C40_CRN_2085198-001sp10

gGE Healthcare Centricity* PACS Customer Release Notes PACS 4.0 Release Do not duplicate. Copyright © 2001-2014 by General Electric Co. *Trademark of General Electric Co. Copyright Information All Licensed Software is protected by the copyright laws of the United States and by applicable international treaties. No rights under copyrights are transferred to Customer, except as specifically provided in the License Grant section. Trademark Information GE, the GE Monogram, and Centricity are trademarks or registered trademarks of the General Electric Company. All other product names and logos are trademarks or registered trademarks of their respective owners. Confidentiality and Proprietary Rights This document is the confidential property of GE and/or its affiliated entities. It is furnished to, and may only be used by, customers and their employees under a written agreement with GE and may only be used in accordance with the terms of that agreement. The access and use of this document is restricted to customers and their employees. The user of this document agrees to protect the confidentiality of the information contained herein and GE’s proprietary rights as expressed herein and not permit access to this document by any person for any purpose other than as an aid in the use of the GE software. In no case may this document or any portion hereof be accessed, made available, examined, or copied for the purpose of developing, marketing, or supporting any system or computer program similar to the GE software. No part of this document may be copied without the prior written permission of GE. The information in this document is subject to change by GE without notice. Inquiries regarding permission for use of material contained in this document should be addressed to: GE Healthcare, ATTN: General Counsel, 540 W. Northwest Highway, Barrington, IL 60010 Publication Date and Document Numbers November 20, 2014 DOC1594112 2085198-001 Service Pack SP10 2085198-001 2 General Definitions of Symbols The following table defines symbols used throughout this document and the product software: Symbol Definition This symbol indicates the AUTHORIZED REPRESENTATIVE IN THE EUROPEAN COMMUNITY of the product. This symbol indicates the MANUFACTURER of the product. This symbol indicates the DATE OF MANUFACTURE of the product. This symbol indicates that the operator should CONSULT INSTRUCTIONS FOR USE for further information. This symbol indicates the manufacturers BATCH CODE, or lot number of the product. The symbol for CAUTION highlights the fact that there are specific warnings or precautions associated with the device. The WEEE symbol indicates that the waste of electrical and electronic equipment must not be disposed as unsorted municipal waste and must be collected separately. 2085198-001 3 Contents Chapter 1 About This Release 6 Section 1: Centricity PACS 4.0 SP10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Other Related Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Section 2: Contacting GE Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Applications Support and Service Support (Asia Regions) . . . . . . . . . . . . . . . . . . . . 6 Applications Support Using iCenter, eService, and Applications Answerline . . . . . . 7 Contact Information for GE Healthcare Offices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Section 3: Software Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PACS KCAT List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 AW Server KCAT List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Section 4: Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Section 5: Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Screen Captures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Section 6: Configure Adobe Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Section 7: Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Section 8: Acronyms and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Chapter 2 System Requirements 13 Section 1: Centricity PACS Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Hardware and Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Hardware Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Browser Support for Centricity PACS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 C2C Server Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Java 1.7 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SPINE Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Virtual Machine Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Section 2: RA1000 Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Hardware Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Chapter 3 Release Content 27 Section 1: Features and Enhancements Effective with Centricity PACS 4.0 SP10 . . . 27 RA1000 Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Centricity PACS Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2085198-001 4 Section 2: Issues Resolved in Centricity PACS 4.0 SP10 . . . . . . . . . . . . . . . . . . . . . . 31 Section 3: Upgrade Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Chapter 4 Open Issues 43 Section 1: Report Palette Out of Synch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Section 2: Browser Behavior When Using the Centricity Administration Tool . . . . . . . . 43 Safari for Windows Issue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Viewing the Calendar in the CA Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Security Prompt When Navigating the CA Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Chapter 5 System Documentation Additions and Corrections 45 Section 1: RA1000 Workstation and Exam Manager Operator Manual . . . . . . . . . . . . 45 Filtering Images Not Supported for Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Extends Online Help Not Available in Norwegian . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Section 2: Workstation Installation and Service Manual . . . . . . . . . . . . . . . . . . . . . . . . 46 QC Tool Button Is Not Configurable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Synchronizing the Reporting System and RA1000 Worklist Selection (Browse Mode) 46 Platinum Extend Property Default in RIS-IC–PACS Integration . . . . . . . . . . . . . . . 47 DDPs and Filtering Images Not Supported for Display . . . . . . . . . . . . . . . . . . . . . . 47 Section 3: Servers Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Setting ENM Configuration for HL Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Section 4: System Administrator Online Help Manual . . . . . . . . . . . . . . . . . . . . . . . . . 49 Enabling a User to Search for Another User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 2085198-001 5 . . . . . . . 9 Section 5: Documentation Conventions . . . . . . . . . . . . . . . . . 11 Section 7: Safety . . . . . . . . . see the release notes for prior releases. To access copies of the release notes. . . . . visit the Common Documentation Library (CDL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Section 6: Configure Adobe Reader . . . . . . . Section 2: 2-1: Contacting GE Support Applications Support and Service Support (Asia Regions) To request applications support or service support for the Asia regions. . . . . . . . . . . . . . . . . . . . .0 SP10 is an upgrade release for both the RA1000 workstation and the PACS servers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . This release contains new features and resolutions for certain product defects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1: Other Related Release Notes Resolved and open issues from prior releases apply to this release. . . . . . . . . . . . . . . . . . . . . . 11 Section 1: Centricity PACS 4. . . . . . . . . . . . . . . . . 8 Section 4: Related Documentation . . . . . . . . . . For complete information. 6 Section 3: Software Media . . . . . . . . . . . . . . . . . . . . . . . . . . refer to the following phone numbers. . . . . see “Release Content” on page 27. . . . . . . .0 SP10 . . . . . . 6 Section 2: Contacting GE Support . . . . . Table 1-1: Applications Support and Service Support (Asia Regions) Country Support Phone Number Australia 1800659465 China 8008108188 *Trademark of General Electric Co. . . . . . . . . . . . . . . . . . . .Chapter 1 About This Release This chapter includes: Section 1: Centricity PACS 4. . . . . . . 11 Section 8: Acronyms and Abbreviations . . . . . . . . . . . . . . . . . . . .0 SP10 Centricity* PACS 4. . . . . . . . 