Catalogue of Ghana Standards 2012

CATALOGUE OF GHANA STANDARDS 2012www.gsa.gov.gh CATALOGUE OF GHANA STANDARDS 2012 PUBLISHED BY THE GHANA STANDARDS AUTHORITY Adjacent the Gulf House,Oponglo. P.O.BOX MB 245, ACCRA – GHANA TEL: (+233) O302 500065 – 6 FAX (+233) 0302 500231 E – MAIL: [email protected]/[email protected] Copyright Ghana Standards Authority 2012 GSA CATALOGUE CONTENTS Introduction Aims and Functions of theAuthority Authority’s Services/Activities Mission of the Authority How to use the catalogue Price code for Ghana Standards Sale of standards Abbreviations used ICS Subject structure Numerical list of standards Alphabetical subject index List of standards by subject (ICS) List of standards under review Index to list of standards under review Withdrawn standards PAGE ii ii ii ii iii iv iv v vi 1 324 387 430 442 Annex A Page | i INTRODUCTION The Ghana Standards Authority Assurance (MSTQ). The GSA therefore develops standards to promote quality in trade and industry and provides calibration services to ensure that measuring devices offer accurate and reliable measurements in trade, industry, commerce, science and technology. The GSA also conducts conformity assessments on products to provide confidence that quality requirements are fulfilled. The core business of the GSA, in effect, covers standards development, calibration, testing and certification (product and quality management system). AIMS AND FUNCTIONS OF THE AUTHORITY To establish and promulgate standards to ensure high quality products. To promote standardisation in industry and commerce. To promote industrial efficiency and development. To promote standard in public and industrial welfare, health and safety. To promote fair-trading practices through the development of a proficient national measurement scheme. AUTHORITY’S SERVICES/ ACTIVITIES The GSA offers a wide variety of services and activities categorized as follows: Product Certification System Certification Laboratory Testing Calibration, verification and inspection of weighing and measuring devices. Standards Development and sale of standards. (GSA) is the National Statutory body with the overall responsibility for quality infrastructure embracing Metrology, Standards, Testing and Quality MISSION OF THE AUTHORITY The mission of the Ghana Standards Authority is to promote stardardisation for the improvement of the quality of goods, services and sound management practices in industries and public institutions in Ghana. Page | ii HOW TO USE THE CATALOGUE Numerical list of Standards The main section of this catalogue is arranged in numerical order with an alphabetical subject index. The aim of this approach is to facilitate easy retrieval of information. Sample entry (A) (B) (C) (D) (E) GS 313: 2001 (2004) Ψ (F) (G) (I) 67.080.10 Nuts – Specification for groundnut Group 1 (E) 3 pgs (H) Specifies the requirements, methods of sampling and test for groundnuts in the shell or in the form of kernels for human consumption or for oil milling. A – Standard Number B – Year of Publication C – Reaffirmed Date (indicating the continuing currency of the standard) D – An identical standard – The publication is identical in every detail with a corresponding international standard. E – ICS Number F – Standard Title G – Price Code H – Number of Pages I – Scope Standards Arranged According to Subject (ICS) The list of standards arranged according to ICS, contains the following bibliographic information:    ICS Number Standard Number Page number referred to in Numerical list of standards. Page | iii Subject Structure The subject structure of the Catalogue presented on page vii is based on the International Classification for Standards (ICS). This structure is a hierarchical classification, which consists of three levels. Level 1 covers broad fields of activity in standardization. Each field (printed in bold upper-case character) contains a two-digit notation, e.g. 67 FOOD TECHNOLOGY The fields are subdivided into groups (level 2: printed in bold lower-case characters). The notation for a group consists of the field notation and the three-digit group number, separated by a point, e.g.: Milk and milk products A number of groups are further divided into subgroups (level 3: printed in lower-case characters). The notation of a subgroup consists of the group notation and a two-digit number, separated by a point, e.g.: 67.100.20 Butter PRICE CODE FOR GHANA STANDARDS Code Pages Current Price (GH¢) 1 2 3 4 5 1 – 10 11 – 20 21 – 30 31 – 40 41 – 50 30.00 50.00 70.00 80.00 100.00 SALE OF STANDARDS Local and International Standards are sold to interested manufacturers, exporters and importers to enable them produce to specification for favourable competition on the local and international markets. Local and International Standards can be obtained at the Ghana Standards Authority ’s Documentation and Information Center. GS IEC standards listed in the catalogue would be ordered for clients on request. Page | iv FormoreinformationcontactourInformationCenteratthefollowingaddress: GhanaStandardsAuthority P.O.BoxMB245 Accra -Ghana Tel: 233-0302-500065/6;506991-4 Fax: 233-0302-500092 E-mail: Website: [email protected] / [email protected] http://www.gsa.gov.gh The Ghana Standards Authority is located at Okponglo,off theTetteh Quarshie Interchange AbbreviationsUsed GS GSCODEX GSD/E/F GSIEC GS IM GSISO GS ITU OIML ICS PAS GhanaStandard AdoptedCodexStandard Adopted(AmericanSocietyforTestingandMaterials)ASTMStandard Adopted(InternationalElectro technicalCommission)IECStandard Instruction manual Adopted(InternationalOrganizationforStandardization)ISOStandard GS Adopted (International Telecommunications Union) ITU Standard Adopted(InternationalOrganizationofLegalMetrology)OIMLStandard International Classification of Standards PubliclyAvailableSpecification Page/v International Classification for Standards (ICS) 53 MATERIALS HANDLING EQUIPMENT 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION 03 SERVICES. COMPANY ORGANIZATION MANAGEMENT AND QUALITY. SOCIOLOGY. ADMINISTRATION. TRANSPORT 07 MATHEMATICS. NATURAL SCIENCES 65 AGRICULTURE 11 HEALTH CARE TECHNOLOGY 67 FOOD TECHNOLOGY 13 ENVIRONMENT. HEALTH PROTECTION. SAFETY 17 METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA 19 TESTING 21 MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE 23 FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE 25 MANUFACTURING ENGINEERING 27 ENERGY AND HEAT TRANSFER ENGINEERING 29 ELECTRICAL ENGINEERING 31 ELECTRONICS 33 TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING 35 INFORMATION TECHNOLOGY. OFFICE MACHINES 37 IMAGE TECHNOLOGY 39 PRECISION MECHANICS. JEWELLERY 43 ROAD VEHICLE . ENGINEERING 45 RAILWAY ENGINEERING 47 SHIPBUILDING AND MARINE STRUCTURES 49 AIRCRAFT AND SPACE VEHICLE ENGINEERING 71 CHEMICAL TECHNOLOGY 73 MINING AND MINERALS 75 PETROLEUM AND RELATED TECHNOLOGIES 77 METALLURGY 79 WOOD TECHNOLOGY 81 GLASS AND CERAMICS INDUSTRIES 83 RUBBER AND PLASTICS INDUSTRIES 85 PAPER TECHNOLOGY 87 PAINT AND COLOUR INDUSTRIES 91 CONSTRUCTION MATERIALS AND BUILDING 93 CIVIL ENGINEERING 95 MILITARY ENGINEERING 97 DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT. SPORTS 55 PACKAGING AND DISTRIBUTION OF GOODS 59 TEXTILE AND LEATHER TECHNOLOGY 61 CLOTHING INDUSTRY Page | vi Pedology 13.50 Transport exhaust emissions 13.040.020 Environmental protection 13.79 Wood technology (Vocabularies) Rubber and plastics industries 01.20 Head protective equipment 13. PHYSICAL PHENOMENA Services Quality Management of human resources Quality management and quality 03. 01.43 Road vehicle engineering (Vocabularies) 01.040.120 Measurement of fluid flow 17.67 01.040.040.040.75 01. Safety 01.50 Protective footwear 17 METROLOGY AND MEASUREMENT.040.220. commerce 01.99 Other standards related to quality 03.220.040. DOCUMENTATION 03.100.59 01. Office machines (Vocabularies) Materials Handling Equipment (Vocabularies) Packaging and distribution of goods (Vocabularies) Textile and leather technology (Vocabularies) Agriculture (Vocabularies) Food technology (Vocabularies) 07 07.040.080.20 11.040.100.13 (Vocabularies) 01.35 Information technology.280 Radiation protection 13.20 Drinking water 13.53 01.120.65 01. SAFETY 01.01 GENERALITIES.060.20 Physical properties of soils 13.060.040.55 01.040.71 Chemical technology (Vocabularies) 01.30 17. 01. COMPANY ORGANIZATION.40 and products 13.020 Metrology and measurement in general 17. Mechanical contraceptives ENVIRONMENT.060 Water quality 13.020 01.080 Soil quality.120 03.87 Paint and colour industries (Vocabularies) 01.060. Publishing Documents in administration. MANAGEMENT AND QUALITY.140 11.50 Examination of water for chemical substances 13.320 Alarm and warning systems 13.100 Technical drawings 01.180 11. HEALTH PROTECTION.100.30 11. Industrial hygiene 13.120.060 01.220.120.10 assurance Product and company certification.120.01 Protection against fire in general 13.30 Application of statistical methods 03.73 Mining and minerals (Vocabularies) Petroleum and related technologies (Vocabularies) 01.20 Fire protection Ignitability and burning behaviour of materials 13.040 Air quality 13.29 Electrical engineering (Vocabularies) 01.340.040.040.140 Information Sciences.220.080 Quantities and units Graphical symbols Graphical symbols for use on electrical and 01.340.080. STANDARDIZATION.10 Flow in closed conduits Page | vii .01 Technical drawings in general 01. TERMINOLOGY.220.340 Protective equipment 13.060.40 Transport by water MATHEMATICS.100 11.040. 03.10 Environmental management 13.99 Other standards related to water quality 13. infusion and injection equipment Surgical instruments and materials Laboratory medicine Hospital equipment Aids for disabled or handicapped persons Birth control.040.30 Sewage water 13.01 Standardization.040.020. Documentation (Vocabularies) Environment and health protection.260 Protection against electric shock 13.040 11.040.20 Conformity assessment 03.200 13 Medical equipment Transfusion. ADMINISTRATION.220 Protection against fire 13.140.120.100 Occupational safety.080 03.85 Paper technology (Vocabularies) 01.040.40 electronics. Terminology.25 Manufacturing engineering (Vocabularies) 01.040.30 and industry SERVICES.040.300 Protection against dangerous goods 13.040 Vocabularies Generalities.040. NATURAL SCIENCES Terminology (principles and coordination) 01.83 (Vocabularies) 01.10 Fire-fighting 13.30 11 Food microbiology HEALTH CARE TECHNOLOGY 11. TRANSPORT SOCIOLOGY 03 13. 040 Environmental testing 21 MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE 25.040.130.30 25.20 Low voltage switchgear and controlgear 29.140 Acoustics and acoustic measurements 17. gas cylinders Pipeline components and pipelines Iron and steel pipes Plastics pipes Metal fittings Plastics fittings Pipes and fittings of other materials Hoses and hose assemblies Seals for pipe and hose assemblies Valves Valves in general Pressure regulators Check Valves Fluid power systems Cylinders Ventilators.30 systems Electrical equipment for working in 29.120 Shafts and couplings 21.060.020 23.17.30 Noise emitted by means of transport 19 TESTING 19.220 Flexible drives and transmissions 21.99 Other electrical accessories 29.40 Saws Hand-held tools Hand-operated tools Other hand-held tools Welding.220.10 Metric screw threads 21.80 23.01 Insulating materials in general Super conductivity and Conducting 29.10 23.120.40 Luminaires 29.040.035.30 23.120 Fluid storage devices Pressure vessels. apparatus.040 Screw threads 21.160.160.040.40 25.160 Rotating machinery 29. Thermal insulation 29 ELECTRICAL ENGINEERING 23 23.160. couplers 29.120.140.100.140.120. Discharge lamps 29. equipment 21.70 23. Fans.060 Fasteners 21.100.20 23.40 Generating sets 29.30 Plugs.220.100 25.060.20 Incandescent lamps 29.060 25.50 25.40 Rivets 21.020 Electrical engineering in general 29.220 25.70 Clamps and staples 21.20 Inch screw threads 21.40 Switches Fuses and other overcurrent protection 29.30 Chain drives and their components 21.160.30 Special screw threads 21.30 25.120.240.220.99 Other standards related to lamps 29.060 Electrical wires and cables 29.020.140.40 25.060.01 Lamps in general 29.01 networks in general Control equipment for electric power 29.220.160 Springs 21.50 23. socket outlets.240 networks Power transmission and distribution 29.20 Acid secondary cells and batteries Power transmission and distribution 29.020 Test conditions and procedures in general 19. brazing and soldering Welding consumables Welding equipment Welded joints and welds Brazing and soldering Surface treatment and coating Metallic coatings Characteristics and design of machines.50 23. studs 21.220.20 components 29.060.10 Wires 29.260 special conditions Page | viii .220 Heat recover. splines 21.040.100 Components for electrical equipment Electrical and electromechanical 29.040.020 FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE 27 ENERGY AND HEAT TRANSFER ENGINEERING 27.100.060.120.100.060.040 23.10 Lamp caps and holders 29.060 23.10 Primary cells and batteries 29.20 25.060.220 Galvanic cells and batteries 29.30 Keys and keyways.10 25. Air-conditioners 25 MANUFACTURING ENGINEERING 25.060.30 Fluorescent lamps.140.99 25.130 Switchgear and controlgear 29.240.140.45 23.160.140 Lamps and related equipment 29. Stabilized power 29.060.140.100 23. Converters.160 25.140.10 Conduits for electrical purposes 29.140 25.120 Electrical accessories 29.220.180 Transformers.200 supply 29.040.40 23.20 Cables 29.20 23.50 devices 29.040.10 Belt drives and their components 21.050 materials 29.01 Machine tool systems Modular units and other devices Machine tools Cutting tools Cutting tools in general 29.040.01 23.020 Internal combustion engines 27.080 25.40 23. screws.10 Bolts.040.140.140.040.01 Galvanic cells and batteries in general 29. Reactors Rectifiers.120. 060 Capacitors 31.120 Equipment for manual handling 55 PACKAGING AND DISTRIBUTION OF GOODS Packaging and distribution of goods in general 55.220.20 Clocks 39.100 Bottles.040.100 Electromagnetic compatibility (EMC) 33.60 Presentation layer 35.100.220. JEWELLERY 39.040 Resistors 31.160.10 Fixed capacitors 31. Bags 55.120.10 Electrical and electronic equipment 43.30 Air mode containers.180 Freight distribution of goods 55.060 technology Software development and system 35.040.040.160 Microprocessor systems IT terminal and other peripheral 35.020 55.240. Pots.40 IT applications in banking 35.40 Complete.220.30 Photographic chemicals 39 PRECISION MECHANICS.060.060 Jewellery 43 ROAD VEHICLES ENGINEERING 33 33.240. OFFICE EQUIPMENT 43.120.40 Aerials 33.140 Computer graphics 35.040 Horology 39.99 Other road vehicle systems Internal combustion engines for road 43.180 equipment Interface and interconnection 35.040.140 Motorcycles and mopeds 43.99 special conditions 31 ELECTRONICS 35.220.180.260.080 (ISDN) 33.040.20 Cranes 53.130 Aerosol containers 55.20 Switches TELECOMMUNICATIONS AUDIO & VIDEO ENGINEERING Photography 37.240.10 General purpose containers 55.020 Electronic components in general 31.01 Electromagnetic compatibility in general 33.220 Data storage devices 35.120 telecommunications equipment 33.040.70 Application layer 35.020 Telecommunications in general Integrated Services Digital Network 33. suspensions 43.080 documentation 35.01 Capacitors in general 31.020 35. 43.260 Office machines 37 IMAGE TECHNOLOGY 31. 35.30 Network layer 35.040 Information technology (IT) in general Character sets and information coding Languages used in information 35.50 Control systems 43.29.040.180.120.180.20 Magnetic storage devices in general 35.30 documentation and publishing 35.01 Resistors in general 31.30 Indicating and control devices 43.100.30 Optical storage devices 35.060.20 Radio receivers 33.20 Immunity Components and accessories for 33.01 Data storage devices in general 35.040.240 Applications of information technology 53. Waveguides 33.100.40 Braking systems 43.200 equipment 35.10 Physical layer 35.20 Wires and symmetrical cables 33. Tubes 55.040.120 Cans.10 Electrical installations for outdoor use Other electrical equipment for working in 29.060.25 Television receivers 33. pallets and nets 55. filled transport packages Page | ix .20 IT applications in office work IT applications in information. signalling and warning devices 43.040 Packaging materials and accessories 55.10 Coaxial cables.160.100. Tins.040 37.01 Freight distribution of goods in general 55.040.100.50 Transmissions.30 Audio systems 35 INFORMATION TECHNOLOGY.110 Networking 35.60 IT application in transport and trade 35.240.160.20 Data link layer 35.150 Cycles 53 MATERIALS HANDLING EQUIPMENT 35.020.020 Road vehicles in general 43.180.20 General purpose pallets 55.10 Fixed resistors 31.100 Open systems interconnection (OSI) 35.100.040.100.060 vehicles Electrical and electronic equipment.180.100.080 Sacks.60 Bodies and body components 43.20 Lighting. Jars 55.40 Transport layer 35.100 Electronic tubes 31.260. 10 Spices and condiments 67.50 Physicochemical methods of analysis Other standards related to analytical 71.200 Edible oils and fats.20 Yarns 59.100 Products of the chemical industry 71.100.060.80 Chemicals for purification of water 71.20 Gases for industrial application 71.040. Fastening 61.100.10 Natural fibres 59.060 Cereals.080.040. Starch 67.120 produce 67.10 Sugar and sugar products 67.080.060.060 Metalliferous minerals 73.080 Organic chemicals 71. Cocoa 67.20 Oxides 71.040.20 Butter 67. 67.50 Wood-protecting chemicals 71.140 Tea.220 Spices and condiments.180 Sugar.30 Equipment for drilling and mine excavation Page | x .020 Farming and forestry 65.70 Cosmetics. meat products and other animal 67.20 Coffee and coffee substitutes 67.01 composite in general 59.40 Chemical analysis 71.060.120.15 Aromatic hydrocarbons 71.040 of clothing 61.100.080.100.100. Clothing accessories.150 Fishing and fish breeding Tobacco.080. Pyrotechnics and fireworks Chemicals for industrial and domestic 71.140.080 Fertilizers 65.10 Tea 67. Coffee.080.080 Non-metalliferous minerals 73.020 Processes of the textile industry 59.100.080.40 Surface active agents 71.30 Textile fabrics 59.40 Coated fabrics 59.020 67.140. Food additives.10 Meat and meat products 71.060.10 Alcoholic beverages 67.100. tobacco products and related 65.080 the clothing industry 65 AGRICULTURE 65.120.30 Acids 71.240 Sensory analysis 71 CHEMICAL TECHNOLOGY 61. Toiletries 71.180.120 Animal feeding stuffs 65.100.060 Inorganic chemicals 71.30 Leather and furs 61 CLOTHING INDUSTRY 67.30 Explosives.45 Refrigerants and antifreezes 71. hides and pelts 59.30 Animal husbandry breeding Agricultural machines.080.100.100 Milk and milk products 67.100.20 Plant growing 65.30 Chemical reagents 71.100 Pesticides and other agrochemicals Pesticides and other agrochemical in 65.100.040.01 Organic chemicals in general 71.35 disinfection purposes 71.140.40 Ice-cream and ice confectionery Meat.10 Animal and vegetable fats and oils 67. Sugar products.10 Insecticides 65.20 Oilseeds 67.100.100.99 Other products of the chemical industry 73 MINING AND MINERALS 73.100.40 Bases 71.20 Food additives 67.20 Starch and derived products 67.01 Textiles in general 59.100 Mining equipment 73.140.50 Ropes 59.40 Organic acids 71.080.080. pulses and derived products 67.10 Fruits and derived products 67.30 Cocoa 67.020.50 Salts 71.060 equipment 65.10 Milk and processed milk products 67.30 Fish and fishery products 67.040 Analytical chemistry 71.01 Textile fibres in general 59. Oilseeds 67.20 Raw skins.01 Products of the chemical industry in general 71.160.220.60 Textile floor coverings Materials for the reinforcement of 59.080.060 Footwear Sewing machines and other equipment for 61.060 Textile fibres 59. Ethers 71.99 Other pesticides and agrochemicals 65.180.160.120.060.10 Iron ores 73.080.160 Beverages 67.60 Alcohols.120.080 Products of the textile industry 59.140.99 Other organic chemicals 71.20 Poultry and eggs 67. implements and 65.100.200.060.100.160 equipment 67 67.140 Leather technology 59.060.99 Other animal produce 67.200.080.100.01 general 65.080.050 for food products 67.20 Vegetables and derived products 67.99 Other inorganic chemicals 71.220.080.020 Clothes Headgear.99 chemistry 71.90 Phenols 71.020.100.040 FOOD TECHNOLOGY Processes in the food industry Food products in general General methods of tests and analysis 67.230 Prepackaged and prepared foods 67.20 Non-alcoholic beverages 67.060.59 TEXTILE AND LEATHER TECHNOLOGY 59. zinc.090 External structures 91.040 Manufacturing processes in the rubber and plastics industries Raw materials for rubber and plastics 91.060.200 handling equipment 75. Floors.10 Road vehicle tyres 83.060.080.140.100.040 WOOD TECHNOLOGY 85. Mortar 91.080.01 Protection of and in buildings in general Page | xi .40 Hoses 83.180 industry 79 79.10 Aluminium and aluminium alloys 77. industrial oils and related 75.020 77 METALLURGY 83.080.15 Steels for reinforcement of concrete 77.40 Concrete structures 91.040.99 Other construction materials 91.080 Inks.10 Cement.080 Petroleum products in general Lubricants.060 Elements of buildings 91. sawlogs and sawn timber 79.140.10 Thermosetting materials 83.040.100 products 75.120.080 Refractories 83 RUBBER AND PLASTICS INDUSTRIES 91.020 79.99 Other rubber and plastics products 83.100.180 Adhesives 85 PAPER TECHNOLOGY 77. bituminous materials and other 75.60 Lead.160 Tyres 83. Printing inks Wood technology processes Wood.080.30 Plastics pipes and fittings for non fluid use 83.10 Latex and raw rubber 83.060 Corrosion of metals 77.060.080 Ferrous metals 77.020 83.30 Solvents 87. Stairs 91.100.060.080.040.040 Glass 81.140 Rubber and plastics products 83. Facades 91.140.080 Paper products 87 PAINT AND COLOUR INDUSTRIES 87.040.080 Semi-manufactures of timber 81 GLASS AND CERAMICS INDUSTRIES 91 CONSTRUCTION MATERIALS AND BUILDING 81.01 Plastics in general 83.15 Mineral materials and products 83.060.020 Paint coating processes 87.140.040 Buildings 91.140 Iron and steel products 77.160.060.120.100 Cellular materials 83.140.040.080.25 Terracolta building products 91.100.10 Metal structures 91.65 Steel wire.30 Copper and copper alloys 77.140.20Liquid fuels 75.060 Rubber 83.01 Rubber and plastics products in general 83.10 Films and sheets 83.20 Fibre and particle boards 79.080.140. wire ropes and link chains 77.01 Elements of buildings in general 91.160.120.10 Irons 77.20 Rubber compounding ingredients 83.75 PETROLEUM AND RELATED TECHNOLOGIES Extraction and processing of petroleum and natural gas 75.30Gaseous fuels Petroleum products and natural gas 75.99 Other structures 91.10 Plywood 79.060 Paper and board 85.50 Seals 83.99 Other iron and steel products 77.30 Concrete and concrete products 91. Partitions.040 Paints and varnishes 87.10 Walls.080 Plastics 83.10 Pigments and extenders 87.20 Thermoplastic materials 83.120 Protection of and in buildings 91.160. Lime.150.060 Natural gas 75.040 Pulps 85.30 Ceilings.100.060.140.50 Doors and windows 91.140.20 Timber structures 91.140.10 Mechanical testing of metals 77.040 Testing of metals 77.100.120 Hydraulic fluids Waxes.120 Reinforced Plastic 83.10 Aluminium products Equipment for the metallurgical 77. Gypsum.50 Flat steel products and semi-products 77.30 Auxiliary materials and additives for plastics 83.01 Raw materials for rubber and plastics in general 83.01 Construction materials in general 91.20 Glass in building 81.140 petroleum products 75. tin and their alloys 77.080.060.040.120.060 Wood-based panels 79. 020 CIVIL ENGINEERING Earthworks.10 Kitchen furniture Cooking ranges.160.10 Interior lighting 91.50 Electricity supply systems 91.080.040. working tables. Foundation construction.040.80 Drainage systems 91.60 Cookware. Excavations.100 heating appliances 97. cutlery and flatware 97.195 Items of art and handicrafts 97.40 Street lighting and related equipment 97 DOMESTIC AND COMMERCIAL.060 Laundry appliances 97.50 Toys Page | xii .60 Water supply systems 91.080 Cleaning appliances Domestic.180 commercial equipment 97. ovens 97.140 Installations in buildings 91.140.040.160 Lighting 91.200 Equipment for entertainment 97.140 Furniture 97.170 Body care equipment Miscellaneous domestic and 97.30 Domestic refrigerating appliances 97.080.080 Road engineering 93.140.200.080.140.200. EQUIPMENT ENTERTAINMENT.040. Underground works 93.91.50 Small kitchen appliances 97.140.40 Playgrounds 97.040. SPORTS 97.40 Lightning protection 91.145 Ladders 97.30 Road equipment and installations 93.120.20 and similar appliances 97.030 general 97.190 Building accessories 93 93.190 Equipment for children 97.01 Road engineering in general 93.70 Sanitary installations 91. commercial and industrial 97.040 Kitchen equipment 97.020 Home economics in general Domestic electrical appliances in 97.10 Thermal insulation of buildings 91.120. 100. 77.Specification for Aluminum Roofing Sheets 14 Pages Gr 2 This standard specifies the minimum requirements for materials.01 Ed. 2 Building and Construction Materials . 2 Textiles . 3 Specification for Portland cement . making-up (construction) methods of sampling and test for men's dress and ordinary shirts. dimensions (including tolerances) and finish for profiled aluminum sheet (plain.Specification for hot-Dipped Zinc. __________________________________________________________________________________________ GS 25: 2008 91.Coated or 18 Pages Aluminum / Zinc .240.10 GS 30: 2010 Ed. with minimum coating mass (in g/m) on both sides in the flat before corrugation __________________________________________________________________________________________ 77.20. physical and chemical properties. 2 Standard Specification for Voltages for AC Transmission and Distribution Systems and 3 Pages Standards Frequency Gr 1 __________________________________________________________________________________________ GS 22: 2011 Ed.10 Ed.150. 2 Building and Construction Materials .Coated Corrugated Steel Sheets for Building Gr 2 This standard specifies requirements for 76 mm pitch corrugated steel sheet manufactured from hot-dip zinc coated or hot-dip aluminum / zinc coated steel sheet.CEM 1 91.CATALOGUE OF GHANA STANDARDS ©GSA 2012 ___________________________________________________________________ GSA CATALOGUE 2012 ___________________________________________________________________ GS 1: 2001 29.150.Specification for Men's Shirts 61. profile.060.020 11 Pages Gr 2 This standard specifies requirements. __________________________________________________________________________________________ 1 .10 13 Pages Gr 2 Specifies requirements for the composition and manufacture of Portland cement and for is strength. embossed or painted) for roofing __________________________________________________________________________________________ GS 31: 2008 Ed. 10 16 Pages 22 Pages Gr 3 The standard specifies methods for the chemical analysis of meat and meat products __________________________________________________________________________________________ 2 . 67. 2 Specification for Ice Cream 67.160.060 67. 2 Specification for Peanut Butter and Crunches Gr 1 This standard deals with requirements for peanut butter and crunches.060 Ed.Method of Sampling Cereals (As Grain) 67. 2 Meat and Meat Products . 2 Metallic Contaminants in Food Products . nut or chocolate. __________________________________________________________________________________________ GS 60: 2005 Ed. __________________________________________________________________________________________ GS 59: 1997 (2005) 67. 2 Method of Test for Alcoholic Beverages Gr 2 This standard specifies the methods for chemical analysis of alcoholic beverages __________________________________________________________________________________________ GS 70: 1990 (2005) Ed.Methods for Chemical Analysis 67.Methods of Test for Wheat Flour 15 Pages Gr 2 It specifies reference methods for the analysis of wheat flour. either singly or in combination.Methods of Test 67.120. It also specifies the methods of sampling and testing __________________________________________________________________________________________ GS 65: 2005 Ed.10 3 Pages 6 Pages Gr 1 This standard specifies general conditions relating to sampling for assessment for the quality of cereal grains.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 49: 2005 Ed. 2 Cereals and Pulses .40 16 Pages Gr 2 This standard applies to Ice cream prepared with or without the addition of fruit.10. __________________________________________________________________________________________ GS 62: 1990 (2005) Ed.080.020 67.050 21 Pages Gr 3 This standard specifies methods of test for metallic contaminants in food products __________________________________________________________________________________________ GS 64: 2004 Ed.100. 2 Cereals and Pulses . 10 6 Pages Gr. 2 Specification for Commercial Capacity Measures for Liquid Petroleum Products 7 Pages Gr 1 It prescribes the requirements for metric capacity measures of cylindrical and conical shapes.10 5 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for fresh.120.10 5 Pages Gr 1 This standard specifies the methods for sampling meat and meat products. Intended for use in normal commercial transactions.120. Chilled and Frozen Mutton 4 Pages Gr 1 It specifies the requirements and methods of sampling and test for fresh. Chilled and Frozen Poultry 10 Pages Gr 1 Gives the requirement and methods of sampling and test for dressed poultry __________________________________________________________________________________________ 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 17. 2 Meat and Meat Products .060 GS 85: 2005 Ed.120.120. 2 Meat and Meat Products .Specification for Dressed. 3 Meat and Meat Products . 2 Meat and Meat Products .10 GS 92: 2005 Ed. __________________________________________________________________________________________ GS 89: 2008 Ed.120.Method of sampling 67.120. fresh and cooked sausages or fresh and frozen meat. chilled and frozen beef __________________________________________________________________________________________ 67. 2 Meat and Meat Products . 2 Meat and Meat Products .Specification for Fresh. __________________________________________________________________________________________ GS 94: 2011 Ed.Specification for Luncheon Meat 67.Specification for Fresh. These sampling procedures are applicable to the following categories of products: Packaged meat. chilled and frozen pork. Chilled and Frozen Beef 67. Chilled and Frozen Pork 67.10 7 Pages Gr 1 It specifies requirements and methods of sampling and test for fresh. __________________________________________________________________________________________ GS 90: 2003 Ed. 1 This standards specifies the requirements and methods of sampling and test for meat product designated as '' Luncheon Meat" _________________________________________________________________________________________ 3 .10 GS 91: 2003 Ed. chilled and frozen mutton __________________________________________________________________________________________ GS 93: 2008 Ed.Specification for Fresh. 060 4 Pages 7 Pages Gr 1 The standard specifies the requirements for whole grain sorghum (sorghum Vulgar) offered for human consumption.10 3 Pages 4 Pages 7 Pages Gr 1 This standard specifies the requirements for Pineapples grown from Ananas Comosus L.100.10 4 . 2 Cereals and Pulses . sampling and methods of analysis for fresh pineapples __________________________________________________________________________________________ GS 102 : 2004 Ed.060 67.080. 2 Milk and Dairy Products . 2 Alcoholic Beverages .160. Gr 1 It gives the requirements for soft wheat flour __________________________________________________________________________________________ GS 96: 1990 (2005) Ed.01 67.Specification for Filled Milk Gr 1 This standard gives requirements for filled milk __________________________________________________________________________________________ GS 100 : 2004 Ed. 2 Cereals and Pulses .Specification for Soft Wheat Flour.100.10 Ed. 2 Milk and Dairy Products .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 95: 2004 Ed. It does not apply to processed sorghum __________________________________________________________________________________________ GS 98: 2004 Ed.Specification for Brandy 5 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for brandy __________________________________________________________________________________________ GS 103 : 2004 67.Specification for Sorghum 67.40 67. (Mrr) entering the domestic and international trade in the fresh natural state.160. 2 Alcoholic Beverages .Specification for Gin 4 Pages Gr 1 The standard specifies the requirements and methods of sampling and test for gin __________________________________________________________________________________________ 67. It also specifies grading. 2 Specification for Pineapples 67.Specification for Ice and Milk Lollies Gr 1 Gives requirements for ice and milk lollies __________________________________________________________________________________________ GS 101 : 2004 Ed. potable water and food __________________________________________________________________________________________ GS 117 : 1990 (2006) Ed. procedure for sampling.160.100 Ed. does not provide the constructional details of the base material used in the manufacture of batik fabric.Specification for Blow Moulded Containers of Nominal Capacities up to 35 Litres 15 Pages Gr 2 This standard specifies the requirements and methods of sampling and test for self.120. __________________________________________________________________________________________ GS 106-2 : 1991(2005) Ed. marking.100 18 Pages Gr 2 It specifies the requirements.supporting containers that are made of plastics materials. 65. 2 Animal Feeding Stuffs Part 2 : Methods of Test for Poultry Feeds. cushioning.20 14 Pages __________________________________________________________________________________________ GS 116 : 2007 55. criteria for conformity and test method.Specification for Polypropylene Woven Sack 55. 2 Alcoholic Beverages . sampling and methods of test for flexible lead-bearing polyurethane foam.Part 1 . Gr 2 This standard specifies the methods of test for Poultry Feeds. 2 Packaging . The standard outlines the performance requirements of batik fabric and gives information on packing.Specification for Poultry Feed 65. __________________________________________________________________________________________ GS 118 : 2007 Ed.Specification for Flexible Polyurethane Foam 83. 2 Plastics . __________________________________________________________________________________________ 5 . bedding and similar applications.080. The standard however.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 104 : 2004 Ed. and are suitable for the storage and transportation of chemicals. 2 Cellular Materials .10 7 Pages Gr 1 It specifies the requirements and methods of sampling and test for whisky __________________________________________________________________________________________ GS 106-1 : 2007 Ed.Specification for Handmade Batik Fabric 4 Pages Gr 1 The standards specifies the requirements for handmade batik fabric made of cotton.080 6 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for polypropylene woven sacks of the pillow type for general purpose packaging __________________________________________________________________________________________ GS 122 : 2005 59.20 10 Pages Gr 1 This standard specifies the requirements and sampling for feeds for chicken (Gallus domesticus). 2 Textiles .120.01 Ed. 2 Animal Feeding Stuff . manufacture in blocks and fabricated shapes for domestic and institutional use in seat.Specification for Whisky 67. are of nominal capacities up to 35 l. 160 5 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for single grade petrol suitable for use in spark-ignition combustion engines other than aviation piston engines __________________________________________________________________________________________ GS 141 : 2005 75.ignition type __________________________________________________________________________________________ GS 142 : 2009 Ed. 3 Petroleum Products .080.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 124 : 2005 Ed. anchor logs and stabilizer logs for overhead power and telecommunication lines.240.Specification for Toilet Soap 71. This standard does not apply to carbolic soap and medicated soap. Kusia and Kusibiri Poles. 2 Textiles .40 4 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for toilet soap.20 Ed. __________________________________________________________________________________________ GS 131 : 2006 Ed. __________________________________________________________________________________________ GS 140 : 2009 Ed. 2 Timber and Sawn Logs .160 4 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for kerosene for domestic lighting heating purpose __________________________________________________________________________________________ GS 145-1 : 2007 29. 2 Specification for Gas Oil ( Diesel Fuel) 4 Pages Gr 1 It specifies the requirements and methods of sampling and test for gas oil suitable for use in internal combustion engines of the compression . Afina.100. 2 Soaps and Detergents . __________________________________________________________________________________________ 6 .Test for Colour Fastness to Washing 59.01 3 Pages Gr 1 This standard specifies the method of test to investigate the fastness to washing of coloured textiles under mild and severe washing procedure. Java printed and imitation printed traditional African prints __________________________________________________________________________________________ GS 126 : 2005 Replaces GS 126 :1992 Pts 1&2 Textiles .080.Specification for Petrol (Motor Gasoline) 76. The standard is applicable to wax printed and wax block printed. sampling and methods of test for traditional African prints.Specification for Traditional African Prints 59.30 6 Pages Gr 1 This standard specifies the requirements. 3 Specification for Kerosene 75. 19 Pages Gr 2 Specifies the requirements for wood poles.Teak.160 Ed.Specification for Wood Poles for Overhead Power and Telecommunication Lines . 2 Code of Practice for Wood Treatment Plants : Quality Control Procedures for Wood 3 Pages Treatment Plants Gr 1 This standard describes the acceptable minimum requirements for exercising total quality control in wood preserving plants. 1 Timber and Sawn Logs . __________________________________________________________________________________________ 79. 3 Specification for Fresh Yams 67.040 8 Pages Gr 1 This standard specifies the requirements for yams for domestic and international trade in the fresh state __________________________________________________________________________________________ GS 151 : 2005 Ed.040. 1 Timber and Sawn Logs . 2 Specification for Weighing Instruments to be used for Trade Purpose 17.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 145-2 : 2008 79.Specification for Mosquito Coil 65. 29. 2 Code of Practice for Wood Treatment Plants : Quality Control and Inspection of Timber 10 Pages Products.020 GS 146-2 : 2007 Ed.240. and adherence is necessary in order to assure quality and reliability of treated timber products.20 Ed.10 13 Pages Gr 2 This standard specifies the requirements.Specification for Wood Poles for Overhead Power and 34 Pages Telecommunication Lines Part 3 : Eucalyptus Poles Gr 4 This standard specifies requirements for pine poles anchor logs and stability logs for overhead power and telecommunication lines __________________________________________________________________________________________ GS 146-1 : 2007 79.100 11 Pages Gr 2 Specifies the requirements for weighing instruments to be used for trade and other commercial purposes __________________________________________________________________________________________ 7 . Gr 1 This standard describes the responsibilities and procedures pertaining to the quality control and inspection of timber products by treatment companies.240.040.100. and methods of sampling and test for mosquito coils __________________________________________________________________________________________ GS 150 : 2011 Ed. 2 Pesticides .20 Ed. __________________________________________________________________________________________ GS 147 : 2007 Ed. 29.020 Ed.Specification for Wood Poles for Overhead Power and Telecommunication Lines 35 Pages Part 2 : Pine poles Gr 4 This standard specifies requirements for pine poles anchor logs and stability logs for overhead power and telecommunication lines __________________________________________________________________________________________ GS 145-3 : 2008 79. It does not. __________________________________________________________________________________________ GS 156 : 2007 55.Specification for Salt Fortified with Iodine 4 Pages Gr 1 The standard specifies requirements for salt fortified with iodine __________________________________________________________________________________________ GS 155 : 2004 Ed.080.Specification for Potable Spirit for Blending Purposes 67. The standard does not specify the constructions details of the base material.220. __________________________________________________________________________________________ 8 .220. 2 Spices and Condiments .160.01 4 Pages Gr 1 It specifies the performance requirements of cotton tie-and-dye material.Specification for Multiwall Paper Sacks for Cement and/or Related 6 Pages Products .20 Ed. apply to salt obtained as a result of or as a by-product of chemical process.080.Valve-Pasted-Flat Hexagonal Ends Type Gr 1 This standard specifies the requirements.220.20 7 Pages Gr 1 It specifies the requirements. __________________________________________________________________________________________ GS 154 : 2006 67.20 8 Pages Gr 1 The standard gives requirements. 2 Packaging .Specification for Unrefined Edible Salt 67. however. __________________________________________________________________________________________ GS 163 : 2005 Ed.10 4 Pages Gr 1 It lists the requirements and methods of sampling and test for rectified spirit used for the production of potable alcoholic beverages.Specification for Refined Edible Salt 67. 2 Spices and Condiments .30 4 Pages Gr 1 The standard specifies the requirements for woven cotton gray cloth used as the base material for Traditional African Prints and other dress material.Sacks . however apply to salt obtained as a result of or a by-product of a chemical process __________________________________________________________________________________________ GS 153 : 2004 Ed. 2 Alcoholic Beverages . methods of sampling and test for unrefined edible salt. It does not. 2 Spices and Condiments .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 152 : 2004 Ed. sampling procedures and test methods for multiwall paper sacks (vaval-pasted-flat hexagonal ends type) for packaging of 50kg of cement and related products of nominal net mass of 50kg __________________________________________________________________________________________ GS 160 : 2005 Ed. 2 Specification for Gray Cotton Fabric (Gray Baft) 59. methods of sampling and test for refined edible salt. This standard covers the performance requirements for gray cloth without specifying constructional details.180.40 Ed. 2 Specification for Cotton Tie and Dye Fabric 59. It is applicable to both the open-top gussetted type of open-top pillow type wrappers and transit containers. 2 Packaging . 1 Packaging . methods of test and sampling of expanded polystyrene box for packaging of chilled fish for export. 2 Specification for Beer 23 Pages Gr 3 This standard specifies the requirements and methods of sampling and test for beer __________________________________________________________________________________________ GS 172 : 2007 Ed.40 5 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for laundry soap. 2 Soaps and Detergents .Specification for Facial Tissues 85. It does not apply to polyethylene sacks for heavy duty purposes or to film containers manufactured from polyethylene film laminates used in composite packaging __________________________________________________________________________________________ 55.Specification for Expanded Polystyrene Box for Packaging of Chilled Fish for Export 10 Pages Gr 1 This standard specifies the requirements.20 23 Pages Gr 3 This Ghana standard specifies the requirements. and transit container polyethylene film.060.160.Alcoholic Beverages .160.Specification for Drinking Water 13.100. methods of sampling and test for wrappers. 3 Water Quality. __________________________________________________________________________________________ 67. Wrappers and Transit 19 Pages Containers Gr 2 This standard specifies the requirements. methods of sampling and test for drinking water obtained from "prepared waters" or "waters defined by origin". __________________________________________________________________________________________ GS 175-1 : 2009 Ed. The standard also applies to packaged/bottled drinking water but not packaged/bottled natural mineral water.Specification for Low Density Polyethylene Film. 2 Non.160 GS 174 : 1998 Ed. __________________________________________________________________________________________ 9 .Specification Laundry Soap 71.10 Ed. 2 Paper and Paper Products .20 GS 168 : 1995 (2005) Ed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 167 : 2006 Ed.040 Ed.080 4 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for facial tissues __________________________________________________________________________________________ GS 173 : 2011 55.Specification for Fruit Squashes and Fruit Cordials 5 Pages Gr 1 This standard gives the requirements and methods of sampling and tests for fruit squashes and cordials __________________________________________________________________________________________ GS 169 : 1995 67. 040 Ed.20 GS 175-5 : 1998 Withdrawn Specification for Drinking Water Part 5 . __________________________________________________________________________________________ 87. The methods are applicable to the analysis of raw and potable waters but not directly applicable to saline or mineralised water without adaptation.Specification for Strong Wheat Flour 67. 1 Paints and Varnishes .Specification for Decorative and Protective Emulsion Paint 6 Pages Gr 1 Specifies the requirements. wood. 2 Cereals and Pulses . __________________________________________________________________________________________ GS 176 : 1999 Ed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 13. wood.Methods for Determining the Radiological Characteristics of Drinking Water 27 Pages Gr 3 It specifies methods for the determination of gross alpha activity and gross beta activity in non-saline water. sealed plaster walls and concrete surfaces.040 GS 182 : 1995 Ed.100. 1 Paints and Varnishes .Specification for Decorative High Gloss Enamel Paints for 11 Pages Interior and Exterior Use Gr 2 Specifies the requirements.Specification for Soft Drinks 67.Specification for Sodium Hypochlorite Solutions 71. cement plaster. composition board and similar materials that have been primed or painted previously. methods of sampling and tests for emulsion paint.160. methods of sampling and test for ready mixed decorative high gloss alkyd based enamel paint for interior and exterior use as a finishing coat on metal wood.99 8 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for aqueous sodium hypochlorite solutions for industrial. composition board. methods of sampling and test for ready mixed decorative high gloss alkyd based enamel paint for interior and exterior use as a finishing coat on metal. __________________________________________________________________________________________ 87. 1 Paints and Varnishes . and similar materials that have been primed or painted previously. asbestos cement sheeting and stucco. sampling and test methods for soft drinks marketed in closed air-tight containers __________________________________________________________________________________________ GS 180 : 2005 87. The paint is applied as a finishing coat on lime plaster.20 4 Pages Gr 1 This standard specifies the requirements.060.040 GS 181 : 2005 Ed. water purification as well as domestic use __________________________________________________________________________________________ GS 187 : 2004 Ed. __________________________________________________________________________________________ GS 186 : 2007 Ed.Specification for Decorative High Gloss Enamel Paint for 24 Pages Interior and Exterior use Gr 3 This standard specifies the requirements. sealed plaster walls and concrete surfaces. laundry-bleaching.060 3 Pages Gr 1 This standard specifies the requirements for strong wheat flour __________________________________________________________________________________________ 10 . 2 Bleaching Agents . 1 Non-Alcoholic Beverages . assembled furniture. sizes. 1 Building and General Construction .35 9 Pages Gr 1 This standard specifies the types. windows and ventilators generally used in residential buildings. __________________________________________________________________________________________ GS 190 : 1998 Withdrawn. workmanship and finish.50 Ed.down and semi. windows and ventilators for industrial and other special buildings such as workshops and garages.140.Guide to Quality Sandcrete Block Manufacturing 6 Pages Gr 1 This standard guides sandcrete block manufacturers to produce sandcrete blocks which are of good quality. Windows and 9 Pages Ventilators Gr 1 This standard specifies the requirements and methods of sampling and test for wooden frames for doors.100.Specification for Scouring Powder 71. 91.Specification for Wooden Frames for Doors.50 Ed. It does not cover wooden frames for doors. 1 Wood and Wood Products . performance or hollow used in building and construction industry. __________________________________________________________________________________________ GS 192 : 2003 Ed. and test for wooden doors __________________________________________________________________________________________ 11 .Specification for Wooden Doors 35 Pages Gr 4 It specifies the requirements regarding materials.060.060.Furniture .100.30 GS 189 : 2000 Ed.25 7 Pages Gr 1 Specifies the requirements for dimensions and physical requirements of burnt clay units for solid. 1 Building and Construction Materials . 2 Wood and Wood Products .100. __________________________________________________________________________________________ GS 197 : 2003(2008) 79. schools and hospitals. This standard does not refer to design or ergonomic considerations in order to afford maximum freedom in design and manufacture. 91.Down and Semi 8 Pages Assembled Furniture Gr 1 This standard specifies general requirements. __________________________________________________________________________________________ 97.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 188 : 1998 Ed.Specification for Burnt Bricks. replaced by GS ISO 6935-1 Specification for Hot Rolled Steel Bars for Concrete Reinforcement 77. methods of sampling and test for scouring powder __________________________________________________________________________________________ 91. construction.020. 1 Household Chemicals .Specification for Knock.140 GS 196 : 1996 Ed. sampling and method of test for knock. requirements.15 12 Pages Gr 2 This standard specifies the requirements for hot rolled steel bars for concrete reinforcement. __________________________________________________________________________________________ GS 194 : 2003(2008) 79.020. 2 Wood and Wood Products . offices. 91. 10 GS 202 : 2001 Ed. The standard does not however apply to groundnut oil.10 5 Pages Gr 1 Specifies the requirements for palm stearin. __________________________________________________________________________________________ GS 207 : 2011 Ed. 1 The standard specifies the requirements for canned/pouched tuna and tuna products __________________________________________________________________________________________ GS 209 : 2007 71.99 Ed.200. which must be further processed to render it suitable for human consumption.Specification for Canned Tuna and Tuna Products 67.Methods of test for non-carbonated soft drinks 15 Pages Gr 2 This standard gives the total colony count Principle Microbial cells present in a sample mixed with agar medium each forms visible separated colonies. 1 Beverages .200.Non Alcoholic Beverages .Specification for Edible Palm Stearin 67.10 Ed.Specifications for Edible Groundnut Oil 5 Pages Gr 1 Specifies the requirements for edible groundnut oil.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 198 : 2011 79. 2 Wood and Wood Products . 1 Animal and Vegetable Fats and Oils . 1 Animal and Vegetable Fats and Oils . __________________________________________________________________________________________ GS 203 : 2001 Ed.120. 1 Animal and Vegetable Fats and Oils .10 5 Pages Gr 1 Specifies the requirements for edible palm olein.30 10 Pages Gr. __________________________________________________________________________________________ 67. which must be further processed in order to render it suitable for human consumption __________________________________________________________________________________________ GS 204 : 2001 Ed. 2 Fish and Fish Products .Specification for Plywood for General use Manufactured from Ghana Hardwood 10 Pages Gr 1 This standard applies to general purpose plywood manufactured in Ghana from either rotary cut or sliced veneers from Ghana wood bonded together with an adhesive __________________________________________________________________________________________ 67. This is obtained by mixing decimal dilutions of the food sample homogenate with the medium.160.100.20 GS 201 : 2003 Ed.060.200.Specification for Edible Palm Olein 67. 2 Specification for Washing Blue 19 Pages Gr 2 This standard specifies the requirements and methods of sampling and test for washing blue belonging to the family of inorganic pigments which are insoluble in water and intended for use in laundry __________________________________________________________________________________________ 12 . It does not apply to palm olein. __________________________________________________________________________________________ GS 218 : 1998 Ed. 1 Specification for Plastics Drinking Straw 83. 55. It does not apply to foods exposed to doses imparted by measuring instruments used for inspection purposes __________________________________________________________________________________________ GS 211 : 2003 Ed. 1 Specification for Beach Sandals 61.140. It also specifies grading. which are in direct contact with food of temperature not exceeding 100 degrees celsius.060.17.10 12 Pages Gr 2 This standard specifies the requirements for raw cashew nuts and kernels from the cashew tree. 2 Food Technology . 1 Specification for Disposable Expanded Polystyrene Food Containers.Specification for Raw Cashew Nuts and Kernels 67. 1 Water Quality. methods of sampling and test for beach sandals made from flexible cellular polymeric materials. __________________________________________________________________________________________ GS 212 : 2006 Ed. methods of sampling and test for disposable expanded polystyrene food containers.99 4 Pages Gr 1 This standard gives requirements and methods of sampling for plastics drinking straw __________________________________________________________________________________________ GS 220 : 2005 Ed.080.20 10 Pages Gr 1 This standard specifies the requirements. sampling and methods of test for cashew nuts and kernels. It does not apply to natural mineral waters sold or used for other purposes __________________________________________________________________________________________ 13 .Specification for Natural Mineral Water 13. __________________________________________________________________________________________ GS 213 : 1998 Ed.240 14 Pages Gr 2 It specific the requirements and methods of sampling and testing for foods processed by irradiation.020.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 210 : 2007 Ed.060 3 Pages Gr 1 It lists the requirements.Specification for Irradiated Food 67.040 13 Pages Gr 2 This standard specifies the requirements. __________________________________________________________________________________________ GS 216 : 1998 Ed. 2 Specification for Maize 67.060 9 Pages Gr 1 It specifies the requirements for whole grain shelled dent maize and or shelled flint maize or their combinations intended for human consumption. 2 Nuts . intended for domestic and international trade. methods of sampling and test for all packaged natural mineral waters offered for sale as food. Specification for Detergent-Base Shampoo Gr 1 Specifies the requirements. methods of sampling and test for detergent based hair shampoo.100 Ed.180 7 Pages Gr 1 This standard specifies the requirements. __________________________________________________________________________________________ GS 227-2 : 2006 71.10 5 Pages Gr 1 Specifies the requirements for edible palm oil. thereby ensuring that such product are safe wholesome and of the nature and quality intended.Specification For Plastic Ball Point-Pen 83. 1 Writing Aids . 1 Codes of Practice for Comestic Industries Part 2 : List of substances which shall not form part of composition of cosmetic products 9 Pages Gr 1 Lists substances which shall not form part of composition of cosmetic products __________________________________________________________________________________________ GS 227-3 : 2006 71.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 221 : 2006 Ed.200.120. 1 Animal and Vegetable Fats and Oils . 1 Cosmetics . 1 Codes of Practice for Cosmetic Industries Part 3 : List of Substances which Cosmetic Products shall not contain except subject to 26 Pages restrictions and conditions laid down Gr 3 Lists substances which cosmetic products shall not contain except subject to restrictions and conditions laid down. It does not apply to powder and bar shampoo which are detergent base. __________________________________________________________________________________________ GS 227-1 : 2006 Ed.100.10 6 Pages Gr 1 Applies to products designated as "cooked ham" packaged in any suitable packaging material .70 7 Pages 8 Pages 14 .100 Ed. It does not apply to palm oil. sampling and methods of test for ball-point pen refills made from plastic it does not apply to ball-point refills made from metals. __________________________________________________________________________________________ GS 223 : 2005 Ed. __________________________________________________________________________________________ GS 225 : 2004 Ed. 97. __________________________________________________________________________________________ 71. 67.99. Gr 1 Specifies guidelines to the efficient manufacture of cosmetic products.Codes of Good Manufacturing Practice for Cosmetic Industries. 1 Cosmetics .140. 1 Specification for Cooked Cured Ham.100 71.Specification for Edible Palm Oil 67. which must be further processed in order to render it suitable for human consumption __________________________________________________________________________________________ GS 224 : 2003 Ed. 70 4 Pages 7 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for toilet paper supplied in rolls __________________________________________________________________________________________ GS 233 : 1997 67.spiny lobsters and slipper lobsters from the genus Homarus of the family Nephropidae and from families Palinuridae and scyllaridae intended for human consumption.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 228 : 2004 Ed.30 Ed.100. 2 Specification for Shea Butter (Unrefined) 67. 1 Roots and Tubers . 2 Paper and Paper Products .10 6 Pages Gr 1 This standard specifies the requirements.120.Specification for Setting Lotion Gr 1 Specifies requirements. method of sampling and test for hair setting lotions. methods of sampling and test for shea butter (unrefined) __________________________________________________________________________________________ 15 .40 GS 229 : 2011 Ed. 2 Soaps and Detergents . methods of sampling and test for gari __________________________________________________________________________________________ GS 238 : 2006 Ed.200. 1 Fish and fishery Products . methods of sampling and test for liquid detergents for domestic hand dish washing __________________________________________________________________________________________ GS 230 : 2007 Ed. 1 Cosmetics .040 23 Pages Gr 3 Specifies the requirements.120.100.Specification for Liquid Detergent for Domestic Hand Dish 18 Pages Washing Gr 2 This standards specifies the requirements. rock lobsters . 1 Fish and fishery products -Code of Practice for the Holding and Handling of Live 15 Pages Lobsters Gr 2 This code of practice contains technological guidelines and the essential requirements of hygiene for holding and handling of lobsters on the shore. __________________________________________________________________________________________ 71. __________________________________________________________________________________________ GS 236 : 1997 67.Specification for Toilet Paper in Rolls 85.Quality Control systems for the production of fishery Products __________________________________________________________________________________________ GS 237 : 2003 Ed.Specification for Gari 67.30 Ed. It applies to lobsters .020 71. methods of sampling and test for inked record ribbons made of cotton. silk or nylon fabric for use on typewriters of various types __________________________________________________________________________________________ GS 246 : 2011 Ed. methods of sampling and test for 'shito' (Pepper sauce) __________________________________________________________________________________________ GS 241 : 1999 Ed.99 6 Pages Gr 1 Specifies the requirements. 1 Specification for Rubber Teats for Feeding Bottles 83. methods of sampling and test for rubber teats for feeding bottles __________________________________________________________________________________________ GS 254 : 2004 Ed.20 13 Pages Gr 2 This standard specifies the requirements. 1 Spices and Condiments . 2 This standard applies to processed tomato paste or tomato puree prepared by concentrating the juice or pulp obtained from substantially sound.seeds. __________________________________________________________________________________________ 16 .160. It does not apply to special purposes treatment brushes or denture brushes or to those toothbrushes.220.170 10 Pages Gr 1 Specifies requirements for manually operated toothbrushes for general use.10 2 Pages Gr 1 Specifies the requirements. methods of sampling and test for malt drinks __________________________________________________________________________________________ GS 240 : 2001 Ed.20 15 Pages Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 239 : 2001 Ed. 1 Specification for Typewriter Ribbons 35. __________________________________________________________________________________________ GS 242 : 1999 Ed.140. 2 Specification for Tomato Paste and Tomato Puree 67. which are power operated. and other coarse or hard substances in the finished product offered for direct consumption. __________________________________________________________________________________________ GS 249 : 2004 Ed. mature red tomatoes strained or otherwise prepared to exclude skin.260 4 Pages Gr 1 Specifies the requirements. 1 Non-Alcoholic Beverages . 1 Specification for Carbon Paper 85.080.Specification for Malt Drinks 67.Specification for 'Shito' (Pepper Sauce) 67.080 7 Pages Gr 1 Specifies the requirements for typewriter and pencil carbon paper and their methods of sampling and test. 1 Specification for Tooth Brushes 97. 040 21 Pages Gr 3 This standards specifies the requirements. 67. single phase 50 Hz. a. methods of sampling and tests for a portland cement-based paint powder that when mixed with water provides decorative and protective coatings for interior and exterior use on porous surfaces of masonry. bricks.Specification for Biscuit.Specification for White Bread 9 Pages Gr 1 Prescribes the requirements and the methods of sampling and test for white bread. and normally intended for domestic water heating purposes.060 Ed.10 4 Pages Gr 1 Applies to canned beef products designated as "corned beef" and sold in hermatically sealed containers which have been heat treated after sealing to such an extent that the product is shelf-stable.040. composite or coloured bread. or any other bread made from ingredients other than what is prescribed.120. cement renderings. methods of sampling and tests for biscuits baked from dough containing essential ingredients specified under clause 4 with or without the addition of other ingredients specified under clause 5. methods of sampling and test for skin creams __________________________________________________________________________________________ GS 263 : 1994 Specification for Electronic Immersion Water Heaters 12 Pages Gr 2 This standard covers the requirements and methods of test for portable electric immersion water heaters with a flexible cord and connector of rated loading not exceeding 3.180.10. __________________________________________________________________________________________ GS 274 : 2010 Ed. __________________________________________________________________________________________ GS 276 : 2003 Ed. It does not apply to wholemeal. __________________________________________________________________________________________ 17 . concrete. 1 Flour Confectionery .99 7 Pages Gr 1 Prescribes the essential requirements.060 29.Specification for Skin Creams 71. __________________________________________________________________________________________ GS 265 : 2001 67. 1 Industrial Chemicals . 87.Specification for Powder Cement Paint 91.100. 2 Paints and Varnishes . __________________________________________________________________________________________ GS 266 : 2003 Ed.Specification for Maize Starch for Cotton Textile Industry 13 Pages Gr 2 Specifies the requirements.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 256 : 2003 67. 1 Flour and Confectionery .100.c. __________________________________________________________________________________________ GS 258 : 2006 Ed. methods of sampling and test for maize starch used in the textile industry (mainly cotton) as sizing and finishing material.20 Ed.70 9 Pages Gr 1 Specifies the requirements. 1 Cosmetics . 2 Specification for Corned Beef 67. building blocks and asbestos-cement.0 kW and designed for connection to supplies at voltages not exceeding 250 v. 100.100.Specification for Hair Conditioners Gr 1 Specifies the requirements. washing and drying the acid-precipitated coagulum of skimmed milk and/or for other products obtained by milk. 67. methods of sampling and test for hair conditioners __________________________________________________________________________________________ GS 286 : 2011 Ed. 1 Specification for Plastic Monobloc Chairs 83.Specification for Hair Pomade. 1 Cosmetics .10 5 Pages Gr 1 Specifies the edible acid casein of milk product obtained by separating. 1 Cosmetics .080.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 278 : 2003 Ed.100. __________________________________________________________________________________________ GS 282 : 2003 83.70 71.01 71. 1 Specification for Rulers 6 Pages Gr 1 It gives the requirements for plastic and wooden rulers of bound graduated length of 150mm. methods of test.Specification for Plastic Buckets 83. __________________________________________________________________________________________ GS 280 : 2005 Ed. Gr 1 Specifies the requirements.140. methods of sampling and test for hair pomade. methods of sampling and test for hair relaxing creams __________________________________________________________________________________________ GS 285 : 2004 Ed. 1 Specification for Edible Casein Products.180 Ed.99 . 1 Plastics and Rubber . 97.100. 1 Cosmetics .140 47 Pages Gr 5 Specifies the requirements. sampling and acceptance criteria for plastic monobloc chairs.70 8 Pages 7 Pages 6 Pages 11 Pages Gr 2 This standard specifies the requirements and methods of sampling and test for plastic buckets with or without lids. __________________________________________________________________________________________ 18 .Specification for Permanent Hair Relaxing Creams Gr 1 Specifies the requirements.70 71. __________________________________________________________________________________________ GS 281 : 2006 Ed. 300mm for use primarily in schools and offices __________________________________________________________________________________________ GS 284 : 2004 Ed. 30 Ed.120.10 6 Pages Gr 1 Applies to products designated as "cooked pork shoulder" packaged in any suitable packaging material.060 6 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for PVC sandala manufactured by injection moulding process __________________________________________________________________________________________ GS 300 : 2008 Ed.100.40 2 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for Anago Soap.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 288 : 2003 Ed.140. 1 Footwear .Specification for "Anago" Soap 71. 1 Food Technology . __________________________________________________________________________________________ GS 289 : 2007 Ed. methods of sampling and test for edible cassava chips produced from fresh. methods of sampling and test for plastic containers for pharmaceuticals excluding parenteral and ophthalmic preparations __________________________________________________________________________________________ GS 292 : 2004 83.Specification for Polyvinyl Chloride (PVC) Sandals 61.100.040 5 Pages Gr 1 This standard specifies the requirements.Specification for Blocks Part 1: Precast Sandcrete Blocks 22 Pages Gr. 1 Specification for Cooked Cured Pork Shoulder. It is intended to be used for domestic and industrial purposes but not for direct human consumption __________________________________________________________________________________________ 19 .100 Ed.Specification for Edible Cassava Chips 67. 67. 1 Soaps and Detergents . __________________________________________________________________________________________ GS 290 : 2007 55. materials. 2 Building and Construction Materials . marking.40 Ed. matured and sound cassava. 1 Plastics . 1 Specification for Polyvinyl Chloride (PVC) Garden Hose 4 Pages Gr 1 Specifies dimensional and performance requirements for three types of PVC garden hose __________________________________________________________________________________________ GS 297-1 : 2010 91.Specification for Plastic Containers for Pharmaceutical use other than 18 Pages Parenteral and Ophthalmic Preparations Gr 2 This standard specifies the requirements. test methods and criteria for conformity for solid. 3 This standard specifies requirements for dimensions. hollow and cellular precast sandcrete blocks classified according to their characteristic compressive strengths __________________________________________________________________________________________ GS 298 : 2007 Ed. otherwise known as Alata Samina. Methods of Analysis for Trace Elements in Vegetables 2 Pages Gr 1 This standard specifies the method of analysis for trace elements in vegetables __________________________________________________________________________________________ GS 305-4 : 1997 67. 67. Mn. K.050.10 Ed.050. medium and low fat content. __________________________________________________________________________________________ 20 .050. Cu and Pb in fruit juices.160. K. for use with a toothbrush in the cleaning of teeth to promote oral hygiene. __________________________________________________________________________________________ GS 305-3 : 1997 67. methods of sampling and test for margarine and margarine. 67.Methods of Analysis for Trace Elements in Meat and Meat Products 2 Pages Gr 1 This standard specifies the method of analysis for trace elements namely Pb and Cu in meat and meat products. Mg. 1 Dentistry . It is applicable to the determination of Cu. 1 Metallic Contaminants in Food .99 Ed.Methods of Analysis for Trace Elements in Fish and Sea Food 2 Pages Gr 1 This standard specifies the method of analysis for trace elements in fish and sea foods __________________________________________________________________________________________ GS 305-5 : 1997 67. 1 Metallic Contaminants in Food . 1 Metallic Contaminants in Food . 2 Animal and Vegetable Fats and Oils . 67.050.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 301 : 2007 67.100. Na.30 Ed. 1 Metallic Contaminants in Food .060. It does not apply to any product which contains more than 95/ fat or less than 39/ fat __________________________________________________________________________________________ GS 303 : 2008 Ed. 1 Metallic Contaminants in Food .type fat spread of full. Ca.120. Fe. __________________________________________________________________________________________ GS 305-2 : 1997 67. Mg. 67.050. 67. It does not apply to toothpaste for the cleaning of dentures __________________________________________________________________________________________ GS 305-1 : 1997 67.20 Ed. Zn.Methods of Analysis for Trace Elements in Edible Oils 2 Pages Gr 1 This standard specifies the method of analysis for trace elements in various edible oils.Methods of Analysis for Trace Elements in Fruit Juice 3 Pages Gr 1 This standard specifies the method of analysis for trace elements namely Ca. Na.200 Ed.Specification for Margarine and Margarine -Type Fat Spreads 7 Pages Gr 1 Specifies the requirements.Specification for Toothpaste 11.120.080 Ed.20 13 Pages Gr 2 This standard specifies the requirements and methods of sampling and test for toothpaste. 67. 2 Agricultural Implements . 1 Specification for Cooked Cured Chopped Meat.Specification for Ground (Powdered) Chilli 67.Performance 10 Pages Requirements. __________________________________________________________________________________________ 21 . __________________________________________________________________________________________ GS 312 : 2007 65.10 Ed.140.100.held pressurised aerosol dispensers for indoor use as space sprays against house flies. 1 Nuts . methods of sampling and tests for ethanol suitable for industrial use.30 Ed.Specification for Groundnut 3 Pages Gr 1 Specifies the requirements. close bill blade. __________________________________________________________________________________________ GS 323 : 2003 29. open bill blade and tapered blade.10 Ed.220. methods of sampling and test for groundnuts (peanuts) in the shell or in the form of kernels. __________________________________________________________________________________________ GS 315 : 2003 Ed. Gr 1 Specifies the performance requirements together with the test methods and conditions required to show compliance of tubular fluorescent and other gas-discharge lamps with integrated means for controlling starting and stable operation (self-ballasted lamps) intended for domestic and similar general lighting purposes having a rated wattage up to 60 W.99 10 Pages Gr 1 This standard specifies the requirements and methods of tests for matchets of straight blade.10 8 Pages Gr 1 It specifies the requirements. 1 Lighting Systems .Specification for Ethanol for Industrial use 71.080.held Aerosol Dispensers against Flying 21 Pages Insects Gr 3 Specifies the requirements and describes a method for determining the insecticidal efficiency of hand .120. 2 Pesticides. It does not apply to metred valve or total.Specification for Matchets 65.10 7 Pages Gr 1 Applies to products designated as "chopped meat" which have been packed in any suitable packaging material. 1 Industrial Chemicals .060. 1 Spices and Condiments .Self-Ballasted Lamps for General Lighting Services .Specification for Insecticide in Hand.080. methods of sampling and test for ground (powdered) chilli __________________________________________________________________________________________ GS 311 : 2003 Ed. for human consumption or for oil milling __________________________________________________________________________________________ GS 314 : 2010 Ed. __________________________________________________________________________________________ GS 313 : 2001 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 309 : 2002 Ed.60 18 Pages Gr 2 Specifies the requirements.release dispensers. 59.99 3 Pages Gr 1 Specifies requirements for materials.040. 1 Methods of Test of Plastics .Self-Ballasted Lamps for General Lighting Services .Specification for Emulsion Base Textured Wall Coatings for 12 Pages Interior and Exterior use Gr. __________________________________________________________________________________________ GS 325 : 2004 Ed. luggage compartment floors.080.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 29. 1 Textiles .Specification for Automotive Carpeting 43. capacity. 59. intended for domestic and similar general lighting purposes. __________________________________________________________________________________________ GS 330 : 2008 Ed. neck finish for plastics containers for skin and hair-care products and their closures intended for semi-solids __________________________________________________________________________________________ GS 326 : 2004 83. 1 Lighting Systems .140. construction.e.Safety Requirements.080. I.Optical and Colour Properties (Weathering) 4 Pages Determination of Haze Gr 1 Describes a method for measuring the light transmitting properties and from these the light scattering properties. Parcel shelves. exposed to a low energy source of heat . __________________________________________________________________________________________ GS 333 : 2009 87. 10 Pages Gr 1 Specifies the safety and interchangeability requirements.60 .01 Ed.100 Laboratory Test Method for Assessment of Horizontal burning characteristics of 9 Pages specimens not larger that 150mm x 50mm x 13mm (nominal) of Cellular Plastics and Cellular Rubber Materials when subjected to a Small Flame Gr 1 Describes a small-scale laboratory procedure for comparing the relative horizontal burning characteristics of cellular plastics and cellular rubber materials. trim panels and side liner panels in the luggage compartments of motor vehicles. 2 the standard specifies the requirements and methods of sampling and test for emulsion base textured wall coating suitable for interior and exterior use.60 . haze ofplanar section of transparent plastics film and sheet.040.040 Paints and Varnishes .60 22 Pages Gr 3 This standard specifies requirements.60 19 Pages Gr 2 The standard specifies the requirements. 1 Specification for Plastic Containers for Skin and Hair Care Products 83. 1 Textiles . methods of sampling and test for tufted and needle. sampling and test methods for two classes of textile -faced upholstery fabrics suitable for permanent use in motor vehicles __________________________________________________________________________________________ GS 331 : 2008 Ed. required to show compliance of tubular fluorescent and other gas-discharge lamps with integrated means for controlling starting and stable operation (self-ballasted lamps). The coatings are intended for use on crazed concrete and plaster surfaces to obliterate hair-line cracks __________________________________________________________________________________________ 22 . __________________________________________________________________________________________ GS 327 : 2004 83. having a rated wattage up to 60 W. as such. together with the test methods and conditions.140.30 GS 324 : 2003 Ed.Specification for Automotive Upholstery Fabrics 43.punched carpeting for use on: interior floors.080. 100. __________________________________________________________________________________________ GS 335 : 2003 Ed. anhydrous butter oil. __________________________________________________________________________________________ 23 . intended for direct consumption or further processing. 67. 1 Replaces GS 99:1990 Specification for Flavoured Yoghurt (Yogurt) and products Heat .10 3 Pages Gr 1 Applies to anhydrous milk fat. 1 Specification for Sweetened Condensed Milks. milk fat.99 3 Pages Gr 1 Applies to food grade whey powder and Acid whey powder. 67. 1 Specification for Whey Powders. 67. which are intended for further processing orculinary use. 2 Pages Gr 1 Specifies milk product obtained by lactic acid fermentation through the action of lactobacillus bulgaricus from milk and milk products. 1 Specification for Butter.100.10 4 Pages Gr 1 Applies to sweetened condensed milks. intended for direct consumption or further processing. __________________________________________________________________________________________ GS 336 : 2003 Ed.100.99 Ed.99 Ed.100.20 2 Pages Gr 1 Specifies the fatty product derived exclusively from milk and/or obtained from milk. Gr 1 Applies to flavoured yoghurt and the products heat . __________________________________________________________________________________________ GS 340 : 2003 Ed.Treated after 4 Pages Fermentation. 67. 1 Replaces GS 99:1990 Specification for Yoghurt and Sweetened Yoghurt.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 334 : 2003 Ed.treated after fermentation.10 4 Pages Gr 1 Applies to evaporated milks. __________________________________________________________________________________________ GS 337 : 2003 67. butter oil and ghee. 1 Specification for Milk Fat Products. 67.100.100. __________________________________________________________________________________________ GS 339 : 2003 Ed. 1 Specification for Evaporated Milks. principally in the form of an emulsion of the type water-in-oil. __________________________________________________________________________________________ GS 338 : 2003 67. 67.100. 1 Specification for Gouda 3 Pages Gr 1 Applies to the principal characteristics of gouda chesse ready for consumption.30 2 Pages Gr 1 This specification applies to emmentaler cheese ready for consumption. 1 Specification for Edam 67. 1 Specification for Samsoe.100. 1 Specification for Danbo 67.30 2 Pages Gr 1 Specifies the principal characteristics of samsoe cheese ready for consumption. 67.30 3 Pages Gr 1 This specification applies to edam cheese ready for consumption.100. __________________________________________________________________________________________ GS 344 : 2003 67. __________________________________________________________________________________________ GS 346 : 2003 Ed.100. 1 Specification for Emmentaler. __________________________________________________________________________________________ GS 342 : 2003 Ed. __________________________________________________________________________________________ GS 343 : 2003 Ed.30 2 Pages Gr 1 This standard applies to danbo cheese for direct consumption. 67.100.100. __________________________________________________________________________________________ GS 345 : 2003 Ed. __________________________________________________________________________________________ 24 . __________________________________________________________________________________________ GS 347 : 2003 Ed. 1 Specification for Cheddar. 67.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 341 : 2003 Ed. 1 Specification for Havarti.30 Ed.30 2 Pages Gr 1 This standard specifies the principal characteristics of cheddar cheese ready for consumption.30 3 Pages Gr 1 This standard applies to havarti cheese intended for direct consumption. __________________________________________________________________________________________ 25 . creamed cottage cheese. 1 Specification for Cottage Cheese.100.100.30 2 Pages Gr 1 This standard applies to brie cheese .30 3 Pages Gr 1 This standard specifies the principal characteristics of tilsiter cheese ready for consumption. 1 Specification for Provolone.100. including Creamed Cottage Cheese.30 3 Pages Gr 1 Specifies the principal characteristics of camembert cheese.100.30 3 Pages Gr 1 This standard applies to Saint-Paulin cheese.100.flat cylindrical shaped cheese. __________________________________________________________________________________________ GS 354 : 2003 Ed. flat cylindrical shaped cheese covered with white mould (penicillium caseicolum). 1 Specification for Coulommiers.100. 1 Specification for Tilsiter 67.30 2 Pages Gr 1 This standard specifies the principal characteristics of coulommiers cheese and ready for consumption. covered with white mould (Penicillium Caseicolum). 67. 3 Pages Gr 1 Specifies cottage cheese or in the case of a cheese conforming to the additional requirements there for.100. 67. 1 Specification for Brie 67. 1 Specification for Camembert. __________________________________________________________________________________________ GS 352 : 2003 Ed. __________________________________________________________________________________________ GS 349 : 2003 Ed. dry or slightly humid rind sometimes wrapped in a plastic film or covered with wax. 1 Specification for Saint .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 348 : 2003 Ed. __________________________________________________________________________________________ GS 351 : 2003 67. __________________________________________________________________________________________ GS 353 : 2003 Ed.30 2 Pages Gr 1 This standard applies to provolone "pasta filata" cheese used as a table or grating cheese and may be consumed either fresh or aged. __________________________________________________________________________________________ GS 350 : 2003 Ed.Paulin. 67.30 Ed. 67. 67.10. __________________________________________________________________________________________ GS 362 : 2001 Ed.Code of Practice for Organic Farming. 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 355 : 2003 Ed. 1 Quality Management Systems . 1 Specification for Processed Cheese and Spreadable Processed Cheese.100.30 Ed.100. fish. half cream. whipped cream and double cream subjected to pasteurization. __________________________________________________________________________________________ GS 361 : 2003 Ed. 65. 1 Specification for Whey Cream for Direct Consumption. melting and emulsifying with the aid of heat and emulsifying agents.40 3 Pages Gr 1 Applies to cream.120. one or more varieties of cheese. slightly brittle.30 2 Pages Gr 1 Specifies the principal characteristics of the cheese . animals. whipping cream. 1 Non-Ducted Air Conditioners . 03. 4 Pages Gr 1 Specifies variety processed cheese and spreadable processed cheese made by grinding. __________________________________________________________________________________________ GS 357 : 2003 Ed. crops. 3 Pages Gr 1 Specifies processed cheese and spreadable processed cheese are made by grinding. 1 Specification for Extra Hard Grating Cheese.020. melting and emulsifying with the aid of heat and emulsifying agents one or more varieties of cheese. mixing. __________________________________________________________________________________________ GS 358 : 2003 67. crustacean and products thereof. 1 Specification for Named Variety Processed Cheese and Spreadable Processed Cheese. suitable for grating with a curing period of at least six months.120 36 Pages Gr 4 It specifies the standard conditions on which the ratings of single-package and split-system non-ducted air conditioners employing air-cooled condensers are based. dry.30 Ed.100.Testing Rating for Performance 23. mixing.100. and the test methods to be applied for determination of the various ratings __________________________________________________________________________________________ 26 . that is. __________________________________________________________________________________________ GS 359 : 2003 67.extra hard.01 13 Pages Gr 2 Establishes the minimum conditions necessary for the certification and management of organic holdings. 20 Ed. __________________________________________________________________________________________ GS 367 : 2003 67. 67. methods of sampling and test for mineral solvents for use in paints and varnishes for other purposes __________________________________________________________________________________________ GS 370 : 2003 67.100. Gr 1 This standard applies to processed cheese food or processed cheese spread made by grinding.Specifications and Guidelines for Application. 3 Pages Gr 1 Applies to cheeses in brine.040 Ed. melting and emulsifying with the aid of heat and emulsifying agents. and the moulding of the concentrated product.30 2 Pages Gr 1 Applies to all products intended for direct consumption or further processing. __________________________________________________________________________________________ 27 . intended for direct consumption or further processing.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 363 : 2003 Ed. with or without the addition of milk.which may be coated. cream or other raw materials of milk origin.100.30 6 Pages Gr 1 Applies to cheese . 1 Ghana Standards Board Mark of Conformity .30 Ed. 1 Specification for Whey Cheese. __________________________________________________________________________________________ GS 371 : 2003 Ed. 1 Specification for Cheeses in Brine. 1 Specification for Cheese 67.100. 1 Paint and vanishes . 1 Specification for Processed Cheese Preparations (Processed) Cheese Food and 3 Pages Processed Cheese Spread.30 Ed.Specification for Mineral Solvent ( Turpentine) for Paints and other Purposes 6 Pages Gr 1 this standard specifies the requirements. __________________________________________________________________________________________ GS 369 : 2006 87. mixing. it’s a semi-solid product obtained by the concentration of whey. and in which the whey protein/casein ratio does not exceed that of milk.100.120. 5 Pages Gr 1 Lays down specifications for the Ghana Standards Board's Certification Mark to be applied to products certified under Ghana Standards Board's certification mark scheme.ripened or unripened soft or semi-hard. hard and extra hard . __________________________________________________________________________________________ GS 364 : 2001 03. 100. botrytis L. __________________________________________________________________________________________ 28 . intended for direct consumption or further processing. clean.080 8 Pages Gr 1 This standard shall apply to quick frozen French Fried potatoes which have been prepared from tubers of the species Solanum tuberosum L. whole auxiliary buds of the plants conforming to the characteristics of Brassica oleracea L. and which have been trimmed. 1 Specification for Quick Frozen Brussels Sprouts 67. edible parts of the leek plant conforming to the characteristics of the species Allium porrum L. __________________________________________________________________________________________ GS 401 : 2003 Ed.. 1 Specification for Edible Casein Products 67. _________________________________________________________________________________________ GS 386 : 2003 Ed.080 7 Pages Gr 1 Applies to quick frozen Brussels Sprouts as a product prepared from fresh. __________________________________________________________________________________________ GS 410 : 2003 67. 1 Specification for Milk Powders and Cream Powder 67.080 8 Pages Gr 1 This standard applies to quick frozen cauliflower as a product prepared from fresh. washed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 378 : 2003 Ed.080 Ed. 1 Specification for Quick Frozen French Fried Potatoes 67.100. clean.10 5 Pages Gr 1 Applies to milk powders and cream powder. 1 Specification for Quick Frozen Leek 8 Pages Gr 1 Applies to quick frozen leek as a product prepared from fresh. clean.10 5 Pages Gr 1 Applies to edible acid casein. 1 Specification for Quick Frozen Cauliflower 67. sound. possibly blanched to ensure adequate stability of colour and flavour during normal marketing cycles. edible rennet casein and edible caseinate. intended for direct consumption. sound. sound heads of the cauliflower plant conforming to the characteristics of the species Brassica oleracea L. var. __________________________________________________________________________________________ GS 380 : 2003 Ed. and offered for direct consumption without further processing except for repacking if required. __________________________________________________________________________________________ GS 405 : 2003 Ed. roots of carrot varieties (cultivars) conforming with the characteristics of the species carota L.100. __________________________________________________________________________________________ 29 .080 55. 1 Specification for Quick Frozen Peas 67. ripe and stemmed raspberries of firm texture conforming to the characteristics of Rubus idaeus L .080 5 Pages Gr 1 This standard applies to quick frozen peas as a product from fresh. 1 Specification for Quick Frozen Carrots 67. whole. __________________________________________________________________________________________ GS 439 : 2003 Ed. clean. clean sound stalks or shoots of the broccoli plant conforming to the characteristics of the species Brassica oleracea L.080 8 Pages Gr 1 Applies to quick frozen broccoli as a product prepared from fresh. _________________________________________________________________________________________ GS 428 : 2003 Ed. 1 Specification for Quick Frozen Broccoli 67. 1 Specification for Quick Frozen Green Beans and Quick Frozen Wax Beans 67. clean.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 417 : 2003 Ed. sound. __________________________________________________________________________________________ GS 433 : 2003 Ed. sound. clean. immature seeds of peas which have been washed.140.99 6 Pages Gr 1 This standard shall apply to quick frozen raspberries as a product prepared from fresh. 1 Specification for Quick Frozen Raspberries 67.080 9 Pages Gr 1 Applies to quick frozen green beans and quick frozen wax beans as a product prepared from fresh. methods of sampling and test for PVC bottles used for packaging of edible oil. clean.080 11 Pages Gr 2 This standard applies to quick frozen carrots as a products prepared from fresh. succulent pods of the plants conforming to the characteristics of suitable varieties of the species Phaseolus vulgaris L. __________________________________________________________________________________________ GS 442 : 2004 Polyvinyl Chloride (PVC) Bottles for Packaging Edible Oil 7 Pages Gr 1 Specifies the requirements. __________________________________________________________________________________________ GS 447 : 2003 Ed. sound. sound. 83. sufficiently blanched to ensure adequate stability of colour and flavour during normal marketing cycles and which conform to the characteristics of the species Pisum sativum L. on . convar.080 10 Pages Gr 1 Applies to quick frozen corn . __________________________________________________________________________________________ GS 480 : 2003 Ed. clean. sound. clean. 1 Specification for Quick Frozen Peaches 8 Pages Gr 1 Applies to quick frozen peaches as a product prepared from fresh. properly matured whole or pieces of ears conforming to the characteristics of the sweet corn variety Zea mays L. 1 Specification for Quick Frozen Spinach 67. 1 Specification for Quick Frozen Bilberries 67.the Cob 67.080 6 Pages Gr 1 Applies to quick frozen whole kernel corn as a product prepared from fresh. __________________________________________________________________________________________ GS 466 : 2003 Ed. __________________________________________________________________________________________ 30 . sound. sound edible parts of the spinach plant conforming to the characteristics for the species Spinacia oleracea L. sound. clean.the . clean. and which have been sorted washed.cob of the species as a product prepared from fresh.080 6 Pages Gr 1 Applies to quick frozen blueberries as a product prepared from fresh. __________________________________________________________________________________________ GS 465 : 2003 Ed. properly ripened fruit conforming to the characteristics of prunus persica L. ripe bilberries of firm texture conforming to the characteristics vaccinium myrtillus L.080 7 Pages Gr 1 This standard applies to quick frozen spinach as a product prepared from fresh. sufficiently blanched to ensure adequate stability of colour and flavour during normal marketing cycles and properly drained. Saccharata Koern of either the white or yellow varieties by removing husk and silk. ripe and stemmed blueberries of firm texture. 1 Specification for Quick Frozen Corn . sound. __________________________________________________________________________________________ GS 464 : 2003 Ed. conforming to the characteristics of Vaccinium corymbosum L. with or without a dry sugar or a syrup and is packaged and frozen in an appropriate manner.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 67.080 6 Pages Gr 1 Applies to quick frozen bilberries of the species as a product prepared from fresh.080 GS 461 : 2003 Ed. 1 Specification for Quick Frozen Whole Kernel Corn 67.on . 1 Specification for Quick Frozen Blueberries 67. clean whole sound succulent kernels of sweet corn species Zea mays L. __________________________________________________________________________________________ GS 468 : 2003 Ed. 67.250 Ed. ripe and stemmed strawberries of firm texture conforming to the characteristics of Fragaria grandiflora L.Specification for Jute Sacks 55.10 13 Pages Gr 2 Applies to nineteen vegetable oils presented in a state for human consumption. 1 Methods of Test for the Determination of Specific and/or Overall Migration of Constituentts of Plastic 2 Pages Materials intended to come into Contact with Foodtact with Food. __________________________________________________________________________________________ GS 525 : 2003 Ed.01 4 Pages Gr 1 This standard specifies the requirements for sweet pepper of varieties (cultivars) grown from Capsicum anum L to be supplied fresh to the consumer.080 6 Pages Gr 1 This standard specifies the general characteristics. Pharmaceuticals and Drinking Water Gr 1 Specifies the method of test for the determination of specific and overall migration of the constituents of plastic materials intended to come into contact with Food Pharmaceuticals and Drinking Water __________________________________________________________________________________________ 31 .67. __________________________________________________________________________________________ GS 534 : 2004 83. 1 Fresh Fruits and Vegetables . 1 Textiles .20 5 Pages Gr 1 Specifies the requirements for commercial varieties of sweet potato grown to be supplied fresh to the consumer. sound. 67.200.080.080. 1 Packaging . __________________________________________________________________________________________ GS 527 : 2008 Ed. 1 Specification for Named Vegetable Oils.40 17 Pages Gr 2 This standard specifies the requirerments sampling procedures and test methods for tarpaulins that have been impregnated and /or coated to render them water resistant and rot resistant.080.Specification for Tarpaulins 59.080 6 Pages Gr 1 Applies to quick frozen strawberries as a product prepared from fresh. 1 Specification for Quick Frozen Strawberries.Specification for Sweet Potato 67. Sweet pepper for industrial processing is excluded __________________________________________________________________________________________ GS 533 : 2004 Ed. __________________________________________________________________________________________ GS 494 : 2008 Ed. intended for packaging cocoa beans and other agricultural products _________________________________________________________________________________________ GS 528 : 2004 Ed. 1 Fresh Fruits and Vegetables . or Fragaria vesca L.080. requirements and methods of sampling and test for woven jute sacks having filling mass up to 70kg.Specification for Sweet Pepper 67. clean.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 485 : 2003 Ed. Specification for Mango 67.140.01 4 Pages Gr 1 This standard specifies the requirements for commercial varieties of papaya grown from Carice papaya / entering the domestic and international trade in the fresh natural state.01 5 Pages Gr 1 This standard specifies the requirements for mangoes of varieties (cultivers) grown from Mangifera indica L of the Nacardaceae family.160. __________________________________________________________________________________________ GS 564 : 2003 67. It also specifies grading and sampling of fresh papaya. Commercial butane __________________________________________________________________________________________ GS 536 : 2002 27. It applies to stand alone systems with PV array size from 20 W to 500 W. It also specifies grading and sampling for fresh mangoes.080.080. entering the domestic and International trade in the fresh natural state. __________________________________________________________________________________________ GS 545 : 2004 Ed. 1 Fresh Fruits and Vegetables .20 5 Pages Gr 1 Specifies the requirements for commercial sweet varieties of cassava roots grown from Manihot esculenta Crantz of the Euphorbiaceae family. 2 Pages Gr 1 Specifies the soft unripened cheese possessing a mild creamy or acid flavour and aroma typical of a milk product cultured with lactic acid and aroma producing bacteria.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 75. 1 Specification for Cream Cheese (Rahmfrischkase).30 Ed. 1 Fresh Fruits and Vegetables . __________________________________________________________________________________________ GS 547 : 2008 Ed.30 8 Pages Gr 1 This standard specifies requirements for cocoa beans __________________________________________________________________________________________ GS 560 : 2004 Ed.30 GS 535 : 2005 Petroleum and Petroleum Products -Specification for Liquefied Petroleum Gases 6 Pages Gr 1 This standard specifies requirements for the following: Liquefied petroleum gas mixture. to be supplied fresh to the consumer. 1 Fresh Fruits and Vegetables . Papaya for industrial processing are excluded __________________________________________________________________________________________ GS 546 : 2004 Ed. Cassava for industrial processing is excluded. Mangoes for industrial processing are excluded. 1 Cocoa and Cocoa Products. __________________________________________________________________________________________ 32 .Specification for Cocoa Beans 67. 1 Electrical Generating Systems . Commercial propane .080.Specification for Sweet Cassava 67.Standardized Requirement for the Application of 14 Pages Photovoltaic (PV) Systems in Ghana Gr 2 This standard specifies the minimum requirements for the components of photovoltaic systems and their installation. after preparation and packaging.100.Specification for Papaya 67.160 Ed. 1 Specification for Tea 67.Specification for Cassava Starch for Industrial use 14 Pages Gr 2 It specifies the requirements. Pulses and Derived products . 1 Cereals.060 67.20 Ed. __________________________________________________________________________________________ GS 577 : 2009 Specification for Corn Flakes 5 pages Gr 1 This standard specified the requirements for corn flakes produced from matured.060 5 Pages Gr 1 This standard specifies the requirements. __________________________________________________________________________________________ GS 570 : 2007 Ed. methods of sampling and test for cassava starch for industrial use.Code of Practice for Canned Fish 12 Pages Gr 2 This code of practice offers general advice concerning the production of canned fish and shellfish and products thereof.120. packed in hermetically sealed rigid or semi-rigid containers.Specification for Baking Powder 67.180.060 67.30 4 Pages Gr 1 This standard specifies the requirements. which have been heat treated after sealing to such an extent that the product is shelf stable and presents no hazard to public health.140.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 568 : 2002 Fish and Fishery Products . __________________________________________________________________________________________ 33 . 1 Industrial Chemicals . This standard is applicable specifically to plain corn flakes but does not apply to sugar glazed or corn flakes with fruits and nuts __________________________________________________________________________________________ GS 579 : 2007 Ed. 1 Food Technology .10 5 Pages Gr 1 This standard specifies the requirements.Specification for Pasta 67.220. methods of sampling and test for baking powder Intended for use as a raising agent in foods for human consumption __________________________________________________________________________________________ GS 572 : 2007 Ed. methods of sampling and test for tea __________________________________________________________________________________________ GS 576 : 2003 Specification for Oats 4 Pages Gr 1 This standard applies to oats grains as the grains of Avena sativa byzantina. clean and sound corn grains and is intended for human consumption. methods of sampling and test for pasta made from semolina or whole durum wheat flour and is intended to be cooked before consumption __________________________________________________________________________________________ GS 584 : 2003 67.20 67. 10 Ed. __________________________________________________________________________________________ GS 599 : 2008 83. 1 Soaps and Detergents .01 Ed. namely the homopolymer. 1 Plastics .01 Ed.160.Transmittance and Total Light 7 Pages Reflectance Gr 1 Specifies the method of tests for light transmittance and total light reflectance of plastics materials __________________________________________________________________________________________ GS 595 : 2004 83.080. 1 Beverages . __________________________________________________________________________________________ GS 606 : 2008 71. to be supplied fresh to the consumer. Pharmaceuticals and 6 Pages Drinking Water Gr 1 Covers positive list of constituents of polyethylene.40 Ed. manufacturing residues and auxiliary additives . to be supplied fresh to the consumer. after preparation and packaging.080. __________________________________________________________________________________________ GS 590 : 2007 67.Specification for Powdered Laundry Detergents for Household use 17 Pages Gr 2 This standard prescribes the requirements and methods of sampling and test for laundry detergent powders for household use __________________________________________________________________________________________ 34 . Ginger for industrial processing is excluded.080. 1 Replaces GS CODEX STAN 218:1999 Fresh Fruits and Vegetables . copolymers.250 Ed.Alcoholic Beverages .080.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 588 : 2004 Ed.Specification for Wine . methods of sampling and tests for blended alcoholic drinks flavoured with wine essence __________________________________________________________________________________________ GS 591 : 2004 83. 1 Positive list of Constituents of Polyethylene in contact with Food.Specification for Fresh Hot Peppers 67.Specification for Ginger 67.Specification for Polyethylene (PE) materials for Moulding and Extrusion 9 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for polyethylene materials for molding and extrusion __________________________________________________________________________________________ GS 604 : 2004 Ed. 1 Methods of Test for Optical Properties of Plastic .080. 1 Fresh Fruits and Vegetables .Flavoured Alcoholic Drinks 4 Pages Gr 1 This standard specifies the requirements. Hot peppers for industrial processing are excluded.100.01 4 Pages Gr 1 Specifies requirements for rhizome of the commercial varieties of ginger grown from Zingiber officinale Roscoe of the Zingiberaceae family.67.01 4 Pages Gr 1 Specifies the requirements for hot peppers of varieties grown form Capsicum annuum L and Capsicum frutescens L. terpolymers and blends of these polymers. 080 67.10 67. for use as binders. __________________________________________________________________________________________ 67. 1 Plastics . __________________________________________________________________________________________ GS 632 : 2003 Ed. preparation and/or grading.Specification for Bouillon (Soup and Gravy Bases) 67.processed (NP) or semi-processed (SP) pepperb) pepper sold by the producing country after cleaning.Part 1 : Black 8 Pages Pepper Gr 1 This standard specifies requirements for black pepper whole or ground . be re-sold directly to the consumers. filler and/or thickener.220. mugs. bowls and other similar wares.Specification for Whole or Ground Pepper .industries etc.which can in certain cases.10 5 Pages Gr 1 This standard specifies the requirements for cubes or granulated vegetable protein bouillon and powdered. 1 Spices and Condiments .Specification for Dehydrated Onion 6 Pages Gr 1 This standard specifies requirements for dehydrated onion (Allium cepa Linnaeus) in its various commercial forms. plates.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 613 : 2007 55. saucers. __________________________________________________________________________________________ GS 675 : 2007 Ed. paper. __________________________________________________________________________________________ GS 682 : 2003 Spices and Condiments . methods of sampling and test for all purpose cassava starch -food pharmaceuticals.moulded plastics cups.060. cubed.100 Ed. tumblers.10 Spices and Condiments . __________________________________________________________________________________________ GS 658 : 2003 Spices and Condiments.180.Specification for Compression and Injection .220.20 35 . without preparation or grading.called processed(P) pepper".Moulded Plastic Household Wares for Food Contact Applications 18 Pages Gr 2 This standard specifies the requirements.50 14 Pages Gr 2 Specifies the requirements and methods of test for salt for industrial use. trays.Specification For Mustard Seed 12 Pages Gr 2 This standard specifies requirements for mustard seed. chicken.220. __________________________________________________________________________________________ GS 683-1 : 2003 67.Specification for Sodium Chloride for Industrial use 71.called "non. excluding food and medical applications. or pasta beef.at the following commercial stages: a) Pepper sold by producing country without cleaning or after a partial cleaning. texturing agent. ham fish and other proteinaceous foods flavoured bouillon __________________________________________________________________________________________ GS 676 : 2004 Specification For Cassava Starch 18 Pages Gr 2 This standards specifies the requirements. methods of sampling and test for compression and injection . 1 Industrial Chemicals . Specification for Whole.Specification for Whole or Ground Pepper . __________________________________________________________________________________________ 36 . __________________________________________________________________________________________ GS 687 : 2003 Spices and Condiments .10 67. which is used as a flavouring ingredient in the preparation of foods __________________________________________________________________________________________ GS 690 : 2003 67.Specification for Whole or Broken Nutmeg and Whole or Pieces 7 Pages Mace Gr 1 This standard specifies requirements for nutmeg.10 Spices and condiments .220.220. or ground.at the following commercial stages: a) Semi. obtained from the nutmeg tree for wholesale commercial purposes.220. __________________________________________________________________________________________ GS 686 : 2003 Spices and Condiments .Specification for Aniseed 4 Pages Gr 1 This standard specifies requirements for whole aniseed __________________________________________________________________________________________ GS 689 : 2003 Spices and Condiments . __________________________________________________________________________________________ GS 684 : 2003 Spices and Condiments .220. in Spices or Ground Ginger 7 Pages Gr 1 This standard specifies requirements for ginger whole.b) Processed (P).Specification for Dehydrated Garlic 6 Pages Gr 1 This standard specifies the requirements for dehydrated garlic __________________________________________________________________________________________ GS 688 : 2003 Spices and Condiments .220. 9 Pages Gr 1 This standard specifies the requirements for peppercorns in brine.Part 2 : White 6 Pages Pepper Gr 1 This standard specifies requirements for white pepper whole or ground .Specification for Peppercorns in Brine.10 Spices and Condiments .10 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 683-2 : 2003 67.10 67.10 67. and for mace.10 67. in pieces.220.Specification for Curry Powder 9 Pages Gr 1 This standard specifies the requirements for curry powder.processed (SP). whole or broken.220. whole or in pieces. CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 691 : 2003 67.220.10 Spices and Condiments - Specification for Cinnamon, Sri Lankan, Seychelles and 3 Pages Madagascan types Gr 1 This standard specifies requirements foe whole or ground (powdered) cinnamon of the Sri Lankan type and Madagascan type, Seychelles type, which is the bark of the tree or shrub __________________________________________________________________________________________ GS 692 : 2003 67.220.10 Spices and Condiments - Specification for Whole and Ground (Powdered) Cloves 5 Pages Gr 1 This standard specifies requirements for whole and ground (powdered) cloves __________________________________________________________________________________________ GS 693 : 2003 Spices and Condiments - Specification for Whole Chillies and Capsicums. 3 Pages Gr 1 This standard specifies requirements for chillies and capsicums in the whole or ground (powdered) form. __________________________________________________________________________________________ GS 694 : 2003 67.220.10 67.220.10 Spices and Condiments - Specification for Whole or Ground (Powdered) Coriander 5 Pages Gr 1 This standard specifies the requirements for coriander in the whole and ground (powdered ) forms. __________________________________________________________________________________________ GS 695 : 2003 67.220.10 Spices and Condiments - Specification for Whole Black Caraway and Blond Caraway 4 Pages Gr 1 This standard specifies requirements for whole black and blond caraway having biennial and annual fructification respectively. __________________________________________________________________________________________ GS 696 : 2003 67.220.10 Spices and Condiments - Specification for Whole or Ground Dried Oregano Leaves 5 Pages Gr 1 This standard specifies requirements for processed or semi- processed dried oregano leaves of Origanum genus, species and sub species ,excluding Origanum majorana, in the whole or ground (powdered) form. __________________________________________________________________________________________ GS 697 : 2003 Spices and Condiments - Specification for Dried Peppermint 7 Pages Gr 1 This standard specifies requirements for dried leaves, or broken or rubbed dried leave, of peppermint. The term dried mint includes dehydrated mint, i.e. artificially dried mint. __________________________________________________________________________________________ 67.220.10 37 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 698 : 2003 Spices and Condiments - Specification for Dehydrated Green Pepper 4 Pages Gr 1 This standard specifies the requirements for dehydrated green pepper __________________________________________________________________________________________ GS 699 : 2003 Spices and Condiments - Specification for Dried Thyme 4 Pages Gr 1 This standard specifies the requirements for dried thyme ( Thymus vulgaris L. ) leaves in the rubbed form. __________________________________________________________________________________________ GS 700 : 2003 Spices and Condiments - Specification for Dried Mint 4 Pages Gr 1 This standard specifies requirements for leaves of dried mint ( spearmint) in whole, broken or rubbed form __________________________________________________________________________________________ GS 701 : 2003 67.220.10 67.220.10 67.220.10 67.220.10 Spices and Condiments - Specification for Capsules and Seeds of Large Cardamom 4 Pages Gr 1 This standard specifies requirements for large cardamom as capsules and seeds ( Amomum subulatum Roxb.) __________________________________________________________________________________________ GS 704 : 2003 67.160.20 Ed. 1 Non-Alcoholic Beverages - Specification for Pineapple Juice Preserved Exclusively by 4 Pages Physical Means. Gr 1 This standard applies to unfermented but fermentable juice, intended for direct consumption, obtained by a mechanical process, which may include centrifuging but not filtering, from the flesh or parts thereof, with or without core material, of sound, ripe pineapples (Ananas comosus L. Merill=Ananas sativus L. Lindl) preserved exclusively by physical means. __________________________________________________________________________________________ GS 705 : 2003 Ed. 1 Specification for Grape Juice Preserved Exclusively by Physical Means. 67.160.20 4 Pages Gr 1 This standard specifies the unfermented but fermentable juice, intended for direct consumption, obtained by a mechanical process from sound, ripe grapes preserved exclusively by physical means. __________________________________________________________________________________________ GS 706 : 2003 67.160.20 Ed. 1 Non-Alcoholic Beverages - Specification for Orange Juice Preserved Exclusively by 4 Pages Physical Means. Gr 1 This standard applies to unfermented but fermentable juice, intended for direct consumption, obtained by a mechanical process from the endocarp of sound, ripe oranges (Citrus sinensis (L.) Osbeck) preserved exclusively by physical means. __________________________________________________________________________________________ 38 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 707 : 2003 Ed. 1 Specification for Apple Juice Preserved Exclusively by Physical Means 67.160.20 4 Pages Gr 1 this standard applies to unfermented but fermentable juice, intended for direct consumption, obtained by mechanical process from sound, ripe apples (Pyrus malus L.) preserved exclusively by physical means. __________________________________________________________________________________________ GS 708 : 2003 Ed. 1 Replaces GS 6:1970 Specification for Grapefruit Juice Preserved Exclusively by Physical Means. 67.160.20 4 Pages Gr 1 Specifies unfermented but fermentable juice, intended for direct consumption obtained by a mechanical process from the endocarp of sound, ripe grapefruit preserved exclusively by physical means. __________________________________________________________________________________________ GS 709 : 2003 67.160.20 Ed. 1 Specification for Concentrated Grape Juice Preserved Exclusively by Physical Means. 4 Pages Gr 1 Applies to concentrated grape juice as an unfermented product which is capable of fermentation after reconstitution; preserved exclusively by physical means, obtained by the process of concentration from the raw material. __________________________________________________________________________________________ GS 710 : 2003 67.160.20 Ed. 1 Specification for Nectar of certain Citrus Fruits Preserved Exclusively by Physical 4 Pages Means. Gr 1 Applies individually to nectars made from the following species of citrus fruits: orange, mandarine and grape fruits. __________________________________________________________________________________________ GS 711 : 2003 67.160.20 Ed. 1 Specification for Apricot, Peach and Pear Nectars Preserved Exclusively by Physical 4 Pages Means Gr 1 Applies to unfermented but fermentable pulpy product, intended for direct consumption, obtained by blending the total edible part of sound and ripe apricots, peaches or pears, concentrated or unconcentrated, with water and sugars or honey and preserved exclusively by physical means. __________________________________________________________________________________________ GS 712 : 2003 Ed. 1 Specification for Guava Nectar Preserved Exclusively by Physical Means. 67.160.20 4 Pages Gr 1 Applies to unfermented but unfermentable pulpy or non-pulpy product, intended for direct consumption, obtained by blending guava juice and/or the total edible sieved or ground or homogenized product of sound, ripe guavas concentrated or unconcentrated, with water and sugars or honey and preserved exclusively by physical means. __________________________________________________________________________________________ GS 713 : 2003 67.160.20 Ed. 1 Specification for Concentrated Pineapple Juice Preserved Exclusively by Physical Means. 4 Pages Gr 1 Specifies the concentrated pineapple juice which is capable of fermentation after reconstitution, obtained from the raw material through the process of concentration and preserved exclusively by physical means. __________________________________________________________________________________________ 39 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 714 : 2003 Ed. 1 Specification for Concentrated Pineapple Juice with Preservatives. 67.160.20 4 Pages Gr 1 Specifies the concentrated pineapple juice with preservatives, for manufacturing the unfermented product obtained from the raw material through the process of concentration . __________________________________________________________________________________________ GS 715 : 2003 67.160.20 Ed. 1 Specification for Concentrated Orange Juice Preserved Exclusively by Physical Means 4 Pages Gr 1 Applies to concentrated orange Juice as an unfermented product which is capable of fermentation after reconstitution, preserved exclusively by physical means. __________________________________________________________________________________________ GS 716 : 2003 67.160.20 Ed. 1 Specification for Concentrated Apple Juice Preserved Exclusively by Physical Means 4 Pages Gr 1 Applies to concentrated apple juice as an unfermented product which is capable of fermentation after reconstitution preserved exclusively by physical means. __________________________________________________________________________________________ GS 717 : 2003 67.160.20 Ed. 1 Specification for Liquid Pulpy Mango Products Preserved Exclusively by Physical Means. 4 Pages Gr 1 Specifies unfermented but fermentable pulpy product, intended for direct consumption, obtained by blending the total edible sieved or ground or homogenized product of sound, ripe mangoes. __________________________________________________________________________________________ GS 718 : 2003 67.160.20 Ed. 1 Specification for Concentrated Black Currant Juice Preserved Exclusively by Physical 3 Pages Means Gr 1 This standard applies to blackcurrant juice as an unfermented product which is capable of fermentation after reconstitution, preserved exclusively by physical means. __________________________________________________________________________________________ GS 719 : 2003 67.160.20 Ed. 1 Specification for Black Currant Juice Preserved Exclusively by Physical Means 4 Pages Gr 1 Unfermented but fermented juice, intended for direct consumption, obtained by a mechanical process from sound, ripe blackcurrant (Ribes nigrum L.) preserved exclusively by physical means. __________________________________________________________________________________________ GS 720 : 2003 Ed. 1 Specification for Lemon Juice Preserved Exclusively by Physical Means. 67.160.20 3 Pages Gr 1 Applies to unfermented but fermentable juice intended for direct consumption, obtained by a mechanical process from the endocarp of sound, ripe lemons preserved exclusively by physical means. __________________________________________________________________________________________ 40 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 721 : 2003 67.160.20 Ed. 1 Specification for Non - Pulpy Blackcurrant Nectar Preserved Exclusively by Physical Means 4 Pages Gr 1 Unfermented but fermented product, intended for direct consumption, obtained by blending the juice of sound and ripe blackcurrants concentrated or unconcentrated with water and sugars or honey, and preserved exclusively by physical means. __________________________________________________________________________________________ GS 722 : 2003 67.160.20 Ed. 1 Specification for Concentrated Labrusca Type Grape Juice Preserved Exclusively by 4 Pages Physical Means. Gr 1 Applies to the sweetened concentrate which is made from labrusca type grape juices and which has the essential flavour characteristics of labrusca type grapes and which is prepackaged for retail sale. __________________________________________________________________________________________ GS 723 : 2003 67.160.20 Ed. 1 Specification for Fruit Nectars Preserved Exclusively by Physical Means not Covered by 4 Pages Individual Standards. Gr 1 Applies to pulpy and non-pulpy fruit nectars, made from fruit of a single species. __________________________________________________________________________________________ GS 724 : 2003 67.160.20 Ed. 1 General Specification for Fruit Juices Preserved Exclusively by Physical Means 4 Pages Gr 1 Applies to fruit juices, made from fruit of a single species. __________________________________________________________________________________________ GS 725 : 2003 Ed. 1 Specification for Vegetable Juices. 67.160.20 4 Pages Gr 1 Applies to all vegetable juices, the liquid unfermented or fermentable product intended for direct consumption obtained from the edible parts of roots, corms, tubers, stems, shoots, leaves and flowers and legumes. __________________________________________________________________________________________ GS 726 : 2003 67.160.20 Ed. 1 Specification for Pulpy Nectars of certain small Fruits Preserved Exclusively by Physical Means. 5 Pages Gr 1 Applies individually to pulpy nectars made from berries of the bilberries, blackberries, blackcurrants, cloudberries. __________________________________________________________________________________________ GS 727 : 2003 Ed. 1 Specification for Tomato Juice Preserved Exclusively by Physical Means. 67.160.20 5 Pages Gr 1 Specifies the unfermented but fermentable juice, intended for direct consumption, obtained by a mechanical process from sound ripe, red or reddish tomatoes preserved exclusively by physical means, the juice being strained free from skins, seeds and other coarse parts of tomatoes. __________________________________________________________________________________________ 41 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 728 : 2003 Ed. 1 Specification for Pearl Millet Flour 67.060 4 Pages Gr 1 This standard applies to flour destined for direct human consumption which is obtained from pearl millet Pennisetum americanum L., Senegalese varieties "souna" and "sanio". __________________________________________________________________________________________ GS 729 : 2003 Ed. 1 Specification for Degermed Maize (Corn) Meal and Maize (Corn) Grits 67.060 4 Pages Gr 1 This standard applies to degermed maize (corn) meal and to degermed maize (corn) grits for direct human consumption milled from kernels of common maize, Zea mays L. __________________________________________________________________________________________ GS 730 : 2003 Ed. 1 Specification for Couscous 67.080 4 Pages Gr 1 This standard applies to couscous as a product prepared from durum wheat semolina (Triticum durum) the element of which are bound by adding portable water and which has undergone physical treatment such as cooking and drying. __________________________________________________________________________________________ GS 731 : 2003 Ed. 1 Specification for Certain Pulses 67.060 6 Pages Gr 1 This standard applies to the whole, shelled or split pulses such as dry seeds of leguminous plants which are distinguished from leguminous oil seeds by their low fat content. __________________________________________________________________________________________ GS 732 : 2003 Ed. 1 Specification for Sorghum Flour 67.080 5 Pages Gr 1 This standard applies to sorghum flour destined for direct human consumption. __________________________________________________________________________________________ GS 733 : 2003 67.060 Ed. 1 Specification for Wheat and Durum Wheat 6 Pages Gr 1 This standard applies to wheat grains and durum wheat grains intended for processing for direct consumption. __________________________________________________________________________________________ GS 734 : 2003 Ed. 1 Specification for Whole and Decorticated Millet Grains. 67.060 5 Pages Gr 1 Applies to whole and decorticated pearl millet destined for human consumption which is obtained from Pennisetum americannum L. __________________________________________________________________________________________ 42 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 735 : 2003 Ed. 1 Specification for Maize (Corn) Meal. 67.060 4 Pages Gr 1 Applies to whole maize(corn) meal for direct human consumption prepared from kernels of common maize, Zea mays L. __________________________________________________________________________________________ GS 736 : 2007 Ed. 1 Cocoa and Cocoa Product - Specification for Cocoa Butter Confectionery 67.140.30 4 Pages Gr 1 This standard applies to homogeneous product prepared from cocoa butter, milk products and sugars for direct consumption __________________________________________________________________________________________ GS 737 : 2007 67.190 Ed. 1 Cocoa and Cocoa Products - Specification for Composite and Filled Chocolate 5 Pages Gr 1 Applies to composite and filled chocolate to which ingredients have been added in order to modify in a characteristic manner the organoleptic properties of the final product, and to products which have an external chocolate portion and a clearly distinct centre. __________________________________________________________________________________________ GS 738 : 2007 67.140.30 Ed. 1 Cocoa and Cocoa Products - Specification for Cocoa Butter 3 Pages Gr 1 This standard applies exclusively to cocoa butter used as ingredient in the manufacture of chocolate and chocolate products. __________________________________________________________________________________________ GS 739 : 2007 67.140.30 Ed. 1 Cocoa and Cocoa Products - Specification for Cocoa Powders (Cocoas) and Dry 8 Pages Mixtures of Cocoa and Sugars Gr 1 This applies to cocoa powders (cocoas) and dry mixtures of cocoa and sugars intended for direct consumption. __________________________________________________________________________________________ GS 740 : 2007 67.140.30 Ed. 1 Cocoa and Cocoa Products - Specification for Cocoa Mass (Cocoa/Chocolate Liquor) and 4 Pages Cocoa Cake. Gr 1 Applies to cocoa (cacao) mass or cocoa / chocolate liquor, and cocoa cake, as a product obtained from cocoa nib, which is obtained from cocoa beans of merchantable quality which have been cleaned and freed from shells as thoroughly as is technically possible with /without roasting, and with / without removal or addition of any of its constituents. __________________________________________________________________________________________ GS 741 : 2007 Ed. 1 Cocoa and Cocoa Products - Specification for Chocolate 67.190 9 Pages Gr 1 Applies to various types of the homogeneous product prepared from cocoa nib, cocoa mass, cocoa press cake and / or cocoa powder with additions such as sugars, cocoa butter, milk products and optional ingredients. __________________________________________________________________________________________ 43 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 742 : 2003 Ed. 1 Specification for Quick Frozen Lobsters 67.120.30 7 Pages Gr 1 Applies to quick frozen raw or cooked lobsters, rock lobsters, spiny lobsters and slipper lobsters. __________________________________________________________________________________________ GS 743 : 2003 Ed. 1 Specification for Quick Frozen Finfish, Uneviscerated and Eviscerated 67.120.30 7 Pages Gr 1 Applies to frozen finfish uneviscerated and eviscerated. __________________________________________________________________________________________ GS 744 : 2003 Ed. 1 Specification for Quick Frozen Shrimps or Prawns - Frozen 67.120.30 8 Pages Gr 1 This standard applies to quick frozen raw or partially or cooked shrimps or prawns, peeled or unpeeled. __________________________________________________________________________________________ GS 745 : 2003 Ed. 1 Specification for Dried Shark Fins 67.120.30 5 Pages Gr 1 Applies to dried shark fins intended for further processing. __________________________________________________________________________________________ GS 746 : 2003 67.120.30 Ed. 1 Specification for Quick Frozen Blocks of Fish Fillet, Minced Fish Flesh and Mixture of 10 Pages Fillets and Minced Fish Flesh Gr 1 This standard applies to quick frozen blocks of cohering fish flesh, prepared from fillets or minced fish flesh or a mixture of fillets and minced fish flesh, which are intended for further processing. __________________________________________________________________________________________ GS 747 : 2003 Ed. 1 Specification for Canned Sardine - Type Products 67.120.30 7 Pages Gr 1 Applies to canned sardines and sardine - type products packed in water or oil or other suitable packing medium. It does not apply to speciality products where fish content constitute less than 50% m/m of the content can. __________________________________________________________________________________________ GS 748 : 2003 Ed. 1 Specification for Canned Crab Meat 67.120.30 5 Pages Gr 1 This standard applies to canned crab meat. It does not apply to speciality products where crab meat constitutes less than 50% m/m of the contents. __________________________________________________________________________________________ 44 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 749 : 2003 Ed. 1 Specification for Canned Finfish 67.120.30 6 Pages Gr 1 Applies to canned finfish packed in water, oil or other suitable packing medium. It does not apply to speciality products where the canned finfish constitute less than 50% m/m of the net contents of the can or to canned finfish covered by other codex product standards. __________________________________________________________________________________________ GS 750 : 2003 Ed. 1 Specification for Canned Salmon 67.120.30 5 Pages Gr 1 This standard applies to canned salmon. __________________________________________________________________________________________ GS 751 : 2003 67.120.30 Ed. 1 Specification for Quick Frozen Fish Sticks (Fish Fingers), Fish Portions and Fish Fillets 10 Pages Breaded or in Batter Gr 1 Applies to quick frozen fish sticks (fish fingers) and portions cut from quick frozen fish flesh blocks, or formed from fish flesh, and to natural fish fillets, breaded or batter coatings, singly or in combination, raw or partially cooked and offered for direct human consumption without further industrial processing. __________________________________________________________________________________________ GS 752 : 2003 Ed. 1 Specification for Quick Frozen Raw Squid 67.120.30 6 Pages Gr 1 Applies to quick frozen raw squid and parts of raw squid, for direct consumption without further processing. It does not apply to products indicated as intended for further processing or for other industrial purposes. __________________________________________________________________________________________ GS 753 : 2003 Ed. 1 Specification for Quick Frozen Fish Fillets 67.120.30 8 Pages Gr 1 Applies to quick frozen fillets of fish offered for direct consumption without further processing. __________________________________________________________________________________________ GS 754 : 2003 Ed. 1 Specification for Canned Shrimps or Prawns 67.120.30 6 Pages Gr 1 Specifies canned shrimps or canned prawns, it does not apply to specialty products where shrimp constitutes less than 50% m/m of the contents. __________________________________________________________________________________________ GS 755 : 2003 67.120.30 Ed. 1 Specification for Salted Fish and Dried Salted Fish of the Gadidae Family of Fishes 10 Pages Gr 1 Applies to salted fish and dried salted fish of the Gadidae family which has been fully saturated with salt (Heavy salted) or to salted fish which has been preserved by partial saturated to a salted content not less than 12% by weight of the salted fish which may be offered for consumption without further industrial processing. __________________________________________________________________________________________ 45 040 5 Pages Gr 1 This standard applies to cassava flour intended for direct human consumption which is obtained from the processing of edible cassava __________________________________________________________________________________________ GS 765 : 2003 Ed.) which have been suitably treated or processed and which are offered for direct consumption. __________________________________________________________________________________________ GS 762 : 2008 Ed. all for direct human consumption . I.Specification for Portland Limestone Cement 91.080 6 Pages Gr 1 This standard applies to dried fruits of Armeniaca Vulgaria Lam. which have been suitably treated or processed and which are offered for direct consumption as raisins or sultanas. 1 Cosmetics . presented in packaged form or sold loose from the package directly to the consumer.080 4 Pages Gr 1 This standard applies to grated desiccated coconut as a finished product obtained from coconut Cocos nucifera L.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 756 : 2003 Ed. 3 Construction Materials .060 10 Pages Gr 1 This standard applies to husked rice.Specification for Colognes and Perfumes Gr 1 Specifies requirements and methods of test for colognes and perfumes. __________________________________________________________________________________________ GS 777 : 2004 Ed. It also covers raisins packed in bulk containers which are intended for repacking into consumer size containers.) __________________________________________________________________________________________ GS 757 : 2003 Ed. the manufacture and for the strength.Specification for Edible Cassava Flour 67. __________________________________________________________________________________________ GS 758 : 2003 Ed. and parboiled rice. 1 Specification for Rice 67. This standard does not include a similar dried vine fruit known as dried currants. __________________________________________________________________________________________ GS 766 : 2011 Ed.100.10 16 Pages Gr 2 Specifies requirements for the composition. 1 Specification for Grated Desiccated Coconut 67. 2 Food Technology .080 5 Pages Gr 1 Applies to dried grapes of varieties conforming to the characterisjtics of Vitis vinifera L. 1 Specification for Dried Apricots 67.e. physical and chemical properties of Portland limestone Cement as characteristic values. __________________________________________________________________________________________ 71. 1 Specification for Raisins 67.100..70 5 Pages 46 . ready for its intended use as human food. (Prunus armeniaca L. milled rice. its treatment. 1 Building and Construction materials .040 Ed.080.040 Ed. and one steel grade intended for welding __________________________________________________________________________________________ GS 788-2 : 2008 77. 3 Pages Varnishes and Allied Products Gr 1 Specifies a method for determining the hard dry time of paint.080. It also covers nine steel gradesnot intended for welding. and eleven steel grades intended for welding __________________________________________________________________________________________ 47 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 87. __________________________________________________________________________________________ GS 788-1 : 2008 77.40 Ed.140.15.Determination of Skin and Coarse Particles in Enamel and 1 Page Synthetic Paints Gr 1 Specifies a method for determining the resistance of paints to skin formation __________________________________________________________________________________________ GS 782 : 2005 87.140.20 Ed. storage. 1 Paints and Varnishes . 1 Paints and Varnishes . so as to guarantee a safe health and wholesome product.040 Ed. packaging. Varnishes and Allied Products -Determination of Hard Drying Time of Paints.Determination of the Consistency of Paints and Varnishes by 3 Pages Means of Krebs Stormer Viscometer (Without Stroboscope) Gr 1 Describes the procedure for determining consistency of paints and varnishes by means of a Krebs-stomer viscometer (without strobscope).15. 1 Paints. 1 Building and Construction materials . distribution and sale for direct consumption. 91.Steel for the Reinforcement of Concrete 16 Pages Part 1 : Plain Bars Gr 2 This standard specifies technical requirements for plain bars to be used as reinforcement in concrete.Determination of the Resistance of Paints to Skin Formation 1 Pages Gr 1 Specifies a method for determining the resistance of paints and varnishes to skin formation __________________________________________________________________________________________ GS 785 : 2005 87. Processing and Marketing of Potable Water 10 Pages Gr 1 This code recommends appropriate general techniques for the collection of potable water. varnish or other allied products which dries by the action of air or by chemical reaction of its components __________________________________________________________________________________________ GS 786 : 2005 13. 040 GS 781 : 2005 Ed. It also covers ten steel grades not intended for welding. transport. 1 Paints and Varnishes .40 Ed. bottling. 91.060. 1 Code of Hygienic Practices for the Collection.Steel for the Reinforcement of Concrete Part 1 : Ribbed Bars 22 Pages Gr 3 This standard specifies technical requirements for plain bars to be used as reinforcement in concrete. __________________________________________________________________________________________ GS 784 : 2005 87. Varnishes and Allied Products .040 Ed. metal. etc substrates and as finish lacquer enamel on wood. gypsum board. __________________________________________________________________________________________ GS 796 : 2005 87.040 Ed.ect.40 Ed.040 1 Pages Gr 1 Specifies the method of determining the transparency of paints varnishes and allied products __________________________________________________________________________________________ 48 .Steel for the Reinforcement of Concreteu Part 3 : Welded fabric 12 Pages Gr 2 This standard specifies technical requirements for factory made sheets or rolls of welded fabric. 1 Specification for Putty for Emulsion 5 Pages Gr 1 Specifies the requirements.140. __________________________________________________________________________________________ GS 798 : 2005 Ed. compliance criteria and methods of test for sanding sealer __________________________________________________________________________________________ GS 795 : 2005 Ed. test methods and acceptance criteria for lacquer thinners used in diluting nitrocellulose lacquers and retarders which are mixed with lacquer thinners to prevent the coating from blushing.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 788-3 : 2008 77. 1 Paints and Varnishes .040 15 Pages Gr 2 Specifies the requirements.Determination of Transparency 87. 1 Specification for Sanding Sealer 87. methods of sampling and test for clear nitrocellulose lacquer used as a transparent coating on wood. __________________________________________________________________________________________ GS 797 : 2005 Ed. sampling procedure. mortar and concrete.040 8 Pages Gr 1 Specifies the requirements. 91. manufactured from steel wires or bars with diameters from 4mm to 16mm and designed for the reinforcement of concrete structures and the ordinary reinforcement of prestressed concrete structures. __________________________________________________________________________________________ GS 793 : 2005 87. 1 Paints. 1 Specification for Lacquer Thinner 87. sampling procedure methods of test and compliance criteria for puffy used for sealing substrate of wood. 1 Building and Construction materials .080. 1 Specification for Nitrocellulose Lacquer 87.040 5 Pages Gr 1 Specifies the requirements. plywood. sampling procedure. asbestos cement sheet. substrates.Determination of Resistance of Paint Films to Washing 4 Pages Gr 1 Specifies a method for determining the resistance of paint films to washing.metal. __________________________________________________________________________________________ GS 794 : 2005 Ed.15. 2 This standard specifies requirements for the composition. viscose.Methods for the Determination of Certain Aromatic Amines Derived from 12 Pages AZO Colorants Part 1: Detection of the use of Certain Azo Colorants Accessible without Extraction Gr 2 Describes the procedure to detect the use of certain azo colorants that may not be used in the manufacture or treatment of certain commodities made of textile fibres and that are accessible to reducing agent without extraction.Specification for Portland Pozzolana Cement 15 Pages Calcined Clay Based Gr. physical and chemical properties of portland pozzolana cement as characteristic values.Periodic Inspection and Test 60 Pages Gr 6 This standard provides the minimum requirements and methods of test for periodic inspection or motor vehicles and trailers. Pulses and Derived Products .Specification for Fortificant Premix Wheat Flour 4 Pages Gr 1 This standard specifies the requirements for vitamins and minerals in fortificant premix. which is intended for fortification of wheat flour. the manufacture and for the strength. 1 Petroleum Products .080.080.060 Ed.040 Ed. The requirements for marking.200. particularly textiles made of cellulose and protein fibre (e.01 Ed. 1 Motor Vehicles . wool. 75. silk) __________________________________________________________________________________________ GS 806 : 2006 43.10 Ed. cotton.15 Ed.Determination of Brush and Roller Application Properties 8 Pages Gr 1 Specifies a method of assessing the brush and roller application properties and the flow characteristics of paints when the paints are applied over relatively large areas. __________________________________________________________________________________________ GS 807-1: 2008 75.100 Ed. __________________________________________________________________________________________ GS 804-1 : 2005 59.Lubricating Oils. which is intended for fortification of vegetable oil __________________________________________________________________________________________ 49 . 1 Building and Construction Materials . sampling and testing for acceptance and the procedures for the manufacturer's auto-control system to ensure conformity with this standard are also included.100. 1 Textiles .Specification for Monograde Oil for Petrol 9 Pages Engines for Ghana Automotive Lubricants Class CE (API Category CE) Gr 1 The standard specifies the requirements.020 Ed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 800 : 2005 87. 1 Animal and Vegetable Fats and Oils . sampling procedures and test methods for monograde oil suitable for petrol engines that operate under Ghana automotive class CE(API Category CE) __________________________________________________________________________________________ GS 809 : 2006 67.Specification for Fortificant Premix for Vegetable 4 Pages Oil Gr 1 This standard specifies the requirements for vitamins and in fortificant premix.g. __________________________________________________________________________________________ GS 803 : 2009 91. 1 Cereals. 1 Paints and Varnishes . __________________________________________________________________________________________ GS 810 : 2006 67. sampling procedures and test methods for monograde oil suitable for petrol engines that operate under Ghana automotive class SE (API Category SE) __________________________________________________________________________________________ GS 819 : 2008 Ed.10 Ed.Specification for Fortified Named Vegetable Oils 20 Pages Gr 2 This standard applies to the vegetable oils described in section 2.100 Ed. __________________________________________________________________________________________ GS 815-1 : 2008 75.Lubricating Oils.100 Ed.060 Ed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 811 : 2006 67. 75. 75.080.1 presented in a state for human consumption and fortified as in clause 3.060 Ed. Pulses and Derived Products .080.4.080. 1 Animal and Vegetable Fats and Oils .Specification for Fortified Strong Wheat Flour 5 Pages Gr 1 This standard specifies the requirements for fortified strong wheat flour __________________________________________________________________________________________ GS 812 : 2006 67. 1 Cereals.Specification for Monograde Oil for Petrol 9 Pages Engines for Ghana Automotive Lubricants Class SE(API Category SE) Gr 1 The standard specifies the requirements.Lubricating Oils .Quantitative Evaluation of the Bleeding of Colourants 83.200.100 Ed. 1 Cereals. 1 Plastics .01 3 Pages Gr 1 The standard specifies a method for the qualitative evaluation of the tendency of some colouring materials to "bleed off" or to migrate from the plastic material into other materials if they are in close contact with each other __________________________________________________________________________________________ 50 . 1 Petroleum Products . Pulses and Derived Products .Lubricating Oils .Specification for Monograde Oil for Petrol 9 Pages Engines for Ghana Automotive Lubricatant Class SD (API Category SD) Gr 1 This standard specifies the requirements and methods of sampling and test for monograde oil suitable for petrol engines aspirated trucks that operate under ghana automotive lubricant class SD (API Category SD) __________________________________________________________________________________________ GS 815-2 : 2008 75.Specification for Multigrade Oil for Petrol Engines for Ghana Automotive Lubricatant Class SD (API Category SD) 10 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for monograde oil suitable for petrol engines aspirated trucks that operate under ghana automotive lubricant class SD (API Category SD) __________________________________________________________________________________________ GS 816-1 : 2008 75. 1 Petroleum Products . 75.Specification for Fortified Soft Wheat Flour 4 Pages Gr 1 This standard specifies the requirements for fortified soft wheat flour __________________________________________________________________________________________ GS 813 : 2006 67.080. 1 Petroleum Products . sampling procedures and test methods for monograde oil suitable for diesel engines that operate under Ghana automotive lubricant class CF (API Category CF) __________________________________________________________________________________________ GS 831 : 2008 83.Specification for Sewing Threads 17 Pages Gr 2 This standard specifies the requirements.080.Specification for Monograde Oil for Diesel 9 Pages Engines for Ghana Automotive Lubricant Class CF (API Category CF) Gr 1 The standard specifies the requirements. 75.10 Ed. 1 Nuts .Lubricating Oils .0100 Ed.Specification for Lubricating Grease 17 Pages Gr 2 This standard specifies the performance requirements.100 Ed.Specification for Monograde Oil for Petrol Engines for Ghana Automotive Lubricants Class SF(API Category SF) 9 Pages Gr 1 The standard specifies the requirements. 75.Specifications Gr 5 This standard specifies requirements and methods of sampling and test for modified unplasticized polyvinyl chloride (PVC-M) pipes (with integral joints that incorporate rubber sealing rings) and fittings (post. sampling procedures and test methods for monograde oil suitable for petrol engines that operate under Ghana automotive class SF (API Category SF) __________________________________________________________________________________________ GS 821 : 2008 59.100 Ed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 820-1 : 2008 75.Lubricating Oils.080. clothing and footwear __________________________________________________________________________________________ GS 824 : 2007 67. sampling procedures and test methods for different classes of lubricating grease. 1 Petroleum Products . 1 Petroleum Products . polymide.formed from pipe made of (PVC-M) that are intended for above-ground and below-ground pressure applications for the conveyance of potable water in reticulation systems and for other applications in which continuous temperatures in excess of 30 C are not encountered __________________________________________________________________________________________ 51 . methods of sampling and test for cotton. and all of which can contain suspended solid lubricants.080.Pipes and Fittings made of Modified Unplasticized Polyvinyl Chloride (PVC-M) 48 Pages for Water Supply . Gaertner) in the form of whole nuts or kernels which is processed into fat / oil and other products __________________________________________________________________________________________ GS 826-1 : 2008 75.75. and automotive and multi-purpose extreme pressure.080. sampling procedures and test methods for monograde oil suitable for petrol engines that operate under Ghana automotive class CD(API Category CD) __________________________________________________________________________________________ GS 828 : 2008 75.080.080. 1 Petroleum Products . __________________________________________________________________________________________ GS 830-1 : 2008 75. each in four consistency grades.Specification for Shea Nuts 7 Pages Gr 1 This standard specifies the requirements for fruits of the tree Vitellaria paradoxa (C. 1 Plastics . 75. 1 Petroleum Products .080. automotive non-extreme pressure. 1 Textiles .Specification for Monograde Oil for Petrol Engines for Ghana Automotive Lubricants Class CD(API Category CD) 9 Pages Gr 1 The standard specifies the requirements.Lubricating Oils.F.99 Ed. namely industrial non-extreme pressure. industrial high performance extreme pressure.01 Ed. polyester and core spun sewing threads suitable for use in the manufacture of textile articles.100 Ed. 20 4 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for paper napkins/serviettes in sheet form __________________________________________________________________________________________ GS 838 : 2008 Ed. methods of sampling and tests for aperitif __________________________________________________________________________________________ GS 856 : 2007 Ed. 1 Petroleum Products . 1 Services Advertising .10 6 Pages Gr 1 This standard specifies the requirements for toffees __________________________________________________________________________________________ 52 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 837 : 2007 Ed. 1 Alcoholic Beverages . 1 Paper and Paper Products .180.Specification for Toffees 67. 1 Sugar and Sugar Products . methods of sampling and tests for wines __________________________________________________________________________________________ GS 855 : 2007 Ed.cellular rubber polyurethane.100 6 Pages Gr 1 The standard specifies the requirements and the methods of sampling and test for base oils suitable for use in the blending of lubricating oils __________________________________________________________________________________________ GS 844 : 2006 61. 75.10 5 Pages Gr 1 This standard specifies the requirements.10 2 Pages Gr 1 This standard specifies the requirements.Measurement of the heat shrinkage of cellular solings 3 Pages Gr 1 This standard specifies a method for determining the linear shrinkage after heating of test pieces prepared from cellular soling materials.160.Specification for Wines 67.Specification for Base Oils 75.Specification for Paper Napkin Serviettes 85.060 Ed.160.expanded rubber.080.g.080.Specification for Aperitif 67. 1 Alcoholic Beverages . 1 Footwear and footwear materials . micro.20 75 Pages Gr 10 This standard specifies the requirements and procedures for mounting and maintaining outdoor advertising sign structures (hereafter referred to as 'signs') which are visible from all public roads and streets __________________________________________________________________________________________ GS 854 : 2007 Ed.Specification for Outdoor signs 03. semi. cellular ethylene vinyl acetate (EVA) and other cellular plastic materials __________________________________________________________________________________________ GS 847 : 2010 Ed. e.080. 040 7 Pages Gr 1 This standard specifies the requirements. 1 Jewellery .080. 1 Food Technology .20 5 Pages Gr 1 This standard specifies the requirements. 1 Specification for Roasted Maize Flour (Tom Brown) 67. 