8 backup9 backup11 backup12 backup13 backup14 backup15 backup1 Command completed successfully. Error Codes Page 790 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management show database backup version (version-id) Description Shows the currently available backups in the directory on the non-volatile memory of the system controller card. If none are available in NVM, an empty list is returned. User Privilege Level: Superuser Required Parameters: version version-id Specifies the desired software version, as indicated by the directory name stored in the nonvolatile memory on the system controller card. The version can take up to 14 characters in length. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show database backup version 1.02 DB LIST: backup10 backup2 backup3 backup4 backup5 backup6 backup7 backup8 backup9 backup11 backup12 backup13 backup14 backup15 backup1 Command completed successfully. Error Codes Invalid version Page 791 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management show database status Description Shows the status of the currently running database. User Privilege Level: Superuser Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show database status DB Status: ok Command completed successfully. Error Codes Page 792 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management show ontinstallsw ({ontaddress | ponaddress}) Description Shows the state of software download operations for an individual ONT, or for all ONTs on a PON. Reported information includes: OLT PON Card Type: AGPONC PON Port Admin State: enable, disable Total Number of ONTs on PON: 1-64 ONT Address Install SW State: The current state of the ontinstallsw operation for the ONT. Values include: No Download, Download Init, Download IP, Updating Flash, Download Failed, Download Success Comp %: The current completion percentage of the ontinstallsw operation. Values are from 1-100%. 100% indicates the download is complete. Software Version: Indicates the software version currently being downloaded, or the version last downloaded if the download was successfully 100% completed. Last Attempt Int (s): Last attempted download interval in seconds. Last Attempt Date: The date of the last attempted download (MM/DD/YY). Last Attempt Time: The timestamp of the last attempted download (HH:MM:SS). Consult the "show ont chassis" report for the version information for the two software images on the ONT, and status of which is accepted and/or active. ONTs that are preprovisioned, and are not yet ranged with an actual serial number will always report No Download. User Privilege Level: Operator Required Parameters: {ontaddress | ponaddress} Selects either an individual ONT, or all ONTs on a PON. For ontaddress, the format is oltslot-port-channel, where the valid choices are: - oltslot (au-1 through au-18 for AXS2200, au-1 through au-14 for AXS1800) - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Example: au-5-1-16 For ponaddress, the format is oltslot-port, where the valid choices are: - oltslot (au-1 through au-18 for AXS2200, au-1 through au-14 for AXS1800) - port (the index of the PON port on the OLT PON card) Example: au-5-1 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (all ONTs on a PON) Page 793 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Software Management AXS2200> show ontinstallsw au-5-1 =============================================================================== ONT INSTALL SOFTWARE REPORT DATE: 08/17/2007 TIME: 16:08:22 =============================================================================== OLT PON Card Type: AGPONC PON Port Admin State: enable Total Number of ONTs on PON: 6 Last Last Last Install SW Comp Software Attempt Attempt Attempt AID State % Version Int(s) Date Time ---------- ---------------- ---- -------------- ------ -------- -------au-5-1-1 Download IP 50 Release7-00-00 265 08/01/07 03:05:54 au-5-1-2 Download Success 100 Release7-00-00 275 08/17/07 15:59:03 au-5-1-3 Download Success 100 Release7-00-00 328 08/17/07 15:32:55 au-5-1-4 Download IP 25 Release7-00-00 293 08/01/07 20:49:27 au-5-1-5 Download Success 100 Release7-00-00 317 08/17/07 15:59:03 au-5-1-6 Updating Flash 100 Release7-00-00 287 08/17/07 15:59:03 =============================================================================== Command completed successfully Example 2: (individual ONT) AXS2200> show ontinstallsw au-5-1-1 =============================================================================== ONT INSTALL SOFTWARE REPORT DATE: 08/17/2007 TIME: 16:08:22 =============================================================================== OLT PON Card Type: AGPONC PON Port Admin State: enable Total Number of ONTs on PON: AID ---------au-5-1-1 Install SW State ---------------Download IP 6 Comp % ---50 Software Version -------------Release7-00-00 Last Attempt Int(s) -----265 Last Attempt Date -------08/01/07 Last Attempt Time -------03:05:54 =============================================================================== Command completed successfully Error Codes Port does not support a PON Invalid ONT PON port is secondary - use primary PON port address Page 794 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 795 Software Management AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Statistics show capacity lagroup (lagid) Description Displays capacity metrics in terms of provisioned bandwidth and number of connections for a link aggregation group. Provisioned capacity is determined by using the following traffic descriptor rates: - PKT: 100% of the provisioned CIR (committed information rate). Displayed information includes: Number of Ports used in LAGroup: Total number of connections capacity: up to 4000 connections for an LAGroup (and up to 4000 connections for all GigE ports and LAGroups in an OLT) Provisioned number of connections: Available number of connections: TX Bandwidth capacity (Mbps): Sum of capacities of all GbE ports assigned to the group. TX Provisioned bandwidth (Mbps): TX Available bandwidth (Mbps): TX Bandwidth subscription: % (provisioned bw/total bw) RX Total bandwidth capacity (Mbps): Sum of capacities of all GbE ports assigned to the group. RX Provisioned bandwidth (Mbps): RX Available bandwidth (Mbps): RX Bandwidth subscription: % (provisioned bw/total bw) User Privilege Level: Operator Required Parameters: lagroup lagid Indicates the particular link aggregation group (lag-{1-128}. Example: lag-100 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show capacity lagroup lag-10 =============================================================================== SHOW CAPACITY LAGROUP REPORT DATE: 11/28/2005 TIME: 16:08:22 =============================================================================== Link Aggregation Group: lag-10 Number of Ports used in LAGroup: 4 Total number of connections capacity: 4000 Provisioned number of connections: 1250 Available number of connections: 2750 Tx bandwidth capacity (Mbps): 4000 Tx Provisioned bandwidth (Mbps): 2000 Page 796 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Tx Available bandwidth (Mbps): 2000 Tx Bandwidth subscription: 50% Rx Rx Rx Rx bandwidth capacity (Mbps): 4000 Provisioned bandwidth (Mbps): 2000 Available bandwidth (Mbps): 2000 Bandwidth subscription: 50% =============================================================================== Command completed successfully Error Codes Invalid for the protection slot of a 1+1 protected group - select working slot Invalid card Slot is empty Page 797 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show capacity slot (slot) Description Displays capacity metrics in terms of provisioned bandwidth and number of connections. Provisioned capacity is determined by using the following traffic descriptor rates: - PKT: For GigE WAN port endpoints, 100% of the provisioned CIR (committed information rate). For PON endpoints, 100% CIR. For the ASW200D card (Switch card with GigE uplinks), the following is shown: NOTE: The switch fabric is non-blocking NOTE: configured connections and bandwidth values do not include any connections to GigE ports that are members of a link aggregation group. Number of Ports on card used in LAGroups: (LA Group connections are not reflected in this report) Provisioned number of gige endpoint connections on card: Per GigE port: Port AID Number of provisioned connections per port Per GigE port (tx direction) Port AID TX Bandwidth subscription: % (provisioned bw/total bw) TX Total bandwidth capacity (Mbps): TX Provisioned bandwidth (Mbps): TX Available bandwidth (Mbps): Per GigE port (rx direction): Port AID RX Bandwidth subscription: % (provisioned bw/total bw) RX Total bandwidth capacity (Mbps): RX Provisioned bandwidth (Mbps): RX Available bandwidth (Mbps): For GPON cards (4 GPON ports), the following is shown: Per card: Upstream (from PON ports): Total bandwidth capacity (Mbps): 5000 Provisioned bandwidth (Mbps): Available bandwidth (Mbps): Bandwidth subscription: % (provisioned bw/total bw) Downstream (from PON ports): Total bandwidth capacity (Mbps): 10000 Provisioned bandwidth (Mbps): Available bandwidth (Mbps): Bandwidth subscription: % (provisioned bw/total bw) Provisioned number of connections: Per PON port: (note, all upstream bandwidth values are based on connection provisioning. TCONT settings may also play a factor and can be viewed using show tcont reports) Port AID Upstream Bandwidth subscription: % (provisioned bw/total bw) Upstream Bandwidth capacity (Mbps): 1244.2 Upstream Provisioned bandwidth (Mbps): Upstream Available bandwidth (Mbps): Per PON port: Port AID Downstream Bandwidth subscription: % (provisioned bw/total bw) Downstream Bandwidth capacity (Mbps): 2488.3 Downstream Provisioned bandwidth (Mbps): Page 798 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Downstream Available bandwidth (Mbps): NOTE: Consult the TCONT available bandwidth for the limiting factor for upstream traffic For Voice Gateway cards (AVGC), the following is shown: Per card: Total number of connections capacity: 4,096 Provisioned number of connections: Available number of connections Total number of CRVs capacity: 6,144 Provisioned number of CRVs: Available number of CRVs: For details about GR-303, TR-08 and T1CAS capacity, consult the commands "show ig index" and "show port vg-ds1". For the AETHA card (GigE Line Card with GigE uplinks), the following is shown: NOTE: configured connections and bandwidth values do not include any connections to GigE ports that are members of a link aggregation group. Number of Ports on card used in LAGroups: (LA Group connections are not reflected in this report) Provisioned number of gige endpoint connections on card: Per GigE port: Port AID Number of provisioned connections per port Per GigE port (tx direction) Port AID TX Bandwidth subscription: % (provisioned bw/total bw) TX Total bandwidth capacity (Mbps): TX Provisioned bandwidth (Mbps): TX Available bandwidth (Mbps): Per GigE port (rx direction): Port AID RX Bandwidth subscription: % (provisioned bw/total bw) RX Total bandwidth capacity (Mbps): RX Provisioned bandwidth (Mbps): RX Available bandwidth (Mbps): NOTE: This command is not valid for cards in slots sys-a and sys-b User Privilege Level: Operator Required Parameters: slot slot Indicates the slot/card. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (Switch ASW200D card with GigE uplinks) AXS2200> show capacity slot sw-a =============================================================================== Page 799 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics SHOW CAPACITY SLOT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Card: ASW200D Number of Ports on card used in LAGroups: 0 (LA Group connections are not reflected in this report) Provisioned number of gige endpoint connections on card: 1800 GigE Uplinks Port ---1 2 3 4 5 6 7 Conn Prov -------0 450 450 450 450 0 0 Port ---1 2 3 4 5 6 7 Tx Subs -----0.0 % 31.3 % 31.3 % 31.3 % 31.3 % 0.0 % 0.0 % (Megabits per second) Tx Tx Tx Capacity Prov Available --------- -------- --------0.0 0.0 0.0 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 0.0 1000.0 1000.0 0.0 1000.0 Port ---1 2 3 4 5 6 7 Rx Subs -----0.0 % 31.3 % 31.3 % 31.3 % 31.3 % 0.0 % 0.0 % (Megabits per second) Rx Rx Rx Capacity Prov Available --------- -------- --------0.0 0.0 0.0 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 0.0 1000.0 1000.0 0.0 1000.0 =============================================================================== Command completed successfully Example 2: (AGPONC card) AXS2200> show capacity slot au-5 =============================================================================== SHOW CAPACITY SLOT REPORT DATE: 04/17/2005 TIME: 16:08:22 =============================================================================== Card: AGPONC Upstream (From PON ports): Total bandwidth capacity (Mbps): 5000 Provisioned bandwidth (Mbps): 32 Available bandwidth (Mbps): 4968 Bandwidth subscription: 0.64% Downstream (To PON ports): Total bandwidth capacity (Mbps): 10000 Provisioned bandwidth (Mbps): 80 Available bandwidth (Mbps): 9920 Bandwidth subscription: 0.8% Page 800 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Provisioned number of connections: 40 PON Port ---1 2 3 4 Upstream Subscription -----------0.6 % 0.6 % 0.6 % 0.6 % (Megabits per second) Upstream Upstream Upstream Capacity Prov Available --------- -------- --------1244.3 8 1236.2 1244.3 8 1236.2 1244.3 8 1236.2 1244.3 8 1236.2 PON Port ---1 2 3 4 Downstream Subscription -----------0.8 % 0.8 % 0.8 % 0.8 % (Megabits per second) Downstream Downstream Capacity Prov ---------- ---------2488.3 20 2488.3 20 2488.3 20 2488.3 20 Downstream Available ---------2468.3 2468.3 2468.3 2468.3 NOTE: Consult the TCONT available bandwidth for the limiting factor for upstream traffic =============================================================================== Command completed successfully Example 3: (Voice Gateway AVGC card) AXS2200> show capacity slot au-1 =============================================================================== SHOW CAPACITY SLOT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Card: AVGC Total number of connections capacity: 4096 Provisioned number of connections: 45 Available number of connections: 4051 Total number of CRVs capacity: 6144 Provisioned number of CRVs: 100 Available number of CRVs: 6044 ============================================================================== Command completed successfully Example 4: (ASW200D card, that has ports 6 and 7 as members of a link aggregation group) AXS2200> show capacity slot sw-a =============================================================================== SHOW CAPACITY SLOT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Card: ASW200D Number of Ports on card used in LAGroups: 2 (LA Group connections are not reflected in this report) Provisioned number of gige endpoint connections on card: 1800 GigE Uplinks Port ---1 2 3 4 5 6 Page 801 Conn Prov -------0 450 450 450 450 - AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics 7 - Port ---1 2 3 4 5 6 7 Tx Subs -----0.0 % 31.3 % 31.3 % 31.3 % 31.3 % % % (Megabits per second) Tx Tx Tx Capacity Prov Available --------- -------- --------0.0 0.0 0.0 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 1000.0 - Port ---1 2 3 4 5 6 7 Rx Subs -----0.0 % 31.3 % 31.3 % 31.3 % 31.3 % % % (Megabits per second) Rx Rx Rx Capacity Prov Available --------- -------- --------0.0 0.0 0.0 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 1000.0 - =============================================================================== Command completed successfully Example 5: (ASW200D card in 10GigE mode, no Link Aggregation) AXS2200> show capacity slot sw-a =============================================================================== SHOW CAPACITY SLOT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Card: ASW200D Number of Ports on card used in LAGroups: 0 (LA Group connections are not reflected in this report) Provisioned number of gige endpoint connections on card: 1800 GigE Uplinks Port ---1 2 3 4 5 6 7 Conn Prov -------1800 0 0 0 0 0 0 Port ---1 2 3 4 5 6 7 Tx Subs -----12.5 % % % % % % % (Megabits per second) Tx Tx Tx Capacity Prov Available --------- -------- --------10000.0 1250.0 8750.0 - Port Rx Subs (Megabits per second) Rx Rx Rx Capacity Prov Available Page 802 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA ---1 2 3 4 5 6 7 Statistics -----12.5 % % % % % % % --------10000.0 - -------1250.0 - --------8750.0 - =============================================================================== Command completed successfully Example 6: (AETHA card with GigE uplinks) AXS2200> show capacity slot au-11 =============================================================================== SHOW CAPACITY SLOT REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Card: AETHA Number of Ports on card used in LAGroups: 0 (LA Group connections are not reflected in this report) Provisioned number of gige endpoint connections on card: 1800 GigE Uplinks Port ---1 2 3 4 5 6 7 8 9 10 11 Conn Prov -------0 450 450 450 450 0 0 0 0 0 0 Port ---1 2 3 4 5 6 7 8 9 10 11 Tx Subs -----0.0 % 31.3 % 31.3 % 31.3 % 31.3 % 0.0 % 0.0 % 0.0 % 0.0 % 0.0 % 0.0 % (Megabits per second) Tx Tx Tx Capacity Prov Available --------- -------- --------0.0 0.0 0.0 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 0.0 1000.0 1000.0 0.0 1000.0 1000.0 0.0 1000.0 1000.0 0.0 1000.0 1000.0 0.0 1000.0 1000.0 0.0 1000.0 Port ---1 2 3 4 5 6 7 8 9 Rx Subs -----0.0 % 31.3 % 31.3 % 31.3 % 31.3 % 0.0 % 0.0 % 0.0 % 0.0 % (Megabits per second) Rx Rx Rx Capacity Prov Available --------- -------- --------0.0 0.0 0.0 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 312.5 687.5 1000.0 0.0 1000.0 1000.0 0.0 1000.0 1000.0 0.0 1000.0 1000.0 0.0 1000.0 Page 803 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 10 11 Statistics 0.0 0.0 % % 1000.0 1000.0 0.0 0.0 1000.0 1000.0 =============================================================================== Command completed successfully Error Codes Invalid slot Invalid for the protection slot of a 1+1 protected group - select working slot Slot is empty Page 804 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show capacity vlan name (vlanname) Description The report shows a summary of the upstream and downstream CIR and PIR configuration of the specified VLAN. The summary is provided in two parts: - ONT members - OLT members Following the summary are two tables: one for the ONT member details and one for the OLT member details. The ONT members summary of the provisioned CIR and PIR rates is provided regardless of whether the ONT VLAN member is active or inactive. The OLT member summary includes the provisioned CIR and PIR of the active MSTP port (if applicable) and the CIR and PIR for all non-MSTP OLT members. This OLT member summary should be used with caution for the following reasons: - OLT members to MSTP ports: CIR and PIR for OLT VLAN members to MSTP ports that are in the blocking mode are not included in the OLT member summary. Therefore if the CIR and PIR configuration is different for the MSTP members, it is possible that the capacity would display differently depending on which MSTP port is forwarding at the time the report is requested. - OLT members to non-MSTP ports: There is no load balancing performed across the WAN ports and the actual forwarding decisions are based on which port learned the MAC address. For each ONT member, the following details are shown: - US CIR: Upstream committed information rate per the assigned traffic descriptor - DS CIR: Downstream committed information rate per the assigned traffic descriptor - US PIR: Upstream peak information rate per the assigned traffic descriptor - DS PIR: Downstream peak information rate per the assigned traffic descriptor - C-VID: For members of a double-tagged VLAN, the C-VID is shown, otherwise "-" is shown for a single-tagged VLAN. For each OLT member, the following details are shown: - US CIR: Upstream committed information rate per the assigned traffic descriptor - DS CIR: Downstream committed information rate per the assigned traffic descriptor - US PIR: Upstream peak information rate per the assigned traffic descriptor - DS PIR: Downstream peak information rate per the assigned traffic descriptor - MSTP: Indicates whether the WAN port is a member of MSTP (yes, no). - FWD: Indicates whether the WAN port is actively forwarding (yes, no). The Summary Totals include only the non-MSTP ports and the active MSTP ports. User Privilege Level: Operator Required Parameters: name vlanname Identifies the name of the VLAN. Can take up to 32 characters in length. Default Values none Confirmation Message Command completed successfully Example(s) Page 805 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Example 1 (single-tagged VLAN without MSTP) AXS2200> show capacity vlan name vlan-401 Upstream (US) = from ONTs to WAN Downstream (DS) = from WAN toward ONTs All values provided in Mbps S-VID: 401 VLAN Name: vlan-401 =============================================================================== SHOW CAPACITY VLAN REPORT DATE: 10/07/2007 TIME: 15:36:55 =============================================================================== ONT Member AID ---------------au-6-2-1-enet-1 au-6-2-2-enet-1 US CIR ------5.0 5.0 US PIR --------10.0 10.0 DS CIR --------5.0 5.0 DS PIR ------10.0 10.0 C-VID ----- OLT Member AID ---------------sw-a-3-401 US CIR ------30.0 US PIR --------40.0 DS CIR --------30.0 DS PIR ------40.0 MSTP ---no Summary Totals US CIR --------------------ONT Members 10.0 Active OLT Members 30.0 US PIR --------20.0 40.0 DS CIR --------10.0 30.0 DS PIR ------20.0 40.0 FWD ---yes =============================================================================== Command completed successfully Example 2 (double-tagged VLAN with MSTP) AXS2200> show capacity vlan name vlan-16-data Upstream (US) = from ONTs to WAN Downstream (DS) = from WAN toward ONTs All values provided in Mbps S-VID: 16 VLAN Name: vlan-16-data =============================================================================== SHOW CAPACITY VLAN REPORT DATE: 10/07/2007 TIME: 15:36:55 =============================================================================== ONT Member AID ---------------au-6-2-1-enet-1 au-6-2-1-enet-2 au-6-2-2-enet-1 au-6-2-3-enet-1 au-6-2-4-enet-2 au-6-2-5-enet-1 au-6-2-11-enet-1 US CIR ------5.0 5.0 5.0 5.0 5.0 5.0 5.0 US PIR --------10.0 10.0 10.0 10.0 10.0 10.0 10.0 DS CIR --------5.0 5.0 5.0 5.0 5.0 5.0 5.0 DS PIR ------10.0 10.0 10.0 10.0 10.0 10.0 10.0 C-VID ----20 21 22 23 24 25 26 OLT Member AID ---------------sw-a-3-16 sw-a-4-16 US CIR ------50.0 50.0 US PIR --------100.0 100.0 DS CIR --------300.0 300.0 DS PIR ------500.0 500.0 MSTP ---yes yes Summary Totals US CIR --------------------ONT Members 35.0 Active OLT Members 50.0 US PIR --------70.0 100.0 DS CIR --------35.0 300.0 DS PIR ------70.0 500.0 Page 806 AXS2200 OLT FWD ---yes no R7.4 CLI Reference Guide MOTOROLA Statistics =============================================================================== Command completed successfully Example 3: (single-tagged VLAN without MSTP and multiple WAN members) AXS2200> show capacity vlan name vlan-401 Upstream (US) = from ONTs to WAN Downstream (DS) = from WAN toward ONTs All values provided in Mbps S-VID: 401 VLAN Name: vlan-401 =============================================================================== SHOW CAPACITY VLAN REPORT DATE: 10/07/2007 TIME: 15:36:55 =============================================================================== ONT Member AID ---------------au-6-2-1-enet-1 au-6-2-2-enet-1 au-6-2-3-enet-1 au-6-2-4-enet-1 US CIR ------5.0 5.0 5.0 5.0 US PIR --------10.0 10.0 10.0 10.0 DS CIR --------5.0 5.0 5.0 5.0 DS PIR ------10.0 10.0 10.0 10.0 C-VID ----- OLT Member AID ---------------sw-a-3-401 sw-b-6-401 US CIR ------30.0 15.0 US PIR --------40.0 20.0 DS CIR --------30.0 15.0 DS PIR ------40.0 20.0 MSTP ---no no Summary Totals US CIR --------------- ------ONT Members 20.0 Active OLT Members 45.0 US PIR --------40.0 60.0 DS CIR --------20.0 45.0 FWD ---yes yes DS PIR ------40.0 60.0 =============================================================================== Command completed successfully Error Codes Invalid name VLAN not found Page 807 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show capacity vlan svid (svlanid) Description The report shows a summary of the upstream and downstream CIR and PIR configuration of the specified VLAN. The summary is provided in two parts: - ONT members - OLT members Following the summary are two tables: one for the ONT member details and one for the OLT member details. The ONT members summary of the provisioned CIR and PIR rates is provided regardless of whether the ONT VLAN member is active or inactive. The OLT member summary includes the provisioned CIR and PIR of the active MSTP port (if applicable) and the CIR and PIR for all non-MSTP OLT members. This OLT member summary should be used with caution for the following reasons: - OLT members to MSTP ports: CIR and PIR for OLT VLAN members to MSTP ports that are in the blocking mode are not included in the OLT member summary. Therefore if the CIR and PIR configuration is different for the MSTP members, it is possible that the capacity would display differently depending on which MSTP port is forwarding at the time the report is requested. - OLT members to non-MSTP ports: There is no load balancing performed across the WAN ports and the actual forwarding decisions are based on which port learned the MAC address. For each ONT member, the following details are shown: - US CIR: Upstream committed information rate per the assigned traffic descriptor - DS CIR: Downstream committed information rate per the assigned traffic descriptor - US PIR: Upstream peak information rate per the assigned traffic descriptor - DS PIR: Downstream peak information rate per the assigned traffic descriptor - C-VID: For members of a double-tagged VLAN, the C-VID is shown, otherwise "-" is shown for a single-tagged VLAN. For each OLT member, the following details are shown: - US CIR: Upstream committed information rate per the assigned traffic descriptor - DS CIR: Downstream committed information rate per the assigned traffic descriptor - US PIR: Upstream peak information rate per the assigned traffic descriptor - DS PIR: Downstream peak information rate per the assigned traffic descriptor - MSTP: Indicates whether the WAN port is a member of MSTP (yes, no). - FWD: Indicates whether the WAN port is actively forwarding (yes, no). The Summary Totals include only the non-MSTP ports and the active MSTP ports. pecified VLAN. The summary is provided in two parts: - ONT members - WAN OLT members Following the summary are two tables: one for the ONT member details and one for the OLT WAN member details. The ONT members summary of the provisioned CIR and PIR rates is provided regardless of whether the ONT VLAN member is active or inactive. The WAN OLT summary includes the provisioned CIR and PIR of the active MSTP port (if applicable) and the CIR and PIR for all non-MSTP WAN members. This WAN member summary should be used with caution for the following reasons: - WAN members to MSTP ports: CIR and PIR for WAN VLAN members to MSTP ports that are in the blocking mode are not included in the WAN summary. Therefore if the CIR and PIR configuration is different for the MSTP WAN members, it is possible that the capacity would display differently depending on which MSTP port is forwarding at the time the report is requested. Page 808 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - WAN members to non-MSTP ports: There is no load balancing performed across the WAN ports and the actual forwarding decisions are based on which port learned the MAC address. For each ONT member, the following details are shown: - US CIR: Upstream committed information rate per the assigned traffic descriptor - DS CIR: Downstream committed information rate per the assigned traffic descriptor - US PIR: Upstream peak information rate per the assigned traffic descriptor - DS PIR: Downstream peak information rate per the assigned traffic descriptor - C-VID: For members of a double-tagged VLAN, the C-VID is shown, otherwise "-" is shown for a single-tagged VLAN. For each OLT WAN member, the following details are shown: - US CIR: Upstream committed information rate per the assigned traffic descriptor - DS CIR: Downstream committed information rate per the assigned traffic descriptor - US PIR: Upstream peak information rate per the assigned traffic descriptor - DS PIR: Downstream peak information rate per the assigned traffic descriptor - MSTP: Indicates whether the WAN port is a member of MSTP (yes, no). - FWD: Indicates whether the WAN port is actively forwarding (yes, no). User Privilege Level: Operator Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1 (single-tagged VLAN without MSTP) AXS2200> show capacity vlan svid 401 Upstream (US) = from ONTs to WAN Downstream (DS) = from WAN toward ONTs All values provided in Mbps S-VID: 401 VLAN Name: vlan-401 =============================================================================== SHOW CAPACITY VLAN REPORT DATE: 10/07/2007 TIME: 15:36:55 =============================================================================== ONT Member AID ---------------au-6-2-1-enet-1 au-6-2-2-enet-1 US CIR ------5.0 5.0 US PIR --------10.0 10.0 DS CIR --------5.0 5.0 DS PIR ------10.0 10.0 C-VID ----- OLT Member AID ---------------sw-a-3-401 US CIR ------30.0 US PIR --------40.0 DS CIR --------30.0 DS PIR ------40.0 MSTP ---no Summary Totals --------------- US CIR ------- US PIR --------- DS CIR --------- DS PIR ------- Page 809 AXS2200 OLT FWD ---yes R7.4 CLI Reference Guide MOTOROLA Statistics ONT Members Active OLT Members 10.0 30.0 20.0 40.0 10.0 30.0 20.0 40.0 =============================================================================== Command completed successfully Example 2 (double-tagged VLAN with MSTP) AXS2200> show capacity vlan svid 16 Upstream (US) = from ONTs to WAN Downstream (DS) = from WAN toward ONTs All values provided in Mbps S-VID: 16 VLAN Name: vlan-16-data =============================================================================== SHOW CAPACITY VLAN REPORT DATE: 10/07/2007 TIME: 15:36:55 =============================================================================== ONT Member AID ---------------au-6-2-1-enet-1 au-6-2-1-enet-2 au-6-2-2-enet-1 au-6-2-3-enet-1 au-6-2-4-enet-2 au-6-2-5-enet-1 au-6-2-11-enet-1 US CIR ------5.0 5.0 5.0 5.0 5.0 5.0 5.0 US PIR --------10.0 10.0 10.0 10.0 10.0 10.0 10.0 DS CIR --------5.0 5.0 5.0 5.0 5.0 5.0 5.0 DS PIR ------10.0 10.0 10.0 10.0 10.0 10.0 10.0 C-VID ----20 21 22 23 24 25 26 OLT Member AID ---------------sw-a-3-16 sw-a-4-16 US CIR ------50.0 50.0 US PIR --------100.0 100.0 DS CIR --------300.0 300.0 DS PIR ------500.0 500.0 MSTP ---yes yes Summary Totals US CIR --------------------ONT Members 35.0 Active OLT Members 50.0 US PIR --------70.0 100.0 DS CIR --------35.0 300.0 DS PIR ------70.0 500.0 FWD ---yes no =============================================================================== Command completed successfully Example 3: (single-tagged VLAN without MSTP and multiple WAN members) AXS2200> show capacity vlan svid 401 Upstream (US) = from ONTs to WAN Downstream (DS) = from WAN toward ONTs All values provided in Mbps S-VID: 401 VLAN Name: vlan-401 =============================================================================== SHOW CAPACITY VLAN REPORT DATE: 10/07/2007 TIME: 15:36:55 =============================================================================== ONT Member AID ---------------au-6-2-1-enet-1 au-6-2-2-enet-1 au-6-2-3-enet-1 au-6-2-4-enet-1 US CIR ------5.0 5.0 5.0 5.0 US PIR --------10.0 10.0 10.0 10.0 DS CIR --------5.0 5.0 5.0 5.0 DS PIR ------10.0 10.0 10.0 10.0 C-VID ----- OLT Member AID US CIR US PIR DS CIR DS PIR MSTP Page 810 AXS2200 OLT FWD R7.4 CLI Reference Guide MOTOROLA ---------------sw-a-3-401 sw-b-6-401 Statistics ------30.0 15.0 Summary Totals US CIR --------------- ------ONT Members 20.0 Active OLT Members 45.0 --------40.0 20.0 US PIR --------40.0 60.0 --------30.0 15.0 DS CIR --------20.0 45.0 ------40.0 20.0 ---no no ---yes yes DS PIR ------40.0 60.0 =============================================================================== Command completed successfully Error Codes Invalid svid VLAN not found Page 811 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats conn (connection-name) Description Displays statistics for a configured connection. For endpoints on slots configured for redundancy, the ACTIVE slot will be used for the statistics report. If further information is desired, consult the port statistics for the desired endpoint. Packet connection endpoints report the statistics in terms of packets or octets. The table below shows the details of the statistics that are shown for each endpoint: --------------------------------------------------------------------------------(Note that directionality is toward the WAN on an OLT interface port, or toward the CPE for ONT interfaces, unless otherwise noted) ENDPOINT TYPE STATISTIC ------------- ---------------------------------------------------------------GIGE WAN Rx Packets_64: Received Packets (64 bit) (gige) Tx Packets_64: Transmitted Packets (64 bit) Rx Octets_64: Received Octets (64 bit) Tx Octets_64: Transmitted Octets (64 bit) Port Oper State: active, inactive, or fault. Fault if operStatus for either direction is fault (MIB shows only up or down, and will be down if either direction is down) If Ethernet CFM is enabled, then the additional following data is shown: MEP ID: value of the CFM MEP ID, or n/a MA ID/ VLAN ID: The MA ID for the MEP MD Level: The MD Level for the MEP Next LBM Trans ID: Next LBM transaction ID RX CFM LBM Packets: Number of received LBM Packets RX CFM LBR In-Order Packets: Number of received LBRs that were received in order RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) RX CFM LTM Packets: Number of received LTM packets RX CFM LTR Unexpected Packets: Number of unexpected LTR packets TX CFM LBM Packets: Number of transmitted LBM packets TX CFM LBR Packets: Number of transmitted LBR packets TX CFM LTR Packets: Number of transmitted LTR packets Link Agg Group Rx Packets_64: Received Packets (64 bit) (lag) Tx Packets_64: Transmitted Packets (64 bit) Rx Octets_64: Received Octets (64 bit) Tx Octets_64: Transmitted Octets (64 bit) LAGroup Oper State: active, inactive, or fault. Fault if operStatus for either direction is fault (MIB shows only up or down, and will be down if either direction is down) If Ethernet CFM is enabled, then the additional following data is shown: MEP ID: value of the CFM MEP ID, or n/a MA ID/ VLAN ID: The MA ID for the MEP MD Level: The MD Level for the MEP Next LBM Trans ID: Next LBM transaction ID Page 812 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics RX CFM LBM Packets: Number of received LBM Packets RX CFM LBR In-Order Packets: Number of received LBRs that were received in order RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) RX CFM LTM Packets: Number of received LTM packets RX CFM LTR Unexpected Packets: Number of unexpected LTR packets TX CFM LBM Packets: Number of transmitted LBM packets TX CFM LBR Packets: Number of transmitted LBR packets TX CFM LTR Packets: Number of transmitted LTR packets VOICE GATEWAY Rx Packets: Received Packets (vgw)- H.248 Tx Packets: Transmitted Packets Rx Errored Packets: Received Errored Packets Rx Discarded Packets: Received Discarded Packets Tx Errored Packets: Transmitted Errored Packets Tx Discarded Packets: Transmitted Discarded Packets Port Oper State: active, inactive, or fault. Fault if operStatus for either direction is fault (MIB shows only up or down, and will be down if either direction is down) ONT ENET (enet) Rx Octets: In Octets Tx Octets: : Out Octets Rx Packets: Received packets Tx Packets: Transmitted packets Rx Discards: Received Discards Tx Discards: Transmitted discards Rx Errored packets: Received Errored Packets Tx Errored packets: Transmitted Errored Packets Port Oper State: active, inactive, or fault. Fault if operStatus for either direction is fault (MIB shows only up or down, and will be down if either direction is down) If Ethernet CFM is enabled, then the additional following data is shown: MEP ID: value of the CFM MEP ID, or n/a MA ID/ VLAN ID: The MA ID for the MEP MD Level: The MD Level for the MEP MEP Oper State: {ok, idle, start, failed} RX CFM LBM Packets: Number of received LBM Packets RX CFM LBR In-Order Packets: Number of received LBRs that were received in order RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) RX CFM LTM Packets: Number of received LTM packets RX CFM LTR Unexpected Packets: Number of unexpected LTR packets TX CFM LBM Packets: Number of transmitted LBM packets TX CFM LBR Packets: Number of transmitted LBR packets TX CFM LTR Packets: Number of transmitted LTR packets ONT MOCA Rx Octest: In Octets (moca) Tx Octets: Out Octets Rx Packets: Received packets Tx Packets: Transmitted packets Page 813 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Rx Discards: Received Discrads Tx Discards: Transmitted discards Rx Errored packets: Received Errored Packets Tx Errored packets: Transmitted Errored Packets Port Oper State: active, inactive, or fault. Fault if operStatus for either direction is fault (MIB shows only up or down, and will be down if either direction is down) If Ethernet CFM is enabled, then the additional following data is shown: MEP ID: value of the CFM MEP ID, or n/a MA ID/ VLAN ID: The MA ID for the MEP MD Level: The MD Level for the MEP Next LBM Trans ID: Next LBM transaction ID RX CFM LBM Packets: Number of received LBM Packets RX CFM LBR In-Order Packets: Number of received LBRs that were received in order RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) RX CFM LTM Packets: Number of received LTM packets RX CFM LTR Unexpected Packets: Number of unexpected LTR packets TX