BSC6900 GSM V900R011C00SPC700 Parameter Reference.xls



Comments



Description

BSC6900 GSM V900R011C00 Parameter ReferenceHuawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, plea headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: Email: http://www.huawei.com [email protected] Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawe Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this docu service. For any assistance, please contact our local office or company out prior written consent of Huawei Technologies Co., Ltd. spective holders. ade in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this doc recommendations in this document do not constitute the warranty of any kind, express or implied. Purpose This document provides information about the BSC6900 parameters, including the meaning, value, and usage of th Intended Audience •Network planners •Field engineers •System engineers •Shift operators Organization Each parameter is described in the following aspects. Description Parameter ID Parameter Name NE MML Command Meaning Feature ID Feature Name Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Access Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute about the BSC6900 parameters, including the meaning, value, and usage of the parameters. ollowing aspects. Remarks Simple string for identifying a parameter Full name of the parameter NEs on which the parameter is set Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command Functions, functioning ways, and protocols of the parameter Relevant feature ID Features using the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether this parameter is read/write or read only Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services Cautions to be taken during the modification Requirements on how to validate the modification of the parameter. For example, you may need to reset the device to validate the modification. Impact of the radio parameter on the network performance Version in which this parameter is introduced Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter Parameter ID Parameter Name NE MML Command Meaning ABCDownQuality ABCUpQuality Downlink Quality Threshold in Assigning Better Cell BSC6900 Uplink Quality Threshold in Assigning Better Cell BSC6900 Maximum Better Cell Assigning Duration BSC6900 SET Downlink quality level threshold for GCELLHOAD( the MS to be assigned with a Optional) channel of the better cell. SET Uplink quality level threshold for the GCELLHOAD( MS to be assigned with a channel Optional) of the better cell. The maximum duration for the BSC to select the best cell according to SET MRs in the MS assigning GCELLHOAD( procedure. The BSC assigns the Optional) channel of the serving cell to the Whether to enable the BTS to support bypass function. HDLC ADD BTS and IP BTS do not support BTS(Optional) this parameter. Whether to permit Abis flow control. SET The flow control function helps in GCELLCCCH( better call management. If Optional) congestion occurs, theFlow Control Used along with "Abis system Timer 2" to control the change in SET cell flow control levels.When the BSCTMR(Opti flow control level in the cell onal) changes, the values ofFlowMAX Used along with "Abis MS Control Timer 1" to control the change in SET cell flow control levels.When the BSCTMR(Opti flow control level in the cell onal) changes, the values of MS MAX This parameter controls the SET strategy for idle timeslot selection BTSOTHPAR and optimization by the PS A(Optional) channels. This parameter controls whether the strategy for timeslot SET configuration and optimization is BTSOTHPAR started. When this parameter is set A(Optional) to ON, the for enabling the BTS Threshold bundled idle timeslots local switching. When the SET congestion rate at the Abis BSSLS(Option interface exceeds this threshold, al) the BTS local switching iswhether This parameter specifies enabled. SET to enable the Abis resource BTSFLEXABI adjustment TCHH function. SPARA(Optio It specifies whether the TCHH is nal) preferentially allocated to the MS Interval between detection of the Abis timeslot being in idle state and SET releasing of the Abis timeslot. GCELLPSCH When channels are idle, the timer M(Optional) is started. When the timer expires, ABCWaitMaxTime Abis ByPass ABISBYPASSMODE Mode BSC6900 ABISFCEN SDCCH Congestion Flow Control Allowed BSC6900 AbisFCTimer1 Abis Flow Control Timer 1 BSC6900 AbisFCTimer2 Abis Flow Control Timer 2 BSC6900 Abis Idle TS ABISIDLETSALLOC Allocate Strategy BSC6900 ABISIDLETSCFGS WITCH Abis Idle TS Configure Switch BSC6900 Abis Jam Rate AbisJamThreshold2 for BTS Local StartLs Switch BSC6900 ABISRESADJTCHH TCHH Function FUNSW Switch Timer of Releasing Abis Timeslot BSC6900 ABISTSFREETM BSC6900 AbisVer Abis Interface Tag BSC6900 SET BSCBASIC(O Phase tag for GSM protocols that ptional) the Abis interface supports ADD AISSCFG(Opti onal) Duration available for the BTS to collect the AB after the TRX or channel is activated (threshold) for Mean opinion score judging an abnormal call. The BTS SET computes the MOS of a call OTHSOFTPA periodically and reports the call RA(Optional) MOS to pulse type of the PRACH, Access the BSC in custom uplink PTCCH and packet control SET acknowledge message of the MS. GCELLPSBA 8bit: 8 bit pulse access mode; SE(Optional) 11bit: 11 bit pulse access mode. SET GCELLPRAC H(Optional) Access control class of the MS Subcell preferred during the incoming inter-BSC handover to SET the concentric cell. In the case of GCELLHOIUO incoming inter-BSC handover to (Optional) the concentric cell, the channels in SET GCELLPSOT HERPARA(Op Whether the initial service is uplink, tional) downlink to compress the address ADD Whether or neutral PPPLNK(Opti and control fields. If this parameter onal) is set to ENABLE, the address and ADD control area compression is MPGRP(Optio enabled. If this parameter is set to ADD BTSPPPLNK( Optional) A flag bit indicates Whether to ADD support the compression of the BTSMPGRP( address and control fields. This parameter specifies whether SET to receive the CS paging request BSCPSSOFT from A interface when the MS uses PARA(Optiona a PS service. This parameter is l) used to control theMSs where to Used for notifying paging retrieve relevant parameters during SET cell reselection. GCELLIDLEA The default value of this parameter D(Optional) is 0 in system set (ACS)[F], Active coding message 3 and, has indicates a set of full-rate coding SET rates currently available for calls. GCELLCCAM The AMR is a set of multiple R(Optional) speech coding and decoding rates. ABLASTTIME Duration of BTS Collecting AB[100 Millisecond] BSC6900 AbnormalMosThresh Abnormal Voice old MOS Threshold BSC6900 ACCBURST Access Burst Type BSC6900 ACCCONTROLCLA Access Control SS Class BSC6900 ACCESSOPTILAY Incoming-to-BSC HO Optimum Layer BSC6900 AccStaServiceType PS Initial Access Service Type BSC6900 Address and control field compress ACFC BSC6900 ACFC Support Address and Control Field Compress BSC6900 A Interface ACOOPERATPAGIN Paging CoGSWITCH ordination Switch BSC6900 Additional Reselect Parameter ACS Indication BSC6900 ACTCDSETF AMR ACS[F] BSC6900 ACTCDSETH AMR ACS[H] BSC6900 ACTCDSETWB AMR ACS[WB] BSC6900 ACTL2REEST Activate L2 Reestablishment Valid Time of BTS Resource Activation BSC6900 Active coding set (ACS)[H], indicates set of half-rate coding SET rates currently available for calls. GCELLCCAM The AMR is a set of multiple R(Optional) speech coding and decoding rates. Active coding set (ACS)[WB], indicates a set of wide-band coding SET rates currently available for calls. GCELLCCAM The AMR is a set of multiple R(Optional) speech coding and decoding rates. Whether to activate the function of L2 re-establishment. If this function SET is activated, the BSC starts the GCELLSOFT( attempt of L2 re-establishment Optional) when the BSC receives an ERR ADD AISSCFG(Opti Valid duration of the reserved TRX onal) or timeslot alarm lower threshold. AC voltage When the input AC voltage is lower SET than the value of this parameter, an BTSAPMUBP( alarm indicating the abnormal AC Optional) is reported. SET The BTS reports an alarm if the AC BTSDPMUBP( voltage exceeds the value of this Optional) parameter. SET BTSDPMUBP( Optional) SET BTSAPMUBP( Optional) The BTS reports an alarm if the AC voltage is lower than the value of this parameter. an alarm if the AC The BTS reports voltage exceeds the value of the AC voltage alarm upper threshold. When the input AC voltage is higher than the value of this Whether to hand over an MS to another channel during an intra-cell handover through the assignment process Communication address of the CBUS3 on the bus 485. The configuration of this parameter must be consistent with the actual physical connection. Otherwise, the Interval for requesting the bandwidth for the secondary link when the system is not in congestion state ACTTIME BSC6900 ACVLTHD AC Voltage Lower Threshold BSC6900 ACVOLALARMH AC Overvoltage Alarm Threshold BSC6900 ACVOLALARML AC Undervoltage Alarm Threshold BSC6900 AC Voltage ACVUTHD Upper Threshold BSC6900 Assignment Procedure in ADAPTASSIGNMEN Intra-Cell HO TFLOW Allowed BSC6900 ADDR AddTransBwInt AddTransBwNum Communication Address Sub-Link Bandwidth Request Interval When Not Congested Bandwidth for Secondary Link When Not Congested BSC6900 BSC6900 BSC6900 SET GCELLSOFT( Optional) SET BTSFMUABP( Optional) SET BTSAPMUBP( SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT Bandwidth requested each time for PARA(Optiona the secondary link when the l) system is not in congestion state ADJBSCDPC Adjacent BSC DPC BSC6900 ADJMODE Adjustment Mode BSC6900 Support EGPRS ADJUSTULMCSTYP Uplink MCS E Dynamic Adjust Auto Download Active Function Switch BSC6900 ADLDACT BSC6900 ADMODE Auto Download Mode BSC6900 ADMSTAT Administrative State BSC6900 ADMSTAT Administrative State BSC6900 ADMSTAT Administrative State Offset Time Adjustment End Time Load Threshold of Offset Adjustment Offset Time Adjustment Switch BSC6900 ADD EXTNCELL(M andatory) COL BSCSYNCINF SET BTSEXCURSI ON(Mandatory ) SET SET GCELLEGPR SPARA(Optio nal) SET BTSAUTODL DACTINFO(O ptional) SET BTSAUTODL DACTINFO(O ptional) SET GCELLADMS TAT(Mandator y) SET GTRXADMST AT(Mandatory ) SET GTRXCHANA DMSTAT(Man datory) The destination signaling point (DSP) of the adjacent BSC must be an Iur-g DSP. Whether to adjust the BTS offset manuallydynamically adjusting the Mode of or automatically EGPRS uplink encoding scheme. Value 0 indicates dynamic adjustment of EGPRS uplink coding scheme is not supported; This parameter specifies whether to enable the BTS software autoloading and auto-activation function. If this parameter is set to Yes, parameter specifies the This the BTS software is automatic load mode of the BTS software. If this parameter is set to common download, common loading is performed on the Administrative state of a cell Administrative state of the TRX Administrative state of the channel ADTET BSC6900 ADTLOD BSC6900 ADD AISSCFG(Opti End time for adjusting the offset onal) time Cell load threshold for adjusting the ADD offset time. If the load threshold is AISSCFG(Opti exceeded, the offset time is not onal) adjusted. ADD AISSCFG(Ma ndatory) Offset Time Adjustment Switch ADD AISSCFG(Opti Start time for adjusting the offset onal) time ADTON BSC6900 ADTST Offset Time Adjustment Start Time BSC6900 Advanced Alarm ADVALMMGRULET Management P Rule Type BSC6900 ADVER1 BTS Software Version 1 BSC6900 ADVER2 BTS Software Version 2 BSC6900 ADD BTSALMMGM RULE(Mandat ory) SET BTSAUTODL DACTINFO(O ptional) SET BTSAUTODL DACTINFO(O ptional) AEC_Echo_Path_De AEC Echo Path lay Delay BSC6900 Advanced alarm management rule type parameter specifies the This software version 1 that is automatically loaded and activated. The version of the BTS software stored on the OMU must be This parameter specifies the software version 2 that is automatically loaded and activated. The BTS software stored on the OMU echo path is traced,with echo If the must be consistent the this is judged and controlled according SET to the trace result of the echo path TCPARA(Opti parameters. Otherwise, the echo is onal) judged and controlled according to SET This parameter is used for echo TCPARA(Opti judgment and control when the onal) echo parameters are notis lower If the local input voltage traced. than the value of this parameter SET and the remote end transmits the TCPARA(Opti voice signal, the AEC function uses onal) the comfort due toto replace the Extra delay noise the transmission line. This parameter should be set SET according to the actual conditions TCPARA(Opti and is applicable to satellite onal) transmission. is used to This parameter determine whether there are SET speech signals at the local end. If TCPARA(Opti the local SNR is lower than the onal) value of this parameter, echo SET This parameter indicates whether TCPARA(Opti the acoustic echo cancellation onal) (AEC) functional switch is on or off. SET TCPARA(Opti Threshold for detecting the AEC onal) performance SET TCPARA(Opti Time for detecting the AEC onal) performance Counter for radio link failures during an AMR full rate call. See SET the description of "Radio Link GCELLCCBA Timeout" in "SET SIC(Optional) GCELLCCBASIC". AEC_Echo_Return_ AEC Echo Return Loss Loss BSC6900 AEC_Nlp_Gate AEC Nlp Gate BSC6900 AEC_Path_Delay AEC Path Delay BSC6900 AEC_SNR_Gate AEC SNR Gate BSC6900 AEC_Switch AEC Switch BSC6900 AEC Detect AECDetectThreshold Threshold BSC6900 AECDetectTime AEC Detect Time BSC6900 AFRDSBLCNT AFR Radio Link Timeout BSC6900 AFRSAMULFRM AFR SACCH Multi-Frames BSC6900 Number of SACCH multiframes during an AMR full rate call. See SET the description of "SACCH MultiGCELLCCBA Frames" in "SET SIC(Optional) GCELLCCBASIC". ADD GPS(Mandato ry) GPS receiver ID ADD GPS(Mandato ry) GPS receiver type. failures Counter for radio link during an AMR half rate call. See SET the description of "Radio Link GCELLCCBA Timeout" in "SET SIC(Optional) GCELLCCBASIC". multiframes Number of SACCH during an AMR half rate call. See SET the description of "SACCH MultiGCELLCCBA Frames" in "SET SIC(Optional) GCELLCCBASIC". SET ALMPORT(Ma ndatory) Alarm ID SET ALMBLKPAR A(Mandatory) SET ALMLVL(Man datory) SET ALMSHLD(Ma AGPSRECEIVERID GPS ID BSC6900 AGPSRECEIVERTY PE GPS type BSC6900 AHRDSBLCNT AHR Radio Link Timeout BSC6900 AHRSAMULFRM AHR SACCH Multi-Frames BSC6900 AID Alarm ID BSC6900 AID Alarm ID BSC6900 Alarm ID Identifier of the alarm. This parameter uniquely identifies an alarm. AID Alarm ID BSC6900 AID Alarm ID BSC6900 ADD Identifier of the alarm. This OBJALMSHL parameter uniquely identifies an D(Optional) alarm. SET ENVALMPAR A(Mandatory) SET BTSENVALM PORT(Option al) ADD BTSOBJALM SHLD(Mandat ory) Identifier of the alarm. This parameter uniquely identifies an alarm. AID Alarm ID BSC6900 AID Alarm ID. BSC6900 Alarm ID AID Alarm ID. BSC6900 Alarm ID AIDDELAYPROTEC Aiding Delay TTIME Protect Time BSC6900 Delay time for mutual-aid detection on a cell after the cell is initialized. SET When the cell initialization has just GCELLSOFT( finished, the cell is in an unstable Optional) state. Mutual-aid detection at this ADD OBJALMSHL D(Optional) ADD BTSOBJALM SHLD(Mandat ory) SET OTHSOFTPA RA(Mandatory ) AIDST Alarm Select Type BSC6900 Type of alarm selection AIDST Alarm Select Type A Interface Msg [End2end User Tracing] BSC6900 AInterMsgTrace BSC6900 Alarm selection mode Whether to trace A-interface messages during end-to-end user tracing. The end-to-end tracing is conducted throughout the network. The A-interface tracing results can A IF FC Discard AINTFFCDISCLUEN LOC UP Enable BSC6900 SET Whether to allow flow control for BSCFCPARA( the location update services during Optional) the A interface flow control SET whether to allow flow control for the BSCFCPARA( mobile-originated services during Optional) the A interface flow control SET BSCFCPARA( Optional) Whether to allow flow control for the mobile-terminated services during the Aallow flow flow control Whether to interface control for the other services including SET emergency call, call re-establish, BSCFCPARA( and LMU services during the A Optional) interface flow control SET Whether to enable the A interface BSCFCPARA( flow control mechanism in the Optional) BSC6900 method used by the Flow control BSC6900. Flow control method at SET the Abis interface: When receiving BSCFCPARA( a channel request message, the Optional) BSC6900 begins flow control on SET BSCFCPARA( Rate of discarded services in level Optional) 1 of the A interface flow control SET BSCFCPARA( Rate of discarded services in level Optional) 2 of the A interface flow control AINTFFCDISCMOC A IF FC Discard EN MOC Enable BSC6900 AINTFFCDISCMTC A IF FC Discard EN MTC Enable A IF FC Discard Other Service Enable BSC6900 AINTFFCDISCOSE N BSC6900 AINTFFCEN A Interface Flow Control Enable BSC6900 AINTFFCMETHOD A Interface Flow Control Method BSC6900 A IF FC Service AINTFFCRSRATE1 Rate in Level 1 BSC6900 A IF FC Service AINTFFCRSRATE2 Rate in Level 2 BSC6900 A IF FC Service AINTFFCRSRATE3 Rate in Level 3 BSC6900 SET BSCFCPARA( Rate of discarded services in level Optional) 3 of the A interface flow control SET BSCFCPARA( Rate of discarded services in level Optional) 4 of the A interface flow control SET BSCFCPARA( Rate of discarded services in level Optional) 5 of the A interface flow control SET BSCFCPARA( Rate of discarded services in level Optional) 6 of the A interface flow control CSD service redundancy level, SET which is configured to decrease the BSCBASIC(O data loss rate during transmission ptional) in A over IP mode. SET TCPARA(Opti onal) Fixed gain value in fixed gain mode SET TCPARA(Opti onal) Target level in fixed level the This parameter restrains mode maximum gain to the input signal. It SET is valid only when "ALC Mode" is TCPARA(Opti "FIXEDLEVEL" or "ADAPTIVE". If onal) the parameter is set to a small SET TCPARA(Opti Maximum target level in adaptive onal) ALC mode SET TCPARA(Opti Mimumum target level in adaptive onal) ALC mode SET TCPARA(Opti onal) ALC level control mode SET TCPARA(Opti Whether to enable the adaptive onal) level control (ALC) function A IF FC Service AINTFFCRSRATE4 Rate in Level 4 BSC6900 A IF FC Service AINTFFCRSRATE5 Rate in Level 5 BSC6900 A IF FC Service AINTFFCRSRATE6 Rate in Level 6 CSD Service AIPCSDSRVRDNDL Redundancy EV Level BSC6900 BSC6900 ALC_Fix_Gain ALC Fix Gain BSC6900 ALC_Fix_Target_Le ALC Fix Target vel Level BSC6900 ALC_Max_Gain ALC Max Gain BSC6900 ALC_Max_Target_L ALC Max Target evel Level BSC6900 ALC_Min_Target_Le ALC Min Target vel Level BSC6900 ALC_Mode ALC Mode BSC6900 ALC_Switch ALC Switch BSC6900 ALIVERETRY Alive Retry BSC6900 Retry times after the timer for the reply from the peer expires during SET the NSVC live test. If the reply is BSCNSPARA( not received after the system Optional) resends the message according to SET BSCNSPARA( Optional) Duration of the timer to wait for the reply from the peer during the NSVC livethe bandwidth occupied Specifies test when the " transmission resource ADD group type " is IP and the " RSCGRP(Man bandwidth mode " is datory) HALF_DUPLEX. SET BSCPSSOFT PARA(Optiona Whether to reassign the TBF for a l) different Trx When this parameter is set to ON, the GMM/SM signaling service is SET assigned only one PDCH; GCELLPSCH otherwise, the GMM/SM signaling M(Optional) service is assigned one or more Maximum ratio of the number of SET AMR half rate channels to the total GCELLCHMG number of channels in a cell. When BASIC(Option the resource allocation principle is al) determined allow EDA multiplex. Whether to by the BSC, no AMR SET "Not Allow": the TBF of the EDA BSCPSSOFT cannot be multiplexed with other PARA(Optiona TBR; "Allow": the TBF of the EDA l) can be multiplexed measure report Number of allowed with other TBF. missed. If the number of allowed SET measure report missed exceeds GCELLNC2P this value, the previous measure ARA(Optional) report is invalid.of the number of Maximum ratio SET half rate channels to the total GCELLCHMG number of channels in a cell. When BASIC(Option the resource allocation principle is al) determined by the BSC, that all Value ALLCIC indicates no half E1/T1 timeslots on the A interface ADD must be set with the start CIC. AE1T1(Manda Value ALLNULL indicates that all tory) E1/T1 ALLCIC indicates that all Value timeslots on the A interface E1/T1 timeslots on the PB interface ADD must be set with the start CIC. PBE1T1(Optio Value ALLNULL indicates that all nal) E1/T1 timeslots on the PB interface If the feed current of the TMA on SET tributary 0 is smaller than the value BTSDATUBP( of this parameter, the TMA Low Optional) Temperature alarm is triggered. ALIVETIMER Alive Timer BSC6900 AllBw Bandwidth Resource Reallocation to Different Trx BSC6900 ALLOCDIFFTRX BSC6900 Allocate One ALLOCSINGLEPDC PDCH for HFORSIGNALLING Signaling Data BSC6900 ALLOWAMRHALFR ATEUSERPERC Ratio of AMR-HR BSC6900 ALLOWEDADAMUL Allow EDA TIPLEX Multiplex BSC6900 Allowed Measure ALLOWEDMEASRP Report Missed TMISSEDNUM Number BSC6900 ALLOWHALFRATE USERPERC Ratio of TCHH BSC6900 ALLTSTYPE Timeslot Type BSC6900 ALLTSTYPE Timeslot Type Feed Tri. 0 TMA Low Current Alarm Threhold BSC6900 ALMD0 BSC6900 ALMD1 Feed Tri. 1 TMA Low Current Alarm Threhold Feed Tri. 2 TMA Low Current Alarm Threhold Feed Tri. 3 TMA Low Current Alarm Threhold Feed Tri. 4 TMA Low Current Alarm Threhold Feed Tri. 5 TMA Low Current Alarm Threhold BSC6900 ALMD2 BSC6900 ALMD3 BSC6900 ALMD4 BSC6900 ALMD5 BSC6900 ALMDISACDUR Alarm Disappear Accumulate Duration BSC6900 ALMENABLE Alarm Enable Flag BSC6900 AlmId Alarm ID. BSC6900 ALMID Alarm ID. BSC6900 ALMLMTDOWN Lower Alarm BSC6900 ALMLMTUP1 Upper Alarm BSC6900 ALMLMTUP2 Upper Alarm BSC6900 If the feed current of the TMA on SET tributary 1 is smaller than the value BTSDATUBP( of this parameter, the TMA Low Optional) Temperature alarm is triggered. If the feed current of the TMA on SET tributary 2 is smaller than the value BTSDATUBP( of this parameter, the TMA Low Optional) Temperature alarm is triggered. If the feed current of the TMA on SET tributary 3 is smaller than the value BTSDATUBP( of this parameter, the TMA Low Optional) Temperature alarm is triggered. If the feed current of the TMA on SET tributary 4 is smaller than the value BTSDATUBP( of this parameter, the TMA Low Optional) Temperature alarm is triggered. If the feed current of the TMA on SET tributary 5 is smaller than the value BTSDATUBP( of this parameter, the TMA Low Optional) Temperature alarm is triggered. Alarm clearance accumulated ADD failure duration.Threshold for the BTSALMMGM accumulated duration in which the RULE(Mandat alarm persists. If the accumulated ory) duration exceeds this threshold, an SET Whether the configuration of alarm BTSAPMUBP( parameters is allowed. Optional) In multi-mode scenario, the value SET of this parameter must be the BTSDPMUBP( same as the value of the parameter SET BTSALMFLAS HTHD(Mandat ory) ID of the intermittent alarm. ADD BTSALMMGM RULE(Mandat ory) Alarm ID If the input current of the antenna SET feeder is smaller than the value of BTSDGPSBP( this parameter, an alarm related to Optional) the GPS antenna is reported. If the input current of the antenna feeder is greater than the value of SET this parameter and "GPS or RGPS" BTSDGPSBP( is set to "GPS", an alarm related to Optional) the GPS antenna is reported. If the input current of the antenna feeder is greater than the value of SET this parameter and "GPS or RGPS" BTSDGPSBP( is set to "RGPS", an alarm related Optional) to the RGPS antenna is reported. ALMOCACDUR Alarm Occurrence Accumulate Duration BSC6900 Alarm Occur AlmOccurAccuTime Accumulative HThd Time Threshold Alarm Clear AlmOccurAccuTime Accumulative LThd Time Threshold BSC6900 BSC6900 AlmOccurTimesHTh Alarm Occur d Times Threshold BSC6900 AlmOccurTimesLTh Alarm Clear d Times Threshold BSC6900 Alarm Parameter Configuration Enabled BSC6900 ALMPARACFGFLA G ALMTP Alarm Type BSC6900 ALPHA ALPHA BSC6900 Accumulated alarm occurrence duration.Threshold for the accumulated duration in which the alarm persists. If the accumulated duration exceeds this threshold, an Alarm Occur Accumulative Time refers to the percentage of the alarm occurrence accumulative time to "Flash Statis Alarm Raise Time Window". If the alarm Alarm Clear Accumulative Time refers to the percentage of the alarm clearance accumulative time to "Flash Statis Alarm Clear Time Window". If the alarm clearance If the number of alarm flashes exceeds the value of this parameter within the time specified by "Flash Statis Alarm Raise Time Window", the BTS Statistical Alarm If the number of alarm flashes is smaller than the value of this parameter within the time specified by "Flash Statis Alarm Clear Time Window",the configuration of alarm Whether the BTS Statistical Alarm parameters is allowed. The value SET "YES" indicates that the BTSDHEUBP( configuration is allowed, and the Optional) value "NO" indicates that the EXP ALMLOG(Opti onal) STA Type of the alarm. The alarm can ALMLOG(Opti be aused to perform open loop It is fault alarm or an event alarm. SET power control. Alpha parameter is GCELLPSPW used by the MS to calculate the PARA(Optiona output power PCH of the uplink l) PDCH. This parameter is used to ADD BTSALMMGM RULE(Mandat ory) SET BTSALMFLAS HTHD(Option al) SET BTSALMFLAS HTHD(Option al) SET BTSALMFLAS HTHD(Option al) SET BTSALMFLAS HTHD(Option al) SET GCELLLCS(O Decimal part of the antenna ptional) altitude ADD GPS(Mandato Height of the specified GSP ry) receiver antenna SET GCELLLCS(O ptional) Integer part of the antenna altitude ADD GPS(Mandato Height of the specified GSP ry) receiver antenna ALTIDECI Antenna Altitude Decimal Part BSC6900 ALTITUDE GPS antenna altitude BSC6900 ALTITUDE Antenna Altitude Int Part BSC6900 ALTITUDEIMP GPS antenna altitude BSC6900 ALVL Alarm Severity BSC6900 ALVL Alarm Severity BSC6900 EXP ALMLOG(Opti onal) SET ALMLVL(Man datory) SET ALMSCRN(M Alarm severity. One or more severities can be selected. By default, all severities are selected. Alarm severity. One or more severities can be selected. By default, all severities are selected. AMPC0 Feed Tri. 0 TMA Configuration BSC6900 SET BTSDATUBP( Whether to supply power to the Optional) TMA on tributary 0 SET BTSDATUBP( Whether to supply power to the Optional) TMA on tributary 1 SET BTSDATUBP( Whether to supply power to the Optional) TMA on tributary 2 SET BTSDATUBP( Whether to supply power to the Optional) TMA on tributary 3 SET BTSDATUBP( Whether to supply power to the Optional) TMA on tributary 4 SET BTSDATUBP( Whether to supply power to the Optional) TMA on tributary 5 SET Maximum degree by which the GCELLPWR2( BSC can control the power of the Optional) AMR BTS dynamically Whether to enable the III power SET control algorithm for AMR calls. If GCELLPWR3( enabled, power control is Optional) performed on AMRthe adaptive Whether to enable calls. adjustment function of AMR SET downlink threshold. After this GCELLCCAM function is enabled, the BTS R(Optional) estimates the long-term voice Number of measurement reports sampled for averaging downlink SET AMR signal strength. A single GCELLPWR2( measurement report may not Optional) reflect the actual network situations AMPC1 Feed Tri. 1 TMA Configuration BSC6900 AMPC2 Feed Tri. 2 TMA Configuration BSC6900 AMPC3 Feed Tri. 3 TMA Configuration BSC6900 AMPC4 Feed Tri. 4 TMA Configuration BSC6900 AMPC5 Feed Tri. 5 TMA Configuration BSC6900 AMR BTS PC AMRBTSPWRNUM Class BSC6900 AMRCALLPCALLO WED AMRDADTHAW Allow III Power Control For AMR BSC6900 AMR Downlink Adaptive Threshold Allowed BSC6900 AMR Filter Length for DL RX_LEV AMRDLLEVFTLEN BSC6900 AMR DL MR. Number AMRDLPREDLEND Predicted BSC6900 SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) AMRDLQHTHRED AMR DL Qual. Upper Threshold BSC6900 AMRDLQLTHRED AMR DL Qual. Lower Threshold BSC6900 AMR Filter Length for DL AMRDLQUAFTLEN Qual. AMR DL Qual AMRDLQUALBADT Bad Trig RIG Threshold BSC6900 BSC6900 AMRDLQUALBADU AMR DL Qual PLEV Bad UpLEVDiff BSC6900 AMR DL RX_LEV AMRDLSSHTHRED Upper Threshold BSC6900 AMR DL RX_LEV AMRDLSSLTHRED Lower Threshold BSC6900 Number of downlink AMR measurement reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a powerlevel threshold for Thus, Quality control command. decreasing downlink AMR signal power. If the BTS transmits AMR signals at a quality level less than "AMR DL Qual. Upper for Quality level threshold Threshold", increasing downlink AMR signal power. If the BTS transmits AMR signals at a quality level greater than "AMR measurement reports Number of DL Qual. Lower sampled for averaging downlink AMR signal quality. A single measurement report may not reflect the actual power control, if During downlink network situations the downlink receive quality level is equal to or greater than this threshold, "AMR DL RX_LEV Upper Threshold" is increased by During downlink power control, if the downlink receive quality level is equal to or greater than "AMR DL Qual Bad Trig Threshold", "AMR DL RX_LEV Upper Threshold" is Upper threshold for downlink AMR signal strength. If the downlink received AMR signal level is greater than this threshold, a power decrease is Lower threshold for downlink AMR signal strength. If the downlink received AMR signal level is less than this threshold, a power increase is AMRFULLTOHALFH AMR F-H Ho OALLOW Allowed AMR F-H Ho AMRFULLTOHALFH ATCB Adjust OATCBADJSTEP Step BSC6900 BSC6900 AMRFULLTOHALFH AMR F-H Ho OATCBTHRESH ATCB Threshold BSC6900 AMR F-H Ho AMRFULLTOHALFH Pathloss Adjust OPATHADJSTEP Step BSC6900 SET Whether to enable the algorithm for GCELLHOBA the load-based AMR handover SIC(Optional) between full rate and half rate With "F-H Ho Period" and the duration for triggering handover SET from full rate to half rate, this GCELLHOBA parameter determines the current SIC(Optional) ATCB offset by which toAMR threshold for the choose handover from full rate to half rate. SET If the ATCB of an AMR full rate call GCELLHOBA is equal to or greater than this SIC(Optional) threshold, Ho Period" and handed With "F-H the AMR call is the duration for triggering handover SET from full rate to half rate, this GCELLHOBA parameter determines the current SIC(Optional) path loss offset by which to choose AMR F-H Ho AMRFULLTOHALFH Pathloss OPATHTHRESH Threshold BSC6900 SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) AMRFULLTOHALFH AMR F-H Ho OQUALTHRESH Qual. Threshold BSC6900 AMRFULLTOHALFH AMR F-H Traffic OTHRESH Threshold BSC6900 AMRHALFTOFULLH AMR H-F Ho OATCBTHRESH ATCB Threshold BSC6900 AMR H-F Ho AMRHALFTOFULLH Pathloss OPATHTHRESH Threshold BSC6900 AMRHALFTOFULLH Allow AMR H-F OQUALALLOW Quality-based HO BSC6900 AMRHALFTOFULLH AMR H-F Ho OQUALTHRESH Qual. Threshold BSC6900 AMRHALFTOFULLH AMR H-F Traffic OTHRESH Threshold BSC6900 Path loss threshold for the AMR handover from full rate to half rate. If the path loss of an AMR full rate call is equal to or less than this threshold, the AMR call is handed Quality threshold for the AMR handover from full rate to half rate. If the uplink and downlink receive quality levels of an AMR full rate call are equal tofor the AMR this Load threshold or less than handover from full rate to half rate. If the cell load is greater than this threshold, the AMR full rate calls are handed over for half AMR ATCB threshold to the rate. handover from half rate to full rate. If the ATCB of an AMR half rate call is less than this threshold, the AMR loss is handed for the AMR Path call threshold over from half handover from half rate to full rate. If the path loss of an AMR half rate call is greater than this threshold, the AMR call is handed over from Whether to enable the algorithm for the uplink and downlink receive quality based AMR handover from half rate to full rate the AMR Quality threshold for handover from half rate to full rate. If the receive quality level of an AMR half rate call is greater than this threshold, the AMR call is Load threshold for the AMR handover from half rate to full rate. If the cell load is less than this threshold, the AMR half rate calls are handed over to full rate. AMR MAX Up AMRMAXADJPCVA Adj. PC Value by L Qual. BSC6900 AMR MAX Down Adj. Value Qual. Zone 0 BSC6900 AMR MAX Down Adj. Value Qual. Zone 1 BSC6900 AMR MAX Down Adj. Value Qual. Zone 2 BSC6900 AMRMAXSTEP0 AMRMAXSTEP1 AMRMAXSTEP2 SET Maximum step by which the power GCELLPWR2( can be increased according to Optional) received signal by which the power Maximum step quality can be decreased when the SET received signal quality belongs to GCELLPWR2( quality zone 0. Optional) Huawei power control algorithm Maximum step by which the power can be decreased when the SET received signal quality belongs to GCELLPWR2( quality zone 1. Optional) Huawei power control algorithm Maximum step by which the power can be decreased when the SET received signal quality belongs to GCELLPWR2( quality zone 2. Optional) Huawei power control algorithm AMR MAX Up AMRMAXVALADJR Adj. PC Value by X RX_LEV BSC6900 AMR MR. Compensation AMRMRCOMPREG Allowed BSC6900 SET Maximum step by which the power GCELLPWR2( can be increased according to Optional) received signal level Whether to enable the compensation of AMR SET measurement reports in Huawei GCELLPWR2( power control algorithm generation Optional) II SET Minimum interval between two GCELLPWR2( consecutive AMR power control Optional) commands SET GCELLPWR2( Optional) SET GCELLPWRB ASIC(Optional ) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCCAM R(Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) Maximum step by which the power can be decreased according to received of levels by which the BTS Number signal quality increases the power of an SACCH frame. This parameter is used for SACCH power control. When sending an SACCHthe BSCthe BTS Whether to enable frame, to assign AMR half rate channels preferentially according to the channel types allowed by the MSC and the current for assigning ratio Load threshold TCH seizure half rate channels preferentially. If the current TCH seizure ratio of the cell is greater than this threshold, AMR half rate channels are assigned Whether to enable the adaptive adjustment function of AMR uplink threshold. After this function is enabled, the BTS estimates the long-term voice quality (indicated Number of measurement reports sampled for averaging uplink AMR signal strength. A single measurement report may not reflect the actual network situations Number of uplink AMR measurement reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a powerlevel threshold for Thus, Quality control command. decreasing the power of an uplink AMR call. If the MS transmits AMR signals at a quality level less than "AMR ULQual. Upper Threshold", Quality level threshold for increasing the power of an uplink AMR call. If the MS transmits AMR signals at a quality level greater than "AMR UL Qual. Lower AMRPCADJPERIOD AMR PC Interval BSC6900 AMR MAX Down Adj. PC Value by Qual. BSC6900 AMRQUALSTEP AMR SACCH AMRSADLUPGRAD Downlink Power E Upgrade BSC6900 AMRTCHHPRIORAL AMR TCH/H LOW Prior Allowed AMR TCH/H Prior Cell Load Threshold AMR Uplink Adaptive Threshold Allowed AMR Filter Length for UL RX_LEV BSC6900 AMRTCHHPRIORL OAD BSC6900 AMRUADTHAW BSC6900 AMRULLEVFTLEN BSC6900 AMR UL MR. Number AMRULPREDLEND Predicted BSC6900 AMRULQHTHRED AMR UL Qual. Upper Threshold BSC6900 AMRULQLOWTHRE AMR UL Qual. D Lower Threshold BSC6900 AMR Filter Length for UL AMRULQUAFTLEN Qual AMR UL Qual. AMRULQUALBADT Bad Trig RIG Threshold BSC6900 SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET OTHSOFTPA RA(Optional) SET AITFOTHPAR A(Optional) SET TCPARA(Opti onal) BSC6900 AMRULQUALBADU AMR UL Qual. PLEV Bad UpLEVDiff BSC6900 AMR UL RX_LEV AMRULSSHTHRED Upper Threshold BSC6900 AMR UL RX_LEV AMRULSSLTHRED Lower Threshold BSC6900 MAX Retrans Reset Circle Msg on A-I BSC6900 MAX Reset Mesg Retransmission on A-I BSC6900 AN19 AN4 ANC_Max_Gain ANC Max Gain BSC6900 Number of measurement reports sampled for averaging uplink AMR signal quality. A single measurement report may not reflect the actual network situations During uplink power control, if the uplink receive quality level is equal to or greater than this threshold, "AMR UL RX_LEV Upper Threshold" is increased by "AMR During uplink power control, if the uplink receive quality level is equal to or greater than "AMR UL Qual. Bad Trig Threshold", "AMR UL RX_LEV Upper Threshold"AMR Upper threshold for uplink is signal strength If the uplink received AMR signal level is greater than this threshold, a power decrease isuplink AMR Lower threshold for computed. signal strength. If the uplink received AMR signal level is less than this threshold, a power increase is computed. Then, Maximum number of retransmissions of the A-interface circuit reset message. When an Ainterface circuit of the BSC is reset, the BSC sends theof times of Maximum number reset message resending a reset message at the A interface. When the BSC6900 is reset, the BSC6900 sends a reset message to theto the signals from Maximum gain MSC and starts a the remote end. If the parameter is set to a small value, the target SNR may be restrained when the signal arrives at the local end. ANC_Switch ANC Switch BSC6900 ANC_Target_SNR ANC Target SNR BSC6900 ANGLE RET Antenna Tilt Angle BSC6900 ANI Adjacent Node ID BSC6900 SET TCPARA(Opti Whether to enable the adaptive onal) noise cancel (ANC) function The system adjusts the remote SET input so that the ratio of the remote TCPARA(Opti signal to the local noise is above onal) the value of this parameter. SET BTSANTANG LE(Mandatory ) Tilt angle of the RET antenna ADD ADJNODE(Ma ndatory) ADD Uniquely identifies an adjacent IPPATH(Mand node ANI Adjacent node ID BSC6900 ADD IPMUX(Manda tory) ADD Adjacent node identifier of this IP IPPATHBIND( path SET ENVALMPAR A(Optional) New name of the alarm SET TCPARA(Opti onal) ANR parameter determines the This mode noise depression degree. A large SET absolute value of this parameter TCPARA(Opti corresponds to a strong onal) depression. SET TCPARA(Opti onal) ANR target noise level SET TCPARA(Opti Whether to enable the adaptive onal) noise restrain (ANR) function SET GCELLLCS(O ptional) SET BTSDGPSBP( Optional) SET BTSUSCUBP( SET BTSDGPSBP( Optional) SET BTSUSCUBP( ANM Alarm Name BSC6900 ANR_Mode ANR Mode BSC6900 ANR_Noise_Reducti ANR Noise on_Level Reduction Level BSC6900 ANR_Noise_Target_ ANR Noise Level Target Level BSC6900 ANR_Switch ANR Switch BSC6900 ANTAANGLE Antenna Azimuth Angle BSC6900 ANTENNALONG GPS Antenna Delay BSC6900 Size of the azimuth angle of the cell antenna the feeder cable. The Length of GPS satellite card is connected to the antenna through feeder cables. The transmission delay on the feeder cable can be calculated on ANTENNAPOWERS Antenna Power WITCH Supply Switch BSC6900 Power supply switch of the GPS antenna feeder ANTIERRFLAG E1T1 anti-error switch BSC6900 ADD MPGRP(Optio nal) E1T1 anti-error switch. SET BTSTHEFTAL Whether to enable the BTS to clear M(Optional) the burglar alarm automatically LOD RETANTCFG( Mandatory) SET BTSANTANG Number of the antenna AntiTheftAllow Burglar Alarm Auto Clear Permit BSC6900 ANTNO Antenna No. BSC6900 ANTPASSNO Antenna Pass No BSC6900 Sub-Location Group Antenna Pass No. ANTPASSNO BSC6900 AORB Down TRX1 A or B BSC6900 ADD TRXBIND2PH YBRD(Mandat Number of the antenna feeder ory) channel mapped to the RXU of a Antenna pass No. of the RXU sub-location group. The parameter ADD is configured only when the MRRU BTSBINDLOC or GRRU is used in the subGRP(Optional) location group. ADD BTSANTFEE DERBRD(Man datory) Antenna pass number of the SET downlink tributary ADD MTP3LNK(Ma Number of a port on the A interface ndatory) board layer application type of the Upper SCTP link. The upper layer ADD application type of A and LB SCTPLNK(Ma interface is M3UA. In the BSC ndatory) disaster tolerance, the application ADD SEMILINK(Ma ndatory) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) APN A interface port No. BSC6900 APP Application type BSC6900 APPTYPE Application Type BSC6900 AqmM AQM N Update Interval BSC6900 AqmMaxTh AQM Maximum Threshold BSC6900 AqmMinTh AQM Congestion Threshold BSC6900 AQM Packet Discard Initial Interval AqmNinit BSC6900 AqmNLowerBound AQM Packet Discard Interval Lower Threshold BSC6900 AQM Packet Discard Interval Upper Threshold BSC6900 AqmNUpBound Application type of the semipermanent link Update frequency of the value N (packet drop interval), indicating that the packet drop interval is updated after N packets are transmitted. threshold of the TBF Upper length buffer queue. If the length of the TBF buffer queue exceeds this threshold, whether the packets are discarded isthreshold of the TBF Congestion determined according buffer queue. If the congestion level in the TBF buffer queue exceeds this threshold, whether the packets are of the interval Initial value discarded actively is (indicated by N) at which the packets in the TBF buffer queue are discarded. The value N indicates the frequency of Lower threshold of the interval for discarding the packets in the TBF buffer queue, that is, the minimum value of N (packet drop interval). Upper threshold of the interval for discarding the packets in the TBF buffer queue, that is, the maximum value of N (packet drop interval). AqmSwitch AQM Switch BSC6900 AqmTarTh AQM Target Threshold BSC6900 SET BSCPSSOFT PARA(Optiona l) AQM switch SET BSCPSSOFT PARA(Optiona Target threshold of the TBF buffer l) queue SET BSCBASIC(O ptional) CMP BRDAREA(Op tional) LOD PATCH(Optio LOD BRD(Optional) SYN BRDAREA(Op tional) SET GTRXRLALM( Optional) SET GTRXRLALM( Optional) SET GTRXRLALM( Optional) STR IPCHK(Option al) AreaCode Area Code BSC6900 Local area code, for example, 021 for Shanghai AREAFLAG Area flag BSC6900 Area flag AREAFLAG Area flag Abnormal Release Threshold BSC6900 AREDISTHD BSC6900 ARELBASE Abnormal Release Statistic Base BSC6900 ARELWTHD Abnormal Warn Threshold BSC6900 ARPRETRY ARP packet resend times BSC6900 Area flag for reporting the Threshold recovery alarm for the abnormal release alarm. If the percentage of the abnormal channel releases is equal to or less than this threshold, Release statistics base for subchannels. This parameter indicates the number of times that a subchannel is activated. In a timeslot, the release statistics Threshold for reporting the abnormal release alarm. In a timeslot, the release statistics base, B, multiplied by the number of channels, N, is the channel Retransmission times upon ARP timeout. When the ARP request times exceeds the retransmission time without a response, the ARP/BFD detection failure alarm is ARPTIMEOUT ARP packet timeout[100ms] BSC6900 STR IPCHK(Option al) ARP packet timeout time ADD MTP3LNK(Ma ndatory) ADD ATERSL(Opti onal) ADD ATERCONSL( ASN A interface slot No. BSC6900 Number of the slot where the A interface board is located ASN A interface slot No. BSC6900 Number of the slot where the A interface board is located ASRN A interface subrack No. BSC6900 ASS Event Type BSC6900 ADD MTP3LNK(Ma ndatory) EXP ALMLOG(Opti onal) STA ALMLOG(Opti Number of the subrack where the A interface board is located Network management type of the alarm. By default, all network management types are selected. ASS Event Type BSC6900 SET Network management type of the ENVALMPAR alarm. By default, all network A(Optional) management types are selected. SET Switch for assigning the channel of GCELLHOAD( a better cell to the MS during MS Optional) access. parameter is set to When this ENABLE, if the cell supports direct SET retry and the current cell load is GCELLCCBA equal to or larger than the value of SIC(Optional) "Cell direct retry forbidden SET GCELLCHMG AD(Optional) SET BTSAPMUBP( Optional) SET BTSDEMUBP( Offset relative to the level threshold for determining whether to assign a channel in the overlaid where the Number of the cabinet subcell associated RXU board is installed. This parameter is valid for DRRU, MRRU, GRRU, or BTS3900E board in of the cabinet where the Number the remote monitoring associated RXU board is installed. SET This parameter is valid for DRRU, BTSRXUBP(M MRRU, GRRU, or BTS3900E andatory) board in the remote monitoring SET BTSAPMUBP( Optional) SET Number of the slot where the BTSDEMUBP( associated RXU board is installed. SET BTSRXUBP(M andatory) SET BTSAPMUBP( Optional) SET BTSDEMUBP( AssignBetterCellEn Assigning Better Cell Allowed Assignment Cell Load Judge Enable BSC6900 ASSLOADJUDGEE N BSC6900 Assign to ASSOLRXLEVOFFS Overlayer RxLev ET Offset BSC6900 ASSORXUCN Associated RXU Board CN BSC6900 ASSORXUCN Associated RXU Board CN BSC6900 ASSORXUSN Associated RXU Board SN BSC6900 ASSORXUSN Associated RXU Board SN BSC6900 Number of the slot where the associated RXU board is installed. ASSORXUSRN Associated RXU Board SRN BSC6900 Number of the subrack where the associated RXU board is installed. ASSORXUSRN Associated RXU Board SRN BSC6900 SET BTSRXUBP(M Number of the subrack where the andatory) associated RXU board is installed. ASSThres Absolute Signal Strength Threshold BSC6900 SET OTHSOFTPA RA(Optional) SET GCELLTMR( Optional) SET BSCTMR(Opti onal) SET BSCAITFTMR (Optional) SET BSCAITFTMR (Optional) SET BSCAITFTMR (Optional) SET BSCTMR(Opti onal) SET BSCTMR(Opti onal) ASSTIMER T3107 BSC6900 AT1 T1 BSC6900 AT13 T13 -s BSC6900 AT17 T17 -s BSC6900 AT18 T18 -s BSC6900 AT19 T19 BSC6900 AT20 T20 BSC6900 Absolute level threshold for automatic optimization of neighbor cells and frequencies. The measurement results in measurement reports are screened After the BSC6900 delivers an assignment command, the T3107 timer starts. If the BSC6900 receives an assignment complete message waiting forscheduled Timer for within the a single Ainterface circuit blocking or unblocking answer. The BSC6900 starts this T1 timer after sending a single timer, that is, MSC reset protection A-interface interval between the time when the BSC6900 receives an MSC reset message and the time when the BSC6900 answerreceiving an MSC T17 timer. When to the MSC. overload message or a single point congestion message for the first time, the BSC6900 increases the leveltimer. When receiving an MSC T18 of the A interface flow control overload message or a single point congestion message for the first time, the BSC6900 increases the level of the A interface flow control Timer for waiting for an A-interface circuit reset answer. The BSC6900 starts this timer after sending an A-interface circuit reset message.waiting thisan A-interface Timer for When for timer expires circuit group blocking or unblocking answer. After sending a CIC group blocking/unblocking message over the A interface, the BSC6900 starts AT4 T4 -s BSC6900 ATCBHOEN ATCBHYST ATCBTHRED Concentric Circles ATCB HO Allowed BSC6900 Distance Hysteresis Between Boundaries BSC6900 Distance Between Boundaries of Subcells BSC6900 SET BSCAITFTMR Timer for waiting for an A-interface (Optional) reset answer Whether to enable the ATCB handover algorithm for the SET concentric cell. According to the GCELLHOBA neighbor cell signal, the ATCB SIC(Optional) handover algorithm determines the Hysteresis in the distance between SET the boundary of the overlaid subcell GCELLHOED and the boundary of the underlaid BPARA(Optio subcell. This parameter helps to nal) adjust "Distance Between Distance between the boundary of SET the overlaid subcell and the GCELLHOED boundary of the underlaid subcell. BPARA(Optio This parameter specifies the nal) difference between the coverage of Ater8KSw Switch of 8K on Ater BSC6900 AterCongHRFlag HR Allocation Flag BSC6900 AterCongstRatio Congestion Ratio on Ater Resource BSC6900 ATERIDX Ater connection path index BSC6900 AterJamThreshold2S Ater Jam Rate for tartLs BSC Local Switch BSC6900 ATERMASK Ater Mask BSC6900 ATEROMLFLAG Whether or not for OML BSC6900 SET Whether to enable the BSC to use OTHSOFTPA a 8 kbit/s timeslot to transmit 8 RA(Optional) kbit/s data at the Ater interface Whether to enable the BSC to SET assign half rate channels OTHSOFTPA preferentially when the Ater RA(Optional) interface isthat determines whether Threshold congested the Ater interface is congested. SET The BSC determines whether to OTHSOFTPA assign full or half rate channels RA(Optional) preferentially according to the ADD MTP3LNK(Ma ndatory) ADD ATERE1T1(M Index of an Ater connection path Threshold for enabling the BSC local switching. When the SET congestion rate at the Ater BSSLS(Option interface exceeds this threshold, al) the function is enabled. ADD MTP3LNK(Ma ndatory) ADD ATERSL(Man Ater interface timeslotthe Ater OML Whether to configure mask link used for the TC subrack for the ADD port. If it is actually configured and SEMILINK(Ma you specify that it is not configured, ndatory) the TC subrack fails to start. If it is ADD ATEROML(Ma ndatory) Ater maintenance link index ADD ATEROML(Ma ndatory) ADD ATERSL(Opti onal) ADD ATERCONSL( Ater connection path index,The index is set through the ADD ATERCONPATH command. ATEROMLINX Ater OML Index BSC6900 ATERPIDX Ater Connection Path Index BSC6900 ATERSLID Ater Signaling Channel ID BSC6900 Indentifies an Ater signaling channel Ater Interface ATERTRANSMODE Transfer Mode BSC6900 SET Transport mode of the Ater BSCBASIC(M interface. The Ater interface can andatory) be in TDM or in IP transport mode. STR Number of the RF port on the RF BTSVSWRTS front-end board of the BTS. The T(Optional) number is unique in a board. ATN Antenna Tributary No. BSC6900 ATSMASK A interface timeslot mask BSC6900 ATT Attach-detach Allowed BSC6900 ADD MTP3LNK(Ma ndatory) SET GCELLIDLEB ASIC(Optional ) A interface timeslot mask Attach-detach Allowed (ATT). If this parameter is set to YES, when an MS is powered off, the network does not process any call connection for the MS as a called ATTENFACTOR1 Antenna Tributary 1 Factor BSC6900 SET BTSRXUBP(O TMA attenuation factor of antenna ptional) tributary 1 SET BTSRXUBP(O TMA attenuation factor of antenna ptional) tributary 2 SET E1T1LOP(Opti onal) It specifies the loopback duration. STR E1T1TST(Opti onal) It specifies the test duration. SET SSLAUTHMO DE(Mandatory SSL authentication mode of the ) peer certificate ADD PPPLNK(Man Validation mode of the PPP or MP datory) link negotiation ADD MPGRP(Mand atory) ADD BTSPPPLNK( Mandatory) ADD BTSMPGRP( ATTENFACTOR2 Antenna Tributary 2 Factor BSC6900 AUSTOP Loop time[min] BSC6900 AUSTOP Test time[min] BSC6900 AUTHMODE Authentication Mode BSC6900 AUTHMODE Validate mode BSC6900 AUTHMODE Validate mode BSC6900 Validation mode of the PPP or MP link negotiation The PPP or MP link is as server or client when it negotiates with peer link. AUTHMODE Validate Mode BSC6900 AUTHNAME Validate user name BSC6900 ADD PPPLNK(Man Username to validate, for the PPP datory) or MP link negotiation ADD MPGRP(Mand Username to validate, for the PPP atory) or MP link negotiation AUTHNAME Validate user name BSC6900 AUTHNAME Validate User Name BSC6900 ADD BTSPPPLNK( Mandatory) ADD Username to validate, for the PPP BTSMPGRP( or MLPPP link negotiation ADD PPPLNK(Man Password to validate, upon PPP or datory) MP link negotiation ADD MPGRP(Mand atory) ADD BTSPPPLNK( Mandatory) ADD BTSMPGRP( AUTHPWD Validate password BSC6900 AUTHPWD Validate password BSC6900 Password to validate, upon PPP or MP link negotiation AUTHPWD Validate Password BSC6900 Password to validate, upon PPP or MLPPP link negotiation AUTHTYPE Validate protocol type BSC6900 ADD PPPLNK(Opti Type of validation protocol for the onal) PPP or MP link negotiation ADD MPGRP(Optio nal) ADD BTSPPPLNK( Optional) ADD BTSMPGRP( AUTHTYPE Validate protocol type BSC6900 Type of validation protocol for the PPP or MP link negotiation AUTHTYPE Validate Protocol Type BSC6900 AUTO Auto negotiation BSC6900 Type of the validation protocol for the PPP or MLPPP link negotiation Whether the self-negotiation mode is adopted SET 1. When the FG2 board is used ETHPORT(Op and the port type is GE, the selftional) negotiation mode must be adopted. AUTOADDSRCON Add inter-subrack path automatically BSC6900 Auto Adjust UL AUTOADJULTHHYS TH and TF Hysteresis [F] Auto Adjust UL AUTOADJULTHHYS TH and TH Hysteresis [H] BSC6900 BSC6900 ADD Whether inter-subrack path can be BRD(Optional) added automatically Whether to allow automatic SET adjustment for the uplink threshold GCELLCCAM and hysteresis of full rate AMR call R(Optional) rates Whether to allow automatic SET adjustment for the uplink threshold GCELLCCAM and hysteresis of half rate AMR call R(Optional) rates SET OTHSOFTPA Whether to enable the BSC to RA(Optional) obtain BTS logs automatically AutoGetBtsLogFlag Support Auto Obtaining of BTS Logs BSC6900 AUTONEG Automatic Negotiation Mode BSC6900 Work Mode for Auto Download Activation AUTOTYPE BSC6900 SET BTSETHPOR T(Optional) SET BTSAUTODL DACTINFO(O ptional) Whether to enable the autonegotiation mode The parameter specifies the work mode for the automatic download and activation of the BTS software. BTS Software Auto DL and ACT indicates that the BTS boards are AUTOULKSW Auto Unlock Switch BSC6900 LCK SCHTSK(Opti onal) Auto unlock switch SET Duration of time after which the PWDPOLICY( locked user is unlocked Optional) automatically optical adaptation type between SET high-order path and multiplex OPT(Optional) section. for GSM protocols Phase tag supported by the A interface. The SET value of this parameter is chosen BSCBASIC(O according to the A interface phase ptional) tag provided by the MSC. SET ALMPORT(Op tional) SET BTSENVALM PORT(Option al) AutoUnlockTime Auto Unlock Time BSC6900 AUTYPE Administration unit type BSC6900 AVer A Interface Tag BSC6900 AVOL Alarm level BSC6900 Alarm level for a digital port AVOL Alarm VOL. B1B2 signal degraded threshold BSC6900 B1B2SDTHRD BSC6900 SET OPT(Optional) B1B2SFTHRD B1B2 signal fail threshold B3 signal degrade threshold BSC6900 SET OPT(Optional) B3SDTHRD BSC6900 SET OPT(Optional) B3SFTHRD B3 signal fail threshold BSC6900 SET OPT(Optional) Alarm level. It is valid for the digital port. Threshold of B1 and B2 signal degrade. This parameter specifies the generation threshold and the recovery threshold of the B1B2 signal degradation threshold in Threshold of B1 and B2 signal failure. This parameter specifies the generation threshold and the recovery threshold of the B1B2 signal failure B3 signal degrade. Threshold of threshold in SDH This parameter specifies the generation threshold and the recovery threshold of the B3 signal degradation threshold in SDH This Threshold of B3 signal failure. parameter specifies the generation threshold and the recovery threshold of the B3 signal failure threshold in SDH frames at the BACK8KCLKSW1 Switch of backplane LINE1 BSC6900 SET CLK(Optional) Switch of backplane LINE1 BACK8KCLKSW2 Switch of backplane LINE2 BSC6900 SET CLK(Optional) Switch of backplane LINE2 BKP LOGDB(Optio nal) Directory for saving the backup file BackupPath Backup Path BSC6900 BACKUPPATH Path of Backup File BSC6900 BKP DB(Optional) SET GCELLSOFT( Optional) SET BSCPSSOFT PARA(Optiona l) ADD BTSESN(Opti onal) Bad Quality BADQUALDISCTHR Disconnection ES Threshold BSC6900 bAdvEstDlTbf Support Advance Downlink TBF Establishment BSC6900 BTS Interface Board Bar Code 2 BAKDEVTAB BSC6900 Path (complete path) of the backup file. Quality threshold for determining that a call is disconnected because of poor quality. If the uplink quality or downlink quality in the measurement reports during the Whether the downlink TBF can be established in advance. Downlink TBF establishment in advance indicates that the downlink TBF is established of the interface board of Bar code 2 immediately after the the BTS. This parameter is the electronic serial number of the standby PTU board. An electronic serial number uniquely identifies an BAKIP Backup port IP address BSC6900 STR IPCHK(Option al) IP address of the backup port STR IPCHK(Option al) Mask of the backup port the This parameter specifies method of saving the BTS backup SET power. BTSBAKPWR When this parameter is set to (Mandatory) "Turn off TRX", specifies the This parameter the BSC backup power saving policy of the SET BTS. BTSBAKPWR When this parameter is set to (Optional) "Cover Priority", the BTS shuts SET Whether the cells at the 1900 GCELLSOFT( frequency support high frequency Optional) 1900 BAKMASK Backup port mask BSC6900 BAKPWRSAVMETH Backup Power OD Saving Method BSC6900 BAKPWRSAVPOLIC Backup Power Y Saving Policy High Band BANDINDICATOR19 Indicator of Cell 00 1900 BSC6900 BSC6900 High Band BANDINDICATOR85 Indicator of Cell 0 850 High Band BANDINDICATOR90 Indicator of Cell 0 900 BSC6900 SET Whether the cells at the 850 GCELLSOFT( frequency support high frequency Optional) 1900 SET GCELLSOFT( Optional) Whether the cells at the 900 frequency support high frequency 1900 Duration in which intra-cell handover is forbidden after the SET number of consecutive intra-cell GCELLHOAD( handovers reaches the maximum. Optional) Intra-cell handover can be SET BTSRACKBC( List of bar codes of all the cabinets Mandatory) in the BTS ADD The reference BTS must support AISSCFG(Ma the Um interface software ndatory) synchronization. Number of the temperature sensor corresponding to a battery group. SET You can choose sensor 1 BTSAPMUBP( (Battery1Temp) or sensor 2 Optional) (Battery2Temp). Number of the temperature sensor corresponding to a battery group. SET In multi-mode scenario, the value BTSDPMUBP( of this parameter in one mode Optional) must becapacity. as the value of Battery the same In multi-mode scenario, the value SET of this parameter in one mode BTSDPMUBP( must be the same as the value of Optional) the corresponding parameter in Whether the configuration of external battery is allowed. The SET value "YES" indicates that the BTSDPMUBP( external battery can be configured, Optional) and the value "NO" indicates that SET Allowed percentage of the battery BTSAPMUBP( discharging. After the AC power Optional) supply is cut and the power of the SET battery is discharged by the value BTSDPMUBP( of this parameter, the diesel engine Battery type. In multi-mode scenario, the value SET of this parameter in one mode BTSDPMUBP( must be the same as the value of Optional) the corresponding parameter in SET SCTPSRVPO Number of the BBAP service RT(Optional) listening port BSC6900 BANTIME Forbidden time after MAX Times BSC6900 BARCODLST Cabinet Bar Code List BSC6900 BASEBTSID Reference BTS Index BSC6900 Temperature BASETEMPERATU Basis for RE Compensation Temperature BASETEMPERATU Basis for RE Compensation BSC6900 BSC6900 BATTCAPACITY Battery Capacity BSC6900 Battery Configuration Enabled BATTENABLEDIN BSC6900 BATTERYDISCHAR Battery Discharge GEDEPTH Depth BSC6900 BATTTYPE Battery Type BSC6900 BBAPSRVPN BBAP service listening port No. BSC6900 BBDIF Up Down Balance Basic Difference BSC6900 SET GTRXRLALM( Optional) SET BTSAPMUBP( Optional) ADD GCELL(Option al) BC Battery Capcity BSC6900 BCC BCC BSC6900 BCC BCC BSC6900 BCC BCC BSC6900 ADD GEXT2GCEL L(Mandatory) ADD GCELLQUICK BTS color code. It uniquely SETUP(Optio identifies different BTSs that are nal) adjacent and use the same TRX. ADD GEXT2GCEL L(Mandatory) ADD GCELLQUICK SETUP(Mand atory) SET GCELLHOPQ UICKSETUP( Mandatory) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) SET BSCPSTCDS CPMAP(Optio nal) STR FRPORTLOO P(Mandatory) BLK BC(Mandatory Reference difference between uplink and downlink levels. This parameter works with "Up Down Balance Floating Range" to count uplink-downlink imbalances. Battery capacity. The battery capacity should be set according to the vendor specification. If it is improperly configured, the battery life may be shortened. (BCC) of a Base station color code cell, provided by the network planning department. It is used for differentiating the neighboring cells using station color code (BCC) of a Base the same BCCH frequency. cell, provided by the network planning department. It is used for differentiating the neighboring cells using the same BCCH frequency. BCCH BCCH FD BSC6900 BCCH frequency of the cell BCCHFREQ Main BCCH Frequency BSC6900 Frequency of the BCCH TRX BCCHTRXHP Frequency Hopping Mode of BCCH TRX BSC6900 BCCONGESTALMB BC Congestion OUND Alarm Threshold BSC6900 BC Congestion BCCONGESTRESA Restore Alarm LMBOUND Threshold BSC6900 Frequency hopping mode of the TRX that carries the BCCH BC Threshold for reporting the congestion alarm. When the BC congestion level exceeds the threshold, the BC congestion alarm is reported. clearing the BC Threshold for congestion alarm. When the BC congestion level is below the threshold, the BC congestion alarm is cleared. BCDSCP DSCP of BG[QoS] BSC6900 BCID BC Identifier BSC6900 DSCP corresponding to the background service Identifies one BC at the Gb interface board. The BCID's value range of PEUa board is 0~255 and that of POUc board is 0~511. BCLC Battery Current Limiting Coefficient BSC6900 SET BTSAPMUBP( Optional) SET BTSAPMUBP( Optional) SET BTSAPMUBP( Optional) SET GCELLPSCH M(Optional) SET GCELLPSCH M(Optional) SET GCELLPSCH M(Optional) ADD N7DPC(Mand atory) SET GBSCREDGR P(Optional) SET GCELLEGPR SPARA(Optio nal) SET GCELLCCUT RANSYS(Opti onal) SET GCELLHOUT RANFDD(Opti onal) SET BCV Boost-Charging Voltage Battery Configuration Enabled BSC6900 BE BSC6900 BEARP1PRIWEIGH BestEffort-ARP1 T Priority Weight BSC6900 BEARP2PRIWEIGH BestEffort-ARP2 T Priority Weight BSC6900 BEARP3PRIWEIGH BestEffort-ARP3 T Priority Weight BSC6900 BEARTYPE DSP bear type BSC6900 Current limit coefficient of the battery. The maximum charging current equals the value of "Battery Current Limiting Coefficient" multiplexed by "Battery Capacity". If Boost-Charging Voltage. See the vendor specification for the setting of this parameter. In multi-mode scenario, the value of this parameter in one mode Whether the configuration of external battery is allowed. In multi-mode scenario, the value of this parameter in one mode must be the same as the value of ARP1 priority in the BE service. ARP1 priority weight determines the number of the budget blocks and the block scheduling priority. ARP2 priority in the BE service. ARP2 priority weight determines the number of the budget blocks and the block scheduling priority. ARP3 priority in the BE service. ARP3 priority weight determines the number of the budget blocks and the block scheduling priority. DSP bearer type. MTP3: indicates that the lower layer bearer is the MTP3 used in ATM/TDM scenario; M3UA: indicates that the lower Time interval for sending a handshake message between BSC6900s Average period for sending the measurement report over the EGPRS channel Number of UTRAN TDD cells that should be included in measurement report This parameter specifies whether to allow 3G better cell handover algorithm. Interval for Sending BEATSENDINGDIS Heartbeat BSC6900 BEPPERIOD Bep Period BSC6900 BESTTDDCELLNU M Best TDD Cell Number BSC6900 BET3GHOEN Better 3G Cell HO Allowed BSC6900 Better Cell BETTERCELLHOEN Handover Enable BSC6900 SET GCELLHOBA Whether to enable the algorithm for SIC(Optional) the handover to a better cell BETTERCELLLAST Better Cell HO TIME Valid Time BSC6900 BETTERCELLSTAT Better Cell HO TIME Watch Time BSC6900 BFDDETECTCOUN Detect multiplier T of BFD packet BSC6900 BFDSN BFD Session No. BSC6900 Up Down Balance Floating Range BSC6900 Switchback Policy of Baseband FH Mutual Aid BSC6900 BFRANGE BHPREPOLICY BITOFFSET In Frame Bit Offset [1/8 bit] BSC6900 BackgroundBKGARP1PRIWEIG ARP1 Priority HT Weight BackgroundBKGARP2PRIWEIG ARP2 Priority HT Weight BackgroundBKGARP3PRIWEIG ARP3 Priority HT Weight BSC6900 BSC6900 BSC6900 According to the P/N rule, if the conditions for the handover to a ADD better cell due to interference are G2GNCELL(O met for P seconds within N ptional) seconds, the the P/N rule,triggered. According to handover is if the conditions for the handover to a ADD better cell due to interference are G2GNCELL(O met for P seconds within N ptional) seconds, the handover is triggered. Timeout times of the BFD packet. If STR several consecutive BFD packets IPCHK(Option are not received, the BFD session al) is set to the DOWN state. ADD BTSBFD(Man datory) ADD BTSIPRTBIN BFD Session No. of the Allowed fluctuation difference between uplink and SET downlink levels relative to the GTRXRLALM( reference difference. If the Optional) difference between uplink and of Mutual-aid changeback policy SET baseband frequency hopping (FH). GCELLCCAC If multiple TRXs in a baseband FH CESS(Optiona group are faulty and changeback is l) needed after mutual aid of the SET BTSEXCURSI ON(Mandatory ) Bit offset in the frame of the BTS SET clock priority in the Background ARP1 service. ARP1 priority weight SET determines the number of the GCELLPSCH budget blocks and the block M(Optional) scheduling priority. Background ARP2 priority in the service. ARP2 priority weight SET determines the number of the GCELLPSCH budget blocks and the block M(Optional) scheduling priority. Background ARP3 priority in the service. ARP3 priority weight SET determines the number of the GCELLPSCH budget blocks and the block M(Optional) scheduling priority. SET ALMBLKSW( Optional) BLKFILTERSW Alarm switch of blinking filter BSC6900 BLKPRD Alarm blink threshold BSC6900 Base Station Controller alarm blink filter switch filter threshold. When Alarm blink the interval between the generation SET and clearance of an alarm is equal ALMBLKPAR to or smaller than the alarm blink A(Optional) filter threshold, the alarm is filtered BLKSTATPRD Observing time window of statistical alarm BSC6900 SET ALMBLKSW( Optional) SET ALMBLKSW( Optional) Measurement period of filtered Base Station Controller alarms Switch controlling whether to perform statistics of Base Station Controller alarms BLKSTATSW Switch of statistics blinking alarm BSC6900 BLOCKRETRY Block Retry BSC6900 SET Retry times after the peer response BSCNSPARA( timer expires during NSVC Optional) blocking SET BSCNSPARA( Optional) ADD ATERCONPA TH(Mandatory ) ADD ATERCONPA TH(Mandatory ) ADD ATERCONPA TH(Mandatory ) BLOCKTIMER Block Timer BSC6900 BMPN BM Port No BSC6900 BMSN BM Slot No BSC6900 Duration of the peer response timer during NSVC blocking Number of the port in the BM subrack where one end of the ATER connection channel is located Number of the slot in the BM subrack where one end of the ATER connection channel is located BMSRN BM Subrack No Timer Length of BM-TC Flow Control BSC6900 BMTCFCTimerLen BSC6900 BORROWDEVIP Borrow DevIP BSC6900 Number of the BM subrack where one end of the ATER connection channel is located Duration of the flow control SET protection timer enabled during the BSCTMR(Opti flow control between the TCS and onal) the MPS/EPS subracks ADD Whether to use the device IP PPPLNK(Man address as the local IP address. datory) When this parameter is set to ADD "YES", the device IP address is MPGRP(Mand used as the local IP address of the SET BOXRPT(Man datory) SET BTSBREAKP OINT(Optional ) SET BTSBREAKP OINT(Optional ) BOXFLG To Alarm Box Flag BSC6900 BP1 Position of Break Point 1 BSC6900 BP2 Position of Break Point 2 BSC6900 Whether to report the alarm to the alarm box break point 1 in an RXU Position of chain. The number of break points must not be greater than the number of RXU boards in the RXU chain. of break point 2 in an RXU Position chain. The number of break points must not be greater than the number of RXU boards in the RXU chain. BQHOEN BQ HO Allowed BSC6900 SET GCELLHOBA SIC(Optional) ADD G2GNCELL(O ptional) ADD G2GNCELL(O ptional) ADD G2GNCELL(O ptional) STR BKP(Mandator y) SET FCSW(Manda tory) SET FCCPUTHD( BQLASTTIME BQ HO Valid Time BSC6900 BQMARGIN BQ HO Margin BSC6900 BQSTATTIME BQ HO Watch Time BSC6900 Whether to enable the bad quality (BQ) handover algorithm. Whether to trigger BQ handover depends on the uplink and downlink transmit quality (measured by rule, ifBER). If According to the P/N using the conditions for emergency BQ handover are met in P of N measurement reports, the handover is triggered. neighbor If ("downlink level of the cell after filtering" - "downlink level of the serving cell (after power control compensation)") > ("Intercell HO Hysteresis" - rule, HO According to the P/N "BQ if the conditions for emergency BQ handover are met in P of N measurement reports, the handover is triggered. BRDCLASS Board Class BSC6900 Classes of boards classified according to function modules BRDCLASS Board Class BSC6900 Classes of boards classified according to function modules BRDCLASS Board Class BSC6900 ADD BRD(Mandato Classes of boards classified ry) according to function modules STR BTSLOG(Man datory) Number of the board STR BTSVSWRTS T(Optional) ADD BTSBRDCAP( Mandatory) ADD BTSRXUBRD( LOD BTSSW(Mand atory) ADD BTSBRDCAP( Mandatory) ADD BTSRXUBRD( BRDNO Board No. BSC6900 BRDNO Board No. BSC6900 BRDRXBW Receive Bandwidth BSC6900 Number of the RF front-end board in the BTS threshold of the total The upper receive bandwidth of all the TRXs bound to the board, for example, when this value is 250, it means the the total receive bandwidth BRDSWTYPE BTS Board Software Type BSC6900 BRDTXBW Forward Bandwidth BSC6900 Software type of the BTS board The upper threshold of the total send bandwidth of all the TRXs bound to send pass of board, for example, when this value is 150, it means the the total send bandwidth BRDTYPE Board Type BSC6900 SET DPUBRDTYP E(Mandatory) Type of the board BRDTYPE Board Type BSC6900 ADD BRD(Optional) Type of the board SET ETHPORT(Ma ndatory) Board type ADD PPPLNK(Man datory) Board type ADD MPGRP(Mand atory) Board type ADD MPLNK(Mand atory) Board type ADD BTSBRDCAP( Mandatory) Type of the new RXU board.can be board. The type TMU/DTMU, DTRU, DPTU, QTRU, STR MRRU, GRRU, BTS3900B, MRFU, BTSLOG(Man GRFU, BTS3900E, DRFU, DRRU, datory) UBRI or UTRP. To avoid intermittent blinking, the switchover cannot be performed SET over a certain period of time when BTSRINGATT the OML is disconnected. That R(Optional) period of time is specified as ring II SET GCELLSBC(O Contents of a cell broadcast ptional) message SET GCELLSBC(O Time interval for a cell broadcast ptional) message Backup mode of the log. If "ENTIRE" is selected, all logs in the BKP current database are backed up. If LOGDB(Optio "INCREMENTAL" is selected, the nal) logs generated after last backup BRDTYPE Board type. BSC6900 BRDTYPE Board type BSC6900 BRDTYPE Board type BSC6900 BRDTYPE Board type BSC6900 BrdType Board Type BSC6900 BRDTYPE Board Type BSC6900 BREAKTIME Ring II Wait Time Before Switch BSC6900 BROADCASTCONT Broadcast ENT Content BSC6900 BROADCASTINTER Broadcast VAL Interval BSC6900 BS Backup Style BSC6900 BSAGBLKSRES CCCH Blocks Reserved for AGCH BSC6900 BSCDPC External BSC DPC BSC6900 BS-AG-BLKS-RES, indicating the number of the CCCH message blocks reserved for the AGCH. After the CCCHs are configured, the value ofexternal BSC, which is DPC of the this parameter used for inter-BSC communication. ADD This parameter can be represented EXTBSC(Man in decimal, hexadecimal, and datory) binary. By default, this parameter is SET GCELLIDLEB ASIC(Optional ) SET BSCDSTPA(O ptional) BLK ACIC(Mandat ory) ADD AE1T1(Manda This parameter specifies whether to enable the TRX Intelligent Shutdown feature. Allow Dynamic BSCDynSwitchTrxP Shutdown Trx by AAllow BSC BSC6900 BSCFLAG BSC Flag BSC6900 BSCGATEWAYIP BSCGATHET BSCGATHST BSC GateWay IP BSC6900 BSC Offset Information Collection End Time BSC6900 BSC Offset Information Collection Start Time BSC6900 It indicates whether the A interface E1/T1 is the primary BSC6900 or secondary BSC6900.of the Gateway IP address BSC6900. When the BSC provides ADD the function of simple cell GCBSADDR( broadcast, the BSC6900 sends cell Mandatory) broadcast messages through this ADD AISSCFG(Opti End time for collecting the interonal) BSC offset information ADD AISSCFG(Opti Start time for collecting the interonal) BSC offset information ADD ADJNODE(Ma ndatory) ADD GEXT2GCEL L(Optional) ADD EXTBSC(Man BSCID BSC ID BSC6900 Uniquely identifies a BSC in the TC pool BSCIDX BSC Index BSC6900 ID of the BSC that controls the external 2G neighbor cell BSCINCHPRD BSC Fine Tuning Period BSC6900 BSCIP BSC IP BSC6900 BSCIP BSC IP BSC6900 ADD AISSCFG(Opti Period for fine tuning the BTS clock onal) between BSCs BSC6900. If the IP address of the connection mode of the BSC6900 ADD and the CBC is to lead cables out GCBSADDR( of the PIU, the value of this Mandatory) parameter must be the same as ADD BTSAUTOPL AN(Mandatory ) IP address of an interface board on SET the BSC6900 side BscLsStartMode Options for BSC Local Switch BSC6900 Conditions for enabling the function of BSC local switching. SET UNCONDITIONALSTART: The BSSLS(Option function of BSC local switching is al) enabled without restriction. ADD EXTBSC(Man datory) Unique name of the external BSC Whether to allow high-priority calls SET to preempt the radio resources of OTHSOFTPA low-priority calls when radio RA(Optional) resources are insufficient. Whether to allow the call during an SET intra-BSC handover to preempt the OTHSOFTPA radio resources of low-priority calls RA(Optional) in the target cell. ADD BTSMONITO RTS(Mandator In-BSC6900 port No. of the y) monitoring timeslot ADD Port number used for the GCBSADDR( communication between the Mandatory) BSC6900to allow the eMLPP Whether and the CBC priorities to be classified into two SET types: high priority and normal OTHSOFTPA priority. RA(Optional) If this parameter is set to NO, then SET Whether to allow calls to queue for OTHSOFTPA radio resources when radio RA(Optional) resources are insufficient. SET Whether to allow the service during OTHSOFTPA an intra-BSC handover to queue for RA(Optional) radio resources in the target cell. SET OTHSOFTPA Reserved parameter 1 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 10 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 11 that is RA(Optional) effective at the BSC level BSCNAME External BSC Name BSC6900 BSCPMA BSCPMAIRAHO Preemption Allowed Preemption Allowed During Intra-BSC Handover BSC6900 BSC6900 BSCPN In-BSC Port No. BSC6900 BSCPORT BSC Port Two eMLPP Priority Classes Allowed BSC6900 BSCPRICLASS BSC6900 BSCQAD Queue Allowed BSC6900 BSCQADIRAHO Queuing Allowed During Intra-BSC Handover BSC6900 BSCRESERVEDPA Reserved RA1 parameter 1 BSC6900 BSCRESERVEDPA Reserved RA10 parameter 10 BSC6900 BSCRESERVEDPA Reserved RA11 parameter 11 BSC6900 BSCRESERVEDPA Reserved RA12 parameter 12 BSC6900 SET OTHSOFTPA Reserved parameter 12 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 13 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 14 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 15 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 16 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 17 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 18 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 19 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 2 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 3 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 4 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 5 that is RA(Optional) effective at the BSC level BSCRESERVEDPA Reserved RA13 parameter 13 BSC6900 BSCRESERVEDPA Reserved RA14 parameter 14 BSC6900 BSCRESERVEDPA Reserved RA15 parameter 15 BSC6900 BSCRESERVEDPA Reserved RA16 parameter 16 BSC6900 BSCRESERVEDPA Reserved RA17 parameter 17 BSC6900 BSCRESERVEDPA Reserved RA18 parameter 18 BSC6900 BSCRESERVEDPA Reserved RA19 parameter 19 BSC6900 BSCRESERVEDPA Reserved RA2 parameter 2 BSC6900 BSCRESERVEDPA Reserved RA3 parameter 3 BSC6900 BSCRESERVEDPA Reserved RA4 parameter 4 BSC6900 BSCRESERVEDPA Reserved RA5 parameter 5 BSC6900 BSCRESERVEDPA Reserved RA6 parameter 6 BSC6900 SET OTHSOFTPA Reserved parameter 6 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 7 that is RA(Optional) effective at the BSC level SET OTHSOFTPA Reserved parameter 8 that is RA(Optional) effective at the BSC level SET OTHSOFTPA RA(Optional) ADD BTSMONITO RTS(Mandator y) ADD BTSMONITO RTS(Mandator y) ADD BTSMONITO RTS(Mandator y) SET BSCAISS(Ma ndatory) ADD ATERE1T1(M andatory) ADD ATERSL(Man SET BSCBASIC(M andatory) ADD BTSMONITO RTS(Mandator y) BSCRESERVEDPA Reserved RA7 parameter 7 BSC6900 BSCRESERVEDPA Reserved RA8 parameter 8 BSC6900 BSCRESERVEDPA Reserved RA9 parameter 9 BSC6900 Reserved parameter 9 that is effective at the BSC level BSCSN In-BSC Slot No. BSC6900 In-BSC6900 slot No. of the monitoring timeslot BSCSRN In-BSC Subrack No. BSC6900 BSCSUBTS In-BSC Sub Timeslot No. BSC6900 In-BSC6900 subrack No. of the monitoring timeslot In-BSC6900 sub-timeslot No. of the monitoring timeslot. If the added monitoring timeslot works at 64 kbit/s, the sub-timeslots are numbered from 0. If the added When the BTS clock is adjusted, the offset is added to obtain better network performance. ID of the BSC at the other end of the link. In non-TC pool scenario, this parameter specifies the ID of the primary BSC. In TC pool scenario, this parameter specifies BSCSYMOFF BSC Symbol Offset BSC6900 BSCTID ID of BSC in TC Pool BSC6900 BSCTID ID of a BSC in TC Pool BSC6900 ID of the BSC that supports the TC pool function BSCTS In-BSC Timeslot No. BSC6900 BSCVMAX BS_CV_MAX BSC6900 In-BSC6900 timeslot No. of the monitoring timeslot This parameter is used to set the parameter BS_CV_MAX for MS SET countdown. This parameter is used GCELLPSBA for the MS to calculate the CV. This SE(Optional) parameter also determines the BSMSPWRLEV Transfer BTS/MS Power Class BSC6900 SET Whether to enable the BTS to GCELLHOCT transfer BTS/MS power class to the RL(Optional) BSC ADD GCELL(Option al) SET GCELLIDLEB ASIC(Optional ) BSPAGBLKSRES Number of PAGCH Blocks BSC6900 BSPAMFRAMS Multi-Frames in a Cycle on the Paging CH BSC6900 Number of PAGCH blocksa cycle multiframes in on a paging sub-channel. In fact, this parameter specifies the number of paging sub-channels that a paging channel in a cell is BSPBCCHBLKS Number of PBCCH Blocks BSC6900 ADD GCELL(Option al) Number of PBCCH blocks ADD GCELL(Option al) Number strategy of blocks local General of PRACH the BSS switching, which includes the BSC SET local switching and the BTS local BSSLS(Option switching. The two functions al) cannot be enabled at the same Type of the BSS local switching with the cooperation of the MSC. ADD NONSUPPORT: When performing GCNNODE(O local switching, the BSS need not ptional) determine whether the MSC allows Whether to support the paging function of the CS domain of the A SET interface. Yes: the MS can be GCELLPSBA called upon paging request on the SE(Optional) A interface when the MS uses the SET CLK(Mandator y) Type of the board CON PATCH(Mand atory) Type of the board LOD PATCH(Mand atory) LOD BRD(Mandato Type of the board SET E1T1LOP(Ma ndatory) SET E1T1(Mandat Board type BSPRACHBLKS Number of PRACH Blocks BSC6900 BssLsGenMode BSS Local Switching General Strategy BSC6900 MSCCollaborated BSS Local Switching BSC6900 BSSLSMSCCOOP BSSPAGINGCOOR BSS Paging CoDINATION ordination BSC6900 BT Board type BSC6900 BT Board type BSC6900 BT Board type BSC6900 BT Board type BSC6900 BT Board type BSC6900 LOP E1T1(Mandat ory) Board type STR E1T1TST(Ma ndatory) Board type SET OPT(Mandato ry) Board type SET COPTLNK(Ma ndatory) Board type ADD IPLOGICPOR T(Mandatory) Board type CHK E1T1CRS(Ma ndatory) Boardof the board that controls the Type type RET antenna. ADD 1. DATU: It may represent the BTSRETANT( DATU or the DATM and is Mandatory) applicable to the BTS3012, ADD BTSANTFEE DERBRD(Man Type of the newly added antenna datory) board ADD BTSBRD(Man datory) Type of the newly added board ADD BTSRXUBRD( Type of the newly added RXU Mandatory) board ADD BTSTRXBRD( Mandatory) Type of the board SET BTSANTFEE DERCONNEC T(Mandatory) Type of the board BT Board type BSC6900 BT Board type BSC6900 BT Board Type BSC6900 BT Board Type BSC6900 BT Board type BSC6900 BT Board Type BSC6900 BT Board Type BSC6900 BT Board Type BSC6900 BT Board Type BSC6900 BT Board Type BSC6900 BT Board Type BSC6900 BTCFLAG BM/TC config flag BSC6900 BTCFLAG BM/TC config flag BSC6900 BTSadjust Adjust Voltage BSC6900 BTSBARCODE BTS Bar Code BTS Communication Type BSC6900 ADD ATERE1T1(M The configuration flag specifies the andatory) operation the BM subrack TC. Identifies is on the BM or or TC subrack of the BSC. ADD When this parameter is set to ATERSL(Man "CFGBM", a BM signaling link is datory) added. This parameter specifies whether SET to enable the TRX Working Voltage GCELLBASIC Adjustment feature. When this PARA(Optiona parameter is set to YES, the l) BSC6900 supports the feature SET BTSOMLDET ECT(Mandator y) Bard code of BTS BBU board. SET BTSIP(Option al) Communication type of a BTS Peer equipment the BTS. This parameter indicates whether to connect the BTS to the ADD BSC6900 or cascade the BTS to BTS(Optional) another BTS. switch. If the BTS detection parameter is set to "CLOSE", the SET function of detecting the BTS is BTSOTHPAR disabled. If the parameter is set to A(Optional) "OPEN", the function of detecting BTS index of the adjacent node to ADD be added. The parameter is valid ADJNODE(Ma only when Adjacent node type is ndatory) set to Abis. SET BTSEXCURSI ON(Mandatory ) Index of the BTS, uniquely SET identifying a BTS in a BSC6900. SET BSCABISPRI MAP(Mandato Index of the BTS running the ry) command ADD BTSABISHDL Number of the BTS connected to CPATH(Mand the BSC. The number is unique in atory) a BSC LOD BTSSW(Mand atory) LOD List of BTS indexes. You can BTSPATCH(M specify multiple BTSs by & and &&. BTSCOMTYPE BSC6900 BTSDESC BTS Description BSC6900 BTSDETECTSWITC BTS Detect H Switch BSC6900 BTSID Site Index BSC6900 BTSID BTS Index BSC6900 BTSID BTS Index BSC6900 BTSIDCONBSC Connect BSC BTS Index BSC6900 BTSIDLST BTS Index List BSC6900 BTSIDTYPE BTS Index Type BSC6900 BTSIDTYPE BTS Index Type BSC6900 COL SYNCINFO(M andatory) SET BTSANTANG LE(Mandatory ) ADD BTSOP(Mand atory) ADD BTSAUTOPL AN(Mandatory ) SET Whether to collect offset information by BTS index or BTS name. Index type of the BTS. BYNAME: query by BTS name; BYID: query by BTS index. BTSIDX Site Index Collect BSC6900 BTSIP BTS IP BSC6900 BtsLsStartMode Options for BTS Local Switch BSC6900 BTSMASK Subnet Mask BSC6900 BTSMESRPTPREP MR.Preprocessin ROC g BSC6900 BTSNAME BTS Name BSC6900 Connect BSC BTSNAMECONBSC BTS Name BSC6900 BTSNAMELST BTS Name List BSC6900 BTSPINGSWITCH BTS Ping Switch BSC6900 BTSPOWEROFFLO BTS Power-off CKBCCH Lock BCCH BSC6900 Base station index, 65535 indicate all address of a BTS. When "BTS IP base stations. Com Type" is set to "LOGICIP", the value of the parameter is the IP address of the BTS. When "BTS Com Type"for set to "PORTIP", the Conditions is enabling the function of BTS local switching. SET UNCONDITIONALSTART: The BSSLS(Option function of BTS local switching is al) enabled without restriction. ADD BTSAUTOPL AN(Mandatory ) Subnet mask of BTS. Whether to enable the BTS to SET preprocess measurement reports. GCELLHOCT This parameter determines where RL(Optional) to conduct power control. SET Name of the BTS, uniquely BTSEXCURSI identifying a BTS in a BSC6900. ON(Mandatory This parameter cannot contain , ; = ) " ' more than two (include two) %, SET more than two (include two) space, ADD Connect BSC BTS Name.It is BTSABISHDL unique in one BSC.This parameter CPATH(Mand cannot contain ? | : < > " @ # ! % ^ atory) & * . [ ] / \ \\ '. LOD BTSSW(Mand atory) LOD List of BTS names. You can BTSPATCH(M specify multiple BTSs by &. If the parameter is set to "ON", all SET the Ping packets are sent BTSPINGSW( If the parameter is set to "OFF", all Optional) the Ping packets are discarded. This parameter specifies whether SET the BSC is allowed to shut down BTSLOCKBC the BCCH TRX that is configured CH(Mandatory as "Shut Down Enabled" to save ) power after the BSC receives a BTSPWRNUM BTS PC Class BSC6900 Switch for BTS BTSSAICPCADJSW Supporting SAIC ITCH PC Adjust BSC6900 SET Maximum degree by which the GCELLPWR2( BSC can control the power of the Optional) BTS dynamically Whether to specify "Power Control SET threshold Adjust for SAIC" in the GCELLSOFT( MML command "SET Optional) GCELLPWR3" LOD BTSSW(Mand Software version number of the atory) BTS Transmission compression ratio of a BTS. 1. Modifying the settings of SET "Transfers Compress Rate" may BTSTRCMPR change the bandwidth required by (Mandatory) the BTS. That is, the current ADD BTS(Mandator y) SET BTSALM(Man Type of the BTS ADD BTSAUTOPL AN(Mandatory ) SET Type of the BTS LOD BTSPATCH(M andatory) CON BTSPATCH(M Type of the BTS ADD BTSBFD(Opti Time for which the BTS waits to onal) restore a BFD session STR BTSTST(Man datory) Type of type. loopback test Battery TRX In multi-mode scenario, the value SET of this parameter in one mode BTSAPMUBP( must be the same as the value of Optional) the corresponding parameter at one If the OML is not established in port after a period of time, the OML SET switches to another port and tries BTSRINGATT to connect to this port. That period R(Optional) of time is called ring II rotating ADD SCTPLNK(Opt Whether to enable the data binding ional) function BTSSWVER BTS Software Version Transmission Compression Ratio BSC6900 BTSTRCMPRATE BSC6900 BTSTYPE BTS Type BSC6900 BTSTYPE BTS Type BSC6900 BTSTYPE BTS Type BSC6900 BTSWTR Time for Waiting to Restore BSC6900 BTTSTTYPE BT Test Type BSC6900 BTYPE Battery Type BSC6900 BUILDTIME Ring II Try Rotating Duration Time BSC6900 BUNDLINGFLAG Bundling Flag BSC6900 BVCI PTP BVC Identifier BSC6900 BVCI PTPBVC Identifier BSC6900 ADD PTPBVC(Man datory) BLK PTPBVC(Man ADD GCELLQUICK SETUP(Optio nal) SET BSSGPPARA( Optional) ADD IPLOGICPOR T(Mandatory) ADD TRMLOADTH (Optional) ADD TRMLOADTH (Optional) ADD TRMLOADTH (Optional) ADD TRMLOADTH (Optional) ADD TRMLOADTH (Optional) ADD TRMLOADTH (Optional) ADD TRMLOADTH (Optional) ADD TRMLOADTH (Optional) BVCTF BVC Flow Control Timer BSC6900 BWADJ Auto adjust bandwidth switch BSC6900 Backward congestion remain bandwidth BSC6900 BWDCONGBW Backward congestion clear BWDCONGCLRBW remain bandwidth BSC6900 Backward congestion clear remain ratio BWDCONGCLRTH BSC6900 Backward congestion BWDCONGTH remain ratio Backward overload BWDOVLDCLRRSV congestion clear BW remain bandwidth Backward overload congestion clear BWDOVLDCLRTH remain ratio Backward overload congestion BWDOVLDRSVBW remain bandwidth Backward overload congestion BWDOVLDTH remain ratio BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 Identifies a unique PTP BVC with NSE The BSSGP virtual connection identifier. It is used to identify multiple BVCs that multiplexes the NS-VC. Duration of BVC flow control timer F. A cell sends the flow control message at the interval specified by this timer. Switch for adjusting the dynamical bandwidth of the logical port. If this switch is turned on, the system adjusts the dynamical bandwidth of the logical port backward to the If the available according bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward congestion control is If the available backward bandwidth is greater than this value, the backward congestion alarm is cleared and backward congestionof available backward If the ratio control is stopped. bandwidth is greater than this value, the backward congestion alarm is cleared and backward congestionof available backward If the ratio control is stopped. bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward congestion control is If the available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward overload control is If the ratio of available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward overload control is If the available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward overload control is If the ratio of available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward overload control is BWDRESVHOTH BWDRSVHOBW Backward handover reserved ratio Backward handover reserved bandwidth BSC6900 ADD TRMLOADTH Ratio of reserved backward (Optional) bandwidth for handover user ADD TRMLOADTH Reserved backward bandwidth for (Optional) handover user ADD IPLOGICPOR Maximum ratio of the estimated T(Optional) bottleneck bandwidth ADD RSCGRP(Man datory) Bandwidth of bandwidth change Threshold mode based on the load control ADD algorithm. When the system IPLOGICPOR detects that the change of the T(Optional) available bandwidth exceeds this Threshold for reporting the uplinkdownlink imbalance alarm. If the SET percentage of the uplink-downlink GTRXRLALM( imbalance measurement reports in Optional) the total valid measurement reports ADD NCELL(Mand atory) COL Index type. The value can be SYNCINFO(M BYIDX or BYNAME. SET GCELLRESEL Whether the reselection hysteresis ECTPARA(Op parameter is applied to the C31 tional) criterion GPRS cell reselection Whether SET offset is used for C32 calculation GCELLRESEL during cell reselection. If this ECTPARA(Op parameter is set to 1, then only the tional) positive hysteresis of the ADD BTSCABINET Descriptive information of the BTS (Optional) cabinet SET BTSRACKBC( List of all the cabinet numbers in Mandatory) the BTS ADD CAB(Mandato Whether the added cabinet is a ry) remote cabinet BSC6900 BWMAXRATIO Max bandwidth estimate ratio [%] BSC6900 BWMODE BWRTPTH Bandwidth Mode BSC6900 Load Control algorithm BandWidth THD[%] BSC6900 Up Down Balance Alarm Threshold BWTHD BSC6900 BYCELLTYPE C31HYST Cell Index Type GPRS Cell Reselect Hysteresis Applied to C31 Criterion BSC6900 BSC6900 C32QUAL Exceptional Rule for GPRS Reselect Offset BSC6900 CABINETDESC Cabinet Description BSC6900 CABLST Cabinet List BSC6900 CABT Is remote cabinet BSC6900 CALLRESTABDIS Call Reestablishment Forbidden BSC6900 SET GCELLBASIC PARA(Optiona l) Whether to allow call reestablishment. Burst interference or blind spots due to high buildings may lead to a radio link failure. If a call drop is caused by such a CALVAL Calibration Value BSC6900 CANPC PWRC BSC6900 Capacity and CAPCOVEROPTSW Coverage ITCH Optimize Switch BSC6900 SET BTSCLKPAR A(Mandatory) Calibration valueuses the Whether an MS of the clock calculated value as the final receive SET level value. The calculated receive GCELLCCCH( level value is the measured receive Optional) level value minus the receive level Whether to enable the capacity and SET coverage of the BTS to be BTSAUTOPL automatically optimized according ANCFG(Optio to the actual situation of the nal) incumbent network. ADD BTSBRD(Opti onal) Card Frequency Attribute IP Whether to indicate that the Path is carried on the IP logic port ADD or resource group. NULL indicate IPPATH(Optio the IP Path is carried on the nal) physics port. ADD IPLOGICPOR T(Optional) Bearer type of the logical port STR IPCHK(Option al) SET GCELLIDLEB ASIC(Optional ) CARDFREATTR Card Frequency Attribute BSC6900 CARRYFLAG Carry Flag BSC6900 CARRYT The bearing type of the logic port BSC6900 CARRYT Carry port type BSC6900 CBA Cell Bar Access BSC6900 Port type of thewith "Cell Barbearer Used together SBFD/ARP Qualify" to decide the priority status of a cell. Refer to GSM Rec. 04.08. Cell Bar Qualify Cell Bar Access Cell selection priority Cell CBCINDEX CBC INDEX BSC6900 ADD GCBSADDR( Uniquely identifying a cell Mandatory) broadcast center (CBC) ADD GCBSADDR( Mandatory) IP address of a CBC CBC interface parameter. The value of this parameter must be ADD translated into a binary numeral. GCBSADDR( The following describe each bit of Optional) the value: CBCIP CBC IP BSC6900 CBCITFPARA CBC ITF Para BSC6900 CBCPORT CBC Port Cb No Message Disconnection Timer BSC6900 CbNonMsgTimer BSC6900 CBQ Cell Bar Qualify BSC6900 ADD GCBSADDR( Port number at the CBC side in the Mandatory) communication with the BSC6900 Duration of no cell broadcast message at the Cb interface. If the SET BSC6900 does not receive any BSCTMR(Opti message from the CBC during the onal) presettogether with "Cell Bar the Used value of this parameter, SET Access" to decide the priority GCELLIDLEB status of a cell. See GSM Rec. ASIC(Optional 0408. This parameter does not ) affect cell reselection but cell ADD IPLOGICPOR T(Optional) Maximum burst size (MBS) Timer interval for sending handshake messages. According SET to the value of this parameter, the BSCTMR(Opti BSC6900 regularly sends the CBC onal) a handshake message to decide Number of enhanced measurement reports (EMRs) SET sampled for averaging the GCELLHOFIT CV_BEP on the SDCCH. PEN(Optional) Averaging the CV_BEP in multiple Number of enhanced measurement reports (EMRs) SET sampled for averaging the GCELLHOFIT CV_BEP on the TCH. Averaging PEN(Optional) the CV_BEP in multiple EMRs SET BSCBASIC(O Country code, for example, 86 for ptional) China Whether to enable the certificate chain SET DISABLE: indicating that the CERTFILE(Op certificate chain is disabled tional) ENABLE: indicating that the Time interval for sending overload messages, used for the BTS to SET notify the BSC6900 of the load over GCELLCCCH( a specific CCCH timeslot. See Optional) GSM Rec. 0508. to notify the Used for the BTS BSC6900 of the load over a SET specific CCCH timeslot, that is, the GCELLCCCH( load of the access request Optional) messages over the RACHs and all SET BSCPSTCDS CPMAP(Optio DSCP corresponding to the nal) session service CBS Consent burst size [Byte] BSC6900 Cell Broadcast Handshake CbShakeHandTimer Timer BSC6900 CBSIGNLEN Filter Length for SDCCH CV_BEP BSC6900 CBTRAFFLEN Filter Length for TCH CV_BEP BSC6900 CC CC BSC6900 CCAEnableSta Certificate Chain File Enabled State BSC6900 CCCHLOADINDPR D CCCH Load Indication Period BSC6900 CCCH Load CCCHLOADTHRES Threshold BSC6900 CCDSCP DSCP of CONV[QoS] BSC6900 CCMINTERVAL CCM Send Prid BSC6900 Cell Directed CDRTTRYFBDTHR Retry Forbidden ES Threshold BSC6900 CELL1800OFF 1800 Reporting Offset BSC6900 CELL1800THRED 1800 Reporting Threshold BSC6900 CELL2GBA1BCCH 2G NCELL BCCH BSC6900 CELL2GBA1TAG 2GBA1 Input Tag BSC6900 CELL2GBA2BCCH 2G NCELL BCCH BSC6900 CELL2GBA2TAG 2GBA2 Input Tag BSC6900 Cell 8PSK Power CELL8PSKPOWERL Attenuation EVEL Grade BSC6900 CELL900OFF 900 Reporting Offset BSC6900 CELL900THRED 900 Reporting Threshold BSC6900 Cell Access Bar CELLBARACCESS2 Switch BSC6900 ADD ETHMA(Optio Transmission period of the CCM nal) packet in the forbidding directed Threshold of MA retry for cells. When the value of SET "Assignment Cell Load Judge GCELLOTHE Enable" in "SET GCELLCCBASIC" XT(Optional) is ENABLE, if cells support directed Offset of the measurement report SET about the cells at the 1800 MHz GCELLCCUT frequency. Before cells are RANSYS(Opti sequenced by priority according to onal) frequencies, the value of this Threshold of the measurement SET report about the cells at the 1800 GCELLCCUT MHz frequency. When the receive RANSYS(Opti level value in the measurement onal) report about the cells at the 1800 BCCH frequency of a 2G neighbor cell that MSs can measure in idle SET mode. Recording the BCCH GCELL2GBA1 frequencies of 2G neighbor cells (Mandatory) that MSs to generate the 2G BA1 Whether can measure in idle table automatically according to SET neighbor cell relations or to input GCELL2GBA1 the 2G BA1 table manually. (Mandatory) Recording the BCCH frequencies BCCH frequency of a 2G neighbor SET cell that MSs can measure in GCELLHO2G dedicated mode. Recording the BA2(Mandator BCCH frequencies of 2G neighbor y) cells parameter indicate whether to This that MSs can measure in SET generate the 2G BA2 table GCELLHO2G automatically according to neighbor BA2(Mandator cell relations or to input the 2G BA2 y) table manually. Recording the of Timeslot power attenuation level SET the EDGE TRX in 8PSK. The GCELLBASIC attenuation level ranges from 0 to PARA(Optiona 50, each of which corresponds to l) an attenuation to the receive level Offset applied of 0.2 dB. SET of a GSM900 cell in the GCELLCCUT measurement report before RANSYS(Opti prioritizing cells by frequency onal) bands. Before cells are sequenced Threshold of the measurement SET report of the cells at the 900 MHz GCELLCCUT frequency. The measurement RANSYS(Opti report is valid only when the onal) receive level cell can be added to Whether the in the measurement SET the reselected candidate cell list. If GCELLSERV this parameter is set to "NoPermit", PARA(Optiona the cell cannot be reselected as the l) candidate cell for handover. If this CELLCOVERAGETY Cell Coverage PE Type BSC6900 Even Charging CELLEQUCHGVOL Voltage BSC6900 Even Charging CELLEQUCHGVOL Voltage BSC6900 CELLFLOATCHGVO Float Charging L Voltage BSC6900 CELLFLOATCHGVO Float Charging L Voltage BSC6900 CELLID Cell Index BSC6900 If the coverage type of a cell is outdoor coverage, the BTS detects SET whether the standing wave alarm is GCELLOTHE generated only when the forward XT(Optional) power is greater than 35 dBm. Even charging voltage of the SET battery. The battery is charged at BTSPMUBP( the voltage as specified by this Optional) parameter. Even charging voltage of the battery. The battery is charged at SET the voltage as specified by this BTSDPMUBP( parameter. Optional) In multi-mode scenario, the value Float charging voltage of the SET battery. The battery is charged at BTSPMUBP( the voltage as specified by this Optional) parameter. Float charging voltage of the battery. The battery is charged at SET the voltage as specified by this BTSDPMUBP( parameter. Optional) In multi-mode scenario, the value ADD GCELLFREQ( Mandatory) ADD Index of a cell, uniquely identifying GCELLMAGR a cell in a BSC6900 SET GMRSCOPE( Mandatory) SET GCELLHOINT ERRATLDB(M andatory) ID of the cell. The cell ID cannot conflict with other cell IDs in the BSC. CELLID Cell Index BSC6900 CELLID Cell Index BSC6900 Index of a cell, uniquely identifying a cell in a BSC CELLID Cell Index BSC6900 ADD BTSRETANT( Index of a cell, uniquely identifying Mandatory) a cell in a BSC6900 ADD BTSAUTOPL Index of the cell. It uniquely AN(Optional) identifies a cell. SAV GCELLTEMP LATE(Mandat ory) Cell of the user-defined neighbor List Index cells to be measured. This STR parameter is represented as a NCS(Mandato character string where the IDs of ry) the cells to be measured are CELLID Cell Index BSC6900 CELLID Cell Index BSC6900 CELLIDLST Cell List BSC6900 CELLIDTYPE Cell Index Type BSC6900 SET FHO(Mandato Index type of a cell when this ry) command is executed ADD BTSRETANT( Mandatory) SET BTSANTANG LE(Mandatory ) ADD GCELL(Mand atory) ADD GEXT3GCEL L(Optional) ADD GSMSCB(Opti onal) SET MSGSOFTPA RA(Optional) SET GCELLCHMG BASIC(Option al) ADD GCELLFREQ( Mandatory) ADD GCELLMAGR SET GCELLHOINT ERRATLDB(M andatory) ADD BTSAUTOPL AN(Mandatory ) SAV CELLIDTYPE Cell Index Type BSC6900 Index type of the cell Index type of the cell. BYNAME: query by cell name; BYID: query by cell index. This parameter specifies whether a cell is the OL subcell or the UL subcell. This parameter is applied to the enhanced dualband cell. Layer of the cell. If the layer of the cell is lower, it is more likely that a handover to the cell will be triggered. List of cell indexes. All cell indexes are combined as a character string, separated by "&". For example, 1&2&5. an assignment complete Whether message contains a cell list. According to GSM Rec. 08.08, during a channel assignment, an assignment completeSDCCHs in Maximum number of message the cell. Before converting a TCH into an SDCCH, the BSC compares the number of SDCCHs after the conversion in the cell with CELLIDTYPE Cell Index Type BSC6900 CELLINEXTP Cell Inner/Extra Property BSC6900 CELLLAYER Layer of the cell BSC6900 CELLLIST Cell Index List BSC6900 CellListOptionSend Cell List Send Flag in ASS CMP BSC6900 Cell SDCCH Channel Maximum CELLMAXSD BSC6900 CELLNAME Cell Name BSC6900 Name of a cell, uniquely identifying a cell in a BSC6900 CELLNAME Cell Name BSC6900 Name of a cell, uniquely identifying a cell in a BSC CELLNAME Cell Name BSC6900 CELLNAMELIST Cell Name List BSC6900 Name cell names. All cell names List of of a cell. are combined as a character string, ADD separated by "&". For example, GSMSCB(Opti cell1&cell2&cell5. The cell name onal) should not contain the following CELLOPPWRGRP Cell Operator Power Group BSC6900 Cell Over CELLOVERCVGRX Coverage DL LEVDLTH RxLev Threshold BSC6900 Cell Over CELLOVERCVGTAL Coverage TA TH Threshold Cell Paging CELLPAGINGOVER Overload LOADCOUNTER Threshold BSC6900 BSC6900 CELLPWROFFEN Battery Power-off Allowed State BSC6900 Battery Power-off CELLPWROFFVOL Voltage BSC6900 2G/3G Cell CELLRESELSTRAT Reselection EGY Strategy Cell Rx Quality CELLRXQUALWOR Worsen Ratio SENRATIOTHRSH Threshold BSC6900 BSC6900 CELLSCENARIO Cell Scenario BSC6900 Select 3G Cell CELLSELECTAFTE After Call RCALLREL Release BSC6900 High Temp Alarm CELLTEMP1ALARM Assembled H Battery1 BSC6900 Low Temp Alarm CELLTEMP1ALARM Assembled L Battery1 BSC6900 SET GCELLCHMG Power of each passage on the AD(Optional) MRRU in the the downlink receive Threshold of cell level of an over-coverage cell. If the SET downlink level of a cell is higher GCELLOTHE than the value of this parameter XT(Optional) and the timing advancean overThreshold of the TA of (TA) is coverage cell. If the downlink level SET of a cell is higher than the value of GCELLOTHE this parameter and the timing XT(Optional) advance (TA) is greater than the Maximum number of reported paging overload messages in the SET cell. If the BSC allows the flow GCELLSOFT( control on the re-paging messages, Optional) and the number of the reported of Whether to allow the power-off the battery. SET In multi-mode scenario, the value BTSDPMUBP( of this parameter in one mode Optional) must bepower-off voltage.value of Battery the same as the In multi-mode scenario, the value SET of this parameter in one mode BTSDPMUBP( must be the same as the value of Optional) the corresponding parameter in This parameter specifies whether a SET 2G cell or 3G cell is selected in the GCELLNC2P inter-RAT cell reselection ARA(Optional) procedure. of times that the The number downlink transmission quality of the SET MS is lower than the transmission GCELLNC2P quality threshold of the MS ("EDGE ARA(Optional) GMSK Quality Threshold",scenario. Information about the cell "EDGE SET It needs to be sent to the BTS. GCELLBASIC Based on the information, the BTS PARA(Optiona optimizes the allocation of l) resources. This parameter specifies whether to allow a mobile phone to SET preferentially camp on a 3G cell GCELLCCAD( after a call is terminated in the Optional) areas covered byan alarm GSM The BTS reports both the if the temperature of battery group 1 SET exceeds the value of this BTSDPMUBP( parameter. Optional) In multi-mode scenario, the value The BTS reports an alarm if the temperature of battery group 1 is SET lower than the value of this BTSDPMUBP( parameter. Optional) In multi-mode scenario, the value Upper CELLTEMP1THRES Assembled HOLDH Battery 1 Temp Lower Assembled CELLTEMP1THRES Battery1 TEMP HOLDL Measure Battery Temperature Compensated CELLTEMPCOMPE Configure NABLED Enabled BSC6900 BSC6900 BSC6900 SET BTSAPMUBP( Optional) SET BTSDPMUBP( SET BTSAPMUBP( Optional) SET BTSDPMUBP( SET BTSAPMUBP( Optional) SET BTSDPMUBP( Cell Weak CELLWEAKCVGRX Coverage DL LEVDLTH RxLev Threshold BSC6900 Cell Weak CELLWEAKCVGTA Coverage TA LTH Threshold BSC6900 CENDTHD Congestion End Threshold BSC6900 Upper limit of the temperature measured by the temperature sensor of the battery group 1. If the measured value is greater than the value of this parameter, the value Lower limit of the temperature measured by the temperature sensor of the battery group 1. If the measured value is smaller than the value of thisallow the configuration Whether to parameter, the value of parameters related to the temperature compensation of the battery group In multi-mode scenario, the value Threshold of the downlink receive level of an weak-coverage cell. If SET the downlink level of a cell is lower GCELLOTHE than the value of this parameter XT(Optional) and the timing advancean weakThreshold of the TA of (TA) is coverage cell. If the downlink level SET of a cell is lower than the value of GCELLOTHE this parameter and the timing XT(Optional) advance (TA) stopping LAPD the Threshold for is smaller than link congestion control. This parameter SET cannot be set too small. If this GTRXFC(Opti parameter is set too small, the onal) congestion control duration is too SET CERTFILE(Ma ndatory) SET BTSFMUABP( Mandatory) SET BTSNFCBBP( SET BTSIP(Option al) SET BTSAUTOPL ANCFG(Mand atory) SET BTSCABPAR A(Mandatory) SET BTSPOWERT YPE(Mandator y) CertChain Certificate Chain File Name BSC6900 Board Parameter Configuration Enabled BSC6900 CFGFLAG Name of the certificate chain file Whether to allow the configuration of alarm parameters. The value "YES" indicates that the configuration is allowed, and the value "NO" indicates that the Indicates whether the IP path is carried on the IP logic port or the resource group. modes include BTS configuration auto plan mode and normal mode. In auto plan mode, the user can enable the auto planning algorithms and auto optimization Whether to enable the board parameters to be configured. If this parameter is set to "YES", the user can set board parameters of the BTS cabinet. Otherwise, the user Whether to enable the board parameters to be configured. If this parameter is set to "YES", the user can set the cabinet power type. Otherwise, the user cannot set the CFGFLAG Carry Flag BTS Configuration Mode BSC6900 CFGMODE BSC6900 CFLAG Board Parameter Configuration Enabled BSC6900 Board Parameter Configuration Enabled BSC6900 CFLAG CFM Confirm Password BSC6900 CG Command Group BSC6900 ADD OP(Mandatory ) ADD CCG(Mandato ry) SET CCGN(Manda Confirm password. The confirm password is required to ensure that a correct password is entered. Customized command group to be processed CG Command Group BSC6900 CGET Congestion End Threshold BSC6900 CGET Congestion End Threshold BSC6900 CGIRACSWITCH CGI and RAC Plan Switch BSC6900 This parameter is valid only when the operator belongs to the custom level. Congestion end threshold. If the congestion end threshold is large, the congestion control ends earlier. As a result, the congestion control effect is poor. The work of the Ater Congestion end threshold. If the congestion end threshold is large, ADD the congestion control ends earlier. PBSL(Optiona As a result, the congestion control l) effect parameter is work status of If the is poor. The set to 1, it SET indicates that the CGI and RAC BTSAUTOPL data is generated through ANCFG(Optio automatic planning. If the nal) parameter is set to 0, it indicates ADD OP(Optional) ADD ATERSL(Opti onal) ADD ATERCONSL( SET CCGN(Option Name of the command group. You al) can define the name. SET BTSIDLETS( Mandatory) ADD ATERSL(Opti onal) ADD ATERCONSL( Optional) ADD PBSL(Optiona l) ADD G2GNCELL(O ptional) CGN Command Group Name BSC6900 CGN Cabinet Group No. BSC6900 CGST Congestion Start Threshold BSC6900 CGST Congestion Start Threshold BSC6900 CGST Congestion Start Threshold BSC6900 Chain Neighbour CHAINNCELLTYPE Cell Type BSC6900 Number of the cabinet group where the idle timeslot is located. If Congestion start threshold. congestion start threshold is set to a large value, there will be a time lag in the congestion control and, the work of the signaling link gets Congestion start threshold. If congestion start threshold is set to a large value, there will be a time lag in the congestion control and, the work of the signaling link gets Congestion start threshold. If congestion start threshold is set to a large value, there will be a time lag in the congestion control and, the work of the signaling link gets This parameter indicates the geographical location relation between the neighboring cell and the serving cell. In the BSC6900, if direction A is selected, then the CHAINTORING Combine Type BSC6900 CHALLOCSTRATE GY Channel Allocate Strategy BSC6900 PDCH Available Threshold of Channel Failure CBN BTSRXUCHAI N(Mandatory) SET GCELLCHMG BASIC(Option al) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSBC(O ptional) ADD GSMSCB(Ma SET GCELLCHMG AD(Optional) SET AITFOTHPAR A(Optional) SET GCELLSOFT( Optional) CHANFAULTALMP DCHTH BSC6900 CHANFAULTALMS WITCH Monitoring Alarm Switch for Channel Failure BSC6900 TCH Available CHANFAULTALMTC Threshold of HTH Channel Failure BSC6900 CHANID Chan ID BSC6900 CHANINTERMESAL Active CH Interf. LOW Meas.Allowed Channel Rate CHANNELRATECO Type Decode DE Expand PDCH Out-ofSynchronization Period BSC6900 BSC6900 CHANPDOUTTIME BSC6900 Combination type of chains. "CHAINTORING" indicates that one chain changes to a ring, and "COMBINECHAINS" indicates that two chains are combined into one Channel assignment priority of the cell If this parameter is set to CAPABILITY, the factors are listed as follows in a descending order of This parameter specifies the proportion of available PDCHs in a cell (for faulty channels, only the PDCHs that are blocked due to Abis parameter determines This timeslot failure are whether to activate the function of monitoring the failure of logical channels in a cell. When this function is activated and the This parameter specifies the proportion of available TCHs in a cell (for faulty channels, only the TCHs that are blocked due to Abis timeslot failure are considered). Channel number of a simple cell broadcast message. This is a key parameter for adding a simple cell broadcast message. You can use "DSP GSMSCB" to querychannel Whether to measure the and interference during channel assignment. If this parameter is set to NO, the BSC does not measure the channel interference or send an When the value of this parameter is YES, if the assignment request message sent by the MSC contains the channel rate type indicating the support of both fullused half rates, This parameter is and to check whether the Abis timeslot for the PDCH is faulty. When the out-ofsynchronization period of the PDCH primary link exceeds the CHECKCOUNT Ping Check Timeout Counts BSC6900 Auto Check of CheckingBTSConne BTS Connection ction Port BSC6900 ChkModA ANT_A ALD Current Detection Mode BSC6900 ADD Number of ping check timeouts. IPPATH(Optio The parameter indicates the nal) number of timeout record failures. Whether to enable the BSC to check automatically whether a BTS SET is connected a proper E1 port in OTHSOFTPA the EIUa. If a BTS is connected to RA(Optional) an E1 port configured for another Alarm mode of the ANT_A tributary of an RXU board. There are three SET alarm modes. Alarm mode 1 has BTSRXUBP(O only one type of alarms. The alarm ptional) current is fixed and greater than ChkModB ANT_B ALD Current Detection Mode BSC6900 Alarm mode of the ANT_B tributary of an RXU board. There are three SET alarm modes. Alarm mode 1 has BTSRXUBP(O only one type of alarms. The alarm ptional) current is fixed and greater than STR Detection index. The index is a IPCHK(Option unique value ranging from 0 to 511 al) if it is not specified. ADD IPPATHBIND( Mandatory) Detection index SET Total number of times that the BTS BTSAIRCON( checks whether to switch off the air Optional) conditioner SET Total number of times that the BTS BTSAIRCON( checks whether to switch on the air Optional) conditioner ADD SCTPLNK(Opt Whether to perform checksum ional) when receiving message ADD SCTPLNK(Opt Whether to perform checksum ional) when sending message Checksum arithmetic type. According to the RFC4960, the ADD ALDER32 algorithm is not SCTPLNK(Opt applicable to the SCTP checksum. ional) The CRC32 is recommended. STR Type of the detection that is IPCHK(Manda performed between the BSC and tory) the gateway. STR BTSTST(Man datory) Duration SET BTSCHNFALL BACK(Mandat ory) Number of the channel in the TRX SET TCPLYVOICE (Mandatory) Timeslot for playing sound CHKN Check Index BSC6900 CHKN Check Index BSC6900 CHKOFFTIMES Check Times for Off BSC6900 CHKONTIMES Check Times for On BSC6900 Calculate checksum when receive message BSC6900 Calculate checksum when send message CHKSUMRX CHKSUMTX BSC6900 CHKSUMTYPE Checksum arithmetic BSC6900 CHKTYPE Check type BSC6900 CHLDURATH Duration Hour BSC6900 CHNNO Channel No. BSC6900 CHNNO Channel No. BSC6900 CHNO Channel No. BSC6900 SET FHO(Mandato ry) SET GTRXCHANH Number of the channel in the TRX STR BTSTST(Man datory) SET BTSCHNFALL BACK(Mandat ory) CHNTSTTYPE Channel Test Type BSC6900 CHNTYPE Channel Type BSC6900 Type of channel the timeslot on the Channel type of loopback test TRX. The channel type of timeslot 0 must not be set, because the combined BCCH is configured by default. The channel type of other ChosenCh Send ChosenChInAssCmp Flag in ASS CMP BSC6900 ChosenCh Send ChosenChInHoPerfo Flag in HO rm Perform BSC6900 ChosenCh Send ChosenChInHoReqA Flag in HO REQ ck ACK BSC6900 ChosenEncrypAl g Send Flag in Cipher CMP BSC6900 ChosenEncrypAl g Send Flag in HO Perform BSC6900 ChosenEncrypAl o Send Flag in ASS CMP BSC6900 ChosenEncrypAl o Send Flag in HO REQ ACK BSC6900 SET Whether an assignment complete MSGSOFTPA message contains the information RA(Optional) element of Chosen Channel SET Whether a handover performed MSGSOFTPA message contains the information RA(Optional) element of Chosen Channel SET Whether an HO REQ ACK MSGSOFTPA message contains the information RA(Optional) element of Chosen Channel Whether an encryption complete SET message contains the information MSGSOFTPA element of Chosen Encryption RA(Optional) Algorithm Whether a handover performed SET message contains the information MSGSOFTPA element of Chosen Encryption RA(Optional) Algorithm Whether an assignment complete SET message contains the information MSGSOFTPA element of Chosen Encryption RA(Optional) Algorithm Whether an HO REQ ACK SET message contains the information MSGSOFTPA element of Chosen Encryption RA(Optional) Algorithmto allow a multi-density Whether TRX board that uses the dynamic SET power sharing algorithm to assign GCELLCHMG channels to assign a channel to an AD(Optional) MS when the remaining power on Maximum number of allowable CS SET domain channel request messages BSCFCPARA( within the value of "CHAN REQ Optional) Statistical Period" ChosenEncrypAlgIn CiphCmp ChosenEncrypAlgIn HoPerform ChosenEncrypAloIn AssCmp ChosenEncrypAloIn HoReqAck Channel Assign CHPWRINSUFFALL Allow for Insuff OWED Power Max CS CHAN REQ Num in Period BSC6900 CHREQCSMAXMS GNUMINPERIOD BSC6900 CHREQPSAVGMSG Average PS NUMINPERIOD CHAN REQ Num BSC6900 CHREQSTATPERIO CHAN REQ D Statistical Period BSC6900 Average number of allowable PS SET domain channel request messages BSCFCPARA( within the value of "CHAN REQ Optional) Statistical Period" the arrival rate of Statistic period of channel request messages. Within SET the preset value of this parameter, BSCFCPARA( the BSC6900 counts the number of Optional) channel request messages. Once Type and function of the channel SET GTRXCHAN( Optional) ADD GCELL(Mand atory) ADD GEXT2GCEL SET BTSAUTOPL ANCFG(Optio nal) Combined BCCH+7TCH CHTYPE Channel Type BSC6900 CI Cell CI BSC6900 CI1 Cell CI BSC6900 CIC CIC BSC6900 CIC CIC BSC6900 Main BCCH+SDCCH/8+6TCH a Identity code of a cell, A cell is wireless coverage area identified by a base station identity code and a global cell identification. Can be input in hexadecimal Cell identity code. The cell is a radio coverage area that is identified by the BTS identity code and global cell identity code. Indicates the A interface CIC. When operation mode is set to BLK OPC index, DPC group index, BSC ACIC(Mandat ID, or CIC, the parameter is ory) mandatory. The parameter Indicates the Pb interface CIC. If the search object mode is set to BLK search by the specified No., the PBCIC(Manda parameter is mandatory. tory) The parameter supports multiple SET Whether an assignment failure MSGSOFTPA message contains the information RA(Optional) element of Circuit Pool SET Whether an HO FAIL message MSGSOFTPA contains the the information RA(Optional) element of Circuit Pool Whether an assignment failure SET message contains the the MSGSOFTPA information element of Circuit Pool RA(Optional) List SET Whether an HO FAIL message MSGSOFTPA contains the the information RA(Optional) element of Circuit Pool List SET Whether an assignment complete MSGSOFTPA message contains the information RA(Optional) element of Circuit Pool CicPoolInAssFail CIC Pool Send Flag in ASS Fail BSC6900 CicPoolInHoFail CIC Pool Send Flag in HO Fail BSC6900 CIC Pool List Send Flag in ASS CicPoolListInAssFail Fail BSC6900 CIC Pool List Send Flag in HO Fail BSC6900 CicPoolListInHoFail CicPoolSendFlagInA CIC Pool Send ssCmp Flag in ASS CMP BSC6900 CIC Pool Send CicPoolSendFlagInH Flag in HO REQ oAck ACK BSC6900 SET Whether an HO REQ ACK MSGSOFTPA message contains the information RA(Optional) element of Circuit Pool ADD IPLOGICPOR T(Optional) Bandwidth of the logical port This parameter specifies the estimated carrier-to-interference SET ratio of a new call. It is used for the GCELLCHMG Huawei power control algorithm III AD(Optional) to calculate the power of the call. ADD DXXCONNEC Slot number of the BSC6900 board T(Mandatory) that is connecteds to the BTS ADD DXXCONNEC Subrack number of the BSC6900 T(Mandatory) board that is connected to the DXX SET Whether the cell supports the MS GCELLGPRS( with the DTM multi-timeslot Optional) capabilityto enable11 BSC to Whether of class the include the 3G classmark SET information element in the OTHSOFTPA Classmark Request message that RA(Optional) the BSC forwards from the MSC to ADD MPGRP(Optio nal) Error clear threshold. SET BTSCLKPAR A(Mandatory) Clock mode SET BTSIPCLKPA Type of the clock protocol for the IP RA(Optional) clock server SET CLKTYPE(Ma ndatory) Type of the clock board Clock mode of the BTS. If this parameter is set to INT_CLK, SET the BTS does not track any BTSCLK(Man external clock. The internal high datory) precision clock works in free-run CIR Bandwidth [64kbps] BSC6900 CIRESTVALUE C/I Estimate Value BSC6900 CIUSLOTNO Slot No. BSC6900 CIUSUBRACKNO Subrack No. BSC6900 CLASS11DTM Support Class11 DTM BSC6900 Classmark CLASSMARKQUER Enquiry With 3G Y Request BSC6900 CLEARTHD Error clear threshold BSC6900 CLKMOD Clock Mode BSC6900 CLKPRTTYPE Clock Protocol Type BSC6900 CLKTYPE Clock board type BSC6900 ClkType Clock Type BSC6900 ClrDelay Clear Command Delay Time BSC6900 CLRFLG Alarm Cleared Flag BSC6900 SET BTSTHEFTAL M(Optional) EXP ALMLOG(Opti onal) STA ALMLOG(Opti Delay for which the BTS waits to run the burglar alarm clearance command after reporting the burglar alarm Whether the alarm to be queried is cleared. You can select "cleared" or "uncleared", or both of them. By default, both of them are selected. ClrInterval Clear Command Time Interval BSC6900 SET Interval at which the BTS runs the BTSTHEFTAL burglar alarm clearance command M(Optional) automatically Name of the command to be EXP queried. You can select one or LOG(Optional) more commands. ADD CCG(Mandato You can select one or more ry) commands. ADD SUBCMD(Ma Sequence number of the command ndatory) string of the scheduled subtask. ADD CAB(Mandato ry) SWP BTSRING(Opt ional) SWP BTSOMLLINK ADD BTSBFD(Opti onal) ADD BTSIPRTBIN ADD BTSSFPMOD E(Optional) SET BTSFORBIDT LOD RETANTCFG( Optional) SET BTSANTANG CMD Command Name BSC6900 CMD Command Name BSC6900 CMDSEQ Command Sequence BSC6900 CN Cabinet No. BSC6900 Number of the cabinet CN Cabinet No. BSC6900 Number of the cabinet CN Cabinet No. BSC6900 Number of the cabinet CN Port Cabinet No. BSC6900 Number of the cabinet where the port is located CN Cabinet No. BSC6900 CNFAULTDELAY CN Fault Delay BSC6900 Number of thethe detection on core Time delay of cabinet network interface failure. Within the SET preset value of this parameter, the GBSCREDGR BSC6900 continuously detects P(Optional) core network interface failures and CNID MSC ID BSC6900 CNID SGSN Node ID BSC6900 CNNODEIDX CN Node Index BSC6900 ADD GCNNODE(M andatory) ADD NSE(Mandato ry) ADD SGSNNODE( ADD NRIMSCMAP( Mandatory) SET MSGSOFTPA Used to uniquely identify an MSC Identifies a node of SGSN with the operator name uniquely Index of an MSC. It is used in storing and querying the MSC attributes CNOPERATORIND EX Operator Index BSC6900 CNSTATEPOLICYF CN State Policy ORGROUP For Group BSC6900 CMP LICENSE(Opti onal) Index of the operator for judging Policy of the BSC6900 whether the interface status of the SET core network is normal. If the value GBSCREDGR is NONE, the BSC6900 does not P(Optional) change the service management EXP Number of returned alarm records. ALMLOG(Opti By default, all records can be onal) returned in each query. SET Type of the cabinet. The slot and BTSBAT(Man subrack arrangements in a cabinet datory) vary according to the cabinet type. SET BTSDPMUBP( Type of the BTS cabinet where the Mandatory) DMPU is installed SET LOGLIMIT(Op Maximum number of records tional) allowed in the operation logis not 0. Assume that this threshold When the accumulated number of SET alarm blink times exceeds the ALMBLKPAR threshold, the alarm is reported. A(Optional) For querying the alarm blink not 0. Assume that this threshold is When the number of alarm blink SET times is smaller than the threshold, ALMBLKPAR the alarm is reported. For querying A(Optional) the alarm blink measurement SET Whether to adjust the candidate GCELLHOBA cell queue to give priority to intraSIC(Optional) BSC/MSC handover CNT Records to Return BSC6900 CNT Cabinet Type BSC6900 CNT Cabinet Type BSC6900 CNTL Counts Limit Upper count threshold of raised fault Lower count threshold of raised fault BSC6900 CNTRISTHRD BSC6900 CNTSTLTHRD BSC6900 COBSCMSCADJEN Co-BSC/MSC Adj BSC6900 CODE Code BSC6900 COLDSET Refrigeration Equipment BSC6900 Number of a simple cell broadcast message. You can run "DSP ADD GSMSCB" to query and obtain the GSMSCB(Ma information. ndatory) The value of this the refrigeration Whether to start parameter cannot equipment of the BTS. SET In multi-mode scenario, the value BTSOUTPUT( of this parameter in this mode must Optional) be the same as the value of the COL SYNCINFO(M andatory) SET GCELLPWRB ASIC(Optional ) COLTYPE Collection Type BSC6900 Whether to collect offset information by the BTS or cell. COMBINERLOSS Combiner Loss BSC6900 COMMACC Common Access Control Class BSC6900 Combined loss used to estimate the downlink power during assignment Level of common access control, SET used for load control, allowing or GCELLCCBA forbidding the access of some SIC(Optional) users of common access levels SET PWDPOLICY( Optional) Complexity of the password SET BTSBWPARA (Optional) BTS compress rate. ADD GEXT2GCEL L(Optional) ADD BTSABISHDL CPATH(Mand atory) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) Whether the BSC that controls the external cell and the local BSC belong to the same MSC Complicacy Password Complexity BTS Transfer Compression Rate BSC6900 COMPRS BSC6900 COMSC Co-MSC BSC6900 CONBSCBTSIDTYP Connect BSC E BTS Index Type Recover threshold of queue 0 [ms] Recover threshold of queue 1 [ms] Recover threshold of queue 2 [ms] BSC6900 CONGCLRTHD0 BSC6900 CONGCLRTHD1 BSC6900 CONGCLRTHD2 BSC6900 Index type of the BTS connect to BSC If the duration for buffering the data in queue 0 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 1 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 2 is less than or equals to the value of this parameter, flow control is canceled. CONGCLRTHD3 Recover threshold of queue 3 [ms] Recover threshold of queue 4 [ms] Recover threshold of queue 5 [ms] Congestion threshold of queue 0 [ms] Congestion threshold of queue 1 [ms] Congestion threshold of queue 2 [ms] Congestion threshold of queue 3 [ms] Congestion threshold of queue 4 [ms] Congestion threshold of queue 5 [ms] Concentric Circles HO Allowed BSC6900 CONGCLRTHD4 BSC6900 CONGCLRTHD5 BSC6900 CONGTHD0 BSC6900 CONGTHD1 BSC6900 CONGTHD2 BSC6900 CONGTHD3 BSC6900 CONGTHD4 BSC6900 CONGTHD5 BSC6900 ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) CONHOEN BSC6900 If the duration for buffering the data in queue 3 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 4 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 5 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 0 is more than or equals to the value of this parameter, flow control is triggered. If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, flow control is triggered. If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, flow control is triggered. If the duration for buffering the data in queue 3 is more than or equals to or equals to the value of this parameter, flow control is triggered. If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, flow control is triggered. If the duration for buffering the data in queue 5 is more than or equals to the value of this parameter, flow control is to enable the concentric Whether triggered. cell handover algorithm. The SET concentric cell handover helps to GCELLHOBA achieve wide coverage in the SIC(Optional) underlaid subcell and aggressive ADD Number of the port through which DXXCONNEC the DXX is connected to the T(Mandatory) BSC6900 ADD SUBRACK(Op Whether to connect the power tional) monitoring board CONNECTPORTNO Connect Port No. BSC6900 CONNPWR Connect power monitoring board BSC6900 CONNTYPE Connection Type BSC6900 CONNTYPE Connection Type BSC6900 CONTHOMININTV Min Interval for Consecutive Hos BSC6900 Interval for Consecutive HO Jud. CONTINTV BSC6900 CONTPING Continue ping or not BSC6900 Count Send PKT Count BSC6900 CPS Allow Dynamic Shutdown TRX BSC6900 Type of the connection between the NE and EMS or LMT. The SET connection can be a plain CONNTYPE( connection or SSL encryption Mandatory) connection. Whether the Iur-g common ADD connection is established between GIURGCONN the BSC and a co-BSC6900 RNC (Mandatory) or an external RNC. Minimum interval between the two consecutive handover decisions of SET an MS. The BSC cannot make a GCELLHOCT handover decision during the RL(Optional) minimum interval. The twice intra-cell handover SET events during this interval are GCELLHOAD( considered consecutive handover Optional) events. to perform the PING Whether operation continuously. When the continuous PING operation is PING performed, the system sends the IP(Optional) PING packets to the specified IP PING MAC(Optional ) PING BTSCFM(Opti Transmitted packets This parameter specifies whether SET to allow the BSC6900 to enable or GTRXDEV(Op disable the power amplifier of a tional) TRX based on the traffic volume. ADD GCBSADDR( Mandatory) CPU number on a board SET BTSCRC4(Ma ndatory) SET GCELLIDLEB ASIC(Optional ) CPUN CPU NO BSC6900 CRC4CHK CRC4 Check Switch Cell Reselect Hysteresis Parameters Certificate Revocation List File Name Certificate Revocation List File State BSC6900 CRH BSC6900 Whether to enable to the BTS to support CRC4 check Cell reselection hysteresis. This is one of the parameters used for deciding whether to reselect cells in different location areas. This parameter can avoid the increase CRL BSC6900 CRLEnableSta BSC6900 SET CERTFILE(Ma Name of the certificate revocation ndatory) list file to enable the certificate Whether revocation list SET DISABLE: indicating that the CERTFILE(Op certificate revocation list is disabled tional) ENABLE: indicating that the CRMSGRESENDIN Channel Release T Resend Interval BSC6900 SET GCELLGSMR Time interval for the BTS resending (Optional) a channel release message SET GCELLGSMR (Optional) SET GCELLIDLEB ASIC(Optional ) Number of times of the BTS resending a channel release message Cell Reselect Offset (CRO), indicating a correction of the C2. Proper setting of this parameter can reduce the number of handover times, helpful for Threshold of the time for crosstalk detection. Within the threshold, if SET the call flag continuously appearing BSCBASIC(O in the code stream is different from ptional) the one saved in a whether the(TC) The field indicates transcoder cross-connect path is available. ADD When the cross-path is available, a SCTPLNK(Opt maximum of four IP paths exists. ional) The four IP paths are the IP path ADD TRMFACTOR GSM CS data service downlink (Optional) factor ADD TRMMAP(Opti onal) CS data path ADD TRMMAP(Opti onal) CS data priority ADD TRMFACTOR (Optional) GSM CS dataCS data uplink factor Priority of the service service. The parameter is used for BSC6900 ADD flow control. GCELL(Option The smaller the value of this al) parameter,for starting LAPD link Threshold the higher the priority. congestion control. This parameter SET cannot be set too high. If this GTRXFC(Opti parameter is set too high, the onal) signaling link may be congested ADD TRMFACTOR GSM CS voice service downlink (Optional) factor CRMSGRESENDNU Channel Release M Resend Number BSC6900 CRO Cell Reselect Offset BSC6900 CROCALTMTHRD Cross Call Detect Time Threshold BSC6900 CROSSIPFLAG Cross IP address available flag BSC6900 GSM CS data service downlink factor BSC6900 CSDATADL CSDATAPATH CS data path BSC6900 CSDATAPRI CS data priority GSM CS data service uplink factor BSC6900 CSDATAUL BSC6900 CSDSP CS Data Service PRI BSC6900 CSTARTTHD Congestion Start Threshold BSC6900 GSM CS voice service downlink factor BSC6900 CSVOICEDL CSVOICEPATH CS voice path BSC6900 ADD TRMMAP(Opti onal) CS voice path ADD TRMMAP(Opti onal) CS voice priority ADD TRMFACTOR (Optional) GSM CS voice service uplink factor Priority of a speech service in the CS domain. The parameter is used ADD for BSC6900 flow control. GCELL(Option The smaller the value of this al) parameter, the higher the priority. SET SLFSLVSW(O Self-healing switch for the Ethernet ptional) adapter traffic monitoring Timer alignment ready. This parameter only applies to the 64 ADD kbit/s links. For the 2 Mbit/s links, MTP3LNK(Opt the value of this timer is always ional) 150000. Timer not aligned. This parameter ADD only applies to the 64 kbit/s links. MTP3LNK(Opt For the 2 Mbit/s links, the value of ional) this timer is always 130000. Timer aligned. This parameter only ADD applies to the 64 kbit/s links. For MTP3LNK(Opt the 2 Mbit/s links, the value of this ional) timer is always 1000. Timer emergency proving. This parameter only applies to the 64 ADD kbit/s links. For the 2 Mbit/s links, MTP3LNK(Opt the value of this timer is always ional) 500. normal proving. This Timer parameter only applies to the 64 ADD kbit/s links. For the 2 Mbit/s links, MTP3LNK(Opt the value of this timer is always ional) 30000. Timer sending SIB. This parameter ADD only applies to the 64 kbit/s links. MTP3LNK(Opt For the 2 Mbit/s links, the value of ional) this timer is always 100. This Timer remote congestion. parameter only applies to the 64 ADD kbit/s links. For the 2 Mbit/s links, MTP3LNK(Opt the value of this timer is always ional) 5000. CSVOICEPRI CS voice priority GSM CS voice service uplink factor BSC6900 CSVOICEUL BSC6900 CSVSP CSW CS Voice Service PRI BSC6900 Self-healing Switch for Ethernet Adapter Traffic Monitoring BSC6900 CT1 Timer alignment ready BSC6900 CT2 Timer not aligned BSC6900 CT3 Timer aligned BSC6900 CT4E Timer emergency proving BSC6900 CT4N Timer normal proving BSC6900 CT5 Timer sending SIB BSC6900 CT6 Timer remote congestion BSC6900 CT7 Timer excessive delay of acknowledgemen t BSC6900 CT9 Timer interval of resending FISU BSC6900 CTHD Critical threshold BSC6900 CTHD Critical threshold BSC6900 Timer excessive delay acknowledgement. This parameter ADD only applies to the 64 kbit/s links. MTP3LNK(Opt For the 2 Mbit/s links, the value of ional) this timer is always 2000. FISU. Timer interval of resending This parameter only applies to the ADD 64 kbit/s links. For the 2 Mbit/s MTP3LNK(Opt links, the value of this timer is ional) always 10. Critical threshold of CPU usage. When the CPU usage in "Fast SET judgement window" reaches or FCCPUTHD( exceeds the threshold, all active Optional) flow control functions are queue Critical threshold of packet usage. When the packet queue SET usage reaches or exceeds the FCMSGQTHD threshold, all active flow control (Optional) functions are implemented. ADD AISSCFG(Ma ndatory) DPC of of the control acknowledge Format the control BSC message of the MS. Four access SET bursts are used to obtain timing GCELLPSBA advance without sending polling SE(Optional) message; RLC/MAC control block SET BTSLOADCT RL(Mandatory ) Control Flag ADD BTSRETANT( Number of the cabinet which Mandatory) controls RET antenna. antenna. ControlPort No. of RET The number of RET antenna which ADD connect to same feed tributary BTSRETANT( cannot more than 6.For GATM Mandatory) boards, thethe slot where the board Number of valid value ranges from controlling the RET antenna is ADD located. For SingleRAN BTSs, the BTSRETANT( valid value ranges from 0 to 5. For Mandatory) non-SingleRAN BTSs, the valid ADD BTSRETANT( Number of the subrack where the Mandatory) BTS board is located ADD Slot number of the MPU RSCGRP(Man Subsystem for the centralized datory) management of the resources CTRBSCDPC Control BSC DPC BSC6900 Control Acknowledge Type CTRLACKTYPE BSC6900 CTRLFLAG Control Flag BSC6900 CTRLPORTCN Control Port Cabinet No. BSC6900 CTRLPORTNO Control Port No. BSC6900 CTRLPORTSN Control Port Slot No. BSC6900 CTRLPORTSRN Control Port Subrack No. BSC6900 CTRLSLOT Slot No. BSC6900 CTRLSN Control Plane Slot No. BSC6900 SET Number of the BSC6900 slot where BTSCTRL(Ma the XPU of the control plane is ndatory) located SET Number of the BSC6900 subrack BTSCTRL(Ma where the XPU of the control plane ndatory) is located Configuration rollback control SET switch that is used to specify CMCTRLSW( whether to support the Mandatory) configuration rollback function. SET MSGSOFTPA RA(Optional) SET BTSAUTODL DACTINFO(M andatory) SET GCELLHOFIT PEN(Optional) SET GCELLHOFIT PEN(Optional) SET GCELLOTHE XT(Optional) CTRLSRN Control Plane Subrack No. BSC6900 CTRLSW CM Control Enable Switch BSC6900 HO_RQD Current CurChannelInHoRqd Channel BSC6900 Whether an HO_RQD message contains the Current Channel CVer C-Version No. BSC6900 DATAQUAFLTLEN Filter Length for TCH Qual BSC6900 DATASTRFLTLEN Filter Length for TCH Level BSC6900 DATATRAFFSET Data Service Allowed BSC6900 C-version number of the BTS software of measurement reports Number sampled for averaging the signal quality on a speech/data channel. Averaging the signal quality in multiple measurement reports Number of measurement reports sampled for averaging the signal strength on a speech/data channel. Averaging the signal strength in multiple measurement reports Data service supported by the BSC6900. You can set this parameter according to actual requirements. DATE Date Limit BSC6900 ADD OP(Optional) SET TIME(Optional ) ADD BSCDSTPAD ATE(Mandator y) SET BTSAUTODL DACTINFO(M andatory) Whether to limit the operation date of the operator DATE DateRangeIndex Date Prohib DynShutdown TRX DateRangeIdx BSC6900 BSC6900 Date Unique number of the date range during which to disable the BSC from shutting down the TRX dynamically Day Day BSC6900 Date when the TMU board software is released DBD Dead Band BCCH IUO of Double Frequency Cell BSC6900 DBFREQBCCHIUO BSC6900 Temperature error allowed when the temperature control system SET adjusts the temperature. BTSDHEUBP( In multi-mode scenario, the value Optional) of this parameter in one mode Whether the primary BCCH is ADD configured on the inner or extra GCELL(Mand part of an intelligent underlayatory) overlay (IUO) cell ADD GCELL(Mand Index of a same group cell in an atory) enhanced dual band network ADD GCELL(Mand Name of a same group cell in an atory) enhanced dual band network ADD GCELL(Mand Index type of a same group cell in atory) an enhanced dual band network SET BTSALMPOR T(Mandatory) DC Lowvoltage Alarm Cabinet No. SET BTSALMPOR T(Mandatory) DC Lowvoltage Alarm Port No. SET BTSALMPOR T(Mandatory) DC Lowvoltage Alarm Slot No. SET BTSALMPOR T(Mandatory) DC Lowvoltage Alarm Subrack No. voltage alarm lower threshold. When the busbar output voltage is SET lower than the value of this BTSAPMUBP( parameter, an alarm indicating the Optional) abnormal reports an alarm if the DC The BTS busbar voltage is voltage exceeds the value of this SET parameter. BTSDPMUBP( In multi-mode scenario, the value Optional) of this parameter an one mode DC The BTS reports in alarm if the voltage is lower than the value of SET this parameter. BTSDPMUBP( In multi-mode scenario, the value Optional) of this parameter in one mode DBLFREQADJCID Same Group Cell Index BSC6900 DBLFREQADJCNA ME Same Group Cell Name BSC6900 DBLFREQADJIDTY Same Group Cell PE Index Type BSC6900 DC Low Voltage Alarm Cabinet No. DCLACN BSC6900 DCLAPN DC Low Voltage Alarm Port No. BSC6900 DCLASN DC Low Voltage Alarm Slot No. DC Low Voltage Alarm Subrack No. BSC6900 DCLASRN BSC6900 DCVLTHD DC Voltage Lower Threshold BSC6900 DCVOLALARMH DC Overvoltage Alarm Threshold BSC6900 DC Under Voltage Alarm Threshold DCVOLALARML BSC6900 DCVUTHD DC Voltage Upper Threshold BSC6900 Number of DefaultDynPdchPreT Dynamic Channel ranNum Pre-Converted BSC6900 DELAYSENDRFCH REL T3111 BSC6900 DENO Destination entity No. BSC6900 DC voltage alarm upper threshold. When the busbar output voltage is SET higher than the value of this BTSAPMUBP( parameter, an alarm indicating the Optional) abnormal busbar voltage the This parameter specifies is default pre-converted PDCHs in SET the dynamic transferable channel GCELLPSCH pool. M(Optional) When for delaying a connection Timer this parameter is greater release. This parameter is used for SET delaying the channel deactivation GCELLTMR( after the active signaling link is Optional) broken. The purpose is to reserve ADD M3DE(Mandat ory) The destination entity number ADD uniquely identifies a destination M3RT(Mandat entity. DESC Description BSC6900 ADD OP(Optional) DESTEALSET Anti-theft Equipment BSC6900 Description start the anti-theft Whether to of the operator account equipment of the BTS. SET In multi-mode scenario, the value BTSOUTPUT( of this parameter in this mode must Optional) be the same as the value of the DESTIP Destination IP address BSC6900 PING IP(Mandatory) Destination IP address TRC IPADDR(Man datory) Destination IP address ADD IPRTBIND(Ma ndatory) PING MAC(Mandato ry) TRC MAC(Mandato ADD BTSAUTOPL AN(Mandatory ) DESTIP Destination IP address BSC6900 DESTIP Destination IP address BSC6900 Destination IP address DESTMEPID RMEP ID BSC6900 Identifies a maintenance point in the maintenance group DESTNODE Transport Link Type BSC6900 Type of the object the BTS is connected to DESTNODE Dest Node Type BSC6900 ADD Type of the object the BTS is BTSCONNEC connected to. Value range: BTS, T(Mandatory) BSC6900, and DXX DESTSN Peer Slot No. BSC6900 DESTSRN Peer Subrack No. BSC6900 DESTSSN Peer Subsystem No. BSC6900 Slot No. of the subsystem where ADD the Iur-g common connection is GIURGCONN established to the co-BSC6900 (Mandatory) RNC Subrack No. of the subsystem ADD where the Iur-g common GIURGCONN connection is established to the co(Mandatory) BSC6900 RNC No. of the subsystem where the IurADD g common connection is GIURGCONN established to the co-BSC6900 (Mandatory) RNC MOV BCCH(Mandat ID of the TRX that carries the ory) destination sending test TRAU Interval for main BCCH frames in the period of class-2 SET mute detection.Test TRAU frame is GCELLSOFT( sent at the specified interval till the Optional) peer end respondsof periods in of Maximum number or the timer which the local end does not ADD receive BFD packets from the peer BTSBFD(Opti end. If the number of periods in onal) which the local end does not SET BTSABISTRO P(Mandatory) Switch for Abis Timeslot Detection ADD BTSRETANT( Mandatory) Name of the RET antenna ADD BTSRETANT( Mandatory) Number of the RET antenna. ADD PPPLNK(Man datory) ADD Device IP address of the interface MPGRP(Mand board used by the PPP link. ADD DEVIP(Manda tory) Device IP Address Type ADD GEXT3GCEL L(Mandatory) SET Downlink frequency of the external GCELLHOFD 3G cell DESTTRXID Destination Main BCCH TRX ID BSC6900 Period of Mute DETECTFRAMEPE Detect Class2 RIOD TRAU Frame BSC6900 DETECTMULT Detect Period Switch for Abis Timeslot Detection BSC6900 DETECTSWITCH BSC6900 DEVICENAME Deviced Name BSC6900 DEVICENO Device No. BSC6900 DEVIP Borrowed device IP address BSC6900 DEVTYPE Device IP Address Type BSC6900 DF DL UARFCN BSC6900 DFCBSN DFCB Board SN BSC6900 SET BTSDFCUBP( Number of the slot where the Optional) DFCB is installed SET BTSDFCUBP( Number of the subrack where the Optional) DFCB is installedcorresponds to The default DPC the CN of the primary operator. ADD When only one DPC is configured, GCNNODE(O this parameter must be set to ptional) "YES", indicating that all the calls Whether to use the customized port SET DEFAULTPORT: indicating that the FTPSSRV(Ma FTP server uses the default port 21 ndatory) as a command port and port 20 as DFCBSRN DFCB Board SRN BSC6900 DFDPC Default DPC BSC6900 DFTPORTSWT The Type of FTP Server Command Port BSC6900 DGPSPERIOD DGPS data report period[min] BSC6900 ADD Period for reporting differential GPS(Optional) GPS data ADD DHCPRLY(Ma This parameter indicates the IP ndatory) Address of DHCP Relay Gateway. ADD DHCPRLY(Ma ndatory) DHCP Relay ID SET BTSDPMUBP( Optional) SET GCELLCHMG BASIC(Option al) DHCP Relay DHCPRLYGATEWA Gateway IP YIP Address BSC6900 DHCPRLYID DHCP Relay ID BSC6900 DIESELENGINESAV Diesel Engine ESWITCH Save Switch Different Band DIFFBANDSDCCHU SDCCH Using SINGOPTIMIZE Optimize BSC6900 BSC6900 Whether to enable the diesel engine saveallow an MS to report Whether to switch the classmark and whether to hand over the MS from the SDCCH in the frequency band for the main BCCH to the SDCCH in a different DINM Date in Month BSC6900 ADD SUBTSK(Man Day in the month on which the datory) command can be executed. ADD SUBTSK(Man datory) DLD LICENSE(Man datory) ULD LICENSE(Man DINW Date in Week BSC6900 Day in the week on which the command can be executed. The relative path in the working path of the FTP user in the FTP server DIR Directory BSC6900 DIR File Directory BSC6900 Directed Retry DirectedRetryAssFail AssFail Send SendEnable Enable BSC6900 DIRECTRYEN Directed Retry BSC6900 DIRMAGANSITEFL AG Directly Magnifier BTS Flag BSC6900 Disconnect DisconnectHandover Handover Protect ProtectTimer Timer BSC6900 DIVERSITY Diversity BSC6900 Diversity DIVERT16QAMDEL Transmitter AY 16QAM Delay Diversity DIVERT32QAMDEL Transmitter AY 32QAM Delay BSC6900 BSC6900 Diversity DIVERT8PSKDELA Transmitter 8PSK Y Delay BSC6900 DLD RETANTCFG( Optional) DLD Directory of the software to be BTSPATCH(O downloaded BSC sends an Whether the Assignment Fail message with the SET cause value of directed retry to the AITFOTHPAR MSC before the BSC initiates a A(Optional) directed retry procedure Whether to enable a directed retry. SET The directed retry is to hand over GCELLBASIC an MS to a neighboring cell in the PARA(Optiona same procedure as the handover. l) The directed retryais an emergency Whether a cell is repeater. With simpler functions than a BTS, a SET repeater is a coverage extension GCELLSOFT( device of a BTS. It is applied to Optional) widely-stretched the duration in Timer to control areas or indoor which the BSC prevents the SET handover of an MS from which the OTHSOFTPA BSC receives the Disconnect RA(Optional) message. If the MS is handed over ADD GEXT3GCEL L(Mandatory) Whether to activate transmit SET diversity on the common channel of GCELLHOFD a 3G celltransmit diversity when Delay of SET 16QAM is used. Generally, the GCELLBASIC parameter is applicable to general PARA(Optiona fading environments. The transmit l) diversity can generally bring a gain Delay of transmit diversity when SET 32QAM is used. Generally, the GCELLBASIC parameter is applicable to general PARA(Optiona fading environments. The transmit l) diversity can generally bring a gain Delay of transmit diversity when SET 8PSK is used. Generally, the GCELLBASIC parameter is applicable to general PARA(Optiona fading environments. The transmit l) diversity can generally bring a gain SET BTSRXUBP(O Whether to support transmitting ptional) diversity or four diversity receiving SET Minimum interval between two GCELLPWR3( consecutive downlink power control Optional) commands If the downlink receive quality level of an AMR full rate call is greater SET than this parameter, the call needs GCELLPWR3( to undergo Huawei power control Optional) generation III. DivSwitch Four Diversity Receiver BSC6900 DLADJPRD PwrCtrlDLAdjPeri od BSC6900 DLAFSREXQUALHI DLAFSRexQualH GHTHRED ighThred BSC6900 DLAFSREXQUALLO DLAFSRexQualL WTHRED owThred BSC6900 SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) ADD NSVC(Mandat ory) SET BSCPSSOFT PARA(Optiona l) DLAHSREXQUALHI DLAHSRexQual GHTHRED HighThred BSC6900 DLAHSREXQUALL OWTHRED DLAHSRexQualL owThred BSC6900 The Identifier of Data Link Connection DLCI BSC6900 Fast DL Priority DLCOEFFICIENTTS Decision RAPIDADJ Threshold BSC6900 If the downlink receive quality level of an AMR full rate call is smaller than this parameter, the call needs to undergo Huawei power control generation III. receive quality level If the downlink of an AMR half rate call is greater than this parameter, the call needs to undergo Huawei power control generation III. receive quality level If the downlink of an AMR half rate call is smaller than this parameter, the call needs to undergo Huawei power control generation III. link connection of the ID of the data NSVC. It is an interworking parameter which must be consistent on the BSC and the peer. ratio of downlink flux to uplink If the flux is greater than or equal to the threshold during the fast flux measurement, the downlink services takes priority. DLDCSPT Support Downlink Dual-Carrier BSC6900 Edge HO DL RX_LEV Threshold DLEDGETHRES BSC6900 III DL Filter DLFILTADJFACTOR Adjust Factor BSC6900 DLFSREXQUALHIG DLFSRexQualHi HTHRED ghThred BSC6900 DLFSREXQUALLO WTHRED DLFSRexQualLo wThred BSC6900 Downlink GPRS TBF Window Expansion DlGprsTbfExpandOp Optimization BSC6900 DLHSREXQUALHIG DLHSRexQualHi HTHRED ghThred BSC6900 SET GCELLGPRS( Optional) Whether the cell supports DLDC Threshold for downlink edge handover. If the downlink receive SET level remains less than this GCELLHOBA threshold for a period of time, the SIC(Optional) edge adjustment factor for If the Filter handover is triggered. downlink power control. Setting this SET parameter high helps to smooth the GCELLPWR3( filtered values and to reduce the Optional) impact quality threshold for Huawei Upper of poor measurement power control generation III on a SET full rate call. If the downlink receive GCELLPWR3( quality level of a full rate call is Optional) greaterquality threshold for Huawei Lower than this threshold, the call power control generation III on a SET full rate call. If the downlink receive GCELLPWR3( quality level of a full rate call is Optional) smaller than this threshold, the call Expanded size of the GPRS RLC SET window. This parameter is used to GCELLPSOT expand the size of the GRPS RLC HERPARA(Op window. The expanded window tional) size breaks the restrictions Huawei Upper quality threshold for of 64 power control generation III on a SET half rate call. If the downlink GCELLPWR3( receive quality level of a half rate Optional) call is greater than this threshold, DLHSREXQUALLO WTHRED DLHSRexQualLo wThred BSC6900 SET GCELLPWR3( Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCHMG AD(Optional) DLHYSTF1 AMR DL Coding Rate adj.hyst1[F] BSC6900 DLHYSTF2 AMR DL Coding Rate adj.hyst2[F] BSC6900 DLHYSTF3 AMR DL Coding Rate adj.hyst3[F] BSC6900 DLHYSTH1 AMR DL Coding Rate adj.hyst1[H] BSC6900 DLHYSTH2 AMR DL Coding Rate adj.hyst2[H] BSC6900 DLHYSTH3 AMR DL Coding Rate adj.hyst3[H] BSC6900 AMR DL Coding Rate adj.hyst1[WB] AMR DL Coding Rate adj.hyst2[WB] DLHYSTWB1 BSC6900 DLHYSTWB2 BSC6900 Interf.of DL Level DLINTERFLEVLIMIT Threshold BSC6900 DLINTERFQUALLIM Interf.of DL IT Qual.Threshold BSC6900 DlLdrThrd2GCell 2G Cell DL Basic Congest Thred BSC6900 SET GCELLCHMG AD(Optional) SET GCELLHOINT ERRATLDB(O Threshold of downlink Basic ptional) Congestion state in a 2G Cell Lower quality threshold for Huawei power control generation III on a half rate call. If the downlink receive quality level of a half rate call is smallter than this threshold, Adjustment hysteresis 1 of AMR downlink coding rate (full rate). According to a certain algorithm and the radio quality indication (RQI) in the hysteresis 2 of AMR Adjustment call measurement downlink coding rate (full rate). According to a certain algorithm and the radio quality indication (RQI) in the hysteresis 3 of AMR Adjustment call measurement downlink coding rate (full rate). According to a certain algorithm and the radio quality indication (RQI) in the hysteresis 1 of AMR Adjustment call measurement downlink coding rate (half rate). According to a certain algorithm and the radio quality indication (RQI) in the hysteresis 2 of AMR Adjustment call measurement downlink coding rate (half rate). According to a certain algorithm and the radio quality indication (RQI) in the hysteresis 3 of AMR Adjustment call measurement downlink coding rate (half rate). According to a certain algorithm and the radio quality indication (RQI) in the hysteresis 1 of AMR Adjustment call measurement downlink coding rate (wide band). According to a certain algorithm and the radio quality indication (RQI) in the hysteresis 2 of AMR Adjustment call measurement downlink coding rate (wide band). According to a certain algorithm and the radio quality indication (RQI) in the call measurement Threshold for determining whether downlink interference exists. If the downlink level is equal to or greater than "Interf.of DL Level Threshold" and the downlink quality level is Threshold for determining whether downlink interference exists. If the downlink level is equal to or greater than "Interf.of DL Level Threshold" and the downlink quality level is DLLEVFILTLEN Filter Length for DL RX_LEV Downlink Longterm FER Lower Threshold BSC6900 SET GCELLPWR2( Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) DLLTFERLOWTH BSC6900 DLLTFERTGT Downlink Longterm FER Target BSC6900 Downlink Longterm FER Upper Threshold BSC6900 Downlink Threshold Adjust Factor BSC6900 DLLTFERUPTH DLLTTHADJFA Number of measurement reports sampled for averaging downlink signal strength. A single measurement report may not reflect voice quality threshold Lower the actual network situations associated with the automatic adjustment of the AMR downlink handover threshold. The value of this parameter must be smaller Target value of the voice quality automatically adjusted through the downlink threshold of AMR handover Upper voice quality threshold associated with the automatic adjustment of the AMR handover downlink threshold.threshold Factor of downlink adjustment. It indicates the linear relation between the threshold adjustment value and the logarithmic FER. DLMAXDownSte DLMAXDOWNSTEP p BSC6900 SET Maximum step by which to GCELLPWR3( decrease downlink power Optional) according to signal strength SET GCELLPWR3( Optional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLPWR2( Optional) SET GCELLPWRB ASIC(Optional ) SET GCELLPWRB ASIC(Optional ) SET GCELLPWR2( Optional) Maximum step by which to increase downlink power according to signal strength DLMAXUPSTEP DLMAXUpStep 2G Cell DL Overload Congest Thred BSC6900 DlOlcThrd2GCell BSC6900 DLPREDLEND DL MR. Number Predicted BSC6900 DLQHIGHTHRED DL Qual. Upper Threshold BSC6900 DLQLOWTHRED DL Qual. Lower Threshold BSC6900 DLQUAFILTLEN Filter Length for DL Qual. BSC6900 Threshold of downlink overload congestion downlink measurement Number of state in a 2G Cell reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a power control command. Thus, the BSC Quality level threshold for decreasing downlink signal power. If the BTS transmits signals at a quality level less than this threshold, the BSC decreases the Quality level threshold for increasing downlink signal power. If the BTS transmits signals at a quality level greater than this threshold, the BSC increases the Number of measurement reports sampled for averaging downlink signal quality. A single measurement report may not reflect the actual network situations DLQUALBADTRIG DL Qual. Bad Trig Threshold BSC6900 SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLHOEM G(Optional) SET GCELLAMRQ UL(Optional) SET GCELLAMRQ UL(Optional) DL Qual. Bad DLQUALBADUPLEV UpLEVDiff BSC6900 DLQUALIMIT DL Qual. Threshold BSC6900 DLQUALIMITAMRF DL Qual. Limit for R AMR FR BSC6900 DLQUALIMITAMRH DL Qual. Limit for R AMR HR BSC6900 During downlink power control, if the downlink receive quality level is equal to or greater than "DL Qual, bad Trig Threshold", "DL RX_LEV Upper Threshold" is increased by During downlink power control, if the downlink receive quality level is equal to or greater than "DL Qual, bad Trig Threshold", "DL RX_LEV Upper Threshold" is increased by Downlink quality threshold for emergency handover. This parameter is represented as the product of 10 and a quality level that ranges from limit forThe Downlink quality 0 to 7. emergency handover in an AMR full rate call. The value of this parameter corresponds to the quality levels (0 to 7) multiplied by Downlink quality limit for emergency handover in an AMR half rate call. The value of this parameter corresponds to the quality levels (0 to 7) multiplied by DLREXLEVADJFCT DLRexLevAdjust R Factor BSC6900 DLREXLEVEXPFLT DLRexLevExpon LEN entFilterLen BSC6900 DLREXLEVHIGHTH DLRexLevHighTh RED red BSC6900 DLREXLEVLOWTH DLRexLevLowthr RED ed BSC6900 DLREXLEVSLDWIN DLRexLevSlideW DOW indow BSC6900 SET Percentage of signal strength in the GCELLPWR3( factors by which to determine the Optional) downlink power control step for Length of the exponential filter downlink signal strength. A single SET measurement report may not GCELLPWR3( reflect the actual network situations Optional) accurately. Therefore, the BSC Upper receive level threshold for downlink power control. If the SET downlink receive level is greater GCELLPWR3( than this threshold, the power of Optional) the downlink signal needs to be Lower receive level threshold for downlink power control. If the SET downlink receive level is smaller GCELLPWR3( than this threshold, the power of Optional) the uplink the slide window filter for Length of signal needs to be downlink signal strength. A single SET measurement report may not GCELLPWR3( reflect the actual network situations Optional) accurately. Therefore, the BSC SET Percentage of quality level in the GCELLPWR3( factors by which to determine the Optional) downlink power control step for Length of the exponential filter downlink signal quality. A single SET measurement report may not GCELLPWR3( reflect the actual network situations Optional) accurately. Therefore, the BSC DLREXQUALADJFC DLRexQualAdjus TR tFactor BSC6900 DLREXQUALEXPFL DLRexQualExpo TLEN nentFilterLen BSC6900 DLREXQUALSLDWI DLRexQualSlide NDOW Window BSC6900 SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWRB ASIC(Optional ) SET GCELLPWRB ASIC(Optional ) SET GCELLPRIVA TEOPTPARA( Optional) DLRXLEVPROTECT III DL RexLev FACTOR Protect Factor BSC6900 DLRXQUALPROTE III DL RexQual CTFACTOR Protect Factor BSC6900 DLSSHIGHTHRED DL RX_LEV Upper Threshold BSC6900 DLSSLOWTHRED DL RX_LEV Lower Threshold BSC6900 Downlink TBF Establishment Delay DLTBFESTDELAY BSC6900 Length of the slide window filter for downlink signal quality. A single measurement report may not reflect the actual network situations accurately. Therefore, the BSC A power control step cannot exceed the step computed according to "III DL RexLev Protect Factor" and "III DL RexQual Protect Factor". control step cannot A power exceed the step computed according to "III DL RexLev Protect Factor" and "III DL RexQual Protect Factor". Upper threshold for downlink signal strength If the downlink received signal level is greater than this threshold, a power decrease forcomputed.signal Lower threshold is downlink strength If the downlink received signal level is less than this threshold, a power increase is computed. Then, the Time interval between sending of the Packet Uplink Ack/Nack message and setup of the DL TBF. After receiving the Packet Uplink Ack/Nack message (FAI = 1), the DLTESTRESENDIN Download Test T Resend Interval BSC6900 DLTESTRESENDN UM Download Test Resend Number BSC6900 DLTHF1 AMR DL Coding Rate adj.th1[F] BSC6900 DLTHF2 AMR DL Coding Rate adj.th2[F] BSC6900 DLTHF3 AMR DL Coding Rate adj.th3[F] BSC6900 DLTHH1 AMR DL Coding Rate adj.th1[H] BSC6900 SET GCELLGSMR Interval for resending downlink test (Optional) messages times of the BSC6900 Number of resending downlink test messages SET after the downlink test function is GCELLGSMR enabled. If the BSC6900 does not (Optional) receive any threshold 1 of AMR Adjustment response message downlink coding rate (full rate). SET According to a certain algorithm GCELLCCAM and the RQI in the call R(Optional) measurement report, the MS and Adjustment threshold 2 of AMR downlink coding rate (full rate). SET According to a certain algorithm GCELLCCAM and the RQI in the call R(Optional) measurement report, the MS and Adjustment threshold 3 of AMR downlink coding rate (full rate). The SET adjustment thresholds and the GCELLCCAM hysteresis of coding rate must R(Optional) meet the following conditions: AMR Adjustment threshold 1 of AMR downlink coding rate (half rate). SET According to a certain algorithm GCELLCCAM and the RQI in the call R(Optional) measurement report, the MS and DLTHH2 AMR DL Coding Rate adj.th2[H] BSC6900 SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) ADD BTSANTFEE DERBRD(Opti onal) SET ADD BTSANTFEE DERBRD(Opti onal) SET SET BTSIPCLKPA RA(Mandatory ) SET GCELLPSCS( Optional) SET GCELLEGPR SPARA(Optio nal) SET GCELLEGPR SPARA(Optio nal) SET GCELLEGPR SPARA(Optio nal) SET GCELLPSCS( Optional) DLTHH3 AMR DL Coding Rate adj.th3[H] BSC6900 DLTHWB1 AMR DL Coding Rate adj.th1[WB] BSC6900 DLTHWB2 AMR DL Coding Rate adj.th2[WB] BSC6900 Adjustment threshold 2 of AMR downlink coding rate (half rate). According to a certain algorithm and the RQI in the call measurement report, the MS and Adjustment threshold 3 of AMR downlink coding rate (half rate). According to a certain algorithm and the RQI in the call measurement report, the MS and Adjustment threshold 1 of AMR downlink coding rate (wide band). According to a certain algorithm and the RQI in the call measurement report, the MS and Adjustment threshold 2 of AMR downlink coding rate (wide band). According to a certain algorithm and the RQI in the call measurement report, the MS and MDU board number when the antenna pass of downlink tributary A is selected MDU board number when the antenna pass of downlink tributary B is selected Clock domain required by the slave side in the 1588V2 protocol. This parameter is valid when the 1588CLK type isof the default Coding scheme configured. GPRS downlink. Dynamic adjustment coding: the coding scheme used during initial access transmission. Ifscheme of theuses Default coding the downlink downlink EDGE link. If the downlink adopts the dynamic adjustment coding scheme, this parameter can be usedcoding the coding scheme Default to set scheme used on the downlink EGPRS2-A link. If the downlink uses the dynamic coding scheme, this parameter specifies the coding scheme that is used for Fixed coding scheme that is used on the downlink EGPRS2-A link. If the downlink uses the fixed coding scheme, this parameter can be set MSC1-4, MSC7-8 of the downlink Adjustment mode or DAS5-12.. If GPRS link coding scheme. If the fixed coding scheme is used, this parameter is set to a value ranging from CS1 to CS4. If the dynamic DMDUA Down MDU A BSC6900 DMDUB Down MDU B BSC6900 DN Domain BSC6900 DNDEFAULTCS Downlink Default CS Type BSC6900 DNDEFAULTMCS DNE2ADEFAULTM CS Downlink Default MCS Type BSC6900 Downlink EGPRS2-A Default MCS Type BSC6900 Downlink EGPRS2-A Fixed MCS Type BSC6900 DNE2AFIXMCS DNFIXCS Downlink Fixed CS Type BSC6900 DNFIXMCS Downlink Fixed MCS Type BSC6900 DNPCEN DL PC Allowed Short Message Downlink Disabled BSC6900 SET GCELLEGPR SPARA(Optio nal) SET GCELLBASIC PARA(Optiona l) SET GCELLCCAD( Optional) SET GCELLPRIVA TEOPTPARA( Optional) SET GCELLPSCS( Optional) SET GCELLPSCS( Optional) SET GCELLPSCS( Optional) SET GCELLPSCS( Optional) SET GCELLPSCS( Optional) SET GCELLPSCS( Optional) ADD EMU(Optional ) SET GCELLPWRB ASIC(Optional ) Coding scheme of the downlink EDGE link. If the downlink uses the fixed coding scheme, this parameter is set to a value ranging from MCS1 to MCS9. If the DNSENDSMDIS BSC6900 DNTBFRELDELAY Release Delay of Downlink TBF BSC6900 Downlink TBF DNTHDCSDEGRAD Threshold from E1 CS2 to CS1 Downlink TBF DNTHDCSDEGRAD Threshold from E2 CS3 to CS2 Downlink TBF DNTHDCSDEGRAD Threshold from E3 CS4 to CS3 Downlink TBF DNTHDCSUPGRAD Threshold from E1 CS1 to CS2 Downlink TBF DNTHDCSUPGRAD Threshold from E2 CS2 to CS3 Downlink TBF DNTHDCSUPGRAD Threshold from E3 CS3 to CS4 Enable Door Status Alarm Reporting BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 Whether to allow BTS power control to prohibit sending pointWhether to-point short messages. If necessary, this parameter is used for controlling whether to send downlink releasing the downlink a Delay of short messages from TBF. After the last downlink RLC data block is transmitted on the network side and all the transmitted downlink data blocks are received, Retransmission threshold when the coding mode of the downlink TBF is changed from CS2 to CS1. When the downlink TBF retransmission rate is greater than Retransmission threshold when the coding mode of the TBF is changed from CS3 to CS2. When the TBF retransmission rate is greater than or equals to this value, Retransmission threshold when the coding mode of the downlink TBF is changed from CS4 to CS3. When the downlink TBF Retransmission rate is greater than threshold when the coding mode of the downlink TBF is changed from CS1 to CS2. When the TBF retransmission rate is less than or equals to this value, Retransmission threshold when the coding mode of the TBF is changed from CS2 to CS3. When the downlink TBF retransmission rate is less than threshold when the Retransmission or equals to CS2 coding mode of the downlink TBF is changed from CS3 to CS4. When the downlink TBF retransmission rate is less than or DOOR_ENGINE_M ASK BSC6900 Door status alarm switch Dual-antenna gain used to estimate the downlink power during assignment DOUBLEANTENNA Double Antenna GAIN Gain BSC6900 DPC DSP code[Whole Number] BSC6900 DSP code[Divided Number] As an integer, the DSP code can be expressed by a decimal digit or ADD a hexadecimal digit. If the DSP N7DPC(Mand code is expressed by a atory) hexadecimal digit, H' is added ADD N7DPC(Mand DSP code expressed in the format atory) ofis one of the key fields of It segments 8-8-8 identifying the block of A interface BLK CIC status and indicates the DPC ACIC(Mandat group index of the circuit ID of the ory) A interface to be blocked. ADD AE1T1(Option Index of the DPC group. see "ADD al) GCNNODE" command. Index of a DPC group. When multiple DPCs or one DPC ADD serves as a logical entity, this GCNNODE(M logical entity is called a DPC group. andatory) When the MSC pool function is DSP type. STP: indicates the signaling ADD transfer point. N7DPC(Mand A: indicates the signaling point of atory) the A interface control signaling ADD N7DPC(Mand atory) ADD The DSP index uniquely identifies a MTP3RT(Man DSP. ADD GNRNC(Mand Iur-g DPC index of a neighboring atory) RNC Maximum signal level difference ADD between the neighbor cell and the G2GNCELL(O serving cell for triggering directed ptional) retry Whether to optimize the call drops resulting from Abis territorial link SET fault. The value 0 means "optimize" GCELLSOFT( and 1 means "not optimize". If the Optional) value of thisoptimize theis 0, the call Whether to parameter call drops resulting from connection failure SET (handover access failure). The GCELLSOFT( value 0 means "optimize" and 1 Optional) means "not optimize the the value Whether to optimize". If call drops resulting from connection failure, SET operation and maintenance (OM) GCELLSOFT( intervention. The value 0 means Optional) "optimize" and 1 means "not DPCDNF BSC6900 DPCGIDX DPC Group Index BSC6900 DPCGIDX DPC Group Index BSC6900 DPCGIDX DPC Group Index BSC6900 DPCT DSP type BSC6900 DPX DSP index BSC6900 DPX DPX Directed Retry Handover Level Range BSC6900 DRHOLEVRANGE BSC6900 DROPCTRLABISCO Drop Optimize NNFAIL ABIS Link Failure BSC6900 Drop Optimize DROPCTRLCONNF Conn Fail[HO AILHOACCFAIL access fail] Drop Optimize DROPCTRLCONNF Conn Fail[OM AILOM intervention] BSC6900 BSC6900 DROPCTRLCONNF Drop Optimize AILOTHER Conn Fail[other] BSC6900 SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) Drop Optimize DROPCTRLCONNF Conn Fail[radio AILRLFAIL link fail] BSC6900 Drop Optimize Conn DROPCTRLCONNF Fail[resource not AILRRNOTAVL available] BSC6900 Drop Optimize DROPCTRLEQUIPF Equipment AIL Failure Drop Optimize Err DROPCTRLERRIND Ind[unsolicited DMRSP DM response] BSC6900 BSC6900 Drop Optimize DROPCTRLERRIND Err Ind[sequence SEQERR error] BSC6900 Drop Optimize DROPCTRLERRIND Err Ind[T200 T200 timeout] Drop Optimize DROPCTRLFORCH Forced Handover OFAIL Failure Drop Optimize Into-BSC DROPCTRLINBSCH Handover O Timeout Drop Optimize Intra-BSC DROPCTRLINTRAB Handover SCOUTHO Timeout Drop Optimize Intra-Cell DROPCTRLINTRAC Handover ELLHO Timeout Drop Optimize No MR for Long Time BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 DROPCTRLNOMR BSC6900 Whether to optimize the call drops resulting from a connection failure except for handover access failure, OM intervention, radio link failure, and unavailability of radio drops Whether to optimize the call resulting from connection failure (radio link failure). The value 0 means "optimize" and 1 means "not optimize". If the value ofdrops Whether to optimize the call this resulting from connection failure (unavailability of radio resources). The value 0 means "optimize" and 1 means to optimize the If the value Whether "not optimize". call drops resulting from equipment fault. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call Whether to optimize the call drops resulting from error indication (unsolicited DM response). The value 0 means "optimize" and 1 means "not optimize the the value Whether to optimize". If call drops resulting from error indication (sequence error). The value 0 means "optimize" and 1 means "not optimize". If the value ofdrops Whether to optimize the call this resulting from error indication (T200 timeout). The value 0 means "optimize" and 1 means "not optimize". If optimize the call drops Whether to the value of this resulting from forced handover failure. The value 0 means "optimize" and 1 means "not optimize". If optimize the call drops Whether to the value of this resulting from incoming-BSC handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value ofdrops Whether to optimize the call this resulting from outgoing internal inter-cell handover timeout. The value 0 means "optimize" and 1 means "not optimize the the value Whether to optimize". If call drops resulting from intra-cell handover timeout. The value 0 means "optimize" and 1 means "not optimize". If optimize the call drops Whether to the value of this resulting from no MS measurement reports for a long time. The value 0 means "optimize" and 1 means "not optimize". If the value of this Drop Optimize Out-BSC DROPCTRLOUTBS Handover CHOT8 Timeout Drop Optimize Release DROPCTRLRELIND Indication BSC6900 SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) SET GCELLSOFT( Optional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) ADD PORTFLOWC TRLPARA(Opt ional) BSC6900 DROPCTRLRESCH Drop Optimize K Resource Check BSC6900 Packet discard threshold of queue 0 [ms] Packet discard threshold of queue 1 [ms] Packet discard threshold of queue 2 [ms] Packet discard threshold of queue 3 [ms] Packet discard threshold of queue 4 [ms] Packet discard threshold of queue 5 [ms] DROPPKTTHD0 BSC6900 DROPPKTTHD1 BSC6900 DROPPKTTHD2 BSC6900 DROPPKTTHD3 BSC6900 DROPPKTTHD4 BSC6900 DROPPKTTHD5 BSC6900 Whether to optimize the call drops resulting from outgoing-BSC handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value ofdrops Whether to optimize the call this resulting from release indications. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call Whether to optimize the call drops resulting from resource check. The value 0 means "optimize" and 1 means "not optimize". If the value ofthe duration for is 0, the call data If this parameter buffering the in queue 0 is more than or equals to the value of this parameter, the subsequent packets added to queue 0 are discarded. If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, the subsequent packets added to queue 1 are discarded. If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, the subsequent packets added to queue 2 are discarded. If the duration for buffering the data in queue 3 is more than or equals to the value of this parameter, the subsequent packets added to queue 3 are discarded. If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, the subsequent packets added to queue 4 are discarded. If the duration for buffering the data in queue 5 is more than or equals to the value of this parameter, the subsequent packets added to queue 5 are discarded. DROPPWRINTERV Drop Power Time AL Interval[T3] BSC6900 SET This parameter specifies the BTSBAKPWR interval at which the power of a (Optional) TRX is continually decreased. SET This parameter specifies the delay BTSBAKPWR time before decreasing the power (Optional) of the TRXs. SET This parameter specifies the step BTSBAKPWR by which the power of a TRX is (Optional) decreased at a time. DROPPWRSTARTT Drop Power Start IME Time[T1] BSC6900 DROPPWRSTEP Drop Power Step BSC6900 DRXEN SMCBC DRX BSC6900 DRXTIMERMAX Max. Duration of DRX BSC6900 DRYSET Dehumidification Equipment BSC6900 Whether to support the discontinuous reception SET mechanism (DRX). To reduce the GCELLOTHE power consumption, the DRX is XT(Optional) introduced into the GSM entering Duration of the timer for the DRX mode. DRX is the SET parameter in the cell broadcast GCELLPSBA message. It indicates nonSE(Optional) continuous receiving mode. When Whether to start the dehumidification equipment of the SET BTS. BTSOUTPUT( In multi-mode scenario, the value Optional) of this parameter in this mode must ADD PPPLNK(Opti Number of the E1T1 port for onal) bearing the PPP link ADD MPLNK(Optio nal) ADD SCTPLNK(Opt ional) SET PHBMAP(Man DS1 E1T1 port No. BSC6900 DS1 E1T1 port No. Differentiated Service Codepoint Differentiated services code point Differentiated Service Codepoint BSC6900 DSCP BSC6900 Number of the E1T1 port for bearing the is a field of the IP data The DSCP PPP link packet. It is used to assign the differentiated service to the communication networks. The DSCP code is used to label each Service code of the PING command, used to identify the PING command DSCP BSC6900 PING IP(Optional) SET DSCPMAP(M andatory) DSCP BSC6900 DSCP DSCP BSC6900 DSP Kickoff DSPKIFFOFFTIMER Timer BSC6900 Differentiated service code is used to identify the service priority of the user. to be contained in the DSCP header of an IP packet. According SET to this parameter, the router BTSVLAN(Opt provides differentiated services for ional) packet streams. If this parameter is Duration for recovering all the SET DSPs. This timer is started when BSCPSSOFT the first DSP is recovered. When PARA(Optiona all the DSPs of the local subrack l) are recovered or the timer expires, DLD Number of the DSP. If you do not TCFILE(Mand specify this parameter, the usage atory) of all DSPs is queried. Meanings:DSP No. Value range:0~21 SET Content:none TCTYPE(Opti Recommended value(default onal) value):none DSPN DSP No. BSC6900 DSPN DSP No. BSC6900 DSPN DSP No. BSC6900 DSPN DSP No. BSC6900 DSPNO DSP No. BSC6900 DSPRECOVERTIME DSP Recover R Timer BSC6900 ADD OBJALMSHL D(Mandatory) SET TCPLYVOICE (Mandatory) SET TCPARA(Opti SET PSCELLTOD SP(Mandatory ) SET BSCPSSOFT PARA(Optiona l) Number of the DSP where the alarm is generated Number of the DSP in the DPU board Target DSP number This parameter specifies the value of the timer set to wait the fault recovery before the cell redistribution on the DSP. When a fault is detected on a DSP, this DST DaylightSave BSC6900 SET TZ(Optional) Whether daylight saving time starts DSTF Destination File Name BSC6900 ULD BTSDEVFILE( Mandatory) Name of the destination file ADD IPRT(Mandato ry) Destination IP address ADD BTSBFD(Man Destination IP address of BFD datory) Session. ADD BTSIPRT(Man datory) ADD BTSIPRTBIN Destination IP address ADD IPRT(Mandato ry) Subnet mask ADD BTSIPRT(Man datory) ADD BTSIPRTBIN Subnet mask of BTS Route. ADD TSCROSS(Ma ndatory) Destination of timeslot cross DSTIP Destination IP address BSC6900 DSTIP Destination IP Address BSC6900 DSTIP Destination IP Address BSC6900 DSTMASK Destination address mask BSC6900 DSTMASK Destination Address Mask BSC6900 DSTPORTNO Destination port No. BSC6900 DSTTSMASK Destination timeslot mask Directed Retry Load Access Threshold BSC6900 DTLOADTHRED BSC6900 DTRTYPE DRX Type BSC6900 DTRX Down Link No. BSC6900 DTRX Down Link No. BSC6900 DTRXPN Down TRX Board Pass No. BSC6900 DTRXPN Down TRX Board Pass No. BSC6900 DTRXSN Down TRX Slot No. BSC6900 DTRXSN Down TRX Slot No. BSC6900 DTRXSRN Down TRX Subrack No. BSC6900 DTRXSRN Down TRX Subrack No. BSC6900 Dummy Bit DUMMYBITRANDS Randomization WITCH Switch BSC6900 ADD TSCROSS(Ma ndatory) Target timeslot mask in the target Threshold of the load cell for the directed retry. Only a SET cell whose load is lower than or GCELLCCBA equal to this threshold can be SIC(Optional) selectedthe DRX supporting the Type of as a candicate target cell. VGCS service. An MS reads the SET NCH only when a new notification GCELLGSMR message of group call arrives. This (Optional) helps save power of the MS. This ADD BTSANTFEE DERBRD(Man Downlink TRX index number of the datory) newly added board SET BTSANTFEE DERCONNEC Index number of the downlink T(Optional) tributary ADD BTSANTFEE TRX board pass number DERBRD(Opti connected with the downlink onal) tributary SET BTSANTFEE TRX board pass number DERCONNEC connected with the downlink T(Optional) tributary ADD BTSANTFEE Number of the slot where the TRX DERBRD(Man board that connects to downlink datory) tributary is located SET BTSANTFEE Number of the slot where the TRX DERCONNEC board that connects to downlink T(Optional) tributary is located ADD BTSANTFEE Number of the subrack where the DERBRD(Man TRX board that connects to datory) downlink tributary is located SET BTSANTFEE Number of the subrack where the DERCONNEC TRX board that connects to T(Optional) downlink tributary is located Whether a BTS randomizes the SET dummy bits (0x2B) in all the GCELLSOFT( signaling messages that the BTS Optional) sends to an MS DUPLEX Duplex Mode BSC6900 SET BTSETHPOR The duplex mode of FE port is T(Optional) duplex or half-duplex. STR BTSTST(Man datory) Duration for starting the BTS test STR TRXBURSTT ST(Mandatory Duration for starting the TRX idle ) timeslot test STR BTSTST(Man datory) Duration for starting the BTS test STR BTSTST(Man Duration for starting the TRX idle datory) timeslot test Downlink multiplex threshold of dynamic channel conversion. SET When the subscriber number on GCELLPSCH the channel reaches the value M(Optional) (threshold/10), used to test the Um An MS can be the dynamic interface software synchronization ADD only when the DL signal strength AISSCFG(Opti after the power control onal) compensation in the test cell and ADD BTSCONNEC T(Mandatory) ADD DXX(Mandato ry) ADD DXXCONNEC Number of a DXX. It is unique in one BSC6900 and uniquely identifies a DXX. Number of a DXX. It is unique in one BSC6900 and uniquely identifies a DXX. DURATH Duration Hour BSC6900 DURATH Duration Hour BSC6900 DURATM Duration Minute BSC6900 DURATS DWNDYNCHNTRA NLEV Duration Second BSC6900 Downlink Multiplex Threshold of Dynamic Channel Conversion BSC6900 DWNINTEN DL Signal Strength Limit BSC6900 DXXINDEX Up DXX Index BSC6900 DXXINDEX DXX Index BSC6900 DXXPN Up DXX Port No. BSC6900 Timer of Releasing Idle Dynamic Channel BSC6900 DYNCHFREETM Level of DYNCHNPREEMPT Preempting LEV Dynamic Channel BSC6900 ADD BTSCONNEC T(Mandatory) Number wait for releasing the Time to of the upper DXX port dynamic channel after the TBF on SET the dynamic channel is released. GCELLPSCH When all the TBFs on the channel M(Optional) are released, the dynamic channel Mode of preempting the dynamic channel for the CS domain and PS SET domain. Only the channel GCELLPSCH configured in the TCH/F mode can M(Optional) be preempted. Reservation Threshold of DYNCHTRANRESL Dynamic Channel EV Conversion BSC6900 Allow Dynamic DYNOpenTrxPower Shutdown TRX BSC6900 Dynamic DYNPBTSUPPORT Transmission Div ED Supported BSC6900 E1DURAT Duration BSC6900 E1PORT Port No. BSC6900 E1PORTNOINBTSC E1 Port No ONBSC Connect To BSC BSC6900 E1SLCTTMU Transmission Board Type BSC6900 Number of full-rate TCHs reserved for the CS domain. This parameter SET is valid only when "Level of GCELLPSCH Preempting Dynamic Channel" is M(Optional) set to LEVEL1 or LEVEL2. SET This parameter specifies whether GCELLBASIC to allow the BSC6900 to enable the PARA(Optiona TRX Intelligent Shutdown feature l) on a cell. SET GCELLCHMG Whether to enable the cell to BASIC(Option support dynamic transmit diversity al) or dynamic PBT STR TRANSPERF TST(Mandator y) Duration of the E1 port.E1 mode Number for the test in For the STR BTS3012, BTS3012AE, BTS3012 TRANSPERF II and the UTRP board in TST(Mandator SingleRAN BTSs, the number can y) be a value from 0 to 7. For other ADD BTSABISHDL CPATH(Mand Number of the E1 port on the BTS atory) connected to the BSC. STR TRANSPERF TST(Mandator y) Type of the transmission board SET COPTLNK(Op tional) E1/T1 port number port from Number of the E1/T1 which the BTS extracts the SET transport clock. This parameter is BTSCLK(Man valid only when the clock type is set datory) to IP_TRANSFER. extended by the Number of the port ADD backboard TOP communication BTSTOPCON mechanism of the BTS. The TOP FIG(Mandator relation can be configured between y) the port the the BTS board panel Type of on E1/T1 from which the BTS extracts the transport clock. SET This parameter is valid only when BTSCLK(Man the clock type is set to datory) IP_TRANSFER. to be checked. Peer IP address The input address (CHKIPADDR) ADD must be the address (regardless of IPPATH(Mand the network segment address or atory) host address of the peer address) E1T1PN E1/T1 port No. BSC6900 E1T1PN E1/T1 Port No. BSC6900 E1T1PORTNO Backboard E1/T1 Port No. BSC6900 E1T1TYPE E1/T1 Type BSC6900 ECHOIP Check IP address BSC6900 ECNOOFF Ec/No Offset BSC6900 ADD G3GNCELL(O ptional) ADD GEXT3GCEL L(Optional) ECNOTHRES Ec/No Threshold for Layer Of 3G Cell BSC6900 ECSC ECSC BSC6900 ECSN End Serial No. BSC6900 SET GCELLCCBA SIC(Optional) EXP ALMLOG(Opti onal) STA End serial number of the alarm ALMLOG(Opti record As a performance counter for 3G cells, Ec/No indicates the ratio of the energy per received chip to the spectral noise power density. If the Ec/No ofdetermining the cell is Threshold for a 3G neighbor layer of the 3G neighbor cell. If the Ec/No of the 3G neighbor cell is less than this threshold, the neighbor cell is set tosending The early classmark the lowest control (ECSC) parameter specifies whether the MSs in a cell use early classmark sending. After a successful immediate assignment, ED End Date BSC6900 ADD SUBTSK(Opti Date when the scheduled task is onal) stopped EXP ALMLOG(Opti End date of the alarm record. By onal) default, the end date is 2037-12-31. STA ALMLOG(Opti End date of the alarm record. By onal) default, the end date is 2037-12-31. STR BTSLOG(Opti onal) End date SET TZ(Mandatory ) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) ED End Date BSC6900 ED End Date BSC6900 EDATE End Date BSC6900 EDAY End date Number of Satisfactory Measurements BSC6900 EDBLASTTIME BSC6900 EDBSTATTIME Total Number of Measurements BSC6900 Subcell HO Allowed Flow EDBSYSFLOWLEV Control Level BSC6900 End date of the daylight saving time According to the P/N rule, if the conditions for the handover between the subcells of an enhanced dual-frequency network are met during P P/N rule, if the According to the of N conditions for the handover between the subcells of an enhanced dual-frequency network are met during P of Nflow control If the current system level is greater than this parameter, the handover between the underlaid and overlaid subcells due to low or high load in the underlaid EDGE EDGE BSC6900 EDGEADJLASTTIM Edge HO AdjCell E Valid Time BSC6900 EDGEADJSTATTIM Edge HO AdjCell E Watch Time BSC6900 Handover Algorithm II Edge HO Valid Time BSC6900 Handover Algorithm I Edge HO Valid Time BSC6900 Handover Algorithm II Edge HO Watch Time BSC6900 Handover Algorithm I Edge HO Watch Time BSC6900 EDGELAST EDGELAST1 EDGESTAT EDGESTAT1 EFTIMMFLAG Effect Immediately Flag BSC6900 SET GCELLGPRS( Whether the current cell supports Optional) EDGE According to the P/N rule, if a neighbor cell meets the conditions ADD for selecting the neighbor cell for G2GNCELL(O edge handover in P of N ptional) measurement reports, the if a According to the P/N rule, edge neighbor cell meets the conditions ADD for selecting the neighbor cell for G2GNCELL(O edge handover in P of N ptional) measurement reports, the if the According to the P/N rule, edge conditions for edge handover are SET met in P of N measurement GCELLHOBA reports, the handover is triggered. SIC(Optional) This parameter specifies thethe According to the P/N rule, if conditions for edge handover are SET met for P seconds within N GCELLHOBA seconds, the handover is triggered. SIC(Optional) This parameter specifies thethe According to the P/N rule, if conditions for edge handover are SET met in P of N measurement GCELLHOBA reports, the handover is triggered. SIC(Optional) This parameter specifies thethe According to the P/N rule, if conditions for edge handover are SET met for P seconds within N GCELLHOBA seconds, the handover is triggered. SIC(Optional) This parameter specifies the SET BTSLOADCT RL(Mandatory ) Effect Immediately Flag(reserve) SET GCELLPSBA Whether to support the 11-bit SE(Optional) EGPRS access request SET GCELLGPRS( Whether the current cell supports Optional) EGPRS2-A Used for EDGE 8PSK transmission quality statistics. If MEAN_BEP is SET less than or equals to this GCELLNC2P threshold, the transmission quality ARA(Optional) is regarded to be deteriorated. Used for EDGE GMSK transmission quality statistics. If SET MEAN_BEP is less than or equals GCELLNC2P to this threshold, the transmission ARA(Optional) quality is regarded deteriorated. EGPRS11BITCHAN Support 11BIT REQ EGPRS Access BSC6900 EGPRS2A EGPRS2-A BSC6900 EGPRSBEPLIMIT8P EDGE 8PSK SK Quality Threshold BSC6900 EGPRSBEPLIMITG EDGE GMSK MSK Quality Threshold BSC6900 EM EndType BSC6900 EMCPRILV Priority of Emergency Call BSC6900 EMERGENCY Emergency verification BSC6900 Type of the end date. "WEEK" indicates that the end date is a SET weekday. "DATE" indicates that the TZ(Mandatory end date is a month day. ) "DATEWEEK" indicates the end Priority level of an emergency call. If this parameter is set to 15, the SET functions of reserving TCHs for GCELLCCAD( emergency calls and preempting Optional) TCHs areto verify the centralized Whether not enabled. If the two signaling link in the case of the link ADD establishment. ON: emergency MTP3LKS(Opt verification, that is, the verification ional) is not required. OFF: non ADD MPGRP(Optio nal) Error emit threshold. SET BSCABISPRI Differentiated service code of the MAP(Optional) specified to allow the function of Whether EML enhanced multi-level precedence SET and preemption (eMLPP). With the GCELLCCBA eMLPP function enabled, the SIC(Optional) network can use different policies Indicating whether the eMLPP function is enabled in a cell and SET indicating the eMLPP priority of the GCELLGSMR cell. From high to low, the priorities (Optional) are A, B, to include 4. No priority is Whether 0, 1, 2, 3, the Emlpp Priority information element in the SET Paging Command message over OTHSOFTPA the Abis interface when "Allow RA(Optional) EMLPP" is set to YES and the SET BSCABISPRI Service priority of the specified MAP(Optional) EML SET Service priority of the extension BSCSRVPRI( maintenance link (EML).0 is the Optional) highest priority. SET BSCABISPRI MAP(Optional) Specified EML Vlan Id SET TZ(Mandatory ) Month on which DST ends EMITTHD Error emit threshold BSC6900 EMLDSCP EML DSCP BSC6900 EMLPPEN Allow EMLPP BSC6900 EMLPPPRIORITY eMLPP Priority BSC6900 EMLPPPRIORITY Emlpp Priority In Paging BSC6900 EMLPRI EML Priority BSC6900 EMLSP EML Service PRI BSC6900 EMLVLANID EML VlanId BSC6900 EMONTH End month BSC6900 EMSIP EMS IP Address BSC6900 ADD EMSIP(Manda IP address of the NE management tory) system SET BTSFALLBAC Whether to enable the fallback K(Optional) function for the BTS SET BTSTMA(Man datory) SET GCELLBASIC PARA(Optiona l) ENABLE Fallback Function Enable BSC6900 ENABLED TMA Power Supply Enabled BSC6900 Whether to enable the power supply of the TMA ENCRY Encryption Algorithm BSC6900 ENCRYMODE Transport Encrypted Mode BSC6900 ENCRYMODE The Encrypted Mode BSC6900 Support End-toend User Tracing End2EndTraceState Function BSC6900 ENDAID End Alarm ID BSC6900 ENDCIC End CIC BSC6900 ENDCIC End CIC BSC6900 EndDayDSTPA Prohibit Close TRX End Day BSC6900 ENDHEATTEMP Heater Shutdown Temperature BSC6900 Encryption algorithm supported by the BSS side Encryption mode used when the NE serves as the FTP client SET AUTO: indicating that the FTP FTPSSRV(Opt client automatically selects the ional) encryption mode supported when Encryption mode the NE serves as the FTP server SET AUTO: indicating that the FTP FTPSCLT(Opt client automatically selects the ional) encryption mode end-to-end user Whether to enable tracing for the BSC. If this SET parameter is set to YES, the BSC OTHSOFTPA starts end-to-end user tracing after RA(Optional) the BSC receives the MSC Invoke EXP ALMLOG(Opti onal) STA ALMLOG(Opti End number of end alarm record It indicates the the CIC of the A interface CIC segment. When BLK operation mode is set to OPC ACIC(Mandat index, DPC group index, BSC ID, ory) orindicates the end CIC of the Pb It CIC, the parameter is interface CIC segment. If the BLK search object mode is set to PBCIC(Manda search by the specified range, the tory) parameter is mandatory. ADD This parameter specifies the end BSCDSTPAD date of a period during which the ATE(Mandator TRX Intelligent Shutdown feature is y) disabled. If the ambient temperature reaches the value of this parameter, the SET heater is shut down. BTSDHEUBP( In multi-mode scenario, the value Optional) of this parameter in one mode EndMonthDSTPA Prohibit Close TRX End Month BSC6900 ADD BSCDSTPAD ATE(Mandator y) This parameter specifies the end month of a period during which the TRX Intelligent Shutdown feature is disabled. ENDSUBTS End Sub Timeslot NO. BSC6900 Time When the EndTimeTACloseTrx Function Is PA Disabled BSC6900 SET BTSFORBIDT S(Optional) Number of the end sub-timeslot This parameter specifies the time SET for dynamically disabling the TRX BSCDSTPA(O Intelligent Shutdown feature each ptional) day. BLK ATERE1T1(M It indicates the end CIC of the Ater andatory) interface CIC segment. of the A It indicates the end CIC interface CIC segment. When BLK Operation mode is set to subrack AE1T1(Manda No., slot No., port No., or CIC, the tory) parameter is mandatory. SET BTSFORBIDT S(Mandatory) Number of the end timeslot SET Status of the scheduled task. This SCHTSKSW( parameter determines whether to Mandatory) start the scheduled task. ADD SUBTSK(Opti Status of the scheduled subtask to onal) be added of the underlaid subcell If the load is greater than this threshold, SET certain calls in the underlaid subcell GCELLHOIUO are handed over to the overlaid (Optional) subcell toto support PS downlink Whether balance the traffic SET MAC back pressures in GSM. GCELLPSOT When the buffer is overflowed, the HERPARA(Op L2 transmission rate is limited if tional) "User Planeenable the enhanced is Whether to DL Flow Ctrl Switch" concentric cell algorithm in a ADD concentric cell. GCELL(Mand If a cell supports the enhanced atory) concentric cell function, when an If all the calls in the overlaid subcell are handed over to the underlaid SET subcell when the channel seizure GCELLHOIUO ratio of the underlaid subcell is less (Optional) than "En Iuo Out Cell Low Load ENDTS End TS BSC6900 ENDTS End TS BSC6900 ENDTS End Timeslot NO. BSC6900 ENF Status BSC6900 ENF Subtask Status BSC6900 En Iuo Out Cell ENGOVERLDTHRS General H OverLoad Thred BSC6900 ENGSMPSDLMACF User Plane DL LOWCTRL Flow Ctrl Switch Enhanced Concentric Allowed BSC6900 ENIUO BSC6900 ENLDHOPRD Load Classification HO Period BSC6900 ENLDHOSTP Load Classification HO Step BSC6900 En Iuo Out Cell Low Load Thred Transmission Resource ENPREEMPTTRAN Preempting SADMT Support ENLOWLDTHRSH BSC6900 BSC6900 Transmission ENQUETRANSADM Resource T Queuing Support BSC6900 En Iuo Out Cell ENSOVERLDTHRS Serious H OverLoad Thred BSC6900 Enhanced TCH ENTCHADJALLOW Adjust Allowed BSC6900 ENTITYT Local entity type BSC6900 ENTITYT Destination entity type BSC6900 ENUTOOLOADINIL IniLev for EV EnUtoO Load HO BSC6900 Signal level step for the hierarchical SET load-based handover from the GCELLHOIUO overlaid subcell to the underlaid (Optional) subcell If the load of the underlaid subcell is less than this threshold, certain SET calls in the overlaid subcell are GCELLHOIUO handed over to the underlaid (Optional) subcellthisbalance theis set to When to parameter traffic "ON", if there are no available Abis SET transmission resources, a highBSCBASIC(O priority user can preempt the ptional) transmission resources of ato When this parameter is set low"ON", if there are no available Abis SET transmission resources, the BSCBASIC(O BSC6900 starts the queuing ptional) procedure of the underlaid subcell If the load for the services to wait is greater than this threshold, the SET period of the load-based handover GCELLHOIUO from the underlaid subcell to the (Optional) overlaid subcell, "UL Subcell Load Whether to enable the cell to SET centralize two busy half rate TCHs GCELLCHMG in different timeslots into one BASIC(Option timeslot through handover and then al) to combine the twolocal half rate Type of the M3UA idle entity. For details about the ASP and IPSP, ADD see RFC4666. M3LE(Mandat M3UA_ASP: suggested to use ory) when of the is a signaling transfer Type there destination entity. For details, see RFC4666. ADD M3UA_ASP: suggested to use M3DE(Mandat when there is a signaling transfer ory) point (STP) between the local entity Initial signal level used to compute the handover zone for an MS SET during the hierarchical load-based GCELLHOIUO handover from the underlaid (Optional) subcell to the overlaid subcell of SET Whether to enable the enhanced TCPARA(Opti packet loss concealment (EPLC) onal) function Return code of the command. If this parameter is specified, only the corresponding record is displayed. EXP If this parameter is not specified, LOG(Optional) the returnto disable emergency Whether code is not considered. calls. For the MSs of access levels SET 0 to 9, if the value of this parameter GCELLCCBA is NO, emergency calls are SIC(Optional) enabled. For the MSs of access EPLCSwitch EPLC Switch BSC6900 ERCODE Return Code BSC6900 ERGCALLDIS Emergent Call Disable BSC6900 ERRALARMTHD Error-frame alarm threshold BSC6900 ERRDETECTSW Error-frame detect switch BSC6900 SET ETHPORT(Op tional) ADD PPPLNK(Opti Error-frame alarm threshold SET ETHPORT(Op tional) ADD PPPLNK(Opti Error-frame detect switch SET BSCABISPRI Differentiated service code of the MAP(Optional) specified ESL SET BSCABISPRI MAP(Optional) Serviceof a service running over an Priority priority of the ESL extended signaling link (ESL). SET ESLs are used for more reliably BSCSRVPRI( transmitting important signaling Optional) messages.0 is the highest priority. SET BSCABISPRI MAP(Optional) Specified ESL Vlan Id EXP ALMLOG(Opti End synchronization number of the onal) alarm record BSC waiting for an Timer for the Establish Indication message after SET sending an Immediate Assignment GCELLTMR( message. If T3101 expires before Optional) the BSC receives an Establish Whether to add the TA value to a SET complete layer-3 message to AITFOTHPAR provide the LCS function on the A A(Optional) interface OML is switched to a When the port where the connection is SET successfully established, the BTSRINGATT switchover cannot be performed R(Optional) over a certain period of time, which SET TZ(Mandatory ) End time of DST The operation time of the log record is prior to this time. If this EXP parameter is not specified, the end LOG(Optional) time is not limited. ESLDSCP ESL DSCP BSC6900 ESLPRI ESL Priority BSC6900 ESLSP ESL Service PRI BSC6900 ESLVLANID ESL VlanId BSC6900 ESSN End Sync Serial No. BSC6900 ESTABINDTIMER T3101 BSC6900 Add TA to A ESTINDL3MSGTAF Interface EST LAG IND BSC6900 ESTTIME Ring II Rotating Penalty Time BSC6900 ET EndTime BSC6900 ET End Time BSC6900 ET End Time BSC6900 ET Execute Type BSC6900 ET End Time BSC6900 Time when the scheduled subtask is stopped. If the time mode is set ADD to "DAILY_T", "WEEKLY_T", or SUBTSK(Man "MONTHLY_T", you should set this datory) parameter.mode of the commands Execution 1. ONE_BY_ONE: indicating that RUN the commands are executed one BATCHFILE( by one according to the execution Optional) sequence. Only one command can The operation time of the log record is prior to this time. If this COL parameter is not specified, the end LOG(Optional) time is not limited. EXP ALMLOG(Opti End time of the alarm record. By onal) default, the end time is 23:59:59. STA ALMLOG(Opti End time of the alarm record. By onal) default, the end time is 23:59:59. End date and time of a broadcast message. This is a key parameter ADD for identifying a simple cell GSMSCB(Ma broadcast message. You can use ndatory) "DSP GSMSCB" to query and ADD OP(Mandatory End date of the user operation. ) Input format: YYYY&MM&DD STR BTSLOG(Opti onal) End time Type of the log to be queried. The EXP result is displayed by the specified LOG(Optional) type. ADD End time of the user operation. The OP(Mandatory input format of this parameter is ) HH&MM&SS. SET TZ(Mandatory ) Weekday on which DST ends SET TZ(Mandatory ) Sequence of the end week of DST ET End Time BSC6900 ET End Time BSC6900 ET End Time BSC6900 ETD End Date BSC6900 ETIME End Time BSC6900 ETP Log Type BSC6900 ETT End Time BSC6900 EWEEK End week BSC6900 EWSEQ End week sequence BSC6900 Upper Limit of EX_ANO1_SIG_MA Signal Output of X External Analog 1 BSC6900 Lower Limit of Signal Output of EX_ANO1_SIG_MIN External Analog 1 BSC6900 Upper limit of extended output analog signal 1. If "Sensor Type of ADD External Analog 1" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Lower limit of extended output analog signal 1. If "Sensor Type of ADD External Analog 1" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of ADD EMU(Optional Sensor type of extended analog ) signal 1 measurement range of Maximum extended analog signal 1. If ADD "Sensor Type of External Analog 1" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Minimum measurement range of extended analog signal 1. If ADD "Sensor Type of External Analog 1" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Upper limit of extended output analog signal 2. If "Sensor Type of ADD External Analog 2" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Lower limit of extended output analog signal 2. If "Sensor Type of ADD External Analog 2" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of ADD EMU(Optional Sensor type of extended analog ) signal 2 measurement range of Maximum extended analog signal 2. If ADD "Sensor Type of External Analog 2" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Minimum measurement range of extended analog signal 2. If ADD "Sensor Type of External Analog 2" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Upper limit of extended output analog signal 3. If "Sensor Type of ADD External Analog 3" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Lower limit of extended output analog signal 3. If "Sensor Type of ADD External Analog 3" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Sensor Type of EX_ANO1_TYPE External Analog 1 BSC6900 Upper Limit of Measurement EX_ANO1_VAL_MA Range of X External Analog 1 BSC6900 Lower Limit of Measurement Range of EX_ANO1_VAL_MIN External Analog 1 BSC6900 Upper Limit of EX_ANO2_SIG_MA Signal Output of X External Analog 2 BSC6900 Lower Limit of Signal Output of EX_ANO2_SIG_MIN External Analog 2 BSC6900 Sensor Type of EX_ANO2_TYPE External Analog 2 BSC6900 Upper Limit of Measurement EX_ANO2_VAL_MA Range of X External Analog 2 BSC6900 Lower Limit of Measurement Range of EX_ANO2_VAL_MIN External Analog 2 BSC6900 Upper Limit of EX_ANO3_SIG_MA Signal Output of X External Analog 3 BSC6900 Lower Limit of Signal Output of EX_ANO3_SIG_MIN External Analog 3 BSC6900 Sensor Type of EX_ANO3_TYPE External Analog 3 BSC6900 Upper Limit of Measurement EX_ANO3_VAL_MA Range of X External Analog 3 BSC6900 Lower Limit of Measurement Range of EX_ANO3_VAL_MIN External Analog 3 BSC6900 Upper Limit of EX_ANO4_SIG_MA Signal Output of X External Analog 4 BSC6900 Lower Limit of Signal Output of EX_ANO4_SIG_MIN External Analog 4 BSC6900 ADD EMU(Optional Sensor type of extended analog ) signal 3 measurement range of Maximum extended analog signal 3. If ADD "Sensor Type of External Analog 3" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Minimum measurement range of extended analog signal 3. If ADD "Sensor Type of External Analog 3" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Upper limit of extended output analog signal 4. If "Sensor Type of ADD External Analog 4" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Lower limit of extended output analog signal 4. If "Sensor Type of ADD External Analog 4" is set to EMU(Optional VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of ADD EMU(Optional Sensor type of extended analog ) signal 4 measurement range of Maximum extended analog signal 4. If ADD "Sensor Type of External Analog 4" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V; if "Sensor Type of Minimum measurement range of extended analog signal 4. If ADD "Sensor Type of External Analog 4" EMU(Optional is set to VOLTAGE, the unit of this ) parameter is V;SoLSA exclusiveof Whether it a if "Sensor Type SET access cell. If it is a SoLSA GCELLSERV exclusive access cell, only the MS PARA(Optiona subscribing the Localised Service l) Area (LSA)for the rate ofthis cell. Threshold can access the number of bad frames to the total SET number of TRAU frames. If the bad GCELLSOFT( frame rate exceeds this threshold Optional) within the "Period of Mute SET Received signal strength at an MS GCELLPWRB expected in power forecast, which ASIC(Optional helps to compute the initial transmit ) power of the BTS SET Received signal strength at the GCELLPWRB BTS expected in power forecast, ASIC(Optional which helps to compute the initial ) transmit power of an MS Sensor Type of External Analog 4 BSC6900 Upper Limit of Measurement EX_ANO4_VAL_MA Range of X External Analog 4 BSC6900 Lower Limit of Measurement Range of EX_ANO4_VAL_MIN External Analog 4 BSC6900 EX_ANO4_TYPE EXCACC Exclusive Access BSC6900 Exceptional Frame Threshold EXCEPFRAMETHR of Mute Detect ES Class1 BSC6900 EXPDLRXLEV Expected DL RX_LEV BSC6900 EXPULRXLEV Expected UL RX_LEV BSC6900 EXT2GCELLID Cell Index BSC6900 ID of the cell. The cell ID cannot ADD conflict with other cell IDs in the GEXT2GCEL BSC6900. The cells in the BSC are L(Mandatory) numbered sequentially. ADD GEXT2GCEL L(Mandatory) Name of the cell ID of the cell. The cell ID cannot ADD conflict with other cell IDs in the GEXT3GCEL BSC. The cells in the BSC are L(Mandatory) numbered sequentially. ADD GEXT3GCEL L(Mandatory) Name of the cell ADD EXTNCELL(M Index of the cell in the adjacent andatory) BSC ADD EXTNCELL(M andatory) SET GCELLPSOT HERPARA(Op tional) SET BTSALM(Opti onal) SET GCELLEXTM SRPARA(Opti onal) SET GCELLEXTM SRPARA(Opti onal) SET GCELLEXTM SRPARA(Opti onal) EXT2GCELLNAME Cell Name BSC6900 EXT3GCELLID Cell Index BSC6900 EXT3GCELLNAME Cell Name BSC6900 EXTADJCELLID BSC Adjacent Cell Index BSC6900 BSC Adjacent EXTADJCELLNAME Cell Name Extended Cell Throughput Enhancement BSC6900 EXTCELLTHRENH BSC6900 Name of the cell in the adjacent BSC Whether to support the downlink throughput enhancement function of the dual timeslot cell. When this switch is turned on, the system can allocate the packet downlink EXTFlag Extended Switch of Input Alarm BSC6900 Extension Measurement Command Whether to enable alarm extension input for the BTS Whether the network requires an MS to send an extension measurement report EXTMEASORD BSC6900 EXTRPTPERIOD Extension MR Period BSC6900 EXTRPTTYPE Extension MR Type BSC6900 EXTTP Cell Extension Type BSC6900 Time interval between two extension measurement reports Type of an extension measurement report. There are three types of extension measurement reports: type 1, type 2, and type cell is an extension cell. Whether a 3. A double-timeslot extension cell ADD regards an additional TDMA frame GCELL(Option as access delay extension. In al) theory, the supported TA value is EXTUTBFNODATA Not Send Dummy Message with Extended Uplink TBF BSC6900 FACCH Msg FACCHRESENDINT Resend Interval FACCH Send FACCHSENDNOTM Notification Msg SGIND Indication FACCH Send FACCHSENDPGMS Paging Msg GIND Indication BSC6900 BSC6900 BSC6900 SET Whether to send the Dummy GCELLPSBA message during the deactivated SE(Optional) period of the extended uplink TBF Interval of sending a paging message or notification message SET on the FACCH. Messages on the GCELLGSMR FACCH are sent in the mode of (Optional) speech frame stealing. A large Whether to allow sending notification messages on the SET FACCH. If the value of this GCELLGSMR parameter is YES, an MS engaged (Optional) in a point-to-point sending paging a Whether to allow call can receive messages on the FACCH. If the SET value of this parameter is YES, an GCELLGSMR MS can receive a paging message (Optional) on the group call channel. You can SET BSCABISPRI MAP(Optional) SET GCELLCHMG BASIC(Option al) FACTORSW TRM Factor switch BSC6900 FACTORYMODE Factory Mode BSC6900 FAILSIGSTRPUNIS Penalty Level H after HO Fail Continuous FANADJUSTCOMM adjustment AND0 command Discrete FANADJUSTCOMM adjustment AND1 command Duty ratio FANADJUSTCOMM adjustment AND2 command BSC6900 Activation factor switchto ON, the If this parameter is set BSC assigns the channels in the TRXs of the cell in a polling manner. Therefore, each TRX has an evensignal levelbe used. In this Penalty chance to imposed on a target cell to which the handover SET fails due to congestion or poor GCELLHOFIT radio quality. This penalty helps to PEN(Optional) prevent the MS from making a SET FANSPEED(O ptional) Continuous speed adjustment SET FANSPEED(O ptional) Discrete speed adjustment SET FANSPEED(O ptional) Duty ratio-based speed adjustment SET FANSPEED(O ptional) Fan adjustment mode SET FANSPEED(M andatory) Type of the fan BSC6900 BSC6900 BSC6900 Fan adjustment FANADJUSTMODE mode BSC6900 FANFLAG Fan Type BSC6900 FANSPEEDMODE Speed adjustment mode BSC6900 SET FANSPEED(M andatory) Fan adjustment mode LOD FAN(Mandator y) SET GCELLBASIC PARA(Optiona l) FANTYPE FanBox Type BSC6900 Fast Call Setup FASTCALLTCHTHR TCH Usage ESHOLD Threshold BSC6900 Type a channel box After of the fan request message is received, the type of the channel needs to be specified. In this case, if the threshold of the load on the TCH in the current cell is smaller FASTCNETFLAG Configure Ring II BSC6900 SET Ring II function switch. The BTSRINGATT parameter should be set to "YES" R(Optional) when the ring II function is enabled. SET TCPARA(Opti Whether to enable the memory selfonal) check and self-healing function Whether to send and process the flow control frame on the physical SET layer. The setting of this parameter ETHPORT(Op must be negotiated with that on the tional) interconnected side. to "YES", it If the parameter is set indicates that some data packets SET are discarded to ensure the basic BTSETHPOR functions of the BTS are not T(Optional) affected whenstopping RSL flow Threshold for the FE port is control. If the occupancy of the SET LAPD queue is less than this GTRXFC(Opti threshold, the BSC6900 stops flow onal) control. SET ETHPORT(Ma ndatory) Flow control parameter index ADD PPPLNK(Opti onal) Flow control parameter index ADD MPGRP(Optio nal) Flow control parameter index ADD IPLOGICPOR T(Optional) Flow control parameter index FaultDetectSwitch Fault Detect Switch Physical layer flow control switch BSC6900 FC BSC6900 FC Flow Control BSC6900 FCETHD Flow Control End Threshold BSC6900 FCINDEX Flow control parameter index BSC6900 FCINDEX Flow control parameter index BSC6900 FCINDEX Flow control parameter index BSC6900 FCINDEX Flow control parameter index BSC6900 FCINDEX Flow control parameter index BSC6900 ADD PORTFLOWC TRLPARA(Ma ndatory) Flow control parameter index ADD ETHTRK(Opti onal) Flow control parameter index SET BSCABISPRI MAP(Mandato ry) Flow control parameter index ADD BTSAUTOPL AN(Mandatory ) Cabinet No. of the father BTS ADD BTSCONNEC Cabinet No. for the port of the T(Optional) father BTSfor starting RSL flow Threshold control. If the occupancy of the SET LAPD queue is greater than this GTRXFC(Opti threshold, the BSC6900 starts flow onal) control. ADD PPPLNK(Opti onal) CRC verification mode of PPP link. ADD MPLNK(Optio nal) CRC verification mode of MP link. SET Flow control switch. Other switches FCSW(Manda are valid only when "Flow control tory) switch" is "ON". Float charging voltage. Float charging compensates the SET discharged capacity of the battery BTSAPMUBP( so that the battery can be charged Optional) to full mode ofindefinitely. The value Input voltage the BA lists. SET AUTO: In this mode, the system GCELLIDLEF fills in the BA1 and BA2 lists DDBA1(Mand according to neighboring relations atory) of cells. This parameter indicate whether to SET generate the FDD BA2 table GCELLHOFD automatically according to neighbor DBA2(Mandat cell relations or to input the FDD ory) BA2 table manually FCINDEX Flow control parameter index BSC6900 FCINDEX Flow control parameter index BSC6900 FCN Cabinet No. of Father BTS BSC6900 FCN Cabinet No. of Father BTS BSC6900 FCSTHD Flow Control Start Threshold BSC6900 FCSTYPE CRC check mode BSC6900 FCSTYPE CRC check mode BSC6900 FCSW Flow control switch BSC6900 FCV Float-Charging Voltage BSC6900 FDDBA1TAG FDDBA1 Input Tag BSC6900 FDDBA2TAG FDDBA2 Input Tag BSC6900 FDDCELLOFF FDD Reporting Offset BSC6900 FDDCELLTHRED FDD Reporting Threshold BSC6900 FDDDIVERSITY Diversity Indication BSC6900 FDDDLUARFAN Downlink Frequency BSC6900 SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) SET GCELLIDLEF DDBA1(Mand atory) SET GCELLIDLEF DDBA1(Mand atory) ADD GEXT3GCEL L(Optional) SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) Offset of a FDD cell report. When the priority of a 3G cell is sequenced, the value of this parameter be added to the receive level of theof a FDD cell report. Threshold 3G cell in the When the receive level value in the measurement report about a 3G cell exceeds the value of this parameter, the measurement Diversity indication of a 3G cell. This parameter indicates whether the transmit diversity mode on the common channel in a cell is activated.0 means No,1 means an Downlink frequency number that MS in the connected mode retrieves from the 3G neighboring cell list. The numbers are sent through system message FDDECQUALTHRS PS FDD Ec/No H Quality Threshold BSC6900 Minimum Ec/No of the 3G FDD cell candidate Number of UTRAN FDD cells that should be included in measurement report This parameter specifies one of the thresholds of the signal level for FDD cell reselection. A FDD cell can be selected as a candidate cell only when the receive level of the Offset of the minimum threshold for Ec/No during a FDD cell reselection. During the cell reselection from a GSM cell to a FDD cell, can Ec/No of the target A 3G cell the be a candidate cell only when the average receive level of the 3G cell is greater than the value of this parameter of the current serving cell. This parameter specifies whether Ec/No or RSCP is used for the measurement report on a FDD cell. Ec/No stands for the signal-tonoise ratio. RSCP standsof UTRAN Minimum level threshold for the cell reselection. During the cell reselection decision from a GSM cell to a FDD cell, this parameter is used to calculate the RSCP FDDFREQCNUM FDD Multirate Reporting BSC6900 FDDQMIN FDD Qmin BSC6900 FDDQMINOFFSET FDD Qmin Offset BSC6900 FDDQOFF FDD Q Offset BSC6900 FDDREP FDD REP QUANT BSC6900 FDDRSCPMIN FDD RSCP Min. BSC6900 FDDRSCPQUALTH PS FDD RSCP RSH Quality Threshold BSC6900 ADD GEXT3GCEL Minimum RSCP of the 3G FDD cell L(Optional) candidate FDDSCRAMBLE Scrambling Code BSC6900 SET GCELLIDLEF DDBA1(Mand atory) SET FCCPUTHD( Optional) SET GCELLSOFT( Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLHOPT P(Optional) SET GCELLHOPQ FDWINDOW Fast judgement window BSC6900 FERRPTEN FER Report Enable BSC6900 FERSTATTH1 FER Threshold 1 BSC6900 FERSTATTH2 FER Threshold 2 BSC6900 FERSTATTH3 FER Threshold 3 BSC6900 FERSTATTH4 FER Threshold 4 BSC6900 FERSTATTH5 FER Threshold 5 BSC6900 FERSTATTH6 FER Threshold 6 BSC6900 FERSTATTH7 FER Threshold 7 BSC6900 FHMODE Frequency Hopping Mode BSC6900 FILE File Name BSC6900 EXP LOG(Optional) Scrambling code of a 3G cell, used for distinguishing MSs or cells. Scrambling codes are used after spreading. Therefore, the bandwidth of a signal is not Number of CPU usage sampling times for fast judgment. The value of this parameter must be of half size of "Filter window" or smaller. Whether the BTS reports the frame erase ratio in a measurement report or preprocessed measurement report the If the FER carried in measurement report (MR) received is lower than or equal to "FER threshold 1", the value of "FER 0 and Quality Level N" the MR If the FER carried in is received is greater than "FER threshold 2" but meanwhile lower than "FER threshold 3", the value ofthe FER and Quality Level N" is If "FER 2 carried in the MR received is greater than "FER threshold 3" but meanwhile lower than "FER threshold 4", the value ofthe FER and Quality Level N" is If "FER 3 carried in the MR received is greater than "FER threshold 4" but meanwhile lower than "FER threshold 5", the value ofthe FER and Quality Level N" is If "FER 4 carried in the MR received is greater than "FER threshold 5" but meanwhile lower than "FER threshold 6", the value ofthe FER and Quality Level N" is If "FER 5 carried in the MR received is greater than "FER threshold 6" but meanwhile lower than "FER threshold 7", the value ofthe FER and Quality Level N" is If "FER 6 carried in the MR received is greater than "FER threshold 7", the value of "FER 7 and Quality Level N" is incremented by specifies the This parameter one. frequency hopping mode of a cell. When this parameter is set to "NO_FH", all the TRXs of the cell do not join in frequency hopping. The file name cannot contain the path and suffix. The suffix is automatically added. The file name is composed of English letters, numerals, and common symbols, FILE Target File Path BSC6900 FileName File Name BSC6900 FILEPATH Export File Path BSC6900 ZIP FILE(Mandato ry) Path ofof the backup file. The file Name the target file name is composed of English BKP letters, numerals, and common LOGDB(Optio symbols, and the characters (@, #, nal) !, %, ^, &, *, [, ], /, \, ', and ") cannot EXP Path to save the exported file. The CFGMML(Opti path must be a valid path on the onal) OMU server. If the OMU runs the EXP LINUX system, the input path must GCELLTEMP start with the symbol "/" or "\", for EXP ALMLOG(Opti Type of the alarm log file to be onal) exported number of former values Maximum when the receive level of the SET serving cell or the receive level of GCELLNC2P the neighbor cell is filtered. The ARA(Optional) greater theresult. the greater the Execution value, If you select "FALSE", only the records of failed operations are EXP displayed. If you select "TRUE", LOG(Optional) only the records of successful Whether to enable 0.2 dB downlink SET power control. This power control GCELLPWR3( function improves the power Optional) control precision.the fireWhether to start extinguishing equipment of the SET BTS. BTSOUTPUT( In multi-mode scenario, the value Optional) of this parameter in this mode must This parameter specifies the static SET Abis resource load threshold. If the BTSFLEXABI static Abis resource load is less SPARA(Optio than the static Abis resource load nal) threshold, the TCHF is Time threshold for delaying the SET report of a clear alarm. If the alarm BTSALMFLAS recurs within the time specified by HTHD(Option this parameter after it is cleared, al) the clear alarm is not reported. Time threshold for delaying the SET report of an alarm. If the alarm is BTSALMFLAS cleared within the time specified by HTHD(Option this parameter, the alarm is not al) reported. to enable the filtering of Whether Otherwise, the alarm is SET the intermittent alarms. If the value BTSALMFLAS of this parameter is "DISABLE", HTW(Optional "Flash Statis Alarm Raise Time ) Window" and "Flash Statis Alarm FILETYPE Log File Type BSC6900 FILTERWNDSIZE Filter Window Size BSC6900 FIN Final BSC6900 FINESTEPPCALLO 0.2dB Power WED Control Enable BSC6900 FIRESET Fire-extinguishing Equipment BSC6900 Fix Abis Prior FIXABISPRIORABIS Choose Load LOADTHRED Thred BSC6900 FlashAlmClrThd Flash Alarm Clear Threshold BSC6900 FlashAlmOccurThd Flash Alarm Occur Threshold BSC6900 FlashFilterEn Flash Filter Enable BSC6900 FlashStatisAlmClrT W Flash Statistic Alarm Clear Time Window BSC6900 Flash Statistic FlashStatisAlmOccur Alarm Raise TW Time Window BSC6900 FLEXABISMODE Flex Abis Mode BSC6900 FLEXMAIO Start Flex MAIO Switch BSC6900 FLEXTSCSWITCH Flex TSC Switch BSC6900 Flux FlowCountPeriodTic Measurement ks Period Fast Flux FLOWCOUNTPERI Measurement ODTSRAPIDADJ Period BSC6900 BSC6900 Time window for observing the clearance of the intermittent alarms. In this time window, the BTS statistical alarm is cleared if the occurrence ofobserving the Time window for the intermittent intermittent alarms generated during the statistical period. In this time window, the BTS statistical alarm is timeslot assignment mode Service reported if the occurrence for the BTS. If this parameter is set to FIX_16K_ABIS, the BSC6900 ADD assigns a fixed Abis transmission BTS(Optional) timeslot to aenable If this parameter Whether to TCH. the function of Flex mobile allocation index offset ADD (MAIO). In the tight frequency GCELL(Option reuse case of the GSM system, al) adjacent-channel interference and Whether to enable the function of the Flex training sequence code SET (TSC). If the value of this GCELLSOFT( parameter is ON and the BTS Optional) supports the Flex TSC function, the SET BSCPSSOFT PARA(Optiona Period of collecting the traffic l) statistics measurement period. The Fast flux SET ratio of the uplink flux to the BSCPSSOFT downlink flux is calculated at the PARA(Optiona interval specified by this parameter l) to determine the current service SET BTSALMFLAS HTW(Optional ) SET BTSALMFLAS HTW(Optional ) SET ETHPORT(Op tional) Port flow control switch ADD PPPLNK(Opti onal) Link flow control switch ADD MPGRP(Optio nal) Link flow control switch ADD IPLOGICPOR T(Optional) Logical port flow control switch ADD ETHTRK(Opti onal) Port flow control switch FLOWCTRLSWITC Flow control H switch BSC6900 FLOWCTRLSWITC Flow control H switch BSC6900 FLOWCTRLSWITC Flow control H switch BSC6900 FLOWCTRLSWITC Flow control H switch BSC6900 FLOWCTRLSWITC Flow control H switch BSC6900 FLOWCTRLSWITC Flow control H switch BSC6900 FLTPARAA1 Filter Parameter A1 BSC6900 FLTPARAA2 Filter Parameter A2 BSC6900 FLTPARAA3 Filter Parameter A3 BSC6900 FLTPARAA4 Filter Parameter A4 BSC6900 FLTPARAA5 Filter Parameter A5 BSC6900 FLTPARAA6 Filter Parameter A6 BSC6900 FLTPARAA7 Filter Parameter A7 BSC6900 FLTPARAA8 Filter Parameter A8 BSC6900 FLTPARAB Filter Parameter B BSC6900 FLUSHTRANSFERS FLUSH-LL PDU WITCH Transfer Switch BSC6900 FMSMAXOPCC MS_TXPWR_MA X_CCH BSC6900 SET BSCABISPRI MAP(Optional) Specified port flow control switch One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. One of the nine parameters (filter parameters A1 to A8 and filter SET parameter B) used to configure the GCELLHOEM filter for determining whether the G(Optional) received the received signal level Trend of signal level drops rapidly. of the cell during a period. This SET parameter helps to configure the GCELLHOEM filter for determining whether the G(Optional) received signal level drops rapidly. This parameter determines SET whether the BSC transfers the LLC BSCPSSOFT PDUs in the buffer to the target cell PARA(Optiona or discards these LLC PDUs in the l) buffer when receiving the FLUSHMaximum transmit power level of MSs. As one of the cell reselection SET parameters in system message 3, GCELLCCCH( this parameter is used to control Optional) the transmit power of MSs. For FMUTYPE FMU Board Type BSC6900 SET BTSFMUABP( Optional) Type of the FMUA board EXP ELABEL(Optio nal) Name of the electronic label file DLD LICENSE(Man datory) ULD LICENSE(Man Name of the file EXP DEVFILE(Opti onal) EXP CFGMML(Opti onal) BKP DB(Optional) CHK DATA2LIC(Op tional) DLD RETANTCFG( Mandatory) EXP BTSDEVFILE( DLD BTSPATCH(O ptional) SET BSCPSSOFT PARA(Optiona l) ADD GCNNODE(O ptional) SET TCPARA(Opti onal) SET BSCPSSOFT PARA(Optiona l) FN File Name BSC6900 FN File Name BSC6900 FN File Name BSC6900 FN File Name BSC6900 Name of the file Name of the file. The following special characters are not allowed in the file name: \, /, :, *, ?, ", <, >, and |. Name of the specified file. By default, the file is in the OMU activearea path \ftp\license folder. FN File Name BSC6900 FN File Name BSC6900 FN File Name BSC6900 FORBIDEDGU Allow E Down G Up Switch BSC6900 Anti DPC FORBIDNO7FLASH Intermittent DISC Disconnect Timer BSC6900 Name of the software to be downloaded software to be Name of the downloaded.The file name must be with the extension of *.zip.If you do not enter the file name, all the valid files in the directory are to allow Switch specifying whether the downlink EGPRS TBF and the uplink GPRS TBF to share the same channel. On: allow the downlink EGPRS TBF determining Length of the timer for and the the intermittent disconnection of the SS7 link to the DPC. When the time of SS7 link disconnection exceeds the period specified by the Force_Limit_Time Force Limit Time BSC6900 Time limit for restraining the noise level Force2Phase Force MS Twophase Access BSC6900 Whether the forced phase-2 access is allowed for the MSs FORCEDCELLEFRS Allow Forced WITCH EFR in Cell BSC6900 Force MS to Send Ho Access FORCEMSACCESS SWITCH BSC6900 FPN Dest Father BTS Port No. BSC6900 Whether to forcibly enable the EFR function. When this parameter is SET set to YES, if both the MS and the GCELLSOFT( BSC6900 support the enhanced full Optional) rate (EFR), the BSC6900 forcibly Whether an MS is forced to send a SET Handover Access message, which GCELLSOFT( is indicated by an information Optional) element in the handover command. ADD BTSAUTOPL AN(Mandatory Port No. of the father BTS ) connected with the BTS ADD BTSCONNEC Number of the port for the T(Mandatory) destinationtime of BTS for Maximum father delay multiplexing. This parameter is ADD used for the system to send the IPMUX(Option multiplexed data. If the time for al) buffering the data exceeds this SET BTSAUTOPL Whether to generate the frequency ANCFG(Optio and BSIC by using the automatic nal) optimization algorithm If this switch is on, it indicates that SET the frequency and BSIC are BTSAUTOPL generated automatically. If this ANCFG(Optio switch is off, it indicates that the nal) data must beis on, it indicates that If this switch configured manually. SET the frequency and BSIC are BTSAUTOPL generated automatically. If this ANCFG(Optio switch is off, it indicates that the nal) data must be configured manually. ADD MPGRP(Optio nal) SET BTSEXCURSI ON(Mandatory ) SET MP segment size,the length of packet should be bigger or equel with it. FPN Dest Father BTS Port No. BSC6900 FPTIMER Maximum Delay Time[ms] BSC6900 FQBSICOPTSWITC Freq. and BSIC H Optimize Switch BSC6900 FQBSICSWITCH Freq. and BSIC Plan Switch BSC6900 FQBSICSWITCH1 Freq. and BSIC Plan Switch BSC6900 FRAGSIZE MP flake size BSC6900 FRAMEOFFSET Frame Offset [Frame No.] BSC6900 FRAMEOFFSET Frame Offset BSC6900 FRDLDTX FR Use Downlink DTX BSC6900 Frame offset of the BTS clock offset. The frame offset technology arranges the frame SET numbers of different cells under the GCELLOTHE same BTS to be different from one XT(Optional) another by one frame offset. Thus, Whether the downlink SET discontinuous transmission (DTX) GCELLBASIC function is enabled for full rate (FR) PARA(Optiona calls. This function is also restricted l) by the DTX switch in the MSC. If FREQ Time Mode BSC6900 FREQ Time Mode BSC6900 Time mode used when the log is exported. "ONTIME" indicates the EXP time between two exact time. LOG(Mandato "RELATIVE_T" indicates the time ry) before on different time. Based the current requirements, you can set different time points for ADD the scheduled task. SUBTSK(Man Seven time modes are available: datory) 1. ONTIME: When this parameter ADD GTRX(Mandat ory) ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR FREQ Frequency BSC6900 Frequency of the TRX FREQ1 Frequency 1 BSC6900 Frequency 1 FREQ10 Frequency 10 BSC6900 Frequency 10 FREQ11 Frequency 11 BSC6900 Frequency 11 FREQ12 Frequency 12 BSC6900 Frequency 12 FREQ13 Frequency 13 BSC6900 Frequency 13 FREQ14 Frequency 14 BSC6900 Frequency 14 FREQ15 Frequency 15 BSC6900 Frequency 15 FREQ16 Frequency 16 BSC6900 Frequency 16 FREQ17 Frequency 17 BSC6900 Frequency 17 FREQ18 Frequency 18 BSC6900 FREQ19 Frequency 19 BSC6900 FREQ2 Frequency 2 BSC6900 FREQ20 Frequency 20 BSC6900 FREQ21 Frequency 21 BSC6900 FREQ22 Frequency 22 BSC6900 FREQ23 Frequency 23 BSC6900 FREQ24 Frequency 24 BSC6900 FREQ25 Frequency 25 BSC6900 FREQ26 Frequency 26 BSC6900 FREQ27 Frequency 27 BSC6900 FREQ28 Frequency 28 BSC6900 ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR Frequency 18 Frequency 19 Frequency 2 Frequency 20 Frequency 21 Frequency 22 Frequency 23 Frequency 24 Frequency 25 Frequency 26 Frequency 27 Frequency 28 FREQ29 Frequency 29 BSC6900 FREQ3 Frequency 3 BSC6900 FREQ30 Frequency 30 BSC6900 FREQ31 Frequency 31 BSC6900 FREQ32 Frequency 32 BSC6900 FREQ33 Frequency 33 BSC6900 FREQ34 Frequency 34 BSC6900 FREQ35 Frequency 35 BSC6900 FREQ36 Frequency 36 BSC6900 FREQ37 Frequency 37 BSC6900 FREQ38 Frequency 38 BSC6900 FREQ39 Frequency 39 BSC6900 ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR Frequency 29 Frequency 3 Frequency 30 Frequency 31 Frequency 32 Frequency 33 Frequency 34 Frequency 35 Frequency 36 Frequency 37 Frequency 38 Frequency 39 FREQ4 Frequency 4 BSC6900 FREQ40 Frequency 40 BSC6900 FREQ41 Frequency 41 BSC6900 FREQ42 Frequency 42 BSC6900 FREQ43 Frequency 43 BSC6900 FREQ44 Frequency 44 BSC6900 FREQ45 Frequency 45 BSC6900 FREQ46 Frequency 46 BSC6900 FREQ47 Frequency 47 BSC6900 FREQ48 Frequency 48 BSC6900 FREQ49 Frequency 49 BSC6900 FREQ5 Frequency 5 BSC6900 ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR Frequency 4 Frequency 40 Frequency 41 Frequency 42 Frequency 43 Frequency 44 Frequency 45 Frequency 46 Frequency 47 Frequency 48 Frequency 49 Frequency 5 FREQ50 Frequency 50 BSC6900 FREQ51 Frequency 51 BSC6900 FREQ52 Frequency 52 BSC6900 FREQ53 Frequency 53 BSC6900 FREQ54 Frequency 54 BSC6900 FREQ55 Frequency 55 BSC6900 FREQ56 Frequency 56 BSC6900 FREQ57 Frequency 57 BSC6900 FREQ58 Frequency 58 BSC6900 FREQ59 Frequency 59 BSC6900 FREQ6 Frequency 6 BSC6900 FREQ60 Frequency 60 BSC6900 ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR Frequency 50 Frequency 51 Frequency 52 Frequency 53 Frequency 54 Frequency 55 Frequency 56 Frequency 57 Frequency 58 Frequency 59 Frequency 6 Frequency 60 FREQ61 Frequency 61 BSC6900 FREQ62 Frequency 62 BSC6900 FREQ63 Frequency 63 BSC6900 FREQ64 Frequency 64 BSC6900 FREQ7 Frequency 7 BSC6900 FREQ8 Frequency 8 BSC6900 FREQ9 Frequency 9 BSC6900 ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR ADD GCELLFREQ( Optional) ADD GCELLMAGR SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) ADD BTSANTFEE DERBRD(Opti onal) Frequency 61 Frequency 62 Frequency 63 Frequency 64 Frequency 7 Frequency 8 FREQADJ Frequency Adjust Switch BSC6900 FREQADJVALUE Frequency Adjust Value BSC6900 FREQBAND Frequency Band Attribute BSC6900 GSM900 Band FREQLOADSHARE Traffic Load TRAFFTHRSH Share Threshold BSC6900 FREQLST Freq Band List BSC6900 SET GCELLCHMG AD(Optional) SET GCELLFREQ SCAN(Option al) List of frequency bands Frequency 9 Whether to enable the automatic frequency correction algorithm. This parameter is used for the fastmoving handover algorithm. If the parameter is set to YES, the BTS Frequency correction parameter. Used for the fast-moving handover algorithm, the value of this parameter must be translated into a binary number.typesvalue board Frequency band The of the This parameter is only applicable to the DDPU/DFCU/DFCB/DCOM/DDPM/ DCBM. Threshold for load sharing in the 900 MHz frequency band. Assume that an MS supports multiple subbands in the 900 MHz frequency band. If the cell load is equal to or Frequency Reuse FREQREUSEMODE Mode BSC6900 SET GTRXDEV(Op tional) STR NCS(Mandato ry) SET GCELLSOFT( Optional) SET GCELLHOBA SIC(Optional) SET GCELLBASIC PARA(Optiona l) ADD BTSAUTOPL AN(Mandatory ) FREQS Frequency List BSC6900 FREQSCANRLSTTY Frequency Scan PE Result Type BSC6900 FRINGEHOEN Edge HO Allowed BSC6900 Frequency multiplexing mode in the TRX. To enable a loose frequency multiplexing mode such as 4x3 multiplexing, set this parameter to LOOSE. To enable a tight List of the frequencies to be measured. This parameter is represented as a character string where the IDs of the TRXs to be measuredscanning result by the Type of a are separated in &, period from the start of a frequency scanning task to the reporting of the scanning result. Frequency scanning refers to the Whether to enable the edge handover algorithm. When an MS makes a call at the edge of a cell, the call may drop if the received signal level is too low. To avoid Whether the uplink DTX function is enabled for FR calls. For details, see GSM Rec. 05.08. FRULDTX FR Uplink DTX BSC6900 FSN Slot No. of Father BTS BSC6900 Slot No. of the father BTS FSN Slot No. of Father BTS BSC6900 FSRN Subrack No. of Father BTS BSC6900 ADD BTSCONNEC Slot No. for the port of the father T(Optional) BTS ADD BTSAUTOPL AN(Mandatory ) Subrack No. of the father BTS ADD BTSCONNEC Subrack No. for the port of the T(Optional) father BTS FSRN Subrack No. of Father BTS BSC6900 FT File Type BSC6900 EXP Type of the file used for saving LOG(Optional) exported logs ADD ADJMAP(Man datory) Activation factor table index ADD TRMFACTOR (Mandatory) Activation factor table index FTI Factor table index BSC6900 FTI Factor table index BSC6900 FTI Factor table index BSC6900 SET BSCABISPRI MAP(Mandato ry) Activation factor table index SET GCELLHOBA ATCB difference between the SIC(Optional) overlaid and underlaid subcellsfull Duration of the handover from rate to half rate. If the cell load is SET greater than the preset threshold, GCELLHOBA the calls that meet the conditions SIC(Optional) for the handover P/N rule, rate to According to the from full if the conditions for the handover from SET full rate to half rate are met for P GCELLHOBA seconds within N seconds, the SIC(Optional) handover is triggered. SET GCELLHOBA Path loss difference between the SIC(Optional) overlaid and underlaid subcells Period of the handover from full rate to half rate. If the cell load is SET greater than the preset threshold, GCELLHOBA the calls that meet the conditions SIC(Optional) for the handover P/N rule, rate to According to the from full if the conditions for the handover from SET full rate to half rate are met for P GCELLHOBA seconds within N seconds, the SIC(Optional) handover is triggered. bandwidth If the available forward is less than or equal to this value, ADD the forward congestion alarm is TRMLOADTH emitted and forward congestion (Optional) control is striggered. bandwidth If the available forward is greater than this value, the ADD forward congestion alarm is TRMLOADTH cleared and forward congestion (Optional) control is stopped. If the ratio of available forward bandwidth is greater than this ADD value, the forward congestion TRMLOADTH alarm is cleared and forward (Optional) congestionof available forward If the ratio control is stopped. bandwidth is less than or equal to ADD this value, the forward congestion TRMLOADTH alarm is emitted and forward (Optional) congestion control is triggered. If the available forward bandwidth is greater than this value, the ADD forward overload congestion alarm TRMLOADTH is cleared and forward overload (Optional) control is stopped. FULLTOHALFHOAT F-H ATCB Offset CBOFFSET Overlay BSC6900 FULLTOHALFHODU RATION F-H Ho Duration BSC6900 FULLTOHALFHOLA STTIME F-H Ho Last Time BSC6900 FULLTOHALFHOPA F-H Pathloss THOFFSET Offset Overlay BSC6900 FULLTOHALFHOPE RIOD F-H Ho Period BSC6900 FULLTOHALFHOST F-H Ho Stat. ATTIME Time BSC6900 FWDCONGBW Forward congestion remain bandwidth BSC6900 Forward congestion clear FWDCONGCLRBW remain bandwidth BSC6900 Forward congestion clear remain ratio Forward congestion remain ratio FWDCONGCLRTH BSC6900 FWDCONGTH BSC6900 Forward overload FWDOVLDCLRRSV congestion clear BW remain bandwidth BSC6900 FWDOVLDCLRTH Forward overload congestion clear remain ratio BSC6900 Forward overload congestion remain bandwidth BSC6900 Forward overload congestion remain ratio BSC6900 Forward handover reserved ratio Forward handover reserved bandwidth FWDOVLDRSVBW FWDOVLDTH If the ratio of available forward bandwidth is greater than this ADD value, the forward overload TRMLOADTH congestion alarm is cleared and (Optional) forward overload control is If the available forward bandwidth is less than or equal to this value, ADD the forward overload congestion TRMLOADTH alarm is emitted and forward (Optional) overload control is triggered. If the ratio of available forward bandwidth is less than or equal to ADD this value, the forward overload TRMLOADTH congestion alarm is emitted and (Optional) forward overload control is ADD TRMLOADTH Ratio of reserved forward (Optional) bandwidth for handover user ADD TRMLOADTH Reserved forward bandwidth for (Optional) handover user If the load balance between a 2G SET cell and a 3G cell is greater than OTHSOFTPA the threshold, load balance is RA(Optional) triggered. used to modulate the Coefficient SET load level of a 2G system so that GCELLHOINT the load level of the 2G system can ERRATLDB(O be compared with that of a 3G ptional) system. SET TCPARA(Opti onal) SET GCELLPSPW PARA(Optiona l) FWDRESVHOTH BSC6900 FWDRSVHOBW BSC6900 CS 2G 3G Load G2G3GLdBlcDeltaT Balance Delta hrd Threshold 2G Load G2GLoadAdjustCoef Adjustment f Coefficient BSC6900 BSC6900 G711_Mode G711 Mode BSC6900 GAMMA GATHET GAMMA Offset Information Collection End Time Load Threshold of Offset Collection BSC6900 G711 Mode. A/U law configuration, 0-A law (default), 1-U law Expected signal receiving strength on the BTS side when GPRS dynamic power control is implemented BSC6900 GATHLOD BSC6900 ADD AISSCFG(Opti End time for collecting the offset onal) information Cell load threshold for collecting ADD the offset information. If the load AISSCFG(Opti threshold is exceeded, the offset onal) information is not collected. ADD AISSCFG(Ma Whether to collect the offset ndatory) information GATHON Offset Information Collection Switch BSC6900 GATHST Offset Information Collection Start Time BSC6900 GBRQOS Support GBR QoS BSC6900 ADD AISSCFG(Opti onal) SET GCELLPSOT HERPARA(Op tional) GCChk Group Call Check BSC6900 Start time for collecting the offset information QoS parameter from Obtains the the Aggregate BSS QoS Profile (ABQP) of packet flow context (PFC) when the MS and the network supportspecifies whether This parameter the PFC; obtains to enable the VGCS/VBS check SET function. If the BSS works BSCBASIC(O abnormally, the BTS may ptional) periodically send notification Format of the geographic ADD coordinates. The values include GPS(Optional) "DEG" and "SEC". Whether the assignment of channels in overlaid subcells is SET enabled for the VGCS service in GCELLGSMR the case of underlaid subcell (Optional) congestion. Generally, only of the Whether direct preemption the channels of other services is SET enabled for the VGCS service. If GCELLGSMR the value of this parameter is NO, a (Optional) handover is performed for the call Global routing management switch. SET If this switch is turned on, the IP GLOBALROU addresses in the controlled range TESW(Manda cannot be in the same network tory) segment. Delay of transmit diversity when SET GMSK is used. Generally, the GCELLBASIC parameter is applicable to general PARA(Optiona fading environments. In this case, l) the transmit diversity can obtain the SET GCELLGPRS( Mandatory) ADD GCELLQUICK SETUP(Optio nal) SET GCELLRESEL ECTPARA(Op tional) GCDF GCDF BSC6900 VGCS Channel GCSCHNASSULCH Assign in NEN Channel Enable VGCS IM GCSIMPREEMPTIO Preemption NEN Enable Global route management GLOBALROUTESW switch Diversity Transmitter GMSK Delay BSC6900 BSC6900 BSC6900 GMSKDELAY BSC6900 GPRS GPRS BSC6900 Whether the current cell supports GPRS GPRS Support GPRS BSC6900 GPRS Cell GPRSCELLRESELE Reselect CTHYESTERESIS Hysteresis BSC6900 GPRSCHPRI PDCH Channel Priority Type BSC6900 Whether the currently cell supports the GPRS value of the cell in the Hysteresis same routing area. When the MS in the ready state reselects a cell, if the original cell and the target cell are in the same type of the channel EGPRS priority routing area, the If this parameter is set to GPRS, SET the EDGE MSs cannot use this GTRXCHAN( channel. Optional) If this parameter is set to GPRSHCSTHR Threshold of HCS Signal Strength BSC6900 GPRSPENALTYTIM GPRS Penalty E Time BSC6900 SET GCELLSERV PARA(Optiona l) SET GCELLNCRE SELECTPAR A(Optional) SET GCELLNC2P ARA(Optional) SET GCELLNCRE SELECTPAR A(Optional) SET BTSDGPSBP( Optional) SET BTSUSCUBP( GPRSRXQUALLIMI GPRS Quality T Threshold BSC6900 GPRSTEMPOFFSE GPRS T Temporary Offset BSC6900 GPSORGLONASS GPS or Glonass BSC6900 Threshold of hierarchical cell structure (HCS) signal strength. The MS calculates the C31 according to the signal strength and itsused whenand selects the Timer threshold the MS calculates the C2 (used to evaluate the channel quality during cell reselection). The time information is transmitted in the transmission Used for the GPRS system quality statistics. When the transmission quality threshold is exceeded, the transmission quality is regarded deteriorated. prevent This parameter is used to repeated cell reselection of a fast moving MS. The MS does not select this cell when the duration of maintaining the BCCHadopted Synchronization clock signal when two satellite cards are used together. GPS:Trace GPS only. GLONASS:Trace GLONASS only. GPSGlonass:Trace GPS and GPSPERIOD GPS data report period BSC6900 Grade Access GRADEACCALLOW Allow BSC6900 Group Call Num GROUPCALLNUM1 1 BSC6900 Group Call Num GROUPCALLNUM2 2 BSC Node Redundancy Group Index BSC Node Redundancy Group Name BSC6900 ADD GPS(Optional) SET GCELLCHMG BASIC(Option al) SET BTSCHNFALL BACK(Mandat ory) SET BTSCHNFALL BACK(Mandat ory) Period for reporting GPS data Whether to allow hierarchical access and to reserve resources for high-priorityVGCS call that the Number of the MSs BTS originates in the timeslot in the TRX in fallback mode. This parameter is represented in decimal, of the as 10000569. If the Number such VGCS call that this BTS originates in the timeslot in the TRX in fallback mode. This parameter is represented in decimal, such as 10000569. If this GROUPINDEX BSC6900 SET GBSCREDGR Index of the BSC Node P(Mandatory) Redundancy Group SET GBSCREDGR P(Optional) SET BTSFLEXABI SPARA(Optio nal) GROUPNAME BSC6900 Group Release GROUPRELTSNUM TS Number BSC6900 Name of the BSC Node Redundancy Group Maximum number of secondary links that are released in batches when the Abis resource preemption occurs on the Abis interface GRPID Transport Resource Group No. BSC6900 Transport Resource Group Type BSC6900 ADD RSCGRP(Man datory) SET BTSIP(Mandat Transport resource group number ADD RSCGRP(Man datory) SET GCELLSBC(O ptional) ADD GSMSCB(Ma GRPT GS Geography Scope BSC6900 Type of the transport resource group Geographical coverage of a simple cell broadcast message. You can run "DSP GSMSCB" to query and obtain the information. This parameter, "Code", and GSMCSBWRATE CS ratio BSC6900 ADD TRMLOADTH Ratio of bandwidth occupied by the (Optional) CS service in the GSM SET BSCBASIC(O ptional) SET GCELLCCUT RANSYS(Opti onal) SET GCELLPSOT HERPARA(Op tional) Standard priority for GSM CS highpriprity MSs. 15 is the highest priority. of neighboring cells that Number meet the following conditions: If "MBR" is indicated in a system message, the MS reports the number of neighboring cells at Whether to support the cell reselection from the GSM network to the TD network in the packet transmission mode GSMCSUSERHIGH GSM CS High PRILEV Level Standard BSC6900 GSMFREQCNUM Serving Band Reporting BSC6900 GSM-to-TD Cell GSMTOTDALLOWE Reselection D Allowed BSC6900 GUARDTYPE ICMP type which will be guarded BSC6900 GWIP BTS SeGW IP Address BTS Security Gateway IP Address BSC6900 GWIP BSC6900 ADD ICMPGUARD( Packet type against the ICMP Mandatory) attack When the BTS is accessed from ADD the public network, the BTS BTSAUTOPL security network IP address must AN(Optional) be address of the BTS security IP configured. gateway. This parameter needs to SET be configured when the BTS BTSIP(Option connects to the BSC6900 through al) the public network. SET OTHSOFTPA Whether to support CS half rate RA(Optional) data services SET GCELLHOBA ATCB difference between the SIC(Optional) overlaid and underlaid subcells Support Half HalfRateDataSuppor Rata Data t Service BSC6900 HALFTOFULLATCB H-F ATCB Offset OFFSET Overlay BSC6900 HALFTOFULLHODU RATION H-F Ho Duration BSC6900 SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) HALFTOFULLHOLA STTIME H-F Ho Last Time BSC6900 Duration of the handover from half rate to full rate. If the cell load is less than the preset threshold, the calls that meet the conditions for the handoverthe P/N rule, if to full According to from half rate the conditions for the handover from half rate to full rate are met for P seconds within N seconds, the handover is triggered. HALFTOFULLHOPA H-F Pathloss THOFFSET Offset Overlay BSC6900 HALFTOFULLHOST H-F Ho Stat. ATTIME Time BSC6900 SET GCELLHOBA Path loss difference between the SIC(Optional) overlaid and underlaid subcells According to the P/N rule, if the conditions for the handover from SET half rate to full rate are met for P GCELLHOBA seconds within N seconds, the SIC(Optional) handover is triggered. SET BTSRXUBP(O Whether the tower-top amplifier is ptional) installed on antenna tributary 1. SET BTSRXUBP(O Whether the tower-top amplifier is ptional) installed on antenna tributary 2. ADD SCTPLNK(Opt Heartbeat interval when the SCTP ional) server is idle ADD BTSRXUCHAI N(Mandatory) ADD G2GNCELL(O ptional) ADD G2GNCELL(O ptional) SET BTSBAT(Opti onal) SET BTSBAT(Opti onal) Number of the cabinet where the main board of the RXU chain or ring is located. P/N rule, if the According to the conditions for the handover to a different micro cell due to fast movement are met in P of N measurement reports, the if the According to the P/N rule, conditions for the handover to a different micro cell due to fast movement are met in P of N measurement interrupting the Threshold for reports, the power supply to the TRXs. If the BTS works with the battery power supply, when the battery voltage is less than this threshold, the BTS Threshold for interrupting the power supply to the TMU. If the BTS works with the battery power supply, when the battery voltage is less than this threshold, the BTS HAVETT1 Antenna Tributary 1 Flag BSC6900 HAVETT2 Antenna Tributary 2 Flag BSC6900 HBINTER Heartbeat interval BSC6900 HCN Head Cabinet No. BSC6900 HCSLASTTIME HCS HO Valid Time BSC6900 HCSSTATTIME HCS HO Watch Time BSC6900 HIERPWRPARA1 Hierarchical Power Para1 BSC6900 HIERPWRPARA2 Hierarchical Power Para2 BSC6900 Support High HiFreqBandSupport Frequency Band BSC6900 HIGHESTPRIORITQ Highest Priority UALFIRST for Quality First Highest-Priority MSs Rapid Preemption BSC6900 HIGHLEVPREEM BSC6900 HIGHPRIUSERQUA Highest Priority LFIRST User Quality First BSC6900 Type of a high frequency type supported by the BSC6900, Frequencies on DCS1800: 512-885 Frequencies onare assigned Full rate TCHs PCS1900: 512-810 preferentially to the MSs with priority levels equal to or less than this threshold, except when the MSs parameter specifies full rate This request only half or whether the MS with priority level 1 directly SET releases the preempted call. When OTHSOFTPA this parameter is set to Yes, the RA(Optional) access delay of MSs with high SET GCELLCHMG Whether to enable the priorityBASIC(Option based channel assignment al) algorithm SET BSCBASIC(O ptional) SET GCELLCHMG BASIC(Option al) SET BTSAPMUBP( Whether to enable load power-off Optional) against highconsider history priority Whether to temperature records during channel SET assignment. GCELLCHMG If this parameter is set to YES, the AD(Optional) history priority records are SET GCELLGPRS( Optional) SET GCELLHOIUO (Optional) ADD GCNOPERAT OR(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) Whether the cell supports the MS with the DTM multi-timeslot capabilityto assign a channel in the Whether overlaid or underlaid subcell in the case of the intra-BSC incoming handover to the concentric cell. If this parameter is set to SysOpt, Whether to allow handover between different operators. If the BSC6900 supports RAN sharing, MSs in a cell of this operator can be handed over to a cell signal level If the downlink received of other of a neighbor cell is greater than "Min DL Level on Candidate Cell" plus "Min Access Level Offset", the neighbor cell can be listed in the of If the uplink received signal level a neighbor cell is greater than "Min UL Level on Candidate Cell" plus "Min Access Level Offset", the neighbor cell can be listed in the HIGHTEMPLOADP WROFF High Temp Load Power Off BSC6900 HISPRIOALLOW History Record Priority Allowed BSC6900 HMCDTM Support HMC DTM BSC6900 Pref. Subcell in HOALGOPERMLAY HO of Intra-BSC Handover HOBTWNOTHOPAL Between LOW Operators Allow BSC6900 BSC6900 HOCDCMINDWPW Min DL Level on R Candidate Cell BSC6900 Min UL Level on HOCDCMINUPPWR Candidate Cell BSC6900 HOCELLIDTYPE Specify Index of Cell Handover to BSC6900 SET FHO(Mandato ry) Type of indexing the target cell HOCELLNAME Cell Name of Handover to BSC6900 HOCTRLSWITCH Current HO Control Algorithm BSC6900 SET FHO(Mandato ry) SET GCELLHOBA SIC(Optional) SET GCELLHOEM SET GCELLHOFA ST(Optional) SET GCELLHOFA ST(Optional) SET GCELLHOFA ST(Optional) SET GCELLHOFA ST(Optional) ADD G3GNCELL(O ptional) ADD G3GNCELL(O ptional) SET GCELLHOUT RANFDD(Opti onal) ADD G2GNCELL(O ptional) SET FHO(Mandato ry) ADD GEXT2GCEL L(Optional) SET GCELLHOFA Unique name of the target cell Handover HODIRFORECASTE Direction N Forecast Enable BSC6900 Handover Direction Forecast Last HODIRLASTTIME Times BSC6900 Handover Direction Forecast Statistic HODIRSTATIME Times BSC6900 Quick Handover Down Trigger Level FDD 3G Better Cell HO Valid Time TDD 3G Better Cell HO Valid Time HODOWNTRIGE BSC6900 HODURT3G BSC6900 HODURT3GTDD BSC6900 HOECNOTH3G Ec/No Threshold for Better 3G Cell HO BSC6900 HOLASTTIME Quick Handover Last Time BSC6900 Whether to use handover algorithm generationdirectiocurrently Handover 1 or 2 forcast switch. When this parameter is set to YES, the BSC6900 can forecast the handover direction of the call in fast handover so that the bestP in the This parameter indicates target P/N rule for MS handover direction forcast. P/N rule: Among N handovers, the MS is handed over to Class in the This parameter indicates N B P/N rule for MS handover direction forcast. P/N rule: Among N handovers, the MS is handed over to Class B Fast handover can be triggered only when the downlink level of the serving cell is less than this parameter.to the P/N rule, if the According conditions for the handover to a better 3G cell are met for P seconds within N seconds, the handover is triggered. According to the P/N rule, if the conditions for the handover to a better 3G cell are met for P seconds within N seconds, the handover is triggered. The 3G better cell handover can be triggered only when the Ec/No of a neighboring 3G cell is greater than this thresholdthe P/N rule, of the According to for a period if time. conditions for fast handover are met in P of N measurement reports, the handover is triggered. This parameter specifies the Type of handover in terms of connection transfer between chnnels or betweenbe triggered Fast handover can cells only when the path loss difference between the serving cell and a neighbor cell on the chain is equal to or greater than this parameter. HOMOD Handover Scope BSC6900 HOOFFSET Quick Handover Offset BSC6900 HOOLRXLEVOFFS ET Handover to Underlayer RxLev Offset BSC6900 HOOPTSEL Inter-rat HO Preference Inter UL/OL Subcells HO Penalty Time BSC6900 HOPENALTYTIME BSC6900 SET GCELLCHMG AD(Optional) SET GCELLHOUT RANFDD(Opti onal) SET SET GCELLHOED BPARA(Optio nal) ADD GCELLMAGR P(Mandatory) SET GCELLMAIOP LAN(Mandator y) ADD GCELLMAGR P(Mandatory) SET GCELLHOUT RANFDD(Opti onal) SET SET OTHSOFTPA RA(Optional) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Mand atory) SET GTRXHOP(O ptional) ADD GEXT2GCEL L(Optional) SET GCELLHOFA If the cell is an enhanced concentric cell, this parameter with the current downlink received signal level and "UtoO HO Received Level specifies whether a This parameter Threshold" 2G cell or to a 3G cell is preferentially selected as the target cell for handover. When this parameter is set to An MS cannot be handed over from the underlaid subcell to the overlaid subcell in this duration after the MS is handed over from the overlaid subcell to the underlaid Index of the frequency hopping data, used for a TRX to locate the frequency hopping sequence HOPINDEX Hop Index BSC6900 HOPINDEX Hop Index BSC6900 Logical number of the MA group HOPMODE Hop Mode BSC6900 HOPRETH2G HO Preference Threshold for 2G Cell BSC6900 HopSingleFreqOptS Hop Group Single witch Freq Optimization BSC6900 HOPTRXHSN Hop TRX Group HSN BSC6900 HOPTRXINDEX Hop TRX Group Index BSC6900 HOPTYPE Hop Type BSC6900 HOPUNISHVALUE Quick Handover Punish Value BSC6900 Implementation mode of frequency hopping If the receive level of the neighboring 2G cell that ranks the first in the candidate cell list is equal to or smaller than this threshold, the BSC preferentially If this parameter is set to ON, the channel on a single frequency of an MA group is allocated to an MS with thesequence number (HSN) of Hoping non-FH attribute. a hopping antenna group. If the value of this parameter is 0, the services over a TRX are adjusted to other TRXs in the hopping TRX index that a hopping antenna index corresponds to. A hopping antenna enables signals of multiple TRXs to switch between several antennas instead of mode of the Frequency hopping fixing an TRX. Frequency hopping assists in interference averaging and frequency diversity. If this parameter is set to RF_FH, To avoid ping-pong handover, the received signal of the original serving cell is decreased by "Quick handover punish value" in "Quick handover punish time" after fast HOREFTMR BSC HO Protect Time BSC6900 HORSCPTH3G RSCP Threshold for Better 3G Cell HO BSC6900 ADD AISSCFG(Opti onal) SET GCELLHOUT RANFDD(Opti onal) SET SET MSGSOFTPA RA(Optional) ADD G3GNCELL(O ptional) ADD G3GNCELL(O ptional) ADD G2GNCELL(O ptional) Speech VER in SDCCH HO REQ HoSdcchSpeechVer ACK BSC6900 FDD 3G Better Cell HO Watch Time TDD 3G Better Cell HO Watch Time HOSTAT3G BSC6900 HOSTAT3GTDD BSC6900 HOSTATICTIME Quick Handover Static Time BSC6900 HOSTTYPE The host type of signalling point BSC6900 ADD OPC(Optional) SET BTSIP(Option al) ADD GEXT2GCEL L(Optional) SET GCELLHOBA SET GCELLHOFA ST(Optional) SET GCELLHOPA NT(Optional) SET GCELLHOPA NTQUICKSET UP(Mandatory ) Time for reserving the handover reference for one of the two BSCs that collect the offset information The 3G better cell handover is triggered only when the RSCP of a neighboring 3G cell is greater than this threshold forREQ ACK time. Whether an HO a period of message contains the information element Speech Version during an SDCCH handover. If a signaling channel handover between BSCs According to the P/N rule, if the conditions for the handover to a better 3G cell are met in P of N measurement reports, the handover is triggered. According to the P/N rule, if the conditions for the handover to a better 3G cell are met in P of N measurement reports, the handover is triggered. According to the P/N rule, if the conditions for fast handover are met in P of N measurement reports, the handover is triggered. This parameter specifies the Indicates the host type of the signalling point. When the BSC node redundancy feature is enabled, the primary BSC and the secondary BSC each HOSTTYPE HostType BSC6900 HOTHRES Inter-layer HO Threshold BSC6900 HOUPTRIGE Quick Handover Up Trigger Level BSC6900 HPANTMODE Cell Antenna Hopping BSC6900 HPANTMODE Cell Antenna Hopping BSC6900 Host type of an IP BTS Handover threshold during the handovers between cells on different layers or of different priorities. This value is used to suppress inter-layer ping-pong Fast handover can be triggered only when the uplink signal level of the serving cell is less than this parameter. enable the TRX to Whether to support antenna hopping In a GSM cell, the BCCH broadcasts the frequency, frame number, system information, and Whether to enable the TRX to support antenna hopping In a GSM cell, the BCCH broadcasts the frequency, frame number, system information, and HPN Head Port No. BSC6900 HPRIOR Highest Priority BSC6900 HPVFLAG Hierarchical Power-off Config. Enabled BSC6900 ADD BTSRXUCHAI N(Mandatory) SET GCELLCHMG BASIC(Option al) SET BTSAPMUBP( Optional) SET BTSDPMUBP( SET BTSDPMUBP( Optional) SET GCELLCCCH( Optional) SET GCELLBASIC PARA(Optiona l) SET GCELLCHMG AD(Optional) SET GCELLBASIC PARA(Optiona l) ADD GCELLMAGR P(Optional) ADD BTSRXUCHAI N(Mandatory) ADD GCELL(Option al) ADD BTSRXUCHAI N(Mandatory) HPVTHD Load Power-off Voltage BSC6900 HRATESPT Support Half Rate BSC6900 HRDLDTX HR Use Downlink DTX BSC6900 Load of UL-OL HRIUOLDRATESEL Cells Rate Select ALLOW Allowed BSC6900 The number of the optical port of the main board in the RXU chain or ring. Maximum priority level of an MS that can use reserved channel resources. If the priority level of an MS is greater than this parameter, the MS isto enable the low-priority Whether considered a configuration of power system parameters. In multi-mode scenario, the value of thispower-off voltage threshold. Load parameter in one mode In multi-mode scenario, the value of this parameter in one mode must be the same as the value of the corresponding parameter in Whether to support the half-rate service in this cell. It is one of the cell reselection parameters in system message 3. DTX function Whether the downlink is enabled for half rate (HR) calls. This function is also restricted by the DTX switch in the MSC. If the MSC allowsenable the BSC to for Whether to the downlink DTX assign half or full rate channels to MSs according to the channel seizure ratio in the overlaid and underlaid subcells Whether the uplink DTX function is enabled for HR calls. For details, see GSMsequence number (HSN), Hopping Rec. 05.08. indicating 64 types of frequency hopping sequences. If this parameter is set to 0, the frequency hopping is performed in sequence. Number of the slot where the main board of the RXU chain or ring is located. The slot No. is unique in the samedynamic use of HSNs is Whether BTS. enabled. If the functions of frequency hopping and Flex MAIO are enabled in a cell and the value of this parameter is ON, adjacentNumber of the subrack where the main board of the RXU chain or ring is located. The subrack No. is unique in the same BTS. HRULDTX HR Uplink DTX BSC6900 HSN HSN BSC6900 HSN Head Slot No. BSC6900 HSNSW HSN Modification Switch BSC6900 HSRN Head Subrack No. BSC6900 HT Hop Type High Temperature Critical Point High Temperature Delta Tout High Temperature Shutdown Flag BSC6900 HTCP BSC6900 HTDO BSC6900 ADD BTSBFD(Man Bidirectional Forwarding Detection datory) Hop Type. If the ambient temperature is higher than "High Temperature SET Critical Point", the temperature BTSDHEUBP( control system controls the Optional) difference between the inlet and If the outlet temperature is higher than "High Temperature Critical SET Point" and the difference between BTSDHEUBP( the outlet temperature and ambient Optional) temperature reaches the value of SET BTSAPMUBP( Whether to enable battery powerOptional) off against high temperature. ADD EMU(Optional ) Humidity alarm switch ADD Upper limit of humidity. When the EMU(Optional humidity exceeds the upper limit, a ) humidity alarm is reported. ADD EMU(Optional ) SET BTSAPMUBP( Optional) SET BTSDPMUBP( Optional) SET BTSAPMUBP( Optional) SET BTSDPMUBP( Optional) Lower limit of humidity. When the humidity is lower than the lower limit, a the ambient humidity of the When humidity alarm is reported. APMU is greater than the value of this parameter, the BTS reports an overhigh ambient humidity alarm. In multi-mode scenario, the value When the ambient humidity is greater than the value of this parameter, the BTS reports an overhigh ambient humidity alarm. In multi-mode scenario, the value When the ambient humidity of the APMU is less than the value of this parameter, the BTS reports an overlow ambient humidity alarm. In multi-mode scenario, the value When the ambient humidity is less than the value of this parameter, the BTS reports an overlow ambient humidity alarm. In multi-mode scenario, the value HTSDF BSC6900 HUM_MASK Enable Humidity Alarm Reporting BSC6900 HUM_THD_HIGH Upper Limit of Humidity Alarm BSC6900 HUM_THD_LOW Lower Limit of Humidity Alarm BSC6900 HUMALAMRTHRES Upper Threshold HOLDH of Humidity Alarm BSC6900 HUMALAMRTHRES Upper Threshold HOLDH of Humidity Alarm BSC6900 HUMALAMRTHRES Lower Threshold HOLDL of Humidity Alarm BSC6900 HUMALAMRTHRES Lower Threshold HOLDL of Humidity Alarm BSC6900 HYSON Hysteresis for On BSC6900 SET BTSAIRCON( Delay for which the BTS waits to Optional) switch on the air conditioner IARXTMR Inactive RX timer BSC6900 IASUDURAT Duration BSC6900 IASUPORT Port No. BSC6900 IASUSLCTTMU Transmission Board Type BSC6900 IATXTMR Inactive TX timer BSC6900 IBCA AMR FR IBCAAFRSOFTBLK Soft Block THRD Threshold IBCA AMR HR IBCAAHRSOFTBLK Soft Block THRD Threshold BSC6900 BSC6900 This timer is started after a connection is established SET successfully. If a detection SCCPTMR(O message is not received when this ptional) timer expires, the connection will STR TRANSPERF TST(Mandator y) Duration in IASU mode STR TRANSPERF Port number in IASU mode. For the TST(Mandator BTS3002C, the port number y) cannot be set to "E1PORT3". STR TRANSPERF TST(Mandator Type of the transmission board in y) IASUtimer is started after a This mode connection is established SET successfully. When this timer SCCPTMR(O expires, a detection message will ptional) be sent toC/I ratio that IBCA AMR Minimum the peer end. FR services allow. An idle channel SET can be assigned to such a service GCELLCHMG only when the C/I ratio of the idle AD(Optional) channel isC/I ratio that IBCA AMR Minimum greater than this HR services allow. An idle channel SET can be assigned to such a service GCELLCHMG only when the C/I ratio of the idle AD(Optional) channel is greater than this SET GCELLCHMG Whether to enable the IBCA AD(Optional) algorithm the timer for a new call to Length of wait for the measurement report SET (MR) on the signaling channel GCELLCHMG when dynamic measurement of the AD(Optional) BA2 list is enabled during reports Number of measurement sampled for averaging path loss. A SET single measurement report may not GCELLCHMG reflect the actual network situations AD(Optional) accurately. Therefore, the is When the IBCA algorithm BSC enabled, this parameter is used to SET calculate the actual soft blocking GCELLCHMG threshold of an existing call. The AD(Optional) formula is IBCA algorithm is soft When the as follows: Actual enabled, this parameter is used to SET calculate the target CIR of an GCELLCHMG existing call. The formula is as AD(Optional) follows: Target CIR of an existing IBCAALLOWED IBCA Allowed BSC6900 IBCAASSWAITMEA IBCA Assign SURERPTTIME Waiting Mr Time BSC6900 IBCACALLINFOFILT IBCA Call ERLEN Information Filter BSC6900 IBCA Set-up Call Soft Block Threshold Offset BSC6900 IBCACALLSOFTBL OCKTHOFFSET Target CIR Offset IBCACALLTARGET of IBCA Set-up CIROFFSET Call BSC6900 IBCADLPATHLOSS IBCA Downlink OFF Path Loss Offset BSC6900 IBCA Dyn Measure IBCADYNCMEASUR Neighbour Cell ENCELLALLOWED Flag BSC6900 SET GCELLCHMG AD(Optional) ADD G2GNCELL(O ptional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET OTHSOFTPA RA(Optional) SET GCELLCHMG AD(Optional) IBCAEHOASSWAIT IBCA Urgent HO MEASURERPTTIME Waiting Mr Time BSC6900 IBCAFLEXTSCALLO IBCA Flexible WED TSC Allowed IBCA Forced BTS IBCAFORCEDBTSS Synchronization YNCALLOWED Allowed IBCA FR/EFR IBCAFRSOFTBLKT Soft Block HRD Threshold BSC6900 BSC6900 BSC6900 IBCAHOASSWAITM IBCA HO Waiting EASURERPTTIME Effective Mr Time BSC6900 IBCAHRSOFTBLKT IBCA HR Soft HRD Block Threshold BSC6900 IBCAICDMRELEVO IBCA ICDM Initial FFSET Level Offset BSC6900 IBCA ICDM IBCAICDMSWITCH Switch BSC6900 IBCA Info Report IBCAINBSCINFORP Period Within TPRD BSC BSC6900 IBCA Init. Power IBCAINITPCRXLEV Control DLOFFSET RexLevDL Offset BSC6900 Difference between uplink and downlink path losses, which is used to estimate the downlink path loss of a call when the downlink path loss cannot measure the IBCA Whether to be computed directly neighbor cells of the serving cell dynamically. If the dynamic measurement is enabled, when a call uses a channel,for a BSCto Length of the timer the call sends measure the path loss in the neighboring cell with strong interference of the target cell. The call to be the IBCA flexible TSC Whether handed over needs to function is enabled. When this parameter is set to NO, the flexible TSC function is disabled and the configured TSC is used. When the Whether the IBCA forced BTS synchronization is allowed. When this parameter is set to YES, the synchronization procedure is performed even though the BTSs Minimum C/I ratio that IBCA FR/EFR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle of the timergreater than wait Length channel is for a call to this for other valid MRs after receiving the first valid MR of the target cell if dynamic measurement of the BA2 list is enabledratio that IBCA HR Minimum C/I during handover. services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this the In the ICDM matrix algorithm, signal strength (0-63) is divided into 10 levels. The signal strength that is smaller than or equal to the value of this parameter isthe the initial Whether to enable at ICDM algorithm for the cell. The ICDM algorithm helps to improve the precision in estimating the path loss of an IBCA neighbor cell and Period of information exchange between the BSC boards. The information helps to estimate the C/I ratiospecified offset to the Adds a for the IBCA algorithm. downlink target receive level when power control algorithm III is used to calculate the initial transmit power of a BTS in the IBCA IBCA Init. Power IBCAINITPCRXLEV Control ULOFFSET RexLevUL Offset BSC6900 IBCA Init. Pwr IBCAINITPCRXQUA Ctrl Rx Qual DL LDLOFFSET Offset IBCA Init. Pwr IBCAINITPCRXQUA Ctrl Rx Qual UL LULOFFSET Offset SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) ADD G2GNCELL(O ptional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) BSC6900 BSC6900 IBCAIUOPATHLOS SOFF IBCA IUO Path Loss Offset BSC6900 IBCAMAIOUSMTD IBCA MAIO Using Method BSC6900 IBCA Max. IBCAMAXINTFSRC Interference NUM Source Num. BSC6900 IBCANCELLFLAG IBCA Neighbor Cell Flag IBCA Pathloss Est of Non. MR Ncell BSC6900 IBCANCELLPATHL OSSESTIMATE BSC6900 IBCANEWCALLCIR Target CIR Offset OFFSET of IBCA New Call BSC6900 IBCANHOASSWAIT IBCA Natural HO MEASURERPTTIME Waiting Mr Time BSC6900 IBCA Non IBCANONMEANCEL Measurement LSTATNUM Ncell Stat. Num BSC6900 IBCAOPRREVISEFA Corrected Factor CTOR of IBCA Priority BSC6900 Adds a specified offset to the uplink target receive level when power control algorithm III is used to calculate the initial transmit power of an MS in the IBCA function Adds a specified offset to the downlink target receive quality when power control algorithm III is used to calculate the initial transmit poweraof a BTS in the IBCA uplink Adds specified offset to the target receive quality when power control algorithm III is used to calculate the initial transmit power of an IUOin the IBCA functioncell), MS cell (or a CoBCCH In the path loss of an MS to the serving cell or a neighboring cell measured on the underlay is used together with this parameter to Determines the MAIO selection method for each timeslot. The Optimal MAIO policy selects the optimal MAIO being evaluated, while the Random MAIO policy The IBCA interference evaluation process only considers the interference of the strongest N existing calls on the newlyestablished call being evaluated. Indicates whether this neighboring cell is the IBCA neighboring cell of the serving cell. That is, when a cell is configured as the neighboring cell of the serving cell,level of the Estimates the receive whether the unmeasured IBCA neighboring cells. When a consecutive "IBCA Non Measurement Ncell Stat. Num" measurement reports cover When the IBCA algorithm is enabled, this parameter is used to calculate the target CIR of a new call. The formula is as follows: Target CIR of timer for a call to Length of the a new call = Target measure the path loss in the neighboring cell with strong interference of the target cell. The call to be handed over level of to Estimates the receive needs the unmeasured IBCA neighboring cells. When a consecutive "IBCA Non Measurement Ncell Stat. Num" measurement reports cover When the IBCA algorithm is enabled and the HSN is not 0, the IBCA priority and the SDCCH/PDCH priority are divided by this corrected factor respectively IBCA Info Report IBCAOUTBSCINFO Period Between RPTPRD BSC BSC6900 SET OTHSOFTPA RA(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) ADD G2GNCELL(O ptional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) IBCAPATHLOSSOF IBCA Pathloss F Offset BSC6900 IBCAPLFILTFACTO IBCA Path Lose R Filter Factor BSC6900 IBCARXLEVOFFSE IBCA RxLev T Offset BSC6900 IBCASCELLPATHL OSS IBCA Service Cell Pathloss BSC6900 IBCASOFTBLKSAIC IBCA Soft Block OFF SAIC Offset BSC6900 IBCASOFTBLKSWI IBCA Soft Block TCH Switch IBCA SubChannel IBCASUBCHNHAND Handover OVERALLOWED Allowed IBCA MAIO Target C/I Threshold BSC6900 BSC6900 IBCATARGETCIRT HRSH BSC6900 Specifies a period during which the inter-BSC information exchange must be completed. The information is mainly used by IBCA for C/I the path loss of an MS to a When ratio estimation. neighboring cell cannot be measured based on the existing measurement results, it is estimated based on the path loss Considers the influence of history path loss information during the calculation of the ICDM algorithm path loss. The smaller the filtering coefficient,the receive level of the Estimates the smaller the unmeasured IBCA neighboring cells. When a consecutive "IBCA Non Measurement Ncell Stat. Num" measurement reports cover Use this parameter when the path loss of an MS to serving cells cannot be measured based on the existing measurement results MSs that support SAIC can tolerate a lower carrier-to-interference ratio. This variable indicates the downward adjustment step of the soft blocking threshold of SAIC a Whether to deny the access of call when none of the MAIO evaluation results meets the C/I ratio requirement of the call during channel assignment of the calls Whether the handover on the single channels is allowed (single channels are the two halfrate sub-channels on a timeslot, in which only one is meets occupied Whether a MAIO in the the access requirement. When the C/I ratio of a MAIO is higher than this threshold, the MAIO can be assigned to the call being IBCAUSEDIUOSUB IUO IBCA LAY Allowed IBCA User Dyn IBCAUSRDYNCMEA Measure SURENCELL Neighbor Cell BSC6900 BSC6900 IBCA WAMR FR IBCAWAFRSOFTBL Soft Block KTHRD Threshold BSC6900 SET Whether to enable the IBCA GCELLCHMG algorithm for the overlay and AD(Optional) underlay of single IBCA MS can Whether a an IUO cell dynamically measure the SET neighboring cells. When this GCELLCHMG parameter is set to YES, the AD(Optional) neighboringC/I ratio that "IBCA The lowest cells where can be tolerated by IBCA WAMR FR. The SET C/I ratio of an idle channel must be GCELLCHMG larger than this parameter. AD(Optional) Otherwise, it cannot be assigned. ICBALLOW ICB Allowed BSC6900 ICF Intelligent Control Flag BSC6900 This parameter is used to enable the Intelligent Combiner Bypass (ICB) function on the BCCH TRX of a cell. This parameter specifies whether Whether to enable the intelligent control of the diesel engine. If this SET parameter is set to ENABLE, the BTSAPMUBP( PMU will control the diesel engine Optional) automatically according to the SET GCELLBASIC PARA(Optiona l) ADD IPPATH(Optio nal) SET BSCPSTCDS CPMAP(Optio nal) SET BSCPSTCDS CPMAP(Optio nal) SET BSCPSTCDS CPMAP(Optio nal) ADD SCHTSK(Man datory) SET SCHTSKSW( ICMP packet length. It is the total length of the ICMP packet containing the IP header. DSCP corresponding to the interaction service with the THP level of PRIORITY1 DSCP corresponding to the interaction service with the THP level of PRIORITY2 DSCP corresponding to the interaction service with the THP level of PRIORITY3 ICMPPKGLEN ICMP packet Length BSC6900 ICTHP1DSCP DSCP of PRI.1 INTACT[QoS] BSC6900 ICTHP2DSCP DSCP of PRI.2 INTACT[QoS] BSC6900 ICTHP3DSCP DSCP of PRI.3 INTACT[QoS] BSC6900 ID Task ID BSC6900 Number of the scheduled task ID Task ID BSC6900 STR SCHTSK(Opti onal) Number of the scheduled task ADD BTSBRDCAP( Mandatory) Index This parameter indicates the idle SET code of the A interface. It is used TCPARA(Opti for the interconnection of the A onal) interfaces. SET E1T1LOP(Opti onal) SET GCELLCHMG BASIC(Option al) ID Index BSC6900 Idle_Code Idle Code BSC6900 IDLECODE Idle code BSC6900 IDLESDTHRES Idle SDCCH Threshold N1 BSC6900 IDLE codenumber of idle SDCCH When the channels in a cell is smaller than this parameter, the system searches for available TCHs and transforms them into SDCCH IDTYPE Index Type BSC6900 IDTYPE BTS Index Type BSC6900 IDTYPE Index Type BSC6900 SET BTSEXCURSI ON(Mandatory ) ADD Index type BTSESN(Man datory) SET BSCABISPRI BTS index type ADD GCELLFREQ( Mandatory) ADD GCELLMAGR Type of an index ADD G2GNCELL(M andatory) SET GCELLHOINT ERRATLDB(M andatory) ADD PTPBVC(Man datory) SET GCELLEGPR SET BTSFMUABP( Mandatory) SET BTSNFCBBP( SET BTSSHARING (Mandatory) ADD BTSSFPMOD ADD SEMILINK(Ma ndatory) SET MSTOCELL(M andatory) TST SNDRSI(Man SET PSCELLTOD SP(Mandatory ) IDTYPE Index Type BSC6900 Index type IDTYPE Index Type BSC6900 Type of an index IDTYPE Index Type BSC6900 Subscribers can specify the cell according to the index or the name. Index type of the BTS. BYNAME: query by BTS name; BYID: query by BTS index. IDTYPE Index Type BSC6900 IDTYPE Index Type BSC6900 Index type. BYNAME: query by name; BYID: query by index. IDX Semipermanent Link Index BSC6900 Index of the semipermanent link IDXTYPE Index Type BSC6900 Support the index based on the TLLI and IMSI mode IDXTYPE Index Type BSC6900 IFCBSHAKEHAND If CB Shake Hand BSC6900 Index type, supporting the index based onthe handshake mode. Whether the cell and BSC mechanism is enabled at the Cb ADD interface. Currently, the BSC6900 GCBSADDR( and the CBC communications Optional) through the TCP/IP protocol. Thus, IFNO Outgoing Interface No. BSC6900 ADD BTSIPRT(Man Number of the outgoing interface of datory) a link SET Whether to set the middle BTSRXUBP(O frequency offset to positive offset ptional) or minus offset SET BTSRXUBP(O ptional) STR BTSLOG(Opti onal) ULD BTSLOG(Opti IFOFFSETHIG Positive or Minus Offset BSC6900 IFOFFSETLOW Indication Offset BSC6900 IFREPPRO Report Process Flag Ignore Measurement Report Number BSC6900 IGNOREMRNUM BSC6900 IMEI IMEI BSC6900 IMMASSAINTERFTI IMM ASS A IF MER Creation Timer Immediate Assignment Optimized BSC6900 IMMASSCBB BSC6900 IMMASSDLSHIFT Move Immediate Assignment Down to BTS BSC6900 IMMASSEN TCH Immediate Assignment BSC6900 Max Delay of IMMASSMAXDELAY IMM ASS TIME Retransmit Max Transmit IMMASSMAXSEND Times of IMM NUM ASS BSC6900 BSC6900 Indication offset in the middle frequency offset configuration Whether to report the progress. "NO" indicates that the progress is not reported. "YES" indicates that the progress is reported. Number of invalid measurement reports allowed when the BSC6900 SET filters the measurement reports. GCELLHOFA When the number of received ST(Optional) measurement reports is no larger CHK INNSPCH(Ma ndatory) STR CALLRESLOP Value of an IMEI Timer for the BSC6900 waiting for SET a CC message after sending a CR GCELLTMR( message. If the timer expires, the Optional) seized SDCCH is released. The channel activation and SET immediate assignment messages GCELLBASIC are sent at the same time to PARA(Optiona accelerate the signaling l) processing, thus increasing the This parameter specifies whether SET to support the takeover of the GCELLPSOT packet immediate assignment by HERPARA(Op the BTS. It is relative to the uplink tional) immediate assignment. To improve Whether to allow immediate TCH SET assignment. If this parameter is set GCELLBASIC to YES, the BSC can assign a TCH PARA(Optiona immediately when there is no l) available SDCCH for in channel Maximum time delay a resending an immediate assignment SET message. Within the period GCELLCCTM specified by this parameter, an R(Optional) immediatenumber of message Maximum assignment retransmissions of an immediate SET assignment message. When the GCELLCCTM value of this parameter is reached, R(Optional) the immediate assignment IMMASSRESENDE N Use IMM ASS Retransmit Parameter BSC6900 IMMASSTAALLOW TA Pref. of ImmeAssign Allowed BSC6900 TA Threshold of Imme-Assign Pref IMMASSTATHRES BSC6900 Whether the BSC6900 sends SET immediate assignment GCELLCCTM retransmission parameters to the R(Optional) BTS Whether to assign channels according to the access_delay SET value in channel request messages GCELLHOIUO during immediate channel (Optional) assignment When the access_delay value in the channel request message is SET smaller than this parameter, the GCELLHOIUO overlay channels are assigned (Optional) preferentially; otherwise, the ADD AISSCFG(Opti Whether to adjust the offset time onal) immediately afterthe Wait Indication Timer carried by the BTS is reset information element when the SET BSC6900 sends an immediate GCELLTMR( assignment reject message to an Optional) MS. CHK INNSPCH(Ma ndatory) STR CALLRESLOP Value of an IMSI SET MSTOCELL(M andatory) International mobile subscriber TST identity of the MS. IMSI containing SNDRSI(Man the number 0 BSC6900 waiting for Timer for the to 9. a handover complete message SET after sending a handover request GCELLTMR( acknowledgment message in Optional) 2G/3G handover or inter-BSC Threshold for fine tuning the BTS ADD clock. If the offset of the BTS clock AISSCFG(Opti is smaller than the threshold, no onal) fine tuning is performed. ADD AISSCFG(Opti onal) Fine tuning period in the BSC major Included angle formed by the lobe azimuths of the antennas in SET two cells under one BTS. A major GCELLLCS(O lobe azimuth is measured from the ptional) due north to the direction of the cell ADD BTSCONNEC Number of the in-port cabinet on a T(Optional) BTS IMMFNAD Immediate Initial Adjust After Site Reset Enable BSC6900 IMMREJWAITINDTI MER T3122 BSC6900 IMSI IMSI BSC6900 IMSI IMSI BSC6900 INBSCHOTIMER T3121 BSC6900 INCHLOD Fine Tuning Threshold BSC6900 INCHPRD Fine Tuning Period in BSC BSC6900 INCLUDEANG Included Angle BSC6900 INCN In Port Cabinet No. BSC6900 INDEN3 Independent E1 Port 3 BSC6900 SET BTSDOMUBP (Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOBA SIC(Optional) INFHHOLAST Intracell F-H HO Last Time BSC6900 INFHHOSTAT Intracell F-H HO Stat Time BSC6900 Whether to separate E1 from other optical fibers for the use of other devices. If this parameter is set to YES, other BTSs can connect to the BSC6900 through the F-H The triggering of intra-cell handovers must meet the P/N criteria, that is, when the condition for intra-cell F-H handovers is met for Ptriggering during N seconds, The seconds of intra-cell F-H handovers must meet the P/N criteria, that is, when the condition for intra-cell F-H handovers is met for P seconds during N seconds, INFOEXCHGLIST Info Exchange Content BSC6900 ADD GNRNC(Mand Information exchange content to be atory) supported ADD EMU(Optional ) Infrared alarm switch currently For an AMR call, if the occupied channel is a full rate SET channel and the Radio Quality GCELLHOBA Indication (RQI) is always higher SIC(Optional) thanan AMR call, if set by this For the threshold the currently occupied channel is a half rate SET channel and the Radio Quality GCELLHOBA Indication (RQI) is always lower SIC(Optional) than the threshold set by this Power overload threshold for triggering incoming handover to the SET TRX under the prerequisite that the GTRXDEV(Op power amplifier of the TRX tional) provides the maximum output Initial coding mode used for full rate AMR calls. The four values 0, SET 1, 2, and 3 of this parameter GCELLCCAM respectively represent the lowest, R(Optional) low, high, and highest coding rates Initial coding mode used for half rate AMR calls. The four values 0, SET 1, 2, and 3 of this parameter GCELLCCAM respectively represent the lowest, R(Optional) low, high, and highest coding rates Initial coding mode used for broadband AMR calls. The three SET values 0, 1 and 2 of this parameter GCELLCCAM respectively represent the lowest, R(Optional) low and highest coding rates in the ADD SEMILINK(Op Specifies the timeslot mask in tional) BSC6900 Infrared alarm INFRA_RED_MASK switch BSC6900 INHOF2HTH F2H HO Threshold BSC6900 INHOH2FTH H2F HO Threshold BSC6900 Power Overload INHOPWROVERLO Threshold In Ho. ADTHRESHOLD In BSC6900 INITCDMDF AMR Starting Mode[F] BSC6900 INITCDMDH AMR Starting Mode[H] BSC6900 INITCDMDWB AMR Starting Mode[WB] BSC6900 INMASK In BSC Mask BSC6900 INNASSOPTEN OL Subcell Assignment Optimization BSC6900 INNCELLEDGEHOE Inner Cell EDGE N HO Enable BSC6900 SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) Whether to assign channel requests in the overlay subcell to the underlay subcell according to "UL Subcell Lower Load Threshold". If the load of the Whether to allow underlay-tooverlay edge handovers INNCELLID BSC Inner Cell Index BSC6900 ADD EXTNCELL(M andatory) Index of the cell in the BSC ADD EXTNCELL(M andatory) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) INNCELLNAME BSC Inner Cell Name Load HO of OL Subcell to UL Subcell BSC6900 Name of the cell in the BSC INNLOADHOEN BSC6900 INNLOADHOPERI OL Subcell Load Diversity HO Period BSC6900 Step Length of OL Subcell Load HO BSC6900 Whether to allow underlay-tooverlay load handovers Overlay-to-underlay load handovers are performed by levels. This parameter indicates the duration of each level. Level step during overlay-tounderlay hierarchical load handovers In an enhanced dual-band network, if the load of the overlay subcell is higher than this parameter, the system cannot initiate an underlayto-overlay handover. INNLOADHOSTEP INNSERIOVERLDT HRED Inner Cell Serious OverLoad Thred BSC6900 INPN In BSC Port No. BSC6900 ADD SEMILINK(Ma ndatory) Incoming BSC6900 port number ADD BTSCONNEC T(Mandatory) Number of a BTS port ADD DXXTSEXGR ELATION(Man datory) In-port number of a DXX SET GCELLLCS(O Mode of inputting the latitude and ptional) longitude of a cell location INPN BTS In Port No. BSC6900 INPORTNO DXX In Port No. Latitude and Longitude Input Mode BSC6900 INPUTMD BSC6900 INRBSCSDHOEN Inter-BSC SDCCH HO ALLowed BSC6900 SET GCELLHOCT Whether to allow inter-BSC RL(Optional) SDCCH handovers ADD SEMILINK(Ma ndatory) Incoming BSC6900 slot number ADD BTSCONNEC T(Optional) Number of the in-port slot on a BTS ADD SEMILINK(Ma Incoming BSC6900 subrack ndatory) number ADD BTSCONNEC Number of the in-port subrack on a T(Optional) BTS ADD GSMSCB(Ma Time interval for sending a simple ndatory) cell broadcast message the Hysteresis value during handovers between cells on ADD different layers or of different G2GNCELL(O priorities. This value is used to ptional) suppress inter-layer ping-pong Type of an interference band SET statistics algorithm used when the GCELLSOFT( frequency scanning function is Optional) enabled Reduces ping-pong handovers ADD between cells on a same layer. G2GNCELL(O This parameter is invalid when ptional) cells are on different layers. SET Specifies an interval between two GCELLHOFIT consecutive interference PEN(Optional) handovers The triggering of interference handovers must meet the P/N SET criteria, that is, when P out of N GCELLHOBA measurement reports meet the SIC(Optional) condition for interference The triggering of interference handovers must meet the P/N SET criteria, that is, when P out of N GCELLHOBA measurement reports meet the SIC(Optional) condition for interference INSN In BSC Slot No. BSC6900 INSN In Port Slot No. BSC6900 INSRN In BSC Subrack No. BSC6900 INSRN In Port Subrack No. BSC6900 INT Broadcast Interval Adjacent Cell Inter-layer HO Hysteresis BSC6900 INTELEVHOHYST BSC6900 Interfere Band INTERBANDSTATA Stat Algorithm LGO Type BSC6900 INTERCELLHYST Inter-cell HO Hysteresis BSC6900 INTERFEREHOPEN Penalty Time on TIME Interfere HO BSC6900 INTERFERELASTTI Interfere HO ME Valid Time BSC6900 INTERFERESTATTI Interfere HO ME Static Time BSC6900 INTERFHOEN Interference HO Allowed BSC6900 Whether to allow the interference handover algorithm. Interference SET handovers are triggered when the GCELLHOBA receive level is higher than the SIC(Optional) receive threshold while the transmit SET GCELLCHMG AD(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) ADD AISSCFG(Opti onal) SET GCELLOTHE XT(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOINT ERRATLDB(O ptional) Whether to consider interference priorities during channel assignment Threshold used for interference measurement. The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates Threshold used for interference measurement. The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates Threshold used for interference measurement. The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates Threshold used for interference measurement. The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates Threshold used for interference measurement. The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates Threshold used for interference measurement. The BSS measures the uplink quality of the radio channels occupiedthe MSs, for calculates Value of by timer and synchronization between BSCs. If a BSC fails to synchronize with the control BSC before the timer expires, the BSC starts to Period during which interference levels are averaged. The interference levels on idle channels are averaged before the BTS sends a radio resource indication This parameter specifies whether the reselection from 2G cells to 3G cells is allowed. Threshold for setting the flag of accepting inter-RAT CS service handover of a 2G cell INTERFPRIALLOW Interf. Priority Allowed BSC6900 INTERFTHRES0 Interference Band Threshold 0 BSC6900 INTERFTHRES1 Interference Band Threshold 1 BSC6900 INTERFTHRES2 Interference Band Threshold 2 BSC6900 INTERFTHRES3 Interference Band Threshold 3 BSC6900 INTERFTHRES4 Interference Band Threshold 4 BSC6900 Interference INTERFTHRES5 Band Threshold 5 BSC6900 BSC Interior Clock INTERIORSYNCTM Synchronize R Protect Time BSC6900 Interference Calculation Period INTERPERIOD BSC6900 Inter-RAT Cell INTERRATCELLRE Reselection SELEN Enable BSC6900 Inter-RAT CS InterRatCsServiceLo Service HO Load adHoThrd Threshold BSC6900 INTERRATINBSCH OEN Inter-RAT In BSC Handover Enable BSC6900 Inter-RAT Load InterRATLoadHoEcN HO Bandwidth oBandWidth [EcNo] BSC6900 Inter-RAT Load InterRATLoadHoEcN HO EcNo at Start oStart Point BSC6900 Inter-RAT InterRATLoadHoEcN Hierarchy Load oStep HO Step [EcNo] Inter-RAT Load InterRATLoadHoRS HO Bandwidth CPBandWidth [RSCP] Inter-RAT Load InterRATLoadHoRS HO RSCP at CPStart Start Point BSC6900 BSC6900 BSC6900 Inter-RAT InterRATLoadHoRS Hierarchy Load CPStep HO Step [RSCP] BSC6900 Inter-RAT Out INTERRATOUTBSC BSC Handover HOEN Enable Allow Inter-RAT InterRatServiceLoad Load HO in HoSwitch Access State SET GCELLHOBA SIC(Optional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOBA SIC(Optional) SET GCELLHOINT ERRATLDB(O ptional) This parameter specifies whether the handover from 3G cells to 2G cells is allowed. Width of load band [EcNo] during the inter-RAT hierarchical loadbased handover Initial EcNo value of the inter-RAT load-based handover band Step of changing the EcNo value during the inter-RAT hierarchical load-based handover Width of load band [RSCP] during the inter-RAT hierarchical loadbased handover Initial RSCP value of the inter-RAT load-based handover band Step of changing the RSCP value during the inter-RAT hierarchical load-based handover BSC6900 BSC6900 INTERVAL Relative Time BSC6900 INTERVAL Send PKT Interval[s] BSC6900 INTFREQUENCY Interference Frequency BSC6900 This parameter specifies whether the handover from 2G cells to 3G cells isthis parameter is set to When allowed. Service-based, the inter-RAT handover is triggered on the basis of the service distribution. In this case, the target cell is selected Time span before the command is executed. The logs generated EXP within the time span are to be LOG(Optional) exported. STR ETHOAMLOO PTST(Optiona Interval for sending packets to test l) Ethernet OAM loop SET GCELLEXTM Frequency index of the interference SRPARA(Opti measurement in type 3 of an onal) extension measurement report Incoming OL INTOINNREXLEVTH Subcell HO Level RED TH BSC6900 SET GCELLHOED BPARA(Optio nal) SET GCELLTMR( Optional) SET GCELLTMR( Optional) INTRABSCCODECH OCMDTIMER T25 BSC6900 INTRABSCHOTIME R T3103A BSC6900 Lower threshold of the overlay level during underlay-to-overlay handovers. When the receive level of an MS is higher than this threshold, is used to set the time The timer the MS can be switched when the BSC6900 waits for an Internal Handover Command message after a Internal Handover Required message thereported in Timer started after is BSC6900 delivers a handover command in an intra-BSC inter-cell handover. If the BSC6900 receives a handover complete message before this INTRACELLFHHOE Intracell F-H HO N Allowed BSC6900 SET Whether to allow AMR handovers. GCELLHOBA This parameter has no impact on SIC(Optional) dynamic non-AMR F-H handovers. SET GCELLHOBA Whether to allow intra-cell SIC(Optional) handovers Timer started after the BSC6900 delivers a handover command in SET an intra-BSC intra-cell handover. If GCELLTMR( the BSC6900 receives a handover Optional) complete message before this ADD GNRNC(Mand atory) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLHOINT ERRATLDB(O ptional) INTRACELLHOEN Intracell HO Allowed BSC6900 INTRACELLHOTIME R T3103C BSC6900 INTRAMBSC Co-MBSC BSC6900 Whether it is an RNC under the same MBIC in GU mode Minimum Ec/No value of a 3G cell during the load-based GSM-toUMTS the load of a cell is greater When handover than or equal to Load HO Threshold, all the calls in the serving cell send handover requests simultaneously. Thus, the Minimum RSCP value of a 3G cell during the load-based GSM-toUMTS handover Inter-RAT Load IntRATLoadHOEcNo HO EcNo Thr Threshold BSC6900 Inter-RAT IntRATLoadHoPerio Hierarchical Load d HO Period BSC6900 Inter-RAT Load IntRATLoadHORSC HO RSCP PThr Threshold BSC6900 INTSN In BSC Start Timeslot No. BSC6900 INTSNO DXX In Time Slot No. BSC6900 ADD SEMILINK(Ma Incoming BSC6900 start timeslot ndatory) number ADD DXXTSEXGR ELATION(Man datory) Number of a DXX In-timeslot INTV Time Interval OMU Automatic Switchover Interval BSC6900 INTV BSC6900 INVALBSICEN Invalid BSIC Reporting BSC6900 Interval for executing the scheduled subtask. If the time ADD mode is set to "DAILY_C", SUBTSK(Opti "WEEKLY_C", or "MONTHLY_C", onal) you shouldswitchover interval. This Automatic set this parameter. parameter needs to be set only SET when "OMU automatic switchover ASWPARA(M switch" is set to "ON". The andatory) minimum automatic switchover SET GCELLCCUT Whether a measurement report RANSYS(Opti can contain the information about a onal) cell with an invalid BSIC ADD XPUVLAN(Ma ndatory) IP address EXP LOG(Optional) ADD SNTPSRVINF O(Mandatory) IP address of the server ADD NSVLLOCAL( Mandatory) IP address of the local NSVL ADD NSVLREMOT E(Mandatory) IP address of the remote NSVL SET BTSETHPOR T(Optional) DLD RETANTCFG( Mandatory) ULD BTSDEVFILE( IP address of a BTS port. It cannot be the same as any IP address configured in the BSC6900. IP address of the FTP server. When the FTPServer.exe file is downloaded through the FTP Tool button on the LMT, the address of the FTP server is the same as that The local IP address must be the ADD configured IP address (including IPPATH(Mand the IP address and port address of atory) the interface board). ADD DEVIP(Manda tory) IP address of the board ADD ETHIP(Manda Local IP address of the Ethernet tory) port IP IP Address BSC6900 IP IP Address BSC6900 IP Local IP Address BSC6900 IP Remote IP Address BSC6900 IP Physical IP BSC6900 IP FTPServer IP BSC6900 IPADDR Local IP address BSC6900 IPADDR IP address BSC6900 IPADDR Local IP address BSC6900 IPADDR Packet source IP address BSC6900 ADD ICMPGUARD( Source IP address of the packet for Mandatory) preventing the ICMP attack ADD VLANID(Mand atory) IP address of the next hop ADD ETHTRKIP(M Local IP address of the andatory) aggregation group ADD SGSNROUTE INFO(Mandat ory) IP address of the router ADD SGSN(Mandat ory) SET BTSIPCLKPA RA(Mandatory ) ADD SGSN(Option al) SET BTSIPCLKPA RA(Mandatory ) IPADDR Next Hop IP address. BSC6900 IPADDR Local IP address BSC6900 IPADDR IP Address BSC6900 IPADDR1 IP Address1 Master Clock Server IP Address BSC6900 IPADDR1 BSC6900 First IP address of the SGSN It must be the valid address of the A, B, or C type and cannot be the broadcast address or network address. IPADDR2 IP Address2 Slave Clock Server IP Address BSC6900 IPADDR2 BSC6900 Second IP address of the SGSN It must be the valid address of the A, B, or C type and cannot be the broadcast address or network address. IPADDR3 IP Address3 BSC6900 ADD SGSN(Option al) Third IP address of the SGSN ADD SGSN(Option al) SET BTSETHPOR T(Optional) ADD BTSPPPLNK( SET BTSETHPOR T(Optional) ADD BTSPPPLNK( IPADDR4 IP Address4 BSC6900 IPEAAT IP Frame Error Alarm Threshold BSC6900 IP Frame Error Alarm Clearance Threshold BSC6900 IPEADT Fourth IP address of the SGSN When the number of error frames on the IP layer reaches the value of this parameter, the frame error alarm is generated. When the number of error frames on the IP layer decreases to the value of this parameter, the frame error alarm is cleared. IPHC Head compress BSC6900 ADD PPPLNK(Opti Whether to compress the packet onal) headers ADD MPGRP(Optio Whether to compress the IP nal) header of a MP group ADD ETHIP(Manda IP address index of the Ethernet tory) port ADD ETHTRKIP(M IP address index of the andatory) aggregation group ADD IPMUX(Option al) IP packet multiplex index IPHC Head compress BSC6900 IPINDEX IP address index BSC6900 IPINDEX IP address index BSC6900 IPMUXINDEX IP MUX Index BSC6900 IP Phy Trans IPPHYTRANSTYPE Type BSC6900 ADD Type of the physical IP BTS(Optional) transmission medium ADD BTSAUTOPL Type of IP physical transmission AN(Optional) cable medium, E1 or FE/GE. Whether to enable the heater. In multi-mode scenario, the value SET of this parameter in one mode BTSDHEUBP( must be the same as the value of Optional) the corresponding parameter in ADD AISSCFG(Ma Whether the BSC is a reference ndatory) BSC ADD G2GNCELL(O ptional) SET BTSIPCLKPA RA(Mandatory ) SET BTSIPCLKPA RA(Mandatory ) IP Physical Tran. IPPHYTRANSTYPE Type BSC6900 ISADDEDTMPCONT DHEU Heater ROL Control Allowed BSC6900 ISBASICBSC Base BSC BSC6900 ISCHAINNCELL Chain Neighbor Cell BSC6900 Whether the cell is a chain neighboring cell ISCLKREDUCY Clock Server Redundancy BSC6900 Whether to support clock server redundancy configuration Clock Server ISCLKREDUCYBAK Redundancy BSC6900 Whether to support clock server redundancy configuration ISCONFIGEDRING Config Ring Is Configure Check Threadhold BSC6900 ISCONFIGTHD BSC6900 Whether to enable the BTS to ADD support ring networking. IP BTS do BTS(Optional) not support this parameter. If this parameter is set to "YES", the check threshold for a specific ADD board is used. In this case, the BTSRXUBRD( following paramters are involved: Optional) Forward Bandwidth, Receive ADD A service support attribute of a cell, GEXT2GCEL that is, whether an external GSM L(Optional) cell supports EDGE ADD RSCGRP(Man Whether to indicate the first class datory) transport resource group ADD A service support attribute of a cell, GEXT2GCEL that is, whether an external GSM L(Optional) cell supports GPRS ADD GTRX(Option Whether to enable the TRX to carry al) the main BCCH in the cell SET BSCBASIC(M Whether a BSC in the TC pool is andatory) the primary BSC Whether this location group is the main location group. If the value is ADD Yes, this location group is the main BTSLOCGRP( location group. If the value is No, Mandatory) this location group is the slave ADD A service support attribute of a cell, GEXT2GCEL that is, whether an external GSM L(Optional) cell supports NC2 of the IP Configuration mode subnetwork. Static configuration: fixed local NSVL and remote NSVL ADD parameters through manual NSE(Optional) configuration; Dynamic ADD IPMUX(Manda tory) Whether it is QOSPATH ADD Whether the Um interface software AISSCFG(Ma synchronization between BSCs is ndatory) supported ISEDGESUPPORT EDGE Support in External Neighbour Cell BSC6900 Is First Class Transport Resource Group BSC6900 GPRS Support in External Neighbour Cell BSC6900 ISFIRSTCLASS ISGPRSSUPPORT ISMAINBCCH Is Main BCCH TRX BSC6900 IsMainBSC Is Main BSC BSC6900 ISMAINLOCGRP Is Main Local Group NC2 Support in External Neighbour Cell BSC6900 ISNC2SUPPORT BSC6900 ISNCMODE Subnetwork Configure Mode BSC6900 ISQOSPATH IS QOSPATH BSC6900 ISSPTBSCAISS Support BSC AISS BSC6900 ISSPTDEMUS Demu Configure Information BSC6900 SET BTSENVALM( Whether multiple DEMUs are Mandatory) configured SET BTSOTHPAR A(Optional) ISSUPERBTS Whether to enable the BTS to support local switching SET If the BTS supports local switching, BTSLSW(Opti when the calling and called MSs onal) are both within the BTS or BTS SET BSCBASIC(O Whether to support the TC pool ptional) function it is a TC board.If the Whether board is for the TC subrack, set the ADD parameter to YES. BRD(Mandato If the board is not for the TC ry) subrack, set the parameter to NO. ADD SUBRACK(Op Whether the subrack is a remote tional) main TC subrack the temperature Whether to control difference between the air inlet and SET air outlet and that between the air BTSDHEUBP( outlet and ambient by the Optional) temperatureconfigure the Whether to control system. transmission cabinet. The BTS SET uses this parameter to calculate BTSPSUFP(O the number of TRXs to be shut ptional) down. SET GCELLIDLEF DDBA1(Mand atory) Number of a row to be changed in SET a BA list Reserved parameter for cells. SET There are 30 parameters of this GCELLREV(M type, which can be used as new andatory) parameters in later versions. SET GCELLIDLEF DDBA1(Mand atory) SET Used for parameter control SET GCELLREV(M Value of a reserved parameter for andatory) cells ISSUPERBTS Is Supper BTS BSC6900 ISSUPPORTBTSLS Support BTS WITCH Local Switch BSC6900 IsSupportTcPool Is Support Tc Pool BSC6900 ISTCBRD TC board BSC6900 ISTCCENTRAL Remote TC Central DHEU Temperature Control BSC6900 ISTMPCTRL BSC6900 ISTRANCABCON Tran. Cabinet Configured BSC6900 ITEM NCCELL No. BSC6900 ITEMINDEX Item Index BSC6900 ITEMVALID Item Valid BSC6900 ITEMVALUE Value BSC6900 ITFT Interface Type BSC6900 ITFType Interface Type BSC6900 IUO IUOCHNTRAN Concentric Attribute BSC6900 Dynamic Channel Conversion Parameter of Concentric Cell BSC6900 ADD IPPATH(Mand atory) ADD ADJMAP(Man Type of the adjacent node is interface. This determined by the type of the ADD protocol currently used by the BTS. BTSIPRT(Man Point-to-Point Protocol (PPP) is a datory) data link protocol. Multilink PPP If Concentric cell attributes of TRX. the cell where a TRX is located is SET configured as a concentric cell, set GTRXIUO(Ma this parameter to OVERLAID or ndatory) UNDERLAID as required. If the cell SET GCELLPSCH Conversion policy of the dynamic M(Optional) channel of the of concentric circle The triggering concentric cell handovers must meet the P/N SET criteria, that is, when P out of N GCELLHOIUO measurement reports meet the (Optional) condition for concentric circle The triggering of concentric circle handovers must meet the P/N SET criteria, that is, when P out of N GCELLHOIUO measurement reports meet the (Optional) condition a cell is a normal cell, Whether for concentric circle concentric cell, or enhanced dual ADD band network cell. GCELL(Option In a concentric cell, the coverage al) areas of different TRXs form IUOHODURATIME UO HO Valid Time BSC6900 IUOHOSTATIME UO HO Watch Time BSC6900 IUOTP Cell IUO Type J0 trace mismatch alarm switch BSC6900 J0ALMSWITCH BSC6900 SET Switch for the J0 tracing mark OPT(Optional) mismatching alarm SET OPT(Mandato ry) Byte display format value of J0. J0 Expected receiving of J0 byte, also called the trace byte of the regenerator section on the SET optical port (RTIM), is one of the OPT(Optional) optical port interconnection also Sending value of J0. J0 byte, called the trace byte of the regenerator section on the optical SET port (RTIM), is one of the optical OPT(Optional) port interconnection parameters J0BYTE_FORMAT J0 Byte Format BSC6900 J0RXVALUE J0 expected incept value BSC6900 J0TXVALUE J0 transmit value BSC6900 J0TYPE J0 type BSC6900 SET OPT(Optional) J0 type J1ALMSWITCH J1 trace mismatch alarm switch BSC6900 SET Switch