1 Vegetables and Derived Products .Specification for Potato Flakes 67. cocoyam and yam fufu flours produced from fresh.Finess and 3 Pages Marking Gr 1 This standard specifies eight grades of gold used in the manufacture of jewellery / artefacts of gold based on their gold content __________________________________________________________________________________________ GS 890 : 2007 39. methods of sampling and test for potato flakes produced from sound matured potatoes and is intended to be used directly as food or as an ingredient in domestic and industrial food products __________________________________________________________________________________________ GS 868 : 2008 Ed.Specification for Fufu Flours 67.060 Ed.10 Ed. __________________________________________________________________________________________ GS 889 : 2007 39. mature and sound edible cassava.060 5 pages Gr 1 Thisstandard applies to soy flour obtained from the processing of soybeans and is intended for human consumption __________________________________________________________________________________________ GS 883 : 2008 Ed. methods of sampling and test for cassava.Specification for Silver and Silver Alloys Jewellery /Artefacts .060 Ed.220. plaintain.Specification for Gold and Gold Alloys. 1 Jewellery . 1 Specification for Suya (Khebab) Powder 4 pages Gr 1 This standards specifies the requirements for suya (khebab) powder as flavouring the grilled meat and poultry and is intended for human consumption __________________________________________________________________________________________ GS 879 : 2009 Ed. dried and sound maize grains and is intended for human consumption. It also specifies the guidelines for marking of purity and other details on tested silver jewellery / artefacts __________________________________________________________________________________________ 53 . 1 Specification for Soy Flour 67.060 4 Pages Gr 1 This standard specifies the requirements for roasted maize flour produced from matured. Jewellery / Artefacts .Fineness and Marking 3 Pages Gr 1 This standard specifies three grades of fine silver and five grades of silver alloys used in the manufacture of jewellery / artefacts of silver based on their silver content.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 858 : 2007 Ed. plantain cocoyam and yam respectively __________________________________________________________________________________________ GS 876 : 2009 67. 18.General Requirements for the Supply of Metallurgical Materials 39. __________________________________________________________________________________________ GS 901 : 2008 Ed.060 5 Pages Gr 1 This standard specifies the general requirements for the supply of metallurgical materials including raw materials for metallurgical industries and finished metal products conforming to Ghana Standard Specifications.Determination of Gold in Gold Jewellery Alloys .22. 1 Jewellery . 1 Jewellery . The gold content of the alloys should preferably lie between 333 and 999 parts per thousand (0/00) __________________________________________________________________________________________ GS 900 : 2007 Ed. It also applies to all articles made from pewter. bar .sheet. 21.Specification for Fine Grade Palladium 39. and 9 carat gold in the form of ingot. rod. 14. plate. and for the purpose of this code. It also applies to articles including optical frames.wire and granules.060 1 Page Gr 1 This standard covers guideline for manufacture of 23. 22. 22. 1 Jewellery .060 4 Pages Gr 1 This standard specifies the minimum requirements for two grades of primary nickel commonly used for nickel anodes and in the ferrous and non.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 39.Cupellation Method (Fire 6 Pages Assay) Gr 1 This standard specifies a cupellation method (fire assay) for the determination of gold in gold jewellery alloys.Specification for Gold Solders for use in Manufacture of Jewellery 2 Pages Gr 1 This standard specifies the requirements for gold solders for use in the manufacture of gold jewellery / artefacts of 23.Specification for Primary Nickel 39.21.Guidelines for manufacture of 23. pens and pencils. 1 Jewellery .14 and 9 carat gold alloys 5 Pages Gr 1 This standard covers guidelines for manufacture of 23.060 16 Pages Gr 2 This standard code applies to jewellery industry products which include.060 Ed. sheet.18.plate. __________________________________________________________________________________________ GS 902 : 2007 Ed.14 and 9 carat gold in the form of ingot. 1 Jewellery . 21. bar. 33. all articles covered by this code are defined as industry products. but are not limited to the following: gemstones and their laboratory-created and imitation substitutes.060 GS 891 : 2007 Ed. 1 Jewellery . 1 Jewellery .Code for the Gems and Jewellery Industries 39. rot.18. flatware fabricated from precious metals.ferrous industry __________________________________________________________________________________________ 54 . wire and granules __________________________________________________________________________________________ GS 903 : 2007 Ed. 21.060 Ed. __________________________________________________________________________________________ GS 893 : 2007 39. 14. 18. and 9 carat __________________________________________________________________________________________ GS 892 : 2007 39. nonwoven or knitted) suitable for covering mattresses. 1 Vegetables and Derived Products .080. 1 Jewellery .Specification for Plantain Chips 67.20 5 Pages Gr 1 This standard specifies the requirements.100.080. __________________________________________________________________________________________ GS 907 : 2008 59.Specification for Portland Limestone Cement.Specification for Zinc Ingot 39. sampling and testing for acceptance and the procedures for the manufacturer's auto control system to ensure conformity with this standard are also included __________________________________________________________________________________________ GS 915 : 2007 Ed.Terminology 8 Pages Gr 1 This standard defines terms used in the tourism industry in relation to the various types of tourism accommodation and other related services. either treated or untreated __________________________________________________________________________________________ GS 914 : 2011 91.10 Ed.Specification for Treated and Untreated Mosquito Nets for Bedding 15 Pages Gr. The requirements for marking. methods of sampling and test for plantain chips produced from deep fat frying or baking of matured unripe plantain or at appropriate degree of ripeness. 2 This Ghana standard prescribes the requirements.03.99 Ed. 1 Tourism Services .Specification for fresh Okra 4 Pages Gr 1 This standard specifies the requirements for varieties of fresh okra entering the domestic and international trade in the fresh. and for use in the public sector and contract markets.040.Hotels and other types of Tourism Accommodation . __________________________________________________________________________________________ GS 906 : 2006 01. 2 Construction Materials . 1 Fresh Fruits and Vegetables . physical and chemical properties of portland limestone cement as characteristic values.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 904 : 2007 Ed.080.CEM II/B-L (LL) 18 Pages Gr 2 This standard specifies requirements for the composition. 1 Textiles . divans and bed bases which are intended for residential ( domestic) use. the manufacture and for the strength. natural state. Certain fabrics may also be suitable for use as pillow tickings.30 Ed.01 Ed.Specification for tickings 7 Pages Gr 1 This standard specifies properties.03. test methods( other than flammability) and minimum requirements for tickings ( woven. intended for direct human consumption __________________________________________________________________________________________ 55 . __________________________________________________________________________________________ GS 909 : 2009 61. methods of sampling and test for mosquito nets.020 Ed.060 3 Pages Gr 1 This standard specifies the requirements for virgin zinc in the form of ingot __________________________________________________________________________________________ GS 905 : 2007 67.080. 1 Textiles . 200 Ed. Garlic for industrial processing are excluded __________________________________________________________________________________________ GS 927 : 2007 59. zinc.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 916 : 2007 39. including certification bodies to assess the organization's ability to meet customers.080. 1 Tourism Services .01 5 Pages Gr 1 This standard specifies the requirements for varieties of fresh tomato entering the domestic and international trade in the fresh.Determination of Silver in Silver Jewellery Alloys . semi. cadmium and palladium.01 5 Pages Gr 1 This standard specifies the requirements for varieties (cultivars) of fresh garlic grown from Allium sativum L.200 Ed. including certification bodies to assess the organization's ability to meet customers. These alloys may contain copper. __________________________________________________________________________________________ GS 921 : 2007 Ed.dry or dry state. regulatory and the organization's own requirements.Volumetric (Potentiometric) Method using Sodium Chloride or Potassium Chloride 3 Pages Gr 1 This standard specifies a volumetric method for the determination of silver in silver jewellery alloys. preferably within the range of fineness.Specification for Fresh Tomato 67. __________________________________________________________________________________________ GS 926 : 2008 Ed.060 6 Pages Gr 1 This standard specifies the requirements.Specification for Garlic 67.99 Ed. regulatory and the organization's own requirements.Hotels and related Establishments Grading Requirements 18 Pages Part 2 : Limited Service Hotels Gr 2 This standard can be used by internal and external parties. 1 Cereals.080. natural state.060 Ed. 1 Textiles . __________________________________________________________________________________________ GS 919-1 : 2008 03. 1 Fresh Fruits and Vegetables . __________________________________________________________________________________________ GS 919-2 : 2008 03. entering the domestic and international trade in the fresh. 1 Tourism Services .Specification for Instant Noodles 67. 1 Fresh Fruits and Vegetables . It also applies to various kinds of instant noodles __________________________________________________________________________________________ GS 922 : 2007 Ed. methods of sampling and test for instant noodle made essentially from flour and / or other flours and / or starches.Hotels and related Establishments Grading Requirements 21 Pages Part 1 : Full Service Hotels Gr 3 This standard can be used by internal and external parties. Pulses and Derived Products .080.Determination of Unsaponifiables in Jute Bags / Cloth used for Packaging 10 Pages Selected Food Materials Gr 1 This standard specifies the method of sampling and test for unsaponifiables for food grade jute packaging materials (bags/cloth) containing less than 1250mg/kg unsaponifiable matter based on the mineral hydrocarbon fraction __________________________________________________________________________________________ 56 . 1 Jewellery . Code of Practice for Handling and Processing of fish 147 Pages Gr 15 This code of practice contains technological guidelines and the most essential requirements of hygiene for handling of fish on board fishing vessels. Watermelon for industrial processing are excluded.080 6 Pages Gr 1 This standard specifies the requirement for headed cabbages of varieties ( including red cabbages and pointed cabbages) entering the domestic and international trade in the fresh.Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food and Non-Food Processing 18 Pages Gr 2 This standard outlines the installation qualification program for an irradiator and the dosimetric procedures to be followed during operational and performance qualification and routine processing in facilities that process food and non food products with gamma rays.080 5 Pages Gr 1 This standard specifies the requirement for varieties of carrots entering the domestic and international trade in the fresh.160 Ed. 1 Fresh Fruits and Vegetables . __________________________________________________________________________________________ GS 929 : 2008 67. 1 Fresh Fruits and Vegetables . 1 Dosimetry . __________________________________________________________________________________________ GS 937 : 2008 Ed.160. canned fish. __________________________________________________________________________________________ GS 933 : 2008 Ed.120. sugar cane. 1 Specification for the Ghana National Flag 20 Pages Gr 2 This standard covers the requirements for materials.10 4 Pages Gr 1 This standard specifies the requirements and methods of sampling and test for local gin produced from palm wine. Ed. natural state. Carrots for industrial processing are excluded. natural state.Specification for Local Gin (Akpeteshie) 67. 1 Fish and Fishery Products .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 928 : 2008 67. __________________________________________________________________________________________ 57 . 1 Fresh Fruits and Vegetables . design . fruits and cereals __________________________________________________________________________________________ GS 932 : 2008 03.30 Ed. Cabbages for industrial processing are excluded.080 4 Pages Gr 1 This standard specifies the requirement for varieties of Watermelon entering the domestic and international trade in the fresh.Specification for Watermelon 67. sampling. __________________________________________________________________________________________ GS 936 : 2008 Ed. test and make of three types of the National Flag of the republic of Ghana. processing of fresh and frozen fish.Specification for Headed Cabbages 67. natural state. It is to ensure that the product has been treated with a predetermined range of absorbed dose.Specification for Carrots 67. dried and smoked fish __________________________________________________________________________________________ GS 931 : 2008 Ed. 1 Alcoholic Beverages . Code of practice for the Distillation and marketing of Local Gin 5 Pages (Akpeteshie) Gr 1 This code recommends good manufacturing guidelines for distilling.080 Ed. healthy and wholesome product __________________________________________________________________________________________ GS 944 : 2008 Ed.Denatured Fuel Ethanol 75.Specification for Garden Eggs 4 Pages Gr. so as to guarantee a safe. 1 Alcoholic Beverages . 1 Automotive Fuels .Requirements for the Establishment and Operations 18 Pages of Petroleum Product Retail Outlets in Ghana Gr 2 This standard specifies the requirements for issuance of license to operate a service / filling station and a reseller outlet __________________________________________________________________________________________ GS 943 : 2008 71.080.Specification for Aubergines 67. natural state __________________________________________________________________________________________ GS 942 : 2010 75. 1 Fresh Fruits and Vegetables . nominally 75 to 85% volume denatured fuel ethanol and 25 to 15 additional % volume hydrocarbons for use in ground vehicles with automotive spark-ignition engines __________________________________________________________________________________________ GS 946 : 2008 Ed. 1 Fresh Fruits and Vegetables .Specification for Biodiesel Fuel (B100) 75. distribution and sale of local gin (Akpeteshie) for direct consumption. __________________________________________________________________________________________ GS 939 : 2009 67. natural state.01 Ed. 1 Petroleum and Petroleum Products . 1 Automotive Fuels . bottling.01 43 Pages Gr 5 This standard covers the requirements and test methods for norminally anhydrous denatured fuel ethanol intended to be blended with unleaded gasoline at 1 to 10 % volume denatured fuel ethanol for use as a spark ignition automotive engine fuel.01 13 Pages Gr 2 This standard covers the requirements and test methods for ethanol fuel blend.Specification for Bioalcohol ( Ed 75-Ed 85) 75. packaging.160.1 This standard specifies the requirements for varieties of garden eggs entering the domestic and international trade in the fresh.60 Ed. 1 Automotive Fuels .Specification for Bioalcohol .080 5 Pages Gr 1 This standard specifies the requuirement for varieties of aubergines entering the domestic and international trade in the fresh. Aubergines for industrial processing are excluded. __________________________________________________________________________________________ 58 . storage.080.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 938 : 2008 Ed.01 15 Pages Gr 2 This standard specifies requirements and test methods for marketed and delivered biodiesel to be used either as automotive fuel for diesel engines at 1005 concentration or biodiesel (B100) Grades S15 and S500 for use as a blend component with middle distillate fuels. __________________________________________________________________________________________ GS 945 : 2008 Ed.160.160. 1 Terminologies for the processing of shea kernel and shea butter 67.200. __________________________________________________________________________________________ GS 955 : 2009 07. 1 Microbiological Analysis of Foods .10 9 Pages Gr 1 This standard describes recommended practices during harvest. __________________________________________________________________________________________ GS 949-1 : 2011 65.30 Ed.30 Ed. 1 Specifications for Hausa Koko Flour 67. 2 The standard outlines the control points and criteria for compliance to the code of practice for crop production __________________________________________________________________________________________ GS 953 : 2008 Ed.100.060. It is intended for human consumption. 2 The standard sets out the framework for good agricultural practices fro Ghana. It defines essential elements for the development of best practice for the production of agricultural crops and ornamentals __________________________________________________________________________________________ GS 949-2 : 2011 65. 67.Sampling Plans and Microbiological criteria 16 pages Gr 2 This standards outlines the microbiological sampling plans. __________________________________________________________________________________________ 59 . methods of sampling and test for hausa koko flour produced from dried.10 4 Pages Gr 1 This standard provides a list of terms and definitions applicable to the techniques of processing shea kernel and shea butter for commerce. matured and sound millet or a mixture of millet with maize grains. drying and stroarge of shea kernel and primary processing into shea butter. 1 Good Agricultural Practices for Ghana (GHANAGAP) 15 Pages Part 1: Code of Practice for Crop Production Gr.30. __________________________________________________________________________________________ GS 957 : 2009 Ed. 1 Good Agricultural Practices for Ghana (GHANAGAP) Part 2: Compliance Criteria for the Code of Practice for Crop Production 19 Pages Gr. 1 Code of Practice for the Processing of Shea Kernel and Shea Butter 67. criteria and methods of test for microbiological examination of foods __________________________________________________________________________________________ GS 956 : 2008 Ed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 948 : 2008 Ed. ) and is intended for human consumptiojn.080.060 4 Pages Gr1 The standard specifies the requirements.050 Ed. 1 Specification for Roasted Cashew Kernels 67.060.10 6 pages Gr1 This standard specifies the requirements for roasted cashew kernels(from nuts of the cashew tree anacardium occidentale L.200. 1 This standard specifies the requirements for mango planting materials for the cultivation of mango. 1 Planting Materials .Hotels and Related Establishment .1 This standard specifies the requirements for citrus planting materials for the cultivation of citrus.Criteria for the Grading of 6 Pages Restaurants and other places of Entertainment .Specification for Pineapple Planting Materials 67.060. It also specifies grading and methods of sampling of citrus planting materials __________________________________________________________________________________________ GS 969-1 : 2009 65. 1 Planting Materials .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 964 : 2009 91.15 Ed. for use as an admixture and for the manufacture of portland pozzolana cement conforming to GS 803: 2009 __________________________________________________________________________________________ GS 965-1 : 2009 03. 1 Tourism Services . It also specifies grading and methods of sampling of mango planting materials __________________________________________________________________________________________ GS 968 : 2009 67. 1 Tourism Services .30 Ed.30 Ed.Part 1: Code of Practice for Planting Material Production 13 Pages Gr 2 This standard set out the framework for good nursery practices for Ghana. 65.080. 1 Building and Construction Materials .Specification for Mango Planting Materials 67.060. 65.Criteria for the Grading of 6 Pages Restaurants and other places of Entertainment . 1 This standard covers the requirements for calcined clay pozzolana for part replacement of cement.080.080. for use with lime.Specification for Citrus Planting Materials 4 Pages Gr.Part 1: Criteria for Grading the Informal Catering and Drinking Establishment Gr1 This standard specifies the requirements and grading criteria for the establishment of any informally premises for the preparation and serving of food and beverage for direct human consumption.060. 1 This standard specifies the requirements for pineapple planting materials for the cultivation of pineapple. It defines essential elements for the development of best practice for planting material production.060. 1 Good Nursery Practices . and the minimum standards for planting material production __________________________________________________________________________________________ 60 .Hotels and Related Establishment . 1 Planting Materials .100.30 Ed. __________________________________________________________________________________________ GS 966 : 2009 Ed.Specification for Calcined Clay Pozzolana 4 Pages Gr.30 3 Pages Gr. 65. It also specifies grading and methods of sampling for pineapple planting materials __________________________________________________________________________________________ GS 967 : 2009 Ed.30 Ed.080.Part 1: Criteria for Grading the Formal Catering Establishment Gr 1 This standard specifies the requirements and grading criteria for the establishment of any formally fitted premises for the preparation and serving of food and beverage for direct human consumption.080. __________________________________________________________________________________________ GS 965-2 : 2009 03.30 3 Pages Gr. 020 7 Pages Gr.2 18 Pages 79. Jackets and Skirts 7 Pages Gr. 1 This standards prescribes the requirements. construction. methods of sampling and test for woven fabrics used for Suits.1 This standard code serves as a production and maintenance guide for garment producers. __________________________________________________________________________________________ GS 975 : 2009 Ed.01 4 Pages Gr.220.140 This standard specifies the requirements relating to materials. 1 Textiles .Specifications for Oranges for Processing 67. __________________________________________________________________________________________ 61 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 61. thus fostering best practices throughout the industry __________________________________________________________________________________________ GS 974 : 2009 Ed. finishing and tests for tables. Fresh oranges for direct consumption are excluded.Specification for Sesame Seeds 67. 1 Spices and Condiments . 1 This standard specifies the requirements. Jackets and Skirt made from one textile fibre or blends of textile fibres __________________________________________________________________________________________ GS 972 : 2009 Ed. 1 Textiles . 1 Fresh Fruits and Vegetables .020 Ed. workmanship. Trousers.Code of Practice for Garment Producers 61. 1 ThisGhana Standard specifies the requirements for oranges of varieties grown from the species Cirtrus sinensis Osbeck intended for industrial processing.060 6 pages Gr 1 This standard applies to wheat flour obtained from the processing of whole wheat grains and is intended for human consumption __________________________________________________________________________________________ GS 980:2009 Specification for Tables Gr. Trousers.10 5 Pages Gr 1 This standard specifies the requirements for varieties of sesame seeds intended for direct consumption or for food when intended to be mixed with other products without further processing. 1 Textiles . 1 Specification for Whole Wheat Flour 67.Specification for Woven Fabrics used for Suits .Specification for Fabrics for Shirts and Uniforms 6 Pages Gr. method of sampling and test for woven and knitted fabrics made from one textile fibre or blends of textile fibres for making shirts and uniforms __________________________________________________________________________________________ GS 971 : 2009 61. Sesame seeds for industrial processing are excluded __________________________________________________________________________________________ GS 979 : 2009 Ed.080. sizes.020 GS 970 : 2009 Ed. Moringa products derived from the stem barks. Wigs. 1 Specification for Moringa Leaf Products 8 pages Gr. 1 This standard sets out the framework for good manufacturing practices for the Moringa industry in Ghana.10 4 pages Gr.120. methods of sampling and test for man-made (synthetic) and/or human hair pieces. methods of sampling and test for products of Moringa oleifera Lam.2 14 Pages This standard specifies the requirements relating to materials.01 Ed. 1 This standard specifies the requirements. sizes.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 981:2009 Specification for Seating Gr. 2 This standard specifies the requirements.140 Specification for Bedsteads Gr.080 Specification for planned timber and Mouldings Gr. seeds.10 Ed. construction. hair extensions and braids __________________________________________________________________________________________ GS 998 : 2009 11. 1 Code of Practice for the Production of Moringa Leaf Products 11. construction. workmanship.2 79.080. sizes. roots and flowers are not covered by this standard __________________________________________________________________________________________ GS 999 : 2009 Ed.140 Specification for Furniture Components Gr. wigs. 1 Specification for Man-Made (Synthetic) and /or Human Hair Pieces.140 18 Pages This standard specifies the requirements relating to materials. workmanship. It defines essential elements for the development of best practices for the production and packaging of moringa leaf products __________________________________________________________________________________________ 62 . finishing and tests for seating __________________________________________________________________________________________ GS 982:2009 79.120.2 14Pages This standard for furniture components establishes the general rules for the classification and grading of furniture components __________________________________________________________________________________________ GS 984:2009 79.2 17Pages This standard for planed timber and mouldings establishes the general rules for the classification and grading of machined wood products __________________________________________________________________________________________ GS 989 : 2010 83. finishing and tests for bedsteads __________________________________________________________________________________________ GS 983:2009 79. Hair 19 pages Extensions and Braids Gr. 1 The Petroleum Industry . the methods of construction and the installation of equipment used in liquefied petroleum gas applications for domestic and commercial installations that involve gas storage containers of individual water capacity not exceeding 500 L and of a combined water capacity not exceeding 3 000 L __________________________________________________________________________________________ GS 1006-2 : 2010 75.The Handling.060 3 Pages Gr. Commercial. 1 The standard specifies the requirements for whole dry cowpea grains intended for human consumption .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 1004 : 2011 Ed.Storage and Filling Premises for Refillable Liquefied Petroleum Gas (LPG) Containers and the Storage of Individual Gas Containers not Exceeding 48 KG Gr.Part 2: The Installation of Underground Storage Tanks. 1 Petroleum and Petroleum Products . Distribution and Maintenance of Liquified Petrroleum Gas in Domestic.The Handling. and the installation of equipment of the types normally used for the handling. Pulses and Derived Products .080 Ed.080 Ed. 1 Petroleum and Petroleum Products . Distribution and Maintenance of Liquefied Petroleum Gas in Domestic. 1 Cereals. Pumps/ Dispensers and Pipework.and for domestic and international trade __________________________________________________________________________________________ GS 1005-1 : 2010 75.Specification for Cowpea Grains 67. storage and distribution of petroleum products and their derivatives __________________________________________________________________________________________ GS 1005-2 : 2010 75. 3 This standard specifies the minimum requirements for the locatuion and installation of and operations at filling premises for the filling of liquefied petroleum gas (LPG) containers and the storage of individual gas containers not exceeding 48 kg __________________________________________________________________________________________ 63 . Storage.080 Ed. 4 The standard covers provisions for the installation of underground storage tanks of individual capacity not exceeding 85 000 L . pumps/dispensers and pipework at service stations and consumer installations __________________________________________________________________________________________ GS 1006-1 : 2010 75. and Industrial 27 Pages Installations Part 2: .080 Ed. Storage. and Industrial 67 Pages InstallationsPart 1: Liquefied Petroleum Gas Installations Involving Gas Storage Containers of Individual Water Capacity not Exceeding 500 L and a Combined Water Capacity not Exceeding 3 000 L per Installation Gr 10 This standard specifies the requirements for the materials. 1 Petroleum and Petroleum Products . at Service Stations and 37 Pages Consumer Installations Gr.Part 1: Storage and Distribution of Petroleum Products in 87 Pages Above-Ground Bulk Installations Gr 10 This standard covers the layout and design of petroleum bulk depots. Commercial.Code of Practice . __________________________________________________________________________________________ 64 . Storage. design and installation of butane. and Industrial 48 Pages Installations Part 3: Liquefied Petroleum Gas Installation Involving Storage Vessels of Individual Water Capacity Exceeding 500 L Gr. __________________________________________________________________________________________ GS 1012 : 2011 Ed. 1 Management Systems .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 75. to enable an organisation to control its OH&S risks and improve its OH&S performance. Storage and Distribution of Liquefied Petroleum Gas in Domestic. 1 Petroleum and Petroleum Products . 10 This standard provides the guidelines for technical preparation for Ghana Standards. and Industrial 16 Pages Installations Part 4: Transportation of LPG in Bulk by Road Gr.080. Writing. inspection.99 Ed. the design of vehicles and ancillary equipment. 1 Phytosanitary Measures . Commercial.Code of Practice 75 pages Gr.Occupational Health and Safety Management Systems Requirements 21 Pages ( OHSAS 18001:2007 IDT) Gr 3 This standard specifies requirements for an occupational health and safety management systems.Advertising and Marketing Communication .100 Ed.Code of Practice for the Handling. 5 The standard specifies the requirement for the layout.Phytosanitary Priciples for the Protection of Plants and the Application of Phytosanitary Measures in International Trade (ISPM N0. 13. 1 : 2006.080 Ed.Advertising . fittings and filling ratio of tanks used in the transportation of LPG in bulk by road. 1 Services . Commercial. It establishes the basic style and formats for the presentation and publication of a Ghana Standards __________________________________________________________________________________________ GS 1014 : 2011 03. propane and liquefied petroleum gas equipment. 1 Petroleum and Petroleum Products .100. Presentation and 61 Pages Publishing of Ghana Standards Gr. 10 This standard applies to all advertisement and other marketing communication for the promotion of any kind of goods and services.20 Ed.The Handling. __________________________________________________________________________________________ GS 1015 : 2011 65. 2 This standard contains recommendations for the design. IDT) 7 Pages Gr 1 This standard describes phytosanitary principles for the protection of plants that are embodied in the International Plant Protection Convention (IPPC) and elaborated in its International Standard for Phytosanitary Measures.01. It covers principles related to the protection of plants. and operating practice __________________________________________________________________________________________ GS 1008 : 2011 03. 1 Documentation . pipework and fitting up to the outlet of the first pressure reduction stage in the line __________________________________________________________________________________________ GS 1006-4 : 2010 75.Guidelines for the Technical Preparation. Distribution and Maintenance of Liquefied Petroleum Gas in Domestic. construction.020.080 GS 1006-3 : 2010 Ed. and of storage vessels of individual water capacity exceeding 500 l and associated vaporizer. IDT) 8 Pages Gr 1 The standard describes procedures for the inspection of consignments of plants. __________________________________________________________________________________________ GS 1020 : 2011 65. __________________________________________________________________________________________ GS 1019 : 2011 65. IDT) 10 Pages Gr 1 The standard describes phytosanitary measures to reduce the risk of introduction and/or spread of quarantine pests associated with wood packaging material made of coniferous and non-coniferous raw wood.99 Ed. 1 Phytosanitary Measures . operating and revising the system __________________________________________________________________________________________ GS 1021 : 2011 65.99 Ed. IDT ) 9 Pages Gr 1 This standard provides guidance on the structure and content of the International Plant Protection Convention (IPPC) diagnostic protocols for regulated pest.Phytosanitary Principles for the Protection of Plants and the Application of Phytosanitary Measures in International Trade (ISPM N0.Phytosanitary Priciples for the Protection of Plants and the 17 Pages Application of Phytosanitary Measures in International Trade (ISPM N0. IDT) Gr 2 The standard describes the structure and operation of a phytosanitary import regulatory system and the rights. 1 Phytosanitary Measures . the establishment of pest free areas and. the preparation of pest lists. including Analysis of Environmental Risks and Living Modified Organisms 28 Pages Gr 3 This standard provides details for the conduct of pest risk analysis (PRA) to determine if pest are quarantine pest. 1 Phytosanitary Measures . The provide at least the minimum requirements for reliable diagnosis of regulated pests.99 Ed. where appropriate. 1 Phytosanitary Measures . 7 : 1997. It describes the integrated processes to be used for risk assessment as well as the selection of risk management options. 15 : 2002.020. in use in international trade __________________________________________________________________________________________ GS 1018 : 2011 65. obligations and responsibilities which should be considered in establishing. IDT ) 6 Pages Gr 1 This standard describe the components of survey and monitoring systems for the purpose of pest detection and the supply of information for the use in pest risk analyses.Export Certification Systems (ISPM N0.020.99 Ed. 20 : 2004. IDT ) 6 Pages Gr 1 This standard describes the components of a national system for the issuance of phytosanitary certificates.020. 6 : 1997. plants products and other regulated articles at import and export. 23 : 2005.020.Phytosanitary Principles for the Protection of Plants and the Application of Phytosanitary Measures in the International Trade ( ISPM N0. 1 Phytosanitary Measures .99 Ed. __________________________________________________________________________________________ GS 1017 : 2011 65.Pest Risk Analysis for Quarantine Pest.99 Ed.020.Diagnostic Protocols for Regulated Pests (ISPM N0.020.99 GS 1016 : 2011 Ed. __________________________________________________________________________________________ GS 1022 : 2011 65.020. The protocols describe procedures and methods for the official diagnosis of regulated pests that are relevant for international trade. __________________________________________________________________________________________ 65 .Guidelines on Surveillance (ISPM N0. 1 Phytosanitary Measures . 1 Phytosanitary Measures . 27 : 2006.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 65. 1 Phytosanitary Measures .020. IDT) 12 Pages Gr 2 The standards describes principles and guidelines for the preparation and issue of phytosanitary certificates and phytosanitary certificates for re-export __________________________________________________________________________________________ GS 1025 : 2011 65.020 5 Pages Gr 1 These guidelines recommend procedures for the nutrition labelling of foods. 5 : 2006. 25 : 2006.Guidelines for Phytosanitary Certificates ( ISPM N0. The use of additives in conformance with this standard is considered to be technologically justified.Consignments in Transit (ISPM N0. __________________________________________________________________________________________ GS CAC/GL 1 : 1991Ψ Published by GSA in 2008 Codex General Guidelines on Claims 67.Glossary of Phytosanitary Terms (ISPM N0. 1 Phytosanitary Measures . Only food additives that have been assigned an Acceptable daily intake (ADI) or determined on the basis of other criteria to be safe by the joint FAO/WHO Expert Committee on Food Additives (JECFA) and an International Numbering System (INS) designation by Codex will be considered for inclusion in the Standard.7: 2006Ψ 67.10 Published by GSA in 2008 Standard Test Methods for Sampling and Testing Fly Ash or Natural pozzolana for use in 9 Pages Portland.020.Cement Concrete Gr 1 The test methods in this standard cover procedures for sampling and testing fly ash and raw or calcined pozzolans for use in portland-cement concrete __________________________________________________________________________________________ GS CAC /STAN 192 : 1995. IDT) 37 Pages Gr 4 This standard list terms and definitions with specific meaning for phytosanitary systems worldwide. __________________________________________________________________________________________ GS CAC/GL 2 : 2006Ψ Published by GSA in 2008 Guidelines on Nutrition Labelling 67.99 Ed.020.99 Ed. __________________________________________________________________________________________ 66 .20 Published by GSA in 2007 General Standard on Food Additives 186 Pages Gr 19 This standard contains food additives listed herein are recognized as suitable for used in foods in conformance with the provisions of this standard.020 3 Pages Gr 1 These guidelines relate to claims made for a food irrespective of whether or not the food is covered by an individual codex standard. IDT) 5 Pages Gr 1 This standard describes procedures to identify. 12 : 2001.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS 1023 : 2011 65. in such a manner that any phytosanitary measures applied in the country of transit are technically justified and necessary to prevent the introduction into and/or spread of pests within that country __________________________________________________________________________________________ GS C 311 : 2005Ψ 91.100. 1 Phytosanitary Measures .Rev.220. It also provide a harmonized internationally agreed vocabulary associated with the implementation of the International Plant Protection Convention (IPPC) and (ISPMs) __________________________________________________________________________________________ GS 1024 : 2011 65.99 Ed. assess and manage phytosanitary risks associated with consignments of regulated articles which pass through a country without being imported. where required by the authorities having jurisdiction. __________________________________________________________________________________________ GS CAC/GL 24 : 1997Ψ 67.020 Replaces GS 66 : 1990 (Pub by GSA in 2006) Recommended International Code of Practice .100. __________________________________________________________________________________________ GS CAC/RCP 57 : 2004Ψ 57. These guidelines apply to the use of the term Halal and equivalent terms in claims as defined in the General standards for the labelling of prepackaged foods and its use in trademarks.020 Published by GSA in 2007 Code of Hygienic Practice for Fresh Fruits and Vegetables 30 Pages Gr 3 This standard covers general hygienic practices for the primary production and packing of fresh fruits and vegetables cultivated for human consumption in order to produce a safe and wholesome product. particularly for those intended to be consumed raw. setting out the necessary hygiene conditions for producing food which is safe and suitable for consumption.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CAC/GL 23 : 2004Ψ 67.General Principles of Food Hygiene 31 Pages Gr 4 This standard follows the food chain from primary production to the final consumer. 4 : 2003Ψ 67. processing and handling of milk and milk products. It does not extend to the production of raw drinking milk. __________________________________________________________________________________________ GS CAC/RCP 2 : 1969Ψ 67. __________________________________________________________________________________________ GS CAC/GL 50 : 2004Ψ 67. __________________________________________________________________________________________ 67 . __________________________________________________________________________________________ GS CAC/RCP 1.020 Published by GSA in 2008 General Guidelines for the use of the term "HALAL" 3 Pages Gr 1 These guidelines recommend measures to be taken on the use of Halal claims in food labelling.020 Published by GSA in 2008 Guidelines for use of Nutrition and Health Claims 5 Pages Gr 1 These guidelines relate to the use of nutrition and health claims in food labelling and . Rev. These guidelines are intended to supplement the Codex General Guidelines on Claims and do not supersede any prohibition contained therein.080 Published by GSA in 2008 Recommended International Code of Hygienic Practice for Canned Fruit and Vegetable 7 Pages Products Gr 1 This code of hygienic practice applies to fruit and vegetable products which are packed in hermetically sealed containers and which are processed by heat either before or after being filled into the containers __________________________________________________________________________________________ GS CAC/RCP 53 : 2003Ψ 67.99 Published by GSA in 2008 Code of Hygienic Practice for Milk and Milk Products 32 Pages Gr 3 This standard applies to the production. brand names and business names.020 Published by GSA in 2006 General Guidelines on Sampling 69 Pages Gr 7 This standard is designed to ensure that fair and valid sampling procedures are used when food is being tested for compliance with a particular codex commodity standard. in advertising. 080 Published by GSA in 2003 Specification for Canned Tomatoes 6 Pages Gr 1 Applies to canned tomatoes prepared from washed.10 Published by GSA in 2003 Specification for Honey 7 Pages Gr 1 Applies to all honeys produced by honey bees and covers all styles of honey presentations which are processed and ultimately intended for direct consumption. __________________________________________________________________________________________ GS CODEX STAN 17 : 1981Ψ Published by GSA in 2003 Specification for Canned Applesauce.10 52 Pages Gr 6 This code covers hygiene provisions for raw meat. __________________________________________________________________________________________ GS CAC/RM 42 : 1969. ripened tomatoes. conforming to the characteristics of phaseolus vulgaris L. meat preparations and manufactured meat from the time of live animal production up to the point of retail sale. __________________________________________________________________________________________ GS CODEX STAN 1 : 2005Ψ 67. 67.red or reddish varieties . if any. Mill.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CAC/RCP 58 : 2005Ψ Published by GSA in 2006 Meat and Meat Products .080 7 Pages Gr 1 Applies to canned beans as a product prepared from succulent pods of the fresh green bean or wax bean plant. which may be repacked into retail packs. clean and packed with or without a suitable liquid packing medium and processed by heat.230 Published by GSA in 2008 General Standard for the Labelling of Prepackaged Foods together with its Draft 8 Pages Amendment Gr 1 This standard applies to the labelling of all prepackaged foods to be offered as such to the consumer or for catering purposes and to certain aspects relating to the presentation thereof. from which strings.020:67.080 3 Pages Gr 1 Applies to canned applesauce for direct consumption including for catering purposes or for repacking if required. __________________________________________________________________________________________ GS CODEX STAN 13 : 1981Ψ 67. and phaseolus coccineus L. covers honey which is packed for sale in bulk containers.Code of Hygienic Practice for Meat 67. conforming to the characteristics of the fruit of lycopersicum esculentum P. Rev 1994Ψ Replaces GS 44 : 1973 (Pub by GSA in 2006) Sampling Plans for Prepackaged Foods 67. __________________________________________________________________________________________ 68 .120. and stems have been removed.180. __________________________________________________________________________________________ GS CODEX STAN 12 : 1981Ψ 67. __________________________________________________________________________________________ GS CODEX STAN 16 : 1981Ψ Replaces GS 11:1970 (Pub by GSA in 2003) Specification for Canned Green Beans and Canned Wax Beans 67.230 11 Pages Gr 2 This standard applies to the acceptance of defective units in lots of prepackaged foods as defined in individual Codex Standards for the purpose of determining the acceptability or otherwise of the lot. 15 Pages Gr 2 This standard applies to virgin olive oil. It includes oils and fats that have been subjected to processes of modification (such as trans-esterification or hydrogenation) or fractionation. 6 Pages Gr 1 Applies to sweet corn prepared from clean. seasoning ingredients. wild growing fungi of the species Cantharellus cibarius.080 Published by GSA in 2003 Specification for Canned Sweet Corn.10 Published by GSA in 2003 Specification for Olive Oil. supplied fresh after sorting and packing.10 Replaces GS14:1970 (Pub by GSA in 2003) Specification for Edible Fats and Oils not covered by Individual Standards 6 Pages Gr 1 This standard applies to oils and fats and mixtures thereof in a state for human consumption. conforming to the characteristics of Zea mays L. Virgin and Refined. or with suitable nutritive sweeteners.080 Published by GSA in 2003 Specification for Edible Fungi and Fungus Products 13 Pages Gr 2 This standard applies to general requirements applicable to all edible fungi.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CODEX STAN 18 : 1981Ψ 67. __________________________________________________________________________________________ GS CODEX STAN 40 : 1981Ψ 67. __________________________________________________________________________________________ 69 . except canned cultivated mushrooms of the genus Agaricus. __________________________________________________________________________________________ GS CODEX STAN 38 : 1981Ψ 67. and other ingredients appropriate to the product. refined olive-pomace oil.080 Published by GSA in 2003 Specification for Fresh Fungus "Chanterelle" 3 Pages Gr 1 This standard applies to edible. so as to prevent spoilage. refined olive oil. in an appropriate manner. sound kernels of sweet corn.200. and for Refined Olive-Pomace Oil. __________________________________________________________________________________________ GS CODEX STAN 19 : 1999Ψ 67. before and after being sealed in a container.080 Published by GSA in 2003 Specification for Canned Mushrooms. after preparation and packaging.080 Published by GSA in 2003 Specification for Dried Edible Fungi 4 Pages Gr 1 This standard applies to dried fungi (including freeze-dried fungi). whether fresh or processed permitted for sale by the competent authorities in the consuming countries. blends of refined olive oil and virgin olive and blends of refined oilve-pomace oil and virgin olive oil. packed with a suitable liquid packing medium. and processed by heat. 7 Pages Gr 1 Applies to canned mushrooms prepared from fresh mushrooms conforming with the characteristics of cultivated varieties of the genus Agaricus (Psallliota). __________________________________________________________________________________________ GS CODEX STAN 55 : 1981Ψ 67. which may be the creamy component from corn kernels. whole or sliced. __________________________________________________________________________________________ GS CODEX STAN 33 : 1981Ψ 67. __________________________________________________________________________________________ GS CODEX STAN 39 : 1981Ψ 67.200. of all edible species. 080 6 Pages Gr 1 Applies to canned strawberries. clean. 67. __________________________________________________________________________________________ GS CODEX STAN 62 : 1981Ψ Published by GSA in 2003 Specification for Canned Strawberries 67. whole shelled immature (green) seeds of garden pea varieties conforming with the characteristics of the species pisum sativum L.080 9 Pages Gr 1 Applies to asparagus prepared from the edible portion of stalks of varieties of the asparagus plant conforming to the characteristics of asparagus officinalis L. Link) which have been suitably treated or processed and which is offered for direct consumption as table olives. of proper maturity and from which extraneous matter including calices and stems have been removed.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CODEX STAN 56 : 1981Ψ Published by GSA in 2003 Specification for Canned Asparagus 67. __________________________________________________________________________________________ 70 . 67.080 5 Pages Gr 1 Applies to canned pears offered for direct consumption including for catering purposes or for repacking if required. __________________________________________________________________________________________ GS CODEX STAN 66 : 1987Ψ Published by GSA in 2003 Specification for Table Olives 67. the product prepared from strawberries of varieties (cultivars) conforming to the characteristics of the Genus Fragaria which are whole. 6 Pages Gr 1 Applies to canned raspberries prepared from raspberry varieties conforming to the characteristics of the fruit of Rubus idaeus L. and may be peeled or unpeeled.080 19 Pages Gr 2 This standard applies to the fruit of the cultivated olive-tree (Olea europaea sativa Hoffg. mature mandarin oranges conforming to the characteristics of citrus reticulata blanco. __________________________________________________________________________________________ GS CODEX STAN 61 : 1981Ψ Published by GSA in 2003 Specification for Canned Pears. reasonably sound.080 9 Pages Gr 1 Applies to canned mandarin oranges prepared from sound. substantially sound. __________________________________________________________________________________________ GS CODEX STAN 60 : 1981Ψ 67. __________________________________________________________________________________________ GS CODEX STAN 68 : 1981Ψ Published by GSA in 2003 Specification for Canned Mandarin Oranges. __________________________________________________________________________________________ GS CODEX STAN 58 : 1981Ψ Published by GSA in 2003 Specification for Canned Green Peas.080 Published by GSA in 2003 Specification for Canned Raspberries. It also covers olives packed in bulk containers which are intended for repacking into consumer size containers.080 6 Pages Gr 1 Applies to green peas prepared from fresh or frozen clean. 67. 67. 67. __________________________________________________________________________________________ GS CODEX STAN 81 : 1981Ψ Published by GSA in 2003 Specification for Canned Mature Processed Peas.080 Published by GSA in 2008 Standard for Canned Fruit Cocktail 9 Pages Gr 1 This standard gives description of canned fruit cocktail prepared from a mixture of small fruits and small pieces of fruits which may be fresh. They may be either in ready-to-eat form or in dry form requiring reconstitution with water only. 3 This standard is divided into two sections.080 6 Pages Gr 1 Applies to the product prepared from citrus fruit and commonly referred to as Marmalade and covers general and specific provisions. 67. 1 This standard is intended primarily fir use during the normal infant's weaning period and also for the progressive adaptation of infants and children to ordinary food.30 6 Pages Gr 1 This standard applies to canned sardines and sardine-type products packed in water or oil or other suitable packing medium __________________________________________________________________________________________ 71 . Section A refers to infant formula. and section B deals with formulas for special medical purposes intended for infants __________________________________________________________________________________________ GS CODEX STAN 73 : 1981Ψ Published by GSA in 2009 Standard for Canned Baby Foods 67. __________________________________________________________________________________________ GS CODEX STAN 78 : 1981Ψ 67. threshed.080 5 Pages Gr 1 Applies to processed peas prepared from clean substantially sound.060. __________________________________________________________________________________________ GS CODEX STAN 94 : 1981Ψ Published by GSA in 2008 Standard for Canned Sardines and Sardine-Type Products 67. frozen or canned. __________________________________________________________________________________________ GS CODEX STAN 80 : 1981Ψ Published by GSA in 2003 Specification for Citrus Marmalade 67. whole.060.230 6 pages Gr. dried mature seeds of green pea varieties conforming with the characteristics of the species Pisum sativum L.080 9 Pages Gr 1 This standard applies to a class of fruit spreads commonly known as jams and jellies and which may be prepared from single fruits or from two or more fruits. __________________________________________________________________________________________ GS CODEX STAN 79 : 1981Ψ Published by GSA in 2003 Specification for Jams (Fruit Preserves and Jellies) 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CODEX STAN 72 : 1981Ψ 67.120.230 Published by GSA in 2009 Standard for Infant Formula and Formulas for Special Medical Purposes Intended for Infants 21 pages Gr. __________________________________________________________________________________________ GS CODEX STAN 116 : 1981Ψ Published by GSA in 2003 Specification for Canned Carrots.230 Published by GSA in 2009 Standard for Processed Cereal . __________________________________________________________________________________________ GS CODEX STAN 115 : 1981Ψ Published by GSA in 2003 Specification for Pickled Cucumbers (Cucumber Pickles) 67. __________________________________________________________________________________________ GS CODEX STAN 107:1981Ψ 67. green tops and peel have been removed.060.220.Based Foods for Infants and Young Children 9 pages Gr.080 11 Pages Gr 1 This standard applies to Pickled Cucumbers (in some countries Cucumber Pickles) intended for direct consumption. This standards also applies to food "processing aids".CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CODEX STAN 99 : 1981Ψ Published by GSA in 2008 Standard for Canned Tropical Fruit Salad 67.080 9 Pages Gr 1 This standard gives description of canned tropical fruit salad prepared from a mixture of basic fruits __________________________________________________________________________________________ GS CODEX STAN 074 : 1981 REV . any reference to food additives includes food processing aids.020:67. from which the leaves. __________________________________________________________________________________________ 72 . __________________________________________________________________________________________ GS CODEX STAN 131 : 1981Ψ Published by GSA in 2003 Specification for Unshelled Pistachio Nuts 67. 67. taking into account infants' individual nutritional requirements. 67. 1: 2006 67.080 4 Pages Gr 1 Applies to unshelled pistachios from varieties of Pistacia vera L.20 Published by GSA in 2008 General Standard for Labelling of Food Additives when sold as such 5 Pages Gr 1 This standard applies to the labelling of "food additives" sold as such whether by retail or other than by retail. either in natural or in processed condition and which are offered for direct consumption. __________________________________________________________________________________________ GS CODEX STAN 143 : 1981Ψ Published by GSA in 2003 Specification for Canned Dates.080 6 Pages Gr 1 Applies to commercially prepared whole dates in pitted or un-pitted styles packed ready for direct consumption. and for feeding young children as part of a progressively diversified diet. including sales to caterers and food manufacturers for the purpose of their businesses. It also covers unshelled pistachios which are packed in bulk containers and which are intended for repacking in consumer size containers.based foods intended for feeding infants as a complementary food generally from the age of 6 months onwards. 1 This standard covers processed cereal . sound roots of carrot varieties (cultivars) conforming with the characteristics of the species daucus carota L. 67.080 10 Pages Gr 1 Specifies canned carrots prepared from clean. 1 to be offered as such to the consumer or for catering purposes and to certain aspects relating to the presentation thereof.080 Published by GSA in 2003 Specification for Canned Mangoes 11 Pages Gr 2 Applies to mango prepared from stemmed. __________________________________________________________________________________________ GS CODEX STAN 160 : 1987Ψ 67.080.67. chopped.01 Published by GSA in 2003 Specification for Fresh Carambola 6 Pages Gr 1 Applies to the fruit of commercial varieties of carambolas grown from Averrhoa carambola L. fresh. shredded or comminuted.080. without the silk and anthers of commercial varieties of baby corn (corn inflorescence) grown from Zea Mays L. __________________________________________________________________________________________ GS CODEX STAN 146 : 1985Ψ 67. clean. __________________________________________________________________________________________ GS CODEX STAN 159 : 1981Ψ 67. Carambolas for industrial processing are excluded. peeled. to be supplied fresh to the consumer. mature chestnuts of varieties conforming to the characteristics of the species castanea crenata sieb et zucc. after preparation and packaging.020. sound mango fruits (Mangifera indica L. 7 Pages Gr 1 Applies to chestnuts prepared from fresh.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CODEX STAN 144 : 1981Ψ Published by GSA in 2003 Specification for Canned Palmito.080 Published by GSA in 2003 Specification for Mango Chutney 3 Pages Gr 1 This standard applies to mango chutney as a product prepared from washed. 67. __________________________________________________________________________________________ 73 . 7 Pages Gr 1 Applies to the cobs. __________________________________________________________________________________________ GS CODEX STAN 145 : 1981Ψ 67. then heat processed which basic ingredients before or after being sealed in containers so as to prevent spoilage. after preparation and packaging.01 Published by GSA in 2003 Specification for Fresh Baby Corn. sound.080 9 Pages Gr 1 Covers the product known as canned palmito and is prepared with palmito as the predominant ingredient and which may include small quantities of vegetables as a garnish or seasoning and also spices and aromatic herbs. sound.of the oxalidaceae family.) which have been peeled and are sliced.230 Published by GSA in 2008 General Standard for the Labelling of and Claims for Prepackaged Foods for Special Dietary Uses 4 Pages Gr 1 This standard applies to the labelling of all prepackaged foods for special dietary uses as defined in section 2. husk and anthers to be supplied fresh to the consumer. __________________________________________________________________________________________ GS CODEX STAN 187 : 1993Ψ 67.080 Published by GSA in 2003 Specification for Canned Chestnuts and Canned Chestnut Puree. __________________________________________________________________________________________ GS CODEX STAN 188 : 1993Ψ 67. the Gramineae family. clean and mature fruit of commercial varieties conforming to the characteristics of the fruits of Mangifera indica L. separated from silk. and to claims made for such foods. aviation turbine fuels.. naphthas.lard.presented in a state for human consumption.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS CODEX STAN 197 : 1995Ψ Published by GSA in 2003 Specification for Avocado.10 Replaces GS 14:1970 (Pub by GSA in 2003) Specification for Named Animal Fats 7 Pages Gr 1 This standard applies to the following animal fats . after preparation and packaging. edible tallow . aviation gasolines.200.080. __________________________________________________________________________________________ GS CODEX STAN 255 : 2007Ψ Published by GSA in 2008 Codex Standard for Table Grapes 67.10 5 Pages Gr 1 Applies to sugars intended for human consumption without further processing. and Grades 1 and 2 burner fuels __________________________________________________________________________________________ GS D 95 : 2005Ψ 75. 1-D and 2-D regular and low sulfur diesel fuels special petroleum spirits. after preparation and packaging.020 Published by GSA in 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure1 55 Pages Gr 6 This test method covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as natural gasolines. __________________________________________________________________________________________ GS CODEX STAN 211 : 1999Ψ 67. tars. automotive spart-ignition engine fuels. light and middle distillates.01 8 Pages Gr 1 Applies to commercial varieties of bananas grown from Musa spp.180. (syn.020 Published by GSA in 2008 Standard Test method for Water in Petroleum Products and Bituminous Materials by 13 Pages Distillation Gr 2 This test method covers the determination of water in the range from 0 to 25% volume in petroleum products. (AAA) of the Musaceae family in the green state.080 4 Pages Gr 1 This standard applies to commercial varieties(cultivars) of table grapes grown from Vitis vinifera L. 67. rendered pork fat. __________________________________________________________________________________________ GS CODEX STAN 205 : 1997Ψ Published by GSA in 2003 Specification for Fresh Green Bananas.of the Vitaceae family. to be supplied fresh to the consumer. 67.080. Persea gratissima Gaertn) of the Lauraceae family to be supplied fresh to the consumer.01 6 Pages Gr 1 Applies to commercial varieties (cultivars) of avocados grown from persea americana Mill. __________________________________________________________________________________________ GS D 86 : 2005Ψ 75. and other bituminous materials by the distillation method __________________________________________________________________________________________ 74 . white spirits. to be supplied fresh to the consumer after preparation and packaging. Grapes for industrial processing are excluded. kerosines. __________________________________________________________________________________________ GS CODEX STAN 212 : 2001Ψ Published by GSA in 2003 Specification for Sugars 67. aviation turbine fuel.020 12 Pages Gr 2 This test method covers the determination of the existent gum content of aviation fuels.020 Published by GSA in 2008 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test 17 Pages Gr 2 This test method covers the determination of the corrosiveness to copper of aviation gasoline. kerosine. cleaners (Stoddard) solvent.020 10 Pages Gr 1 This test method covers the determination of the sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compound __________________________________________________________________________________________ GS D 1152 : 2006Ψ Published by GSA in 2008 Standard Specification for Methanol (Methyl Alcohol) 75. automotive gasoline. variable compression ratio.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS D 130 : 2004Ψ 75. (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of test __________________________________________________________________________________________ GS D 525 : 2005Ψ 75. lubricating oil.8*C __________________________________________________________________________________________ GS D 381 : 2004Ψ Published by GSA in 2008 Standard Test Method for Gum content in Fuels by Jet Evaporation 75. indirect injected diesel engine __________________________________________________________________________________________ GS D 664 : 2006Ψ 75.020 4 Pages Gr 1 This specification covers methanol (99. and gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37. four-stroke cycle. and the gum content of motor gasolines or other volatile distillates in their finished form.020 Published by GSA in 2008 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) 11 Pages Gr 2 This test method covers the determination of the stability of gasoline in finished form only. under accelerated oxidation conditions __________________________________________________________________________________________ GS D 613 : 2005Ψ Published by GSA in 2008 Standard Test Method for Cetane Number of Diesel Fuel Oil 75. diesel fuel. distillate fuel oil.020 69 Pages Gr 7 This test method determines the rating of diesel fuel oil in terms of an arbitrary scale of cetane numbers using a standard single cylinder.85 % grade) __________________________________________________________________________________________ 75 .020 Published by GSA in 2008 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration 17 Pages Gr 2 This test method covers procedures for the determination of acidic constituents in petroleum products and lubricants soluble or nearly soluble in mixtures of toluene and propan-2-ol __________________________________________________________________________________________ GS D 874 : 2006Ψ Published by GSA in 2008 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives 75. 325 kPa (14.05 %. Lacquer.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS D 1160 : 2006Ψ 75. and lacquer solvents and diluents __________________________________________________________________________________________ GS D 1688 : 2002Ψ Published by GSA in 2008 Standard Test Methods for Copper in Water 75.020 Published by GSA in 2008 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates used in 5 Pages Paint.020 Published by GSA in 2008 Standard Test Method for Density. or mixtures of petroleum and non petroleum products normally handled as liquids. at reduced pressures. of the range of boiling points for petroleum products that can be partially or completely vaporized at a maximum liquid temperature of 400 *C __________________________________________________________________________________________ GS D 1298 : 1999Ψ 75. or API gravity of crude petroleum. or soluble in hydrocarbon solvents __________________________________________________________________________________________ GS D 3231 : 2002Ψ Published by GSA in 2008 Standard Test Method for Phosphorus in Gasoline 75. Varnish. relative density (specific gravity).020 20 Pages Gr 2 These test methods cover the determination of copper in water by atomic absorption spectrophotometry __________________________________________________________________________________________ GS D 2500 : 2005Ψ Published by GSA in 2008 Standard Test Method for Cloud Point of Petroleum Products 75. Relative Density (Specific Gravity). in organic compounds and hydrocarbon mixtures used in paint. and Related Products Gr 1 This test method covers the determination of total acidity as acetic acid.020 Published by GSA in 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry 15 Pages Gr 2 This test method covers the determination of total sulfur in petroleum and petroleum products that are single-phase and either liquid at ambient conditions. in gasoline __________________________________________________________________________________________ 76 .020 Published by GSA in 2008 Standard Test Methods Distillation of Petroleum Products at Reduced Pressure 38 Pages Gr 4 This test method covers the determination. or api gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method 14 Pages Gr 2 This test method covers the laboratory determination using a glass hydrometer. petroleum products.696 psi) or less __________________________________________________________________________________________ GS D 1613 : 2006Ψ 75.020 10 Pages Gr 1 This test method covers the determination of phosphorus generally present as pentavalent phosphate esters or salts or both. in concentrations below 0. varnish. liquefiable with moderate heat.020 9 Pages Gr 1 This test method covers only petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness. and with a cloud point below 49*C __________________________________________________________________________________________ GS D 2622 : 2005Ψ 75. of the density. and having a Reid vapor pressure of 101. 020 Published by GSA in 2008 Standard Test Method for Calculated Cetane Index by Four Variable Equation 9 Pages Gr 1 The calculated cetane index by four variable equation provides a means for estimating the ASTM cetane number (Test Method D 613) of distillate fuels from density and distillation recovery temperature measurements __________________________________________________________________________________________ GS D 4814 . or solid state whose vapor pressure at ambient conditions is below 101 kPa (14.020 68 Pages Gr 7 This specification covers the establishment of requirements of automotive fuels for ground vehicles equipped with spark-ignition engines __________________________________________________________________________________________ GS D 4815 .020 Published by GSA in 2008 Standard Test Method for Determination of MTBE.020 Published by GSA in 2008 Standard Practice for Automatic Sampling of Petroleum and Petroleum Product 51 Pages Gr 6 This practice covers information for the design.020 Published by GSA in 2008 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil 18 Pages Gr 2 These test methods cover the determination of organic chloride in crude oils.04 : 2004Ψ 75.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS D 4057 : 2006Ψ 75. testing. installation.020 13 Pages Gr 2 This test method covers the determination of the amount of carbon residue (see Note 1) formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials __________________________________________________________________________________________ GS D 4737 : 2004Ψ 75. TAME. ETBE.04 : 2004Ψ 75. semi-liquid.7 psia) __________________________________________________________________________________________ GS D 4177 : 1995Ψ 75. and operation of automated equipment for the extraction of representative samples of petroleum and petroleum products from a flowing stream and storing them in a sample receiver __________________________________________________________________________________________ GS D 4530 : 2006Ψ Published by GSA in 2008 Standard Test Method for Determination of Carbon Residue (Micromethod) 75. TERTIAryAMYL Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography 23 Pages Gr 3 This test method covers the determination of ethers and alcohols in gasolines by gas chromatography __________________________________________________________________________________________ GS D 4929 . DIPE. using either distillation and sodium biphenyl reduction or distillation and microcoulometry __________________________________________________________________________________________ 77 .Ignition Engine Fuel 75.06 : 2006Ψ Published by GSA in 2008 Standard Specification for Automotive Spark .020 Published by GSA in 2008 Standard Practice for Manual Sampling of Petroleum and Petroleum Products 45 Pages Gr 5 This practice covers procedures for manually obtaining representative samples of petroleum products of a liquid. 020 12 Pages Gr 2 These test methods cover the determination of the total lead content of a gasoline. __________________________________________________________________________________________ GS D 6423 : 1999Ψ 75. phosphorus.020 Published by GSA in 2008 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol 11 Pages by Gas Chromatography Gr 2 This test method covers the determination of the ethanol content of denatured fuel ethanol by gas chromatography.2 and 20cSt(mm2/s) at room temperature. __________________________________________________________________________________________ GS D 5854 : 1996Ψ 75.98 : 1998Ψ Published by GSA in 2008 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy 75.020 Published by GSA in 2008 Standard Test Method for Determination of PHE of Ethanol. boron. __________________________________________________________________________________________ 78 . and Engine Oil by Ultraviolet Fluorescence 22 Pages Gr 3 This test method covers the determination of total sulfur in liquid hydrocarbons.020 Published by GSA in 2008 Standard Test Method for Vapor Pressure of Gasoline and Gasoline .020 GS D 4951 . sulfur.04 : 2004Ψ 75. and zinc in unused lubricating oils and additive packages __________________________________________________________________________________________ GS D 4953 . calcium.06 : 2006Ψ 75.06 : 2006Ψ 75. and Fuel Ethanol ED75-ED85 7 Pages Gr 1 This test method covers a procedure to determine a measure of the acid strength of high ethanol content fuels.020 Published by GSA in 2008 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons. __________________________________________________________________________________________ GS D 5501 . boiling in the range from approximately 25 to 400*c. molybdenum. and conditioning procedures that are required to ensure that a representative sample of the liquid petroleum or petroleum products is delivered from the primary sample container/receiver into the analytical test apparatus or into intermediate containers.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 75. Denatured Fuel Ethanol. Spark Ignition Engine Fuel.Oxygenate Blends 17 Pages ( Dry Method) Gr 2 This test method covers and is applicable to gasolines and gasoline-oxygenate blends with a vapor pressure range form 35 to 100 kPa. copper. mixing.020 Published by GSA in 2008 Standard Practice for Mixing and Handling of Liquid samples of Petroleum and Petroleum 31 Pages Products Gr 4 This practice covers the handling. Diesel Engine Fuel. __________________________________________________________________________________________ GS D 5059 . with viscosities between approximately 0. magnesium. __________________________________________________________________________________________ GS D 5453 .06 : 2006Ψ Published by GSA in 2008 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry 16 Pages Gr 2 This test method covers the quantitative determination of barium. using an automated coulometric titration procedure __________________________________________________________________________________________ GS F 625 : 1994Ψ Published by GSA in 2011 Standard Practice for Classifying Water bodies for Spill Control Systems 75. with Karl Fischer reagent.020 Published by GSA in 2008 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration 9 Pages Gr 1 This test method covers the determination of water from 0 to 2.020 Published by GSA in 2011 Standard Guide for Collecting Skimmer Performance Data in Controlled Environments 14 Pages Gr 2 The standard provides a guide for determing performance parameters of full-scale oil spill removal devices in recovering floating oil when tested in controlled environments __________________________________________________________________________________________ GS F 715 : 2007Ψ 75.020 11 Pages Gr. __________________________________________________________________________________________ GS E 203 : 2001Ψ Published by GSA in 2008 Standard Test Method for Water using Volumetric Karl Fischer Titration 75.020 3 Pages Gr 1 This standard practice creates a system of categories that classify water bodies relating to the control of spills of oil and other substances that flot on or into a body of water __________________________________________________________________________________________ GS F 631 : 1999Ψ 75.2 This standard test methods cover the development of laboratory test data which describe the performance of absorbent materials used to remove oils and other compatible fluids from water __________________________________________________________________________________________ 79 .1 This standard give test methods cover laboratory .020 21 Pages Gr 3 This test method is intended as a general guide for the application of the volumetric Karl Fischer (KF) titration for determining free water and water of hydration in most solid or liquid organic and inorganic compounds.conducted performance tests for coated fabrics used in spill control barriers or in temporary storage devices __________________________________________________________________________________________ GS F 716 : 2009Ψ Published by GSA in 2011 Standard Test Method for Sorbent Performance of Absorbents 75.020 Published by GSA in 2008 Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography 13 Pages Gr 2 This test method covers the quantitative determination of free and total glycerin in B-100 methyl esters by gas chromatography.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS D 6584 : 2007Ψ 75.020 Published by GSA in 2011 Standard Test Methods for Coated Fabrics used for Oil Spill Control and Storage 6 Pages Gr.0 % mass in most liquid organic chemicals. __________________________________________________________________________________________ GS E 1064 : 2005Ψ 75. 1 This standard defines the terminology used in the field of spill response barriers.020 Published by GSA in 2011 Standard Test Method for Sorbent Performance of Adsorbents 12 Pages Gr. 2 The standard covers design criteria requirements.It is directed toward those emergency response personnel who have had adequate hazardous material response training __________________________________________________________________________________________ 80 . 1 The standard test methods cover static laboratory tests of the strength of oil spill response boom under tensile loading __________________________________________________________________________________________ GS F 1127 : 2007Ψ 75. __________________________________________________________________________________________ GS F 1084 : 2008Ψ 75. 2 This standard describes methods to contain the spread of hazardous materials that have been discharged into the environment. Only those terms commonly used or peculiar to this field have been included __________________________________________________________________________________________ GS F 962 : 2004Ψ 75. The guide should be tailored by the trainer to fit specific circumstances that are present in the community or industry where a spill may occur. design geometry.020 Published by GSA in 2011 Standard Guide for Containment of Hazardous material Spills by Emergency Response Personnel 11 Pages Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 726 : 2006Ψ 75. 1 This standard is intended for sampling flowing or stationary oil / water mixtures. It is intended for use with oil spill recovery devices either in testing or in documentation of field performance __________________________________________________________________________________________ GS F 1093 : 1999Ψ 75. material characteristics.1 This standard covers a format for a hazardous materials spill initial response team training curriculum.020 Published by GSA in 2011 Standard Test Method for Tensile Strength Characteristics of Oil Spill Response Boom 7 Pages Gr.020 Published by GSA in 2011 Standard Specification for Oil Spill Response Boom Connection: Z-Connector 13 Pages Gr.020 5 Pages Gr. and desirable features for oil spill response boom connections. These criteria are intended to define minimum mating characteristics and are not intended to be restrictive to a specific configuration __________________________________________________________________________________________ GS F 1011 : 2007Ψ Published by GSA in 2011 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel 10 Pages Gr. This guide is designed to assist trainers of initial response personnel in assessing the content of training curriculum by providing guidelines for subject content against which these curricula may be evaluated. immiscible liquids from the surface of water __________________________________________________________________________________________ GS F 818 : 1993Ψ Published by GSA in 2011 Standard Terminology Relating to Spill Response Barriers 75.020 Published by GSA in 2011 Standard Guide for Sampling Oil / Water Mixtures for Oil Spill Recovery Equipment 6 Pages Gr. 2 The standard test method covers laboratory tests that describe the performance of adsorbents in removing nonemulsified oils and other floating. __________________________________________________________________________________________ GS F 1231 : 2008Ψ 75. It is aimed at minimizing the environmental impacts of oil spills.020 Published by GSA in 2011 Standard Guide for Ecological Considerations for the Restriction of the use of Surface 4 Pages Washing Agents : Impermeable Surfaces Gr. 1 The standard covers design criteria.020 Published by GSA in 2011 Standard Guide for using Aqueous Foams to Control the Vapour Hazard from Immiscible Volatile Liquids 8 Pages Gr. It also covers spray systems employing booms and nozzles. Rivers and Creeks 7 Pages Gr.020 Published by GSA in 2011 Standard Guide for Oil Spill Dispersant Application Equipment : Boom and Nozzle Systems 10 Pages Gr. Lakes and Large Water Bodies 6 Pages Gr.1 This standard guide covers the use of oil spill dispersants to assist in the control of oil spills. It is aimed at minimizing the environmental impacts of oil spills. It is aimed at minimizing the environmental impacts of oil spills. material characteristics. and essential features for oil spill dispersant application systems.1 This standard guide covers the use of surface washing agents to assist in the control of oil spill. 1 This standard guide covers the use of oil spill dispersants to assist in the control of oil spills. 1 This standard guide covers the use of surface washing agents to assist in the cleanup of oil spills.020 Published by GSA in 2011 Standard Guide for Ecological Considerations for the use of Oil Spill Dispersants in Freshwater and other Inland Environments.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 1129/F 1129M : 2009Ψ 75. It is aimed at minimizing the environmental impacts of oil spills. 1 This standard guide covers the use of oil spill dispersants to assist in the control of oil spills.C for vapor control or fire suppression of land spillor contained spills on water __________________________________________________________________________________________ GS F 1209 : 2008Ψ 75.020 Published by GSA in 2011 Standard Guide for Ecological Considerations for the Restriction of the use of Surface 7 Pages Washing Agents : Permeable Land Surfaces Gr.020 Published by GSA in 2011 Standard Guide for Ecological Considerations for the use of Oil Spill Dispersants in Freshwater and other Inland Environments. requirements. 1 The standard guide restricts itself to addressing the application of foam to water immiscible liquid and some water reactive compounds with boiling points above 15.020 Published by GSA in 2011 Standard Guide for Ecological Considerations for the use of Oil Spill Dispersants in 7 Pages Freshwater and other Inland Environments. __________________________________________________________________________________________ GS F 1413 : 2007Ψ 75. __________________________________________________________________________________________ GS F 1279 : 2008Ψ 75. Ponds and Sloughs Gr. __________________________________________________________________________________________ GS F 1210 : 2008Ψ 75. __________________________________________________________________________________________ 81 . __________________________________________________________________________________________ GS F 1280 : 2008Ψ 75. 1 The standard guide is intended as a guideline for the standardized reporting of performance data of pumps and pump systems that may be considered for use in oil spill response operations __________________________________________________________________________________________ 82 . 1 The standard covers uniform procedures for determining and reporting the dosage rate of oil spill dispersant application equipment __________________________________________________________________________________________ GS F 1523 : 1994Ψ 75. 2 The standard covers considerations for the use of membrane technology in the mitigation of dilute concentrations of spilled chemicals into ground and surface water __________________________________________________________________________________________ GS F 1599 : 1995Ψ 75.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 1460 : 2007Ψ 75.020 Published by GSA in 2011 Standard Guide for use of Advanced Oxidation Process for the Mitigation of Chemical 8 Pages Spills Gr.020 Published by GSA in 2011 Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems 4 Pages Gr. 1 This standard defines the terminology used in test methods.020 Published by GSA in 2011 Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps 5 Pages Gr. guides and practices related to bioremediation technology __________________________________________________________________________________________ GS F 1607 : 1995Ψ 75. 1 This standard guide covers the considerations for advanced oxidation processes ( AOPs) in the mitigation of spilled chemicals and hydrocarbons dissolved into ground and surface waters __________________________________________________________________________________________ GS F 1525 : 1996Ψ Published by GSA in 2011 Standard Guide for use of Membrane Technology in Chemical Spills 75.020 Published by GSA in 2011 Standard Guide for Selection of Booms in Accordance with Water Body Classifications 3 Pages Gr.020 Published by GSA in 2011 Standard Guide for Collecting Performance Data on Temporary Storage Devices 13 Pages Gr. specifications. 1 The standard covers a guideline for measuring the performance parameters of full-scale temporary storage devices that would be used to store oil and oil water mixtures __________________________________________________________________________________________ GS F 1600 : 1995Ψ Published by GSA in 2011 Standard Terminology Relating to Bioremediation 75.020 13 Pages Gr.020 5 Pages Gr. 1 This standard covers the selection of containment boom that maybe used to control spill of oil and other substances that float on a body of water __________________________________________________________________________________________ GS F 1524 : 1995Ψ 75. 1 The test method in this standard covers the measurement of the deposition of an aerially applied dispersant on the surface of the ground or water __________________________________________________________________________________________ GS F 1778 : 1997Ψ 75. 1 This standard guide covers the standardized terminology and types of observational data and indices appropriate to describe the quality.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 1657 : 1996Ψ 75. 1 The standard guide covers considerations for the maintenance. equipment manufacturers. nature.020 Published by GSA in 2011 Standard Guide for Selection of Skimmers for Oil .1 This standard provides a standard practice for the joining of oil spill containment boom connectors in emergencies __________________________________________________________________________________________ GS F 1686 : 2009Ψ 75.020 Published by GSA in 2011 Standard Practice for Emergency Joining of Booms with Incompatible Connectors 5 Pages Gr.020 Published by GSA in 2011 Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines 10 Pages Gr.020 Published by GSA in 2011 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill 8 Pages Dispersants Gr. users.020 Published by GSA in 2011 Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on 11 Pages Land Gr.020 Published by GSA in 2011 Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines 13 Pages Gr. 2 This standard guide covers considerations for selecting skimmer systems for the recovery of marine-oil spill. storage and use of oil spill dispersant application systems __________________________________________________________________________________________ GS F 1738 : 2010Ψ 75.020 Published by GSA in 2011 Standard Guide for use of Oil Spill Dispersant Application Equipment during Spill Response : Boom and Nozzle Systems 10 Pages Gr. and government agencies with a standard on the equipment selection process for the removal of oil from the marine environment __________________________________________________________________________________________ 83 . 2 The guide provide recommendations for the use of biodegradation enhancing agents for remediating oil spills in terrestrial environments __________________________________________________________________________________________ GS F 1737/ F 1737M : 2010Ψ 75. 2 The standard covers field procedures by which data may be collected in a systematic manner to document and assess the oiling conditions on shorelines __________________________________________________________________________________________ GS F 1687 : 2009Ψ 75. It also provide oil spill response planners. and distribution of oil and physical oiling conditions on shorelines that have been contaminated by an oil spill __________________________________________________________________________________________ GS F 1693 : 1996Ψ 75.Spill Response 16 Pages Gr. 020 12 Pages Gr .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 1779 : 2008Ψ Published by GSA in 2011 Standard Practice for Reporting Visual Observations of Oil on Water 75. 1 This standard cover methods of reporting and recording visual observations of oil on water and related response activities __________________________________________________________________________________________ GS F 1780 : 1997Ψ Published by GSA in 2011 Standard Guide for Estimating Oil Spill Recovery System Effectiveness 75.020 Published by GSA in 2011 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness using the Swirling Flask 10 Pages Gr.020 12 Pages Gr. 1 The standard test method covers the procedure to determine the effectiveness of oil spill dispersants on various oils in the laboratory. __________________________________________________________________________________________ GS F 1990 : 2007Ψ Published by GSA in 2011 Standard Guide for In-Situ Burning of Spilled Oil : Ignition Devices 75. __________________________________________________________________________________________ 84 . 3 The standard evaluate a number of qualitative performance parameters for full-scale oil spill removal systems or individual components of those systems. 1 This standard covers the use of chemical cleaning agents on oiled shorelines. It also provide information that will enable oil-spill responders to select the appropriate techniques and devices to successfully ignite oil spilled on water __________________________________________________________________________________________ GS F 2008 : 2000Ψ Published by GSA in 2011 Standard Guide for Qualitative Observations of Skimmer Performance 75.020 23 Pages Gr.020 Published by GSA in 2011 Standard Guide for use of Chemical Shoreline Cleaning Agents : Environmental and 10 Pages Operational Considerations Gr.2 This standard gives the key factors to consider in estimating the effectiveness of containment and recovery systems that may be used to assist in the control of oil spills on water __________________________________________________________________________________________ GS F 1788 : 2008Ψ 75. __________________________________________________________________________________________ GS F 2059 : 2006Ψ 75.2 The standard guide covers the use of in-situ burning to assist in the control of oil spills on water __________________________________________________________________________________________ GS F 1872 : 2005Ψ 75.020 9 Pages Gr. 2 This standard relates to the use of in-situ burning of spilled oil.020 Published by GSA in 2011 Standard Guide for In-Situ Burning of Oil Spills on Water : Environmental and 14 Pages Operational Considerations Gr. 020 Published by GSA in 2011 Standard Guide for Ecological Considerations for the use of Chemical Dispersants in Oil Spill Response : Tropical Environments 17 Pages Gr. 1 The standard covers a set of criteria to evaluate the performance. 1 This standard describes the features and processes that should be included in an oil. and essential features of fire. 2 The standard covers the evaluation of the effectiveness of full-scale oil spill containment booms in a controlled test facility __________________________________________________________________________________________ GS F 2152 : 2007Ψ Published by GSA in 2011 Standard Guide for In-Situ Burning of Spilled oil: Fire. __________________________________________________________________________________________ GS F 2205 : 2007Ψ 75.020 8 Pages Gr. __________________________________________________________________________________________ GS F 2230 : 2008Ψ Published by GSA in 2011 Standard Guide for In-Situ Burning of Spills on Water : Ice Conditions 75.020 5 Pages Gr. 1 This standard addresses in-situ burning as a response tool for oil spills occurring on waters with ice present __________________________________________________________________________________________ GS F 2327 : 2008Ψ 75.spill trajectory and fate model __________________________________________________________________________________________ GS F 2084 / F 2084M : 2001Ψ 75.Resistant Boom 75. 2 The standard covers recommendations for use of chemical dispersants to assist in the control on oil spills and is written with the goal of minimizing the environmental impacts of oil spills.020 Published by GSA in 2011 Standard Guide for Collecting Containment Boom Performance Data in controlled 15 Pages Environments Gr.resistant oil spill containment boom __________________________________________________________________________________________ GS F 2204 : 2009Ψ Published by GSA in 2011 Standard Guide for Describing Shoreline Response Techniques 75.020 Published by GSA in 2011 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and 10 Pages Monitoring of Oil on Water Gr. 2 The standard guide describes methods of cleaning and remediating shorelines containing stranded oil.020 11 Pages Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 2067 : 2007Ψ Published by GSA in 2011 Standard Practice for Development and use of Oil -Spill Trajectory Models 75. 1 The standard provides information and criteria for selection of remote sensing systems for the detection and monitoring of oil on water __________________________________________________________________________________________ 85 . material characteristics.020 20 Pages Gr. 1 The standard specification covers design criteria requirements.020 8 Pages Gr.020 Published by GSA in 2011 Standard Guide for Determining Net Environmental Benefit of Dispersant Use 10 Pages Gr. 1 It describes a practical method for determining the buoyancy to weight (B/W) ratio of oil spill containment boom __________________________________________________________________________________________ 86 .020 Published by GSA in 2011 Standard Guide for Oil Spill Dispersant Application Equipment : Single-Point Spray 7 Pages Systems Gr. requirements. __________________________________________________________________________________________ GS F 2465 : 2005Ψ 75.020 Published by GSA in 2011 Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom 6 Pages Gr.020 12 Pages Gr. design geometry. material characteristics. 1 The standard provides information on shoreline types and sensitive habitats that can be used as guidance for selecting appropriate cleaning techniques following an oil spill. 1 This standard guide covers considerations in determining net environmental benefit of dispersant use on oil spills. 1 The standard provides information and criteria for estimating the thickness of oil on water using only visual clues __________________________________________________________________________________________ GS F 2682 : 2007Ψ 75. and desirable features for oil spill response boom slide connections __________________________________________________________________________________________ GS F 2464 : 2005Ψ Published by GSA in 2011 Standard Guide for Cleaning of Various Oiled Shorelines and Habitats 75.020 8 Pages Gr. 1 The standard covers performance criteria.020 Published by GSA in 2011 Standard Specification for Oil Spill Response Boom Connection : Slide Connector 7 Pages Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 2438 : 2004Ψ 75. material characteristics. __________________________________________________________________________________________ GS F 2533 : 2007Ψ Published by GSA in 2011 Standard Guide for In-Situ burning of Oil in Ship or other Vessels 75. and essential features for oil spill dispersant application systems __________________________________________________________________________________________ GS F 2532 : 2006Ψ 75. 2 The standard covers the use of in-situ burning directly in ships and other vessels __________________________________________________________________________________________ GS F 2534 : 2006Ψ Published by GSA in 2011 Standard Guide for Visually Estimating Oil Spill Thickness on Water 75. 1 Fishery Products Regulations 228 Pages (Subsidiary Legislations) Gr 23 This Standard specifies the national regulations and requirements for fish producers. processors and exporters for fresh.120. 1 : 2011 67. dielectric tests with impulse voltage.020 Published by GSA in 2011 Standard Test Method for Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems 10 Pages Gr. dielectric test with alternating voltage. It also specifies the national regulations and requirements for fishing vessels and fish processing establishments. 1 Fisheries Product Regulation ( Subsidiary Legislation) 1 Page Amendment 1: Monitoring Plan for Heavy Metals Gr. 1 AMENDMENT __________________________________________________________________________________________ GS FPR 1 : 2007Ψ 67. smoked and canned fish.080 131 Pages Applicable to dielectric tests with direct voltage.Part 12 : Starting Performance of Single-Speed ThreePhase Cage Induction Motors 24 Pages Gr.30 Ed. 3 This standard specifies the parameters for four designs of starting performance of single . __________________________________________________________________________________________ GS IEC 60060-1 : 1989Ψ Published by GSA in 2005 High Voltage Test Techniques Part 1. __________________________________________________________________________________________ GS IEC 60034-26 : 2006Ψ 29.increased safety with temperature classes T 1 t0 T3 .Part 26: Effects of Unbalanced Voltages on the 20 Pages Performance of Three-Phase Cage Induction Motors Gr 2 This standard describes the effects of unbalanced voltages on the performance of three-phase cage induction motors. tests with combinations of the above __________________________________________________________________________________________ 87 .30 Published by GSA in 2007 Rotating Electrical Machines . frozen.phase 50 Hz or 60 Hz cage induction motors.160 Published by GSA in 2008 Rotating Electrical Machines . __________________________________________________________________________________________ GS IEC 60034-12 : 2007Ψ 29.30 Ed. It also applies to dual voltage motors provided that the flux saturation level is the same for both voltages and to motors having type of protection e .General Definitions and Test Requirements 19. 1 This standard test method defines a method and measurement criteria to quantify the nameplate recovery rate ( capacity) of a stationary skimmer system in ideal conditions __________________________________________________________________________________________ GS FPR 1 : 2007/AMD.speed three .120. __________________________________________________________________________________________ GS IEC 60051-1 : 1997Ψ 17 220.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS F 2709 : 2008Ψ 75.20 Published by GSA in 2005 Direct Acting Indicating Analogue Electrical Measuring Instruments and their 81 Pages Accessories Part 1: Definitions and General Requirements Common to all Parts It applies to direct acting indicating electrical measuring instruments having an analogue display.160. 040 12 Pages To access the effects on a specimen of simple standard tests intended to be representative of the fall likely to be experienced during rough handling. test methods.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60068-2-32 : 1975 Amd.220. markings. __________________________________________________________________________________________ GS IEC 60086-1 : 2000Ψ Published by GSA in 2005 Primary Batteries .040.Part 1: General 29.220. dimensions. terminal configurations. safety and environmental aspects __________________________________________________________________________________________ GS IEC 60086-2 : 2001 Amd 1 : 2001Ψ Published by GSA in 2005 Primary Batteries .c systems having a highest voltage for equipment above 1kv.10 50 Pages Applicable to primary batteries based on standardized electrochemical systems __________________________________________________________________________________________ GS IEC 60086-2 : 2001Ψ Published by GSA in 2005 Primary Batteries .040 11 Pages To access the effects on a specimen of simple standard tests intended to be representative of the fall likely to be experienced during rough handling.10 50 Pages Applicable to primary batteries based on standardized electrochemical systems __________________________________________________________________________________________ 88 .Part 3: Small Built-in 3 Pages motorsFlange Numbers BF 10 to BF50 Gr 1 This standard applies to small built-in motors such as those usually intended for use in control devices. for the purpose of assessing safety requirements __________________________________________________________________________________________ GS IEC 60071-1 : 1993Ψ Published by GSA in 2005 Insulation Co-ordination .220. __________________________________________________________________________________________ GS IEC 60072-3 : 1994Ψ 29. 2Ψ Published by GSA in 2006 Basic Environmental Testing Procedures . 39.Part 2 : Tests -Test Ed: Free Fall 19. typical performance. or to demonstrate a minimum degree of robustness. for the purpose of assessing safety requirements __________________________________________________________________________________________ GS IEC 60068-2-32 : 1975Ψ Published by GSA in 2005 Basic Environmental Testing Procedures .Part 1: Definitions.160 Published by GSA in 2008 Dimensions and Output Series for Rotating Electrical Machines .Part 2 : Tests -Test Ed: Free Fall 19. nomenclature.Part 2: Physical and Electrical Specifications 29.10 46 Pages Standardizes primary batteries with respect to their electrochemical system.10. Principles and Rules 29. or to demonstrate a minimum degree of robustness.Part 2: Physical and Electrical Specifications 29.080 47 Pages Applies to three-phase a. 10.01 Published by GSA in 2005 Method for the Determination of the Proof and the Comparative Tracking Indices of 41 Pages Solid Insulating Materials Specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltages __________________________________________________________________________________________ GS IEC 60120 : 1984Ψ Published by GSA in 2005 Dimensions of Ball and Socket Couplings of String Insulator Units 29.29.035.10 14 Pages This standard is applicable to lead-acid batteries used for starting.220.080. designation.10 Published by GSA in 2005 Lead .220.040. Annex A describes two series of lead-acid starter batteries for heavy trucks.38.040. In several cases. a list of test method is given.43.040.040.10 33 Pages This standard applies to string insulators units of the cap and pin and long rod types and their associated metal fittings __________________________________________________________________________________________ 89 .10 Published by GSA in 2006 Lead-acid Starter Batteries – Part 4: Dimensions of Batteries for Heavy Trucks 16 Pages This standard is applicable to lead-acid batteries used for starting. __________________________________________________________________________________________ GS IEC 60086-4 : 2000Ψ Published by GSA in 2005 Primary Batteries .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60086-3 : 2004Ψ Published by GSA in 2005 Primary Batteries . widely and predominantly being used in North America and the East Asia region.20: 43.10 33 Pages Specifies tests and requirements for primary lithium batteries to ensure their safe operation under intended use and reasonably foreseeable misuse.22.Acid Starter Batteries .220.Part 1: General Requirements and Methods of Test 41 Pages Is applicable to lead-acid batteries with a nominal of 12v. lighting and igniting of heavy trucks __________________________________________________________________________________________ GS IEC 60095-4 : 1996 Amd.Part 3: Watch Batteries 29. methods of tests and requirements for primary batteries for watches.10 47 Pages This standard specifies dimensions.020: 43.220. __________________________________________________________________________________________ GS IEC 60095-1 : 2000Ψ 29. 1Ψ Published by GSA in 2006 Lead-acid Starter Batteries – Part 4: Dimensions of Batteries for Heavy Trucks 29. lighting and igniting of heavy trucks.20. used primarily as a power source for the starting and igniting of internal combustion engines __________________________________________________________________________________________ GS IEC 60095-4 : 1989Ψ 29.Part 4: Safety of Lithium Batteries 29. __________________________________________________________________________________________ GS IEC 60112 : 2003Ψ 19.080. 1Ψ Published by GSA in 2007 29.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60141-1 : 1995 Amd 1Ψ Published by GSA in 2008 Tests on Oil Filled and Gas-Pressure Cables and their Accessories Part 1: Oil-filled.Filled and Gas .20 Tests on Oil-Filled and Gas-Pressure Cables and their Accessories.1Ψ Published by GSA in 2007 29.Part 3: External Gas . __________________________________________________________________________________________ GS IEC 60168 : 2001Ψ 29.060. __________________________________________________________________________________________ GS IEC 60141-3 : 1967 Amd. i. paper-insulated.200. Paper10 Pages Insulated.Pressure Cables and their Accessories . 29.060.080.20 29. a gas pressure exceeding 12 kg/cm gauge is applied internally. during normal operation.insulated cables and accessories in which.Pressure (gas compression) Cables and Accessories for Alternating Voltages up to 275 kV 3 pages Gr.Filled Pipe-Type cables and Accessories for Alternating Voltages up to and including 400kV Gr.Pressure Cables and Accessories for Alternating Voltages up to 275 kV 25 Pages Gr.060.Part 2: Internal Gas .General Requirements and Line Commuted Converters Part 1 . Metal Sheathed Cables and Accessories for Alternating Voltages up to and including 400 Kv Gr 1 Amendment __________________________________________________________________________________________ GS IEC 60141-2 : 1963Ψ Published by GSA in 2007 29. 3 This standard applies to tests on radial .Pressure Cables and their Accessories .Pressure Cables and their Accessories . 1 __________________________________________________________________________________________ GS IEC 60146.1: Specification for Basic Requirements 92 Pages This standard specifies the requirements for the performance of all semiconductor power converters and semiconductor power switches using controllable and/or non-controllable electronic valve devices.1-1 : 2009Ψ 29.field impregnated . with the gas in direct contact with the insulation.20 Test on Oil.Oil-Filled. __________________________________________________________________________________________ 90 . metal-sheathed cables and accessories for alternating voltages up to and 2 Pages including 400kv Gr 1 Amendment __________________________________________________________________________________________ GS IEC 60141-1 : 1998 Amd 2Ψ Published by GSA in 2008 29.20 Test on Oil. 1 __________________________________________________________________________________________ GS IEC 60141-4 : 1990 Amd.Filled and Gas .Filled and Gas .e.20 Test on Oil.10 Published by GSA in 2005 Tests on Indoor and Outdoor Posts Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater than 1 000 v 91 Pages Applicable to post insulators and post insulators units of ceramic material or glass. for indoor and outdoor use in electrical installations.paper .045 Published by GSA in 2010 Semiconductor Converters .Part 4: Oil5 pages Impregnated Paper-Insulated High Pressure Oil.060.060. 060.060.20 Published by GSA in 2008 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 v 39 Pages Part 1: General Requirement This standard applies to rigid and flexible cables with insulation.20 Published by GSA in 2005 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 v33 Pages Part 3: Non .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60173 : 1964Ψ Published by GSA in 2006 Colours of the Cores of Flexible Cables and Cords 29.Part 15 Pages 4: Sheathed Cables for Fixed Wiring Details the particular specification for light polyvinyl chloride sheathed cables of rated voltage of 300/500 V __________________________________________________________________________________________ GS IEC 60227-5 : 2003Ψ Published by GSA in 2005 29.Sheathed Cables for Fixed Wiring Give details of the particular specifications for polyvinyl chloride insulated single-core non-sheathed cables for fixed wiring of rated voltages up to and including 450/750 v __________________________________________________________________________________________ GS IEC 60227-4 : 1997Ψ Published by GSA in 2005 29. of rated voltages up to and including 300 / 500v __________________________________________________________________________________________ GS IEC 60227-6 : 2001Ψ 29.060. and sheath if any.of rated voltages U0/U up to and including 450/750v used in power installations of nominal voltage not exceeding 450/750 a.060. base on polyvinyl chloride.c __________________________________________________________________________________________ GS IEC 60227-2 : 2003Ψ 29.060.060.20 Published by GSA in 2005 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 v25 Pages Part 2 : Test Methods It specifies general requirements for the methods of carrying out tests on Polyvinyl Chloride Insulated Cables of rated voltages up to and including 450/750 V __________________________________________________________________________________________ GS IEC 60227-3 : 1997Ψ 29.20 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 v.20 Published by GSA in 2005 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 v39 Pages Part 6:Lift Cables and Cables for Flexible Connections Details the particular specifications for both circular and flat lift cables and cables for flexible connections __________________________________________________________________________________________ 91 .060. __________________________________________________________________________________________ GS IEC 60227-1 : 2007Ψ 29.20 10 Pages This recommendation applies to flexible cables and cords with not more than five cores.20 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 v43 Pages Part 5: Flexible Cables (Cords) Details the particular specifications for polyvinyl chloride insulated flexible cables(cord). __________________________________________________________________________________________ GS IEC 60305 : 1995Ψ 29.c.Part 4 .080.080.060. __________________________________________________________________________________________ GS IEC 60273 : 1990Ψ 29.060.20. and sheath if any.20 GS IEC 60245-1 : 2003Ψ Published by GSA in 2006 Rubber Insulated Cables . Requirements for numbers and sizes of wires and resistance values are also included.Cords and Flexible Cables Details the particular specifications for rubber insulated and braided cords and for rubber insulated and rubber or polychloroprene or other equivalent syntheticelastomer sheathed cords and flexible cables of rated voltages up to and including 450/750 V.Ceramic or Glass Insulator Units for A. 19. based on vulcanized rubber of rated voltages Uo/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V a.10 Published by GSA in 2005 Insulators for Overhead Lines with a Nominal Voltage above 1000 V .060. __________________________________________________________________________________________ GS IEC 60228 : 2004Ψ Published by GSA in 2006 Conductors of Insulated Cables 29.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 29.220.20. 25.Characteristics of Insulator Units of the Cap and Pin Type 11 Pages Applies to string insulator units of the cap and pin type with insulating parts of ceramic material or glass __________________________________________________________________________________________ 92 . Systems. __________________________________________________________________________________________ GS IEC 60270 : 2000Ψ Published by GSA in 2006 High-Voltage Test Techniques .10 Published by GSA in 2006 Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages 56 Pages Greater than 1000 V This standard applies to post insulators and post insulator units of ceramic material or glass intended for indoor or outdoor service.060.Part 1 58 Pages General Requirements Applies to rigid and flexible cables with insulation.20 GS IEC 60227-7 : 2003Ψ Published by GSA in 2005 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 v Part 7: Flexible Cables Screened and Unscreened with two or more Conductors 23 Pages Details the particular specifications for polyvinyl chloride insulated screened and unscreened control cables of rated voltages up to and including 300/500 V.20 46 Pages This standard specifies the nominal cross-sectional areas.5 mm2 to 2 500 mm2. components or systems when tested with alternating voltages up to 400 Hz or with direct voltage. __________________________________________________________________________________________ GS IEC 60245-4 : 2004Ψ 29.Partial Discharge Measurements 17. for conductors in electric power cables and cords of a wide range of types.Rated Voltages up to and including 450/750 V .080 108 Pages This International Standard is applicable to the measurement of partial discharges which occur in electrical apparatus.160. in the range 0. and to post insulators of organic material alternating current systems with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz.All cables should comply with the appropriate requirements given in IEC 60245-1 and the individual types of cables should each comply with the particular requirements of this part.20 Published by GSA in 2006 Rubber Insulated Cables – Rated Voltages up to and including 450/750 V .C. __________________________________________________________________________________________ 29. __________________________________________________________________________________________ GS IEC 60335-2-21 : 2004Ψ Published by GSA in 2005 Household and Similar Electrical Appliances .c.040.13. or a. their rated voltage being not more than 250v for single. __________________________________________________________________________________________ GS IEC 60311 : 2002Ψ 97.Method for Measuring Performance 49 Pages This standard applies to electric irons for household or similar use __________________________________________________________________________________________ GS IEC 60335-1 : 2004Ψ 97. __________________________________________________________________________________________ GS IEC 60335-2-12 : 2002Ψ Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances – Safety .040.. cable couplers and appliance couplers.c.Safety .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60309-1 : 2005Ψ 29.Safety .120 41 Pages It deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature. primarily intended for industrial use.39 Published by GSA in 2006 Plugs. for appliances when battery operated.Part 2-12: Particular requirements for warming plates and similar appliances 13.Part 1: General requirements 192 Pages This standard applies to plugs and socket-outlets.Part 2-21: Particular Requirements for Storage Water Heaters 91.120.65.Part 2-24: Particular Requirements for Refrigerating Appliances. __________________________________________________________________________________________ 93 . with a rated operating voltage not exceeding 690 V d. either indoors or outdoors. and 500 Hz a.Part 1: General requirements 290 Pages This standard deals with the safety of electrical appliances for household and similar purposes. their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.30 Published by GSA in 2008 Household and Similar Electrical Appliances .50 34 Pages This standard deals with the safety of electric warming plates. their rated voltage being not more than 250 V. 13. Socket-Outlets and Couplers for Industrial Purposes .Part 2-14: Particular requirements for kitchen machines 13.140.phase appliances and 480v for other appliances.50 64 Pages This standard deals with the safety of electric kitchen machines for household and similar purposes. __________________________________________________________________________________________ GS IEC 60335-2-24 : 2007Ψ 97.040.030. their rated voltage being not more than 250V for single phase appliances and 24V d.c.120: 97.c.120 Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances – Safety . warming trays and similar appliances intended to keep food or vessels __________________________________________________________________________________________ GS IEC 60335-2-14 : 2002Ψ Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances – Safety .120: 97.060 Published by GSA in 2005 Electric Irons for Household or Similar use . Ice-Cream Appliances and Ice-Makers 52 Pages Gr 6 This International Standard deals with the safety of the following appliances. and a rated current not exceeding 250 A. their rated voltage being not more than 250 V for single-phase motor-compressors and 480V for other motor-compressors. ovens and similar appliances for household use.Part 2-6:Particular requirements for stationary cooking ranges. their rated voltage being not more than 250V __________________________________________________________________________________________ GS IEC 60335-2-34 : 2002Ψ 97.120. __________________________________________________________________________________________ GS IEC 60335-2-34 : 2004 Amd 1: 2008Ψ 97.Safety .50 20 Pages Deals with the safety of electric instantaneous water heaters for household and similar purposes and intended for heating water below boiling temperature.Safety .97.20: 13.120 Published by GSA in 2005 Household and Similar Electrical Appliances . hobs.040. their protection and control systems. dishes. hobs. their rated voltage being not more than 250 V.Safety . with or without means for water heating or drying. 62 Pages including Combination Microwave Ovens This standard deals with the safety of microwave ovens for household use.40 74 Pages This standard deals with the safety of electrically operated dishwashing machines for washing plates.Safety . and 480 V for other appliances.Part 2-25: Particular Requirements for Microwave Ovens.Part 2-58: Particular requirements for commercial electric dishwashing machines 97. __________________________________________________________________________________________ GS IEC 60335-2-6 : 2005Ψ 13. their rated voltage being not morethan 250 V for single-phase appliances connected between one phase and neutral.060.Part 2-34: Particular 27 Pages Requirements for Motor-Compressors Gr 3 This standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors.040.20 Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances -Safety .30 Published by GSA in 2008 Household and Similar Electrical Appliances .040.040.Part 2-34: Particular 5 Pages Requirements for Motor-Compressors Gr 1 __________________________________________________________________________________________ GS IEC 60335-2-35 : 2002Ψ Published by GSA in 2005 Household and Similar Electrical Appliances .Safety .120 Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances . their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.Safety . their rated voltage being not more than 250v for single-phase appliances and 480v for other appliances. 13. __________________________________________________________________________________________ 94 . __________________________________________________________________________________________ GS IEC 60335-2-3 : 2005Ψ 97. not intended for household use.Part 2-35: Particular Requirements for Instantaneous Water Heaters 13. ovens and similar appliances 84 Pages This standard deals with the safety of stationary electric cooking ranges.040.30 Published by GSA in 2008 Household and Similar Electrical Appliances .Part 2-3: Particular Requirements 18 Pages for Electric Irons This standard deals with the safety of electric dry irons and steam irons including those with a separate water reservoir or boiler having a capacity not exceeding 51 for household and similar purposes.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60335-2-25 : 2005Ψ 97.040. It applies to motor-compressors tested separately under the most severe conditions that may be expected to occur in normal use.120: 97. __________________________________________________________________________________________ GS IEC 60335-2-58 : 2002Ψ Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances . cutlery and similar articles. glassware. 50.040.Part 4-41: Protection for Safety – Protection against Electric Shock 74 Pages Specifies essential requirements regarding protection against electric shock.260. 29. 29.Part 2-9: Particular Requirements for Grills.140.Part 2. including basic protection (protection against direct contact) and fault protection (protection against indirect contact) of persons and livestock. __________________________________________________________________________________________ GS IEC 60335-2-78 : 2002Ψ Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances -Safety . 13. 91.140.060. It deals also with the application and co-ordination of these requirements in relation to external influences.80: Particular 14 Pages Requirements for Fans Deals with the safety of electric fans for household and similar purposes. __________________________________________________________________________________________ GS IEC 60364-4-41 : 2005Ψ 13. that are intended for washing clothes and textiles.Solar Photovoltaic (PV) Power Supply Systems Gr 2 This particular requirement apply to the electrical installations of pv power supply systems including systems with AC modules __________________________________________________________________________________________ GS IEC 60372 : 1984Ψ 17. __________________________________________________________________________________________ GS IEC 60335-2-80 : 2004Ψ 23. __________________________________________________________________________________________ GS IEC 60364-7-712 : 2002Ψ 27.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 97.Part 7-712: Requirements for Special Installations or 11 Pages Locations.99 Published by GSA in 2006 Locking Devices for Ball and Socket Couplings of String Insulator Units – Dimensions and tests 30 Pages This standard is applicable to locking devices used with ball and socket couplings of string insulator units and used with corresponding metal fittings __________________________________________________________________________________________ 95 .160.120.Safety . Toasters and Similar Portable Cooking Appliances 74 Pages This standard deals with the safety of electric portable appliances for household purposes that have a cooking function such as baking.50 Published by GSA in 2008 Electrical Installation of Buildings.Safety .Part 2-7: Particular Requirements for Washing Machines 58 Pages This standard deals with the safety of electric washing machines for household and similar use.91. their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. their rated voltage being not more than 250v for single-phase appliances and 480v for other appliances.99.220.020.Safety .Part 2-78: Particular Requirements for Outdoor Barbecues 13.180 34 Pages This standard deals with the safety of outdoor barbecues for household and similar use. 13.120 Published by GSA in 2005 Household and Similar Electrical Appliances .50 Published by GSA in 2006 Low-Voltage Electrical Installations . their rated voltage being not more than 250 V.120 Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances . __________________________________________________________________________________________ GS IEC 60335-2-9 : 2006Ψ 97. 91.120 GS IEC 60335-2-7 : 2004Ψ Replaces GS 2:1969 (Pub by GSA in 2006) Household and Similar Electrical Appliances .035. their ratedvoltage being not more than 250 V. roasting and grilling. c overhead power lines and overhead traction lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. 31.99.C SystemsCharacteristics of Insulator Units of the Long Rod Type The standard is applicable to string insulator units of the long rod type with insulating parts of ceramic material intended for use in a. at other frequencies between 0.240.080.5 MHz and 2 MHz.10 Published by GSA in 2005 Insulators for Overhead Lines with a Nominal Voltage above 1000 V .080.080.020. __________________________________________________________________________________________ GS IEC 60433 : 1998Ψ 29.20 Published by GSA in 2006 Locking Devices for Ball and Socket Couplings of String Insulator Units – Dimensions and 8 Pages Tests This standard is applicable to locking devices used with ball and socket couplings of string insulator units and used with corresponding metal fittings __________________________________________________________________________________________ GS IEC 60383-1 : 1993Ψ 29. __________________________________________________________________________________________ GS IEC 60383-2 : 1993Ψ 29.99 Published by GSA in 2006 Locking Devices for Ball and Socket Couplings of String Insulator Units – Dimensions and Tests 8 Pages This standard is applicable to locking devices used with ball and socket couplings of string insulator units and used with corresponding metal fittings __________________________________________________________________________________________ GS IEC 60372 : 2003 Amd 2Ψ 29. alternatively. Test Methods and Acceptance 111 Pages Criteria It applies to insulators of ceramic material or glass for use on a. Test Methods and Acceptance Criteria It applies to insulator strings and insulator sets comprising string insulator units of ceramic material or glass for use on a. __________________________________________________________________________________________ 96 .10 Published by GSA in 2005 Insulators for Overhead Lines with a Nominal Voltage above 1000 V .C Systems 23 Pages Definitions.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60372 : 1991 Amd.080.020 86 Pages This recommendation establishes sampling plans and procedures for inspection by attributes.Part 1: Ceramic or Glass Insulator Units for A. 1Ψ 17.Definitions.Ceramic Insulators 13 Pages for A.Part 2: Insulator Strings and Insulator sets for A.c overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz.035.10 Published by GSA in 2005 Insulators for Overhead Lines with a Nominal Voltage above 1000 V.C Systems.10. used in substations.c overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz __________________________________________________________________________________________ GS IEC 60410 : 1973Ψ Published by GSA in 2006 Sampling Plans and Procedures for Inspection by Attributes 21. 29.5 MHz or 1 MHz or.220.080. It is also applicable to insulators of similar design. __________________________________________________________________________________________ GS IEC 60437 : 1997Ψ Published by GSA in 2006 Radio Interference Test on High-voltage Insulators 29. 29.10 30 Pages This standard specifies the procedure for a radio interference (RI) test carried out in a laboratory on clean and dry insulators at a frequency of 0. 20 Published by GSA in 2006 Power Cables with Extruded Insulation and their Accessories for Rated Voltages from 1 166 Pages Kv (Um = 1.2 kV) up to 30 kV (Um = 36 kV) Specifies the construction.060.2 Kv) up to 30 Kv (Um = 36 Kv) Part 2 : Cables for rated voltages from 6 Kv (Um = 7. __________________________________________________________________________________________ GS IEC 60471 : 1980 Amd. dimensions and test requirements of power cables with extruded solid insulation from 6 kV up to 30 kV for fixed installations such as distribution networks or industrial installations.2 kV) up to 30 kV (Um = 36 kV) Part 1: Cables for Rated Voltages of 1 kV 124 Pages ((Um = 1. on a. __________________________________________________________________________________________ GS IEC 60471 : 1977Ψ Published by GSA in 2006 Dimensions of Clevis and Tongue Couplings of String Insulator Units 29. 1Ψ Published by GSA in 2006 Dimensions of Clevis and Tongue Couplings of String Insulator Units 29.10 Published by GSA in 2005 Artificial Pollution Tests on High-Voltage Insulators to be used on A. __________________________________________________________________________________________ GS IEC 60502-2 : 2005Ψ 29.6 kV) Specifies the construction.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60442 : 2003Ψ 97.Methods for Measuring the Performance 34 Pages This standard applies to electric toasters for household and similar use.040. The purpose of this standard is to state and define the main performance characteristics for toasters.C Systems 56 Pages This standard is applicable for the determination of the power frequency withstand characteristics of ceramic and glass insulators to be used outdoors and exposed to polluted atmosphere.6 kV) for fixed installations such as distribution networks or industrial installations.060.080.20 2 Pages This standard applies to string insulator units of the cap and pin type and alos of the long rod type as well as fittings used with such insulators. __________________________________________________________________________________________ GS IEC 60507 : 1991Ψ 29.060. dimensions and test requirements of power cables with extruded solid insulation for rated voltages of 1 kV (Um = 1.50 Published by GSA in 2006 Electric Toasters for Household and Similar Purposes . which are of interest to the user.2 kV) and 3 kV (Um = 3.2 kV) and 3 kV (Um = 3. to describe the standard methods for measuring these characteristics and to give some guidelines for the evaluation of test results. __________________________________________________________________________________________ GS IEC 60456 : 2003Ψ Published by GSA in 2006 Clothes Washing Machines for Household Use – Methods for Measuring the Performance 97. with or without heating devices and for cold and/or hot water supply.060 194 Pages This standard deals with methods for measuring the performance of clothes washing machines for household use. It also deals with appliances for water extraction by centrifugal force and is applicable to appliances for both washing and drying textiles (called washer-dryers) with respect to their washing performance.060.20 14 Pages This standard applies to string insulator units of the cap and pin type and also of the long rod type as well as fittings used with such insulators.20 Published by GSA in 2006 Power Cables with Extruded Insulation and their Accessories for Rated Voltages from 1 kV (Um = 1.c systems with the highest voltage of the system ranging from 1000 V up to 765 kV __________________________________________________________________________________________ 97 . __________________________________________________________________________________________ GS IEC 60502-1 : 2004Ψ 29. 40 Published by GSA in 2006 Switches for Household and Similar Fixed-Electrical Installations . and provides tables classifying the various material types into groups according to compositional types. __________________________________________________________________________________________ GS IEC 60672-1 : 1995Ψ 29.080.Part 1: Definitions and Classification 34 Pages This standard is applicable to ceramic. __________________________________________________________________________________________ GS IEC 60669-1 : 2000Ψ 29. using a liquid contaminant and inclined plane specimens.01 Published by GSA in 2005 Test Methods for Evaluating Resistance to Tracking and Erosion of Electrical Insulating 19 Pages Materials used under Severe Ambient Conditions This standards describes two test methods for the evaluation of electrical insulating materials for use under severe and ambient conditions at power frequencies( 48 Hz to 62 Hz) by measurement of resistance to tracking and erosion.260.Part 1:General 196 Pages Requirements Applies to manually operated general purpose switches.30 Published by GSA in 2006 Ceramic and Glass -Insulating Materials .220. property attributes and applications. __________________________________________________________________________________________ GS IEC 60669-2-1 : 2002Ψ 29. only with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A.99. __________________________________________________________________________________________ GS IEC 60660 : 1999Ψ 29. 29.10 Published by GSA in 2005 Insulators .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 97. It gives definitions of terms used.Test on Indoor Post Insulators of Organic Material for Systems with Nominal Voltages greater than 1000 V up to but not including 300 kV 51 Pages It is applicable to post insulators of organic material for indoor service in electrical installations or equipment operating in air at atmospheric pressure on alternating current with a nominal voltage greater than 1000 v up to. __________________________________________________________________________________________ 98 . glass-mica and glass materials for electrical insulating purposes.Part 2-1:Particular requirements – Electronic Switches 94 Pages This standard applies to electronic switches and to associated electronic extension units for household and similar fixed electrical installations either indoors or outdoors.120.020 100 Pages This standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72. for a.40 Published by GSA in 2006 Switches for Household and Similar Fixed Electrical Installations .035. intended for household and similar fixed-electrical installations. but not including. __________________________________________________________________________________________ GS IEC 60529 : 2001Ψ Published by GSA in 2006 Degrees of Protection provided by Enclosures (IP Code) 13.c. either indoors or outdoors. 300 kV.120. 29. glass-ceramic.060 GS IEC 60508 : 1975Ψ Published by GSA in 2006 Methods for Measuring the Performance of Electric Ironing Machines for Household and Similar Purposes 30 Pages The standard applies to electric ironing machines for household and similar purposes. __________________________________________________________________________________________ GS IEC 60587 : 1984Ψ 17.035.5 kV. products for fire hazard testing __________________________________________________________________________________________ GS IEC 60695-2-12 : 2000Ψ 13.020 Published by GSA in 2005 Fire Hazard Testing . designed for indoor and outdoor installation and for operation at service frequencies up to and including 60 Hz on systems having voltages above 1 000 V. for guidance.Glow 29 Pages Wire Apparatus and Common Test Procedure It specifies the glow-wire apparatus and common test procedure to stimulate the effect of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors. __________________________________________________________________________________________ GS IEC 60695-11-10 : 2003Ψ 13. glass-mica and glass materials for electrical insulating purposes.Part 2-11 : Glowing / Hot .30 GS IEC 60672-3 : 1997Ψ Published by GSA in 2006 Ceramic and Glass -Insulating Materials .Glow 13 Pages Wire Ignitability Test Method for Materials It specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature(GWIT) __________________________________________________________________________________________ 99 .Wire Based Test Methods .40.Wire Based Test Methods .40. in order to assess the fire hazard by simulation technique.020 Published by GSA in 2005 Fire Hazard Testing .Products 17 Pages Specifies the details of the glow .40.40.220. __________________________________________________________________________________________ GS IEC 60694 : 2002Ψ 29.c.50 W Horizontal and Vertical Flame 51 Pages Test Methods It specifies a small scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials.Part 2-13 : Glowing / Hot .220. a classification of materials for general electrical insulating purposes.wire test to be applied to end .220.035.Wire Based Test Methods . and indicates typical numerical values for the characteristics relevant to each subgroup or type of material. glass-ceramic. exposed to a small flame ignition source of 50 W nominal power __________________________________________________________________________________________ GS IEC 60695-2-10 : 2000Ψ 13. __________________________________________________________________________________________ GS IEC 60695-2-11 : 2000Ψ 13.020 Published by GSA in 2005 Fire Hazard Testing . 020 Published by GSA in 2005 Fire Hazard Testing .Glow Wire Flammability Test Method for Materials 13 Pages It specifies the details if glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for flammability testing to determine the glow-wire flammability index(GWFI) __________________________________________________________________________________________ GS IEC 60695-2-13 : 2000Ψ 13. 29. It provides.40.Part 2-12 : Glowing / Hot . 29.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 29. 29.130. switchgear and control gear.Part 11-10 : Test Flames .Part 2-10 : Glowing / Hot .Part 3: Specifications for Individual Materials 40 Pages This standard is applicable to ceramic. for short periods.Wire Based Test Methods .220. 29.220. 29.10 Published by GSA in 2006 Common Specifications for High-Voltage Switchgear and Control gear Standards 234 Pages This standard applies to a.020 Published by GSA in 2005 Fire Hazard Testing .Glow Wire Flammability Test Method for End . 6 kV) This standard gives guidance on the short-circuit maximum temperature limits of electric cables having rated voltages of 1 kV ( Um = 1.060.2 Kv) and 3 kV ( Um = 3. when required. __________________________________________________________________________________________ GS IEC 60720 : 1981Ψ Published by GSA in 2005 Characteristics of Lime Post Insulators 29.6 kV).060.120 Published by GSA in 2008 Automatic Electrical Controls for Household and similar use .– oversheath and bedding materials.20 Published by GSA in 2006 Mineral Insulated Cables and their Terminations with a Rated Voltage not Exceeding 750 26 Pages V Part 2: Terminations Specifies requirements for terminations for use with mineral insulated cables complying with the requirements of IEC 60702-1. Provision is made for a corrosion-resistant extruded outer covering over the copper sheath. __________________________________________________________________________________________ GS IEC 60730-2-10 : 2006Ψ 97.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60702-1 : 2002Ψ 29.20 Published by GSA in 2006 Mineral Insulated Cables and their Terminations with a Rated Voltage not Exceeding 750 V –Part 1: Cables 54 Pages This standard applies to mineral insulated general wiring cables with copper or copper alloy sheath and copper conductors and with rated voltages of 500 V and 750 V.2 kV) and 3 kV ( Um = 3. __________________________________________________________________________________________ GS IEC 60719 : 1992Ψ 29.10 15 Pages It applies to post insulators with insulating parts of ceramic material intended for a.Part 2-10: Particular 11 Pages Requirements for motor-Starting Relays Gr 2 __________________________________________________________________________________________ GS IEC 60797 : 1984Ψ 29. __________________________________________________________________________________________ GS IEC 60702-2 : 2002Ψ 29.10 Published by GSA in 2005 Residual Strength of String Insulator Units of Glass or Ceramic Material for Overhead Lines after Mechanical damage of the Dielectric 15 Pages It applies to string insulator units of the cap and pin type with insulating parts of toughened glass or ceramic material __________________________________________________________________________________________ 100 .c overhead lines with a nominal voltage higher than 1000 V and frequency not higher than 100 Hz __________________________________________________________________________________________ GS IEC 60724 : 2000Ψ 29.20 Published by GSA in 2006 Short-Circuit Temperature Limits of Electric Cables with Rated Voltages of 1 Kv ( Um = 26 Pages 1.080.060.20 Published by GSA in 2006 Calculation of the Lower and Upper Limits for the Average Outer Dimensions of Cables with Circular Copper Conductors and of Rated Voltages up to and including 450/750 V 18 Pages This standard specifies a method for calculation of the lower and upper limits for the average outer diameter of cables and the outer dimensions of flat cords with circular copper conductors and of rated voltages up to and including 450/750 V. with regard to the following: – insulating materials.– conductor and metallic sheath materials and methods of connection.080.060. CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60811-1-1 : 2001Ψ 29.3: General Application . __________________________________________________________________________________________ GS IEC 60811-1-3 : 2001Ψ 29. 29. and in offshore applications __________________________________________________________________________________________ GS IEC 60811-1-2 : 1985Ψ 29.Shrinkage Test It specifies test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships in offshore applications. __________________________________________________________________________________________ 101 . 1Ψ 29.035.Part 28 Pages 1-2: Methods for General Application – Thermal Ageing Methods This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunications including cables used on ships. 1Ψ 29.060.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables .20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables . __________________________________________________________________________________________ GS IEC 60811-1-2 : 2000 Amd.01. 29.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables . This Section four of part 1 gives the methods for tests at low temperature which apply to PVC and PE compounds.Part 14 Pages 1-2: Methods for General Application – Thermal Ageing Methods This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships.01.20.Test for Determining the Mechanical Properties 45 Pages It specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunications including cables used on ships.035. 2Ψ 29.060.Part 1.Measurement of Thickness and Overall Dimensions . 29. 29.20 Published by GSA in 2005 Common Test Methods for Insulating and Sheathing Materials of Electric Cables and Optical Cables .Part 1-4: Methods for General Application – Test at Low Temperature 34 Pages This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships.01. __________________________________________________________________________________________ GS IEC 60811-1-4 : 1985Ψ 29.035.20 Published by GSA in 2006 Common Test Methods for Sheathing Materials of Electric and Optical Cables – Part 12: Methods for General Application Thermal Ageing Methods 12 Pages This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships and in offshore applications.01.060.01 Published by GSA in 2005 Common Test Methods for Insulating and Sheathing Materials of Electric Cables and 23 Pages Optical Cables . __________________________________________________________________________________________ GS IEC 60811-1-2 : 1989 Amd.060.035. __________________________________________________________________________________________ GS IEC 60811-1-4 : 1993 Amd.060. 29. 29.Methods for Determining the Density Water Absorption Tests .20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables .035.Part 1-1: Methods for General Application .035.060.Part 1-4: Methods for General Application – Test at Low Temperature 4 Pages This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships.060.01. 20.Part 32 Pages 3-1: Methods Specific to PVC Compounds – Pressure Test at High Temperature – Tests for Resistance to Cracking This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships.060.060. __________________________________________________________________________________________ GS IEC 60811-3-1 : 2001 Amd. 29. 29. GS IEC 60811-3-2 : 2003 Amd.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables .01.060. 1Ψ 29.Part 28 Pages 3-2: Methods Specific to PVC Compounds – Loss of Mass Test – Thermal Stability Test The standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used in ships. __________________________________________________________________________________________ GS IEC 60811-31 : 1985 Amd.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60811-1-4 : 2001 Amd. This section one of part 3 gives the methods for pressure test at high temperature and for tests resistance to cracking which apply to PVC compounds.060.035.01.035. 2Ψ 29.035. __________________________________________________________________________________________ 102 . 2Ψ 29.20. 1Ψ 29. 29.060. 29.Part 6 Pages 3-2: Methods Specific to PVC Compounds – Loss of Mass Test –Thermal Stability Test This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships. __________________________________________________________________________________________ GS IEC 60811-3-2 : 1985Ψ 29.060.035.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables . 2Ψ 29.20.20.060.035. 29.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables . 29.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric Cables . This section gives the methods for loss of mass test and thermal stability test which apply to PVC compounds __________________________________________________________________________________________ GS IEC 60811-3-2 : 1993 Amd.035. 29. __________________________________________________________________________________________ GS IEC 60811-3-1 : 1985Ψ 29.Part 4 Pages 3-1: Methods Specific to PVC Compounds – Pressure test at high temperature – Tests for resistance to cracking This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships.10. including cables used in ships and in offshore applications.035.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical 6 Pages Cables Part 1-4: Methods for General Application Test at Low Temperature This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships and in offshore applications.20 Published by GSA in 2006 Insulating and Sheathing Materials of Electric and Optical Cables – Common Test 6 Pages Methods Part 3-2: Methods Specific to PVC Compounds – Loss of Mass Test – Thermal Stability Test This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric and optical cables for power distribution and telecommunications.20 Published by GSA in 2006 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables Part 3-1: Methods Specific to PVC Compounds – Pressure Test at High 8 Pages Temperature – Tests for Resistance to Cracking This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric cables for power distribution and telecommunication including cables used on ships and in offshore applications. with or without earthing contact.c.30 Published by GSA in 2006 Plugs and Socket-Outlets for Household and Similar Purposes .Outlets for Appliances 27 Pages This standard applies to socket -outlets integrated or intended to be incorporated in or fixed to appliances( hereinafter referred to socket-outlets for appliances) __________________________________________________________________________________________ GS IEC 60884-2-3 : 1989Ψ 29. It does not.Part 1: General 256 Pages Requirements This standard applies to plugs and fixed or portable socket-outlets for a.120.Part 2. either indoors or outdoors.120.1: Particular 15 Pages Requirements for Fused Plugs This standard applies where fuses are primarily intended to protect the flexible cable or cord(e.30 Published by GSA in 2005 Plugs and Socket-Outlets for Household and Similar Purposes .Calculation of Effects . 29. fused and non-fused adaptors for a. __________________________________________________________________________________________ 103 .Part 2-5: Particular 37 Pages Requirements for Adaptors It applies to shuttered and non-shuttered. however. with a rated voltage not exceeding 440 V and a rated current not exceeding 32 a.c.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60815 : 1986Ψ 29.2: Particular Requirements for Socket . __________________________________________________________________________________________ GS IEC 60884-2-1 : 1987Ψ 29.01.080.120.240. with or without earthing contact.30 Published by GSA in 2005 Plugs and Socket-Outlets for Household and Similar Purposes .30 Published by GSA in 2006 Plugs and Socket-Outlets for Household and Similar Purposes .Part 2-3: Particular 36 Pages requirements for switched socket-outlets without interlock for fixed installations This standard applies to fixed switched-outlets for a. change the basis for the standardized procedures given in that publication __________________________________________________________________________________________ GS IEC 60884-1 : 2002Ψ 29.Part 2.220.Thus this report is an addition to IEC 865-1. __________________________________________________________________________________________ GS IEC 60865-2 : 1994Ψ 17.Examples of Calculation 81 Pages It is to show the application of procedures for the calculation of mechanical and thermal effects due to short circuits as presented in IEC 865-1. with a rated voltage greater than 50 V but not exceeding 440 Vand a rated current not exceeding 32 A.120. only. intended for household and similar purposes. intended for household and similar purposes.c only. only.10 Published by GSA in 2006 Guide for the Selection of Insulators in Respect of Polluted Conditions 44 Pages This guide is mainly applicable to three-phase systems up to 525 kV (phase-to-phase).g with ring circuit) The fuses are not intended to protect appliances or parts of them against overload.Part 2. For higher voltages the possible non-linear performance of insulators is still under study. __________________________________________________________________________________________ GS IEC 60884-2-2 : 1989Ψ 29.120. __________________________________________________________________________________________ GS IEC 60884-2-5 : 1995Ψ 29. either indoors or outdoors.20 Published by GSA in 2005 Short-Circuit Currents .30 Published by GSA in 2005 Plugs and Socket-Outlets for Household and Similar Purposes . 2 : 2007Ψ Published by GSA in 2008 Photovoltaic Devices.1 : 2006Ψ Published by GSA in 2008 Measurement of Photovoltaic Current .V 14 pages characteristics of Crystalline Silicon Photovoltaic Devices Gr.Requirements for Reference Solar Cells 27.Drawn Aluminum Wire for Overhead Line Conductors 29.160 22 Pages Gr 2 Amendment __________________________________________________________________________________________ GS IEC 60904 . __________________________________________________________________________________________ GS IEC 60891 : 1992 AMD 1Ψ Published by GSA in 2010 27.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60884-2-6 : 1997Ψ 29. with rated voltage above 50 V but not exceeding 440 V and a rated current not exceeding 32 A. either indoors or outdoors.20 9 Pages It applies to hard-drawn aluminum wires for the manufacture of stranded conductors for overhead power transmission purposes. calibration and care of reference solar devices __________________________________________________________________________________________ 104 .160 Procedure for Temperature and Irradiance Corrections to Measured 1. intended for household and similar purposes.V Characteristics of Crystalline Silicon Photovoltaic Devices __________________________________________________________________________________________ GS IEC 60904 . for fixed electrical installations. 2 This standard describes the procedures for temperature and irradiance corrections to the measured 1.20 Published by GSA in 2005 Electrical Test Methods for Electric Cables . Cords. cords and cables in case the relevant cable standard does not prescribe a different electrical test method. internal series resistance and curve correction factor.240.c. __________________________________________________________________________________________ GS IEC 60889 : 1987Ψ Published by GSA in 2005 Hard . marking. selection.V characteristics of crystalline silicon photovoltaic devices. It specifies the mechanical and electrical properties of wires in the diameter range 1.Voltage Characteristics 27.120. with or without earthing contact. It includes procedures for the determination of temperature coefficients.160 24 Pages Gr 3 This standard gives requirements for the classification.Part 2-6: Particular Requirements for Switched Socket-Outlets with Interlock for Fixed Electrical Installations 40 Pages Applies to switched socket-outlets with interlock for a. 9 Pages and Wires for Voltages up to and including 450/750 V The electrical test methods described in this standard are given as a guide to be followed for testing wires.00mm __________________________________________________________________________________________ GS IEC 60891 : 1987Ψ 27.060. only.Part 1: Electrical Tests for Cables. __________________________________________________________________________________________ GS IEC 60885-1 : 1987Ψ 29. packaging.160 Published by GSA in 2007 Procedures for Temperature and Irradiance Corrections to Measured 1.30 Published by GSA in 2006 Plugs and Socket-Outlets for Household and Similar Purposes .25mm to 5. 30 Published by GSA in 2006 IEC System of Plugs and Socket-Outlets for Household and Similar Purposes -Part 1: Plugs and Socket-Outlets 16 A 250 V a.c.120.Part 10 : Methods of Linearity Measurement 27. The purpose of this standard is to define classifications of solar simulators for use in indoor measurements of terrestrial photovoltaic devices.Part 3: Measurement Principles for Terrestrial Photovoltaic (PV) Solar Devices with Reference Spectral Irradiance Data 11 Pages Gr 1 This standard applies to the following crystalline silicon photovoltaic devices for terrestrial applications: (a)single solar cells with or without a protective cover (b)sub-assemblies of solar cells (c) flat modules It also describes the measurement principles and specifies the reference spectral irradiance distribution.160 Published by GSA in 2007 Photovoltaic Devices .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 60904 . 