2085198-001 6 . . . . . . . For information on resolved issues. . . . . . . . . and Applications Answerline To request applications support. With iCenter or eService you can:  Initiate requests for service and applications support from the web  Get rapid. English-speaking customers can also use the following resource:  2-3: GE PACS Applications Answerline 1-855-762-6650.Chapter 1 About This Release Table 1-1: Applications Support and Service Support (Asia Regions) (Continued) 2-2: Country Support Phone Number Hong Kong 21006288 India 1800114567 Japan 0120055919 Korea 15446119 Malaysia 1800883911 New Zealand 0800659465 Singapore 63880932 Taiwan 0800021770 Applications Support Using iCenter. contact your Director of Service or Service Engineer to open an account. eService. including uptime. 2085198-001 7 . Other customers should contact their GE Field Engineers or support personnel. online access to the Remote Online Center (ROC) where expert service engineers review and respond to service requests quickly  View the status of open service requests  View service history and reports about your systems. and other service delivery metrics If you do not have access to iCenter or eService. English-speaking customers may open a support request in GE Healthcare iCenter™ or eService. and select the option for your product (available for US and Canadian customers) Contact Information for GE Healthcare Offices Addresses and phone numbers for GE Healthcare offices are listed below. remote fix and service call trends. 0 SP10 WS APP 2062264-068 2064672-001 G DVD CPACS 4.0 SP10 WS TOOLS 2027437-017 2064670-001 G CD CPACS 4.0 SP10 LINUX SRVR APP 2062265-040 2064673-002 G CD CPACS 4.0 SP10 CDPS 2062266-005 2064674-001 G 2085198-001 8 . CVE-2014-7169). Contact your GE support representative for more information.0 SP10 Media Description Media Build Number Media Part Number Media Revision CD CPACS 4.0 SP10 ON-LINE HELP 2063983-009 2064671-001 G CD CPACS 4.0 SP10 release of the DVD CPACS LINUX PLATFORM 5. France Asia Headquarters GE Healthcare 1 BLD-3F No. Zhang Jiang Hi-Tech Park Shanghai 201203 China Tel: 8621-38777888 Fax: 8621-38777499 Section 3: Important Software Media The Centricity PACS 4. Table 1-2: Software Media for Centricity PACS 4. Sites that do not reload servers should install the previously distributed BASH patch.Chapter 1 About This Release Corporate Headquarters GE Healthcare 540 W Northwest Highway Barrington. 1 Hua Tuo Road. IL 60010 USA Tel: +1 847 277-5000 or +1 800-437-1171 or +1 800-682-5327 Fax: +1 847 277-5240 European Headquarters GE Medical Systems SCS 283 rue de la Minière 78530 BUC.” Servers loaded using this platform media will not have the Shellshock vulnerability.8 media includes the patch for “Shellshock: Bash Code Injection Vulnerability via Specially Crafted Environment Variables (CVE-2014-6271. Table 1-2 lists the Centricity PACS software media for this release. 3-2: AW Server KCAT List For KCAT information for this release.8 2051376-007 2064675-002 G DVD CPACS 4.0 SP10 APP WITH 3. Table 1-3: Centricity PACS Related Documentation Manual Document Number Centricity PACS 4.0 System Overview Manual 2086828-001 2085198-001 9 .0 release were updated.0 DICOM Print Server Service Manual 2086829-001 Centricity PACS 4.Chapter 1 About This Release Table 1-2: Software Media for Centricity PACS 4.0 SP10 SERVER PLUG IN 2057958-005 2076535-001 E 3-1: PACS KCAT List For KCAT information for this release. Section 4: Related Documentation The table below lists the related documentation for this Centricity PACS release.0 (DOC1166416). Visit the Common Documentation Library (CDL) for the current version of each manual.0 System Administrator Online Help Manual 2085195-001 Centricity PACS 4.0 Servers Installation and Upgrade Manual 2085194-001 Centricity PACS 4.0 (DOC1166416).0 Servers Service Manual 2085196-001 Centricity PACS 4.0 SP10 (Continued) Media Description Media Build Number Media Part Number Media Revision DVD CPACS LINUX PLATFORM 5.0 SP10 LINUX REPLICATION 2051377-019 2064676-001 G DVD CPACS 4. see the Product Configuration Master for Centricity PACS 4. the documentation set for this release includes a combination of SP numbers: product manuals that required updating for this release (SP10) and product manuals from prior releases that did not require updating for this release. Therefore.2 BASELINE 2051374-011 2065943-002 F DVD PACS-AW 4. see the Product Configuration Master for Centricity PACS 4. Note: Only the product manuals that were affected by the service pack (SP) scope of this Centricity PACS 4. where xxx is the country code for localization. 2085198-001 10 . Upgrade. for example: lom> Text represented as menu or sub.0 RA1000 Workstation Quality Control Manual 2081376-001 Note: -001 for English version. -xxx for all other supported languages.0 Workstation Installation and Service Manual 2086046-001 Centricity PACS 4. 2085192-101 for French.This typeface represents all menu and sub-menu menu names. where xxx is the country code for localization Centricity PACS 4.0 Service Manual 2024300-001 Centricity AW Suite 2.Chapter 1 About This Release Table 1-3: Centricity PACS Related Documentation (Continued) Manual Document Number Centricity PACS 4. Table 1-4: Text Convention Descriptions Convention Description Text represented as a screen display. This typeface represents displays that appear on your terminal screen.0 Installation. for example: On the File menu. and Service Manual 2030968-001 Section 5: 5-1: Documentation Conventions Text Conventions Table 1-4 lists text conventions used in this manual. click New.0 RA1000 Workstation and Exam Manager Operator Manual 2085192-001 Note: 2085191-001 for Great Britain. names within procedures.0 Quality Control Maintenance Procedures 2086830-001 Centricity Extends Online Help Manual 2031481-001 Centricity Extends PowerScribe Service Manual 2032052-001 Centricity Extends TalkStation Service Manual 2013111-001 Centricity AW Suite 1. Centricity PACS 4. 2085190-xxx for all other languages. see your Adobe Reader documentation. And the advanced search tool enables you to search all PDF files in a directory. To configure these tools. navigation. Section 6: Configure Adobe Reader Adobe Reader offers powerful view. Section 8: Acronyms and Abbreviations Table 1-5: Acronyms and Abbreviations 2085198-001 Term Definition C2C Centricity to Centricity CDPS Centricity DICOM Print Server DAS DICOM Application Server DDP Default Display Protocol DICOM Digital Imaging and Communications in Medicine IDR Integrated Desktop Reporting IMS Information Management System ITS Image Transfer Service IV Image Volume PACS Picture Archiving and Communication System RIS Radiology Information System 11 . the Previous View and Next View tools work like Backward and Forward in a web browser. For example.Chapter 1 About This Release 5-2: Screen Captures The example screens in this manual may not represent what you see on your monitor. and multi-document search tools that are not displayed by default. use them only as guidelines. refer to the Centricity PACS RA1000 Workstation and Exam Manager Operator Manual and the Centricity PACS Servers Service Manual for this release. Section 7: Safety For safety information regarding Centricity PACS. Chapter 1 About This Release Table 1-5: Acronyms and Abbreviations (Continued) 2085198-001 Term Definition SSD Solid-State Drive 12 . . . . . . 300GB) x86–64 4 10 x 146GB (RAID5) 16GB IMS (XXXLDB. . . . . . . . . .Chapter 2 System Requirements This chapter includes: Section 1: Centricity PACS Servers . RAID1) + 24 x 16GB 146GB (SAN. . All servers must be capable of supporting a 64-bit operating system. 100GB) x86–64 2 6 x 146GB (RAID5) 8GB IMS (XXLDB. . . . . . . . . . 21 For a PDF copy of the Centricity PACS 4. 300GB–3TB) x86–64 4 2 x 146GB (Internal. . RAID5) DAS. . . . . . . . Replication Server x86–64 2 2 x 36GB (RAID1) 2GB DAS/IV x86–64 2 2 x 36GB (RAID1) + 10 x 146GB (RAID5) 4GB CDPS x86 2 2 x 74GB (RAID1) 2GB 1-2: Hardware and Software Compatibility Table 2-2 lists the hardware and software compatible with Centricity PACS servers and subsystems in this release. . . . . . . 13 Section 2: RA1000 Workstation . . . . . . . C2C. Table 2-1: Minimum Hardware Requirements for Centricity PACS Servers Function CPU Type # CPUs x # Cores/CPU Disk Space Memory IMS (XLDB. . . . Coordination Module. . Section 1: 1-1: Centricity PACS Servers System Requirements PACS 4.0 SP10 supports the minimum hardware configurations listed in Table 2-1 for each server or client subsystem. . . . .0 SP10 release notes. . . . . . . . . 