for the J1 tracing mark OPT(Optional) mismatching alarm SET OPT(Mandato ry) Byte display format value of J1. J1 Expected receiving of J1 byte, also called the trace byte of the high-order path on the optical SET port, is one of the optical port OPT(Optional) interconnectionof J1. J1 byte,The Sending value parameters. also called the trace byte of the highorder path on the optical port, is SET one of the optical port OPT(Optional) interconnection parameters J1BYTE_FORMAT J1 Byte Format BSC6900 J1RXVALUE J1 expected incept value BSC6900 J1TXVALUE J1 transmit value BSC6900 J1TYPE J1 type BSC6900 SET OPT(Optional) J1 type SET COPTLNK(Op Switch for the J2 tracing mark tional) mismatching alarm SET COPTLNK(Op tional) Byte display format of J2 SET COPTLNK(Op tional) Byte length of J2 SET COPTLNK(Op tional) Expected receiving value of J2 SET COPTLNK(Op tional) SET OPT(Optional) SET COPTLNK(Op tional) J2ALMSWITCH J2 mismatch alarm switch BSC6900 J2BYTE_FORMAT J2 Byte Format BSC6900 J2MODE J2 length BSC6900 J2RXVALUE J2 expected incept value BSC6900 J2TXVALUE J2 transmit value BSC6900 JAUTOADD Automatic Append J Byte BSC6900 JBF LAPD Jitter Buffer Algorithm BSC6900 Sending value of J2 A zero or a space used to fill in the J byte of the optical port based on the J byte of the peer equipment. If the J bytes are inconsistent, an alarm related to J byte mismatch Whether to enable the LAPD Jitter Buffer algorithm. This algorithm SET adds a buffering adaptation layer BTSJBF(Mand under the LAPD layer at the atory) receiving end. The function at this JITBUFDELAY PS Jitter Buffer Delay BSC6900 Default receive delay of the PS Jitter Buffer on the BTS. A greater SET value of this parameter indicates a BTSOTHPAR longer end-to-end delay for the PS A(Optional) service. SET OTHSOFTPA Whether the LAPD Jitter Buffer is RA(Optional) enabled on the BSC side Determines whether the last three SET bits of K2 indicates the single end MSP(Optional) and the dual end sequencing. To K offset used in K reduce ping-pong handovers, the SET system performs K sorting based GCELLHOAD( on the downlink receive level of the Optional) candidate cells. But before doing ADD PPPLNK(Opti onal) ADD Duration of the PPP/MP link keepMPLNK(Optio alive timer ADD Location area code (LAC). MSs GCELL(Mand can freely move in the local atory) location area with no need of ADD location update. Reasonable local GEXT2GCEL allocationarea code (LAC). The MS Location can effectively lighten the SET can move within the local location BTSAUTOPL area without location update. The ANCFG(Optio reasonable classification of the nal) location areamode. When this for Aggregation is very important parameter is set to static ADD aggregation, the LACP protocol is ETHTRK(Man activated; otherwise, the LACP datory) protocol is deactivated. SET Decimal value when the latitude GCELLLCS(M where a cell is located is indicated andatory) in the format of degree SET Decimal value when the longitude GCELLLCS(M where a cell is located is indicated andatory) in the format of degree SET Integer value when the latitude GCELLLCS(M where a cell is located is indicated andatory) in the format of degree SET Value of the minute part when the GCELLLCS(M latitude is indicated in the format of andatory) degree_minute_second JITBUFSWITCH Jitter Buffer switch BSC6900 K2MODE K2 Mode BSC6900 KBIAS K Bias BSC6900 KEEPALIVE Keep-alive timer length[S] BSC6900 LAC Cell LAC BSC6900 LAC1 Cell LAC BSC6900 LACPMODE Aggregation Mode BSC6900 LATIDECI Latitude Decimal Part BSC6900 LATIDEGREE Latitude Degree Part BSC6900 LATIINT Latitude Int Part BSC6900 LATIMINUTE Latitude Minute Part BSC6900 LATISECONDDECI Latitude Second Decimal Part BSC6900 SET Decimal value of the second part GCELLLCS(M when the latitude is indicated in the andatory) format of degree_minute_second SET Integer value of the second part GCELLLCS(M when the latitude is indicated in the andatory) format of degree_minute_second ADD GPS(Mandato Longitude of the GPS receiver ry) antenna ADD GPS(Mandato Longitude of the GPS receiver ry) antenna Delay statistics period. This parameter indicates the period to ADD collect the statistics information IPLOGICPOR about the link transmission delay. T(Optional) Note thatof delay adjustment Number the unit of this parameter suspension periods. This ADD parameter specifies the delay IPLOGICPOR statistics periods in which the T(Optional) bandwidth is not adjusted when the Bandwidth reduction delay threshold. This parameter is used ADD to trigger the function of bandwidth IPLOGICPOR reduction at the logical port when T(Optional) the link delay exceeds the value of ADD IPLOGICPOR Average delay reduction filtering T(Optional) index ADD IPLOGICPOR T(Optional) SET GCELLBASIC PARA(Optiona l) LATISECONDINT Latitude Second Int Part BSC6900 LATITUDE GPS antenna latitude BSC6900 LATITUDESEC GPS antenna latitude BSC6900 LATPRD Delay measure period [100ms] Delay adjust suspend period [LATTH] Rate down threshold for delay [ms] average delay down filter mantissa BSC6900 LATSUSTM BSC6900 LATTH BSC6900 LATUDK BSC6900 LATUPK average delay up filter mantissa BSC6900 LAYER Layer of The Cell BSC6900 LAYER Layer of the cell BSC6900 LBCongestProtect1 Lb Congestion Protection Timer 1 BSC6900 Average delay increase filtering index where a cell is located. The Layer network designed by Huawei has four layers: Umbrella (layer 4), Macro (layer 3), Micro (layer 2), and Pico(layer 1). Each layerof four A network basically consists can layers, namely, Umbrella, Macro, ADD Micro, and Pico. Cell priorities GEXT2GCEL influence the sorting of neighboring L(Optional) cells during handovers as well as Timer of increasing the Lb flow control level when the BSC ADD receives an SMLC congestion GEXTSMLC( indication. If the BSC receives Optional) another SMLC congestion LBCongestProtect2 Lb Congestion Protection Timer 2 BSC6900 ADD GEXTSMLC( Optional) Timer of decreasing the Lb flow control level. If no SMLC congestion indication is received within the valid period of the timer, the BSC decreases the flow control LDRFOUH LDR Fourth BSC6900 SET LDR(Optional) Fourth action taken for load control LDRFST LDR First BSC6900 SET LDR(Optional) First action taken for load control LDRSND LDR Second BSC6900 LENO Local entity No. BSC6900 SET LDR(Optional) ADD M3LE(Mandat ory) ADD M3DE(Mandat Second action taken for load control The local entity number uniquely identifies a local entity. LEVEL Log Level BSC6900 EXP LOG(Optional) Level of the log LEVEL Log Level BSC6900 COL LOG(Optional) Log level to be collected. SET ALMML(Mand atory) alarm mask switch. ADD ETHMD(Optio nal) Class of the maintenance domain SET GCELLBASIC PARA(Optiona Whether to support the reporting of l) the main to allow inter-layer and Whether diversity level inter-level handovers. The interSET layer and inter-level handover GCELLHOBA algorithm is achieved through the SIC(Optional) setting of different layers and Hysteresis value during the handovers between cells on SET different layers or of different GCELLHOBA priorities. This value is used to SIC(Optional) suppress inter-layer ping-pong LEVEL Alarm Mask Switch BSC6900 Level MD LEVEL BSC6900 LEVELRPT Level Report Switch BSC6900 LEVHOEN Level HO Allowed BSC6900 LEVHOHYST Inter-layer HO Hysteresis BSC6900 LEVLAST Layer HO Valid Time BSC6900 LEVSTAT Layer HO Watch Time BSC6900 LGCAPPTYPE Logical function type BSC6900 LGCAPPTYPE Logical function type BSC6900 LGCAPPTYPE Logic function type BSC6900 The triggering of inter-layer handovers must meet the P/N ADD criteria, that is, when the condition G2GNCELL(O for inter-layer handovers is met for ptional) a consecutive P seconds during N The triggering of inter-layer handovers must meet the P/N ADD criteria, that is, when the condition G2GNCELL(O for inter-layer handovers is met for ptional) a consecutive P type of the board Logical function seconds during N OAM:Operation And Maintenance Process ADD TDM_Switching:TDM switching BRD(Optional) process CON PATCH(Optio nal) LOD PATCH(Optio Logical function type of the board ADD PPPLNK(Man datory) ADD MPGRP(Mand Logical function type LGCUSAGETYPE Application type of POUc_TDM BSC6900 ADD Application type of the POUc_TDM BRD(Optional) board ADD PBSL(Optiona The Logical Index of PB signaling l) link humidity threshold for the Lower environment alarm box to report an SET alarm indicating that the ambient BTSEXD(Opti humidity is too low. If the ambient onal) humidity of the BTS is lower than SET The occur threshold of 20258 LICALMTHD( alarm,you can set it from 90% to Mandatory) 99% SET The recover threshold of 20258 LICALMTHD( alarm,you can set it from 90% to Mandatory) 99% LOP LAPDLNK(Ma ndatory) EXP GCELLTEMP LATE(Optional ) LGIDX PbSL Logical Index BSC6900 LHUMTHD Lower Humidity Threshold BSC6900 LICALMCTHD Alarm occur threshold BSC6900 LICALMRTHD Alarm recover threshold BSC6900 LINKNO Link No. BSC6900 LISTTYPE Query Type BSC6900 Key field used to identify one LAPD link of the parameters to be Type displayed when a cell template is queried. The value "DIFFERENCE" indicates that the parameters in the cell template that are different from LKTATE Link rate type BSC6900 ADD MTP3LNK(Opt ional) Rate type of the designated link SET ALMPORT(Op tional) Lower limit for triggering an alarm SET BTSENVALM PORT(Option Lower limit of an alarm. It is valid al) for the analog port. SET The loopback channel number E1T1LOP(Opti when the port loopback mode is set onal) to single channelof the loopback Upper threshold local low noise amplifier. When the working SET voltage of the low noise amplifier BTSRXUBP(O attenuator in the RXU board is ptional) smaller than this of the low alarm is Lower threshold value, an noise amplifier. When the working SET voltage of the low noise amplifier BTSRXUBP(O attenuator in the RXU board is ptional) greater than this value, an alarm is Optical interface tributary numbering method. This parameter SET indicates the sequence of OPT(Optional) tributaries in an SDH frame. ADD SEMILINK(Op tional) Rate of the semipermanent linklink. Initial bearing tag of the M3UA This parameter can be set to either ADD active mode or standby mode. For M3LNK(Optio details about the relevant bearer nal) tag, see the the parameter "Traffic Link load sharing. In the value, the number of 1s (represented by n) ADD determines the maximum number MTP3LKS(Opt (2^n) of links for the load sharing. ional) For example, B0000corresponding Signaling link mask indicates that to the M3UA link set. It is used for ADD the M3UA link load sharing. It is M3LKS(Option valid only when the working mode al) ofthe load of a cell is lower than the ADD If the signaling link set is set to GEXT2GCEL value of this parameter, the cell L(Optional) can admit the users handed over ADD from other cells with higher load. GEXT3GCEL Otherwise, the cell rejects such LL Lower Limit BSC6900 LL Lower Limit BSC6900 LLCN Channel No. BSC6900 LNA1 LNA Threshold1 BSC6900 LNA2 LNA Threshold2 BSC6900 LNKNUMMODE Tributary Numbering BSC6900 LNKRATE Semipermanent Link Rate BSC6900 LNKREDFLAG Initial bearing traffic active tag BSC6900 LNKSLSMASK Signalling link mask BSC6900 LNKSLSMASK Signalling link mask Load handover Load Accept Threshold BSC6900 LoadAccThres BSC6900 MSC Pool Load Balancing LOADBALANCEALG Algorithm Select BSC6900 LOADBROADCAST NC2 Load PERIOD Broadcast Period BSC6900 Type of load balancing algorithm of the MSC Pool. Generally, the ADD BSC6900 chooses an MSC GCNOPERAT according to the obtained network OR(Optional) resource that the BSC broadcasts a Intervals indication (NRI). In some SET cell's traffic load to its neighbor BSCPSSOFT cells. The uplink load and downlink PARA(Optiona load indicate the traffic situation of l) a cell. The uplink load = number of SET BTSPMUBP( Optional) SET GCELLHOBA SIC(Optional) ADD GEXT2GCEL L(Optional) ADD GEXT3GCEL L(Optional) SET GCELLHOFIT PEN(Optional) SET GCELLHOFIT PEN(Optional) SET GCELLHOAD( Optional) SET GCELLHOAD( Optional) SET GCELLHOAD( Optional) SET BTSDPMUBP( Optional) Load Current LOADCURRENTDIV Shunt Coefficient BSC6900 LoadHoEn Load Handover Support BSC6900 LoadHoEnExt2G Load Handover Support BSC6900 LoadHoEnExt3G Load Handover Support BSC6900 LOADHOPENTIME Penalty Time on Load HO BSC6900 LOADHOPENVALU Penalty Value on E Load HO BSC6900 LOADHOPERIOD Load HO Step Period BSC6900 LOADHOSTEP Load HO Step Level BSC6900 LOADOFFSET Load HO Bandwidth BSC6900 LOADPWROFFEN Load Power-off Allowed State BSC6900 Loadparameter specifies whether a This current shunt coefficient traffic load-sharing handover is enabled. The load handover helps to reduce cell congestion, improve success rate of a 2G neighboring Indicates that if channel cell supports load handovers, the BSC adds the load information of the local cells in the signaling procedures related toneighboring Indicates that if a 3G this cell supports load handovers, the BSC adds the load information of the local cells in the signaling procedures related to this After a load handover succeeds, the BSC punishes the former serving cell during "Penalty Time on Load HO" by subtracting "Penalty Value on Load HO" from After a load handover succeeds, the BSC punishes the former serving cell during "Penalty Time on Load HO" by subtracting "Penalty Value on a cell reaches or When the load of Load HO" from exceeds "Load HO Threshold", all the calls that are using this cell as the serving cell generate handover requests at theload handovers, In hierarchical same time, which starting from "Edge HO DL RX_LEV Threshold", a "Load HO Step Level" is added to the upper handover threshold after every In the handover algorithm of the first generation, load handovers can be performed only when the receive level of the current serving cell is in theenable "Edge HO DL Whether to range load power-off. In multi-mode scenario, the value of this parameter in one mode must be the same as the value of the corresponding parameter in LOADRESELALLO W Cell Load Reselection Allowed BSC6900 SET GCELLNC2P ARA(Optional) SET GCELLNC2P ARA(Optional) SET GCELLNC2P ARA(Optional) SET GCELLNC2P ARA(Optional) SET GCELLCHMG AD(Optional) LOADRESELMAXR Load Reselect XLEV Level Threshold BSC6900 LOADRESELRXTH RSH Load Reselection Receive Threshold BSC6900 LOADRESELSTART Load Reselection THRSH Start Threshold BSC6900 LOADSHAREALLO W Balance Traffic Allowed BSC6900 Whether to allow the cell load reselection. If this parameter is set to PERMIT and "NC2 Load Reselection Switch" is set to Support, the load of the target to Threshold for allowing the MS cell reselect a cell during load reelection. When the receive level of the serving cell is lower than this threshold, uplink load or downlink When the the load reselection is load of the target cell is lower than this threshold, it can accept the MSs from the serving cell due to load reselection. When the uplink load or downlink load of the cell exceeds this threshold, the load reselection decision is made. set to YES, the If this parameter is channel assignment algorithm II randomly selects the start range for channel traversal; otherwise, the algorithm selects the channel next LOADTHSW TRM Load Threshold switch BSC6900 SET BSCABISPRI MAP(Optional) TRM load threshold switch SET GBSCREDGR P(Mandatory) Local BSC identity ADD Local IP address of PPP link. The PPPLNK(Man IP address of the PPP link on the datory) BSC side. ADD MPGRP(Mand atory) Local IP address of the MP group ADD BTSPPPLNK( Mandatory) Local IP address of BTS PPP Link. ADD BTSMPGRP( Local IP address of BTS MLPPP Mandatory) Group. ADD NSVLLOCAL( Mandatory) Identifies a local NSVL LocalBSCID Local BSC ID BSC6900 LOCALIP Local IP address BSC6900 LOCALIP Local IP address BSC6900 LOCALIP Local IP Address BSC6900 LOCALIP Local IP Address BSC6900 LOCALNSVLI Local NSVL ID BSC6900 LOCALPORTNO Local Port No. BSC6900 LOCGRPNO Location Group No. BSC6900 LOCGRPNO Location Group No. BSC6900 LOCINFOKEY Filter of Location Information BSC6900 ADD SGSNROUTE INFO(Mandat ory) ADD BTSLOCGRP( Mandatory) ADD BTSRXU2LO ADD BTSOBJALM SHLD(Mandat ory) EXP ALMLOG(Opti onal) STA ALMLOG(Opti Identifies the local port of the router Number of the location group under the BTS. It is unique for each BTS. LOCIP1 First local IP address BSC6900 LOCIP2 Second local IP address BSC6900 Number ofof this parameter can The value a location group include one or two conditions. "&" is used to concatenate the conditions, and the records are obtained when the two IP address Identifies the first local conditions that communicates with the peer ADD end. When it is set to 0, it is invalid. SCTPLNK(Ma This IP address must be first ndatory) configured onsecond local IP Identifies the the corresponding address that communicates with ADD the peer end. When it is set to 0, it SCTPLNK(Opt is invalid. This IP address must be ional) first configured on the SET OPLOCK(Man Whether to lock all the non-default datory) local accounts ADD SCTPLNK(Ma ndatory) Local SCTP port number SET LODCTRL(Ma ndatory) board start load control. LOD BTSSW(Optio nal) LOD BTSPATCH(O Modeusage threshold for log flow CPU of software loading control. When the average CPU SET usage of sliding windows reaches FCCPUTHD( or exceeds the threshold, log flow Optional) control is triggered. threshold for Packet queue usage log flow control. When the average SET packet queue usage of sliding FCMSGQTHD windows reaches or exceeds the (Optional) threshold, log flow control is LOCKST Set Locked/Unlock BSC6900 LOCPN Local SCTP port No. BSC6900 LODCTRL Board Start Load Control. BSC6900 LODMODE Loading Mode BSC6900 LOGCTHD Log control threshold BSC6900 LOGCTHD Log control threshold BSC6900 LOGPORTFLAG Logic Port Flag BSC6900 LOGPORTNO Logic Port No. BSC6900 LOGPORTSN Logic Port Slot No. BSC6900 LOGRTHD Log restore threshold BSC6900 LOGRTHD Log restore threshold BSC6900 ADD Whether the SCTP is bound to a SCTPLNK(Ma logical port. For details, see "ADD ndatory) IPLOGICPORT". Logical port No. bound by the ADD SCTP. For details, see the SCTPLNK(Ma parameter "Logic port No." of the ndatory) "ADD IPLOGICPORT". Logical port slot No. bound by the ADD SCTP. For details, see the SCTPLNK(Ma parameter "Slot No." of the "ADD ndatory) IPLOGICPORT". CPU usage threshold for recovery from log flow control. When the SET average CPU usage of sliding FCCPUTHD( windows is lower than the Optional) threshold, log flow control is for Packet queue usage threshold recovery from log flow control. SET When the average packet queue FCMSGQTHD usage of smooth windows is lower (Optional) than the threshold, log flow control SET FCSW(Option al) Whether to control the log flow COL LOG(Mandato ry) STR BTSLOG(Man datory) ULD BTSLOG(Man LOGSW Log control switch BSC6900 LOGTYPE Log File Type BSC6900 LOGTYPE Log Type BSC6900 The log type to be collected. Type of the log. "COMLOG" indicates a common log. "CMPLOG" indicates a compressed log. LONGIDECI Longitude Decimal Part BSC6900 SET Decimal value when the longitude GCELLLCS(M where a cell is located is indicated andatory) in the format of degree SET Value of the degree part when the GCELLLCS(M latitude is indicated in the format of andatory) degree_minute_second SET Integer value when the longitude GCELLLCS(M where a cell is located is indicated andatory) in the format of degree SET Value of the minute part when the GCELLLCS(M longitude is indicated in the format andatory) of degree_minute_second LONGIDEGREE Longitude Degree Part BSC6900 LONGIINT Longitude Int Part BSC6900 LONGIMINUTE Longitude Minute Part BSC6900 LONGISECONDDE CI Longitude Second Decimal Part BSC6900 Longitude LONGISECONDINT Second Int Part BSC6900 Decimal value of the second part SET when the longitude is indicated in GCELLLCS(M the format of andatory) degree_minute_second Integer value of the second part SET when the longitude is indicated in GCELLLCS(M the format of andatory) degree_minute_second ADD GPS(Mandato ry) Latitude of the GP receiver antenna ADD GPS(Mandato Latitude of the GPS receiver ry) antenna STR BTSTST(Opti onal) Loop level type 1. Local loop:Make loop test on the STR local board at system side, while FRPORTLOO the system platform will send test P(Mandatory) frames. SET E1T1(Optional ) Loop Detect Switch LOP LAPDLNK(Ma ndatory) Loopback load of LAPD link on When the type an SDCCH the TRX that is in loose frequency SET reuse and is in the compatible GCELLCHMG band of the BCCH is lower than AD(Optional) this threshold, the SDCCH is STR CALLRESLOP (Mandatory) Direction of an externalare 14 loop Loopback point. There voice loopback points. Whether a STR loopback point is available depends CALLRESLOP on the subrack configuration mode (Mandatory) in the BSS and the transmission SET E1T1LOP(Ma ndatory) Loopback type LONGITUDE GPS antenna longitude BSC6900 LONGITUDESEC GPS antenna longitude BSC6900 LoopLevel Loop Level BSC6900 LOOPMODE Loopback Type BSC6900 LOOPSW Loop Detect Switch BSC6900 LOOPTYPE Loop type BSC6900 IBCA Loose Trx LOOSESDCCHLOA SDCCH Load DTHRED Threshold BSC6900 LOPDIR Loop Direction BSC6900 LOPLOC Loop Position BSC6900 LOPT Loop type BSC6900 LOPT Loop type. BSC6900 SET OPTLOP(Man datory) Loopback type STR CALLRESLOP (Optional) Time of an suspension periods Number of external voice loop after the bandwidth adjustment is ADD performed based on the packet IPLOGICPOR drop ratio. This parameter specifies T(Optional) the delay to permit the preemption Whether statistics periods in which of lower-level sublink resources. If SET the value of this parameter is YES, GCELLSOFT( a CS domain service can preempt Optional) the sublink resourcespreferred. The CS services are of the PS SET This parameter indicates that the BTSFLEXABI CS services are permitted to SPARA(Optio preempt the dynamic Abis nal) resources on the sublink of the SET GCELLOTHB ASIC(Optional Whether to permit the low noise ) amplifier (LNA) bypass SET GCELLCHMG AD(Optional) Whether to assign overlay channels in an IUO cell based on the receive level conditions Whether to power off the TRX in the case of overlow temperature of SET the BTS cabinet. BTSAPMUBP( If this parameter is set to "Yes", the Optional) BTS powers off the TRX and of a Whether to power off the TRX BTS when the temperature of the SET BTS cabinet is too low. BTSDPMUBP( In multi-mode scenario, the value Optional) of this parameter in one mode STR TRANSPERF TST(Mandator y) Loopback mode ADD IPPATH(Mand Number of the IP logical port that atory) carries the IP path ADD IPLOGICPOR T(Optional) Logical port number LOPTIME Loop Time Suspend times after bandwidth adjusted BSC6900 LOSTSUSTM BSC6900 Low-level Sublink LOWLEVSUBRESP Resource REEMPTFLG Preempt Switch BSC6900 LOWLEVSUBRESP Low Lev Sub Res REEMPTFLG Preempt Flag BSC6900 LOWNOISESWH Diversity LNA Bypass Permitted BSC6900 Allocate OL LOWRXLEVOLFOR Channel Based BIDSWITCH on RX Level BSC6900 LOWTEMPLOADP WROFF Low Temperature StartLoadPoweroff Allowed State BSC6900 Low Temperature StartLoadPoweroff Allowed State BSC6900 LOWTEMPLOADP WROFF LPBKMODE Loop Back Mode BSC6900 LPN IP Logic Port No. BSC6900 LPN Logic port No. BSC6900 LPN Logic port No. BSC6900 SET BTSIP(Mandat ory) Logical port number ADD IPPATH(Mand Number of the IP logical port that atory) carries the IP path ADD IPLOGICPOR T(Mandatory) SET GCELLEGPR SPARA(Optio nal) LPNSN IP Logic Port Slot No. BSC6900 LPNTYPE Type of the logic port BSC6900 LQCMODE Link Quality Control Mode BSC6900 LSDF Load Shutdown Flag BSC6900 LSDV Load Shutdown Voltage BSC6900 Type of logical to the radio It is applicable port transmission environment to improve the link quality. Link adaptation (LA) indicates adjusting the coding mode ofpower shutdown Whether to enable the channel upon low voltage of the battery. SET In multi-mode scenario, the value BTSAPMUBP( of this parameter in one mode Optional) must be the same as the value of Load power-off voltage threshold. If "Load Shutdown Flag" is set to SET "Enable" and the load voltage is BTSAPMUBP( lower than the value of this Optional) parameter, the load is automatically LSRTRD LDR Third BSC6900 SET LDR(Optional) Third action taken for load control LSTCMD Whether Include List Command BSC6900 EXP Whether to include the list LOG(Optional) command CMP TBLDATA(Opt Query results can be displayed ional) vertically or horizontally LstFormat Result list format BSC6900 LT Load type BSC6900 LOD BRD(Optional) Loading type SET LOGLIMIT(Ma ndatory) Type of the log EXP LOG(Mandato ry) Type of the log LT Log Type BSC6900 LT Log Type BSC6900 LTCP Low Temperature Critical Point BSC6900 Lower Temperature Threshold SET BTSDHEUBP( Optional) SET BTSEXD(Opti onal) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET BTSRXUBP(O ptional) SET BTSRXUBP(O ptional) SET BTSAPMUBP( Optional) LTEMTHD BSC6900 LTFERLOWTH Uplink Long-term FER Lower Threshold BSC6900 LTFERTGT Uplink Long-term FER Target BSC6900 Uplink Long-term FER Upper Threshold BSC6900 LTFERUPTH LTTHADJFA Uplink Threshold Adjust Factor BSC6900 Lvl1Vswr Lvl1 Vswr BSC6900 Lvl2Vswr Lvl2 Vswr BSC6900 LVSDF Low Voltage Shutdown Flag BSC6900 Temperature control threshold for low temperature. When the ambient temperature is less than "Low Temperature Critical Point", the temperature control system Lower temperature threshold for the environment alarm box to report an alarm indicating that the ambient temperature is too low. If the ambient temperature of the Lower voice quality threshold associated with the automatic adjustment of the AMR handover uplink threshold;The value of this parameter must be smaller than or Target voice quality value associated with the automatic adjustment of the uplink threshold of AMR handover Upper voice quality threshold associated with the automatic adjustment of the AMR handover uplink threshold threshold Factor of uplink adjustment. It indicates the linear relation between the threshold adjustment value and the logarithmic FER. Standing Wave The level 1 Voltage Ratio (VSWR) threshold. When the VSWR is higher than this parameter, the TRX will report a level-1 VSWR alarm. At this time, The level 2 Voltage Standing Wave Ratio (VSWR) threshold. When the VSWR is higher than this parameter, the TRX will report a level-2 VSWR alarm.Voltage" is Whether "Shutdown At this time, valid. In multi-mode base station scenario, the value of this parameter in different modes must M3UASRVPN M3UA service listening port No. BSC6900 SET SCTPSRVPO Number of the M3UA service RT(Optional) listening port ADD XPUVLAN(Ma ndatory) MAC address of the VLAN When the number of error frames SET on the MAC layer reaches the BTSETHPOR value of this parameter, the frame T(Optional) error alarm is generated. MAC MAC Address BSC6900 MACEAAT MAC Frame Error Alarm Threshold BSC6900 MACEADT MAC Frame Error Alarm Clearance Threshold BSC6900 MACODINGMOD ARFCN Coding Scheme BSC6900 MAIDX MA Index BSC6900 Power Derating MAINBCCHPWDTA Active Channel CTCHEN Enabled BSC6900 MAINBCCHPWRDT Power Derating EN Enabled BSC6900 MAINBCCHPWRDT Power Derating ETIME End Time BSC6900 MAINBCCHPWRDT Power Derating RANGE Range BSC6900 MAINBCCHPWRDT Power Derating STIME Start Time BTS Interface Board Bar Code 1 BSC6900 MAINDEVTAB BSC6900 MAINDEVTAB PTU Main Dev. Tab BSC6900 MAINLOCGRPNO Main Location Group No. BSC6900 When the number of error frames SET on the MAC layer decreases to the BTSETHPOR value of this parameter, the frame T(Optional) error alarm is cleared. an ARFCN Coding mode in which is sent to an MS during an SET assignment or handover. If the GCELLSOFT( parameter is set to CA_MA, an Optional) ARFCN isaindicated through the CA ADD Identifies maintenance group. ETHMA(Mand Maintenance group: maintenance atory) alliance (MA), which is a ADD component of the maintenance ETHMEP(Man domain (MD). Maintenance domain This parameter specifies whether to reduce the transmit power of the SET channels with the power derating GCELLOTHE function enabled of the non-BCCH XT(Optional) timeslots on thespecifies whether This parameter BCCH TRX. When to enable the Enhanced BCCH SET Power Consumption Optimization GCELLOTHE feature. Generally, the BCCH TRX XT(Optional) transmits signals at the maximum This parameter specifies the end SET time of the period during which the GCELLOTHE power of the non-BCCH timeslots XT(Optional) on the BCCH TRX is derated. This parameter specifies the range SET of power derating over the nonGCELLOTHE BCCH timeslots on the BCCH XT(Optional) TRX. This parameter specifies the start SET time of the period during which the GCELLOTHE power of the non-BCCH timeslots XT(Optional) on the BCCH TRX is derated. Bar code 1 of the interface board of the BTS. This parameter is the ADD electronic serial number of the BTSESN(Man active PTU board. An electronic datory) serial number uniquely identifies an ADD BTSAUTOPL AN(Mandatory Bar code 1 of the BTS interface ) board ADD BTSBINDLOC Number of main location group. GRP(Mandato Each cell contains only one main ry) location group. Number of the port to which the ADD active OML of the BTS is BTS(Optional) connected MAINPORTNO Main Port No BSC6900 MainVer Main Version No.of TMU BSC6900 MAIO1 MAIO 1 BSC6900 MAIO10 MAIO 10 BSC6900 MAIO11 MAIO 11 BSC6900 MAIO12 MAIO 12 BSC6900 MAIO2 MAIO 2 BSC6900 MAIO3 MAIO 3 BSC6900 MAIO4 MAIO 4 BSC6900 MAIO5 MAIO 5 BSC6900 MAIO6 MAIO 6 BSC6900 MAIO7 MAIO 7 BSC6900 MAIO8 MAIO 8 BSC6900 SET BTSAUTODL Main version No. of the TMU board DACTINFO(M software. It is configured according andatory) to the actual situation. Mobile allocation index offset 1. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 10. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 11. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 12. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 2. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 3. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 4. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 5. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 6. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 7. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Mobile allocation index offset 8. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts MAIO9 MAIO 9 BSC6900 MAJORALMUP0 Feed Tri. 0 TMA Over Critical Alarm Threshold BSC6900 Feed Tri. 1 TMA Over Critical Alarm Threshold BSC6900 Feed Tri. 2 TMA Over Critical Alarm Threshold BSC6900 Feed Tri. 3 TMA Over Critical Alarm Threshold BSC6900 Feed Tri. 4 TMA Over Critical Alarm Threshold BSC6900 Feed Tri. 5 TMA Over Critical Alarm Threshold BSC6900 MAJORALMUP1 MAJORALMUP2 MAJORALMUP3 MAJORALMUP4 MAJORALMUP5 MANAME MA Name BSC6900 MANAME MA Name BSC6900 Mobile allocation index offset 9. SET Start frequency number, which is GCELLMAIOP the number of the frequency where LAN(Optional) frequency hopping starts Critical alarm threshold against excessive TMA feed current of SET feed tributary 0. When the actual BTSDATUBP( current is greater than the specified Optional) value, aalarm threshold against Critical TMA feed current critical excessive TMA feed current of SET feed tributary 1. When the actual BTSDATUBP( current is greater than the specified Optional) value, the TMA feed current critical Critical alarm threshold against excessive TMA feed current of SET feed tributary 2. When the actual BTSDATUBP( current is greater than the specified Optional) value, the TMA feed current critical Critical alarm threshold against excessive TMA feed current of SET feed tributary 3. When the actual BTSDATUBP( current is greater than the specified Optional) value, the TMA feed current critical Critical alarm threshold against excessive TMA feed current of SET feed tributary 4. When the actual BTSDATUBP( current is greater than the specified Optional) value, the TMA feed current critical Critical alarm threshold against excessive TMA feed current of SET feed tributary 5. When the actual BTSDATUBP( current is greater than the specified Optional) value, the TMA feed current critical ADD ETHMA(Mand atory) PING BTSCFM(Man Name of the MA ADD BTSETHMA( Mandatory) ADD Name of the maintenance BTSETHLCM association. ADD PPPLNK(Man Subnet mask corresponding to the datory) local IP address of the PPP link ADD MPGRP(Mand Subnet mask of the MP group in atory) BSC. ADD ETHIP(Manda tory) ADD EMSIP(Manda Subnet mask of the board MASK Subnet mask BSC6900 MASK Subnet mask BSC6900 MASK Subnet mask BSC6900 MASK Packet source mask BSC6900 MASK Subnet mask BSC6900 ADD ICMPGUARD( Mandatory) ADD IPRTBIND(Ma ndatory) ADD ETHTRKIP(M Mask of the source IP network segment of the packet against the ICMP attack Subnet mask MASK Mask BSC6900 ADD GCBSADDR( Mandatory) Subnet mask of the CBC SET BTSETHPOR T(Optional) IP subnet mask of a BTS port ADD BTSPPPLNK( Mandatory) Subnet mask of BTS PPP link. ADD BTSMPGRP( Mandatory) ADD BTSAUTOPL AN(Mandatory ) SET BTSIPCLKPA RA(Mandatory ) MASK IP Mask BSC6900 MASK Subnet Mask BSC6900 MASK Subnet Mask Master Clock Server IP Address BSC6900 MASTERIPADDR BSC6900 MASTERIPADDR Clock Server IP Address 1 BSC6900 Subnet mask of BTS MLPPP Group. IP address of the main clock server. It must be a legal A/B/C type address but not a broadcast address or network address. It must be the valid address of the A, B, or C type and cannot be the broadcast address or network address. MAXADJPCVAL MAX Up Adj. PC Value by Qual. BSC6900 MAXASSOCRETR Association max retrans BSC6900 SET Step of upward power adjustment GCELLPWR2( according to the quality of the Optional) received signals the association If the number of retransmissions exceeds this ADD value, the parameter is deleted SCTPLNK(Opt automatically. The value must be ional) greater than Path max retrans. ADD IPLOGICPOR Maximum bandwidth for dynamic T(Optional) adjustment consecutive intra-cell Number of at the logical port handovers allowed in a cell. When SET the interval between two intra-cell GCELLHOAD( handovers is lower than a certain Optional) time threshold, these two intra-cell MAXBW Max bandwidth [64kbps] MAX Consecutive HO Times BSC6900 MAXCNTNUM BSC6900 Retry Times of MaxDlAssRetryTime Downlink TBF s Reassignment Retry Times of Downlink TBF Establishment BSC6900 MaxDlEstRetryNum BSC6900 SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) SET BTSBAKPWR (Optional) ADD BTSAUTOPL AN(Mandatory ) SET SET BTSAUTOPL ANCFG(Optio nal) Maximum number of attempts to resend the downlink assignment messages Number of attempts to re-establish the downlink TBF This parameter specifies the largest step of each TRX power reduction. number of TRXs that Maximum can be configured for one cell. For the BTS3900B GSM, when the "Frequency and BSIC Plan Switch" is ON, the number of TRXs that Maximum "Maximum TRX can be configured for one cell. For the BTS3900B GSM, when the "Frequency and BSIC Plan Switch" is ON, the "Maximum TRX MAXDROPPWRTH RESHOLD Max Drop Power Threshold BSC6900 MAXFQNUM Maximum TRX Number BSC6900 MAXFQNUM1 Maximum TRX Number BSC6900 MAXFRAMELEN Maximum Frame Length[byte] BSC6900 ADD IPMUX(Option Maximum multiplexing frame al) length. SET OTHSOFTPA RA(Optional) Maximum number of BTSs that are allowed to concurrently download software under a parameter cannot The value of this BSC be less than the maximum ADD PPPMUX sub-frame length PPPLNK(Opti (MUXMAXSFL). This parameter onal) can be associated with the ADD MPGRP(Optio Maximum length of the PPP nal) multiplexing frame SET PWDPOLICY( Maximum number of retries when Optional) the user logs in SET ALMCAPACIT Maximum capacity for storing the Y(Optional) alarm log SET BTSDPMUBP( Maximum output power of the Optional) diesel Max BTS Num of Parallel Software MAXLOADBTSNUM Load BSC6900 MAXMFLEN PPP mux max mux-frame length BSC6900 MAXMFLEN PPP mux max mux-frame length BSC6900 MaxMissTimes Maximum Retry Times BSC6900 MAXNUM Max Alarm Log Number BSC6900 MAXOUTPUTPOWE Diesel Max R Output Power BSC6900 MAXPATHRETR Path max retrans BSC6900 Pb Link Check Max TimeOut MaxPbLinkChkNum Number BSC6900 If the number of the path retransmissions exceeds this ADD value, the parameter is deleted SCTPLNK(Opt automatically. The value must be ional) smaller than Association Pb link Retransmission times of max check (LapdCheck) messages. SET When a BSC sends a Pb link OTHSOFTPA check message to an external PCU RA(Optional) and fails to receive a response SET GTRXBASE( Optional) MAXPDCHNUM Maximum Number of PDCH BSC6900 Maximum Rate Threshold of PDCHs in a Cell MAXPDCHRATE BSC6900 Retry Times of MaxPollingRetryTim Downlink TBF es Polling BSC6900 MAXRECHARGECU Charge RRENT Coefficient BSC6900 MAXRECHARGECU Charge RRENT Coefficient Max Resend Times of Phy.Info. Max Retransmissions for Radio Priority 1 Max Retransmissions for Radio Priority 2 Max Retransmissions for Radio Priority 3 Max Retransmissions for Radio Priority 4 BSC6900 MAXRESEND BSC6900 MAXRETRANS1 BSC6900 MAXRETRANS2 BSC6900 MAXRETRANS3 BSC6900 MAXRETRANS4 BSC6900 Maximum number of PDCHs that can be assignedof the PDCH ratio Maximum value in the TRX in a cell. The number of available SET TCHs and PDCHs in a cell is set to GCELLPSCH a fixed value. The PDCH ratio is: M(Optional) available PDCH/(TCH/F + static SET BSCPSSOFT PARA(Optiona Maximum number of attempts to l) resend thecurrent coefficient when Maximum polling messages the battery is charged. When the SET battery is charged, the maximum BTSPMUBP( current can be 0.01 to 0.99 times of Optional) the capacity of thecoefficient when Maximum current battery cabinet. the battery is charged. When the SET battery is charged, the maximum BTSDPMUBP( current can be 0.05 to 0.25 times of Optional) the capacity of the battery cabinet. Maximum times for a Physical Information message to be SET transmitted. When the GCELLHOAD( retransmission times exceeds this Optional) parameter retransmission for radio Maximum and the BTS still cannot priority 1. The 2bit Radio Priority SET message carried by the MS in the GCELLPRAC Packet Channel Request message H(Optional) has four levels of priorities. Level 1 Maximum retransmission for radio priority 2. The 2bit Radio Priority SET message carried by the MS in the GCELLPRAC Packet Channel Request message H(Optional) has four levels of priorities. Level 1 Maximum retransmission for radio priority 3. The 2bit Radio Priority SET message carried by the MS in the GCELLPRAC Packet Channel Request message H(Optional) has four levels of priorities. Level 1 Maximum retransmission for radio priority 4. The 2bit Radio Priority SET message carried by the MS in the GCELLPRAC Packet Channel Request message H(Optional) has four levels of priorities. Level 1 MAXSFLEN PPP mux max sub-frame length BSC6900 Maximum PPPMUX sub-frame length. If the PPP frame length is ADD larger than this value, the PPPMUX PPPLNK(Opti multiplexing is performed. The onal) value of this parameter cannot be ADD MPGRP(Optio Maximum length of the PPP nal) multiplexing frame Huawei power control algorithm II divides three quality zones SET according to the quality of the GCELLPWR2( receive signals. When the power is Optional) downwardly adjusted according to Huawei power control algorithm II divides three quality zones SET according to the quality of the GCELLPWR2( receive signals. When the power is Optional) downwardly adjusted according to Huawei power control algorithm II divides three quality zones SET according to the quality of the GCELLPWR2( receive signals. When the power is Optional) downwardly adjusted according to Maximum time advance (TA). The SET value of this parameter is GCELLBASIC determined by that of "Cell PARA(Optiona Extension Type" in the "ADD l) GCELL" command. SET Number of measurement reports GCELLCCAD( (MRs) used for averaging the time Optional) advance before the call drops Whether to initiate a forcible call SET drop when the time advance GCELLCCAD( exceeds "MAX TA Drop Call Optional) Threshold" Whether the time advance after SET filtering exceeds the threshold. If GCELLCCAD( the threshold is exceeded, a Optional) forcible call drop is initiated. STR POSAVE(Opti onal) Maximum positioning time. SET GTRXBASE( Optional) Maximum number of (16 kbit/s) Abis timeslots that the PDCHs can use in the TRX MAXSFLEN PPP mux max sub-frame length BSC6900 MAX Down Adj.Value Qual.Zone 0 MAX Down Adj.Value Qual.Zone 1 MAX Down Adj.Value Qual.Zone 2 MAXSTEP0 BSC6900 MAXSTEP1 BSC6900 MAXSTEP2 BSC6900 MAXTA Max TA BSC6900 MAXTADROPCALL MAX TA Drop FILTER Call Filter BSC6900 MAXTADROPCALL Max TA Drop Call SWITCH Switch BSC6900 MAXTADROPCALL MAX TA Drop THRESHOLD Call Threshold BSC6900 MAXTIME MAXTSOCP Maximum time for posave Maximum Number of Occupied Abis Timeslots BSC6900 BSC6900 MAXTTL MAX TTL BSC6900 TRC IPADDR(Optio Maximum TTL value of the sent nal) TRACERT packet MAXVALADJRX MAX Up Adj. PC Value by RX_LEV BSC6900 SET Step of upward power adjustment GCELLPWR2( according to the quality of the Optional) received signals ADD Detection index. The index is a IPRTBIND(Ma unique value ranging from 0 to 31 if ndatory) it is not specified. STR IPCHK(Manda tory) Local for address for the MS to BFD Used IP requesting multi-hop report the measurement SET information of neighboring cells in GCELLCCBA multiple frequency bands. This SIC(Optional) parameter is carried in the system For the purpose of accurately reflecting the radio environment of SET a network, filtering is performed on GCELLHOFIT the measured values in several PEN(Optional) consecutive measurement reports. For the purpose of accurately reflecting the radio environment of SET a network, filtering is performed on GCELLHOFIT the measured values in several PEN(Optional) consecutive measurement reports. COL SYNCINFO(M Number of the BTS. The BTS is andatory) numbered uniquely in a BSC. COL SYNCINFO(M andatory) ADD GCNOPERAT OR(Mandatory ) ADD SET BTSAUTOPL ANCFG(Optio nal) MBFDCHKN MBFD Check Index BSC6900 MBFDLOCALIP Multi hop BFD detect local ip BSC6900 MBR Multi-band report BSC6900 Filter Length for SDCCH MEAN_BEP MBSIGNLEN BSC6900 MBTRAFFLEN Filter Length for TCH MEAN_BEP BSC6900 MBTSID Second BTS Index BSC6900 MBTSNAME Second BTS Name BSC6900 MCC MCC BSC6900 MCC1 Cell MCC BSC6900 Name of the BTS. The BTS is named country code.BSC. Mobile uniquely in a This parameter identifies the country where a mobile subscriber is located, for example, the Chinese MCC is 460. country code (MCC). Local mobile It is used to identify the country that the mobile subscriber belongs to. For example, the MCC of China is 460. MCCLASS MC PRI number BSC6900 ADD Number of MC priorities. This MPGRP(Optio parameter is valid when the MP nal) group type is MC. ADD BTSMPGRP( Optional) Number of MC prioritie levels. MCCLASS MC PRI Number BSC6900 MCELLID Second Cell Index BSC6900 MCELLNAME Second Cell Name Cabinet No. of Management Board MCPA Optimization Switch GSM Multi Carrier BTS Standard BSC6900 MCN BSC6900 ADD NCELL(Mand atory) COL SYNCINFO(M ADD NCELL(Mand atory) COL SYNCINFO(M SET BTSFMUABP( Optional) SET BTSAPMUBP( Number of the cell. The cell is numbered uniquely in a BSC. Name ofNo. of the management Cabinet cell 2. board. The management board refers to the TMU or RXU that directly communicates with the board. The configuration of this MCPAOPTALG BSC6900 SET If the MCPA Optimization Switch is GCELLCHMG turned on, the MCPA priority AD(Optional) update mode is adjusted. SET BTSPSUFP(O Standard for the GSM multi-carrier ptional) BTS ADD ETHMD(Mand atory) ADD ETHMA(Mand Identifies a maintenance domain Level of the maintenance ADD domain.The priority of the BTSETHMD( maintenance domain ranks from 0 Optional) to 7 from low to high. ADD ETHMD(Mand atory) PING BTSCFM(Man name of the MD ADD BTSETHMD( Mandatory) ADD BTSETHMA( Name of the maintenance domain. SET Whether to allow the MS to the GCELLPSI1(O send the PS measurement report ptional) to the network side ADD GNRNC(Mand atory) Common measurement period SET GCELLCCUT RANSYS(Opti Type of the measurement report onal) (MR) reported by the MS MCSTANDARD BSC6900 MDIDX MD INDEX BSC6900 MDLEVEL MD Level BSC6900 MDName MD NAME BSC6900 MDNAME MD Name BSC6900 MEASORDER Allow MR Command or not BSC6900 MEASPERIOD Measurement Period BSC6900 MEASURETYPE Measurement Report Type BSC6900 MEPID MEP ID BSC6900 MEPID MEP ID BSC6900 ADD ETHMEP(Man datory) ADD BTSETHLCM EP(Mandatory ) ADD Identifies a maintenance point in the maintenance alliance A maintenance point is an edge node of the MA. MEPTYPE MEP Type BSC6900 Identifies a maintenance end point (MEP) of a maintenance association.the maintenance point The type of added to the maintenance group. ADD LocalMep indicates a local ETHMEP(Man maintenance point and datory) RemoteMep indicates a remote ADD MPGRP(Optio nal) MP/MC sequence header option ADD BTSMPGRP( Frame encapsulation format Optional) supportedreceive level for a Minimum by MP/MC. neighbor cell to become a SET candidate cell during cell GCELLNC2P reselection. When the receive level ARA(Optional) of the serving cell is lower than the ADD IPLOGICPOR Minimum bandwidth for dynamic T(Optional) adjustment candidate cells. If the Selects 3G at the logical port measured value of a 3G ADD neighboring cell is lower than this GEXT3GCEL threshold, the 3G neighboring cell L(Optional) will be removed from among the Minimum receive level offset. An MS can be handed over to a ADD neighboring cell only when the G2GNCELL(O downlink level of the neighboring ptional) cell is greater triggering prompt Threshold for than the sum of "Min alarm clearance when the ANT_A SET tributary antenna current is too BTSRXUBP(O heavy. When the actual current is ptional) higher than the configured value, Threshold for triggering prompt alarm clearance when the ANT_B SET tributary antenna current is too BTSRXUBP(O heavy. When the actual current is ptional) higher than the threshold against Warning alarm configured value, excessive TMA feed current of SET feed tributary 0. When the actual BTSDATUBP( current is greater than the specified Optional) value, a TMA feed current warning MHF MP/MC list head option BSC6900 MHF MP/MC List Head Option BSC6900 MINACCRXLEV Cell Reselection Level Threshold BSC6900 MINBW Min bandwidth [64kbps] BSC6900 MINECNOTHRES Min Ec/No threshold BSC6900 MINOFFSET MinorAlmThdA MinorAlmThdB Min Access Level Offset BSC6900 ANT_A ALD Current Minor Alarm Occur Threshold BSC6900 ANT_B ALD Current Minor Alarm Occur Threshold BSC6900 Feed Tri. 0 TMA Over Warning Alarm Threshold BSC6900 MINORALMUP0 MINORALMUP1 Feed Tri. 1 TMA Over Warning Alarm Threshold BSC6900 Feed Tri. 2 TMA Over Warning Alarm Threshold BSC6900 Feed Tri. 3 TMA Over Warning Alarm Threshold BSC6900 Feed Tri. 4 TMA Over Warning Alarm Threshold BSC6900 Feed Tri. 5 TMA Over Warning Alarm Threshold BSC6900 ANT_A ALD Current Minor Alarm Clear Threshold BSC6900 ANT_B ALD Current Minor Alarm Clear Threshold BSC6900 SET BTSDATUBP( Optional) SET BTSDATUBP( Optional) SET BTSDATUBP( Optional) SET BTSDATUBP( Optional) SET BTSDATUBP( Optional) SET BTSRXUBP(O ptional) SET BTSRXUBP(O ptional) MINORALMUP2 MINORALMUP3 MINORALMUP4 MINORALMUP5 MinorClrThdA MinorClrThdB Min Power Level MINPWRLEVDIRTR For Directed Y Retry BSC6900 MINRESTIMETCH TCH Minimum Recovery Time BSC6900 MINRSCPTHRES Min RSCP threshold Min interval of BFD packet receive [ms] BSC6900 SET GCELLHOCT RL(Optional) SET GCELLCHMG Minimum time required for a TCH BASIC(Option to transform to a SDCCH and then al) transform back to a TCH If the Selects 3G candidate cells. measured value of a 3G ADD neighboring cell is lower than this GEXT3GCEL threshold, the 3G neighboring cell L(Optional) will be removed from among the Warning alarm threshold against excessive TMA feed current of feed tributary 1. When the actual current is greater than the specified value, the TMA threshold against Warning alarm feed current excessive TMA feed current of feed tributary 2. When the actual current is greater than the specified value, the TMA threshold against Warning alarm feed current excessive TMA feed current of feed tributary 3. When the actual current is greater than the specified value, the TMA threshold against Warning alarm feed current excessive TMA feed current of feed tributary 4. When the actual current is greater than the specified value, the TMA threshold against Warning alarm feed current excessive TMA feed current of feed tributary 5. When the actual current is greater than the specified value, the TMA feed current Threshold for triggering prompt alarm clearance when the ANT_A tributary antenna current is too heavy. When the actual current is lower than for triggering prompt Threshold the configured value, alarm clearance when the ANT_B tributary antenna current is too heavy. When the actual current is lower than retry, when the value, In a direct the configured receive level of a neighboring cell is no smaller than this parameter, the neighboring cell can be a candidate cell for the direct retry. MINRXINT BSC6900 STR IPCHK(Option Minimum interval at which two BFD al) packets are received. ADD BTSBFD(Opti Minimum interval at which the BTS onal) receives BFD packets MINRXINTERVAL Minimum RX Interval BSC6900 MINTXINT Min interval of BFD packet send [ms] BSC6900 STR IPCHK(Option Minimum interval between sent al) BFD packets ADD BTSBFD(Opti onal) STR ETHMIRROR PORT(Mandat ory) STR ETHMIRROR PORT(Mandat ory) STR ETHMIRROR PORT(Mandat ory) ADD GCNOPERAT OR(Mandatory ) ADD SET BTSAUTOPL ANCFG(Optio nal) MINTXINTERVAL Minimum TX Interval BSC6900 Minimum interval at which the BTS sends BFD packets MIRRORDPN Mirror Dest Port No. BSC6900 Mirror destination Ethernet port number MIRRORSPN Mirror Source Port No. BSC6900 Mirror Ethernet port number MIRRORTYPE Mirror Type BSC6900 MNC MNC BSC6900 Mirror type Mobile network code. This parameter identifies the public land mobile network (PLMN) where a mobile subscriber is homed. MNC1 Cell MNC BSC6900 MOCACCESSCPUR MOC Access ATE CPU Rate BSC6900 MODE System clock working mode BSC6900 MODE Signalling link mode BSC6900 Mobile network code (MNC). It is used to identify the PLMN that the mobile threshold of the CPU for Usage subscriber belongs to. calling access. If the usage of the SET CPU exceeds the threshold, the BSCFCPARA( calling access request is Optional) transferred to other CPU for clock. Working mode of the system Working modes of the system SET clock are as follows: CLKMODE(M (1) MANUAL: In this mode, you andatory) must specify a clock source and SCTP link work mode. Server mode: BSC6900 starts the listening ADD and waits for the peer to send the SCTPLNK(Ma SCTP-INIT message. Client mode: ndatory) BSC6900 actively sends the SCTPSET QUICKCFG(M andatory) configuration mode SWP MBSCMODE( Mandatory) CHK MODEDATA( Working mode after switchover MODE Configure Mode BSC6900 MODE Mode after Switchover BSC6900 MODE Backup mode BSC6900 MODE Check mode BSC6900 MODE0 Feed Tri. 0 Alarm Mode BSC6900 MODE1 Feed Tri. 1 Alarm Mode BSC6900 MODE2 Feed Tri. 2 Alarm Mode BSC6900 MODE3 Feed Tri. 3 Alarm Mode BSC6900 MODE4 Feed Tri. 4 Alarm Mode BSC6900 MODE5 Feed Tri. 5 Alarm Mode BSC6900 MONITORPERIOD Monitor Period BSC6900 MONITORTIME Monitor Time BSC6900 Month Month BSC6900 MOVESPEEDTHRE Quick Move S Speed Threshold BSC6900 SET Backup mode of the switch MSP(Optional) protection group a port. When this Working mode of parameter is set to STR CHECK_ON_STANDBY_PORT, IPCHK(Option the connectivity check is performed al) on the mode of port. tributary 0. Alarm standby feed When this There are three alarm modes. SET Alarm mode 1 has only one type of BTSDATUBP( alarms. The alarm current is fixed Optional) and greater than the tributary 1. Alarm mode of feed normal There are three alarm modes. SET Alarm mode 1 has only one type of BTSDATUBP( alarms. The alarm current is fixed Optional) and greater than the tributary 2. Alarm mode of feed normal There are three alarm modes. SET Alarm mode 1 has only one type of BTSDATUBP( alarms. The alarm current is fixed Optional) and greater than the tributary 3. Alarm mode of feed normal There are three alarm modes. SET Alarm mode 1 has only one type of BTSDATUBP( alarms. The alarm current is fixed Optional) and greater than the tributary 4. Alarm mode of feed normal There are three alarm modes. SET Alarm mode 1 has only one type of BTSDATUBP( alarms. The alarm current is fixed Optional) and greater than the tributary 5. Alarm mode of feed normal There are three alarm modes. SET Alarm mode 1 has only one type of BTSDATUBP( alarms. The alarm current is fixed Optional) and greater than the normal STR BTSRACKTE MPMON(Man datory) Monitoring period STR BTSRACKTE MPMON(Man datory) Monitoring duration SET BTSAUTODL DACTINFO(M Month when the TMU board andatory) software is released A quick handover can be initiated SET only if the rate of an MS is higher GCELLHOFA than this parameter during a ST(Optional) certain period of time. MPGRPEAAT MPGRPEADT MP Group Frame Error Alarm Threshold BSC6900 MP Group Frame Error Alarm Clearance Threshold BSC6900 MPGRPN MP Group No. BSC6900 When the number of error frames ADD on the MP group reaches the value BTSMPGRP( of this parameter, the frame error Optional) alarm is generated. When the number of error frames ADD on the MP group decreases to the BTSMPGRP( value of this parameter, the frame Optional) error alarm is cleared. ADD MPGRP(Mand atory) ADD MPLNK(Mand MP group number ADD IPLOGICPOR T(Optional) MP group number ADD BTSMPGRP( Mandatory) ADD Number of an MLPPP group on a BTSMPLNK(M BTS. It ismultiplexing BTS. at the Timeslot unique in a mode Abis interface of the BTS. The BTS supports two multiplexing modes: ADD statistical multiplexing on a 64 BTS(Optional) kbit/s timeslot and physical SET Number of the serial port where the BTSFMUABP( board is located. The management Optional) board refers to the TMU or RXU SET that directly communicates with the BTSAPMUBP( board. The configuration of this ADD BTSMPGRP( Optional) Is Support MCPPP. ADD MPGRP(Optio nal) SET MPUBIND(Ma ndatory) ADD BRD(Mandato SET MPUBIND(Ma ndatory) ADD BRD(Mandato MPGRPN MP Group No. BSC6900 MPGRPN MLPPP Group No. BSC6900 MPMODE Multiplexing Mode BSC6900 MPN Connect Port No. BSC6900 MPSWITCH MCPPP Switch BSC6900 MPTYPE MP type BSC6900 MP type MPUSLOT MPU Slot No. BSC6900 Number of the slot where the MPU subsystem is located MPUSUBRACK MPU Subrack No. MR. Compensation Allowed BSC6900 MRCOMPREG BSC6900 Number of the subrack where the MPU subsystemcontrol algorithm II Whether power is located allows measurement report SET compensation. GCELLPWR2( When making a power control Optional) decision, the BSC retrieves a MRMISSCOUNT Allowed MR Number Lost BSC6900 MRMISSNUM MRMissNumber BSC6900 If the number of measurement reports lost consecutively is no SET larger than this value, linear GCELLHOFIT interpolation is performed for the PEN(Optional) values in the lost measurement When the number of the lost SET measurement reports exceeds this GCELLPWR3( parameter during a power control Optional) period, the power control stops. SET Frequency at which the BTSs GCELLHOCT submit pre-processed RL(Optional) measurement reports to the BSC SET BTSRXUBP(O Attenuation factor for the TMA of ptional) antenna tributary 1 SET BTSRXUBP(O Attenuation factor for the TMA of ptional) antenna tributary 2 Switch of measurement report collection within a specified scope. SET If the specified scope is a site, the GMRSCOPE( switch applies to all the cells at the Mandatory) site; control switch of measurement The if the specified scope is a cell, report collection includes OFF (do SET not collect), ON_WITH_SDCCH GMRCTRL(M (collect measurement reports for andatory) SDCCHs and TCHs), and ADD BTSPPPLNK( Maximum length of a received Optional) packet. The value of this parameter ADD is negotiated at both ends of a BTSMPLNK(O communication. ADD AISSCFG(Opti Number of MSs used when the onal) offset information is collected Whether to collect the information about the MSs of different SET capabilities in a cell. This GCELLSOFT( parameter has no impact on Optional) services. capacity of the MSC. This Available parameter is valid only when the ADD MSC pool function is enabled. It is GCNNODE(O set according to the actual capacity ptional) of the MSC. ADD GCNOPERAT OR(Mandatory Number of bits occupied by the ) NRI in the TMSI Sent Freq.of MRPREPROCFREQ preprocessed MR BSC6900 MRRUATTENFACT Antenna Tributary OR1 1 Factor BSC6900 MRRUATTENFACT Antenna Tributary OR2 2 Factor BSC6900 MR Collection MRSCOPESWITCH Scope Switch BSC6900 MRSWITCH MR Collection Control Switch BSC6900 MRU Max Receive Unit BSC6900 MS Number of MSs BSC6900 MSCAPABLESTATS MS Capability WITCH Statistic Switch MSC Available Capability<K User number> BSC6900 MSCCAP BSC6900 MSCNRILEN Length of NRI in TMSI BSC6900 MSCNULLNRI MSC NULL-NRI Value BSC6900 ADD GCNOPERAT OR(Optional) ADD GCNOPERAT OR(Optional) ADD GCNNODE(O ptional) SET GCELLCCUT RANSYS(Opti onal) MSCPOOLALLOW MSC Pool Function Enabled BSC6900 MSC Administrable State MSCSTATUE BSC6900 MSCVER MSC Version Indication BSC6900 Special NRI that is coded together with common NRIs. This parameter is used to indicate that the BSC routes the service initiated by the MS to theto enablenon OFFLOAD Whether MSC in the MSC pool function on the BSC6900. The MSC pool function enables up to 32 MSCs to provide services for mobile subscribers in athe MSC. Administrative state of BSC6900. This parameter is valid only when the MSC pool function is enabled. It is set according to the actual operating state of the MSC. A call Protocol version of the MSC that is connected to the BSC6900. The supported signaling varies with the protocol versions. MSIPFAILINDDELA Y TREESTABLISH BSC6900 MSISDN MSISDN BSC6900 MSISDNPREFIX1 MSISDN prefix 1 BSC6900 MSISDNPREFIX2 MSISDN prefix 2 BSC6900 MSISDNPREFIX3 MSISDN prefix 3 BSC6900 MSISDNPREFIX4 MSISDN prefix 4 BSC6900 MSISDNPREFIX5 MSISDN prefix 5 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs1 BSC 1 BSC6900 SET GCELLTMR( Optional) Call reestablishment timer CHK INNSPCH(Ma ndatory) STR CALLRESLOP MSISDN value 1. When matching prefix the call specified by the mobile SET number, the BSC6900 adds the BSCBASIC(O MSISDN prefix 1 according to the ptional) value of this parameter. For MSISDN prefix 2. When matching the call specified by the mobile SET number, the BSC6900 adds the BSCBASIC(O MSISDN prefix 2 according to the ptional) value of this parameter. For MSISDN prefix 3. When matching the call specified by the mobile SET number, the BSC6900 adds the BSCBASIC(O MSISDN prefix 3 according to the ptional) value of this parameter. For MSISDN prefix 4. When matching the call specified by the mobile SET number, the BSC6900 adds the BSCBASIC(O MSISDN prefix 4 according to the ptional) value of this parameter. For MSISDN prefix 5. When matching the call specified by the mobile SET number, the BSC6900 adds the BSCBASIC(O MSISDN prefix 5 according to the ptional) value of this parameter. For If "Options for BSC Local Switch" is set to PREFIXNUMBER, and the SET first digits in the MSISDN of the BSSLS(Option called or calling are the same as al) the value of this parameter, the MsisdnPrfxList2Start Prefix Number for BscLs10 BSC 10 BSC6900 SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) MsisdnPrfxList2Start Prefix Number for BscLs2 BSC 2 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs3 BSC 3 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs4 BSC 4 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs5 BSC 5 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs6 BSC 6 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs7 BSC 7 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs8 BSC 8 BSC6900 MsisdnPrfxList2Start Prefix Number for BscLs9 BSC 9 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs1 BTS 1 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs10 BTS 10 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs2 BTS 2 BSC6900 If "Options for BSC Local Switch" is set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the MsisdnPrfxList2Start Prefix Number for BtsLs3 BTS 3 BSC6900 SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) MsisdnPrfxList2Start Prefix Number for BtsLs4 BTS 4 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs5 BTS 5 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs6 BTS 6 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs7 BTS 7 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs8 BTS 8 BSC6900 MsisdnPrfxList2Start Prefix Number for BtsLs9 BTS 9 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs1 BSC 1 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs10 BSC 10 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs2 BSC 2 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs3 BSC 3 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs4 BSC 4 BSC6900 If "Options for BSC Local Switch" is set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the is If "Options for BSC Local Switch" set to PREFIXNUMBER, and the first digits in the MSISDN of the called or calling are the same as the value of thisin the MSISDN of If the first digits parameter, the the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. MsisdnSegList2Avoi Avoid Number for dBscLs5 BSC 5 BSC6900 SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) SET BSSLS(Option al) MsisdnSegList2Avoi Avoid Number for dBscLs6 BSC 6 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs7 BSC 7 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs8 BSC 8 BSC6900 MsisdnSegList2Avoi Avoid Number for dBscLs9 BSC 9 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs1 BTS 1 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs10 BTS 10 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs2 BTS 2 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs3 BTS 3 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs4 BTS 4 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs5 BTS 5 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs6 BTS 6 BSC6900 If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BSC local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BTS local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BTS local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BTS local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BTS local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BTS local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BTS local switching function is disabled. digits in the MSISDN of If the first the called or calling are the same as the value of this parameter, the BTS local switching function is disabled. MsisdnSegList2Avoi Avoid Number for dBtsLs7 BTS 7 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs8 BTS 8 BSC6900 MsisdnSegList2Avoi Avoid Number for dBtsLs9 BTS 9 BSC6900 EN Quick PBGT HO ALG When MSLEVSTRQPBGT MS Leaves BTS If the first digits in the MSISDN of the called or calling are the same SET as the value of this parameter, the BSSLS(Option BTS local switching function is al) disabled. digits in the MSISDN of If the first the called or calling are the same SET as the value of this parameter, the BSSLS(Option BTS local switching function is al) disabled. digits in the MSISDN of If the first the called or calling are the same SET as the value of this parameter, the BSSLS(Option BTS local switching function is al) disabled. SET Whether to enable "Triggering the GCELLHOFA quick PBGT algorithm only when ST(Optional) an MS is far from the Channel Maximum number of BTS" Request messages that can be SET sent by an MS in an immediate GCELLCCBA assignment procedure. SIC(Optional) After the MS initiates the SET MSPCMD(Ma Control command of the MSP ndatory) switchover protection group SET GCELLPSCH Threshold of the MS Receiver M(Optional) Diversity (MSRD) mode PDCH Downlink multiplex threshold in the Mobile Station SET Receiver Diversity (MSRD) mode. GCELLPSCH When this parameter is set to "80", M(Optional) the MS does not adopt the MSRD SET Number of the subrack where the BTSFMUABP( board is located. The management Optional) board refers to the TMU or RXU SET that directly communicates with the BTSAPMUBP( board. The configuration of this The M criteria supports setting minimum values for the downlink ADD receive level of neighboring cells. GEXT2GCEL The M criteria is met only when , L(Optional) Estimated number of received When the downlink level of measurement reports on the SET downlink transmission quality GCELLNC2P (Packet Downlink Ack/Nack ARA(Optional) message) is greater than or equal Duration of the flow control timer F SET of the MS. The MS sends the flow BSSGPPARA( control message according to this Optional) duration. BSC6900 MSMAXRETRAN MS MAX Retrans BSC6900 MSPCMD MSP Control Command BSC6900 MSRDMCSLEV MSRD MCS Threshold MSRD PDCH Multiplex Threshold Subrack No. of Management Board BSC6900 MSRDPDCHLEV BSC6900 MSRN BSC6900 MSRXMIN Min DL level on candidate Cell BSC6900 MS Rx Quality MSRXQUALSTATT Statistic HRSH Threshold BSC6900 MSTF MS Flow Control Timer BSC6900 MSTSERVACTDEL AY Master Service Active Delay BSC6900 MSTXPWRMAX Maximum TX Power for Access PCH BSC6900 Self-healing Switch for Memory Overload BSC6900 SET GBSCREDGR P(Optional) SET GCELLSERV PARA(Optiona l) SET SLFSLVSW(O ptional) If no handshake message is received from the peer within the delay, the master service is activated. Maximum TX power for the MS to access the PCH MSW MTCACCESSCPUR MTC Access ATE CPU Rate BSC6900 Switch for the self-healing of the OMU when the OMU process memory is overloaded CPU for Usage threshold of the called access. If the usage of the SET CPU exceeds the threshold, the BSCFCPARA( called access request is transferred Optional) to other CPU for processing. CHK E1T1CRS(Ma ndatory) Detection method ADD MTP3LNK(Ma ndatory) Identify an MTP2 link Metric system. The values of this ADD parameter include "MET" and GPS(Optional) "IMP". ADD SCTPLNK(Opt ional) Maximum transport unit SET ETHPORT(Op tional) Maximum transmission unit SET Maximum size of a packet that can BTSETHPOR be transmitted or received on a FE T(Optional) port. SET BTSBAT(Opti onal) SET GCELLSERV PARA(Optiona l) MTHD Method BSC6900 MTP2LNKN MTP2 link No. BSC6900 MTRLGY Metrology BSC6900 MTU MTU value BSC6900 MTU MTU[Byte] BSC6900 MTU MTU Hierarchical Power Supply Para.<0.1v> BSC6900 MTVT BSC6900 MULTIBANDREP Multi-Band Report BSC6900 Bus voltage of the battery rack of the BTS point report value, Multi-band including "report six cells with the strongest signal at each frequency point", "report one cell with the strongest signal at each frequency MUTECHECKCLAS Period of Mute S1PERIOD Detect Class1 BSC6900 Period of performing class-1 mute detection. If the bad frame rate SET reaches "Bad Frame Threshold of GCELLSOFT( Mute Detection Class 1" within the Optional) period specified by this parameter, SET GCELLSOFT( Whether to enable the class-2 Optional) mute detection Period of performing the class-2 mute detection. After the BTS or SET TC initiates a class-2 mute GCELLSOFT( detection request, the class-2 mute Optional) detection fails if there is no Time for prohibiting the call from SET accessing the corresponding GCELLSOFT( channel where one-way audio is Optional) detected on the Abis interface. Whether to forcibly release a call SET after the forced handover fails in GCELLSOFT( the case of one-way audio on the Optional) Abis interface ADD PPPLNK(Opti Maximum time waiting for onal) multiplexing ADD MPGRP(Optio Frame timeout duration of the PPP nal) multiplexing group ADD IPMUX(Manda tory) IP packet multiplexing type SET BTSCABPAR Minimum number of reserved A(Optional) working status TRXs of the cabinet STR IPCHK(Option al) BFD local description the LAPD System parameter in mark protocol. The value of this SET parameter specifies the maximum BTSRINGATT number of times when a frame is R(Optional) retransmitted. performed on the I Error control is frame sent over the LAPDm layer SET between the BTS and MS. If the GCELLCCTM MS detects errors in an I frame, the R(Optional) BTS should resend the I frame. MUTECHECKCLAS Mute Detect S2SWITCH Class2 Switch BSC6900 MUTECHECKPEIR OD Period of Mute Detect Class2 BSC6900 Access MUTEFORBITCALL Prohibited Upon TMINTVAL One-Way Audio BSC6900 Forced Call Release Upon Failed Handover in One-Way MUTERELCALLEN Audio BSC6900 MUXTIME PPP mux framing out-time[us] BSC6900 MUXTIME PPP mux framing out-time[us] BSC6900 MUXTYPE IP MUX Type BSC6900 MWTRXNO Min Quantity of Working TRXs BSC6900 MYDISCRIMINATO R My discriminator of BFD BSC6900 N200 N200 BSC6900 N200ESTAB N200 of Establish BSC6900 N200FFULL N200 of FACCH/Full Rate BSC6900 SET GCELLCCTM R(Optional) SET GCELLCCTM R(Optional) SET GCELLCCTM R(Optional) SET GCELLCCTM R(Optional) SET GCELLCCTM R(Optional) SET GCELLCCTM R(Optional) SET GCELLSTAN DARDOPTPA RA(Optional) SET GCELLSTAN DARDOPTPA RA(Optional) SET GCELLSTAN DARDOPTPA RA(Optional) N200FHALF N200 of FACCH/Half Rate BSC6900 Use LAPDm N200PARASWITCH N200 BSC6900 N200REL N200 of Release BSC6900 N200SACCH N200 of SACCH BSC6900 N200SDCCH N200 of SDCCH BSC6900 N3101 Maximum Value of N3101 BSC6900 N3103 Maximum Value of N3103 BSC6900 N3105 Maximum Value of N3105 BSC6900 N391 Parameter of DTE [N391] BSC6900 ADD BC(Optional) N392 Parameter of DTE [N392] BSC6900 ADD BC(Optional) N393 Parameter of DTE [N393] BSC6900 ADD BC(Optional) Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. I Error control is performed on the frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the sends the Whether the BSC6900 I frame. LAPDm N200 parameter to the BTS. If this parameter is set to YES, the BSC sends the performed on the I Error control is LAPDm N200 frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. I Error control is performed on the frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. I Error control is performed on the frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resendthe N3101 Maximum value of the I frame. counter. In the dynamic uplink allocation mode, the network side enables multiple MSs to share the same uplink channel through the Maximum value of the N3101 counter. When the uplink transmission ends, if the network side receives the last RLC data block, the network sideN3105 an Maximum value of the sends counter. After the downlink TBF is set up successfully, the N3105 is started on the network side. After the downlink RLC data block is link Counter on the DTE side. After integrity is verified according to "Parameter of DTE [N391]", the global state query request is originated on the DTE side. Counter on the DTE side, recording the checking times "Parameter of DTE [N393]". After link integrity is verified according to "Parameter of DTE [N392]", the state is restored. Counter on the DTE side, recording the checking times "Parameter of DTE [N393]". After link integrity is verified according to "Parameter of DTE [N392]", the state is restored. NACCSPT Support NACC BSC6900 Whether to support the network assisted cell change (NACC). The SET NACC is used in the network GCELLGPRS( control modes NC0, NC1 or NC2. Optional) The NACC enables the network to ADD OPC(Mandato ry) Name of the OSP ADD N7DPC(Mand atory) Name of the DSP ADD MTP3RT(Man datory) Name of an MTP3 route ADD MTP3LKS(Ma ndatory) Name of the signalling link set ADD MTP3LNK(Ma ndatory) Name of the MTP3 link ADD ADJNODE(Ma ndatory) Name of the adjacent node ADD M3LE(Mandat Local entity name. The local entity ory) name must be unique. ADD M3DE(Mandat ory) Name of the destination entity ADD The M3UA route names and the M3RT(Mandat M3UA routes are in the one-to-one ory) matching relation. ADD Name of the M3UA link set. The M3LKS(Mand name of the M3UA signalling link atory) set must be unique. M3UA signaling link name. The ADD M3UA link names and the M3UA M3LNK(Mand links are in the one-to-one atory) matching relation. NAME OSP name BSC6900 NAME DSP name BSC6900 NAME Signalling Route name BSC6900 NAME Signalling link set name BSC6900 NAME Signalling link name BSC6900 NAME Adjacent Node Name BSC6900 NAME Local entity name BSC6900 NAME Destination entity name BSC6900 NAME M3UA route name BSC6900 NAME M3UA Signalling link set name BSC6900 NAME M3UA Signaling link name BSC6900 NAME PCU Name BSC6900 ADD PCU(Mandato ry) Name of the PCU SET GCELLCHMG AD(Optional) SET GCELLPSPW PARA(Optiona l) SET GCELLBASIC PARA(Optiona l) ADD GIBCAPNCG RP(Mandatory ) ADD GIBCAPNCG RP(Mandatory ) ADD GIBCAPNCG RP(Mandatory ) ADD GIBCAPNCG RP(Mandatory ) Whether to preferentially allocate loose multiplexing frequencies to non-AMR users of the collision Filter consistent signal strength of power control. When sampling must be performed (NAVGI) times before the MS obtains the efficientthe Tandem Whether to enable measurement Free Operation (TFO) function on the BTS through a CHANNEL ACTIVATION or MODE MODIFY message Uniform number of neighboring cell 1 index within a BSC6900, which uniquely identifies a cell and is in the range 0 to 5047. Assign Non-AMR NAMRLFRMTRXAL User Loose Fre. LOWED Reuse TRX BSC6900 NAVGI N_AVG_I BSC6900 NBAMRTFOSWITC H TFO Switch BSC6900 NBR2GNCELL1ID Neighbor 2G Cell 1 Index BSC6900 NBR2GNCELL1NAM Neighbor 2G Cell E 1 Name BSC6900 NBR2GNCELL2ID Neighbor 2G Cell 2 Index BSC6900 Name of neighboring GSM cell 2. Index of neighboring GSM cell 1 Uniform number of a cell index within a BSC6900, which uniquely identifies a cell and is in the range 0 to 5047. NBR2GNCELL2NAM Neighbor 2G Cell E 2 Name BSC6900 Name of neighboring GSM cell 2 NBR2GNCELLID Neighbor 2G Cell Index BSC6900 ADD Uniform number of a cell index G2GNCELL(M within a BSC6900 andatory) , which uniquely identifies a cell. ADD G2GNCELL(M andatory) Name ofnumber of a neighboring Uniform a cell cell index within a BSC, which ADD uniquely identifies a cell. G3GNCELL(M The value range of the index of a andatory) 3G external cell is 5048 to 8047. ADD G3GNCELL(M andatory) Name of a neighboring cell NBR2GNCELLNAM Neighbor 2G Cell E Name BSC6900 NBR3GNCELLID Neighbor Cell Index BSC6900 NBR3GNCELLNAM Neighbor Cell E Name BSC6900 NBRCELLSWITCH Neighbor Cell Plan Switch BSC6900 SET BTSAUTOPL ANCFG(Optio nal) When this switch is on, it indicates that the data of the adjacent cell is generated automatically. When this switch is off, it indicates that these data must be configured manually. NBRCI Neighbour Cell CI BSC6900 ADD G2GNCELL(M andatory) Cell ID of a neighboring cell ADD G2GNCELL(M Local Area Code (LAC) of a andatory) neighboring cell ADD G2GNCELL(M Mobile Country Code (MCC) of a andatory) neighboring cell ADD G2GNCELL(M Mobile Network Code (MNC) of a andatory) neighboring cell of the cell Whether the PCU supports the 64 neighboring cells. SET This parameter determines the GCELLGPRS( capability of reporting the number Optional) of the neighboring cellsload of BSC Whether to involve the of the the SET target cell in the algorithm for NC2 BSCPSSOFT cell reselection. If this parameter is PARA(Optiona set to Support, the load of the l) target cell issupport the network Whether to involved in the control 2 (NC2). The NC2 enables SET the network side to control the cell GCELLGPRS( reselection for the MS when the Optional) MS reports thecode that is provided ADD Network color measurement GCELL(Option by the telecom operator. The NCC al) is used to identify networks from ADD area to area. The NCC is unique GEXT2GCEL nationwide. ADD Network color code. It is used to GCELLQUICK uniquely identify different public SETUP(Optio land mobile network (PLMN) of the nal) adjacentNCCs of the cells to be A set of country. SET measured by the MS. This GCELLIDLEB parameter is an information ASIC(Optional element (IE) in the system ) information type 2 and 6 NCC bitmap of the measurement SET report sent by the MS. The MS GCELLEXTM reports only the NCC bitmap of the SRPARA(Opti BSIC and the cell measurement onal) report that matches the bitmap. NBRLAC Neighbour Cell LAC BSC6900 NBRMCC Neighbour Cell MCC BSC6900 NBRMNC Neighbour Cell MNC BSC6900 NBRSPT64 Support 64 Neighbour Cells NC2 Load Reselection Switch BSC6900 NC2LoadResel BSC6900 NC2SPT Support NC2 BSC6900 NCC NCC BSC6900 NCC NCC BSC6900 NCCPERMIT NCC Permitted BSC6900 NCCPERMITED NCC Permitted BSC6900 NCELLFILTER Neighbor Cell Filter Length MR Number BSC6900 NCELLFLTLEN Filter Length for Ncell RX_LEV BSC6900 For the purpose of accurately reflecting the radio environment of SET a network, filtering is performed on GCELLHOFA the measured values in several ST(Optional) consecutive measurement reports. For the purpose of accurately reflecting the radio environment of SET a network, filtering is performed on GCELLHOFIT the measured values in several PEN(Optional) consecutive measurement reports. SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 0 SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 1 SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 2 SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 3 SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 4 SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 5 SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 6 SET OTHSOFTPA Neighboring cell interference level RA(Optional) threshold 7 SET GCELLGSMR Number of blocks occupied by the (Optional) NCH in the group call service SET Number of the start block occupied GCELLGSMR by the NCH in the group call (Optional) service NeighborCell NcellInterFLevelThre Interfere Level s0 Thresh 0 NeighborCell NcellInterFLevelThre Interfere Level s1 Thresh 1 NeighborCell NcellInterFLevelThre Interfere Level s2 Thresh 2 NeighborCell NcellInterFLevelThre Interfere Level s3 Thresh 3 NeighborCell NcellInterFLevelThre Interfere Level s4 Thresh 4 NeighborCell NcellInterFLevelThre Interfere Level s5 Thresh 5 NeighborCell NcellInterFLevelThre Interfere Level s6 Thresh 6 NeighborCell NcellInterFLevelThre Interfere Level s7 Thresh 7 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 NCH Occupy NCHOCBLOCKNUM Block Number BSC6900 NCHSTARTBLOCK NCH Start Block BSC6900 NCO Network Control Mode BSC6900 Network control mode for cell reselection of the MS. There are SET three modes. NC0: normal MS GCELLPSBA control. The MS shall perform SE(Optional) autonomous cell re-selection. NC1: ADD The DSP and OSP are in the N7DPC(Optio associated mode or non associated nal) mode. ADD XPUVLAN(Ma ndatory) IP address mask of the VLAN Minimum interval between two consecutive emergency handovers SET performed by an MS. During this GCELLHOCT interval, no emergency handover is RL(Optional) allowed. ADD OMUIPRT(Ma ndatory) IP address of the next hop. ADD IPRT(Mandato ry) Next hop ADD IPRTBIND(Ma ndatory) Next hop ADD BTSIPRT(Man datory) ADD BTSIPRTBIN IP address of the next hop ADD OPC(Mandato ry) Network ID DLD Name of the file to be downloaded. TCFILE(Mand The file name must be complete atory) and does not contain a wildcard. This parameter is related to the paging channel of the system. SET There are three network operation GCELLPSBA modes: network operation mode I, SE(Optional) network operation mode II, and SET BTSALMPOR No Mains Supply Alarm Cabinet T(Mandatory) No. NEIGHBOR Adjacent flag BSC6900 NETMASK Net Mask BSC6900 NEWURGHOMININ Min Interval for TV Emerg. HO BSC6900 NEXTHOP Forward Route Address BSC6900 NEXTHOP Forward route address BSC6900 NEXTHOP Forward route address BSC6900 NEXTHOP Forward Route Address BSC6900 NI Network ID BSC6900 NM Download file name BSC6900 NMO Network Operation Mode BSC6900 NMSACN No Mains Supply Alarm Cabinet No. BSC6900 NMSAPN No Mains Supply Alarm Port No. BSC6900 SET BTSALMPOR T(Mandatory) No Mains Supply Alarm Port No. SET BTSALMPOR T(Mandatory) No Mains Supply Alarm Slot No. SET BTSALMPOR No Mains Supply Alarm Subrack T(Mandatory) No. SET PWRPARA(O ptional) Lower limit of input voltage 1 SET PWRPARA(O ptional) Upper limit of input voltage 1 SET PWRPARA(O ptional) Lower limit of input voltage 2 SET PWRPARA(O ptional) Upper limit of input voltage 2 SET PWRPARA(O ptional) Lower limit of input voltage 3 SET PWRPARA(O ptional) Upper limit of input voltage 3 SET PWRPARA(O ptional) Lower limit of input voltage 4 SET PWRPARA(O ptional) Upper limit of input voltage 4 SET PWRPARA(O ptional) Lower limit of input voltage 5 NMSASN No Mains Supply Alarm Slot No. BSC6900 No Mains Supply Alarm Subrack No. BSC6900 NMSASRN Lower limit of NO1M48ALMTHDD No.1 input -48V[OWN V] BSC6900 Upper limit of NO1M48ALMTHDU No.1 input -48V[P V] BSC6900 Lower limit of NO2M48ALMTHDD No.2 input -48V[OWN V] BSC6900 Upper limit of NO2M48ALMTHDU No.2 input -48V[P V] BSC6900 Lower limit of NO3M48ALMTHDD No.3 input -48V[OWN V] BSC6900 Upper limit of NO3M48ALMTHDU No.3 input -48V[P V] BSC6900 Lower limit of NO4M48ALMTHDD No.4 input -48V[OWN V] BSC6900 Upper limit of NO4M48ALMTHDU No.4 input -48V[P V] BSC6900 Lower limit of NO5M48ALMTHDD No.5 input -48V[OWN V] BSC6900 Upper limit of NO5M48ALMTHDU No.5 input -48V[P V] BSC6900 Lower limit of NO6M48ALMTHDD No.6 input -48V[OWN V] BSC6900 Upper limit of NO6M48ALMTHDU No.6 input -48V[P V] BSC6900 SET PWRPARA(O ptional) Upper limit of input voltage 5 SET PWRPARA(O ptional) Lower limit of input voltage 6 SET PWRPARA(O ptional) Upper limit of input voltage 6 SET GCELLHOBA Whether to allow non-AMR voice FSIC(Optional) H handover offset of the current Decides the ATCB together with other two SET parameters: "F-H Ho Period" and GCELLHOBA period of triggering a F-H SIC(Optional) handover, thus selecting target When the ATCB value of non-AMR SET full rate voice is no smaller than GCELLHOBA this parameter, the condition for SIC(Optional) non-AMR F-H handovers cost offset Decides the current path is met. together with other two parameters: SET "F-H Ho Period" and period of GCELLHOBA triggering a F-H handover, thus SIC(Optional) selecting target loss valueF-H When the path users for of nonAMR full rate voice is no larger SET than this parameter, the condition GCELLHOBA for non-AMR F-H handovers is SIC(Optional) met. threshold for non-AMR F-H Quality handovers. When the uplink SET receive quality and downlink GCELLHOBA receive quality of a user are both SIC(Optional) smaller than this parameter, a F-H When the load of a cell is no SET smaller than this threshold, nonGCELLHOBA AMR F-H handovers are triggered SIC(Optional) in the cell. When the ATCB value of non-AMR SET half rate voice is no larger than this GCELLHOBA threshold, the condition for nonSIC(Optional) AMR H-F handovers is met. nonWhen the path loss value of AMR half rate voice is no smaller SET than this threshold, the condition GCELLHOBA for non-AMR H-F handovers is SIC(Optional) met. NOAMRFULLTOHA Non-AMR F-H Ho LFHOALLOW Allowed BSC6900 NOAMRFULLTOHA Non-AMR F-H Ho LFHOATCBADJSTE ATCB Adjust P Step BSC6900 NOAMRFULLTOHA LFHOATCBTHRES Non-AMR F-H Ho H ATCB Threshold BSC6900 NOAMRFULLTOHA Non-AMR F-H Ho LFHOPATHADJSTE Pathloss Adjust P Step BSC6900 NOAMRFULLTOHA Non-AMR F-H Ho LFHOPATHTHRES Pathloss H Threshold BSC6900 NOAMRFULLTOHA LFHOQUALTHRES Non-AMR F-H Ho H Qual. Threshold BSC6900 NOAMRFULLTOHA Non-AMR F-H LFTHRESH Traffic Threshold BSC6900 NOAMRHALFTOFU Non-AMR H-F Ho LLHOATCBTHRESH ATCB Threshold BSC6900 Non-AMR H-F Ho NOAMRHALFTOFU Pathloss LLHOPATHTHRESH Threshold BSC6900 Allow Non-AMR NOAMRHALFTOFU H-F QualityLLHOQUALALLOW based HO BSC6900 NOAMRHALFTOFU LLHOQUALTHRES Non-AMR H-F Ho H Qual. Threshold BSC6900 SET Whether to trigger non-AMR H-F GCELLHOBA handovers according to the uplink SIC(Optional) and downlink receivenon-AMR H-F Quality threshold for quality handovers. When the receive SET quality of a user is no smaller than GCELLHOBA this parameter, the user meets the SIC(Optional) condition for H-F handovers. SET When the load of a cell is no larger GCELLHOBA than this threshold, non-AMR H-F SIC(Optional) handovers are triggered in the cell. ADD ADJNODE(Ma ndatory) Type of the adjacent node Decisions of no-downlink measurement report handovers SET can be made only when the GCELLHOEM number of consecutive no-downlink G(Optional) measurement reports in the current SET Whether to enable the no-downlink GCELLHOEM measurement report handover G(Optional) algorithm When a certain number of nodownlink measurement reports are SET received consecutively and the GCELLHOEM uplink receive quality is no smaller G(Optional) than this parameter, no-downlink Normal output capacity of the battery group in specific SET discharging conditions (such as BTSPMUBP( discharge rate, temperature, and Optional) final voltage). Generally, the Whether to enable the III power SET control algorithm for Non-AMR GCELLPWR3( calls. If enabled, power control is Optional) performed on Non-AMR calls. SET GCELLNWCT RLMSRPARA( Period when the cell is in the nonOptional) DRX state ANT_A tributary antenna When the current abnormally check mode is SET set to Mode 3, the parameter ALD BTSRXUBP(O Current Prompt Alarm is checked ptional) by periodical pulse. The periodical When the ANT_B tributary antenna current abnormally check mode is SET set to Mode 3, the parameter ALD BTSRXUBP(O Current Prompt Alarm is checked ptional) by periodical pulse. The periodical NOAMRHALFTOFU Non-AMR H-F LLTHRESH Traffic Threshold BSC6900 NODET Adjacent Node Type BSC6900 Cons.No Dl NODLMRHOALLOW Mr.HO Allowed LIMIT Limit BSC6900 NODLMRHOEN No Dl Mr.HO Allowed BSC6900 NODLMRHOQUALLI No Dl Mr.Ul Qual MIT HO Limit BSC6900 NOMINALCAPACIT Norminal Y Capacity{AH} BSC6900 Allow III Power NONAMRCALLPCA Control For NonLLOWED AMR BSC6900 NONDRXPERIOD Non-DRX Period BSC6900 A ALD Cur-Minor Alarm N-Cur Duration BSC6900 B ALD Cur-Minor Alarm N-Cur Duration BSC6900 NormalCurDurA NormalCurDurB Cell Normal NORMALRESELALL Reselection OW Allowed BSC6900 Whether to allow the cell normal reselection. If this parameter is set SET to PERMIT and "NC2 Load GCELLNC2P Reselection Switch" is set to ARA(Optional) Support, the load of the target cell SET BTSCABPAR Normal work temperature threshold A(Optional) of the cabinet Whether to discard paging messages without TMSIs and allSET cell paging messages that OTHSOFTPA considerably increase the load on RA(Optional) the BSC system of measurement Maximum number periods in which there is no traffic. SET If the number of measurement GTRXRLALM( periods in which there is no traffic Optional) reaches this parameter, the mode If the BTS works in fallback BTS and uplink VGCS connection is idle SET for a period specified by this BTSFALLBAC parameter, the BTS disables the K(Optional) VGCS connection automatically. TRC IPADDR(Optio Number of TRACERT packets sent nal) to each purpose of accurately For the TTL reflecting the radio environment of SET a network, filtering is performed on GCELLHOFIT the measured values in several PEN(Optional) consecutive measurement reports. For the purpose of accurately reflecting the radio environment of SET a network, filtering is performed on GCELLHOFIT the measured values in several PEN(Optional) consecutive measurement reports. ADD Network resource indication that NRIMSCMAP( specifies a CN node in the MSC Mandatory) pool ADD Identifies the mapping relation from NRISGSNMA the NRI to the SGSN uniquely with P(Mandatory) the operator name of the Controls the values FDD_Indic0 field, the SET NR_OF_FDD_CELLS field, and the OTHSOFTPA FDD_Cellinformation field in RA(Optional) 2quater and MI when 3G ADD NSE(Mandato ry) ADD NSVC(Mandat Identifies a unique NSE NORTHD Normal Work TEMP Threshold BSC6900 NOTMSIALLCELLP Discard TMSI All AGINGLIMITFLAG Cell Paging BSC6900 NOTRASP Statistical Period of No-traffic BSC6900 No VGCS Call Time Number of TRACERT Packages Per NQUERIES TTL Filter Length for SDCCH NBR_RCVD_BL NRBSDCCHFFLEN OCK Filter Length for TCH NBR_RCVD_BL NRBTCHFFLEN OCK NOVGCSTIME BSC6900 BSC6900 BSC6900 BSC6900 NRI NRI Value BSC6900 NRI NRI Value BSC6900 NRofFDDCellFlag Support NR_of_FDD_cell s Writing BSC6900 NSEI NSE Identifier BSC6900 NSEI NSE Identifier NCell Filter Length for SDCCH Level BSC6900 NSIGSTRFLTLEN BSC6900 ADD GCELLQUICK The identifier of a network service SETUP(Optio entity (NSE).An NSE manages a nal) group of NSVCs.of accurately For the purpose reflecting the radio environment of SET a network, filtering is performed on GCELLHOFIT the measured values in several PEN(Optional) consecutive measurement reports. SET GCELLLCS(O Whether the cell is located in the ptional) south latitude or north latitude ADD NSVC(Mandat ory) ADD NSVC(Mandat ory) BLK NSVC(Mandat NSVC ID, identifies a unique NSVC. This ID must be negotiated with the peer SGSN. NSLATI NS Latitude BSC6900 NSVCI NSVC Identifier BSC6900 NSVCIDX NSVC Index Normal Temperature Delta Tin Normal Temperature Delta Tout BSC6900 NTDI BSC6900 NTDO BSC6900 NSVC index, identifies a unique NSVC. If the inlet temperature is between "High Temperature Critical Point" SET and "Low Temperature Critical BTSDHEUBP( Point" and the difference between Optional) the inlet temperature and the If the outlet temperature is between "High Temperature Critical Point" SET and "Low Temperature Critical BTSDHEUBP( Point" and the difference between Optional) the outlet temperature and the inlet SET GCELLGSMR Number of retransmissions of the (Optional) VGCS UPLINK GRANT message SET Ratio of the minimum guarantee ETHPORT(Op bandwidth of the OAM stream to tional) the port bandwidth ADD PPPLNK(Opti Minimum guarantee bandwidth of onal) the OAM stream ADD MPGRP(Optio Minimum guarantee bandwidth of nal) the OAM stream ADD IPLOGICPOR Minimum guarantee bandwidth of T(Optional) the OAM stream NY2 Ny2 BSC6900 OAMFLOWBW OAM flow min bandwidth[%] BSC6900 OAMFLOWBW OAM flow min bandwidth[%] BSC6900 OAMFLOWBW OAM flow min bandwidth[%] BSC6900 OAMFLOWBW OAM flow min bandwidth[%] BSC6900 OAMFLOWBW OAM flow min bandwidth[%] BSC6900 OAMFLOWDSCP DSCP of OAM flow BSC6900 ADD Ratio of the minimum guarantee ETHTRK(Opti bandwidth of the OAM stream to onal) the port bandwidth OAM stream. DSCP value of the The data of the OAM stream are SET not added to queues 0 to 5 for QUEUEMAP( transmission. Instead, the data of Mandatory) the OAM stream is added to the SET QUEUEMAP( Optional) SET BTSANTANG LE(Mandatory ) STR TRXBURSTT ST(Mandatory ) ADD OBJALMSHL D(Mandatory) ADD BTSOBJALM SHLD(Mandat ory) SET FHO(Mandato ry) SET GCELLPSOT HERPARA(Op tional) OAMMINBWKEY OAM flow min bandwidth switch BSC6900 Minimum guarantee bandwidth switch of the OAM stream OBJECTTYPE Operate Object BSC6900 Operation object OBJECTTYPE Object Type BSC6900 Type of the object Shield type of the alarm. "ALL" indicates one shield type instead of all types. OBJTP Object Type BSC6900 OBJTP Object Type BSC6900 Type of the alarm shield object OBJTYPE Object Type BSC6900 Preempt Switch OccupyStreamingSw of Streaming itch Resource BSC6900 Object index types used when commands are executed When the PDCHs are insufficient, the streaming service with high priority can preempt the PDCHs that are seized by the streaming service with low priority. After the OL to UL HO OLTOULHOALLOW Allowed BSC6900 OMLBKUP Configure Backup OML BSC6900 OMLDETECTSWIT CH OML Detection Switch BSC6900 SET GCELLHOIUO Whether to allow overlay-to(Optional) underlay handovers This parameter specifies whether to configure the backup OML. SET When YES is configured in the BTSOMLBAC BTS, an OML is configured in KUP(Optional) timeslotDetection Switch is set to If OML 31 of port 0 and port 1 SET OFF, then the OML timeslot BTSOMLDET automatic detection is not ECT(Mandator supported. In this case, the OML is y) carried on the default timeslots. If OmlDetectTime OML Lapd Link Detect Time BSC6900 SET This parameter specifies the OTHSOFTPA detecting time of Abis-Bypass site RA(Optional) OML when it is broken. SET BSCABISPRI Differentiated service code of the MAP(Optional) specified OML SET The summation of average downBTSBWPARA bandwidth of OML&ESL link in (Mandatory) BTS. SET The summation of average upBTSBWPARA bandwidth of OML&ESL link in (Mandatory) BTS. SET BSCABISPRI Service priority of the specified MAP(Optional) OML of services on the OML. Priority The operation and maintenance SET link (OML) is used to transfer the BSCSRVPRI( OM information between the Optional) BSC6900 and BTS. This parameter SET BSCABISPRI MAP(Optional) Specified OML Vlan Id SET BTSLAPDWS( Size of the OML/ESL/EML Optional) Downlink LAPD window ADD EMSIP(Option External virtual IP address of the al) OMU ADD EMSIP(Option al) EXP LOG(Optional) ADD OP(Mandatory ) ADD GCELLOSPM AP(Mandatory ) OMLDSCP OML DSCP BTS OML&ESL Average Downbandwidth BTS OML&ESL Average Upbandwidth BSC6900 OMLESLDL BSC6900 OMLESLUL BSC6900 OMLPRI OML Priority BSC6900 OMLSP OML Service PRI BSC6900 OMLVLANID OML VlanId OML/ESL/EML LAPD Downlink Window Size OMU External Network Virtual IP BSC6900 OMLWS BSC6900 OMUIP BSC6900 OMUMASK OMU External Network Mask BSC6900 Subnet mask of the OMU in the external network OP Operator BSC6900 OPC OSP Code BSC6900 Account thethe operator Code of of original signaling point (OSP) in the signaling network. In the signaling network, each signaling point is identified by a signaling point code. OPC OSP Code BSC6900 OPCIDX OPC Index BSC6900 OperatorType Operator Type BSC6900 OPINDEX Operator Index BSC6900 ADD GCELLQUICK SETUP(Mand atory) BLK ACIC(Mandat ory) ADD AE1T1(Manda ADD GCNOPERAT OR(Mandatory ) ADD GCNOPERAT OR(Mandatory ) Code of the signaling point of the local office in the signaling network. In the signaling network, each signaling point has a corresponding signaling point code. Uniquely identifies an OSP. see "ADD OPC" command. Primary operator or secondary operator. Primary operator is an operator that provides equipment, whereas secondary operator is an operator Index of the operator. This parameter uniquely identifies an operator. OPINDEXSET OP INDEX SET BSC6900 OPMODE Operation Mode BSC6900 OPMODE Operation Mode BSC6900 OPMODE Operation Mode BSC6900 ADD GCBSADDR( Operator index set to which the Mandatory) CBC belongs It is one key filed of identifying A BLK interface CIC status and indicates ACIC(Mandat the alignment mode of A interface ory) circuit. It is one key filed of identifying Ater BLK interface timeslot status and ATERE1T1(M indicates the alignment mode of andatory) Ater interface circuit. It is one key filed of identifying A BLK interface timeslot status and AE1T1(Manda indicates the alignment mode of A tory) interface circuit. BLK PBCIC(Manda tory) ADD GCNNODE(M andatory) ADD GCNOPERAT It is one key filed of identifying Pb interface CIC status and indicates the Pb interface CIC. OPMODE Operation Mode BSC6900 OPNAME Operator Name BSC6900 OPTILAYER Assign Optimum Layer BSC6900 OPTILEVTHRES Assign-optimumlevel Threshold BSC6900 Name of the operator. This parameter uniquely identifies an operator assignment policies used Channel when TCHs are assigned in an IUO SET cell: SysOpt: The system selects GCELLHOIUO the preferentially-assigned service (Optional) layer and assigns channels Preferentially assigns channels on the overlay when the uplink receive SET level on the SDCCH is no smaller GCELLHOIUO than "Assign-optimum-level (Optional) Threshold" and the TA is smaller OPTITATHRES TA Threshold of Assignment Pref BSC6900 OPTL TRX Priority BSC6900 Preferentially assigns channels on the overlay when the uplink receive SET level on the SDCCH is no smaller GCELLHOIUO than "Assign-optimum-level (Optional) Threshold" and the TA is the TRX This parameter specifies smaller priority in channel assignment. The SET smaller this parameter is, the GTRXDEV(Op higher the TRX priority is. For two tional) TRXs with other conditions OPTM Optical interface standard BSC6900 SET OPT(Optional) Optical interface standard SWP BTSBRD(Man datory) Type of the operation SET BTSFORBIDT The operation type can be S(Mandatory) "FORBID" or "RESTORE". ADD GNRNC(Mand atory) ADD BTSTOPCON FIG(Mandator y) CON PATCH(Optio nal) LOD PATCH(Optio ADD GCELLQUICK SETUP(Optio nal) OPTP Operation Type BSC6900 OPTYPE Operate Type BSC6900 OPX OPX BSC6900 ORIPORT Originally E1/T1 Port No. BSC6900 Iur-g signaling point index of an internal Type" in GU to If "Port RNC is set mode "TOPEXTOUTPORT", this parameter determines the extended E1/T1 port through which the timeslots on the source E1/T1 OT Operation type BSC6900 OTHERFREQ Other Frequency BSC6900 OtoU HO Received Level Threshold UL Subcell Assignment Optimization OTOURECEIVETH BSC6900 OUTASSOPTEN BSC6900 OUTBSCHOCLEAR TIMER T8 BSC6900 Operation type of the command. Ordinary frequency. Multiple frequencies are separated by "&". For example, "22&33&44&55" are allocated to TRXs in ascending order. the parameters that decide One of the underlay and overlay areas in SET an enhanced IUO cell. The GCELLHOIUO underlay and overlay areas are (Optional) decided by "OtoU HO Received Whether to assign channel SET requests initiated in the underlay GCELLHOED subcell to the overlay or underlay BPARA(Optio subcells according to "UL Subcell nal) General Overload to set the time the The timer is used Threshold". If when the BSC6900 waits for a SET handover success message after a GCELLTMR( handover command is sent in an Optional) outgoing BSC handover. If the OUTBSCHOCMDTI MER T7 Inter BSC Load Information Allowed BSC6900 SET GCELLTMR( Optional) SET GCELLHOAD( Optional) SET GCELLHOED BPARA(Optio nal) SET GTRXDEV(Op tional) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) SET GCELLHOED BPARA(Optio nal) The timer is used to set the time when the BSC6900 waits for an HO REQ ACK message after a Handover Request message is reported in an outgoing BSC Whether to use external 2G neighboring cells as the target cells of loadthe load of the underlay When handovers subcell is higher than this parameter, some of the calls in the underlay subcell will be switched to the overlay subcell, and channels Power overload threshold for triggering outgoing handover from the TRX under the prerequisite that the power amplifier of the TRX provides the maximum overlay level Lower threshold of the output during overlay-to-underlay handovers. When the receive level of an MS is higher than this threshold, the MS can beof the Whether to switch some switched calls in the underlay subcell to the overlay when the load of the underlay is higher than this parameter If the underlay load is higher than "UL Subcell Serious Overload Threshold", the underlay-to-overlay handover period subtracts a value that equals this of the underlay "UL When the load threshold from subcell exceeds "UL Subcell General Overload Threshold", all the calls that are using this cell as the serving cell generate handover OutBscLoadHoEn BSC6900 UL Subcell OUTGENOVERLDT General Overload HRED Threshold BSC6900 Power Overload OUTHOPWROVERL Threshold In Ho. OADTHRESHOLD Out BSC6900 Outgoing OL OUTINNREXLEVTH Subcell HO Level RED TH BSC6900 OUTLOADHOENAB Load HO LE Allowed MOD Step LEN OUTLOADHOMODP of UL Load HO ERI Period BSC6900 BSC6900 OUTLOADHOPERI OD UL Subcell Load Hierarchical HO Periods BSC6900 Step Length of UL Subcell Load OUTLOADHOSTEP HO BSC6900 OUTLOWLOADTHR UL Subcell Lower ED Load Threshold BSC6900 Level step during underlay-tooverlay hierarchical load handovers When the load of the underlay subcell is lower than this parameter, some of the calls in the overlay subcell will be switched to the underlay subcell, and channels OUTMASK Out BSC Mask BSC6900 ADD SEMILINK(Op Specifies the timeslot mask out tional) BSC6900 ADD SEMILINK(Ma ndatory) Outgoing BSC6900 port number OUTPN Out BSC Port No. BSC6900 OUTPORTNO DXX Out Port No. BSC6900 OUTPORTTS DXX Out Time Slot No. Cannel 0 Digital Control Signal Level Cannel 1 Digital Control Signal Level Cannel 2 Digital Control Signal Level Cannel 3 Digital Control Signal Level BSC6900 ADD DXXTSEXGR ELATION(Man datory) ADD DXXTSEXGR ELATION(Man datory) SET BTSDTMUBP( Optional) SET BTSDTMUBP( Optional) SET BTSDTMUBP( Optional) SET BTSDTMUBP( Optional) ADD BTSLOCGRP( Mandatory) Number of the outgoing port of the DXX OUTPUT0 BSC6900 OUTPUT1 BSC6900 OUTPUT2 BSC6900 OUTPUT3 BSC6900 OUTPUTPOWER Output Power BSC6900 Number of the outgoing timeslot of the DXX Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. Otherwise, it should be set to 1. Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. Otherwise, it should be set to 1. Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. Otherwise, it should be set to 1. Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. Otherwise, it should be set togroup. Output power of the location 1. For a location group that consists of MRRU or GRRU boards, the default output power is 15W. For a location group that consists of OUTPUTPOWER1 Output Power BSC6900 ADD BTSLOCGRP( Mandatory) Output power of the location group ADD BTSLOCGRP( Optional) SET GCELLHOED BPARA(Optio nal) OUTPUTPOWERUN Output Power IT Unit BSC6900 UL Subcell OUTSERIOVERLDT Serious Overload HRED Threshold BSC6900 Cell Out-ofService Alarm Switch Output power unit of the location group the load of the underlay When subcell is higher than this parameter, the underlay-to-overlay load handover period subtracts a period that equals "Step Length of OUTSERVICEALM BSC6900 SET Whether to report a cell out-ofGCELLSOFT( service alarm after a cell is out of Optional) service ADD SEMILINK(Ma ndatory) Outgoing BSC6900 slot number OUTSN Out BSC Slot No. BSC6900 OUTSN Load Outlet Slot No. BSC6900 ADD ABISLOADSH ARE(Mandato Slot number of the load outlet ry) interface board ADD SEMILINK(Ma ndatory) SET GCELLHOINT ERRATLDB(O ptional) OUTSRN Out BSC Subrack No. BSC6900 Allow Inter-RAT Load HO in Connect State OutSysLoadHoEn BSC6900 OUTSYSSERVHOR Service Handover EASSIGNEN Reassign BSC6900 OUTSYSSERVICEH Service Based OEN Handover Switch BSC6900 Outgoing BSC6900 subrack number This parameter specifies whether to allow the inter-RAT load handover in connection mode (after the assignment is complete). When the Service Handover field in an ASS REQ message is 0, a SET direct retry process targeted at a OTHSOFTPA 3G network is initiated. If the direct RA(Optional) retry fails, the system is set to When this parameter decides Open, the BSS decides whether to SET hand over the current service to OTHSOFTPA the 3G network according to the RA(Optional) contents of the "Service Handover" ADD Validity period for the BSC to keep GNRNC(Optio the load information about a 3G nal) neighboring cell on the RNC ADD SEMILINK(Ma Outgoing BSC6900 start timeslot ndatory) number Abnormally alarm raise threshold triggered by too heavy current of SET the ANT_A tributary antenna. BTSRXUBP(O When the actual current is higher ptional) than the configured value, the ALD Abnormally alarm raise threshold triggered by too heavy current of SET the ANT_B tributary antenna. BTSRXUBP(O When the actual current is higher ptional) than the configured value, the ALD Abnormally alarm raise threshold triggered by too heavy current of SET the RET tributary antenna. When BTSRXUBP(O the actual current is higher than the ptional) configured value, the ALD Current Abnormally alarm clearance threshold triggered by too heavy SET current of the ANT_A tributary BTSRXUBP(O antenna. When the actual current ptional) is lower than the configured value, Abnormally alarm clearance threshold triggered by too heavy SET current of the ANT_B tributary BTSRXUBP(O antenna. When the actual current ptional) is lower than the configured value, OUTTIMER Load Info Timeout Timer BSC6900 OUTTSN Out BSC Start Timeslot No. BSC6900 OverCurAlmThdA ANT_A ALD Over Current Occur Threshold BSC6900 ANT_B ALD Over Current Occur Threshold BSC6900 OverCurAlmThdB RET ALD Over Current Occur OverCurAlmThdRET Threshold BSC6900 OverCurClrThdA ANT_A ALD Over Current Clear Threshold BSC6900 ANT_B ALD Over Current Clear Threshold BSC6900 OverCurClrThdB OverCurClrThdRET RET ALD Over Current Clear Threshold BSC6900 SET BTSRXUBP(O ptional) SET BTSRXUBP(O ptional) SET BTSRXUBP(O ptional) SET GCELLCCCH( Optional) OverCurDurA A ALD Cur-Minor Alarm Over-Cur Duration BSC6900 B ALD Cur-Minor Alarm Over-Cur Duration BSC6900 OverCurDurB OVERLOADINTV Overload Indication Period BSC6900 Abnormally alarm clearance threshold triggered by too heavy current of the RET tributary antenna. When the actual current is lower than the configured value, When the ANT_A tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical When the ANT_B tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical Interval for the BTS transmitting overload messages to the BSC6900. This parameter is used to control the reporting frequency of overload messages by the channel OVERTHD Derating TEMP Threshold CPU Usage for Critical Paging FC BSC6900 P11 BSC6900 P12 CPU Usage for Major Paging FC BSC6900 P13 CPU Usage for Minor Paging FC BSC6900 P14 CPU Usage for Slight Paging FC BSC6900 PaAdjVol PA Intelligent Adjust Voltage BSC6900 Move Packet Assignment PACKASSDLSHIFT Down to BTS BSC6900 SET BTSCABPAR Temperature threshold of the A(Optional) derating function of the cabinet Threshold for critical flow control. When the usage of the CPU SET exceeds the threshold, the CPUS BSCFCPARA( performs critical flow control for Optional) paging messages. flow control. Threshold for major When the usage of the CPU SET exceeds the threshold, the CPUS BSCFCPARA( performs major flow control for Optional) paging messages. flow control. Threshold for minor When the usage of the CPU SET exceeds the threshold, the CPUS BSCFCPARA( performs minor flow control for Optional) paging messages. flow control. Threshold for slight When the usage of the CPU SET exceeds the threshold, the CPUS BSCFCPARA( performs slight flow control for Optional) paging messages. This parameter specifies whether the multi-carrier transceiver unit SET supports the Multi-Carrier BTSOTHPAR Intelligent Voltage Regulation A(Optional) feature. to support the function of Whether SET moving the packet assignment GCELLPSOT down to the BTS. To improve the HERPARA(Op access speed of the MS, after the tional) packet assignment is moved down SET Average number of paging GCELLSOFT( messages allowed in a cell in a Optional) period Average Paging PAGINGAVGCAPAC Message Number ITYINPERIOD In Period BSC6900 PAGINGLIFETIME BTS Paging Lifetime BSC6900 Lifetime of a paging message in the queue of the BTS. The setting SET of this parameter must be GCELLSOFT( consistent with the setting of timer Optional) T3113 in the core network; SET GCELLSOFT( Optional) SET GCELLCCBA SIC(Optional) SET GCELLPSBA SE(Optional) SET GCELLPSBA SE(Optional) SET GCELLPSBA SE(Optional) SET GTRXDEV(Op tional) SET BTSAUTODL DACTINFO(M andatory) SET BTSAUTODL DACTINFO(M andatory) Maximum number of paging messages allowed in a cell in a period BTS, this parameter is For the used to determine paging retransmissions. This parameter and the number of paging times configured in the MSC determine This parameter sets the PAN_DEC value used by the counter N3102 of the MS. When the timer T3182 of the MS expires, the N3102 reduces the value of PAN_DEC. 0: the This parameter sets the PAN_INC value used by the counter N3102 of the MS. When receiving the packet uplink acknowledged or unacknowledged message sent by RAN_MAX value, the maximum value of the N3102. 4: the value of PAN_MAX is 4; 32: the value of PAN_MAX is 32. Value N indicates that PAN_DEC which Not BSC this Priority level at is N; the use: shuts down the power amplifier of the TRX when the intelligent shutdown function is enabled. If this parameter is set smaller, the PAGINGMAXCAPA CITYINPERIOD MAX Paging Message Number In Period BSC6900 PAGTIMES Paging Times BSC6900 PANDEC PAN_DEC BSC6900 PANINC PAN_INC BSC6900 PANMAX PAN_MAX BSC6900 PAOPTILEVEL Priority of Shut Down TRX BSC6900 PatchNo Patch No. BSC6900 Patch number of the TMU board software PatchNo1 Patch Number BSC6900 Patch number of the TMU board software PATHCHK IP path check flag BSC6900 ADD IPPATH(Optio nal) IP path check flag ADD IPPATH(Mand atory) Uniquely identifies an IP path ADD IPMUX(Manda tory) ADD IPPATHBIND( IP path ID,Identifying an IP path. PATHID IP path ID BSC6900 PATHID IP path ID BSC6900 PATHLOSS Path Loss of Different Frequency Band BSC6900 SET GCELLPWRB Transmission loss difference ASIC(Optional between radio frequencies on ) different bands SET Whether to perform path lossGCELLHOBA based sorting in a better cell SIC(Optional) handover algorithm ADD IPPATH(Optio nal) CON PATCH(Optio nal) LOD PATCH(Optio SET GCELLPSPW PARA(Optiona l) SET GCELLHOBA SIC(Optional) ADD G2GNCELL(O ptional) ADD G2GNCELL(O ptional) ADD G2GNCELL(O ptional) SET OTHSOFTPA RA(Optional) SET GCELLPWRB ASIC(Optional ) SET GCELLPSPW PARA(Optiona l) PATHLOSSHOEN Pathloss Ho. Enable BSC6900 PATHT IP path type BSC6900 Type of the IP path PATTYPE Patch type BSC6900 Patch type PB Pb BSC6900 PBGTHOEN PBGT HO Allowed BSC6900 PBGTLAST PBGT Valid Time BSC6900 PBGTMARGIN PBGT HO Threshold BSC6900 PBGTSTAT PBGT Watch Time BSC6900 PbMtnMsgReSend MAX Retrans Maintenance Msg on Pb-I BSC6900 BTS power attenuation on the measured PBCCH PBGT Whether to use the handover algorithm. PBGT handovers are based on path loss. The PBGT handover algorithm searches in real time forhandovers The triggering of PBGT cells that must meet the P/N criteria, that is, when the condition for PBGT handovers is met for a consecutive P seconds during to seconds, a PBGT handovers N a neighboring cell are allowed only when the downlink level difference between the neighboring cell and the serving cell is larger thanPBGT handovers The triggering of this parameter. must meet the P/N criteria, that is, when the condition for PBGT handovers is met for a consecutive P secondstimes for an external Maximum during N seconds, a PCU to retransmit a PB interface maintenance message. When the PCU fails to receive a response to a PB interface maintenance Minimum interval between two consecutive power control commands Channel used for the measured receiving power. It is used to set the measured receiving power level of the channel and control the power of the uplink. PCADJPERIOD PC Interval BSC6900 PCMEASCHAN PC_MEAS_CHA N BSC6900 PCU PCU No BSC6900 It is one key filed of identifying Pb BLK interface CIC status and indicates PBCIC(Manda the PCU No. corresponding to the tory) Pb interface CIC. ADD PCU(Mandato PCU number, identifying a unique ry) PCU. ADD PBE1T1(Mand Port number of the E1/T1 of the Pb atory) interface SET GCELLGPRS( Mandatory) SET BTSFLEXABI SPARA(Optio nal) SET GCELLPSCH M(Optional) SET GCELLSOFT( Optional) SET GCELLPSCH M(Optional) SET GCELLPSCH M(Optional) PCUINDEX PCU No. BSC6900 PCUNO PCU No. BSC6900 PCUNO PCU No. BSC6900 PCUPREEMPTFLA G PCU Support PREEMPT_ABIS _LINK Message BSC6900 PDCH Downlink Multiplex Threshold PDCHDWNLEV BSC6900 PDCHPWRSAVEN PDCH Power Saving Enable BSC6900 PDCHREFORMING PDCH Reforming BSC6900 PDCH Uplink Multiplex Threshold PDCHUPLEV BSC6900 Number of the PCU to which the current cell belongs Whether the PCU supports the PREEMPT_ABIS_LINK message. If the BTS supports the FLEXABIS function, the CS service can preempt the timeslots on the Abis PDCH downlink multiplex threshold, Indicating the maximum TBFs on the downlink PDCH (parameter value/10). This parameter specifies whether to enable the Power Optimization Based on Channel Type feature. The working voltage of the TRX varies with the modulation mode of Whether to preempt the channels carrying the CS service when the channels for the PS service are insufficient "Level of Preempting Dynamic Channel" is set to PDCH uplink multiplex threshold, indicating the maximum TBFs on the uplink PDCH (parameter value/10). PDTMRVALUE PENDING timer BSC6900 ADD M3LKS(Option al) Pending timer of the M3UA link set SET GBSCREDGR P(Mandatory) Peer BSC identity SET BTSIP(Mandat ory) ID of the peer BSC6900 PeerBSCID Peer BSC ID BSC6900 PEERBSCID Peer BSC ID BSC6900 PEERBSCIP Peer BSC IP BSC6900 SET BTSIP(Mandat IP address of the peer BSC6900 ory) on the homing BSC6900 side SET BTSIP(Mandat Subnet mask of the port IP address ory) at the peer BSC6900. SET BTSIP(Mandat Identifier of the peer BTS on the ory) homing BSC6900 side ADD Peer IP address of the PPP link. PPPLNK(Man The IP address of the PPP link on datory) the peer side of the BSC. ADD MPGRP(Mand atory) Peer IP address of the MP group. STR IPCHK(Manda Detects the IP address of the tory) gateway ADD BTSPPPLNK( IP address of the peer end of BTS Mandatory) PPP Link. ADD BTSMPGRP( IP address of the peer end of BTS Mandatory) MLPPP Group. ADD SCTPLNK(Ma First destination IP address. The ndatory) invalid value is 0. ADD SCTPLNK(Opt Second destination IP address. ional) The invalid value is 0. ADD IPPATH(Mand The peer IP address should not be atory) the same as the local address. ADD IPPATH(Optio nal) Subnet mask of the peer IP PEERBSCMASK Peer BSC Mask BSC6900 PEERBTSID Peer BTS ID BSC6900 PEERIP Peer IP address BSC6900 PEERIP Peer IP address BSC6900 PEERIP Peer IP address BSC6900 PEERIP Peer IP Address BSC6900 PEERIP Peer IP Address BSC6900 PEERIP1 First destination IP address Second destination IP address BSC6900 PEERIP2 BSC6900 PEERIPADDR Peer IP address BSC6900 PEERMASK Peer subnet mask BSC6900 PEERPN Destination SCTP port No. BSC6900 PEERVERSION Peer Version BSC6900 PENALTYEN Penalty Allowed BSC6900 PENALTYLASTTM Cell Penalty Duration BSC6900 PENALTYRXLEV Cell Penalty Level BSC6900 ADD SCTPLNK(Ma ndatory) Destination SCTP port number SET BTSLOADCT RL(Mandatory ) Peer Software Version target cell Whether to punish the when a handover fails or to punish SET the current serving cell when a GCELLHOCT handover is of more TA or bad RL(Optional) quality. duration for cell Penalty reselection. Cell penalty can be SET performed only in this duration. GCELLNC2P When this parameter is set to a ARA(Optional) greater value, reselection failure When the cell the MS cannot message is received or the load SET cell reselection is initiated, the "Cell GCELLNC2P Penalty Level" is subtracted from ARA(Optional) the receive level of the target cell to SET Timer of penalty on a neighboring GCELLHOFIT cell when a handover fails due to PEN(Optional) faults of data configration. ADD IPPATH(Optio nal) Ping check period of IP Path STR NCS(Mandato Measurement period for each ry) frequency group ADD PPPLNK(Opti Compression flag of the PPP link onal) protocol domain ADD MPGRP(Optio nal) ADD BTSPPPLNK( Optional) ADD BTSMPGRP( PENALTYTIMER CfgPenaltyTimer BSC6900 PERIOD Ping Check Period BSC6900 PERIOD Measurement Period BSC6900 PFC Protocal field compress BSC6900 PFC Protocol field compress BSC6900 Compression flag of the PPP link protocol domain PFC Support Protocol Field Compress BSC6900 PFCSUP PFC Support BSC6900 Whether to compress the protocol field of the PPP link. Whether to support packet flow context (PFC). The PFC flow is ADD used to control the QoS of the NSE(Optional) packet service of the MS. Paging Message PGCLASSIFINGALL Classifying OWED Allowed BSC6900 Max Paging PGMAXMSGNUMIN Message Num in PERIOD Period BSC6900 Whether to support the paging message classification function: SET 0,close; BSCFCPARA( 1,paging message classification Optional) flow control; Maximum number of paging SET messages that the BSC6900 can BSCFCPARA( process over the A interface within Optional) a measurement period SET BSCFCPARA( Measurement period for calculating Optional) the arrival rate of paging messages SET PHBMAP(Man Value of the per-hop behavior datory) (PHB) ADD IPMUX(Manda tory) SET GCELLIDLEB ASIC(Optional ) PGSTATPERIOD Paging Statistical Period BSC6900 PHB Per-Hop Behavior BSC6900 PHB PHB Cell Reselect Parameters Indication Private Key Password Enabled State BSC6900 PI BSC6900 PKPEnableSta BSC6900 PKTCOUNT PKT Count BSC6900 PKTLEN PKT Size[Byte] BSC6900 PHB type of the IPMUX to be enabled Cell Reselect Parameters Indication (PI), sent on the broadcast channel, indicates whether "Cell Reselect Offset", "Cell Reselect Temporary Offset" in Whether to enable the private key password SET DISABLE: indicating that the CERTFILE(Op private key password is disabled tional) ENABLE: indicating that the private STR ETHOAMLOO Indicates the number of the PTST(Optiona packets for remote loopback test of l) the OAM in the Ethernet STR ETHOAMLOO Indicates the length of the packets PTST(Optiona for the remote loopback test of the l) OAM in the Ethernet STR FRPORTLOO P(Mandatory) ADD BTSABISMUX FLOW(Option al) PKTLEN Packet Length BSC6900 PKTLENTHRES Maximum Frame Length BSC6900 PKTSI PACKET SI BSC6900 Loopback packet length Maximum multiplexing frame length. The length of the multiplexed packet must not exceed the maximum multiplexing frame length.cell supports of the Whether the If the length the PACKET SI STATUS flow. In the SET PACKET SI STATUS flow, the MS GCELLGPRS( sends the Packet PSI/SI Status Optional) message to indicate that the MS PKTSIZE Size of packet BSC6900 PKTSIZE PKT Size BSC6900 PING IP(Optional) PING MAC(Optional ) PING BTSCFM(Opti SET GCELLPRAC H(Optional) SET GTRXDEV(Op tional) SET GCELLPRAC H(Optional) SET GCELLPRAC H(Optional) SET GTRXDEV(Op tional) SET GCELLPRAC H(Optional) SET GTRXDEV(Op tional) ADD IPLOGICPOR T(Optional) ADD IPLOGICPOR T(Optional) Indicates the size of the PING packet, neither IP header nor ICMP header is included. PL1 PL16QAM Persistence Level 1 BSC6900 16QAM Transmitter Power Reduce Level BSC6900 PL2 Persistence Level 2 BSC6900 PL3 PL32QAM Persistence Level 3 BSC6900 32QAM Transmitter Power Reduce Level BSC6900 PL4 Persistence Level 4 BSC6900 PL8PSK TRX 8PSK Level BSC6900 Packet lost measure period [100ms] PLPRD BSC6900 PLTH Packet discard threshold[0.001] BSC6900 Sent packet level 1 of the radio Persistence size access priority. During MS access, the access priority of the MS is set. If the priority attenuation level of all the Power of the MS is higher than the other timeslots of the BCCH except for timeslot 7 in 16QAM. The attenuation level ranges from 0 to 50, with the step of of the radio Persistence level 2 0.2 dB. When access priority. During MS access, the access priority of the MS is set. If the priority of the MS is of the radio the Persistence level 3 higher than access priority. During MS access, the access priority of the MS is set. If the priority attenuation level of all the Power of the MS is higher than the other timeslots of the BCCH except for timeslot 7 in 32QAM. The attenuation level ranges from 0 to 50, with the step of of the radio Persistence level 4 0.2 dB. When access priority. During MS access, the access priority of the MS is set. If the priority attenuation level of the the Power of the MS is higher than EDGE TRX. There are 50 power attenuation levels. At each level, the power is attenuated by 0.2 dB. The spectrum requirements are Statistics period of the packet drop ratio. This parameter indicates the period for collecting the statistics information about the packet drop ratio. Note that the unit of this Packet drop ratio threshold for speed reduction. When the packet drop ratio exceeds the value of this parameter, the rate of the logical port is reduced. Note that the unit PLYPOINT Play Point BSC6900 SET TCPLYVOICE (Mandatory) Point at which to play sound PLYSWITCH Play Switch BSC6900 PLYTIME Play Time Performance monitor control threshold Performance monitor control threshold Interval for Sending Cell Paging Package Number of Cell Pagings in One Package BSC6900 PMCTHD BSC6900 PMCTHD BSC6900 PMI BSC6900 PMNUM BSC6900 SET TCPLYVOICE (Mandatory) Whether of sound playing.playing Duration to enable sound If this parameter is set to 0, the sound is SET played repeatedly. If this parameter TCPLYVOICE exceeds the duration of the record (Optional) file, the void threshold played for the CPU usage sound is for performance monitoring. When the SET average CPU usage of sliding FCCPUTHD( windows reaches or exceeds the Optional) threshold, performance monitoring Packet queue usage threshold for performance monitoring. When the SET average packet queue usage of FCMSGQTHD sliding windows reaches or (Optional) exceeds the threshold, Interval for sending cell paging SET group packets when Paging GCELLSOFT( Messages Optimize at Abis Mandatory) Interface is enabled Number of cell paging group SET packets when Paging Messages GCELLSOFT( Optimize at Abis Interface is Mandatory) enabled SET GCELLSOFT( Optional) Whether to enable Paging Messages Optimize at Abis Interface threshold for recovery CPU usage from performance monitoring. SET When the average CPU usage of FCCPUTHD( sliding windows is lower than the Optional) threshold, performance monitoring Packet queue usage threshold for recovery from performance SET monitoring. When the packet FCMSGQTHD queue usage of sliding windows is (Optional) lower than the threshold, SET FCSW(Option Whether to monitor the RRM al) performance SET SCUPORT(O ptional) Number of the port SET ALMPORT(Ma ndatory) Port No. of environment alarm PMOAFLAG Cell Paging Package Switch Performance monitor restore threshold Performance monitor restore threshold Performance monitoring flow control switch BSC6900 PMRTHD BSC6900 PMRTHD BSC6900 PMSW BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No BSC6900 PN Port No BSC6900 PN BM Port No BSC6900 Port No. of the XPU board. If you SET do not specify this parameter, all XPUPORT(Op ports of the XPU board are tional) queried. of the E1/T1 port on the Number Ater interface board. E1 mode: ADD 0~31 (EIU), 0~62(OIU), ATERE1T1(M 0~251(POUc). T1 mode: andatory) 0~31(EIU), 0~83(OIU), ADD AE1T1(Manda tory) BLK AE1T1(Manda Port number It is one key field of identifying the BLK block of the Ater timeslot and ATERE1T1(M indicates the port No. of the Ater andatory) interface timeslot. ADD PBE1T1(Mand Port number of the E1/T1 of the Pb atory) interfaceof the port where the Number alarm is generated, only the ports ADD for data transmission are OBJALMSHL supported, such as E1/T1 port, D(Mandatory) channelized optical port tributary, SET MSPCMD(Ma ndatory) SET Indicates the port number for MSP(Mandato running this command. SET E1T1LOP(Opti onal) E1/T1 port number LOP E1T1(Optional ) SET E1T1(Optional E1/T1 port number STR E1T1TST(Opti onal) E1/T1 port number SET OPTLOP(Man Indicates the port number for datory) running this command. SWP ETHPORT(Ma ndatory) Port number PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 SET OPT(Optional) Port number SET COPTLNK(Op tional) Port number SET ETHPORT(Op tional) ADD ETHREDPOR Ethernet port ADD IPLOGICPOR T(Optional) FE/GE port number STR IPCHK(Option al) STR ETHOAMLOO Ethernet port STR FRPORTLOO P(Optional) Port number CHK E1T1CRS(Ma ndatory) E1/T1 port number ADD BC(Mandatory ) Port number ADD PBSL(Mandat ory) ADD BTSAUTOPL AN(Mandatory ) SET BTSENVALM PORT(Mandat ory) ADD SET BTSFORBIDT S(Mandatory) ADD BTSPPPLNK( PN Port No. BSC6900 PN Port No. BSC6900 PN Physics port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 PN Port No. BSC6900 Port number of Pb signaling link PN Port No. BSC6900 Port No. of the BSC6900 board connected with the BTS PN Port No. BSC6900 Alarm port number PN Port No. BSC6900 Number of the port on the BTS side PN Port No. BSC6900 SET BTSOMLTS( Mandatory) Number of the port on the BTS side PN Port No. BSC6900 ADD Number of the port through which BTSCONNEC the BTS is connected to the T(Mandatory) BSC6900 SET BTSETHPOR T(Mandatory) ADD BTSETHLCM EP(Mandatory ) SET GCELLPSOT HERPARA(Op tional) SET GCELLPSOT HERPARA(Op tional) SET GCELLPSOT HERPARA(Op tional) SET GCELLPSOT HERPARA(Op tional) PN Port No. BSC6900 PN Port No. Transmission Delay of POC Service BSC6900 POCDELAY BSC6900 POCGBRMAX Max. GBR for POC Service BSC6900 POCGBRMIN Min. GBR for POC Service BSC6900 Number of the FE or GE port Number of the Ethernet port. The number must be consistent with that of the port carrying the FE connectiontransmission delay of the Maximum of the IP BTS. POC service (push to talk over cellular). The transmission delay of the POC service must be relatively small. Thebandwidth of the POC Maximum network side must service (push to talk over cellular). The transmission delay of the POC service must be relatively small. The network side must the POCthe Minimum bandwidth of support service (push to talk over cellular). The transmission delay of the POC service must be relatively small. The network side must support the PocSup POC Support Power Output Reduction Threshold BSC6900 PODECTHRES BSC6900 POERRTHRES Power Output Error Threshold BSC6900 POINTDESINFO Rollback Point Description BSC6900 POINTNAME Rollback Point Name BSC6900 Whether to support the push to talk over parameter specifies a This cellular (POC) service condition for generating a BTS SET alarm. When the output power of a GCELLOTHE TRX of a transmitter is lower than a XT(Optional) fixed parameter specifies a This level, an error is generated. condition for generating a BTS SET alarm. When the output power of a GCELLOTHE TRX of a transmitter is lower than a XT(Optional) fixed level, an error is generated. ADD ROLLBACKP OINT(Optional ) description of the rollback point. BEG ROLLBACK(M andatory) BEG FORWARD(M name of the rollback point. Port Destination Port BSC6900 PORT Port BSC6900 ADD FTPSCLTDP This port is provided by the FTP ORT(Mandato server to be visited by the FTP ry) client. of the port where to set up Number the link after the BTS ring is SWP swapped. If this parameter is set to BTSRING(Opt 0, the BTS works on a forward ring. ional) If this parameter is set to 1, the SWP Number of the port where to set up BTSOMLLINK the link after the main and backup (Optional) OMLs of the BTS are swapped ADD DXXCONNEC T(Mandatory) Number of the DXX port PORT Port BSC6900 PORTNO DXX In Port No. BSC6900 PORTNUM DXX Port Number BSC6900 PORTPROTYPE Port protocol type BSC6900 ADD Maximum number of ports on the DXX(Optional) DXX ADD PORTFLOWC TRLPARA(Ma ndatory) Port protocol type SET XPUPORT(M Whether to enable the panel port of andatory) the XPU board Indicates the type of the physical port used by the local maintenance ADD point in the maintenance group. FE ETHMEP(Man indicates the FE port and TRUNK datory) indicates the aggregation group. Type of the port. If this parameter ADD is set to "TOPEXTOUTPORT", the BTSTOPCON local E1/T1 ports are used to FIG(Mandator extend the transmission of other y) boards. That is, the timeslots on SET GCELLCCUT Whether to transmit the 2Quater RANSYS(Opti message on the BCCH Norm onal) channel or the BCCH Ext channel LOD BTSPATCH(M andatory) CON BTSPATCH(M Type of the patch operation Rated maximum output power of SET the diesel engine. Refer to the BTSAPMUBP( rated output power described on Optional) the diesel engine label. PortSwitch Panel Port Switch BSC6900 PORTTYPE Port Type BSC6900 PORTTYPE POS2QUATER Port Type 2Quater Message Transmission Channel BSC6900 BSC6900 POT Patch Operation Type BSC6900 POWER Rated Power BSC6900 POWER_RELAY1 Switch for Relay 1 BSC6900 ADD EMU(Optional ) Relay switch 1 ADD EMU(Optional ) Relay switch 2 ADD EMU(Optional ) Relay switch 3 ADD EMU(Optional ) Relay switch 4 ADD EMU(Optional ) Relay switch 5 ADD EMU(Optional ) Relay switch 6 SET BTSPMUBP( Optional) SET GCELLBASIC PARA(Optiona l) SET GCELLBASIC PARA(Optiona l) SET BTSPMUBP( Optional) POWER_RELAY2 Switch for Relay 2 BSC6900 POWER_RELAY3 Switch for Relay 3 BSC6900 POWER_RELAY4 Switch for Relay 4 BSC6900 POWER_RELAY5 Switch for Relay 5 BSC6900 POWER_RELAY6 Switch for Relay 6 BSC6900 POWERCURRENT DIV Battery Shunt Coefficient 16QAM Transmitter POWERREDUCE16 Power Reduce QAM Level 32QAM Transmitter POWERREDUCE32 Power Reduce QAM Level BSC6900 BSC6900 BSC6900 Batteryattenuation level of timeslot Power current shunt coefficient 7 of the BCCH in 16QAM. The attenuation level ranges from 0 to 50, with the step of 0.2 dB. When the EDGE TRX sends signals in Power attenuation level of timeslot 7 of the BCCH in 32QAM. The attenuation level ranges from 0 to 50, with the step of 0.2 dB. When the EDGE TRX sends signals in POWERTYPE Power Type BSC6900 Power type managed by the PMU POWERTYPE Cabinet Power System Type BSC6900 POWL Power Level BSC6900 SET BTSPOWERT Type of the power supply system of YPE(Optional) the cabinet This parameter specifies the transmit power level of the TRX. SET The greater this parameter is, the GTRXDEV(Op smaller the transmit power is. tional) When this parameter is set to "0", POWT Power Type BSC6900 PPPEAAT PPP Frame Error Alarm Threshold BSC6900 PPP Frame Error Alarm Clearance Threshold BSC6900 PPPEADT This parameter specifies the maximum transmit power SET supported by the power amplifier of GTRXDEV(Op the TRX. The macro BTS and the tional) mini BTS support different power When the number of error frames ADD on the PPP layer reaches the value BTSPPPLNK( of this parameter, the frame error Optional) alarm is generated. When the number of error frames ADD on the PPP layer decreases to the BTSPPPLNK( value of this parameter, the frame Optional) error alarm is cleared. ADD PPPLNK(Opti onal) PPP link number of BSC. ADD MPLNK(Optio nal) PPP link number ADD IPLOGICPOR T(Optional) ADD BTSPPPLNK( Mandatory) ADD BTSMPLNK(M ADD PPPLNK(Opti onal) ADD MPGRP(Optio ADD PORTFLOWC TRLPARA(Opt ional) PPPLNKN PPP link No. BSC6900 PPPLNKN PPP sub-link No. BSC6900 PPPLNKN PPP link No. BSC6900 PPP link number PPPLNKN PPP Link No. BSC6900 PPPMUX PPP mux BSC6900 Priority queue number BSC6900 Preempted Call Not Released PREEMFORHONOT After Handover REL Failure BSC6900 PDCH Preemption Allowed During PREEMFORHOPDC Handover Due to H Preemption BSC6900 PQNUM Emergency Call Preemption Permitted PREEMPTIONPER MIT BSC6900 Number of a BTS PPP PPP frame Whether to enable the link. multiplexing function. If this parameter is set to ENABLE, the PPP frame multiplexing function is enabled. If this parameter is set to This parameter applies to the FG2a and GOUa boards. For the FG2c, GOUc, or POUc board, this parameter is always set to 2. This parameter specifies whether the preempted call is released after SET the handover failure. If this OTHSOFTPA parameter is set to No, MSs with RA(Optional) high priorities can accesswhether This parameter specifies the to preempt PDCHs when no TCH SET is available during the handover of OTHSOFTPA the preempted call. When this RA(Optional) parameter is set to set tothe call If this parameter is Yes, ON, the BSC initiates a TCHF preemption SET when receiving a link establishment GCELLCCAD( indication from an MS in an Optional) emergency call. PREMRSAMPLE Preprocess MR Sample Ratio BSC6900 PRI Route Priority BSC6900 PRIACCTHR Packet Access Priority Support Priority Based Flow Control BSC6900 PRIFCEN BSC6900 PRIMMESPPT Transfer Original MR BSC6900 PRINTCTHD Print control threshold BSC6900 PRINTCTHD Print control threshold BSC6900 PRINTRTHD Print restore threshold BSC6900 PRINTRTHD Print restore threshold BSC6900 SET GMRCTRL(O Sampling rate of pre-processed ptional) measurement reports. Priority of a route. A smaller value of this parameter indicates a higher ADD priority. The BTS preferentially BTSIPRT(Opti selects the route with a high priority onal) to transfer information. that is Access priority of the MS allowed to access the cell. The MS SET sends the packet channel request GCELLPSBA containing the 2-bit radio priority SE(Optional) message. The priority of the 2-bit This parameter specifies whether to support flow control based on SET priority. When this parameter is set BSCFCPARA( to on, the system preferentially Optional) admits the calls initiated by VIP Whether the BTSs send the original measurement reports to SET the BSC after pre-processing them. GCELLHOCT When this parameter is set to YES, RL(Optional) the BTSs sendsthreshold. If the Printing control the original and CPU usage of sliding windows SET reaches or exceeds the threshold, FCCPUTHD( printing flow control is triggered on Optional) the serial port. threshold. When Printing control the packet queue usage of sliding SET windows reaches or exceeds the FCMSGQTHD threshold, printing flow control is (Optional) triggered on thethreshold. If the Printing control serial port. CPU usage of sliding windows is SET lower than the threshold, printing FCCPUTHD( flow control on the serial port is Optional) stopped.control threshold. When Printing the packet queue usage of sliding SET windows is lower than the FCMSGQTHD threshold, printing flow control on (Optional) the serial port is stopped. SET FCSW(Option al) SET GCELLBASIC PARA(Optiona l) PRINTSW Print Flow control switch BSC6900 PRIOR Cell Priority BSC6900 PRIOR Cell Priority BSC6900 Whether to control the printing flow on the serial port This parameter controls handover between cells at the same layer. Generally, the cells at the same layer are set with the same priority. If theparameter controls the have This cells at the same layer handovers among cells on a same ADD layer. A smaller priority value GEXT2GCEL indicates a higher priority. Cells L(Optional) with higher priorities are PRIORABISLOADT HRED Flex Abis Prior Choose Load Thred BSC6900 PRIORCLASS Cell HCS Prior Class BSC6900 PRIORITY Route priority BSC6900 PRIORITY Signalling link priority BSC6900 SET BTSFLEXABI SPARA(Optio nal) SET GCELLSERV PARA(Optiona l) ADD MTP3RT(Opti onal) ADD M3RT(Optiona ADD MTP3LNK(Opt ional) ADD M3LNK(Optio ADD IPRT(Mandato ry) SET BTSOTHPAR A(Mandatory) SET BTSOTHPAR A(Mandatory) SET BTSOTHPAR A(Mandatory) If the static Abis resource load is greater than the value of "Fix Abis Prior Choose Abis Load Thred" and the dynamic Abis resource load is greater than the value of this Priority of the hierarchical cell structure (HCS). 0: indicates the lowest priority; 7: indicates the highest priority. Route priority. The highest priority is represented by 0. PRIORITY Priority BSC6900 Preferential PRIVATEPROBEFS Customized T Detection Type Number of PRIVATEPROBENU Customized M Detection Types Subsidiary PRIVATEPROBESN Customized D Detection Type BSC6900 BSC6900 BSC6900 Priority of the signaling link. 0 indicates the highest priority. Route priority. The boards FG2a, GOUa, UOIa(IP), FG2c, and GOUc support the configuration of routes with different priorities. Suppose two or more routes are configured Preferential customized detection type when the customized sequence is used for port detection. Number of customized detection types involved when the customized sequence is used for port detection. Subsidiary customized detection type when the customized sequence is used for port detection. This parameter is valid only when Number of Customized PrivKey Private Key File Name BTS Port Detection Sequence BSC6900 SET CERTFILE(Op tional) Name of the private key file SET BTSOTHPAR Port detection sequence used A(Optional) during BTS startup. Identifies the DSP protocol type, including ITUT(International ADD Telecommunication Union N7DPC(Optio Telecommunication nal) Standardization Sector), PROBESEQ BSC6900 PROT SS7 protocol type BSC6900 PROT Frame Relay Protocol Type BSC6900 ADD BC(Optional) Protocol type of the trunk frame PROTECTDELAYTI Protection Delay ME for Detection BSC6900 Dyn. Turning Off Cell Protection Time BSC6900 PROTECTTIME SET BTSABISTRO P(Optional) SET GCELLDYNT URNOFF(Opti onal) ProtectTimeTrxPowe TRX Power-on rOn Protection Time BSC6900 PS Port select BSC6900 SET BSCDSTPA(O ptional) SET E1T1(Optional ) CHK E1T1CRS(Ma Port selection The transmission resource in the Abis timeslot is considered as faulty only when the BTS detects that the Abis timeslot is faulty in the delay. The transmission resource This parameter specifies a period of time during which a cell cannot be enabled or disabled to prevent frequent cell enabling or disabling operations. Thatis set to prevent the This parameter is, after a cell is BSC from frequently enabling or disabling the TRX. After a TRX is powered on, the BSC is not allowed to disable the TRX within PS Port select BSC6900 SET OPT(Optional) Port selection SET COPTLNK(Ma ndatory) Port selection ADD TRMFACTOR GSM PS data service downlink (Optional) factor ADD TRMFACTOR (Optional) GSM PS data service uplink factor Whether to support PS Handover(PS HO). The PS HO is ADD used to reduce the interval of the NSE(Optional) cell reselection of the MS. ADD TRMMAP(Opti onal) PS high PRI data path ADD TRMMAP(Opti onal) PS high PRI data priority ADD GCELL(Option Priority of the PS high priority al) service PS Port select BSC6900 PSDATADL GSM PS data service downlink factor BSC6900 GSM PS data service uplink factor PSDATAUL BSC6900 PSHOSUP PS Handover Support BSC6900 PS high PRI data PSHPRIDATAPATH path BSC6900 PSHPRIDATAPRI PS high PRI data priority BSC6900 PSHPSP PS High PRI Service PRI BSC6900 PSI1RPT PSI1 Repetition Period BSC6900 PSISTATUSIND Support PSI Status Message BSC6900 Period for sending the packet message PSI. If the period is too SET long, the message PSI cannot be GCELLPSI1(O obtained in realtime. If the period is ptional) too short, the message PSI is Whether the BSC supports the SET state message PSI. The state GCELLPSI1(O message PSI refers to PSI ptional) STATUS. ADD TRMMAP(Opti onal) PS low PRI data path ADD TRMMAP(Opti onal) PS low PRI data priority ADD GCELL(Option Priority of the PS low priority al) service Threshold of the receive level for SET triggering the handover of the PS GCELLHOIUO services from the overlaid subcell (Optional) to the underlaid subcell SET GCELLCCAC Minimum access level of the CESS(Optiona random access channel (RACH) in l) the PS domain ADD Minimum voltage level for BTSLOCGRP( accessing PS services of the Optional) location group SET Maximum number of messages in BSCFCPARA( the statistical period for the arrival Optional) of PS resource requests SET BSCFCPARA( Optional) SET BTSAPMUBP( Optional) SET BTSDPMUBP( SET BTSAPMUBP( Optional) SET BTSDPMUBP( PS low PRI data PSLPRIDATAPATH path BSC6900 PSLPRIDATAPRI PS low PRI data priority BSC6900 PSLPSVP PS Low PRI Service PRI BSC6900 PS OtoU HO PSOTOURECEIVET Receive Level HRSH Threshold BSC6900 PSRACHACCLEV PS RACH Min. Access Level BSC6900 PSRACJACCLEV PS Min.Access Level BSC6900 Max PS PSRESREQMSGNU Resource REQ MINPERIOD Num in Period PS Resource REQ Statistical Period BSC6900 PSRESREQSTATP ERIOD BSC6900 PSU0 DPSU 0 Configured BSC6900 PSU1 DPSU 1 Configured BSC6900 Statistical period for the arrival of PS resource requests DPSU0 to Whether to enable the supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be theenable as the value to Whether to same the DPSU1 of supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be the same as the value of PSU2 DPSU 2 Configured BSC6900 SET BTSAPMUBP( Optional) SET BTSDPMUBP( Optional) SET BTSDPMUBP( Optional) SET BTSDPMUBP( Optional) SET BTSDPMUBP( Optional) SET BTSDPMUBP( Optional) SET BTSDPMUBP( Optional) SET GCELLHOIUO (Optional) SET BTSOTHPAR A(Optional) PSU2 DPSU 2 Configured BSC6900 PSU3 DPSU 3 Configured BSC6900 PSU4 DPSU 4 Configured BSC6900 PSU5 DPSU 5 Configured BSC6900 PSU6 DPSU 6 Configured BSC6900 PSU7 DPSU 7 Configured BSC6900 PS UtoO HO PSUTOORECEIVET Receive Level HRSH Threshold BSC6900 PSUTURNINGOFFE PSU Turning Off NABLE Enable BSC6900 Self-healing Switch for OMU Process Whether to enable the DPSU2 to supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be theenable as the value to Whether to same the DPSU2 of supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be theenable as the value to Whether to same the DPSU3 of supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be theenable as the value to Whether to same the DPSU4 of supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be theenable as the value to Whether to same the DPSU5 of supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be theenable as the value to Whether to same the DPSU6 of supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be theenable as the value to Whether to same the DPSU7 of supply power for the BTS. In multi-mode scenario, the value of this parameter in one mode must be the same as the value of Threshold of the receive level for triggering the handover of the PS services from the underlaid subcell to the overlaid subcell This parameter specifies whether the BTS is allowed to enable the PSU Smart Control feature. When this parameter is set to YES, the BTS automatically enables or PSW BSC6900 SET SLFSLVSW(O Switch for the self-healing of the ptional) OMU processes SET ALMPORT(Ma ndatory) Port type of environment alarm ADD Number of the port that provides SNTPSRVINF the time information on the SNTP O(Mandatory) server PT Port Type BSC6900 PT Port BSC6900 PT Cell Reselect Penalty Time BSC6900 Cell Reselect Penalty Time (PT) is used to ensure the safety and SET validity of cell reselection because GCELLIDLEA it helps to avoid frequent cell D(Optional) reselection. For details, see GSM ADD NSE(Mandato ry) Subnet protocol type SET BTSENVALM PORT(Option al) Alarm port type SET E1T1(Optional ) Line coding method SET E1T1(Optional ) Receiving frame structure SET E1T1(Optional ) Sending frame structure SET E1T1(Optional ) Frame structure ADD BTSABISHDL CPATH(Mand atory) Number of a BTS HDLC path. It is ADD unique in one [BTS]. SET ETHPORT(Ma ndatory) Ethernet port type When the Power system type. PMU is installed on the rack, you SET can select the custom power BTSAPMUBP( system type. Optional) In multi-mode scenario, the value SET CERTFILE(Op tional) SET BTSAUTODL DACTINFO(O ptional) PT Subnet Protocol Type BSC6900 PT Port Type BSC6900 PTCODE Line code BSC6900 PTRXT Frame receive Structure BSC6900 PTTXT Frame send Structure BSC6900 PTTYPE Frame Structure BSC6900 PTUID HDLC Path Index In BTS BSC6900 PTYPE Port type BSC6900 PTYPE Power System Type BSC6900 PubCert Certificate File Name BSC6900 PV BTS Patch Version BSC6900 Name of the certificate file patch This parameter specifies the version loaded to the BTS. This parameter can be set to only a hot patch version. You can use either of the following methods to PV Patch Version BSC6900 PVC Utilization PVCUSERATETIME Report Period R Timer BSC6900 LOD BTSPATCH(M andatory) CON BTSPATCH(M SET BSCPSSOFT PARA(Optiona l) SET CERTFILE(Ma ndatory) ADD OP(Mandatory ) DLD LICENSE(Man DLD RETANTCFG( Mandatory) ULD BTSDEVFILE( Number of the patch utilization Period timer of PVC version report. This timer is started during initialization. When the timer expires, the PVC utilization information is reported. PWD Private Key Password BSC6900 Private key password PWD Password BSC6900 PWD User Password BSC6900 Password User password for the FTP server. When the FTPServer.exe file downloaded through the LMT is installed, the user password is admin. PwdMinLen Minimum Password Length BSC6900 SET PWDPOLICY( Minimum length of the user Optional) password STR BTSTST(Man datory) Power level SET PWRALMSW( First alarm switch of power Optional) distribution monitoring board SET PWRALMSW( Optional) SET GCELLPWRB ASIC(Optional ) SET GCELLPWR3( Optional) SET GCELLPWRB ASIC(Optional ) PWL Power Level BSC6900 PWRALMSSW1 First Alarm Switch BSC6900 PWRALMSSW2 Second Alarm Switch BSC6900 PWRBCDALLOWD Power Forecast Allowed BSC6900 Second alarm switch of power distribution monitoring board Whether to allow active power control. If this parameter is set to YES, the system performs power forecast in the process of initial access assignment or service PWRCTRLOPTIMIZ III Power Control EDEN Optimized Enable BSC6900 Whether to enable the optimized power control algorithm III Whether to enable power control algorithm II or power control algorithm III PWRCTRLSW Power Control Switch BSC6900 PWRDIV Power Deviation BSC6900 PWRDIVIND Power Deviation Indication BSC6900 PWRLOCATION Location Group Power Switch BSC6900 PWRMODE Power Class BSC6900 PWROFFPROTECT Power-off Protect STARTTIME Start Time BSC6900 Power Priority PWRPRIORALLOW Allowed BSC6900 PWRSPNR Power Finetune BSC6900 PwrSwitchA ANT_A ALD Power Switch BSC6900 PwrSwitchB ANT_B ALD Power Switch BSC6900 PwrSwitchRET RET ALD Power Switch BSC6900 Q0MINDSCP Min DSCP of queue 0 BSC6900 Q1MINDSCP Min DSCP of queue 1 BSC6900 If a class 3 MS on the DCS1800 band does not receive the original power command after random access, the power that the MS usesMSthe MS maximum the The is does not receive transmit original power command after random access. This parameter indicates whether the power deviation to enable to the class 3 Whether is added the power amplifier for all location groups. SET 0x01 indicates that the TRX power GCELLSOFT( amplifier is enabled for all location Optional) groups. 