CFM LBM Packets: Number of transmitted LBM packets TX CFM LBR Packets: Number of transmitted LBR packets TX CFM LTR Packets: Number of transmitted LTR packets ONT HCNA Rx Octest: In Octets (hcna) Tx Octets: Out Octets Rx Packets: Received packets Tx Packets: Transmitted packets Rx Discards: Received Discrads Tx Discards: Transmitted discards Rx Errored packets: Received Errored Packets Port Oper State: active, inactive, or fault. Fault if operStatus for either direction is fault (MIB shows only up or down, and will be down if either direction is down) If Ethernet CFM is enabled, then the additional following data is shown: MEP ID: value of the CFM MEP ID, or n/a MA ID/ VLAN ID: The MA ID for the MEP MD Level: The MD Level for the MEP Next LBM Trans ID: Next LBM transaction ID RX CFM LBM Packets: Number of received LBM Packets RX CFM LBR In-Order Packets: Number of received LBRs that were received in order RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) RX CFM LTM Packets: Number of received LTM packets RX CFM LTR Unexpected Packets: Number of unexpected LTR packets TX CFM LBM Packets: Number of transmitted LBM packets TX CFM LBR Packets: Number of transmitted LBR packets TX CFM LTR Packets: Number of transmitted LTR packets ONT POTS/VOIP Rx octest: Total Octets received from the voice ports (voip) Tx Octets: Total Octets transmitted to the voice ports Page 814 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Rx Packets: Total Packets received from the voice ports Tx packets: Total Packets transmitted to the voice ports Rx Errored packets: Received Errored Packets Tx Errored packets: Transmitted Errored Packets Tx Discarded Packets: Transmit Discarded Packets Rx Discarded Packets: Discarded Packets Connection Oper State: active, inactive, or fault fault = when either direction of the connection is down Port Oper State: n/a - not applicable for VoIP If Ethernet CFM is enabled, then the additional following data is shown: MEP ID: value of the CFM MEP ID, or n/a MA ID/ VLAN ID: The MA ID for the MEP MD Level: The MD Level for the MEP Next LBM Trans ID: Next LBM transaction ID RX CFM LBM Packets: Number of received LBM Packets RX CFM LBR In-Order Packets: Number of received LBRs that were received in order RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) RX CFM LTM Packets: Number of received LTM packets RX CFM LTR Unexpected Packets: Number of unexpected LTR packets TX CFM LBM Packets: Number of transmitted LBM packets TX CFM LBR Packets: Number of transmitted LBR packets TX CFM LTR Packets: Number of transmitted LTR packets ONT POTS/H.248 Rx Octets: Total Octets received from the voice ports (h248) Tx Octets: Total Octets transmitted to the voice ports Rx Packets: Total Packets received from the voice ports Tx Packets: Total Packets transmitted to the voice ports Tx Errored Packets: Transmitted Errored Packets Rx Errored Packets: Received Errored Packets Tx Discarded Packets: Transmitted Discarded Packets Rx Discarded Packets: Received Discarded Packets Connection Oper State: active, inactive, or fault fault = when either direction of the connection is down ONT VDSL2 Rx Octets: In Octets (vdsl2) Tx octets: Out Octets Rx Packets: Received Packets Tx Packets: Transmitted Packets Rx Discards: Received Discards Tx Discards: Transmitted Discards Tx Errored Packets: Transmitted Errored Packets Rx Errored Packets: Received Errored Packets Port Oper State: active, inactive, or fault. Fault if operStatus for either direction is fault (MIB shows only up or down, and will be down if either direction is down) If Ethernet CFM is enabled, then the additional following data is shown: MEP ID: value of the CFM MEP ID, or n/a MA ID/ VLAN ID: The MA ID for the MEP MD Level: The MD Level for the MEP Next LBM Trans ID: Next LBM transaction ID RX CFM LBM Packets: Number of received LBM Packets RX CFM LBR In-Order Packets: Number of received LBRs that were Page 815 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics received in order RX CFM LBR Out-of-Order Packets: Number of received LBRs that were received out of order RX CFM LBR Bad MSDU Packets: Number of received LBRs whose mac_service_data_unit did not match the corresponding LBM (except for opcode) RX CFM LTM Packets: Number of received LTM packets RX CFM LTR Unexpected Packets: Number of unexpected LTR packets TX CFM LBM Packets: Number of transmitted LBM packets TX CFM LBR Packets: Number of transmitted LBR packets TX CFM LTR Packets: Number of transmitted LTR packets User Privilege Level: Operator Required Parameters: conn connection-name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: (ONT Enet to OLT GigE, Ethernet CFM enabled) AXS2200> show stats conn alpha1 =============================================================================== Connection Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Connection Name: alpha1 Connection Status: active ONT Endpoint (enet) au-5-1-16-enet-1 RX packets: 546123 TX packets: 123456 Port Oper State: active Receive RX Octets: 3847137 RX Errored Packets: 2 RX Discarded Packets: Transmit TX Octets: 9874779 TX Errored Packets: 0 TX Discarded Packets: -> <- Receive Rx Octets_64: 7799776 0 Transmit Tx Octets_64: 9876630 0 MEP ID: 2 MA ID/VLAN ID: 16 MD Level: 3 Next LBM Trans ID: 52 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: RX CFM LBR Bad MSDU Packets: 0 Page 816 OLT Endpoint (gige) sw-a-4-40-16 Tx Packets_64: 556127 Rx Packets_64: 124555 Port Oper State: active 0 MEP ID: 2 MA ID/VLAN ID: 40 MD Level: 2 Next LBM Trans ID: 2 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: RX CFM LBR Bad MSDU Packets: 0 AXS2200 OLT 0 R7.4 CLI Reference Guide MOTOROLA RX RX TX TX TX Statistics CFM CFM CFM CFM CFM LTM LTR LBM LBR LTR Packets: 4 Unexpected Packets: Packets: 2 Packets: 5 Packets: 4 RX RX TX TX TX 0 CFM CFM CFM CFM CFM LTM LTR LBM LBR LTR Packets: 4 Unexpected Packets: Packets: 4 Packets: 5 Packets: 4 0 =============================================================================== Command completed successfully Example 2 (ONT MoCA to OLT GigE, Ethernet CFM enabled) AXS2200> show stats conn alpha1 =============================================================================== Connection Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Connection Name: alpha1 Connection Status: active ONT Endpoint (moca) au-5-1-16-moca-1 RX Packets: 546123 TX Packets: 123456 Port Oper State: active Receive RX Octets: 3847137 RX Errored Packets: 2 RX Discarded Packets: Transmit TX Octets: 9874779 TX Errored Packets: 0 RX Discarded Packets: -> <- OLT Endpoint (gige) sw-a-4-40-21 Tx Packets_64: 556127 Rx Packets_64: 124555 Port Oper State: active Receive Rx Octets_64: 8806620 0 Transmit Tx Octets_64: 238779 0 MEP ID: 2 MA ID/VLAN ID: 21 MD Level: 3 Next LBM Trans ID: 52 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LTM Packets: 4 RX CFM LTR Unexpected Packets: 0 TX CFM LBM Packets: 2 TX CFM LBR Packets: 5 TX CFM LTR Packets: 4 MEP ID: 2 MA ID/VLAN ID: 40 MD Level: 2 Next LBM Trans ID: 2 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LTM Packets: 4 RX CFM LTR Unexpected Packets: 0 TX CFM LBM Packets: 4 TX CFM LBR Packets: 5 TX CFM LTR Packets: 4 =============================================================================== Command completed successfully Example 3 (ONT VoIP/SIP to OLT GigE, Ethernet CFM enabled) AXS2200> show stats conn alpha1 =============================================================================== Connection Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Connection Name: alpha1 Connection Status: active ONT Endpoint (voip) au-5-1-16-voip Rx Packets: 546123 Page 817 -> OLT Endpoint (gige) sw-a-4-40-2019 Tx Packets_64: 546123 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Tx Packets: 123452 Port Oper State: n/a <- Rx Packets_64: 123456 Port Oper State: active Receive Rx Octets: 2667883 Rx Errored Packets: 0 Rx Discarded Packets: 0 Receive Rx Octets_64: 662997 Transmit Tx Octets: 874766 Tx Errored Packets: 4 Tx Discarded Packets: Transmit Tx Octets_64: 879870 4 MEP ID: 2 MA ID/VLAN ID: 2019 MD Level: 3 Next LBM Trans ID: 52 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LTM Packets: 4 RX CFM LTR Unexpected Packets: 0 TX CFM LBM Packets: 2 TX CFM LBR Packets: 5 TX CFM LTR Packets: 4 MEP ID: 2 MA ID/VLAN ID: 40 MD Level: 2 Next LBM Trans ID: 2 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LTM Packets: 4 RX CFM LTR Unexpected Packets: 0 TX CFM LBM Packets: 4 TX CFM LBR Packets: 5 TX CFM LTR Packets: 4 =============================================================================== Command completed successfully Example 4: (ONT VoIP to OLT Link Agg Group, Ethernet CFM enabled) AXS2200> show stats conn beta =============================================================================== Connection Statistics DATE: 05/31/2001 TIME: 07:14:40 =============================================================================== Connection Name: beta Connection Status: active ONT Endpoint (voip) au-5-1-16-voip Rx Packets: 546123 Tx Packets: 123452 Port Oper State: n/a -> <- OLT Endpoint (lag) lag-10-20-2013 Tx Packets_64: 546123 Rx Packets_64: 123456 LAGroup Oper State: active Receive Rx Octets: 37898827 Rx Errored Packets: 0 Rx Discarded Packets: 0 Receive Rx Octets_64: 8774990 Transmit Tx Octets: 9884004 Tx Errored Packets: 4 Tx Discarded Packets: Transmit Tx Octets_64: 8877739 4 MEP ID: 2 MA ID/VLAN ID: 2013 MD Level: 3 Next LBM Trans ID: 52 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LTM Packets: 4 RX CFM LTR Unexpected Packets: 0 TX CFM LBM Packets: 2 TX CFM LBR Packets: 5 Page 818 MEP ID: 2 MA ID/VLAN ID: 20 MD Level: 2 Next LBM Trans ID: 2 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LTM Packets: 4 RX CFM LTR Unexpected Packets: 0 TX CFM LBM Packets: 4 TX CFM LBR Packets: 5 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics TX CFM LTR Packets: 4 TX CFM LTR Packets: 4 =============================================================================== Command completed successfully Example 5: (ONT VDSL2 to OLT GigE, Ethernet CFM enabled) AXS2200> show stats conn alpha1 =============================================================================== Connection Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Connection Name: alpha1 Connection Status: active ONT Endpoint (vdsl2) au-5-1-16-vdsl2-1 RX Packets: 546123 TX Packets: 123456 Port Oper State: active -> <- OLT Endpoint (gige) sw-a-4-40-35 Tx Packets_64: 556127 Rx Packets_64: 124555 Port Oper State: active Receive Rx Octets: 37898827 Rx Errored Packets: 0 Rx Discarded Packets: 0 Receive Rx Octets_64: 8774990 Transmit Tx Octets: 9884004 Tx Errored Packets: 4 Tx Discarded Packets: Transmit Tx Octets_64: 8877739 4 MEP ID: 2 MEP ID: 2 MA ID/VLAN ID: 35 MA ID/VLAN ID: 40 MD Level: 3 MD Level: 2 Next LBM Trans ID: 52 Next LBM Trans ID: 2 RX CFM LBM Packets: 5 RX CFM LBM Packets: 5 RX CFM LBR In-Order Packets: 2 RX CFM LBR In-Order Packets: 2 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Out-of-Order Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LBR Bad MSDU Packets: 0 RX CFM LTM Packets: 4 RX CFM LTM Packets: 4 RX CFM LTR Unexpected Packets: 0 RX CFM LTR Unexpected Packets: 0 TX CFM LBM Packets: 2 TX CFM LBM Packets: 4 TX CFM LBR Packets: 5 TX CFM LBR Packets: 5 TX CFM LTR Packets: 4 TX CFM LTR Packets: 4 =============================================================================== Command completed successfully Example 6: (ONT H.248 to OLT Voice Gateway) AXS2200> show stats conn alpha1 =============================================================================== Connection Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Connection Name: alpha1 Connection Status: active ONT Endpoint (pots) au-5-1-16-pots Rx Packets: 546123 Tx Packets: 123452 Port Oper State: active Receive Rx Octets: 0 Rx Errored Packets: 0 Page 819 -> <- OLT Endpoint (vgw) au-1-vg-100 Tx Packets: 546123 Rx Packets: 123456 Port Oper State: active Receive Rx Discarded Packets: 0 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Rx Discarded Packets: 0 Transmit Tx Octets: 0 Tx Errored Packets: 4 Tx Discarded Packets: Transmit Tx Discarded Packets: 0 4 =============================================================================== Command completed successfully Example 7: (ONT Enet to OLT GigE, Ethernet CFM disabled) AXS2200> show stats conn alpha1 =============================================================================== Connection Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Connection Name: alpha1 Connection Status: active ONT Endpoint (enet) au-5-1-16-enet-1 RX packets: 546123 TX packets: 123456 Port Oper State: active Receive RX Octets: 3847137 RX Errored Packets: 2 RX Discarded Packets: Transmit TX Octets: 9874779 TX Errored Packets: 0 TX Discarded Packets: -> <- OLT Endpoint (gige) sw-a-4-40-16 Tx Packets_64: 556127 Rx Packets_64: 124555 Port Oper State: active Receive Rx Octets_64: 7799776 0 Transmit Tx Octets_64: 9876630 0 =============================================================================== Command completed successfully Error Codes invalid connection Page 820 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats ds1 (slot-port) type ({ne | fe}) Description Displays the running counter statistics for a DS1 logical port the Voice Gateway card. For framed DS1 ports, the following information is available: Near end statistics are available for either ESF or SF framed interfaces. Far end statistics are available only for ESF framed DS1 interfaces. The Framed DS1 Near End statistics consist of the following data: Errored Seconds (ES) Severely Errored Seconds (SES) Severely Errored Framing Seconds (SEFS) Unavailable Seconds (UAS) Controlled Slip Seconds (CSS) Path Coding Violations (PCV) Line Errored Seconds (LES) Bursty Errored Seconds (BES) Line Code Violations (LCV) Far End (only available with DS1 ESF framing): (If the remote connection is down, all of the following counters will report "n/a".) Errored Seconds (FE-ES) Severely Errored Seconds (FE-SES) Severely Errored Framing Seconds (FE-SEFS) Unavailable Seconds (FE-UAS) Controlled Slip Seconds (FE-CSS) Path Coding Violations (FE-PCV) Line Errored Seconds (FE-LES) Bursty Errored Seconds (FE-BES) Payload Loopback: active, none DS1 ports are framed if they are configured for GR-303, TR-08 or T1CAS protocols. For unframed DS1 ports, only Near End statistics are available. User Privilege Level: Operator Required Parameters: ds1 slot-port Identifies the DS1 physical interface port on the Voice Gateway card. For example: au-1-1 Optional Parameters: type {ne | fe} Indicates the near end (ne) or far end (fe) Default Values type = ne, if not provided Confirmation Message Command completed successfully Page 821 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Example(s) Example 1: (Framed DS1 stats, type = ne by default, DS1 physical interfaces) AXS2200> show stats ds1 au-1-1 =============================================================================== DS1 Statistics DATE: 07/31/2004 TIME: 07:14:40 =============================================================================== DS1 AID: au-1-1 Admin State: enable Oper State: up Type of Statistic: Near End Errored Seconds (ES): 0 Severely Errored Seconds (SES): 0 Severely Errored Framing Seconds (SEFS): Unavailable Seconds (UAS): 0 Controlled Slip Seconds (CSS): 0 Path Coding Violations (PCV): 0 Line Errored Seconds (LES): 0 Bursty Errored Seconds (BES): 0 Line Code Violations (LCV): 0 0 =============================================================================== Command completed successfully Example 2: (framed ESF DS1, type = fe, DS1 physical interfaces) AXS2200> show stats ds1 au-1-1 type fe =============================================================================== DS1 Statistics DATE: 07/31/2004 TIME: 07:14:40 =============================================================================== DS1 AID: au-1-1 Admin State: enable Oper State: up Type of Statistic: Far End Errored Seconds (FE-ES): 0 Severely Errored Seconds (FE-SES): 0 Severely Errored Framing Seconds (FE-SEFS): Unavailable Seconds (FE-UAS): 0 Controlled Slip Seconds (FE-CSS): 0 Path Coding Violations (FE-PCV): 0 Line Errored Seconds (FE-LES): 0 Bursty Errored Seconds (FE-BES): 0 Payload Loopback: none 0 =============================================================================== Command completed successfully Example 3: (ESF framed DS1, type = fe, DS1 physical interfaces, connection to the remote port is down) AXS2200> show stats ds1 au-1-1 type fe =============================================================================== DS1 Statistics DATE: 07/31/2004 TIME: 07:14:40 =============================================================================== DS1 AID: au-1-1 Admin State: enable Oper State: up Type of Statistic: Page 822 Far End AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Errored Seconds (FE-ES): n/a Severely Errored Seconds (FE-SES): n/a Severely Errored Framing Seconds (FE-SEFS): Unavailable Seconds (FE-UAS): n/a Controlled Slip Seconds (FE-CSS): n/a Path Coding Violations (FE-PCV): n/a Line Errored Seconds (FE-LES): n/a Bursty Errored Seconds (FE-BES): n/a Payload Loopback: none Statistics n/a =============================================================================== Command completed successfully Error Codes Invalid for a protection slot of a 1+1 protected group - select working slot Voice gateway not equipped DS1 interface not configured for ESF framing Invalid port Page 823 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats gige (slot-port) Description Displays the statistics for a Gigabit Ethernet port. GigE AID: The AID of the Gigabit Ethernet port. Admin State: (enable, disable) Oper State: (up, down) Type: (1000BASE-X full duplex, 10GBASE-X) Availability: (autoNegError, available, notAvailable, unknown) The following statistics are supported: Rx Octets_64 Received Octets (64 bit) Tx Octets_64 Transmitted Octets (64 bit) Rx Unicast Packets_64 Received Unicast Packets (64 bit) Rx Multicast Packets_64 Received Multicast Packets (64 bit) Rx Broadcast Packets_64 Received Broadcast Packets (64 bit) Rx Packets Discarded Received Packets Discarded With No Errors/no Undersized/no Oversized Rx Errors Received Packets With Errors Rx FCS Errors Received Frames With FCS Errors Rx Pause Received Pause Frames Rx Runts Received Runt Frames Rx Undersize Received Undersize Frames Rx Oversize Received Oversize Frames (Frames larger than 9216 bytes) Tx Unicast_64 Transmitted Unicast Packets (64 bit) Tx Multicast Packets_64 Transmitted Multicast Packets (64 bit) Tx Broadcast Packets_64 Transmitted Broadcast Packets (64 bit) Tx Packets Discarded Transmitted Packets Discarded With No Errors Tx Errors Transmitted Packets With Errors Tx Pause Transmitted Pause Frames and, if port is member of a Link Aggregation Group: (return 0 if not) Rx LACP Packets: Received LACP Packets Tx LACP Packets: Transmitted LACP Packets Rx Marker Req Packets: Received LACP Marker Protocol Request Packets Tx Marker Resp Packets: Transmitted LACP Marker Protocol Response Packets If 802.3ah Ethernet OAM is enabled, additionally displays these stats: OAM Discovery State: fault, active_send_local, passive_wait, send_local_remote, send_local_remote_OK, send_any, or "-" if local port has OAM disabled OAM Remote Mode: active, passive, unknown or "-" if local port has OAM disabled Tx State for non-OAM PDUs: forward, discard (Note: Tx is toward the WAN) Rx State for non-OAM PDUs: forward, loopback, discard (Note: Rx is from the WAN) Rx OAM PDUs: Number of received OAM PDUs from the WAN Tx OAM PDUs: Number of transmitted OAM PDUs to the WAN Rx Discarded OAM PDUs: Number of received and discarded OAM PDUs Local statistics: - Errored Frames Last Period: Number of errored frames during the last period - Errored Frames Total: Number of errored frames since port initialization - Errored Frames Events: Number of Errored Frame events since port initialization - Errored Frames Seconds Summary Last Period: Number of errored frame seconds during the last period - Errored Frames Seconds Summary Total: Number of errored frame seconds since port initialization - Errored Frames Seconds Summary Events: Number of Errored Frame Seconds Summary events since port initialization Statistics from Remote / Far end side as reported over the OAM channel: - Errored Symbols Last Period: Number of errored symbols during the last period - Errored Symbols Total: Number of errored symbols since port initialization Page 824 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Errored Symbols Period Events: Number of Errored Symbol Period Events since port initialization - Errored Frames Last Period: Number of errored frames during the last period - Errored Frames Total: Number of errored frames since port initialization - Errored Frames Events: Number of Errored Frame events since port initialization - Errored Frames Period Last Period: Number of errored frame periods during the last period - Errored Frames Period Total: Number of errored frame periods since port initialization - Errored Frames Period Events: Number of Errored Frame Period Events since port initialization - Errored Frames Seconds Summary Last Period: Number of errored frame seconds during the last period - Errored Frames Seconds Summary Total: Number of errored frame seconds since port initialization - Errored Frames Seconds Summary Events: Number of Errored Frame Seconds Summary events since port initialization If MSTP is enabled for this port, the following counters are shown: - Rx BPDUs: Number of received Bridge PDUs - Rx Config BPDUs: Number of received Configuration Bridge PDUs - Rx TCN BPDUs: Number of received Topology Change Bridge PDUs - Tx BPDUs: Number of Transmitted Bridge PDUs - Tx Config BPDUs: Number of Transmitted Configuration Bridge PDUs - Tx TCN BPDUs: Number of Transmitted Topology Change Bridge PDUs User Privilege Level: Operator Required Parameters: gige slot-port This idenitifies the gige port on the AXS2200 chassis. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: (Link Layer Ethernet OAM is enabled on the port, MSTP is enabled) AXS2200> show stats gige sw-a-4 =============================================================================== Gige Port Statistics DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== GigE AID: sw-a-4 Admin State: enable Oper State: up Type: 1000BASE-X full duplex Availability: available Rx Tx Rx Rx Rx Rx Page Octets_64: 0 Octets_64: 0 Unicast Packets_64: 0 Multicast Packets_64: 0 Broadcast Packets_64: 0 Packets Discarded: 0 825 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Rx Rx Rx Rx Rx Rx Tx Tx Tx Tx Tx Tx Rx Tx Rx Tx Statistics Errors: 0 FCS Errors: 0 Pause: 0 Runts: 0 Undersize: 0 Oversize: 0 Unicast Packets_64: 0 Multicast Packets_64: 0 Broadcast Packets_64: 0 Packets Discarded: 0 Errors: 0 Pause: 0 LACP Packets: 0 LACP Packets: 0 Marker Req Packets: 0 Marker Resp Packets: 0 OAM Discovery State: passive_wait OAM Remote Mode: unknown Tx State Non-OAMPDUs: forward Rx State Non-OAMPDUs: forward Rx OAM PDUs: 0 Tx OAM PDUs: 0 Rx Discarded OAM PDUs: 0 Local Local Local Local Local Local Remote Remote Remote Remote Remote Remote Remote Remote Remote Remote Remote Remote Errored Errored Errored Errored Errored Errored Rx Rx Rx Tx Tx Tx Errored Errored Errored Errored Errored Errored Errored Errored Errored Errored Errored Errored Frames Frames Frames Frames Frames Frames Last Period: 0 Total: 0 Events: 0 Seconds Summary Last Period: Seconds Summary Total: 0 Seconds Summary Events: 0 0 Symbols Last Period: 0 Symbols Total: 0 Symbols Period Events: 0 Frames Last Period: 0 Frames Total: 0 Frame Events: 0 Frames Period Last Period: 0 Frames Period Total: 0 Frames Period Events: 0 Frames Seconds Summary Last Period: Frames Seconds Summary Total: 0 Frames Seconds Summary Events: 0 BPDUs: Config BPDUs: TCN BPDUs: BPDUs: Config BPDUs: TCN BPDUs: 0 0 0 0 0 0 0 =============================================================================== Command completed successfully Example 2: (Link Layer Ethernet OAM is not enabled on the port) AXS2200> show stats gige sw-a-4 =============================================================================== Gige Port Statistics DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== GigE AID: sw-a-4 Admin State: enable Oper State: up Type: 1000BASE-X full duplex Availability: available Rx Octets_64: Page 826 0 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Tx Tx Tx Tx Tx Tx Rx Tx Rx Tx Statistics Octets_64: 0 Unicast Packets_64: 0 Multicast Packets_64: 0 Broadcast Packets_64: 0 Packets Discarded: 0 Errors: 0 FCS Errors: 0 Pause: 0 Runts: 0 Undersize: 0 Oversize: 0 Unicast Packets_64: 0 Multicast Packets_64: 0 Broadcast Packets_64: 0 Packets Discarded: 0 Errors: 0 Pause: 0 LACP Packets: 0 LACP Packets: 0 Marker Req Packets: 0 Marker Resp Packets: 0 ============================================================================ Command completed successfully Example 3: (10GigE Port on switch card selected but mode is set to using 1GigE Ports) AXS2200> show stats gige sw-a-4 Port is not available in current GigE mode. Error Codes Invalid port Slot contains a different card type Slot is empty Page 827 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats lagroup (lagid) Description Displays the statistics for a Link Aggregation Group. This data set is created by adding counters from all individual member ports upon execution. The removal of ports from a LAG can therefore cause discontinuities in the data set being collected. (New ports being added to a LAG will have their individual counters cleared beforehand) The following statistics are supported: Rx Tx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Tx Tx Tx Tx Tx Tx Rx Tx Rx Tx Octets_64 Received Octets (64 bit) Octets_64 Transmitted Octets (64 bit) Unicast Packets_64 Received Unicast Packets (64 bit) Multicast Packets_64 Received Multicast Packets (64 bit) Broadcast Packets_64 Received Broadcast Packets (64 bit) Packets Discarded Received Packets Discarded With No Errors/no Undersized/no Oversized Errors Received Packets With Errors FCS Errors Received Frames With FCS Errors Pause Received Pause Frames Runts Received Runt Frames Undersize Received Undersize Frames Oversize Received Oversize Frames Unicast_64 Transmitted Unicast Packets (64 bit) Multicast Packets_64 Transmitted Multicast Packets (64 bit) Broadcast Packets_64 Transmitted Broadcast Packets (64 bit) Packets Discarded Transmitted Packets Discarded With No Errors Errors Transmitted Packets With Errors Pause Transmitted Pause Frames LACP Packets: Received LACP Packets LACP Packets: Transmitted LACP Packets Marker Req Packets: Received LACP Marker Protocol Request Packets Marker Resp Packets: Transmitted LACP Marker Protocol Response Packets If MSTP is enabled for this port, the following counters are shown: - Rx BPDUs: Number of received Bridge PDUs - Rx Config BPDUs: Number of received Configuration Bridge PDUs - Rx TCN BPDUs: Number of received Topology Change Bridge PDUs - Tx BPDUs: Number of Transmitted Bridge PDUs - Tx Config BPDUs: Number of Transmitted Configuration Bridge PDUs - Tx TCN BPDUs: Number of Transmitted Topology Change Bridge PDUs User Privilege Level: Operator Required Parameters: lagroup lagid Indicates the particular link aggregation group (lag-{1-128}. Example: lag-100 Default Values none Confirmation Message Command completed successfully Example(s) Page 828 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Example 1: AXS2200> show stats lagroup lag-1 =============================================================================== Link Aggregation Group Statistics DATE: 07/18/2005 TIME: 07:14:40 =============================================================================== LA Group: lag-1 Admin State: enable Oper State: up Rx Tx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Tx Tx Tx Tx Tx Tx Rx Tx Rx Tx Octets_64: 0 Octets_64: 0 Unicast Packets_64: 0 Multicast Packets_64: 0 Broadcast Packets_64: 0 Packets Discarded: 0 Errors: 0 FCS Errors: 0 Pause: 0 Runts: 0 Undersize: 0 Oversize: 0 Unicast Packets_64: 0 Multicast Packets_64: 0 Broadcast Packets_64: 0 Packets Discarded: 0 Errors: 0 Pause: 0 LACP Packets: 0 LACP Packets: 0 Marker Req Packets: 0 Marker Resp Packets: 0 Rx Rx Rx Tx Tx Tx BPDUs: Config BPDUs: TCN BPDUs: BPDUs: Config BPDUs: TCN BPDUs: 0 0 0 0 0 0 =============================================================================== Command completed successfully Error Codes Invalid LAG address Page 829 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats out-of-band-mgt (oobmgtport) Description Shows the statistics for the Ethernet Management interface. If the port is on the standby card of the system controller protection pair, then all counter values display "n/a". Reported values include: Port Oper Status: up, down, or unknown (unknown is used if the system does not support the capability to report the operating status while the card is the standby card in the protection pair.) Received Octets: Received octets Received Unicast packets: Received unicast packets Inbound packets discarded: Inbound packets discarded with no errors In Errors: Inbound packets with errors In Unknown Protocol: Inbound packets discarded because of unknown or unsupported protocol Transmitted Octets: Transmitted octets Transmitted Unicast packets:Transmitted Unicast packets Outbound packets discarded: Outbound packets discarded with no errors Out Errors: Outbound packets with errors Inbound Multicast packets: Inbound multicast packets Inbound Broadcast packets: Inbound Broadcast packets Outbound Multicast packets: Outbound Multicast packets Outbound Broadcast packets: Outbound Broadcast packets In Frame Align errors: Inbound Frames with alignment errors In FCS Errors: Inbound Frames with FCS errors Out Single Collision: Outbound frames prohibited by a single collision Out Mult Collision: Outbound frames prohibited by more than one collision Late Collisions: Late collisions detected Excessive Collisions: Outbound frames that fail due to collisions Internal MAC TX Errors: Internal MAC transmit errors Carrier Sense Errors: Number of times the carrier sense was lost In Oversize: Frames that exceed maximum frame size User Privilege Level: Operator Required Parameters: out-of-band-mgt oobmgtport Indicates the desired Out-of-Band chassis Ethernet management port. Valid values for the port are: - sys-a-enet-mgt1 - sys-b-enet-mgt1 - sw-a-enet-mgt1. Note that slot sw-a of the sw-a/b protection pair is used to specify the logical address regardless of whether sw-a or sw-b is active. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (System Controller port for sys-a, which is currently active) Page 830 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics AXS2200> show stats out-of-band-mgt sys-a-enet-mgt1 =============================================================================== Out-of-band Management Stats DATE: 07/31/2004 TIME: 07:14:40 =============================================================================== Port Oper Status: Received Octets: Received Unicast packets: Inbound packets discarded: In Errors: In Unknown Protocol: Transmitted Octets: Transmitted Unicast packets: Outbound packets discarded: Out Errors: Inbound Multicast packets: Inbound Broadcast packets: Outbound Multicast packets: Outbound Broadcast packets: In Frame Align errors: In FCS Errors: Out Single Collision: Out Mult Collision: Late Collisions: Excessive Collisions: Internal MAC TX Errors: Carrier Sense Errors: In Oversize: up 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 =============================================================================== Command completed successfully Example 2: (System Controller port for sys-b, which is currently standby) AXS2200> show stats out-of-band-mgt sys-b-enet-mgt1 =============================================================================== Out-of-band Management Stats DATE: 07/31/2004 TIME: 07:14:40 =============================================================================== Port Oper Status: Received Octets: Received Unicast packets: Inbound packets discarded: In Errors : In Unknown Protocol: Transmitted Octets: Transmitted Unicast packets: Outbound packets discarded: Out Errors: Inbound Multicast packets: Inbound Broadcast packets: Outbound Multicast packets: Outbound Broadcast packets: In Frame Align errors: In FCS Errors: Out Single Collision: Out Mult Collision: Late Collisions: Excessive Collisions: Internal MAC TX Errors: Carrier Sense Errors: In Oversize: up n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a =============================================================================== Command completed successfully Page 831 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Example 3: (Switch port for Video Return path traffic. Note that the data always is reported for the active switch card - either sw-a or sw-b) AXS2200> show stats out-of-band-mgt sw-a-enet-mgt1 =============================================================================== Out-of-band Management Stats DATE: 07/31/2004 TIME: 07:14:40 =============================================================================== Port Oper Status: Received Octets: Received Unicast packets: Inbound packets discarded: In Errors: In Unknown Protocol: Transmitted Octets: Transmitted Unicast packets: Outbound packets discarded: Out Errors: Inbound Multicast packets: Inbound Broadcast packets: Outbound Multicast packets: Outbound Broadcast packets: In Frame Align errors: In FCS Errors: Out Single Collision: Out Mult Collision: Late Collisions: Excessive Collisions: Internal MAC TX Errors: Carrier Sense Errors: In Oversize: up 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 =============================================================================== Command completed successfully Error Codes Invalid management port Page 832 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats pon (slot-port) Description Shows the statistics for the PON. For all Reported information includes: Address: slot-port Card Type: Type of PON card in the slot. Port Oper State: up, down or unknown The following are reported for all traffic supported on the PON port: Rx Packets_64 - Total Rx packets, inc. data and OAM Tx Packets_64 - Total Tx packets, inc. data and OAM Rx Unicast Packets - Total Rx unicast packets Rx Broadcast Packets - Total Rx broadcast packets Rx Multicast Packets - Total Rx multicast packets Rx Total Discarded Packets - Total Rx packets that were discarded Rx Total Discarded Out-of-Bound Packets - Total Rx packets that were discarded due to having a source IP address that was not in the range of the bound IP address for all bound VLANs carried by the GPON port. Rx Ploam msgs - Rx PON PLOAM messsages Tx Ploam msgs - Tx PON PLOAM messsages Rx Ploam Errored msgs- Errored PLOAM messsages received Rx OMCI msgs - Rx PON OMCI messsages Tx OMCI msgs - Tx PON OMCI messsages OMCI Errored msgs - Errored OMCI messsages Table - Per ONT: Channel, ONT Name, US BIP errors Note: For ONTs that are pre-provisioned, and do not have a serial number assigned, the each ONT counter will report 0. User Privilege Level: Operator Required Parameters: pon slot-port Identifies the PON by the OLT card port address. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats pon au-5-1 =============================================================================== PON Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== Address: au-5-1 Card Type: AGPOND Port Oper State: up ALL Traffic Page 833 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Rx Packets_64: 10000 Tx Packets_64: 10000 Rx Unicast Packets: 8000 Rx Broadcast Packets: 1000 Rx Multicast Packets: 1000 Rx Total Discarded Packets: 0 Rx Total Discarded Out-of-Bound Packets: PLOAM and OMCI Rx Ploam Msgs: 46 Tx Ploam Msgs: 45 Rx Ploam Errored Msgs: 0 Rx OMCI Msgs: 20 Tx OMCI Msgs: 19 OMCI Errored Msgs: 0 PON US BIP errors (per ONT): Channel ONT Name --------------------------1 100mainstreet 2 102mainstreet 3 104mainstreet 4 106mainstreet 5 108mainstreet 6 101mainstreet 7 103mainstreet 8 105mainstreet 9 107mainstreet 10 109mainstreet 0 US BIP errors -------------0 1 0 2 0 0 1 0 2 0 =============================================================================== Command completed successfully Error Codes PON port is secondary - use primary PON port address Invalid port Page 834 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats pondetail (pon-port | ont-address) Description This CLI command is used to display detailed statistics on the PON. The user may view statistics for the entire PON, or for a specific ONT. Each statistic is available in 3 intervals. These are 1 minute, 1 hour and 1 day. The supported set of statistics are: BIPS US BIPS DS BER Range Counts: Marginal Short Rerange Auto Range US CRC Errors Grants Missing Grants Violation Rogue Violation Drifts User Privilege Level: Operator Required Parameters: pondetail pon-port | ont-address AID for PON port or for an ONT Default Values Confirmation Message Command completed successfully Example(s) Example 1: (PON port) AXS2200> show stats pondetail au-5-1 =============================================================================== PON Detail Statistics Report DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Address: au-5-1 Interval: 1 Minute BIPS US: BIPS DS: Rogue Violation: BER: US CRC Errors: Grants Missing: Drifts: 0 0 0 0 0 0 0 Range Counts: Marginal: Rerange: Auto: Short: Grants Violation: 0 0 0 0 0 Interval: 1 Hour BIPS US: Page 835 0 Range Counts: AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics BIPS DS: Rogue Violation: BER: US CRC Errors: Grants Missing: Drifts: 0 0 0 0 0 0 Marginal: Rerange: Auto: Short: Grants Violation: 0 0 0 0 0 0 0 0 0 0 0 0 Range Counts: Marginal: Rerange: Auto: Short: Grants Violation: 0 0 0 0 0 Interval: 1 Day BIPS US: BIPS DS: Rogue Violation: BER: US CRC Errors: Grants Missing: Drifts: =============================================================================== Command completed successfully Example 2: (ONT) AXS2200> show stats pondetail au-5-1-32 =============================================================================== PON Detail Statistics Report DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Address: au-5-1-32 Interval: 1 Minute BIPS US: BIPS DS: Rogue Violation: BER: US CRC Errors: Grants Missing: Drifts: 0 0 0 0 0 0 0 Range Counts: Marginal: Rerange: Auto: Short: Grants Violation: 0 0 0 0 0 0 0 0 0 0 0 0 Range Counts: Marginal: Rerange: Auto: Short: Grants Violation: 0 0 0 0 0 0 0 0 0 0 0 0 Range Counts: Marginal: Rerange: Auto: Short: Grants Violation: 0 0 0 0 0 Interval: 1 Hour BIPS US: BIPS DS: Rogue Violation: BER: US CRC Errors: Grants Missing: Drifts: Interval: 1 Day BIPS US: BIPS DS: Rogue Violation: BER: US CRC Errors: Grants Missing: Drifts: =============================================================================== Command completed successfully Error Codes Invalid AID PON port is secondary - use primary PON port address Page 836 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats slot (slot) svid (svlanid) cvid (cvlanid) Description Displays the following counters for the VLAN on the OLT Slot. S-VID C-VID Slot Service State: Takes one of the following values: - empty = No card type is associated with this slot - init = Card is booting up and recovering configuration data - good = Card is operating properly and available to carry service - swtufail = Card is experiencing a software failure during turnup - swfail = Card is experiencing a software failure during normal operation - swmm = software mismatch or incompatibility with the version on the master system controller - hwfail = Card has suffered a hardware failure - comfail = Card is experiencing a communication failure - removed = Card has physically been removed from the shelf Tx Packets_64: transmitted packets (64 bit counter) Rx Packets_64: received packets (64 bit counter) Tx Octets_64: transmitted octets (64 bit counter) Rx Octets_64: received octets (64 bit counter) This command is not valid for slots that contain IP Voice Gateway cards or GPON cards. Note that this command does not apply to an svid/cvid combination that is used for a point to point connection. To obtain statistics for a point to point connection, consult "show stats conn". User Privilege Level: Operator Required Parameters: slot slot Indicates the OLT slot. svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Optional Parameters: cvid cvlanid Indicates the value for the C-VLAN ID. Valid values are {2-4085}. Default Values cvid is required for double tagged VLANs cvid is not applicable to single tagged or multicast VLANs. Confirmation Message Command completed successfully Example(s) Page 837 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Example 1: (single-tagged VLAN) AXS2200> show stats slot sw-a svid 1000 =============================================================================== Slot VLAN Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== S-VID: 1000 C-VID: Slot Service Status: good Tx Packets_64 556127 Rx Packets_64: 124555 Tx Octets_64: 9876630 Rx Octets_64: 7799776 =============================================================================== Command completed successfully Example 2: (double-tagged VLAN) AXS2200> show stats slot sw-a svid 16 cvid 20 =============================================================================== Slot VLAN Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== S-VID: 16 C-VID: 20 Slot Service Status: good Tx Packets_64 556127 Rx Packets_64: 124555 Tx Octets_64: 9876630 Rx Octets_64: 7799776 =============================================================================== Command completed successfully Example 3: (single-tagged VLAN on Gigabit Ethernet card) AXS2200> show stats slot au-11 svid 1000 =============================================================================== Slot VLAN Statistics DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== S-VID: 1000 C-VID: Slot Service Status: good Tx Packets_64 556127 Rx Packets_64: 124555 Tx Octets_64: 9876630 Rx Octets_64: 7799776 =============================================================================== Command completed successfully Error Codes VLAN - CVID not applicable for single-tagged VLANs CVLAN ID required for double-tagged VLANs Invalid cvid Invalid slot Invalid svid Page 838 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats svid (svlanid) Description Displays the statistics that are available for the S-VLAN. The following statistics are reported for each GPON port that carries VLAN members: - GPON Port Address - GPON Port Operating Status (up, down or unknown) - Receive Discarded Out of Bound packets for the S-VLAN. If the port operstatus is down or unknown, "-" is shown. GPON ports that do not carry a VLAN member for the S-VLAN will not be included in the report. User Privilege Level: Operator Required Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats svid 500 =============================================================================== VLAN Statistics DATE: 06/01/2010 TIME: 07:14:40 =============================================================================== S-VLAN: GPON Port AID --------au-5-1 au-5-2 au-6-4 au-12-1 500 Port OperStatus ---------up up down up Upstream Discarded Out-of-Bound Packets --------------------0 662 0 =============================================================================== Command completed successfully Error Codes VLAN - SVID not configured VLAN - IP Address is not bound Page 839 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats switch (sw-slot) slot (slot) Description Displays statistics from the switch fabric to the indicated linecard slot. Any slot can be used that carries a linecard (including Swtich cards with WAN uplinks). If a switch card is used for the slot attribute, the values provided are for the combined aggregate of the WAN uplinks for the card. The command does not permit sys-a or sys-b to be used for the slot. Address: sw-{a,b} Switch Fabric operating state: active, standby To/From the linecard slot: au-{1-18}, sw-{a,b} Linecard Type: AGPOND, AETHA, ASW200D, etc. Rx Unicast Packets_64: The number of unicast packets received by the switch fabric from the linecard slot Rx Broadcast Packets_64: The number of broadcast packets received by the switch fabric from the linecard slot Rx Multicast Packets_64: The number of multicast packets received by the switch fabric from the linecard slot Rx Packets discarded: The total number of packets received by the switch fabric from the linecard slot that were discarded Tx Unicast Packets_64: The number of unicast packets transmitted by the switch fabric to the linecard slot Tx Broadcast Packets_64: The number of broadcast packets transmitted by the switch fabric to the linecard slot Tx Multicast Packets_64: The number of multicast packets transmitted by the switch fabric to the linecard slot User Privilege Level: Operator Required Parameters: switch sw-slot Identifies the switch card. Sw-slot takes a value: - sw-a - sw-b slot slot Indicates the slot/card. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (stats between the switch fabric and slot AU-5) AXS2200> show stats switch sw-a slot au-5 =============================================================================== SWITCH FABRIC Slot Statistics DATE: 06/01/2010 TIME: 07:14:40 Page 840 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics =============================================================================== Address: sw-a Switch Fabric operating state: active To/From Linecard Slot: Linecard Type: AGPOND Rx Rx Rx Rx Tx Tx Tx Tx au-5 Unicast Packets_64: 0 Broadcast Packets_64: 0 Multicast Packets_64: 0 Packets discarded: 0 Unicast Packets_64: 0 Broadcast Packets_64: 0 Multicast Packets_64: 0 Packets discarded: 0 =============================================================================== Command completed successfully Error Codes Invalid slot switch not present Page 841 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats switch (sw-slot) svid (svlanid) Description Displays statistics from the switch fabric for the indicated VLAN. Address: sw-{a,b} Switch Fabric operating state: active, standby S-VLAN: The SVLAN ID that is being reported - Total Discarded Multicast Packets_64: The number of received multicast packets that were discarded by the switch fabric for the VLAN - Total Discarded Broadcast Packets_64: The number of received broadcast packets that were discarded by the switch fabric for the VLAN - Total Discarded Unicast Packets_64: The number of received unicast packets that were discarded by the switch fabric for the VLAN The command is valid only for S-VLANs that have bmc-rate set to a non-zero value. User Privilege Level: Operator Required Parameters: switch sw-slot Identifies the switch card. Sw-slot takes a value: - sw-a - sw-b svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (VLAN stats from the switch fabric) AXS2200> show stats switch sw-a svid 500 =============================================================================== SWITCH FABRIC VLAN Statistics DATE: 06/01/2010 TIME: 07:14:40 =============================================================================== Address: sw-a Switch Fabric operating state: active S-VLAN: 500 Discarded Multicast Packets_64: 0 Discarded Broadcast Packets_64: 0 Discarded Unicast Packets_64: 0 =============================================================================== Command completed successfully Page 842 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Error Codes VLAN not found switch not present VLAN does not have feature enabled Page 843 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats video-rpd (slot) Description Displays the statistics for the Video RPD functionality on the slot. Each OLT slot that is populated with a PON card simulates the functionality of a RPD2000 demodulator card. The mapping for AXS2200 is as follows: OLT Slot(s) RPD Demod Slot --------------------------------au-1, au-2 & au-3 1 au-4, au-5 & au-6 2 au-7, au-8 & au-9 3 au-10, au-11 & au-12 4 au-13, au-14 & au-15 5 au-16, au-17 & au-18 6 The mapping for AXS1800 is: OLT Slot(s) RPD Demod Slot --------------------------------au-1, au-2 & au-3 1 au-4, au-5 & au-6 2 au-7, au-8 & au-9 3 au-10, au-11 & au-12 4 au-13, au-14 5 The report header shows this information: PON Card Slot: repeats the slot for which the report was requested (au-1 through au-18 for AXS2200, au-1 through au-14 for AXS1800) Equivalent RPD Demod Slot: shows the RPD equivalent Demod slot (1-6 for AXS2200, 1-5 for AXS1800) Card Type: The type of PON card in the OLT chassis Slot Oper State: The operating state of the PON card (up, down) Reported statistics include: Total Rx Packets, Total Rx Good Packets, and Total Rx Missed Packets since last reset Min/Max stats since last reset: Rx pkts/sec, Power Level of received packets Avg stats for the last 15-minute interval: Rx pkts/sec, Power Level of received packets Stats for the last second: Rx Good pkts, Rx Missed pkts User Privilege Level: Operator Required Parameters: video-rpd slot Selects the slot that contains a PON card that is providing video RPD DEMOD card functionality. Default Values bin=current Confirmation Message Command completed successfully Example(s) Page 844 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Example 1: (Requested for slot au-5, and data returned for au-4, au-5 and au-6 collectively) AXS2200> show stats video-rpd au-5 =============================================================================== VIDEO-RPD Statistics DATE: 05/31/2004 TIME: 07:14:40 =============================================================================== PON Card Slot: au-4, au-5 and au-6 Equivalent RPD Demod Slot: 2 Card Type: AGPONC Slot Oper State: up Since Last Reset: Total Rx Rx Good Packets Packets ------------- ------------987370 987368 Min Pkts/Sec ---------0 Max Pkts/Sec ---------24 Rx Missed Packets ------------2 Min Pwr(dBmV) ---------11.8 Max Pwr(dBmV) ---------13.2 Average in Last 15-min Interval: Avg Avg Pkts/Sec Pwr(dBmV) ---------- ---------5 12.2 Stats in Last Second: Rx Good Rx Missed Pkts Pkts ----------- -----------7 0 =============================================================================== Command completed successfully Error Codes Video-RPD is not set Invalid card Page 845 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats acl gige (slot-port) Description Displays the statistics for each ACL rule that is applied to the port. The counter represents the number of packets that met the criteria defined in the ACL rule. - If the rule action is deny, then the counter reports the number of packets that were denied. - If the rule action is permit, then the counter reports the number of packets that were forwarded. To view the configuration settings for each rule, consult the "show acl-ip" or "show-acl-mac" reports. User Privilege Level: Operator Required Parameters: gige slot-port Identifies the GigE port. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (Port has both IP ACL and MAC ACLs applied) AXS2200> show stats acl gige sw-a-4 =============================================================================== ACL Statistics - OLT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: sw-a-4 Admin State: enable Oper State: up ACL-IP: alpha Rule Action ------ --------10 permit 20 permit 32 deny 99 deny Affected Packets ---------------665 8 88 9777200 ACL-MAC: beta Rule Action ------ --------10 permit 11 permit 30 deny 90 deny Affected Packets ---------------6 770 0 980 =============================================================================== Command completed successfully Example 2: Page 846 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics (Port has both IP ACL and MAC ACLs set to default) AXS2200> show stats acl gige sw-a-4 =============================================================================== ACL Statistics - OLT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: sw-a-4 Admin State: enable Oper State: up ACL-IP: qbdef Rule Action ------ --------none Affected Packets ---------------- ACL-MAC: qbdef Rule Action ------ --------none Affected Packets ---------------- =============================================================================== Command completed successfully Error Codes Invalid port Invalid, port belongs to LAGroup Page 847 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats acl lagroup (lagid) Description Displays the statistics for each ACL rule that is applied to the link aggregation group. The counter represents the number of packets that met the criteria defined in the ACL rule. - If the rule action is deny, then the counter reports the number of packets that were denied. - If the rule action is permit, then the counter reports the number of packets that were forwarded. To view the configuration settings for each rule, consult the "show acl-ip" or "show-acl-mac" reports. User Privilege Level: Operator Required Parameters: lagroup lagid Indicates the particular link aggregation group (lag-{1-128}. Example: lag-100 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (Link Aggregation Group has both IP ACL and MAC ACLs applied) AXS2200> show stats acl lagroup lag-10 =============================================================================== ACL Statistics - Link Aggregation Group DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: lag-10 Admin State: enable Oper State: up ACL-IP: alpha Rule Action ------ --------10 permit 20 permit 32 deny 99 deny Affected Packets ---------------665 8 88 9777200 ACL-MAC: beta Rule Action ------ --------10 permit 11 permit 30 deny 90 deny Affected Packets ---------------6 770 0 980 =============================================================================== Command completed successfully Example 2: Page 848 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics (LAG has both IP ACL and MAC ACLs set to default) AXS2200> show stats acl lagroup lag-10 =============================================================================== ACL Statistics - Link Aggregation Group DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: lag-10 Admin State: enable Oper State: up ACL-IP: qbdef Rule Action ------ --------none Affected Packets ---------------- ACL-MAC: qbdef Rule Action ------ --------none Affected Packets ---------------- =============================================================================== Command completed successfully Error Codes Link Aggregation Group has no GigE ports assigned as members Link Aggregation group not defined Page 849 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats acl pon (slot-port) Description Displays the statistics for each ACL rule that is applied to the port. The counter represents the number of packets that met the criteria defined in the ACL rule. - If the rule action is deny, then the counter reports the number of packets that were denied. - If the rule action is permit, then the counter reports the number of packets that were forwarded. To view the configuration settings for each rule, consult the "show acl-ip" or "show-acl-mac" reports. User Privilege Level: Operator Required Parameters: pon slot-port Identifies the PON by the OLT card port address. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (Port has both IP ACL and MAC ACLs applied) AXS2200> show stats acl pon au-5-1 =============================================================================== ACL Statistics - OLT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: au-5-1 Admin State: enable Oper State: up ACL-IP: alpha Rule Action ------ --------10 permit 20 permit 32 deny 99 deny Affected Packets ---------------665 8 88 9777200 ACL-MAC: beta Rule Action ------ --------10 permit 11 permit 30 deny 90 deny Affected Packets ---------------6 770 0 980 =============================================================================== Command completed successfully Example 2: Page 850 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics (Port has both IP ACL and MAC ACLs set to default) AXS2200> show stats acl pon au-5-1 =============================================================================== ACL Statistics - OLT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: au-5-1 Admin State: enable Oper State: up ACL-IP: qbdef Rule Action ------ --------none Affected Packets ---------------- ACL-MAC: qbdef Rule Action ------ --------none Affected Packets ---------------- =============================================================================== Command completed successfully Error Codes Invalid port PON port is secondary - use primary PON port address Page 851 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats acl ont pon (ontponaddress) Description Displays the statistics for each ACL rule that is applied to the port. The counter represents the number of packets that met the criteria defined in the ACL rule. - If the rule action is deny, then the counter reports the number of packets that were denied. - If the rule action is permit, then the counter reports the number of packets that were forwarded. To view the configuration settings for each rule, consult the "show acl-ip" or "show-acl-mac" reports. User Privilege Level: Operator Required Parameters: pon ontponaddress Specifies the ONT PON port address. It takes the following format:, - oltslot-port-channel-pon-index (e.g. au-3-4-16-pon-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (Port has both IP ACL and MAC ACLs applied) AXS2200> show stats acl ont pon au-5-1-1-pon-1 =============================================================================== ACL Statistics - ONT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: au-5-1-1-pon-1 Oper State: up ACL-IP: alpha Rule Action ------ --------10 permit 20 permit 32 deny 99 deny Affected Packets ---------------665 8 88 9777200 ACL-MAC: beta Rule Action ------ --------10 permit 11 permit Affected Packets ---------------6 770 Page 852 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 30 90 Statistics deny deny 0 980 =============================================================================== Command completed successfully Example 2: (Port has both IP ACL and MAC ACLs set to default) AXS2200> show stats acl ont pon au-5-1-1-pon-1 =============================================================================== ACL Statistics - ONT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: au-5-1-1-pon-1 Oper State: up ACL-IP: qbdef Rule Action ------ --------none Affected Packets ---------------- ACL-MAC: qbdef Rule Action ------ --------none Affected Packets ---------------- =============================================================================== Command completed successfully Error Codes ONT does not exist Invalid equipment state for request Invalid for pre-provisioned ONTs without serial numbers ONT does not support this functionality Page 853 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats acl ont port (ontdataaclport) Description Displays the statistics for each ACL rule that is applied to the ONT data port. The counter represents the number of packets that met the criteria defined in the ACL rule. - If the rule action is deny, then the counter reports the number of packets that were denied. - If the rule action is permit, then the counter reports the number of packets that were forwarded. To view the configuration settings for each rule, consult the "show acl-ip" or "show-acl-mac" reports. User Privilege Level: Operator Required Parameters: port ontdataaclport Indicates the ONT address for the data ports that support ACLs. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - porttype (enet, hcna, vdsl2) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (Port has both IP ACL and MAC ACLs applied) AXS2200> show stats acl ont pon au-5-1-1-enet-1 =============================================================================== ACL Statistics - ONT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: au-5-1-1-enet-1 Admin State: enable Oper State: up ACL-IP: alpha Rule Action ------ --------10 permit 20 permit 32 deny Page 854 Affected Packets ---------------665 8 88 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA 99 Statistics deny ACL-MAC: beta Rule Action ------ --------10 permit 11 permit 30 deny 90 deny 9777200 Affected Packets ---------------6 770 0 980 =============================================================================== Command completed successfully Example 2: (Port has both IP ACL and MAC ACLs set to default) AXS2200> show stats acl ont pon au-5-1-1-vdsl-1 =============================================================================== ACL Statistics - ONT Port DATE: 07/18/2010 TIME: 07:14:40 =============================================================================== AID: au-5-1-1-vdsl-1 Admin State: enable Oper State: up ACL-IP: qbdef Rule Action ------ --------none Affected Packets ---------------- ACL-MAC: qbdef Rule Action ------ --------none Affected Packets ---------------- =============================================================================== Command completed successfully Error Codes ONT does not exist Invalid equipment state for request Invalid for pre-provisioned ONTs without serial numbers ONT does not support this functionality Page 855 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats in-band-mgt Description Shows the statistics for the In-Band management Interface at the Syscon. Reported values include for the IP interface: Rx Tx Rx Tx Packets: Packets: Discard: Discard: Total number of Received packets Total number of Transmitted packets Inbound packets discarded Outbound packets discarded User Privilege Level: Operator Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats in-band-mgt =============================================================================== In-Band-Mgt Statistics DATE: 07/31/2010 TIME: 07:14:40 =============================================================================== Rx Tx Rx Tx Packets: Packets: Discard: Discard: 124433 4555 12 7 =============================================================================== Command completed successfully Error Codes In-band-mgt IP address is not configured Page 856 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats ont dot1x (ontdataaddress) Description The Report will display authentication stats for all EAP sessions on a data port of an ONT (ENET, MOCA, HCNA, VDSL), with each session identified by the Supplicant's MAC address. Note: As seen from the Authenticator (OLT) perspective. The follwing strings will be displaed for the RADIUS Client {RADIUS Terminate Cause} "Supplicant Logoff" "Port Failure" "Supplicant Restart" "Re-authentication Failed" "Auth Control Force Unauthorized" "Port Reinitialized" "Port Admin Disabled" "Not Yet Terminated" User Privilege Level: Admin Required Parameters: ontdataaddress Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - porttype (enet, moca, vdsl2) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: For an ONT type show a specific ENET port's authentication stats AXS2200> show stats ont dot1x au-11-2-1-enet-1 =============================================================================== 802-1x ONT Port (Authenticator) Statistics DATE: 01/11/2008 TIME: 16:57:15 =============================================================================== ONT AID: au-11-2-1-enet-1 Total Supplicants: 2 Supplicant MAC Address: 00-10-A4-23-19-C0 State: authed Authenticator Page 857 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Rx Rx Rx Rx Rx Rx Rx Statistics EAP Frames: 0 EAP Start Frames: 0 EAP Logoff Frames: 0 EAP Resp/ID Frames: 0 EAP Resp Frames: 0 Invalid EAP Frames: 0 EAP Len Error Frames: 0 Tx EAP Frames: 0 Tx EAP Req/Id Frames: Tx EAP Req Frames: 0 0 Log-offs while connected: 0 Timeouts while authenticating: 0 Success while authenticating: 0 Failures while authenticating: 0 EAP starts while authenticating: 0 EAP logoffs while authenticated: 0 Radius Client Backend responses : 0 Backend challenges : 0 Backend auth successes : 0 Supplicant MAC Address: 00-10-A4-23-19-C1 State: authed Authenticator Rx Rx Rx Rx Rx Rx Rx EAP Frames: 0 EAP Start Frames: 0 EAP Logoff Frames: 0 EAP Resp/ID Frames: 0 EAP Resp Frames: 0 Invalid EAP Frames: 0 EAP Len Error Frames: 0 Tx EAP Frames: 0 Tx EAP Req/Id Frames: Tx EAP Req Frames: 0 0 Log-offs while connected: 0 Timeouts while authenticating: 0 Success while authenticating: 0 Failures while authenticating: 0 EAP starts while authenticating: 0 EAP logoffs while authenticated: 0 Radius Client Backend responses : 0 Backend challenges : 0 Backend auth successes : 0 =============================================================================== Command completed successfully Example 2: For an ONT type show a specific VDSL-2 port's authentication stats AXS2200> show stats ont dot1x au-5-2-30-vdsl-2-11 =============================================================================== 802.1x ONT Port (Authenticator) Statistics DATE: 09/01/2007 TIME: 07:14:40 =============================================================================== ONT AID: au-11-2-1-enet-1 Page 858 Total Supplicants: 1 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Supplicant MAC Address: 00-10-A4-23-19-C0 State: authed Authenticator Rx Rx Rx Rx Rx Rx Rx EAP Frames: 0 EAP Start Frames: 0 EAP Logoff Frames: 0 EAP Resp/ID Frames: 0 EAP Resp Frames: 0 Invalid EAP Frames: 0 EAP Len Error Frames: 0 Tx EAP Frames: 0 Tx EAP Req/Id Frames: Tx EAP Req Frames: 0 0 Log-offs while connected: 23 Timeouts while authenticating: 0 Success while authenticating: 24 Failures while authenticating: 29 EAP starts while authenticating: 12 EAP logoffs while authenticated: 2 Radius Client Backend responses : 20 Backend challenges : 20 Backend auth successes : 10 =============================================================================== Command completed successfully Example 3: For an ONT type show a specific MOCA port's authentication stats AXS2200> show stats ont dot1x au-5-2-17-moca-1 =============================================================================== 802.1x ONT Port (Authenticator) Statistics DATE: 09/01/2007 TIME: 07:14:40 =============================================================================== ONT AID: au-11-2-1-enet-1 Total Supplicants: 1 Supplicant MAC Address: 00-10-A4-23-19-C0 State: authed Authenticator Rx Rx Rx Rx Rx Rx Rx EAP Frames: 0 EAP Start Frames: 0 EAP Logoff Frames: 0 EAP Resp/ID Frames: 0 EAP Resp Frames: 0 Invalid EAP Frames: 0 EAP Len Error Frames: 0 Tx EAP Frames: 0 Tx EAP Req/Id Frames: Tx EAP Req Frames: 0 0 Log-offs while connected: 23 Timeouts while authenticating: 0 Success while authenticating: 24 Failures while authenticating: 29 EAP starts while authenticating: 12 EAP logoffs while authenticated: 2 Radius Client Backend responses : 20 Backend challenges : 20 Backend auth successes : 10 Page 859 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics =============================================================================== Command completed successfully Example 4: For an ONT type show a specific HCNA port's authentication stats AXS2200> show stats ont dot1x au-5-2-17-hcna-1 =============================================================================== 802.1x ONT Port (Authenticator) Statistics DATE: 09/01/2007 TIME: 07:14:40 =============================================================================== ONT AID: au-11-2-1-enet-1 Total Supplicants: 1 Supplicant MAC Address: 00-10-A4-23-19-C0 State: authed Authenticator Rx Rx Rx Rx Rx Rx Rx EAP Frames: 0 EAP Start Frames: 0 EAP Logoff Frames: 0 EAP Resp/ID Frames: 0 EAP Resp Frames: 0 Invalid EAP Frames: 0 EAP Len Error Frames: 0 Tx EAP Frames: 0 Tx EAP Req/Id Frames: Tx EAP Req Frames: 0 0 Log-offs while connected: 23 Timeouts while authenticating: 0 Success while authenticating: 24 Failures while authenticating: 29 EAP starts while authenticating: 12 EAP logoffs while authenticated: 2 Radius Client Backend responses : 20 Backend challenges : 20 Backend auth successes : 10 =============================================================================== Command completed successfully Error Codes 802.1x in not enabled ONT Invalid port Invalid ONT equipment state for request Page 860 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics show stats ont flapping-alarms (ontaddress) Description Displays first detected flapping alarm time, the last flapping alarm detected time and total number of suppressed alarms in a summary format. Note 1: The counters are reset under following conditions: - When the PON card resets - When monitoring of the flapping alarms state changes to active from inactive state. Note 2: If no alarms are detected for specific AID, corresponding row entry is left out of the report. Note 3: The report header shows. - ONT Name - ONT Serial Number - ONT Address (AID) - OLT PON Card Type - ONT current operating status - Current Flapping Alarms State User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values Confirmation Message Command completed successfully Example(s) Example 1: (MDU-GET) AXS2200> show stats ont flapping-alarms au-5-1-1 =============================================================================== ONT Flapping Alarms REPORT DATE: 10/17/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Address (AID): au-5-1-1 OLT PON Card: AGPONC ONT Operating Status: active Flapping Alarms State: active Page 861 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Port AID -------enet-1 enet-12 video-1 Statistics Total Suppressed ---------------20 3 1 First Detected ------------------10/10/2007 15:30.20 10/10/2007 15:30.20 10/11/2007 15:30.20 Last Detected ------------------10/16/2007 15:30.32 10/16/2007 15:30.21 10/12/2007 15:30.10 Example 2: (MDU-GVT) AXS2200> show stats ont flapping-alarms au-6-1-1 =============================================================================== ONT Flapping Alarms REPORT DATE: 10/17/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Address (AID): au-6-1-1 OLT PON Card: AGPONC ONT Operating Status: active Flapping Alarms State: active Port AID -------vdsl2-1 vdsl2-11 Total Suppressed ---------------8 4 First Detected ------------------10/10/2007 15:30.20 10/10/2007 15:30.20 Last Detected ------------------10/16/2007 15:30.20 10/16/2007 15:30.20 Example 3: (SFU Non-Moca) AXS2200> show stats ont flapping-alarms au-8-1-1 =============================================================================== ONT Flapping Alarms REPORT DATE: 10/17/2007 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Address (AID): au-8-1-1 OLT PON Card: AGPONC ONT Operating Status: active Flapping Alarms State: active Port AID -------enet-1 Total Suppressed ---------------1 First Detected ------------------10/10/2007 15:30.20 Last Detected ------------------10/12/2007 15:30.20 =============================================================================== Command completed successfully Example 4: (SFU non-MoCA No alarms to show as none detected) AXS2200> show stats ont flapping-alarms au-8-1-1 No flapping alarms available. Page 862 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics Error Codes Invalid ONT No flapping alarms available Invalid for pre-provisioned ONTs without serial numbers Invalid ONT equipment state for request Page 863 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 864 Statistics AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Voice Gateway Statistics - Voice Gateway show stats ig (slot-gr303-index) channel ({tmc-pri | tmc-sec | eoc-pri | eoc-sec}) Description This report shows the statistics for the EOC or TMC channel. Reported information includes: Tx Layer 2 frames Rx Layer 2 frames Rx Layer 2 errored frames Tx Info frames Rx Info frames Tx UI data frames Rx UI data frames Tx Layer 3 frames Rx Layer 3 frames User Privilege Level: Operator Required Parameters: {tmc-pri | tmc-sec | eoc-pri | eoc-sec} channel Indicates the TMC or EOC for the primary (pri) or secondary (sec) channel. slot-gr303-index ig Indicates the specific GR-303 interface group. - slot is the slot where the Voice Gateway card is inserted. - gr303 is used to indicate it is a gr303 interface group. - index indicates which interface group, specifically, and takes a value between 1-8 For example: au-1-gr303-1 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats ig au-1-gr303-1 channel tmc-pri =============================================================================== GR303 Interface Group Channel Statistics DATE: 07/31/2004 TIME: 12:14:40 =============================================================================== Interface Group: au-1-gr303-1 Channel: tmc-pri IG Admin Status: enable IG Oper Status: up Tx Layer 2 frames: 87 Rx Layer 2 frames: 87 Rx Layer 2 errored frames: Page 865 0 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tx Rx Tx Rx Tx Rx Statistics - Voice Gateway Info frames: 97 Info frames: 54 UI data frames: 827 UI data frames: 546 Layer 3 frames: 65 Layer 3 frames: 56 =============================================================================== Command completed successfully Error Codes Voice gateway not equipped DS1 Secondary not provisioned Interface Group is in wrong state for this command Interface group not created Invalid for a protection slot of a 1+1 protected group - select working slot Valid only for GR-303 Interface Groups Switching is inhibited Page 866 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Voice Gateway show stats vg slot (slot) Description Displays the statistics for the Voice Gateway card. RTP Counts are 32-bit counters. Reported information includes: RTP Statistics: RTP connections open: Number of UDP RTP connections currently open: 0-1344 Jitter monitors open: Rx UDP RTP Packet Delay Variation Monitors Open. PCM channels open: UDP RTP PCM Channels Open. PCM buffers open: UDP Short Count: The number of times a packet was parsed and a UDP header was found with a length less than 8. Protocol Delete Count: The number of times a packet was parsed and one of it’s header caused the packet to be deleted. Protocol Non-UDP Count: The number of times a packet was parsed and one of it’s header caused the packet to be treated as non-UDP. IPv4 IHL Short Count: The number of times a packet was parsed and the 4-bit IHL (Internet Header Length) field of the IPv4 header was less than 5. IPv4 IHL Long Count: The number of times a packet was parsed and the IHL field of the IPv4 header was longer than the remaining packet length. IPv4 Checksum Error Count: The number of times a packet was parsed and the IPv4 header checksum was invalid. Rx Ethernet Short Pkt Count: The number of received packets containing less than 64 bytes. Rx Ethernet Long Pkt Count: The number of received packets containing more than 1500 bytes of payload. Rx Ethernet Crc Error Count: The number of received packets with an invalid CRC field. Bad Etherlength Count: The number of times an etherlength was received whose value was greater than the number of bytes remaining in the packet. Echo Cancellation Statistics: Number of channels open: 0-1344 H100 Out of Sync Error Count H100 Clk A Bad Error Count H100 Frame A Bad Error Count PLL Jitter Error Count User Privilege Level: Operator Required Parameters: vg slot slot Indicates the slot/card. Default Values none Page 867 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Voice Gateway Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show stats vg slot au-1 =============================================================================== Voice Gateway Statistics DATE: 07/31/2007 TIME: 07:14:40 =============================================================================== Slot: au-1 RTP Statistics: RTP connections open: 135 Jitter monitors open: 135 PCM channels open: 135 PCM buffers open: 135 UDP Short Count: 2136 Protocol Delete Count: 0 Protocol Non-UDP Count: 0 IPv4 IHL Short Count: 21 IPv4 IHL Long Count: 8 IPv4 Checksum Error Count: 74 Rx Ethernet Short Pkt Count: 9 Rx Ethernet Long Pkt Count: 5 Rx Ethernet Crc Error Count: 2 Bad Etherlength Count: 0 Echo