2085198-001 13 . . . . ITS. . . . visit the Common Documentation Library (CDL). . . . . . . . RAID1+0. . No Solaris servers are supported. . . . . . . . the site will need to acquire a standalone server to run AIM. on a standalone AIM server. Table 2-2: Hardware and Software Compatibility with Centricity PACS 4. verify that your site hardware meets Centricity PACS compatibility requirements. you will need to reinstall the PowerPath drivers.0 SP10 supports the Archive Interface Module (AIM). Important Before installing or upgrading. Make sure you are prepared to do this after the Red Hat 5.8 will break the configuration of your PowerPath drivers.0 SP10 Function or Component Hardware Operating System IMS HP DL360 G5 Internal Quad Core (Linux OS) HP DL360 G6 Internal (Linux OS) HP DL580/360 G5 SAN Quad Core (Linux OS) HP DL360 G6 SAN (Linux OS) HP DL370 G6 Internal Quad Core (Linux OS) HP DL360 G7 Internal Quad Core (Linux OS) HP DL360 G7 SAN Quad Core (Linux OS) HP DL580 G7 SAN Quad Core (Linux OS) HP DL580 G7 Quad Core IO accelerator (Linux OS) HP DL360 G8 IMS Quad Core (Linux OS) HP DL360 G8 IMS SAN Dual Quad Core (Linux OS) HP DL350 G8 IMS Dual Quad Core (Linux OS) HP DL560 G8 Six Core Internal or External SSD Linux 5. If a pre-4. The AIM software must be configured on the EA server or a standalone EA server before the PACS upgrade is completed. The AIM software runs either on the Enterprise Archive (EA) server or. PowerPath Users Upgrading to Red Hat 5. To restore the multipathing connection.8 Dell PE6800 Internal Dual Core (Linux OS) Dell R710 MD1000 Quad Core (Linux OS) Dell R900 SAN Quad Core (Linux OS) Dell R610 IMS Internal Quad Core (Linux OS) Dell R610 IMS SAN Quad Core (Linux OS) Dell T710 Internal Quad Core (Linux OS) Dell R810 SAN Quad Core (Linux OS) Dell R620 IMS Internal Quad Core (Linux OS) Dell R620 IMS SAN Dual Quad Core (Linux OS) Dell T620 IMS Internal Dual Quad Core (Linux OS) 2085198-001 14 .0 SP10 site uses either EA or the GE Application Service Provider (GE ASP) archiving service.8 upgrade is complete. Important Centricity PACS 4. if the site does not have EA. escalate to your director of Service as soon as possible. If your site's hardware is not listed in this section.Chapter 2 System Requirements 1-3: Hardware Compatibility Caution: Hardware supplied by customers must meet all applicable standards listed under the “Certifications” section in the Centricity PACS RA1000 Workstation and Exam Manager Operator Manual for this release of Centricity PACS. Chapter 2 System Requirements Table 2-2: Hardware and Software Compatibility with Centricity PACS 4.8 Dell R610 (Quad Core) (Linux OS) Dell R610 (Six Core) (Linux OS) Dell R620 (Six Core) (Linux OS) IV HP DL360 (Dual) G5 + SAN (Linux OS) HP DL360 (Quad) G5 + SAN (Linux OS) HP DL360 G6 + SAN (Linux OS) HP DL360 G7 (6 Core) + SAN (Linux OS) HP DL360 G8 (6 Core) + SAN (Linux OS) HP NAS Linux 5.8 Dell R610 (Quad Core) (Linux OS) Dell R610 (Six Core) (Linux OS) Dell R620 (Six Core) (Linux OS) Dell NAS 2085198-001 15 .8 Dell PE6800 Internal Dual Core Dell R610 IMS Internal Quad Core (Linux OS) Dell R610 IMS SAN Quad Core (Linux OS) Dell T710 Internal Quad Core (Linux OS) Dell R810 SAN Quad Core (Linux OS) Dell R620 IMS Internal Quad Core (Linux OS) Dell R620 IMS SAN Dual Quad Core (Linux OS) Dell T620 IMS Internal Dual Quad Core (Linux OS) DAS HP DL360 (Dual) G5 (Linux OS) HP DL360 (Quad) G5 (Linux OS) HP DL360 G6 (Linux OS) HP DL360 G7 (6 Core) (Linux OS) HP DL360 G8 (6 Core) (Linux OS) Linux 5.0 SP10 (Continued) Function or Component Hardware Operating System IMS Replication HP DL580 Quad G5 Internal (Linux OS) HP DL580\360 Quad (SAN) G5 (Linux OS) HP DL360 G6 (SAN) (Linux OS) HP DL360 G7 (Internal or SAN) Quad Core (Linux OS) HP DL370 G6 Internal Quad Core (Linux OS) HP DL580 G7 (SAN) (Linux OS) HP DL580 G7 Quad Core IO accelerator (Linux OS) HP DL360 G8 IMS Quad Core (Linux OS) HP DL360 G8 IMS SAN Dual Quad Core (Linux OS) HP DL350 G8 IMS Dual Quad Core (Linux OS) Linux 5. 16 .Chapter 2 System Requirements Table 2-2: Hardware and Software Compatibility with Centricity PACS 4. Quad) G5 (Windows Server OS) HP DL360 G6 (Windows Server OS) HP DL360 G7 (6 Core) (Windows Server OS) HP DL360 G8 (6 Core) (Windows Server OS) Windows Server 2003 Windows Server 2008 Dell R610 (Quad Core) (Windows Server OS) Dell R610 (Six Core) (Windows Server OS) Dell R620 (Six Core) (Windows Server OS) C2C / ITS HP DL360 G4 (Linux OS) HP DL360 (Dual) G5 (Linux OS) HP DL360 (Quad) G5 (Linux OS) HP DL360 G6 (Linux OS) HP DL360 G7 (6 Core) (Linux OS) HP DL360 G8 (6 Core) (Linux OS) Linux 5.0 SP2 & SP3 See your vendor’s documentation.8 Dell R610 (Quad Core) (Linux OS) Dell R610 (Six Core) (Linux OS) Dell R620 (Six Core) (Linux OS) DB Replication Server HP DL360 (Dual) G5 (Sybase 15) (Linux OS) HP DL360 (Quad) G5 (Sybase 15) (Linux OS) HP DL360 G6 (Sybase 15) (Linux OS) HP DL360 G7 (Sybase 15) (Linux OS) HP DL360 G8 (Sybase 15) (Linux OS) Linux 5. CDPS HP DL360 (Dual.8 Dell R610 (Quad Core) (Linux OS) Dell R610 (Six Core) (Linux OS) Dell T710 (Quad Core) (Linux OS) Dell R620 (Six Core) (Linux OS) HL-7 Interface  Broker 2085198-001 Agfa Broker 2.0 SP10 (Continued) Function or Component Hardware Operating System DAS/IV HP DL360 (Dual) G5 (Linux OS) HP DL360 (Quad) G5 (Linux OS) HP DL360 G6 (Linux OS) HP DL360 G7 (6 Core) (Linux OS) HP DL360 G8 (6 Core) (Linux OS) Linux 5.8 Dell R610 (Quad Core) (Linux OS) Dell R610 (Six Core) (Linux OS) Dell R620 (Six Core) (Linux OS) Note: AIM must be implemented on the HP DL360 dualor quad-core G5. (Dual. 17 .x HP DL3x0 G4.x  Note: When you launch a Centricity PACS tool in your browser. Follow the prompts on your screen.Chapter 2 System Requirements Table 2-2: Hardware and Software Compatibility with Centricity PACS 4.1 HP DL360 G7 (Windows Server OS) Dell R610 (Windows Server OS) Dell R710 (Windows Server OS) See the Centricity Clinical Gateway for PACS Installation Manual for this release of CCG. G6 See the Centricity Clinical Gateway for PACS Installation Manual for this release of CCG.0) 3400 (v9.1 HP DL360 G8 (Windows Server OS) See the Centricity Clinical Gateway for PACS Installation and Upgrade Manual for this release of CCG.3.1 HP DL360 G7 (Windows Server OS) HP DL360 G8 (Windows Server OS) Dell R610 (Windows Server OS) Dell R620 (Windows Server OS) Dell R710 (Windows Server OS) See the Centricity Clinical Gateway for PACS Installation Manual for this release of CCG. Table 2-3: Browsers Supported for Centricity PACS Tools Tool or Component Browser         Centricity Administration (CA) Centricity Exam Manager (web client) Flamingo Command Center Remote Host Administration (RHA) RA1000 Workstation and Exam Manager Online Help Servers Service Online Help (includes help for both Flamingo and RHA) System Administrator Online Help (CA online help) 2085198-001 Internet Explorer 8–11 Chrome 33.x  Opera 19.1-81.0. Quad) G5. Disregard any security messages that may appear.3 112.4.0-HF4) 3600 (v10.4.  CCG 8.x  Safari 5.1-HF8) 1600 (v9.0 SP10 (Continued) Function or Component Hardware Operating System  CCG 5.x  Firefox 27.0.2.2.0-HF4) 1600 (v10.3.8-407.8-407. Note: See “Browser Behavior When Using the Centricity Administration Tool” on page 43 for minor browser-dependent issues. 1500 (v9. you may be prompted to download and install the required Java plug-in.2.2.  CCG 8.0) N/A F5 BIG-IP for DB Replication / Load Balancing 1-4: Browser Support for Centricity PACS Table 2-3 shows the browsers supported in this release of Centricity PACS.1-81.  CCG 9.3 112.1-HF8) 3600 (v9. Virtual Machine Requirements Centricity PACS 4.7 for the following component:  1-7: RA1000 SPINE Authentication Centricity PACS 4. Important Note: Supporting Centricity PACS components in a VM environment requires customer VM expertise and a customer VM environment. equivalent virtual machine environments are supported.0 SP10. Note: 1-8: SPINE security is not available in some markets. 2085198-001 18 .0 SP10.0 SP10 and other versions are not supported. 1-6: Java 1.0 SP10 supports installation and deployment of the IMS and other servers in a virtual environment. SPINE consists of security features used in the Centricity PACS Workstation and Exam Manager that include Single Sign On (SSO) and Exam Access: Legitimate Relationship and Patient Consent [or Patient Demographics Services (PDS)].Chapter 2 System Requirements 1-5: C2C Server Compatibility In Centricity PACS 4. Transfers between PACS 4.7 Support With this release. Centricity PACS supports Java 1.0 SP10 does not support SPINE authentication. Table 2-4: Minimum Hardware Requirements for Centricity PACS Servers Function CPU Type # CPUs x # Cores/CPU Disk Space Memory VMware ESXi Server x86–64 16 2 x 74GB (RAID1) 16 GB VMware vCenter Server x86 2 2 x 74GB (RAID1) 2 GB Servers must be capable of supporting a 64-bit operating system. The use of “VMware” and other vendor-specific references are for example only.0 SP10 to PACS 4. Centricity to Centricity (C2C) servers are supported between PACS 4. 0 Ghz each) 32 GB 1x VMXNET 3 IMS XXLDB (550 GB) 16 CPU (2. Note: Centricity PACS does not support oversubscription of hardware resources in a virtual environment. additional virtual CPUs may be required to perform the same processes as CPUs with higher CPU speed.8 is required if the server uses the AMD Opteron 6000-series chip set in a VMware virtual environment. if you install a database server and two nodes.0 Ghz each) 4 GB 1x VMXNET 3 IMS XLDB (100 GB) 4 CPU (2. Note: You can add additional VMs to your VM farm. however. In a VM environment.Chapter 2 System Requirements Table 2-5: Basic VM Configuration for Centricity PACS Servers Server Type CPU Memory NIC DAS 2 CPU (2. Depending on CPU performance (CPU speed).0 Ghz each) 64 GB 1x VMXNET 3 IMS XXXXLDB (1050 GB) 16 CPU (2. For example. 