0x00 indicates that the ADD BTSBRDCAP( Mandatory) ADD BTSRXUBRD( Power mode. between the time Time interval when the BTS detects that the SET external power supply is shut down BTSBAKPWR and the time when the backup (Optional) power decreasespecifies is started. This parameter function whether to enable the TRX with good powerSET saving performance. When this GCELLCHMG parameter is set to YES, the TRX AD(Optional) with goodof the TRX power. During Finetune power-saving the static finetune of the TRX SET power, the BSC adjusts the TRX GTRXDEV(Op power at a step of 0.2 dB. In some tional) scenarios, the losses vary When the ANT_A tributary antenna SET power switch is ON, it is allowed to BTSRXUBP(O configure related parameters of the ptional) ANT_A tributary. When the ANT_B tributary antenna SET power switch is ON, it is allowed to BTSRXUBP(O configure related parameters of the ptional) ANT_B tributary. When the RET tributary antenna SET power switch is ON, it is allowed to BTSRXUBP(O configure related parameters of the ptional) RET tributary. Minimum DSCP of queue 0. The IP SET packets with DSCP in a relation QUEUEMAP( that "Min DSCP of queue 0" <= Optional) DSCP <= DSCP of queue 1. The IP Minimum 63 is added to queue 0. packets with DSCP in a relation SET that "Min DSCP of queue 1" <= QUEUEMAP( DSCP < "Min DSCP of queue 0" is Optional) added to queue 1. SET GCELLCCAC CESS(Optiona l) SET GCELLCCAC CESS(Optiona l) Q2MINDSCP Min DSCP of queue 2 BSC6900 SET QUEUEMAP( Optional) SET QUEUEMAP( Optional) SET QUEUEMAP( Optional) SET GCELLCCUT RANSYS(Opti onal) SET GCELLHOBA SIC(Optional) SET GCELLHOAD( Optional) SET GCELLHOAD( Optional) SET GCELLHOAD( Optional) SET GCELLCCUT RANSYS(Opti onal) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLPSOT HERPARA(Op tional) Q3MINDSCP Min DSCP of queue 3 BSC6900 Q4MINDSCP Min DSCP of queue 4 BSC6900 QCI Qsearch C Initial BSC6900 QCKMVHOEN MS Fast Moving HO Allowed BSC6900 QCKSTATCNT MS Fast-moving Watch Cells BSC6900 QCKTIMETH MS Fast-moving Time Threshold BSC6900 QCKTRUECNT MS Fast-moving Valid Cells BSC6900 QI Qsearch I BSC6900 QLENSD Filter Length for TCH Qual. BSC6900 QLENSI Filter Length for SDCCH Qual. BSC6900 QOSOPT Support QoS Optimize BSC6900 Minimum DSCP of queue 2. The IP packets with DSCP in a relation that "Min DSCP of queue 2" <= DSCP < "Min DSCP of queue 1" is added to queue 2. queue 3. The IP Minimum DSCP of packets with DSCP in a relation that "Min DSCP of queue 3" <= DSCP < "Min DSCP of queue 2" is added to queue 3. queue 4. The IP Minimum DSCP of packets with DSCP in a relation that "Min DSCP of queue 4" <= DSCP < "Min DSCP of queue 3" is added to queue 4. The IP packets This parameter specifies the threshold of the signal level for cell reselection in connection mode before ""Qsearch C"" isfast moving Whether to enable the obtained. micro-cell handover algorithm. The fast moving micro-cell handover algorithm enables fast moving MSs to switch over tois used in the thus This parameter macro-cells, P/N criteria decision: If an MS quickly passes through N out of P microcells lately, the BSC enables the fast moving micro-cell handover A time threshold determined based on the radius of a cell and the moving speed of an MS. If the MS crosses the cell in a time period shorter than thisis used in the P/N This parameter threshold, the criteria decision: If an MS quickly passes through N out of P microcells lately, the BSC enables the fast moving micro-cell handover This parameter specifies the level threshold for cell reselection in idle mode. In idle mode, if the signal level of the serving cell is below [0, 7] or For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutivesupport QoC reports. Whether to measurement optimization. The GSN equipment for the GPRS provides flexible QoS mechanisms for different subscribers. The QoS level is also QP Qsearch P BSC6900 QSEARCHC Qsearch C BSC6900 QTRU Signal QTRUCHANMANGS Merge Avoid WITCH Switch BSC6900 Qtru Down Power QTRUDNPWRLAST Inadequate Last TIME Time BSC6900 Qtru Down Power QTRUDNPWRSTAT Inadequate Stat TIME Time BSC6900 Multi-Density TRX Power Sharing This parameter specifies one threshold of the signal level for cell reselection in packet transfer mode. In packet transfer mode, if signal connection mode, if the the level is below [0-7] or above [8-15], the MS starts to search for 3G cells. For example, if this parameter is setis used to if the This parameter to 5 and avoid allocating the calls whose signal SET strengths differ greatly to the same GCELLSOFT( timeslot. Optional) The BSCcriteria is used to P/N measures the signal determine low downlink power for SET multi-density carriers. If the GCELLCHMG downlink power of a multi-density AD(Optional) carrier remains low during a The P/N criteria is used to determine low downlink power for SET multi-density carriers. If the GCELLCHMG downlink power of a multi-density AD(Optional) carrier remains low during a SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) SET Whether to use the statistical GCELLCHMG multiplexing algorithm for multiAD(Optional) density power Maximum number of times that the BTS finds that the air conditioner SET needs to be switched off. If the BTSAIRCON( number of times that the BTS finds Optional) that the airnumber of times that the Maximum conditioner needs to be BTS finds that the air conditioner SET needs to be switched on. If the BTSAIRCON( number of times that the BTS finds Optional) that the air conditioner needs to be SET Step of downward power GCELLPWR2( adjustment according to the quality Optional) of the received signals SET Whether to query the classmark of GCELLSOFT( the call in an incoming BSC Optional) handover SET GCELLHOBA Whether to allow the fast handover SIC(Optional) algorithmdevices of rack 0. This Auxiliary parameter contains eight bits. SET The eight bits, from the most BTSAUXEQP( significant bit to the least significant Optional) bit, indicate whether to install a QTRUPWRSHARE BSC6900 QUALOFFTIMES Qualified Times for Off BSC6900 QUALONTIMES Qualified Times for On MAX Down Adj. PC Value by Qual. BSC6900 QUALSTEP BSC6900 Query Classmark QUERYCMAFTERIN after In-BSC HO BSCHO Enabled BSC6900 QUICKHOEN Quick Handover Enable SubRack0 Auxiliary Equipment BSC6900 R0AuxDev BSC6900 R0BatAllow SubRack0 Storage Battery Config Permit SubRack0 Storage Battery Capacity SubRack0 Storage Battery Coefficient SubRack0 Storage Battery Type SubRack1 Auxiliary Equipment SubRack1 Storage Battery Config Permit SubRack1 Storage Battery Capacity SubRack1 Storage Battery Coefficient SubRack1 Storage Battery Type SubRack2 Auxiliary Equipment SubRack2 Storage Battery Config Permit SubRack2 Storage Battery Capacity BSC6900 SET BTSBAT(Opti Whether to configure a battery rack onal) for rack 0 SET BTSBAT(Man Capacity of the battery rack datory) configured for rack 0 charging Ratio of the maximum current of the battery pack SET configured for rack 0 to the BTSBAT(Man capacity of the battery pack. For datory) example, assume that the battery SET BTSBAT(Man Type of the battery rack configured datory) for rack 0devices of rack 1. This Auxiliary parameter contains eight bits. SET The eight bits, from the most BTSAUXEQP( significant bit to the least significant Optional) bit, indicate whether to install a SET BTSBAT(Opti Whether to configure a battery rack onal) for rack 1 SET BTSBAT(Man Capacity of the battery rack datory) configured for rack 1 charging Ratio of the maximum current of the battery pack SET configured for rack 1 to the BTSBAT(Man capacity of the battery pack. For datory) example, assume that the battery SET BTSBAT(Man Type of the battery rack configured datory) for rack 1devices of rack 2. This Auxiliary parameter contains eight bits. SET The eight bits, from the most BTSAUXEQP( significant bit to the least significant Optional) bit, indicate whether to install a SET BTSBAT(Opti Whether to configure a battery rack onal) for rack 2 SET BTSBAT(Man Capacity of the battery rack datory) configured for rack 2 R0BatCap BSC6900 R0BatCoeff BSC6900 R0BatType BSC6900 R1AuxDev BSC6900 R1BatAllow BSC6900 R1BatCap BSC6900 R1BatCoeff BSC6900 R1BatType BSC6900 R2AuxDev BSC6900 R2BatAllow BSC6900 R2BatCap BSC6900 R2BatCoeff SubRack2 Storage Battery Coefficient SubRack2 Storage Battery Type BSC6900 Ratio of the maximum charging current of the battery pack SET configured for rack 2 to the BTSBAT(Man capacity of the battery pack. For datory) example, assume that the battery SET BTSBAT(Man Type of the battery rack configured datory) for rack 2 The NS performs location management based on routing ADD areas during GPRS packet GEXT2GCEL services. Each routing area has a L(Optional) routing area identifier, which is The NS performs location management based on routing ADD areas during GPRS packet GEXT3GCEL services. Each routing area has a L(Optional) routing area identifier. SET GCELLGPRS( Optional) SET BTSAUTOPL ANCFG(Optio nal) ADD GCELLQUICK SETUP(Optio nal) SET BTSAUTOPL ANCFG(Optio nal) SET GCELLCCAC CESS(Optiona l) R2BatType BSC6900 RA RAC BSC6900 RA Route Area BSC6900 RA Routing Area BSC6900 Identifies the routing area of the current cell RA Route Area BSC6900 Route area of the current cell RA Route Area BSC6900 Route area of the current cell RA1 Route Area BSC6900 Route area of the current cell RACHACCLEV CS RACH Min. Access Level BSC6900 RACH Busy RACHBUSYTHRED Threshold Average RACH RACHLDAVERSLO Load Timeslot T Number BSC6900 BSC6900 Minimum access level of the random access channel (RACH) in the CS domain of the MS random Level threshold access for the BTS to determine SET the RACH busy state. When the GCELLCCBA receive level of the random access SIC(Optional) burst timeslot is greater timeslots in Number of RACH burst than this a RACH load measurement. SET The value of this parameter GCELLCCCH( indicates the interval during which Optional) the BSC6900 determines whether ADD Minimum voltage level for BTSLOCGRP( accessing CS services of the Optional) location group RACJACCLEV CS Min.Access Level BSC6900 RACOLOR Routing Area Color Code BSC6900 Allow MS to RANDACCESSRET Access to RY Another Cell BSC6900 RANERRTHRED Random Access Error Threshold BSC6900 Accessorial Hysteresis of Cell RARESELECTHYST Selection BSC6900 SET GCELLPSBA SE(Optional) SET GCELLRESEL ECTPARA(Op tional) SET GCELLCCAC CESS(Optiona l) SET GCELLRESEL ECTPARA(Op tional) Routing area color code of the GPRS cell Whether to allow the MS to access another cellthreshold of the training Correlation sequence for the random access. As defined in the GSM recommendation, the system can determine whether the received Hysteresis of cell selection in different routing area. When a standby or ready MS starts cell reselection, if the original cell and the target cell are in the different RATE Rate BSC6900 RATECTRLSW AMR Rate Control Switch BSC6900 RATSCCHENABLE D Is Ratscch Function Enabled BSC6900 RAWMRSAMPLE Raw MR Sample Ratio BSC6900 RBPTYPE Type of Rollback Point BSC6900 RCDT Result Recording Type BSC6900 RCN Chain No. BSC6900 SET BTSETHPOR T(Optional) Port rate of the IP interface board Switch for controlling the AMR rate. Value 0 indicates that C/I is used to SET control the AMR rate. Value 1 GCELLCCAM indicates that BER is used to R(Optional) control the AMR rate. This parameter specifies whether SET the RATSCCH function is enabled GCELLCCAM during the call establishment R(Optional) procedure. Original measurement report SET sampling rate (for each call, one GMRCTRL(O out of four measurement reports is ptional) collected) indicates the last LASTRBP rollback point. The system BEG automatically takes the position FORWARD(M where the current configuration andatory) command is executedexecution Type of recording the as the result RUN 1. REC_ALL: indicating that the BATCHFILE( execution results of all the Optional) commands the RXU chain ormatter ADD Number of are recorded no ring. BTSRXUCHAI The value scope is 0~11 for NonN(Mandatory) SingleRAN BTS and 0~249 for SET SingleRAN BTS. The RXU chain BTSBREAKP No. is unique in the same BTS. A CBN The first RXU chain number when BTSRXUCHAI combining two RXU chains to be N(Mandatory) one RXU ring. RCN1 First RXU Chain No. BSC6900 RCN2 Second RXU Chain No. BSC6900 RCVMD Receive Mode BSC6900 RDC Rate down coefficient [%] BSC6900 CBN The second RXU chain number BTSRXUCHAI when combining two RXU chains to N(Mandatory) be one RXU ring. of the TRX. RF receive mode The BTS3012, BTS3012AE, SET BTS3012II, BTS3006C, and GTRXDEV(Op BTS3002E do not support Main tional) Diversity. Speed reduction efficient of the logical port. When detecting link ADD congestion through IPPM, the IPLOGICPOR system reduces the bandwidth rate T(Optional) of the logical port by using the SET GCELLCCBA Whether to allow the reassignment SIC(Optional) function to re-assign the radio Whether channels on a different band or on SET the same band. This can help GCELLCCAD( minimize the decrease in service Optional) quality due to interference, faulty SET IUO cell receive quality threshold GCELLHOIUO (AMRFR), which is used for IUO (Optional) handover decision SET GCELLHOIUO (Optional) IUO cell receive quality threshold (AMRHR), which is used for IUO handover decision One of the parameters that decide the underlay and overlay areas. SET The underlay and overlay areas are GCELLHOIUO determined by "RX_QUAL (Optional) Threshold",parameters that decide One of the "RX_LEV Threshold", the underlay and overlay areas. SET The underlay and overlay areas are GCELLHOIUO determined by "RX_QUAL (Optional) Threshold", "RX_LEV Threshold", SET Whether to use the downlink GCELLHOIUO receive level as a condition in IUO (Optional) handover decision enabled, the With traffic control BSC discards some paging SET messages. This parameter OTHSOFTPA specifies whether to record detailed RA(Optional) information of paging messages ADD IPLOGICPOR Speed reduction alarm recovery T(Optional) threshold REASSEN Allow Reassign BSC6900 Frequency Band REASSFREQBAND of Reassign BSC6900 RECEIVEQUALTHR ReceiveQualThrs SHAMRFR hAMRFR BSC6900 RECEIVEQUALTHR ReceiveQualThrs SHAMRHR hAMRHR BSC6900 RECLEVHYST RX_LEV Hysteresis BSC6900 RECLEVTHRES RX_LEV Threshold BSC6900 RECLEVUOHOALL OW RX_LEV for UO HO Allowed BSC6900 Record RecordDiscardedPa Discarded Paging gingInfoFlag Msg BSC6900 Decrease rate alarm recover threshold RECOVERTHD BSC6900 RECQUALTH RX_QUAL Threshold BSC6900 One of the parameters that decide the underlay and overlay areas. SET If "Enhanced Concentric Allowed" GCELLHOIUO is set to OFF, the underlay and (Optional) overlay areas are determined by SET Whether to use the downlink GCELLHOIUO receive quality as a condition in (Optional) IUO handover decision ADD BRD(Mandato ry) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) RECQUALUOHOAL RX_QUAL for LOW UO HO Allowed BSC6900 RED ReduceTransBwInt ReduceTransBwNu m Backup to BSC6900 Interval Reduce Transmission Bandwidth when Congested BSC6900 Number of Transmission Bandwidth to Reduce when Congested BSC6900 Whether to back up the data of the board Interval for releasing the secondary links in the congestion state Secondary link bandwidth that is released each time in the congestion state REF2MCLK2SRC Port for LINE2 BSC6900 Port for output LINE2(The actual SET value range may differ on the LMT CLK(Optional) ) Back-up port for output LINE2(The SET actual value range may differ on CLK(Optional) the LMT ) Port for output LINE1(The actual SET value range may differ on the LMT CLK(Optional) ) Back-up port for output LINE(The SET actual value range may differ on CLK(Optional) the LMT ) REF2MCLK2SRCBA Back-up port for K LINE2 BSC6900 REF2MCLKSRC Port for LINE1 BSC6900 Back-up port for REF2MCLKSRCBAK LINE1 BSC6900 REF2MCLKSW1 Switch of panel 2M BITS1 BSC6900 SET CLK(Optional) Switch of panel BITS1(2M) REF2MCLKSW2 Switch of panel 2M BITS2 BSC6900 Use SGSN clock REFUSELOCALCLK source BSC6900 SET CLK(Optional) Switch of to use BITS2(2M) Whether panel SGSN clock source.Only the Gb interface board needs to set this parameter. If the SET SGSN clock and the MSC clock CLK(Optional) have different clock sources, the REGION Region Information BSC6900 REHOSTABSTIME ReHost Absolute Time BSC6900 REHOSTDELAYTIM ReHostDelayTim E e BSC6900 REHOSTTYPE ReHost Type Reinitialize Neighbour Cell Table BSC6900 Region information of the IP BTS configured with local switching. SET Local switching can be performed BTSLSW(Opti between only the BTSs that have onal) the same region information. SET GREDGRPPR IMHOSTPOLI CY(Mandatory ) Absolute time of re-homing SET GREDGRPPR IMHOSTPOLI CY(Mandatory ) Delay time of re-homing SET GREDGRPPR IMHOSTPOLI CY(Mandatory ) Policy type of re-homing ADD Whether to re-initialize the AISSCFG(Ma neighboring cell pair for software ndatory) synchronization Cabinet number of the associated SET module. The associated two BTSRXUBP(M MRFUs or GRFUs must be in the andatory) same cell. enable the Whether to configuration of the "Extend SET Connection" attribute. The "Extend BTSDFCUBP( Connection" attribute describes the Optional) cascading relationship of the SET BTSRXUBP(O Function to be performed by two ptional) associated modules SET BTSRXUBP(M Slot number of the associated andatory) module SET BTSRXUBP(M Subrack number of the associated andatory) module Number of the DFCB that Tributary is cascaded to the DFCU. The SET "Extend Connection" attribute BTSDFCUBP( describes the cascading Optional) relationship of the DFCB, which ADD TRMMAP(Opti onal) ADD TRMFACTOR Remark REINITTBL BSC6900 Associated Board CN BSC6900 Extend Connection RELATEDFCUENAB Configuration LED Enabled BSC6900 RELATEDCN RELATEDMODFUN Associated Board C Function BSC6900 RELATEDSN Associated Board SN BSC6900 RELATEDSRN Associated Board SRN BSC6900 RELATEDTRACK Cascading Tributary BSC6900 REMARK Remark BSC6900 REMARK Route use description BSC6900 ADD IPRT(Mandato Purpose description of the route ry) record ADD NSVLREMOT Remote NSVL ID of the Gb IP E(Mandatory) route parameter that indicates how A key many times the BSC6900 ADD broadcasts cell messages. You can GSMSCB(Ma obtain the cell broadcast times by ndatory) running the "DSP GSMSCB" SET Whether to enable the Repeated GCELLCCBA Downlink FACCH function for the SIC(Optional) cell cell supports the Repeated If the Downlink FACCH function and the SET measured downlink quality is lower GCELLCCBA than the downlink quality threshold, SIC(Optional) the BTS enables the repeated SET GCELLCCBA SIC(Optional) SET BTSENVALM PORT(Option al) REMOTENSVLI Remote NSVL ID BSC6900 REP Repeat BSC6900 REPEATDLFASET Repeated Downlink FACCH BSC6900 Repeated REPEATDLFATHRE Downlink FACCH D Threshold BSC6900 REPEATSASET Repeated SACCH BSC6900 Whether to enable the Repeated SACCH function for the cell RESALMID Reserved Alarm ID. BSC6900 ResCheckAllowed ResCheckAllowe d BSC6900 RESELHYST Cell Reselection Hysteresis BSC6900 Whether to reserve the binding of the alarmto perform resource Whether ID and the alarm port checks on the resource usage SET system and resource management OTHSOFTPA system. Resource checks can RA(Optional) prevent resource hanging in case Indicating that during cell reselection, the level of the target SET cell should meet the following GCELLNC2P condition: Level of target cell > ARA(Optional) [MAX (level of serving cell, "Cell SET GCELLNC2P NC2 cell reselection interval in the ARA(Optional) same cell of received Packet The number Measurement Report messages on SET the receive level of the serving cell GCELLNC2P is measured continuously. When ARA(Optional) the statistical value is greater than If the number of times when the receive level of the serving cell SET within "Normal Cell Reselection GCELLNC2P Watch Period" is lower than "Cell ARA(Optional) Reselection Level Threshold" is RESELINTERVAL Cell Reselect Interval BSC6900 Normal Cell RESELWATCHPERI Reselection OD Watch Period Normal Cell Reselection RESELWORSENLE Worsen Level VTHRSH Threshold BSC6900 BSC6900 Number of ReservedDynPdchPr Reserved eTranNum Dynamic Channel BSC6900 Reserved TCH Number for PA Turning On ReservedIdleCh BSC6900 This parameter specifies the number of the reserved PDCHs SET that are not used for channel GCELLPSCH converstion in the dynamic M(Optional) transferable channel pool. This parameter specifies the number of idle channels that SET should be reserved on a cell after GCELLOTHE the TRX is shut down. When the XT(Optional) number of idle channels on a cell is SET OTHSOFTPA RA(Optional) Whether to withhold link breakdown alarms in case of BTS resets due to data configurations If OML links break down after BTS resets caused by data SET configurations and recover within OTHSOFTPA the period specified by this RA(Optional) parameter, configuration reset SET PWDPOLICY( Interval for resetting the counter Optional) when the user fails to log in SET BSCNSPARA( Retry times after the peer response Optional) timer expires during NSVC reset SET BTSOTHPAR The waiting time from BTS detect A(Optional) OML disconnect to BTS reset. SET BSCNSPARA( Duration of the peer response timer Optional) during NSVC reset TST SNDRSI(Man Reason for activating the radio datory) status procedure RQD messages Whether the HO sent by the BSC to an MSC carry SET response request cells. Response OTHSOFTPA request cells are optional. They are RA(Optional) used to inform the MSC whether it DLD LICENSE(Opti onal) ULD Whether to resume broken LICENSE(Opti download ADD PPPLNK(Opti Duration of the PPP/MP link restart onal) timer ResetAlmDelaySwitc BTS Reset Alarm h Delay Switch BSC6900 BTS Reset Alarm ResetAlmDelayTime Delay Time BSC6900 Reset Interval of Account Lock Counter RESETINTERVAL BSC6900 RESETRETRY Reset Retry BSC6900 RESETTIME BTS Reset Time BSC6900 RESETTIMER Reset Timer BSC6900 RESID Reason BSC6900 RespReqSel Response on OutBSC HO Req BSC6900 REST Resume Broken Downloads Flag Sub-protocol negotiate out time[S] BSC6900 RESTARTTMR BSC6900 RESTARTTMR Sub-protocol negotiate out time[S] BSC6900 RESTYPE Alarm Restore Type BSC6900 RESUMETIMER Resume Timer BSC6900 REVCHANNUM Reserved Channel Number BSC6900 RFMAXPWRDEC Max RC Power Reduction BSC6900 RFRESINDPRD Radio Resource Report Period BSC6900 RFT Execute Interval BSC6900 RFUCFGBYSLOT Configure RFU by Slot BSC6900 RGPSINDICATION GPS or RGPS BSC6900 RIMSUP RIM Support BSC6900 ADD MPLNK(Optio Duration of the PPP/MP link restart nal) timer EXP ALMLOG(Opti onal) STA ALMLOG(Opti Restoration type of the alarm Time for the BSC to initiate the ADD common measurement or GNRNC(Optio information exchange procedure nal) after this procedure failsthe BSC When assign channels, SET ensures that the sum of the GCELLCHMG number of channels occupied by BASIC(Option high-priority users and the number al) of idle channels reserved for highMaximum number of levels that the BTS RF power decreases. This SET parameter is used to control the GCELLOTHE decrease in the BTS RF power. If XT(Optional) the value issending the radio Interval for too large, the BTS resource indication messages. The SET TRX reports the interference level GCELLCCCH( for each of the channels that have Optional) been idle for the whole Interval for executing the scheduled subtask ADD The unit is determined according SUBTSK(Opti to the time mode. onal) 1. If the time mode is set to 1. This parameter specifies whether to configure the DRFU, MRFU, GRFU, or XRFU by slot or ADD link. BTS(Optional) 2. When card protocol that is Satellite setting the BTS to support enabled to communicate with the SET satellite card connecting to the BTSDGPSBP( DGPS. If "RGPS" is specified, it Optional) indicates to support ran information Whether that the RGPS satellite management (RIM). IN the RIM procedure, RANs(Radio Access ADD Network) can exchange messages NSE(Optional) through the core network. SET The loopback channel number E1T1LOP(Opti when the port loopback mode is set onal) to TDM remote loopback call when Time for disconnecting a the MS fails to decode the SACCH. SET Once a dedicated channel is GCELLCCBA assigned to the MS, the counter S SIC(Optional) is enabled and the initial value is RLCN Channel No. BSC6900 RLT Radio Link Timeout BSC6900 Remote TC Subrack Ater RMTTCATERTRAN Transmission SMODE Mode BSC6900 RNCID RNC ID BSC6900 RNCINDEX Neighboring RNC Index BSC6900 RNCINDEX Neighboring RNC Index BSC6900 SET BSCBASIC(O Transmission mode on the Ater ptional) interface of the remote TC subrack RNC ID of a 3G external cell. The ADD value of this parameter must be GEXT3GCEL consistent with the data L(Mandatory) configuration at the RNC. Internal index of a neighboring RNC. This parameter is set to 255 ADD when the neighboring RNC that GEXT3GCEL serves the 3G external neighboring L(Optional) is not configured. You can use the ADD GNRNC(Mand atory) ADD Internal index of a neighboring GIURGCONN RNC ADD Name of a neighboring RNC. The GNRNC(Mand name is used to uniquely identify a atory) neighboring RNC. SET CERTFILE(Op tional) Name of the root certificate file ADD SGSNROUTE INFO(Mandat ory) Identifies a router uniquely ADD SGSNROUTE INFO(Mandat ory) Router port number SET GCELLSOFT( Optional) SET GCELLNWCT RLMSRPARA( Optional) SET GCELLNWCT RLMSRPARA( Optional) Whether to allow the BTS to report the downlink voice quality index (VQI) RNCNAME Neighboring RNC Name BSC6900 RootCert Root Certificate File Name BSC6900 ROUTENO Route No. BSC6900 ROUTEPORTNO Route Port No. BSC6900 RPTDLVQIALLOWE Report Downlink D VQI Allowed BSC6900 Cell Reselection MR Period in Packet Idle Mode BSC6900 Cell Reselection MR Period in Packet Transfer Mode BSC6900 Decrease rate alarm report threshold RPTPERIODI Cell reselection measurement report period in packet idle mode Cell reselection measurement report period in packet transmission mode RPTPERIODT RPTTHD BSC6900 ADD IPLOGICPOR Speed reduction alarm report T(Optional) threshold RPTVOICE Report Speech Quality Filter Length for SDCCH REP_QUANT Filter Length for TCH REP_QUANT BSC6900 SET GCELLOTHB ASIC(Optional ) SET GCELLHOFIT PEN(Optional) SET GCELLHOFIT PEN(Optional) RQSIGNLEN BSC6900 RQTRAFFLEN BSC6900 Whether to allow the BTS to report the voice quality index (VQI). If this parameter is set to Report, the BTS reports the VQI. The BSC6900 collects purpose ofstatistics on a For the the traffic accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. For the purpose of accurately reflecting the radio environment of a network, filtering is performed on the measured values in several consecutive measurement reports. RSCGRPN Rscgrp No. Resource Management Mode Resource management mode BSC6900 ADD IPPATH(Mand Resource group number of the atory) PATH ADD The parameter indicates whether RSCGRP(Man the resource group is shared or is datory) used by a management mode. The Resource specific telecom carrier. logical port working in the SHARE ADD mode can be shared by multiple IPLOGICPOR carriers. The logical port working in T(Optional) the EXCLUSIVE mode can be Timer for punishing the neighboring cells when handover failures occur SET due to resource-related causes, GCELLHOFIT such as resources being PEN(Optional) insufficient This parameter adjusts "Min RSCP ADD threshold" to enable the selection G3GNCELL(O of 3G candidate cells based on cell ptional) priorities This parameter determines the layers of 3G neighboring cells. If ADD the measured value of a 3G GEXT3GCEL neighboring cell is lower than this L(Optional) threshold, the 3G neighboring cell RSCMNGMODE BSC6900 RSCMNGMODE BSC6900 RSCPENALTYTIME R RscPenaltyTimer BSC6900 RSCPOFF RSCP Offset BSC6900 RSCPTHRES RSCP Threshold for Layer of 3G Cell BSC6900 RSDSRC RSD alarm source BSC6900 SET OPT(Optional) RSD alarm triggering source RSFSRC RSF alarm source GPRS Reselection Offset BSC6900 RSLCTOFFER BSC6900 SET OPT(Optional) SET GCELLNCRE SELECTPAR A(Optional) RSF alarm triggering source Used for calculating C2. The MS with a large value can be assigned with high access priority. RSLDL BTS RSL Average Downbandwidth BSC6900 SET BTSBWPARA Average down-bandwidth of RSL (Mandatory) link in BTS. SET BSCABISPRI Differentiated service code of the MAP(Optional) specified RSL SET BSCABISPRI MAP(Optional) RSL service priority SET BTSBWPARA Average up-bandwidth of RSL link (Mandatory) in BTS. SET BSCABISPRI MAP(Optional) Specified RSL Vlan Id SET BTSLAPDWS( Optional) Size of the RSL LAPD window LCK CMCTRL(Man reason for locking the configuration datory) and management control rights. Threshold of the level difference between a neighboring cell and the SET serving cell, based on which the OTHSOFTPA BSC filters the measured values in RA(Optional) the measurement reports and Name of the result file generated after the command is executed. If RUN this parameter is not specified, the BATCHFILE( name of the result file is Optional) automatically generated in the RSLDSCP RSL DSCP BSC6900 RSLPRI RSL Priority BTS RSL Average Upbandwidth BSC6900 RSLUL BSC6900 RSLVLANID RSL VlanId BSC6900 RSLWS RSL LAPD Window Size BSC6900 RSNDES Lock Reason Relative Signal Strength Threshold BSC6900 RSSThres BSC6900 RSTF Result File Name BSC6900 RSTFUN Restart switch BSC6900 RSTIME Restart Timer BSC6900 Max Channel RSVCHMFORECNU Num Reserved M for EC BSC6900 ADD OPC(Optional) ADD BTSPPPLNK( Optional) ADD BTSMPLNK(O SET GCELLCHMG BASIC(Option al) Whether to enable the restart function Timer Maximum number of TCH channels reserved for emergency call users RSVDPARA1 Reserved Parameter 1 BSC6900 RSVDPARA10 Reserved Parameter 10 BSC6900 RSVDPARA2 Reserved Parameter 2 BSC6900 RSVDPARA3 Reserved Parameter 3 BSC6900 RSVDPARA4 Reserved Parameter 4 BSC6900 RSVDPARA5 Reserved Parameter 5 BSC6900 RSVDPARA6 Reserved Parameter 6 BSC6900 RSVDPARA7 Reserved Parameter 7 BSC6900 RSVDPARA8 Reserved Parameter 8 BSC6900 RSVDPARA9 Reserved Parameter 9 BSC6900 SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) SET TRANSPATC HPARA(Optio nal) Parameter 1 reserved for future use. Parameter 10 reserved for future use. Parameter 2 reserved for future use. Parameter 3 reserved for future use. Parameter 4 reserved for future use. Parameter 5 reserved for future use. Parameter 6 reserved for future use. Parameter 7 reserved for future use. Parameter 8 reserved for future use. RsvIdleChanNum Reserve Idle Channel Number BSC6900 Parameter 9 reserved for future use. Number of reserved idle channels. If this parameter is set too small, SET the TRX may be frequently BSCDSTPA(O enabled/disabled; if this parameter ptional) is set too large, idle TRX will not be RT Revertive type BSC6900 SET Recovery mode of the MSP MSP(Optional) protection group RTCONTEXT Routing Context BSC6900 ADD M3LE(Optiona l) ADD M3DE(Option Routing context. The routing context identifies a specified route. If the routing context is to be configured, its value must be negotiated between the two ends. RTCPBWRATIO RTCP Bandwidth Usage BSC6900 RTCPSWITCH Enable RTCP BSC6900 ADD GCNNODE(O Ratio of the RTCP path bandwidth ptional) to the A interface bandwidth Whether to enable the real-time transport control protocol (RTCP) ADD function. The BSC6900 and the GCNNODE(O MSC negotiate whether and how to ptional) compress the data over the A ADD OMUIPRT(Ma ndatory) destination IP address. ADD OMUIPRT(Ma ndatory) routing mask. ADD BTSIPRT(Opti Index of a route. The index is onal) unique in to BTS. It is used a calculate the round-trip time of the protocol stack and the ADD RTO value. The value must be SCTPLNK(Opt smaller than "RTOBETA". In the ional) case of the fixed value of round-trip It is used to calculate the the time of the protocol stack and the ADD RTO value. The value must be SCTPLNK(Opt greater than "RTOALPHA". In the ional) case of the fixed value of the When the "RTOMIN" and ADD "RTPMAX" parameters are set to SCTPLNK(Opt fixed values, the larger the value is, ional) the longer the check of the link is. When the "RTOMIN" parameter is ADD set to a fixed value, the larger the SCTPLNK(Opt value is, the longer the check of the ional) link is. When the "RTOMAX" parameter is ADD set to a fixed value, the larger the SCTPLNK(Opt value is, the longer the check of the ional) link is. SET Whether to measure the delay on GCELLBASIC the link between the BTSs that PARA(Optiona serve the calling MS and the called l) MS respectively RTDEST Destination Network Address BSC6900 RTDESTMASK Destination Address Mask BSC6900 RTIDX Route Index BSC6900 RTOALPHA RTO alpha value BSC6900 RTOBETA RTO beta value BSC6900 RTOINIT RTO initial value BSC6900 RTOMAX RTO max value BSC6900 RTOMIN RTO min value BSC6900 RTPSWITCH Measure Link Delay Switch BSC6900 RTTI PDCH RTTIPDCHMULTIPL Multiplex EXTHRESH Threshold BSC6900 SET GCELLPSCH M(Optional) ADD BTSIPRT(Man datory) ADD IPLOGICPOR T(Optional) RTTYPE Route Type BSC6900 RUS Rate up step [kbps] Rate up step adjust period [PLPRD] BSC6900 RUSPRD BSC6900 RVer R-Version No. BSC6900 ADD IPLOGICPOR T(Optional) SET BTSAUTODL DACTINFO(M R-version number of the BTS andatory) software ADD IPPATH(Mand atory) Receive bandwidth of IP path ADD RSCGRP(Man datory) SET GCELLSERV PARA(Optiona l) Maximum number of RTTI TBFs that can be multiplexed on the PDCH. A PDCH can be assigned when the number of RTTI TBFs on it is smaller route. When the BTS Type of the than the value of this does not support IP over E1, the parameter Route Type needs to be set to NEXTHOP(Next Hop). When the BTSport speedIP over E1, the Logical supports increase step. When detecting the available bandwidth increase through IPPM, the system increases the bandwidth of the logical port by Bandwidth increase step adjustment period. This parameter indicates the period to increase the bandwidth of the logical port. Note that the actual bandwidth increase RXBW Backward Bandwidth BSC6900 RxBw Backward Bandwidth Minimum Receiving level for Access Interfere HO Qual. Thresh Offset for AMR FR BSC6900 Receive bandwidth RXLEVACCMIN BSC6900 RXLEVOFF BSC6900 RXMIN Minum Access RXLEV BSC6900 Rx_Level_Drop RXQCKFALLHOEN HO Allowed BSC6900 RXQUAL1 Interfere HO Qual. Thresh 1 for Non-AMR FR BSC6900 Minimum receiving power level for the MS in the cell to access the system FR voice services, a fixed For AMR amount of offset is added to the SET corresponding grade of the GCELLAMRQ received signal quality for the UL(Optional) interference handover of non-AMR SET GCELLBASIC Minimum received signal level of PARA(Optiona the MS. This level is reported in the l) system information. Whether to use the emergency SET handover algorithm in case the GCELLHOBA receive level of the MSs drops SIC(Optional) rapidly, thus preventing call drops. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. RXQUAL10 Interfere HO Qual. Thresh 10 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 11 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 12 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 2 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 3 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 4 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 5 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 6 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 7 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 8 for Non-AMR FR BSC6900 Interfere HO Qual. Thresh 9 for Non-AMR FR BSC6900 RXQUAL11 RXQUAL12 RXQUAL2 RXQUAL3 RXQUAL4 RXQUAL5 RXQUAL6 RXQUAL7 RXQUAL8 RXQUAL9 RXUCHAINNO RXU Chain No BSC6900 Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. Threshold for the interference SET handover of Non-AMR FR voice GCELLAMRQ services. AMRFR refers to UL(Optional) Adaptive Multi-Rate Full Rate. ADD TRXBIND2PH YBRD(Mandat Number of the RXU chain to which ory) the RXU belongs RXUCHAINNO RXU Chain No. BSC6900 SET Number of the RXU chain. The BTSRXUBP(M RXU chain No. is unique in one andatory) BTS. ADD BTSRXUBRD( Number of the RXU chain where Mandatory) the board is located ADD TRXBIND2PH YBRD(Mandat ory) Index type of the RXU SET BTSRXUBP(M andatory) Type of the RXU board index ADD TRXBIND2PH YBRD(Mandat ory) Name of the RXU SET BTSRXUBP(M Name of the RXU board. The RXU andatory) name is unique in one BTS. ADD BTSRXUBRD( Mandatory) Name of an RXU ADD TRXBIND2PH YBRD(Mandat Position number of the RXU on the ory) RXU chain SET BTSRXUBP(M Position No. of the RXU board on andatory) the RXU chain ADD BTSRXUBRD( Position of the RXU board on an Mandatory) RXU chain SET BTSRXUBP(M andatory) Type of the enable the switch to set Whether to RXU board the S1 value. S1 byte, also called the synchronization status byte, is SET one of the optical connection OPT(Optional) parameters. RXUCHAINNO RXU Chain No. BSC6900 RXUIDTYPE RXU Index Type BSC6900 RXUIDTYPE RXU Index Type BSC6900 RXUNAME RXU Name BSC6900 RXUNAME RXU Name BSC6900 RXUNAME RXU Name BSC6900 RXUPOS RXU Chain Position BSC6900 RXUPOS RXU Chain Position BSC6900 RXUPOS RXU Board Position BSC6900 RXUTYPE RXU Board Type BSC6900 S1SWITCH S1 value setting switch BSC6900 S1VALUE S1 Value BSC6900 SET OPT(Optional) SET BTSDEMUBP( Optional) SET BTSAPMUBP( Optional) SAADIS Special Analog Alarm Enabled BSC6900 SAAF Special Analog Alarm Flag BSC6900 SaGsmrMsc Trunking MSC BSC6900 SAICALLOWED Saic Allowed BSC6900 Power Control SAICTHREDAPDTV Threshold Adjust ALUE for SAIC BSC6900 Power Control SAICTHREDAPDTV threshold Adjust ALUE for SAIC BSC6900 SALOG Special Analog Alarm Enabled BSC6900 SAMECVGCELLID Same Coverage Cell No BSC6900 SAMECVGCELLIDT Same Coverage YPE Cell Index Type Same Coverage SAMECVGCELLLO Cell Load Stat. ADSTATTM Time Same Coverage SAMECVGCELLLO Cell Load ADTHRD Threshold BSC6900 BSC6900 BSC6900 ADD GCNNODE(O ptional) SET GCELLPWRB ASIC(Optional Whether an MS supports the SAIC ) function Adjustment step of the downlink signal quality threshold in power SET control algorithm III for MSs that GCELLPWR2( support SAIC. The network side Optional) uses a lower downlink signal quality Adjustment step of the downlink signal quality threshold in power SET control algorithm III for MSs that GCELLPWR3( support SAIC. The network side Optional) usesvalue of this parameter quality The a lower downlink signal consists of five bits, which SET determines whether to enable the BTSDPMUBP( alarms. "0" indicates that the Optional) analog alarm is enabled, and "1" SET GCELLDYNT URNOFF(Man Index of a cell with the same datory) coverage as the current cell SET GCELLDYNT URNOFF(Man Index type used when the datory) command is executed the load of The BSC6900 checks SET the same coverage cell of the GCELLDYNT target cell once a minute. When URNOFF(Opti the number of times in which the onal) load of thecan be coverage is is A cell that same disabled cell SET allowed to be disabled only when GCELLDYNT the load of the same coverage cell URNOFF(Opti is lower than this threshold for a onal) period. S1 sending value. It is a synchronization status byte used by the local end to examine the quality of the received clock signals before the local end switches to a clock Whether to enable the special analog alarm. In multi-mode scenario, the value of this parameter in one mode mustvalue ofsame as the value of The be the this parameter consists of 32 bits, each of which determines whether to enable the corresponding special analog alarm. "0" indicates that the alarm Whether the MSC independently processes the trunking services. When this parameter is set to YES, the MSC independently processes the trunking services, that is, the SAMECVGCELLNA Same Coverage ME Cell Name BSC6900 SAMULFRM SACCH MultiFrames BSC6900 SAS Special Alarm Switcher BSC6900 SASE Special Alarm Switch Enabled BSC6900 SASV Special Alarm Switch Valid Vol. Level BSC6900 SET GCELLDYNT URNOFF(Man datory) Name of the sameused by the BTS This parameter is coverage cell to inform the BSC6900 of radio link SET connection failure. GCELLCCBA When the BTS receives the SIC(Optional) SACCH measurement report from The value of this parameter consists of three bits, which SET determines whether to enable the BTSDPMUBP( alarms. "0" indicates that the alarm Optional) is enabled, and "1" the special Whether to enable indicates that alarm switch. SET In multi-mode scenario, the value BTSDEMUBP( of this parameter in one mode Optional) must be the same as the value of Level specifications of special Boolean value alarms. Two SET specifications are available: high BTSDEMUBP( level and low level. By default, only Optional) alarms of the door status sensor SET Whether to enable the energy BTSDOMUBP saving function of the TRX for the (Optional) BTS3002E. enable the special Whether to Boolean alarms, that is, water SET sensor alarm (bit 0), smog sensor BTSAPMUBP( alarm (bit 1), and door sensor Optional) alarm (bit 2). All the Boolean COL SYNCINFO(M Number of the BTS. The BTS is andatory) numbered uniquely in a BSC. COL SYNCINFO(M andatory) SET GCELLCCUT RANSYS(Opti onal) SET BSCPSTCDS CPMAP(Optio nal) SAVEENABLED Energy Saving Support BSC6900 SBAF Special Bool Alarm Flag BSC6900 SBTSID First BTS Index BSC6900 SBTSNAME First BTS Name BSC6900 SCALEORDER SCALE_ORDER BSC6900 Name of the BTS. The BTS is named uniquelyindicates that when This parameter in a BSC. the MS reports the EMR, it adds the value of this parameter to the received signal level, and then converts the result into the RXLEV SCDSCP DSCP of STREAM[QoS] BSC6900 SCELLFILTER Serving Cell Filter Length MR Number BSC6900 DSCP corresponding to the streaming network receives When the service measurement reports, in SET consideration of the accuracy of a GCELLHOFA single measurement report, the ST(Optional) measurement values in certain SCELLID First Cell Index BSC6900 SCELLNAME First Cell Name BSC6900 SCHEME Coding Scheme BSC6900 ADD NCELL(Mand atory) COL SYNCINFO(M ADD NCELL(Mand atory) COL SYNCINFO(M SET GCELLSBC(O ptional) ADD GSMSCB(Ma STR BTSTST(Opti onal) ADD SUBTSK(Man datory) ADD SUBCMD(Ma Number of the cell where the TRX reside. The cell is numbered uniquely in a BSC. Name of cell 1. A key parameter that indicates the coding scheme of a simple cell broadcast message SCHNNO Sub Channel No. BSC6900 SCMD Command String BSC6900 Number of string of the scheduled Command the sub-channel subtask. This command can be only a service command, and the system command cannot be added to the scheduled subtask. SCOPETYPE Scope Type Subrack Communication Path Index BSC6900 SET GMRSCOPE( Type of querying the scope of Mandatory) collecting the measurement report ADD SRCONPATH (Optional) ADD GEXT3GCEL L(Mandatory) SET GCELLHOFD EXP ALMLOG(Opti onal) STA ALMLOG(Opti ADD SCTPLNK(Ma ndatory) ADD M3LNK(Mand SCPIDX BSC6900 SCRAMBLE Scrambling Code or Cell Parameter Id BSC6900 Indicates the index of the intersubrack connection a 3G cell. The Scrambling code of path scrambling code is used to differentiate terminals or cells. It is used after spread spectrum. Therefore, it does not change the SCSN Start Serial No. BSC6900 Start serial number of the alarm record SCTP link number of XPU board. This number identifies an SCTP link uniquely. SCTPLNKN SCTP link No. BSC6900 SD Start Date BSC6900 ADD SUBTSK(Man Date when the scheduled task is datory) started EXP Start date of the alarm record. By ALMLOG(Opti default, the start date is 2000-01onal) 01. SD Start Date BSC6900 SD Start Date BSC6900 STA Start date of the alarm record. By ALMLOG(Opti default, the start date is 2000-01onal) 01. SET ALMCAPACIT Maximum number of days for Y(Optional) storing history alarms SD Alarm Log Saved Time BSC6900 SDALMTHD SD Alarm Threshold BSC6900 SET MSP(Optional) SD alarm triggering threshold STR BTSLOG(Opti onal) Start date SET TZ(Mandatory ) ADD GCELLQUICK SETUP(Optio nal) SDATE Start Date BSC6900 SDAY Start date BSC6900 SDCCHNUM SDCCHChannel Number Waiting for MR on SDCCH Switch BSC6900 SDCCHWaitMREn BSC6900 Start date of the daylight saving time (DST) SDCCH channels. Number of Rules for SDCCH channel allocation: 1. Allocate channels 1 and 3 of main frequency B preferentially. 2. Allocate channels Whether a call must camp on the SET SDCCH for a specific duration GCELLHOAD( before being assigned with a traffic Optional) channel. SET GCELLHOAD( Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) Duration for a call camping on the SDCCH before being assigned with a traffic channel. measuring the Level threshold for number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whetherthreshold for measuring the Quality the downlink receive level number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whether the downlink quality level Level threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whetherthreshold for measuring the Quality the uplink receive level is number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whether the uplink quality level Duration for SDCCHWaitMRTime Waiting MR on Len SDCCH DL Level Threshold for SDDROPSTATDLLE SDCCH Call V Drop DL Quality Threshold for SDDROPSTATDLQ SDCCH Call UAL Drop UL Level Threshold for SDDROPSTATULLE SDCCH Call V Drop UL Quality Threshold for SDDROPSTATULQ SDCCH Call UAL Drop BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 SDDYN SDCCH Dynamic Allocation Allowed BSC6900 SET GCELLBASIC PARA(Optiona l) Whether to allow SDCCH dynamic allocation, that is, whether to allow dynamic conversion between TCHs and SDCCHs. SDENABLE SD Enable BSC6900 SDFASTHOSWITC H SD Quick HO BSC6900 SDFLAG Shut Down Enabled BSC6900 SDHOMININTV Min Interval for SDCCH Hos BSC6900 SET MSP(Optional) Enable SD enable the SDCCH Whether to quick handover test function. If this SET parameter is set to Yes, the GCELLSOFT( BSC6900 initiates intra-cell Optional) SDCCH handover as soon as the This parameter specifies whether the BSC6900 automatically shuts SET down the power amplifier of the GTRXDEV(Op TRX to save power when the BTS tional) is powered by batteriesassigned to After a new SDCCH is after a an MS, the MS can be handed over SET to another channel only if the time GCELLHOCT during which the MS occupies the RL(Optional) SDCCH is longer than the period SET Maximum number of discarded GCELLPWR3( MRs allowed on the SDCCH in a Optional) power control period penalty is Period in which level performed on the neighboring cells ADD of the cell where a fast-moving MS GEXT2GCEL is located. The neighboring cells L(Optional) must be located atpenalty that is Level value of the the Macro, performed on the neighboring cells ADD of the cell where a fast-moving MS GEXT2GCEL is located. The neighboring cells L(Optional) must be located at the Macro, SET BSCPSTCDS CPMAP(Optio DSCP corresponding to the nal) signaling SDMRCUTNUM SdMrCutNum BSC6900 SDPUNTIME Penalty Time on Tast Moving HO BSC6900 SDPUNVAL Penalty on Fast Moving HO BSC6900 SDSCP DSCP of Signaling BSC6900 SDSFPRI SDSF Priority BSC6900 SDT Shutdown Temperature Sliding Time Window Alarm Disappear BSC6900 SDTMWDALMDIS BSC6900 SET Specifies the SF and SD event MSP(Optional) priority High temperature threshold for triggering power shutdown of the SET battery. If the power shutdown BTSAPMUBP( upon battery high temperature is Optional) enabled andwindow for collecting Sliding time the battery ADD statistics on the alarms that BTSALMMGM disappear in a specified period of RULE(Mandat time.Sampling time window. In the ory) period specified by this parameter, SDTMWDALMOC Sliding Time Window Alarm Occurrence BSC6900 SDV Shutdown Voltage BSC6900 SEARCH3G 3G Search PRIO BSC6900 SELFVERSION Self Version BSC6900 Sliding time window for collecting statistics on the alarms that occur in a specified period of time.This parameter is similar to the sampling time window.for triggering Low voltage threshold In the power shutdown of the battery. If SET the power shutdown upon low BTSAPMUBP( voltage is enabled and the load Optional) voltage is lower than the value of SET GCELLCCUT Whether to allow the MS to search RANSYS(Opti for a 3G cell when the BSIC must onal) be decoded SET BTSLOADCT RL(Mandatory ) Self Software Version ADD BTSALMMGM RULE(Mandat ory) SET OTHSOFTPA RA(Optional) SET OTHSOFTPA RA(Mandatory ) SET GCELLSOFT( Optional) SET AITFOTHPAR A(Optional) SET OTHSOFTPA RA(Optional) SET GCELLGSMR (Optional) SET GCELLGSMR (Optional) This parameter specifies whether the SI Type 3 message contains the 2QUATER indicator. Whether to report BSS INVOKE TRACE message. When the parameter is set to YES, the BSC sends a BSS INVOKE TRACE message to the MSC if receiving Whether to report the classmark queried by the BSC6900 to the MSC Whether to send a CONFUSION message to the MSC. This parameter specifies whether to send a message carrying fault location information to the MSC if If this parameter is set to No, the BSC responds with an SAPI N'Reject message against the DL short message after hangup. Priority of the notification message transmission on the FACCH. From high to low, the priorities are A, B, 0, 1, 2, 3, 4. No priority is the lowest. of the paging message Priority When the priority of the transmission on the FACCH. From high to low, the priorities are A, B, 0, 1, 2, 3, 4. No priority is the lowest. When the priority of the Support Sent Send2QuterFlag 2QUATER Spt BSS Invoke Trace SendBssInvokeTrac Rpt[end2end e user trace] BSC6900 BSC6900 Send Classmark SENDCMAFTERINB ENQ Result to SCHO MSC Enabled BSC6900 SendConfusionToM Sent Confusion SC Message to MSC BSC6900 Send Downlink SENDDOWNLINKM Message after ESSAGE Hanging up Send FACCH SENDFACCHNOTP Notification RI Priority BSC6900 BSC6900 SENDFACCHPAGP Send FACCH RI Paging Priority BSC6900 SENDSAMBE BSC Auto Link Flag BSC6900 SET BTSOTHPAR A(Optional) The time for BTS reset. Send System SENDSI2TERFLAG Information 2ter BSC6900 SET Whether the BSC sends the OTHSOFTPA System Information Type 2ter RA(Optional) message. SET OTHSOFTPA RA(Optional) Whether the BSC sends the System Information Type 5ter message. SI Type 3 message Whether the contains the 3G Early Classmark SET Sending Restriction field. The 3G OTHSOFTPA Early Classmark Sending RA(Optional) Restriction field is used to notify the SPT BTSRXUCHAI N(Mandatory) Split position on the RXU chain Whether to enable the BTS to support the separation between the physical and logical. Whether the ADD BTS supports the separate mode. BTS(Optional) When a BTS is in separate mode, Number of the command listening SET port of the server. You should not FTPSSRV(Ma use any port number occupied by ndatory) other applications. Number of the data port of the SET server in active mode. You should FTPSSRV(Ma not use any port number occupied ndatory) by other applications. ADD BTSRETANT( Mandatory) ADD FTPSCLTDP ORT(Mandato ry) Send System SENDSI5TERFLAG Information 5ter BSC6900 SendUtranECSCFla Send 3G Class g Flag BSC6900 SEPARATEPOS Separate Position BSC6900 SEPERATEMODE Separate Mode The Command Port of FTP Server BSC6900 SERCMDPORT BSC6900 SERDATAPORT The Source Date Port of FTP Server BSC6900 SERIALNO Device Serial No. BSC6900 Delivery serial number of the RET antenna ServerIP FTP Server IP Address BSC6900 IP address of the FTP server to be visited by the FTP client ServiceMode Service mode BSC6900 SET Service mode of the BSC6900. BSCBASIC(O This parameter specifies ptional) configuration mode of subracks. SERVICEMODE Service Type BSC6900 SERVICEMODE Service Type BSC6900 ADD BTS(Optional) Service bearer mode of the BTS ADD BTSAUTOPL AN(Mandatory ) Service bearer mode of the BTS ServiceName Service Name BSC6900 SERVICETYPE Service Type BSC6900 Diesel Engine SETDIESELENGINE Configure ENABLED Enabled BSC6900 SETENVPARAENAB ENV TEMP CFG LED Enabled BSC6900 SETENVPARAENAB ENV TEMP CFG LED Enabled BSC6900 Environment Humidity SETHUMPARAENA Configure BLED Enabled BSC6900 SFPPORTNO SFP Port No BSC6900 EXP LOG(Optional) Name of the command function Service type of the BTS. The QoS SET processing depends on the DSCP, BTSVLAN(Ma VLAN ID, and VLAN priority that ndatory) vary according to the service type. SET BTSAPMUBP( Optional) Whether to enable the diesel SET engine parameters to be BTSDPMUBP( configured enable the environment Whether to temperature alarm parameters of SET the APMU to be configured. The BTSAPMUBP( APMU of the APM30 type does not Optional) support this enable the environment Whether to parameter. temperature parameters to be SET configured. BTSDPMUBP( In multi-mode scenario, the value Optional) of this parameter inthe environment SET Whether to enable one mode BTSAPMUBP( humidity alarm parameters of the Optional) board to be configured. SET In multi-mode scenario, the value BTSDPMUBP( of this parameter in port.mode Number of the SFP one If the switching relation is added on the ADD SFP port, it indicates that the SFP BTSSFPMOD port is used to connect the BBU E(Mandatory) and no RXU chain or ring can be ADD SGSNNODE( Optional) Available capacity of the SGSN ADD SGSN(Mandat ory) ADD GCNOPERAT OR(Mandatory ) SGSNCAP Configure Capacity<K User Number> BSC6900 SGSNNAME SGSN Name BSC6900 SGSNNRILEN SGSN NRI Length BSC6900 SGSNNULLNRI SGSN NullNRI Value BSC6900 SGSNPOOLALLOW Allow SGSN Pool BSC6900 Name of the SGSN Length of the NRI or NULL-NRI. The length determines the maximum value of the NRI and NULL-NRI. Each SGSN pool has Special NRI. one NULL-NRI. When the NRI ADD value in the TLLI of the MS GCNOPERAT uplink/downlink service data equals OR(Optional) NULL-NRI, the BSC6900 reselects Whether to enable the SGSN pool function. With SGSN pool, a ADD BSC6900 is connected to multiple GCNOPERAT SGSNs in the pool, and load OR(Optional) balancing and resource sharing SGSNR Protocol Version Supported by SGSN BSC6900 SGSN Management Status SGSNSTATUS BSC6900 Share in CPU SHAREINCPURATE Rate BSC6900 SHARESN Load Sharing Slot No. BSC6900 SET GCELLPSBA Protocol version supported by the SE(Optional) SGSN Administrative state of the SGSN. The value "ALLOW" indicates that ADD the SGSN can handle the PS SGSNNODE( services normally. The value Optional) "UNISTALL" indicates that the call Usage threshold of the CPU for access from other CPU. If the SET usage of the CPU exceeds the BSCFCPARA( threshold, the call access request Optional) is discarded. ADD ABISLOADSH ARE(Mandato Slot number of the load sharing ry) interface board SET BTSSHARING (Optional) Whether to allow sharing SET ALMSHLD(Ma ndatory) Shield flag of the alarm This parameter specifies the delay SET time before shutting down the BTSBAKPWR TRXs when the BTS experiences a (Optional) power failure. Whether the BSC sends a System Information Type 2ter message to SET a non-dualband cell. When the OTHSOFTPA parameter is set to YES, the cell RA(Optional) does not send the System SET GCELLHOBA Whether to enable a handover SIC(Optional) between signaling channels ADD AISSCFG(Opti onal) ADD MTP3RT(Man datory) ADD MTP3LKS(Ma ADD M3RT(Mandat ory) ADD M3LKS(Mand Number of times that the downlink signal strength exceeds the threshold SHARINGALLOW Sharing Allow BSC6900 SHLDFLG Shield Flag BSC6900 SHUTDOWNTRXST Shutdown TRX ARTTIME Start Time[T2] BSC6900 SI2TerSwitch SI 2ter Switch BSC6900 SIGCHANHOEN SDCCH HO Allowed BSC6900 SIGLAST Signal Strength Duration Times BSC6900 SIGLKSX Signalling link set index BSC6900 Uniquely identifies a signaling link set SIGLKSX Signalling link set index BSC6900 Uniquely identifies a signaling link set SIGLNKID Signaling link ID BSC6900 SIGLW Signaling Load Weight BSC6900 SIGLW Signaling Load Weight BSC6900 ADD M3LNK(Mand ID of an M3UA link in the specified atory) link set local weight over the local Signaling NSVL. When this parameter is set ADD to a larger value, the NS is more NSVLLOCAL( likely to select this IP point Optional) accordinglocal weightsharing Signaling to the load over the remote NSVL. When this ADD parameter is set to a larger value, NSVLREMOT the NS is more likely to select this E(Optional) IP point according to the load SET BSCSRVPRI( Priority of the signaling service.0 is Optional) the highest priority. ADD AISSCFG(Opti Number of times that the downlink onal) signal is of measurement reports Number measured used for averaging the signal SET quality of signaling channels. This GCELLHOFIT parameter helps avoid sharp drop PEN(Optional) of signal levels caused by Raileigh ADD MTP3LNK(Ma ID of an MTP3 link in a specified ndatory) link set of measurement reports Number used for averaging the signal SET strength of signaling channels. This GCELLHOFIT parameter helps avoid sharp drop PEN(Optional) of signal levels caused by Raileigh Minimum interval between the SET successful TBF establishment and BSCPSSOFT the first initiation of the Packet PARA(Optiona Timeslot Reconfiguration l) procedure exclude MSISDN Single pass number 1. Certain numbers, such SET as the premium rate number, are BSCBASIC(O not used for the single pass check. ptional) The numberexclude MSISDN Single pass is stored in character number 10. Certain numbers, such SET as the premium rate number, are BSCBASIC(O not used for the single pass check. ptional) The numberexclude MSISDN Single pass is stored in character number 11. Certain numbers, such SET as the premium rate number, are BSCBASIC(O not used for the single pass check. ptional) The number is stored in character SIGNALSP Signal Service PRI Signal Strength Observation Times BSC6900 SIGOBS BSC6900 SIGQUAFLTLEN Filter Length for SDCCH Qual BSC6900 SIGSLC Signalling link code BSC6900 SIGSTRFLTLEN Filter Length for SDCCH Level BSC6900 Interval Between SilenceTicksOfResR Resource eq Request BSC6900 Single Pass SinglePassExcludeM Exclude Msisdn sisdn1 Number 1 Single Pass SinglePassExcludeM Exclude Msisdn sisdn10 Number 10 Single Pass SinglePassExcludeM Exclude Msisdn sisdn11 Number 11 BSC6900 BSC6900 BSC6900 Single Pass SinglePassExcludeM Exclude Msisdn sisdn12 Number 12 Single Pass SinglePassExcludeM Exclude Msisdn sisdn13 Number 13 Single Pass SinglePassExcludeM Exclude Msisdn sisdn14 Number 14 Single Pass SinglePassExcludeM Exclude Msisdn sisdn15 Number 15 Single Pass SinglePassExcludeM Exclude Msisdn sisdn16 Number 16 Single Pass SinglePassExcludeM Exclude Msisdn sisdn17 Number 17 Single Pass SinglePassExcludeM Exclude Msisdn sisdn18 Number 18 Single Pass SinglePassExcludeM Exclude Msisdn sisdn19 Number 19 Single Pass SinglePassExcludeM Exclude Msisdn sisdn2 Number 2 Single Pass SinglePassExcludeM Exclude Msisdn sisdn20 Number 20 Single Pass SinglePassExcludeM Exclude Msisdn sisdn3 Number 3 Single Pass SinglePassExcludeM Exclude Msisdn sisdn4 Number 4 BSC6900 SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 Single pass exclude MSISDN number 12. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 13. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 14. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 15. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 16. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 17. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 18. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 19. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 2. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 20. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 3. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 4. Certain numbers, such as the premium rate number, are not used for the single pass check. The number is stored in character Single Pass SinglePassExcludeM Exclude Msisdn sisdn5 Number 5 Single Pass SinglePassExcludeM Exclude Msisdn sisdn6 Number 6 Single Pass SinglePassExcludeM Exclude Msisdn sisdn7 Number 7 Single Pass SinglePassExcludeM Exclude Msisdn sisdn8 Number 8 Single Pass SinglePassExcludeM Exclude Msisdn sisdn9 Number 9 BSC6900 SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) SET BSCBASIC(O ptional) BSC6900 BSC6900 BSC6900 BSC6900 Single pass exclude MSISDN number 5. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 6. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 7. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 8. Certain numbers, such as the premium rate number, are not used for the single pass check. The numberexclude MSISDN Single pass is stored in character number 9. Certain numbers, such as the premium rate number, are not used for the single pass check. The number is stored in character SIPADDR Source IP address BSC6900 PING IP(Mandatory) Source IP address TRC IPADDR(Optio nal) Source IP address SIPADDR Source IP address BSC6900 SITES Sites BSC6900 SITESYNCZONE Site Sync Zone BSC6900 SLAVEIPADDR Clock Server IP Address 2 BSC6900 Sub-Location SLAVELOCGRPNO Group No. BSC6900 SLPTYPE Self Loop Type BSC6900 COL Log of which site need to be LOG(Optional) collected. the BTS synchronizes Zone where with other BTSs. Only two BTSs SET with the same synchronization zone BTSAISS(Man can be synchronized in a datory) synchronization task. SET The IP address must be a valid BTSIPCLKPA class A, B, or C address, and it RA(Mandatory cannot be a broadcast address or ) network address. ADD BTSBINDLOC No. of the location group under the GRP(Mandato BTS. The location group No. is ry) unique for each BTS. Self-loop type. The precautions are STR as follows: TRANSPERF 1. If the self-loop type is set to TST(Mandator "E1SELFLOOP" and the BTS type y) is BTS3002C, BTS3001C, or SLSMASK Signalling route mask BSC6900 SLVSERVACTDELA Slave Service Y Active Delay BSC6900 SM StartType BSC6900 Signaling route load sharing. In the value, the number of 1s ADD (represented by n) determines the N7DPC(Optio maximum number (2) of routes for nal) the load sharing. For example, If no handshake message is SET received from the peer within the GBSCREDGR delay, the slave service is P(Optional) activated. start date. "WEEK" Type of the indicates that the start date is a SET weekday. "DATE" indicates that the TZ(Mandatory start date is a month day. ) "DATEWEEK" indicates the start ADD GEXTSMLC( Mandatory) ADD GEXTSMLC( Mandatory) SMLCIDX SMLC Index BSC6900 Index of the SMLC SMLCMode SMLC Mode BSC6900 Whether the built-in SMLC or external SMLC is used in the BSS. SMOKE_MASK Enable Smoke Alarm Reporting BSC6900 ADD EMU(Optional ) Smog alarm switch SET TZ(Mandatory ) SET FCCPUTHD( Optional) SET FCMSGQTHD SWP BRD(Mandato ry) STR BKP(Mandator SMONTH Start month BSC6900 SMWINDOW Filter window BSC6900 Month in which DST starts Number of CPU usage samples involved in the calculation of the average CPU usage in the sliding window SN Slot No. BSC6900 Number of the slot SN Slot No. BSC6900 SN Slot No. BSC6900 DLD TCFILE(Mand atory) Number of the slot ADD MTP3LNK(Opt ional) ADD Number of the slot where the XPU SCTPLNK(Ma board is located ADD M3LNK(Mand Number of the slot where the XPU atory) board is located SN Slot No. BSC6900 SN Slot No BSC6900 SET PHBMAP(Man datory) ADD ATERE1T1(M Number of the slot BLK ATERE1T1(M andatory) BLK AE1T1(Manda tory) ADD PBE1T1(Mand EXP ALMLOG(Opti onal) STA ALMLOG(Opti A key field used to identify the Ater timeslot and indicate the number of the Ater interface timeslot SN BM Slot No BSC6900 SN Slot No. BSC6900 Number of the slot SN Slot No. BSC6900 SN Slot No. BSC6900 SN Slot No. BSC6900 SN Main Board Logic slot No. BSC6900 SN Slot No. BSC6900 Number of the slot where the alarm is generated Number of the slot where the alarm ADD is generated, the number of the slot OBJALMSHL where the OMU board is positioned D(Optional) is not supported SET E1T1LOP(Ma ndatory) LOP Indicates the slot number for E1T1(Mandat running this command SWP ETHPORT(Ma ndatory) ADD Slot number for running this ETHREDPOR command ADD GCBSADDR( Mandatory) Number of the slot. The subrack SET number and slot number uniquely TCPLYVOICE identify a board. ADD GIURGCONN (Mandatory) SWP BTSRING(Opt ional) SWP BTSOMLLINK ADD BTSBFD(Opti onal) ADD BTSIPRTBIN Slot No. of the subsystem where the Iur-g common connection is established SN Slot No. BSC6900 SN Slot No. BSC6900 Number of the slot where the BTS board is located SN Slot No. BSC6900 Number of the slot where the BTS board is located SN Slot No. BSC6900 ADD NSE(Mandato Slot number of the XPU board ry) bound to the NSE SN Slot No. BSC6900 SN Port Slot No. BSC6900 ADD PBSL(Mandat ory) ADD BTSSFPMOD E(Optional) SET BTSFORBIDT Slot number of board to which Pb signaling link belongs Number of the slot where the port is located SN Slot No. BSC6900 SNDMD Send Mode BSC6900 ADD BTSCONNEC Slot number of the BSC6900 board T(Mandatory) thatsend mode of to the BTS RF is connected the TRX. The BTS3006C and BTS3002E do SET not support Wide Band Combining, GTRXDEV(Op Power Booster Technology, DPBT, tional) or Transmitter Independent or SET BTSRXUBP(O The connection mode between the ptional) DRRU and the antenna. SET BTSRXUBP(O The connection mode between the ptional) DRFU and the antenna. SET BTSRXUBP(O The connection mode between the ptional) MRRU/GRRU and the antenna. SET BTSRXUBP(O The connection mode between the ptional) MRFU/GRFU and the antenna. SET BTSRXUBP(O ptional) SET SNTPCLTPA RA(Mandatory ) SndRcvMode DRRU Sending Receiving Mode BSC6900 SndRcvMode1 DRFU Sending Receiving Mode MRRU/GRRU Sending Receiving Mode MRFU/GRFU Sending Receiving Mode BTS3900E Sending Receiving Mode BSC6900 SndRcvMode2 BSC6900 SndRcvMode3 BSC6900 SndRcvMode4 BSC6900 The connection mode between the BTS3900E and the antenna. SP Sync Period BSC6900 SPC OSP code[Whole Number] BSC6900 Synchronization period of the SNTP integer, the OSP code can As an client service be expressed by a decimal digit or a hexadecimal digit. If the OSP ADD code is expressed by a OPC(Optional) hexadecimal digit, H' is added ADD OPC(Mandato Number of bits contained in the ry) signaling point code SPCBITS OSP code bits BSC6900 SPCDNF OSP code[Divided Number] BSC6900 ADD OSP code expressed in the form of OPC(Optional) segments 8-8-8 ADD PBE1T1(Mand atory) ADD OPC(Optional) ADD N7DPC(Optio nal) SET GCELLCCBA SIC(Optional) SET BTSFMUABP( Optional) SET BTSFMUABP( Optional) SPCIC Start PCIC BSC6900 SPDF Signal point data format BSC6900 SPECACC Special Access Control Class BSC6900 SPECIALSWITCH Special Alarm Switch BSC6900 Special Alarm SPECIALSWITCHE Valid Level RLEVEL Configuration BSC6900 Start CIC of the E1/T1 of the Pb interface Data format of the specified signaling point. When this parameter is set to "WNF", the SPC is expressed in the form of an integer number. This parameter is used for load control. It determines whether the users of special access class are allowed to access the network. Value 1 indicatesparameter is not The value of this that access consists of seven bits. Each bit determines whether to enable the one-way Boolean alarm. "0" indicates thatthis parameter The value of the one-way Boolean consists of five bits. Each bit determines whether the one-way Boolean alarm is triggered by low level or high level. "0" indicates that Speech VER SpeechVerInAssCm Send Flag in ASS p CMP BSC6900 Speech VER SpeechVerinHoPerfo Send Flag in HO rm Perform BSC6900 SpeechVerSend SpeechVerInHoReq Flag in HO REQ Ack ACK SET Whether to contain the information MSGSOFTPA element of Speech_Ver in the RA(Optional) Assignment Complete message SET Whether to contain the information MSGSOFTPA element of Speech_Ver in the RA(Optional) Handover Perform message SET Whether to contain the information MSGSOFTPA element of Speech_Ver in the RA(Optional) HO_REQ_ACK message SET MSGSOFTPA RA(Optional) SET BTSCHNFALL BACK(Mandat ory) SET BTSCHNFALL BACK(Mandat ory) Whether to contain the information element of Speech Ver in the HO_RQD message Speech version mode that the BTS uses for the VGCS call number in the timeslot in the TRX in fallback mode Speech version mode that the BTS uses for the VGCS call number in the timeslot in the TRX in fallback mode BSC6900 HO_RQD SpeechVerInHoRqd Speech VER BSC6900 SPEECHVERMODE Speech Version 1 Mode 1 BSC6900 SPEECHVERMODE Speech Version 2 Mode 2 BSC6900 SPEECHVERSION Speech Version BSC6900 SET BTSCHNFALL BACK(Mandat ory) SET ETHPORT(Op tional) SET GCELLHOAD( Optional) SET GCELLHOAD( Optional) SET GCELLPSBA SE(Optional) ADD GCNOPERAT OR(Optional) SPEED ETHPORT SPEED BSC6900 SPEEDPUNISH Penalty on MS Fast Moving HO BSC6900 SPEEDPUNISHT Penalty Time on Fast Moving HO BSC6900 SPGCCCCHSUP Support SPLIT_PG_CYC LE on CCCH BSC6900 SpprtCB Support Cell Broadcast Allow Common Measurement at Iur-g BSC6900 Speech version configured on the TRX timeslot when the BTS works in fallback mode. When "CHNTYPE" of the TRX timeslot is set toover the GE electrical of this Rate "FULLTCH", value 0 port. When this parameter is set to 1000M, the GE electrical port performs negotiation at the rate of 1000 Mbit/s.of the penaltythe is Level value If, however, that performed on the neighboring cells of the cell where a fast-moving MS is located. The neighboring cells must be locatedpenaltyMacro, Period in which at the is performed on the neighboring cells of the cell where a fast-moving MS is located. The neighboring cells must be located at the Macro, Whether to support SPLIT_PG_CYCLE on CCCH. The parameter SPLIT_PG_CYCLE is used to define the DRX period. You can specify whether the paging This parameter specifies whether the BSC6900 supports the cell broadcast function and whether the BSC6900 supports simple cell broadcast or standard cell SPTCOMMMEAS BSC6900 ADD Whether to support the common GNRNC(Optio bidirectional measurement nal) procedure on the Iur-g interface. ADD GNRNC(Optio nal) SET GCELLGPRS( Optional) SET GCELLGPRS( Optional) SET BSCPSSOFT PARA(Optiona l) ADD GCNNODE(O ptional) Whether to support the bidirectional information exchange procedure on the Iur-g Inter-RAT Whether to support In interface. Inter-cell PS Handover. The MS in the UMTS cell can be handed over to the BSC local cell through PS handoversupport Out Inter-RAT Whether algorithm. Inter-Cell PS Handover. The MS in the BSC local cell can be handed over to the UMTS cell through PS handoverthe function of Network Whether algorithm. Assisted Cell Change (NACC) resource guarantee is allowed. In NC2 or NACC cell reselection, if this parameter is set to YES, Whether the BSC forwards the paging message from the trunking MSC to the MS. When this parameter is set to YES, the BSC forwards the paging message from SPTINFOEXCHG Allow Info Exchange at Iur-g BSC6900 Support In InterSPTINTERRATINBS RAT Inter-cell PS CPSHO Handover BSC6900 Support Out InterSPTINTERRATOUT RAT Inter-Cell BSCPSHO PS Handover BSC6900 Support NACC SPTNACCResGuara Resource ntee Guarantee Support Paging Message from Trunking MSC BSC6900 SptPaging BSC6900 SptPbLapdCheck Support Pb Lapd Check BSC6900 SET OTHSOFTPA RA(Optional) SET OTHSOFTPA RA(Optional) SET OTHSOFTPA RA(Optional) SET OTHSOFTPA RA(Optional) SET BSCBASIC(O ptional) SET GCELLGPRS( Optional) SET BTSRXUBP(O ptional) SptPbResCheck Support Pb Resource Check BSC6900 Support Pb Single Pass SptPbSglPassCheck Check BSC6900 SptPCICCheck Support PCIC Check BSC6900 SptRanSharing Support RAN Sharing BSC6900 Support Reduced SPTREDUCELATEN Latency CY Capability BSC6900 SPTSHARING RanSharing Support BSC6900 Whether to enable the layer 3 check mechanism on the LAPD links. If the PCU_BSC_LAPD_CHECK_ACK messageto enable the enhanced Whether cannot be received on resource check on the Pb interface. The introduction of enhanced resource check is to improve the efficiencyto enable thechecking and Whether of resource single pass check function on the Pb links between the BSC and the external PCU. When the Pb link is in single pass mode,enable the PCIC check Whether to a corresponding alarm function on the Pb links between the BSC and the external PCU. When the configuration of the PCIC of the support inconsistent Whether to BSC is RAN Sharing.RAN sharing refers to the technique that the GBSS equipment is categorized into multiple logical GBSS equipment, Cell supports reduced latency capability. This parameter is used to reduce the latency during the transmission, thus improving the user experience for conversational whether the main operator enables the RanSharing function. If the RanSharing function is enabled, one to three co-operators can be configured to share the BSS. SPTSTATEFWL Support State Firewall BSC6900 SPX OSP index BSC6900 SRANMODE Is Support Normalized Data Configuration BSC6900 SRANMODE Is Support SingleRAN Mode BSC6900 SRANMODE Is Support SingleRAN Mode BSC6900 SET FTPSCLT(Opt Whether the FTP client supports ional) the state firewall ADD OPC(Mandato ry) ADD N7DPC(Mand Uniquely a base station supports Whether identifies an OSP normalized data configuration. ADD Normalized data configuration BTS(Mandator means that the cabinets, subracks, y) slots, transmission ports, and userWhether the data configuration of ADD the SingleRAN BTS supports BTSAUTOPL normalized SingleRAN mode. AN(Mandatory Normalized SingleRAN mode ) means that the rules of definingof Whether the data configuration the SingleRAN BTS supports ADD normalized SingleRAN mode. BTSCABINET Normalized SingleRAN mode (Optional) means that the rules of defining SRC2GNCELLID Source Cell Index BSC6900 SRC2GNCELLNAM Source Cell E Name BSC6900 ADD G2GNCELL(M andatory) ADD GIBCAPNCG ADD G2GNCELL(M andatory) ADD GIBCAPNCG A cell Index must be unique in one BSC6900 . It is used to uniquely identify a cell. SRC3GNCELLID Source Cell Index BSC6900 Name of a cell A source cell index must be unique in one BSC. It is used to uniquely ADD identify a source cell. G3GNCELL(M The value of this parameter ranges andatory) from 0 to 2047. ADD G3GNCELL(M andatory) Name of a source cell ADD G2GNCELL(M andatory) Source cell ID to be executed: The The batch file content of the batch file consists of RUN service commands to be executed BATCHFILE( in batches. The source file is Mandatory) located in the FTP subdirectory of ADD Priority of the clock source.There CLKSRC(Man are four priorities (in descending datory) order): 1, 2, 3, 4. SET CLKMODE(M andatory) Priority of the clock source Whether the currently used ADD handover algorithm in the source G2GNCELL(O cell is HO Algorithm I or HO ptional) Algorithm II ADD BTSBFD(Man datory) Source IP address of BFD Session. ADD G2GNCELL(M Local area code (LAC) of the andatory) source cell ADD G2GNCELL(M Mobile country code (MCC) of the andatory) source cell SRC3GNCELLNAM Source Cell E Name BSC6900 SRCCI Source Cell CI BSC6900 SRCF Source File Name BSC6900 SRCGRD Clock source priority BSC6900 SRCGRD Clock source priority Current HO CTRL Algorithm in Source Cell BSC6900 SRCHOCTRLSWIT CH BSC6900 SRCIP Source IP Address BSC6900 SRCLAC Source Cell LAC BSC6900 SRCMCC Source Cell MCC BSC6900 SRCMEPID MEP ID BSC6900 PING MAC(Mandato ry) TRC Identifies a maintenance point in MAC(Mandato the maintenance group ADD G2GNCELL(M Mobile network code (MNC) of the andatory) source cell ADD TSCROSS(Ma ndatory) Source of timeslot cross ADD CLKSRC(Man datory) Type of the clock source. ADD TSCROSS(Ma ndatory) SWP BRD(Mandato ry) STR BKP(Mandator ADD SUBRACK(Ma ndatory) SET CLK(Mandator ADD MTP3LNK(Opt ional) ADD SCTPLNK(Ma ADD RSCGRP(Man datory) SET PHBMAP(Man SRCMNC Source Cell MNC BSC6900 SRCPORTNO Source port No. BSC6900 SRCT Clock source type BSC6900 SRCTSMASK Source timeslot mask BSC6900 Source timeslot mask SRN Subrack No. BSC6900 Number of the subrack SRN Subrack No. BSC6900 Number of the subrack SRN Subrack No. BSC6900 Number of the subrack where the XPU board is located SRN Subrack No. BSC6900 Number of the subrack SRN Subrack No. BSC6900 SRN BM Subrack No BSC6900 ADD M3LNK(Mand atory) Number of the subrack It is one key field of identifying the BLK Ater timeslot and indicates the ATERE1T1(M subrack No. of the Ater interface andatory) timeslot. SRN Subrack No. BSC6900 COL LOG(Optional) Number of the subrack. SRN Subrack No. BSC6900 SRN Subrack No. BSC6900 SRN Subrack No. BSC6900 EXP ALMLOG(Opti onal) STA ALMLOG(Opti ADD ETHMD(Mand atory) ADD ETHTRK(Man ADD GCBSADDR( Mandatory) SET TCPLYVOICE ADD GIURGCONN (Mandatory) SWP BTSRING(Opt ional) SWP BTSOMLLINK ADD BTSBFD(Opti onal) ADD BTSIPRTBIN Number of the subrack where the indicator alarm to be queried is generated The subrack number for running this command The subrack number uniquely identifies a subrack. Subrack No. of the subsystem where the Iur-g common connection is established SRN Subrack No. BSC6900 SRN Subrack No. BSC6900 Number of the subrack where the BTS board is located SRN Subrack No. BSC6900 Number of the subrack where the BTS board is located SRN Subrack No. BSC6900 ADD NSE(Mandato Subrack number of the XPU board ry) bound to the NSE ADD PBSL(Mandat ory) ADD BTSSFPMOD E(Optional) SET BTSFORBIDT SRN Subrack No. BSC6900 Subrack number of board to which Pb signaling link belongs SRN Port Subrack No. BSC6900 Number of the subrack where the port is located SRN Subrack No. BSC6900 ADD BTSCONNEC Subrack number of the BSC6900 T(Mandatory) board that is connected to the BTS ADD Number of the subrack at one end SRCONPATH of the inter-subrack connection (Mandatory) channel ADD Number of the subrack at the other SRCONPATH end of the inter-subrack connection (Mandatory) channel SRN1 Subrack 1 No BSC6900 SRN2 Subrack 2 No BSC6900 SRName Subrack name BSC6900 ADD SUBRACK(Ma ndatory) Name of the subrack to be added SET BTSTMA(Man datory) Number of the tributary SET CLK(Mandator y) Type of the subrack EXP ALMLOG(Opti onal) Sequence ofweight over the local Traffic local alarm records NSVL. When this parameter is set ADD to a larger value, the NS is more NSVLLOCAL( likely to select this IP point Optional) according toweight over the remote Traffic local the load sharing NSVL. When this parameter is set ADD to a larger value, the NS is more NSVLREMOT likely to select this IP point E(Optional) according to the load sharing The parameter specifies which type SET of service TRXs should be BTSPSUFP(O preferentially processed when the ptional) PSU is faulty. ADD Service type of the IP interface BTSABISMUX board. The service type can be CS FLOW(Manda speech, CS data, PS high priority, tory) or PSalow priority. to bad quality After handovr due is successful, the penalty on the SET original serving cell is performed GCELLHOFIT within the "Penalty Time after BQ PEN(Optional) HO": the receive level of the SET CPUTHD(Opti CPU usage alarm clearance onal) threshold alarm threshold. When CPU usage the CPU usage exceeds the SET threshold, a CPU usage alarm is CPUTHD(Opti reported. "CPU occupancy alarm onal) clearance threshold" is smaller DSP usage alarm clearance SET threshold. When the DSP usage is CPUTHD(Opti lower than the threshold, the DSP onal) usage alarm is cleared. SRNO Tributary No. BSC6900 SRT Subrack type BSC6900 SRTORD Sort Order BSC6900 SRVLW User Data Load Weight BSC6900 SRVLW User Data Load Weight BSC6900 SRVPRIPOLICY Service Priority Policy BSC6900 SRVTYPE Service Type BSC6900 SSBQPUNISH Penalty Level after BQ HO BSC6900 CPU occupancy SSCPUAVEUSAGE alarm clearance ALMTHD threshold BSC6900 SSCPUMAXUSAGE CPU occupancy ALMTHD alarm threshold DSP occupancy SSDSPAVEUSAGE alarm clearance ALMTHD threshold BSC6900 BSC6900 SSDSPMAXUSAGE DSP occupancy ALMTHD alarm threshold BSC6900 SSLENSD Filter Length for TCH Level BSC6900 SSLENSI Filter Length for SDCCH Level BSC6900 SSN Subsystem No. BSC6900 DSP usage alarm threshold. When the DSP usage exceeds the SET threshold, a DSP usage alarm is CPUTHD(Opti reported. "DSP occupancy alarm onal) clearance network receives When the threshold" is smaller measurement reports, the SET measurement values in several GCELLCHMG straight measurement reports are AD(Optional) filteredthe reflect the radio operating When to network receives measurement reports, the SET measurement values in several GCELLCHMG straight measurement reports are AD(Optional) filtered to reflect the radio operating STR BKP(Optional) ULD RSTINFO(Ma ndatory) Number of the subsystem ADD No. of the subsystem where the IurGIURGCONN g common connection is (Mandatory) established EXP ALMLOG(Opti Start synchronization number of the onal) alarmthe time advancing handover After record is successful, the penalty on the SET original serving cell is performed GCELLHOFIT within the "Penalty Time after TA PEN(Optional) HO": the receive level of the SET TZ(Mandatory ) Start of DST The operation time of the log record should be after this time. If EXP this parameter is not specified, the LOG(Optional) start time is not limited. If the time mode is set to ADD "DAILY_T", "WEEKLY_T", or SUBTSK(Man "MONTHLY_T", you should set this datory) parameter. The operation time of the log record should be after this time. If COL this parameter is not specified, the LOG(Optional) start time is not limited. EXP ALMLOG(Opti Start time of the alarm record. By onal) default, the start time is 00:00:00. SSN Subsystem No. BSC6900 SSSN Start Sync Serial No. BSC6900 SSTAPUNISH Penalty Level after TA HO BSC6900 ST StartTime BSC6900 ST Start Time BSC6900 ST Start Time BSC6900 ST Start Time BSC6900 ST Start Time BSC6900 ST Start Time BSC6900 STA ALMLOG(Opti Start time of the alarm record. By onal) default, the start time is 00:00:00. ADD GSMSCB(Ma ndatory) EXP ALMLOG(Opti onal) STA ALMLOG(Opti A key parameter that indicates the date and time when the BSC6900 broadcasts cell messages ST Start Time BSC6900 STARTAID Start Alarm ID BSC6900 STARTCBSHORTM Prefer Variable SGFLOWCTRL Bitmap Code BSC6900 Start number of the alarm record Whether to preferentially use the SET variable bitmap code when BSCFCPARA( encoding the FH frequency in the Optional) assignment or handover command SET This parameter indicates whether BSCFCPARA( the arrival of channel request Optional) messages is controlled. of the A It indicates the start CIC interface CIC segment. When BLK operation mode is set to OPC ACIC(Mandat index, DPC group index, BSC ID, ory) orindicates the start CIC of the Pb It CIC, the parameter is interface CIC segment. If the BLK search object mode is set to PBCIC(Manda search by the specified range, the tory) parameter is mandatory. ADD This parameter specifies the start BSCDSTPAD date of a period during which the ATE(Mandator TRX Intelligent Shutdown feature is y) disabled. environment When the temperature reaches the specified SET value of this parameter, the heater BTSDHEUBP( is started. Optional) In multi-mode scenario, the value ADD This parameter specifies the start BSCDSTPAD month of a period during which the ATE(Mandator TRX Intelligent Shutdown feature is y) disabled. SET This parameter indicates whether BSCFCPARA( the arrival of paging messages are Optional) controlled. SET This parameter indicates whether BSCFCPARA( the arrival of PS resource request Optional) messages is controlled. STARTCHREQARRI CHAN REQ VALCTRL Arrival Control BSC6900 STARTCIC Start CIC BSC6900 STARTCIC Start CIC BSC6900 StartDayDSTPA Prohibit Close TRX Start Day BSC6900 STARTHEATTEMP Heater Startup Temperature BSC6900 StartMonthDSTPA Prohibit Close TRX Start Month BSC6900 STARTPGARRIVAL Paging Arrival CTRL Control PS Resource STARTPSRESREQ REQ Arrival ARRIVALCTRL Control BSC6900 BSC6900 STARTSUBTS Start Sub Timeslot No. BSC6900 STARTTIME Fallback Start Time BSC6900 Time When the StartTimeTACloseTr Function Is xPA Enabled BSC6900 SET BTSFORBIDT S(Optional) Number of the startBTS waits to Time for which the sub-timeslot start the fallback function after the SET OML is interrupted. With this BTSFALLBAC parameter, the BTS does not start K(Optional) the fallback function when the OML This parameter specifies the start SET time for dynamically enabling the BSCDSTPA(O TRX Intelligent Shutdown feature ptional) each day. BLK ATERE1T1(M It indicates the start CIC of the Ater andatory) interface CIC segment. of the A It indicates the start CIC interface CIC segment. When BLK Operation mode is set to subrack AE1T1(Manda number, slot number, port number, tory) or CIC, the parameter is SET BTSFORBIDT S(Mandatory) Number of the startthe smart Whether to enable timeslot temperature control mechanism of SET the FMUA. Smart temperature BTSFMUABP( control refers to the mechanism Optional) adopted by the FMUA to adjust the Whether to enable the smart temperature control mechanism of SET the NFCB. Smart temperature BTSNFCBBP( control refers to the mechanism Optional) adopted of the start CIC. adjust the Number by the NFCB to The C/C of each E1/T1 timeslot can be ADD calculated on the basis of this AE1T1(Manda parameter. Assume that the start tory) CIC is 100, the CIC of the E1 ADD BTSMONITO Number of the cabinet where the RTS(Optional) outgoing port of the BTS is located ADD OP(Mandatory Start date. The input format is ) YYYY&MM&DD. Number of frequencies measured STR in each group (excluding the NCS(Mandato frequencies in the original BA ry) table). STARTTS Start TS BSC6900 STARTTS Start TS BSC6900 STARTTS Start Timeslot No. Smart Temperature Control Smart Temperature Control BSC6900 STC BSC6900 STC BSC6900 STCIC Start CIC BSC6900 STCN Out Port Cabinet No. BSC6900 STD Start Date BSC6900 STEP Measurement Step BSC6900 STFLG Satellite flag BSC6900 ADD MTP3LNK(Opt ional) Satellite flag STR BTSLOG(Opti onal) Start time SET GCELLSOFT( Whether to enable the EICC Optional) algorithm This parameter specifies whether the sending of system information SET 5, 5bis, and 5ter can be stopped on GCELLSOFT( the SACCH on the SDCCH after Optional) the BTS issues the BTS waits to Time for which a ciphering stop the fallback function after the SET OML is set up. With this parameter, BTSFALLBAC the BTS does not stop the fallback K(Optional) function when the OML is set up ADD N7DPC(Optio nal) ADD BTSMONITO RTS(Mandator y) SET GCELLFREQ SCAN(Option al) Whether to enable the signaling point with the signaling transfer function Number of the outgoing port of the BTS where the monitoring timeslot is located STIME Start Time BSC6900 STIRCALLOWED EICC Allowed Stop Send SI 5/5bis/5ter after Encrypt BSC6900 STOPSI5SWITCH BSC6900 STOPTIME Fallback Stop Time BSC6900 STP STP function switch BSC6900 STPN Out-BTS Port No. BSC6900 STRTM Start Time BSC6900 Start time of frequency scanning STSN Out Port Slot No. BSC6900 ADD BTSMONITO Number of the slot where the RTS(Optional) outgoing port of the BTS is located ADD BTSMONITO RTS(Optional) ADD BTSMONITO RTS(Mandator y) STSRN Out Port Subrack No. BSC6900 Number of the subrack where the outgoing port of the BTS is located STSUBTS Out-BTS Sub Timeslot No. BSC6900 Number of the sub-timeslot on the outgoing port of the BTS STT Start Time BSC6900 ADD OP(Mandatory Start time. The input format is ) HH&MM&SS. STTS Out-BTS Timeslot No. BSC6900 STTYPE BTS Type BSC6900 ADD BTSMONITO RTS(Mandator Number of the timeslot on the y) outgoing port of the BTS SET BTSAUTODL DACTINFO(O ptional) Type of the BTS. BLK ID of the BSC in the TC pool where ACIC(Mandat an A interface circuit is blocked or ory) unblocked ADD ID of the BSC in the TC pool to AE1T1(Manda which an A interface E1/T1 is tory) added STR Command string that is BTSLOG(Opti transparently transmitted to the onal) BTS Maximum sub-frame length. This parameter indicates the maximum ADD sub-frame length for multiplexing. If IPMUX(Option the length of a sub-frame exceeds al) this value, sub-frame length. The Maximum the sub-frame is not ADD data stream to be multiplexed on BTSABISMUX the same multiplexing channel FLOW(Option must be of the same type, and the al) length of the packet before ADD SUBTSK(Man datory) ADD SUBCMD(Ma Number of the scheduled subtask SET SUBNET(Man datory) subnet No. in a BSC. SET GCELLSOFT( Optional) SET BTSFLEXABI SPARA(Optio nal) SET BTSOMLTS( Mandatory) This parameter specifies whether the CS services preempt the sublink resources of PS services. Whether to allow the CS services to preempt the sublink resources of PS services when the Abis resources are congested SUBBSCTID ID of slave BSC in TC Pool BSC6900 SUBBSCTID ID of slave BSC in TC Pool BSC6900 SUBCMD Command Parameter BSC6900 SUBFRAMELEN Max subframe length[byte] BSC6900 Max Subframe SUBFRAMETHRES Length BSC6900 SUBID Subtask ID BSC6900 SUBNET Subnet No. Sublink Resources SUBRESPREEMPT Preemption FLG Switch BSC6900 BSC6900 SUBRESPREEMPT Sub Res Preempt FLG Flag BSC6900 SUBTS Sub Timeslot No. BSC6900 Number of the sub-timeslot on the port SubVer Sub-Version No.of TMU BSC6900 SupportApplyUsedCi Support Apply c Used A Cic BSC6900 SET BTSAUTODL Sub-version No. of the TMU board. DACTINFO(M It is configured according to the andatory) actual situation. circuits in use on Whether the CIC the A interface can be assigned. SET When this parameter is set to YES OTHSOFTPA and the MSC assigns new calls to RA(Optional) an ongoing A interface circuit, the SUPPORTBAKCLK2 Use Back-up port SRC for LINE2 BSC6900 SET Whether to use Back-up port for CLK(Optional) LINE2 SUPPORTBAKCLKS Use Back-up port RC for LINE1 BSC6900 SET Whether to use Back-up port for CLK(Optional) LINE1 SET GCELLSBC(O ptional) SET BSCPSSOFT PARA(Optiona l) SUPPORTCELLBR OADCAST Support Cell Broadcast Name BSC6900 Whether to support the broadcast of the cell name SUPPORTDL5TS Support High Multislot Class BSC6900 SUPPORTDTM Support DTM BSC6900 SUPPORTEDA Support EDA BSC6900 SUPPORTENDTM Support Enhanced DTM BSC6900 Whether to support the high multislot class Whether to support dual transfer mode (DTM). The DTM allows an SET MS to use the circuit switching GCELLGPRS( service and the packet switching Optional) service at the same time. This SET BSCPSSOFT PARA(Optiona l) Whether to support EDA the enhanced DTM function. Comparing to the SET DTM, the enhanced DTM improves GCELLGPRS( the CS setup and release. During Optional) the CS service setup, the PS SET BSSLS(Option Whether the FE/GE BTS supports al) inter-BTS local switching to Support intracell handover change the active speech version, SET then can increase the usage of BSCBASIC(O TFO(Tandem Free Operation) to ptional) improve thesupport the cell list in Whether to speech quality. the common measurement ADD messages over the Iur-g interface. GNRNC(Optio When this parameter is set to YES, nal) the local BSC can handle the load Support FE/GE SupportIpSpanBtsLS SPAN BTS Local witch Switch BSC6900 SupportTFOCodecO Support TFO ptimize Codec Optimize BSC6900 SupptCellList SupptCellList BSC6900 SVALUE S Value BSC6900 Minimum timeslots between two successive channel requests. After SET sending the access request, if the GCELLPRAC MS does not receive the response H(Optional) message after waiting for the ADD Server IP address used on the NSE(Mandato SGSN side in the IP subnet ry) dynamic configuration procedure ADD Server UDP port number used on NSE(Mandato the SGSN side in the IP subnet ry) dynamic configuration procedure SET ALMPORT(Op Operating state of the environment tional) alarm parameter is set to "ON", you If this port must set "OMU automatic SET switchover interval". Otherwise, ASWPARA(M "OMU automatic switchover andatory) interval" isauthenticating objects. switch for not displayed. When the switch is enabled, the SET BSC system authenticates the BTS OBJAUTHSW objects of the user; when the (Mandatory) switch is disabled, the BSC system SET BTSENVALM PORT(Mandat ory) Whether to enable the alarm port SET TZ(Mandatory ) Weekday on which DST starts SET SCUPORT(M andatory) State of the panel port switch SET SLFSLVSW(M andatory) Switch for the OMU self-healing SET Grace Protection Period Switch LICENSECTR determines whether to enter the L(Mandatory) grace protection period. SET BFDPROTOS Turn on or turn off the BFD W(Mandatory) protocol switch SVRIP Server IP BSC6900 SVRPORT Server UDP Port BSC6900 SW Switch OMU Automatic Switchover Switch BSC6900 SW BSC6900 SW Switch BSC6900 SW Switch BSC6900 SWEEK Start week BSC6900 Switch Port switch BSC6900 SWITCH Self-healing Switch BSC6900 SWITCH Grace Protection Period Switch BSC6900 SWITCH Bfd Protocol Switch BSC6900 SWITCH Alarm Parameter Configuration Enabled BSC6900 Whether to enable the board parameters to be configured. If this SET parameter is set to "YES", the user BTSALMPOR can set board parameters of the T(Mandatory) BTS. Otherwise, the user cannot SET BTSETHPOR Whether to enable the 3ah function T(Optional) on the BTS port. ADD The field indicates whether the SCTPLNK(Opt primary path can be switched back ional) when it is available. The association is smoothly ADD switched over to the primary path SCTPLNK(Opt after the number of heartbeat ional) responses is received. SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter1 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter10 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter2 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter3 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter4 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter5 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter6 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter7 SWITCH3AH 3ah Switch BSC6900 Switch primary IP SWITCHBACKFLAG address flag BSC6900 SWITCHBACKHBN Switch back HB UM number BSC6900 SwitchParameter1 SwitchParameter 1 BSC6900 SwitchParameter10 SwitchParameter 10 BSC6900 SwitchParameter2 SwitchParameter 2 BSC6900 SwitchParameter3 SwitchParameter 3 BSC6900 SwitchParameter4 SwitchParameter 4 BSC6900 SwitchParameter5 SwitchParameter 5 BSC6900 SwitchParameter6 SwitchParameter 6 BSC6900 SwitchParameter7 SwitchParameter 7 BSC6900 SwitchParameter8 SwitchParameter 8 BSC6900 SwitchParameter9 SwitchParameter 9 BSC6900 SWITCHPORTNO Switch Port BSC6900 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter8 SET SS7PATCHS WITCH(Optio nal) Set patch switch parameter9 Number of the switching port. If ADD "Link Attribute" is set to "BBU", the BTSSFPMOD switching port must be configured. E(Optional) The value ranges from 3 to 5. SET OPSW(Manda Whether to enable the local user tory) management function SET TZ(Mandatory ) Sequence of the the BTS set DST Symbol offset of start week of manually. After the offset SET information of the BTS is collected, BTSAISS(Opti the symbol offset is adjusted. onal) Adjustment value = Collected Synchronization status. This parameter is used to identify ADD different 3G cells. This parameter GEXT3GCEL should be same with the L(Mandatory) configuration of 3G cells. Site synchronization method. AISS stands for the air-interface soft SET synchronization method, and GPS BTSOTHPAR stands for the GPS synchronization A(Optional) method. CMP BRDAREA(Op tional) Automatic synchronization flag SET BTSIPCLKPA RA(Mandatory Synchronization mode of the IP ) clock Interim synchronization period (in SET days). The BTS can re-initiate the BTSIPCLKPA synchronization only after the RA(Optional) period. Interim synchronization period (in SET hours). The BTS can re-initiate the BTSIPCLKPA synchronization only after the RA(Optional) period. SWOP Set Enable/Disable BSC6900 SWSEQ Start week sequence BSC6900 SYMOFFSET BTS Symbol Offset BSC6900 SYNCCASE Sync case Site Synchronization Method BSC6900 SYNCMETHOD BSC6900 SYNFLAG Synchronization flag. Clock Synchronization Mode BSC6900 SYNMODE BSC6900 SYNTIMEDAY Days of Inter Sync Period BSC6900 SYNTIMEHOUR Hours of Inter Sync Period BSC6900 SYNTIMEMIN Minutes of Inter Sync Period BSC6900 Interim synchronization period (in SET minutes). The BTS can re-initiate BTSIPCLKPA the synchronization only after the RA(Optional) period. SYSCONTACT Contact mode of the manufacturer BSC6900 SET Contact way of the Base Station SYS(Optional) Controller supplier SYSDESC System description System Flux Threshold for Load HO BSC6900 SYSFLOWLEV BSC6900 SET Description of the Base Station SYS(Optional) Controller flux level is the current The system flux control level of the system. A SET load handover is allowed only when GCELLHOAD( the system flux is lower than the Optional) value of this parameter. SYSLOCATION System Location BSC6900 Send System Message 10 Allow SET Location of the Base Station SYS(Optional) Controller SET Whether sending the system BSCBASIC(O information type 10 message on ptional) the VGCS/VBS TCH is allowed SysMsg10Allowed BSC6900 SYSOBJECTID NE Name BSC6900 SET Name of the Base Station SYS(Optional) Controller of Network Element SYSSERVICES System services BSC6900 SET Services provided by the Base SYS(Optional) Station Controller SET Timer T1, specifying the duration of BSSGPPARA( monitoring the BVC blocking Optional) (unblocking) procedure. CHG BTSPTUSHK Value of the first timer for the PTU TM(Optional) handshake When the reception of a TFP SET causes unavailability of a route, this MTP3TMR(Op timer is started to regularly check tional) whether the route is recovered. This timer is a protection timer waiting for an uninhibit SET acknowledgement message (LUA) MTP3TMR(Op from the peer end after an uninhibit tional) message (LUN) is sent to the peer T1 T1 BSC6900 T1 Time1 BSC6900 T10TMR Signalling route set test timer BSC6900 T12TMR Uninhibit ACK timer BSC6900 T13TMR Force uninhibit timer BSC6900 SET MTP3TMR(Op tional) SET MTP3TMR(Op tional) SET MTP3TMR(Op tional) SET MTP3TMR(Op tional) T14TMR Inhibition ACK timer BSC6900 T17TMR Link realignment timer BSC6900 T1TMR Time-control changeover timer BSC6900 This timer is a protection timer waiting for a force uninhibit acknowledgement message (LUA) from the peer end after a force uninhibit message (LFU) is sent to This timer is a protection timer waiting for an inhibition acknowledgement message (LIA) from the peer end after an inhibition message (LIN) is sent to This timer is started when a link fails to be started. The restart of the link is initiated after this timer expires. normal changeover cannot When a be initiated, services will be changed over to an alternative link after this timer expires to avoid disorder of data. T2 T2 BSC6900 SET Timer T2, specifying the duration of BSSGPPARA( monitoring the procedure of Optional) resetting SIG BVC and PTP BVC. CHG BTSPTUSHK Value of the second timer for the TM(Optional) PTU handshake protocol. The Timer in the LAPD value of the timer indicates the time SET when the LAPD link waits for the BTSRINGATT response or acknowledgement R(Optional) frame after sending the command This parameter specifies the expiry value of timer T200 used for the SET FACCH/TCHF over the Um GCELLCCTM interface. For the function of timer R(Optional) T200parameter specifies the expiry This and the effect of the value of timer T200 used for the SET FACCH/TCHH over the Um GCELLCCTM interface. For the function of timer R(Optional) T200parameter specifies the expiry This and the effect of the value of timer T200 used for the SET SACCH over the Um interface GCELLCCTM when the TCH supports SAPI3 R(Optional) services. For the function thetimer This parameter specifies of expiry value of timer T200 used for the SET SACCH on the SDCCH. GCELLCCTM For the function of timer T200 and R(Optional) the effect of the specifies the expiry This parameter parameter, see the value of timer T200 used for the SET SACCH over the Um interface GCELLCCTM when the TCH supports SAPI0 R(Optional) services. For the function of timer T2 Time2 BSC6900 T200 T200 BSC6900 T200FACCHF T200 FACCH/F BSC6900 T200FACCHH T200 FACCH/H BSC6900 T200SACCH3 T200 SACCH TCH SAPI3 BSC6900 T200SACCHS T200 SACCH SDCCH BSC6900 T200SACCT0 T200 SACCH TCH SAPI0 BSC6900 T200SDCCH T200 SDCCH BSC6900 SET GCELLCCTM R(Optional) SET GCELLCCTM R(Optional) SET BTSRINGATT R(Optional) SET MTP3TMR(Op tional) SET MTP3TMR(Op tional) SET MTP3TMR(Op tional) SET BSSGPPARA( Optional) T200SDCCH3 T200 SDCCH SAPI3 BSC6900 T203 T203 BSC6900 T22TMR Local inhibit test timer BSC6900 T23TMR Remote inhibit test timer BSC6900 T2TMR Changeover ACK timer BSC6900 T3 T3 BSC6900 This parameter specifies the timeout value of timer T200 used for the SDCCH over the Um interface. T200parameterthe data link layer This prevents specifies the expiry value of timer T200 when the SDCCH supports SAPI3 services. For the function of timer T200 and the effect of the parameter, see the Timer in the LAPD protocol. The value of the timer indicates the maximum duration for no frame exchange in the LAPD link. After a local link is inhibited, this timer is started to regularly check the management states at both ends of the link. After a remote link is inhibited, this timer is started to regularly check the management states at both endstimer islink. This of the a protection timer waiting for an extended changeover acknowledgement message (XCA) from the peer end after an extended changeover Timer T3. T3 is started after the message SUSPEND is received on the BSC side. T3 is stopped after the message SUSPEND ACK is received. T3 Time3 BSC6900 T3105 T3105 BSC6900 CHG BTSPTUSHK Value of the third timer for the PTU TM(Optional) handshake When the BTS sends physical information to the MS, the BTS SET starts the timer T3105.If the timer GCELLHOAD( T3105 expires before the BTS Optional) receives the SAMB frame from MS, SET GCELLGSMR Timer for retransmitting the VGCS (Optional) UPLINK GRANT set the maximum T3168 is used to message duration for the MS to wait for the SET uplink assignment message. After GCELLPSBA the MS originates the uplink TBF SE(Optional) setup request by sendingTBF after Duration of releasing the the the MS receives the last data SET block. When the MS receives the GCELLPSBA RLC data block containing the flag SE(Optional) identifying the last data block and T3115 T3115 BSC6900 T3168 T3168 BSC6900 T3192 T3192 BSC6900 T3212 T3212 BSC6900 SET GCELLIDLEB This parameter specifies the length ASIC(Optional of the timer for periodic location ) update. Timer on the DTE side, specifying the duration of acknowledging the sending link integrity. When a normal changeback cannot be initiated, services will be changed back to a normal link only after this timer expires to avoid disorder ofT3 is started after the Timer T4. data. message v is received on the BSC side. T4 is stopped after the message RESUME ACK is received. is a protection timer This timer waiting for a changeback acknowledgement message (CBA) from the peer end after the first changeback declaration (CBD) is Timer T5. When the downlink TBF is set up, if the BSC side does not receive the valid RACAP, the BSC originates the radio access capability update flow and the timer This timer is a protection timer waiting for a changeback acknowledgement message (CBA) from the peer end after the second changeback declaration (CBD) is Timer T6. The BSC sends the SGSN request to download the BSS PFC. When the QoS parameter is obtained, the timer is started. After the message the Timer T8. The BSC sends SGSN request to download the BSS PFC. When the QoS parameter is obtained, the timer is started. Afterstarted when a This timer is the message transmission prohibited message (TFP) is sent. The TFP will not be sent any more during the running of this timer. network receives When the measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating T391 Parameter of DTE [T391] BSC6900 ADD BC(Optional) SET MTP3TMR(Op tional) SET BSSGPPARA( Optional) SET MTP3TMR(Op tional) SET BSSGPPARA( Optional) SET MTP3TMR(Op tional) SET BSSGPPARA( Optional) SET BSSGPPARA( Optional) SET MTP3TMR(Op tional) SET GCELLHOFIT PEN(Optional) T3TMR Time-control changeback timer BSC6900 T4 T4 BSC6900 T4TMR Changeover ACK first attempt timer BSC6900 T5 T5 BSC6900 T5TMR Changeover ACK second attempt timer BSC6900 T6 T6 BSC6900 T8 T8 Transmission prohibited inhibition timer BSC6900 T8TMR BSC6900 TAFLTLEN Filter Length for TA BSC6900 TAFORUOHOALLO TA for UO HO W Allowed BSC6900 SET Whether the TA is used as a GCELLHOIUO decisive condition for the (Optional) concentric cell handover TAHOEN TA HO Allowed BSC6900 SET GCELLHOBA SIC(Optional) SET GCELLHOIUO (Optional) ADD G2GNCELL(O ptional) SET GCELLHOEM G(Optional) SET GCELLGSMR (Optional) SET GCELLHOFIT PEN(Optional) ADD AISSCFG(Ma ndatory) ADD NCELL(Mand ADD G2GNCELL(O ptional) SET GCELLHOIUO (Optional) SET GCELLPSPW PARA(Optiona l) SET GCELLPSPW PARA(Optiona l) EXP DEVFILE(Opti onal) TAHYST TA Hysteresis BSC6900 TALASTTIME TA HO Valid Time BSC6900 TALIMIT TA Threshold BSC6900 TALKERINFINT Talker Info Interval BSC6900 TASIGSTRFLTLEN TA Filter Length for SDCCH Level BSC6900 Whether to enable the time advance (TA) handover. The TA handover determines whether the timing advance (TA) is higher than the predefined TA threshold. When One of the parameters that determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric Allowed" criterion must be met for The P/N is set to OFF, "TA triggering a TA handover. That is, the TA handover can be triggered only if P measurement reports among N measurement reports An emergency handover is triggered when TA is greater than or equal to the value of this parameter. This parameter specifies the interval of broadcasting the speech data of the talker on the downlink group call channel that is controlled by the the network receives When BTS. When the parameter is measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating Unique identifier of the Um interface software synchronization task P/N criterion must be met for The triggering a TA handover. That is, the TA handover can be triggered only if P measurement reports among the parameters that One of N measurement reports determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric Allowed" is set the signal strength Filter period of to OFF, "TA in the packet transmission mode of the MS. In the packet transmission mode, the signal level filter parameter ofof the signal strength Filter period the filter period of the in the packet idle mode of the MS. In the packet idle mode, the signal level filter parameter of the filter period ofof the output segment Number the signal strength for 1: Segment 1 describes the basic information of the equipment. 2: Segment 2 describes the connection information. TASKIDX AISS Task Index BSC6900 TASTATTIME TA HO Watch Time BSC6900 TATHRES TA Threshold BSC6900 TAVGT T_AVG_T BSC6900 TAVGW T_AVG_W BSC6900 TB Output Segment No. BSC6900 TB Output Segment No. BSC6900 EXP BTSDEVFILE( Optional) SET BTSOMLBAC KUP(Optional) SET BTSRINGATT R(Optional) ADD MTP3LNK(Opt ional) SET BSSGPPARA( Optional) SET BTSAPMUBP( Optional) SET BSCBASIC(O ptional) SET GTRXDEV(Op tional) SET GCELLCHMG AD(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) TBS Try Switching Duration Time BSC6900 TBS Ring I Try Rotating Duration Time BSC6900 TC Test code BSC6900 TC Tc Temperature Compensation Coefficient BSC6900 TCC BSC6900 TCCRCAllowed TC CRC Allowed BSC6900 TCHAJFLAG TCH Rate Adjust Allow BSC6900 TCHBUSYTHRES TCH Traffic Busy Threshold BSC6900 DL FER TCHDROPSTATDLF Threshold for ER TCH Call Drop DL Level TCHDROPSTATDLL Threshold for EV TCH Call Drop DL Quality TCHDROPSTATDL Threshold for QUAL TCH Call Drop BSC6900 BSC6900 BSC6900 Output Segment No. 1: Segment 1 describes the basic information of the equipment. 2: Segment 2 describes the connectiontime in which the BTS Maximum information. attempts to set up the OML after swapping the main and backup OMLs. If the BTS fails to set up the OMLBTS repeatedly attempts to The within this time, the BTS connect to port 0 or port 1 after the switchover. If the connection on one port fails within the time specified by this parameter, the Test code for the MTP3 link. After the successful test, the link can be used for carrying signaling services. If the test fails, the MTP3 periodically sends the fault locating Timer Tc, specifying the interval for the BVC and MS to send flow control messages. When this parameter is set to a smaller value, the BVC and the MS send flow Temperature compensation coefficient. This parameter defines the charging voltage increase or decrease unit of each battery when the ambient temperature of the This parameter specifies the cyclic redundancy check (CRC) switch, which can be set to On or Off. The value of this parameter determines whether check is performed on the Whether to allow the cell to dynamically change a channel from full rate to half rate or from half rate to full rate. If this parameter is set tothe current channel seizure ratio If YES, the conversion is allowed; reaches or exceeds this value, the half-rate TCH is assigned preferentially; otherwise, the fullrate TCH is assigned preferentially. When a call drops on the TCH, the corresponding TCH call drop counter is incremented by one if the DL FER carried in the last MR is greater than the on theof this the When a call drops value TCH, corresponding TCH call drop counter is incremented by one if the downlink level carried in the last MR is lower than the value of this When a call drops on the TCH, the corresponding TCH call drop counter is incremented by one if the downlink quality carried in the last MR is greater than the value of UL FER TCHDROPSTATULF Threshold for ER TCH Call Drop UL Level TCHDROPSTATULL Threshold for EV TCH Call Drop UL Quality TCHDROPSTATUL Threshold for QUAL TCH Call Drop BSC6900 SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLOTHE XT(Optional) SET GCELLHOCT RL(Optional) BSC6900 BSC6900 TCHHOMININTV Min Interval for TCH Hos BSC6900 When a call drops on the TCH, the corresponding TCH call drop counter is incremented by one if the UL FER carried in the last MR is greater than the on theof this the When a call drops value TCH, corresponding TCH call drop counter is incremented by one if the uplink level carried in the last MR is lower than the value of this When a call drops on the TCH, the corresponding TCH call drop counter is incremented by one if the uplink quality carried in the last MR isagreater than the value of this After new TCH is assigned to an MS, the MS can be handed over to another channel only if the time during which the MS occupies the TCH is longer than the period TCHMRCUTNUM TchMrCutNum BSC6900 TCHRATEMODIFY TCH Rate Modify BSC6900 SET Maximum number of discarded GCELLPWR3( MRs allowed on the TCH in a Optional) power control period type uses Whether the TCH rate the MSC strategy or BSC strategy. SET When this parameter is set to NO OTHSOFTPA and the MSC policy is used, the RA(Optional) BSC preferentially selects full-rate SET This parameter specifies the GCELLSOFT( interval at which the speech service Optional) on a TCH is handed over. This parameter specifies whether SET to perform periodic intra-cell GCELLSOFT( handover for speech services on Optional) TCH. Threshold for determining that the underlaid subcell is busy. The BSC SET assigns channels in the underlaid GCELLCHMG subcell to the MS in a concentric AD(Optional) cell. BSC assigns Rate Selection The When "Allow channels in the overlaid subcell to the MS in a SET concentric cell. If the channel GCELLCHMG seizure ratio of overlaid subcell is AD(Optional) greater than the value of this ADD MTP3LNK(Opt Test code length of the signaling ional) link. By default, the value is 10. ADD MTP3LNK(Ma ndatory) Mode of TC TCHTIMEHOPERIO TCH Time D Handover Period BSC6900 TCHTIMEHOSWITC TCH Time H Handover Switch BSC6900 Tch Traffic Busy TCHTRIBUSYUNDE Underlay RLAYTHR Threshold Tch Traffic Busy TCHTRICBUSYOVE Overlay RLAYTHR Threshold BSC6900 BSC6900 TCLEN Test code length BSC6900 TCMODE TC mode BSC6900 TCMUTEDETECTFL Mute Detect AG Class1 Switch BSC6900 TCN Tail Cabinet No. BSC6900 TCPN TC Port No BSC6900 SET GCELLSOFT( Optional) ADD BTSRXUCHAI N(Mandatory) CBN BTSRXUCHAI ADD ATERCONPA TH(Mandatory ) Whether to enable the class-1 mute detection. Number of the cabinet where the main board of the RXU ring is located TCPOOLID TC Pool ID BSC6900 TCSN TC Slot No BSC6900 TCSRN TC Subrack No BSC6900 TCTYPE The type of TC resource BSC6900 TDDBA1TAG TDD BA1 Input Tag BSC6900 TDDBA2TAG TDDBA2 Input Tag BSC6900 TDDCELLOFF TDD Reporting Offset BSC6900 TDD Cell TDDCELLRESELDI Reselect V Diversity BSC6900 TDDCELLTHRED TDD Reporting Threshold BSC6900 Number of the TC port where one end of the ATER connection channel is located pool function If you enable the TC when configuring the basic SET information of the BSC6900, you BSCBASIC(M need to enter the TC Pool ID. The andatory) ID must be unique in the entire ADD ATERCONPA Number of the TC slot where one TH(Mandatory end of the ATER connection ) channel is located ADD ATERCONPA Number of the TC subrack where TH(Mandatory one end of the ATER connection ) channel is located The type of TC resource GTC: TC resources that support SET normal voice coding/decoding and TCTYPE(Man packet conversion datory) UTC: mode of the BA table. In auto Input TC resources that support SET mode, the system fills in the BA1 GCELLIDLET and BA2 tables based on the DDBA1(Mand adjacent relation of cells. In manual atory) mode, the user maintains the BA SET Whether the FDD BA2 table is GCELLHOTD generated automatically according DBA2(Mandat to the neighboring relation or typed ory) manually. priority of a TDD cell is When the SET ranked, the value of this parameter GCELLCCUT is added to the receive level of the RANSYS(Opti TDD cell in the measurement onal) report. cell can become a A TDD SET candidate cell only when the GCELLCCUT average receive level of the TDD RANSYS(Opti cell is greater than the TDD Cell onal) Reselect Diversity of the serving Threshold for determining whether SET the MR about a TDD cell is valid. GCELLCCUT The measurement report is valid if RANSYS(Opti the receive level of the TDD cell in onal) the measurement report is greater TDDDIVERSITY Diversity BSC6900 TDDDLUARFAN DL UARFAN BSC6900 TDD MI System TDDMIOPTIMIZEDA Information LLOWED Optimized TDD MI System INFO Broadcasting TDDMIPROHIBIT Prohibit BSC6900 BSC6900 SET GCELLIDLET DDBA1(Mand atory) SET GCELLIDLET DDBA1(Mand atory) SET GCELLCCUT RANSYS(Opti onal) SET GCELLCCUT RANSYS(Opti onal) ADD GEXT3GCEL L(Optional) SET GCELLIDLET DDBA1(Mand atory) SET GCELLHOTD DBA2(Mandat ory) SET GCELLCCUT RANSYS(Opti onal) SET GCELLIDLET DDBA1(Mand atory) SET This parameter specifies whether to activate the diversity mode on the common channel of a 3G cell.1 Downlink frequency of frequency in table 3GBA2. This parameter indicates the detected downlink frequency in the 3G adjacent cell list in speech. The parameter is This parameter specifies whether the TDD MI system information optimized function is enabled. This parameter determines whether the broadcasting of the MI system information is prohibited. TDDRSCPQUALTH PS TDD RSCP RSH Quality Threshold BSC6900 TDDSCRAMBLE Cell Parameter ID BSC6900 Cell Parameter ID TDD System Information TDDSIOPTIMIZEDA Optimized LLOWED Allowed TDDSCRAMBLE BSC6900 BSC6900 TDDSYNCCASE Sync Case BSC6900 TDMCONGCLRTH Congestion clear remain ratio BSC6900 TDMCONGTH Congestion remain ratio BSC6900 TDMN1 Subrack 1 TDM Port No BSC6900 Minimum RSCP quality threshold that the TDD 3G candidate cell must cell parameter ID. The ID is TDD reach used to distinguish terminals or cells. This parameter is used after spread spectrum. Therefore, it doesparameter IDthe a TDD cell.of Cell not change of bandwidth The cell parameter ID distinguishes between MSs or cells. It is used after spread spectrum. Therefore, it distinguishes between the signals This parameter determines whether the TDD system information optimized function is enabled. in the TDDBA1 table. SyncCase This parameter determines the synchronization status. Value 0 indicates Sync case 1 and value 1 indicates Sync case 2. This If the ratio of available TDM ADD bandwidth is greater than this TRMLOADTH value, congestion control is (Optional) stopped. If the ratio of available TDM ADD bandwidth is less than or equal to TRMLOADTH this value, congestion control is (Optional) triggered. Each subrack has six TDM port numbers, ranging from 0 to 5. ADD Subrack 1 TDM Port No. refers to SRCONPATH the TDM port number on subrack 1 (Mandatory) of the inter-subrack connection.. TDMN2 Subrack 2 TDM Port No BSC6900 Each subrack has six TDM numbers, ranging from 0 to 5. ADD Subrack 2 TDM Port No. refers to SRCONPATH the TDM number on subrack 2 of (Mandatory) the inter-subrack connection. ADD PBSL(Optiona Terminal endpoint ID of the Pb l) signaling link ADD EMU(Optional ) Temperature alarm switch ADD EMU(Optional ) Upper limit of temperature ADD EMU(Optional ) Lower the environment When limit of temperature temperature of the APMU is SET greater than the value of this BTSAPMUBP( parameter, the BTS reports an Optional) alarm. the environment the nonWhen For the APMU of temperature is greater than the SET value of this parameter, the BTS BTSDPMUBP( reports an alarm. Optional) In multi-mode scenario, the value When the environment temperature of the APMU is less SET than the value of this parameter, BTSAPMUBP( the BTS reports an alarm. For the Optional) APMU thethe non-EPS4815 type, When of environment temperature is less than the value SET of this parameter, the BTS reports BTSDPMUBP( an alarm. Optional) In multi-mode scenario, the value Change value of the floating charge voltage of the storage battery when SET the temperature of the storage BTSDPMUBP( battery changes by 1 degree Optional) Celsius. SAV GCELLTEMP LATE(Optional ) Description of a cell template. EXP This parameter specifies the index GCELLTEMP number of a cell template. Each LATE(Mandat template is numbered uniquely in a ory) BSC6900. TEI TEI Enable Temperature Alarm Reporting Upper Limit of Temperature Alarm Lower Limit of Temperature Alarm BSC6900 TEMP_MASK BSC6900 TEMP_THD_HIGH BSC6900 TEMP_THD_LOW BSC6900 TEMPALARMTHRE Upper ENV SHOLDH TEMP Alarm BSC6900 TEMPALARMTHRE Upper ENV SHOLDH TEMP Alarm BSC6900 TEMPALARMTHRE Lower ENV SHOLDL TEMP Alarm BSC6900 TEMPALARMTHRE Lower ENV SHOLDL TEMP Alarm Coefficient of TEMPCOMPENSAT Temp ECOEF Compensation BSC6900 BSC6900 TEMPLATEDESC Cell Template Description BSC6900 TEMPLATEID Cell Template Index BSC6900 TEMPLATEID Cell Template Index BSC6900 TEMPLATENAME Cell Template Name BSC6900 SAV GCELLTEMP LATE(Optional ) ADD GCELL(Option al) ADD BTSAUTOPL This parameter specifies the index number of a cell template. Each template is numbered uniquely in a BSC6900. Temp Of High TEMPOFHIGHTEM Temp. Load PLOADPWROFF Power Off BSC6900 Low Temperature TEMPOFLOWTEMP Start Load Power LOADPWROFF Off Temp. BSC6900 Low Temperature TEMPOFLOWTEMP Start Load LOADPWROFF Poweroff Temp. BSC6900 TER Indicator of System Information 3 Name of a cell template, uniquely identifying a cell template in a BSC6900. When the temperature of the BTS SET cabinet is greater than the value of BTSAPMUBP( this parameter, the TRX is powered Optional) off. power-off temperature TRX threshold. If the temperature of the SET BTS cabinet is less than the value BTSAPMUBP( of this parameter while "Low Optional) Temperature Startup Allowed" is TRX power-off temperature threshold. If the temperature of the SET BTS cabinet is less than the value BTSDPMUBP( of this parameter while "Low Optional) Temperature Startup Allowed" is SET Whether the System Information OTHSOFTPA Type 3 message carries TER RA(Optional) indication. SET Duration of the timer for starting the BSCNSPARA( IP path status test on the Gb Optional) interface ADD GSMSCB(Ma Content of the cell broadcast ndatory) message important measure to AEC is an improve the speech quality. If the SET AEC works for a consecutive time TCPARA(Opti that is longer than the value of this onal) parameter, the TFO function is In the VSWR test, the TRX STR transmits signals at a default BTSVSWRTS frequency. You can specify the T(Optional) frequency used indicates start This parameter for the test. frame number of the BTS. It is SET used to keep synchronization GCELLOTHE between the BTS and MS after the XT(Optional) BTS is re-initialized. SWP OMUAREA(M andatory) Target OMU TER2INDICATOR BSC6900 TESTTIMER Test Timer BSC6900 TEXT Content of Message BSC6900 TFOOptSwitch TFO Option Switch BSC6900 TFREQ Test Frequency BSC6900 TFRMSTARTTIME Frame Start Time BSC6900 TG Target OMU BSC6900 TGWID TGW ID BSC6900 ADD TGWIP(Mand atory) TGW ID ADD This parameter indicates the TGWIP(Mand address of the operation and atory) maintenance console for TGW. ADD This parameter indicates the mask TGWIP(Mand of the operation and maintenance atory) console for TGW. ADD Slot number of the BSC6900 TGWIP(Mand interface board interworking with atory) TGW. ADD Subrack number of the BSC6900 TGWIP(Mand interface board interworking with atory) TGW. Th. After receiving the MS Timer flow control message, the SGSN SET uses the values of the updated BSSGPPARA( Bmax and R based on the interval Optional) set by this timer. When this Voltage threshold for switching off the air conditioner. If the power SET supply voltage is less than this BTSAIRCON( threshold, the air conditioner needs Optional) to be switched off fordecrease the Voltage threshold to switching on the air conditioner. This parameter SET assumes that the air conditioner is BTSAIRCON( switched off. If the power supply Optional) voltage is greater than thisand Combination of the THP1 ARP1 priority in the Interactive SET service. THP1-ARP1 priority weight GCELLPSCH determines the number of the M(Optional) budget blocks and the block Combination of the THP1 and ARP2 priority in the Interactive SET service. THP1-ARP2 priority weight GCELLPSCH determines the number of the M(Optional) budget blocks and the block Combination of the THP1 and ARP3 priority in the Interactive SET service. THP1-ARP3 priority weight GCELLPSCH determines the number of the M(Optional) budget blocks and the block Combination of the THP2 and ARP1 priority in the Interactive SET service. THP2-ARP1 priority weight GCELLPSCH determines the number of the M(Optional) budget blocks and the block TGWIPOAMIP TGW IP_TRANS IP address BSC6900 TGWIPOAMMASK TGW IP_TRANS IP Mask BSC6900 TGWPEERSN TGW TRANS Slot No. BSC6900 TGWPEERSRN TGW Trans Subrack No. BSC6900 TH Th BSC6900 THDOFF Volt Threshold for Off BSC6900 THDON Volt Threshold for On BSC6900 THP1ARP1PRIWEI GHT THP1-ARP1 Priority Weight BSC6900 THP1ARP2PRIWEI GHT THP1-ARP2 Priority Weight BSC6900 THP1ARP3PRIWEI GHT THP1-ARP3 Priority Weight BSC6900 THP2ARP1PRIWEI GHT THP2-ARP1 Priority Weight BSC6900 THP2ARP2PRIWEI GHT THP2-ARP2 Priority Weight BSC6900 SET GCELLPSCH M(Optional) SET GCELLPSCH M(Optional) SET GCELLPSCH M(Optional) SET GCELLPSCH M(Optional) SET GCELLPSCH M(Optional) THP2ARP3PRIWEI GHT THP2-ARP3 Priority Weight BSC6900 THP3ARP1PRIWEI GHT THP3-ARP1 Priority Weight BSC6900 THP3ARP2PRIWEI GHT THP3-ARP2 Priority Weight BSC6900 THP3ARP3PRIWEI GHT THP3-ARP3 Priority Weight BSC6900 Combination of the THP2 and ARP2 priority in the Interactive service. THP2-ARP2 priority weight determines the number of the budget blocks and the block Combination of the THP2 and ARP3 priority in the Interactive service. THP2-ARP3 priority weight determines the number of the budget blocks and the block Combination of the THP3 and ARP1 priority in the Interactive service. THP3-ARP1 priority weight determines the number of the budget blocks and the block Combination of the THP3 and ARP2 priority in the Interactive service. THP3-ARP2 priority weight determines the number of the budget blocks and the block Combination of the THP3 and ARP3 priority in the Interactive service. THP3-ARP3 priority weight determines the number of the budget blocks and the block THTYPE Threshold type BSC6900 ADD Load balance threshold type. It TRMLOADTH indicates the threshold calculation (Mandatory) mode. SET BSCTMR(Opti onal) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET GCELLHOBA SIC(Optional) SET GCELLHOAD( Optional) SET GCELLHOBA SIC(Optional) This parameter specifies the timer set to wait for a private message from the SGSN.assignment, the During channel assignment of channels on the BCCH TRXs depends on the uplink receive level, quality, and nonBCCH load. The TCHs are the During channel assignment, assignment of channels on the BCCH TRXs depends on the uplink receive level, quality, and nonBCCH load. The TCHs be met for The P/N criterion must are triggering a TIGHT BCCH handover. That is, the TIGHT BCCH handover can be triggered only ifchannel assignment, the uring P seconds among N assignment of channels on the BCCH TRXs depends on the uplink receive level, quality, and nonBCCH load. he TCHs are met for The P/N criterion must be triggering a TIGHTBCCH handover. That is, the TIGHTBCCH handover can be triggered only if P seconds among Receive SGSN TI_WAIT_SGSN_PR Config. Msg. IVATE_MESSAGE Timer Level Thresh for TIGHTBCCHASSMA Assign BCCH INBCCHLEV Under TBCCH BSC6900 BSC6900 Quality Thresh TIGHTBCCHASSMA for Assign BCCH INBCCHQUAL Under TBCCH BSC6900 TIGHTBCCHHOLAS TIGHT BCCH HO TTIME Valid Time BSC6900 Load Threshold TIGHTBCCHHOLOA for TIGHT BCCH DTHRES HO BSC6900 TIGHTBCCHHOSTA TIGHT BCCH HO TTIME Watch Time BSC6900 RX_QUAL TIGHTBCCHRXQUA Threshold for LTHRES TIGHT BCCH HO BSC6900 TIGHTBCCHSWITC TIGHT BCCH H Switch IBCA Tight Trx TIGHTSDCCHRXLE SDCCH Rxlev VTHRED Threshold BSC6900 BSC6900 TIIMSIPAGING IMSI Paging Timer BSC6900 When an intra-cell TIGHT BCCH handover needs to be performed SET (handover from the non-BCCH to GCELLHOAD( BCCH), the downlink receive Optional) quality must be smaller than the SET GCELLCHMG Whether to enable the BCCH BASIC(Option aggressive frequency reuse al) algorithm If the SDCCH load on the TRXs of the compatible BCCH in loose SET frequency reuse pattern is greater GCELLCHMG than the "IBCA Loose Trx SDCCH AD(Optional) Load paging timer. After enabling IMSI Threshold", and when the the MSC pool function, the ADD BSC6900 receives from the MSC GCNOPERAT the paging message attached with OR(Optional) the IMSI. Then, the BSC6900 TIME Time Limit BSC6900 ADD OP(Optional) Whether to limit the operation time of the operator TIME Time BSC6900 TIME Duration BSC6900 Penalty Time TIMEAMRFHPUNIS after AMR TCHFH H HO Fail BSC6900 TIMEBQPUNISH Penalty Time after BQ HO BSC6900 Penalty Time TIMEOTOUFAILPU after OtoU HO N Fail BSC6900 SET TIME(Optional ) Time SET GCELLFREQ SCAN(Option al) Duration ofpreset time,scanning FRWithin the frequency no AMR to-HR handover is allowed if the SET previous FR-to-HR handover fails GCELLHOFIT due to channel unavailability or PEN(Optional) channel mismatch. to bad quality After a handovr due is successful, the penalty on the SET original serving cell is performed GCELLHOFIT within the "Penalty Time after BQ PEN(Optional) HO": an OL subcell to of the After the receive level UL subcell handover of an MS fails, the MS SET does not perform OL subell-UL GCELLHOIUO subcell handovers within the value (Optional) of the parameter. TIMEOUT Reply TimeOut[ms] BSC6900 PING IP(Optional) Indicates the timeout time of the PING packet TIMEOUT Reply TimeOut[ms] BSC6900 TRC IPADDR(Optio Timeout time for waiting for the nal) TRACERT packet response Timeout Time Out BSC6900 TIMEOUT Time Out BSC6900 TIMEOUT Maximum Delay Time BSC6900 TIMEPUNISH Quick Handover Punish Time BSC6900 PING MAC(Optional ) PING BTSCFM(Opti TRC MAC(Optional ) TRC BTSCFM(Opti ADD BTSABISMUX FLOW(Option al) ADD GEXT2GCEL L(Optional) SET GCELLHOFA Timeout time Indicates the timeout time of the CFM linkwaiting time for Longest tracing detection multiplexing When the multiplexed packet is no longer added with new data and the timer fast handover is After the expires, the multiplexed successful, the penalty on the original serving cell is performed within the "Quick handover punish time": the receive level of the TIMES Number of ping packets BSC6900 Voltage Adjust TIMESLOTVOLADJ Based Timeslots ALLOW Allowed BSC6900 PING IP(Optional) SET GCELLBASIC PARA(Optiona l) SET GCELLHOFIT PEN(Optional) SET GCELLHOIUO (Optional) SET GCELLTMR( Optional) ADD GCNOPERAT OR(Optional) TIMETAPUNISH Penalty Time after TA HO BSC6900 Penalty Time TIMEUTOOFAILPU after UtoO HO N Fail BSC6900 TIQUEUINGTIMER T11 Receive MSC Configuration Message Timer BSC6900 TIWAITMSCMSG BSC6900 TL Time Limit BSC6900 TLLI TLLI BSC6900 SET LOGLIMIT(Op tional) SET MSTOCELL(M andatory) TST Temporary logical link ID in the SNDRSI(Man decimal format Indicates the times of sending PING packets determines This parameter whether the dynamic voltage adjustment function is enabled on the basis of the number of timeslots.time advancing handover After the is successful, the penalty on the original serving cell is performed within the "Penalty Time after TA HO": an UL subcell to OLthe After the receive level of subcell handover of an MS fails, the MS does not perform UL subcell to OL subcell handovers within the value of the parameter. This parameter indicates the queue timer for assignment. When the BSC6900 receives an assignment request and no channel is available for the If the BSC6900 receives configuration data about all the connected MSCs before the timer expires, the BSC6900 concludes that the configuration data is valid. When the operation time of the OMU exceeds the value specified by this parameter, some records are deleted from the operation log. TLT Tout Limit Temperature Alarm Lower Threshold Temperature Alarm Lower Threshold BSC6900 TLTHD BSC6900 TLTHD BSC6900 Lowest expected value of the air outlet temperature. SET In multi-mode scenario, the value BTSDHEUBP( of this parameter in one mode Optional) must be the same as the value of Temperature alarm lower threshold. If the temperature of the SET battery is lower than the value of BTSAPMUBP( this parameter, an alarm indicating Optional) the abnormal temperature is of When the internal temperature the BTS reaches the Temperature SET Alarm Lower Threshold, it reports a BTSDHEUBP( low temperature alarm. Optional) In multi-mode scenario, the value ADD When the time mode is set to SUBTSK(Man "ONTIME", you should set this datory) parameter.mode is set to If the time "DAILY_T", "WEEKLY_T", or ADD "MONTHLY_T", you should set this SUBTSK(Man parameter. This parameter datory) specifies the firstis set to time in If the time mode execution "DAILY_T", "WEEKLY_T", or ADD "MONTHLY_T", you should set this SUBTSK(Opti parameter. This parameter onal) specifies the second execution If the time mode is set to "DAILY_T", "WEEKLY_T", or ADD "MONTHLY_T", you should set this SUBTSK(Opti parameter. This parameter onal) specifies the third execution time in If the time mode is set to "DAILY_T", "WEEKLY_T", or ADD "MONTHLY_T", you should set this SUBTSK(Opti parameter. This parameter onal) specifies the fourth set to If the time mode is execution time "DAILY_T", "WEEKLY_T", or ADD "MONTHLY_T", you should set this SUBTSK(Opti parameter. This parameter onal) specifies the fifth execution time in ADD TRMMAP(Ma ndatory) TRMMAP index ADD Index of the traffic mapping used ADJMAP(Man by the current adjacent node's gold datory) user. STR FRPORTLOO P(Mandatory) Loopback time length TM Execute Time BSC6900 TM1 Execute Time 1 BSC6900 TM2 Execute Time 2 BSC6900 TM3 Execute Time 3 BSC6900 TM4 Execute Time 4 BSC6900 TM5 Execute Time 5 BSC6900 TMI TRMMAP ID BSC6900 TMIGLD TRMMAP index BSC6900 TMLEN Time Length BSC6900 TMODE Test Mode BSC6900 STR BTSVSWRTS T(Optional) Test mode SET GCELLSOFT( Optional) Duration time for determining that a call is hung up because of poor quality Maximum rate of the accumulated alarm blink duration to the alarm SET blink measurement period. Assume ALMBLKPAR this threshold is not 0. When the A(Optional) rate of accumulated alarm blink CHK INNSPCH(Ma ndatory) STR CALLRESLOP TMSI of the MS the accumulated Minimum rate of alarm blink duration to the alarm SET blink measurement period. Assume ALMBLKPAR this threshold is not 0. When the A(Optional) rate of accumulated alarm blink This timer is a protection timer waiting for a signalling link test SET acknowledgement message MTP3TMR(Op (SLTA) from the peer end after a tional) signalling link test message SET This timer is used to send the MTP3TMR(Op signalling link test messages tional) (SLTM) to the peer end regularly. CMP TBLDATA(Ma ndatory) ADD ATERSL(Opti onal) ADD ATERCONSL( Timer for Bad TMRBADQUALDISC Quality DISC STAT Statistic Upper time threshold of raised fault BSC6900 TMRISTHRD BSC6900 TMSI TMSI Lower time threshold of raised fault BSC6900 TMSTLTHRD BSC6900 TMT1TMR Signalling link test ACK timer BSC6900 TMT2TMR Signalling link repeat test timer BSC6900 TNAME Data Table BSC6900 TNMODE Transmission Mode BSC6900 TNMODE Transmission Mode BSC6900 name of the data table distributed on the board. The Ater signaling link operates in the terrestrial transmission or satellite transmission mode. In the areas such as desert and lake where the terrestrial transmission is E1 transmission type of the Pb interface. The terrestrial ADD transmission or satellite PBE1T1(Optio transmission can be selected. In nal) the areas such as desert and lake SET TZ(Mandatory Offset to DST, namely, the ) adjustment to Temporary Offset Cell Reselect time. (TO) indicates the temporary SET correction of C2. This parameter is GCELLIDLEA valid only within the value specified D(Optional) by "Cell Reselect Penalty Time". TO AdjustMethod BSC6900 TO Cell Reselect Temporary Offset BSC6900 TOPBOARDCN TOP Board Cabinet No. BSC6900 TOPBOARDSLOTN TOP Board Slot O No. BSC6900 ADD BTSTOPCON FIG(Optional) ADD BTSTOPCON FIG(Mandator y) Number of the cabinet where the board is located Number of the slot where the board is located TOPBOARDSRN TOP Board Subrack No. BSC6900 TP Log Type BSC6900 TPN Tail Port No. Into-BSC HO REQ Queue Timer BSC6900 TQHO BSC6900 TRACECTHD Debug tracking control threshold BSC6900 TRACECTHD Debug tracking control threshold BSC6900 TRACERTHD Debug tracking restore threshold BSC6900 TRACERTHD Debug tracking restore threshold BSC6900 ADD BTSTOPCON Number of the subrack where the FIG(Optional) boardof the host log to be collected. Type is located If this parameter is set to COL NORMAL, the text log in the FAMLOG(Man \common\fam\famlog directory of datory) the OMU installation path is ADD BTSRXUCHAI N(Mandatory) Number of the optical port where CBN the main board of the RXU ring is BTSRXUCHAI located.of the timer that is started to Length wait for a channel requested by an SET incoming BSC handover request GCELLTMR( message. Optional) When the MSC allowsfor queuing CPU usage threshold the debugging tracing flow control. SET When the average CPU usage of FCCPUTHD( sliding windows reaches or Optional) exceeds the threshold, debugging Packet queue usage threshold for debugging tracing flow control. SET When the average packet queue FCMSGQTHD usage of sliding windows reaches (Optional) or exceeds the threshold,recovery CPU usage threshold for from debugging tracing flow SET control. When the average CPU FCCPUTHD( usage of smooth windows is lower Optional) than the threshold, debugging for Packet queue usage threshold recovery from debugging tracing SET flow control. When the average FCMSGQTHD packet queue usage of smooth (Optional) windows is lower than the SET FCSW(Option al) SET BSCPSSOFT PARA(Optiona l) TRACESW Debug Flow control switch BSC6900 DL Priority TrafficClassDlCoeffic Decision ient Threshold BSC6900 Whether to control the debugging tracing flow determining whether Threshold for the uplink service is preferred. Within the "Flux Measurement Period", if the ratio of the downlink LLC PDU flux and uplink LLC PDU UL Priority TrafficClassUlCoeffic Decision ient Threshold BSC6900 TRAMODE Traffic mode BSC6900 TransMode Transmission Mode BSC6900 TRANSSN Load Transmitting Slot No. BSC6900 Threshold for determining whether the uplink service is preferred. Within the "Flux Measurement Period", if the ratio of the uplink LLC PDU fluxof thedownlink LLC Traffic mode and M3UA link set. At present, only the active/standby ADD and load sharing mode is available. M3LKS(Option If the M3UA links in the link set al) work parameter specifies onlydata This in overriding mode, the one transmission mode between the SET BTS and the BSC6900. The BTSTRANS(M license control modes are different andatory) in different transmission modes. ADD ABISLOADSH ARE(Mandato Slot number of the transparently ry) transmitting interface board SET BSCPSSOFT PARA(Optiona l) ADD IPPATH(Optio Transport type of the adjacent nal) node to which the path belongs. ADD TRMMAP(Opti onal) Transport type ADD TRMLOADTH (Mandatory) Transport type SET BSCABISPRI MAP(Mandato ry) Transmission type of the BTS SET BTSBWPARA (Mandatory) Transmission Type the optical Whether to configure transmission mode for E1 port 0 of SET the BTS3006C/BTS3002E. If the BTSDOMUBP optical transmission mode is (Optional) configured, configure the optical Whether to the BSC6900 can transmission mode for E1 port 1 of SET the BTS3006C/BTS3002E. If the BTSDOMUBP optical transmission mode is (Optional) configured, configure the optical Whether to the BSC6900 can transmission mode for E1 port 2 of SET the BTS3006C/BTS3002E . If the BTSDOMUBP optical transmission mode is (Optional) configured, the BSC6900 can TRANST Transport Type BSC6900 TRANST Transport Type BSC6900 TRANST Transport Type BSC6900 TRANSTYPE Carrier Type BTS Transmission Type E1 Port 0 Set Optical Transmission Mode E1 Port 1 Set Optical Transmission Mode E1 Port 2 Set Optical Transmission Mode BSC6900 TRANSTYPE BSC6900 TRANSTYPE0 BSC6900 TRANSTYPE1 BSC6900 TRANSTYPE2 BSC6900 TRANSTYPE3 E1 Port 3 Set Optical Transmission Mode BSC6900 Whether to configure the optical transmission mode for E1 port 3 of SET the BTS3006C/BTS3002E. If the BTSDOMUBP optical transmission mode is (Optional) configured, the BSC6900 can SET BTSCLKPAR Whether to enable the limit of the A(Mandatory) tracing range SET GCELLRESEL ECTPARA(Op tional) Forbidden time of cell reselection The load handover is triggered SET when the traffic load in a cell is GCELLHOAD( greater than the value of this Optional) parameter. ADD ETHTRKLNK( Port number of the aggregation Mandatory) member ADD ETHTRKLNK( Mandatory) ADD ETHTRK(Man datory) ADD ETHTRKLNK( SET BSCABISPRI MAP(Mandato ry) TRCRNGLMT Trace Mode BSC6900 TRESEL Cell Reselection Forbidden Time BSC6900 TRIGTHRES Load HO Threshold BSC6900 TRKLNKPN Trunk Link No. BSC6900 TRKLNKSN Trunk Link Slot No. BSC6900 Slot number of the aggregation member TRKN Trunk No. BSC6900 aggregation group number TRMI User TRMMAP index BSC6900 Specified TRMMAP index of the user panel TRM load TRMLOADTHINDEX threshold index BSC6900 ADD TRM load threshold index. The IPPATH(Optio TRM load threshold must be nal) configured. ADD RSCGRP(Opti onal) TRM load threshold index ADD TRMLOADTH TRM load threshold index. It is the (Mandatory) unique ID of the load threshold. ADD PPPLNK(Opti onal) TRM load threshold index TRM load TRMLOADTHINDEX threshold index BSC6900 TRM load TRMLOADTHINDEX threshold index BSC6900 TRM load TRMLOADTHINDEX threshold index BSC6900 TRM load TRMLOADTHINDEX threshold index BSC6900 ADD MPGRP(Optio nal) TRM load threshold index ADD IPLOGICPOR T(Optional) TRM load threshold index SET BSCABISPRI MAP(Mandato ry) TRM load threshold index SET BSCABISPRI Transmission resources mapping MAP(Optional) switch ADD IPLOGICPOR Trunk group number of the logical T(Optional) port STR IPCHK(Option al) TRUNK group number ADD ETHMEP(Man datory) SET GCELLCCAC CESS(Optiona l) TRM load TRMLOADTHINDEX threshold index BSC6900 TRM load TRMLOADTHINDEX threshold index Transport Resource Mapping switch BSC6900 TRMMAPSW BSC6900 TRUNKN The Trunk group No. BSC6900 TRUNKN Trunk group No. BSC6900 TRUNKN Trunk No. BSC6900 TRXAIDSWITCH TRX Aiding Function Control BSC6900 TRUNK group number TRX aiding Whether to enable the function. Four aiding modes are available. BCCH aiding: The main BCCH is aided to another normal TRX in this cell. BCCH aiding TRXDURATS Duration Second BSC6900 STR BTSTST(Man datory) Duration SET GTRXCHANH OP(Optional) SET FHO(Mandato ry) SET GTRXCHANH ADD BTSBINDLOC GRP(Mandato ry) TRXHOPINDEX Channel Hop Index BSC6900 Frequency hopping index of the channel in the TRX TRXID TRX ID BSC6900 TRXID TRX ID BSC6900 Index of a TRX, uniquely identifying a TRX in a BSC6900. in the main The ID of TRX added location group, the TRX ID must be globally unique. The same TRX cannot be bound by the TRX boards in a same location group for TRXID1 No.1 TRX ID BSC6900 TRXID10 No.10 TRX ID BSC6900 TRXID11 No.11 TRX ID BSC6900 TRXID12 No.12 TRX ID BSC6900 TRXID13 No.13 TRX ID BSC6900 TRXID14 No.14 TRX ID BSC6900 TRXID15 No.15 TRX ID BSC6900 TRXID16 No.16 TRX ID BSC6900 TRXID17 No.17 TRX ID BSC6900 TRXID18 No.18 TRX ID BSC6900 TRXID19 No.19 TRX ID BSC6900 TRXID2 No.2 TRX ID BSC6900 ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) Index of TRX 1 Index of TRX 10 Index of TRX 11 Index of TRX 12 Index of TRX 13 Index of TRX 14 Index of TRX 15 Index of TRX 16 Index of TRX 17 Index of TRX 18 Index of TRX 19 Index of TRX 2 TRXID20 No.20 TRX ID BSC6900 TRXID21 No.21 TRX ID BSC6900 TRXID22 No.22 TRX ID BSC6900 TRXID23 No.23 TRX ID BSC6900 TRXID24 No.24 TRX ID BSC6900 TRXID3 No.3 TRX ID BSC6900 TRXID4 No.4 TRX ID BSC6900 TRXID5 No.5 TRX ID BSC6900 TRXID6 No.6 TRX ID BSC6900 TRXID7 No.7 TRX ID BSC6900 TRXID8 No.8 TRX ID BSC6900 TRXID9 No.9 TRX ID BSC6900 ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) ADD GCELLHOPA NTGRP(Optio nal) Index of TRX 20 Index of TRX 21 Index of TRX 22 Index of TRX 23 Index of TRX 24 Index of TRX 3 Index of TRX 4 Index of TRX 5 Index of TRX 6 Index of TRX 7 Index of TRX 8 Index of TRX 9 TRXIDLST TRXID LST BSC6900 TRXIDLST TRX Index List BSC6900 SET GCELLHOPQ UICKSETUP( Optional) List of IDs of carriers for frequency SET hopping. List of TRX indexes. You can STR specify one TRX index or more TRXPERFTS TRX indexes, for example, 1 or T(Mandatory) 0&1&2&&5 in the same BTS. SET GTRXCHANH Mobile allocation index offset OP(Optional) (MAIO) of the channel in the TRX ADD GTRX(Option al) ADD BTSBRDCAP( Mandatory) ADD BTSRXUBRD( ADD TRXBIND2PH YBRD(Mandat ory) ADD BTSBINDLOC GRP(Mandato ry) SET GCELLCHMG AD(Optional) ADD TRXBIND2PH YBRD(Mandat ory) Number of a TRX in a BTS. The number of a TRX is unique in a BTS. TRXMAIO Channel MAIO BSC6900 TRXNO TRX No. BSC6900 TrxNum TRX Number BSC6900 TRXPN TRX Board Pass No. BSC6900 Sub-Location Group TRX Board Pass No. Allowed number of carriers bound to a board. the channel bound to Number of the TRX on the TRX board. TRX Pass No. of the DTRU/DRRU/BTS3900B of the BTS in separate mode must be 0 TRX board pass number in the sublocation group to which the TRX of the main location group is bound This parameter specifies whether the TRX priority is considered during channel assignment. TRXPN BSC6900 TRXPRIALLOW Allocation TRX Priority Allowed BSC6900 TRXTP TRX Board Type BSC6900 Type of the TRX board bound to the TRX TS Time Slot BSC6900 BLK ATERE1T1(M It indicates the Ater interface andatory) timeslot number BLK AE1T1(Manda tory) LOP E1T1(Mandat ory) STR E1T1TST(Opti It indicates the A interface timeslot number. The parameter supports multiple values. TS Time Slot BSC6900 TS time slot No. BSC6900 Timeslot number TS Bearing Timeslot BSC6900 ADD BC(Mandatory ) Timesolt of bearing channels SET BTSOMLTS( Mandatory) TS Time Slot NO. BSC6900 Number of the timeslot on the port TSBITMAP Bearing time slot BSC6900 ADD PPPLNK(Man Bearer E1/T1 port timeslot of PPP datory) link. ADD MPLNK(Mand atory) ADD BTSPPPLNK( Mandatory) ADD BTSMPLNK(M TSBITMAP Bearing time slot BSC6900 TSBITMAP Bearing Time Slot BSC6900 TSC TSC BSC6900 TSCOUNT Idle TS Count BSC6900 TSCPLANEN TSC Plan Enable BSC6900 Bearer E1/T1 port timeslot of MP link. Timeslot of the E1/T1 link carrying the PPP link. The timeslot of an E1 port cannot be used by different PPPTSC is short for the Training The links. Sequence Code. ADD The TSC must be the same as the GCELLMAGR BCC. The delay equalization is P(Optional) performed by using the specified Number of idle timeslots. You can configure up to 128 idle timeslots SET for the BTS at a time. A BTS can BTSIDLETS( be configured with up to 512 idle Mandatory) timeslots.to allow TSC planning. If Whether this parameter is set to No, the SET TSC values in all MA groups of the GCELLSOFT( cell cannot be modified. In this Optional) case, the TSC values are ADD TSCROSS(Op tional) Timeslot cross index STR TRANSPERF TST(Mandator y) Duration in timeslot mode ADD BTSMONITO Index of the monitoring timeslot. RTS(Optional) The index is unique in a BTS. ADD SCHTSK(Man datory) SET SCHTSKSW( Name of the scheduled task. TSCROSSX Time slot cross index BSC6900 TSDURAT Duration * 10 minutes BSC6900 TSIDX Timeslot Index BSC6900 TSKN Task Name BSC6900 TSMASK Timeslot Mask BSC6900 TSMASK TS Mask BSC6900 TSN Tail Slot No. BSC6900 ADD ATEROML(Ma ndatory) ADD BTSABISHDL CPATH(Mand atory) ADD BTSRXUCHAI N(Mandatory) CBN BTSRXUCHAI Time slots for Ater operation and maintenance. These time slots are provided by the ports connected to the Ater connection path. The 64 kbit/s timeslots on the port are numbered from 1 to 31. Number of the slot where the main board of the RXU ring is located. The slot No. is unique in the same BTS. TSNO Timeslot No. BSC6900 TSPRIORITY Timeslot Priority BSC6900 TSPWRRESERVE Timeslot Power Reserve BSC6900 Fast Flux TSRAPIDADJPERIO Measurement D TBF Timer BSC6900 TSRAPIDADJSWIT CH Fast Flux Detection Switch BSC6900 TSRATE Time Slot Rate BSC6900 TSRN Tail Subrack No. BSC6900 ADD PBSL(Mandat Timeslot number of Pb signaling ory) link Assignment priority level of the SET channel. If this parameter is less, GTRXCHAN( the assignment priority level of the Optional) channel is degree by which the Maximum higher. output power of the multi-density SET TRX board can exceed the GTRXDEV(Op maximum output power within a tional) shortflux measurement duration. Fast time SET Normal flux measurement is BSCPSSOFT performed after the fast flux PARA(Optiona measurement lasts over the period l) specified to enable fast flux Whether by this parameter. SET detection. When this parameter is BSCPSSOFT set to Open, fast timeslot PARA(Optiona adjustment is possible after the l) TBF is set up. ADD BTSMONITO RTS(Mandator y) Rate of the monitoring timeslot ADD BTSRXUCHAI Number of the subrack where the N(Mandatory) main board of the RXU ring is CBN located. The subrack No. is unique BTSRXUCHAI in the same BTS. STR BTSTST(Man datory) Test mode STR TRANSPERF TST(Mandator y) Test timeslot TSTMODE Test Mode BSC6900 TSTTIMESLOT Test Timeslot BSC6900 TSTTYPE Test Type BSC6900 Allow Turning Off TsTurningOffEnable Time Slot BSC6900 TT Topo Type BSC6900 STR BTSBATTTST (Mandatory) Typeparameter test This of battery specifies whether to allow the BTS to enable the TRX SET Intelligent Shutdown on Timeslot BSCDSTPA(O Level feature. When this parameter ptional) is set topologyand the BTS supports RXU to YES type, that is, RXU ring topology or RXU chain ADD topology. In the case of the ring BTSRXUCHAI topology, the optical ports of the N(Mandatory) head and tail boards must be TTL Time to Live BSC6900 TTL PKT TTL BSC6900 Dyn. Turning Off TURNOFFCELLCHA Cell Busy NNUM Channel Num. BSC6900 TURNOFFCELLSTP Dyn. Turning Off TIME Cell Stop Time BSC6900 TURNOFFCELLSTR Dyn. Turning Off TIME Cell Start Time BSC6900 TURNOFFENABLE Enable Turning Off Cell BSC6900 TURNONCELLLOA DTHRD Dyn. Turning On Cell Load Threshold BSC6900 Temperature Alarm Upper Threshold Temperature Alarm Upper Threshold PING IP(Optional) TRC MAC(Optional ) TRC BTSCFM(Opti SET GCELLDYNT URNOFF(Opti onal) SET GCELLDYNT URNOFF(Opti onal) SET GCELLDYNT URNOFF(Opti onal) SET GCELLDYNT URNOFF(Man datory) SET GCELLDYNT URNOFF(Opti onal) TTL(Time to Live) of the PING packet Indicates the live time of the packet for CFM link tracing detection If the number of channels (including PDCH and TCH) occupied on a cell that can be disabled is lower than this threshold, the procedure for This parameter specifies the end time of a period during which the cell is disabled. TUTHD BSC6900 TUTHD BSC6900 This parameter specifies the start time of a period during which the cell is disabled. specifies whether This parameter to enable the Dynamic Cell Power Off feature. When this parameter is set to ENABLE, the BSC can disable the cell within the period of When the load of the same coverage cell is higher than this threshold for a period, the disabled cell is enabled. Temperature alarm upper threshold. If the temperature of the SET battery is higher than the value of BTSAPMUBP( this parameter, an alarm indicating Optional) the abnormal upper threshold of the Temperature temperature is cabinet. When the cabinet SET temperature is higher than this BTSDHEUBP( parameter, an alarm indicating the Optional) abnormal cabinet temperature is TWFCMCHIDLE Observation Cell Channel Reservation Timer BSC6900 Observation Cell TRX Reservation Timer BSC6900 Serving Cell TCHF Reservation Timer BSC6900 Information Collection Response Timer BSC6900 ADD AISSCFG(Opti Value of the timer for reserving the onal) channels in the observed cell ADD AISSCFG(Opti Value of the timer for reserving the onal) TRXs in the observed cell ADD AISSCFG(Opti Value of the timer for reserving the onal) TCHFs in the serving cell ADD Value of the timer for waiting for AISSCFG(Opti the response to information onal) collection ADD AISSCFG(Opti Value of the timer for searching for onal) the MS ADD AISSCFG(Opti Value of the timer for activating the onal) reserved resources of the BTS ADD AISSCFG(Opti onal) SET GCELLIDLEB ASIC(Optional ) Value of the timer for waiting for the synchronization report from the BTS Tx-integer (T for short). This parameter specifies the number of timeslots between two transmissions when an MS sends multiple consecutive channel TWFCMTRXIDLE TWFCSCHIDLE TWFRRMRSP TWFSEEKMS MS Search Timer BSC6900 BTS Reserved Resource Activation Timer TWFSYNCACK BSC6900 TWFSYNCRPT BTS SYNC_REPORT Timer BSC6900 TX TX-integer Assigned Power of Pass A Operators 1 Assigned Power of Pass A Operators 2 Assigned Power of Pass A Operators 3 Assigned Power of Pass A Operators 4 BSC6900 TXAOPER1 BSC6900 SET The maximum power that BTSRXUBP(O operators 1 can use on pass A of ptional) MRRU board. SET The maximum power that BTSRXUBP(O operators 2 can use on pass A of ptional) MRRU board. SET The maximum power that BTSRXUBP(O operators 3 can use on pass A of ptional) MRRU board. SET The maximum power that BTSRXUBP(O operators 4 can use on pass A of ptional) MRRU board. TXAOPER2 BSC6900 TXAOPER3 BSC6900 TXAOPER4 BSC6900 TXBOPER1 Assigned Power of Pass B Operators 1 Assigned Power of Pass B Operators 2 Assigned Power of Pass B Operators 3 Assigned Power of Pass B Operators 4 BSC6900 SET The maximum power that BTSRXUBP(O operators 1 can use on pass B of ptional) MRRU board. SET The maximum power that BTSRXUBP(O operators 2 can use on pass B of ptional) MRRU board. SET The maximum power that BTSRXUBP(O operators 3 can use on pass B of ptional) MRRU board. SET The maximum power that BTSRXUBP(O operators 4 can use on pass B of ptional) MRRU board. ADD IPPATH(Mand atory) Transmit bandwidth of IP path ADD RSCGRP(Man datory) Transmit bandwidth TXBOPER2 BSC6900 TXBOPER3 BSC6900 TXBOPER4 BSC6900 TXBW Forward Bandwidth BSC6900 TxBw Forward Bandwidth BSC6900 TXINT Interval of send[ms] BSC6900 PING IP(Optional) TXINT TX_INT BSC6900 Indicates the interval between the two sent PING packets timeslots of Extension transmission random access. This parameter SET determines the interval of sending GCELLPRAC another channel request after the H(Optional) MS fails to request a channel. ADD SUBRACK(Ma ndatory) Type of the subrack Explanation of the finish type of the batch commands RUN 1. ANY_ERR_RETURN: If there is BATCHFILE( a command whose execution fails, Mandatory) the execution ofspecifies the This parameter the batch frequency band of new cells. Each ADD new cell can be allocated GCELL(Mand frequencies of only one frequency atory) band. Once the frequency band is SET BSCPCUTYP E(Mandatory) Type of the PCU TYPE Subrack Type BSC6900 TYPE Finish Type BSC6900 TYPE Freq. Band BSC6900 TYPE PCU Type BSC6900 TYPE Freq. Band BSC6900 ADD BTSAUTOPL AN(Mandatory ) ADD BTSCABINET (Optional) ADD GCELLQUICK SETUP(Mand atory) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) Frequency band to which the newly added cell belongs. Only one frequency band can be selected as the frequency band of each new cell and cannot be changed after TYPE Cabinet Type BSC6900 Type of a cabinet Cell type. Currently, the fast BTS construction is available for only GSM900 and DCS1800 