34 Pages This standard applies to the IEC system of plugs and socket-outlets rated 16 A 250 V a.9 : 2007Ψ Published by GSA in 2008 Photovoltaic Devices . __________________________________________________________________________________________ GS IEC 60906-1 : 1986Ψ 29.160 Published by GSA in 2008 Computation of Spectral Mismatch Error Introduced in the Testing of a Photovoltaic 6 Pages Device Gr 1 This standard describes the procedure for determining the error introduced in the testing of a photovoltaic device caused by the interaction of the mismatch between the spectral responses __________________________________________________________________________________________ GS IEC 60904 .. for household and similar purposes for the connection of equipment to distribution systems having nominal voltages between 200 V and 250 V a. modules and arrays of one type of module). It is primarily intended for use by calibration laboratories. __________________________________________________________________________________________ GS IEC 60904-10 : 1998Ψ Published by GSA in 2008 Photovoltaic Devices .c.8 : 1998Ψ Published by GSA in 2008 Measurement of Spectral Response of a Photovoltaic (PV) Device 27. __________________________________________________________________________________________ GS IEC 60904 .7 : 1998Ψ 27.Part 5: Determination of the Equivalent Cell Temperatuure 11Pages (ECT) of Photovoltaic (PV) Devices by the Open -Circuit Voltage Method Gr 2 This Standard describes the preferred method for determining the equivalent cell temperature (ECT) of PV devices (cells. determining NOCT and translating measured 1-V characteristics to other temperatures. insofar as dimensional requirements are concerned.for the purposes of comparing their thermal characteristics.160 Published by GSA in 2008 Photovoltaic Devices .160 15 Pages Gr 2 This standard require the use of specific classes of solar simulators deemed appropriate for specific tests.Part 9: Solar Simulator Performance Requirements 27.c. __________________________________________________________________________________________ 105 .3 : 1989Ψ 27. module manufacturers and system designers __________________________________________________________________________________________ GS IEC 60904-5 : 1993Ψ 27.160 13 Pages Gr 2 This standard describes procedures used to determine the degree of linearity of any photovoltaic device parameter with respect to a test parameter.160 16 Pages Gr 2 This standard gives guidance for the measurement of the relative spectral response of both linear and non-linear photovoltaic devices and also it is applicable to single-junction devices __________________________________________________________________________________________ GS IEC 60904 . 220.020 Published by GSA in 2006 Protection of Persons and Equipment by Enclosures .50 Published by GSA in 2006 Residual Current Operated Circuit-Breakers with Integral overcurrent protection for 280 Pages Household and Similar Uses (RCBOs) . __________________________________________________________________________________________ GS IEC 61009-2-1 : 1991Ψ 29. __________________________________________________________________________________________ GS IEC 61083-1 : 2001Ψ 17. __________________________________________________________________________________________ 106 . analogue oscilloscopes and peak voltmeters used for measurements during tests with high impulse voltages and high impulse currents.5 Kv to be used in Severe Climatic Conditions 44 Pages The report applies to indoor enclosed and control gear complying with IEC publications 298 and 466. Functional Characteristics -Methods of Test 33 Pages It specifies the general requirements.Regulated Types) . rated currents not exceeding 125 A and rated shot-circuit capacities not exceeding 25 000 A.20: 19.Part 1: General Rules This standard applies to residual current operated circuit-breakers with integral overcurrent protection functionally independent of. or functionally dependent on. for household and similar uses incorporating overcurrent protection having rated voltages not exceeding 440 V a. rated currents not exceeding 125 A and rated short-circuit capacities not exceeding 25 000 A for operation at 50 Hz or 60 Hz. c. 29.120. – protection of the equipment inside the enclosure against ingress of solid foreign objects.Part 1: 78 Pages Requirements for Instruments This standard is applicable to digital recorders. __________________________________________________________________________________________ GS IEC 61032 : 1997Ψ 13.Part 1: General Requirements.c.20 Published by GSA in 2005 General Purpose Lead . for rated voltages not exceeding 440 V a. It modifies the corresponding clauses in IEC 61009-1 to cover its applicability to RCBO's functionally dependent on line voltage.50 Published by GSA in 2005 Residual Current Operated Circuit-Breakers with Integral Overcurrent Protection for 7 Pages Household and Similar Uses(RCBO's) Part 2-1: Applicability of the General Rules to RCBO's Functionally Independent of Line Voltage It applies to residual current operated circuit operated circuit-breakers with integral overcurrent protection( RCBO's) functionally independent of line voltage. including digital oscilloscopes.260.120.130 GS IEC 60932 : 1988Ψ Published by GSA in 2006 Additional Requirements for Enclosed Switchgear and Control gear from 1 Kv to 72. for operation at 50 Hz or 60 Hz. excluding gas-insulated metal-enclosed switchgear. functional characteristics and methods of test forall general purpose lead-acid cells and batteries of valve-regulated type.. line voltage for household and similar uses (hereafter referred to as RCBOs). __________________________________________________________________________________________ GS IEC 61009-2-2 : 1991Ψ 29.220.50 Published by GSA in 2005 Residual Current Operated Circuit-Breakers with Integral Overcurrent Protection for Household and Similar Uses(RCBO's) 7 Pages Part 2-2: Applicability of the General Rules to RCBO's Functionally Dependent on Line Voltage.120. intended to be used in service conditions more sever with respect to condensation and pollution than the normal service conditions specified in those standards..Probes for Verification 60 Pages This standard specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure. __________________________________________________________________________________________ GS IEC 61056-1 : 2002Ψ 29.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 29. __________________________________________________________________________________________ GS IEC 61009-1 : 2003Ψ 29.080 Published by GSA in 2006 Instruments and Software used for Measurement in High-Voltage Impulse Tests .Acid Batteries(Valve . 20 14 Pages Gr 2 This standard supplements IEC 964 which applies to design for control rooms of nuclear power plants.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 61138 : 1994Ψ Published by GSA in 2006 Cables for Portable Earthen and Short-Circuiting Equipment 29. 1Ψ Published by GSA in 2006 Cables for Portable Earthen and Short-Circuiting Equipment 29.10 Published by GSA in 2005 Insulators of Ceramic Material or Glass for Overhead Lines with a Nominal Voltage greater than 1 000 V.Impulse Puncture Testing in Air.080.160 Published by GSA in 2007 Overvoltage Protection for Photovoltaic (PV) power generating systems .Guide for Seismic Qualification of High-Voltage Alternating Current Circuit . __________________________________________________________________________________________ GS IEC 61138 : 1995 Amd. and soft control systems.connected photovoltaic power generating systems.060. It identifies the man machine interface (MMI) requirements for dedicated systems. 29. __________________________________________________________________________________________ GS IEC 61173 : 1992Ψ 27.alone and grid.Guide 19 Pages Gr 2 This standard gives guidance on the protection of overvoltage issues for both stand.Operator Controls 27.Breakers 31 Pages This applies only to ground mounted high-voltage (HV) circuit-breakers. __________________________________________________________________________________________ 107 . multiplexed conventional systems. and does not cover the seismic qualification of circuit . It is intended to identify sources of overvoltage hazards (including lightning) to define the types of protection such as grounding.220. 33 Pages Deals with impulse puncture testing in air of ceramic and glass insulator units of class B (see IEC 60383-1) cap and pin.alone photovoltaic systems.160 Published by GSA in 2007 Characteristic Parameters of Stand-Alone Photovoltaic (PV) Systems 27 Pages Gr 3 This standard defines the major electrical.060. __________________________________________________________________________________________ GS IEC 61211 : 2004Ψ 29.breakers in metal enclosed switchgear.240.120. __________________________________________________________________________________________ GS IEC 61166 : 1993Ψ 17.20 Published by GSA in 2005 High-Voltage Alternating Current Circuit-Breakers . mechanical and environmental parameters for the description and performance analysis of stand. __________________________________________________________________________________________ GS IEC 61194 : 1992Ψ 27.20 8 Pages This standard applies to flexible cables with covering based on ethylene propylene rubber (EPR) or on polyvinyl chloride (PVC) for portable earthing and short-circulating equipment.01.Control Rooms. stroke interception and protective devices.20 34 Pages This standard applies to flexible cables with covering based on ethylene propylene rubber (EPR) or on polyvinyl chloride (PVC) for portable earthing and short-circulating equipment. pin type ( including pin-post type) and class B long rod insulators __________________________________________________________________________________________ GS IEC 61227 : 1993Ψ Published by GSA in 2008 Nuclear Power Plants. shielding. the supporting structures of which are rigidly connected with the ground. voltage of a constant frequency or a stable d.c systems with voltages from plus or minus 1 000 v up to plus or minus 600 kv.c.violet (UV)radiation. where the output of the power conditioner is a stable a. line voltage.160 Published by GSA in 2008 Photovoltaic Systems . a housing (outside the insulating tube) made of elastomeric material (for example silicone or ethylene-propylene) and metal fixing devices at the ends of the insulating tube.160 Published by GSA in 2008 Secondary Cells and Batteries for Photovoltaic Energy Systems(PVES)-General 15 Pages Requirements and Methods of Test Gr 2 This standard gives general information relating to the requirements of the secondary batteries used in photovoltaic energy systems(PVES) and to the typical methods of test used of the verification of battery performances.080.080.20. Acceptance Criteria and Design 92 Pages Recommendations This technical report applies to composite hollow insulators consisting of a load bearing insulating tube made of resin impregnated fibres. __________________________________________________________________________________________ GS IEC 61345 : 1998Ψ 27. 29.2) Kv up to 18/30 (36) Kv.220.6/6 (7.Procedure for Measuring Efficiency 20 pages Gr 2 This standard describes guidelines for measuring the efficiency of power conditioners used in stand-alone and utility -interactive photovoltaic systems. __________________________________________________________________________________________ GS IEC 61427 : 2005Ψ 29.060. or functionally dependent on.C Systems 61 Pages This technical report is applicable to the determination of the withstand characteristics of ceramic and glass insulators to be used outdoors and exposed to polluted atmospheres. __________________________________________________________________________________________ GS IEC 61683 : 1999Ψ 27. voltage.Power Conditioners . __________________________________________________________________________________________ 108 . __________________________________________________________________________________________ GS IEC 61540 : 1999Ψ 29. This test is useful for evaluating the UV resistance of materials such as polymers and protective coatings.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 61245 : 1993Ψ 29. consisting of a plug. __________________________________________________________________________________________ GS IEC 61462 : 1998Ψ 29. Test methods are specified for accessories for extruded and paper insulated cables according to IEC 60502-2 and IEC 60055-1 respectively. __________________________________________________________________________________________ GS IEC 61442 : 2005Ψ 19. 27.160 Published by GSA in 2008 UV Test for Photovoltaic (PCV) Modules 6 Pages Gr 1 This standard defines a test which determines the resistance of the module when exposed to ultra.2 kV) up to 30 kV (Um = 36 kV) This standard specifies the test methods to be used for type testing accessories for power cables with rated voltage from 3. a residual current device (RCD) and one or more socket-outlets or a provision for connection.10 Published by GSA in 2006 Composite Insulators –Hollow Insulators for use in Outdoor and Indoor Electrical Equipment – Definitions. Test Methods.130 Published by GSA in 2006 Electrical Accessories – Portable Residual Current Devices without Integral Overcurrent Protection for Household 232 Pages and Similar Use (PRCDs) This standard applies to portable devices for household and similar uses (hereafter referred to as portable residual current devices (PRCDs).10 Published by GSA in 2005 Artificial Pollution Tests on High-Voltage Insulators to be used on A. on d.c.080. functionally independent of.20 Published by GSA in 2006 Test Methods for Accessories for Power Cables with Rated Voltages from 6 kV (Um = 70 Pages 7. It is also useful for evaluating the compatibility of material.160 23 Pages Gr.180 6 Pages Gr 1 The test in this standard is to determine the resistance of the module to corrosion from salt mist.180 Published by GSA in 2008 Crystalline Silicon Photovoltaic (PV) Array. designation.Characteristics of the utility interface 27. __________________________________________________________________________________________ GS IEC 61923 : 1997Ψ 97. __________________________________________________________________________________________ GS IEC 61727 : 2004Ψ Published by GSA in 2007 Photovoltaic (PV) Systems .220.180 9 pages Gr.Cadmium 57 Pages Specifies marking.interconnected photovoltaic (PV) power systems operating in parallel with th utility and utilizing static(Solid-state) non-islanding inverters for the conversion of DC to AC.30 Published by GSA in 2005 Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes Portable Sealed Rechargeable Single Cells . __________________________________________________________________________________________ 109 . suitable for use in any orientation. It laso describes specific recommendations for systems rated at 10kVA or less.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 61701 : 1995Ψ Published by GSA in 2008 Salt Mist Corrosion Testing of Photovoltaic (PV) Modules 27. __________________________________________________________________________________________ GS IEC 61730-2 : 2004Ψ 27. 3 This standard applies to utility . test and requirements for portable sealed nickel-cadmium small prismatic.160 Published by GSA in 2008 Photovoltaic (PV) Module Safety Qualification.030 Replaces GS 2:1969 (Pub by GSA in 2006) Household Electrical Appliances – Method of Measuring performance – Assessment of 46 Pages Repeatability and Reproducibility Deals with the determination of repeatability and reproducibility of test methods used for assessing the characteristics of household electrical appliances. cylindrical and button rechargeable single cells. __________________________________________________________________________________________ GS IEC 61829 : 1995Ψ 27. 1 The standard defines predicted short-term characteristics of direct coupled photovoltaic (PV) water pumping systems.Part 2: Requirement for testing 39 Pages Gr 4 This standard describes the testing requirements for photovoltaic (PV) modules in order to provide safe and mechanical operation during their expected lifetime. __________________________________________________________________________________________ GS IEC 61951-1 : 2003Ψ 29. and the quality and uniformity of protective coatings __________________________________________________________________________________________ GS IEC 61702 : 1995Ψ Published by GSA in 2007 Rating of Direct Coupled Photovoltaic (PV) Pumping Systems 27.On-Site Measurement of I-V Characteristics 12 Pages Gr 2 This standard describes procedures for on-site measurement of crystalline silicon photovoltaic (PV) array characteristics and for extrapolating these data to Standard Test conditions (STC) or other selected temperatures and irradiance values. dimensions. It also defines minimum actual performance values to be obtained on-site.Part 1 :Nickel. General Requirements. __________________________________________________________________________________________ GS IEC 61960 : 2003Ψ 29.Part 61: Power Consumption and Voltage Requirements 18 Pages This standard applies only to newly manufactured "combined meters”.c.) – Particular Requirements .c.220.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 61959 : 2004Ψ 29. active and reactive) and meters.20 Published by GSA in 2006 Electricity Metering Equipment (a. T __________________________________________________________________________________________ GS IEC 62052-11 : 2003Ψ 17.220. __________________________________________________________________________________________ GS IEC 62053-22 : 2003Ψ 17. 17 Pages Specifies tests and requirements for verifying the mechanical behaviour of sealed portable secondary cells and batteries during handling and normal use.99 Published by GSA in 2005 Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes 33 Pages Secondary Lithium Cells and Batteries for Portable Applications Specifies performance tests.220.2 S and 0. link.2 S and 0.) – Particular Requirements Part 21: Static Meters for Active Energy (classes 1 and 2) 54 Pages Applies only to newly manufactured static watt-hour meters of accuracy classes 1 and 2. Tests and Test Conditions 94 Pages –Part 11: Metering equipment Covers type tests for electricity metering equipment for indoor and outdoor application and applies to newly manufactured equipment designed to measure the electrical energy on 50 Hz or 60 Hz networks.220. __________________________________________________________________________________________ GS IEC 62053-61 : 1998Ψ 33.Part 22: Static 40 Pages Meters for Active Energy (classes 0.g.) – Particular Requirements . measuring more than one type of electric energy (e. markings. dimensions and other requirements for secondary lithium single cells and batteries for portable applications.c.c.5 S. for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only.220. with a voltage up to 600 V. designations. __________________________________________________________________________________________ 110 .Part 3: Method of Specifying the Performance 212 Pages and Test Requirements This standard applies to electronic indirect a.20 Published by GSA in 2006 Electricity Metering Equipment (a.20 Published by GSA in 2006 Electricity Metering Equipment (AC) . __________________________________________________________________________________________ GS IEC 62040-3 : 1999Ψ 29.99 Published by GSA in 2005 Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes Mechanical Tests for Sealed Portable Secondary Cells and Batteries. converter systems with electrical energy storage means in the d. for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only.5 S) Applies only to newly manufactured static watt-hour meters of accuracy classes 0.c.200 Published by GSA in 2006 Electricity Metering Equipment (a. __________________________________________________________________________________________ GS IEC 62053-21 : 2003Ψ 17.200 Published by GSA in 2006 Uninterruptible Power Systems (UPS) . 100. details. tests and requirements for vented nickel-cadmium prismatic secondary single cells where special provisions have been made in order to have partial or. __________________________________________________________________________________________ 111 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC 62133 : 2002 Ψ 29.10 Published by GSA in 2006 Test Method on Electromagnetic Emissions from Electronic Ballasts for Single. The report only contains National Systems which are commonly used in homes and offices.030 173 Pages This standard specifies the essential characteristics of household refrigerating appliances. an independent method by which the radio disturbance characteristics of electronic ballasts for Class I fluorescent lamp luminaires may be compared against the requirements of CISPR 15.220.080. __________________________________________________________________________________________ GS IEC 62259 : 2003Ψ 29.30 Published by GSA in 2006 Plugs and Socket-Outlets for Domestic and Similar General Use Standardized in Member 368 Pages Countries of IEC Gives general information about the systems of plugs and socket-outlets for household and similar purposes which are used in the IEC countries.10 Published by GSA in 2005 Hollow Pressurized and Unpressurized Ceramic and Glass Insulators for use in Electrical 95 Pages Equipment with Rated Voltages greater than 1 000 V This is applicable to ceramic and glass hollow insulators intended for general use in electrical equipment.Characteristics and Test Methods 97. __________________________________________________________________________________________ GS IEC TR 60083 : 2004Ψ 29. under intended use and reasonably foreseeable misuse. with a rated voltage above 50 V but not exceeding 440 V. for use in Portable Applications Specifies requirements and tests for the safe operation of portable sealed secondary cells and batteries (other than button) containing alkaline or other non-acid electrolyte. with the aid of reference luminaires. full gas recombination __________________________________________________________________________________________ GS IEC 62271-100 : 2003Ψ 29. which is a technical report.Part 100: High-Voltage AlternatingCurrent Circuit-Breakers 588 Pages This standard is applicable to a.10 Published by GSA in 2006 High-Voltage Switchgear and Control gear . __________________________________________________________________________________________ GS IEC 62155 : 2003Ψ 29. designation. dimensions.120.and Double-capped Fluorescent Lamps 36 Pages CISPR 30. under very specific conditions. factory-assembled and cooled by internal natural convection or forced air circulation.c. __________________________________________________________________________________________ GS IEC CISPR 30 : 2001Ψ 33.c. and establishes test methods for checking the characteristics. __________________________________________________________________________________________ GS IEC 62552 : 2007Ψ Published by GSA in 2008 Household Refrigerating Appliances . ceramic hollow insulators intended for use with a permanent gas pressure in switchgear and control gear. either indoors or outdoors. and for Batteries made from 35 Pages them.30 Published by GSA in 2005 Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells.99 Published by GSA in 2010 Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes Nickel Cadmium Prismatic Secondary Single Cells with Partial Gas Recombination 35 Pages This standard specifies marking. circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V.130. intended for household and similar purposes.220. It is therefore limited to systems for a. Instructions for the Inspection of Citrus Planting Material 7 Pages Gr.Guidelines for Consumer Panel Testing 97. __________________________________________________________________________________________ GS IEC TS 61463 : 2000Ψ Published by GSA in 2005 Bushings .c.Part 25: Guidance for the Design and Performance of 71 Pages a. It define a single minimum method for assessing the conformity of mango planting material against the Ghana Standard __________________________________________________________________________________________ 112 .c. motors specifically designed for use on converter supplies.30. 1 Inspection Manual .080. other apparatus or buildings.060.080 Ed.020: 97.Seismic Qualification 29. It covers the operation over the whole speed setting range.030 12 Pages Applies to panel testing of household electrical appliances within the scope of IEC technical committee 59 : Performance of household electrical appliances.110.080 Ed.060. 1 This manual applies to planting material for the cultivation of Mango. __________________________________________________________________________________________ GS IEC TR 61592 : 2003Ψ Published by GSA in 2005 Household Electrical Appliances . 65.20 65 Pages Is applicable to alternating current and direct bushings for rated voltages above 52 kV. 67.160 Published by GSA in 2008 Rotating Electrical Machines .Instructions for the Inspection of Mango Planting Material 7 Pages Gr. 65. when fed from converters.30. __________________________________________________________________________________________ GS IEC TS 60034-17 : 2006Ψ 29.Part 17: Cage Induction Motors when Fed from converters.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IEC TR 60887 : 2003Ψ Published by GSA in 2005 Glass Bulb Designation System for Lamps 29.140. __________________________________________________________________________________________ GS IM 9 : 2009 01. mounted on transformers.160 Published by GSA in 2008 Rotating Electrical Machines. Motors Specifically designed for Converter Supply Gr 8 This standard describes the design features and performance characteristics of a.110.Application Guide 21 Pages Gr 3 This Technical Specification deals with the steady-state operation of cage induction motors within the scope of IEC 60034-12. but does not deal with starting or transient phenomena __________________________________________________________________________________________ GS IEC TS 60034-25 : 2007Ψ 29. It also specifies the interface parameters and interactions between the motor and the converter including installation guidance as part of a power drive system. 1 This manual applies to planting material for the cultivation of citrus.20 21 Pages It describes a system of nomenclature that provides designations of the glass bulbs used as envelopes for electric lamps. 1 Inspection Manual . It define a single minimum method for assessing the conformity of citrus planting material against the Ghana Standard __________________________________________________________________________________________ GS IM 10 : 2009 01. The application of such designations is directed towards the descriptions of finished lamps. 67. cabled yarns. 1 This manual applies to fresh garden eggs. seeds.110. __________________________________________________________________________________________ GS IM 14 : 2011 Ed.30. The aim of this manual is to define a single minimum method by which inspectors may assess the conformity of Moringa leaf products against the Ghana standard. 67.060 8 Pages Gr 1 This manual defines a single minimum method for assessing the conformity of cowpea. The instructions in this manual do not establish any substantial rule not legally authorized by the Ghana standard for moringa leaf products.080. It is applicable to yarn intermediates such as slivers. It does not cover Moringa products derived from the stem barks. 1 Inspection Manual . 67.080. It defines a single minimum method by which inspector may assess the conformity of fresh garden eggs .080.10 8 pages Gr. __________________________________________________________________________________________ GS IM 13 : 2011 Ed.Instructions for the Inspection of Fresh Aubergines 01.110 . cordage and rope. __________________________________________________________________________________________ 113 .01 Published by GSA in 2006 Geometrical Product Specifications (GPS) . 1 Inspection manual . 1 This inspection manual applies to moringa Leaf Products produced from Moringa Oleifera lam.120.01 8 Pages Gr. twine. __________________________________________________________________________________________ GS ISO 2 : 1973Ψ 59. 65.060. roots and flowers.080 Ed.Instructions for Inspection of Dried Cowpea Grains 01. or rovings.Instructions for the Inspection of Pineapple Planting Material 6 Pages Gr 1 This manual applies to planting material for the cultivation of pineapple. 1 Instructions for the Inspection of Moringa Leaf Products 11.01 8 Pages Gr. It defines a single minimum method by which inspector may assess the conformity of fresh aubergines. 67.Instructions for the Inspection of Fresh Garden Eggs 01.110 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS IM 11 : 2009 01. and to threads. __________________________________________________________________________________________ GS IM 15 : 2011 Ed. __________________________________________________________________________________________ GS ISO 1 : 2002Ψ 17.040.110. piled yarns. 1 This manual applies to fresh garden eggs. 67. 1 Inspection Manual . slubbings. 1 Inspection Manual . to single yarns. It define a single minimum method for assessing the conformity of pineapple planting material against the Ghana Standard __________________________________________________________________________________________ GS IM 12 : 2009 Ed.Designation of the Direction of Twist in Yarns and related products 1 Page Gr 1 This standard specifies the method of designating the direction of twist in textile yarns.Standard Reference Temperature for Geometrical Product Specification and Verification 3 Pages Gr 1 This standard specifies the standard reference temperature for geometrical product specification and verification.20 Published by GSA in 2008 Textiles . for joints made pressure-tight by the mating of the threads.020 4 Pages Gr 1 This standard specifies series of preferred numbers __________________________________________________________________________________________ GS ISO 7-1 : 1994Ψ 21. for the validation of taper internal and external threads and parallel internal threads on piping systems components and other products __________________________________________________________________________________________ GS ISO 14 : 1982Ψ 21. __________________________________________________________________________________________ GS ISO 15 : 1998Ψ Published by GSA in 2006 Rolling Bearings . light series and medium series.Dimensions.30 Published by GSA in 2006 Straight-sided Splines for Cylindrical Shafts with Internal Centering .30 Published by GSA in 2006 Pipe Threads where Pressure-Tight Joints are made on the Threads — 30 Pages Part 2: Verification by means of Limit Gauges Gr 3 This standard specifies a process using limit gauges. dimensions.120. insert bearings and some types of needle roller bearings.040. 12 Pages Tolerances and Verification Gr 2 This standard lays down dimensions. in millimetres.30 Published by GSA in 2006 Pipe Threads where Pressure-Tight Joints are made on the Threads 7 Pages Part 1: Dimensions. tolerances and designation for jointing pipe threads. airframe bearings and instrument precision bearings standardized by ISO do not conform to this general plan because the dimensions given were not found to be optimal for the bearings in question. __________________________________________________________________________________________ GS ISO 7-2 : 2000Ψ 21. __________________________________________________________________________________________ GS ISO 17 : 1973Ψ 17.01 1 Page Gr 1 This standard specifies the Standard tuning frequency (or Standard musical pitch).100.Series of Preferred Numbers 17.020 Published by GSA in 2006 Guide to the use of Preferred Numbers and of Series of Preferred Numbers 3 Pages Gr 1 This standard constitutes a guide to the use of preferred numbers and of series of preferred numbers. __________________________________________________________________________________________ GS ISO 16 : 1975Ψ Published by GSA in 2006 Acoustics . General Plan 21. Tolerances and Designation Gr 1 This standard specifies the requirements for thread form.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3 : 1973Ψ Published by GSA in 2007 Preferred Numbers . Tapered roller bearings. __________________________________________________________________________________________ 114 . of straight-sided splines for cylindrical shafts with internal centering. This Standard also specifies control methods and corresponding gauges. sizes 1 /I6 to 6 inclusive.140.Standard Tuning Frequency (Standard Musical Pitch) 17.Radial Bearings .20 19 Pages Gr 2 This standard lays down preferred boundary dimensions for radial bearings.Boundary Dimensions.040. 060 Published by GSA in 2006 Quantities and Units Part 0 : General Principles 21 Pages Gr 3 This standard gives general information about principles concerning physical quantities.Dimensions and Tolerances 5 Pages Gr 1 This standard specifies the principal dimensions of flat transmission belts and of the corresponding pulleys. 12. Vulcanized or Thermoplastic .060 Published by GSA in 2006 Rubber. Procedures common to a number of the methods are discussedbriefly.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 22 : 1991Ψ 21. hardened bearing steel in accordance with good manufacturing practice and basically of conventional design as regards the shape of the rolling contact surfaces.20 15 Pages Gr 2 This standard specifies the major dimensions of single-direction and double-direction thrust bearings with flat back faces. high quality.20 14 Pages Gr 2 This standard specifies methods of calculating the basic static load rating and the static equivalent load for rolling bearings within the size ranges shown in the relevant ISO standards.100. 23 and 24. It gives the minimum bore diameters of housing washers and maximum outside diameters of shaft washers of bearings in dimensions series.100.Thrust Bearings . 14. several terms are defined. __________________________________________________________________________________________ GS ISO 76 : 2006Ψ Published by GSA in 2010 Rolling bearings — Static load ratings 21. __________________________________________________________________________________________ GS ISO 37 : 2005Ψ 83.Boundary Dimensions. especially the International System of Units. an outline of the form of the methods is given and the contents of the clauses constituting the methods are discussed. General Plan 21. commonly used.01 Published by GSA in 2005 Textiles . __________________________________________________________________________________________ 115 . __________________________________________________________________________________________ GS ISO 105-A01 : 1994Ψ 59.Part A01: General Principles of Testing 7 Pages Gr 2 Provides general information about the methods for testing colour fastness of textiles for the guidance of users.080.01 Published by GSA in 2006 Belt Drives .Strain 25 Pages Properties Gr 3 This standard describes a method for the determination of the tensile stress-strain properties of vulcanized and thermoplastic rubbers __________________________________________________________________________________________ GS ISO 49 : 1994Ψ Published by GSA in 2006 Malleable Cast Iron Fittings Threaded to ISO 7-I 23. and coherent unit systems. SI. manufactured from contemporary. equations. __________________________________________________________________________________________ GS ISO 31-0 : 1992Ψ 01.Flat Transmission Belts and Corresponding Pulleys .Determination of Tensile Stress . 13. __________________________________________________________________________________________ GS ISO 104 : 2002Ψ Published by GSA in 2006 Rolling Bearings .40 38 Pages Gr 5 This standard specifies requirements for the design and Performance of malleable cast iron threaded pipe fittings. The uses and the limitations of the methods are pointed out. quantity and unit symbols.040. 22. 11.220.Test for Colour Fastness . __________________________________________________________________________________________ GS ISO 105-A03 :1993Ψ 59.Part E01 : Colour Fastness to Water 59.080.080.080. to the combined action of rubbing and of organic solvents used in spot-cleaning.Test for Colour Fastness 2 Pages Part A03 : Grey Scale for Assessing Staining Gr 1 Describes the grey scale for determining staining of adjacent fabrics in colour fastness tests.Test for Colour Fastness .Part E04 .01 Published by GSA in 2005 Textiles .e.01 Published by GSA in 2010 Textiles . __________________________________________________________________________________________ GS ISO 105-B01 : 1994Ψ 59. and its use.01 3 Pages Gr. __________________________________________________________________________________________ GS ISO 105-E01 : 1998Ψ Published by GSA in 2005 Textiles .080. and its use.01 Published by GSA in 2006 Textiles .01 Published by GSA in 2005 Textiles .Colour Solvents Gr 1 This standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms.080.01 Published by GSA in 2005 Textiles .Test for Colour Fastness Part A02 : Grey Scale for Assessing change in Colour 2 Pages Gr 1 Describes the grey scale for determining changes in colour of textiles in colour fastness tests. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared. __________________________________________________________________________________________ GS ISO 105-D02 : 1993Ψ 59. A precise calorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared.01 Published by GSA in 2010 Textiles .Test for Colour Fastness Part B01 : Colour Fastness to Light .Daylight 9 Pages Gr 1 Specifies a method intended for determining the resistance of the colour of textiles of all kinds and in all forms to the action of daylight __________________________________________________________________________________________ GS ISO 105-D01 : 2010Ψ 59. i.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 105-A02 : 1993Ψ 59.Tests for Colour Fastness .080. except loose fibre.080. 1 This standard specifies a method for determining the resistance to the colour of textiles of all kinds and in all forms to immersion in water __________________________________________________________________________________________ GS ISO 105-E04 : 2008Ψ 59.Colour Fastness to Perspiration 4 Pages Gr 1 Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of human perspiration __________________________________________________________________________________________ 116 . localized "spoting" carried out by hand.Test for Colour Fastness 2 Pages Part DO2: Colour Fastness to Rubbing .Tests For Colour Fastness Part DO1 : Colour Fastness to Dry Cleaning Using Perchloroethylene Solvent 5 Pages Gr 1 This standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to dry cleaning using perchloethylene solvent. when it is damp and when it is wet. to rubbing off and staining other materials.Tests for Colour FastnessPart E07 : Colour Fastness to Spotting . __________________________________________________________________________________________ GS ISO 105-X11 : 1994Ψ 59. including textile floor coverings.01 Published by GSA in 2005 Textiles . The method is applicable to textiles made from all fibres in the form of yarn or fabric.Indication of Dimensions and Tolerances 33 Pages Part 1: General Principles Gr 4 This standard establishes the general principles of dimensioning applicable for all types of technical drawings. __________________________________________________________________________________________ GS ISO 113 : 1999Ψ Published by GSA in 2006 Rolling Bearings .01 Published by GSA in 2006 Technical Drawings . the conditions in which they are produced. e.100.080.100. one with a dry rubbing cloth and one with a wet rubbing cloth. __________________________________________________________________________________________ GS ISO 115 : 2003Ψ Published by GSA in 2008 Unalloyed Aluminium Ingots for Remelting .080.Boundary Dimensions 21.Water 3 Pages Gr 1 This standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 105-E07 : 2010Ψ 59. 2 and 3 as specified in ISO 15 and for four bolt plummer block housings primarily intended for rolling bearings in diameter series 0.100. It specifies the classification and designation applicable to these grades.g.Test for Colour Fastness Part X12 : Colour Fastness to Rubbing 3 Pages Gr 1 Specifies a method for determining the resistance of the colour of textiles of all kinds.01 Published by GSA in 2006 Technical Drawings . including textile floor coverings and other pile fabrics. their designations and their configurations.01 Published by GSA in 2008 Textiles .Test for Colour Fastness .General Principles of Presentation . diagrams.080.Plumber Block Housings .10 8 Pages Gr 1 This standard defines the requirements for grades of unalloyed aluminium ingots intended for remelting. whether dyed or printed. their properties and the marks by which they are identified.Basic Convention for lines 10 Pages Gr 1 This standard establishes the types of lines. __________________________________________________________________________________________ 117 . Two tests may be made. __________________________________________________________________________________________ GS ISO 129-1 : 2004Ψ 01.Classification and Composition 77. plans or maps. __________________________________________________________________________________________ GS ISO 105-X12 : 2001Ψ 59. 1. __________________________________________________________________________________________ GS ISO 128-20 : 1996Ψ 01.120.01 Published by GSA in 2011 Textiles . Test are given for hot pressing when the textile is dry. 1 and 2. The end-use of the textile usually determines which test should be made.Part 11: Colour Fastness to Hot Pressing 3 Pages Gr 1 This standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to ironing and to processing on hot cylinders.20 6 Pages Gr 1 This standard specifies boundary dimensions for two bolt plummer block housings primarily intended for rolling bearings in diameter series 0. as well as general rules for draughting of lines used in technical drawings. multiple or joined.Thrust Bearings . grooved pulleys for V-ribbed belts.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 139 : 2005Ψ Published by GSA in 2005 Textiles . Board and Pulps . and also the procedures for measuring the temperature and relative humidity __________________________________________________________________________________________ GS ISO 188 : 2007Ψ 83.01 4 Pages Gr 1 This standard specifies two empirical methods for the quantitative determination of the loss of mass from a plastic material under defined conditions of time and temperature.040 Published by GSA in 2008 Paper. in the presence of activated carbon __________________________________________________________________________________________ GS ISO 186 : 2002Ψ Published by GSA in 2008 Paper and Board . as specified in ISO 104. and for testing pulp.Sampling to Determine Average Quality 85.Tolerances 21.060 Published by GSA in 2010 Rubber. __________________________________________________________________________________________ GS ISO 199 : 2005Ψ Published by GSA in 2006 Rolling Bearings .080. toothed pulleys for synchronous belts.Activated Carbon Method 83.060 8 Pages Gr 1 This standard specifies a method od obtaining a representative sample from a lot of paper or board. either single.Determination of Loss of Plasticizers.Limiting Values for Adjustment of Centres 21. paper and board.100. __________________________________________________________________________________________ GS ISO 176 : 2005Ψ Published by GSA in 2006 Plastics.10 6 Pages Gr 1 This standard specifies the limiting values for the adjustment of centres of two transmission pulleys.Standard Atmosphere for Conditioning and Testing and 8 Pages Procedure for Monitoring the Atmosphere and Conditioning of Samples Gr 1 This standard specifies the standard atmosphere for conditioning.01 6 Pages Gr 1 This standard defines the characteristics and use of a standard atmosphere for conditioning.220.Standard Atmospheres for Conditioning and Testing 59.080. for determining the physical and mechanical properties of textiles and a standard alternative atmosphere that may be used if agreed between parties.20 10 Pages Gr 1 This standard specifies tolerances for boundary dimensions (except chamfer dimensions) and for the running accuracy of thrust rolling bearings with flat back faces.Pulleys . including solid and corrugated fibreboard for testing to determine whether or not its average quality complies with set specifications __________________________________________________________________________________________ GS ISO 187 : 1990Ψ 85. vulcanized or thermoplastic — Accelerated ageing and heat resistance tests 17 Pages Gr 2 This standard specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. It is applicable to crowned pulleys for flat belts. __________________________________________________________________________________________ GS ISO 155 : 1998Ψ Published by GSA in 2006 Belt drives . grooved pulleys for V-belts. __________________________________________________________________________________________ 118 . the bore and the bore minimum chamfer of separate thrust collars for cylindrical roller bearings in diameter series 0. __________________________________________________________________________________________ GS ISO 254 : 1998Ψ Published by GSA in 2006 Belt drives .20 Published by GSA in 2010 Rolling bearings — Cylindrical roller bearings.100. __________________________________________________________________________________________ GS ISO 225 : 1983Ψ 21. intended for the mechanical assembly of the component parts of fittings. thread sizes 1/16 to 6 inclusive. Both internal and external threads are parallel threads. Dimensions for overall width and other geometrical features are not specified as they are dependent on the internal design of the bearings. 3.20 Published by GSA in 2006 Test Code for Machine Tool .Quality.10 4 Pages Gr 1 This standard specifies the characteristics of quality which are common to all transmission pulleys.Tight Joints are not made on the Threads 13 Pages Part 2: Verification by Means of Limit gauges Gr 2 This standard specifies the verification.Part 2: Determination of accuracy and Repeatability of 15 Pages Positioning Numerically Controlled Axes Gr 2 This standard specifies methods of testing and evaluating the accuracy and repeatability of positioning of numerically controlled machine tool axes by direct measurement of individual axes on the machine. __________________________________________________________________________________________ 119 . by means of limit gauges. Studs and Nuts .30 Published by GSA in 2006 Pipe Threads where Pressure . separate thrust collars — Boundary dimensions 4 Pages Gr 1 This standard specifies the width.150.30 Published by GSA in 2006 Pipe Threads where Pressure .Bolts.220.Chemical Composition 77. screws.040. the maximum outside diameter.Tight Joints are not made on the Threads 8 Pages Part 1 . Finish and Balance 21. cocks and valves. of cylindrical threads __________________________________________________________________________________________ GS ISO 230-2 : 1997Ψ 25. __________________________________________________________________________________________ GS ISO 246 : 2007Ψ 21. recommended for use unless otherwise specified in the appropriate product Standards. tolerances and designation Gr 1 This standard specifies the requirements for thread form.Pulleys . __________________________________________________________________________________________ GS ISO 228-1 : 2000Ψ 21. Screws.040. __________________________________________________________________________________________ GS ISO 228-2 : 1987Ψ 21.040. dimensions. and 4 as specified in ISO 15.060. etc.01 Published by GSA in 2006 Fasteners .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 209 : 2007Ψ Published by GSA in 2008 Aluminium and Aluminium Alloys . tolerances and designation for fastening pipe threads. studs and nuts. It establishes specific quality levels for the finish and balance of transmission pulleys and test pulleys.Dimensions.10 3 Pages Gr 1 This standard specifies the designations indicating the chemical composition of aluminium and aluminium alloys. accessories. 2.Symbols and Designations of Dimensions 19 Pages Gr 2 This standard lays down the method of dimensioning bolts. regardless of their method of manufacture (with the exception of fittings fabricated from pipes) and composition. __________________________________________________________________________________________ GS ISO 262 : 1998Ψ 21.220. __________________________________________________________________________________________ GS ISO 266 : 1997Ψ Published by GSA in 2006 Acoustics .01 3 Pages Gr 1 This standard specifies widths across flats for hexagon products.040.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 255 : 1990Ψ 21.Laying Lengths . __________________________________________________________________________________________ GS ISO 261 : 1998Ψ Published by GSA in 2006 ISO General Purpose Metric Screw Threads — General Plan 21. The preferred frequencies are based on the RIO series of preferred numbers in GS IS0 3 and the reference frequency of 1 000 Hz. For tolerances see ISO 965-1.Metric Series Gr 1 This standard specifies the series of diameters to be used and the dimensions which are common to all types of unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure.140.10 Published by GSA in 2006 Belt Drives .060 2 Pages Gr 1 This standard specifies clearance hole diameters for general purpose applications.060. These values result from bearing area calculations in connection with IS0 bolt and nut product standards.10 Published by GSA in 2006 ISO General Purpose Metric Screw Threads — Selected Sizes for Screws.Geometrical Inspection of Grooves 7 Pages Gr 1 This standard specifies the methods of checking the regularity of the grooves and pulleys for V-belts specified in the System based on datum width. bolts and nuts in the diameter range from 1 mm to 64 mm of ISO general purpose metric screw threads (M) having basic profile according to ISO 68-1. Bolts and Nuts 2 Pages Gr 1 This standard specifies selected sizes for screws. screws and nuts. Basic dimensions are given in ISO 724. hexagon nuts and hexagon flanged bolts. __________________________________________________________________________________________ GS ISO 272 : 1982Ψ Published by GSA in 2006 Fasteners . __________________________________________________________________________________________ GS ISO 264 : 1976Ψ 23. __________________________________________________________________________________________ 120 .45 Published by GSA in 2006 Unplasticized Polyvinyl Chloride (PVC) Fittings with Plain Sockets for Pipes under 5 Pages Pressure .Pulleys for V-belts (System Based on Datum width) .10 5 Pages Gr 1 This standard specifies general purpose metric screw threads (M) having basic profile according to ISO 68-1.01 3 Pages Gr 1 This standard specifies preferred frequencies for acoustical measurements.Clearance Holes for Bolts and Screws 21.040.040.Preferred Frequencies 17. The grooved pulleys may be designed for use with classical or narrow V-belts.Hexagon Products .Widths across flats 21. for example hexagon head bolts and screws. It also specifies a logical ratio between under head (or nut) bearing area and the tensile stress area of the screw thread __________________________________________________________________________________________ GS ISO 273 : 1979Ψ Published by GSA in 2006 Fasteners . to be used in the respective product standards. CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 281 : 2007Ψ Published by GSA in 2010 Rolling bearings — Dynamic load ratings and rating life 21. The terms are listed alphabetically in English with definitions. measurement or gauging.040. minimum chamfer dimensions on the snap ring groove side of the outer ring and the snap ring dimensions for radial bearings in dimension series 18 and 19 and diameter series 0. __________________________________________________________________________________________ GS ISO 286-2 : 1988Ψ 17.Tolerancing of Linear and Angular Dimensions 01.Oven-Drying Method 85.080. high quality hardened bearing steel.060 4 Pages Gr 1 This standard specifies an oven-drying method for the determination of the moisture content of paper and board at the time of sampling. __________________________________________________________________________________________ GS ISO 406 : 1987Ψ Published by GSA in 2006 Technical Drawings .01 Published by GSA in 2007 Plastics . 3 and 4 (except dimension series 00.General Technical Delivery Requirements 18 Pages Gr 2 This standard specifies the general technical delivery requirements for all steel products.Vocabulary 232 Pages Gr 24 This standard defines terms used in the plastic industry in English and French.20 Published by GSA in 2006 Rolling Bearings .100.Radial Bearings with Locating Snap Ring .040. __________________________________________________________________________________________ GS ISO 472 : 1999Ψ 01.10 Published by GSA in 2006 ISO System of Limits and Fits Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts 43 Pages Gr 5 This standard gives values of the limit deviations for commonly used tolerance classes (zones) for holes and shafts. 82 and 83). __________________________________________________________________________________________ GS ISO 464 : 1995Ψ 21.20 Published by GSA in 2008 Steel and Steel Products . Indicating such tolerances does not necessarily imply the use of any particular method of production.Determination of Moisture Content . It also covers values for the upper deviations ES (for holes) and es (for shafts) and the lower deviationsEi9for holes) __________________________________________________________________________________________ GS ISO 287 : 1985Ψ Published by GSA in 2006 Paper and Board . in accordance with good manufacturing practice and basically of conventional design as regards the shape of rolling contact surfaces.20 51 Pages Gr 6 This standard specifies methods of calculating the basic dynamic load rating of rolling bearings within the size ranges manufactured from contemporary.100. with the exception of steel castings and powder metallurgical products.100. 2. commonly used. 83.080.20 4 Pages Gr 1 This standard specifies the indication of tolerances for linear and angular dimensions on technical drawings.Dimensions and Tolerances 8 Pages Gr 1 This standard specifies the snap ring groove dimensions.83. __________________________________________________________________________________________ GS ISO 404 : 1992Ψ 77. __________________________________________________________________________________________ 121 . CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 487 : 1998Ψ Published by GSA in 2006 Steel Roller Chains..01 22 Pages Gr 2 This standard specifies requirements for the attachment of part-turn actuators.080. dimensionally derived from the malleable iron type and suitable for the conditions of operation and maintenance prevailing in such fields as agriculture. with or without gearboxes. GS ISO 355 and GS ISO 8443. Types S and C. __________________________________________________________________________________________ GS ISO 527-2 : 1993Ψ 83.120 3 Pages Gr 1 This standard establishes four series in millimetres and five series in inches.Radial Bearings .Part-turn Actuator Attachment 23.01 Published by GSA in 2006 Plastics. __________________________________________________________________________________________ GS ISO 521 : 2001Ψ Published by GSA in 2006 Industrial Valves .220.020 Published by GSA in 2006 Guide to the Choice of Series of Preferred Numbers and of Series Containing more 7 Pages Rounded Values of Preferred Numbers Gr 1 This standard completes GS IS0 17 by supplementary directives regarding the choice of series and the possible use of more rounded values.01 Published by GSA in 2006 Plastics .Shaft Heights 21.Tolerances 21. mechanical handling.080. __________________________________________________________________________________________ GS ISO 527-1 : 1993Ψ 83. of shaft heights for driving and driven machines. building.060. to industrial valves. __________________________________________________________________________________________ GS ISO 497 : 1973Ψ 17. Attachments and Sprockets 21. and of associated chain sprockets.30 18 Pages Gr 3 This standard specifies the characteristics of a range of steel roller chains. etc.Determination of Tensile Properties 5 Pages Part 2: Test Conditions for Moulding and Extrusion Plastics Gr 1 This standard specifies the test conditions for determining the tensile properties of moulding and extrusion plastics __________________________________________________________________________________________ 122 . __________________________________________________________________________________________ GS ISO 492 : 2002Ψ Published by GSA in 2006 Rolling Bearings .Determination of Tensile Properties 9 Pages Part 1: General Principles Gr. 1 This standard specifies the general principles for determining the tensile properties of plastics and plastic composites under defined conditions.100. __________________________________________________________________________________________ GS ISO 496 : 1973Ψ Published by GSA in 2006 Driving and Driven Machines .20 25 Pages Gr 3 This standard specifies tolerances for boundary dimensions (except chamfer dimensions) and the running accuracy of radial rolling bearings specified in GS ISO 15. quarrying and related industry. 200.120 Published by GSA in 2006 Test Sieves . including corrugated fireboard. __________________________________________________________________________________________ 123 .Cobb Method 85.01 18 Pages Gr 2 This standard specifies a method for calculating the loudness experience by a typical listener.Metal wire Cloth. 15N/J and 25N/J (Effective System) 16 Pages Gr 2 This standard specifies the principal characteristics of grooved pulleys (for groove sections 9N/J.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 529 : 2001Ψ 21.Grooved Pulleys for Narrow V-belts Groove Sections 9N/J.Determination of Water Absorptiveness .060 4 Pages Gr 1 This standard specifies a method of determining the water absorptiveness of sized paper and board. __________________________________________________________________________________________ GS ISO 534 : 2005Ψ Published by GSA in 2008 Paper and Board .140.Determination of Thickness. perforated metal plate and electroformed sheet as sieving media in test sieves. density and Specific Volume 85. __________________________________________________________________________________________ GS ISO 565 : 1990Ψ 19.220. 15N/J and 25N/J) intended to take both single and joined narrow V-belts for industrial power transmission drives.Methods for Calculating Loudness Level 17. under standard conditions __________________________________________________________________________________________ GS ISO 536 : 1995Ψ Published by GSA in 2008 Paper and Board .060 13 Pages Gr 2 This standard specifies two methods for measuring the thickness of paper and board: a) the measurement of a single sheet of paper or board as a single sheet thickness b)the measurement of a pack of sheets of paper as a bulking thickness __________________________________________________________________________________________ GS ISO 535 : 1991Ψ Published by GSA in 2006 Paper and Board . __________________________________________________________________________________________ GS ISO 532 : 1975Ψ Published by GSA in 2006 Acoustics .060 4 Pages Gr 1 This standard specifies a method of determining the grammage of paper and board.Sampling 67. __________________________________________________________________________________________ GS ISO 542 : 1990Ψ Published by GSA in 2007 Oilseeds .10 Published by GSA in 2006 Belt Drives .Determination of Grammage 85.20 7 Pages Gr 1 This standard specifies methods of sampling oilseeds. Perforated Metal Plate and Electroformed Sheet 3 Pages Nominal Sizes of Openings Gr 1 This standard specifies the nominal sizes of openings for metal wire cloth. using an air oven. __________________________________________________________________________________________ GS ISO 605 : 1991Ψ 67.Micrographic Determination of the Apparent Grain Size 35 Pages Gr 4 This standard specifies a micrographic method of determining apparent ferritic or austenitic grain size in steels.Determination of Impurities. __________________________________________________________________________________________ GS ISO 636 : 2004Ψ 25.Classification 11 Pages Gr 2 This standard specifies requirements for classification of rods and wires in the as-welded condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.060 Published by GSA in 2008 Pulses .040.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 580 : 2005Ψ 23.Injection-moulded Thermoplastics Fittings Methods for Visually Assessing the Effects of Heating 6 Pages Gr 1 This standard specifies two methods for assessing the effects of heating on injection-moulded thermoplastics pipe fittings — method A.Chamfer Dimensions .40 Published by GSA in 2007 Surface Active Agents and Detergents . preloading. __________________________________________________________________________________________ GS ISO 643 : 2003Ψ 77. tolerances. length measurement.100. In case of disagreement.20 Published by GSA in 2006 Rolling Bearings . It covers dimensions. Attachments and Associated Chain Sprockets 28 Pages Gr 3 This standard specifies the characteristics of short-pitch precision roller and bush chains with associated sprockets suitable for the mechanical transmission of power and allied applications.Rods. and method B. It describes the methods of revealing grain boundaries and of estimating the mean grain size of specimens with unimodal size distribution __________________________________________________________________________________________ 124 . pastes or liquids. __________________________________________________________________________________________ GS ISO 606 : 2004Ψ 21. are given in other International Standards. __________________________________________________________________________________________ GS ISO 582 : 1995Ψ 21. Wires and Deposits for Tungsten Inert Gas Welding of Non-alloy and Fine-grain Steels .99 Published by GSA in 2007 Steels .Test Method Gr 1 This standard specifies methods not given in other standards for testing pulses which have not been processed and which are intended for human consumption or for animal feeding stuffs. using a liquid bath. __________________________________________________________________________________________ GS ISO 607 : 1980Ψ 71.100.20 Published by GSA in 2006 Welding Consumables . Size. and Species and 5 Pages Variety . Requirements for the maximum dimensions of the corresponding shaft and housing fillet radii are also given.160.220. Insects. method A is the reference method.Maximum Values 5 Pages Gr 1 This standard specifies the maximum chamfer dimensions of metric series rolling bearings.30 Published by GSA in 2006 Short-pitch Transmission Precision Roller and Bush chains. minimum tensile strengths and minimum dynamic strength.45 Published by GSA in 2006 Plastics Piping and Ducting Systems .Methods of Sample Division 7 Pages Gr 1 Specifies methods for obtaining a reduced sample of surface active agent or detergent suitable for use with single or mixed products in the form of powders. including chamfer minimum dimensions. for which boundary dimensions. Foreign Odours.040. __________________________________________________________________________________________ GS ISO 663 : 2007Ψ 67.200. __________________________________________________________________________________________ GS ISO 660 : 1996Ψ 67. The acidity is expressed preferably as acid value.Determination of Insoluble Impurities Content 7 Pages Gr 1 This standard specifies a method for the determination of the insoluble impurities content of animal and vegetable fats and oils.20 13 Pages Gr 2 This standard specifies a reference method for the determination of the hexane extract (or light petroleum extract).200.200. __________________________________________________________________________________________ GS ISO 664 : 1990Ψ Published by GSA in 2007 Oilseeds . It also defines the various categories of what are usually understood to be impurities.20 10 Pages Gr 1 This standard specifies a method for the determination of the impurities content in oilseeds used as primary industrial materials.200. or alternatively as acidity calculated conventionally.20 2 Pages Gr 1 This standard specifies the procedure for obtaining a test Sample from a laboratory Sample of oilseeds.Determination of Moisture and Volatile Matter Content 7 Pages Gr 1 This standard specifies two methods for the determination. __________________________________________________________________________________________ GS ISO 661 : 2003Ψ 67.200. called “oil content”. __________________________________________________________________________________________ GS ISO 659 : 1998Ψ Published by GSA in 2007 Oilseeds — Determination of Oil Content (Reference Method) 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 658 : 2002Ψ Published by GSA in 2007 Oilseeds — Determination of Content of Impurities 67.200.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .10 Published by GSA in 2006 Animal and Vegetable Fats and Oils -Determination of Acid Value and Acidity 8 Pages Gr 1 This standard specifies three methods (two titrimetric and one potentiometric) for the determination of acidity in animal and vegetable fats and oils.Preparation of Test Sample 2 Pages Gr 1 This standard specifies procedures for the preparation of a test sample from a laboratory sample of animal or vegetable fats and oils for the purpose of analysis __________________________________________________________________________________________ GS ISO 662 : 1998Ψ 67.10 Published by GSA in 2008 Animal and Vegetable Fats and Oils .10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . __________________________________________________________________________________________ 125 . of oil seeds used as industrial raw materials.200.Reduction of Laboratory Sample to Test Sample 67. by drying of the moisture and volatile matter content of animal or vegetable fats and oils. hereinafter referred to as fats. __________________________________________________________________________________________ GS ISO 669 : 2000Ψ 25.30 Published by GSA in 2006 Resistance Welding — Resistance Welding Equipment — Mechanical and Electrical 38 Pages Requirements Gr 3 This standard applies to resistance welding equipment.040 21 Pages Gr 3 The standard describes the procedures for the chemical analysis of cement. __________________________________________________________________________________________ GS ISO 677 : 1976Ψ 21.160. excluding compounded products. to guns with inbuilt transformers and to complete movable welding equipment.040 15 Pages Gr 2 Specifies a method of determining the compressive and flexural strengths of cement mortar __________________________________________________________________________________________ GS ISO 680 : 1990Ψ Published by GSA in 2005 Cement .Chemical Analysis 87.40 Published by GSA in 2008 Analysis of Soap .Modules and 1 Page Diametral Pitches Gr 1 This standard specifies modules and diametral pitches of straight bevel gears for general engineering and heavy engineering.20 8 Pages Gr 1 This standard specifies a method for the determination of the moisture and volatile matter content of oilseeds.180 Published by GSA in 2006 Straight Bevel Gears for General Engineering and Heavy Engineering . __________________________________________________________________________________________ GS ISO 678 : 1976Ψ 21.Determination of Strength 87.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 665 : 2000Ψ Published by GSA in 2007 Oilseeds — Determination of Moisture and Volatile Matter Content 67.100.Basic Rack 2 Pages Gr 1 This standard specifies the dimensional characteristics of the basic rack of straight bevel gears. for general engineering and heavy engineering.200.180 Published by GSA in 2006 Straight Bevel Gears for General Engineering and Heavy Engineering . __________________________________________________________________________________________ GS ISO 685 : 1975Ψ 71.Determination of Total Alkali Content and Total Fatty Matter Content 3 Pages Gr 1 This standard specifies a method for the simultaneous determination of the total alkalil) content and the total fatty matter content of soaps. having a constant bottom clearance. __________________________________________________________________________________________ GS ISO 679 : 1989Ψ Published by GSA in 2005 Methods of Testing Cements .Test Methods . __________________________________________________________________________________________ 126 . 40 Published by GSA in 2007 Surface Active Agents .Modified Ross. Chlorinated Poly(vinyl Chloride) (PVC-C) or Acrylonitrile/butadiene/styrene (ABS) with Plain Sockets for Pipes under Pressure —Part 1: Metric Series 6 Pages Gr 1 Specifies the dimensions of plain sockets (cylindrical and conical) in fittings made from unplasticized poly(vinyl chloride) (PVC-U). chemical.Determination of Apparent Density 3 Pages Method by Measuring the Mass of a given Volume. chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS).45 Published by GSA in 2006 Fittings made from Unplasticized Poly(Vinyl Chloride) (PVC-U).Washing Powders . __________________________________________________________________________________________ GS ISO 707 : 1997Ψ Published by GSA in 2006 Milk and Milk Products .40 Published by GSA in 2007 Surface Active Agents .20 Published by GSA in 2006 Machine Tools — Connecting Dimensions of Spindle Noses and Work holding Chucks 7 Pages Part 1: Conical Connection Gr 1 Specifies the sizes for interchangeability of tapered (type A) lathe spindle noses and corresponding connecting faces of face plates or work holding chucks.100.Guidance on Sampling 67. __________________________________________________________________________________________ 127 .060.01 36 Pages Gr 4 This standard gives guidance on methods of sampling milk and milk products for microbiological.Measurement of Foaming Power .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 696 : 1975Ψ 71. __________________________________________________________________________________________ GS ISO 727-1 : 2002Ψ 23. __________________________________________________________________________________________ GS ISO 702-1 : 2001Ψ 25. __________________________________________________________________________________________ GS ISO 701 : 1998Ψ Published by GSA in 2006 International Gear Notation — Symbols for Geometrical Data 01.Miles Method 5 Pages Gr 1 This standard specifies a method of measurement of the foaming power of a surface active agent __________________________________________________________________________________________ GS ISO 697 : 1981Ψ 71. physical and sensory analysis except for sampling of ex-farm milk from individual animals and sampling of milk within quality payment schemes. Gr 1 This standard specifies a method for the determination of the apparent density of washing powders by measuring the mass of a given volume. intended for connecting by solvent cementing to pipes of the corresponding material for use under pressure.100.100.080.30 4 Pages Gr 1 This standard specifies geometrical symbols for use in notation of gear data.040. 45 GS ISO 727-2 : 2005Ψ Published by GSA in 2006 Fittings made from Unplasticized Poly(vinyl Chloride) (PVC-U).Determination of Water .080. intended for connecting by solvent cementing to pipes of the corresponding material for use under pressure.Determination of Oil Content .200. chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/ butadiene/styrene (ABS). of meals (excluding compounded products) obtained by the extraction of oil from oilseeds by pressure or solvents.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 23.20 Published by GSA in 2007 Oilseed Residues. __________________________________________________________________________________________ GS ISO 750 : 1998Ψ 67.01 Published by GSA in 2006 Fruit and Vegetable Products .Insoluble Solids 4 Pages Gr 1 This standard specifies a method for the determination of the content of water-insoluble solids in the edible parts of fruit and vegetable products __________________________________________________________________________________________ GS ISO 762 : 2003Ψ 67. for the inch-based pipe series.040.01 Published by GSA in 2006 Fruit and Vegetable Products .080.Determination of Titratable Acidity 4 Pages Gr 1 This standard specifies two methods for the determination of the titratable acidity of fruit and vegetable products __________________________________________________________________________________________ GS ISO 751 : 1998Ψ 67.20 Published by GSA in 2007 Oilseed Meals — Determination of Oil Content 7 Pages Part 1: Extraction Method with Hexane (or Light Petroleum) Gr 1 This standard specifies a method for the determination of the hexane extract (or light-petroleum extract). __________________________________________________________________________________________ GS ISO 734-1 : 2006Ψ 67. __________________________________________________________________________________________ GS ISO 763 : 2003Ψ 67.200. called “oil content”.080. as well as to the pellets made from the residues.01 Published by GSA in 2006 Fruit and Vegetable Products .01 Published by GSA in 2006 Fruit and Vegetable Products . pellets and expeller cakes. Chlorinated Poly(vinyl Chloride) (PVC-C) or Acrylonitrile/butadiene/styrene (ABS) with Plain Sockets for Pipes under Pressure —Part 2: Inch-Based Series 7 Pages Gr 1 Specifies the dimensions.Determination of Mineral Impurities Content 5 Pages Gr 1 This standard specifies a method for the determination of the mineral impurities content of fruit and vegetable products. It is applicable to oilseed residues obtained from oilseeds by expelling or by extraction with a solvent. __________________________________________________________________________________________ GS ISO 734-2 : 1998Ψ 67.080.Determination of Ash Insoluble in Hydrochloric Acid 4 Pages Gr 1 This standard specifies a method for the determination of the hydrochloric-acid-insoluble ash yielded by fruit and vegetable products __________________________________________________________________________________________ 128 . in fittings made from unplasticized poly(vinyl chloride) (PVC-U). in millimetres.Part 2: Rapid Extraction Method 8 Pages Gr 1 This standard specifies an extraction method which may be used to assess the efficiency of a de-oiling process by comparing the oil content of the oilseed with the residual oil content of the corresponding extraction meals. of plain sockets (cylindrical and conical). designating prefixes to refrigerants.Methods of Analysis.01 3 Pages Gr 1 This standard specifies a method of sampling fresh fruits and vegetables.Radii under the Head 21.45 10 Pages Gr 1 This standard provides an unambiguous system for numbering and assigning composition. __________________________________________________________________________________________ GS ISO 857-1 : 1998Ψ 25.Designation System 71.160.160. with a view to determining the quality or particular characteristics of the goods __________________________________________________________________________________________ GS ISO 885 : 2000Ψ Published by GSA in 2006 General purpose Bolts and Screws . Tables listing the refrigerant designations are included.10 Published by GSA in 2006 Welding and Allied processes .40 Published by GSA in 2007 Surface Active Agents .10 2 Pages Gr 1 This standard specifies the sizes of the radii under the head and the transition diameters of metric series general purpose bolts and screws __________________________________________________________________________________________ GS ISO 893 : 1989Ψ 71. pitch and location of T-slots on platens for projection welding machines __________________________________________________________________________________________ GS ISO 874 : 1980Ψ Published by GSA in 2006 Fresh Fruits and Vegetables .30 Published by GSA in 2006 Slots in platens for projection welding machines 1 Page Gr 1 This standard specifies requirements for dimensions. __________________________________________________________________________________________ GS ISO 865 : 1981Ψ 25.060. and the bulk density of semi-rigid and flexible cellular plastics and rubbers.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 817 : 2005Ψ Published by GSA in 2008 Refrigerators .Vocabulary 82 Pages Part 1: Metal Welding Processes Gr 9 This standard defines metal welding processes and relating terms.080.Determination of Apparent (Bulk) Density 83. __________________________________________________________________________________________ 129 .100.Sampling 67.Technical Alkane Sulphonates .Metric Series . __________________________________________________________________________________________ GS ISO 845 : 2006Ψ Published by GSA in 2006 Cellular Plastics and Rubbers .100.100 4 Pages Gr 1 This standard specifies a method for determining the apparent overall density and the apparent core density of rigid cellular plastics. 6 Pages Gr 1 This standard specifies methods of analysis of technical alkane sulfonates. forming the subject of international trade. 2 This standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature.Titrimetric Method 3 Pages Gr 1 This standard specifies a titrimetric method for the determination of the total acidity of sulphuric acid for the for industrial use.Fine Pitch thread Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 898-2 : 1992Ψ 21.Entrainment Method 2 Pages Gr 1 This standard specifies a method for the determination.060.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .Determination of Extraneous Matter Content 67.060.20 Published by GSA in 2006 Mechanical Properties of Fasteners Part 2 : Nuts with specified proof load values . __________________________________________________________________________________________ GS ISO 898-6 : 1994Ψ 21. __________________________________________________________________________________________ GS ISO 934 : 1980Ψ 67.1 This standard specifies the mechanical properties of nuts with specified proof load values when tested at an ambient temperature range of + 10 *c to + 35 *c. __________________________________________________________________________________________ GS ISO 928 : 1997Ψ Published by GSA in 2006 Spices and Condiments .10 4 Pages Gr 1 This standard specifies a method for the determination of total ash from spices and condiments.10 1 Page Gr 1 This standard specifies a method for the determination of extraneous matter in spices and condiments.Determination of Total Acidity and Calculation of Free Sulphur Trioxide Content of Oleum . __________________________________________________________________________________________ GS ISO 904 : 1976Ψ 71.Determination of Total Acidity .Determination of Total Ash 67.30 Published by GSA in 2006 Sulphuric Acid and Oleum for Industrial Use . __________________________________________________________________________________________ GS ISO 927 : 1982Ψ Published by GSA in 2006 Spices and Condiments .Coarse thread 16 Pages Gr.220.220.30 Published by GSA in 2006 Hydrochloric Acid for Industrial Use .200.060.Determination of Water Content .20 Published by GSA in 2006 Mechanical Properties of Fasteners 9 Pages Part 6 : Nuts with specified proof load values . by entrainment.060. __________________________________________________________________________________________ 130 . __________________________________________________________________________________________ GS ISO 910 : 1977Ψ 71. of the water content of animal or vegetable fats or oils.Titrimetric 2 Pages Method Gr 1 This standard specifies a titrimetric method for the determination of the total acidity of hydrochloric acid for industrial use. Determination of Titre. The symbols established by this International Standard are to be used on diagrams in technical documentation.120.200.10 Published by GSA in 2006 Spices and Condiments . __________________________________________________________________________________________ GS ISO 952-4 : 1984Ψ 01. 67.10 3 Pages Gr 1 Specifies a method for the preparation of the water-insoluble fatty acids of animal and vegetable fats and oils and the determination of their solidification temperature. including poultry.1984-07-15 12 Pages Gr 2 This standard establishes the graphical symbols for elements of kinematic diagrams of products in all branches of industry.220.10 2 Pages Gr 1 This standard specifies a method of sampling spices and condiments.30 Published by GSA in 2006 Kinematic Diagrams .Graphical Symbols Part 4 : First edition .Determination of Moisture 4 Pages Content .10 Published by GSA in 2007 Meat and Meat Products .120. __________________________________________________________________________________________ GS ISO 936 : 1998Ψ Published by GSA in 2007 Meat and Meat Products . as well as in technical and educational literature. called conventionally the titre of the fat or oil. __________________________________________________________________________________________ GS ISO 937 : 1978Ψ 67.080.220.Determination of Nitrogen 3 Pages Content (Reference Method) Gr 1 This standard specifies a reference method for the determination of the nitrogen content of meat and meat products __________________________________________________________________________________________ GS ISO 939 : 1980Ψ 67.10 6 Pages Gr 1 This standard specifies a method for the determination of the total ash from all kinds of meat and meat products.220.Determination of Cold Water-soluble 2 Pages Extract Gr 1 This standard specifies a method for the determination of cold water-soluble extract in spices and condiments.Determination of Total Ash 67.Sampling 67. __________________________________________________________________________________________ 131 . __________________________________________________________________________________________ GS ISO 941 : 1980Ψ 67. __________________________________________________________________________________________ GS ISO 948 : 1980Ψ Published by GSA in 2006 Spices and Condiments .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 935 : 1988Ψ Published by GSA in 2006 Animal and Vegetable Fats and Oils .Entrainment Method Gr 1 This standard specifies an entrainment method for the determination of the moisture content of spices and condiments.10 Published by GSA in 2006 Spices and Condiments . Specification 4 Pages Gr 1 Specifies requirements for pimento or allspice (pimento dioica(L) Merr) whole or ground __________________________________________________________________________________________ GS ISO 1000 : 1992Ψ 01.10 Published by GSA in 2006 ISO General Purpose Metric Screw Threads .10 Published by GSA in 2005 Pimento (Allspice) (Pimenta Dioica (L) Merr).CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 67.Specification 67.Tolerances Part 3 : Deviations for Constructional Screw Threads 16 Pages Gr 2 The standard specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads . Whole.060 Published by GSA in 2006 SI Units and Recommendations for the Use of their Multiples and of Certain Other Units 22 Pages Gr 3 This standard describes the international systems of units. in pieces. __________________________________________________________________________________________ GS ISO 965-3 : 1998Ψ 21. recommends selected decimal multiples and sub-multiples of SI units for general use and gives certain other units which may be used with the international system of unit. __________________________________________________________________________________________ GS ISO 972 : 1997Ψ Published by GSA in 2005 Chillies and Capsicums. __________________________________________________________________________________________ GS ISO 973 : 1999Ψ 67.220. and a method for the determination of water content by azoetropic distillation __________________________________________________________________________________________ 132 .10 7 Pages Gr 1 Specifies requirements for chillies and capsicums in the whole or ground (powdered) form. It also quotes the definitions of the SI base units.220.220.040. __________________________________________________________________________________________ GS ISO 1003 : 1980Ψ 67. ) Whole or Ground .220.Specification 6 Pages Gr 1 Specifies requirements for ginger (Zingiber officinale Roscoe) whole.10 GS ISO 959-1 : 1998Ψ Published by GSA in 2005 Pepper ( Piper Nigrum L. in Pieces. whole or ground at specified commercial stages.10 Published by GSA in 2005 Spices and Condiments .Ginger.SpecificationPart 1. Whole or Ground .080. Whole or Ground ( Powdered ) . or ground __________________________________________________________________________________________ GS ISO 1026 : 1982Ψ 67. or Ground .Black Pepper 11 Pages Gr 2 Specifies requirements for black pepper ( piper nigrum L).Determination of Dry Matter Content by Drying under 4 Pages Reduced Pressure and of Water Content by Azeotropic Distillation Gr 1 This standard specifies a method for the determination of the dry matter content of fruit and vegetables products by dry under reduced pressure.01 Published by GSA in 2006 Fruits and Vegetable Products . V-belts and V-ribbed Belts.Technical Sodium Alkylaryl Sulphonates (Excluding Benzene 8 Pages Derivatives) .Covered Electrodes. __________________________________________________________________________________________ GS ISO 1089 : 1980Ψ 25. __________________________________________________________________________________________ GS ISO 1081 : 1995Ψ 23.20 Published by GSA in 2006 Welding Consumables . Rods and Tubular Cored Electrodes 14 Pages for fusion Welding of Cast Iron .100. electrode adaptors.Methods of Analysis. __________________________________________________________________________________________ GS ISO 1101 : 2004Ψ 01.Determination of Stability in Hard Water 71. wire electrodes for metal arc welding.160.40 Published by GSA in 2007 Surface Active Agents . electrode holders and similar parts.Determination of Non-volatile Ether Extract 67. V-ribbed belt drives. in tables 1. where the electrode forte Fmax given for diameter d.30 Published by GSA in 2006 Electrode Taper Fits for Spot Welding Equipment 3 Pages Dimensions Gr 1 This standard lays down the taper dimensions and tolerantes of electrode taper fits for spot welding electrode taps.01 Published by GSA in 2006 Belt Drives .100. rods for TIG-welding and rods for oxyfuel gas welding of unalloyed cast irons. and Corresponding Grooved Pulleys 15 Pages Vocabulary Gr 2 This standard defines terms relating toV-belt drives. Wires.40 3 Pages Gr 1 Specifies the method for assessing the stability on hard water of surface active agents which are readily soluble at ambient temperature or slightly higher temperature.20.10 Published by GSA in 2006 Geometrical Product Specifications (GPS) .160.040. __________________________________________________________________________________________ GS ISO 1071 : 2003Ψ 25. __________________________________________________________________________________________ GS ISO 1104 : 1977Ψ 71. 2 and 3 is not exceeded.040. V-ribbed belts and V-ribbed pulleys.10 2 Pages Gr 1 This standard specifies a method for the determination of the non-volatile ether extract in speices and condiments __________________________________________________________________________________________ 133 . __________________________________________________________________________________________ GS ISO 1108 : 1992Ψ Published by GSA in 2006 Spices and Condiments .Geometrical Tolerancing .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1063 : 1974Ψ Published by GSA in 2007 Surface Active Agents .100.Tolerances of Form. It represents the initial basis and defines the fundamentals for geometrical tolerancing. tubular cored electrodes for metal arc welding with and without a gas shield. Gr 1 This standard specifies methods of analysis of technical sodium alkylarylsulphonates. V-belts and V-grooved pulleys. Location and Run-out 54 Pages Gr 6 This standard contains basic information and gives requirements for the geometrical tolerancing of workpieces. as well as the corresponding symbols. 17.220. Orientation.Classification Gr 2 This standard specifies requirements for classification of covered electrodes for manual metal arc welding. __________________________________________________________________________________________ GS ISO 1122-1 : 1998Ψ 01.Cut Test 1 Pages Gr 1 This standard specifies the “cut test” for cocoa beans. Universal Systems for Designating Linear Density (Tex System) 59. __________________________________________________________________________________________ 134 . __________________________________________________________________________________________ GS ISO 1144 : 1973Ψ Published by GSA in 2008 Textiles.Rolling Bearings . __________________________________________________________________________________________ GS ISO 1133 : 2005Ψ 83. __________________________________________________________________________________________ GS ISO 1132-2 : 2001Ψ 21.Rolling Bearings .Tolerances Part 1 . number of filaments in filament yarns.040. __________________________________________________________________________________________ GS ISO 1139 : 1973Ψ Published by GSA in 2008 Textiles .080.Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics 16 Pages Gr 2 This standard specifies two procedures for the determination of the melt-flow rate (MFR) and the melt volume-flow rate (MVR).Designation of Yarns 59. folded. cabled or multiple wound. for each of the geometrical terms relative to gears. a standard definition which will be valid internationally.21.Measuring and Gauging Principles and 48Pages Methods Gr 5 This standard establishes guidelines for measurement of dimensions. The purpose is to outline the fundamentals of various measuring and gauging principles which may be used in order to clarify and comply with the definitions of ISO 1132-1 and ISO 5593. geometrical accuracy.Tolerances Part 2 . and number of folds.20 5 Pages Gr 1 This standard specifies two methods of indicating the composition of yarns. 21.Terms and definitions 64 Pages Gr 7 This standard defines terms used in International Standards specifying tolerances for boundary dimensions. The notation comprises linear density indicated in the text system.Definitions Related to Geometry 68 Pages Gr 7 This standard concerns the part of the international vocabulary of gears which is devoted solely to geometrical definitions. It gives.21 Published by GSA in 2006 Mechanical Engineering .00. direction and amount of twist.30 Published by GSA in 2007 Cocoa Beans .040.20 Published by GSA in 2006 Mechanical Engineering . the corresponding term in each language being chosen as far as possible in such a way as to directly reflect the meaning of the __________________________________________________________________________________________ GS ISO 1132-1 : 2000Ψ 01.080.200 Published by GSA in 2006 Vocabulary of Gear Terms Part 1 .01 7 Pages Gr 1 This standard gives the principles and recommended units of the Tex system for the expression of liner density and includes conversion table for calculating the tex values of numbers or counts in other systems together with a statement of the procedure for the implementation of the Tex system in trade and industry.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1114 : 1977Ψ 67. whether single.080.140. running accuracy and internal clearance of rolling bearings.20 Published by GSA in 2006 Plastics .. running accuracy and internal clearance for rolling bearings. __________________________________________________________________________________________ GS ISO 1211 : 1999Ψ Published by GSA in 2005 Milk .45 Published by GSA in 2006 Thermoplastics Pipes.Gravimetric Method (Reference Method) 67.040. partly skimmed milk and skimmed milk in which no appreciable separation or breakdown of fat due to lipolysis has occurred. __________________________________________________________________________________________ GS ISO 1207 : 1992Ψ Published by GSA in 2006 Slotted Cheese Head Screws .100.Boundary 9 Pages Dimensions and Tolerances Gr 1 The standard specifies the boundary dimensions and normal class tolerance for needle roller bearings of dimension series 48.20.20 Published by GSA in 2006 Rolling Bearings . 23.10 14 Pages Gr 2 This standard specifies the reference method for the determination of the fat content of milk. as well as powders.Acceptance Tests 23.20 4 Pages Gr 1 This standard specifies the characteristics of slotted cheese head screws of product grade A and with threads from Ml. Dimension series 48.6 to Ml0 inclusive.Product Grade A 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 23. 49 and 69 as given in ISO 15. 23. __________________________________________________________________________________________ GS ISO 1167-2 : 2006Ψ 23. Liquid Pyknometer Method and Titration Method 9 Pages Gr 1 This standard specifies three methods for the determination of the density of non-cellular plastics in the form of woid-free moulded or extruded objects.45 GS ISO 1167-1 : 2006Ψ Published by GSA in 2006 Thermoplastics Pipes.100. __________________________________________________________________________________________ 135 . Fittings and Assemblies for the Conveyance of Fluids 4 Pages Determination of the Resistance of Internal Pressure Part 2: Preparation of Pipe Test Pieces Gr 1 This standard specifies the dimensions and method for preparation of extruded. test pieces used to determine the resistance of thermoplastics pipes to internal hydrostatic pressure according to ISO 1167-1 __________________________________________________________________________________________ GS ISO 1183-1 : 2004Ψ 83.040.Determination of Content .080. 49 and 69 . It also specifies methods for testing liquid-ring type compressors as in annex A.20. __________________________________________________________________________________________ GS ISO 1217 : 1996Ψ Published by GSA in 2006 Displacement Compressors . or injection-moulded tubular. flakes and granules __________________________________________________________________________________________ GS ISO 1206 : 2001Ψ 21.01 Published by GSA in 2006 Plastics . Fittings and Assemblies for the Conveyance of Fluids Determination of the Resistance of Internal Pressure 8 Pages Part 1 : General Method Gr 1 This standard specifies a general test method for determining the resistance to internal hydrostatic pressure.Needle Roller Bearings.Methods for Determining the Density of Non-Cellular Plastics Part 1: Immersion Method.040. The method is applicable to raw and processed liquid milk.040.140 58 Pages Gr 6 This standard specifies methods for acceptance tests regarding volume rate of flow and power requirements of displacement compressors.100. 100. hoses are divided into four types according to the process by which they are manufactured. length measurement.70 Published by GSA in 2010 Rubber and plastics hoses — Hose sizes. reports. For this purpose.Definitions and Allowable Values of Deviations Relevant to Corresponding Flanks of Gear Teeth Gr 3 This standard establishes a system of accuracy relevant to corresponding flanks of individual cylindrical insolate gears.Indication of Surface Texture in Technical 46 Pages Product Documentation Gr 5 This standard specifies the rules for the indication of surface texture in technical product documentation e. __________________________________________________________________________________________ GS ISO 1340 : 1976Ψ 21.g. minimum and maximum inside diameters.220.200. tolerances. __________________________________________________________________________________________ GS ISO 1307 : 2006Ψ 23. drawings. the structure of the gear accuracy system and the allowable values of pitch deviations.200 Published by GSA in 2006 Cylindrical Gears . For each particular case they should be completed by such information as may be necessary or useful.040. The standard also specifies tolerances on cut-to-length rubber and plastics hoses for industrial and automotive applications. It specifies appropriate definitions for gear tooth accuracy terms.Information to be given to the Manufacturer by the Purchaser in 2 Pages order to obtain the gear required Gr 1 This standard specifies the information which should be stated on all cylindrical gear drawings.040.50 4 Pages Gr 1 This standard specifies the characteristics of split pins.060.20. attachments and associated chain sprockets for transmission and conveyors 21 pages Gr 3 This standard specifies requirements for double-pitch precision roller chains suitable for the mechanical transmission of power and for conveyors. total profile deviations and total helix deviations.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1234 : 1997Ψ Published by GSA in 2006 Split Pins 21.20 Published by GSA in 2006 Geometrical Product Specifications (GPS) . __________________________________________________________________________________________ GS ISO 1237 : 1981Ψ Published by GSA in 2005 Mustard Seed .10 11 Pages Gr 2 Specifies requirements for mustard seed __________________________________________________________________________________________ GS ISO 1275 : 2006Ψ 21. together with those for their associated sprockets. __________________________________________________________________________________________ GS ISO 1328-1 : 1995Ψ 21.040. It covers dimensions. 17. __________________________________________________________________________________________ 136 .00 Published by GSA in 2006 Cylindrical Gears . preloading and minimum tensile strengths. and 3Pages tolerances on cut-to-length hoses Gr 1 This standard specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. contracts by means of graphical symbols and textual indications. specifications.IS0 system of Accuracy 27 Pages Part 1. 53.20 Published by GSA in 2010 Double-pitch precision roller chains.Specification 67.30.220. __________________________________________________________________________________________ GS ISO 1302 : 2002Ψ 01. ) 71.040.Hydrostatic Testing 23.10 2 Pages Gr 1 This standard specifies a reference method for the determination of the total fat content of meat and meat products1 __________________________________________________________________________________________ 137 . Textile-Reinforced. for special agricultural machines or as collapsible water hoses.10 Published by GSA in 2007 Meat and Meat Products .120.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1341 : 1976Ψ 21. for washing-machine inlets. __________________________________________________________________________________________ GS ISO 1442 : 1997Ψ 67.100. __________________________________________________________________________________________ GS ISO 1342 : 2000Ψ Published by GSA in 2006 Oil of Rosemary (Rosmarinus officinalis L.200 Published by GSA in 2006 Straight Bevel Gears .040.40 Published by GSA in 2006 Rubber or Plastics-Coated Fabrics . __________________________________________________________________________________________ GS ISO 1443 : 1973Ψ Published by GSA in 2007 Meat and Meat Products . for General-Purpose Water Applications Specification 4 Pages Gr 1 This standard specifies the requirements for three types of general-purpose textile-reinforced rubber water hose with an operating temperature range of −25 °C to +70 °C and a maximum working pressure of up to 25 bar 1).120.Determination of Resistance to Penetration by 3 Pages Water Gr 1 This standard specifies a pass/fail method for the determination of the resistance of rubber-or-plastics-coated fabrics to water penetration when subjected to a specific hydrostatic pressure over a fixed period of time.080. These hoses are not intended to be used for conveyance of potable (drinking) water.).Information to be given to the Manufacturer by the Purchaser in Order to obtain the Gear 2 Pages Required Gr 1 This standard specifies the information which should be stated on all straight bevel gear drawings. For each particular case they should be completed by such information as may be necessary or useful.70 5 Pages Gr 1 This standard specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies __________________________________________________________________________________________ GS ISO 1403 : 2005Ψ 23. in order to facilitate assessment of its quality.80 8 Pages Gr 1 This standard specifies certain characteristics of oil of rosemary (Rosmarinus officinalis L.70 Published by GSA in 2006 Rubber Hoses. __________________________________________________________________________________________ GS ISO 1402 : 1994Ψ Published by GSA in 2006 Rubber and plastics Hoses and Hose Assemblies.Determination of Moisture Content (Reference Method) 4 Pages Gr 1 This standard specifies a reference method for the determination of the moisture content of meat and meat products. __________________________________________________________________________________________ GS ISO 1420 : 2001Ψ 59. as firefighting hoses.Determination of Total Fat Content 67. and to zinc alloys.120.Gravimetric 2 Pages Determination of the Mass Per Unit Area Gr 1 This standard specifies a method of determining the mass per unit area of hot dip galvanized coatings on ferrous materials.40 Published by GSA in 2006 Metallic and Oxide Coatings . In addition. it specifies requirements for copper plus nickel coatings applied to iron and steel.Hot Dip Galvanized Coatings on Ferrous Materials .40 Published by GSA in 2006 Metallic Coatings — Electrodeposited Coatings of Nickel Plus Chromium and of Copper 19 Pages Plus Nickel Plus Chromium Gr 2 This standard specifies the requirements for decorative. 25. and aluminium and aluminium alloys to provide an attractive appearance and enhanced corrosion resistance. electroplated nickel plus chromium.Electrodeposited Coatings of Nickel 26. steel.Determination of Free Fat Content 4 Pages Gr 1 This standard specifies a method for the determination of the free fat content of meat and meat products by means of extraction.Microscopical method 11 Pages Gr 2 This standard describes a method for the measurement of the local thickness of metallic coatings.2 to ST 9.220. __________________________________________________________________________________________ 138 .220. to zinc alloys.40 Published by GSA in 2010 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test 16 Pages methods Gr 2 This standard specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals) __________________________________________________________________________________________ GS ISO 1463 : 2003Ψ 26. __________________________________________________________________________________________ GS ISO 1460 : 1992Ψ 25.060.40 15 Pages Gr 2 This standard specifies requirements for nickel electrodeposited coatings that are applied to iron and steel. and porcelain or vitreous enamel coatings.220. copper and copper alloys. to copper and copper alloys.40 Published by GSA in 2006 Metallic Coatings . and to aluminium and aluminium alloys to provide an attractive appearance and corrosion resistance.10 Published by GSA in 2006 Slotted Pan Head Tapping Screws 3 Pages Gr 1 This standard specifies the characteristics of slotted pan head tapping screws with thread sizes from ST 2. zinc alloys. oxide layers.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1444 : 1996Ψ 67.20. by the microscopical examination of cross-sections using an optical microscope.10 Published by GSA in 2007 Meat and Meat Products .220.Measurement of coating thickness . and copper plus nickel plus chromium coatings on iron. __________________________________________________________________________________________ GS ISO 1458 : 2002Ψ Published by GSA in 2006 Metallic Coatings . __________________________________________________________________________________________ GS ISO 1481 : 1983Ψ 21.5 inclusive.220. __________________________________________________________________________________________ GS ISO 1456 : 2003Ψ 26. __________________________________________________________________________________________ GS ISO 1461 : 2009Ψ 25.220. Standard Panels for Testing 15 Pages Gr 2 Specifies several types of standard panel and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints. requirements and recommendations for the spatial orientation and direction of movement of controls and displays used in tool machines. ships.Surface. __________________________________________________________________________________________ GS ISO 1519 : 2002Ψ 87.30.10 Published by GSA in 2006 IS0 General-Purpose Metric Screw Threads .).Ballotini Method 2 Pages Gr 1 Specifies a method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components.1 and 4.5 inclusive.2 to ST 9. public utilities and the operational components of building facilities. __________________________________________________________________________________________ GS ISO 1514 : 2004Ψ 87.040 Published by GSA in 2005 Paints. Published by GSA in 2005 Paints and Varnishes .040.10 Published by GSA in 2006 Slotted Countersunk (flat) Head Tapping Screws (Common Head style) 3 Pages Gr 1 This standard specifies the characteristics of slotted countersunk (flat) head tapping screws with thread sizes from ST 2. industrial robots. varnishes and related products.Bend Test (Cylindrical Maudres) 8 Pages Gr 1 Specifies an empirical test procedure for assessing the resistance of a coating of paint. __________________________________________________________________________________________ GS ISO 1502 : 1996Ψ 17.10 Published by GSA in 2006 Slotted Raised Countersunk (Oval) Head Tapping Screws 3 Pages (Common Head Style) Gr 1 This standard specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2.040.060.040.060. procedures.Drying Test. transportation (automobiles.180 41 Pages Gr 5 This standard sets out design principles. etc. __________________________________________________________________________________________ GS ISO 1503 : 2008 Published by GSA in 2010 Spatial orientation and direction of movement — Ergonomic requirements 13. __________________________________________________________________________________________ GS ISO 1517 : 1973Ψ 87. aircraft. __________________________________________________________________________________________ 139 .Gauges and Gauging 27 Pages Gr 3 This standard gives details for the manufacture and use of gauges for checking IS0 general-purpose metric screw threads with a basic profile in accordance with IS0 68. railway electric cars/rolling stock. 21. office machines. earth-moving machinery. It specifies the features of the types of gauges (listed in 4.040 Published by GSA in 2005 Paints and Varnishes. daily commodities. information. varnish or related product to cracking and/or detachment from a metal or plastic substrate when subjected to bending round a cylindrical mandrel under standard conditions.5 inclusive __________________________________________________________________________________________ GS ISO 1483 : 1983Ψ 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1482 : 1983Ψ 21. and Varnishes .2) which are recommended for checking external and internal screw threads of work pieces and for the setting and checking of certain of the screw gauges.2 to ST 9. __________________________________________________________________________________________ GS ISO 1572 : 1980Ψ Published by GSA in 2007 Tea .140.10 2 Pages Gr 1 This standard specifies a method for the determination of the loss in mass when tea is heated in air at 103*c __________________________________________________________________________________________ GS ISO 1575 : 1987Ψ 67.insoluble ash __________________________________________________________________________________________ GS ISO 1577 : 1987Ψ 67. printing inks and related products.Determination of Water .Product Grade A 21.10 2 Pages Gr 1 This standard specifies a method for the determination of the alkalinity of water . varnishes.10 2 Pages Gr 1 This standard specifies a method for the determination of the water . for use in analytical determinations which require the results to be expressed on the dry basis __________________________________________________________________________________________ GS ISO 1573 : 1980Ψ Published by GSA in 2007 Tea .10 2 Pages Gr 1 It specifies a method of preparing a ground sampling of tea and of determining its dry matter content.140.140. Varnishes and Printing Inks .10 4 Pages Gr 1 This standard specifies the characteristics of slotted pan head screws of product grade A and with threads from Ml .140.040.140.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1524 : 2000Ψ Published by GSA in 2005 Paints.060.Determination of Total Ash 2 Pages Gr 1 This standard specifies a method for the determination of the total ash from tea __________________________________________________________________________________________ GS ISO 1576 : 1988Ψ Published by GSA in 2007 Tea .140.10 Published by GSA in 2007 Tea . 6 Pages Gr 1 This standards deals with the sampling and testing of paints.Determination of Loss in Mass at 103 *C 67.Soluble Ash 67.6 to Ml 0 inclusive.Insoluble Ash 67.Soluble Ash and Water .Determination of Fineness of Grind 87.soluble ash of tea __________________________________________________________________________________________ GS ISO 1580 : 1994Ψ Published by GSA in 2006 Slotted Pan Head Screws .Insoluble Ash 2 Pages Gr 1 This standard specifies a method for the determination of the acid .soluble ash and the water .Determination of Alkalinity of Water .Determination of Acid .insoluble ash from tea __________________________________________________________________________________________ GS ISO 1578 : 1975Ψ Published by GSA in 2007 Tea .Preparation of Ground Sample of known Dry Matter Content 67. __________________________________________________________________________________________ 140 .10 Published by GSA in 2007 Tea . and the groove profiles of corresponding fixed or variable diameter pulleys.Measurement of Volume Rate of Flow (Pumping Speed) 3 Pages Gr 1 This standard specifies methods of measuring the volume rate of flow of vapour vacuum pumps. __________________________________________________________________________________________ GS ISO 1628-2 : 1998Ψ 83.of vinyl chloride with one or more other monomers.Measurement of Performance Characteristics 3 Pages Part 2 .Measurement of Critical Backing Pressure Gr 1 This standard specifies a method of measuring the critical backing pressure of vapour vacuum pumps.160 Published by GSA in 2006 Vapour Vacuum Pumps . The pumps considered are those which discharge the gas against atmospheric pressure and which achieve a limiting inlet pressure of less than 100 Pal) in one stage. __________________________________________________________________________________________ GS ISO 1609 : 1986Ψ 23. but where vinyl chloride is the main __________________________________________________________________________________________ 141 . ejector pumps. It is applicable to resins in powder form which consist of homopolymers of the monomers vinyl chloride and copolymers.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1604 : 1989Ψ 21.Determination of the Viscosity of Polymers in Dilute Solution using Capillary Viscometers Part 2: Poly (vinyl Chloride) Resins 14 Pages Gr.2 This standard specifies conditions for the determination of the reduced viscosity(also known as viscosity number) and k-value of PVC resins.080. __________________________________________________________________________________________ GS ISO 1628-1 : 1998Ψ 83. The pumps considered comprise the following three classes of oil and mercury vapour pumps: diffusion pumps.Flange Dimensions 8 Pages Gr 1 This standard specifies the dimensions for flanges and collars used in vacuum technology.Measurement of Performance Characteristics Part 1. The dimensions ensure interchangeability between bolted.160 Published by GSA in 2006 Vapour Vacuum Pumps .220. terpolymers ect.Measurement of Performance Characteristics 3 Pages Part 1 . __________________________________________________________________________________________ GS ISO 1608-2 : 1989Ψ 23.Measurement of Volume Rate of Flow (Pumping Speed) Gr 1 This standard specifies methods of measuring the volume rate of flow of positive-displacement vacuum pumps.10 Published by GSA in 2006 Belt Drives . clamped and rotatable flanges.Endless Wide V-belts for Industrial Speed-Changers and Groove Profiles for Corresponding Pulleys 10 Pages Gr 1 This standard specifies the principal dimensions of endless wide V-belts for industrial Speed-changers..20 Published by GSA in 2006 Plastics .Part 1 : General Principles 17 Pages Gr 2 This standard specifies conditions for the determination of the reduced viscosity.080.20 Published by GSA in 2006 Plastics . __________________________________________________________________________________________ GS ISO 1607-1 : 1993Ψ 23. __________________________________________________________________________________________ GS ISO 1608-1 : 1993Ψ 23.160 Published by GSA in 2006 Positive-Displacement Vacuum Pumps .160 Published by GSA in 2006 Vacuum Technology .Determination of the Viscosity of Polymers in Dilute Solution using Capillary Viscometers . booster pumps. These pumps may be with or without baffle(s) or trap(s). 1 % (mass fraction) of salt.01 Published by GSA in 2005 Dried Milk and Dried Milk Products . dried whey.Condensed Milk . __________________________________________________________________________________________ GS ISO 1735 : 2004Ψ 67.Determination of Fat Content .20 4 Pages Gr 1 The standard specifies a method for the determination of the moisture content of starch using oven-drying at 130*c under atmospheric pressure.180. __________________________________________________________________________________________ GS ISO 1738 : 2004Ψ Published by GSA in 2005 Butter .100. dried whole.Determination of Fat Content.30 Published by GSA in 2005 Cheese and Processed Cheese Products. __________________________________________________________________________________________ GS ISO 1666 : 1996Ψ Published by GSA in 2007 Starch. The method is applicable to dried milk with a fat content of 40 % (mass fraction) or more.Oven.Determination of Moisture Content .20 4 Pages Gr 1 This standard specifies a reference method for the determination of the refractive index of the fat from butter. __________________________________________________________________________________________ GS ISO 1736 : 2000Ψ 67. dried partially skimmed.Determination of Fat Content 14 Pages Gravimetric Method (Reference Method) Gr 2 This standard specifies the reference method for the determination of the fat content of all types of evaporated milk and sweetened condensed milk (liquid sweetened and unsweetened concentrated milk).100.100.Gravimetric 15 Pages Method (Reference Method) Gr 2 This standard specifies the reference method for the determination of the fat content of all types of cheese and processed cheese products having lactose contents of below 5 % (mass fraction) of non-fat solids.100. __________________________________________________________________________________________ GS ISO 1737 : 1999Ψ 67. The method is applicable to all types of butter containing more than 0.100. __________________________________________________________________________________________ 142 .100. The methods described are related to the sub-clauses in ISO 1101 dealing with the “Profile tolerante of any line” and “Profile tolerante of any surface”.Drying Method 67.20 5 Pages Gr 1 Specifies a method for the determination of the salt content of butter. The method is applicable to native or modified starch in the dry form.Dimensioning and Tolerancing of Profiles 01.Gravimetric 14 Pages Method (Reference Method) Gr 2 Specifies the reference method for the determination of the fat content of dried milk and dried milk products.Determination of the Refractive Index of the Fat (Reference Method) 67. __________________________________________________________________________________________ GS ISO 1739 : 2006Ψ Published by GSA in 2005 Butter.20 5 Pages Gr 1 This standard describes the dimensioning and the geometrical tolerancing of profiled outlines and of profiled surfaces.Determination of Salt Content 67. and dried skimmed milk. dried buttermilk and dried butter serum.01 Published by GSA in 2005 Evaporated Milk and Sweetened .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1660 : 1987Ψ Published by GSA in 2006 Technical Drawings . __________________________________________________________________________________________ GS ISO 1817 : 2005Ψ Published by GSA in 2007 Rubber.30 Published by GSA in 2005 Milk Fat Products and Butter . and the test may be carried out at a specified internal pressure. irrespective of their method of production. the size of the apparatus for testing hoses and tubing of larger bore sizes becomes excessive.Bending Tests 6 Pages Gr 1 This standard specifies two methods for the determination of the behaviour of rubber or plastics hoses or tubing when bent to a specified radius.100.Electrical 12 Pages Conductivity of Antistatic Belts . __________________________________________________________________________________________ GS ISO 1741 : 1980Ψ Published by GSA in 2007 Dextrose.180. joined V-belts.20 Published by GSA in 2007 Glucose Syrup .20 Published by GSA in 2007 Glucose Syrups. The method also provides a means of measuring the force required to reach a specified bend radius.060 15 Pages Gr 2 This standard describes methods of evaluating the resistance of vulcanized rubbers to the action of liquids by measurement of properties of the rubbers before and after immersion in test liquids __________________________________________________________________________________________ 143 .220.180. Method A is suitable for hoses and tubing of internal diameter up to about 80 mm.10 Published by GSA in 2006 Belt Drives -V-ribbed Belts.20.Determination of Fat Acidity (Reference Method) 7 Pages Gr 1 This standard specifies a method for the determination of the acidity of the fat contained in milk fat products and in butter.Vacuum Oven Method 67. as well as corresponding production control and individual proof methods of measurements.Characteristics and Methods of Test Gr 2 This standard specifies the maximum electrical resistance of antistatic endless V-ribbed belts. __________________________________________________________________________________________ GS ISO 1813 : 1998Ψ 21. Vulcanized .Determination of the effect of Liquids 83.Determination of Loss in Mass on Drying.Determination of Dry Matter Content -Refractive Index Method 11 Pages Gr 2 This standard specifies a method for the determination of the dry matter content s of glucose syrups on the basis of their refractive index. and single V-belts including wide section belts and hexagonal belts.Determination of Dry Matter.180.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1740 : 2004Ψ 67. __________________________________________________________________________________________ GS ISO 1746 : 1998Ψ 23.040.70 Published by GSA in 2006 Rubber or Plastics Hoses and Tubing . 23.01.20 2 Pages Gr 1 This standard specifies a vacuum oven method for the determination of the loss in mass on drying of dextrose __________________________________________________________________________________________ GS ISO 1742 : 1980Ψ 67.100. __________________________________________________________________________________________ GS ISO 1743 : 1982Ψ 67.67.040.Vacuum Oven Method 2 Pages Gr 1 This standard specifies a vacuum oven method for the determination of the dry matter in glucose syrups. Joined V-belts and V-belts Including Wide Section Belts and Hexagonal Belts . __________________________________________________________________________________________ GS ISO 1842 : 1991Ψ Published by GSA in 2006 Fruit and Vegetable Products .10 3 Pages Gr 1 This standard specifies a method for the sampling of tea __________________________________________________________________________________________ GS ISO 1841-1 : 1996Ψ 67.Determination of pH 67.25 % (m/m). which may be used as the basis for specifications __________________________________________________________________________________________ 144 .120.100.Sampling 67.01 2 Pages Gr 1 The purpose of this Standard is to avoid an unnecessary multiplicity of tools and gauges by restricting selection still further and gutding the user towards preferred tolerance zones for shafts and holes to be used in constituting fits.01 2 Pages Gr 1 This standard specifies a potentiometric method of measuring the pH of fruit and vegetable products __________________________________________________________________________________________ GS ISO 1854 : 1999Ψ 67.040.Determination of Fat-Content .20 Published by GSA in 2007 Plastics . with sodium chloride contents equal to or greater than 0.Gravimetric Method ( Reference 14 Pages Method) Gr 2 This standard specifies the reference method for the determination of fat content of whey cheese.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1829 : 1975Ψ Published by GSA in 2006 Selection of Tolerance Zones for General Purposes 17.120.Polyethylene (PE) Moulding and Extrusion Materials Part 1 : Designation System and Basis for Specification 7 Pages Gr 1 This standard establishes a system of designation for polyethylene thermoplastic material. __________________________________________________________________________________________ GS ISO 1872-1 : 1993Ψ 83.10 Published by GSA in 2007 Meat and Meat Products . with sodium chloride contents equal to or greater than I.140.Determination of Chloride Content 4 Pages Part 1: Volhard Method Gr 1 This specifies a method for the determination of the chloride content of meat and meat products. including poultry.30 Published by GSA in 2005 Whey Cheese .10 Published by GSA in 2007 Meat and Meat Products .080.0 % (m/m). __________________________________________________________________________________________ GS ISO 1841-2 : 1996Ψ 67. including poultry.080.Determination of Chloride Content -Part 2: Potentiometric Method 4 Pages Gr 1 This standard specifies a method for the determination of the chloride content of meat and meat products. __________________________________________________________________________________________ GS ISO 1839 : 1980Ψ Published by GSA in 2007 Tea . recommended for use unless otherwise specified in the appropriate product standard.120. 21.Balance Quality Requirements for Rotors in a Constant (Rigid) 28 Pages StatePart 1. and terms concerning dental material and instruments . It also lays down the terminology of fasteners in English. and methods for verifying the residual unbalance.080.Specification and Verification of Balance Tolerances Gr 3 This standard gives specifications for rotors in a constant (rigid) state.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1872-2 : 2007Ψ 83. __________________________________________________________________________________________ 145 .11 Published by GSA in 2007 Dental VocabularyPart 4: Dental Equipment 10 Pages Gr 1 t defines terms used in dentistry.040.11 Published by GSA in 2007 Dental Vocabulary Part 2: Dental Materials 19 Pages Gr 2 It defines terms used in dentistry. __________________________________________________________________________________________ GS ISO 1940-1 : 2003Ψ 21. An alphabetical index is provided for each of the two languages. __________________________________________________________________________________________ GS ISO 1925 : 2001Ψ Published by GSA in 2006 Mechanical Vibration . a vocabulary on balancing. in English and in French. and terms concerning dental instruments and equipment .40 Published by GSA in 2006 Mechanical Vibration .01 40 Pages Gr 4 This International Standard providestranslation guidance forterms commonly used to describeThis standard provides translation guidance for terms commonly used to describe fasteners. terms relating to dental materials. 21.21.120. General and clinical terms.060.20 Published by GSA in 2007 Plastics .040.21. particularly those relating to dental materials. French and Russian. __________________________________________________________________________________________ GS ISO 1942-1 : 1989Ψ Published by GSA in 2007 Dental Vocabulary Part 1: General and Clinical Terms 01.Vocabulary 01. the necessary number of correction planes. particularly those relating to dental equipment. instruments and equipment __________________________________________________________________________________________ GS ISO 1942-2 : 1989Ψ 01.Polyethylene (PE) Moulding and Extrusion MaterialsPart 2 : Preparation of Test Specimens and Determination of Properties 8 Pages Gr 1 This standard specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials __________________________________________________________________________________________ GS ISO 1891 : 2009Ψ Published by GSA in 2010 Fasteners — Terminology 01. It specifies balance tolerances. __________________________________________________________________________________________ GS ISO 1942-4 : 1989Ψ 01.040.040.040. General and clinical terms.40 47 Pages Gr 5 This standard establishes.Balancing .11 16 Pages Gr 2 It defines general and clinical terms used in dentistry. 60 Published by GSA in 2006 Machine Tools .080 Published by GSA in 2006 Petroleum Products .Product Grade A 4 Pages Gr 1 This standard specifies the characteristics of slotted countersunk flat head screws of product grade A and with threads from M1. normal accuracy. __________________________________________________________________________________________ GS ISO 2049 : 1996Ψ 75. surface grinding machines with reciprocating table and vertical grinding wheel.040. __________________________________________________________________________________________ GS ISO 1996-2 : 2007Ψ 13.040. __________________________________________________________________________________________ GS ISO 2045 : 1988Ψ 23.Testing of the Accuracy 16 Pages Gr 2 This standard specifies both geometric and machining tests on general purpose.10 Published by GSA in 2006 Slotted Countersunk Flat Head Screws (Common Head Style) .140.6 to MIO inclusive.45 Published by GSA in 2006 Double-socket Fittings for Unplasticized Polyvinyl chloride (PVC-U) Pressure Pipes with 1 Page Elastic Sealing Ring Type Joints .Determination of Colour (ASTM SCALES) 5 Pages Gr 1 This standard specifies a method for visual determination of the colour of a variety of petroleum products.6 to MlO inclusive.Test Conditions for Surface Grinding Machines with Vertical Grinding Wheel Spindle and Reciprocating Table . __________________________________________________________________________________________ GS ISO 2048 : 1990Ψ 23. __________________________________________________________________________________________ GS ISO 2009 : 1994Ψ 21.Product Grade A 4 Pages Gr 1 This standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1. Recommendations are given regarding preferable conditions for measurement or calculation to be applied in cases where other regulations do not apply.Minimum 1 Page Depths of Engagement Gr 1 This standard specifies the minimum depths of engagement for Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints.060. with elastic sealing ring type joints and intended for the transport of fluids. by extrapolation of measurement results by means of calculation. such as lubricating oils.10 Published by GSA in 2006 Countersunk Slotted Raised Head Screws (Common Head Style) . __________________________________________________________________________________________ 146 . or exclusively by calculation.1 Published by GSA in 2010 Acoustics — Description. __________________________________________________________________________________________ GS ISO 2010 : 1994Ψ 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 1985 : 1998Ψ 26.080. diesel fuels and petroleum waxes. It is limited to products that do not contain artificial dyes.45 Published by GSA in 2006 Single Sockets for Unplasticized Poly(vinyl chloride) (PVC-U) and Chlorinated Polybinyl Chloride) (PVC-C) Pressure pipes with Elastic Sealing Ring Type Joints . heating fuels. measurement and assessment of environmental noise — 40 Pages Part 2: Determination of environmental noise levels Gr 4 This standard describes how sound pressure levels can be determined by direct measurement.060.Minimum Depths of Engagement Gr 1 This standard specifies the minimum depths of engagement for double-socket fittings for unplasticized PVC pressure pipes of up to 12 m in length.140: 17. intended as a basis for assessing environmental noise. IN addition.20.Zinc Aluminium and their 12 Pages Alloys Gr 2 This standard applies to thermal-sprayed metallic coatings for the protection of iron and steel against corrosion by applying zinc or aluminium or their alloys to uncoated surface to be protected __________________________________________________________________________________________ GS ISO 2064 : 1996Ψ 25.Metallic and other Inorganic Coatings . __________________________________________________________________________________________ 147 .040.10 13 Pages Gr 2 This standard establishes terminology relating specifically to plywood __________________________________________________________________________________________ GS ISO 2085 : 1976Ψ 25.220.060.79 .220.Definitions and Conventions Concerning the Measurement of Thickness 2 Pages Gr 1 This standard defines terms concerning the measurement of the thickness of metallic and other inoranic coatings on any substrate. in conformity .40 5 Pages Gr 1 Establishes a simplified classification of surface active agents. it specifies some general rules to be followed in the measurement of minimum thickness of coatings.Determination of Linear Density (Mass Per Unit Length) by the Skein Method 13 Pages Gr 2 This standard specifies a method for the determination of the linear density of all types of yarn in package form. __________________________________________________________________________________________ GS ISO 2131 : 1972Ψ Published by GSA in 2007 Surface Active Agents .Check of Continuity of Thin Anodic Oxide Coatings . the continuity of thin anodic Oxide coatings on aluminium and its alloys.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2060 : 1994Ψ 59.220.40 Published by GSA in 2008 Thermal Spraying .40 Published by GSA in 2008 Metallic and other Inorganic Coatings . 25.Vacabulary 01.220.Copper Sulphate Test 1 Page Gr 1 This standard specifies a method of checking. __________________________________________________________________________________________ GS ISO 2074 : 2007Ψ Published by GSA in 2011 Plywood . 71.Specification and Test Methods 25.220. by the topper sulphate test.40 8 Pages Gr 1 This standard specifies requirements for electroplated coatings of nominally pure tin on fabricated metal articles.Yarn from Packages .20. 25.100. 79.080.220.20 Published by GSA in 2006 Textiles . The coatings may be dull or bright as electroplated or may be flow-melted by fusion after electroplating. __________________________________________________________________________________________ GS ISO 2093 : 1986Ψ Published by GSA in 2006 Electroplated Coatings of Tin .Simplified Classification. regarding the arrangement of radicals with the scientific classification. with the exception of any yarn that may be the subject of a separate International Standard __________________________________________________________________________________________ GS ISO 2063 : 2005Ψ 25.20 Published by GSA in 2006 Anodizing of Aluminium and its Alloys . Determination of Cone 15 Pages Penetration Gr 2 This standard describes several methods for the empirical estimation of the consistency of lubricating greases and petrolatum by measuring the penetration of a standard cone __________________________________________________________________________________________ GS ISO 2143 : 1981Ψ 25. __________________________________________________________________________________________ GS ISO 2160 : 1998Ψ Published by GSA in 2006 Petroleum Products . __________________________________________________________________________________________ GS ISO 2164 : 1975Ψ Published by GSA in 2008 Pulses Determination of Glycosidic Hydrocyanic Acid 67. relative humidity.Corrosiveness to Copper .Dye Spot Test with Prior Acid Treatment Gr 1 This standard specifies a method of estimating.220.20 Published by GSA in 2006 Anodizing of Aluminium and its Alloys . details of which are given in the annex.080.). the loss of absorptive power of anodic oxide coatings that have undergone a sealing treatment. __________________________________________________________________________________________ GS ISO 2169 : 1981Ψ 67. a mercurimetric titration procedure may be used.080 11 Pages Gr 2 This standard specifies a method for the determination of the corrosiveness to copper of liquid petroleum products and certain solvents.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2135 : 1984Ψ 25.Definitions and Measurements 5 Pages Gr 1 This standard gives definitions of the physical factors usually employed in the industrial cold storage of fruits and vegetables (temperature.220. __________________________________________________________________________________________ GS ISO 2137 : 2007Ψ 75.Estimation of Loss of Absorptive Power of Anodic 3 Pages Oxide Coatings after Sealing . air-circulation ratio. of coloured anodic oxide coatings on aluminium and its alloys.Lubricating Grease and Petrolatum .20 Published by GSA in 2006 Anodizing of Aluminium and its Alloys . rate of air change. if no such compounds are present.Copper Strip Test 75.Part 3 .Accelerated Test of Light Fastness of Coloured Anodic Oxide Coatings using Artificial Light 2 Pages Gr 1 This standard specifies an accelerated test method for assessing the fastness.060 4 Pages Gr 1 This standard specifies a method for the determination of glycosidic hydrocyanic acid in pulses. Conversely.Springs . using artificial light. by dye absorption after acid pretreatment. etc.Physical Conditions in Cold Stores . __________________________________________________________________________________________ GS ISO 2162-3 : 1993Ψ Published by GSA in 2006 Technical Product Documentation . The method is generally applicable but may require modification if sulphides or certain other sulphur compounds are present. and provides useful information concerning their measurement __________________________________________________________________________________________ 148 .040 7 Pages Gr 1 This standard defines terms for the description of springs and their characteristics to be used in technical product documentation.01 Published by GSA in 2006 Fruits and Vegetables .100 Published by GSA in 2007 Petroleum Products .Vocabulary 01. __________________________________________________________________________________________ GS ISO 2233 : 2000Ψ 55.65 Published by GSA in 2006 Round Drawn Wire for General Purpose Non-alloy Steel Wire Ropes and for Large 12 Pages Diameter Steel Wire Ropes -Specifications Gr 2 This standard specifies round non-alloy steel drawn wires to be used in the manufacture of general purpose steel wire ropes as defined in GS ISO 2408.140.large diameter steel wire ropes as defined in ISO 8369.220.Determination of Dropping Point 6 Pages Gr 1 It specifies a method for the determination of the dropping point of lubricating grease __________________________________________________________________________________________ GS ISO 2178 : 1982Ψ 25.Refractometric Method 8 Pages Gr 1 This standard specifies a refractometric method for the determination of the soluble in fruit and vegetable products __________________________________________________________________________________________ GS ISO 2174 : 1990Ψ Published by GSA in 2007 Surface Active Agents . Filled Transport Packages and Unit Loads .160.40 Published by GSA in 2006 Packaging .Pyknometric Method 67.50 Published by GSA in 2007 Non . __________________________________________________________________________________________ 149 .Preparation of Water with known Calcium Hardness 71.080.40 4 Pages Gr 1 This standard specifies a method of preparing water of known calcium hardness for use in testing surface active agents and products containing them.Determination of Soluble Solids .Magnetic Coatings on Magnetic Substrates .Contitions for Testing 4 Pages Gr 1 This standard specifies a method for the conditioning of complete. transport packages and unit loads.20 3 Pages Gr 1 This standard specifies a pyknometric method for the determination of the soluble solids content of fruit juice __________________________________________________________________________________________ GS ISO 2173 : 2003Ψ 67.destructive measurement of the thickness of non .180. .01 Published by GSA in 2006 Fruit and Vegetable Products .Lubricating Grease .magnetic coatings __________________________________________________________________________________________ GS ISO 2232 : 1990Ψ 77.Measurement of Coating Thickness Magnetic Method 4 Pages Gr 1 This standard specifies the method of using coating thickness instruments of the magnetic type for non .100 Published by GSA in 2007 Petroleum Products .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2172 : 1983Ψ Published by GSA in 2006 Fruit Juice . filled.Determination of Soluble Solids Content .100.Complete. __________________________________________________________________________________________ GS ISO 2176 : 1995Ψ 75. ) In the whole and ground/powdered forms __________________________________________________________________________________________ GS ISO 2256 : 1984Ψ 67.) Merr.M. et L.Specification 67. using a static load. Mentha Viridis Linnaeus) Specification 3 Pages Gr 1 Specifies requirements for leaves of dried mint (spearmint) in whole. Filled Transport Packages and Unit Loads .Complete.40 Published by GSA in 2006 Packaging .220. __________________________________________________________________________________________ 150 .220.10 Published by GSA in 2005 Dried Mint (Spearmint) ( mintha Spicata Linnaeus Syn.Horizontal Impact Tests 8 Pages Gr 1 This standard specifies methods of horizontal impact testing (horizontal or inclined plane test and pendulum test) on a complete.180. Filled Transport Packages and Unit Loads . filled transport package.40 Published by GSA in 2006 Packaging .) Whole or Ground (Powdered ) Specification 4 Pages Gr 1 Specifies the requirements for coriander (Coriandum sativum L. filled transport packages or unit loads using sinusoidal excitation at fixed frequency. which is used as a flavouring ingredient in the preparation of foods and is traded internationally __________________________________________________________________________________________ GS ISO 2254 : 2004Ψ Published by GSA in 2005 Cloves.Stacking Tests using a Static Load 4 Pages Gr 1 It specifies three methods for carrying out a stacking test on a complete.220.Vibration Tests at Fixed Low Frequency 5 Pages Gr 1 This standard specifies methods to carry out vibration tests on complete.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2234 : 2000Ψ 55.10 L.Specification 67. __________________________________________________________________________________________ GS ISO 2253 : 1999Ψ Published by GSA in 2005 Curry Powder .10 6 Pages Gr 1 Specifies requirements for whole and ground (powdered) cloves (Syzygium aromaticum (L.220. filled transport package or a unit load __________________________________________________________________________________________ GS ISO 2247 : 2000Ψ 55. __________________________________________________________________________________________ GS ISO 2244 : 2000Ψ 55180. Perry ) __________________________________________________________________________________________ GS ISO 2255 : 1996Ψ Published by GSA in 2005 Coriander (Coriandrum Sativum 67.Complete.40 Published by GSA in 2007 Packaging .10 12 Pages Gr 2 Specifies the requirements for curry powder. Whole and Ground (Powdered) . Filled Transport Packages and Unit Loads . or on a unit load. broken or rubbed form.Complete.180. Unhardened 3 Pages Gr 1 This standard specifies the characteristics of unhardened taper Pins.140.6 mm to 50 mm inclusive. __________________________________________________________________________________________ GS ISO 2291 : 1980Ψ Published by GSA in 2007 Cocoa Beans.Determination of Total Phosphorus 3 Pages Content (Reference Method) Gr 1 This standard specifies a reference method for the determination of the total phosphorus content of meat and meat products. the mass per unit area of the coating and the mass per unit area of the substrate cloth of a rubber-or plastics-coated fabric.40 GS ISO 2286-2 : 1998Ψ Published by GSA in 2006 Rubber or Plastics .50 3 Pages Gr 1 This standard specifies the characteristics of parallel pins of unhardened steel and austenitic stainless steel.20 19 Pages Gr 2 This standard specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It relates to the sampling of cocoa beans packed in sacks. __________________________________________________________________________________________ GS ISO 2294 : 1974Ψ 67. with metric dimensions and nominal diameters.140. __________________________________________________________________________________________ GS ISO 2320 : 2008Ψ Published by GSA in 2010 Prevailing torque type steel nuts — Mechanical and performance properties 21. __________________________________________________________________________________________ GS ISO 2338 : 1997Ψ Published by GSA in 2006 Parallel Pins.060.Determination of Roll Characteristics Part 2: Methods for Determination of Total Mass Per Unit Area.30 5 Pages Gr 1 This standard specifies general conditions relating to sampling for the assessment of the quality of cocoa beans. __________________________________________________________________________________________ 151 .120.060.Coated Fabrics .Sampling 67. of Unhardened Steel and Austenitic Stainless Steel 21. from 0.6 to 50 mm inclusive. Mass Per Unit Area of 6 Pages Coating and Mass Per Unit Area of Substrate Gr 1 This standard describes methods of determining the total mass per unit area. with nominal diameters d from 0.Determination of Moisture Content (Routine Method) 67. It includes a single test to determine the prevailing torque properties (performance properties) and/or the torque/clamp force properties.50 Published by GSA in 2006 Taper Pins. d. __________________________________________________________________________________________ GS ISO 2292 : 1973Ψ Published by GSA in 2007 Cocoa Beans . It also gives the procedure to be followed for sampling cocoa beans in bulk.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 59.10 Published by GSA in 2007 Meat and Meat Products .060.080. __________________________________________________________________________________________ GS ISO 2339 : 1986Ψ 21.30 2 Pages Gr 1 This standard specifies a routine method for the determination of the moisture content of cocoa beans. 040.Reference block for the calibration of equipment for ultrasonic examination 1 Pages Gr 1 This standard specifies the characteristics of the reference block used for the calibration of equipment for ultrasonic examination of welds in steel.10 4 Pages Gr 1 This standard specifies the characteristics of slotted headless screws with shank with threads from M1 up to and including M10.060. d.50 4 Pages Gr 1 This standard specifies the characteristics of clevis pins without head. __________________________________________________________________________________________ GS ISO 2401 : 1972Ψ 25.Amplitude-sensitive Eddy Current Method 11 Pages Gr 2 This standard describes a method for non-destructive measurements of the thickness of nonconductive coatings on non-magnetic.160. __________________________________________________________________________________________ GS ISO 2341 : 1986Ψ Published by GSA in 2006 Clevis Pins with Head 21.70 Published by GSA in 2010 Rubber hoses.Determination of the Efficiency.15 to 6.50 4 Pages Gr 1 This standard specifies the characteristics of clevis pins with head. textile-reinforced. depending on the type and category. __________________________________________________________________________________________ GS ISO 2342 : 2003Ψ Published by GSA in 2006 Slotted Headless Screws with Shank 21. __________________________________________________________________________________________ GS ISO 2360 : 2003Ψ 25.060.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2340 : 1986Ψ Published by GSA in 2006 Clevis Pins without Head 21. using amplitude-sensitive eddy current instruments.220. from 3 to 100 mm inclusive. with metric dimensions and nominal diameters.3 mm __________________________________________________________________________________________ 152 . __________________________________________________________________________________________ GS ISO 2398 : 2006Ψ 23.160. for 5 Pages compressed air — Specification Gr 1 This standard specifies the requirements for three types. up to a maximum working pressure of 25 bar1) with an operating-temperature range of – 40 °C to + 70 °C. d. three classes and two categories of textile-reinforced rubber hose for compressed air. weld metal recovery and deposition coefficient of carbon steel and low alloy high tensile steel covered electrodes in the sizes 3.20 Published by GSA in 2006 Covered Electrodes . 3 Pages Metal Recovery and Deposition Coefficient Gr 1 This standard specifies a method for the determination of the efficiency.060. with metric dimensions and nominal diameters. __________________________________________________________________________________________ GS ISO 2400 : 1972Ψ 25. electrically conductive (generally metallic) basis materials. from 3 to 100 mm inclusive.40 Published by GSA in 2006 Welds in steel .20 Published by GSA in 2006 Non-conductive Coatings on Non-magnetic Electrically Conductive Basis Materials Measurement of Coating Thickness . guidance on the determination of the appropriate capacity of the milk pipette and on the determination of the corrections to apply to the results if the milk is not of average fat content __________________________________________________________________________________________ GS ISO 2447 : 1998Ψ Published by GSA in 2006 Fruit and Vegetable Products . comparative tests. certification marks __________________________________________________________________________________________ GS ISO 2411 : 2000Ψ Published by GSA in 2006 Rubber.01 6 Pages Gr 1 This standard specifies a method for the chemical determination of ethanol in fruit and vegetable products __________________________________________________________________________________________ 153 .080.Determination of Coating Adhesion 59.080. __________________________________________________________________________________________ GS ISO 2410 : 1973Ψ 97. __________________________________________________________________________________________ GS ISO 2446 : 1976Ψ Published by GSA in 2005 Milk .Methods of test for the Information of the Consumer 2 Pages Gr 1 This standard specifies test methods for household refrigerators. including lifting equipment such as cranes and hoists.Determination of Ethanol Content 67.Determination of Fat Content (Routine Method) 67.or Plastics-Coated Fabrics . and gives corresponding permissible deviations which apply.140.40 11 Pages Gr 2 This standard specifies a method of determining the coating adhesion strength of coated fabrics __________________________________________________________________________________________ GS ISO 2423 : 1982Ψ 25.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2408 : 2004Ψ Published by GSA in 2006 Steel Wire Ropes for General Purposes .40 Published by GSA in 2006 Acceptance Conditions for Radial Drilling Machines with the Arm Adjustable in Height Testing of Accuracy 9 Pages Gr 1 This standard describes.10 7 Pages Gr 1 This standard specifies a routine method (the gerber method) for the determination of the fat content of milk.Minimum Requirements 77. for use as a technical basis for the following activities.Determination of Tin Content 67.040.86 35 Pages Gr 4 This standard specifies minimum requirements for the manufacture and testing of stranded steel wire ropes for general purposes.30 Published by GSA in 2008 Household Refrigerators .01 4 Pages Gr 1 This standard specifies a method for the determination of tin content in fruit and vegetable products __________________________________________________________________________________________ GS ISO 2448 : 1998Ψ Published by GSA in 2006 Fruit and Vegetable Products .080. both geometrical and practical tests on general purpose and normal accuracy radial drilling machines with the arm adjustable in height.100.080. information labels. Test Method and Parameters 5 Pages Gr 1 This standard specifies a method for determining the longitudinal reversion of thermoplastics pipes. accessories and their joints for the construction of pipelines to convey water (e. due to lipolysis and sour cream in which no appreciable separation or breakdown of fat. processed and sour cream in which no appreciable separation or breakdown of fat. Accessories and their Joints for Water or Gas Applications 46 Pages Gr 5 This standard specifies the requirements and test methods applicable to ductile iron pipes. Board and Pulps .Series of Angles and Slopes on Prisms 9 Pages Gr 1 This standard specifies two series of prism angles from 120° to 0° 30' and a series of prism slopes from 1:10 to 1:500.5 to 40 module.060 Published by GSA in 2006 Paper . __________________________________________________________________________________________ GS ISO 2531 : 1998Ψ 77. for liquefied petroleum gases (LPG). papers and boards __________________________________________________________________________________________ GS ISO 2490 : 2007Ψ 21. __________________________________________________________________________________________ GS ISO 2538 : 1998Ψ 17.200 Published by GSA in 2010 Solid (monobloc) gear hobs with tenon drive or axial keyway. __________________________________________________________________________________________ GS ISO 2503 : 1998Ψ 25. for general mechanical engineering purposes. 16 Pages Cutting and Allied Processes up to 300 bar Gr 2 It specifies requirements for single or two-stage pressure regulators for connections to gas cylinders normally used for compressed gases up to 300 bar(30 Mpa) for dissolved acetylene.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2450 : 1999Ψ 67.75 Published by GSA in 2006 Ductile Iron Pipes. __________________________________________________________________________________________ 154 .01 Published by GSA in 2006 Geometrical Product Specifications (GPS) .20 Published by GSA in 2006 Thermoplastics Pipes .5 to 40 module — Nominal dimensions 10 Pages Gr 1 This standard specifies the nominal dimensions of general-purpose single-start solid (monobloc) gear hobs with axial keyway or tenon drive of 0.Measurement of diffuse Blue Reflectance Factor (ISO Brightnees) 9 Pages Gr 1 This standard specifies a method for measuring the diffuse blue reflectance foctor of pulp. potable water) or gas. methylacetylene-propadiene-mixtures (MPS) and carbon dioxide ©2) used in welding.69 Published by GSA in 2005 Cream . __________________________________________________________________________________________ GS ISO 2505 : 2005Ψ 23. fittings.Gravimetric Method (Reference Method) 14 Pages Gr 2 This standard specifies the reference method for the determination of the fat content of raw. __________________________________________________________________________________________ GS ISO 2470 : 1999Ψ 85. to be carried out in either a liquid or in air. 0.100. operated with or without pressure. due to lipolysis.040.30 Published by GSA in 2006 Gas Welding Equipment .Longitudinal Reversion . has occurred. installed below or above ground.140.Pressure Regulators for Gas Cylinders used in Welding. cutting and allied processes.g.040.160. Fittings.Determination of Fat Content . 160 Published by GSA in 2006 Mechanical Vibration and Shock .Evaluation of Human Exposure to Wholebody Vibration 11 PagesPart 2 . __________________________________________________________________________________________ GS ISO 2631-2 : 2003Ψ 13.2 to ST8 __________________________________________________________________________________________ GS ISO 2762 : 1973Ψ 71.Geometrical Tolerancing .Classification Gr 3 This standard specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 or a minimum tensile strength of up to 570 N/mm2.100. __________________________________________________________________________________________ GS ISO 2692 : 1988Ψ Published by GSA in 2006 Technical Drawings .30 Published by GSA in 2006 Hydrochloric Acid for Industrial Use .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2553 : 1992Ψ 01. Brazed and Soldered Joints . __________________________________________________________________________________________ GS ISO 2631-1 : 1997Ψ 13.Symbolic Representation on Drawings 50 Pages Gr 5 This standard prescribes the rules to be applied for the symbolic representation of welded.10 Published by GSA in 2006 Heat-treated Steel Tapping Screws .160.Covered Electrodes for Manual Metal Arc Welding of Non-Alloy 28 Pages and Fine Grain Steels . The use of the maximum material principle facilitates manufacture without disturbing the free assembly of parts where there is a mutual dependence of size and geometry. __________________________________________________________________________________________ GS ISO 2702 : 1992Ψ 21. __________________________________________________________________________________________ GS ISO 2560 : 2002Ψ 25.Vibration in Buildings (1 Hz to 80 Hz) Gr 2 This standard concerns human exposure to whole-body vibration and shock in buildings with respect to the comfort and annoyance of the occupants.20 Published by GSA in 2006 Welding Consumables .160 Published by GSA in 2006 Mechanical Vibration and Shock . brazed and soldered joints on drawings.Mechanical Properties 3 Pages Gr 1 This standard specifies the characteristics of heat-treated steel tapping screws.060.General Requirements Gr 4 This standard defines methods for the measurement of periodic. It specifies a method for measurement and evaluation. It indicates the principal factors that combine to determine the degree to which a vibration exposure will be acceptable. with tapping screw thread from ST2. random and transient whole-body vibration.Evaluation of Human Exposure to Whole-body 31 Pages Vibration Part 1.20 Published by GSA in 2006 Welded.060.Turbidimetric Method Gr 1 3Pages This standard specifies a turbidimetric method for the determination of soluble sulphates in hydrochloric acid for industrial use.Determination of Soluble Sulphates . comprising the determination of the measurement direction and measurement location.100. __________________________________________________________________________________________ 155 .Maximum Material Principle 01.20 28 Pages Gr 3 This standard defines and describes the maximum material principle and specifies its application. Part 1. and gives the corresponding permissible deviations which apply.10 5 Pages Gr 1 This standard specifies the dimensions and tolerances applicable to sintered bearings for the following ranges of inside diameters __________________________________________________________________________________________ GS ISO 2810 : 2004Ψ 87.10 Published by GSA in 2010 Belt drives — V-belts for the automotive industry and corresponding pulleys — 7 Pages Dimensions Gr 1 This standard specifies the requirements for belts and pulleys for V-belt drives used for driving auxiliaries of internal combustion engines for the automotive industry.