2085198-001 19 . In a non-VM environment.0 Ghz each) 32 GB 1x VMXNET 3 IMS XXXLDB (800 GB) 16 CPU (2.0 Ghz each) 64 GB 1x VMXNET 3 1-8-1: Memory Requirements Virtual memory needs a 1-to-1 relationship to physical memory. performance degradation may occur if you overextend physical RAM. Therefore.0 Ghz each) 4 GB 1x VMXNET 3 CDPS 2 CPU (2. 1 virtual NIC replaces both physical NICs. the physical servers would require 24 GB (3 servers x 8 GB RAM). 1-8-2: CPU Requirements Virtual CPUs do not always need a 1-to-1 relationship with the physical CPUs as is the case with RAM. and physical memory of the VM farm is 24 GB. the virtual memory of those VMs is also 24 GB. Network Requirements Virtual NICs replace physical NICs. 2 physical NICs are required. Note: 1-8-3: Red Hat Linux 5.0 Ghz each) 16 GB 1x VMXNET 3 IMS XXLDB (300 GB) 8 CPU (2. 8 DAS-IV Linux 5.2.8 Coordination Module Linux 5.0.1.0 Linux 6.1 See the Centricity Clinical Gateway for PACS Installation and Upgrade Manual for the version of CCG.2.0.0 Windows Server 2008 CDPS Windows Server 2008 CCG 8.0 SP10 Centricity PACS Function or Component Operating System IMS (Production and Test) Linux 5.1 Windows Server 2008 For information about setting up a virtual PACS environment.8 DAS Linux 5. 2085198-001 20 .8 ITS Linux 5.4 Note: Only 2D Analytics 1.1.8 EA 4.8 SPS Windows Server 2003 PACS Health Windows Server 2008 Mobil Access 4. see the Centricity PACS Servers Installation and Upgrade Manual for this release of Centricity PACS. C2C Linux 5.8 DB Replication Linux 5. 9. 8.Chapter 2 System Requirements 1-8-4: VMware Compatibility Table 2-6: VMware Compatibility with Centricity PACS 4. Chapter 2 System Requirements Section 2: 2-1: RA1000 Workstation System Requirements Table 2-7: Hardware Requirements for Centricity RA1000 CPU Type CPU Disk Space Memory Minimum x86 2 74 GB 1 GB Recommended x86–64 2 74 GB 3 GB Table 2-8: Minimum System Requirements by Workstation Type Workstation Type CPU Memory Other PACS workstation* 1 dual core (2GHz) [1 quad core (2. video drivers may not be available from the display vendor. 2-2: 2-2-1: Software Compatibility Operating System Following are Windows operating systems compatible with this release of Centricity PACS RA1000. keyboard. and associated cabling. (2) color service monitor for specialized maintenance tasks.66GHz) [1 quad core (2.66GHz) [1 quad core (2. or one or two landscape monitors. B+.5GHz) recommended] 2 GB (3 GB recommended) Gigabit ethernet RIS-IC/PACS integrated workstation 1 dual core (2.5GHz) recommended 2 GB (3 GB recommended) Gigabit ethernet *Standard configuration includes (1) two high-resolution diagnostic portrait monitors (A+. B models) plus one or two clinical landscape monitors (C models). mouse. or four portrait monitors plus one or two landscape monitors.5GHz) recommended 1 GB (3 GB recommended) Gigabit ethernet RIS-IC/PACS integrated workstation with Extends 2 dual core (2. 21 . A. Table 2-9: Windows OS Compatibility with Centricity RA1000 Windows OS Comment Windows 8 (64-bit)   2085198-001 Internet Explorer 10 or later is required by Microsoft Although Centricity RA1000 is compatible with Windows 8. and (3) computer. 1. saving dictation and not saving dictation are the choices when closing an exam during an interrupted workflow. 2.x is required Multiple WDDM video drivers and video card vendors may be used (e. Dell T5600. Professional. and canceling dictation are the options when closing an exam during an interrupted workflow.4 or higher is required for Windows 7.3 is required for 64-bit OS Explorer 6.. 4.3 or above is required when using Windows XP 64 bit.x Yes No Yes No Note: AW Suite 2. or Enterprise for 32-bit applications in 32or 64-bit mode running JRE version jre1. 7. 7.0_20 RA1000 runs as a 32-bit process on 64-bit OS Limited support on Ultimate.4. 2.8 SP1.0.11 Yes Yes AW Suite 1. AW Suite 2.6 SP2.0. Dell T7600.6. ATI 3800 Clinical video card used with Barco 5450 Diagnostic video card)  Windows XP SP3 (32-bit) with Internet  RA1000 runs as a 32-bit process on 64-bit OS  AW Suite 2.g.0.9. 2. or 8      Professional.6. HP Z620. 4.2 or higher. HP Z420.Chapter 2 System Requirements Table 2-9: Windows OS Compatibility with Centricity RA1000 (Continued) Windows OS Comment Windows 7 (32-bit or 64-bit) with Internet Explorer 6.1.1.3 Warning: When using the PowerScribe Extend integration with PACS. Ultimate. or 8 T3600. 7.0. PowerScribe version 5.0.0 SP1. 5.4.0.3.0.0 SP10 Application Application Version 32-bit RA1000 64-bit RA1000 AW Server 2. not saving dictation.0. Note: When using this PACS release with PowerScribe version 5. or 8  Windows XP (64-bit) with Internet Explorer  Customer-supplied Windows XP 64-bit (OS not available on Dell 6.0.5. or HP Z820) Note: Windows XP is no longer supported by Microsoft. 2-2-2: Applications Table 2-1 lists the PACS-supported applications compatible with this release of Centricity RA1000.7 SP1b.0.0. Home Version AW Suite 2.1 or higher is strongly recommended with PACS 3.1.0 SP1. saving dictation. 2085198-001 22 . 2. When using this PACS release or earlier with PowerScribe versions prior to PowerScribe 5. Table 2-10: Integration with Centricity RA1000 4. PowerScribe 4.0.  PowerScribe 360 is only supported in Centricity PACS 4.0 Yes Yes RIS-IC 10.0) Yes Yes Note:  PowerScribe 360 is only supported using the IDR extend.8 (April 2002) Yes Yes RISi (Medora) 4.x.0.5.0) N/A N/A Note: Centricity PACS is not compatible with Centricity Enterprise Web 4.8a).3.2.0 and 2.2 N/A N/A Dictaphone Not versioned N/A N/A Boomerang Not versioned N/A N/A Centricity Web 3. Lanier SpeechQ 1. 2.5 (build 4.0 (build 5.5 are only supported in Centricity PACS 4.0 SP5.2.3 Yes Yes Cerner RadNet 7.5. 1.0 SR1) Yes Yes Talk 3. and 4.2.x.Chapter 2 System Requirements Table 2-10: Integration with Centricity RA1000 4.0. 4.  Generic Extend 1.2 is the required minimum version.5 (build 5.7. 5.0 SP10. Any integration with earlier versions of Agfa TalkStation must be upgraded.1.6.6. Integrated Desktop Reporting (IDR) 1.6 or higher (excluding 4. 10.1 (1. 10. 10.0.  PowerScribe 360 2.0 SP10 (Continued) Application Application Version 32-bit RA1000 64-bit RA1000 PowerScribe 360 with IDR only 1.0).8 Yes Yes Approved for: RIS-driven workflow with or without Centricity Precision Reporting  PACS-driven workflow with or without Centricity Precision Reporting with UP5 and above  Centricity Precision Reporting with UP5 and above  RIS-driven workflow or PACS-driven workflow without Centricity Precision Reporting with UP6 and above. 2085198-001 23 . 2.0.0 SP3.x Yes No Centricity Web DX 2. 2. 4 Yes No Note: Agfa TalkStation Radiology 3.0.5. 1.88.6.0 SP10 (Continued) Application Application Version 32-bit RA1000 64-bit RA1000 Centricity Enterprise Archive (EA) 3.2.4.1.13.0.840. verify that your site hardware meets Centricity PACS compatibility requirements.Chapter 2 System Requirements Table 2-10: Integration with Centricity RA1000 4.113543.0.1.1.11 (with integrated AIM or standalone AIM 3.840.3.10008.2. N/A 2-3: Hardware Compatibility Caution: Hardware supplied by customers must meet all applicable standards listed under the “Certifications” section in the Centricity PACS RA1000 Workstation and Exam Manager Operator Manual for this release of Centricity PACS.5.1. If your site's hardware is not listed in this section.1.2.0).5.1.840.10008.3. 4.1.0.66 Raw Data Storage  1.40 Procedure Log  1.0 SPx Yes Yes FCE/RPPS Conversion Tool The tool is independent of Centricity PACS software N/A releases.840.2. escalate to your director of service as soon as possible.1.0 N/A N/A Universal Viewer 5.840.1.1/2. N/A 4.2.1.1.10001 PhilipsLive3D01 (Philips HP Sonos 7500)  1. Important Before installing or upgrading.6.113543.4. PACS Health Not versioned N/A N/A CRMA 1.x No No Note: Contact your GE representative about migrating to Centricity RIS-IC.10008.6.10008.2.0.67 X-Ray Radiation Dose SR N/A Centricity RIS 2.3 Breast Tomosynthesis Image Storage  1.4.5.840. 1.6.10002 PhilipsLive3D02 (Philips HP Sonos 7500)  1.0 does not support the following SOP classes:  1.0 EA 3.88. 3.1.4.2. Table 2-11: Hardware Compatibility with Centricity RA1000 2085198-001 Manufacturer / Model Comment Dell T5400 Dell T5500 HP Z600 HP Z400 Supported only if the workstation and video card(s) are supported by Windows XP SP3 or Windows 7 24 .1.1. 5.5.1. see your workstation manufacturer’s documentation. 3 MP. KM570071. 