cells. TYPE Cell Type Up0 Power Attenuation Factor BSC6900 U0GEN BSC6900 Power attenuation factor of uplink tributary 0 U0TOW Up0 Tower-Top Amplifier Flag BSC6900 U0TRX Up0 Link No. BSC6900 Whether there is a TMA on uplink tributary uplink tributary 0. Each Index of 0 uplink tributary can be configured with a maximum of 12 TRXs. This parameter indicates the serial number of a TRX on the uplink U0TRXBPN Up0 TRX Board Pass No. BSC6900 TRX board pass number connected to uplink tributary 0 Number of the slot where the TRX board that connects to uplink tributary 0 is located Number of the subrack where the TRX board that connects to uplink tributary 0 is located U0TRXSN Up0 TRX Slot No. BSC6900 U0TRXSRN Up0 TRX Subrack No. Up1 Power Attenuation Factor BSC6900 U1GEN BSC6900 Power attenuation factor of uplink tributary 1 U1TOW Up1 Tower-Top Amplifier Flag BSC6900 U1TRX Up1 Link No. BSC6900 Whether there is a TMA on uplink tributary uplink tributary 1. Each Index of 1 uplink tributary can connect to a maximum of 12 TRXs. This parameter indicates the serial number of a TRX on the uplink U1TRXBPN Up1 TRX Board Pass No. BSC6900 U1TRXSN Up1 TRX Slot No. BSC6900 U1TRXSRN Up1 TRX Subrack No. BSC6900 CS Preferred Call ucCSPrefCallReestP Reestablish rio Priority BSC6900 CS Preferred CS ucCSPrefCSEmergC Emergency Call allPrio Priority BSC6900 ucCSPrefCSOrgCall CS Preferred CS Prio MOC Priority BSC6900 ucCSPrefCSTermCa CS Preferred CS llPrio MTC Priority BSC6900 ucCSPrefInBscHoPri CS Preferred Intoo BSC HO Priority BSC6900 CS Preferred ucCSPrefIntraBscHo Intra-BSC HO Prio Priority CS Preferred Other Service Priority BSC6900 ucCSPrefOtherPrio BSC6900 ucCSPrefPSPrio CS Preferred PS Priority BSC6900 CS Preferred Supplement ucCSPrefSupplePrio Priority BSC6900 SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET BTSANTFEE DERCONNEC T(Optional) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) TRX board pass number connected to uplink tributary 1 Number of the slot where the TRX board that connects to uplink tributary 1 is located Number of the subrack where the TRX board that connects to uplink tributarypriority of call Service 1 is located reestablishment when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC.CS Service priority of the emergency call when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC.CS MSService priority of the originated call when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC.CS MSService priority of the terminated call when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC.incoming Service priority of the BSC handover when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC.intra-BSC Service priority of the handover when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC. Priority of other services when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC. priority when CS PS service services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC. supplementary services Priority of when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC. ucCSPrefVBSPrio CS Preferred VBS Priority BSC6900 CS Preferred ucCSPrefVGCSPrio VGCS Priority BSC6900 ucCtrlOfCicIE Controlling of CIC IE In BSS Map Messages BSC6900 VBS service priority when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC. VGCS service priority when CS services are preferred. This parameter is used for the flow control in the case of Abis over IP/HDLC. IP, if the parameter is set In A over to ON, the circuit IE in the A SET interface extended signaling must MSGSOFTPA be processed in the same way as RA(Optional) that in A over non-IP. Otherwise, SET CSABISCON GCTRL(Optio nal) SET CSABISCON GCTRL(Optio nal) SET OTHSOFTPA RA(Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) Whether the BSC selects the TCHs on the link that reports an RAI alarm. UCISRAIFAULT Rai Alarm Switch BSC6900 PS Preferred Call ucPSPrefCallReestP Reestablish rio Service Priority BSC6900 PS Preferred CS ucPSPrefCSEmergC Emergency Call allPrio Service Priority BSC6900 PS Preferred CS ucPSPrefCSOrgCall Original Call Prio Service Priority BSC6900 PS Preferred CS ucPSPrefCSTermCa Terminated Call llPrio Service Priority BSC6900 PS Preferred In ucPSPrefInBscHoPri Handover Service o Priority BSC6900 PS Preferred ucPSPrefIntraBscHo Intra Handover Prio Service Priority PS Preferred Other Service Priority Reestablish service priority of a PS preferred call CS emergency call service priority of a PS preferred call CS original call service priority of a PS preferred call CS terminated call service priority of a PS preferred call BSC handover service priority of a PS preferred call BSC6900 BSC intra handover service priority of a PS preferred call ucPSPrefOtherPrio BSC6900 Other service priority of a PS preferred call ucPSPrefPSPrio PS Preferred PS Service Priority BSC6900 PS service priority of a PS preferred call PS Preferred Supplement ucPSPrefSupplePrio Service Priority PS Preferred VBS Service Priority BSC6900 ucPSPrefVBSPrio BSC6900 PS Preferred VGCS Service ucPSPrefVGCSPrio Priority BSC6900 SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) SET PSPREFABIS CONGCTRL( Optional) Supplement service priority of a PS preferred call VBS service priority of a PS preferred call Speech Ver ucSpeechVerOptiInH Change Optimize o in Handover BSC6900 UDPMUXMODREC V Receive UDP MUX Mode BSC6900 UDPMUXMODSEN D Sender UDP MUX Mode BSC6900 VGCS service priority of a PS preferred call In case of intra-BSC, if this parameter is set to ON, the same SET channel type and voice version as AITFOTHPAR those of the original channel are A(Optional) selected. UDP multiplexing mode of the receiving party. The mode that ADD does not support the function of IPMUX(Manda compressing the RTP header tory) indicates that the receiving the UDP multiplexing mode of party sending party. If the mode that ADD does not support the function of IPMUX(Manda compressing the RTP header tory) indicates that the sending party ADD NSVLLOCAL( UDP port number of the local Mandatory) NSVL ADD NSVLREMOT UDP port number of the remote E(Mandatory) NSVL Group to which the operator belongs. This parameter is used to limit the right of threshold for the Upper humidity the operator. environment alarm box to report an SET alarm indicating that the ambient BTSEXD(Opti humidity is too high. If the ambient onal) humidity of the BTS is higher than ADD OP(Optional) SET Used to identify the uplink access GCELLGSMR message from the MS. The value (Optional) 64 is invalid. STR E1T1TST(Opti Unit time for the error code ratio onal) test UDPPN Local UDP Port No. BSC6900 UDPPN Remote UDP Port No. BSC6900 UG Operator Level BSC6900 UHUMTHD Upper Humidity Threshold BSC6900 UIC UIC BSC6900 UINTTIME Unit time[ms] BSC6900 UL Upper Limit BSC6900 UL Upper Limit BSC6900 SET ALMPORT(Op tional) SET BTSENVALM PORT(Option al) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) ADD G2GNCELL(O ptional) ADD G2GNCELL(O ptional) SET BSCPSSOFT PARA(Optiona l) Upper limit for triggering an alarm Upper limit of the alarm. This parameter is valid to the analog port. Minimum interval between two consecutive uplink power control commands is an AMR full-rate call, Current call and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. Current call is an AMR full-rate call, and when the uplink receive quality is lower than the threshold, Huawei III power control is performed. Current call is an AMR half-rate call, and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. an AMR half-rate Current call is call, and when the uplink receive quality is lower than the threshold, Huawei III power control is performed. The P/N criterion must be met for triggering a UL BQ handover. That is, the UL BQ handover can be triggered only if P measurement reports among N measurement The P/N criterion must be met for triggering a UL BQ handover. That is, the UL BQ handover can be triggered only if P measurement reports among N measurement If the ratio of uplink flux to downlink flux is greater than or equal to the threshold during the fast flux measurement, the uplink services takes priority. Duration for uplink data transmission on the original channel if the TC resources are changed before and after the handover ULADJPRD PwrCtrlULAdjPeri od BSC6900 ULAFSREXQUALHI ULAFSRexQualH GHTHRED ighThred BSC6900 ULAFSREXQUALLO ULAFSRexQualL WTHRED owThred BSC6900 ULAHSREXQUALHI ULAHSRexQual GHTHRED HighThred BSC6900 ULAHSREXQUALL OWTHRED ULAHSRexQualL owThred BSC6900 ULBQLASTTIME UL BQ HO Last Time BSC6900 ULBQSTATTIME UL BQ HO Static Time BSC6900 Fast UL Priority ULCOEFFICIENTTS Decision RAPIDADJ Threshold BSC6900 ULDATAFWDTMR Timer for UL Data Forward BSC6900 ulDlAckFreq RRBP Frequency for GPRS Downlink TBF BSC6900 SET GCELLTMR( Optional) SET BSCPSSOFT Number of downlink GRPS TBF PARA(Optiona RLC blocks sent before RRBP field l) is sent ULEDGETHRES Edge HO UL RX_LEV Threshold BSC6900 ulEgprsDlAckFreq RRBP Frequency for EGPRS Downlink TBF BSC6900 ACK Frequency for EGPRS Uplink TBF ulEgprsUlAckFreq BSC6900 SET GCELLHOBA SIC(Optional) SET BSCPSSOFT PARA(Optiona l) SET BSCPSSOFT PARA(Optiona l) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) If the UL receive level remains lower than the "Edge HO UL RX_LEV Threshold" for a period, the edge handover is triggered. Number of downlink GRPS TBF RLC blocks sent before RRBP field is sent III UL Filter ULFILTADJFACTOR Adjust Factor BSC6900 ULFSREXQUALHIG ULFSRexQualHi HTHRED ghThred BSC6900 ULFSREXQUALLO WTHRED ULFSRexQualLo wThred BSC6900 ULHSREXQUALHIG ULHSRexQualHi HTHRED ghThred BSC6900 ULHSREXQUALLO WTHRED ULHSRexQualLo wThred BSC6900 ULHYSTF1 AMR UL Coding Rate adj.hyst1[F] BSC6900 ULHYSTF2 AMR UL Coding Rate adj.hyst2[F] BSC6900 ULHYSTF3 AMR UL Coding Rate adj.hyst3[F] BSC6900 ULHYSTH1 AMR UL Coding Rate adj.hyst1[H] BSC6900 Period of acknowledging the EGPRS TBF RLC uplink data block Filter adjustment factor for uplink power control. If this parameter is set to a large value, the filtered values become smooth, thus reducing the impact of poor Current call is a full-rate call, and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. Current call is a full-rate call, and when the uplink receive quality is lower than the threshold, Huawei III power control is performed. Current call is a half-rate call, and when the uplink receive quality is greater than the threshold, Huawei III power control is performed. Current call is a half-rate call, and when the uplink receive quality is lower than the threshold, Huawei III power control RQI in the call Based on the is performed. measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding ULHYSTH2 AMR UL Coding Rate adj.hyst2[H] BSC6900 SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) ULHYSTH3 AMR UL Coding Rate adj.hyst3[H] BSC6900 AMR UL Coding Rate adj.hyst1[WB] AMR UL Coding Rate adj.hyst2[WB] ULHYSTWB1 BSC6900 ULHYSTWB2 BSC6900 UlLdrThrd2GCell 2G Cell UL Basic Congest Thred BSC6900 ULLEVFILTLEN Filter Length for UL RX_LEV BSC6900 SET GCELLCCAM R(Optional) SET GCELLHOINT ERRATLDB(O Threshold of uplink Basic ptional) Congestion state inreceives When the network a 2G Cell measurement reports, in SET consideration of the accuracy of a GCELLPWR2( single measurement report, the Optional) measurement values in certain Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding ULMAXDownSte ULMAXDOWNSTEP p BSC6900 SET Maximum permissible adjustment GCELLPWR3( step when the BSC decreases the Optional) uplink transmit power SET GCELLPWR3( Optional) SET GCELLHOINT ERRATLDB(O ptional) SET GCELLPWR2( Optional) SET GCELLPWRB ASIC(Optional ) SET GCELLPWRB ASIC(Optional ) Maximum permissible adjustment step when the BSC increases the uplink transmit power ULMAXUPSTEP ULMAXUpStep 2G Cell UL Overload Congest Thred BSC6900 UlOlcThrd2GCell BSC6900 ULPREDLEND UL MR. Number Predicted BSC6900 ULQHIGHTHRED UL Qual. Upper Threshold BSC6900 ULQLOWTHRED UL Qual. Lower Threshold BSC6900 Threshold of uplink overload congestion state in a 2G Cell After the BSC delivers the power control command, it should wait for a certain period before affirm the effect of the power control. Therefore, the MR that power The MS transmit power is decreased only when the quality level of the MS transmit signal is smaller than the value of the parameter. If (thepower is The MS transmit uplink receive increased only when the quality level of the MS transmit signal is greater than the value of the parameter. If (the uplink receive ULQUAFILTLEN Filter Length for UL Qual. BSC6900 SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLPWR2( Optional) SET GCELLHOEM G(Optional) SET GCELLAMRQ UL(Optional) SET GCELLAMRQ UL(Optional) ULQUALBADTRIG UL Qual. Bad Trig Threshold BSC6900 UL Qual. Bad ULQUALBADUPLEV UpLEVDiff BSC6900 ULQUALIMIT UL Qual. Threshold BSC6900 ULQUALIMITAMRF UL Qual. Limit for R AMR FR BSC6900 ULQUALIMITAMRH UL Qual. Limit for R AMR HR BSC6900 When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating In the case of power control, when the uplink receive quality is not smaller than "UL Qual. Bad Trig Threshold", the actual "UL RX_LEV Upper case of power increased by In the Threshold" is control, when the uplink receive quality is not smaller than "UL Qual. Bad Trig Threshold", the actual "UL RX_LEV Upper Threshold" is increased by An emergency handover due to bad quality is triggered when the uplink receive quality is not smaller than value of this parameter The "UL Qual. Threshold". corresponds to multiplying quality level 0 to 7 by 10. An emergency handover can be triggered only when the uplink receive quality of The value of this parameter corresponds to multiplying quality level 0 to 7 by 10. An emergency handover can be triggered only when the uplink receive quality of ULREXLEVADJFCT ULRexLevAdjust R Factor BSC6900 ULREXLEVEXPFLT ULRexLevExpon LEN entFilterLen BSC6900 SET GCELLPWR3( Step adjustment ratio of the receive Optional) level inthe networkpower control When the uplink receives measurement reports, the SET measurement values in several GCELLPWR3( straight measurement reports are Optional) filtered to reflect the radio operating SET When the uplink receive level GCELLPWR3( reaches the threshold, Huawei III Optional) power control is performed. SET When the uplink receive level is GCELLPWR3( lower than the threshold, Huawei III Optional) power the network receives When control is performed. measurement reports, the SET measurement values in several GCELLPWR3( straight measurement reports are Optional) filtered to reflect the radio operating SET GCELLPWR3( Step adjustment ratio of the receive Optional) quality in the uplink power control ULREXLEVHIGHTH ULRexLevHighTh RED red BSC6900 ULREXLEVLOWTH ULRexLevLowTh RED red BSC6900 ULREXLEVSLDWIN ULRexLevSlideW DOW indow BSC6900 ULREXQUALADJFC ULRexQualAdjus TR tFactor BSC6900 ULREXQUALEXPFL ULRexQualExpo TLEN nentFilterLen BSC6900 SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWR3( Optional) SET GCELLPWRB ASIC(Optional ) SET GCELLPWRB ASIC(Optional ) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) SET GCELLCCAM R(Optional) ULREXQUALSLDWI ULRexQualSlide NDOW Window BSC6900 ULRXLEVPROTECT III UL RexLev FACTOR Protect Factor BSC6900 ULRXQUALPROTE III UL RexQual CTFACTOR Protect Factor BSC6900 When the network receives measurement reports, the measurement values in several straight measurement reports are filteredthe reflect the radio operating When to network receives measurement reports, the measurement values in several straight measurement reports are filtered strength factor for the Signal to reflect the radio operating protective limitation on calculating the uplink power control adjustment step. The calculated step value cannot strength the step value that Signal exceed factor for the protective limitation on calculating the uplink power control adjustment step. The calculated step value cannot exceed the step value that When the uplink receive level reaches the threshold, Huawei II power control is performed. When the uplink receive level is below the threshold, Huawei II power control RQI in the call Based on the is performed. measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding ULSSHIGHTHRED UL RX_LEV Upper Threshold BSC6900 ULSSLOWTHRED UL RX_LEV Lower Threshold BSC6900 ULTHF1 AMR UL Coding Rate adj.th1[F] BSC6900 ULTHF2 AMR UL Coding Rate adj.th2[F] BSC6900 ULTHF3 AMR UL Coding Rate adj.th3[F] BSC6900 ULTHH1 AMR UL Coding Rate adj.th1[H] BSC6900 ULTHH2 AMR UL Coding Rate adj.th2[H] BSC6900 ULTHH3 AMR UL Coding Rate adj.th3[H] BSC6900 ULTHWB1 AMR UL Coding Rate adj.th1[WB] BSC6900 ULTHWB2 AMR UL Coding Rate adj.th2[WB] BSC6900 Based on the RQI in the call measurement report, the BTS and SET MS automatically adjust the current GCELLCCAM speech coding rate according to R(Optional) the related algorithm.the call Based on the RQI in The coding measurement report, the BTS and SET MS automatically adjust the current GCELLCCAM speech coding rate according to R(Optional) the related algorithm. The coding SET GCELLHOIUO (Optional) SET BSCPSSOFT PARA(Optiona l) UL to OL HO ULTOOLHOALLOW Allowed BSC6900 Whether a UL subcell to OL subcell handover is allowed ACK Frequency for GPRS Uplink ulUlAckFreq TBF BSC6900 Um Interface Crosstalk UMCROSSTALKOP Optimization TALLOWED Allowed BSC6900 Number of uplink GRPS TBF RLC blocks sent before an acknowledgement is required Whether the crosstalk optimization function over the Um interface is SET allowed. If this parameter is set to GCELLSOFT( YES when call drops occur on the Optional) Um interface, this function can SET Timer of penalty on a neighboring GCELLHOFIT cell when a handover fails due to PEN(Optional) faults of air interface connection. SET BSCBASIC(O Phase tag for GSM protocols that ptional) the Um interface supports Whether to support the balanced mode or the unbalanced mode. SET When this parameter is set to YES, E1T1(Optional you can set the DIP switches on ) the interface boards. You do not SET Retry times after the peer response BSCNSPARA( timer expires during NSVC Optional) unblocking alarm triggering Abnormally threshold when the ANT_A SET tributary antenna current is too BTSRXUBP(O light. When the actual current is ptional) lower than the configured value, Abnormally alarm triggering threshold when the ANT_B SET tributary antenna current is too BTSRXUBP(O light. When the actual current is ptional) lower than the configured value, Abnormally alarm triggering threshold when the RET tributary SET antenna current is too light. When BTSRXUBP(O the actual current is lower than the ptional) configured value, the ALD Current UMPENALTYTIMER UmPenaltyTimer BSC6900 UmVer Um Interface Tag BSC6900 UNBA Support Balance BSC6900 UNBLOCKRETRY Unblock Retry BSC6900 UnderCurAlmThdA ANT_A ALD Under Current Occur Threshold BSC6900 ANT_B ALD Under Current Occur Threshold BSC6900 UnderCurAlmThdB RET ALD Under UnderCurAlmThdRE Current Occur T Threshold BSC6900 UnderCurClrThdA ANT_A ALD Under Current Clear Threshold ANT_B ALD Under Current Clear Threshold BSC6900 UnderCurClrThdB BSC6900 RET ALD Under Current Clear UnderCurClrThdRET Threshold BSC6900 UPBTSID Up BTS Index BSC6900 Abnormally alarm clearance triggering threshold when the SET ANT_A tributary antenna current is BTSRXUBP(O too light. When the actual current is ptional) higher than alarm clearance Abnormally the configured value, triggering threshold when the SET ANT_B tributary antenna current is BTSRXUBP(O too light. When the actual current is ptional) higher than alarm clearance Abnormally the configured value, triggering threshold when the RET SET tributary antenna current is too BTSRXUBP(O light. When the actual current is ptional) higher than the configured value, ADD BTSAUTOPL AN(Mandatory Index of upper-level BTS ) connected to the BTS ADD BTSCONNEC T(Mandatory) ADD BTSAUTOPL AN(Mandatory ) ADD BTSCONNEC T(Mandatory) ADD BTSAUTOPL AN(Mandatory ) ADD BTSCONNEC T(Mandatory) ADD GSMSCB(Ma ndatory) SET GCELLPSCS( Optional) SET GCELLEGPR SPARA(Optio nal) Number of the upper-level BTS. The number is unique in a BSC6900. UPBTSID Dest Father BTS Index BSC6900 UPBTSIDTYPE UPBTS Index type BSC6900 Index type of upper-level BTS connected to the BTS UPBTSIDTYPE Dest Father Index Type BSC6900 UPBTSNAME Up BTS Name BSC6900 UPBTSNAME Dest Father BTS Name BSC6900 UPDATE Update BSC6900 UPDEFAULTCS Uplink Default CS Type BSC6900 UPDEFAULTMCS Uplink Default MCS Type BSC6900 Index type of upper-level BTSBTS Name of the the upper-level connected to the BTS. The BTS name is unique within a same BSC6900. This parameter cannot contain , ; = "upper-level BTS. The Name of the ' more than two name is unique in a BSC6900. The invalid characters (\, /, :, *, ?, ", <, >, |, and #) cannot appear in the name. code for a simple cell Update broadcast message. This parameter together with "Code" uniquely identifies a cell broadcast message. of the Default coding scheme uplink GPRS link. If the uplink adopts the dynamic adjustment coding scheme, this parameter can be usedcoding the coding scheme Default to set scheme of the uplink EDGE link. If the uplink adopts the dynamic adjustment coding scheme, this parameter can be used to set the coding scheme Uplink Multiplex Threshold of UPDYNCHNTRANL Dynamic Channel EV Conversion BSC6900 Uplink EGPRS2UPE2ADEFAULTMC A Default MCS S Type BSC6900 Uplink EGPRS2A Fixed MCS Type BSC6900 UPE2AFIXMCS Inactive Period of UPEXTTBFINACTD Extended Uplink ELAY TBF BSC6900 SET GCELLPSCH M(Optional) SET GCELLEGPR SPARA(Optio nal) SET GCELLEGPR SPARA(Optio nal) SET GCELLPRIVA TEOPTPARA( Optional) SET GCELLPSCS( Optional) SET GCELLEGPR SPARA(Optio nal) SET GCELLCHMG AD(Optional) SET GCELLCHMG AD(Optional) SET BTSFALLBAC K(Optional) UPFIXCS Uplink Fixed CS Type BSC6900 UPFIXMCS Uplink Fixed MCS Type BSC6900 UPINTERFQUALLIM Interf.of UL Qual. IT Threshold BSC6900 Interf.of UL Level UPINTERLEVLIMIT Threshold BSC6900 UPLNKMAXLENGT Uplink Max H Length OML/ESL/EML LAPD Uplink Window Size BSC6900 Uplink multiplex threshold of dynamic channel conversion. When the subscriber number on the channel reaches the value (threshold/10), scheme used on the Default coding the dynamic uplink EGPRS2-A link. If the uplink uses the dynamic coding scheme, this parameter specifies the coding scheme that is used for the used Fixed coding scheme that is on the uplink EGPRS2-A link. If the uplink uses the fixed coding scheme, this parameter can be set to any one in MCS1-6 and UAS7Inactive period of extended uplink TBF. After the network side receives the last uplink RLC data block (CountValue=0) of the MS supporting the extended uplink Adjustment mode of the uplink GPRS link coding scheme. If the fixed coding scheme is used, this parameter is a value ranging from CS1 to CS4. If the dynamic coding Coding scheme of the uplink EDGE link. If the uplink uses the fixed coding scheme, this parameter is set to a value ranging from MCS1 to MCS9. Ifthresholds uses the One of the the uplink to determine whether the uplink interference exists. If the uplink level is not smaller than "Interf.of UL Level Threshold" thresholds to determine One of the and the uplink quality of whether the uplink interference exists. If the uplink level is not smaller than "Interf.of UL Level Threshold" and the uplink quality of Maximum time in which a user uses the uplink of its VGCS call continuously when the BTS works in fallback mode UPOMLWS BSC6900 UPPCEN UPPERGRPID UL PC Allowed BSC6900 Upper Class Transport Resource Group No. BSC6900 SET BTSLAPDWS( Size of the OML/ESL/EML Uplink Optional) LAPD Window SET GCELLBASIC PARA(Optiona l) Whether to allow MS power control Upper class transport resource ADD group No. It is valid only when " Is RSCGRP(Man First Class Transport Resource datory) Group " is set to NO. UPPERLP The Upper logic port number BSC6900 Duration of UPRXLEVLASTTIM Uplink Received E Level Differ BSC6900 Smooth Factor of UPRXLEVSMOOTH Uplink Received PARA Level BSC6900 Observe Time of UPRXLEVSTATICTI UL RX Level ME Difference BSC6900 UPSENDSMDIS Short Message Uplink Disabled BSC6900 UPTBFRELDELAY Release Delay of Non-extended Uplink TBF BSC6900 Uplink TBF UPTHDCSDEGRAD Threshold from E1 CS2 to CS1 Uplink TBF UPTHDCSDEGRAD Threshold from E2 CS3 to CS2 Uplink TBF UPTHDCSDEGRAD Threshold from E3 CS4 to CS3 Uplink TBF UPTHDCSUPGRAD Threshold from E1 CS1 to CS2 Uplink TBF UPTHDCSUPGRAD Threshold from E2 CS2 to CS3 Uplink TBF UPTHDCSUPGRAD Threshold from E3 CS3 to CS4 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 ADD IPLOGICPOR T(Optional) Upper number of the logical port If the difference between uplink receive levels of calls within the SET same timeslot is greater than GCELLCHMG "Offset of the difference between AD(Optional) uplink received levels" for P After the existing uplink receive level, uplink receive level after the SET previous optimization, and the GCELLCHMG value of this parameter are weightAD(Optional) averaged, the uplink receive level If the difference between uplink receive levels of calls within the SET same timeslot is greater than GCELLCHMG "Offset of the difference between AD(Optional) uplink received levels" forwhether This parameter specifies P the transmission of point-to-point SET short messages is disabled. If GCELLCCAD( necessary, the transmission of the Optional) uplink of releasing the non- specific Delay short messages in a SET extended uplink TBF. After GCELLPRIVA receiving the last uplink RLC data TEOPTPARA( block (CountValue=0), the network Optional) side sends the message Packet the Retransmission threshold when coding mode of the uplink TBF is SET changed from CS2 to CS1. When GCELLPSCS( the retransmission rate of the Optional) uplink TBF is greater than when the Retransmission threshold or equal coding mode of the uplink TBF is SET changed from CS3 to CS2. When GCELLPSCS( the retransmission rate of the Optional) uplink TBF is greater than when the Retransmission threshold or equal coding mode of the uplink TBF is SET changed from CS4 to CS3. When GCELLPSCS( the retransmission rate of the Optional) uplink TBF is greater than when the Retransmission threshold or equal coding mode of the uplink TBF is SET changed from CS1 to CS2. When GCELLPSCS( the retransmission rate of the Optional) uplink TBF is less than or equal to Retransmission threshold when the coding mode of the uplink TBF is SET changed from CS2 to CS3. When GCELLPSCS( the retransmission rate of the Optional) uplink TBF is less than or equal to Retransmission threshold when the coding mode of the uplink TBF is SET changed from CS3 to CS4. When GCELLPSCS( the retransmission rate of the Optional) uplink TBF is less than or equal to Cell Urgent URGENTRESELALL Reselection OW Allowed BSC6900 USERIDTYPE User Query Type BSC6900 Support USF Granularity 4 Switch USFGRAN4BLK BSC6900 USR User Name of FTP Server BSC6900 USR FTPServer User Energy Saving Start Time[HH:MM] Energy Saving End Time[HH:MM] Upper Temperature Threshold BSC6900 Whether to allow cell urgent reselection. If this parameter is set SET to PERMIT and [NC2 Load GCELLNC2P Reselection Switch is set to ARA(Optional) Support, the load of the target cell CHK INNSPCH(Ma ndatory) STR Mode of querying the information CALLRESLOP on an MS SET BSCPSSOFT PARA(Optiona Whether to support USF granularity l) 4 DLD LICENSE(Man datory) ULD LICENSE(Man User name of the FTP server DLD RETANTCFG( User name for the FTP server. Mandatory) When the FTPServer.exe file ULD downloaded through the LMT is BTSDEVFILE( installed, the user name is admin. SET Start time when the TRX energy BTSDOMUBP saving function is enabled for the (Mandatory) BTS3002E. SET BTSDOMUBP (Mandatory) SET BTSEXD(Opti onal) SET GCELLHOIUO (Optional) SET GCELLHOIUO (Optional) SET GCELLHOIUO (Optional) SET GCELLHOIUO (Optional) End time when the TRX energy saving function is enabled for the BTS3002E. Upper temperature threshold for the environment alarm box to report an alarm indicating that the ambient temperature is too high. If the ambient subcell-OL subcel When a UL temperature of the handover decision is performed to a call, the BSC determines whether the number of handover failures reaches MS "MaxRetry Time after After an the performs a OL subcell to UL subcell handover successfully, the MS cannot be handed over to the OL subcell again within the value of the One of the parameters that determine the coverage of the OL subcell and of the UL subcell. "UtoO HO Received Level Threshold", "OtoU HO Received When this parameter is set to YES, the existing call is performed in the OL subcell, and "OL to UL HO Allowed" is set to YES, an OL subcell to UL subcell handover is USTBGNTIME BSC6900 USTENDTIME BSC6900 UTEMTHD BSC6900 UTOOFAILMAXTIM MaxRetry Time E after UtoO Fail BSC6900 Penalty Time of UTOOHOPENTIME UtoO HO UtoO HO Received Level Threshold BSC6900 UTOORECTH BSC6900 UTOOTRAFHOALL UtoO Traffic HO OW Allowed BSC6900 UTRAFHOPERIOD Underlay HO Step Period BSC6900 Hierarchical handover period of the load handover from the UL subcell SET to the OL subcell. If the channel GCELLHOIUO seizure ratio of the UL subcell is (Optional) greater than the UL subcell general SET Hierarchical level step of the load GCELLHOIUO handover from the UL subcell to (Optional) the OL subcell This parameter specifies the type ADD of a 3G cell. A cell type can be GEXT3GCEL Frequency Division Duplex (FDD) L(Mandatory) or Time Division Duplex (TDD). ADD BTSRETANT( Mandatory) Vendor code of specifies antenna This parameter the RET the usage threshold of the CPU for VIP user SET calls that can be admitted. When BSCFCPARA( the usage of a CPU is greater than Optional) this threshold, the new service ADD GCELL(Option Is VIP Cell.The parameter is used al) for BSC6900 flow control.the This parameter specifies eMLPP priority value SET corresponding to the VIP call. BSCFCPARA( When the eMLPP(Enhanced MultiOptional) Levelparameter specifies the usage This Precedence and Pre-emption threshold of the CPU for VIP user SET calls that are transferred from other BSCFCPARA( CPUs. When the usage of a CPU Optional) is the parameter is set to Disable, If greater than this threshold, the the added IP path is not configured ADD with the VLAN ID. If the parameter IPPATH(Optio is set to Enable, the added IP path nal) is configured with the VLAN ID. SET BSCABISPRI MAP(Optional) Specified Vlan enabling flag ADD SCTPLNK(Opt VLANID flag of first local IP ional) address ADD SCTPLNK(Opt VLANID Flag of second Local IP ional) address UTRAFHOSTEP Underlay HO Step Level BSC6900 UTRANCELLTYPE Utran Cell Type BSC6900 VENDORCODE Vendor Code BSC6900 VIPACCESSCPURA VIP Access CPU TE Rate BSC6900 VIPCELL VIP Cell BSC6900 VIPPRIORITY VIP Priority BSC6900 VIPSHAREINCPUR VIP Share in ATE CPU Rate BSC6900 VLANFlAG VLANID Flag BSC6900 VLANFLAG Vlan Flag VLANID Flag of First Local IP address VLANID Flag of Second Local IP address BSC6900 VLANFLAG1 BSC6900 VLANFlAG2 BSC6900 VLANID VLAN ID. BSC6900 ADD IPPATH(Mand atory) ADD VLANID of the IP address of the VLANID(Mand specified next hop ADD ETHMA(Mand atory) VLAN of the MA in the MD SET BTSVLAN(Opt ional) VLAN ID of the service type ADD BTSETHMA( Mandatory) VLAN to which the maintenance association belongs in the maintenance domain. VLANID VLAN ID BSC6900 VLANID VLAN ID BSC6900 VLANID VLAN ID BSC6900 VLANID1 VLAN ID of First Local IP address BSC6900 VLAN ID of Second Local IP address ADD SCTPLNK(Ma ndatory) VLAN ID of first Local IP address ADD SCTPLNK(Ma VLAN ID of second Local IP ndatory) address SET DSCPMAP(O ptional) VLAN priority level of the service type. This parameter helps to SET determine the packet service BTSVLAN(Opt priority level at the data link layer ional) on the Ethernet. If this parameter is SET BTSVLAN(Opt ional) VLAN switch for the service type SET GCELLCCAC CESS(Optiona l) Speech version supported by a cell ADD EMU(Optional ) 24V voltage alarm switch ADD EMU(Optional Upper limit for triggering a 24 V ) voltage sensor alarm VLANID2 BSC6900 VLANPRI VLAN Priority BSC6900 VLANPRI VLAN Priority BSC6900 VLANSWITCH VLAN Switch BSC6900 VOICEVER Speech Version BSC6900 VOL24_MASK Enable Alarm Reporting for 24V Power BSC6900 Upper Limit of Alarm for 24V Power VOL24_THD_HIGH BSC6900 VOL24_THD_LOW Lower Limit of Alarm for 24V Power BSC6900 ADD EMU(Optional Lower limit for triggering a 24 V ) voltage sensor alarm ADD EMU(Optional ) 48V voltage alarm switch ADD EMU(Optional Upper limit for triggering a 48V ) voltage sensor alarm ADD EMU(Optional Upper limit for triggering a 48V ) voltage sensor alarm SET Whether to enable the standing BTSDFCUBP( wave alarm parameters to be Optional) configured This parameter specifies a condition for generating a BTS SET alarm. This parameter together GCELLOTHE with "VSWR TRX error threshold" XT(Optional) is used to detect whether the SET BTSDFCUBP( Optional) SET Filtering times of serious standing BTSDDPUBP( wave alarms alarm threshold. SET Standing wave BTSDFCUBP( When the VSWR is greater than Optional) the value of this parameter, the SET TRX reports a standing wave BTSDDPUBP( alarm. standing wave alarm SET Serious BTSDFCUBP( threshold. When the VSWR is Optional) greater than the value of this SET parameter, the TRX reports a BTSDDPUBP( serious standing wave alarm. This parameter specifies a condition for generating a BTS SET alarm. This parameter together GCELLOTHE with "VSWR TRX unadjusted XT(Optional) threshold" are used to check SET BTSAUTODL DACTINFO(M V-version number of the BTS andatory) software is used to set the time of This timer waiting for a ReleaseIndication SET message after a ChannelRelease GCELLTMR( message is sent. If the timer Optional) expires, the channel is deactivated. VOL48_MASK Enable Alarm Reporting for 48V Power BSC6900 Upper Limit of Alarm for 48V Power Lower Limit of Alarm for 48V Power Standing Wave Alarm CFG Enabled VSWR TRX Unadjusted Threshold VOL48_THD_HIGH BSC6900 VOL48_THD_LOW BSC6900 VSWRENABLED BSC6900 VSWRERRTHRES BSC6900 Serious VSW VSWRFILETERCOU Alarm Filter NTER Times Standing Wave Radio Alarm Threshold BSC6900 VSWRTHRES1 BSC6900 VSWRTHRES2 Serious VSW Alarm Threshold BSC6900 VSWRUNJUSTTHR VSWR TRX Error ES Threshold BSC6900 VVer V-Version No. BSC6900 WAITFORRELIND T3109 BSC6900 Wait for REL WAITFORRELINDA Indication AMR MRFR FR BSC6900 WAITFORRELINDA T3109 for AMR MRHR HR Timer of MS Location WaitMSLocationRes Response from ponse MS Timer of WAITRESVCHANR Reserved TCH EFRESHTIMER for EMC IBCA Wait WAITSDCCHIDLETI SDCCH Idle MER Timer Timer of MS Location WaitSMLCLocationR Response from esponse SMLC BSC6900 BSC6900 BSC6900 BSC6900 BSC6900 WARMSET Heating Equipment BSC6900 When the BSC6900 sends a ChannelRelease message and the SET current call uses the AMRFR GCELLTMR( encoding mode, the timer T3109 Optional) (AMRFR) is started. If a When the BSC sends the ChannelRelease message and the SET current call uses the AMRHR GCELLTMR( encoding mode, the timer T3109 Optional) (AMRHR) is started.thethe BSC Timer of waiting for If MS's response to the location ADD measurement request sent from GEXTSMLC( the BSC. If the BSC does not Optional) receive thereserved for the The TCHs measurement emergency call are assigned to the SET user during the service GCELLTMR( assignment. If the TCHs are not Optional) assigned to the emergency call to When the dynamic PDCH needs use MAIO of the SDCCH, the SET SDCCH is not allowed to be GCELLCHMG assigned to new calls within the AD(Optional) value of the parameter. SMLC's Timer of waiting for the After the response to the MS location ADD request sent from the MSC. If the GEXTSMLC( SMLC does not send any response Optional) to the MSto start the heating Whether location request before equipment of the BTS. SET In multi-mode scenario, the value BTSOUTPUT( of this parameter in this mode must Optional) be the same as the value of the ADD EMU(Optional ) Water sensor alarm switch Whether to limit the operation weekday of the operator. If the ADD weekday needs to be limited, see OP(Optional) the description of "Week". SET This parameter is used to select GCELLLCS(O the location of a cell, east or west ptional) longitude. start the humidification Whether to equipment of the BTS. SET In multi-mode scenario, the value BTSOUTPUT( of this parameter in this mode must Optional) be the same as thean Whether to trigger value of the active/standby port switchover. If STR this parameter is set to YES, an IPCHK(Option active/standby port switchover is al) triggered when a fault is detected WATER_MASK Enable Water Alarm Reporting BSC6900 WEEK Week Limit BSC6900 WELONGI WE Longitude BSC6900 WETSET Humidification Equipment BSC6900 WHETHERAFFECT Whether affect SWAP the port swapping BSC6900 WINADJSWITCH LAPD Window Adjust Switch BSC6900 Whether to start the dynamic adjustment of the LAPD window. If SET this parameter is set to ALLOW, OTHSOFTPA the LAPD transmit and receive RA(Optional) window is enlarged when the delay ADD OP(Mandatory ) You can select multiple weekdays. Working mode of the M3UA link ADD set, including M3UA_ASP and M3LKS(Option M3UA_IPSP. For details about the al) ASP and IPSP, BTS the RFC4666. Time when the see stops checking for a radio link alarm. If this time is SET up, the BTS stops checking for or GTRXRLALM( reporting a radio link alarm until the Optional) next alarm detection start time is Whether to enable the BTS to report a major radio link alarm. If SET this parameter is set to YES, the GTRXRLALM( BTS reports a major radio link Optional) alarm when a radioalink warning is Period for clearing radio link warning. If a radio link warning is SET cleared within this period, the BTS GTRXRLALM( reports the recovery alarm for the Optional) warning. If a radio link warning is Time when the BTS starts to check SET for a radio link alarm. If this time is GTRXRLALM( up, the BTS starts to check for and Optional) report a radio link alarm. Whether to enable the BSC to deliver radio link alarm parameters SET to the BTS. If this parameter is set GTRXRLALM( to YES, the BSC delivers the radio Mandatory) link alarm parameters to the BTS. FMT DATA(Optiona flag of the work area to be l) formatted. SET BTSRXUBP(O ptional) Working mode of the RXU board ADD SUBRACK(Ma ndatory) Work mode of subrack E1 system Working mode. E1: The is recommended by the IUT-T. E1 SET carries signals at 2.048 Mbit/s. E1T1(Optional G.703 defines the electrical ) specification and G.704 defines the WK Week BSC6900 WKMODE Work mode BSC6900 WLAETIME End Time of WLA Detection BSC6900 Wireless Link Alarm Critical Permit WLAFLAG BSC6900 WLARP WLA Prompting Recover Period BSC6900 WLASTIME Begin Time of WLA Detection BSC6900 WLNKALMFLAG Wireless Link Alarm Flag BSC6900 WORKAREA Work Area Flag BSC6900 WORKINGSTANDA Working RD Standard BSC6900 WORKMODE Work Mode BSC6900 WORKMODE Work Mode BSC6900 WORKMODE Work Mode BSC6900 WS Window Size BSC6900 WTBS Wait Time before OML Switch BSC6900 WTBS Ring I Wait Time Before Switch BSC6900 Bts port working mode. This parameter must be consistent with that of the peer. Work mode of a ADD BTS. A BTS can work in the BTS(Optional) following modes: ADD ATERSL(Opti onal) ADD Window size of the Ater signaling ATERCONSL( link for which the BTS waits to Time swap the OML after the OML is SET interrupted. With this parameter, BTSOMLBAC the BTS does not swap the OML KUP(Optional) when the OML is interrupted Waiting time before establishing a SET link in the reverse direction after BTSRINGATT the transmission of a BTS is R(Optional) disrupted WTRT WTR Time[Sec] BSC6900 SET MSP(Optional) Wait to restore time ZONET TimeZone BSC6900 SET TZ(Optional) Time zone Feature IDFeature Name Value Type GUI Value Range Actual Value Range Unit GBFD110502 GBFD110502 GBFD110502 Assignment and Immediate Assignment Interval Type 0~70 Assignment and Immediate Assignment Interval Type 0~70 Assignment and Immediate Assignment Interval Type 10~80 0~70 None 0~70 None 1~8, step:0.1 s GBFD116601 Abis Bypass Enumeration TRUE(Support), Type FALSE(Not Support) TRUE, FALSE None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Interval Type 10~255 10~255 s GBFD111705 GSM Flow Control GBFD114201 EGPRS Interval Type 10~255 IDLETSALLOC_0(Any idle timeslots under the same site), Enumeration IDLETSALLOC_1(Idle Type timeslots on same E1 10~255 IDLETSALLOC_0, IDLETSALLOC_1, IDLETSALLOC_2, IDLETSALLOC_3 s None GBFD114201 EGPRS Enumeration CLOSE(CLOSE), Type OPEN(OPEN) CLOSE, OPEN None GBFD117702 BTS Local Switch Interval Type 0~100 0~100 per cent GBFD117301 Flex Abis Enumeration Type NO(NO), YES(YES) NO, YES None GBFD113101 PDCH Dynamic Adjustment Interval Type 10~3600 10~3600 s MRFD210301 Configuratio n GSM_PHASE_1, Manageme Enumeration GSM_PHASE_2, nt Type GSM_PHASE_2Plus SoftSynchroniz ed Network Interval Type 1~255 Voice Quality Index (Uplink VQI) Interval Type 0~250 GSM_PHASE_1, GSM_PHASE_2, GSM_PHASE_2Plus None GBFD118201 1~255 None GBFD116801 0~250 None GBFD119110 Access Enumeration 8BIT(8BIT), Type 11BIT(11BIT) 8BIT, 11BIT None GBFD119110 Access GBFD113201 GBFD119501 GBFD118611 GBFD118622 Interval Type 0~65535 OSubcell(Overlaid subcell), USubcell(Underlaid Concentric Enumeration subcell), NoPrefer(No Cell Type preference) Adaptive ULPRIORITY(Uplink Adjustment Priority), of Uplink NEUTRAL(Neutral and Enumeration Priority), Downlink Type DLPRIORITY(Downlin Abis IP over E1/T1 A IP over Enumeration Disable(Disable), E1/T1 Type Enable(Enable) 0~65535 None OSubcell, USubcell, NoPrefer None ULPRIORITY, NEUTRAL, DLPRIORITY None Disable, Enable None GBFD118611 Abis IP over Enumeration E1/T1 Type NO(No), YES(Yes) BSS Paging Coordinatio Enumeration CLOSE(Close), n Type OPEN(Open) COMPUL0(Compulsor Basic Cell y 0), ReEnumeration COMPUL1(Compulsor selection Type y 1), FLEX(Flexible) 4_75KBIT/S~0 5_15KBIT/S~1 5_90KBIT/S~2 6_70KBIT/S~3 AMR FR Bit Field Type 7_40KBIT/S~4 NO, YES None GBFD119305 CLOSE, OPEN None GBFD110402 GBFD115501 COMPUL0, COMPUL1, FLEX None 4_75KBIT/S, 5_15KBIT/S, 5_90KBIT/S, 6_70KBIT/S, 7_40KBIT/S, 7_95KBIT/S, 10_2KBIT/S, 12_2KBIT/S None GBFD115502 AMR HR 4_75KBIT/S~0 5_15KBIT/S~1 5_90KBIT/S~2 6_70KBIT/S~3 Bit Field Type 7_40KBIT/S~4 6_60KBIT/S, 8_85KBIT/S, Bit Field Type 12_65KBIT/S 4_75KBIT/S, 5_15KBIT/S, 5_90KBIT/S, 6_70KBIT/S, 7_40KBIT/S, 7_95KBIT/S None GBFD115507 WB AMR 0~7 None GBFD110501 Enumeration Call Control Type NO(No), YES(Yes) SoftSynchroniz ed Network Interval Type 1~255 NO, YES None GBFD118201 1~255 min GBFD111202 O&M of BTS Interval Type 60~300 60~300 V GBFD111202 O&M of BTS Interval Type 610~3000 61.0~300.0 (step: 0.1) V GBFD111202 O&M of BTS Interval Type 600~2990 60.0~299.0 (step: 0.1) V GBFD111202 GBFD110601 GBFD510501 O&M of BTS Interval Type 60~300 HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) 60~300 V NO, YES None GBFD111202 O&M of BTS Interval Type 0~254 0~254 None GBFD111705 GSM Flow Control Interval Type 0~50 0~50 ms GBFD111705 GSM Flow Control Interval Type 0~768 0~768 None GBFD111804 A Interface Protocol Process Interval Type 1~16777215 SoftSynchroniz ed Network Dynamically Adjusting the Uplink MCS Coding 1~16777215 None GBFD118201 GBFD119204 BYMANUAL(By Enumeration Manual), BYAUTO(By Type Auto) support dynamic BYMANUAL, BYAUTO 0(Not adjustment), 1(According to Enumeration downlink quality Type measurements 0, 1, 2 None None GBFD111202 O&M of BTS GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type OFF(OFF), ON(ON) COMMON_DLD(Com mon Download), QUICK_DLD1(Quick Enumeration Download No Traffic), Type QUICK_DLD2(Quick LOCK(Lock), UNLOCK(Unlock), Enumeration SHUTDOWN(Shutdow Type n) Lock(Lock), Enumeration Unlock(Unlock), Type Shutdown(Shutdown) Lock(Lock), Enumeration Unlock(Unlock), Type Shutdown(Shutdown) OFF, ON COMMON_DLD, QUICK_DLD1, QUICK_DLD2 None None Lock, Unlock, Shutdown None GBFD111202 O&M of BTS Lock, Unlock, Shutdown None GBFD111202 O&M of BTS Lock, Unlock, Shutdown None GBFD118201 SoftSynchroniz Compound ed Network Type hour, min hour{0~23} min{0~59} None GBFD118201 SoftSynchroniz ed Network Interval Type 0~100 SoftSynchroniz Enumeration ed Network Type OFF(OFF), ON(ON) SoftSynchroniz Compound ed Network Type 0~100 None GBFD118201 OFF, ON None GBFD118201 hour, min hour{0~23} min{0~59} None MRFD210304 Faulty Manageme Enumeration RATIORULE(Ratio nt Type Rule) RATIORULE None GBFD111202 O&M of BTS String Type None 1~51 characters None GBFD111202 GBFD115602 GBFD115602 GBFD115602 GBFD115602 GBFD115602 GBFD115602 GBFD115602 GBFD115602 O&M of BTS Acoustic Echo Cancellatio n(AEC) Acoustic Echo Cancellatio n(AEC) Acoustic Echo Cancellatio n(AEC) Acoustic Echo Cancellatio n(AEC) Acoustic Echo Cancellatio n(AEC) Acoustic Echo Cancellatio n(AEC) Acoustic Echo Cancellatio n(AEC) Acoustic Echo Cancellatio n(AEC) AMR Wireless Link Timer String Type None 1~51 characters None Interval Type 0~600 0~600 ms Interval Type 0~60 0~60 dB Interval Type -60~-35,0 -60~-35, 0 dBm Interval Type 0~1000 0~1000 ms Interval Type 0~15 0~15 dB Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Interval Type 10~100 10~100 None GBFD115505 Interval Type 1~10 4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, Enumeration 28_Times, 32_Times, Type 36_Times, 40_Times, 1~10 s 1920~30720, step:480 ms GBFD115505 AMR Wireless Link Timer Interval Type 0~63 0~30240, step:480 ms None None Interval Type 0~65534 0~65534 None None None AMR Wireless Link Timer AMR Wireless Link Timer GBFD115505 Enumeration Type BSC(BSC) 4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, Enumeration 28_Times, 32_Times, Type 36_Times, 40_Times, BSC None 1920~30720, step:480 ms GBFD115505 Interval Type 0~63 0~30240, step:480 ms MRFD210304 Faulty Manageme nt Interval Type 65334~65383 Faulty Manageme nt Interval Type 1~65535 Faulty Manageme nt Interval Type 1~65535 Faulty Manageme nt Interval Type 1~65535 Faulty Manageme nt Interval Type 1~65535 65334~65383 None MRFD210304 1~65535 None MRFD210304 1~65535 None MRFD210304 1~65535 None MRFD210304 1~65535 None GBFD111202 O&M of BTS Interval Type 65033~65533 65033~65533 None MRFD210304 Faulty Manageme nt String Type None 1~1024 characters None GBFD113801 TRX Cooperation Interval Type 1~60 Faulty ALL(All), Manageme Enumeration ONEBYONE(One by nt Type One) Faulty Manageme nt End-to-End MS Signaling Tracing ALL(all), Enumeration ONEBYONE(one by Type one) 1~60 min MRFD210304 ALL, ONEBYONE None MRFD210304 ALL, ONEBYONE None GBFD116401 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type ABIS(Abis), A(A) ABIS, A None GBFD111705 GSM Flow Control Interval Type 0~100 0~100 per cent GBFD111705 GSM Flow Control Interval Type 0~100 0~100 per cent GBFD111705 GSM Flow Control Interval Type 0~100 0~100 per cent GBFD111705 GSM Flow Control Interval Type 0~100 0~100 per cent GBFD111705 GSM Flow Control Interval Type 0~100 0~100 per cent GBFD111705 GSM Flow Control GBFD118602 GBFD115601 GBFD115601 GBFD115601 GBFD115601 GBFD115601 GBFD115601 GBFD115601 A over IP Automatic Level Control (ALC) Automatic Level Control (ALC) Automatic Level Control (ALC) Automatic Level Control (ALC) Automatic Level Control (ALC) Automatic Level Control (ALC) Automatic Level Control (ALC) Interval Type 0~100 Supported), 0~100 NO(Not R3(Only R3 Supported), R2(Only Enumeration R2 Supported), Type R2ANDR3(R2 And R3 NO, R3, R2, R2ANDR3 per cent None Interval Type -12~12 -12~12 dB Interval Type -23~-4 -23~-4 dBm Interval Type 3~12 3~12 dB Interval Type -23~-4 -23~-4 dBm Interval Type -23~-4 -23~-4 dBm FIXEDLEVEL(Fixed level mode), ADAPTIVE(Adaptive Enumeration mode), FIXEDLEVEL, ADAPTIVE, Type FIXEDGAIN(Fixed gain FIXEDGAIN None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD510002 Gb Over FR Interval Type 5~15 5~15 None GBFD510002 Gb Over FR Interval Type 1~255 1~255 s GBFD118605 IP QOS Interval Type 0~4000000 0~4000000 kbit/s GBFD114101 GPRS PDCH Dynamic Adjustment Enhanced Channel Assignment Algorithm Extended Dynamic Allocation(E DA) NetworkControlled Cell Reselection (NC2) Enhanced Channel Assignment Algorithm A Interface Circuit Manageme nt Enumeration NOTALLOW(Not Type Allow), ALLOW(Allow) NOTALLOW, ALLOW None GBFD113101 Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111005 Interval Type 0~100 0~100 per cent GBFD119401 Enumeration NOTALLOW(Not Type Allow), ALLOW(Allow) NOTALLOW, ALLOW None GBFD116201 Interval Type 0~16 0~16 None GBFD111005 GBFD111803 GBFD111203 O&M of BSC Interval Type 0~100 ALLCIC(Set all Timeslots CIC), Enumeration ALLNULL(Set all Type Timeslots Null) ALLCIC(Set all Timeslots CIC), Enumeration ALLNULL(Set all Type Timeslots Null) 0~100 per cent ALLCIC, ALLNULL None ALLCIC, ALLNULL None MRFD210304 Faulty Manageme nt Interval Type 0~2000 0~2000 mA MRFD210304 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~65535 Faulty Manageme Enumeration nt Type NO(NO), YES(YES) Faulty Manageme nt Interval Type 0~65534 Faulty Manageme nt Interval Type 0~65535 Faulty Manageme nt Interval Type 0~15 Faulty Manageme nt Interval Type 45~155 Faulty Manageme nt Interval Type 125~175 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~65535 s MRFD210304 NO, YES None MRFD210304 0~65534 None MRFD210304 0~65535 None MRFD210304 0~15 mA MRFD210304 45~155 mA MRFD210304 125~175 mA MRFD210304 Faulty Manageme nt Interval Type 0~65535 Faulty Manageme nt Interval Type 0~100 Faulty Manageme nt Interval Type 0~100 Faulty Manageme nt Interval Type 0~250 Faulty Manageme nt Interval Type 0~250 Faulty Manageme Enumeration nt Type NO(NO), YES(YES) Faulty Manageme Enumeration flt(Fault), evt(Event), nt Type all(All) 0(0.0), 1(0.1), 2(0.2), 3(0.3), 4(0.4), 5(0.5), Power Enumeration 6(0.6), 7(0.7), 8(0.8), Control Type 9(0.9), 10(1.0) BSS-Based LCS (Cell ID + TA) Interval Type 0~9 0~65535 s MRFD210304 0~100 per cent MRFD210304 0~100 per cent MRFD210304 0~250 None MRFD210304 0~250 None MRFD210304 NO, YES None MRFD210304 flt, evt, all None GBFD119115 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 None GBFD115402 0~0.9, step:0.1 m None None Interval Type -1000~10000 -1000~10000 m GBFD115402 BSS-Based LCS (Cell ID + TA) Interval Type 0~6553 0~6553 m None None Interval Type -3281~32810 -3281~32810 feet MRFD210304 MRFD210304 Faulty Manageme Critical, Major, Minor, nt Bit Field Type Warning Critical(Critical), Faulty Major(Major), Manageme Enumeration Minor(Minor), nt Type Warning(Warning) Critical, Major, Minor, Warning None Critical, Major, Minor, Warning None GBFD111202 O&M of BTS Enumeration DISABLED(Disabled), DISABLED, Type ENABLED(Enabled) ENABLED None GBFD111202 O&M of BTS Enumeration DISABLED(Disabled), DISABLED, Type ENABLED(Enabled) ENABLED None GBFD111202 O&M of BTS Enumeration DISABLED(Disabled), DISABLED, Type ENABLED(Enabled) ENABLED None GBFD111202 O&M of BTS Enumeration DISABLED(Disabled), DISABLED, Type ENABLED(Enabled) ENABLED None GBFD111202 O&M of BTS Enumeration DISABLED(Disabled), DISABLED, Type ENABLED(Enabled) ENABLED None GBFD111202 O&M of BTS Enumeration DISABLED(Disabled), DISABLED, Type ENABLED(Enabled) ENABLED None GBFD115503 GBFD117601 GBFD115506 AMR Power Control HUAWEI III Power Control Algorithm AMR Coding Rate Threshold Adaptive Interval Type 1~16 2~32, step:2 dB Enumeration OFF(Not Allowed), Type ON(Allowed) OFF, ON None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD115503 AMR Power Control Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms GBFD115503 AMR Power Control Interval Type 0~3 0~3 None GBFD115503 AMR Power Control Interval Type 0~7 0~7 None GBFD115503 AMR Power Control Interval Type 0~7 0~7 None GBFD115503 AMR Power Control Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms GBFD115503 AMR Power Control Interval Type 0~7 0~7 None GBFD115503 AMR Power Control Interval Type 0~63 0~63 dB GBFD115503 AMR Power Control Interval Type 0~63 0~63 dB GBFD115503 AMR Power Control Interval Type 0~63 0~63 dB GBFD510501 HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~7 0~7 None GBFD510501 HUAWEI II Handover Interval Type 0~100 0~100 per cent GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Handover Interval Type 0~7 0~7 None GBFD510501 HUAWEI II Handover Interval Type 0~100 0~100 per cent GBFD115503 AMR Power Control Interval Type 0~32 0~32 dB GBFD115503 AMR Power Control Interval Type 0~30 0~30 dB GBFD115503 AMR Power Control Interval Type 0~30 0~30 dB GBFD115503 AMR Power Control Interval Type 0~30 0~30 dB GBFD115503 AMR Power Control Interval Type 0~32 0~32 dB GBFD115503 AMR Power Enumeration Control Type NO(No), YES(Yes) NO, YES None GBFD115503 AMR Power Control Interval Type 1~15 480~7200, step:480 ms GBFD115503 GBFD110703 AMR Power Control Interval Type 0~4 Enhanced Power Control Algorithm Interval Type 0~15 0~4 dB 0~15 None GBFD115502 AMR HR Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD115502 GBFD115506 AMR HR Coding Rate Threshold Adaptive Interval Type 0~99 0~99 per cent Enumeration Type NO(No), YES(Yes) NO, YES None GBFD115503 AMR Power Control Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms GBFD115503 AMR Power Control Interval Type 0~3 0~3 None GBFD115503 AMR Power Control Interval Type 0~7 0~7 None GBFD115503 AMR Power Control Interval Type 0~7 0~7 None GBFD115503 AMR Power Control Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms GBFD115503 AMR Power Control Interval Type 0~7 0~7 None GBFD115503 AMR Power Control Interval Type 0~63 0~63 dB GBFD115503 AMR Power Control Interval Type 0~63 0~63 dB GBFD115503 GBFD111803 GBFD111803 GBFD115603 GBFD115603 GBFD115603 AMR Power Control A Interface Circuit Manageme nt A Interface Circuit Manageme nt Automatic Noise Restraint (ANR) Automatic Noise Restraint (ANR) Automatic Noise Restraint (ANR) Remote Electrical Tilt Interval Type 0~63 0~63 dB Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 3~30 3~30 dB Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Interval Type 10~30 10~30 dB MRFD210602 String Type None 1~5 characters None GBFD118605 IP QOS Interval Type 0~4599 0~4599 None None None Faulty Manageme nt Automatic Noise Restraint (ANR) Automatic Noise Restraint (ANR) Automatic Noise Restraint (ANR) Automatic Noise Restraint (ANR) Interval Type 0~4599 0~4599 None MRFD210304 String Type None 1~100 characters None GBFD115603 MODE0(Mode 0), Enumeration MODE1(Mode 1), Type MODE2(Mode 2) MODE0, MODE1, MODE2 None GBFD115603 Interval Type -32~0 -32~0 dB GBFD115603 Interval Type -64~0 -64~0 dB GBFD115603 Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD115402 BSS-Based LCS (Cell ID + TA) Interval Type 0~360 BTS GPS Synchroniz ation Interval Type 0~1000 SENDPOWER(Send BTS GPS Power), Synchroniz Enumeration NOPOWER(No ation Type Power) Abis IP over E1/T1 A IP over Enumeration E1/T1 Type OFF(OFF), ON(ON) 0~360 degree GBFD510401 0~1000 m GBFD510401 GBFD118611 GBFD118622 SENDPOWER, NOPOWER None OFF, ON None GBFD111202 O&M of BTS Remote Electrical Tilt Enumeration Type NO(No), YES(Yes) NO, YES None MRFD210602 Interval Type 0~35 0~35 None GBFD111202 O&M of BTS Enumeration Type A(A), B(B) A, B None GBFD510104 Multi-site Cell Enumeration Type A(A), B(B) A, B None GBFD111202 O&M of BTS Enumeration A(A), B(B), Type NULL(NULL) A, B, NULL None GBFD111804 A Interface Protocol Process Interval Type 0~335 0~335 None GBFD118602 A over IP SemiPermanent Connection PS Active Queue Manageme nt PS Active Queue Manageme nt PS Active Queue Manageme nt PS Active Queue Manageme nt PS Active Queue Manageme nt PS Active Queue Manageme nt Enumeration M3UA(M3UA), Type BBAP(BBAP) MTP2(MTP2), Enumeration OTHER(OTHER), Type TCSTM1(TCSTM1) M3UA, BBAP None GBFD114701 MTP2, OTHER, TCSTM1 None GBFD119904 Interval Type 1~65535 1~65535 packet GBFD119904 Interval Type 1~65535 1~65535 bit GBFD119904 Interval Type 1~65535 1~65535 bit GBFD119904 Interval Type 1~65535 1~65535 packet GBFD119904 Interval Type 1~65535 1~65535 packet GBFD119904 Interval Type 1~65535 1~65535 packet GBFD119904 GBFD119904 MRFD210301 MRFD210401 MRFD210401 GBFD111004 GBFD111004 GBFD111004 PS Active Queue Manageme nt PS Active Queue Manageme nt Configuratio n Manageme nt BSC/RNC Software Manageme nt BSC/RNC Software Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Interval Type 1~65535 1~65535 bit Interval Type 0~65535 PRIMARY(Primary Area), STANDBY(Standby Enumeration Area), ALL(Primary Type and Standby Area) 0~65535 None PRIMARY, STANDBY, ALL None Enumeration PRIMARY(Primary), Type STANDBY(Standby) PRIMARY, STANDBY None Interval Type 0~80 0~80 per cent Interval Type 5~126 5~126 None Interval Type 5~100 5~100 per cent None None Interval Type 3~10 3~10 None None None Interval Type 3~10 3~10 ms GBFD111804 A Interface Protocol Process Interval Type 0~27 A Interface Protocol Process Interval Type 0~27 0~27 None GBFD111804 0~27 None GBFD111804 MRFD210304 MRFD210304 GBFD110502 A Interface Protocol Process Interval Type 0~11 power, env, sig, trunk, Faulty hardware, software, Manageme run, comm, service, nt Bit Field Type handle power(Power System), env(Environment Faulty System), sig(Signaling Manageme Enumeration System), trunk(Trunk nt Type System), Assignment and Immediate Enumeration Assignment Type OFF(Off), ON(On) 0~11 power, env, sig, trunk, hardware, software, run, comm, service, handle power, env, sig, trunk, hardware, software, run, comm, service, handle None None None OFF, ON None GBFD110607 Enumeration DISABLE(Disable), Direct Retry Type ENABLE(Enable) DISABLE, ENABLE None GBFD113201 Concentric Cell Interval Type 0~61 0~61 dB GBFD111202 O&M of BTS Interval Type 0~62,255 0~62, 255 None GBFD111202 O&M of BTS Interval Type 0~62 0~62 None GBFD111202 O&M of BTS Interval Type 0~23,255 0~23, 255 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~254 0~254 None GBFD510901 GBFD110502 2G/3G Neighboring Cell Automatic Optimizatio Interval Type 0~63 Assignment and Immediate Assignment Interval Type 500~60000 0~63 dB 500~60000 ms GBFD111203 GBFD111803 O&M of BSC Interval Type 1~300 A Interface Circuit Manageme nt Interval Type 1~300 1~300 s 1~300 s GBFD111705 GSM Flow Control Interval Type 1~300 1~300 s GBFD111705 GSM Flow Control Interval Type 1~300 1~300 s GBFD111203 O&M of BSC Interval Type 1~300 1~300 s GBFD111203 GBFD111803 O&M of BSC Interval Type 1~300 A Interface Circuit Manageme nt Interval Type 1~300 1~300 s 1~300 s GBFD113201 Concentric Cell Enhanced Dual-Band Network Enhanced Dual-Band Network Enumeration NO(Close), Type YES(Open) NO, YES None GBFD114402 Interval Type 0~63 0~63 dB GBFD114402 Interval Type 0~63 0~63 dB GBFD116901 Flex Ater Enumeration Type NO(No), YES(Yes) NO, YES None GBFD116901 Flex Ater Enumeration Close(Close), Type Open(Open) Close, Open None GBFD116901 Flex Ater Interval Type 80~100 80~100 per cent GBFD111203 O&M of BSC Interval Type 0~254 0~254 None GBFD117701 BSC Local Switch GBFD111203 O&M of BSC SemiPermanent Connection Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~100 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, Bit Field Type TS15, TS16, TS17, 0~100 TS1, TS2, TS3, TS4, TS5, per cent TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD114701 Enumeration Type NO, YES NO, YES None MRFD210301 Interval Type 0~1 0~1 None MRFD210301 Interval Type 0~254 0~254 None GBFD111203 GBFD116902 O&M of BSC Interval Type 0~2047 Ater Compressio n Transmissio Enumeration n Type TDM(TDM), IP(IP) 0~2047 None TDM, IP None GBFD111202 O&M of BTS A(Tributary A), Enumeration B(Tributary B), ALL(All Type Tributary) A, B, ALL None GBFD111804 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, A Interface TS9, TS10, TS11, Protocol TS12, TS13, TS14, Process Bit Field Type TS15, TS16, TS17, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD110302 IMSI Detach Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Interval Type 0~15 0~15 dB GBFD111202 O&M of BTS Interval Type 0~15 0~15 dB None None Interval Type 1~65535 1~65535 min None None Security Manageme nt Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Interval Type 1~60 NONE(Verify None), Enumeration PEER(Verify Peer Type Certificate) 1~60 min MRFD210305 GBFD118611 GBFD118622 GBFD118611 GBFD118622 NONE, PEER None Enumeration SERVER(SERVER), Type CLIENT(CLIENT) SERVER, CLIENT None Enumeration SERVER(SERVER), Type CLIENT(CLIENT) SERVER, CLIENT None GBFD118611 GBFD118611 GBFD118622 GBFD118611 GBFD118622 Abis IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Enumeration SERVER(Server), Type CLIENT(Client) SERVER, CLIENT None String Type None 1~63 characters None String Type None 1~63 characters None GBFD118611 GBFD118611 GBFD118622 GBFD118611 GBFD118622 Abis IP over E1/T1 String Type Abis IP over E1/T1 A IP over E1/T1 String Type Abis IP over E1/T1 A IP over E1/T1 String Type None 1~64 characters None None 1~15 characters None None 1~15 characters None GBFD118611 GBFD118611 GBFD118622 GBFD118611 GBFD118622 Abis IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 String Type None 1~16 characters None NO_V(NO_V), Enumeration PAP_V(PAP_V), Type CHAP_V(CHAP_V) NO_V, PAP_V, CHAP_V None GBFD118611 NO_V(NO_V), Enumeration PAP_V(PAP_V), Type CHAP_V(CHAP_V) NO_V, PAP_V, CHAP_V NO_V(No Validate), PAP_V(PAP Validate), Abis IP over Enumeration CHAP_V(CHAP E1/T1 Type Validate) NO_V, PAP_V, CHAP_V None None None MRFD210301 Enumeration None Type ENABLE, DISABLE Configuratio n Manageme Enumeration nt Type NO(NO), YES(YES) ENABLE, DISABLE None NO, YES None GBFD115501 AMR FR Enumeration Type NO(No), YES(Yes) NO, YES None GBFD115502 AMR HR Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD118601 GBFD111202 Enumeration DISABLED(Disabled), Abis over IP Type ENABLED(Enabled) BTSAUTODLDACT(B DISABLED, ENABLED TS Software Auto DL and ACT), O&M of Enumeration TMUAUTOACT(TMU BTSAUTODLDACT, BTS Type Software Auto ACT) TMUAUTOACT Security Manageme Enumeration nt Type OFF(Off), ON(On) Security Manageme nt Interval Type 1~65535 None None MRFD210305 OFF, ON None MRFD210305 1~65535 min None None Enumeration Type AU4(AU4), AU3(AU3) AU4, AU3 GSM_PHASE_1, GSM_PHASE_2, GSM_PHASE_2Plus None GBFD111804 A Interface GSM_PHASE_1, Protocol Enumeration GSM_PHASE_2, Process Type GSM_PHASE_2Plus Faulty Manageme Enumeration LOW(LOW), nt Type HIGH(HIGH) Faulty Manageme Enumeration LOW(LOW), nt Type HIGH(HIGH) O1E3_R1E4(OCCUR: 1E-3, RECOVERY:1E4), Enumeration O1E4_R1E5(OCCUR: None Type 1E-4, RECOVERY:1EO1E3_R1E4(OCCUR: 1E-3, RECOVERY:1E4), Enumeration O1E4_R1E5(OCCUR: None Type 1E-4, RECOVERY:1EO1E4_R1E5(OCCUR: 1E-4, RECOVERY:1E5), Enumeration O1E5_R1E6(OCCUR: None Type 1E-5, RECOVERY:1EO1E4_R1E5(OCCUR: 1E-4, RECOVERY:1E5), Enumeration O1E5_R1E6(OCCUR: None Type 1E-5, RECOVERY:1E- None MRFD210304 LOW, HIGH None MRFD210304 None None None None LOW, HIGH O1E4_R1E5, O1E3_R1E4, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11, O1E3_R1E4, O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11, O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11 O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11 None None None None None MRFD210502 BSC/RNC Clock Enumeration Type OFF(OFF), ON(ON) OFF, ON None MRFD210502 GBFD111203 MRFD210305 MRFD210301 GBFD111004 BSC/RNC Clock of O&M BSC Security Manageme nt Configuratio n Manageme nt Radio Dedicated Channel Manageme nt Enumeration Type OFF(OFF), ON(ON) OFF, ON None String Type None 0~200 characters None String Type None 0~128 characters None GBFD114101 GPRS Interval Type 0~70 0~70 CLOSE(Close), LOCALTLLI(Local TLLI Enumeration Opt), ALLTLLI(All TLLI CLOSE, LOCALTLLI, Type Opt) ALLTLLI None None None None String Type None 1~64 characters None None None IP Address Type None 0.0.0.0~255.255.255.255 None None GBFD111605 GBFD111605 None Active Backup Power Control Active Backup Power Control Multi-band Sharing One BSC IP Address Type None 0.0.0.0~255.255.255.255 None BYTRX(Turn off TRX), Enumeration BYPWR(Reduce Type Backup Power) BYTRX, BYPWR BYCOVER(Cover Priority), BYCAP(Capability Enumeration Priority), BYCOVER, BYCAP, Type BYSAVING(Saving BYSAVING None None GBFD114401 Interval Type 0~1 0~1 None GBFD114401 Multi-band Sharing One BSC Interval Type 0~1 0~1 None GBFD114401 GBFD110601 GBFD510501 Multi-band Sharing One BSC Interval Type 0~1 HUAWEI I Handover HUAWEI II Handover Interval Type 1~200 0~1 None 1~200 s GBFD111202 O&M of BTS String Type None 1~80 characters None GBFD118201 GBFD111202 GBFD111202 SoftSynchroniz ed Network Interval Type 0~2047 Battery1Temp(Battery 1 Temperature), O&M of Enumeration Battery2Temp(Battery BTS Type 2 Temperature) Battery1Temp(Battery 1 Temperature), O&M of Enumeration Battery2Temp(Battery BTS Type 2 Temperature) 0~2047 None Battery1Temp, Battery2Temp None Battery1Temp, Battery2Temp None GBFD111202 O&M of BTS Interval Type 30~1000 30~1000 Ah GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Interval Type 0~90 NO_BAT(No Storage 0~90 Battery), INSIDE_BAT(Inside Enumeration Storage Battery), NO_BAT, INSIDE_BAT, Type OUTSIDE_BAT(Outsid OUTSIDE_BAT per cent None GBFD113725 BSC Node Redundanc y Interval Type 1024~65535 1024~65535 None GBFD110801 GBFD110802 Processing of Measureme nt Report PreInterval Type 0~254 0~254 None GBFD111202 MRFD210301 MRFD210301 MRFD210301 MRFD210301 O&M of BTS Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~3000 0~3000 Ah Interval Type 0~7 0~7 None Interval Type 0~7 0~7 None Interval Type 0~7 0~7 None Interval Type 0~1023 0~1023 None GBFD110101 GBFD113701 Frequency Band Frequency Hopping (RF hopping, baseband Interval Type 0~1023 0~1023 None Enumeration NO_Hop(No hop), Type Hop(Hop) NO_Hop, Hop None GBFD510002 Gb Over FR Interval Type 0~100 0~100 per cent GBFD510002 Gb Over FR Interval Type 0~100 0~100 per cent GBFD118603 Gb over IP Interval Type 0~63 0~63 None GBFD510002 Gb Over FR Interval Type 0~511 0~511 None GBFD111202 O&M of BTS Interval Type 5~25 5~25 per cent GBFD111202 O&M of BTS Interval Type 433~576 43.3~57.6 (step: 0.1) V GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP GBFD111804 Interval Type 1~10 MTP3(MTP3), A Interface M3UA(M3UA), Protocol Enumeration MTP3_M3UA(MTP3 Process Type and M3UA) BSC Node Redundanc y Interval Type 1~60 1~10 None MTP3, M3UA, MTP3_M3UA None GBFD113725 1~60 s GBFD114201 GBFD114302 GBFD114301 GBFD114302 EGPRS GSM/TDSCDMA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/TD- Interval Type 0~10 0~10 None Interval Type 0~3 0~3 None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD510501 GBFD118609 GBFD118609 GBFD110801 GBFD110802 HUAWEI II Handover IP Fault Detection Based on BFD IP Fault Detection Based on BFD Processing of Measureme nt Report Pre- Interval Type 1~32 0.5~16, step:0.5 s Interval Type 3~10 3~10 None Interval Type 1~2 1~2 None Interval Type 10~254 10~254 None GBFD113801 TRX Enumeration Cooperation Type ALL(All), PART(Part) SoftSynchroniz ed Network Interval Type -10000~10000 ALL, PART None GBFD118201 -10000~10000 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None MRFD210304 Faulty Manageme Enumeration DISABLE(Disable), nt Type ENABLE(Enable) Faulty Manageme nt Interval Type 0~65534 DISABLE, ENABLE None MRFD210304 0~65534 s MRFD210304 Faulty Manageme nt Interval Type 60~65534 Faulty Manageme Enumeration DISABLE(Disable), nt Type ENABLE(Enable) 60~65534 s MRFD210304 DISABLE, ENABLE None GBFD510002 Gb Over FR Interval Type 1~6 1~6 None GBFD510002 Gb Over FR Interval Type 1~120 1~120 s None None Interval Type 0~335 0~335 None None None Interval Type 0~5,8~27 0~5, 8~27 None None None Interval Type 0~11 0~11 None GBFD111705 GBFD118611 GBFD118622 GSM Flow Control Interval Type 0~5000 Abis IP over E1/T1 A IP over Enumeration E1/T1 Type NO(NO), YES(YES) Faulty Manageme Enumeration nonrpt(Not Report), nt Type rpt(Report) 0(0), 1(1), 2(2), 3(3), Enumeration 4(4), 5(5), 6(6), Type NULL(NULL) 0(0), 1(1), 2(2), 3(3), Enumeration 4(4), 5(5), 6(6), Type NULL(NULL) 0~5000 s NO, YES None MRFD210304 nonrpt, rpt None GBFD111202 O&M of BTS 0, 1, 2, 3, 4, 5, 6, NULL None GBFD111202 O&M of BTS 0, 1, 2, 3, 4, 5, 6, NULL None GBFD110601 GBFD510501 HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None GBFD510501 GBFD110601 GBFD510501 HUAWEI II Handover Interval Type 1~16 HUAWEI I Handover HUAWEI II Handover Interval Type 0~127 0.5~8, step:0.5 s 0~127 dB GBFD510501 MRFD210301 MRFD210301 MRFD210301 HUAWEI II Handover Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 1~16 0.5~8, step:0.5 s Enumeration SCU, GCU, XPU, INT, SCU, GCU, XPU, INT, Type TNU TNU None Enumeration SCU, GCU, XPU, Type DPU, INT, TNU SCU, GCU, XPU, DPU, INT, TNU None Enumeration INT, DPU, XPU, TNU, INT, DPU, XPU, TNU, Type OMU, SAU OMU, SAU None GBFD111202 O&M of BTS Interval Type 0~72 0~72 None GBFD111202 O&M of BTS Interval Type 0~47 0~47 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Interval Type 0~1000 DATM_MAIN, DATU_MAIN, DDPM_MAIN, Enumeration DDPU_MAIN, Type DDRM_MAIN, 0~100000 (step: 100) DATM_MAIN, DATU_MAIN, DDPM_MAIN, DDPU_MAIN, DDRM_MAIN, kbit/s None GBFD111202 O&M of BTS Interval Type 0~1000 0~100000 (step: 100) kbit/s MRFD210301 MRFD210301 Configuratio n Manageme nt Configuratio n Manageme nt Enumeration Type DPUa, FG2a, GOUa, PEUa, DPUc EIUa, OIUa, POUc, FG2c, GOUc, XPUa, Enumeration XPUb, DPUa, DPUb, Type DPUc, DPUd, TNUa, DPUa, FG2a, GOUa, None PEUa, DPUc EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, DPUb, DPUc, DPUd, TNUa, OMUa, None None None Enumeration FG2a, GOUa, FG2c, Type GOUc FG2a, GOUa, FG2c, GOUc None None None Enumeration Type PEUa, POUc PEUa, POUc None None None Enumeration Type PEUa, POUc PEUa, POUc None None None Enumeration Type PEUa, POUc PEUa, POUc None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Fast Ring Network Switch Simplified Cell Broadcast Enumeration MRRU, GRRU, MRFU, Type GRFU, BTS3900E TMU(TMU/DTMU), DTRU(DTRU), DPTU(DPTU), Enumeration QTRU(QTRU), Type MRRU(MRRU), MRRU, GRRU, MRFU, GRFU, BTS3900E None TMU, DTRU, DPTU, QTRU, MRRU, GRRU, BTS3900B, MRFU, GRFU, BTS3900E, DRFU, DRRU, UBRI, UTRP None GBFD117802 Interval Type 0~255 0~255 s GBFD113602 String Type None 1~80 characters None GBFD113602 GBFD111203 MRFD210305 Simplified Cell Broadcast Interval Type O&M of BSC Security Manageme Enumeration nt Type 2~3600 2~3600 ENTIRE(Entire Backup), INCREMENTAL(Incre mental Backup) ENTIRE, INCREMENTAL s None GBFD111003 Radio Common Channel Manageme nt Interval Type 0~7 0~7 None GBFD118602 GBFD111602 GBFD111803 GBFD113601 A over IP TRX Power Amplifier Intelligent Shutdown A Interface Circuit Manageme nt Short Message Service Cell Broadcast (TS23) Interval Type 1~16777215 1~16777215 None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration MAINBSC(MAIN BSC), Type SUBBSC(SUB BSC) MAINBSC, SUBBSC None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118201 SoftSynchroniz Compound ed Network Type SoftSynchroniz Compound ed Network Type hour, min hour{0~23} min{0~59} None GBFD118201 hour, min hour{0~23} min{0~59} None GBFD118605 MRFD210301 IP QOS Interval Type 0~15 Configuratio n Manageme nt Interval Type 0~15 SoftSynchroniz ed Network Interval Type 5~60 Short Message Service Cell Broadcast IP Address (TS23) Type None 0~15 None 0~15 None GBFD118201 5~60 d GBFD113601 0.0.0.0~255.255.255.255 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None GBFD117701 BSC Local Switch Connection Inter BSC over IP Enhanced Multi Level Precedence and Preemption Enhanced Multi Level Precedence and Preemption UNCONDITIONALSTA RT(Unconditional Start), UNCONDITIONALSTART, Enumeration ATERCONGESTS(Sta ATERCONGESTS, Type rt When Ater PREFIXNUMBER None GBFD118621 String Type None 1~64 characters None GBFD115001 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD115001 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114701 SemiPermanent Connection Interval Type 0~335 0~335 None GBFD113801 GBFD115001 GBFD115001 GBFD115001 MRFD210301 MRFD210301 MRFD210301 TRX Cooperation Enhanced Multi Level Precedence and Preemption Enhanced Multi Level Precedence and Preemption Enhanced Multi Level Precedence and Preemption Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~65535 0~65535 None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None MRFD210301 MRFD210301 MRFD210301 MRFD210301 Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None GBFD114701 SemiPermanent Connection Interval Type 0~27 SemiPermanent Connection Interval Type 0~11 SemiPermanent Connection Interval Type 0~7 SoftSynchroniz ed Network Interval Type 0~2500 0~27 None GBFD114701 0~11 None GBFD114701 0~7 None GBFD118201 0~2500 None GBFD113726 TC Pool Interval Type 0~15 0~15 None GBFD113726 TC Pool Interval Type 1~15 1~15 None GBFD114701 SemiPermanent Connection Interval Type 1~31 1~31 None GBFD114101 GPRS Interval Type 0~15 0~15 None GBFD110802 MRFD210301 GBFD110303 MRFD210301 MRFD210301 GBFD117701 GBFD117702 GBFD117701 GBFD117702 Preprocessing of Measureme Enumeration nt Report Type NO(No), YES(Yes) Configuratio n Manageme nt Interval Type 0~12 2_M_PERIOD(2 Multiframe Period), 3_M_PERIOD(3 Enumeration Multiframe Period), Paging Type 4_M_PERIOD(4 Configuratio n Manageme nt Interval Type 1~4 Configuratio n Manageme nt Interval Type 0~12 NEITHERSTART(Neit BSC Local her Start), Switch BTSPRIORITY(BTS BTS Local Enumeration Priority), Switch Type BSCPRIORITY(BSC NONSUPPORT(Not BSC Local Support), BASIC(Basic Switch Fun), BTS Local Enumeration ENHANCED(Enhance Switch Type d Fun) BSS Paging Coordinatio Enumeration n Type NO(NO), YES(YES) NO, YES None 0~12 None 940~4230, step: 470 ms 1~4 None 0~12 NEITHERSTART, BTSPRIORITY, BSCPRIORITY, BTSONLY, BSCONLY None None NONSUPPORT, BASIC, ENHANCED None GBFD119305 NO, YES None MRFD210502 MRFD210401 MRFD210401 BSC/RNC Clock BSC/RNC Software Manageme nt BSC/RNC Software Manageme nt Enumeration PEUa, EIUa, OIUa, Type POUc GCUa, GCGa, SCUa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, Enumeration FG2c, GOUc, XPUa, Type XPUb, DPUa, DPUb, SCUa, GCUa, GCGa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, Enumeration FG2c, GOUc, XPUa, Type XPUb, DPUa, DPUb, PEUa, EIUa, OIUa, POUc None SCUa, GCUa, GCGa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, GCUa, DPUc, None SCUa, DPUb, GCGa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, DPUb, DPUc, None None None Enumeration PEUa, POUc, EIUa, Type OIUa PEUa, POUc, EIUa, OIUa None None None Enumeration Type PEUa, POUc, EIUa PEUa, POUc, EIUa None None None Enumeration PEUa, POUc, EIUa, Type OIUa PEUa, POUc, EIUa, OIUa None None None Enumeration Type POUc, OIUa POUc, OIUa None None None Enumeration Type POUc, OIUa POUc, OIUa None None None Enumeration FG2a, GOUa, FG2c, Type GOUc, POUc FG2a, GOUa, FG2c, GOUc, POUc None None None Remote Electrical Tilt MRFD210602 GBFD111202 O&M of BTS GBFD111202 O&M of BTS GBFD111202 O&M of BTS GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type EIUa DATU(DATU), GATM(GATM), DRRU(DRRU), Enumeration MRRU(MRRU), Type MRFU(MRFU), CDU(CDU), PCDU(PCDU), DCDU(DCDU), Enumeration CDUC(CDUC), Type CDUP(CDUP), PWC(PWC), EAC_EMUA(EAC_EM UA), DTMU(DTMU), Enumeration DATM_DATU(DATM_ Type DATU), NFCB(NFCB), DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), Enumeration XRRU(XRRU), Type MRFU(MRFU), TRX(TRX_DEFAULT), TRX_GPRS(TRX_GP RS), DRU(TRX_30), Enumeration PTRX(PTRX), Type ETRX(ETRX), CDU(CDU), CDUC(CDUC), CDUP(CDUP), Enumeration CDUR(CDUR), Type CDUE(CDUE), EIUa DATU, GATM, DRRU, MRRU, MRFU, GRFU, GRRU, BTS3900E CDU, PCDU, DCDU, CDUC, CDUP, RCDU, CDUR, CDUE, EDU, PEDU, REDU, DEDU, EDUC, EDUP, EDUR, BIE, PWC, EAC, EMUA, MCK, DTMU, DATM_DATU, NFCB, EMU_DEMU, DPMU, DCBM_DCOM, DHEU, None None None None DRRU, DRFU, MRRU, XRRU, MRFU, GRFU, GRRU, XRFU, BTS3900E None TRX_30_OR_DRU, TRX_GPRS, PTRX, ETRX, RTRX, DTRX, RETR, DETR, EETR, PETR, MTR, TRU, QTRU None CDU, CDUC, CDUP, CDUR, CDUE, PCDU, RCDU, DCDU, EDU, EDUC, EDUP, EDUR, EDUE, PEDU, REDU, None GBFD111801 GBFD111801 GBFD111202 GBFD111611 Ater Interface 4:1 Multiplexing Ater Interface 4:1 Multiplexing O&M of BTS TRX Working Voltage Enumeration CFGBM(BM), Type CFGTC(TC) CFGBM, CFGTC None Enumeration CFGBM(BM), Type CFGTC(TC) CFGBM, CFGTC None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS String Type None 1~64 characters None GBFD118601 LOGICIP(Logic IP), Enumeration PORTIP(Port IP), Abis over IP Type PPP/MP(PPP/MP) LOGICIP, PORTIP, PPP/MP None GBFD111202 O&M of BTS String Type None 0~64 characters None GBFD118601 Enumeration CLOSE(CLOSE), Abis over IP Type OPEN(OPEN) CLOSE, OPEN None GBFD118605 IP QOS Interval Type 0~2047 0~2047 None GBFD111202 O&M of BTS Interval Type 0~2047 0~2047 None GBFD111202 GBFD118401 O&M of BTS Interval Type 0~2047 Abis Transmissio n Optimizatio n Interval Type 0~2047 0~2047 None 0~2047 None GBFD111202 O&M of BTS Interval Type 0~2047 0~2047 None GBFD118201 SoftBYIDX(By BTS Index), Synchroniz Enumeration BYNAME(By BTS ed Network Type Name) BYIDX, BYNAME Remote Electrical Tilt None MRFD210602 Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None MRFD210305 Security Manageme nt Interval Type 0~2047,65535 0~2047, 65535 None GBFD118601 IP Address Abis over IP Type GBFD117702 BTS Local Switch None UNCONDITIONALSTA RT(Unconditional Start), Enumeration ABISCONGESTS(Start Type When Abis Congests), 0.0.0.0~255.255.255.255 None UNCONDITIONALSTART, ABISCONGESTS, PREFIXNUMBER None GBFD118601 GBFD110802 IP Address Abis over IP Type Preprocessing of Measureme Enumeration nt Report Type None 0.0.0.0~255.255.255.255 BSC_Preprocessing(B SC preprocessing), BTS_Preprocessing(B BSC_Preprocessing, TS preprocessing) BTS_Preprocessing None None GBFD111202 GBFD118401 O&M of BTS String Type Abis Transmissio n Optimizatio n String Type None 1~64 characters None None 1~64 characters None GBFD111202 O&M of BTS String Type None 1~2048 characters None GBFD118601 GBFD111605 Enumeration Abis over IP Type OFF(Off), ON(On) Active Backup Power Enumeration Control Type NO(No), YES(Yes) OFF, ON None NO, YES None GBFD110703 Enhanced Power Control Algorithm Network Support SAIC Interval Type 1~16 2~32, step:2 dB GBFD118103 Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD111202 GBFD118401 GBFD111202 GBFD510701 GBFD111202 GBFD118609 GBFD111207 GBFD111202 O&M of BTS String Type None Abis Transmissio n Optimizatio n Interval Type 1~250 BTS312, BTS30, BTS3001C, BTS3001CP, O&M of Enumeration BTS3002C, BTS Type BTS3012A, Compact BTS BTS3900B_GSM(BTS Automatic 3900B GSM), Configuratio Enumeration BTS3900E_GSM(BTS n and Type 3900E GSM) BTS3012(BTS3012), BTS3006C(BTS3006C ), O&M of Enumeration BTS3002E(BTS3002E) BTS Type , IP Fault Detection Based on BFD Interval Type 0~1000000 BIULOOP(BIU Loopback Test), BTS Test Enumeration TRXSELFTEST(TRX Function Type Self Loopback Test) NO_BAT(No Storage Battery), INSIDE_BAT(Inside O&M of Enumeration Storage Battery), BTS Type OUTSIDE_BAT(Outsid Fast Ring Network Switch 1~256 characters None 1~250 BTS312, BTS30, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, None None BTS3900B_GSM, BTS3900E_GSM BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, None None 0~1000000 s BIULOOP, TRXSELFTEST None NO_BAT, INSIDE_BAT, OUTSIDE_BAT None GBFD117802 Interval Type 10~255 10~255 s GBFD118602 A over IP Enumeration Type NO(NO), YES(YES) YES, NO None GBFD119001 Gb Interface Function Gb Interface Function Gb Interface Function Interval Type 2~65534 2~65534 None GBFD119001 Interval Type 2~65534 2~65534 None GBFD119001 Interval Type 1000~3000 1000~3000 ms GBFD118605 IP QOS Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS GBFD118605 IP QOS Interval Type 100~1000 FULL_DUPLEX(Full Duplex), Enumeration HALF_DUPLEX(Half Type Duplex) 100~1000 per cent FULL_DUPLEX, HALF_DUPLEX None GBFD118605 GBFD110801 GBFD110802 MRFD210301 IP QOS Processing of Measureme nt Report PreConfiguratio n Manageme nt Interval Type 0~100 0~100 per cent Interval Type 20~100 20~100 per cent GBFD114101 GPRS BYIDX(By Cell Index), Enumeration BYNAME(By Cell Type Name) BYIDX, BYNAME C31NOTUSE(Not Use c31 standard), Enumeration C31STANDARD(Use C31NOTUSE, Type c31 standard) C31STANDARD None None GBFD114101 GPRS Interval Type 0~1 0~1 None GBFD111202 O&M of BTS String Type None 1~200 characters None GBFD111202 MRFD210301 O&M of BTS Interval Type 0~8 Configuratio n Manageme Enumeration nt Type NO(NO), YES(YES) 0~8 None NO, YES None GBFD110503 Call Reestablish Enumeration ment Type NO(No), YES(Yes) NO, YES None GBFD111202 GBFD113701 GBFD510702 O&M of BTS Frequency Hopping (RF hopping, baseband Compact BTS Automatic Capacity Planning Interval Type 0~4095 0~4095 None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS GBFD118605 IP QOS Enumeration Type OFF(OFF), ON(ON) GSM900(GSM900), DCS1800(DCS1800), Enumeration GSM850(GSM850), Type PCS1900(PCS1900) NULL(NULL), IPLGCPORT(IP Logic Port), Enumeration RSCGRP(Resource Type Group) ETHER, Enumeration IPLOGICPORT, Type TRUNK, PPP, MP OFF, ON None GSM900, DCS1800, GSM850, PCS1900 None NULL, IPLGCPORT, RSCGRP None GBFD118605 IP QOS ETHER, IPLOGICPORT, TRUNK, PPP, MP None None GBFD110401 GBFD110402 GBFD113601 GBFD113601 GBFD113601 None Cell Basic Selection Basic Cell Reselection Short Message Service Cell Broadcast (TS23) Short Message Service Cell Broadcast (TS23) Short Message Service Cell Broadcast (TS23) Enumeration Type ETHPORT, TRUNK ETHPORT, TRUNK None Enumeration Type NO(NO), YES(YES) NO, YES None Interval Type 0~3 0~3 None IP Address Type None 0.0.0.0~255.255.255.255 None Interval Type 0~63 0~63 None GBFD113601 GBFD113601 Short Message Service Cell Broadcast (TS23) Interval Type 0~65535 Short Message Service Cell Broadcast (TS23) Interval Type 5~180 0~65535 None 5~180 s GBFD110401 Basic Cell Selection Enumeration Type NO(No), YES(Yes) NO, YES None GBFD118605 GBFD113601 GBFD117501 GBFD117501 MRFD210301 IP QOS Short Message Service Cell Broadcast (TS23) Enhanced Measureme nt Report(EM R) Enhanced Measureme nt Report(EM R) Configuratio n Manageme nt Security Manageme nt Radio Common Channel Manageme nt Radio Common Channel Manageme nt Interval Type 4500~32767 4500~32767 byte Interval Type 1~5 1~5 TCH:0~14880, step:480; SDCCH:0~14570, step:470 TCH:0~14880, step:480; SDCCH:0~14570, step:470 s Interval Type 0~31 ms Interval Type 0~31 ms Interval Type 0~65535 0~65535 None MRFD210305 Enumeration DISABLE(Disabled), Type ENABLE(Enabled) DISABLE, ENABLE None GBFD111003 Interval Type 0~255 0~255 s GBFD111003 Interval Type 20~100 20~100 per cent GBFD118603 Gb over IP Interval Type 0~63 0~63 None GBFD118630 Ethernet OAM Enumeration Type 10, 100, 1000 10, 100, 1000 ms GBFD110607 GBFD114301 GBFD114302 GBFD114301 GBFD114302 MRFD210301 MRFD210301 MRFD210301 MRFD210301 Direct Retry GSM/WCD MA Interoperabi lity GSM/TDGSM/WCD MA Interoperabi lity GSM/TDConfiguratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~100 0~100 per cent Interval Type 0~7 0~42, step: 6 dB Interval Type 0~7 0~36, Positive infinity, step: 6 dB Interval Type 0~1023 0~1023 None Enumeration AUTO(Auto), Type MANU(Manu) AUTO, MANU None Interval Type 0~1023 0~1023 None Enumeration AUTO(Auto), Type MANU(Manu) AUTO, MANU None GBFD119115 GBFD114301 GBFD114302 GBFD114301 GBFD114302 GBFD114101 Power Control GSM/WCD Interval Type 0~50 MA Interoperabi lity GSM/TDGSM/WCD Interval Type 0~7 MA Interoperabi lity GSM/TDInterval Type 0~7 Permit(Permit Cell Access), Enumeration NoPermit(Prohibit Cell GPRS Type Access) 0~50 None 0~42, step: 6 dB 0~36, Positive infinity, step: 6 dB Permit, NoPermit None GBFD111202 O&M of BTS OUTDOOR_CELL(Out door Cell), Enumeration INDOOR_CELL(Indoor OUTDOOR_CELL, Type Cell) INDOOR_CELL None GBFD111202 O&M of BTS Interval Type 240~289 24.0~28.9 (step: 0.1) V GBFD111202 O&M of BTS Interval Type 433~576 43.3~57.6 (step: 0.1) V GBFD111202 O&M of BTS Interval Type 240~289 24.0~28.9 (step: 0.1) V GBFD111202 MRFD210301 MRFD210301 O&M of BTS Interval Type 432~575 Configuratio n Manageme nt Interval Type 0~2047 Configuratio n Manageme nt Interval Type 0~2047 43.2~57.5 (step: 0.1) V 0~2047 None 0~2047 None MRFD211402 MRFD210301 MRFD210301 MBSC Load Balancing Interval Type 0~2047 Configuratio n Manageme nt Interval Type 0~2047,65535 Configuratio n Manageme nt Interval Type 0~2047 0~2047 None 0~2047, 65535 None 0~2047 None GBFD111202 GBFD510901 O&M of BTS Interval Type 0~2047 2G/3G Neighboring Cell Automatic Optimizatio String Type None 0~2047 None 1~400 characters None MRFD210301 MRFD210301 Configuratio n Manageme nt Configuratio n Manageme nt Remote Electrical Tilt Enhanced Dual-Band Network HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt Enumeration BYNAME(By name), Type BYID(By index) BYNAME, BYID None Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None MRFD210602 Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None GBFD114402 GBFD110601 GBFD510501 Enumeration Inner(Inner), Type Extra(Extra) Inner, Extra None Enumeration Type 1, 2, 3, 4 1, 2, 3, 4 None MRFD210301 String Type None 0~5000 characters None GBFD111804 A Interface Protocol Enumeration Process Type NO(No), YES(Yes) SDCCH Dynamic Adjustment Interval Type 0~255 Configuratio n Manageme nt String Type None NO, YES None GBFD113001 0~255 None MRFD210301 1~64 characters None MRFD211402 MBSC Load Balancing String Type None 1~64 characters None GBFD111202 MRFD210301 O&M of BTS String Type Configuratio n Manageme nt String Type None 1~64 characters None None 0~5000 characters None GBFD118701 GBFD110801 GBFD110802 GBFD110801 GBFD110802 GBFD111003 OP1(Operator 1), OP2(Operator 2), OP3(Operator 3), RAN Enumeration OP4(Operator 4), Sharing NONE(Not Shared) Processing Type of Measureme nt Report PreProcessing Interval Type 0~63 of Measureme nt Report PreInterval Type 0~63 Radio Common Channel Manageme nt Interval Type 1~20 OP1, OP2, OP3, OP4, NONE None 0~63 dB 0~63 None 1~20 None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 GBFD116201 GBFD116201 GBFD510803 GBFD510804 GBFD114325 O&M of BTS NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) Uplink EGPRS2-A Downlink EGPRS2-A Fast 3G Reselection at 2G CS Call Release Interval Type 350~553 2G(Preference for 2G Enumeration Cell), 3G(Preference Type for 3G Cell) 35.0~55.3 (step: 0.1) V 2G, 3G None Interval Type 0~100 COMMON(COMMON), 0~100 MULTIPATH(MULTIP ATH), Enumeration INDOOR(INDOOR), COMMON, MULTIPATH, Type HIGHWAY(HIGHWAY) INDOOR, HIGHWAY per cent None Enumeration Type NO(No), YES(Yes) NO, YES None MRFD210304 Faulty Manageme nt Interval Type 400~790 Faulty Manageme nt Interval Type -190~50 40.0~79.0 (step: 0.1) degree Celsius MRFD210304 -19.0~5.0 (step: 0.1) degree Celsius GBFD111202 O&M of BTS Interval Type 0~1000 0.0~100.0 (step: 0.1) degree Celsius GBFD111202 O&M of BTS Interval Type -500~0 -50.0~0.0 (step: 0.1) degree Celsius GBFD111202 GBFD110801 GBFD110802 GBFD110801 GBFD110802 O&M of BTS Processing of Measureme nt Report PreProcessing of Measureme nt Report Pre- Enumeration Type NO(NO), YES(YES) NO, YES None Interval Type 0~63 0~63 dB Interval Type 0~63 0~63 None GBFD111705 GSM Flow Control Interval Type 20~90 20~90 per cent MRFD210305 Security Manageme nt String Type None 0~200 characters None GBFD111202 O&M of BTS GBFD118605 GBFD510701 IP QOS Compact BTS Automatic Configuratio Enumeration AUTO(AUTOPLAN), n and Type NORMAL(NORMAL) Enumeration Type NO(NO), YES(YES) NO, YES NULL(NULL), IPLGCPORT(IP Logic Port), Enumeration RSCGRP(Resource NULL, IPLGCPORT, Type Group) RSCGRP None None AUTO, NORMAL None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111203 MRFD210305 GBFD111203 MRFD210305 GBFD111203 MRFD210305 O&M of BSC Security Manageme nt O&M of BSC Security Manageme nt O&M of BSC Security Manageme nt Password Type None G_16, G_17, G_15, G_18, G_19, G_20, G_21, G_22, G_23, Enumeration G_24, G_25, G_26, Type G_27, G_28, G_29, G_0~0 G_1~1 G_2~2 G_3~3 G_4~4 G_5~5 G_6~6 G_7~7 G_8~8 G_9~9 G_10~10 Bit Field Type G_11~11 G_12~12 1~32 characters G_15, G_16, G_17, G_18, None G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, G_29, G_30, G_31G_1, G_2, G_3, G_4, None G_0, G_5, G_6, G_7, G_8, G_9, G_10, G_11, G_12, G_13, G_14, G_15, G_16, G_17, G_18, G_19, G_20, G_21, None GBFD111203 O&M of BSC Interval Type 20~90 20~90 None GBFD111203 GBFD510701 GBFD111203 MRFD210305 O&M of BSC Compact BTS Automatic Configuratio n and of O&M BSC Security Manageme nt Interval Type 20~90 20~90 None Enumeration Type OFF(OFF), ON(ON) OFF, ON None String Type None 1~32 characters None GBFD114101 GPRS Interval Type 0~2 0~2 None GBFD111203 O&M of BSC Interval Type 30~100 30~100 None GBFD111203 O&M of BSC Interval Type 30~100 30~100 None GBFD111203 O&M of BSC GBFD510103 Chain Cell Handover Interval Type 30~100 QUICK_HO_NCELL_T YPE_A(QUICK_HO_N CELL_TYPE_A), Enumeration QUICK_HO_NCELL_T Type YPE_B(QUICK_HO_N 30~100 None QUICK_HO_NCELL_TYP E_A, QUICK_HO_NCELL_TYP E_B None GBFD111202 GBFD111005 CHAINTORING(Chain ToRing), O&M of Enumeration COMBINECHAINS(Co BTS Type mbineChains) CAPABILITY(Capabilit Enhanced y preferred), Channel QUALITY(Quality Assignment Enumeration preferred), Algorithm Type PSRELATIVELY(PS CHAINTORING, COMBINECHAINS CAPABILITY, QUALITY, PSRELATIVELY, PSABSOLUTELY None None None None Interval Type 0~100 0~100 per cent GBFD111203 O&M of BSC Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD111203 O&M of BSC Interval Type 0~100 0~100 per cent GBFD113602 GBFD111005 Simplified Cell Broadcast Interval Type 0~65535 Enhanced Channel Assignment Enumeration Algorithm Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) 0~65535 None NO, YES None GBFD111804 NO, YES None None None Interval Type 1~64 1~64 s GBFD118605 IP QOS Interval Type 1~5 1~5 None MRFD210206 Tree Topology Enumeration Type NO(No), YES(Yes) MODE1(Mode 1), Enumeration MODE2(Mode 2), Type MODE3(Mode 3) NO, YES None GBFD111202 O&M of BTS MODE1, MODE2, MODE3 None GBFD111202 GBFD118609 GBFD118609 O&M of BTS IP Fault Detection Based on BFD IP Fault Detection Based on BFD MODE1(Mode 1), Enumeration MODE2(Mode 2), Type MODE3(Mode 3) MODE1, MODE2, MODE3 None Interval Type 0~511 0~511 None Interval Type 0~511 0~511 None GBFD111202 O&M of BTS Interval Type 5~20 5~20 None GBFD111202 O&M of BTS Interval Type 5~20 5~20 None GBFD118602 A over IP Enumeration Type NO(NO), YES(YES) NO, YES None GBFD118602 A over IP Enumeration Type NO(NO), YES(YES) NO, YES None GBFD118602 GBFD118609 A over IP IP Fault Detection Based on BFD Enumeration ALDER32(ALDER32), Type CRC32(CRC32) ALDER32, CRC32 None Enumeration Type SBFD, ARP, MBFD SBFD, ARP, MBFD None GBFD111207 MRFD210301 BTS Test Function Interval Type 0~12 Configuratio n Manageme nt Interval Type 1~7 0~12 h 1~7 None GBFD111203 O&M of BSC Interval Type 0~169 0~169 None MRFD210301 GBFD111207 MRFD210301 Configuratio n Manageme nt Interval Type 0~7 TRXRFSELFLOOP(TR X RF Self Loopback Test), BIULOOP(BIU BTS Test Enumeration Loopback Test), Function Type BTSSPEECHLOOP(B Configuratio n Manageme Enumeration FULLTCH(FULLTCH), nt Type HALFTCH(HALFTCH) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) NOSENDING(Force NO Sending), A Interface SYSTEMOPT(System Protocol Enumeration Optimization), Process Type SENDING(Force Enhanced Channel Assignment Enumeration Algorithm Type NO(No), YES(Yes) 0~7 TRXRFSELFLOOP, BIULOOP, BTSSPEECHLOOP, TRXSPEECHLOOP None None FULLTCH, HALFTCH None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD111804 NOSENDING, SYSTEMOPT, SENDING None GBFD111005 NO, YES None GBFD111705 GSM Flow Control Interval Type 10~800 10~800 None GBFD111705 GSM Flow Control Interval Type 10~800 10~800 None GBFD111705 MRFD210301 MRFD210301 MRFD210301 GBFD111803 GSM Flow Control Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt A Interface Circuit Manageme nt Interval Type 100~600000 Full TCHFR(TCH Rate), TCHHR(TCH Half Rate), Enumeration SDCCH8(SDCCH8), Type MBCCH(Main BCCH), 100~600000 TCHFR, TCHHR, SDCCH8, MBCCH, CBCCH, BCH, BCCH_CBCH, SDCCH_CBCH, ms None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None Interval Type 0~65535 0~65535 None GBFD111203 O&M of BSC Interval Type 0~65535 0~65535 None GBFD111804 A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) NOTSENDING(Not sending), A Interface SENDINGPRO(sendin Protocol Enumeration g according to Process Type protocol), NOTSENDING(Not sending), A Interface SENDINGPRO(sendin Protocol Enumeration g according to Process Type protocol), A Interface Protocol Enumeration Process Type NO(No), YES(Yes) NO, YES None GBFD111804 NO, YES None GBFD111804 NOTSENDING, SENDINGPRO, SENDING None GBFD111804 NOTSENDING, SENDINGPRO, SENDING None GBFD111804 NO, YES None GBFD111804 A Interface Protocol Enumeration Process Type NO(No), YES(Yes) NO, YES None GBFD118605 GBFD111005 IP QOS Interval Type 1~1562 Enhanced Channel Assignment Algorithm Interval Type 0~22 64~100000, step:64 kbit/s 0~22 dB GBFD111202 O&M of BTS Interval Type 0~27 0~27 None GBFD111202 O&M of BTS Interval Type 0~11 UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) 0~11 None GBFD119403 Class11 DTM UNSUPPORT, SUPPORT None GBFD110501 GBFD118611 GBFD118622 Enumeration Call Control Type Abis IP over E1/T1 A IP over Enumeration E1/T1 Type GBFD111202 O&M of BTS NO(No), YES(Yes) ERR_PFM_1E6(RECO VERY:1E-6), ERR_PFM_5E6(RECO VERY:5E-6), ERR_PFM_1E5(RECO INCLK(Internal Clock), BSCCLK(Trace BSC Clock), Enumeration EXCLK(External Type Synchro Clock), NO, YES None ERR_PFM_1E6, ERR_PFM_5E6, ERR_PFM_1E5, ERR_PFM_5E5, ERR_PFM_1E4, None INCLK, BSCCLK, EXCLK, IPCLK, TRANSCLK, GPSCLK, UMCLK, PEERCLK None GBFD111202 O&M of BTS HW_DEFINED(Huawei Enumeration User-defined), Type PTP(PTP Protocol) HW_DEFINED, PTP None None MRFD210501 Enumeration Type GCUa, GCGa INT_CLK(Internal Clock), TRCBSC_CLK(Trace BTS/NodeB Enumeration BSC Clock), Clock Type EXTSYN_CLK(Externa None GCUa, GCGa INT_CLK, TRCBSC_CLK, None EXTSYN_CLK, IP_TIME, IP_TRANSFER, TRCGPS_CLK, UM_CLK, PEER_CLK None GBFD111202 O&M of BTS Interval Type 0~255 0~255 s MRFD210304 Faulty Manageme nt Bit Field Type cleared, uncleared cleared, uncleared None GBFD111202 GBFD111203 MRFD210305 GBFD111203 MRFD210305 O&M of BTS of Interval Type 0~255 O&M BSC Security Manageme nt String Type None O&M of BSC Security Manageme nt String Type None 0~255 s 1~200 characters None 0~128 characters None GBFD111203 MRFD210301 O&M of BSC Interval Type 0~19 Configuratio n Manageme nt Interval Type 1~3 0~19 None 1~3 None GBFD111202 GBFD118609 O&M of BTS IP Fault Detection Based on BFD Interval Type 0~62 0~62 None Interval Type 0~62 0~62 None GBFD111202 O&M of BTS Interval Type 0~62 0~62 None GBFD111202 O&M of BTS Interval Type 0~62 0~62 None GBFD113725 BSC Node Redundanc y Interval Type 1~60 1~60 s GBFD117401 MSC Pool Interval Type 0~4095 0~4095 None GBFD119701 SGSN Pool Interval Type 0~4095 0~4095 None GBFD117401 MSC Pool Interval Type 0~31 0~31 None MRFD210403 License Manageme nt Interval Type 0~3 BSC Node NONE(None), Redundanc Enumeration AINTFBLOCK(AInterf y Type Block) Faulty Manageme nt Interval Type 1~150000 0~3 None GBFD113725 NONE, AINTFBLOCK None MRFD210304 1~150000 None GBFD111202 O&M of BTS GBFD111202 GBFD111203 MRFD210305 O&M of BTS of O&M BSC Security Manageme nt Interval Type 10000~50000 Faulty Manageme nt Interval Type 0~250 Enumeration BTS3002C, BTS3002C, BTS3012A, Type BTS3012A, BTS3006A BTS3006A BTS3012AE, BTS3012(BTS3012), BTS3012, BTS3012AE(BTS3012 BTS3006C, BTS3012_II, AE), BTS3002E, Enumeration BTS3006C(BTS3006C DBS3900_GSM, Type ), BTS3900_GSM, None None 10000~50000 None MRFD210304 0~250 None MRFD210304 GBFD110601 GBFD510501 Faulty Manageme nt Interval Type 0~250 HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) 0~250 None NO, YES None GBFD113602 Simplified Cell Broadcast Interval Type 1~1023 1~1023 None GBFD111202 O&M of BTS Enumeration INACTIVE(Inactive), Type ACTIVE(Active) INACTIVE, ACTIVE None GBFD118201 SoftSynchroniz Enumeration BYSITE(By Site), ed Network Type BYCELL(By Cell) Active Power Control Interval Type Radio Common Channel Manageme nt Bit Field Type BYSITE, BYCELL None GBFD117602 GBFD111003 0~100 L0_FORBID, L1_FORBID, L2_FORBID, L3_FORBID, L4_FORBID, 0~10, step:0.1 L0_FORBID, L1_FORBID, dB L2_FORBID, L3_FORBID, L4_FORBID, L5_FORBID, L6_FORBID, L7_FORBID, L8_FORBID, L9_FORBID None MRFD210305 Security Manageme LOWERCASE, nt Bit Field Type UPPERCASE, DIGIT LOWERCASE, UPPERCASE, DIGIT None GBFD111202 GBFD110601 GBFD510501 O&M of BTS Interval Type 1~100 HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) 1~100 None NO, YES None GBFD111202 MRFD211503 MRFD211503 MRFD211503 O&M of BTS Co2G/3G Transmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms MRFD211503 MRFD211503 MRFD211503 MRFD211503 MRFD211503 MRFD211503 MRFD211503 MRFD211503 MRFD211503 GBFD110601 GBFD510501 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme 2G/3G CoTransmissio n Resources Manageme HUAWEI I Handover HUAWEI II Handover Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Interval Type 10~150 10~150 ms Enumeration Type NO(No), YES(Yes) NO, YES None MRFD210206 MRFD210301 Tree Topology Interval Type 0~335 Configuratio n Manageme Enumeration nt Type NO(NO), YES(YES) 0~335 None NO, YES None GBFD111203 MRFD210305 O&M of BSC Security ALL(ALL Type), Manageme Enumeration ONLY_SSL(Only SSL nt Type Connection) ALL, ONLY_SSL None MRFD211402 GBFD110601 GBFD510501 GBFD110601 GBFD510501 MBSC Load Balancing HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover INNER(Internal RNC), Enumeration EXTERNAL(External Type RNC) INNER, EXTERNAL None Interval Type 0~60 0~60 s Interval Type 1~200 1~200 s None None Enumeration Type NO(NO), YES(YES) NO, YES None None GBFD111602 MRFD210301 None TRX Power Amplifier Intelligent Shutdown Configuratio n Manageme nt Interval Type 1~28 1~28 None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~7 OFF(Off), ON(On), Enumeration NOTSUPPORT(Not Type Support) 0dB, 2dB, 4dB, 6dB, Enumeration 8dB, 10dB, 12dB, Type 14dB 0~7 None GBFD111202 O&M of BTS Basic Cell Reselection OFF, ON, NOTSUPPORT None GBFD110402 0dB, 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB dB MRFD210305 Security Manageme nt String Type None 0~200 characters None MRFD210305 Security Manageme Enumeration DISABLE(Disable), nt Type ENABLE(Enable) DISABLE, ENABLE None GBFD510301 GBFD510302 GBFD510301 GBFD510302 Public Voice Group Call Service Public Voice Group Call Service Public Basic Cell Reselection Interval Type 1~255 10~2550, step: 10 ms Interval Type 1~255 1~255 None GBFD110402 Interval Type 0~63 0~126, step: 2 dB GBFD111203 O&M of BSC GBFD118602 A over IP Interval Type 1~255 1~255 UNAVAILABLE(UNAV AILABLE), Enumeration AVAILABLE(AVAILAB UNAVAILABLE, Type LE) AVAILABLE None None GBFD118605 IP QOS GBFD118605 IP QOS Interval Type 0~100 BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, Enumeration AF33, AF41, AF42, Type AF43, EF 0~100 per cent BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF None GBFD118605 IP QOS Interval Type 0~7 0~7 None GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD111705 GSM Flow Control Interval Type 0~7 0~7 None GBFD111705 GSM Flow Control Interval Type 30~100 30~100 per cent GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, Enumeration AF33, AF41, AF42, Type AF43, EF BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF None GBFD118605 IP QOS Interval Type 0~7 0~7 None GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD111705 GSM Flow Control Interval Type 0~7 0~7 None None None Enumeration Type ON(ON), OFF(OFF) ON, OFF None GBFD111804 A Interface Protocol Process Interval Type 40000~50000 A Interface Protocol Process Interval Type 5000~150000 A Interface Protocol Process Interval Type 1000~2000 A Interface Protocol Process Interval Type 400~600 A Interface Protocol Process Interval Type 7500~9500 A Interface Protocol Process Interval Type 80~120 A Interface Protocol Process Interval Type 3000~6000 40000~50000 ms GBFD111804 5000~150000 ms GBFD111804 1000~2000 ms GBFD111804 400~600 ms GBFD111804 7500~9500 ms GBFD111804 80~120 ms GBFD111804 3000~6000 ms GBFD111804 A Interface Protocol Process Interval Type 500~2000 A Interface Protocol Process Interval Type 1~100 500~2000 ms GBFD111804 1~100 ms WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent GBFD118201 SoftSynchroniz ed Network Interval Type 1~16777215 1~16777215 None GBFD114101 GPRS Enumeration 4BURST(4Burst), Type RLC/MAC(RLC/MAC) 4BURST, RLC/MAC None GBFD111202 O&M of BTS Remote Electrical Tilt Remote Electrical Tilt Remote Electrical Tilt Remote Electrical Tilt NO(Cancel Control Enumeration Flag), YES(Set Control Type Flag) YES, NO None MRFD210602 Interval Type 0~62 0~62 None MRFD210602 Interval Type 0~5 0~5 None MRFD210602 Interval Type 0~23 0~23 None MRFD210602 Interval Type 0~254 0~254 None GBFD118605 IP QOS 0,2,4,8,10,12,14,16,18, 0, 2, 4, 8, 10, 12, 14, 16, Interval Type 20,22,24,26 18, 20, 22, 24, 26 None GBFD111202 O&M of BTS Interval Type 0~27,255 0~27, 255 None GBFD111202 MRFD210301 O&M of BTS Interval Type 0~11,255 Configuratio n Manageme Enumeration nt Type ON(ON), OFF(OFF) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) 0~11, 255 None ON, OFF None GBFD111804 NO, YES None GBFD111202 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110204 GBFD111203 MRFD210305 O&M of BTS Interval Type 0~99 HUAWEI I Handover HUAWEI II Handover Interval Type 1~31 HUAWEI I Handover HUAWEI II Handover Interval Type 1~31 NT14_5K~0 NT12K~1 NT6K~2 T14_4K~3 G3 Fax T9_6K~4 T4_8K~5 (TS61, T2_4K~6 T1_2K~7 TS62)of Bit Field Type T600_BITS~8 O&M BSC Security Manageme Enumeration NOLIMIT(No Limit), nt Type LIMIT(Limit) 0~99 None TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms NT14_5K, NT12K, NT6K, T14_4K, T9_6K, T4_8K, T2_4K, T1_2K, T600_BITS, T1200_75 None NOLIMIT, LIMIT None GBFD111203 GBFD111602 O&M of Compound BSC Type YEAR, MONTH, DAY TRX Power Amplifier Intelligent Shutdown Interval Type 1~12 2000-1-1~2099-12-31 None 1~12 None GBFD111202 O&M of BTS Interval Type 1~31 1~31 None GBFD111202 O&M of BTS Interval Type 0~30 0~30 degree Celsius GBFD114501 Co-BCCH Cell Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network Enumeration Inner(Inner), Type Extra(Extra) Inner, Extra None GBFD114402 Interval Type 0~2047 0~2047 None GBFD114402 String Type None 1~64 characters None GBFD114402 Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 350~556 43.3~55.5 (step: 0.1) V MRFD210304 Faulty Manageme nt Interval Type 580~600 Faulty Manageme nt Interval Type 433~555 58.0~60.0 (step: 0.1) V MRFD210304 43.3~55.5 (step: 0.1) V GBFD111202 O&M of BTS Interval Type 580~600 58.0~60.0 (step: 0.1) V GBFD113101 GBFD111004 PDCH Dynamic Adjustment Interval Type 0~32 Radio Dedicated Channel Manageme nt Interval Type 500~60000 0~32 None 500~60000 ms GBFD118602 GBFD111203 MRFD210305 A over IP Interval Type 0~186 O&M of BSC Security Manageme nt String Type None 0~186 None 1~110 characters None GBFD111202 O&M of BTS Enumeration INACTIVE(Inactive), Type ACTIVE(Active) INACTIVE, ACTIVE None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None GBFD510701 None Interval Type 1~1000 Compact BTS Automatic Configuratio Enumeration n and Type BSC, BTS 1~1000 None BSC, BTS None GBFD111202 O&M of BTS Enumeration BTS, BSC, DXX, Type OTHER BTS, BSC, DXX, OTHER None MRFD211402 MBSC Load Balancing Interval Type 0~27 0~27 None MRFD211402 MBSC Load Balancing Interval Type 0~11 {0~11} None MRFD211402 MRFD210301 MBSC Load Balancing Interval Type 0~7 Configuratio n Manageme nt Interval Type 0~3071 0~7 None 0~3071 None GBFD111203 GBFD118609 O&M of BSC IP Fault Detection Based on BFD Interval Type 0~255 0~255 s Interval Type 3~10 3~10 None GBFD111202 O&M of BTS Remote Electrical Tilt Enumeration Type OFF(OFF), ON(ON) OFF, ON None MRFD210602 String Type None 0~50 characters None MRFD210602 GBFD118611 GBFD118622 Remote Electrical Tilt Interval Type 0~35 Abis IP over E1/T1 A IP over IP Address E1/T1 Type None 0~35 None 0.0.0.0~255.255.255.255 None None GBFD114301 GBFD114302 Enumeration LOGIC_IP(Logical IP None Address) GSM/WCD Type MA Interoperabi lity GSM/TDInterval Type 0~16383 LOGIC_IP None 0~16383 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 O&M of BTS Interval Type 0~254 0~254 None GBFD117401 GBFD111203 MRFD210305 Enumeration MSC Pool Type O&M of BSC Security Manageme Enumeration nt Type NO(Not Default DPC), YES(Default DPC) NO, YES DEFAULTPORT(Defa ult 21 Port), CUSTOMPORT(Custo DEFAULTPORT, m Port) CUSTOMPORT None None None None Interval Type 1~60 1~60 min GBFD111202 O&M of BTS IP Address Type None 0.0.0.0~255.255.255.255 None GBFD111202 O&M of BTS Interval Type 0~63 0~63 None GBFD111202 GBFD110608 GBFD111005 O&M of BTS SDCCH Handover Enhanced Channel Assignment Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None GBFD111203 O&M of BSC GBFD111203 GBFD111203 MRFD210403 O&M of BSC of O&M BSC License Manageme nt String Type Enumeration Type NO(No), YES(Yes) MON_1(No.1), MON_2(No.2), MON_3(No.3), Enumeration MON_4(No.4), Type MON_5(No.5), SUN(Sunday), MON(Monday), TUE(Tuesday), Enumeration WED(Wednesday), Type THU(Thursday), NO, YES None MON_1~MON_31 None SUN, MON, TUE, WED, THU, FRI, SAT None None 1~128 characters None GBFD111202 O&M of BTS String Type None 1~256 characters None GBFD110607 Enumeration Direct Retry Type NO(No), YES(Yes) NO, YES None GBFD110607 Enumeration Direct Retry Type NO(No), YES(Yes) NO, YES None GBFD110601 GBFD110601 GBFD510501 GBFD114301 HUAWEI I Handover HUAWEI I Handover HUAWEI II Handover GSM/WCD MA Interoperabi lity Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~15 0~15 s Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510804 Downlink EGPRS2-A Interval Type 4~32 0.5~4, step: 1/8 bit GBFD510804 Downlink EGPRS2-A Interval Type 4~32 0.5~4, step: 1/8 bit GBFD114201 EGPRS Interval Type 4~32 0.5~4, step: 1/8 bit GBFD115902 GBFD117601 GBFD117601 Transmit Diversity HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Enumeration Type N0(No), YES(Yes) Interval Type 0~255 NO, YES TCH:480~122400, step:480; SDCCH:470~119850, step:470 None ms Interval Type 1~30 1~30 dB GBFD117601 GBFD117601 GBFD117601 HUAWEI III Power Control Algorithm Interval Type 1~30 HUAWEI III Power Control Algorithm Interval Type 1~30 HUAWEI III Power Control Algorithm Interval Type 1~30 1~30 dB 1~30 dB 1~30 dB GBFD510002 GBFD119501 Gb Over FR Interval Type 16~1007 Adaptive Adjustment of Uplink and Downlink Interval Type 1~255 Dual Carriers in Downlink HUAWEI I Handover HUAWEI II Handover HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) 16~1007 None 1~255 None GBFD510802 GBFD110601 GBFD510501 UNSUPPORT, SUPPORT None Interval Type 0~63 0~63 dB GBFD117601 Interval Type 1~10 1~10 None GBFD117601 Interval Type 1~30 1~30 dB GBFD117601 Interval Type 1~30 1~30 dB GBFD114101 GBFD117601 GPRS Interval Type 0~127 HUAWEI III Power Control Algorithm Interval Type 1~30 0~127 None 1~30 dB GBFD117601 HUAWEI III Power Control Algorithm Interval Type 1~30 1~30 dB GBFD115501 AMR FR Interval Type 0~15 0~15 None GBFD115501 AMR FR Interval Type 0~15 0~15 None GBFD115501 AMR FR Interval Type 0~15 0~15 None GBFD115502 AMR HR Interval Type 0~15 0~15 None GBFD115502 AMR HR Interval Type 0~15 0~15 None GBFD115502 AMR HR Interval Type 0~15 0~15 None GBFD115507 WB AMR Interval Type 0~15 0~15 None GBFD115507 GBFD110601 GBFD510501 GBFD110601 GBFD510501 WB AMR Interval Type 0~15 HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 HUAWEI I Handover HUAWEI II Handover Interval Type 0~70 0~15 None 0~63 dB 0~70 None MRFD211402 MBSC Load Balancing Interval Type 1~100 1~100 None GBFD110703 GBFD115506 GBFD115506 GBFD115506 GBFD115506 GBFD117601 GBFD117601 Enhanced Power Control Algorithm AMR Coding Rate Threshold Adaptive AMR Coding Rate Threshold Adaptive AMR Coding Rate Threshold Adaptive AMR Coding Rate Threshold Adaptive HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms Interval Type 2~255 2~255 None Interval Type 2~255 2~255 None Interval Type 2~255 2~255 None Interval Type 2~255 2~255 None Interval Type 1~30 1~30 dB Interval Type 1~30 1~30 dB MRFD211402 GBFD110703 GBFD110703 GBFD110703 GBFD110703 MBSC Load Balancing Enhanced Power Control Algorithm Enhanced Power Control Algorithm Enhanced Power Control Algorithm Enhanced Power Control Algorithm Interval Type 1~100 1~100 None Interval Type 0~3 0~3 None Interval Type 0~7 0~7 None Interval Type 0~7 0~7 None Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms GBFD110703 GBFD110703 GBFD110601 GBFD510501 Enhanced Power Control Algorithm Interval Type 0~7 Enhanced Power Control Algorithm Interval Type 0~63 HUAWEI I Handover HUAWEI II Handover Interval Type 0~70 0~7 None 0~63 dB 0~70 None GBFD115501 AMR FR Interval Type 0~70 0~70 None GBFD115502 GBFD117601 GBFD117601 GBFD117601 GBFD117601 GBFD117601 GBFD117601 GBFD117601 AMR HR HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Interval Type 0~70 0~70 None Interval Type 0~10 0~10 None Interval Type 0~19 TCH:0~9120, step:480; SDCCH:0~8930, step:470 ms Interval Type 0~63 0~63 dB Interval Type 0~63 0~63 dB Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms Interval Type 0~10 0~10 None Interval Type 0~19 TCH:0~9120, step:480; SDCCH:0~8930, step:470 ms GBFD117601 GBFD117601 GBFD117601 GBFD110703 GBFD110703 HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Enhanced Power Control Algorithm Enhanced Power Control Algorithm Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms Interval Type 0~100 0~100 None Interval Type 0~100 0~100 None Interval Type 0~63 0~63 dB Interval Type 0~63 0~63 dB GBFD119203 GBFD510301 GBFD510302 GBFD510301 GBFD510302 Extended Uplink TBF Interval Type 0~300 Public Voice Group Call Service Public Interval Type 0~255 Voice Group Call Service Public Interval Type 1~255 0~300 ms 0~255 s 1~255 None GBFD115501 AMR FR Interval Type 0~63 0~63 dB GBFD115501 AMR FR Interval Type 0~63 0~63 dB GBFD115501 AMR FR Interval Type 0~63 0~63 dB GBFD115502 AMR HR Interval Type 0~63 0~63 dB GBFD115502 AMR HR Interval Type 0~63 0~63 dB GBFD115502 AMR HR Interval Type 0~63 0~63 dB GBFD115507 WB AMR Interval Type 0~63 0~63 dB GBFD115507 WB AMR Interval Type 0~63 0~63 dB GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Clock over IP support 1588V2 Interval Type 0~255 0~255 None GBFD118620 Interval Type 0~255 0~255 None GBFD119106 Coding Scheme GBFD114201 GBFD510804 GBFD510804 Enumeration CS1(CS1), CS2(CS2), Type CS3(CS3), CS4(CS4) MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Enumeration MCS4(MCS4), EGPRS Type MCS5(MCS5), MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Downlink Enumeration MCS4(MCS4), EGPRS2-A Type MCS7(MCS7), MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Downlink Enumeration MCS4(MCS4), EGPRS2-A Type MCS7(MCS7), CS1, CS2, CS3, CS4 None MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9 None MCS1, MCS2, MCS3, MCS4, MCS7, MCS8, DAS5, , DAS6, DAS7, DAS8, DAS9, DAS10, DAS11,MCS2, MCS3, None MCS1, DAS12 MCS4, MCS7, MCS8, DAS5, , DAS6, DAS7, DAS8, DAS9, DAS10, DAS11, DAS12, UNFIXED None GBFD119106 Coding Scheme CS1(CS1), CS2(CS2), Enumeration CS3(CS3), CS4(CS4), CS1, CS2, CS3, CS4, Type UNFIXED(UNFIXED) UNFIXED None GBFD114201 GBFD110703 GBFD117601 GBFD110203 EGPRS Enhanced Power Control Algorithm HUAWEI III Point To Point Short Message Service (TS21, MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Enumeration MCS4(MCS4), Type MCS5(MCS5), MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9, UNFIXED None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114101 GPRS Interval Type 0~5000 0~5000 ms GBFD119106 Coding Scheme Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 0~64 per cent GBFD119106 Coding Scheme Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 Faulty Manageme Enumeration CLOSE(Close), nt Type OPEN(Open) Active Power Control 0~64 per cent MRFD210304 CLOSE, OPEN None GBFD117602 Interval Type 0~255 0~25.5, step:0.1 dB GBFD111804 A Interface Protocol Process Interval Type 1~16777215 A Interface Protocol Process String Type None A Interface Circuit Manageme nt Interval Type 0~31 A Interface Circuit Manageme nt Interval Type 0~31 1~16383(BIT14), 1~65535(BIT16), 1~16777215(BIT24) None GBFD111804 1~11 characters None GBFD111803 0~31 None GBFD111803 0~31 None GBFD117401 MSC Pool Interval Type 0~31 0~31 None GBFD111804 A Interface STP(STP), A(A), Protocol Enumeration IUR_G(IUR_G), Process Type LB(LB) A Interface Protocol Process Interval Type 0~186 STP, A, IUR_G, LB None GBFD111804 0~186 None MRFD211402 GBFD110601 GBFD510501 GBFD111004 GBFD111004 GBFD111004 MBSC Load Balancing HUAWEI I Handover HUAWEI II Handover Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Interval Type 0~182 0~182 None Interval Type 0~128 0~128 dB Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 GBFD111004 Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None Interval Type 0~1 0~1 None GBFD111004 GBFD111004 GBFD111004 Radio Dedicated Channel Manageme nt Interval Type 0~1 Radio Dedicated Channel Manageme nt Interval Type 0~1 Radio Dedicated Channel Manageme nt Interval Type 0~1 0~1 None 0~1 None 0~1 None None None Interval Type 10~150 10~150 ms None None Interval Type 10~150 10~150 ms None None Interval Type 10~150 10~150 ms None None Interval Type 10~150 10~150 ms None None Interval Type 10~150 10~150 ms None GBFD111605 GBFD111605 GBFD111605 None Active Backup Power Control Active Backup Power Control Active Backup Power Control Interval Type 10~150 10~150 ms Interval Type 1~60 1~60 min Interval Type 0~12 0~12 h Interval Type 2~10 2~10 dB GBFD113602 GBFD114802 Simplified Cell Broadcast Discontinuo us Reception (DRX) Enumeration Type NO(No), YES(Yes) 0(0), 1(1), 2(2), 4(4), Enumeration 8(8), 16(16), 32(32), Type 64(64) NO, YES None 0, 1, 2, 4, 8, 16, 32, 64 s GBFD111202 GBFD118611 GBFD118622 GBFD118611 GBFD118622 O&M of BTS Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Enumeration INACTIVE(Inactive), Type ACTIVE(Active) INACTIVE, ACTIVE None Interval Type 0~335 0~335 None Interval Type 0~335 0~31(PEUa), 0~251(E1 of POUc), 0~335(T1 of POUc) None GBFD118602 A over IP Interval Type 0~63 0~63 None None None Interval Type 0~63 0~63 None None None Interval Type 0~63 0~63 None GBFD118605 IP QOS Interval Type 0~63 0~63 None GBFD114101 MRFD210301 MRFD210301 GPRS Interval Type 1~3600 Configuratio n Manageme nt Interval Type 0~27 Configuratio n Manageme nt Interval Type 0~21 1~3600 s 0~27 None 0 to 21 None MRFD210304 MRFD210301 Faulty Manageme nt Interval Type 0~21 Configuratio n Manageme nt Interval Type 0~21 0~21 None 0~21 None GBFD114101 GPRS Interval Type 0~21 0~21 None GBFD114101 MRFD210301 GPRS Interval Type 0~30 Configuratio n Manageme Enumeration nt Type NO(NO), YES(YES) 0~30 s YES, NO None GBFD111202 O&M of BTS String Type None 1~128 characters None None GBFD118609 None IP Fault Detection Based on BFD IP Address Type None 0.0.0.0~255.255.255.255 None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None None None Interval Type 0~335 0~335 None None None TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, Bit Field Type TS15, TS16, TS17, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD110607 GBFD510301 Direct Retry Interval Type 0~100 Public Voice Group Call Enumeration Service Type NO(No), YES(Yes) 0~100 per cent NO, YES None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Interval Type 1~12 1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), Enumeration 9(9), 10(10), 11(11), Type 12(12) 1~12 None 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 None GBFD111202 O&M of BTS Interval Type 0~1 0, 1 None GBFD111202 O&M of BTS Interval Type 0~1,255 0~1, 255 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 O&M of BTS Interval Type 0~23,255 0~23, 255 None GBFD111202 O&M of BTS Interval Type 0~53 0~53 None GBFD111202 GBFD113521 O&M of BTS Interval Type 0~53,255 Encrypted Network Manageme Enumeration nt Type OFF(Off), ON(On) 0~53, 255 None OFF, ON None GBFD118601 Enumeration FULL(FULL), Abis over IP Type HALF(HALF) FULL, HALF None GBFD111207 BTS Test Function Interval Type 0~12 0~12 h GBFD111207 BTS Test Function Interval Type 1~24 1~24 h GBFD111207 BTS Test Function Interval Type 0~59 0~59 min GBFD111207 BTS Test Function Interval Type 0~59 0~59 s GBFD113101 PDCH Dynamic Adjustment Interval Type 10~80 SoftSynchroniz ed Network Interval Type 0~63 10~80 None GBFD118201 0~63 None GBFD111202 O&M of BTS Interval Type 0~2047 0~2047 None GBFD111203 O&M of BSC Interval Type 0~2047 0~2047 None GBFD111202 O&M of BTS Interval Type 0~15 0~15 None GBFD113101 GBFD113101 PDCH Dynamic Adjustment Interval Type 10~3600 10~3600 s LEVEL0(Preempt all dynamic TCHFs), PDCH LEVEL1(No preempt Dynamic Enumeration of CCHs), LEVEL2(No Adjustment Type preempt of service LEVEL0, LEVEL1, LEVEL2 None GBFD113101 GBFD111602 GBFD118101 PDCH Dynamic Adjustment Interval Type 0~8 TRX Power Amplifier Intelligent Enumeration Shutdown Type NO(No), YES(Yes) NOTSUPPORT(Not Dynamic Support), Transmit Enumeration DDIVERSITY(DDIVER Diversity Type SITY), DPBT(DPBT) 0~8 None NO, YES None NOTSUPPORT, DDIVERSITY, DPBT None GBFD111202 O&M of BTS Interval Type 1~60 1~60 min GBFD111202 GBFD118401 GBFD111207 O&M of BTS Interval Type 0~7 Abis Transmissio n Optimizatio n Interval Type 0~31 ACTIVE(ACTIVE TMU/MMU/IOMU/DO MU), BTS Test Enumeration ACTIVESTANDBY(AC Function Type TIVE/STANDBY TMU), 0~7 None 0~31 ACTIVE, ACTIVESTANDBY, SLAVE1, SLAVE2, UTRP None None None None Interval Type 0~83 0~83 None MRFD210501 MRFD211501 BTS/NodeB Clock Interval Type 0~7 IP-Based 2G/3G CoTransmissio n on Base Station Side Interval Type 16~19 0~7 None 16~19 None MRFD210501 BTS/NodeB Enumeration Clock Type E1(E1), T1(T1) E1, T1 None GBFD118605 IP QOS IP Address Type None 0.0.0.0~255.255.255.255 None GBFD114301 GBFD114301 GSM/WCD MA Interoperabi lity Interval Type 0~49 GSM/WCD MA Interoperabi lity Interval Type 0~49 System Information Enumeration Sending Type NO(No), YES(Yes) Faulty Manageme nt Interval Type 1~2147483646 0~49 dB 0~49 dB GBFD111101 NO, YES None MRFD210304 1~2147483646 None GBFD111203 O&M of BSC Compound Type year, month, date 2000-1-1~2037-12-31 None MRFD210304 Faulty Manageme Compound nt Type Faulty Manageme Compound nt Type year, month, day 2000-1-1~2037-12-31 None MRFD210304 year, month, day 2000-1-1~2037-12-31 None GBFD111202 MRFD210301 O&M of Compound BTS Type year, month, day Configuratio n Manageme nt Interval Type 1~31 Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network 2000-01-01~2050-12-31 None 1~31 d GBFD114402 Interval Type 1~255 1~255 s GBFD114402 Interval Type 1~255 1~255 s GBFD114402 Interval Type 0~11 0~11 None GBFD114201 EGPRS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD110601 HUAWEI I Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD110601 HUAWEI I Handover Interval Type 1~32 NO(Effect Later), Enumeration YES(Effect Type Immediately) 0.5~16, step:0.5 s GBFD111202 O&M of BTS 11-Bit EGPRS Access Uplink EGPRS2-A Downlink EGPRS2-A NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) YES, NO None GBFD119201 GBFD510803 GBFD510804 Enumeration Type NO(NO), YES(YES) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD116201 Interval Type 0~31 0~31 None GBFD116201 Interval Type 0~31 0~31 None MRFD210301 DATE(Input with date), Configuratio WEEK(Input with n week), Manageme Enumeration DATEWEEK(Input with DATE, WEEK, nt Type date and week) DATEWEEK Emergency Call Service (TS12) Interval Type 1~15 A Interface Protocol Process Abis IP over E1/T1 A IP over E1/T1 None GBFD110202 1~15 None GBFD111804 GBFD118611 GBFD118622 Enumeration Type OFF(OFF), ON(ON) ERR_PFM_5E6(OCC UR:5E-6), ERR_PFM_1E5(OCC Enumeration UR:1E-5), Type ERR_PFM_5E5(OCC OFF, ON ERR_PFM_5E6, ERR_PFM_1E5, ERR_PFM_5E5, ERR_PFM_1E4, ERR_PFM_5E4, None None GBFD111202 GBFD115001 GBFD510307 GBFD115001 O&M of BTS Enhanced Interval Type 0~63 Multi Level Precedence and Enumeration Preemption Type NO(No), YES(Yes) NoPriority(No Priority), Priority4(Priority 4), Priority3(Priority3), Group Call Enumeration Priority2(Priority 2), EMLPP Priority1(Priority 1), Enhanced Type Multi Level Precedence and Enumeration Preemption Type NO(No), YES(Yes) 0~63 None NO, YES NoPriority, Priority4, Priority3, Priority2, Priority1, Priority0, PriorityB, PriorityA None None NO, YES None GBFD111202 O&M of BTS Interval Type 0~7 0~7 None GBFD118605 IP QOS Interval Type 0~7 0~7 None GBFD111202 MRFD210301 O&M of BTS Interval Type Configuratio n Manageme Enumeration nt Type 2~4094 JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), 2~4094 JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC None None None None Group Call Reliability Enhancing IP Address Type None 0.0.0.0~255.255.255.255 None GBFD510309 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 GBFD113501 GBFD113503 O&M of BTS and A5/1 A5/2 Ciphering Algorithm A5/1 Enumeration ENABLED(Enabled), Type DISABLED(Disabled) A5/0~0 A5/1~1 A5/2~2 A5/3~3 A5/4~4 A5/5~5 Bit Field Type A5/6~6 A5/7 AUTO(Automatic), PLAINTEXT(Plain Text), Enumeration ENCRYPTED(SSL Type Encrypted) AUTO(Auto), PLAINTEXT(Plain Text), Enumeration ENCRYPTED(SSL Type Encrypte) ENABLED, DISABLED None A5/0, A5/1, A5/2, A5/3, A5/4, A5/5, A5/6, A5/7 None GBFD111203 O&M of BSC AUTO, PLAINTEXT, ENCRYPTED None GBFD111203 GBFD116401 O&M of BSC End-to-End MS Signaling Enumeration Tracing Type NO(No), YES(Yes) Faulty Manageme nt Interval Type 1~65535 A Interface Circuit Manageme nt Interval Type 0~65535 AUTO, PLAINTEXT, ENCRYPTED None NO, YES None MRFD210304 1~65535 None GBFD111803 0~65535 None GBFD111203 GBFD111602 O&M of BSC Interval Type 0~65535 TRX Power Amplifier Intelligent Shutdown Interval Type 1~31 0~65535 None 1~31 None GBFD111202 O&M of BTS Interval Type -990~400 -99.0~40.0 (step: 0.1) degree Celsius GBFD111602 JAN(Jan.), FEB(Feb.), TRX Power MAR(Mar.), APR(Apr.), Amplifier MAY(May), JUN(Jun.), JAN, FEB, MAR, APR, Intelligent Enumeration JUL(Jul.), AUG(Aug.), MAY, JUN, JUL, AUG, Shutdown Type SEP(Sep), OCT(Oct.), SEP, OCT, NOV, DEC None GBFD111202 GBFD111602 GBFD111801 GBFD111803 O&M of BTS TRX Power Amplifier Intelligent Shutdown Ater Interface 4:1 Multiplexing A Interface Circuit Manageme nt Enumeration Type 0(0), 2(2), 4(4), 6(6) 0, 2, 4, 6 None Compound Type hour, min 00:00~23:59 None Interval Type 8~255 8~255 None Interval Type 1~31 1~31, step:8 None GBFD111202 O&M of BTS Interval Type 1~31 1~31 None GBFD111203 O&M of BSC DISABLED(Prohibit to Enumeration Use), Type ENABLED(Available) DISABLED, ENABLED DISABLED(Prohibit to Enumeration Use), Type ENABLED(Available) DISABLED, ENABLED None GBFD111203 O&M of BSC None GBFD113201 MRFD211503 Concentric Cell 2G/3G Co- Interval Type 0~100 Transmissio n Resources Enumeration Manageme Type OFF(OFF), ON(ON) 0~100 per cent OFF, ON None GBFD113201 Concentric Cell Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD113201 Concentric Cell Interval Type 1~255 1~255 s GBFD113201 Concentric Cell Interval Type 0~63 0~63 dB GBFD113201 Concentric Cell Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD118605 IP QOS Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD113201 GBFD113402 GBFD118602 GBFD118602 Concentric Cell Interval Type 0~100 Dynamic Adjustment Between Enumeration FR and HR Type NO(No), YES(Yes) M3UA_ASP~0||(M3UA _ASP)$$(M3UA_ASP) ** Enumeration M3UA_IPSP(M3UA_A A over IP Type SP)** M3UA_SGP(M3UA SGP), M3UA_IPSP(M3UA Enumeration IPSP), A over IP Type M3UA_SS7SP(M3UA 0~100 per cent NO, YES None M3UA_ASP, M3UA_IPSP None M3UA_SGP, M3UA_IPSP, M3UA_SS7SP, M3UA_SP None GBFD113201 GBFD115704 GBFD111203 MRFD210305 Concentric Cell Enhanceme nt Packet Loss Concealme nt(EPLC) O&M of BSC Security Manageme nt Interval Type 0~63 0~63 dB Enumeration Type OFF(Off), ON(On) OFF, ON None Interval Type 1~4294967295 1~4294967295 None GBFD110202 Emergency Call Service Enumeration (TS12) Type NO(No), YES(Yes) NO, YES None None None O1E3_R5E4(OCCUR: 1E-3, RECOVERY:5E4), O1E3_R5E4, O5E4_R1E4, Enumeration O5E4_R1E4(OCCUR: O1E4_R5E5, O5E5_R1E5, Type 5E-4, RECOVERY:1E- O1E5_R5E6, O5E6_R1E6 None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111202 O&M of BTS Interval Type 0~63 0~63 None GBFD111202 O&M of BTS Interval Type 0~7 0~7 None GBFD118605 IP QOS Interval Type 0~7 0~7 None GBFD111202 O&M of BTS Faulty Manageme nt Assignment and Immediate Assignment Simple Mode LCS(Cell ID + TA) Fast Ring Network Switch Configuratio n Manageme nt O&M of BSC Security Manageme nt Interval Type 2~4094 2~4094 None MRFD210304 Interval Type 1~2147483646 1~2147483646 None GBFD110502 Interval Type 500~60000 500~60000 ms GBFD115403 Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD117802 Interval Type 0~255 0~255 s MRFD210301 GBFD111203 MRFD210305 Compound Type HOUR, MIN, SEC HOUR, MIN, SEC None Compound Type year, month, date, hour, min, sec 2000-1-1 00:00:00~203712-31 23:59:59 None GBFD111203 O&M of BSC Compound Type GBFD111203 GBFD111203 MRFD210305 O&M of BSC of O&M BSC Security Manageme Compound nt Type Faulty Manageme Compound nt Type Faulty Manageme Compound nt Type Simplified Cell Broadcast O&M of BSC Security Manageme nt hour, min 00:00~23:59 ONE_BY_ONE(Execut e One by One), Enumeration PARALLEL(Parallel ONE_BY_ONE, Type Execute) PARALLEL None None year, month, date, hour, min, sec 2000-1-1 00:00:00~203712-31 23:59:59 None MRFD210304 hour, min, sec 00:00:00~23:59:59 None MRFD210304 hour, min, sec 00:00:00~23:59:59 None GBFD113602 GBFD111203 MRFD210305 Compound Type year, month, day, hour, 1970-1-1 00:00:00~2538min, sec 12-31 23:59:59 None Compound Type year, month, day 2000-1-1~2037-12-31 None GBFD111202 GBFD111203 MRFD210305 GBFD111203 MRFD210305 MRFD210301 MRFD210301 O&M of BTS of O&M BSC Security Manageme nt O&M of BSC Security Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Compound Type hour, min, sec LOGINEVENT(Login Event), MANAGEEVENT(Man Enumeration agement Event), Type AUTHEVENT(Authenti 00:00:00~23:59:59 LOGINEVENT, MANAGEEVENT, AUTHEVENT, OTHEREVENT None None Compound Type hour, min, sec SUN(Sunday), MON(Monday), TUE(Tuesday), Enumeration WED(Wednesday), Type THU(Thursday), FIRST(First), SECOND(Second), THIRD(Third), Enumeration FOURTH(Fourth), Type LAST(Last) 00:00:00~23:59:59 None SUN, MON, TUE, WED, THU, FRI, SAT None FIRST, SECOND, THIRD, FOURTH, LAST None MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt String Type None 1~9 characters V or A String Type None 1~9 characters V or A Enumeration VOLTAGE(Voltage), Type CURRENT(Current) VOLTAGE, CURRENT None String Type None 1~9 characters V or A String Type None 1~9 characters V or A String Type None 1~9 characters V or A String Type None 1~9 characters V or A Enumeration VOLTAGE(Voltage), Type CURRENT(Current) VOLTAGE, CURRENT None String Type None 1~9 characters V or A String Type None 1~9 characters V or A String Type None 1~9 characters V or A String Type None 1~9 characters V or A MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Enumeration VOLTAGE(Voltage), Type CURRENT(Current) VOLTAGE, CURRENT None String Type None 1~9 characters V or A String Type None 1~9 characters V or A String Type None 1~9 characters V or A String Type None 1~9 characters V or A Enumeration VOLTAGE(Voltage), Type CURRENT(Current) VOLTAGE, CURRENT None String Type None 1~9 characters V or A String Type None 1~9 characters V or A GBFD114101 GPRS NoExclusive(NoExclusi Enumeration ve), Type Exclusive(Exclusive) NoExclusive, Exclusive None GBFD111203 O&M of BSC Active Power Control Active Power Control Interval Type 0~100 0~100 per cent GBFD117602 Interval Type 0~63 0~63 dB GBFD117602 Interval Type 0~63 0~63 dB MRFD210301 Configuratio n Manageme nt Interval Type 2048~5047 2048~5047 None GBFD111202 MRFD210301 O&M of BTS String Type None Configuratio n Manageme nt Interval Type 5048~8047 1~64 characters None 5048~8047 None GBFD111202 MRFD210301 MRFD210301 O&M of BTS String Type None Configuratio n Manageme nt Interval Type 2048~5047 Configuratio n Manageme nt String Type None 1~64 characters None 2048~5047 None 1~64 characters None GBFD114001 Extended Cell Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD111202 GBFD110801 GBFD110802 GBFD110801 GBFD110802 GBFD110801 GBFD110802 O&M of BTS Processing of Measureme nt Report PreProcessing of Measureme nt Report PreProcessing of Measureme nt Report Pre- Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type EM0(EM0), EM1(EM1) 60sec(60sec), 120sec(120sec), 240sec(240sec), Enumeration 480sec(480sec), Type 960sec(960sec), EM0, EM1 None 60sec, 120sec, 240sec, 480sec, 960sec, 1920sec, 3840sec, 7680sec s GBFD114001 Extended Cell TYPE1(TYPE1), Enumeration TYPE2(TYPE2), Type TYPE3(TYPE3) TYPE1, TYPE2, TYPE3 Normal_cell(Normal cell), DualTS_ExtCell(Doubl Enumeration e Timeslot Extension Normal_cell, Type Cell) DualTst_ExtCell None None GBFD119203 GBFD510301 GBFD510302 SEND(SEND), Extended Enumeration NOTSEND(NOTSEND Uplink TBF Type ) SEND, NOTSEND Public Voice Group Call Service Public Interval Type 0~255 0~12750, step: 50 None ms GBFD510307 Group Call EMLPP Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510307 Group Call EMLPP Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 GBFD111005 GBFD110601 GBFD510501 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 O&M of BTS Enhanced Channel Assignment Algorithm HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Enumeration Type OFF(OFF), ON(ON) OFF, ON None Enumeration Type OFF(Off), ON(On) OFF, ON None Interval Type 0~63 PLUS_1(Current FanSpeed Plus 1), Enumeration MINUS_1(Current Type FanSpeed Minus 1) 0~63 dB PLUS_1, MINUS_1 None Enumeration HIGH_SPEED, Type LOW_SPEED HIGH_SPEED, LOW_SPEED None Interval Type 55~100 CONTINUOUS(Contin uous), DISCRETE(Discrete), Enumeration DUTY_RATIO(Duty Type Ratio) NORMAL_FAN(Norma l Fan), Enumeration IND_FAN(Independent Type Fan) 55~100 None CONTINUOUS, DISCRETE, DUTY_RATIO None NORMAL_FAN, IND_FAN None MRFD210301 MRFD210301 GBFD110502 Configuratio n Manageme nt Configuratio n Manageme nt Assignment and Immediate Assignment Fast Ring Network Switch NO_SPEED_ADJUST MENT(No Speed Adjustment), Enumeration HW_AUTO_TEMPER Type ATURE_CONTROL(A IND_FAN(Independent Fan), Enumeration NORMAL_FAN(Norma Type l Fan) NO_SPEED_ADJUSTME NT, HW_AUTO_TEMPERATU RE_CONTROL, SPECIFY_RATE, None IND_FAN, NORMAL_FAN None Interval Type 0~100 0~100 per cent GBFD117802 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111203 O&M of BSC Enumeration Type OFF(Off), ON(On) OFF, ON None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD118601 Enumeration CLOSE(Close), Abis over IP Type OPEN(Open) CLOSE, OPEN None GBFD111705 GSM Flow Control Interval Type 0~100 0~100 per cent None GBFD118611 GBFD118622 GBFD118611 GBFD118622 None Interval Type 0~1999 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~1999 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~1999 0~1999 None 0~1999 None 0~1999 None GBFD118605 IP QOS Interval Type 0~1999 0~1999 None None None Interval Type 10~1999 10~1999 None MRFD210103 Link aggregation Interval Type 0~1999 0~1999 None GBFD111202 GBFD510701 O&M of BTS Interval Type 2~1999 Compact BTS Automatic Configuratio n and Interval Type 0~62 2~1999 None 0~62 None GBFD111202 O&M of BTS Interval Type 0~62 0~62 None GBFD111705 GBFD118611 GBFD118622 GBFD118611 GBFD118622 GSM Flow Control Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~100 None(None), Enumeration 16bit(16bit), Type 32bit(32bit) None(None), Enumeration 16bit(16bit), Type 32bit(32bit) 0~100 per cent None, 16bit, 32bit None None, 16bit, 32bit None WRFD040100 Flow Control Enumeration Type ON, OFF ON, OFF None GBFD111202 GBFD114301 MRFD210301 O&M of BTS GSM/WCD MA Interoperabi lity Configuratio n Manageme nt Interval Type 432~575 43.2~57.5 (step: 0.1) V Enumeration AUTO(Auto), Type MANU(Manu) AUTO, MANU None Enumeration AUTO(Auto), Type MANU(Manu) AUTO, MANU None GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GBFD114301 GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity GSM/WCD MA Interoperabi lity Interval Type 0~7 0~42, step: 6 dB Interval Type 0~7 0~36, Positive infinity, step: 6 dB Interval Type 0~1 0~1 None Interval Type 0~16383 0~16383 None Interval Type 0~49 0~49 dB Interval Type 0~3 0~3 None Interval Type 0~7 -20, -6, -18, -8, -16, -10, 14, -12 dB Interval Type 0~7 0~7 dB Interval Type 0~15 Negative infinity, -28~28, step: 4 dB Enumeration RSCP(RSCP), Type EcN0(Ec/N0) RSCP, EcN0 None Interval Type 0~15 -114~-84, step: 2 dBm Interval Type 0~63 0~63 None GBFD114301 GSM/WCD MA Interoperabi lity Interval Type 0~511 0~511 None WRFD040100 GBFD116801 GBFD116801 GBFD116801 GBFD116801 GBFD116801 GBFD116801 GBFD116801 GBFD116801 GBFD113701 GBFD111203 MRFD210305 Flow Control Voice Quality Index (Uplink VQI) Voice Quality Index (Uplink VQI) Voice Quality Index (Uplink VQI) Voice Quality Index (Uplink VQI) Voice Quality Index (Uplink VQI) Voice Quality Index (Uplink VQI) Voice Quality Index (Uplink VQI) Voice Quality Index (Uplink VQI) Frequency Hopping (RF hopping, baseband O&M of BSC Security Manageme nt Interval Type 1~1000 1~1000 None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~1000 0~1000 per mill Interval Type 0~1000 0~1000 per mill Interval Type 0~1000 0~1000 per mill Interval Type 0~1000 0~1000 per mill Interval Type 0~1000 0~1000 per mill Interval Type 0~1000 0~1000 per mill Interval Type 0~1000 NO_FH(No frequency 0~1000 hopping), BaseBand_FH(Baseba Enumeration nd frequency hopping), NO_FH, BaseBand_FH, Type RF_FH(RF frequency RF_FH, Hybrid_FH per mill None String Type None 1~128 characters None GBFD111203 MRFD210401 GBFD111203 MRFD210305 MRFD210301 GBFD111203 MRFD210304 GBFD116201 GBFD111203 MRFD210305 GBFD117601 O&M of BSC BSC/RNC Software Manageme O&M of BSC Security Manageme nt Configuratio n Manageme nt O&M of BSC Faulty Manageme nt NetworkControlled Cell Reselection (NC2)of O&M BSC Security Manageme nt HUAWEI III Power Control Algorithm String Type None 1~200 characters None String Type None 0~200 characters None String Type None 0~128 characters None Enumeration txt(.txt File), csv(.csv Type File) txt, csv None Interval Type 0~32 0~32 None Enumeration FALSE(Failed), Type TRUE(Succeeded) FALSE, TRUE None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Enumeration INACTIVE(Inactive), Type ACTIVE(Active) INACTIVE, ACTIVE None GBFD117301 Flex Abis Interval Type 0~100 0~100 per cent MRFD210304 Faulty Manageme nt Interval Type 0~65534 Faulty Manageme nt Interval Type 0~65534 Faulty Manageme Enumeration DISABLE(DISABLE), nt Type ENABLE(ENABLE) 0~65534 s MRFD210304 0~65534 s MRFD210304 DISABLE, ENABLE None MRFD210304 Faulty Manageme nt Interval Type 60~65534 60~65534 s MRFD210304 GBFD117301 Faulty Manageme nt Interval Type 60~65534 60~65534 FIX_16K_ABIS(Fix Abis), FLEX_ABIS(Flex Enumeration Abis), FIX_16K_ABIS, Flex Abis Type SEMI_ABIS(Semisolid FLEX_ABIS, SEMI_ABIS s None GBFD117001 GBFD113521 GBFD118201 GBFD119501 GBFD119501 Flex MAIO Encrypted Network Manageme nt SoftAdaptive Adjustment of Uplink and Downlink Adaptive Adjustment of Uplink and Downlink Enumeration Type OFF(Off), ON(On) OFF, ON None Enumeration Type OFF(Off), ON(On) OFF, ON None Interval Type 0~65535 0~65535 ms Interval Type 0~65535 0~65535 ms None GBFD118611 GBFD118622 GBFD118611 GBFD118622 GBFD118605 MRFD211503 None Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 IP QOS 2G/3G CoTransmissio n Resources Enumeration Type OFF(OFF), ON(ON) OFF, ON None Enumeration Type OFF(OFF), ON(ON) OFF, ON None Enumeration Type OFF(OFF), ON(ON) OFF, ON None Enumeration Type OFF(OFF), ON(ON) OFF, ON None MRFD210103 Link Enumeration aggregation Type OFF(OFF), ON(ON) OFF, ON None GBFD111202 O&M of BTS Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~20 0~20 None GBFD110601 HUAWEI I Handover Interval Type 0~200 0~200 None GBFD114101 GBFD111003 Enumeration CLOSE(Close), GPRS Type OPEN(Open) Radio Common Channel Manageme nt Interval Type 0~19 CLOSE, OPEN None 0~19 None GBFD111202 MRFD210301 GBFD111203 MRFD210401 O&M of BTS Configuratio n Manageme nt O&M of BSC BSC/RNC Software Manageme Enumeration INDOOR(Indoor), Type OUTDOOR(Outdoor) INDOOR, OUTDOOR None String Type None 0~128 characters None String Type None 1~100 characters None GBFD111203 MRFD210301 O&M of BSC String Type Configuratio n Manageme nt String Type License Manageme nt String Type None 1~128 characters None None 0~128 characters None MRFD210403 None 0~100 characters None GBFD111202 O&M of BTS String Type None 1~256 characters None GBFD111202 O&M of BTS String Type None 1~256 characters None GBFD114201 EGPRS Enumeration OPEN(Open), Type CLOSE(Close) OPEN, CLOSE None GBFD111804 GBFD115601 A Interface Protocol Process Interval Type 1~300 Automatic Level Control (ALC) Interval Type 0~30 1~300 s 0~30 s GBFD114101 GPRS Enumeration Close(Close), Type Open(Open) Close, Open None GBFD110501 GBFD110601 GBFD510501 Enumeration Call Control Type NO(No), YES(Yes) HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None NO, YES None GBFD111202 O&M of BTS Interval Type 0~31 0~31 None GBFD111202 GBFD118604 GBFD118610 GBFD510701 GBFD510701 GBFD510701 GBFD118611 GBFD118622 O&M of BTS MUX Abis UDP MUX for A Transmissio n Compact BTS Automatic Configuratio n and Compact BTS Automatic Configuratio n and Compact BTS Automatic Configuratio n and Abis IP over E1/T1 A IP over E1/T1 SoftSynchroniz ed Network Configuratio n Manageme nt Discontinuo us Transmissio n (DTX) Downlink Interval Type 0~7 0~7 None Interval Type 1~30 1~30 ms Enumeration Type OFF(OFF), ON(ON) OFF, ON None Enumeration Type OFF(OFF), ON(ON) OFF, ON None Enumeration Type OFF(OFF), ON(ON) OFF, ON None Interval Type 128~1024 128~1024 byte GBFD118201 Interval Type -2715647~2715647 -2715647~2715647 None MRFD210301 Interval Type 0~255 0~255 None GBFD114801 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111203 MRFD210305 GBFD111203 O&M of BSC Security ONTIME(Fixed Time), Manageme Enumeration RELATIVE_T(Relative nt Type Time) ONTIME(Fixed Time), DAILY_T(Day Based Scheduling), O&M of Enumeration DAILY_C(Day Based BSC Type Duration), ONTIME, RELATIVE DAILY_T, DAILY_C, WEEKLY_T, WEEKLY_C, MONTHLY_T, MONTHLY_C None None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 Frequency Band Interval Type 0~1023 0~1023 None GBFD110101 GBFD510101 GBFD510101 MRFD210301 GBFD111005 Frequency Band AFC(Autom atic Frequency Correction) AFC(Autom atic Frequency Correction) Configuratio n Manageme nt Enhanced Channel Assignment Algorithm Cell Frequency Scan Interval Type 0~1023 0~1023 None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~65535 PGSM900(PGSM900), EGSML25(EGSM<L25 >), Enumeration EGSM35M(EGSM<35 Type M>), 0~65535 EGSML25, PGSM900, EGSM35M, RGSML25, GSM900_RGSM39M, DCS1800, PCS1900, GSM850, EGSM24M, None None Interval Type 0~100 0~100 per cent GBFD112401 Interval Type 0~1023 0~1023 None MRFD210301 GBFD510901 GBFD112401 GBFD110601 GBFD510501 GBFD114803 GBFD510701 Configuratio n Manageme Enumeration LOOSE(Loose), nt Type TIGHT(Tight) 2G/3G Neighboring Cell Automatic Optimizatio String Type None MainDiversity(MainDiv Cell ersity), Frequency Enumeration MaximumMeanValue( Scan Type MaximumMeanValue) HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) Discontinuo us May_Use(May Use), Transmissio Shall_Use(Shall Use), n (DTX) Enumeration Shall_NOT_Use(Shall Uplink Type not Use) Compact BTS Automatic Configuratio n and Interval Type 0~23 LOOSE, TIGHT None 1~800 characters None MainDiversity, MaximumMeanValue None NO, YES None May_Use, Shall_Use, Shall_NOT_Use None 0~23 None GBFD111202 GBFD510701 O&M of BTS Interval Type 0~23 Compact BTS Automatic Configuratio n and Interval Type 0~255 0~23 None 0~255 None GBFD111202 GBFD111203 MRFD210305 O&M of BTS of Interval Type 0~254 0~254 O&M BSC Security Manageme Enumeration TXT(Plain Text Type), nt Type CSV(CSV Type) TXT, CSV None None GBFD118605 IP QOS Interval Type 0~33 0~33 None GBFD118605 IP QOS Interval Type 1~33 1~33 None GBFD111202 O&M of BTS Interval Type 0~33 0~33 None GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~600 0~600 s GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~600 0~600 s GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~200000 0~200000 kbit/s MRFD211402 MBSC Load Balancing Interval Type 0~200 -100~100 per cent MRFD211402 MBSC Load Balancing Interval Type 0~100 0~100 None GBFD118602 A over IP Enumeration Type A0, U1 A0, U1 None GBFD119115 Power Control Interval Type 0~31 0~31 None GBFD118201 SoftSynchroniz Compound ed Network Type hour, min hour{0~23} min{0~59} None GBFD118201 SoftSynchroniz ed Network Interval Type 0~100 SoftSynchroniz Enumeration ed Network Type OFF(OFF), ON(ON) 0~100 None GBFD118201 OFF, ON None GBFD118201 SoftSynchroniz Compound ed Network Type hour, min hour{0~23} min{0~59} None GBFD119901 GBFD510301 GBFD510302 Streaming QoS(GBR) Public Voice Group Call Service Public Enumeration NO(Not Support), Type YES(Support) NO, YES None Enumeration Type OFF(Off), ON(On) OFF, ON None None GBFD510301 GBFD510302 None Public Voice Group Call Service Public Enumeration Type DEG(DEG), SEC(SEC) DEG, SEC None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510307 Group Call EMLPP None None Enumeration Type NO(No), YES(Yes) NO, YES OFF(Disable the golbal route management), Enumeration ON(Enable the golbal Type route management) OFF, ON None None GBFD114101 GPRS GBFD114101 GPRS GBFD114101 GPRS GBFD114101 GPRS GBFD114201 EGPRS Interval Type 4~32 support), NO(Not SupportAsInnPcu(Sup port as built-in PCU), Enumeration SupportAsExtPcu(Sup Type port as external Pcu) NO(Not Support), SupportAsInnPcu(Sup port As Inner Pcu), Enumeration SupportAsExtPcu(Sup Type port As Outer Pcu) 0dB(0dB), 2dB(2dB), 4dB(4dB), 6dB(6dB), 8dB(8dB), Enumeration 10dB(10dB), Type 12dB(12dB), GPRS(GPRS Channel), EGPRSNORCH(EGPR Enumeration S Normal Channel), Type EGPRSPRICH(EGPR 0.5~4, step: 1/8 bit NO, SupportAsInnPcu, SupportAsExtPcu None NO, SupportAsInnPcu, SupportAsExtPcu None 0dB, 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB GPRS, EGPRSNORCH, EGPRSPRICH, EGPRSSPECH, NONGPRS dB None GBFD114101 GPRS GBFD114101 GBFD116201 GBFD114101 GBFD510401 GPRS NetworkControlled Cell Reselection (NC2) Interval Type 0~7 0db(0db), 10db(10db), 20db(20db), 30db(30db), Enumeration 40db(40db), GPRS Type 50db(50db), GPS(GPS), BTS GPS GLONASS(Glonass), Synchroniz Enumeration GPSGlonass(GPSGlon ation Type ass) DB110(-110dB), DB108(-108dB), DB106(-106dB), Enumeration DB104(-104dB), Type DB102(-102dB), 10sec(10sec), 20sec(20sec), 30sec(30sec), Enumeration 40sec(40sec), Type 50sec(50sec), DB110, DB108, DB106, DB104, DB102, DB100, DB98, DB96, DB94, DB92, DB90, DB88, DB86, DB84, DB82, DB80, DB78, DB76, dB 10sec, 20sec, 30sec, 40sec, 50sec, 60sec, 70sec, 80sec, 90sec, 100sec, 110sec, 120sec, 130sec, 140sec, 150sec, s 0~7 0db, 10db, 20db, 30db, 40db, 50db, 60db, infinity, no use None dB GPS, GLONASS, GPSGlonass None None None Interval Type 1~60 1~60 min GBFD116001 Resource Enumeration Reservation Type NO(No), YES(Yes) Group Call Reliability Enhancing Group Call Reliability Enhancing NO, YES None GBFD510309 Interval Type 0~100000000 0~100000000 None GBFD510309 Interval Type 0~100000000 0~100000000 None GBFD113725 BSC Node Redundanc y Interval Type 0~65534 BSC Node Redundanc y String Type 0~65534 None GBFD113725 None 1~20 characters None GBFD117301 Flex Abis Interval Type 0~512 0~512 None GBFD118605 IP QOS Interval Type 0~2047 0~2047 None GBFD118605 IP QOS Simplified Cell Broadcast Enumeration Type IP(IP) IP None GBFD113602 LAC_CI(CELL IMME), Enumeration PLMN(ALL), Type LAC(LAC), CI(CELL) LAC_CI, PLMN, LAC, CI None GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 1~15 1~15 None GBFD114401 GBFD114302 Multi-band Sharing One BSC Interval Type GSM/TDSCDMA Interoperabi Enumeration lity Type 0~3 0~3 None None None UNSUPPORT(Not Support), SUPPORT(Support) ECHOREPLY, UNREACH, SOURCEQUENCH, REDIRECT, ECHO, Bit Field Type ROUTERADVERT, UNSUPPORT, UNREACH, None ECHOREPLY, SUPPORT SOURCEQUENCH, REDIRECT, ECHO, ROUTERADVERT, ROUTERSOLICIT, None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None GBFD113401 Half Rate Speech Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~600 0~600 s GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES dB GBFD118602 A over IP Interval Type 1000~600000 1000~600000 None GBFD111202 O&M of BTS Interval Type 0~62 0~62 None GBFD510501 HUAWEI II Handover Interval Type 1~16 0.5~8, step:0.5 s GBFD510501 HUAWEI II Handover Interval Type 1~16 0.5~8, step:0.5 s GBFD111202 O&M of BTS Interval Type 0~65535 0~65535 None GBFD111202 O&M of BTS Interval Type 0~65535 0~65535 None GBFD110101 GBFD115001 GBFD115001 GBFD115001 Frequency Band Enhanced Multi Level Precedence and Preemption Enhanced Multi Level Precedence and Preemption Enhanced Multi Level Precedence and Preemption Enumeration Type DCS1800, PCS1900 DCS1800, PCS1900 None Interval Type 1~14 1~14 None Enumeration Type NO(No), YES(Yes) YES, NO None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 GBFD111005 O&M of BTS Enhanced Channel Assignment Algorithm Enumeration Type NO(NO), YES(YES) NO, YES None Enumeration Type NO(No), YES(Yes) UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) SysOpt(System optimization), OSubcell(Overlaid Enumeration subcell), Type USubcell(Underlaid NO, YES None GBFD119404 HMC DTM UNSUPPORT, SUPPORT None GBFD113201 Concentric Cell SysOpt, OSubcell, USubcell, NoPrefer None GBFD118701 GBFD110601 GBFD510501 GBFD110601 GBFD510501 RAN Sharing HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~63 0~63 dB Interval Type 0~63 0~63 dB GBFD111203 O&M of BSC BYCELLNAME(By cell Enumeration name), BYCGI(By Type CGI) BYCELLNAME, BYCGI None GBFD111203 MRFD210301 O&M of BSC String Type Configuratio n Manageme Enumeration nt Type None 1~64 characters HOALGORITHM1(Han dover algorithm I), HOALGORITHM2(Han HOALGORITHM1, dover algorithm II) HOALGORITHM2 None None GBFD510103 Chain Cell Handover Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510103 Chain Cell Handover Interval Type 0~16 0~16 None GBFD510103 Chain Cell Handover Interval Type 0~16 0~16 None GBFD510102 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD114301 GBFD114302 Fast Move Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover GSM/WCD MA Interoperabi lity GSM/TD- Interval Type 0~63 0~63 dB Interval Type 1~32 0.5~16, step:0.5 s Interval Type 1~32 0.5~16, step:0.5 s Interval Type 0~49 0~49 dB GBFD510102 Fast Move Handover GBFD111203 GBFD110601 GBFD510501 O&M of BSC HUAWEI I Handover HUAWEI II Handover Interval Type 0~127 Interval Type 1~32 FREE(Free), INCELL(Intra-cell), OUTCELL(Outgoing Enumeration cell), OUTST(Outgoing Type site), 0.5~16, step:0.5 FREE, INCELL, OUTCELL, OUTST, OUTBSC, OUTSYS, SPCELL s None 0~127 dB GBFD113201 GBFD110601 GBFD510501 Concentric Cell Interval Type HUAWEI I Handover HUAWEI II Enumeration Handover Type Enhanced Dual-Band Network Frequency Hopping (RF hopping, baseband IBCA (Interferenc e Based Channel Allocation) Frequency Hopping (RF hopping, baseband HUAWEI I Handover HUAWEI II Handover Frequency Hopping (RF hopping, baseband Antenna Frequency Hopping Antenna Frequency Hopping Frequency Hopping (RF hopping, baseband HUAWEI I Handover HUAWEI II Handover 0~61 Pre_2G_Cell(Preferen ce for 2G cell), Pre_3G_Cell(Preferen ce for 3G cell), Pre_2G_CellThres(Pre 0~61 Pre_2G_Cell, Pre_3G_Cell, Pre_2G_CellThres dB None GBFD114402 Interval Type 0~255 0~255 s GBFD113701 Interval Type 0~63 0~63 None GBFD117002 Interval Type 0~63 0~63 None GBFD113701 GBFD110601 GBFD510501 BaseBand_FH(BaseBa Enumeration nd FH), RF_FH(RF Type FH) BaseBand_FH, RF_FH None Interval Type 0~63 0~63 dB GBFD113701 Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD113703 Interval Type 0~63 0~63 None GBFD113703 GBFD113701 GBFD110601 GBFD510501 Interval Type 0~23 NO_FH(No Frequency 0~23 Hopping), BaseBand_FH(Baseba Enumeration nd Frequency NO_FH, BaseBand_FH, Type Hopping), RF_FH(RF RF_FH None None Interval Type 0~63 0~63 dB GBFD118201 GBFD114301 GBFD114302 SoftSynchroniz ed Network Interval Type 1~60 GSM/WCD MA Interoperabi lity GSM/TDInterval Type 0~63 A Interface Protocol Process HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover 1~60 min 0~63 dB GBFD111804 GBFD110601 GBFD510501 GBFD110601 GBFD510501 Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 1~32 0.5~16, step:0.5 s Interval Type 1~32 0.5~16, step:0.5 s GBFD510102 Fast Move Handover GBFD113725 GBFD113725 GBFD110601 GBFD510501 Interval Type 1~32 SINGLEHOST(SINGL EHOST), BSC Node PRIMHOST(PRIMHOS Redundanc Enumeration T), y Type SLAVEHOST(SLAVEH SINGLEHOST(Single Host), BSC Node PRIMHOST(Primary Redundanc Enumeration Host), y Type SLAVEHOST(Slave HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 0.5~16, step:0.5 s SINGLEHOST, PRIMHOST, SLAVEHOST None SINGLEHOST, PRIMHOST, SLAVEHOST None 0~63 dB GBFD510102 Fast Move Handover Antenna Frequency Hopping Antenna Frequency Hopping