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2768-1 : 1989Ψ 17.40 Published by GSA in 2006 Test Conditions for Box Type Vertical Drilling Machines 3 Pages Testing of the Accuracy .060.10 Published by GSA in 2006 General Tolerances .10 Published by GSA in 2006 General Tolerances .Tolerances for linear and angular dimensions without individual tolerance indications 3 Pages Gr 1 This standard is intended to simplify drawing indications and it specifies general tolerances for linear and angular dimensions without individual tolerance indications in four tolerance classes.40 Published by GSA in 2006 Test Conditions for Box Type Vertical Drilling Machines 3 Pages Testing of the Accuracy . both geometrical and practical tests on general purpose and normal accuracy box type vertical drilling machines. __________________________________________________________________________________________ GS ISO 2772-2 : 1974Ψ 25.100.Part 2 : Practical Test Gr 1 This standard specifies the practical test to be carried out for checking box type vertical drilling machines. __________________________________________________________________________________________ 156 .Testing of the accuracy .040.Part 1 .geometrical tolerances for features without individual tolerance indications Tolerance Indications Gr 1 8 Pages This standard is intended to simplify drawing indications and specifies general geometrical tolerances to control those features on the drawing which have no respective individual indication. test conditions for box type vertical drilling machines .Geometrical Tests Gr 1 This standard describes. __________________________________________________________________________________________ GS ISO 2772-1 : 1973Ψ 25. It specifies general geometrical tolerances in three tolerance classes.040.Part 2 .Dimensions and Tolerances 21.080. __________________________________________________________________________________________ GS ISO 2790 : 2004Ψ 43.Natural Weathering and Coatings.040 Published by GSA in 2005 Paints and Varnishes . __________________________________________________________________________________________ GS ISO 2795 : 1991Ψ Published by GSA in 2006 Plain Bearings .080. __________________________________________________________________________________________ GS ISO 2768-2 : 1989Ψ 17.Exposure and Assessment 11 Pages Gr 2 This standard specifies the conditions which need to be taken into consideration in the selection of the type of natural weathering and the natural weathering procedure to be used to determine the resistance of coatings or coating systems (direct weathering or weathering behind window glass).Sintered Bushes . 60° and 85° 8 Pages Gr 1 This standards deals with the sampling and testing of paints. __________________________________________________________________________________________ GS ISO 2825 : 1981Ψ 67.00 Published by GSA in 2005 Paints and Varnishes . __________________________________________________________________________________________ GS ISO 2812-2 : 2006Ψ 87.99 Published by GSA in 2006 End-suction Centrifugal Pumps (rating 16 bar) .Part 1: General Methods 5 Pages Gr 1 This standard deals with the sampling and testing of paints. dried at normal air temperatures and applied at approximately equal wet film thickness to black and white substrates. varnishes and related products are subject to revision. __________________________________________________________________________________________ GS ISO 2814 : 1973Ψ 87.Part 2: Water Immersion 4 Pages Methods Gr 1 Deals with the sampling and testing of paints. from a laboratory sample obtained by the method specified in GS IS0 948. of reflectance factor greater than 40 %.Determination of Resistance to Liquids .10 Published by GSA in 2006 Spices and Condiments . Gr 9 This standard specifies generic skip-lot sampling procedures for acceptance inspection by attributes.Determination of Specula Gloss on Non-Metallic Films at 20°.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 87.040 GS ISO 2812-1 : 1993Ψ Published by GSA in 2005 Paints and Varnishes .120. varnishes and related products.30 Published by GSA in 2006 Sampling Procedures for Inspection by Attributes Pt I: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot by Lot 87 Pages Inspection. __________________________________________________________________________________________ GS ISO 2858 : 1975Ψ 23.040 Published by GSA in 2005 Paints and Varnishes .Determination of Resistance to Liquids . 2 Pages Nominal Duty Point and Dimensions Gr 1 This standard specifies the principal dimensions and nominal duty Point of end-suction centrifugal pumps having a maximum operating rating of 16 bar) __________________________________________________________________________________________ GS ISO 2859-1 : 1999Ψ 03. and parties to agreements based on this International Standard are encouraged.Designation.Preparation of a Ground Sample for Analysis 1 Page Gr 1 This standard specifies a method of preparing a ground sample of spice or condiment for analysis. __________________________________________________________________________________________ 157 . __________________________________________________________________________________________ GS ISO 2813 : 1994Ψ 87. varnishes and related products.060. It specifies general methods for determining the resistance of a single-coat film or a multi-coat system of paints or related products to the action of liquids.Comparison of Contrast Ratio (Hiding Power) of Paints of the 2 Pages Same Type and Colour Gr 1 This standard specifies the standard method to be used in comparing the contrast ratios given by paint films of white or light colours.040. The purpose of these procedures is to provide a way of reducing the inspection effort on products of high quality submitted by a supplier who has a satisfactory quality assurance system and effective quality controls.040 Published by GSA in 2006 Paints and Varnishes .220. 180. filled transport package __________________________________________________________________________________________ GS ISO 2901 : 1993Ψ 21. filled transport package or a unit load to water spray or the protection it gives to its contents from water spray.160 Published by GSA in 2006 Vacuum Technology .40 2 Pages Gr 1 This standard specifies methods for conducting rolling tests on a complete.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 03. as well as those of the “0” rings and the insert which are associated with these tailpieces to ensure coupling tightness.Screwed Type Gr 1 This standard specifies the dimensions of quick-release couplings of the screwed type as used in vacuum technology. as well as those of the “0” rings and their carriers which are associated with these couplings to ensure vacuum tightness. Filled Transport Packages and Unit Loads . __________________________________________________________________________________________ GS ISO 2875 : 2000Ψ 55.Spray Test 5 Pages Gr 1 This standard specifies methods for testing the resistance of a complete.120.Dimensions 6 Pages Part 2 .Clamped type Gr 1 This standard specifies the dimensions of quick-release couplings of the clamped type as used in vacuum technology.30 GS ISO 2859-2 : 1985Ψ Published by GSA in 2006 Sampling Procedures for Inspection by Attributes .040. __________________________________________________________________________________________ GS ISO 2859-3 : 2005Ψ 03.40 Published by GSA in 2006 Packaging . __________________________________________________________________________________________ GS ISO 2876 : 1985Ψ Published by GSA in 2006 Packaging . __________________________________________________________________________________________ 158 .Pt 2: Sampling Schemes Indexed by Limiting Quality (LQ) for Isolated Lot Inspection.Complete.Water .Rolling Test 55.160 Published by GSA in 2006 Vacuum Technology . Filled Transport Packages . __________________________________________________________________________________________ GS ISO 2861-1 : 1974Ψ 23.Quick-release Couplings .180. __________________________________________________________________________________________ GS ISO 2861-2 : 1980Ψ 23.Dimensions 2 Pages Part I .30 Published by GSA in 2006 Sampling Procedures for Inspection by Attributes .Basic Profile and Maximum Material Profiles 5 Pages Gr 1 This standard specifies the basic profile and maximum material profiles of ISO metric trapezoidal screw threads.Quick Release Couplings .Pt 3: Skip Lot Sampling Procedures 29 Pages Gr 3 This standard specifies the generic skip-lot sampling procedures for acceptance inspection by attributes.Complete.120. 21 Pages Gr 3 This standard establishes LQ sampling plans and procedures for inspection by attributes compatible with ISO 2859-1 that can be used when lots are of an isolated nature.10 Published by GSA in 2006 ISO Metric Trapezoidal Screw Threads . __________________________________________________________________________________________ GS ISO 2904 : 1977Ψ Published by GSA in 2006 ISO Metric Trapezoidal Screw Threads . such as lubricating oils.Basic Dimensions 21.10 6 Pages Gr 1 This standard specifies the reference method for measuring the pH of all kinds of meat and meat products.Determination of Nitrite Content 3 Pages (Reference Method) Gr 1 This standard specifies a reference method for the determination of the nitrite content of meat and meat products. from their kinematic viscosities __________________________________________________________________________________________ GS ISO 2917 : 1999Ψ Published by GSA in 2007 Meat and Meat Products — Measurement of pH — Reference method 67.10 10 Pages Gr 1 This standard specifies a tolerance system for metric trapezoidal screw threads in accordante with GS ISO 2902. The method is applicable to products which may be homogenized and also to non-destructive measurements oncarcass meat.040.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2902 : 1977Ψ Published by GSA in 2006 ISO Metric Trapezoidal Screw Threads . __________________________________________________________________________________________ GS ISO 2903 : 1993Ψ Published by GSA in 2006 ISO Metric Trapezoidal Screw Threads .Tolerances 21.120.120.Calculation of Viscosity Index from Kinematic Viscosity 9 Pages Gr 1 This standard describes two procedures for calculating the viscosity index (VI) of petroleum products and related materials.30 4 Pages Gr 1 Specifies a reference method for the determination of the dry matter of whey cheese. quarters and muscles.10 2 Pages Gr 1 This standard specifies a series of diameter and pitch combinations for ISO metric trapezoidal screw threads having the basic profile according to GS ISO 2901.080 Published by GSA in 2006 Petroleum Products . __________________________________________________________________________________________ 159 .040.100. __________________________________________________________________________________________ GS ISO 2918 : 1975Ψ 67. __________________________________________________________________________________________ GS ISO 2909 : 2002Ψ 75. including poultry.General Plan 21. The tolerances refer to the basic profile in GS ISO 2901.040.10 6 Pages Gr 1 This standard specifies the basic dimensions for ISO metric trapezoidal screw threads according to GS ISO 2902. __________________________________________________________________________________________ GS ISO 2920 : 2004Ψ Published by GSA in 2005 Whey Cheese -Determination of Dry Matter (Reference method) 67.10 Published by GSA in 2007 Meat and Meat Products . It provides a standardized series from which to choose values applied to individual fluid power systems and/or components. It can be used either to verify the fabrication integrity of a filter element (by checking the absence of bubbles) or to permit the localization of the largest pore of the filter element by determining the first bubble point.120.100.200 .20 Published by GSA in 2006 Anodizing of Aluminium and Its Alloys . __________________________________________________________________________________________ GS ISO 2943 : 1998Ψ 23.220.01 Published by GSA in 2006 Fluid Power Systems and Components .100.Integrated Conversion Table for Replacing Traditional Yarn Numbers by Rounded Values in the Tex System 13 Pages Gr 2 This standard is intended to facilitate the changeover by industry and commerce from traditional yarn numbering systems to the tex system __________________________________________________________________________________________ GS ISO 2953 : 1999Ψ 21.60 Published by GSA in 2006 Hydraulic Fluid Power .080.01 Published by GSA in 2008 Textiles .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 2928 : 2003Ψ 75.40 Published by GSA in 2006 Rubber Hoses and Hose Assemblies for Liquefied Petroleum Gas (LPG) in the Liquid or 12 Pages Gaseous Phase and Natural Gas up to 25 Bar (2. It stresses the importance attached to the form in which the balancing machine characteristics should be specified by the manufacturers and also outlines criteria and tests for evaluating balancing machines. by measurement of the admittance or the impedance. by verifying the ability of the filter element to maintain its collapse burst rating after being subjected to the designated system fluid at a high and/or low temperature.100.Assessment of Quality of Sealed Anodic Oxide 3 Pages Coatings by Measurement of Admittance or Impedance Gr 1 This standard specifies a method for assessing the quality of sealed anodic Oxide coatings on aluminium and its alloys. __________________________________________________________________________________________ GS ISO 2942 : 2004Ψ 23.5 MPA) .Verification of Material Compatibility with 5 Pages Fluids Gr 1 This standard specifies a method of verifying the compatibility of materials comprising a hydraulic fluid power filter element with a designated fluid.Filter Elements .Specification Gr 2 This standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures __________________________________________________________________________________________ GS ISO 2931 : 1983Ψ 25.30 Published by GSA in 2006 Hydraulic Fluid Power .40 Published by GSA in 2006 Mechanical Vibration . __________________________________________________________________________________________ 160 .Balancing Machines — Description and Evaluation 55 Pages Gr 6 This standard gives requirements for the evaluation of the performance and characteristics of machines for balancing rotating components.140. 83. __________________________________________________________________________________________ GS ISO 2947 : 1973Ψ 59.Nominal Pressures 4 Pages Gr 1 This standard specifies a series of nominal pressures from which to choose values used in other International Standards related to fluid power.Filter Elements — Verification of Fabrication Integrity and 7 Pages Determination of the First Bubble Point Gr 1 This standard specifies a bubble-point test method applicable to filter elements used in hydraulic fluid power systems. __________________________________________________________________________________________ GS ISO 2944 : 2000Ψ 23. e. The sleeves are manufactured in accordance with ISO 2982.20 GS ISO 2982-2 : 2001Ψ Published by GSA in 2006 Rolling Bearings . it recommends dimensions and tolerances for thrust washers.20 Published by GSA in 2006 Rolling Bearings .080 4 Pages Gr 1 This standard specifies a method for the determination of the cloud point of petroleum products which are transparent in layers 40 mm in thickness and have a cloud point below 49 *C. Thrust Washers 6 Pages Boundary Dimensions and Tolerances Gr 1 This standard specifies the boundary dimensions and tolerances for thrust needle roller and cage assemblies.20 Published by GSA in 2006 Rolling Bearings .Determination of the Grammage of the Component Papers 2 Pages after Separation Gr 1 This standard specifies a method for determining the grammage of the individual papers from which corrugated fiberboard has been made __________________________________________________________________________________________ GS ISO 3040 : 1990Ψ Published by GSA in 2006 Technical Drawings . __________________________________________________________________________________________ GS ISO 3015 : 1992Ψ Published by GSA in 2007 Petroleum Products .100.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 21. which can be used either as shaft or housing washers __________________________________________________________________________________________ GS ISO 3038 : 1975Ψ 85. i.Dimensioning and Tolerancing . __________________________________________________________________________________________ GS ISO 3031 : 2000Ψ 21.Thrust Needle Roller and Cage Assemblies.Radial Needle Roller and Cage Assemblies . In addition.Dimensions and 4 Pages Tolerances Gr 1 This standard specifies the boundary dimensions for needle roller and cage radial assemblies.20 6 Pages Gr 1 This standard establishes the definition of cones and specifies the graphical Symbol to be used for their indication and methods for their dimensioning and tolerancing.Dimensions 8 Pages Gr 1 This standard specifies dimensions for locknuts and locking devices for tapered sleeves and for threaded shafts.00 Published by GSA in 2006 Corrugated Fiberboard . and gives preferred dimensions to be used.060.Determination of Cloud Point 75.Accessories Part 2 : Locknuts and Locking Devices . raceway members.060.100.Cones 01. __________________________________________________________________________________________ GS ISO 3030 : 1996Ψ 21. Furthermore. it gives the tolerances for the width of cages and method of checking free operation.00 Published by GSA in 2007 Corrugated Fiberboard . __________________________________________________________________________________________ 161 .100.Determination of the Water Resistance of the Glue Bond by 4 Pages Immersion Gr 1 This standard specifies an immersion method for determining the water resistance of the glue bond of corrugated fiberboard __________________________________________________________________________________________ GS ISO 3039 : 1975Ψ 85. numerals and marks for use on technical drawings and associated documents.01 Published by GSA in 2006 Technical Product Documentation .100. __________________________________________________________________________________________ 162 .120.100. __________________________________________________________________________________________ GS ISO 3098-2 : 2000Ψ 01.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3069 : 2000Ψ 23. The method is applicable to textiles in any form.20 Published by GSA in 2006 Machine Tools .Lettering 5 Pages Part 3 : Greek Alphabet Gr 1 This standard specifies use of the Greek alphabet as symbols in technical drawings and associated documents.Dimensions and Tolerances 21.Needle Rollers .Lettering Part 2 : Latin Alphabet.Test Conditions for Self-Centering. __________________________________________________________________________________________ GS ISO 3089 : 2005Ψ 25. __________________________________________________________________________________________ GS ISO 3096 : 1996Ψ Published by GSA in 2006 Rolling Bearings . It primarily concerns letters written with the aid of stencils.060. including those conforming to ISO 2858. __________________________________________________________________________________________ GS ISO 3098-3 : 2000Ψ 01.10 Published by GSA in 2007 Meat and Meat Products . to be used with horizontal end-suction centrifugal pumps. but is equally applicable to freehand lettering or other appropriate methods. with reference to ISO 230-1. __________________________________________________________________________________________ GS ISO 3071 : 2005Ψ Published by GSA in 2005 Textiles .100. mechanical seals suitable for straight shafts.Determination of pH of the Aqueous Extract 59. __________________________________________________________________________________________ GS ISO 3091 : 1975Ψ 67.Dimensions of Cavities for Mechanical Seals and for Soft Packing 10 Pages Gr 1 This standard specifies the dimensions of the seal cavity for step-balanced mechanical seals.01 Published by GSA in 2006 Technical Product Documentation .01 4 Pages Gr 1 This standard specifies a method for determining the pH of the aqueous extract of textiles. and for soft packing.20 5 Pages Gr 1 This standard specifies dimensions and tolerances for finished steel needle rollers used as rolling elements. It primarily concerns letters written with the aid of stencils.080. manually-operated chucks for machine tools with more than two jaws. the geometric tests and corresponding tolerances for self-centering.080 Published by GSA in 2006 End-suction Centrifugal Pumps . but is equally applicable to freehand lettering or other appropriate methods.Determination of Nitrate Content 5 Pages (Reference Method) Gr 1 This standard specifies a reference method for the determination of the nitrate content of meat and meat products. Numerals and Marks 5 Pages Gr 1 This standard specifies the Latin alphabet. Manually-Operated Chucks with One12 Pages piece Jaws Gr 2 This standard specifies. v.Transparent and Opaque Liquids . __________________________________________________________________________________________ GS ISO 3103 : 1980Ψ Published by GSA in 2006 Tea . both transparent and opaque.Titrimetric 3 Pages Method Gr 1 This standard specifies a titrimetric method for the determination.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3098-4 : 2000Ψ 01. Steel wire ropes for general purposes characteristics. __________________________________________________________________________________________ GS ISO 3188 : 1978Ψ 67. __________________________________________________________________________________________ GS ISO 3108 : 1974Ψ 77.080 Published by GSA in 2006 Petroleum Products .10 4 Pages Gr 1 This standard specifies a method for the preparation of a liquor of tea for use in sensory tests. It also gives the relation to be observed between the diameter of the shaft and the section of the key.140.Preparation of Liquor for use in Sensory Tests 67. These sockets are not suitable for use in conjunction with locked coil and spiral Strands.20 Published by GSA in 2007 Starch and Derived Products .120.30 2 Pages Gr 1 This standard specifies the dimensional characteristics of tangential keys and of their corresponding keyways in shaft and hub.180.In starches and derived products to which nitrogenous materials have not been added.01 Published by GSA in 2006 Technical Product Documentation . the nitrogen is present essentially in the form of Protein and/or amino acids. __________________________________________________________________________________________ GS ISO 3117 : 1977Ψ Published by GSA in 2006 Tangential Keys and Keyways 21.Determination of Actual Breaking Load 1 Page Gr 1 This standard specifies a method of tensile test to destruction for determining the actual breaking load of steel wire ropes for general purposes as given in ISO 2408.Determination of Nitrogen Content by the Kjeldahl Method . by means of infusing the leaf __________________________________________________________________________________________ GS ISO 3104 : 1994Ψ 75. by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. of liquid petroleum products.Determination of Kinematic 13 Pages Viscosity and Calculation of Dynamic viscosity Gr 2 This standard specifies a procedure for the determination of the kinematic viscosity.140. __________________________________________________________________________________________ 163 .100. by the Kjeldahl method.Ol % (mlm)NOTE .Lettering Part 4 : Diacritical and Particular Marks for the LatinAlphabet 7 Pages Gr 1 This standard specifies diacritical and particular marks for the Latin alphabet for use together with the characters shown in ISO 3098-2. of the nitrogen content of starch and its derived products whose presumed nitrogen content is greater than 0.65 Published by GSA in 2006 Steel Wire Ropes for General Purposes .65 Published by GSA in 2006 Sockets for Wire Ropes for General 6 Pages Part 1 : General Characteristics and of Acceptance Gr 1 This standard lays down the dimensions necessary for interchangeability and specifies prototype test requirements and quality control of steel sockets for use with steel wire ropes within the nominal diameter range of 8 to 60 mm.140. __________________________________________________________________________________________ GS ISO 3189-1 : 1985Ψ 77. Cast and Pressed Housings for insert Bearings 8 Pages Gr 1 This standard specifies boundary dimensions and tolerances for cast and pressed housings for insert bearings for which boundary dimensions are given in ISO 9628.080. __________________________________________________________________________________________ GS ISO 3248 : 1998Ψ 87. __________________________________________________________________________________________ GS ISO 3189-3 : 1985Ψ 77.65 GS ISO 3189-2 : 1985Ψ Published by GSA in 2006 Sockets for Wire Ropes for General Purposes Part 2: Special Requirements for Sockets Produced by Forging or Machined from theSolid Gr 1 2 Pages This standard specifies the special requirements for materials and method of manufacture of sockets produced by forging or by machining from the solid. __________________________________________________________________________________________ GS ISO 3210 : 1983Ψ 25.Testing of the Accuracy 11 Pages Gr 2 This standard describes.20 Published by GSA in 2006 Anodizing of Aluminium and its Alloys .220.140. cracking and/or detachment from the substrate under conditions of moderately elevated temperature __________________________________________________________________________________________ 164 .Assessment of Quality of Sealed Anodic Oxide Coatings by Measurement of the Loss of Mass after Immersion in Phosphoric-chromic Acid Solution Gr 1 3 Pages This standard specifies a method for assessing the quality of sealed anodic coatings on aluminium and its alloys by measurement of the loss of mass after immersion in phosphoric-chromic acid Solution.65 Published by GSA in 2006 Sockets for Wire Ropes for General Purposes 3 Pages Part 3: Special Requirements for Sockets Produced by Casting Gr 1 This standard specifies the special requirements for materials.Assessment of 2 Pages Resistance of Anodic Oxide Coatings to Cracking byDeformation Gr 1 This standard specifies an empirical method for assessing the resistance of anodic Oxide coatings to cracking by deformation which these coatings may undergo. __________________________________________________________________________________________ GS ISO 3228 : 1993Ψ 21. general quality control and conditions of acceptance are dealt with in ISO 3189/1. prototype test requirements. __________________________________________________________________________________________ GS ISO 3211 : 1977Ψ 25. varnishes or related products to changes in gloss and/or colour.040 Published by GSA in 2005 Paints and Varnishes . method of manufacture and quality control of sockets produced by casting. general quality control and conditions of acceptance are dealt with in ISO 3189/1. critical dimensions.20 Published by GSA in 2006 Rolling Bearings .100. The general characteristics. blistering. The general characteristics. both geometrical and practical tests on general purpose and normal accuracy turret and single spindle co-ordinate drilling machines with vertical spindle and the corresponding permissible deviations which apply.220.140. prototype test requirements.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 77. __________________________________________________________________________________________ GS ISO 3190 : 1975Ψ 25.20 Published by GSA in 2006 Anodizing of Aluminium and its Alloys .40 Published by GSA in 2006 Test Conditions for Turret and Single Spindle Co-ordinate Drilling Machines with Vertical Spindle . critical dimensions.Determination of the Effect of Heat 4 Pages Gr 1 It specifies a general procedure for determining the resistance of single coatings or multi-coat systems of paints. Hose Connections for Equipment for Welding. with the manual procedure being the referee method in cases of dispute.01. Cutting and 7 Pages Allied Processes Gr 1 This standard lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for equipment for welding.20 Published by GSA in 2006 Fluid Power Systems and Components . 87. unless otherwise agreed.20 Published by GSA in 2005 Paints.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3251 : 2003Ψ 83.Transport Packages 55.080. based on the standard plan dimension (module) __________________________________________________________________________________________ GS ISO 3405 : 2000Ψ 75. material.100. binders for paints and varnishes.020.20 Published by GSA in 2006 Gas Welding equipment .060.Determination of Non-Volatile Matter Content 6 Pages Gr 1 Specifies a method for determining the non-volatile-matter content by mass of paints.080 3 Pages Gr 1 This standard sets forth a series of dimensions for rigid rectangular transport packages.060. These eyebolts may be used for vertical and inclined lifting.Determination of Distillation Characteristics at Atmospheric 33 Pages Pressure Gr 4 This standard specifies a laboratory method for the determination of the distillation characteristics of light and middle distillates derived from petroleum with initial boiling points above 0oC and end points below approximately 400oC.040. lifting capacity and conditions of use of lifting eyebolts. utilizing either manual or automated equipment. __________________________________________________________________________________________ GS ISO 3394 : 1984Ψ Published by GSA in 2007 Dimensions of Rigid Rectangular Packages . __________________________________________________________________________________________ GS ISO 3320 : 1987Ψ 23. etc __________________________________________________________________________________________ GS ISO 3253 : 1998Ψ 25. polymer dispersions and condensation resins such as phenolic resins (resols.Acceptance Inspection 21.160.080 Published by GSA in 2006 Petroleum Products . 87. __________________________________________________________________________________________ GS ISO 3269 : 2000Ψ Published by GSA in 2006 Fasteners . __________________________________________________________________________________________ 165 . novolak solutions. varnishes.Cylinder Bores and Piston Rod Diameters 2 Pages Metric series Gr 1 This standard establishes a metric series of cylinder bores and Piston rod diameters for application to hydraulic and pneumatic fluid power cylinders. cutting and allied processes __________________________________________________________________________________________ GS ISO 3266 : 1984Ψ Published by GSA in 2006 Eyebolts for General Lifting Purposes 53.30 7 Page Gr 1 This standard specifies the basic dimensions. Varnishes and Plastics .01 17 Pages Gr 2 This standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or rejected in cases where no other such procedure was agreed with the supplier at the time the fasteners were ordered. tees.Van Gulik Method 67.60 Published by GSA in 2006 Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes 2 Pages Metric Series . and the inside diameters of the backing flange for unplasticized polyvinyl chloride (PVC) pressure pipes. Gr 1 Specifies an iodometric method for the determination of the sulphur dioxide content of sulpuric acid and oleums for industrial use.60 Published by GSA in 2006 Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes . __________________________________________________________________________________________ GS ISO 3460 : 1975Ψ 23.Determination of Sulphur Dioxide Content 3 Pages .Ray Spectrometric Methods 18 Pages Gr 2 This standard specifies methods for measuring the thickness of metallic coatings by the use of X .X .040. tolerances and generally used grades of non-alloy. __________________________________________________________________________________________ GS ISO 3497 : 2000Ψ 25.100. 90’ and 1800). __________________________________________________________________________________________ GS ISO 3423 : 1975Ψ 71.220.Test of Resistance to Pull Out 2 Pages Gr 1 This standard specifies a method for checking the ability of assembled joints (excluding fusion-welded joints) between f fittings and polyethylene (PE) pressure pipes to withstand Iongitudinal tensile Stresses. It is applicable to meat and meat products containing less than 0. concentric and eccentric reducers. including poultry.040.40 17 Pages Gr 2 This standard specifies the dimensions.ray spectrometric methods __________________________________________________________________________________________ GS ISO 3501 : 1976Ψ 23.10 5 Pages Gr 1 This standard specifies a method for the determination of the hydroxyproline content of all kinds of meat and meat products.Dimensions of Adapter for Backing Flange Gr 1 This standard lays down the main dimensions of adapters for solvent (cold) welding.40 Published by GSA in 2006 Metallic Coatings . caps and stub ends with quality requirements as used for piping work. __________________________________________________________________________________________ GS ISO 3433 : 1975Ψ Published by GSA in 2005 Cheese.Determination of Hydroxyproline Content 67.30 4 Pages Gr 1 This standard describes the Van Gulik method for the determination of the fat content of cheese.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3419 : 1981Ψ Published by GSA in 2006 Non-alloy and Alloy Steel Butt-welding Fittings 23.060. __________________________________________________________________________________________ GS ISO 3496 : 1994Ψ Published by GSA in 2007 Meat and Meat Products .Determination of Fat Content Fat .120. low-alloy and alloy steels for butt-welding bends (type 2D (90” and 180°) and 30 (45O.5 % (m/m) hydroxyproline.Measurement of Coating Thickness .30 Published by GSA in 2006 Sulphuric Acid and Oleum for Industrial Use .Iodometric Method.040. __________________________________________________________________________________________ 166 . __________________________________________________________________________________________ GS ISO 3530 : 1979Ψ 23.60 Published by GSA in 2006 Assembled Joints Between Fittings and Polyethylene (PE) Pressure Pipes .Mass-spectrometer-type Leak detector 10 Pages Calibration Gr 1 This standard specifies procedures to be used for the calibration of mass-spectrometer-type leak detectors. tolerantes. It deals only with leak detectors which have an integral high vacuum System to maintain the sensing element (mass spectrometer tube) at a low pressure.10 Published by GSA in 2008 Aluminium and Aluminium Alloys .Castings . __________________________________________________________________________________________ GS ISO 3522 : 2007Ψ 77.General plan.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3503 : 1976Ψ 23.30 Published by GSA in 2006 Heavy-duty Cranked-link Transmission Chains 11 Pages Gr 2 This standard specifies dimensions.220.040.040.160 Published by GSA in 2006 Vacuum Technology . and with IS0 262. ISO general purpose metric screw threads .Symbols for use in Specifications 4 Pages Part 3 . __________________________________________________________________________________________ GS ISO 3509 : 2005Ψ Published by GSA in 2007 Coffee and Coffee Products — Vocabulary 01. for cranked-link or offset sidebar roller chains suitable for the mechanical transmission of power and allied applications under onerous conditions.060.67 .Test of Leakproofness under Internal 2 Pages Pressure when subjected to Bending Gr 1 This standard specifies a method for checking the leakproofness under internal pressure of assembled joints (excluding fusion-welded joints) between mechanical fittings and polyethylene (PE) pressure pipes when subjected to bending.20 21 Pages Gr 3 This standard defines the most commonly used terms relating to coffee and products __________________________________________________________________________________________ GS ISO 3512 : 1992Ψ 21. /SO general purpose metric screw threads . __________________________________________________________________________________________ GS ISO 3545-3 : 1989Ψ 23.lt defines the calculation methods for the average bending radius and how to perform this __________________________________________________________________________________________ GS ISO 3508 : 1976Ψ 21.Selected sizes for screws. __________________________________________________________________________________________ 167 .01 Published by GSA in 2006 Thread Run-outs for fasteners with Thread in accordance 3 Pages with IS0 261 and IS0 262 Gr 1 This standard specifies thread run-outs for fasteners with thread in accordance with IS0 261. 67.Tubular Fittings with Circular Cross-section Gr 1 This standard defines the most common Symbols with the aim of standardizing and facilitating the use of terminology in Standards for tubular fittings and associated products.040.150.140. measuring forces and minimum tensile strengths.40 Published by GSA in 2006 Steel Tubes and Fittings . bolts and nuts. together with the tooth gap forms and rim profiles of the associated chain wheels.Chemical Composition and Mechanical Properties 22 Pages Gr 3 This standard specifies the chemical composition limits for Aluminium casting alloys and mechanical properties of separately cast test bars for these alloys. Classification 22 Pages Gr 3 This standard specifies requirements for classification of covered electrodes.160. the dimensions of which are standardized in ISO 3601-1. design features and test methods for thin-walled half bearings with integral flange up to an outside diameter of Do of 250 mm and without flange up to an outside diameter of Do of 500 mm.Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat-resisting Steels . calculated as phosphorus (P).Thin-walled Half Bearings with or without Flange . the type of electrode covering and other electrode properties. Design Features and Methods of Test 19 Pages Gr 2 This standard specifies tolerances.20 2 Pages Gr 1 This standard specifies a method for the determination of the ash yielded by starches phosphorus content of starch. Due to the variety of design it is. not possible to standardize the dimensions of the half bearings.10 Published by GSA in 2006 Spices and Condiments . in which the expected content. ISO 16031-1 and ISO 16031-2. __________________________________________________________________________________________ GS ISO 3581 : 2003Ψ 25. __________________________________________________________________________________________ GS ISO 3588 : 1977Ψ 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3548 : 1999Ψ 21.160. 83.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . __________________________________________________________________________________________ GS ISO 3601-3 : 2005Ψ 23.Quality Acceptance Criteria 11 Pages Gr 2 This lays down the quality acceptance criteria of O-rings used in fluid systems. does not exceed 5 % (mlm).220.Tolerances.Determination of Degree of Fineness of Grinding . __________________________________________________________________________________________ GS ISO 3596 : 2000Ψ 67. based on the allweld metal chemical composition. and the allweld metal mechanical properties. however.Determination of Unsaponifiable Matter .50 Published by GSA in 2006 Fluid Power Systems .Classification Gr 3 This standard specifies requirements for classification of overed electrodes. in the as-welded or heat-treated conditions.20 Published by GSA in 2006 Welding Consumables .200.Method 8 Pages using Diethyl Ether Extraction Gr 1 This standard specifies a method using diethyl ether extraction for the determination of the unsaponifiable matter content of animal and vegetable fats and oils.Determination of Ash 67.60.140. __________________________________________________________________________________________ GS ISO 3580 : 2004Ψ 25.Hand and 2 Pages Sieving Method (Reference Method) Gr 1 This standard specifies a reference method for the determination of degree of fineness of grinding of spices and condiments. for manual metal arc welding of ferritic and martensitic creepresisting and low alloy elevated temperature steels. __________________________________________________________________________________________ 168 . including derivatives and by-products.O-ringsPart 3 .100.100. based on the allweld metal in the heat-treated condition.180. by hand sieving to obtain the distribution particle sizes in the sample __________________________________________________________________________________________ GS ISO 3593 : 1981Ψ Published by GSA in 2007 Starch and Derived Products .Covered Electrodes for manual Metal Arc Welding of Creep21 Pages resisting Steels . for manual metal arc welding of stainless and heat-resisting steels.20 Published by GSA in 2006 Welding Consumables .10 Published by GSA in 2006 Plain Bearings . 10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . or b) covering the lower body only.Women's and girl's outwear garments 8 Pages Gr 1 This standard establishes a system of designating the size of women's and girl's outwear garments(including knitwear and swimwear) that are classified as : a) covering the upper or the whole body. Aluminium-Zinc Alloys and ZincAluminium Alloys . __________________________________________________________________________________________ GS ISO 3638 : 1977Ψ Published by GSA in 2007 Textiles . and applies to civilian and uniform garments. Cadmium.020 Published by GSA in 2007 Textiles .Size designation of clothes . quality of chromate coating.20 Published by GSA in 2006 Chromate Conversion Coatings on Zinc.020 5 Pages Gr 1 This standard establishes a system of designating the size of men's and boy's outwear garments(including knitwear and swimwear) that are classified as : a) covering the upper or the whole body. Both the control dimension on which the size designation system is based.220.Infants' garments 61.Determination of Ultraviolet Absorbance Expressed as Specific UV Extinction 6 Pages Gr 1 This standard specifies a method for the determination of the absorbance at ultraviolet wavelengths of animal and vegetable fats and oils.020 Published by GSA in 2007 Textiles .Size designation of clothes . or b) covering the lower body only.200. __________________________________________________________________________________________ 169 .Test Methods 7 Pages Gr 1 This standard specifies methods for the determination of the mass per unit area of both colourless and colour coating.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3613 : 2000Ψ 25.Size designation of clothes .Size designation of clothes . __________________________________________________________________________________________ GS ISO 3637 : 1977Ψ 61.Men's and boy's outwear garments 61.020 6 Pages Gr 1 This standard establishes a system of designating the size of infants' garments. total chromium content per unit area on zinc and cadmium and satisfactory adhesion of chromate conversion coatings __________________________________________________________________________________________ GS ISO 3635 : 1981Ψ 61. are laid down. __________________________________________________________________________________________ GS ISO 3656 : 2002Ψ 67.Difinitions and body measurement procedure 5 Pages Gr 1 This standard defines body dimension and specifies a standard procedure for measuring the body __________________________________________________________________________________________ GS ISO 3636 : 1977Ψ Published by GSA in 2007 Textiles . and the method of indicating the size designation on a garment label. and applies to civilian and uniform garments. These flanges may also be used in those parts connected with the vacuum system where the vacuum is not so high.Baseplate and Installation .Ripening after Cold Storage 67. This Standard is also applicable to variable displacement units.Dimensions 55. which comprises all activities for the movement of products from their origin to their destination.Unit Load Sizes . __________________________________________________________________________________________ GS ISO 3668 : 1998Ψ Published by GSA in 2005 Paints and Varnishes.040 9 Pages Gr 1 Deals with the sampling and testing of paints.Dimensions 23. Alternative numbers and locations of baseplate fixing holes are given to suit individual installations.100. __________________________________________________________________________________________ 170 . __________________________________________________________________________________________ GS ISO 3669 : 1986Ψ Published by GSA in 2006 Vacuum Technology .Geometries . __________________________________________________________________________________________ GS ISO 3659 : 1977Ψ Published by GSA in 2006 Fruits and Vegetables .080. (IO--7mbar).080 3 Pages Gr 1 This standard specifies the basic baseplate and installation dimensions for end-suction centrifugal Pumps.Pumps and Motors .10 6 Pages Gr 1 This standard specifies a method for the determination of the saponification value of animal and vegetable fats and oils.10 2 Pages Gr 1 This standard established the geometric displacements (V) of hydraulic fluid power Pumps and motors having rotating or oscillating drives. the values refer to the maximum displacement.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3657 : 2002Ψ Published by GSA in 2006 Animal and Vegetable Fats and Oils . __________________________________________________________________________________________ GS ISO 3662 : 1976Ψ Published by GSA in 2006 Hydraulic Fluid Power . varnishes and related products.Visual Comparison of the Colour of Paints 87. in such cases.Bakable Flanges . __________________________________________________________________________________________ GS ISO 3676 : 1983Ψ Published by GSA in 2006 Packaging . The saponification value is a measure of the free and sterified acids present in fats and fatty acids.01 4 Pages Gr 1 This standard describes methods the application of which enable good ripening conditions for fruit and vegetables to be achieved following cold storage __________________________________________________________________________________________ GS ISO 3661 : 1977Ψ Published by GSA in 2006 End-suction Centrifugal Pumps .Displacements 23.160 5 Pages Gr 1 This standard specifies the dimensions of fixed or rotatable bolted bakable flanges used in vacuum systems where pressure under steady conditions is less than lO--5 Pa.Determination of Saponification Value 67.100.020 2 Pages Gr 1 This standard is based on the concept of a modular system and specifies the plan dimensions for unit loads suitable for distribution of goods.Dimensions 23. Brazing and Braze .10 2 Pages Gr 1 This standard specifies the parts of a named plants that are suitable for making black tea for consumption as a beverage and the chemical requirements for black test that are used to indicate that tea from that source has been produced in accordance with good production practice __________________________________________________________________________________________ GS ISO 3722 : 1976Ψ 23.100. For brazing and braze welding materials only. on the basis of their Chemical composition.Print-Free Test 2 Pages Gr 1 This standard specifies a method for assessing. the designation includes their solidus/liquids temperatures.20 Published by GSA in 2005 Butter.60 1 Pages Gr 1 This standard specifies a method for verifying the end load rating for a hydraulic fluid power filter element.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3677 : 1992Ψ 25.Determination of Moisture. mobile. __________________________________________________________________________________________ GS ISO 3720 : 1986Ψ Published by GSA in 2006 Black Tea .Designation 2 Pages Gr 1 This standard specifies designations for filler materials for soft soldering. Collection of the hydrogen over mercury is the primary method.100. lt also verifies the ability of a hydraulic fluid power filter element to withstand the designated axial loading imposed by installation and use.100. by means of a simple empirical test.Filter Elements Method for End Load Test 23. __________________________________________________________________________________________ GS ISO 3690 : 2000Ψ 25.160.99 Published by GSA in 2006 Hydraulic Fluid Power .Welding .40 Published by GSA in 2006 Welding and Allied Processes . __________________________________________________________________________________________ GS ISO 3723 : 1976Ψ Published by GSA in 2006 Hydraulic Fluid Power . __________________________________________________________________________________________ GS ISO 3678 : 1976Ψ 87. the resistance of a coat of paint.Determination of Hydrogen Content in Ferritic Steel Arc 20 Pages Weld Metal Gr 2 This standard specifies the sampling and analytical procedure for the determination of diffusible and residual hydrogen in ferritic weld metal arising from the welding of ferritic steel using arc welding processes with filler metal.160. brazing and braze welding. __________________________________________________________________________________________ GS ISO 3727-1 : 2001Ψ 67. varnish or related product to imprinting by a nylon gauze under a specified force applied for a specified time.40 Published by GSA in 2006 Filler Metal for Soft Soldering. marine and aerospace hydraulic fluid power applications. Non-Fat Solids and Fat Content 6 Pages Part 1: Determination of Moisture Content (Reference Method) Gr 1 Specifies the reference method for the determination of the moisture content of butter.Definition and Basic Requirements 67.140. __________________________________________________________________________________________ 171 .Fluid Sample Containers Qualifying and Controlling Cleaning Methods 2 Pages Gr 1 This standard specifies a method for qualifying and controlling the cleaning methods for Sample Containers used in conjunction with contaminational analysis techniques on hydraulic fluids used in industrial.040 Published by GSA in 2006 Paints and Varnishes . 100. by the distillation method.Determination of Moisture. excluding emulsions. intended for use in the marking of textile articles (see also 4. tars and products derived from these materials. Non-Fat Solids and Fat Content Part 2: Determination of Non-Fat Solids Content (Reference Method 6 Pages Gr 1 Specifies the reference method for the determination of the non-fat solids content of butter. and of tractors and machinery for agriculture and forestry.Determination of Water .providing information to prevent irreversible damage to the article during the textile care process.Determination of Base Number .Distillation 13 Pages Method Gr 2 This standard specifies a method for determination of water up to 25 % in petroleum products. __________________________________________________________________________________________ GS ISO 3771 : 1994Ψ 75.220. __________________________________________________________________________________________ GS ISO 3727-3 : 2003Ψ 67.1). __________________________________________________________________________________________ GS ISO 3795 : 1989Ψ 13. __________________________________________________________________________________________ GS ISO 3728 : 2004Ψ 67. Non-Fat Solids and Fat Content Part 3 : Calculation of Fat Content 2 Pages Gr 1 Specifies a method for the calculation of the fat content of butter.Determination of Total Solids Content (Reference Method) 5 Pages Gr 1 This standard specifies a reference method for the determination of the total solids content of ice-cream.20 Published by GSA in 2005 Butter.Care Labelling Code using Symbols 59. bitumens. coaches).20 Published by GSA in 2005 Butter . lorries/trucks.Determination of Moisture. __________________________________________________________________________________________ GS ISO 3758 : 2005Ψ Published by GSA in 2005 Textiles .080 Published by GSA in 2006 Petroleum Products . __________________________________________________________________________________________ 172 .100.Per chloric Acid Potentiometric Titration Method 8 Pages Gr 1 This standard specifies a method for the determination of basic constituents in petroleum products by potentiometric titration with per chloric acid in glacial acetic acid. __________________________________________________________________________________________ GS ISO 3733 : 1999Ψ 75.080 Published by GSA in 2007 Petroleum Products and Bituminous materials . after exposure to a small flame.40 Published by GSA in 2006 Road Vehicles and Tractors and Machinery for Agriculture and Forestry Determination of Burning Behaviour of Interior Materials 6 Pages Gr 1 This standard specifies a method for determining the horizontal buring rate of materials used in the occupant compartment of road vehicles (for example. milk ices and similar products.40 Published by GSA in 2005 Ice Cream and Milk Ice .080.01 23 Pages Gr 3 This standard establishes a system of graphic symbols. passenger cars.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3727-2 : 2001Ψ 67.100. estate cars. pneumatic tools and machines.080. It includes the procedures for type testing.Woven Fabrics .040. It also contains requirements for filling conditions of acetylene cylinders and bundles. It also specifies requirements for rubber hoses for normal duty of 2 MPa (20 bar) and light duty [limited to hoses for maximum working pressure of 1 MPa (10 bar) and with bore up to and including 6.Vocabulary .140. __________________________________________________________________________________________ GS ISO 3821 : 2008Ψ 25. cutting and allied processes. pneumatic tools and machines. __________________________________________________________________________________________ GS ISO 3807-2 : 2000Ψ 23.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3801 : 1977Ψ 59.Part I : General 6 Pages Gr 1 This standard constitutes the first part of a vocabulary relating to compressors. __________________________________________________________________________________________ GS ISO 3857-2 : 1977Ψ 01. production batch testing and the methods for determining the maximum permissible settled pressure in acetylene cylinders and the porosity of the porous mass.23 Published by GSA in 2006 Compressors. __________________________________________________________________________________________ GS ISO 3807-1 : 2000Ψ 23. and apply to the determination of the fabric mass of complete pieces as well as of sample lengths.Part II : Compressors 4 Pages Gr 1 This standard constitutes the second part of a vocabulary relating to compressors. Lt deals with compressors.040. cutting and allied processes 16 Pages Gr 2 This standard specifies requirements for rubber hoses (including twin hoses) for welding. Symbols and units. Pneumatic Tools and Machines .30 Published by GSA in 2006 Cylinders for Acetylene . Part Illi) deals with pneumatic tools and machines __________________________________________________________________________________________ 173 .30 Published by GSA in 2005 Textiles .020.3 mm]. lt deals with basic concepts. It includes the procedures for type testing. __________________________________________________________________________________________ GS ISO 3856-1 : 1984Ψ 87.020.Basic Requirements Part 2: Cylinders with Fusible Plug 28 Pages Gr 3 This standard specifies the basic requirements for acetylene cylinders with shells made from steel and equipped with fusible plugs with a maximum nominal water capacity of 150 l. Part I deals with basic concepts. production batch testing and the methods for determining the maximum permissible settled pressure in acetylene cylinders and the porosity of the porous mass. Symbols and units. prepared according to IS0 6713 or other suitable International 3 flame atomic absorption spectrometric method __________________________________________________________________________________________ GS ISO 3857-1 : 1977Ψ 01. Pneumatic Tools and Machines .Vocabulary .Flame Atomic Absorption Spectrometric Method and Dithizone Spectrophometer Method Gr 1 Describes two methods for the determination of the lead content of the test solutions.Determination of Mass per Unit Length and Mass per Unit Area Gr 1 4 Pages This standard specifies methods for the determination of or folded down the middle.40 Published by GSA in 2010 Gas welding equipment — Rubber hoses for welding. 83.160.30 Published by GSA in 2006 Cylinders for Acetylene .040 Published by GSA in 2005 Paints and Varnishes .Determination of "Soluble’’ Metal Content6 Pages Part 1: Determination of Lead Content.23 Published by GSA in 2006 Compressors.30.Basic Requirements Part 1: Cylinders without fusible plugs 22 Pages Gr 3 This standard specifies the basic requirements for acetylene cylinders without fusible plugs or other safety devices with a maximum nominal water capacity of 150 l. 10.30 4 Pages Gr 1 This standard specifies the dimensional characteristics of Woodruff keys and of the alternative Whitney key and of the corresponding keyways in shaft and hub.Spectrophotometric Method Gr 1 This standard specifies a spectro photometric method for the determination of the total phosphorus content of starch __________________________________________________________________________________________ 174 .Contamination Analysis .Specification 25.220. __________________________________________________________________________________________ GS ISO 3938 : 1986Ψ 23. 75. __________________________________________________________________________________________ GS ISO 3871 : 2000Ψ 43. __________________________________________________________________________________________ GS ISO 3946 : 1982Ψ 67.100.20 Published by GSA in 2006 Conversion Coatings on Metallic Materials .60 Published by GSA in 2006 Hydraulic Fluid Power . highly reflective coatings (up to 2 Pm) by the use of Fizeau multiple-beam interferometry.Measurement of Coating Thicknesses .180. The method described cannot be applied to vitreous enamel coatings.Gravimetric methods Gr 1 This standard specifies gravimetric methods for determining the coating mass per unit area of conversion coatings on metallic materials.220. mobile and marine applications.120.Labelling of Containers for Petroleum-Based or Non-Petroleum-Based Brake Fluid Gr 1 3 Pages This standard specifies the minimum labelling required for commercial containers of petroleum and petroleum-based fluids used in the braking and hydraulic systems of road vehicles. __________________________________________________________________________________________ GS ISO 3912 : 1977Ψ Published by GSA in 2006 Woodruff Keys and Keyways 21.Method for Reporting Analysis Data 12 Pages Gr 2 This standard specifies methods for reporting data relative to contamination levels of hydraulic fluids used in industrial.220.40 4 Pages Gr 1 This standard specifies the requirements for rubber hoses for wet and dry sand and grit blasting.Determination of Total 3 Pages Phosphorus Content .20 Published by GSA in 2007 Starch and Derived Products .Determination of Coating Mass Per Unit 5 Pages Area .040. suitable for use up to a maximum working pressure of 6. 83.Fizeau 4 Pages Multiple-beam Interferometry Method Gr 1 This standard specifies a method for the measurement of the thickness of thin.20 Published by GSA in 2006 Metallic and Other Non-organic Coatings . It also gives the relationship to be observed between the diameter of the shaft and the section of the key for both torque transmission and positional applications.3 bar and over an operating temperature range of 25 °C to +70 °C.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3861 : 2005Ψ Published by GSA in 2006 Rubber Hoses for Sand and Grit Blasting .120 Published by GSA in 2006 Road Vehicles .40. including mopeds and motorcycles __________________________________________________________________________________________ GS ISO 3892 : 2000Ψ 25. __________________________________________________________________________________________ GS ISO 3868 : 1976Ψ 25.140. 30 6 Pages Gr 1 This standard establishes the graphical symbols for elements of kinematic diagrams of products in all branches of industry.22.140.080.080. 83. Each type is divided into two classes dependent on electrical conductivity requirements.200.40.080.10 6 Pages Gr 1 This standard specifies a method for the determination of the iodine value of animal and vegetable fats and oils. __________________________________________________________________________________________ GS ISO 3952-3 : 1979Ψ 01.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3947 : 1977Ψ Published by GSA in 2007 Starch and Derived Products .10 7 Pages Gr 1 This standard specifies a method for the determination of the peroxide value of animal and vegetable fats and oils.Determination of Total Fat 67.30 Published by GSA in 2006 Kinematic Diagrams . native or modified __________________________________________________________________________________________ GS ISO 3949 : 2004Ψ 23. __________________________________________________________________________________________ GS ISO 3952-4 : 1984Ψ Published by GSA in 2006 Kinematic Diagrams .Determination of Peroxide Value 67. __________________________________________________________________________________________ 175 .30 12 Pages Gr 2 This standard establishes the graphical Symbols for elements of kinematic diagrams of products in all branches of industry. The Symbols established by this Standard are to be used on diagrams in technical documentation.180.Native or Modified. The Symbols established by this International Standard are to be used on diagrams in technical documentation. as well as in technical and educational literature.20 2 Pages Gr 1 This standard specifies a method for the determination of the total fat content of starches. as well as in technical and educational literature. __________________________________________________________________________________________ GS ISO 3952-2 : 1981Ψ Published by GSA in 2006 Kinematic Diagrams .Part 2: Graphical Symbols 01. The symbols are to be used on diagrams in technical documentation.100.Part 3: Graphical Symbols 9 Pages Gr 1 This standard establishes the graphical Symbols for elements of kinematic diagrams of products in all branches of industry.Determination of Iodine Value 67. __________________________________________________________________________________________ GS ISO 3961 : 1996Ψ Published by GSA in 2006 Animal and Vegetable Fats and Oils . as well as in technical and educational literature.Part 4: Graphical Symbols 01. hereinafter referred to as fats.Specification Gr 1 This standard specifies requirements for two types of textile-reinforced thermoplastics hoses and hose assemblies of nominal bore from 5 to 25. __________________________________________________________________________________________ GS ISO 3960 : 2007Ψ Published by GSA in 2006 Animal and Vegetable Fats and Oils .Textile-reinforced Types for Hydraulic Applications 7 Pages .40 Published by GSA in 2006 Plastics Hoses and Hose Assemblies . magnesium.Product Grades A and B 21.Determination for Sulfated ash 6 Pages Gr 1 This standard describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. potassium.10 Published by GSA in 2006 Hexagon Head Bolts .060.60 Published by GSA in 2006 Hydraulic Fluid Power .Product Grade B . phosphorus and chlorine tan also be present in combined form.10 13 Pages Gr 2 This standard specifies a reference method for the determination of the peroxide value of anhydrous milk fat and related products.Product Grade C 21.6 up to and including M64.100 Published by GSA in 2007 Petroleum Products . __________________________________________________________________________________________ GS ISO 4015 : 1979Ψ 21. weak aqueous chemical solutions and abrasive solids and slurries.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 3968 : 2001Ψ 23.10 9 Pages Gr 1 This standard specifies the characteristics of hexagon head bolts with threads from M5 up to and including M64 of product grade C. The elements Sulfur.Determination of Peroxide Value (Routine Method) 67. Calcium.060. of product grade B. __________________________________________________________________________________________ GS ISO 4016 : 1999Ψ Published by GSA in 2006 Hexagon Head Bolts . __________________________________________________________________________________________ GS ISO 3994 : 2007Ψ 23.060. whichever is shorter and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm. for use in the ambient temperature range from − 10 °C to + 55 °C.Evaluation of Differential Pressure Versus Flow Characteristics Gr 2 11 Pages This standard specifies a procedure for evaluating differential pressure versus flow characteristics of hydraulic filters and constitutes a basis for agreement between the filter manufacturer and user.and heavy-duty applications.Filters .70 Published by GSA in 2010 Plastics hoses — Helical-thermoplasticreinforcedthermoplastics hoses for 14 Pages suction and discharge of aqueousmaterials — Specification Gr 2 This standard specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water.100. with reduced shank (shank diameter x pitch diameter). __________________________________________________________________________________________ GS ISO 3976 : 2006Ψ Published by GSA in 2005 Anhydrous Milk Fat .040. zinc. __________________________________________________________________________________________ GS ISO 3987 : 1994Ψ 75.100. sodium and tin. whichever is shorter.10 12 Pages Gr 2 This standard specifies the characteristics of hexagon head bolts with threads from M1. medium. of product grade A for threads M1.The three types of hose are for light-. __________________________________________________________________________________________ 176 . __________________________________________________________________________________________ GS ISO 4014 : 1999Ψ Published by GSA in 2006 Hexagon Head Bolts .Reduced Shank (Shank Diameter = Pitch Diameter) 5 Pages Gr 1 This standard gives specifications for hexagon head bolts with metric dimensions and thread diameters from 3 up to and including 20 mm.6 to M24 and nominal lengths up to and including 10 d or 150 mm.Lubricating Oils and Additives . These additives usually contain one or more of the following metals: barium. 060. __________________________________________________________________________________________ GS ISO 4028 : 2003Ψ Published by GSA in 2006 Hexagon Socket Set Screws with Dog Point 21. whichever is shorter. __________________________________________________________________________________________ 177 .50 7 Pages Gr 1 This standard specifies test methods in which the bore of a rubber hose test piece is exposed to saturated steam.Test Methods 23.10 4 Pages Gr 1 This standard specifies the characteristics of hexagon socket set screws with flat point and threads from M1. whichever is shorter.10 4 Pages Gr 1 This standard specifies the characteristics of hexagon socket set screws with dog point and threads from M1.040.Particulate Contamination Analysis . __________________________________________________________________________________________ GS ISO 4018 : 1999Ψ 21.10 11 Pages Gr 2 This standard specifies the characteristics of hexagon head screws with threads from M1.6 up to and including M24 and of product grade A.060.Extraction of Fluid Samples 6 Pages from Lines of an Operating System Gr 1 This standard specifies procedures for extracting fluid samples from a hydrauIic fluid power system under operation.10 Published by GSA in 2006 Hexagon Head Screws — Product Grade C 9 Pages Gr 1 This standard specifies the characteristics of hexagon head screws with threads from M5 up to and including M64.6 up to and including M64.060.060. so simulating Service conditions. __________________________________________________________________________________________ GS ISO 4026 : 2003Ψ Published by GSA in 2006 Hexagon Socket Set Screws with Flat Point 21.60 Published by GSA in 2006 Hydraulic Fluid Power .6 up to and including M24 and of product grade A.Product Grades A and B 21. __________________________________________________________________________________________ GS ISO 4027 : 2003Ψ Published by GSA in 2006 Hexagon Socket Set Screws with Cone Point 21. __________________________________________________________________________________________ GS ISO 4021 : 1992Ψ 23.060.6 to M24 and nominal lengths up to and including 10 d or 150 mm.6 up to and including M24 and of product grade A.10 4 Pages Gr 1 This standard specifies the characteristics of hexagon socket set screws with cone point and threads from M1. __________________________________________________________________________________________ GS ISO 4023 : 1991Ψ Published by GSA in 2006 Rubber Hoses for Steam .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4017 : 1999Ψ Published by GSA in 2006 Hexagon Head Screws . and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm. of product grade C. of product grade A for threads M1.100. __________________________________________________________________________________________ GS ISO 4034 : 1999Ψ Published by GSA in 2006 Hexagon Nuts .Electroplated Coatings 21.20 5 Pages Gr 1 This standard specifies the characteristics of unchamfered hexagon thin nuts.Product Grades A and B 21. style 1. with threads from M1.Product Grade C 21.060. with product grade A for threads d < M16 and product grade B for threads d . __________________________________________________________________________________________ GS ISO 4035 : 1999Ψ Published by GSA in 2006 Hexagon Thin Nuts (Chamfered) .20 5 Pages Gr 1 This standard specifies the characteristics of hexagon nuts.060.01 23 Pages Gr 3 This standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy.6 up to and including M64. with product grade A for threads d < M16 and product grade B for threads d .6 up to including M64. M1 __________________________________________________________________________________________ GS ISO 4036 : 1999Ψ Published by GSA in 2006 Hexagon Tthin Nuts (Unchamfered) .060. style 2.060. M16. M16 __________________________________________________________________________________________ GS ISO 4033 : 1999Ψ Published by GSA in 2006 Hexagon nuts.060. Style 1 .20 6 Pages Gr 1 This standard specifies the characteristics of chamfered hexagon thin nuts. Style 2 . with threads from M1.060.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4029 : 2003Ψ Published by GSA in 2006 Hexagon Socket Set Screws with Cup Point 21.20 6 Pages Gr 1 This standard specifies the characteristics of hexagon nuts.Product Grade B 21. with threads from M1.20 5 Pages Gr 1 This standard specifies the characteristics of hexagon nuts with threads from M5 up to and including M64 and product grade C.Product Grades A and B 21. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement relief for fasteners with high tensile strength or hardness and for surface-hardened fastened __________________________________________________________________________________________ 178 .Product Grades A and B 21. with threads from M5 up to and including M36.060. __________________________________________________________________________________________ GS ISO 4042 : 1999Ψ Published by GSA in 2006 Fasteners . with product grade A for threads d < M16 and product grade B for threads d .6 up to and including M24 and of product grade __________________________________________________________________________________________ GS ISO 4032 : 1999Ψ Published by GSA in 2006 Hexagon Nuts.10 4 Pages Gr 1 This standard specifies the characteristics of hexagon socket set screws with cup point and threads from M1.6 up to and including M10 and product grade B. __________________________________________________________________________________________ GS ISO 4136 : 2001Ψ Published by GSA in 2007 Destructive Tests on Welds in Metallic Materials -Transverse Tensile Test 25.160. with reference numbers. decaffeinated green coffee.Metric Series Gr 1 This standard specifies the series of diameters to be used and the dimensions which are common to all types of unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure.140. to achieve the connection to existing metal pipes. including poultry.70 Published by GSA in 2006 Rubber and Plastics Hoses and Hose Assemblies Determination of Permeability of Gas 5 Pages Gr 1 This standard specifies three methods for the determination of the volume of gas diffusing through the wall of a rubber or plastics hose in a specified period.040.Determination of Caffeine Content (Reference Method) 6 Pages Gr 1 This standard specifies the reference method for the determination of the caffeine content of coffee.140. __________________________________________________________________________________________ GS ISO 4080 : 1991Ψ 20. for welding and allied processes. decaffeinated roasted coffee.040. __________________________________________________________________________________________ 179 . fittings. both dried and liquid.65 3 Pages Gr 1 This standard gives the specifications for steel wire to be used for elevator ropes only.10 Published by GSA in 2007 Meat and Meat Products — Determination of L-(+)-Glutamic Acid content — 11 Pages Reference Method Gr 2 This standard specifies a reference method for the determination of the L-(+)-glutamic acid content of meat and meat products. both dried and liquid. and decaffeinated extracts.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4052 : 1983Ψ 67.40 9 Pages Gr 1 This standard specifies the sizes of test specimen and the procedure for carrying out transverse tensile tests in order to determine the tensile strength and the location of fracture of a welded butt joint.040. __________________________________________________________________________________________ GS ISO 4063 : 1998Ψ 01.120.20 Published by GSA in 2007 Coffee . __________________________________________________________________________________________ GS ISO 4132 : 1979Ψ 23. extracts of coffee. __________________________________________________________________________________________ GS ISO 4134 : 1999Ψ 67. valves and/or apparatus with pipe threads. roasted coffee. The method is applicable to green coffee.25 Published by GSA in 2006 Welding and Allied Processes . __________________________________________________________________________________________ GS ISO 4101 : 1983Ψ Published by GSA in 2006 Drawn Steel Wire for Elevator Ropes . It also applies to metallic materials in all forms of product with joints made by any fusion welding process.Nomenclature of Processes and Reference Numbers 8 Pages Gr 1 This standard establishes a nomenclature.45 Published by GSA in 2006 Unplasticized Polyvinyl Chloride (PVC) and Metal Adaptor Fittings for Pipes under 5 Pages Pressure .Laying Lengths and Size of Threads .Specifications 77. water.20 Published by GSA in 2007 Green Coffee — Olfactory and Visual Examination and Determination of Foreign 5 Pages Matter and Defects Gr 1 This standard specifies methods for the olfactory and visual examination and for the determination of foreign matter and defects in green coffee from all origins.40 12 Pages Gr 2 This standard specifies requirements for non-alloy steel fittings for threaded connections in accordance with IS0 7/1 used mainly for industrial purposes.040.040.30 Published by GSA in 2006 Straight Cylindrical Involute Splines .30 Published by GSA in 2006 Straight Cylindrical Involute Splines .140.120.40 19 Pages Gr 2 This standard specifies the types. __________________________________________________________________________________________ GS ISO 4145 : 1986Ψ Published by GSA in 2006 Non-alloy Steel Fittings Threaded to IS0 7/1 23. etc. __________________________________________________________________________________________ GS ISO 4156-3 : 2005Ψ 21.Metric Module.20 6 Pages Gr 1 This standard specifies the characteristics of hexagon nuts with flange. __________________________________________________________________________________________ 180 . Side Fit 59 Pages Part 1: Generalities Gr 6 This standard provides the data and indications necessary for the design and manufacture of straight (non-helical) side-fitting cylindrical involute splines. of product grade A for threads up to and including M16 and product grade B for threads above M16.Coarse Thread 21.Metric Module. used for ordinary piping for steam. with metric coarse threads from M5 to M20 inclusive. pressure-temperature ratings. oil. Side Fit 188 Pages Part 2 : Dimensions Gr 12 This standard specifies geometry and inspection dimensions for the design and manufacture of straight (non-helical) side-fitting cylindrical involute splines. __________________________________________________________________________________________ GS ISO 4149 : 2005Ψ 67. air.30 Published by GSA in 2006 Straight Cylindrical Involute Splines . __________________________________________________________________________________________ GS ISO 4156-2 : 2005Ψ 20.Stainless Steel Fittings Threaded in Accordance with ISO 7-1 23. __________________________________________________________________________________________ GS ISO 4161 : 1999Ψ Published by GSA in 2006 Hexagon Nuts with Flange .120.Metric Module.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4144 : 2003Ψ Published by GSA in 2006 Pipework . gas. minimum dimensions and materials of stainless steel fittings for threaded connections in accordance with ISO 7-1.060. Side Fit 44 Pages Part 3 : Inspection Gr 5 This standard provides data and guidance for the inspection of straight (non-helical) side fitting cylindrical involute splines. __________________________________________________________________________________________ GS ISO 4156-1 : 2005Ψ 21.120. in order to assess conformity with a specification or a contract. Classical and Narrow V-belts .Tank Calibration by Liquid Measurement 26 Pages Incremental Method using Volumetric Meters Gr 3 This standard specifies a method for the calibration of tanks by addition of batches of liquid.20 8 Pages Gr 2 This standard gives specifications for hexagon flange bolts.060 Published by GSA in 2007 Complete.220. __________________________________________________________________________________________ GS ISO 4180-1 : 1980Ψ 85.180. Z.Lengths in Datum System 21. air or inland waterway. measured accurately by means of a meter.10 5 Pages Gr 1 This standard specifies. SPA. __________________________________________________________________________________________ GS ISO 4183 : 1995Ψ 21. __________________________________________________________________________________________ GS ISO 4198 : 1984Ψ 71.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4162 : 1990Ψ Published by GSA in 2006 Hexagon Flange Bolts . A. filled transport packages intended for use within any distribution system. __________________________________________________________________________________________ GS ISO 4184 : 1992Ψ Published by GSA in 2006 Belt Drives . __________________________________________________________________________________________ GS ISO 4180-2 : 1980Ψ 85. Filled Transport Packages .10 Published by GSA in 2006 Belt Drives . B. or by a combination of these modes of transport.8 to 10. for domestic hand dishwashing which are of interest to the consumer __________________________________________________________________________________________ GS ISO 4269 : 2001Ψ 75.Part 2 : Quantitative Data 15 Pages Gr 2 This standard establishes general rules to be used for the compilation of performance test schedules for complete.060. for classical and narrow V-belts of sections.220.Part 1 : General Principles Gr 1 This standard establishes general rules to be used for the compilation of performance test schedules for complete. Filled Transport Packages .Detergents for Hand Dishwashing .9 and A2-70. C.Small Series 21. sea.Guide for Comparative 7 Pages Testing of Performance Gr 1 This standard establishes guidelines for carrying out comparative tests for determining the principal performance characteristics of detergents.30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products.100. filled transport packages intended for use within any distribution system. whether transport by road.Grooved Pulleys (System based on datum 6 Pages width) Gr 2 This standard specifies the principal dimensions of grooved pulleys for classical V-belts (sections Y.General Rules for the Compilation of Performance Test Schedules . solid or liquid.General Rules for the Compilation of 5 Pages Performance Test Schedules . The liquid is used as a volume-transfer medium.Classical and Narrow V-belts . with threads from M5 up to and including Ml6 and property classes 8.060 Published by GSA in 2007 Complete. __________________________________________________________________________________________ 181 . D and E) and narrow V-belts (sections SPZ. small series.40 Published by GSA in 2007 Surface Active Agents. SPB and SPC) specified in the terminology System based on datum width. rail. Rules and Procedures for the Assessment of Surface Texture 8 Pages Gr 1 This standard specifies the rules for comparison of the measured values with the tolerance limits for surface texture parameters defined in IS0 4287. together with the rim profiles of sheaves and the chain attachment ends of clevises. Bearing Materials 53 Pages and their Properties Gr 6 This standard gives the most commonly used terms for plain bearings with their definitions and classification. Service dressings and fibre core lubricants are excluded.10 Published by GSA in 2006 Plain Bearings -Terms.Copper Alloy Bushes 21. Definitions and Classification .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4288 : 1996Ψ 17.040.120.. It gives dimensions. __________________________________________________________________________________________ GS ISO 4347 : 2004Ψ 21. preloading and minimum tensile strengths. IS0 12085. Measuring Forces and Tensile Strengths 14 Pages Gr 2 This standard specifies the characteristics of chains used for general lifting purposes.Part 1: Design. Clevises and Sheaves . IS0 13565-2 and IS0 13565-3. length measurement. __________________________________________________________________________________________ GS ISO 4345 : 1988Ψ Published by GSA in 2006 Steel Wire Ropes . d.65 5 Pages Gr 1 This standard specifies the construction and characteristics of fibre main cores for steel wire ropes using two types of fibre. __________________________________________________________________________________________ GS ISO 4346 : 1977Ψ Published by GSA in 2006 Steel Wire Ropes for General Purposes .Basic Requirements 77.Fibre Main Cores .140.Dimensions.Lead and Tin Casting Alloys for Multilayer Plain Bearings 21.100.10 5 Pages Gr 1 This standard specifies dimensions and tolerantes for cylindrical and flanged bushes with internal diameter. __________________________________________________________________________________________ GS ISO 4381 : 2000Ψ Published by GSA in 2006 Plain Bearings .65 1 Page Gr 1 This standard specifies the nature and properties of lubricants used in the manufacture of wire ropes for general purposes.Surface Texture: Profile Method . 77.220.30 Published by GSA in 2006 Leaf Chains.Specification 77. __________________________________________________________________________________________ GS ISO 4379 : 1993Ψ Published by GSA in 2006 Plain Bearings .20 Published by GSA in 2006 Geometrical Product Specifications (GPS) . 21. in the range 6 mm to 200 mm. __________________________________________________________________________________________ 182 .040.21. limits for interchangeability.100.10.140.100. __________________________________________________________________________________________ GS ISO 4378-1: 1997Ψ 01.Lubricants .60 6 Pages Gr 1 This standard specifies requirements for bearing metals based on lead and tin casting alloys for multilayer plain bearings. 100.5 mm __________________________________________________________________________________________ GS ISO 4392-1 : 2002Ψ 23. roll bonded) and possibly an electrodeposited overlay __________________________________________________________________________________________ GS ISO 4384-1 : 2000Ψ 21. The multilayer material consists of a steel backing. sintered.Cylinder Barrels 9 Pages Part 1 : Requirements for Steel tubes with Specially Finished Bore Gr 1 This standard specifies the mechanical properties. of either fixed or variable displacement types. seamless or welded type.10 Published by GSA in 2006 Hydraulic Fluid Power . It describes two comparable methods of measurement.100.100. __________________________________________________________________________________________ 183 . dimensional tolerances. with layer thicknesses greater than or equal to 0.100. copper and aluminium.Metallic Multilayer Plain Bearings 10 Pages Part 1: Non-destructive Ultrasonic Testing of Bond Gr 1 This standard specifies an ultrasonic testing method for determining bond defects between the bearing metal and the backing.20 Published by GSA in 2006 Fluid Power Systems and Components .100.10 7 Pages Gr 1 This standard specifies requirements for multilayer materials for the manufacture of thin-walled plain bearings (half bearings. namely the constant torque method (see clause 6) and the constant pressure method (see clause 7). manufactured by casting. __________________________________________________________________________________________ GS ISO 4386-1 : 1992Ψ 21. with plain ends and having specially finished bores with or without metal removal.Hardness Testing of Bearing Metals Part 1: Compound Materials Gr 1 3 Pages This standard specifies parameters for the hardness testing of compound materials for plain bearings made from steel and bearing metal with bearing metals based on lead.10 Published by GSA in 2006 Plain Bearings . surface finishes and technical delivery conditions for round steel tubes. no preference is given to either.100. thrust washers). the bearing layer (cast.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4383 : 2000Ψ Published by GSA in 2006 Plain Bearings — Multilayer Materials for Thin-walled Plain Bearings 21. hot or cold worked condition. sintering or plating. hydraulic and pneumatic fluid power cylinders.Determination of Characteristics of Motors Part 2: Startability Gr 2 14 Pages This standard specifies two test methods for determining the startability of rotary hydraulic motors. bushes. __________________________________________________________________________________________ GS ISO 4394-1 : 1980Ψ 23.10 Published by GSA in 2006 Hydraulic Fluid Power . The test tan be performed on metallic multilayer plain bearings consisting of backings lined with bearing metal based on lead and tin.Determination of Characteristics of Motors 11 Pages Part 1: At Constant Low Speed and Constant Pressure Gr 2 This standard describes a method of determining the low speed characteristics of positive displacement rotary fluid power motors. __________________________________________________________________________________________ GS ISO 4393 : 1978Ψ 23. tin.20 Published by GSA in 2006 Fluid Power Systems and Components . __________________________________________________________________________________________ GS ISO 4392-2 : 2002Ψ 23.100.Cylinders Basic Series of Piston Strokes 2 Pages Gr 1 This standard specifies the preferred series of Piston strokes for application to Single-acting and doubleacting. Since the results obtained by these two methods are equivalent.10 Published by GSA in 2006 Plain Bearings . Fluids .120 Published by GSA in 2006 Hydraulic Fluid Power .Piston Rod Thread Dimensions and Types 2 Pages Gr 1 This standard establishes a basic series for piston rod threads for application to hydraulic and pneumatic fluid power cylinders.100.50 Published by GSA in 2006 Hydraulic Fluid Power .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4395 : 1978Ψ 23. under steady-state conditions.Characteristics and Requirements 4 Pages Gr 1 This standard specifies the following characteristics and requirements for a general purpose three-pin electrical plug connector with earth contact for use with a single solenoid: __________________________________________________________________________________________ GS ISO 4401 : 2005Ψ 23.Three-pin Electrical Plug Connectors with Earth Contact .100. 75.50 Published by GSA in 2010 Hydraulic fluid power — Valves — Determination of pressure 9 Pages differential/flow characteristics 23.100.20 Published by GSA in 2006 Fluid Power Systems and Components . Requirements for test installations.100.Method for Coding the Level of Contamination by Solid 7 Pages Particles Gr 1 This standard specifies the code to be used in defining the quantity of solid particles in the fluid used in a given hydraulic fluid power system. procedures and presentation of results are specified.Connectors and Associated Components 2 Pages Nominal Pressures Gr 1 This standard specifies a selection of nominal pressures for hydraulic and pneumatic fluid power connectors and associated components.100. __________________________________________________________________________________________ GS ISO 4406 : 1999Ψ 23.Determination of Particulate Contamination by the Counting Method using an Optical Microscope 14 Pages Gr 2 This standard specifies methods for determining the level of particulate contamination in liquids used in hydraulic systems by counting the number of particles deposited on the surface of a membrane filter using an optical microscope.60 Published by GSA in 2006 Hydraulic Fluid Power . __________________________________________________________________________________________ GS ISO 4411 : 2008Ψ 23.Cylinders .100.Mounting Surfaces 16 Pages Gr 2 This standard specifies the dimensions and other data relating to surfaces on which four-port hydraulic directional control valves are mounted in order to ensure their interchangeability. It also specifies thread dimensions and configurations to be used with hydraulic and pneumatic fluid power piston rod ends. __________________________________________________________________________________________ 184 .50 This standard specifies methods for determining.100. __________________________________________________________________________________________ GS ISO 4400 : 1994Ψ 23.Four-port Directional Control Valves . __________________________________________________________________________________________ GS ISO 4407 : 2002Ψ 23.60.100.Fluid Contamination . the pressure differential caused by the flow through any given path in a hydraulic fluid power valve.30 Published by GSA in 2006 Fluid Power Systems and Components .30 Published by GSA in 2006 Fluid Power Systems and Components . __________________________________________________________________________________________ GS ISO 4399 : 1995Ψ 23. nightwear and shirts that are classified as : a) covering the upper body only. suitable for providing a basis for comparing the noise levels of pumps.Test Code for Determination of Airborne Noise Levels Part 1: Pumps 20 Pages Gr 2 This standard establishes a test code describing procedures.020 Published by GSA in 2007 Textiles . __________________________________________________________________________________________ GS ISO 4413 : 1998Ψ Published by GSA in 2006 Hydraulic Fluid Power .100. __________________________________________________________________________________________ GS ISO 4414 : 1998Ψ Published by GSA in 2006 Pneumatic Fluid Power .Size designation of clothes .General Rules Relating to Systems 23.100. nightwear foundation garment and shirts that are classified as :a) covering the upper body only. or b) covering the whole body or c) covering the lower body only.01 68 Pages Gr 7 This standard provides general rules relating to hydraulic systems on machinery used in industrial manufacturing processes. under controlled conditions of installation and operation. suitable for providing a basis for comparing the noise levels of pumps. foundation garments and shirts 7 Pages Gr 1 This standard establishes a system of designating the size of women's and girl's underwear garments. for the determination of the sound power levels of a hydraulic fluid power pump.Test code for Determination of Airborne Noise Levels 9 Pages Part 3: Pumps . __________________________________________________________________________________________ GS ISO 4415 : 1981Ψ 61.100. __________________________________________________________________________________________ GS ISO 4412-3 : 1991Ψ 23.020 2 Pages Gr 1 This standards establishes a system of designating the sizes of headwear __________________________________________________________________________________________ 185 .020 Published by GSA in 2007 Textiles . nightwear and shirts 8 Pages Gr 1 This standard establishes a system of designating the size of men's and boy's underwear. It is intended as a guide for both suppliers and purchasers. or b) covering the whole body or c) covering the lower body only.100.Men's and boy's underwear.Size designation of clothes .General Rules Relating to Systems 23.10 GS ISO 4412-1 : 1991Ψ Published by GSA in 2006 Hydraulic Fluid Power . and applies to civilian and uniform garments __________________________________________________________________________________________ GS ISO 4416 : 1981Ψ 61.01 61 Pages Gr 7 This standard provides general rules relating to pneumatic systems used in industrial manufacturing processes. under controlled conditions of installation and operation.Women's and girl's underwear.Headwear 61.Method using a Parallelepiped Microphone Array Gr 1 This standard describes procedures for the determination of the sound power levels of a hydraulic fluid power pump. It is intended as a guide for both suppliers and purchasers.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 23.10 Published by GSA in 2006 Hydraulic Fluid Power . based on IS0 2204. and applies to civilian and uniform garments __________________________________________________________________________________________ GS ISO 4417 : 1977Ψ Published by GSA in 2007 Textiles .Size designation of clothes . Specification Part 1 : General 13 Pages Gr 2 This standard specifies the general aspects of pipes.220. __________________________________________________________________________________________ 186 .040.Metric Series Gr 1 This standard specifies the metric series of diameters to be used and the dimensions which are common to all types of unplasticized polyvinyl chloride (PVC) adaptor fittings 1 ) for pipes under pressure. made of unplasticized poly (Vinyl chloride) (PVC_U) __________________________________________________________________________________________ GS ISO 4422-5 : 1997Ψ 83.220.30. __________________________________________________________________________________________ GS ISO 4512 : 2000Ψ 75.140. the apparatus and the procedure for a Saline droplets corrosion test for assessment of the quality of metallic and non-organic coatings. made in accordance with the requirements of coating or product specifications on metallic Substrates. __________________________________________________________________________________________ GS ISO 4536 : 1985Ψ 25. joints.Part 1: 13 Pages General Gr 2 This standard specifies the required properties of pipes made from polyethylene (PE).20 Published by GSA in 2006 Metallic and Non-organic Coatings on Metallic /Substrates 4 Pages Saline Droplets Corrosion Test (SD test) Gr 1 This standard specifies the test Solution. to secure the connection to existing metal pipes and/or fittings with pipe threads.General Rules for Corrosion Tests Applicable for Storage Conditions 5 Pages Gr 1 This standard gives guidance on methods of corrosion testing of protective metallic. 91.140. fittings and auxiliaries made of unplasticized poly (Vinyl chloride) PVC_U) __________________________________________________________________________________________ GS ISO 4427-1 : 2007Ψ 83. in heated and unheated storage rooms in all microclimates with or without control of climatic Parameters.Equipment for Measurement of Liquid Levels in Storage Tanks — Manual Methods 26 Pages Gr 3 This standard specifies the requirements for the equipment required to measure manually the liquid level or the corresponding volume of petroleum and petroleum products stored in tanks and containers.30 Published by GSA in 2006 Pipes and Fittings made of Unplasticized Poly (V inyl Chloride) (PVC-U) for Water 3 Pages Supply.20 Published by GSA in 2006 Metallic and other Non-organic Coatings .Specification Part 5: Fitness for Purpose of the system Gr 1 This standard specifies the requirements for the determination of the fitness for the purpose of a piping system composed of pipes.60 Replaces GS ISO 4427 :1996 Published by GSA in 2006 Plastics Piping Systems .140 GS ISO 4422-1 : 1996Ψ Published by GSA in 2006 Pipes and Fittings made of Unplasticized Poly (Vinyl Chloride) (PVC -U) for Water Supply .45 Published by GSA in 2006 Unplasticized Polyvinyl Chloride (PVC) Adaptor Fittings for Pipes under Pressure 3 Pages Laying Length and Size of Threads . conversion and other nonorganic coatings.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 83.joints fittings (post-formed and moulded) and ancillaries. __________________________________________________________________________________________ GS ISO 4543 : 1981Ψ 25.Polyethylene (PE) Pipes and Fittings for Water Supply . __________________________________________________________________________________________ GS ISO 4434 : 1977Ψ 23.30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products . with or without additive protection.180.140. and of Intensity of Uniform Change in Appearance 3 Pages Part 1: General Introduction and Designation System Gr 1 Defines a system for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system used throughout ISO 4628.Evaluation of Degradation of Coatings . __________________________________________________________________________________________ GS ISO 4587 : 2003Ψ 83. for example yellowing. This test procedure does not provide design information. This system is intended to be used.040 Published by GSA in 2005 Paints and Varnishes .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4578 : 1997Ψ 83. and of Intensity of Uniform changes in 3 Pages Appearance Part 6: Rating of Degree of Chalking by Tape Method Gr 1 Provides pictorial reference standards for designating the degree of chalking of paint coatings.180 Published by GSA in 2006 Adhesives .040 Published by GSA in 2005 Paints and Varnishes . __________________________________________________________________________________________ GS ISO 4628-1 : 2003Ψ 87.Evaluation of Degradation of Coatings Designation of Quality and Size of Defects. and for uniform changes such as colour changes. __________________________________________________________________________________________ GS ISO 4628-2 : 2003Ψ 87.180 Published by GSA in 2006 Adhesives . in particular.040 Published by GSA in 2007 Paints and Varnishes . using the designation system defined in GS ISO 4628-1. and of Intensity of Uniform changes in Appearance Part 2 : Assessment of Degree of Blistering Gr 2 It describes a method for assessing the degree of blistering of coatings by comparison with pictorial standards __________________________________________________________________________________________ GS ISO 4628-3 : 2003Ψ 87.Determination of Peel Resistance of High-Strength Adhesive Bonds Floating-roller Method 6 Pages Gr 1 This standard specifies a floating-roller method for the determination of the peel resistance of high-strength adhesive bonds between a rigid adherent and a flexible adherent when tested under specified conditions of preparation and testing.Designation of Quality 12 Pages and Size of Defects. for defects caused by ageing and weathering. lt also describes a method by which the degree of chalking is rated. __________________________________________________________________________________________ GS ISO 4628-6 : 2007Ψ 87. __________________________________________________________________________________________ 187 .Evaluation of Degradation of Coatings .Determination of Tensile Lap-shear Strength of Rigid-to-rigid Bonded 4 Pages Assemblies Gr 1 This standard specifies a method for determining the tensile lap-shear strength of rigid-to-rigid bonded assemblies using a standard specimen under specified conditions of preparation and testing.Designation of Quality and Size of Defects.Evaluation of Degradation of Coatings .040 Published by GSA in 2005 Paints and Varnishes .Designation of Quality and Size of Defects and of Intensity of Uniform Changes in Appearance 13 Pages Part 3: Assessment of Degree of Rusting Gr 2 Describes a method for assessing the degree of cracking of coatings by comparison with pictorial standards. Determination of Abrasion Resistance using A Rotating Cylindrical Drum Device 16 Pages Gr 2 This standard specifies two methods for the determination of the resistance of rubber to abrasion by means of rotating cylindrical drum device __________________________________________________________________________________________ GS ISO 4671 : 2007Ψ 23. Rubber seals . sewerage and rainwater systems (continuous flow up to 45 °C and intermittent flow up to 95 °C).40 Published by GSA in 2010 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 11Pages Gr 1 This standard specifies methods of measuring the inside diameter.Determination of Tear Resistance 11 Pages Part 1 : Constant Rate of Tear Methods Gr 2 This standard describes two methods for determining the forces necessary to initiate and propagate tearing of a coated fabric using the constant rate of tear method.Sub-Ambient Temperature Flexibility Tests 23. concentricity and lining and cover thickness of hoses.50. 83. application and requirements __________________________________________________________________________________________ GS ISO 4641 : 2005Ψ 23.060 Published by GSA in 2007 Rubber. __________________________________________________________________________________________ GS ISO 4649 : 2002Ψ 83.Joint Rings for Water Supply. Vulcanized or Thermoplastic .40 Published by GSA in 2006 Rubber . The different designations of seals specified are defined according to their type.040.140. 91.60.080.Coated Fabrics . wall thickness. and a method of verifying the through-bore of hydraulic hose __________________________________________________________________________________________ GS ISO 4672 : 1997Ψ Published by GSA in 2007 Rubber and Plastics Hoses . __________________________________________________________________________________________ 188 .70.70 Published by GSA in 2006 Rubber Hoses and Hose Assemblies for Water Suction and Discharge . outside diameter (including diameter over reinforcement of hydraulic hoses).70 6 Pages Gr 1 This standard specifies two methods for assessing whether a rubber or plastics hose retains adequate flexibility at sub . methods of measurement and identification of the lengths of hoses and hose assemblies. smooth-bore rubber water-suction and discharge hoses and hose assemblies.Specification 10 Pages Gr 1 This standard specifies the minimum requirements for textile-reinforced.140. Drainage and Sewerage Pipelines 12 Pages Specification for Materials Gr 2 This standards specifies requirements for materials used in vulcanized rubber seals for a) cold drinking-water supplies (up to 50 °C). b) drainage.or Plastics .140.040.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4633 : 2002Ψ 83.040.ambient temperatures __________________________________________________________________________________________ GS ISO 4674-1 : 2003Ψ 59. (LPG).01 Published by GSA in 2006 Cross Recesses for Screws 9 Pages Gr 1 This standard defines two types of cross recesses for screws: Scope and field of application. procedure and test at manufacture of refillable welded-steel gas cylinders of a test pressure not greater than 60 bar1).Most Probable 11 Pages Number Technique Gr 2 This standard gives general guidelines for the enumeration of coliforms present in products intended for human consumption or feeding of animals __________________________________________________________________________________________ 189 . B and C Gr 6 This standard specifies a selection of tolerances for bolts.060. They apply to standardized or non-standardized threaded parts if they are specified at the time of order.30 Published by GSA in 2005 Microbiology . construction and workmanship. but may also be applied for LPG. __________________________________________________________________________________________ GS ISO 4757 : 1983Ψ 21.Gasket Material .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4706 : 2008Ψ 23.Included in this Standard is a method of penetration gauging for both types.100. screws.. 79. B and C and for tapping screws with product grade A. __________________________________________________________________________________________ GS ISO 4759-3 : 2000Ψ 21. and of water capacities from 0.060.Test Methods 7 Pages Gr 1 This standard specifies test methods to determine the characteristics of agglomerated composition cork intended to be used as gaskets in mechanical industry.5 l up to and including 500 l exposed to extreme worldwide temperatures (−50 °C to +65 °C) used for compressed.recess type 2. design.Product Grades A and C 6 Pages Gr 1 This standard establishes a selection of tolerances for use in the preparation of ISO product standards for punched plain washers of product grades A and C. for use with bolts.020. studs and nuts with ISO metric threads and with product grades A.30 Published by GSA in 2010 Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below 33 Pages Gr 4 This standard specifies the minimum requirements concerning material selection. __________________________________________________________________________________________ GS ISO 4708 : 2000Ψ 21.01 Published by GSA in 2006 Tolerances for Fasteners 58 Pages Part 1: Bolts. liquefied or dissolved gases.g. __________________________________________________________________________________________ GS ISO 4753 : 1999Ψ 21.060. Screws.100 Published by GSA in 2006 Composition Cork . __________________________________________________________________________________________ GS ISO 4831 : 2006Ψ 07.140. screws and nuts of nominal thread diameters of from 1 mm to 150 mm inclusive.Ends of Parts with External ISO Metric Thread 5 Pages Gr 1 This standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e. __________________________________________________________________________________________ GS ISO 4759-1 : 2000Ψ 21. Studs and Nuts .01 Published by GSA in 2006 Tolerances for Fasteners Part 3: Plain Washers for Bolts..Product Grades A.recess type H. bolt and screw ends) recommended for use.01 Published by GSA in 2006 Fasteners .General Guidance for the Enumeration of Coliforms . Screws and Nuts .060. 40.Count Technique at 30 ºC 9 Pages Gr 1 This standard specifies a horizontal method for the enumeration of microorganisms.140.77. 25 Pages Gr 3 This standard gives the specifications .40 Published by GSA in 2006 Road Vehicles .30 Published by GSA in 2007 Flat Rolled Steel Products for Welded Gas Cylinders 4 Pages Gr 1 This standard specifies the characteristics of flat rolled steel products with a thickness up to 6 mm of the unalloyed steels listed in table 1 which are intended for welded gas cylinders with a normalized structure.040.Determination of Tuft Withdrawal Force 59.Non-Petroleum-Base Reference Fluids 2 Pages Gr 1 This standard specifies the composition and characteristics of a reference fluid used for the compatibility testing of hydraulic braking systems and components mounted on road vehicles. __________________________________________________________________________________________ GS ISO 4978 : 1983Ψ 77.20 43 Pages Gr 5 This standard defines the terms used in the heat treatment of ferrous products. __________________________________________________________________________________________ 190 .requirements and test methods . by counting the colonies growing in a solid medium after aerobic incubation at 30 °C.020 Published by GSA in 2006 Road Vehicles . Subject to the limitations discussed in the introduction. __________________________________________________________________________________________ GS ISO 4926 : 2006Ψ 43. __________________________________________________________________________________________ GS ISO 4885 : 1996Ψ Published by GSA in 2006 Ferrous Products .040.040.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4833 : 2003Ψ 07.60 3 Pages Gr 1 This standard specifies a method for determination of tuft withdrawal force and is applicable to all carpets with a cut or loop pile yarn structure.Specification of Non-Petroleum-Base Brake Fluids for Hydraulic Systems. __________________________________________________________________________________________ GS ISO 4863 : 1984Ψ 21. this standard is applicable to products intended for human consumption or the feeding of animals.120 Published by GSA in 2006 Resilient Shaft Couplings . 75.Heat Treatments .Vocabulary 01.Information to be Supplied by 3 Pages Users and Manufacturers Gr 1 This standard specifies the information to be supplied by users and manufacturers of resilient shaft couplings in order to facilitate communication and understanding between users and manufacturers.080.Horizontal Method for the Enumeration of Micro-organisms .Hydraulic Braking Systems .for non-petroleum base fluids used in road-vehicle hydraulic brake and clutch systems.100.080. 77.30 Published by GSA in 2005 Microbiology Food and Animal Feeding Stuffs .Colony . __________________________________________________________________________________________ GS ISO 4925 : 2005Ψ 43. __________________________________________________________________________________________ GS ISO 4919 : 1978Ψ Published by GSA in 2006 Carpets . 27. and manual and machine cutting blowpipes with a cutting range up to 300 mm.30 Published by GSA in 2010 Gas welding equipment — Blowpipes for gas welding. It also covers use for dissolved acetylene and for liquefied gases under pressure. It applies to manual blowpipes for welding and heating with a nominal thermal power up to 32 000 kcal/h. __________________________________________________________________________________________ GS ISO 5172 : 2006Ψ 25.30 Published by GSA in 2010 Gas welding equipment — Pressure gauges used in welding.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 4998 : 2005Ψ Published by GSA in 2006 Continuous Hot .dip zinc and zinc . and the test methods to be applied for determination of the various ratings.00 Published by GSA in 2006 Non-ducted Air Conditioners and Heat Pumps .and water-cooled condensers and heat Pumps employing air-cooled condensers are based. garments or other textile articles when subjected to an appropriate combination of specified washing and drying procedure __________________________________________________________________________________________ GS ISO 5145 : 2004Ψ 23. heating and cutting of metals. cutting and allied processes 13 Pages Gr 2 This standard specifies requirements for Bourdon-tube pressure gauges normally used with compressed gas systems at pressures up to 30 MPa (300 bar) in welding.140. __________________________________________________________________________________________ GS ISO 5149 : 1993Ψ 27.200 Published by GSA in 2008 Mechanical Refrigerating Systems used for Cooling and Heating .Coated Carbon Steel Sheet of Structural Quality 77. It applies to the selection of gas cylinder valve outlet connections and specifies the dimensions for a number of them.00.50 13 Pages Gr 2 This standard applies to continuous hot .020.iron . cutting and allied processes.080. __________________________________________________________________________________________ GS ISO 5171 : 2009Ψ 25. __________________________________________________________________________________________ 191 . heating and cutting — 45 Pages Specifications and tests Gr 5 This standard specifies specifications and tests for blowpipes for gas welding.01 3 Pages Gr 1 Specifies a method for determination of the dimensional change of fabrics.30 Published by GSA in 2006 Cylinder Valve Outlets for Gases and Gas Mixtures 29 Pages Selection and Dimensioning Gr 3 This standard establishes practical criteria for determining valve outlet connections for gas cylinders.coated carbon steel sheet of structural quality __________________________________________________________________________________________ GS ISO 5077 : 2007Ψ Published by GSA in 2005 Textiles .Determination of Dimensional Change in Washing and Drying 59.Testing and Rating for Performance 43 Pages Gr 5 This standard specifies the standard conditions on which the ratings of Single-package and Split-System non-ducted air conditioners employing air.Dip Zinc .Safety Requirements 34 Pages Gr 5 The standard specifies the requirements relating to the safety of persons and property for the design.160. installation and operation of refrigerating systems __________________________________________________________________________________________ GS ISO 5151 : 1994Ψ 23.080. construction.120.160.alloy . 40 Published by GSA in 2007 Destructive Tests on Welds in Metallic Materials — Longitudinal Tensile Test on Weld 6 Pages Metal in Fusion Welded Joints Gr 1 This standard specifies the sizes of test specimens and the test procedure for carrying out longitudinal tensile tests on cylindrical test specimens in order to determine the mechanical properties of weld metal in a fusion welded joint.General Specifications. requirements and tests of safety devices for fuel gases and oxygen or compressed air used downstream of cylinder or Pipeline outlet regulators and of Pipeline outlet valves.30 Published by GSA in 2006 Resistance Welding Equipment . __________________________________________________________________________________________ 192 .Bend Tests 25.160.Safety Devices for Fuel Gases and Oxygenor Compressed Air . and upstream of blowpipes for welding. Requirements and Tests Gr 1 8 Pages This standard lays down the general specifications.Electrode Adaptors.160.50 5 Pages Gr 1 This standard specifies a varying gap test piece and a testing method for assessing the influence of the various parameters which tan influence brazing during manufacture as a function of clearances. __________________________________________________________________________________________ GS ISO 5179 : 1983Ψ Published by GSA in 2006 Investigation of Brazeability Using a Varying Gap Test Piece 25. Male Taper 1:10 Part 1: Conical Fixing.160.30 Published by GSA in 2006 Resistance Spot Welding . __________________________________________________________________________________________ GS ISO 5175 : 1987Ψ 25. face and side bend tests on test specimens taken from butt welds.160. __________________________________________________________________________________________ GS ISO 5182 : 2008Ψ Published by GSA in 2010 Resistance welding — Materials for electrodes and ancillary equipment 25.160.160.40 22 Pages Gr 3 This standard specifies a method for making transverse root. Taper 1:10 6 Pages Gr 1 This standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap (see GS ISO 5821) is a male taper of 1:10 and for which the electrode taper fits in conformance with ISO 1089. __________________________________________________________________________________________ GS ISO 5183-2 : 2000Ψ 25.30 Published by GSA in 2006 Equipment used in Gas Welding. cutting and allied processes. Cutting and AlliedProcesses . butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds in order to assess ductility and/or absence of imperfections on or near to the surface of the joint. __________________________________________________________________________________________ GS ISO 5178 : 2001Ψ 25. __________________________________________________________________________________________ GS ISO 5183-1 : 1998Ψ 25.160. Male Taper 1:10 Part 2 : Parallel Shank Fixing for End-thrust Electrodes 4 Pages Gr 1 This standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap (see GS ISO 5821) is a male taper of 1:10 and a parallel shaft is used to fix the adaptor to the electrode holder in accordance with ISO 8430-3.20 10 Pages Gr 1 This standard specifies the characteristics of materials for resistance welding electrodes and ancillary equipment which are used for carrying current and transmitting force to the work.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5173 : 2000Ψ Published by GSA in 2006 Destructive Tests on Welds in Metallic Materials .Electrode Adaptors. __________________________________________________________________________________________ GS ISO 5209 : 1977Ψ Published by GSA in 2006 General Purpose Industrial Valves . taps and stub ends with quality requirements as used for piping work.e.060 57 Pages Gr 6 This standard specifies the requirements for Class II centrifugal pumps of single-stage. horizontal or vertical construction. with any drive and any installation for general application. Markings on the body may be integral with the body or on a plate securely fixed to the body. tees.Marking 23. i. __________________________________________________________________________________________ GS ISO 5210 : 1991Ψ 23. concentric and eccentric reducers.Mechanical Test Methods Gr 2 This standard defines the principles and the technique of the tests designed to determine the conventional mechanical characteristics of assemblies produced with soft solders and brazing filler metals.Class II 23. or on an identification plate. __________________________________________________________________________________________ GS ISO 5187 : 1985Ψ 25.40 Published by GSA in 2006 Steel Pipes and Fittings for Buried or Submerged Pipelines 54 Pages External and Internal Coating by Bitumen or Coal Tar derived Materials Gr 6 This standard specifies the bitumen and coal tar derived coatings suitable for protecting the external and internal surfaces of steel pipes and fittings.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5184 : 1979Ψ Published by GSA in 2006 Straight Resistance Spot Welding Electrodes 25.20 2 Pages Gr 1 This standard lays down the dimensions and tolerantes of straight resistance spot welding electrodes. it also specifies a method of interpreting the results obtained.060 Published by GSA in 2006 Industrial valves .g. or underground galleries. on the body. __________________________________________________________________________________________ GS ISO 5199 : 2002Ψ Published by GSA in 2006 Technical Specifications for Centrifugal Pumps . either individually crafter assembly. on a flange. those conforming to ISO 2858) are typical of those covered by this Standard. __________________________________________________________________________________________ GS ISO 5251 : 1981Ψ 23. __________________________________________________________________________________________ GS ISO 5256 : 1985Ψ 23. multistage.040.040. and also the conditions for the application of such protective coatings.40 Published by GSA in 2006 Stainless Steel Butt-welding Fittings 25 Pages Gr 3 This standard specifies the dimensions.Assemblies made with Soft Solders and Brazing Filler 11 Pages Metals . tolerantes and generally used grades of stainless steel for butt-welding bends [type 3D (90” and Wo) with and without straight ends and type 5D Wo)]. and used in buried pipelines or conduits.160.01 2 Pages Gr 1 This standard specifies mandatory and optional markings of general purpose industrial valves and states the manner of applying the markings.160. or submerged. Pumps used in the chemical process industries (e. __________________________________________________________________________________________ 193 .Multi-turn valve actuator attachments 8 Pages Gr 1 This standard specifies the requirements for the attachment of multi-turn actuators to valves.50 Published by GSA in 2006 Welding and Allied Processes . __________________________________________________________________________________________ GS ISO 5294 : 1989Ψ 21.040. __________________________________________________________________________________________ GS ISO 5292 : 1995Ψ Published by GSA in 2006 Belt Drives .01 Published by GSA in 2006 Belt Drives . L.21.Metric Dimensions 4 Pages Gr 1 This standard specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives) for mechanical power transmission and where positive indexing or synchronization may be required. CJ and DJ (Effective System) Gr 1 This standard specifies the principal characteristics of grooved pulleys (for groove sections AJ.Pulleys 10 Pages Gr 1 This standard specifies the principal characteristics of synchronous pulleys for use in synchronous endless belt drives) for mechanical power transmission and where positive indexing or synchronization may be required. __________________________________________________________________________________________ 194 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5288 : 2001Ψ Published by GSA in 2006 Synchronous Belt Drives .220. __________________________________________________________________________________________ GS ISO 5296-1 : 1989Ψ 21. __________________________________________________________________________________________ GS ISO 5291 : 1993Ψ 21.Calculation of Power Ratings 21. intended to take joined classical V-belts for industrial power transmission drives.10 Published by GSA in 2006 Synchronous Belt Drives .Belts Part 1: Pitch Codes MXL.Calculation of Power Rating and Drive Centre Distance 21.10 Published by GSA in 2006 Synchronous Belt Drives .220.10 2 Pages Gr 1 This standard specifies generally acceptable formulae for power ratings.Vocabulary 01. together with appropriate correction terms and factors used in the design of industrial V-belt and V-ribbed belt drives with two pulleys. XL.Belts Part 2:Pitch Codes MXL and XXL . H.10 3 Pages Gr 1 This standard establishes formulae for the calculation of power rating and centre distance of Standard synchronous belts on two pulley drives.220. BJ. BJ.Metric 8 Pages and Inch Dimensions Gr 1 This standard specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives) for mechanical power transmission and where positive indexing or synchronization may be required.Grooved Pulleys for Joined Classical V-belts 5 Pages Groove Sections AJ.220.V-belts and V-ribbed Belts . __________________________________________________________________________________________ GS ISO 5295 : 1987Ψ Published by GSA in 2006 Synchronous Belts . CJ and DJ).220.10 14 Pages Gr 2 This standard specifies the terms and definitions related to the use of endless synchronous belt drives for mechanical power transmission and where positive indexing or synchronization is required. XH and XXH .10 Published by GSA in 2006 Synchronous Belt Drives . 21. __________________________________________________________________________________________ GS ISO 5296-2 : 1989Ψ 21.220.220. 040.140 20 Pages Gr 2 This standard establishes standards for the safe design.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5377 : 1981Ψ 67. by the Kjeldahl method.for the determination of the sulfur dioxide content of starches and derived products __________________________________________________________________________________________ GS ISO 5381 : 1983Ψ 67.Classification 23.Acidimetric 6 Pages Method and Nephelometric Gr 1 This standard specifies two methods.Modified Karl Fischer Method Gr 1 This standard specifies a method for the determination of the water content of starch hydrolysis products.025 % (m/m).Safety Rules and Code of Practice 23. construction.Vocabulary 01. It specifies requirements to help minimize compressor accidents and defines general safety practices for the field.180.20 Published by GSA in 2007 Starch and Derived Products . A list of Russian equivalent terms is given in annex A __________________________________________________________________________________________ 195 .Determination of Water 6 Pages Content . __________________________________________________________________________________________ GS ISO 5390 : 1977Ψ Published by GSA in 2006 Compressors . __________________________________________________________________________________________ GS ISO 5379 : 1983Ψ 67.180.Spectrophotometric Method Gr 1 This standard specifies a spectrophotometric method for the determination.Lane and Eynon Constant Titre Method 6 Pages Gr 1 This standard specifies a lane and Eynon constant titre method for the determination of the reducing power and dextrose equivalent of all starch hydrolysis products __________________________________________________________________________________________ GS ISO 5378 : 1978Ψ 67.Determination of Nitrogen 3 Pages Content by the Kjeldahl Method .20 Published by GSA in 2007 Starch and Derived Products .21 10 Pages Gr 1 This standard provides fundamental terms and definitions in English and French applicable to cylindrical screw threads with profiles (in an axial plane) based on triangles. of the nitrogen content of starch and its derived products whose presumed nitrogen content is less than 0. __________________________________________________________________________________________ GS ISO 5388 : 1981Ψ Published by GSA in 2006 Stationary Air Compressors .Determination of Sulfur Dioxide Content.In starches and their derived products to which nitrogenous materials have not been added.an acidimetric method and a nephelometric method.180. installation and operation of stationary and skid-mounted air compressors for general use. the nitrogen is present essentially in the form of Protein and/or amino acids.140 6 Pages Gr 1 This standard gives a classification of various types of compressors and some definitions __________________________________________________________________________________________ GS ISO 5408 : 1983Ψ Published by GSA in 2006 Cylindrical Screw Threads .20 Published by GSA in 2007 Starch and Derived Products .l) NOTE .180.Determination of Reducing Power and Dextrose Equivalent.20 Published by GSA in 2007 Starch Hydrolysis Products . __________________________________________________________________________________________ GS ISO 5456-2 : 1996Ψ 01.Projection Methods 6 Pages Part 2: Orthographic Representations Gr 1 This standard specifies basic rules for the application of orthographic representation to all types of technical drawings in all technical fields.Part 4: Central Projection 01. __________________________________________________________________________________________ 196 . __________________________________________________________________________________________ GS ISO 5509 : 2000Ψ 67. It also gives the maximum diameter of the chuck nose.200.Projection Methods .10 Published by GSA in 2006 Technical Drawings . using packed or capillary columns.100.20 Published by GSA in 2006 Geometrical Product Specifications (GPS) .Positional Tolerancing 11 Pages Gr 2 This standard describes positional tolerancing. the centre of a sphere.10 33 Pages Gr 4 This standard specifies basic rules for the development and application of central projection in technical drawings. This tolerancing method is applied to the location of a point.10 Published by GSA in 2006 Technical Drawings . __________________________________________________________________________________________ GS ISO 5456-3 : 1996Ψ 01. e.Geometrical Tolerancing .g. __________________________________________________________________________________________ GS ISO 5456-4 : 1996Ψ Published by GSA in 2006 Technical Drawings .060.200. IS0 129. IS0 3461-2 and IS0 5456-l.20 Published by GSA in 2006 Tool Chucks (end mill holders) with Clamp Screws for Flatted Cylindrical Shank Tools Part 1: Dimensions of the Driving System of Tool Shanks 5 Pages Gr 1 This standard lays down the dimensions of tool chucks (end mill holders) with clamp screws designed for driving flatted cylindrical shanks in accordance with ISO 3338-2 and specifies the clamp screws used. according to the general rules specified in IS0 128.Analysis by Gas Chromatography of Methyl Esters 7 Pages of Fatty Acids Gr 1 This standard gives general guidance for the application of gas chromatography.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . to determine the qualitative and quantitative composition of a mixture of fatty acid methyl esters obtained in accordance with the method specified in GS ISO 5509.100.100. IS0 3098-1. the axis of a hole or shaft and the median surface of a slot.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .100. of a line nominally straight and of a surface nominally plane.Preparation of Methyl Esters of Fatty Acids 24 Pages Gr 3 This standard specifies methods of preparing the methyl esters of fatty acids.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5414-1 : 2002Ψ 25.Projection Methods 7 Pages Part 3: Axonometric Representations Gr 1 This standard specifies basic rules for the application of the recommended axonometric representations for all types of technical drawings. __________________________________________________________________________________________ GS ISO 5458 : 1998Ψ 01. __________________________________________________________________________________________ GS ISO 5508 : 1990Ψ 67. vegetables and derived products __________________________________________________________________________________________ 197 .1.080. __________________________________________________________________________________________ GS ISO 5519 : 1978Ψ 67. vegetables and derived products and two techniques for determining the sorbic acid extracted __________________________________________________________________________________________ GS ISO 5520 : 1981Ψ 67. Vegetables and Derived Products .080.080.01 Published by GSA in 2006 Fruit. vegetables and derived products __________________________________________________________________________________________ GS ISO 5521 : 1981Ψ 67. Vegetables and Derived Products .Ashing Method Gr 1 This standard specifies a method for the decomposition of the organic matter in fruits. vegetables or derived products by wet digestion. __________________________________________________________________________________________ GS ISO 5517 : 1978Ψ 67. vegetables and derived products.Qualitative Method for the Detection of 2 Pages Sulphur Dioxide Gr 1 This standard specifies a qualitative method for the detection of free or bound sulphur dioxide in fruits.080. Vegetables and Derived Products .10 3 Pages Phenan throline Phtotometric Method Gr 1 This standard specifies a 1.Determination of Iron Ceontent .10-phenanthroline photometric method for the determination of the iron cotent of fruits. vegetables and derived products __________________________________________________________________________________________ GS ISO 5518 : 2007Ψ 67.080.01 Published by GSA in 2006 Fruuits.Determination of Benzoic Acid Content Spectrophotometric Method 3 Pages Gr 1 This standard specifies a method for determining the benzoic acid content of fruits.Determination of Sorbic Acid Content 6 Pages Gr 1 This standard specifies a method for extracting sorbic acid present in fruits. Vegetables and Derived Products .01 Published by GSA in 2006 Fruits.01 Published by GSA in 2006 Fruits.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5515 : 1979Ψ 67.01 Published by GSA in 2006 Fruits.080. prior to the analysis of their mineral (metal) content __________________________________________________________________________________________ GS ISO 5516 : 1978Ψ 67.080.Wet Method 3 Pages Gr 1 This standard specifies a method for the decomposition of the organic matter in fruits. Vegetables and Derived Products . Vegetables and Derived Products Decomposition of Organic Matter prior to 2 Pages Analysis .Determination of Alkalinity of Total Ash and of Water-Soluble Ash 3 Pages Gr 1 This standard specifies a method for the determination of the alkalinity of the total ash and a method for the determination of the alkalinity of the water-soluble ash from fruits.01 Published by GSA in 2006 Fruits.01 Published by GSA in 2006 Fruits. Vegetables and Derived Products .Decomposition of Organic Matter Prior to Analysis . 10 25 Pages Gr 3 This standard describes methods of sampling crude or processed animal and vegetable fats and oils.10 6 Pages Gr 1 This standard describes a method for the determination of the water content of milk fat products by the Karl Fischer (KF) method.Karl Fischer Method 67.Determination of Starch Content . __________________________________________________________________________________________ GS ISO 5558 : 1982Ψ 67.01 Published by GSA in 2006 Fruits.Thin 3 Pages Layer Chromatographic Method Gr 1 This standard specifies a thin-layer chromatographic method for the detection and identification of the antioxidants in animal and vegetable fats and oils __________________________________________________________________________________________ 198 . vegetables and derived products.Determination of Total Sulphur Dioxide Content 7 Pages Gr 1 This standard specifies a method for the determination of the total sulphur dioxide content of fruits.100.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .Detection and Identification of Antioxidants .120.10 5 Pages Gr 1 This standard specifies a reference method for the determination of the starch content of meat products.Determination of Total Solids Content (Reference 7 Pages Method) Gr 1 Specifies the reference method for the determination of the total solids content of cheese and processed cheese. whatever the origin and whether liquid or solid. __________________________________________________________________________________________ GS ISO 5555 : 2001Ψ Published by GSA in 2006 Animal and Vegetable Fats and Oils .080.(Reference Method) 67.Determination of Total Sulphur Dioxide Content 3 Pages (Routine Method) Gr 1 This standard specifies a routine method for the determination of the sulphur dioxide content of liquid fruit and vegetable products __________________________________________________________________________________________ GS ISO 5534 : 2004Ψ 67.Determination of Water Contents . Vegetables and Derived Products .200.30 Published by GSA in 2005 Cheese and Processed Cheese .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5522 : 1981Ψ 67.01 Published by GSA in 2006 Liquid Fruit and Vegetable Products .200. whatever the sulphur dioxide __________________________________________________________________________________________ GS ISO 5523 : 1981Ψ 67. __________________________________________________________________________________________ GS ISO 5536 : 2002Ψ Published by GSA in 2005 Milk Fat Products .Sampling 67. __________________________________________________________________________________________ GS ISO 5554 : 1978Ψ Published by GSA in 2007 Meat Products .100.080. It also describes the apparatus used for this process. 10 9 Pages Gr 1 Specifies requirements for dehydrated onion (Allium cepa Linnaeus) in its various commercial forms.220. in whole or in ground form.10 5 Pages Gr 1 Specifies requirements for dried leaves. __________________________________________________________________________________________ GS ISO 5564 : 1982Ψ 67. of peppermint.22. having biennial and annual fructification respectively.Specification 67. or broken or rubbed dried leaves.). __________________________________________________________________________________________ GS ISO 5566 : 1982Ψ Published by GSA in 2006 Turmeric . __________________________________________________________________________________________ GS ISO 5560 : 1997Ψ Published by GSA in 2005 Dehydrated Garlic ( Allium Sativum L. __________________________________________________________________________________________ GS ISO 5563 : 1984Ψ Published by GSA in 2005 Dried Peppermint (Mentha Piperita Linnaeus) . __________________________________________________________________________________________ 199 .10 10 Pages Gr 1 Specifies requirements for dehydrated garlic (Allium sativum L).220.Specification 67.Determination of Volatile Organic Sulphur Compounds 67. Whole or Ground Determination of Piperine Content . ) .10 2 Pages Gr 1 This standard specifies a spectrophotometric method for the determination of the colouring power of turmeric.220.Spectrophotometric Method 67.10 Published by GSA in 2006 Black Pepper and White Pepper.220. entier Gr 1 This standard specifies a spectrophotometric method for the determination of the piperine content of black or white pepper (Pipernigrum L. __________________________________________________________________________________________ GS ISO 5561 : 1990Ψ Published by GSA in 2005 Black Caraway and Blond Caraway (Carum carvi Linnaeus) .220.Spectrophotometric 2 Pages Method Pokre nok et pokre blanc.Determination of Colouring Power .10 3 Pages Gr 1 This standard specifies a method for the determination of volatile organic sulphur compounds in dehydrated garlic.10 4 Pages Gr 1 Specifies requirements for whole black and blond caraway (Carum Carvi Limnaeus).220.Specification 67.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5559 : 1995Ψ Published by GSA in 2005 Dehydrated Onion (Allium Cepa Linnaeus) .Specification 67. __________________________________________________________________________________________ GS ISO 5567 : 1982Ψ Published by GSA in 2006 Dehydrated Garlic . __________________________________________________________________________________________ GS ISO 5599-2 : 2001Ψ 23.45 Published by GSA in 2008 Water Quality . the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters. __________________________________________________________________________________________ GS ISO 5667-1 : 2006Ψ 13. effluents and bottom deposits.50 Published by GSA in 2006 Pneumatic Fluid Power .060.100.45 Published by GSA in 2008 Water Quality .Sampling Part 5: Guidance on Sampling of Drinking Water from Treatment Works and Piped 17 Pages Distribution Systems Gr 2 This standard established principles to be applied to the techniques of sampling water intended for human consumption. and provides guidance on.060.20 Published by GSA in 2006 Hydraulic Fluid Power . 13.060.20.06010 .Sampling Part 3: Guidance on the Preservation and Handling of Water Samples Gr 4 31 Pages This standard gives general guideline on the precautions o be taken to preserve and transport all water samples including those for biological analyses but not those intended for microbiological analysis __________________________________________________________________________________________ GS ISO 5667-4 : 1987Ψ 13. Natural and Man-Made 5 Pages Gr 1 This standard presents detailed principles to be applied to the design of sampling programmes.45 Published by GSA in 2008 Water Quality .Five-port Directional Control Valves 8 Pages Part 1: Mounting Interface Surfaces Without Electrical Connector Gr 2 This standard specifies the requirements for a mounting interface surface without electrical connector for fiveport pneumatic directional control valves.Dimensions and Tolerances 9 Pages Gr 1 This standard establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder rod and piston seal housings for reciprocating applications. 13. for use at a maximum rated pressure of [ 1)].Sampling Part 1: Guidance on the Design of Sampling Programmes and Sampling Techniques 31 Pages Gr 4 This standard sets out the general principles for. to sampling techniques and the handling and preservation of samples of water from natural and man-made lakes __________________________________________________________________________________________ GS ISO 5667-5 : 2006Ψ 13.100.o6o.Five-port Directional Control valves 14 Pages Part 2: Mounting Interface Surfaces with Optional Electrical Connector Gr 3 This standard specifies the requirements for a mounting interface surface with optional electrical connector for five-port pneumatic directional control valves. sludges. __________________________________________________________________________________________ 200 . __________________________________________________________________________________________ GS ISO 5599-1 : 2001Ψ 23.Cylinders .Housings for Piston and Rod Seals in Reciprocating Applications .100. for use at a maximum rated pressure of [ 1)]. __________________________________________________________________________________________ GS ISO 5667-3 : 2003Ψ 13.45 Published by GSA in 2008 Water Quality .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5597 : 1987Ψ 23.060.Sampling Part 4: Guidance on Sampling from Lakes.50 Published by GSA in 2006 Pneumatic Fluid Power . __________________________________________________________________________________________ GS ISO 5782-2 : 1997Ψ 23.30 Published by GSA in 2006 Pneumatic Fluid Power .45 Published by GSA in 2008 Water Quality .20. sampling techniques and the handling of water samples from rivers and streams for physical and chemical assessment.Fluid Logic Circuits Part 1:Symbols for Binary Logic and Related Functions 21 Pages Gr 3 This standard defines graphical Symbols for binary logic and related functions and gives some rules concerning their use in circuit diagrams.Face-to-face and Centre-to-face 11 Pages Dimensions Gr 2 This standard specifies the basic series of face-to-face or centre-to-face dimensions for two-way metal valves used in flanged pipe systems.30 Published by GSA in 2006 Fluid Power Systems and Components . Unloading Valves.100.100. sequence valves.060. __________________________________________________________________________________________ GS ISO 5782-1 : 1997Ψ 23. procedures and a method of presenting the results concerning the parameters which define the main characteristics to be included in the supplier's literature of filters conforming to ISO 5782-1.060. the dimensions and other characteristics of surfaces on which hydraulic pressure-reducing valves. unloading valves.Determination of Copper Content.100. __________________________________________________________________________________________ GS ISO 5752 : 1982Ψ 23.Photometric (Reference 11 Pages Method) Gr 2 This standard specifies a reference method for the determination of the copper content of milk and milk products. 20 Pages Throttle Valves and Check Valves Mounting Surfaces Gr 2 This standard specifies.Sampling Part 5: Guidance on Sampling of Rivers and Streams 16 Pages Gr 2 This standard set out the principles to be applied to the design of sampling programmes. __________________________________________________________________________________________ GS ISO 5781 : 2000Ψ 23. 13.080. Sequence Valves.30 Published by GSA in 2006 Pneumatic Fluid Power . in order to ensure interchangeability.060 Published by GSA in 2006 Metal Valves for use in Flanged Pipe Systems .100.Compressed Air Filters Part 2: Test Methods to Determine the Main Characteristics to be Included in Supplier's 5 Pages Literature Gr 1 This standard specifies tests. __________________________________________________________________________________________ GS ISO 5784-1 : 1988Ψ 01.Compressed Air Filters Part 1: Main Characteristics to be Included in Supplier's 7 Pages Literature and Product-marking Requirements Gr 1 This standard specifies which characteristics of compressed air filters are to be included in the supplier's literature. throttle valves and check valves are mounted. __________________________________________________________________________________________ 201 .01 Published by GSA in 2005 Milk and Milk Products .Pressure-reducing Valves.50 Published by GSA in 2006 Hydraulic Fluid Power .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5667-6 : 2005Ψ 13. __________________________________________________________________________________________ GS ISO 5738 : 2004Ψ 67. __________________________________________________________________________________________ GS ISO 5822 : 1988Ψ Published by GSA in 2006 Spot Welding Equipment .30 GS ISO 5784-2 : 1989Ψ Published by GSA in 2006 Fluid Power Systems and Components .160. Nickel. the viscosity of these being too high to allow for correct stirring when titrating __________________________________________________________________________________________ GS ISO 5817 : 2003Ψ 25.5 mm. except cationic starches and amyloids soluble when cold.180.30 4 Pages Gr 1 This standard specifies requirements for taper plug and ring gauges used for the checking of type A.180.30 Published by GSA in 2006 Fluid Power Systems and Components . It applies to material thickness above 0.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 01.Fluid Logic Circuits Part 2 : Symbols for Supply and Exhausts as Related to logic 5 Pages Symbols Gr 1 This standard specifies rules for the use of supply or exhaust symbols in basic logic systems needed by the user for better understanding of pipe connections.Taper Plug Gauges and Taper Ring Gauges 25. __________________________________________________________________________________________ GS ISO 5826 : 1999Ψ 25. __________________________________________________________________________________________ GS ISO 5809 : 1982Ψ Published by GSA in 2007 Starch and Derived Products .160. __________________________________________________________________________________________ GS ISO 5784-3 : 1989Ψ 01. It covers fully penetrated butt welds and all fillet welds. titanium and their alloys.160.080.Fluid Logic Circuits Part 3 : Symbols for Logic Sequencers and Related Functions 10 Pages Gr 1 This standard defines graphical Symbols for sequencers (step-by-step functions) and related functions and gives some rules concerning their use in circuit diagrams. The principles of this Standard may also be applied to partial-penetration butt welds.Determination of Sulphated Ash 67.20 Published by GSA in 2007 Starch and Derived Products . nickel.Determination of Chloride Content. Titanium and their Alloys (Beam 25 Pages Welding Excluded) — Quality Levels for Imperfections Gr 3 This standard provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel.080.Transformers .180 Published by GSA in 2006 Resistance Welding Equipment .20 3 Pages Gr 1 This standard specifies a method for the determination of sulphated ash in starches and derived products __________________________________________________________________________________________ GS ISO 5810 : 1982Ψ 67.Potentiometric 2 Pages Method Gr 1 The standard specifies a potentiometric method for the determination of the chloride content of starches and derived products. B and C tapers according to ISO 1089.30.General Specifications Applicable to all 23 Pages Transformers Gr 3 This standard give specifications applicable to transformers for resistance welding equipment without connected rectifier __________________________________________________________________________________________ 202 . 29.40 Published by GSA in 2007 Welding — Fusion-Welded Joints in Steel. 160. __________________________________________________________________________________________ GS ISO 5828 : 2001Ψ 25.060.30 9 Pages Gr 1 This standard specifies requirements for hand wheel or actuator-operated cast iron gate valves for general application.or plastics.30 Published by GSA in 2005 Cheese and Processed Cheese Products .coated fabrics to blocking __________________________________________________________________________________________ GS ISO 5996 : 1984Ψ Published by GSA in 2006 Cast Iron Gate Valves 23. __________________________________________________________________________________________ 203 .30 Published by GSA in 2006 Resistance Spot Welding .30 2 Pages Gr 1 This standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a female taper (male electrode cap. Female Taper 1 : 10 25. __________________________________________________________________________________________ GS ISO 5830 : 1984Ψ 25.080. __________________________________________________________________________________________ GS ISO 5829 : 1984Ψ Published by GSA in 2006 Resistance Spot Welding .Secondary Connecting Cables with Terminals Connected 4 Pages to Water-cooled Lugs .160. __________________________________________________________________________________________ GS ISO 5978 : 1990Ψ Published by GSA in 2006 Rubber or Plastics -Coated Fabrics.Dimensions and Characteristics Gr 1 This standard specifies dimensions and characteristics of secondary connecting cables which are air-cooled over their length and with terminals connected to water-cooled lugs.Electrode Adaptors.Male Electrode Caps 2 Pages Gr 1 This standard specifies the dimensions and tolerances for male electrode caps for resistance spot welding when a female taper (see IS0 1089) is used to fix the electrode adaptor (see IS0 5829).30 Published by GSA in 2006 Resistance Welding Equipment .Determination of Chloride Content Potentiometric Titration Method 5 Pages Gr 1 This standard specifies a potentiometric titration method for the determination of the chloride content of cheese and processed cheese products.100.Determination of Blocking Resistance 59.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 5827 : 1983Ψ Published by GSA in 2006 Spot Welding . __________________________________________________________________________________________ GS ISO 5943 : 2006Ψ 67.160.30 6 Pages Gr 1 This standard lays down the dimensions and specifies characteristics of spot welding electrode back-ups and clamps.40 2 Pages Gr 1 This standard specifies a method for the determination of the resistance of rubber. see IS0 5830) and for which the electrode taper fits conform to IS0 1089.Electrode Back-ups and Clamps 25.160. __________________________________________________________________________________________ GS ISO 6157-1 : 1988Ψ 21.10 2 Pages Gr 1 This standard specifies a routine method for the determination of the titratable acidity of all types of dried milk.040.100.01.Cylindrical Quick-action Couplings for Maximum Working 13 Pages Pressures of 10 bar. designed to convey saturated steam and hot water condensate. __________________________________________________________________________________________ GS ISO 6072 : 2002Ψ 23.Methods of Describing Equipment Characteristics Gr 1 9 Pages This standard defines the content of the information flow to be established between manufacturers and users of auxilliary tables with a view to working out related specifications .10 2 Pages Gr 1 This standard specifies a reference method for the determination of the titratable acidity of all types of dried milk.70 13 Pages Gr 2 This standard specifies requirements for two types of hoses and hose assemblies. 16 bar and 25 bar (1 Mpa.10 Published by GSA in 2006 Fasteners .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6070 : 1981Ψ 17. made of rubber and hose fittings made of metal.Plug Connecting Dimensions. __________________________________________________________________________________________ GS ISO 6134 : 2005Ψ Published by GSA in 2006 Rubber Hoses and Hose Assemblies for Saturated Steam — Specification 23. It allows baseline comparisons of fluids with standard elastomers. 83. It also lays down specifications and application guidelines.140. __________________________________________________________________________________________ 204 .060.01 Published by GSA in 2006 Hydraulic Fluid Power . Specifications.40 Published by GSA in 2006 Pneumatic Fluid Power . screws and studs for general requirements. __________________________________________________________________________________________ GS ISO 6091 : 1980Ψ Published by GSA in 2005 Dried Milk .100.Determination of Titratable Acidity (Reference Method) 67.100. I.Determination of Titratable Acidity (Reference Method) 67. __________________________________________________________________________________________ GS ISO 6092 : 1980Ψ Published by GSA in 2005 Dried Milk .100. Screws and Studs for General Requirements Gr 1 This standard establishes limits for various types of surface discontinuities on bolts. Application Guidelines and Testing Gr 2 This standard lays down the dimensions and tolerances so as to ensure the interchangeability of pneumatic quick-action coupling plugs.Surface Discontinuities 9 Pages Part 1: Bolts. and specifies the tests to be applied to the plugs together with sockets.5 Mpa) . low pressure with a maximum working pressure of 6 bar and high pressure with a maximum working pressure of 18 bar.6 Mpa and 2.Compatibility between Fluids and Standard Elastomeric 20 Pages Materials Gr 2 This standard specifies test methods for the evaluation of fluids exposed to standard elastomeric materials that have been manufactured in accordance with the specified processes. __________________________________________________________________________________________ GS ISO 6150 : 1988Ψ 23.160 Published by GSA in 2006 Auxilliary Tables for Vibration Generation . 10 Published by GSA in 2006 Fasteners . screws and studs for special requirements. __________________________________________________________________________________________ GS ISO 6222 : 1999Ψ 07.100.Organisms-Colony Count By 4 Pages Inoculation In A Nutrient Agar Culture Medium Gr 1 This standard specifies a method for the enumeration of culturable mico-organisms in water by counting the colonies formed in a nutrient agar culture medium after aerobic incubation at 36 degree celsius and 22 degree celsius.10 3 Pages Gr 1 This standard specifies the composition and properties of preferred cast aluminium alloys for use in solid plain bearings. Other alloys can be specified with agreement between manufacturer and user.70 Published by GSA in 2006 Thermoplastics Hoses. __________________________________________________________________________________________ GS ISO 6279 : 2006Ψ Published by GSA in 2010 Plain bearings — Aluminium alloys for solid bearings 21.Determination of Ash 75.10.Part 3 : Storage.Cylinder-rod wiper-Ring Housings in Reciprocating Applications .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6157-3 : 1988Ψ 21. handling and proper installation of rotary shaft lip type Seals. __________________________________________________________________________________________ GS ISO 6224 : 2005Ψ 23.Surface Discontinuities Part 1: Bolts. Handling and Installation 23. The range of rod diameters is from to 4mm to 350 mm.Specification Gr 1 5 Pages This standard specifies the requirements for three types of general-purpose textile-reinforced thermoplastic water-discharge hose with an operating temperature range of −10 °C to +60 °C and a maximum working pressure of 25 bar 1). lubricating oils.Dimensionsand Tolerances Gr 2 13 Pages This standard specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders.100. Screws and Studs for Special Requirements 13 Pages Gr 2 This standard establishes limits for various types of surface discontinuities on bolts.040. such as distillate and residual fuel oils. 77. __________________________________________________________________________________________ GS ISO 6194-3 : 1988Ψ Published by GSA in 2006 Rotary Shaft Lip Type Seals .60 7 Pages Gr 1 This standard gives lip seal users guidance on the careful storage.100. for General-Purpose Water Applications . __________________________________________________________________________________________ GS ISO 6195 : 2002Ψ 23.080 5 Pages Gr 1 This standard specifies a method for the determination of the ash content of petroleum products. Textile-reinforced.Enumeration of Culturable Micro.20 Published by GSA in 2008 Water Quality .150. __________________________________________________________________________________________ GS ISO 6245 : 2001Ψ Published by GSA in 2006 Petroleum Products . __________________________________________________________________________________________ 205 .100. waxes and other petroleum products.20 Published by GSA in 2006 Fluid Power Systems and Components . crude petroleum.060. attention is drawn to the hazards involved and ways of avoiding them are pointed out. in which any ash-foaming constituents present are normally considered to be undesirable impurities and contaminants. CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6280 : 1981Ψ 21. lt tan also be used for bearing diameters up to 160 mm.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .Derivation of Lang-time 5 Pages Stress Rupture Properties Gr 1 This standard defines a procedure for obtaining and for assessing the data necessary to establish long-time stress rupture values of steels for pressure purposes __________________________________________________________________________________________ GS ISO 6320 : 2000Ψ 67. Parts 1 to 6 .*3 Pages Iimit Gr 1 This standard specifies a method of determining the oo oI*-limit for the steel backing of thin-walled multilayer half bearings for bearing diameters up to 80 mm.1.060 Published by GSA in 2008 Storage of Cereals and Pulses 20 Pages Part 1: General Recommendations for the keeping of Cereals Gr 2 This standard gives general guidance related to the problems of keeping cereals. by colour-indicator titration. __________________________________________________________________________________________ GS ISO 6282 : 1983Ψ 21. __________________________________________________________________________________________ 206 . __________________________________________________________________________________________ GS ISO 6322-1 : 1996Ψ 67.Determination of Saponification Number 7 Pages Part 1: Colour-Indicator Titration Method Gr 1 This standard specifies a method for the determination.140. __________________________________________________________________________________________ GS ISO 6321 : 2002Ψ 67.10 Published by GSA in 2006 Plain Bearings . commonly known as the slip point.200.10 Published by GSA in 2006 Plain Bearings .Metallic Thin-walled Half Bearings .100.Determination of the Sigma 0.200.080 Published by GSA in 2006 Petroleum Products . of animal and vegetable fats and oils (referred to as fats hereinafter).Determination of Refractive Index 6 Pages Gr 1 This standard specifies a method for the determination of the refractive index of animal and vegetable fats and oils.Requirements on Backings for Thick-walled Multilayer Bearings 1 Page Gr 1 This standard serves as a guide to obtain the optimum bond between backing and bearing metal for thick-walled multilayer plain bearings.