2-3-1: Video Cards Table 2-12: Video Cards Supported by RA1000 Video Card 2085198-001 Windows XP1 Windows 72 Windows 83 NVIDIA Quadro NVS 280 PCI-e Y N N NVIDIA Quadro 4 285 NVS PCI-e Y N N NVIDIA Quadro NVS 290 Y N N BarcoMed 2 MP 2FH (P/N: KM570052) Y N N BarcoMed 3 MP 2FH (P/N: KM900051) Y N N BarcoMed 5 MP 2FH (P/N: KM570991)4. 4800 Y Y Y ATI V3900 Y Y Y ATI V58006 Y Y Y ATI V79006 Y Y Y Barco MXRT-1150 Y Y N Barco MXRT-2150 Y Y N Barco MXRT-2400 Y Y Y Barco MXRT-5100 Y N N 25 . 5 MP. KM570070. 3750 Y N N ATI V3800. KM570072) Y N N ATI V3700.5 Y N N BarcoMed Coronis 2/3/5 MP (P/N: 2 MP.Chapter 2 System Requirements Table 2-11: Hardware Compatibility with Centricity RA1000 (Continued) Manufacturer / Model Comment Dell T3600 Dell T5600 Dell T7600 HP Z420 HP Z620 HP Z820 Requires Windows 7 For hardware specifications and upgrade support. or Enterprise edition (32 bit or 64 bit).7 Y Y Y Barco MXRT-7400 Y Y Y Barco MXRT-7500 N Y Y Matrox RAD LPX PCI-e (Eizo) Y Y N Matrox Xenia (Eizo)8 Y Y N EIZO MED V5800 card N Y N EIZO MED V7900 card N Y N EIZO MED-X50009 N Y N EIZO MED-X60009 N Y N EIZO MED-X70009 N Y N 1The OEM no longer supports Windows XP. 2085198-001 26 . 9UV. 3Centricity PACS RA1000 is compatible with Windows 8. 7Supports MXRT-1150/-2150/-5200/-7300 when these boards are combined with an MXRT-x4xx or MXRT-x5xx board.Chapter 2 System Requirements Table 2-12: Video Cards Supported by RA1000 (Continued) Barco MXRT-5200 Y Y N Barco MXRT-54004 Y Y Y Barco MXRT-54504 Y Y Y Barco MXRT-55004 N Y Y Barco MXRT-55504 N Y Y Barco MXRT-73004. video drivers may not be available from the display vendor. 5In a mammography configuration. RA600. 8 IW only. RA1000. Ultimate. 4Centricity PACS RA1000 workstations running on Windows 7 and using 5 MP displays for mammography or tomography reading must use the MXRT-7400/7500 video card. the video card is paired with the monitor set. 2 Professional. however. 6 Use with Eizo monitors. . com. . . and Structured Reports chapter of the RA1000 Workstation and Exam Manager Operator Manual. . .ViewPreferencePanel. . . . . . . Key Image Notes. . . . .newman.ge. .. . . . . . . . . . . . . .g. a new exam note can be created by default (even if automatically displaying exam notes is not enabled. .med. For more information.gui. . This behavior is enabled by selecting Structured Reports for the Automatically Display Notes When Opening an Exam option (Utilities > Preferences > System Preferences > Exam Opening Options). . .userprefs. . . . . . .userprefs. .0 SP10.0 SP10.newman. 1-1-2: Platinum Properties to Display Notes When an Exam Is Opened In the Exam Opening Options (Utilities > Preferences > System Preferences). . . . . . . . .ge. . the following Platinum property can override the user preference settings: com. 31 Section 3: Upgrade Paths . . the Structured Reports tab in the Notes window can be displayed by default when an exam is opened. 42 Section 1: 1-1: 1-1-1: Features and Enhancements Effective with Centricity PACS 4. i. 27 Section 2: Issues Resolved in Centricity PACS 4.ViewPreferencePanel. .autoDisplayExamNotes =false) if the user has the privilege to create exam notes: 2085198-001 27 . see the “Setting Notes Preferences” section in the Exam Notes.overrideNoteTabSelec tionOnNoteUnavailability= Where:  true (default) = display the note type that the user can view and for which notes exist when an exam is opened  false = do not display the Notes window when an exam is opened If there is no default selection when the property above is set to true. . if the note type (e. . . . .. .med. . . . . . .e.0 SP10 RA1000 Workstation Display Structured Notes by Default When an Exam Is Opened With this release. . . . . . . .Chapter 3 Release Content This chapter includes: Section 1: Features and Enhancements Effective with Centricity PACS 4. . Structured Reports) selected by a user cannot be displayed by default when an exam is opened (either because the exam does not contain the note type or because the user does not have the privilege to view the note type). . . .gui. controller. minimum pixel. Note: 1-1-4: Window/level changes are specific to the user and the thumbnail. For more information.desktop.ge. a new Platinum property with its default setting (true) ensures that context is maintained between the reporting system and RA1000 worklist (Browse mode) when an exam is selected (highlighted).SyncVRwithWL=true 2085198-001 28 .ui.DisplayDecim alValue= Where:  false (default) = display ROI statistics on functional maps in exponential format  true = display ROI statistics on functional maps in decimal format If decimal format is specified.platinum. and maximum pixel.rumba.roi.worklist.med.aut oDisplayCreateExamNote=  false (default) = do not open a new exam note in the Notes window  true = open a new exam note in the Notes window For more information about Platinum properties. see the “Displaying Notes by Default When an Exam Is Opened” section in the Workstation Feature Configuration chapter of the Centricity PACS Workstation Installation and Service Manual.component. the window/level that the user applies to a full-sized image in RA1000 are reflected in the thumbnail image in the Navigator after the user saves the changes. then the decimal precision (range 1–10) is set with platinum properties for the average pixel. Platinum properties enable specifying the precision of ROI statistics displayed on functional maps for MR images.1053)] are displayed in either exponential (the default) or decimal format based on the following platinum property: com.ROIStatistics. 1-1-3: Thumbnail Reflects WW/WL Applied to Image With this release.examnotes.rumba.ExamNotesController. com. Specifying Precision of ROI Statistics on MR Functional Maps With this release. standard deviation.gui.Chapter 3 Release Content com. see the “Configuring Precision ROI Statistics on Functional Maps” subsection in the “Configuring Region of Interest (ROI)” section in the Workstation Feature Configuration chapter of the Workstation Installation and Service Manual for this release of Centricity PACS.ge.desktop.notare.med.ge. The window/level changes to do not affect the presentation state of the image.med. ROI statistics [DICOM tag (0028. 1-1-5: Property to Synchronize Reporting System and RA1000 Worklist Selection (Browse Mode) With this release.image.user. 1.config) supports storing and displaying standard secondary capture images [SOP class UID STANDARD_SEC_CAPTURE (1.med.hideNonSupportedImages= Where:  false (default) = If one or more images in an exam are not supported for display.work.platinum. com. the following message appears: 29 . dose radiation reports of this SOP class from SR modalities. a new Platinum property enables RA1000 to filter out images not supported for display.840. for example. no images are supported for display. and in the currently selected exam. 1-1-7: Support for Standard Secondary Capture Images from SR Modalities With this release. For more detail.ExamTransaction.10008.Chapter 3 Release Content Note: A reporting system window no longer opens in the foreground when an exam is selected (highlighted) in the worklist. a property in the DAS configuration file (das. see “Synchronizing the Reporting System and RA1000 Worklist Selection (Browse Mode)” on page 46.1. the following message appears: Image Type Not Supported for Display  true = filter out images not supported for display Note: Filtering out images not supported for display suppresses both the DICOM header information and the “Image Type Not Supported for Display” message. Filtering occurs on a per image basis and is in addition to the supported modality configuration information at the exam level.  If only one exam is open and no images in the exam are supported for display. see your GE support representative.0 SP7 Centricity PACS release. 1-1-8: Filtering Out Images Not Supported for Display With this release.ge. you can select exams using the Study Description field in the DICOM Query Retrieve dialog box. the following message appears: The exam failed to display Image Type Not Supported for Display  2085198-001 If more than one exam is open. 1-1-6: Study Description Added to DICOM Query Retrieve As of the 4.7)] from structured report (SR) modalities.4. Note: Hanging protocols (DDP) may require modification if they account for display of the message.isu.2.5. For more detail.1. This capability enables Centricity PACS to accept. 4. Table 3-1: SOP Storage Classes Name UID MR Spectroscopy Storage 1.1.For Processing 1.1.12.5.10008.1 Intravascular Optical Coherence Tomography Image Storage .1.10008.1.1.2.4.1.1.1.4.4 Real World Value Mapping Storage 1.840. 2085198-001 30 .1.1.1.840.2.1.1.1.Chapter 3 Release Content The exam failed to display Image Type Not Supported for Display Reverting to last opened exam For more information.4.1.10008.10008.1.4.66.2. Centricity PACS supports IMS deployment on the HP DL560 G8 SSD 400 server and compatible SSD servers from other vendors.1.840.14.2 Enhanced XA Image Storage 1.1.5.1.1.4.5.840.1.2. 