Interval Type 0~63 NO_HPANT(No), Enumeration YES_HPANT(Yes), Type NONE(None) 0~63 dB GBFD113703 NO_HPANT, YES_HPANT, NONE None GBFD113703 Enumeration NO_HPANT(No), Type YES_HPANT(Yes) NO_HPANT, YES_HPANT None GBFD111202 O&M of BTS Interval Type 0~5 0~5 None GBFD116001 Resource Reservation Interval Type 1~14 1~14 None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Interval Type 350~556 35.0~55.6 (step: 0.1) V GBFD113401 GBFD114801 GBFD113401 Half Rate Speech Discontinuo us Transmissio n (DTX) Downlink Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD113201 GBFD114803 GBFD113401 GBFD113701 Concentric Cell Discontinuo us Transmissio n (DTX) Uplink Frequency Hopping (RF hopping, baseband Enumeration Type NO(No), YES(Yes) NO, YES May_Use(May Use), Shall_Use(Shall Use), Enumeration Shall_NOT_Use(Shall May_Use, Shall_Use, Type not Use) Shall_NOT_Use None None Interval Type 0~63 0~63 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD117001 Flex MAIO Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD111202 O&M of BTS Interval Type 0~254 0~254 None GBFD118609 IP Fault Detection Based on BFD Enumeration SBFD(SINGLE_HOP), Type MBFD(MULTI_HOP) SBFD, MBFD None MRFD210304 Faulty Manageme nt Interval Type -99~70 Faulty Manageme nt Interval Type 0~30 Faulty Manageme Enumeration DISABLE(DISABLE), nt Type ENABLE(ENABLE) Faulty Manageme Enumeration CLOSE(Close), nt Type OPEN(Open) Faulty Manageme nt String Type Faulty Manageme nt String Type -99~70 degree Celsius MRFD210304 0~30 degree Celsius MRFD210304 DISABLE, ENABLE None MRFD210304 CLOSE, OPEN None MRFD210304 None 1~9 characters per cent MRFD210304 None 1~9 characters per cent MRFD210304 Faulty Manageme nt Interval Type 0~1000 Faulty Manageme nt Interval Type 0~1000 Faulty Manageme nt Interval Type 0~1000 Faulty Manageme nt Interval Type 0~1000 0.0~100.0 (step: 0.1) None MRFD210304 0.0~100.0 (step: 0.1) None MRFD210304 0.0~100.0 (step: 0.1) None MRFD210304 0.0~100.0 (step: 0.1) None GBFD111202 O&M of BTS Interval Type 1~30 1~30 min GBFD111804 A Interface Protocol Process Interval Type 180~1260 180~1260 s GBFD111207 BTS Test Function GBFD111202 O&M of BTS GBFD111202 O&M of BTS A Interface Protocol Process IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) Interval Type 1~60 E1PORT0(E1 PORT0), E1PORT1(E1 Enumeration PORT1), Type E1PORT2(E1 MAINDOMU(MAIN DOMU), SLAVEDOMU1(SLAV Enumeration E DOMU1), Type SLAVEDOMU2(SLAV 1~60 E1PORT0, E1PORT1, E1PORT2, E1PORT3, OPTICALPORT0, OPTICALPORT1 MAINDOMU, SLAVEDOMU1, SLAVEDOMU2 min None None GBFD111804 Interval Type 60~600 60~600 s GBFD117002 Interval Type 0~23 0~23 dB GBFD117002 Interval Type 0~23 0~23 dB GBFD117002 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD117002 Interval Type 0~20 0~10, Step: 0.5 s GBFD117002 Interval Type 1~4 TCH:480~1920, step:480; SDCCH:470~1880, step:470 ms GBFD117002 Interval Type 0~14 0~14 dB GBFD117002 Interval Type 0~14 0~14 dB GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) Interval Type 0~63 0~63 dB Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~20 0~10, Step: 0.5 s Enumeration OFF(Not Allowed), Type ON(Allowed) OFF, ON None Enumeration OFF(Not Allowed), Type ON(Allowed) OFF, ON None Interval Type 0~23 0~23 dB Interval Type 0~20 0~10, Step: 0.5 s Interval Type 0~23 0~23 dB Interval Type 0~31 0~31 dB Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 2~600 2~600 s Interval Type 0~63 0~63 dB GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) Interval Type 0~63 0~63 dB Interval Type 0~22 0~22 dB Interval Type 0~22 0~22 dB Interval Type 0~63 0(Max. optimized MAIO), Enumeration 1(Randomization Type MAIO) 0~63 dB 0, 1 None Interval Type 5~40 5~40 None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~63 0~63 dB Interval Type 0~30 0~30 dB Interval Type 0~20 0~10, Step: 0.5 s Interval Type 0~16 0~16 None Interval Type 0~63 0~63 None GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) Interval Type 2~600 2~600 s Interval Type 0~50 0~50 dB Interval Type 0~10 0~10 None Interval Type 0~63 0~63 dB Interval Type 0~160 0~160 dB Interval Type 0~23 0~23 dB Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration OFF(Not Allowed), Type ON(Allowed) OFF, ON None Interval Type 0~63 None NO(Disabled in OL and 0~63 UL subcell), UNDER(Enabled in UL Enumeration subcell), INNER( Type Enabled in OL subcell), NO, UNDER, INNER, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~23 0~23 dB GBFD111604 Intelligent Combiner Bypass Enumeration NO(NO), YES(YES), Type NULL(NULL) NO, YES, NULL None GBFD111202 O&M of BTS Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None GBFD118605 IP QOS Interval Type 44~1024 44~1024 byte GBFD118603 Gb over IP Interval Type 0~63 0~63 None GBFD118603 Gb over IP Interval Type 0~63 0~63 None GBFD118603 Gb over IP Interval Type 0~63 0~63 None GBFD111203 O&M of BSC Interval Type 1~30 1~30 None GBFD111203 O&M of BSC Interval Type 1~30,100~32767 1~30, 100~32767 None GBFD111202 O&M of BTS Interval Type 0~65535 0~65535 None GBFD118602 A over IP Interval Type 0~255 0~255 None None None Interval Type 0~255 0~255 None GBFD113001 SDCCH Dynamic Adjustment Interval Type 0~63 0~63 None GBFD111202 O&M of BTS Enumeration BYIDX(By Index), Type BYNAME(By Name) BYIDX, BYNAME None GBFD111202 MRFD210301 MRFD210301 O&M of BTS Configuratio n Manageme nt Configuratio n Manageme nt Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME(By name), Enumeration BYID(By index), Type BYCGI(By CGI) BYNAME, BYID None BYNAME, BYID, BYCGI None MRFD211402 MRFD210301 MBSC Load Balancing Configuratio n Manageme nt Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None GBFD111202 O&M of BTS Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None GBFD111202 O&M of BTS Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None GBFD114701 MRFD210301 SemiPermanent Connection Interval Type 0~255 Configuratio n Manageme Enumeration BYTLLI(By TLLI), nt Type BYIMSI(By IMSI) 0~255 None BYTLLI, BYIMSI None GBFD111203 GBFD113601 O&M of BSC Short Message Service Cell Broadcast (TS23) Enumeration BYCELL(By Cell), Type BYBSC(By BSC) BYCELL, BYBSC None Enumeration Type YES(Yes), NO(No) YES, NO None GBFD111202 O&M of BTS Interval Type 0~15 0~3071 None GBFD111202 O&M of BTS Enumeration Positive(Positive), Type Minus(Minus) Positive, Minus None GBFD111202 O&M of BTS Interval Type 0~125 0~125 None GBFD111202 O&M of BTS Enumeration NO(Not Report), Type YES(Need Report) NO, YES None GBFD510102 Fast Move Handover Interval Type 0~32 0~32 None GBFD111203 O&M of BSC A Interface Protocol Process Assignment and Immediate Assignment Packet Assignment Taken Over by the BTS Assignment and Immediate Assignment Assignment and Immediate Assignment Assignment and Immediate Assignment String Type None 1~15 characters None GBFD111804 Interval Type 1000~30000 1000~30000 ms GBFD110502 Enumeration Type NO(NO), YES(YES) NO, YES None GBFD119202 Enumeration NO(Not Support), Type YES(Support) NO, YES None GBFD110502 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD110502 Interval Type 0~254 0~254 ms GBFD110502 Interval Type 1~5 1~5 None GBFD110502 Assignment and Immediate Enumeration Assignment Type NO(No), YES(Yes) NO, YES None GBFD113201 Concentric Cell Enumeration Type NO(No), YES(Yes) NO, YES None GBFD113201 Concentric Cell Interval Type 0~255 0~255 bit GBFD118201 GBFD110502 SoftSynchroniz Enumeration ed Network Type NO(NO), YES(YES) Assignment and Immediate Assignment Interval Type 0~255 NO, YES None 0~255 s GBFD111203 O&M of BSC String Type None 1~15 characters None GBFD114101 GBFD110601 GBFD510501 GPRS String Type None HUAWEI I Handover HUAWEI II Handover Interval Type 500~60000 SoftSynchroniz ed Network Interval Type 0~8 SoftSynchroniz ed Network Interval Type 1~30 BSS-Based LCS (Cell ID + TA) Interval Type 0~360 1~15 characters None 500~60000 ms GBFD118201 0~8 bit GBFD118201 1~30 d GBFD115402 0~360 degree GBFD111202 O&M of BTS Interval Type 0~62 0~62 None GBFD111202 GBFD115504 GBFD115504 O&M of BTS AMR FR/HR Dynamic Adjustment AMR FR/HR Dynamic Adjustment Enumeration Type NO(NO), YES(YES) NO, YES None Interval Type 1~32 0.5~16, step:0.5 s Interval Type 1~32 0.5~16, step:0.5 s MRFD211402 MBSC Load CELLCAPCLASS, Balancing Bit Field Type NACCRELATED Faulty Manageme nt AMR FR/HR Dynamic Adjustment AMR FR/HR Dynamic Adjustment Enhanced Channel Assignment Algorithm CELLCAPCLASS, NACCRELATED None MRFD210304 Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD115504 Interval Type 0~39 0~39 None GBFD115504 Interval Type 0~39 0~39 None GBFD111005 Interval Type 0~50 0~50 W GBFD115501 AMR FR Interval Type 0~3 0~3 None GBFD115502 AMR HR Interval Type 0~3 0~3 None GBFD115507 WB AMR GBFD114701 Interval Type 0~2 TS1, TS2, TS3, TS0, TS4, TS5, TS6, TS7, SemiTS8, TS9, TS10, Permanent TS11, TS12, TS13, Connection Bit Field Type TS14, TS15, TS16, 0~2 TS1, TS2, TS3, TS4, None TS0, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD114402 Enhanced Dual-Band Network Enhanced Dual-Band Network Configuratio n Manageme nt Configuratio n Manageme nt Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114402 Enumeration Type NO(No), YES(Yes) NO, YES None MRFD210301 Interval Type 0~2047 0~2047 None MRFD210301 String Type None 1~64 characters None GBFD114402 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114402 Interval Type 1~255 1~255 s GBFD114402 Interval Type 0~63 0~63 dB GBFD114402 Interval Type 0~100 0~100 per cent GBFD114701 SemiPermanent Connection Interval Type 0~335 0~335 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111203 O&M of BSC Interval Type 0~15 0~15 None GBFD115402 BSS-Based Degree(Degree), LCS (Cell Enumeration D_min_sec(Degree ID + TA) Type Minute Second) Degree, D_min_sec None GBFD110608 SDCCH Handover Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114701 SemiPermanent Connection Interval Type 0~27 0~27 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD114701 SemiPermanent Connection Interval Type 0~11 0~11 None GBFD111202 O&M of BTS Interval Type 0~254 0~254 None GBFD113602 GBFD110601 GBFD510501 Simplified Cell Broadcast Interval Type 2~3600 HUAWEI I Handover HUAWEI II Handover Interval Type 0~127 Cell Frequency Scan HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover 2~3600 s 0~127 dB GBFD112401 GBFD110601 GBFD510501 GBFD110601 GBFD510501 Enumeration INTBANI(INTBANI), Type INTBANII(INTBANII) INTBANI, INTBANII None Interval Type 0~63 0~63 dB Interval Type 0~255 0~255 s GBFD510501 HUAWEI II Handover Interval Type 1~16 0.5~8, step:0.5 s GBFD510501 HUAWEI II Handover Interval Type 1~16 0.5~8, step:0.5 s GBFD110601 GBFD510501 GBFD111005 GBFD111005 GBFD111005 GBFD111005 GBFD111005 GBFD111005 GBFD111005 HUAWEI I Handover HUAWEI II Handover Enhanced Channel Assignment Algorithm Enhanced Channel Assignment Algorithm Enhanced Channel Assignment Algorithm Enhanced Channel Assignment Algorithm Enhanced Channel Assignment Algorithm Enhanced Channel Assignment Algorithm Enhanced Channel Assignment Algorithm SoftSynchroniz ed Network Enhanced Channel Assignment Algorithm GSM/WCD MA Interoperabi lity GSM/TD- Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 48~115 48~115 None Interval Type 48~115 48~115 None Interval Type 48~115 48~115 None Interval Type 48~115 48~115 None Interval Type 48~115 48~115 None Interval Type 48~115 48~115 None GBFD118201 Interval Type 0~60 0~60 d GBFD111005 GBFD114301 GBFD114302 Interval Type 1~31 480~14880, step: 480 ms Enumeration Type NO(No), YES(Yes) NO, YES None MRFD211402 MBSC Load Balancing Interval Type 1~100 1~100 None GBFD114301 GBFD114302 GSM/WCD MA Interoperabi lity Enumeration GSM/TDType NO(No), YES(Yes) NO, YES None MRFD211402 MBSC Load Balancing Interval Type 1~49 1~49 dB MRFD211402 MBSC Load Balancing Interval Type 0~49 0~49 dB MRFD211402 MBSC Load Balancing Interval Type 1~49 1~49 dB MRFD211402 MBSC Load Balancing Interval Type 1~91 1~91 dB MRFD211402 MBSC Load Balancing Interval Type 0~91 0~91 dB MRFD211402 GBFD114301 GBFD114302 MRFD211402 GBFD111203 MRFD210305 MBSC Load Balancing Interval Type 1~91 GSM/WCD MA Interoperabi lity Enumeration GSM/TDType NO(No), YES(Yes) Service-based(Servicebased), Loadbased(Load-based), MBSC Load Enumeration DynamicBalancing Type based(Dynamic O&M of BSC Security Manageme nt Interval Type 1~240 1~91 dB NO, YES None {0~4} None 1~240 h GBFD118630 GBFD110801 GBFD110802 Ethernet OAM Processing Interval Type 1~10 of Measureme nt Report PreInterval Type 0~31 1~10 s 0~31 None GBFD114402 Enhanced Dual-Band Network Interval Type 0~63 0~63 dB GBFD110601 GBFD110601 GBFD510501 GBFD115504 GBFD110601 GBFD510501 GBFD110601 GBFD510501 HUAWEI I Handover HUAWEI I Handover HUAWEI II Handover AMR FR/HR Dynamic Adjustment HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Interval Type 500~60000 500~60000 ms Interval Type 500~60000 500~60000 ms Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 500~60000 500~60000 ms MRFD211402 MBSC Load Enumeration Balancing Type NO(No), YES(Yes) NO, YES None MRFD211402 MBSC Load Balancing Interval Type 0~49 0~49 dB MRFD211402 MBSC Load Balancing Interval Type 1~255 1~255 s MRFD211402 MBSC Load Balancing Interval Type 0~91 SemiPermanent Connection Interval Type 0~255 0~91 dB GBFD114701 0~255 None GBFD111203 O&M of BSC Interval Type 0~31 0~31 None GBFD111203 O&M of BSC Interval Type 1~1440 1~1440 min GBFD111203 GBFD117501 MRFD210301 O&M of BSC Enhanced Measureme nt Report(EM R) Configuratio n Manageme nt Interval Type 30~1024 30~1024 d Enumeration Type NO(No), YES(Yes) NO, YES None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD111203 O&M of BSC IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None GBFD111202 O&M of BTS IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118605 MRFD211502 MRFD211502 IP QOS IP-Based 2G/3G CoTransmissio n on MBSC Side IP-Based 2G/3G CoTransmissio n on MBSC Side IP Address Type None 0.0.0.0~255.255.255.255 None IP Address Type None 0.0.0.0~255.255.255.255 None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None MRFD210103 Link IP Address aggregation Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118606 Clock over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118606 Clock over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118630 Ethernet OAM Interval Type 0~100 0~100 per cent GBFD118630 Ethernet OAM Interval Type 0~100 0~100 per cent GBFD118611 GBFD118622 GBFD118611 GBFD118622 Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 No_HC(No_HC), UDP/IP_HC(UDP/IP_H C), Enumeration RTP/UDP/IP_HC(RTP/ Type UDP/IP_HC) No_HC(No_HC), UDP/IP_HC(UDP/IP_H C), Enumeration RTP/UDP/IP_HC(RTP/ Type UDP/IP_HC) No_HC, UDP/IP_HC, RTP/UDP/IP_HC None No_HC, UDP/IP_HC, RTP/UDP/IP_HC None None None Interval Type 0~5 0~5 None MRFD210103 GBFD118604 GBFD118610 Link aggregation Interval Type 0~5 Abis MUX UDP MUX for A Transmissio n Interval Type 0~12999 0~5 None 0~12999 None GBFD118601 GBFD118601 Enumeration IP_OVER_FE/GE, Abis over IP Type IP_OVER_E1 IP_OVER_FE/GE(IP_ OVER_FE/GE), Enumeration IP_OVER_E1(IP_OVE Abis over IP Type R_E1) IP_OVER_FE/GE, IP_OVER_E1 None IP_OVER_FE/GE, IP_OVER_E1 None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD118201 SoftSynchroniz Enumeration ed Network Type NO(NO), YES(YES) NO, YES None GBFD510103 Chain Cell Handover GBFD118606 Clock over IP GBFD118606 Clock over IP Enumeration Type NO(No), YES(Yes) UNSUPPORT(Not Support Reducy), Enumeration SUPPORT(Support Type Reducy) UNSUPPORT(Not Support Reducy), Enumeration SUPPORT(Support Type Reducy) NO, YES None UNSUPPORT, SUPPORT None UNSUPPORT, SUPPORT None GBFD117801 Ring Topology Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) YES, NO None GBFD114201 EGPRS Enumeration NO(Not support), Type YES(Support) NO, YES None GBFD118605 IP QOS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD114101 MRFD210301 Enumeration NO(Not support), GPRS Type YES(Support) Configuratio n Manageme Enumeration nt Type NO(No), YES(Yes) NO, YES None NO, YES None GBFD113726 TC Pool Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510104 GBFD116201 Multi-site Cell NetworkControlled Cell Reselection (NC2) Enumeration Type NO(NO), YES(YES) NO, YES None Enumeration NO(Not support), Type YES(Support) NO, YES None GBFD118603 GBFD118604 GBFD118610 Enumeration STATIC(Static), Gb over IP Type DYNAMIC(Dynamic) Abis MUX UDP MUX for A Transmissio Enumeration n Type NO(NO), YES(YES) SoftSynchroniz Enumeration ed Network Type NO(NO), YES(YES) STATIC, DYNAMIC None NO, YES None GBFD118201 NO, YES None GBFD111202 O&M of BTS Enumeration YES(Configure), Type NO(Not Configure) YES, NO None GBFD117803 Abis Transmissio Enumeration n Backup Type NO(NO), YES(YES) NO, YES None GBFD117702 BTS Local Switch Enumeration Type NO(No), YES(Yes) NO, YES None GBFD113726 MRFD210301 MRFD210301 TC Pool Configuratio n Manageme nt Configuratio n Manageme nt Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type YES(YES), NO(NO) YES, NO None Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS GBFD111202 MRFD210301 MRFD210301 MRFD210301 MRFD210301 O&M of BTS Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Enumeration Type NO(NO), YES(YES) NO, YES NOT_CONFIG(NOT CONFIGURED), Enumeration CONFIG(CONFIGURE Type D) NOT_CONFIG, CONFIG None None Interval Type 1~64 1~64 None Interval Type 1~30 1~30 None Enumeration TRUE(Support), Type FALSE(Not Support) TRUE, FALSE None Interval Type 0~65535 0~65535 None GBFD118605 IP QOS ABIS(Abis Interface), A(A Interface), ATER(ATER Enumeration Interface), Type IUR_G(IUR_G ABIS, A, ATER, IUR_G None GBFD118605 IP QOS GBFD113201 Concentric Cell GBFD113201 Concentric Cell Enumeration Type PPP(PPP), MP(MP) OVERLAID(Overlaid Subcell), UNDERLAID(Underlai Enumeration d Subcell), Type NONE(None) CONVERT0(Only convert at UL), CONVERT1(Only Enumeration convert at OL), Type CONVERT2(UL first PPP, MP None OVERLAID, UNDERLAID, NONE None CONVERT0, CONVERT1, CONVERT2, CONVERT3 None GBFD113201 Concentric Cell Interval Type 1~32 0.5~16, step:0.5 s GBFD113201 GBFD113201 GBFD114402 Concentric Cell Concentric Cell Enhanced Dual-Band Network Interval Type 1~32 0.5~16, step:0.5 s Normal_cell(Normal Cell), Concentric_cell(Conce Enumeration ntric Cell), Normal_cell, Type EDB_cell(Enhanced Concentric_cell, EDB_cell None None None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON Hexadecimal(Hex decimal), Enumeration Character_String(Char Hexadecimal, Type acter String) Character_String None None None None String Type None 0~124 characters None None None String Type None 0~124 characters None None None Enumeration NULL, 1byte, 16byte, Type 64byte NULL, 1byte, 16byte, 64byte None None None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON Hexadecimal(Hex decimal), Enumeration Character_String(Char Hexadecimal, Type acter String) Character_String None none None None String Type None 0~124 characters None None None String Type None 0~124 characters None None None Enumeration NULL, 1byte, 16byte, Type 64byte NULL, 1byte, 16byte, 64byte None None None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON Hexadecimal(Hex decimal), Enumeration Character_String(Char Hexadecimal, Type acter String) Character_String None None None None Enumeration NULL, 1BYTE, Type 16BYTE, 64BYTE NULL, 1BYTE, 16BYTE, 64BYTE None None None String Type None 0~64 characters None None None String Type None 0~64 characters None None GBFD118401 Enumeration None Type Abis Transmissio n Optimizatio Enumeration n Type ZERO(zero), SPACE(space) ZERO, SPACE None DISABLE(Disable), ENABLE(Enable) DISABLE, ENABLE None GBFD111612 MultiCarrier Intelligent Voltage Regulation Interval Type 1~255 1~255, (step: 20) ms GBFD118601 GBFD111701 GBFD110601 GBFD510501 GBFD118611 GBFD118622 MRFD210301 GBFD510702 Enumeration DENY(Deny), Abis over IP Type ALLOW(Allow) NOT-INDICATEEND(NOT-INDICATEBoard Enumeration END), INDICATESwitchover Type END(INDICATE-END) HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 Abis IP over E1/T1 A IP over E1/T1 Interval Type 1~30 Configuratio n Manageme nt Interval Type 1~65533,65535 Compact BTS Automatic Capacity Planning Interval Type 1~65533,65535 DENY, ALLOW None NOT-INDICATE-END, INDICATE-END None 0~63 dB 1~30 s 1~65533, 65535 None 1~65533, 65535 None MRFD210103 STATIC_LACP, STATIC_LACP, Link Enumeration MANUAL_AGGREGA MANUAL_AGGREGATIO aggregation Type TION N None BSS-Based LCS (Cell ID + TA) String Type GBFD115402 None 1~5 characters degree GBFD115402 BSS-Based LCS (Cell ID + TA) Interval Type 0~90 BSS-Based LCS (Cell ID + TA) Interval Type 0~90 BSS-Based LCS (Cell ID + TA) Interval Type 0~59 0~90 degree GBFD115402 0~90 degree GBFD115402 0~59 minute GBFD115402 BSS-Based LCS (Cell ID + TA) Interval Type 0~9 BSS-Based LCS (Cell ID + TA) Interval Type 0~59 0~9 second GBFD115402 0~59 second None None Interval Type -90000000~90000000 -90~90, step: 0.000001 degree None None String Type None 90:00:00.000~90:00:00.00 0 SEC GBFD118605 IP QOS Interval Type 1~100 100~10000, step:100 ms GBFD118605 IP QOS Interval Type 0~100 0~100 None GBFD118605 IP QOS Interval Type 0~10000 0~10000 ms GBFD118605 IP QOS Interval Type 0~15 0~15 None GBFD118605 GBFD110601 GBFD510501 GBFD110601 GBFD510501 IP QOS HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Interval Type 0~15 0~15 None Enumeration Type 1, 2, 3, 4 1, 2, 3, 4 None Enumeration Type 1, 2, 3, 4 1, 2, 3, 4 None None None Interval Type 0~300 0~300 s None None GBFD118601 GBFD118601 GBFD118601 Interval Type 0~300 CLOSE(Close), PSDOWN(PS Downspeeding), Enumeration AMRC(AMRC), Abis over IP Type CSPH(CS Preference CLOSE(Close), PSDOWN(PS Downspeeding), Enumeration AMRC(AMRC), Abis over IP Type CSPH(CS Preference CLOSE(Close), PSDOWN(PS Downspeeding), Enumeration AMRC(AMRC), Abis over IP Type CSPH(CS Preference 0~300 s CLOSE, PSDOWN, AMRC, CSPH, CSFHHO None CLOSE, PSDOWN, AMRC, CSPH, CSFHHO None CLOSE, PSDOWN, AMRC, CSPH, CSFHHO None GBFD118602 GBFD111203 MRFD210305 A over IP Interval Type O&M of BSC Security Manageme Enumeration nt Type 0~186 0~186 None GBFD111203 O&M of BSC CRITICAL(Critical), MAJOR(Major), MINOR(Minor) INFO(Information Level), WARN(Warn Level), ERR(Error Enumeration Level), AST(Assert Type Level) CRITICAL, MAJOR, MINOR None INFO, WARN, ERR, AST None None None Enumeration Type ON(ON), OFF(OFF) ON, OFF None GBFD118630 GBFD110801 GBFD110802 GBFD110601 GBFD510501 GBFD110601 GBFD510501 Ethernet OAM Processing of Measureme nt Report PreHUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Interval Type 0~7 NO(Not Support), Enumeration YES(Support), Type NONE(Invalid) 0~7 None NO, YES, NONE None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~63 0~63 dB GBFD110601 GBFD510501 GBFD110601 GBFD510501 MRFD210301 MRFD210301 GBFD118611 GBFD118622 MRFD210301 HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt Configuratio n Manageme nt Abis IP over E1/T1 A IP over E1/T1 Configuratio n Manageme nt Interval Type 1~32 0.5~16, step:0.5 s Interval Type 1~32 TDM_Switching, OAM, GCP, RGCP, MCP, GTC, GPCU, IP, FR, Enumeration HDLC, TDM, GbIP, Type Abis_TDM, Ater_TDM, TDM_Switching, GCP, RGCP, MCP, GTC, GPCU, IP, FR, HDLC, Enumeration TDM, GbIP, Type Abis_TDM, Ater_TDM, 0.5~16, step:0.5 OAM, TDM_Switching, GCP, RGCP, MCP, GTC, GPCU, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, TDM_Switching, GCP, RGCP, MCP, GTC, GPCU, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, s None None Enumeration Type IP, Abis_IP IP, Abis_IP None Enumeration Type A/Gb, Abis/Ater/Pb/Gb A/Gb, Abis/Ater/Pb/Gb None GBFD111203 O&M of BSC Interval Type 5120~5375 5120~5375 None GBFD111202 O&M of BTS Interval Type 0~99 0~99 None MRFD210304 Faulty Manageme nt Interval Type 90~99 Faulty Manageme nt Interval Type 70~95 90~99 per cent MRFD210304 70~95 per cent GBFD111203 O&M of BSC Interval Type 0~17407 0~17407 None None None Enumeration Type DIFFERENCE, ALL DIFFERENCE, ALL None GBFD111804 A Interface Protocol Enumeration 64K(64Kbit/s), Process Type 2M(2Mbit/s) Faulty Manageme nt String Type Configuratio n Manageme nt String Type 64K, 2M bit/s MRFD210304 None 0~9 characters None MRFD210301 None None None TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), Enumeration TS4(Time_slot_4), Type TS5(Time_slot_5), 1~8 characters TS4, TS5, None TS1, TS2, TS3, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD111202 O&M of BTS Interval Type 0~40 0~40 V GBFD111202 O&M of BTS Interval Type 40~80 40~80 LUCENT_MODE, HUAWEI_MODE, ALCATEL_MODE V None GBFD114701 GBFD118602 GBFD111804 GBFD118602 GBFD110601 GBFD510501 LUCENT_MODE, Enumeration HUAWEI_MODE, None Type ALCATEL_MODE 8K(8Kbit/s), 16K(16Kbit/s), Semi32K(32Kbit/s), Permanent Enumeration 64K(64Kbit/s), Connection Type 2M(2Mbit/s) M3UA_MASTER_MO D(M3UA_MASTER_M OD), Enumeration M3UA_SLAVE_MOD( A over IP Type M3UA_SLAVE_MOD) B0000(B0000), B0001(B0001), A Interface B0010(B0010), Protocol Enumeration B0011(B0011), Process Type B0100(B0100), B0000(B0000), B0001(B0001), B0010(B0010), Enumeration B0011(B0011), A over IP Type B0100(B0100), HUAWEI I Handover HUAWEI II Handover Interval Type 0~100 None 8K, 16K, 32K, 64K, 2M None M3UA_MASTER_MOD, M3UA_SLAVE_MOD B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, None None None 0~100 per cent GBFD117401 GBFD116201 MSC Pool NetworkControlled Cell Reselection (NC2) Interval Type 1~10 RANDOMALG(Rando m Algorithm), Enumeration OTHERALG(MS ID RANDOMALG, Type Algorithm) OTHERALG None 1~10 s GBFD111202 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 O&M of BTS HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Interval Type 0~1000 0~1000 None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~255 0~255 s Interval Type 0~63 0~63 dB Interval Type 1~255 1~255 s Interval Type 1~63 1~63 dB Interval Type 0~63 0~63 dB GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD116201 GBFD116201 GBFD116201 GBFD116201 GBFD111005 NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) Enhanced Channel Assignment Algorithm Enumeration FORBID(Forbid), Type PERMIT(Permit) FORBID, PERMIT None Interval Type 0~63 0~63 None Interval Type 0~100 0~100 per cent Interval Type 0~100 0~100 per cent Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS BSC Node Redundanc y Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD113725 GBFD118611 GBFD118622 GBFD118611 GBFD118622 Interval Type 0~65534 0~65534 None IP Address Type None 0.0.0.0~255.255.255.255 None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118611 Abis IP over IP Address E1/T1 Type None 0.0.0.0~255.255.255.255 None GBFD118611 Abis IP over IP Address E1/T1 Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP Interval Type 0~1023 0~1023 None GBFD118603 Gb over IP Interval Type 0~1 0~1 None GBFD510104 Multi-site Cell Interval Type 0~35 0~35 None GBFD510104 Multi-site Cell Interval Type 0~35 0~35 None MRFD210304 Faulty Manageme nt String Type None 1~200 characters None GBFD118602 A over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118602 GBFD111203 MRFD210305 IP Address A over IP Type None O&M of BSC Security Manageme Enumeration OFF(Unlock), nt Type ON(Lock) 0.0.0.0~255.255.255.255 None OFF, ON None GBFD118602 MRFD210301 A over IP Interval Type Configuratio n Manageme Enumeration nt Type 1024~65535 1024~65535 None GBFD111202 O&M of BTS LFB(Load from OMU and write flash), CL(Consult Load) NORMMODE(Normal Mode), RAPMODENOSERV(R Enumeration apid Mode<No Type service>), LFB, CL NORMMODE, RAPMODENOSERV, RAPMODERESSERV None None WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent None None Enumeration Type NO(NO), YES(YES) NO, YES None None None Interval Type 0~988 0~988 None None None Interval Type 0~5,8~27 0~5, 8~27 None WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control GBFD111203 O&M of BSC GBFD111202 O&M of BTS Enumeration Type ON, OFF PFM_RESULT, HOST_PFM_RESULT, ACTIVE_DEF_MEAS_ FILE, Bit Field Type STANDBY_DEF_MEA COMLOG(Common Log), Enumeration CMPLOG(Compress Type Log) ON, OFF None PFM_RESULT, HOST_PFM_RESULT, ACTIVE_DEF_MEAS_FIL E, STANDBY_DEF_MEAS_F None COMLOG, CMPLOG None GBFD115402 BSS-Based LCS (Cell ID + TA) String Type None 1~5 characters degree GBFD115402 BSS-Based LCS (Cell ID + TA) Interval Type 0~180 BSS-Based LCS (Cell ID + TA) Interval Type 0~180 BSS-Based LCS (Cell ID + TA) Interval Type 0~59 0~180 degree GBFD115402 0~180 degree GBFD115402 0~59 minute GBFD115402 BSS-Based LCS (Cell ID + TA) Interval Type 0~9 BSS-Based LCS (Cell ID + TA) Interval Type 0~59 0~9 second GBFD115402 0~59 second None None 180000000~18000000 Interval Type 0 -180~180, step: 0.000001 degree None MRFD210301 None String Type None Configuratio n Manageme nt Interval Type 1~3 180:00:00.000~180:00:00. 000 SEC 1~3 None None None BYLOCAL(By Local Enumeration Loop), BYREMOTE(By Type Remote Loop) BYLOCAL, BYREMOTE None None None GBFD111203 GBFD117002 O&M of BSC IBCA (Interferenc e Based Channel Allocation) Interval Type 0~100 Enumeration Type OFF(OFF), ON(ON) LOOPTYPE_TDM(Line Loop), LOOP_TYPE_LVDS(L Enumeration VDS Loop), Type LOOPTYPE_MCC(MC OFF, ON LOOPTYPE_TDM, LOOP_TYPE_LVDS, LOOPTYPE_MCC None None 0~100 per cent GBFD111203 O&M of BSC GBFD111203 O&M of BSC None None Enumeration MSC(MSC Direction), Type MS(MS Direction) NSSAINTF(NSS Interface Unit), NSSTCTOABIS(NSS Enumeration TC(Near Abis Type Interface)), NO_LOOP(No loop), REMOTE_LOOP(Rem ote loop), Enumeration LINE_REM_LOOP(Lin Type e remote loop), MSC, MS NSSAINTF, NSSTCTOABIS, NSSTCTOA, NSSTNUTOABIS, NSSTNUTOA, NO_LOOP, REMOTE_LOOP, LINE_REMOTE_LOOP, LOCAL_LOOP, PAYLOAD_LOOP, None None None None None NO_LOOP(NO_LOOP ), LOCAL_LOOP(LOCAL NO_LOOP, Enumeration _LOOP), REMOTE_LOOP, Type REMOTE_LOOP(REM LOCAL_LOOP None GBFD111203 O&M of BSC Interval Type 60~600 60~600 s GBFD118605 IP QOS Interval Type 1~100 1~100 None GBFD117301 Flex Abis Enumeration Type NO(No), YES(Yes) NO, YES None GBFD117301 Flex Abis Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD113201 Concentric Cell Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) E1(E1 Loopback), Enumeration TIMESLOT(Timeslot Type Loopback) NO, YES None GBFD111202 O&M of BTS E1, TIMESLOT None GBFD118605 IP QOS Interval Type 0~988 None None Interval Type 0~988,1024~1535 0~988 FG2a/GOUa board:0~119;FG2c board:0~489, 512~767;GOUc board:0~499, None None None None Interval Type 0~988,1024~1535 FG2a/GOUa/UOIa(IP) board:0~119;FG2c board:0~489, 512~767;GOUc board:0~499, None GBFD118605 IP QOS Interval Type 0~5,8~27 0~5, 8~27 None None None Enumeration Type Hub(Hub), Leaf(Leaf) Hub, Leaf None GBFD114201 EGPRS Enumeration Type IR(IR), LA(LA) IR, LA None GBFD111202 O&M of BTS Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None GBFD111202 O&M of BTS GBFD118601 GBFD111203 MRFD210305 MRFD210301 Abis over IP O&M of BSC Security Manageme nt Configuratio n Manageme nt None GBFD111203 MRFD210305 GBFD111203 MRFD210305 None of O&M BSC Security Manageme nt O&M of BSC Security Manageme nt Interval Type 350~556 CLOSE(Close), PSDOWN(PS Downspeeding), Enumeration AMRC(AMRC), Type CSPH(CS Preference EXCLUDE(Exclude List Command), Enumeration INCLUDE(Include List Type Command) HORIZONTAL(HORIZ ONTAL), Enumeration VERTICAL(VERTICAL Type ) APPLICATION(Applica tion Program), SCNDCPU_PROG(Se Enumeration condary Thread Type Program), OPTLOG(Operation Log), Enumeration SECLOG(Security Type Log) OPTLOG(Operation Log), Enumeration SECLOG(Security Type Log) 35.0~55.6 (step: 0.1) V CLOSE, PSDOWN, AMRC, CSPH, CSFHHO None EXCLUDE, INCLUDE None HORIZONTAL, VERTICAL None APPLICATION, SCNDCPU_PROG, BOOTROM, DATA, DSP, FAN None OPTLOG, SECLOG None OPTLOG, SECLOG None GBFD111202 O&M of BTS Interval Type -99~70 -99~70 degree Celsius GBFD111202 GBFD115506 GBFD115506 GBFD115506 GBFD115506 O&M of BTS AMR Coding Rate Threshold Adaptive AMR Coding Rate Threshold Adaptive AMR Coding Rate Threshold Adaptive AMR Coding Rate Threshold Adaptive Interval Type -99~99 -99~99 degree Celsius Interval Type 2~255 2~255 None Interval Type 2~255 2~255 None Interval Type 2~255 2~255 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Interval Type 2~255 15(1.5), 14(1.4), 16(1.6), 18(1.8), 20(2.0), 22(2.2), Enumeration 24(2.4), 26(2.6), Type 28(2.8), 30(3.0), 18(1.8), 20(2.0), 22(2.2), 24(2.4), 26(2.6), 28(2.8), Enumeration 30(3.0), 32(3.2), Type 35(3.5), 38(3.8), 2~255 None 14, 15, 16, 18, 20, 22, 24, 26, 28, 30, 33, 36, 88 None 18, 20, 22, 24, 26, 28, 30, 32, 35, 38, 41, 45, 88 None GBFD111202 O&M of BTS Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None GBFD118602 MRFD210301 A over IP Interval Type 1024~65535 Configuratio n Manageme nt Interval Type 0~8191 1024~65535 None 0~8191 None GBFD118630 Ethernet OAM Interval Type 0~100 0~100 per cent GBFD118630 GBFD113701 Ethernet OAM Frequency Hopping (RF hopping, baseband Interval Type 0~100 0~100 CA_MA(CA+MA), Frequency_List(Freque ncy List), Enumeration OPTIMIZED_CA_MA( CA_MA, Frequency_List, Type Optimized CA+MA) OPTIMIZED_CA_MA per cent None GBFD118630 GBFD111609 GBFD111609 GBFD111609 GBFD111609 GBFD111609 Ethernet OAM Enhanced BCCH Power Consumptio n Enhanced BCCH Power Consumptio n Enhanced BCCH Power Consumptio n Enhanced BCCH Power Consumptio n Enhanced BCCH Power Consumptio n Interval Type 0~499 0~499 None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Compound Type hour, min 00:00~23:59 None Interval Type 0~15 0~3, Step:0.2 dB Compound Type hour, min 00:00~23:59 None GBFD111202 O&M of BTS String Type None 1~64 characters None GBFD118601 Abis over IP String Type None 1~64 characters None GBFD510104 Multi-site Cell Interval Type 0~35 0~35 None MRFD210206 Tree Topology Interval Type 0~1 0~1 None GBFD111202 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 GBFD117002 O&M of BTS IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) IBCA (Interferenc e Based Channel Allocation) Interval Type 0~9999 0~9999 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None GBFD117002 IBCA (Interferenc e Based Channel Allocation) Interval Type 0~11 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 0~11 None MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA GBFD118630 GBFD118630 MRFD210301 GBFD118611 GBFD118622 GBFD118611 GBFD118622 Ethernet OAM Ethernet OAM Configuratio n Manageme Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 String Type None 1~20 characters None String Type None 1~20 characters None IP Address Type None 0.0.0.0~255.255.255.255 None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None GBFD113601 IP Address None Type Short Message Service Cell Broadcast IP Address (TS23) Type None 0.0.0.0~255.255.255.255 None None 0.0.0.0~255.255.255.255 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None GBFD118611 Abis IP over IP Address E1/T1 Type None 0.0.0.0~255.255.255.255 None GBFD118611 Abis IP over IP Address E1/T1 Type None 0.0.0.0~255.255.255.255 None GBFD118606 Clock over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118606 GBFD110703 Clock over IP Enhanced Power Control Algorithm IP Address Type None 0.0.0.0~255.255.255.255 None Interval Type 0~32 0~32 dB GBFD118602 A over IP Interval Type 0~254 0~254 None GBFD118605 GBFD110601 GBFD510501 IP QOS Interval Type 1~1562 HUAWEI I Handover HUAWEI II Handover Interval Type 1~20 64~100000, step:64 kbit/s 1~20 None GBFD114101 GPRS Interval Type 0~5 0~5 None GBFD114101 GBFD111605 GBFD510702 GBFD510702 GBFD118604 GBFD118610 GPRS Active Backup Power Control Compact BTS Automatic Capacity Planning Compact BTS Automatic Capacity Planning Abis MUX UDP MUX for A Transmissio n Interval Type 0~5 0~5 None Interval Type 0~20 0~20 dB Interval Type 1~2 1~2 None Interval Type 1~2 1~2 None Interval Type 24~1031 24~1031 byte GBFD111202 GBFD118611 GBFD118622 O&M of BTS Interval Type 50~200 Abis IP over E1/T1 A IP over E1/T1 Interval Type 1~1500 50~200 None 1~1500 byte None None Interval Type 1~1500 1~1500 None MRFD210305 Security Manageme nt Interval Type 1~255 Faulty Manageme nt Interval Type 10000~150000 1~255 None MRFD210304 10000~150000 None GBFD111202 O&M of BTS Interval Type 1~1000 100~100000 (step: 100) W GBFD118602 A over IP Interval Type 0~254 0~254 None GBFD114101 GPRS Interval Type 0~100 0~100 None GBFD113101 PDCH Dynamic Adjustment Interval Type 0~8 PDCH Dynamic Adjustment Interval Type 0~100 0~8 None GBFD113101 0~100 per cent GBFD114101 GPRS GBFD111202 O&M of BTS GBFD111202 GBFD110601 GBFD510501 GBFD119110 GBFD119110 GBFD119110 GBFD119110 O&M of BTS HUAWEI I Handover HUAWEI II Handover Interval Type 1~255 1_Times(1_Times), 2_Times(2_Times), Enumeration 4_Times(4_Times), Access Type 7_Times(7_Times) 1_Times(1_Times), 2_Times(2_Times), Enumeration 4_Times(4_Times), Access Type 7_Times(7_Times) 1_Times(1_Times), 2_Times(2_Times), Enumeration 4_Times(4_Times), Access Type 7_Times(7_Times) 1_Times(1_Times), 2_Times(2_Times), Enumeration 4_Times(4_Times), Access Type 7_Times(7_Times) Interval Type 0~5 1C(0.01C), 2C(0.02C), 3C(0.03C), 4C(0.04C), 5C(0.05C), 6C(0.06C), Enumeration 7C(0.07C), 8C(0.08C), Type 9C(0.09C), 7C(0.07C), 5C(0.05C), 10C(0.10C), 12C(0.12C), Enumeration 15C(0.15C), Type 18C(0.18C), 0~5 2C, 3C, 4C, 5C, 6C, None 1C, 7C, 8C, 9C, 10C, 11C, 12C, 13C, 14C, 15C, 16C, 17C, 18C, 19C, 20C, 21C, 22C, 23C, 24C, 25C, 26C, None 5C, 7C, 10C, 12C, 15C, 18C, 20C, 22C, 25C None 1~255 None 1_Times, 2_Times, 4_Times, 7_Times None 1_Times, 2_Times, 4_Times, 7_Times None 1_Times, 2_Times, 4_Times, 7_Times None 1_Times, 2_Times, 4_Times, 7_Times None GBFD118611 GBFD118622 Abis IP over E1/T1 A IP over E1/T1 Interval Type 1~746 1~746 byte None GBFD110703 GBFD110703 GBFD110703 GBFD110901 GBFD111004 GBFD111004 GBFD111004 None Enhanced Power Control Algorithm Enhanced Power Control Algorithm Enhanced Power Control Algorithm Adjustment of Adaptive Timing Advance Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Interval Type 1~746 1~746 None Interval Type 0~30 0~30 dB Interval Type 0~30 0~30 dB Interval Type 0~30 0~30 dB Interval Type 0~255 0~255 None Interval Type 0~31 0~31 None Enumeration Type OFF(Off), ON(On) OFF, ON None Interval Type 0~255 0~255 None None None Interval Type 1~24 1~24 h GBFD117301 Flex Abis Interval Type 0~32 0~32 None None None Interval Type 2~255 2~255 None GBFD110703 GBFD118609 GBFD118609 Enhanced Power Control Algorithm IP Fault Detection Based on BFD IP Fault Detection Based on BFD Interval Type 0~32 0~32 dB Interval Type 0~511 0~511 None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD114401 GBFD117501 GBFD117501 Multi-band Sharing One BSC Enhanced Interval Type 0~3 Measureme nt Report(EM R) Enhanced Interval Type 0~31 Measureme nt Report(EM R) Interval Type 0~31 SoftSynchroniz ed Network Interval Type 0~2047 SoftSynchroniz ed Network Configuratio n Manageme nt Compact BTS Automatic Capacity Planning Abis IP over E1/T1 A IP over E1/T1 0~3 TCH:0~14880, step:480; SDCCH:0~14570, step:470 TCH:0~14880, step:480; SDCCH:0~14570, step:470 None ms ms GBFD118201 0~2047 None GBFD118201 String Type None 1~64 characters None MRFD210301 String Type None 3 digit None GBFD510702 GBFD118611 GBFD118622 String Type None 1~3 characters None Interval Type 4,8 GBFD118611 Abis IP over E1/T1 Interval Type 4,8 4, 8 two bytes to present None 4(Use MC priority number, 4 classes), 8(Use four bytes to present MC priority number, 8 classes) None MRFD210301 Configuratio n Manageme nt Interval Type 0~2047 0~2047 None GBFD111202 O&M of BTS String Type None 1~64 characters None GBFD111202 GBFD111005 O&M of BTS Interval Type 0~62 Enhanced Channel Assignment Enumeration Algorithm Type OFF(Off), ON(On) CLASS0(Class0), Enumeration CLASS1(Class1), Type CLASS2(Class2) 0~62 None ON, OFF None GBFD111202 O&M of BTS CLASS0, CLASS1, CLASS2 None GBFD118630 GBFD118630 MRFD210301 Ethernet OAM Interval Type 0~7 Ethernet OAM Configuratio n Manageme Interval Type 0~7 0~7 None 0~7 None GBFD118630 GBFD118630 MRFD210301 Ethernet OAM String Type Ethernet OAM Configuratio n Manageme String Type None 1~20 characters None None 1~20 characters None GBFD119102 Packet System Enumeration Information Type NO(No), YES(Yes) NO, YES None MRFD211402 GBFD117501 MBSC Load Balancing Interval Type Enhanced Measureme nt Report(EM Enumeration R) Type 1~5 EnhMeasReport(Enha 1~5 nced Measurement Report), ComMeasReport(Com EnhMeasReport, mon Measurement ComMeasReport s None GBFD118630 GBFD118630 MRFD210301 Ethernet OAM Interval Type 1~1000 Ethernet OAM Configuratio n Manageme Interval Type 1~8191 1~1000 None 1~8191 None GBFD118630 GBFD118611 GBFD118622 Ethernet OAM Abis IP over E1/T1 A IP over E1/T1 LocalMep(LocalMep), Enumeration RemoteMep(RemoteM LocalMep, Type ep) RemoteMep None Enumeration LONG(LONG), Type SHORT(SHORT) LONG, SHORT None GBFD118611 GBFD116201 LONG(Long List Abis IP over Enumeration Head), SHORT(Short E1/T1 Type List Head) NetworkControlled Cell Reselection (NC2) Interval Type 0~63 LONG, SHORT None 0~63 None GBFD118605 GBFD114301 GBFD110601 GBFD510501 IP QOS Interval Type 1~1562 GSM/WCD MA Interoperabi lity Interval Type 0~49 HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 0~2000 64~100000, step:64 kbit/s 0~49 dB 0~63 dB MRFD210304 10~3500 mA MRFD210304 10~3500 mA MRFD210304 0~2000 mA MRFD210304 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 0~2000 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 0~2000 mA MRFD210304 10~3500 mA MRFD210304 10~3500 mA GBFD110607 Direct Retry Interval Type 0~63 SDCCH Dynamic Adjustment GSM/WCD MA Interoperabi lity GSM/TDIP Fault Detection Based on BFD IP Fault Detection Based on BFD 0~63 dB GBFD113001 GBFD114301 GBFD114302 Interval Type 60~3600 60~3600 s Interval Type 0~63 0~63 dB GBFD118609 Interval Type 10~1000 10~1000 ms GBFD118609 Interval Type 10~1000 10~1000 ms GBFD118609 GBFD118609 IP Fault Detection Based on BFD IP Fault Detection Based on BFD Interval Type 10~1000 10~1000 ms Interval Type 10~1000 10~1000 ms None None Interval Type 0~11 0~11 None None None Interval Type 0~11 UP(upstream mirror), Enumeration DOWN(downstream Type mirror) 0~11 None None MRFD210301 GBFD510702 None Configuratio n Manageme nt String Type Compact BTS Automatic Capacity Planning String Type UP, DOWN None None 2~3 digit None None 1~64 characters None GBFD111705 GSM Flow Control MRFD210502 BSC/RNC Clock GBFD118602 MRFD210301 MRFD210301 A over IP Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 50~95 50~95 MANUAL(Manual Handover), AUTO(Auto Enumeration Handover), FREE(FreeType run) MANUAL, AUTO, FREE SERVER(SERVER MOD), Enumeration CLIENT(CLIENT Type MOD) SERVER, CLIENT per cent None None Enumeration Type OFF(OFF), ON(ON) GO(GSM), Enumeration UO(UMTS), GU(GSM Type and UMTS) OFF, ON None GO, UO, GU None GBFD111701 GBFD118609 MODE1(1:1 Protection Switching), MODE2(1+1 Board Enumeration Unidirectional Switchover Type Protection Switching), CHECK_ON_INDEPE IP Fault NDENT_PORT, Detection CHECK_ON_PRIMAR Based on Enumeration Y_PORT, BFD Type CHECK_ON_STANDB Faulty MODE1(Mode1), Manageme Enumeration MODE2(Mode2), nt Type MODE3(Mode3) Faulty MODE1(Mode1), Manageme Enumeration MODE2(Mode2), nt Type MODE3(Mode3) Faulty MODE1(Mode1), Manageme Enumeration MODE2(Mode2), nt Type MODE3(Mode3) Faulty MODE1(Mode1), Manageme Enumeration MODE2(Mode2), nt Type MODE3(Mode3) Faulty MODE1(Mode1), Manageme Enumeration MODE2(Mode2), nt Type MODE3(Mode3) Faulty MODE1(Mode1), Manageme Enumeration MODE2(Mode2), nt Type MODE3(Mode3) 30MINS(30 Minutes), 60MINS(60 Minutes), 120MINS(120 O&M of Enumeration Minutes), BTS Type 240MINS(240 Minutes) MODE1, MODE2, MODE3 None CHECK_ON_INDEPENDE NT_PORT, CHECK_ON_PRIMARY_P ORT, CHECK_ON_STANDBY_P None MODE1, MODE2, MODE3 MODE1, MODE2, MODE3 MODE1, MODE2, MODE3 MODE1, MODE2, MODE3 MODE1, MODE2, MODE3 MODE1, MODE2, MODE3 MRFD210304 None MRFD210304 None MRFD210304 None MRFD210304 None MRFD210304 None MRFD210304 None GBFD111202 30MINS, 60MINS, 120MINS, 240MINS None GBFD111202 O&M of BTS Interval Type 1~1440 1~1440 h GBFD111202 O&M of BTS Interval Type 1~12 1~12 None GBFD510102 Fast Move Handover Interval Type 0~600 0~600 m/s GBFD118611 Abis IP over E1/T1 Interval Type 0~100 0~100 per cent GBFD118611 GBFD118611 GBFD118622 Abis IP over E1/T1 Interval Type 0~100 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~167 0~100 per cent 0~31(PEUa), 0~167(POUc) None None None Interval Type 0~167 0~167 None GBFD118611 GBFD111301 Abis IP over E1/T1 Interval Type LAPD Multiplexing at Abis Enumeration Interface Type 0~3 MODE1_1, MODE2_1, MODE3_1, MODE4_1, MODE5_1, MODE6_1, MODE16K 0~3 MODE1_1, MODE2_1, MODE3_1, MODE4_1, MODE5_1, MODE6_1, MODE16K None None GBFD111202 O&M of BTS Interval Type 0~1 0~1 None GBFD118611 GBFD118611 GBFD118622 MRFD210301 MRFD210301 GBFD110703 Abis IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Configuratio n Manageme nt Configuratio n Manageme nt Enhanced Power Control Algorithm Enumeration DISABLE(Disable), Type ENABLE(Enable) DISABLE, ENABLE None Enumeration Type MLPPP, MCPPP MLPPP, MCPPP None Interval Type 0~27 0~27 None Interval Type 0~11 0~11 None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD110601 GBFD510501 GBFD117601 GBFD110802 HUAWEI I Handover HUAWEI II Handover HUAWEI III Power Control Algorithm Preprocessing of Measureme nt Report Interval Type 0~31 0~31 None Interval Type 1~255 NOreport(Do not report), Twice_ps(Twice every Enumeration second), Type Once_ps(Once every 1~255 NOreport, Twice_ps, Once_ps, Once_2s, Once_4s None None GBFD111202 O&M of BTS Interval Type 4~22 4~22 dB GBFD111202 O&M of BTS Interval Type 4~22 4~22 dB GBFD111203 O&M of BSC GBFD111203 O&M of BSC Enumeration Type OFF(Off), ON(On) OFF, ON None ON_WITH_SDCCH(O n with SDCCH), Enumeration ON_WITHOUT_SDCC OFF, ON_WITH_SDCCH, Type H(On without SDCCH) ON_WITHOUT_SDCCH None GBFD118601 Abis over IP Interval Type 128~1500 SoftSynchroniz ed Network Interval Type 1~16 128~1500 None GBFD118201 1~16 None GBFD110501 Enumeration Call Control Type OFF(Off), ON(On) OFF, ON None GBFD117401 MSC Pool Interval Type 0~65535 0~65535 None GBFD117401 MSC Pool Interval Type 1~10 1~10 None GBFD117401 MSC Pool Interval Type 0~1023 0~1023 None GBFD117401 MSC Pool Enumeration Type NO(No), YES(Yes) NO, YES None GBFD117401 GBFD111804 OFFLOAD(Offload), Enumeration NORMAL(Normal), MSC Pool Type UNAVAIL(Unavailable) R98_or_below(R98 or A Interface below), Protocol Enumeration R99_or_above(R99 or Process Type above) Call Reestablish ment Interval Type 5000~40000 OFFLOAD, NORMAL, UNAVAIL None R98_or_below, R99_or_above None GBFD110503 5000~40000 ms GBFD111203 GBFD117701 GBFD117702 GBFD117701 GBFD117702 GBFD117701 GBFD117702 GBFD117701 GBFD117702 GBFD117701 GBFD117702 O&M of BSC BSC Local Switch BTS Local Switch BSC Local Switch BTS Local Switch BSC Local Switch BTS Local Switch BSC Local Switch BTS Local Switch BSC Local Switch BTS Local Switch String Type None 1~32 characters None String Type None 1~10 characters None String Type None 1~10 characters None String Type None 1~10 characters None String Type None 1~10 characters None String Type None 1~10 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117701 BSC Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD117702 BTS Local Switch String Type None 1~32 characters None GBFD510102 GBFD111003 Fast Move Handover Radio Common Channel Manageme nt GBFD111701 GBFD510801 Enumeration Type NO(No), YES(Yes) 1_Times(1_Times), 2_Times(2_Times), Enumeration 4_Times(4_Times), Type 7_Times(7_Times) CLEAR(Cleared), LOP(Lockout of Protection), Board Enumeration FS(Forcibly switchover Switchover Type working link to MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Enumeration MCS4(MCS4), MSRD Type MCS5(MCS5), NO, YES None 1_Times, 2_Times, 4_Times, 7_Times None CLEAR, LOP, FS, MS, EXERS, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9 None None GBFD510801 MSRD Interval Type 10~80 10~80 None GBFD111202 GBFD110601 GBFD510501 GBFD116201 O&M of BTS Interval Type 0~254 HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 NetworkControlled Cell Reselection (NC2) Interval Type 0~255 Gb Interface Function 0~254 None 0~63 dB 0~255 None GBFD119001 Interval Type 1000~3000 1000~3000 ms GBFD113725 BSC Node Redundanc y Interval Type 1~600 1~600 s GBFD114101 GPRS Interval Type 0~31 0~31 None None None Enumeration Type ON(ON), OFF(OFF) ON, OFF None GBFD111705 GSM Flow Control None None Interval Type 50~95 50~95 ALARM_METHOD(Ala rm method), Enumeration LOOP_METHOD(Loop ALARM_METHOD, Type method) LOOP_METHOD per cent None GBFD111804 A Interface Protocol Process Interval Type 0~63 0~31(EIUa/OIUa), 0~63(POUc) None None None Enumeration MET(Metric), Type IMP(Imperial) MET, IMP None GBFD118602 A over IP Interval Type 500~1500 500~1500 None None None Interval Type 256~1650 256~1650 byte GBFD118611 Abis IP over E1/T1 Interval Type 0~1500 0~1500 None GBFD111202 O&M of BTS GBFD114101 GPRS Interval Type 190~240 REPORT6(Report six), 19.0~24.0, step:0.1 REPORT1(Report one), Enumeration REPORT2(Report REPORT6, REPORT1, Type two), REPORT2, REPORT3 V None GBFD111203 O&M of BSC Interval Type 0~255 0~255 s GBFD111203 O&M of BSC Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None GBFD111203 O&M of BSC Interval Type 0~255 0~255 s GBFD111203 O&M of BSC Interval Type 0~15 0~15 min GBFD111203 GBFD118611 GBFD118622 O&M of Enumeration BSC Type NO(No), YES(Yes) Abis IP over E1/T1 A IP over E1/T1 Interval Type 1~1500 NO, YES None 1~1500 ls None GBFD118604 GBFD118610 NoneMUX Interval Type 1~1500 Abis UDP MUX for A Transmissio Enumeration UDPMUX, ABISMUX, n Type ATERMUX 1~1500 ls UDPMUX, ABISMUX, ATERMUX None GBFD111202 GBFD118609 O&M of BTS IP Fault Detection Based on BFD Interval Type 0~12 0~12 None Interval Type 1~512 1~16(FG2a/GOUa), 1~512(FG2c/GOUc) None GBFD117801 Ring Topology Interval Type 1~3 1~3 None GBFD111002 Radio Link Manageme nt Interval Type 5~254 5~254 None GBFD111002 Radio Link Manageme nt Interval Type 34~254 Radio Link Manageme nt Interval Type 29~254 Radio Link Manageme Enumeration nt Type OFF(Off), ON(On) Radio Link Manageme nt Interval Type 5~254 Radio Link Manageme nt Interval Type 5~254 Radio Link Manageme nt Interval Type 23~254 34~254 None GBFD111002 29~254 None GBFD111002 OFF, ON None GBFD111002 5~254 None GBFD111002 5~254 None GBFD111002 23~254 None GBFD114101 GPRS Interval Type 8~30 8~30 None GBFD114101 GPRS Interval Type 2~5 2~5 None GBFD114101 GPRS Interval Type 3~10 3~10 None GBFD510002 Gb Over FR Interval Type 1~255 1~255 None GBFD510002 Gb Over FR Interval Type 1~10 1~10 None GBFD510002 Gb Over FR Interval Type 1~10 1~10 None GBFD116301 Network Assisted Cell Change (NACC) Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111804 A Interface Protocol Process String Type A Interface Protocol Process String Type A Interface Protocol Process String Type A Interface Protocol Process String Type A Interface Protocol Process String Type None 1~49 characters None GBFD111804 None 1~49 characters None GBFD111804 None 1~31 characters None GBFD111804 None 1~31 characters None GBFD111804 None 1~31 characters None GBFD118605 IP QOS String Type None 1~31 characters None GBFD118602 A over IP String Type None 1~49 characters None GBFD118602 A over IP String Type None 1~49 characters None GBFD118602 A over IP String Type None 1~31 characters None GBFD118602 A over IP String Type None 1~49 characters None GBFD118602 A over IP String Type None 1~31 characters None GBFD114101 GBFD111005 GPRS String Type None Enhanced Channel Assignment Enumeration Algorithm Type NO(No), YES(Yes) 1~50 characters None NO, YES None GBFD119115 GBFD115501 GBFD115502 GBFD- Power Control AMR FR AMR HR TFO Configuratio n Manageme nt IBCA (Interferenc e Based Channel Allocation) Configuratio n Manageme nt IBCA (Interferenc e Based Channel Allocation) Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~15 0~15 None Enumeration DISABLE(Disable), Type ENABLE(Enable) DISABLE, ENABLE None MRFD210301 Interval Type 0~5047 0~5047 None GBFD117002 String Type None 1~64 characters None MRFD210301 Interval Type 0~5047 0~5047 None GBFD117002 String Type None 1~64 characters None MRFD210301 Interval Type 0~5047 0~5047 None MRFD210301 String Type None 1~64 characters None MRFD210301 Interval Type 5048~8047 5048~8047 None MRFD210301 String Type None 1~64 characters None GBFD510702 MRFD210301 MRFD210301 MRFD210301 MRFD210301 GBFD116201 GBFD116301 GBFD116201 GBFD116201 MRFD210301 MRFD210301 GBFD110401 GBFD110402 GBFD110801 GBFD110802 Compact BTS Automatic Capacity Planning Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) Configuratio n Manageme nt Configuratio n Manageme nt Basic Cell Selection Basic Cell Reselection Processing of Measureme nt Report Pre- Enumeration Type OFF(OFF), ON(ON) OFF, ON None Interval Type 0~65535 0~65535 None Interval Type 1~65533,65535 1~65533, 65535 None String Type None 1~3 characters None String Type None 1~3 characters None Enumeration Type NO(No), YES(Yes) NotSupport(Not Enumeration Support), Type Support(Support) NO, YES None NOTSUPPORT, SUPPORT None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~7 0~7 None Interval Type 0~7 SELECTION0_PERM, SELECTION1_PERM, SELECTION2_PERM, SELECTION3_PERM, Bit Field Type SELECTION4_PERM, 0~7 SELECTION0_PERM, SELECTION1_PERM, SELECTION2_PERM, SELECTION3_PERM, SELECTION4_PERM, None None Interval Type 0~255 0~255 None GBFD510102 GBFD110601 GBFD510501 GBFD510901 GBFD510901 GBFD510901 GBFD510901 GBFD510901 GBFD510901 GBFD510901 GBFD510901 GBFD510301 GBFD510302 GBFD510301 GBFD510302 Fast Move Handover HUAWEI I Handover HUAWEI II Handover 2G/3G Neighboring Cell Automatic Optimizatio 2G/3G Neighboring Cell Automatic Optimizatio 2G/3G Neighboring Cell Automatic Optimizatio 2G/3G Neighboring Cell Automatic Optimizatio 2G/3G Neighboring Cell Automatic Optimizatio 2G/3G Neighboring Cell Automatic Optimizatio 2G/3G Neighboring Cell Automatic Optimizatio 2G/3G Neighboring Cell Automatic Optimizatio Public Voice Group Call Service Public Voice Group Call Service Public Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms Interval Type 1~31 Interval Type 0~127 0~127 dB Interval Type 0~127 0~127 dB Interval Type 0~127 0~127 dB Interval Type 0~127 0~127 dB Interval Type 0~127 0~127 dB Interval Type 0~127 0~127 dB Interval Type 0~127 0~127 dB Interval Type 0~127 0~127 dB Interval Type 0~7 0~7 None Interval Type 0~7 0~7 None GBFD119107 GBFD111804 MRFD210301 GBFD110601 GBFD510501 Networking Control Enumeration NC0(NC0), NC1(NC1), Mode Type NC2(NC2) NO(NO_DIRECT_CO A Interface NNECT), Protocol Enumeration YES(DIRECT_CONNE Process Type CT) Configuratio n Manageme IP Address nt Type None HUAWEI I Handover HUAWEI II Handover Interval Type 0~60 NC0, NC1, NC2 None NO, YES None 0.0.0.0~255.255.255.255 None 0~60 s None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118611 Abis IP over IP Address E1/T1 Type A Interface Protocol Process Configuratio n Manageme nt Network Operation Mode Support None 0.0.0.0~255.255.255.255 None GBFD111804 INT(INT), INTB(INTB), Enumeration NAT(NAT), Type NATB(NATB) INT, INTB, NAT, NATB None MRFD210301 String Type GBFD119108 None NMOI(Network Operation Mode I), NMOII(Network Enumeration Operation Mode II), Type NMOIII(Network 1~62 characters None NMOI, NMOII, NMOIII None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None MRFD210304 Faulty Manageme nt Interval Type 40~45 Faulty Manageme nt Interval Type 55~59 Faulty Manageme nt Interval Type 40~45 Faulty Manageme nt Interval Type 55~59 Faulty Manageme nt Interval Type 40~45 Faulty Manageme nt Interval Type 55~59 Faulty Manageme nt Interval Type 40~45 Faulty Manageme nt Interval Type 55~59 Faulty Manageme nt Interval Type 40~45 40~45 V MRFD210304 55~59 V MRFD210304 40~45 V MRFD210304 55~59 V MRFD210304 40~45 V MRFD210304 55~59 V MRFD210304 40~45 V MRFD210304 55~59 V MRFD210304 40~45 V MRFD210304 Faulty Manageme nt Interval Type 55~59 Faulty Manageme nt Interval Type 40~45 Faulty Manageme nt Interval Type 55~59 55~59 V MRFD210304 40~45 V MRFD210304 55~59 V GBFD510501 HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~7 0~7 None GBFD510501 HUAWEI II Handover Interval Type 0~100 0~100 per cent GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Handover Interval Type 0~255 0~255 dB GBFD510501 HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None GBFD510501 HUAWEI II Handover Interval Type 0~7 0~7 None GBFD510501 GBFD118605 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 HUAWEI II Handover Interval Type 0~100 ABIS(Abis Interface), A(A Interface), BSC(Ater Interface on Enumeration BSC), TC(Ater IP QOS Type Interface on TC), HUAWEI I Handover HUAWEI II Handover Interval Type 0~64 HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) HUAWEI I Handover HUAWEI II Handover Interval Type 0~70 0~100 per cent ABIS, A, BSC, TC, IUR_G None 0~64 None NO, YES None 0~70 None GBFD111202 GBFD117601 GBFD119107 O&M of BTS Interval Type 1~1000 HUAWEI III Power Control Enumeration OFF(Not Allowed), Algorithm Type ON(Allowed) NODRX(NODRX), 0.24sec(0.24sec), Networking 0.48sec(0.48sec), Control Enumeration 0.72sec(0.72sec), Mode Type 0.96sec(0.96sec), Faulty Manageme nt Interval Type 100~10000 Faulty Manageme nt Interval Type 100~10000 1~1000 Ah OFF, ON None NODRX, 0.24sec, 0.48sec, 0.72sec, 0.96sec, 1.20sec, 1.44sec, 1.92sec s MRFD210304 100~10000 ms MRFD210304 100~10000 ms GBFD116201 NetworkControlled Cell Reselection Enumeration FORBID(Forbid), (NC2) Type PERMIT(Permit) FORBID, PERMIT None GBFD111202 O&M of BTS Interval Type 400~700 40.0~70.0 (step: 0.1) degree Celsius GBFD111705 GBFD111004 GSM Flow Enumeration CLOSE(Close), Control Type OPEN(Open) Radio Dedicated Channel Manageme nt Interval Type 1~255 Group Call Reliability Enhancing CLOSE, OPEN None 5~1275, step:5 min GBFD510309 Interval Type 10~255 10~255 s None GBFD117501 GBFD117501 None Enhanced Interval Type 1~10 Measureme nt Report(EM R) Enhanced Interval Type 0~31 Measureme nt Report(EM R) Interval Type 0~31 1~10 TCH:0~14880, step:480; SDCCH:0~14570, step:470 TCH:0~14880, step:480; SDCCH:0~14570, step:470 None ms ms GBFD117401 MSC Pool Interval Type 0~1023 0~1023 None GBFD119701 SGSN Pool Interval Type 0~1023 System Information Enumeration Sending Type NO(No), YES(Yes) Gb Interface Function 0~1023 None GBFD111101 NO, YES None GBFD119001 Interval Type 0~65534 0~65534 None GBFD119001 GBFD110601 GBFD510501 GBFD115402 Gb Interface Function Interval Type 0~65534 HUAWEI I Handover HUAWEI II Handover Interval Type 1~31 North_latitude(North BSS-Based latitude), LCS (Cell Enumeration South_latitude(South ID + TA) Type latitude) 0~65534 None TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms North_latitude, South_latitude None GBFD510002 Gb Over FR Interval Type 0~65534 0~65534 None GBFD510002 Gb Over FR Interval Type 0~1023 0~1023 None GBFD111202 O&M of BTS Interval Type 0~30 0~30 degree Celsius GBFD111202 GBFD510301 O&M of BTS Public Voice Group Call Service Interval Type 0~30 0~30 degree Celsius Interval Type 1~255 1~255 None None GBFD118611 GBFD118622 GBFD118611 GBFD118622 GBFDGBFD118605 GBFD111202 NoneIP over Interval Type 0~100 Abis E1/T1 A IP over E1/T1 O&MIP over Interval Type 0~100 Abis of E1/T1 A IP over E1/T1 O&M of Interval Type 0~100 IP QOS O&M of BTS 0~100 per cent 0~100 per cent 0~100 per cent Interval Type 0~100 0~100 per cent GBFD111202 MRFD210103 O&M of BTS Link aggregation Interval Type 0~100 0~100 per cent GBFD111202 O&M of BTS Interval Type 0~63 0~63 None GBFD111202 O&M of BTS Remote Electrical Tilt Enumeration Type OFF(OFF), ON(ON) SITE(SITE), Enumeration CELL(CELL), Type BOARD(BOARD) OFF, ON None MRFD210602 SITE, CELL, BOARD None GBFD111207 BTS Test Function MRFD210304 MRFD210304 MRFD210301 Enumeration BYCELL(By CELL), Type BYTRX(By TRX) ALL(Shield by Alarm ID), BOARD(Shield by Faulty Board), PORT(Shield Manageme Enumeration by Port), DSP(Shield nt Type by DSP) BTS(BTS), CELL(CELL), Faulty LOC(LOC), Manageme Enumeration BOARD(BOARD), nt Type PORT(PORT) Configuratio n CELL(Cell), Manageme Enumeration TRX(TRX), nt Type CHN(Channel) BYCELL, BYTRX None ALL, BOARD, PORT, DSP None BTS, CELL, LOC, BOARD, PORT None CELL, TRX, CHN None GBFD119901 Streaming Enumeration QoS(GBR) Type OFF(OFF), ON(ON) OFF, ON None GBFD113201 Concentric Cell Enumeration Type NO(No), YES(Yes) NO, YES None GBFD113728 OML Backup Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD116601 Abis Bypass Interval Type 4~255 4~255 s GBFD111202 O&M of BTS Interval Type 0~63 0~63 None GBFD111202 O&M of BTS Interval Type 0~256 0~256 kbit/s GBFD111202 O&M of BTS Interval Type 0~256 0~256 kbit/s GBFD111202 O&M of BTS Interval Type 0~7 0~7 None GBFD118605 IP QOS Interval Type 0~7 0~7 None GBFD111202 O&M of BTS Interval Type 2~4094 2~4094 None GBFD118601 Abis over IP Interval Type 0~96 0~96 None GBFD111202 O&M of BTS IP Address Type None 0.0.0.0~255.255.255.255 None GBFD111202 GBFD111203 MRFD210305 MRFD210301 GBFD118701 O&M of BTS of O&M BSC Security Manageme nt Configuratio n Manageme nt RAN IP Address Type None 0.0.0.0~255.255.255.255 None String Type None 1~32 characters None Interval Type 1~16777215 1~16777215 None GBFD111202 GBFD111803 GBFD118701 O&M of BTS Interval Type 1~16777215 A Interface Circuit Manageme nt Interval Type 0~4 PRIM(Primary Operator), RAN Enumeration SEC(Secondary Sharing Type Operator) 1~16777215 None 0~4 None PRIM, SEC None GBFD118701 RAN Sharing GBFD118701 GBFD111803 GBFD111801 GBFD111803 RAN Sharing A Interface Circuit Manageme nt Ater Interface 4:1 Multiplexing A Interface Circuit Manageme nt GBFD111203 O&M of BSC Interval Type 0~3 OPINDEX0, OPINDEX1, OPINDEX2, Bit Field Type OPINDEX3 BYCICRANGE(BY CIC RANGE), Enumeration BYCICVALUE(BY CIC Type VALUE) BYTSRANGE(BY TS RANGE), Enumeration BYTSVALUE(BY TS Type VALUE) BYTSRANGE(BY TS RANGE), Enumeration BYTSVALUE(BY TS Type VALUE) BYCICRANGE(BY CIC RANGE), Enumeration BYCICVALUE(BY CIC Type VALUE) 0~3 None OPINDEX0, OPINDEX1, OPINDEX2, OPINDEX3 None BYCICRANGE, BYCICVALUE None BYTSRANGE, BYTSVALUE None BYTSRANGE, BYTSVALUE None BYCICRANGE, BYCICVALUE None GBFD118701 RAN Sharing String Type GBFD113201 Concentric Cell None SysOpt(System optimization), OSubcell(Overlaid Enumeration subcell), Type USubcell(Underlaid 0~255 characters None SysOpt, OSubcell, USubcell, NoPrefer None GBFD113201 Concentric Cell Interval Type 0~63 0~63 dB GBFD113201 GBFD111005 Concentric Cell Interval Type Enhanced Channel Assignment Enumeration Algorithm Type 0~255 0~255 L0(Level0), L1(Level1), L2(Level2), L3(Level3), L4(Level4), L5(Level5), L0, L1, L2, L3, L4, L5, L6, L6(Level6), L7(Level7) L7 bit None None None GBFD111202 O&M of BTS Enumeration Type SDH, SONET SDH, SONET MANUAL(MANUAL), FORCED(FORCED), Enumeration CLEARALARMA(CLE MANUAL, FORCED, Type ARALARMA) CLEARALARMA None None GBFD111202 O&M of BTS Enumeration FORBID(Forbid), Type RESTORE(Restore) FORBID, RESTORE None MRFD211402 MRFD211501 MRFD210401 MBSC Load Balancing IP-Based 2G/3G CoTransmissio n on Base Station Side BSC/RNC Software Manageme nt Interval Type 0~4 0~4 None Interval Type 0~7 0~7 None One_touch(execute on all boards in all Enumeration subracks), Type Step_by_Step One_touch, Step_by_Step None GBFD110101 Frequency Band String Type None 1~200 characters None GBFD113201 Concentric Cell Interval Type 0~63 0~63 dB GBFD114402 GBFD110601 GBFD510501 Enhanced Dual-Band Enumeration Network Type NO(No), YES(Yes) HUAWEI I Handover HUAWEI II Handover Interval Type 500~60000 NO, YES None 500~60000 ms GBFD110601 GBFD510501 GBFD110601 GBFD510501 HUAWEI I Handover HUAWEI II Handover Interval Type 500~60000 HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) Enhanced Dual-Band Network Interval Type 0~100 Enhanced Channel Assignment Algorithm Interval Type 0~50 Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network Enhanced Dual-Band Network 500~60000 ms NO, YES None GBFD114402 0~100 per cent GBFD111005 0~50 W GBFD114402 Interval Type 0~63 0~63 dB GBFD114402 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114402 Interval Type 1~255 1~255 s GBFD114402 Interval Type 1~255 1~255 s GBFD114402 Interval Type 0~63 0~63 dB GBFD114402 GBFD114701 Interval Type 0~100 TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, SemiTS8, TS9, TS10, Permanent TS11, TS12, TS13, Connection Bit Field Type TS14, TS15, TS16, SemiPermanent Connection Interval Type 0~335 0~100 TS0, TS1, TS2, TS3, TS4, per cent TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD114701 0~335 None GBFD111203 O&M of BSC Interval Type 0~15 0~15 None GBFD111203 O&M of BSC Interval Type 0~31 0~31 None GBFD111202 O&M of BTS Enumeration HIGH(High), Type LOW(Low) HIGH, LOW None GBFD111202 O&M of BTS Enumeration HIGH(High), Type LOW(Low) HIGH, LOW None GBFD111202 O&M of BTS Enumeration HIGH(High), Type LOW(Low) HIGH, LOW None GBFD111202 O&M of BTS Enumeration HIGH(High), Type LOW(Low) HIGH, LOW None GBFD510104 Multi-site Cell Interval Type 10~2000 1.0~200.0 (step: 0.1) W GBFD510104 Multi-site Cell Interval Type 300~530 30.0~53.0 (step: 0.1) dB GBFD510104 Multi-site Cell Enhanced Dual-Band Network Enumeration 0_1dB(0.1dB), Type 0_1W(0.1W) 0.1dB, 0.1W None GBFD114402 Interval Type 0~100 0~100 per cent GBFD111202 O&M of BTS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114701 SemiPermanent Connection Interval Type 0~27 0~27 None GBFD111203 O&M of BSC Interval Type 0~27 0~27 None GBFD114701 SemiPermanent Connection Interval Type 0~11 0~11 None MRFD211402 GBFD114321 GBFD114321 MBSC Load Balancing GSM/WCD MA Service Based Handover GSM/WCD MA Service Based Handover Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None MRFD211402 MBSC Load Balancing Interval Type 1~60 SemiPermanent Connection Interval Type 0~255 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 1~60 s GBFD114701 0~255 None MRFD210304 10~3500 mA MRFD210304 10~3500 mA MRFD210304 10~3500 mA MRFD210304 10~3500 mA MRFD210304 10~3500 mA MRFD210304 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 100~10000 Faulty Manageme nt Interval Type 100~10000 Radio Common Channel Manageme nt Interval Type 1~255 10~3500 mA MRFD210304 100~10000 ms MRFD210304 100~10000 ms GBFD111003 1~255 s GBFD111202 O&M of BTS Interval Type 400~700 40.0~70.0 (step: 0.1) degree Celsius GBFD111705 GSM Flow Control Interval Type 50~95 50~95 per cent GBFD111705 GSM Flow Control Interval Type 50~95 50~95 per cent GBFD111705 GSM Flow Control Interval Type 50~95 50~95 per cent GBFD111705 GBFD111612 GBFD119202 GSM Flow Control MultiCarrier Intelligent Voltage Regulation Packet Assignment Taken Over by the BTS Interval Type 50~95 50~95 per cent Enumeration Type NO(NO), YES(YES) NO, YES None Enumeration NO(Not Support), Type YES(Support) NO, YES None GBFD111705 GSM Flow Control Interval Type 10~65535 10~65535 None GBFD110303 Paging Interval Type 0~255 0~255 ms GBFD111705 GSM Flow Control Interval Type 10~65535 10~65535 None GBFD110303 Paging GBFD114101 GBFD114101 GBFD114101 GBFD111602 Interval Type 1~8 Pan_0(0), Pan_1(1), Pan_2(2), Pan_3(3), Pan_4(4), Pan_5(5), Enumeration Pan_6(6), Pan_7(7), GPRS Type 255(not use) Pan_0(0), Pan_1(1), Pan_2(2), Pan_3(3), Pan_4(4), Pan_5(5), Enumeration Pan_6(6), Pan_7(7), GPRS Type 255(not use) Pan_4(4), Pan_8(8), Pan_12(12), Pan_16(16), Enumeration Pan_20(20), GPRS Type Pan_24(24), TRX Power L0(Level0), L1(Level1), Amplifier L2(Level2), L3(Level3), Intelligent Enumeration L4(Level4), L5(Level5), Shutdown Type L6(Level6), L7(Level7) 1~8 Pan_0, Pan_1, Pan_2, Pan_3, Pan_4, Pan_5, Pan_6, Pan_7, 255 Pan_0, Pan_1, Pan_2, Pan_3, Pan_4, Pan_5, Pan_6, Pan_7, 255 None None None Pan_4, Pan_8, Pan_12, Pan_16, Pan_20, Pan_24, Pan_28, Pan_32, 255 None L0, L1, L2, L3, L4, L5, L6, L7 None GBFD111202 O&M of BTS Interval Type 0~9999 0~9999 None GBFD111202 O&M of BTS Interval Type 0~99 0~99 None GBFD118605 IP QOS Enumeration ENABLED(Enabled), Type DISABLED(Disabled) ENABLED, DISABLED None GBFD118605 IP QOS Interval Type 0~65535 0~65535 None None None Interval Type 0~65535 0~65535 None GBFD117602 Active Power Control Interval Type 0~255 0~25.5, step:0.01 dB GBFD510501 GBFD118605 MRFD210301 GBFD119115 HUAWEI II Enumeration Handover Type NO(No), YES(Yes) QoS(QoS), BE(BE), AF11(AF11), AF12(AF12), Enumeration AF13(AF13), IP QOS Type AF21(AF21), MAINCPU_PATCH(Ma Configuratio in programme patch), n DSP_PATCH(DSP Manageme Enumeration programme patch), nt Type UCODE_PATCH(Marc DB0(0dB), DB2(-2dB), DB4(-4dB), DB6(-6dB), DB8(-8dB), DB10(Power Enumeration 10dB), DB12(-12dB), Control Type DB14(-14dB), DB16(- NO, YES None QoS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF None MAINCPU_PATCH, DSP_PATCH, UCODE_PATCH None DB0, DB2, DB4, DB6, DB8, DB10, DB12, DB14, DB16, DB18, DB20, DB22, DB24, DB26, DB28, DB30 dB GBFD110601 HUAWEI I Handover Enumeration Type NO(No), YES(Yes) NO, YES None GBFD110601 HUAWEI I Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD110601 HUAWEI I Handover Interval Type 0~127 0~127 dB GBFD110601 HUAWEI I Handover Interval Type 1~32 0.5~16, step:0.5 s GBFD114101 GBFD110703 GPRS Enhanced Power Control Algorithm Interval Type 0~65535 0~65535 None Interval Type 1~15 TCH:480~7200, step:480; SDCCH:470~7050, step:470 ms GBFD119115 Power Control Enumeration BCCH(BCCH), Type PDCH(PDCH) BCCH, PDCH None GBFD111203 O&M of BSC Interval Type 0~31 0~31 None GBFD114101 GPRS Interval Type 0~31 0~31 None GBFD111203 O&M of BSC Interval Type 0~31 0~31 None GBFD114101 GPRS Interval Type 0~31 0~31 None GBFD111203 O&M of BSC Enumeration Type NO(NO), YES(YES) NO, YES None GBFD113101 GBFD111606 PDCH Dynamic Adjustment Interval Type 10~160 Power Optimizatio n Based on Channel Enumeration Type Type NO(No), YES(Yes) PDCH Dynamic Enumeration Adjustment Type NO(NO), YES(YES) PDCH Dynamic Adjustment Interval Type 10~70 10~160 None NO, YES None GBFD113101 NO, YES None GBFD113101 10~70 None GBFD118602 A over IP Interval Type 1~10 1~10 s GBFD113725 BSC Node Redundanc y Interval Type 0~65534 0~65534 None GBFD118601 Abis over IP Interval Type 0~65534 0~65534 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None GBFD118601 IP Address Abis over IP Type None 0.0.0.0~255.255.255.255 None GBFD118601 GBFD118611 GBFD118622 GBFD118611 GBFD118622 GBFD118609 Abis over IP Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 IP Fault Detection Based on BFD Interval Type 0~2047 0~2047 None IP Address Type None 0.0.0.0~255.255.255.255 None IP Address Type None 0.0.0.0~255.255.255.255 None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118611 Abis IP over IP Address E1/T1 Type None 0.0.0.0~255.255.255.255 None GBFD118611 Abis IP over IP Address E1/T1 Type None 0.0.0.0~255.255.255.255 None GBFD118602 A over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118602 A over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118605 IP QOS IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118605 IP QOS IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118602 A over IP Interval Type 1024~65535 1024~65535 None GBFD111202 GBFD110601 GBFD510501 GBFD116201 GBFD116201 GBFD110601 GBFD510501 O&M of BTS HUAWEI I Handover HUAWEI II Handover NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) HUAWEI I Handover HUAWEI II Handover String Type None 1~63 characters None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~255 0~255 s Interval Type 0~63 0~63 None Interval Type 0~255 0~255 s GBFD118605 GBFD510901 GBFD118611 GBFD118622 GBFD118611 GBFD118622 IP QOS 2G/3G Neighboring Cell Automatic Optimizatio Abis IP over E1/T1 A IP over E1/T1 Abis IP over E1/T1 A IP over E1/T1 Interval Type 1~60 1~60 s Interval Type 1~48 15~720, step:15 min Enumeration Disable(Disable), Type Enable(Enable) Disable, Enable None Enumeration Disable(Disable), Type Enable(Enable) Disable, Enable None GBFD118611 Abis IP over Enumeration E1/T1 Type NO(No), YES(Yes) NO, YES None GBFD119901 Streaming Enumeration NO(No Support), QoS(GBR) Type YES(Support) NO, YES None GBFD111705 GSM Flow Control Interval Type 0~2 0~2 None GBFD111705 GSM Flow Control Interval Type 10~1000 10~1000 None GBFD111705 GSM Flow Control GBFD118605 GBFD118604 GBFD118610 Interval Type 100~600000 BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), Enumeration AF21(AF21), IP QOS AF22(AF22), Abis MUX Type BE, AF11, AF12, UDP MUX AF13, AF21, AF22, for A AF23, AF31, AF32, Transmissio AF33, AF41, AF42, n Bit Field Type AF43, EF Basic Cell Reselection 100~600000 ms BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, , AF43, EF None GBFD110402 Enumeration Type NO(No), YES(Yes) NO, YES None MRFD210305 Security Manageme Enumeration DISABLE(Disabled), nt Type ENABLE(Enabled) DISABLE, ENABLE None GBFD118630 Ethernet OAM Interval Type 5~64 5~64 None GBFD118630 Ethernet OAM Interval Type 64~1024 64~1024 byte None None Interval Type 2~1500 2~1500 byte GBFD118604 Abis MUX Interval Type 24~1031 24~1031 byte GBFD119801 Packet SI Status Enumeration Type NO(No), YES(Yes) NO, YES None None None Interval Type 20~1500 20~1500 byte GBFD118630 Ethernet OAM GBFD119110 Access Interval Type 95~512 0_level(0_level), 1_level(1_level), 2_level(2_level), Enumeration 3_level(3_level), Type 4_level(4_level), 95~512 1_level, 2_level, byte 0_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, None GBFD114201 EGPRS GBFD119110 Access GBFD119110 Access Interval Type 0~50 0_level(0_level), 1_level(1_level), 2_level(2_level), Enumeration 3_level(3_level), Type 4_level(4_level), 0_level(0_level), 1_level(1_level), 2_level(2_level), Enumeration 3_level(3_level), Type 4_level(4_level), 0~10, step:0.2 2_level, dB 0_level, 1_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, None 0_level, 1_level, 2_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, None GBFD114201 EGPRS GBFD119110 Access Interval Type 0~50 0_level(0_level), 1_level(1_level), 2_level(2_level), Enumeration 3_level(3_level), Type 4_level(4_level), 0~10, step:0.2 2_level, dB 0_level, 1_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, None GBFD114201 EGPRS Interval Type 0~50 0~10, step:0.2 dB GBFD118605 IP QOS Interval Type 1~100 100~10000, step:100 ms GBFD118605 IP QOS Interval Type 0~1000 0~1, step:0.001 None GBFD111203 O&M of BSC Enumeration A(A Interface), Type ABIS(Abis Interface) A, ABIS None GBFD111203 O&M of BSC Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD111203 O&M of BSC Interval Type 0~600 0~600 s WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent GBFD110303 Paging Interval Type 1~8 50~400, step: 50 ms GBFD110303 Paging GBFD110303 Paging Interval Type 2~15 2~15 CLOSE(Forced turnoff), OPEN(Forced turnEnumeration on), AUTO(SelfType adaptive) CLOSE, OPEN, AUTO None None WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 MRFD210301 Flow Enumeration Control Type ON, OFF Configuratio n Manageme nt Interval Type 0~11 Faulty Manageme nt Interval Type 1~32 ON, OFF None 0~11 None MRFD210304 1~32 None MRFD210301 GBFD111801 GBFD111803 Configuratio n Manageme nt Interval Type 0~3 Ater Interface 4:1 Multiplexing Interval Type 0~335 A Interface Circuit Manageme nt Interval Type 0~335 0~3 None 0~335 None 0~335 None None None Interval Type 0~335 0~335 None GBFD111203 O&M of BSC Interval Type 0~335 0~335 None MRFD210304 Faulty Manageme nt Interval Type 0~335 0~335 None None None Interval Type 0~7 None None Interval Type 0~335 None None Interval Type 0~335 None None Interval Type 0~335 0~7 0~31(PEUa/EIUa), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~251(E1 of POUc), 0~335(T1 of POUc) 0~31(PEUa/EIUa), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~251(E1 of POUc), 0~335(T1 of POUc) 0~31(PEUa/EIUa), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~251(E1 of POUc), 0~335(T1 of POUc) None None None None None None Interval Type 0~7 0~7 None GBFD111701 Board Switchover Interval Type 0~11 0~11 None None None Interval Type 0~7 0(OIUa), 0~3(POUc) None None None Interval Type 0~7 0~7 None None None Interval Type 0~11 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc) None None GBFD118609 None IP Fault Detection Based on BFD Interval Type 0~11 0~11 None Interval Type 0~11 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc) None None None Interval Type 0~335 0~335 None None None Interval Type 0~31 0~31 None GBFD510002 Gb Over FR Interval Type 0~335 0~335 None GBFD111203 O&M of BSC Interval Type 0~335 0~335 None GBFD111202 O&M of BTS Interval Type 0~355 0~355 None MRFD210304 Faulty Manageme nt Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 O&M of BTS Interval Type 0~335 0~335 None GBFD111202 O&M of BTS Interval Type 0~1 0~1 None GBFD111202 O&M of BTS Interval Type 0~1 0~1 None GBFD119905 PoC QoS Interval Type 250~650 250~650 None GBFD119905 PoC QoS Interval Type 6~120 6~120 None GBFD119905 PoC QoS Interval Type 6~120 NotSupport(Not Enumeration Support), Type Support(Support) 6~120 None GBFD119905 PoC QoS NotSupport, Support None GBFD111202 O&M of BTS Interval Type 0~9 0~9 None GBFD111202 MRFD210301 MRFD210301 O&M of BTS Interval Type 0~9 Configuratio n Manageme nt String Type None Configuratio n Manageme nt String Type None 0~9 None 0~250 characters None 1~250 characters None GBFD111203 O&M of BSC Interval Type 21~65535 21~65535 None GBFD117801 Ring Topology Interval Type 0~1 0~1 None GBFD113728 OML Backup Interval Type 0~1 0~1 None GBFD111203 O&M of BSC Interval Type 0~15 0~15 None GBFD111203 O&M of BSC Interval Type 1~16 1~16 None None MRFD210301 Enumeration None Type IP, HDLC Configuratio n Manageme Enumeration CLOSE(Close), nt Type OPEN(Open) IP, HDLC None CLOSE, OPEN None GBFD118630 MRFD211501 GBFD114323 Ethernet OAM IP-Based 2G/3G CoTransmissio n on Base Station Side 2G/3G Cell Reselection Based on MS State Enumeration Type ETHER, TRUNK TOPEXTOUTPORT(T ETHER, TRUNK OP Extended Out Port), Enumeration TOPEXTINPORT(TOP TOPEXTOUTPORT, Type Extended In Port) TOPEXTINPORT BCCHNorm(BCCHNor Enumeration m), Type BCCHExt(BCCHExt) BCCHNorm, BCCHExt BYBTSTYPE(By BTS Enumeration Type), BYBTS(By Type BTS) None None None GBFD111202 O&M of BTS BYBTSTYPE, BYBTS None GBFD111202 O&M of BTS Interval Type 1~1000 0.1~100.0 (step: 0.1) kVA MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 MRFD210301 Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD111202 O&M of BTS Interval Type 0~1000 0~1000 None GBFD510804 Downlink EGPRS2-A Interval Type 0~50 0~10, step: 0.2 dB GBFD510804 GBFD111202 Downlink EGPRS2-A Interval Type 0~50 0~10, step: 0.2 POWER_48_24(48/24 Power Module), O&M of Enumeration POWER_240_24(240/ POWER_48_24, BTS Type 24 Power Module) POWER_240_24 220VAC(220V AC), Enumeration N48VDC(-48V DC), Type P24VDC(+24V DC) dB None GBFD111202 MRFD210301 O&M of BTS Configuratio n Manageme nt Interval Type 0~13 220VAC, N48VDC, P24VDC None 0~13 None MRFD210301 80W(80W), Configuratio 63W(63W), n 60W(60W), Manageme Enumeration 55W(55W), nt Type 50W(50W), 80W, 63W, 60W, 55W, 50W, 45W, 40W, 31W, 30W, 27W, 26W, 25W, 24W, 21W, 20W, 19W, 18W, 17W, 16W, 15W, None GBFD118611 Abis IP over E1/T1 Interval Type 0~100 0~100 per cent GBFD118611 GBFD118611 GBFD118622 GBFD118611 GBFD118622 Abis IP over E1/T1 Interval Type 0~100 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~499 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~499 0~100 per cent 0~499 None 0~499 None None None Interval Type 0~499 0~499 None GBFD118611 GBFD118611 GBFD118622 Abis IP over E1/T1 Interval Type 0~15 Abis IP over E1/T1 A IP over Enumeration Disable(Disable), E1/T1 Type Enable(Enable) 0~15 None Disable, Enable None None GBFD115001 GBFD115001 None Enhanced Multi Level Precedence and Preemption Enhanced Multi Level Precedence and Preemption Interval Type 0~5 0~5 None Enumeration Type NO(No), YES(Yes) NOT_ALLOWED(Not Enumeration Allowed), Type ALLOWED(Allowed) YES, NO None ALLOWED, NOT_ALLOWED None GBFD110202 Emergency Call Service Enumeration (TS12) Type OFF(Off), ON(On) OFF, ON None GBFD110802 Preprocessing of Measureme nt Report Interval Type 1~255 1~255 None GBFD118601 GBFD114101 Abis over IP Interval Type 0~255 0(No packet access), 3(Packet access of level 1), 4(Packet Enumeration access of levels 1-2), GPRS Type 5(Packet access of 0~255 None 0, 3, 4, 5, 6 None GBFD111705 GBFD110802 GSM Flow Control Preprocessing of Measureme nt Report Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 GBFD110601 GBFD510501 GBFD110601 GBFD510501 Flow Control HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Enumeration Type ON, OFF ON, OFF PRIOR-2, None PRIOR-1(Priority-1), PRIOR-1, PRIOR-2(Priority-2), PRIOR-3, PRIOR-4, PRIOR-3(Priority-3), PRIOR-5, PRIOR-6, Enumeration PRIOR-4(Priority-4), PRIOR-7, PRIOR-8, Type PRIOR-5(Priority-5), None Prior-1, Prior-2, Prior- PRIOR-9, PRIOR-10, Prior-1, Prior-2, Prior-3, 3, Prior-4, Prior-5, Prior- Prior-4, Prior-5, Prior-6, 6, Prior-7, Prior-8, Prior- Prior-7, Prior-8, Prior-9, Enumeration 9, Prior-10, Prior-11, Prior-10, Prior-11, Prior-12, Type Prior-12, Prior-13, Prior- Prior-13, Prior-14, Prior-15, None GBFD117301 Flex Abis Interval Type 0~100 0(0), 1(1), 2(2), 3(3), Enumeration 4(4), 5(5), 6(6), 7(7), Type nouse(no use) 0~100 per cent GBFD114101 GPRS 0, 1, 2, 3, 4, 5, 6, 7, no use None GBFD111804 A Interface Protocol Process Interval Type 0~99 A Interface Protocol Process Interval Type 0~99 0~99 None GBFD111804 0~99 None None GBFD118601 Enumeration Type HIGH, LOW TDME1_O(TDM E1 0 HIGH, LOW Port), TDME1_1(TDM E1 1 Port), FE_E(FE Enumeration Electric Port), TDME1_O, TDME1_1, Abis over IP Type FE_O(FE Optical Port), FE_E, FE_O, IPOE None None None GBFD118601 GBFD118601 Enumeration Abis over IP Type 1(1), 2(2) TDME1_O(TDM E1 0 1, 2 Port), TDME1_1(TDM E1 1 Port), FE_E(FE Enumeration Electric Port), TDME1_O, TDME1_1, Abis over IP Type FE_O(FE Optical Port), FE_E, FE_O, IPOE Security Manageme nt String Type None None MRFD210305 GBFD118601 None DEFAULT(Default Sequence), CUSTOMIZDE(Custo Enumeration mized Sequence), Abis over IP Type DISABLE(DISABLE) A Interface ITUT(ITUT), Protocol Enumeration ANSI(ANSI), Process Type TTC(TTC) 0~200 characters None DEFAULT, CUSTOMIZDE, DISABLE None GBFD111804 ITUT, ANSI, TTC None GBFD510002 Enumeration Q933(Q933), Gb Over FR Type ANSI(Ansi) Q933, ANSI None GBFD111202 O&M of BTS Interval Type 5~300 5~300 s GBFD111610 GBFD111602 Dynamic Cell Power Off Interval Type 0~255 TRX Power Amplifier Intelligent Shutdown Interval Type 60~3600 ALL(Select all ports), Enumeration SINGLE(Select one Type port) 0~255 min 60~3600 s None None ALL, SINGLE None None None None None ALL(Select all ports), Enumeration SINGLE(Select one Type port) ALL, SINGLE ALL(Select all E1/T1 ports), PORT(Select all E1/T1 ports of one Enumeration channelized optical Type port), SINGLE(Select ALL, PORT, SINGLE None None GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD119502 PS Handover None None Enumeration NO(No Support), Type YES(Support) BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, Enumeration AF33, AF41, AF42, Type AF43, EF NO, YES None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF None None None Interval Type 0~7 0~7 None GBFD111705 GSM Flow Control Interval Type 0~7 0~7 None GBFD119102 Packet System Information Interval Type 1~16 Packet System Enumeration Information Type NO(No), YES(Yes) BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, Enumeration AF33, AF41, AF42, IP QOS Type AF43, EF 1~16 None GBFD119102 GBFD118605 NO, YES None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF None GBFD118605 IP QOS Interval Type 0~7 0~7 None GBFD111705 GSM Flow Control Interval Type 0~7 0~7 None GBFD113201 GBFD111003 Concentric Cell Interval Type 0~63 Radio Common Channel Manageme nt Interval Type -121~-104 0~63 None -121~-104 dBm GBFD510104 Multi-site Cell Interval Type -121~-104 -121~-104 dBm GBFD111705 GSM Flow Control Interval Type 10~10000 10~10000 None GBFD111705 GSM Flow Control Interval Type 100~600000 100~600000 ms GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD113201 Concentric Cell Interval Type 0~63 0~63 None GBFD111608 PSU Smart Enumeration Control Type NO(NO), YES(YES) NO, YES None None None Enumeration Type ON(ON), OFF(OFF) ON, OFF None MRFD210304 Faulty Manageme Enumeration BOOL(BOOL), nt Type VALUE(VALUE) BOOL, VALUE None GBFD111203 O&M of BSC Interval Type 123~65534 123~65534 None GBFD110402 Basic Cell Reselection Gb Interface Function GBFD119001 Interval Type 0~31 0~31 GB_OVER_FR(Gb over FR), Enumeration GB_OVER_IP(Gb over GB_OVER_FR, Type IP) GB_OVER_IP s None MRFD210304 None None None None GBFD118401 Faulty Manageme Enumeration BOOL(BOOL), nt Type VALUE(VALUE) B8ZS(B8ZS), HDB3(HDB3), Enumeration AMI(AMI), None Type AMI_ZCS(AMI_ZCS) E1_DOUBLE_FRAME( E1_DOUBLE_FRAME) , Enumeration E1_CRC4_MULTI_FR None Type AME(E1_CRC4_MULT E1_DOUBLE_FRAME( E1_DOUBLE_FRAME) , Enumeration E1_CRC4_MULTI_FR None Type AME(E1_CRC4_MULT E1_DOUBLE_FRAME( E1_DOUBLE_FRAME) , Enumeration E1_CRC4_MULTI_FR None Type AME(E1_CRC4_MULT Abis Transmissio n Optimizatio n Interval Type 0~15 BOOL, VALUE None B8ZS, HDB3, AMI, AMI_ZCS E1_DOUBLE_FRAME, E1_CRC4_MULTI_FRAM E, T1_SUPER_FRAME, T1_EXTENDED_SUPER_ FRAME E1_DOUBLE_FRAME, E1_CRC4_MULTI_FRAM E, T1_SUPER_FRAME, T1_EXTENDED_SUPER_ FRAME E1_DOUBLE_FRAME, E1_CRC4_MULTI_FRAM E, T1_SUPER_FRAME, T1_EXTENDED_SUPER_ FRAME None None None None 0~15 None None None GBFD111202 O&M of BTS Enumeration Type FE, GE APM100(APM100), APM200(APM200), APM30(APM30), Enumeration PS4890(PS4890), Type EPS4815(EPS4815), FE, GE APM100, APM200, APM30, PS4890, EPS4815, SC48200, CUSTOM None None MRFD210305 Security Manageme nt String Type None 0~200 characters None GBFD111202 O&M of BTS String Type None 1~50 characters None GBFD111202 O&M of BTS String Type None 1~50 characters None GBFD510002 Gb Over FR Interval Type 1~65535 Security Manageme nt O&M of BSC Security Manageme nt 1~65535 ms MRFD210305 GBFD111203 MRFD210305 Password Type None 0~64 characters None Password Type None 1~32 characters None GBFD111202 O&M of BTS Password Type None 1~32 characters None MRFD210305 Security Manageme nt Interval Type 6~32 6~32 characters None GBFD111202 O&M of BTS MRFD210304 MRFD210304 Interval Type 0~31 BIT1, BIT6, BIT0, BIT7, BIT8, BIT9, Faulty BIT14, BIT15, BIT16, Manageme BIT17, BIT22, BIT23, nt Bit Field Type BIT24, BIT25, BIT29, BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, Faulty BIT6, BIT7, BIT8, Manageme BIT9, BIT10, BIT11, nt Bit Field Type BIT12 Active Power Control HUAWEI III Power Control Algorithm Enhanced Power Control Algorithm 0~31 BIT1, BIT6, BIT7, None BIT0, BIT8, BIT9, BIT14, BIT15, BIT16, BIT17, BIT22, BIT23, BIT24, BIT25, BIT29, BIT30, BIT31 None BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BI16, BIT7, BIT8, BIT9, BIT10, BIT11, BIT12 None GBFD117602 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD117601 Enumeration Type NO(No), YES(Yes) PWR2(Power control Enumeration II), PWR3(Power Type controlIII) NO, YES None GBFD110703 PWR2, PWR3 None GBFD111003 GBFD111003 GBFD510104 Radio Common Channel Manageme nt Interval Type 0~3 Radio Common Channel Manageme Enumeration nt Type NO(No), YES(Yes) OnlyCurPwrLoc(Only Current Working Location TRXes be Multi-site Enumeration Turned On), Cell Type ALLPwrLoc(All CLASS0(Class0), Enumeration CLASS1(Class1), Type CLASS2(Class2) 0~3 None NO, YES None OnlyCurPwrLoc, ALLPwrLoc None GBFD111202 GBFD111605 GBFD111005 MRFD210301 O&M of BTS Active Backup Power Control Enhanced Channel Assignment Algorithm Configuratio n Manageme nt CLASS0, CLASS1, CLASS2 None Interval Type 0~720 0~720 min Enumeration Type NO(No), YES(Yes) DB0(0.0dB), DB2(0.2dB), DB4(-0.4dB), DB6(-0.6dB), DB8(Enumeration 0.8dB), DB10(-1.0dB), Type DB12(-1.2dB), DB14(- NO, YES DB0, DB2, DB4, DB6, DB8, DB10, DB12, DB14, DB16, DB18, Default None None GBFD111202 O&M of BTS Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111202 O&M of BTS Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111202 O&M of BTS Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None Interval Type 0~63 0~63 None None None Interval Type 0~63 0~63 None None None Interval Type 0~63 0~63 None None None Interval Type 0~63 0~63 None None GBFD114301 GBFD114302 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD114301 GBFD114302 GBFD110601 GBFD510501 GBFD110601 GBFD510501 None GSM/WCD MA Interoperabi lity GSM/TDHUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover GSM/WCD MA Interoperabi lity GSM/TDHUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 Use_Qsearch_I(Use Enumeration Qsearch_I), Type Always(Always) 0~63 None Use_Qsearch_I, Always None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 1~10 1~10 None Interval Type 0~255 0~255 s Interval Type 1~10 Interval Type 0~15 1~10 None -98, -94, -90, -86, -82, -78, 74, (always), -78, -74, -70, 66, -62, -58, -54, Positive infinity(never) None TCH:480~15360, step:480; SDCCH:470~15040, step:470 ms TCH:480~15360, step:480; SDCCH:470~15040, step:470 ms Interval Type 1~32 Interval Type 1~32 GBFD119902 QoS ARP&THP Enumeration NO(Not Support), Type YES(Support) NO, YES None GBFD114301 GBFD114302 GBFD114301 GBFD114302 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD111005 GSM/WCD MA Interoperabi lity GSM/TDGSM/WCD MA Interoperabi lity GSM/TDHUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Enhanced Channel Assignment Algorithm Interval Type 0~15 Interval Type 0~15 -98, -94, -90, -86, -82, -78, 74, (always), -78, -74, -70, 66, -62, -58, -54, Positive infinity(never) None -98, -94, -90, -86, -82, -78, 74, (always), -78, -74, -70, 66, -62, -58, -54, Positive infinity(never) None Enumeration NO(Close), Type YES(Open) NO, YES None Interval Type 1~16 1~16 s Interval Type 1~16 NONE(None), Enumeration DYNAMIC(Dynamic Type power sharing) 1~16 s NONE, DYNAMIC None GBFD111202 O&M of BTS Interval Type 3~20 3~20 None GBFD111202 GBFD110703 GBFD110601 GBFD510501 O&M of BTS Enhanced Power Control Algorithm HUAWEI I Handover HUAWEI II Handover Interval Type 3~20 3~20 None Interval Type 0~4 0~4 dB Enumeration Type NO(No), YES(Yes) NO, YES None GBFD510102 Fast Move Handover Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS AU0, AU1, AU2, AU3, Bit Field Type AU4, AU5, AU6, AU7 AU0, AU1, AU2, AU3, AU4, AU5, AU6, AU7 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type NO(No), YES(Yes) INSIDE_100AH(100AH Inside Storage Battery), Enumeration INSIDE_50AH(50AH Type Inside Storage NO, YES INSIDE_100AH, INSIDE_50AH, OUTSIDE_300AH, OUTSIDE_400AH, OUTSIDE_500AH, None None GBFD111202 O&M of BTS GBFD111202 O&M of BTS 007C(0.07C), Enumeration 010C(0.10C), Type 015C(0.15C) INSIDE_BATTERY(Ins 007C, 010C, 015C ide Storage Battery), OUTSIDE_BATTERY( Enumeration Outside Storage INSIDE_BATTERY, Type Battery) OUTSIDE_BATTERY None None GBFD111202 O&M of BTS AU0, AU1, AU2, AU3, Bit Field Type AU4, AU5, AU6, AU7 AU0, AU1, AU2, AU3, AU4, AU5, AU6, AU7 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type NO(No), YES(Yes) INSIDE_100AH(100AH Inside Storage Battery), Enumeration INSIDE_50AH(50AH Type Inside Storage NO, YES INSIDE_100AH, INSIDE_50AH, OUTSIDE_300AH, OUTSIDE_400AH, OUTSIDE_500AH, None None GBFD111202 O&M of BTS GBFD111202 O&M of BTS 007C(0.07C), Enumeration 010C(0.10C), Type 015C(0.15C) INSIDE_BATTERY(Ins 007C, 010C, 015C ide Storage Battery), OUTSIDE_BATTERY( Enumeration Outside Storage INSIDE_BATTERY, Type Battery) OUTSIDE_BATTERY None None GBFD111202 O&M of BTS AU0, AU1, AU2, AU3, Bit Field Type AU4, AU5, AU6, AU7 AU0, AU1, AU2, AU3, AU4, AU5, AU6, AU7 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type NO(No), YES(Yes) INSIDE_100AH(100AH Inside Storage Battery), Enumeration INSIDE_50AH(50AH Type Inside Storage NO, YES INSIDE_100AH, INSIDE_50AH, OUTSIDE_300AH, OUTSIDE_400AH, OUTSIDE_500AH, None None GBFD111202 O&M of BTS GBFD111202 MRFD210301 MRFD210301 O&M of BTS Configuratio n Manageme nt Interval Type 0~255 Configuratio n Manageme nt Interval Type 0~255 007C(0.07C), Enumeration 010C(0.10C), Type 015C(0.15C) INSIDE_BATTERY(Ins 007C, 010C, 015C ide Storage Battery), OUTSIDE_BATTERY( Enumeration Outside Storage INSIDE_BATTERY, Type Battery) OUTSIDE_BATTERY None None 0~255 None 0~255 None GBFD114101 GBFD510701 GBFD510701 GBFD510702 GBFD111003 GBFD111003 GBFD111003 GPRS Compact BTS Automatic Configuratio n and Compact BTS Automatic Configuratio n and Compact BTS Automatic Capacity Planning Radio Common Channel Manageme nt Radio Common Channel Manageme nt Radio Common Channel Manageme nt Interval Type 0~255 0~255 None Interval Type 0~255 0~255 None Interval Type 0~255 0~255 None Interval Type 0~255 0~255 None Interval Type -121~-104 -121~-104 dBm Interval Type 0~63 0~63 dB Interval Type 0~65535 0~65535 None GBFD510104 Multi-site Cell Interval Type -121~-104 -121~-104 dBm GBFD114101 GPRS Interval Type 0~7 0~7 None GBFD114101 GBFD111003 GBFD114101 Enumeration GPRS Type NO(No), YES(Yes) Radio Common Channel Manageme nt Interval Type 0~255 0dB(0dB), 2dB(2dB), 4dB(4dB), 6dB(6dB), 8dB(8dB), Enumeration 10dB(10dB), GPRS Type 12dB(12dB), 10M(10M), Enumeration 100M(100M), Abis over IP Type AUTO(Auto) AMR Coding Rate ALG1(Algorithm I), Threshold Enumeration ALG2(Algorithm II), Adaptive Type NONE(None) AMR Coding Rate Threshold Enumeration DISABLE(Disable), Adaptive Type ENABLE(Enable) Processing of Measureme nt Report Interval Type 1~255 Configuratio LASTRBP(last n rollbackpoint), Manageme Enumeration APPOINTRBP(appoint nt Type ed rollbackpoint) All), REC_ALL(Record REC_ERR(Record Errors), O&M of Enumeration REC_NON(Record BSC Type None) NO, YES None 0~255 None 0dB, 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB, no use dB GBFD118601 10M, 100M, AUTO None GBFD115506 ALG1, ALG2, NONE None GBFD115506 DISABLE, ENABLE None GBFD110801 1~255 None MRFD210301 LASTRBP, APPOINTRBP None GBFD111203 REC_ALL, REC_ERR, REC_NON None GBFD111202 O&M of BTS Interval Type 0~249 0~249 None GBFD111202 O&M of BTS Interval Type 0~249 0~249 None GBFD111202 MRFD210301 O&M of BTS Interval Type Configuratio n Manageme Enumeration nt Type 0~249 INDEPENDENT(Indep endent Receiver), DIVIDING(Dividing Receiver), FOURDIVERSITY(Fou 0~249 INDEPENDENT, DIVIDING, FOURDIVERSITY, MAINDIVERSITY, NONE None None GBFD118605 IP QOS Interval Type 0~100 0~100 None GBFD112501 GBFD112501 GBFD113201 GBFD115501 GBFD113201 GBFD115502 TCH ReEnumeration assignment Type NO(No), YES(Yes) Same_Band(Same Band), TCH ReEnumeration Diff_Band(Different assignment Type Band) Concentric Cell AMR FR Concentric Cell AMR HR NO, YES None Same_Band, Diff_Band None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None GBFD113201 Concentric Cell Interval Type 0~63 0~63 dB GBFD113201 Concentric Cell Interval Type 0~63 0~63 dB GBFD113201 Concentric Cell Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD118605 IP QOS Interval Type 20~99 20~99 None GBFD113201 Concentric Cell Interval Type 0~70 0~70 None GBFD113201 MRFD210301 Concentric Cell Configuratio n Manageme nt Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type YES(YES), NO(NO) YES, NO None GBFD111705 GSM Flow Control Interval Type 0~50 0~50 ms GBFD111705 GSM Flow Control Interval Type 0~768 0~768 None MRFD210502 BSC/RNC Clock Interval Type 0~31 0~31 None MRFD210502 BSC/RNC Clock Interval Type 0~31 0~31 None MRFD210502 BSC/RNC Clock Interval Type 0~31 0~31 None MRFD210502 BSC/RNC Clock Interval Type 0~31 0~31 None MRFD210502 BSC/RNC Clock Enumeration Type OFF(OFF), ON(ON) OFF, ON None MRFD210502 BSC/RNC Clock Enumeration Type OFF(OFF), ON(ON) OFF, ON None MRFD210502 BSC/RNC Clock Enumeration Type NO(NO), YES(YES) NO, YES None GBFD117702 BTS Local Switch Interval Type 0~95 0~95 None GBFD113725 BSC Node Redundanc Compound y Type hour, min, sec 00:00:00~23:59:59 None GBFD113725 GBFD113725 BSC Node Redundanc y Interval Type 1~3600 REHOSTRIGHTNOW( ReHostRightNow), BSC Node REHOSTDELAY(ReHo Redundanc Enumeration stDelay), y Type REHOSTWHEN(ReHo SoftSynchroniz Enumeration ed Network Type NO(NO), YES(YES) 1~3600 REHOSTRIGHTNOW, REHOSTDELAY, REHOSTWHEN s None GBFD118201 NO, YES None GBFD111202 O&M of BTS Interval Type 0~62 0~62 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES OFF(OFF), POWERSHARING(Po wer Sharing Between Enumeration Boards), RF_FH(RF OFF, POWERSHARING, Type Frequency Hopping RF_FH None None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 O&M of BTS Interval Type 0~255 0~255 None GBFD111202 O&M of BTS Enumeration A(A), B(B), Type NONE(NONE) A, B, NONE None GBFD118605 IP QOS String Type None 1~31 characters None None None String Type None 1~250 characters None GBFD118603 Gb over IP Simplified Cell Broadcast Robust Air Interface Signalling Robust Air Interface Signalling Robust Air Interface Signalling Interval Type 0~1023 0~1023 None GBFD113602 Interval Type 0~65535 0~65535 None GBFD113721 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD113721 Interval Type 0~7 0~7 None GBFD113721 Enumeration Type NO(No), YES(Yes) NO, YES None MRFD210304 Faulty Manageme Enumeration nt Type NO(No), YES(Yes) NO, YES None GBFD111203 GBFD116201 GBFD116201 GBFD116201 GBFD116201 O&M of BSC NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2) Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~63 0~63 None Interval Type 1~10 1~10 s Interval Type 1~32 1~32 None Interval Type 1~32 1~32 None GBFD113101 GBFD111602 PDCH Dynamic Adjustment Interval Type 0~8 TRX Power Amplifier Intelligent Shutdown Interval Type 0~16 0~8 None 0~16 None GBFD111202 O&M of BTS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Interval Type 0~65535 0~65535 min MRFD210305 Security Manageme nt Interval Type 1~60 1~60 min GBFD114101 GBFD111612 GPRS MultiCarrier Intelligent Voltage Regulation Interval Type 1~255 1~255 None Interval Type 1~15 1~15 min GBFD114101 GPRS Gb Interface Function A Interface Protocol Process O&M of BSC License Manageme nt Abis IP over E1/T1 A IP over E1/T1 GBFD119001 Interval Type 1~120 MSLOST(RADIO_STS 1~120 _MS_LOST), QUALITYBAD(RADIO Enumeration _STS_QUALITY_BAD) MSLOST, QUALITYBAD, Type , CELLRESELECT s None GBFD111804 GBFD111203 MRFD210403 GBFD118611 GBFD118622 Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 2~5 2~5 s GBFD118611 GBFD118622 MRFD210304 Abis IP over E1/T1 A IP over E1/T1 Interval Type 2~5 Noneed, Manually, Faulty Reset, Normally, Manageme Correlative, nt Bit Field Type Configuration, Expired 2~5 s Noneed, Manually, Reset, Normally, Correlative, Configuration, Expired None MRFD211402 MBSC Load Balancing Interval Type 0~86400 0~86400 s GBFD116001 MRFD210301 GBFD111004 Resource Reservation Interval Type 0~190 Configuratio n Manageme nt Interval Type 0~21 Radio Dedicated Channel Manageme nt Interval Type 0~255 0~190 None 0~21 None 0~255 s GBFD111203 GBFD110000 O&M of BSC Interval Type 1~100 GBSS9.0 System Improveme Enumeration nt Type NO(No), YES(Yes) BTS GPS Synchroniz ation Network Assisted Cell Change (NACC) 1~100 None NO, YES None GBFD510401 Enumeration RGPS(RGPS), Type GPS(GPS) RGPS, GPS None GBFD116301 None GBFD111004 Enumeration NO(No Support), Type YES(Support) TS4, TS1, TS2, TS3, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, None Bit Field Type TS15, TS16, TS17, Radio 4_Times, 8_Times, Dedicated 12_Times, 16_Times, Channel 20_Times, 24_Times, Manageme Enumeration 28_Times, 32_Times, nt Type 36_Times, 40_Times, NO, YES TS3, TS4, TS5, None TS1, TS2, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None 1920~30720, step: 480 ms GBFD116902 MRFD210301 Ater STANDALONETC(Sta Compressio nd Alone TC ), n MASTERINPOOLTC( STANDALONETC, Transmissio Enumeration Master in Pool TC), MASTERINPOOLTC, n Type SLAVEINPOOLTC(Sla SLAVEINPOOLTC Configuratio n Manageme nt Interval Type 0~4095 0~4095 None None MRFD211402 MBSC Load Balancing Interval Type 0~6,255 0~6, 255 None MRFD211402 MBSC Load Balancing Interval Type 0~16 0~16 None MRFD211402 MBSC Load Balancing String Type Security Manageme nt String Type None 1~64 characters None MRFD210305 None 0~200 characters None GBFD118603 Gb over IP Interval Type 1~100 1~100 None GBFD118603 GBFD116801 Gb over IP Voice Quality Index (Uplink VQI) GBFD119107 GBFD119107 Interval Type 1~100 DISABLE(Disable), ENABLE(Enable), Enumeration UNSUPPORT(Unsupp Type ort) 0.48sec(0.48sec), 0.96sec(0.96sec), Networking 1.92sec(1.92sec), Control Enumeration 3.84sec(3.84sec), Mode Type 7.68sec(7.68sec), 0.48sec(0.48sec), 0.96sec(0.96sec), Networking 1.92sec(1.92sec), Control Enumeration 3.84sec(3.84sec), Mode Type 7.68sec(7.68sec), 1~100 None DISABLE, ENABLE, UNSUPPORT None 0.48sec, 0.96sec, 1.92sec, 3.84sec, 7.68sec, 15.36sec, 30.72sec, 61.44sec s 0.48sec, 0.96sec, 1.92sec, 3.84sec, 7.68sec, 15.36sec, 30.72sec, 61.44sec s GBFD118605 IP QOS Interval Type 20~99 20~99 None GBFD116801 GBFD117501 GBFD117501 Voice Quality Index (Uplink VQI) Enhanced Measureme nt Report(EM R) Enhanced Measureme nt Report(EM R) NO(Not report), Enumeration YES(Report), Type NONE(None) NO, YES, NONE TCH:0~14880, step:480; SDCCH:0~14570, step:470 TCH:0~14880, step:480; SDCCH:0~14570, step:470 None Interval Type 0~31 ms Interval Type 0~31 ms GBFD118605 IP QOS Interval Type 0~2047 0~2047 None None None Enumeration Type SHARE(SHARE) SHARE None GBFD118605 GBFD110601 GBFD510501 GBFD114301 GBFD114302 GBFD114301 GBFD114302 IP QOS HUAWEI I Handover HUAWEI II Handover GSM/WCD MA Interoperabi lity GSM/TDGSM/WCD MA Interoperabi lity GSM/TD- Enumeration Type SHARE, EXCLUSIVE SHARE, EXCLUSIVE None Interval Type 0~255 0~255 s Interval Type 0~63 0~63 dB Interval Type 0~63 0~63 dB None None Enumeration BASIS_OF_B1, Type BASIS_OF_B2 BASIS_OF_B1, BASIS_OF_B2 None None None GBFD114101 GPRS Enumeration BASIS_OF_B1, Type BASIS_OF_B2 MINUS_52db(-52db), MINUS_48db(-48db), MINUS_44db(-44db), Enumeration MINUS_40db(-40db), Type MINUS_36db(-36db), BASIS_OF_B1, BASIS_OF_B2 MINUS_52db, MINUS_48db, MINUS_44db, MINUS_40db, MINUS_36db, None dB GBFD111202 O&M of BTS Interval Type 0~64 0~64 kbit/s GBFD111202 O&M of BTS Interval Type 0~63 0~63 None GBFD111202 O&M of BTS Interval Type 0~7 0~7 None GBFD111202 O&M of BTS Interval Type 0~64 0~64 kbit/s GBFD111202 O&M of BTS Interval Type 2~4094 2~4094 None GBFD118601 MRFD210301 GBFD510901 Abis over IP Configuratio n Manageme nt 2G/3G Neighboring Cell Automatic Optimizatio Interval Type 0~96 0~96 COMMISSIONING(Co mmissioning), Enumeration UPGRADE(Upgrade), COMMISSIONING, Type RESTORE(Restore) UPGRADE, RESTORE None None Interval Type 0~127 0~127 dB GBFD111203 O&M of BSC String Type None 1~50 characters None GBFD111804 A Interface Protocol Enumeration Process Type OFF(OFF), ON(ON) OFF, ON None GBFD118611 Abis IP over E1/T1 Interval Type 1~65535 Emergency Call Service (TS12) Interval Type 0~190 1~65535 ms GBFD110202 0~190 None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None Interval Type 0~4294967295 0~4294967295 None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None Interval Type 0~4294967295 0~4294967295 None None None Interval Type 0~4294967295 0~4294967295 None None GBFD111602 GBFD111701 None Interval Type 0~4294967295 TRX Power Amplifier Intelligent Shutdown Interval Type 0~3 NONREVERTIVE(NONREVERTIVE), Board Enumeration REVERTIVE(REVERTI Switchover Type VE) 0~4294967295 None 0~3 None NON-REVERTIVE, REVERTIVE None GBFD118602 A over IP Interval Type 0~4294967295 0~4294967295 None GBFD118602 A over IP Interval Type 1~5 1~5 per cent GBFD118602 A over IP Enumeration OFF(Close), Type ON(Open) OFF, ON None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118602 A over IP Interval Type 0~100 0~100 per cent GBFD118602 A over IP Interval Type 0~100 0~100 per cent GBFD118602 A over IP Interval Type 500~60000 500~60000 ms GBFD118602 A over IP Interval Type 500~60000 500~60000 ms GBFD118602 GBFD115506 A over IP AMR Coding Rate Threshold Adaptive Interval Type 500~60000 500~60000 ms Enumeration DISABLE(Disable), Type ENABLE(Enable) DISABLE, ENABLE None GBFD510805 Latency Reduction Interval Type 10~80 10~80 None GBFD118601 Enumeration NEXTHOP(Next Hop), Abis over IP Type OUTIF(Out Interface) NEXTHOP, OUTIF None GBFD118605 IP QOS Interval Type 0~1000 0~1000 None GBFD118605 IP QOS Interval Type 1~100 1~100 None GBFD111202 O&M of BTS Interval Type 0~999 0~999 None GBFD118605 IP QOS Interval Type 1~3000000 1~3000000 kbit/s GBFD118605 IP QOS Interval Type 0~4000000 0~4000000 kbit/s GBFD114101 GPRS Interval Type 0~63 0~63 None GBFD115501 AMR FR System Information Sending HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Interval Type 0~70 0~70 None GBFD111101 GBFD110601 GBFD510501 GBFD110601 GBFD510501 Interval Type 0~63 0~63 dB Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~70 0~70 None GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None Interval Type 0~70 0~70 None GBFD111202 O&M of BTS Interval Type 0~249 0~249 None GBFD111202 O&M of BTS Interval Type 0~249 0~249 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Interval Type 0~249 RXUNAME(By RXU Name), RXUPOS(By RXU Position No), Enumeration SRNSN(By Subrack Type No) 0~249 None RXUNAME, RXUPOS, SRNSN None GBFD111202 O&M of BTS RXUNAME(RXUName Enumeration ), RXUPOS(RXUPOS), RXUNAME, RXUPOS, Type SRNSN(SRNSN) SRNSN None GBFD111202 O&M of BTS String Type None 1~64 characters None GBFD111202 O&M of BTS String Type None 1~64 characters None GBFD111202 O&M of BTS String Type None 1~64 characters None GBFD111202 O&M of BTS Interval Type 1~6 1~6 None GBFD111202 O&M of BTS Interval Type 1~6 1~6 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Interval Type 1~6 DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), Enumeration MRFU(MRFU), Type GRFU(GRFU), 1~6 DRRU, DRFU, MRRU, MRFU, GRRU, GRFU, BTS3900E None None None None Enumeration Type OFF(OFF), ON(ON) OFF, ON None None None MRFD210304 GBFD111202 GBFD510301 Interval Type 0~15 48VDISABLE, RES0, RES1, RES2, Faulty TSDISABLED, Manageme HSDISABLED, RES3, nt Bit Field Type RES4 BT1_DISABLE, AH_DISABLE, AT1_DISABLE, O&M of AT2_DISABLE, BTS Bit Field Type BT2_DISABLE Public Voice Group Call Enumeration Service Type NO(No), YES(Yes) Network Support SAIC Network Support SAIC Network Support SAIC 0~15 48VDISABLE, RES0, RES1, RES2, TSDISABLED, BT1_DISABLE(0), AH_DISABLE(1), AT1_DISABLE(2), AT2_DISABLE(3), BT2_DISABLE(4) None None None NO, YES None GBFD118103 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD118103 Interval Type 0~2 0~2 None GBFD118103 MRFD210304 Interval Type 0~4 T1_DISABLE, ET_DISABLE, Faulty ET1_DISABLE, Manageme ET2_DISABLE, nt Bit Field Type T2_DISABLE Dynamic Cell Power Off Interval Type 0~2047 Dynamic Cell Power Enumeration BYNAME(By name), Off Type BYID(By index) Dynamic Cell Power Off Interval Type 1~16 Dynamic Cell Power Off Interval Type 0~100 0~4 T1_DISABLE, ET_DISABLE, ET1_DISABLE, ET2_DISABLE, T2_DISABLE None None GBFD111610 0~2047 None GBFD111610 BYNAME, BYID None GBFD111610 1~16 None GBFD111610 0~100 per cent GBFD111610 GBFD111004 Dynamic Cell Power Off String Type None Radio Dedicated Channel Manageme nt Interval Type 0~63 1~64 characters None 0~30240, step: 480 ms MRFD210304 MRFD210304 MRFD210304 Faulty Manageme WATER_IMMERSED, WATER_IMMERSED, nt Bit Field Type SMOG, GM_DISABLE SMOG, GM_DISABLE WIDISABLE, WIDISABLE, Faulty SMDISABLE, SMDISABLE, Manageme IMDISABLE, IMDISABLE, nt Bit Field Type GMDISABLE GMDISABLE WILOW, Faulty SMLOW, Manageme WILOW, SMLOW, IMLOW, nt Bit Field Type IMLOW, GMLOW GMLOW, None None None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) WS_DISABLE, SS_DISABLE, Bit Field Type GS_DISABLE NO, YES WS_DISABLE(0), SS_DISABLE(1), GS_DISABLE(2) None GBFD111202 O&M of BTS None GBFD118201 SoftSynchroniz ed Network Interval Type 0~2047 SoftSynchroniz ed Network String Type Enhanced Measureme nt Report(EM Enumeration R) Type 0~2047 None GBFD118201 None ADD0dB(+0dB), ADD10dB(+10dB), Automatic(Automatic) 1~64 characters None GBFD117501 ADD0dB, ADD10dB, Automatic None GBFD118603 Gb over IP Interval Type 0~63 0~63 None GBFD510102 Fast Move Handover Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms MRFD210301 Configuratio n Manageme nt Interval Type 0~2047 0~2047 None GBFD111202 O&M of BTS Simplified Cell Broadcast String Type GBFD113602 None GERMAN(GERMAN), ENGLISH(ENGLISH), ITALIAN(ITALIAN), Enumeration FRENCH(FRENCH), Type SPANISH(SPANISH), 1~64 characters None GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH, DUTCH, SWEDISH, DANISH, PORTUGUESE, FINNISH, None GBFD111202 O&M of BTS Interval Type 0~7 0~7 Valid command string, without the ';'at the end of the string. None GBFD111203 O&M of BSC Any Type None None GBFD111203 O&M of BSC Enumeration BYBTSID(By BTS ID), Type BYCELLID(By Cell ID) BYBTSID, BYCELLID None GBFD111203 GBFD114301 GBFD114302 O&M of BSC GSM/WCD Interval Type 0~23 MA Interoperabi lity GSM/TDInterval Type 0~511 Faulty Manageme nt Interval Type 1~2147483646 0~23 None 0~511 None MRFD210304 1~2147483646 None GBFD118602 A over IP Interval Type 0~1199 0~1199 None GBFD111203 O&M of BSC Compound Type year, month, date 2000-1-1~2037-12-31 None MRFD210304 Faulty Manageme Compound nt Type year, month, day 2000-1-1~2037-12-31 None MRFD210304 Faulty Manageme Compound nt Type year, month, day 2000-1-1~2037-12-31 None MRFD210304 Faulty Manageme nt Interval Type 7~90 7~90 d GBFD111701 Board Enumeration 1E-3, 1E-4, 1E-5, 1ESwitchover Type 6, 1E-7, 1E-8, 1E-9 1E-3, 1E-4, 1E-5, 1E-6, 1E7, 1E-8, 1E-9 None GBFD111202 MRFD210301 MRFD210301 GBFD110502 GBFD110502 GBFD111004 GBFD111004 GBFD111004 GBFD111004 O&M of BTS Configuratio n Manageme nt Configuratio n Manageme nt Assignment and Immediate Assignment Assignment and Immediate Assignment Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Compound Type year, month, day 2000-01-01~2050-12-31 None Interval Type 1~31 1~31 d Interval Type 1~191 1~191 None Enumeration Type OFF(Off), ON(On) OFF, ON None Interval Type 0~100 0~10, step:0.1 s Interval Type 0~63 0~63 dB Interval Type 0~70 0~70 None Interval Type 0~63 0~63 dB Interval Type 0~70 0~70 None GBFD113001 SDCCH Dynamic Enumeration Adjustment Type NO(No), YES(Yes) NO, YES None GBFD111701 GBFD113503 GBFD111605 GBFD110601 GBFD510501 GBFD117601 GBFD110601 GBFD510501 GBFD110601 GBFD510501 Board Switchover A5/1 Encryption Flow Optimizatio n Active Backup Power Control HUAWEI I Handover HUAWEI II Handover HUAWEI III Power Control Algorithm HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Enumeration Type DISABLE, ENABLE DISABLE, ENABLE None Enumeration Type OFF(Off), ON(On) OFF, ON None Enumeration DISABLE(Disable), Type ENABLE(Enable) DISABLE, ENABLE None Interval Type 0~60 0~60 s Interval Type 0~5 0~5 None Interval Type 0~255 0~255 s Interval Type 0~63 0~63 dB GBFD118603 Gb over IP Interval Type 0~63 0~63 None GBFD111701 Board Enumeration HIGH(HIGH), Switchover Type LOW(LOW) HIGH, LOW None GBFD111202 O&M of BTS Interval Type 40~70 40~70 degree Celsius MRFD210304 Faulty Manageme nt Interval Type 0~65535 0~65535 s MRFD210304 Faulty Manageme nt Interval Type 0~65535 0~65535 s GBFD111202 GBFD117501 O&M of BTS Enhanced Interval Type 350~553 Measureme nt Report(EM Enumeration R) Type NO(No), YES(Yes) 35.0~55.3 (step: 0.1) V NO, YES None GBFD111202 O&M of BTS System Information Sending End-to-End MS Signaling Tracing HUAWEI I Handover HUAWEI II Handover A Interface Protocol Process Point To Point Short Message Service (TS21, String Type None 1~63 characters None GBFD111101 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD116401 GBFD110601 GBFD510501 Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111804 Enumeration Type NO(No), YES(Yes) NO, YES None GBFD110203 GBFD510307 Group Call EMLPP GBFD510307 GBFD111612 Group Call EMLPP MultiCarrier Intelligent Voltage Regulation Enumeration Type NO(No), YES(Yes) NoPriority(No Priority), Priority4(Priority 4), Priority3(Priority3), Enumeration Priority2(Priority 2), Type Priority1(Priority 1), NoPriority(No Priority), Priority4(Priority 4), Priority3(Priority3), Enumeration Priority2(Priority 2), Type Priority1(Priority 1), NO, YES NoPriority, Priority4, Priority3, Priority2, Priority1, Priority0, PriorityB, PriorityA NoPriority, Priority4, Priority3, Priority2, Priority1, Priority0, PriorityB, PriorityA None None None Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111101 System Information Enumeration Sending Type NO(No), YES(Yes) System Information Enumeration Sending Type NO(No), YES(Yes) System Information Enumeration Sending Type NO(No), YES(Yes) NO, YES None GBFD111101 NO, YES None GBFD111101 NO, YES None GBFD111202 O&M of BTS Interval Type 0~6 SUPPORT(Support), Enumeration UNSUPPORT(Not Type Support) 0~6 None GBFD111202 O&M of BTS SUPPORT, UNSUPPORT None GBFD111203 O&M of BSC Interval Type 1024~65535 1000~65535 None GBFD111203 O&M of BSC Remote Electrical Tilt Interval Type 1024~65535 1000~65535 None MRFD210602 String Type None 1~17 characters None GBFD111203 O&M of BSC IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118602 A over IP SEPARATE(Separate), Enumeration TOGETHER(Together) SEPARATE, TOGETHER, Type , AIP(AIP) AIP None GBFD118601 GBFD510601 Enumeration TDM, HDLC, Abis over IP Type HDLC_HubBTS, IP PICO Automatic Configuratio n and Enumeration Planning Type TDM, HDLC, IP TDM, HDLC, HubBTS, IP None TDM, HDLC, IP None GBFD111203 MRFD210305 GBFD118601 O&M of SYSTEM(System BSC Command), Security CONFIG(Configuration Manageme Enumeration Management), nt Type MAINTAIN(Maintenanc OML(OML), RSL(RSL), EML(EML), ESL(ESL), Enumeration CSVOICE(CS Voice), Abis over IP Type CSDATA(CS Data), SYSTEM, CONFIG, MAINTAIN, STAT, ALARM None OML, RSL, EML, ESL, CSVOICE, CSDATA, PSHIGHPRI, PSLOWPRI, OTHERDATA None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Interval Type 0~5 0~5 None GBFD119701 MRFD210301 SGSN Pool Interval Type 0~65535 Configuratio n Manageme nt String Type None 0~65535 None 1~20 characters None GBFD119701 SGSN Pool Interval Type 1~10 1~10 None GBFD119701 SGSN Pool Interval Type 0~1023 0~1023 None GBFD119701 Enumeration SGSN Pool Type NO(No), YES(Yes) NO, YES None GBFD114101 GPRS 0( Release 98 or Enumeration older), 1(Release 99 Type onwards) Release 98 or older, Release 99 onwards None GBFD119701 UNISTALL(Uninstall), Enumeration ALLOW(Allow), SGSN Pool Type DENY(Deny) UNISTALL, ALLOW, DENY None GBFD111705 GSM Flow Control Interval Type 50~95 50~95 per cent GBFD111203 O&M of BSC Interval Type 0~27 0~27 None GBFD118701 RAN Sharing Enumeration Type NO(NO), YES(YES) NO, YES None MRFD210304 GBFD111605 Faulty Manageme Enumeration unshielded(Unshielded nt Type ), shielded(Shielded) unshielded, shielded Active Backup Power Control Interval Type 0~12 0~12 System Information Sending HUAWEI I Handover HUAWEI II Handover None h GBFD111101 GBFD110601 GBFD510501 Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD118201 SoftSynchroniz ed Network Interval Type 1~10 A Interface Protocol Process Interval Type 0~186 A Interface Protocol Process Interval Type 0~186 1~10 None GBFD111804 0~186 None GBFD111804 0~186 None GBFD118602 A over IP Interval Type 0~15 0~15 None GBFD118603 Gb over IP Interval Type 0~255 0~255 None GBFD118603 Gb over IP Interval Type 0~255 0~255 None GBFD118605 IP QOS Interval Type 0~7 0~7 None GBFD118201 GBFD110601 GBFD510501 SoftSynchroniz ed Network Interval Type 1~10 HUAWEI I Handover HUAWEI II Handover Interval Type 1~31 A Interface Protocol Process Interval Type 0~15 HUAWEI I Handover HUAWEI II Handover Interval Type 1~31 1~10 None TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms GBFD111804 GBFD110601 GBFD510501 0~15 None TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms GBFD119303 Load Sharing Interval Type 0~65535 0~65535 ms GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None GBFD111203 O&M of BSC String Type None 1~32 characters None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None GBFD111203 O&M of BSC Interval Type 0~65535 0~65535 None GBFD118201 SoftSynchroniz ed Network Interval Type 0~255 0~255 None GBFD118606 Clock over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD510104 Multi-site Cell GBFD111207 BTS Test Function Interval Type 0~35 0~35 E1SELFLOOP(E1 Self Loopback), Enumeration IASUSELFLOOP(IASU E1SELFLOOP, Type Self Loopback) IASUSELFLOOP None None GBFD111804 B0000(B0000), B0001(B0001), A Interface B0010(B0010), Protocol Enumeration B0011(B0011), Process Type B0100(B0100), BSC Node Redundanc y Interval Type Configuratio n Manageme Enumeration nt Type B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, None GBFD113725 MRFD210301 1~600 DATE(Input with date), 1~600 WEEK(Input with week), DATEWEEK(Input with DATE, WEEK, date and week) DATEWEEK s None None None None None Faulty Manageme nt Configuratio n Manageme nt Interval Type 0~3 NOTSUPPORT(Not Support), Enumeration INNER(Inner), Type OUTER(Outer) 0~3 None NOTSUPPORT, INNER, OUTER None MRFD210304 MRFD210301 Enumeration CLOSE(Close), Type OPEN(Open) JAN(January), FEB(February), MAR(March), Enumeration APR(April), MAY(May), Type JUN(June), JUL(July), CLOSE, OPEN JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC None None WRFD040100 MRFD210301 MRFD210301 Flow Control Interval Type 2~2000 Configuratio n Manageme nt Interval Type 0~27 Configuratio n Manageme nt Interval Type 0~3,8~27 2~2000 None 0~27 None 0~3, 8~27 None None None 0,2,4,8,10,12,14,16,18, 0, 2, 4, 8, 10, 12, 14, 16, Interval Type 20,22,24,26 18, 20, 22, 24, 26 None GBFD118602 A over IP 0,2,4,8,10,12,14,16,18, 0, 2, 4, 8, 10, 12, 14, 16, Interval Type 20,22,24,26 18, 20, 22, 24, 26 None None None Interval Type 0~5,8~27 0~5, 8~27 None None None Interval Type 0~5,8~27 0~5, 8~27 None GBFD111203 O&M of BSC Interval Type 0~27 0~27 None MRFD210304 Faulty Manageme nt Interval Type 0~27 Faulty Manageme nt Interval Type 0~27 0~27 None MRFD210304 0~27 None None None Interval Type 0~5,8~27 0~5, 8~27 None None MRFD210301 0,2,4,8,10,12,14,16,18, 0, 2, 4, 8, 10, 12, 14, 16, None Interval Type 20,22,24,26 18, 20, 22, 24, 26 Configuratio n Manageme nt Interval Type 0~27 0~27 None None MRFD211402 MBSC Load Balancing Interval Type 0~27 {0~27} None GBFD111202 GBFD118609 MRFD210301 O&M of BTS Interval Type 0~23 0~23 IP Fault Detection Based on BFD Interval Type 0~23 0~23 Configuratio n Manageme 0,2,4,8,10,12,14,16,18, 0, 2, 4, 8, 10, 12, 14, 16, nt Interval Type 20,22,24,26 18, 20, 22, 24, 26 None None None GBFD111203 O&M of BSC Interval Type 0~27 0~27 None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 MRFD210301 O&M of BTS Interval Type Configuratio n Manageme Enumeration nt Type GBFD111202 O&M of BTS Enumeration Type GBFD111202 O&M of BTS Enumeration Type GBFD111202 O&M of BTS Enumeration Type GBFD111202 O&M of BTS Enumeration Type GBFD111202 O&M of BTS Enumeration Type 0~27 NOCOMB(No Combination), PBT(PBT), WBANDCOMB(Wideb and Combination), SGL_ANTENNA(Singl e Feeder[1TX + 1RX]), SGLDOUBLE_ANTEN NA(Single Feeder[1TX + 2RX]), SGL_ANTENNA(Singl e Feeder[1TX + 1RX]), SGLDOUBLE_ANTEN NA(Single Feeder[1TX + 2RX]), SGL_ANTENNA(Singl e Feeder[1TX + 1RX]), SGLDOUBLE_ANTEN NA(Single Feeder[1TX + 2RX]), SGL_ANTENNA(Singl e Feeder[1TX + 1RX]), SGLDOUBLE_ANTEN NA(Single Feeder[1TX + 2RX]), SGL_ANTENNA(Singl e Feeder[1TX + 1RX]), DOUBLESINGLE_ANT ENNA(Double Feeder[1TX + 1RX]), 0~27 NOCOMB, PBT, WBANDCOMB, DIVERSITY, DDIVERSITY, DPBT, DTIC, NONE SGL_ANTENNA, SGLDOUBLE_ANTENNA, DOUBLE_ANTENNA, DOUBLEFOUR_ANTENN A, SGL_ANTENNA, SGLDOUBLE_ANTENNA, DOUBLE_ANTENNA, DOUBLEFOUR_ANTENN A, SGL_ANTENNA, SGLDOUBLE_ANTENNA, DOUBLE_ANTENNA, DOUBLEFOUR_ANTENN A, SGL_ANTENNA, SGLDOUBLE_ANTENNA, DOUBLE_ANTENNA, DOUBLEFOUR_ANTENN A, SGL_ANTENNA, DOUBLESINGLE_ANTEN NA, DOUBLEDOUBLE_ANTE NNA None None None None None None None GBFD111203 O&M of BSC Interval Type 1~60 1~60 1~16383(BIT14), 1~65535(BIT16), 1~16777215(BIT24) min GBFD111804 A Interface Protocol Process Interval Type 1~16777215 A Interface BIT14(BIT14), Protocol Enumeration BIT16(BIT16), Process Type BIT24(BIT24) None GBFD111804 BIT14, BIT16, BIT24 None GBFD111804 A Interface Protocol Process String Type None 1~11 characters None GBFD111203 O&M of BSC Interval Type 0~65535 0~65535 None GBFD111804 GBFD111003 MRFD210304 MRFD210304 A Interface WNF(Whole Number Protocol Enumeration Format), DNF(Divided Process Type Number Format) Radio L11_FORBID, Common L12_FORBID, Channel L13_FORBID, Manageme L14_FORBID, nt Bit Field Type L15_FORBID ET_DISABLE0, ET_DISABLE1, Faulty SMDISABLE, Manageme WIDISABLE, nt Bit Field Type GMDISABLE, SMDISABLE, WIDISABLE, Faulty GMDISABLE, Manageme ARRESTER1, nt Bit Field Type ARRESTER2 A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) A Interface Protocol Enumeration Process Type NO(No), YES(Yes) PSMODE(Protocol Group Call Standard Mode), Reliability Enumeration VGCSMODE(VGCS Enhancing Type Mode) PSMODE(Protocol Group Call Standard Mode), Reliability Enumeration VGCSMODE(VGCS Enhancing Type Mode) WNF, DNF L11_FORBID, L12_FORBID, L13_FORBID, L14_FORBID, L15_FORBID ET_DISABLE0, ET_DISABLE1, SMDISABLE, WIDISABLE, GMDISABLE, ARRESTER1, SMDISABLE, WIDISABLE, GMDISABLE, ARRESTER1, ARRESTER2 None None None None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD111804 NO, YES None GBFD510309 PSMODE, VGCSMODE None GBFD510309 PSMODE, VGCSMODE None GBFD510309 Group Call Reliability Enhancing Enumeration Type FR(FR), EFR(EFR) FR, EFR None None GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD114802 GBFD113601 None HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Discontinuo us Reception (DRX) Short Message Service Cell Broadcast (TS23) Enumeration 1000M(1000M), Type AUTO(AUTO) 1000M, AUTO None Interval Type 0~63 0~63 dB Interval Type 0~255 0~255 s Enumeration Type NO(NO), YES(YES) NOTSPPRTBC(NotSu pport CB), SPPRTSTANDARD(S Enumeration upportStandard CB), Type SPPRTSIMPLE(Suppo NO, YES NOTSPPRTBC, SPPRTSTANDARD, SPPRTSIMPLE None None MRFD211402 MBSC Load Enumeration NO(No Support), Balancing Type YES(Support) NO, YES None MRFD211402 MBSC Load Enumeration NO(No Support), Balancing Type YES(Support) UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) NO, YES None GBFD119502 PS Handover UNSUPPORT, SUPPORT None GBFD119502 GBFD116301 GBFD510301 PS Handover Network Assisted Cell Change (NACC) Public Voice Group Call Service UNSUPPORT, SUPPORT None Enumeration Type NO(NO), YES(YES) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114101 GPRS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114101 GPRS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114101 GPRS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD114101 GPRS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD118701 RAN Sharing Enumeration Type NO(No), YES(Yes) UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) NO, YES None GBFD510805 Latency Reduction UNSUPPORT, SUPPORT None GBFD118701 RAN Sharing Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111203 O&M of BSC Enumeration YES(Support), NO(Not Type Support) YES, NO None GBFD111804 A Interface Protocol Process Interval Type 0~4 SUPPORT(Support), Enumeration NOT_SUPPORT(Not Type Support) SUPPORT(Support), Enumeration NOT_SUPPORT(Not Type Support) SUPPORT~1||(支持SR AN)$$(Support SRAN)** Enumeration NOT_SUPPORT(Supp Type ort SRAN)** 0~4 None GBFD111202 O&M of BTS SUPPORT, NOT_SUPPORT None GBFD111202 O&M of BTS SUPPORT, NOT_SUPPORT None GBFD111202 O&M of BTS SUPPORT, NOT_SUPPORT None GBFD110601 GBFD510501 MRFD210301 MRFD210301 MRFD210301 MRFD210301 HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 0~2047 0~2047 None String Type None 1~64 characters None Interval Type 0~2047 0~2047 None String Type None 1~64 characters None Interval Type 0~65535 0~65535 None GBFD111203 O&M of BSC String Type None 1~100 characters None MRFD210502 BSC/RNC Clock Interval Type 1~4 1~4 None MRFD210502 GBFD110601 GBFD510501 GBFD118609 MRFD210301 MRFD210301 BSC/RNC Clock HUAWEI I Handover HUAWEI II Handover IP Fault Detection Based on BFD Configuratio n Manageme nt Configuratio n Manageme nt Interval Type 1~4 1~4 HOALGORITHM1(Han dover algorithm I), Enumeration HOALGORITHM2(Han HOALGORITHM1, Type dover algorithm II) HOALGORITHM2 None None IP Address Type None 0.0.0.0~255.255.255.255 None Interval Type 1~65533,65535 1~65533, 65535 None String Type None 1~3 characters None None MRFD210301 None Interval Type 1~1000 Configuratio n Manageme nt String Type None 1~1000 None 1~3 characters None None None MRFD210502 BSC/RNC Clock None MRFD210301 MRFD210301 None Configuratio n Manageme nt Interval Type 0~11 Configuratio n Manageme nt Interval Type 1~11 Interval Type 0~335 BITS1-2MHZ(2MHZ Building Integrated Timing Supply system Enumeration 1), BITS2Type 2MHZ(2MHZ Building TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, Bit Field Type TS15, TS16, TS17, 0~335 None BITS1-2MHZ, BITS22MHZ, BITS1-2MBPS, BITS2-2MBPS, GPS, 8KHZ, LINE1_8KHZ, LINE2_8KHZ, BITS1- TS5, None TS1, TS2, TS3, TS4, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None 0~11 None 1~11 None None None Interval Type 0~11 0~11 None None None Interval Type 0~11 0~11 None GBFD118602 A over IP Interval Type 0~11 0~11 None None None Interval Type 0~11 0~11 None None None Interval Type 0~11 0~11 None MRFD210304 Faulty Manageme nt Interval Type 0~11 0~11 None None MRFD210301 None Interval Type 0~11 Configuratio n Manageme nt Interval Type 0~11 0~11 None 0~11 None MRFD211402 MBSC Load Balancing Interval Type 0~11 0~11 None GBFD111202 GBFD118609 MRFD210301 O&M of BTS Interval Type 0~254 IP Fault Detection Based on BFD Interval Type 0~254 Configuratio n Manageme nt Interval Type 0~11 0~254 None 0~254 None 0~11 None GBFD111203 O&M of BSC Interval Type 0~11 0~11 None GBFD111202 O&M of BTS Interval Type 0~254 0~254 None GBFD111202 O&M of BTS Interval Type 0~11 0~11 None GBFD111203 O&M of BSC Interval Type 0~11 0~11 None GBFD111203 O&M of BSC Interval Type 0~11 0~11 None MRFD210301 Configuratio n Manageme nt String Type None 1~249 characters None GBFD111202 O&M of BTS Interval Type 0~5 0~5 None MRFD210502 BSC/RNC Clock Enumeration Type MPS, EPS, TCS MPS, EPS, TCS None MRFD210304 Faulty Manageme Enumeration DES(Descent), nt Type ASC(Ascent) DES, ASC None GBFD118603 Gb over IP Interval Type 0~255 0~255 None GBFD118603 Gb over IP GBFD111202 O&M of BTS GBFD118605 GBFD110601 GBFD510501 IP QOS HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 Interval Type 0~255 GSM_PRIOR(GSM Traffic Prior), Enumeration UMTS_PRIOR(UMTS Type Traffic Prior) Voice), CSVOICE(CS CSDATA(CS Data), PSHIGHPRI(PS High Enumeration PRI), PSLOWPRI(PS Type Low PRI) 0~255 None GSM_PRIOR, UMTS_PRIOR None CSVOICE, CSDATA, PSHIGHPRI, PSLOWPRI None 0~63 dB MRFD210304 Faulty Manageme nt Interval Type 20~99 Faulty Manageme nt Interval Type 30~100 Faulty Manageme nt Interval Type 20~99 20~99 per cent MRFD210304 30~100 per cent MRFD210304 20~99 per cent MRFD210304 GBFD110601 GBFD510501 GBFD110601 GBFD510501 MRFD210301 Faulty Manageme nt HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt Interval Type 30~100 30~100 per cent Interval Type 1~32 TCH:480~15360, step:480; SDCCH:470~15040, step:470 ms TCH:480~15360, step:480; SDCCH:470~15040, step:470 ms Interval Type 1~32 Interval Type 0~7 0~7 None MRFD211402 MBSC Load Balancing Interval Type 0~7 Faulty Manageme nt HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt O&M of BSC Security Manageme nt 0~7 None MRFD210304 GBFD110601 GBFD510501 Interval Type 1~2147483646 1~2147483646 None Interval Type 0~63 0~63 dB MRFD210301 GBFD111203 MRFD210305 Compound Type HOUR, MIN, SEC HOUR, MIN, SEC None Compound Type year, month, date, hour, min, sec 2000-1-1 00:00:00~203712-31 23:59:59 None GBFD111203 GBFD111203 MRFD210305 O&M of BSC of O&M BSC Security Manageme nt Compound Type hour, min 00:00~23:59 None Compound Type year, month, date, hour, min, sec 2000-1-1 00:00:00~203712-31 23:59:59 None MRFD210304 Faulty Manageme Compound nt Type hour, min, sec 00:00:00~23:59:59 None MRFD210304 Faulty Manageme Compound nt Type Simplified Cell Broadcast hour, min, sec 00:00:00~23:59:59 None GBFD113602 Compound Type year, month, day, hour, 1970-1-1 00:00:00~2538min, sec 12-31 23:59:59 None MRFD210304 GBFD113701 Faulty Manageme nt Frequency Interval Type 1~65535 Hopping (RF hopping, Enumeration baseband Type NO(No), YES(Yes) 1~65535 None NO, YES None GBFD111705 GBFD111803 GSM Flow Enumeration Control Type NO(No), YES(Yes) A Interface Circuit Manageme nt Interval Type 0~65535 NO, YES None 0~65535 None GBFD111203 GBFD111602 O&M of BSC Interval Type 0~65535 TRX Power Amplifier Intelligent Shutdown Interval Type 1~31 0~65535 None 1~31 None GBFD111202 GBFD111602 O&M of BTS Interval Type TRX Power Amplifier Intelligent Enumeration Shutdown Type -990~400 FEB(Feb.), JAN(Jan.), MAR(Mar.), APR(Apr.), MAY(May), JUN(Jun.), JUL(Jul.), AUG(Aug.), SEP(Sep), OCT(Oct.), -99.0~40.0 (step: 0.1) JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC degree Celsius None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Group Call Reliability Enhancing TRX Power Amplifier Intelligent Shutdown Ater Interface 4:1 Multiplexing A Interface Circuit Manageme nt Enumeration Type 0(0), 2(2), 4(4), 6(6) 0, 2, 4, 6 None GBFD510309 Interval Type 60~600 60~600 s GBFD111602 Compound Type hour, min 00:00~23:59 None GBFD111801 Interval Type 8~255 8~255 None GBFD111803 Interval Type 1~31 1~31, step:8 None GBFD111202 O&M of BTS Interval Type 1~31 1~31 None GBFD111202 O&M of BTS Enumeration DISABLED(Disabled), Type ENABLED(Enabled) DISABLED, ENABLED None GBFD111202 GBFD111803 O&M of Enumeration DISABLED(Disabled), BTS Type ENABLED(Enabled) DISABLED, ENABLED A Interface Circuit Manageme nt Interval Type 0~65535 0~65535 None None GBFD111202 GBFD111203 MRFD210305 GBFD510901 O&M of BTS of O&M BSC Security Manageme nt 2G/3G Neighboring Cell Automatic Optimizatio Interval Type 0~62 0~62 None Compound Type year, month, day 2000-1-1~2037-12-31 None Interval Type 1~32 1~32 None GBFD111804 A Interface Protocol Enumeration Process Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Compound Type hour, min, sec 00:00:00~23:59:59 None GBFD115821 GBFD113521 Enumeration EICC Type NO(No), YES(Yes) Encrypted Network Manageme Enumeration nt Type OFF(Off), ON(On) Group Call Reliability Enhancing NO, YES None OFF, ON None GBFD510309 Interval Type 60~300 60~300 s GBFD111804 A Interface Protocol Enumeration Process Type OFF(OFF), ON(ON) SemiPermanent Connection Interval Type 0~23 Cell Frequency Scan OFF, ON None GBFD114701 0~23 None GBFD112401 Compound Type hour, min, sec HOUR{0~23}, MIN{0~59}, SEC{0~59} None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111202 O&M of BTS Interval Type 0~254 0~254 None GBFD111202 GBFD111203 MRFD210305 O&M of BTS of Interval Type 0~7 O&M BSC Security Manageme Compound nt Type hour, min, sec 0~7 None 00:00:00~23:59:59 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Interval Type 1~31 BTS30(BTS30), BTS312(BTS312), BTS3001C(BTS3001C Enumeration ), Type BTS3001CP(BTS3001 1~31 BTS312, BTS30, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, None None GBFD113726 TC Pool Interval Type 1~15 1~15 None GBFD113726 TC Pool Interval Type 1~15 1~15 None GBFD111202 GBFD118604 GBFD118610 O&M of BTS MUX String Type None Abis UDP MUX for A Transmissio n Interval Type 16~1023 1~64 characters None 16~1023 byte GBFD118604 Abis MUX Interval Type 16~1023 16~1023 byte GBFD111203 O&M of BSC Interval Type 1~50 1~50 None None None Interval Type 1~124,128~189 1~124, 128~189 None GBFD117301 Flex Abis Enumeration Type NO(No), YES(Yes) NO, YES None GBFD117301 Flex Abis Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111203 O&M of BSC Enumeration Type 0(0), 2(2), 4(4), 6(6) 0, 2, 4, 6 None GBFD111202 GBFD111803 O&M of BTS Interval Type 0~65535 A Interface Circuit Manageme Enumeration nt Type NO(No), YES(Yes) 0~65535 None NO, YES None MRFD210502 BSC/RNC Clock Enumeration Type NO(NO), YES(YES) NO, YES None MRFD210502 BSC/RNC Clock Simplified Cell Broadcast MS High multislot classes Enumeration Type NO(NO), YES(YES) NO, YES None GBFD113602 Enumeration Type NO(No), YES(Yes) NOTSUPPORT(Not Enumeration Support), Type SUPPORT(Support) UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) NO, YES None GBFD119402 NOTSUPPORT, SUPPORT None GBFD114151 GBFD119401 DTM Extended Dynamic NOTSUPPORT(Not Allocation(E Enumeration Support), DA) Type SUPPORT(Support) UNSUPPORT(Not Enumeration Support), Type SUPPORT(Support) UNSUPPORT, SUPPORT None NOTSUPPORT, SUPPORT None GBFD114151 DTM UNSUPPORT, SUPPORT None GBFD117702 BTS Local Switch Enumeration Type NO(No), YES(Yes) NO, YES None GBFD115701 MRFD211404 Enumeration TFO Type MBSC Handover based on Load Enumeration Enhanceme Type NO(Not Support), YES(Support) NO, YES None NO(No Support), YES(Support) NO, YES None GBFD119110 Access T_12(12), T_15(15), T_20(20), T_30(30), T_41(41), T_55(55), T_12, T_15, T_20, T_30, Enumeration T_76(76), T_109(109), T_41, T_55, T_76, T_109, Type T_163(163), T_163, T_217 None GBFD118603 Gb over IP IP Address Type None 0.0.0.0~255.255.255.255 None GBFD118603 Gb over IP Interval Type 0~65535 0~65535 None MRFD210304 Faulty Manageme Enumeration CLOSE(CLOSE), nt Type OPEN(OPEN) CLOSE, OPEN None GBFD111203 O&M of BSC Enumeration Type ON, OFF ON, OFF None GBFD111203 O&M of BSC Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111202 MRFD210301 MRFD210301 O&M of BTS Configuratio n Manageme nt Configuratio n Manageme nt Enumeration CLOSE(Close), Type OPEN(Open) SUN(Sunday), MON(Monday), TUE(Tuesday), Enumeration WED(Wednesday), Type THU(Thursday), CLOSE, OPEN None SUN, MON, TUE, WED, THU, FRI, SAT None Enumeration Type CLOSE, OPEN CLOSE, OPEN None None None License Manageme nt IP Fault Detection Based on BFD Enumeration Type ON(ON), OFF(OFF) ON, OFF None MRFD210403 Enumeration Type ON(ON), OFF(OFF) ON, OFF None GBFD118609 Enumeration BFD_OFF(OFF), Type BFD_ON(ON) BFD_OFF, BFD_ON None GBFD111202 GBFD115501 GBFD115502 GBFD- O&M of BTS AMR FR AMR HR TFO Enumeration Type NO(NO), YES(YES) NO, YES None Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD118602 A over IP Enumeration Type NO(NO), YES(YES) NO, YES None GBFD118602 A over IP Interval Type 1~254 1~254 None GBFD111203 O&M of BSC Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111203 O&M of BSC Interval Type 0~4294967295 0~4294967295 None GBFD111203 O&M of BSC Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111203 O&M of BSC Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111203 O&M of BSC Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111203 O&M of BSC Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111203 O&M of BSC Enumeration Type OFF(OFF), ON(ON) OFF, ON None GBFD111203 O&M of BSC Interval Type 0~4294967295 0~4294967295 None GBFD111203 O&M of BSC Interval Type 0~4294967295 0~4294967295 None GBFD111203 O&M of BSC Interval Type 0~4294967295 0~4294967295 None GBFD111202 GBFD111203 MRFD210305 MRFD210301 O&M of BTS of O&M BSC Security Manageme nt Configuratio n Manageme nt SoftSynchroniz ed Network GSM/TDSCDMA Interoperabi lity IBCA (Interferenc e Based Channel Allocation) BSC/RNC Software Manageme nt Interval Type 3~5 3~5 None Enumeration Type OFF(Off), ON(On) FIRST(First), SECOND(Second), THIRD(Third), Enumeration FOURTH(Fourth), Type LAST(Last) OFF, ON None FIRST, SECOND, THIRD, FOURTH, LAST None GBFD118201 Interval Type 0~2500 0~2500 None GBFD114302 GBFD117002 SyncCase1(Sync case Enumeration 1), SyncCase2(Sync Type case 2) SyncCase1, SyncCase2 AISS(Air Interface Software Sync), Enumeration GPS(GPS Type Synchronization) AISS, GPS None None MRFD210401 GBFD118606 Clock over IP Enumeration Type TRUE, FALSE TRUE, FALSE CONSYN(Consecutive Synchronizing), Enumeration INTERSYN(Intermitten Type t Synchronizing) CONSYN, INTERSYN None None GBFD118606 Clock over IP Interval Type 1~7 1~7 d GBFD118606 Clock over IP Interval Type 0~23 0~23 h GBFD118606 MRFD210301 MRFD210301 GBFD110601 GBFD510501 MRFD210301 GBFD510301 MRFD210301 MRFD210301 Clock over IP Configuratio n Manageme nt Configuratio n Manageme nt HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt Public Voice Group Call Service Configuratio n Manageme nt Configuratio n Manageme nt Gb Interface Function Interval Type 0~59 0~59 min String Type None 1~250 characters None String Type None 1~250 characters None Interval Type 0,8~11 0, 8~11 None String Type None 1~250 characters None Enumeration Type NO(No), YES(Yes) NO, YES None String Type None 1~250 characters None String Type None 1~250 characters None GBFD119001 Interval Type 1000~30000 1000~30000 ms GBFD118601 Abis over IP Interval Type 1~60 A Interface Protocol Process Interval Type 30000~60000 A Interface Protocol Process Interval Type 800~1500 1~60 s GBFD111804 30000~60000 ms GBFD111804 800~1500 ms GBFD111804 A Interface Protocol Process Interval Type 800~1500 A Interface Protocol Process Interval Type 2000~3000 A Interface Protocol Process Interval Type 800~1500 A Interface Protocol Process Interval Type 800~1200 Gb Interface Function 800~1500 ms GBFD111804 2000~3000 ms GBFD111804 800~1500 ms GBFD111804 800~1200 ms GBFD119001 Interval Type 1000~120000 1000~120000 ms GBFD118601 Abis over IP Interval Type 1~60 1~60 s GBFD117801 Ring Topology Interval Type 6~240 60~2400 (step: 10) ms GBFD111002 Radio Link Manageme nt Interval Type 1~255 Radio Link Manageme nt Interval Type 1~255 Radio Link Manageme nt Interval Type 1~255 Radio Link Manageme nt Interval Type 1~255 Radio Link Manageme nt Interval Type 1~255 5~1275, step: 5 ms GBFD111002 5~1275, step: 5 ms GBFD111002 10~2550, step: 10 ms GBFD111002 10~2550, step: 10 ms GBFD111002 10~2550, step: 10 ms GBFD111002 Radio Link Manageme nt Interval Type 1~255 Radio Link Manageme nt Interval Type 1~255 Fast Ring Network Switch 5~1275, step: 5 ms GBFD111002 5~1275, step: 5 ms GBFD117802 Interval Type 1~10 1~10 s GBFD111804 A Interface Protocol Process Interval Type 180000~360000 A Interface Protocol Process Interval Type 180000~360000 A Interface Protocol Process Interval Type 1400~2000 Gb Interface Function 180000~360000 ms GBFD111804 180000~360000 ms GBFD111804 1400~2000 ms GBFD119001 Interval Type 1000~10000 1000~10000 ms GBFD118601 GBFD110601 GBFD510501 GBFD510302 GBFD114101 GBFD114101 Abis over IP Interval Type 1~60 HUAWEI I Handover HUAWEI II Handover Interval Type 0~255 Public Voice Broadcast Service Interval Type 1~255 500ms(500ms), 1000ms(1000ms), 1500ms(1500ms), Enumeration 2000ms(2000ms), GPRS Type 2500ms(2500ms), 0ms(0ms), 80ms(80ms), 120ms(120ms), Enumeration 160ms(160ms), GPRS Type 200ms(200ms), 1~60 s 0~2550, step:10 ms 1~255 s 500ms, 1000ms, 1500ms, 2000ms, 2500ms, 3000ms, 3500ms, 4000ms ms 0ms, 80ms, 120ms, 160ms, 200ms, 500ms, 1000ms, 1500ms ms GBFD110301 Location Updating Interval Type 0~255 0~1530, step: 6 min GBFD510002 Gb Over FR Interval Type 5~30 A Interface Protocol Process Interval Type 800~1200 Gb Interface Function 5~30 s GBFD111804 800~1200 ms GBFD119001 Interval Type 1000~10000 1000~10000 ms GBFD111804 A Interface Protocol Process Interval Type 800~1200 Gb Interface Function 800~1200 ms GBFD119001 Interval Type 1000~30000 1000~30000 ms GBFD111804 A Interface Protocol Process Interval Type 800~1200 Gb Interface Function Gb Interface Function 800~1200 ms GBFD119001 Interval Type 1000~10000 1000~10000 ms GBFD119001 Interval Type 1000~10000 1000~10000 ms GBFD111804 GBFD110601 GBFD510501 A Interface Protocol Process Interval Type 800~1200 HUAWEI I Handover HUAWEI II Handover Interval Type 1~31 800~1200 ms TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms GBFD113201 Concentric Cell Enumeration Type NO(No), YES(Yes) NO, YES None GBFD110601 GBFD510501 HUAWEI I Handover HUAWEI II Enumeration Handover Type NO(No), YES(Yes) NO, YES None GBFD113201 Concentric Cell Interval Type 0~255 0~255 bit GBFD510501 GBFD110601 GBFD510501 HUAWEI II Handover Interval Type 1~16 HUAWEI I Handover HUAWEI II Handover Interval Type 0~255 Talker Identificatio n Interval Type 0~255 HUAWEI I Handover HUAWEI II Handover Interval Type 1~31 SoftSynchroniz ed Network Interval Type 0~7 0.5~8, step:0.5 s 0~255 bit GBFD510306 GBFD110601 GBFD510501 0~255 s TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms GBFD118201 0~7 None GBFD510501 HUAWEI II Handover Interval Type 1~16 0.5~0.8, step:0.5 s GBFD113201 Concentric Cell Interval Type 0~255 0~255 bit GBFD119115 Power Control Interval Type 0~25 0~25 None GBFD119115 Power Control Interval Type 0~25 0~25 None GBFD111203 O&M of BSC Interval Type 1~12 1~12 None GBFD111202 O&M of BTS Interval Type 1~12 1~12 None GBFD113728 OML Backup Interval Type 30~300 30~300 s GBFD117801 Ring Topology Interval Type 60~300 60~300 s GBFD111804 A Interface Protocol Process Interval Type 1~254 Gb Interface Function 1~254 None GBFD119001 Interval Type 1000~10000 1000~10000 ms GBFD111202 O&M of BTS Interval Type 0~500 0~500 mV GBFD111203 GBFD113402 GBFD111005 GBFD111004 GBFD111004 GBFD111004 O&M of BSC Dynamic Adjustment Between FR and HR Enhanced Channel Assignment Algorithm Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Enumeration Type OFF(Off), ON(On) OFF, ON None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~100 0~100 per cent Interval Type 0~1000 0~1000 per mill Interval Type 0~63 0~63 dB Interval Type 0~70 0~70 None GBFD111004 GBFD111004 GBFD111004 GBFD110601 GBFD510501 GBFD117601 GBFD111005 GBFD113521 GBFD113521 Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt Radio Dedicated Channel Manageme nt HUAWEI I Handover HUAWEI II Handover HUAWEI III Power Control Algorithm Enhanced Channel Assignment Algorithm Encrypted Network Manageme nt Encrypted Network Manageme nt Interval Type 0~1000 0~1000 per mill Interval Type 0~63 0~63 dB Interval Type 0~70 0~70 None Interval Type 0~60 0~60 s Interval Type 0~10 0~10 None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 1~600 1~600 s Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD113201 Concentric Cell Interval Type 0~100 0~100 per cent GBFD113201 Concentric Cell Interval Type 0~100 0~100 per cent GBFD111804 GBFD111804 A Interface Protocol Process Interval Type 1~15 SEPERATE_PRINCIP AL(Principal BSC), A Interface SEPERATE_SUBORD Protocol Enumeration INATE(Subordinate Process Type BSC), 1~15 SEPERATE_PRINCIPAL, None SEPERATE_SUBORDINA TE, TOGETHER, SEPERATE_BSC_INTER FACE None GBFD111203 O&M of BSC Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None GBFD111202 O&M of BTS Interval Type 0~62 0~62 None None None Interval Type 0~335 0~335 None GBFD113726 TC Pool Interval Type 0~4095 0~4095 None None None Interval Type 0~5,8~27 0~5, 8~27 None None MRFD210301 GBFD114302 MRFD210301 GBFD114302 GBFD114302 GBFD114302 None Configuratio n Manageme nt GSM/TDSCDMA Interoperabi lity Configuratio n Manageme nt GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity Interval Type 0~11 0~11 None Enumeration GTC(GTC), Type UTC(UTC), ITC(ITC) GTC, UTC, ITC None Enumeration AUTO(Auto), Type Manual(Manual) AUTO, Manual None Enumeration AUTO(Auto), Type Manual(Manual) AUTO, Manual None Interval Type 0~7 0~42, step: 6 dB Interval Type 0~15 Negative infinity, -28~28, step: 4 dB Interval Type 0~7 0~36, Positive infinity, step: 6 dB GBFD114302 GBFD114302 GBFD114302 GBFD114302 GBFD114302 GBFD114302 MRFD210301 GBFD114302 GBFD114302 GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity Configuratio n Manageme nt GSM/TDSCDMA Interoperabi lity GSM/TDSCDMA Interoperabi lity Interval Type 0~1 0~1 None Interval Type 0~16383 0~16383 None Enumeration Type NO(No), YES(Yes) NO, YES None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~63 0~63 None Interval Type 0~127 0~127 None Interval Type 0~127 0~127 None Enumeration Type NO(No), YES(Yes) NO, YES None Interval Type 0~1 0~1 None GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD118605 IP QOS Interval Type 0~100 0~100 per cent GBFD111203 O&M of BSC Interval Type 0~5 0~5 None GBFD111203 O&M of BSC Interval Type 0~5 0~5 None GBFD111203 O&M of BSC Interval Type 0~127 0~127 None MRFD210304 Faulty Manageme Enumeration CLOSE(Close), nt Type OPEN(Open) Faulty Manageme nt String Type Faulty Manageme nt String Type CLOSE, OPEN None MRFD210304 None 1~9 characters degree Celsius MRFD210304 None 1~9 characters degree Celsius MRFD210304 Faulty Manageme nt Interval Type -500~1000 Faulty Manageme nt Interval Type -490~1000 Faulty Manageme nt Interval Type -500~1000 Faulty Manageme nt Interval Type -500~990 -50.0~100.0 (step: 0.1) degree Celsius MRFD210304 -49.0~100.0 (step: 0.1) degree Celsius MRFD210304 -50.0~100.0 (step: 0.1) degree Celsius MRFD210304 -50.0~99.0 (step: 0.1) degree Celsius GBFD111202 MRFD210301 MRFD210301 O&M of BTS Interval Type 0~5000 Configuratio n Manageme nt String Type None Configuratio n Manageme nt Interval Type 1~65535 0.0~500.0 (step: 0.1) mV 1~64 characters None 1~65535 None MRFD210301 MRFD210301 Configuratio n Manageme nt Interval Type 32768~65535 Configuratio n Manageme nt String Type None 32768~65535 None 1~64 characters None GBFD111202 O&M of BTS Interval Type 50~70 50~70 degree Celsius GBFD111202 O&M of BTS Interval Type -400~0 -40.0~0.0 (step: 0.1) degree Celsius GBFD111202 O&M of BTS Interval Type -400~0 -40.0~0.0 (step: 0.1) degree Celsius GBFD111101 System Information Enumeration Sending Type NO(No), YES(Yes) Gb Interface Function Simplified Cell Broadcast NO, YES None GBFD119001 Interval Type 1~255 GBFD113602 Any Type None 1~255 characters(GB2312, s 1~615 KOI8-R, KOI8-U, KOI8, WINDOWS-1251, ASMO_449, WINDOWS1256, WINDOWS-874, None GBFD115701 TFO Enumeration Type OFF(Off), ON(On) OFF, ON None GBFD111207 MRFD210301 BTS Test Function Interval Type 0~1023 Configuratio n Manageme nt Interval Type 0~65535 0~1023 h 0~65535 None GBFD111203 O&M of BSC ACTIVE(Active OMU), Enumeration STANDBY(Standby Type OMU) ACTIVE, STANDBY None None None Interval Type 0~255 0~255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None IP Address Type None 0.0.0.0~255.255.255.255 None None None Interval Type 0~5,8~27 0~5, 8~27 None None None Interval Type 0~11 0~11 None GBFD114101 GPRS Interval Type 5000~60000 5000~60000 ms GBFD111202 O&M of BTS Interval Type 220~280 220~280 V GBFD111202 O&M of BTS Interval Type 220~280 220~280 V GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP Interval Type 1~10 1~10 None GBFD119902 QoS ARP&THP GBFD118605 IP QOS Interval Type 1~10 1~10 PERCENTAGE(Perce ntage), Enumeration BANDWIDTH(Band PERCENTAGE, Type Width) BANDWIDTH None None GBFD119701 GBFD118001 GBFD118001 GBFD118001 GBFD118001 GBFD118001 SGSN Pool BCCH Dense Frequency Multiplexing BCCH Dense Frequency Multiplexing BCCH Dense Frequency Multiplexing BCCH Dense Frequency Multiplexing BCCH Dense Frequency Multiplexing Interval Type 1~15 1~15 min Interval Type 0~63 0~63 dB Interval Type 0~7 0~7 None Interval Type 1~32 0.5~16, step:0.5 s Interval Type 0~100 0~100 per cent Interval Type 1~32 0.5~16, step:0.5 s GBFD118001 GBFD118001 GBFD117002 BCCH Dense Frequency Multiplexing BCCH Dense Frequency Multiplexing IBCA (Interferenc e Based Channel Allocation) Interval Type 0~7 0~7 None Enumeration Type OFF(Off), ON(On) OFF, ON None Interval Type 0~63 0~63 dB GBFD117401 GBFD111203 MRFD210305 MSC Pool Interval Type 3~15 O&M of BSC Security Manageme Enumeration NOLIMIT(No Limit), nt Type LIMIT(Limit) 3~15 s NOLIMIT, LIMIT None GBFD111203 O&M of BSC Compound Type HOUR, MIN, SEC 00:00:00~23:59:59 None GBFD112401 GBFD110601 GBFD510501 GBFD110601 GBFD510501 Cell Frequency Scan Interval Type 0,5~1440 HUAWEI I Handover HUAWEI II Handover Interval Type 0~255 HUAWEI I Handover HUAWEI II Handover Interval Type 0~255 0, 5~1440 min 0~255 s 0~255 s GBFD113201 Concentric Cell Interval Type 0~255 0~255 s None None Interval Type 200~10000 200~10000 ms None None Interval Type 1~65535 1~65535 ms None None Interval Type 1~3 1~3 s None None Interval Type 1~10 1~10 s GBFD118604 GBFD110601 GBFD510501 Abis MUX Interval Type 1~20 HUAWEI I Handover HUAWEI II Handover Interval Type 0~255 1~20 (step: 1) ms 0~255 s None GBFD111606 GBFD110601 GBFD510501 None Power Optimizatio n Based on Channel Type HUAWEI I Handover HUAWEI II Handover Interval Type 1~1024 1~1024 None Enumeration NO(No), YES(Yes), Type NULL(Null) NO, YES, NULL None Interval Type 0~255 0~255 s GBFD113201 GBFD111005 Concentric Cell Interval Type 10~255 Enhanced Channel Assignment Algorithm Interval Type 1~30 10~255 s 1~30 s GBFD117401 GBFD111203 MRFD210305 MSC Pool Interval Type 1~15 O&M of BSC Security Manageme nt Interval Type 7~365 1~15 min 7~365 d GBFD114101 GPRS Interval Type 0~4294967295 0~4294967295 None GBFD111202 O&M of BTS Interval Type -99~70 -99~70 degree Celsius GBFD111202 O&M of BTS Interval Type -19~5 -19~5 degree Celsius GBFD111202 O&M of BTS Interval Type -99~99 -99~99 degree Celsius GBFD111203 O&M of BSC Compound Type hour, min 00:00~23:59 None GBFD111203 O&M of BSC Compound Type hour, min 00:00~23:59 None GBFD111203 O&M of BSC Compound Type hour, min 00:00~23:59 None GBFD111203 O&M of BSC Compound Type hour, min 00:00~23:59 None GBFD111203 O&M of BSC Compound Type hour, min 00:00~23:59 None GBFD111203 O&M of BSC Compound Type hour, min 00:00~23:59 None GBFD118605 IP QOS Interval Type 14~163 14~163 None None None Interval Type 0~163 0~163 None None None