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .Determination of Melting Point in Open Capillary 11 Pages Tubes (Slip Point) Gr 2 This standard specifies two methods for the determination of the melting point in open capillary tubes.100. __________________________________________________________________________________________ GS ISO 6293-1 : 1996Ψ 75. __________________________________________________________________________________________ GS ISO 6303 : 1981Ψ 77. of the amount of constituents in petroleum products that will saponify under the conditions of the test.30 Published by GSA in 2006 Pressure Vessel Steels not Included in ISO 2604. Strips and Plates Part 1: Technical Condition for Inspection and Delivery 3 Pages Gr 1 This standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy sheets.150.080.Assessment of Static Electrical Propensity .10 Published by GSA in 2008 Wrought Aluminium and Aluminium Alloy Sheets.100. i.10 Published by GSA in 2008 Wrought Aluminium and Aluminium Alloy Sheets.Determination of Flowrate Characteristics 14 Pages Gr 2 This standard specifies a method for testing pneumatic fluid power components which use compressible fluids. __________________________________________________________________________________________ GS ISO 6361-4 : 1988Ψ 77.150. gases. It specifies requirements for material quality and heat treatment and comments on their influences on both limit stress numbers. __________________________________________________________________________________________ GS ISO 6361-1 : 1986Ψ 77.Tolerances on form and Dimensions 9 Pages Gr 1 This standard specifies the tolerantes on shape anddimensions for aluminium and aluminium alloy’sheet __________________________________________________________________________________________ 207 . to enable their flow-rate characteristics under steady-state conditions to be compared. __________________________________________________________________________________________ GS ISO 6358 : 1989Ψ 23.Components using Compressible Fluids .Strips and Plates Part 4: Sheets and Plates .e.Tolerances on Shape and Dimensions Gr 1 This standard specifies dimensional tolerantes for aluminium and aluminium alloy Strips for thicknesses up to and including 6.150. Strips and plates for general engineering applications __________________________________________________________________________________________ GS ISO 6361-2 : 1990Ψ 77.3 mm. Strips and plates for general engineering applications.150.Strips and Plates Part 2: Mechanical properties 14 Pages Gr 2 This standard specifies the mechanical properties of wrought aluminium and aluminium alloy sheets.200 Published by GSA in 2006 Calculation of Load Capacity of Spur and Helical Gears — Part 5: Strength and Quality of Materials 43 Pages Gr 5 This standard describes contact and tooth-root stresses.Walking Test 14 Pages Gr 2 This standard describes a method of evaluating the electrostatic propensity of all types of textile floor coverings under controlled conditions.Strips and Plates 3 Pages Part 3: Strips .60 Published by GSA in 2006 Textile Floor Coverings . __________________________________________________________________________________________ GS ISO 6356 : 2000Ψ 59.01 Published by GSA in 2006 Pneumatic Fluid Power .10 Published by GSA in 2008 Wrought Aluminium and Aluminium Alloy Sheets.10 Published by GSA in 2008 Wrought Aluminium and Aluminium Alloy Sheets. and gives numerical values for both limit stress numbers.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6336-5 : 2003Ψ 21. __________________________________________________________________________________________ GS ISO 6361-3 : 1985Ψ 77. 99.Test Methods 29 Pages Gr 3 This standard specifies methods for testing hydraulic valves which are used for the control of flow or pressure in a circuit in order to determine their steady-state and dynamic performance.Single Rod Cylinders 10 bar” (1 000 kPa) Series .100.20 Published by GSA in 2006 Copper Alloys . __________________________________________________________________________________________ GS ISO 6413 : 1988Ψ 01. __________________________________________________________________________________________ GS ISO 6432 : 1985Ψ 23. applicable to isometric representation.100.100. Isometric representation shall be used where the essential features are to be shown clearly in three dimensions.99.Determination of Chromium Content Titrimetric Method 3 Pages Gr 1 This standard specifies a titrimetric method for the determination of the total chromium content of opperchromium alloys listed in Standards.20 Published by GSA in 2006 Technical Drawings .01 Published by GSA in 2006 Technical Drawings .040.23.20 Published by GSA in 2006 Pneumatic Fluid Power .180 11 Pages Gr 2 This standard establishes the fundamental principles of ergonomics as basic guidelines for the design of work systems and defines relevant basic terms. __________________________________________________________________________________________ GS ISO 6403 : 1988Ψ 23. __________________________________________________________________________________________ 208 .100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6385 : 2004Ψ Published by GSA in 2004 Ergonomic Principles in the Design of Work Systems 13. __________________________________________________________________________________________ GS ISO 6412-2 : 1989Ψ 01.50 Published by GSA in 2006 Hydraulic Fluid Power .Simplified Representation of Pipelines 9 Pages Part 2 : Isometric Projection Gr 1 This standard specifies supplementary rules.040.Valves Controlling Flow and Pressure .Mounting 5 Pages Dimensions Gr 1 This standard establishes a metric series of mounting dimensions required for interchangeability of commonly used pneumatic cylinders for a maximum working pressure of 10 bar (1 000 kPa).23. __________________________________________________________________________________________ GS ISO 6412-1 : 1989Ψ 01.Bores from 8 to 25 mm .100.Simplified Representation of Pipelines 9 Pages Part 1 : General Rules and Orthogonal Representation Gr 1 This standard specifies rules and conventions for the execution of simplified drawings for the representation of all kinds of pipes and pipelines made of all sorts of materials (rigid and flexible).100. __________________________________________________________________________________________ GS ISO 6437 : 1984Ψ 23.01 Published by GSA in 2006 Technical Drawings .Representation of Spline and Serrations 5 Pages Gr 1 This standard specifies the rules and graphical symbols for the representations of splines and serrations on technical drawings. in addition to the general rules given in ISO 6412-1. 10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .Detection and Enumeration of the Spores of Sulfite-Reducing Anaerobes (Clostridia) Part 1: Method by Enrichment in a Liquid Medium Gr 1 3 Pages Specifies a method for the detection and enumeration of the spores of sulfite reducing (anaerobes clostridia) by enrichment in a liquid medium. D.T) PART 2 :VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A. K.100. E.6-di-tert-butyl-4-methylphenol) (BHT). It specifies a direct method for checking the main functions of the machine operation and an indirect method suitable for the overall checking of the machine.D.C.040.Dimensions and Tolerances 4 Pages Gr 1 This standard specifies a range of thrust washers for general purpose use with wrapped bushes as specified in this Standard. __________________________________________________________________________________________ GS ISO 6525 : 1983Ψ 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6461-1 : 1986Ψ 07.Features and Tolerances 6 Pages Gr 1 This standard specifies the main features and lays down tolerantes for pressed bimetallic half thrust washers having an outside diameter up to 160 mm.E.200.99 Published by GSA in 2006 Plain Bearings .060. the use of hard metal for ball indenters is considered to be the standard type of Rockwellindent ball.H. A. G.Rockwell Hardness Test .T ) Gr 3 25 Pages This standard specifies the method for Rockwell and Rockwell superficial hardness tests (scales and field of application according to table 1) for metallic materials.Ring Type Thrust Washers made from Strip . B.20 Published by GSA in 2008 Water Quality . E. used as antioxidants. B. F.10 Published by GSA in 2008 Metallic Materials .Thin-Walled Half-bearings .Part 1: Test Method( Scales.Gas-Liquid Chromatographic Method Gr 1 3 Pages This standard specifies a gas-liquid chromatographic method for the determination of butylhydroxyanisole (te/t-butyl-4-methoxyphenol) (BHA) and butylhydroxytoluene (2. G.040. H.Pressed Bimetallic Half Thrust Washers . H.F.A. F.99 Published by GSA in 2006 Plain Bearings .Rockwell Hardness Test .K. in animal and vegetable fats and oils. Attention is drawn to the fact that in this part of GS ISO 6508. C.Determination ofButylhydroxyanisole (BHA) and Butylhydroxytoluene (BHT) . __________________________________________________________________________________________ GS ISO 6524 : 1992Ψ Published by GSA in 2006 Plain Bearings .F.Checking of Peripheral Length 21.C. __________________________________________________________________________________________ GS ISO 6508-2 : 2005Ψ 77. H. G. C. N.10 Published by GSA in 2008 Metalic Materials .060. T) in accordance with GS ISO 6508-1. B. __________________________________________________________________________________________ GS ISO 6463 : 1982Ψ 67. K.10 29 Pages Gr 3 This standard specifies methods of checking the measuring equipment and gauging tools necessary for measuring the peripheral length (or nip or crush) of thin-walled half-bearings.N. __________________________________________________________________________________________ GS ISO 6508-1 : 2003Ψ 77. T) Gr 3 21 Pages This standard specifies a method of verification of testing machines for determining Rockwell hardness (scales A. D.G.D. __________________________________________________________________________________________ 209 . N .Part 2: Verification and Calibration of Testing Machines( Scales. N. E.B. __________________________________________________________________________________________ GS ISO 6526 : 1983Ψ 21.100. Vegetables and Derived Products .01 Published by GSA in 2006 Fruits. Sri Lankan Type.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6539 : 1997Ψ 67.01 1 Pages Gr 1 This standard specifies face-to-face dimensions for a range of automatic steam traps used in flanged pipe Systems.060. __________________________________________________________________________________________ GS ISO 6553 : 1980Ψ Published by GSA in 2006 Automatic Steam Traps .01 Published by GSA in 2006 Fruits.Dimensions and Tolerantes Gr 1 This standard establishes the dimensions and associated tolerantes for a series of housings for hydraulic cylinder Piston Seals that incorporate bearing rings. which is the bark of the tree or shrub Cinnamomum. temperature and flow rate are concerned. __________________________________________________________________________________________ GS ISO 6547 : 1981Ψ 23. vegetables and derived products __________________________________________________________________________________________ GS ISO 6557-2 : 1984Ψ 67.Cylinders . using molecular fluorescence spectrometry. vegetables and derived products __________________________________________________________________________________________ 210 . as well as their corresponding Symbols and units. for the determination of the combined ascorbic and dehydroascorbic acid content of fruits.080. __________________________________________________________________________________________ GS ISO 6557-1 : 1986Ψ 67. pressure.080.Face-to-face Dimensions 23.10 Published by GSA in 2005 Cinnamon.Piston Seal Housings 3 Pages Incorporating Bearing Rings .220.100. __________________________________________________________________________________________ GS ISO 6554 : 1980Ψ Published by GSA in 2006 Flanged Automatic Steam Traps .20 Published by GSA in 2006 Hydraulic Fluid Power .01 1 Pages Gr 1 This standard specifies mandatory and optional markings for automatic steam traps.040. __________________________________________________________________________________________ GS ISO 6552 : 1980Ψ Published by GSA in 2006 Automatic Steam Traps . zeylanicum Blume. Vegetables and Derived Products . Seychelles Type and Madagascan Type (Cinnamomum Zeylanicum Blume) .Determination of Ascorbic Acid 3 Pages Part 1: Reference Method Gr 1 This standard specifies the reference method.Specification 7 Pages Gr 1 Specifies requirements for whole or ground ( powdered) cinnamon of the Sri Lankan type .Definition of Technical Terms 01.060.Marking 23. Madagascan type and Seychelles type.Determination of Ascorbic Acid Content Part 2: Routine Methods 4 Pages Gr 1 This standard specifies two routine methods for the determination of the ascorbic acid content of fruits.23 3 Pages Gr 1 This standard gives the definitions of the major technical terms and expressions used to describe an automatic steam trap as far as dimension. Determination of Benzoic Acid Content (Benzoic Acid 3 Pages contents greater than 200 mg per litter or per kilogram) .080.Horizontal Method for the Detection 27 Pages of Salmonella spp Gr 3 This standard specifies a horizontal method for the detection of Salmonella.Molecular Absorption Spectrophotometric Method Gr 1 This standard specifies a method for the determination of the benzloic acid content of fruit and vegetable products.01 Published by GSA in 2006 Fruits. condiments and herbs.Determination of Cadmium Content 6 Pages Part 2: Method using Flame Atomic Absorption Spectrometry Gr 1 This standard specifies an atomic absorption spectrometric method for the determination of the cadmium content of fruits.) 8 Pages Specification Gr 1 This standard specifies requirements for nutmeg. __________________________________________________________________________________________ GS ISO 6561-1 : 2005Ψ 67.Determination of Cadmium Content 5 Pages Part 1: Method using Graphite Furnance Atomic Absorption Spectrometry Gr 1 This standard specifies a graphite furnace atomic absorption spectrometic method for the determination of the cadmium content of fruits.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6558-2 : 1992Ψ 67.Routine Methods 4 Pages Gr 1 This standard specifies two routine methods for the determination of the carotene content present in the edible parts of. Mace.Determination of Carotene Content Part 2 . __________________________________________________________________________________________ GS ISO 6577 : 2002Ψ 67. or added to. and for mace. whole or broken.10 4 Pages Gr 1 This standard specifies a method for the determination of the volatile oil content of spices.220.080.080.01 Published by GSA in 2006 Fruit and Vegetable Products . Condiments and Herbs . fruits. Whole or Broken.080. __________________________________________________________________________________________ GS ISO 6579 : 2002Ψ 07. commercial purposes.) for wholesale. or in pieces.Determination of Volatile Oil Content 67. Vegetables and Derived Products .30 Published by GSA in 2006 Microbiology of Food and Animal Feeding Stuffs . including Salmonella Typhi and Salmonella Paratyphi __________________________________________________________________________________________ 211 .01 Published by GSA in 2006 Fruits.01 Published by GSA in 2006 Fruits. Vegetables and Derived Products . vegetables and derived products __________________________________________________________________________________________ GS ISO 6571 : 1984Ψ Published by GSA in 2006 Spices. vegetables and derived products __________________________________________________________________________________________ GS ISO 6561-2 : 2005Ψ 67.10 Published by GSA in 2005 Nutmeg. Whole or in Pieces (Myristica Fragrans Houtt. Vegetables and Derived Products . obtained from the nutmeg tree (Myristica fragrans Houtt.220. vegetables and derived products __________________________________________________________________________________________ GS ISO 6560 : 1983Ψ 67. 120 4 Pages Gr 1 This standard specifies the dimensions of circular flanges of general-purpose industrial fans.060.060.040 Published by GSA in 2006 Paper.060.10 Published by GSA in 2006 Internal Combustion Engines .Conradson Method 10 Pages Gr 1 This standard specifies a method for determining the amount of carbon residue.Hot Extraction 6 Pages Gr 1 This standard specifies a method for the determination of the pH-value defined by the electrolytes extractable by hot water from a sample of paper. __________________________________________________________________________________________ GS ISO 6621-2 : 2003Ψ 43. 85. based on their mechanical properties and the stresses the materials are capable of withstanding. left after evaporation and pyrolysis of an oil.060. Board and Pulps .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6580 : 2005Ψ Published by GSA in 2006 General-purpose Industrial Fans Circular Flanges Dimensions 23.Determination of pH of Aqueous Extracts Part 2 .Piston Rings 15 Pages Part 4: Quality Requirements Gr 2 This standard specifies those quality aspects that are capable of definition but not normally found on a drawing specification.Piston Rings 28 Pages Part 3: General Specifications Gr 3 This standard specifies the general characteristics of piston rings for both reciprocating internal combustion engines and compressors.080 Published by GSA in 2006 Petroleum Products . in the range of 0. and is intended to provide some indication of relative coke-forming tendency. __________________________________________________________________________________________ GS ISO 6588-2 : 2005Ψ 85. It also provides a system for ring coding.060. board or pulp __________________________________________________________________________________________ GS ISO 6615 : 1993Ψ 75. __________________________________________________________________________________________ GS ISO 6621-5 : 2005Ψ 43. __________________________________________________________________________________________ GS ISO 6621-3 : 2000Ψ 43.Piston Rings Part 3: Material Specifications 3 Pages Gr 1 This standard classifies materials intended for the manufacture of piston rings. It is applicable to all such rings of a diameter u 200 mm.0% (m/m).Determination of Carbon Residue .01% (m/m) to 30.10 Published by GSA in 2006 Internal Combustion Engines . __________________________________________________________________________________________ 212 .10 Published by GSA in 2006 Internal Combustion Engines . __________________________________________________________________________________________ GS ISO 6621-4 : 2003Ψ 43.10 Published by GSA in 2006 Internal Combustion Engines . designation and marking.Piston Rings 29 Pages Part 2: Inspection Measuring Principles Gr 3 This standard specifies the principles to be used in the measuring for inspection purposes of piston rings for both reciprocating internal combustion engines and compressors working under analogous conditions. 01 Published by GSA in 2006 Fruits.Silver 5 Pages Diethyldithiocarbamate Spectrophotometric Method Gr 1 This standard specifies a method for the determination of the arsenic content of fruits. Vegetables and Derived Products . vegetables and derived products. vegetables and derived products __________________________________________________________________________________________ GS ISO 6636-1 : 1986Ψ 67. __________________________________________________________________________________________ 213 . vegetables and derived products __________________________________________________________________________________________ GS ISO 6633 : 1984Ψ 67.01 Published by GSA in 2006 Fruits.080.01 Published by GSA in 2006 Fruits.Determination of Volatile Acidity 67.080. vegetables and derived products __________________________________________________________________________________________ GS ISO 6634 : 1982Ψ 67. __________________________________________________________________________________________ GS ISO 6636-2 : 1981Ψ 67. vegetables and derived products. __________________________________________________________________________________________ GS ISO 6636-3 : 1983Ψ 67.Determination of Arsenic Content .Atomic Absorption Spectrometric Method Gr 1 This standard specifies an atomic absorption spectrometric method for the determination of the zinc content of fruits.080. vegetables and derived products.01 Published by GSA in 2006 Fruits. Vegetables and Derived Products . Vegetables and Derived Products .080.Determination of Zinc Content Part 3: Dithizone Spectrometric Method 3 Pages Gr 1 This standard specifies a dithizone spectrometric method for the determination of the zinc content of fruit and vegetable products.Flameless 3 Pages Atomic Absorption Spectrometric Method Gr 1 This standard specifies a flameless atomic absorption spectrometric method for the determination of the lead content of frits. Vegetables and Derived Products .01 9 Pages Gr 1 This standard specifies a method for the determination of volatile acidity in fruits. __________________________________________________________________________________________ GS ISO 6635 : 1984Ψ 67.Determination of Lead Content .Determination of Zinc Content 4 Pages Part 2 .01 Published by GSA in 2006 Fruits.Determination of Nitrite and Nitrate Content 4 Pages .080.Determination of Zinc Content Part 1: Polarographic Method 3 Pages Gr 1 This standard specifies a polarographic method for the determination of the zinc content of fruits.080. Vegetables and Derived Products .080.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6632 : 1981Ψ Published by GSA in 2006 Fruits.01 Published by GSA in 2006 Fruit and Vegetable Products .Molecular Absorption Spectrometric Method Gr 1 This standard specifies a method for the determination of the nitrite and nitrate content of fruits. Vegetables and Derived Products . of every insect species that normally feeds and develops within cereals and pulses.080. vegetables and derived products. or detecting the presence of. of cereals or of milled cereal products moving in bulk.01 Published by GSA in 2006 Fruits.060 Published by GSA in 2008 Cereals and Pulses .The characteristics leading to the choice of rapid method are __________________________________________________________________________________________ GS ISO 6644 : 2002Ψ 67. for the determination of hidden insect infestation __________________________________________________________________________________________ GS ISO 6639-3 : 1986Ψ 67. Its aim is to count all the individuals. __________________________________________________________________________________________ 214 .060 Published by GSA in 2008 Cereals and Pulses .060 Published by GSA in 2008 Cereals and Pulses .Determination of Hidden Insect Infestation 17 Pages Part 4: Rapid Methods Gr 2 This standard specifies five rapid methods for estimating the degree of. __________________________________________________________________________________________ GS ISO 6639-4 : 1987Ψ 67.Automatic Sampling by Mechanical Means 9 Pages Gr 1 This standard specifies requirements for the automatic sampling by mechanical means. at every stage of life.Determination of Formic Acid Content 3 Pages Part 2: Titrimetric Method Gr 1 This standard specifies a titrimetric method for the determination of the formic acid content of fruit and vegetable products.060 Published by GSA in 2008 Cereals and Pulses . in bags or in bulk. hidden Insect infestation in a sample of a cereal or pulse. in bags or in bulk.01 Published by GSA in 2006 Fruit and Vegetable Products . __________________________________________________________________________________________ GS ISO 6639-1 : 1986Ψ 67.Determination of Hidden Insect Infestation 2 Pages Part 1: General Principles Gr 1 This standard establishes the general principles of methods of determining hidden insect infestation in cereals and pulses methods of determining hidden insect infestation in cereals an __________________________________________________________________________________________ GS ISO 6639-2 : 1986Ψ 67.Determination of Hidden Insect Infestation 4 Pages Part 3: Reference Method Gr 1 This standard specifies the reference method for determining the nature and number of hidden insects in a sample of cereals or pulses.080. for the determination of hidden and pulses.Determination of Hidden Insect Infestation 4 Pages Part 2: Sampling Gr 1 This standard specifies methods of sampling cereals and pulses.060 Published by GSA in 2008 Flowing Cereals and Milled Cereal Products .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6637 : 1984Ψ 67. __________________________________________________________________________________________ GS ISO 6638-2 : 1984Ψ 67.Determination of Mercury Content Flameless Atomic Absorption Method 5 Pages Gr 1 This standard specifies a method for the determination of the mercury content of fruits. for assessment of their quality. Vegetables and Derived Products . NOTE . 140.Damaged Beans 67. __________________________________________________________________________________________ 215 .140.100.Determination of Iron Content .100.Determination of Total Solids Content (Reference 9 Pages Method) Gr 1 This standard specifies the reference method for the determination of the total solids content of milk. shipped in ten units or more.10. __________________________________________________________________________________________ GS ISO 6734 : 1989Ψ 67. __________________________________________________________________________________________ GS ISO 6704 : 1982Ψ Published by GSA in 2006 Automatic Steam Traps . commercial and arbitration purposes.10 Published by GSA in 2005 Milk. __________________________________________________________________________________________ GS ISO 6691 : 2000Ψ 21.01 Published by GSA in 2005 Milk and Milk Products .10 Published by GSA in 2005 Sweetened Condensed Milk . Cream and Evaporated Milk . __________________________________________________________________________________________ GS ISO 6731 : 1989Ψ 67.20 Published by GSA in 2006 Thermoplastic Polymers for Plain Bearings — Classification and Designation 24 Pages Gr 3 This standard specifies a classification and designation system for a selection of the most common unfilled thermoplastic polymers for plain bearings. 83.20 12 Pages Gr 2 This standard describes the type of damage caused by insects to green coffee beans and specifies a method for the determination of the proportion of insect. cream and evaporated milk. __________________________________________________________________________________________ GS ISO 6732 : 1985Ψ 67.Determination of Total Solids Content (Reference Method) 9 Pages Gr 1 This standard specifies the reference method for the determination of the total solids content of sweetened condensed milk. __________________________________________________________________________________________ GS ISO 6670 : 2002Ψ Published by GSA in 2007 Instant Coffee .damaged beans in a lot of green coffee together with the statistical use of the result obtained for technical.01 4 Pages Gr 1 The purpose of this standard is to establish a simple classification of the main types of automatic steam traps according to the mode of actuation of their obturation device and disregarding their details of conception and construction.100.Classification 23.Spectrometric Method 9 Pages (Reference Method) Gr 1 This standard specifies a spectrometric reference method for the determination of the iron content of milk and milk products.100. for the purpose of examination to determine whether the consignment complies with a contract specification.20 6 Pages Gr 1 This standard specifies a method of sampling a consignment of instant coffee.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6667 : 1985Ψ Published by GSA in 2007 Green Coffee.Determination of Proportion of Insect.060.Sampling Method for Bulk Units with Liners 67.080. 10 Published by GSA in 2007 Instant Tea .Determination of the Composition of Fatty Acids in 12 Pages the 2-position of the Triglyceride Molecules Gr 2 This standard specifies a method for the determination of the composition of fatty acids which are esterified in the 2-position (ß or internal position) of the triglyceride molecules in animal and vegetable fats and oils.040.70 Published by GSA in 2006 Rubber and Plastics Hoses and Hose Assemblies with Wire Reinforcements — Hydraulic Impulse Test with Flexing 4 Pages Gr 1 This standard describes a pressure impulse test with flexing for wire-reinforced rubber and plastics hydraulic hoses and hose assemblies. It does not specify the dimensions of the test piece and the test pressures) as each of which will be specified in the appropriate specification.Determination of volumetric 3 Pages expansion Gr 1 This standard specifies a method for the determination of the volumetric expansion of rubber or plastics hoses under hydrostatic pressure. without flexing.10 4 Pages Gr 1 Specifies the requirements for dried thyme (Thymus vulgaris l ) leaves in the rubbed form. of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures.040. __________________________________________________________________________________________ GS ISO 6802 : 2005Ψ 23.) Specification 67.Flow and Compacted Bulk Densities 6 Pages Gr 1 The standard specifies two methods for the determination of the bulk density of instant tea :free-flow bulk density and compacted bulk density __________________________________________________________________________________________ GS ISO 6800 : 1997Ψ 67. __________________________________________________________________________________________ GS ISO 6761 : 1981Ψ 23. __________________________________________________________________________________________ GS ISO 6803 : 2008Ψ 23.040.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6754 : 1996Ψ Published by GSA in 2005 Dried Thyme (Thymus Vulgaris L.70 Published by GSA in 2010 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without 5 Pages flexing Gr 1 This International Standard describes hose impulse testing.5MPa to 3MPa.Determination of Free .Preparation of Ends of Tubes and Fittings 1 Page for Welding Gr 1 This standard specifies the most usual preparation of ends of tubes and of ends of fittings for welding.220. __________________________________________________________________________________________ 216 .70 Published by GSA in 2006 Rubber or plastics hoses .040. The high-pressure testing is carried out at pressures greater than 3MPaand the low-pressure testing at pressures from 1. __________________________________________________________________________________________ GS ISO 6770 : 1982Ψ 67.200.140.10 Published by GSA in 2006 Steel Tubes . __________________________________________________________________________________________ GS ISO 6801 : 1983Ψ 23.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . The test procedure is applicable to hydraulic hoseassemblies that are subject to pulsating pressures in service which are included in the product requirements. 160.10 2 Pages Gr 1 This standard specifies a method for the determination of ash. This Standard applies to deposition of a weld metal pad by use of covered electrodes.160.Determination of Ash 67.200.General Rules for the Preparation of the Initial Suspension and Decimal Dilutions Gr 1 This standard defines general rules for the aerobic preparation of the initial suspension and of decimal dilutions for microbiological examinations of products intended for human or animal consumption __________________________________________________________________________________________ GS ISO 6887-2 : 2003Ψ 07. __________________________________________________________________________________________ GS ISO 6848 : 2004Ψ 25. angles and rod ends.100. cutting and thermal spraying.040. wire electrodes for gas shielded metal arc welding.Preparation of Test Samples.100. Initial 5 Pages Suspension and Decimal Dilutions for Microbiological Examination Part 1 . __________________________________________________________________________________________ .30 Published by GSA in 2006 Microbiology of Food and Animal Feeding Stuffs .Determination of Oixdative Stability (Acelerated Oxidation Test) Gr 2 13 Pages This standard specifies a method for the determination of the oxidative stability of fats and oils under extreme conditions that induce rapid oxidation. Initial Suspension and Decimal Dilutions for Microbiological Examination 15 Pages Part 2: Specific Rules for the Preparation of Meat and Meat Products Gr 2 This specifies rules for the preparation of meat and meat product samples and their suspension for microbiological examination when the samples require a different preparation from the method described in GS ISO 6887-1.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .20 Published by GSA in 2006 Arc Welding and Cutting — Nonconsumable Tungsten Electrodes — Classification 8 Pages Gr 1 This standard specifies requirements for classification of non-consumable tungsten electrodes for inert gas shielded arc welding. __________________________________________________________________________________________ GS ISO 6884 : 1985Ψ Published by GSA in 2006 Animal and Vegetable Fats and Oils . __________________________________________________________________________________________ GS ISO 6887-1 : 1999Ψ 07. __________________________________________________________________________________________ GS ISO 6886 : 2006Ψ 67. 21. tubular cored electrodes for gas shielded arc metal welding and for analysis. and for plasma welding. applicable to all animal and vegetable fats and oils. 217 . bearing parts and features.20 Published by GSA in 2006 Welding Consumables — Deposition of a Weld Metal Pad for Chemical Analysis 4 Pages Gr 1 This standard specifies the procedure to be used for deposition of a weld metal pad for chemical analysis. movements.30 Published by GSA in 2006 Microbiology of Food and Animal Feeding Stuffs . __________________________________________________________________________________________ GS ISO 6847 : 2000Ψ 25.21.10 42 Pages Gr 5 This standard presents general terms and definitions relevant to the field of spherical plain bearings. including acid oils.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6811 : 1998Ψ Published by GSA in 2006 Spherical Plain Bearings — Vocabulary 01.200. It deals with bearings.Preparation of Test Samples.100. 120. Meat and Meat Products.Horizontal Method for the Enumeration of Coagulase .Positive Staphylococci (Staphylococcus Aureus and other Species) Part 1 : Technique using Baird Parker Agar Medium 11 Pages Gr 2 Specifies a horizontal method for the enumeration of coagulase-positive staphylococci in products intended for human consumption or feeding of animals.Testing of the Accuracy 3 Pages Gr 1 This standard specifies. and Fish and Fishery Products Gr 2 This standard specifies rules for the preparation of samples and decimal dilutions for the microbiological examination of food products other than those covered in other parts of GS ISO 6887.30 Published by GSA in 2005 Microbiology of Food and Animal Feeding Stuffs . Initial 13 Pages Suspension and Decimal Dilutions for Microbiological Examination Part 4: Specific Rules for the Preparation of Products other than Milk and Milk Products.100.Preparation of Test Samples.10 43 Pages Gr 5 This standard specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at ambient temperature.100.Capacity Ratings and Dimensions 25. with reference to ISO/R 230.30 GS ISO 6887-3 : 2003Ψ Published by GSA in 2006 Microbiology of Food and Animal Feeding Stuffs. in the range from 100 to 2 500 kN inclusive. __________________________________________________________________________________________ GS ISO 6898 : 1984Ψ Published by GSA in 2006 Open Front Mechanical Power Presses .Tensile Testing at Ambient Temperature 77. by counting of colonies obtained on a solid medium (Baird-Parker medium) after aerobic incubation at 35 °C or 37 °C. geometrical tests for open front mechanical power presses and gives the corresponding permissible tolerances.30 Published by GSA in 2006 Microbiology of Food and Animal Feeding Stuffs . __________________________________________________________________________________________ GS ISO 6899 : 1984Ψ 25.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 07.040. __________________________________________________________________________________________ 218 . __________________________________________________________________________________________ GS ISO 6888-1 : 1999Ψ 07.120.Preparation of Test Samples.10 8 Pages Gr 1 This standard specifies capacity ratings and dimensions for open front mechanical presses with or without a passage through the frame and with or without a slope.100.10 Published by GSA in 2006 Acceptance Conditions of Open Front Mechanical Power Presses . Initial Suspension and Decimal Dilutions for Microbiological Examination 11 Pages Part 3: Specific Rules for the Preparation of Fish and Fishery Products Gr 2 This standard specifies rules for the preparation of fish and fishery product samples and their suspension for microbiological examination when the samples require a different preparation from the method described in ISO 6887 __________________________________________________________________________________________ GS ISO 6887-4 : 2003Ψ 07. __________________________________________________________________________________________ GS ISO 6892 : 1998Ψ Published by GSA in 2007 Metallic Materials . 25 9 Pages Gr 1 It applies to the grades of wrought stainless steels which are currently generally used in the work.140.Part 1: Wire 77.Working positions .15.Part 1 : Plain Bars 77.40 5 Pages Gr 1 This standard specifies technical requirements for plain bars designed for reinforcement in ordinary concrete structure and for non.40 11 Pages Gr 2 This standard specifies technical requirements for ribbed bars designed for reinforcement in ordinary concrete structures and for non-prestressed reinforcement in prestressed concrete structure.25 28 Pages Gr 3 This applies to cold-rolled narrow strip of thicknesses up to and including 3 mm.40 8 Pages Gr 1 This standard defines working positions and makes it possible to locate welds in space with reference to the horizontal reference plane (usually parallel to the Workshop floor) by means of angles of slope and rotation which are independent from surrounding construction.160.20 Published by GSA in 2006 Textiles .140.01 Published by GSA in 2006 Fruits and Vegetables .hardened condition in the form of wire up to about 6mm in diameter __________________________________________________________________________________________ GS ISO 6931-2 : 2005Ψ Published by GSA in 2006 Stainless Steels for Springs — Part 2: Narrow Strip 77. made from the stainless steel grades.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6931-1 : 1994 Published by GSA in 2006 Stainless Steel for Springs . 91.080.Part 2 : Ribbed Bars 77. __________________________________________________________________________________________ GS ISO 6935-2 : 2007Ψ Published by GSA in 2007 Steel for Reinforcement of Concrete . __________________________________________________________________________________________ GS ISO 6949 : 1988Ψ 67. __________________________________________________________________________________________ GS ISO 6935-1 : 2007Ψ Published by GSA in 2007 Steel for Reinforcement of Concrete . in rolled widths less than 600 mm.Method of Test for Breaking Strength of Yarn by the 4 Pages Skein Method Gr 1 This standard specifies a method for the determination of the breaking strength of yarn by the skein method.Definitions of angles of slope and rotation 25.15.080.140.080.140.prestressed reinforcement in prestressed concrete structures.Yarns from Packages . 91.080. __________________________________________________________________________________________ GS ISO 6947 : 1990Ψ Published by GSA in 2006 Welds .Principles and Techniques of the Controlled Atmosphere Method of Storage 6 Pages Gr 1 This standard specifies the principles and techniques of controlled atmosphere storage for fruits and vegetables __________________________________________________________________________________________ 219 . __________________________________________________________________________________________ GS ISO 6939 : 1988Ψ 59. 040. malleable and ductile cast iron flanges.Part 3: Copper Alloy and Composite Flanges 26 Pages Gr 3 This standard 7005 for a Single System of flanges specifies requirements for circular topper alloy and composite flanges.100.220.100. __________________________________________________________________________________________ GS ISO 6954 : 2000Ψ 17.Two-Pin Electrical Plug Connectors with Earth Contact .60 Published by GSA in 2006 Metallic Flanges .Characteristics and Requirements 5 Pages Gr. test procedures and a method of presenting the results concerning the parameters which define the main characteristics to be included in literature from suppliers of regulators and filter regulators conforming to ISO 6953-1. Reporting and Evaluation of Vibration with Regard to Habitability on Passenger and Merchant Ships 8 Pages Gr 1 This standard contains guidelines for the evaluation of vibration with regard to habitability on a passenger or merchant ship. as well as requirements for the instrumentation and the method of measurement in normally occupied spaces.Part 2: Cast Iron Flanges 23.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 6952 : 1994Ψ 23. __________________________________________________________________________________________ GS ISO 7005-3 : 1988Ψ 23.20 Published by GSA in 2006 Metallic and other Non-Organic Coatings . __________________________________________________________________________________________ 220 .1 This standard specifies the following characteristics and requirements for a general purpose two-pin electrical plug connector with earth contact for use with a single solenoid __________________________________________________________________________________________ GS ISO 6953-1 : 2000Ψ 23. __________________________________________________________________________________________ GS ISO 6988 : 1985Ψ 25.Sulfur DioxideTest with General Condensation of Moisture Gr 1 4 Pages This standard specifies a method for assessing the resistance of materials or products to condensed moisture containing Sulfur dioxide. __________________________________________________________________________________________ GS ISO 6953-2 : 2000Ψ 23.160.50 Published by GSA in 2006 Pneumatic Fluid Power — Compressed Air Pressure Regulators and Filter-Regulators Part 2: Test Methods to Determine the main Characteristics to be included in Literature from Suppliers Gr 1 8 Pages This standard specifies tests. __________________________________________________________________________________________ GS ISO 7005-2 : 1988Ψ Published by GSA in 2006 Metallic Flanges .30 Published by GSA in 2006 Fluid Power Systems and Components . It also applies to filter-regulators. 47.50 Published by GSA in 2006 Pneumatic Fluid Power — Compressed Air Pressure Regulators and Filter-Regulators 8 Pages — Part 1: Main Characteristics to be included in Literature from Suppliers and ProductMarking Requirements Gr 1 This specifies the characteristics of compressed air pressure regulators to be included in literature from their suppliers.020 Published by GSA in 2006 Mechanical Vibration — Guidelines for the Measurement.60 34 Pages Gr 4 This standard for a single system of flanges specifies requirements for circular grey.040. 8 and 10 Gr 1 This standard specifies the characteristics of prevailing torque type hexagon nuts (with non-metallic insert). and with type H or type Z Cross recess. in product grade A for threads up to and including M16 and product grade B for threads above M16. Syle 2 — Property 4 Pages classes 9 and 12 Gr 1 This standard specifies the characteristics of prevailing torque type hexagon nuts (with non-metallic insert).060. with threads from M3 up to and including M36.Determination of Turbidity 13. __________________________________________________________________________________________ GS ISO 7045 : 1994Ψ Published by GSA in 2006 Pan Head Screws with Type H or Type Z Cross Recess . and with property classes 9 and 12. in product grade A for threads up to and including M16 and product grade B for threads above M16. in product grade A for threads up to and including M16 and product grade B for threads above M16. with threads from M1.60 10 Pages Gr 1 This standard specifies four methods for the determination of turbidity of water.20 Published by GSA in 2006 Prevailing Torque Type Hexagon Nuts with Flange (with non-metallic insert) — Product 6 Pages Grades A and B Gr 1 This standard specifies the characteristics of prevailing torque type hexagon nuts with flange (with non-metallic insert) with threads from M5 to M20 inclusive. employed for example in field work. 8 and 10.060.20 Published by GSA in 2006 Prevailing Torque Type All-Metal Hexagon Nuts. style 2.20 4 Pages Gr 1 This standard specifies the characteristics of pan head screws of product grade A. 10 and 12. style 2. __________________________________________________________________________________________ GS ISO 7040 : 1997Ψ 21. and with property classes 5.6 to MIO inclusive.20 Published by GSA in 2006 Prevailing Torque Type Hexagon Nuts (with non-metallic insert). 9 and 10. __________________________________________________________________________________________ GS ISO 7042 : 1997Ψ 21.080 2 Pages Gr 1 This standard specifies a method of obtaining a representative sample of empty sacks for testing.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7023 : 1983Ψ Published by GSA in 2006 Packaging .060. and with property classes 5. Two semi quantitative methods. 8. 8.Method of Sampling Empty Sacks for Testing 55.Product Grade A 21.060. and with property classes 8. Style 2 — Property Classes 5. style 1. Style 1 — Property 4 Pages classes 5. with threads from M5 up to and including M36. __________________________________________________________________________________________ GS ISO 7027 : 1999Ψ Published by GSA in 2008 Water Quality . 10 and 12 4 Pages Gr 1 This standard specifies the characteristics of prevailing torque type all-metal hexagon nuts.060. two quantitative methods.20 Published by GSA in 2006 Prevailing Torque Type Hexagon Nuts (with non-metallic insert). __________________________________________________________________________________________ GS ISO 7043 : 1997Ψ 21. __________________________________________________________________________________________ 221 .060. in product grade A for threads up to and including M16 and product grade B for threads above M16.Sacks . __________________________________________________________________________________________ GS ISO 7041 : 2002Ψ 21. using optical turbidimeters. with threads from M5 up to and including M36. of grade A and of property class 8.5 inclusive. Chamfered — Normal Series — Product Grade A 21. product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1.Grade A 4 Pages Part 2 : Steel of Property Class 8.30 5 Pages Gr 1 This standard specifies the characteristics of normal-series. Stainless Steel and Non .30 5 Pages Gr 1 This standard specifies the characteristics of normal-series.10 Published by GSA in 2006 Cross Recessed Countersunk (Flat) Head Tapping Screws (Common Head Style 4 Pages Gr 1 This standard specifies the characteristics of cross recessed countersunk (flat) head tapping screws with thread sizes from ST 2.060. __________________________________________________________________________________________ GS ISO 7083 : 1983Ψ 01. __________________________________________________________________________________________ GS ISO 7049 : 1983Ψ Published by GSA in 2006 Cross Recessed Pan Head Tapping Screws 21.6 mm to 64 mm inclusive __________________________________________________________________________________________ GS ISO 7090 : 2000Ψ Published by GSA in 2006 Plain Washers.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7046-2 : 1990Ψ 21. A2-70 for stainless steel and CU2 and CU3 for non-ferrous metals.20 Published by GSA in 2006 Technical Drawings .10 4 Pages Gr 1 This standard specifies the characteristics of Cross recessed pan head tapping screws with thread sizes from ST 2. in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 5 mm to 64 mm inclusive.060.060.Proportions and Dimensions 9 Pages Gr 1 This standard specifies the recommended proportions and lays down the dimensions for the symbols used to indicate geometrical tolerancing on technical drawings. __________________________________________________________________________________________ GS ISO 7091 : 2000Ψ 21.8. product-grade-A plain washers chamfered at the outside diameter.30 Published by GSA in 2006 Plain Washers — Normal Series — Product Grade C 4 Pages Gr 1 This standard specifies the characteristics of normal-series.2 to ST 9.5 inclusive __________________________________________________________________________________________ GS ISO 7050 : 1983Ψ 21.10 Published by GSA in 2006 Cross Recessed Countersunk Flat Head Screws (Common Head Style) .060. __________________________________________________________________________________________ 222 .100. product-grade-C plain washers in the 100 HV hardness class and of nominal sizes (nominal thread diameters) ranging from 1.060.Symbols for Geometrical Tolerancing .060.2 to ST 9.6 mm to 64 mm inclusive.ferrous Metals Gr 1 This standard specifies the characteristics of recessed countersunk flat head screws with threads M2 up to and including MlO. __________________________________________________________________________________________ GS ISO 7089 : 2000Ψ Published by GSA in 2006 Plain Washers — Normal Series — Product Grade A 21.8 for steel. product-grade-C plain washers in the 100 HV hardness class. of nominal sizes (nominal thread diameters) ranging from 5 mm to 36 mm . __________________________________________________________________________________________ GS ISO 7094 : 2000Ψ Published by GSA in 2006 Plain Washers — Extra Large Series — Product Grade C 21.Bore and Rod Area Ratios 23.060. of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm inclusive.6 mm to 36 mm inclusive __________________________________________________________________________________________ GS ISO 7093-1 : 2000Ψ Published by GSA in 2006 Plain Washers — Large Series — Product Grade A 21.30 5 Pages Gr 1 This standard specifies the characteristics of large-series.060. A4M = Piston rod diameter) of hydraulic cylinders a corresponding Standard ratio Q) between the useful areas ~4.30 3 Pages Gr 1 This standard specifies the characteristics of extra-large-series.Product Grade C 21.060. __________________________________________________________________________________________ GS ISO 7121 : 2006Ψ 23.30 5 Pages Gr 1 This standard specifies the characteristics of small-series.100.30 4 Pages Gr 1 This standard specifies the characteristics of large-series.20 3 Pages Gr 1 This standard specifies for each pair of diameters (AI.100. and A 2. = cylinder bore.20 Published by GSA in 2010 Steel ball valves for general-purpose industrial applications 23 Pages Gr 3 This standard specifies the requirements for a series of steel ball valves suitable for general purpose industrial applications.10 Published by GSA in 2006 Plain Bearings — Testing of the Tribological Behaviour of Bearing Materials — 9 Pages Part 1: Testing of Bearing Metals Gr 1 This standard specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication __________________________________________________________________________________________ GS ISO 7181 : 1991Ψ Published by GSA in 2006 Hydraulic Fluid Power .060. product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm __________________________________________________________________________________________ GS ISO 7093-2 : 2000Ψ Published by GSA in 2006 Plain Washers — Large Series .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7092 : 2000Ψ Published by GSA in 2006 Plain Washers — Small Series — Product Grade A 21. __________________________________________________________________________________________ GS ISO 7148-1 : 1999Ψ 21. __________________________________________________________________________________________ 223 . product-grade-C plain washers in the 100 HV hardness class.Cylinders . product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1.060. Determination of Resistance to Vacuum 5 Pages Gr 1 This standard specifies three methods for determining the resistance to vacuum of hoses and hose assemblies manufactured from plastic or rubber __________________________________________________________________________________________ GS ISO 7238 : 2004Ψ Published by GSA in 2005 Butter . Any of the three methods may be used. __________________________________________________________________________________________ 224 .100.100 Published by GSA in 2006 Microbiology of Food and Animal Feeding Stuffs . __________________________________________________________________________________________ GS ISO 7208 : 1999Ψ 67.100.100. __________________________________________________________________________________________ GS ISO 7233 : 2006Ψ 23. It is a particularly accurate gravimetric method especially for the purpose of establishingthe operating efficiency of cream separators. __________________________________________________________________________________________ GS ISO 7218 : 2007Ψ 07.Construction.General Rules for Microbiological Examinations 43 Pages Gr 5 This standard gives general instructions for carrying out microbiological examinations in accordance with specific standards.01 Published by GSA in 2003 Skimmed Milk.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7200 : 2004Ψ 01. Its purpose is to facilitate the exchange of documents and ensure compatibility by defining field names.40 Published by GSA in 2006 Hydraulic Fluid Power .Quick-action Couplings 5 Pages Part 1 : Dimensions and Requirements Gr 1 This standard lays down the interface dimensions and specifies basic Performance requirements for two series of general-purpose hydraulic quick-action couplings.Determination of Fat Content . the choice depending on the character of the fabric.080. whey and buttermilk. in case of dispute method A is recommended. However.Gravimination 14 Pages Method ( Reference Method) Gr 2 This standard specifies the reference method for the determination of the fat content of liquid skimmed milk.Determination of pH of the Serum .70 Published by GSA in 2006 Rubber and Plastics Hoses and Hose Assemblies .Methods of Analysis 6 Pages Part 2: Determinations of Threads per Unit Length Gr 1 Specifies three methods for the determination of the number of threads per centimeter in woven fabrics.20 5 Pages Gr 1 This standard specifies a potentiometric method for the determination of the pH of the serum from all types of butter. __________________________________________________________________________________________ GS ISO 7211-2 : 1984Ψ 59. Whey and Butter Milk. __________________________________________________________________________________________ GS ISO 7241-1 : 1987Ψ 23.040. their contents and their length (number of characters).Potentiometric Method 67.Woven Fabrics.30 Published by GSA in 2005 Textiles .110 Published by GSA in 2006 Technical Product Documentation — Data Fields in Title Blocks and Document Headers 6 Pages Gr 1 This standard specifies the data fields used in the title blocks and headers of technical product documents. 30 10 Pages Gr 1 This standard specifies requirements for two types of predominantly key-operated cast iron gate valves for underground use with flanges or spigot ends or socket ends.Definition of Nominal Pressure 1 Page Gr 1 This standard gives the definition of nominal pressure when applied to components of a metallic piping system.Metric Series .060. and states two series of PN ratings for use with these same components.Determination of the Flat Crush Resistance after Laboratory 6 Pages Fluting Gr 1 It specifies two methods for the determination of the flat crush resistance of corrugating medium after laboratory fluting __________________________________________________________________________________________ GS ISO 7268 : 1983Ψ 23. then at 44 °C.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7241-2 : 2000Ψ 23.080.Horizontal Method for the Detection 13 Pages and Enumeration of Presumptive Escherichia Coli .040.060.100.00 Published by GSA in 2006 Corrugated Medium .040. indicators and operator controls) in order to instruct the persons handling the equipment as to its use and operation.45 Published by GSA in 2006 Polypropylene (PP) Fittings for Pipes under Pressure . __________________________________________________________________________________________ GS ISO 7259 : 1988Ψ Published by GSA in 2006 Predominantly Key-operated Cast Iron Gate Valves for underground use 23.20 16 Pages Gr 2 This standard covers graphical symbols which are to be placed on thermal cutting equipment (e. __________________________________________________________________________________________ GS ISO 7251 : 2005Ψ 07.Most Probable Number Technique Gr 2 This standard gives general guidelines for the detection and enumeration of presumptive Escherichia coli by means of the liquid-medium culture technique and calculation of the most probable number (MPN) after incubation at 37 °C.Sockets for Fusion using Heated 3 Pages Tools . __________________________________________________________________________________________ GS ISO 7287 : 2002Ψ Published by GSA in 2006 Graphical Symbols for Thermal Cutting Equipment 01.g.Dimensions of Sockets Gr 1 This standard specifies the dimensions of sockets for polypropylene (PP) fittings intended for fusion with heated tools to polypropylene pipes under pressure.40 Published by GSA in 2006 Hydraulic Fluid Power — Quick-Action Couplings — Part 2: Test Methods 22 Pages Gr 3 This standard specifies different test methods which could be applied to quick-action couplings. __________________________________________________________________________________________ 225 .01 Published by GSA in 2006 Pipe Components . __________________________________________________________________________________________ GS ISO 7263 : 1994Ψ 85.30 Published by GSA in 2005 Microbiology of Food and Animal Feeding Stuffs . __________________________________________________________________________________________ GS ISO 7279 : 1984Ψ 23. 060 7 Pages Gr 1 It specifies a method for the determination of the fat acidity of milled cereal products. __________________________________________________________________________________________ GS ISO 7309 : 1985Ψ 43.160.30 Published by GSA in 2006 Gas Welding Equipment — Pressure Regulators for Manifold Systems used in Welding. __________________________________________________________________________________________ GS ISO 7304 : 1985Ψ 67.30 Published by GSA in 2006 Quick-Action Couplings with Shut-off Valves for Gas Welding.Determination of Fat Acidity 67.100.ISO Reference Petroleum Base Fluid 1 Page Gr 1 This standard specifies the composition and required characteristics of a reference fluid used for the testing of hydraulic braking systems and components mounted on road vehicles __________________________________________________________________________________________ GS ISO 7326 : 2006Ψ 23.40 Published by GSA in 2005 Milk Based Edible Ices and Ice Mixes .CATALOGUE OF GHANA STANDARDS ©GSA 2012 _________________________________________________________________________________________ GS ISO 7289 : 1996Ψ 25. of the cooking quality of alimentary pasta in the form of spaghetti.Estimation of Cooking Quality of Spaghetti by Sensory Analysis 10 Pages Gr 1 This standard specifies a method for the estimation. Cutting and Allied Processes up to 300 17 Pages Bar Gr 2 This standard specifies requirements and test methods for pressure regulators in manifold systems for welding. 75. __________________________________________________________________________________________ GS ISO 7291 : 1999Ψ 25.060 Published by GSA in 2007 Durum Wheat Semolinas and Alimentary Pasta.040. by sensory analysis. It is applicable to flours and semolinas obtained from wheat and durum wheat.Determination of Fat Content .Hydraulic Braking Systems .040. and also to pasta.40.Assessment of Ozone Resistance Under Static Conditions 7 Pages Gr 1 This standard specifies five methods for determining the ozone resistance of the outer covers of hoses __________________________________________________________________________________________ GS ISO 7328 : 1999Ψ 67. expressed by the surface condition and firmness characteristics __________________________________________________________________________________________ GS ISO 7305 : 1998Ψ Published by GSA in 2007 Milled Cereal Products .080 Published by GSA in 2006 Road Vehicles .Gravimetric 14 Pages Method (Reference Method) Gr 2 This standard specifies the reference method for the determination of the fat content of most milk based edible ices and ice mixes. __________________________________________________________________________________________ 226 .70 Published by GSA in 2006 Rubber and Plastics Hoses . cutting and allied processes.160. Cutting and Allied Processes 7 Pages Gr 1 This standard defines the specifications and the type tests for quick action couplings with shut-off valves. plastic-faced Seals used in reciprocating applications. Plastic-Faced Seals 4 Pages Dimensions and Tolerantes . __________________________________________________________________________________________ GS ISO 7379 : 1983Ψ Published by GSA in 2006 Hexagon Socket Head Shoulder Screws 21.20 Published by GSA in 2006 Hydraulic Fluid Power .Two-Port Slip-in Cartridge Valves .100. __________________________________________________________________________________________ GS ISO 7425-2 : 1989Ψ 23. __________________________________________________________________________________________ GS ISO 7380 : 2004Ψ Published by GSA in 2006 Hexagon Socket Button Head Screws 21.220.Characterization Part 1 : Basic Test Methods 10 Pages Gr 1 This standard specifies the basic test methods for adhesives with solvents for the assembly of u PVC pipe elements for characterization purposes. __________________________________________________________________________________________ GS ISO 7387-1 : 1983Ψ 83.10 4 Pages Gr 1 This standard specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16. __________________________________________________________________________________________ GS ISO 7425-1 : 1988Ψ 23.Cavities 17 Pages Gr 2 This standard specifies the dimensions and other data relating to cavities in which two-port hydraulic slip-in cartridge valves are mounted in Order to ensure interchangeability.Dimensions and 5 Pages Tolerances Part 1 : Piston Seal Housings Gr 1 This standard specifies the dimensions and associated tolerances for a series of Piston seal housings to accommodate elastomer-energized.060. with product grade A.060.20 Published by GSA in 2006 Hydraulic Fluid Power .100.10 3 Pages Gr 1 This standard specifies requirements for whole aniseed (Pimpinella anisum Linnaeus).10 5 Pages Gr 1 This standard lays down the specification for hexagon socket head shoulder screws with metric dimensions and nominal shoulder diameters from 65 to 25 mm inclusive.100.Plastic-Faced Seals .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7368 : 1989Ψ 23.50 Published by GSA in 2006 Hydraulic Fluid Power .Part 2 : Rod Seal Housings Gr 1 This standard specifies the dimensions and associated tolerantes for a series of hydraulic cylinder rod seal housings __________________________________________________________________________________________ 227 .Housings for Elastomer-Energized.180 Published by GSA in 2006 Adhesives with Solvents for Assembly of u PVC Pipe Elements .Specification 67.Housings for Elastomerenergized. __________________________________________________________________________________________ GS ISO 7386 : 1984Ψ Published by GSA in 2006 Aniseed (Pimpinella Anisum Linnaeus) . Balancing Machines — Enclosures and other Protective 23 Pages Measures for the Measuring Station Gr 3 This standard specifies requirements for enclosures and other protective measures used to minimize mechanical hazards produced by the rotor in the unbalance measuring station of centrifugal (rotational) balancing machines.Determination of 5-Hydroxymethylfurfural (5-HMF) Content 3 Pages Gr 1 This standard specifies a method for the determination of the 5-hydroxymethylfurfural (5-HMF) content of products produced by the thermal processing of fruits and vegetables __________________________________________________________________________________________ GS ISO 7475 : 2002Ψ 21.30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products . __________________________________________________________________________________________ GS ISO 7436 : 1983Ψ Published by GSA in 2006 Slotted Set Screws with Cup Point 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7434 : 1983Ψ Published by GSA in 2006 Slotted Set Screws with Cone Point 21. __________________________________________________________________________________________ GS ISO 7466 : 1986Ψ 67.180.Calibration of Vertical Cylindrical Tanks 62 Pages Part 1 : Strapping Method Gr 7 This standard specifies a method for the calibration of substantial vertical cylindrical tanks by measuring the tank using a strapping tape __________________________________________________________________________________________ 228 .40 Published by GSA in 2006 Mechanical Vibration .2 to M 12 inclusive and product grade A. as specified in the relevant product standard.6 to M 12 inclusive and product grade A.10 3 Pages Gr 1 This standard specifies the characteristics of slotted set screws with long dog Point and thread sizes from M 1.080.060.020. __________________________________________________________________________________________ GS ISO 7507-1 : 2003Ψ 75.6 to M 12 inclusive and product grade A.060.10 3 Pages Gr 1 This standard specifies the characteristics of slotted set screws with cup Point and thread sizes from M 1.30 8 Pages Gr 1 This standard specifies a method for determining the ability of metallic materials to undergo plastic deformation in bending.01 Published by GSA in 2006 Fruit and Vegetable Products . It also applies to test pieces taken from metallic products.060.120. __________________________________________________________________________________________ GS ISO 7435 : 1983Ψ Published by GSA in 2006 Slotted Set Screws with Long Dog Point 21.10 3 Pages Gr 1 This standard specifies the characteristics of slotted set screws with cone Point and thread sizes from M 1. __________________________________________________________________________________________ GS ISO 7438 : 2005Ψ Published by GSA in 2007 Metallic Materials — Bend Test 23. CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7507-2 : 2005Ψ 75. by means of internal measurement using an electro .Determination of Total Ash 67. by means of external measurement using an electro .180.insulated vertical cylindrical tanks having diameters greater than 5m.Reference .Line Method 26 Pages Gr 3 This standard specifies a method for the calibration of tanks above eight metres in diameter with cylindrical courses that are substantially vertical.Calibration of Vertical Cylindrical Tanks 38 Pages Part 3 : Optical .Calibration of Vertical Cylindrical Tanks Part 2 : Optical .Ranging Method 10 Pages Gr 1 This standard specifies a method for the calibration of non .10 2 Pages Gr 1 This standard specifies a method for the determination of the total ash of instant tea in solid form __________________________________________________________________________________________ GS ISO 7516 : 1984Ψ Published by GSA in 2007 Instant Tea in Solid Form .30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products .optical distance . and for the subsequent compilation of tank capacity tables __________________________________________________________________________________________ GS ISO 7513 : 1990Ψ 67.30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products .Determination of Moisture Content (Loss in Mass at 103*C) 2 Pages Gr 1 This standard specifies a method for the determination of the moisture content of instant tea in solid form as received.180.Triangulation Method Gr 4 This standard specifies a calibration procedure for application to tanks above eight metres in diameter with cylindrical courses that are substantially vertical. __________________________________________________________________________________________ GS ISO 7514 : 1990Ψ Published by GSA in 2007 Instant Tea in Solid Form .10 4 Pages Gr 1 This standard specifies a methods of sampling instant tea in solid form __________________________________________________________________________________________ 229 . It provides a method for determining the volumetric quantity contained within a tank at gauged liquid levels __________________________________________________________________________________________ GS ISO 7507-3 : 2006Ψ 75. It provides a method for determining the volumetric quantity contained within a tank at gauged liquid levels __________________________________________________________________________________________ GS ISO 7507-4 : 1995Ψ 75.Sampling 67.30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products .140.Optical Distance .30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products .180.Ranging Method Gr 2 This standard specifies a method for the calibration of non .ranging instrument.10 Published by GSA in 2007 Instant Tea in Solid Form .insulated vertical cylindrical tanks having diameters greater than 5m.Calibration of Vertical Cylindrical Tanks 11 Pages Part 5 : External Electro .Calibration of Vertical Cylindrical Tanks Part 4 : Internal Electro .140. and for the subsequent compilation of tank capacity tables __________________________________________________________________________________________ GS ISO 7507-5 : 2000Ψ 75.ranging method (EODR).Optical Distance .optical distance .140.180. e. __________________________________________________________________________________________ GS ISO 7543-1 : 1994Ψ 67. by high-performance liquid chromatography.65 5 Pages Gr 1 This standard specifies a series of wire rope Slings for general purposes.Determination of total capsaicinoid content Part 1:Spectrometric Method 4 Pages Gr 1 Specifies a method for the determination.25 34 Pages Gr 4 This standard defines terms concerning anodized aluminium. of the total capsaicinoid content of whole or powdered chillies (usually Capiscum frutescens L. __________________________________________________________________________________________ GS ISO 7583 : 1986Ψ Published by GSA in 2006 Anodizing of Aluminium and its Alloys.) and their extracts (oleoresins). __________________________________________________________________________________________ GS ISO 7542 : 1984Ψ 67.10 Published by GSA in 2006 Chillies and Chilli Oleoresins .140. The standard covers manual as well as computer-generated parts lists.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7531 : 1987Ψ Published by GSA in 2006 Wire Rope Slings for General Purposes .110 8 Pages Gr 1 This standard provides minimum requirements for parts lists to provide necessary information. by a spectrometric method. procurement or maintenance of the parts. __________________________________________________________________________________________ GS ISO 7541 : 1989Ψ 67.10 Published by GSA in 2006 Ground (powdered) Paprika (Capsicum annuum Linnaeus) 6 Pages Microscopical Examination Gr 1 This standard describes the morphological and anatomical structure of paprika (Capsicum annuum Linnaeus) and specifies a method for the microscopical examination ofground (powdered) paprika. of the total capsaicinoid content of whole or powdered chillies (usually Capsicum frutescens L.Determination of Total Capsaicinoid Content Part 2: Method using High-Performance Liquid Chromatography 5 Pages Gr 1 Specifies a method for the determination. for the production. __________________________________________________________________________________________ GS ISO 7573 : 2008Ψ Published by GSA in 2010 Technical product documentation — Parts lists 01. Lt covers the type of Sling. __________________________________________________________________________________________ 230 .10 Published by GSA in 2006 Ground (powdered) Paprika .220. the working load limit.10 Published by GSA in 2006 Chillies and Chilli Oleoresins . and the manufacture of Slings and Sling Assemblies.g.220.Vocabulary 01.220.Characteristics and Specifications 77.) and their oleoresins.Determination of Total Natural Colouring Matter Content 3 Pages Gr 1 Specifies a method for the determination of the total natural colouring matter content of ground (powdered) Paprika.040. __________________________________________________________________________________________ GS ISO 7543-2 : 1993Ψ 67.220. i.040 6 Pages Gr 1 Describes the method for determining the colour co-ordinates of paint films.Colorimetry . in product grade A for threads up to and including M16 and product grade B for threads above M16.060. __________________________________________________________________________________________ GS ISO 7724-1 : 1984Ψ 87. __________________________________________________________________________________________ GS ISO 7719 : 1997Ψ 21.220. lists methods of test for checking the characteristic properties.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7599 : 1983Ψ 25. with threads from M5 up to and including M36. __________________________________________________________________________________________ 231 .70 3 Pages Gr 1 This standard specifies a method for determining the abrasion of a hose lining when a certain amount of specified grit is passed through the hose.Determination of Abrasion of Lining 23. __________________________________________________________________________________________ GS ISO 7720 : 1997Ψ Published by GSA in 2006 Prevailing Torque Type All-Metal Hexagon Nuts.10 Published by GSA in 2006 Countersunk Flat Head Screws -Part 2: Penetration Depth of Cross Recesses 3 Pages Gr 1 This standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow. It defines the characteristic properties of anodic Oxide coatings on aluminium. with threads from M5 up to and including M36. when examined with normal vision. 8 and 10. Style 2 — Property Class 9 21. __________________________________________________________________________________________ GS ISO 7724-2 : 1984Ψ Published by GSA in 2005 Paints and Varnishes . and with property classes 5. of style 1.040 Published by GSA in 2005 Paints and Varnishes .General Specifications for Anodic Oxide Coatings on Aluminium 7 Pages Gr 1 This standard lays down general specifications for anodic Oxide coatings on aluminium. monochromatic. __________________________________________________________________________________________ GS ISO 7721-2 : 1990Ψ 21. Style 1 — Property Classes 5.20 4 Pages Gr 1 This standard specifies the characteristics of prevailing torque type all-metal hexagon nuts.060. specifies minimum Performance __________________________________________________________________________________________ GS ISO 7662 : 1988Ψ Published by GSA in 2006 Rubber and Plastics Hoses .20 Published by GSA in 2006 Anodizing of Aluminium and its Alloys .040. and with property class 9.ColorimetryPart 1: Principles 5 Pages Gr 1 Describes the calorimetric terms and fundamental requirements necessary for determining the colour co-ordinates of paint films and related materials.20 Published by GSA in 2006 Prevailing Torque Type All-Metal Hexagon Nuts. of style 2.060. The method is only applicable to paint films that appear to be uniformly of one colour. in product grade A for threads up to and including M16 and product grade B for threads above M16. 8 and 10 4 Pages Gr 1 This standard specifies the characteristics of prevailing torque type all-metal hexagon nuts. respectively).Part 2: Colour Measurement 87.e. Paint films that do not completely hide a non-transparent substrate represent an opaque system and may be measured by using the procedure described in this part of IS0 7724. __________________________________________________________________________________________ GS ISO 7842 : 1988Ψ 23.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . __________________________________________________________________________________________ GS ISO 7771 : 1985Ψ 59. in use.30 Published by GSA in 2006 Textiles . 03 and 05 —Clamping Dimensions Gr 1 This standard specifies clamping dimensions of four-port modular stack valves and fourport directional control valves.Determination of Dimensional Changes of Fabrics Induced by Cold-Water 4 Pages Immersion Gr 1 This standard specifies a method for determination of the dimensional changes that occur when a fabric is subjected to immersion in cold water without agitation.Test Methods 23. are subjected to cold water without agitation.Instruments for Measuring Physical 51 Pages Quantities Gr 6 This standard specifies the minimum characteristics of instruments for measuring physical quantities characterizing an environment as well as the methods for measuring the physical quantities of this environment. __________________________________________________________________________________________ GS ISO 7726 : 1998Ψ 13. 03 and 05. and dried.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7724-3 : 1984Ψ 87.Test Methods Gr 1 This standard specifies two test methods to determine the discharge capacity of automatic steam traps to GS ISO 6552. __________________________________________________________________________________________ 232 .060.Determination of Polyunsaturated Fatty Acids with 5 Pages A CIS 1.040 Published by GSA in 2005 Paints and Varnishes .060.01 Published by GSA in 2006 Automatic Steam Traps . __________________________________________________________________________________________ GS ISO 7790 : 1997Ψ 23. sizes 02.Determination of Steam Loss . 4-Diene Structure Gr 1 This standard specifies an enzymic method for the determination in animal and vegetable fats and oils of polyunsaturated fatty acids.100.50 Published by GSA in 2006 Hydraulic Fluid Power — Four-Port Modular Stack Valves and Four-Port Directional 4 Pages Control Valves.080. __________________________________________________________________________________________ GS ISO 7841 : 1988Ψ Published by GSA in 2006 Automatic Steam Traps . __________________________________________________________________________________________ GS ISO 7847 : 1987Ψ 67. on mounting surfaces.180 Published by GSA in 2006 Ergonomics of the Thermal Environment . Sizes 02.Determination of Discharge 11 Pages Capacity .ColorimetryPart 3: Calculation of Colour Difference 3 Pages Gr 1 Describes a method for the quantitative calorimetric evaluation of small colour differences between paint films.200.01 11 Pages Gr 2 This standard specifies two test methods to determine the steam loss of automatic steam traps. It is applicable to fabrics which. 140.100. __________________________________________________________________________________________ GS ISO 7905-3 : 1995Ψ 21.Alloy-Coated Steel Barbed Wire 6 Pages Gr 1 This standard specifies the characteristics of zinc.60 5 Pages Gr 1 The standard specifies a method for the measurement of the electrical conductivity of all types of water.coated steel barbed wire with conventional and reverse twist consisting of two stranded line wires. __________________________________________________________________________________________ GS ISO 7905-4 : 1995Ψ 21.Examination and Determination of Colour 13.and zinc .10 Published by GSA in 2006 Plain Bearings . __________________________________________________________________________________________ GS ISO 7905-2 : 1995Ψ 21.Zinc.Bearing Fatigue 7 Pages Part 4: Tests on Half-Bearings of a Metallic Multilayer Bearing Material Gr 1 This Standard specifies a method for the determination of the endurance limit in fatigue of half bearings of multilayer bearing materials.060. around which the barbs are tightly wound.Determination of Resistance to Damage by Flexing 9 Pages Gr 1 This standard describes three methods of assessing the resistance of coated fabrics to damage by repeated flexing. __________________________________________________________________________________________ GS ISO 7888 : 1985Ψ Published by GSA in 2008 Water Quality . a twist being imparted between the barbs to restrict their movement.100.Determination of Electrical Conductivity 13.and Zinc.060.65 Published by GSA in 2006 Steel Wire and Wire Products for Fences .10 Published by GSA in 2006 Plain Bearings .alloy.wire entanglement has a single line wire.60 8 Pages Gr 1 This standard specifies three methods for the examination of colour. __________________________________________________________________________________________ GS ISO 7900 : 2006Ψ 77.Bearing Fatigue Part 3: Test on Plain Strips of a Metallic Multilayer Bearing Material 4 Pages Gr 1 This standard specifies a method for the determination of the endurance limit in fatigue of plain strips of multilayer bearing materials.100. around which the barbs are wound.140 Published by GSA in 2006 Rubber -or Plastics-Coated Fabrics .Bearing Fatigue Part 2: Test with a Cylindrical Specimen of a Metallic Bearing Material 3 Pages Gr 1 This standard specifies a method for the determination of the endurance limit in fatigue of bearing materials alone (not attached to steel backing). The barbed.10 Published by GSA in 2006 Plain Bearings .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7854 : 1995Ψ 83. __________________________________________________________________________________________ GS ISO 7887 : 1994Ψ Published by GSA in 2008 Water Quality . __________________________________________________________________________________________ 233 . Determination of Copper Content .4 Pages Specification Gr 1 Specifies requirements for bitter fennel seed.Measurements on rotating shafts and Evaluation Criteria 12 Pages Part 5: Machine Sets in Hydraulic Power Generating and Pumping Plants Gr 2 The standard gives guidelines for applying shaft vibration evaluation criteria.Reciprocating machines . Vegetables and Derived Products .) .processed dried oregano leaves of Origanum genus.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7919-5 : 1997Ψ 17.160 . __________________________________________________________________________________________ GS ISO 7927-1 : 1987Ψ 67.220. Vulgare ) . in the whole or ground (powdered) form.Specification 5 Pages Gr 1 Specifies requirements for processed or semi.100.Method Using Flame Atomic Absorption Spectrometric Method 5 Pages Gr 1 This standard specifies a flame atomic absorption spectrometric method for the determination of the copper content of fruits.160.080.Horizontal Method for the Detection of Salmonella spp 13 Pages Gr 2 Specifies a horizontal method for the enumeration of viable presumptive Bacillus cereus by means of the colony count technique at 30°C __________________________________________________________________________________________ GS ISO 7952 : 1994Ψ 67. Whole or Ground (Powdered ) Part 1: Bitter Fennel Seed (Foeniculum Vulgare P. whole or ground (powdered).10 Published by GSA in 2005 Fennel Seed.10 Published by GSA in 2005 Dried Oregano (Origanum vulgare L..General Guidance for the Detection of Yeast and Moulds . __________________________________________________________________________________________ 234 .01 Published by GSA in 2006 Fruits. vegetables and derived products __________________________________________________________________________________________ GS ISO 7954 : 1987Ψ 07.30 Published by GSA in 2005 Microbiology of Food and Animal Feeding Stuffs .40 Published by GSA in 2006 Mechanical Vibration of Non. measured at or close to the bearings of machines or machine sets in hydraulic power generating and pumping plants. Miller VR. especially for use in back-ups __________________________________________________________________________________________ GS ISO 7932 : 2004Ψ 07.160.01 Published by GSA in 2005 Microbiology .100. excluding Origanum majorana.30 Published by GSA in 2006 Insulation Caps and Bushes for Resistance Welding 2 Pages Equipment Gr 1 This standard specifies dimensions and requirements for insulated caps and bushes in the secondary circuit for resistance welding equipment.Whole or Ground Leaves . __________________________________________________________________________________________ GS ISO 7925 : 1999Ψ 67.220. __________________________________________________________________________________________ GS ISO 7931 : 1985Ψ 25. species and sub-species. under normal operating conditions. 29.Colony Count 3 Pages Technique at 25º C Gr 1 This standard gives general guidance for the enumeration of viable yeasts and moulds in products intended for human consumption or feeding of animals by means of the colony count technique at 25º C. Determination of the Viscosity of Flour. __________________________________________________________________________________________ GS ISO 8015 : 1985Ψ 01. except for hoses intended for use with Petroleum fuels for combustion engines. __________________________________________________________________________________________ GS ISO 8032 : 1997Ψ 23.70 Published by GSA in 2006 Rubber and Plastics Hoses and Hose Assemblies . and the electrical discontinuity.Flexing Combined with Hydraulic ImpulseTest 3 Pages (Half-Omega Test) Gr 1 This standard specifies a method of flexing.Method using an Amylograph Gr 1 8 Pages This standard specifies a method using an amylograph for determining the viscosity of a suspension of flour in water.040. in which the starch is gelatinized by heating in order to assess the conditions of gelatinization of the flour. __________________________________________________________________________________________ GS ISO 8031 : 1993Ψ 23. __________________________________________________________________________________________ GS ISO 8030 : 1995Ψ Published by GSA in 2006 Rubber and Plastics Hoses .20 Published by GSA in 2006 Technical Drawings .Determination of Electrical Resistance 4 Pages Gr 1 This standard specifies methods for electrical tests on rubber and plastics hoses and hose assemblies to determine the resistance of conductive.10 13 Pages Gr 2 This standard specifies a system of tolerance grades and required machining allowance grades for the dimensions of castings.Fundamental Tolerancing Principle 5 Pages Gr 1 This standard specifies the principle of the relationship between dimensional (linear and angular) tolerances and geometrical tolerances.040.70 Published by GSA in 2006 Rubber and Plastics Hose Assemblies . __________________________________________________________________________________________ 235 . hydraulic hose assemblies during impulse testing. It covers all bore sizes and the following types of hose construction: __________________________________________________________________________________________ GS ISO 8062 : 1994Ψ Published by GSA in 2006 Castings .System of Dimensional Tolerances and Machining Allowances 17.040.70 Published by GSA in 2006 Rubber and Plastics Hose . in an arrangement known as a ‘halfomega”.220. between cover and reinforcement and between reinforcement layers.100.Method of Test for Flammability 13.060 Published by GSA in 2007 Cereals and Milled Cereal Products.40 4 Pages Gr 1 This standard specifies a method for assessing the flammability of hoses. the electrical continuity between fittings.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 7973 : 1992Ψ 67. __________________________________________________________________________________________ GS ISO 8033 : 2006Ψ 23.Determination of Adhesion between Components 11 Pages Gr 2 This standard specifies methods for the determination of the adhesion between lining and reinforcement.040. antistatic and nonconductive hoses. 20 Published by GSA in 2006 Hydraulic Fluid Power — Single Rod Cylinders.Specification for hose assemblies for Equipment for Welding. __________________________________________________________________________________________ GS ISO 8233 : 1988Ψ 23.160. if supplied in assembled condition for equipment for gas welding. __________________________________________________________________________________________ GS ISO 8132 : 2006Ψ 23.Temperature Corrections for use when 6 Pages Calibrating Volumetric Proving Tanks Gr 1 This standard specifies multiplication factors for the correction of the volume of water transferred from a primary measure to a tank for changes arising from temperature differences during the determination of the capacity of the tank at reference temperature.180.100.30 Published by GSA in 2007 Petroleum Measurement Systems .20 Published by GSA in 2010 Pneumatic fluid power — Cylinders.100.Determination of Sodium and Potassium Contents Flame Emission Spectrometric Method 3 Pages Gr 1 This standard specifies a flame emission spectrometric method for the determination of the sodium and potassium contents of all types of dried milk. __________________________________________________________________________________________ 236 .100. __________________________________________________________________________________________ GS ISO 8207 : 1996Ψ 25.060. 16 Mpa (160 bar) Medium and 11 Pages 25 Mpa (250 Bar) Series — Mounting Dimensions for Accessories Gr 2 This standard lays down the mounting dimensions required for the interchangeability of accessories for the 16 MPa [160 bar1)] medium series cylinders __________________________________________________________________________________________ GS ISO 8140 : 2009Ψ 23.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8070 : 2007Ψ 67.Torque . cutting and allied processes.01 Published by GSA in 2006 Thermoplastics Valves . The rod-end clevises have been designed specifically for use with 1 000 kPa [10 bar1)] __________________________________________________________________________________________ GS ISO 8167 : 1989Ψ Published by GSA in 2006 Projections for Resistance Welding 25. It includes the appropriate design and dimensions for tools.30 Published by GSA in 2006 Gas Welding Equipment .30 3 Pages Gr 1 This standard specifies the characteristics and dimensions of projections for resistance welding. 1 000 kPa (10 bar) series — Mounting dimensions of 4 Pages rod-end clevises Gr 1 This standard specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. 5 Pages Cutting and Allied Processes Gr 1 This standard specifies performance and rest requirements of hose assemblies using rubber hose. __________________________________________________________________________________________ GS ISO 8222 : 2002Ψ 75.160.Calibration .Test Method 2 Pages Gr 1 This standard specifies a test method for the determination of the opening and closing torque of thermoplastics valves.10 Published by GSA in 2005 Dried Milk . initial suspensions and decimal dilutions for the microbiological examination of milk and milk products. for all hose sizes and constructions: a practical comparative test.].220. etc.Determination of Solid Fat Content .20 Published by GSA in 2006 Anodized Aluminium and Aluminium Alloys .100.Determination of FatContent by the Weibull . __________________________________________________________________________________________ 237 . Initial Suspensions and Decimal Dilutions for Microbiological Examination 12 Pages Gr 2 This standard describes general guidelines for the preparation of test samples. including milk-based infant foods. or of egg yolk or of fruit. expressed as Ferrite Number (FN). method B.General Guidance for the Preparation of Test Samples. those milk-based and other types of infant food that contain more than 5 % (mass fraction) (dry matter) of starch or dextrin. for hose and tubing up to internal diameter.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8249 : 2000Ψ 25.Berntrop Gravimetric Method (Reference Method)Part 1: Infant Foods 8 Pages Gr 1 Specifies the reference method for the determination of the fat content of infant foods to which the Röse-Gottlieb method is not applicable [i.Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-austenitic Cr-Ni Stainless 26 Pages Steel Weld Metals Gr 3 This standard specified the method and apparatus for the measurement of the delta ferrite content.040.Based Foods.Measurement of Wear Resistance and Wear Index of Anodic Oxide Coatings with an Abrasive Wheel Wear Test Apparatus Gr 1 6 Pages This standard specifies a method of test for determining the wear resistance and the wear index of anodic oxidation coatings on flat specimens of aluminium and its alloys by means of an abrasive wheel wear test apparatus. __________________________________________________________________________________________ GS ISO 8261 : 2001Ψ 07.e.40 Published by GSA in 2006 Welding . __________________________________________________________________________________________ GS ISO 8262-1 : 2005Ψ 67.01 Published by GSA in 2005 Milk Products and Milk . those products containing high levels of stabilizer or thickening agent.01 Published by GSA in 2005 Milk Products and Milk .10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . __________________________________________________________________________________________ GS ISO 8262-2 : 2005Ψ 67. __________________________________________________________________________________________ GS ISO 8292 : 1991Ψ 67.Based Foods . or vegetable.Determination of Fat by the Weibull . and comprise: method A.Berntrop Gravimetric Method 9 Pages (Reference Method)Part 2 : Edible Ices and Ice Mixes Gr 1 Specifies the reference method for the determination of the fat content of edible ices and ice-mixes to which the Röse-Gottlieb method is not applicable (i.70 Published by GSA in 2010 Rubber and plastics hoses and tubing — Determination of transmission of liquids through hose and 7Pages tubing walls Gr 1 This standard specifies two methods for the determination of transmission of liquids through hose and tubing walls.200.160.30 Published by GSA in 2006 Milk and Milk Products . or of combinations of these constituents).Pulsed 4 Pages Nuclear Magnetic Resonance Method Gr 1 This standard specifies a method for the determination of the solid fat content animal and vegetable fats and oils using low-resolution pulsed nuclear magnetic resonance __________________________________________________________________________________________ GS ISO 8308 : 2006Ψ 23. simulating working conditions. in largely austenitic and duplex ferriticustenitic stainless steel __________________________________________________________________________________________ GS ISO 8251 : 1987Ψ 25. Both methods are applicable to rubber and plastics hose and tubing.e. fruit. meat.100. 200. __________________________________________________________________________________________ GS ISO 8419 : 2003Ψ 21. 15N/J and 25N/J (Lengths in the Effective System) 7 Pages Gr 1 This standard specifies.040. and where a clamp is used to fix the holder directly to the welding.23.220.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8330 : 2007Ψ 01.4 mm).Determination of Content of Polar Compounds 8 Pages Gr 1 The standard describes a method for the determination of the content of polar compounds in animal and vegetable fats and oils.160. for narrow V-belts of cross-sections 9N/J (for pulley grooves of effective width 8. 15N/J (for pulley grooves of effective width 15.Electrode Holders .Electrode Holders .Part 2 : Morse Taper Fixing 25.30 Published by GSA in 2006 Resistance Spot Welding .Determination of Fat Content . __________________________________________________________________________________________ GS ISO 8430-1 : 1988Ψ Published by GSA in 2006 Resistance Spot Welding .Electrode Holders Part 3 : Parallel Shank Fixing for End Thrust 3 Pages Gr 1 This standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type C) without offset and with a facility for cable clamping. The terms are listed alphabetically in English. __________________________________________________________________________________________ 238 .99 Published by GSA in 2005 Milk-Based Infant Foods .9 mm).040.70 Published by GSA in 2010 Rubber and plastics hoses and hose assemblies — Vocabulary 38 Pages Gr 4 This standard defines terms used in the hose industry.160. __________________________________________________________________________________________ GS ISO 8430-2 : 1988Ψ Published by GSA in 2006 Resistance Spot Welding . 23. the synonymous term(s) follow the preferred term and are also listed in alphabetical order. When a term has one or more synonyms. __________________________________________________________________________________________ GS ISO 8420 : 2002Ψ 67.Gravimetric Method 15 Pages (Reference Method) Gr 2 This standard specifies the reference method for the determination of the fat content of milk-based infant foods.100.Part 1 : Taper Fixing 1 : 10 25.160. __________________________________________________________________________________________ GS ISO 8430-3 : 1988Ψ 25.2 mm) and 25N/J (for pulley grooves of effective width 25. __________________________________________________________________________________________ GS ISO 8381 : 2000Ψ 67.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .10 Published by GSA in 2006 Belt Drives — Narrow V-Belts — Sections 9N/J.30 3 Pages Gr 1 This standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type 9) without offset and with a facility for cable clamping. hereinafter referred to as fats.30 3 Pages Gr 1 This standard specifies the dimensions and tolerances of resistance spot welding electrode holders. 220. respectively).25 Published by GSA in 2006 Steel Wire for Mechanical Springs .220.Part 1: General Requirements 77. complying with the general requirements.30 Published by GSA in 2005 Woven Fabrics .10 Published by GSA in 2010 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness —Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings Gr 5 44 Pages This standard specifies a series of rust grades and preparation grades of steel surfaces (see Clauses 2 and 3.Vocabulary 22 Pages Gr 3 This standard describes defects which commonly appear during the inspection of woven piece . The various grades are defined by written descriptions together with photographs that are representative examples within the tolerance for each grade as described in words.220.20 Published by GSA in 2006 Rolling Bearings — Radial Ball Bearings with Flanged Outer Ring — Flange Dimensions 5 Pages Gr 1 This standard lays down flange dimensions for a selection of single-row radial or angular contact groove ball bearings with flanged outer ring.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products — Tests for the Assessment of surface cleanliness 6 Pages Part 2: Laboratory Determination of Chloride on Cleaned Surfaces Gr 1 This standard describes a method for the determination of chloride-containing salts that are readily soluble in water and are present on a steel surface. __________________________________________________________________________________________ GS ISO 8502-2 : 2005Ψ 25. The method is also applicable to previously coated surfaces.goods. suitable for the manufacture of mechanical springs.080.Description of Defects . __________________________________________________________________________________________ GS ISO 8498 : 1990Ψ 59.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paintsand Related Products -Visual Assessment of Surface Cleanliness Part 2:Preparation Grades of Previously Coated Steel Substrates after Localized Removal of Previous Coatings Gr 3 26 Pages This standard specifies a series of preparation grades for steel surfaces after localized removal of previous paint coatings This Standard specifies a series of preparation grades for steel surfaces after localized removal of previous paint coatings The various preparation grades are defined by written descriptions together with the representative photographic In addition.100. __________________________________________________________________________________________ GS ISO 8501-1 : 2007Ψ 25. __________________________________________________________________________________________ GS ISO 8458-2 : 2002Ψ 77.140.140. It will normally be used in a laboratory using washings sampled from surfaces on site.25 7 Pages Gr 1 This standard specifies general requirements for steel spring wire of round cross-section. photographs showing preparation grades P Sa 2% and P Ma are given. __________________________________________________________________________________________ GS ISO 8458-1 : 2002Ψ Published by GSA in 2006 Steel Wire for Mechanical Springs . __________________________________________________________________________________________ 239 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8443 : 1999Ψ 21. __________________________________________________________________________________________ GS ISO 8501-2 : 1994Ψ 25.Part 2: Patented Cold-Drawn Non-alloy Steel Wire 9 Pages Gr 1 This standard specifies requirements for cold-drawn non-alloy steel wire for the manufacture of mechanical springs for static duty and dynamic duty applications. The method uses ISO surface Profile comparators for assessing.Part 1 : Specifications and Definitions for IS0 Surface ProfileComparators for the Assessment of Abrasive Blast-Cleaned Surfaces Gr 1 6 Pages This standard specifies the requirements for IS0 surface profile comparators which are intended for visual and tactile comparison of steel substrates that have been blast-cleaned with either shot abrasives or grit abrasives.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products 13 Pages Surface Preparation Methods .10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Surface RoughnessCharacteristics of Blast-Cleaned Steel Substrates .220.Surface Roughness Characteristics of Blast-Cleaned Steel Substrates -Part 2 : Method for the Grading of Surface Profile of AbrasiveBlast-Cleaned Steel .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 25.Comparator Procedure Gr 1 3 Pages This standard describes a visual and tactile method for assessing the grade of the Profile that has been produced by one of the abrasive blast-cleaning procedures described in ISO 8504-2.87. the roughness of surfaces before the application of paint or other protective treatments.020 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Tests 5 Pages for the Assessment of Surface Cleanliness Part 9: Field Method for the Conductometric Determination of Water-Soluble Salts Gr 1 It describes a field method for the assessment of the total surface density of various water-soluble salts (mostly chlorides and sulfates) on steel surfaces before and/or after surface preparation. __________________________________________________________________________________________ GS ISO 8502-9 : 1998Ψ 25.10 Published by GSA in 2007 Preparation of Steel Substrates before Application ofPaints and Related Products . It also contains information on features that must be taken into account before certain surface preparation methods and preparation grades are selected and specified. __________________________________________________________________________________________ GS ISO 8504-1 : 2000Ψ 25.10 GS ISO 8502-3 : 1992Ψ Published by GSA in 2007 Preparation of Steel Substrates before Application of Paint and Related Products -Tests for the Assessment of Surface Cleanliness 8 Pages Part 3: Assessment of Dust on Steel Surfaces Preparedfor Painting (Pressure-Sensitive Tape Method) Gr 1 This standard describes a method for the assessment of dust remaining on cleaned steel surfaces prepared for painting. It also contains information on the effectiveness of the individual methods and their fields of application. Lt also provides descriptive classes for the assessment of the average size of the dust particles.10. the roughness of surfaces before the application of paints and related products or other protective treatments.220. Lt provides pictorial ratings for the assessment of the average quantity of dust. __________________________________________________________________________________________ GS ISO 8503-1 : 1988Ψ 25.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Surface Preparation methods. __________________________________________________________________________________________ GS ISO 8503-2 : 1988Ψ 25. IS0 surface profile comparators are for use in assessing.220. on site.220.Part 1: General Principles 5 Pages Gr 1 This standard describes the general principles for the selection of methods for the preparation of steel surfaces before application of paints and related products. on site.Part 2: Abrasive Blast-Cleaning Gr 2 This standard describes abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. __________________________________________________________________________________________ 240 .220.220. __________________________________________________________________________________________ GS ISO 8504-2 : 2000Ψ 25. 020 Published by GSA in 2007 Textiles . of the peel resistance of a bonded assembly of two adherends where one adherend is flexible and the other is rigid.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8504-3 : 1993Ψ 23. water and oil regardless of the source of the compressed air.020. __________________________________________________________________________________________ GS ISO 8653 : 1986Ψ 39. water and oil regardless of the source of the compressed air.70 Published by GSA in 2006 Rubber and Plastics Hoses .180 Published by GSA in 2010 Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 6 Pages 180° peel Gr 1 This specifies a 180° peel test for the determination. __________________________________________________________________________________________ GS ISO 8573-1 : 2001Ψ Published by GSA in 2006 Compressed Air .20 8 Pages Gr 1 This standard specifies purity classes of compressed air in respect of particles.060 Published by GSA in 2006 Jewellery .100. __________________________________________________________________________________________ GS ISO 8573-3 : 1999Ψ Published by GSA in 2006 Compressed Air .Ring Sizes . It describes the equipment to be used and the procedure __________________________________________________________________________________________ GS ISO 8510-2 : 2006Ψ 83. Measurement and Designation 1 Page Gr 1 This standard specifies the method for measuring the size of rings for the purposes of designing ring-sizes to e used in jewellery __________________________________________________________________________________________ 241 .Definition.20 8 Pages Gr 1 This standard specifies purity classes of compressed air in respect of particles. 1 This standard defines the location of body dimensions taken on anthropometric surveys and for the preparation of garment patterns and garment stands.Part 1: Contaminants and Purity Classes 71.30 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Surface Preparation Methods .Determination of Ultra-Violet Resistance under Static 4 Pages Conditions Gr 1 This standard specifies three methods for determining the resistance of the outer cover of hoses to ultra-violet light.and Power-Tool Cleaning 4 Pages Gr 1 This standard describes methods for hand-tool and power-tool cleaning of steel substrates before application of paints and related products.100.040. __________________________________________________________________________________________ GS ISO 8559 : 1989Ψ 61. It applies both to new steelwork and to steel surfaces that have been coated previously and that show areas of breakdown requiring maintenance painting. and specifies a standard procedure for measuring the body. __________________________________________________________________________________________ GS ISO 8580 : 1987Ψ 23.Part 3 : Test Methods for Measurement of Humidity 71.Garment Construction and Anthropometric Surveys .Part 3: Hand.Body Dimensions 9 Pages Gr. under specified conditions. Product Grades A and B 5 Pages Gr 1 This standard specifies the characteristics of hexagon nuts. Style 1.20 Published by GSA in 2006 Hexagon Nuts.Product Grades A and B 5 Pages Gr 1 This standard specifies the characteristics of hexagon nuts. with metric fine pitch thread. with Metric Fine Pitch Thread . __________________________________________________________________________________________ GS ISO 8675 : 1999Ψ 21. style 2. __________________________________________________________________________________________ GS ISO 8674 : 1999Ψ 21.Product Grades A and B 12 Pages Gr 1 This standard specifies the characteristics of hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 mm to 64 mm of product grade A for nominal thread diameters d from 8 mm to 24 mm __________________________________________________________________________________________ GS ISO 8681 : 1986Ψ 75.10 Published by GSA in 2006 Hexagon Head Screws with Metric Fine Pitch Thread .Product Grades A and B 6 Pages Gr 1 This standard specifies the characteristics of hexagon thin nuts (chamfered).060 3 Pages Gr 1 This standard specifies a limited number of colours of gold alloys. with repeated opening and closure.Method of Classification .20 Published by GSA in 2006 Hexagon Thin Nuts (Chamfered) with Metric Fine Pitch Thread .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8654 : 1987Ψ Published by GSA in 2006 Colours of Gold Alloys . lubricants and related products __________________________________________________________________________________________ 242 .060. Style 2. with Metric Fine Pitch Thread . style 1.20 Published by GSA in 2006 Hexagon Nuts.Definitions.Fatigue Strength .060. __________________________________________________________________________________________ GS ISO 8673 : 1999Ψ 21.01 2 Pages Gr 1 This standard specifies the endurance test necessary to confirm the ability of hand-operated plastics valves to withstand prolonged use. __________________________________________________________________________________________ GS ISO 8676 : 1999Ψ 21. with metric fine pitch thread.060. Range of Colours and Designation 39.Definition of Classes 3 Pages Gr 1 This standard establishes the general classification system which applies to petroleum products. __________________________________________________________________________________________ GS ISO 8659 : 1989Ψ Published by GSA in 2006 Thermoplastics Valves .060. with metric fine pitch thread.100 Published by GSA in 2007 Petroleum Products and Lubricants .060.Test Method 23. with nominal diameters d1 from 6 mm to 50 mm inclusive. through hardened or case hardened and martensitic stainless steel.50 3 Pages Gr 1 This standard specifies the characteristics of unhardened taper pins with internal thread.50 3 Pages Gr 1 This standard specifies the characteristics of unhardened taper pins with external thread. __________________________________________________________________________________________ GS ISO 8737 : 1986Ψ Published by GSA in 2006 Taper Pins with External Thread. of Unhardened Steel and Austenitic Stainless Steel 3 Pages Gr 1 This standard specifies the characteristics of parallel pins with internal thread of unhardened steel and austenitic stainless steel with nominal diameters d1 from 6 mm to 50 mm inclusive.060. dI.060.50 Published by GSA in 2006 Parallel Pins with Internal Thread.060.060.060. Unhardened 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8733 : 1997Ψ 21. dJ. from 6 to 50 mm inclusive.50 Published by GSA in 2006 Parallel Pins with Internal Thread. of Hardened Steel and Martensitic Stainless Steel 5 Pages Gr 1 This standard specifies the characteristics of parallel pins with internal thread of steel. __________________________________________________________________________________________ GS ISO 8739 : 1997Ψ 21.060.50 Published by GSA in 2006 Grooved Pins — Full-Length Parallel Grooved. and metric dimensions and nominal diameters. from 5 to 50 mm inclusive. __________________________________________________________________________________________ GS ISO 8735 : 1997Ψ 21. of Hardened Steel and Martensitic Stainless Steel (Dowel Pins) 21. Unhardened 21. __________________________________________________________________________________________ GS ISO 8736 : 1986Ψ Published by GSA in 2006 Taper Pins with Internal Thread.50 4 Pages Gr 1 This standard specifies the characteristics of parallel pins (dowel pins) of steel.060. from 1 mm to 20 mm inclusive. d.Product Grade 21. __________________________________________________________________________________________ 243 . through hardened or case hardened and martensitic stainless steel with nominal diameters. made of steel or austenitic stainless steel. and metric dimensions and nominal diameters. __________________________________________________________________________________________ GS ISO 8738 : 1986Ψ Published by GSA in 2006 Plain Washers for Clevis Pins .50 3 Pages Gr 1 This standard specifies the characteristics of plain washers for clevis pins which shall be used on the cotter pin end only. with Pilot 3 Pages Gr 1 This standard specifies the characteristics of full-length parallel grooved pins. __________________________________________________________________________________________ GS ISO 8734 : 1997Ψ Published by GSA in 2006 Parallel Pins. __________________________________________________________________________________________ GS ISO 8741 : 1997Ψ Published by GSA in 2006 Grooved Pins — Half-Length Reverse-Taper Grooved 21. d1.50 Published by GSA in 2006 Grooved Pins with Round Head 4 Pages Gr 1 This standard specifies the characteristics of round head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface.060. __________________________________________________________________________________________ GS ISO 8743 : 1997Ψ Published by GSA in 2006 Grooved Pins — Half-Length Centre Grooved 21.50 3 Pages Gr 1 This standard specifies the characteristics of half-length reverse taper grooved pins made of steel or austenitic stainless steel which have three equally spaced grooves impressed longitudinally on their exterior surface. ________________________________________________________________________________________ GS ISO 8744 : 1997Ψ Published by GSA in 2006 Grooved Pins — Full-Length Taper Grooved 21. with nominal diameter.5 mm to 25 mm inclusive. __________________________________________________________________________________________ GS ISO 8742 : 1997Ψ Published by GSA in 2006 Grooved Pins — One-Third-Length Centre Grooved 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8740 : 1997Ψ Published by GSA in 2006 Grooved Pins — Full-Length Parallel Grooved.060.4 mm to 20 mm inclusive. with Chamfer 21. d1. from 1.50 3 Pages Gr 1 This standard specifies the characteristics of full-length parallel grooved pins made of steel or austenitic stainless steel with chamfer which have three equally spaced grooves impressed longitudinally on their exterior surface and a pilot to facilitate insertion.060. __________________________________________________________________________________________ 244 . from 1.50 3 Pages Gr 1 This standard specifies the characteristics of half-length centre grooved pins made of steel or austenitic stainless steel. with nominal diameter.060. from 1. __________________________________________________________________________________________ GS ISO 8745 : 1997Ψ Published by GSA in 2006 Grooved Pins — Half-Length Taper Grooved 21.50 3 Pages Gr 1 This standard specifies the characteristics of half-length taper grooved pins made of steel or austenitic stainless steel.5 mm to 25 mm inclusive.060.50 3 Pages Gr 1 This standard specifies the characteristics of one-third-length centre grooved pins made of steel or austenitic stainless steel. with nominal diameter.060.060. d1. __________________________________________________________________________________________ GS ISO 8746 : 1997Ψ 21. with nominal diameter.5 mm to 25 mm inclusive. from 1. d1.50 3 Pages Gr 1 This standard specifies the characteristics of full-length taper grooved pins made of steel or austenitic stainless steel which have three equally spaced grooves impressed longitudinally on their exterior surface. over 10d or 150 mm. whichever is shorter.8 mm to 20 mm inclusive. with a nominal diameter.50 5 Pages Gr 1 This standard specifies the characteristics of coiled heavy duty spring-type straight pins made of steel or of austenitic or martensitic stainless steel.50 4 Pages Gr 1 This standard specifies the characteristics of countersunk head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface. __________________________________________________________________________________________ GS ISO 8751 : 2007Ψ Published by GSA in 2010 Spring-type straight pins — Coiled. d1.060.8 to 25 mm inclusive. with nominal diameter.Shear Test 21. l. up to and including 10d or 150 mm. d1.50 5 Pages Gr 1 This standard specifies the characteristics of coiled. __________________________________________________________________________________________ GS ISO 8750 : 2007Ψ Published by GSA in 2010 Spring-type straight pins — Coiled. from 1.060.060. __________________________________________________________________________________________ 245 . __________________________________________________________________________________________ GS ISO 8765 : 1999Ψ 21. from 1. l. and of product grade B for nominal thread diameters d over 24 mm or nominal lengths.10 Published by GSA in 2006 Hexagon Head Bolts with Metric Fine Pitch Thread — Product grades A and B 12 Pages Gr 2 This standard specifies the characteristics of hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 mm to 64 mm. __________________________________________________________________________________________ GS ISO 8778 : 2003Ψ Published by GSA in 2006 Pneumatic Fluid Power — Standard Reference Atmosphere 23. standard duty spring-type straight pins made of steel or of austenitic or martensitic stainless steel. light duty 21. with a nominal diameter. __________________________________________________________________________________________ GS ISO 8749 : 1986Ψ Published by GSA in 2006 Pins and Grooved Pins . with a nominal diameter.5 mm to 8 mm inclusive.060. heavy duty 21.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8747 : 1997Ψ Published by GSA in 2006 Grooved Pins with Countersunk Head 21. d1. d1.50 5 Pages Gr 1 This standard specifies the characteristics of coiled light duty spring-type straight pins made of steel or of austenitic or martensitic stainless steel.50 1 Page Gr 1 This standard specifies the test method for shear testing of metallic pins with nominal diameters from 0.01 10 Pages Gr 1 This standard specifies a standard atmospheric reference value to be used in pneumatic fluid power technology for stating the performance data of components and systems. standard duty 21.4 mm to 20 mm inclusive.100. from 1. whichever is shorter. from 0.060. of product grade A for nominal thread diameters d from 8 mm to 24 mm and nominal lengths.060.5 mm to 20 mm inclusive. __________________________________________________________________________________________ GS ISO 8748 : 2007Ψ Published by GSA in 2010 Spring-type straight pins — Coiled. 140.120.100.Spliced Eye Terminations for Slings 77.General Guidance for the Detection of Vibrio Paraheamolytius 12 Pages Gr 2 This standard gives general guidance for the detection of Vibrio parahaemolyticus present in products intended for human consumption or animal feeding stuffs. Studs and Nuts made of Non3 Pages Ferrous Metals Gr. and fitments) of a keyed assembly.65 5 Pages Gr 1 This standard specifies minimum requirements for spliced eye terminations for wire rope slings.Determination of Nitrogen Content . studs and nuts __________________________________________________________________________________________ GS ISO 8914 : 1990Ψ 07.Balancing .080.10 11 Pages Gr 2 Specifies a method for the determination of the nitrogen content of liquid milk.Rolling Bearings Part 1 : General Simplified Representation 2 Pages Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8790 : 1987Ψ 01. __________________________________________________________________________________________ GS ISO 8794 : 1986Ψ Published by GSA in 2006 Steel Wire Ropes .060.40 12 Pages Gr 2 This standard specifies a single convention for balancing the individual components (shafts or rotors.Part 1 : Kjeldahl Method 67. whole or skimmed. Screws.1 This standard specifies the mechanical properties of bolts.20 Published by GSA in 2006 Mechanical Properties of Fasteners . __________________________________________________________________________________________ GS ISO 8821 : 1989Ψ Published by GSA in 2006 Mechanical Vibration .Computer System Configuration Diagram Symbols and Conventions 14 Pages Gr 2 This standard establishes graphical symbols and their conventions for use in configuration diagrams for computer systems. by the Kjeldahl principle __________________________________________________________________________________________ 246 . __________________________________________________________________________________________ GS ISO 8826-1 : 1989Ψ 01.Bolts.50 Published by GSA in 2006 Information Processing Systems .01 Published by GSA in 2005 Microbiology . 1 The standard specifies the general simplified representation for rolling bearings __________________________________________________________________________________________ GS ISO 8839 : 1986Ψ 21. screws.Shaft and Fitment Key Convention 21.20 Published by GSA in 2006 Technical Drawings .100. __________________________________________________________________________________________ GS ISO 8968-1 : 2001Ψ Published by GSA in 2005 Milk . including automatic data processing Systems.100. 01 2 Pages Gr 1 This standard specifies a system for the designation of fasteners in product standards. 03.Rating system for the evluation of Pitting 9 Pages Corrosion .27.20 Published by GSA in 2006 Anodized Aluminium and Aluminium Alloys .020 14 Pages Gr 2 This standard specifies graphical symbols for operator controls.Part 5 : Determination of Protein .040.060.10 Published by GSA in 2005 Milk .100.Determination of Nitrogen Content . It is also recommended for these non-standardized fasteners.Fundamentals and Vocabulary 01. __________________________________________________________________________________________ GS ISO 8999 : 2001Ψ Published by GSA in 2006 Reciprocating Internal Combustion Engines — Graphical Symbols 01.Rating System for the Evaluation of Pitting Corrosion .10 30 Pages Gr 3 Describes fundamentals of quality management systems. __________________________________________________________________________________________ GS ISO 9000 : 2005Ψ Published by GSA in 2005 Quality Management Systems .080. gauges.060 Published by GSA in 2006 Anodized Aluminium and Aluminium Alloys . studs and nuts. Screws. screws.20 .060.03 . An alternative indirect method using calculations is also described.20 .Nitrogen Content 6 Pages Gr 1 This standard specifies a method for the direct determination of the protein-nitrogen content of liquid milk. tell-tale indicators and instructions for reciprocating internal combustion (RIC) engines in order to provide necessary information on their use and operation.120.77.Grid Method 2 Pages Gr 1 This standard specifies a grid rating system that provides a means of defining levels of performance of anodic oxide coatings on aluminium and its alloys that have been subjected to corrosion tests.20 4 Pages Gr 1 This standard specifies the general requirements for standardized bolts.220. __________________________________________________________________________________________ GS ISO 8992 : 2005Ψ Published by GSA in 2006 Fasteners — General Requirements for Bolts. __________________________________________________________________________________________ GS ISO 8991 : 1986Ψ Published by GSA in 2006 Designation System for Fasteners 21. whole or skimmed. __________________________________________________________________________________________ GS ISO 8993 : 1989Ψ 25. which form the subject of the ISO 9000 family and defines related terms __________________________________________________________________________________________ 247 .Chart Method Gr 1 This standard specifies a chart rating system based on standard chart that provides a means of defining levels of performance of anodic oxide coating on aluminium and its alloys that have been subjected to corrosion tests __________________________________________________________________________________________ GS ISO 8994 : 1989Ψ 25.220.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 8968-5 : 2001Ψ 67. Studs and Nuts 21. 10 23 Pages Gr 3 Specifies requirements for a quality management system where an organization needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements and aims to enhance customer satisfaction through the effective application of the system. __________________________________________________________________________________________ GS ISO 9004 : 2009Ψ Published by GSA in 2010 Quality Management Systems .30 4 Pages Gr 1 This standard specifies the maximum external leakage rates which are acceptable for equipment used for welding.120.Part 1: General Measurement 4 Pages Principles Gr 1 This standard establishes general principles for the measurement of Performance Parameters under static or steady-state conditions.Determination of the Long-Term Hydrostatic 24 Pages Strength of Thermoplastics Materials in Pine form by Extrapolation Gr 3 This standard describes a method for estimating the long-term hydrostatic strength of thermoplastics materials by statistical extrapolation.Measurement Techniques .160 Published by GSA in 2007 Solar Energy .10 56 Pages Gr 7 Provides guidelines beyond the requirements given in ISO 9001 in order to consider both the effectiveness and efficiency of a Quality Management system.160. __________________________________________________________________________________________ GS ISO 9059 : 1990Ψ 27.20 Published by GSA in 2006 Plastics Piping and Ducting Systems .160 Published by GSA in 2007 Solar Energy .120. and consequently the potential for improvement of the performance of an organization.040. __________________________________________________________________________________________ GS ISO 9110-1 : 1990Ψ 23.Specification of Instruments for Measuring Hemispherical Solar and 11 Pages Direct Solar Radiation Gr 2 This standard establishes a classification and specification of instruments for the measurement of hemispherical solar and direct solar radiation integrated over the spectral range __________________________________________________________________________________________ GS ISO 9080 : 2003Ψ 23. __________________________________________________________________________________________ GS ISO 9090 : 1989Ψ Published by GSA in 2006 Gas Tightness of Equipment for Gas Welding and Allied Processes 25.Requirements 03. __________________________________________________________________________________________ 248 .01 Published by GSA in 2006 Hydraulic Fluid Power .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 9001 : 2008Ψ Published by GSA in 2010 Quality Management Systems . including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.Calibration of Field Pyrheliometers by Comparison to a Reference Pyrheliometer Gr 1 7 Pages This standard describes the calibration of field pyrheliometers using reference pyrheliometer and sets out the calibration procedures and the calibration hierarchy for the transfer of the calibration __________________________________________________________________________________________ GS ISO 9060 : 1990Ψ 27. cutting and allied processes.Guidelines for Performance Improvements 03.100. 040.Measurement Techniques .100. on the road vehicles.140 Published by GSA in 2006 Technical Drawings .180 Published by GSA in 2006 Adhesives .20 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 ________________________________________________________________________________________ GS ISO 9110-2 : 1990Ψ 23.100. 21. the correct type of fluid to be used for.060 1 Page Gr 1 This standard specifies a range of fineness of precious metal alloys (excluding solders) recommended for use in the field of jewellery.Seals for Dynamic Application . __________________________________________________________________________________________ GS ISO 9128 : 2006Ψ Published by GSA in 2007 Road Vehicles . __________________________________________________________________________________________ GS ISO 9222-1 : 1989Ψ 01. __________________________________________________________________________________________ GS ISO 9142 : 2003Ψ 83.01 Published by GSA in 2006 Hydraulic Fluid Power .20 .Guide to the Selection of Standard Laboratory Ageing Conditions for Testing 24 Pages Bonded Joints Gr 3 This standard describes laboratory ageing conditions under which adhesive joints may be exposed to various environmental influences — climatic or chemical — for the purpose of assessing the effects of such influences on certain properties.140. __________________________________________________________________________________________ GS ISO 9202 : 1991Ψ Published by GSA in 2006 Jewellery .Part 1 : General Simplified Representation 2 Pages Gr 1 This standard specifies the general simplified representation for seals. 43.40 5 Pages Gr 1 This standard specifies the graphical symbols and colours used to identify.Seals for Dynamic Application .20 4 Pages Gr 1 This standard gives guidance on methods to be used to describe green coffee for sale and purchase. __________________________________________________________________________________________ 249 .100.01 Published by GSA in 2006 Technical Drawings .Graphical Sysbols to Designate Brake Fluid Types 01.Fineness of Precious Metal Alloys 39.Part 2 : Measurement of Average Steady-State Pressure in a Closed Conduit 6 Pages Gr 1 This standard establishes procedures for measuring the average steady-state pressure in a hydraulic fluid power conduit. and is based on the terms of contract used in coffee trade. for example in assembly drawings.Part 2 : Detailed Simplified Representation 12 Pages Gr 2 This standard specifies a detailed simplified representation for various seals. This representation should be used in cases where it is not necessary to show the exact shape and details of the seals. __________________________________________________________________________________________ GS ISO 9116 : 2004Ψ Published by GSA in 2007 Green Coffee . __________________________________________________________________________________________ GS ISO 9222-2 : 1989Ψ 23.Guidelines on Methods of Specification 67.080. Thermotolerant Coliform Organisms and Presumptive Escherichia coli Part 2 : Multiple Tube (Most 9 Pages Probable Number) method Gr 1 This standard specifies a method for the detection and enumeration in water of coliform organisms.180 .dip aluminium alloy coating process __________________________________________________________________________________________ GS ISO 9442 : 1988Ψ 77.Hot-Rolled Ribbed and Grooved Flats for Spring Leaves .30 2 Pages Gr 1 This standard specifies dimensions and tolerance of cooling tubes for resistance spot welding equipment __________________________________________________________________________________________ GS ISO 9364 : 2006Ψ 77. Drawing and 16 Pages Structural Qualities Gr 2 This standard applies to the characteristics of steel sheet of commercial. which are preferably used for rail vehicle construction. __________________________________________________________________________________________ GS ISO 9313 : 1989Ψ Published by GSA in 2006 Resistance spot welding equipment . drawing and structural qualities coated by a continuous hot .Tolerantes and 3 Pages Dimensions Gr 1 This standard applies to hot-rolled ribbed and grooved spring steel with the dimensions stated in table 1.Part 1: Classification. which need to be insulated from each other. 35. according to their active fluxing ingredients. of the steel grades listed in clause 4.160.Cooling Tubes 25.20 Published by GSA in 2006 Steel .Part 1: General Introduction 7 Pages Gr 1 This standard introduces the multipart standard on ergonomic requirements for the use of visual display terminals for office tasks __________________________________________________________________________________________ GS ISO 9308-2 : 1990Ψ 07.Detection and Enumeration of Coliform Organisms.140.100.Coated Steel Sheet of Commercial.30 Published by GSA in 2006 Resistance Welding Equipment .50 Published by GSA in 2007 Continuous Hot .160.Insulated Pins for use in Electrode Back-Ups 2 Pages Gr 1 This standard specifies the requirements for insulated pins used to pin parts in the secondary circuit of resistance welding equipment.50 Published by GSA in 2006 Soft Soldering Fluxes .180 Published by GSA in 2006 Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) . or other live equipment. thermotolerant coliform organism and presumptive __________________________________________________________________________________________ GS ISO 9312 : 1990Ψ 25. __________________________________________________________________________________________ GS ISO 9454-1 : 1990Ψ 25. Labelling and Packaging 5 Pages Gr 1 This standard specifies a coding system for the classification of fluxes intended for use with soft solders. __________________________________________________________________________________________ 250 . together with requirements for labelling and packaging.160.Dip Aluminium / Zinc .Classification and Requirements .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 9241-1 : 1997Ψ 13.140.20 Published by GSA in 2008 Water Quality. 10 Published by GSA in 2006 Belt Drives .01 Published by GSA in 2006 Fruits.20 Published by GSA in 2007 Solar Heating .160 .50 Published by GSA in 2007 Solar Energy .Domestic Water Heating Systems .140.20 Published by GSA in 2007 Solar Heating .140. vegetables and derived products. 91. Vegetables and Derived Products . under benchmark conditions __________________________________________________________________________________________ GS ISO 9459-2 : 1995Ψ 27.Part 2 : Outdoor Test Methods for 61 Pages System Performance Characterization and Yearly Performance Prediction of Solar only Systems Gr 7 This standard establishes test procedures for characterizing the performance of solar domestic water heating systems operated without auxiliary boosting. Cutting and Allied Processes 25.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 9459-1 : 1993Ψ 27.160 .Electrical Conductivity of Antistatic Endless Synchronous Belts 4 Pages Characteristics and Test Method Gr 1 This standard specifies the maximum electrical resistance of antistatic endless synchronous belts and a corresponding laboratory method of measurement.Vocabulary 01. __________________________________________________________________________________________ 251 . cutting and allied processes. __________________________________________________________________________________________ GS ISO 9539 : 1988Ψ Published by GSA in 2006 Materials for Equipment used in Gas Welding. and for predicting annual performance in any given climatic and operating conditions __________________________________________________________________________________________ GS ISO 9488 : 1999Ψ Published by GSA in 2007 Solar Energy . 83. 27160 47 Pages Gr 5 This standard defines basic terms relating to solar energy __________________________________________________________________________________________ GS ISO 9526 : 1990Ψ 67.140.30 2 Pages Gr 1 This standard specifies the general and special requirements on materials used for the construction of equipment used in gas welding.27 . 91.Determination of Iron Content by Flame Atomic Absorption Spectrometry 3 Pages Gr 1 This standard specifies a flame atomic absorption spectrometric method for the determination of the iron content of fruits. __________________________________________________________________________________________ GS ISO 9553 : 1997Ψ 27.160 .methods of Testing Preformed Rubber Seals and Sealing Compounds used in Collectors 9 Pages Gr 1 This standard gives requirements for the classification and testing of rubbers used to seal solar energy collectors in order to aid selection for specific applications __________________________________________________________________________________________ GS ISO 9563 : 1990Ψ 21.040.Domestic Water Heating Systems Part 1 : Performance Rating Procedure using Indoor Test Methods 28 Pages Gr 3 This standard establishes a uniform indoor test method for rating solar domestic water heating systems for thermal performance.080.160.220. 91. __________________________________________________________________________________________ 252 . It also provide test methods and calculation procedures for determining the steady-state and quasi-steady-state thermal performance of solar collectors.Test Methods .10 3 Pages Gr 1 This standard specifies a method for the determination of the water extract from tea __________________________________________________________________________________________ GS ISO 9806-1 : 1994Ψ 27.Uniformity of Belts .00.140.160.10 26 Pages Gr 3 Specifies requirements.Determination of Water Extract 67.Test Method for Determination of Centre Distance 2 Pages Variation Gr 1 This standard specifies a test method for determining the centre distance variation of V-belt drives as a criterion for the uniformity of V-belts. test conditions.140.160 48 Pages Gr 5 This standard establishes test methods for determining the ability of a solar collector to resist the influences of degrading agents.160.Determination of Tannin Content 3 Pages Gr 1 This standard specifies a universal method for the determination of tannin content in sorghum grains __________________________________________________________________________________________ GS ISO 9768 : 1994Ψ Published by GSA in 2007 Tea .10 Published by GSA in 2006 V-belts . ranges of approval. It contains methods for __________________________________________________________________________________________ GS ISO 9806-2 : 1995Ψ Published by GSA in 2006 Test Methods for Solar Collectors Part 2 : Qualification Test Procedures 27. __________________________________________________________________________________________ GS ISO 9608 : 1994Ψ 21.040 6 Pages Gr 1 This standard specifies the methods for determining setting time and soundness of cements. __________________________________________________________________________________________ GS ISO 9606-1 : 1994Ψ Published by GSA in 2007 Approval Testing of Welders . acceptance requirements and certification for the approval testing of welder performance for the welding of steels.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 9597 : 1989Ψ Published by GSA in 2005 Cement .060 Published by GSA in 2008 Sorghum . __________________________________________________________________________________________ GS ISO 9648 : 1988Ψ 67.Determination of Setting Time and Soundness 87.220.20 Published by GSA in 2006 Test Methods for Solar Collectors Part 1 : Thermal Performance of Glazed Liquid 60 Pages Heating Collectors including Pressure Drop Gr 6 It establishes methods for determining the thermal performance of glazed liquid heating solar collectors.Fusion Welding Part 1: Steels 25. Part 2 : Stud Ends with Elastomeric Sealing 8 Pages (Type E) Gr 1 This standard specifies dimensions.Elastometric Materials for Absorbers. __________________________________________________________________________________________ GS ISO 9974-2 : 1996Ψ 23.160 Published by GSA in 2007 Solar Energy . components and materials where the direct and hemispherical irradiance component is desired.5 Gr 2 This standard provides an appropriate standard spectral irradiance distribution to be used in determining relative performance of solar thermal photovoltaic. __________________________________________________________________________________________ 253 . __________________________________________________________________________________________ GS ISO 9846 : 1993Ψ Published by GSA in 2007 Solar Energy . and other systems.160 Published by GSA in 2006 Test Methods for Solar Collectors Part 3 : Thermal Performance of Unglazed Liquid Heating Collectors (Sensible Heat Transfer Only) including Pressure Drop 36 Pages Gr 4 This standard establishes methods for determining the thermal performance of unglazed liquid heating solar collectors. Connecting Pipes and 3 Pages Fittings . performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends withIS0 261 threads and the elastomeric sealing that isused with them. __________________________________________________________________________________________ GS ISO 9808 : 1990Ψ 27.Dichloromethane Resistance at 4 Pages Specified Temperature (DCMT) .Reference Solar Spectral Irradiance at the Ground at Different 14 Pages Receiving Conditions Part 1 : Direct Normal and Hemispherical Solar Irradiance for Air Mass 1.100.Calibration of Field Pyranometers by Comparison to a Reference Pyranometer 15 Pages Gr 2 This standard specifies two preferred methods for the calibration of field pyranometers using reference pyranometers __________________________________________________________________________________________ GS ISO 9852 : 2007Ψ 23.160 Published by GSA in 2007 Solar Energy .Calibration of a Pyranometer using a pyrheliometer 27.Ports and Stud Ends with IS0 261Threads with Elastomeric or Metal-to-Metal Sealing .30 Published by GSA in 2006 Connections for General use and Fluid Power .160 20 Pages Gr 2 This standard promote the uniform application of reliable methods to calibrate pyranometers __________________________________________________________________________________________ GS ISO 9847 : 1992Ψ 27.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 9806-3 : 1995Ψ 27.20 Published by GSA in 2006 Unplasticized Poly (Vinyl Chloride) (PVC-U) Pipes . connecting piping and fittings for use in solar water heaters. __________________________________________________________________________________________ GS ISO 9845-1 : 1992Ψ 27.040.Teset Method Gr 1 This standard specifies a method for determining the resistance of unplasticized PVC pipes to dichloromethane at a specified temperature (DCMT).160 Published by GSA in 2007 Solar Water Heaters .Method of Assessment Gr 1 This standards specifies a means of assessing elastometric materials for use in the manufacture of absorbers. acceptance. It is application to the support of products from concept to disposal __________________________________________________________________________________________ 254 . __________________________________________________________________________________________ GS ISO 10005 : 2005Ψ Published by GSA in 2005 Quality Management Systems . review. light-duty (L series) and extra-light-duty(LL series) stud ends with IS0 261 threads and meta __________________________________________________________________________________________ GS ISO 9975 : 1990Ψ 73. together with the corresponding endless V-ribbed belts of PK profile which are used predominantly for automotive accessory drive applications.100.220.Specifications 9 Pages Gr 1 This standard specifies round nonalloy steel drawn wires to be used in the manufacture of locked coil mine winding ropes. application and revision of quality plans.020.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 23.65 Published by GSA in 2006 Round Non-Alloy Steel Wires for Locked Coil Mine Winding Ropes .100.Guidelines for Quality Management in Projects 32 Pages Gr 4 Gives guidelines on the application of quality management in projects. __________________________________________________________________________________________ GS ISO 9980 : 1990Ψ 21. 77.060.Guidelines for Configuration Management 03.40 . performance requirements and test procedures for heavy-duty (S series).Guidelines for Quality Plans 03.30 GS ISO 9974-3 : 1996Ψ Published by GSA in 2006 Connections for General use and Fluid Power .10 Published by GSA in 2005 Quality Management Systems .Part 3 : Stud Ends with Metal-to-Metal 7 Pages Sealing (Type B) Gr 1 This standard specifies dimensions.10 10 Pages Gr 1 Gives guidance on the use of configuration management within an organization. __________________________________________________________________________________________ GS ISO 9981 : 1998Ψ 43.020.140.Grooved Pulleys for V-Belts (System Based on Effective Width) 8 Pages Geometrical Inspection of Grooves Gr 1 This standard specifies the methods of checking the regularity of the grooves and pulleys for V-belts specified in the system based on effective width.10 23 Pages Gr 3 This standard provides guidelines for the development.Ports and Stud Ends with IS0 261 Threads with Elastomeric or Metal-to-Metal Sealing .020.10 Published by GSA in 2006 Belt Drives — Pulleys and V-Ribbed Belts for the Automotive Industry — PK Profile: Dimensions 8 Pages Gr 1 This standard specifies the principal dimensional characteristics of V-ribbed pulley groove profiles. __________________________________________________________________________________________ GS ISO 10007 : 2003Ψ Published by GSA in 2005 Quality Management Systems . __________________________________________________________________________________________ GS ISO 10006 : 2003Ψ 03.10 Published by GSA in 2006 Belt Drives . Final Examination and Acceptance Criteria 4 Pages Gr 1 This standard specifies functional tests for a final examination and the acceptance criteria for double acting pneumatic cylinders with a single-rod used in pneumatic fluid power systems.020.20 Published by GSA in 2007 Coffee . __________________________________________________________________________________________ GS ISO 10110-11 : 1996Ψ 37. maintenance.Preparation of Drawings for Optical Elements and Systems Part 10 . 17.020.Cylinders .Table Representing Data of Optical Elements and Cemented Assemblies 11 Pages Gr 2 This standard specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.Non-toleranced data 2 Pages Gr 1 This standard specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. __________________________________________________________________________________________ 255 .20 3 Pages Gr 1 This standard specifies acceptance and function test for hydraulic fluid power cylinders __________________________________________________________________________________________ GS ISO 10110-10 : 2004Ψ 01.100.Determination of Caffeine Content .Cylinders .100. and improvement of strategies and systems for training that affect the quality of the products supplied by an organization __________________________________________________________________________________________ GS ISO 10095 : 1992Ψ 67. __________________________________________________________________________________________ GS ISO 10100 : 2001Ψ Published by GSA in 2006 Hydraulic Fluid Power . implementation. 37.Preparation of Drawings for Optical Elements and Systems Part 11 . __________________________________________________________________________________________ GS ISO 10015 : 1999Ψ 03. It also specifies the permissible deviations and material imperfections when these are not explicitly indicated.140.Method using High-Performance Liquid Chromatography Gr 1 6 Pages This standard specifies a method for the determination of caffeine content by high performance liquid chromatography (HPLC) of regular and decaffeinated green and roasted coffee beans and of regular and decaffeinated coffee extract powder __________________________________________________________________________________________ GS ISO 10099 : 2001Ψ 23.10 .10 Published by GSA in 2005 Quality Management .100. permissible deviations and material imperfections of optical elements and cemented assemblies in tabular form.10 Published by GSA in 2006 Optics and Optical Instruments .20 Published by GSA in 2007 Optics and Optical Instruments .020..Acceptance Test 23.Guidelines for Training 14 Pages Gr 2 Guidelines cover the development.100. It specifies a format for indicating the dimensions.020 Published by GSA in 2005 Measurement Management Systems Requirements for Measurement Processes and Measuring Equipment 19 Pages Gr 2 Specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation or measuring equipment used to support and demonstrate compliance with metrological requirements.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10012 : 2003Ψ 03.20 Published by GSA in 2006 Pneumatic Fluid Power . 020.Preparation of Drawings for Optical Elements and 6 Pages Systems Part 9 . 23. __________________________________________________________________________________________ GS ISO 10297 : 2006Ψ 23.Surface Treatment and Coating Gr 1 This standard specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.15 Published by GSA in 2008 Certification scheme for steel bars and Wires for the Reinforcement of Concrete Structures 9 Pages Gr 1 This standard specifies rules for the certification scheme for continuous production of steel bars and wires for ordinary reinforcement of concrete structures in order to verify the conformity with requirements specified in product standards . __________________________________________________________________________________________ GS ISO 10303-203 : 1994Ψ 25.040. production and marking requirements. 37.40 Published by GSA in 2007 Transportable Gas Cylinders — Cylinder Valves — Specification and Type Testing 27 Pages Gr 3 This standard specifies valve design. It specifies rules indicating the treatments and coatings applied to optical surfaces for functional and/or protective purposes.100. It specifies rules for indicating centering tolerances for optical elements.10 GS ISO 10110-6 : 1996Ψ Published by GSA in 2006 Optics and Optical Instruments . and assemblies.Preparation of Drawings for Optical Elements and Systems Part 6 .10 Published by GSA in 2006 Optics and Optical Instruments . __________________________________________________________________________________________ GS ISO 10303-21 : 2002Ψ 25.060. sub-assemblies.020.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 37.020.30 .140. Exchange is used as a scoping consideration to narrow the scope to only those data which are exchanged as part of the 3D product definition. __________________________________________________________________________________________ 256 .040. __________________________________________________________________________________________ GS ISO 10144 : 1991Ψ 77.Product Data Representation and Exchange Part 203 .Configuration controlled 3D Designs of 528 Pages Mechanical Parts and Assemblies This standard specifies the integrated resources necessary for the scope and information requirements for the exchange between application systems of configuration-controlled 3D designs of mechanical parts and assemblies.40 Published by GSA in 2006 Industrial Automation Systems and Integration .Implementation Methods .40 Published by GSA in 2006 Industrial Automation Systems and Integration . Configuration in this context only includes data and processes that control the 3D product design data. 37..100. The exchange format is suitable for the transfer of product data among computer systems.Application Protocol .Clear text Encoding of the Exchange 72 Pages Structure Gr 8 This standard specifies an exchange structure format using a clear text encoding of product data for which the conceptual model is specified in the EXPRESS language (ISO 10303-11). liquefied or dissolved gases. and type test methods for valves intended to be fitted to gas cylinders which convey compressed. __________________________________________________________________________________________ GS ISO 10110-9 : 1996Ψ 37.Product Data Representation and Exchange Part 21 .Centering Tolerances 10 Pages Gr 1 This standard specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. 180.Product Data Representation and Exchange Part 44 . __________________________________________________________________________________________ GS ISO 10303-43 : 2000Ψ 25.Product Data Representation and Exchange Part 42 .180.40 Published by GSA in 2006 Industrial Automation Systems and Integration .Representation Structures 40 Pages Gr 5 This standard specifies the resource constructs that group elements of product data into collections in order to describe aspects of products.Integrated Generic Systems Resource .Integrated Generic Resource : Product Structure Configuration 51 Pages Gr 6 This standard specifies the resource constructs to manage the structure and configuration of a product during its life cycle. 22 The standard specifies the required inspection for each level of inspection and procedures for the inspection and testing of used drill stem elements.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ GS ISO 10407-2 : 2008Ψ 75.040.Field Testing of Drilling Fluids 91 Pages Part 1: Water .Specification and Conditions of Delivery 77. 10 The standard provides standard procedures for determining the following characteristics of water-based drilling fluids. this Standard also specifies specializations of the concepts of representation where the elements of representation are geometric.Additionally.Field Testing of Drilling Fluids 72 Pages Part 2: Oil .40 Published by GSA in 2006 Industrial Automation Systems and Integration .100 3 Pages Gr 1 This standard specifies requirements and conditions of delivery for ferroboron usually supplied for steelmaking and foundry use. __________________________________________________________________________________________ GS ISO 10386 : 1994Ψ Published by GSA in 2006 Ferroboron .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10303-42 : 2003Ψ 25.40 Published by GSA in 2006 Industrial Automation Systems and Integration .Rotary Drilling Equipment Part 2: Inspection and Classification of used drill Stem Elements 213 Pages Gr.Based Fluid Gr. This Standard is applicable to the description of properties of products. __________________________________________________________________________________________ GS ISO 10303-44 : 2000Ψ 25. __________________________________________________________________________________________ GS ISO 10414-2 : 2002Ψ 75. __________________________________________________________________________________________ 257 .040.Product Data Representation and Exchange Part 43 : Integrated Generic Resource .Geometric and Topological 350 Pages Representation This standard specifies the resource constructs for the explicit geometric and topological representation of the shape of a product.8 The standard provides standard procedures for determining the following characteristics of oil-based drilling fluids.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . The geometry in clause 4 and the topology in clause 5 are available for use independently and are also extensively used by the various forms of geometric shape model in clause 6. The scope is determined by the requirements for the explicit representation of an ideal product model.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .180. __________________________________________________________________________________________ GS ISO 10414-1 : 2008Ψ 75. tolerances and implicit forms of representation in terms of features are out of scope.040.Based Fluids Gr. __________________________________________________________________________________________ 258 . handling. storing. inspection.Basic Surface Process Safety Systems 107 Pages Gr. chemical and performance properties __________________________________________________________________________________________ GS ISO 10417 : 2004Ψ 75. including dimensional requirements on threads and thread gauges.Subsurface Safety Valve Systems .Laboratory Testing 75. dimensional and functional interchangeability. marking. purchasing. gauge specifications.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ GS ISO 10426-1 : 2009Ψ 75. test.Offshore Production Installations . materials. 91.180. 10 This standard specifies requirements on rotary shouldered connections for use in petroleum and natural gas industries.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . shipment. 4 This standard establishes requirements and provides guidelines for configuration.100. Gr.Cements and Materials for Well Cementing38 pages Part 1: Specification. repair and remanufacture of wellhead and charismas tree equipment for use in the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 10424-1 : 2004Ψ 75. 