1-2-2: Solid-State Drive (SSD) Servers for IMS With this release.2.2 Enhanced US Volume Storage 1.5. Centricity PACS supports Audit Trail and Note Authentication (ATNA) logging in conjunction with Universal Viewer.1.2.10008.840.4.840.5. 1-2: 1-2-1: Centricity PACS Servers More DICOM SOP Classes Supported With this release. 1-2-3: ATNA Logging With this release.For Presentation 1.2 Segmentation Storage 1.5.67 For more information about DAS and SOP classes.10008.6.4.14. the Centricity PACS DICOM application server (DAS) supports additional SOP storage classes.2.10008. see the “Configuring Image Display Options” section in the Workstation Feature Configuration chapter of the Centricity PACS Workstation Installation and Service Manual.5. see the Centricity PACS Servers Service Manual.840.1 Intravascular Optical Coherence Tomography Image Storage . Resolution: With this release. The default is “N” (No). run it only on the local STS.Chapter 3 Section 2: Release Content Issues Resolved in Centricity PACS 4. the OVERRIDE DEFAULT AUTHORITY NAME parameter specifies whether the DEFAULT AUTHORITY NAME (globally assigned domain) is overridden by the Assigning Authority (domain assigned to the user) when the user logs in to CEM. more than one iteration may be needed before an exam is flushed by CAM.Config Display” section. a note is added after the Nap Time parameter: Note: If a site is configured with eView (global STS).  In the “Cache Monitor Page . Table 3-2: Resolved Issues in Centricity PACS 4. Reference Number: 5468283 Problem: After a user logged in to Centricity Exam Manager (CEM). the Cache Manager and Orphan Monitor chapter in the Centricity PACS Servers Service Manual is revised as follows:  In the “Editing CAM Configuration Settings” section. Resolution: With this release.0 SP10. the wrong domain was displayed for the user.0 SP10 Issue Reference Number and Description Reference Number: 5107680 Problem: Add information to the Centricity PACS Servers Service Manual about using CAM when a site is configured for eView (global STS). do not run CAM on the global STS. see OVERRIDE DEFAULT AUTHORITY NAME in the “Client Workstation Configuration Settings” table in the Client Configuration chapter of the Centricity PACS System Administrator Online Help Manual. a note is added after Step 2: Note: If the site is configured for eView. Issues are listed numerically by reference number. 2085198-001 31 .0 SP10 The table below contains issues resolved in Centricity PACS 4. For more information. when Save on Close is enabled. Resolution: With this release.0 SP10 (Continued) Issue Reference Number and Description Reference Number: 8963853 Problem: If a user opened and then quickly closed an exam (with Save on Close enabled). CDPS supports the new codes. 2085198-001 32 . RA1000 supports both new codes (R-1024A and R-1024B) and deprecated codes (Y-X1770 and Y-X1770) for XCCL and XCCM mammography views. Resolution: With this release. Resolution: With this release. Resolution: With this release. RA1000 saves an exam before closing it only if the user modifies the exam.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4. Reference Number: 13294515 Problem: RA1000 did not support view codes R-1024A (XCCL–exaggerated lateral craniocaudal) or R-1024B (XCCM– exaggerated medial craniocaudal) for mammography views. respectively. closing the exam took an abnormal amount of time because RA1000 had to complete loading the exam images before it could save and close the exam. respectively. the ENM generates a notification when a user logs in to a workstation. Reference Number: Not available Problem: The Centricity DICOM Print Server (CDPS) did not support new codes (R-1024A and R-1024B) for XCCL and XCCM mammography views. Reference Number: 13697549 Problem: The Event Notification Monitor (ENM) did not issue a notification when a user logged in to a workstation. in the “Replication upgrade showing downtimes” illustration. when using the IDR with PowerScribe. and it remains in the Dictate mode list in RA1000.e.” and removed from the Dictate mode list in RA1000.0 SP7 Centricity PACS release. its status is “Verified” (i. if the user discards (or closes without saving) a report. in the “Replication upgrade showing downtimes” illustration. the “Run APP_NET config REPSITEB” step was out of order: REPSITEB must be on the network and have a valid hostname and IP address when the “Config Coordmod Server via RHA” step is executed.2 Replication System chapter. in the “Estimated Time Required to Upgrade a Database Replication System” table. Resolution: As of the 4. 2085198-001 33 .2 Replication System chapter. in the Rebaselining and Upgrading a PACS Pre3. if the user discarded (or closed without saving) a report. the Centricity PACS Servers Installation and Upgrade Manual was revised as follows:  In the Rebaselining and Upgrading a PACS Pre-3..  In the Pre-Upgrade Planning chapter.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: In the Centricity PACS Servers Installation and Upgrade Manual. Resolution: With this release. the exam is closed. Reference Number: Not available Problem: When using integrated desktop reporting (IDR) with PowerScribe. the “Run APP_NET config REPSITEB” step was moved between the “APPS on REPSITEB” and “Apps on both Coord / REP” steps. the “Run APP_NET config on REPSITEB” row was moved between the “Config applications REPSITEB” and “Application install Coordmod / Replication servers” rows. the exam was closed. marked “Dictated.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4. status is unchanged). a user incorrectly deleted the remaining images manually. after first paragraph in “Monitoring Storage Onion Layers” subsection in the “Storage Onion” section. thereafter.  In Image Volume and Short-Term Storage Management chapter. If CAM fails to purge images from an IV. Resolution: With this release. after first paragraph in “Storage Onion” section and at the top of “Removing a Device (IV) from an STS” section. Reference Number: Not available Problem: When the database language was Danish and the user tried to create/search folder formats using the CA tool. after first paragraph in “CAM Overview” section. Contact GE support for more information.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: When retiring an IV at a site. disposition of the remaining image files must be resolved before moving or retiring the IV. 2085198-001 34 . Resolution: The following note: Caution: Never manually delete images from an Image Volume. no results were returned because the CA tool queried the Danish database with an English string. Centricity PACS System Administrator Online Help Manual  In the System Monitor chapter. Is added to the these manuals:   Centricity PACS Servers Service Manual  In Cache Manager and Orphan Monitor chapter. the CA tool gets the Danish string from the database for queries. the IV was flushed to 1% following proper procedures. the DICOM tag ST (0070. Resolution: The following text is removed from the “Using Image Filters” section in the Image View Area chapter of the Centricity PACS RA1000 Workstation and Exam Manager Operator Manual: If you perform any other actions on the images. Adjust the window/level. Reload a series. byte swapping from OB to OW by DAS is now correct. 2085198-001 35 . reloading a series. In RA1000. or closing/reopening an exam. the annotations contained meaningless characters.0006). the filter effects are erased. For this reason. The workaround is to manually delete or modify the DICOM tag. a third-party viewer may display an annotation with the delimiters. adjusting the window/level. is implemented with delimiters. an unformatted text value. Close and reopen an exam. the filter changes are erased if you:     Cine though the series. spine-labeling annotation “L1” may be rendered as "L1:~:0:~:0:~:" by a third-party viewer. Reference Number: Not available Problem: When a third-party viewer displayed Centricity PACS images with spine-labeling annotations.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4. For example.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: The Centricity PACS RA1000 Workstation and Exam Manager Operator Manual incorrectly stated that filter effects applied to an image were erased by cining through the series. Resolution: With this release. Note: Centricity PACS conforms to DICOM standards. Reference Number: Not available Problem: The image displayed in RA1000 was “noisy” due to incorrect byte swapping from OB to OW by DAS. For example. Because exams with lta_stat=R are targets for deletion by CAM during a purge.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: When setting up a remote archive destination using the CA tool. if “Archive” was chosen at Auto Send Reason. Centricity web service uses standard identifiers to reconcile data across applications. Resolution: In the Configuration chapter of the System Administrator Online Help Manual. any nonarchived exam with lta_stat=R was a potential data loss. Resolution: With this release.