Interval Type 1~120 1~120 min GBFD111207 BTS Test Function Enumeration NON_FDR(NON_FDR Type ), FDR(FDR) NON_FDR, FDR None GBFD110501 Call Control Interval Type 2~4 Faulty Manageme nt Interval Type 0~100 2~4 s MRFD210304 0~100 per cent GBFD111203 O&M of BSC Interval Type 0~4294967295 0~4294967295 None MRFD210304 Faulty Manageme nt Interval Type 0~100 A Interface Protocol Process Interval Type 8000~12000 A Interface Protocol Process Configuratio n Manageme nt Satellite Transmissio n over Ater Interface 0~100 per cent GBFD111804 8000~12000 ms GBFD111804 MRFD210301 GBFD113903 GBFD111203 MRFD210301 O&M of BSC Configuratio n Manageme nt Interval Type -120~-1,1~120 Basic Cell Reselection Interval Type 30000~90000 ABLMSGTYPEPARAS , ACALGOPARAS, ADMCTLPARAS, Enumeration AICH, Type AMRCSQICOUNTPAR TRRS(Terrestrial Transmission), Enumeration SATEL(Satellite Type Transmission) TRRS(Terrestrial Transmission), Enumeration SATEL(Satellite Type Transmission) 30000~90000 ms 0~276 None TRRS, SATEL None TRRS, SATEL None -120~-1, 1~120 min GBFD110402 Interval Type 0~7 0~7 None MRFD211501 MRFD211501 MRFD211501 GBFD111203 IP-Based 2G/3G CoTransmissio n on Base Station Side Interval Type 0~62 IP-Based 2G/3G CoTransmissio n on Base Station Side Interval Type 0~23 IP-Based 2G/3G CoTransmissio n on Base Station Side Interval Type 0~254 NORMAL(TXT FORMAT), O&M of Enumeration FORMAT(BIN BSC Type FORMAT) 0~62 None 0~23 None 0~254 None NORMAL, FORMAT None GBFD111202 GBFD110601 GBFD510501 O&M of BTS Interval Type 0~5 HUAWEI I Handover HUAWEI II Handover Interval Type 1~30 0~5 None 1~30 s WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 Flow Control Interval Type 30~100 30~100 per cent WRFD040100 GBFD119501 Flow Enumeration Control Type ON, OFF Adaptive Adjustment of Uplink and Downlink Interval Type 1~255 ON, OFF None 1~255 None GBFD119501 GBFD118602 GBFD113901 Adaptive Adjustment of Uplink and Downlink Interval Type 1~255 M3UA_OVERRIDE_M OD(Active/Standby Mode), Enumeration M3UA_LOADSHARE_ A over IP Type MOD(Load Sharing TER_TRANS(Terrestri Satellite al Transmission), Transmissio SAT_TRANS(Satellite n over Abis Enumeration Transmission), Interface Type TER_AND_SAT_TRA 1~255 None M3UA_OVERRIDE_MOD, M3UA_LOADSHARE_MO D None TER_TRANS, SAT_TRANS, TER_AND_SAT_TRANS None GBFD111203 O&M of BSC Interval Type 0~27 0~27 None GBFD118605 IP QOS Enumeration Type IP(IP) IP None GBFD118605 IP QOS Enumeration Type IP(IP), HDLC(HDLC) IP, HDLC None GBFD118605 IP QOS Enumeration IP(IP), HDLC(HDLC), Type TDM(TDM) IP, HDLC, TDM None GBFD111202 O&M of BTS Enumeration Type IP, HDLC, TDM IP, HDLC, TDM None GBFD118601 Enumeration Abis over IP Type HDLC, IP HDLC IP None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS GBFD111202 O&M of BTS GBFD114101 GBFD110601 GBFD510501 GPRS HUAWEI I Handover HUAWEI II Handover Interval Type 0~100 Enumeration Type NO(NO), YES(YES) ENABLE(Enable Trace Range Limit), Enumeration DISABLE(Disable Type Trace Range Limit) 5sec(5sec), 10sec(10sec), 15sec(15sec), Enumeration 20sec(20sec), Type 30sec(30sec), NO, YES None ENABLE, DISABLE 5sec, 10sec, 15sec, 20sec, 30sec, 60sec, 120sec, 300sec, no use h s 0~100 None MRFD210103 Link aggregation Interval Type 0~11 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc) None MRFD210103 Link aggregation Interval Type 0~5,8~27 0~5, 8~27 None MRFD210103 Link aggregation Interval Type 0~11 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc) None GBFD111202 O&M of BTS Interval Type 0~163 0~163 None GBFD118605 IP QOS Interval Type 0~199 0~199 None None None Interval Type 0~199 0~199 None None GBFD118611 GBFD118622 None Interval Type 10~199 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~199 10~199 None 0~199 None GBFD118611 GBFD118622 Abis IP over E1/T1 A IP over E1/T1 Interval Type 0~199 0~199 None GBFD118605 IP QOS Interval Type 0~199 0~199 None None None Interval Type 0~199 0~199 None GBFD111202 O&M of BTS Enumeration Type OFF(OFF), ON(ON) OFF, ON None None GBFD118609 None IP Fault Detection Based on BFD Interval Type 0~11 0~11 None Interval Type 0~11 0~11 None GBFD118630 Ethernet OAM GBFD113801 Interval Type 0~11 TRXAid_NotAllow(TRX Aiding Not Allowed), AllowReForbid(Allowed TRX Enumeration & Recover Forbidden), Cooperation Type AllowReImmed(Allowe 0~11 TRXAid_NotAllow, AllowReForbid, AllowReImmed, AllowReCheckRes None None GBFD111207 GBFD113701 MRFD210301 BTS Test Function Frequency Interval Type 5~10 Hopping (RF hopping, baseband Interval Type 0~63,255 Configuratio n Manageme nt Interval Type 0~3071 5~10 s 0~63, 255 None 0~3071 None GBFD510104 Multi-site Cell Interval Type 0~3071 0~3071 None GBFD113703 Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113703 Interval Type 0~3071 0~3071 None GBFD113701 Frequency Hopping (RF hopping, baseband String Type None 1~120 characters None GBFD111207 GBFD113701 MRFD210301 BTS Test Function Frequency Interval Type 0~3071 Hopping (RF hopping, baseband Interval Type 0~63 Configuratio n Manageme nt Interval Type 0~71 0~3071 None 0~63 None 0~71 None GBFD111202 O&M of BTS Interval Type 0~8 0~8 None GBFD111202 O&M of BTS Interval Type 0~7 0~7 None GBFD510104 GBFD111005 GBFD111202 GBFD111801 GBFD111803 None Multi-site Cell Interval Type 0~7 Enhanced Channel Assignment Enumeration Algorithm Type NO(No), YES(Yes) TRX(TRX), TRU(TRU/DTRU), QTRU(QTRU), O&M of Enumeration DRRU(DRRU), BTS Type DRFU(DRFU), Ater Interface 4:1 Multiplexing Interval Type 8~255 A Interface Circuit Manageme nt Interval Type 1~31 TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), Enumeration TS4(Time_slot_4), None Type TS5(Time_slot_5), 0~7 None NO, YES None TRX, TRU, QTRU, DRRU, DRFU, MRRU, MRFU, GRFU, GRRU, BTS3900B, BTS3900E None 8~255 None 1~31,TS2, TS3, TS4, TS5, None TS1, step:8 TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD510002 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, Gb Over FR Bit Field Type TS15, TS16, TS17, 2~4294967294 None GBFD111203 GBFD118611 GBFD118622 GBFD118611 GBFD118622 GBFD118611 GBFD113701 O&M of BSC Interval Type 1~31 TS2, TS3, TS4, TS1, Abis IP over TS5, TS6, TS7, TS8, E1/T1 TS9, TS10, TS11, A IP over TS12, TS13, TS14, E1/T1 Bit Field Type TS15, TS16, TS17, TS1, TS2, TS3, TS4, Abis IP over TS5, TS6, TS7, TS8, E1/T1 TS9, TS10, TS11, A IP over TS12, TS13, TS14, E1/T1 Bit Field Type TS15, TS16, TS17, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, Abis IP over TS12, TS13, TS14, E1/T1 Frequency Bit Field Type TS15, TS16, TS17, Hopping (RF hopping, baseband Interval Type 0~7 1~31 TS2, TS3, TS4, TS5, TS1, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None None None None 0~7 None GBFD114101 GPRS Interval Type 0~512 0~512 None GBFD118201 SoftSynchroniz Enumeration ed Network Type NO(No), YES(Yes) NO, YES None None None Interval Type 0~65535 0~65535 None GBFD111207 BTS Test Function Interval Type 1~144 10~1440 (step: 10) min GBFD114701 SemiPermanent Connection Interval Type 0~127 0~127 None GBFD111203 O&M of BSC String Type None 1~50 characters None MRFD210301 MRFD211501 Configuratio n Manageme nt Bit Field Type IP-Based 2G/3G CoTransmissio n on Base Station Side Bit Field Type TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, None GBFD111202 O&M of BTS Interval Type 0~23 0~23 None GBFD111203 GBFD111005 GBFD111005 GBFD119501 GBFD119501 O&M of BSC Enhanced Channel Assignment Algorithm Enhanced Channel Assignment Algorithm Adaptive Adjustment of Uplink and Downlink Adaptive Adjustment of Uplink and Downlink Interval Type 1~31 1~31 None Interval Type 0~7 0~7 None Interval Type 0~50 0~50 W Interval Type 0~65535 0~65535 ms Enumeration Close(Close), Type Open(Open) Close, Open None GBFD114701 SemiPermanent Enumeration 8K(8K), 16K(16K), Connection Type 32K(32K), 64K(64K) 8K, 16K, 32K, 64K kbit/s GBFD111202 O&M of BTS GBFD111207 BTS Test Function Interval Type 0~254 TRXLOOPBACK(TRX Loopback Test), CHLLOOPBACK(Chan Enumeration nel Loopback Test), Type CHLCODEC(Speech 0~254 TRXLOOPBACK, CHLLOOPBACK, CHLCODEC None None GBFD111202 O&M of BTS Interval Type 0~31 0~31 None GBFD111207 GBFD111603 SIMPLETEST(Simple Test), BTS Test Enumeration MANUALTEST(Manual SIMPLETEST, Function Test) MANUALTEST TRX Power Type Amplifier Intelligent Shutdown Enumeration on Timeslot Type NO(No), YES(Yes) NO, YES None None GBFD111202 O&M of BTS Enumeration CHAIN(Chain), Type RING(Ring) CHAIN, RING None None None Interval Type 1~255 1~255 None None None Interval Type 1~128 1~128 s GBFD111610 Dynamic Cell Power Off Interval Type 0~8 Dynamic Cell Power Compound Off Type Dynamic Cell Power Compound Off Type 0~8 None GBFD111610 HOUR, MINUTE 00:00~23:59 None GBFD111610 HOUR, MINUTE 00:00~23:59 None GBFD111610 Dynamic DISABLE(Disable), Cell Power Enumeration ENABLE(Enable), Off Type SLEEPING(Sleeping) Dynamic Cell Power Off Interval Type 0~100 DISABLE, ENABLE, SLEEPING None GBFD111610 0~100 per cent GBFD111202 O&M of BTS Interval Type 40~79 40~79 degree Celsius GBFD111202 O&M of BTS Interval Type -99~99 -99~99 degree Celsius GBFD118201 SoftSynchroniz ed Network Interval Type 1~60 SoftSynchroniz ed Network Interval Type 1~60 SoftSynchroniz ed Network Interval Type 1~60 SoftSynchroniz ed Network Interval Type 1~60 SoftSynchroniz ed Network Interval Type 1~60 SoftSynchroniz ed Network Interval Type 1~60 SoftSynchroniz ed Network Interval Type Radio Common Channel Manageme Enumeration nt Type 1~60 s GBFD118201 1~60 s GBFD118201 1~60 s GBFD118201 1~60 min GBFD118201 1~60 min GBFD118201 1~60 s GBFD118201 GBFD111003 1~60 TX_3(3), TX_4(4), TX_5(5), TX_6(6), TX_7(7), TX_8(8), TX_9(9), TX_10(10), TX_11(11), TX_12(12), 1~60 TX_4, TX_5, TX_6, s TX_3, TX_7, TX_8, TX_9, TX_10, TX_11, TX_12, TX_14, TX_16, TX_20, TX_25, TX_32, TX_50 None GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118701 RAN Sharing Interval Type 0~10000 0~100 (step: 0.01) W GBFD118605 IP QOS Interval Type 1~3000000 1~3000000 kbit/s GBFD118605 IP QOS Interval Type 0~4000000 0~4000000 kbit/s None None GBFD119110 MRFD210301 GBFD111203 GBFD110101 Access Configuratio n Manageme Enumeration nt Type EPS, TCS ANY_ERR_RETURN( Stop at Error), O&M of Enumeration ALL_END_RETURN(S BSC Type top at End) GSM900, DCS1800, GSM900_DCS1800, GSM850, PCS1900, Frequency Enumeration GSM850_1800, Band Type GSM850_1900 OUTER(External Enumeration PCU), INNER(Built-in Type PCU) Interval Type 200~10000 T_2(2), T_3(3), T_4(4), T_5(5), T_6(6), T_7(7), T_8(8), T_9(9), Enumeration T_10(10), T_12(12), Type T_14(14), T_16(16), 200~10000 T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9, T_10, T_12, T_14, T_16, T_20, T_25, T_32, T_50 ms None EPS, TCS None ANY_ERR_RETURN, ALL_END_RETURN GSM900, DCS1800, GSM900_DCS1800, GSM850, PCS1900, GSM850_1800, GSM850_1900 None None GBFD114101 GPRS OUTER, INNER None GBFD510701 GBFD111202 Compact BTS Automatic Configuratio Enumeration GSM900, DCS1800, n and Type GSM850, PCS1900 BTS30(BTS30), BTS312(BTS312), BTS3001C(BTS3001C O&M of Enumeration ), BTS Type BTS3001CP(BTS3001 GSM900, DCS1800, GSM850, PCS1900 BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, None None GBFD110101 Frequency Band Enumeration GSM900(GSM900), Type DCS1800(DCS1800) GSM900, DCS1800 None GBFD111202 O&M of BTS Interval Type 0~15 0~15 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) 1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), Enumeration 9(9), 10(10), 11(11), Type 12(12) NO, YES None 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 None GBFD111202 O&M of BTS Interval Type 0~1,255 0~1, 255 None GBFD111202 O&M of BTS Interval Type 0~23,255 0~23, 255 None GBFD111202 O&M of BTS Interval Type 0~53,255 0~53, 255 None GBFD111202 O&M of BTS Interval Type 0~15 0~15 None GBFD111202 O&M of BTS GBFD111202 O&M of BTS Enumeration Type NO(NO), YES(YES) 1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), Enumeration 9(9), 10(10), 11(11), Type 12(12) NO, YES None 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 None GBFD111202 O&M of BTS Interval Type 0~1,255 0~1, 255 None GBFD111202 O&M of BTS Interval Type 0~23,255 0~23, 255 None GBFD111202 O&M of BTS Interval Type 0~53,255 0~53, 255 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118602 GBFD111005 Enumeration A over IP Type OFF(Off), ON(On) Enhanced Channel Assignment Enumeration Algorithm Type NO(No), YES(Yes) OFF, ON None NO, YES None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118601 Abis over IP Interval Type 0~15 0~15 None GBFD118602 GBFD118604 GBFD118610 GBFD118604 GBFD118610 A over IP Abis MUX UDP MUX for A Transmissio n Abis MUX UDP MUX for A Transmissio n Enumeration Type OFF(Off), ON(On) OFF, ON None Enumeration NORTPCOMP, Type RTPCOMP NORTPCOMP, RTPCOMP None Enumeration NORTPCOMP, Type RTPCOMP NORTPCOMP, RTPCOMP None GBFD118603 Gb over IP 1214~2001,2005~3783 ,3786~4783,4785~650 1214~2001, 2005~3783, Interval Type 00 3786~4783, 4785~65000 None GBFD118603 GBFD111203 MRFD210305 Gb over IP Interval Type O&M of BSC Security Manageme Enumeration nt Type 0~65535 None Administrators(Adminis 0~65535 trator), Operators(Operator), Users(User), Administrators, Operators, Guests(Guest), Users, Guests, Customs None GBFD111202 GBFD510301 GBFD510302 O&M of BTS Public Voice Group Call Service Public Interval Type 0~99 0~99 None Interval Type 0~64 0~64 None None None Interval Type 300~1000 300~1000 ms MRFD210304 Faulty Manageme nt String Type Faulty Manageme nt HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm None 0~9 Characters None MRFD210304 String Type None GBFD117601 Interval Type 0~255 1~8 characters TCH:480~122400, step:480; SDCCH:470~119850, step:470 None ms GBFD117601 Interval Type 1~30 1~30 dB GBFD117601 Interval Type 1~30 1~30 dB GBFD117601 Interval Type 1~30 1~30 dB GBFD117601 Interval Type 1~30 1~30 dB GBFD510501 HUAWEI II Handover Interval Type 1~8 0.5~4, step:0.5 s GBFD510501 GBFD119501 HUAWEI II Handover Interval Type 1~8 Adaptive Adjustment of Uplink and Downlink Interval Type 1~255 0.5~4, step:0.5 s 1~255 None GBFD111203 O&M of BSC Interval Type 0~240 0~240 ms GBFD119105 RLC Mode Interval Type 1~64 1~64 None GBFD110601 GBFD510501 HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 0~63 dB GBFD119105 RLC Mode Interval Type 1~64 1~64 None GBFD119105 GBFD117601 GBFD117601 GBFD117601 GBFD117601 GBFD117601 RLC Mode HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Interval Type 1~64 1~64 None Interval Type 1~10 1~10 None Interval Type 1~30 1~30 dB Interval Type 1~30 1~30 dB Interval Type 1~30 1~30 dB Interval Type 1~30 1~30 dB GBFD115501 AMR FR Interval Type 0~15 0~15 None GBFD115501 AMR FR Interval Type 0~15 0~15 None GBFD115501 AMR FR Interval Type 0~15 0~15 None GBFD115502 AMR HR Interval Type 0~15 0~15 None GBFD115502 AMR HR Interval Type 0~15 0~15 None GBFD115502 AMR HR Interval Type 0~15 0~15 None GBFD115507 WB AMR Interval Type 0~15 0~15 None GBFD115507 WB AMR Interval Type 0~15 0~15 None MRFD211402 GBFD110703 GBFD117601 GBFD117601 MBSC Load Balancing Enhanced Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Interval Type 1~100 1~100 None Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms Interval Type 1~30 1~30 dB Interval Type 1~30 1~30 dB MRFD211402 GBFD110703 GBFD110703 GBFD110703 MBSC Load Balancing Enhanced Power Control Algorithm Enhanced Power Control Algorithm Enhanced Power Control Algorithm Interval Type 1~100 1~100 None Interval Type 0~3 0~3 None Interval Type 0~7 0~7 None Interval Type 0~7 0~7 None GBFD110703 GBFD110703 GBFD110703 GBFD110601 GBFD510501 Enhanced Power Control Algorithm Enhanced Power Control Algorithm Enhanced Power Control Algorithm HUAWEI I Handover HUAWEI II Handover Interval Type 1~20 TCH:480~9600, step:480; SDCCH:470~9400, step:470 ms Interval Type 0~7 0~7 None Interval Type 0~63 0~63 dB Interval Type 0~70 0~70 None GBFD115501 AMR FR Interval Type 0~70 0~70 None GBFD115502 GBFD117601 GBFD117601 GBFD117601 GBFD117601 GBFD117601 GBFD117601 AMR HR HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Interval Type 0~70 0~70 None Interval Type 0~10 0~10 None Interval Type 0~19 TCH:0~9120, step:480; SDCCH:0~8930, step:470 ms Interval Type 0~63 0~63 dB Interval Type 0~63 0~63 dB Interval Type 1~20 TCH:0~9120, step:480; SDCCH:0~8930, step:470 ms Interval Type 0~10 0~10 None GBFD117601 GBFD117601 GBFD117601 GBFD117601 GBFD110703 GBFD110703 HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm HUAWEI III Power Control Algorithm Enhanced Power Control Algorithm Enhanced Power Control Algorithm Interval Type 0~19 TCH:0~9120, step:480; SDCCH:0~8930, step:470 ms Interval Type 1~20 TCH:0~9120, step:480; SDCCH:0~8930, step:470 ms Interval Type 0~100 0~100 None Interval Type 0~100 0~100 None Interval Type 0~63 0~63 dB Interval Type 0~63 0~63 dB GBFD115501 AMR FR Interval Type 0~63 0~63 dB GBFD115501 AMR FR Interval Type 0~63 0~63 dB GBFD115501 AMR FR Interval Type 0~63 0~63 dB GBFD115502 AMR HR Interval Type 0~63 0~63 dB GBFD115502 AMR HR Interval Type 0~63 0~63 dB GBFD115502 AMR HR Interval Type 0~63 0~63 dB GBFD115507 WB AMR Interval Type 0~63 0~63 dB GBFD115507 WB AMR Interval Type 0~63 0~63 dB GBFD113201 Concentric Cell Enumeration Type NO(No), YES(Yes) NO, YES None GBFD119105 RLC Mode Interval Type 1~64 1~64 None GBFD111203 GBFD110601 GBFD510501 MRFD210301 O&M of BSC HUAWEI I Handover HUAWEI II Handover Configuratio n Manageme nt Enumeration NO(Not Allowed), Type YES(Allowed) NO, YES None Interval Type 0~255 GSM_PHASE_1, Enumeration GSM_PHASE_2, Type GSM_PHASE_2Plus 0~255 GSM_PHASE_1, GSM_PHASE_2, GSM_PHASE_2Plus s None None None Enumeration Type NO(NO), YES(YES) NO, YES None GBFD510002 Gb Over FR Interval Type 1~6 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 1~6 None MRFD210304 10~3500 mA MRFD210304 10~3500 mA MRFD210304 10~3500 mA MRFD210304 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 Faulty Manageme nt Interval Type 10~3500 10~3500 mA MRFD210304 10~3500 mA MRFD210304 10~3500 mA GBFD111202 O&M of BTS Interval Type 0~2047 0~2047 None GBFD111202 O&M of BTS Interval Type 0~2047 0~2047 None GBFD111202 O&M of BTS Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None GBFD111202 O&M of BTS Enumeration BYNAME(By Name), Type BYID(By Index) BYNAME, BYID None GBFD111202 O&M of BTS String Type None 1~64 characters None GBFD111202 O&M of BTS Simplified Cell Broadcast String Type None 1~64 characters None GBFD113602 Interval Type 0~15 0~15 None GBFD119106 Coding Scheme GBFD114201 EGPRS Enumeration CS1(CS1), CS2(CS2), Type CS3(CS3), CS4(CS4) MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Enumeration MCS4(MCS4), Type MCS5(MCS5), CS1, CS2, CS3, CS4 MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9 None None GBFD113101 GBFD510803 GBFD510803 PDCH Dynamic Adjustment Interval Type 10~70 MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Uplink Enumeration MCS4(MCS4), EGPRS2-A Type MCS5(MCS5), MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Uplink Enumeration MCS4(MCS4), EGPRS2-A Type MCS5(MCS5), 10~70 None MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, UAS7, UAS8, UAS9, UAS10, UAS11 None MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, UAS7, UAS8, UAS9, UAS10, UAS11, UNFIXED None GBFD119203 Extended Uplink TBF Interval Type 0~5000 CS1(CS1), CS2(CS2), Enumeration CS3(CS3), CS4(CS4), Type UNFIXED(UNFIXED) MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), Enumeration MCS4(MCS4), Type MCS5(MCS5), 0~5000 ms GBFD119106 Coding Scheme GBFD114201 GBFD110601 GBFD510501 GBFD110601 GBFD510501 EGPRS HUAWEI I Handover HUAWEI II Handover Interval Type 0~70 HUAWEI I Handover HUAWEI II Handover Interval Type 0~63 Group Call Reliability Enhancing CS1, CS2, CS3, CS4, UNFIXED MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9, UNFIXED None None 0~70 None 0~63 dB GBFD510309 Interval Type 10~255 10~255 s GBFD118601 GBFD110703 GBFD117601 Abis over IP Interval Type 0~96 Enhanced Power Control Algorithm Enumeration HUAWEI III Type NO(No), YES(Yes) 0~96 None NO, YES None GBFD118605 IP QOS Interval Type 0~2047 0~2047 None None GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110601 GBFD510501 GBFD110203 None HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover HUAWEI I Handover HUAWEI II Handover Point To Point Short Message Service (TS21, Interval Type 512~1535 512~1535 None Interval Type 1~16 1~16 s Interval Type 1~10 0.1~1, step:0.1 None Interval Type 1~16 1~16 s Enumeration Type NO(No), YES(Yes) NO, YES None GBFD119203 Extended Uplink TBF Interval Type 0~300 0~300 ms GBFD119106 Coding Scheme Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 0~64 per cent GBFD119106 Coding Scheme Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 0~64 per cent GBFD118901 CS-3/CS-4 Interval Type 0~64 0~64 per cent GBFD116201 GBFD111203 NetworkControlled Cell Reselection Enumeration FORBID(Forbid), (NC2) Type PERMIT(Permit) BYTMSI(By TMSI), BYIMSI(By IMSI), BYMSISDN(By O&M of Enumeration MSISDN), BYIMEI(By BSC Type IMEI) NOTSUPPORT(Not Enumeration Support), Type SUPPORT(Support) FORBID, PERMIT None BYTMSI, BYIMSI, BYMSISDN, BYIMEI None GBFD114101 GBFD111203 MRFD210403 GPRS O&M of BSC License Manageme nt String Type NOTSUPPORT, SUPPORT None None 1~32 characters None GBFD111202 O&M of BTS String Type None 1~32 characters None GBFD111202 O&M of BTS Compound Type HOUR, MINUTE HOUR 0~23 MINUTE 0~59 None GBFD111202 O&M of BTS Compound Type HOUR, MINUTE HOUR 0~23 MINUTE 0~59 None GBFD111202 O&M of BTS Interval Type -99~99 -99~99 degree Celsius GBFD113201 Concentric Cell Interval Type 0~8 0~8 None GBFD113201 Concentric Cell Interval Type 0~255 0~255 s GBFD113201 Concentric Cell Interval Type 0~63 0~63 dB GBFD113201 Concentric Cell Enumeration Type NO(No), YES(Yes) NO, YES None GBFD113201 Concentric Cell Interval Type 1~255 1~255 s GBFD113201 GBFD114301 GBFD114302 Concentric Cell 1~63 GSM/WCD Interval Type 1~63 MA Interoperabi lity Enumeration GSM/TDType FDD(FDD), TDD(TDD) FDD, TDD dB None GBFD111202 O&M of BTS String Type None 2 characters None GBFD111705 GSM Flow Control Interval Type 50~95 50~95 per cent GBFD111705 GSM Flow Control GBFD111705 GSM Flow Control Enumeration Type NO(No), YES(Yes) NONE(None), LEVEL4(User Level 4), LEVEL3(User Level 3), Enumeration LEVEL2(User Level 2), Type LEVEL1(User Level 1), NO, YES None NONE, LEVEL4, LEVEL3, LEVEL2, LEVEL1, LEVEL0, LEVELB, LEVELA None GBFD111705 GSM Flow Control Interval Type 50~95 50~95 per cent GBFD118605 IP QOS Enumeration DISABLE(Disable), Type ENABLE(Enable) DISABLE, ENABLE None None None Enumeration Type DISABLE, ENABLE DISABLE, ENABLE None None None Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None None None Enumeration DISABLE(DISABLE), Type ENABLE(ENABLE) DISABLE, ENABLE None None None Interval Type 2~4094 2~4094 None GBFD118630 Ethernet OAM Interval Type 2~4094 2~4094 None GBFD118601 GBFD118630 MRFD210301 Abis over IP Interval Type 2~4094 Ethernet OAM Configuratio n Manageme Interval Type 2~4094 2~4094 None 2~4094 None None None Interval Type 2~4094 2~4094 None None None Interval Type 2~4094 2~4094 None None None Interval Type 0~7 0~7 None GBFD118601 Abis over IP Interval Type 0~7 0~7 None GBFD118601 MRFD210301 Enumeration Abis over IP Type Configuratio n Manageme nt Bit Field Type NO(N0), YES(Yes) FULL_RATE_VER1, FULL_RATE_VER2, FULL_RATE_VER3, HALF_RATE_VER1, HALF_RATE_VER2, NO, YES Full_rate_Ver1, Full_rate_Ver2, Full_rate_Ver3, Half_rate_Ver1, Half_rate_Ver2, None None MRFD210304 Faulty Manageme Enumeration CLOSE(Close), nt Type OPEN(Open) Faulty Manageme nt String Type CLOSE, OPEN None MRFD210304 None 1~9 characters V MRFD210304 Faulty Manageme nt String Type None 1~9 characters V MRFD210304 Faulty Manageme Enumeration CLOSE(Close), nt Type OPEN(Open) Faulty Manageme nt String Type Faulty Manageme nt String Type CLOSE, OPEN None MRFD210304 None 1~9 characters V MRFD210304 None 1~9 characters V MRFD210304 Faulty Manageme Enumeration nt Type NO(NO), YES(YES) NO, YES None GBFD111202 O&M of BTS Interval Type 0~12 0~12 None MRFD210304 MRFD210304 MRFD210304 Faulty Manageme nt Interval Type 1~30 15(1.5), 14(1.4), 16(1.6), 18(1.8), Faulty 20(2.0), 22(2.2), Manageme Enumeration 24(2.4), 26(2.6), nt Type 28(2.8), 30(3.0), 18(1.8), 20(2.0), 22(2.2), 24(2.4), Faulty 26(2.6), 28(2.8), Manageme Enumeration 30(3.0), 32(3.2), nt Type 35(3.5), 38(3.8), 1~30 14, 15, 16, 18, 20, 18, 20, 22, 24, 26, None None None GBFD111202 O&M of BTS Interval Type 0~12 0~12 None GBFD111202 GBFD111004 O&M of BTS Interval Type 0~999 Radio Dedicated Channel Manageme nt Interval Type 4000~33000 0~999 None 4000~33000 ms GBFD115501 AMR FR Interval Type 3000~34000 3000~34000 ms GBFD115502 AMR HR Interval Type 3000~34000 3000~34000 ms None None Interval Type 0~1000 0~1000 s GBFD110202 GBFD117002 Emergency Call Service (TS12) Interval Type 1~30 IBCA (Interferenc e Based Channel Allocation) Interval Type 0~60 1~30 s 0~60 s None None Interval Type 0~1000 0~1000 s GBFD111202 O&M of BTS Faulty Manageme nt O&M of BSC Security Manageme nt Enumeration INACTIVE(Inactive), Type ACTIVE(Active) INACTIVE, ACTIVE None MRFD210304 GBFD111203 MRFD210305 Enumeration CLOSE(Close), Type OPEN(Open) CLOSE, OPEN None GBFD115402 Enumeration NOLIMIT(No Limit), Type LIMIT(Limit) NOLIMIT, LIMIT East_Longitude(East BSS-Based Longitude), LCS (Cell Enumeration West_Longitude(West East_Longitude, ID + TA) Type Longitude) West_Longitude None None GBFD111202 GBFD118609 O&M of BTS IP Fault Detection Based on BFD Enumeration INACTIVE(Inactive), Type ACTIVE(Active) INACTIVE, ACTIVE None Enumeration Type NO(NO), YES(YES) NO, YES None GBFD118601 GBFD111203 MRFD210305 GBFD118602 Enumeration DENY(Deny), Abis over IP Type ALLOW(Allow) O&M of SUN(Sunday), BSC MON(Monday), Security TUE(Tuesday), Manageme Enumeration WED(Wednesday), nt Type THU(Thursday), M3UA_ASP(M3UA_AS P), Enumeration M3UA_IPSP(M3UA_IP A over IP Type SP) DENY, ALLOW None SUN, MON, TUE, WED, THU, FRI, SAT None M3UA_ASP, M3UA_IPSP None GBFD111202 O&M of BTS Interval Type 0~24 0~24 h GBFD111202 O&M of BTS Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 O&M of BTS Interval Type 1~255 5~1275, step:5 min GBFD111202 O&M of BTS Interval Type 0~24 0~24 h GBFD111202 MRFD210301 O&M of BTS Configuratio n Manageme nt Enumeration Type NO(No), YES(Yes) NO, YES None GBFD111202 MRFD210301 None O&M of BTS Configuratio n Manageme Enumeration nt Type GO(GSM Only) GO None E1_UNBA(E1 Unbalance), E1_BA(E1 Enumeration Balance), T1(T1), None Type E1(E1) E1_UNBA, E1_BA, T1, E1 None Active(Format active Enumeration area), Standby(Format Type standby area) Active, Standby None GSM_AND_UMTS(GS M AND UMTS), Enumeration UMTS(UMTS), GSM_AND_UMTS, UMTS, Type GSM(GSM) GSM None GBFD111202 O&M of BTS Enumeration Type E1(E1), T1(T1) E1, T1 None GBFD111203 O&M of BSC Interval Type 1~127 1~127 None GBFD113728 OML Backup Interval Type 30~300 30~300 s GBFD117801 Ring Topology Interval Type 60~300 60~300 s GBFD111701 MRFD210301 Board Switchover Interval Type Configuratio n Manageme Enumeration nt Type 30~60000 GMT-1200(GMT12:00), GMT1100(GMT-11:00), GMT-1000(GMT10:00), GMT- 30~60000 GMT-1200(GMT-12:00), GMT-1100(GMT-11:00), GMT-1000(GMT-10:00), GMT-0930(GMT-09:30), GMT-0900(GMT-09:00), s None Default Value Recommended Value Parameter Relationship Interrupted After Modification Impact Service Access Interruption Scope Duration(Min) Interruption N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) 50 50 Cell None Not involved Not involved 50 50 Cell None Not involved Not involved 40 40 Cell None Not involved Not involved FALSE FALSE BTS None YES YES Cell 30 30 BSC 60 60 BSC None The value of this parameter should be smaller The value of this parameter should be greater IDLETSALLOC_ IDLETSALL O OC_O BTS None CLOSE CLOSE BTS None 90 90 BSC None NO NO BTS None 15 15 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved It is recommend ed that the value of this GSM_PHASE_2 parameter is BSC The value of this parameter is the same as those of Read & Write 40 40 BSC6900 None Read & Write 100 100 BSC None Read & Write 8BIT 8BIT Cell None Read & Write 0 0 Cell Usubcell Usubcell Cell None Read & Write This parameter is valid only when "IUOTP" in Read & Write NEUTRAL NEUTRAL Cell None Read & Write Enable Enable PPP link None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES BTS None CLOSE CLOSE BSC None FLEX 4_75KBIT/S1&5_15KBIT/S0&5_90KBIT/S1&6_70KBIT/S0&7_40KBIT/S- FLEX 4_75KBIT/S- Cell 1&5_15KBIT /S0&5_90KBIT /SCell None None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) PPP link Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved 4_75KBIT/S1&5_15KBIT/S0&5_90KBIT/S1&6_70KBIT/S0&7_40KBIT/S6_60KBIT/S1&8_85KBIT/S1&12_65KBIT/S1 4_75KBIT/S1&5_15KBIT /S0&5_90KBIT /S6_60KBIT/S- Cell 1&8_85KBIT /S1&12_65KBI T/S-1 Cell None Read & Write None Read & Write NO NO Cell None Read & Write 10 10 BSC6900 180 180 BTS 2800 2800 BTS 1800 1800 BTS 280 280 BTS None The value of this parameter must be smaller The value of this parameter must be greater The value of this parameter must be smaller The value of this parameter must be greater Read & Write Read & Write Read & Write Read & Write Read & Write NO NO Cell None Read & Write None None BTS None Read & Write 0 0 BSC None Read & Write 2 2 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write BYAUTO None BSC6900 None Read & Write 2 2 Cell None Read & Write OFF OFF BTS None Read & Write None None BTS None Read & Write UNLOCK UNLOCK Cell None Read & Write Unlock Unlock TRX Current BFD session None Read & Write Unlock Unlock None Read & Write None None BSC6900 None Read & Write 10 10 BSC6900 None Read & Write OFF OFF BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) If the value of this parameter is modified tothe value If "Lock", of this parameter is modified to "Lock", N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Cell TRX Channel Not involved The services are disrupted until this Services will be disrupted until the value of Services will be disrupted until the value of Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write None None BTS None None BTS None Read & Write This parameter can be configured only when Read & Write 400 400 Board None Read & Write 20 20 Board None Read & Write -48 -48 Board None Read & Write 0 0 Board None Read & Write 6 6 Board None Read & Write CLOSE CLOSE Board 20 20 Board 4 4 Board None Read & Write If the number of echo cancellation s the Read & Write If number of echo cancellation s Read & Write 64_Times 64_Times Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 48 48 Cell None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None None None None None Board None 52_Times 52_Times Cell None 32 32 Cell None None None None None None None None None None None BSC6900 None None None BSC6900 None None None BSC6900 None None None BTS None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 15 15 Cell None Read & Write None None BSC6900 None Read & Write None None BTS None Read & Write NO NO BSC None Read & Write YES YES BSC None Read & Write YES YES BSC None Read & Write YES YES BSC None Read & Write YES YES BSC None Read & Write NO NO BSC None Read & Write ABIS ABIS BSC None Read & Write 5 5 BSC None Read & Write 5 5 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 BSC None Read & Write 10 10 BSC None Read & Write 10 10 BSC None Read & Write 10 10 BSC None Read & Write None NO BSC None Read & Write 6 6 Board None Read & Write -18 -18 Board None Read & Write 6 6 Board None Read & Write -4 -4 Board None Read & Write -23 -23 Board None Read & Write FIXEDGAIN FIXEDGAIN Board None Read & Write CLOSE CLOSE Board None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 BSC None Read & Write 3 None None 3 BSC Transmissi on resource group None Read & Write When "BWMODE " in "ADD RSCGRP" is set to Read & Write ALLOW ALLOW BSC None Read & Write OFF OFF Cell 100 100 Cell None The following condition must be met: Read & Write Read & Write NOTALLOW NOTALLOW BSC None Read & Write 4 4 Cell 100 100 Cell None The following condition must be met: Read & Write Read & Write None ALLCIC E1/T1 link None Read & Write ALLCIC ALLCIC PBE1T1 None Read & Write 30 30 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 30 30 BTS None Read & Write 30 30 BTS None Read & Write 30 30 BTS None Read & Write 30 30 BTS None Read & Write 30 30 BTS None Read & Write None None BTS None Read & Write YES YES BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write 10 10 BTS None Read & Write 100 100 BTS None Read & Write 150 150 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS 0 0 BTS None Read & Write The recommen ded value of this parameter Read & Write 0 0 BTS 0 0 BTS None Read & Write The recommen ded value of this parameter Read & Write 0 0 BTS None Read & Write NO NO BTS None Read & Write all all BSC6900 None Read & Write 6 6 Cell None Read & Write 0 0 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None 40 40 Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None Read & Write None None BSC6900 None Read & Write DISABLED DISABLED BTS None Read & Write DISABLED DISABLED BTS None Read & Write DISABLED DISABLED BTS None Read & Write DISABLED DISABLED BTS None Read & Write DISABLED DISABLED BTS None Read & Write DISABLED DISABLED BTS 16 16 Cell ON ON Cell None Read & Write This parameter is valid when "PWRCTR Read & Write This parameter is valid only when "PWRCTR Read & Write NO NO Cell 5 5 Cell None Read & Write This parameter is valid when "PWRCTR Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Cell 0 0 Cell 3 3 Cell 5 5 Cell 2 2 Cell 8 8 Cell 33 33 Cell 25 25 Cell NO NO Cell 2 2 Cell 20 20 Cell 1 1 Cell This parameter is valid when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 100 100 Cell 0 0 Cell 75 75 Cell 4 4 Cell 108 108 Cell NO NO Cell 3 3 Cell 15 15 Cell 8 8 Cell 2 2 Cell 0 0 Cell 0 0 Cell This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 8 8 Cell YES YES Cell 3 3 Cell 4 4 Cell This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR Read & Write Read & Write Read & Write Read & Write 0 0 Cell None Read & Write ON ON Cell None Read & Write 55 55 Cell None Read & Write NO NO Cell 5 5 Cell 0 0 Cell 0 0 Cell 3 3 Cell None This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 Cell 3 3 Cell 6 6 Cell 30 30 Cell 18 18 Cell This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write 2 2 BSC None Read & Write 2 2 MSC None Read & Write 6 6 Board None Read & Write CLOSE CLOSE Board None Read & Write 12 12 Board None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Adjacent node None Not Read & Write involved Not involved Not involved None None IP path None Read & Write None None BSC6900 None Read & Write MODE0 MODE0 Board None Read & Write -13 -13 Board None Read & Write -48 -48 Board None Read & Write CLOSE CLOSE Board None Read & Write 360 None Cell None Read & Write 0 0 BTS None Read & Write NOPOWER NOPOWER BTS None Read & Write OFF OFF Board None Read & Write NO NO BTS None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None TRX None None TRX NULL NULL BTS Not None Read & Write involved N (No impact on the UE in None Read & Write idle mode) The setting of this N (No parameter impact on depends on the UE in "Board Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None MTP3 link None Not Read & Write involved Not involved Not involved None None SCTP link None Not Read & Write involved Not involved Not involved None None BSC None 20 20 BSC None 1024 1024 BSC None 256 256 BSC None 20 20 BSC None 10 10 BSC None 20 20 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved CLOSE CLOSE BSC None Read & Write 384 384 BSC None Read & Write 0 None BSC None Read & Write PRIMARY None None None Read & Write PRIMARY PRIMARY None 50 50 TRX 100 100 TRX 100 100 TRX None This parameter is valid only when "WLNKAL This parameter is valid only when "WLNKAL This parameter is valid only when "WLNKAL Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 3 Ethernet 3 port None 3 Ethernet 3 port None Ethernet Read & Write Y port N (No impact on the UE in Not Read & Write idle mode) involved Not involved Interrupt the service until the correct gateway is Not involved None None MTP3 link None None None ATERCON SL None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None MTP3 link None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write OFF OFF Cell None Read & Write DISABLE DISABLE Cell 35 35 Cell None In an enhanced concentric cell, if "LOWRXL Read & Write Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 30 30 BSC None Read & Write 10000 10000 Cell None Read & Write 30 30 BSC None Read & Write 60 60 MSC 30 30 BSC 60 60 MSC None Read & Write This parameter is used with "T18 -s" in flow control Read & Write This parameter is used with "T17 -s" in flow control Read & Write 30 30 BSC None Read & Write 30 30 BSC None Read & Write 20 20 MSC NO NO Cell 2 2 Cell 10 10 Cell None This parameter is valid only when "IUOTP" is This parameter is valid only when "ATCBHoS This parameter is valid only when "ATCBHoS Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES BSC Open Open BSC 85 85 BSC N (No impact on the UE in None Read & Write idle mode) If the resource N (No usage on impact on the Ater the UE in interface Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "AterCongH Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None MTP3 link None 90 90 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None E1/T1 link None Not Read & Write involved Not involved Not involved None None BSC None None None E1/T1 link None None None E1/T1 link None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None ATERCON SL None Not Read & Write involved Not involved Not involved TDM TDM BSC None None None None None Read & Write Y BSC6900 N (No impact on the UE in Not Read & Write idle mode) involved Less than 10 minutes Not involved None None MTP3 link None Read & Write YES YES Cell None Read & Write 0 0 BTS None Read & Write 0 0 BTS None Read & Write None 60 None None Read & Write 1 1 E1/T1 port None Read & Write None None BSC6900 None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None PPP link None Read & Write Y PPP link None None MP group None Read & Write Y BSC6900 Not involved Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull None None BTS None Read & Write Y PPP link None None PPP link None Read & Write Y BSC6900 None None MP group None Read & Write Y BSC6900 Less than 5 minutes Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull None None BTS This parameter is required only when "Validate Read & Write Y PPP link None None PPP link None Read & Write Y PPP link None None MP group None None BTS None Read & Write Y This parameter is required only when "Validate Read & Write Y BSC6900 Less than 5 minutes Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull PPP link NO_V NO_V PPP link None Read & Write Y PPP link NO_V NO_V MP group None Read & Write Y BSC6900 Less than 5 minutes Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull NO_V NO_V BTS None Read & Write Y PPP link None ENABLE Ethernet port None YES None None None YES YES Cell None YES YES Cell None NO NO BSC None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Less than 5 minutes Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved ENABLED ENABLED BTS None Read & Write None None BTS None Read & Write ON None BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Channelize d optical None AU4 None GSM_PHAS port Generally, Read & Write E_2 is the value of recommend this ed in parameter GSM_PHASE_2 common BSC is equal to Read & Write HIGH None None None Read & Write LOW LOW BTS None Read & Write None None Board None Read & Write None None Board None Read & Write None None Board None Read & Write None None Board None Read & Write Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Optical port Not involved If the mode is not consistent, will interrupt Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved OFF None Board None OFF None Board None None None BSC6900 None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 55 55 Cell ALLTLLI ALLTLLI BSC None None BTS None None None None None Ethernet port BYTRX BYTRX BTS BYCOVER BYCOVER BTS 1 1 Cell Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No can work impact on with the UE in "BTSPOW Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "BAKPWR Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 Cell None Read & Write 1 1 Cell None Read & Write 20 20 Cell None Read & Write None None None None Read & Write None Battery1Temp None BSC6900 For EPS4815 boards, the value of this parameter is BTS None Read & Write None Read & Write Battery1Temp Battery1Tem p BTS None Read & Write 50 50 BTS None Read & Write NO NO BTS None Read & Write 50 50 BTS None Read & Write NO_BAT NO_BAT BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 58000 58000 SCTP link None Read & Write Y Not involved The services are interrupted SCTP link until the 8 8 TRX This parameter is valid only when "WLNKAL Read & Write 36 36 BTS None N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None Cell None Read & Write Y Cell Less than 5 minutes None None Cell None None None BTS None Read & Write Y Cell N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None Cell None None None Cell None Read & Write Y Cell N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None Cell None 80 80 BSC None 60 60 BSC None 14 14 BSC None None None BC None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved If "Power System Type" is "APM30", 15 the BTS 565 565 BTS None The value of this parameter must be greater Read & Write Read & Write NO NO BTS None Read & Write 8 8 Cell None Read & Write 4 4 Cell None Read & Write 2 2 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCCP None 1 1 BSC None 5 5 Cell None 1 1 Cell NO NO Cell YES YES Cell None This parameter is valid only when the ""INTERRA This parameter is valid only when "HOCTRLS Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 4 4 Cell 6 6 Cell Current BFD 3 session Current BFD session This parameter is valid only when "BETTERC Read & Write This parameter is valid only when "BETTERC Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved 3 None None 30 30 TRX ALL ALL Cell None None BSC6900 4 4 Cell 2 2 Cell 1 1 Cell ENABLE None BSC6900 0 None BSC6900 Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "WLNKAL Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None set Read & Write idle mode) If you "Switch of N (No stat blinking impact on alarm" to the UE in "ENABLE", Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 900 None BSC6900 ENABLE None BSC6900 None set Read & Write If you "Switch of stat blinking alarm" to "ENABLE", Read & Write 4 4 BSC None Read & Write 10 10 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Transport channel None Not Read & Write involved Not involved Not involved None None Transport channel None Not Read & Write involved Not involved Not involved None None Transport channel 1000 1000 BSC None Read & Write This parameter is valid when "BMTCFFL Read & Write Not involved N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved None NO MP group None None None BSC6900 None NULL NULL BTS NULL NULL BTS None The value of this parameter must be greater Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES Cell 1 1 Cell None Read & Write This parameter is valid only when "BQHOEN" Read & Write 69 69 Cell 1 1 Cell None Read & Write This parameter is valid only when "BQHOEN" Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None BTS None Read & Write None None None None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Board None None None None None Read & Write Y BSC6900 N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None Ethernet port None None BSC6900 None None BSC6900 None None BSC6900 None None BTS None None None 0 0 BTS Cell name None Cell 60 60 Cell INCREMENTAL None BSC6900 Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) The setting of this N (No parameter impact on must meet the UE in the Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 Cell None Read & Write None None BSC None Read & Write NO NO BSC None Read & Write None None E1/T1 link None Read & Write None None BSC None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None Adjacent node None Read & Write None None Cell None Read & Write 5 5 BSC6900 None Read & Write None None BSC None None BTS None Read & Write The IP address must have been configured. Read & Write Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved BTS Less than 5 minutes UNCONDITI UNCONDITIONA ONALSTAR LSTART T BSC None Read & Write None None BSC None Read & Write YES YES BSC NO NO BSC None Read & Write This parameter is valid only when "BSCPMA" Read & Write None None BTS None Read & Write None None BSC None Read & Write YES YES BSC YES YES BSC NO NO BSC None Read & Write When "BSCPMA" is set to YES and "BSCQAD" Read & Write This parameter is valid only when "BSCQAD" Read & Write 65535 65535 BSC None Read & Write 65535 65535 BSC None Read & Write 65535 65535 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BSC None Read & Write 0 0 BSC None Read & Write 0 0 BSC None Read & Write 0 0 BSC None Read & Write 0 0 BSC None Read & Write 0 0 BSC None Read & Write 0 0 BSC None Read & Write 0 0 BSC None Read & Write 65535 65535 BSC None Read & Write 65535 65535 BSC None Read & Write 65535 65535 BSC None Read & Write 65535 65535 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BSC None Read & Write 0 0 BSC None Read & Write 0 0 BSC None Read & Write 65535 65535 BSC None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BSC6900 None None None When configure TC data, for E1/T1 link example, Read & Write Read & Write None None BSC None Read & Write None None BTS None Read & Write 10 10 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES Cell This parameter must be set when "BTSMESR Read & Write 4 4 Cell None Read & Write 2_M_PERIOD 2_M_PERIO D Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write NEITHERST NEITHERSTART ART BSC None Read & Write NONSUPPORT NONSUPPO RT MSC None Read & Write YES YES Cell None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None E1/T1 port None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Read & Write Y Cell Less than 5 minutes None None E1/T1 port None Not Read & Write involved Not involved Not involved None None Board None Not Read & Write involved Not involved Not involved None None Channelize d optical port None None None IP logical port None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None E1/T1 port None Not Read & Write involved Not involved Not involved None None BTS None None BTS None None BTS None None BTS None None BTS Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) The value range of N (No this impact on parameter the UE in varies with Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Not Read & Write involved Not involved Not involved None None E1/T1 link None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None ATERCON SL None YES YES Cell None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved LOGICIP LOGICIP BTS None None None BTS None CLOSE CLOSE BTS None None None Adjacent node None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BTS None None None None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None None None None None None None BSC6900 None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BTS UNCONDITI UNCONDITIONA ONALSTAR LSTART T BSC None The value of BtsLsStart Mode should be None None BTS BTS_Preprocess BTS_Prepro ing cessing Cell None None BTS Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in None value Read & Write idle mode) If the of this N (No parameter impact on is the UE in BSC_Prepr Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None None None None None ON ON BTS None NO NO BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 16 16 Cell This parameter is valid when "PWRCTR Read & Write OFF OFF Cell None None None None None None BTS None This parameter is used to caculate BindWidth N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Not Read & Write involved Not involved Not involved None None None NO_BAT NO Not Read & Write involved N (No impact on the UE in None None None Read & Write idle mode) N (No Current impact on BFD the UE in 3 3 session None Read & Write idle mode) N (No impact on the UE in None None None Read & Write idle mode) N (No impact on the UE in NO_BAT BTS None The setting Read & Write idle mode) of this N (No parameter impact on must meet the UE in 60 60 BTS the Read & Write idle mode) N (No impact on the UE in NO SCTP link None Read & Write idle mode) None BTS None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None None None Cell None 1000 1000 BSC None None IP logical port None The dynamic bandwidth switch is Not turned only Read & Write involved Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 20 20 BSC6900 None Not Read & Write involved Not involved Not involved 15 15 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 1 1 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 5 5 BSC6900 None Not Read & Write involved Not involved Not involved 0 120 None 25 80 None C31STANDARD 0 None None Not Read & Write involved N (No impact on IP logical the UE in 120 port None Read & Write idle mode) When Transmissi "GRPT" in N (No on "ADD impact on resource RSCGRP" the UE in None group is set to IP, Read & Write idle mode) N (No impact on IP logical the UE in 25 port None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in 80 TRX "WLNKAL Read & Write idle mode) N (No impact on the UE in None BSC6900 None Read & Write idle mode) N (No impact on C31STAND the UE in ARD Cell None Read & Write idle mode) N (No impact on the UE in 0 Cell None Read & Write idle mode) N (No impact on the UE in None BTS None Read & Write idle mode) N (No impact on the UE in None None None Read & Write idle mode) 0 BSC6900 None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved YES If this parameter is set to NO, the average call drop rate Cell None Read & Write None None None None Read & Write YES YES Cell None Read & Write None None BTS GSM900 GSM900 BTS None This parameter has relations with Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not Involved NULL NULL IP path None Read & Write Y IP path Less than 5 minutes None None IP logical port None Not Read & Write involved Not involved Not involved None NO None None The CBA function applies to special scenarios. If Cell None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC None None None BSC None 30 30 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write 15 15 BSC None Read & Write NO NO Cell None Read & Write 4500 IP logical 4500 port None Read & Write 3 3 BSC 2 2 Cell 6 6 Cell None Read & Write This parameter is valid only when "MEASURE Read & Write This parameter is valid only when "MEASURE Read & Write 86 None BSC None Read & Write None None BSC6900 None Read & Write 15 15 Cell None Read & Write 80 80 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 46 46 BSC None Not Read & Write involved Not involved Not involved 1000 Ethernet 1000 port None Read & Write 90 90 Cell None Read & Write 0 0 Cell None Read & Write 0 0 Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell 0 0 Cell None Read & Write This parameter is valid only when "EDGE" in Read & Write 0 0 Cell None Read & Write 0 0 Cell None Read & Write Permit Permit Cell None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved OUTDOOR_CEL OUTDOOR_ L CELL Cell 283 283 BTS 565 565 BTS 268 268 BTS 535 535 BTS None The value of this parameter must be greater The value of this parameter must be greater The value of this parameter must be smaller The value of this parameter must be smaller Read & Write Read & Write Read & Write Read & Write Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Read & Write None None Cell None Read & Write None None None None Read & Write None None Cell None Read & Write 3 3 Cell None Read & Write None None Cell None Read & Write NO NO MSC 80 80 Cell None Read & Write This parameter is valid only when "SDDYN" in Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 255 255 Cell The parameter value correspond s to the Read & Write 30 30 Cell None Read & Write 1 1 Cell None Read & Write 4 4 Cell None Read & Write YES YES BTS 430 430 BTS None The value of this parameter must be smaller Read & Write Read & Write 2G 2G Cell None Read & Write 30 30 Cell None Read & Write COMMON COMMON Cell None Read & Write NO NO Cell 500 500 BTS None The value of this parameter must be smaller Read & Write Read & Write -100 -100 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 800 800 BTS The value of this parameter must be greater Read & Write -200 -200 BTS None Read & Write NO NO BTS None Read & Write 20 20 Cell None Read & Write 1 1 Cell None Read & Write 80 80 TRX None Read & Write None None BSC6900 None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NULL NULL IP path None None None BTS None None None BTS None None None BTS None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) IP path Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write 80 ATERCON 80 SL None Read & Write 80 ATERCON 80 SL None Read & Write None None Cell None Read & Write None None BSC6900 None Read & Write None None BTS None Read & Write 90 90 BSC None Read & Write 90 ATERCON 90 SL None Read & Write 90 90 BSC None Read & Write QUICK_HO_ QUICK_HO_NC NCELL_TYP ELL_TYPE_A E_A Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write CAPABILITY CAPABILITY Cell None Read & Write 0 0 Cell None Read & Write OFF OFF Cell None Read & Write 100 100 Cell None Read & Write None None Cell None Read & Write YES YES Cell None Read & Write NO NO MSC None Read & Write 10 10 Cell 5 5 IP path None the Read & Write When value of "PATHCHK " in "ADD IPPATH" is Read & Write YES YES BSC None Read & Write MODE2 MODE2 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved MODE2 MODE2 BTS None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None None None None None None None 10 10 BTS None 10 10 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO SCTP link None Read & Write Y NO NO SCTP link None Read & Write Y CRC32 CRC32 SCTP link None Read & Write Y Not involved The services are interrupted SCTP link until the The services are interrupted SCTP link until the The services are interrupted SCTP link until the None None None None None None None None None None BTS None None None Board None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Physical channel None Read & Write None None None None Read & Write None None BTS None Read & Write YES YES MSC None Read & Write YES YES MSC None Read & Write YES YES MSC None Read & Write YES YES MSC None Read & Write YES YES MSC None Read & Write YES YES MSC None Read & Write SYSTEMOPT SYSTEMOP T MSC YES YES Cell None Read & Write This parameter is valid only when "QTRUPW Read & Write 100 100 BSC None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 200 200 BSC None 1000 1000 BSC None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved TCHFR TCHFR Physical channel None None None None None None Read & Write Y N (No impact on the UE in Cell None Read & Write idle mode) N (No impact on the UE in Cell None the Read & Write idle mode) When value of N (No "OPMODE" impact on of "BLK the UE in E1/T1 link ACIC" is Read & Write idle mode) None Channel Less than 1 minute Not involved Not involved Not involved Not involved Not involved Not involved None None None None YES YES MSC None YES YES MSC None NOTSENDING NOTSENDI NG MSC None NOTSENDING NOTSENDI NG MSC None YES YES MSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES MSC None None None IP logical port None 22 22 Cell None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write Y BTS Less than 5 minutes None None BSC6900 UNSUPPORT None Cell None Read & Write This parameter is valid only when "GPRS" is Read & Write NO NO BSC None Read & Write None ERR_PFM_ 5E6 Board None Read & Write None None None None Read & Write PTP PTP BTS None Read & Write Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None BTS None Read & Write Y BSC6900 N (No impact on the UE in Not Read & Write idle mode) involved Less than 10 minutes Not involved 255 255 BTS This parameter is valid only when "AntiTheftAl Read & Write None None BSC6900 255 255 BTS None Read & Write This parameter is valid only when "AntiTheftAl Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None None BTS 0 0 BTS None The value Read & Write range of this parameter varies with Read & Write The value range of this parameter varies with Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None None None 30 30 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved None None MSC None None None NSE None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC None None None None None NONE NONE BSC None None None BSC6900 None None None BTS None None None BTS None None None BSC6900 None 0 None None None 0 None None None YES YES Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Read & Write INACTIVE INACTIVE BTS None Read & Write None None BSC6900 L0_FORBID- 45 0&L1_FORBID0&L2_FORBID0&L3_FORBID0&L4_FORBID- 45 L0_FORBID- Cell 0&L1_FORB ID0&L2_FORB IDCell None Read & Write This parameter is valid only when "PWRBCD Read & Write None Read & Write None None BSC6900 None Read & Write 100 100 None None Read & Write NO NO Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None 15 IP/HDLC:15 BSC6900 None 15 IP/HDLC:15 BSC6900 None 15 IP/HDLC:15 BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 15 IP/HDLC:15 BSC6900 None Read & Write 25 25 BSC6900 None Read & Write 25 25 BSC6900 None Read & Write 25 IP/HDLC:25 BSC6900 None Read & Write 25 IP/HDLC:25 BSC6900 None Read & Write 25 IP/HDLC:25 BSC6900 None Read & Write 25 IP/HDLC:25 BSC6900 None Read & Write 50 50 BSC6900 None Read & Write 50 50 BSC6900 None Read & Write NO NO Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None NO NO None None Read & Write Y BTS N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None BSC6900 None Read & Write None None BSC None Read & Write 4 4 Cell 6 6 Cell None Read & Write This parameter, together with "BANTIME" Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Ethernet port None Not Read & Write involved Not involved Not involved 5 Ethernet 5 port NO NO TRX None Read & Write This parameter is valid only when "BSCDynS Read & Write None None BSC None Read & Write NOTSUPPORT NOTSUPPO RT BTS None Read & Write 6dB 6dB Cell None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (Impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 10 10 Cell None Read & Write 3 3 Cell None Read & Write 0 0 Cell None Read & Write 255 255 BSC None Read & Write UNAVAILABLE UNAVAILAB LE SCTP link None Read & Write None None 100 When the100 BSC6900 interface type is Abis, transmission type is the BSC6900 When IP, interface type is Abis and transmission BSC6900 None the Read & Write When value of "ITFT" in "ADD TRMMAP" Read & Write When the value of "ITFT" in "ADD TRMMAP" Read & Write 100 100 BSC6900 None Read & Write 5 5 Cell None Read & Write 90 90 TRX None Read & Write 50 50 BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (Impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None When the interface type is Abis, transmission type is the BSC6900 When IP, interface type is Abis and transmission BSC6900 When the value of "ITFT" in "ADD TRMMAP" Read & Write When the value of "ITFT" in "ADD TRMMAP" Read & Write 50 50 BSC6900 None 3 3 Cell None None ON BSC6900 none N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 45000 45000 None None Read & Write Y BSC6900 Less than 5 minutes 30000 30000 None None Read & Write Y BSC6900 Less than 5 minutes 1300 1300 None None Read & Write Y BSC6900 Less than 5 minutes 500 500 None None Read & Write Y BSC6900 Less than 5 minutes 8200 8200 None None Read & Write Y BSC6900 Less than 5 minutes 100 100 None None Read & Write Y BSC6900 Less than 5 minutes 5000 5000 None None Read & Write Y BSC6900 Less than 5 minutes 1500 1500 None None Read & Write Y BSC6900 Less than 5 minutes 100 100 None None 95 95 Board 95 85 Board None None BSC6900 4BURST 4BURST Cell None None None None None BTS None None BTS None None BTS None None None None BTS Transmissi on resource group None Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) The value range of N (No this impact on parameter the UE in varies with Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) BSC6900 Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes ON ON BSC6900 None NO NO MSC None None None BTS None 4 4 Cell None NT14_5K0&NT12K1&NT6K1&T14_4K0&T9_6K- 4 NT14_5K- 4 Cell 0&NT12K1&NT6K1&T14_4K0&T9_6KCell None None NOLIMIT NOLIMIT BSC6900 None None None BSC6900 None None None BSC None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not Involved Not involved Not involved Not involved Not involved None 2 If the 2 BTS coverage area in the underlaid subcell is Cell None Read & Write None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None None BTS None None BTS None The value Read & Write range of this parameter varies with Read & Write The value range of this parameter varies with Read & Write None None BTS None Read & Write None None None If "Power System Type" is "SC48200", the BTS BTS 580 580 BTS 450 450 BTS None The value of this parameter must be greater The value of this parameter must be greater The value of this parameter must be greater Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 580 580 BTS The value of this parameter must be greater N (No impact on the UE in Not Read & Write idle mode) involved Not involved 0 0 Cell None 1000 1000 Cell None Read & Write Y Cell N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None SCCP None None None BSC6900 None INACTIVE INACTIVE BTS None None None Ethernet port None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BSC None None BSC None None BSC This parameter is required when the Connection Read & Write This parameter is required when the Connection Read & Write This parameter is required when the Connection Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None None 2 Cell Current BFD 3 session None. 3 None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 1 minute Not involved Not involved Not involved Not involved None OFF BSC6900 None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BTS None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None None None Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BTS None Read & Write None None BTS None Read & Write YES YES MSC None Read & Write None DEFAULTP ORT BSC6900 None Read & Write 1 1 None None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None DISABLE DISABLE BTS None NO NO Cell None None None BSC6900 None None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None Read & Write NO NO MSC None Read & Write YES YES Cell None Read & Write NO NO Cell None Read & Write 3 3 BSC None Read & Write None None Cell None Read & Write 4 4 Cell None Read & Write 4 4 Cell None Read & Write 4 4 Cell None Read & Write NO NO BTS 3 3 Cell 14 14 Cell None Read & Write This parameter is valid only when "PWRCTR Read & Write This parameter is valid only when "PWRCTR Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 14 14 Cell 16 16 Cell 16 16 Cell This parameter is valid only when "PWRCTR Read & Write This parameter is valid only when "PWRCTR Read & Write This parameter is valid only when "PWRCTR Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None NSVC None 5 5 BSC UNSUPPORT None Cell The recommend ed value is 20 when 20 HUAWEI I Cell 3 3 Cell 16 16 Cell 16 16 Cell None This parameter is valid only when "GPRS" is This parameter is valid when "FRINGEH This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR 0 0 Cell 18 18 Cell None This parameter is valid only when "PWRCTR Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) NSVC Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 18 18 Cell 2 2 Cell 3 3 Cell 3 3 Cell 3 3 Cell 4 4 Cell 15 15 Cell 2 2 Cell 2 2 Cell This parameter is valid only when "PWRCTR The setting of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write 35 35 Cell None Read & Write 40 40 Cell None Read & Write 90 90 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 Cell 2 The 2 Cell recommend ed value is 8 when DTX is 8 disabled. Cell 60 60 Cell This parameter is valid when "PWRCTR The setting of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write 2 2 Cell 4 4 Cell 8 8 Cell None Read & Write This parameter is valid only when "PWRCTR Read & Write This parameter is valid only when "PWRCTR Read & Write 100 100 BSC 0 0 Cell 0 0 Cell 2 2 Cell 5 5 Cell None This parameter is valid when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 2 2 Cell 10 10 Cell 55 55 Cell This parameter is valid when "PWRCTR Read & Write This parameter is valid when "PWRCTR Read & Write This parameter is valid only when "BQHOEN" Read & Write 60 60 Cell None Read & Write 55 55 Cell 3 3 Cell 3 3 Cell 20 20 Cell 20 20 Cell 1 1 Cell 6 6 Cell 3 3 Cell None This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 Cell 5 5 Cell 55 55 Cell 45 45 Cell 28 28 Cell This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write 90 90 Cell None Read & Write 0 0 Cell None Read & Write 5 5 Cell 12 12 Cell 17 17 Cell 25 25 Cell 23 23 Cell None The setting of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 31 31 Cell 63 63 Cell 12 12 Cell 18 18 Cell None None BTS None None BTS The setting of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter depends on "Board The setting of this parameter depends on "Board Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write None None BTS None Read & Write CS2 CS2 Cell None Read & Write MCS6 MCS6 Cell DAS6 DAS6 Cell UNFIXED UNFIXED Cell None Read & Write This parameter is valid only when "EGPRS2A Read & Write This parameter is valid only when "EGPRS2A Read & Write UNFIXED UNFIXED Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved UNFIXED UNFIXED Cell None Read & Write YES YES Cell None Read & Write NO NO Cell None Read & Write 2400 2400 Cell None Read & Write 10 10 Cell None Read & Write 5 5 Cell None Read & Write 5 5 Cell None Read & Write 5 5 Cell None Read & Write 2 2 Cell None Read & Write 2 2 Cell None Read & Write OPEN None None 30 30 Cell None Read & Write This parameter is valid only when "PWRBCD Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCCP When the value of "SPDF" in "ADD N7DPC" is Read & Write Y BSC6900 Less than 10 minutes None None SCCP None None None E1/T1 link None 0 0 E1/T1 link None None None BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCCP None Not Read & Write involved Not involved Not involved None None SCCP None None BSC 72 72 Cell 1 1 Cell 1 1 Cell 1 1 Cell Not Read & Write involved N (No impact on DPX of Iurthe UE in g type Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 60 IP/HDLC:60 BSC6900 None Read & Write 60 IP/HDLC:60 BSC6900 None Read & Write 60 IP/HDLC:60 BSC6900 None Read & Write 60 IP/HDLC:60 BSC6900 None Read & Write 80 80 BSC6900 None Read & Write 80 80 BSC6900 10 10 BTS 3 3 BTS 2 2 BTS None This parameter is valid only when "BAKPWR This parameter is valid only when "BAKPWR This parameter is valid only when "BAKPWR Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES Cell None 4 4 Cell None INACTIVE INACTIVE BTS None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None PPP link None None None MP link None 48 48 SCTP link None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved 0 Ethernet 0 port None None None BSC6900 None 0 0 BTS None 180 180 BSC None None None None None None None None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N(No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None Board None None BSC 15 15 BSC NO None BSC6900 None None None None This parameter is valid only when "IDXTYPE" Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved None None IP route Current BFD session None Not Read & Write involved Not involved Not involved None None None None None IP route None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None IP route None None None IP route None None None E1/T1 port None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None 85 E1/T1 port None The value Read & Write of DTLOADT HRED 85 Cell must be set Read & Write YES YES Cell None None BTS None The setting Read & Write of this parameter depends on "Board Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write OFF OFF Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved FULL FULL BTS None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write 20 20 Cell None Read & Write 20 20 BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None 20 20 Cell None LEVEL0 LEVEL0 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved 2 2 Cell None Read & Write YES YES Cell None Read & Write NOTSUPPORT NOTSUPPO RT Cell None Read & Write None None None None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None None None None None None None Channelize d optical port None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None None None BTS None None IP path Read & Write Y N (No impact on the UE in None the Read & Write idle mode) When value of N (No "PATHCHK impact on " in "ADD the UE in IPPATH" is Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved 3 3 Cell A 3G neighboring cell can be added into the Read & Write YES 30 1. For a 30 Cell 900/1800 MHz CoBCCH cell, it is Cell None Read & Write None Read & Write 2147483646 2147483646 BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None BSC6900 4 4 Cell 5 5 Cell 10 10 Cell None This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO None Cell 4 4 Cell 6 6 Cell 1 1 Cell 4 4 Cell 1 1 Cell 6 6 Cell This parameter is valid only when "GPRS" is This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS None None None YES YES Cell NO None Cell 16 16 Cell 7 7 Cell Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "GPRS" is Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write 15 15 Cell None Read & Write OFF OFF MTP3 link None Read & Write None ERR_PFM_ 1E5 Board None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None NO NO Cell None Priority4 Priority4 Cell None NO NO BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None 7 7 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write NO NO BTS None Read & Write None A5/0-1&A5/10&A5/2-0&A5/30&A5/4-0&A5/50&A5/6-0&A5/7-0 None A5/0-1&A5/1- None 0&A5/20&A5/30&A5/40&A5/5Cell None Read & Write None Read & Write AUTO AUTO BSC6900 None Read & Write None None BSC6900 None Read & Write NO NO BSC None Read & Write None None BSC6900 None None None the Read & Write When value of "OPMODE" of "BLK E1/T1 link ACIC" is Read & Write None None PBCIC None None BSC 0 0 BTS None The setting Read & Write of this parameter must meet the value Read & Write The of this parameter must be greater Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC The setting of this parameter must meet the Read & Write N (No impact on the UE in Not idle mode) involved Not involved None None BTS None None None None None None None When "BSCDynS witchTrxPA Allow" is BSC set to YES, When the value of "OPMODE" of "BLK E1/T1 link ATERE1T1 When the value of "OPMODE" of "BLK E1/T1 link AE1T1" is Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None None None BSC6900 ENABLED ENABLED BSC6900 70 70 Cell Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "UTOOTRA Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved OFF OFF Cell None ON ON Cell 5 5 Cell Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "IUOTP" in Read & Write idle mode) Cell Less than 10 minutes Not involved Not involved Not involved Not involved 5 5 Cell 20 20 Cell This parameter is valid only when "IUOTP" in Read & Write This parameter is valid only when "UTOOTRA Read & Write ON ON BSC None Read & Write ON ON BSC 80 80 Cell None Read & Write This parameter is valid only when "UTOOTRA Read & Write YES None Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCCP None None SCCP 63 63 Cell None Negotiation Read & Write with the peer network element is Read & Write This parameter is valid only when "IUOTP" in Read & Write Not involved Not involved Not involved None ON Board None None None BSC6900 None NO NO Cell None Not involved N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved O5E4_R1E4 O5E4_R1E4 Board None OFF OFF Board None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None 0 0 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None 2147483646 2147483646 BSC6900 None 3000 3000 Cell None CLOSE CLOSE MSC None 0 0 BTS None None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write None ONE_BY_O NE BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None Cell None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0.02 None None 0.004 None None If "Sensor Type of External Analog 1" is set to If "Sensor Read & Write Type of External Analog 1" is set to Read & Write CURRENT None None 100 None None 0 None None 0.02 None None 0.004 None None None If "Sensor Type of External Analog 1" is set to If "Sensor Type of External Analog 1" is set to If "Sensor Type of External Analog 2" is set to If "Sensor Type of External Analog 2" is set to Read & Write Read & Write Read & Write Read & Write Read & Write CURRENT None None 100 None None 0 None None 0.02 None None 0.004 None None None If "Sensor Type of External Analog 2" is set to If "Sensor Type of External Analog 2" is set to If "Sensor Type of External Analog 3" is set to If "Sensor Type of External Analog 3" is set to Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved CURRENT None None 100 None None 0 None None 0.02 None None 0.004 None None None If "Sensor Type of External Analog 3" is set to If "Sensor Type of External Analog 3" is set to If "Sensor Type of External Analog 4" is set to If "Sensor Type of External Analog 4" is set to Read & Write Read & Write Read & Write Read & Write Read & Write CURRENT None None 100 None None 0 None None None If "Sensor Read & Write Type of External Analog 4" is set to If "Sensor Read & Write Type of External Analog 4" is set to Read & Write NoExclusive NoExclusive Cell None Read & Write None 25 Cell 30 30 Cell 30 30 Cell None. Read & Write This parameter is valid only when "PWRBCD Read & Write This parameter is valid only when "PWRBCD Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved CLOSE CLOSE Cell None YES YES BTS None EM0 EM0 Cell None 60sec 60sec Cell None TYPE1 TYPE1 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Normal_cell Normal_cell Cell None Read & Write Y Cell Less than 1 minute SEND SEND Cell If "UPEXTTB FINACTDE LAY" in the "SET Read & Write 8 8 Cell None Read & Write NO NO Cell None Read & Write NO NO Cell None Read & Write None None BTS None Read & Write OFF None Cell None Read & Write 30 30 Cell None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved SOFTWARE_C ONTROL SOFTWARE _CONTROL BSC6900 None Read & Write None None None None Read & Write 0 0 Cell NO NO BTS None If this parameter is set to "YES", the following Read & Write Read & Write OFF OFF Board None Read & Write None None Ethernet port None Read & Write CLOSE CLOSE BTS None Read & Write 55 75 TRX None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved 0 0 PPP link None 0 0 MP group 0 IP logical 0 port Read & Write Y N (No impact on the UE in None This index Read & Write idle mode) can N (No correspond impact on with any the UE in threshold Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved None None BSC6900 None N (No impact on the UE in Not Read & Write idle mode) involved Not involved 0 Ethernet 0 port None Not Read & Write involved Not involved Not involved None None BSC6900 None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BTS None 85 85 TRX None Read & Write Y BTS N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes 16bit 16bit PPP link None Read & Write Y PPP link 16bit 16bit MP link None ON None None 535 535 BTS None The value of this parameter must be smaller None None Cell None None None Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Cell None Read & Write 0 0 Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write 10 10 Cell None Read & Write 2 2 Cell 0 0 Cell None Read & Write This parameter is valid only when the ""INTERRA Read & Write 0 0 Cell None Read & Write 8 8 Cell None Read & Write RSCP RSCP Cell None Read & Write 6 6 Cell None Read & Write 10 10 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Read & Write NO 4 For the 4 None doubletransceiver BTS and NGBTS, the Cell None Read & Write None Read & Write 2 2 Cell None Read & Write 4 4 Cell None Read & Write 8 8 Cell None Read & Write 16 16 Cell None Read & Write 32 32 Cell None Read & Write 64 64 Cell None Read & Write 128 128 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO_FH NO_FH Cell None None None BSC6900 None Read & Write Y Cell N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None BSC6900 None None None BSC6900 None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 csv csv BSC6900 6 6 Cell None None BSC6900 NO NO Cell INACTIVE INACTIVE BTS 80 80 BTS 0 0 BTS 0 0 BTS ENABLE ENABLE BTS Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "PWRCTR Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 900 900 BTS None 900 900 BTS None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved FIX_16K_ABIS OFF FIX_16K_AB IS When tight BTS frequency reuse is used, the recommend Cell None Read & Write This parameter is valid when "FHMODE" Read & Write OFF OFF Cell None Read & Write 4500 4500 BSC None Read & Write 1000 1000 BSC None Read & Write None ON Ethernet port None Read & Write Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved ON ON PPP link None ON ON MP group None ON ON IP logical port None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved ON ON Ethernet port None Not Read & Write involved Not involved Not involved None None BTS 10 10 Cell 10 10 Cell 10 10 Cell 10 10 Cell 10 10 Cell 10 10 Cell 10 10 Cell 10 10 Cell 0 0 Cell None This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA This parameter is valid only when "RXQCKFA Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write OPEN OPEN BSC None Read & Write 5 5 Cell None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write None None None None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None none BSC6900 None None None None None None None None None OPEN OPEN BSC None 15 15 MSC None 0 0 Board None Close Close BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Cell None YES YES Cell None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None 2 2 None None None None Cell None None None Cell None None None Cell None 256 None MP group None None None BSC6900 None 0 0 Cell None YES YES Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None BSC6900 None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None TRX None None None Cell None None None Cell None None None Cell None None None Cell None None None Cell None None None Cell None None None Cell None None None Cell None None None Cell None Read & Write Y Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Services are disrupted when the Read & Write BCCH Cell Less than 1 minute Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write NO NO Cell None Read & Write 36671 36671 Cell None Read & Write None None BTS None Read & Write 25 25 Cell None Read & Write None None Cell None Read & Write Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH Services are disrupted when the BCCH N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved LOOSE LOOSE TRX None Read & Write None None BSC None Read & Write MaximumMeanV MaximumMe alue anValue Cell None Read & Write YES YES Cell None Read & Write Shall_Use Shall_Use Cell None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None None None BTS None Read & Write Y BTS N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None BTS None TXT TXT BSC6900 None None Adjacent node Read & Write Y N (No impact on the UE in None The factor Read & Write idle mode) table index N (No is impact on configured the UE in by setting Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 20 20 Cell 5 5 Cell 4 4 Cell 10 10 Cell 1 1 Cell 6 6 Cell None This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 20 20 BSC6900 None Not Read & Write involved Not involved Not involved 15 15 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 1 1 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None Not Read & Write involved Not involved Not involved 5 5 BSC6900 None Not Read & Write involved Not involved Not involved 0 0 BSC6900 None 110 110 BSC None 10 10 BSC None A0 A0 Board None 12 12 Cell None None None BSC6900 None 40 40 BSC6900 None None ON BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write NO NO Cell None Read & Write OFF OFF BSC None Read & Write DEG DEG None None Read & Write YES YES Cell None Read & Write YES YES Cell None Read & Write None None BSC6900 None Read & Write 20 20 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None NO NO Cell None 2dB 2dB Cell None NONGPRS NONGPRS Physical channel None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Not involved PS service of the cell will be interrupt until this Not involved Not involved Not involved Not involved Not involved Not involved DB110 DB110 Cell None Read & Write 10sec 10sec Cell None Read & Write 5 5 Cell None Read & Write 10db 10db Cell None Read & Write GPS GPS BTS None Read & Write 10 10 None None Read & Write NO NO Cell None Read & Write None None BTS None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None None None BSC None 0 0 BTS None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 10 minutes Not involved Not involved Not involved Not involved None None None None Transmissi on resource group None Transmissi on resource group None Not Read & Write involved Not involved Not involved None LAC_CI Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved 80 80 BSC6900 10 10 BSC 3 3 Cell SUPPORT SUPPORT Cell Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid impact on when the UE in "MEASURE Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Ethernet port None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved 255.255.255. 255.255.255.255 255 BTS None NO NO BSC 20 20 Cell Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "HOCTRLS Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved 5 5 Cell 4 4 Cell 10 10 Cell 6 6 Cell This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS Read & Write Read & Write Read & Write Read & Write NO NO BTS None Read & Write NO None NO None 1000(applica BTS tion type is M3UA), 5000(applica tion type is SCTP link None Read & Write Read & Write None None BTS 2 2 Cell 3 3 Cell None Read & Write This parameter is valid only when "HOCTRLS Read & Write This parameter is valid only when "HOCTRLS Read & Write 65535 None BTS None Read & Write 65535 None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved DCS1800 DCS1800 BSC 1 1 Cell None Read & Write This parameter is valid only when "HIGHPRIU Read & Write NO NO BSC None Read & Write NO NO Cell None Read & Write YES YES BTS None Read & Write YES YES Cell UNSUPPORT None Cell SysOpt SysOpt Cell None Read & Write This parameter is valid only when "GPRS" is Read & Write This parameter is valid only when "IUOTP" in Read & Write NO NO BSC None Read & Write 10 10 Cell None Read & Write 0 0 Cell None Read & Write None None Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell HOALGORITHM HOALGORI 1 THM1 Cell NO NO Cell 3 3 Cell 3 3 Cell 50 50 Cell 8 8 Cell 8 8 Cell 35 35 Cell 3 3 Cell None The value of this parameter must be the same as When parameter ""Quick handover enable"" is "Handover Direction Forecast Statistic Times" >= "Handover Direction Forecast Statistic Times" >= This parameter is valid only when "QUICKHO This parameter is valid only when "BET3GHO This parameter is valid only when "BET3GHO This parameter is valid only when the following This parameter is valid only when "QUICKHO Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write None None Cell 68 68 Cell None Read & Write This parameter is valid only when "QUICKHO Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 32 32 Cell Pre_2G_CellThr Pre_2G_Cell es Thres Cell 5 5 Cell This parameter is valid only when "LOWRXL Read & Write This parameter is valid only when the ""INTERRA Read & Write This parameter is valid only when "IUOTP" in Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None None None Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None Cell 25 25 Cell None Read & Write This parameter is valid only when "HOOPTSE Read & Write OFF OFF BSC None Y N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 1 minute Not involved Not involved Not involved Not involved 0 0 Cell None Read & Write Y Cell Less than 1 minute None None Cell NO_FH NO_FH TRX None Read & Write This parameter depends on "FHMODE" in "SET Read & Write 63 63 Cell None Not involved If traffic handover fails after the modificatio N (No impact on the UE in Read & Write idle mode) Not involved Not involved Cell Less than 1 minute Not involved Not involved 15 15 BSC6900 50 50 Cell None Read & Write This parameter is valid only when the following Read & Write YES YES MSC 10 10 Cell 10 10 Cell 4 4 Cell None This parameter is valid only when "INTERRA This parameter is valid only when "INTERRA This parameter is valid only when "QUICKHO Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved SINGLEHOST SINGLEHO ST SCCP SINGLEHOST SINGLEHO ST BTS 25 25 Cell 50 50 Cell None the Read & Write Y When BTS or cell is activated,th e host type Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "QUICKHO Read & Write idle mode) BSC6900 Not involved The services are interrupted until the BTS Less than 5 minutes Not involved Not involved Not involved Not involved NONE NONE Cell None Read & Write Y Cell Less than 1 minute None None Cell None Read & Write Y Cell Less than 1 minute None None BTS 1 1 Cell None Read & Write This parameter is valid only when "GRADEAC Read & Write NO NO BTS 440 440 BTS None The value of this parameter must be smaller Read & Write Read & Write NO NO Cell None Read & Write YES YES Cell None Read & Write YES YES Cell None Read & Write Shall_Use Shall_Use Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Cell None None None BTS OFF OFF Cell None None BTS Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid impact on when the UE in "FHMODE" Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) Cell Less than 1 minute Not involved Not involved Not involved Not involved Not involved Not involved None None Current BFD session 40 40 BTS None The value of this parameter must be greater Read & Write Read & Write None None BTS None Read & Write ENABLE ENABLE BTS None Read & Write OPEN None Board None Read & Write 80 None Board None Read & Write 10 None Board If "APMU Board Type" is "SC48200", 1000 the BTS 800 If "APMU 800 BTS Board Type" is "SC48200", 0 the BTS 100 100 BTS None The value of this parameter must be greater The value of this parameter must be greater The value of this parameter must be smaller The value of this parameter must be smaller Read & Write Read & Write Read & Write Read & Write Read & Write 15 15 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 720 720 SCCP None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write 90 90 SCCP 4 4 Cell 10 10 Cell None Read & Write This parameter is valid only when "IBCASOF Read & Write This parameter is valid only when "IBCASOF Read & Write NO NO Cell None Read & Write 4 4 Cell None Read & Write 4 4 Cell None Read & Write 0 0 Cell None Read & Write 4 4 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO 7 Set this 7 Cell parameter to YES for the neighboring cell with co- Cell None Read & Write None Read & Write 0 0 Cell None Read & Write OFF OFF Cell None Read & Write OFF OFF Cell None Read & Write 10 10 Cell None Read & Write 2 2 Cell None Read & Write 13 13 Cell None Read & Write 10 10 Cell None Read & Write YES YES Cell None Read & Write 4 4 BSC None Read & Write 0 0 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Cell None Read & Write 0 0 Cell None Read & Write 0 0 Cell None Read & Write 4 4 Cell None Read & Write 0 0 Cell None Read & Write 20 20 Cell None Read & Write NO NO Cell None Read & Write 0 0 Cell None Read & Write 7 7 Cell None Read & Write 9 9 Cell None Read & Write 4 4 Cell None Read & Write 0 0 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 8 It is 8 BSC recommend ed that you set the path 15 loss offset of Cell None Read & Write None Read & Write 6 6 Cell None Read & Write 4 4 Cell None Read & Write 110 110 Cell None Read & Write 1 1 Cell None Read & Write NO NO Cell None Read & Write OFF OFF Cell None Read & Write 20 20 Cell None Read & Write UNDER UNDER Cell None Read & Write NO NO Cell None Read & Write 5 5 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO ENABLE NO Cell For SingleRAN BTS, the recommend ed value is BTS 64 64 IP path N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None the Read & Write idle mode) When value of N (No "PATHCHK impact on " in "ADD the UE in IPPATH" is Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved 22 22 BSC None Not Read & Write involved Not involved Not involved 20 20 BSC None Not Read & Write involved Not involved Not involved 18 18 BSC None None None BSC6900 None None None BSC6900 None None None BTS None 84 84 Board None None None None 2 2 Cell None This parameter is one of the conditions Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BSC6900 None None None Cell None None None BSC None None None Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None None None None None None None None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None Subsystem None Not Read & Write involved Not involved Not involved None None BSC None YES YES Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None IP route None Read & Write Positive Positive BTS None Read & Write 0 0 BTS None Read & Write YES YES None 1 1 Cell None Read & Write This parameter is valid only when "QUICKHO Read & Write None None BSC None Read & Write 5000 5000 Cell None Read & Write NO NO Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Cell None NO NO Cell None 4 4 Cell None 2 2 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Cell NO NO Cell 0 0 Cell None Read & Write This parameter is valid only when "IUOTP" in Read & Write This parameter is valid only when "IMMASST Read & Write NO NO BSC6900 None Read & Write 10 10 Cell None Read & Write None None BSC None None 10000 10000 4 4 3 3 360 360 None Read & Write This parameter is valid only when Not Subsystem "IDXTYPE" Read & Write involved N (No impact on the UE in Cell None Read & Write idle mode) N (No impact on the UE in BSC6900 None Read & Write idle mode) N (No impact on the UE in BSC6900 None Read & Write idle mode) N (No impact on the UE in Cell None Read & Write idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes NO NO BTS 8 8 Cell 10 10 Cell CELLCAPCLAS CELLCAPCL S ASS BSC OPEN None Board 25 25 Cell 12 12 Cell 8 8 TRX 1 1 Cell 0 0 Cell 2 2 Cell None None BSC None This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS Set when Allow Info Exchange at Iur-g is set to Yes Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "HOCTRLS Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "HOCTRLS Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Cell YES YES Cell This parameter is valid only when "IUOTP" in Read & Write This parameter is valid only when "IUOTP" in Read & Write None None BSC6900 None Read & Write None None BSC6900 NO NO Cell 10 10 Cell 5 5 Cell 90 90 Cell None This parameter is valid only when "IUOTP" in This parameter is valid only when "INNLOAD This parameter is valid only when "INNLOAD This parameter is valid only when "OUTLOAD Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Degree Degree Cell None Read & Write Y BTS N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved NO NO Cell This parameter is valid only when "SIGCHAN Read & Write N (No impact on the UE in Not idle mode) involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BSC None Not Read & Write involved Not involved Not involved None None BTS None None 60 Cell 67 67 Cell None Inter-layer HO threshold of the serving cell = "Inter- INTBANII INTBANII Cell In densely populated urban areas, the 4 recommend Cell None 15 15 Cell 2 2 Cell 3 3 Cell None This parameter is valid only when "HOCTRLS This parameter is valid only when "INTERFH This parameter is valid only when "INTERFH Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES Cell None Read & Write YES YES Cell 110 110 Cell 105 105 Cell 98 98 Cell 92 92 Cell 87 87 Cell 85 85 Cell None The setting of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write 3 3 BSC6900 None Read & Write 20 20 Cell None Read & Write NO NO Cell None Read & Write 80 80 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Cell None Read & Write 20 20 BSC None Read & Write 49 49 BSC None Read & Write 5 5 BSC None Read & Write 60 60 BSC None Read & Write 91 91 BSC None Read & Write 10 10 BSC None Read & Write NO NO Cell OFF OFF BSC None Read & Write This parameter is valid only when the ""INTERRA Read & Write 72 72 BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 BSC6900 None 1 1 Cell None Ethernet Read & Write Y port N (No impact on the UE in Not Read & Write idle mode) involved Not involved The loopback keeps interrupting the Not involved 30 30 Cell This parameter is valid only when "IUOTP" in Read & Write None None Cell None Read & Write 10000 10000 Cell YES NO YES hotCell In the spot areas, densely populated urban areas, Cell None Read & Write This parameter is valid only when "HOCTRLS Read & Write None Read & Write 10000 10000 Cell None Read & Write None None BSC None Read & Write 25 25 BSC None Read & Write 10 10 BSC None Read & Write 30 30 BSC None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes 30 None BSC6900 None Read & Write None None BSC6900 None Read & Write NO NO Cell None Read & Write None None None None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None NSE None Not Read & Write involved Not involved None None NSE None 255.255.255. 255.255.255.255 255 BTS None None None None None None IP path None The "IPADDR" in "ADD IPPATH" Not can not be Read & Write involved Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) NSE Not involved Services are interrupted unless the NSVL Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None Ethernet port None None BSC None None BSC None None BTS None None BSC None None BTS None None BSC None None BSC 10 Ethernet 10 port 5 Ethernet 5 port Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None The setting Read & Write idle mode) of this N (No parameter impact on cannot be the UE in duplicate Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) The value of this N (No parameter impact on cannot be the UE in the same Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved UDP/IP_HC UDP/IP_HC PPP link None UDP/IP_HC UDP/IP_HC MP group None Read & Write Y BSC6900 N (No impact on the UE in Not Read & Write idle mode) involved Interrupt the service until negotiate successfull Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None Ethernet port None None None None IP_OVER_FE/G IP_OVER_F E E/GE BTS None This parameter is valid only when "SERVICE Read & Write Y Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved BTS Less than 5 minutes None None BTS None NO NO BTS None None NO BSC6900 None NO NO Cell None None BTS None None BTS None If the redundancy configuratio n mode is not If the redundancy configuratio n mode is not Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO BTS None NO NO BTS None YES YES None None Cell None Transmissi on resource group None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved YES YES Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved NO NO TRX None None None BSC None None None BTS None NO NO Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 1 minute Not involved Not involved Not involved Not involved Not involved Not involved None None NSE None None None IP Path None NO NO BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None None None Read & Write NO NO BTS NO NO BTS None Read & Write This parameter can be set to YES only when Read & Write NO NO BSC None Read & Write None None None None Read & Write NO NO None None Read & Write NO NO BTS None Read & Write NOT_CONFIG NOT_CONFI G BTS None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write 65535 65535 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write None None IP route NONE NONE TRX None Read & Write This parameter is valid only when "IUOTP" in Read & Write CONVERT0 CONVERT0 Cell 8 8 Cell 10 10 Cell None The following condition must be met: The following condition must be met: Read & Write Read & Write Read & Write Normal_cell Normal_cell Cell None Read & Write None OFF Board None Read & Write Character_S Character_String tring None None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None SBS 155 Board None Read & Write Y BSC6900 None SBS 155 Board None Read & Write Y BSC6900 None 16byte Board None Read & Write Y BSC6900 Not involved If the mode is not consistent, will interrupt If the mode is not consistent, will interrupt If the mode is not consistent, will interrupt None OFF Board None Character_S Character_String tring None None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved None SBS 155 Board None Read & Write Y BSC6900 None SBS 155 Board None Read & Write Y BSC6900 None 16byte Board None None OFF Channelize d optical port None None None None None None None Channelize d optical port None None None None None None None Channelize d optical port None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved If the mode is not consistent, will interrupt If the mode is not consistent, will interrupt If the mode is not consistent, will interrupt Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None SPACE Board None None None BTS None Optical Read & Write Y port N (No impact on the UE in Not Read & Write idle mode) involved Not involved If the mode is not consistent, will interrupt Not involved None DENY None the BTS When disorder phenomeno n is severe in the IP BSC MSP protect group None None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved None None None 0 0 Cell None Read & Write Y BSC6900 N (No impact on the UE in Not Read & Write idle mode) involved Not involved Interrupt the service until negotiate successfull 2 2 PPP link None None None Cell None None None Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved None None Ethernet port None None None Cell None None None Cell None None None Cell None None None Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None None None Cell None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None None None 2 IP logical 2 port None 4 IP logical 4 port None 25 IP logical 25 port None 3 IP logical 3 port None 8 IP logical 8 port None 3 3 Cell 3 3 Cell 20 20 BSC None are There four network layers, that is, layer 1 Lb Congestion Protection Timer 1<Lb Congestion Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 30 30 BSC CSFHHO CSFHHO BSC PSDOWN PSDOWN BSC AMRC AMRC BSC Lb Congestion Protection Timer 1<Lb Congestion If this parameter is not set to CLOSE, it value must If this parameter is not set to CLOSE, it value must If this parameter is not set to CLOSE, it value must Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCCP None None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None ON BSC6900 None Not Read & Write involved Not involved Not involved 0 Ethernet 0 port YES None Cell YES YES Cell 2 2 Cell Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "HOCTRLS Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 4 4 Cell 6 6 Cell This parameter is valid only when "HOCTRLS Read & Write This parameter is valid only when "HOCTRLS Read & Write None None None None Read & Write None None None None Read & Write None None Board None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None 10 10 BTS None 90 90 None None 70 70 None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None LAPDLNK None DIFFERENCE DIFFERENC E None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved 64K 64K MTP3 link None Read & Write 10 None None None Read & Write None None BTS None Read & Write None None None None Read & Write 35 35 BTS None Read & Write 45 45 BTS None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Board None Read & Write Y BSC6900 Not involved Interrupt the service until negotiate successfull None None BSC None Not Read & Write involved Not involved Not involved M3UA_MASTER M3UA_MAS _MOD TER_MOD BSC6900 B1111 B1111 SCCP B1111 B1111 SCCP 80 80 Cell Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None the Read & Write idle mode) When cell is a 2G N (No external impact on cell, this the UE in parameter Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved RANDOMALG RANDOMAL G MSC None Read & Write 4 4 BSC None Read & Write 100 100 BTS None Read & Write NO NO Cell None Read & Write NO NO Cell None Read & Write NO NO Cell 10 10 Cell 63 63 Cell 10 10 Cell 5 5 Cell 25 25 Cell None This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "LOADHOE This parameter is valid only when "LOADHOE This parameter is valid only when "LOADHOE Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write NO NO BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved PERMIT PERMIT Cell None Read & Write 40 40 Cell None Read & Write 60 60 Cell None Read & Write 85 85 Cell None Read & Write YES YES Cell None Read & Write None None BTS None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None MP group None None BTS None None BTS None The IP address must be in the same network The IP address must be in the same network Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Read & Write Y BTS Less than 5 minutes Read & Write Y BTS Less than 5 minutes None None NSE None Not Read & Write involved Not involved Not involved None None BSC None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BTS None None None BTS None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved None None SCTP link None Read & Write Y None None SCTP link None ON OFF BSC6900 None None None the When value of "MODE" in "ADD SCTP link SCTPLNK" Read & Write Y Read & Write Y N (No impact on the UE in Not Read & Write idle mode) involved Not involved The services are interrupted SCTP link until the The services are interrupted SCTP link until the Not involved The services are interrupted SCTP link until the None None BSC6900 None NORMMODE NORMMOD E None None 90 95 Board None 90 80 Board None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None None None This parameter determines whether SCTP link "LOGPORT Read & Write When the value of "LOGPORT FLAG" in SCTP link "ADD the Read & Write When value of "LOGPORT FLAG" in SCTP link "ADD Read & Write N (No impact on the UE in Not idle mode) involved Y 80 85 Board None Read & Write 80 70 Board None Read & Write ON ON Board None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved The services are interrupted SCTP link until the The services are interrupted SCTP link until the Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None None None Cell None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None None None None None None None None None BC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved None ON E1/T1 port None Read & Write Y Not involved When the peer end unconditio nally E1/T1 port changes None None LAPDLNK None 80 80 Cell None None None BSC None None None BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None E1/T1 port None Read & Write Y Not involved The loopback keeps interrupting E1/T1 port the None None Loopback optical port None 180 180 BSC 1 IP logical 1 port NO NO Cell NO NO BTS ON ON Cell ON NO ON Cell For EPS4815 boards, the value of this parameter is BTS NO NO BTS None None None None None IP path Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid impact on when the UE in "FLEXABIS Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None the Read & Write idle mode) When value of "CARRYFL AG" in "ADD Read & Write Y BSC6900 The loopback keeps interrupting the Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved IP path Less than 5 minutes None None IP logical port None Not Read & Write involved Not involved Not involved None None IP logical port None None IP path None the When value of "CARRYFL AG" in "ADD Read & Write Y Not Read & Write involved Not involved Not involved IP path Less than 5 minutes None None ATM logical port None IR IR Cell DISABLE None DISABLE If "Power System Type" is "SC48200", the BTS BTS CSPH CSPH BSC None INCLUDE BSC6900 HORIZONTAL None None APPLICATION APPLICATI ON None OPTLOG None BSC6900 None OPTLOG BSC6900 Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None The value Read & Write idle mode) of this N (No parameter impact on must be the UE in smaller Read & Write idle mode) If this parameter N (No is not set to impact on CLOSE, it the UE in value must Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BTS The value of this parameter must be smaller Read & Write -1 -1 BTS 2 2 Cell 8 8 Cell 60 60 Cell None The setting of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write 2 2 Cell None Read & Write 20 20 BTS None Read & Write ENABLE 30 For 30 BTS EPS4815, the recommend ed value is BTS None Read & Write None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 2905 2905 SCTP link None None None None None None Ethernet 10 port None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved The services are interrupted SCTP link until the Not involved Not involved Not involved Not involved None Ethernet 5 port None CA_MA CA_MA Cell None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None Board YES YES Cell None This parameter is valid when " MAINBCC NO NO Cell None None Cell 0 0 Cell 0:00 None Cell None This parameter is valid when " MAINBCC This parameter is valid when " MAINBCC This parameter is valid when " MAINBCC None None BTS None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Not Read & Write involved Not involved Not involved 0 0 BTS None Read & Write Y BTS Less than 5 minutes None None BTS None None Cell None None Cell None None Cell None None Cell None None Cell None None Cell None None Cell None None Cell None None Cell None None Cell None None Cell None This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO This parameter is valid only when "IBCAALLO Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell This parameter is valid only when "IBCAALLO Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None PPP link None None None MP group None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None Ethernet port None None None BSC None 255.255.255. 255.255.255.255 255 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write Y PPP link Less than 5 minutes None None None None None Read & Write Y N (No impact on the UE in None BTS None Read & Write idle mode) N (No impact on the UE in None BTS None Read & Write idle mode) This parameter N (No is valid impact on when the UE in 8 4(application Cell 8 "PWRCTR Read & Write idle mode) type is N (No M3UA), impact on 10(applicatio the UE in n type is SCTP link None Read & Write idle mode) N (No impact on IP logical the UE in None port None Read & Write idle mode) N (No impact on the UE in 3 3 Cell None Read & Write idle mode) None BTS None PPP link Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 2 2 BSC None Read & Write 1 1 BSC 10 10 BTS None Read & Write This parameter is valid only when "BAKPWR Read & Write 1 1 Cell None Read & Write 1 1 Cell None Read & Write 1031 1031 None None Read & Write 100 100 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 256 256 PPP link None None None MP group None None None BSC6900 None None None BSC6900 None 125 125 BTS None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) PPP link Not involved Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None 2(application type is M3UA), 5(application type is SCTP link None Read & Write This parameter is valid only when 3 3 BSC "TYPE" in Read & Write 8 8 TRX None Read & Write 30 30 Cell None Read & Write 5 5 BSC None Read & Write 15C 15C BTS None Read & Write 15C 15C BTS None Read & Write 30 30 Cell None Read & Write 7_Times 7_Times Cell None Read & Write 7_Times 7_Times Cell None Read & Write 7_Times 7_Times Cell None Read & Write 7_Times 7_Times Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 64 64 PPP link None None None MP group 2 2 Cell 0 0 Cell 0 In Normal 0 Cell cell,the recommend ed value is 62 62;in Double Cell 20 20 Cell OFF OFF Cell 255 255 Cell 12 12 None 32 32 TRX Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid impact on when the UE in "PWRCTR Read & Write idle mode) This parameter N (No is valid impact on when the UE in "PWRCTR Read & Write idle mode) This parameter N (No is valid impact on when the UE in "PWRCTR Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) PPP link Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 16 16 None None Not Read & Write involved Not involved Not involved 8 8 Cell This parameter is valid when "PWRCTR Read & Write N (No impact on the UE in Not idle mode) involved Not involved None None None None Not Read & Write involved Not involved Not involved None None traffic None If the volume on each frequency 0 band is even Cell None 2 2 Cell 6 6 Cell None This parameter is valid only when "MEASURE This parameter is valid only when "MEASURE None None BSC6900 None None None BSC6900 None None None Cell None None None Cell None None None MP group 8 8 BTS None This parameter is required when "MLPPP Read & Write Y Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved PPP link Less than 5 minutes None None BSC6900 None Read & Write None None BSC6900 None None BTS None "BTSTYPE" Read & Write identifies the value range of this Read & Write OFF OFF Cell None Read & Write CLASS0 CLASS0 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Board None Not Read & Write involved Not involved Not involved 0 Ethernet 0 port None Not Read & Write involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None Ethernet port NO NO Cell 3 3 BSC ComMeasR ComMeasReport eport Cell Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) Set when Allow N (No Common impact on Measurem the UE in ent at Iur-g Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None Ethernet port None None None Ethernet port None LONG LONG MP group None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved LONG LONG BTS None 15 15 Cell None None IP logical port 10 10 Cell 0 0 Cell 170 170 BTS 170 170 BTS 170 170 BTS Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is based on impact on "HOCDCMI the UE in NDWPWR" Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) PPP link Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 170 170 BTS None Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write 170 170 BTS None Read & Write 140 140 BTS None Read & Write 140 140 BTS 16 16 Cell 60 60 Cell 10 10 Cell None This parameter is valid only when "HOCTRLS This parameter is valid only when "SDDYN" in A 3G cell can be added into the candidate Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 30 Ethernet 30 port Current BFD 100 session None 100 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved 30 Ethernet 30 port Current BFD 100 session None 100 None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None Ethernet port None None None Ethernet port None None None Cell None None None Cell None 80 80 BSC None AUTO AUTO BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCTP link None Read & Write Y Not involved The services are interrupted SCTP link until the None OFF BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None MSP protect group None Read & Write Y BSC6900 If the mode is not consistent, will interrupt None None None MODE1 MODE1 BTS MODE1 MODE1 BTS MODE1 MODE1 BTS MODE1 MODE1 BTS MODE1 MODE1 BTS MODE1 MODE1 BTS None None None None None None None None BTS 35 35 Cell Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "QUICKHO Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 10 Ethernet 10 port None Read & Write 5 Ethernet 5 port None Read & Write None None MP group None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS MODE4_1 MODE4_1 BTS None None BTS ENABLE ENABLE BTS MCPPP MCPPP MP group None None None None None None YES YES Cell None Read & Write Y This parameter can be set to MODE5_1 Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid impact on when the UE in "PWRCTR Read & Write idle mode) PPP link Less than 5 minutes BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 4 4 Cell 5 5 Cell Once_ps Once_ps Cell None Read & Write This parameter is valid only when "PWRCTR Read & Write This parameter must be set when "BTSMESR Read & Write 4 4 BTS None Read & Write 4 4 BTS None Read & Write OFF OFF None None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1500 1500 BTS None 3 3 BSC6900 None OFF OFF Cell None 1800 1800 MSC None 1 1 BSC None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) PPP link Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BSC None Read & Write NO NO BSC None Read & Write NORMAL NORMAL MSC None Read & Write R98_or_below R98_or_belo w Cell None Read & Write 15000 15000 Cell None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write None None BSC None Read & Write None None BSC NO NO Cell None Read & Write This parameter is valid only when "QUICKHO Read & Write 4_Times 4_Times Cell MSP protect group None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None MCS5 MCS5 Cell 40 40 Cell None The value of this parameter must be smaller None None BTS None 10 10 Cell None 200 200 Cell None 1000 1000 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 45 45 BSC None Read & Write 2 2 Cell None Read & Write None ON BSC6900 None Read & Write 85 85 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None E1/T1 port None Not Read & Write involved Not involved Not involved None None MTP3 link None MET MET None None 800 800 SCTP link None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved None Ethernet If "MTU"1500 port is set to a value smaller than 1500 576, the BTS None None 225 225 BTS None REPORT6 REPORT6 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved If the mode is not consistent, will interrupt Not involved Not involved Not involved Not involved Not involved Not involved None 5 Cell None DISABLE Cell This parameter is valid when "TCMUTED Read & Write This parameter is valid when "TCMUTED Read & Write None 4 Cell None. N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Cell None Not Read & Write involved Not involved Not involved NO NO Cell None 1000 1000 MP group None None None MP group None None None None None 6 6 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None the None When transmission quality is good, the 3 recommend BTS 5 5 Cell Not Read & Write involved N (No impact on the UE in None N200ESTA Read & Write idle mode) B must be N (No set when impact on "N200PAR the UE in ASWITCH" Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved 34 34 Cell None Read & Write 29 29 Cell None Read & Write OFF OFF Cell None Read & Write 5 5 Cell None Read & Write 5 5 Cell None Read & Write 23 23 Cell None Read & Write 20 20 Cell None Read & Write 3 3 Cell None Read & Write 10 10 Cell None Read & Write 6 6 BC None Read & Write 3 3 BC None Read & Write 4 4 BC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO None Cell This parameter is valid only when "GPRS" is Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write NO NO Cell None Read & Write 2 2 Cell None Read & Write DISABLE DISABLE Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell NO None Cell None Read & Write This parameter is valid only when "GPRS" is Read & Write NOTSUPPORT NOTSUPPO RT BSC NO None Cell None Read & Write This parameter is valid only when "GPRS" is Read & Write Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Cell Less than 5 minutes None None Cell None None SELECTION0_P ERM1&SELECTION1 _PERM1&SELECTION2 None SELECTION Cell 0_PERM1&SELECTI ON1_PERM1&SELECTI Cell None None 1 1 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved 4 4 Cell This parameter is valid only when "QUICKHO Read & Write 4 4 Cell 0 0 BSC 49 49 BSC 55 55 BSC 61 61 BSC 64 64 BSC 67 67 BSC 73 73 BSC 79 79 BSC 0 0 Cell 0 0 Cell None The following condition must be met: The following condition must be met: The following condition must be met: The following condition must be met: The following condition must be met: The following condition must be met: The following condition must be met: The following condition must be met: setting The of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NC0 NC0 Cell None N (No impact on the UE in Not Read & Write idle mode) involved Not involved YES YES SCCP None None None None None 4 4 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Less than 10 minutes Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None IP route None Not Read & Write involved Not involved Not involved None None None None None None BTS None None SCCP None None None NMOII NMOII Cell None None BTS None This parameter depends on network Not planning. Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None The value Read & Write idle mode) range of N (No this impact on parameter the UE in varies with Read & Write idle mode) Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS The value range of this parameter varies with Read & Write None None BTS None Read & Write None None BTS None Read & Write 43 None None None Read & Write 57 None None None Read & Write 43 None None None Read & Write 57 None None None Read & Write 43 None None None Read & Write 57 None None None Read & Write 43 None None None Read & Write 57 None None None Read & Write 43 None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 57 None None None Read & Write 43 None None None Read & Write 57 None None NO NO Cell 2 2 Cell 30 30 Cell 1 1 Cell 95 95 Cell 0 0 Cell 85 85 Cell 14 14 Cell 103 103 Cell None This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Cell 2 2 Cell 25 25 Cell This parameter is valid only when "HOCTRLS Read & Write This parameter is valid only when "HOCTRLS Read & Write This parameter is valid only when "HOCTRLS Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None Adjacent node 8 8 Cell None Read & Write This parameter is valid only when "NODLMR Read & Write NO NO Cell 50 50 Cell None Read & Write This parameter is valid only when "NODLMR Read & Write 100 100 BTS ON ON Cell None Read & Write This parameter is valid only when "PWRCTR Read & Write 0.24sec 0.24sec Cell None Read & Write 2500 2500 BTS None Read & Write 2500 2500 BTS None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved PERMIT PERMIT Cell 500 500 BTS None The value Read & Write of this parameter must be 8C smaller Read & Write CLOSE CLOSE BSC 48 48 TRX 30 30 BTS None Read & Write This parameter is valid only when "WLNKAL Read & Write This parameter is valid only when "ENABLE" Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 3 3 None 2 2 Cell 6 6 Cell None Read & Write This parameter is valid only when "MEASURE Read & Write This parameter is valid only when "MEASURE Read & Write None None BSC None None None BSC None YES YES BSC None Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None NSE None Not Read & Write involved Not involved Not involved None None Cell 2 2 Cell None None Cell N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "HOCTRLS Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None NSVC None Not Read & Write involved Not involved Not involved None None NSVC None 9 9 BTS None 16 16 BTS None 10 10 Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Ethernet port None Read & Write Y Ethernet port 0 0 PPP link None 0 0 MP group None 0 IP logical 0 port None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved If the value is too big, will interrupt service Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved 0 Ethernet 0 port None Read & Write None None Port queue None Read & Write None None Port queue None Read & Write None None None None Read & Write None None None None Read & Write None None BSC6900 None Read & Write None None BTS None Read & Write None None None None Read & Write OFF OFF Cell YES YES Cell None Read & Write This parameter is valid only when "IUOTP" in Read & Write NO NO BTS None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None OFF BSC6900 None Not Read & Write involved Not involved Not involved 10 10 BSC None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BSC6900 None 64 Transport 64 channel None 64 Transport 64 channel None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None 1 1 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None 1 1 BTS None None None BSC6900 None None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write Y Cell Less than 5 minutes None None Cell None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None E1/T1 link None None None BSC None None None BSC None None None BSC None None None E1/T1 link None None None E1/T1 link None None None E1/T1 link None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None PBCIC None None None BSC SysOpt SysOpt Cell 35 35 Cell None This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 63 63 Cell L0 L0 TRX This parameter is valid only when "IUOTP" in Read & Write This parameter is valid only when "TRXPRIAL Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved None None Board None None None None None Read & Write Y BSC6900 N (No impact on the UE in Not Read & Write idle mode) involved Not involved Interrupt the service until negotiate successfull Not involved None None BTS None None None BSC None None None BTS None Step_by_Step Step_by_Ste p None None None None Cell 20 20 Cell YES YES Cell None This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in 10000 10000 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 10000 10000 Cell NO NO Cell 80 80 Cell None Read & Write This parameter is valid only when "LOADHOE Read & Write This parameter is valid only when "IUOTP" in Read & Write 15 15 TRX 25 25 Cell YES YES Cell 1 1 Cell 5 5 Cell 5 5 Cell 50 50 Cell None This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in This parameter is valid only when "OUTLOAD This parameter is valid only when "OUTLOAD This parameter is valid only when "OUTLOAD This parameter is valid only when "IUOTP" in Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None HIGH HIGH BTS HIGH HIGH BTS HIGH HIGH BTS HIGH HIGH BTS None None BTS None None BTS None None BTS 90 90 Cell YES YES Cell Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "IUOTP" in Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BSC NO NO Cell NO NO BSC CLOSE CLOSE BSC 15 15 BSC Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "OUTSYSS Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None 320 320 BTS None 320 320 BTS None 185 185 BTS None 280 280 BTS None 280 280 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 155 155 BTS None Read & Write 1500 1500 BTS None Read & Write 1500 1500 BTS None Read & Write 15 15 Cell 580 580 BTS None The value Read & Write of this parameter must be 8C greater Read & Write 90 90 BSC None Read & Write 85 85 BSC None Read & Write 80 80 BSC None Read & Write 75 75 BSC None Read & Write NO NO BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO Cell 180 180 Cell None Read & Write This parameter is valid when "ALLOWG2 Read & Write Not Y involved N (No impact on the UE in Not idle mode) involved Less than 5 minutes Not involved 255 255 Cell 220 220 Cell None Read & Write This parameter is valid when "ALLOWG2 Read & Write 4 4 Cell None Read & Write Pan_1 Pan_1 Cell None Read & Write Pan_2 Pan_2 Cell None Read & Write Pan_20 Pan_20 Cell L0 L0 TRX None Read & Write This parameter is valid only when "BSCDynS Read & Write None None BTS None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved DISABLED DISABLED IP path None Not Read & Write involved Not involved Not involved None None IP path None Not Read & Write involved Not involved Not involved None None IP path None Not Read & Write involved Not involved Not involved 79 79 Cell NO NO Cell This parameter is valid only when "PWRBCD Read & Write This parameter is valid only when "HOCTRLS Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved None QoS IP path None None None None None DB2 DB2 Cell YES YES Cell 4 In densely 4 Cell populated urban areas, the 68 recommend Cell None This parameter is valid only when "HOCTRLS This parameter is valid only when "HOCTRLS 6 6 Cell 2 2 BSC 3 3 Cell None This parameter is valid only when "HOCTRLS This parameter is valid only when "TYPE" in This parameter is valid when "PWRCTR PDCH PDCH Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None PBCIC None Not Read & Write involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None PBE1T1 None None Cell None Read & Write This parameter is valid only when "GPRS" is Read & Write NO NO BTS None Read & Write 80 80 Cell None Read & Write NO NO Cell None Read & Write NO NO Cell None Read & Write 70 70 Cell None Read & Write 5 5 SCCP None Read & Write None None BSC None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 15 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BSC6900 None None None MP group None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None None None None BTS None None BTS Not None The peer IP Read & Write involved address and the local IP address IP Read & Write Y The peer address and the local IP address Read & Write Y Not involved Not involved PPP link Less than 5 minutes None None SCTP link None Read & Write Y None SCTP link None "IPADDR" Read & Write and "PEERIPA DDR" in None None IP path "ADD ("IPADDR", Read & Write "PEERIPA DDR","PEE 255.255.255. RMASK" in 255.255.255.255 255 IP path "ADD Read & Write None Y Less than 5 minutes The services are interrupted SCTP link until the The services are interrupted SCTP link until the PPP link Not involved Not involved Not involved Not involved Not involved Not involved None None SCTP link None None None None YES YES Cell 10 10 Cell 30 30 Cell 255 255 Cell 5 5 IP path None 5 BSC Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None the Read & Write idle mode) When value of N (No "PATHCHK impact on " in "ADD the UE in IPPATH" is Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) The services are interrupted SCTP link until the Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Enable Enable PPP link None Read & Write Y PPP link Enable Enable MP link None Read & Write Y BSC6900 Not involved Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull YES YES BTS None Read & Write Y PPP link Less than 5 minutes NO NO NSE None Read & Write Y NSE Less than 5 minutes 2 2 BSC 660 660 BSC 1000 1000 BSC None None Board None None IP Path YES YES Cell None None BSC6900 N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) The phb of the traffic's transmissio n path is Not determined Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (Impact on the UE in idle None Read & Write mode) N (No impact on the UE in None Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 10 10 BSC6900 None Read & Write Y Ethernet port 128 128 BSC6900 None None None BC 1031 1031 BTS NO None Cell Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No must meet impact on the the UE in following Read & Write idle mode) This parameter is valid only when "GPRS" is Read & Write Y Ethernet port Not involved The loopback keeps interrupting the The loopback keeps interrupting the Not involved Not involved Not involved Not involved Cell Less than 5 minutes 56 Ethernet 56 port None Read & Write 128 Ethernet 128 port None Read & Write 12_level 12_level Cell None Read & Write 0 0 TRX None Read & Write 13_level 13_level Cell None Read & Write 14_level 14_level Cell None Read & Write 0 0 TRX None Read & Write 16_level 16_level Cell None Read & Write 0 0 TRX None Read & Write 10 IP logical 10 port None Read & Write 30 IP logical 30 port None Read & Write None None Board None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Board None Read & Write None None Board None Read & Write 60 60 Board None Read & Write 60 67 Board None Read & Write 2 2 Cell None Read & Write 5 5 Cell None Read & Write OPEN OPEN Cell None Read & Write 50 50 Board None Read & Write 50 62 Board None Read & Write ON ON Board None Read & Write None None None None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None E1/T1 link None Not Read & Write involved Not involved Not involved None None E1/T1 link None None None E1/T1 link None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None PBE1T1 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None Board None None None E1/T1 port None None None None None None None None None None None Loopback optical port None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write Y BSC6900 Less than 5 minutes None None Board None None None None None Channelize d optical port None 0 or If port port 4 of the FG2a Ethernet board is set Not port to the GE Read & Write involved Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None IP logical port None Not Read & Write involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None E1/T1 port None Not Read & Write involved Not involved Not involved None None E1/T1 port None Not Read & Write involved Not involved Not involved None None E1/T1 port None None None PBSL None None None BTS None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None PPP link None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None 650 650 Cell None 16 16 Cell None 6 6 Cell None Support Support Cell None 2 2 Cell None 2 2 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BTS None Not Read & Write involved Not involved Not involved None None BTS None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes 16 16 BTS None None None BSC6900 None None None None None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved None None Ethernet port None None BTS BCCHNorm BCCHNorm Cell None None None 125 125 BTS Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) If this parameter N (No is impact on BCCHExt," the UE in CCCH Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved CLOSE None None None Read & Write CLOSE None None None Read & Write CLOSE None None None Read & Write CLOSE None None None Read & Write CLOSE None None None Read & Write CLOSE None None None Read & Write 100 100 BTS None Read & Write 0 0 Cell None Read & Write 0 0 Cell None Read & Write POWER_48 POWER_48_24 _24 BTS None Read & Write 220VAC 220VAC BTS None Read & Write 0 0 TRX None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved DEFAULT None TRX None 10 Ethernet 10 port None 5 Ethernet 5 port None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None PPP link None None None MP link None None None IP logical port None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None PPP link Disable Disable MP group 2 2 BSC6900 NO NO BSC NOT_ALLO NOT_ALLOWED WED BSC OFF OFF Cell Not Read & Write involved N (No impact on the UE in None the Read & Write idle mode) When value of N (No "PORTPR impact on OTYPE" in the UE in "ADD Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 BSC None Read & Write 60 60 BTS None Read & Write 6 6 Cell None Read & Write NO NO BSC NO NO Cell None Read & Write This parameter must be set when "BTSMESR Read & Write 60 60 Board None Read & Write 60 72 Board None Read & Write 50 50 Board None Read & Write 50 65 Board None Read & Write ON ON Board None Read & Write None None Cell Prior-1 Prior-1 Cell None Read & Write This parameter, together with "LAYER", Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 80 80 BTS None Read & Write 2 2 Cell None Read & Write 0 0 SCCP None Read & Write 0 0 None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None IP route None None None BTS None None None BTS None None None BTS None None None BSC6900 None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved ITUT ITUT SCCP None Not Read & Write involved Not involved Q933 Q933 BC None Read & Write Y BC Not involved Services are interrupted until the parameter 15 15 BTS 5 5 Cell 300 300 BSC Not None Read & Write involved This parameter N (No is valid only impact on when the UE in "TURNOFF Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None ALL E1/T1 port None Not Read & Write involved Not involved Not involved None None Board None None ALL Channelize d optical port None 100 100 BSC6900 None 100 100 BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO None None NO the NSE When interface type is Abis, the parameter is BSC6900 When the interface type is Abis and transmission BSC6900 None the Read & Write When value of "ITFT" in "ADD TRMMAP" Read & Write When the value of "ITFT" in "ADD TRMMAP" Read & Write 4 4 Cell None Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) NSE Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved 6 6 Cell None Read & Write NO None None NO the Cell When interface type is Abis, transmission type is the BSC6900 When IP, interface type is Abis and transmission BSC6900 None the Read & Write When value of "ITFT" in "ADD TRMMAP" Read & Write When the value of "ITFT" in "ADD TRMMAP" Read & Write 6 6 Cell None Read & Write 25 25 Cell -109 -109 Cell None The value of this parameter must be smaller Read & Write Read & Write -109 -109 BTS None Read & Write 500 500 BSC None Read & Write 1000 1000 BSC None Read & Write YES YES BTS None Read & Write YES YES BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES For "APMU Board Type" is "APM30" or "EPS4815", BTS None Read & Write YES YES BTS None Read & Write YES YES BTS None Read & Write YES YES BTS None Read & Write YES YES BTS None Read & Write YES YES BTS None Read & Write YES YES BTS None Read & Write 35 35 Cell None Read & Write None None BTS None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Cell None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None NSE None BOOL BOOL BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved None None E1/T1 port None Read & Write Y BSC6900 None None E1/T1 port None Read & Write Y BSC6900 None None E1/T1 port None Read & Write Y BSC6900 None E1_CRC4_ MULTI_FRA ME E1/T1 port None None None BTS None None None Ethernet port None None None BTS None None None BSC6900 None None None BTS None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None Read & Write 500 500 BSC None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None None None Read & Write None None None None Read & Write NO NO Cell NO NO Cell None Read & Write This parameter is valid only when "PWRCTR Read & Write PWR3 PWR3 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 Cell None Read & Write YES YES Cell None Read & Write ALLPwrLoc ALLPwrLoc Cell None Read & Write None None BTS 5 5 BTS None Read & Write This parameter is valid only when "BAKPWR Read & Write YES YES Cell None Read & Write Default Default TRX None Read & Write OFF OFF BTS None Read & Write OFF OFF BTS None Read & Write OFF OFF BTS None Read & Write None None Port queue None Read & Write None None Port queue None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Port queue None Read & Write None None Port queue None Read & Write None None Port queue None Read & Write Use_Qsearch_I NO Use_Qsearc h_I this Cell Set parameter to YES only in special scenarios Cell None Read & Write 3 3 Cell 15 15 Cell 2 2 Cell None This parameter is valid only when "QCKMVH This parameter is valid only when "QCKMVH This parameter is valid only when "QCKMVH Read & Write Read & Write Read & Write Read & Write 15 15 Cell None Read & Write 6 6 Cell None Read & Write 2 2 Cell None Read & Write NO NO Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 15 15 Cell None Read & Write 15 15 Cell None Read & Write NO NO Cell 3 3 Cell 5 5 Cell None Read & Write This parameter is valid only when "QTRUPW Read & Write This parameter is valid only when "QTRUPW Read & Write NONE NONE Cell 6 6 BTS 6 6 BTS 2 2 Cell None This parameter must be equal to or greater This parameter must be equal to or greater This parameter is valid when "PWRCTR Read & Write Read & Write Read & Write Read & Write NO NO Cell None Read & Write NO AU0-0&AU10&AU2-0&AU30&AU4-0&AU50&AU6-0&AU7-0 NO AU0-0&AU1- Cell 0&AU20&AU30&AU40&AU5BTS None Read & Write None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO BTS INSIDE_50AH INSIDE_50A H BTS 015C 015C BTS INSIDE_BATTE RY AU0-0&AU10&AU2-0&AU30&AU4-0&AU50&AU6-0&AU7-0 INSIDE_BA TTERY AU0-0&AU1- BTS 0&AU20&AU30&AU40&AU5BTS None This parameter is valid only when "R0BatAllo This parameter is valid only when "R0BatAllo This parameter is valid only when "R0BatAllo Read & Write Read & Write Read & Write Read & Write None Read & Write NO NO BTS INSIDE_50AH INSIDE_50A H BTS 015C 015C BTS INSIDE_BATTE RY AU0-0&AU10&AU2-0&AU30&AU4-0&AU50&AU6-0&AU7-0 INSIDE_BA TTERY AU0-0&AU1- BTS 0&AU20&AU30&AU40&AU5BTS None This parameter is valid only when "R1BatAllo This parameter is valid only when "R1BatAllo This parameter is valid only when "R1BatAllo Read & Write Read & Write Read & Write Read & Write None Read & Write NO NO BTS INSIDE_50AH INSIDE_50A H BTS None Read & Write This parameter is valid only when "R2BatAllo Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 015C 015C BTS INSIDE_BATTE RY INSIDE_BA TTERY BTS This parameter is valid only when "R2BatAllo Read & Write This parameter is valid only when "R2BatAllo Read & Write 0 0 Cell None 0 0 Cell 0 None Cell None None Cell None None Cell None None Cell -109 -109 Cell 16 16 Cell 5000 5000 Cell -109 -109 BTS None This parameter is valid only when "GPRS" is Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) The value of this N (No parameter impact on must be the UE in smaller Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1 1 Cell None Read & Write YES YES Cell None Read & Write 225 225 Cell None Read & Write 2dB 2dB Cell None Read & Write 100M 100M BTS None Read & Write ALG1 ALG1 Cell None Read & Write DISABLE DISABLE Cell None Read & Write 4 4 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None REC_ALL BSC6900 None None None BTS None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write NONE NONE TRX None Read & Write 96 IP logical 96 port None Read & Write YES YES Cell Diff_Band Diff_Band Cell 50 50 Cell 40 40 Cell 5 5 Cell 30 30 Cell YES YES Cell None This parameter is valid when "REASSEN This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write NO NO BSC None Read & Write 30 IP logical 30 port None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 60 60 Cell NO NO Cell This parameter is valid only when "IUOTP" in Read & Write This parameter is valid only when "IUOTP" in Read & Write None None Board None Read & Write 10 10 BSC None Read & Write 3 3 BSC None Read & Write 0 None Board None Read & Write None None Board None Read & Write 0 None Board None Read & Write 0 None Board None Read & Write OFF None Board None Read & Write OFF None Board None Read & Write NO NO Board None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write None None Cell None Read & Write 600 None Cell None Read & Write REHOSTDE REHOSTDELAY LAY Cell None Read & Write None NO BSC6900 None Read & Write None None BTS None Read & Write NO NO BTS None Read & Write OFF OFF BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write NONE NONE BTS None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None IP route None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None NSE None None Cell NO NO Cell 5 5 Cell NO NO Cell NO NO BTS YES YES BSC 6 6 Cell 2 2 Cell 10 10 Cell 1 1 Cell Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid impact on when the UE in "REPEATD Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Cell 2 2 Cell None Read & Write This parameter is valid when "DYNOpen Read & Write NO NO BSC 5 5 BSC None Read & Write This parameter is valid only when "ResetAlm Read & Write None None BSC6900 None Read & Write 3 3 BSC None Read & Write None None BTS None Read & Write 10 10 BSC None Read & Write Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None YES YES BSC None NO None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved 3 3 PPP link None Read & Write Y BSC6900 Not involved Interrupt the service until negotiate successfull 3 3 MP link None Read & Write None None BSC6900 30 30 BSC None Read & Write Set when Allow Common Measurem ent at Iur-g Read & Write 0 0 Cell None Read & Write 5 5 Cell None Read & Write 10 10 Cell None Read & Write 1 None BSC6900 None Read & Write NO NO BTS None Read & Write GPS GPS BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO NSE None None None None None 52_Times 52_Times Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) NSE Less than 5 minutes Not involved Not involved Not involved Not involved STANDALONET STANDALO C NETC BSC None None Cell 255 255 BSC None None BSC None None None None None BSC6900 RMTTCAT ERTRANS MODE must be set when Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) BSC6900 Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None None None BSC None DISABLE DISABLE Cell None 15.36sec 15.36sec Cell None 0.96sec 0.96sec Cell None 20 IP logical 20 port None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO 2 6 None None None None None This parameter is valid only when 2 Cell "MEASURE This parameter is valid only when 6 Cell "MEASURE When the value of "ADDTORS CGRP" in AAL2 path "ADD Transmissi on resource group None Cell Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not Read & Write involved Not involved Not involved None None IP logical port 5 5 Cell 3 3 Cell 30 30 Cell None None Board None None Board MINUS_2db MINUS_2db Cell Not Read & Write involved N (No impact on the UE in None cell Read & Write idle mode) A 3G can be N (No added into impact on the the UE in candidate Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Transport channel None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None None None Transport channel None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None 4 4 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 Set this parameter to about 68 in densely 68 populated BSC None None None None BSC6900 OFF OFF SCCP None the When value of "SPCBITS" is set to BIT14 or Read & Write Y Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved BSC6900 Not involved The services are interrupted until the 3000 3000 PPP link 0 0 Cell None Read & Write This parameter is valid only when "EMCPRIL Read & Write Y BTS N (No impact on the UE in Not idle mode) involved Less than 5 minutes Not involved None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write 2 2 BSC MSP protect group None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None Read & Write Y BSC6900 Not involved If the mode is not consistent, will interrupt 4294967295 4294967295 SCCP None 1 1 BSC6900 None ON ON BSC6900 None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 The services are interrupted until the Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None None None BTS None 12 12 SCTP link None 25 1000 3000 1000 25 SCTP link None The value to be set should be larger than 1000 SCTP link the value of The value to be set should be larger than 3000 SCTP link the value of The value to be set should be smaller 1000 SCTP link than the DISABLE DISABLE Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 30 30 Cell None Read & Write None None BTS None Read & Write 5 IP logical 5 port None Read & Write 5 IP logical 5 port None Read & Write None None BTS None Read & Write None None None None IP path Transmissi on resource group None When "GRPT" in "ADD RSCGRP" is set to Read & Write Read & Write 2 2 Cell None Read & Write 5 5 Cell None Read & Write NO 8 In dual-band Cell 8 networking mode for densely populated Cell None Read & Write This parameter is valid only when "HOCTRLS Read & Write 60 60 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 42 42 Cell None Read & Write 41 41 Cell None Read & Write 40 40 Cell None Read & Write 50 50 Cell None Read & Write 49 49 Cell None Read & Write 48 48 Cell None Read & Write 47 47 Cell None Read & Write 46 46 Cell None Read & Write 45 45 Cell None Read & Write 44 44 Cell None Read & Write 43 43 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None TRX None Not Read & Write involved Not involved Not involved None None BTS None None None BTS None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None TRX None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None TRX None None None BTS None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None TRX None None None BTS None None None BTS None None None BTS None OFF OFF Board None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Board None Read & Write None None BTS None Read & Write None None BTS NO NO BSC6900 NO NO Cell 1 1 Cell 3 3 Cell None This parameter is required when "Default This parameter is valid only when "PWRBCD This parameter is valid only when "SAICALLO This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write None None BTS None None Cell BYNAME BYNAME Cell 5 5 Cell 50 50 Cell None This parameter is valid only when "TURNOFF This parameter is valid only when "TURNOFF 1. This parameter is valid only when "TURNOFF This parameter is valid only when "TURNOFF Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell This parameter is valid only when "TURNOFF Read & Write 32 32 Cell None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write ADD0dB ADD0dB Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 38 38 BSC 4 4 Cell None Read & Write This parameter is valid only when "QUICKHO Read & Write Not involved N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write None None BSC6900 None Read & Write None ENGLISH Cell None Read & Write None None None None Read & Write None None BSC6900 None Read & Write BYCELLID BYCELLID None None Read & Write None None None None Read & Write None 0 Cell None Read & Write 1 1 BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCTP link None None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None BSC6900 None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved 1.00E-06 MSP protect 1.00E-06 group None None None None None None None BSC6900 None 1 1 BTS None OFF OFF Cell None 10 10 Cell None 6 6 Cell None 55 55 Cell None 6 6 Cell None 55 55 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES Cell MSP protect group None N (No impact on the UE in Not Read & Write idle mode) involved None DISABLE None OFF OFF Cell ENABLE ENABLE TRX 2 2 Cell 1 1 Cell 40 40 Cell 30 30 Cell Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "PWRCTR Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 48 48 BSC MSP protect group None Not Read & Write involved Not involved Not involved None None None 53 53 BTS None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None None BTS If "Power System Type" is "APM30" and the BTS BTS None The value of this parameter must be smaller Read & Write Read & Write YES YES Cell None Read & Write None None None None Read & Write YES YES BSC None Read & Write NO NO BSC None Read & Write NO NO Cell None Read & Write NO NO MSC None Read & Write YES YES BSC None Read & Write NoPriority NoPriority Cell None Read & Write NoPriority NoPriority Cell None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO BSC None Read & Write YES YES BSC None Read & Write YES YES BSC None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved UNSUPPORT None BTS None None None BSC6900 None None None BSC6900 None None None BTS None None None BSC6900 None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved SEPARATE SEPARATE BSC None Read & Write Y BSC6900 Less than 10 minutes TDM TDM BTS None None BTS None The value Read & Write Y range of this parameter varies with Read & Write Y BTS Less than 5 minutes BTS Less than 5 minutes None None BSC6900 None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BTS