11 The standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical.Design.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .10 Published by GSA in 2011 Petroleum and Natural Gas Industries . 23 The standard specifies requirements and gives recommendations for the performance.Drilling and Production Equipment .020 . 4 This standard specifies requirements and gives recommendations for six classes of well cements. testing. operation and documentation of subsurface safety valve systems __________________________________________________________________________________________ GS ISO 10418 : 2003Ψ 75. Operation and Redress Gr. including their chemical and physical requirements and procedures for physical testing.100.Rotary Drilling Equipment 66 Pages Part 1: Rotary Drill Stem Elements Gr. functional requirements and guidelines for techniques for the analysis. 31 Pages Installation.180.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10416 : 2008Ψ Published by GSA in 2011 Petroleum and Natural Gas Industries . 11 This standard provides objectives.Rotary Drilling Equipment Part 2: Threading and Gauging of Rotary Shouldered Thread Connections. stipulations on gauging practice.Drilling Fluids . design.180.10 109 Pages Gr. 75.180.7 The standard specifies requirements for drill stem elements __________________________________________________________________________________________ GS ISO 10424-2 : 2007Ψ 75. 99 Pages Gr.Wellhead and Christmas Tree Equipment 226 Pages Gr. installation. design and testing of surface process safety systems for offshore installations for the recovery of hydrocarbon resources __________________________________________________________________________________________ GS ISO 10423 : 2009Ψ 75.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . as well as instruments and methods for inspection of thread connections. welding.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . Equipment for Well Cementing Part 1: Casing Bow. Gr. 91.020. __________________________________________________________________________________________ GS ISO 10426-3 : 2003Ψ 75.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .91. 18 This standard specifies requirements and gives recommendations for the testing of cement slurries and related materials under simulated well conditions.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .100. test procedures and marking requirements for casing bow-spring centralizers for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 10427-2 : 2004Ψ 75.020 .Cements and Materials for Well Cementing13 pages Part 4: Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure.Spring Centralizers 10 Pages Gr. 91.100.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . 2 This standard provides the methods for the testing of well cement formulations to determine the dimension changes during the curing process (cement hydration) at atmospheric pressure. __________________________________________________________________________________________ GS ISO 10426-6 : 2008Ψ 75.180. 2 This standard defines the methods for the generation and testing of foamed cement slurries and their corresponding unfoamed bass cement slurries at atmospheric pressure.Cement and Materials for Well Cementing13 pages Part 3:Testing of Deep Water Well Cement Formulation. 91. __________________________________________________________________________________________ GS ISO 10427-1 : 2001Ψ 75. __________________________________________________________________________________________ GS ISO 10426-5 : 2004Ψ 75. Gr. 1 This standard provides minimum performance requirements.100.10 Published by GSA in 2011 Petroleum and Naturals Gas Industries .180. 171 Pages Gr. in deviated and dogleg holes in wells for the petroleum and natural gas industries.100.Cements and Materials for Well CementingPart 2: Testing of Well Cements.10 Published by GSA in 2011 Petroleum and Natural Gas Industries-Cements and Materials for Well Cement9 Pages Part 6: Methods for Determining the Static Gel Strength of Cement Formulations Gr.020 . 91.100.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ GS ISO 10426-4 : 2004Ψ 75.020 . based on centralizer performance and desired standoff.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ 259 . 2 This standard provides calculations for determining centralizer spacing. Gr.020. 2 This standard provides procedures for testing well cements and cement blends for use in the petroleum and natural gas industries in a deep-water environment.Cements and Materials for Well CementingPart 5: Determination of Shrinkage and Expansion of Well Cement Formulations at 13 pages Atmospheric Pressure.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10426-2 : 2003Ψ 75.Equipment for Well Cementing14 Pages Part 2: Centralizer Placement and Stop-Collar Testing Gr. 1 This standard specifies requirement and provides test methods for the determination of static gel strength (SGS) of cement slurries and related materials under simulated well conditions. 200 Published by GSA in 2011 Petroleum. Shaft-Sealing and 61 Pages Control-Oil Systems and Auxiliaries Part 1: General Requirements Gr. Petrochemical and Natural Gas Industries .180. oil-type shaft-sealing systems. dry-gas face-type shaft-sealing systems and control-oil systems for general-or special-purpose applications __________________________________________________________________________________________ GS ISO 10438-2 : 2007Ψ 75. Shaft-Sealing and 65 Pages Control-Oil Systems and Auxiliaries Part 2: Special . inspection.180. materials.180. Petrochemical and Natural Gas Industries .20 Published by GSA in 2011 Petroleum.7 This standard specifies general requirements for lubrication systems.20 Published by GSA in 2011 Petroleum.20 Published by GSA in 2011 Petroleum. Shaft-Sealing and 30 Pages Control-Oil Systems and Auxiliaries Part 4: Self-Acting Gas Seal Support Systems Gr.Steam Turbines . __________________________________________________________________________________________ GS ISO 10438-1 : 2007Ψ 75. fabrication. testing and preparation for shipment of steam turbines for special-purpose applications.8 This standard provides the minimum acceptable requirements for subsurface safety valves __________________________________________________________________________________________ GS ISO 10437 : 2003Ψ 75. Petrochemical and Natural Gas Industries .Lubrication.Lubrication. 3 The standard specifies requirements for support systems for self-acting gas seals __________________________________________________________________________________________ 260 .Purpose Oil Systems Gr. 4 This standard specifies requirements for oil systems for general-purpose applications __________________________________________________________________________________________ GS ISO 10438-4 : 2007Ψ 75.180. Shaft-Sealing and Control-Oil Systems and Auxiliaries 37 Pages Part 3: General .20 Published by GSA in 2011 Petroleum.Lubrication.180.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10427-3 : 2003Ψ 75.Special-Purpose Applications 112 Pages Gr.180. Petrochemical and Natural Gas Industries .10 Published by GSA in 2011 Petroleum and Natural Gas Industries .12 This standard specifies requirements and gives recommendations for the design.Purpose Oil Systems Gr.10 Published by GSA in 2011 Petroleum and Natural Gas Industries-Equipment for Well CementingPart 3: Performance Testing of Cementing Float 11 Pages Equipment Gr.Down hole Equipment. 7 This standard specifies requirements for oil systems for special-purpose applications __________________________________________________________________________________________ GS ISO 10438-3 : 2007Ψ 75.Subsurface Safety Valve Equipment 77 Pages Gr.Lubrication. __________________________________________________________________________________________ GS ISO 10432 : 2004Ψ 75. 2 This standard describes testing practices to evaluate the performance of cementing float equipment for the petroleum and natural gas industries. Petrochemical and Natural Gas Industries . in accordance with the requirements of the order.30 .Determination of the Composition of Glucose Syrups. Petrochemical and Natural Gas Industries . and after-harvest processing (wet or dry).Performance Liquid Chromatography Gr 1 This standard describes a high.180. It also applies to cylinders protected by a system to prevent external corrosion and designed __________________________________________________________________________________________ GS ISO 10470 : 2004Ψ Published by GSA in 2007 Green Coffee — Defect Reference Chart 67. glucose syrups.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10441 : 2007Ψ 75. whatever its species.200 Published by GSA in 2007 Gas Cylinders — Refillable Welded Steel Cylinders for Liquefied Petroleum Gas (LPG) 15 Pages — Periodic Inspection and Testing Gr 2 This standard specifies the intervals and inspection and testing procedures for the periodic inspection of refillable welded steel dedicated LPG cylinders of water capacity from 0.140.Reduced Steel Wire for the Reinforcement of Concrete and the Manufacture of Welded Fabric 15 Pages Gr 2 This standard specifies technical requirements for cold-reduced steel wire designed for the reinforcement of concrete or for use in welded fabric __________________________________________________________________________________________ 261 .020. Fructose 7 Pages Syrups and Hydrogenated Glucose Syrups.140. 6 The standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum and natural gas industries. hydrogenated glucose syrups __________________________________________________________________________________________ GS ISO 10540-2 : 2003Ψ 67.200.01 Published by GSA in 2008 Cold.Method using High.Purpose Applications 56 Pages Gr.performance liquid chromatographic (HPLC) method for measuring the composition of dextrose solutions. fructose.Flexible Couplings for Mechanical Power Transmission . variety.10 Published by GSA in 2006 Animal and Vegetable Fats and Oils .Inspection Documents 77.Special . __________________________________________________________________________________________ GS ISO 10504 : 1998Ψ 67. for the delivery of iron and steel products. __________________________________________________________________________________________ GS ISO 10544 : 1992Ψ 77.Determination of Phosphorous Content Part 2 8 Pages Method Using Graphite Furnace Atomic Absorption Spectrometry Gr 1 This standard specifies a rapid method for the determination of trace amounts of phosphorus in crude or refined animal and vegetable fats and oils.20 Published by GSA in 2007 Starch Derivatives.20 15 Pages Gr 2 This standard provides a chart which lists the main five different categories of defects which are considered to be potentially present in green coffee as marketed throughout the world.51 up to and including 1501. 75.140. __________________________________________________________________________________________ GS ISO 10464 : 2004Ψ 23.01 6 Pages Gr 1 This standard defines the different types of inspection documents supplied to the purchaser.20 Published by GSA in 2011 Petroleum.containing syrups. __________________________________________________________________________________________ GS ISO 10474 : 1991Ψ Published by GSA in 2008 Steel and Steel Products .180. 220.Integrated Transformers for Welding Guns 25.10 Published by GSA in 2005 Large Cardamom ( Amomum Subulatum Roxb.060 3 Pages Gr 1 This standard specifies the coating thickness requirements and the gold fineness of the coating.) as Capsules and Seeds .Specification 4 Pages Gr 1 Specifies requirements for large cardamom as capsules and seed ( Amomum subulatum Roxb.220. __________________________________________________________________________________________ GS ISO 10691 : 2004Ψ 23.Design Rules and Type 4 Pages Testing Gr 1 This standard specifies design rules and type testing for restrained joint systems to be used on ductile iron pipelines complying with IS0 2531 and IS0 7186.160.020.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10621 : 1997Ψ Published by GSA in 2005 Dehydrated Green Pepper ( Piper Nigrum L) . For these transformers it supplements the requirements given in IS0 5826 which remain applicable when not amended in this Standard. It also defines current terms concerning gold alloy coatings __________________________________________________________________________________________ GS ISO 10767-1 : 1996Ψ 23. in order to determine their mechanical properties and leak tightness.Specification 67. source impedance and pressure ripple levels generated by positive-displacement hydraulic pumps.) __________________________________________________________________________________________ GS ISO 10656 : 1996Ψ Published by GSA in 2006 Electric Resistance Welding .01 Published by GSA in 2006 Restrained Joint Systems for Ductile Iron Pipelines Part 1.Precision Method for Pumps 22 Pages Gr 3 This standard specifies a procedure for the determination of a rating of the source flow ripple.40 8 Pages Gr 1 This standard specifies transformers for electric resistance welding used in welding guns with integrated transformers (robot guns).30 Published by GSA in 2007 Gas Cylinders — Refillable Welded Steel Cylinders for Liquefied Petroleum Gas (LPG) — Procedures for checking before.20 Published by GSA in 2006 Hydraulic Fluid Power . __________________________________________________________________________________________ 262 . __________________________________________________________________________________________ GS ISO 10804-1 : 1996Ψ 23. during and after filling.10 4 Pages Gr 1 Specifies the requirements for dehydrated green pepper (Pipper nigrum L ) __________________________________________________________________________________________ GS ISO 10622 : 1997Ψ 67. during and after Filling 7 Pages Gr 1 This standard specifies the procedures to be adopted when checking transportable refillable welded steel LPG cylinders before. __________________________________________________________________________________________ GS ISO 10713 : 1992Ψ Published by GSA in 2006 Jewellery .Gold Alloy Coatings 39.Determination of Pressure Ripple Levels Generated in Systems and Components Part 1.040.100. which can be opaque.40 Published by GSA in 2006 Mechanical Vibrations .Determination of Shear Behaviour of Structural Adhesives Part 2 . The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work. __________________________________________________________________________________________ GS ISO 10823 : 2004Ψ Published by GSA in 2006 Guidelines for the Selection of Roller Chain Drives 21.Specification Gr 1 5 Pages This standard specifies definitions. translucent.180 Published by GSA in 2006 Adhesives . __________________________________________________________________________________________ 263 . in finite element analysis methods.100 .Susceptibility and Sensitivity of Machines to Unbalance 11 Pages Gr 1 This standard defines methods for determining machine vibration sensitivity to unbalance and provides evaluation guidelines as function of the proximity of relevant resonant speeds to the service speed. __________________________________________________________________________________________ GS ISO 10920 : 1997Ψ 23. cloudy or transparent in nature.240 Published by GSA in 2008 Sensory Analysis . for the connection of valves to medical and industrial gas cylinders.Determination of Shear Behaviour of Structural Adhesives Part 1 .120. 9.30 22 Pages Gr 3 This standard gives guidelines for the selection of chain drives. The selection procedures and the chain ratings it describes provide for roller chain drives operating under specified conditions.Tensile 14 Pages Test Method using Thick Adherends Gr 2 This standard specifies a test method for determining the shear behaviour of an adhesive in a single lap joint bonded assembly when subjected to a tensile force. 77 060 Published by GSA in 2007 Petroleum Products and Lubricants . semisolid.g. with a life expectancy of approximately 15 000 h.1. dimensions and tolerances of a taper screw thread of nominal diameter 25.Prevention Characteristics of Lubricating Greases 7 Pages Gr 1 This standard specifies a method for the determination of the rust .8 mm (designated 25E). as defined in 9.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 10814 : 1996Ψ 21.30 Published by GSA in 2007 Gas Cylinders .2 and in Clause 10. as well as matt or glossy. __________________________________________________________________________________________ GS ISO 11007 : 1997Ψ 75.prevention characteristics of lubricating grease in the presence of an aqueous test fluid __________________________________________________________________________________________ GS ISO 11037 : 1999Ψ 67. __________________________________________________________________________________________ GS ISO 11003-1 : 2001Ψ 83.180 Published by GSA in 2006 Adhesives .Determination of Rust . __________________________________________________________________________________________ GS ISO 11003-2 : 2001Ψ 83. composed of a roller chain and spockeds conformant with ISO 606.Torsion Test Method using Butt-bonded Hollow Cylinders 9 Pages Gr 1 This standard specifies a shear test for the characterization of adhesives in a bond.020. The given procedures are applicable to solid. e.220. for industrial applications.General Guidance and Test Method for Assessment of the Colour of Foods Gr 2 11 Pages This standard gives general guidance and specifies a method for the sensory evaluation of the colours of food products by visual comparison with colour standards. It includes classification of certain machines in groups associated with the susceptibility to a change in unbalance. powder and liquid food products.25E Taper Thread for Connection of Valves to Gas Cylinders . 020.4 mm (designated 17E). __________________________________________________________________________________________ GS ISO 11116-2 : 1999Ψ 23.15 Published by GSA in 2008 Certification Scheme for Welded Fabric for the Reinforcement of Concrete Structures 9 Pages Gr 1 This standard specifies rules for a certification scheme for continuous production of welded fabric for ordinary reinforcement of concrete structure. in order to verfy the conformity with requirements specified in the product standards.Installation Dimensions for 8 Pages Clutches Gr 1 This standard specifies the nominal dimensions and tolerantes which affect the interchangeability between flywheels and spring-loaded Single.30 Published by GSA in 2007 Gas Cylinders — 17E Taper Thread for Connection of Valves to Gas Cylinders Part 1 : Specification 6 Pages Gr 1 This standard specifies definitions.63% (m/m) and in durum wheat semolinas __________________________________________________________________________________________ GS ISO 11055 : 1996Ψ 43. __________________________________________________________________________________________ GS ISO 11116-1 : 1999Ψ 23.30 Published by GSA in 2007 Gas Cylinders — 17E Taper Thread for Connection of Valves to Gas Cylinders Part 2 : Inspection Gauges 14 Pages Gr 2 It specifies types.020.060.020.30 Published by GSA in 2007 Transportable Gas Cylinders — Compatibility of Cylinder and Valve Materials with Gas 43 Pages Contents Part 1: Metallic Materials Gr 5 This standard gives guidance in the selection and evaluation of compatibility between metallic gas cylinder and valve materials. The flywheels are for use on reciprocating internal combustion engines in conjunction with flywheel housings and clutch housings which are dealt with in ISO 7648111 and ISO 7649121.10 Published by GSA in 2006 Flywheels for Reciprocating Internal Combustion Engines .140. with or without additives and having an ash yield not exceeding 0. and the gas content. __________________________________________________________________________________________ GS ISO 11082 : 1992Ψ 77.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 11050 : 1993Ψ 67. for the connection of valves to medical and industrial gas cylinders.020.30 Published by GSA in 2007 Transportable gas cylinders — Compatibility of Cylinder and Valve Materials with Gas 16 Pages Contents Part 2: Non-Metallic Materials Gr 2 This standard gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the cylinders' gas contents.or two-plate clutches. __________________________________________________________________________________________ GS ISO 11114-1 : 1997Ψ 23. to be used in conjunction with the taper thread specified in GS ISO 11116-2 __________________________________________________________________________________________ 264 . dimensions and tolerances of a taper screw thread of nominal diameter 17.040 Published by GSA in 2007 Wheat Flour and Durum Wheat Semolina. __________________________________________________________________________________________ GS ISO 11114-2 : 2000Ψ 23. dimensions and principles of the use of gauges.Determination of Impurities of Animal Origin 11 Pages Gr 2 This standard specifies a method for determining the content of impurities of animal origin in wheat flours. 220.220. __________________________________________________________________________________________ GS ISO 11124-3 : 1993Ψ 25. as supplied for blast-cleaning processes. The requirements specified __________________________________________________________________________________________ GS ISO 11124-4 : 1993Ψ 25.220. as supplied for blast cleaning processes. defect/structural requirements and Chemical composition.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products 8 Pages Specifications for Metallic Blast-Cleaning Abrasives Part 3 : High-Carbon Cast-Steel Shot and Grit Gr 1 This standard specifies requirements for 14 grades of high-carbon cast-steel shot and 12 grades of high-carbon cast-steel grit.220. as supplied for blast-cleaning processes. density.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 11124-1 : 1993Ψ 25. together with corresponding grade designations. moisture content.220. defect/structural requirements and Chemical composition.Part 1: General Introduction and 5 Pages Classification Gr 1 This standard describes a classification of metallic blast-cleaning abrasives for the preparation of steel Substrates before application of paints and related products. defect/structural requirements and Chemical composition. Values are specified for hardness.220.Part 1: General Introduction and Classification Gr 1 It describes a classification of non-metalllic blast-cleaning abrasives for the preparation of steel Substrates before application of paints and related products. Mohs hardness.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for Metallic Blast-Cleaning Abrasives Part 2 : Chilled-Iron Grit 6 Pages Gr 1 This standard specifies requirements for 12 grades of chilled-iron grit abrasives. Values are specified for hardness. It specifies the characteristics which are required for the complete designation of such abrasives. as supplied for blast-cleaning processes. Values are specified for hardness. __________________________________________________________________________________________ GS ISO 11124-2 : 1993Ψ 25. __________________________________________________________________________________________ 265 .10 Published by GSA in 2007 Preparation of steel Substrates before application of paints and related Products 6 Pages Specifications for Metallic Blast-Cleaning Abrasives Part 4 : Low-Carbon Cast-Steel Shot Gr 1 This specifies requirements for 12 grades of low-carbon cast-steel shot abrasive. density.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products 4 Pages Specifications for Non-Metallic Blast-Cleaning Abrasives . density. Lt specifies ranges of particle sizes. __________________________________________________________________________________________ GS ISO 11126-1 : 1993Ψ 25.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for Metallic Blast-Cleaning Abrasives . It applies to abrasives supplied __________________________________________________________________________________________ GS ISO 11126-10 : 2000Ψ 25. It specifies ranges of particle sizes and values for apparent density. conductivity of aqueous extract and water-soluble chlorides. It specifies the characteristics which are required for the complete designation of such abrasives.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products — Specifications for Non-Metallic Blast-Cleaning Abrasives Part 10 : Almandite Garnet 4 Pages Gr 1 This standard specifies requirements for almandite garnet abrasives. 10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products 4 Pages Specifications for Non-Metallic Blast-Cleaning Abrasives Part 5 : Nickel Refinery Slag Gr 1 This standard specifies requirements for nicke9 refinery slag abrasives.220. as supplied for blast-cleaning processes. Mosh hardness. Mosh hardness. moisture content. __________________________________________________________________________________________ GS ISO 11126-8 : 1993Ψ 25. Lt specifies ranges of particle sizes and values for apparent density. __________________________________________________________________________________________ 266 . as supplied for blast cleaning processes. conductivity of aqueous extract and water-soluble chlorides. The requirements specified in this standard apply to abrasives supplied in the “ne. __________________________________________________________________________________________ GS ISO 11126-6 : 1993Ψ 25.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 25.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for Non-Metallic Blast-Cleaning Abrasives . conductivity of aqueous extract and water soluble chlorides. Lt specifies ranges of particle sizes and values for apparent density. moisture content. Lt specifies ranges of particle sizes and values for apparent density. conductivity of aqueous extract and water-solublechlorides. Mosh hardness. as supplied for blast-cleaning processes.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for Non-Metallic Blast-Cleaning Abrasives . It specifies ranges of particle sizes and values for apparent density. __________________________________________________________________________________________ GS ISO 11126-7 : 1995Ψ 87. moisture content.” condition only. Lt specifies ranges of particle sizes and values for apparent density.220. Lt specifies ranges of particle sizes and values for apparent density. as supplied for blast cleaning processes. Mosh hardness. Mosh hardness. __________________________________________________________________________________________ GS ISO 11126-5 : 1993Ψ 25. conductivity of aqueous extract and water-soluble chlorides. Mosh hardness. __________________________________________________________________________________________ GS ISO 11126-4 : 1993Ψ 25.220.Part 7: Fused Aluminium 4 Pages Oxide Gr 1 It specifies requirements for fused aluminium oxide abrasives. as supplied for blast-cleaning processes. conductivity of aqueous extract and water-soluble chlorides.Part 6 : Iron Furnace Slag 4 Pages Gr 1 This standard specifies requirements for iron furnace slag abrasives.Part 4: Coal Furnace Slag 4 Pages Gr 1 This standard specifies requirements for coal furnace slag abrasives. conductivity of aqueous extract and water soluble chlorides. moisture content.Part 3: Copper Refinery Slag 4 Pages Gr 1 This standard specifies requirements for topper refinery slag abrasives. moisture content.220.10 GS ISO 11126-3 : 1993Ψ Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for Non-Metallic Blast-Cleaning Abrasives .020 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for Non-Metallic Blast-Cleaning Abrasives . moisture content.10 Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for non-metallic Blast-Cleaning Abrasives Part 8 : Olivine Sand 4 Pages Gr 1 This standard specifies requirements for olivine sand abrasives. bulk density.220. as supplied for blast-cleaning processes. by atomic absorption spectrometry with electro thermal atomization.Heavy Metals Content .Part 4: Determination of Cadmium Content by Atomic Absorption Spectrometry with Electro thermal Atomization 6 Pages Gr 1 This standard specifies a method for the determination of the Cadmium content of starch. by atomic absorption spectrometry with cold-vapour generation.Specification and Test Methods 67. ) in Brine .Heavy Metals Content . Mohs hardness. It can be used to check their hydraulic.180. by atomic absorption spectrometry with electro thermal atomization.220. It specifies ranges of particle sizes and values for apparent density. including derivatives and by-products.10 GS ISO 11126-9 : 1999Ψ Published by GSA in 2007 Preparation of Steel Substrates before Application of Paints and Related Products Specifications for Non-Metallic Blast cleaning Abrasives . including actual conditions of use (for example the operating fluid).Part 2: Determination of 6 Pages Mercury Content by Atomic Absorption Spectrometry Gr 1 This standard specifies a method for the determination of the mercury content of starch. __________________________________________________________________________________________ GS ISO 11212-2 : 1997Ψ 67.Sequence of Tests for Verifying Performance 6 Pages Characteristics Gr 1 This standard defines a sequence of tests for verifying filter elements. __________________________________________________________________________________________ GS ISO 11162 : 2001Ψ Published by GSA in 2005 Peppercorns (Piper Nigrum L. mechanical and separation characteristics.20 Published by GSA in 2007 Starch and Derived Products . __________________________________________________________________________________________ 267 . ) in brine. including derivatives and by-products. moisture content. as supplied for blast-cleaning processes. __________________________________________________________________________________________ GS ISO 11212-3 : 1997Ψ 67. This Standard is not intended to qualify a filter for a particular duty or replicate conditions of service.180.20 Published by GSA in 2007 Starch and Derived Products . including derivatives and by-products.10 11 Pages Gr 1 Specifies the requirements for peppercorn (Piper nigrum L. __________________________________________________________________________________________ GS ISO 11170 : 2003Ψ 23. conductivity of aqueous extract and water-soluble chlorides.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 25.20 Published by GSA in 2007 Starch and Derived Products . including derivatives and by-products. by atomic absorption spectrometry with hybrid generation.Part 1: Determination of Arsenic 6 Pages Content by Atomic Absorption Spectrometry Gr 1 This standard specifies a method for the determination of the arsenic content of starch.220.100.Heavy Metals Content . This can only be done by a specific test protocol developed for the purpose.Part 3:Determination of Lead Content by Atomic Absorption Spectrometry with Electro thermal Atomization 6 Pages Gr 1 This standard specifies a method for the determination of the lead content of starch.20 Published by GSA in 2007 Starch and Derived Products .Part 9 : Staurolite 5 Pages Gr 1 This standard specifies requirements for staurolite abrasives.Filter Elements . __________________________________________________________________________________________ GS ISO 11212-4 : 1997Ψ 670180. __________________________________________________________________________________________ GS ISO 11212-1 : 1997Ψ 67.60 Published by GSA in 2006 Hydraulic Fluid Power .Heavy Metals Content .180. It also specifies the refrigerants to be used for the evaluation of equipment.Dimensions and Tolerances .20 Published by GSA in 2007 Instant Coffee .Part 1 13 Pages : Metric Series Gr 2 This standard specifies tolerance grades for the outside diameter.020. halogenated hydrocarbon refrigerants and blends containing halogenated hydrocarbons __________________________________________________________________________________________ GS ISO 11755 : 2005Ψ 23.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 11292 : 1995Ψ 67. It specifies a test method for determining the resistance of paint coatings to artificial weathering in apparatus including fluorescent UV lamps and condensation or water spray. sucrose and mannitol __________________________________________________________________________________________ GS ISO 11507 : 2007Ψ 87. PSL-2. out-of-roundness and wall thickness of metric thermoplastics pipes for the conveyance of fluids an manufactured with nominal outside diameters and nominal pressures.Performance of Refrigerant Recovery and/or Recycling Equipment Gr 2 15 Pages The standard specifies the test apparatus. test gas mixtures.Karl Fischer Method (Reference Method) Gr 1 5 Pages This standard specifies a method for the determination of moisture content of roasted ground coffee by the Karl Fischer titration method. It is precise.20 Published by GSA in 2006 Thermoplastics Pipes for the Conveyance of Fluids .75 Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ GS ISO 11960 : 2004Ψ 75.140. during and after the time of filling for cylinder bundles for compressed and liquefied gases. This Standard does not apply to bundles when they are a part of a battery vehicle.20 Published by GSA in 2007 Roasted Ground Coffee . sampling procedures and analytical techniques used to determine the performance of refrigerant recovery and/or recycling equipment.040.180. it is suitable as a reference method. PSL-3 ) __________________________________________________________________________________________ 268 .Method using High-Performance Anion-Exchange Chromatography 16 Pages Gr 2 This standard specifies a method for the determination of free and total carbohydrate contents in instant coffee using high-performance anionexchange chromatography. 77.Determination of Free and Total Carbohydrate Contents . it determines the content of individual monosaccharides. __________________________________________________________________________________________ GS ISO 11650 : 1999Ψ 27. __________________________________________________________________________________________ GS ISO 11922-1 : 1997Ψ 23.Cylinder Bundles for Compressed and Liquefied Gases (excluding 5 Pages acetylene) .Steel Pipes for use as Casing or Tubing for Wells 291 Pages Gr.Inspection at Time of Filling Gr 1 This standard specifies the requirements for inspection before.Exposure of Coatings to Artificial Weathering . also referred to as bundles.020 Published by GSA in 2008 Refrigerating Technology .10.140.140. In particular.e. __________________________________________________________________________________________ GS ISO 11817 : 1994Ψ 67. 30 The standard specifies the technical delivery conditions for steel pipes coupling stock and accessories and establishes requirements for three product specification levels (PSL-1. This Standard does not apply to acetylene bundles.040 Published by GSA in 2005 Paints and Varnishes .Determination of Moisture Content . varnishes and related products.30 Published by GSA in 2006 Gas Cylinders .Exposure to 9 Pages Fluorescent UV and Water Gr 2 The standards deals with the sampling and testing of paints. i. 20 Published by GSA in 2006 Geometrical Product Specification (GPS) .Titrimetric Method 67. It also describes the corresponding ideal operator and measuring conditions __________________________________________________________________________________________ GS ISO 12192 : 2002Ψ Published by GSA in 2006 Paper and Board .Steel Drill Pipes 112 Pages Gr.140.10 Published by GSA in 2005 Dried Skimmed Milk .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 11961 : 2008Ψ 75.180.75 Published by GSA in 2011 Petroleum and Natural Gas Industries .Part 2 : Method using High 7 Pages Performance Liquid Chromatography Gr 1 Specifies a method using high-performance liquid chromatography (HPLC) for the determination of vitamin A in dried skimmed milk containing at least 10 IU (International Units) of vitamin A per gram. filled transport packages and a method for carrying out a stacking test on complete.Surface Texture . PSL-2.100. 77.10. __________________________________________________________________________________________ GS ISO 12085 : 1996Ψ 17. __________________________________________________________________________________________ GS ISO 12081 : 1998Ψ Published by GSA in 2005 Milk . Filled Transport Packages .100. __________________________________________________________________________________________ GS ISO 12080-1 : 2000Ψ 67.Compressive Strength .060 6 Pages Gr 1 This standard specifies a method for thee determination of the edgewise compressive strength ( ring crush resistance) of paper and paperboard.Determination of Vitamin A Content .Determination of Calcium Content . PSL-3 ) __________________________________________________________________________________________ GS ISO 12048 : 1994Ψ 55.Motif 17 Pages Parameters Gr 2 This standard defines terms and parameters used for determining surface texture by the motif method.10 Published by GSA in 2005 Dried Skimmed Milk . 12 This standard specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels ( PSL-1.Determination of Vitamin A Content .40 Published by GSA in 2005 Packaging.100. __________________________________________________________________________________________ GS ISO 12080-2 : 2000Ψ 67.Profile Method .Compression and Stacking Tests using a 5 Pages Compression Tester Gr 1 This standard specifies a method for testing the resistance to compression of complete. especially board used in the manufacture of cartons and packing cases __________________________________________________________________________________________ 269 .Part 1 : Colorimetric 7 Pages Method Gr 1 Specifies a colorimetric method for the determination of vitamin A in dried skimmed milk containing at least 10 IU (International Units) of vitamin A per gram.040.Ring Crush Method 85.180. filled transport packages using the Same apparatus.10 5 Pages Gr 1 This standard specifies a titrimetric method for the determination of the calcium content of milk and of milk reconstituted from evaporated. condensed or dried milk.Complete. Part 1 : Test Methods 79.060 Published by GSA in 2006 Tissue Paper and Tissue Products .Part 6 : Determination of Grammage 5 Pages Gr 1 This standard specifies a test method for the determination of gramage of tissue paper and tissue products. of tissue paper and tissue products under a pressure of 2. installed at a fixed location.30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products . __________________________________________________________________________________________ 270 . __________________________________________________________________________________________ GS ISO 12625-6 : 2005Ψ 85.Calibration of Horizontal Cylindrical Tanks 14 Pages Part 2 : Internal Electro-Optical Distance-Ranging Method Gr 2 This standard specifies a method for the calibration of horizontal cylindrical tanks having diameters greater than 2 m by means of internal measurements using an electro-optical distance-ranging instrument.Calibration of Horizontal Cylindrical Tanks Part 2 : Internal Electro-Optical Distance-Ranging Method 18 Pages Gr 2 This standard specifies manual methods for the calibration of nominally horizontal cylindrical tanks. battenboard and laminboard. Bulking Thickness 9 Pages and Apparent Bulk Density Gr 1 This standard specifies a test method for the determination of thickness.Part 3 : Determination of Thickness.080 Published by GSA in 2007 Petroleum Products . provided a correction is applied for the __________________________________________________________________________________________ GS ISO 12937 : 2000Ψ 75. __________________________________________________________________________________________ GS ISO 12917-2 : 2002Ψ 75.0 kPa. It covers the mass fraction range 0.100%(m/m).Determination of Water . It is not applicable to products containing ketones or to residual fuel oils. and for the subsequent compilation of tank-capacity tables. __________________________________________________________________________________________ GS ISO 12625-4 : 2005Ψ 85.10 16 Pages Gr 2 This standard specifies methods for determining the bonding quality of plywood.003 % (m/m) to 0. It is applicable to horizontal tanks up to 4 m in diameter and 30 m in length.060 Published by GSA in 2006 Tissue Paper and Tissue Products .Part 4 : Determination of Tensile Strength.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 12466-1 : 2007Ψ Published by GSA in 2011 Plywood . stretch at break and tensile energy absorption of tissue paper and tissue products.180.30 Published by GSA in 2007 Petroleum and Liquid Petroleum Products . __________________________________________________________________________________________ GS ISO 12625-3 : 2005Ψ 85. __________________________________________________________________________________________ GS ISO 12917-1 : 2002Ψ 75. It uses a tensile-testing apparatus operating with a constant rate of elongation.060 Published by GSA in 2006 Tissue Paper and Tissue Products .Coulometric Karl Fischer Titration Method 18 Pages Gr 2 This standard specifies a method for the direct determination of water in petroleum products boiling below 390 °C. by shear testing. and the calculation of apparent bulk density. It is applicable to tanks inclined by up to 10 % from the horizontal. Break and Tensile Energy Absorption 9 Pages Gr 1 This standard specifies a test method for the determination of the tensile strength.180.Bond Quality . bonded with thermosetting resin.060. blockboard. CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 13006 : 1998Ψ Published by GSA in 2006 Ceramic Tiles - Definitions, Classification, Characteristics and Marking 01.040.91; 91.100.20 56 Pages Gr 6 This standard defines terms and establishes classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality) __________________________________________________________________________________________ GS ISO 13007-1 : 2004Ψ 83.180: 91.100.23 Published by GSA in 2006 Ceramic Tiles - Grouts and Adhesives Part 1 - Terms, Definitions and Specifications for 9 Pages Adhesives Gr 1 This Standard is applicable to ceramic tile adhesives for internal and external tile installations on walls and floors __________________________________________________________________________________________ GS ISO 13007-2 : 2005Ψ Published by GSA in 2006 Ceramic Tiles - Grouts and Adhesives Part 2 - Test Methods for Adhesives 83.180; 91.100.23 39 Pages Gr 4 This Standard specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles. __________________________________________________________________________________________ GS ISO 13302 : 2003Ψ 67.240 Published by GSA in 2008 Sensory Analysis - Methods for Assessing Modification to the Flavor of foodstuffs due to 26 Pages Packaging Gr 3 This standard describes methods for assessing the changes caused by packaging to the sensory attributes of foodstuffs or their simulants. The methodology can be used as initial selection to assess a suitable packaging material or as subsequent acceptability screening of individual batches/production run __________________________________________________________________________________________ GS ISO 13341 : 1997Ψ Published by GSA in 2007 Transportable Gas Cylinders — Fitting of Valves to Gas Cylinders 23.020.30 7 Pages Gr 1 This standard specifies the essential procedures to be followed when connecting cylinder valves to gas cylinders.It also defines routines for inspection and preparation prior to valving for both taper and parallel screw threads. __________________________________________________________________________________________ GS ISO 13351 : 1996Ψ Published by GSA in 2006 Industrial Fans - Dimensions 23.120 10 Pages Gr 1 This standard specifies size designations for industrial fans and specifies dimensions for the circular and rectangular flanges of general purpose industrial fans as defined in 3.1 .I. It does not apply to cross-flow fans, or fan appliances used for household or similar applications. __________________________________________________________________________________________ GS ISO 13355 : 2001Ψ 55.180.40 Published by GSA in 2007 Packaging - Complete, Filled Transport Packages and Unit Loads - Vertical Random Vibration Test 5 Pages Gr1 This standard specifies a method to carry out a vertical random test on a complete, filled transport package(s) and unit loads using a random excitation __________________________________________________________________________________________ 271 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 13493 : 1998Ψ 67.120.10 Published by GSA in 2007 Meat and Meat Products - Determination of Chloramphenicol Content - Method using Liquid Chromatography 8 Pages Gr 1 This standard specifies a liquid chromatographic method for the determination of the chloramphenicol content of the muscle tissue of meat, __________________________________________________________________________________________ GS ISO 13496 : 2000Ψ 67.120.10 Published by GSA in 2007 Meat and Meat Products - Detection of Colouring Agents - Method using Thin - Layer 11 Pages Chromatography Gr 2 This standard specifies a thin - layer chromatographic method for the detection of synthetic, water soluble colouring agents in meat and meat products __________________________________________________________________________________________ GS ISO 13500 : 2008Ψ 75.100 Published by GSA in 2011 Petroleum and Natural Gas Industries - Drilling Fluids Materials - Specifications and 93 Pages Tests Gr. 10 This standard covers physical properties and test procedures for materials manufactured for use in oil and gas-well drilling fluids __________________________________________________________________________________________ GS ISO 13501 : 2005Ψ 75.100 Published by GSA in 2011 Petroleum and Natural Gas Industries - Drilling Fluids - Processing Systems Evaluation 51 Pages Gr. 6 The standard provides a standard procedure for assessing and modifying performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing __________________________________________________________________________________________ GS ISO 13503-1 : 2003Ψ 75.100 Published by GSA in 2011 Petroleum and Natural Gas Industries - Completion Fluids and Materials 20 Pages Part 1: Measurement of Viscous Properties of Completion Fluids Gr. 2 This standard provides consistent methodology for determining the viscosity of completion fluids used in the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 13503-2 : 2006Ψ 75.100 Published by GSA in 2011 Petroleum and Natural Gas Industries - Completion Fluids and Materials Part 2: Measurement of Properties of Proppants used in Hydraulic Fracturing and 28 Pages Gravel packing operations Gr. 3 The standard provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations __________________________________________________________________________________________ GS ISO 13503-3 : 2005Ψ 75.100 Published by GSA in 2011 Petroleum and Natural Gas Industries - Completion Fluids and Materials Part 3: Testing of Heavy Brines 44 Pages Gr. 5 This standard covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in the oil and gas well drilling __________________________________________________________________________________________ 272 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 13503-4 : 2006Ψ 75.100 Published by GSA in 2011 Petroleum and Natural Gas Industries - Completion Fluids and Materials Part 4: Procedure for Measuring Stimulation and Gravel - Pack Fluid Leakoff under 14 Pages Static Conditions Gr. 2 The standard provides for consistent methodology to measure fluid loss of stimulation and gravel-pack fluid under static conditions __________________________________________________________________________________________ GS ISO 13503-5 : 2006Ψ 75.100 Published by GSA in 2011 Petroleum and Natural Gas Industries - Completion Fluids and Materials 25 Pages Part 4: Procedure for Measuring the Long-Term Conductivity of Proppants Gr. 3 This standard provides testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations __________________________________________________________________________________________ GS ISO 13533 : 2001Ψ 85.060 Published by GSA in 2011 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill106 Pages Through Equipment Gr. 11 The standard specifies requirements for performance, design, materials, testing and inspection, welding, marking, handling, storing and shipping of drill-through equipment used for drilling for oil and gas __________________________________________________________________________________________ GS ISO 13534 : 2000Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Inspection, 12 pages Maintenance, Repair and Remanufacture of Hoisting Equipment Gr. 2 This International Standard gives guidelines and Establishes requirements for Inspection,maintenance,repair and remanufacture of items of hoisting equipment used in drilling and productions, in order to maintain the serviceability of this equipment. __________________________________________________________________________________________ GS ISO 13535 : 2000Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Hoisting Equipment 47 Pages Gr. 5 This standard provides requirements for the design, manufacture and testing of hoisting equipment suitable for use in drilling and production operations __________________________________________________________________________________________ GS ISO 13565-2 : 1996Ψ 17.040.20 Published by GSA in 2006 Geometrical Product Specifications (GPS) - Surface Texture -Profile Method - Surfaces having Stratified Functional Properties Part 2 - Height Characterization Using The Linear Material Ratio Curve Gr 1 6 Pages This standard describes the evaluation process for determining parameters from the linear representation of the of material ratio curve which describe the increase of the material portion of the surface with increasing depth of the roughness profile. They are intended to aid in assessing the operational behaviour of highly mechanically stressed surfaces. __________________________________________________________________________________________ GS ISO 13623 : 2009Ψ 75.200 Published by GSA in 2011 Petroleum and Natural Gas Industries - Pipeline Transportation Systems 84 Pages Gr. 9 This standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries __________________________________________________________________________________________ 273 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 13624-1 : 2009Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries- Drilling and Production Equipment Part 1: Design and Operation Of Marine Drilling Riser Equipment 109 Pages Gr. 11 The standard pertains to the design, selection, operation and maintenance of marine riser systems for floating drilling operations. Its purpose is to serve as a reference for designers, for those who select system components, and for those who use and maintain this equipment __________________________________________________________________________________________ GS ISO 13625 : 2002Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Marine 25 Pages Drilling Riser Couplings Gr. 3 This standard specifies requirements and gives recommendations for the design, rating, manufacturing and testing of marine drilling riser couplings. __________________________________________________________________________________________ GS ISO 13626 : 2003Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drilling and Well- Servicing Structures 31 Pages Gr. 4 This standard specifies requirements and recommendations for suitable steel structures for drilling and well-servicing operations in the petroleum industry, provides a uniform method of rating the structures __________________________________________________________________________________________ GS ISO 13628-1 : 2005Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems 232 Pages Part 1: General Requirements and Recommendations Gr. 24 The standard provides general requirements and overall recommendations for development of complete subsea production systems, from the design phases to decommissioning and abandonment __________________________________________________________________________________________ GS ISO 13628-10 : 2005Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 10: Specification for Bonded Flexible Pipe Gr. 8 73 Pages The standard defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria __________________________________________________________________________________________ GS ISO 13628-11 : 2007Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 11: Flexible Pipe Systems for Subsea and Marine Applications Gr. 22 213 Pages This standard provides guidelines for the design, analysis, manufacture, testing, installation and operation of flexible pipe systems for offshore, subsea and marine applications __________________________________________________________________________________________ GS ISO 13628-2 : 2006Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 2: Unbonded Flexible Pipe Systems for Subsea and Marine Applications Gr. 7 70 Pages The standard defines the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria __________________________________________________________________________________________ 274 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 13628-3 : 2000Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 3: Through Flowline ( TFL) Systems Gr. 7 67 Pages This standard specifies requirements and gives recommendations for the design, fabrication and operation of TFL equipment and Systems __________________________________________________________________________________________ GS ISO 13628-5 : 2009Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 5: Subsea Umbilicals Gr. 17 168 Pages This standard specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries. __________________________________________________________________________________________ GS ISO 13628-6 : 2006Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 6: Subsea Production Control Systems Gr. 13 123 Pages The standard covers surface control system equipment, subsea-installed control system equipment and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services __________________________________________________________________________________________ GS ISO 13628-7 : 2005Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems Part 7: Completion/ Work over Riser Systems Gr. 25 242 Pages It gives requirement and recommendations for the design, analysis, materials fabrication, testing and operation of subsea completion/work over riser systems run from floating vessel __________________________________________________________________________________________ GS ISO 13690 : 1999Ψ 67.060 Published by GSA in 2005 Cereals, Pulses and Milled Products - Sampling of Static Batches 18 Pages Gr 2 Specifies general conditions relating to sampling for the assessment of the quality of cereals, pulses and milled products from cereals and pulses (hereinafter called "grain"), in bulk or in bags, but excluding pellets. __________________________________________________________________________________________ GS ISO 13703 : 2000Ψ 75.180.20 Published by GSA in 2011 Petroleum and Natural Gas Industries-Design and Installation of Piping Systems on 78 Pages Offshore Production Platforms Gr. 8 This standard specifies minimum requirements and gives guidance for the design and installation of new piping systems on production platforms located offshore for the petroleum and natural gas industries. __________________________________________________________________________________________ GS ISO 13704 : 2007Ψ 75.180.20 Published by GSA in 2011 Petroleum, Petrochemical and Natural Gas Industries - Calculation of Heater 105 Pages Tube Thickness in Petroleum Refineries Gr. 11 The standard specifies the requirements and gives recommendations for the procedures and design criteria use for calculating the required wall thickness of new tubes and associated component fittings for petroleum-refinery heaters __________________________________________________________________________________________ 275 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 13706 : 2005Ψ 27.060.30 ; 75.180.20 Published by GSA in 2011 Petroleum, Petrochemical and Natural Gas Industries - Air -Cooled Heat Exchangers 115 Pages Gr. 12 The standard gives requirements and recommendations for the design, materials fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 13715 : 2000Ψ 01.040.01; 01.100.20 Published by GSA in 2006 Technical Drawings - Edges of Undefined Shape - Vocabulary and Indications 13 Pages Gr 2 This Standard defines the terms defining the states of edges and specifies rules for representing states of edges of unchanged shale in technical drawings. __________________________________________________________________________________________ GS ISO 13730 : 1996Ψ 67.120.10 Published by GSA in 2007 Meat and Meat Products - Determination of Total Phosphorus Content - Spectrometric Method 6 Pages Gr 1 This standard specifies a method for the determination of the total phosphorus content of all kinds of meat and meat products, including poultry __________________________________________________________________________________________ GS ISO 13761 : 1996Ψ 23.040.01 Published by GSA in 2006 Plastics Pipes and Fittings - Pressure Reduction Factors for Polyethylene Pipeline 3 Pages Systems for use at Temperatures above 20 °C Gr 1 This standard specifies a method for the derivation of reduction factors to apply to obtain the maximum allowable operating pressure for elevated-temperature operation of polyethylene (PE) pipeline systems. The factors given in table 1 or derived from the graph in figure 1 are applicable to fluids which do not adversely affect the long-term properties of the polyethylene material at temperatures between 20 “C and 40 “C. __________________________________________________________________________________________ GS ISO 13769 : 2007Ψ Published by GSA in 2010 Gas cylinders — Stamp marking 23.020.30 13 Pages Gr 2 This standard specifies stamp marking of refillable transportable gas cylinders and tubes of volume greater than 0,5 l and less than or equal to 3 000 l, including: steel and aluminium gas cylinders; composite gas cylinders; acetylene cylinders; LPG cylinders (see Annex B). __________________________________________________________________________________________ GS ISO 13847 : 2000Ψ 75.200 Published by GSA in 2011 Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Welding of Pipelines Gr. 5 50 Pages This standard specifies the requirements for producing and inspecting girth, branch and fillet welds in the pipeline part of pipeline transportation systems for the petroleum and natural gas industries. __________________________________________________________________________________________ GS ISO 13916 : 1996Ψ 25.160.10 Published by GSA in 2006 Welding - Guidance on the Measurement of Preheating Temperature, Interpass 3 Pages Temperature and Preheat Maintenance Temperature Gr 1 This standard specifies requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. This standard may also be applied as appropriate in the case of other welding processes. __________________________________________________________________________________________ 276 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 25.160.40 GS ISO 13919-1 : 1996Ψ Published by GSA in 2006 Welding - Electron and Laser-beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 1 - Steel 7 Pages Gr 1 This standard gives guidance on levels of imperfections in electron and laser beam welded joints in steel. Three levels are given in such a way as to permit application for a wide range of welded fabrications. The levels refer to production quality and not to the fitness-for-purpose of the product manufactured. __________________________________________________________________________________________ GS ISO 13920 : 1996Ψ 17.040.10; 25.100.10 Published by GSA in 2006 Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and 5 Pages Angles - Shape and Position Gr 1 This standard specifies general tolerances for linear and angular dimensions and for shape and position of welded structures in four tolerance classes, these being based on customary workshop accuracy. __________________________________________________________________________________________ GS ISO 13934-1 : 1999Ψ 59.080.30 Published by GSA in 2005 Textiles -Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force using the Strip Method 13 Pages Gr 2 Specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method. __________________________________________________________________________________________ GS ISO 13937-3 : 2000Ψ 59.080.30 Published by GSA in 2006 Textiles - Tear Properties of Fabrics Part 3 - Determination of Tear Force of Wing11 Pages Shaped Test Specimens (Single Tear Method) Gr 2 This standard describes a single tear method to determine fabric tear force, known as the wing test using a test specimen cut to form two wings for clamping inclined at a defined angle to the thread direction. __________________________________________________________________________________________ GS ISO 13965 : 1998Ψ 67.120.10 Published by GSA in 2007 Meat and Meat Products - Determination of Starch and Glucose Contents - Enzymatic 10 Pages Method Gr 1 This standard specifies an enzymatic method for the determination of water - free starch content and glucose content of all kinds of meat and meat products, including poultry __________________________________________________________________________________________ GS ISO 14001 : 2004Ψ 13.020.10 Published by GSA in 2005 Environmental Management Systems - Requirements with Guidance for use 23 Pages Gr 3 Specifies requirements for an environmental management systems to enable an organization to develop and implement a policy and objectives which take into account legal requirements and other requirements to which the organization subscribes. __________________________________________________________________________________________ GS ISO 14004 : 2004Ψ 13.020.10 Published by GSA in 2005 Environmental Management Systems General Guidelines on Principles. Systems and 39 Pages Support Techniques Gr 4 Provides guidance on the establishment, implementation, maintenance and improvement of an environmental management system and its coordination with other management system and its coordination with other management systems. __________________________________________________________________________________________ 277 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 14050 : 2002Ψ 01.040.13; 13.020.10 Published by GSA in 2005 Environmental Management - Vocabulary 29 Pages Gr 3 This standard contains definitions of fundamental concepts related to environmental management, published in the ISO 14000 series of International Standards. __________________________________________________________________________________________ GS ISO 14104 : 1995Ψ Published by GSA in 2006 Gears - Surface Temper Etch Inspection After Grinding 21.200 6 Pages Gr 1 This standard specifies standard procedures and requirements for the detection and classification of localized overheating on ground surfaces by chemical etch methods. __________________________________________________________________________________________ GS ISO 14112 : 1996Ψ Published by GSA in 2006 Gas Welding Equipment - Small Kits for Gas Brazing and Welding 26.100.30 7 Pages Gr 1 This standard specifies safety requirements for the construction of small kits for brazing, soldering and welding for non-professional use. This Standard is also applicable to appliances whose welding equipment is completely set up in the factory and which use a liquefied gas or gas mixture as combustible gas, and compressed oxygen, air or an air/oxygen mixture for __________________________________________________________________________________________ GS ISO 14224 : 2006Ψ 77.180.01 ; 75.200 Published by GSA in 2011 Petroleum, Petrochemical and Natural Gas Industries - Collection and Exchange of 170 Pages Reliability and Maintenance Data for Equipment Gr. 17 The standard provides a comprehensive basis for the collection of reliability and maintenance data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of the equipment __________________________________________________________________________________________ GS ISO 14245 : 2006Ψ 23.020.30 Published by GSA in 2007 Gas Cylinders — Specifications and Testing of LPG Cylinder Valves — Self-Closing 19 Pages Gr 2 This standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. __________________________________________________________________________________________ GS ISO 14284 : 1996Ψ 77.140.01 Published by GSA in 2008 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical 47 Pages Composition Gr 5 The standard specifies methods for sampling and sample preparation for the determination of the chemical composition of pig iron, cast-iron, and steel. Methods are specified for use with both liquid and solid metal __________________________________________________________________________________________ GS ISO 14310 : 2008Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries - Down hole Equipment - Packers and Bridge Plugs 27 Pages Gr. 3 The standard provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industries __________________________________________________________________________________________ 278 CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 14313 : 2007Ψ 75.200 Published by GSA in 2011 Petroleum and Natural Gas Industries - Pipelines Transportation Systems - Pipeline Valves 77 Pages Gr. 8 The standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems . __________________________________________________________________________________________ GS ISO 14377 : 2002Ψ 67.100.10 Published by GSA in 2005 Canned Evaporated Milk- Determination of Tin Content- Method using Graphite 8 Pages Furnace- Atomic Absorption Spectrometry Gr 2 This standard specifies a graphite furnace atomic absorption spectrometric method for the determination of the tin content of (sterilized) canned evaporated milk. It is applicable to samples with tin contents of more than 5 mg/kg. __________________________________________________________________________________________ GS ISO 14691 : 2008Ψ 75.180.20 Published by GSA in 2011 Petroleum, Petrochemical and Natural Gas Industries - Flexible Couplings for 32 Pages Mechanical Power Transmission - General - Purpose Applications Gr. 4 This standard specifies the requirements for coupling for the transmission of power between the rotating shafts of two machines for general-purpose applications in the petroleum, petrochemical and natural gas industries __________________________________________________________________________________________ GS ISO 14692-1 : 2002Ψ 27.060.30 ; 75.180.20 Published by GSA in 2011 Petroleum and Natural Gas Industries - Glass - Reinforced Plastics (GRP) Piping Part 1:Vocabulary, Symbols, Applications and Materials 26 Pages Gr. 3 This standard gives the terms, definitions and symbols used in the specification, manufacture, testing and installation of glass - reinforced plastics ( GRP) piping installations associated with offshore applications on both fixed and floating topsides facilities for oil and gas industry production and processing __________________________________________________________________________________________ GS ISO 14692-2 : 2002Ψ 75.200 ; 83.140.30 Published by GSA in 2011 Petroleum and Natural Gas Industries - Glass - Reinforced Plastics (GRP) Piping 86 Pages Part 2: Qualification and Manufacture Gr. 9 This standard gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any source __________________________________________________________________________________________ GS ISO 14692-3 : 2002Ψ 75.200 ; 83.140.30 Published by GSA in 2011 Petroleum and Natural Gas Industries - Glass - Reinforced Plastics (GRP) Piping 79 Pages Part 3: System Design Gr. 8 The standard gives guidelines for the design of GRP piping systems. The requirements and recommendations apply to layout dimensions, hydraulic design, structural design, detailing, fire endurance, spread of fire and emissions and control of electrostatic discharge __________________________________________________________________________________________ GS ISO 14692-4 : 2002Ψ 75.200 ; 83.140.30 Published by GSA in 2011 Petroleum and Natural Gas Industries - Glass - Reinforced Plastics (GRP) Piping Part 4: Fabrication, Installation and Operation 52 Pages Gr. 6 The standard gives requirements and recommendations for the fabrication, installation and operation of GRP piping systems for use in oil and natural gas industry processing and utility service applications __________________________________________________________________________________________ 279 Drilling and Well .10 Published by GSA in 2011 Down hole Equipment for Petroleum and Natural Gas Industries .Subsea Pipeline Valves Gr. design verification and validation. 9 The standard provides general principles and specifies requirements for design.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 14693 : 2003Ψ 75. manufacture and testing of new drilling and well servicing equipment.180. performance ratings and repair of progressing cavity pump surface-drive systems for use in the petroleum and natural gas industry __________________________________________________________________________________________ 280 .160.01 Published by GSA in 2007 Welding Personnel — Approval Testing of Welding Operators for fusion Welding and of Resistance Weld Setters for fully Mechanized and Automatic Welding of Metallic Materials Gr 2 13 Pages This standard specifies requirements for approval of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding processes of metallic materials.Evaluation of Gelatinization time of Kernels during cooking 67.10 Published by GSA in 2005 Dried Skimmed Milk .10 Published by GSA in 2011 Petroleum and Natural Gas Industries .180. __________________________________________________________________________________________ GS ISO 15136-1 : 2001Ψ 75. manufacturing and data control. __________________________________________________________________________________________ GS ISO 14892 : 2002Ψ 67. __________________________________________________________________________________________ GS ISO 14732 : 1998Ψ 25.200 Published by GSA in 2011 Petroleum and Natural Gas Industries .060 9 Pages Gr 1 The standard specifies a method of evaluating the gelatinization time of rice kernels during cooking.Servicing Equipment 81 Pages Gr. Personnel exclusively performing the programming of the welding unit or operation of the welding unit do not need any particular approval. 5 49 Pages The standard provides requirements for the design.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .100. check. __________________________________________________________________________________________ GS ISO 14723 : 2009Ψ 75. __________________________________________________________________________________________ GS ISO 14864 : 1998Ψ Published by GSA in 2008 Rice .Progressing Cavity Pump Systems for Artificial LiftPart 1: Pumps Gr.180. Only welding operators/resistance weld setters responsible for the setting up and/or adjustment during welding have to be approved.Pipelines Transportation Systems . 8 72 Pages The standard specifies requirements and gives recommendations for the design. gate and plug valves for subsea application in offshore pipeline systems . testing and documentation of ball. 4 31 Pages The standard provides guidelines and requirements for subsurface progressing cavity pumps used in the petroleum and natural gas industries for the production of single and multiphase fluids __________________________________________________________________________________________ GS ISO 15136-2 : 2006Ψ 75. It is applicable to milled rice.Drive Systems Gr.Determination of Vitamin D Content using High Performance Liquid 11 Pages Chromatography Gr 2 This standard specifies a method for the determination of vitamin D in a test sample containing at least 10 µg of vitamin D per 100 g [equal to 400 International Units (IU) of vitamin D per 100 g] by using high performance liquid chromatography (HPLC).Progressing Cavity Pump Systems for Artificial Lift Part 2: Surface . manufacturing. Containing Environments in Oil and Gas Production : Part 1: General Principles for Selection of Cracking . 8 This standard gives requirements and recommendations for the selection and qualification of CRAs and other alloys for service in equipment use in oil and natural gas production and natural gas treatment plants in H2S-containing environments __________________________________________________________________________________________ GS ISO 15301 : 2001Ψ 67.Offshore Production Installations .160 . 5 45 Pages This standard gives requirements and recommendations for the selection and qualification of carbon and lowalloys steels for service in equipment use in oil and natural gas production and natural gas treatment plants in H2S-containing environments __________________________________________________________________________________________ GS ISO 15156-3 : 2009Ψ 77.Containing Environments in Oil and Gas Production : Part 2: Cracking .Resistant CRAs ( Corrosion .Conditioning 110 Pages Gr.01 Published by GSA in 2011 Petroleum and Natural Gas Industries . 11 This standard specifies requirement and provides guidance for design.Resistant Carbon and Low-Alloy Steels. Ventilation and Air. 1 10 Pages The standard describe general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments __________________________________________________________________________________________ GS ISO 15156-2 : 2009Ψ 75.180.01 Published by GSA in 2011 Petroleum and Natural Gas Industries .Materials for use in H2s .Measurement and Calibration Procedures 83 Pages Gr 9 This standard specifies measurement and calibration procedures of single .Heating. __________________________________________________________________________________________ GS ISO 15387 : 2005Ψ 27.200.20 Published by GSA in 2011 Petroleum and Natural Gas Industries .Determination of Ochratoxin A in Cereals and Cereal Products Part 2: High 9 Pages Performance Liquid Chromatographic Method with Bicarbonate Clean Up Gr 1 This standard specifies a method for the determination of ochratoxin A (OTA) at levels greater than 3ug/kg __________________________________________________________________________________________ GS ISO 15156-1 : 2009Ψ 75.Determination of Sediments in Crude Fats and Oils 9 Pages Centrifuge Method Gr 1 This standard specifies a method for the determination in crude fats or oils of that sediment which can be separated by centrifugal force. testing.junction space solar cells only. ventilation.Resistant Materials Gr.140 Published by GSA in 2007 Space Systems .060 Published by GSA in 2006 Foodstuffs . __________________________________________________________________________________________ 281 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 15138 : 2007Ψ 75.Junction Solar Cells .Single .180.180. air-conditioning and pressurization systems and equipment on all offshore production installations for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 15141-2 : 1998Ψ 67.Materials for use in H2s .10 Published by GSA in 2006 Animal and Vegetable Fats and Oils . 49. and the use of Cast Irons Gr.Containing 73 Pages Environments in Oil and Gas Production Part 3: Cracking .Resistant Alloys) and other Alloys Gr. installation and commissioning of heating.180.01 Published by GSA in 2011 Petroleum and Natural Gas Industries .Materials for use in H2s . selection. 3 The standard gives requirements and recommendations for the mechanical design. varnishes and raw materials for paints and varnishes.Plate . materials.Requirements and Guidelines for Emergency Response 43 Pages Gr.040 Published by GSA in 2005 Paints. Such products include liquids and materials which. petrochemical and natural gas industries __________________________________________________________________________________________ GS ISO 15552 : 2004Ψ 23.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ 282 . 5 This standard describes objectives. Petrochemical and Natural Gas Industries . It also covers the practices and technology commonly used in field inspection __________________________________________________________________________________________ GS ISO 15528 : 2000Ψ 87. __________________________________________________________________________________________ GS ISO 15546 : 2007Ψ 77.30.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 15463 : 2003Ψ 75.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . are capable of being liquefied when heated up. granulated and pasty materials. petrochemical and natural gas industries __________________________________________________________________________________________ GS ISO 15547-2 : 2005Ψ 27. without undergoing chemical modification. testing and preparation for shipment of plate-and frame heat exchangers for use in petroleum.Frame Heat Exchangers Gr.150.20 Published by GSA in 2011 Petroleum. inspection. material requirements.Type Heat Exchangers 26 Pages Part 1: Plate . fabrication. materials.180.Fin Heat Exchangers Gr.Type Heat Exchangers 26 Pages Part 2: Brazed Aluminium Plate . Varnishes and Raw Materials for Paints and Varnishes . 3 This standard specifies the technical delivery condition. 12 The standard specifies requirements and gives recommendations for field inspection and testing of oil country tubular goods.Field Inspection of New Casing. 75. Tubing and Plain .20 Published by GSA in 2000 Pneumatic Fluid Power . and also powdered. fabrication.Sampling 15 Pages Gr 2 Describes manual methods of sampling paints. with Detachable Mountings.30. inspection. Bores from 32 mm to 320 mm.Plate . __________________________________________________________________________________________ GS ISO 15544 : 2000Ψ 75. manufacturing process.Offshore Production Installations .060. 3 The standard gives requirements and recommendations for the mechanical design. selection.Aluminium Alloy Drill Pipe 29 Pages Gr. Petrochemical and Natural Gas Industries .180.10 .10 Published by GSA in 2011 Petroleum and Natural Gas Industries .180.180.fin heat exchangers for use in petroleum.mounting dimensions 18 Pages Gr 2 This standard establishes a metric series of mounting dimensions required for interchangeability of commonly used pneumatic cylinders for a maximum working pressure of1 000 kPa (10 bar). functional requirements and guidelines for emergency response measures on installations used for the development of offshore hydrocarbon resources.and .180. 77. 1 000 kPa (10 bar) Series.100. testing and preparation for brazed aluminium plate. configuration and dimensions and verification and inspection procedures for aluminimu alloy drill pipes with or without attached steel tool joints for use in drilling and production operations in the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 15547-1 : 2005Ψ 27.20 Published by GSA in 2011 Petroleum. 75.060.End Drilling Pipe 112 Pages Gr.Single Rod Cylinders. 10 Published by GSA in 2007 Specification and Qualification of Welding Procedures for Metallic Materials -Welding 28 Pages Procedure Test .180 Published by GSA in 2006 Adhesives . Fittings and Flanges for Pipeline Transportation Systems : Part 1: Induction Bends Gr. operation. commission. 6 54 Pages This standard specifies requirements and gives recommendations for the pre-installation surveys. Fittings and Flanges for Pipeline Transportation Systems Part 2: Fittings Gr. inspection and maintenance of cathodic protection systems for offshore pipelines for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 15590-1 : 2009Ψ 75. 4 32 Pages The standard specifies the technical delivery conditions for bends made by the induction bending process for use in pipeline transportation systems for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 15590-2 : 2003Ψ 75. fabrication.Land Pipelines Gr.Cathodic Protection of Pipeline Transportation Systems Part 1: On .200 Published by GSA in 2011 Petroleum and Natural Gas Industries .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 75. installation.200 Published by GSA in 2011 Petroleum and Natural Gas Industries . equipment. 2 17 Pages This standard applies to weld neck and blind flanges as well as anchor.200 GS ISO 15589-1 : 2003Ψ Published by GSA in 2011 Petroleum and Natural Gas Industries . design. materials. fabrication.Induction Bends.160.Induction Bends.Induction Bends. __________________________________________________________________________________________ GS ISO 15614-1 : 2004Ψ 25. inspection and maintenance of cathodic protection systems for on-land pipelines __________________________________________________________________________________________ GS ISO 15589-2 : 2004Ψ 75. equipment.Cathodic Protection of Pipeline Transportation Systems Part 2: Offshore Pipelines Gr.Part 1: Arc and Gas Welding of Steels and Arc Welding of Nickel and Nickel Alloys Gr 3 This standard specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It also defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in clause 8. commission. materials. 3 26 Pages The standard specifies the technical delivery conditions for unalloyed or low-alloy steel seamless and welded pipeline fittings for use in pipeline transportation systems for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 15590-3 : 2004Ψ 75.200 Published by GSA in 2011 Petroleum and Natural Gas Industries . Fittings and Flanges for Pipeline Transportation Systems : Part 3: Flanges Gr. __________________________________________________________________________________________ 283 .200 Published by GSA in 2011 Petroleum and Natural Gas Industries . 4 40 Pages This standard specifies requirements and gives recommendations for the pre-installation surveys.Sampling 8 Pages Gr 1 This standard specifies methods for sampling adhesives and related products. in order to obtain uniform samples of convenient size which are adequately representative of the product being sampled. It also specifies the technical requirements for carbon steel and low-alloy steel forged flanges for use in pipeline transportation systems for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 15605 : 2000Ψ 83. swivel-ring flanges and orifice flanges. installation. operation. design. 10 Published by GSA in 2011 Petroleum and Natural Gas Industries . 2 It specifies requirements for undertaking life-cycle costing for the development and operation of facilities for drilling.77 .rolled steel sheet products __________________________________________________________________________________________ GS ISO 16162 : 2005Ψ 77.040.Dimensional and Shape Tolerances 5 Pages Gr 1 This standard applies to dimensional and shape tolerances for all continuously hot . B2.50 Published by GSA in 2007 Continuously Cold . and for test of aflatoxins B1.180. G1 12 Pages and G2 in Cereals.140.15 Published by GSA in 2008 Steel for the Reinforcement and Prestressing of Concrete .Rolled Steel Sheet Products .060 Published by GSA in 2006 Foodstuffs . __________________________________________________________________________________________ GS ISO 16070 : 2005Ψ 75. __________________________________________________________________________________________ GS ISO 16050 : 2003Ψ 67.10 GS ISO 15630-1 : 2002Ψ Published by GSA in 2008 Steel for the Reinforcement and prestressing of Concrete . for the determination of aflatoxins in cereals.50 Published by GSA in 2007 Continuously Hot .Rolled Steel Sheet Products . 77. wire. 3 The standard provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 16160 : 2005Ψ 77. B2.Dimensional and Shape Tolerances 5 Pages Gr 1 This standard applies to dimensional and shape tolerances for all continuously cold . with immunoaffinity column clean-up and post-column derivatization.Determination of Aflatoxin B1 and Total Content of Aflatoxins B1.14. production and pipeline transportation within the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 16020 : 2005Ψ 01. Wire Rod and Wire 17 Pages Gr 2 This standard specifies test methods applicable to reinforcing bars. The limit of quantification for aflatoxin B1. G1 and G2 is 8 ug/kg. nuts and derived products.High Performance Liquid Chromatographic Method Gr 2 This standard specifies a reverse-phase high-performance liquid chromatographic method.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 77. Nuts and Derived Products .Life Cycle Costing 17 Pages Part 1: Methodology Gr.Downhole Equipment . __________________________________________________________________________________________ GS ISO 15663-1 : 2000Ψ 75.rolled steel sheet products __________________________________________________________________________________________ 284 .020 Published by GSA in 2011 Petroleum and Natural Gas Industries .Vocabulary 16 Pages Gr 2 The standard defines terms and symbols to be used in the field of reinforcing and prestressing steel for concrete.140. rod and wire.Test Methods Part 1: Reinforcing Bars.040.Lock Mandrels and Landing Nipples 24 Pages Gr. quality control.140. fabrication.50 Published by GSA in 2007 Continuously Hot . Petrochemical and Natural Gas Industries . designing. testing and preparation for shipping of flow-control devices __________________________________________________________________________________________ GS ISO 17078-3 : 2009Ψ 75. 4 40 Pages Tit provides requirements for side-pocket mandrels used in the petroleum and natural gas industry. 13 The standard provides requirements for surface flow-control devices used in side-pocket mandrel intended for use in worldwide petroleum and natural gas industry.180. inspection.200 Published by GSA in 2011 Petroleum and Natural Gas Industries .020.Pocket Mandrels Gr.Pocket Mandrels Gr. 6 The standard specifies the functional requirements and principles for design.dipped coated steel sheet products __________________________________________________________________________________________ GS ISO 16642 : 2003Ψ 01. 5 41 Pages This standard provides requirements and guidelines for running tools. material selection.30 Published by GSA in 2010 Computer Applications in Technology .Dimensional and Shape Tolerances Gr 1 6 Pages This standard applies to dimensional and shape tolerances for all continuously hot .240.20 Published by GSA in 2011 Petroleum .Pipeline Transportation Systems . designing. manufacturing. operation and requalification of pipelines in the petroleum and natural gas industries using reliability-based limit state methods __________________________________________________________________________________________ GS ISO 16812 : 2007Ψ 75.Terminological Markup Framework 49 Pages Gr 5 This standard specifies a framework designed to provide guidance on the basic principles for representing data recorded in terminological data collections __________________________________________________________________________________________ GS ISO 16708 : 2006Ψ 75.Over Tools and Latches for Side .Dipped Coated Steel Sheet Products . It also specifies the selecting. testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum .Drilling and Production Equipment Part 1: Side-Pocket Mandrels Gr. pulling tools.180. 35.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .Control Devices for Side .Shell-and-Tube Heat Exchangers 41 Pages Gr. Pulling Tools and Kick .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 16163 : 2005Ψ 77. kick-over tools and latches used for the installation and retrieval of flow control and other devices to be installed in side-pocket mandrels for use in the petroleum and natural gas industries __________________________________________________________________________________________ 285 . manufacturing. 5 This standard specifies requirements and gives recommendations for the mechanical design. testing and preparation for shipping of side-pocket mandrels __________________________________________________________________________________________ GS ISO 17078-2 : 2007Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .180.Drilling and Production EquipmentPart 3: Running Tools.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . It also specify the selecting.Reliability 57 Pages Based Limit State Methods Gr. petrochemical and natural gas industries __________________________________________________________________________________________ GS ISO 17078-1 : 2004Ψ 75.Drilling and Production Equipment 127 Pages Part 2: Flow. quality control. pigs.Determination of Arsenic Content . vegetables and derived products __________________________________________________________________________________________ GS ISO 17240 : 2004Ψ 67.160. It also specifies a type testing method for assessing the performance of a socketing system __________________________________________________________________________________________ GS ISO 17584 : 2005Ψ Published by GSA in 2008 Refrigerant Properties 71.01 Published by GSA in 2006 Fruit and Vegetable Products . The techniques are based on generally recognized practice and fundamental theory of the subject. __________________________________________________________________________________________ 286 .Carcass Sampling for Microbiological 14 Pages Analysis Gr 2 This standard specifies sampling methods for the detection and enumeration of microorganisms on the carcass surface of freshly slaughtered (red) meat animals. sheep.40 Published by GSA in 2007 Non-Destructive Testing of Welds .080.Determination of Tin Content .160.Method using Hydride Generation Atomic Absorption Spectrometry 10 Pages Gr 1 This standard specifies a hydride generation atomic absorption spectrometric method for the determination of the arsenic content of fruits. __________________________________________________________________________________________ GS ISO 17558 : 2006Ψ 77. __________________________________________________________________________________________ GS ISO 17637 : 2003Ψ Published by GSA in 2007 Non-Destructive Testing of Welds .65 Published by GSA in 2006 Steel Wire Ropes . It may also be applied to visual testing of the joint prior to welding. Vegetables and Derived Products . __________________________________________________________________________________________ GS ISO 17636 : 2003Ψ 25.140. The object is to obtain satisfactory and repeatable results using the most economical methods.080.Socketing Procedures .40 10 Pages Gr 1 This standard covers the visual testing of fusion welds in metallic materials.Visual Testing of Fusion-Welded Joints 25.Molten Metal and Resin Socketing 16 Pages Gr 2 This standard specifies procedures for the molten metal and resin socketing of steel wire ropes. horses.100.Method using Flame 5 Pages Atomic Absorption Spectrometry Gr 1 This standard specifies an atomic absorption spectrometric method for the determination of the tin content of fruit and vegetable products I the concentration range 10 mg/kg to 500 mg/kg. goats and game raised in captivity.01 Published by GSA in 2006 Fruits.30 Published by GSA in 2008 Microbiology of Food and Animal Feeding Stuffs .45 70 Pages Gr 7 This standard specifies thermo physical properties of several commonly used refrigerants and refrigerant blends __________________________________________________________________________________________ GS ISO 17604 : 2003Ψ 07. The microbiological sampling can be carried out as part of the process control in slaughter establishments for cattle.Radiographic Testing of Fusion welded Joints 35 Pages Gr 4 This standard specifies fundamental techniques for radiographic testing of fusion-welded joints in metallic materials.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 17239 : 2004Ψ 67.100. 180. in order to assess the suitability for the end use __________________________________________________________________________________________ GS ISO 17776 : 2000Ψ 75.060.Down hole Equipment-Sand screens 75. Fittings and Compounds 9 Pages Gr 1 This standard describes a method with two procedures for the assessment of pigment or carbon black particle and agglomerate size and degree of dispersion in polyolefin pipes.Guidelines on Tools and Techniques for Hazard Identification and Risk Assessment 59 Pages Gr.Tensile Strength and Elongation 61. fittings and compounds __________________________________________________________________________________________ GS ISO 19011 : 2002Ψ 03. 6 The standard describes some of the principles tools and techniques that are commonly used for the identification and assessment of hazards associated with offshore oil and gas exploration and production.10.45 Published by GSA in 2006 Method for the Assessment of the Degree of Pigment or Carbon Black Dispersion in Polyolefin Pipes. __________________________________________________________________________________________ GS ISO 17706 : 2003Ψ Published by GSA in 2006 Footwear .Offshore Production Installations . 13.160. __________________________________________________________________________________________ GS ISO 18553 : 2002Ψ 23. __________________________________________________________________________________________ GS ISO 19458 : 2006Ψ Published by GSA in 2008 Water Quality .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 17639 : 2003Ψ 25.40 Published by GSA in 2007 Destructive Tests on Welds in Metallic Materials . 23. on sampling procedures for microbiological analysis and on transport.180.120.040.060 5 Pages Gr 1 This standard specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material. managing audit programme.040.10 38 Pages Gr.020. conducting quality management system audits and environmental management system audits. __________________________________________________________________________________________ 287 .Test Methods for Uppers . handling and storage of samples until analysis begins.20 Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ GS ISO 17824 : 2009Ψ Published by GSA in 2011 Petroleum and Natural Gas Industries .10 Published by GSA in 2005 Guidelines for Quality and/ or Environmental Management Systems Auditing 31 Pages Gr 4 This standard provides guidance on the principles of auditing.Sampling for Microbiological Analysis 13. test procedures and their main objectives for macroscopic and microscopic examination.Macroscopic and Microscopic Examination of Welds 9 Pages Gr 1 This standard gives recommendations for specimen preparation.20. 4 This standard provides the requirements and guidelines for sand control screens for use in the petroleum and natural gas industries. as well as guidance on the competence of quality and environmental management system auditors. It focuses on sampling for microbiological investigations.45 18 Pages Gr 2 This standard provides guidance on planning water sampling regimes. 14 135 Pages This standard gives general requirements for the determination and use of meteorological and oceanographic (metocean) condition for the design.180. drilling. systems. well intervention and production and assessment of shore keeping systems for site-specific applications of mobile offshore units __________________________________________________________________________________________ 288 . 17 165 Pages The standard provides requirements and guidance for the planning and engineering of marine operations.Specific Requirements for offshore Structures Part 7: Station keeping Systems for Floating Offshore Structures and Mobile Offshore Gr.Specific Requirements for offshore Structures Gr.Specific Requirements for offshore Structures Gr. encompassing the design and analysis of the components. construction and operation of offshore structures of all types used in the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 19901-2 : 2004Ψ 75. equipment and procedures required to perform marine operations __________________________________________________________________________________________ GS ISO 19901-7 : 2005Ψ 75.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 19900 : 2002Ψ 75.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . 3 This standard specifies general principles for the design and assessment of structures subjected to known or foreseeable types of action. 4 34 Pages The standard contains requirements and recommendations for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures. 12 117 Pages This standard specifies methodologies for the design.180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .180.180.180. analysis and evaluation of station keeping systems for floating structures used by the oil and gas industries to support production.Specific Requirements for offshore Structures Gr. storage.Specific Requirements for offshore Structures Gr.180.Specific Requirements for offshore Structures Gr. concrete and aluminium __________________________________________________________________________________________ GS ISO 19901-1 : 2005Ψ 75.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .10 Published by GSA in 2011 Petroleum and Natural Gas Industries .10 Published by GSA in 2011 Petroleum and Natural Gas Industries .10 Published by GSA in 2011 Petroleum and Natural Gas Industries . 5 46 Pages The standard contains requirements for defining the seismic design procedures and criteria for offshore structure __________________________________________________________________________________________ GS ISO 19901-4 : 2003Ψ 75. These general principles are applicable worldwide to all types of offshore structures including bottom-founded structures as well as floating structures and to all types of materials used including steel.General Requirements for Offshore Structures 28 Pages Gr.10 Published by GSA in 2011 Petroleum and Natural Gas Industries. 5 50 Pages The standard specifies requirements for controlling the weight and centre of gravity by means of mass management during the engineering and construction of structures for the offshore environment __________________________________________________________________________________________ GS ISO 19901-6 : 2009Ψ 75. rather than to a particular structure type __________________________________________________________________________________________ GS ISO 19901-5 : 2003Ψ 75. knitted and other flat textiles.100 Published by GSA in 2007 Petroleum and Related Products . exploitation.Fixed Steel Offshore Structure 75. 12 The standard specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 19904-1 : 2006Ψ 75. free-standing and braced.10 119 Pages Gr.080.Determination of the Extreme Pressure and Anti 17 Pages Wear Properties of Fluids .180.200 Published by GSA in 2011 Petroleum.170 Published by GSA in 2007 Dentistry .Powered Toothbrushes .Four Ball Method (European Conditions) Gr 2 This standard specifies procedures for the measurement of the extreme .Fixed Concrete Offshore Structures 750180. Semi-Submersibles and Spars Gr.01 Published by GSA in 2006 Textile Fabrics .180. processing and transport of petroleum.General Requirements and Test Methods 6 Pages Gr 1 This standard specifies requirements and test methods for the physical properties of powered toothbrushes in order to promote the safety of these products for their intended use __________________________________________________________________________________________ GS ISO 20623 : 2003Ψ 75.Determination of Antibacterial Activity . towers __________________________________________________________________________________________ GS ISO 19903 : 2006Ψ Published by GSA in 2011 Petroleum and Natural Gas Industries . __________________________________________________________________________________________ GS ISO 20815 : 2008Ψ 77. jackets. 75.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . 28 This standard specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: caissons. Petrochemical and Natural Gas Industries.01 .180. petrochemical and natural gas resources __________________________________________________________________________________________ 289 .Floating Offshore Structures 180 Pages Part 1: Monohulls.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 19902 : 2007Ψ Published by GSA in 2011 Petroleum and Natural Gas Industries . 18 The standard provides requirements and guidance for the structural design and /or assessment of floating offshore platforms used by the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 20127 : 2005Ψ 97.pressure (EP) and anti-wear properties of lubricating oils and fluids by means of the four ball machine __________________________________________________________________________________________ GS ISO 20645 : 2004Ψ 59.10 271 Pages Gr.Production Assurance and 65 Pages Reliability Management Gr. 7 The standard introduces the concept of production assurance within the systems and operations associated with exploration drilling.Agar Diffusion Plate Test 9 Pages Gr 1 This document specifies a method for the determination of the effect of antibacterial treatment applied to woven. monotowers. 10 99 Pages This standard specifies requirements for field joint coating of seamless or welded steel pipes for pipeline transportation systems in the petroleum and natural gas industries __________________________________________________________________________________________ 290 . testing.External Coatings for Buried or Submerged Pipelines used in Pipeline Transportation Systems:Part 2: Fusion.7 % (m/m). which have a maximum oxygen content of 2.Bonded Epoxy Coatings Gr. __________________________________________________________________________________________ GS ISO 21809-2 : 2007Ψ 75. In this method.200 Published by GSA in 2011 Petroleum and Natural Gas Industries .Wavelength 8 Pages .Determination of Sulfur Content of Automotive Fuels .Dispersive X-ray Fluorescence Spectrometry Gr 1 This standard specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 20884 : 2004Ψ 75.External Coatings for Buried or Submerged Pipelines used in Pipeline Transportation SystemsPart 2: Polyethylene Coating (2-Layer PE ) Gr.200 Published by GSA in 2011 Petroleum and Natural Gas Industries .External Coatings for Buried or Submerged Pipelines used in Pipeline Transportation Systems : Part 3: Field Joint Coatings Gr.060 Published by GSA in 2007 Wheat and Wheat Flour -Gluten Content Part 4 : Determination of Dry Gluten from 6 Pages Wet Gluten by a Rapid Drying Method Gr 1 This standard specifies a rapid method for the determination of the dry gluten content from wet gluten obtained as specified in either ISO 21415-1 or ISO 21415-2. homogeneous automotive fuels from 5 mg/kg to 500 mg/kg. __________________________________________________________________________________________ GS ISO 21415-4 : 2006Ψ 67. The method can also be used to determine the moisture content of the wet gluten. testing and handling of materials for plant application of single-layer fusion-bonded epoxy coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 21809-2 : 2009Ψ 75. inspection.Gluten Content .080 Published by GSA in 2007 Petroleum Products . handling and storage of materials for plant application of two-layer polyethylene coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 21809-3 : 2008Ψ 75. 4 37 Pages The standard specifies the requirements for qualification. application.200 Published by GSA in 2011 Petroleum and Natural Gas Industries . application. dry gluten is obtained from wet gluten by drying in an oven. __________________________________________________________________________________________ GS ISO 21329 : 2004Ψ 75.060 Published by GSA in 2007 Wheat and Wheat Flour .Part 3 : Determination of Dry Gluten from Wet Gluten by an Oven Drying Method 6 Pages Gr 1 This standard specifies a method for the determination of the dry gluten content from wet gluten obtained as specified in either ISO 21415-1 or ISO 21415-2. 9 81 Pages This standard specifies requirements and provides guidance for the testing of mechanical connectors for use in pipeline transportation systems for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 21415-3 : 2006Ψ 67.200 Published by GSA in 2011 Petroleum and Natural Gas Industries . 4 34 Pages The standard specifies the requirements for qualification.Test Procedures for Mechanical Connectors Gr.The method can also be used to determine the moisture content of the wet gluten.Pipeline Transportation Systems . 20 Pages This standard is applicable to pressure-relieving and vapour-depressuring systems.Fabrics .External Coatings for Buried or Submerged Pipelines used in Pipeline Transportation Systems : Part 4: Polyethylene Coatngs (2-Layer PE) Gr.200 Published by GSA in 2011 Petroleum and Natural Gas Industries . 3 27 Pages This standard presents general principles and gives requirements and recommendations for the selection and qualification. liquefied natural gas (LNG) facilities and oil and gas production facilities. __________________________________________________________________________________________ 291 .180.30 .180. and gives guidance for the quality assurance. of non-matallic materials for service in equipment used in oil and gas production environments. 4 34 Pages This standard specifies requirements for qualification.30 5 Pages Gr 1 This standard specifies a method for the determination of length and width of textile fabrics that are in a tension-free relaxed state.Determination of Width and Length 59. application. __________________________________________________________________________________________ GS ISO 23251 : 2006Ψ 75. but no longer than 100m.Pressure-Relieving and Depressuring Systems192 Gr.Requirements for any Organization in the Food Chain 32 Pages Gr 4 This standard specifies requirements for a food safety management system where an organization in the food chain needs to demonstrate its ability to control food safety hazards in order to ensure that food is safe at the time of human consumption __________________________________________________________________________________________ GS ISO 22198 : 2006Ψ Published by GSA in 2005 Textiles . exposed to ambient temperatures.Non-Metallic Materials in Contact with Media Related to Oil and Gas Production : Part 1: Thermoplastics Gr.20 Published by GSA in 2011 Petroleum.080.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 21809-4 : 2009Ψ 75. 75. The test is applicable to textile fabrics of full width. procedure and test at manufacture of transportable refillable welded steel liquefied petroleum gas (LPG) cylinders of water capacity up to and including 150 l. Petrochemical and Natural Gas Industries . __________________________________________________________________________________________ GS ISO 23936-1 : 2009Ψ 77.020. construction and workmanship.Although intended for use primarily in oil refineries.200 Published by GSA in 2007 Gas Cylinders — Transportable Refillable Welded Steel Cylinders for Liquefied Petroleum Gas (LPG) — Design and Construction 31 Pages Gr 4 This standard specifies minimum requirements concerning material. design. handling and storage of materials for plant application of two-layer polyethylene coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries __________________________________________________________________________________________ GS ISO 22000 : 2005Ψ 67. inspection.01 Published by GSA in 2011 Petroleum. or in tubular form. It is also applicable to petrochemical facilities. gas plants. testing. __________________________________________________________________________________________ GS ISO 22991 : 2004Ψ 23.020 Published by GSA in 2005 Food Safety Management Systems . Petrochemical and Natural Gas Industries. where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. folded length wise down the middle. 13.30.30 Published by GSA in 2008 Activities Related to Drinking Water and Wastewater Services .Safety Related Minimum Requirements for the Training 11 Pages of Recreational Scuba Divers Part 3: Level 3 -m Dive Leader Gr 2 This standard specifies the competencies that a scuba instructor has to have achieved in order for a training organization to award the scuba instructor certification indicating that he has met or exceeded scuba instructor level 3 ..30. Requirements and Test Conditions 79 Pages Gr 8 the standard specifies requirements for the construction.30 .080.200 Published by GSA in 2008 Recreational Diving Services .080.Safety Related minimum Requirements for the training of Recreational scuba Divers Part 2 : Levels 2. 03.200 Published by GSA in 2008 Recreational Diving Services . as well as classification of the cabinets.Autonomous Diver 14 Pages Gr 2 The standard specifies the competencies that a scuba diver has to have achieved in order for a training organisation to award the scuba diver certification indicating that he has met or exceeded scuba diver level 2"Autonomous diver" and assessment of these competencies __________________________________________________________________________________________ GS ISO 24801-3 : 2007Ψ 03. characteristics and performance of refrigerated display cabinets used in the sale and display of food stuffs.Supervised Diver Gr 2 The standard specifies the competencies that a scuba diver has to have achieved in order for a training organization to award the scuba diver certification indicating that he has met or exceeded scuba diver level 1"supervised diver" and specifies assessment of these competencies __________________________________________________________________________________________ GS ISO 24801-2 : 2007Ψ 03.Safety Related Minimum Requirements for the Training of Scuba Instructors Part 1: Level 1 8 Pages Gr 1 This standard specifies the competencies that a scuba instructor has to have achieved in order for a training organization to award the scuba instructor certification indicating that he has met or exceeded scuba instructor level 1 and specifies assessment of these competencies.Safety Related Minimum Requirements for the Training 11 Pages of Recreational scuba Divers Part 1: Level 1 . __________________________________________________________________________________________ 292 .060. 03.30.03. 03.Dive leader and specifies assessment of these competencies.03. __________________________________________________________________________________________ GS ISO 24802-1 : 2007 03. It also provides guidance on how to identify users’ needs and expectations and how to assess whether they are being met.130. __________________________________________________________________________________________ GS ISO 24801-1 : 2007Ψ 03.080.Guidelines for the 62 Pages Assessment and for the Improvement of the Service to Users Gr 7 This standard specifies the elements of drinking water and waste water services of relevance and interest to users.080.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 23953-2 : 2005Ψ 97.20 Published by GSA in 2008 Refrigerated Display Cabinets Part 2: Classification.30 . It also specifies test conditions and methods for checking that the requirements have been satisfied.200 Published by GSA in 2008 Recreational Diving Services . their marking and the list of their characteristics to be declares by the manufacturer.30.080.200 Published by GSA in 2008 Recreational Diving Services . __________________________________________________________________________________________ GS ISO 24510 : 2007Ψ 03. rental of diving equipment __________________________________________________________________________________________ GS ISO 24817 : 2006Ψ 75. __________________________________________________________________________________________ GS ISO 26000 : 2010Ψ Published by GSA in 2011 Guidance on Social Responsibility 03. specification. GS ISO 24802-2 : 2007Ψ 03. Petrochemical and Natural Gas Industries .20 Published by GSA in 2011 Petroleum. Installation. 03.30 . operation and maintenance of flares and related combustion and mechanical components used in pressure-relieving and vapour-depressuring systems for petroleum. installation.100.200 Published by GSA in 2008 Recreational Diving Services . organized and guided diving for certified divers.Requirements for Recreational scuba Diving Services 8 Pages Providers Gr 1 The standard specifies requirements for service providers in the field of recreational scuba diving. regardless of their size or location on (a) Concepts.Composite Repairs for Pipework 68 Pages . design. petrochemical and natural gas industries.01 84 Pages Gr. trends and characteristics of social responsibility ( c) Principles and practicea ralating to social responsibility (d) The core subjects and issues of social responsibility __________________________________________________________________________________________ GS ISO 28000 : 2007Ψ Published by GSA in 2005 Specification for Security Management Systems for the Supply Chain 47.Flare Details for General 155 Pages Refinery and Petrochemical Service Gr. terms and definitions related to social responsibility (b) The background.200 Published by GSA in 2008 Recreational Diving Services .16 This standard specifies requirements and provides guidance for the selection. 03.Safety Related Minimum Requirements for the Training 9 Pages of Scuba Instructors Part 2: Level 2 Gr 1 This standard specifies the competencies that a scuba instructor has to have achieved in order for a training organization to award the scuba instructor certification indicating that he has met or exceeded scuba instructor level 2 and specifies assessment of these competencies. It specifies three areas of service provision: training and education. petrochemical and natural gas industries __________________________________________________________________________________________ GS ISO 25457 : 2008Ψ 75.180.20 Published by GSA in 2011 Petroleum. Petrochemical and Natural Gas Industries .020.30. including those aspects critical to security assurance of the supply chain __________________________________________________________________________________________ 293 .99 16 Pages Gr 2 Specifies the requirements for a security management system. testing and inspection for the external application of composite repairs to corroded or damages pipework use in the petroleum. 9 This standard provides guidance to aii types of organizations.180. __________________________________________________________________________________________ GS ISO 24803 : 2007Ψ 03. Testing and Inspection Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 03.100.080.Qualification and Design.30.080. 7 This technical specification gives requirements and recommendations for the qualification and design. Part 15 : Programming Languages 01. __________________________________________________________________________________________ GS ISO IEC 2382-15 : 1999Ψ Published by GSA in 2010 Information Technology .Part 4 : Organization of Data 01.040. It also present terms and definitions of selected concepts relevant to the field of information technology and identifies relationships among the entries __________________________________________________________________________________________ GS ISO IEC 2382-4 : 1999Ψ Published by GSA in 2010 Information Technology .30 26 Pages Gr 3 This standard facilitate international communication in information technology.Part 29 : Artificial Intelligence .Speech Recognition and Synthesis 22 Pages Gr 3 This standard facilitate international communication in information technology.Part 8 : Security 01.35.35.020 Published by GSA in 2010 Information Technology .35. 35.Vocabulary .240.Vocabulary . It present terms and definitions of selected concepts relevant to the field of information technology and identifies relationships among the entries __________________________________________________________________________________________ GS ISO IEC 2382-5 : 1999Ψ Published by GSA in 2010 Information Technology .Part 5 : Representation of Data 01.020 38 Pages Gr 4 This standard is intended to facilitate international communication in information technology. 35.020 24 Pages Gr 3 The standard facilitate international communication in computer programming. It present terms and definitions of selected concepts relevant to the field of information technology and identifies relationships among the entries __________________________________________________________________________________________ GS ISO IEC 2382-17 : 1999Ψ Published by GSA in 2010 Information Technology .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO 28300 : 2008Ψ 75.060 46 Pages Gr 5 The standard facilitate international communication in computer programming. 35.040.040.202 22 Pages Gr 3 The standard facilitate international communication in information technology. It also presents terms and definitions of selected concepts relevant to the field of information technology and identifies relationships among the entries __________________________________________________________________________________________ GS ISO IEC 2382-29 : 1999Ψ 01.35.Vocabulary .Vocabulary . It presents terms and definitions of selected concepts relevant to the field of information technology and identifies relationships among the entries __________________________________________________________________________________________ GS ISO IEC 2382-8 : 1998Ψ Published by GSA in 2010 Information Technology .Vocabulary .040.Vocabulary .040. It also presents terms and definitions of selected concepts relevant to the field of information technology and identifies relationships among the entries __________________________________________________________________________________________ 294 . 35.180.Venting of Atmospheric and LowPressure Storage Tanks 76 Pages Gr.20 Published by GSA in 2011 Petroleum.Part 17 : Databases 01.040. Petrochemical and Natural Gas Industries.35. 35. 35. 8 The standard covers the normal and emergency vapour venting requirements for aboveground liquid petroleum or petroleum products storage tanks and aboveground and underground refrigerated storage tanks designed as atmospheric storage tanks or low-pressure storage tanks.35. recommendations and guidelines for the systematic measurement.Part 2 : Planning 12Pages and Management Gr 2 This standard provides requirements.080 Published by GSA in 2010 Information Technology .Part 7 : Computer Programming 01.2 This standard provides requirements and recommendations for the practical implementation of software product evaluation when the evaluation is conducted in parallel with the development and carried out by the developer __________________________________________________________________________________________ GS ISO IEC 14598-4 : 1999Ψ 35. recommendations and guidelines for a supporting function which is responsible for the management of software product evaluation and for technologies necessary for software product evaluation __________________________________________________________________________________________ GS ISO IEC 14598-3 : 2000Ψ 35.Software Life Cycle Processes 35. __________________________________________________________________________________________ GS ISO IEC 14598-5 : 1998Ψ 35. with well-defined terminology.040. contains general requirements for specification and evaluation of software quality and clarifies the general concepts __________________________________________________________________________________________ GS ISO IEC 14598-2 : 2000Ψ 35. It defines the technical terms used in the other parts.Part 5 : Process for Evaluators 35 Pages Gr 4 This standard provides requirements and recommendations for the practical implementation of software product evaluation when several parties need to understand.080 Published by GSA in 2010 Information Technology .Product Evaluation . __________________________________________________________________________________________ GS ISO IEC 14598-1 : 1999Ψ 35.Software Engineering .Software Product Evaluation .Software Engineering . or modifications to existing software products.Part 1 : General Overview 19 Pages Gr 2 This standard provides an overview of the other parts.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO IEC 2383-7 : 2000Ψ Published by GSA in 2010 Information Technology .Part 4 : Process for Acquirers Gr 4 34 Pages The standard contains requirement. that can be referenced by software industry. custom software products. It present terms and definitions of selected concepts relevant to the field of information technology and identifies relationships among the entries __________________________________________________________________________________________ GS ISO IEC 12207 : 2008Ψ Published by GSA in 2010 Systems and Software Engineering .080 122 Pages Gr 13 The standard establishes a common framework for software life cycle processes. It contains processes.Software Product Evaluation .080 Published by GSA in 2010 Information Technology .Part 3 : Process 16 Pages for Developers Gr.Vocabulary .Software Engineering .Product Evaluation . accept and trust evaluation results __________________________________________________________________________________________ 295 .080 Published by GSA in 2010 Information Technology . assessment and evaluation of software product quality during acquisition of "off-the-shelf" software products.35 79 Pages Gr 8 The standard facilitate international communication in computer programming.-080 Published by GSA in 2010 Information Technology .Product Evaluation . activities and tasks that are to be applied during the acquisition of a software product. verification of conformity.Product Evaluation .080 Published by GSA in 2010 Information Technology .Process Assessment . control and improvement of the life cycle processes used within an organization or a project __________________________________________________________________________________________ GS ISO IEC 15289 : 2006Ψ 35. __________________________________________________________________________________________ GS ISO IEC 15288 : 2008Ψ Published by GSA in 2010 Systems and Software Engineering .080 Published by GSA in 2010 Information Technology .Process Assessment .System Life Cycle Processes 35.Process Assessment .Content of Systems and Software Life Cycle Process Information Products ( Documentation) Gr 6 51 Pages This standard defines an information management process. and provides guidance for their selection and use. __________________________________________________________________________________________ GS ISO IEC 15504-3 : 2004Ψ 35.Part 5 : An Exemplar Process 162 Pages Assessment Model Gr 17 This standard define an exemplar process assessment model that meets the requirement and supports the performance of an assessment by providing indicators for guidance on the interpretationof the process purpose and outcomes __________________________________________________________________________________________ 296 . It also0 provides an overview of process assessment and interprets the requirements through the provision of guidance on competency of assessors.080 Published by GSA in 2010 Information Technology .Process Assessment . It identifies the purpose and content of all identified systems and software life cycle information items __________________________________________________________________________________________ GS ISO IEC 15504-1 : 2004Ψ 35. It also provides processes that support the definition.080 Published by GSA in 2010 Information Technology . __________________________________________________________________________________________ GS ISO IEC 15504-5 : 2006Ψ 35.Part 4 : Guidance on use for Process 33Pages Improvement and Process Capability Determination Gr 4 The standard provides guidance on how to utilize a conformant process assessment within a process improvement programme or a process capability determination.Part 1 : Concepts and Vocabulary 19 Pages Gr 2 The standard provide overall information on the concepts of process assessment and its use in the two contexts of process improvement and process capability determination. It describes how the parts of the suite fit together. __________________________________________________________________________________________ GS ISO IEC 15504-4 : 2004Ψ 35.080 Published by GSA in 2010 Software Engineering .080 Published by GSA in 2010 Systems and Software Engineering . performing an assessment.080 70 Pages Gr 7 The standard defines a set of processes and associated terminology. selecting and using assessment tools etc.Part 3 : Guidance on Performing an 54 Pages Assessment Gr 6 This standard provides guidance on meeting the minimum set of requirements for performing an assessment.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO IEC 14598-6 : 2001Ψ 35.Part 6 : Documentation of Evaluation Modules 31 Pages Gr 4 The standard defines the structure and content of the documentation to be used to describe an evaluation module. Software User Documentation Process 52 Pages Gr 6 This standard specifies the minimum process for creating all forms of user documentation for software which has a user interface __________________________________________________________________________________________ GS ISO IEC 18019 : 2004Ψ 35. The purpose of this guide is to provide general overview of Square content.080 Published by GSA in 2010 Software Engineering . As well as a framework for use by suppliers of service management tools __________________________________________________________________________________________ GS ISO IEC 25000 : 2005Ψ 35.Software Product Quality Requirements and Evaluation ( SQUARE) . and gives a common basis for improvements in services.Measurement Reference Model and Guide Gr 2 This standard contains the criteria for selecting software quality measures and quality measure elements.080 Published by GSA in 2010 Information Technology .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO IEC 15910 : 1999Ψ 35.020 Published by GSA in 2010 Information Technology .020 Published by GSA in 2010 Information Technology . tools.Service Management . It also describes how to establish what information users need. common reference models and definitions.Software Product Quality Requirements and Evaluation 15 Pages (SQUARE) .Planning and Management 15 Pages Gr 2 This standard provides requirements and recommendations for an organization responsible for implementing and managing the software product quality requirements specification and software quality evaluation activities through the provision of technology.99.080 Published by GSA in 2010 Software and System Engineering .080 Published by GSA in 2010 Software Engineering . demonstrating predictive validity and assessing measurement reliability. It also recommends that service providers should adopt common terminology and a more consistent approach to service management. 35.99.Part 2: Code of Practice 34 Pages Gr 4 This standard represents an industry consensus on quality standards for IT service management processes.Software Product Quality Requirements and Evaluation ( SQUARE) . 35. as well as the relationship among the documents.Part 1 : Specification 16 Pages Gr 2 This standard defines the requirements for a service provider to deliver managed services of an acceptable quality for its customers __________________________________________________________________________________________ GS ISO IEC 20000-2 : 2005Ψ 03. experiences and management skills __________________________________________________________________________________________ GS ISO IEC 25020 : 2007Ψ 35.Guidelines for the Design and Preparation of User 146 Pages Documentation for Application Software Gr 15 This standard gives guidelines for the design and preparation of user documentation for application software. __________________________________________________________________________________________ GS ISO IEC 25001 : 2007Ψ 353.080 Published by GSA in 2010 Information Technology .Services Management . according to their purpose of use.Guide to SQUARE 41 Pages Gr 5 This standard provides guidance for the use of the new series of international standards named Software products Quality Requirements and Evaluation(Square). how to determine the way in which that information should be presented to the users __________________________________________________________________________________________ GS ISO IEC 20000-1 : 2005Ψ 03. example format for documenting software quality measures __________________________________________________________________________________________ 297 . allowing users of the guide a good understanding of those series of standards.080.080. the -shelf software products.Security Techniques . and improving information security management in an organization __________________________________________________________________________________________ 298 . __________________________________________________________________________________________ GS ISO IEC 27002 : 2005Ψ 35.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO IEC 25030 : 2007Ψ 35.Software Engineering .Software Engineering . implementing.Software Product Quality Requirements and Evaluation( SQUARE) .3 This standards establishes quality requirements for commercial off.040 Published by GSA in 2010 Information Technology . implementing. complete.080 Published by GSA in 2010 Information Technology . operating.Information Security Management 19 Pages Systems . efficiency and satisfaction in a specified context of use __________________________________________________________________________________________ GS ISO IEC 26514 : 2008Ψ 35.Software Product Quality Requirements and Evaluation (Square) .Security Techniques .Quality Requirements 34 Pages Gr 4 This standard provides requirements and recommendation for the specification of software product quality requirements.the -shelf (COTS) Software Product and Instructions for Testing 27 Pages Gr.Overview and Vocabulary Gr 2 This standard provides an overview of the ISMS family standards.Security Techniques . maintaining and improving a documented ISMS within the contextof the organisation's overall business risks.040 Published by GSA in 2010 Information Technology .080 Published by GSA in 2010 Systems and Software Engineering .Requirements Gr 4 This standard covers all types of organisations.Common Industry Format (CIF) for Usability Test Reports Gr 5 46 Pages The standard is intended to be used to report the measures obtained from a test of usability as defined for its effectiveness.Software Engineering .040 Published by GSA in 2010 Information Technology . terms and definitions for use in the ISMS standards and an introduction to information security management systems __________________________________________________________________________________________ GS ISO IEC 27001 : 2005Ψ 35.080 Published by GSA in 2010 Information Technology . instruction for conformity evaluation of the software products __________________________________________________________________________________________ GS ISO IEC 25062 : 2006Ψ 35. reviewing. maintaining. accurate.Information Security Management 34 Pages Systems .080 Published by GSA in 2010 Information Technology .Code of Practice for Information 115 Pages Security Management Gr 12 This standard gives guidelines and general principles for initiating. and usable documentation. It also applies to organisations in their role as both acquirer and suppliers __________________________________________________________________________________________ GS ISO IEC 25051 : 2006Ψ 35. monitoring. It describes how to establish what information users need. how to determine the way in which that information should be presented to the users __________________________________________________________________________________________ GS ISO IEC 27000 : 2009Ψ 35.It specifies the requirements for establishing.Software Product Quality Requirements and Evaluation (Square) -Requirement for Quality of Commercial off.Requirements for Designers and Developers of User Documentation 143 Pages Gr 15 This standard supports the interest of software users in consistent. Guidelines for the Application of ISO 54 Pages 9001: 2000 to Computer Software Gr 6 This standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to consistently provide product that meets customers and applicable regulatory requirements. It is designed to assist the satisfactory implementation of information security based on risk management approach __________________________________________________________________________________________ GS ISO IEC 27006 : 2007Ψ 35.080 Published by GSA in 2010 Information Technology .Review of available Methods of Analysis 42 Pages Gr 5 This technical report aims to facilitate reference to the available Ghana Standard method(s) for the determination of required element(s) in steel and iron __________________________________________________________________________________________ 299 .10. __________________________________________________________________________________________ GS ISO IEC 27011 : 2008Ψ 35.080 Published by GSA in 2010 Information Technology . It is also intended to support the accreditation of certification bodies providing ISMS certification.080 Published by GSA in 2010 Information Technology .Information Security Risk Management 55 Pages Gr 6 The standard provides guidelines for information security risk management. __________________________________________________________________________________________ GS ISO IEC TR 15504-6 : 2008Ψ 35. and aims to enhance customer satisfaction through the effective application of the system.040 Published by GSA in 2010 Information Technology .Software Engineering .Requirements for bodies Providing Audit 36 Pages and Certification of Information Security Management Systems Gr 4 This standard specifies requirements and provides guidance for bodies providing audit and certification of an information security management system.Software Engineering .Part 6: An Exemplar system Life Cycle Process Assessment Model 118 Pages Gr 12 This standard defines an exemplar process assessment model that meets the requirements and supports the performance of an assessment by providing indicators for guidance on the interpretation of the process purposes and outcomes.040 Published by GSA in 2010 Information Technology . and process attributes __________________________________________________________________________________________ GS ISO IEC TR 25021 : 2007Ψ 35.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO IEC 27005 : 2008Ψ 35.Information Security Management 44 Pages Guidelines for Telecommunications Organizations Based on ISO/IEC 27002 Gr 5 The standard define guidelines supporting the implementation of information security management in telecommunications organizations __________________________________________________________________________________________ GS ISO IEC 90003 : 2004Ψ 03.Software Product Quality 59 Pages Requirements and Evaluation ( SQUARE) . 35.040 Published by GSA in 2010 Information Technology .Security Techniques .Security Techniques .Security Techniques .120.Quality Measurements Gr 6 This technical report specifies an initial set of quality measure elements in order to assist users of the Square series of quality measurement standards in the selection and use of the quality measures for software product quality evaluation and in the selection of the entities to be measured in the software product lifecycle __________________________________________________________________________________________ GS ISO TR 9769 : 1991Ψ 25.40 Published by GSA in 2008 Steel and Iron .220.Process Assessment . Operations. 30 This standard illustrates the equations and templates necessary to calculate the various pipe properties . boys. __________________________________________________________________________________________ GS ISO TR 10652 : 1991 Published by GSA in 2007 Textiles . Tubing.Guide to Material Selection with Regard to 5 Pages Internal Corrosion Gr 1 This standard provides a discussion of the parameters that have a bearing on the internal corrosion of solar water heating systems __________________________________________________________________________________________ GS ISO TR 10400 : 2007Ψ 75.Standard Sizing Systems for Clothes 61.160 15 Pages Gr 2 The standard give recommended practice for the use of field pyranometers in solar energy applications __________________________________________________________________________________________ GS ISO TR 10217 : 1989Ψ 27.10 Published by GSA in 2011 Petroleum and Natural Gas Industries .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO TR 9901 : 1990Ψ Published by GSA in 2007 Solar Energy . 3 This standard establishes a body sizing system to be used for compiling standard garment sizes for infants. men.160 Published by GSA in 2007 Solar Energy .men.39.Drilling and Production EquipmentPart 2: Deepwater Drilling Riser Methodologies. Drill Pipe and Line Pipe used as Casing or Tubing Gr.womenand girls.Equations and Calculations for the Properties of 229 Pages Casing.020 25 Pages Gr.060 15 Pages Gr 2 This standard specifies the terminology and classification to be used for the grading and description of polished diamonds __________________________________________________________________________________________ GS ISO TR 13624-2 : 2009Ψ 75.040.Recommended Practice for use 27. and Integrity Technical 89 Pages Report Gr.Standard Sizing Systems for Clothes 61. __________________________________________________________________________________________ GS ISO TR 11211 : 1995Ψ Published by GSA in 2006 Grading Polished Diamonds .020 26 Pages Gr 3 This technical report establishes a body sizing system to be used for compiling standard garment sizes for Infants. 39.Field Pyranometers . 9 This standard pertains to mobile offshore drilling units that employ a subsea BOPstack deployed at the seafloor.180. women and girls __________________________________________________________________________________________ GS ISO TR 10652 : 1991Ψ Published by GSA in 2007 Textiles .Terminology and Classification 01. __________________________________________________________________________________________ 300 .boys.Water Heating Systems .180.10 Published by GSA in 2011 Petroleum and Natural Gas Industries . CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ISO TS 4949 : 2003Ψ Published by GSA in 2008 Steel Names Based on Letter symbols 77.Requirements for Product and Service Supply Organizations Gr.00 . Testing and Inspection Gr 7 This technical specification gives requirements and recommendations for the qualification and design.140. petrochemical and natural gas industries __________________________________________________________________________________________ GS ISO TS 29001 : 2010Ψ 03. chemical) so as to provide an abbreviated identification of steel grades. 4 This standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to consistently provide product that meets customers and applicable statutory and regulatory requirements.20 Published by GSA in 2005 General Requirements for the Competence of Testing and Calibration Laboratories 28 Pages Gr 3 Specifies the general requirements for the competence to carry out tests and/or calibrations.20 Published by GSA in 2008 Guidelines Drafting of Standards Suitable for use for Conformity Assessment 4 Pages Gr 1 This standard set out guidelines to assist committees in drafting standards suitable for use for conformity assessment of products. Petrochemical and Natural Gas Industries.Guidance on the Application for 22000 : 2005 13 Pages Gr 2 This technical specification provides generic guidance that can be applied in the use of GS ISO 22000. The guidelines contained herein may also be used as appropriate for the drafting of standards intended for conformity assessment of processes and services. 03.10 .Composite Repairs for Pipework .120.120. __________________________________________________________________________________________ GS ISO/IEC GUIDE 7 : 1994Ψ 01. Installation. Whilst it is directed specifically to conformity with standards.120.20 Published by GSA in 2011 Petroleum.120. and aims to enhance customer satisfaction through the effective application of the system __________________________________________________________________________________________ GS ISO/IEC 17025 : 2005Ψ 03. __________________________________________________________________________________________ GS ISO TS 22004 : 2005Ψ 67. installation. __________________________________________________________________________________________ 301 . __________________________________________________________________________________________ GS ISO TS 24817 : 2006Ψ 75.180.20 Published by GSA in 2008 Methods of Indicating Conformity with Standards for Third-Party Certification Systems 4 Pages Gr 1 This guide lays down methods of indicating conformity with standards and reference thereto in standards.020 Published by GSA in 2005 Food Safety Management System .020 Published by GSA in 2011 Petroleum. __________________________________________________________________________________________ GS ISO/IEC GUIDE 23 : 1982Ψ 03. physical. mechanical. Petrochemical and Natural Gas Industries .Qualification and 68 Pages Design.Sector-Specific Quality 31 Pages Management Systems . including sampling.120. testing and inspection for the external application of composite repairs to corroded or damaged pipework used in the petroleum.01 9 Pages Gr 1 This technical specification sets out rules for the designation of internationally standardized steel grades by means of symbolic letters and numbers to express application and principal characteristics(e. it is recognized that it may be equally applicable to conformity with other technical specification.g. 75. __________________________________________________________________________________________ GS ISO/IEC GUIDE 28 : 2004Ψ 03.20 Published by GSA in 2008 General Requirements for Bodies Operating Product Certification Systems 8 Pages Gr 1 This guide specifies general requirements that a third-party operating a product certification system shall meet if it is to be recognized as competent and reliable __________________________________________________________________________________________ GS ISO/IEC GUIDE 67 : 2004Ψ Published by GSA in 2008 Conformity Assessment. or both. .200 19 Pages Gr 2 The standard specifies the determination of the technical performance of a refrigerating system __________________________________________________________________________________________ 302 . and surveillance by testing of product samples taken from the factory or the open market. establish or compare third-part product certification systems __________________________________________________________________________________________ GS ISO/R 916 : 1968Ψ Published by GSA in 2008 Testing of Refrigerating Systems 27.120 5 Pages Gr 1 This guide gives the general recommendations to be taken into consideration when determining the most suitable type of packaging to be used at the point of sale to protect goods. It is applicable to a third party product certification system for determining the conformity of a product with specified requirement through initial testing of samples of the product.20 9 Pages Gr 1 This guide gives guidance on product certification systems by identifying their various elements based on current practices.120.Recommendations for Addressing Consumer Needs 01.120. __________________________________________________________________________________________ GS ISO/IEC GUIDE 41 : 2003Ψ Published by GSA in 2006 Packaging .20 Published by GSA in 2008 Conformity Assessment. develop.20 5 Pages Gr 1 This guide recommends good practices for all elements of conformity assessment. assessment and surveillance of the involved quality system.120.120.Fundamentals of Product Certification 03. schemes and results __________________________________________________________________________________________ GS ISO/IEC GUIDE 65 : 1996Ψ 03.20 GS ISO/IEC GUIDE 27 : 1983Ψ Published by GSA in 2008 Guidelines for Corrective Action to be taken by a Certification Body in the event of misuse of its Mark of conformity 5 Pages Gr 1 This standard identify a series of procedures which a national certification body (non-governmental) should consider in deciding how to respond to a reported misuse of its registered mark of conformity. or a situation in which a certified product is subsequently found to be hazardous. It is intended for use by product certification bodies and other interested parties wishing to understand.Guidance on a Third-Party certification System for Product 19 Pages Gr 2 This guide gives general guidelines for a specific product certification system. including normative documents.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 03. systems.Code of Good Practice 03. __________________________________________________________________________________________ GS ISO/IEC GUIDE 60 : 2004Ψ Published by GSA in 2008 Conformity Assessment .120. bodies. Call Routing and Connection Routing Methods Gr. 351 : 2000Ψ 33.Operation. __________________________________________________________________________________________ GS ITU-T E. Routing and Mobile Services .Dynamic Routing Interworking Gr.QOS Routing and Related Traffic Engineering 30 Pages Methods . 5 50 Pages The standard addresses routing methods and information exchange needed within and between TDM-. and broadband ISDN networks.030 Published by GSA in 2011 Series E: Overall Network Operation. Numbering.International Routing Plan .030 Published by GSA in 2011 Series E: Overall Network Operation. 350 : 2000Ψ 33.The International Identification Plan for Public Networks and Subscriptions Gr. 5 The standard gives a framework for dynamic routing interworking in circuit-switched PSTN. 3 This standard describes. Telephone Service. 212 : 2008Ψ 33. 330 : 2003Ψ 33. 1 This standard describes the general aspects of user control of ISDN support services.030 Published by GSA in 2011 Series E: Overall Network Operation.Routing of Multimedia connections across TDM-.ISDN Provisions Concerning Users .Operation Numbering. and QoS routing.030 Published by GSA in 2011 Series E: Overall Network Operation. route selection. It illustrates the functionality for setting up a call from an originating exchange in one network to a destination exchange in another network.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T E.030 Published by GSA in 2011 Series E: Overall Network Operation. __________________________________________________________________________________________ GS ITU-T E.and IP.Routing Guidelines for Efficient Routing Methods Gr. Service Operation and Human Factors . 352 : 2000Ψ 33. __________________________________________________________________________________________ GS ITU-T E. __________________________________________________________________________________________ 303 . Routing and Mobile Services . narrow-band ISDN. and recommends methods which control a network's response to traffic demands and other stimuli.based network and routing technology __________________________________________________________________________________________ GS ITU-T E. Telephone Service.User Control of ISDN .Supported Services Gr. Telephone Service.International Routing Plan .ISDN Provisions Concerning Users .040 Published by GSA in 2011 Series E: Overall Network Operation. Service Operation and Human Factors . Service Operation and Human Factors . 2 The standard define a unique international identification plan for public fixed and mobile networks providing users with access of public telecommunication services __________________________________________________________________________________________ GS ITU-T E. Telephone Service. and IP. Routing and Mobile Services . such as link failures or node failures. Service Operation and Human Factors . Telephone Service. ATM-. ATM.Based Networks Gr.International Routing Plan . 360-2 : 2002Ψ 33. Routing and Mobile 3 Pages Service . Service Operation and Human 43 Pages Factors . Service Operation and Human Factors Operation Numbering. and IP-Based networks and makes particular recommendations on bandwidth reservation. analyzes. 2 The standard provides guidelines for the design of routing methods within TDM-.Telephone Network and ISDN Operation. ATM-.Maritime Mobile Service and Public Land Mobile 19 Pages Service . Numbering.International Operation .ISDN Provisions 17 Pages Concerning Users . Telephone Service. using one or more dynamic routing methods in conjunction possibly with fixed routing. Network Management and Traffic Engineering . Telephone Service. Telephone Service. Telephone Service.Quality of Service. 1 This standard make recommendations considering traffic intensity measurements for traffic systems consisting of a pool of resources and random arrival events that require the use of some amount of resources from the pool for some period of time __________________________________________________________________________________________ 304 .Telephone Network and ISDN . Network Management and Traffic Engineering . Telephone Service.Routing Table Management Methods and Requirements Gr.Telephone Network and ISDN . 493 : 1996Ψ 33. 492 : 1996Ψ 33.Measurement and Recording of Traffic . analyzes.Traffic Reference Period Gr. 490-1 : 2003Ψ 33. Service Operation and Human 7 Pages Factors . Telephone Service.QOS Routing and Related Traffic Engineering 26 Pages Methods . 360-4 : 2002Ψ Published by GSA in 2011 Series E: Overall Network Operation. __________________________________________________________________________________________ GS ITU-T E. normal load and high load for the purpose of collecting measurements for monitoring Grade of Service (GOS) for networks and network components __________________________________________________________________________________________ GS ITU-T E. Service Operation and Human 12 Pages Factors .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 33.Quality of Service.Measurement and Recording of Traffic .International Routing Plan . 2 It provides an overview of the recommendations on traffic engineering. such as link failures or node failures.040 Published by GSA in 2011 Series E: Overall Network Operation.Traffic Measurement and Evaluation .Traffic 10 Pages Engineering . 490 : 1992Ψ 33.Traffic Intensity Measurement Principles Gr. Telephone Service.040 Published by GSA in 2011 Series E: Overall Network Operation. Service Operation and Human Factors . 1 This standard is aimed at forming a framework for the recommendations on traffic measurement and evaluation and also to give a general understanding of the use of traffic management and to give guidance on the E-Series recommendations on application of traffic data in planning and operating a telecommunication network __________________________________________________________________________________________ GS ITU-T E. 1 The standard provides definition of traffic reference periods.040 Published by GSA in 2011 Series E: Overall Network Operation. Service Operation and Human Factors .Quality of Service. and recommends methods which control a network's response to traffic demands and other stimuli.030 GS ITU-T E.040 Published by GSA in 2011 Series E: Overall Network Operation.Telephone Network and ISDN .Grade of Service (GOS) Monitoring Gr. 3 This standard describes. Service Operation and Human Factors .040 Published by GSA in 2011 Series E: Overall Network Operation. 2 The standard makes recommendations covering the monitoring for traffic related Grade of Service parameters in fixed and mobile telecommunications networks __________________________________________________________________________________________ GS ITU-T E. Service Operation and Human Factors . Network Management and Traffic Engineering .Traffic Engineering .Quality of Service. Network Management and Traffic Engineering . and routing table management __________________________________________________________________________________________ GS ITU-T E.Overview of 17 Pages Recommendations on Traffic Engineering Gr. 500 : 1998Ψ 33.General Survey 3 Pages Gr. Estimation of Traffic Offered in the Network Gr.Traffic Measurement Administration Gr 1 The standard include the scheduling and control of traffic data collection. Telephone Service. Telephone Service.Traffic 25 Pages Engineering .040 Published by GSA in 2011 Series E: Overall Network Operation. __________________________________________________________________________________________ GS ITU-T E.040 Published by GSA in 2011 Series E: Overall Network Operation.040 Published by GSA in 2011 Series E: Overall Network Operation. Network Management and Traffic Engineering . Service Operation and Human Factors .Quality of Service. Service Operation and Human Factors . Network Management and Traffic Engineering . 1 The standard aim of traffic measurement is to provide data that can be used by an administration for planning. 501 : 1997Ψ 33. Network Management and 2 Pages Traffic Engineering .Quality of Service.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T E. Telephone Service. 504 : 1992Ψ 33. and production of reports for analysis __________________________________________________________________________________________ 305 . 503 : 1992Ψ 33. __________________________________________________________________________________________ GS ITU-T E.Measurement and Recording of Traffic . engineering and managing its network.Telephone Network and ISDN . 3 This standard provides means of estimating the traffic offered to circuit groups based on measurements of traffic carried and means of estimating origin-destination traffic flows based on circuit group measurements.Traffic 7 Pages Measurement Data Analysis Gr.Quality of Service. Service Operation and Human Factors . 1 This standard defines the essential features of a codec for the digital transmission of signals for video conference or visual telephone service __________________________________________________________________________________________ GS ITU-T H. Service Operation and Human Factors .Frame Structures for use in the International Interconnection of Digital 18 Pages Codecs for Videoconferencing or Visual Telephony Gr. primarily for the purpose of transmitting live or static pictures. 507 : 1993Ψ 33. identification of the model and estimation of parameters __________________________________________________________________________________________ GS ITU-T H.Measurement s of the Performance of Common Channel Signaling Network Gr. Service Operation and Human 28 Pages Factors . 2 The standard describes the use of multiplex structure use on digital paths and connections which interconnect video codecs for videoconferencing or visual telephony __________________________________________________________________________________________ 306 .160.Line Transmission of Non -Telephone Signals . 1 The hypothetical reference connections used as a guide to simplify the problems of connection between countries with different television standards and digitalhierarchies that rapid advances are being made in research and development of video coding and bit rate reduction techniques __________________________________________________________________________________________ GS ITU-T H.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . 110 : 1993Ψ 33. __________________________________________________________________________________________ GS ITU-T H. Telephone Service.Quality of Service.Telephone 6 Pages Signals .Telephone Network and ISDN .Codecs for Video Conferencing using Primary Digital Group Transmission 71 Pages Gr. 100 : 1993Ψ 33. 2 This standard indicate measurements which are considered appropriate for a full developedsignaling network using a mesh network configuration __________________________________________________________________________________________ GS ITU-T E.Line Transmission of Non . Network Management and 14 Pages Traffic Engineering .Line Transmission of Non . 130 : 1993Ψ 33.1 The standard describes in general a two-way telecommunication service which uses a switched network of broadband analogue and/or digital circuits to establish connections among subscriber terminals.Models for Forecasting International Traffic Gr.Quality of Service.040. Telephone Service. 505 : 1992Ψ Published by GSA in 2011 Series E: Overall Network Operation.Visual Telephone Systems Gr.Telephone Network and ISDN . 3 The standard gives guidelines for building various forecasting models.30 GS ITU-T E.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .040 Published by GSA in 2011 Series E: Overall Network Operation.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 33. 120 : 1994Ψ 33.