Brosura Curele RED Power 03

Products & ApplicationsRED POWER  3 Wedge Belts & Kraftbands maintenance-free Drive solutions with Optibelt Crème de la Crème: Wrapped wedge belts and kraftbands . • maintenance-free • Set Constant The Optibelt RED POWER 3 is available in all standard profiles and lengths ranges from 1200 mm up to 12.000 mm.RED   POWER  3            S=C  PLUS optibelt  Optibelt RED POWER 3 high performance wedge belts and ­kraftbands have been specially developed for applications in the mechanical engineering sector. The following advantages speak in favour of RED POWER 3 belts: • up to 50 % higher power ratings • maintenance-free • up to 97 % efficiency • antistatic according to ISO 1813. • strong power rating • environmentally friendly . compatible with ATEX • suitable for back bend ­idlers • S=C Set Constant • extended service life • less downtimes • up to +100 °C temperature resistant The solution is RED POWER 3. The ­Optibelt RED POWER 3 can achieve significantly more – up to 97 %.000 hrs. The narrowest tolerances and always at nominal size 97 % efficiency Standard V-belts achieve a maximum efficiency of 94 %.Maintenance-free While standard belts require regular re-tensioning of up to 10 times during an estimated theoretical operating life of 25. effort and costs are eliminated. additional time. Thus. money and energy. Thus saving time. Better performance due to higher efficiency optibelt     RED POWER 3 . RED POWER 3 V-belts and ­kraftbands require no maintenance at all. Once Installed: No more re-tensioning S=C PLUS The name says it all: Optibelt S=C PLUS describes our Set Constant V-belts – not only within the tolerance ranges of national and ­international standards. 000 hours. Ø 900 mm 100 mm 25.000 hours 10 times The same drive.Cost savings – no extra cost! A practical example 16 hours a day.000 hours not required Cost savings for the drive system:  approx. 260 days a year: continuous operation in a pelletizing press in a feeding stuff factory. Ø 170 mm 8 grooves. Based on an operational life of 25. Ø 900 mm 158 mm 25. Ø 170 mm 5 grooves. 35 % . the running time is more than 6 years. retrofitted with the improved RED POWER 3 With 5 “RED POWER 3“ Driver pulley Driven pulley Pulley face width Theoretical belt life Retensioning SPB 3750 Ld 5 grooves. With 8 standard belts Driver pulley Driven pulley Pulley face width Theoretical belt life Retensioning SPB 3750 Ld 8 grooves. cost reductions of up to 35 %. value-for-money and environmentally friendly. V-grooved pulleys: all standard pulleys. Profiles SPB SPC 3V/9J 5V/15J 8V/25J Dimensions 2000 – 8000 3000 – 10 000 50 – 140 56 – 315 100 – 475 Kraftband pulleys: all standard pulleys. at the same time. A technological first-class performance according to DIN 7753 Part 1/ ISO 4184 and USA Standard RMA/MPTA Optibelt KB RED POWER 3 kraftbands are made of high quality wrapped Optibelt RED POWER 3 V-belts joined by a highly wear resistant top surface. special pulleys on request. Optibelt KB RED POWER 3 kraftbands are powerful.optibelt     RED POWER 3 according to DIN 7753 Part 1/ ISO 4184 and USA Standard RMA/MPTA Optibelt RED POWER 3 S=C PLUS high performance wedge belts and kraftbands provide up to 50 % more power and. Profiles SPZ SPA SPB SPC 3V/9N 5V/15N 8V/25N High performance kraftbands High performance wedge belts ree f e c n a n mainte Dimensions 1202 – 3550 mm 1207 – 4000 mm 1250 – 8000 mm 2000 – 10 000 mm 47.5 – 140 inch 53 – 315 inch 100 – 475 inch Further lengths on request. special pulleys on request. low-stretch. mm mm inch inch inch . Due to their unique construction. In many cases re-tensioning is not done. RED POWER 3 belts keep their tension throughout their service life without the need for re-tensioning.1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 Wedge belt ISO Wedge belt RMA Kraftband ISO 1 Transverse fibre compound made of polychloroprene 1 Transverse fibre compound made of polychloroprene 1 Top surface 2 Polyester tension cord/ maintenance-free 2 Polyester tension cord/ maintenance-free 3 Transverse fibre compound made of polychloroprene 3 Transverse fibre compound made of polychloroprene 4 Core with transversely aligned fibre layer 4 Core with transversely aligned fibre layer 5 Abrasion resistant cover fabric 5 Abrasion resistant cover fabric 2 Transverse fibre compound made of polychloroprene 3 Polyester tension cord/maintenance-free 4 Transverse fibre compound made of polychloroprene 5 Core with transversely aligned fibre layer 6 Abrasion resistant cover fabric Graph: shaft load loss with wedge belt SPB 2000 Result Test conditions: Brake power P Speed n Guide diameter dd (driver/driven pulley) = 12 kW = 1750 rpm = 140 mm Shaft load at start Sa = 1430 N Shaft load (N) (no start-up period) RED POWER 3 Optibelt standard low stretch Competition 1 Optibelt standard Competition 2 Critical shaft load (excessive belt slip) Competition 3 Test hours Start 20 minutes 1 hr Optibelt certified test results 24 hrs 48 hrs Standard V-belts loose tension over time and require regular re-tensioning if they are to work efficiently and achieve their potential belt life. . They are proven to deliver significant savings in the areas of maintenance. reduced belt life and excessive downtime. resulting in increased energy consumption. energy and belt purchase costs and furthermore achieve an increase in productivity. optibelt.Avoid service intervals – no maintenance costs Eliminate production downtimes – optimising production processes Prevent losses due to stoppages – extending machine running times www.com © Arntz Optibelt Group 314020/0112Hux Optibelt RED POWER 3 – Gain a headstart through advance in technology .com info@optibelt.