None NO NO BTS None NO NO BTS None NO NO BTS None NO NO BTS None None None BTS None 1800 1800 BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC 1 1 BSC 0 0 BSC None This parameter is valid when "SGSNPO This parameter is valid when "SGSNPO NO NO BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Release 99 onwards Release 99 onwards Cell None N (No impact on the UE in Not Read & Write idle mode) involved ALLOW ALLOW BSC None 75 75 BSC None Read & Write Y BSC N (No impact on the UE in Not Read & Write idle mode) involved Not involved Services are interrupted until the parameter Not involved None None BSC None Not Read & Write involved Not involved Not involved NO NO BTS None None None BSC6900 3 3 BTS YES YES BSC NO NO Cell 4 4 BSC6900 Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the the UE in cell Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) Cell Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None SCCP None Not Read & Write involved Not involved Not involved None None SCCP None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved 100 100 NSE None 100 100 NSE None 2 2 BSC None 5 5 BSC6900 None 2 2 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) NSE Not involved Services are interrupted until "SIGLW" is Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None 2 2 Cell None 3000 3000 BSC None None None BSC None None None BSC None None None BSC None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None BSC None Read & Write None None Ethernet port None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None None None BSC6900 None 255 None BSC6900 None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None None None None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved B0000 B0000 SCCP None Read & Write 300 300 BSC None Read & Write None None BSC6900 None Read & Write None None BSC None Read & Write None NOTSUPPO RT BSC None Read & Write OPEN None None None Read & Write None None BSC6900 10 10 None None Read & Write The number of CPU usage sampling times is at Read & Write None None None None Read & Write None None None None None None Transmissi on resource group None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None E1/T1 link None None None None None E1/T1 link None Transmissi on resource group None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None None None None None Cell None None None BSC None None None BTS None 6 6 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Board None Not Read & Write involved Not involved Not involved None None Transmissi on resource group None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None NONE NONE TRX None DOUBLE_ANTE DOUBLE_A NNA NTENNA BTS None DOUBLE_ANTE DOUBLE_A NNA NTENNA BTS None DOUBLE_ANTE DOUBLE_A NNA NTENNA BTS None DOUBLE_ANTE DOUBLE_A NNA NTENNA BTS None SGL_ANTE SGL_ANTENNA NNA BTS None None None BSC6900 None None SCCP None None SCCP None the When value of "SPDF" is set to WNF, this Read & Write Y This parameter depends on network planning. Read & Write Y Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved BSC6900 BSC6900 Not involved The services are interrupted until the The services are interrupted until the None None SCCP None None PBE1T1 WNF L11_FORBID0&L12_FORBID0&L13_FORBID0&L14_FORBID0&L15_FORBID- WNF L11_FORBI SCCP D0&L12_FOR BID0&L13_FOR Cell None None BTS None None BTS YES YES MSC YES YES MSC YES YES MSC NO NO MSC PSMODE PSMODE BTS PSMODE PSMODE BTS When the value of "SPDF" is set to DNF, Not this Read & Write involved N (No impact on the UE in None the Read & Write idle mode) When value of N (No "SPDF" in impact on "ADD the UE in N7DPC" is Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved FR FR BTS None N (No impact on the UE in Not Read & Write idle mode) involved None AUTO Ethernet port None 30 30 Cell 40 40 Cell NO NO Cell NOTSPPRTBC NOTSPPRT BC BSC NO NO BSC NO NO BSC UNSUPPORT None Cell UNSUPPORT None Cell NO NO BSC NO NO BSC6900 Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "GPRS" is Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "GPRS" is Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is required impact on when the UE in "Trunking Read & Write idle mode) BSC6900 Not involved Interrupt the service until negotiate successfull Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO BSC NO NO BSC NO NO BSC NO NO BSC This parameter is valid only when "TYPE" in This parameter is valid only when "TYPE" in This parameter is valid only when "TYPE" in This parameter is valid only when "TYPE" in Read & Write Read & Write Read & Write Read & Write NO NO BSC UNSUPPORT None Cell NO NO BTS None None BSC6900 None Read & Write This parameter is valid only when "GPRS" is Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Cell Less than 5 minutes Not involved Not involved Not involved Not involved None None version SCCP If the of a GSM base station is NOT_SUPPORT BTS3000V1 BTS If the software version of the None SingleRAN BTS None Not Read & Write involved Not involved Not involved None Read & Write Y BTS Less than 5 minutes None Read & Write Y BTS Less than 5 minutes NOT_SUPP NOT_SUPPORT ORT BTS None Read & Write Y BTS Less than 5 minutes None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None None HOALGORITHM HOALGORI 1 THM1 Cell Current BFD session None The value Read & Write of this parameter must be the same as Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None None Cell None None None Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None Ethernet port None None None Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None None LINE1_8K and LINE2_8K are most commonly E1/T1 port None None None None None E1/T1 port None None None None None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None BSC6900 None None None E1/T1 link None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BSC6900 None Not Read & Write Invovled Not Invovled Not involved None None BSC6900 None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BSC6900 None None None BSC None None None BSC None None None BTS None 0 0 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BSC None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write Y BTS Less than 5 minutes None None Control plane link None Read & Write Y Subrack connection Less than path 5 minutes Subrack connection Less than path 5 minutes None None BSC6900 None Read & Write Y None None None None Read & Write None None None None Read & Write None None None None Read & Write DES None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved 100 100 NSE None 100 100 NSE None GSM_PRIOR GSM_PRIO R BTS None None None BTS None 63 63 Cell None 75 75 Board None 85 85 Board None 80 80 Board None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) NSE Not involved Services are interrupted until "SRVLW" Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 85 80 Board None Read & Write 6 6 Cell None Read & Write 2 2 Cell None Read & Write None None None None Read & Write None None BSC None Read & Write None None BSC6900 None Read & Write 63 63 Cell None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write None None Cell None Read & Write None None BSC6900 None Read & Write YES YES BSC None Read & Write YES YES BSC None None None the Read & Write When value of "OPMODE" of "BLK E1/T1 link ACIC" is Read & Write None None PBCIC None None BSC -100 -100 BTS None None BSC None The setting of this parameter must meet the value The of this parameter must be smaller The setting of this parameter must meet the Read & Write Read & Write Read & Write Read & Write YES YES BSC None Read & Write YES YES BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None 240 None None None None None None None This parameter is valid only when 240 BTS "ENABLE" This parameter is set only when BSC "BSCDynS When the value of "OPMODE" of "BLK E1/T1 link ATERE1T1 When the value of "OPMODE" of "BLK E1/T1 link AE1T1" is BTS Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS ENABLED ENABLED DISABLED DISABLED None None None None None None None None Read & Write Y N (No impact on the UE in BTS None Read & Write idle mode) N (No impact on the UE in BTS None Read & Write idle mode) N (No impact on the UE in E1/T1 link None Read & Write idle mode) N (No impact on the UE in BTS None Read & Write idle mode) N (No impact on the UE in BSC6900 None To ensure Read & Write idle mode) that all the N (No frequencies impact on can be the UE in BSC measured Read & Write idle mode) None BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO MTP3 link None Read & Write None None None None Read & Write NO NO Cell None Read & Write OFF OFF Cell 120 120 BTS None Read & Write This parameter is valid only when "ENABLE" Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved OFF OFF SCCP None None BTS None None Cell None None BTS None None BTS None None BTS None None BSC6900 Not Read & Write involved N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None added Read & Write idle mode) If the monitoring N (No timeslot impact on works at 64 the UE in kbit/s, the Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None None None None None None None If "Work Mode for Auto Download BTS Activation" When SUBBSC is selected for "BSC flag", E1/T1 link this When SUBBSC is selected for "BSC flag", E1/T1 link this Read & Write Read & Write Read & Write Read & Write None None None None Read & Write 352 352 None 352 352 BTS None Read & Write This parameter must meet the following Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 NO NO Cell None Read & Write This parameter is valid when "FLEXABIS Read & Write NO NO BTS None Not involved N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None Read & Write YES YES BSC None Read & Write NO None None None Read & Write NO None None None Read & Write NO NO Cell None Read & Write NOTSUPPORT NOTSUPPO RT BSC UNSUPPORT None Cell NOTSUPPORT NOTSUPPO RT BSC UNSUPPORT None Cell NO NO BSC NO NO BSC None Read & Write This parameter is valid only when "GPRS" is Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter is valid only when "GPRS" is Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Cell Less than 5 minutes Not involved Not involved Cell Less than 5 minutes Not involved Not involved Not involved Not involved NO NO BSC None Not Read & Write involved Not involved Not involved T_20 T_20 Cell None Read & Write None None NSE None Read & Write None None NSE None Read & Write CLOSE None None None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved ON ON BSC6900 None None None BTS None None None BSC6900 None None None None None None None BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None BTS None Read & Write None CLOSE BTS None Read & Write YES YES SCTP link None Read & Write 10 10 SCTP link None Read & Write OFF OFF BSC6900 None Read & Write 0 0 BSC6900 None Read & Write OFF OFF BSC6900 None Read & Write OFF OFF BSC6900 None Read & Write OFF OFF BSC6900 None Read & Write OFF OFF BSC6900 None Read & Write OFF OFF BSC6900 None Read & Write 0 0 BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BSC6900 None Read & Write 0 0 BSC6900 None Read & Write None None BTS None Read & Write ON None BSC6900 None Read & Write None None BSC6900 None Read & Write 0 None BSC6900 None None Cell None Read & Write This parameter is valid only when "UTRANCE Read & Write AISS AISS BTS None Read & Write None None None None Read & Write None None BTS None Read & Write 1 1 BTS None Read & Write 2 2 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 BTS None Read & Write None None None None Read & Write MBSC None None 10 10 Cell None Read & Write This parameter is valid only when "LOADHOE Read & Write None None None None Read & Write YES YES BSC None Read & Write None None None None Read & Write None None None None Read & Write 3000 3000 BSC None Read & Write 5 5 None None Read & Write 60000 60000 MTP3 link None Read & Write 1500 1500 MTP3 link None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 1500 1500 MTP3 link None Read & Write 3000 3000 MTP3 link None Read & Write 1500 1500 MTP3 link None Read & Write 1200 1200 MTP3 link None Read & Write 3000 3000 BSC None Read & Write 5 When the 5 None transmission quality is good, the 12 recommend BTS None The value of this parameter must be smaller Read & Write Read & Write 50 50 Cell None Read & Write 50 50 Cell None Read & Write 200 200 Cell None Read & Write 60 60 Cell None Read & Write 150 150 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 60 60 Cell None Read & Write 60 When the 60 Cell transmission quality is good, the 1 recommend BTS None The value of this parameter must be greater Read & Write Read & Write 360000 360000 MTP3 link None Read & Write 360000 360000 MTP3 link None Read & Write 2000 2000 MTP3 link None Read & Write 10000 10000 BSC 5 5 None None The value of this parameter must be smaller Read & Write Read & Write 7 7 Cell None Read & Write 10 10 Cell None Read & Write 500ms 500ms Cell None Read & Write 500ms 500ms Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 20 20 Cell None Read & Write 10 10 BC None Read & Write 1200 1200 MTP3 link None Read & Write 5000 5000 BSC None Read & Write 1200 1200 MTP3 link None Read & Write 1000 1000 BSC None Read & Write 1200 1200 MTP3 link None Read & Write 3000 3000 BSC None Read & Write 3000 3000 BSC None Read & Write 1200 1200 MTP3 link None Read & Write 4 4 Cell NO NO Cell None Read & Write This parameter is valid only when "IUOTP" in Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved YES YES Cell 0 0 Cell 1 1 Cell 255 255 Cell None This parameter is valid only when "IUOTP" in This parameter is valid only when "HOCTRLS This parameter is valid only when "TAHOEN" Read & Write Read & Write Read & Write Read & Write 0 0 Cell 2 2 Cell None Read & Write This parameter is valid only when "HOCTRLS Read & Write None None BSC6900 1 1 Cell 63 63 Cell None Read & Write This parameter is valid only when "TAHOEN" Read & Write This parameter is valid only when "IUOTP" in Read & Write 10 10 Cell None Read & Write 10 10 Cell None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None 90 90 BTS 90 90 BTS N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "OMLBKUP Read & Write idle mode) This parameter N (No must meet impact on the the UE in following Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved 170 170 MTP3 link None 4000 4000 BSC None 80 80 BTS None ON ON BSC None NO NO TRX None 60 60 Cell None 40 40 Cell None 6 6 Cell None 55 55 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BSC6900 Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 40 40 Cell None Read & Write 6 6 Cell None Read & Write 55 55 Cell None Read & Write 2 2 Cell 3 3 Cell None Read & Write This parameter is valid only when "PWRCTR Read & Write YES YES BSC None Read & Write 60 60 Cell None Read & Write OFF OFF Cell 60 60 Cell 70 70 Cell None "TCHTRIC Read & Write BUSYOVE RLAYTHR" and "TCHTRIB Read & Write "TCHTRIC BUSYOVE RLAYTHR" and "TCHTRIB Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 10 10 MTP3 link None Read & Write Y BSC6900 Less than 5 minutes None None MTP3 link None Not Read & Write involved Not involved Not involved None DISABLE Cell None None None BTS None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None Control plane link None None None Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None Control plane link None Not Read & Write involved Not involved Not involved None None Control plane link None None None None None None None Cell None None None Cell None 0 0 Cell None 8 8 Cell None 0 0 Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 None Cell None Read & Write 0 0 Cell None Read & Write NO NO Cell None Read & Write NO NO Cell None Read & Write 10 10 Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write NO NO Cell None Read & Write None None Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 20 20 BSC6900 None Not Read & Write involved Not involved Not involved 15 15 BSC6900 None Not Read & Write involved Not involved Not involved None None Control plane link None Read & Write Y Subrack connection Less than path 5 minutes None None Control plane link None Read & Write Y 63 63 PBSL None OPEN None None None 45 None None None 0 None None 500 500 BTS 500 500 BTS 0 0 BTS 0 0 BTS None This parameter must be at least 3C greater This parameter must be at least 4C greater This parameter must be at least 3C lower than This parameter must be at least 4C lower than 800 800 BTS None None None Cell None None None None None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Subrack connection Less than path 5 minutes The services are interrupted BSC until the Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None Read & Write None None None None Read & Write 65 For 65 BTS EPS4815 boards, the value of this -100 parameter is BTS None Read & Write None Read & Write -100 -100 BTS None Read & Write YES YES BSC None Read & Write 30 30 BSC None None Cell None The maximum length of this parameter Read & Write Read & Write OFF OFF Board None Read & Write None None None None Read & Write 65535 65535 Cell None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None BSC6900 None Read & Write 5000 5000 BSC None Read & Write 264 264 BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 264 264 BTS None 10 10 Cell None 6 6 Cell None 4 4 Cell None 8 8 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 4 4 Cell None Read & Write 3 3 Cell None Read & Write 6 6 Cell None Read & Write 3 3 Cell None Read & Write 2 2 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None 5 5 BSC 30 30 Cell 1 1 Cell 4 4 Cell 80 80 Cell 6 6 Cell None This parameter is valid only when "TIGHTBC This parameter is valid only when "TIGHTBC This parameter is valid only when "TIGHTBC This parameter is valid only when "TIGHTBC This parameter is valid only when "TIGHTBC Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 3 3 Cell This parameter is valid only when "TIGHTBC Read & Write OFF OFF Cell None Read & Write 40 40 Cell 5 5 BSC None Read & Write This parameter is valid when "MSCPOO Read & Write NOLIMIT NOLIMIT BSC6900 None Read & Write None None BSC6900 None Read & Write None None BTS None Read & Write 10 10 Cell None Read & Write 10 10 Cell 10 10 Cell None Read & Write This parameter is valid only when "IUOTP" in Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not Involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 2000 Ethernet 2000 port None Not Read & Write involved Not involved Not involved 3000 3000 None None Not Read & Write involved Not involved Not involved 2 Ethernet 2 port None Not Read & Write involved Not involved Not involved 2 Ethernet 2 port None 2 2 BTS None 10 10 Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved 4 Ethernet 4 port NO NO 30 30 40 40 8 8 5 5 None None None None Not Read & Write involved N (No impact on the UE in Cell None Read & Write idle mode) N (No impact on the UE in Cell None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in Cell "IUOTP" in Read & Write idle mode) N (No impact on the UE in Cell None Read & Write idle mode) This parameter N (No is valid impact on when the UE in BSC "MSCPOO Read & Write idle mode) N (No impact on the UE in BSC6900 None Read & Write idle mode) This parameter is valid only when Not Subsystem "IDXTYPE" Read & Write involved None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 45 If "APMU 45 BTS Board Type" is "EPS4815", -19 the BTS None Read & Write -20 -20 BTS None The value Read & Write of this parameter must be at least two Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write None None BSC6900 None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None None Read & Write The TRMMAP index is configured by setting Read & Write None None BC None Not involved N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None None None Read & Write 3 3 Cell None Read & Write 0 None BSC6900 None Read & Write None None BSC None Read & Write 0 None BSC6900 None Read & Write 12000 12000 MTP3 link None Read & Write 60000 60000 MTP3 link None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None TRRS TRRS ATERCON SL None None None PBE1T1 None None None BSC6900 None 0 0 Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BSC6900 None Read & Write None None BTS None Read & Write 8 8 Cell None Read & Write 60 60 Board None Read & Write 60 67 Board None Read & Write 50 50 Board None Read & Write 50 62 Board None Read & Write ON ON Board None Read & Write 5 5 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 BSC None N (No impact on the UE in Not Read & Write idle mode) involved Not involved M3UA_LOA M3UA_LOADSH DSHARE_M ARE_MOD OD SCCP None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BSC None Not Read & Write involved Not involved Not involved None None IP path None None BSC6900 None None BSC6900 None the Read & Write When value of "ITFT" in "ADD TRMMAP" Read & Write When the value of "ITFT" in "ADD TRMMAP" Read & Write Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC6900 None None None BTS None NO NO BTS None NO NO BTS None NO NO BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved NO NO BTS None Read & Write None None None None Read & Write 10sec 10sec Cell 90 90 Cell None Read & Write This parameter is valid only when "LOADHOE Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None BSC6900 None Not Read & Write involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved Not involved None None BSC6900 None 2 2 BSC6900 None 2 2 BSC6900 None None None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 2 2 PPP link None Not Read & Write involved Not involved Not involved 2 2 None None N (No impact on the UE in Not Read & Write idle mode) involved Not involved 2 IP logical 2 port None 0 None None The TRM Read & Write load threshold parameter must meet Read & Write None None BTS None Not involved N (No impact on the UE in idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None IP logical port None Not Read & Write involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None Ethernet port None AllowReCheckRe AllowReChe s ckRes Cell None None None None None 255 Physical 255 channel None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) If traffic handover fails after the Read & Write modificatio Not involved Not involved Not involved Not involved Not involved Not involved Cell Less than 1 minute None None TRX None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write None None Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BSC None None None None None None None Physical channel None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 5 minutes Not involved Not involved Cell Less than 1 minute None None TRX None None None BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None TRX None Not Read & Write involved Not involved Not involved None None TRX None YES YES Cell None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None TRX None None None None None the Read & Write When value of "OPMODE" of "BLK E1/T1 link ATERE1T1 Read & Write When the value of "OPMODE" of "BLK E1/T1 link AE1T1" is Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Read & Write Y Cell Less than 5 minutes None None BC None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None PPP link None None None MP link None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BTS None Read & Write Y PPP link Less than 5 minutes None None Cell None None None BTS None NO NO Cell None None None E1/T1 port None None None None None None None BTS None None None BSC6900 None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Cell Less than 1 minute Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None N (No impact on the UE in Not Read & Write idle mode) involved Not involved None None BTS None None None BTS None Read & Write Y BTS N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes None None PBSL None Physical 0 If the board 0 channel is configured with two to four TRXs, 20 the TRX 5000 5000 BSC Open Open BSC None None BTS None None BTS None None None None None None Read & Write Y N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None The value Read & Write idle mode) of "Fast N (No Flux impact on Measurem the UE in ent Period" Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) If this parameter N (No is set to impact on “16K”, "Inthe UE in BSC Sub Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) BSC Not involved The services are interrupted until the Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None NO NO BSC None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None BTS None Not Read & Write involved Not involved Not involved 64 Ethernet 64 port None Not Read & Write involved Not involved Not involved 64 Ethernet 64 port 6 6 Cell 0:00 None Cell 0:00 None Cell None DISABLE Cell 80 80 Cell 50 50 BTS 68 68 BTS Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "TURNOFF Read & Write idle mode) The value of this N (No parameter impact on must be the UE in smaller The value Read & Write idle mode) of this N (No parameter impact on must be at the UE in least two Read & Write idle mode) None This parameter is valid only when "TURNOFF When "TURNOFF CELLSTPT IME" < "TURNOFF This parameter is valid only when "TURNOFF Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 BSC6900 None Read & Write 10 10 BSC6900 None Read & Write 5 5 BSC6900 None Read & Write 10 10 BSC6900 None Read & Write 5 5 BSC6900 None Read & Write 5 5 BSC6900 None Read & Write 5 5 BSC6900 None Read & Write TX_32 TX_32 Cell None Read & Write 0 0 Board None. Read & Write 0 0 Board None. Read & Write 0 0 Board None. Read & Write 0 0 Board None. Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 0 0 Board None. Read & Write 0 0 Board None. Read & Write 0 0 Board None. Read & Write 0 0 Board None. Read & Write None None None None IP path Transmissi on resource group None When "GRPT" in "ADD RSCGRP" is set to Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 500 Ethernet 500 port None T_20 T_20 Cell None None None None None None ANY_ERR_ RETURN BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None Cell None Not Read & Write involved Not involved Not involved None None BSC None Read & Write Y BSC Less than 30 minutes None None Cell None None BTS None The value Read & Write range of this parameter varies with Read & Write None None Cell None Read & Write 0 0 BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write 0 0 BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write None None BTS None Read & Write None None BTS None Read & Write 6 6 BSC None Read & Write 0 0 BSC None Read & Write 1 1 BSC None Read & Write 1 1 BSC None Read & Write 10 10 BSC None Read & Write 3 3 BSC None Read & Write 15 15 BSC None Read & Write 5 5 BSC None Read & Write 15 15 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 13 13 BSC None Read & Write 13 13 BSC None Read & Write OFF OFF MSC None Read & Write NO NO BSC None Read & Write 6 6 BSC None Read & Write 0 0 BSC None Read & Write 1 1 BSC None Read & Write 1 1 BSC None Read & Write 10 10 BSC None Read & Write 3 3 BSC None Read & Write 15 15 BSC None Read & Write 1 1 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 15 15 BSC None Read & Write 13 13 BSC None Read & Write 13 13 BSC None Read & Write OFF OFF MSC None Read & Write None None None None Read & Write None None None None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None NSE None Not Read & Write involved Not involved None None NSE None Guests Guests BSC6900 None 80 80 BTS None 64 64 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) NSE Not involved Services are interrupted unless the NSVL Not involved Not involved Not involved Not involved Not involved Not involved 1000 1000 E1/T1 port None Not Read & Write involved Not involved Not involved 90 None None None Read & Write None None BTS 3 3 Cell 14 14 Cell 14 14 Cell 16 16 Cell 16 16 Cell 1 1 Cell 1 1 Cell None This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "BETTERC This parameter is valid only when "BETTERC Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write 5 In Abis over5 BSC TDM transmission , the 180 recommend Cell None Read & Write None Read & Write 15 15 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 10 10 Cell This parameter is valid when "FRINGEH Read & Write 20 20 BSC None Read & Write 32 32 BSC 3 3 Cell 16 16 Cell 16 16 Cell 18 18 Cell 18 18 Cell 2 2 Cell 3 3 Cell None This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR The setting of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write 3 3 Cell 3 3 Cell None The setting Read & Write of this parameter must meet the Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 4 4 Cell The setting of this parameter must meet the Read & Write 15 15 Cell 2 2 Cell 2 2 Cell None The setting Read & Write of this parameter must meet the setting Read & Write The of this parameter must meet the Read & Write 90 90 BSC 5 5 Cell 6 6 Cell 8 8 Cell None This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write 100 100 BSC 0 0 Cell 0 0 Cell 3 3 Cell None This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 Cell 3 3 Cell 5 5 Cell 55 55 Cell This parameter is valid only when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid when "PWRCTR This parameter is valid only when "BQHOEN" Read & Write Read & Write Read & Write Read & Write 60 60 Cell None Read & Write 55 55 Cell 3 3 Cell 3 3 Cell 18 18 Cell 18 18 Cell 1 1 Cell 6 6 Cell None This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 3 3 Cell 1 1 Cell 6 6 Cell 75 75 Cell 30 30 Cell 18 18 Cell 15 15 Cell 19 19 Cell 28 28 Cell 23 23 Cell 31 31 Cell 63 63 Cell This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR This parameter is valid only when "PWRCTR The setting of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the setting The of this parameter must meet the Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 21 21 Cell 25 25 Cell YES YES Cell The setting of this parameter must meet the setting Read & Write The of this parameter must meet the Read & Write This parameter is valid only when "IUOTP" in Read & Write 32 32 BSC None Read & Write NO NO Cell None Read & Write 10 It is 10 Cell recommend ed that the value of this GSM_PHASE_2 parameter is BSC None Generally, Read & Write the value of this parameter is equal to Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None E1/T1 port None 3 3 BSC None 40 40 BTS None 40 40 BTS None 40 40 BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 60 60 BTS None 60 60 BTS None 60 60 BTS None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None None None BTS None Read & Write Y BTS N (No impact on the UE in Not Read & Write idle mode) involved Less than 5 minutes Not involved None None BTS None Not Read & Write involved Not involved Not involved None None BTS None Read & Write Y BTS Less than 5 minutes None None BTS None None None Cell None CS1 CS1 Cell None MCS2 MCS2 Cell None Read & Write Y N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) BTS Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved 20 20 Cell MCS6 MCS6 Cell UNFIXED UNFIXED Cell None Read & Write This parameter is valid only when "EGPRS2A Read & Write This parameter is valid only when "EGPRS2A Read & Write 2000 2000 Cell None Read & Write UNFIXED UNFIXED Cell None Read & Write UNFIXED UNFIXED Cell None Read & Write 40 40 Cell None Read & Write 30 30 Cell 30 30 BTS None Read & Write This parameter is valid only when "ENABLE" Read & Write None None BTS None Read & Write YES YES None None Cell Transmissi on resource group None Read & Write When "ISFIRSTC LASSE" in "ADD Not RSCGRP" Read & Write involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None 4 4 Cell None The following condition must be met: Read & Write Read & Write 6 6 Cell 5 5 Cell None The following condition must be met: Read & Write Read & Write NO NO Cell None Read & Write 120 120 Cell None Read & Write 10 10 Cell None Read & Write 5 5 Cell None Read & Write 5 5 Cell None Read & Write 5 5 Cell None Read & Write 2 2 Cell None Read & Write 2 2 Cell None Read & Write Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved PERMIT PERMIT Cell None Read & Write None None BSC None Read & Write NOTSUPPORT NOTSUPPO RT BSC None Read & Write None None BSC6900 None Read & Write None None None None Read & Write None None BTS None Read & Write None None BTS None Read & Write 50 50 BTS 3 3 Cell 10 10 Cell 35 35 Cell NO NO Cell None This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in This parameter is valid only when "IUOTP" in Read & Write Read & Write Read & Write Read & Write Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 5 5 Cell 5 5 Cell This parameter is valid only when "IUOTP" in Read & Write This parameter is valid only when "IUOTP" in Read & Write None None Cell None Read & Write None None BTS None Read & Write 95 95 BSC None Read & Write NO NO Cell None Read & Write LEVEL0 LEVEL0 None None Read & Write 90 90 BSC None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved DISABLE DISABLE IP path None Read & Write Y IP path Less than 5 minutes None None BSC6900 None Not Read & Write involved Not involved DISABLE DISABLE SCTP link None Read & Write Y DISABLE DISABLE SCTP link None Read & Write Y Not involved The services are interrupted SCTP link until the The services are interrupted SCTP link until the None None BSC6900 None Read & Write Y BSC6900 If the mode is not set back, will interrupt service None None Ethernet port 2 2 BTS None Read & Write This parameter is valid only when "VLANSWI Read & Write Not involved N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved None None Ethernet port None Not Read & Write involved Not involved None None BSC6900 None Read & Write Y BSC6900 None None BSC6900 None None None BSC6900 0 0 BTS NO FULL_RATE_VE R11&FULL_RATE_ VER21&FULL_RATE_ NO FULL_RATE BTS _VER11&FULL_RA TE_VER21&FULL_RA Cell OPEN None None 28 None None Read & Write Y N (No impact on the UE in None Read & Write idle mode) This parameter N (No is valid only impact on when the UE in "VLANSWI Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) N (No impact on the UE in None Read & Write idle mode) BSC6900 Not involved If the mode is not set back, will interrupt service If the mode is not set back, will interrupt service Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 20 None None None Read & Write OPEN None None None Read & Write 57 None None None Read & Write 42 None None None Read & Write YES YES BTS None Read & Write 2 2 Cell None Read & Write 3 3 BTS 20 20 BTS 30 30 BTS None Read & Write This parameter must be at least 0.2 smaller Read & Write This parameter must be at least 0.2 greater Read & Write 2 2 Cell None Read & Write None None BTS None Read & Write 27000 27000 Cell None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved 34000 34000 Cell None Read & Write 26000 26000 Cell 280 280 BSC None of Timer MS Location Response from Read & Write Read & Write 15 15 Cell None Read & Write 4 4 Cell 300 300 BSC None of Timer MS Location Response from Read & Write Read & Write INACTIVE INACTIVE BTS None Read & Write OPEN None None None Read & Write NOLIMIT NOLIMIT BSC6900 None Read & Write None None Cell None Read & Write INACTIVE INACTIVE BTS None Read & Write N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved DENY None BSC None None None BSC6900 None N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved M3UA_ASP M3UA_ASP SCCP 22 22 TRX NO NO TRX 12 12 TRX 8 8 TRX None This parameter is valid only when "WLNKAL This parameter is valid only when "WLNKAL This parameter is valid only when "WLNKAL This parameter is valid only when "WLNKAL NO NO TRX None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Active Active BSC6900 None GSM GSM BTS None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved None None None None Not Read & Write involved Not involved Not involved None None E1/T1 port None Read & Write Y BSC6900 Less than 5 minutes E1 E1 BTS None Read & Write None 90 90 ATERCON 16 SL None Read & Write This parameter is valid only when 90 BTS "OMLBKUP Read & Write This parameter must meet the 90 BTS following Read & Write MSP protect 600 group N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved None None GMT+0800 None BSC6900 None Not Read & Write involved N (No impact on the UE in Read & Write idle mode) Not involved Not involved Not involved Not involved CautionImpact on Radio Network Performance Validation of Modification Introduced in Version Attribute The The parameter smaller the modificatio value of n has no this BSC6900 None impact on parameter V900R011 Radio The The parameter smaller the modificatio value of n has no this BSC6900 None The value impact on parameter V900R011 Radio The The setting of this parameter of this parameter modificatio parameter must be n has no affects the BSC6900 greater impact on access V900R011 Radio The BTS should be Versions reset to earlier than validate the BSC6900 None parameter None V900R011 Equipment The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 Equipment The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 Equipment The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 Equipment The parameter modificatio n has no BSC6900 None impact on None V900R011 Transport This The parameter parameter Versions should be modificatio earlier than set to ON n has no BSC6900 when the impact on None V900R011 Transport The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 Equipment The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 Equipment The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 Radio None None If this parameter is set too high, a normal None None None None None None This parameter is valid only when "BSSPAGI ACS is usually set to 0 because system The number of the chosen data rates must be The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions The earlier than throughput BSC6900 is affected. V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions The ACS earlier than may affect BSC6900 the MOS. V900R011 None Radio Equipment Radio Radio Radio Radio Transport Transport Radio Radio Radio The number of the chosen data rates must be The number of the chosen data rates must be None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions The ACS earlier than may affect BSC6900 the MOS. V900R011 Radio Versions The ACS earlier than may affect BSC6900 the MOS. V900R011 Radio Versions earlier than BSC6900 None V900R011 Equipment None None None None None The switching from an intra-cell handover BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Equipment Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Transport None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The radio link should be reestablish None ed after the The radio link should be reestablish None ed after the The radio link should be reestablish None ed after the The radio link should be reestablish None ed after the The radio link should be reestablished None afterradio The the link should be reestablished None afterradio The the link should be reestablish None ed after the The radio link should be reestablish Nonea ed after the With The good anti- parameter interferenc modificatio e n has no capability, impact on None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to earlier than OPEN, the BSC6900 acoustic V900R011 None Equipment Equipment Equipment Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None If this parameter is set to higher value, BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio With a good antiinterferenc e capability, The parameter cannot be modified. The parameter modificatio n has no impact on If this parameter is set to higher value, Nonea With good antiinterferenc e capability, With a good antiinterferenc e capability, None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Not involved If this parameter is set to higher value, If this parameter is set to higher value, None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment Equipment Equipment Equipment Equipment Equipment Equipment If this parameter is set to a greater value, TRX None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The radio link should be reestablish ed after the The radio link should be reestablish ed after the The radio link should be reestablish ed after the The radio link should be reestablish ed after the The radio link should be reestablish ed after the The radio link should be reestablish ed after the The radio link should be reestablish ed after the None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to earlier than OPEN, the BSC6900 voltage V900R011 None Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is valid modificatio only when n has no "SUPPOR impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Transport Radio None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Transport Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment None None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio BSC6900 None this V900R011 Radio When parameter is set to YES and BSC6900 the value V900R011 Radio Versions earlier than BSC6900 None V900R011 Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None If this parameter is set to a smaller value, If this parameter is set to a greater value, None None None If this parameter is set to a greater value, If this parameter is set to a greater value, If this switch is turned on, AMR FR calls can If this parameter is set to a greater value, the If this parameter is set to a greater value, only If this parameter is set to a greater value, the Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, MSs If this parameter is set to a greater value, MSs If this parameter is set to a greater value, the If this parameter is set to a greater value, only If this parameter is set to a greater value, MSs None If this parameter is set to a greater value, If this parameter is set to a smaller value, calls If this parameter is set to a smaller value, call If this parameter is set to a smaller value, fast If this parameter is set to a smaller value, fast If this parameter is set to a smaller value, fast Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a smaller value, call None If this parameter is set to a greater value, If this parameter is set to a smaller value, the None None If this parameter is set to a greater value, cell When this parameter is set to YES and BSC6900 the value V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The radio link should be reestablish ed after the The radio link should be reestablish ed after the The radio link should be reestablish ed after the The parameter modificatio n has no impact on None None None If this parameter is set to a greater value, If this parameter is set to a greater value, None None None If this parameter is set to OPEN, the noise can None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Equipment Equipment Equipment Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport The adjacent node ID must be configured. None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The radio link should be reestablish ed after the The radio link should be reestablished afterradio The the link should be reestablish ed after the The radio link should be reestablish ed after the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to earlier than OPEN, the BSC6900 noise can V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Transport Equipment Equipment Equipment Equipment Equipment Radio Equipment Equipment None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved This The parameter parameter is valid modificatio only when n has no "AqmSwitc impact on This The parameter parameter is valid modificatio only when n has no "AqmSwitc impact on This The parameter parameter is valid modificatio only when n has no "AqmSwitc impact on This The parameter parameter is valid modificatio only when n has no "AqmSwitc impact on This The parameter parameter is valid modificatio only when n has no "AqmSwitc impact on This The parameter parameter is valid modificatio only when n has no "AqmSwitc impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Transport Transport Transport Radio Radio Radio Radio Radio Radio None This parameter is valid only when "AqmSwitc None None None None None None To modify this parameter, run "STP GATEWAY To modify this parameter, run "STP GATEWAY The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Equipment Equipment Equipment Equipment Equipment Transport Transport Equipment None BSC6900 V900R011 Equipment The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Before The enabling parameter this modificatio function, n has no ensure that impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None If this parameter is set to YES, the BSC6900 voice V900R011 Radio Versions earlier than BSC6900 None V900R011 Radio Versions earlier than BSC6900 None V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than higher BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Radio Radio Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio Radio Radio Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 None value, V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The BSC should be Versions reset to earlier than validate the BSC6900 None parameter None V900R011 The parameter modificatio n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Equipment Equipment Equipment Transport Equipment Transport Equipment Transport Transport Transport Equipment Equipment The parameter cannot be modified. The ATT must be set to the same value for None None None None None Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Equipment Equipment Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Transport Transport None None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the Negotiation can succeed only when the port The can be set to the DOWN or UP state The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to modificatio YES, the n has no BSC load impact on None None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment The auto negotiation mode of FE port on the IP- The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None mode impact on If the The is not parameter consistent, modificatio will n has no interrupt impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None Versions earlier than BSC6900 V900R011 Transport None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Equipment Equipment Equipment Equipment Equipment Each backplane board 8K clock has only one Each backplane board 8K clock has only one None None None None None To modify this parameter, run "STP GATEWAY To modify this parameter, run "STP GATEWAY None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Radio Transport Transport Transport Equipment Equipment Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The parameter BSC6900 modificatio should be n should reset to be validate the None None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Transport None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The cell should be activated after the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Equipment Transport Equipment None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Radio Radio Transport None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Radio None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None To disable impact on The the alarm parameter blink filter modificatio function, n has no set this impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, the If this parameter is set to a greater value, None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Transport Transport Equipment None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment To enable the alarm blink filter function, set "Alarm None None None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. If the value of this parameter is too small, the The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment None None None Not involved None Not involved None Not involved None The parameter modificatio n has no impact on None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None the impact on When The M900/M18 parameter 00 BSC is modificatio upgraded n has no to impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Equipment Equipment Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Transport Transport Transport Transport Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Equipment As defined in the protocol, the value of this None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The setting of this parameter may affect the MS None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Equipment Transport Equipment None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Radio Radio Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio If "MR.Prepr ocessing" is set to BTS_Prepr None A paging block (four continuous CCCH timeslots) None None None None This parameter is valid on a per cell basis and None None None If certain link is occupied, conversion from E1 to The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Radio Equipment Equipment Radio Equipment Equipment Equipment Transport None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None Not involved None Not involved None None The parameter cannot be modified. The parameter cannot be modified. Not involved None The parameter modificatio n has no impact on None Not involved None None None None None The parameter cannot be Not modified. involved Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Not involved None None None None Not involved Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Transport Equipment Equipment Equipment Equipment Equipment Equipment None The parameter cannot be Not modified. involved The parameter modificatio n has no None Bar impact on If BTS The Code is parameter incorrect, modificatio the OML n has no between impact on The BTS should be reset to validate the None parameter The This parameter parameter modificatio cannot n has no contain #. impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Equipment Transport Transport Equipment Transport Transport Equipment Transport Not involved BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter can be set modificatio to n has no BTS_Prepr impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on This The parameter parameter is required modificatio only by n has no BTSs in IP impact on The parameter modificatio n has no None impact on None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None If this parameter is set to BTS_Prepr ocessing, None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Not involved BSC6900 V900R011 Radio None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment The parameter modificatio n has no None impact on For a The doubleparameter transceiver modificatio BTS or an n has no NGBTS, impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this parameter is set to a smaller value, the None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment Not involved BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Transport The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved None Versions earlier than BSC6900 V900R011 Radio None None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Transport Transport Transport Transport Transport Transport Transport Transport Transport The parameter cannot be modified. The parameter cannot be modified. Not involved None None None None None None None None None None The parameter cannot be Not modified. involved Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Equipment None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None The parameter cannot be modified. The parameter cannot be modified. If the value of "Cell Bar Access" is YES and the value The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Call reestablish ment can decrease the call Versions earlier than BSC6900 V900R011 Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None Not involved None Not involved None The parameter modificatio n has no impact on None None None Not involved None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Transport Transport Transport Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None value impact on If the The of "Cell Bar parameter Access" is modificatio YES and n has no the value impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 If this parameter Versions is set to earlier than smaller BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Transport Radio Radio Radio Radio Equipment Radio Radio Transport The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter applies to modificatio only the n has no EDGE trx. impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio needs n has no negotiation impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Radio Radio Radio Radio Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Not involved None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Radio Radio None This feature only applies to the areas BSC6900 V900R011 Equipment None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set too earlier than small, the BSC6900 congestion V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Equipment Equipment Equipment Radio Radio Equipment Equipment Equipment Transport None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None The congestion start threshold must be The congestion start threshold must be None None None The congestion start threshold must be The congestion start threshold must be The congestion start threshold must be None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Transport Transport BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None The setting V900R011 of this parameter depends BSC6900 on the V900R011 None Radio Equipment Radio Transport Transport Transport Radio None None None This function can be activated only when None None None The purpose of setting this parameter is to avoid None the When network status is poor, the check None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Equipment Equipment None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on This The parameter parameter is modificatio supported n has no only by the impact on This The parameter parameter is modificatio supported n has no only by the impact on The The checksum parameter mode need modificatio the n has no negotiation impact on The The checksum parameter mode need modificatio the n has no negotiation impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on This The parameter parameter is modificatio supported n has no only by the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Equipment Equipment Transport Transport Transport Transport None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None This parameter is supported only setting The by the of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Radio None None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None The smaller the value of this parameter None None can The CI be input in hexadecim al format. The 1. The block of A interface must be configured. The parameter cannot be modified. The setting of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation The setting of this parameter needs negotiation The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Transport Radio Radio Radio Radio Radio The setting of this parameter needs negotiation The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The BTS should be reset to validate the None parameter The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None want impact on If you The board to modify should be the value reset to of "Clock validate the board type" parameter The parameter modificatio n has no None impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Radio Equipment Equipment Radio Radio None BSC6900 V900R011 Transport None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Equipment None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None The value of this parameter cannot be Not changed. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on 1. If you The set "Upper parameter count modificatio threshold n has no of If you impact on 1. raised The set "Upper parameter count modificatio threshold n has no of raised impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None None None None The parameter cannot be modified. This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 This parameter Versions can be earlier than used to BSC6900 limit the V900R011 Versions earlier than BSC6900 None V900R011 None Equipment Equipment Radio Equipment None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Not involved None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Transport Transport Transport This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Transport Transport Transport Transport Radio Transport Equipment None None None None The parameter cannot be modified. The parameter cannot be modified. This parameter cannot be set to YES for the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Transport Not involved Not involved The parameter modificatio n has no impact on The parameter modificatio n has no None impact on This The parameter parameter is not modificatio supported n has no by the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 The MS cannot Versions respond to earlier than the paging BSC6900 during the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None If this parameter is set to a smaller value, If this parameter is set to a smaller value, Radio Radio Radio Transport Transport Equipment Equipment Equipment Radio Equipment Equipment None None The settings of RXLEVACCESSMIN and None The parameter is related to practical networking The modificatio n of the parameter affects the The modificatio n of the parameter affects the The modificatio n of the parameter affects the The modificatio n of the parameter affects the The larger the value of this parameter, the higher None The modificatio n of the parameter affects the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None value V900R011 If the of this Versions parameter earlier than is too high, BSC6900 the V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Equipment Transport Transport Transport Transport Transport Radio Equipment Transport The modificatio n of the parameter affects the The modificatio n of the parameter affects the The modificatio n of the parameter affects the The larger the value of this parameter, the higher None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Radio None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Transport Transport Transport Transport Transport None None None None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Transport If this parameter of an activated BTS is If this parameter of an activated BTS is The BTS should be reset to validate the parameter The BTS should be reset to validate the parameter The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio needs n has no negotiation impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment Radio Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on When The running parameter this modificatio command, n has no the source impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on This The BTS parameter should be can be reset to modified validate the only when parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment None timer If this is set to a greater value, channel None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Transport Equipment Equipment Transport Transport Transport Transport None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None. None None None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The cell should be activated after the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 None If this timer V900R011 is set to a Versions greater earlier than value, BSC6900 channel V900R011 Versions earlier than BSC6900 None V900R011 None Radio Radio Equipment Equipment None None Not involved Not involved Not involved None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Transport None Not involved None The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on This The parameter parameter takes modificatio effect only n has no when the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment None BSC6900 V900R011 Transport BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this function is Versions enabled, earlier than number of BSC6900 signaling V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Equipment Equipment Radio Equipment Equipment Equipment None The setting of this parameter needs negotiation None value If the of this parameter is YES, the intra-BSC If this parameter is set to 15, this protection None This parameter applies to only the doubleThis parameter applies to only the double- None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Equipment Radio Radio None BSC6900 V900R011 Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is related modificatio to the n has no actual impact on If this The parameter parameter is set to a modificatio small n has no value, the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Equipment None BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 The throughput Versions of the earlier than GPRS BSC6900 service is V900R011 Versions earlier than BSC6900 None V900R011 None If this parameter is set to a smaller value, call Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None Generally, the value of this parameter does not This parameter is used for the adaptive Generally, the value of this parameter does not Generally, the value of this parameter is fixed to None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 None Radio Radio Radio Radio Radio None None None The setting of this parameter affects the triggering The setting of this parameter affects the triggering None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None If this parameter is set to a greater value, If this parameter is set to a smaller value, the If this parameter is set to a smaller value, the None None If this parameter is set to a greater value, If this parameter is set to a greater value, None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 If this parameter is set improperly BSC6900 to a small V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 The coding Versions rate and earlier than MOS are BSC6900 affected. V900R011 The coding Versions rate and earlier than MOS are BSC6900 affected. V900R011 The coding Versions rate and earlier than MOS are BSC6900 affected. V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Radio Radio Radio None BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None The downlink power control (at the BTS During upgrade, pay more attention to the setting None None None None None None None None do If you not use a dualantenna to receive The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 As the double Versions antenna earlier than gain BSC6900 increases, V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Equipment Equipment None The parameter cannot be modified. 1. The block of A interface must be configured. The parameter modificatio n has no impact on None None None The parameter cannot be modified. The parameter cannot be modified. Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Not involved None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Equipment Transport Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It This parameter can be added and modified. It None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Transport Transport Transport Transport Transport Transport Equipment Equipment Equipment None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None The priority impact on The of the parameter signaling modificatio link should n has no be the impact on The parameter cannot be Not modified. involved The The existing parameter networking modificatio can be n has no affected impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n does not None impact the The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Transport Transport Transport Transport Transport Transport Equipment Equipment Equipment None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment None None None None The parameter cannot be Not modified. involved None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None Not involved None The parameter modificatio n has no impact on None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Transport Transport Transport Transport None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio None None None None None None None This parameter can be modified only when None This parameter can be modified only when None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The BTS should be reset to validate the parameter The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Transport None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None It is used impact on The for parameter interworkin modificatio g with n has no products of impact on The parameter modificatio n has no None impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on The The address parameter must exist modificatio and n has no respond to impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport Not involved BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Equipment Equipment Equipment Transport None None It is recommen ded that this parameter None None None None None 1. If you set the start date or end date of daylight None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, the None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Equipment Equipment Equipment Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater or BSC6900 a smaller V900R011 None Equipment Equipment Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None If this parameter is set to a greater value, the If this parameter is set to a greater value, the If this parameter is set to a greater value, If this parameter is set to a greater value, BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on For the The modificatio parameter n of the modificatio parameter, n has no See the impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on None None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Radio Radio Radio Transport Transport Transport Equipment None This parameter is supported only by the None The value of this parameter must be the same None None None None 1. The block of A interface must be configured. None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Equipment Equipment Equipment Equipment Transport Equipment Equipment The parameter modificatio n has no None impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on 1. The The block of parameter Ater modificatio interface n has no must be impact on 1. The The block of A parameter interface modificatio must be n has no configured. impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 The number of block retransmis BSC6900 sions is V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, V900R011 Equipment Radio Equipment Transport Transport Radio Equipment Equipment Radio Equipment Radio Radio None None None BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The If this parameter parameter Versions modificatio is set to a earlier than n has no greater BSC6900 None impact on value, V900R011 The radio If this link should parameter be reis set to established OPEN, the BSC6900 None after the speech V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 None None If this parameter is set to a greater value, the If this parameter is set to NO, the forced The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, If this parameter is set to a greater value, Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment Equipment Radio Radio Transport Transport Radio Equipment Equipment Radio None None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None BSC6900 V900R011 Transport Not involved None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Not involved The parameter modificatio n has no impact on BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None timer V900R011 If this is set to a Versions greater earlier than value, BSC6900 channel V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Transport Transport Transport Transport Transport Equipment Radio Radio Radio Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Radio Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None. None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None. V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio Equipment Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None value impact on If the The of this parameter parameter modificatio is too n has no small, impact on The parameter modificatio n has no None impact on The cell should be activated after the None parameter None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Radio Equipment None BSC6900 V900R011 Radio None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, call V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Transport Radio Radio Equipment Equipment Equipment Equipment Equipment None None None None None None None None The parameter cannot be modified. Negotiation can succeed only when the Negotiation can succeed only when the The parameter modificatio n has no impact on The board should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Radio Equipment Transport Transport Transport Transport None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None Not involved None None This parameter can be modified only when None Negotiation fails if this parameter is modified. Negotiation fails if this parameter is modified. None None None None Not involved The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Transport Transport Equipment Equipment Radio Radio None None None The value ranges of frequency numbers vary with None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None You must impact on The cell deactivate should be the cell activated before after the modifying parameter The parameter modificatio n has no None impact on None None None This parameter affects only the statistical This parameter affects only the statistical This parameter affects only the statistical This parameter affects only the statistical This parameter affects only the statistical This parameter affects only the statistical This parameter affects only the statistical Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Radio Equipment Radio Equipment Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None None None If this parameter is set to a small value, error None Negotiation can succeed only when the Negotiation can succeed only when the None The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Radio Radio Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Transport Transport Transport Transport The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The default impact on The value of parameter "MS_TXP modificatio WR_MAX_ n has no CCH" in impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on In "EXP The ELABEL", parameter the "FN" modificatio parameter n has no cannot be impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The radio link should be reestablish None ed after the The parameter modificatio n has no None impact on None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio When this parameter is set to YES, during the None None This parameter can be modified only when The adjacent node ID must be configured. None None None No_HC: disable the header compressi on None BTS For a of the BTS3X series, the value of None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to YES, the speech None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport None This technology prevents the loss of measurem The discontinuo us transmissi on (DTX) BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None The value range of this parameter depends If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, If the BCCH frequency of a cell is changed, None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None BSC6900 V900R011 Radio None None This parameter is valid in only the cells in the None None None This parameter can be modified only when None This parameter can be modified only when None The FACTORT ABLE must be configured. The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The setting of this parameter must be consistent Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 The discontinuo Versions us earlier than transmissi BSC6900 on (DTX) V900R011 Radio Radio Radio Radio Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Transport Transport The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved None If this parameter is set to a greater value, the If this parameter is set to a smaller value, the If this parameter is set to a greater value, the If this parameter is set to a greater value, If this parameter is set to a smaller value, the If this parameter is set to a greater value, None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Radio Radio Radio Radio Transport Transport Transport Transport Transport The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. Not involved None Not involved None Not involved None Not involved None None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None None This parameter determines whether to load value The data of this parameter is valid only for the None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Equipment Radio Radio Transport Equipment Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None None None None This parameter is supported only by the This parameter is supported only by the None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Equipment Equipment Radio Equipment Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio The parameter cannot be modified. The parameter cannot be modified. Not involved None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Not involved None The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Transport None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Transport None BSC6900 V900R011 Equipment BSC6900 V900R011 Radio Versions earlier than BSC6900 None V900R011 Radio If this parameter Versions is set to a earlier than greater BSC6900 value, only V900R011 Radio None None None None None None None None None None None This parameter is supported only by the This parameter is supported only by the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None If this parameter is set to a greater value, the If this parameter is set to a greater value, only If this parameter is set to a greater value, None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Equipment Equipment Transport None If this parameter is set to a greater value, the If this parameter is set to a greater value, None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment Equipment If the TRXs in a cell under this BSC6900 are at a The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None this impact on When The parameter parameter is set to modificatio No, n has no Highest impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Not involved None None None None None None This parameter limits the number of candidate This parameter limits the number of candidate None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Radio Equipment Radio Equipment Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None If this parameter is set to YES, the probability If this parameter is set to a great value, If this parameter is set to a great value, If this parameter is set to a smaller value, If this parameter is set to a greater value, the If this parameter is set to a greater value, the If this parameter is set to a too great value, the If this parameter is set to a greater value, the Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, call V900R011 Radio Radio Radio Radio Radio Radio Radio Radio None None None The value of this parameter cannot be Not changed. involved The parameter modificatio n has no None The value impact on The cell of this should be parameter activated must be after the the same parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The cell should be activated after the None parameter The parameter cannot be Not modified. involved After this The cell parameter should be is activated modified, after the the parameter The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a smaller value, call Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to earlier than "NO_FH", BSC6900 the antiV900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, it is V900R011 None Radio Radio Radio Radio Equipment Equipment Radio Radio None None None None None None the Before modificatio n, the cell mapping table None Set this parameter properly to ensure that hierarchica None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The cell should be activated after the parameter The cell should be activated after the parameter None If this parameter is set to a too great value, the None If this parameter is set to a greater value, If this parameter is set to a greater value, If this parameter is set to a greater value, BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Transport Equipment Radio Radio Radio Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None are impact on HSNs The cell optional for should be the cells activated with after the frequency parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None The discontinuo us transmissi on (DTX) None The discontinuo us transmissi on (DTX) None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Equipment Radio Radio Radio Radio Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is modificatio supported n has no only by the impact on None None None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment For details of the timer, see ITU-T Q.714. The The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None For details impact on The of the parameter timer, see modificatio ITU-T n has no Q.714. The impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None Versions earlier than BSC6900 V900R011 Transport None BSC6900 V900R011 Equipment None BSC6900 V900R011 Transport BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 If this parameter is set to a greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Transport Transport Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None If this parameter is set to a greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 If this parameter is set to a greater BSC6900 value, the V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The parameter parameter IBCA modificatio Allowed of n has no the serving impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None If this parameter is set to a greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, the Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to earlier than YES, cell BSC6900 congestion V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None the When network status is poor, the packet None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value and V900R011 Equipment Equipment Transport Transport Transport Transport Equipment Equipment Equipment Equipment Equipment Radio None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None timer V900R011 If this is set to a Versions greater earlier than value, BSC6900 channel V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 None Equipment Radio Radio Equipment Radio Radio Radio Radio Radio None None None BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The If this parameter parameter Versions modificatio is set to a earlier than n has no greater BSC6900 None impact on value, V900R011 The parameter modificatio n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 This The BTS parameter should be Versions can be reset to earlier than modified validate the BSC6900 only when parameter None V900R011 None None If this parameter is set to a smaller value, the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to YES, the call None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Equipment Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter must be modificatio equal to or n has no less than impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None If this parameter is set to a greater value, the If this parameter is set to a greater value,value If the the of this parameter is set too high,setting The the of this parameter affects the MOS. The setting of this parameter affects the MOS. The setting of this parameter affects the BSC6900 MOS. V900R011 Versions earlier than BSC6900 None V900R011 BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Radio Radio Equipment Radio Radio Radio Transport None None None BSC6900 V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 None value, V900R011 Versions earlier than BSC6900 None None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 This The BTS parameter should be Versions can be reset to earlier than modified validate the BSC6900 only when parameter None V900R011 The BTS should be Versions reset to earlier than validate the BSC6900 None parameter None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Transport Radio Transport Equipment None The parameter cannot be modified. This parameter can be modified only when The parameter cannot be modified. This parameter can be modified only when The parameter modificatio n has no impact on None Not involved None The BTS should be reset to validate the parameter None None None None None None None None Not involved The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None If this parameter is set to a greater value, call If this parameter is set to a greater value, the If this parameter is set to a greater value, Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Radio Transport Radio Radio Radio Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on 1. The Interferenc parameter e band 0 is modificatio not n has no counted in impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Transport Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter If this parameter is set to a greater value, Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None timer V900R011 If this is set to a Versions greater earlier than value, BSC6900 channel V900R011 None timer If this is set to a greater value, channel Radio Radio Radio Radio Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Equipment Equipment Equipment Equipment Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Transport The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. Not involved None Not involved None None None None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Equipment Equipment Equipment Equipment Equipment Transport Transport Not involved BSC6900 V900R011 Transport Not involved BSC6900 V900R011 Transport Negotiation can succeed only when the No_HC: disable the header compressi on The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Not involved None Not involved The parameter modificatio n has no None impact on This The BTS parameter should be depends reset to on the type validate the of the parameter This The BTS parameter should be must be reset to set validate the according parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport None BSC6900 V900R011 Transport None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Equipment None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None cell impact on Each The cell can be should be configured activated with only after the one TRX parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The The parameter parameter IPPATH modificatio must be n has no configured impact on The parameter modificatio n has no None impact on The BTS should be reset to validate the parameter None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Transport None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Transport Radio Radio None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Transport Transport None BSC6900 V900R011 Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Radio Equipment Radio Equipment The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio must be n has no consistent impact on The setting The of this parameter parameter modificatio must be n has no consistent impact on The setting The of this parameter parameter modificatio must be n has no consistent impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Radio Radio Radio Radio Radio Equipment Equipment Equipment Equipment Equipment None None The setting of this parameter must be consistent The setting of this parameter must be consistent The setting of this parameter must be consistent It is used for interworkin g with products of None 1. This command is applicable to the None 1. This command is applicable to the The setting of this parameter must be negotiated None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport The parameter modificatio n has no None impact on The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio must be n has no negotiated impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Radio None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Transport Equipment Equipment Equipment Equipment None None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Not involved None None None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Transport Transport Transport Transport Transport Radio Radio Equipment None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Transport Transport Equipment None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Transport Radio Radio Radio None None None None None None The parameter cannot be modified. This parameter must be less than "UHUMTH The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, If this parameter is set to a greater value, None None None None None None None The parameter cannot be Not modified. involved None The parameter modificatio n has no None impact on None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Equipment Transport Equipment Equipment Equipment None BSC6900 V900R011 Equipment BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment BSC6900 V900R011 Radio The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio must be n has no consistent impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved According The to the parameter MTP3 load modificatio sharing n has no principle, impact on The mask The is parameter calculated modificatio according n has no to the link impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than too small BSC6900 value, the V900R011 Transport Equipment Equipment Equipment Equipment Equipment Equipment Transport Transport Transport Transport Radio The parameter modificatio n has no None impact on This The parameter parameter is valid modificatio only when n has no "NC2Load impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, it is V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, it is V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Equipment Radio Radio Radio Radio Radio Radio Radio Radio Equipment The function of cell load reselection is valid None None None None None None The parameter cannot be modified. The local IP address and peer IP must be configured The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Transport None None None The parameter cannot be Not modified. involved Not involved The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The BTS should be reset to validate the parameter None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Transport Transport Equipment None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None The both impact on The end parameter address of modificatio the SCTP n has no is the The both impact on The end parameter address of modificatio the SCTP n has no is the impact on The parameter modificatio n has no None impact on The The parameter parameter can be modificatio modified n has no when impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment Not involved None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Equipment Transport Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None It is valid when "LOGPOR TFLAG[/P ARA in the It is valid when "LOGPOR TFLAG[/P ARA in the None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment None None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Not involved None Not involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on 1. When The the peer parameter end modificatio unconditio n has no nally impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to modificatio REMOTE_ n has no LOOP and impact on None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Not involved None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Radio Equipment Equipment Equipment When the loopback type is changed to REMOTE_ The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on For the The BTS3002C parameter , if each modificatio cell is n has no configured impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved None Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Radio Equipment Radio Equipment Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Transport Radio Equipment Equipment Transport Equipment Equipment Equipment Equipment Equipment None This parameter must be less than "UTEMTH Generally, the value of this parameter doesvalue The not of this parameter decides whether Generally, the value of this parameter does not Generally, the value of this parameter is fixed to None None None The parameter modificatio n should be None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BSC6900 should be reset to validate the The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Transport Transport Not involved BSC6900 V900R011 Transport The parameter modificatio n has no Not None are impact on involved If there The fewer parameter frequencie modificatio s in a n has no frequency impact on None The parameter cannot be Not modified. involved None this The When parameter parameter modificatio is set to n has no YES, the None impact on network The When this parameter parameter modificatio is set to n has no YES, the None impact on network The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter cannot be Not Not modified. involved involved The BTS should be reset to validate the None parameter None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Transport Equipment Equipment Equipment Equipment Equipment Transport Equipment BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None None None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None Not involved None Not involved Not involved None The parameter cannot be Not modified. involved Not involved None The parameter modificatio n has no impact on None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Equipment Equipment Equipment Transport Transport Transport Transport Transport The parameter cannot be modified. The parameter cannot be modified. Not involved None Not involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The transport path should be reNone established The transport path should be reNone established The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The modificatio parameter n of the modificatio parameter n has no affects the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None If this parameter is set to a smaller value, call None None If this parameter is set to a smaller value, call Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Radio Transport Transport Equipment Equipment Radio Transport Transport Radio None None None None None The adjacent node ID must be configured. 1. In the earlier versions of BSC6000V 900R008C None The value of this parameter cannot be smaller None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Equipment Transport Transport Equipment Equipment Equipment The modificatio n of the parameter affects the The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on You can The increase parameter this value modificatio when the n has no handovers impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Radio Radio Radio Equipment Equipment Radio Radio Radio Radio Radio None PPP If the frame length is larger than this value, None None None If this parameter is set to a smaller value, the None None None Before performing singlepoint positioning, None The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None If this parameter is set to a smaller value, the If this parameter is set to a smaller value, the If this parameter is set to a smaller value, the None None None If this parameter is set to a smaller value, the None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Radio Radio Radio Radio Radio Radio Radio Equipment Equipment Transport Versions earlier than BSC6900 None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None The In a multi- V900R011 parameter band Versions modificatio network, earlier than n has no this BSC6900 None impact on parameter V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The transport Versions path should earlier than be reBSC6900 None established None V900R011 The parameter modificatio n has no impact on If this parameter is set to a smaller value, call Radio Transport Transport Radio Radio Radio Equipment Equipment Radio Radio Transport Transport The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is valid modificatio only when n has no the MCPA impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The Enhanced parameter Measurem modificatio ent Report n has no supports impact on None BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment BSC6900 None V900R011 Equipment In scenarios with heavy traffic, the BSC6900 network V900R011 Radio Versions earlier than BSC6900 None V900R011 Equipment Versions earlier than BSC6900 None V900R011 Transport Versions earlier than Not BSC6900 involved V900R011 Transport Versions earlier than BSC6900 None V900R011 Transport Versions earlier than Not BSC6900 involved V900R011 Transport Versions earlier than BSC6900 None V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio The parameter cannot be modified. The parameter cannot be modified. None None None None None None None None None None Versions earlier than Not BSC6900 involved None V900R011 Versions earlier than Not Not BSC6900 involved involved V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 The transport Versions path should earlier than be reBSC6900 established None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 The This parameter parameter Versions modificatio is used to earlier than n has no limit the BSC6900 impact on number of V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 impact on None V900R011 Transport Transport Transport Transport Transport Radio Transport Radio Radio Equipment Equipment Equipment Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 None value, the V900R011 If this parameter Versions is set to a earlier than greater BSC6900 None value, V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio Radio Radio Transport Transport To modify this parameter, run "STP GATEWAY None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Not involved None Not involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The local impact on The end of the parameter SCTP link modificatio is the n has no server and impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Radio Radio None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Transport Equipment Radio The setting of this parameter must be negotiated The parameter cannot be modified. The parameter modificatio n has no impact on None None None None None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Equipment Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Not involved BSC6900 V900R011 Transport Not involved BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None value V900R011 If the of this Versions parameter earlier than is set too BSC6900 high, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Transport Transport Transport Transport Transport Equipment Transport Transport Equipment Equipment Radio Because the measurem ent reports may not The parameter modificatio n has no impact on The parameter modificatio n has no None this impact on When The parameter parameter is set to modificatio Noreport, n has no the BTSs impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The transport path should be reNone established The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Equipment Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Radio None None MSC If the pool function is enabled, and the If the GSM BSC is connected to the GSM MSC, it is None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None timer V900R011 If this is set to a Versions greater earlier than value, the BSC6900 radio V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Equipment Equipment Equipment Radio Radio Radio Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 This parameter Versions should be earlier than set as BSC6900 required: In V900R011 Versions earlier than BSC6900 None V900R011 Equipment Equipment Equipment Radio Radio Transport None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None This parameter limits the number of candidate None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment None None None None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None Not involved None None None The interconne ction may be affected if this None This parameter is supported only by the None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Equipment Transport Transport Equipment Equipment Radio None. None. None.value If the of this parameter is increased, If this parameter is set to YES, the call drop Negotiation can succeed only when the Negotiation can succeed only when the The adjacent node ID must be configured. None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None. None. None. None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Radio Transport Transport Transport Equipment Transport Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 Nonethe V900R011 Only BTS3X in Versions G3BTS32. earlier than 30000.04.1 BSC6900 130 or later V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Transport Transport Transport Transport Transport Transport Transport Transport Transport Transport None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None this V900R011 When parameter Versions is set to earlier than ENABLE, BSC6900 the MOS V900R011 Equipment Radio Radio Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is valid modificatio only when n has no "NC2SPT" impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None The most V900R011 significant Versions three bits earlier than of BSIC for BSC6900 all cells V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 None value, V900R011 Versions earlier than BSC6900 None None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Radio Transport Transport Radio Equipment Transport Transport Transport Equipment Equipment Radio Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None If this parameter is set to YES, FR calls can If this parameter is set to a greater value, the If this parameter is set to a greater value, only If this parameter is set to a greater value, the If this parameter is set to a greater value, MSs If this parameter is set to a greater value, MSs If this parameter is set to a greater value, the If this parameter is set to a greater value, only If this parameter is set to a greater value, MSs Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None If this parameter is set to a greater value, If this parameter is set to a smaller value, calls None None None The handover decision is allowed only when Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Transport Radio Radio Radio None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is modificatio supported n has no only by the impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Equipment Transport Radio Radio Equipment Radio Radio Radio Versions earlier than BSC6900 None None V900R011 This parameter Versions should be earlier than set to a BSC6900 None small value V900R011 Versions earlier than BSC6900 None None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 If this The parameter parameter Versions is set to a modificatio earlier than larger n has no BSC6900 value, the impact on None V900R011 Negotiation The can parameter Versions succeed modificatio earlier than only when n has no BSC6900 the V900R011 Negotiation impact on None The can parameter Versions succeed modificatio earlier than only when n has no BSC6900 the impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Equipment Radio Equipment Equipment Equipment Equipment Equipment Radio Transport Transport Transport Transport The parameter cannot be modified. The transmissi on priority of the service is The transmissi on priority of the service is None None None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None BSC6900 V900R011 Equipment None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Radio Radio Equipment Transport If the parameter value is set relatively small, the The parameter cannot be modified. The parameter modificatio n has no impact on None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Before The cell modifying should be this activated parameter, after the you must parameter Not involved None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Transport Transport Transport Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None The parameter cannot be modified. The parameter cannot be modified. Primary operator index must be 0. The parameter modificatio n has no impact on None Not involved None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no None impact on 1. The The block of A parameter interface modificatio must be n has no configured. impact on 1. The The block of parameter Ater modificatio interface n has no must be impact on 1. The The block of A parameter interface modificatio must be n has no configured. impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 None Radio Equipment Equipment Transport Transport Transport Equipment Radio Radio None None The setting of this parameter must be consistent None None None None None None None None If this parameter is set to a greater value, too The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio If this parameter is set to a greater value, too None None None None None None None None None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None If this parameter is set to a greater value,value If the of this parameter is set too small, If this parameter is set to a greater value, None If this parameter is set to a greater value, If this parameter is set to a greater value, If this parameter is set to a greater value, If this parameter is set to a greater value, Not involved None Not involved None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Equipment Radio Radio Radio Radio Radio Radio Transport Transport None None None None None None None None None None None The parameter cannot be Not modified. involved The BTS should be reset to validate the parameter The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment BSC6900 None V900R011 Equipment If this parameter is set to a greater BSC6900 value, V900R011 Radio Versions earlier than BSC6900 None V900R011 Equipment Versions earlier than BSC6900 None V900R011 Transport The parameter cannot be modified. The parameter cannot be modified. Not involved None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Radio Radio Radio None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Equipment Equipment Equipment None None None None None If this parameter is set to a greater value, the If this parameter is set to a greater value, the If this parameter is set to a greater value, the If this parameter is set to a greater value, the None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Equipment Equipment Equipment Radio Equipment Equipment Equipment Equipment Equipment Equipment Radio Equipment None None None None None None None None None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Not involved Not involved Not involved BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Properly setting this Versions parameter earlier than can BSC6900 increase V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Equipment Radio Radio Radio Radio Equipment Equipment Equipment Transport Transport Transport None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Equipment Radio Radio Radio Radio Radio Equipment Radio Radio The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. Not involved None Not involved None None None None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Equipment Radio Radio Radio Radio Radio Transport None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None The parameter cannot be modified. The local IP address and peer IP must be configured The parameter cannot be modified. The BTS should be reset to validate the parameter None The BTS should be reset to validate the parameter None The BTS should be reset to validate the parameter None Not involved None The parameter modificatio n has no impact on None Not involved The transport path should be reNone established The transport path should be reNone The both established The end parameter address of modificatio the SCTP n has no is the The both impact on The end parameter address of modificatio the SCTP n has no is the impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Transport Transport Transport Transport Transport Transport Transport Transport Transport The SCTP port number is the parameter None None None None None the When network status is poor, the check None Negotiation fails if this parameter is modified. Negotiation fails if this parameter is modified. None The SIGBVC must be reset after this switch The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The transport path should be reestablished None Versions earlier than BSC6900 V900R011 Transport BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Equipment Radio Radio Radio Radio Equipment Radio Transport Transport Transport Equipment The parameter modificatio n has no None impact on None If this The parameter parameter is set to a modificatio greater n has no value, impact on None If this The parameter parameter is set to a modificatio smaller n has no value, the impact on None The parameter cannot be Not modified. involved None The The adjacent parameter node ID modificatio must be n has no configured. impact on None The The MS parameter calculates modificatio C1 and C2 n has no of the None impact on serving cell The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Transport Transport Radio Equipment Transport Equipment Radio Radio Radio The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is valid for modificatio the EDGE n has no TRX only. impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is valid for modificatio the EDGE n has no TRX only. impact on The parameter modificatio n has no None impact on This The parameter parameter is valid modificatio only for n has no EDGE impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Transport Transport Equipment If "Play switch" is set, the normal calls may None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None The parameter cannot be modified. The parameter cannot be modified. 1. The block of Ater interface must be The parameter cannot be modified. The parameter modificatio n has no impact on None Not involved None Not involved None The parameter modificatio n has no impact on None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None the impact on When The loopback parameter type is modificatio changed to n has no REMOTE_ impact on The parameter modificatio n has no None impact on Not involved None The parameter modificatio n has no impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Transport Transport Equipment Transport Transport Transport Transport Transport Transport The parameter cannot be modified. 1. This command is applicable to the The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. Not involved None The parameter modificatio n has no impact on None Not involved None Not involved None Not involved None Not involved None Not involved None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Equipment Transport Equipment Transport Equipment Equipment Radio The transport path should be reNone established This The parameter transport can be path should modified be reonly when established The BTS should be reset to validate the None parameter The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to a modificatio greater n has no value, the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Equipment Equipment Equipment Equipment None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None Not involved None Not involved The BTS should be reset to validate the None parameter The transport path should be reNone established This The parameter parameter can be modificatio added and n has no modified. It impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Transport Radio Transport Equipment Transport Radio None BSC6900 V900R011 Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved ENABLE: The the parameter multiplexin modificatio g frame n has no function of impact on This The parameter parameter can be modificatio added or n has no modified impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Radio Not involved BSC6900 V900R011 Transport Not involved None None None Not involved None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Transport Transport Not involved BSC6900 V900R011 Radio Not involved None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio When the sampling rate of preprocessed measurem The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None layer impact on Each The has 16 parameter priorities, modificatio numbered n has no 1-16 impact on The parameter modificatio n has no None impact on None None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Radio None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Equipment Equipment Equipment Equipment Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None The routing impact on The priority is parameter modified. modificatio In the case n has no of multiple impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Transport Transport Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None None The parameter cannot be modified. The parameter cannot be modified. 1. This command is applicable to the The modificatio n of the parameter affects the The modificatio n of the parameter affects the The SIGBVC must be reset after this switch The modificatio n of the parameter affects the The modificatio n of the parameter affects the If this parameter is set to a larger value, The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None BSC6900 V900R011 Transport Not involved None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Transport Equipment Transport Transport Transport None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Radio None None The modificatio n of the parameter affects the The modificatio n of the parameter affects the If this parameter is set to a larger value, None This parameter should be set on the basis of None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Transport Transport Radio Radio Radio Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio Equipment Equipment Equipment Equipment None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The line The code must parameter be modificatio consistent n has no with frame impact on The that The structure parameter must be modificatio consistent n has no with frame impact on The that The structure parameter must be modificatio consistent n has no with frame impact on The that The structure parameter must be modificatio consistent n has no with that impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The setting of this parameter affects the GSM None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Transport Transport Transport Transport Transport Transport Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n does not impact the The parameter modificatio n does not impact the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The transmissi parameter on priority modificatio of the n has no service is impact on The The transmissi parameter on priority modificatio of the n has no service is impact on None None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None If the value V900R011 of this Versions parameter earlier than is set BSC6900 inappropria V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Equipment Equipment Radio Equipment Equipment Equipment Transport Transport The transmissi on priority of the service is The transmissi on priority of the service is The transmissi on priority of the service is None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Transport Transport Transport Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None This parameter is supported only by the This parameter is supported only by the None None None This parameter is supported only by the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None If this parameter is set to a greater value, If this parameter is set to a greater value, Radio Radio Radio Radio Equipment Equipment Radio Radio Radio Equipment This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the This parameter is supported only by the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment This parameter is supported only by the This parameter is supported only by the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter should be modificatio set on the n has no basis of impact on For the The BTS3X parameter series and modificatio doublen has no transceiver impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None If this parameter is set to a greater value, the If this parameter is set to a smaller value, the If this parameter is set to a smaller value, the None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to modificatio Algorithm I, n has no the BTS impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None this V900R011 When parameter is set to on, the BSC6900 MOS of a V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Equipment Equipment Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None To improve impact on The the parameter success modificatio rate of n has no reassignm impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to earlier than YES, the BSC6900 BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Equipment Radio Transport Radio Radio Radio Radio Radio Radio Radio Equipment Transport None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Radio Radio Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Radio Radio Radio Equipment Equipment Radio Radio Radio Radio The parameter modificatio n has no None impact on The The parameter parameter must be modificatio set to a n has no value impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The setting The of this parameter parameter modificatio requires n has no negotiation impact on The parameter modificatio n has no None Negotiation impact on The can parameter succeed modificatio only when n has no the impact on None None None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio Equipment Transport Negotiation can succeed only when the None None The range of this parameter is determined If this parameter is set to a greater value, the None None None None The SIGBVC must be reset after this switch None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 None If this parameter is set to a greater value, too Radio Radio Radio Radio Equipment None BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, the V900R011 None Equipment Equipment Equipment Radio None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The BSC should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Radio Radio Radio Transport The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The parameter resource modificatio group must n has no exist. impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, call V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Transport Transport Transport Radio Radio Radio Equipment Equipment Radio None The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None Not involved None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The switch impact on The is off in the parameter case of a modificatio signaling n has no point to the impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no None impact on Not involved None The parameter modificatio n has no impact on None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Transport Equipment Radio Equipment Equipment Transport Radio Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the Change this parameter will impact the The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio must be n has no negotiated impact on None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport The routing context must be unique and needs to The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The value impact on The should be parameter greater modificatio than n has no "RTOMIN" The The value impact on should be parameter greater modificatio than n has no "RTOMIN" impact on The value The should be parameter smaller modificatio than n has no "RTOMAX" impact on The parameter modificatio n has no None impact on None Versions earlier than BSC6900 V900R011 Transport None. BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None this V900R011 When parameter is set to on, the BSC6900 MOS of a V900R011 None. Equipment Equipment Equipment Transport Transport Transport Transport Transport Transport Radio None None None None None None None None For AMR calls, this parameter, together with value If the of this parameter is too small, the None This parameter is used in handover decision. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Transport Transport Transport Equipment Transport Transport Radio Radio Radio Radio Radio This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. This parameter is used in handover decision. The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None Not involved None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Equipment None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None the impact on When The same parameter coverage modificatio cell allows n has no the load impact on None None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Equipment Equipment Equipment Equipment None BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Transport Radio None None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Radio Equipment Transport Equipment Equipment None None The setting of this parameter must be negotiated None 1. If you set the start date or end date of DST to None If the parameter "IBCA Allowed" is set to YES, None The level values 0 through 63 map to 110 dBm The parameter value correspond s to RQ The level values 0 through 63 map to 110 dBm The parameter value correspond s to RQ The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None If this switch is set to ON, the call access The greater the value of this parameter BSC6900 V900R011 Radio BSC6900 V900R011 Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio The SDCCH dynamic adjustment converts The setting of this parameter must be negotiated None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None If this function is enabled after encryption The TRX is shut down automatica lly, and the capacity of If this parameter is set to a greater value, the None If this parameter is set to a greater value, the If this parameter is set to a greater value, the None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Radio Equipment Radio Radio Radio Radio Transport Transport Equipment None BSC6900 V900R011 Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter should be modificatio set on the n has no basis of impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None the When neighborin g 3G cell is configured and the None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Radio Equipment Radio Radio Radio Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BTS should be reset to validate the parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The BSC should be reset to validate the parameter The BTS should be reset to validate the parameter The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Equipment Equipment Equipment Equipment Equipment Equipment Equipment Transport Equipment None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The ratio impact on The of the parameter subscriber modificatio s n has no accessing impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Equipment Equipment Equipment Equipment Equipment Radio Equipment Equipment Equipment Equipment The parameter modificatio n has no None impact on None If this The SGSN is parameter the last modificatio SGSN n has no connecting impact on None The parameter modificatio n has no None impact on None The parameter cannot be Not modified. involved None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter modificatio n has no None impact on None The parameter cannot be Not modified. involved None The parameter cannot be Not modified. involved None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Equipment Radio Radio BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport The parameter cannot be modified. The ratio of Gb interface signaling messages None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Transport None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Transport Radio Radio Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The source impact on The IP address parameter can be: modificatio local IP n has no address of impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None BSC6900 V900R011 Equipment None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Not involved BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment The modified parameter takes effect after The parameter modificatio n has no impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The value impact on The of this parameter parameter modificatio cannot be n has no changed. impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved None Versions earlier than BSC6900 V900R011 Transport None None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Transport Transport The parameter cannot be modified. 1. The block of Ater interface must be The parameter cannot be modified. Not involved None The parameter modificatio n has no impact on None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved Not involved None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Equipment Equipment Equipment Equipment Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment The parameter cannot be Not modified. involved The transport path should be reNone established This The parameter parameter can be modificatio modified n has no only when impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Equipment Radio Equipment Equipment Equipment Equipment Equipment Equipment Transport Transport The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter should be modificatio set on the n has no basis of impact on This The parameter parameter should be modificatio set on the n has no basis of impact on This The parameter parameter should be modificatio set on the n has no basis of impact on This The parameter parameter should be modificatio set on the n has no basis of impact on This The parameter parameter is modificatio supported n has no only by the impact on This The parameter parameter is modificatio supported n has no only by the impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 This parameter Versions can be earlier than used to BSC6900 control V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Transport Equipment Transport Radio Equipment Equipment Radio Radio Radio Radio Radio Radio This parameter is supported only port The by the can be set to the DOWN or UP state None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Radio None If this parameter is set to a greater value, the If this parameter is set to a greater value, the None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Radio Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Equipment None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The BTS should be reset to validate the None parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Equipment Equipment Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Clock The sources parameter and modificatio priorities n has no are in one- impact on Clock The sources parameter and modificatio priorities n has no are in one- impact on The parameter modificatio n has no None impact on None None None None None None None Not involved None None None None Not involved None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Radio Equipment Radio Equipment Equipment Equipment Radio Transport Radio Radio The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved Clock The sources parameter and modificatio priorities n has no are in one- impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved 1. The The block of parameter Ater modificatio interface n has no must be impact on The parameter modificatio n does not None impact the None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Transport Equipment Transport Equipment Equipment Transport Transport Transport None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The transport path should be reNone established This The parameter transport can be path should modified be reonly when established 1. The The command parameter is used for modificatio the n has no configurati impact on 1. The The command parameter is used for modificatio the n has no configurati impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If the The interface parameter board modificatio clock n has no source of impact on The parameter modificatio n has no None The ratio impact on The of Gb parameter interface modificatio signaling n has no messages impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None Versions earlier than BSC6900 V900R011 Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, it is V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio Equipment Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, it is V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Radio Equipment Radio Equipment Equipment Equipment Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on In The principle, parameter you should modificatio not n has no configure impact on The parameter modificatio n has no None impact on 1. The The block of A parameter interface modificatio must be n has no configured. impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Radio Equipment Equipment Transport Equipment Equipment Equipment Equipment Equipment None This parameter is supported only by the None 1. The block of Ater interface must be 1. The block of A interface must be configured. None None None None None None None The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The transport path should be reestablished The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Transport Transport Radio Equipment Equipment Equipment Radio Equipment Equipment The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is modificatio supported n has no only by the impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None Versions earlier than BSC6900 V900R011 Transport None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment Transport Radio None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The adjacent parameter node ID modificatio must be n has no configured. impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The transport path should be reNone established None Versions earlier than BSC6900 V900R011 Radio None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Equipment Equipment Transport Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None the impact on When The simple cell parameter broadcast modificatio function is n has no enabled, impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter should be modificatio set n has no according impact on The parameter modificatio n has no None impact on None None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Radio Radio Radio Radio Radio Equipment Equipment None BSC6900 V900R011 Radio None None None None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport None None None None Change this parameter will impact the patch Change this parameter will impact the patch Change this parameter will impact the patch Change this parameter will impact the patch Change this parameter will impact the patch Change this parameter will impact the patch Change this parameter will impact the patch Change this parameter will impact the patch The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment Not involved None None BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport Change this parameter will impact the patch Change this parameter will impact the patch None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Transport None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Equipment Equipment None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Equipment Radio Equipment Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Radio Equipment Radio Equipment Equipment Equipment None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Equipment None None If timer T200 is set to a smaller value, the If timer T200 is set to a smaller value, the If timer T200 is set to a smaller value, the If timer T200 is set to a smaller value, the If timer T200 is set to a smaller value, the BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The physical parameter information modificatio is sent n has no over the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If timer T200 is set to a smaller value, the If timer T200 is set to a smaller value, the None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Transport Transport Transport Equipment None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Radio Radio It is recommen ded that you select a greater None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a smaller value, the None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Transport Equipment Transport Equipment Transport Equipment Equipment Transport Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Radio Radio Radio Radio Radio Radio None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Radio Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None According impact on The to the GSM parameter protocols, modificatio the n has no BSC6900 impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, this V900R011 When parameter is set to a large BSC6900 value, the V900R011 When this parameter is set to a large BSC6900 value, the V900R011 When this parameter is set to a large BSC6900 value, the V900R011 Equipment Equipment Radio Transport Equipment Equipment Equipment Radio Radio Radio Radio Radio None None None None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on When this parameter is set to a large value, the When this parameter is set to a large value, the When this parameter is set to a large value, the If this parameter is set to a greater value, the BSC6900 V900R011 Radio BSC6900 V900R011 Radio None None If this parameter is set to a smaller value, the If this parameter is set to ON, the calls are If this parameter is set to a greater value, the If this parameter is set to a greater value, the None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Transport None BSC6900 V900R011 Transport None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Before The switched parameter on, please modificatio insure that n has no all the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved 1. The The command parameter is used for modificatio the n has no configurati impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Transport Transport Equipment 1. The command is used for the configurati None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The radio link should be reestablish None ed after the The parameter modificatio n has no None impact on For the The BTS3001C parameter , modificatio BTS3001C n has no P, and impact on The parameter modificatio n has no None impact on None BSC6900 V900R011 Radio None None None None None None None If both TFO and AEC functions are BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Equipment Equipment Radio Equipment Radio BSC6900 V900R011 Equipment None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment None The IP address of the TGW cannot use the IP The address of the TGW cannot use the None The IP address of the TGW cannot use the None This parameter is supported only by the This parameter is supported only by the None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Equipment None BSC6900 V900R011 Transport None BSC6900 V900R011 Transport None BSC6900 V900R011 Equipment None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Radio Radio Radio Radio Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The If this parameter parameter Versions modificatio is set to a earlier than n has no greater BSC6900 None impact on value, the V900R011 The If this parameter parameter Versions modificatio is set to a earlier than n has no greater BSC6900 None impact on value, the V900R011 The If this parameter parameter modificatio is set to a n has no greater BSC6900 None impact on value, the V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Radio Radio Radio Radio Radio Transport Equipment Radio Radio Radio Radio Radio The parameter modificatio n has no None Multi-band impact on The networks parameter cannot use modificatio the TIGHT n has no BCCH impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Equipment None BSC6900 V900R011 Equipment None If this parameter is set to a greater value, cell If this parameter is set to a greater value, it is If this parameter is set to a greater value, call None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Radio Transport Transport The parameter cannot be modified. The parameter cannot be modified. Versions earlier than Not BSC6900 involved None V900R011 Versions earlier than Not BSC6900 involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The If this parameter parameter Versions modificatio is set to a earlier than n has no greater BSC6900 None impact on value, it is V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The If this parameter parameter Versions modificatio is set to a earlier than n has no greater BSC6900 None impact on value, it is V900R011 The If this parameter parameter Versions modificatio is set to a earlier than n has no greater BSC6900 None impact on value, V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 Transport Transport Equipment Radio Transport Radio Radio Radio Radio Radio Equipment Equipment None None None None None None None None None The parameter cannot be modified. The TRMMAP must be configured. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None Not involved None The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Transport Transport Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on 1. If you The set "Upper parameter time modificatio threshold n has no of raised impact on The parameter modificatio n has no None impact on 1. If you The set "Upper parameter time modificatio threshold n has no of raised impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Transport Equipment Transport Equipment Equipment Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Radio Equipment Equipment Radio Equipment Equipment Equipment Equipment Equipment Radio None The parameter cannot be Not modified. involved The BTS should be reset to validate the None parameter The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The TRM load threshold must be configured The TRM load threshold must be configured The TRM load threshold must be configured The parameter cannot be modified. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None Versions earlier than BSC6900 V900R011 Equipment None None None Not involved None Not involved None Not involved None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None Not involved None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Transport Equipment Transport Transport Transport Transport Transport Transport None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved This The parameter parameter specifies modificatio whether to n has no enable the impact on The parameter modificatio n has no Nonethis impact on After The cell parameter should be is activated modified, after the the parameter The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Transport Transport Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Radio Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no Nonethis impact on After The cell parameter should be is activated modified, after the the parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved 1. The The block of parameter Ater modificatio interface n has no must be impact on 1. The The block of A parameter interface modificatio must be n has no configured. impact on Loopback The test, which parameter cause the modificatio service n has no interruption impact on None Versions earlier than BSC6900 V900R011 Radio None None None None None Not involved None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Equipment Equipment Equipment Equipment Radio Equipment Transport Transport Transport None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The The modificatio transport n of the path should PPP link be rethat is established The cell should be activated after the None parameter The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on None The transport path should be reestablished None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Radio Transport Transport None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Radio Radio Radio Transport None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment The parameter modificatio n has no None impact on The transport path should be reNone established The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to a modificatio great n has no value, the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Transport Radio Equipment BSC6900 None this V900R011 Radio When parameter is enabled, the fast BSC6900 flux V900R011 Radio Versions earlier than BSC6900 None V900R011 Radio None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified. The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None Not involved Not involved Not involved None None None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Transport Transport None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Equipment None BSC6900 V900R011 Radio None None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment None None None None None None None None None. None. None. None. The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None If the number of RACH conflicts in a cell is The parameter modificatio n impacts the The parameter modificatio n impacts the The parameter modificatio n impacts the The parameter modificatio n impacts the BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio None. None. None. None. None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The value impact on The cell of this should be parameter activated cannot be after the changed. parameter The The BSC modified should be parameter reset to takes validate the effect after parameter The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n impacts the The parameter modificatio n impacts the The parameter modificatio n impacts the The parameter modificatio n impacts the BSC6900 V900R011 Radio BSC6900 V900R011 Radio BSC6900 V900R011 Radio None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Transport Transport Radio Equipment Equipment Radio Equipment None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to 0, modificatio the n has no emergency impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Transport Transport Transport Transport Transport Transport Transport Transport Transport The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None RAI impact on When The alarms parameter occur on modificatio the E1 link, n has no services impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Equipment Transport Transport Transport Transport Transport Transport Transport Transport The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The adjacent parameter node ID modificatio must be n has no configured. impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio must be n has no greater impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved None None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Equipment Transport Transport Transport Equipment Equipment Equipment Radio Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to a modificatio small n has no value, the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Equipment Equipment Radio Radio Radio Radio Radio Radio Radio None None None BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a smaller value, call None None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than smaller BSC6900 value, V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 None Radio Radio Radio Radio None None None None The setting of this parameter affects the triggering The setting of this parameter affects the triggering None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None If this parameter is set to a greater value, If this parameter is set to a smaller value, the If this parameter is set to a smaller value, the None None If this parameter is set to a greater value, If this parameter is set to a greater value, None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None None None None None None None None None None None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None None If this parameter is set to a greater value, If this parameter is set to a greater value, The coding rate and MOS are affected. The coding rate and MOS are affected. The coding rate and MOS are affected. None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio None BSC6900 V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 Versions earlier than BSC6900 None None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 None value, call V900R011 Versions earlier than BSC6900 None None V900R011 The Versions parameter earlier than cannot be Not BSC6900 modified. involved None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 The parameter Versions modificatio earlier than n has no BSC6900 None impact on None V900R011 None None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None BSC6900 V900R011 Radio Radio Radio Radio Equipment Radio Radio Transport Equipment Equipment Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter transport can be path should modified be reonly when established The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on This The parameter transport can be path should modified be reonly when established The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None None None Not involved None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Equipment Equipment Equipment Equipment Radio Equipment Radio Equipment Radio Equipment Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on This The parameter parameter is modificatio supported n has no only by the impact on The parameter modificatio n has no None impact on In a The GSM900 parameter cell, the modificatio power n has no control impact on The parameter cannot be Not modified. involved None Versions earlier than BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Radio Radio Radio Radio Transport Radio Transport The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Pay The special parameter attention to modificatio the setting n has no of this impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, the V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Transport Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None The setting impact on The of this parameter parameter modificatio must be n has no greater impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Equipment Radio Equipment BSC6900 V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 None Equipment Equipment Equipment Equipment Radio Radio Radio Radio None None None None None None None None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on If this parameter is set to a greater value, If this parameter is set to a greater value, None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Radio Equipment None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None BSC6900 V900R011 Radio None None None None None BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Transport Transport Transport Transport Incorrect setting of this parameter can lead to The parameter cannot be modified. The parameter modificatio n has no impact on None None The parameter cannot be modified. Incorrect setting of this parameter can lead to Incorrect setting of this parameter can lead to The existing networking can be affected Not involved None The parameter modificatio n has no impact on None None None None None None Not involved The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on Not involved None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Transport Transport Transport Transport Transport Transport Transport Radio Equipment Equipment The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on If this The parameter parameter is set to a modificatio smaller n has no value, the impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 Versions earlier than BSC6900 None V900R011 If this parameter Versions is set to a earlier than greater BSC6900 value, V900R011 Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Equipment Radio The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None timer impact on If the The is set to a parameter greater modificatio value, the n has no time of impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter cannot be Not modified. involved If this parameter is set to a greater value, If this parameter is set to a greater value, None None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Radio Radio Equipment Radio Radio Equipment Equipment Equipment Equipment Equipment Equipment Transport None None The parameter cannot be Not modified. involved The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The parameter modificatio n has no None impact on The The conversion parameter from E1 to modificatio T1 or from n has no T1 to E1 impact on The parameter modificatio n has no impact on None The parameter modificatio n has no impact on None None None None None None None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Equipment Transport Equipment Equipment Equipment Equipment Equipment Equipment Equipment None None BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport None None None None None The parameter cannot be Not modified. involved None The parameter modificatio n has no None impact on None The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on The parameter modificatio n has no impact on None None None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Transport Transport Equipment Radio Transport Equipment
Copyright © 2024 DOKUMEN.SITE Inc.