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4. the status of any nonarchived exam (lta_stat=N) sent to the destination will be set to “R” (lta_stat=R). and the exam will not be archived to the PACS LTA. in the “Destinations” section. a nonarchived exam (lta_stat=N) sent to the destination had its lta_stat value set to “R” and was not archived to the PACS LTA. Reference Number: Not available Problem: Study-level information (such as accession number) that was modified using Centricity Exam Manager or via the RIS was not propagated to AW Server because the study identifiers used by Centricity web service differed from those used by other services to reconcile data. 2085198-001 36 . Because exams with lta_stat=R are targets for deletion by CAM during a purge. any nonarchived exam with lta_stat=R status is a potential data loss. the “Adding and Editing a Destination” section is revised as follows:  The introductory paragraph includes remote archives: Destination sites are added to the IMS database for:   C2C transfers  Local query-retrieve devices  Remote archives A caution note is added to the step to select an Auto Send Reason: Caution: If you choose “Archive” for an Auto Send Reason to an archive destination. Reference Number: Not available Problem: In PowerScribe.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: The Configuring Language Support chapter in the Centricity PACS Servers Service Manual did not state that language configuration was also required on the client. after the user signs the report and quickly opens a new study. an out-of-context situation might occur. the font and background colors were the same in Lights Off skin in RA1000. making the text illegible. the Setting Up a PACS Virtual Environment appendix in the Centricity PACS Servers Installation and Upgrade Manual is updated. Resolution: With this release. Resolution: With this release. Information is displayed correctly when the Lights Off skin is used. To configure language support for other clients. a new study opens only if the study is no longer in a “pending” state in Centricity PACS. Reference Number: Not available Problem: After merging patient exams using the web-based Centricity Exam Manager launched from RA1000. Resolution: The following note is added at the beginning of the Configuring Language Support chapter of the Centricity PACS Servers Service Manual: Note: This chapter describes how to configure language support on the Centricity PACS servers. To configure language support on RA1000 workstations.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4. see the Language Configuration chapter in the Centricity PACS Workstation Installation and Service Manual. Resolution: A code fix resolved this issue. see the client and/or service documentation for the supported clients. Reference Number: Not available Problem: The information about Centricity PACS in a VM environment was out of date. 2085198-001 37 . Reference Number: Not available Problem: In the Centricity PACS Servers Service Manual. AW Server launches when an exam is opened in a Universal Viewer– AW Server integrated workflow. adding a NAS IV to an STS using RHA succeeds regardless of a space character in the STS name. Resolution: With this release. the “Setting up SFTP for Security Audit or ENM Log” section in the Database Maintenance and Administration chapter incorrectly referred to FTP as secure FTP (SFTP). occurrences of “SFTP” are changed to “FTP.0 SP7 Centricity PACS release. Resolution: With this release.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4. Reference Number: Not available Problem: Using the Image Volume-STS Management feature of RHA to add a NAS IV to an STS failed if the STS name contained a space character.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: In RA1000. switching among worklists does not affect the column widths. Resolution: In the Centricity PACS Servers Service Manual.” Reference Number: Not available Problem: In a Universal Viewer–AW Server integrated workflow. 2085198-001 38 . occasionally AW Server did not launch when an exam was opened. Resolution: As of the 4. switching among worklists with the same column widths resulted in the column widths changing. extend2.1111) Referenced Performed Procedure Step Sequence.ge.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: RIS-IC–PACS integration in a PACS-driven workflow failed because a Platinum extend property was set by default for a RIS-driven workflow: com.platinum. See “Platinum Extend Property Default in RIS-IC–PACS Integration” on page 47.ge. Reference Number: Not available Problem: Generated KOS via RA1000 did not include DICOM tag (0008. the default value of the platinum extend property is false: com. Reference Number: Not available Problem: In Centricity PACS–LDAP integration.idxWorklistDrivenMacro=false Set the value to true only for a RIS-driven workflow. a web service call authenticates LDAP passwords (both persistent and nonpersistent) when users log in to AW Server from RA1000. Resolution: With this release.platinum. Reference Number: Not available Problem: The DICOM implementation version name was not updated in Centricity PACS. Resolution: With this release. generated KOS via RA1000 includes DICOM tag (0008. The default port is 80.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4.extend.extend2. if LDAP passwords were not persistent.extend.1111). 2085198-001 39 .med. The mt_port parameter in the /usr/local/awspacswebsrv/config/ config_ws. Resolution: With this release.med.idxWorklistDrivenMacro=true Resolution: With this release. Centricity PACS reflects the current DICOM Conformance implementation. users could not log in to AW Server from RA1000.properties file specifies the port for logging in to AW Server from RA1000. Resolution: With this release. 2085198-001 40 . Reference Number: Not available Problem: Centricity PACS documentation and the Extends online help refer to OrthoVew 2. which starts RA600 from the Patient Information tab of Centricity Exam Manager (CEM) in RA1000. in the Workstation Installation and Service Manual. Reference Number: Not available Problem: During installation of the Centricity PACS IMS.0 SP5. Resolution: A code fix resolved this issue: The generic addlogin script for ASE is not overridden. empty or rejected series are not counted in C-FIND return of information.0. Reference Number: Not available Problem: C-FIND return of series and study information included empty or rejected or series in the counts. Resolution: With this release. which the vendor no longer supports. See “QC Tool Button Is Not Configurable” on page 46.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: In Centricity PACS 4.0.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4.6 extend.6 extend. the following sentence replaces the content in the “OrthoView” section of the Extends Installation appendix: OrthoView no longer supports the OrthoView 2. the generic addlogin script for Sybase Adaptive Server Enterprise (ASE) was overridden by the addlogin script for a specific version of ASE. the release notes stated that the Launch QC Tool button. All other references to the OrthoView extend are removed from the Centricity PACS documentation and Extends online help. the error is corrected. could be configured to launch other QC tools. Resolution: With this release. ” and then cancelled instead of saving the exam images when prompted (per the Prompt To Save Image Before Closing preference). a nameless STS volume could be created. 2085198-001 41 . Reference Number: Not available Problem: In RIS-IC–PACS integration with IDR in RIS-IC–driven mode.Chapter 3 Release Content Table 3-2: Resolved Issues in Centricity PACS 4. RA1000 failed to launch when an exam was selected in RIS-IC because extend properties were not found. Resolution: With this release. an out-of-context situation occurred in Dictate mode when the user marked a report “Dictated. the Cancel option is removed from the Prompt to Save dialog box to maintain context between exam and images. in Dictate mode. an STS volume cannot be created unless it has a name. Resolution: With this release. Resolution: With this release. a code fix resolved the issue.0 SP10 (Continued) Issue Reference Number and Description Reference Number: Not available Problem: In RHA. Reference Number: Not available Problem: In a Centricity PACS configuration without integrated reporting. 