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Telephone 9 Pages Signals . Network Management and Traffic Engineering .Hypothetical Reference Connections for Videoconferencing using Primary Digital group Transmission Gr.Line Transmission of Non -Telephone Signals .60 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . 235-2 : 2005Ψ 33.Infrastructure of Audiovisual Services – Systems Aspects 29 Pages H.160.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . and integrity within the protocol framework __________________________________________________________________________________________ GS ITU-T H. 3 22 Pages This Ghana Standard provide recommendations of security procedures for using direct routed and selective routed call signalling __________________________________________________________________________________________ GS ITU-T H. 235-4 : 2005Ψ 33.Infrastructure of Audiovisual Services – Systems Aspects H. 2 15 Pages This standard recommend.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Infrastructure of Audiovisual Services – Systems Aspects H. 1 9 Pages This Ghana standard defines a multipoint videoconference system which enables three or more videoconference sites to intercommunicate __________________________________________________________________________________________ GS ITU-T H. 235-1 : 2005Ψ 33. 140 : 1993Ψ 33.323 Security . 235-0 : 2005Ψ 33.323 Security: Direct and Selective Routed Call Security Gr. and tunneled messages using password-based hash protection and Call Signaling messages by using secure password-based cryptographic techniques.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . privacy.245-Based) Multimedia Systems Gr. __________________________________________________________________________________________ 307 . PKI-based hybrid security profile __________________________________________________________________________________________ GS ITU-T H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Infrastructure of Audiovisual Services – Systems Aspects . 235-3 : 2005Ψ 33.323 Security: Baseline Security Profile Gr. the recommendation as usable by any gatekeeper or endpoint using the H. or authentication-only for call signaling. 3 This standard describes an optional security profile for deploying digital signatures to secure signalling.60 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .323 And Other H.0 RAS protocols.Signature Security Profile 22 Pages Gr.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Infrastructure of Audiovisual Services – Systems Aspects H.Line Transmission of Non-Telephone Systems A Multipoint International Videoconference System Gr.Infrastructure of Audiovisual Services – Systems Aspects H. 235-5 : 2005Ψ 33. 3 This standard describe an efficient and scalable.225.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . 2 17 Pages The standard provides authentication and integrity protection. __________________________________________________________________________________________ GS ITU-T H.323 Security: Framework for Secure Authentication in Ras Using Weak Shared Secrets Gr.6 52 Pages The standard provides a security framework for authentication.Framework for Security in H Series (H.323 Security: Hybrid Security Profile Gr. __________________________________________________________________________________________ GS ITU-T H.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T H. __________________________________________________________________________________________ GS ITU-T H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . 323 : 2009Ψ 33. 235-6 : 2009Ψ 33. __________________________________________________________________________________________ 308 .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T H.323 Security: Key Exchange for Srtp Using Secure Signalling Channels Gr. __________________________________________________________________________________________ GS ITU-T H.Infrastructure of Audiovisual Services – 35 Pages Systems Aspects H.Infrastructure of Audiovisual Services – 114 Pages Systems and Terminal Equipment for Audiovisual Services .070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .245 key management. 235-8 : 2005Ψ 33.245 key management specified within the Recommendation. with one or more intervening Security Gateways with the prescribed behaviour. 12 This standard covers the technical requirements for very low bit-rate multimedia telephone terminals operating over the general switched telephone network (GSTN). 235-7 : 2005Ψ 33.Packet-Based Multimedia Communications Systems Gr. 4 This standard provide recommendations of security procedures for based systems to use the MIKEY key management protocol in conjunction with the SRTP security protocol..Terminal for Low Bit-Rate Multimedia Communication Gr. 3 21 Pages This standard provide recommendations for security procedures to support the IETF Secure Real Time Protocol (SRTP) between H. Enterprise Area Networks. These packet-based networks may include Local Area Networks.Infrastructure of Audiovisual Services – 326 Pages Systems and Terminal Equipment for Audiovisual Services .Infrastructure of Audiovisual Services – Systems Aspects H.Infrastructure of Audiovisual Services – Systems Aspects 46 Pages H.323 Security: Usage of the Mikey Key Management Protocol for the Secure Real Time Transport Protocol (Srtp) within H.235/H. 5 This standard specifies a security profile for voice encryption that uses the native H.225.323 Security: Security Gateway Support for H. __________________________________________________________________________________________ GS ITU-T H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . Metropolitan Area Networks.323 Security: Voice Encryption Profile with Native H. 324 : 2009Ψ 33.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . the recommendation as usable by any gatekeeper or endpoint using the H.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .323 Gr.0 RAS protocols.245 Key Management GR.323 Endpoints in cases where the cryptographic material for the media channel is transported over a secure signalling channel __________________________________________________________________________________________ GS ITU-T H. Intra-Networks and Inter Networks (including the Internet). 33 This standard covers the technical requirements for multimedia communications systems in those situations where the underlying transport is a Packet-Based Network (PBN) which may not provide a guaranteed Quality of Service (QoS).Infrastructure of Audiovisual Services – Systems Aspects H.235 Gr. 235-9 : 2005Ψ 33.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . Procedures for both voice encryption and for the related native H. __________________________________________________________________________________________ GS ITU-T H. 2 12 Pages This standard recommend.235/H. 323 Multimedia Endpoints.Supplementary Services for Multimedia 53 Pages Call Intrusion Supplementary Service for H. which is applicable to various basic services supported by H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . 450-4 : 1999Ψ 33. Call Forwarding No Reply (SS-CFNR) and Call Deflection (SS-CD).323 Multimedia Endpoints __________________________________________________________________________________________ 309 . which is applicable to various basic services supported by H.Supplementary Services for Multimedia 24 Pages Call Hold Supplementary Service for H. all of which are applicable to various basic services supported by H. which is applicable to various basic services supported by ITU T H.Supplementary Service for Multimedia 66 Pages Call Diversion Supplementary Service for H. 450-3 : 1998Ψ 33.Supplementary Services for Multimedia Generic Functional Protocol for the Support of Supplementary Services in H. __________________________________________________________________________________________ GS ITU-T H.Supplementary Services for Multimedia 47 Pages Call Transfer Supplementary Service For H.323 Gr. 3 It specifies the Call Offer supplementary service (SS-CO).070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . __________________________________________________________________________________________ GS ITU-T H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . __________________________________________________________________________________________ GS ITU-T H.323 Gr.323 endpoints.Supplementary Services for Multimedia 27 Pages Common Information Additional Network Feature for H. 450-12 : 2001Ψ 33. 450-10 : 2001Ψ 33. 450-2 : 1998Ψ 33. 6 It specifies the Call Intrusion supplementary service (SS-CI). which is applicable to various basic services supported by H. __________________________________________________________________________________________ GS ITU-T H.323 Gr.323 multimedia endpoints __________________________________________________________________________________________ GS ITU-T H. 3 The standard defines the signalling protocol between H.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T H.323 Gr. 450-11 : 2000Ψ 33. Call Forwarding Busy (SS-CFB). SS-CT is based on the equivalent supplementary service for Private Integrated Services Networks (PISN) __________________________________________________________________________________________ GS ITU-T H. which is applicable to various basic services supported by H.323 Gr. 3 The standard describes supplementary services the additional network feature common information (ANF-CMN).070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . 450-1 : 1998Ψ 33.323 entities for the control of supplementary services.7 This standard specifies the diversion supplementary services (SS-DIV).070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Supplementary Services for Multimedia 21 Pages Call Offering Supplementary Services for H.323 multimedia endpoints.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .323 multimedia endpoints. 5 This standard describes the Call Transfer supplementary service (SS-CT).323 Gr. 3 The standard specifies the Call Hold supplementary service (SS-HOLD). which comprise the services Call Forwarding Unconditional (SS-CFU).323 21 Pages Gr. 323 Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T H. 460-2 : 2001Ψ 33. 450-9 : 2000Ψ 33.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Supplementary Services for Multimedia ( Pages Number portability interworking between H.3 This standard describes the Message Waiting Indication supplementary service (SS-MWI).Mobility and Collaboration Procedures Security for Mobile Multimedia Systems and Services .Supplementary Services for Multimedia Call Park and Call Picup Supplementary Services for H.323 multimedia endpoints __________________________________________________________________________________________ GS ITU-T H.323 system elements __________________________________________________________________________________________ GS ITU-T H. which is applicable to H.323 and Scn Networks Gr. 530 : 2002Ψ 33. 6 This standard describes the Call Pack (SS-PARK) and the Call Pickup (SS-PICKUP)Supplementary Service That are applicable to various basic services supported by H. which is applicable to various basic services supported by H. 2 This standard specifies the Call Waiting Supplementary Service (SS-CW). H. 1 The standard specifies the Name Identification supplementary service.323 53 Pages Gr. 450-8 : 2000Ψ 33. 450-6 : 1999Ψ 33. __________________________________________________________________________________________ GS ITU-T H.Supplementary Services for Multimedia 24 Pages Message Waiting Indication Supplementary Service for H.510 Gr.Supplementary Services for Multimedia 11 Pages Call waiting Supplementary Services for H.510 __________________________________________________________________________________________ 310 .070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems -Supplementary Services for Multimedia 8 Pages Name Identification Supplementary Service for H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .323 mobility environments such as under the scope of ITU-T Rec. which is applicable to various basic services supported by H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Supplementary Services for Multimedia 58 Pages Call Completion Supplementary Services for H.323 Gr. 6 The standard describes supplementary services Call Completion (SS-CC). which are applicable to various basic services supported by H.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .323 Multimedia Endpoints. 3 The standard provide recommendations for security procedures in H. SS-MWI is based on the equivalent supplementary service for Private Integrated Services Network (PISN) __________________________________________________________________________________________ GS ITU-T H. __________________________________________________________________________________________ GS ITU-T H.323 and SCN networks __________________________________________________________________________________________ GS ITU-T H. 450-5 : 1999Ψ 33. 1 The standard specifies the number portability inert working procedures between H.323 Gr.070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .070 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .323 Gr.323 Multimedia Endpoints.Symmetric Security Procedures 25 Pages for H.323 Mobility in H. 450-7 : 1999Ψ 33.323 Endpoints. IPTV Application Event Handling . 3 30 Pages The standard provides content delivery error recovery mechanisms for IPTV services. 3 28 Pages This standard describes and specifies the functionalities of the IPTV terminal devices for the IPTV basic services __________________________________________________________________________________________ GS ITU-T H. 740 : 2010Ψ 33. 721 : 2009Ψ 33.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .IPTV Application Event Handling . It details the error recovery functions in the IPTV architecture and specifies detailed CDER mechanisms.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .IPTV Multimedia Services and Applications for IPTV IPTV Application Event Handling for IPTV Services .IPTV Terminal Devices: Basic Model Gr.Application Event Handling for IPTV Services . 720 : 2008 33. 740 : 2011 Amendment 1Ψ 33.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T H.Overview of Multimedia Application Frameworks for IPTV Services Gr. 721 : 2010 AMD.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia systems .Content Delivery Error Recovery for IPTV Services Gr. and also provides guidelines on the applicability of the CDER mechanisms to different IPTV services and network conditions __________________________________________________________________________________________ GS ITU-T H.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia systems . __________________________________________________________________________________________ GS ITU-T H.AMD 1: New Appendix 11 on Terminal Device Implementation Example Gr. 701 : 2009Ψ 33. __________________________________________________________________________________________ GS ITU-T H.IPTV Multimedia Services and Applications for IPTV IPTV Multimedia Application Frameworks .IPTV Multimedia Services and Applications for IPTV . It also describes the general architecture and functional components of an IPTV terminal device. providing high-level description of functionality of terminal devices for IPTV services __________________________________________________________________________________________ GS ITU-T H. 2 18 Pages The standard identifies and describes the relevant of multimedia application networks for interoperability and harmonization __________________________________________________________________________________________ 311 . 2 14 Pages The standard provides a framework for application event handling for IPTV It also describes general aspects for IPTV application event services such as emergency alert and audience measurement.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .Application Event Handling for IPTV Services Gr.New Video Handling Sensor Event Scenario in Appendix 11. __________________________________________________________________________________________ GS ITU-T H.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia systems .General Aspects .IPTV Multimedia Services and Applications for IPTV .IPTV Terminal Devices: Basic Model Gr.Amendment 1 Gr 2 19 Pages The standard provides a framework for application event handling for IPTV It also describes general aspects for IPTV application event services such as emergency alert and audience measurement. 1Ψ 33. 760 : 2009Ψ 33. 3 The standard give an overview of internet protocol television terminal devices and end systems.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .IPTV Multimedia Services and Applications for IPTV IPTV Application Event Handling for IPTV Services .IPTV Terminal Devices: Basic Model .IPTV Multimedia Services and 25 Pages Applications for IPTV .IPTV Multimedia Services and Applications for IPTV . 3 29 Pages The standard describes and specifies the functionalities of the IPTV terminal devices for the IPTV basic services. 5 : 2011Ψ 33.Guidelines for Resource Management of 'IP Address and Port' Resources for H. It also provide a quick reference to those parameters __________________________________________________________________________________________ GS ITU-T H.Application Profile .SUP.Repository of Generic Parameters for 5 Pages ITU. 460. 6 : 1993Ψ Published by GSA in 2011 Series K: Protection Against Interference . 1 : 1999Ψ 33.Sign language and Lip-Reading Real-Time Conversation using Low Bit-Rate Video Communication 11 Pages Gr. 1 This standard cautions Crossings between overhead telecommunication lines and electricity lines which present dangers for persons and for equipment __________________________________________________________________________________________ 312 . 2 11 Pages The standard describespotential failure scenarios in detail and provides possible solution proposals for each scenarios __________________________________________________________________________________________ GS ITU-T K. 1 This standard recommendations lists generic parameters assigned in the ITU. 4 31 Pages This standard summarizes packages that have been standardized in the time frame. 248. 1 This standard allows administrations that wish to adopt joint use of the same supports for open-wire or aerial cable telecommunication lines and for electricity lines __________________________________________________________________________________________ GS ITU-T K.2 This standard application profile document gives the background to the requirements and offers as well as guidance on how these requirements can be met.Operator Requirements for Full-Service VDSL in ITU-T Recommendations H.SUP.248 RTP Terminations Gr.SUP.Joint use of Poles for Electricity Distribution 2 Pages and for Telecommunications Gr.Release 14 Gr.99 Published by GSA in 2011 Series K: Protection Against Interference .X Sub-Series Packages Guide .SUP. 460. 5 : 1993Ψ 33.X Sub-Series Recommendations Gr.T H.T H.Gateway Control Protocol .SUP.x sub-series requirements for package definition and are for general use by the wider standards community __________________________________________________________________________________________ GS ITU-T H.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .ITU-T H.4 The standard define the architecture and operations.Precautions at Crossings 33. 3 : 2003Ψ 33.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems .100. known as Full Service VDSL network __________________________________________________________________________________________ GS ITU-T H. The purpose also of this standard is to indicate how current and future video coding schemes can be applied to sign language and lip-reading __________________________________________________________________________________________ GS ITU-T H.248. administration monitoring and provisioning requirements for the delivery of video.100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T H.X series.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . It also identifies packages that meet ITU-T H.611 33 Pages Gr.99 3 Pages Gr. data and voice services across a VDSL access network to an in-home environment. 2 : 2010Ψ 33.610 and H. 4 : 2010Ψ 33.160 Published by GSA in 2011 Series H: Audiovisual and Multimedia Systems . 01 Published by GSA in 2011 Series K: Protection Against Interference . generated by the electrical power and traction systems.100.100. 19 : 1993Ψ 33. c) the type of the telecommunication cable. 1 This standard recommend practical guidelines in determining safe distances between buried telecommunication cables and earthing systems of power facilities in the absence of local measurements or calculated values of EPR.100.1 This standard recommend that Power cables should generally be buried deeper than telecommunication cables. __________________________________________________________________________________________ GS ITU-T K.100. __________________________________________________________________________________________ 313 . 21 : 2008Ψ 33.99 Published by GSA in 2011 Series K: Protection Against Interference . 8 : 1993Ψ 33.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T K. 60 Hz) and its harmonics. __________________________________________________________________________________________ GS ITU-T K. 10 : 1997Ψ 33.10 Published by GSA in 2011 Series K: Protection Against Interference .Induced Voltages in Cables with Plastic 3 Pages Insulated Conductors Gr. __________________________________________________________________________________________ GS ITU-T K. 7 : 1993Ψ 363. 1 The standard recommended that the proposed provisions should limit the aural discomfort which might be caused by abnormal electrical signals applied to subscriber systems as a result of erroneous operation or unwanted actuation of the equipment to which subscriber systems are connected.01 Published by GSA in 2011 Series K: Protection Against Interference . 1 The standard recommend the permissible induced longitudinal voltage in the cable conductors should not exceed 60% of the voltage used to check the dielectric strength of the cable. d) the nature of the separating material. 13 : 1993Ψ 33. __________________________________________________________________________________________ GS ITU-T K. Power and telecommunication cables should be separated by a suitable distance according to: a) the voltage of the power cable. 3 The standard specifies resistibility requirements and test procedures for telecommunication equipment which is attached to or installed within a customer premises building.Low Frequency Interference due to 12 Pages Unbalance about Earth of Telecommunication Equipment Gr.Joint use of Trenches and Tunnels for Telecommunication and Power Cables 2 Pages Gr. up to higher frequencies (up until a few tens of kHz) generated by any other industrial or domestic electrical equipment __________________________________________________________________________________________ GS ITU-T K.100.10 Published by GSA in 2011 Series K: Protection Against Interference . b) the type of the power cable.01 Published by GSA in 2011 Series K: Protection Against Interference . 2 The standard recommendation covers the domain of the low frequency band extending from the fundamental frequency (16 2/3 Hz. 50 Hz.Protection Against Acoustic Shock 1 Page Gr.Separation in the Soil Between Telecommunication Cables and Earthing System of Power Facilities 5 Pages Gr.100.Resistibility of Telecommunication Equipment Installed in Customer Premises to Overvoltages and Overcurrents 22 Pages Gr. __________________________________________________________________________________________ 314 .Selection of Protective Devices 33.01 Published by GSA in 2011 Series K: Protection Against Interference .100. It deals with the protection of telecommunication equipment.2 This standard recommendation applies to semi-conductor arrester assemblies to be used for primary protection against voltage surges due to lightning or power disturbances on telecommunications circuits.Characteristics of Semi-Conductor 13 Pages Arrester Assemblies for the Protection of Telecommunications Installations Gr.Bonding Configurations and Earthing at Remote Electronic 9 Pages Sites Gr. subscriber’s installations and cable plants exposed to overvoltages and overcurrents due to lightning discharges or power faults. enables signalling with earth return and minimizes service interruptions and equipment damage.100. and a floor space of about 100 m2 without an antenna tower on the roof of the building as well as nearby.c.01 Published by GSA in 2011 Series K: Protection Against Interference .CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T K. 2 17 Pages The standard defines classification of the electromagnetic environmental conditions encountered where telecommunication equipment is installed. 36 : 1996Ψ Published by GSA in 2011 Series K: Protection Against Interference .99 Published by GSA in 2011 Series K: Protection Against Interference . 3 This standard mentions the experience in the operation of telecommunication centres shows that the use of a bonding and earthing network that is coordinated with equipment capability and with electrical protection devices. 2 14 Pages The standard explains both low and high frequency EMC mitigation techniques in order to avoid disturbances and interference caused by low and high frequency interference and fast transient phenomena. outdoor locations and customer premises. but are more substantial than small electronic housings. 27 : 1996Ψ 33.Classification of Electromagnetic Environmental Conditions for Telecommunication Equipment – Basic Emc Recommendation Gr. 28 : 1994Ψ 33. __________________________________________________________________________________________ GS ITU-T K.100. It also deals with semi-conductor arrester assemblies of the type that limit voltages from line to earth to a few volts when conducting sufficient current to switch the device.01 11 Pages Gr. such as carrier repeaters or distribution terminals __________________________________________________________________________________________ GS ITU-T K.Low and High Frequency Emc Mitigation Techniques for Telecommunication Installations and Systems – Basic Emc Recommendation Gr. 35 : 1996Ψ 33. 37 : 1999Ψ 33. 34 : 2003Ψ 33. 2 The standard gives guidance on the selection of protective components and assemblies in a telecommunication network. It also applies to installation and maintenance of the telecommunications network. It also applies to telecommunication equipment installed in telecommunication centres.99 Published by GSA in 2011 Series K: Protection Against Interference . promotes personnel safety and reduces fire hazards. __________________________________________________________________________________________ GS ITU-T K. a need for a. cabinets or controlled environmental vaults with only one level.01 Published by GSA in 2011 Series K: Protection Against Interference .100. 1 The standard covers bonding configurations and earthing for equipment located at remote electronic sites such as switching or transmission huts. mains power service. __________________________________________________________________________________________ GS ITU-T K. Interferences from discharges of static electricity (ESD) and Electrical Fast Transients (EFT) are also considered as far as it may cause permanent damages to equipment.100.100. __________________________________________________________________________________________ GS ITU-T K.Bonding Configurations and Earthing inside a Telecommunication Building 25 Pages Gr. __________________________________________________________________________________________ GS ITU-T K. such as telecommunication centres.100.Resistibility of Telecommunication Equipment Installed in the Access and Trunk Networks to Overvoltages and Overcurrents 32 Pages Gr. large installations at subscriber’s premises. 40 : 1996Ψ 33.Radiated Emission Test Procedure for Physically Large Systems 11 Pages Gr.Protection of Telecommunication Lines using Metallic Conductors against Direct Lightning Discharges 21 Pages Gr.100. 38 : 1996Ψ Published by GSA in 2011 Series K: Protection Against Interference . __________________________________________________________________________________________ GS ITU-T K. 3 The standard gives a procedure in order to protect telecommunication lines using metallic symmetric conductors against overvoltages and overcurrent imposed on the lines due to nearby lightning discharges __________________________________________________________________________________________ GS ITU-T K. 2 16 Pages The standard addresses new and existing structures. with the exception of radio equipment .100. 11 The standard describes resistibility tests for all telecommunication equipment against overvoltages and overcurrents for use by network operators and manufacturers __________________________________________________________________________________________ GS ITU-T K. 47 : 2008Ψ 33. 4 This standard specifies resistibility requirements and test procedures for telecommunication equipment installed between telecommunication centres and between a telecommunication centre and customer's premises building. 3 The standard is to protect the telecommunication lines using metallic conductors against direct lightning discharges to the line itself or to the structures that the line enters __________________________________________________________________________________________ 315 .99 Published by GSA in 2011 Series K: Protection Against Interference .Risk Assessment of Damages to 15 Pages Telecommunication Sites due to Lightning Discharges Gr.10 Published by GSA in 2011 Series K: Protection Against Interference .Induced Surges Gr.20 Published by GSA in 2011 Series K: Protection Against Interference .99 Published by GSA in 2011 Series K: Protection Against Interference .99 Published by GSA in 2011 Series K: Protection Against Interference . It also applies to physically large systems which are comprised of equipment or systems requiring installation documentation specific for those sites at which they are to be installed __________________________________________________________________________________________ GS ITU-T K. 45 : 2008Ψ 33.10 GS ITU-T K. remote sites and gives advice for the design and the installation of protective measures against LEMP in order to reduce damages to the equipment and cabling inside these structures.100.Protection Against Lemp in Telecommunications Centres Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 33.Protection of Telecommunication Lines using 26 Pages Metallic Symmetric Conductors Against Lightning .100. 2 This standard comprises a method for the risk assessment of damages to equipment at telecommunication sites and personnel safety due to overvoltages and overcurrents caused by lightning discharges.99 Published by GSA in 2011 Series K: Protection Against Interference . __________________________________________________________________________________________ GS ITU-T K. 44 : 2008Ψ 33. 39 : 1996Ψ 33.Resistibility Tests for Telecommunication Equipment Exposed to Overvoltages and Overcurrents – Basic Recommendation 110 Pages Gr. 2 The standard specifies the technical requirements for the radiated emission measurement procedure for physically large systems used within the public telecommunication network.100. 46 : 2008Ψ 33.100. 99 Published by GSA in 2011 Series K: Protection Against Interference . 54 : 2004Ψ 33. 2 The standard specifies the Overvoltage requirements and test procedures for insulation displacement connectors(IDCs) used for symmetric pair conductors subjected to overvoltages and overcurrents __________________________________________________________________________________________ 316 . digital mobile base station.Guidance on Complying with Limits for 38 Pages Human Exposure to Electromagnetic Fields Gr. 51 : 2009Ψ 33.100. mechanical hazards or injury for the operator and layman who may come into contact with the equipment and where specifically stated for service personnel __________________________________________________________________________________________ GS ITU-T K.20 Published by GSA in 2011 Series K: Protection Against Interference .10.20 Published by GSA in 2011 Series K: Protection Against Interference . digital radio relay system. transmission.100.Safety Criteria for Telecommunication Equipment Gr. 33. 55 : 2002Ψ 33. 4 The standard to aims to help with compliance of telecommunication installations with safety limits for human exposure to electromagnetic field produced by telecommunication equipment in the frequency range 9KHz to 300 GHz.100. 1 6 Pages This standard specifies requirements intended to reduce risks of fire . power.100.Product Family Recommendation 54 Pages Gr. power or electrified railway lines on telecommunication lines __________________________________________________________________________________________ GS ITU-T K. electric shock.100. 2 The standard provides guidance on voltages and currents that may safely be used to power telecommunication systems that are part of the network __________________________________________________________________________________________ GS ITU-T K.100.EMC Requirements for Telecommunication Equipment .99 Published by GSA in 2011 Series K: Protection Against Interference .99 Published by GSA in 2011 Series K: Protection Against Interference .Test Requirements and Performance Criteria for Voice Terminal Telephones Subject to Disturbance from Digital Mobile Telecommunications Systems Gr. digital subscriber line and supervisory equipment __________________________________________________________________________________________ GS ITU-T K. It also provides techniques and procedures for assessing the severity of field exposure and for limiting the exposure to workers and the general public to these fields it the limits are exceeded __________________________________________________________________________________________ GS ITU-T K.01 Published by GSA in 2011 Series K: Protection Against Interference .c. 6 It specifies the emission and immunity requirements for switching.100. 49 : 2009Ψ 33.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T K.100. 2 11 Pages the standard define the test level and test methods to establish the grade of immunity of voice terminal telephones to radio disturbance generated by equipment used in digital mobile telecommunications systems __________________________________________________________________________________________ GS ITU-T K. 50 : 2000Ψ 33. 48 : 2006Ψ 33.Conducted Immunity Test Method and Level at Fundamental Power Frequencies 4 Pages Gr. wireless LAN.Overvoltage and Overcurrent Requirements 14 Pages for Installation Displacement Connectors (IDC) Terminations Gr. 1 The standard refers to long-term voltages induced by a.Safe Limits of Operating Voltages and Currents for Telecommunication Systems Powered Over the Network 11 Pages Gr.20 Published by GSA in 2011 Series K: Protection Against Interference . 52 : 2004Ψ 33. 10 Published by GSA in 2011 Series K: Protection Against Interference .01 GS ITU-T K. It is also to provide a set of procedures to protect the RBS against lightning discharges. Resistibility and Safety Requirements 19 Pages and Guidance . when power line towers are used for locating radio based stations __________________________________________________________________________________________ GS ITU-T K. Published by GSA in 2011 Series K: Protection Against Interference . 1 The standard is to guide administrations when considering complaints of interference between telecommunication systems __________________________________________________________________________________________ GS ITU-T K.100.Protection of Radio Based Stations against Lightning Discharges 31 Pages Gr.Amendment 1: Clarification to Scope Gr.01 Published by GSA in 2011 Series K: Protection Against Interference . 2 This standard provide guidance aimed at ensuring safe and problem free operation in a co-located telecommunication installation form the viewpoint of electromagnetic compatibility (EMC) resistibility and safety __________________________________________________________________________________________ GS ITU-T K.Emission Levels and Test Methods for Wireline Telecommunication Networks to Minimize Electromagnetic Disturbance of 1 Page Radio Services . 60 : 2008Ψ 33.01 Published by GSA in 2011 Series K: Protection Against Interference . 3 21 Pages The standard deals with measurements used for radio-frequency electromagnetic field strength evaluation to verify that human exposure limits are not exceeded by electromagnetic fields produced by telecommunication installations in the frequency range 9 KHz to 300 GHz.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 33. 59 : 2003Ψ 33.100.100. 4 The standard addresses radio base stations (RBSs) made of a shelter or small building to house the equipment and a nearby tower to hold the antennas.100. Resistibility and Safety Requirements and Procedures for Connection to Unbundled Cables 8 Pages Gr. 1 The standard ensure the safety and problem-free operation for connection to unbundled cables __________________________________________________________________________________________ GS ITU-T K. 61 : 2008Ψ 33.99 Published by GSA in 2011 Series K: Protection Against Interference .EMC.Protection Measures for Radio Base 62 Pages Stations Sited on Power Line Towers Gr.100. 58 : 2008Ψ 33. It also specifies target levels for radiated disturbance in the frequency range 9 kHz to 6 GHz __________________________________________________________________________________________ GS ITU-T K. 56 : 2010Ψ Published by GSA in 2011 Series K: Protection Against Interference . 60 : 2009 Amendment 1Ψ 33.Co-located Telecommunication Installations Gr.Emission Levels and Test Methods for Wire line Telecommunication Networks to Minimize Electromagnetic Disturbance of Radio Services Gr. It also gives guidance to computational methods that can be used to achieve a compliance assessment __________________________________________________________________________________________ 317 . 7 This standard specifies measures to be taken with respect to safety and risk of damage to equipmentthrough earth potential rise.Guidance on Measurement and Numerical Prediction of Electromagnetic Fields for Compliance with Human Exposure Limits for Telecommunication Installations Gr.10 Published by GSA in 2011 Series K: Protection Against Interference .100. 2 14 Pages this standard covers the frequency range 9 kHz to 400GHz. __________________________________________________________________________________________ GS ITU-T K.EMC.100. 57 : 2003Ψ 33. c.99 Published by GSA in 2011 Series K: Protection Against Interference .100. electrified traction systems __________________________________________________________________________________________ 318 .Expected Surges on Telecommunications and 34 Pages Signaling Networks due to Lightnting Gr 4 This standard define the expected surges( overvoltages and Overcurrents) due to lightning at different transition points of the telecommunication access network and signalling lines.a. electrified traction systems. 2 The standard provides a procedure for demonstrating the compliance of the radiated RF emissions from telecommunication systems __________________________________________________________________________________________ GS ITU-T K.Operator Responsibilities in the Management of Electromagnetic Interference by Power Systems on Telecommunication Systems Gr. 64 : 2011Ψ 33.Protection of Customer Premises form Overvoltages Gr. __________________________________________________________________________________________ GS ITU-T K.Safe Working Practices for Outside 21 Pages Equipment Installed in Particular Environments Gr. d..e. interference produced on telecommunication systems by the following power systems: a.c.c.Overvoltage and Overcurrent Requirements for Termination Modules with Contacts for Test Ports or Surge Protective Devices 38 Page Gr. 63 : 2004Ψ 33. 65 : 2011Ψ 33. both outside and inside structures i.System Level Radiated Emissions Compliance Using Mathematical Modeling 19 Pages Gr.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 33. electric power systems. 67 : 2006Ψ 33. electric power systems.01 Published by GSA in 2011 Series K: Protection Against Interference . 6 54 Pages The standard provides recommendations for bonding and earthing of telecommunication equipment for installing protection at residential and commercial customers premises __________________________________________________________________________________________ GS ITU-T K. a. 7 65 Pages The standard gives criteria defining situations to be examined and the installation conditions of both power and telecommunication plants under which the management voltages areapplicable to the e. 68 : 2008Ψ 33.100. 3 The standard provide working procedures for maintenance activities in specific environments for telecommunicationplants with voltage levels higher than the limits defined for analogue PSTN circuit.Maintaining the Suitability of Production Telecommunications Equipment to its Intended Electromagnetic Environment 6 Pages Gr.m.100.01 Published by GSA in 2011 Series K: Protection Against Interference .100. 4 this standard specifies the requirements and test procedures for termination module with contacts for test ports or SPDs used for symmetric pair conductors subjected to overvoltages and overcurrents __________________________________________________________________________________________ GS ITU-T K.99 Published by GSA in 2011 Series K: Protection Against Interference .01 GS ITU-T K.99 Published by GSA in 2011 Series K: Protection Against Interference . 66 : 2011Ψ 33.01 Published by GSA in 2011 Series K: Protection Against Interference . d. 62 : 2004Ψ Published by GSA in 2011 Series K: Protection Against Interference . 1 The standard suggested some electromagnetic compatibility test that may be used by both telecommunications operators and equipment manufacturers to determine the suitability of a batch of telecommunications equipment to its intended electromagnetic environment __________________________________________________________________________________________ GS ITU-T K. exchanges customers buildings and remote sites __________________________________________________________________________________________ GS ITU-T K.100.100.100. network operators and test houses on the classification of the type of interface. __________________________________________________________________________________________ GS ITU-T K. 72 : 2008Ψ 33.Protection of Telecommunication Lines using Metallic Conductors Against Lightning – Risk Management 11Pages Gr. against lightning discharges and mains contact including contact with aerial power service leads. including satellite antennas.Claasification of Interface for Application of 15 Pages Standards on Resistibility and Safety of Telecommunication Equipment Gr.Maintenance of Protective Measures 18 Pages Gr. It also provides requirements to achieve protection of telecommunications and video content antenna systems. 2 13 Pages This standard analyses the situation in which equipment.Mitigation Techniques to Limit Human 51 Pages Exposure to EMFS in the Vicinity of Radiocommunication Stations Gr. 2 This standard deals with the risk management of lightning protection of telecommunication networks using cables with metallic conductors.99 Published by GSA in 2011 Series K: Protection Against Interference .01 Published by GSA in 2011 Series K: Protection Against Interference . 2 This serves as guidance to manufacturers.100. 75 : 2008Ψ 33.99 Published by GSA in 2011 Series K: Protection Against Interference .. that is external or internal __________________________________________________________________________________________ 319 .EMC.100.100.100. 5 The standard provides requirements to minimize the risk of injury to users of the service and damage to equipment. 6 The standard provides guidance on mitigation techniques for limiting the exposure from radio communication installations especially in the multiple sources environment __________________________________________________________________________________________ GS ITU-T K. 2 The standard gives guidance on the maintenance of protective measures in telecommunication installations.100. connected together is installed in different buildings with different earthing and power feeding conditions.Shielding and Bonding for Cables between Buildings Gr. Resistibility and Safety Requirements 16 Pages for Home Network Devices Gr. 70 : 2007Ψ 33. It deals with the maintenance of the protection of telecommunication equipment. 73 : 2008Ψ 33. installations and cable plants exposed to the results external sources of interference such as overvlotages and overcurrents due to lighting discharges or power induction __________________________________________________________________________________________ GS ITU-T K. having the same earthing and feeding power condition to improve the shielding and bonding of telecommunication and power cable between buildings __________________________________________________________________________________________ GS ITU-T K.99 Published by GSA in 2011 Series K: Protection Against Interference . 74 : 2008Ψ 33. __________________________________________________________________________________________ GS ITU-T K.99 Published by GSA in 2011 Series K: Protection Against Interference .10 Published by GSA in 2011 Series K: Protection Against Interference . 2 This standard provides EMC requirements for home network devicesthat mainly have the function of telecommunication __________________________________________________________________________________________ GS ITU-T K. 71 : 2007Ψ 33.99 Published by GSA in 2011 Series K: Protection Against Interference .100.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T K. It also includes installation requirements for equipment located in different buildings.100.Protection of Customer Antenna Installations 41 Pages Gr. 69 : 2006Ψ 33. 100.99 Published by GSA in 2011 Series K: Protection Against Interference . scientific and medical (ISM) band used by new radioservice systems __________________________________________________________________________________________ GS ITU-T K.20 Published by GSA in 2011 Series K: Protection Against Interference .terminal series connected. solid-state.4 GHZ ISM Band Gr.01 Published by GSA in 2011 Series K: Protection Against Interference .20 Published by GSA in 2011 Series K: Protection Against Interference .Electromagnetic Characterization of the 51 Pages Radiated Environment in the 2.100.100. 6 The standard analyses the electromagnetic environment characteristics of the 2. 3 The standard gives guidance on the protection of telecommunication centre equipment. transmission.10 : 33. 1Ψ 33. and power. 81 : 2009Ψ 33.11) for the protection of power supply circuits and signal circuits of telecommunication installation against overvoltages __________________________________________________________________________________________ GS ITU-T K.20 Published by GSA in 2011 Series K: Protection Against Interference .100.150 KHZ) Gr.Power Electromagnetic Immunity 49 Pages Guide for Telecommunication Systems Gr. from damage and disruption due to a high altitude electromagnetic pulse __________________________________________________________________________________________ GS ITU-T K. 82 : 2010Ψ 33. 3 This standard applies to 2 .EMC Requirements for Telecommunication Network Equipment (9 KHZ .99 Published by GSA in 2011 Series K: Protection Against Interference . the physical security measure that may be employed to reduce the threat level and establishing the vulnerability of the equipment to be protected from an HPEM attack __________________________________________________________________________________________ GS ITU-T K. self-restoring overcurrent protectors (OCPs) used in surge protective devices (SPDs) and telecommunications equipment. radio. such as switching.High .High Altitude Electromagnetic Pulse Immunity Guide for Telecommunication Centres 24 Pages Gr.Characteristics of Metal Oxide Varistors for the Protection of Telecommunication Installations . 2 11 Pages The standard define test set-up.Restoring Overcurrent Protectors for the Protection of Telecommunications 22 Pages Installations Gr.Characteristics of Metal Oxide Varistors 45 Pages for the Protection of Telecommunication Installations Gr.100. 5 The standard gives the characteristics of metal oxide varistors used in accordance with (b-ITU-T K.100. 76 : 2008Ψ 33. 77 : 2011 Cor. 78 : 2009Ψ 33.99 Published by GSA in 2011 Series K: Protection Against Interference . 1 This corrigendum resolves six references which have been revised and their references need to be updated __________________________________________________________________________________________ GS ITU-T K. 77 : 2009Ψ 33.100. measurement methods.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS ITU-T K. Self .Corrigendum 1 2 Pages Gr.Characteristics and Ratings of Solid -State. It also provides the basic requirements and parameter tests for OCPs used in the protection of telecom installations __________________________________________________________________________________________ 320 . 79 : 2009Ψ 33. 5 The standard gives guidance on establishing the threat level presented by an intentional high-power electromagnetic attack on anelectronic equipment or system. emission limits and immunity test levels for telecommunication network equipment __________________________________________________________________________________________ GS ITU-T K.4 GHz industrial.100. Calculation of Loudness Ratings for 33 Pages Telephone Sets Gr. 2 This standard describes an easy to implement method ot objectively determine the active speech level.140 Published by GSA in 2011 Series P: Terminals and Subjective and Objective Assessment Methods .140 Published by GSA in 2011 Series P: Telephone Transmission Quality .Objective Measurement of Active Speech Level Gr.Objective 16 Pages Measuring Apparatus . __________________________________________________________________________________________ GS ITU-T P. 58 : 1996Ψ 33. 79 : 2007Ψ 33.Objective Measuring Apparatus . 2 This standard determines the loudness ratings.Measurements Related to Speech Loudness 14 Pages Determination of Loudness Ratings: Fundamental Principles Gr.140 Published by GSA in 2011 Series P: Terminals and Subjective and Objective Assessment Methods . loudness rating.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 33. 1000 : 2011Ψ Published by GSA in 2011 Series L: Construction Installation and Protection of Cables and other Elements of outside Plant .Head and 32 Pages Torso Simulator for Telephonometry Gr. 4 The standard deals with sending and receiving frequency response.Transmission Characteristics for Narrow-Band digital Handset and Headset Telephones Gr.140 Published by GSA in 2011 Series P: Telephone Transmission Quality. and also deals with the fundamental principles __________________________________________________________________________________________ GS ITU-T P. 4 The standard describes the preferred method for calculating loudness ratings mainly in the case of local telephone systems which transmit a band of frequencies not exceeding about 180-4500 Hz __________________________________________________________________________________________ GS ITU-T P. Noise.99 GS ITU-T L.Voice Terminal 31 Pages Characteristics . Telephone Installations. 76 : 1993Ψ 33.140 Published by GSA in 2011 Series P: Telephone Transmission Quality . out-of-band signals. distortion. 310 : 2009Ψ 33.Both sound emissions and sound pick-up characteristics are specifies. __________________________________________________________________________________________ GS ITU-T P.050. Local line Networks Measurements related to Speech Loudness . 3 The standard provides high level requirement for a universal power adapter and charger solution that will reduce the number of nd chargers produced and recycled by widening their application to more devices and increasing their lifetime __________________________________________________________________________________________ GS ITU-T P. side tone.Universal Power Adapter and Charger Solution for Mobile Terminals and 28 Pages other Hand-Held ICT Devices Gr. It also acts as a reference against which other methods can be compared. 56 : 2011Ψ 33. 4 The standard specifies the head and torso simulator for telephonomeric use. echo and delay of narrow-band digital handset and headset telephones using "waveform" encoding __________________________________________________________________________________________ 321 . linearity. 805 : 2007Ψ 33. Telephone Installations. 311 : 2011Ψ Published by GSA in 2011 Series P: Terminals and Subjective and Objective Assessment Methods . Local line Networks Subscribers' Lines and Sets . Telephone Installations. whatever the applications __________________________________________________________________________________________ GS ITU-T P. It also includes specifications for handset and headset and speakerphone set of mobile terminals.140 Published by GSA in 2007 Series P: Telephone Transmission Quality. Local Line Networks 139 Pages Methods for Objective and Subjective Assessment of Quality . intended for the replacement of flasks actually in use. __________________________________________________________________________________________ GS OIML R 44 : 1985Ψ Published by GSA in 2005 Alcoholmeters and Alcohol Hydrometers for use in Alcoholmetry 17. 313 : 2007Ψ 33.30 14 Pages Gr 2 This applies to new standard graduated flasks.Subjective Evaluation of Conversational Quality Gr.Transmission Characteristics for Cordless and Mobile Digital Terminals Gr. performance and testing principles of speech processing devices for acoustic enhancementintended for use in terminals. 2 The standard applies to the generic transmission characteristics. or when new flasks are to be acquired as supplementary standards. Local line Networks 40 Pages Subscribers' Lines and Sets . and to thermometers for use in alcoholometry __________________________________________________________________________________________ 322 . Telephone Installations.Speech Processing Devices for Acoustic Enhancement 14 Pages Gr.140 Published by GSA in 2011 Series P: Telephone Transmission Quality. 14 The standard describes methods and procedures for conducting conversation test to evaluate communication quality.020 7 Pages Gr 1 The recommendation applies to alcoholmeters and alcohol hydrometers used for the determination of the alcoholic strength of mixtures of water and ethanol.Transmission Characteristics for Wide-Band digital Handset and 21 Pages Headset Telephones Gr.Voice Terminal Characteristics . 4 The standard deals with electro-acoustic performance parameters of portable digital cordless and mobile terminals. The methodology uses example of scenarios. 3 This standard provides audio performance requirements and test methods fro digital handset and headset telephones capable of transmitting an audio bandwidth extending beyond the conventional telephony bandwidthof 300Hz to 3400 Hz to a bandwidth of approximately 100 Hz to 8000 Hz __________________________________________________________________________________________ GS ITU-T P.140 GS ITU-T P. 330 : 2003Ψ 33. __________________________________________________________________________________________ GS ITU-T P.140 Published by GSA in 2011 Series P: Telephone Transmission Quality.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ 33. rating scales and analysis procedures to estimate the subjective quality of telecommunication services __________________________________________________________________________________________ GS OIML R 43 : 1981Ψ Published by GSA in 2005 Standard Graduated Glass Flask for Verification Officers 81.040. 1 Publicly Available Specification (PAS) for Petroleum Products 75. and when subjected to national metrological control.CATALOGUE OF GHANA STANDARDS ©GSA 2012 __________________________________________________________________________________________ GS OIML R 52 : 2004Ψ Published by GSA in 2005 Hexagonal Weights . Premix Gasoline. Gr 4 This recommendation specifies the characteristics of standard capacity measures and describes the methods by which measuring systems for liquids other than water (hereinafter called "measuring systems") are used in order to verify that they comply with the relevant metrological requirements in the International Recommendation OIML R 117 Measuring systems for liquids other than water __________________________________________________________________________________________ GS PAS 1 : 2005 Ed.Tests 83 Pages Gr 9 This recommendation specifies the metrological and technical requirements for non-automatic weighing instruments that are subject to official metrological control.Metrological and Technical Requirements 17. When used for that measurement.100 7 Pages Gr 1 This recommendation applies to hexagonal weights made of grey cast iron. __________________________________________________________________________________________ GS OIML R 76-1 : 1992Ψ 17. Inland Fuel oil.Unleaded Gasoline. Kerosene.080 10 Pages Gr 1 This publicly available specification lists the requirements for specific petroleum products.General Requirements 23.Publicly Available Specification (PAS) for Portland Limestone Cement .CEM II/BL (LL) 15 Pages Gr 2 __________________________________________________________________________________________ 323 . __________________________________________________________________________________________ GS OIML R 71 : 1985Ψ Published by GSA in 2007 Fixed Storage Tanks.020. Gas oil. 1 Building and Construction Materials . Residual Fuel oil.100 Published by GSA in 2005 Nonautomatic Weighing Instruments Part 1: Metrological and Test Requirements .10 25 Pages Gr 3 It fixed storage tanks at atmospheric pressure or under pressure (hereinafter called -tanks are built for bulk liquid storage and may be used for measurement of volumes (quantities) of liquid contained. It covers the following: Liquefied Petroleum Gas (LPG).100. they shall comply with the general requirements of this Recommendation.10 Ed.020 Published by GSA in 2005 Standards Capacity Measures for Testing Measuring Systems for Liquids other than 35 Pages Water. and Cracked Fuel oil. Industrial diesel oil. __________________________________________________________________________________________ GS OIML R 120 : 1996Ψ 17. __________________________________________________________________________________________ GS PAS 2 : 2007 91. gsa.gh ©Ghana Standards Authority 2012 .gov.CATALOGUE OF GHANA STANDARDS 2012 www. Watch Batteries Acid Cells and Batteries .Code of Practice for Crop Production Standard Number GS IEC 60095-4 : GS IEC 62259 : 2003Ψ GS 43 : 1972 Page 89 111 2 89 89 13 88 88 88 88 88 111 110 110 110 108 106 123 187 283 263 227 249 187 263 21 59 59 60 169 247 247 237 231 164 164 174 186 186 GS IEC 60095-1 : GS IEC 60095-4 : 1996 GS 214 : 1995 GS IEC 60086-2 : GS IEC 60086-2 : 2001 GS IEC 60086-1 : GS IEC 60086-4 : GS IEC 60086-3 : GS IEC 62133 : 2002 Ψ GS IEC 61960 : 2003Ψ GS IEC 61959 : 2004Ψ GS IEC 61951-1 : GS IEC 61427 : 2005Ψ GS IEC 61056-1 : GS ISO GS ISO 532 : 1975Ψ 4578 : 1997Ψ GS ISO 15605 : 2000Ψ GS ISO 11003-1 : GS ISO GS ISO GS ISO 7387-1 : 1983Ψ 9142 : 2003Ψ 4587 : 2003Ψ GS ISO 11003-2 : GS 314 : 2010 GS 949-1 : 2011 Agricultural Implements .Code of Practice GS 949-2 : 2011 Agricultural Planting Materials.Primary Cells and Batteries Acid Cells and Batteries .Tensile Lap Shear Strength Adhesives .Primary Cells and Batteries .Valve Regulated Types Acoustics .Surface Treatment .Pitting Corrosion Aluminium and Aluminium Alloys .Loudness Level Adhesives .Lead-acid Starter Batteries Acid Cells and Batteries .Floating-roller Method Adhesives .Surface Treatment Aluminium and Aluminium Alloys .Surface Treatment Aluminium and Aluminium Alloys .Primary Cells and Batteries Acid Cells and Batteries .Subject Acid Cells and Batteries .Primary Cells and Batteries Acid Cells and Batteries .Surface Treatment .Secondary Cells and Batteries Acid Cells and Batteries .Coating on Metallic Materials Aluminium and Aluminium Alloys .Chromate Conversion Coatings Aluminium and Aluminium Alloys .Surface Treatment Aluminium and Aluminium Alloys .Primary Cells and Batteries Acid Cells and Batteries .Dry Cells Size "D" Acid Cells and Batteries .Lead-acid Starter Batteries Acid Cells and Batteries .Anodic Oxide Coatings Aluminium and Aluminium Alloys .Secondary Cells and Batteries Acid Cells and Batteries .Surface Treatment .Shear Behaviour of Structural Adhesives Adhesives .Surface Treatment .General Requirements Acid Cells and Batteries .Secondary Cells and Batteries Acid Cells and Batteries .Good Agricultural Practices .Good Nursery Practice Aluminium and Aluminium Alloys .Rating system .Compliance Criteria .Good Agricultural Practices .Metallic/Substrate Coatings GS 969-1 : 2009 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 3613 : 2000Ψ 8993 : 1989Ψ 8994 : 1989Ψ 8251 : 1987Ψ 7599 : 1983Ψ 3211 : 1977Ψ 3210 : 1983Ψ 3892 : 2000Ψ 4543 : 1981Ψ 4536 : 1985Ψ 325 .Solvents for Assembly Adhesives .Thick Adherends Agricultural Implements .Lead Acid Starter Batteries Acid Cells and Batteries .Surface Treatment .Metallic Coatings-General Rules Aluminium and Aluminium Alloys .Secondary Cells and Batteries Acid Cells and Batteries .Secondary Cells and Batteries Acid Cells and Batteries .Sampling Adhesives .Matchets Agricultural Implements .Anodizing Aluminium Aluminium and Aluminium Alloys .Alkaline Secondary Cells and Batteries Acid Cells and Batteries .Standard Laboratory Ageing Adhesives . Flavoured Beverages .Alcoholic Beverages .Alcoholic Beverages .Non-Alcoholic Beverages .Apple Juice Beverages .Non-Alcoholic Beverages .Concentrated Beverages .Code of Practice Beverages .Bioalcohol .Alcoholic Beverages .Apple Juice .Alcoholic Beverages .Apricot.Sand and Grit Blasting Animal Feeding Stuff .Instant Tea in Solid Form . Peach and Pear Nectars Beverages .Labrusca Beverages .Guava Nectar Beverages .Surface Treatment .Alcoholic Beverages .Non-Alcoholic Beverages .Non-Alcoholic Beverages .Black Currant Juice Beverages .Non-Alcoholic Beverages .Potable Spirit for Blending Purposes Beverages .Bioalcohol Automotive Fuels .Grape Juice Beverages .Subject Aluminium and Aluminium Alloys .Whisky Beverages .Instant Tea .Non-Alcoholic Beverages .Sampling Standard Number GS ISO GS ISO 3868 : 1976Ψ 3861 : 2005Ψ Page 174 174 5 5 58 58 58 2 57 58 52 9 4 4 8 5 52 34 39 40 39 40 40 41 41 9 1 38 38 41 38 39 229 229 229 40 GS 106-2 : 1991(2005) GS 106-1 : 2007 GS 946 : 2008 GS 945 : 2008 GS 944 : 2008 GS 65 : 2005 GS 931 : 2008 GS 943 : 2008 GS 855 : 2007 GS 169 : 1995 GS 102 : 2004 GS 103 : 2004 GS 155 : 2004 GS 104 : 2004 GS 854 : 2007 GS 590 : 2007 GS 707 : 2003 GS 716 : 2003 GS 711 : 2003 GS 719 : 2003 GS 718 : 2003 GS 724 : 2003 GS 723 : 2003 GS 168 : 1995 (2005) GS 6 : 1970 GS 705 : 2003 GS 709 : 2003 GS 722 : 2003 GS 708 : 2003 GS 712 : 2003 GS ISO GS ISO 7513 : 1990Ψ 7516 : 1984Ψ 7514 : 1990Ψ Beverages .Non-Alcoholic Beverages .Fruit Nectars Beverages .Akpeteshi (Local Gin) Beverages .Black Currant Juice .Alcoholic Beverages .Methods of Test for Poultry Feeds Animal Feeding Stuff .Determination of Total Ash GS ISO Beverages .Non-Alcoholic Beverages .Akpeteshi (Local Gin) .Non-Alcoholic Beverages .Beer Beverages .Aperitif Beverages .Poultry Feed Automotive Fuels .Gin Beverages .Concentrated Beverages .Biodiesel Fuel (B100) Beverages .Wines .Non-Alcoholic Beverages .Alcoholic Beverages .Lemon Juice GS 720 : 2003 326 .Wines Beverages .Non-Alcoholic Beverages .Concentrated Beverages .Alcoholic Beverages .Alcoholic Beverages .Denatured Fuel Ethanol Automotive Fuels .Non-Alcoholic Beverages .Alcoholic Beverages .Non-Alcoholic Beverages .Non-Alcoholic Beverages .Determination of Moisture Content Beverages .Non-Alcoholic Beverages .Brandy Beverages .Non-Alcoholic Beverages .Fruit Juices Beverages .Fruit Squashes and Fruit Cordials Beverages .Grape Juice .Non-Alcoholic Beverages .Grapefruit Juice Beverages .Instant Tea .Non-Alcoholic Beverages .Grape Juice .Methods of Test Beverages .Non-organic Coatings Aluminium and Aluminium Alloys .Alcoholic Beverages .Surface Treatment .Grape Juice Beverages . Aluminium Roofing Sheets Building and Construction Materials .Non-Alcoholic Beverages .Precast Concrete Blocks Building and Construction Materials .Concentrated Beverages .Nectars of certain Citrus Fruits Beverages .Pineapple Juice .Pineapple Juice .Gap Test Piece Building and Construction Materials .Fruit Juice Beverages .Orange Juice Beverages .Reinforcement of Concrete .Concentrated Beverages .Malt Drinks Beverages .Non-Alcoholic Beverages .Chemical Analysis Building and Construction Materials .Portland Limestone Cement Building and Construction Materials .Pulpy Mango Beverages .Pineapple Juice Beverages .Reinforcement of Concrete .Calcined Clay Based Building and Construction Materials .Non-Alcoholic Beverages .Cement .Calcined Clay Pozzolana Building and Construction Materials .Cement .Test Methods Building and Construction Materials .Non-carbonated Soft Drinks Beverages .Non-Alcoholic Beverages .Non-Alcoholic Beverages .Subject Beverages .Metallic Contaminants .Non-Alcoholic Beverages .Filler Metals Brazing and Soldering .Cement .Aluminium / Zinc .Non-Alcoholic Beverages .Non-Alcoholic Beverages .Tomato Juice Beverages .Non-Alcoholic Beverages .Orange Juice .Coated Corrugated Steel Sheets Building and Construction Materials .Portland Building and Construction Materials .Non-Alcoholic Beverages .Non-Alcoholic Beverages .Burnt Bricks Building and Construction Materials .Reinforcement of Concrete .Plain Bars Building and Construction Materials .Ribbed Bars Building and Construction Materials .Cement .Pulpy Blackcurrent Nectar Beverages .Peaches Beverages .Pulpy Nectars Beverages .Non-Alcoholic Beverages .Non-Alcoholic Beverages .Portland Limestone Building and Construction Materials .Time Setting and Soundness Standard Number GS 239 : 2001 GS 305-1 : 1997 GS 710 : 2003 GS 721 : 2003 GS 201 : 2003 GS 706 : 2003 GS 715 : 2003 GS 20 : 1970 Page 16 20 39 41 12 38 40 1 38 40 39 40 41 10 41 41 10 193 192 55 49 19 47 47 48 1 1 11 60 126 1 46 GS 704 : 2003 GS 714 : 2003 GS 713 : 2003 GS 717 : 2003 GS 726 : 2003 GS 176 : 1999 GS 727 : 2003 GS 725 : 2003 GS 186 : 2007 GS ISO GS ISO 5187 : 1985Ψ 5179 : 1983Ψ GS 914 : 2011 GS 803 : 2009 GS 297-1 : 2010 GS 788-1 : 2008 GS 788-2 : 2008 GS 788-3 : 2008 GS GS 25 : 2008 30 : 2010 GS 192 : 2003 GS 964 : 2009 GS ISO GS 680 : 1990Ψ 22 : 2011 GS 766 : 2011 GS PAS GS 2 : 2007 323 2 126 252 42 : 1972 679 : 1989Ψ 9597 : 1989Ψ GS ISO GS ISO 327 .Non-Alcoholic Beverages .Cement .Cement .Sodium Hypochlorite Solution Brazing and Soldering .PracastSandcrete Blocks Building and Construction Materials .Concentrated Beverages .Welded Fabric Building and Construction Materials .Non-Alcoholic Beverages .Portland Pozzolana Cement .Vegetable Juices Bleaching Agent .Soft Drinks Beverages .Portland Limestone (CEM II/BL{LL}) Building and Construction Materials .Cement .Non-Alcoholic Beverages .Non . Sandcrete Blocks Bushings .Termination Cables .Electric .PVC .PVC .PVC Compounds Cables .Electric and Optical Cables .Insulating Materials .Lift Cables Cables .General Application Cables .PVC Compounds Cables .Insulating Materials .General Application Cables .PVC .PVC Compounds Cables .Test Methods Cables .General Application Cables .Insulating Materials .Ribbed Bars Building and Construction Materials .Seismic Qualification Cables .Portland Cement Concrete-Natural pozzolana -Test Building and Construction Materials .General Requirements Cables .PVC .Conductors Cables .Flexible Cables Cables .General Application Cables .General Application Cables .General Application .Circular Copper Conductors Cables .Rated Voltages Cables .Dimensions Cables .Subject Building and Construction Materials .Electric and Optical .PVC .Flexible Cords Cables .Plain Bars Building and Construction Materials .Insulating Materials .Mineral Insulated Cables .Insulating Materials .Insulating Materials .Portable Earthing Equipment Cables .Insulated .Shrinkage Test Cables .Test Methods for Sheathing Materials Cables .Mineral Insulated .PVC Compounds Cables .Insulating Materials .Dimensions Cables .Insulating Materials .Insulating Materials .Power Accessories .Insulating Materials .Portable Earthing Equipment Cables .Non-sheathed Cables Cables .PVC Compounds Cables .Insulating Materials .Insulating Materials .PVC .Sheathed Cables Standard Number GS ISO Page 219 66 219 11 112 100 97 97 104 101 101 92 101 101 101 101 101 101 101 102 102 102 102 101 100 100 107 107 108 92 91 91 91 91 91 6935-1 : 2007Ψ GS C 311 : 2005Ψ GS ISO 6935-2 : 2007Ψ GS 189 : 2000 GS IEC TS 61463 : 2000Ψ GS IEC 60719 : 1992Ψ GS IEC 60471 : 1977Ψ GS IEC 60471 : 1980 GS IEC 60885-1 : GS IEC 60811-1-1 : GS IEC 60811-1-3 : GS IEC 60228 : 2004Ψ GS IEC 60811-31 : 1985 GS IEC 60811-1-4 : GS IEC 60811-1-4 : GS IEC 60811-1-2 : GS IEC 60811-1-2 : GS IEC 60811-1-4 : GS IEC 60811-1-2 : GS IEC 60811-3-1 : GS IEC 60811-3-1 : GS IEC 60811-3-2 : GS IEC 60811-3-2 : GS IEC 60811-3-2 : GS IEC 60702-1 : GS IEC 60702-2 : GS IEC 61138 : 1995 GS IEC 61138 : 1994Ψ GS IEC 61442 : 2005Ψ GS IEC 60227-7 : GS IEC 60227-5 : GS IEC 60227-1 : GS IEC 60227-6 : GS IEC 60227-3 : GS IEC 60227-4 : 328 .General Application Cables . Pulses and Derived Products . Pulses and Derived Products .Instant Noodles Standard Number GS IEC 60227-2 : GS IEC 60502-1 : GS IEC 60502-2 : GS IEC 60245-1 : GS IEC 60245-4 : GS IEC 60724 : 2000Ψ GS ISO 8062 : 1994Ψ Page 92 97 97 92 92 100 235 22 5 271 271 271 226 214 17 69 1 42 33 42 63 42 235 49 50 50 73 148 1 59 214 214 214 214 124 56 GS 327 : 2004 GS 117 : 1990 (2006) GS ISO 13006 : 1998Ψ GS ISO 13007-1 : GS ISO 13007-2 : GS ISO GS ISO 7305 : 1998Ψ 6644 : 2002Ψ GS 266 : 2003 GS CODEX STAN 18 : GS 27 : 1970 GS 731 : 2003 GS 577 : 2009 GS 730 : 2003 GS 1004 : 2011 GS 729 : 2003 GS ISO 7973 : 1992Ψ GS 809 : 2006 GS 812 : 2006 GS 811 : 2006 GS CODEX STAN 188 : GS ISO GS 2164 : 1975Ψ 11 : 1970 GS 948 : 2008 GS ISO GS ISO GS ISO GS ISO GS ISO 6639-4 : 1987Ψ 6639-3 : 1986Ψ 6639-2 : 1986Ψ 6639-1 : 1986Ψ 605 : 1991Ψ GS 921 : 2007 329 .Canned Sweet Corn Cereals. Pulses and Derived Products . Pulses and Derived Products .Subject Cables .Fresh Baby Corn Cereals.Impurities. Pulses and Derived Products .Certain Pulses Cereals. Pulses and Derived Products . Characteristics and Marking Ceramic Tiles . Pulses and Derived Products .Determination of Fat Acidity Cereals. Pulses and Derived Products . Classifications. Pulses and Derived Products .Hidden Insect Infestation Determination Cereals.Definitions. Pulses and Derived Products . Cereals.PVC . Pulses and Derived Products . Pulses and Derived Products .Automatic Sampling by Mechanical Means Cereals.Rated Voltages Cables . and Insects Cereals. Pulses and Derived Products .Couscous Cereals.Rated Voltages Cables .Green Wax Beans Cereals.Fortificant Premix Wheat Flour Cereals. Foreign odours. Size. Pulses and Derived Products .Biscuit Cereals.Fortified Strong Wheat Flour Cereals.Rubber Insulated Cables .Corn Flakes Cereals.Hidden Insect Infestation Determination Cereals.Hidden Insect Infestation Determination Cereals. Pulses and Derived Products .Assessment of Burning Characteristics Cellular Materials . Pulses and Derived Products . Pulses and Derived Products . Pulses and Derived Products .Short Circuit Castings .Limit and Fits Cellular Materials .Canned Sweet Corn Cereals.Rubber Insulated Cables .Glycosidic Hydrocyanic Acid Determination Cereals.Hausa Koko Flour Cereals. Pulses and Derived Products .Cowpea Grains Cereals.Flour Viscosity Cereals. Pulses and Derived Products .Grouts and Adhesives Cereals.Grouts and Adhesives Ceramic Tiles . Pulses and Derived Products . Pulses and Derived Products . Pulses and Derived Products .Flexible Polyurethane Foam Ceramic Tiles .Fortified Soft Wheat Flour Cereals.Degermed Maize and Maize Grits. Pulses and Derived Products .Test Methods Cables .Hidden Insect Infestation Determination Cereals. White Bread Cereals.Rapid Drying Cereals. Pulses and Derived Products . Pulses and Derived Products . Cereals. Pulses and Derived Products . Pulses and Derived Products .Maize Cereals. Pulses and Derived Products . Pulses and Derived Products .Evaluation of Gelatinization Time Cereals. Pulses and Derived Products .Strong Wheat Flour Cereals.Wheat and Durum Wheat Cereals.Methods of Test for Wheat Flour Cereals. Pulses and Derived Products .Moisture Content Determination GS 547 : 2008 GS 738 : 2007 GS 739 : 2007 GS 737 : 2007 GS ISO GS ISO 1114 : 1977Ψ 2291 : 1980Ψ 330 . Pulses and Derived Products .Cut Test Cocoa and Cocoa Products .Pasta Cereals.Soft Wheat Flour Cereals.Maize Meal.Cocoa Beans Cocoa and Cocoa Products . Pulses and Derived Products .Wheat Semolinas and Alimentary Pasta Cereals. Pulses and Derived Products .Cocoa (Cocao) Mass (Cocoa / Chocolate Liquor) and Cocoa CakeGS 740 : 2007 Cocoa and Cocoa Products .Wheat Flour.Wheat Semolina. Pulses and Derived Products .Sampling Grain Cereals.Oats Cereals. Pulses and Derived Products .Impurities of Animal Origin Cereals.Bean Sampling Cocoa and Cocoa Products .Sampling Cereals.Sorghum Cereals. Pulses and Derived Products . Pulses and Derived Products . Pulses and Derived Products . Pulses and Derived Products . Pulses and Derived Products .Milled Rice Cereals. Pulses and Derived Products . Pulses and Derived Products .Gluten Content. Pulses and Derived Products .Sorghum Flour Cereals.Soy Flour Cereals.Millet Grains Cereals.Determination of Tannin Content Cereals.Roasted Maize Flour (Tom Brown) Cereals.Composite and Filled Chocolate Cocoa and Cocoa Products . Pulses and Derived Products .Wheat Flour.Chocolate Standard Number GS 211 : 2003 GS 735 : 2003 GS GS 59 : 1997 (2005) 61 : 1990 Page 13 43 2 2 42 33 33 42 46 280 53 275 2 4 4 252 42 53 206 10 42 290 290 264 226 17 61 151 43 43 32 43 43 43 134 151 GS 734 : 2003 GS 576 : 2003 GS 579 : 2007 GS 728 : 2003 GS 765 : 2003 GS ISO 14864 : 1998Ψ GS 883 : 2008 GS ISO 13690 : 1999Ψ GS GS GS 60 : 2005 95 : 2004 96 : 1990 (2005) 9648 : 1988Ψ GS ISO GS 732 : 2003 GS 879 : 2009 GS ISO 6322-1 : 1996Ψ GS 187 : 2004 GS 733 : 2003 GS ISO 21415-4 : GS ISO 21415-3 : GS ISO 11050 : 1993Ψ GS ISO 7304 : 1985Ψ GS 265 : 2001 GS 979 : 2009 GS ISO 2292 : 1973Ψ GS 741 : 2007 Cocoa and Cocoa Products . Pulses and Derived Products . Pulses and Derived Products .Cocoa Butters Cocoa and Cocoa Products . Pulses and Derived Products .Cocoa Powders and Dry Mixtures of Cocoa and Sugars Cocoa and Cocoa Products .Gluten Content-Oven Drying Cereals.Pearl Millet Flour Cereals.Rice Kernels . Pulses and Derived Products .Sorghum .Storage Cereals.Subject Cereals.Whole Wheat Flour Cocoa and Cocoa Products .Rice Cereals. Pulses and Derived Products . Green .Moisture Content Coffee and Coffee Products .General Conformity Assessment .Equipment Standard Number GS 736 : 2007 GS ISO 10095 : 1992Ψ GS ISO 4052 : 1983Ψ Page 43 255 179 262 249 215 180 268 215 268 167 241 173 173 301 302 301 302 302 297 302 301 14 14 14 46 14 18 18 18 15 17 289 16 20 145 GS ISO 10470 : 2004Ψ GS ISO GS ISO GS ISO 9116 : 2004Ψ 6667 : 1985Ψ 4149 : 2005Ψ GS ISO 11292 : 1995Ψ GS ISO 6670 : 2002Ψ GS ISO 11817 : 1994Ψ GS ISO GS ISO GS ISO GS ISO 3509 : 2005Ψ 8573-1 : 2001Ψ 3857-2 : 1977Ψ 3857-1 : 1977Ψ GS ISO/IEC GUIDE 27 : GS ISO/IEC GUIDE 60 : GS ISO/IEC GUIDE 7: GS ISO/IEC GUIDE 67 : GS ISO/IEC GUIDE 65 : GS ISO/IEC 17025 : GS ISO/IEC GUIDE 28 : GS ISO/IEC GUIDE 23 : GS 227-1 : 2006 GS 227-2 : 2006 GS 227-3 : 2006 GS 777 : 2004 GS 225 : 2004 GS 285 : 2004 GS 281 : 2006 GS 284 : 2004 GS 228 : 2004 GS 258 : 2006 GS ISO 20127 : 2005Ψ GS 254 : 2004 GS 303 : 2008 GS ISO 1942-4 : 1989Ψ 331 .Green .Codes of Practice .Code Conformity Assessment .Free and Total Carbohydrate Contents Coffee and Coffee Products .Vocabulary .List of Substances Cosmetics .Colognes and Perfumes Cosmetics .Instant .Olfactory and Visual Examination Coffee and Coffee Products .Insect Damaged Beans Coffee and Coffee Products .Skin Creams Dentistry .Hair Conditioners Cosmetics .Specification for Cocoa Butter Confectionery Coffee and Coffee Products .Sampling Coffee and Coffee Products .Toothpaste Dentistry .Guidelines on Specification Coffee and Coffee Products .Compressors Compressors .Tooth Brushes Dentistry .Hair Pomade Cosmetics .Good Practice .Powered Toothbrushes Dentistry .Product Certification Fundamentals Conformity Assessment .Guidelines for Drafting Standards Conformity Assessment .Green .Third-Party Certification for Products.Vocabulary .Setting Lotion Cosmetics .Vocabulary Compressed Air .Contaminants and Purity Classes Compressors .Codes of Practice .Hair Relaxing Creams Cosmetics .Testing and Calibration Laboratories Conformity Assessment .Caffeine Content Coffee and Coffee Products .Guidance Conformity Assessment .Code of Good Manufacturing Practice Cosmetics .Detergent Base Shampoo Cosmetics .Subject Cocoa and Cocoa Products .Product Certification Systems Conformity Assessment .Instant .Misuse of Mark of Conformity Conformity Assessment .Vocabulary .List of Substances Cosmetics .Defect Reference Chart Coffee and Coffee Products .Caffeine Content Coffee and Coffee Products .Third-Party Certification Systems Cosmetics .Corrective Action .Green .Requirement .Roasted Ground . Rotation Electrical Machines Electrical Appliances .Guidance for the Design and Performance Electrical Engineering .Portable Residual Current Devices Electrical Appliances .Photovoltaic Systems Electrical Engineering .Over Current Protection Devices Electrical Appliances .Air Conditioners and Heat Pumps Electrical Engineering .Rotating Electrical Machines Electrical Appliances .Fans Electrical Appliances .Vocabulary .Overvoltage Protection .Stand -Alone .Generating Systems .Domestic Iron Electrical Appliances .Safety Requirements Electrical Appliances .Electrical and Electronic Testing.Immersion Water Heater Electrical Appliances .Industrial Fans Electrical Appliances .Wire Socket Ropes Electrical Appliances .Sockets Electrical Appliances .Insulation Materials Electrical Engineering .Air Compressors Electrical Engineering .Installations Electrical Appliances .Automatic Electrical Controls Electrical Engineering .Machines .Data Fields in Title Blocks Documentation .PV Systems Electrical Appliances .Electromagnetic Emissions Electrical Engineering .Vocabulary .Switches . Electrical Appliances .General Requirements Electrical Appliances .Materials Documentation .Switches .Presentation of Ghana Standards Electrical Appliances .Power Protection Systems Electrical Appliances .Compressors Electrical Engineering .Wire Sockets Electrical Engineering .Over Current Protection Devices Electrical Appliances .Insulation Materials Electrical Engineering . Electrical Engineering .Guidelines .Measurement Standard Number GS ISO GS ISO GS ISO Page 145 145 224 64 6 212 32 17 271 152 106 106 106 107 108 87 87 1 164 98 98 164 163 107 195 191 100 195 87 111 96 98 87 87 1942-1 : 1989Ψ 1942-2 : 1989Ψ 7200 : 2004Ψ GS 1012 : 2011 GS 143 : 1992 GS ISO 6580 : 2005Ψ GS 536 : 2002 GS 263 : 1994 GS ISO 13351 : 1996Ψ GS ISO 2360 : 2003Ψ GS IEC 61009-2-1 : GS IEC 61009-1 : GS IEC 61009-2-2 : GS IEC 61173 : 1992Ψ GS IEC 61540 : 1999Ψ GS IEC TS 60034-17 : GS IEC 60034-12 : 2007Ψ GS GS ISO 2 : 1969 3189-2 : 1985Ψ GS IEC 60669-1 : GS IEC 60669-2-1 : GS ISO GS ISO 3189-3 : 1985Ψ 3189-1 : 1985Ψ GS IEC 61194 : 1992Ψ GS ISO GS ISO 5388 : 1981Ψ 5151 : 1994Ψ GS IEC 60730-2-10 : GS ISO 5390 : 1977Ψ GS IEC 60060-1 : GS IEC CISPR 30 : 2001Ψ GS IEC 60372 : 2003 GS IEC 60587 : 1984Ψ GS IEC TS 60034-25 : GS IEC 60051-1 : 332 .General and Clinical Terms Dentistry .Over Current Protection Devices.Subject Dentistry .Non-Condusctive Coatings Electrical Appliances . Tests Electrical Engineering .Metering Equipment Electrical Engineering .Accessories Electrical Engineering .Oil Filled and Gas Pressure Cables Electrical Engineering .Plugs and Sockets .Pressure Cables .Operator Electrical Engineering .Stabilized Power Supply .Partial Discharge Electrical Engineering .Requirements Electrical Engineering .Metering Equipment Electrical Engineering .Plugs and Sockets .Protection against Electric Shocks Electrical Engineering .Plugs and Sockets .Industrial Purposes Electrical Engineering .Outlets without Interlock Electrical Engineering .Switchgear and Controlgear .Rotating Electrical Machines Electrical Engineering .AC Transmission Electrical Engineering .Outlets Electrical Engineering .Power Distribution Lines Electrical Engineering .High Voltage Standard Number GS IEC 61083-1 : GS IEC 60270 : 2000Ψ Page 106 92 110 110 110 110 107 90 90 90 90 109 105 104 108 103 111 103 103 93 105 103 104 103 104 107 1 95 95 88 90 103 110 106 99 111 GS IEC 62053-21 : 2003Ψ GS IEC 62053-22 : 2003Ψ GS IEC 62053-61 : 1998Ψ GS IEC 62052-11 : 2003Ψ GS IEC 61227 : 1993Ψ GS IEC 60141-2 : GS IEC 60141-3 : 1967 GS IEC 60141-1 : 1998 GS IEC 60141-1 : 1995 GS IEC 61702 : 1995Ψ GS IEC 60904-5 : GS IEC 60891 : 1987Ψ GS IEC 61683 : 1999Ψ GS IEC 60884-2-5 : GS IEC TR 60083 : 2004Ψ GS IEC 60884-2-1 : GS IEC 60884-1 : GS IEC 60309-1 : GS IEC 60906-1 : GS IEC 60884-2-2 : GS IEC 60884-2-6 : GS IEC 60884-2-3 : GS IEC 60889 : 1987Ψ GS IEC 61166 : 1993Ψ GS 1 : 2001 GS IEC 60364-4-41 : GS IEC 60364-7-712 : GS IEC 60072-3 : GS IEC 60146.High-Voltage Test Techniques .Measurement Electrical Engineering .Photovoltaic .Switchgear and Controlgear .1-1 : GS IEC 60865-2 : GS IEC 62040-3 : GS IEC 60932 : 1988Ψ GS IEC 60694 : 2002Ψ GS IEC 62271-100 : 333 .Outlets with Interlock Electrical Engineering .Filled and Gas .Open -Circuit Voltage Method Electrical Engineering .Oil .Fused Electrical Engineering .Metering Equipment Electrical Engineering .High Voltage Electrical Engineering .Metering Equipment Electrical Engineering .Accessories Electrical Engineering .Photovoltaic Systems .Power Transmission Electrical Engineering .Power Conditioners .Switchgear and Controlgear .Plugs and Sockets .Oil .Enclosed Electrical Engineering .Filled and Gas .Oil Filled and Gas-Pressure Cables .Power Transmission .Photovoltaic Devices .Adaptors Electrical Engineering .UPS Performance Test Electrical Engineering .Photovoltaic Devices -Procedure for Correction Electrical Engineering .Plugs and Sockets .Plugs and Sockets .Control Rooms .Plugs and Sockets .Plugs and Sockets .Puming Systems Electrical Engineering .Procedure Electrical Engineering .Semiconductor Converters .General Requirements Electrical Engineering .Plugs and Sockets .Subject Electrical Engineering .Requirements for Special Installations Electrical Engineering .Measurement .Short Circuits Currents Electrical Engineering .Nuclear Power Plants .Outlets Electrical Engineering .Pressure Cables .Domestic Electrical Engineering . Bolts and Screws Fasteners .Style 2 Fasteners .Pins .Style 2 Fasteners .Nuts .Metric Fasteners .Nuts .Coarse thread Fasteners . Studs and Nuts Fasteners .Style 2.Torque Type Hexagon . Screws.Thermal Environment Fasteners .Pins .Nuts .Metric Fine Pitch Fasteners . Screw.Hexagon Products Fasteners .Pins .General Guidelines Environmental Management Systems .ISO Metric Thread Fasteners .Vocabulary Ergonomic .Grooved Fasteners .Principles Ergonomics .Designation System Fasteners .Mechanical Properties .Nuts .Bolts Fasteners .Nuts .Mechanical Properties .Grooved Standard Number Page 87 277 277 278 139 250 208 232 245 129 247 189 247 120 189 246 130 130 242 242 242 221 231 221 221 221 244 244 245 245 244 244 244 244 244 243 GS IEC 60034-26 : 2006Ψ GS ISO 14004 : 2004Ψ GS ISO 14001 : 2004Ψ GS ISO 14050 : 2002Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 1503 : 2008 9241-1 : 1997Ψ 6385 : 2004Ψ 7726 : 1998Ψ 8765 : 1999Ψ 885 : 2000Ψ 8992 : 2005Ψ 4759-1 : 2000Ψ 8991 : 1986Ψ 272 : 1982Ψ 4753 : 1999Ψ 8839 : 1986Ψ 898-2 : 1992Ψ 898-6 : 1994Ψ 8673 : 1999Ψ 8674 : 1999Ψ 8675 : 1999Ψ 7042 : 1997Ψ 7720 : 1997Ψ 7043 : 1997Ψ 7040 : 1997Ψ 7041 : 2002Ψ 8742 : 1997Ψ 8745 : 1997Ψ 8747 : 1997Ψ 8749 : 1986Ψ 8744 : 1997Ψ 8746 : 1997Ψ 8743 : 1997Ψ 8741 : 1997Ψ 8740 : 1997Ψ 8739 : 1997Ψ 334 .Torque Type Hexagon .Spatial orientation .Bolts.Thin .Grooved Fasteners .Pins .Grooved Fasteners .Unbalanced Voltages Environmental Management Systems .Pins .Bolts.Metric Fine Pitch Thread Fasteners .Torque Type All-Metal Hexagon Fasteners .Pins .Subject Electrical Engineering .Flange Fasteners .Pins .Requirements Environmental Management Systems .Grooved Fasteners .Hexagon Nuts.requirements Ergonomics .Fine Pitch thread Fasteners .Grooved Fasteners .Mechanical Properties . Screws.Nuts .Torque Type All-Metal .Torque Type Hexagon .Nuts . Studs and Nuts Fasteners .Grooved Fasteners . Studs Fasteners .Office Work with VDT Ergonomics .Grooved Fasteners .Pins .Nuts .Grooved Fasteners .Nuts .Bolts.Pins . . Style 1 .Pins .Style 1 Fasteners .Grooved Fasteners . Clevis Pins .Slotted Set .Product Grade Fasteners .Fortified Oils Fats and Oils .Fatty Acids Fats and Oils . Screws and Nuts Fats and Oils .Pins .Large Series .Product Grade A Fasteners .Edible Palm Oil Fats and Oils .Butylhydroxyanisole and Butylhydroxytoluene Fats and Oils .Antioxidants Fats and Oils .Chamfered .Fats and Oils not covered by Individual Standards.Washers .Subject Fasteners .Normal Series .Washers .Product Grade C Fasteners .Butter Fat Index Determination Fats and Oils .Edible Palm Olein Fats and Oils .Animal and Vegetable Fats and Oils Fats and Oils .Product Grade A Fasteners .Butter Salt Content Determination Fats and Oils .Washers .Screws .Extra Large Series .Pins .Product Grade C Fasteners .Normal Series .Cross Recesses Fasteners .Pins .Pins .Product Grade A Fasteners .Parellels Fasteners .Parellels Fasteners .Butter Moisture Content Determination Fats and Oils .Determination of Water Content Fats and Oils .Taper Fasteners .Washers .Parellels Fasteners .Washers .Insoluble Impuriies Content Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS 8734 : 1997Ψ 8735 : 1997Ψ 8733 : 1997Ψ 8736 : 1986Ψ 8737 : 1986Ψ 4757 : 1983Ψ 7435 : 1983Ψ 3508 : 1976Ψ 7090 : 2000Ψ 8738 : 1986Ψ 7094 : 2000Ψ Page 243 243 243 243 243 189 228 167 222 243 223 223 223 222 222 223 189 125 1 198 217 142 142 171 172 209 130 12 14 12 12 69 216 49 50 125 7093-1 : 2000Ψ 7093-2 : 2000Ψ 7089 : 2000Ψ 7091 : 2000Ψ 7092 : 2000Ψ 4759-3 : 2000Ψ 660 : 1996Ψ 14 : 1970 5558 : 1982Ψ 6884 : 1985Ψ 1739 : 2006Ψ 1738 : 2004Ψ 3727-1 : 2001Ψ 3727-2 : 2001Ψ 6463 : 1982Ψ 934 : 1980Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS 202 : 2001 GS 223 : 2005 GS 203 : 2001 GS 204 : 2001 GS CODEX STAN 19 : GS ISO 6800 : 1997Ψ GS 810 : 2006 GS 813 : 2006 GS ISO 663 : 2007Ψ 335 .Product Grade A Fasteners .Fortificant Premix for Vegetable Oil Fats and Oils .Edible Palm Stearin Fats and Oils .Butter Non-Fat Solids Determination Fats and Oils .Large Series .Washers .Screws .Thread .Taper Fasteners .Ash Determination Fats and Oils .Edible Ground Nut Oil Fats and Oils .Washers .Run-outs Fasteners .Washers for Bolts.Acid Value Acidity Fats and Oils .Washers . Fats and Oils .Normal Series .Pins .Long Dog Point Fasteners .Small Series .Product Grade C Fasteners . Oilseed Residue .Oilseeds .Ignitability of Materials and Products Fire Hazards .Iodine Value Fats and Oils .Methyl Esters .Oilseeds .Edible Oils Fats and Oils .Oilseed .Named Animal Fats Fats and Oils .Moisture and Volatile Matter Content Fats and Oils .Analysis Fats and Oils .Test Sample Fats and Oils .Methyl Esters .Polyunsaturated Fatty Acids Fats and Oils .Impurities Content Determination Fats and Oils .Refrective Index Fats and Oils .Olive Oil. Virgin and Refined.Saponification Value Fats and Oils .Unsaponifiable Matter Fire Hazards .Ignitability of Materials and Products Fire Hazards .Subject Fats and Oils .Named Vegetable Oils Fats and Oils .Ignitability of Materials and Products Fire Hazards .Ignitability of Materials and Products Fire Hazards .UltravoiletAbsorbence Fats and Oils .Sampling Fats and Oils .Preparation Fats and Oils .Test Sampling Fats and Oils .Polar Compounds Fats and Oils .Metallic Contaminants.Canned Tuna and Tuna Products Standard Number GS ISO GS ISO 3961 : 1996Ψ 6321 : 2002Ψ Page 175 206 20 196 196 125 74 31 128 128 125 126 125 125 125 67 217 175 261 238 232 206 198 170 281 237 125 131 169 168 99 99 99 99 99 12 GS 305-5 : 1997 GS ISO GS ISO GS ISO 5508 : 1990Ψ 5509 : 2000Ψ 662 : 1998Ψ GS CODEX STAN 211 : GS 525 : 2003 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 734-1 : 2006Ψ 734-2 : 1998Ψ 658 : 2002Ψ 665 : 2000Ψ 659 : 1998Ψ 664 : 1990Ψ 542 : 1990Ψ GS CODEX STAN 33 : GS ISO GS ISO 6886 : 2006Ψ 3960 : 2007Ψ GS ISO 10540-2 : GS ISO GS ISO GS ISO GS ISO GS ISO 8420 : 2002Ψ 7847 : 1987Ψ 6320 : 2000Ψ 5555 : 2001Ψ 3657 : 2002Ψ GS ISO 15301 : 2001Ψ GS ISO GS ISO GS ISO GS ISO GS ISO 8292 : 1991Ψ 661 : 2003Ψ 935 : 1988Ψ 3656 : 2002Ψ 3596 : 2000Ψ GS IEC 60695-11-10 : GS IEC 60695-2-12 : GS IEC 60695-2-13 : GS IEC 60695-2-11 : GS IEC 60695-2-10 : GS 207 : 2011 336 .Moisture Determination Fats and Oils . and for Refined Olive-Pomace Oil Fats and Oils .Oilseeds.Oxidation Stability Fats and Oils .Phosphorous Content Fats and Oils .Oilseeds .Peroxide Value Fats and Oils .Ignitability of Materials and Products Fish and Fishery Products .Melting Point Fats and Oils .Oil Content Determination Fats and Oils .Titre Determination Fats and Oils .Solid Fat Content Fats and Oils .Sampling Fats and Oils .Oilseeds .Sediments Fats and Oils .Oil Content Determination Fats and Oils .Oil Content Determination Fats and Oils . Uneviscerated and Eviscerated Fish and Fishery Products . GS FPR 1 : 2007Ψ GS 755 : 2003 GS 754 : 2003 GS 744 : 2003 GS ISO GS ISO GS ISO 3503 : 1976Ψ 3501 : 1976Ψ 3460 : 1975Ψ Page 57 44 33 45 44 71 44 45 44 45 45 45 15 44 20 15 45 87 87 45 45 44 167 166 166 57 220 220 201 220 220 185 210 227 202 201 GS 932 : 2008 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 7005-2 : 1988Ψ 7005-3 : 1988Ψ 5782-1 : 1997Ψ 6953-2 : 2000Ψ 6953-1 : 2000Ψ 4412-1 : 1991Ψ 6547 : 1981Ψ 7368 : 1989Ψ 5784-1 : 1988Ψ 5782-2 : 1997Ψ 337 .Metallic Contaminants-Fish and Sea Foods Fish and Fishery Products .Handling and Processing of Fish Fish and Fishery Products .National .Canned Sardine Fish and Fishery Products .Shrimps and Prawns .Live Lobsters Fish and Fishery Products .Copper Alloy and Composite Fluid Systems .Canned Sardine Fish and Fishery Products .Pressure Pipes Flag .Dried Shark Fins Fish and Fishery Products .Frozen Fish and Fishery Products .Fish Sticks.Polyethylene (PE) Pressure Pipes Fittings . Minced Fish Fish and Fishery Products .Canned Fish Fish and Fishery Products .Bearing Rings Fluid Systems .Ghana Flanges .Air Filters Fluid Systems .Shrimps and Prawns .Salted Fish Fish and Fishery Products .Air Pressure and Filter Regulators Fluid Systems .Canned Fish and Fishery Products .Subject Fish and Fishery Products .Air Pressure and Filter Regulators Fluid Systems .Airborne Noise Levels Fluid Systems .Cast Iron Flanges .Finfish.Compressed Air Filters Standard Number GS 929 : 2008 GS 748 : 2003 GS 568 : 2002 GS 750 : 2003 GS 747 : 2003 GS CODEX STAN 94 : GS 745 : 2003 GS 749 : 2003 GS 743 : 2003 GS 746 : 2003 GS 753 : 2003 GS 751 : 2003 GS 233 : 1997 GS 742 : 2003 GS 305-4 : 1997 GS 236 : 1997 GS 752 : 2003 GS FPR 1 : 2007/AMD.Catridge Valves Fluid Systems .Fish Fillets Fish and Fishery Products . Fish Fingers Fish and Fishery Products .Canned Salmon Fish and Fishery Products .Raw Squid Fish and fishery Products .Canned Crab Meat Fish and Fishery Products .Lobsters .Fish Fillet.Frozen Fittings .Circuits Fluid Systems .Canned Fish and Fishery Products .Regulations Fish and Fishery Products .Leakproofness Fittings .Regulation Fish and Fishery Products .Quality Control systems Fish and Fishery Products .Finfish . Filters Fluid Systems .Flow-rate Fluid Systems .Fluid Contamination Fluid Systems .Filters Fluid Systems .Cylinders Fluid Systems .Couplings Fluid Systems .Cylinder Valve Fluid Systems .Filter Elements Fluid Systems .Cylinder Barrels Fluid Systems .Cylinders .Electrical Connector Fluid Systems .Cylinders Fluid Systems .Hydraulic Fluid Power Fluid Systems .Nominal Pressures Fluid Systems .O-rings Fluid Systems .Four-Port Modular Stack Valves Fluid Systems .Cylinders Fluid Systems .Requirements Fluid Systems .Motors Fluid Systems .Cylinders Fluid Systems .Contamination Analysis Fluid Systems .Electrical Connector Fluid Systems .Hydraulic Fluid Power .General Rules Fluid Systems .Measurement Fluid Systems .Cylinder Fluid Systems .Requirements Fluid Systems .Copper Alloys Fluid Systems .Cylinders .Parallelepiped Microphone Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 3938 : 1986Ψ 4401 : 2005Ψ 6437 : 1984Ψ Page 174 184 208 225 205 183 165 192 200 223 236 263 183 255 173 173 204 200 200 184 202 171 176 207 184 177 184 232 185 160 249 248 183 184 168 185 7241-2 : 2000Ψ 6195 : 2002Ψ 4394-1 : 1980Ψ 3320 : 1987Ψ 5145 : 2004Ψ 5597 : 1987Ψ 7181 : 1991Ψ 8132 : 2006Ψ GS ISO 10099 : 2001Ψ GS ISO 4393 : 1978Ψ GS ISO 10100 : 2001Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 3807-2 : 2000Ψ 3807-1 : 2000Ψ 6072 : 2002Ψ 5599-1 : 2001Ψ 5599-2 : 2001Ψ 4400 : 1994Ψ 5784-2 : 1989Ψ 3723 : 1976Ψ 3968 : 2001Ψ 6358 : 1989Ψ 4407 : 2002Ψ 4021 : 1992Ψ 4406 : 1999Ψ 7790 : 1997Ψ 4413 : 1998Ψ 2943 : 1998Ψ 9110-2 : 1990Ψ 9110-1 : 1990Ψ 4392-1 : 2002Ψ 4399 : 1995Ψ 3601-3 : 2005Ψ 4412-3 : 1991Ψ 338 .Subject Fluid Systems .Cylinders Fluid Systems .Elastomeric Fluid Systems .Cylinder Bores and Piston Rod Diameters Fluid Systems .Exhausts Fluid Systems .Fluids Fluid Systems .Measurement Techniques Fluid Systems .Control Valves Fluid Systems .Electrical Plug Connectors Fluid Systems .Fluid Sample Fluid Systems .Cylinders . Vacuum Technology .Vacuum Technology Fluid Systems .Industrial Valves Fluid Systems .Pressure-Reducing Valves Fluid Systems .Plastic-Faced Seals Fluid Systems .Industrial Valves Fluid Systems .Actuator Fluid Systems .Valves .Valves .General Rules Fluid Systems .Valves Fluid Systems .Spectrometer Fluid Systems .Sequencers Fluid Systems .Rod Fluid Systems .Thermoplastics Food Products .Valves .Thermoplastics Fluid Systems .Bakable Flanges Fluid Systems .Valves Fluid Systems .Automatic Steam Traps Fluid Systems .Pumps and Motors Fluid Systems .Guidelines Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO Page 225 227 227 220 245 204 185 160 201 193 170 184 208 280 171 202 183 158 155 170 170 167 208 232 225 122 215 232 193 193 236 242 7 55 53 301 7241-1 : 1987Ψ 7425-2 : 1989Ψ 7425-1 : 1988Ψ 6952 : 1994Ψ 8778 : 2003Ψ 6150 : 1988Ψ 4414 : 1998Ψ 2944 : 2000Ψ 5781 : 2000Ψ 5199 : 2002Ψ 3662 : 1976Ψ 4395 : 1978Ψ 6432 : 1985Ψ GS ISO 15552 : 2004Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 3722 : 1976Ψ 5784-3 : 1989Ψ 4392-2 : 2002Ψ 2861-2 : 1980Ψ 2861-1 : 1974Ψ 3669 : 1986Ψ 3661 : 1977Ψ 3530 : 1979Ψ 6403 : 1988Ψ 7841 : 1988Ψ 7259 : 1988Ψ 521 : 2001Ψ 6704 : 1982Ψ 7842 : 1988Ψ 5210 : 1991Ψ 5209 : 1977Ψ 8233 : 1988Ψ 8659 : 1989Ψ GS 150 : 2011 GS 915 : 2007 GS 858 : 2007 GS ISO TS 22004 : 2005Ψ 339 .Automatic Steam Traps Fluid Systems .Plug Connectors Fluid Systems .Vacuum Technology .Valves .Power Systems and Components Fluid Systems .Plastic-Faced Seals Fluid Systems .Vacuum Technology Fluid Systems .Centrifugal Pumps Fluid Systems .Startability Fluid Systems .Valves Fluid Systems .Rod Cylinders Fluid Systems .Valves .Fresh Yams Food Products .Plantain Chips Food Products .Piping and Couplings Fluid Systems .Rod Cylinders Fluid Systems .Vacuum Technology .Pneumatic Fluids .Technical Specifications Fluid Systems .Pneumatic Fluid Power Fluid Systems .Valves .Potato Flakes Food Safety Management Systems .Valves .Subject Fluid Systems .Pneumatic Fluids Fluid Systems .Pumps .Sampling Fluid Systems . Food Additives .Irradiated Food Food Technology . GS CODEX STAN 146 : GS CODEX STAN 074 : GS ISO 13302 : 2003Ψ GS ISO 11037 : 1999Ψ GS 844 : 2006 GS 213 : 1998 GS 298 : 2007 GS ISO 17706 : 2003Ψ GS ISO GS ISO 6898 : 1984Ψ 6899 : 1984Ψ GS 939 : 2009 GS 974 : 2009 GS ISO GS ISO GS ISO 5517 : 1978Ψ 7466 : 1986Ψ 5520 : 1981Ψ GS ISO 17239 : 2004Ψ 340 .Flavor of Foodstuffs Food Technology .General Principles Food Technology .General Standard Food Technology .Processed Cereal .Labelling Food Technology .Presses Forging Equipment .Infant Formula and Formulas for Special Medical Purposes Intended for Food Technology .Tensile Strength and Elongation Forging Equipment .Prepackaged Foods .Ochratoxin A in Cereals Food Technology .Sampling Food Technology .Garden Eggs Fresh Fruits and Vegetables .Beach Sandals Footwear and Footwear Materials .Metallic Contaminants Food Technology .Claims Food Technology .5-Hydroxymethyfurfural Fruits and Vegetables .Subject Food Safety Management Systems .Nutrition and Health Claims .Prepackaged Foods .Food Colour Assessment Footwear and Footwear Materials Footwear and Footwear Materials . 4 : GS CODEX STAN 72 : GS 210 : 2007 GS 928 : 2008 GS 62 : 1990 (2005) GS CAC/GL 23 : 2004Ψ GS CAC/GL 2 : 2006Ψ GS ISO 15141-2 : GS CODEX STAN 1 GS CAC/RM 42 : 1969.Canned Baby foods Food Technology .Sensory Analysis .1.Nutrition Labelling .Prepackaged Foods . Rev.Labelling Food Technology .10-Phenanthroline Photometric Method Fruits and Vegetables .Guidelines Food Technology .Oranges for Processing Fruits and Vegetables .Aflatoxin in Cereals Food Technology .Irradiation Facilities for Food and Non-Food Processing Food Technology .Food Hygiene .Special Dietary .Requirements Food Technology .Labelling-Claims Food Technology .General Guidelines.Sensory Analysis .Guidelines Food Technology .Testing Accuracy Fresh Fruits and Vegetables .General Principles of Food Hygiene Food Technology .Alkalinity Fruits and Vegetables .Baking Powder Food Technology .Food Additives .Sandals Footwear and Footwear Materials .Arsenic Standard Number GS ISO 22000 : 2005Ψ GS 570 : 2007 GS ISO 16050 : 2003Ψ GS CODEX STAN 73 : GS CAC /STAN 192 : GS CODEX STAN 1 GS 66 : 1990 Page 291 33 284 71 74 68 2 66 67 71 13 57 2 67 66 281 68 69 73 71 271 263 52 13 19 287 218 218 58 61 197 228 197 286 GS CAC/GL 1 : 1991Ψ GS CAC/RCP 1.Based Foods for Infants and Young Children Food Technology . Atomic Absorption Spectrometric Method Fruits and Vegetables .Frozen Fruits and Vegetables .Ascorbic Acid Fruits and Vegetables .Brussels Sprouts .Aubergines .Broccoli .Canned Applesauce Fruits and Vegetables .Frozen Fruits and Vegetables .Frozen Fruits and Vegetables .Blueberries .Canned Mature Processed Peas Fruits and Vegetables . Fruits and Vegetables .Ash Insoluble in Hydrochloric Acid Fruits and Vegetables .Carrots .Fresh Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 6634 : 1982Ψ Page 213 210 210 128 197 213 58 74 211 30 30 29 28 211 211 71 70 68 69 72 72 68 70 70 73 71 69 73 70 70 68 2 72 73 211 57 6557-1 : 1986Ψ 6557-2 : 1984Ψ 763 : 2003Ψ 5516 : 1978Ψ 6636-2 : 1981Ψ GS 938 : 2008 GS CODEX STAN 197 : GS ISO 6560 : 1983Ψ GS 464 : 2003 GS 466 : 2003 GS 417 : 2003 GS 401 : 2003 GS ISO GS ISO 6561-2 : 2005Ψ 6561-1 : 2005Ψ GS CODEX STAN 78 : GS CODEX STAN 61 : GS CODEX STAN 17 : GS CODEX STAN 56 : GS CODEX STAN 116 : GS CODEX STAN 143 : GS CODEX STAN 16 : GS CODEX STAN 58 : GS CODEX STAN 68 : GS CODEX STAN 159 : GS CODEX STAN 81 : GS CODEX STAN 55 : GS CODEX STAN 144 : GS CODEX STAN 60 : GS CODEX STAN 62 : GS CODEX STAN 13 : GS 50 : 1973 GS CODEX STAN 99 : GS CODEX STAN 187 : GS ISO 6558-2 : 1992Ψ GS 937 : 2008 341 .Canned Mangoes Fruits and Vegetables .Canned Strawberries Fruits and Vegetables .Cadmium Content Fruits and Vegetables .Canned Dates Fruits and Vegetables .Frozen Fruits and Vegetables .Canned Tropical Fruit Salad Fruits and Vegetables .Canned Fruit Cocktail Fruits and Vegetables .Ascorbic Acid Fruits and Vegetables .Canned Mandarin Oranges Fruits and Vegetables .Canned Asparagus Fruits and Vegetables .Canned Tomatoes Fruits and Vegetables .Canned Raspberries.Canned Palmito Fruits and Vegetables .Canned Mushrooms Fruits and Vegetables .Cadmuim Content Fruits and Vegetables .Ashing Method Fruits and Vegetables .Subject Fruits and Vegetables .Canned Carrots Fruits and Vegetables .Carotene Content Fruits and Vegetables .Arsenic Fruits and Vegetables .Fresh Fruits and Vegetables .Fresh Fruits and Vegetables .Canned Tomatoes Fruits and Vegetables .Canned Green Beans and Canned Wax Beans Fruits and Vegetables .Canned Pears Fruits and Vegetables .Bilberries .Carambola .Benzoic Acid Fruits and Vegetables .Avocado Fruits and Vegetables .Canned Green Peas Fruits and Vegetables . Carrots .Fresh Fruits and Vegetables .Code of Hygienic Practice Fruits and Vegetables .Fresh Fruits and Vegetables .Jams and Jellies Fruits and Vegetables .Leek .Frozen Fruits and Vegetables .Chestnut Puree Fruits and Vegetables .French Fried Potatoes .Iron Content by Atomic Absorption Spectrometry Fruits and Vegetables .Fungus "Chanterelle" .Fresh Fruits and Vegetables .Flame Atomic Absorption Spectrometry Fruits and Vegetables .Fresh Fruits and Vegetables .Hot Peppers .Ethanol Fruits and Vegetables .Marmalade Fruits and Vegetables .Fresh Fruits and Vegetables .Subject Fruits and Vegetables .Cold Store Conditions .Frozen Fruits and Vegetables .Metallic Contaminants Fruits and Vegetables .Frozen Fruits and Vegetables .Canned Fruits and Vegetables .Lead Fruits and Vegetables .Fungi and Fungus Products Fruits and Vegetables .Dried Apricots Fruits and Vegetables .Corn-on-the Cob .Dried Edible Fungi Fruits and Vegetables .Green Bananas .Mercury Fruits and Vegetables .Green Beans and Wax Beans .Frozen Fruits and Vegetables .Nitrite and Nitrate Standard Number GS 428 : 2003 GS 386 : 2003 GS CODEX STAN 145 : GS CAC/RCP 53 : GS CAC/RCP 2 : 1969Ψ GS ISO GS ISO 2169 : 1981Ψ 7952 : 1994Ψ Page 29 27 73 67 66 148 234 30 46 69 132 155 286 214 28 69 69 56 34 74 46 74 29 57 34 251 71 213 28 32 188 71 214 20 128 213 GS 480 : 2003 GS 757 : 2003 GS CODEX STAN 39 : GS ISO GS ISO 1026 : 1982Ψ 2448 : 1998Ψ GS ISO 17240 : 2004Ψ GS ISO 6638-2 : 1984Ψ GS 405 : 2003 GS CODEX STAN 38 : GS CODEX STAN 40 : GS 926 : 2008 GS 588 : 2004 GS CODEX STAN 218 : GS 756 : 2003 GS CODEX STAN 205 : GS 433 : 2003 GS 936 : 2008 GS 604 : 2004 GS ISO 9526 : 1990Ψ GS CODEX STAN 79 : GS ISO 6633 : 1984Ψ GS 410 : 2003 GS 546 : 2004 GS CODEX STAN 160 : GS CODEX STAN 80 : GS ISO 6637 : 1984Ψ GS 305-3 : 1997 GS ISO GS ISO 762 : 2003Ψ 6635 : 1984Ψ 342 .Frozen Fruits and Vegetables .Mineral Impurities Fruits and Vegetables .Headed Cabbages .Frozen Fruits and Vegetables .Copper Content Fruits and Vegetables .Mango Fruits and Vegetables .Mango Chutney Fruits and Vegetables .Dry Matter Fruits and Vegetables .Formic Acid Fruits and Vegetables .Fresh Fruits and Vegetables .Garlic .Code of Hygienic Practice .Ginger .Fresh Fruits and Vegetables .Cauliflower .Definitions and Measurement Fruits and Vegetables .Grated Desiccated Cocoanut Fruits and Vegetables .Ginger . Fresh Fruits and Vegetables .Tomato Paste and Tomato Puree Fruits and Vegetables .Soluble Solids Fruits and Vegetables .Tin Content Fruits and Vegetables .Fresh Fruits and Vegetables .Soluble Solids Fruits and Vegetables .Fresh Fruits and Vegetables .Spinach .Watermelon .Pickled Cucumbers Fruits and Vegetables .Principles and Techniques Fruits and Vegetables .Raisins Fruits and Vegetables .Titratable Acidity Fruits and Vegetables .Tomato Concentrates Fruits and Vegetables .Sampling Fruits and Vegetables .Sweet Pepper .Sweet Potato Fruits and Vegetables .Sweet Cassava Fruits and Vegetables .Frozen Fruits and Vegetables .Unshelled Pistachio Fruits and Vegetables .Raspberries .Frozen Fruits and Vegetables .Table Olives Fruits and Vegetables .Frozen Fruits and Vegetables .PH Determination Fruits and Vegetables .Volatile Acidity Fruits and Vegetables .Water Determination Fruits and Vegetables .Total Sulphur Dioxide Fruits and Vegetables .Papaya Fruits and Vegetables .Subject Fruits and Vegetables .Peas .Wet Method Standard Number GS 905 : 2007 GS 545 : 2004 GS 461 : 2003 GS 439 : 2003 GS ISO 1842 : 1991Ψ Page 55 32 30 29 144 72 4 219 46 29 170 129 149 149 197 197 30 31 197 31 32 31 74 70 153 128 56 1 16 198 197 72 213 128 57 197 GS CODEX STAN 115 : GS 101 : 2004 GS ISO 6949 : 1988Ψ GS 758 : 2003 GS 447 : 2003 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 3659 : 1977Ψ 874 : 1980Ψ 2173 : 2003Ψ 2172 : 1983Ψ 5519 : 1978Ψ 5518 : 2007Ψ GS 465 : 2003 GS 485 : 2003 GS ISO 5521 : 1981Ψ GS 528 : 2004 GS 560 : 2004 GS 533 : 2004 GS CODEX STAN 255 : GS CODEX STAN 66 : GS ISO GS ISO 2447 : 1998Ψ 750 : 1998Ψ GS 922 : 2007 GS 8 : 1970 GS 246 : 2011 GS ISO GS ISO 5522 : 1981Ψ 5523 : 1981Ψ GS CODEX STAN 131 : GS ISO GS ISO 6632 : 1981Ψ 751 : 1998Ψ GS 933 : 2008 GS ISO 5515 : 1979Ψ 343 .Frozen Fruits and Vegetables .Table Grapes Fruits and Vegetables .Tomato .Strawberries .Pineapples Fruits and Vegetables .Ripening Fruits and Vegetables .Sorbic Acid Fruits and Vegetables .Fresh Fruits and Vegetables .Frozen Fruits and Vegetables .Okra .Total Sulphur Dioxide Fruits and Vegetables .Peaches .Spectrophotometric Method Fruits and Vegetables .Sulphur Dioxide Detection Fruits and Vegetables . Kinematic Drawings Graphical Symbols .Man-Made (Synthetic) and /or Human Hair Pieces.Valves.Metallic Materials Gas Cylinders .Kinematic Drawings Graphical Symbols .Kinematic Diagrams Graphical Symbols .Sampling Generators .Frozen Fruits and Vegetables .Industrial Application Gear Notation .Requirements Household Electrical Appliances .Design and Construction Gas Cylinders .Motor-Compressors .Valves Gas Cylinders .Consumer Panel Testing Household Electrical Appliances .Valves Gas Cylinders .Cooking Ranges Household Electrical Appliances . Hair Extensions Household Electrical Appliances .Periodic Inspection and Testing Gas Cylinders .Symbols for Geometrical Data General Guidelines .Dishwashers Household Electrical Appliances .Whole Kernel Corn .Metallic Materials Gas Cylinders .Subject Fruits and Vegetables .Electric Irons Standard Number GS 468 : 2003 GS ISO GS ISO Page 30 213 213 262 268 291 192 264 264 264 261 154 276 263 256 264 271 278 241 128 67 204 98 99 247 175 175 175 131 225 62 93 112 94 95 93 6636-3 : 1983Ψ 6636-1 : 1986Ψ GS ISO 10691 : 2004Ψ GS ISO 11755 : 2005Ψ GS ISO 22991 : 2004Ψ GS ISO 4978 : 1983Ψ GS ISO 11116-2 : GS ISO 11114-1 : GS ISO 11114-2 : GS ISO 10464 : 2004Ψ GS ISO 2503 : 1998Ψ GS ISO 13769 : 2007Ψ GS ISO 10920 : 1997Ψ GS ISO 10297 : 2006Ψ GS ISO 11116-1 : GS ISO 13341 : 1997Ψ GS ISO 14245 : 2006Ψ GS ISO GS ISO 8573-3 : 1999Ψ 701 : 1998Ψ GS CAC/GL 50 : 2004Ψ GS ISO 6070 : 1981Ψ GS IEC 60672-1 : GS IEC 60672-3 : GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 8999 : 2001Ψ 3952-4 : 1984Ψ 3952-3 : 1979Ψ 3952-2 : 1981Ψ 952-4 : 1984Ψ 7287 : 2002Ψ GS 989 : 2010 GS IEC 60335-2-34 : GS IEC TR 61592 : 2003Ψ GS IEC 60335-2-6 : GS IEC 60335-2-58 : GS IEC 60311 : 2002Ψ 344 .Compressed and Liquified Gases Gas Cylinders .Valve Connection Gas Cylinders .Non. Wigs.Self Closing Gases .Valve Specification and Testing Gas Cylinders .Internal Combustion Engines Graphical Symbols .Zinc Fruits and Vegetables .Checking Procedures Gas Cylinders .Gauge Gas Cylinders .Kinematic Drawings Graphical Symbols .Thermal Cutting Equipment Hair Replacements .Pressure Regulators Gas Cylinders — Stamp Marking Gas Cylinders .Vibration .Zinc Gas Cylinders .Individual Materials Graphical Symbols .Auxilliary Tables Glass and Ceramic Insulating Materials .Flat Rolled Steel Gas Cylinders .Definitions Glass and Ceramic Insulating Materials . Process Assessment .Electric Irons Household Electrical Appliances .Fans Household Electrical Appliances .Security Techniques .Process Assessment .Overview and Vocabulary GS ISO IEC 27002 : GS ISO IEC 27000 : 345 .Process Assessment .Refrigerating .Filter Elements Industrial Chemicals .Kitchen Machines Household Electrical Appliances .Washing Machines Household Electrical Appliances .Grills.Guidance on Process Improvement and Process GS ISO IEC 15504-4 : Information Technology .Code of Practice for Information Security Information Technology .Measuring Performance Household Electrical Appliances .Terminological Information Technology .Refrigerating . Ice-Cream and Ice-Makers .Ethanol for Industrial Use Industrial Chemicals .Ironing Machines Household Electrical Appliances .Turbidimetric Method Industrial Chemicals .Computer Applications .Sulphuric Acid and Oleum Industrial Chemicals .Process Assessment .Software Engineering .Water Heaters Household Electrical Appliances .Soluble Sulphates .Process Assessment .Guidance on Performing an Assessment Standard Number GS IEC 60335-2-3 : GS IEC 60335-2-80 : GS IEC 60335-1 : GS IEC 60335-2-9 : GS IEC 60508 : 1975Ψ GS IEC 60335-2-14 : GS IEC 61923 : 1997Ψ GS IEC 60335-2-25 : GS IEC 60335-2-78 : GS IEC 60335-2-34 : GS IEC 62552 : 2007Ψ GS IEC 60335-2-24 : GS IEC 60442 : 2003Ψ GS IEC 60335-2-12 : GS IEC 60456 : 2003Ψ GS IEC 60335-2-7 : GS IEC 60335-2-35 : GS IEC 60335-2-21 : GS ISO 2942 : 2004Ψ Page 94 95 93 94 98 94 109 94 95 95 111 94 97 93 97 93 94 94 160 21 130 137 155 166 130 196 246 299 285 299 295 295 295 295 298 298 GS 315 : 2003 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 904 : 1976Ψ 1342 : 2000Ψ 2762 : 1973Ψ 3423 : 1975Ψ 910 : 1977Ψ 5414-1 : 2002Ψ 8790 : 1987Ψ GS ISO IEC TR 25021 : GS ISO 16642 : 2003Ψ GS ISO IEC TR 15504-6 GS ISO IEC 15504-1 : GS ISO IEC 15504-5 : GS ISO IEC 15504-3 : Information Technology .Computer Systems Information Technologgy .Hydrochloric Acid Industrial Chemicals .Washing Machines Household Electrical Appliances . Toasters Household Electrical Appliances .Subject Household Electrical Appliances .Safety Household Electrical Appliances .Test Methods Household Electrical Appliances .Tool Chucks Information Processing Systems .Oil of Rosemary Industrial Chemicals .Particular Requirements for Motor-Compressors Household Electrical Appliances .Software Product Quality Requirements and Information Technology .Warming Plates Household Electrical Appliances .An Exemplar system Life Cycle Process Information Technology .Outdoor Barbecues Household Electrical Appliances .Exemplar Process Assessment Model Information Technology .General Requirements Household Electrical Appliances .Water Heaters Hydraulic Fluid Power .Security Techniques .Sulphuric Acids Industrial Equipments .Microwave Ovens Household Electrical Appliances .Toasters Household Electrical Appliances .Concepts and Vocabulary Information Technology . Security Techniques .Software Engineering .Software and System Engineering .Sodium Chloride Insecticides .Planning and Information Technology .Measurement GS ISO IEC 25020 : Information Technology .Systems and Software Engineering .Documentation Information Technology .Software Engineering .Security Techniques .Vocabulary .Vocabulary .Citrus Planting Material Inspection Manual .Software Product Evaluation .Audit and Certification Information Technology .Software Engineering .Process for Acquirers Standard Number GS ISO IEC 27001 : GS ISO IEC 27006 : GS ISO IEC 27005 : GS ISO IEC 27011 : GS ISO IEC 20000-2 : GS ISO IEC 20000-1 : GS ISO IEC 18019 : GS ISO IEC 90003 : GS ISO IEC 14598-6 : GS ISO IEC 14598-2 : GS ISO IEC 14598-4 : Page 298 299 299 299 297 297 297 299 296 295 295 295 297 297 298 298 298 297 295 297 297 295 296 298 296 295 294 294 294 294 294 294 35 7 112 113 Information Technology .Process Evaluators GS ISO IEC 14598-1 : GS ISO IEC 14598-5 : Information Technology .Software Engineering .Life Cycle Processes GS ISO IEC 15910 : GS ISO IEC 12207 : GS ISO IEC 15288 : Information Technology .Guidelines for Application to Computer Information Technology .Dried Cowpea Grains GS ISO IEC 15289 : GS ISO IEC 2383-7 : GS ISO IEC 2382-17 : GS ISO IEC 2382-4 : GS ISO IEC 2382-15 : GS ISO IEC 2382-5 : GS ISO IEC 2382-8 : GS ISO IEC 2382-29 : GS 632 : 2003 GS 147 : 2007 GS IM 9 : 2009 GS IM 13 : 2011 346 .Vocabulary .Speech Recognition and Synthesis Inorganic Chemicals .Services Management Information Technology .Programming Languages Information Technology .Mosquito Coil Inspection Manual .Systems and Software Engineering .Systems and Software Life Cycle Process Information Technology .Product Evaluation .Software Product Quality Requirements and Evaluation .Product Evaluation .Software Engineering .User Documentation for Information Technology .Databases Information Technology .Risk Management Information Technology .Vocabulary .Product Evaluation .Organization of Data Information Technology .Software Engineering .Requirements for Designers and GS ISO IEC 26514 : Information Technology .Vocabulary .Product Evaluation .Vocabulary .Code of Practice Information Technology .Representation of Data Information Technology .Software Product Quality Requirements and GS ISO IEC 25051 : Information Technology .Software Engineering .Requirements Information Technology .Software Product Evaluation .Product Quality Requirements and Evaluation Information Technology .Security Techniques .Security Techniques .Systems and Software Engineering .Software Product Quality Requirements and GS ISO IEC 25062 : Information Technology .Process for Developers GS ISO IEC 14598-3 : Information Technology .Vocabulary .Subject Information Technology .General Overview Information Technology .Service Management .Software Engineering .Life Cycle Processes Information Technology .Requirements .Product Quality Requirements and Evaluation GS ISO IEC 25000 : GS ISO IEC 25001 : Information Technology .Security Information Technology .Software User Documentation Process Information Technology .Software Engineering .Computer Programming Information Technology .Instructions .Telecommunications Information Technology .Software Engineering .Software Product Quality Requirements and GS ISO IEC 25030 : Information Technology . Glass Insulators Insulators .Instructions .Code .Gems and Jewellery Industries Jewellery .Pineapple Planting Material Insulators .Lime Posts Insulators .Overhead Lines Insulators .Terminology and Classification Jewellery .Overhead Lines Insulators .Insulation Co-ordination Insulators .Gold Solders Jewellery .Fresh Garden Eggs Inspection Manual .Precious Metal Alloys Jewellery .High Voltage Insulators .Gold Alloy Coatings Jewellery .String Units Insulators .High Voltage Insulators .Subject Inspection Manual .Colours of Gold Alloys Jewellery .Fineness and Marking Jewellery .Requirements .Primary Nickel Jewellery .Overhead Lines Insulators .Gold.Instructions .High Voltage Insulators .Post Insulators Insulators .Cupellation Method Jewellery .Mango Planting Material Inspection Manual .Metallurgical Materials Standard Number GS IM 15 : 2011 GS IM 14 : 2011 GS IM 12 : 2009 GS IM 10 : 2009 GS IM 11 : 2009 GS IEC 61211 : 2004Ψ GS IEC 61462 : 1998Ψ GS IEC 62155 : 2003Ψ GS IEC 60437 : 1997Ψ GS IEC 60507 : 1991Ψ GS IEC 61245 : 1993Ψ GS IEC 60071-1 : GS IEC 60720 : 1981Ψ GS IEC 60383-1 : GS IEC 60305 : 1995Ψ GS IEC 60433 : 1998Ψ GS IEC 60383-2 : GS IEC 60815 : 1986Ψ GS IEC 60660 : 1999Ψ GS IEC 60168 : 2001Ψ GS IEC 60273 : 1990Ψ GS IEC 60797 : 1984Ψ GS IEC 60120 : 1984Ψ GS 901 : 2008 GS ISO 8654 : 1987Ψ Page 113 113 113 112 113 107 108 111 96 97 108 88 100 96 92 96 96 103 98 90 92 100 89 54 242 54 53 53 262 54 54 54 300 249 54 54 GS 902 : 2007 GS 889 : 2007 GS 890 : 2007 GS ISO 10713 : 1992Ψ GS 893 : 2007 GS 891 : 2007 GS 892 : 2007 GS ISO TR 11211 : 1995 GS ISO 9202 : 1991Ψ GS 903 : 2007 GS 900 : 2007 347 .Fresh Aubergines Inspection Manual .Instructions .Post Insulators Insulators .Ceramic Mateials Insulators .String Units Jewellery .Fine Grade Palladium Jewellery .Overhead Lines Insulators .Fineness and Marking Jewellery .Post Insulators Insulators .Moringa Leaf Products Inspection Manual .Polished Diamonds .Guidelines for Manufacture Jewellery .Composite and Hollow Insulators .Polluted Condiitions Insulators . General Tolerances for Features Measurements .Occupational Health and Safety .Fluorescent Lamps Lighting Systems .General tolerances for linear and angular Measurements .Silver .Zinc Ingot Keys and Keyways Keys and Keyways .Incandescent Lamps Machine Tools .Definitions Measurements and Designation Jewellery .Preferred Numbers Measurements .Height Characterization Measurements .Acoustics Measurements .Vapour Vacuum Pumps Measurements .Motif Parameters Measurements .Vibrations Standard Number GS ISO 8653 : 1986Ψ Page 241 56 55 163 174 12 165 22 21 112 127 293 132 230 114 322 154 156 156 193 113 273 323 122 269 122 114 144 132 182 136 133 141 141 141 220 GS 916 : 2007 GS 904 : 2007 GS ISO GS ISO 3117 : 1977Ψ 3912 : 1977Ψ GS 209 : 2007 GS ISO 3266 : 1984Ψ GS 324 : 2003 GS 323 : 2003 GS IEC TR 60887 : 2003Ψ GS ISO 702-1 : 2001Ψ GS ISO 26000 : 2010Ψ GS 1014 : 2011 GS ISO GS ISO GS OIML R GS ISO GS ISO GS ISO GS ISO GS ISO 7583 : 1986Ψ 16 : 1975Ψ 44 : 2538 : 1998Ψ 2768-2 : 1989Ψ 2768-1 : 1989Ψ 5458 : 1998Ψ 1 : 2002Ψ GS ISO 13565-2 : GS OIML R GS ISO 52 : 286-2 : 1988Ψ GS ISO 12085 : 1996Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 497 : 1973Ψ 17 : 1973Ψ 1829 : 1975Ψ 1000 : 1992Ψ 4288 : 1996Ψ 1302 : 2002Ψ 1101 : 2004Ψ 1607-1 : 1993Ψ 1608-2 : 1989Ψ 1608-1 : 1993Ψ 6954 : 2000Ψ 348 . Location and Run-out Measurements .Ballasted Lamps Lighting Systems .Subject Jewellery .Techncial Product Documentation Measurements .Limits and Fits Measurements .Wooddruff Keys Laundry Products .Requirements Manufacturing Engineering (Vocabularies) Measurements .Geometric Tolerancing Measurements .Hexagonal Weights Measurements .Surface Texture Measurements .Angles and Slopes Measurements .Selection of Tolerance Zones Measurements .Alcoholmeters and Alcohol Hydrometers Measurements .Preferred Numbers Measurements .Vacuum Pumps Measurements .Vapour Vacuum Pumps Measurements .Geometrical Product Specification and Verification Measurements .Tolerances of Form.Ring Sizes . Orientation.Volumetric Method Jewellery .Washing Blue LifitngEquipments .SI Units Measurements .Connecting of Spindle noses Management .Social Responsibility Management Systems .Eyebolts Lighting Systems . Term "HALAL" Meat and Meat Products .Detection of Colouring Agents Meat and Meat Products .Fresh.Metallic Contaminants Meat and Meat Products .Weighing Instruments Meat and Meat Products . Chilled and Frozen Mutton Meat and Meat Products .Subject Measurements .Starch Content Meat and Meat Products .Chloride Content Meat and Meat Products .Determination of Chloramphenicol Content Meat and Meat Products . Chilled and Frozen Poultry Meat and Meat Products .Determination of Starch and Glucose Content Meat and Meat Products .Dressed.Sampling Meat and Meat Products .Total Ash Meat and Meat Products . Chilled and Frozen Beef Meat and Meat Products .Total Fat Content Standard Number GS 85 : 2005 Page 2 7 323 144 144 21 17 14 19 272 272 272 276 2 138 68 2 3 3 179 166 3 159 20 2 137 162 159 131 3 2 3 198 67 131 137 GS 151 : 2005 GS OIML R GS ISO GS ISO 76-1 : 1841-1 : 1996Ψ 1841-2 : 1996Ψ GS 311 : 2003 GS 274 : 2010 GS 224 : 2003 GS 288 : 2003 GS ISO 13496 : 2000Ψ GS ISO 13493 : 1998Ψ GS ISO 13965 : 1998Ψ GS ISO 13730 : 1996Ψ GS 91 : 2003 1444 : 1996Ψ GS ISO GS CAC/RCP 58 : GS GS GS 68 : 1990 90 : 2003 92 : 2005 4134 : 1999Ψ 3496 : 1994Ψ GS ISO GS ISO GS 94 : 2011 2917 : 1999Ψ GS ISO GS 305-2 : 1997 GS 70 : 1990 (2005) 1442 : 1997Ψ 3091 : 1975Ψ 2918 : 1975Ψ 937 : 1978Ψ GS ISO GS ISO GS ISO GS ISO GS GS GS 89 : 2008 67 : 1990 93 : 2008 5554 : 1978Ψ GS ISO GS CAC/GL 24 : 1997Ψ GS ISO GS ISO 936 : 1998Ψ 1443 : 1973Ψ 349 .Hydroxyproline Content Meat and Meat Products .Fresh Meat Meat and Meat Products .Nitrate Content Meat and Meat Products .Chopped Meat Meat and Meat Products .Free Fat Content Meat and Meat Products .Volume Measurements .Fresh Meat Meat and Meat Products .Moisture Content Meat and Meat Products .Methods for Chemical Analysis Meat and Meat Products .Nitrite Content Meat and Meat Products .Salmonellae Detection Meat and Meat Products .Weighing Instruments Measurements .Pork Meat and Meat Products .Nitrogen Content Meat and Meat Products .Cured Pork Shoulder Meat and Meat Products .Corned Beef Meat and Meat Products .Glutamic Acid Content Meat and Meat Products .Cured Ham Meat and Meat Products .Chloride Content Meat and Meat Products .Measurement of pH Meat and Meat Products .Determination of Total Phosphorus Content Meat and Meat Products .Luncheon Meat Meat and Meat Products .Fresh. Belt Drives Mechancial Engineering .HexagonFlange Bolts.Hexagon Socket Set Screws-Cone Point Mechancial Engineering .Vibration .Subject Meat and Meat Products .Plain Bearings-Lead and Tin Casting Alloy Mechancial Engineering .Hexagon Nuts-Style 2.Grade C Mechancial Engineering .Bearings .Hexagon Socket Set Screws-Cup Point Mechancial Engineering .Aluminium and Aluminium Alloys Mechanical Engineering .Coarse Thread Mechancial Engineering .Slotted Countersunk Flat Head Screws Mechanical Engineering .Aluminium and Alloys Mechanical Engineering .Aluminium and Alloys Mechanical Engineering .Hexagon Nuts-Style 1.Vibration Mechancial Engineering .Plain Bearings Mechancial Engineering .Flange.Hexagon Thin Nuts.Chemical Composition Mechanical Engineering .Balancing Mechancial Engineering .Total Phosphorous Content Mecahnical Engineering .Balancing Machines Mechanical Engineering .Grade A and B Mechancial Engineering .Plain Bearings Mechancial Engineering .small Series Mechancial Engineering .Slotted Countersunk Flat Head Screws Mechanical Engineering .Thermoplastic Polymers Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 2294 : 1974Ψ 1925 : 2001Ψ 5288 : 2001Ψ 4035 : 1999Ψ 4036 : 1999Ψ 4161 : 1999Ψ 4034 : 1999Ψ 4032 : 1999Ψ 4033 : 1999Ψ 4027 : 2003Ψ 4029 : 2003Ψ 4028 : 2003Ψ 4026 : 2003Ψ 4162 : 1990Ψ 3548 : 1999Ψ Page 151 145 194 178 178 180 178 178 178 178 178 177 177 181 168 183 209 209 182 124 210 206 160 155 146 146 148 148 147 167 119 160 246 228 222 215 4384-1 : 2000Ψ 6524 : 1992Ψ 6526 : 1983Ψ 4381 : 2000Ψ 582 : 1995Ψ 6553 : 1980Ψ 6303 : 1981Ψ 2953 : 1999Ψ 2631-2 : 2003Ψ 2010 : 1994Ψ 2009 : 1994Ψ 2143 : 1981Ψ 2135 : 1984Ψ 2085 : 1976Ψ 3522 : 2007Ψ 209 : 2007Ψ 2931 : 1983Ψ 8821 : 1989Ψ 7475 : 2002Ψ 7148-1 : 1999Ψ 6691 : 2000Ψ 350 .Steam Traps Mechancial Engineering .Grade B Mechancial Engineering .Plain Mechanical Engineering .Hexagon Socket Set Screws-Dog Point Mechancial Engineering .Hexagon Thin Nuts.Grade A and B Mechancial Engineering .Rolling Bearings Mechancial Engineering .Hexagon Socket Set Screws-Flat Point Mechancial Engineering .Bearings .Grade A and B Mechancial Engineering .Hexagon Nuts.Plain Bearings Mechancial Engineering .Anodizing of Aluminium and Alloys Mechanical Engineering .Virbaration and Shock Mechanical Engineering .Aluminium and Alloys Mechanical Engineering .Balancing Mechanical Engineering .Steels Mechancial Engineering .Hexagon Nuts.Plain Bearings Mechancial Engineering .Aluminium and Aluminium Alloys . Belt Drives Mechanical Engineering .Drilling Machines Mechanical Engineering .Cylindrical Gears Mechanical Engineering .Belt Drives Mechanical Engineering .Belt Drives .Belt Drives Mechanical Engineering .Subject Mechanical Engineering .Compressors Mechanical Engineering .Clevis Pins Mechanical Engineering .Belt Drives Mechanical Engineering .Belt Drives Mechanical Engineering .Belt Drives Mechanical Engineering .Combustion Engines Mechanical Engineering .Cylindrical Gears .Combustion Engines Mechanical Engineering .Bevel Gears Mechanical Engineering .Pulleys for V-belts Mechanical Engineering .Belts Mechanical Engineering .Belt Drives .Drilling Machines .Belt Drives Mechanical Engineering .Belt Drives .Belt Drives Mechanical Engineering .Combustion Engines Mechanical Engineering .Combustion Engines Mechanical Engineering .Belt Drives Mechanical Engineering .Box Type Vertical Drilling Machines Mechanical Engineering .Belt Drives Mechanical Engineering .Pulleys Mechanical Engineering .Bevel Gears Mechanical Engineering .Belt Drives Mechanical Engineering .Covered Electrodes Mechanical Engineering .Belt Drives .Grooved Pulleys Mechanical Engineering .Length in Datum Mechanical Engineering .Testing of the Accuracy Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 9608 : 1994Ψ 1604 : 1989Ψ 22 : 1991Ψ 9980 : 1990Ψ 8419 : 2003Ψ 9981 : 1998Ψ 1081 : 1995Ψ 5291 : 1993Ψ 5292 : 1995Ψ 529 : 2001Ψ 1813 : 1998Ψ 9563 : 1990Ψ 4183 : 1995Ψ 4184 : 1992Ψ 254 : 1998Ψ 155 : 1998Ψ 255 : 1990Ψ Page 252 141 115 254 238 254 133 194 194 123 143 251 181 181 119 118 120 194 126 126 151 166 152 152 213 213 264 212 212 135 152 136 136 164 153 156 5296-2 : 1989Ψ 678 : 1976Ψ 677 : 1976Ψ 2772-1 : 1973Ψ 3419 : 1981Ψ 2341 : 1986Ψ 2340 : 1986Ψ 6621-5 : 2005Ψ 6621-4 : 2003Ψ GS ISO 11055 : 1996Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 6621-3 : 2000Ψ 6621-2 : 2003Ψ 1217 : 1996Ψ 2401 : 1972Ψ 1328-1 : 1995Ψ 1340 : 1976Ψ 3190 : 1975Ψ 2423 : 1982Ψ 2772-2 : 1974Ψ 351 .Clevis Pins Mechanical Engineering .Combustion Engines Mechanical Engineering .Drilling Machines Mechanical Engineering .Belt Drives Mechanical Engineering .Belt Drives .Butt-welding Fittings Mechanical Engineering .Information Mechanical Engineering .Pulleys Mechanical Engineering . Gate Valves Mechanical Engineering .Hydrulic Power Generating and Pumping Plants Mechanical Engineering .Subject Mechanical Engineering .Head Screws Mechanical Engineering .Hydraulic Fluid Power .Grade C Mechanical Engineering .Industrial Automation Systems Mechanical Engineering .Fittings Mechanical Engineering .Hexagon Head Bolts-Grade A and B Mechanical Engineering .Hexagon Head Bolts.Heavy-duty Cranked-link Mechanical Engineering .Electrodeposited Coatings Mechanical Engineering .Gas Welding Equipment Mechanical Engineering .Electronic Components Mechanical Engineering .Gears Mechanical Engineering .Fasteners Mechanical Engineering .Industrial Automation Systems Standard Number GS ISO 10656 : 1996Ψ GS ISO 1458 : 2002Ψ Page 262 138 96 147 157 165 205 119 120 204 178 257 190 167 139 138 278 203 278 134 207 135 138 152 167 176 176 176 177 177 267 262 234 257 256 257 GS IEC 60410 : 1973Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 2093 : 1986Ψ 2858 : 1975Ψ 3269 : 2000Ψ 6157-3 : 1988Ψ 225 : 1983Ψ 273 : 1979Ψ 6157-1 : 1988Ψ 4042 : 1999Ψ GS ISO 10386 : 1994Ψ GS ISO GS ISO GS ISO GS ISO 4885 : 1996Ψ 3545-3 : 1989Ψ 1482 : 1983Ψ 1460 : 1992Ψ GS ISO 14112 : 1996Ψ GS ISO 5996 : 1984Ψ GS ISO 14104 : 1995Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 1122-1 : 1998Ψ 6336-5 : 2003Ψ 1207 : 1992Ψ 1481 : 1983Ψ 2342 : 2003Ψ 3512 : 1992Ψ 4016 : 1999Ψ 4014 : 1999Ψ 4015 : 1979Ψ 4018 : 1999Ψ 4017 : 1999Ψ GS ISO 11170 : 2003Ψ GS ISO 10767-1 : GS ISO 7919-5 : 1997Ψ GS ISO 10303-42 : 2003Ψ GS ISO 10303-21 : 2002Ψ GS ISO 10303-203 : 352 .Galvanized Coatings Mechanical Engineering .Gears Mechanical Engineering .Head Tapping Screws Mechanical Engineering .Reduced Shank Mechanical Engineering .Hexagon Head Screws-Grade A and B Mechanical Engineering .Fasteners-Electroplated Coatings Mechanical Engineering .Pumps Mechanical Engineering .Headless Screws Mechanical Engineering .Electric Resistance Welding Mechanical Engineering .Flat Head Tapping Screws Mechanical Engineering .Electroplated Coatings of Tin Mechanical Engineering .Hexagon Head Screws Mechanical Engineering .Ferrous Products Mechanical Engineering .Industrial Automation Systems Mechanical Engineering .Fasteners Mechanical Engineering .Filter Mechanical Engineering .Hexagon Head Bolts-Grade b.Gears Mechanical Engineering .Fasteners Mechanical Engineering .End-suction Centrifugal Pumps Mechanical Engineering .Ferroboron Mechanical Engineering .Fasteners Mechanical Engineering .Hydraulic Fluid Power .Fasteners Mechanical Engineering . Plain Bearings-Copper Alloy Bushes Mechanical Engineering . Definitions and Classifications Mechanical Engineering .Pulleys Mechanical Engineering .Plain Bearings Mechanical Engineering .Plain Bearings Mechanical Engineering .Oval Head Tapping Screws Mechanical Engineering .Metric Screw Threads Mechanical Engineering .Precision Roller Mechanical Engineering .Industrial Automation Systems and Integration Mechanical Engineering .Plain Bearings Mechanical Engineering .Leaf Chains Mechanical Engineering .Metallic Coatings Mechanical Engineering .Subject Mechanical Engineering .Plain Bearings Mechanical Engineering .Plain Bearings Mechanical Engineering .Roller Chain Drives Mechanical Engineering .Radial Bearings Mechanical Engineering .Rolling Bearings Standard Number Page 257 257 162 182 146 119 138 138 120 120 139 162 139 151 119 262 206 206 156 233 209 183 233 233 182 183 182 124 194 162 122 114 161 263 135 161 GS ISO 10303-43 : 2000Ψ GS ISO 10303-44 : 2000Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 3089 : 2005Ψ 4347 : 2004Ψ 1985 : 1998Ψ 230-2 : 1997Ψ 1463 : 2003Ψ 1456 : 2003Ψ 261 : 1998Ψ 262 : 1998Ψ 1502 : 1996Ψ 3096 : 1996Ψ 1483 : 1983Ψ 2338 : 1997Ψ 228-1 : 2000Ψ GS ISO 10804-1 : GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 6282 : 1983Ψ 6280 : 1981Ψ 2795 : 1991Ψ 7905-4 : 1995Ψ 6525 : 1983Ψ 2 4386-1 : 1992Ψ 7905-2 : 1995Ψ 7905-3 : 1995Ψ 4379 : 1993Ψ 4383 : 2000Ψ 4378-1: 1997Ψ 606 : 2004Ψ 5294 : 1989Ψ 3069 : 2000Ψ 492 : 2002Ψ 15 : 1998Ψ 3030 : 1996Ψ GS ISO 10823 : 2004Ψ GS ISO GS ISO 1206 : 2001Ψ 2982-2 : 2001Ψ 353 .Plain Bearings Mechanical Engineering .Metric Screw Threads Mechanical Engineering .Industrial Automation Systems and Integration Mechanical Engineering .Pipe Threads Mechanical Engineering .Plain Bearings-Terms.Pipelines Mechanical Engineering .Needle Rollers Mechanical Engineering .Jaws Mechanical Engineering .Rolling Bearings Mechanical Engineering .Plain Bearings-Materials-Thin Walled Mechanical Engineering .Machine Tools Mechanical Engineering .Parallel Pins Mechanical Engineering .Roller Bearings Mechanical Engineering .Machine Tools Mechanical Engineering .Metallic and Oxide Coatings Mechanical Engineering .Metric Screw Threads Mechanical Engineering .Radial Bearings Mechanical Engineering .Plain Bearings Mechanical Engineering .Plain Bearings Mechanical Engineering .Pumps Mechanical Engineering . Screws Mechanical Engineering .Pipie Threads Mechanical Engineering .Hexagon Socket Button Head Mechanical Engineering .Shafts Mechanical Engineering .Splines for Cylindrical Shafts Mechanical Engineering .Seals .Slotted Pan Head Screws Mechanical Engineering .Plumber Block Housings Mechanical Engineering .Spherical plain bearings Mechanical Engineering .Screw Threads.Seals .Steel Roller Chains Mechanical Engineering .Steel Wires Mechanical Engineering .Rolling Bearings Mechanical Engineering .Rolling Bearings .Screw Threads.Subject Mechanical Engineering .Metric Fine Pitch Mechanical Engineering .Screws Mechanical Engineering .Radial Bearings Mechanical Engineering .Screws Mechanical Engineering .Split Pins Mechanical Engineering .Screws .Rolling Bearings .Hexagon Head .Screws Mechanical Engineering .Screws Mechanical Engineering .Spot Welding .Corks Mechanical Engineering .Screws .Shaft Heights Mechanical Engineering .Dimensions Mechanical Engineering .Rolling Bearings Mechanical Engineering .Terms and Definitions Mechanical Engineering .Screws Mechanical Engineering .Rolling Bearings .Round Drawn Wire Mechanical Engineering .Rolling Bearings .Steel Tapping Screws Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 3228 : 1993Ψ Page 164 134 239 117 121 134 161 145 149 114 114 222 228 231 195 221 222 222 228 227 242 227 189 205 122 190 140 217 114 136 133 210 210 163 122 155 1132-2 : 2001Ψ 8443 : 1999Ψ 113 : 1999Ψ 464 : 1995Ψ 1132-1 : 2000Ψ 3031 : 2000Ψ 1940-1 : 2003Ψ 2232 : 1990Ψ 7-1 : 1994Ψ 7-2 : 2000Ψ 7046-2 : 1990Ψ 7434 : 1983Ψ 7721-2 : 1990Ψ 5408 : 1983Ψ 7045 : 1994Ψ 7049 : 1983Ψ 7050 : 1983Ψ 7436 : 1983Ψ 7379 : 1983Ψ 8676 : 1999Ψ 7380 : 2004Ψ 4708 : 2000Ψ 6194-3 : 1988Ψ 496 : 1973Ψ 4863 : 1984Ψ 1580 : 1994Ψ 6811 : 1998Ψ 14 : 1982Ψ 1234 : 1997Ψ 1089 : 1980Ψ 6554 : 1980Ψ 6552 : 1980Ψ 3108 : 1974Ψ 487 : 1998Ψ 2702 : 1992Ψ 354 .Steam Traps Mechanical Engineering .Screws Mechanical Engineering .Rotors Mechanical Engineering .Shaft-Lip Mechanical Engineering .Screws Mechanical Engineering .Pipe Threads Mechanical Engineering .Rolling Bearings Mechanical Engineering .Thrust Needle Roller Mechanical Engineering .Steam Traps Mechanical Engineering .Screws Mechanical Engineering . Susceptibility and Sensitivity of Machines Mechanical Engineering .Welds in Steel Mechanical Engineering .General Tolerances Mechanical Engineering .Vibration and Shock Mechanical Engineering .Unalloyed Aluminium Ingots Mechanical Engineering .Metric Screw -Tolerances .Welding Consumables Mechanical Engineering .Trapezoidal Screw Threads Mechanical Engineering .Steel Wire-Elevator Ropes Mechanical Engineering .Fibre Main Cores Mechanical Engineering .Thrust Bearings Tolerances Mechanical engineering .Synchronous Belt Drives Mechanical Engineering .Wrought Aluminium and Alloy Sheets Mechanical Engineering .Taper Pins Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO 2408 : 2004Ψ 4345 : 1988Ψ 4346 : 1977Ψ 4101 : 1983Ψ 1341 : 1976Ψ Page 153 182 182 179 137 263 194 194 151 132 115 118 151 158 159 159 159 117 141 201 155 155 126 277 276 277 155 133 152 207 207 207 207 62 62 228 GS ISO 10814 : 1996Ψ GS ISO GS ISO GS ISO 5296-1 : 1989Ψ 5295 : 1987Ψ 2339 : 1986Ψ 965-3 : 1998Ψ 104 : 2002Ψ 199 : 2005Ψ 2320 : 2008Ψ 2902 : 1977Ψ 2901 : 1993Ψ 2903 : 1993Ψ 2904 : 1977Ψ 115 : 2003Ψ 1609 : 1986Ψ 5752 : 1982Ψ 2631-1 : 1997Ψ 2553 : 1992Ψ 669 : 2000Ψ Mechanical Engineering .Welded.Guidance on Measurement Mechanical Engineering .Production of Moringa Leaf Products Metallurgy .Straight Bevel Gears .Thrust Bearings Mechanical Engineering .Welding .Steel Wire Ropes. Brazed and Soldered Joints Mechanical Engineering .Steel Mechanical Engineering .Trapezoidal Screw Threads Mechanical Engineering .Welding Mechanical Engineering .Steel Wire Ropes Mechanical Engineering .Subject Mechanical Engineering .Synchronous Belts Mechanical Engineering .Valves Mechanical Engineering .Constructional Screw Threads GS ISO Mechanical Engineering .Information Mechanical Engineering .Wrought Aluminium and Alloy Sheets Medicinal Plants .Wrought Aluminium and Alloy Sheets Mechanical Engineering .Welding .Welding .Vacuum Technology Mechanical Engineering .Moringa leaf products Medicinal Plants .Bend Test GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 13920 : 1996Ψ GS ISO 13916 : 1996Ψ GS ISO 13919-1 : GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 2560 : 2002Ψ 1071 : 2003Ψ 2400 : 1972Ψ 6361-1 : 1986Ψ 6361-2 : 1990Ψ 6361-3 : 1985Ψ 6361-4 : 1988Ψ GS 998 : 2009 GS 999 : 2009 GS ISO 7438 : 2005Ψ 355 .Steel Wire Rpoes-Lubricants Basic Mechanical Engineering .Torque type steel nuts Mechanical Engineering .Trapezoidal Screw Threads Mechanical Engineering .Trapezoidal Screw Threads Mechanical Engineering .Wrought Aluminium and Alloy Sheets Mechanical Engineering .Welding Consumables Mechanical Engineering .Threads . Detection of Vibrio Paraheamolytius Microbiology .Carcass Sampling Microbiology .X .Metallic Coatings Metallurgy .Metallic Coatngs .Food and Animal Feeding Stuffs Microbiology .Butter Milk and Milk Products .Subject Metallurgy .Food and Animal Feeding Stuffs Microbiology .Cheddar Milk and Milk Products .Food Animal Feeding Stuffs Microbiology .Initial Suspension and Decimal Dilutions Milk and Milk Products .Butter Milk and Milk Products .Casein Products Milk and Milk Products .Acidity Determination Milk and Milk Products . Milk and Milk Products .Inorganic Coatings Metallurgy .Camembert.Metallic Coatings .Detection of Yeast and Moulds Microbiology .Measurement of Thicknes Metallurgy .Food Microbiology Coliforms Microbiology .Cheese Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 2531 : 1998Ψ 6988 : 1985Ψ 2064 : 1996Ψ 3497 : 2000Ψ 2063 : 2005Ψ Page 154 220 147 166 147 209 209 124 220 230 138 246 234 218 211 217 218 234 224 286 218 190 225 189 217 204 204 26 172 23 224 269 25 18 24 26 6508-1 : 2003Ψ 6508-2 : 2005Ψ 643 : 2003Ψ 6892 : 1998Ψ 7531 : 1987Ψ 1461 : 2009Ψ 8914 : 1990Ψ 7954 : 1987Ψ 6887-4 : 2003Ψ 6579 : 2002Ψ 6887-2 : 2003Ψ 6888-1 : 1999Ψ 7932 : 2004Ψ 7218 : 2007Ψ GS ISO 17604 : 2003Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 6887-3 : 2003Ψ 4833 : 2003Ψ 7251 : 2005Ψ 4831 : 2006Ψ 6887-1 : 1999Ψ 6092 : 1980Ψ 6091 : 1980Ψ GS 354 : 2003 GS ISO 3727-3 : 2003Ψ GS 340 : 2003 GS ISO 7238 : 2004Ψ GS ISO 12081 : 1998Ψ GS 353 : 2003 GS 278 : 2003 GS 341 : 2003 GS 359 : 2003 356 .Fabricated Iron and Steel Articles Microbiology .Food and Animal Feeding Stuffs Microbiology .Wire Ropes Metallurgy -Metallic Coatings .Verification and Calibration of Testing Machines Metallurgy .Steel Testing Metallurgy .Ray Spectrometric Methods Metallurgy .Definations and Conventions .Butter Milk and Milk Products .Tensile Testing Metallurgy .Food Microbiology Microbiology .Food and Animal Feeding Stuffs Microbiology .Metallic Coatings .Food Microbiology Microbiology .Acidity Determination Milk and Milk Products .Brie Milk and Milk Products .Food and Animal Feeding Stuffs Microbiology .Calcium Content Milk and Milk Products .Metallic Materials .Food and Animal Feeding Stuffs Microbiology .Food and Animal Feeding Stuffs .Metallic Materials .Test Method Metallurgy .Iron Pipes Metallurgy . Subject Milk and Milk Products - Cheese Milk and Milk Products - Cheese Milk and Milk Products - Cheese Milk and Milk Products - Cheese - Fat Content Determination Milk and Milk Products - Cheese - Fat Content Determination Milk and Milk Products - Cheese - Processed Milk and Milk Products - Cheese - Processed Milk and Milk Products - Cheese,Whey - Dry Matter Determination Milk and Milk Products - Cheese,Whey - Fat Content Determination Milk and Milk Products - Cheeses in Brine. Milk and Milk Products - Condensed Milk. Milk and Milk Products - Copper Content Determination Milk and Milk Products - Cottage Cheese Milk and Milk Products - Coulommiers Milk and Milk Products - Cream Cheese Milk and Milk Products - Cream Fat Content Milk and Milk Products - Danbo Milk and Milk Products - Determination of Nitrogen Content Milk and Milk Products - Edam Milk and Milk Products - Edible Casein Products Milk and Milk Products - Emmentaler Milk and Milk Products - Evaporated Milk Milk and Milk Products - Fat Acidity Determination Milk and Milk Products - Fat Content Determination Milk and Milk Products - Fat Content Determination Milk and Milk Products - Fat Content Determination Milk and Milk Products - Fat Content Determination Milk and Milk Products - Fat Content Determination Milk and Milk Products - Fat Content Determination Milk and Milk Products - Fat Content Determination Milk and Milk Products - Filled Milk Milk and Milk Products - Gouda Milk and Milk Products - Grating Cheese Milk and Milk Products - Havarti Milk and Milk Products - Ice and Milk Lollies Milk and Milk Products - Ice Confectionery Standard Number GS 363 : 2003 GS ISO GS ISO GS ISO GS ISO 5943 : 2006Ψ 5534 : 2004Ψ 3433 : 1975Ψ 1735 : 2004Ψ Page 27 203 198 166 142 26 27 159 144 27 23 201 25 25 32 154 24 246 24 28 24 23 143 237 237 142 224 153 142 135 2 24 26 24 4 226 GS 358 : 2003 GS 367 : 2003 GS ISO GS ISO 2920 : 2004Ψ 1854 : 1999Ψ GS 370 : 2003 GS 335 : 2003 GS ISO 5738 : 2004Ψ GS 351 : 2003 GS 352 : 2003 GS 564 : 2003 GS ISO 2450 : 1999Ψ GS 342 : 2003 GS ISO 8968-1 : 2001Ψ GS 343 : 2003 GS 378 : 2003 GS 347 : 2003 GS 336 : 2003 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS 1740 : 2004Ψ 8262-1 : 2005Ψ 8262-2 : 2005Ψ 1737 : 1999Ψ 7208 : 1999Ψ 2446 : 1976Ψ 1736 : 2000Ψ 1211 : 1999Ψ 98 : 2004 GS 344 : 2003 GS 357 : 2003 GS 345 : 2003 GS 100 : 2004 GS ISO 7328 : 1999Ψ 357 Subject Milk and Milk Products - Ice Cream Milk and Milk Products - Ice Cream and Ice Confectionery Milk and Milk Products - Iron Content Determination Milk and Milk Products - Margarine Type Fat Spreads Milk and Milk Products - Microbiologial Examination Milk and Milk Products - Milk Fat Milk and Milk Products - Milk Powders Milk and Milk Products - Peroxide Valve Determination Milk and Milk Products - Protein Nitrogen Determination Milk and Milk Products - Provolone Milk and Milk Products - Saint - Paulin Milk and Milk Products - Sampling Milk and Milk Products - Samsoe Milk and Milk Products - Solids Content Determination Milk and Milk Products - Solids Content Determination Milk and Milk Products - Solids Content Determination Milk and Milk Products - Tilsiter Milk and Milk Products - Tin Content Determination Milk and Milk Products - Total Solids Determination. Milk and Milk Products - Vitamin A Content Determination Milk and Milk Products - Vitamin A Content Determination Milk and Milk Products - Vitamin D Determination Milk and Milk Products - Water Content Determination Milk and Milk Products - Whey Cheese Milk and Milk Products - Whey Cream Milk and Milk Products - Whey Powders Milk and Milk Products - Yoghurt Milk and Milk Products - Yoghurt - Flavoured Milk and Milk Products - Yoghurt - Sweetened Motor Vehicles - Base Brake Fluids for Hydraulic Systems Motor Vehicles - Hydraulic Systems - Non-Petroleum-Base Motor Vehicles - Periodic Inspection Non-Magnetic Coatings - Magnetic Method Nuts - Cashew Nuts Nuts - Groundnut Nuts - Peanut Butter Standard Number GS ISO GS 3728 : 2004Ψ Page 172 2 215 20 237 23 28 176 247 25 25 127 25 215 215 236 25 279 238 269 269 280 198 27 26 23 2 23 23 190 190 49 149 13 21 2 64 : 2004 6732 : 1985Ψ GS ISO GS 301 : 2007 GS ISO 8261 : 2001Ψ GS 334 : 2003 GS 380 : 2003 GS ISO GS ISO 3976 : 2006Ψ 8968-5 : 2001Ψ GS 350 : 2003 GS 349 : 2003 GS ISO 707 : 1997Ψ GS 346 : 2003 GS ISO GS ISO GS ISO 6734 : 1989Ψ 6731 : 1989Ψ 8070 : 2007Ψ GS 348 : 2003 GS ISO 14377 : 2002Ψ GS ISO 8381 : 2000Ψ GS ISO 12080-2 : GS ISO 12080-1 : GS ISO 14892 : 2002Ψ GS ISO 5536 : 2002Ψ GS 371 : 2003 GS 355 : 2003 GS 339 : 2003 GS 99 : 1990 GS 338 : 2003 GS 337 : 2003 GS ISO GS ISO 4925 : 2005Ψ 4926 : 2006Ψ GS 806 : 2006 GS ISO 2178 : 1982Ψ GS 212 : 2006 GS 313 : 2001 GS 49 : 2005 358 Subject Nuts - Prevention and Reduction of Aflatoxin Contamination - Groundnuts Nuts - Roasted Cashew Kernels Nuts - Shea Butter (Unrefined) Nuts - Shea Kernel and Shea Butter Nuts - Shea Kernel and Shea Butter - Terminologies Nuts - Shea Nuts Office Machines - Typewriter Ribbons Optical Equipments - Centring Tolerances Optical Equipments - Non-toleranced Data Optical Equipments - Optical Elements and Cemented Assemblies Optical Equipments - Surface Treatment Coating Packaging - Blow Moulded Polyethylene Containers Packaging - Conditions for Testing Packaging - Filled Transport Packages Packaging - Filled Transport Packaging Packaging - General Rules - Principles Packaging - Horizontal Impact Tests Packaging - Jute Sacks Packaging - Multiwall Paper Sacks for Cement Packaging - Polyethylene Film Wrappers Packaging - Polypropylene Woven Sack Packaging - Polystyrene Box for Fish Packaging Packaging - Polystyrene Food Containers Packaging - PVC Bottles for Edible Oil Packaging - Rigid Rectangular- Dimensions Packaging - Rolling Test Packaging - Sampling Empty Sacks Packaging - Stacking Tests - Static Load Packaging - Unit Load Size Packaging - Vertical Random Vibration Test Packaging - Vibration Tests Packaging - Water - Spray Test Paints and Vanishes - Colour Measurement Paints and Varnishes - Assessment of Blistering Paints and Varnishes - Bend Test Paints and Varnishes - Brush and Roller Standard Number GS 1003 : 2009 GS 957 : 2009 GS 238 : 2006 GS 956 : 2008 GS 953 : 2008 GS 824 : 2007 GS 242 : 1999 GS ISO 10110-6 : Page 63 59 15 59 59 51 16 256 256 256 256 5 149 181 269 181 150 31 8 9 5 9 13 29 165 158 221 150 170 271 150 158 232 187 139 49 GS ISO 10110-11 : 1996Ψ GS ISO 10110-10 : 2004Ψ GS ISO 10110-9 : GS 116 : 2007 GS ISO GS ISO 2233 : 2000Ψ 4180-2 : 1980Ψ GS ISO 12048 : 1994Ψ GS ISO GS ISO 4180-1 : 1980Ψ 2244 : 2000Ψ GS 527 : 2008 GS 156 : 2007 GS 173 : 2011 GS 118 : 2007 GS 174 : 1998 GS 216 : 1998 GS 442 : 2004 GS ISO GS ISO GS ISO GS ISO GS ISO 3394 : 1984Ψ 2876 : 1985Ψ 7023 : 1983Ψ 2234 : 2000Ψ 3676 : 1983Ψ GS ISO 13355 : 2001Ψ GS ISO GS ISO GS ISO GS ISO GS ISO 2247 : 2000Ψ 2875 : 2000Ψ 7724-3 : 1984Ψ 4628-2 : 2003Ψ 1519 : 2002Ψ GS 800 : 2005 359 Subject Paints and Varnishes - Chalking Degree Paints and Varnishes - Colour - Visual Comparison Paints and Varnishes - Colour Measurement Paints and Varnishes - Colour Measurement Paints and Varnishes - Consistency Paints and Varnishes - Contrast Ratio Paints and Varnishes - Decorative high gloss enamel paint for interior and exterior use Paints and Varnishes - Degradation of Coating Paints and Varnishes - Emulsion Base Textured Wall Coatings - Interior and Exterior Paints and Varnishes - Emulsion Paint Paints and Varnishes - Emulsion Putty Paints and Varnishes - Enamel Paint Paints and Varnishes - Exposure to Artificial Weathering Paints and Varnishes - Finess of Grind Paints and Varnishes - Hard-Drying Time Paints and Varnishes - Heat Effect Paints and Varnishes - Lacquer Thinner Paints and Varnishes - Lead Content Paints and Varnishes - Mineral Solvent ( Turpentine) Paints and Varnishes - Natural Weathering Assessment Paints and Varnishes - Nitrocellulose Lacquer Paints and Varnishes - Non-Volatile Matter Paints and Varnishes - Paint-Free Test Paints and Varnishes - Powder Cement Paint Paints and Varnishes - Resistance to Liquids Paints and Varnishes - Resistance to Liquids Paints and Varnishes - Resistance to Skin Paints and Varnishes - Resistance to Washing Paints and Varnishes - Rusting Degree Paints and Varnishes - Sampling Paints and Varnishes - Sanding Sealer Paints and Varnishes - Skin and Coarse Particles Paints and Varnishes - Specula Gloss Paints and Varnishes - Standard Panels Paints and Varnishes - Steel Substrates - Abrasive Blast Cleaning Paints and Varnishes - Steel Substrates - Almandite Garnet Standard Number GS ISO GS ISO GS ISO GS ISO Page 187 170 231 231 47 157 10 187 22 10 48 10 268 140 47 164 48 173 27 156 48 165 171 17 157 157 47 48 186 282 48 47 157 139 239 267 4628-6 : 2007Ψ 3668 : 1998Ψ 7724-1 : 1984Ψ 7724-2 : 1984Ψ GS 782 : 2005 GS ISO 2814 : 1973Ψ GS 182 : 1995 GS ISO 4628-1 : 2003Ψ GS 333 : 2009 GS 181 : 2005 GS 796 : 2005 GS 180 : 2005 GS ISO 11507 : 2007Ψ GS ISO 1524 : 2000Ψ GS 785 : 2005 GS ISO 3248 : 1998Ψ GS 795 : 2005 GS ISO 3856-1 : 1984Ψ GS 369 : 2006 GS ISO 2810 : 2004Ψ GS 797 : 2005 GS ISO GS ISO 3251 : 2003Ψ 3678 : 1976Ψ GS 276 : 2003 GS ISO GS ISO 2812-1 : 1993Ψ 2812-2 : 2006Ψ GS 784 : 2005 GS 793 : 2005 GS ISO 4628-3 : 2003Ψ GS ISO 15528 : 2000Ψ GS 794 : 2005 GS 781 : 2005 GS ISO GS ISO GS ISO 2813 : 1994Ψ 1514 : 2004Ψ 8504-2 : 2000Ψ GS ISO 11126-10 : 2000Ψ 360 Subject Paints and Varnishes - Steel Substrates - Assessment of Dust Paints and Varnishes - Steel Substrates - Chilled-Iron Grit Paints and Varnishes - Steel Substrates - Chloride on Cleaned Surfaces Paints and Varnishes - Steel Substrates - Coal Furnace Slag Paints and Varnishes - Steel Substrates - Conductometric Determination of Water- Soluble Paints and Varnishes - Steel Substrates - Copper Refinery Slag Paints and Varnishes - Steel Substrates - Fused Aluminium Oxide Paints and Varnishes - Steel Substrates - General Introduction Paints and Varnishes - Steel Substrates - General Introduction Paints and Varnishes - Steel Substrates - General Principles Paints and Varnishes - Steel Substrates - Grading Surface Profile ( Comparator Procedure) Paints and Varnishes - Steel Substrates - Hand and Power Tool Cleaning Paints and Varnishes - Steel Substrates - High Carbon Cast- Steel Shot and Grit Paints and Varnishes - Steel Substrates - Iron Furnace Slag Paints and Varnishes - Steel Substrates - Low-Carbon Cast-Steel Shot Paints and Varnishes - Steel Substrates - Nickel Refinery Slag Paints and Varnishes - Steel Substrates - Olivine Sand Paints and Varnishes - Steel Substrates - Staurolite Paints and Varnishes - Steel Substrates - Surface Cleanliness Paints and Varnishes - Steel Substrates - Surface Roughness Paints and Varnishes - Surface Drying Test Paints and Varnishes - Transparency Paper and Paper Products - Aqueous Extracts Paper and Paper Products - Carbon Paper Paper and Paper Products - Compressive Strength - Ring Crush Method Paper and Paper Products - Corrugated Fibreboard - Determination of the Grammage Paper and Paper Products - Corrugated Fibreboard - Determination of Water Resistance - Standard Number GS ISO 8502-3 : 1992 Page 240 265 239 266 240 266 266 265 265 240 240 241 265 266 265 266 266 267 239 240 139 48 212 16 269 161 161 225 123 9 123 154 121 52 118 118 GS ISO 11124-2 : GS ISO 8502-2 : 2005Ψ GS ISO 11126-4 : GS ISO 8502-9 : 1998Ψ GS ISO 11126-3 : GS ISO 11126-7 : GS ISO 11126-1 : GS ISO 11124-1 : GS ISO GS ISO GS ISO 8504-1 : 2000Ψ 8503-2 : 1988Ψ 8504-3 : 1993Ψ GS ISO 11124-3 : GS ISO 11126-6 : GS ISO 11124-4 : GS ISO 11126-5 : GS ISO 11126-8 : GS ISO 11126-9 : GS ISO GS ISO GS ISO 8501-2 : 1994Ψ 8503-1 : 1988Ψ 1517 : 1973Ψ GS 798 : 2005 GS ISO 6588-2 : 2005Ψ GS 241 : 1999 GS ISO 12192 : 2002Ψ GS ISO GS ISO 3039 : 1975Ψ 3038 : 1975Ψ 7263 : 1994Ψ 534 : 2005Ψ Paper and Paper Products - Corrugated Medium - Determination of the Flat Crush Resistance GS ISO Paper and Paper Products - Determination of Thickness, Density and Volume Paper and Paper Products - Facial Tissue Paper Paper and Paper Products - Grammage Determination Paper and Paper Products - Measurement of Difuse blue Reflectance Factor Paper and Paper Products - Moisture Content - Oven-drying Method Paper and Paper Products - Napkin / Serviettes Paper and Paper Products - Sampling- Determine Average Quality Paper and Paper Products - Standard Atmosphere and Conditioning of Samples GS ISO GS 172 : 2007 GS ISO GS ISO GS ISO 536 : 1995Ψ 2470 : 1999Ψ 287 : 1985Ψ GS 837 : 2007 GS ISO GS ISO 186 : 2002Ψ 187 : 1990Ψ 361 Subject Paper and Paper Products - Tissue Paper - Determination of Thickness Paper and Paper Products - Tissue Paper - Grammage Paper and Paper Products - Tissue Paper - Tensil Strength and Tensile Energy Absorption Paper and Paper Products - Toilet Paper in Rolls Paper and Paper Products - Water Absorptiveness Pesticides - Aerosol Dispensers Petroleum and Petroleum Products - Aqueous Foams - Immiscible Volatile Liquids Petroleum and Petroleum Products - Base Oils Petroleum and Petroleum Products - Brazed Aluminium Plate - Fin Heat Exchangers Petroleum and Petroleum Products - Determination of Rust - Prevention Petroleum and Petroleum Products - Downhole - Subsurface Safety Valve Equipment Petroleum and Petroleum Products - Drilling and Well - Servicing Equipment Petroleum and Petroleum Products - Ecological Considerations -Surface Washing Agents Petroleum and Petroleum Products - Ecological Considerations -Surface Washing Agents Petroleum and Petroleum Products - Lubricating Grease Petroleum and Petroleum Products - Mechanical Power Transmission - Applications Petroleum and petroleum Products - Oil Spill Recovery Petroleum and petroleum Products - Oil -Spill Trajectory Models Petroleum and Petroleum Products - Plate - and - Frame Heat Exchangers Petroleum and petroleum Products - Qualitative - Skimmer Performance Petroleum and Petroleum Products - Quality Management Systems Petroleum and Petroleum Products - Subsea Production Systems - General Requirements Petroleum and Petroleum Products - Subsea Production Systems - Through FlowlineSyst Petroleum and Petroleum Products - Subsea Production Systems - Umbilicals Standard Number GS ISO 12625-3 : GS ISO 12625-6 : GS ISO 12625-4 : GS 230 : 2007 GS ISO 535 : 1991Ψ Page 270 270 270 15 123 21 GS 312 : 2007 GS F 1129/F 1129M : 81 52 282 263 260 280 81 81 51 261 84 85 282 84 301 274 275 275 274 275 76 276 85 282 205 77 77 172 82 83 GS 838 : 2008 GS ISO 15547-2 : GS ISO 11007 : 1997Ψ GS ISO 10432 : 2004Ψ GS ISO 14693 : 2003Ψ GS F GS F 1279 : 2008Ψ 1280 : 2008Ψ GS 828 : 2008 GS ISO 10441 : 2007Ψ GS F GS F 1780 : 1997Ψ 2067 : 2007Ψ GS ISO 15547-1 : GS F 2008 : 2000Ψ GS ISO TS 29001 : 2010Ψ GS ISO 13628-1 : GS ISO 13628-3 : GS ISO 13628-5 : Petroleum and Petroleum Products - Subsea Production Systems - Unbonded Flexible Pipe GS ISO 13628-2 : Petroleum and Petroleum Products - Subsea Production Systems- Completion/ WorkoverRis GS ISO 13628-7 : Petroleum and Petroleum Products - Acidity in Volatile Solvents and Chemical Intermediates Petroleum and Petroleum Products - Air -Cooled Heat Exchangers Petroleum and petroleum Products - Airborne Remote - Detection and Monitoring Petroleum and Petroleum Products - Aluminium Alloy Drill Pipe Petroleum and Petroleum Products - Ash Petroleum and Petroleum Products - Automatic Sampling of Petroleum Petroleum and Petroleum Products - Automotive Spark - Ignition Engine Fuel Petroleum and Petroleum Products - Base Number - Perchloric Acid Potentiometric Titration Petroleum and Petroleum Products - Bioremediation Petroleum and Petroleum Products - Bioremediation - land GS D 1613 : 2006Ψ GS ISO 13706 : 2005Ψ GS F 2327 : 2008Ψ GS ISO 15546 : 2007Ψ GS ISO 6245 : 2001Ψ GS D 4177 : 1995Ψ GS D 4814 - 06 : 2006Ψ GS ISO GS F GS F 3771 : 1994Ψ 1600 : 1995Ψ 1693 : 1996Ψ 362 Subject Petroleum and Petroleum Products - Boom - Water Body Classifications Petroleum and Petroleum Products - Braking System Petroleum and Petroleum Products - Calculated Cetane Index by Four Variable Equation Petroleum and Petroleum Products - Calculation of Heater - TubeThickness in Petroleum Petroleum and Petroleum Products - Calibration of Vertical Cylindrical Tanks - Optical Petroleum and Petroleum Products - Calibration of Vertical Cylindrical Tanks - Optical Petroleum and Petroleum Products - Calibration of Vertical Cylindrical Tanks -Strapping Petroleum and Petroleum Products - Calibration on Vertical Cylindrical Tanks Petroleum and Petroleum Products - Calibration on Vertical Cylindrical Tanks Petroleum and Petroleum Products - Calibration- Volumetric Tanks Petroleum and Petroleum Products - Carbon Residue - Conradson Method Petroleum and Petroleum Products - Casing Bow- Spring Centralizers Petroleum and Petroleum Products - Cement Formulations - Static Gel Strength Petroleum and Petroleum Products - Centralizer Placement and Stop-Collar Testing Petroleum and Petroleum Products - Cetane Number of Diesel Fuel Oil Petroleum and petroleum Products - Cleaning - Oiled Shorelines and Habitats Petroleum and Petroleum Products - Cloud Point Determination Petroleum and Petroleum Products - Cloud Point of Petroleum Products Petroleum and Petroleum Products - Collection and Exchange - Data Equipment Petroleum and Petroleum Products - Composite Repairs - Pipework -, Standard Number GS F GS ISO 1523 : 1994Ψ 3871 : 2000Ψ Page 82 174 77 275 229 229 228 229 229 236 212 259 259 259 75 86 161 76 278 301 293 85 148 76 275 75 79 281 281 270 270 242 78 76 275 77 GS D 4737 : 2004Ψ GS ISO 13704 : 2007Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 7507-2 : 2005Ψ 7507-3 : 2006Ψ 7507-1 : 2003Ψ 7507-4 : 1995Ψ 7507-5 : 2000Ψ 8222 : 2002Ψ 6615 : 1993Ψ GS ISO 10427-1 : GS ISO 10426-6 : GS ISO 10427-2 : GS D 613 : 2005Ψ GS F GS ISO 2464 : 2005Ψ 3015 : 1992Ψ GS D 2500 : 2005Ψ GS ISO 14224 : 2006Ψ GS ISO TS 24817 : 2006Ψ Petroleum and Petroleum Products - Composite Repairs for Pipework - Qualification and Design, GS ISO 24817 : 2006Ψ Petroleum and petroleum Products - Containment Boom Performance Data Petroleum and Petroleum Products - Copper Petroleum and Petroleum Products - Copper in Water Petroleum and Petroleum Products - Corrosion -Resistant Alloy Seamless Tubes Petroleum and Petroleum Products - Corrosiveness to Copper from Petroleum Products by Petroleum and Petroleum Products - Coulometric Karl Fisher Titration - Test Method Petroleum and Petroleum Products - Cracking - Resistant Carbon and Low-Alloy Steels GS F GS ISO 2084 / F 2084M : 2160 : 1998Ψ GS D 1688 : 2002Ψ GS ISO 13680 : 2010Ψ GS D 130 : 2004Ψ GS E 1064 : 2005Ψ GS ISO 15156-2 : Petroleum and Petroleum Products - Cracking - Resistant CRAs ( Corrosion - Resistant Alloys)GS ISO 15156-3 : Petroleum and Petroleum Products - Cylindrical Tank Calibration Petroleum and Petroleum Products - Cylindrical Tanks Calibration Petroleum and Petroleum Products - Definition of Classes Petroleum and Petroleum Products - Denatured Fuel Ethanol-Determination of Ethanol GS ISO 12917-2 : GS ISO 12917-1 : GS ISO 8681 : 1986Ψ GS D 5501 - 04 : 2004Ψ Petroleum and Petroleum Products - Density, Relative Density (Specific Gravity), or api gravity GS D 1298 : 1999Ψ Petroleum and Petroleum Products - Design and Installation - Piping Systems on Offshore Petroleum and Petroleum Products - Determination of Carbon Residue GS ISO 13703 : 2000Ψ GS D 4530 : 2006Ψ 363 Subject Petroleum and Petroleum Products - Determination of Colour Petroleum and Petroleum Products - Determination of Dropping Point Petroleum and Petroleum Products - Determination of Free and Total Glycerin in B-100 Petroleum and Petroleum Products - Determination of PHE of Ethanol Standard Number GS ISO GS ISO 2049 : 1996Ψ 2176 : 1995Ψ Page 146 149 79 78 289 165 74 76 284 287 258 273 273 285 300 300 285 273 274 285 274 272 258 272 85 83 300 275 290 290 290 291 282 257 289 323 GS D 6584 : 2007Ψ GS D 6423 : 1999Ψ Petroleum and Petroleum Products - Determination of the Extreme Pressure and Anti - Wear of GS ISO 20623 : 2003Ψ Petroleum and Petroleum Products - Distillation Characteristics at Atmospheric Pressure GS ISO 3405 : 2000Ψ Petroleum and Petroleum Products - Distillation of Petroleum Products at atmospheric pressure GS D 86 : 2005Ψ Petroleum and Petroleum Products - Distillation of Petroleum Products at Reduced Pressure Petroleum and Petroleum Products - Downhole Equipment - Lock Mandrels and Landing Petroleum and Petroleum Products - Downhole Equipment - Sand screens Petroleum and Petroleum Products - Drilling and Production - Wellhead and Christmas Tree Petroleum and Petroleum Products - Drilling and Production Equipment - Hoisting Petroleum and Petroleum Products - Drilling and Production Equipment Petroleum and Petroleum Products - Drilling and Production Equipment Petroleum and Petroleum Products - Drilling and Production Equipment GS D 1160 : 2006Ψ GS ISO 16070 : 2005Ψ GS ISO 17824 : 2009Ψ GS ISO 10423 : 2009Ψ GS ISO 13535 : 2000Ψ GS ISO 13533 : 2001Ψ GS ISO 17078-1 : GS ISO TR 13624-2 : GS ISO 13624-1 : GS ISO 17078-2 : Petroleum and Petroleum Products - Drilling and Production Equipment - Design and Operation Petroleum and Petroleum Products - Drilling and Production Equipment - Flow- Control Devices Petroleum and Petroleum Products - Drilling and Production Equipment - Inspection, Petroleum and Petroleum Products - Drilling And Production Equipment - Marine Drilling Petroleum and Petroleum Products - Drilling and Production Equipment - Running Tools, for Petroleum and Petroleum Products - Drilling and Production Equipment - Well - Servicing Petroleum and Petroleum Products - Drilling Fluids - Evaluation Petroleum and Petroleum Products - Drilling Fluids - Laboratory Testing Petroleum and Petroleum Products - Drilling Fluids - Specifications and Tests Petroleum and petroleum Products - Ecological - Chemical Dispersants - Oil Spill GS ISO 13534 : 2000Ψ GS ISO 13625 : 2002Ψ GS ISO 17078-3 : GS ISO 13626 : 2003Ψ GS ISO 13501 : 2005Ψ GS ISO 10416 : 2008Ψ GS ISO 13500 : 2008Ψ GS F 2205 : 2007Ψ 1657 : 1996Ψ Petroleum and Petroleum Products - Emergency Joining of Booms - Incompatible Connectors GS F Petroleum and Petroleum Products - Equations and Calculations - Casing, Tubing, Drill Pipe Petroleum and Petroleum Products - Evaluation and Testing -Thread Compounds - Casing, GS ISO TR 10400 : 2007Ψ GS ISO 13678 : 2010Ψ GS ISO 21809-3 : Petroleum and Petroleum Products - External Coatings - Buried or Submerged Pipelines - Field Petroleum and Petroleum Products - External Coatings - Buried or Submerged Pipelines Petroleum and Petroleum Products - External Coatings - Buried or Submerged Pipelines Petroleum and Petroleum Products - External Coatings - Buried or Submerged Pipelines Petroleum and Petroleum Products - Field Inspection - Plain - End Drilling Pipe Petroleum and Petroleum Products - Field Testing - Water - Based Fluids Petroleum and Petroleum Products - Fixed Concrete Offshore Structures Petroleum and Petroleum Products - Fixed Storage Tanks GS ISO 21809-1 : GS ISO 21809-2 : GS ISO 21809-4 : GS ISO 15463 : 2003Ψ GS ISO 10414-1 : GS ISO 19903 : 2006Ψ GS OIML R 71 : 364 Subject Petroleum and Petroleum Products - Flare - General Refinery and Petrochemical Service Petroleum and Petroleum Products - Float Equipment- Performance Testing Petroleum and Petroleum Products - Floating Offshore Structures Petroleum and Petroleum Products - Gas Oil - (Diesel Fuel) Petroleum and Petroleum Products - Gasoline - Alcohol by Gas Chromatography Standard Number GS ISO 25457 : 2008Ψ GS ISO 10427-3 : GS ISO 19904-1 : GS 141 : 2005 GS D 4815 - 04 : 2004Ψ Page 293 260 289 6 77 78 260 260 279 279 279 279 80 75 281 287 80 226 257 85 86 85 84 6 78 284 78 32 148 51 51 49 51 50 50 50 Petroleum and Petroleum Products - Gasoline - Vapor Pressure Oxygenate Blends ( Dry Method)GS D 4953 - 06 : 2006Ψ Petroleum and Petroleum Products - General - Purpose Oil Systems Petroleum and Petroleum Products - General Requirements Petroleum and Petroleum Products - Glass - Reinforced Plastics - Fabrication, Installation and Petroleum and Petroleum Products - Glass - Reinforced Plastics - Qualification and Manufacture Petroleum and Petroleum Products - Glass - Reinforced Plastics - System Design Petroleum and Petroleum Products - Glass - Reinforced Plastics - Vocabulary, Symbols, Petroleum and Petroleum Products - Guide - Oil / Water Mixtures Petroleum and Petroleum Products - Gum content in Fuels by Jet Evaporation Petroleum and Petroleum Products - H2s - Containing Environments - Cracking - Resistant Petroleum and Petroleum Products - Hazard Identification and Risk Assessment Petroleum and Petroleum Products - Hazardous Materials Training Petroleum and Petroleum Products - Hydraulic Braking Systems Petroleum and Petroleum Products - Inpection and Classification - Drill Stem Elements Petroleum and petroleum Products - In-Situ Burning - Ice Conditions Petroleum and petroleum Products - In-Situ burning - Oil in Ship Petroleum and petroleum Products - In-Situ Burning - Spilled oil - Fire Resistant Boom Petroleum and petroleum Products - In-Situ Burning - Spilled Oil - Ignition Devices Petroleum and Petroleum Products - Kerosine Petroleum and Petroleum Products - Lead - Gasoline by X-Ray Spectroscopy Petroleum and Petroleum Products - Life Cycle Costing - Methodology Petroleum and Petroleum Products - Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Petroleum and Petroleum Products - Liquefied Petroleum Gases Petroleum and Petroleum Products - Lubricating Grease and Petroleum - Cone Penetration Petroleum and Petroleum Products - Lubricating Oils - Monograde Oil - Diesel Engines GS ISO 10438-3 : GS ISO 10438-1 : GS ISO 14692-4 : GS ISO 14692-2 : GS ISO 14692-3 : GS ISO 14692-1 : GS F 1084 : 2008Ψ GS D 381 : 2004Ψ GS ISO 15156-1 : GS ISO 17776 : 2000Ψ GS F GS ISO 1011 : 2007Ψ 7309 : 1985Ψ GS ISO 10407-2 : GS F GS F GS F GS F 2230 : 2008Ψ 2533 : 2007Ψ 2152 : 2007Ψ 1990 : 2007Ψ GS 142 : 2009 GS D 5059 - 98 : 1998Ψ GS ISO 15663-1 : GS D 5453 - 06 : 2006Ψ GS 535 : 2005 GS ISO 2137 : 2007Ψ GS 830-1 : 2008 Petroleum and Petroleum Products - Lubricating Oils - Monograde Oil - Petrol Engines- Class GS 826-1 : 2008 Petroleum and Petroleum Products - Lubricating Oils - Monograde Oil - Petrol Engines- Class GS 807-1: 2008 Petroleum and Petroleum Products - Lubricating Oils - Monograde Oil - Petrol Engines- Class GS 820-1 : 2008 Petroleum and Petroleum Products - Lubricating Oils - Monograde Oil - Petrol Engines-Class SEGS 816-1 : 2008 Petroleum and Petroleum Products - Lubricating Oils - Monograde Oil for Petrol Engines Petroleum and Petroleum Products - Lubricating Oils - Multigrade Oil for Petrol Engines GS 815-1 : 2008 GS 815-2 : 2008 365 Oil Spill Dispersant .Basic Surface Process Safety Systems Petroleum and Petroleum Products .offshore Structures .Ecological Considerations GS ISO 19901-7 : GS ISO 10414-2 : GS F GS F GS F GS F GS F GS F GS F GS F GS F GS F GS F GS F 1779 : 2008Ψ 2438 : 2004Ψ 715 : 2007Ψ 2532 : 2006Ψ 1460 : 2007Ψ 1737/ F 1737M : 1413 : 2007Ψ 2465 : 2005Ψ 2059 : 2006Ψ 1738 : 2010Ψ 1210 : 2008Ψ 1231 : 2008Ψ 366 .Offshore Structures .Slide Connector Petroleum and Petroleum Products .offshore Structures .Chemical Spills Petroleum and Petroleum Products .Membrane Technology .Offshore .offshore Structures .Oil Spill Dispersant .Metocean Design and Operating GS ISO 19901-1 : Petroleum and Petroleum Products .Requirements and Petroleum and Petroleum Products . Ventilation Petroleum and Petroleum Products .Determination of Additive Elements Petroleum and Petroleum Products .Oil Spill Dispersant Petroleum and Petroleum Products .Heating.Measurement of Liquid Levels Standard Number GS ISO 3987 : 1994Ψ Page 176 78 77 186 272 272 279 82 75 82 78 87 291 258 281 282 288 288 288 288 288 288 288 257 84 86 79 86 82 83 81 86 84 83 81 81 GS D 4951 .Measurement of Viscous Properties of Completion Fluids GS ISO 13503-1 : Petroleum and Petroleum Products .Lubricating Oils.Marine Operations Petroleum and Petroleum Products .Oil on Water .Offshore Production Installations .Methanol (Methyl Alcohol) Petroleum and Petroleum Products .Swirling Flask Petroleum and Petroleum Products .Single-Point Spray Systems Petroleum and petroleum Products .offshore Structures .Nameplate Recovery Rate -Stationary Oil Skimmer Systems GS F Petroleum and Petroleum Products .Geotechnical and Foundation Design Petroleum and Petroleum Products .Determination of Deposition Petroleum and Petroleum Products .Seismic Design Procedures and Criteria GS ISO 19901-2 : Petroleum and Petroleum Products .Oil Spill Dispersants.Oil .Weight Control During Engineering Petroleum and Petroleum Products .Lubricating Oils and Additives Petroleum and Petroleum Products .Ecological Considerations Petroleum and Petroleum Products .Mitigation .offshore Structures .Mixing and Handling of Liquid samples GS ISO 14691 : 2008Ψ GS F 1525 : 1996Ψ GS D 1152 : 2006Ψ GS F 1524 : 1995Ψ GS D 5854 : 1996Ψ 2709 : 2008Ψ Petroleum and petroleum Products .Boom and Nozzle Systems Petroleum and Petroleum Products .Coated Fabrics Petroleum and petroleum Products .Thermoplastics Petroleum and Petroleum Products .Offshore Production Installations .Subject Petroleum and Petroleum Products .Non-Metallic Materials .offshore Structures .Oil Spill Dispersant .General Requirements GS ISO 23936-1 : GS ISO 10418 : 2003Ψ GS ISO 15138 : 2007Ψ GS ISO 15544 : 2000Ψ GS ISO 19901-6 : GS ISO 19901-5 : GS ISO 19900 : 2002Ψ GS ISO 19901-4 : Petroleum and Petroleum Products .Oil Spill Dispersant .Stationkeeping Systems Petroleum and Petroleum Products .Oil Spill Dispersants .Boom and Nozzle Systems Petroleum and Petroleum Products .Chemical Spills Petroleum and Petroleum Products .Oil Spill .Boom and Nozzle Systems Petroleum and petroleum Products .Measurement of Properties of Proppants used in Hydraulic GS ISO 13503-2 : Petroleum and Petroleum Products .Oil Spill Dispersants.Manual Sampling of Petroleum Products Petroleum and Petroleum Products .Reporting Petroleum and petroleum Products .Oil Spill Dispersant .Mechanical Power Tranmission Petroleum and Petroleum Products .Based Fluid Petroleum and Petroleum Products .06 : 2006Ψ GS D 4057 : 2006Ψ GS ISO 4512 : 2000Ψ Petroleum and Petroleum Products .Oil Spill Control and Storage . Pipeline Transportation Systems .Skimmers Oil Spill Petroleum and Petroleum Products .Sorbent Performance .Purpose Oil Systems Petroleum and Petroleum Products .Oxidation Stability of Gasoline Petroleum and Petroleum Products .Measuring Stimulation and Gravel .Special.Absorbents Petroleum and Petroleum Products .Progressing Cavity Pump Systems .Determination in Crude Oil Petroleum and Petroleum Products .Shell-and-Tube Heat Exchangers Petroleum and petroleum Products .On .Oil Spills .Saponification Petroleum and Petroleum Products .Oil Spill Thickness Petroleum and petroleum Products .Oil Spill Dispersants.Ecological Considerations Petroleum and Petroleum Products .Organic Chloride .Pipeline Transportation Systems .Subject Petroleum and Petroleum Products .Phosphorus in Gasoline Petroleum and Petroleum Products .Techniques GS ISO 10424-1 : GS ISO 6293-1 : 1996Ψ GS ISO 10438-4 : GS ISO 16812 : 2007Ψ GS F 2204 : 2009Ψ Petroleum and Petroleum Products .Progressing Cavity Pump Systems .Requirements for Establishment and Operations .Procedure .Welding of Pipelines GS ISO 13847 : 2000Ψ Petroleum and Petroleum Products .Production Assurance and Reliability Management Petroleum and Petroleum Products .Measuring Conductivity of Proppants GS ISO 21329 : 2004Ψ GS ISO 23251 : 2006Ψ GS ISO 13503-5 : GS ISO 13503-4 : Petroleum and Petroleum Products .Based Limit Petroleum and Petroleum Products .Pipeline Transportation Systems .Pipeline Transportation Systems .Self-Acting Gas Seal Support Systems Petroleum and Petroleum Products .Flanges Petroleum and Petroleum Products .Pressure-Relieving and Depressuring Systems Petroleum and Petroleum Products .Pipeline Transportation Systems .Oil Spill Response Boom .Procedure .Skimmer Performance Data Petroleum and petroleum Products .Retail GS 942 : 2010 Petroleum and Petroleum Products .Offshore Pipelines Petroleum and Petroleum Products .04 : 2004Ψ GS D 525 : 2005Ψ GS PAS 1 : 2005 GS D 3231 : 2002Ψ GS ISO 15590-2 : GS ISO 15590-3 : GS ISO 15590-1 : Petroleum and Petroleum Products .Rotary Drill Stem Elements Petroleum and Petroleum Products .Artificial Lift GS ISO 20815 : 2008Ψ GS ISO 15136-1 : GS ISO 15136-2 : Petroleum and Petroleum Products .Spill Connection: Z-Connector GS F GS F GS F GS F 631 : 1999Ψ 1778 : 1997Ψ 716 : 2009Ψ 726 : 2006Ψ GS ISO 10438-2 : GS F 962 : 2004Ψ 367 .Pipeline Transportation Systems .Pipeline Transportation Systems .Shrinkage and Expansion .Reliability .Shoreline .Land Pipelines GS ISO 15589-2 : GS ISO 15589-1 : GS ISO 16708 : 2006Ψ Petroleum and Petroleum Products .Induction Bends Standard Number GS F GS F GS F GS F GS F 1209 : 2008Ψ 1093 : 1999Ψ 1607 : 1995Ψ 2534 : 2006Ψ 1788 : 2008Ψ Page 81 80 82 86 84 77 75 323 76 283 283 283 276 283 283 285 290 291 273 273 289 280 280 58 258 206 260 285 85 256 79 83 79 80 260 80 GS D 4929 .Fittings Petroleum and Petroleum Products .Artificial Lift Petroleum and Petroleum Products .Pack Fluid Petroleum and Petroleum Products .Pipeline Transportation Systems .Oil Spill Response Pumps Petroleum and petroleum Products .Test Procedures for Petroleum and Petroleum Products .Tensile Strength Petroleum and Petroleum Products .Formulations at Atmospheric GS ISO 10426-5 : Petroleum and Petroleum Products .In-Situ Burning Petroleum and Petroleum Products .PAS Petroleum and Petroleum Products .Sorbent Performance .Adsorbents Petroleum and Petroleum Products . GS ISO GS F 4269 : 2001Ψ 1599 : 1995Ψ GS ISO 10426-3 : GS ISO 10426-2 : Petroleum and Petroleum Products .Testing .Threading and Gauging .Storage Tank Under-Ground Installations Petroleum and Petroleum Products .Transportation Systems .Pipeline Valves Petroleum and Petroleum Products .Sulfated Ash from Lubricating Oils and Additives Petroleum and Petroleum Products .Storage.Pipeline Valves Petroleum and Petroleum Products .Water Distillation Method GS ISO GS ISO GS E 3104 : 1994Ψ 2909 : 2002Ψ 203 : 2001Ψ GS ISO 12937 : 2000Ψ GS ISO 3733 : 1999Ψ 368 .Subsurface Safety Valve .Design.Special-Purpose Applications Petroleum and Petroleum Products . Installation.Subsea Production Control Systems GS 1005-2 : 2010 GS 1006-1 : 2010 GS ISO 13628-6 : Petroleum and Petroleum Products .Steel Pipes . Operation Petroleum and Petroleum Products .DeepWater Well Cement Formulation.Testing of Foamed Cement Slurries .Storage and Maintenance of Liquefied Petroleum Gas in GS 1006-2 : 2010 Petroleum and Petroleum Products .Subsea Production Systems .Bonded Flexible Pipe Petroleum and Petroleum Products .Water Coulometric Determination Petroleum and Petroleum Products .Testing of Heavy Brines Petroleum and Petroleum Products .Sulfur in Petroleum Products by Wavelength Dispersive X-GS D 2622 : 2005Ψ Petroleum and Petroleum Products .Distribution and Maintenance of Liquified Petroleum and Petroleum Products .Casing or Tubing for Wells Standard Number GS F GS F 625 : 1994Ψ 1127 : 2007Ψ Page 79 80 260 269 268 63 64 64 63 63 63 275 275 275 275 258 75 75 290 76 181 82 259 259 259 272 258 278 279 280 294 163 159 79 270 172 GS ISO 10437 : 2003Ψ GS ISO 11961 : 2008Ψ GS ISO 11960 : 2004Ψ Petroleum and Petroleum Products .Well Cements.Transportation Systems .Temporary Storage Devices Petroleum and Petroleum Products .Transportation Systems .Viscosity Index Petroleum and Petroleum Products .Flexible Pipe Systems Petroleum and Petroleum Products .Storage and Maintenance of Liquefied Petroleum Gas in GS 1006-3 : 2010 Petroleum and Petroleum Products .Spills .Viscosity Petroleum and Petroleum Products .Spill Control Systems Petroleum and Petroleum Products .Drill Pipes Petroleum and Petroleum Products .Venting of Atmospheric and Low-Pressure Storage Tanks GS ISO 28300 : 2008Ψ Petroleum and Petroleum Products .Atmospheric Pressure.Sulfur Content Determination GS ISO 13628-10 : 2005Ψ GS ISO 13628-11 : 2007Ψ GS ISO 10417 : 2004Ψ GS D 874 : 2006Ψ GS D 664 : 2006Ψ GS ISO 20884 : 2004Ψ Petroleum and Petroleum Products .Subsea Production Systems .Storage and Distribution of Liquefied Petroleum Gas in GS 1006-4 : 2010 Petroleum and Petroleum Products .Sulfated Ash from Lubricating Oils and Additives Petroleum and Petroleum Products .Subject Petroleum and Petroleum Products .Containment of Hazardous Petroleum and Petroleum Products .Operated Vehicle Interfaces GS ISO 13628-8 : Petroleum and Petroleum Products .Steel.Rotary Shouldered Petroleum and Petroleum Products .Subsea Production Systems . Petroleum and Petroleum Products .Storage and Distribution Above-Ground Bulk Installations GS 1005-1 : 2010 Petroleum and Petroleum Products .Volumetric Karl Fischer Titration Test Petroleum and Petroleum Products .Steam Turbines . GS ISO 10426-4 : Petroleum and Petroleum Products .Testing .Subsea Pipeline Valves GS ISO 13503-3 : GS ISO 10424-2 : GS ISO 14310 : 2008Ψ GS ISO 14313 : 2007Ψ GS ISO 14723 : 2009Ψ Petroleum and Petroleum Products .Tank Calibration Petroleum and Petroleum Products . Steel Pipes Pipes and Fittings .Pipline Transportation Systems Phytosanitary Measures .Pest .Oiling Conditions -Shorelines Petroleum Products . 