Cancellation Statistics: Number of channels open: 135 H100 Out of Sync Error Count: 0 H100 Clk A Bad Error Count: 0 H100 Frame A Bad Error Count: 0 PLL Jitter Error Count: 0 =============================================================================== Command completed successfully Error Codes Invalid for a protection slot of a 1+1 protected group - select working slot Invalid slot Voice gateway not equipped Page 868 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Voice Gateway show stats vg-voice ({crv | timeslot}) Description Displays the statistics for the selected pots channel on the Voice Gateway card. Reported information includes: Connection Name: user-provisioned connection name. RTP Statistics Rx Packets Tx Packets Tx Octets Rx Octets Last ABCD Event Received: Depends on the type of signal code being used. Codes received at the Voice Gateway card are the IDT--> RDT codes, and can be one of the following: ringing DS0 AIS RLCF (Reverse Loop Current Feed) LCF ( Loop Current Feed) DS0 Yellow LCFO (Loop Current Feed Open) Reserved SF-ESF (0x8, 0x13, 0x07) Last ABCD Event Transmitted: Depends on the type of signal code being used. Codes transmissed by the Voice Gateway card are the RDT --> IDT codes, and can be one of the following: DS0 AIS LO (Loop Open) DS0 Yellow LC (Loop Closed) Reserved SF-ESF (0x8, 0x13, 0x07) Rx Pkt Loss Count: Counts the number of packets lost. Rx Pkt Mis-insertion Count: Counts the number of packets mis-inserted. Rx Pkt Length Err Count: Counts the number of packets discarded because the RTP padding indicated the absence of valid payload. Rx RTP Version Err Count: Counts the number of packets received with a mismatching RTP version field. Rx UDP Checksum Err Count: Counts the number of packets received with an invalid UDP checksum. PCM Statistics (only available when channel is active): PCM Received Packet Count PCM Received Byte Count Underrun Slip Count Overrun Slip Count Samples Lost Count Invalid Packet Length Error Count Short Pkt Length Err Count: The number of discarded packets because the number of payload bytes represented 0 frames. Long Pkt Length Err Count:The number of discarded packets because the number of payload bytes was longer than the maximum expected packet length. Packet Delay Variation (only available when channel is active): Monitored PDV Total Slip Offset Echo Cancellation Statistics (only available when channel is active): Page 869 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Voice Gateway Echo Canceller Status: Enabled/Disabled Num Echo Path Changes Count Current Echo Delay Max Echo Delay RIN Level: -127 - 127 dBm0 SIN Level: -127 - 127 dBm0 Comfort Noise Level: -127 - 127 dBm0 For counters that require an active channel: If the channel is inactive, these counters display "n/a". This command is not allowed when the potschannel admin state is set to disable or the connection admin state is inactive. User Privilege Level: Operator Required Parameters: vg-voice {crv | timeslot} Specifies the CRV or a T0 Timeslot on the Voice Gateway card. crv takes the format of slot-igtype-index-crv, where: - slot is the slot where the Voice Gateway card is inserted - igtype is gr303 or tr08 - index indicates which interface group and takes a value from 1- 8 for GR-303, or 1-14 for TR-08 interface groups. - crv indicates the call reference value and depends on the type of interface used: - tr08: 1-96 - gr303: 1- maxcrv (default maxcrv is 2048) Note: maxcrv is configurable by GR-303 interface group. For example: au-1-gr303-7-1 and au-1-tr08-1-1 timeslot is the T1CAS timeslot on the VG card which takes the format slot-port-timeslot where: - slot is one of the following au-{1,3} - port is a value from {1-56} - timeslot is a value from {1-24} For example: au-1-1-21 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (GR-303 IG CRV) AXS2200> show stats vg-voice au-1-gr303-1-100 =============================================================================== VG-Voice Channel Statistics DATE: 07/31/2007 TIME: 07:14:40 =============================================================================== Connection Name: 10mainstreet IG CRV/Timeslot: au-1-gr303-1-100 Page 870 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Voice Gateway RTP Statistics: Rx Packets: 1000 Rx Octets: 5002 Last ABCD Event Received: LCF Rx Pkt Loss Count: 2 Rx Pkt Length Err Count: 0 Rx UDP Checksum Err Count: 1 Tx Packets: 1001 Tx Octets: 5000 Last ABCD Event Transmitted: LO Rx Pkt Mis-insertion Count: 0 Rx RTP Version Err Count: 0 PCM Statistics: PCM Rx Packet Count: 79 Underrun Slip Count: 0 Samples Lost Count: 0 Short Pkt Length Err Count: 23 PCM Rx Byte Count: 318 Overrun Slip Count: 0 Inv Packet Len Err Count: 0 Long Pkt Length Err Count: 0 Packet Delay Variation Statistics: Monitored PDV: 0 Total Slip Offset: 0 Echo Cancellation Statistics: Echo Canceller Status: Enabled Echo Path Changes Count: 98 Current Echo Delay: 79 Max Echo Delay: 103 RIN Level: -12 dBm0 SIN Level: -9 dBm0 Comfort Noise Level: -23 dBm0 =============================================================================== Command completed successfully Example 2: (T1CAS Timeslot, DS1 physical interface) AXS2200> show stats vg-voice au-1-28-1 aal2cid =============================================================================== VG-Voice Channel Statistics DATE: 07/31/2007 TIME: 07:14:40 =============================================================================== Connection Name: 10mainstreet IG CRV/Timeslot: au-1-28-1 RTP Statistics: Rx Packets: 1000 Rx Octets: 5002 Last ABCD Event Received: LCF Rx Pkt Loss Count: 2 Rx Pkt Length Err Count: 0 Rx UDP Checksum Err Count: 1 Tx Packets: 1001 Tx Octets: 5000 Last ABCD Event Transmitted: LO Rx Pkt Mis-insertion Count: 0 Rx RTP Version Err Count: 0 PCM Statistics: PCM Rx Packet Count: 79 Underrun Slip Count: 0 Samples Lost Count: 0 Short Pkt Length Err Count: 23 PCM Rx Byte Count: 318 Overrun Slip Count: 0 Inv Packet Len Err Count: 0 Long Pkt Length Err Count: 0 Packet Delay Variation Statistics: Monitored PDV: 0 Total Slip Offset: Echo Cancellation Statistics: Echo Canceller Status: Enabled Current Echo Delay: 79 RIN Level: -12 dBm0 Comfort Noise Level: -23 dBm0 Echo Path Changes Count: 98 Max Echo Delay: 103 SIN Level: -9 dBm0 0 =============================================================================== Command completed successfully Example 3: (Call not in progress/channel not active) AXS2200> show stats vg-voice au-1-gr303-1-100 =============================================================================== VG-Voice Channel Statistics DATE: 07/31/2007 TIME: 07:14:40 Page 871 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Statistics - Voice Gateway =============================================================================== Connection Name: 10mainstreet IG CRV/Timeslot: au-1-gr303-1-100 RTP Statistics: Rx Packets: 1000 Rx Octets: 5002 Last ABCD Event Received: LCF Rx Pkt Loss Count: 2 Rx Pkt Length Err Count: 0 Rx UDP Checksum Err Count: 1 Tx Packets: 1001 Tx Octets: 5000 Last ABCD Event Transmitted: LO Rx Pkt Mis-insertion Count: 0 Rx RTP Version Err Count: 0 PCM Statistics: PCM Rx Packet Count: n/a Underrun Slip Count: n/a Samples Lost Count: n/a Short Pkt Length Err Count: 23 PCM Rx Byte Count: n/a Overrun Slip Count: n/a Inv Packet Len Err Count: n/a Long Pkt Length Err Count: 0 Packet Delay Variation Statistics: Monitored PDV: n/a Total Slip Offset: Echo Cancellation Statistics: Echo Canceller Status: n/a Current Echo Delay: n/a RIN Level: n/a Comfort Noise Level: n/a Echo Path Changes Count: n/a Max Echo Delay: n/a SIN Level: n/a n/a =============================================================================== Command completed successfully Error Codes Voice gateway not equipped Invalid for a protection slot of a 1+1 protected group - select working slot Invalid t1cas timeslot Invalid crv Invalid connection state for request Invalid potschannel state Invalid Interface group Page 872 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 873 Statistics - Voice Gateway AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests Tests show testresult pon (slot-port) Description Displays the results of the test pon operation for the specified PON port. Reported information includes: AID/SN: The AID of the PON that was tested. IF the AID is not available, then the FSAN serial number is shown. Timestamp: The time the PON test was last performed. Idle PON Test: Pass or Fail. If an ONT erroneously transmits during the idle test, the rest of the tests are also likely to fail. Unresolved Event Count: The number of unresolved event counts since the last PON card reset. For each ONT on the PON, the following is shown: - ONT AID: The AID of the ONT. If an AID isn't assigned, then the FSAN serial number is shown. - Result: Pass or Fail, or not run. If failed, the ONT may be transmitting on the wrong timeslot. If not run, that means the ONT is not currently ranged. Warning History For each ONT that has exhibited an abnormal PON event the following is shown: - ONT AID: The AID of the ONT. If an AID isn't assigned, then the FSAN serial number is shown. If The AID or Serial number can't be determined, then the unresolved counter is incremented. - Event Count: The number of times that the ONT has exhibited a faulty event on the PON - First Event Timestamp: The first time the ONT exhibited a faulty event on The PON (since the PON card has been reset). - Last Event Timestamp; The last time the ONT exhibited a faulty event User Privilege Level: Operator Required Parameters: pon slot-port Identifies the PON by the OLT card port address. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show testresult pon au-5-1 =============================================================================== PON TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== AID: au-5-1 Timestamp: 5/19/05 12:02:00 Page 874 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests Idle PON Test: Pass Unresolved Event Count: 3 ONT AID/SN --------------au-5-1-1 au-5-1-2 au-5-1-10 au-5-1-13 MRCC1234ABCD Result --------Pass Pass Pass Pass Pass WARNING HISTORY ONT AID/SN --------------au-5-1-3 au-5-1-4 Event Count ----------1 2 First Event Timestamp --------------------5/10/05 12:54:22 5/10/05 02:02:02 Last Event Timestamp -------------------5/19/05 6:54:22 5/19/05 6:10:01 =============================================================================== Command completed successfully Example 2: (test result for when there are no ONTs or only pre-provisioned ONTs on the PON and the idle test passes) =============================================================================== PON TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== AID: au-5-1 Timestamp: 5/19/05 12:02:00 Idle PON Test: Pass Unresolved Event Count: 0 ONT AID/SN --------------- Result --------- WARNING HISTORY ONT AID/SN --------------- Event Count ----------- First Event Timestamp --------------------- Last Event Timestamp -------------------- =============================================================================== Command completed successfully Example3: (test result for no ONTs or only pre-provisioned ONTs on the PON and the idle test fails) =============================================================================== PON TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== AID: au-5-1 Timestamp: 5/19/05 12:02:00 Idle PON Test: Fail Unresolved Event Count: 0 ONT AID/SN --------------- Result --------- WARNING HISTORY ONT AID/SN --------------- Event Count ----------- First Event Timestamp --------------------- Last Event Timestamp -------------------- =============================================================================== Command completed successfully Page 875 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests Example 4: (test result for when all ONTs on the PON are in OOC/estop/fault) =============================================================================== PON TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== AID: au-5-1 Timestamp: 5/19/05 12:02:00 Idle PON Test: Pass Unresolved Event Count: 3 ONT AID/SN --------------au-5-1-1 au-5-1-2 au-5-1-10 au-5-1-13 MRCC1234ABCD Result --------not run not run not run not run not run WARNING HISTORY ONT AID/SN --------------au-5-1-3 au-5-1-4 Event Count ----------1 2 First Event Timestamp --------------------5/10/05 12:54:22 5/10/05 02:02:02 Last Event Timestamp -------------------5/19/05 6:54:22 5/19/05 6:10:01 =============================================================================== Command completed successfully Example 5: (test result for when some ONTs on the PON are in OOC/estop/fault) =============================================================================== PON TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== AID: au-5-1 Timestamp: 5/19/05 12:02:00 Idle PON Test: Pass Unresolved Event Count: 3 ONT AID/SN --------------au-5-1-1 au-5-1-2 au-5-1-10 au-5-1-13 MRCC1234ABCD Result --------not run Pass not run Pass not run WARNING HISTORY ONT AID/SN --------------au-5-1-3 au-5-1-4 Event Count ----------1 2 First Event Timestamp --------------------5/10/05 12:54:22 5/10/05 02:02:02 Last Event Timestamp -------------------5/19/05 6:54:22 5/19/05 6:10:01 =============================================================================== Command completed successfully Example 6: (test result for when some ONTs fail the PON test) =============================================================================== PON TEST RESULT REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== Page 876 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests AID: au-5-1 Timestamp: 5/19/05 12:02:00 Idle PON Test: Pass Unresolved Event Count: 4 ONT AID/SN --------------au-5-1-1 au-5-1-2 au-5-1-10 au-5-1-13 MRCC1234ABCD Result --------not run Pass Pass Fail not run WARNING HISTORY ONT AID/SN --------------au-5-1-3 au-5-1-4 Event Count ----------1 2 First Event Timestamp --------------------5/10/05 12:54:22 5/10/05 02:02:02 Last Event Timestamp -------------------5/19/05 6:54:22 5/19/05 6:10:01 =============================================================================== Command completed successfully Error Codes Invalid port state Invalid port Test results are not available SFP is removed PON port is secondary - use primary PON port address Page 877 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests test avalarm Description This test will simulate the activation of various alarms in the system. It will cycle through the CO alarms in this order for a total of one cycle: All office alarms activated (CR, MJ, MN) All office alarms deactivated (CR, MJ and MN) One at a time for one cycle: CR audible and CR visual pair MJ audible and MJ visual pair MN audible and MN visual pair All office alarms activated (CR, MJ and MN) All office alarms deactivated (CR, MJ and MN) Resume alarms state prior to test If the ACO button is pressed during the test cycle, it will suppress ONLY the CO audible alarm for the interval the alarm is being tested. Once that point shuts off (i.e. is no longer activated for the test), the ACO is cleared. NOTE: When an office alarm VISUAL indication is activated, the corresponding CR/MJ/MN LED on the system controller will also illuminate. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> test avalarm Command completed successfully Error Codes Page 878 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests test leds ({ slot | all}) Description Tests the LEDs of the card in the specified slot, or all LEDs of the cards in the OLT system. This test will flash the appropriate LEDs for 3 cycles. When the CR LED on the system controller is lighted, the CO office alarms for CR audible and visual shall also light. If the ACO button is pressed during the cycle, it will suppress ONLY the CO audible alarm for the interval for the LED on the system controller to be lighted. Once the LED shuts off (i.e. is no longer lighted), the ACO is cleared. This command is not service affecting. NOTE the intervals are: · 'on' and 'off' interval for all slots = 250 msec · 'on' and 'off' interval for a single slot = 750 msec User Privilege Level: Operator Required Parameters: { slot | all} Indicates the desired slot, or all slots. Default Values None Confirmation Message Testing leds in all active slots... (NOTE: all selected) LED test complete Command completed successfully. Example(s) Example 1: AXS2200> test leds au-1 LED test complete Command completed successfully. Example 2: AXS2200> test leds all Testing leds in all active slots... LED test complete Command completed successfully. Error Codes Page 879 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests test pon (slot-port) Description This service-affecting operation will test each ONT on the PON for proper operation within its assigned timeslots. The test is initiated by this command. Notification of the success or failure of the test is provided by an event message. Test results may be viewed by looking at the report for "show test result pon". Test execution will be accepted even if no (or only pre-provisioned) ONTs are configured and it is also independent of port state. Test execution will be rejected if - a test is already in progress on any of the PON ports of the selected slot - SFP has been removed - GPON card has been removed User Privilege Level: Operator Required Parameters: slot-port Selects the desired port. Default Values none Confirmation Message This test will affect service on all ONTs on the PON. Do you want to continue? y | n >y Command initiated. Example(s) Example 1: AXS2200> test pon au-5-1 This test will affect service on all ONTs on the PON. Do you want to continue? y | n >y Command initiated. Example 2: AXS2200> test pon sw-a-1 This test will affect service on all ONTs on the PON. Do you want to continue? y | n >y Invalid Port Page 880 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Tests Error Codes Invalid slot Test is already in progress Invalid port Invalid equipment state for request SFP is removed PON port is secondary - use primary PON port address Page 881 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 882 Tests AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Threshold Crossing Alerts Threshold Crossing Alerts set tca name (tcaname) mode ({rising | falling}) threshold (threshold) state ({active | inactive}) Description Configures Threshold settings for a specific TCA identified by name (show tca will list supported entries). User Privilege Level: Superuser Required Parameters: mode {rising | falling} Determines if the TCA is being triggered if a measured value falls below a target level (Falling) or rises above a target (Rising) state {active | inactive} Sets the state to active or inactive. name tcaname Name identifying the TCA. The following are allowed identifiers: gewanrcv (Received octets on GE ports) threshold threshold Configurable threshold against which measured counters are compared in order to determine if a TCA should be triggered. Valid range for this threshold is: 0 - 18446744073709551615 (unsigned 64 bit integer) Default Values state=inactive mode = rising Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> set tca name gewanrcv state active mode rising threshold 20 Command completed successfully Error Codes Invalid TCA Invalid value Page 883 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Threshold Crossing Alerts show tca name (tcaname) Description Shows the operator the state (active or inactive) and configured threshold behavior for all or a particular TCA as specified by the user. User Privilege Level: Operator Optional Parameters: name tcaname Name identifying the TCA. The following are allowed identifiers: gewanrcv (Received octets on GE ports) Default Values Confirmation Message Example(s) Example 1: AXS2200> show tca =============================================================================== SHOW TCA REPORT DATE: 09/17/2007 TIME: 16:08:22 =============================================================================== TCA State Mode Threshold ------------- -------- --------- --------------geewanrcv inactive falling 1000 =============================================================================== Command completed successfully Example 2: (specifying TCA name) AXS2200> show tca name gewanrcv =============================================================================== SHOW TCA REPORT DATE: 08/17/2001 TIME: 16:08:22 =============================================================================== TCA ------------geewanrcv State -------inactive Mode --------falling Threshold --------------1000 =============================================================================== Command completed successfully Error Codes Invalid TCA Page 884 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 885 Threshold Crossing Alerts AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization Timing / Synchronization clear timing refsw Description Clears the user-initiated timing reference switch for systems using revertive external reference switching. User Privilege Level: Operator Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> clear timing refsw Command completed successfully Error Codes Timing reference switch not active Page 886 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing mode external Description Allows the user to set the timing mode of the system to external BITS clock references. The system will establish the primary reference to bits-a and the secondary reference to bits-b. User Privilege Level: Superuser Default Values System initial default for timing mode = external Confirmation Message This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set timing mode external This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes Timing device configuration failed Invalid- timing is in holdover (maintenance) Timing already in requested mode Page 887 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing mode freerun Description Allows the user to set the timing mode of the system to freerun, which uses the internal system stratum-3 reference clock available on the active switch card. Note: Freerun is not a recommended timing mode. User Privilege Level: Superuser Default Values System initial default for timing mode = external Confirmation Message This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set timing mode freerun This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes Timing device configuration failed Timing already in requested mode Page 888 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing mode loop to pri (slot-port) sec (slot-port) Description Sets the timing mode of the system to loop timing. A primary port needs to be supplied via the command line and optionally a secondary reference to back up the primary in case of failure. Valid ports include 10GigE port on a switch card (e.g., sw-a-1, sw-b-1) and all ports on an Ethernet Line Card (e.g., au-x-{1-11}). Command will supercede any previous loop timing settings and can therefore be used to remove a secondary port if so desired. It is not allowed to select primary and secondary loop timing references on the same card (e.g., au-11-2 and au-11-3). User Privilege Level: Superuser Required Parameters: pri slot-port Specifies the primary loop timing reference port. Valid values include sw-a-1, sw-b-1 and 1G/10G ports on Ethernet Line Card. Optional Parameters: sec slot-port Specifies the secondary loop timing reference port. Valid values include sw-a-1, sw-b-1 and 1G/10G ports on Ethernet Line Card. Default Values System initial default for timing mode = external Confirmation Message This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (10GigE Ports, no reference via sw-b-1) AXS2200> set timing mode loop to pri sw-a-1 This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example 2: (Primary reference is sw-a-1, secondary is sw-b-1) AXS2200> set timing mode loop to pri sw-a-1 sec sw-b-1 This will affect the system timing. Do you want to continue? y | n Page 889 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization >y Example 3: (Primary reference is au-11-1, secondary is sw-b-1) AXS2200> set timing mode loop to pri au-11-1 sec sw-b-1 This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid port for timing reference Timing device configuration failed Invalid- timing is in holdover (maintenance) Timing already in requested mode Invalid - primary and secondary loop timing references on the same card Page 890 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing mode switch to ({holdover | clearholdover}) Description This command is used to switch the timing mode to holdover for maintenance purposes. Holdover will maintain timing locked to the last good reference for up to 24 hours. Holdover should be cleared as soon as possible. When the timing mode switch is cleared, the original provisioned timing mode is reinstated. This command is not valid for free-running systems. When a timing mode switch is active, the normal configured timing mode cannot be changed. To do so, first clear the timing mode switch (set timing mode switch to clearholdover). User Privilege Level: Operator Required Parameters: {holdover | clearholdover} Indicates whether to temporarily set or clear a timing mode switch to holdover. Default Values none Confirmation Message This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (set) AXS2200> set timing mode switch to holdover This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example 2: (clear) AXS2200> set timing mode switch to clearholdover This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes Timing device configuration failed Invalid timing mode Page 891 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing port ({bits-a | bits-b | all}) linecoding ({b8zs | ami}) framing ({esf | sf}) cablelength (feet-val-timing) Description This command allows the user to set the signal characteristics for the selected timing port(s). Values are shown in the table below. Default settings are indicated by an asterisk (*). ================================================== Format Linecoding Framing Cablelength ======= ============ ========== =============== ds1 ami* sf* 0-133* b8zs esf 133-266 266-399 399-533 533-655 ================================================== User Privilege Level: Superuser Required Parameters: {bits-a | bits-b | all} Identifies the timing port(s) that is being provisioned. Both input and output are configured for the selected port. Optional Parameters: cablelength feet-val-timing The value entered indicates the range of feet of ds1 cable from the system to interfacing device. Valid ranges are: 0-133 133-266 266-399 399-533 533-655 linecoding {b8zs | ami} Identifies the signal linecoding. framing {esf | sf} Selects the type of DS1 framing. Default Values framing = sf linecoding = ami Confirmation Message Page 892 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (DS1 BITS) AXS2200> set timing port all linecoding b8zs framing esf cablelength 0-133 This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes invalid framing Invalid cablelength Timing device configuration failed invalid equipment Invalid linecoding Page 893 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing refsw mode ({revertive | nonrevertive} ) Description Sets the mode for timing reference switches. This command is only valid for externally timed systems. User Privilege Level: Superuser Required Parameters: {revertive | nonrevertive} Selects the type of switching. - revertive: switches are latched, and must be cleared. Upon a clear, the active input is set to bits-a - nonrevertive: switches are transient and do not require clearing. Default Values nonrevertive Confirmation Message This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set timing refsw mode nonrevertive TThis will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid timing mode Timing device configuration failed Page 894 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing refsw to ({bits-a | bits-b}) Description This command is used to switch the active timing reference when the OLT timing mode is set to external. For systems using nonrevertive reference switching, the refsw is not cleared by the user. For systems using revertive reference switching, the user is able to manually switch the reference to bits-b only. The user-inititated refsw must be cleared by the user using "clear timing refsw", which will restore the reference to bits-a, assuming it is good. This command is not valid if the system has switched into Holdover due to either a user command or a failure of one or both references. This setting is not retained across a system reset. User Privilege Level: Operator Required Parameters: {bits-a | bits-b} Indicates the desired external timing port. Default Values not applicable Confirmation Message This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set timing refsw to bits-b This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes Timing device configuration failed Higher priority timing reference already active Invalid timing mode Revertive timing reference switch applies only to bits-b Page 895 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization set timing refsw to ({pri | sec}) Description This command is used to switch the active loop timing reference between the primary and the secondary port. This command is only valid for systems whose timing mode is set to loop. It is not valid if the system has switched into Holdover due to either a user command or a failure of one or both references. This setting is not retained across a system reset. User Privilege Level: Operator Required Parameters: {pri | sec} Selects the primary or secondary loop timing reference port. Default Values not applicable Confirmation Message This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set timing refsw to pri This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Example 2: AXS2200> set timing refsw to sec This will affect the system timing. Do you want to continue? y | n >y Command completed successfully Error Codes Higher priority timing reference already active Invalid timing mode Timing device configuration failed Secondary timing reference port not configured Page 896 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization show timing Description Displays all synchronization values for the system: System Timing - Admin Mode: Displays the timing mode admin state: external, loop, freerun, holdover (mnce from external), holdover (mnce from loop) - Oper Mode: Displays the timing mode operational state: external, loop, freerun, holdover , not operational (if switch card(s) are removed or failed) - Active Timing Card: Displays the slot (sw-a or sw-b) whose card is currently selected by the other slots in the chassis for timing distribution External Timing: - Mode: Active (only if the system is set for external timing mode), or Not Active - Reference Protection: Indicates the setting for revertive or non-revertive reference switching - Reference Switch: For Revertive switching only, indicates auto (if an automatic reference switch is in effect), manual (if a user-initiated switch is in effect), none (if External Timing is active and there is no reference switch in effect), or n/a (if nonrevertive switching is configured, or external timing mode is not configured). - Active Timing Reference: Indicates the actual reference: bits-a, bits-b, or none (if in holdover) - For each timing port, the Operating State (in-service, faulted or disabled), and settings for Format (ds1), Framing (esf, sf), Linecoding (ami, b8zs) and the CableLength (0-133, 133-266, 266-399, 399-533, 533-655) are provided. Loop Timing: - Mode: Active (only if the system is set for loop timing mode), or Not Active - Active Timing Reference: Indicates the actual reference: sw-a-1 or sw-b-1, au-x-{1-11}, or none (if in holdover) - For each timing port, the Operating State (in-service, faulted or disabled) Freerun Timing: - Mode: Active (only if the system is set for freerun timing mode), or Not Active User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: (External Timing, revertive reference switching, Switch card with GigE uplinks) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== Page 897 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization System Timing Admin Mode: external Oper Mode: external Active Timing Card: sw-a External Timing: Mode: active Reference Protection: revertive Reference Switch: none Active Timing Reference: bits-a Port -----------bits-a bits-b OperState ---------in-service in-service Format -----ds1 ds1 Framing ------sf esf Linecoding ---------ami b8zs CableLength ----------266-399 399-533 Loop Timing: Mode: Not Active Active Timing Reference: n/a Port ------------ OperStatus ---------- Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Example 2: (External Timing - nonrevertive reference switching, switch card with GigE uplinks) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: external Oper Mode: external Active Timing Card: sw-a External Timing: Mode: active Reference Protection: non-revertive Reference Switch: n/a Active Timing Reference: bits-a Port -----------bits-a bits-b OperState ---------in-service in-service Format -----ds1 ds1 Framing ------sf esf Linecoding ---------ami b8zs CableLength ----------266-399 399-533 Loop Timing: Mode: Not Active Active Timing Reference: n/a Port ------------ OperStatus ---------- Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Page 898 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization Example 3: (Freerun system with Switch card with GigE uplinks) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: freerun Oper Mode: freerun Active Timing Card: sw-a External Timing: Mode: not active Reference Protection: nonrevertive Reference Switch: none Active Timing Reference: n/a Port -----------bits-a bits-b OperState ---------disabled disabled Format -----ds1 ds1 Framing ------sf sf Linecoding ---------ami ami CableLength ----------0-133 0-133 Loop Timing: Mode: Not Active Active Timing Reference: n/a Port ------------ OperStatus ---------- Freerun Timing: Mode: Active =============================================================================== Command completed successfully Example 4: (External Timing with sw-a failed and sw-b active, using Switch cards with GigE uplinks) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: external Oper Mode: external Active Timing Card: sw-b External Timing: Mode: active Reference Protection: revertive Reference Switch: none Active Timing Reference: bits-a Port -----------bits-a bits-b OperState ---------in-service in-service Format -----ds1 ds1 Framing ------sf esf Linecoding ---------ami b8zs CableLength ----------266-399 399-533 Loop Timing: Mode: Not Active Active Timing Reference: n/a Page 899 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization Port ------------ OperStatus ---------- Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Example 5: External timing (sw-a unprotected), using Switch cards with GigE uplinks AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: external Oper Mode: external Active Timing Card: sw-a External Timing: Mode: active Reference Protection: revertive Reference Switch: none Active Timing Reference: bits-a Port -----------bits-a bits-b OperState ---------in-service in-service Format -----ds1 ds1 Framing ------sf esf Linecoding ---------ami b8zs CableLength ----------266-399 399-533 Loop Timing: Mode: Not Active Active Timing Reference: n/a Port ------------ OperStatus ---------- Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Example 6: (External Timing, system in automatic holdover due to faulty references, using Switch cards with GigE uplinks) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: external Oper Mode: holdover Active Timing Card: sw-a External Timing: Mode: active Reference Protection: revertive Page 900 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization Reference Switch: auto Active Timing Reference: none Port -----------bits-a bits-b OperState ---------faulted faulted Format -----ds1 ds1 Framing ------sf esf Linecoding ---------ami b8zs CableLength ----------266-399 399-533 Loop Timing: Mode: Not Active Active Timing Reference: n/a Port ------------ OperStatus ---------- Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Example 7: (External Timing, system in manual holdover due to user command, using Switch card with GigE uplinks) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: holdover (mnce from external) Oper Mode: holdover Active Timing Card: sw-a External Timing: Mode: active Reference Protection: revertive Reference Switch: none Active Timing Reference: none Port -----------bits-a bits-b OperState ---------in-service in-service Format -----ds1 ds1 Framing ------sf esf Linecoding ---------ami b8zs CableLength ----------266-399 399-533 Loop Timing: Mode: Not Active Active Timing Reference: n/a Port ------------ OperStatus ---------- Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Example 8: (External Timing, revertive switching with active switch due to user command, using Switch card with GigE uplinks) AXS2200> show timing =============================================================================== TIMING REPORT Page 901 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: External Oper Mode: External Active Timing Card: sw-a External Timing: Mode: active Reference Protection: revertive Reference Switch: manual Active Timing Reference: bits-b Port -----------bits-a bits-b OperState ---------in-service in-service Format -----ds1 ds1 Framing ------sf esf Linecoding ---------ami b8zs CableLength ----------266-399 399-533 Loop Timing: Mode: Not Active Active Timing Reference: n/a Port ------------ OperStatus ---------- Freerun Timing: Mode: Not Active Example 9: (Loop Timing using 10GigE Port on Switch card (sw-a-1) as primary source and sw-b-1 as secondary, currently no failure) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: Loop Oper Mode: Loop Active Timing Card: sw-a External Timing: Mode: not active Reference Protection: nonrevertive Reference Switch: none Active Timing Reference: n/a Port -----------bits-a bits-b OperState ---------disabled disabled Format -----ds1 ds1 Framing ------sf sf Linecoding ---------ami ami CableLength ----------0-133 0-133 Loop Timing: Mode: active Active Timing Reference: sw-a-1 Port -----------sw-a-1 sw-b-1 OperStatus ---------in-service in-service Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Example 10: Page 902 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Timing / Synchronization (Loop Timing using 10GigE Port on Switch card (sw-a-1) as primary source and au-11-1 as secondary, currently no failure) AXS2200> show timing =============================================================================== TIMING REPORT DATE: 08/31/2004 TIME: 07:14:40 =============================================================================== System Timing Admin Mode: Loop Oper Mode: Loop Active Timing Card: sw-a External Timing: Mode: not active Reference Protection: nonrevertive Reference Switch: none Active Timing Reference: n/a Port -----------bits-a bits-b OperState ---------disabled disabled Format -----ds1 ds1 Framing ------sf sf Linecoding ---------ami ami CableLength ----------0-133 0-133 Loop Timing: Mode: active Active Timing Reference: sw-a-1 Port -----------sw-a-1 au-11-1 OperStatus ---------in-service in-service Freerun Timing: Mode: Not Active =============================================================================== Command completed successfully Error Codes Page 903 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 904 Timing / Synchronization AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Traffic Table (QoS) Traffic Table (QoS) del traffic table name (traf-name) Description This command deletes the entry in the Traffic Descriptor Table identified by the traf-name value. Only entries that are not in use may be deleted. User Privilege Level: Superuser Required Parameters: name traf-name Indicates the user-defined name for the entry in the Traffic Descriptor Table (TD Table). This name will be used during connection setup to indicate the traffic parameters for transmit and receive directions. It is an alphanumeric string of up to 20 characters, plus "-" (dash) and "_" (underscore) characters. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> del traffic table name residentialinternet Command completed successfully Error Codes Invalid traf-name Command failed invalid - cannot delete default traffic table entries invalid - traffic descriptor in use for connection(s) Page 905 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Traffic Table (QoS) set traffic table name (traf-name) (pkt) pir (pir_vlan) cir (cir_vlan) Description This command sets up an entry in the TD table. Up to 1000 entries may be defined. NOTE: If an entry in the traffic table needs to be modified, you must delete the entry and re-enter it. User Privilege Level: Superuser Required Parameters: pir pir_vlan Indicates the PIR (peak information rate). Range of values is 0.1 to 1000.0 Mbps (Megabits per second) for ONT connections, 0.1 to 20,000.0 Mbps for OLT-WAN connections, in steps of 0.1 Mbps. The decimal point and tenths digit must always be entered. cir cir_vlan Indicates the CIR (committed information rate). Range of values is 0.0 to 1,000.0 Mbps (Megabits per second) for ONT connections, 0.0 to 20,000.0 Mbps for OLT-WAN connections, in steps of 0.1 Mbps. CIR must be less than or equal to PIR. The decimal point and tenths digit must always be entered. Note: PIR and CIR represent a connection's bandwidth to carry IP packets with Ethernet framing. traf-name name Indicates the user-defined name for the entry in the Traffic Descriptor Table (TD Table). This name will be used during connection setup to indicate the traffic parameters for transmit and receive directions. It is an alphanumeric string of up to 20 characters, plus "-" (dash) and "_" (underscore) characters. pkt Indicates a packet traffic descriptor. Used for all connections with one endpoint in a GigE port of the OLT. Default Values Confirmation Message Command completed successfully Example(s) Example 1: specifiy bandwidth for up to 4 pots channels AXS2200> set traffic table name pkt_voip4 pkt pir 2.0 cir 0.5 Command completed successfully Page 906 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Traffic Table (QoS) Error Codes Traffic Descriptor name is in use invalid traf-name -N reserved Invalid cir Invalid pir Invalid Mb/second Page 907 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Traffic Table (QoS) show traffic table name (traf-name) Description This will display a single entry or all entries in the Traffic Descriptor Table (TD Table). If no name is provided, all traffic table entries are shown. If a name is provided, only that entry will be shown. Parameters included in this report are: Name: Traf-name given by user at time of TD entry definition, or the name provided by system default Srvc Category: pkt PIR: Peak Information Rate in Mbps CIR: Committed Information Rate in Mbps User Privilege Level: Operator Optional Parameters: name traf-name Indicates the user-defined name for the entry in the Traffic Descriptor Table (TD Table). This name will be used during connection setup to indicate the traffic parameters for transmit and receive directions. It is an alphanumeric string of up to 20 characters, plus "-" (dash) and "_" (underscore) characters. Default Values None Confirmation Message Command completed successfully Example(s) Example 1: (Note: the example report shows the default traffic descriptor entries) AXS2200> show traffic table =============================================================================== TRAFFIC TABLE REPORT DATE: 07/26/2007 TIME: 16:08:22 =============================================================================== Traf-Name -------------------pkt_fttpdata pkt_pots2 pkt_pots8 pkt_pots16 pkt_pots24 pkt_voip2 pkt_voip4 pkt_voip8 pkt_voip16 pkt_voip24 pkt_video_sfu pkt_video_mdu pkt_iptvoltup pkt_iptvoltdown pkt_iptvontup Page 908 Srvc ------pkt pkt pkt pkt pkt pkt pkt pkt pkt pkt pkt pkt pkt pkt pkt PIR ------5.0 2.0 2.0 3.0 4.0 2.0 2.0 2.0 4.0 6.0 0.1 0.1 10.0 500.0 0.1 CIR ------0.0 0.3 0.9 1.8 2.6 0.5 0.9 1.7 3.4 5.1 0.1 0.1 10.0 500.0 0.1 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA pkt_iptvontdown pkt_satop_ds1 pkt_satop_e1 Traffic Table (QoS) pkt pkt pkt 5.0 2.3 2.8 5.0 2.3 2.8 =============================================================================== Command completed successfully Error Codes Invalid name Page 909 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 910 Traffic Table (QoS) AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting Troubleshooting clear mac-table ont (enetorponport) vlan (ontvlanid) mac (address) Description This operation clears learned MAC address values from the ONT port's MAC table. Options are: - Clear all learned MAC addresses for an individual VLAN (SVID for single tagged VLANs, or CVID for double tagged VLANs) - Clear individual MAC address - Clear all learned MAC addresses. By default, all learned MAC address values are deleted for the ONT port. SF2xxxxx ONTs do not support the ability to clear entries for an individual VLAN -- all entries or a single MAC address may be cleared from the MAC table for these ONTs. User Privilege Level: Superuser Required Parameters: ont enetorponport Indicates the ONT address for the data port. Valid values are: - oltslot-port-channel-porttype-index (e.g. au-5-1-1-enet-1) To determine the addresses available for a specific ONT, view the "show ont portsummary" response. Valid choices for the address parameters are: - oltslot (au-1 thru au-18 for AXS2200, or au-1 thru au-14 for AXS1800) - port (1-8) - channel (1-64) - porttype (enet, pon) - index (1-n) Optional Parameters: mac address Specifies a MAC address in standard (IEEE 802) format using six groups of two hexadecimal digits, separated by hyphens (-) Ex: 00-23-45-67-89-ab vlan ontvlanid Indicates the VLAN id on the ONT. For single-tagged connections, it is the S-VLAN ID {2-4085} For double-tagged connections, it is the C-VLAN ID {2-4085} Default Values All mac table entries for the port will be deleted if no further qualifier provided. Confirmation Message Page 911 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (clear all entries for an ONT Ethernet port) AXS2200> clear mac-table ont au-5-1-1-enet-1 This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n > y Command completed successfully Example 2: (clear entries for a single tagged VLAN on an ONT Ethernet port) AXS2200> clear mac-table ont au-5-1-1-enet-1 vlan 500 This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n > y Command completed successfully Example 3: (clear entries for a double tagged VLAN on an ONT PON port) AXS2200> clear mac-table ont au-5-1-1-pon-1 vlan 101 This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n > y Command completed successfully Example 4: (clear individual MAC address from an ONT Ethernet port) AXS2200> clear mac-table ont au-5-1-1-enet-1 mac 02-9A-82-11-0A-11 This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n > y Command completed successfully Error Codes MAC Table does not include VLAN IDs for this ONT platform ONT is in wrong state for this request VLAN member not configured Invalid MAC address ONT Invalid port ONT does not support this functionality Table entries can be cleared by VLAN or MAC address Invalid - multicast MAC address Page 912 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting clear mac-table port (wanorponport) svid (svlanid) mac (address) Description This operation clears learned MAC address values from the OLT GigE/10GigE or OLT GPON port's MAC table. Options are: - Clear learned MAC addresses for a particular SVLAN - Clear individual MAC address - Clear all learned MAC addresses By default, all learned MAC address values are deleted for the port. User Privilege Level: Superuser Required Parameters: port wanorponport Specifies one of the following ports: - GigE/10GigE WAN port (e.g. sw-a-1) - Link Aggregation group (e.g. lag-1) - PON port (e.g. au-5-1) Optional Parameters: svid svlanid Indicates the value for the S-VLAN ID. Valid values are {2-4085}. mac address Specifies a MAC address in standard (IEEE 802) format using six groups of two hexadecimal digits, separated by hyphens (-) Ex: 00-23-45-67-89-ab Default Values All mac table entries for the port will be deleted if no further qualifier provided. Confirmation Message This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (clear all entries for an OLT WAN GigE/10GigE port) AXS2200> clear mac-table port sw-a-1 This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n > y Command completed successfully Example 2: (clear entries for a S-VLAN on an OLT GPON port) Page 913 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting AXS2200> clear mac-table port au-5-1 svid 500 This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n > y Command completed successfully Example 3: (clear individual MAC address from an OLT 10GbE/GbE WAN port) AXS2200> clear mac-table port sw-a-2 mac 02-9A-82-11-0A-11 This will remove learned MAC address(es) from the ONT port MAC table. Do you want to continue? y | n > y Command completed successfully Example 4: (clear all entries for an OLT LAG port) AXS2200> clear mac-table port lag-1 This will remove learned MAC address(es) from the port MAC table. Do you want to continue? y | n > y Command completed successfully Error Codes Invalid MAC address Table entries can be cleared by VLAN or MAC address Invalid port Invalid svid Invalid LAG address Invalid - multicast MAC address Page 914 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting locate learned-mac (macaddress) Description Displays the ONT port where the MAC address was learned. Only one Locate Learned MAC Address operation is allowed at a time. If one is already in progress, retry after approximately 15 seconds. Multicast MAC addresses are not permitted; multicast MAC addresses have a 1 in the least significant bit of the most significant octet (example: 01-00-00-00-00-00) User Privilege Level: Operator Required Parameters: macaddress Specifies a MAC address in standard (IEEE 802) format using six groups of two hexadecimal digits, separated by dashes (-) Ex: 00-23-45-67-89-ab Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (success) AXS2200> locate learned-mac 00-ab-cd-12-34-56 =============================================================================== SHOW MAC ADDRESS DATE: 06/01/2007 TIME: 07:14:40 =============================================================================== ONT Port: VLAN -----100 au-5-1-1-enet-1 MAC ADDRESS ----------------00:ab:cd:12:34:56 =============================================================================== Command completed successfully Example 2: (failure) AXS2200> locate learned-mac 00-ab-cd-12-34-56 MAC address not found Command completed successfully Error Codes Invalid MAC address Only one operation allowed at a time - retry Invalid - multicast MAC address Page 915 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting ontget sip-profile ont (ontaddress) profile ({trustanchor | lnp | all}) Description This command forces a download of the selected SIP profiles to an ONT. It is only valid for ONTs configured for VoIP with active connections. Required input is a valid ONT AID. The user has the choice over which profile is downloaded via the profile keyword. Current Contents and information on profile downloads such as last time of download, download counter and state can be viewed via the show ont voip command. User Privilege Level: Superuser Required Parameters: ont ontaddress Specifies the address of the ONT in the format: - oltslot-port-channel (e.g. au-5-1-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT GPON card) - channel (the ONT channel on the PON) Optional Parameters: profile {trustanchor | lnp | all} Selects an ONT SIP profile for testing. Valid choices are: - Trust Anchor - Local Network Profile (lnp) - All (all profiles shown above will be selected) Default Values profile = all Confirmation Message This will overwrite current SIP settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> ontget sip-profile ont au-3-1-1 profile all Command completed successfully Example 2: AXS2200> ontget sip-profile ont au-3-1-1 profile lnp Command completed successfully Page 916 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting Error Codes Invalid - connection is inactive Connection does not exist Invalid for pre-provisioned ONTs without serial numbers ONT does not exist ONT is in wrong state for this request VOIP is not configured or supported on ONT Invalid SIP profile Invalid - No active subscription exists Page 917 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting ontget sip-profile pots (ontpotsaddress) profile ({device | application | user | all}) Description This command forces a download of the selected SIP profiles to an ONT. It is only valid for ONTs configured for VoIP with active connections. Required input is a valid ONT POTS Port AID. The user has the choice over which profile is downloaded via the profile keyword. Current Contents and information on profile downloads such as last time of download, download counter and state can be viewed via the show ont voip command. User Privilege Level: Superuser Required Parameters: ontpotsaddress pots Specifies the ONT POTS port address. It takes the following format: - oltslot-port-channel-pots-index (e.g. au-3-4-16-pots-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Optional Parameters: profile all} {device | application | user | Selects a Line SIP profile for testing. Valid choices are: - Device Application User All (all profiles listed above will be selected) Default Values profile = all Confirmation Message This will overwrite current SIP settings. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> ontget sip-profile pots au-3-1-1-pots-2 profile device Page 918 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting Command completed successfully Example 2: AXS2200> ontget sip-profile pots au-3-1-1-pots-2 profile all Command completed successfully Error Codes Connection does not exist Invalid- connection is inactive Invalid for pre-provisioned ONTs without serial numbers ONT Invalid port ONT is in wrong state for this request VOIP is not configured or supported on ONT Invalid - No active subscription exists Page 919 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting ontping (ontaddress) target (host) Description This command sends 4 ICMP echo messages (ping) of 64 byte length from the supplied ONT to the specified IP address or host name (or fully qualified domain name. After all requests have been sent, a summary is provided. The summary shows the number of packets sent and received, the percentage of packet loss, and the average round trip statistics. Ontping is supported for voice transport connectivity checks in both VoIP and H.248 mode and will be rejected if no voice service has been configured (either a VoIP or TDM connection is active or, for eh248 mode, an active VLAN member is configured) In case of H.248, the test allows checking for transport layer, MGC reachability issues. Address targets in tdm-H.248 mode are the MGC IP addresses: (192.169.0.1 for AU-1/AU-2 and 192.170.0.1 for AU-3/AU-4). For Externalized H.248, any valid IP address or FQDN can be used as target in the same way as in the VoIP case. The round trip time is shown rounded to the nearest millisecond. The request will timeout if no response is received from the ONT within 15 seconds. A host name is made up of one or more labels separated by dots. The maximum length of a host name is 100 chars. Labels are alphanumeric strings with hyphen; they cannot start or end with a hyphen, and are case insensitive. A label is {1-63} characters long. Please note that the AXS2200 will check only that - the max length of a domain name is no more than 100 chars - the valid character set includes alpha-numeric, period/dot, hyphen/dash [a-zA-Z0-9] . - In case of numeric IP address, it will check for a pattern of x.x.x.x where x is a number between 0 and 255. User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) target host IPv4 IP address in dotted notation or host name or Fully Qualified Domain Name (FQDN) Default Values Page 920 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting Confirmation Message Command completed successfully Example(s) Example 1: (success) AXS2200> ontping au-14-2-1 target 197.60.200.201 Ping statistics for 197.60.200.201 (197.60.200.201): Packets: Sent = 4, Received = 4, Lost = 0 (0% Loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 13ms, Average = 3ms Command completed successfully Example 2: (success using FQDN) AXS2200> ontping au-14-2-1 target w30398-03.am.mot.com Ping statistics for w30398-03.am.mot.com (10.15.199.58): Packets: Sent = 4, Received = 4, Lost = 0 (0% Loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 13ms, Average = 3ms Command completed successfully Example 3: (ping timeouts) AXS2200> ontping au-14-2-1 target 197.60.200.201 Ping statistics for 197.60.200.201 (197.60.200.201): Packets: Sent = 4, Received = 2, Lost = 2 (50% Loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 13ms, Average = 3ms Command completed successfully Example 4: (command timeout) AXS2200> ontping au-14-2-1 target 197.60.200.201 Ping request timeout Example 5: (success, H.248 mode) AXS2200> ontping au-14-2-1 target 192.169.0.1 Ping statistics for 192.169.0.1 (192.169.0.1): Packets: Sent = 4, Received = 4, Lost = 0 (0% Loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 13ms, Average = 3ms Command completed successfully Error Codes Invalid IP address or hostname Host lookup failed Test is already in progress Connection not defined Invalid connection state for request ONT does not exist ONT is in wrong state for this request Ping request timeout Page 921 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 922 Troubleshooting AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting set ont port pots (ontpotsaddress) sip-register Description Allows the user to force re-registration of a VoIP line with the softswitch. This can be used to diagnose problems in the registration process by monitoring the status fields under show ont port after execution of this command. User Privilege Level: Superuser Required Parameters: pots ontpotsaddress Specifies the ONT POTS port address. It takes the following format: - oltslot-port-channel-pots-index (e.g. au-3-4-16-pots-1) To determine the number of ports available for a specific ONT, view the "show ont portsummary" report. Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) sip-register Forces re-registration of the POTS line with the Softswitch. Default Values Confirmation Message This may temporarily affect voice service on the port. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (POTS port) AXS2200> set ont port pots au-5-1-16-pots-1 sip-register This may temporarily affect voice service on the port. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid ONT equipment state for request VOIP is not configured or supported on ONT ONT Invalid port Page 923 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 924 Troubleshooting AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs Troubleshooting and Logs clear aco Description Turns on the ACO LED of the system controller, and turns off any audible alarms associated with active alarm conditions. This procedure may also be performed by pressing the ACO button located on the active system controller card. A subsequent alarm will cause the LED to turn off and any associated audible alarms will re-activate. User Privilege Level: Operator Default Values None Confirmation Message Ccompleted successfully Example(s) Example 1: AXS2200> clear aco Command completed successfully Error Codes Page 925 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs clear log alarms-cond Description Clears all entries for alarmed and non-alarmed conditions from the log. User Privilege Level: Admin Required Parameters: alarms-cond Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> clear log alarms-cond Command completed successfully. Error Codes Page 926 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs ping (ipaddress) datalength (bytes) count (count) Description This command sends an ICMP echo message (ping) to the specified IP address. Round trip times and packet loss statistics are computed. For each echo request that is sent, the packet length, sequence number, and time to respond are displayed. The round trip time is shown rounded to the nearest millisecond. If there is no response within 5 seconds, then timeout will be shown. After all requests have been sent, a summary is provided. The summary shows the total number of packets sent and received, the percentage of packet loss, and the average round trip statistics. If there was no response, then the round trip statistics are not displayed.. User Privilege Level: Operator Required Parameters: ipaddress Identifies the desired ip-address. Optional Parameters: count count Indicates the number of ICMP echo requests to send. Values range from 1- 65535. datalength bytes Indicates the data length of the packet. Values range from 16-1024 bytes. Default Values Count= 1 Datalength= 64 bytes Timeout= 5 seconds Confirmation Message Command completed successfully Example(s) Example 1: (success) AXS2200> ping 197.60.200.201 count 2 64 bytes from 197.60.200.201: 64 bytes from 197.60.200.201: icmp_seq=1 time=1 ms icmp_seq=2 time=2 ms 2 packets transmitted 2 packets received 0% packet loss round trip (ms) min/avg/max = 1/2/2 Command completed successfully Example 2: (failure) Page 927 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs AXS2200> ping 197.60.200.201 count 2 0 bytes from 197.60.200.201: 0 bytes from 197.60.200.201: icmp_seq=1 time=timeout icmp_seq=2 time=timeout 2 packets transmitted 0 packets received 100% packet loss Command completed successfully Error Codes Page 928 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs set debug sigtracelog vg-voice ({crv | timeslot}) state ({enable | disable}) Description Call Signaling Trace Logs are available for troubleshooting voice channels. The log captures signaling messages - between the Voice Gateway and the Class 5 switch - between the MGC and the MG on the ONT. Up to four (4) concurrent call signaling trace logs may be enabled. When a log is enabled, CAS signaling, channel state and GR-303 TMC messages are captured and stored in memory for the POTS line. While the log is active, the contents may be viewed using: "show debug sigtracelog vg-voice" or "show debug sigtracelog summary". When the log is no longer required, it should be disabled in order to free up system resources. The contents of the log are volatile and will not survive a reset of the Voice Gateway card. User Privilege Level: Operator Required Parameters: {crv | timeslot} vg-voice Specifies the CRV or a T0 Timeslot on the Voice Gateway card. crv takes the format of slot-igtype-index-crv, where: - slot is the slot where the Voice Gateway card is inserted - igtype is gr303 or tr08 - index indicates which interface group and takes a value from 1- 8 for GR-303, or 1-14 for TR-08 interface groups. - crv indicates the call reference value and depends on the type of interface used: - tr08: 1-96 - gr303: 1- maxcrv (default maxcrv is 2048) Note: maxcrv is configurable by GR-303 interface group. For example: au-1-gr303-7-1 and au-1-tr08-1-1 timeslot is the T1CAS timeslot on the VG card which takes the format slot-port-timeslot where: - slot is one of the following au-{1,3} - port is a value from {1-56} - timeslot is a value from {1-24} For example: au-1-1-21 state {enable | disable} Sets the state to enable (AdminState up) or disable (AdminState down). sigtracelog Indicates the POTS call Signaling Trace log. Default Values By default, no call trace logs are enabled. Page 929 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs Confirmation Message This command will enable or disable the call signaling trace log. Do you want to continue? y| n >y Command completed successfully Example(s) Example 1: AXS2200> set debug sigtracelog vg-voice au-1-gr303-1-100 state enable This command will enable or disable the call signaling trace log. Do you want to continue? y| n >y Command completed successfully Error Codes Voice gateway not equipped Maximum number of signaling trace logs are enabled already Invalid for a port on the protn slot of a 1+1 APS group - use working slot Invalid equipment state for request POTS channel not configured Invalid crv Invalid Interface group Invalid t1cas timeslot Page 930 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show alarms Description Displays all currently active alarms for the OLT and all attached ONTs. Each entry in the report will show the displayed alarm as shown in the TL1 autonomous message. Each line reports the alarm data in the following format: "Address, aidtype: ntfncde, condtype, srveff, date, time,,:\"alarm description\"," The definitions for the fields that display are as follows: Address: The AID of the fault aidtype: The type of address for the failure (e.g. T1, EQPT, etc.) ntfncde: The TL1 notification code (i.e. MN, MJ, CR). condtype: The TL1 condition type (e.g. LOS) srveff: Whether the condition is service-affecting (SA) or not (NSA) date: Displays the date the alarm was generated (MM-DD) time: Displays the time the alarm was generated (HH-MM-SS) If there are no currently active alarms, "no alarms active" will be shown. Environmental alarms are not included in this report. To view environmental alarms, use the command "show alarms-env". To view all currently active conditions including those that are not alarmed, use "show cond". NOTE: This command reports up to 250 outstanding alarms. If more alarms are currently active, a message will display at the end of the report to alert the user that the report limit maximum was reached. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show alarms =============================================================================== ACTIVE ALARM REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== "SW-A-1,GIGE:CR,LINKFAIL,SA,11-3,10-31-2,,:\"Link Failure\"," "AU-8,EQPT:MN,IMPROPRMVL,NSA,11-2,13-13-5,,:\"Card Removed\"," "BITS-A,COM:MN,SYNCBITSLOS,NSA,11-2,4-14-29,,:\"BITS LOS\"," =============================================================================== Command completed successfully Example 2: (No current alarms) AXS2200> show alarms =============================================================================== ACTIVE ALARM REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== Page 931 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs no alarms active =============================================================================== Command completed successfully Example 3: (More than the 250 outstanding alarms active) AXS2200> show alarms =============================================================================== ACTIVE ALARM REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== "SW-A-1,GIGE:CR,LINKFAIL,SA,11-3,10-31-2,,:\"Link Failure\"," "AU-8,EQPT:MN,IMPROPRMVL,NSA,11-2,13-13-5,,:\"Card Removed\"," ...(more up to the reportable limit)... "BITS-A,COM:MN,SYNCBITSLOS,NSA,11-2,4-14-29,,:\"BITS LOS\", Maximum report limit reached. =============================================================================== Command completed successfully Error Codes Page 932 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show alarms-env Description This report displays the environmental alarms that are currently active in the system. Environmental alarms include fan, power alarms and miscellaneous discrete inputs. Each entry in the report will show the displayed condition as shown in the TL1 report for RTRV-ALM-ENV. Each line reports the environmental alarm data in the following format: "Address: ntfcncde, almtype, date, time, \"environmental alarm description\"" The definitions for the fields that display are as follows: Address: The AID of the fault ntfncde: The TL1 notification code (i.e. MN, MJ, CR). almtype: The TL1 alarm type (e.g. FAN) date: Displays the date the condition was generated (MM-DD) time: Displays the time the condition was generated (HH-MM-SS) If there are no environmental alarms active, the report will display the message "no environmental alarms active". To view other types of active alarms (i.e. not environmental) use "show alarms". User Privilege Level: Operator Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show alarms-env =============================================================================== ACTIVE ENVIRONMENTAL ALARMS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== "ENV-1:MN,MISC-1,11-6,13-24-43,\"Miscellaneous Input OPEN-DOOR\"" "AU-5-1-16-ONT:MN,BATTERYMISS,11-6,13-22-12,\"ONT Battery Missing\"" =============================================================================== Command completed successfully Example 2: (No current environmental alarms) AXS2200> show alarms-env =============================================================================== ACTIVE ENVIRONMENTAL ALARMS REPORT DATE: 08/17/2004 TIME: 16:08:22 =============================================================================== no environmental alarms active =============================================================================== Command completed successfully Page 933 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs Error Codes Page 934 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show cond Description Displays all currently active alarmed and non-alarmed conditions for the OLT and all attached ONTs. Each entry in the report will show the displayed condition as shown in the TL1 autonomous message. Each line reports the alarm data in the following format: "Address, aidtype: ntfncde, condtype, srveff, date, time,,:\"condition description\"," The definitions for the fields that display are as follows: Address: The AID of the fault aidtype: The type of address for the failure (e.g. GIGE, T1, EQPT, etc.) ntfncde: The TL1 notification code (i.e. MN, MJ, CR for alarms, and NA for non-alarmed conditions). condtype: The TL1 condition type (e.g. LOS) srveff: Whether the condition is service-affecting (SA) or not (NSA) date: Displays the date the condition was generated (MM-DD) time: Displays the time the condition was generated (HH-MM-SS) If there are no currently active conditions, "no conditions active" will be shown. To view only currently active alarms, use "show alarms". Environmental alarms are not included in this report. To view environmental alarms, use the command "show alarms-env". NOTE: This command reports up to 250 outstanding conditions. If more are currently active, a message will display at the end of the report to alert the user that the report limit maximum was reached. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show cond =============================================================================== ACTIVE CONDITIONS REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== "SW-A-1,GIGE:CR,LINKFAIL,SA,11-3,10-31-2,,,\"Link Failure\"," "AU-8,EQPT:MN,IMPROPRMVL,NSA,11-2,13-13-5,,,\"Card Removed\"," "BITS-A,COM:MN,SYNCBITSLOS,NSA,11-2,4-14-29,,,\"BITS LOS\"," =============================================================================== Command completed successfully Example 2: (no active conditions) AXS2200> show cond =============================================================================== ACTIVE CONDITIONS REPORT Page 935 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== no conditions active =============================================================================== Command completed successfully Example 3: (Maximum report limit reached) AXS2200> show cond =============================================================================== ACTIVE CONDITIONS REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== "SW-A-1,GIGE:CR,LINKFAIL,SA,11-3,10-31-2,,,\"Link Failure\"," "AU-8,EQPT:MN,IMPROPRMVL,NSA,11-2,13-13-5,,,\"Card Removed\"," (...more up to limit of report...) "BITS-A,COM:MN,SYNCBITSLOS,NSA,11-2,4-14-29,,,\"BITS LOS\"," Maximum report limit reached. =============================================================================== Command completed successfully Error Codes Page 936 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show debug sigtracelog summary slot (slot) Description Displays the call signaling trace logs that are currently enabled. on the Voice Gateway card in the designated slot. Up to four (4) logs may be enabled at the same time. User Privilege Level: Operator Required Parameters: sigtracelog Indicates the POTS call Signaling Trace log. slot slot Indicates the slot/card. summary Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show debug sigtracelog summary slot au-1 =============================================================================== Signaling Trace Log Summary Report DATE: 7/29/2007 TIME: 20:15:40 =============================================================================== POTS Line (CRV or Timeslot) --------------------------au-1-gr303-1-100 au-1-tr08-1-20 au-1-28-24 =============================================================================== Command completed successfully Error Codes Invalid for the protection slot of a 1+1 protected group - select working slot Signaling Trace Log is not enabled Voice gateway not equipped Page 937 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show debug sigtracelog vg-voice ({crv | timeslot}) Description Displays the contents of the Call Signaling Trace log for specified POTS channel. Reported information includes: Timestamp: month:date:year hour:minute:second:milliseconds Interface: TDM (facing the Class 5 Switch), PKT (facing the CPE device over H.248/RTP) Direction: tx (transmit), rx (receive). This is relative to the Interface. H.248/RTP GR-303, T1CAS, TR-08 <----------------- tx rx <--------------------CPE ------------------ PKT Voice GATEWAY TDM ---------------------- Class 5 switch ------------------> rx tx ---------------------> Type of Message: CAS (Channel Associated Signaling), CHSTATE (Channel state), TMC (GR-303 Timeslot Management Channel), H.248/RTP (Packet) Message: The actual message contents NOTE: CAS messages are only shown for the H.248 interface. User Privilege Level: Operator Required Parameters: sigtracelog Indicates the POTS call Signaling Trace log. vg-voice {crv | timeslot} Specifies the CRV or a T0 Timeslot on the Voice Gateway card. crv takes the format of slot-igtype-index-crv, where: - slot is the slot where the Voice Gateway card is inserted - igtype is gr303 or tr08 - index indicates which interface group and takes a value from 1- 8 for GR-303, or 1-14 for TR-08 interface groups. - crv indicates the call reference value and depends on the type of interface used: - tr08: 1-96 - gr303: 1- maxcrv (default maxcrv is 2048) Note: maxcrv is configurable by GR-303 interface group. For example: au-1-gr303-5-1 timeslot takes the format: slot-port-ds1-timeslot, where - slot is the slot where the voice gateway is inserted. - port takes a value of 1 or 2 - ds1 takes a value between 1 and 28, and - timeslot takes a value between 1 and 24 For example: au-1-1-1-1 Default Values none Confirmation Message Command completed successfully Page 938 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs Example(s) Example 1: AXS2200> show debug sigtracelog vg-voice au-1-gr303-1-100 =============================================================================== Signaling Trace Log Individual Report DATE: 7/29/2007 TIME: 20:15:40 =============================================================================== 07:29:2007 20:14:23:091 Interface: PKT Direction: rx CAS change from ON-HOOK to OFF-HOOK Type of Message: CAS 07:29:2007 20:14:22:998 Interface: TDM Direction: tx GR303 detect subscriber OFF-HOOK Type of Message: TMC 07:29:2007 20:14:23:023 Interface: TDM GR303 TMC SETUP Direction: rx Type of Message: TMC 07:29:2007 20:14:22:059 Interface: TDM GR303 Crossconnect Active Direction: tx Type of Message: TMC 07:29:2007 20:14:22:110 Interface: PKT Direction: rx CAS change from OFF-HOOK to ON-HOOK Type of Message: CAS 07:29:2007 20:14:22:163 Interface: TDM GR303 TMC DISCONNECT Direction: tx Type of Message: TMC 07:29:2007 20:14:22:219 Interface: TDM Direction: tx GR303 Crossconnect Deactivated Type of Message: TMC 07:29:2007 20:14:22:239 Interface: TDM Direction: rx GR303 TMC Connection Released Type of Message: TMC =============================================================================== Command completed successfully Error Codes Invalid equipment state for request Signaling Trace Log is not enabled Invalid for a protection slot of a 1+1 protected group - select working slot Voice gateway not equipped Invalid crv Invalid Interface group Invalid t1cas timeslot Page 939 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show log alarms Description Displays the history of alarmed conditions for the OLT and all attached ONTs, in order of time of occurance (the most recent activity is listed first). The log includes environmental alarms. Each row in the report will display the alarm based on the TL1 report RTRV-ALM. Each line takes the format: "Address, aidtype: ntfncde, typerep, srveff, date, time,,:\"description\"," The definitions for the fields that display are as follows: Address: The AID of the fault aidtype: The type of address for the failure (e.g. GIGE, T1, EQPT, etc.) ntfncde: The TL1 notification code (i.e. MN, MJ, CR, or CL) typerep: The TL1 condition type or environmental alarm type (e.g. LOS) srveff: Whether the condition is service-affecting (SA) or not (NSA) date: Displays the date the condition was generated (MM-DD) time: Displays the time the condition was generated (HH-MM-SS) description: Displays the description of the condition. Due to line length limitations, the description will be truncated if necessary. If there are no entries in the log, "log is empty" will be shown. To view the log for both alarmed and non-alarmed conditions, use "show log cond". NOTE: This command reports up to 250 log entries. Once that limit is reached, a new entry will overwrite the oldest prior entry. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show log alarms =============================================================================== ALARMS HISTORY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== "SW-A-1,GIGE:CR,LINKFAIL,SA,11-10,10-31-2,,:\"Link Failure\"," "AU-8,EQPT:MN,IMPROPRMVL,NSA,11-9,13-13-5,,:\"Card Removed\"," "BITS-A,COM:CL,SYNCBITSLOS,NSA,11-8,4-14-30,,:\"BITS LOS\"," "BITS-A,COM:MN,SYNCBITSLOS,NSA,11-8,4-14-29,,:\"BITS LOS\"," "ENV-1,ENV:CL,MISC-1,NSA,11-4,12-24-36,,:\"Miscellaneous Input OPEN-DOOR\"," "ENV-1,ENV:MN,MISC-1,NSA,11-4,12-24-33,,:\"Miscellaneous Input OPEN-DOOR\"," =============================================================================== Command completed successfully Example 2: (empty log) AXS2200> show log alarms =============================================================================== Page 940 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs ALARMS HISTORY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== log is empty =============================================================================== Command completed successfully Error Codes Invalid log type Page 941 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show log cli Description Displays a log of CLI user command history. CLI logs display the following: Date: Displays the date the command was performed. Time: Displays the time the command was performed. Source: Indicates the method of CLI access - Console (local console) or Telnet (remote login). IP Address: Indicates the IP address for the Telnet session (if remote). User Name: Indicates the login user name. Command: Indicates the command performed. NOTE: This command reports up to 100 log entries. Once that limit is reached, a new entry will overwrite the oldest prior entry. Note: This command is restricted to users with administrator privileges. User Privilege Level: Admin Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show log cli =============================================================================== CLI COMMAND HISTORY REPORT DATE: 01/05/2004 TIME: 11:38:20 =============================================================================== Date ---------01/05/2004 01/05/2004 01/05/2004 01/05/2004 01/05/2004 01/05/2004 01/05/2004 01/05/2004 Time -------11:38:10 11:38:02 11:36:41 11:36:31 11:35:49 11:16:14 11:16:08 11:01:32 Source ------TELNET CONSOLE CONSOLE TELNET TELNET TELNET CONSOLE CONSOLE IP Address --------------63.63.63.63 111.111.100.100 111.111.100.100 111.111.100.100 User Name ---------admin admin admin admin admin admin admin admin Command ------------------show eqpt show log cli show sessions show log session show log cli show log alarm clear log alarms show log session (C)ontinue or (Q)uit? [C] q =============================================================================== Command completed successfully. Error Codes Invalid log type Page 942 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show log cond Description Displays the history of alarmed and non-alarmed conditions for the OLT and all attached ONTs, in order of time of occurance (the most recent activity is listed first). Environmental alarms are included in the log. Each entry in the report will show the displayed condition based on the TL1 report for RTRV-COND, with some changes for transient conditions. The format used is: "Address, aidtype: ntfcncde/condeff, typerep, srveff, date, time,,,\"description\"," The definitions for the fields that display are as follows: Address: The AID of the fault aidtype: The type of address for the failure (e.g. GIGE, T1, EQPT, etc.) ntfncde/condeff: The TL1 notification code (i.e. MN, MJ, CR, NA, CL) or condition affecting code (TC for transient condition) typerep: The TL1 condition type or environmental alarm type (e.g. LOS) srveff: Whether the condition is service-affecting (SA) or not (NSA) date: Displays the date the condition was generated (MM-DD) time: Displays the time the condition was generated (HH-MM-SS) description: Displays the description of the condition. Due to line length limitations, the description will be truncated if necessary. If there are no entries in the log, "log is empty" will be shown. To view only the alarm log, use "show log alarms". NOTE: This command reports up to 500 log entries. Once that limit is reached, a new entry will overwrite the oldest prior entry. User Privilege Level: Operator Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show log cond =============================================================================== CONDITION HISTORY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== "SW-A-1,GIGE:CR,LINKFAIL,SA,11-10,10-31-2,,,\"Link Failure\"," "AU-8,EQPT:MN,IMPROPRMVL,NSA,11-9,13-13-5,,,\"Card Removed\"," "BITS-A,COM:CL,SYNCBITSLOS,NSA,11-8,4-14-30,,,\"BITS LOS\"," "BITS-A,COM:MN,SYNCBITSLOS,NSA,11-8,4-14-29,,,\"BITS LOS\"," "AU-1,EQPT:TC,INIT,NSA,11-6,9-23-06,,,\"Card Initialization\"," "ENV-1,ENV:CL,MISC-1,NSA,11-4,12-24-36,,,\"Miscellaneous Input OPEN-DOOR\"," "ENV-1,ENV:MN,MISC-1,NSA,11-4,12-24-33,,,\"Miscellaneous Input OPEN-DOOR\"," =============================================================================== Command completed successfully Example 2: (empty log) AXS2200> show log cond Page 943 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs =============================================================================== CONDITION HISTORY REPORT DATE: 06/01/2007 TIME: 16:08:22 =============================================================================== log is empty =============================================================================== Command completed successfully Error Codes Page 944 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs show log sessions Description Displays a log of user login sessions. Session logs contain the following information for each login attempt/logout: - timestamp - user name - privilege level (n/a if failed login) - method of access (console, telnet, tl1, or ftp) - session id - whether the access was a login (succeeded or failed), or logout - the client IP address for the telnet or TL1 session - the method of authentication (olt or radius or "n/a" for when the authentication fails) Note: This command is restricted to users with administrator privileges. NOTE: This command reports up to 100 log entries. Once that limit is reached, a new entry will overwrite the oldest prior entry. User Privilege Level: Admin Default Values None Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show log sessions =============================================================================== SESSION HISTORY REPORT DATE: 10/12/2009 TIME: 20:21:37 =============================================================================== Date ---------10/12/2009 10/12/2009 Time -------20:04:55 19:55:35 UserID -------admin admin Priv Access ----- -----ADMIN CON ADMIN TEL ID --0 2 10/12/2009 19:54:31 admin ADMIN FTP 1 10/12/2009 10/12/2009 19:54:21 19:47:26 admin admin ADMIN ADMIN CON TEL 0 1 10/12/2009 10/12/2009 19:44:53 18:36:22 admin admin ADMIN ADMIN CON FTP 0 1 10/12/2009 18:35:42 admin ADMIN FTP 1 10/12/2009 18:35:09 admin ADMIN FTP 1 Action Auth -------------- -------login-success radius login-success radius 10.13.218.60 login radius 10.13.218.60 login-success radius login-success olt 10.13.218.60 login-success n/a login olt 10.13.218.60 logout olt 10.13.218.60 login n/a (C)ontinue or (Q)uit? [C] q =============================================================================== Command completed successfully. Example 2: Page 945 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Troubleshooting and Logs (with some login failures) AXS2200> show log sessions =============================================================================== SESSION HISTORY REPORT DATE: 03/17/2010 TIME: 19:02:37 =============================================================================== Date Time UserID Priv Access ID Action ---------- -------- ---------- --------- ------ --- --------------03/17/2010 19:02:33 user008 n/a TEL 1 login-failed 10.13.217.64 03/17/2010 19:02:17 user008 n/a TEL 1 login-failed 10.13.217.64 03/17/2010 19:01:47 admin ADMIN CON 0 login-success 03/17/2010 18:52:31 admin ADMIN CON 0 timeout 03/17/2010 18:52:15 userO3 OPERATOR TEL 2 timeout 10.13.217.64 03/17/2010 18:48:16 oper OPERATOR TEL 1 timeout 10.13.217.64 03/17/2010 18:37:16 userO3 OPERATOR TEL 2 login-success 10.13.217.64 03/17/2010 18:35:46 user03 n/a TEL 2 login-failed 10.13.217.64 03/17/2010 18:35:29 user03 n/a TEL 2 login-failed 10.13.217.64 Auth -----n/a n/a n/a n/a olt radius olt olt radius radius olt olt n/a n/a n/a n/a Command completed successfully Error Codes Invalid log type Page 946 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 947 Troubleshooting and Logs AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Video Return Path Video Return Path del video-rpd Description Deletes the Video RPD functionality. Any ONT that has the video ports set to enabled will continue to carry downstream video traffic. This command requires that the video-rpd functionality has the administrative state set to inactive first (set video-rpd state). Warning! Once this command completes, all video return path connections configurations are automatically removed from all ONTs. User Privilege Level: Superuser Default Values Confirmation Message This will delete all video return path connections. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del video-rpd This will delete all video return path connections. Do you want to continue? y | n > y Command completed successfully Error Codes Video-RPD is not set Video-RPD must first have admin state set to inactive Page 948 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Video Return Path set video-rpd dest-ipaddr (ip_address) udpport (udpport) freq (frequency) threshold-apps ({10-1000}) threshold-mpps ({10-1000}) next-hop (ipaddress) Description Sets the video-RPD functionality for the entire OLT system. The OLT Source IP address defaults to the IP address of the Enet-mgt port. - The destination IP address is the IP address for the video management system (NC1500, HMS, RADD). It must be a valid Class A, B or C address (e.g the first octet must be 1-223). - The UDP value (defaults to 5861). - The frequency is applied to all ONTs to set the frequency of the upstream data. The 2 thresholds are settable for Threshold Crossing Alerts. Default values for the TCA thresholds are used automatically, unless they are changed. To enable this functionality, the destination IP address and the frequency must be set. All other parameters support default values. If any ONT video ports are set to enable by a prior operation, an upstream connection will be automatically configured to it once this command executes. To change parameters for existing Video RPD functionality, only the parameters being changed must be specified. At least one parameter has to be specified. To delete the RPD functionality from the OLT, and thereby delete all upstream video connections for all ONTs, first set the admin state to inactive using "set video-rpd state", then use the "del video-rpd" command. Note: The source IP address for all video return path traffic is set to the OLT-mgt IP address. Consult the command "set chassis olt-mgt" for more information. User Privilege Level: Superuser Optional Parameters: dest-ipaddr ip_address Specifies the destination IP address for the Video Return Path traffic. This is not allowed to be set to the same IP address as any of the local management IP addresses (olt-mgt, in-band-mgt or out-of-band-mgt). udpport udpport This is the UDP port to be used for the destination. The range of valid values is 1-65535. freq frequency The frequency for video return path demodulation. The valid values are given in units of MHz: 10.016 10.208 10.4 10.592 10.784 10.976 11.168 11.36 11.552 Page 949 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Video Return Path 11.744 11.936 threshold-apps {10-1000} Sets the RPD threshold for the average packets per second. This is applied to all PON card slots. When the threshold is crossed, a threshold crossing alert (TCA) is generated. threshold-mpps {10-1000} Sets the RPD threshold for the maximum packets per second. This is applied to all PON card slots. When the threshold is crossed, a threshold crossing alert (TCA) is generated. next-hop ipaddress IP address of next hop in path. This must be on the same subnet as the local interface. Default Values threshold-apps = 75 threshold-mpps = 90 admin state = active UDP port = 5861 Confirmation Message This command will affect existing video connections. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (setting new RPD functionality, using default UDP port) AXS2200> set video-rpd dest-ipaddr 197.80.100.100 freq 10.016 next-hop 10.10.10.10 This command will affect existing video connections. Do you want to continue? y | n >y Command completed successfully Example 2: (setting new RPD functionality, specifying a non-default UDP port) AXS2200> set video-rpd dest-ipaddr 197.80.100.100 udpport 5000 freq 10.016 This command will affect existing video connections. Do you want to continue? y | n >y Command completed successfully Example 3: (changing a subset of existing RPD functionality) AXS2200> set video-rpd udpport 5000 This command will affect existing video connections. Do you want to continue? y | n >y Command completed successfully Example 4: (Setting threshold levels after video-rpd is set) Page 950 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Video Return Path AXS2200> set video-rpd threshold-apps 60 threshold-mpps 100 This command will affect existing video connections. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid frequency Invalid threshold Invalid UDP value Invalid IP Address Video dest-ipaddr cannot be set to the in-band or out-of-band IP address Switch Management port IP address must be set before Video RPD is configured. Next hop and port IP can not be the same IP Address Next hop must be in the same subnetwork as the port IP address Next-hop is not required since dest-IP address is in the same subnetwork. Next-hop exists. Dest-ip can not be in same subnet with enet-mgt. Invalid next-hop Next-hop is required since dest-ip address is on a different subnetwork Video RPD threshold-apps must be a lower value than threshold-mpps Video ports of all ONTs supporting VRPD must be disabled first Dest-IP cannot be in In-Band subnetwork Page 951 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Video Return Path set video-rpd state ({active | inactive}) Description Sets the administrative state of the Video RPD functionality. Prior to the change of Video RPD administrative state, video ports of all ONTs should be diabled first. The Video-RPD functionality must be first set to inactive before the user is allowed to delete it. User Privilege Level: Superuser Required Parameters: state {active | inactive} Sets the state to active or inactive. Default Values By default, the video-rpd is active when created Confirmation Message This will set all video return path connections to inactive for the system. Do you want to continue? y|n >y Command completed successfully Example(s) Example 1: AXS2200> set video-rpd state inactive This will set all video return path connections to inactive for the system. Do you want to continue? y|n >y Command completed successfully Error Codes Video-RPD is not set Video ports of all ONTs supporting VRPD must be disabled first Page 952 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Video Return Path show video-rpd Description Shows the video-rpd configuration for the OLT. Displayed fields include: - Admin State of the Video Return Path function (active, inactive) - Destination IP address: Destination IP address for the NC1500, HMS, RADD or equivalent video management system - UDP Port: The value of the destination UDP port - Next-Hop IP address: The next hop IP address (configured IP address or none) - OLT Source IP address: The enet-mgt IP address - Frequency (MHz): The frequency used for all upstream traffic - Threshold setting for Average Packets/Second TCA Notifications. - Threshold setting for Maximum Packets/Second TCA Notifications. Note: The source IP address for Video Return Path traffic uses the OLT-MGT IP address (consult command set chassis olt-mgt and show mgt). User Privilege Level: Operator Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show video-rpd =============================================================================== VIDEO-RPD REPORT DATE: 04/17/2004 TIME: 16:08:22 =============================================================================== Admin State: active Destination IP Address: 192.80.100.100 UDP Port: 5861 Next-Hop IP Address: 10.10.10.10 OLT source IP Address: 172.16.16.16 Frequency (MHz): 10.016 Threshold for Average packets/second TCA: Threshold for Maximum packets/second TCA: 75 90 =============================================================================== Command completed successfully Error Codes Video-RPD is not set Page 953 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 954 Video Return Path AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Voice Gateway add port vg-ds1 (ds1aid) ig (slot-igtype-index) ds1map ({1-28}) shelf ({a | b | c | d}) Description Assigns a DS1 logical port to a GR-303 or TR-08 interface group. If the DS1 is being assigned to a GR-303 Interface Group, then the ds1map must be specified. If this is the first DS1 assigned to the interface group, it will be used for the primary path for TMC and EOC channels; it must also be set to ds1map 1. For DS1's in a GR-303 Interface group, the framing is automatically set to ESF. Up to a maximum of 28 DS1's may be assigned to a GR-303 Interface Group. The CRV values are dynamically assigned to a physical DS0 timeslot when a POTS call is in progress. If the DS1 is being assigned to a TR-08 Interface Group, then the shelf must be specified. The first DS1 assigned to a TR-08 Interface Group must be assigned to Shelf A. Additional DS1's may be assigned to either shelf B, C or D. The DS1 framing is automatically set for TR-08, based on the Mode and the Shelf assignment. Only mode 1 is supported. For TR-08 Mode 1: - Shelf A: Set to SLC-96 framing - Shelves B, C, and D: Set to D4 framing Up to 4 DS1's may be configured per TR-08 Interface Group. The DS1 is associated with a shelf; a range of CRV's are supported by each TR-08 shelf according to the table below. TR-08 Mode Shelf CRV Range ---------- -------- ---------1 A 1-24 B 25-48 C 49-72 D 73-96 Note: This table shows the range of CRVs that is supported by each shelf; it does not detail the DS0 mapping to CRV. Consult GR-8 for more information. If the Voice Gateway card is set for 1+1 redundancy, configure the odd-numbered slot, which is the working slot (for example, au-1). The same setting will automatically be applied to the corresponding protection slot (for example,au-2). User Privilege Level: Superuser Required Parameters: slot-igtype-index ig Indicates the specific interface group. - slot is the slot where the Voice Gateway card is inserted. - igtype indicates gr303 or tr08 - index indicates which interface group, specifically. For gr303, index is a value between 1-8 For tr08, index is a value between 1-14 For example: au-1-gr303-1 vg-ds1 ds1aid Page 955 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Identifies the DS1 interface on the Voice Gateway card. - ds1aid = slot-port Optional Parameters: {1-28} ds1map Indicates which logical port to map the actual DS1 port to for the GR-303 Interface group. shelf {a | b | c | d} Indicates the TR-8 shelf assignment. For Mode-I: - a: Shelf A takes POTS channels 1-24 - b: Shelf B takes POTS channels 24-48 - c: Shelf C takes POTS channels 49-72 - d: Shelf D takes POTS channels 73-96 Default Values None Confirmation Message Command completed successfully Example(s) Example 1: (first DS1 on VG to a GR-303 Interface Group) AXS2200> add port vg-ds1 au-1-1 ig au-1-gr303-1 ds1map 1 Command completed successfully Example 2: (additional DS1 to the same GR-303 Interface Group) AXS2200> add port vg-ds1 au-1-2 ig au-1-gr303-1 ds1map 10 Command completed successfully Example 3: (first DS1 on VG to a TR-08 Interface Group) AXS2200> add port vg-ds1 au-1-7 ig au-1-tr08-1 shelf a Command completed successfully Example 4: (additional DS1 to same TR-08 Interface Group) AXS2200> add port vg-ds1 au-1-8 ig au-1-tr08-1 shelf c Command completed successfully Page 956 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Interface group not created Maximum DS1's already assigned to interface group Invalid slot of a protected APS pair - select working slot ds1map is not valid for TR-08 Interface Groups DS1 Interface already assigned ds1map already in use for this IG ds1map 1 must be added to the GR-303 IG first Invalid ds1 Interface Shelf A must be added first before Shelf B,C or D Shelf is not valid for GR-303 Interface Groups Shelf is required ds1map is required Shelf already assigned Invalid ds1map Page 957 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway add port vg-ds1 (ds1aid) t1cas Description Assigns a DS1 logical port to use the T1CAS protocol for connection to the LDS. To set framing, use the "set port ds1" command. If the Voice Gateway card is set for 1+1 redundancy, configure the port in the odd-numbered slot, which is the working slot (for example, au-1). The same setting will automatically be applied to the protection slot in the even-numbered slot (for example, au-2). User Privilege Level: Superuser Required Parameters: t1cas Indicates the interface protocol T1-CAS. vg-ds1 ds1aid Identifies the DS1 interface on the Voice Gateway card. - ds1aid = slot-port Default Values Initial value for framing = esf Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> add port vg-ds1 au-1-1 t1cas Command completed successfully Error Codes DS1 Interface already assigned Voice gateway not equipped Invalid slot of a protected APS pair - select working slot Invalid ds1 Interface Page 958 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway add potschannel eh248 ont (potsport) name (chname) Description Adds a POTS channel to an existing E-H.248 VLAN member. The ONT POTS port is assigned and connected to an existing VLAN member, which will carry signaling and bearer traffic to a remote media gateway as opposed to a VG card local to the OLT. Each ONT type may support a different number of POTS ports. The ONT will, if the user specifies an E-H.248 POTS Channel name, use that string as Termination ID for its communication with the MGC. This will override the internal algorithm of generating a unique termination ID using the term-base ID string coupled with the Port number. Note that since the potschannel name uniqueness validation is only performed against the potschannel name table and not the set of existing internally generated Termination IDs, the user has to be aware of a potential conflict when mixing unspecified mgname settings with explicit settings, which exactly match the internal algorithm. Name conflicts in this scenario can have service impacting consequences at an ONT. User Privilege Level: Superuser Required Parameters: eh248 ont potsport Specifies the ONT POTS port address (AID). It takes the following format: - oltslot-port-channel-"pots"-index (e.g. au-5-1-16-pots-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Optional Parameters: name chname The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash), "_" (underscore), and "/" (forward slash) characters. Default Values Confirmation Message Command completed successfully Example(s) Example 1: Page 959 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway (ONT voice mode is set to eh248 and au-3-1-1-pots has been configured as VLAN member) AXS2200> add potschannel eh248 ont au-3-1-1-pots-1 name mypotschannel Command completed successfully Error Codes EH248 is not configured or supported on ONT VLAN member not found POTS channel is already configured Invalid name ONT Invalid port ONT endpoint already in use Name already in use Page 960 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway add potschannel ont (potsport) vg-voice ({crv | timeslot}) signalcode (signalcode) name (chname) transpath (value) Description Adds a POTS channel to an existing tdm-h248 connection. The ONT POTS port is assigned and connected to - a call reference value (CRV) on a GR-303 or TR-08 interface group, - or to a T0 Timeslot on a T1CAS interface on the voice gateway card. Each ONT type may support a different number of POTS ports. User Privilege Level: Superuser Required Parameters: ont potsport Specifies the ONT POTS port address (AID). It takes the following format: - oltslot-port-channel-"pots"-index (e.g. au-5-1-16-pots-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) vg-voice {crv | timeslot} Specifies the CRV or a T0 Timeslot on the Voice Gateway card. crv takes the format of slot-igtype-index-crv, where: - slot is the slot where the Voice Gateway card is inserted - igtype is gr303 or tr08 - index indicates which interface group and takes a value from 1- 8 for GR-303, or 1-14 for TR-08 interface groups. - crv indicates the call reference value and depends on the type of interface used: - tr08: 1-96 - gr303: 1- maxcrv (default maxcrv is 2048) Note: maxcrv is configurable by GR-303 interface group. For example: au-1-gr303-7-1 and au-1-tr08-1-1 timeslot is the T1CAS timeslot on the VG card which takes the format slot-port-timeslot where: - slot is one of the following au-{1,3} - port is a value from {1-56} - timeslot is a value from {1-24} For example: au-1-1-21 Optional Parameters: transpath value Indicates the transmission path characteristics for the POTS port. Valid values are: - afterring (after ring) - fulltime (full time regardless of on-hook or off-hook) Page 961 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway signalcode signalcode Sets the type of signal coding for the POTS interface. Valid values are: - loopstart (FSO -- valid for FTTH ONTs). Use when the Voice Gateway interfaces are connected to a Voice Switch (FXS) - loopstartfxo (FXO -- not valid for connection to FTTH ONTs). Use for Voice Gateway T1CAS interfaces that are connected to a channel bank. Not valid for GR-303 or TR-08 Interface Groups. - groundstart (not valid for FTTH ONTs) name chname The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash), "_" (underscore), and "/" (forward slash) characters. Default Values signalcode = loopstart admin state = active for the POTS channel transpath = afterring Confirmation Message Command completed successfully Example(s) Example 1: (GR-303 IG CRV, default signalcode and default transpath) AXS2200> add potschannel ont au-3-1-1-pots-1 vg-voice au-1-gr303-7-100 name smith_1 Command completed successfully Example 2: (T1CAS timeslot, default signalcode, no name, default transpath, DS1 physical interfaces to VG) AXS2200> add potschannel ont au-3-1-1-pots-1 vg-voice au-1-10-10 Command completed successfully Example 3: (TR-08 IG CRV, default signalcode, specify transpath) AXS2200> add potschannel ont au-3-1-1-pots-1 vg-voice au-1-tr08-10-25 name smith_1 transpath fulltime Command completed successfully Page 962 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Invalid slot of a protected APS pair - select working slot Invalid crv Insufficient connection bandwidth Interface Group has maximum POTS channels assigned Invalid index POTS channel is already configured Invalid t1cas timeslot Invalid Interface group invalid signalcode Invalid name ONT Invalid port Interface group not created CRV applies to a TR-08 shelf that has not been added to the IG VOIP is configured on ONT tdm-h248 connection must first be established CRV already in use ONT endpoint already in use Timeslot already in use Transpath is not valid for GR-303 interfaces DS1 interface must first be assigned to the Interface Group Name already in use Max number of tdm-h248 CRVs reached (per Voice Gateway card) No voice bandwidth available Page 963 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del ig (slot-igtype-index) Description Used to delete a GR-303 or TR-08 interface group. For GR-303, In order for this command to succeed, the Interface group must be inactive, and all potschannels to the interface group must be deleted. All DS1's will be automatically deleted from the interface group when the command executes. For TR-08, in order for this command to succeed, all potschannel assignments to the interface group must be deleted. All DS1's assigned to the interface group will automatically be deleted when the command executes. To view current use of the interface group, perform the "show ig" command. User Privilege Level: Superuser Required Parameters: slot-igtype-index Indicates the specific interface group. - slot is the slot where the Voice Gateway card is inserted. - igtype indicates gr303 or tr08 - index indicates which interface group, specifically. For gr303, index is a value between 1-8 For tr08, index is a value between 1-14 For example: au-1-gr303-1 Default Values none Confirmation Message This command will delete an interface group. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (Delete a GR-303 Interface Group) AXS2200> del ig au-1-gr303-1 This command will delete an interface group. Do you want to continue? y | n >y Command completed successfully Example 2: (Delete a TR-08 Interface Group) AXS2200> del ig au-1-tr08-1 This command will delete an interface group. Do you want to continue? y | n >y Command completed successfully Page 964 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Invalid for a protection slot of a 1+1 protected group - select working slot Interface Group is in wrong state for this command POTS channel(s) are configured Interface group not created Loopback in effect Invalid Interface group Page 965 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del port vg-ds1 (ds1aid) ig (slot-igtype-index) Description Deletes a DS1 logical interface from the specified GR-303 or TR-08 interface group. For GR-303, in order for this command to succeed, the DS1 must not be configured for use as the primary or standby EOC/TMC channel. For TR-08, All POTS channels must be deleted from the DS1 interface before this command will succeed. The DS1 is associated with a shelf; a range of CRV's are supported by each shelf according to the table below. TR-08 Mode Shelf CRV Range ---------- -------- ---------1 A 1-24 B 25-48 C 49-72 D 73-96 Note: This table shows the range of CRVs that is supported by each shelf; it does not detail the DS0 mapping to CRV. Consult GR-8 for more information. For example, if the DS1 that is configured for Shelf D is deleted from the TR-08 Interface Group, then the Interface Group cannot support the configuration of POTS channels to CRVs 73-96. If the Voice Gateway card is set for 1+1 redundancy, delete the port from the odd-numbered slot, which is the working slot (for example, au-1). User Privilege Level: Superuser Required Parameters: slot-igtype-index ig Indicates the specific interface group. - slot is the slot where the Voice Gateway card is inserted. - igtype indicates gr303 or tr08 - index indicates which interface group, specifically. For gr303, index is a value between 1-8 For tr08, index is a value between 1-14 For example: au-1-gr303-1 vg-ds1 ds1aid Identifies the DS1 interface on the Voice Gateway card. - ds1aid = slot-port Default Values none Confirmation Message This will delete the DS1 from the interface group, affecting calls. Do you want to continue? y | n >y Command completed successfully Example(s) Page 966 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Example 1: (delete a DS1 on the VG from a GR-303 Interface Group) AXS2200> del port vg-ds1 au-1-20 ig au-1-gr303-1 This will delete the DS1 from the interface group, affecting calls. Do you want to continue? y | n >y Command completed successfully Example 2: (delete a DS1 on the VG from a TR-08 Interface Group) AXS2200> del port vg-ds1 au-1-20 ig au-1-tr08-1 This will delete the DS1 from the interface group, affecting calls. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid ds1 Interface Interface group not created DS1 interface used for EOC/TMC secondary path protection DS1 is the primary DS1 in the interface group - cannot delete DS1 interface is not assigned to the interface group Invalid for a port on the protn slot of a 1+1 APS group - use working slot Page 967 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del port vg-ds1 (ds1aid) t1cas Description Deletes a DS1 logical interface from supporting the T1CAS protocol. All POTS channels must be deleted from the DS1 interface before this command will succeed. If the Voice Gateway card is set for 1+1 redundancy, delete the port from the lower slot number in the slot pair. For example, au-1 is the working slot for the AU-1/AU-2 pair. User Privilege Level: Superuser Required Parameters: t1cas Indicates the interface protocol T1-CAS. vg-ds1 ds1aid Identifies the DS1 interface on the Voice Gateway card. - ds1aid = slot-port Default Values none Confirmation Message This will delete the DS1 from supporting t1cas. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del port vg-ds1 au-1-1 t1cas This will delete the DS1 from supporting t1cas. Do you want to continue? y | n >y Command completed successfully Error Codes POTS channel(s) are configured Invalid ds1 Interface Invalid for a port on the protn slot of a 1+1 APS group - use working slot DS1 Interface not configured for t1cas Page 968 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del potschannel conn (connection-name) Description Deletes all POTS channels associated with a tdm-h248 connection. Either the connection must first be set to the inactive state, or all the POTS channels on the connection must be set to admin state inactive. User Privilege Level: Superuser Required Parameters: conn connection-name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Default Values none Confirmation Message This command will delete all POTS channels associated with the connection. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del potschannel conn smith10 This command will delete all POTS channels associated with the connection. Do you want to continue? y | n >y Command completed successfully Error Codes Command applies only to tdm-h248 connections Connection does not exist Connection admin state is required to be inactive POTS channel not configured Page 969 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del potschannel eh248 ont (potsport) Description Deletes the POTS (voice) channel from the E-H.248 VLAN member. The POTS channel must have the admin state set to inactive. User Privilege Level: Superuser Required Parameters: ont potsport Specifies the ONT POTS port address (AID). It takes the following format: - oltslot-port-channel-"pots"-index (e.g. au-5-1-16-pots-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) eh248 Default Values none Confirmation Message This command will delete the POTS (voice) channel from the eh248 VLAN member. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del potschannel ont au-3-1-1-pots-1 This command will delete the POTS (voice) channel from the eh248 VLAN member. Do you want to continue? y | n >y Command completed successfully Error Codes ONT does not exist ONT Invalid port POTS channel not configured POTS channel(s) must first be set to admin state inactive Page 970 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del potschannel ig (slot-igtype-index) Description Deletes all POTS channels for a GR-303 or TR-08 Interface Group. The POTS channels that would be affected must have the admin state set to inactive. User Privilege Level: Superuser Required Parameters: slot-igtype-index ig Indicates the specific interface group. - slot is the slot where the Voice Gateway card is inserted. - igtype indicates gr303 or tr08 - index indicates which interface group, specifically. For gr303, index is a value between 1-8 For tr08, index is a value between 1-14 For example: au-1-gr303-1 Default Values none Confirmation Message This command will delete all POTS channels associated with the interface group. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (GR-303 IG) AXS2200> del potschannel ig au-1-gr303-1 This command will delete all POTS channels associated with the interface group. Do you want to continue? y | n >y Command completed successfully Example 2: (TR-08 IG) AXS2200> del potschannel ig au-1-tr08-1 This command will delete all POTS channels associated with the interface group. Do you want to continue? y | n >y Command completed successfully Error Codes Interface group not created POTS channel not configured Invalid slot Invalid for the protection slot of a 1+1 protected group - select working slot POTS channel(s) must first be set to admin state inactive Page 971 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 972 Voice Gateway AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del potschannel ont (potsport) Description Deletes the POTS (voice) channel from the tdm-h248 connection. The POTS channel must have the admin state set to inactive. User Privilege Level: Superuser Required Parameters: ont potsport Specifies the ONT POTS port address (AID). It takes the following format: - oltslot-port-channel-"pots"-index (e.g. au-5-1-16-pots-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message This command will delete the POTS (voice) channel from the tdm-h248 connection. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> del potschannel ont au-3-1-1-pots-1 This command will delete the POTS (voice) channel from the tdm-h248 connection. Do you want to continue? y | n >y Command completed successfully Error Codes ONT does not exist ONT Invalid port POTS channel not configured POTS channel(s) must first be set to admin state inactive Page 973 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del potschannel t1cas (ds1aid) Description Deletes all POTS channels configured for a DS1 T1CAS Interface. The POTS channels that would be affected must have the admin state set to inactive. User Privilege Level: Superuser Required Parameters: t1cas ds1aid Identifies the DS1 interface on the Voice Gateway card. - ds1aid = slot-port Default Values none Confirmation Message This command will delete all POTS channels associated with the interface. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (au-1-1 = ds1 #1 on the Voice Gateway card au-1) AXS2200> del potschannel t1cas au-1-1 This command will delete all POTS channels associated with the interface. Do you want to continue? y | n >y Command completed successfully Error Codes DS1 Interface not configured for t1cas POTS channel(s) must first be set to admin state inactive Invalid for a protection slot of a 1+1 protected group - select working slot POTS channel not configured Invalid slot Page 974 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del potschannel vg-voice ({crv | timeslot}) Description Deletes the POTS (voice) channel from the tdm-h248 connection. The POTS channel must have the admin state set to inactive. User Privilege Level: Superuser Required Parameters: vg-voice {crv | timeslot} Specifies the CRV or a T0 Timeslot on the Voice Gateway card. crv takes the format of slot-igtype-index-crv, where: - slot is the slot where the Voice Gateway card is inserted - igtype is gr303 or tr08 - index indicates which interface group and takes a value from 1- 8 for GR-303, or 1-14 for TR-08 interface groups. - crv indicates the call reference value and depends on the type of interface used: - tr08: 1-96 - gr303: 1- maxcrv (default maxcrv is 2048) Note: maxcrv is configurable by GR-303 interface group. For example: au-1-gr303-7-1 and au-1-tr08-1-1 timeslot is the T1CAS timeslot on the VG card which takes the format slot-port-timeslot where: - slot is one of the following au-{1,3} - port is a value from {1-56} - timeslot is a value from {1-24} For example: au-1-1-21 Default Values none Confirmation Message This command will delete the POTS (voice) channel from the tdm-h248 connection. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (GR-303 IG CRV) AXS2200> del potschannel vg-voice au-1-gr303-2-100 This command will delete the POTS (voice) channel from the tdm-h248 connection. Do you want to continue? y | n >y Command completed successfully Example 2: (TR-08 IG CRV) AXS2200> del potschannel vg-voice au-1-tr08-2-100 Page 975 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway This command will delete the POTS (voice) channel from the tdm-h248 connection. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid for the protection slot of a 1+1 protected group - select working slot Invalid crv Invalid slot POTS channel not configured Interface group not created POTS channel(s) must first be set to admin state inactive Invalid Interface group Invalid t1cas timeslot Page 976 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway del profile ont-eh248config name (name) Description This command deletes the entry in the ont-h248config Profile Table identified by the name. Only entries that are not in use may be deleted. Note: Neither default entries that are in use nor qbdef entries may be deleted. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message Command completed successfully Example(s) Example: AXS2200> del profile ont-eh248config name h248prof Command completed successfully Error Codes Default profiles cannot be deleted Profile in use Profile name not found in Profile Table qbdef profiles cannot be deleted Page 977 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set ig (slot-igtype-index) name (name) Description This command defines a new GR-303 or TR-08 interface group on the voice gateway card, or is used to change the name for a pre-existing Interface Group. If the Voice Gateway card is set for 1+1 redundancy, configure the odd-numbered slot, which is the working slot (for example, au-1). The same setting will automatically be applied to the corresponding protection slot (for example, au-2). Up to 8 GR-303 Interface groups on a Voice Gateway card are supported. Likewise, up to 14 TR-08 Interface groups on a Voice Gateway card are supported. User Privilege Level: Superuser Required Parameters: slot-igtype-index Indicates the specific interface group. - slot is the slot where the Voice Gateway card is inserted. - igtype indicates gr303 or tr08 - index indicates which interface group, specifically. For gr303, index is a value between 1-8 For tr08, index is a value between 1-14 For example: au-1-gr303-1 Optional Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values name = ig-slot-igtype-index. For example: ig-au-1-gr303-1 would be the name assigned by default for a GR-303 IG index 1 on slot au-1. Confirmation Message Command completed successfully Example(s) Example 1: (New GR-303 Interface Group) AXS2200> set ig au-1-gr303-1 name customer1234 Command completed successfully Example 2: (Change the name for a pre-existing GR-303 Interface Group) AXS2200> set ig au-1-gr303-1 name xyzcorporation Command completed successfully Example 3: (Define a new TR-08 Interface Group) AXS2200> set ig au-1-tr08-1 name xyzcorporation Command completed successfully Page 978 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Invalid slot Invalid index Voice gateway not equipped Invalid name Name already in use Invalid for a protection slot of a 1+1 protected group - select working slot Index already in use Page 979 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set ig-config (slot-gr303-index) secondary-ds1 (ds1aid) maxcrv (maxcrv) switch ({gtd5 | other}) Description This command configures the parameters for a pre-existing interface group. The Interface Group must be disabled first. Any of the optional parameters that are not provided in the command line input remain at the prior setting. The first DS1 added to the Interface Group (ds1map = 1) will automatically be selected for the primary EOC and TMC channels. The Secondary-DS1 is required to be provided in order for EOC or TMC protection switches to occur. The same DS1 will be used for the secondary path for both EOC and TMC channels. To perform TMC or EOC path protection switching, use the "set ig sw" CLI command. The user must set the adminstate to active in order to carry calls. To change the name, use the "set ig" command. If the Voice Gateway card is set for 1+1 redundancy, configure the odd-numbered slot, which is the working slot (for example, au-1). The same setting will automatically be applied to the corresponding protection slot (for example, au-2). User Privilege Level: Superuser Required Parameters: slot-gr303-index Indicates the specific GR-303 interface group. - slot is the slot where the Voice Gateway card is inserted. - gr303 is used to indicate it is a gr303 interface group. - index indicates which interface group, specifically, and takes a value between 1-8 For example: au-1-gr303-1 Optional Parameters: maxcrv maxcrv Selects the maximum number of call reference values (CRVs) allowed for the interface group. Valid values are from 1-2048. switch {gtd5 | other} Switch type that this IG is connected to. secondary-ds1 ds1aid Indicates the DS1 on the VG to use as the secondary link for the TMC and the EOC, if path protection is selected for either channels. - ds1aid = slot-port Default Values Page 980 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway TMC-protn = allow (initial value) - requires a secondary DS1 to be assigned before switches can actually occur EOC-protn = allow (initial value) - requires a secondary DS1 to be assigned before switches can actually occur Secondary-DS1 = N/A (initial value) MaxCRV=2048 switch= other flow-through provisioning = off (not user-settable) Confirmation Message This command will affect the settings for the Interface Group. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (all settings are provided, ds1 interfaces on the VG card) AXS2200> set ig-config au-1-gr303-1 secondary-ds1 au-1-2 maxcrv 2000 switch gtd5 This command will affect the settings for the Interface Group. Do you want to continue? y | n >y Command completed successfully Example 2: (Change maxcrv) AXS2200> set ig-config au-1-gr303-1 maxcrv 1000 This command will affect the settings for the Interface Group. Do you want to continue? y | n >y Command completed successfully Error Codes CRVs already in use exceed requested maximum CRV Invalid slot Interface Group is in wrong state for this command Invalid crv Invalid index Invalid name Primary DS1 cannot be used for secondary Primary DS1 has not yet been added to the interface group Invalid ds1 Interface Secondary DS1 not in interface group Voice gateway not equipped Valid only for GR-303 Interface Groups Invalid for a protection slot of a 1+1 protected group - select working slot Remove active EOC/TMC from secondary DS1 before changing the secondary DS1 Page 981 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set ig-config (slot-gr303-index) state ({active | inactive}) Description Activates or deactivates the selected GR-303 Interface Group. The Interface Group must be in the inactive state in order to delete a DS1 interface from supporting it, or to change any GR-303 IG configuration parameters. When the state is inactive, no voice calls will be connected for the specific Interface Group. If the Voice Gateway card is set for 1+1 redundancy, configure the odd-numbered slot, which is the working slot (for example, au-1). The same setting will automatically be applied to the corresponding protection slot (for example, au-2). User Privilege Level: Superuser Required Parameters: state {active | inactive} Sets the state to active or inactive. slot-gr303-index Indicates the specific GR-303 interface group. - slot is the slot where the Voice Gateway card is inserted. - gr303 is used to indicate it is a gr303 interface group. - index indicates which interface group, specifically, and takes a value between 1-8 For example: au-1-gr303-1 Default Values none (upon IG creation, the adminstate is set to inactive by default) Confirmation Message This will affect services carried by the interface group. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ig-config au-1-gr303-1 state inactive This will affect services carried by the interface group. Do you want to continue? Y | n >y Command completed successfully Error Codes DS1 interface is not assigned to the interface group Invalid for a protection slot of a 1+1 protected group - select working slot Valid only for GR-303 Interface Groups Interface group not created Invalid index Voice gateway not equipped Page 982 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set ig-sw (slot-gr303-index) type ({tmc-manual | tmc-force | eoc-manual | eoc-force}) Description Executes a GR-303 interface group TMC or EOC path protection switch. The protection switching is a transient operation (i.e. it does not have to be cleared). This command is valid only when the TMC or EOC protection switch configuration is set to allow for this interface group. To view the configuration settings, and to determine the currently active TMC or EOC path, consult "show ig". If the Voice Gateway card is set for 1+1 redundancy, configure the odd-numbered slot, which is the working slot (for example, au-1). The same setting will automatically be applied to the corresponding protection slot (for example, au-2). User Privilege Level: Superuser Required Parameters: slot-gr303-index Indicates the specific GR-303 interface group. - slot is the slot where the Voice Gateway card is inserted. - gr303 is used to indicate it is a gr303 interface group. - index indicates which interface group, specifically, and takes a value between 1-8 For example: au-1-gr303-1 {tmc-manual | tmc-force | eoc-manual | eoc-force} type Executes a GR-303 path protection switch: - tmc-manual: requests a change in active TMC path from LDS - tmc-force: forces a change in active TMC path - eoc-manual: requests a change in active EOC path from LDS - eoc-force: forces a change in active EOC path Default Values none Confirmation Message This command will switch the active path for the GR-303 TMC or EOC channel. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set ig sw au-1-gr303-1 type tmc-manual This command will switch the active path for the GR-303 TMC or EOC channel. Do you want to continue? y | n >y Command completed successfully Page 983 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Interface Group is in wrong state for this command Valid only for GR-303 Interface Groups IDT failed PPS switch request IDT no response to PPS request Invalid equipment state for request Interface was stopped while PPS in progress Invalid for a protection slot of a 1+1 protected group - select working slot Requested path is already active Near end requested switchover but no reply from peer Standby Channel is out of service Switching is inhibited Near end requested switchover but peer replies failed DS1 Secondary not provisioned Page 984 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set ont id (ontaddress) eh248config ont-eh248config (name) mgname (name) Description This command allows to assign the ont-h248config profile to the specified ONT at ontaddress and/or provide a customer selected mgname instead of using the system-generated one. Data will be downloaded via OMCI to the ONT and used to determine H.248 protocol behavior as well as provide the primary (and, as an option, the secondary) MGC identity. This command is only applicable to an ONT in extended H.248 mode (i.e. the voice mode stting was configured as eh248. mgname is an optional parameter, which can be set in order to override automatic generation of this identifier by the system using the current ONT name. The validation rules for mgname are such that it can be 1. The Current ONT Name 2. a numeric IP address (n.n.n.n where n = 0 - 255) 3. a host or domain name of a maximum length of 80 characters and it consists of one or more labels separated by dots - The character set for labels includes alpha-numeric, period/dot, hyphen/dash => [a-zA-Z0-9] . - Individual labels are of size 1-63 characters; they must start with a letter, cannot end with a hyphen, and are case insensitive. User Privilege Level: Superuser Required Parameters: eh248config ontaddress id Identifies the ONT by address (e.g. au-3-4-16). Optional Parameters: ont-eh248config mgname name name The user-defined Media gateway name can be a numeric IP address, an FQDN or domain name of up to 80 characters in length. Also, the user is able to specify the ONT name to be used as MG name and entered via this attribute. This value is optional and, if not used, the MG software will use the ONT name as identifier. Page 985 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Default Values Confirmation Message This will affect services on the ONT. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (set profile and mgname) AXS2200> set ont id au-5-1-3 h248config ont-h248config myh248profile mgname geo987 This will affect services on the ONT. Do you want to continue? y | n >y Command completed successfully Example 2: (set mgname only) AXS2200> set ont id au-5-1-3 h248config mgname medgwid This will affect services on the ONT. Do you want to continue? y | n >y Command completed successfully Error Codes Invalid ONT ONT does not exist Profile name not found in Profile Table EH248 is not configured or supported on ONT At least one attribute is required to be set Invalid name Page 986 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set potschannel eh248 ont (potsport) state ({active | inactive}) Description Modifies the state for a selected ONT POTS Port channel in extended H.248 mode. The POTS channel must be set to inactive before deleting it. User Privilege Level: Superuser Required Parameters: eh248 state {active | inactive} Sets the state to active or inactive. ont potsport Specifies the ONT POTS port address (AID). It takes the following format: - oltslot-port-channel-"pots"-index (e.g. au-5-1-16-pots-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values active Confirmation Message This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: AXS2200> set potschannel eh248 ont au-7-4-2-pots-1 state inactive This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Error Codes POTS channel not configured Invalid voice mode ONT Invalid port Page 987 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set potschannel vg-voice ({crv | timeslot}) state ({active | inactive}) transpath (value) Description Modifies the POTS channel state and/or the transmission path method on the Voice Gateway. The POTS channel must be set to inactive before deleting it. User Privilege Level: Superuser Required Parameters: {crv | timeslot} vg-voice Specifies the CRV or a T0 Timeslot on the Voice Gateway card. crv takes the format of slot-igtype-index-crv, where: - slot is the slot where the Voice Gateway card is inserted - igtype is gr303 or tr08 - index indicates which interface group and takes a value from 1- 8 for GR-303, or 1-14 for TR-08 interface groups. - crv indicates the call reference value and depends on the type of interface used: - tr08: 1-96 - gr303: 1- maxcrv (default maxcrv is 2048) Note: maxcrv is configurable by GR-303 interface group. For example: au-1-gr303-7-1 and au-1-tr08-1-1 timeslot is the T1CAS timeslot on the VG card which takes the format slot-port-timeslot where: - slot is one of the following au-{1,3} - port is a value from {1-56} - timeslot is a value from {1-24} For example: au-1-1-21 Optional Parameters: state {active | inactive} Sets the state to active, or inactive. transpath value Indicates the transmission path characteristics for the POTS port. Valid values are: - afterring (after ring) - fulltime (full time regardless of on-hook or off-hook) Default Values unspecified parameters remain unchanged Confirmation Message Page 988 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Example(s) Example 1: (GR-303 CRV, set state only) AXS2200> set potschannel vg-voice au-1-gr303-1-100 state inactive This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Example 2: (TR-08 CRV, set state only) AXS2200> set potschannel vg-voice au-1-tr08-1-1 state inactive This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Example 3: (Timeslot, DS1 interfaces on the VG card, set state only) AXS2200> set potschannel vg-voice au-1-1-1 state inactive This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Example 4: (Timeslot, DS1 physical interfaces to VG card, set state and transpath) AXS2200> set potschannel vg-voice au-1-1-1 state active transpath fulltime This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Example 5: (Timeslot, DS1 physical interfaces to VG card, set transpath only) AXS2200> set potschannel vg-voice au-1-1-1 transpath fulltime This will affect service on the POTS line. Do you want to continue? y | n >y Command completed successfully Page 989 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Invalid crv Invalid Interface group Invalid t1cas timeslot POTS channel not configured Transpath is not valid for GR-303 interfaces At least one attribute is required to be set Invalid for a protection slot of a 1+1 protected group - select working slot Page 990 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set profile ont-eh248config msg (format) trans-hist (timer) term-id-base (id) srv-change (delay) send (delay) max-wait (delay) init-retrans (to) min-retrans (to) max-retrans (to) retr-window (win) Description This command creates the profile with External H.248 protocol configuration data. Note that only profile name and primary MGC are mandatory parameters. User Privilege Level: Superuser Optional Parameters: msg format This defines the H.248 message format. Options are longtext, shorttext or binary. term-id-base id This is the string that is used as a prefix for physical termination Ids. Physical termination ID is represented by this prefix concatenated with port number. For example, assuming physical termination id base string is "pots", POTS port 1 will have a termination id as "pots1". Length: 0-25 bytes delay srv-change This is the amount of time MG waits before sending a SeviceChange message to the MGC when the termination goes out-of-service. For "Graceful" only, a zero delay means the MG must not set ServiceState "OutOfService" until the termination is in the NULL Context. Valid Range: 0 - 65535 seconds send delay This is the amount of time the MG will wait before sending a transaction to allow other transactions to be sent in the same message. Valid Range: 0 - 65535 milliseconds max-wait delay When the Media Gateway is started or restarted it waits for a random amount of time between zero and MWD before it issues ServiceChange transaction to the MGC. This is to protect MGC against restart avalanches. Valid Range: 0 - 65535 seconds init-retrans to Sets the initial retransmission timeout for the MG. This is the retransmission timeout that will be used when the MG has no round trip time information for a given remote entity. Valid Range: 0 - 65535 seconds min-retrans to Sets the lower bound for the retransmission timeout. Page 991 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Valid Range: 0 - 65535 seconds max-retrans to Sets the upper bound for the retransmission timeout Valid Range: 0 - 65535 seconds retr-window win Sets the maximum amount of time after the initial transmission of a message that a retransmission of that message will be attempted. This is the value referred to as T-MAX in the H.248 specification. Valid Range: 0 - 65535 seconds trans-hist timer Sets the Stack's transaction history timer. This is the amount of time that responses sent are kept track of by the Stack in order to prevent incoming commands from being executed multiple times. This is the value referred to as LONG-TIMER in the H.248 specification. Default value shall be 30 seconds. It is important that two communicating H.248 entities agree on the values in use for the retransmission window and transaction history timer. The transaction history timer of one entity should be set to a value at least as large as the retransmission window of the other entity plus the maximum propagation delay in the network. Valid Range: 0 - 65535 seconds Default Values prim-mgc=empty prim-mgc-name=empty prim-mgc-p=0 sec-mgc=empty sec-mgc-name=empty sec-mgc-p=0 h248vers=1 ssw=empty mgsvcprof=empty mgsvcprofvers=1 msg=longtext trans-hist=30 term-id-base="pots/" srv-change=1 send=0 max-wait=30 init-retrans=10 min-retrans=1 max-retrans=4 retr-window=25 Confirmation Message Example(s) Page 992 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Example 1: AXS2200> set profile ont-eh248config name myprofile prim-mgc 10.13.198.2 sec-msg 10.13.198.14 ssw frde Command completed successfully Error Codes Invalid H.248 Version Invalid MG Service Profile Invalid MG Service Profile Version Invalid Primary MGC Name Invalid Secondary MGC Name Invalid port range Invalid Initial Retransmission Timeout Invalid Maximum Retransmission Timeout Invalid Maximum Waiting Delay Invalid Message Format Invalid Minimum Retransmission Timeout Invalid Physical Termination ID Base Invalid Primary MGC Invalid Retransmission Window Invalid Secondary MGC Invalid Send Delay Invalid Service Change Delay Invalid Softswitch Type Invalid Transaction History Timer Maximum number of allowed profiles exceeded Name already in use Min. Retr. Timer cannot be larger than Max. Retr. Timer Page 993 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set profile ont-eh248config default-name (name) Description This command designates the default profile with H.248 protocol configuration data. User Privilege Level: Superuser Required Parameters: default-name name Selects the name of the profile to use as the default. Default Values Confirmation Message This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully. Example(s) Example 1: AXS2200> set profile ont-eh248config default-name myeh248prof This will affect new ont settings. Do you want to continue? y|n >y Command completed successfully Error Codes Profile name not found in Profile Table Page 994 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway set profile ont-eh248config name (name) prim-mgc (host) prim-mgc-p (port) prim-mgc-name (name) sec-mgc (host) sec-mgc-p (port) sec-mgc-name (name) h248vers (num) ssw (type) mgsvcprof (label) mgsvcprofvers (vers) Description This command creates the profile with External H.248 protocol configuration data. Note that only profile name and primary MGC are mandatory parameters. User Privilege Level: Superuser Required Parameters: name name The user-defined name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. prim-mgc host IP address or FQDN of the Primary MGC Server Optional Parameters: type ssw This attribute identifies the gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in ANSI T1.220. A value of four null characters indicates no particular vendor. port prim-mgc-p The port is optional and defaults to 2944 for text message formats and 2955 for binary message formats. Default value shall be zero to indicate that the port will be automatically picked based on the message format. Range: 0 - 65535 name prim-mgc-name String describing the Primary MGC. Allowed are alphanumeric characters, the dot ".", dash "-", underscore "_" and forward slash "/". Maximum Size = 80 characters sec-mgc host IP address or FQDN of the Secondary MGC Server sec-mgc-p port The port is optional and defaults to 2944 for text message formats and 2955 for binary message formats. Default value shall be zero to indicate that the port will be automatically picked based on the message format. Range: 0 - 65535 sec-mgc-name Page 995 name AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway String describing the Secondary MGC Allowed are alphanumeric characters, the dot ".", dash "-", underscore "_" and forward slash "/" special characters. Maximum Size = 80 characters h248vers num Integer number describing the H.248 profile version used. [1-255] mgsvcprof label String describing the MG Service Profile Allowed are alphanumeric characters, the dot ".", dash "-", underscore "_" and forward slash "/" special characters. Maximum Size = 80 characters mgsvcprofvers vers Integer number describing the MG Service profile version [1-255] Default Values prim-mgc=empty prim-mgc-name=empty prim-mgc-p=0 sec-mgc=empty sec-mgc-name=empty sec-mgc-p=0 h248vers=1 ssw=empty mgsvcprof=empty mgsvcprofvers=1 msg=longtext trans-hist=30 term-id-base="pots/" srv-change=1 send=0 max-wait=30 init-retrans=10 min-retrans=1 max-retrans=4 retr-window=25 Confirmation Message Example(s) Example 1: AXS2200> set profile ont-eh248config name myprofile prim-mgc 10.13.198.2 sec-msg 10.13.198.14 ssw frde Command completed successfully Page 996 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Min. Retr. Timer cannot be larger than Max. Retr. Timer Invalid H.248 Version Invalid MG Service Profile Invalid MG Service Profile Version Invalid Primary MGC Name Invalid Secondary MGC Name Invalid port range Invalid Initial Retransmission Timeout Invalid Maximum Retransmission Timeout Invalid Maximum Waiting Delay Invalid Message Format Invalid Minimum Retransmission Timeout Invalid Physical Termination ID Base Invalid Primary MGC Invalid Retransmission Window Invalid Secondary MGC Invalid Send Delay Invalid Service Change Delay Invalid Softswitch Type Invalid Transaction History Timer Maximum number of allowed profiles exceeded Name already in use Invalid - Secondary MGC attributes require specification of Host Page 997 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show ig index (slot-igtype-index) Description Displays the details of the Interface Group. The report contents will be different depending on whether the Interface Group is set for GR-303 or TR-08. For a GR-303 interface group, the report will display: - Interface Group Type: GR-303 - Index: 1-8 - Name: User configured name - AdminState: active, inactive - OperState: up, down - Maximum retransmission: 3 (not user settable) - Maximum outstanding Iframes: 7 (not user settable) - Switch: gtd5, other - TMC/EOC Primary DS1: 1 (DS1 AID) - TMC/EOC Secondary DS1: ds1map (DS1 AID), or n/a if protection set to disable - TMC Protection: allow - TMC Active Channel: established on primary, established on secondary or not established - TMC Standby Channel: established on primary, established on secondary or not established - EOC Protection: allow - EOC Active Channel: established on primary, established on secondary or not established - EOC Standby Channel: established on primary, established on secondary or not established - Timer values: (not user settable) TMC: T200, T203, T303, T396 EOC: T200, T203 - Total number of DS1's that have been added to the interface group. List of DS1's that have been added, listed in order of DS1 mapping, plus number of active calls for each - Max CRV: 1-2048 - Total number of CRV's that have been configured Summarized list of CRV's that have been configured Summarized list of CRV's that are available For a TR-08 Interface Group, the following details are shown: - Interface Group Type: TR-08 - Index: 1-14 - Name: User configured name - Mode: 1 (not configurable) - For each shelf: -The assigned DS1 interface, or "n/a" if none has been assigned -The DS1 interface operating status (up, down) or a dash (-) if no DS1 assigned. -The current LDS alarm state (none, MN, MJ or DL) or a dash (-) if no DS1 assigned. DL indicates a failure of the ESF FDL link. -The number of active calls or a dash (-) if no DS1 assigned. - Max Lines/CRV: 96 - Total number of CRV's that have been configured Summarized list of CRV's that have been configured Summarized list of CRV's that are available If the Voice Gateway card is set for 1+1 redundancy, select the odd-numbered slot, which is the working slot (for example, au-1). User Privilege Level: Page 998 Operator AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Required Parameters: slot-igtype-index index Indicates the specific interface group. - slot is the slot where the Voice Gateway card is inserted. - igtype indicates gr303 or tr08 - index indicates which interface group, specifically. For gr303, index is a value between 1-8 For tr08, index is a value between 1-14 For example: au-1-gr303-1 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (GR-303 Interface Group, DS1 physical interfaces to VG card) AXS2200> show ig index au-1-gr303-1 =============================================================================== GR-303 Interface Group Report DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== Slot: AU-1 Interface Group Type: GR-303 Index: 1 Name: NeighborhoodX AdminState: active OperState: up Maximum Retransmission: 3 Maximum Outstanding IFrames: 7 Switch: gtd5 TMC/EOC Primary DS1: 1 (au-1-1) TMC/EOC Secondary DS1: 3 (au-1-2) TMC Protection: allow TMC Active Channel: established on primary TMC Standby Channel: established on secondary EOC Protection: allow EOC Active Channel: established on primary EOC Standby Channel: established on secondary TMC TMC TMC TMC T200 T203 T303 T396 Timer Timer Timer Timer (ms): (ms): (ms): (ms): 150 30000 700 14700 EOC T200 Timer (ms): 150 EOC T203 Timer (ms): 30000 Total number of added DS1's: 4 ds1map (ds1aid) number of active calls ------ ---------- ---------------------1 au-1-1 10 2 au-1-2 5 3 au-1-4 4 4 au-1-10 23 Max CRV: 2048 Total number of CRV's configured: 62 CRV's configured: 1-25, 27, 30, 40-75 CRV's available: 26, 28-29, 31-39, 76-2048 Page 999 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway =============================================================================== Command completed successfully Example 2: (TR-08 Interface Group, DS1 physical interfaces to VG card) AXS2200> show ig index au-1-tr08-1 =============================================================================== TR-08 Interface Group Report DATE: 07/28/2004 TIME: 20:15:40 =============================================================================== Slot: AU-1 Interface Group Type: TR-08 Index: 1 Name: NeighborhoodY Mode: 1 Shelf ----A: B: C: D: DS1 ---------au-1-1 au-1-2 au-1-14 n/a OperState --------up up up - LDS Alarm State --------------none MN none - Number of Active Calls ---------------------22 5 16 - Max Lines/CRV: 96 Total number of CRV's configured: 62 CRV's configured: 1-25, 27, 30, 40-75 CRV's available: 26, 28-29, 31-39, 76-96 =============================================================================== Command completed successfully Error Codes Index not configured for this interface group Invalid for a protection slot of a 1+1 protected group - select working slot Interface group not created Invalid index Page 1,000 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show ig gr303summary slot (slot) Description Displays a summary of all the configured GR-303 interface groups for the Voice Gateway card in the slot. For each interface group, the Index, AdminState (active, inactive), and user-defined name are provided. If the Voice Gateway card is set for 1+1 redundancy, select the odd-numbered slot, which is the working slot (for example, au-1). User Privilege Level: Operator Required Parameters: slot slot Indicates the slot/card. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show ig gr303summary slot au-1 =============================================================================== GR-303 Interface Group Summary Report DATE: 07/28/2004 TIME: 20:15:40 =============================================================================== Slot: AU-1 Index ----1 2 3 4 5 8 AdminState ---------active inactive active active active active Name -------------------NeighborhoodX NeighborhoodY NeighborhoodZ Westsideapts Eastsideapts Southsideapts =============================================================================== Command completed successfully Error Codes Invalid for a protection slot of a 1+1 protected group - select working slot Invalid slot Interface group not created Voice gateway not equipped Page 1,001 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show ig tr08summary slot (slot) Description Shows a summary report of all configured TR-08 interface groups for the Voice Gateway card in the slot. Displayed information includes: - Index - Name - Mode (not configurable) - Number of Shelves configured (0-4) If the Voice Gateway card is set for 1+1 redundancy, select the odd-numbered slot, which is the working slot (for example, au-1). User Privilege Level: Operator Required Parameters: slot slot Indicates the slot/card. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show ig tr08summary slot au-1 =============================================================================== TR-08 Interface Group Summary Report DATE: 07/28/2004 TIME: 20:15:40 =============================================================================== Slot: AU-1 Index ----1 2 10 Name -------------------NeighborhoodX NeighborhoodG NeighborhoodABC Mode ---1 1 1 No. Shelves ----------4 4 1 =============================================================================== Command completed successfully Error Codes Invalid for a protection slot of a 1+1 protected group - select working slot Voice gateway not equipped Invalid slot Interface group not created Page 1,002 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show ont eh248 (ontaddress) Description This command displays the External H.248 configuration for a specified ONT. The report always includes these fields: - ONT Name - ONT Serial Number: The serial number of the ONT chassis, or pre-prov (if the ONT is pre-provisioned, and does not have a serial number assigned yet). - ONT Channel on the PON - ONT Address (AID) The following H.248 information applies to the ONT: - MG name: Name used as MG Identifier - Service Type: { Unspecified, Residential User, PBX, payphone } - IP Address Mode: {static | dhcp} - DHCP connStatus: { none (static IP), none(incomplete configuration), connected, failed(reason) } none (incomplete configuration) = incomplete bootstrap data, static IP mode, or trying to contact the DHCP server connected = received IP address and other required information from the DHCP failed(reason) = ICMP error, malformed response, inadequate info response, timeout - Active MGC: - IP address: Current IP address - H.248 MAC address: MAC address used for H.248 service - Mask: Subnet Mask - Gateway: Default Gateway - Primary DNS: IP address for the primary DNS - Secondary DNS: IP address for the secondary DNS - ont-h248Config Profile: - Primary MGC - Primary MGC Port - Primary MGC name - Secondary MGC - Secondary MGC Port - Secondary MGC Name - Softswitch Type - H.248 Version - MG Service Profile - MG Service Profile Version - Message Format - Transaction History Timer [s] - Termination Base ID - Service Change Delay [s] - Send Delay [ms] - Maximum Wait Delay [s] - Initial Retrans. Timeout [s] - Minimum Retrans. Timeout [s] - Maximum Retrans. Timeout [s] - Retransmission Window [s] User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: Page 1,003 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values n/a Confirmation Message Example(s) Example 1: AXS2200> show ont eh248 au-3-1-16 =============================================================================== ONT E-H.248 REPORT DATE: 08/17/2009 TIME: 16:08:22 =============================================================================== Name: alpha SN: MRCC12345678 ONT Channel on the PON: 16 ONT Address (AID): au-3-1-16 MG name: Service Type: IP Address Mode: DHCP connStatus: Active MGC: IP address: H.248 MAC address: Mask: Gateway: Primary DNS: Secondary DNS: ont-h248Config Profile: Primary MGC: Primary MGC Port Number: Primary MGC Name: Secondary MGC: Secondary MGC Port Number: Secondary MGC Name: Softswitch Type: H.248 Version: MG Service Profile: MG Service Profile Version: Message Format: Transaction History Timer: Termination Base ID: Service Change Delay: Send Delay: Maximum Wait Delay: Initial Retrans. Timeout: Minimum Retrans. Timeout: Maximum Retrans. Timeout: Retransmission Window: Zardoz Residential User dhcp connected 10.0.112.98 10.13.212.10 00:78:33:A3:6A:FF 255.255.255.0 10.13.212.1 10.13.193.1 10.13.193.2 myh248prof 10.13.199.3 0 Stew 0 Ethan ACME 1 AnalogResGW 1 longtext 27 pots 1 0 30 10 1 4 25 =============================================================================== Command completed successfully Page 1,004 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes EH248 is not configured or supported on ONT Invalid ONT ONT does not exist Page 1,005 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show port vg-ds1 (ds1aid) Description Shows the DS1 logical port settings for an individual DS1 logical port, or for all DS1 logical ports on the Voice gateway card. - AID: Provides the AID of the DS1 logical port. If the voice gateway card is equipment protected, then first the port in the working slot is shown, followed by the port in the protection slot. For example: au-1-1 /au-2-1 (DS1 physical interfaces to VG card) - Protocol: gr303, tr08, or t1cas. If not assigned to any protocol, then shows "-". - IG Index: shows the index of the Interface Group. If the DS1 is set to T1CAS or not configured, this field will show a dash (-). - Shelf/DS1map: shows the Shelf for TR-08 IG, or the DS1 mapping for a GR-303 IG. If the DS1 is set to T1CAS or not configured, this field will show a dash (-). - Oper State: shows the operating state of the DS1 interface (up, down) - Loopback: shows the loopback status of the local DS1 interface: - payload (near end configuration of the payload loopback) - line (near end configuration of the line loopback) - fe-payload (far end configuration of the payload loopback) - fe-line (far end configuration of the line loopback) If no loopback is set for the logical interface, then a dash is shown (-). - Active Calls: shows the number of currently active calls for the DS1 interface. If the DS1 is not assigned to any GR-303, TR-08 or T1CAS interface, then a dash (-) is shown. User Privilege Level: Operator Required Parameters: vg-ds1 ds1aid Identifies the DS1 interface on the Voice Gateway card. - ds1aid = slot-port Default Values Once assigned to an IG, admin state = enable by default When not assigned to an IG, the admin state = disable by default Confirmation Message Command completed successfully Example(s) Example 1: (all DS1 logical ports for a Voice Gateway card configured for 1+1 redundancy, DS1 physical interfaces) AXS2200> show port vg-ds1 au-1 =============================================================================== Voice Gateway DS1 Port Report DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== IG Shelf/ Oper Active Page 1,006 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA AID -------------------au-1-1 /au-2-1 au-1-2 /au-2-2 au-1-3 /au-2-3 au-1-4 /au-2-4 au-1-5 /au-2-5 au-1-6 /au-2-6 au-1-7 /au-2-7 au-1-8 /au-2-8 au-1-9 /au-2-9 au-1-10 /au-2-10 au-1-11 /au-2-11 au-1-12 /au-2-12 au-1-13 /au-2-13 au-1-14 /au-2-14 au-1-15 /au-2-15 au-1-16 /au-2-16 au-1-17 /au-2-17 au-1-18 /au-2-18 au-1-19 /au-2-19 au-1-20 /au-2-20 au-1-21 /au-2-21 au-1-22 /au-2-22 au-1-23 /au-2-23 au-1-24 /au-2-24 au-1-25 /au-2-25 au-1-26 /au-2-26 au-1-27 /au-2-27 au-1-28 /au-2-28 au-1-29 /au-2-29 au-1-30 /au-2-30 au-1-31 /au-2-31 au-1-32 /au-2-32 au-1-33 /au-2-33 au-1-34 /au-2-34 au-1-35 /au-2-35 au-1-36 /au-2-36 au-1-37 /au-2-37 au-1-38 /au-2-38 au-1-39 /au-2-39 au-1-40 /au-2-40 au-1-41 /au-2-41 au-1-42 /au-2-42 au-1-43 /au-2-43 au-1-44 /au-2-44 au-1-45 /au-2-45 au-1-46 /au-2-46 au-1-47 /au-2-47 au-1-48 /au-2-48 au-1-49 /au-2-49 au-1-50 /au-2-50 au-1-51 /au-2-51 au-1-52 /au-2-52 au-1-53 /au-2-53 au-1-54 /au-2-54 au-1-55 /au-2-55 au-1-56 /au-2-56 Voice Gateway Protocol -------gr303 gr303 gr303 gr303 tr08 tr08 tr08 tr08 gr303 gr303 gr303 gr303 tr08 tr08 tr08 tr08 t1cas tr08 gr303 gr303 gr303 t1cas t1cas tr08 gr303 gr303 gr303 gr303 gr303 gr303 tr08 tr08 tr08 tr08 gr303 gr303 gr303 gr303 tr08 tr08 tr08 tr08 t1cas tr08 gr303 gr303 gr303 t1cas t1cas tr08 gr303 gr303 Index ----1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 3 3 3 3 7 8 5 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 3 6 6 6 6 8 8 DS1map -----1 2 3 4 A B C D 5 6 7 8 A B C D A 1 2 3 A 1 2 1 2 3 4 A B C D 5 6 7 8 A B C D A 1 2 3 A 3 4 State ----up up up up up up up up up up up up up up up up up up up up up up up up up down down up up up up up up up up up up up up up up up up up up up up up up up up up up down down up Loopback ---------fe-payload line fe-payload line - Calls -----6 12 16 7 22 20 1 6 10 8 9 19 6 8 5 11 0 9 1 5 2 0 6 3 19 6 6 12 16 7 22 20 1 6 10 8 9 19 6 8 5 11 0 9 1 5 2 0 6 3 19 6 =============================================================================== Command completed successfully Example 2: (an individual DS1 logical port for a Voice Gateway card configured for 1+1 redundancy, DS1 physical interfaces) AXS2200> show port vg-ds1 au-1-1 =============================================================================== Voice Gateway DS1 Port Report DATE: 7/28/2004 TIME: 20:15:40 Page 1,007 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway =============================================================================== IG Shelf/ Oper Active AID Protocol Index DS1map State Loopback Calls --------------------------- ----- ------ ----- ---------- -----au-1-1 /au-2-1 gr303 1 1 up 6 =============================================================================== Command completed successfully Example 3: (an individual DS1 logical port for a Voice Gateway card, unprotected, with DS1 physical interfaces) AXS2200> show port vg-ds1 au-1-1 =============================================================================== Voice Gateway DS1 Port Report DATE: 7/28/2004 TIME: 20:15:40 =============================================================================== IG Shelf/ Oper Active AID Protocol Index DS1map State Loopback Calls --------------------------- ----- ------ ----- ---------- -----au-1-1 gr303 1 1 up 6 =============================================================================== Command completed successfully Error Codes Invalid port Voice gateway not equipped Invalid for a protection slot of a 1+1 protected group - select working slot Invalid slot Invalid ds1 Interface Page 1,008 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show potschannel conn (connection-name) Description Displays a summary of all POTS (voice) channels carried over the tdm-h248 connection. NOTE: This is valid only for tdm-h248 connections. Reported information includes: tdm-h248 Connection Name: Name of the tdm-h248 connection. Oper State: active, inactive, faulted, or setup/initializing Endpoint 1 AID: The AID of the first connection endpoint Endpoint 2 AID: The AID of the second connection endpoint For each POTS channel, the following is reported: CRV/Tmslt (Side A): slot-igtype-index-crv ig = interface group = gr303 or tr08 index = 1-8 (gr303) or 1-14 (tr08) crv = call reference value 1-maxcrv (gr303) or 1-96 (tr08) where maxcrv is configurable, default = 2048 or the T1CAS Timeslot: - slot-port-timeslot (for DS1 physical interfaces) OLT/ONT Channel AID (Side B): the POTS port AID on the ONT Name: User configured name of the POTS channel Channel ID (CHID) within the tdm-h248 conn: 16-127 AdminState: POTS channel admin state (active or inactive) To view more details of any individual potschannel, use the CLI command "show potschannel vg-voice". User Privilege Level: Operator Required Parameters: conn connection-name Indicates the descriptive name assigned to the connection. The name may be up to 80 characters in length, including alphanumeric, "-" (dash), "_" (underscore) and forward slash "/"characters. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (ONT Connection) AXS2200> show potschannel conn 22mainstreet Page 1,009 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway =============================================================================== POTS Channels for a tdm-h248 Connection Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== tdm-h248 Connection Name: 22mainstreet Oper State: active Endpoint 1 AID: au-1-vg-100 (vgw) Endpoint 2 AID: au-5-1-3-pots (ont) Side A CRV/Tmslt ----------------au-1-gr303-1-100 au-1-gr303-1-101 Side B AID --------------au-5-1-3-pots-1 au-5-1-3-pots-2 POTS Channel Name ------------smith_line_1 smith_line_2 AdminState -----------active active =============================================================================== Command completed successfully Example 2: (ONT6000 Connection) AXS2200> show potschannel conn 12potsmainstreet =============================================================================== POTS Channels for a tdm-h248 Connection Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== tdm-h248 Connection Name: 12potsmainstreet Oper State: active Endpoint 1 AID: au-1-vg-100(vgw) Endpoint 2 AID: au-5-1-3-pots (ont) Side A CRV/Tmslt ----------------au-1-gr303-1-100 au-1-gr303-1-101 au-1-gr303-1-102 au-1-gr303-1-103 au-1-gr303-1-104 au-1-gr303-1-105 au-1-gr303-1-106 au-1-gr303-1-107 au-1-gr303-1-108 au-1-gr303-1-109 au-1-gr303-1-110 au-1-gr303-1-111 au-1-gr303-1-112 au-1-gr303-1-113 au-1-gr303-1-114 au-1-gr303-1-115 au-1-gr303-1-116 au-1-gr303-1-117 au-1-gr303-1-118 au-1-gr303-1-119 au-1-gr303-1-120 au-1-gr303-1-121 au-1-gr303-1-123 au-1-gr303-1-124 Side B AID --------------au-5-1-3-pots-1 au-5-1-3-pots-2 au-5-1-3-pots-3 au-5-1-3-pots-4 au-5-1-3-pots-5 au-5-1-3-pots-6 au-5-1-3-pots-7 au-5-1-3-pots-8 au-5-1-3-pots-9 au-5-1-3-pots-10 au-5-1-3-pots-11 au-5-1-3-pots-12 au-5-1-3-pots-13 au-5-1-3-pots-14 au-5-1-3-pots-15 au-5-1-3-pots-16 au-5-1-3-pots-17 au-5-1-3-pots-18 au-5-1-3-pots-19 au-5-1-3-pots-20 au-5-1-3-pots-21 au-5-1-3-pots-22 au-5-1-3-pots-23 au-5-1-3-pots-24 POTS Channel Name -----------line_1 line_2 line_3 line_4 line_5 line_6 line_7 line_8 line_9 line_10 line_11 line_12 line_13 line_14 line_15 line_16 line_17 line_18 line_19 line_20 line_21 line_22 line_23 line_24 AdminState -----------active active active active active active active active active active active active inactive inactive inactive inactive inactive inactive inactive inactive inactive inactive inactive inactive =============================================================================== Command completed successfully Page 1,010 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Command applies only to tdm-h248 connections POTS channel not configured Connection does not exist Page 1,011 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show potschannel eh248 ont (potsport) Description Displays the details of the POTS (voice) channel for eh248 mode. Reported information includes: Always shown: POTS Channel Name: User configured name of the POTS channel OLT/ONT Channel AID (Side A): the POTS port AID on the ONT Admin State: Indicates the adminstrative state of the potschannel (active, inactive). Port Oper State: Indicates the operating state of the associated POTS port (up, down, unk) E-H.248 VLAN Member Admin State: active or inactive E-H.248 VLAN Member Oper State: active, inactive, setup/initializing, faulted User Privilege Level: Operator Required Parameters: eh248 ont potsport Specifies the ONT POTS port address (AID). It takes the following format: - oltslot-port-channel-"pots"-index (e.g. au-5-1-16-pots-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (POTS channel for ONT in eh248 mode) AXS2200> show potschannel eh248 ont au-5-1-3-pots-3 =============================================================================== POTS Channel Detail Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== POTS Channel Name: smith_line_1 ONT/OLT AID (Side A): au-5-1-3-pots-3 Admin State: active POTS Port Oper State: up E-H.248 VLAN Member Admin State: active E-H.248 VLAN Member Oper State: active Page 1,012 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway =============================================================================== Command completed successfully Error Codes POTS channel not configured ONT does not exist Invalid AID Page 1,013 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show potschannel ig (slot-igtype-index) Description Shows a summary of all POTS channels that are configured for a GR-303 or TR-08 Interface Group. For each POTS channel, the following is shown: Side A CRV/Tmslt : slot-igtype-index-crv ig = interface group = gr303 or tr08 index = 1-8 (gr303) or 1-14 (tr08) crv = call reference value 1-maxcrv (gr303) or 1-96 (tr08) where maxcrv is configurable, default = 2048 or the T1CAS Timeslot: - slot-port-timeslot (for DS1 physical interfaces) Side B AID: the configured POTS port AID on the ONT AdminState: POTS channel admin state (active or inactive) Connection Name: The name for the tdm-h248 connection that carries the POTS channel To view more details of any individual potschannel, use the CLI command "show potschannel vg-voice". User Privilege Level: Operator Required Parameters: slot-igtype-index ig Indicates the specific interface group. - slot is the slot where the Voice Gateway card is inserted. - igtype indicates gr303 or tr08 - index indicates which interface group, specifically. For gr303, index is a value between 1-8 For tr08, index is a value between 1-14 For example: au-1-gr303-1 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show potschannel ig au-1-gr303-1 =============================================================================== POTS Channels by IG Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== Side A CRV/Tmslt Page 1,014 Side B AID tdm-h248 AdminState Connection Name AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway ----------------- ---------------------- ---------- --------------------------au-1-gr303-1-1 au-5-1-1-pots-1 active smithresidence_lines_voice_ service_99/765 au-1-gr303-1-2 au-5-1-1-pots-2 active smithresidence_lines_voice_ service_99/765 au-1-gr303-1-3 au-5-1-2-pots-1 active jacksonhome_lines au-1-gr303-1-4 au-5-1-2-pots-21 active jacksonhome_lines au-1-gr303-1-5 au-5-1-1-pots-3 active smithresidence_lines_voice_ service_99/765 au-1-gr303-1-6 au-5-1-3-pots-1 active joneshome_lines au-1-gr303-1-7 au-7-2-31-pots-8 active monroe_residence =============================================================================== Command completed successfully Example 2: AXS2200> show potschannel ig au-1-tr08-1 =============================================================================== POTS Channels by IG Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== Side A CRV/Tmslt ----------------au-1-tr08-1-1 au-1-tr08-1-2 au-1-tr08-1-3 au-1-tr08-1-4 au-1-tr08-1-5 au-1-tr08-1-6 au-1-tr08-1-7 Side B tdm-h248 AID AdminState Connection Name ---------------------- ---------- --------------------------au-5-1-1-pots-1 active smithresidence_lines_voice_ service_99/765 au-5-1-1-pots-2 active smithresidence_lines_voice_ service_99/765 au-5-1-2-pots-1 active jacksonhome_lines au-5-1-2-pots-2 active jacksonhome_lines au-5-1-1-pots-3 active smithresidence_lines_voice_ service_99/765 au-5-1-3-pots-1 active joneshome_lines au-7-2-31-pots-8 active monroe_residence =============================================================================== Command completed successfully Error Codes Interface group not created Invalid AID Voice gateway not equipped POTS channel not configured Invalid for the protection slot of a 1+1 protected group - select working slot Invalid index Invalid slot Page 1,015 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show potschannel ont (potsport) Description Displays the details of the POTS (voice) channel of the tdm-h248 connection. Reported information includes: POTS Channel Name: User configured name of the POTS channel OLT/ONT Channel AID (Side A): the POTS port AID on the ONT CRV/Tmslt (Side B): GR-303 interface group and call reference value (slot-igtype-index-crv) or TR-08 interface group and call reference value (slot-igtype-index-crv) or the T1CAS Timeslot slot-port-timeslot [for DS1 interfaces]. Admin State: Indicates the adminstrative state of the potschannel (active, inactive). Oper State: Indicates the operating state of the potschannel (up, down) SignalCode: Loopstart, Loopstartfxo, or Groundstart TransPath: fulltime or afterring tdm-h248 Connection Name: Name of the tdm-h248 connection. tdm-h248 Connection Admin State: active or inactive tdm-h248 Connection Oper State: active, inactive, setup/initializing, faulted User Privilege Level: Operator Required Parameters: ont potsport Specifies the ONT POTS port address (AID). It takes the following format: - oltslot-port-channel-"pots"-index (e.g. au-5-1-16-pots-1) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) - index (1-n) Default Values none Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show potschannel ont au-5-1-3-pots-3 =============================================================================== POTS Channel Detail Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== POTS Channel Name: smith_line_1 ONT/OLT AID (Side A): au-5-1-3-pots-3 CRV/Tmslt (Side B): au-1-gr303-1-100 Admin State: active Oper State: up SignalCode: loopstart TransPath: afterring tdm-h248 Connection Name: 22mainstreet tdm-h248 Connection Admin State: active Page 1,016 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA tdm-h248 Connection Oper State: Voice Gateway active =============================================================================== Command completed successfully Error Codes POTS channel not configured Interface group not created ONT does not exist Invalid AID Invalid index Invalid slot Page 1,017 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show potschannel slot (slot) Description Shows a summary of all POTS channels that are configured for the card in the selected slot. Reported information includes: - Side A CRV/Tmslt : slot-igtype-index-crv ig = interface group = gr303 or tr08 index = 1-8 (gr303) or 1-14 (tr08) crv = call reference value 1-maxcrv (gr303) or 1-96 (tr08) where maxcrv is configurable, default = 2048 or the T1CAS Timeslot: - slot-port-timeslot (for DS1 physical interfaces) - Side B AID: the configured POTS port AID on the ONT - AdminState: POTS channel admin state (active or inactive) - Connection Name: The name for the tdm-h248 connection that carries the POTS channel The - list is sorted as follows: GR-303 Interface groups TR-08 Interface groups T1CAS interfaces To view more details of any individual potschannel, use the CLI command "show potschannel vg-voice". User Privilege Level: Operator Required Parameters: slot slot Indicates the slot/card. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (DS1 physical interfaces) AXS2200> show potschannel slot au-1 =============================================================================== POTS Channels Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== Side A Side B tdm-h248 CRV/Tmslt AID AdminState Connection Name ----------------- ---------------------- ---------- --------------------------Page 1,018 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway au-1-gr303-1-1000 au-6-1-10-pots-16 active au-1-gr303-1-1001 au-6-1-10-pots-17 active au-1-gr303-1-1002 au-6-1-10-pots-18 active au-1-gr303-1-1003 au-6-1-10-pots-19 active au-1-tr08-1-1 au-1-tr08-1-2 au-1-1-1 au-1-1-2 active active active active au-5-1-1-pots-1 au-5-1-1-pots-2 au-5-1-2-pots-1 au-5-1-2-pots-2 20mainstreet_Burlington_VT_ 7765/w2 20mainstreet_Burlington_VT_ 7765/w2 20mainstreet_Burlington_VT_ 7765/w2 20mainstreet_Burlington_VT_ 7765/w2 22southave 22southave 24southave 24southave =============================================================================== Command completed successfully Error Codes Invalid slot of a protected APS pair - select working slot Invalid slot POTS channel not configured Voice gateway not equipped Page 1,019 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show potschannel t1cas (ds1aid) Description Shows a summary of all POTS channels that are configured for the T1CAS Interface Group. For each POTS channel, the following is shown: - Side A CRV/Timeslot: the T1CAS Timeslot slot-port-timeslot (for DS1 physical interfaces) - Side B AID: the configured POTS port on the ONT - AdminState: active or inactive - tdm-h248 Connection Name: The name for the tdm-h248 connection that carries the POTS channel To view more details of any individual potschannel, use the CLI command "show potschannel vg-voice". User Privilege Level: Operator Required Parameters: t1cas ds1aid Identifies the DS1 interface on the Voice Gateway card. - ds1aid = slot-port Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (DS1 physical interfaces to VG card) AXS2200> show potschannel t1cas au-1-1 =============================================================================== POTS Channels by T1CAS Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== Side A Side B tdm-h248 CRV/Tmslt AID AdminState Connection Name ----------------- ---------------------- ---------- --------------------------au-1-1-1 au-5-1-1-pots-1 active smithresidence_lines_voice_ service_99/765 au-1-1-2 au-5-1-1-pots-2 active smithresidence_lines_voice_ service_99/765 au-1-1-3 au-5-1-2-pots-1 active jacksonhome_lines au-1-1-4 au-5-1-2-pots-2 active jacksonhome_lines au-1-1-5 au-5-1-1-pots-3 active smithresidence_lines_voice_ service_99/765 au-1-1-6 au-5-1-3-pots-1 active joneshome_lines au-1-1-7 au-7-4-32-pots-16 active murray_residence au-1-1-8 au-7-4-32-pots-24 active monroe_residence =============================================================================== Command completed successfully Page 1,020 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Error Codes Invalid for a protection slot of a 1+1 protected group - select working slot Voice gateway not equipped DS1 Interface not configured for t1cas POTS channel not configured Page 1,021 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show potschannel vg-voice ({crv | timeslot}) Description Displays the details of the POTS (voice) channel of the tdm-h248 connection. Reported information includes: POTS Channel Name: User configured name of the POTS channel OLT/ONT Channel AID: POTS port AID on the ONT CRV/Tmslt : slot-igtype-index-crv ig = interface group = gr303 or tr08 index = 1-8 (gr303) or 1-14 (tr08) crv = call reference value 1-maxcrv (gr303) or 1-96 (tr08) where maxcrv is configurable, default = 2048 or the T1CAS Timeslot: - slot-port-timeslot (for DS1 physical interfaces) Admin State: adminstrative state of the potschannel (active, inactive) Oper State: operating state of the potschannel (up, down) SignalCode: Loopstart, Loopstartfxo, or Groundstart TransPath: afterring, fulltime tdm-h248 Connection Name: Name of the tdm-h248 connection. tdm-h248 Connection Admin State: active or inactive tdm-h248 Connection Oper State: active, inactive, setup/initializing, faulted User Privilege Level: Operator Required Parameters: vg-voice {crv | timeslot} Specifies the CRV or a T0 Timeslot on the Voice Gateway card. crv takes the format of slot-igtype-index-crv, where: - slot is the slot where the Voice Gateway card is inserted - igtype is gr303 or tr08 - index indicates which interface group and takes a value from 1- 8 for GR-303, or 1-14 for TR-08 interface groups. - crv indicates the call reference value and depends on the type of interface used: - tr08: 1-96 - gr303: 1- maxcrv (default maxcrv is 2048) Note: maxcrv is configurable by GR-303 interface group. For example: au-1-gr303-7-1 and au-1-tr08-1-1 timeslot is the T1CAS timeslot on the VG card which takes the format slot-port-timeslot where: - slot is one of the following au-{1,3} - port is a value from {1-56} - timeslot is a value from {1-24} Page 1,022 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway For example: au-1-1-21 Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (CRV) AXS2200> show potschannel vg-voice au-1-gr303-1-100 =============================================================================== POTS Channel Detail Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== POTS Channel Name: smith_line_1 ONT/OLT AID: au-5-1-3-pots-3 CRV/Tmslt: au-1-gr303-1-100 Admin State: active Oper State: up SignalCode: loopstart TransPath: afterring tdm-h248 Connection Name: 22mainstreet tdm-h248 Connection Admin State: active tdm-h248 Connection Oper State: active =============================================================================== Command completed successfully Example 2: (TR-08) AXS2200> show potschannel vg-voice au-1-tr08-1-10 =============================================================================== POTS Channel Detail Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== POTS Channel Name: smith_line_1 ONT/OLT AID: au-5-1-3-pots-3 CRV/Tmslt: au-1-tr08-1-10 Admin State: active Oper State: up SignalCode: loopstart TransPath: afterring tdm-h248 Connection Name: 22mainstreet tdm-h248 Connection Admin State: active tdm-h248 Connection Oper State: active =============================================================================== Command completed successfully Error Codes Invalid slot Invalid AID POTS channel not configured Interface group not created Invalid for a protection slot of a 1+1 protected group - select working slot Invalid index Voice gateway not equipped Page 1,023 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show profile ont-eh248config name (pname) Description This command displays the configuration data in the specified E-H.248 profile. The default profile is indicated at the top of the report, and by an asterisk after the name. The following information is shown: Name: The name of the entry in the ont-h248config profile table Primary MGC: IP address or FQDN of the Primary MGC Server Primary MGC Port Number: Port number for communication with the primary MGC Primary MGC Name: String identifying the MGC Secondary MGC: IP address or FQDN of the Secondary MGC Server (empty string if not supplied) Secondary MGC Port Number: Port number for communication with the secondaryMGC Secondary MGC Name: String identifying the Secondary MGC Softswitch Type: This attribute identifies the gateway softswitch vendor. The format is four ASCII coded alphabetic characters as defined in ANSI T1.220. A value of four null characters indicates no particular vendor H.248 Version: Protocol version identifier MG Service Profile: String identifying the MG Service Profile Type MG Service Profile Version: version number for the MG Service profile Message Format: This defines the H.248 message format. Options are longtext, shorttext or binary. Transaction History Timer: Stack transaction history timer. Termination Base ID: This is the string that is used as a prefix for physical termination Ids. Service Change Delay: This is the amount of time MG waits before sending a ServiceChange message to the MGC when the termination goes out-of-service. Send Delay: This is the amount of time the MG will wait before sending a transaction to allow other transactions to be sent in the same message. Maximum Wait Delay: When the Media Gateway is started or restarted it waits for a random amount of time between zero and this value before it issues ServiceChange transaction to the MGC. Initial Retrans. Timeout: This is the retransmission timeout that will be used when the MG has no round trip time information for a given remote entity Minimum Retrans. Timeout: Lower bound for the retransmission timeout Maximum Retrans. Timeout: Upper bound for the retransmission timeout Retransmission Window: Maximum amount of time after the initial transmission of a message that a retransmission of that message will be attempted. This is referred to as T-MAX in the H.248 specification. User Privilege Level: Operator Required Parameters: Page 1,024 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA name Voice Gateway pname The user-defined profile name may have a length of up to 20 alphanumeric characters plus "-" (dash) and "_" (underscore) characters. Default Values Confirmation Message Command completed successfully Example(s) Example 1: AXS2200> show profile ont-eh248config name myeh248prof =============================================================================== ONT-EH248CONFIG PROFILE REPORT DATE: 7/01/2009 TIME: 16:08:22 =============================================================================== Default: qbdef* Name: Primary MGC: Primary MGC Port Number: Primary MGC Name: Secondary MGC: Secondary MGC Port Number: Secondary MGC Name: Softswitch Type: H.248 Version: MG Service Profile: MG Service Profile Version: Message Format: Transaction History Timer: Termination Base ID: Service Change Delay: Send Delay: Maximum Wait Delay: Initial Retrans. Timeout: Minimum Retrans. Timeout: Maximum Retrans. Timeout: Retransmission Window: my248prof 10.13.199.3 0 Stew 0 Ethan ACME 1 AnalogResGW 1 longtext 27 pots 1 0 30 10 1 4 25 =============================================================================== Command completed successfully Error Codes Profile name not found in Profile Table Page 1,025 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show stats ont eh248 (ontaddress) Description This command will provide H.248 protocol level statistics for an ONT in either tdm or eh248 voice mode. Below counters shall be shown as part of this report: Commands Sent: Number of H.248 commands sent. This includes active, completed and failed commands. Commands Active: Number of H.248 commands currently in progress. Commands Complete: Number of H.248 commands completed successfully. Commands Failed: Number of H.248 commands failed. Commands Retransmitted: Number of H.248 commands that were retransmitted at least once. Total Retransmitted: Total number of command retransmissions. The initial transmission of the command is not included Responses Sent: Number of H.248 responses sent. Responses Active: Number of H.248 responses that are currently being saved by the MG. Responses Active ACKED: Number of H.248 responses that have been acknowledged but for which the transaction ID is still being tracked to protect against duplicate requests. Responses Expired ACKED: Number of expired H.248 responses that have been acknowledged. Responses Expired UNACKED: Number of expired H.248 responses that were never acknowledged. Unacknowledged responses still constitute valid responses; they simply required MG to retain transaction information longer. User Privilege Level: Operator Required Parameters: ontaddress Specifies the address of the ONT in the format: oltslot-port-channel (e.g. au-3-4-16) Valid choices for the address parameters are: - oltslot : au-n {where n is 18 for AXS2200, and n is 14 for AXS1800} - port (the index of the PON port on the OLT PON card) - channel (the ONT channel on the PON) Default Values n/a Confirmation Message Example(s) Example 1: AXS2200> show stats ont eh248 au-3-1-16 =============================================================================== ONT E-H.248 Stats DATE: 07/04/2009 TIME: 07:14:40 =============================================================================== Page 1,026 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Name: nelson SN: MRCC12345678 ONT Address (AID): au-3-1-16 OLT PON Card: AGPOND ONT Operating Status: in_service Commands Sent: 457 Commands Active: 5 Commands Complete: 441 Commands Failed: 11 Commands Retransmitted: 0 Total Retransmitted: 0 Responses Sent: 8 Responses Active: 2 Responses Active ACKED: 2 Responses Expired ACKED: 6 Responses Expired UNACKED: 0 =============================================================================== Command completed successfully Error Codes EH248 is not configured or supported on ONT Invalid ONT ONT is in wrong state for this request Page 1,027 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show t1cassummary slot (slot) Description This command shows all logical DS1's that are configured for the T1CAS protocol on the Voice Gateway card for the slot. If the Voice Gateway card is set for 1+1 redundancy, select the odd-numbered slot, which is the working slot (for example, au-1 or au-3). User Privilege Level: Operator Required Parameters: slot slot Indicates the slot/card. Default Values none Confirmation Message Command completed successfully Example(s) Example 1: (DS1 physical interfaces on the VG card) AXS2200> show t1cassummary slot au-1 =============================================================================== T1CAS Interface Group Summary Report DATE: 7/28/2007 TIME: 20:15:40 =============================================================================== Slot: AU-1 Interface Group Type: T1CAS DS1 ------------au-1-1 au-1-2 au-1-28 au-1-56 Framing ------esf esf esf esf =============================================================================== Command completed successfully Error Codes Voice gateway not equipped Invalid slot t1cas interfaces are not configured Page 1,028 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway show vg slot (slot) report ({short | long} ) Description Reports the available slot-vg-index values for tdm-h248 connections to the Voice Gateway card. If the long report is requested, an additional summary of the tdm-h248 connections that are configured are shown. NOTE: The slot-vg-index value is used to identify the tdm-h248 connection endpoint on the Voice Gateway card. User Privilege Level: Operator Required Parameters: slot slot Indicates the slot/card. Optional Parameters: report {short | long} Indicates the type of report desired. The short report will only display connection types, states, and the connection name. The long report will additionally include both endpoints. Default Values If report is not specified in the command, then the short report is shown. Confirmation Message Example(s) Example 1: (report short) AXS2200> show vg slot au-1 report short =============================================================================== Voice Gateway Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== Slot: au-1 Summary: Total number of Voice Gateway tdm-h248 connections configured: For vg-index connection endpoints, - index values configured: 1-3, 28-29, 31-33, - index values available: 4-27, 30, 40-4000 8 =============================================================================== Command completed successfully Example 2: (long report) AXS2200> show vg slot au-1 report long =============================================================================== Voice Gateway Report DATE: 07/28/2007 TIME: 20:15:40 =============================================================================== Page 1,029 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Voice Gateway Slot: au-1 Summary: Total number of Voice Gateway tdm-h248 connections configured: For vg-index connection endpoints, - index values configured: 1-3, 28-29, 31-33, - index values available: 4-27, 30, 40-4000 8 Side A Side B slot-vg-index AID ----------------------------au-1-vg-1 au-5-3-1-pots Connection: smithresidence_lines au-1-vg-2 au-5-3-2-pots Connection: jonesresidence_lines au-1-vg-3 au-5-3-3-pots Connection: clarkresidence_lines au-1-vg-28 au-11-1-32-pots Connection: neighborhoodY au-1-vg-29 au-12-3-27-pots Connection: neighborhoodX au-1-vg-31 au-5-4-1-pots Connection: monroeres_lines au-1-vg-32 au-5-4-2-pots Connection: russellres_lines au-1-vg-33 au-5-4-10-pots Connection: kelleyres_lines =============================================================================== Command completed successfully Error Codes Voice gateway not equipped Invalid for a protection slot of a 1+1 protected group - select working slot Invalid slot Page 1,030 AXS2200 OLT R7.4 CLI Reference Guide MOTOROLA Page 1,031 Voice Gateway AXS2200 OLT R7.4 CLI Reference Guide COPYRIGHT 2012 COMPASS ID: 397450931 VER 02 WWW.MOTOROLA.COM