0 SP10. see the “Pre-Upgrade Planning” chapter in Centricity PACS Servers Installation and Upgrade Manual for this release of Centricity PACS. For more information. Illustration 3-1:Upgrade Paths 2085198-001 42 .Chapter 3 Section 3: Release Content Upgrade Paths Illustration 3-1 depicts upgrade paths to Centricity PACS 4. . Viewing the Calendar in the CA Tool When the calendar in the CA tool is displayed. Section 2: 2-1: Browser Behavior When Using the Centricity Administration Tool Safari for Windows Issue When users click OK to close the About window in the Centricity Administration (CA) tool. . . . Opera). . . . . . . Note: 2-2: This issue occurs only when using the CA tool with Safari for Windows.Chapter 4 Open Issues This chapter includes: Section 1: Report Palette Out of Synch . . they are logged out of the tool. . .. . . . . . occasionally the Report Palette will synch with the current exam's study information. . . . . whereas the URL area at the top of the calendar is blank in other browsers (e. . . . . . . . the URL appears at the top of the calendar window in some browsers (e. . and clicks on the Synchronize Report with Exam in This Region button in the prior exam's viewport.g. .g. . Illustration 4-1:Calendar with URL 2085198-001 43 . . . . .. . . 43 Section 1: Report Palette Out of Synch When a user has an exam open with a current and a prior exam. . Internet Explorer). . . . . . 43 Section 2: Browser Behavior When Using the Centricity Administration Tool. Firefox). If Cancel is selected. a security warning appears in some browsers (e. when User Group is chosen from the drop-down menu on the User page.Chapter 4 Open Issues Illustration 4-2:Calendar without URL 2-3: Security Prompt When Navigating the CA Tool On the Users & Functions menu in the CA tool. If Continue (or Send. depending on the browser) is selected. the User Group page is displayed. the User page is displayed even though the dropdown menu shows User Group.. Illustration 4-3:Security Warning Illustration 4-4:Page Displayed When Security Warning Is Canceled 2085198-001 44 .g. breast tomosynthesis images). . . . . . . . . Your site administrator can set a Platinum property on the workstation to filter out images that are not supported for display. the “Image Type Not Supported for Display” message appears. 46 Section 3: Servers Service Manual . . . . . . .0.g. . . . . which Norwegian-language users access via the RA1000 Workstation and Exam Manager Operator Manual. . . 45 . . . . . . .0 SP10 release notes. replace the note in “Navigating through Images” subsection with the following note: Note: 1-2: If the workstation cannot display a type of image (e. in the “Navigating in Exams” section. . . and Workstation Quality Control Manual support the Norwegian language. 49 For a PDF copy of the Centricity PACS 4. . . . is delivered in English. . add the following note at the end of the “Accessing the Extends Online Help” section: Note: 2085198-001 In Centricity PACS 4. . . . . . . . Section 1: 1-1: RA1000 Workstation and Exam Manager Operator Manual Filtering Images Not Supported for Display In the Image View Area chapter. . . . . . . . .Chapter 5 System Documentation Additions and Corrections This chapter includes: Section 1: RA1000 Workstation and Exam Manager Operator Manual . . the RA1000 workstation GUI. . . . . . . . 47 Section 4: System Administrator Online Help Manual . . . RA1000 Workstation and Exam Manager Operator Manual. . . . . . The Extends Online Help. . Filtering out images suppresses both the DICOM header information and the “Image Type Not Supported for Display” message. . . . . . Extends Online Help Not Available in Norwegian In the Centricity Extend Applications chapter. . visit the Common Documentation Library (CDL). . . . . . . . . . . . . . . . 45 Section 2: Workstation Installation and Service Manual . . . . . . .. . . . . . . . . . . . the report for Exam A is saved before closing. 2-1-1: Launching RA600 from CEM In RA1000.med.component.ge. if Exam B is selected in the worklist.rumba.worklist. If the Auto Save Report (Utilities > Reporting Integration Prefs) is checked.Chapter 5 System Documentation Additions and Corrections Section 2: 2-1: Workstation Installation and Service Manual QC Tool Button Is Not Configurable Add the following section to the Centricity Exam Manager Configuration chapter. Synchronizing the Reporting System and RA1000 Worklist Selection (Browse Mode) Add the following section to the Workstation Features Configuration chapter.desktop.SyncVRwithWL=true Where:  true (default) =  Important When Exam A and its report are open. the report for Exam A is closed. the report for Exam A is closed without saving changes. the user is prompted to select verified studies for report association. Note: 2-2: The button cannot be configured to launch any other QC tool. 46 . and if Prompt for Report Association is checked.  If Exam A is selected again. the Launch QC Tool button on the Patient Information tab of Centricity Exam Manager (CEM) launches RA600. Otherwise. 2-2-1: Synchronizing the Reporting System and RA1000 Worklist Selection (Browse Mode) A Platinum property with its default setting (true) ensures that context is maintained between the reporting system and RA1000 worklist (Browse mode) when an exam is selected (highlighted): com. if the Automatically Synchronize on PACS Context [Browse] preference (Utilities > Reporting Integration Prefs) is checked:  The saved report for Exam A is opened (see important note above) OR  2085198-001 A new report for Exam A is opened. Note: Section 3: 3-1: Hanging protocols (DDP) may require modification if they account for display of the “Image Not Supported for Display” message.extend. 2-4: DDPs and Filtering Images Not Supported for Display Add the note below at the end of the “Filtering Images Not Supported for Display” section in the Workstation Feature Configuration chapter. and a new reporting system window is opened when Exam B is selected in the worklist.” as indicated below. 2085198-001 47 . “Configuring ENM for HL7 Synchronization from PACS to EA.med.platinum. in Section 5. the extend property default is a PACS-driven workflow: com. Platinum Extend Property Default in RIS-IC–PACS Integration Add the section below to the Workstation Feature Configuration chapter. “IMS Database Settings for HL7.Chapter 5 System Documentation Additions and Corrections  2-3: false = the reporting system window for Exam A is not closed.ge.” revise Section 5-2. Servers Service Manual Setting ENM Configuration for HL Timeout In Chapter 5. 2-3-1: RA1000 with RIS-IC Integration In RIS-IC–PACS integration.idxWorklistDrivenMacro=false Where: false (default) = PACS-driven workflow true = RIS-driven workflow Set the value to true only for a RIS-driven workflow. Configuring Event Notification Manager.extend2. “IMS Database Table client_config”: client_id app_name pname pvalue pindex pdesc HL ENM Timeout 120–1200 1 Timeout interval in seconds Important: For a production site. The busier the site. the larger the value should be. set the HL timeout interval between 120 and 1200 seconds. the larger the value should be.” revise the last row: pname pvalue pindex pdesc Timeout 120–1200 1 Timeout interval in seconds Important: For a production site. “Add a Timeout record. The busier the site. the larger the value should be.Chapter 5 System Documentation Additions and Corrections  In Step 8. Queue processing is adversely affected if the timeout interval is too low. set the HL timeout interval between 120 and 1200 seconds. revise the last row in Table 5-16. set the HL timeout interval between 120 and 1200 seconds.  In Step 12. Queue processing is adversely affected if the timeout interval is too low. “IMS database table client_config”: client_id app_name pname pvalue pindex pdesc HL ENM Timeout 120–1200 1 Timeout interval in seconds Important: For a production site.” revise the last sentence: The pvalue should be between 120 and 1200. Queue processing is adversely affected if the timeout interval is too low.  client_id app_name <subscriber ENM name> In Table 5-16. 2085198-001 48 . “IMS database table client_config.  In Step 10d. The busier the site. revise the last row in Table 5-14. “Searching for a User.   In Table 9-2.Chapter 5 System Documentation Additions and Corrections Section 4: 4-1: System Administrator Online Help Manual Enabling a User to Search for Another User In Chapter 9. add the content below. and Functions. Groups.” add the following prerequisites after the section heading: Prerequisites: You must have the following privileges: 2085198-001  CATViewUsers&Functions  SearchUser 49 .” add the following row: Privilege Description SearchUser To search for a user In Section 5-2. Users. “IMS Function Privileges (for PACS only). IL 60010 USA Tel: +1 847 277-5000 Fax: +1 847 277-5240 2085198-001 European Headquarters GE Medical Systems SCS 283 rue de la Minière 78530 BUC. 1 Hua Tuo Road.GE Healthcare gehealthcare. Zhang Jiang Hi-Tech Park Shanghai 201203 China Tel: 8621-38777888 Fax: 8621-38777499 50 . France Asia Headquarters GE Healthcare 1 BLD-3F No.com Corporate Headquarters GE Healthcare 540 W Northwest Highway Barrington.