23 ) Phytosanitary Measures .Oiling Conditions -Shorelines Petroleum and Petroleum Products -Spill Response Barriers .Oil Spill Containment Boom Petroleum and Petroleum Products .Weight Ratio .Pipeline Components Pipes and Fittings .Rubber Hoses Pipes and Fittings .Risk Analysis Phytosanitary Measures . 7) Phytosanitary Measures .Cylindrical threads Pipes and Fittings .Protection of Plants Phytosanitary Measures .Regulated Pests ( N0.Protection of Plants (N0.Piping and Couplings Pipes and Fittings .Thermoplastics GS F GS ISO 10426-1 : GS F GS F GS F GS F 1872 : 2005Ψ 1686 : 2009Ψ 818 : 1993Ψ 1687 : 2009Ψ GS 140 : 2009 GS ISO 19902 : 2007Ψ GS ISO 13623 : 2009Ψ GS 1021 : 2011 GS 1015 : 2011 GS 1025 : 2011 GS 1018 : 2011 GS 1019 : 2011 GS 1024 : 2011 GS 1023 : 2011 GS 1020 : 2011 GS 1017 : 2011 GS 1022 : 2011 GS 1016 : 2011 GS ISO GS ISO 49 : 1994Ψ 1167-2 : 2006Ψ GS ISO 18553 : 2002Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 4145 : 1986Ψ 228-2 : 1987Ψ 7268 : 1983Ψ 4144 : 2003Ψ 9974-2 : 1996Ψ 9974-3 : 1996Ψ 3949 : 2004Ψ 4080 : 1991Ψ 5251 : 1981Ψ 5256 : 1985Ψ 2505 : 2005Ψ 9080 : 2003Ψ 369 .Guidelines Phytosanitary Measures .Pipework Pipes and Fittings .Thermoplastic Pipes Pipes and Fittings . 27) Phytosanitary Measures .Protection of Plants (N0. 15) Phytosanitary Measures .Protection of Plants (N0.Cast Iron Pipes and Fittings .Subject Standard Number 95 : 2005Ψ 2682 : 2007Ψ Page 74 86 258 84 83 80 83 6 289 273 65 64 66 65 65 66 66 65 65 65 65 115 135 287 180 119 225 180 253 254 175 179 193 193 154 248 Petroleum and Petroleum Products .Phytosanitary .Offshore Structure .Piping and Couplings Pipes and Fittings .Specification Petroleum and petroleum Products -Chemical Shoreline Cleaning Agents Petroleum and Petroleum Products -Document .Stainless Steel Pipes and Fittings .Pipe .Consignments Phytosanitary Measures .Plastic Hoses Pipes and Fittings .Fixed Steel Petrolum and Petroleum Products .Diagnostic Protocols .Methods for Assessment Pipes and Fittings .Verification .Export CertificationSystems (N0.Guidelines Pipes and Fittings .Well Cementing .1) Phytosanitary Measures .Surveillance .Water in Petroleum Products and Bituminous Materials by GS D Petroleum and petroleum Products .Non-alloy Steel Fittings Pipes and Fittings .Glossary Phytosanitary Measures .Petrol Petrolum and Petroleum Products .Determination of the Resistance of Internal Pressure Pipes and Fittings .Terminology Petroleum and Petroleum Products -Terminology . PVC U Pipes GS ISO GS 217 : 1999 370 .Melt Mass-Flow Rate (MFR) and Melt Volume-Flow Rate (MVR) GS ISO Plastic and Plastic Products .Containers for Cosmetics Plastic and Plastic Products .Citrus Planting Materials Planting Materials .Activated Carbon Plastic and Plastic Products .Plain Sockets for Pipes Plastic and Plastic Products .Density of Non-Cellular Plastics Plastic and Plastic Products .Plastic Pipes and Fittings GS 280 : 2005 GS 326 : 2004 GS 591 : 2004 GS 290 : 2007 GS 831 : 2008 GS ISO 264 : 1976Ψ GS 218 : 1998 GS ISO 13761 : 1996Ψ 1872-1 : 1993Ψ 1872-2 : 2007Ψ Plastic and Plastic Products .Pipes .Determination of the Viscosity of Polymers-Capillary Viscometers-GS ISO Plastic and Plastic Products .Dimensions and Tolerances Plastic and Plastic Products .Optical and Colour Properties Plastic and Plastic Products .Polyethylene (PE) Moulding Extrusion Materials Plastic and Plastic Products .Unplasticized Polyvinyl Chloride (PVC Pipes and Fittings .Fittings Plastic and Plastic Products .Acoustics Plastic and Plastic Products .Household Wares Plastic and Plastic Products .Moulding and Extrusion Plastic and Plastic Products .Unplasticized Poly for water supply Pipes and Fittings .Dichloromethane Plastic and Plastic Products .Optical Properties Plastic and Plastic Products .Blocking Resistance Plastic and Plastic Products .Plastic Drinking Straw Plastic and Plastic Products .Polyethylene (PE) Moulding Extrusion Materials .Designation GS ISO Plastic and Plastic Products .Pipes and Fittings Polyvinyl Chloride (PVC-M) Plastic and Plastic Products .Hoses Plastic and Plastic Products .Materials in contact with Food / Pharmaceuticals GS ISO 11922-1 : GS ISO 2048 : 1990Ψ GS 819 : 2008 GS ISO 3994 : 2007Ψ GS 613 : 2007 GS 595 : 2004 1133 : 2005Ψ Plastic and Plastic Products .Water Supply Planting Materials .Double Sockets Plastic and Plastic Products .Monobloc Chairs Plastic and Plastic Products .Evaluation .Bleeding of Colourants Plastic and Plastic Products .Polyethylene (PE) Materials .Ball point pen Plastic and Plastic Products .Pharmaceutical Containers Plastic and Plastic Products .Unplasticized Poly for water supply Pipes and Fittings .Determination of Tensile Properties .General Principles Standard Number GS ISO GS ISO GS ISO GS ISO Page 186 186 179 186 60 60 60 203 225 253 34 120 118 14 22 135 122 141 268 146 50 176 35 34 134 18 22 34 19 51 120 13 276 144 145 13 4422-5 : 1997Ψ 4422-1 : 1996Ψ 4132 : 1979Ψ 4427-1 : 2007Ψ GS 968 : 2009 GS 967 : 2009 GS 966 : 2009 GS ISO GS ISO GS ISO 5978 : 1990Ψ 7279 : 1984Ψ 9852 : 2007Ψ GS 599 : 2008 GS ISO GS ISO 266 : 1997Ψ 176 : 2005Ψ GS 221 : 2006 GS 325 : 2004 GS ISO GS ISO 1183-1 : 2004Ψ 527-1 : 1993Ψ 1628-2 : 1998Ψ Plastic and Plastic Products .Coated Fabrics .Pineapple Planting Materials Plastic and Plastic Products .Subject Pipes and Fittings .Mango Planting Materials Planting Materials . Cooling and Heating .Volumetric Expansion Plastics and Rubber .Quality Plans Quality Management Systems .Tensile properties Plastic and Plastic Products .Subject Plastic and Plastic Products .Guidelines for Improvements Quality Management Systems .Series Protection .Burning Behaviour .Houehold .Product and Company Certification Quality Management Systems .Tensile Stress-Stain Properties GS ISO 11650 : 1999Ψ GS ISO GS ISO GS ISO GS ISO 5149 : 1993Ψ 3795 : 1989Ψ 9128 : 2006Ψ 37 : 2005Ψ 371 .Thermoplastic Pipes Plastic and Plastic Products .Training Quality Management Systems .Brake Fluid Rubber and Rubber Products .Unplasticized Polyvinyl Chloride (PVC) Adaptor Fittings Plastic and Plastic Products .Safety Road Vehicles .Vocabulary Quantities and Units .Measurement Systems Quality Management Systems .Graphical Symbols .Unplasticized Poly.Requirements Quality Management Systems .Guidelines for Auditing Quality Management Systems .Properties Refrigerating Technology .Refrigerating Appliances .Refrigerants .Rulers Plastic and Plastic Products .Organic Farming Quality Management Systems .Fittings Plastic and Plastic Products .Recovery and/or Recycling Equipment Refrigerating Technology -Mechanical Refrigerating Systems .Viscosity of Polymers Plastic and Plastic Products .Single Sockets Plastic and Plastic Products .Designation System Refrigerating Technology .Configuration Management Quality Management Systems .Projects Quality Management Systems .General Principles Refrigerating Technology Refrigerating Technology .Refrigerators .Interior Materials Road Vehicles .Buckets Preferred Numbers .Refrigerators .Persons and Equipment Quality Management Systems .Vocabulary Plastic and Plastic Products .Enclosures of Electrical Equipment Protection .Refrigerants .Refrigerated Display Cabinets - Standard Number GS 282 : 2003 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 2045 : 1988Ψ Page 18 146 122 135 127 128 186 141 121 216 18 114 98 106 254 287 248 255 26 27 254 254 248 255 247 115 302 286 129 292 153 268 191 172 249 115 527-2 : 1993Ψ 1167-1 : 2006Ψ 727-1 : 2002Ψ 727-2 : 2005Ψ 4434 : 1977Ψ 1628-1 : 1998Ψ 472 : 1999Ψ 6801 : 1983Ψ GS 286 : 2011 GS ISO 3 : 1973Ψ GS IEC 60529 : 2001Ψ GS IEC 61032 : 1997Ψ GS ISO 10007 : 2003Ψ GS ISO 19011 : 2002Ψ GS ISO 9004 : 2009Ψ GS ISO 10012 : 2003Ψ GS 361 : 2003 GS 364 : 2001 GS ISO 10006 : 2003Ψ GS ISO 10005 : 2005Ψ GS ISO 9001 : 2008Ψ GS ISO 10015 : 1999Ψ GS ISO GS ISO 9000 : 2005Ψ 31-0 : 1992Ψ GS ISO/R 916 : 1968Ψ GS ISO 17584 : 2005Ψ GS ISO 817 : 2005Ψ GS ISO 23953-2 : 2410 : 1973Ψ Refrigerating Technology .Unplasticized Poly.Fittings Plastic and Plastic Products .Test for the Information of the consumer GS ISO Refrigerating Technology . Resistance to Penetration by Water Rubber and Rubber Products .Thermoplastics Rubber and Rubber Products.Ozone Resistance .(LPG) Rubber and Rubber Products .Hoses .Ultra-Violet Resistance Rubber and Rubber Products .Hoses .Heat Resistance Tests Rubber and Rubber Products .Hoses .Hydraulic Hoses Sampling .Hoses .Abrasion of Lining Rubber and Rubber Products .Polyethylene Rubber and Rubber Products .Steam Rubber and Rubber Products .Flammability Test Rubber and Rubber Products .Hoses and Hose Assemblies Rubber and Rubber Products .Coating Adhesion Rubber and Rubber Products .Bending Tests Rubber and Rubber Products .Hoses .Hoses .PVC Garden Hoses Rubber and Rubber Products .Apparent (Bulk) Density Rubber and Rubber Products .Hose .Determination of the effect of Liquids Rubber and Rubber Products .Teats for Feeding Bottles Rubber and Rubber Products .Hoses .Procedures (AQL) Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 845 : 2006Ψ 1746 : 1998Ψ 2411 : 2000Ψ 4649 : 2002Ψ 7233 : 2006Ψ Page 129 143 153 188 224 188 143 118 160 137 152 204 231 235 231 235 235 235 226 19 177 188 241 188 216 151 31 233 137 137 188 16 205 124 188 157 4674-1 : 2003Ψ 1817 : 2005Ψ 188 : 2007Ψ 2928 : 2003Ψ 1402 : 1994Ψ 2398 : 2006Ψ 6134 : 2005Ψ 7662 : 1988Ψ 8033 : 2006Ψ 7719 : 1997Ψ 8031 : 1993Ψ 8030 : 1995Ψ 8032 : 1997Ψ 7326 : 2006Ψ GS 292 : 2004 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 4023 : 1991Ψ 4672 : 1997Ψ 8580 : 1987Ψ 4641 : 2005Ψ 6802 : 2005Ψ 2286-2 : 1998Ψ GS 534 : 2004 GS ISO GS ISO GS ISO GS ISO 7854 : 1995Ψ 1420 : 2001Ψ 1403 : 2005Ψ 4633 : 2002Ψ GS 249 : 2004 GS ISO GS ISO GS ISO GS ISO 6224 : 2005Ψ 580 : 2005Ψ 4671 : 2007Ψ 2859-1 : 1999Ψ 372 .Hoses .Under Static Conditions Rubber and Rubber Products .Hoses .All-Metal Hexagon Nuts Rubber and Rubber Products .Electrical Resistance Rubber and Rubber Products .Determination of Resistance to Vacuum Rubber and Rubber Products .Determination of Abrasion Rubber and Rubber Products .Rubber Hoses Rubber and Rubber Products .Hoses .Joint Rings for Water Supply Rubber and Rubber Products .Hoses .Resistance to Damage by Flexing Rubber and Rubber Products .Adhesion Rubber and Rubber Products .Hydrostatic Rubber and Rubber Products .Hoses .Hose.Hoses Rubber and Rubber Products .Thermoplastic Hoses Rubber and Rubber Products .Temperature Flrxibility Tests Rubber and Rubber Products .Hydraulic Impulse Test Rubber and Rubber Products .Hoses Rubber and Rubber Products .Subject Rubber and Rubber Products .Mass Per Unit Area of Coating Rubber and Rubber Products .Determination of Tear Resistance Rubber and Rubber Products .Water Suction Rubber and Rubber Products .Seals . Recommended Practice Solar Energy .Household Chemicals .Hard Water Stability Soaps and Detergents .Determination of Total AlkaGS ISO Soaps and Detergents .Household use Soaps and Detergents .Scouring Powder Soaps and Detergents .Measurement of Foaming Power Soaps and Detergents .Detergent for Hand washing.Requirement for testing Solar Energy .Surface Active Agents .Surface Active Agents .Advertising .Collectors .Calibration of a Pyranometer Solar Energy .Calcium Hardness Soaps and Detergents .Heating Systems Solar Energy .Surface Active Agents .Method of Sample Soaps and Detergents .Procedures Limiting Quality Sampling .Sodium Alkylaryl Soaps and Detergents .Test Methods Solar Energy .Surface Active Agents .Calibration of a Pyranometer Solar Energy .Surface Active Agents .Subject Sampling .3 : 1989Ψ GS ISO 9553 : 1997Ψ GS IEC 61730-2 : GS IEC 60904 .Calibration of Field Pyrheliometers Solar Energy .Skip Lot Security Management Services .Laundry Soap Soaps and Detergents .Requirements for Solar Cells GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS 131 : 2006 GS ISO GS ISO GS ISO GS ISO 9847 : 1992Ψ 9846 : 1993Ψ 9059 : 1990Ψ 9806-2 : 1995Ψ GS IEC 61829 : 1995Ψ GS ISO 9845-1 : 1992Ψ 9901 : 1990Ψ GS ISO TR GS ISO GS ISO 9459-2 : 1995Ψ 9060 : 1990Ψ GS IEC 60904-10 : 1998Ψ GS IEC 60904 .Advertising .Surface Active Agents .Guide Soaps and Detergents .Measurement Principles for Solar Devices Solar Energy .Field Pyranometers .Surface Active Agents .Measurement of Spectral Response Solar Energy .Liquid Detergent Soaps and Detergents .Crystalline Silicon Photovoltaic (PV) Array Solar Energy .Surface Active Agents .Anago Soap Soaps and Detergents .Alkane Sulphonates Standard Number GS ISO GS ISO Page 158 158 293 52 64 19 11 34 9 15 129 126 149 147 181 133 127 124 133 127 6 253 253 248 253 109 253 300 251 248 105 105 105 251 109 104 2859-2 : 1985Ψ 2859-3 : 2005Ψ GS ISO 28000 : 2007Ψ GS 847 : 2010 GS 1008 : 2011 GS 289 : 2007 GS 188 : 1998 GS 606 : 2008 GS 167 : 2006 GS 229 : 2011 GS ISO 893 : 1989Ψ 685 : 1975Ψ 2174 : 1990Ψ 2131 : 1972Ψ 4198 : 1984Ψ 1063 : 1974Ψ 696 : 1975Ψ 607 : 1980Ψ 1104 : 1977Ψ 697 : 1981Ψ Soaps and Detergents .Methods of Testing Preformed Rubber Seals and Sealing Solar Energy .Toilet Soap Solar Energy .Classification Soaps and Detergents .Surface Active Agents .Washing Powders Soaps and Detergents .Surface Active Agents .Linearity Measurement Solar Energy .Instruments for Measuring Hemispherical Solar and Direct Solar Radiation Solar Energy .Outdoor signs Services .8 : 1998Ψ GS IEC 60904 .Direct Normal and Hemispherical Solar Irradiance Solar Energy .Analysis of Soap .2 : 2007Ψ 373 .Laundry Detergents.Marketing Communication Soaps and Detergents . Chillies .Salt Mist Corrosion Testing of Photovoltaic Solar Energy .Water Heating Systems .Total Capsicinold Content Spices and Condiments .Black Pepper Spices and Condiments .Water Heaters .Cinamon Spices and Condiments .Dehydrated Garlic Spices and Condiments .Aniseed Spices and Condiments .9 : 2007Ψ GS IEC 60904 .UV Test for Photovoltaic (PCV) Modules Solar Energy .Dehydrated Green Pepper Spices and Condiments .Black Caraway Spices and Condiments .Dehydrated Garlic Spices and Condiments .7 : 1998Ψ GS IEC 61345 : 1998Ψ GS ISO 9488 : 1999Ψ GS IEC 60904 .Capsicinold Content Spices and Condiments . Sri Lankan. Seychelles and Madagascan types Spices and Condiments .Water Heating Systems .Coriander Spices and Condiments .Solar Simulator Performance Requirements Solar Energy .Degree of Fineness of Grinding Spices and Condiments .Aniseed Spices and Condiments .Chillies and Capsicums Spices and Condiments .Spectral Mismatch Solar Energy .Solar Collectors Solar Energy .Coldwater Soluble Extract Spices and Condiments .Voltage Characteristics Solar Energy .Vocabulary Solar Energy .Method of Assessment Solar Energy .Internal Corrosion Solar Energy .Dehydrated Garlic Spices and Condiments .Cardamom Spices and Condiments .Cinnamon.Subject Solar Energy .Dehydrated Green Pepper Spices and Condiments .Cloves Spices and Condiments .Dehydrated Onion Standard Number GS IEC 61701 : 1995Ψ GS ISO GS ISO Page 109 253 252 105 105 108 251 104 253 300 251 281 227 36 199 132 199 35 38 230 230 132 210 37 150 131 150 36 150 168 36 199 199 262 38 199 9806-3 : 1995Ψ 9806-1 : 1994Ψ GS IEC 60904 .Solar Collectors Solar Energy .Curry Powder Spices and Condiments .Chillies .Performance Rating Procedure Space Systems .Curry Powder Spices and Condiments .Measurement and Calibration Procedures Spices and Condiments .Black Pepper and White Pepper .Bouillon Spices and Condiments .Piperine Content Spices and Condiments .1 : 2006Ψ GS ISO 9808 : 1990Ψ GS ISO TR 10217 : 1989Ψ GS ISO 9459-1 : 1993Ψ GS ISO 15387 : 2005Ψ GS ISO 7386 : 1984Ψ GS 688 : 2003 GS ISO GS ISO GS ISO 5561 : 1990Ψ 959-1 : 1998Ψ 5564 : 1982Ψ GS 675 : 2007 GS 701 : 2003 GS ISO GS ISO GS ISO GS ISO 7543-1 : 1994Ψ 7543-2 : 1993Ψ 972 : 1997Ψ 6539 : 1997Ψ GS 691 : 2003 GS ISO GS ISO GS ISO 2254 : 2004Ψ 941 : 1980Ψ 2255 : 1996Ψ GS 689 : 2003 GS ISO GS ISO 2253 : 1999Ψ 3588 : 1977Ψ GS 687 : 2003 GS ISO GS ISO 5560 : 1997Ψ 5567 : 1982Ψ GS ISO 10621 : 1997Ψ GS 698 : 2003 GS ISO 5559 : 1995Ψ 374 . Sesame Seeds Spices and Condiments .Turmeric .Colouring Power Spices and Condiments .Refined Edible Salt Spices and Condiments .Ground Powdered Paprika .Dried Oregano Spices and Condiments .Dried Mint (Spermint) Spices and Condiments .Volatile Oil Content Spices and Condiments .Large Cardamom Spices and Condiments .Microscopic Examination Spices and Condiments .Mustard Seed Spices and Condiments .Moisture Content Spices and Condiments .Sampling Spices and Condiments . Spices and Condiments .Salts .Unrefined Edible Salt Spices and Condiments .Mustard Seed Spices and Condiments .Dried Thyme Spices and Condiments .Fennel Seed Spices and Condiments .Salt Fortified with Iodine Spices and Condiments .Dried Peppermint Spices and Condiments .Suya (Khebab) Powder Spices and Condiments .Powdered Chilli Spices and Condiments .Non-volatile Ether Extract Spices and Condiments .Ginger Spices and Condiments .Whole Black Caraway and Blond Caraway Standard Number GS 658 : 2003 GS ISO 5563 : 1984Ψ Page 35 199 38 150 234 37 216 38 130 234 132 230 230 157 262 131 136 35 133 211 267 36 132 21 8 8 8 131 61 16 53 130 199 211 37 37 GS 700 : 2003 GS ISO GS ISO 2256 : 1984Ψ 7925 : 1999Ψ GS 697 : 2003 GS ISO 6754 : 1996Ψ GS 699 : 2003 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 927 : 1982Ψ 7927-1 : 1987Ψ 1003 : 1980Ψ 7541 : 1989Ψ 7542 : 1984Ψ 2825 : 1981Ψ GS ISO 10622 : 1997Ψ GS ISO GS ISO 939 : 1980Ψ 1237 : 1981Ψ GS 682 : 2003 GS ISO GS ISO 1108 : 1992Ψ 6577 : 2002Ψ GS ISO 11162 : 2001Ψ GS 686 : 2003 GS ISO 973 : 1999Ψ GS 309 : 2002 GS 153 : 2004 GS 154 : 2006 GS 152 : 2004 GS ISO 948 : 1980Ψ GS 975 : 2009 GS 240 : 2001 GS 876 : 2009 GS ISO GS ISO GS ISO 928 : 1997Ψ 5566 : 1982Ψ 6571 : 1984Ψ GS 692 : 2003 GS 695 : 2003 375 .Peppercorns Spices and Condiments .Ground Powdered Paprika .Dried Peppermint Spices and Condiments .Nutmeg Spices and Condiments .Whole and Ground (Powdered) Cloves Spices and Condiments .Dried Mint Spices and Condiments .Ground Samples for Analysis Spices and Condiments .Subject Spices and Condiments .Dehydrated Onion Spices and Condiments .Total Ash Spices and Condiments .Pimento Allspice Spices and Condiments .Salts .Salts .Extraneous Matter Content Spices and Condiments .Peppercorns in Brine.Shito Spices and Condiments .Dried Thyme Spices and Condiments .Colouring Matter Content Spices and Condiments . Reinforcement of Concrete Structures .Determination of Chloride Content .Maize Starch Starch and Derived Products .Sulfur Dioxide Starch and Derived Products .White Pepper Spices and Condiments . Spices and Condiments . in Spices or Ground Ginger Standard Graduated Glass Standard Measures for Liquids other than Water Standardization .Cassava Starch Starch and Derived Products .Whole or Ground (Powdered) Coriander Spices and Condiments .Lead Content Starch and Derived Products .Potentiometric Method Starch and Derived Products .Ash Determination Starch and Derived Products .Dip Aluminium Steel and Steel Products .Black Pepper Spices and Condiments .Determination of Chemical Composition .Cadmium Content Starch and Derived Products .Cassava Flour Starch and Derived Products .Water Content Steel and Steel Products .Whole or Ground Dried Oregano Leaves Spices and Condiments .Cassava Starch .Subject Spices and Condiments .General Rules Starch and Derived Products .Mercury Content Starch and Derived Products .Cassava Chips Starch and Derived Products .Bars and Wires .Whole or Broken Nutmeg and Whole or Pieces Mace Spices and Condiments .Moisture Content Starch and Derived Products .Whole or Ground Pepper .Total Phosphorus Content Starch and Derived Products .Fufu Flours Starch and Derived Products .Scheme Steel and Steel Products .Reducing Power and Dextrose Equivalent Starch and Derived Products .Whole or Ground Pepper .Nitrogen Content Starch and Derived Products .Sulphated Ash Starch and Derived Products .Arsenic Content Starch and Derived Products .Industrial Starch and Derived Products .Whole.Whole Chillies and Capsicums.Nitrogen Content Starch and Derived Products .Continuous Hot .Starch Starch and Derived Products .Samples Standard Number GS 693 : 2003 GS 690 : 2003 GS 694 : 2003 GS 696 : 2003 GS 683-1 : 2003 GS 683-2 : 2003 GS 684 : 2003 GS OIML R GS OIML R 43 : 120 : 1996 Page 37 36 37 37 35 36 36 323 323 302 267 168 267 19 46 35 33 202 175 53 15 267 17 267 142 195 163 195 261 195 202 174 195 256 250 278 GS ISO/IEC GUIDE 41 : GS ISO 11212-1 : GS ISO 3593 : 1981 GS ISO 11212-4 : GS 300 : 2008 GS 762 : 2008 GS 676 : 2004 GS 584 : 2003 GS ISO GS ISO 5810 : 1982Ψ 3947 : 1977Ψ GS 868 : 2008 GS 237 : 2003 GS ISO 11212-3 : GS 256 : 2003 GS ISO 11212-2 : GS ISO GS ISO GS ISO GS ISO 1666 : 1996Ψ 5378 : 1978Ψ 3188 : 1978Ψ 5377 : 1981Ψ GS ISO 10504 : 1998Ψ GS ISO GS ISO GS ISO GS ISO 5379 : 1983Ψ 5809 : 1982Ψ 3946 : 1982Ψ 5381 : 1983Ψ GS ISO 10144 : 1991Ψ GS ISO 9364 : 2006Ψ GS ISO 14284 : 1996Ψ 376 .Gari Starch and Derived Products .Determination of Total Fat Starch and Derived Products . Dip Zinc .Hot.Determination of Loss in Mass Standard Number GS ISO 16162 : 2005Ψ GS ISO 16163 : 2005Ψ GS ISO 16160 : 2005Ψ GS ISO GS ISO 404 : 1992Ψ 4998 : 2005Ψ Page 284 285 284 121 191 11 261 299 284 261 239 239 250 219 219 233 190 246 286 254 284 216 180 180 180 143 143 143 68 74 52 171 140 140 216 140 GS 190 : 1998 GS ISO 10474 : 1991Ψ GS ISO TR 9769 : 1991Ψ GS ISO 15630-1 : GS ISO 10544 : 1992Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 8458-1 : 2002Ψ 8458-2 : 2002Ψ 9442 : 1988Ψ 6931-2 : 2005Ψ 6931-1 : 1994 7900 : 2006Ψ 4949 : 2003Ψ GS ISO TS GS ISO 8794 : 1986Ψ GS ISO 17558 : 2006Ψ GS ISO 9975 : 1990Ψ GS ISO 16020 : 2005Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 6761 : 1981Ψ 4156-2 : 2005Ψ 4156-1 : 2005Ψ 4156-3 : 2005Ψ 1741 : 1980Ψ 1743 : 1982Ψ 1742 : 1980Ψ GS CODEX STAN 12 : GS CODEX STAN 212 : GS 856 : 2007 GS ISO GS ISO GS ISO GS ISO GS ISO 3720 : 1986Ψ 1577 : 1987Ψ 1578 : 1975Ψ 6770 : 1982Ψ 1573 : 1980Ψ 377 .Stainless Steels .Hot Rolled Steel Bars Steel and Steel Products .Black Tea .Socketing Procedures Steel and Steel Products .Inspection Documents Steel and Steel Products .General Technical Requirements Steel and Steel Products .Glucose Syrup Dry Matter Content Sugar and Sugar Products .Sugar Sugar and Sugar Products .Dimensional and Shape Tolerances .Spring Steel and Steel Products .Requirements Tea .Steel Wire Ropes .Determination of Acid Tea .Stainless Steels .Steel Wire .Flow and Compacted Bulk Densities Tea .Steel Wires Steel and Steel Products .Dextrose Sugar and Sugar Products .Determination of Alkalinity Tea .Reinforcement of Bars.Methods of Analysis Steel and Steel Products .Generalities Straight Cyclindrical Involute Splines .Steel Barbed Wire Steel and Steel Products .Vocabulary Steel and Steel Products .Toffees Tea .Narrow strip Steel and Steel Products .Coated Carbon Steel and Steel Products .Reinforcement of Concrete-Cold-Reduced Steel Steel and Steel Products . wire Rod and Wire Steel and Steel Products .Dipped Steel and Steel Products .Hot .Letter Symbols Steel and Steel Products .Spring Steels Steel and Steel Products .Dimensional and Shape Tolerances .Dimensions Straight Cyclindrical Involute Splines .Welding .Steel Tubes Straight Cyclindrical Involute Splines .Wire Ropes Steel and Steel Products .Glucose Syrups Sugar and Sugar Products .Steel Names .Inspection Sugar and Sugar Products .Cold Rolled Steel and Steel Products .Dimensional and Shape Tolerances .Honey Sugar and Sugar Products .Subject Steel and Steel Products .Spring Steels Steel and Steel Products .Determination of Free .Spring Steels Steel and Steel Products .Hot Rolled Steel and Steel Products . Symbols for Geometrical .Vocabulary and Indications Telecommunication .Sensory Tests Tea .Protection Against Interference . 54 : 2004Ψ Telecommunication .Rolling Bearings .Isometric Technical Drawings .Spline and Serrations Technical Drawings .Fundamental Principle Technical Drawings .Level GS ITU-T K. 59 : 2003Ψ GS ITU-T K.Geometrical Tolerancing Technical Drawings .Overvoltage and Overcurrent GS ITU-T K.Axonometric Technical Drawings .Proportions and Dimensions Technical Drawings .Protection Against Interference .Preparation of Ground Sample .General Technical Drawings .EMC Requirements -Telecommunication GS ITU-T K. 48 : 2006Ψ Telecommunication .Sampling Tea .Protection Against Interference .Subject Tea . 57 : 2003Ψ Telecommunication . Resistibility and Safety Telecommunication .Dry Matter Content Tea .Vocabulary Technical Drawings .Conducted Immunity Test Method .Linear and Angular Dimensions Technical Drawings . 58 : 2008Ψ GS ITU-T K.Detailed Technical Drawings . Resistibility and Safety Telecommunication .General Principles of Presentation Technical Drawings .Specification Technical Drawings .Seals for Dynamic Application .EMC.EMC.Seals for Dynamic Application .Determination of Water Extract Tea .Determination of Water Tea .Projection Technical Drawings .Orthographic Technical Drawings .Radio Base Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 1575 : 1987Ψ 1576 : 1988Ψ 9768 : 1994Ψ 1572 : 1980Ψ 3103 : 1980Ψ 1839 : 1980Ψ Page 140 140 252 140 163 144 33 196 196 161 142 235 117 117 155 162 208 163 162 121 196 208 246 249 249 208 222 148 276 317 317 317 316 316 316 316 GS 572 : 2007 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 5456-4 : 1996Ψ 5456-3 : 1996Ψ 3040 : 1990Ψ 1660 : 1987Ψ 8015 : 1985Ψ 129-1 : 2004Ψ 128-20 : 1996Ψ 2692 : 1988Ψ 3098-3 : 2000Ψ 6412-2 : 1989Ψ 3098-4 : 2000Ψ 3098-2 : 2000Ψ 406 : 1987Ψ 5456-2 : 1996Ψ 6412-1 : 1989Ψ 8826-1 : 1989Ψ 9222-2 : 1989Ψ 9222-1 : 1989Ψ 6413 : 1988Ψ 7083 : 1983Ψ 2162-3 : 1993Ψ GS ISO 13715 : 2000Ψ GS ITU-T K.Preparation of Liquor .Dimensioning and Tolerancing Technical Drawings .Cones Technical Drawings .Protection Against Interference .Greek Alphabet Technical Drawings .Latin Alphabet Technical Drawings .Protection Against Interference .Pipelines Technical Drawings .Lettering Technical Drawings .General Principles Technical Drawings .Determination of Total Ash Tea .Protection Against Interference .Protection Against Interference .Guidance on Complying with Limits for Telecommunication .Representation Technical Drawings . 55 : 2002Ψ 378 .Protection Measures . 52 : 2004Ψ GS ITU-T K. Infrastructure of Audiovisual GS ITU-T H.Infrastructure of Audiovisual Telecommunication .Supplementary Services for Telecommunication .Audiovisual and Multimedia Systems .Protection of Radio Based Stations Standard Number GS ITU-T K.Test Requirements and Performance GS ITU-T K.SUP. 235-5 : Telecommunication .Audiovisual and Multimedia Systems .Audiovisual and Multimedia Systems .Protection of Telecommunication Lines - GS ITU-T K.Infrastructure of Audiovisual Telecommunication .Infrastructure of Audiovisual Telecommunication .Audiovisual and Multimedia Systems .IPTV Multimedia Services and Telecommunication . 235-8 : GS ITU-T H.Protection Against Interference .Non-Telephone Telecommunication .Audiovisual and Multimedia Systems . 5 : GS ITU-T H. 235-4 : GS ITU-T H. 50 : 2000Ψ Telecommunication . 235-6 : GS ITU-T H. 235-2 : GS ITU-T H.Audiovisual and Multimedia Systems .ITU-T H.SUP.Supplementary Services . 140 : GS ITU-T H. 2 : Telecommunication . 1 : Telecommunication . 701 : Telecommunication .Infrastructure of Audiovisual Telecommunication .X Sub-Series Packages GS ITU-T H.Infrastructure of Audiovisual Telecommunication .Audiovisual and Multimedia Systems . 235-3 : GS ITU-T H.Primary Digital Group GS ITU-T H.GS ITU-T H.248.Supplementary Services for GS ITU-T H.Audiovisual and Multimedia Systems .Audiovisual and Multimedia Systems .Supplementary Services for Telecommunication . 760 : GS ITU-T H.Infrastructure of Audiovisual Telecommunication .Repository of Generic Parameters GS ITU-T H.Protection Against Interference . 530 : GS ITU-T H.IPTV Multimedia Services and Telecommunication .Infrastructure of Audiovisual Telecommunication . 56 : 2010Ψ Page 317 316 316 316 316 311 311 311 311 311 306 312 312 308 308 307 308 307 307 307 30 307 308 307 307 312 307 311 312 306 312 310 310 310 310 Telecommunication .Audiovisual and Multimedia Systems . 460-2 : GS ITU-T H.Audiovisual and Multimedia systems .Audiovisual and Multimedia Systems .Gateway Control Protocol Telecommunication . 450-9 : GS ITU-T H.Audiovisual and Multimedia Systems .IPTV Services and Applications .Infrastructure of Audiovisual Telecommunication . 450-10 : 379 . 720 : 2008 GS ITU-T H.Multimedia Application Telecommunication . 740 : 2011 GS ITU-T H. 450-11 : GS ITU-T H.Audiovisual and Multimedia systems .SUP.Audiovisual and Multimedia Systems .Audiovisual and Multimedia Systems . 3 : GS ITU-T H. 49 : 2009Ψ Telecommunication .Audiovisual and Multimedia Systems .Infrastructure of Audiovisual Telecommunication .Audiiovisual and Multimedia Systems .Audiovisual and Multimedia Systems .Protection Against Interference .Audiovisual and Multimedia Systems . 235-9 : GS ITU-T H. 323 : GS ITU-T H.Audiovisual and Multimedia Systems .Audiovisual and Multimedia Systems . 235-1 : GS ITU-T H.Safe Limits .Protection Against Interference .Application Profile .Audiovisual and Multimedia Systems .Audiovisual and Multimedia Systems . 721 : 2010 GS ITU-T H.Safety Criteria -Telecommunication GS ITU-T K.Infrastructure of Audiovisual Telecommunication . 324 : GS ITU-T H.Line Transmission . 51 : 2009Ψ Telecommunication .IPTV Services and Applications GS ITU-T H. 120 : Telecommunication . 235-7 : GS ITU-T H.Sign language Telecommunication .Audiovisual and Multimedia Systems .Operator Requirements for FullTelecommunication .Operating Voltages and GS ITU-T K.SUP.Mobility and Collaboration GS ITU-T H.Audiovisual and Multimedia Systems .Infrastructure of Audiovisual Telecommunication . 4 : Telecommunication .Audiovisual and Multimedia Systems .Services and Applications for Telecommunication .Audiovisual and Multimedia Systems .Number Telecommunication . 235-0 : GS ITU-T H.Protection Against Interference .Subject Telecommunication .Audiovisual and Multimedia Systems . 721 : Telecommunication . 47 : 2008Ψ Telecommunication .SUP.Audiovisual and Multimedia Systems . 100 : Page 310 310 309 309 309 309 310 310 309 306 306 321 303 304 303 305 304 305 303 303 303 304 306 306 305 304 303 304 304 320 317 317 315 314 314 319 GS ITU-T L. 27 : 1996Ψ Telecommunication .Overall Network Operation.Maritime and Public Land Telecommunication . Telephone Service .Overall Network Operation.Supplementary Services for Telecommunication . 504 : GS ITU-T E. Telephone Service . Telephone Service . Telephone Service .Audiovisual and Multimedia Systems .Protection Against Interference . Telephone Service .Cables . 212 : Telecommunication .International Routing Standard Number GS ITU-T H. 490-1 : Telecommunication .Audiovisual and Multimedia Systems .Emission Levels and Test Methods Telecommunication .Overall Network Operation.Network Management and GS ITU-T E. 350 : GS ITU-T E. 505 : GS ITU-T E.Audiovisual and Multimedia Systems Line Transmission of Non Telecommunication .Construction Installation and Protection of Cables and other Element s of Telecommunication . 503 : Telecommunication . 450-7 : GS ITU-T H. GS ITU-T E.Telephone Network and Telecommunication .Supplementary Services for Telecommunication .Overall Network Operation.Overall Network Operation. 82 : 2010Ψ Telecommunication . 501 : Telecommunication .Supplementary Services for Telecommunication .Telephone Network and Telecommunication .Overall Network Operation. 360-4 : GS ITU-T E. 492 : GS ITU-T E.Protection Against Interference . Telephone Service . Telephone Service . 450-8 : GS ITU-T H.Overall Network Operation.Protection Against Interference . Telephone Service .Bonding Configurations and Earthing at Telecommunication . Telephone Service .Overall Network Operation. 450-1 : GS ITU-T H. Telephone Service .Audiovisual and Multimedia Systems Line Transmission of Non Telecommunication .Solid -State. 490 : Telecommunication .Supplementary Services for Telecommunication . Telephone Service .Overall Network Operation.Telecommunications Centres GS ITU-T K.Supplementary Services for Telecommunication . GS ITU-T K.Emission Levels and Test Methods GS ITU-T K.Supplementary Services for Telecommunication . 40 : 1996Ψ Telecommunication . 507 : GS ITU-T E.Protection Against Interference .Overall Network Operation.Overall Network Operation.Audiovisual and Multimedia Systems .Overall Network Operation. 330 : GS ITU-T E.Protection Against Interference .GS ITU-T K.Audiovisual and Multimedia Systems .Overall Network Operation. Telephone Service . 73 : 2008Ψ 380 .Operation. 35 : 1996Ψ GS ITU-T K. 110 : GS ITU-T H. 1000 : 2011 GS ITU-T E.Overall Network Operation. 500 : Telecommunication . Numbering.Supplementary Services for Telecommunication .Audiovisual and Multimedia Systems .Audiovisual and Multimedia Systems .Supplementary Services for Telecommunication .Telephone Network and Telecommunication . Telephone Service -Telephone Network and GS ITU-T E. 360-2 : GS ITU-T E.Audiovisual and Multimedia Systems . 352 : Telecommunication .Characteristics and Ratings .Telephone Network and Telecommunication . Telephone Service .Supplementary Services for Telecommunication .Protection Against Interference . 450-12 : GS ITU-T H.Lemp .Subject Telecommunication .Bonding Configurations and Earthing . 450-6 : GS ITU-T H. Telephone Service . Telephone Service .Audiovisual and Multimedia Systems . Telecommunication .International Routing Telecommunication .Traffic Engineering GS ITU-T E.Overall Network Operation.Operation Numbering.Telephone Network and Telecommunication . 60 : 2008Ψ GS ITU-T K.Overall Network Operation.Protection Against Interference . Telephone Service . 450-2 : GS ITU-T H. 60 : 2009 Telecommunication .Audiovisual and Multimedia Systems . GS ITU-T E. 450-3 : GS ITU-T H. 351 : Telecommunication .Network Management and GS ITU-T E.Shielding and Bonding GS ITU-T K. 493 : GS ITU-T E.Overall Network Operation. 450-5 : GS ITU-T H.Network Management and GS ITU-T E. 450-4 : GS ITU-T H.Telephone Network and Telecommunication .Operation Numbering. Equipment Exposed Telecommunication .Protection Against Interference .Protection Against Interference . 77 : 2009Ψ GS ITU-T K.Protection Against Interference .Unbalance Telecommunication .Protective Devices GS ITU-T K.Low and High Frequency Emc Mitigation Telecommunication .Resistibility GS ITU-T K.Lines using Metallic Conductors Against Telecommunication .Customer Premises form Overvoltages GS ITU-T K.Selection .Telecommunication Telecommunication . 67 : 2006Ψ GS ITU-T K. 61 : 2008Ψ GS ITU-T K.Low Frequency Interference . 45 : 2008Ψ GS ITU-T K.Protection of Telecommunication . 77 : 2011 GS ITU-T K. 34 : 2003Ψ Telecommunication .Protection Against Interference . GS ITU-T K. 44 : 2008Ψ GS ITU-T K.Limit Human Telecommunication .Protection Against Interference .Expected Surges on Telecommunications Telecommunication .Electromagnetic .Induced Voltages in Cables with Plastic Telecommunication .Protection Against Interference .Resistibility Tests . 69 : 2006Ψ GS ITU-T K.Outside Telecommunication .EMC Requirements . 46 : 2008Ψ 381 .Guidance . GS ITU-T K. 62 : 2004Ψ GS ITU-T K. 75 : 2008Ψ Telecommunication .Risk Assessment .Safe Working Practices .Protection Against Interference .Protection Against Interference .Protection Against Interference . 68 : 2008Ψ GS ITU-T K.Protection Against Interference .Protection Against Interference .Protection Against Interference .Protection of Telecommunication . 76 : 2008Ψ GS ITU-T K. 81 : 2009Ψ GS ITU-T K.Subject Standard Number Page 319 314 318 320 320 320 319 313 318 317 320 313 312 313 319 314 313 318 319 318 320 320 319 318 312 313 315 315 315 315 318 314 314 Telecommunication .Metal Oxide Varistors .Precautions at Crossings Telecommunication . 65 : 2011Ψ GS ITU-T K.Resistibility . 19 : 1993Ψ GS ITU-T K. 66 : 2011Ψ Telecommunication .Protection Against Interference .Protection Against Interference .Protection Against Interference .Semi-Conductor Arrester Assemblies .Protection Against Interference .Mitigation Techniques . 10 : 1997Ψ GS ITU-T K.EMC.Electromagnetic .Telecommunication Lines using Metallic GS ITU-T K. 70 : 2007Ψ GS ITU-T K.Maintaining Telecommunications Telecommunication . Resistibility and Safety GS ITU-T K. 79 : 2009Ψ Telecommunication .Lightning Discharges Telecommunication .Power Electromagnetic Immunity Telecommunication .Protection Against Interference .Protection Against Acoustic Shock Telecommunication .Protection Against Interference .Electromagnetic GS ITU-T K.Metal Oxide Varistors .Separation -Telecommunication Cables Telecommunication .Measurement and Numerical Telecommunication .Protection Against Interference .Joint use of Trenches and Tunnels for Telecommunication .Pulse Immunity Guide Telecommunication . 38 : 1996Ψ GS ITU-T K.Protection Against Interference .Protection Against Interference . 13 : 1993Ψ 5 : 1993Ψ GS ITU-T K.System Level Radiated Emissions Telecommunication .Joint use of Poles for Electricity Telecommunication .Claasification of Interface .Protection Against Interference .Protection Against Interference .Protection Against Interference . 36 : 1996Ψ Telecommunication .Protection Against Interference .Protection Against Interference .Radiated Environment GS ITU-T K.Classification . 28 : 1994Ψ Telecommunication . 74 : 2008Ψ Telecommunication . 6 : 1993Ψ 7 : 1993Ψ GS ITU-T K.Overvoltage and Overcurrent Telecommunication . 39 : 1996Ψ Telecommunication .High .Equipment Installed in Customer Premises GS ITU-T K.Protection Against Interference . 37 : 1999Ψ GS ITU-T K. 21 : 2008Ψ Telecommunication .Protection Against Interference . 72 : 2008Ψ GS ITU-T K.GS ITU-T K.Protection Against Interference .Equipment Installed in the Telecommunication .Protection Against Interference . 78 : 2009Ψ GS ITU-T K.Protection Against Interference . 8 : 1993Ψ 313 318 315 GS ITU-T K.Protection Against Interference .Radiated Emission Test Procedure GS ITU-T K.Protection Against Interference .Protection Against Interference . 64 : 2011Ψ GS ITU-T K.Management of Electromagnetic Telecommunication .Protection Against Interference . 63 : 2004Ψ GS ITU-T K.Protection Against Interference .Maintenance of Protective Measures Telecommunication . Terminals and Subjective and Objective Assessment Methods .Environmental Testing Testing .Telephone Transmission Quality. 330 : Telecommunication .International Testing .Measuring GS ITU-T P.Speech Loudness Telecommunication .Automotive Upholstery Fabrics Textiles .Terminals and Subjective and Objective Assessment Methods .Colour Fastness .Determination of Bursting Strength and Bursting Distention Textiles .Insulating Materials Testing .Designation of Yarns Textiles . Local line Telecommunication .Hot Pressing Textiles .Head and Torso GS ITU-T P. 313 : GS ITU-T P.Carpets .Sieves Textiles .Protection Against Interference -Customer Antenna Installations Standard Number GS ITU-T K. 71 : 2007Ψ Page 319 321 321 322 321 322 322 56 : 2011 321 321 322 306 88 88 89 123 116 289 22 22 49 190 116 116 6 117 116 6 117 8 134 3 162 2 Telecommunication . Local Line Telecommunication .Azo Colorants Textiles . 130 : GS IEC 60068-2-32 : GS IEC 60068-2-32 : GS IEC 60112 : 2003Ψ GS ISO GS ISO 565 : 1990Ψ 105-E07 : GS ISO 20645 : 2004Ψ GS 331 : 2008 GS 330 : 2008 GS 804-1 : 2005 GS ISO GS ISO GS ISO 4919 : 1978Ψ 105-B01 : 105-D01 : GS 125 : 1989 GS ISO GS ISO 105-X11 : 105-E04 : GS 126 : 2005 GS ISO 105-E01 : GS 160 : 2005 GS ISO GS 1139 : 1973Ψ 87 : 1991 3071 : 2005Ψ GS ISO GS 79 : 1990 382 .Terminals and Subjective and Objective Assessment Methods .Subject Telecommunication .Voice Telecommunications. 805 : GS ITU-T P. Telephone Installations. 310 : GS ITU-T P.Measurements .Tuft Withdrawal Force Textiles .Measuring Apparatus .Telephone Transmission Quality. Telecommunication .Gray Scale Textiles .Determination -pH-Aqueous Extract Textiles . Telephone Installations.Determining Colour Fastness to Rubbing GS ITU-T P.Voice Telecommunication .Audiovisual and Multimedia Systems . Telephone Installations. Telecommunication .Frame Structures .Telephone Transmission Quality . 58 : 1996 76 : 1993Ψ GS ITU-T P.Colour Fastness Textiles .Colour Fastness .Colour Fastness . Local line GS ITU-T P.Spotting Water Textiles .Automotive Carpeting Textiles .Colour Fastness to Washing Textiles .Telephone Transmission Quality.Telephone Transmission Quality.Colour Fastness to Water Textiles . Local line Telecommunication .Cotton Tye and Dye Fabric Textiles . 79 : 2007Ψ GS ITU-T P. 311 : GS ITU-T H.Antibacterial Activity Textiles . Telephone Installations.Dry Cleaning Textiles .Colour Fastness .Colour Fastness to Perspiration Textiles .Environmental Testing Testing .Telephone Transmission Quality. Fabrics Induced by Cold-Water Immersion Textiles .Size designation .Testing Standard Number GS ISO 22198 : 2006Ψ GS 970 : 2009 GS ISO GS ISO 7771 : 1985Ψ 8559 : 1989 Page 291 61 232 241 61 8 5 160 56 172 149 174 174 1 51 185 169 169 169 169 185 185 300 300 31 227 116 224 277 GS 972 : 2009 GS 163 : 2005 GS 122 : 2005 GS ISO 2947 : 1973Ψ GS 927 : 2007 GS ISO GS ISO GS ISO GS ISO GS 3758 : 2005Ψ 2060 : 1994Ψ 3933 : 1976Ψ 3932 : 1976Ψ 31 : 2008 GS 821 : 2008 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 4417 : 1977Ψ 3636 : 1977Ψ 3637 : 1977Ψ 3638 : 1977Ψ 3635 : 1981Ψ 4415 : 1981Ψ 4416 : 1981Ψ GS ISO TR 10652 : 1991Ψ GS ISO TR 10652 : 1991 GS 494 : 2008 GS ISO 13937-3 : GS ISO GS ISO 105-D02 : 7211-2 : 1984Ψ GS ISO 13934-1 : 383 .Fabrics .Labelling-Symbols Textiles .Body Dimensions Textiles .Gray Cotton Fabric (Gray Baft) Textiles .Size designation.Tarpaulins Textiles .Standard Sizing Systems Textiles .designation measurement procedure Textiles .Subject Textiles .Men's Shirts Textiles .Fabrics .women's and girl's underwear.Standard Sizing .Clothes Textiles .Size designation .Shirts and Uniforms Textiles .Headwear Textiles .Linear Density by the Skein Method Textiles .Measurement of Width Textiles .Rounded Values Textiles .Size designation.Integrated Conversion Table .Determination of Width and Length Textiles .Garment Producers . nightwear and shirts Textiles .Jute Bags Textiles .Size designation. foundation garment and shirts Textiles .Size .Handmade Batik Fabric Textiles .Men's and Boy's Garment Textiles .men's and boy's underwear.Sewing Threads Textiles .Measurement of Length Textiles .Garment Construction.Test for Colour Fastness Textiles .Women's and Girl's Garments Textiles .Size.Infant Garments Textiles .Code Textiles .Tear Properties of Fabrics Textiles .Testing Textiles . Training -Requirement. Trousers.Culturable Micro-organisms Water Quality .Recreational Divers.Recreational Divers.Training -Requirement.Supervise Diver Tourism .Requirement .Services .Woven Fabrics Textiles .Drinking Water Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 5077 : 2007Ψ 139 : 2005Ψ 105-X12 : 105-A03 105-A02 : 105-A01 : Page 191 118 117 116 116 116 55 6 113 134 207 173 61 239 219 55 292 292 293 293 292 293 56 56 60 60 55 26 205 250 209 233 221 292 9 GS 907 : 2008 GS 124 : 2005 GS ISO GS ISO GS ISO GS ISO 2 : 1973Ψ 1144 : 1973Ψ 6356 : 2000Ψ 3801 : 1977Ψ GS 971 : 2009 GS ISO GS ISO 8498 : 1990Ψ 6939 : 1988Ψ GS 909 : 2009 GS ISO 24801-1 : GS ISO 24801-3 : GS ISO 24802-1 : GS ISO 24802-2 : GS ISO 24801-2 : GS ISO 24803 : 2007Ψ GS 919-1 : 2008 GS 919-2 : 2008 GS 965-1 : 2009 GS 965-2 : 2009 GS 906 : 2006 GS 362 : 2001 GS ISO GS ISO GS ISO GS ISO GS ISO 6222 : 1999Ψ 9308-2 : 1990 6461-1 : 1986Ψ 7888 : 1985Ψ 7027 : 1999Ψ GS ISO 24510 : 2007Ψ GS 175-1 : 2009 384 .Testing Textiles .Recreational Divers.Grading .Recreational Divers .Air Conditioners Water Quality .Grading Informal Catering Establishment Tourism .Bedding Tourism .Drinking and WasteWater Services .Services .Yarn Packages Textiles -Treated and Untreated Mosquito Nets .Vocabulary Textiles .Determination of Turbidity Water Quality .Universal Systems .Twist in Yarns Textiles .Training -Requirement.Guidelines for Assessment Water Quality .Recreational Scuba Diving Service Providers Tourism .Limited Service Hotels Tourism .Tickings Textiles .Detection of Spores (Clostridia) Water Quality .Subject Textiles .Testing Principles Textiles .Testing Textiles .Services .Leader Tourism .Services . Jackets and Skirts Textiles .Woven Fabrics .Level 1 Tourism .Recreational Divers.Suits .Grading Formal Catering Establishment Tourism .Training -Requirement-Autonomous diver Tourism .Full service Hotels Tourism .Terminology Ventilators .Testing Colour Fastness Textiles .Training .Woven Fabrics .Determination of Electrical Conductivity Water Quality .Grading .Walking Test Textiles .Testing Textiles .Level 2 Tourism .Detection and Enumeration of Coliform Water Quality .Linear Density Textiles .Traditional African Prints Textiles .Testing Colour Fastness Textiles .Services . Projections for Resistance Welding .Sampling Water Quality .Microbiological Analysis.Fusion .Metallic Materials .Portable Water .Consumables .Metallic Materials .Joints and Welds Welding .Steels Welding .Welded Joints Welding .Welding Operators Welding .Electrodes Welding .Cooling Tubes Welding .Welded Joints Welding .Nonconsumable Tungsten Electrodes Welding .Determination of Hydrogen Content Welding .Sampling -Treatment Works and Piped Distribution Systems Welding Welding Welding .Sampling Water Quality . Labelling and Packaging Welding .Sampling Programmes and Techniques Water Quality .Soldering .Metallic Materials .Colour Water Quality .Subject Water Quality .Sampling .Scheme Welding .Fusion .Procedures Welding .Metallic Materials .Metallic Materials .Metallic Materials .Metallic Materials Welding .Sampling .Lakes.Rivers and Streams Water Quality .Joints and Welds Welding . Natural and Man-Made Water Quality .Fusion .Code of Hygienic Practice Water Quality .Welds Welding .Metal Pad Welding .Transverse Tensile Test Welding .Natural Mineral Water Water Quality .Classification.Reinforcement of Concrete Structures .Welded Fabric .Brazing and Soldering Welding .Metallic Materials .Welded Joints Welding .Welding and Allied Processes Standard Number GS ISO 7887 : 1994Ψ Page 233 287 13 47 200 200 200 200 200 168 168 192 171 217 250 171 193 252 237 219 192 202 286 286 283 179 280 287 217 236 250 264 179 GS ISO 19458 : 2006Ψ GS 220 : 2005 GS 786 : 2005 GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 5667-3 : 2003Ψ 5667-4 : 1987Ψ 5667-6 : 2005Ψ 5667-1 : 2006Ψ 5667-5 : 2006Ψ 3580 : 2004Ψ 3581 : 2003Ψ 5183-2 : 2000Ψ 3677 : 1992Ψ 6847 : 2000Ψ 9313 : 1989Ψ 3690 : 2000Ψ 5184 : 1979Ψ 9606-1 : 1994 8249 : 2000Ψ 6947 : 1990Ψ 5178 : 2001Ψ 5817 : 2003Ψ GS ISO 17636 : 2003Ψ GS ISO 17637 : 2003Ψ GS ISO 15614-1 : GS ISO 4136 : 2001Ψ GS ISO 14732 : 1998Ψ GS ISO 17639 : 2003Ψ GS ISO GS ISO GS ISO 6848 : 2004Ψ 8167 : 1989Ψ 9454-1 : 1990Ψ GS ISO 11082 : 1992Ψ GS ISO 4063 : 1998Ψ 385 .Adaptors Welding .Fusion .Examination and Determination . Plywood .Overhead Power and Telecommunication Lines Wood and Wood Products .Bedsteads Wood and Wood Products .Steels Welding Equipment .Knock-Down and Semi-Assembled Furniture Wood and Wood Products .Cables Welding Equipment .Gas Welding .Destructive Tests Welding Equipment .Bond Quality Wood and Wood Products .Furniture .Electrode Welding Equipment .Seating Wood and Wood Products .Gauges Welding Equipment .Rubber Hoses Welding Equipment .Transformers Wood and Wood Products .Vocabulary Welding .Plywood .Vocabulary Wood and Wood Products .Adaptors Welding Equipment .Quality Control Standard Number GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO Page 129 165 248 250 238 238 238 236 234 226 226 192 251 203 203 192 203 203 192 173 202 129 124 202 62 62 61 62 7 11 6 62 270 12 147 7 857-1 : 1998Ψ 3253 : 1998Ψ 9090 : 1989Ψ 9312 : 1990Ψ 8430-3 : 1988Ψ 8430-2 : 1988Ψ 8430-1 : 1988Ψ 8207 : 1996Ψ 7931 : 1985Ψ 7291 : 1999Ψ 7289 : 1996Ψ 5183-1 : 1998 9539 : 1988Ψ 5829 : 1984Ψ 5828 : 2001Ψ 5173 : 2000Ψ 5827 : 1983Ψ 5830 : 1984Ψ 5175 : 1987Ψ 3821 : 2008Ψ 5822 : 1988Ψ 865 : 1981Ψ 636 : 2004Ψ 5826 : 1999Ψ GS 982 : 2009 GS 981 : 2009 GS 980 : 2009 GS 983 : 2009 GS 146-2 : 2007 GS 196 : 1996 GS 145-1 : 2007 GS 984 : 2009 GS ISO 12466-1 : GS 198 : 2011 GS ISO 2074 : 2007Ψ GS 146-1 : 2007 386 .Gas Welding Welding Equipment .Welding and Allied processes .Furniture .Projectors Welding Equipment .Electrode Caps Welding Equipment .Plywood .Table Wood and Wood Products .Gas Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment Welding Equipment .Welding Consumables .Inspection Wood and Wood Products .Furniture Components Wood and Wood Products .General Wood and Wood Products .Subject Welding .Planed Timber and Mouldings Wood and Wood Products .Furniture . Windows and Standard Number GS 145-3 : 2008 GS 145-2 : 2008 GS 197 : 2003(2008) GS 194 : 2003(2008) Page 7 7 11 11 387 .Wood Technology .Wood Poles .Subject Wood and Wood Products .Eucalyptus Poles Wood and Wood Products .Wooden Doors Wood and Wood Products .Wood Poles .Pine Poles Wood and Wood Products .Timber and Sawn Logs .Wood Technology .Timber and Sawn Logs .Wooden Frames for Doors. NUMERICAL ICS INDEX . 20 01. 67.040 01.040.ICS 01.40 01. 03.040.040.100.23 01.77 .040.040.040.040.040. 39.020.23 01.220.040.040.40 Standard Number GS ISO 2162-3 : 1993Ψ GS ISO 13715 : 2000Ψ GS ISO 9000 : 2005Ψ GS 906 : 2006 GS ISO 1942-2: 1989Ψ GS ISO 1942-4: 1989Ψ GS ISO 1942-1: 1989Ψ GS ISO 14050 : 2002Ψ GS ISO 1132-1: 2000Ψ GS ISO 5408 : 1983Ψ GS ISO 4378-1: 1997Ψ GS ISO 6811 : 1998Ψ GS ISO 11321-1 : 2000Ψ GS ISO 1925 : 2001Ψ GS ISO 1122-1: 1998Ψ GS ISO 5288 : 2001Ψ GS ISO 3857-1 : 1977Ψ GS ISO 3857-2 : 1977Ψ GS ISO 6552 : 1980Ψ GS ISO 7583 : 1986Ψ GS ISO 4063 : 1998Ψ GS ISO 9488 : 1999Ψ GS ISO TR 11211 : GS ISO 3509 : 2005Ψ GS ISO 16020 : 2005Ψ GS ISO 4885 : 1996Ψ GS ISO 472 : 1999Ψ Page 139 265 243 60 136 136 136 267 124 189 176 211 261 136 124 187 166 166 204 225 172 246 275 159 269 183 112 263 123 105 220 244 GS ISO 13006 : 1998Ψ GS ISO 1000 : 1992Ψ GS ISO 31-0 : 1992Ψ GS ISO 7287 : 2002Ψ GS ISO 9128 : 2006Ψ 388 .10 01.040.11 01. 21.080. 91.080.01 01.040.100. 13.040.91.040.83.080. 01.200 01. 21.25 01.10 01. 21. 77.10 01.77.040.23 01.080.10 01.040.060 01.040.21.13.100.15 01.11 01.040.21.040.14. 21. 21.11 01.040.100.040.040.01.040.21.20 01.20 01.21 01.21.25 01.040.120.21.060 01.040.30 01.040.03.03 .21 01. 77. 43.39.20 01.040.20 01.21.060 01.120.040.100.10 01.27 .20 .140.67 .080. 83.20 01.03. 27160 01. 21. 100.20 01.30 01.20 .20 01.20 01.140 01.30 01.50 01.080.100.100.100.20 01.080.080.20 01. 17.20 01.30 01.080.27.100.20 01.01 Standard Number GS ISO 8999 : 2001Ψ GS ISO 5784-2 : 1989Ψ GS ISO 5784-1 : 1988Ψ GS ISO 3952-3 : 1979Ψ GS ISO 952-4 : 1984Ψ Page 242 195 195 168 122 196 168 168 117 241 108 154 154 154 108 189 190 189 133 190 251 146 230 217 153 241 202 111 145 245 124 127 202 GS ISO 5784-3 : 1989Ψ GS ISO 3952-4 : 1984Ψ GS ISO 3952-2 : 1981Ψ GS ISO 701 : 1998Ψ GS ISO 8790 : 1987Ψ GS ISO 129-1 : 2004Ψ GS ISO 3098-2 : 2000Ψ GS ISO 3098-3 : 2000Ψ GS ISO 3098-4 : 2000Ψ GS ISO 128-20 : 1996Ψ GS ISO 5456-2 : 1996Ψ GS ISO 5456-4 : 1996Ψ GS ISO 5456-3 : 1996Ψ GS ISO 1660 : 1987Ψ GS ISO 5458 : 1998Ψ GS ISO 10110-10 : GS ISO 2692 : 1988Ψ GS ISO 8015 : 1985Ψ GS ISO 7083 : 1983Ψ GS ISO 3040 : 1990Ψ GS ISO 8826-1 : 1989Ψ GS ISO 6413 : 1988Ψ GS ISO 406 : 1987Ψ GS ISO 2553 : 1992Ψ GS ISO 9222-1 : 1989Ψ GS ISO 1101 : 2004Ψ GS ISO 1302 : 2002Ψ GS ISO 6412-2 : 1989Ψ 389 .30 01.20.100.100.100.20 01.040.100.100. 17.040.ICS 01.100.30 01.040.100.100.100.23.10 01.20 .020 01.080.10 01.100.100.100.01 01.100.01 01.20 01.080.100.080.080.30 01.20 01.20.10 01.20 01.01 01.100.99.100.01 01.30 01.080.01 01.100.100.30 01. 21.10 01.20 01.080. 080.080. 03. 03.020. 03.30 03.10 03.160 Standard Number GS ISO 6412-1 : 1989Ψ GS ISO 7200 : 2004Ψ GS ISO/IEC GUIDE 41 : GS ISO/IEC GUIDE 7 : GS 548 : 2007 GS ISO 10005 : 2005Ψ GS ISO 10015 : 1999Ψ GS ISO 10007 : 2003Ψ GS ISO 10006 : 2003Ψ GS ISO 10012 : 2003Ψ GS ISO 24801-1 : 2007Ψ GS ISO 24803 : 2007Ψ GS ISO 24801-2 : 2007Ψ GS ISO 24802-2 : 2007Ψ GS ISO 24802-1 : 2007Ψ GS ISO 24801-3 : 2007Ψ GS ISO 24510 : 2007Ψ GS ISO 9001 : 2000Ψ GS ISO 9004 : 2000Ψ GS ISO 19011 : 2002Ψ GS 361 : 2003 GS ISO/IEC GUIDE 65 : GS ISO/IEC GUIDE 27 : GS ISO/IEC 17025 : 2005Ψ GS ISO/IEC GUIDE 60 : GS ISO/IEC GUIDE 23 : GS ISO/IEC GUIDE 67 : GS ISO/IEC GUIDE 28 : GS 364 : 2001 GS ISO 2859-3 : 2005Ψ GS ISO 2859-1 : 1999Ψ GS ISO 2859-2 : 1985Ψ GS 932 : 2008 Page 202 218 277 276 37 250 250 250 250 250 274 275 274 274 274 274 274 243 243 272 31 277 276 276 277 276 277 277 32 149 149 149 62 390 .20 03.100.20 03. 03.10 .99.120 01. 17.30 03.10 03.120.110 01.10 03.020 03.120.200 03.30 .120.ICS 01.20 03.040.120.060.120.30 .120. 03.120.100.30.20 03.30 03.10 03.120.10.080.140.020.080.200 03. 65.120.20 03.080.01 01.120.020. 03.120.20 03.20 03.120.020.20 03.00 .10 03.020.020.120.30 03.120. 03. 13.23.10.200 03.120.020.20 01.30.30 .080.30.20 03.080.120.30. 03. 13.01 03.200 03.100.30.120.03.30.10 03.10 03. 100.01 07.30 07.100.060.20 07.30 07.30 07.200 07.45 13.100.100.30 07.100.20 13.020.30 07.30 07.30 07.060.100.200 03.100 07. 13.45 13.060.30 07.060.100.100.060.060.060.100.060.100.30 07.100.30 07.100. 13.20.30 07.20 13.30 11.10 13.20 13.060.060.20 13.020.45 13.20.100.100.20 13.100.45 Standard Number GS 919-1 : 2008 GS 919-2 : 2008 GS ISO 7218 : 2007Ψ GS ISO 8914 : 1990Ψ GS ISO 7954 : 1987Ψ GS ISO 6461-1 : 1986Ψ GS ISO 6222 : 1999Ψ GS ISO 9308-2 : 1990Ψ GS ISO 4831 : 2006Ψ GS ISO 6887-1 : 1999Ψ GS ISO 7932 : 2004Ψ GS ISO 7251 : 2005Ψ GS ISO 8261 : 2001Ψ GS ISO 4833 : 2003Ψ GS ISO 17604 : 2003Ψ GS ISO 6888-1 : 1999Ψ GS ISO 6887-4 : 2003Ψ GS ISO 6887-3 : 2003Ψ GS ISO 6887-2 : 2003Ψ GS ISO 6579 : 2002Ψ GS 303 : 2008 GS ISO 14001 : 2004Ψ GS ISO 14004 : 2004Ψ GS 175-4 : 1998 GS 175-5 : 1998 GS 220 : 1998 GS 175-1 : 2009 GS 786 : 2005 GS ISO 5667-5: 2006Ψ GS ISO 5667-6: 2005Ψ GS ISO 5667-1 : 2006Ψ GS ISO 19458 : 2006Ψ GS ISO 5667-3: 2003Ψ Page 60 60 219 241 230 203 199 245 183 212 229 219 232 183 271 212 212 212 212 206 25 266 266 14 14 19 14 52 194 194 194 272 194 391 .20 07.01 07.060.060.ICS 03.060.10 13.20 07.100.100.20 13.45 13. 020 13. 29.260.040.220.40. 29.50 13.020 17. 29.020 13.260.120.20 13.220.020 17.40.020 13.20 17.40. 29.50 13. 29.180 13.160 13. 29.220.60 13. 020 13.020 13.40 13.180 13.060.020 17.06010 . 29.120: 97.60 13.40 13.40.120: 97.50 13.140.220.50 17 220. 13.040.60 13.060.220.180 .180 13. 91.220.120.020 13.01 Standard Number GS ISO 7888 : 1985Ψ GS ISO 7887 : 1994Ψ GS ISO 7027 : 1999Ψ GS 175-2 : 1998 GS ISO 5667-4: 1987Ψ GS IEC 60335-2-6 : GS IEC 60335-2-12 : GS IEC 60335-2-14 : GS IEC 60335-2-78 : GS IEC 60335-2-35 : GS ISO 2631-1 : 1997Ψ GS ISO 2631-2 : 2003Ψ GS ISO 7726 : 1998Ψ GS ISO 6385 : 2004Ψ GS ISO 9241-1 : 1997Ψ GS ISO 8030 : 1995Ψ GS ISO 3795 : 1989Ψ GS IEC 60695-2-11 : GS IEC 60695-2-12 : GS IEC 60695-2-10 : GS IEC 60695-11-10 : GS IEC 60695-2-13 : GS IEC 61032 : 1997Ψ GS IEC 60529 : 2001Ψ GS IEC 60364-4-41 : GS IEC 60051-1 : 1997Ψ GS ISO GS ISO 497 : 1973Ψ 3 : 1973Ψ Page 228 228 215 14 194 84 83 83 85 84 146 146 227 202 245 230 165 90 90 90 90 90 98 88 85 77 112 104 278 278 105 104 135 GS OIML R 120 : 1996Ψ GS OIML R GS ISO GS ISO 44 : 1985Ψ 17 : 1973Ψ 1 : 2002Ψ GS ISO 1829 : 1975Ψ 392 .97.01 17.260.060.o6o.160 13. 91.020 17.180 13.040.45 13. 35.020 17.40.040.220.ICS 13.060.120: 97.040.040.020 13.60 13. 10 17.040.220.20 17.10. 25.040.040.10 17. 29.040.160 .01 17.40 17.30.035.240.20 17.01 17.100 17.220.99.140.20 17. 29. 19.160.220.01 17.20 17. 47.220.020 17.20 17.160 17.ICS 17.080 Standard Number GS ISO 2538 : 1998Ψ GS ISO 2768-2 : 1989Ψ GS ISO 8062 : 1994Ψ GS ISO 2768-1 : 1989Ψ GS ISO 286-2 : 1988Ψ Page 145 147 231 147 111 266 262 265 175 130 6 12 GS ISO 13920 : 1996Ψ GS ISO 12085 : 1996Ψ GS ISO 13565-2 : 1996Ψ GS ISO 4288 : 1996Ψ GS ISO 1502 : 1996Ψ GS 85 : 2005 GS 151 : 2005 GS OIML R GS OIML R GS ISO GS ISO GS ISO 52 : 2004Ψ 76-1 : 278 278 113 105 111 198 229 215 94 98 102 102 101 98 82 88 86 86 77 77 77 532 : 1975Ψ 16 : 1975Ψ 266 : 1997Ψ GS ISO 6070 : 1981Ψ GS ISO 7919-5 : 1997Ψ GS ISO 6954 : 2000Ψ GS IEC 60865-2 : 1994Ψ GS IEC 61166 : 1993Ψ GS IEC 62053-21 : GS IEC 62053-22 : GS IEC 62052-11 : GS IEC 61083-1 : 2001Ψ GS IEC 60270 : 2000Ψ GS IEC 60587 : 1984Ψ GS IEC 60372 : 1984Ψ GS IEC 60372 : 1991 GS IEC 60068-2-32 : GS IEC 60068-2-32 : GS IEC 60060-1 : 1989Ψ 393 .10 17.040.035.220.220.040.20 17.040.100 17. 29.040 19.160.035. 29. 29.080 17.99.99 17.20: 19.220.10 17.240.10 17.10 17.140.100 17.01.140.040 19.080 17. 29.040.040.99. 21.220.220.01 17.20 17.20 17.220.01 17.040.99 19.01.040.100.20.060 17. 10 21.70 20.120 20.10 21.01 21.30 21.040.080.060.040.00.060.060.10 21.040.10 21.040.060.060.10 21.060.01 21.01 21.020 21.01 21.01 21.060.080.01 21.060 21.10 21.040.020.10 21.01 19.060.10 21.10 Standard Number GS IEC 61442 : 2005Ψ GS IEC 60112 : 2003Ψ GS ISO 565 : 1990Ψ Page 99 79 114 172 173 125 86 110 110 150 150 150 150 122 109 109 104 104 111 183 157 111 172 159 182 182 183 242 109 170 143 226 223 GS ISO 4080 : 1991Ψ GS ISO 4156-2 : 2005Ψ GS ISO 1132-2: 2001Ψ GS IEC 60410 : 1973Ψ GS ISO GS ISO 262 : 1998Ψ 261 : 1998Ψ GS ISO 2901 : 1993Ψ GS ISO 2902 : 1977Ψ GS ISO 2903 : 1993Ψ GS ISO 2904 : 1977Ψ GS ISO GS ISO GS ISO GS ISO GS ISO GS ISO 965-3 : 1998Ψ 228-1 : 2000Ψ 228-2 : 1987Ψ 7-1 : 1994Ψ 7-2 : 2000Ψ 273 : 1979Ψ GS ISO 4759-3 : 2000Ψ GS ISO 3269 : 2000Ψ GS ISO 272 : 1982Ψ GS ISO 4042 : 1999Ψ GS ISO 3508 : 1976Ψ GS ISO 4753 : 1999Ψ GS ISO 4757 : 1983Ψ GS ISO 4759-1 : 2000Ψ GS ISO 8991 : 1986Ψ GS ISO 225 : 1983Ψ GS ISO 4016 : 1999Ψ GS ISO 2342 : 2003Ψ GS ISO 7721-2 : 1990Ψ GS ISO 7435 : 1983Ψ 394 .30 21.040.01 21.10 21.01 21.29.060.30 21. 29.040.040.040.120.035.20 19.30 21.040.060.060.060. 31.30 21.040.060.ICS 19.040.060.01 21.01 21.20 21.060.10 21. 10 21.060.10 21.060.10 21.20 Standard Number GS ISO 7436 : 1983Ψ GS ISO 8765 : 1999Ψ GS ISO 1580 : 1994Ψ GS ISO 4014 : 1999Ψ GS ISO 1483 : 1983Ψ GS ISO 1482 : 1983Ψ GS ISO 1481 : 1983Ψ GS ISO 7434 : 1983Ψ GS ISO 4015 : 1979Ψ GS ISO 2010 : 1994Ψ GS ISO 4017 : 1999Ψ GS ISO 4029 : 2003Ψ GS ISO 4028 : 2003Ψ GS ISO 4027 : 2003Ψ GS ISO 2702 : 1992Ψ GS ISO 4026 : 2003Ψ GS ISO 4018 : 1999Ψ GS ISO 6157-1 : 1988Ψ GS ISO 8676 : 1999Ψ GS ISO 885 : 2000Ψ Page 223 240 131 169 129 129 129 223 169 137 170 171 171 170 146 170 170 199 238 120 199 217 222 222 216 137 217 171 174 120 242 237 237 GS ISO 6157-3 : 1988Ψ GS ISO 7050 : 1983Ψ GS ISO 7379 : 1983Ψ GS ISO 7380 : 2004Ψ GS ISO 7046-2 : 1990Ψ GS ISO 2009 : 1994Ψ GS ISO 7049 : 1983Ψ GS ISO 4032 : 1999Ψ GS ISO 4162 : 1990Ψ GS ISO 898-2 : 1992Ψ GS ISO 8992 : 2005Ψ GS ISO 8673 : 1999Ψ GS ISO 8674 : 1999Ψ 395 .060.10 21.10 21.060.10 21.10 21.10 21.10 21.060.10 21.10 21.10 21.060.10 21.20 21.060.10 21.060.060.10 21.060.10 21.10 21.060.060.060.060.060.060.20 21.060.060.060.20 21.10 21.060.060.060.060.060.10 21.10 21.060.060.060.10 21.060.060.060.ICS 21.10 21.10 21.060.10 21.20 21.060.10 21.060.10 21.10 21.20 21. 060.50 21.30 21.50 21.060.30 21.060.060.060.060.20 21.060.20 21.060.20 21.060.50 21.060.20 21.ICS 21.060.30 21.060.060.060.50 21.20 21.20 21.060.060.060.50 Standard Number GS ISO 8675 : 1999Ψ GS ISO 7719 : 1997Ψ GS ISO 7720 : 1997Ψ GS ISO 8839 : 1986Ψ GS ISO 7043 : 1997Ψ GS ISO 4161 : 1999Ψ GS ISO 7040 : 1997Ψ GS ISO 7041 : 2002Ψ GS ISO 898-6 : 1994Ψ Page 238 226 226 241 216 174 216 216 120 216 171 171 171 171 216 217 218 218 217 217 217 218 239 239 238 239 126 240 240 240 238 239 240 GS ISO 7042 : 1997Ψ GS ISO 4033 : 1999Ψ GS ISO 4034 : 1999Ψ GS ISO 4035 : 1999Ψ GS ISO 4036 : 1999Ψ GS ISO 7045 : 1994Ψ GS ISO 7092 : 2000Ψ GS ISO 7094 : 2000Ψ GS ISO 7093-1 : 2000Ψ GS ISO 7091 : 2000Ψ GS ISO 7089 : 2000Ψ GS ISO 7090 : 2000Ψ GS ISO 7093-2 : 2000Ψ GS ISO 8740 : 1997Ψ GS ISO 8737 : 1986Ψ GS ISO 8736 : 1986Ψ GS ISO 8738 : 1986Ψ GS ISO 1234 : 1997Ψ GS ISO 8747 : 1997Ψ GS ISO 8749 : 1986Ψ GS ISO 8746 : 1997Ψ GS ISO 8734 : 1997Ψ GS ISO 8743 : 1997Ψ GS ISO 8745 : 1997Ψ 396 .20 21.060.50 21.20 21.20 21.20 21.060.060.060.30 21.060.060.060.060.20 21.060.060.060.50 21.50 21.50 21.060.30 21.20 21.50 21.20 21.50 21.060.060.30 21.060.060.30 21.20 21.20 21. 20 21.60 21.50 21.100.080.100.100.20 21.10 21.100.10 21.10 21.100.100.20 21.100.060.ICS 21.100.10 21.20 21.99 21.100.100.99 21.060.100.060.100.10 21.10 21.060.10 21.50 21.060.50 21.10 21.060.060.10.50 21.100.10.100.060.100. 77.20 21.100.060.50 21.060. 83.20 Standard Number GS ISO 8733 : 1997Ψ GS ISO 8744 : 1997Ψ GS ISO 2338 : 1997Ψ GS ISO 8739 : 1997Ψ GS ISO 8742 : 1997Ψ GS ISO 2340 : 1986Ψ GS ISO 2339 : 1986Ψ GS ISO 8735 : 1997Ψ GS ISO 8741 : 1997Ψ GS ISO 2341 : 1986Ψ GS ISO 6525 : 1983Ψ GS ISO 6526 : 1983Ψ GS ISO 6524 : 1992Ψ GS ISO 4383 : 2000Ψ GS ISO 4386-1 : 1992Ψ GS ISO 7905-2 : 1995Ψ GS ISO 4384-1 : 2000Ψ GS ISO 6280 : 1981Ψ GS ISO 2795 : 1991Ψ GS ISO 4379 : 1993Ψ GS ISO 7148-1 : 1999Ψ GS ISO 7905-4 : 1995Ψ GS ISO 7905-3 : 1995Ψ GS ISO 3548 : 1999Ψ GS ISO 6282 : 1983Ψ GS ISO 4381 : 2000Ψ GS ISO 6691 : 2000Ψ GS ISO GS ISO 492 : 2002Ψ 113 : 1999Ψ Page 238 240 142 239 239 143 143 238 239 143 204 204 204 176 176 228 176 200 147 176 218 229 228 160 200 176 209 112 107 153 106 112 156 GS ISO 3096 : 1996Ψ GS ISO GS ISO 104 : 2002Ψ 464 : 1995Ψ GS ISO 3228 : 1993Ψ 397 .100.10 21.10 21.100.10 21.10 21.50 21.100.120.100.50 21.060.20 21.50 21.50 21.060.10 21.100.50 21. 220.100.40 21.120.20 21.180 21.100 21.120.200 21.100.120 21.100.100.120.120.30 21.30 21.20 21.10 Standard Number GS ISO 2982-2 : 2001Ψ GS ISO 3031 : 2000Ψ GS ISO 1206 : 2001Ψ GS ISO 199 : 2005Ψ Page 152 152 126 109 152 114 105 234 126 112 183 174 167 173 104 155 152 241 255 136 223 182 116 116 267 127 201 127 127 105 187 110 110 GS ISO 3030 : 1996Ψ GS ISO GS ISO 582 : 1995Ψ 15 : 1998Ψ GS ISO 8443 : 1999Ψ GS ISO 1207 : 1992Ψ GS ISO 496 : 1973Ψ GS ISO 4863 : 1984Ψ GS ISO 4156-3 : 2005Ψ GS ISO 3912 : 1977Ψ GS ISO 4156-1 : 2005Ψ GS ISO 14 : 1982Ψ GS ISO 3117 : 1977Ψ GS ISO 2953 : 1999Ψ GS ISO 8821 : 1989Ψ GS ISO 10814 : 1996Ψ GS ISO 1940-1 : 2003Ψ GS ISO 7475 : 2002Ψ GS ISO 4708 : 2000Ψ GS ISO GS ISO 677 : 1976Ψ 678 : 1976Ψ GS ISO 14104 : 1995Ψ GS ISO 1341 : 1976Ψ GS ISO 6336-5 : 2003Ψ GS ISO 1340 : 1976Ψ GS ISO 1328-1 : 1995Ψ GS ISO 22 : 1991Ψ GS ISO 5291 : 1993Ψ GS ISO GS ISO 255 : 1990Ψ 254 : 1998Ψ 398 .40 21.20 21.10 21.30 21.01 21.180 21.220.100.200 21.220.20 21.30 21.120.120 21.01 21.120.ICS 21.120. 79.20 21.100.100.200 21.140.200.20 21.200 21.00 21.220.40 21.30 21.20 21.20 21.120.120.40 21.40 21.20 21.100.100.120. 020.020.220.220.30 23.220.10 21.30 23.10 21.220.020.020.10 21.020.220.220.10 21.220.10 21.220.020.10 21.30 23.10 21.30 23.10 21.220.220.10 21.220.220.020.10 21.30 23.10 23.30 23.30 21.30 21.30 23.220.020.220.30 21.020.220.30 23.30 23.220.10 21.30 21.220.220.020.30 23.220.10 21.220.020.10 21.30 Standard Number GS ISO 9563 : 1990Ψ GS ISO 1604 : 1989Ψ GS ISO 9608 : 1994Ψ GS ISO 9980 : 1990Ψ GS ISO 5296-1 : 1989Ψ GS ISO 155 : 1998Ψ Page 247 131 247 250 188 108 175 233 188 134 174 113 188 187 187 176 159 255 114 112 278 267 257 257 257 255 236 223 255 165 184 257 166 GS ISO 4184 : 1992Ψ GS ISO 8419 : 2003Ψ GS ISO 5295 : 1987Ψ GS ISO 1813 : 1998Ψ GS ISO 4183 : 1995Ψ GS ISO 529 : 2001Ψ GS ISO 5296-2 : 1989Ψ GS ISO 5292 : 1995Ψ GS ISO 5294 : 1989Ψ GS ISO 4347 : 2004Ψ GS ISO 3512 : 1992Ψ GS ISO 10823 : 2004Ψ GS ISO GS ISO 606 : 2004Ψ 487 : 1998Ψ 71 : 1985Ψ GS OIML R GS ISO 14245 : 2006Ψ GS ISO 11116-2 : 1999Ψ GS ISO 11114-2 : 2000Ψ GS ISO 11116-1 : 1999Ψ GS ISO 10691 : 2004Ψ GS ISO 8504-3 : 1993Ψ GS ISO 7438 : 2005Ψ GS ISO 10920 : 1997Ψ GS ISO 3807-1 : 2000Ψ GS ISO 5145 : 2004Ψ GS ISO 11114-1 : 1997Ψ GS ISO 3807-2 : 2000Ψ 399 .020.30 23.020.10 21.ICS 21.30 23.10 21. 45 23.040.040.040.45 23.40 23.20.40 23.20.020.040.040.040.060.040.040.30 .040.200 23.040.01 23.020.040. 23.040. 23.ICS 23.40 23.30 23.45 23. 23. 75.45 Standard Number GS ISO 13341 : 1997Ψ GS ISO 11755 : 2005Ψ GS ISO 10297 : 2006Ψ GS ISO 22991 : 2004Ψ GS ISO 10464 : 2004Ψ GS ISO 13761 : 1996Ψ GS ISO 7268 : 1983Ψ GS ISO 10804-1 : 1996Ψ GS ISO 1081 : 1995Ψ GS ISO 6761 : 1981Ψ GS ISO 2505 : 2005Ψ GS ISO 11922-1 : 1997Ψ GS ISO 9852 : 2007Ψ GS ISO 9080 : 2003Ψ GS ISO 1167-1 : 2006Ψ GS ISO 18553 : 2002Ψ GS ISO 1167-2 : 2006Ψ GS ISO 1746 : 1998Ψ GS ISO 5256 : 1985Ψ GS ISO 3419 : 1981Ψ GS ISO 3545-3 : 1989Ψ GS ISO 49 : 1994Ψ Page 264 261 252 273 253 265 220 255 123 210 145 261 249 243 125 272 125 134 187 157 159 105 173 173 187 110 180 137 137 220 172 118 118 GS ISO 4144 : 2003Ψ GS ISO 4145 : 1986Ψ GS ISO 5251 : 1981Ψ GS ISO 264 : 1976Ψ GS ISO 4434 : 1977Ψ GS ISO 2048 : 1990Ψ GS ISO 2045 : 1988Ψ GS ISO 7279 : 1984Ψ GS ISO 4132 : 1979Ψ GS ISO GS ISO 727-2 : 2005Ψ 727-1 : 2002Ψ 400 .20 23.45 23.45 23.20 23. 75.040.45 23.45 23.040.01 23.30 23.040.20.30 .020.40 23.45 23. 23.01 23.40 23.040.040.040.020.040.40 23.10 23.20 23.040.70 23.30 .200 23.040.45 23.01 23.040. 23.040.040.040.40 23.20.20 23.020.040.45 23.040.40 23.040.040.040.040.040. 060.040.70 23.060.70 23.040.040.040.01 23.01 23.040.060.01 Standard Number GS ISO 580 : 2005Ψ GS ISO 4023 : 1991Ψ GS ISO 3460 : 1975Ψ GS ISO 3503 : 1976Ψ GS ISO 3501 : 1976Ψ GS ISO 7005-2 : 1988Ψ GS ISO 7005-3 : 1988Ψ GS ISO 6802 : 2005Ψ GS ISO 1402 : 1994Ψ GS ISO 7662 : 1988Ψ GS ISO 4672 : 1997Ψ GS ISO 6801 : 1983Ψ GS ISO 4641 : 2005Ψ GS ISO 8580 : 1987Ψ GS ISO 1403 : 2005Ψ GS ISO 7233 : 2006Ψ GS ISO 8031 : 1993Ψ GS ISO 7326 : 2006Ψ GS ISO 8033 : 2006Ψ GS ISO 6134 : 2005Ψ GS ISO 6224 : 2005Ψ GS ISO 8032 : 1997Ψ GS ISO 5210 : 1991Ψ GS ISO 5199 : 2002Ψ GS ISO 5752 : 1982Ψ GS ISO 6554 : 1980Ψ GS ISO 8659 : 1989Ψ GS ISO 521 : 2001Ψ Page 114 170 158 158 158 215 215 211 127 226 182 211 182 237 128 219 230 221 231 198 199 230 186 186 195 205 237 112 210 227 227 232 204 GS ISO 6704 : 1982Ψ GS ISO 7841 : 1988Ψ GS ISO 7842 : 1988Ψ GS ISO 8233 : 1988Ψ GS ISO 6553 : 1980Ψ 401 .060 23.040.040.45 23.040.60 23.70 23.60 23.70 23.040.040.040.60 23.040.70 23.060.70 23.70 23.040.ICS 23.60 23.70 23.040.50 23.040.060.040.70 23.060.01 23.01 23.060 23.70 23.70 23.70 23.040.60 23.01 23.70 23.060.01 23.060.060 23.01 23.040.040.040.040.040.70 23.70 23. 01.01 23.20 23.100.10 23.01 23.99 23.100.100.060.01 23.20 23.100.01 23.100.100.20 Standard Number GS ISO 7259 : 1988Ψ GS ISO 5996 : 1984Ψ GS ISO 2858 : 1975Ψ GS ISO 3069 : 2000Ψ GS ISO 3661 : 1977Ψ GS ISO 9222-2 : 1989Ψ GS ISO 9110-2 : 1990Ψ GS ISO 4414 : 1998Ψ GS ISO 4413 : 1998Ψ GS ISO 9110-1 : 1990Ψ GS ISO 2944 : 2000Ψ GS ISO 6358 : 1989Ψ GS ISO 5209 : 1977Ψ GS ISO 8778 : 2003Ψ GS ISO 6072 : 2002Ψ GS ISO 4392-2 : 2002Ψ GS ISO 4392-1 : 2002Ψ GS ISO 4412-3 : 1991Ψ GS ISO 3662 : 1976Ψ GS ISO 4412-1 : 1991Ψ GS ISO 10767-1 : 1996Ψ GS ISO 4394-1 : 1980Ψ GS ISO 4393 : 1978Ψ GS ISO 8132 : 2006Ψ GS ISO 6547 : 1981Ψ GS ISO 10099 : 2001Ψ GS ISO 7425-1 : 1988Ψ GS ISO 7181 : 1991Ψ GS ISO 4395 : 1978Ψ GS ISO 7425-2 : 1989Ψ GS ISO 6195 : 2002Ψ GS ISO 6432 : 1985Ψ GS ISO 6437 : 1984Ψ Page 220 197 148 153 162 245 244 179 178 244 151 201 186 241 198 177 177 178 162 178 255 177 177 231 204 251 222 218 177 222 199 203 203 402 .01 23.100.20 23.080 23.20 23.100.20 23.060.100.100.20 23.20 23.100.100.20 23.140.100.20 23.100.20 23.080 23.100.10 23.20 23.20 23.100.100.100.100.30 23.100.01 23.100.10 23.100.10 23.10 23.30 23.100.100.100.060. 83.01 23.01 23.ICS 23.100.01 23.01 23.100.100. 100.100.50 23.20 23.100.30 23.100.100.30 23.100.100.50 23.60 23.100.100.100.30 23.50 23.50 23.30 23.100.50 23.100.100.100.100.40 23.ICS 23.100.40 23.100.100.100.100.50 23.60 23.50 23.60 23.100.60 23.60 Standard Number GS ISO 3320 : 1987Ψ GS ISO 10100 : 2001Ψ GS ISO 5597 : 1987Ψ GS ISO 15552 : 2004Ψ GS ISO 4399 : 1995Ψ GS ISO 6952 : 1994Ψ GS ISO 5782-1 : 1997Ψ GS ISO 5782-2 : 1997Ψ GS ISO 4400 : 1994Ψ GS ISO 9974-3 : 1996Ψ GS ISO 9974-2 : 1996Ψ GS ISO 2943 : 1998Ψ GS ISO 6150 : 1988Ψ GS ISO 7241-1 : 1987Ψ GS ISO 7241-2 : 2000Ψ GS ISO 3949 : 2004Ψ GS ISO 6403 : 1988Ψ GS ISO 6953-2 : 2000Ψ GS ISO 6953-1 : 2000Ψ GS ISO 7790 : 1997Ψ GS ISO 4401 : 2005Ψ GS ISO 5599-2 : 2001Ψ GS ISO 7368 : 1989Ψ GS ISO 5781 : 2000Ψ GS ISO 5599-1 : 2001Ψ GS ISO 6194-3 : 1988Ψ GS ISO 2942 : 2004Ψ GS ISO 3938 : 1986Ψ GS ISO 11170 : 2003Ψ GS ISO 3723 : 1976Ψ GS ISO 3968 : 2001Ψ GS ISO 4021 : 1992Ψ GS ISO 4407 : 2002Ψ Page 157 251 193 269 177 214 195 195 178 249 249 151 198 219 219 168 202 214 214 227 178 193 221 195 193 199 151 167 260 164 169 170 178 403 .100.20 23.100.140.100.100.100.40.60 23.40 23.40 23. 83.30 23.100.60 23.50 23.50 23.100.20 23.100.30 23.100.30 23.60 23.30 23.100.100.20 23.100. 00 23.42 : 2003Ψ GS ISO 10303 .160 23.160 23. 75.40 25.040.140 23.00.40 25.060. 83.160 23.040.ICS 23.120.40 25.21 : 2002Ψ GS ISO 10303 .100.140.40 25.40 25. 27.140 23.080.120 23.40 25.080.44 : 2000Ψ GS ISO 702-1 : 2001Ψ GS ISO 5414-1 : 2002Ψ GS ISO 3089 : 2005Ψ GS ISO 2772-2 : 1974Ψ GS ISO 2772-1 : 1973Ψ GS ISO 3190 : 1975Ψ GS ISO 2423 : 1982Ψ 404 .120 23.120 23..43 : 2000Ψ GS ISO 10303 .120 23.060.100.160 23.040.20 25.120 23.160 25.040.20 25.080.060.60.40 25.40 Standard Number GS ISO 4406 : 1999Ψ GS ISO 3601-3 : 2005Ψ GS ISO 3722 : 1976Ψ GS 40 : 1971 GS ISO 6580 : 2005Ψ GS IEC 60335-2-80 : GS ISO 13351 : 1996Ψ GS 362 : 2001 GS ISO 5151 : 1994Ψ GS ISO 1217 : 1996Ψ GS ISO 5388 : 1981Ψ GS ISO 5390 : 1977Ψ GS ISO 3530 : 1979Ψ GS ISO 1609 : 1986Ψ GS ISO 3669 : 1986Ψ GS ISO 1607-1 : 1993Ψ GS ISO 1608-1 : 1993Ψ GS ISO 2861-2 : 1980Ψ GS ISO 2861-1 : 1974Ψ GS ISO 1608-2 : 1989Ψ GS ISO 10303 -203 : GS ISO 230-2 : 1997Ψ Page 178 161 164 2 206 85 264 31 185 126 189 189 159 132 163 132 132 149 149 132 253 110 252 252 252 253 117 189 153 147 147 155 144 GS ISO 10303 .120 23.20 25.100.080.080.040.160 23.160 23.50 23.60.160 23.40 25.140 23.99 23.20 25.040. 160.160.30 25.20 25.10 25.160.30 25.30 25.160.120.20 25.30 25.ICS 25.160.10 25.30 25.160.30 25.10 25.20 25.160.30 25.10 25.20 25.30 Standard Number GS ISO 6899 : 1984Ψ GS ISO 6898 : 1984Ψ GS ISO 14732 : 1998Ψ GS ISO 15614-1 : 2004Ψ GS ISO 9606-1 : 1994Ψ GS ISO 13916 : 1996Ψ GS ISO 857-1 : 1998Ψ Page 213 213 268 269 247 265 119 160 123 156 160 146 186 115 211 211 143 244 197 196 233 116 197 197 123 197 245 231 229 231 185 234 185 GS ISO 3580 : 2004Ψ GS ISO 1071 : 2003Ψ GS ISO 3253 : 1998Ψ GS ISO 3581 : 2003Ψ GS ISO 2560 : 2002Ψ GS ISO 5184 : 1979Ψ GS ISO 636 : 2004Ψ GS ISO 6848 : 2004Ψ GS ISO 6847 : 2000Ψ GS ISO 2401 : 1972Ψ GS ISO 9090 : 1989Ψ GS ISO 5827 : 1983Ψ GS ISO 5822 : 1988Ψ GS ISO 8430-1 : 1988Ψ GS ISO 669 : 2000Ψ GS ISO 5828 : 2001Ψ GS ISO 5829 : 1984Ψ GS ISO 1089 : 1980Ψ GS ISO 5830 : 1984Ψ GS ISO 9312 : 1990Ψ GS ISO 8167 : 1989Ψ GS ISO 7931 : 1985Ψ GS ISO 8207 : 1996Ψ GS ISO 5183-1 : 1998Ψ GS ISO 8430-2 : 1988Ψ GS ISO 5175 : 1987Ψ 405 .20 25.160.160.160.160.160.160.30 25.30 25.01 25.160.160.160.30 25.20 25.160.20 25.20 25.160.160.20 25.160.160.10 25.30 25.160.30 25.160.160.160.20 25.160.160.30 25.160.160.30 25.10 25.160.160.30 25.120. 40 25.160.30 25.160. 29.160.40 25.40 25.ICS 25.10 Standard Number GS ISO 2503 : 1998Ψ GS ISO 7289 : 1996Ψ GS ISO 9313 : 1989Ψ GS ISO 865 : 1981Ψ Page 145 220 245 119 247 234 186 221 196 163 185 266 232 271 163 196 173 143 271 271 185 254 214 185 246 186 235 258 258 259 236 235 259 GS ISO 9539 : 1988Ψ GS ISO 8430-3 : 1988Ψ GS ISO 5183-2 : 2000Ψ GS ISO 7291 : 1999Ψ GS ISO 5826 : 1999Ψ GS ISO 3677 : 1992Ψ GS ISO 5178 : 2001Ψ GS ISO 13919-1 : 1996Ψ GS ISO 8249 : 2000Ψ GS ISO 17636 : 2003Ψ GS ISO 3690 : 2000Ψ GS ISO 5817 : 2003Ψ GS ISO 4136 : 2001Ψ GS ISO 2400 : 1972Ψ GS ISO 17639 : 2003Ψ GS ISO 17637 : 2003Ψ GS ISO 5173 : 2000Ψ GS ISO 10656 : 1996Ψ GS ISO 6947 : 1990Ψ GS ISO 5179 : 1983Ψ GS ISO 9454-1 : 1990Ψ GS ISO 5187 : 1985Ψ GS ISO 8502-3 : 1992Ψ GS ISO 11124-3 : 1993Ψ GS ISO 11124-4 : 1993Ψ GS ISO 11126 .30 25.10 25.10 25.30 25.30 25.30 25.40 25.160.160.10 25.160.160.160.50 25.10 25.10 25.220.30 25.40 25.220.40 25.40 25.220.10 25.160.160.160.40 25.220.220.160.40 25.160.50 25.40 25.50 25.30.40 25.160.220.9 : GS ISO 8504-1 : 2000Ψ GS ISO 8502-2 : 2005Ψ GS ISO 11126 -10 : 406 .160.160.160.160.160.40 25.160.220.180 25.160.160.40 25.160.160.40 25.160.30 25.30 25.160. 220.4 : GS ISO 11126 .10.220.10 25.220.220.10 25.20 . 83.220.20 25.220.10 25.10 25.5 : GS ISO 11124-2 : 1993Ψ GS ISO 8503-1 : 1988Ψ GS ISO 8501-2 : 1994Ψ GS ISO 11126 .3 : GS ISO 11126 .ICS 25.20 25.220.220.220.220.220.87. 25.220.220.10 25.10 25.060 25.220.220.20 25.220.10 25.20.20 25.10.220.220.220.020 25.20 25.20 25.220.10 25.10 25.10 25.40 Standard Number GS ISO 8503-2 : 1988Ψ GS ISO 11126 .20 25. 25.20 25.77.220.20 25.220.220.220.20 25.140.220.20 25.20.10 25.220.20 25.220.220.20 25.20 25.220.1 : GS ISO 11126 .20 25.40 25.40 25.6 : GS ISO 8504-2 : 2000Ψ GS ISO 3861 : 2005Ψ GS ISO 8502-9 : 1998Ψ GS ISO 2135 : 1984Ψ GS ISO 2085 : 1976Ψ GS ISO 2143 : 1981Ψ GS ISO 2931 : 1983Ψ GS ISO 3613 : 2000Ψ GS ISO 8993 : 1989Ψ GS ISO 7599 : 1983Ψ GS ISO 8251 : 1987Ψ GS ISO 3868 : 1976Ψ GS ISO 4536 : 1985Ψ GS ISO 6988 : 1985Ψ GS ISO 3210 : 1983Ψ GS ISO 3211 : 1977Ψ GS ISO 2360 : 2003Ψ GS ISO 4543 : 1981Ψ GS ISO 3892 : 2000Ψ GS ISO 8994 : 1989Ψ GS ISO 2064 : 1996Ψ GS ISO 2063 : 2005Ψ Page 236 258 257 235 235 259 257 258 258 258 259 236 166 235 139 138 139 151 161 242 225 232 166 180 215 156 156 143 180 167 242 138 138 407 .220.220.10 25.220.8 : GS ISO 11124-1 : 1993Ψ GS ISO 11126 .220.220.20 25.220. 160 Standard Number GS ISO 1460 : 1992Ψ GS ISO 3497 : 2000Ψ GS ISO 2093 : 1986Ψ GS ISO TR 9769 : 1991Ψ GS ISO 2178 : 1982Ψ GS ISO 1985 : 1998Ψ GS ISO 14112 : 1996Ψ GS ISO 1463 : 2003Ψ GS ISO 1458 : 2002Ψ GS ISO 1456 : 2003Ψ GS ISO 11650 : 1999Ψ GS IEC 61227 : 1993Ψ GS ISO 9059 : 1990Ψ GS IEC 60904 .30 26.160 27.160 27.40 25.160 27.160 27.160 27.080.7 : 1998Ψ GS IEC 61730-2 : 2004Ψ GS IEC 60904 .160 27.9 : 2007Ψ GS IEC 60904 .220.40 25.40 25.40 26.160 27.160 27. 25.20 27.120.160 27.160 27.160 27.ICS 25.160 27.160 27.2 : 2007Ψ GS 536 : 2002 GS ISO 9806-2 : 1995Ψ GS ISO 9806-3 : 1995Ψ GS ISO TR 9901 : 1990Ψ GS ISO 9808 : 1990Ψ GS IEC 60904 .20.220.8 : 1998Ψ GS ISO 9847 : 1992Ψ GS ISO 9845-1 : 1992Ψ GS ISO 9060 : 1990Ψ GS ISO TR 10217 : GS ISO 9846 : 1993Ψ Page 129 158 138 275 140 137 267 129 129 128 261 99 243 96 96 96 99 97 100 96 100 96 36 248 248 275 248 96 249 248 243 275 249 408 .160 27.220.50 26.160 27.40 26.160 27.220.100.160 27.020 27.220.40 25.220.220.3 : 1989Ψ GS IEC 61345 : 1998Ψ GS IEC 60904-10 : GS IEC 61683 : 1999Ψ GS IEC 60904 .160 27.220.160 27.40 27.60 26.1 : 2006Ψ GS IEC 60904 .220.160 27. 83.140.20 29.200 27.140 27.035.060.ICS 27.20 29.20 27.160.20 29.10. 29. 29.035.140.20.180 27.20 27.060.060.01. 29.20 29. 29.00.20 29.20 29.060.160 .060.01.91. 29.060.20.50 27.20 29.060.20 29.01.060.20 29.20 29.060.060.035.035. 29.99 29. 29. 91.060.040.020.035.035.01. 91.060. 29.140.035.50 27.160 . 29.20.20 Standard Number GS ISO 15387 : 2005Ψ GS ISO 9553 : 1997Ψ GS ISO 9459-2 : 1995Ψ GS ISO 9459-1 : 1993Ψ GS ISO 9806-1 : 1994Ψ GS IEC 60364-7-712 : GS IEC 61829 : 1995Ψ GS IEC 61701 : 1995Ψ GS ISO 5149 : 1993Ψ GS ISO/R 916 : 1968Ψ GS IEC 60811-3-1 : 2001 GS IEC 60811-1-2 : GS IEC 60811-1-4 : 2001 GS IEC 60811-1-4 : 1993 GS IEC 60811-1-4 : GS IEC 60811-1-2 : 2000 GS IEC 60811-1-2 : 1989 GS IEC 60811-3-2 : 1993 GS IEC 60811-3-2 : GS IEC 60811-3-1 : GS IEC 60811-31 : 1985 GS IEC 60672-1 : 1995Ψ GS IEC 60672-3 : 1997Ψ GS 263 : 1994 GS IEC 60471 : 1977Ψ GS IEC 60471 : 1980 GS IEC 60245-4 : 2004Ψ GS IEC 60228 : 2004Ψ GS IEC 60227-7 : 2003Ψ GS IEC 60227-6 : 2001Ψ GS IEC 60227-5 : 2003Ψ GS IEC 60227-4 : 1997Ψ GS IEC 60227-2 : 2003Ψ Page 268 247 246 246 248 85 100 100 184 277 93 92 93 93 92 92 92 94 93 93 93 89 89 22 87 87 82 81 81 81 81 81 80 409 .20 27.035.20 29.060.035.060.01.180 27.060.200 29. 29.20 29.20 29.035.060.035.140.20 29.035.060.060.060.035.20 29.160.01.20 29. 29. 29. 49.060. 91.20 29.140.20 29.30 29.20 29.160 .01.160 .30 29. 20 29.060.20 29.10 29. 29.10 29.20 29.080.10 29.060.060.080.060.20 29.160.10 29.035.20 29.080.060.060.ICS 29.10 Standard Number GS IEC 60173 : 1964Ψ GS IEC 60141-1 : 1998 GS IEC 60141-1 : 1995 GS IEC 60502-1 : 2004Ψ GS IEC 60227-3 : 1997Ψ GS IEC 60724 : 2000Ψ GS IEC 60702-1 : 2002Ψ GS IEC 60885-1 : 1987Ψ GS IEC 60227-1 : 2007Ψ GS IEC 60702-2 : 2002Ψ GS IEC 60719 : 1992Ψ GS IEC 61138 : 1995 GS IEC 61138 : 1994Ψ GS IEC 60502-2 : 2005Ψ GS IEC 60811-1-1 : GS IEC 60245-1 : 2003Ψ GS IEC 60811-1-3 : GS IEC 60811-3-2 : 2003 GS IEC 60071-1 : 1993Ψ GS IEC 60437 : 1997Ψ GS IEC 60383-1 : 1993Ψ GS IEC 60383-2 : 1993Ψ GS IEC 60507 : 1991Ψ GS IEC 60305 : 1995Ψ GS IEC 60273 : 1990Ψ GS IEC 60660 : 1999Ψ GS IEC 61245 : 1993Ψ GS IEC 61211 : 2004Ψ GS IEC 62155 : 2003Ψ GS IEC 60433 : 1998Ψ GS IEC 60120 : 1984Ψ GS IEC 60168 : 2001Ψ GS IEC 60797 : 1984Ψ Page 80 80 79 88 80 91 90 95 80 91 91 98 98 88 92 81 92 94 78 87 86 86 88 82 82 89 99 99 102 87 79 80 91 410 .080.10 29.01 29.060.035.080.080.20 29.10 29.20 29.080.060.10 29.10 29.080.10 29.20.20.060.080.10 29. 29.060.10 29.080.20 29.20 29.20 29.060.080.20 29.080.20 29.20.060.060.060.080.060.20 29. 25.20 29.20 29.080 29.10 29.060.080.060.10 29.060.20 29.20 29. 50 29.30 29.30 29.10.10 29.080.160 29.50 29.160 29.160 29.30 29.39 29.120.120.30 29.020: 43.080.10 29.30 29.140.120.10 29.120.080.220 Standard Number GS IEC 61462 : 1998Ψ GS IEC 60815 : 1986Ψ GS IEC 60720 : 1981Ψ GS IEC 60372 : 2003 GS IEC TS 61463 : 2000Ψ GS IEC 60884-2-1 : GS IEC TR 60083 : GS IEC 60884-1 : 2002Ψ GS IEC 60884-2-2 : GS IEC 60884-2-3 : GS IEC 60884-2-5 : GS IEC 60884-2-6 : GS IEC 60906-1 : 1986Ψ GS IEC 60309-1 : 2005Ψ GS IEC 60669-1 : 2000Ψ GS IEC 60669-2-1 : GS IEC 61009-2-2 : GS IEC 61009-2-1 : GS IEC 61009-1 : 2003Ψ GS IEC 61540 : 1999Ψ GS IEC 60932 : 1988Ψ GS IEC 60694 : 2002Ψ GS IEC 62271-100 : 2003Ψ GS IEC TR 60887 : GS 323 : 2003 GS 324 : 2003 GS IEC 60034-26 : GS IEC 60072-3 : 1994Ψ GS IEC TS 60034-25 : GS IEC TS 60034-17 : GS IEC 62040-3 : 1999Ψ GS IEC 60095-4 : 1996 GS 214 : 1995 Page 100 94 91 86 104 94 103 94 95 95 95 95 97 82 89 89 97 97 97 100 97 89 102 103 27 27 77 78 103 103 101 79 18 411 .40 29.10 29.120.080.130 29.120.040.40 29.30 29.30 29.140.130.10 29.130.120.120.10 29.120.160 29.130 29.120.30 29.ICS 29.120.30 29.20 29.120.140.120.200 29.20 29.120.240.22. 29.080.20 29.30 29.50 29. ICS 29.060 39.20 33.220.240.20: 43.060 39.220.220. 37.20 29.100.240.10 29.10 29.10 29.160 29.10 29.30 29.10.10 39.220.060 39.10 37.38.020.99 29.220.10 29.220.060 39. 39.020.100.040. 27.10 29.10.040.99 29.040.220. 37.43.060 Standard Number GS IEC 60086-4 : 2000Ψ GS IEC 60086-2 : 2001 GS IEC 60086-1 : 2000Ψ GS IEC 60086-2 : 2001Ψ GS IEC 60086-3 : 2004Ψ GS IEC 61056-1 : 2002Ψ GS IEC 60095-4 : 1989Ψ GS IEC 61427 : 2005Ψ GS IEC 60095-1 : 2000Ψ GS 43 : 1972 GS IEC 61951-1 : 2003Ψ GS IEC 62133 : 2002 Ψ GS IEC 61959 : 2004Ψ GS IEC 61960 : 2003Ψ GS 1 : 2001 Page 78 78 78 78 78 98 79 99 79 3 101 102 101 101 1 95 11 103 102 21 252 251 251 58 58 255 59 59 60 59 58 58 58 GS IEC 60889 : 1987Ψ GS 145-1 : 2007 GS IEC CISPR 30 : GS IEC 62053-61 : GS 242 : 1999 GS ISO 10110-11 : GS ISO 10110 .10 29.20. 37.30 29.060 39.220.220.220.220.100.060 39.6 : 1996Ψ GS ISO 10110 .20 29.100.240.10 37.060 39.200 35.10 33.220.01 29.9 : 1996Ψ GS 891 : 2007 GS 892 : 2007 GS ISO 10713 : 1992Ψ GS 903 : 2007 GS 904 : 2007 GS 916 : 2007 GS 902 : 2007 GS 893 : 2007 GS 890 : 2007 GS 889 : 2007 412 .060 39.220..040.060 39.30 29.220.260 37.020.20. 10 43.040.080.040.060. 75.60 43.10 43.40 43.060 39.080 55.ICS 39.060.100 55.040.060.040.060 43.10 43.060 39.99 Standard Number GS 901 : 2008 GS 900 : 2007 GS ISO 8653 : 1986Ψ GS ISO 9202 : 1991Ψ GS ISO 8654 : 1987Ψ GS 806 : 2006 GS ISO 4925 : 2005Ψ GS ISO 4926 : 2006Ψ GS ISO 7309 : 1985Ψ GS ISO 3871 : 2000Ψ GS 330 : 2008 GS 331 : 2008 GS ISO 6621-5 : 2005Ψ GS ISO 6621-4 : 2003Ψ GS ISO 9981 : 1998Ψ GS ISO 6621-2 : 2003Ψ GS ISO 11055 : 1996Ψ GS ISO 6621-3 : 2000Ψ GS ISO PAS 28000 : GS 87 : 1991 GS 82 : 1990 GS ISO 3266 : 1984Ψ GS ISO 3676 : 1983Ψ GS 216 : 1998 GS 173 : 1998 GS ISO 7023 : 1983Ψ GS 118 : 2007 GS ISO 3394 : 1984Ψ GS 527 : 2008 GS 290 : 2007 GS 613 : 2007 GS 116 : 2007 GS 442 : 2004 Page 59 59 237 244 237 54 184 184 221 167 27 28 207 207 250 206 256 207 275 6 6 157 163 18 14 215 9 157 35 24 39 9 34 413 .040 55. 59.080.100.040.080 43.120 43.080 55.040 55. 59.060.080 55.60 .060 39.30 55. 75.60 43.10 43.10 43.10 47.080.100 55. 75.140.40.020 43.080.30 53.020.020 43.40.060.020 55.01 50.080 55.040.060 39. 83.020.40.60 .99 50.060.100 55. 40 55.080.01 59.01 59.080.080.01 Standard Number GS 174 : 1998 GS ISO 12048 : 1994Ψ GS ISO 2247 : 2000Ψ GS 156 : 2007 GS ISO 13355 : 2001Ψ GS ISO 2234 : 2000Ψ GS ISO 2876 : 1985Ψ GS ISO 2233 : 2000Ψ GS ISO 2875 : 2000Ψ GS ISO 2244 : 2000Ψ GS 122 : 2005 GS 804-1 : 2005 GS 83 : 1990 GS ISO 105-E07 : 1989Ψ Page 14 262 141 12 264 141 150 141 149 141 9 54 6 107 184 272 106 165 106 153 106 13 10 125 10 107 152 107 106 167 106 108 107 GS ISO 5077 : 2007Ψ GS ISO 20645 : 2004Ψ GS ISO 105-A01 : 1994Ψ GS ISO 3758 : 2005Ψ GS ISO 105-A02 : 1993Ψ GS ISO 3071 : 2005Ψ GS ISO 105-B01 : 1994Ψ GS 160 : 2005 GS 126 : 2005 GS ISO 1144 : 1973Ψ GS 125 : 1989 GS ISO 105-X11 : 1994Ψ GS ISO 2947 : 1973Ψ GS ISO GS ISO 105-X12 : 2001Ψ 105-A03 GS ISO 3932 : 1976Ψ GS ISO GS ISO GS ISO 105-D01 : 1993Ψ 139 : 2005Ψ 105-D02 : 1993Ψ 414 .40 55.40 55.01 59.40 59.01 59.01 59.080.01 59.180.080.080.080.180.180.01 59.180.01 59.080.180.080.080.40 55.080.080.01 59.080.080.080.160 55.01 59.01 59.01 59.01 59.080.40 55.40 55.080.01 59.080.080.180.01 59.080.01 59.080.01 59.180.01 59.180.080.ICS 55.01 59.01 59.40 55180.01 59.01 59.40 55.080. 080.080.080.01 59.080.080.080.30 59.40 59.60 59.080.30 59.080.080.30 59.20 59.40 59.080.40 59.01 59.080.20 59.080.30 59.080.080.080.30 59.080.99 Standard Number GS 77 : 1990 GS 78 : 1990 GS 79 : 1990 GS ISO GS ISO 105-E04 : 1994Ψ 2 : 1973Ψ Page 6 6 6 107 104 214 125 138 13 165 227 219 234 167 273 266 5 266 5 10 5 5 5 128 142 182 197 35 144 183 201 56 61 GS ISO 6939 : 1988Ψ GS ISO 1139 : 1973Ψ GS ISO 2060 : 1994Ψ GS 163 : 2005 GS ISO 3801 : 1977Ψ GS ISO 7771 : 1985Ψ GS ISO 7211-2 : 1984Ψ GS ISO 8498 : 1990Ψ GS ISO 3933 : 1976Ψ GS ISO 22198 : 2006Ψ GS ISO 13934-1 : 1999Ψ GS 76 : 1990 GS ISO 13937-3 : 2000Ψ GS 75 : 1990 GS 124 : 2005 GS 74 : 1990 GS 73 : 1990 GS 72 : 1990 GS ISO 1420 : 2001Ψ GS ISO 2286-2 : 1998Ψ GS ISO 4674-1 : 2003Ψ GS ISO 5978 : 1990Ψ GS 494 : 2008 GS ISO 2411 : 2000Ψ GS ISO 4919 : 1978Ψ GS ISO 6356 : 2000Ψ GS 821 : 2008 GS 927 : 2007 415 .20 59.30 59.40 59.30 59.30 59.080.080.01 59.080.080.080.30 59.01 59.080.40 59.30 59.30 59.30 59.ICS 59.080.080.080.99 59.40 59.080.30 59.080.20 59.080.080.60 59.080.080.080.080.30 59.30 59. 020 67.020 61.120.020 67.020 67.20 65.020 Standard Number GS 907 : 2008 GS ISO 3636 : 1977 GS ISO 8559 : 1989Ψ GS ISO TR 10652 : GS ISO 3635 : 1981Ψ GS ISO 4417 : 1977Ψ GS 37 : 1970 GS ISO 3638 : 1977Ψ GS ISO 3637 : 1977 GS ISO 4415 : 1981 GS 31 : 2008 GS ISO 4416 : 1981 GS 298 : 2007 GS 213 : 1998 GS ISO 17706 : 2003Ψ GS 844 : 2006 GS 314 : 2010 GS 312 : 2007 GS 147 : 2007 GS 106-2 : 1991(2005) GS 106-1 : 2007 GS 928 : 2008 GS ISO TS 22004 : 2005Ψ GS ISO 22000 : 2005Ψ GS CAC/RCP 53 : 2003Ψ GS 46 : 2004 GS 66 : 1990 GS CAC/GL 24 :1997Ψ GS CAC/GL 23 : 2004Ψ GS CAC/RCP 1.020 67.060 61.100.020 61.120.060.100.020 61.99 65.020 67.020 61.99 61.020 67.020 61.10 65.020 61.ICS 59.020 61. Rev.060 61.020 61.020 67.060 61.020 67.080.020 61.060 65. 4 : GS CAC/ GL 1:1991Ψ GS CAC/GL 2 : 2006Ψ GS CAC/GL 50 : 2004Ψ Page 60 161 236 275 161 179 2 161 161 179 2 179 24 18 271 57 26 26 11 9 9 61 276 273 65 3 4 64 64 65 64 64 64 416 .20 67. 67.020 67.020 61.020 67.020 61.10 65. ICS 67.230 67.060 67.060 67. 67. 67.050.020.040 67.040 67.050 67.060 67.060 67.230 67.020.120.10 67.120.060 67.060 67.060 Standard Number GS CODEX STAN GS CODEX STAN 1 : GS 210 : 2007 GS 68 : 1990 GS 67 : 1990 GS CODEX STAN 146 GS 300 : 2008 GS 762 : 2008 GS 150 : 2004 GS 237 : 2001 GS ISO 11050 : 1993Ψ GS 868 : 2008 GS 44 : 1973 GS 62 : 1990 (2005) GS 305-3 : 1997 GS 305-2 : 1997 GS 305-4 : 1997 GS 305-1 : 1997 GS 305-5 : 1997 GS 211 : 2003 GS 187 : 2004 GS ISO 21415-4 : 2006Ψ GS 948 : 2008 GS 735 : 2003 GS 921 : 2007 GS 731 : 2003 GS 883 : 2008 GS ISO 605 : 1991Ψ Page 69 65 17 5 4 70 25 51 12 21 256 58 3 4 25 25 25 25 26 18 15 273 63 47 61 47 58 114 47 47 221 209 22 GS 733 : 2003 GS 734 : 2003 GS ISO 7304 : 1985Ψ GS ISO 6644 : 2002Ψ GS 266 : 2003 417 . 67.240 67.060 67.050.060 67.20 67.67.050.050.080 67.120.10 67.060 67.220.040 67.040 67.200 67.060 67.160. 67.060 67.060 67.67.040 67.050 67.020.020:67.120.020:67.040 67.060 67.10 67.050.17.20 67.020.30 67.67. 67. 060 67.060 67.060 67.060 67.060 67.060 67.080 Standard Number GS 265 : 2001 GS ISO 7305 : 1998Ψ GS 579 : 2007 GS ISO 15141-2 : 1998Ψ GS 765 : 2003 GS 809 : 2006 GS 11 : 1970 GS 811 : 2006 GS 812 : 2006 GS 729 : 2003 GS 728 : 2003 GS 27 : 1970 GS ISO 2164: 1975Ψ GS 96 : 1990 (2005) GS 95 : 2004 GS ISO 6322-1:1996 GS ISO 6639-4 : 1987Ψ GS 574 : 2003 GS ISO 9648 : 1988Ψ GS ISO 16050 : 2003Ψ GS ISO 13690 : 1999Ψ GS ISO 6639-1 : 1996Ψ GS ISO 6639-2 : 1986Ψ GS 60 : 2005 GS ISO 6639-3 : 1986Ψ GS CODEX STAN 73 : GS 61 : 1990 GS 59 : 1997 (2005) GS ISO 14864 : 1998Ψ GS ISO 7973 : 1992Ψ GS ISO 21415-3 : 2006Ψ GS 576 : 2003 GS CODEX STAN 145 : Page 22 221 38 268 51 54 1 55 55 47 46 2 139 7 7 201 209 38 247 270 265 208 208 4 209 68 4 3 268 230 273 38 70 418 .060 67.060 67.ICS 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67.060 67. 080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.ICS 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 67.080 Standard Number GS CODEX STAN 79 : GS CODEX STAN 13 : GS CODEX STAN 16 : GS CODEX STAN 17 : GS 386 : 2003 GS CODEX STAN 38 : GS CODEX STAN 143 : GS CODEX STAN 40 : GS CODEX STAN 55 : GS CODEX STAN 56 : GS CODEX STAN 58 : GS CODEX STAN 60 : GS CODEX STAN 61 : GS CODEX STAN 62 : GS 758 : 2003 GS CODEX STAN 144 : GS 938 : 2008 GS 937 : 2008 GS 933 : 2008 GS 936 : 2008 GS 675 : 2007 GS CODEX STAN 66 : GS CODEX STAN 159 : GS CODEX STAN 68 : GS CODEX STAN 131 : GS CODEX STAN 116 : GS CODEX STAN 115 : GS CODEX STAN 81 : GS CODEX STAN 80 : GS CODEX STAN 18 : GS CODEX STAN 160 : GS 439 : 2003 GS 480 : 2003 Page 68 66 66 66 33 67 70 67 67 67 67 67 68 68 51 70 62 62 62 62 40 68 70 68 70 69 69 69 69 66 70 34 35 419 . 080 67.080.01 67.080 67.080.080.080 67.01 67.080.01 67.080 67.080 67.080 67.080 67.080.080.080 67.01 67.01 Standard Number GS 468 : 2003 GS 757 : 2003 GS 465 : 2003 GS CODEX STAN 39 : GS 485 : 2003 GS 447 : 2003 GS 466 : 2003 GS 433 : 2003 GS 428 : 2003 GS 417 : 2003 GS 410 : 2003 GS 405 : 2003 GS 401 : 2003 GS 461 : 2003 GS CODEX STAN 255 : GS 464 : 2003 GS CAC/RCP 2 : 1969Ψ GS 732 : 2003 GS 730 : 2003 GS 756 : 2003 GS CODEX STAN 99 : GS CODEX STAN 78 : GS 101 : 2004 GS ISO 2169 : 1981Ψ GS CODEX STAN 188 : GS ISO 1026 : 1982Ψ GS ISO 751 : 1998Ψ Page 35 51 34 67 35 34 35 34 33 33 33 33 33 34 72 34 65 47 47 50 69 68 8 140 71 123 119 140 119 119 191 120 118 GS ISO 2173 : 2003Ψ GS ISO GS ISO 762 : 2003Ψ 763 : 2003Ψ GS ISO 5520 : 1981Ψ GS ISO GS ISO 874 : 1980Ψ 750 : 1998Ψ 420 .080.080 67.080.080 67.080 67.01 67.080 67.01 67.080 67.01 67.080 67.080 67.080.080 67.080 67.080.01 67.01 67.080 67.080 67.01 67.080 67.080.080 67.ICS 67.080 67. 01 67.080.080.080.080.01 67.01 67.01 67.080.01 67.01 67.080.01 67.ICS 67.080.01 67.080.01 67.080.01 67.080.01 67.01 67.01 67.080.080.01 67.01 67.080.080.01 67.01 67.01 Standard Number GS ISO 2447 : 1998Ψ GS CODEX STAN 218 : GS CODEX STAN 197 : GS CODEX STAN 187 : GS ISO 2448 : 1998Ψ GS 604 : 2004 GS 588 : 2004 GS 546 : 2004 GS 545 : 2004 GS ISO 1842 : 1991Ψ GS 528 : 2004 GS CODEX STAN 205 : GS 926 : 2008 GS ISO 17240 : 2004Ψ GS ISO 5515 : 1979Ψ GS ISO 6558-2 : 1992Ψ GS ISO 6557-2 : 1984Ψ GS ISO 6557-1 : 1986Ψ GS 905 : 2007 GS ISO 6561-1 : 2005Ψ GS ISO 5518 : 2007Ψ GS ISO 17239 : 2004Ψ GS ISO 5523 : 1981Ψ GS ISO 5522 : 1981Ψ GS ISO 5521 : 1981Ψ GS ISO 5519 : 1978Ψ GS ISO 5517 : 1978Ψ GS ISO 5516 : 1978Ψ GS 922 : 2007 GS ISO 6636-1 : 1986Ψ GS ISO 6949 : 1988Ψ GS ISO 7466 : 1986Ψ GS ISO 7952 : 1994Ψ Page 144 71 71 71 144 39 38 37 36 135 36 71 61 270 190 205 205 205 59 205 191 270 191 191 191 191 190 190 61 208 214 223 230 421 .01 67.080.080.080.080.01 67.080.01 67.080.080.01 67.01 67.080.080.01 67.01 67.01 67.080.080.01 67.080.080.080.01 67.080.080.080.01 67.01 67.01 67.080.01 67.080.01 67. 100.080.01 67.080.20 67.080.01 67.20 67.100.01 67.080.01 67.01 67.100.01 67.01 67.080.080.080.01.080.10 67.100.080.01 67.20 67.01 67.20 67.01 67.080.10 67.080.20 67.67.100.20 67.100.10 67.01 67.01 67.100.01 67.01 67.100.080.080.080.100.080.080.20 67.080.080.080.10 67.30 67.01 67.01 67.ICS 67.01 67.080.10 Standard Number GS ISO 9526 : 1990Ψ GS ISO 6638-2 : 1984Ψ GS ISO 6637 : 1984Ψ GS ISO 6560 : 1983Ψ GS ISO 6636-2 : 1981Ψ GS ISO 6561-2 : 2005Ψ GS ISO 6635 : 1984Ψ GS ISO 6634 : 1982Ψ GS ISO 3659 : 1977Ψ GS ISO 6633 : 1984Ψ GS ISO 6632 : 1981Ψ GS ISO 6636-3 : 1983Ψ GS 313 : 2001 GS 212 : 2006 GS 824 : 2007 GS 49 : 2005 GS 858 : 2007 GS 915 : 2007 GS 560 : 2004 GS 533 : 2004 GS 8 : 1970 Page 246 208 208 205 208 205 207 207 162 207 207 208 26 18 56 3 57 60 37 36 1 21 3 194 232 133 133 210 233 118 218 134 242 GS 246 : 2004 GS 50 : 1973 GS ISO 5738 : 2004Ψ GS ISO 8262-1 : 2005Ψ GS ISO 1737 : 1999Ψ GS ISO 1736 : 2000Ψ GS ISO 6732 : 1985Ψ GS ISO 8262-2 : 2005Ψ GS ISO 707 : 1997Ψ GS ISO 7208 : 1999Ψ GS ISO 1740 : 2004Ψ GS ISO 8968-1 : 2001Ψ 422 .01 67.01 67.080.100.100.080.01 67.080. 10 67.30 67.100.100.100.100.100.10 67.20 67.10 67.10 67.10 67.100.100.100.20 67.10 67.10 67.10 67.10 67.100.100.100.10 67.100.10 67.100.100.100.10 67.20 67.10 67.10 67.100.10 67.100.10 67.10 67.100.100.10 67.100.100.100.10 67.ICS 67.100.100.100.10 67.20 67.10 67.10 67.100.20 67.100.30 Standard Number GS ISO 8070 : 2007Ψ GS 335 : 2003 GS ISO 6091 : 1980Ψ GS ISO 6092 : 1980Ψ GS 334 : 2003 GS ISO 8968-5 : 2001Ψ GS 336 : 2003 GS ISO 1211 : 1999Ψ GS ISO 6731 : 1989Ψ GS 278 : 2003 GS 98 : 2004 GS ISO 12080-1 : 2000Ψ GS ISO 14892 : 2002Ψ GS ISO 14377 : 2002Ψ GS ISO 12081 : 1998Ψ GS ISO 12080-2 : 2000Ψ GS ISO 3657 : 2002Ψ GS ISO 6734 : 1989Ψ GS ISO 3976 : 2006Ψ GS ISO 2446 : 1976Ψ GS ISO 5536 : 2002Ψ GS 380 : 2003 GS 378 : 2003 GS 340 : 2003 GS ISO 1738 : 2004Ψ GS ISO 3727-3 : 2003Ψ GS ISO 7238 : 2004Ψ GS ISO 3727-2 : 2001Ψ GS ISO 1739 : 2006Ψ GS ISO 3727-1 : 2001Ψ GS ISO 2920 : 2004Ψ GS 352 : 2003 GS 351 : 2003 Page 231 28 198 198 28 242 28 126 210 23 8 262 268 267 262 262 162 210 169 144 192 33 32 29 133 164 219 164 133 164 151 30 30 423 .30 67.100.100.100.10 67.20 67.20 67.100.100.100. 30 67.99 67.100.100.100.30 67.30 67.30 67.100.100.100.100.30 67.30 67.100.100.100.100.100.100.100.100.ICS 67.30 67.99 Standard Number GS ISO 3433 : 1975Ψ GS 354 : 2003 GS 350 : 2003 GS 357 : 2003 GS ISO 1735 : 2004Ψ GS 358 : 2003 GS 349 : 2003 GS 348 : 2003 GS 347 : 2003 GS 363 : 2003 GS 353 : 2003 GS ISO 5943 : 2006Ψ GS 371 : 2003 GS ISO 5534 : 2004Ψ GS 341 : 2003 GS 359 : 2003 GS 342 : 2003 GS 367 : 2003 GS 343 : 2003 GS ISO 1854 : 1999Ψ GS 345 : 2003 GS 346 : 2003 GS 344 : 2003 GS 564 : 2003 GS 370 : 2003 GS 100 : 2004 GS 355 : 2003 GS ISO 7328 : 1999Ψ GS ISO 3728 : 2004Ψ GS 64 : 2004 GS ISO 2450 : 1999Ψ GS 338 : 2003 GS 99 : 1990 Page 158 31 30 31 133 31 30 30 30 32 30 197 32 191 29 31 29 32 29 135 29 29 29 37 32 8 31 221 164 4 145 28 8 424 .30 67.30 67.100.100.30 67.40 67.30 67.100.40 67.100.30 67.100.30 67.40 67.100.100.30 67.100.100.100.30 67.30 67.100.100.30 67.40 67.30 67.30 67.30 67.30 67.30 67.30 67.100.100.100.30 67.69 67.100.30 67.40 67.100.100. 10 67.120.120.10 67.120.120.100.10 67.10 67.120.10 67.10 67.10 67.120.120.99 67.10 67.10 67.10 67.10 67.10 67.10 67.120.120.10 67.120. 67.10 67.99 67.ICS 67.10 67.10 67.10 67.10 67.120.120.120.120.10 67.120.120.120.10 67.120.120.10 67.10 67.120.120.020 Standard Number GS 337 : 2003 GS 339 : 2003 GS 301 : 2007 GS ISO 8381 : 2000Ψ GS 92 : 2005 GS 91 : 2003 GS 90 : 2003 GS ISO 4134 : 1999Ψ GS ISO 5554 : 1978Ψ GS 93 : 2008 GS 89 : 2008 GS ISO 13965 : 1998Ψ GS CAC/RCP 58 : 2005Ψ GS ISO 13493 : 1998Ψ GS ISO 13496 : 2000Ψ GS ISO 13730 : 1996Ψ GS 311 : 2003 GS ISO 1841-1 : 1996Ψ GS ISO 2917 : 1999Ψ GS ISO 936 : 1998Ψ Page 28 28 25 233 7 7 7 173 192 7 7 266 65 264 264 265 26 135 150 121 19 151 153 158 142 135 128 24 128 128 23 121 5 GS 224 : 2003 GS ISO 2918 : 1975Ψ GS ISO 3091 : 1975Ψ GS ISO 3496 : 1994Ψ GS ISO 2294 : 1974Ψ GS ISO 1841-2 : 1996Ψ GS ISO 1444 : 1996Ψ GS 288 : 2003 GS ISO 1442 : 1997Ψ GS ISO 1443 : 1973Ψ GS 274 : 2003 GS ISO 937 : 1978Ψ GS 70 : 1990 (2005) 425 .99 67.10 67.10 67.120.120.99 67.10.120.120.100.120.10 67.120.10 67.10 67.100.100.120.120. 140.140.30 67.140.30 67.30 67.10 67.120.10 67.30 67.120.30 67.10 67.120.140.140.30 67.10 67.10 67.120.140.120.120.30 67.140.30 67.30 67.10 Standard Number GS 745 : 2003 GS 744 : 2003 GS 754 : 2003 GS 755 : 2003 GS 750 : 2003 GS 929 : 2008 GS 749 : 2003 GS 751 : 2003 GS 748 : 2003 GS CODEX STAN 94 : GS FPR 1 : 2007Ψ GS 743 : 2003 GS 236 : 1997 GS 752 : 2003 GS 747 : 2003 GS 746 : 2003 GS 233 : 1997 GS 742 : 2003 GS 753 : 2003 GS 568 : 2002 GS ISO 1577 : 1987Ψ GS ISO 1839 : 1980Ψ GS ISO 7516 : 1984Ψ GS ISO 1575 : 1987Ψ GS ISO 1573 : 1980Ψ GS ISO 1572 : 1980Ψ GS ISO 9768 : 1994Ψ GS ISO 7513 : 1990Ψ GS ISO 1578 : 1975Ψ GS 572 : 2007 GS ISO 7514 : 1990Ψ GS ISO 3103 : 1980Ψ GS ISO 3720 : 1986Ψ Page 49 49 50 50 50 61 49 50 49 69 77 49 20 50 49 49 20 48 50 37 131 135 224 131 131 130 248 224 131 38 224 154 163 426 .10 67.140.120.30 67.10 67.30 67.120.140.ICS 67.120.120.30 67.120.120.30 67.120.120.30 67.120.140.10 67.30 67.10 67.30 67.30 67.140.30 67.140.120.10 67.30 67.10 67.120.140.120.120.10 67.120.30 67. 20 67.10 67.30 67.140.20 67.160.30 67.30 67.160.160.160.20 67.10 67.20 67.140.160.160.160.160.10 67.160.10 67.140.160.20 67.140.140.10 67.140.140.20 67.140.ICS 67.10 67.20 Standard Number GS ISO 1576 : 1988Ψ GS ISO 6770 : 1982Ψ GS ISO 10095 : 1992Ψ GS ISO 11292 : 1995Ψ GS ISO 10470 : 2004Ψ GS ISO 4052 : 1983Ψ GS ISO 6667 : 1985Ψ GS ISO 4149 : 2005Ψ GS ISO 11817 : 1994Ψ GS ISO 9116 : 2004Ψ GS ISO 6670 : 2002Ψ GS 739 : 2007 GS 740 : 2007 GS 736 : 2007 GS ISO 1114 : 1977Ψ GS ISO 2291 : 1980Ψ GS 738 : 2007 GS 547 : 2008 GS ISO 2292 : 1973Ψ GS 103 : 2004 GS 104 : 2004 GS 102 : 2004 GS 931 : 2008 GS 155 : 2004 GS 854 : 2007 GS 65 : 2005 GS 855 : 2007 GS 590 : 2007 GS 169 : 2004 GS 711 : 2003 GS 710 : 2003 GS 707 : 2003 GS 712 : 2003 Page 131 210 251 260 253 172 209 173 261 244 209 48 48 48 124 142 48 37 142 8 8 8 61 12 57 4 57 38 13 44 44 43 44 427 .20 67.140.30 67.10 67.10 67.30 67.20 67.20 67.140.10 67.30 67.140.10 67.160.10 67.30 67.160.140.160.10 67.20 67.140.140.140.140.20 67.140.30 67.140.20 67.160.140. 160.20 67.20 67.20 67.160.160.160.20 67.20 Standard Number GS 713 : 2003 GS 709 : 2003 GS 714 : 2003 GS 720 : 2003 GS 715 : 2003 GS 721 : 2003 GS 716 : 2003 GS 717 : 2003 GS 718 : 2003 GS 719 : 2003 GS 168 : 1995 (2005) GS 725 : 2003 GS 6 : 1970 Page 44 44 44 45 45 45 45 45 45 45 13 46 1 46 140 2 46 43 15 46 44 43 46 17 21 43 46 65 57 71 160 134 167 GS 727 : 2003 GS ISO 2172 : 1983Ψ GS 20 : 1970 GS 726 : 2003 GS 706 : 2003 GS 176 : 1999 GS 723 : 2003 GS 708 : 2003 GS 705 : 2003 GS 722 : 2003 GS 201 : 2003 GS 239 : 2001 GS 704 : 2003 GS 724 : 2003 GS CODEX STAN 12 : GS 856 : 2007 GS CODEX STAN 212 : GS ISO 3593 : 1981Ψ GS ISO 1742 : 1980Ψ GS ISO 3946 : 1982Ψ 428 .20 67.20 67.160.20 67.20 67.180.20 67.180.20 67.20 67.160.160.160.20 67.20 67.160.ICS 67.160.160.160.20 67.160.160.160.160.160.20 67.160.20 67.180.20 67.20 67.180.20 67.10 67.20 67.160.20 67.20 67.10 67.160.20 67.160.180.20 67.160.180.20 67.20 67.160.160.20 67.160.20 67.160.160.20 67.10 67. 20 67.20 67.180.10 67.20 67.10 67.200.20 67.180.20 67.200.20 67.20 67.190 67.180.20 67.180.20 67.10 Standard Number GS ISO 11212-1 : 1997Ψ GS ISO 11212-2 : 1997Ψ GS ISO 5378 : 1978Ψ GS ISO 11212-3 : 1997Ψ GS ISO 5810 : 1982Ψ GS ISO 5381 : 1983Ψ GS ISO 1741 : 1980Ψ GS ISO 5809 : 1982Ψ GS 584 : 2003 GS ISO 3947 : 1977Ψ GS ISO 10504 : 1998Ψ GS ISO 3188 : 1978Ψ GS ISO 1743 : 1982Ψ GS 256 : 2003 GS ISO 5377 : 1981Ψ GS 676 : 2004 GS ISO 5379 : 1983Ψ GS ISO 1666 : 1996Ψ GS 741 : 2007 GS 737 : 2007 GS ISO 661 : 2003Ψ Page 260 260 188 260 196 189 134 196 38 168 254 155 134 22 188 40 188 133 48 48 115 200 203 200 17 66 192 17 201 63 63 227 121 GS ISO 6320 : 2000Ψ GS ISO 6463 : 1982Ψ GS ISO 6312 : 2001Ψ GS 202 : 2001 GS CODEX STAN 33 : GS ISO 5558 : 1982Ψ GS 203 : 2001 GS ISO 6321 : 2002Ψ GS 956 : 2008 GS 953 : 2008 GS ISO 7847 : 1987Ψ GS ISO 935 : 1988Ψ 429 .20 67.180.20 67.10 67.200.10 67.180.200.20 67.200.200.10 67.10 67.180.180.200.20 67.180.180.20 67.20 67.200.10 67.10 67.200.180.200.180.180.180.180.10 67.20 67.180.200.200.180.200.ICS 67.20 67.10 67.20 67.10 67.180.190 67.10 67. CATALOGUE OF GHANA STANDARDS © GSA 2012 GSA CATALOGUE UNDER REVIEW IN NUMERICAL ORDER . 20 2 Pages The standard specifies requirement for canned orange juice and includes essential composition and quality factors.20 Specification for Canned Pepper Puree Gr 1 4 Pages This standard gives the product description. hygiene.01 Sampling methods for Milk and Milk Products Gr 1 9 Pages Procedures are described for sampling milk and milk products to obtain from a unit ( e.160. Bulk containers . materials to use and the procedure ________________________________________________________________________________________________________________ GS 5 : 1970 67.100.160.Methods of Analysis Gr 2 14 Pages This Ghana Standards specifies reference methods for the chemical analysis of milk and milk products.080. Gr 1 8 Pages This Ghana Standard prescribes the methods of sampling and test for canned pineapple. ________________________________________________________________________________________________________________ GS 15 : 1970 Specification for Canned Orange Juice Gr 1 67. quality factors. ________________________________________________________________________________________________________________ GS 13 : 1970 Specification for Canned Fruit Cocktail Gr 1 67.100.) a portion (sub-sample) which is as representative of that unit ________________________________________________________________________________________________________________ GS 7 : 1970 67.20 6 Pages The standard specifies requirements for canned fruit cocktail. ________________________________________________________________________________________________________________ GS 9 : 1970 67. ________________________________________________________________________________________________________________ GS 16 : 1970 67. food additives.01 Milk and Milk Products .30 Specification for Smoked Fish Gr 1 3 Pages The standard gives requirements and methods of sampling and test for smoked fish 431 .080.080 Specification for Canned Pineapple. ________________________________________________________________________________________________________________ GS 10 : 1970 67.CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 3 : 1970 67.080 Canned Garden Eggs and Okro (Okra) Gr 1 6 Pages This Ghana Standard specifies the requirements and methods of sampling and test for canned garden eggs and okro (okra). labelling etc that makes the product meet specified requirements ________________________________________________________________________________________________________________ GS 4 : 1970 67. small retail containers etc.120.01 Methods of Sampling and Analysis for Processed Fruits and Vegetables Gr 2 11 Pages It gives the methods of analysis for fruits and vegetables. Includes essential composition and quality factors.g. ________________________________________________________________________________________________________________ GS 24 : 1970 Specification for Canned Yams Gr 1 67. ________________________________________________________________________________________________________________ GS 18 : 1970 Specification for Canned Mango Juice Gr 1 67.CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 17 : 1970 Specification for Canned Lemon Juice Gr 1 67. quality factors and contaminants. ________________________________________________________________________________________________________________ GS 26 : 1970 Specification for Canned Grape Fruit Gr 1 This standard specifies requirements for packaging of canned grape fruit.160. quality factors.Specification for Safety requirements for mains-operated Domestic Sound and Vision Equipment.20 2 Pages Specifies requirements for lemon juice and includes essential composition and quality factors. ________________________________________________________________________________________________________________ GS 21 : 1970 Specification for Canned Garden Eggs Gr 1 67.080 97.79 83 Pages This glossary defines terms used in Ghanaian timber standards including plywood standards and gives the definition of each term. 030 5 Pages This Ghana Standard specifies requirements and methods of test for canned garden eggs and includes essential composition. 51 Pages Gr 6 This standard specifies safety requirements for apparatus that is to be connected to the mains.080 Specification for Canned Okro Gr 1 5 Pages This standard specifies requirement for canned okro [okra] ________________________________________________________________________________________________________________ 432 . either directly or indirectly. ________________________________________________________________________________________________________________ GS 19 : 1970 Electrical Appliances and Accessories .080 5 Pages GS 28 : 1970 67. 67. ________________________________________________________________________________________________________________ GS 23 : 1970 Glossary of terms Relating to Timber and Woodwork Gr 9 01. intended for domestic and similar general indoor use and not subjected to dripping or splashing.160.250 4 Pages This standard specifies requirements for canned yams.040.20 2 Pages It specifies requirements for canned mango juice and includes essential composition. dimensions including tolerances and finish for corrugated and troughed aluminium sheet for roofing. 61.150. ________________________________________________________________________________________________________________ GS 35 : 1970 Size Measurements for Men's Ready Made Trousers Gr 1 61.020 3 Pages This Standard specifies requirement size measurement for men's ready made trousers.080 Specification for Canned Two Fruits/ Canned Fruits Mixture Gr 1 6 Pages This specification deals with measures for packaging two canned fruits mixture ________________________________________________________________________________________________________________ GS 47 : 1973 Specification for Mayonnaise Gr 1 This standard deals with requirement for Mayonnaise ________________________________________________________________________________________________________________ 67.20 96 Pages Gr 10 This specification deals with conductors in electric power cables ________________________________________________________________________________________________________________ GS 41 : 1971 Specification for A.10 3 Pages 433 .CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 29 : 1970 Specification for Canned Leafy Greens Gr 1 67. ________________________________________________________________________________________________________________ GS 30 : 1970 Specification for Aluminium Building Sheets Gr 1 77.01 10 Pages This standard covers capacitor and non-capacitor type pedestal fan.C circuit at voltages not exceeding 250v suitable for normal domestic and similar uses.C. Insulated and Sheathed Cables (for Voltages up to 1100v) with Copper and Aluminium Conductors 29. ________________________________________________________________________________________________________________ GS 45 : 1973 67. oscillating or non-oscillating and their associated regulators intended for use on single phase A.100.220.080 5 Pages This standard specifies requirement for canned leafy greens.10 10 Pages This standard lists the material.060. ________________________________________________________________________________________________________________ GS 36 : 1970 Textiles-Measurements for Ordinary Ready Made Men's Shirts Gr 1 This standard deals with minimum measurements of boys and men's shirts.020 6 Pages ________________________________________________________________________________________________________________ GS 38 : 1971 Specification for P.V.C Electric Pedestal Type Fans and Regulators Gr 1 29. These requirements cover production. 67.120. processing.CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 51 : 1973 Specification for Baker's Yeast Dried and Compressed Gr 1 This standard specifies requirement for baker's yeast dried and compressed ________________________________________________________________________________________________________________ GS 53 : 1978 Specification for Bedsheets and Pillow Cases Gr 1 97.100.Code of Hygienic Practice Gr 1 67.060 2 Pages 6 Pages It specifies the requirement and methods of sampling and test for bed sheets and pillow-cases made from woven cotton fabrics ________________________________________________________________________________________________________________ GS 56 : 1978 Textiles. Gr 1 67.01 9 Pages This code of practice specifies the requirements of general hygiene and technological practices for use in the manufacture of milk and milk products. It also specifies a method for sample preparation and a qualitative method for determination of presence of synthetic anionic-surface active agents ________________________________________________________________________________________________________________ 434 .Enumeration of Micro Organisms. storage and transportation of milk and milk products. ________________________________________________________________________________________________________________ GS 71 : 1990 Soaps and Detergents .10. rubber thread and continuous filament rayon and rubber thread and continuous filament nylon.Specification for Elastic Braid Gr 1 59. ________________________________________________________________________________________________________________ GS 63 : 1990 Milk and Milk Products . The code also specifies microbiological criteria and end product specifications for milk and milk products ________________________________________________________________________________________________________________ GS 69 : 1990 Meat and Meat Products.40 24 Pages This standard specifies methods of analysis for the determination of conformance of various soap products to the requirements as laid down in various Ghana Standard specifications specific for soap. packaging.160 67.060 5 pages This standard specifies the quality requirements and methods of test for flat and tubular tagged shoe and boot laces made from cotton yarn. ________________________________________________________________________________________________________________ GS 58 : 1978 Standard Specification for Tagged Cotton Shoe and Boot laces Gr 1 61.060 7 Pages The standard specifies requirements of performance and physical properties of elastic braids manufactured from rubber thread and cotton.100.020 4 Pages This Ghana standard specifies the method for the enumeration of micro organisms present in meat and meat products by counting the colonies growing in a solid medium after incubating aerobically at 30 degrees celcius.Methods of test for Soaps Gr 3 71. International Standard Book Number (ISBN) Gr 1 3 Pages The standard co-ordinates and standardize internationally the use of book numbers so that an international standard book number identifies one title. ________________________________________________________________________________________________________________ 435 .140.10.120.20 9 Pages This Ghana Standard provides guidelines on essential information provided on the title leaves of a book.020 67.160 Tobacco and Tobacco Products . chilled and frozen Pork ________________________________________________________________________________________________________________ GS 93 : 1990 Meat and Meat Product. but does not cover the requirements for flavour and aroma of cigarette ________________________________________________________________________________________________________________ GS 105-2 : 1992 Tobacco and Tobacco Products. particulate or agglomerate form such as flour ________________________________________________________________________________________________________________ GS 105-1 : 1992 65.Title leaves of a Book Gr 1 01. 35.160 25 Pages The standard prescribes methods of test for tobacco and tobacco products.10 4 Pages It specifies the requirements and methods of sampling and test for meat product designated as "Luncheon Meat " ________________________________________________________________________________________________________________ GS 97 : 1990 Methods of Sampling for Milled Cereal.20.Part 2 . from one specific publisher and is unique to that title or edition.120. To this end.Method of Sampling Gr 1 67.240. pulse and oil-seed products in powder.120. Chilled and Frozen Pork 7 Pages Gr 1 Specifies requirements and methods of sampling and test for fresh.10 4 Pages It specifies the methods for sampling meat and meat products ________________________________________________________________________________________________________________ GS 94 : 1990 Meat and Meat Products . and the manner in which the information should be presented.International Standard Serial Number (ISSN) Gr 1 01.Part 1 .CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 89 : 1990 Meat and Meat Products .Specification for Cigarette Gr 1 6 Pages This standard details with the specification for cigarette and the methods for sampling procedure required to ensure compliance to the standard. it specifies the construction of an international standard book number and the location of the printed number on the book ________________________________________________________________________________________________________________ GS 108 : 1990 Documentation .30 Documentation .Specification for Fresh.140. Pulse and Oil-Seed Products Gr 1 67.140.Methods of test for Cigarette Gr 3 65. 67.060 5 Pages This standard specifies the methods of sampling for milled cereal. It does not cover the determination of flavour and aroma of cigarettes and tobacco products ________________________________________________________________________________________________________________ GS 107 : 1990 01.20 4 Pages This standard defines and promotes the use of a standard code ISSN for the unique identification of serial publications ________________________________________________________________________________________________________________ GS 109 : 1990 Documentation .Specification for Luncheon Meat Gr 1 67. or edition of a title. 140. type face. print area. paper and binding ________________________________________________________________________________________________________________ GS 112 : 1991 Documentation .20 7 Pages The standard gives guidelines for the preparation and presentation of contributions to periodicals ________________________________________________________________________________________________________________ GS 119 : 1990 Paper and Paper Products.CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 110 : 1990 Documentation. folio. leading.20 Documentation . The element include the format.20 3 Pages 01.paper and binding ________________________________________________________________________________________________________________ GS 114 : 1991 01. illustration. margin.080 16 Pages 12 Pages This standard lists requirements and methods of sampling and test for moulded chalk. type face. commonly used in schools. Gr 1 7 Pages This standard sets out rules to guide and assist designers.180 85.140.Guidelines for Preliminary Pages and End Matter of a Book.Guide for Designing Books for the Primary School Child between ages 6 and 11 2 Pages Gr 1 It gives guidance on the elements for the design of books for primary school child. The standard applies to chalk manufactured from calcined gypsum base ________________________________________________________________________________________________________________ 436 .20 01. print area. point size.140.Guidelines for Designing Books for the Pre-School Child Gr 1 2 Pages This standard gives guidelines on the elements for the design of books for the pre-school child.glossary. methods of sampling and test for paper stationery items for schools ________________________________________________________________________________________________________________ GS 120 : 1990 Writing Aids. leading. 6 Pages Gr 1 It provides guidelines for the preliminary pages and end matter of a book and the manner in which they should be presented. print area. ________________________________________________________________________________________________________________ GS 115 : 1992 Guidelines for the Preparation of Contributions to Periodicals Gr 1 01.Guidelines for Format and Presentation of Periodicals. ________________________________________________________________________________________________________________ GS 111 : 1991 01.20 01. illustration.Specification for School Chalk Gr 2 97. typeface. illustration. indentation.Specification for Paper Stationery Items for Schools.140. point size.140. Gr 2 It specifies the requirements. editors and publishers in the presentation of a periodical. The elements include the format. paper and binding ________________________________________________________________________________________________________________ GS 113 : 1992 Documentation .Guide for Designing Books for the Post-Primary School Child between ages 12 and 17 Gr 1 This standard provides guidelines for designing books for post primary reading and include elements such as format.140.20 Documentation . point size. 99 3 Pages This Ghana Standard specifies requirements for seamless socks knitted in plain.20 Textiles .70 7 Pages The standard specifies the requirements and methods of sampling and test for skin powders. or fancy stitches from continuous filament Nylon yarn.080.100.40 5 Pages This standard specifies the requirements and methods of sampling and test for medicated soap ________________________________________________________________________________________________________________ GS 133 : 1990 Specification for skin powders Gr 1 71. 97. ________________________________________________________________________________________________________________ GS 127 : 1991 59. synthetic and blends of cellulosic and synthetic fibres. rib. such as breaking load.Specification for medicated soap Gr 1 71.080. colour fastness and dimensional stability.Specification for Liquid Soap Gr 1 71.30 5 Pages This Ghana standard specifies requirements for the basic performance properties of knitted fabrics made from cellulosic.CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 121 : 1990 Specification for nylon Socks Gr 1 59.080. It does not give the constructional details such as number of ends in full width of wick. namely body powders and face powders. and the linear density of yarn. It does not cover products such as shampoo and liquid detergents intended for specific purposes. dyed or printed cotton fabrics for bedclothes. ________________________________________________________________________________________________________________ GS 123 : 1990 Textiles .Specification for Cotton Fabrics for Bedclothes Gr 1 5 Pages This standard specifies the requirements for bleached.100.100. This standard does not cover skin powder for infants and special medicated powders for which therapeutic claims are made ________________________________________________________________________________________________________________ 437 .Specification for Knitted Apparel Fabrics Gr 1 59. The standard deals with the properties which relate to the performance of the fabric in use.160 Textiles . ________________________________________________________________________________________________________________ GS 129 : 1991 Soaps and Detergents .40 6 Pages This standard specifies the requirements and methods of sampling and test for carbolic soap for domestic purposes ________________________________________________________________________________________________________________ GS 132 : 1990 Soap and detergents . It applies to flat cotton wicks of 6mm to 25mm width for huricane lanterns and lamp ________________________________________________________________________________________________________________ GS 128 : 1991 59.40 5 Pages The standard specifies the requirements and methods of sampling and test for liquid soap for general purpose cleaning.Specification for Flat Cotton Wicks for Lanterns Gr 1 8 Pages It specifies the requirements of the performance properties of flat wicks as well as the method of test determining the requirements. ________________________________________________________________________________________________________________ GS 130 : 1990 Soaps and Detergent .Specification for Carbolic Soap Gr 1 71.080.100.01. ________________________________________________________________________________________________________________ GS 139:1990 Specification for masonry cement.240.180 71. It does not specify the composition of the match head and friction surface. Gr 1 It gives the requirements for building limes used for construction purposes ________________________________________________________________________________________________________________ GS 138 : 1992 Building and construction materials . ________________________________________________________________________________________________________________ GS 136-2 : 1990 Packaging . methods of sampling and test for safety wood matches in boxes.100. six classes of zinc coating and two classes of aluminium/zinc coating. Provision is made for six grades of base steel in structural grades according to their mechanical properties. 91.100.160 8 Pages This Ghana Standard specifies requirements for cartons for use for packaging fresh pineapples.15 6 Pages ________________________________________________________________________________________________________________ GS 144 : 1992 Specification for Cross arms.10 18 Pages 77. ________________________________________________________________________________________________________________ GS 137 : 1990 Building and construction materials.Methods of test for skin powders. provision has also been made for variety of surface finishes. It defines the performance characteristics of the splints. transmission timbers and pole key for overhead power and telecommunication lines.Test for arsenic Gr 1 It specifies the method for determination of arsenic in powders ________________________________________________________________________________________________________________ GS 135 : 1990 Specification for safety wood matches in boxes Gr 2 97.CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 134 : 1991 Cosmetics.150.100.70 2 Pages 16 Pages This Ghana Standard specifies functional requirements.Specification for building lime.10 11 Pages 91. match box and friction surface.Specification for aluminium /zinc coated corrugated sheets Gr 2 This standard specifies requirements for 76mm pitch corrugated steel sheet manufactured from hot-dipped zinc-coated steel sheet.Specification for cartons for packaging pineapples Gr 1 55. ________________________________________________________________________________________________________________ 438 . Transmission Timbers and Pole Keys for Overhead Power and Telecommunication lines Gr 1 29. Gr 2 Specifies the requirements methods of sampling and test for masonry cement. type of wood used for the splints nor the material used for the match box.20 6 Pages This standard list the requirements for wood crossarms. CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 149 : 1990 Textiles- Specification for Blankets made from Waste/Recycled Fibre Gr 1 97.160 4 Pages This standard specifies the requirements of the performance properties of blankets woven from recycles waste fibre. It also specifies test methods determining the requirements of this specification ________________________________________________________________________________________________________________ GS 158 : 1995 91.100.30 Specification for Fibre and Micro concrete Roofing Tiles and Fittings Gr 2 12 Pages It lists the requirements and methods of sampling and test for fibre and micro concrete roofing tiles and fittings ________________________________________________________________________________________________________________ GS 159 : 1995 Specification for Cotton Dress Material Gr 1 59.080.30 5 Pages Specifies the requirements for plain woven cotton materials suitable for making up into lightweight apparel. The standard does not specify the constructional requirements for the base material. Only the performance requirements of the finished products are specified ________________________________________________________________________________________________________________ GS 161 : 1995 59.080.30 Specification for Woven Cotton Drill Gr 1 5 Pages The standard specifies the performance requirements for woven cotton drill. It does not specify constructional details for woven drill ________________________________________________________________________________________________________________ GS 162 : 1995 Specification for Cotton Shirting Suitable for School Uniforms Gr 1 59.080.30 5 Pages It specifies the performance for two types of dyed cotton shirting suitable for uniform for first-cycle schools, but does not specify constructional details of the fabrics. ________________________________________________________________________________________________________________ GS 164 : 1995 59.080.30 Specification for Cotton Flannelette Dusters Gr 1 3 Pages This standard specifies the performance requirements of cotton flannelette dusters. The standard, however does not specify the constructional details of flannelette duster. ________________________________________________________________________________________________________________ GS 166 : 1995 Documentation – Guide for Designing Books for Adults Gr 1 01.140.20 7 Pages This standard provides guidelines for the design and typography of books for adults. The standard deals with minimum requirements in view of the wide variations in publishing for adults. ________________________________________________________________________________________________________________ GS 170 : 1996 55.160 Packaging- Specification for Corrugated Fiberboard Boxes Gr 2 20 Pages Specifies the strength requirements, methods of sampling and testing of corrugated fiberboard material and boxes with maximum mass of its contents up to 75kg ________________________________________________________________________________________________________________ GS 171 : 1996 55.080 Paper and Paper Products- Specification for Correspondence Envelopes Gr 1 7 Pages It lists requirements, dimensions, methods of sampling and testing for correspondence envelopes intended for postal purposes including window-faced ones ________________________________________________________________________________________________________________ 439 CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 175 pt.3 : 1993 Specification for drinking water Part 3 - Methods for determining the chemical characteristics of drinking water Gr 3 This Ghana standard specifies test methods for determining the chemical (organic and inorganic) constituents of drinking water. ________________________________________________________________________________________________________________ GS 177 : 1996 67.120.30 Specification for lobsters and lobster products Gr 2 13.060.20 30 Pages 17 Pages The standard specifies the requirements and methods of sampling and test for live, quick frozen raw rock lobsters and quick frozen cooked rock lobsters. ________________________________________________________________________________________________________________ GS 178 : 1996 Fish and fishery products- Specification for shrimps/prawns Gr 2 67.120.30 14 Pages Specifies the requirements, methods of sampling and test for clean, wholesome, fresh, frozen, raw or cooked shrimps/ prawns ________________________________________________________________________________________________________________ GS 183 : 1996 Specification for liquid wax floor polish Gr 1 97.080 6 Pages It specifies the requirements and methods of sampling and test for wax-solvent and wax-emulsion types of liquid wax polish suitable for general application to floor surfaces ________________________________________________________________________________________________________________ GS 184 : 1996 97.080 Polishes - Specification for paste wax floor polish Gr 1 5 Pages It prescribes the requirements and methods of sampling and test for wax-solvent and emulsion types of paste floor polishes suitable for general application to floor surfaces. ________________________________________________________________________________________________________________ GS 185 : 1996 29.140.40 Specification for candle for domestic use Gr 1 5 Pages The standard specifies the requirements and methods of sampling and test for paraffin wax household candles. It does not apply to ornamental candles, birthday candles or other special purpose candles ________________________________________________________________________________________________________________ GS 195 : 1997 97.140 Furniture - Specification for rattan furniture. Gr 1 8 Pages Specifies the performance requirements and methods of sampling and test of rattan furniture. ________________________________________________________________________________________________________________ GS 199 : 1996 Specification for capacity measure for dispensing draught beer Gr 1 67.160.10; 17.060 3 Pages It specifies the requirements for capacity line measures used for trade purposes for measuring and serving draught beer. ________________________________________________________________________________________________________________ GS 207 : 1997 Specification for canned tuna and tuna products Gr 2 This standard specifies the requirements for canned tuna and tuna products ________________________________________________________________________________________________________________ 67.120.30 17 Pages 440 CATALOGUE OF GHANA STANDARDS © GSA 2012 GSB Catalogue under review in Numerical Order ___________________________________________________________________________________ GS 231 : 1997 Fish and fishery products- Code of practice for handling, freezing and storage of fish on board fishing vessels. 11 Pages Gr 2 This standard gives the technological guidelines and the most essential requirements of hygiene for the handling of fresh and frozen fish at sea. ________________________________________________________________________________________________________________ GS 232 : 1997 Fish and fishery products- Code of practice for processing of fresh and frozen fish 30 Pages Gr 3 It gives guidelines for the processing of fresh and frozen fish. The guidelines may be applied to form the basis of quality control and inspection procedures for such fish processing operations and are intended for use by personnel working in the industry as well as by inspectors from government agencies ________________________________________________________________________________________________________________ GS 233 : 1997 Fish and fishery products- Code of practice for holding and handling of live lobsters Gr 2 This standard contains technological guidelines and essential requirements of hygiene for holding and handling of lobsters on shore. It applies to lobsters, rock lobsters, spiny lobsters and slipper lobsters from the genus Homarus of the family Nephropidae and from the families palinuridae and scyllaridae intended for human consumption ________________________________________________________________________________________________________________ GS 234 : 1997 Fish and fishery products- Code of practice for the processing of canned fish 27 Pages Gr 3 This code of practice contains technological guidelines for the processing of canned fish. It may be applied to form the basis of quality control and inspection procedures for fish canning operations, and are intended for use by personnel working in the fish canning industry, as well as by inspectors from government agencies ________________________________________________________________________________________________________________ GS 235 : 1997 Fish and fishery products- Code of practice for processing of dried and smoked fish 20 Pages Gr 2 This standard contains technological guidelines for the processing of dried and smoked fish ________________________________________________________________________________________________________________ GS 236 : 1997 Fish and fishery products- Code of practice for quality control systems for the production of fishery products 13 Pages Gr 2 This code of practice gives advice on the systems based on the Harzard Analysis and Critical Control Point principle for the production of fishery products for human consumption. ________________________________________________________________________________________________________________ GS 314 : 1979 65.060.99 Agricultural implements- Specification for matchets Gr 1 7 Pages Specifies the requirements and tests for matchets mostly used for clearing bush and cutting trees and for other suitable agricultural operations. 67.120.30 67.120.30 67.120.30 67.120.30 15 Pages 67.120.30 67.120.30 ___________________________________________________________________________________________________ 441 CATALOGUE OF GHANA STANDARDS © GSA 2012 ALPHABETICAL SUBJECT INDEX TO STANDARDS UNDER REVIEW 442 CATALOGUE OF GHANA STANDARDS © GSA 2012 Subject Aluminium Products - Aluminium/Zinc Coated Corrugated Sheets Aluminium Products - Building Sheets Beverages - Alcoholic Beverages - Capacity measure for dispensing draught beer Beverages - Non-Alcoholic Beverages - Orange Juice Cables - Aluminium Conductors Cereals, Pulses and Derived Products - Baker's Yeast Dried and Compressed Cereals, Pulses and Derived Products - Methods of Sampling for Milled Cereals Construction Materials - Building Lime Construction Materials - Fibre and Micro Concrete Roofing Tiles and Fittings Construction Materials - Masonry Cement Cosmetics - Methods of Test for Skin Powders Cosmetics - Skin Powders Documentation - Designing Books for Adults Documentation - Designing Books for the Post-Primary School Child Documentation - Designing Books for the Pre-school Child Documentation - Designing Books for the Primary School Child Documentation - Format and Presentation of Periodicals Documentation - International Standard Book Number Documentation - International Standard Serial Number Documentation - Preliminary Pages and End Matter of a Book Documentation - Preparation of Contribution to Periodicals Documentation - Title Ieaves of a Book Electrical Appliances - Domestic Sound and Vision Equipment Electrical Appliances - Fans and Regulators Fish and Fishery Products - Canned Tuna Fish and Fishery Products - Live Lobsters Fish and Fishery Products - Lobsters Fish and Fishery Products - Quality Control Systems Fish and Fishery Products - Shrimps/Prawns Floor Treatment Appliances - Liquid Wax Floor Polish Floor Treatment Appliances - Paste Wax Floor Polish Food Products - Canned Yams Standard Number GS 138 : 1992 Ed. 1 GS 30 : 1970 Ed. 1 Page 409 404 411 402 404 405 406 409 410 409 409 408 410 407 407 407 407 407 406 407 407 406 403 404 411 412 411 412 411 411 411 403 GS 199 : 1996 Ed. 1 GS GS GS GS 15 : 1970 Ed. 1 38 : 1971 Ed. 1 51 : 1973 97 : 1990 Ed. 1 GS 137 : 1990 Ed. 1 GS 158 : 1995 Ed. 1 GS 139 : 1990 GS 134 : 1991 Ed. 1 GS 133 : 1990 Ed. 1 GS 166 : 1995 Ed. 1 GS 113 : 1992 Ed. 1 GS 111 : 1991 Ed. 1 GS 112 : 1991 Ed. 1 GS 114 : 1991 Ed. 1 GS 107 : 1990 Ed. 1 GS 108 : 1990 Ed. 1 GS 110 : 1990 Ed. 1 GS 115 : 1992 Ed. 1 GS 109 : 1990 Ed. 1 GS GS 19 : 1970 Ed. 1 41 : 1971 Ed. 1 GS 207 : 1997 Ed. 1 GS 233 : 1997 GS 177 : 1996 Ed. 1 GS 236 : 1997 Ed. 1 GS 178 : 1996 Ed. 1 GS 183 : 1996 Ed. 1 GS 184 : 1996 Ed. 1 GS 24 : 1970 Ed. 1 443 CATALOGUE OF GHANA STANDARDS © GSA 2012 Subject Footwear - Tagged Cotton Shoe and Boot Laces Fruits and Vegetables - Canned Fruits and Canned Fruits Mixture Fruits and Vegetables - Canned Grape Fruit Fruits and Vegetables - Canned Leafy Greens Fruits and Vegetables - Canned Okro Fruits and Vegetables - Canned Pepper Puree Fruits and Vegetables - Garden Eggs Fruits and Vegetables - Garden Eggs and Okro Fruits and Vegetables - Pineapple Luminaires - Candles Meat and Meat Products - Luncheon Meat Packaging - Cartons for Packaging Pineapples Packaging - Corrugated Fibreboard Boxes Paper Products - Correspondence Envelopes Paper Products - Paper Stationery Items for Schools Standard Number GS GS GS GS GS GS GS GS GS 58 : 1978 Ed. 1 45 : 1973 Ed. 1 26 : 1970 Ed. 1 29 : 1970 Ed. 1 28 : 1970 Ed. 1 3 : 1970 Ed. 1 21 : 1970 9 : 1970 Ed. 1 10 : 1970 Ed. 1 Page 405 404 403 404 403 402 403 402 402 411 406 409 410 410 407 GS 185 : 1996 GS 94 : 1990 Ed. 1 GS 136 : 1990 Ed. 1 GS 170 : 1996 Ed. 1 GS 171 : 1996 Ed. 1 GS 119 : 1990 Ed. 1 Plastic and Plastic Products - Ball Point Pen Refills Safety Wood Matches in Boxes School Chalk Soaps and Detergents - Carbolic Soap Soaps and Detergents - Liquid Soap Soaps and Detergents - Medicated soap Soaps and Detergents - Methods of Test for Soaps Spices and Condiments - Mayonnaise Textiles - Bedsheets and Pillow Cases Textiles - Blankets Textiles - Cotton Dress Material Textiles - Cotton Fabrics for Bedclothes Textiles - Cotton Flannelette Dusters Textiles - Cotton Shirting Suitable for School Uniforms Textiles - Elastic Braid Textiles - Knitted Apparel Fabrics Textiles - Men's Ready Made Shirts GS 221 : 1990 GS 135 : 1990 Ed. 1 GS 120 : 1990 Ed. 1 GS 130 : 1990 Ed. 1 GS 129 : 1991 Ed. 1 GS 132 : 1990 Ed. 1 GS GS GS 71 : 1990 Ed. 1 47 : 1973 53 : 1978 Ed. 1 411 409 407 408 408 408 405 404 405 410 410 408 410 410 405 408 404 GS 149 : 1990 Ed. 1 GS 159 : 1995 Ed. 1 GS 128 : 1991 Ed. 1 GS 164 : 1995 Ed. 1 GS 162 : 1995 Ed. 1 GS 56 : 1978 Ed. 1 GS 123 : 1990 Ed. 1 GS 36 : 1970 Ed. 1 444 Subject Wood and Wood Products - Plywood - Bond Quality Wood and Wood Products - Plywood - General Wood and Wood Products - Plywood - Vocabulary Wood and Wood Products - Quality Control Wood and Wood Products - Timber and Sawn Logs - Wood Poles - Eucalyptus Poles Wood and Wood Products - Timber and Sawn Logs - Wood Poles - Pine Poles Wood and Wood Products - Wood Technology - Wooden Doors Wood and Wood Products - Wood Technology - Wooden Frames for Doors, Windows and Standard Number GS ISO 12466-1 : GS 198 : 2011 GS ISO 2074 : 2007Ψ Page 10 134 6 6 6 10 10 54 GS 146-1 : 2007 GS 145-3 : 2008 GS 145-2 : 2008 GS 197 : 2003(2008) GS 194 : 2003(2008) Wood and Wood Products – Semi-Manufactures of Timber – Specification for planed timber mouldings GS 984:2009 CATALOGUE OF GHANA STANDARDS © GSA 2012 LIST OF WITHDRAWN GHANA STANDARDS 445 CATALOGUE OF GHANA STANDARDS © GSA 2012 ANNEX A LIST OF WITHDRAWN GHANA STANDARDS WITHDRAWN GS 2:1969 REPLACED BY GS IEC 61923: 1991 GS IEC 60335-1:2004 GS IEC 60335-2-6:2005 GS IEC 60335-7:2004 GS IEC 60335-9:2006 GS IEC 60335-12:2002 GS IEC 60335-14:2002 GS IEC 60335-25:2005 GS IEC 60335-58:2002 GS IEC 60335-78:2002 GS ISO 6636/1:1986 GS ISO 6635:1984 GS ISO 7952:1994 GS ISO 9526:1990 GS ISO 6557/2:1984 GS ISO 6637:1984 GS ISO 6632:1981 GS ISO 6561 2:2005 GS ISO 5518: 2007 GS ISO 5516:1978 GS ISO 5517:1978 GS ISO 6561-1:2005 GS ISO 17239:2004 GS ISO 5520:1981 GS ISO 5522:1981 GS ISO 5515:1979 GS ISO 5521:1981 GS ISO 6557/1:1986 GS ISO 5519:1978 GS ISO 6558-2:1992 GS ISO 6633:1984 GS ISO 6634:1982 GS ISO 6636-2:1981 GS ISO 7952:1994 GS ISO 9526:1990 GS ISO 707:1997 GS 708:2003 GS ISO 8262-1:2005 GS ISO 8262:2:2005 GS ISO 1211:1999 GS ISO 12081:1998 GS ISO 1736:2000 WITHDRAWN REPLACED BY GS ISO 1737:1999 GS ISO 1740:2004 GS ISO 2446:1976 GS ISO 3976:2006 GS ISO 5536:2002 GS ISO 6091:1980 GS ISO 6092:1980 GS ISO 6731:1989 GS ISO 6734:1989 GS ISO 8070:2007 GS ISO 8968-1:2001 GS ISO 8968-5:2001 GS ISO 12080-1:2000 GS ISO 12080-2:2000 GS ISO 12081:1998 GS 246:2004 GS CODEX STAN 16:1981 GS CODEX STAN 78:1981 GS 525:2003 GS 706:2003 GS CODEX STAN 19:1999 CODEX STAN 211:1999 GS 720:2003 GS 717:2003 GS CODEX STAN 14:1981 GS CODEX STAN 18:1981 GS 124:2005 GS ISO 3758:2005 GS IEC 60335-2-80:2004 GS 297:2003 GS IEC 60086-1:2000 GS IEC 60086-2:2001(& AMD 2) GS IEC 60086-3:2004 GS CAC/RM 42 GS CODEX STAN 99:1981 GS CODEX STAN 1:2005 GS CODEX STAN 13:1981 GS ISO 13690:1999 GS 4:1970 GS 8:1970 GS 11:1970 GS 12:1970 GS 13:1970 GS 14:1970 GS 15:1970 GS 16:1970 GS 17:1970 GS 18:1970 GS 20:1970 GS 27:1970 GS 34:1970 GS 37:1970 GS 39:1970 GS 40:1971 GS 42:1972 GS 43:1972 GS 44:1973 GS 45:1973 GS 46:2004 GS 50:1973 GS 55:1978 GS 57:1978 GS 60:1990 GS 5:1970 GS 6:1970 GS 7:1970 446 CATALOGUE OF GHANA STANDARDS © GSA 2012 WITHDRAWN GS 61:1990 GS 63:1990 GS 66:1990 GS 67:1990 GS 68:1990 GS 69:1990 GS 72:1990 GS 73:1990 GS 74:1990 GS 75:1990 GS 76:1990 GS 77:1990 GS 78:1990 GS 79:1990 GS 82:1990 GS 83:1990 GS 87:1991 GS 99:1990 GS 125:1989 GS 126-1:1992 GS 126-2:1992 GS 139:1990 GS 143:1992 GS 175-2:1998 GS 175-4:1998 GS 175-6:1998 REPLACED BY GS 765:2003 GS CAC/RCP 57:2004 GS CAC/RCP 1:1969 GS ISO 6579:2002 GS CODEX/RCP 58:2005 0GS ISO 6734:1989 GS ISO 139:2005 GS ISO 3933:1976 GS ISO 3932:1976 GS ISO 3801:1977 GS ISO 13934-1:1999 GS ISO 105-B01:1994 GS ISO 105-E04:1994 GS ISO 105-X12:2001 GS ISO 5077:2007 GS ISO 13938-2:1999 GS 337:2003 GS 338:2003 GS ISO 105-A02:1993 (TECH.2:2005) GS 126:2005 GS 126:2005 GS IEC 60335-2-3:2005 GS ISO 7027:1999 GS ISO 7887:1994 GS ISO 9308-2:1990 GS ISO 5667-1:2006 GS ISO 5667-3:2003 GS ISO 5667-4:1987 GS ISO 5667-5:2006 GS ISO 5667-6:2005 GS ISO 19458:2006 GS ISO 6935-1:2007 GS IEC 60095-4:1989 ( & AMD 1:1995) GS IEC 60095-1:2000 GS ISO 4422-1:1996 GS ISO 4422-2:1996 GS ISO 4422-3:1996 GS ISO 4422-4:1997 GS ISO 4422-5:1997 GS 929:2008 WITHDRAWN GS 232:1997 GS 234:1997 GS 235:1997 REPLACED BY GS 929:2008 GS 929:2008 GS 929:2008 GS 190:1990 GS 214:1995 GS 217:1999 GS 231:1997 447 . COR. CATALOGUE OF GHANA STANDARDS © GSA 2012 WITHDRAWN GS CODEX STAN 14:1981 GS CODEX STAN 59:1981 GS CODEX STAN 129:1981 GS CODEX STAN 218:1999 GS CODEX STAN 222:1995 GS ISO 31-1:1992 GS ISO 31-3:1992 GS ISO 31-4:1992 GS ISO 31-7:1992 GS ISO 31-12:1992 GS ISO 48:1999 GS ISO 76:1987 GS ISO 188:1998 GS ISO 246:1995 GS ISO 281:1990 GS ISO 355:1977 GS ISO 815:1991 GS ISO 877:1994 GS ISO 898-1:1999 GS ISO 1179:1981 GS ISO 1224:1984 GS ISO 1275:1995 GS ISO 1307:1992 GS ISO 1395:1982 GS ISO 1436-1:2001 GS ISO 1436-2:2005 GS ISO 1461:1999 GS ISO 1503:1977 GS ISO 1683:1983 GS ISO 1891:1979 GS ISO 1996-2:1987 GS ISO 1996-3:1987 GS ISO 2035:1974 GS ISO 2044:1974 GS ISO 2079:1981 GS ISO 2107:2004 GS ISO 2320:1997 GS ISO 2398:1995 GS ISO 2490:1996 GS ISO 2491:1974 GS ISO 2492:1974 GS ISO 2504:1973 GS ISO 2742:1998 GS ISO 2744:1998 GS ISO 2790:1994 GS ISO 2941:1974 GS ISO 3245:1997 GS ISO 3290:2001 GS ISO 3322:1985 GS ISO 3547-1:1999 GS ISO 3601-1:2002 GS ISO 3604:1976 REPLACED BY GS 588:2004 - WITHDRAWN GS ISO 3724:1976 GS ISO 3758:1991 GS ISO 3821:1998 GS ISO 3857-3:1977 GS ISO 3862-1:2001 GS ISO 3862-2:2005 GS ISO 3932:1976 GS ISO 3933:1976 GS ISO 3994:1998 GS ISO 4079-1:2001 GS ISO 4079-2:2005 GS ISO 4180-1:1980 GS ISO 4180-2:1980 GS ISO 4409:1986 GS ISO 4411:1986 GS ISO 4628-3:1982 GS ISO 4671:1999 GS ISO 4706:1989 GS ISO 4775:1984 GS ISO 5171:1995 GS ISO 5172:1995 GS ISO 5182:1991 GS ISO 5598:1985 GS ISO 5599-3:1990 GS ISO 5774:1997 GS ISO 5821:1979 GS ISO 6020-1:1998 GS ISO 6099:2001 GS ISO 6194-1:1982 GS ISO 6194-4:1999 GS ISO 6194-5:1990 GS ISO 6279:1979 GS ISO 6301-1:1997 GS ISO 6301-2:1997 GS ISO 6336-1:1996 GS ISO 6336-2:1996 GS ISO 6336-3:1996 GS ISO 6431:1992 GS ISO 6464:1983 GS ISO 6621-1:1986 GS ISO 6803:1994 GS ISO 6922:1987 GS ISO 7121:1986 GS ISO 7180:1986 GS ISO 7183-2:1996 GS ISO 7250:1996 GS ISO 7411:1984 GS ISO 7412:1984 GS ISO 7413:1984 GS ISO 7414:1984 GS ISO 7415:1984 GS ISO 7416:1984 REPLACED BY GS ISO 3758:2005 GS ISO 22198:2006 GS ISO 22198:2006 - - - - GS ISO 15552:2004 - - GS ISO 7183:2007 - 448 . CATALOGUE OF GHANA STANDARDS © GSBA 2021 GS ISO 3663:1976 GS ISO 7508:1985 GS ISO 7573:1983 GS ISO 7595:1984 GS ISO 7963:1985 GS ISO 7989-1:2006 GS ISO 8131:1992 GS ISO 8138:1998 GS ISO 8140:1991 GS ISO 8242:1989 GS ISO 8308:1993 GS ISO 8330:1998 GS ISO 8426:1988 GS ISO 8501-1:1988 GS ISO 8501-3:2001 GS ISO 8510-1:1990 GS ISO 8510-2:1990 GS ISO 8573-2:1996 GS ISO 8748:1997 GS ISO 8750:1997 GS ISO 8751:1997 GS ISO 8960:1991 GS ISO 9012:1998 GS ISO 9139:1991 GS ISO 9453:1990 GS ISO 10065:1990 GS ISO 10110-1:1996 GS ISO 10110-5:1996 GS ISO 10110-7:1997 GS ISO 10287:1992 GS ISO 12128:2001 GS ISO 13769:2002 GS ISO 14001:1996 GS ISO 7417:1984 GS ISO 17558:2006 - - - ISO 15630-1:2002 ISO 15630-2:2002 ISO 15630-3:2002 ISO 15630-1:2002 ISO 15630-2:2002 ISO 15630-3:2002 - 449 . CATALOGUE OF GHANA STANDARDS ©2012 For more information contact: GHANA STANDARDS AUTHORITY adjacent to the GULF HOUSE TETTEH QUASHIE INTERCHANGE.gov. P.gh Or Visit our website: www.gov.gsa.gov.gh │ [email protected] .BOX MB 245 ACCRA. GHANA TEL: 233(0302)500691│FAX 233(0302)500231 E-mail: [email protected].